4639 files changed, 248126 insertions, 297383 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 9d055b4..acda512 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -3,11 +3,9 @@
 #
 
 config OPROFILE
-	tristate "OProfile system profiling (EXPERIMENTAL)"
+	tristate "OProfile system profiling"
 	depends on PROFILING
 	depends on HAVE_OPROFILE
-	depends on TRACING_SUPPORT
-	select TRACING
 	select RING_BUFFER
 	select RING_BUFFER_ALLOW_SWAP
 	help
@@ -17,20 +15,6 @@ config OPROFILE
 
 	  If unsure, say N.
 
-config OPROFILE_IBS
-	bool "OProfile AMD IBS support (EXPERIMENTAL)"
-	default n
-	depends on OPROFILE && SMP && X86
-	help
-          Instruction-Based Sampling (IBS) is a new profiling
-          technique that provides rich, precise program performance
-          information. IBS is introduced by AMD Family10h processors
-          (AMD Opteron Quad-Core processor "Barcelona") to overcome
-          the limitations of conventional performance counter
-          sampling.
-
-	  If unsure, say N.
-
 config OPROFILE_EVENT_MULTIPLEX
 	bool "OProfile multiplexing support (EXPERIMENTAL)"
 	default n
@@ -57,6 +41,12 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config OPTPROBES
+	def_bool y
+	depends on KPROBES && HAVE_OPTPROBES
+	depends on !PREEMPT
+	select KALLSYMS_ALL
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -99,6 +89,8 @@ config HAVE_KPROBES
 config HAVE_KRETPROBES
 	bool
 
+config HAVE_OPTPROBES
+	bool
 #
 # An arch should select this if it provides all these things:
 #
@@ -121,6 +113,14 @@ config HAVE_DMA_ATTRS
 config USE_GENERIC_SMP_HELPERS
 	bool
 
+config HAVE_REGS_AND_STACK_ACCESS_API
+	bool
+	help
+	  This symbol should be selected by an architecure if it supports
+	  the API needed to access registers and stack entries from pt_regs,
+	  declared in asm/ptrace.h
+	  For example the kprobes-based event tracer needs this API.
+
 config HAVE_CLK
 	bool
 	help
@@ -137,6 +137,17 @@ config HAVE_HW_BREAKPOINT
 	bool
 	depends on PERF_EVENTS
 
+config HAVE_MIXED_BREAKPOINTS_REGS
+	bool
+	depends on HAVE_HW_BREAKPOINT
+	help
+	  Depending on the arch implementation of hardware breakpoints,
+	  some of them have separate registers for data and instruction
+	  breakpoints addresses, others have mixed registers to store
+	  them but define the access type in a control register.
+	  Select this option if your arch implements breakpoints under the
+	  latter fashion.
+
 config HAVE_USER_RETURN_NOTIFIER
 	bool
 
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index bd7261e..3e2e540 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -10,6 +10,7 @@ config ALPHA
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_PERF_EVENTS
+	select HAVE_DMA_ATTRS
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -50,14 +51,19 @@ config GENERIC_TIME
 	bool
 	default y
 
-config ARCH_USES_GETTIMEOFFSET
-	bool
-	default y
+config GENERIC_CMOS_UPDATE
+        def_bool y
 
 config ZONE_DMA
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index 3c8d1b2..be61670 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -8,6 +8,7 @@
  * based significantly on the arch/alpha/boot/main.c of Linus Torvalds
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index ade3f12..c98865f 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -10,6 +10,7 @@
  * and the decompression code from MILO.
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index 644b7db5..ded57d9 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -6,6 +6,7 @@
  * This file is the bootloader for the Linux/AXP kernel
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index 3047a1b..3ff9a95 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 610dff4..e756d04 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -17,8 +17,8 @@
 #define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
 #define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
 
-#define atomic_read(v)		((v)->counter + 0)
-#define atomic64_read(v)	((v)->counter + 0)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		((v)->counter = (i))
 #define atomic64_set(v,i)	((v)->counter = (i))
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 15f3ae2..adfab8a 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -405,29 +405,31 @@ static inline int fls(int x)
 
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 /* Whee.  EV67 can calculate it directly.  */
-static inline unsigned long hweight64(unsigned long w)
+static inline unsigned long __arch_hweight64(unsigned long w)
 {
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
-	return hweight64(w);
+	return __arch_hweight64(w);
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
-	return hweight64(w & 0xffff);
+	return __arch_hweight64(w & 0xffff);
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
-	return hweight64(w & 0xff);
+	return __arch_hweight64(w & 0xff);
 }
 #else
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
 #endif
 
+#include <asm-generic/bitops/const_hweight.h>
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/bitops/find.h>
@@ -436,22 +438,20 @@ static inline unsigned int hweight8(unsigned int w)
 
 /*
  * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is set.
+ * way of searching a 100-bit bitmap.  It's guaranteed that at least
+ * one of the 100 bits is cleared.
  */
 static inline unsigned long
-sched_find_first_bit(unsigned long b[3])
+sched_find_first_bit(const unsigned long b[2])
 {
-	unsigned long b0 = b[0], b1 = b[1], b2 = b[2];
-	unsigned long ofs;
+	unsigned long b0, b1, ofs, tmp;
 
-	ofs = (b1 ? 64 : 128);
-	b1 = (b1 ? b1 : b2);
-	ofs = (b0 ? 0 : ofs);
-	b0 = (b0 ? b0 : b1);
+	b0 = b[0];
+	b1 = b[1];
+	ofs = (b0 ? 0 : 64);
+	tmp = (b0 ? b0 : b1);
 
-	return __ffs(b0) + ofs;
+	return __ffs(tmp) + ofs;
 }
 
 #include <asm-generic/bitops/ext2-non-atomic.h>
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index 30d55fe..dad300f 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -12,7 +12,6 @@
 #define __ALPHA_MARVEL__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/spinlock.h>
 
 #include <asm/compiler.h>
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index acf55b4..21ac533 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -6,7 +6,6 @@
 #define MCPCIA_ONE_HAE_WINDOW 1
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h
index a17f6f3..8cf79d1 100644
--- a/arch/alpha/include/asm/core_titan.h
+++ b/arch/alpha/include/asm/core_titan.h
@@ -2,7 +2,6 @@
 #define __ALPHA_TITAN__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h
index 58d4fe4..8e39ecf 100644
--- a/arch/alpha/include/asm/core_tsunami.h
+++ b/arch/alpha/include/asm/core_tsunami.h
@@ -2,7 +2,6 @@
 #define __ALPHA_TSUNAMI__H__
 
 #include <linux/types.h>
-#include <linux/pci.h>
 #include <asm/compiler.h>
 
 /*
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 04eb568..1bce816 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -1,71 +1,49 @@
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 
+#include <linux/dma-attrs.h>
 
-#ifdef CONFIG_PCI
+extern struct dma_map_ops *dma_ops;
 
-#include <linux/pci.h>
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	return dma_ops;
+}
 
-#define dma_map_single(dev, va, size, dir)		\
-		pci_map_single(alpha_gendev_to_pci(dev), va, size, dir)
-#define dma_unmap_single(dev, addr, size, dir)		\
-		pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_alloc_coherent(dev, size, addr, gfp)	\
-	      __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
-#define dma_free_coherent(dev, size, va, addr)		\
-		pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
-#define dma_map_page(dev, page, off, size, dir)		\
-		pci_map_page(alpha_gendev_to_pci(dev), page, off, size, dir)
-#define dma_unmap_page(dev, addr, size, dir)		\
-		pci_unmap_page(alpha_gendev_to_pci(dev), addr, size, dir)
-#define dma_map_sg(dev, sg, nents, dir)			\
-		pci_map_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_unmap_sg(dev, sg, nents, dir)		\
-		pci_unmap_sg(alpha_gendev_to_pci(dev), sg, nents, dir)
-#define dma_supported(dev, mask)			\
-		pci_dma_supported(alpha_gendev_to_pci(dev), mask)
-#define dma_mapping_error(dev, addr)				\
-		pci_dma_mapping_error(alpha_gendev_to_pci(dev), addr)
+#include <asm-generic/dma-mapping-common.h>
 
-#else	/* no PCI - no IOMMU. */
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
+{
+	return get_dma_ops(dev)->alloc_coherent(dev, size, dma_handle, gfp);
+}
 
-#include <asm/io.h>	/* for virt_to_phys() */
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *vaddr, dma_addr_t dma_handle)
+{
+	get_dma_ops(dev)->free_coherent(dev, size, vaddr, dma_handle);
+}
 
-struct scatterlist;
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction direction);
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return get_dma_ops(dev)->mapping_error(dev, dma_addr);
+}
 
-#define dma_free_coherent(dev, size, va, addr)		\
-		free_pages((unsigned long)va, get_order(size))
-#define dma_supported(dev, mask)		(mask < 0x00ffffffUL ? 0 : 1)
-#define dma_map_single(dev, va, size, dir)	virt_to_phys(va)
-#define dma_map_page(dev, page, off, size, dir)	(page_to_pa(page) + off)
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->dma_supported(dev, mask);
+}
 
-#define dma_unmap_single(dev, addr, size, dir)	((void)0)
-#define dma_unmap_page(dev, addr, size, dir)	((void)0)
-#define dma_unmap_sg(dev, sg, nents, dir)	((void)0)
-
-#define dma_mapping_error(dev, addr)  (0)
-
-#endif	/* !CONFIG_PCI */
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	return get_dma_ops(dev)->set_dma_mask(dev, mask);
+}
 
 #define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)			(1)
 
-int dma_set_mask(struct device *dev, u64 mask);
-
-#define dma_sync_single_for_cpu(dev, addr, size, dir)	  ((void)0)
-#define dma_sync_single_for_device(dev, addr, size, dir)  ((void)0)
-#define dma_sync_single_range(dev, addr, off, size, dir)  ((void)0)
-#define dma_sync_sg_for_cpu(dev, sg, nents, dir)	  ((void)0)
-#define dma_sync_sg_for_device(dev, sg, nents, dir)	  ((void)0)
 #define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir)	((void)0)
-#define dma_sync_single_range_for_device(dev, addr, offset, size, dir)	((void)0)
-
 #define dma_get_cache_alignment()			  L1_CACHE_BYTES
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
index 6ad3ea6..b9e3e33 100644
--- a/arch/alpha/include/asm/local.h
+++ b/arch/alpha/include/asm/local.h
@@ -98,21 +98,4 @@ static __inline__ long local_sub_return(long i, local_t * l)
 #define __local_add(i,l)	((l)->a.counter+=(i))
 #define __local_sub(i,l)	((l)->a.counter-=(i))
 
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations.  Note they take
- * a variable, not an address.
- */
-#define cpu_local_read(l)	local_read(&__get_cpu_var(l))
-#define cpu_local_set(l, i)	local_set(&__get_cpu_var(l), (i))
-
-#define cpu_local_inc(l)	local_inc(&__get_cpu_var(l))
-#define cpu_local_dec(l)	local_dec(&__get_cpu_var(l))
-#define cpu_local_add(i, l)	local_add((i), &__get_cpu_var(l))
-#define cpu_local_sub(i, l)	local_sub((i), &__get_cpu_var(l))
-
-#define __cpu_local_inc(l)	__local_inc(&__get_cpu_var(l))
-#define __cpu_local_dec(l)	__local_dec(&__get_cpu_var(l))
-#define __cpu_local_add(i, l)	__local_add((i), &__get_cpu_var(l))
-#define __cpu_local_sub(i, l)	__local_sub((i), &__get_cpu_var(l))
-
 #endif /* _ALPHA_LOCAL_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index dd8dcab..28d0497 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -70,142 +70,11 @@ extern inline void pcibios_penalize_isa_irq(int irq, int active)
    decisions.  */
 #define PCI_DMA_BUS_IS_PHYS  0
 
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDRP to the pci side dma address as well,
-   else DMA_ADDRP is undefined.  */
-
-extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
-				    dma_addr_t *, gfp_t);
-static inline void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
-{
-	return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must
-   be the same as what as passed into pci_alloc_consistent.
-   References to the memory and mappings associated with CPU_ADDR or
-   DMA_ADDR past this call are illegal.  */
-
-extern void pci_free_consistent(struct pci_dev *, size_t, void *, dma_addr_t);
-
-/* Map a single buffer of the indicate size for PCI DMA in streaming mode.
-   The 32-bit PCI bus mastering address to use is returned.  Once the device
-   is given the dma address, the device owns this memory until either
-   pci_unmap_single or pci_dma_sync_single_for_cpu is performed.  */
-
-extern dma_addr_t pci_map_single(struct pci_dev *, void *, size_t, int);
-
-/* Likewise, but for a page instead of an address.  */
-extern dma_addr_t pci_map_page(struct pci_dev *, struct page *,
-			       unsigned long, size_t, int);
-
-/* Test for pci_map_single or pci_map_page having generated an error.  */
-
-static inline int
-pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
-{
-	return dma_addr == 0;
-}
-
-/* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
-   SIZE must match what was provided for in a previous pci_map_single
-   call.  All other usages are undefined.  After this call, reads by
-   the cpu to the buffer are guaranteed to see whatever the device
-   wrote there.  */
-
-extern void pci_unmap_single(struct pci_dev *, dma_addr_t, size_t, int);
-extern void pci_unmap_page(struct pci_dev *, dma_addr_t, size_t, int);
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-/* Map a set of buffers described by scatterlist in streaming mode for
-   PCI DMA.  This is the scatter-gather version of the above
-   pci_map_single interface.  Here the scatter gather list elements
-   are each tagged with the appropriate PCI dma address and length.
-   They are obtained via sg_dma_{address,length}(SG).
-
-   NOTE: An implementation may be able to use a smaller number of DMA
-   address/length pairs than there are SG table elements.  (for
-   example via virtual mapping capabilities) The routine returns the
-   number of addr/length pairs actually used, at most nents.
-
-   Device ownership issues as mentioned above for pci_map_single are
-   the same here.  */
-
-extern int pci_map_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Unmap a set of streaming mode DMA translations.  Again, cpu read
-   rules concerning calls here are the same as for pci_unmap_single()
-   above.  */
-
-extern void pci_unmap_sg(struct pci_dev *, struct scatterlist *, int, int);
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer and device currently has ownership
-   of the buffer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *dev, dma_addr_t dma_addr,
-			    long size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *dev, dma_addr_t dma_addr,
-			       size_t size, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_*
-   but for a scatter-gather list, same rules and usage.  */
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *dev, struct scatterlist *sg,
-			int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *dev, struct scatterlist *sg,
-			   int nents, int direction)
-{
-	/* Nothing to do.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
-   be supported properly.  For example, if your device can
-   only drive the low 24-bits during PCI bus mastering, then
-   you would pass 0x00ffffff as the mask to this function.  */
+#ifdef CONFIG_PCI
 
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
 
-#ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
 					unsigned long *strategy_parameter)
@@ -244,8 +113,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 	return hose->need_domain_info;
 }
 
-struct pci_dev *alpha_gendev_to_pci(struct device *dev);
-
 #endif /* __KERNEL__ */
 
 /* Values for the `which' argument to sys_pciconfig_iobase.  */
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 3f0c59f..71a2432 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -329,7 +329,7 @@ extern pgd_t swapper_pg_dir[1024];
  * tables contain all the necessary information.
  */
 extern inline void update_mmu_cache(struct vm_area_struct * vma,
-	unsigned long address, pte_t pte)
+	unsigned long address, pte_t *ptep)
 {
 }
 
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index 32c7a5c..65cf3e2 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -68,6 +68,7 @@ struct switch_stack {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()		(1)
 #define user_mode(regs) (((regs)->ps & 8) != 0)
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 440747c..5728c52 100644
--- a/arch/alpha/include/asm/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
@@ -1,24 +1,7 @@
 #ifndef _ALPHA_SCATTERLIST_H
 #define _ALPHA_SCATTERLIST_H
 
-#include <asm/page.h>
-#include <asm/types.h>
-  
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-
-	unsigned int length;
-
-	dma_addr_t dma_address;
-	__u32 dma_length;
-};
-
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (~0UL)
 
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index b3e8886..6f32f9c 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -77,7 +77,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_NOPRINT		10	/* see sysinfo.h */
 #define TIF_UAC_NOFIX		11
 #define TIF_UAC_SIGBUS		12
-#define TIF_MEMDIE		13
+#define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 7739a62..5a62fb4 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 5f2cf23..7f912ba 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -18,7 +18,6 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/irq.h>
diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
deleted file mode 100644
index 342b56d..0000000
--- a/arch/alpha/kernel/ns87312.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 62619f2..de9d397 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -20,7 +20,6 @@
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/utsname.h>
 #include <linux/time.h>
@@ -37,6 +36,7 @@
 #include <linux/uio.h>
 #include <linux/vfs.h>
 #include <linux/rcupdate.h>
+#include <linux/slab.h>
 
 #include <asm/fpu.h>
 #include <asm/io.h>
@@ -361,7 +361,7 @@ osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
 SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 		int, flag, void __user *, data)
 {
-	int retval = -EINVAL;
+	int retval;
 	char *name;
 
 	name = getname(path);
@@ -379,6 +379,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
 		retval = osf_procfs_mount(name, data, flag);
 		break;
 	default:
+		retval = -EINVAL;
 		printk("osf_mount(%ld, %x)\n", typenr, flag);
 	}
 	putname(name);
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
new file mode 100644
index 0000000..27dcbff
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.c
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff --git a/arch/alpha/kernel/pc873xx.h b/arch/alpha/kernel/pc873xx.h
new file mode 100644
index 0000000..25e1695
--- /dev/null
+++ b/arch/alpha/kernel/pc873xx.h
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index c19a376..246100e 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -7,6 +7,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 #include <linux/capability.h>
 #include <linux/mm.h>
 #include <linux/errno.h>
@@ -106,58 +107,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn,
 		return -ENODEV;
 }
 
-/* Stubs for the routines in pci_iommu.c: */
-
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
-{
-	return NULL;
-}
-
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
-{
-}
-
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size,
-	       int direction)
-{
-	return (dma_addr_t) 0;
-}
-
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
-{
-}
-
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
-{
-	return 0;
-}
-
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
-{
-}
-
-int
-pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
-{
-	return 0;
-}
-
-/* Generic DMA mapping functions: */
-
-void *
-dma_alloc_coherent(struct device *dev, size_t size,
-		   dma_addr_t *dma_handle, gfp_t gfp)
+static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -171,11 +122,22 @@ dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-EXPORT_SYMBOL(dma_alloc_coherent);
+static void alpha_noop_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_addr)
+{
+	free_pages((unsigned long)cpu_addr, get_order(size));
+}
+
+static dma_addr_t alpha_noop_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir,
+				      struct dma_attrs *attrs)
+{
+	return page_to_pa(page) + offset;
+}
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-	   enum dma_data_direction direction)
+static int alpha_noop_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+			     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -192,19 +154,37 @@ dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
 	return nents;
 }
 
-EXPORT_SYMBOL(dma_map_sg);
+static int alpha_noop_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static int alpha_noop_supported(struct device *dev, u64 mask)
+{
+	return mask < 0x00ffffffUL ? 0 : 1;
+}
 
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_noop_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_noop_ops = {
+	.alloc_coherent		= alpha_noop_alloc_coherent,
+	.free_coherent		= alpha_noop_free_coherent,
+	.map_page		= alpha_noop_map_page,
+	.map_sg			= alpha_noop_map_sg,
+	.mapping_error		= alpha_noop_mapping_error,
+	.dma_supported		= alpha_noop_supported,
+	.set_dma_mask		= alpha_noop_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_noop_ops;
+EXPORT_SYMBOL(dma_ops);
 
 void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 {
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 6ea822e..738fc82 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 
 static int hose_mmap_page_range(struct pci_controller *hose,
@@ -59,7 +60,8 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
+static int pci_mmap_resource(struct kobject *kobj,
+			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
@@ -88,14 +90,14 @@ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
 }
 
-static int pci_mmap_resource_sparse(struct kobject *kobj,
+static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
 				    struct bin_attribute *attr,
 				    struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
-static int pci_mmap_resource_dense(struct kobject *kobj,
+static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
 				   struct bin_attribute *attr,
 				   struct vm_area_struct *vma)
 {
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index a91ba28..c9ab94e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -126,8 +126,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
 #define MB			(1024*KB)
 #define GB			(1024*MB)
 
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
@@ -184,7 +184,7 @@ pcibios_align_resource(void *data, struct resource *res,
 		}
 	}
 
-	res->start = start;
+	return start;
 }
 #undef KB
 #undef MB
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 8449504..d1dbd9a 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -5,7 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/bootmem.h>
 #include <linux/scatterlist.h>
 #include <linux/log2.h>
@@ -216,10 +216,30 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
 	for (i = 0; i < n; ++i)
 		p[i] = 0;
 }
-
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/*
+ * True if the machine supports DAC addressing, and DEV can
+ * make use of it given MASK.
+ */
+static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
+{
+	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
+	int ok = 1;
+
+	/* If this is not set, the machine doesn't support DAC at all.  */
+	if (dac_offset == 0)
+		ok = 0;
+
+	/* The device has to be able to address our DAC bit.  */
+	if ((dac_offset & dev->dma_mask) != dac_offset)
+		ok = 0;
+
+	/* If both conditions above are met, we are fine. */
+	DBGA("pci_dac_dma_supported %s from %p\n",
+	     ok ? "yes" : "no", __builtin_return_address(0));
+
+	return ok;
+}
 
 /* Map a single buffer of the indicated size for PCI DMA in streaming
    mode.  The 32-bit PCI bus mastering address to use is returned.
@@ -301,23 +321,36 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	return ret;
 }
 
-dma_addr_t
-pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
+/* Helper for generic DMA-mapping functions. */
+static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
 {
-	int dac_allowed; 
+	if (dev && dev->bus == &pci_bus_type)
+		return to_pci_dev(dev);
 
-	if (dir == PCI_DMA_NONE)
-		BUG();
+	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
+	   BUG() otherwise. */
+	BUG_ON(!isa_bridge);
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, cpu_addr, size, dac_allowed);
+	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
+	   bridge is bus master then). */
+	if (!dev || !dev->dma_mask || !*dev->dma_mask)
+		return isa_bridge;
+
+	/* For EISA bus masters, return isa_bridge (it might have smaller
+	   dma_mask due to wiring limitations). */
+	if (*dev->dma_mask >= isa_bridge->dma_mask)
+		return isa_bridge;
+
+	/* This assumes ISA bus master with dma_mask 0xffffff. */
+	return NULL;
 }
-EXPORT_SYMBOL(pci_map_single);
 
-dma_addr_t
-pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
-	     size_t size, int dir)
+static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
+				     unsigned long offset, size_t size,
+				     enum dma_data_direction dir,
+				     struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
 	if (dir == PCI_DMA_NONE)
@@ -327,7 +360,6 @@ pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset,
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
 				size, dac_allowed);
 }
-EXPORT_SYMBOL(pci_map_page);
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
    SIZE must match what was provided for in a previous pci_map_single
@@ -335,16 +367,17 @@ EXPORT_SYMBOL(pci_map_page);
    the cpu to the buffer are guaranteed to see whatever the device
    wrote there.  */
 
-void
-pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		 int direction)
+static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+				 size_t size, enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
 {
 	unsigned long flags;
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (dma_addr >= __direct_map_base
@@ -393,25 +426,16 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
 	DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
 	      dma_addr, size, npages, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_unmap_single);
-
-void
-pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr,
-	       size_t size, int direction)
-{
-	pci_unmap_single(pdev, dma_addr, size, direction);
-}
-EXPORT_SYMBOL(pci_unmap_page);
 
 /* Allocate and map kernel buffer using consistent mode DMA for PCI
    device.  Returns non-NULL cpu-view pointer to the buffer if
    successful and sets *DMA_ADDRP to the pci side dma address as well,
    else DMA_ADDRP is undefined.  */
 
-void *
-__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-		       dma_addr_t *dma_addrp, gfp_t gfp)
+static void *alpha_pci_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_addrp, gfp_t gfp)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	void *cpu_addr;
 	long order = get_order(size);
 
@@ -439,13 +463,12 @@ try_again:
 		gfp |= GFP_DMA;
 		goto try_again;
 	}
-		
+
 	DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
 	      size, cpu_addr, *dma_addrp, __builtin_return_address(0));
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
@@ -453,17 +476,16 @@ EXPORT_SYMBOL(__pci_alloc_consistent);
    References to the memory and mappings associated with CPU_ADDR or
    DMA_ADDR past this call are illegal.  */
 
-void
-pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
-		    dma_addr_t dma_addr)
+static void alpha_pci_free_coherent(struct device *dev, size_t size,
+				    void *cpu_addr, dma_addr_t dma_addr)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
 	      dma_addr, size, __builtin_return_address(0));
 }
-EXPORT_SYMBOL(pci_free_consistent);
 
 /* Classify the elements of the scatterlist.  Write dma_address
    of each element with:
@@ -626,23 +648,21 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 	return 1;
 }
 
-int
-pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	   int direction)
+static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
+			    int nents, enum dma_data_direction dir,
+			    struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct scatterlist *start, *end, *out;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 	dma_addr_t max_dma;
 	int dac_allowed;
-	struct device *dev;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
-
-	dev = pdev ? &pdev->dev : NULL;
+	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
 	/* Fast path single entry scatterlists.  */
 	if (nents == 1) {
@@ -699,19 +719,19 @@ pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, direction);
+		pci_unmap_sg(pdev, start, out - start, dir);
 	return 0;
 }
-EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
    rules concerning calls here are the same as for pci_unmap_single()
    above.  */
 
-void
-pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
-	     int direction)
+static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction dir,
+			       struct dma_attrs *attrs)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	unsigned long flags;
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
@@ -719,7 +739,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	if (direction == PCI_DMA_NONE)
+	if (dir == PCI_DMA_NONE)
 		BUG();
 
 	if (! alpha_mv.mv_pci_tbi)
@@ -783,15 +803,13 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
 
 	DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg));
 }
-EXPORT_SYMBOL(pci_unmap_sg);
-
 
 /* Return whether the given PCI device DMA address mask can be
    supported properly.  */
 
-int
-pci_dma_supported(struct pci_dev *pdev, u64 mask)
+static int alpha_pci_supported(struct device *dev, u64 mask)
 {
+	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	struct pci_controller *hose;
 	struct pci_iommu_arena *arena;
 
@@ -818,7 +836,6 @@ pci_dma_supported(struct pci_dev *pdev, u64 mask)
 
 	return 0;
 }
-EXPORT_SYMBOL(pci_dma_supported);
 
 
 /*
@@ -918,66 +935,32 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 	return 0;
 }
 
-/* True if the machine supports DAC addressing, and DEV can
-   make use of it given MASK.  */
-
-static int
-pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
-{
-	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
-	int ok = 1;
-
-	/* If this is not set, the machine doesn't support DAC at all.  */
-	if (dac_offset == 0)
-		ok = 0;
-
-	/* The device has to be able to address our DAC bit.  */
-	if ((dac_offset & dev->dma_mask) != dac_offset)
-		ok = 0;
-
-	/* If both conditions above are met, we are fine. */
-	DBGA("pci_dac_dma_supported %s from %p\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
-
-	return ok;
-}
-
-/* Helper for generic DMA-mapping functions. */
-
-struct pci_dev *
-alpha_gendev_to_pci(struct device *dev)
+static int alpha_pci_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	if (dev && dev->bus == &pci_bus_type)
-		return to_pci_dev(dev);
-
-	/* Assume that non-PCI devices asking for DMA are either ISA or EISA,
-	   BUG() otherwise. */
-	BUG_ON(!isa_bridge);
-
-	/* Assume non-busmaster ISA DMA when dma_mask is not set (the ISA
-	   bridge is bus master then). */
-	if (!dev || !dev->dma_mask || !*dev->dma_mask)
-		return isa_bridge;
-
-	/* For EISA bus masters, return isa_bridge (it might have smaller
-	   dma_mask due to wiring limitations). */
-	if (*dev->dma_mask >= isa_bridge->dma_mask)
-		return isa_bridge;
-
-	/* This assumes ISA bus master with dma_mask 0xffffff. */
-	return NULL;
+	return dma_addr == 0;
 }
-EXPORT_SYMBOL(alpha_gendev_to_pci);
 
-int
-dma_set_mask(struct device *dev, u64 mask)
+static int alpha_pci_set_mask(struct device *dev, u64 mask)
 {
 	if (!dev->dma_mask ||
 	    !pci_dma_supported(alpha_gendev_to_pci(dev), mask))
 		return -EIO;
 
 	*dev->dma_mask = mask;
-
 	return 0;
 }
-EXPORT_SYMBOL(dma_set_mask);
+
+struct dma_map_ops alpha_pci_ops = {
+	.alloc_coherent		= alpha_pci_alloc_coherent,
+	.free_coherent		= alpha_pci_free_coherent,
+	.map_page		= alpha_pci_map_page,
+	.unmap_page		= alpha_pci_unmap_page,
+	.map_sg			= alpha_pci_map_sg,
+	.unmap_sg		= alpha_pci_unmap_sg,
+	.mapping_error		= alpha_pci_mapping_error,
+	.dma_supported		= alpha_pci_supported,
+	.set_dma_mask		= alpha_pci_set_mask,
+};
+
+struct dma_map_ops *dma_ops = &alpha_pci_ops;
+EXPORT_SYMBOL(dma_ops);
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 289039bb..395a464 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -17,7 +17,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/time.h>
 #include <linux/major.h>
@@ -28,6 +27,7 @@
 #include <linux/reboot.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 
 #include <asm/reg.h>
 #include <asm/uaccess.h>
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index e072041..baa9036 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
-#include <linux/slab.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 
@@ -249,6 +248,17 @@ ptrace_cancel_bpt(struct task_struct * child)
 	return (nsaved != 0);
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	/* Mark single stepping.  */
+	task_thread_info(child)->bpt_nsaved = -1;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	ptrace_cancel_bpt(child);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -256,7 +266,7 @@ ptrace_cancel_bpt(struct task_struct * child)
  */
 void ptrace_disable(struct task_struct *child)
 { 
-	ptrace_cancel_bpt(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -295,52 +305,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
 		ret = put_reg(child, addr, data);
 		break;
-
-	case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:    /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		/* make sure single-step breakpoint is gone. */
-		ptrace_cancel_bpt(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:  /* execute single instruction. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		/* Mark single stepping.  */
-		task_thread_info(child)->bpt_nsaved = -1;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		/* give it a chance to run. */
-		ret = 0;
-		break;
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
index bca5bda..0435921d 100644
--- a/arch/alpha/kernel/smc37c669.c
+++ b/arch/alpha/kernel/smc37c669.c
@@ -3,7 +3,6 @@
  */
 #include <linux/kernel.h>
 
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 2636cc0..3e6a289 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -4,7 +4,6 @@
 
 #include <linux/kernel.h>
 
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index dbbf04f..4afc1a1 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -30,6 +30,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index d64e1e4..4026502 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -224,7 +224,7 @@ static void
 dp264_device_interrupt(unsigned long vector)
 {
 #if 1
-	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n");
+	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
 #else
 	unsigned long pld;
 	unsigned int i;
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index d4327e4..85b4aea 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 2880533..9008d0f 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -171,7 +171,7 @@ titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 static void
 titan_device_interrupt(unsigned long vector)
 {
-	printk("titan_device_interrupt: NOT IMPLEMENTED YET!! \n");
+	printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
 }
 
 static void 
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 5d08266..1efbed8 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -51,6 +51,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
 #include <linux/timex.h>
+#include <linux/clocksource.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -75,8 +76,6 @@ static struct {
 	__u32 last_time;
 	/* ticks/cycle * 2^48 */
 	unsigned long scaled_ticks_per_cycle;
-	/* last time the CMOS clock got updated */
-	time_t last_rtc_update;
 	/* partial unused tick */
 	unsigned long partial_tick;
 } state;
@@ -91,6 +90,52 @@ static inline __u32 rpcc(void)
     return result;
 }
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned int year, mon, day, hour, min, sec, epoch;
+
+	sec = CMOS_READ(RTC_SECONDS);
+	min = CMOS_READ(RTC_MINUTES);
+	hour = CMOS_READ(RTC_HOURS);
+	day = CMOS_READ(RTC_DAY_OF_MONTH);
+	mon = CMOS_READ(RTC_MONTH);
+	year = CMOS_READ(RTC_YEAR);
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
+	}
+
+	/* PC-like is standard; used for year >= 70 */
+	epoch = 1900;
+	if (year < 20)
+		epoch = 2000;
+	else if (year >= 20 && year < 48)
+		/* NT epoch */
+		epoch = 1980;
+	else if (year >= 48 && year < 70)
+		/* Digital UNIX epoch */
+		epoch = 1952;
+
+	printk(KERN_INFO "Using epoch = %d\n", epoch);
+
+	if ((year += epoch) < 1970)
+		year += 100;
+
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+}
+
+
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -123,19 +168,6 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 	if (nticks)
 		do_timer(nticks);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced()
-	    && xtime.tv_sec > state.last_rtc_update + 660
-	    && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2
-	    && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		int tmp = set_rtc_mmss(xtime.tv_sec);
-		state.last_rtc_update = xtime.tv_sec - (tmp ? 600 : 0);
-	}
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -301,10 +333,38 @@ rpcc_after_update_in_progress(void)
 	return rpcc();
 }
 
+#ifndef CONFIG_SMP
+/* Until and unless we figure out how to get cpu cycle counters
+   in sync and keep them there, we can't use the rpcc.  */
+static cycle_t read_rpcc(struct clocksource *cs)
+{
+	cycle_t ret = (cycle_t)rpcc();
+	return ret;
+}
+
+static struct clocksource clocksource_rpcc = {
+	.name                   = "rpcc",
+	.rating                 = 300,
+	.read                   = read_rpcc,
+	.mask                   = CLOCKSOURCE_MASK(32),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
+};
+
+static inline void register_rpcc_clocksource(long cycle_freq)
+{
+	clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
+	clocksource_register(&clocksource_rpcc);
+}
+#else /* !CONFIG_SMP */
+static inline void register_rpcc_clocksource(long cycle_freq)
+{
+}
+#endif /* !CONFIG_SMP */
+
 void __init
 time_init(void)
 {
-	unsigned int year, mon, day, hour, min, sec, cc1, cc2, epoch;
+	unsigned int cc1, cc2;
 	unsigned long cycle_freq, tolerance;
 	long diff;
 
@@ -348,53 +408,17 @@ time_init(void)
 	   bogomips yet, but this is close on a 500Mhz box.  */
 	__delay(1000000);
 
-	sec = CMOS_READ(RTC_SECONDS);
-	min = CMOS_READ(RTC_MINUTES);
-	hour = CMOS_READ(RTC_HOURS);
-	day = CMOS_READ(RTC_DAY_OF_MONTH);
-	mon = CMOS_READ(RTC_MONTH);
-	year = CMOS_READ(RTC_YEAR);
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
-	}
-
-	/* PC-like is standard; used for year >= 70 */
-	epoch = 1900;
-	if (year < 20)
-		epoch = 2000;
-	else if (year >= 20 && year < 48)
-		/* NT epoch */
-		epoch = 1980;
-	else if (year >= 48 && year < 70)
-		/* Digital UNIX epoch */
-		epoch = 1952;
-
-	printk(KERN_INFO "Using epoch = %d\n", epoch);
-
-	if ((year += epoch) < 1970)
-		year += 100;
-
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
-
-        wall_to_monotonic.tv_sec -= xtime.tv_sec;
-        wall_to_monotonic.tv_nsec = 0;
 
 	if (HZ > (1<<16)) {
 		extern void __you_loose (void);
 		__you_loose();
 	}
 
+	register_rpcc_clocksource(cycle_freq);
+
 	state.last_time = cc1;
 	state.scaled_ticks_per_cycle
 		= ((unsigned long) HZ << FIX_SHIFT) / cycle_freq;
-	state.last_rtc_update = 0;
 	state.partial_tick = 0L;
 
 	/* Startup the timer source. */
@@ -402,44 +426,6 @@ time_init(void)
 }
 
 /*
- * Use the cycle counter to estimate an displacement from the last time
- * tick.  Unfortunately the Alpha designers made only the low 32-bits of
- * the cycle counter active, so we overflow on 8.2 seconds on a 500MHz
- * part.  So we can't do the "find absolute time in terms of cycles" thing
- * that the other ports do.
- */
-u32 arch_gettimeoffset(void)
-{
-#ifdef CONFIG_SMP
-	/* Until and unless we figure out how to get cpu cycle counters
-	   in sync and keep them there, we can't use the rpcc tricks.  */
-	return 0;
-#else
-	unsigned long delta_cycles, delta_usec, partial_tick;
-
-	delta_cycles = rpcc() - state.last_time;
-	partial_tick = state.partial_tick;
-	/*
-	 * usec = cycles * ticks_per_cycle * 2**48 * 1e6 / (2**48 * ticks)
-	 *	= cycles * (s_t_p_c) * 1e6 / (2**48 * ticks)
-	 *	= cycles * (s_t_p_c) * 15625 / (2**42 * ticks)
-	 *
-	 * which, given a 600MHz cycle and a 1024Hz tick, has a
-	 * dynamic range of about 1.7e17, which is less than the
-	 * 1.8e19 in an unsigned long, so we are safe from overflow.
-	 *
-	 * Round, but with .5 up always, since .5 to even is harder
-	 * with no clear gain.
-	 */
-
-	delta_usec = (delta_cycles * state.scaled_ticks_per_cycle 
-		      + partial_tick) * 15625;
-	delta_usec = ((delta_usec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2;
-	return delta_usec * 1000;
-#endif
-}
-
-/*
  * In order to set the CMOS clock precisely, set_rtc_mmss has to be
  * called 500 ms after the second nowtime has started, because when
  * nowtime is written into the registers of the CMOS clock, it will
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 6ee7655..b14f015 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
+#include <linux/ratelimit.h>
 
 #include <asm/gentrap.h>
 #include <asm/uaccess.h>
@@ -771,8 +772,7 @@ asmlinkage void
 do_entUnaUser(void __user * va, unsigned long opcode,
 	      unsigned long reg, struct pt_regs *regs)
 {
-	static int cnt = 0;
-	static unsigned long last_time;
+	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 
 	unsigned long tmp1, tmp2, tmp3, tmp4;
 	unsigned long fake_reg, *reg_addr = &fake_reg;
@@ -783,15 +783,11 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	   with the unaliged access.  */
 
 	if (!test_thread_flag (TIF_UAC_NOPRINT)) {
-		if (cnt >= 5 && time_after(jiffies, last_time + 5 * HZ)) {
-			cnt = 0;
-		}
-		if (++cnt < 5) {
+		if (__ratelimit(&ratelimit)) {
 			printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
 			       current->comm, task_pid_nr(current),
 			       regs->pc - 4, va, opcode, reg);
 		}
-		last_time = jiffies;
 	}
 	if (test_thread_flag (TIF_UAC_SIGBUS))
 		goto give_sigbus;
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 00a31de..fadd5f8 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -142,7 +142,6 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 			goto bad_area;
 	}
 
- survive:
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
@@ -188,16 +187,10 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
  out_of_memory:
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk(KERN_ALERT "VM: killing process %s(%d)\n",
-	       current->comm, task_pid_nr(current));
 	if (!user_mode(regs))
 		goto no_context;
-	do_group_exit(SIGKILL);
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	/* Send a sigbus, regardless of whether we were in kernel
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index a0902c2..86425ab 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h> /* max_low_pfn */
 #include <linux/vmalloc.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c33ca8..98922f7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,7 +12,8 @@ config ARM
 	select HAVE_IDE
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select HAVE_OPROFILE
+	select GENERIC_ATOMIC64 if (!CPU_32v6K)
+	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
@@ -20,6 +21,9 @@ config ARM
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_LZMA
+	select HAVE_PERF_EVENTS
+	select PERF_USE_VMALLOC
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -39,6 +43,11 @@ config GENERIC_GPIO
 
 config GENERIC_TIME
 	bool
+	default y
+
+config ARCH_USES_GETTIMEOFFSET
+	bool
+	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
@@ -52,6 +61,9 @@ config HAVE_TCM
 	bool
 	select GENERIC_ALLOCATOR
 
+config HAVE_PROC_CPU
+	bool
+
 config NO_IOPORT
 	bool
 
@@ -149,6 +161,9 @@ config ARCH_MAY_HAVE_PC_FDC
 config ZONE_DMA
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 
@@ -161,27 +176,10 @@ config ARCH_MTD_XIP
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
-if OPROFILE
-
-config OPROFILE_ARMV6
-	def_bool y
-	depends on CPU_V6 && !SMP
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_MPCORE
-	def_bool y
-	depends on CPU_V6 && SMP
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_ARM11_CORE
+config ARM_L1_CACHE_SHIFT_6
 	bool
-
-config OPROFILE_ARMV7
-	def_bool y
-	depends on CPU_V7 && !SMP
-	bool
-
-endif
+	help
+	  Setting ARM L1 cache line size to 64 Bytes.
 
 config VECTORS_BASE
 	hex
@@ -204,6 +202,10 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+#
+# The "ARM system type" choice list is ordered alphabetically by option
+# text.  Please add new entries in the option alphabetic order.
+#
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
@@ -213,6 +215,7 @@ config ARCH_AAEC2000
 	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -220,21 +223,23 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST525
+	select ICST
+	select GENERIC_CLOCKEVENTS
+	select PLAT_VERSATILE
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
-	select GENERIC_TIME
+	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
+	select GPIO_PL061 if GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -242,35 +247,68 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
-	select GENERIC_TIME
+	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+config ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select ICST
+	select PLAT_VERSATILE
+	help
+	  This enables support for the ARM Ltd Versatile Express boards.
+
 config ARCH_AT91
 	bool "Atmel AT91"
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_CNS3XXX
+	bool "Cavium Networks CNS3XXX family"
+	select CPU_V6
+	select GENERIC_CLOCKEVENTS
+	select ARM_GIC
+	help
+	  Support for Cavium Networks CNS3XXX platform.
+
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select CPU_FA526
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -279,6 +317,7 @@ config ARCH_EBSA110
 	select CPU_SA110
 	select ISA
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -290,11 +329,10 @@ config ARCH_EP93XX
 	select CPU_ARM920T
 	select ARM_AMBA
 	select ARM_VIC
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -302,30 +340,25 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
+	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
 config ARCH_STMP3XXX
 	bool "Freescale STMP3xxx"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select USB_ARCH_HAS_EHCI
 	help
 	  Support for systems based on the Freescale 3xxx CPUs.
@@ -335,7 +368,6 @@ config ARCH_NETX
 	select CPU_ARM926T
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
@@ -343,23 +375,10 @@ config ARCH_H720X
 	bool "Hynix HMS720x-based"
 	select CPU_ARM720T
 	select ISA_DMA_API
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
-config ARCH_NOMADIK
-	bool "STMicroelectronics Nomadik"
-	select ARM_AMBA
-	select ARM_VIC
-	select CPU_ARM926T
-	select HAVE_CLK
-	select COMMON_CLKDEV
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Nomadik platform by ST-Ericsson
-
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -377,7 +396,6 @@ config ARCH_IOP32X
 	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
@@ -389,7 +407,6 @@ config ARCH_IOP33X
 	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
@@ -399,6 +416,7 @@ config ARCH_IXP23XX
 	depends on MMU
 	select CPU_XSC3
  	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -407,6 +425,7 @@ config ARCH_IXP2000
 	depends on MMU
 	select CPU_XSCALE
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -415,7 +434,6 @@ config ARCH_IXP4XX
 	depends on MMU
 	select CPU_XSCALE
 	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select DMABOUNCE if PCI
 	help
@@ -425,6 +443,7 @@ config ARCH_L7200
 	bool "LinkUp-L7200"
 	select CPU_ARM720T
 	select FIQ
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
 	  L7200 Software Development Board which uses an ARM720T processor.
@@ -438,9 +457,7 @@ config ARCH_L7200
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -450,9 +467,7 @@ config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -462,7 +477,6 @@ config ARCH_KIRKWOOD
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -472,9 +486,7 @@ config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -486,9 +498,7 @@ config ARCH_ORION5X
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -497,24 +507,21 @@ config ARCH_ORION5X
 	  Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_MMP
-	bool "Marvell PXA168/910"
+	bool "Marvell PXA168/910/MMP2"
 	depends on MMU
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
 	help
-	  Support for Marvell's PXA168/910 processor line.
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -523,7 +530,6 @@ config ARCH_NS9XXX
 	bool "NetSilicon NS9xxx"
 	select CPU_ARM926T
 	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -536,10 +542,7 @@ config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -550,10 +553,19 @@ config ARCH_W90X900
 	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
+config ARCH_NUC93X
+	bool "Nuvoton NUC93X CPU"
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	help
+	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
+	  low-power and high performance MPEG-4/JPEG multimedia controller chip.
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
-	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -562,11 +574,8 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
@@ -575,14 +584,19 @@ config ARCH_PXA
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
+	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
+	  Support for Qualcomm MSM/QSD based systems.  This runs on the
+	  apps processor of the MSM/QSD and depends on a shared memory
+	  interface to the modem processor which runs the baseband
+	  stack and controls some vital subsystems
+	  (clock and power control, etc).
+
+config ARCH_SHMOBILE
+	bool "Renesas SH-Mobile"
+	help
+	  Support for Renesas's SH-Mobile ARM platforms
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -594,6 +608,7 @@ config ARCH_RPC
 	select ISA_DMA_API
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -606,8 +621,6 @@ config ARCH_SA1100
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
-	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select TICK_ONESHOT
@@ -616,30 +629,80 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derivatives).
 
+	  Note, the S3C2416 and the S3C2450 are so close that they even share
+	  the same SoC ID code. This means that there is no seperate machine
+	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select GENERIC_GPIO
+	select PLAT_SAMSUNG
+	select CPU_V6
+	select ARM_VIC
 	select HAVE_CLK
+	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
+	select USB_ARCH_HAS_OHCI
+	select SAMSUNG_GPIOLIB_4BIT
 	help
 	  Samsung S3C64XX series based systems
 
-config ARCH_S5PC1XX
-	bool "Samsung S5PC1XX"
+config ARCH_S5P6440
+	bool "Samsung S5P6440"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
+	help
+	  Samsung S5P6440 CPU based systems
+
+config ARCH_S5P6442
+	bool "Samsung S5P6442"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
+	help
+	  Samsung S5P6442 CPU based systems
+
+config ARCH_S5PC100
+	bool "Samsung S5PC100"
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_USES_GETTIMEOFFSET
+	help
+	  Samsung S5PC100 series based systems
+
+config ARCH_S5PV210
+	bool "Samsung S5PV210/S5PC110"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_USES_GETTIMEOFFSET
 	help
-	  Samsung S5PC1XX series based systems
+	  Samsung S5PV210/S5PC110 series based systems
 
 config ARCH_SHARK
 	bool "Shark"
@@ -648,6 +711,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select ZONE_DMA
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -657,6 +721,7 @@ config ARCH_LH7A40X
 	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -670,22 +735,37 @@ config ARCH_U300
 	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_GPIO
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7
+	select ARM_AMBA
+	select GENERIC_CLOCKEVENTS
+	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
@@ -696,39 +776,31 @@ config ARCH_DAVINCI
 
 config ARCH_OMAP
 	bool "TI OMAP"
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
+config PLAT_SPEAR
+	bool "ST SPEAr"
 	select ARM_AMBA
+	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLKDEV
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	help
-	  Support for Broadcom's BCMRing platform.
-
-config ARCH_U8500
-	bool "ST-Ericsson U8500 Series"
-	select CPU_V7
-	select ARM_AMBA
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select COMMON_CLKDEV
+	select HAVE_CLK
 	help
-	  Support for ST-Ericsson's Ux500 architecture
+	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
 endchoice
 
+#
+# This is sorted alphabetically by mach-* pathname.  However, plat-*
+# Kconfigs may be included either alphabetically (according to the
+# plat- suffix) or along side the corresponding mach-* source.
+#
 source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -737,6 +809,8 @@ source "arch/arm/mach-bcmring/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-cns3xxx/Kconfig"
+
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-dove/Kconfig"
@@ -784,6 +858,8 @@ source "arch/arm/plat-nomadik/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
 
+source "arch/arm/mach-nuc93x/Kconfig"
+
 source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
@@ -803,29 +879,34 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
-source "arch/arm/plat-s5pc1xx/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
+
+source "arch/arm/plat-spear/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6440/Kconfig"
+
+source "arch/arm/mach-s5p6442/Kconfig"
 
-if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
-endif
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
 
@@ -833,6 +914,8 @@ source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
+source "arch/arm/mach-vexpress/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -842,7 +925,6 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 
 config PLAT_ORION
 	bool
@@ -850,6 +932,12 @@ config PLAT_ORION
 config PLAT_PXA
 	bool
 
+config PLAT_VERSATILE
+	bool
+
+config ARM_TIMER_SP804
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -866,6 +954,12 @@ config XSCALE_PMU
 	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
 	default y
 
+config CPU_HAS_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
+	default y
+	bool
+
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -920,6 +1014,19 @@ config ARM_ERRATA_460075
 	  ACTLR register. Note that setting specific bits in the ACTLR register
 	  may not be available in non-secure mode.
 
+config PL310_ERRATA_588369
+	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+	depends on CACHE_L2X0 && ARCH_OMAP4
+	help
+	   The PL310 L2 cache controller implements three types of Clean &
+	   Invalidate maintenance operations: by Physical Address
+	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+	   They are architecturally defined to behave as the execution of a
+	   clean operation followed immediately by an invalidate operation,
+	   both performing to the same memory location. This functionality
+	   is not correctly implemented in PL310 as clean lines are not
+	   invalidated as a result of these operations. Note that this errata
+	   uses Texas Instrument's secure monitor api.
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -960,6 +1067,10 @@ config PCI
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.
 
+config PCI_DOMAINS
+	bool
+	depends on PCI
+
 config PCI_SYSCALL
 	def_bool PCI
 
@@ -988,10 +1099,11 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1074,7 +1186,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
@@ -1170,6 +1282,14 @@ config HIGHPTE
 	depends on HIGHMEM
 	depends on !OUTER_CACHE
 
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS && CPU_HAS_PMU
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
 source "mm/Kconfig"
 
 config LEDS
@@ -1229,6 +1349,7 @@ config ALIGNMENT_TRAP
 	bool
 	depends on CPU_CP15_MMU
 	default y if !ARCH_EBSA110
+	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARM processors cannot fetch/store information which is not
 	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
@@ -1301,6 +1422,17 @@ config CMDLINE
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	depends on CMDLINE != ""
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+	  If unsure, say N.
+
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ZBOOT_ROM
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326..91344af 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2
 	  cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-	depends on PLAT_S3C
+	depends on PLAT_SAMSUNG
 	int "S3C UART to use for low-level debug"
 	default "0"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9e75825..64ba313 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@ CFLAGS_ABI	+=-funwind-tables
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@@ -110,6 +110,8 @@ CHECKFLAGS	+= -D__arm__
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
+# We don't want the htc bootloader to corrupt kernel during resume
+textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
@@ -121,6 +123,7 @@ machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_CNS3XXX)		:= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
@@ -146,6 +149,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
@@ -159,32 +163,44 @@ machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
-machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
+machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
+machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
+machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
+machine-$(CONFIG_ARCH_NUC93X)		:= nuc93x
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
+plat-$(CONFIG_PLAT_SPEAR)	:= spear
+plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index 8e3d81c..fc54394 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -19,7 +19,7 @@ SECTIONS
    initrd_size = initrd_end - initrd_start;
    _etext = .;
   }
-  
+
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
   .stab.excl 0 : { *(.stab.excl) }
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index df7bc70..8b0de41 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -49,7 +49,7 @@ _start:		add	lr, pc, #-0x8		@ lr = current load addr
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
  * If there is already an INITRD tag, then we ignore it; the last INITRD
- * tag takes precidence.
+ * tag takes precedence.
  */
 taglist:	ldr	r10, [r9, #0]		@ tag length
 		teq	r10, #0			@ last tag (zero length)?
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2d4d88b..864a002 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -5,7 +5,7 @@
 #
 
 HEAD	= head.o
-OBJS	= misc.o
+OBJS	= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
 
 #
@@ -65,11 +65,15 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
 suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
 
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
 		 font.o font.c head.o misc.o $(OBJS)
 
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
@@ -106,10 +110,6 @@ lib1funcs = $(obj)/lib1funcs.o
 $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
 	$(call cmd,shipped)
 
-# Don't allow any static data in misc.o, which
-# would otherwise mess up our GOT table
-CFLAGS_misc.o := -Dstatic=
-
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
 	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
new file mode 100644
index 0000000..4c72a97
--- /dev/null
+++ b/arch/arm/boot/compressed/decompress.c
@@ -0,0 +1,50 @@
+#define _LINUX_STRING_H_
+
+#include <linux/compiler.h>	/* for inline */
+#include <linux/types.h>	/* for size_t */
+#include <linux/stddef.h>	/* for NULL */
+#include <linux/linkage.h>
+#include <asm/string.h>
+
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+extern void error(char *);
+
+#define STATIC static
+#define STATIC_RW_DATA	/* non-static please */
+
+#define ARCH_HAS_DECOMP_WDOG
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Trace(x) fprintf x
+#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+{
+	decompress(input, len, NULL, NULL, output, NULL, error);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4fddc50..c5191b1 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,13 +22,13 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #ifdef CONFIG_CPU_V6
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 wait:		mrc	p14, 0, pc, c0, c1, 0
@@ -36,13 +36,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -58,7 +58,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -67,13 +67,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 #endif
 		.endm
 #elif defined(CONFIG_ARCH_S3C2410)
-		.macro loadsp, rb
+		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
 		.endm
 #else
-		.macro	loadsp,	rb
-		addruart \rb
+		.macro	loadsp,	rb, tmp
+		addruart \rb, \tmp
 		.endm
 #endif
 #endif
@@ -170,9 +170,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
- THUMB(		ldr	sp, [r0, #28]				)
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
+ THUMB(		ldr	sp, [r0, #32]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -182,12 +182,13 @@ not_angel:
 		/*
 		 * We're running at a different address.  We need to fix
 		 * up various pointers:
-		 *   r5 - zImage base address
-		 *   r6 - GOT start
+		 *   r5 - zImage base address (_start)
+		 *   r6 - size of decompressed image
+		 *   r11 - GOT start
 		 *   ip - GOT end
 		 */
 		add	r5, r5, r0
-		add	r6, r6, r0
+		add	r11, r11, r0
 		add	ip, ip, r0
 
 #ifndef CONFIG_ZBOOT_ROM
@@ -205,10 +206,10 @@ not_angel:
 		/*
 		 * Relocate all entries in the GOT table.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		add	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #else
 
@@ -216,12 +217,12 @@ not_angel:
 		 * Relocate entries in the GOT table.  We only relocate
 		 * the entries that are outside the (relocated) BSS region.
 		 */
-1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		cmp	r1, r2			@ entry < bss_start ||
 		cmphs	r3, r1			@ _end < entry
 		addlo	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r6], #4		@ C references.
-		cmp	r6, ip
+		str	r1, [r11], #4		@ C references.
+		cmp	r11, ip
 		blo	1b
 #endif
 
@@ -247,6 +248,7 @@ not_relocated:	mov	r0, #0
  * Check to see if we will overwrite ourselves.
  *   r4 = final kernel address
  *   r5 = start of this image
+ *   r6 = size of decompressed image
  *   r2 = end of malloc space (and therefore this image)
  * We basically want:
  *   r4 >= r2 -> OK
@@ -254,8 +256,7 @@ not_relocated:	mov	r0, #0
  */
 		cmp	r4, r2
 		bhs	wont_overwrite
-		sub	r3, sp, r5		@ > compressed kernel size
-		add	r0, r4, r3, lsl #2	@ allow for 4x expansion
+		add	r0, r4, r6
 		cmp	r0, r5
 		bls	wont_overwrite
 
@@ -271,7 +272,6 @@ not_relocated:	mov	r0, #0
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -312,7 +312,8 @@ LC0:		.word	LC0			@ r1
 		.word	_end			@ r3
 		.word	zreladdr		@ r4
 		.word	_start			@ r5
-		.word	_got_start		@ r6
+		.word	_image_size		@ r6
+		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	user_stack+4096		@ sp
 LC1:		.word	reloc_end - reloc_start
@@ -336,7 +337,6 @@ params:		ldr	r0, =params_phys
  *
  * On entry,
  *  r4 = kernel execution address
- *  r6 = processor ID
  *  r7 = architecture number
  *  r8 = atags pointer
  *  r9 = run-time address of "start"  (???)
@@ -542,7 +542,6 @@ __common_mmu_cache_on:
  * r1-r3  = unused
  * r4     = kernel execution address
  * r5     = decompressed kernel start
- * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
  * r9-r12,r14 = corrupted
@@ -581,19 +580,19 @@ call_kernel:	bl	cache_clean_flush
  *  r1  = corrupted
  *  r2  = corrupted
  *  r3  = block offset
- *  r6  = corrupted
+ *  r9  = corrupted
  *  r12 = corrupted
  */
 
 call_cache_fn:	adr	r12, proc_types
 #ifdef CONFIG_CPU_CP15
-		mrc	p15, 0, r6, c0, c0	@ get processor ID
+		mrc	p15, 0, r9, c0, c0	@ get processor ID
 #else
-		ldr	r6, =CONFIG_PROCESSOR_ID
+		ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
 1:		ldr	r1, [r12, #0]		@ get value
 		ldr	r2, [r12, #4]		@ get mask
-		eor	r1, r1, r6		@ (real ^ match)
+		eor	r1, r1, r9		@ (real ^ match)
 		tst	r1, r2			@       & mask
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
@@ -686,8 +685,8 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
 
-		.word	0x56056930
-		.word	0xff0ffff0		@ PXA935
+		.word	0x56056900
+		.word	0xffffff00		@ PXA9xx
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
@@ -698,12 +697,6 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv5tej_mmu_cache_flush
 
-		.word	0x56056930
-		.word	0xff0ffff0		@ PXA935
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		W(b)	__armv4_mmu_cache_on
@@ -743,7 +736,7 @@ proc_types:
 		.word	0x000f0000
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
@@ -778,8 +771,7 @@ proc_types:
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On entry,  r6 = processor ID
- * On exit,   r0, r1, r2, r3, r12 corrupted
+ * On exit, r0, r1, r2, r3, r9, r12 corrupted
  * This routine must preserve: r4, r6, r7
  */
 		.align	5
@@ -852,10 +844,8 @@ __armv3_mmu_cache_off:
 /*
  * Clean and flush the cache to maintain consistency.
  *
- * On entry,
- *  r6 = processor ID
  * On exit,
- *  r1, r2, r3, r11, r12 corrupted
+ *  r1, r2, r3, r9, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -967,7 +957,7 @@ __armv4_mmu_cache_flush:
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
-		teq	r3, r6			@ cache ID register present?
+		teq	r3, r9			@ cache ID register present?
 		beq	no_cache_id
 		mov	r1, r3, lsr #18
 		and	r1, r1, #7
@@ -1025,7 +1015,7 @@ phex:		adr	r3, phexbuf
 		strb	r2, [r3, r1]
 		b	1b
 
-puts:		loadsp	r3
+puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1042,7 +1032,7 @@ puts:		loadsp	r3
 putc:
 		mov	r2, r0
 		mov	r0, #0
-		loadsp	r3
+		loadsp	r3, r1
 		b	2b
 
 memdump:	mov	r12, r0
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 56a0d11..d2b2ef4 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,8 +23,8 @@ unsigned int __machine_arch_type;
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
-#include <asm/string.h>
 #include <linux/linkage.h>
+#include <asm/string.h>
 
 #include <asm/unaligned.h>
 
@@ -33,6 +33,7 @@ unsigned int __machine_arch_type;
 #else
 
 static void putstr(const char *ptr);
+extern void error(char *x);
 
 #include <mach/uncompress.h>
 
@@ -117,57 +118,7 @@ static void putstr(const char *ptr)
 
 #endif
 
-#define __ptr_t void *
-
-#define memzero(s,n) __memzero(s,n)
-
-/*
- * Optimised C version of memzero for the ARM.
- */
-void __memzero (__ptr_t s, size_t n)
-{
-	union { void *vp; unsigned long *ulp; unsigned char *ucp; } u;
-	int i;
-
-	u.vp = s;
-
-	for (i = n >> 5; i > 0; i--) {
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-	}
-
-	if (n & 1 << 4) {
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-	}
-
-	if (n & 1 << 3) {
-		*u.ulp++ = 0;
-		*u.ulp++ = 0;
-	}
-
-	if (n & 1 << 2)
-		*u.ulp++ = 0;
-
-	if (n & 1 << 1) {
-		*u.ucp++ = 0;
-		*u.ucp++ = 0;
-	}
-
-	if (n & 1)
-		*u.ucp++ = 0;
-}
-
-static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;
 	unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
@@ -204,59 +155,20 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
 /*
  * gzip delarations
  */
-#define STATIC static
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static void error(char *m);
-
 extern char input_data[];
 extern char input_data_end[];
 
-static unsigned char *output_data;
-static unsigned long output_ptr;
-
-static void error(char *m);
+unsigned char *output_data;
+unsigned long output_ptr;
 
-static void putstr(const char *);
-
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef STANDALONE_DEBUG
-#define NO_INFLATE_MALLOC
-#endif
-
-#define ARCH_HAS_DECOMP_WDOG
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
 
 #ifndef arch_error
 #define arch_error(x)
 #endif
 
-static void error(char *x)
+void error(char *x)
 {
 	arch_error(x);
 
@@ -272,6 +184,8 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
+extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
 #ifndef STANDALONE_DEBUG
 
 unsigned long
@@ -292,8 +206,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	output_ptr = get_unaligned_le32(tmp);
 
 	putstr("Uncompressing Linux...");
-	decompress(input_data, input_data_end - input_data,
-			NULL, NULL, output_data, NULL, error);
+	do_decompress(input_data, input_data_end - input_data,
+			output_data, error);
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S
new file mode 100644
index 0000000..d7e69cf
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.lzma.S
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.lzma"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index a5924b9..d081689 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -14,6 +14,13 @@ SECTIONS
   /DISCARD/ : {
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    /*
+     * Discard any r/w data - this produces a link error if we have any,
+     * which is required for PIC decompression.  Local data generates
+     * GOTOFF relocations, which prevents it being relocated independently
+     * of the text/got segments.
+     */
+    *(.data)
   }
 
   . = TEXT_START;
@@ -36,11 +43,13 @@ SECTIONS
 
   _etext = .;
 
+  /* Assume size of decompressed image is 4x the compressed image */
+  _image_size = (_etext - _text) * 4;
+
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
   .got.plt		: { *(.got.plt) }
-  .data			: { *(.data) }
   _edata = .;
 
   . = BSS_START;
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4efbb9d..0a34c81 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -12,10 +12,10 @@ config ARM_VIC_NR
 	  The maximum number of VICs available in the system, for
 	  power management.
 
-config ICST525
+config ICST
 	bool
 
-config ICST307
+config PL330
 	bool
 
 config SA1111
@@ -40,3 +40,4 @@ config SHARP_SCOOP
 
 config COMMON_CLKDEV
 	bool
+	select HAVE_CLK
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 76be7ff..e6e8664 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -4,8 +4,8 @@
 
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
-obj-$(CONFIG_ICST525)		+= icst525.o
-obj-$(CONFIG_ICST307)		+= icst307.o
+obj-$(CONFIG_ICST)		+= icst.o
+obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index aae5bc0..e2b2bb6 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -18,6 +18,7 @@
 #include <linux/string.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
@@ -32,7 +33,7 @@ static DEFINE_MUTEX(clocks_mutex);
  *  If an entry has a device ID, it must match
  *  If an entry has a connection ID, it must match
  * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
  */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
@@ -52,12 +53,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 				continue;
 			match += 1;
 		}
-		if (match == 0)
-			continue;
 
 		if (match > best) {
 			clk = p->clk;
-			best = match;
+			if (match != 3)
+				best = match;
+			else
+				break;
 		}
 	}
 	return clk;
@@ -99,6 +101,16 @@ void clkdev_add(struct clk_lookup *cl)
 }
 EXPORT_SYMBOL(clkdev_add);
 
+void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
+{
+	mutex_lock(&clocks_mutex);
+	while (num--) {
+		list_add_tail(&cl->node, &clocks);
+		cl++;
+	}
+	mutex_unlock(&clocks_mutex);
+}
+
 #define MAX_DEV_ID	20
 #define MAX_CON_ID	16
 
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cc32c1e..cc0a932 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -277,7 +277,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		 * We don't need to sync the DMA buffer since
 		 * it was allocated via the coherent allocators.
 		 */
-		dma_cache_maint(ptr, size, dir);
+		__dma_single_cpu_to_dev(ptr, size, dir);
 	}
 
 	return dma_addr;
@@ -315,6 +315,8 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
 			__cpuc_flush_dcache_area(ptr, size);
 		}
 		free_safe_buffer(dev->archdata.dmabounce, buf);
+	} else {
+		__dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
 	}
 }
 
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
new file mode 100644
index 0000000..9a7f09c
--- /dev/null
+++ b/arch/arm/common/icst.c
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/common/icst307.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This is an almost identical implementation to the ICST525 clock generator.
+ *  The s2div and idx2s files are different
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/icst.h>
+
+/*
+ * Divisors for each OD setting.
+ */
+const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
+const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
+EXPORT_SYMBOL(icst307_s2div);
+EXPORT_SYMBOL(icst525_s2div);
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
+{
+	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+}
+
+EXPORT_SYMBOL(icst_hz);
+
+/*
+ * Ascending divisor S values.
+ */
+const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
+const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
+EXPORT_SYMBOL(icst307_idx2s);
+EXPORT_SYMBOL(icst525_idx2s);
+
+struct icst_vco
+icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
+{
+	struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
+	unsigned long f;
+	unsigned int i = 0, rd, best = (unsigned int)-1;
+
+	/*
+	 * First, find the PLL output divisor such
+	 * that the PLL output is within spec.
+	 */
+	do {
+		f = freq * p->s2div[p->idx2s[i]];
+
+		if (f > p->vco_min && f <= p->vco_max)
+			break;
+	} while (i < 8);
+
+	if (i >= 8)
+		return vco;
+
+	vco.s = p->idx2s[i];
+
+	/*
+	 * Now find the closest divisor combination
+	 * which gives a PLL output of 'f'.
+	 */
+	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
+		unsigned long fref_div, f_pll;
+		unsigned int vd;
+		int f_diff;
+
+		fref_div = (2 * p->ref) / rd;
+
+		vd = (f + fref_div / 2) / fref_div;
+		if (vd < p->vd_min || vd > p->vd_max)
+			continue;
+
+		f_pll = fref_div * vd;
+		f_diff = f_pll - f;
+		if (f_diff < 0)
+			f_diff = -f_diff;
+
+		if ((unsigned)f_diff < best) {
+			vco.v = vd - 8;
+			vco.r = rd - 2;
+			if (f_diff == 0)
+				break;
+			best = f_diff;
+		}
+	}
+
+	return vco;
+}
+
+EXPORT_SYMBOL(icst_hz_to_vco);
diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c
deleted file mode 100644
index 6d094c1..0000000
--- a/arch/arm/common/icst307.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- *  linux/arch/arm/common/icst307.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This is an almost identical implementation to the ICST525 clock generator.
- *  The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst307.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst307_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-
-struct icst307_vco
-icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f > 6000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_khz_to_vco);
-
-struct icst307_vco
-icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f >= ps && f < 1000000000UL / 6000 + 1)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_ps_to_vco);
diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c
deleted file mode 100644
index 3d377c5..0000000
--- a/arch/arm/common/icst525.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  linux/arch/arm/common/icst525.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst525.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst525_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-
-struct icst525_vco
-icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f > 10000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_khz_to_vco);
-
-struct icst525_vco
-icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f >= ps && f < 100000)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_ps_to_vco);
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 2793447..7974baa 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -21,7 +21,6 @@
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
@@ -272,33 +271,6 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case
- * we will fail miseralby and die since we can't handle that case.
- */
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index bd36c77..9dff07c 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -32,6 +32,12 @@
 
 #include <asm/hardware/locomo.h>
 
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY		(0)
+#define IRQ_LOCOMO_GPIO		(1)
+#define IRQ_LOCOMO_LT		(2)
+#define IRQ_LOCOMO_SPI		(3)
+
 /* M62332 output channel selection */
 #define M62332_EVR_CH	1	/* M62332 volume channel number  */
 				/*   0 : CH.1 , 1 : CH. 2        */
@@ -58,6 +64,7 @@ struct locomo {
 	struct device *dev;
 	unsigned long phys;
 	unsigned int irq;
+	int irq_base;
 	spinlock_t lock;
 	void __iomem *base;
 #ifdef CONFIG_PM
@@ -81,9 +88,7 @@ struct locomo_dev_info {
 static struct locomo_dev_info locomo_devices[] = {
 	{
 		.devid 		= LOCOMO_DEVID_KEYBOARD,
-		.irq = {
-			IRQ_LOCOMO_KEY,
-		},
+		.irq		= { IRQ_LOCOMO_KEY },
 		.name		= "locomo-keyboard",
 		.offset		= LOCOMO_KEYBOARD,
 		.length		= 16,
@@ -133,53 +138,20 @@ static struct locomo_dev_info locomo_devices[] = {
 	},
 };
 
-
-/** LoCoMo interrupt handling stuff.
- * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
- * that is, there is only one real hardware interrupt
- * we determine which interrupt it is by reading some IO memory.
- * We have two levels of expansion, first in the handler for the
- * hardware interrupt we generate an interrupt
- * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
- *
- * hardware irq reads LOCOMO_ICR & 0x0f00
- *   IRQ_LOCOMO_KEY_BASE
- *   IRQ_LOCOMO_GPIO_BASE
- *   IRQ_LOCOMO_LT_BASE
- *   IRQ_LOCOMO_SPI_BASE
- * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
- *   IRQ_LOCOMO_KEY
- * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
- *   IRQ_LOCOMO_GPIO[0-15]
- * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
- *   IRQ_LOCOMO_LT
- * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
- *   IRQ_LOCOMO_SPI_RFR
- *   IRQ_LOCOMO_SPI_RFW
- *   IRQ_LOCOMO_SPI_OVRN
- *   IRQ_LOCOMO_SPI_TEND
- */
-
-#define LOCOMO_IRQ_START	(IRQ_LOCOMO_KEY_BASE)
-#define LOCOMO_IRQ_KEY_START	(IRQ_LOCOMO_KEY)
-#define	LOCOMO_IRQ_GPIO_START	(IRQ_LOCOMO_GPIO0)
-#define	LOCOMO_IRQ_LT_START	(IRQ_LOCOMO_LT)
-#define	LOCOMO_IRQ_SPI_START	(IRQ_LOCOMO_SPI_RFR)
-
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
+	struct locomo *lchip = get_irq_chip_data(irq);
 	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
 	desc->chip->ack(irq);
 
 	/* check why this interrupt was generated */
-	req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
+	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
 	if (req) {
 		/* generate the next interrupt(s) */
-		irq = LOCOMO_IRQ_START;
+		irq = lchip->irq_base;
 		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0100 << i)) {
 				generic_handle_irq(irq);
@@ -195,20 +167,20 @@ static void locomo_ack_irq(unsigned int irq)
 
 static void locomo_mask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r &= ~(0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static void locomo_unmask_irq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct locomo *lchip = get_irq_chip_data(irq);
 	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_ICR);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_START));
-	locomo_writel(r, mapbase + LOCOMO_ICR);
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r |= (0x0010 << (irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static struct irq_chip locomo_chip = {
@@ -218,297 +190,22 @@ static struct irq_chip locomo_chip = {
 	.unmask	= locomo_unmask_irq,
 };
 
-static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_KEY_START);
-	}
-}
-
-static void locomo_key_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-	locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static struct irq_chip locomo_key_chip = {
-	.name	= "LOCOMO-key",
-	.ack	= locomo_key_ack_irq,
-	.mask	= locomo_key_mask_irq,
-	.unmask	= locomo_key_unmask_irq,
-};
-
-static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
-		locomo_readl(mapbase + LOCOMO_GPD) &
-		0xffff;
-
-	if (req) {
-		irq = LOCOMO_IRQ_GPIO_START;
-		for (i = 0; i <= 15; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_gpio_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-
-	r = locomo_readl(mapbase + LOCOMO_GIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIS);
-
-	r = locomo_readl(mapbase + LOCOMO_GWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GWE);
-}
-
-static void locomo_gpio_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static void locomo_gpio_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_GIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-	locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-
-static int locomo_gpio_type(unsigned int irq, unsigned int type)
-{
-	unsigned int mask;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
-	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
-
-	return 0;
-}
-
-static struct irq_chip locomo_gpio_chip = {
-	.name	  = "LOCOMO-gpio",
-	.ack	  = locomo_gpio_ack_irq,
-	.mask	  = locomo_gpio_mask_irq,
-	.unmask	  = locomo_gpio_unmask_irq,
-	.set_type = locomo_gpio_type,
-};
-
-static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-		generic_handle_irq(LOCOMO_IRQ_LT_START);
-	}
-}
-
-static void locomo_lt_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_LTINT);
-	r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
-	locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static struct irq_chip locomo_lt_chip = {
-	.name	= "LOCOMO-lt",
-	.ack	= locomo_lt_ack_irq,
-	.mask	= locomo_lt_mask_irq,
-	.unmask	= locomo_lt_unmask_irq,
-};
-
-static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int req, i;
-	void __iomem *mapbase = get_irq_chip_data(irq);
-
-	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
-	if (req) {
-		irq = LOCOMO_IRQ_SPI_START;
-
-		for (i = 0; i <= 3; i++, irq++) {
-			if (req & (0x0001 << i)) {
-				generic_handle_irq(irq);
-			}
-		}
-	}
-}
-
-static void locomo_spi_ack_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-}
-
-static void locomo_spi_mask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static void locomo_spi_unmask_irq(unsigned int irq)
-{
-	void __iomem *mapbase = get_irq_chip_data(irq);
-	unsigned int r;
-	r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-	r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-	locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static struct irq_chip locomo_spi_chip = {
-	.name	= "LOCOMO-spi",
-	.ack	= locomo_spi_ack_irq,
-	.mask	= locomo_spi_mask_irq,
-	.unmask	= locomo_spi_unmask_irq,
-};
-
 static void locomo_setup_irq(struct locomo *lchip)
 {
-	int irq;
-	void __iomem *irqbase = lchip->base;
+	int irq = lchip->irq_base;
 
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	set_irq_chip_data(lchip->irq, irqbase);
+	set_irq_chip_data(lchip->irq, lchip);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
-	/* Install handlers for IRQ_LOCOMO_*_BASE */
-	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-
-	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-
-	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-
-	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
-	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
-	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-
-	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
-	set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
-		set_irq_chip(irq, &locomo_gpio_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
-	set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
-	set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
-	set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
-	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
-
-	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
-		set_irq_chip(irq, &locomo_spi_chip);
-		set_irq_chip_data(irq, irqbase);
-		set_irq_handler(irq, handle_edge_irq);
+	/* Install handlers for IRQ_LOCOMO_* */
+	for ( ; irq <= lchip->irq_base + 3; irq++) {
+		set_irq_chip(irq, &locomo_chip);
+		set_irq_chip_data(irq, lchip);
+		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 }
@@ -555,7 +252,8 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->mapbase = 0;
 	dev->length = info->length;
 
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
+	dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+			NO_IRQ : lchip->irq_base + info->irq[0];
 
 	ret = device_register(&dev->dev);
 	if (ret) {
@@ -592,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
 	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
-	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+	locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
@@ -672,6 +370,7 @@ static int locomo_resume(struct platform_device *dev)
 static int
 __locomo_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct locomo_platform_data *pdata = me->platform_data;
 	struct locomo *lchip;
 	unsigned long r;
 	int i, ret = -ENODEV;
@@ -687,6 +386,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	lchip->phys = mem->start;
 	lchip->irq = irq;
+	lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
 
 	/*
 	 * Map the whole region.  This also maps the
@@ -718,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */
-	locomo_writel(0, lchip->base + LOCOMO_SPIIE);
+	locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
 
 	locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
 	r = locomo_readl(lchip->base + LOCOMO_ASD);
@@ -753,7 +453,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	 * The interrupt controller must be initialised before any
 	 * other device to ensure that the interrupts are available.
 	 */
-	if (lchip->irq != NO_IRQ)
+	if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
 		locomo_setup_irq(lchip);
 
 	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
@@ -1007,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
-		return;
+		goto out;
 	}
 
 	/* Send Sub address (LSB is channel select) */
@@ -1035,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
-		return;
+		goto out;
 	}
 
 	/* Send DAC data */
@@ -1060,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
-		return;
 	}
 
+out:
 	/* stop */
 	r = locomo_readl(mapbase + LOCOMO_DAC);
 	r &=  ~(LOCOMO_DAC_SCLOEB);
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
new file mode 100644
index 0000000..5ebbab6
--- /dev/null
+++ b/arch/arm/common/pl330.c
@@ -0,0 +1,1966 @@
+/* linux/arch/arm/common/pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware/pl330.h>
+
+/* Register and Bit field Definitions */
+#define DS		0x0
+#define DS_ST_STOP	0x0
+#define DS_ST_EXEC	0x1
+#define DS_ST_CMISS	0x2
+#define DS_ST_UPDTPC	0x3
+#define DS_ST_WFE	0x4
+#define DS_ST_ATBRR	0x5
+#define DS_ST_QBUSY	0x6
+#define DS_ST_WFP	0x7
+#define DS_ST_KILL	0x8
+#define DS_ST_CMPLT	0x9
+#define DS_ST_FLTCMP	0xe
+#define DS_ST_FAULT	0xf
+
+#define DPC		0x4
+#define INTEN		0x20
+#define ES		0x24
+#define INTSTATUS	0x28
+#define INTCLR		0x2c
+#define FSM		0x30
+#define FSC		0x34
+#define FTM		0x38
+
+#define _FTC		0x40
+#define FTC(n)		(_FTC + (n)*0x4)
+
+#define _CS		0x100
+#define CS(n)		(_CS + (n)*0x8)
+#define CS_CNS		(1 << 21)
+
+#define _CPC		0x104
+#define CPC(n)		(_CPC + (n)*0x8)
+
+#define _SA		0x400
+#define SA(n)		(_SA + (n)*0x20)
+
+#define _DA		0x404
+#define DA(n)		(_DA + (n)*0x20)
+
+#define _CC		0x408
+#define CC(n)		(_CC + (n)*0x20)
+
+#define CC_SRCINC	(1 << 0)
+#define CC_DSTINC	(1 << 14)
+#define CC_SRCPRI	(1 << 8)
+#define CC_DSTPRI	(1 << 22)
+#define CC_SRCNS	(1 << 9)
+#define CC_DSTNS	(1 << 23)
+#define CC_SRCIA	(1 << 10)
+#define CC_DSTIA	(1 << 24)
+#define CC_SRCBRSTLEN_SHFT	4
+#define CC_DSTBRSTLEN_SHFT	18
+#define CC_SRCBRSTSIZE_SHFT	1
+#define CC_DSTBRSTSIZE_SHFT	15
+#define CC_SRCCCTRL_SHFT	11
+#define CC_SRCCCTRL_MASK	0x7
+#define CC_DSTCCTRL_SHFT	25
+#define CC_DRCCCTRL_MASK	0x7
+#define CC_SWAP_SHFT	28
+
+#define _LC0		0x40c
+#define LC0(n)		(_LC0 + (n)*0x20)
+
+#define _LC1		0x410
+#define LC1(n)		(_LC1 + (n)*0x20)
+
+#define DBGSTATUS	0xd00
+#define DBG_BUSY	(1 << 0)
+
+#define DBGCMD		0xd04
+#define DBGINST0	0xd08
+#define DBGINST1	0xd0c
+
+#define CR0		0xe00
+#define CR1		0xe04
+#define CR2		0xe08
+#define CR3		0xe0c
+#define CR4		0xe10
+#define CRD		0xe14
+
+#define PERIPH_ID	0xfe0
+#define PCELL_ID	0xff0
+
+#define CR0_PERIPH_REQ_SET	(1 << 0)
+#define CR0_BOOT_EN_SET		(1 << 1)
+#define CR0_BOOT_MAN_NS		(1 << 2)
+#define CR0_NUM_CHANS_SHIFT	4
+#define CR0_NUM_CHANS_MASK	0x7
+#define CR0_NUM_PERIPH_SHIFT	12
+#define CR0_NUM_PERIPH_MASK	0x1f
+#define CR0_NUM_EVENTS_SHIFT	17
+#define CR0_NUM_EVENTS_MASK	0x1f
+
+#define CR1_ICACHE_LEN_SHIFT	0
+#define CR1_ICACHE_LEN_MASK	0x7
+#define CR1_NUM_ICACHELINES_SHIFT	4
+#define CR1_NUM_ICACHELINES_MASK	0xf
+
+#define CRD_DATA_WIDTH_SHIFT	0
+#define CRD_DATA_WIDTH_MASK	0x7
+#define CRD_WR_CAP_SHIFT	4
+#define CRD_WR_CAP_MASK		0x7
+#define CRD_WR_Q_DEP_SHIFT	8
+#define CRD_WR_Q_DEP_MASK	0xf
+#define CRD_RD_CAP_SHIFT	12
+#define CRD_RD_CAP_MASK		0x7
+#define CRD_RD_Q_DEP_SHIFT	16
+#define CRD_RD_Q_DEP_MASK	0xf
+#define CRD_DATA_BUFF_SHIFT	20
+#define CRD_DATA_BUFF_MASK	0x3ff
+
+#define	PART		0x330
+#define DESIGNER	0x41
+#define REVISION	0x0
+#define INTEG_CFG	0x0
+#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12) \
+			  | (REVISION << 20) | (INTEG_CFG << 24))
+
+#define PCELL_ID_VAL	0xb105f00d
+
+#define PL330_STATE_STOPPED		(1 << 0)
+#define PL330_STATE_EXECUTING		(1 << 1)
+#define PL330_STATE_WFE			(1 << 2)
+#define PL330_STATE_FAULTING		(1 << 3)
+#define PL330_STATE_COMPLETING		(1 << 4)
+#define PL330_STATE_WFP			(1 << 5)
+#define PL330_STATE_KILLING		(1 << 6)
+#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
+#define PL330_STATE_CACHEMISS		(1 << 8)
+#define PL330_STATE_UPDTPC		(1 << 9)
+#define PL330_STATE_ATBARRIER		(1 << 10)
+#define PL330_STATE_QUEUEBUSY		(1 << 11)
+#define PL330_STATE_INVALID		(1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+				| PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH	0x54
+#define CMD_DMAEND	0x00
+#define CMD_DMAFLUSHP	0x35
+#define CMD_DMAGO	0xa0
+#define CMD_DMALD	0x04
+#define CMD_DMALDP	0x25
+#define CMD_DMALP	0x20
+#define CMD_DMALPEND	0x28
+#define CMD_DMAKILL	0x01
+#define CMD_DMAMOV	0xbc
+#define CMD_DMANOP	0x18
+#define CMD_DMARMB	0x12
+#define CMD_DMASEV	0x34
+#define CMD_DMAST	0x08
+#define CMD_DMASTP	0x29
+#define CMD_DMASTZ	0x0c
+#define CMD_DMAWFE	0x36
+#define CMD_DMAWFP	0x30
+#define CMD_DMAWMB	0x13
+
+#define SZ_DMAADDH	3
+#define SZ_DMAEND	1
+#define SZ_DMAFLUSHP	2
+#define SZ_DMALD	1
+#define SZ_DMALDP	2
+#define SZ_DMALP	2
+#define SZ_DMALPEND	2
+#define SZ_DMAKILL	1
+#define SZ_DMAMOV	6
+#define SZ_DMANOP	1
+#define SZ_DMARMB	1
+#define SZ_DMASEV	2
+#define SZ_DMAST	1
+#define SZ_DMASTP	2
+#define SZ_DMASTZ	1
+#define SZ_DMAWFE	2
+#define SZ_DMAWFP	2
+#define SZ_DMAWMB	1
+#define SZ_DMAGO	6
+
+#define BRST_LEN(ccr)	((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr)	(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ	256
+
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+#define MARK_FREE(req)	do { \
+				_emit_END(0, (req)->mc_cpu); \
+				(req)->mc_len = 0; \
+			} while (0)
+
+/* If the _pl330_req is available to the client */
+#define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...)	do { \
+						printk("%x:", cmd_line); \
+						printk(x); \
+						cmd_line += off; \
+					} while (0)
+#define PL330_DBGMC_START(addr)		(cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
+#define PL330_DBGMC_START(addr)		do {} while (0)
+#endif
+
+struct _xfer_spec {
+	u32 ccr;
+	struct pl330_req *r;
+	struct pl330_xfer *x;
+};
+
+enum dmamov_dst {
+	SAR = 0,
+	CCR,
+	DAR,
+};
+
+enum pl330_dst {
+	SRC = 0,
+	DST,
+};
+
+enum pl330_cond {
+	SINGLE,
+	BURST,
+	ALWAYS,
+};
+
+struct _pl330_req {
+	u32 mc_bus;
+	void *mc_cpu;
+	/* Number of bytes taken to setup MC for the req */
+	u32 mc_len;
+	struct pl330_req *r;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+	bool reset_dmac;
+	bool reset_mngr;
+	u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+	u8 id;
+	int ev;
+	/* If the channel is not yet acquired by any client */
+	bool free;
+	/* Parent DMAC */
+	struct pl330_dmac *dmac;
+	/* Only two at a time */
+	struct _pl330_req req[2];
+	/* Index of the last submitted request */
+	unsigned lstenq;
+};
+
+enum pl330_dmac_state {
+	UNINIT,
+	INIT,
+	DYING,
+};
+
+/* A DMAC */
+struct pl330_dmac {
+	spinlock_t		lock;
+	/* Holds list of reqs with due callbacks */
+	struct list_head	req_done;
+	/* Pointer to platform specific stuff */
+	struct pl330_info	*pinfo;
+	/* Maximum possible events/irqs */
+	int			events[32];
+	/* BUS address of MicroCode buffer */
+	u32			mcode_bus;
+	/* CPU address of MicroCode buffer */
+	void			*mcode_cpu;
+	/* List of all Channel threads */
+	struct pl330_thread	*channels;
+	/* Pointer to the MANAGER thread */
+	struct pl330_thread	*manager;
+	/* To handle bad news in interrupt */
+	struct tasklet_struct	tasks;
+	struct _pl330_tbd	dmac_tbd;
+	/* State of DMAC operation */
+	enum pl330_dmac_state	state;
+};
+
+static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+{
+	if (r && r->xfer_cb)
+		r->xfer_cb(r->token, err);
+}
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+		? true : false;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+		? false : true;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	/* MANAGER is indexed at the end */
+	if (thrd->id == pl330->pinfo->pcfg.num_chan)
+		return true;
+	else
+		return false;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_id(struct pl330_info *pi, u32 off)
+{
+	void __iomem *regs = pi->base;
+	u32 id = 0;
+
+	id |= (readb(regs + off + 0x0) << 0);
+	id |= (readb(regs + off + 0x4) << 8);
+	id |= (readb(regs + off + 0x8) << 16);
+	id |= (readb(regs + off + 0xc) << 24);
+
+	return id;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+		enum pl330_dst da, u16 val)
+{
+	if (dry_run)
+		return SZ_DMAADDH;
+
+	buf[0] = CMD_DMAADDH;
+	buf[0] |= (da << 1);
+	*((u16 *)&buf[1]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+		da == 1 ? "DA" : "SA", val);
+
+	return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAEND;
+
+	buf[0] = CMD_DMAEND;
+
+	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+	return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAFLUSHP;
+
+	buf[0] = CMD_DMAFLUSHP;
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+	return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMALD;
+
+	buf[0] = CMD_DMALD;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMALDP;
+
+	buf[0] = CMD_DMALDP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+		unsigned loop, u8 cnt)
+{
+	if (dry_run)
+		return SZ_DMALP;
+
+	buf[0] = CMD_DMALP;
+
+	if (loop)
+		buf[0] |= (1 << 1);
+
+	cnt--; /* DMAC increments by 1 internally */
+	buf[1] = cnt;
+
+	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+	return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+	enum pl330_cond cond;
+	bool forever;
+	unsigned loop;
+	u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+		const struct _arg_LPEND *arg)
+{
+	enum pl330_cond cond = arg->cond;
+	bool forever = arg->forever;
+	unsigned loop = arg->loop;
+	u8 bjump = arg->bjump;
+
+	if (dry_run)
+		return SZ_DMALPEND;
+
+	buf[0] = CMD_DMALPEND;
+
+	if (loop)
+		buf[0] |= (1 << 2);
+
+	if (!forever)
+		buf[0] |= (1 << 4);
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	buf[1] = bjump;
+
+	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+			forever ? "FE" : "END",
+			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+			loop ? '1' : '0',
+			bjump);
+
+	return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAKILL;
+
+	buf[0] = CMD_DMAKILL;
+
+	return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+		enum dmamov_dst dst, u32 val)
+{
+	if (dry_run)
+		return SZ_DMAMOV;
+
+	buf[0] = CMD_DMAMOV;
+	buf[1] = dst;
+	*((u32 *)&buf[2]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+	return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMANOP;
+
+	buf[0] = CMD_DMANOP;
+
+	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+	return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMARMB;
+
+	buf[0] = CMD_DMARMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+	return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+	if (dry_run)
+		return SZ_DMASEV;
+
+	buf[0] = CMD_DMASEV;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+	return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMAST;
+
+	buf[0] = CMD_DMAST;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMASTP;
+
+	buf[0] = CMD_DMASTP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMASTZ;
+
+	buf[0] = CMD_DMASTZ;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+	return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+		unsigned invalidate)
+{
+	if (dry_run)
+		return SZ_DMAWFE;
+
+	buf[0] = CMD_DMAWFE;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	if (invalidate)
+		buf[1] |= (1 << 1);
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+		ev >> 3, invalidate ? ", I" : "");
+
+	return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAWFP;
+
+	buf[0] = CMD_DMAWFP;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (0 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (0 << 0);
+	else
+		buf[0] |= (0 << 1) | (1 << 0);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+	return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAWMB;
+
+	buf[0] = CMD_DMAWMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+	return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+	u8 chan;
+	u32 addr;
+	unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+		const struct _arg_GO *arg)
+{
+	u8 chan = arg->chan;
+	u32 addr = arg->addr;
+	unsigned ns = arg->ns;
+
+	if (dry_run)
+		return SZ_DMAGO;
+
+	buf[0] = CMD_DMAGO;
+	buf[0] |= (ns << 1);
+
+	buf[1] = chan & 0x7;
+
+	*((u32 *)&buf[2]) = addr;
+
+	return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	unsigned long loops = msecs_to_loops(5);
+
+	do {
+		/* Until Manager is Idle */
+		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--loops);
+
+	if (!loops)
+		return true;
+
+	return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+		u8 insn[], bool as_manager)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	val = (insn[0] << 16) | (insn[1] << 24);
+	if (!as_manager) {
+		val |= (1 << 0);
+		val |= (thrd->id << 8); /* Channel Number */
+	}
+	writel(val, regs + DBGINST0);
+
+	val = *((u32 *)&insn[2]);
+	writel(val, regs + DBGINST1);
+
+	/* If timed out due to halted state-machine */
+	if (_until_dmac_idle(thrd)) {
+		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+		return;
+	}
+
+	/* Get going */
+	writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	if (is_manager(thrd))
+		val = readl(regs + DS) & 0xf;
+	else
+		val = readl(regs + CS(thrd->id)) & 0xf;
+
+	switch (val) {
+	case DS_ST_STOP:
+		return PL330_STATE_STOPPED;
+	case DS_ST_EXEC:
+		return PL330_STATE_EXECUTING;
+	case DS_ST_CMISS:
+		return PL330_STATE_CACHEMISS;
+	case DS_ST_UPDTPC:
+		return PL330_STATE_UPDTPC;
+	case DS_ST_WFE:
+		return PL330_STATE_WFE;
+	case DS_ST_FAULT:
+		return PL330_STATE_FAULTING;
+	case DS_ST_ATBRR:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_ATBARRIER;
+	case DS_ST_QBUSY:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_QUEUEBUSY;
+	case DS_ST_WFP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_WFP;
+	case DS_ST_KILL:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_KILLING;
+	case DS_ST_CMPLT:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_COMPLETING;
+	case DS_ST_FLTCMP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_FAULT_COMPLETING;
+	default:
+		return PL330_STATE_INVALID;
+	}
+}
+
+/* If the request 'req' of thread 'thrd' is currently active */
+static inline bool _req_active(struct pl330_thread *thrd,
+		struct _pl330_req *req)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
+
+	if (IS_FREE(req))
+		return false;
+
+	return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
+}
+
+/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
+static inline unsigned _thrd_active(struct pl330_thread *thrd)
+{
+	if (_req_active(thrd, &thrd->req[0]))
+		return 1; /* First req active */
+
+	if (_req_active(thrd, &thrd->req[1]))
+		return 2; /* Second req active */
+
+	return 0;
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+	/* Return if nothing needs to be done */
+	if (_state(thrd) == PL330_STATE_COMPLETING
+		  || _state(thrd) == PL330_STATE_KILLING
+		  || _state(thrd) == PL330_STATE_STOPPED)
+		return;
+
+	_emit_KILL(0, insn);
+
+	/* Stop generating interrupts for SEV */
+	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	struct _pl330_req *req;
+	struct pl330_req *r;
+	struct _arg_GO go;
+	unsigned ns;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	/* Return if already ACTIVE */
+	if (_state(thrd) != PL330_STATE_STOPPED)
+		return true;
+
+	if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
+		req = &thrd->req[1 - thrd->lstenq];
+	else if (!IS_FREE(&thrd->req[thrd->lstenq]))
+		req = &thrd->req[thrd->lstenq];
+	else
+		req = NULL;
+
+	/* Return if no request */
+	if (!req || !req->r)
+		return true;
+
+	r = req->r;
+
+	if (r->cfg)
+		ns = r->cfg->nonsecure ? 1 : 0;
+	else if (readl(regs + CS(thrd->id)) & CS_CNS)
+		ns = 1;
+	else
+		ns = 0;
+
+	/* See 'Abort Sources' point-4 at Page 2-25 */
+	if (_manager_ns(thrd) && !ns)
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+			__func__, __LINE__);
+
+	go.chan = thrd->id;
+	go.addr = req->mc_bus;
+	go.ns = ns;
+	_emit_GO(0, insn, &go);
+
+	/* Set to generate interrupts for SEV */
+	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+	/* Only manager can execute GO */
+	_execute_DBGINSN(thrd, insn, true);
+
+	return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+	switch (_state(thrd)) {
+	case PL330_STATE_FAULT_COMPLETING:
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+		if (_state(thrd) == PL330_STATE_KILLING)
+			UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_FAULTING:
+		_stop(thrd);
+
+	case PL330_STATE_KILLING:
+	case PL330_STATE_COMPLETING:
+		UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_STOPPED:
+		return _trigger(thrd);
+
+	case PL330_STATE_WFP:
+	case PL330_STATE_QUEUEBUSY:
+	case PL330_STATE_ATBARRIER:
+	case PL330_STATE_UPDTPC:
+	case PL330_STATE_CACHEMISS:
+	case PL330_STATE_EXECUTING:
+		return true;
+
+	case PL330_STATE_WFE: /* For RESUME, nothing yet */
+	default:
+		return false;
+	}
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_RMB(dry_run, &buf[off]);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_WMB(dry_run, &buf[off]);
+	}
+
+	return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	switch (pxs->r->rqtype) {
+	case MEMTODEV:
+		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+		break;
+	case DEVTOMEM:
+		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	case MEMTOMEM:
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	default:
+		off += 0x40000000; /* Scare off the Client */
+		break;
+	}
+
+	return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+		unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+	int cyc, cycmax, szlp, szlpend, szbrst, off;
+	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+	struct _arg_LPEND lpend;
+
+	/* Max iterations possibile in DMALP is 256 */
+	if (*bursts >= 256*256) {
+		lcnt1 = 256;
+		lcnt0 = 256;
+		cyc = *bursts / lcnt1 / lcnt0;
+	} else if (*bursts > 256) {
+		lcnt1 = 256;
+		lcnt0 = *bursts / lcnt1;
+		cyc = 1;
+	} else {
+		lcnt1 = *bursts;
+		lcnt0 = 0;
+		cyc = 1;
+	}
+
+	szlp = _emit_LP(1, buf, 0, 0);
+	szbrst = _bursts(1, buf, pxs, 1);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 0;
+	lpend.bjump = 0;
+	szlpend = _emit_LPEND(1, buf, &lpend);
+
+	if (lcnt0) {
+		szlp *= 2;
+		szlpend *= 2;
+	}
+
+	/*
+	 * Max bursts that we can unroll due to limit on the
+	 * size of backward jump that can be encoded in DMALPEND
+	 * which is 8-bits and hence 255
+	 */
+	cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+	cyc = (cycmax < cyc) ? cycmax : cyc;
+
+	off = 0;
+
+	if (lcnt0) {
+		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+		ljmp0 = off;
+	}
+
+	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+	ljmp1 = off;
+
+	off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 1;
+	lpend.bjump = off - ljmp1;
+	off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+	if (lcnt0) {
+		lpend.cond = ALWAYS;
+		lpend.forever = false;
+		lpend.loop = 0;
+		lpend.bjump = off - ljmp0;
+		off += _emit_LPEND(dry_run, &buf[off], &lpend);
+	}
+
+	*bursts = lcnt1 * cyc;
+	if (lcnt0)
+		*bursts *= lcnt0;
+
+	return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	u32 ccr = pxs->ccr;
+	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+	int off = 0;
+
+	while (bursts) {
+		c = bursts;
+		off += _loop(dry_run, &buf[off], &c, pxs);
+		bursts -= c;
+	}
+
+	return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	int off = 0;
+
+	/* DMAMOV SAR, x->src_addr */
+	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+	/* DMAMOV DAR, x->dst_addr */
+	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+	/* Setup Loop(s) */
+	off += _setup_loops(dry_run, &buf[off], pxs);
+
+	return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+		unsigned index, struct _xfer_spec *pxs)
+{
+	struct _pl330_req *req = &thrd->req[index];
+	struct pl330_xfer *x;
+	u8 *buf = req->mc_cpu;
+	int off = 0;
+
+	PL330_DBGMC_START(req->mc_bus);
+
+	/* DMAMOV CCR, ccr */
+	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+	x = pxs->r->x;
+	do {
+		/* Error if xfer length is not aligned at burst size */
+		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+			return -EINVAL;
+
+		pxs->x = x;
+		off += _setup_xfer(dry_run, &buf[off], pxs);
+
+		x = x->next;
+	} while (x);
+
+	/* DMASEV peripheral/event */
+	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+	/* DMAEND */
+	off += _emit_END(dry_run, &buf[off]);
+
+	return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+	u32 ccr = 0;
+
+	if (rqc->src_inc)
+		ccr |= CC_SRCINC;
+
+	if (rqc->dst_inc)
+		ccr |= CC_DSTINC;
+
+	/* We set same protection levels for Src and DST for now */
+	if (rqc->privileged)
+		ccr |= CC_SRCPRI | CC_DSTPRI;
+	if (rqc->nonsecure)
+		ccr |= CC_SRCNS | CC_DSTNS;
+	if (rqc->insnaccess)
+		ccr |= CC_SRCIA | CC_DSTIA;
+
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+
+	ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+	return ccr;
+}
+
+static inline bool _is_valid(u32 ccr)
+{
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+
+	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+	if (dcctl == DINVALID1 || dcctl == DINVALID2
+			|| scctl == SINVALID1 || scctl == SINVALID2)
+		return false;
+	else
+		return true;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+int pl330_submit_req(void *ch_id, struct pl330_req *r)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	struct _xfer_spec xs;
+	unsigned long flags;
+	void __iomem *regs;
+	unsigned idx;
+	u32 ccr;
+	int ret = 0;
+
+	/* No Req or Unacquired Channel or DMAC */
+	if (!r || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	if (pl330->state == DYING
+		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+			__func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* If request for non-existing peripheral */
+	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+		dev_info(thrd->dmac->pinfo->dev,
+				"%s:%d Invalid peripheral(%u)!\n",
+				__func__, __LINE__, r->peri);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	if (_queue_full(thrd)) {
+		ret = -EAGAIN;
+		goto xfer_exit;
+	}
+
+	/* Prefer Secure Channel */
+	if (!_manager_ns(thrd))
+		r->cfg->nonsecure = 0;
+	else
+		r->cfg->nonsecure = 1;
+
+	/* Use last settings, if not provided */
+	if (r->cfg)
+		ccr = _prepare_ccr(r->cfg);
+	else
+		ccr = readl(regs + CC(thrd->id));
+
+	/* If this req doesn't have valid xfer settings */
+	if (!_is_valid(ccr)) {
+		ret = -EINVAL;
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+			__func__, __LINE__, ccr);
+		goto xfer_exit;
+	}
+
+	idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+	xs.ccr = ccr;
+	xs.r = r;
+
+	/* First dry run to check if req is acceptable */
+	ret = _setup_req(1, thrd, idx, &xs);
+	if (ret < 0)
+		goto xfer_exit;
+
+	if (ret > pi->mcbufsz / 2) {
+		dev_info(thrd->dmac->pinfo->dev,
+			"%s:%d Trying increasing mcbufsz\n",
+				__func__, __LINE__);
+		ret = -ENOMEM;
+		goto xfer_exit;
+	}
+
+	/* Hook the request */
+	thrd->lstenq = idx;
+	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+	thrd->req[idx].r = r;
+
+	ret = 0;
+
+xfer_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_submit_req);
+
+static void pl330_dotask(unsigned long data)
+{
+	struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+	struct pl330_info *pi = pl330->pinfo;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	/* The DMAC itself gone nuts */
+	if (pl330->dmac_tbd.reset_dmac) {
+		pl330->state = DYING;
+		/* Reset the manager too */
+		pl330->dmac_tbd.reset_mngr = true;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_dmac = false;
+	}
+
+	if (pl330->dmac_tbd.reset_mngr) {
+		_stop(pl330->manager);
+		/* Reset all channels */
+		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_mngr = false;
+	}
+
+	for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+			struct pl330_thread *thrd = &pl330->channels[i];
+			void __iomem *regs = pi->base;
+			enum pl330_op_err err;
+
+			_stop(thrd);
+
+			if (readl(regs + FSC) & (1 << thrd->id))
+				err = PL330_ERR_FAIL;
+			else
+				err = PL330_ERR_ABORT;
+
+			spin_unlock_irqrestore(&pl330->lock, flags);
+
+			_callback(thrd->req[1 - thrd->lstenq].r, err);
+			_callback(thrd->req[thrd->lstenq].r, err);
+
+			spin_lock_irqsave(&pl330->lock, flags);
+
+			thrd->req[0].r = NULL;
+			thrd->req[1].r = NULL;
+			MARK_FREE(&thrd->req[0]);
+			MARK_FREE(&thrd->req[1]);
+
+			/* Clear the reset flag */
+			pl330->dmac_tbd.reset_chan &= ~(1 << i);
+		}
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+int pl330_update(const struct pl330_info *pi)
+{
+	struct _pl330_req *rqdone;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	void __iomem *regs;
+	u32 val;
+	int id, ev, ret = 0;
+
+	if (!pi || !pi->pl330_data)
+		return 0;
+
+	regs = pi->base;
+	pl330 = pi->pl330_data;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	val = readl(regs + FSM) & 0x1;
+	if (val)
+		pl330->dmac_tbd.reset_mngr = true;
+	else
+		pl330->dmac_tbd.reset_mngr = false;
+
+	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+	pl330->dmac_tbd.reset_chan |= val;
+	if (val) {
+		int i = 0;
+		while (i < pi->pcfg.num_chan) {
+			if (val & (1 << i)) {
+				dev_info(pi->dev,
+					"Reset Channel-%d\t CS-%x FTC-%x\n",
+						i, readl(regs + CS(i)),
+						readl(regs + FTC(i)));
+				_stop(&pl330->channels[i]);
+			}
+			i++;
+		}
+	}
+
+	/* Check which event happened i.e, thread notified */
+	val = readl(regs + ES);
+	if (pi->pcfg.num_events < 32
+			&& val & ~((1 << pi->pcfg.num_events) - 1)) {
+		pl330->dmac_tbd.reset_dmac = true;
+		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+		ret = 1;
+		goto updt_exit;
+	}
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+		if (val & (1 << ev)) { /* Event occured */
+			struct pl330_thread *thrd;
+			u32 inten = readl(regs + INTEN);
+			int active;
+
+			/* Clear the event */
+			if (inten & (1 << ev))
+				writel(1 << ev, regs + INTCLR);
+
+			ret = 1;
+
+			id = pl330->events[ev];
+
+			thrd = &pl330->channels[id];
+
+			active = _thrd_active(thrd);
+			if (!active) /* Aborted */
+				continue;
+
+			active -= 1;
+
+			rqdone = &thrd->req[active];
+			MARK_FREE(rqdone);
+
+			/* Get going again ASAP */
+			_start(thrd);
+
+			/* For now, just make a list of callbacks to be done */
+			list_add_tail(&rqdone->rqd, &pl330->req_done);
+		}
+	}
+
+	/* Now that we are in no hurry, do the callbacks */
+	while (!list_empty(&pl330->req_done)) {
+		rqdone = container_of(pl330->req_done.next,
+					struct _pl330_req, rqd);
+
+		list_del_init(&rqdone->rqd);
+
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		_callback(rqdone->r, PL330_ERR_NONE);
+		spin_lock_irqsave(&pl330->lock, flags);
+	}
+
+updt_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	if (pl330->dmac_tbd.reset_dmac
+			|| pl330->dmac_tbd.reset_mngr
+			|| pl330->dmac_tbd.reset_chan) {
+		ret = 1;
+		tasklet_schedule(&pl330->tasks);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_update);
+
+int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int ret = 0, active;
+
+	if (!thrd || thrd->free || thrd->dmac->state == DYING)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	switch (op) {
+	case PL330_OP_FLUSH:
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		thrd->req[0].r = NULL;
+		thrd->req[1].r = NULL;
+		MARK_FREE(&thrd->req[0]);
+		MARK_FREE(&thrd->req[1]);
+		break;
+
+	case PL330_OP_ABORT:
+		active = _thrd_active(thrd);
+
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		/* ABORT is only for the active req */
+		if (!active)
+			break;
+
+		active--;
+
+		thrd->req[active].r = NULL;
+		MARK_FREE(&thrd->req[active]);
+
+		/* Start the next */
+	case PL330_OP_START:
+		if (!_start(thrd))
+			ret = -EIO;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(pl330_chan_ctrl);
+
+int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	void __iomem *regs;
+	int active;
+	u32 val;
+
+	if (!pstatus || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	/* The client should remove the DMAC and add again */
+	if (pl330->state == DYING)
+		pstatus->dmac_halted = true;
+	else
+		pstatus->dmac_halted = false;
+
+	val = readl(regs + FSC);
+	if (val & (1 << thrd->id))
+		pstatus->faulting = true;
+	else
+		pstatus->faulting = false;
+
+	active = _thrd_active(thrd);
+
+	if (!active) {
+		/* Indicate that the thread is not running */
+		pstatus->top_req = NULL;
+		pstatus->wait_req = NULL;
+	} else {
+		active--;
+		pstatus->top_req = thrd->req[active].r;
+		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
+					? thrd->req[1 - active].r : NULL;
+	}
+
+	pstatus->src_addr = readl(regs + SA(thrd->id));
+	pstatus->dst_addr = readl(regs + DA(thrd->id));
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_chan_status);
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+	int ev;
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++)
+		if (pl330->events[ev] == -1) {
+			pl330->events[ev] = thrd->id;
+			return ev;
+		}
+
+	return -1;
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+void *pl330_request_channel(const struct pl330_info *pi)
+{
+	struct pl330_thread *thrd = NULL;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int chans, i;
+
+	if (!pi || !pi->pl330_data)
+		return NULL;
+
+	pl330 = pi->pl330_data;
+
+	if (pl330->state == DYING)
+		return NULL;
+
+	chans = pi->pcfg.num_chan;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		if (thrd->free) {
+			thrd->ev = _alloc_event(thrd);
+			if (thrd->ev >= 0) {
+				thrd->free = false;
+				thrd->lstenq = 1;
+				thrd->req[0].r = NULL;
+				MARK_FREE(&thrd->req[0]);
+				thrd->req[1].r = NULL;
+				MARK_FREE(&thrd->req[1]);
+				break;
+			}
+		}
+		thrd = NULL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return thrd;
+}
+EXPORT_SYMBOL(pl330_request_channel);
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	/* If the event is valid and was held by the thread */
+	if (ev >= 0 && ev < pi->pcfg.num_events
+			&& pl330->events[ev] == thrd->id)
+		pl330->events[ev] = -1;
+}
+
+void pl330_release_channel(void *ch_id)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+
+	if (!thrd || thrd->free)
+		return;
+
+	_stop(thrd);
+
+	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+	_free_event(thrd, thrd->ev);
+	thrd->free = true;
+	spin_unlock_irqrestore(&pl330->lock, flags);
+}
+EXPORT_SYMBOL(pl330_release_channel);
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_info *pi)
+{
+	void __iomem *regs = pi->base;
+	u32 val;
+
+	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+	val &= CRD_DATA_WIDTH_MASK;
+	pi->pcfg.data_bus_width = 8 * (1 << val);
+
+	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+	val &= CRD_DATA_BUFF_MASK;
+	pi->pcfg.data_buf_dep = val + 1;
+
+	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+	val &= CR0_NUM_CHANS_MASK;
+	val += 1;
+	pi->pcfg.num_chan = val;
+
+	val = readl(regs + CR0);
+	if (val & CR0_PERIPH_REQ_SET) {
+		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+		val += 1;
+		pi->pcfg.num_peri = val;
+		pi->pcfg.peri_ns = readl(regs + CR4);
+	} else {
+		pi->pcfg.num_peri = 0;
+	}
+
+	val = readl(regs + CR0);
+	if (val & CR0_BOOT_MAN_NS)
+		pi->pcfg.mode |= DMAC_MODE_NS;
+	else
+		pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+	val &= CR0_NUM_EVENTS_MASK;
+	val += 1;
+	pi->pcfg.num_events = val;
+
+	pi->pcfg.irq_ns = readl(regs + CR3);
+
+	pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+	pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	thrd->req[0].mc_cpu = pl330->mcode_cpu
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].mc_bus = pl330->mcode_bus
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].r = NULL;
+	MARK_FREE(&thrd->req[0]);
+
+	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+				+ pi->mcbufsz / 2;
+	thrd->req[1].mc_bus = thrd->req[0].mc_bus
+				+ pi->mcbufsz / 2;
+	thrd->req[1].r = NULL;
+	MARK_FREE(&thrd->req[1]);
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Allocate 1 Manager and 'chans' Channel threads */
+	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+					GFP_KERNEL);
+	if (!pl330->channels)
+		return -ENOMEM;
+
+	/* Init Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		thrd->id = i;
+		thrd->dmac = pl330;
+		_reset_thread(thrd);
+		thrd->free = true;
+	}
+
+	/* MANAGER is indexed at the end */
+	thrd = &pl330->channels[chans];
+	thrd->id = chans;
+	thrd->dmac = pl330;
+	thrd->free = false;
+	pl330->manager = thrd;
+
+	return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	int ret;
+
+	/*
+	 * Alloc MicroCode buffer for 'chans' Channel threads.
+	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+	 */
+	pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				&pl330->mcode_bus, GFP_KERNEL);
+	if (!pl330->mcode_cpu) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	ret = dmac_alloc_threads(pl330);
+	if (ret) {
+		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+			__func__, __LINE__);
+		dma_free_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+		return ret;
+	}
+
+	return 0;
+}
+
+int pl330_add(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+	void __iomem *regs;
+	int i, ret;
+
+	if (!pi || !pi->dev)
+		return -EINVAL;
+
+	/* If already added */
+	if (pi->pl330_data)
+		return -EINVAL;
+
+	/*
+	 * If the SoC can perform reset on the DMAC, then do it
+	 * before reading its configuration.
+	 */
+	if (pi->dmac_reset)
+		pi->dmac_reset(pi);
+
+	regs = pi->base;
+
+	/* Check if we can handle this DMAC */
+	if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+			readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+		return -EINVAL;
+	}
+
+	/* Read the configuration of the DMAC */
+	read_dmac_config(pi);
+
+	if (pi->pcfg.num_events == 0) {
+		dev_err(pi->dev, "%s:%d Can't work without events!\n",
+			__func__, __LINE__);
+		return -EINVAL;
+	}
+
+	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+	if (!pl330) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	/* Assign the info structure and private data */
+	pl330->pinfo = pi;
+	pi->pl330_data = pl330;
+
+	spin_lock_init(&pl330->lock);
+
+	INIT_LIST_HEAD(&pl330->req_done);
+
+	/* Use default MC buffer size if not provided */
+	if (!pi->mcbufsz)
+		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+	/* Mark all events as free */
+	for (i = 0; i < pi->pcfg.num_events; i++)
+		pl330->events[i] = -1;
+
+	/* Allocate resources needed by the DMAC */
+	ret = dmac_alloc_resources(pl330);
+	if (ret) {
+		dev_err(pi->dev, "Unable to create channels for DMAC\n");
+		kfree(pl330);
+		return ret;
+	}
+
+	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+	pl330->state = INIT;
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_add);
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Release Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		pl330_release_channel((void *)thrd);
+	}
+
+	/* Free memory */
+	kfree(pl330->channels);
+
+	return 0;
+}
+
+static void dmac_free_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+
+	dmac_free_threads(pl330);
+
+	dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+}
+
+void pl330_del(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+
+	if (!pi || !pi->pl330_data)
+		return;
+
+	pl330 = pi->pl330_data;
+
+	pl330->state = UNINIT;
+
+	tasklet_kill(&pl330->tasks);
+
+	/* Free DMAC resources */
+	dmac_free_resources(pl330);
+
+	kfree(pl330);
+	pi->pl330_data = NULL;
+}
+EXPORT_SYMBOL(pl330_del);
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 8ba7044..9eaf65f 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -35,6 +35,58 @@
 
 #include <asm/hardware/sa1111.h>
 
+/* SA1111 IRQs */
+#define IRQ_GPAIN0		(0)
+#define IRQ_GPAIN1		(1)
+#define IRQ_GPAIN2		(2)
+#define IRQ_GPAIN3		(3)
+#define IRQ_GPBIN0		(4)
+#define IRQ_GPBIN1		(5)
+#define IRQ_GPBIN2		(6)
+#define IRQ_GPBIN3		(7)
+#define IRQ_GPBIN4		(8)
+#define IRQ_GPBIN5		(9)
+#define IRQ_GPCIN0		(10)
+#define IRQ_GPCIN1		(11)
+#define IRQ_GPCIN2		(12)
+#define IRQ_GPCIN3		(13)
+#define IRQ_GPCIN4		(14)
+#define IRQ_GPCIN5		(15)
+#define IRQ_GPCIN6		(16)
+#define IRQ_GPCIN7		(17)
+#define IRQ_MSTXINT		(18)
+#define IRQ_MSRXINT		(19)
+#define IRQ_MSSTOPERRINT	(20)
+#define IRQ_TPTXINT		(21)
+#define IRQ_TPRXINT		(22)
+#define IRQ_TPSTOPERRINT	(23)
+#define SSPXMTINT		(24)
+#define SSPRCVINT		(25)
+#define SSPROR			(26)
+#define AUDXMTDMADONEA		(32)
+#define AUDRCVDMADONEA		(33)
+#define AUDXMTDMADONEB		(34)
+#define AUDRCVDMADONEB		(35)
+#define AUDTFSR			(36)
+#define AUDRFSR			(37)
+#define AUDTUR			(38)
+#define AUDROR			(39)
+#define AUDDTS			(40)
+#define AUDRDD			(41)
+#define AUDSTO			(42)
+#define IRQ_USBPWR		(43)
+#define IRQ_HCIM		(44)
+#define IRQ_HCIBUFFACC		(45)
+#define IRQ_HCIRMTWKP		(46)
+#define IRQ_NHCIMFCIR		(47)
+#define IRQ_USB_PORT_RESUME	(48)
+#define IRQ_S0_READY_NINT	(49)
+#define IRQ_S1_READY_NINT	(50)
+#define IRQ_S0_CD_VALID		(51)
+#define IRQ_S1_CD_VALID		(52)
+#define IRQ_S0_BVD1_STSCHG	(53)
+#define IRQ_S1_BVD1_STSCHG	(54)
+
 extern void __init sa1110_mb_enable(void);
 
 /*
@@ -49,6 +101,7 @@ struct sa1111 {
 	struct clk	*clk;
 	unsigned long	phys;
 	int		irq;
+	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
 #ifdef CONFIG_PM
@@ -152,36 +205,37 @@ static void
 sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
-	void __iomem *base = get_irq_data(irq);
+	struct sa1111 *sachip = get_irq_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
-	stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
-	stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
+	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
 
-	sa1111_writel(stat0, base + SA1111_INTSTATCLR0);
+	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
 
 	desc->chip->ack(irq);
 
-	sa1111_writel(stat1, base + SA1111_INTSTATCLR1);
+	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
 		do_bad_IRQ(irq, desc);
 		return;
 	}
 
-	for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
+	for (i = 0; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
-	for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
+	for (i = 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			handle_edge_irq(i, irq_desc + i);
+			generic_handle_irq(i + sachip->irq_base);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);
 }
 
-#define SA1111_IRQMASK_LO(x)	(1 << (x - IRQ_SA1111_START))
-#define SA1111_IRQMASK_HI(x)	(1 << (x - IRQ_SA1111_START - 32))
+#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
 
 static void sa1111_ack_irq(unsigned int irq)
 {
@@ -189,7 +243,8 @@ static void sa1111_ack_irq(unsigned int irq)
 
 static void sa1111_mask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -199,7 +254,8 @@ static void sa1111_mask_lowirq(unsigned int irq)
 
 static void sa1111_unmask_lowirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie0;
 
 	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -216,8 +272,9 @@ static void sa1111_unmask_lowirq(unsigned int irq)
  */
 static int sa1111_retrigger_lowirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 	int i;
 
@@ -237,8 +294,9 @@ static int sa1111_retrigger_lowirq(unsigned int irq)
 
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -260,8 +318,9 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_LO(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we0;
 
 	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -286,7 +345,8 @@ static struct irq_chip sa1111_low_chip = {
 
 static void sa1111_mask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -296,7 +356,8 @@ static void sa1111_mask_highirq(unsigned int irq)
 
 static void sa1111_unmask_highirq(unsigned int irq)
 {
-	void __iomem *mapbase = get_irq_chip_data(irq);
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned long ie1;
 
 	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -313,8 +374,9 @@ static void sa1111_unmask_highirq(unsigned int irq)
  */
 static int sa1111_retrigger_highirq(unsigned int irq)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 	int i;
 
@@ -334,8 +396,9 @@ static int sa1111_retrigger_highirq(unsigned int irq)
 
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
 	if (flags == IRQ_TYPE_PROBE)
@@ -357,8 +420,9 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
 {
+	struct sa1111 *sachip = get_irq_chip_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
 	unsigned int mask = SA1111_IRQMASK_HI(irq);
-	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long we1;
 
 	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -412,14 +476,14 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 
 	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
 		set_irq_chip(irq, &sa1111_low_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
 	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
 		set_irq_chip(irq, &sa1111_high_chip);
-		set_irq_chip_data(irq, irqbase);
+		set_irq_chip_data(irq, sachip);
 		set_irq_handler(irq, handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
@@ -428,7 +492,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	 * Register SA1111 interrupt
 	 */
 	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-	set_irq_data(sachip->irq, irqbase);
+	set_irq_data(sachip->irq, sachip);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
 
@@ -887,8 +951,6 @@ static int sa1111_resume(struct platform_device *dev)
 	if (!save)
 		return 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-
 	/*
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
@@ -905,6 +967,13 @@ static int sa1111_resume(struct platform_device *dev)
 	 * First of all, wake up the chip.
 	 */
 	sa1111_wake(sachip);
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 
@@ -959,13 +1028,12 @@ static int sa1111_remove(struct platform_device *pdev)
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-
 #ifdef CONFIG_PM
 		kfree(sachip->saved_state);
 		sachip->saved_state = NULL;
 #endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
 	}
 
 	return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 37bda5f..9012004 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -140,6 +140,7 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+#ifdef CONFIG_PM
 static void check_scoop_reg(struct scoop_dev *sdev)
 {
 	unsigned short mcr;
@@ -149,7 +150,6 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 		iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
-#ifdef CONFIG_PM
 static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index f232941..ba65f6e 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -18,6 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
@@ -28,48 +29,6 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-static void vic_ack_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-	/* moreover, clear the soft-triggered, in case it was the reason */
-	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	irq &= 31;
-	writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registeration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
-	int i;
-
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
 #if defined(CONFIG_PM)
 /**
  * struct vic_device - VIC PM device
@@ -99,13 +58,34 @@ struct vic_device {
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
+static int vic_id;
+
 static inline struct vic_device *to_vic(struct sys_device *sys)
 {
 	return container_of(sys, struct vic_device, sysdev);
 }
+#endif /* CONFIG_PM */
 
-static int vic_id;
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+	int i;
 
+	for (i = 0; i < 16; i++) {
+		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+		writel(VIC_VECT_CNTL_ENABLE | i, reg);
+	}
+
+	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
 static int vic_class_resume(struct sys_device *dev)
 {
 	struct vic_device *vic = to_vic(dev);
@@ -159,31 +139,6 @@ struct sysdev_class vic_class = {
 };
 
 /**
- * vic_pm_register - Register a VIC for later power management control
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
-{
-	struct vic_device *v;
-
-	if (vic_id >= ARRAY_SIZE(vic_devices))
-		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-	else {
-		v = &vic_devices[vic_id];
-		v->base = base;
-		v->resume_sources = resume_sources;
-		v->irq = irq;
-		vic_id++;
-	}
-}
-
-/**
  * vic_pm_init - initicall to register VIC pm
  *
  * This is called via late_initcall() to register
@@ -219,9 +174,60 @@ static int __init vic_pm_init(void)
 
 	return 0;
 }
-
 late_initcall(vic_pm_init);
 
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+	struct vic_device *v;
+
+	if (vic_id >= ARRAY_SIZE(vic_devices))
+		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+	else {
+		v = &vic_devices[vic_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		vic_id++;
+	}
+}
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+#endif /* CONFIG_PM */
+
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void vic_mask_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void vic_unmask_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE);
+}
+
+#if defined(CONFIG_PM)
 static struct vic_device *vic_from_irq(unsigned int irq)
 {
         struct vic_device *v = vic_devices;
@@ -255,71 +261,32 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
 
 	return 0;
 }
-
 #else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-
 #define vic_set_wake NULL
 #endif /* CONFIG_PM */
 
 static struct irq_chip vic_chip = {
-	.name	= "VIC",
-	.ack	= vic_ack_irq,
-	.mask	= vic_mask_irq,
-	.unmask	= vic_unmask_irq,
-	.set_wake = vic_set_wake,
+	.name		= "VIC",
+	.ack		= vic_ack_irq,
+	.mask		= vic_mask_irq,
+	.unmask		= vic_unmask_irq,
+	.set_wake	= vic_set_wake,
 };
 
-/* The PL190 cell from ARM has been modified by ST, so handle both here */
-static void vik_init_st(void __iomem *base, unsigned int irq_start,
-			 u32 vic_sources);
-
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
+static void __init vic_disable(void __iomem *base)
 {
-	unsigned int i;
-	u32 cellid = 0;
-	enum amba_vendor vendor;
-
-	/* Identify which VIC cell this one is, by reading the ID */
-	for (i = 0; i < 4; i++) {
-		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
-		cellid |= (readl(addr) & 0xff) << (8 * i);
-	}
-	vendor = (cellid >> 12) & 0xff;
-	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
-	       base, cellid, vendor);
-
-	switch(vendor) {
-	case AMBA_VENDOR_ST:
-		vik_init_st(base, irq_start, vic_sources);
-		return;
-	default:
-		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
-		/* fall through */
-	case AMBA_VENDOR_ARM:
-		break;
-	}
-
-	/* Disable all interrupts initially. */
-
 	writel(0, base + VIC_INT_SELECT);
 	writel(0, base + VIC_INT_ENABLE);
 	writel(~0, base + VIC_INT_ENABLE_CLEAR);
 	writel(0, base + VIC_IRQ_STATUS);
 	writel(0, base + VIC_ITCR);
 	writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+	unsigned int i;
 
-	/*
-	 * Make sure we clear all existing interrupts
-	 */
 	writel(0, base + VIC_PL190_VECT_ADDR);
 	for (i = 0; i < 19; i++) {
 		unsigned int value;
@@ -327,8 +294,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		value = readl(base + VIC_PL190_VECT_ADDR);
 		writel(value, base + VIC_PL190_VECT_ADDR);
 	}
+}
 
-	vic_init2(base);
+static void __init vic_set_irq_sources(void __iomem *base,
+				unsigned int irq_start, u32 vic_sources)
+{
+	unsigned int i;
 
 	for (i = 0; i < 32; i++) {
 		if (vic_sources & (1 << i)) {
@@ -340,8 +311,6 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
 	}
-
-	vic_pm_register(base, irq_start, resume_sources);
 }
 
 /*
@@ -351,20 +320,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
  * the probe function is called twice, with base set to offset 000
  *  and 020 within the page. We call this "second block".
  */
-static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 				u32 vic_sources)
 {
 	unsigned int i;
 	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
 
 	/* Disable all interrupts initially. */
-
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
+	vic_disable(base);
 
 	/*
 	 * Make sure we clear all existing interrupts. The vector registers
@@ -373,13 +336,8 @@ static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
 	 * the second base address, which is 0x20 in the page
 	 */
 	if (vic_2nd_block) {
-		writel(0, base + VIC_PL190_VECT_ADDR);
-		for (i = 0; i < 19; i++) {
-			unsigned int value;
+		vic_clear_interrupts(base);
 
-			value = readl(base + VIC_PL190_VECT_ADDR);
-			writel(value, base + VIC_PL190_VECT_ADDR);
-		}
 		/* ST has 16 vectors as well, but we don't enable them by now */
 		for (i = 0; i < 16; i++) {
 			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
@@ -389,14 +347,52 @@ static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
 		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 	}
 
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
+	vic_set_irq_sources(base, irq_start, vic_sources);
+}
 
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+		     u32 vic_sources, u32 resume_sources)
+{
+	unsigned int i;
+	u32 cellid = 0;
+	enum amba_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
 	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case AMBA_VENDOR_ST:
+		vic_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case AMBA_VENDOR_ARM:
+		break;
+	}
+
+	/* Disable all interrupts initially. */
+	vic_disable(base);
+
+	/* Make sure we clear all existing interrupts */
+	vic_clear_interrupts(base);
+
+	vic_init2(base);
+
+	vic_set_irq_sources(base, irq_start, vic_sources);
+
+	vic_pm_register(base, irq_start, resume_sources);
 }
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
index 6e32a85..92b0f90 100644
--- a/arch/arm/configs/acs5k_defconfig
+++ b/arch/arm/configs/acs5k_defconfig
@@ -1,1232 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Dec 16 13:31:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
index b34b1ea..2a27a14 100644
--- a/arch/arm/configs/acs5k_tiny_defconfig
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -1,940 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Jan  6 13:23:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
-# CONFIG_MACH_KS8695 is not set
-# CONFIG_MACH_DSM320 is not set
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index 64fe7f1..2afdf67 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -1,1258 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Tue Aug 12 22:30:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_AFEB9260=y
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
 CONFIG_RTC_DRV_FM3130=y
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 30927ca..5536c48 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,1148 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun Apr 20 00:29:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="gum"
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
 CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_MACH_GUMSTIX_F=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=2
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_VIRTUAL=m
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
index abe9966..ad2bc50 100644
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,1206 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Wed Oct 28 15:47:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
 CONFIG_MACH_OMAP3517EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LQ043T1DG01=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 3b3a3775..75de45e 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -1,904 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 04:28:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_LBDAF is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=m
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
 CONFIG_MACH_AMS_DELTA=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
 CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_AMS_DELTA=y
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
@@ -906,418 +84,38 @@ CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_AMS_DELTA=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
new file mode 100644
index 0000000..2eef85e
--- /dev/null
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SH7372=y
+CONFIG_MACH_AP4EVB=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
+CONFIG_KEXEC=y
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index daa75bc..558ecd8 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 13:13:30 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_SA1100_FIR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
new file mode 100644
index 0000000..695e32d
--- /dev/null
+++ b/arch/arm/configs/at572d940hfek_defconfig
@@ -0,0 +1,358 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-AT572D940HF"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT572D940HF=y
+CONFIG_MACH_AT572D940HFEB=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+CONFIG_NET=y
+CONFIG_PACKET=m
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_DEBUG_DEVICES=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=m
+CONFIG_MTD=m
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+CONFIG_RFD_FTL=m
+CONFIG_SSFDC=m
+CONFIG_MTD_OOPS=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTD_BLOCK2MTD=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_NANDSIM=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ALAUDA=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_GLUEBI=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_SSC=m
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_VSXXXAA=m
+CONFIG_MOUSE_GPIO=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_RAW=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_N_HDLC=m
+CONFIG_SPECIALIX=m
+CONFIG_STALDRV=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
+CONFIG_HW_RANDOM=y
+CONFIG_R3964=m
+CONFIG_RAW_DRIVER=m
+CONFIG_TCG_TPM=m
+CONFIG_TCG_NSC=m
+CONFIG_TCG_ATMEL=m
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_SPIDEV=m
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_PCM_OSS_PLUGINS is not set
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_USB_HID=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_TEST=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_MMC=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_AT91=m
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1305=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_CHECK=y
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_INOTIFY=y
+CONFIG_FUSE_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_CRAMFS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index b1ab50b..ffb1edd 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -1,1218 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 22:55:57 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91CAP9=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91CAP9 Board Type
-#
 CONFIG_MACH_AT91CAP9ADK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 1fffec8..4438e64 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -1,1009 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:54:30 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_ECO920=y
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index c846a79..ccd517c 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -1,997 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:57:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
 CONFIG_MACH_AT91RM9200EK=y
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 472ea11..f8a9226 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,1039 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:20:50 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
 CONFIG_MACH_AT91SAM9260EK=y
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4ecde42..b46025b 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,1178 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:21:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
 CONFIG_ARCH_AT91SAM9261=y
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9261 Board Type
-#
 CONFIG_MACH_AT91SAM9261EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_INTSRAM is not set
-# CONFIG_FB_ATMEL_STN is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 9b792b6..8a04d6f 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,1207 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:12:20 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
 CONFIG_MACH_AT91SAM9263EK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_AT91=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 64ce106..f1bac70 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -1,1167 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Jun 10 15:51:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
 CONFIG_MACH_AT91SAM9G20EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_AT91_SLOW_CLOCK is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_AT91_AC97 is not set
-
-#
-# SPI devices
-#
 CONFIG_SND_AT73C213=y
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 90e48bf..75621e4 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -1,946 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:24:14 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
 CONFIG_ARCH_AT91SAM9RL=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9RL Board Type
-#
 CONFIG_MACH_AT91SAM9RLEK=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 6315534..1b0e9a1 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1,1311 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:53:18 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_ATEB9200=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=m
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_NET1080=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b175b6b..3a1ad15 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,1242 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 19:00:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
 CONFIG_SA1100_BADGE4=y
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ARTHUR=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+CONFIG_SA1100_FIR=y
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIVHCI=m
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=y
-# CONFIG_VIA_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIVHCI=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=y
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
+CONFIG_USB_MON=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
 CONFIG_USB_RIO500=m
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index 1e12167..75984cd 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -1,724 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-
-#
-# Performance Counters
-#
+CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_BCMRING=y
-# CONFIG_ARCH_FPGA11107 is not set
-CONFIG_ARCH_BCM11107=y
-
-#
-# BCMRING Options
-#
 CONFIG_BCM_ZRELADDR=0x8000
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0e000000
 CONFIG_ZBOOT_ROM_BSS=0x0ea00000
 CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BCM_UMI=y
 CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_FILE_LOCKING is not set
-# CONFIG_FSNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
 # CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index eef33de..cedc92e 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -1,554 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Mar  6 10:07:26 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
 CONFIG_MACH_CAM60=y
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0x20004000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -557,671 +77,98 @@ CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index b6a7063..ac64dbd 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -1,723 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue Jun 14 12:05:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
 CONFIG_MACH_CARMEVA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-CONFIG_ARM_AT91_ETHER_RMII=y
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_NFSD=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index d662cab..dce912d 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -1,902 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 14:19:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
-# CONFIG_SA1100_CERF_FLASH_32MB is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
index 893cd26..8bb0633 100644
--- a/arch/arm/configs/cm_t35_defconfig
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -1,1732 +1,157 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 17:10:40 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
 CONFIG_MACH_CM_T35=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 47d22d0..dcfbcf3 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -1,1369 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:31:36 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
 CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=m
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_ENE_TUNE is not set
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
 CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_UCB1400_CORE=m
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 # CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1373,589 +136,54 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index a334069..921e56a 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,446 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 19:03:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-cm-x300"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA3xx=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -450,1304 +48,141 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_WACOM=m
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
new file mode 100644
index 0000000..313627a
--- /dev/null
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -0,0 +1,72 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_PERF_EVENTS is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_IOSCHED_CFQ=m
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_MACH_CNS3420VB=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=20000
+# CONFIG_MISC_DEVICES is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FSCACHE=y
+CONFIG_TMPFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index c962870..f52c64e 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,443 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
 CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -447,1290 +53,128 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=y
-CONFIG_LIB80211_CRYPT_CCMP=y
-CONFIG_LIB80211_CRYPT_TKIP=y
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 11fdb5a..b985334 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -1,1155 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:13:20 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
 CONFIG_MACH_COLIBRI300=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_AX88796=y
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 26e458d..310f9a6 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,959 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Fri Apr 14 19:09:52 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
 CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 5e4069f..4a1fa81 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,542 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:12:23 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_AKITA is not set
-# CONFIG_MACH_SPITZ is not set
-# CONFIG_MACH_BORZOI is not set
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-# CONFIG_TOSA_BT is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -546,18 +77,9 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -566,848 +88,107 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1415,479 +196,79 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index c9137aa..bbf729e 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -1,1337 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:57:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_AFEB9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
 CONFIG_MACH_CPU9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index d234479..e7d7942 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -1,1327 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 15:03:43 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
 CONFIG_MACH_CPU9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
index 1f8dda6..022aeb5 100644
--- a/arch/arm/configs/cpuat91_defconfig
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -1,1315 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:45:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
 CONFIG_MACH_CPUAT91=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index f095040..a24c448 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1,863 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:19:24 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
 CONFIG_MACH_CSB337=y
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
-# CONFIG_MACH_HOMEMATIC is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_SWEDATMS is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=128
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -871,345 +83,22 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_AT91 is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
 # CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 5071540..98552ad 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -1,937 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Fri Apr  4 22:06:15 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
 CONFIG_MACH_CSB637=y
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -945,276 +79,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index e14c99c..ba66705 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,1331 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DA8XX=y
-# CONFIG_ARCH_DAVINCI_DM365 is not set
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
-CONFIG_DA830_UI_LCD=y
-# CONFIG_DA830_UI_NAND is not set
-CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
-CONFIG_DA850_UI_NONE=y
-# CONFIG_DA850_UI_RMII is not set
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_DAVINCI is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_DA8XX=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_SND_DA830_SOC_EVM is not set
-# CONFIG_SND_DA850_SOC_EVM is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 625035f..2519cc5 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,1835 +1,194 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Mon Oct 12 14:13:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_AINTC=y
-CONFIG_ARCH_DAVINCI_DMx=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-# CONFIG_ARCH_DAVINCI_DA830 is not set
-# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_DAVINCI_DM6467_EVM=y
-CONFIG_MACH_DAVINCI_DM365_EVM=y
-CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_DAVINCI=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
 CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_DM355EVM=m
-CONFIG_INPUT_DM365EVM=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_DAVINCI_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 CONFIG_MFD_DM355EVM_MSP=y
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_DAVINCI_SOC_EVM=m
 CONFIG_SND_DM6467_SOC_EVM=m
-# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# DaVinci 35x and 644x USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_DAVINCI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_DM355EVM is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
new file mode 100644
index 0000000..786cbe4
--- /dev/null
+++ b/arch/arm/configs/devkit8000_defconfig
@@ -0,0 +1,184 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_MACH_DEVKIT8000=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_BT=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=40960
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_DM9000=y
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_MATRIX=y
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_SERIO_RAW=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_GPIO_TWL4030=y
+# CONFIG_HWMON is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_OMAP2_DSS=y
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_GENERIC=y
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_DEBUG=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_OMAP_HS=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index b7b2ab0..9359e1b 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,1619 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:53:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_DOVE=y
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Dove Implementations
-#
 CONFIG_MACH_DOVE_DB=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
index d5e8279..c319418 100644
--- a/arch/arm/configs/ebsa110_defconfig
+++ b/arch/arm/configs/ebsa110_defconfig
@@ -1,747 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 18:29:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 CONFIG_ARCH_EBSA110=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
 CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
 CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
 CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
 CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_MARK=y
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_MATCH_RT=y
 CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_FW_LOADER=m
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_AM79C961A=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index 25dd53b..6bb6abd 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -1,1313 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jun  9 01:30:18 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
 CONFIG_MACH_ECBAT91=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91RM9200_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_AT91_SPI is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ATMEL is not set
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_AT91=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig
index e3a6cd3..7b62be1 100644
--- a/arch/arm/configs/edb7211_defconfig
+++ b/arch/arm/configs/edb7211_defconfig
@@ -1,573 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:48:12 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
 CONFIG_ARCH_EDB7211=y
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_ARCH_EP7211=y
-# CONFIG_EP72XX_ROM_BOOT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index 2bee932..d7db34f 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -1,1140 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:43:31 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
 CONFIG_MACH_EM_X270=y
 CONFIG_MACH_EXEDA=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
 CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_MBX_DEBUG is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1144,597 +136,59 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 35d735e..6d6689c 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,1464 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Tue May 19 12:26:49 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Cirrus EP93xx Implementation Options
-#
 CONFIG_CRUNCH=y
-
-#
-# EP93xx Platforms
-#
-# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
-CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB93XX=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9=y
 CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
 CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_TS7250 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_EP93XX=y
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 74baf57..1691dea 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,1246 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Wed Dec 24 23:35:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_E330=y
-CONFIG_MACH_E350=y
-CONFIG_MACH_E740=y
-CONFIG_MACH_E750=y
-CONFIG_MACH_E400=y
-CONFIG_MACH_E800=y
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_PXA_FICP=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_MFD_TMIO=y
 CONFIG_MFD_T7L66XB=y
 CONFIG_MFD_TC6387XB=y
 CONFIG_MFD_TC6393XB=y
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 9e9057c..c4eeb6d 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,451 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Mon Nov  2 13:18:50 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
-CONFIG_MACH_EZX_A780=y
-CONFIG_MACH_EZX_E680=y
-CONFIG_MACH_EZX_A1200=y
-CONFIG_MACH_EZX_A910=y
-CONFIG_MACH_EZX_E6=y
-CONFIG_MACH_EZX_E2=y
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -458,22 +77,12 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -484,21 +93,15 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -506,15 +109,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -526,21 +121,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -549,10 +133,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -570,38 +150,7 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -611,192 +160,42 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -804,289 +203,38 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_PCAP=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_PCAP=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1105,650 +253,96 @@ CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
 CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_RTC_DRV_PCAP=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1787,214 +381,40 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 04d9793..4f925ea 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -1,234 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:02:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
 CONFIG_ARCH_CATS=y
 CONFIG_ARCH_PERSONAL_SERVER=y
-# CONFIG_ARCH_EBSA285_ADDIN is not set
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-CONFIG_ARCH_EBSA285=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_ATM=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=y
-
-#
-# Parallel IDE high-level drivers
-#
 CONFIG_PARIDE_PD=m
 CONFIG_PARIDE_PCD=m
 CONFIG_PARIDE_PF=m
 CONFIG_PARIDE_PT=m
 CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
 CONFIG_PARIDE_ATEN=m
 CONFIG_PARIDE_BPCK=m
-# CONFIG_PARIDE_BPCK6 is not set
 CONFIG_PARIDE_COMM=m
 CONFIG_PARIDE_DSTR=m
 CONFIG_PARIDE_FIT2=m
 CONFIG_PARIDE_FIT3=m
 CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
 CONFIG_PARIDE_EPIA=m
 CONFIG_PARIDE_FRIQ=m
 CONFIG_PARIDE_FRPW=m
@@ -236,1019 +63,65 @@ CONFIG_PARIDE_KBIC=m
 CONFIG_PARIDE_KTTI=m
 CONFIG_PARIDE_ON20=m
 CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-CONFIG_WINBOND_FIR=m
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_21285_WATCHDOG=m
+CONFIG_977_WATCHDOG=m
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_PRINTER=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFSD=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-# CONFIG_ACORN_PARTITION_ICS is not set
 CONFIG_ACORN_PARTITION_ADFS=y
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-# CONFIG_ACORN_PARTITION_RISCIX is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_CODEPAGE_852=m
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig
index d58142b..e11c7ea 100644
--- a/arch/arm/configs/fortunet_defconfig
+++ b/arch/arm/configs/fortunet_defconfig
@@ -1,556 +1,28 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:51:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
 CONFIG_ARCH_FORTUNET=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
new file mode 100644
index 0000000..4a336ab
--- /dev/null
+++ b/arch/arm/configs/g3evm_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SH7367=y
+CONFIG_MACH_G3EVM=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
+CONFIG_KEXEC=y
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
new file mode 100644
index 0000000..21c6d03
--- /dev/null
+++ b/arch/arm/configs/g4evm_defconfig
@@ -0,0 +1,57 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SH7377=y
+CONFIG_MACH_G4EVM=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
+CONFIG_KEXEC=y
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index a8ad8fb..317960f 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,1163 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 24 00:09:30 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index 5bb7372..ac336f1 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -1,995 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 16:13:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_MACH_H5000=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-CONFIG_USB_PXA25X_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
index 09a6c6a..bee94d2 100644
--- a/arch/arm/configs/h7201_defconfig
+++ b/arch/arm/configs/h7201_defconfig
@@ -1,565 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:11:33 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
 CONFIG_ARCH_H7201=y
-# CONFIG_ARCH_H7202 is not set
-CONFIG_CPU_H7201=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_H720X is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index fedc52b..69405a7 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -1,729 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:15:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
-# CONFIG_ARCH_H7201 is not set
 CONFIG_ARCH_H7202=y
-CONFIG_CPU_H7202=y
-# CONFIG_H7202_SERIAL23 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,19200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 CONFIG_MTD_H720X=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 2da1acf..bed8047 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,766 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 20:58:58 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
index e0ef0d1..edfa1c0 100644
--- a/arch/arm/configs/htcherald_defconfig
+++ b/arch/arm/configs/htcherald_defconfig
@@ -1,1144 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sat Dec  5 12:16:24 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 CONFIG_ARCH_OMAP850=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_HTCWIZARD is not set
 CONFIG_MACH_HERALD=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_182MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM925T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_ZLIB=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
index a192248..fcda057 100644
--- a/arch/arm/configs/igep0020_defconfig
+++ b/arch/arm/configs/igep0020_defconfig
@@ -1,432 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Fri Nov 13 12:01:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
 CONFIG_MACH_IGEP0020=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -436,1118 +51,129 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_EEPROM_93CX6=m
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_SPI=m
-CONFIG_ATH_COMMON=m
-CONFIG_AR9170_USB=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_B43=m
-# CONFIG_B43_SDIO is not set
-# CONFIG_B43_PHY_LP is not set
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-# CONFIG_WL1251 is not set
-# CONFIG_WL1271 is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
 CONFIG_SSB=m
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_PANEL_GENERIC=y
+CONFIG_DISPLAY_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_IGEP0020=y
+# CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_SDHCI=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
new file mode 100644
index 0000000..ade55c8
--- /dev/null
+++ b/arch/arm/configs/imote2_defconfig
@@ -0,0 +1,392 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_INTELMOTE2=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_PM=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_IEEE802154=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PXA2XX=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_PMIC_DA903X=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_PXA=y
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LP3944=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=m
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC16=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 6b0d043..7196ade 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,862 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:14:51 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_INTEGRATOR=y
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Integrator Options
-#
 CONFIG_ARCH_INTEGRATOR_AP=y
-# CONFIG_ARCH_INTEGRATOR_CP is not set
-# CONFIG_INTEGRATOR_IMPD1 is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1022 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ICST525=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_INTEGRATOR=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 3c040cc..4fa94a1 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,1159 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:03 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_IOP13XX=y
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP13XX Implementation Options
-#
-
-#
-# IOP13XX Platform Support
-#
 CONFIG_MACH_IQ81340SC=y
 CONFIG_MACH_IQ81340MC=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfa000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 62a8549..4f2ec3a 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,1389 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 15:49:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
 CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP32x Implementation Options
-#
-
-#
-# IOP32x Platform Types
-#
-CONFIG_MACH_EP80219=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
-CONFIG_IOP3XX_ATU=y
-# CONFIG_MACH_EM7210 is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
 CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 0bc23ec..aa36128 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,1391 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 13:41:41 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP33x Implementation Options
-#
-
-#
-# IOP33x Platform Types
-#
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 8b5b576..9083246 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,1113 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:39 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
 CONFIG_ARCH_ENP2611=y
 CONFIG_ARCH_IXDP2400=y
 CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
 CONFIG_ARCH_IXDP2401=y
 CONFIG_ARCH_IXDP2801=y
-CONFIG_MACH_IXDP28X5=y
-CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_ENP2611_MSF_NET=y
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_WATCHDOG=y
+CONFIG_IXP2000_WATCHDOG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 59c11c9..7fc056a 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,1408 +1,105 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:45 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP23xx Implementation Options
-#
-
-#
-# IXP23xx Platforms
-#
 CONFIG_MACH_ESPRESSO=y
 CONFIG_MACH_IXDP2351=y
 CONFIG_MACH_ROADRUNNER=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index a907ad5..5c50239 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,155 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Jan 27 07:33:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_LOFT=y
@@ -160,190 +18,43 @@ CONFIG_ARCH_IXDP425=y
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
-CONFIG_ARCH_IXDP4XX=y
 CONFIG_MACH_FSG=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
-
-#
-# IXP4xx Options
-#
-CONFIG_DMABOUNCE=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_NPE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -352,102 +63,24 @@ CONFIG_IP_VS_LBLC=m
 CONFIG_IP_VS_LBLCR=m
 CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -460,1132 +93,113 @@ CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
 CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
 CONFIG_SATA_VIA=y
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
 CONFIG_PATA_ARTOP=y
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_IXP4XX_CF=y
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_IXP4XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=m
 CONFIG_HDLC_RAW=m
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_IXP4XX_HSS is not set
 CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
 CONFIG_WAN_ROUTER_DRIVERS=m
-# CONFIG_CYCLADES_SYNC is not set
-# CONFIG_LAPBETHER is not set
-# CONFIG_X25_ASY is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_IXP4XX=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_FSG=y
-
-#
-# LED Triggers
-#
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index d1f1646..ea80e7e 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,960 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Fri Aug 21 15:41:39 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-CONFIG_SA1100_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP7XX=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_HP700=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_HP700=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -993,182 +104,9 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index f661e76..896dbe0 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -1,883 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:54:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KAFA=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 668ba59..9f906a8 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,1304 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Wed Jun  3 13:52:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 5fc44c9..f2e3a90 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,1814 +1,176 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:31:18 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Kirkwood Implementations
-#
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
 CONFIG_MACH_OPENRD_BASE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_NETSPACE_V2=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_HERMES is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index e6f2276..47c4883 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -1,1021 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Fri Dec  5 10:30:27 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index af75951..faa2865 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -1,875 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:53:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
 CONFIG_SA1100_LART=y
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_LART=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_LART=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
 CONFIG_CRC32=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 6df7b14..e1eaff7 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -1,1146 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 03:07:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_LOKI=y
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Marvell Loki (88RC8480) Implementations
-#
 CONFIG_MACH_LB88RC8480=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_MV=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index aeb7686..1c8c9ee 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,1031 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:51 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index 6116fee..20caaab 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -1,877 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Nov  3 14:15:32 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
+# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
 CONFIG_MACH_LPD7A400=y
-# CONFIG_MACH_LPD7A404 is not set
-CONFIG_ARCH_LH7A400=y
-CONFIG_LPD7A40X_CPLD_SSP=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADS7843_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 142cccd..1efcce9 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -1,1127 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 17:50:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
-# CONFIG_MACH_LPD7A400 is not set
 CONFIG_MACH_LPD7A404=y
-CONFIG_ARCH_LH7A404=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADC_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
-# CONFIG_FB_ARMCLCD_HITACHI is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_LH7=y
-CONFIG_USB_LH7=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 75c6293..c4ba274 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -1,800 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:18:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
 CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LUBBOCK=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_G_SERIAL=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
index c1a1fb0..816fc42 100644
--- a/arch/arm/configs/lusl7200_defconfig
+++ b/arch/arm/configs/lusl7200_defconfig
@@ -1,453 +1,23 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:24:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_FIQ=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_L7200=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x00010000
 CONFIG_ZBOOT_ROM_BSS=0xf03e0000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 8e9a723..af805e8 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,432 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Jan 30 12:42:03 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -436,1101 +56,127 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DS2760=y
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
 CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_BQ24022=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_BQ24022=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 1cddb61..04efa1b 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -1,794 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 20:00:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index d2a90eb..2472a95 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -1,383 +1,38 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Wed May 20 12:29:51 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -385,82 +40,21 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -470,10 +64,6 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
@@ -484,298 +74,60 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_INFTL=y
 CONFIG_RFD_FTL=y
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
 CONFIG_MTD_LPDDR=y
-CONFIG_MTD_QINFO_PROBE=y
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_SENSORS_TSL2550=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
 CONFIG_ZD1211RW=m
 CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -784,1065 +136,159 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=128
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_S3C24XX=y
-# CONFIG_SPI_S3C24XX_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IBMAEM is not set
-# CONFIG_SENSORS_IBMPEX is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=m
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
-# CONFIG_USB_STORAGE_FREECOM is not set
 CONFIG_USB_STORAGE_ISD200=m
 CONFIG_USB_STORAGE_USBAT=m
 CONFIG_USB_STORAGE_SDDR09=m
 CONFIG_USB_STORAGE_SDDR55=m
 CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 CONFIG_USB_SERIAL_CP210X=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
 CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1882,165 +328,41 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2048,7 +370,6 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2056,41 +377,8 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
new file mode 100644
index 0000000..47ad3b1
--- /dev/null
+++ b/arch/arm/configs/mmp2_defconfig
@@ -0,0 +1,88 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MMP=y
+CONFIG_MACH_FLINT=y
+CONFIG_MACH_MARVELL_JASPER=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
+CONFIG_VFP=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_PXA=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_MAX8925=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MAX8649=y
+CONFIG_REGULATOR_MAX8925=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_MAX8925=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX8925=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index fe25e3b..2b8f7af 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -1,894 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Nov  7 01:36:45 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_GPIOS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_GOLDFISH is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_MSM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# MSM7200 Board Type
-#
 CONFIG_MACH_HALIBUT=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_SERIAL_MSM_NOINIT is not set
-CONFIG_MSM_SMD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_MSM_NAND=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_GOLDFISH_NAND is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-CONFIG_MSM_RMNET=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_GPIO=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DCC_TTY=y
-# CONFIG_GOLDFISH_TTY is not set
-CONFIG_BINDER=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MSM=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9633=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_AKM8976=y
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_LOW_MEMORY_KILLER=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_MSM=y
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# USB Function Support
-#
-CONFIG_USB_FUNCTION=y
-CONFIG_USB_FUNCTION_MSM_HSUSB=y
-# CONFIG_USB_FUNCTION_NULL is not set
-# CONFIG_USB_FUNCTION_ZERO is not set
-# CONFIG_USB_FUNCTION_LOOPBACK is not set
-CONFIG_USB_FUNCTION_ADB=y
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Android
-#
-# CONFIG_ANDROID_GADGET is not set
-# CONFIG_ANDROID_RAM_CONSOLE is not set
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_VIBRATOR=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 6afa2c1..b0d0824 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,1686 +1,140 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:22:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
 CONFIG_ARCH_MV78XX0=y
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Marvell MV78xx0 Implementations
-#
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
+CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index f575070..2f38d97 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,1104 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:11:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Freescale MXC Implementations
-#
 CONFIG_ARCH_MX1=y
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX1 platforms:
-#
-CONFIG_MACH_MXLADS=y
+CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_IMX=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
deleted file mode 100644
index 3cabbb6..0000000
--- a/arch/arm/configs/mx1ads_defconfig
+++ /dev/null
@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 1ecd627..6454e18 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -1,1169 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Tue Apr 14 16:58:09 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-CONFIG_MACH_MX21=y
-# CONFIG_MACH_MX27 is not set
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX21ADS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index edfdd6f..b2038b0 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,1273 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Fri Jul 24 16:08:06 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
index d409537..2d29329 100644
--- a/arch/arm/configs/mx31pdk_defconfig
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -1,772 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Sun Oct 26 15:55:29 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
 # CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
 CONFIG_MACH_MX31_3DS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 8a06bc6..161f907 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,203 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 22:56:24 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-CONFIG_ARCH_MX3=y
-# CONFIG_ARCH_MXC91231 is not set
-CONFIG_ARCH_MX31=y
-CONFIG_ARCH_MX35=y
-
-#
-# MX3 platforms:
-#
-CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
@@ -212,1001 +26,98 @@ CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-CONFIG_ARCH_HAS_RNGA=y
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-CONFIG_MFD_WM8350=y
-CONFIG_MFD_WM8350_CONFIG_MODE_0=y
-CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
 CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_FB_MX3=y
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 0000000..a665ecb
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,171 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_RELAY=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MX5=y
+CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_STANDALONE is not set
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=m
+CONFIG_NETDEVICES=y
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_KEYS=y
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 75cae18..993e94d 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -1,1420 +1,138 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8-omap1
-# Fri Jan 18 10:21:06 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_GPIO_SWITCH=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_STI=y
-CONFIG_OMAP_STI_CONSOLE=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
 CONFIG_MACH_NOKIA770=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIBRF6150=y
-# CONFIG_BT_HCIH4P is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP_HW=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-CONFIG_SENSORS_TLV320AIC23=y
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
-# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
 CONFIG_SND_DUMMY=y
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_OMAP_AIC23=y
-# CONFIG_SND_OMAP_TSC2101 is not set
-# CONFIG_SND_SX1 is not set
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-CONFIG_CBUS=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USER=y
-CONFIG_CBUS_TAHVO_USB=y
-# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_USER=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_RTC=y
-CONFIG_CBUS_RETU_WDT=y
-# CONFIG_CBUS_RETU_HEADSET is not set
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index e6f667c..56aebb6 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -1,1103 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug  6 22:17:23 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
 CONFIG_MACH_NOKIA_N8X0=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_HAVE_MTD_OTP=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
 CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_OMAP=y
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_MENELAUS=y
+CONFIG_REGULATOR=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_TUSB6010=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_MMC=y
+CONFIG_MMC_OMAP=y
+CONFIG_EXT3_FS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index d165c75..462dd18 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -1,1301 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Jul 29 10:46:54 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
-# CONFIG_MACH_USB_A9263 is not set
 CONFIG_MACH_NEOCORE926=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 # CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_MMC_AT91=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 171265e..d7dc992 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,1141 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 14:28:26 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
 CONFIG_PCMCIA_SA1111=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
-# CONFIG_ULTRA is not set
-CONFIG_SMC91X=y
 CONFIG_SMC9194=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_SA1111=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-CONFIG_USB_MOUSE=m
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 78f58a9..25ed772 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,1043 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:18:42 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
 CONFIG_IP_NF_QUEUE=y
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_21285 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_21285_WATCHDOG is not set
-CONFIG_977_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=y
 CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_MAUI is not set
 CONFIG_SOUND_YM3812=y
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_WAVEARTIST=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 2a97e36..316af54 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -1,923 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Tue Jun  6 15:26:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_NETX=y
-
-#
-# NetX Implementations
-#
 CONFIG_MACH_NXDKN=y
 CONFIG_MACH_NXDB500=y
 CONFIG_MACH_NXEB500HMI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySMX0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_NET_NETX=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_NETX=y
 CONFIG_SERIAL_NETX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_NETX=m
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 92d9086..0e2dc26 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,388 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 23 22:57:16 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_NOMADIK=y
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Nomadik boards
-#
 CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_NOMADIK_8815=y
-CONFIG_I2C_BITBANG_8815NHK=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
 CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -392,924 +46,87 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_TESTS=m
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_NOMADIK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_PL061 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
index 7dc1580..1f528a0 100644
--- a/arch/arm/configs/ns9xxx_defconfig
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -3,26 +3,11 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_A9M9360=y
-CONFIG_MACH_A9M9750=y
-CONFIG_MACH_CC7UCAMRY=y
-CONFIG_MACH_CC9C=y
-CONFIG_MACH_CC9P9210=y
-CONFIG_MACH_CC9P9210JS=y
-CONFIG_MACH_CC9P9215=y
-CONFIG_MACH_CC9P9215JS=y
 CONFIG_MACH_CC9P9360DEV=y
 CONFIG_MACH_CC9P9360JS=y
-CONFIG_MACH_CC9P9360VAL=y
-CONFIG_MACH_CC9P9750DEV=y
-CONFIG_MACH_CC9P9750VAL=y
-CONFIG_MACH_CCW9C=y
-CONFIG_MACH_INC20OTTER=y
-CONFIG_MACH_OTTER=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_FPE_NWFPE=y
@@ -39,24 +24,18 @@ CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_NS9XXX_ETH=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_NS921X=y
-CONFIG_SERIAL_NS921X_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_ADC_NS9215=m
 CONFIG_I2C=m
 CONFIG_I2C_GPIO=m
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_DEBUG is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
@@ -65,7 +44,6 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_NS9215=m
 CONFIG_EXT2_FS=m
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
@@ -73,7 +51,6 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/nuc910_defconfig b/arch/arm/configs/nuc910_defconfig
index f80848a..10180cf 100644
--- a/arch/arm/configs/nuc910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 10 22:09:25 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-CONFIG_CPU_W90P910=y
-
-#
-# W90P910 Machines
-#
-CONFIG_MACH_W90P910EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
index 97300ec..27aa873 100644
--- a/arch/arm/configs/nuc950_defconfig
+++ b/arch/arm/configs/nuc950_defconfig
@@ -1,921 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:31:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC950=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
 CONFIG_MACH_W90P950EVB=y
-
-#
-# NUC960 Machines
-#
-# CONFIG_MACH_W90N960EVB is not set
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_FB_NUC900=y
+CONFIG_GPM1040A0_320X240=y
+CONFIG_FB_NUC900_DEBUG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
index aa7e128..56fd7ad 100644
--- a/arch/arm/configs/nuc960_defconfig
+++ b/arch/arm/configs/nuc960_defconfig
@@ -1,921 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:20:11 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC960=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
-# CONFIG_MACH_W90P950EVB is not set
-
-#
-# NUC960 Machines
-#
 CONFIG_MACH_W90N960EVB=y
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index c7999f5..aa24172 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -1,1387 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Wed Oct  1 17:14:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP3_BEAGLE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
index 367be98..5db9a6b 100644
--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
@@ -1,488 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Tue Dec  1 14:04:02 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_ARCH_OMAP4=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
+CONFIG_MACH_OMAP_GENERIC=y
+CONFIG_ARCH_OMAP2420=y
+CONFIG_ARCH_OMAP2430=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
+CONFIG_MACH_OMAP_H4=y
+CONFIG_MACH_OMAP_APOLLON=y
+CONFIG_MACH_OMAP_2430SDP=y
 CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
 CONFIG_MACH_OMAP_LDP=y
 CONFIG_MACH_OVERO=y
 CONFIG_MACH_OMAP3EVM=y
 CONFIG_MACH_OMAP3517EVM=y
 CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
 CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_N8X0=y
 CONFIG_MACH_NOKIA_RX51=y
 CONFIG_MACH_OMAP_ZOOM2=y
 CONFIG_MACH_OMAP_ZOOM3=y
 CONFIG_MACH_CM_T35=y
 CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_SBC3530=y
 CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
+CONFIG_MACH_OMAP_4430SDP=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -492,1627 +96,197 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
 CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
+CONFIG_MENELAUS=y
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
+CONFIG_TWL4030_POWER=y
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_031M3R is not set
-# CONFIG_FB_OMAP_048M3R is not set
-CONFIG_FB_OMAP_079M3R=y
-# CONFIG_FB_OMAP_092M9R is not set
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
-# CONFIG_SND_OMAP_SOC_SDP3430 is not set
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
-# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_ZERO=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 86cc4be..3b072e8 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1,1533 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 18 14:01:52 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
 CONFIG_MACH_OMAP3EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index f74eb9a..d5a6226 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -1,1448 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec  5 11:54:09 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
 CONFIG_MACH_OMAP3_PANDORA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD_NAND_OMAP2=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_TWL4030_POWER=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_TPO_TD043MTEA1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DRIVERS=y
-CONFIG_SND_USB=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_TWL4030=y
-
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_COMPAT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BRIGHT is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DELL is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_ETH=m
+CONFIG_TWL4030_USB=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_TWL4030=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
+CONFIG_CIFS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
+# CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-
-# added by hand for now
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_USB_OTG_UTILS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC_OMAP_HS=y
-
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
new file mode 100644
index 0000000..1d1ab0b
--- /dev/null
+++ b/arch/arm/configs/omap3_stalker_lks_defconfig
@@ -0,0 +1,150 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_MACH_SBC3530=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_GPIO_TWL4030=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_LL=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
index 74fe6be..e988ecc 100644
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -1,475 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Fri Dec  4 16:02:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
-# CONFIG_IPV6_PIMSM_V2 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
@@ -481,33 +97,21 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -516,38 +120,24 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_IP_VS=m
 CONFIG_IP_VS_IPV6=y
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -558,18 +148,8 @@ CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -581,22 +161,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -605,10 +173,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -626,62 +190,19 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -696,15 +217,9 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_DRR=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
@@ -712,20 +227,7 @@ CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -735,10 +237,6 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTSDIO=y
 CONFIG_BT_HCIUART=y
@@ -748,230 +246,38 @@ CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
 CONFIG_BT_HCIBFUSB=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -979,22 +285,15 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1002,44 +301,8 @@ CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-# CONFIG_WIMAX_I2400M_USB is not set
-# CONFIG_WIMAX_I2400M_SDIO is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 # CONFIG_ATM_DRIVERS is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -1050,620 +313,81 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
 CONFIG_BATTERY_BQ27x00=y
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_OXU210HP_HCD=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
 CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
 CONFIG_USB_SERIAL_ARK3116=m
@@ -1671,7 +395,6 @@ CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1707,14 +430,11 @@ CONFIG_USB_SERIAL_MOTOROLA=m
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
 CONFIG_USB_SERIAL_SIEMENS_MPI=m
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1722,441 +442,95 @@ CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_SERIAL_OPTICON=m
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ZERO_HNPTEST=y
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 CONFIG_UIO_PDRV=m
 CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_XATTR=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
 CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2195,183 +569,37 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2379,7 +607,6 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2387,44 +614,8 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index 45b4eba..0cf4147 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -1,1303 +1,136 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:47:37 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
 # CONFIG_OMAP_MUX_WARNINGS is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
-# CONFIG_ARCH_OMAP2420 is not set
 CONFIG_ARCH_OMAP2430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
 CONFIG_MACH_OMAP_2430SDP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_GPIO=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MENELAUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_OMAP24XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index bb2917e..5dbe595 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,1726 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc9-omap1
-# Tue Sep 15 16:48:34 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-# CONFIG_LEDS_OMAP_PWM is not set
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
index d25c3d4..8e8f4e9 100644
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -1,1610 +1,154 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 12:21:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
 CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 3de640a..63e0c2d 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,887 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Sun Dec  6 23:37:45 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_4430SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PL310_ERRATA_588369=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_LOCAL_TIMERS is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_KS8851=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
+CONFIG_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index cc86342..0b24858 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -1,961 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:07:29 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OMAP2 is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 61744e5..0e42ba4 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -1,1171 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:20:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index d773857..5e536cf 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -1,1177 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:01:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
index 6ec487e..c0867b1 100644
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -1,1087 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:02:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_ARTHUR=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AN2720 is not set
 # CONFIG_USB_BELKIN is not set
 # CONFIG_USB_ARMLINUX is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
index 7218b96..ac08e51 100644
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -1,654 +1,37 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:48 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_ROMFS_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 5231895..e2de2aa 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,1338 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2-omap1
-# Wed Feb 20 17:12:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
-CONFIG_OMAP_ARM_60MHZ=y
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 CONFIG_DEBUG_DRIVER=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-CONFIG_SPI_TSC2101=y
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_TEST=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-# CONFIG_OMAP_DSP is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index b12b406..858f93a 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -1,1119 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
 CONFIG_MACH_OMAP_H4=y
-# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
-# CONFIG_MACH_OMAP2_H4_USB1 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=y
 CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_OMAP_IR=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-CONFIG_GPIOEXPANDER_OMAP=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_MENELAUS=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index e9c1408..265af26 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -1,1252 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:02 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-CONFIG_OMAP_PS2=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
index fea9319..cc7fbf8 100644
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -1,838 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:05 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 0efb4b0..c7bb558 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -1,1259 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OMAP_LDP=y
-# CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index 556fcca..9105de7 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,1090 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3-omap1
-# Fri Nov 23 12:24:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
-# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_OMAP_CF=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
index 9a15d5d..aa777e6 100644
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -1,927 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP730=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_PERSEUS2=y
-# CONFIG_MACH_OMAP_FSAMPLE is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_195MHZ is not set
 CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index a82e813..0a7ed44 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,1544 +1,143 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Fri Jun 12 17:25:46 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_ZOOM2=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL4030_POWEROFF is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ZERO=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
index a3e3c82..f8085b0 100644
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -1,1610 +1,155 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 13:04:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_OMAP_ZOOM3=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
+CONFIG_RTC_DRV_TWL4030=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 19b91de..1579857 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,1133 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:18 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_MACH_ONEARM=y
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AT91 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3..439323b 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,189 +1,16 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:52:21 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Orion Implementations
-#
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
@@ -192,6 +19,7 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
@@ -205,1611 +33,147 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
 CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
 # CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index bf06d366..6fa1b14 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -1,426 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Fri Oct  3 11:50:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OVERO=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -430,209 +61,34 @@ CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_93CX6=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -640,64 +96,36 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
 CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
@@ -707,1178 +135,141 @@ CONFIG_USB_NET_RNDIS_HOST=m
 CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
index feffaa2..828d7cb 100644
--- a/arch/arm/configs/palmte_defconfig
+++ b/arch/arm/configs/palmte_defconfig
@@ -1,760 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Sat May 19 11:04:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
 CONFIG_MACH_OMAP_PALMTE=y
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_OMAP_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
index 55d5b7d..31d02c4 100644
--- a/arch/arm/configs/palmtt_defconfig
+++ b/arch/arm/configs/palmtt_defconfig
@@ -1,843 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3-omap1
-# Sun Oct 29 00:36:12 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-CONFIG_OMAP_LL_DEBUG_UART2=y
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
 CONFIG_MACH_OMAP_PALMTT=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_OMAP_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_TSC2102 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OMAP=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_OMAP=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 CONFIG_RTC_DRV_OMAP=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# Synchronous Serial Interfaces (SSI)
-#
-# CONFIG_OMAP_UWIRE is not set
-# CONFIG_OMAP_TSC2101 is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6efc746..c478db6 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -1,890 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:13:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-z71"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
 CONFIG_MACH_OMAP_PALMZ71=y
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_TSC2046 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 6d162b1..4baa83c 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -1,950 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Sun Aug 24 02:29:27 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
-CONFIG_MACH_PALMZ72=y
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index fa153f2..583a061 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -1,1095 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Dec 21 10:52:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 6e7155c..4c9afa4 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -1,355 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 16:19:50 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_PICOTUX2XX=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -359,429 +55,70 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
 CONFIG_SENSORS_ADM1029=m
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
@@ -796,440 +133,49 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_PCF8591=m
 CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VT1211 is not set
 CONFIG_SENSORS_W83781D=m
 CONFIG_SENSORS_W83791D=m
 CONFIG_SENSORS_W83792D=m
 CONFIG_SENSORS_W83793=m
 CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=m
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_AT91=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1269,115 +215,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index dbfabb5..d1efbdc 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -1,745 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:03:02 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
 CONFIG_SA1100_PLEB=y
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 2f7b9ce..bd481f0 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -1,272 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Mon Sep 11 13:59:24 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PNX4008=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -277,64 +60,10 @@ CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
 CONFIG_IP6_NF_QUEUE=m
-
-#
-# DECnet: Netfilter Configuration
-#
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -354,42 +83,17 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
 CONFIG_LLC2=m
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -397,23 +101,11 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
 CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -426,303 +118,71 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=m
 CONFIG_MTD_DOC2001=m
 CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_NANDSIM=m
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_SCSI_SATA=m
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_WAN=y
 CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
 CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
 CONFIG_LAPBETHER=m
 CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -738,44 +198,15 @@ CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_VSXXXAA=m
@@ -799,736 +230,187 @@ CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
 CONFIG_JOYSTICK_STINGER=m
-# CONFIG_JOYSTICK_TWIDJOY is not set
 CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_GUNZE=m
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-# CONFIG_DVB_CX24123 is not set
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-# CONFIG_DVB_S5H1420 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-# CONFIG_DVB_ZL10353 is not set
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-
-#
-# Miscellaneous devices
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_USBPCWATCHDOG=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_SL811_HCD=m
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
 CONFIG_USB_SERIAL_IPW=m
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
 CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
 CONFIG_NCPFS_STRONG=y
 CONFIG_NCPFS_NFS_NS=y
 CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
 CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
 CONFIG_ACORN_PARTITION_RISCIX=y
 CONFIG_OSF_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_ATARI_PARTITION=y
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
 CONFIG_SGI_PARTITION=y
 CONFIG_ULTRIX_PARTITION=y
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1567,96 +449,24 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 791b8c3..74d7e01 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:43:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910 Implmentations
-#
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
-# CONFIG_MACH_TTC_DKB is not set
-CONFIG_CPU_PXA168=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
+CONFIG_MACH_AVENGERS_LITE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 3365c5d..917a070 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -1,796 +1,59 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
 CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 82ca6c8..1677a06 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,1331 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Mon Jul 13 22:48:49 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-CONFIG_CPU_PXA930=y
-CONFIG_CPU_PXA935=y
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-CONFIG_MACH_ZYLONITE=y
 CONFIG_MACH_LITTLETON=y
 CONFIG_MACH_TAVOREVB=y
 CONFIG_MACH_SAAR=y
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_MOUSE_PXA930_TRKBALL=y
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_GPIO_MAX7301=y
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_DA903X=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 94e20fe..1cd381e 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:45:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_MACH_TAVOREVB=y
-
-#
-# Marvell PXA168/910 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
 CONFIG_MACH_TTC_DKB=y
-CONFIG_CPU_PXA910=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 12d0d64..9160f3b 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 12:28:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
 CONFIG_MACH_QIL_A9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_AT91_EARLY_DBGU is not set
 CONFIG_AT91_EARLY_USART0=y
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_M41T94=y
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
new file mode 100644
index 0000000..f7caa90
--- /dev/null
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -0,0 +1,208 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_IDLE=y
+CONFIG_PM=y
+CONFIG_APM_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_ISL29003=y
+CONFIG_TI_DAC7512=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_NET1080 is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PXA=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_PDA_POWER=y
+CONFIG_BATTERY_DS2760=m
+CONFIG_SENSORS_LIS3_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MAX8660=y
+CONFIG_FB=y
+CONFIG_FB_PXA=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_SOC_RAUMFELD=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_MMC=y
+CONFIG_MMC_PXA=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LT3593=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+CONFIG_UIO=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_INOTIFY=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 1237017..9312ef9 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -1,1095 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:41:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
-# CONFIG_MACH_REALVIEW_PB1176 is not set
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index a509a5e..fb75192 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,1090 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index e9124a0..af278f7 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -1,910 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Mon Aug  6 16:47:24 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ZONE_DMA=y
-CONFIG_FIQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_RPC=y
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_ARCH_ACORN=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM610=y
 CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
-CONFIG_CPU_32v3=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V3=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V3=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V3=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_TIMER_ACORN=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_ARXESCSI=m
 CONFIG_SCSI_CUMANA_2=m
 CONFIG_SCSI_EESOXSCSI=m
 CONFIG_SCSI_POWERTECSCSI=y
-
-#
-# The following drivers are not fully supported
-#
 CONFIG_SCSI_CUMANA_1=m
 CONFIG_SCSI_OAK1=m
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_ICSIDE=y
-# CONFIG_MD is not set
+CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_RISCPC=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_RPCKBD=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_ACORN=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_ACORN=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ACORN=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_VIDC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=y
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=y
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -920,14 +116,8 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
 CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
@@ -937,79 +127,9 @@ CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=m
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index b6eeebb..ffaef43 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1,461 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 15:28:56 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
 CONFIG_MACH_NOKIA_RX51=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
+CONFIG_PHONET=y
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -465,717 +61,80 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_DPI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_ACX565AKM=y
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -1185,638 +144,79 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_G_NOKIA=m
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_OMAP_HS=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=m
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2f10dae..f9096c1 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,489 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C24XX_DCLK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=128
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C24XX_GPIO_EXTRA128=y
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
-CONFIG_MACH_SMDK=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_DEV_HSMMC=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_SIMTEC_NOR=y
-CONFIG_MACH_BAST_IDE=y
-
-#
-# S3C2410 Machines
-#
+CONFIG_S3C_ADC=y
+CONFIG_S3C24XX_PWM=y
 CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
-CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
 CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
-CONFIG_BAST_PC104_IRQ=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
-CONFIG_CPU_S3C2412=y
-CONFIG_S3C2412_DMA=y
-CONFIG_S3C2412_PM=y
-
-#
-# S3C2412 Machines
-#
 CONFIG_MACH_JIVE=y
-# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
+CONFIG_MACH_SMDK2416=y
 CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2440=y
+CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
-CONFIG_CPU_S3C2442=y
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_S3C2443_DMA=y
-
-#
-# S3C2443 Machines
-#
+CONFIG_MACH_RX1950=y
 CONFIG_MACH_SMDK2443=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -496,21 +96,13 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -522,7 +114,6 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -536,7 +127,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -545,42 +135,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
-# CONFIG_IP_VS_RR is not set
-# CONFIG_IP_VS_WRR is not set
-# CONFIG_IP_VS_LC is not set
-# CONFIG_IP_VS_WLC is not set
-# CONFIG_IP_VS_LBLC is not set
-# CONFIG_IP_VS_LBLCR is not set
-# CONFIG_IP_VS_DH is not set
-# CONFIG_IP_VS_SH is not set
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -592,22 +147,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -616,10 +159,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -637,33 +176,6 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -673,12 +185,6 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -687,385 +193,58 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
 CONFIG_EEPROM_93CX6=m
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
 CONFIG_BLK_DEV_PLATFORM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_HAVE_PATA_PLATFORM=y
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
 CONFIG_JOYSTICK_A3D=m
@@ -1079,9 +258,6 @@ CONFIG_JOYSTICK_INTERACT=m
 CONFIG_JOYSTICK_SIDEWINDER=m
 CONFIG_JOYSTICK_TMDC=m
 CONFIG_JOYSTICK_IFORCE=m
-# CONFIG_JOYSTICK_IFORCE_USB is not set
-# CONFIG_JOYSTICK_IFORCE_232 is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
 CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
@@ -1095,39 +271,8 @@ CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_JOYSTICK_XPAD=m
 CONFIG_JOYSTICK_XPAD_FF=y
 CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
@@ -1137,666 +282,67 @@ CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2412=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
 CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_TLE62X0=m
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_PMS=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_VIDEO_AU0828=m
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_CADET=m
-CONFIG_RADIO_RTRACK=m
-CONFIG_RADIO_RTRACK2=m
-CONFIG_RADIO_AZTECH=m
-CONFIG_RADIO_GEMTEK=m
-CONFIG_RADIO_SF16FMI=m
-CONFIG_RADIO_SF16FMR2=m
-CONFIG_RADIO_TERRATEC=m
-CONFIG_RADIO_TRUST=m
-CONFIG_RADIO_TYPHOON=m
-CONFIG_RADIO_TYPHOON_PROC_FS=y
-CONFIG_RADIO_ZOLTRIX=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_DVB_DYNAMIC_MINORS=y
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-# CONFIG_DVB_USB_A800 is not set
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-# CONFIG_DVB_USB_GL861 is not set
-# CONFIG_DVB_USB_AU6610 is not set
-# CONFIG_DVB_USB_DIGITV is not set
-# CONFIG_DVB_USB_VP7045 is not set
-# CONFIG_DVB_USB_VP702X is not set
-# CONFIG_DVB_USB_GP8PSK is not set
-# CONFIG_DVB_USB_NOVA_T_USB2 is not set
-# CONFIG_DVB_USB_TTUSB2 is not set
-# CONFIG_DVB_USB_DTT200U is not set
-# CONFIG_DVB_USB_OPERA1 is not set
-CONFIG_DVB_USB_AF9005=m
-# CONFIG_DVB_USB_AF9005_REMOTE is not set
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
-# CONFIG_SND_USB_CAIAQ_INPUT is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=m
-CONFIG_SND_S3C_I2SV2_SOC=m
-CONFIG_SND_S3C2412_SOC_I2S=m
-CONFIG_SND_S3C2443_SOC_AC97=m
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-CONFIG_SND_SOC_L3=m
-CONFIG_SND_SOC_UDA134X=m
-CONFIG_SND_SOC_WM8750=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_APPLE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_U132_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
 CONFIG_USB_STORAGE_FREECOM=m
 CONFIG_USB_STORAGE_ISD200=m
@@ -1809,69 +355,15 @@ CONFIG_USB_STORAGE_ONETOUCH=m
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
 CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
@@ -1879,7 +371,6 @@ CONFIG_USB_SEVSEG=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
@@ -1890,298 +381,64 @@ CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
 CONFIG_MMC_SPI=m
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP5521=m
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_DAC124S085=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2802=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2220,213 +477,13 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index f56e50f..ba6a515 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,843 +1,93 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Mon Nov  3 10:10:30 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-CONFIG_PLAT_S3C64XX=y
-CONFIG_CPU_S3C6400_INIT=y
-CONFIG_CPU_S3C6400_CLOCK=y
-CONFIG_S3C64XX_SETUP_I2C0=y
-CONFIG_S3C64XX_SETUP_I2C1=y
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_CPU_S3C6410=y
-CONFIG_S3C6410_SETUP_SDHCI=y
+CONFIG_MACH_SMDK6400=y
+CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
-CONFIG_SMDK6410_SD_CH0=y
-# CONFIG_SMDK6410_SD_CH1 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
+CONFIG_MACH_NCP=y
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_PM=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+CONFIG_EEPROM_AT24=y
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+CONFIG_FB=y
+CONFIG_FB_S3C=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_COMPAT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SOC=m
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_SOC_SMDK_WM9713=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
new file mode 100644
index 0000000..0b0266c
--- /dev/null
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -0,0 +1,65 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_S5P6440=y
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_MACH_SMDK6440=y
+CONFIG_CPU_32v6K=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+CONFIG_FPE_NWFPE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_S3C_UART=1
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
new file mode 100644
index 0000000..0e92a78
--- /dev/null
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -0,0 +1,65 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_S5P6442=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_MACH_SMDK6442=y
+CONFIG_CPU_32v6K=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+CONFIG_FPE_NWFPE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_S3C_UART=1
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index dc108af..41bafc9 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,891 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jul  1 15:53:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-CONFIG_ARCH_S5PC1XX=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_PLAT_S5PC1XX=y
-CONFIG_CPU_S5PC100_INIT=y
-CONFIG_CPU_S5PC100_CLOCK=y
-CONFIG_S5PC100_SETUP_I2C0=y
-CONFIG_CPU_S5PC100=y
+CONFIG_ARCH_S5PC100=y
 CONFIG_MACH_SMDKC100=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
new file mode 100644
index 0000000..22c2d14
--- /dev/null
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -0,0 +1,66 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_S5PV210=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_MACH_SMDKC110=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_S3C_UART=1
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
new file mode 100644
index 0000000..1753836
--- /dev/null
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -0,0 +1,66 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_S5PV210=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_MACH_SMDKV210=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_S3C_UART=1
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 81b290a..ecf2531 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -1,987 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 14 02:01:07 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
 CONFIG_MACH_SAM9_L9260=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=3
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-# CONFIG_MISC_DEVICES is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RTC_DRV_DS1553=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1020,77 +141,8 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index 7c49bc3..b0b9694 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -1,869 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:26:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
 CONFIG_SA1100_SHANNON=y
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=y
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 46de124..caa07db 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,1248 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git6
-# Thu Jan  8 17:14:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_VIA82C505=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-CONFIG_CS89x0_NOEEPROM=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_KAHLUA is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index ee25e63..af3b12e 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -1,451 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:10:36 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="oe1"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
 CONFIG_SA1100_SIMPAD=y
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
@@ -455,110 +40,33 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -567,395 +75,37 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=800
-CONFIG_INPUT_TSDEV_SCREEN_Y=600
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spear300_defconfig b/arch/arm/configs/spear300_defconfig
new file mode 100644
index 0000000..cf29f3e
--- /dev/null
+++ b/arch/arm/configs/spear300_defconfig
@@ -0,0 +1,51 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear310_defconfig b/arch/arm/configs/spear310_defconfig
new file mode 100644
index 0000000..824e444
--- /dev/null
+++ b/arch/arm/configs/spear310_defconfig
@@ -0,0 +1,52 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear320_defconfig b/arch/arm/configs/spear320_defconfig
new file mode 100644
index 0000000..842f7f3
--- /dev/null
+++ b/arch/arm/configs/spear320_defconfig
@@ -0,0 +1,52 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_MACH_SPEAR320=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear600_defconfig b/arch/arm/configs/spear600_defconfig
new file mode 100644
index 0000000..6777c11
--- /dev/null
+++ b/arch/arm/configs/spear600_defconfig
@@ -0,0 +1,49 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR6XX=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 7d89489..aebd4bb 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,539 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:25:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -543,18 +74,9 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -563,774 +85,105 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1338,483 +191,85 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
new file mode 100644
index 0000000..d5e260b
--- /dev/null
+++ b/arch/arm/configs/stamp9g20_defconfig
@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_CPU_IDLE=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_W1_SLAVE_DS2431=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_INOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
index b1a3a97..94a2d90 100644
--- a/arch/arm/configs/stmp378x_defconfig
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -1,1140 +1,128 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 02:44:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-# CONFIG_ARCH_STMP37XX is not set
 CONFIG_ARCH_STMP378X=y
-# CONFIG_MACH_STMP37XX is not set
-CONFIG_MACH_STMP378X=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# RDS decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_EVENT_TRACER is not set
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
index a3751c9..d8ee58c 100644
--- a/arch/arm/configs/stmp37xx_defconfig
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -1,1001 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.1
-# Mon Apr 20 04:41:26 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-CONFIG_ARCH_STMP37XX=y
-# CONFIG_ARCH_STMP378X is not set
-CONFIG_MACH_STMP37XX=y
-# CONFIG_MACH_STMP378X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_STMP_DBG is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 8a9e7e6..20a8618 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -1,1117 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:16:10 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
 CONFIG_MACH_SX1=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_OMAP_AIC23 is not set
-# CONFIG_SND_OMAP_TSC2101 is not set
-CONFIG_SND_SX1=y
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
 CONFIG_NLS_ISO8859_5=y
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index dccf14b..e89ca19 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -1,883 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7-hammer
-# Thu Mar 27 16:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_PLAT_S3C24XX=y
-# CONFIG_S3C2410_DMA is not set
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_TCT_HAMMER=y
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_ETH=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 # CONFIG_PROC_SYSCTL is not set
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 1e8f5a2..37f4834 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,409 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon Apr 30 21:23:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
-CONFIG_MACH_TRIZEPS4_CONXS=y
-# CONFIG_MACH_TRIZEPS4_ANY is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -413,370 +57,63 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=y
 CONFIG_MTD_DOC2001=y
 CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE=y
-CONFIG_MTD_DOCECC=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
-# CONFIG_MTD_DOCPROBE_55AA is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_PATA_PLATFORM=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_HERMES=y
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=y
-# CONFIG_ZD1211RW is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_HERMES=y
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -785,920 +122,105 @@ CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_PXA=y
 CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 9155196..46e5e07 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,1225 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan  6 00:01:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_TCM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# ST-Ericsson AB U300/U330/U335/U365 Platform
-#
-
-#
-# ST-Ericsson Mobile Platform Products
-#
 CONFIG_MACH_U300=y
-
-#
-# ST-Ericsson U300/U330/U335/U365 Feature Selections
-#
-# CONFIG_MACH_U300_BS2X is not set
-# CONFIG_MACH_U300_BS330 is not set
 CONFIG_MACH_U300_BS335=y
-# CONFIG_MACH_U300_BS365 is not set
-# CONFIG_MACH_U300_SINGLE_RAM is not set
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
-# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
 CONFIG_MACH_U300_SPIDUMMY=y
-
-#
-# All the settings below must match the bootloader's settings
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_STU300=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_PL022=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_COH901327_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-CONFIG_AB3100_CORE=y
-CONFIG_AB3100_OTP=y
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-CONFIG_REGULATOR_AB3100=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_AB3100=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
 CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_COH901318=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 727aff9..be80f03 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,679 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Mon Nov 30 11:11:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_ARCH_U8500=y
-CONFIG_PLAT_NOMADIK=y
-CONFIG_HAS_MTU=y
-
-#
-# ST-Ericsson platform type
-#
-
-#
-# ST-Ericsson Multicore Mobile Platforms
-#
-CONFIG_MACH_U8500_MOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PL022=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 87b700e..2e39f38 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -1,1141 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:39:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_USB_A9260=y
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 7f018ed..ee82d09 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -1,1133 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:15:19 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
 CONFIG_MACH_USB_A9263=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index a1af0b9..0ce710f 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,1000 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Mon May  8 20:15:57 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
 CONFIG_MACH_VERSATILE_AB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
 CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_ARMMMCI=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 909887a..9d7bf5e 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -1,1676 +1,174 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 17:12:07 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_ARCH_VIPER=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_PWM=m
-CONFIG_PXA_HAVE_ISA_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_SPARSE_RAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
 CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=m
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 84a72ac..70d47db 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -1,1128 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 09:02:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=".xcep-itech"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLOCK is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
 CONFIG_MACH_XCEP=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
 CONFIG_SENSORS_MAX6650=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 3b627aa..30c537f 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -1,1215 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 09:53:59 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
 CONFIG_MACH_YL9200=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=3
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S1D135XX=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
 CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=y
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_FILE_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index fca5ff6..960f655 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -1,2031 +1,189 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Dec  8 20:27:05 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_MACH_ARCOM_ZEUS=y
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_ARCOM_PCMCIA=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PXA_HAVE_ISA_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SOC_COMMON=m
 CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
 CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_P54_COMMON is not set
 CONFIG_RT2X00=m
-# CONFIG_RT2500USB is not set
 CONFIG_RT73USB=m
-# CONFIG_RT2800USB is not set
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=7
 CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_PXA is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=m
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 00f46d9..6e8f05c 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -149,10 +149,10 @@
 
 #define USER(x...)				\
 9999:	x;					\
-	.section __ex_table,"a";		\
+	.pushsection __ex_table,"a";		\
 	.align	3;				\
 	.long	9999b,9001f;			\
-	.previous
+	.popsection
 
 /*
  * SMP data memory barrier
@@ -193,10 +193,10 @@
 	.error	"Unsupported inc macro argument"
 	.endif
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	9999b, \abort
-	.previous
+	.popsection
 	.endm
 
 	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
@@ -234,10 +234,10 @@
 	.error	"Unsupported inc macro argument"
 	.endif
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	9999b, \abort
-	.previous
+	.popsection
 	.endr
 	.endm
 
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index d0daeab..7e79503 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -24,7 +24,7 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
@@ -40,12 +40,12 @@ static inline void atomic_add(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -58,12 +58,12 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -78,12 +78,12 @@ static inline void atomic_sub(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -96,12 +96,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -118,11 +118,11 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
+		"ldrex	%1, [%3]\n"
 		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
+		"teq	%1, %4\n"
+		"strexeq %0, %5, [%3]\n"
+		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
 		    : "cc");
 	} while (res);
@@ -137,12 +137,12 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 	unsigned long tmp, tmp2;
 
 	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
+	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
 	: "r" (addr), "Ir" (mask)
 	: "cc");
 }
@@ -235,6 +235,234 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 #define smp_mb__before_atomic_inc()	smp_mb()
 #define smp_mb__after_atomic_inc()	smp_mb()
 
+#ifndef CONFIG_GENERIC_ATOMIC64
+typedef struct {
+	u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+static inline u64 atomic64_read(atomic64_t *v)
+{
+	u64 result;
+
+	__asm__ __volatile__("@ atomic64_read\n"
+"	ldrexd	%0, %H0, [%1]"
+	: "=&r" (result)
+	: "r" (&v->counter), "Qo" (v->counter)
+	);
+
+	return result;
+}
+
+static inline void atomic64_set(atomic64_t *v, u64 i)
+{
+	u64 tmp;
+
+	__asm__ __volatile__("@ atomic64_set\n"
+"1:	ldrexd	%0, %H0, [%2]\n"
+"	strexd	%0, %3, %H3, [%2]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=Qo" (v->counter)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+	u64 result;
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic64_add\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+{
+	u64 result;
+	unsigned long tmp;
+
+	smp_mb();
+
+	__asm__ __volatile__("@ atomic64_add_return\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+
+	smp_mb();
+
+	return result;
+}
+
+static inline void atomic64_sub(u64 i, atomic64_t *v)
+{
+	u64 result;
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic64_sub\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
+{
+	u64 result;
+	unsigned long tmp;
+
+	smp_mb();
+
+	__asm__ __volatile__("@ atomic64_sub_return\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+
+	smp_mb();
+
+	return result;
+}
+
+static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
+{
+	u64 oldval;
+	unsigned long res;
+
+	smp_mb();
+
+	do {
+		__asm__ __volatile__("@ atomic64_cmpxchg\n"
+		"ldrexd		%1, %H1, [%3]\n"
+		"mov		%0, #0\n"
+		"teq		%1, %4\n"
+		"teqeq		%H1, %H4\n"
+		"strexdeq	%0, %5, %H5, [%3]"
+		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
+		: "r" (&ptr->counter), "r" (old), "r" (new)
+		: "cc");
+	} while (res);
+
+	smp_mb();
+
+	return oldval;
+}
+
+static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
+{
+	u64 result;
+	unsigned long tmp;
+
+	smp_mb();
+
+	__asm__ __volatile__("@ atomic64_xchg\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	strexd	%1, %4, %H4, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
+	: "r" (&ptr->counter), "r" (new)
+	: "cc");
+
+	smp_mb();
+
+	return result;
+}
+
+static inline u64 atomic64_dec_if_positive(atomic64_t *v)
+{
+	u64 result;
+	unsigned long tmp;
+
+	smp_mb();
+
+	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, #1\n"
+"	sbc	%H0, %H0, #0\n"
+"	teq	%H0, #0\n"
+"	bmi	2f\n"
+"	strexd	%1, %0, %H0, [%3]\n"
+"	teq	%1, #0\n"
+"	bne	1b\n"
+"2:"
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+
+	smp_mb();
+
+	return result;
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+	u64 val;
+	unsigned long tmp;
+	int ret = 1;
+
+	smp_mb();
+
+	__asm__ __volatile__("@ atomic64_add_unless\n"
+"1:	ldrexd	%0, %H0, [%4]\n"
+"	teq	%0, %5\n"
+"	teqeq	%H0, %H5\n"
+"	moveq	%1, #0\n"
+"	beq	2f\n"
+"	adds	%0, %0, %6\n"
+"	adc	%H0, %H0, %H6\n"
+"	strexd	%2, %0, %H0, [%4]\n"
+"	teq	%2, #0\n"
+"	bne	1b\n"
+"2:"
+	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
+	: "r" (&v->counter), "r" (u), "r" (a)
+	: "cc");
+
+	if (ret)
+		smp_mb();
+
+	return ret;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
+
+#else /* !CONFIG_GENERIC_ATOMIC64 */
+#include <asm-generic/atomic64.h>
+#endif
 #include <asm-generic/atomic-long.h>
 #endif
 #endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index c77d2fa..4656a24 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -15,6 +15,7 @@
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
+#include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -42,7 +43,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 
@@ -196,21 +198,6 @@
  *	DMA Cache Coherency
  *	===================
  *
- *	dma_inv_range(start, end)
- *
- *		Invalidate (discard) the specified virtual address range.
- *		May not write back any entries.  If 'start' or 'end'
- *		are not cache line aligned, those lines must be written
- *		back.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	dma_clean_range(start, end)
- *
- *		Clean (write back) the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
  *	dma_flush_range(start, end)
  *
  *		Clean and invalidate the specified virtual address range.
@@ -227,15 +214,10 @@ struct cpu_cache_fns {
 	void (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_area)(void *, size_t);
 
-	void (*dma_inv_range)(const void *, const void *);
-	void (*dma_clean_range)(const void *, const void *);
-	void (*dma_flush_range)(const void *, const void *);
-};
+	void (*dma_map_area)(const void *, size_t, int);
+	void (*dma_unmap_area)(const void *, size_t, int);
 
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
+	void (*dma_flush_range)(const void *, const void *);
 };
 
 /*
@@ -258,8 +240,8 @@ extern struct cpu_cache_fns cpu_cache;
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_inv_range			cpu_cache.dma_inv_range
-#define dmac_clean_range		cpu_cache.dma_clean_range
+#define dmac_map_area			cpu_cache.dma_map_area
+#define dmac_unmap_area		cpu_cache.dma_unmap_area
 #define dmac_flush_range		cpu_cache.dma_flush_range
 
 #else
@@ -284,58 +266,23 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
-#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
+#define dmac_map_area			__glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area		__glue(_CACHE,_dma_unmap_area)
 #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
 
-extern void dmac_inv_range(const void *, const void *);
-extern void dmac_clean_range(const void *, const void *);
+extern void dmac_map_area(const void *, size_t, int);
+extern void dmac_unmap_area(const void *, size_t, int);
 extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user
  * space" model to handle this.
  */
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
-	} while (0)
-
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+	unsigned long, void *, const void *, unsigned long);
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	do {							\
 		memcpy(dst, src, len);				\
@@ -369,17 +316,6 @@ vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	}
 }
 
-static inline void
-vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr,
-			 unsigned long len, int write)
-{
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-		unsigned long addr = (unsigned long)kaddr;
-		__cpuc_coherent_kern_range(addr, addr + len);
-	}
-}
-
 #ifndef CONFIG_CPU_CACHE_VIPT
 #define flush_cache_mm(mm) \
 		vivt_flush_cache_mm(mm)
@@ -387,15 +323,10 @@ vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		vivt_flush_cache_range(vma,start,end)
 #define flush_cache_page(vma,addr,pfn) \
 		vivt_flush_cache_page(vma,addr,pfn)
-#define flush_ptrace_access(vma,page,ua,ka,len,write) \
-		vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-				unsigned long uaddr, void *kaddr,
-				unsigned long len, int write);
 #endif
 
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
@@ -440,12 +371,26 @@ static inline void __flush_icache_all(void)
 #ifdef CONFIG_ARM_ERRATA_411920
 	extern void v6_icache_inval_all(void);
 	v6_icache_inval_all();
+#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
+	asm("mcr	p15, 0, %0, c7, c1, 0	@ invalidate I-cache inner shareable\n"
+	    :
+	    : "r" (0));
 #else
 	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
 	    :
 	    : "r" (0));
 #endif
 }
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+	  __cpuc_flush_dcache_area(addr, (size_t)size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
+	  __cpuc_flush_dcache_area(addr, (size_t)size);
+}
 
 #define ARCH_HAS_FLUSH_ANON_PAGE
 static inline void flush_anon_page(struct vm_area_struct *vma,
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index b6ec7c6..b56c138 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -13,6 +13,7 @@
 #define __ASM_CLKDEV_H
 
 struct clk;
+struct device;
 
 struct clk_lookup {
 	struct list_head	node;
@@ -27,4 +28,7 @@ struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
 void clkdev_add(struct clk_lookup *cl);
 void clkdev_drop(struct clk_lookup *cl);
 
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
 #endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index a96300b..69ce072 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -57,18 +57,58 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 #endif
 
 /*
- * DMA-consistent mapping functions.  These allocate/free a region of
- * uncached, unwrite-buffered mapped memory space for use with DMA
- * devices.  This is the "generic" version.  The PCI specific version
- * is in pci.h
+ * The DMA API is built upon the notion of "buffer ownership".  A buffer
+ * is either exclusively owned by the CPU (and therefore may be accessed
+ * by it) or exclusively owned by the DMA device.  These helper functions
+ * represent the transitions between these two ownership states.
  *
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ * Note, however, that on later ARMs, this notion does not work due to
+ * speculative prefetches.  We model our approach on the assumption that
+ * the CPU does do speculative prefetches, which means we clean caches
+ * before transfers and delay cache invalidation until transfer completion.
+ *
+ * Private support functions: these are not part of the API and are
+ * liable to change.  Drivers must not use these.
  */
-extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
-extern void dma_cache_maint_page(struct page *page, unsigned long offset,
-				 size_t size, int rw);
+static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	extern void ___dma_single_cpu_to_dev(const void *, size_t,
+		enum dma_data_direction);
+
+	if (!arch_is_coherent())
+		___dma_single_cpu_to_dev(kaddr, size, dir);
+}
+
+static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	extern void ___dma_single_dev_to_cpu(const void *, size_t,
+		enum dma_data_direction);
+
+	if (!arch_is_coherent())
+		___dma_single_dev_to_cpu(kaddr, size, dir);
+}
+
+static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
+	size_t size, enum dma_data_direction dir)
+{
+	extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
+		size_t, enum dma_data_direction);
+
+	if (!arch_is_coherent())
+		___dma_page_cpu_to_dev(page, off, size, dir);
+}
+
+static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
+	size_t size, enum dma_data_direction dir)
+{
+	extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
+		size_t, enum dma_data_direction);
+
+	if (!arch_is_coherent())
+		___dma_page_dev_to_cpu(page, off, size, dir);
+}
 
 /*
  * Return whether the given device DMA address mask can be supported
@@ -88,6 +128,14 @@ static inline int dma_supported(struct device *dev, u64 mask)
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
+#ifdef CONFIG_DMABOUNCE
+	if (dev->archdata.dmabounce) {
+		if (dma_mask >= ISA_DMA_THRESHOLD)
+			return 0;
+		else
+			return -EIO;
+	}
+#endif
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;
 
@@ -304,8 +352,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 {
 	BUG_ON(!valid_dma_direction(dir));
 
-	if (!arch_is_coherent())
-		dma_cache_maint(cpu_addr, size, dir);
+	__dma_single_cpu_to_dev(cpu_addr, size, dir);
 
 	return virt_to_dma(dev, cpu_addr);
 }
@@ -329,8 +376,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 {
 	BUG_ON(!valid_dma_direction(dir));
 
-	if (!arch_is_coherent())
-		dma_cache_maint_page(page, offset, size, dir);
+	__dma_page_cpu_to_dev(page, offset, size, dir);
 
 	return page_to_dma(dev, page) + offset;
 }
@@ -352,7 +398,7 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	/* nothing to do */
+	__dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
 }
 
 /**
@@ -372,7 +418,8 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	/* nothing to do */
+	__dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
+		size, dir);
 }
 #endif /* CONFIG_DMABOUNCE */
 
@@ -400,7 +447,10 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 {
 	BUG_ON(!valid_dma_direction(dir));
 
-	dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
+	if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
+		return;
+
+	__dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
 }
 
 static inline void dma_sync_single_range_for_device(struct device *dev,
@@ -412,8 +462,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 	if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
 		return;
 
-	if (!arch_is_coherent())
-		dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
+	__dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
 }
 
 static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index a399bb5..51662fe 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -9,6 +9,8 @@
 #include <asm/ptrace.h>
 #include <asm/user.h>
 
+struct task_struct;
+
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_freg_t[3];
 
@@ -98,6 +100,7 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+struct task_struct;
 int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 #define ELF_CORE_COPY_TASK_REGS dump_task_regs
 
diff --git a/arch/arm/include/asm/entry-macro-vic2.S b/arch/arm/include/asm/entry-macro-vic2.S
new file mode 100644
index 0000000..3ceb85e
--- /dev/null
+++ b/arch/arm/include/asm/entry-macro-vic2.S
@@ -0,0 +1,57 @@
+/* arch/arm/include/asm/entry-macro-vic2.S
+ *
+ * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for a device with two VICs
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* This should be included from <mach/entry-macro.S> with the necessary
+ * defines for virtual addresses and IRQ bases for the two vics.
+ *
+ * The code needs the following defined:
+ *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
+ *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
+ *	VA_VIC0		Virtual address of VIC0
+ *	VA_VIC1		Virtual address of VIC1
+ *
+ * Note, code assumes VIC0's virtual address is an ARM immediate constant
+ * away from VIC1.
+*/
+
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, #IRQ_VIC0_BASE + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index bfcc159..540a044 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -21,14 +21,14 @@
 	"2:	strt	%0, [%2]\n"				\
 	"	mov	%0, #0\n"				\
 	"3:\n"							\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.previous\n"					\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"4:	mov	%0, %4\n"				\
 	"	b	3b\n"					\
-	"	.previous"					\
+	"	.popsection"					\
 	: "=&r" (ret), "=&r" (oldval)				\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
@@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
-	"	.section __ex_table,\"a\"\n"
+	"	.pushsection __ex_table,\"a\"\n"
 	"	.align	3\n"
 	"	.long	1b, 4f, 2b, 4f\n"
-	"	.previous\n"
-	"	.section .fixup,\"ax\"\n"
+	"	.popsection\n"
+	"	.pushsection .fixup,\"ax\"\n"
 	"4:	mov	%0, %4\n"
 	"	b	3b\n"
-	"	.previous"
+	"	.popsection"
 	: "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
 	: "cc", "memory");
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 182310b..6d7485a 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -12,7 +12,9 @@ typedef struct {
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
-#if NR_IRQS > 256
+#if NR_IRQS > 512
+#define HARDIRQ_BITS	10
+#elif NR_IRQS > 256
 #define HARDIRQ_BITS	9
 #else
 #define HARDIRQ_BITS	8
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
index 04be3bd..c0f4e7b 100644
--- a/arch/arm/include/asm/hardware/arm_timer.h
+++ b/arch/arm/include/asm/hardware/arm_timer.h
@@ -1,21 +1,30 @@
 #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
 #define __ASM_ARM_HARDWARE_ARM_TIMER_H
 
-#define TIMER_LOAD	0x00
-#define TIMER_VALUE	0x04
-#define TIMER_CTRL	0x08
-#define TIMER_CTRL_ONESHOT	(1 << 0)
-#define TIMER_CTRL_32BIT	(1 << 1)
-#define TIMER_CTRL_DIV1		(0 << 2)
-#define TIMER_CTRL_DIV16	(1 << 2)
-#define TIMER_CTRL_DIV256	(2 << 2)
-#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
-#define TIMER_CTRL_PERIODIC	(1 << 6)
-#define TIMER_CTRL_ENABLE	(1 << 7)
+/*
+ * ARM timer implementation, found in Integrator, Versatile and Realview
+ * platforms.  Not all platforms support all registers and bits in these
+ * registers, so we mark them with A for Integrator AP, C for Integrator
+ * CP, V for Versatile and R for Realview.
+ *
+ * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
+ * can have 16-bit or 32-bit selectable via a bit in the control register.
+ */
+#define TIMER_LOAD	0x00			/* ACVR rw */
+#define TIMER_VALUE	0x04			/* ACVR ro */
+#define TIMER_CTRL	0x08			/* ACVR rw */
+#define TIMER_CTRL_ONESHOT	(1 << 0)	/*  CVR */
+#define TIMER_CTRL_32BIT	(1 << 1)	/*  CVR */
+#define TIMER_CTRL_DIV1		(0 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV16	(1 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV256	(2 << 2)	/* ACVR */
+#define TIMER_CTRL_IE		(1 << 5)	/*   VR */
+#define TIMER_CTRL_PERIODIC	(1 << 6)	/* ACVR */
+#define TIMER_CTRL_ENABLE	(1 << 7)	/* ACVR */
 
-#define TIMER_INTCLR	0x0c
-#define TIMER_RIS	0x10
-#define TIMER_MIS	0x14
-#define TIMER_BGLOAD	0x18
+#define TIMER_INTCLR	0x0c			/* ACVR wo */
+#define TIMER_RIS	0x10			/*  CVR ro */
+#define TIMER_MIS	0x14			/*  CVR ro */
+#define TIMER_BGLOAD	0x18			/*  CVR rw */
 
 #endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index cdb9022..6bcba48 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -21,6 +21,9 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #define L2X0_CACHE_ID			0x000
+#define   L2X0_CACHE_ID_PART_MASK	(0xf << 6)
+#define   L2X0_CACHE_ID_PART_L210	(1 << 6)
+#define   L2X0_CACHE_ID_PART_L310	(3 << 6)
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h
new file mode 100644
index 0000000..10382a3
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/include/asm/hardware/icst.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST_H
+#define ASMARM_HARDWARE_ICST_H
+
+struct icst_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned long	vco_min;	/* exclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+	const unsigned char *s2div;	/* chip specific s2div array */
+	const unsigned char *idx2s;	/* chip specific idx2s array */
+};
+
+struct icst_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
+struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
+
+/*
+ * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST307_VCO_MIN	6000000
+#define ICST307_VCO_MAX	200000000
+
+extern const unsigned char icst307_s2div[];
+extern const unsigned char icst307_idx2s[];
+
+/*
+ * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST525_VCO_MIN		10000000
+#define ICST525_VCO_MAX_3V	200000000
+#define ICST525_VCO_MAX_5V	320000000
+
+extern const unsigned char icst525_s2div[];
+extern const unsigned char icst525_idx2s[];
+
+#endif
diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
deleted file mode 100644
index 554f128..0000000
--- a/arch/arm/include/asm/hardware/icst307.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst307.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICS307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This file is similar to the icst525.h file
- */
-#ifndef ASMARM_HARDWARE_ICST307_H
-#define ASMARM_HARDWARE_ICST307_H
-
-struct icst307_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst307_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
-struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
-struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
-
-#endif
diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
deleted file mode 100644
index 58f0dc4..0000000
--- a/arch/arm/include/asm/hardware/icst525.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst525.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST525_H
-#define ASMARM_HARDWARE_ICST525_H
-
-struct icst525_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst525_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
-struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
-struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
-
-#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index 1a8c727..9b28f12 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -366,8 +366,7 @@ static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
 		slot_cnt += *slots_per_op;
 	}
 
-	if (len)
-		slot_cnt += *slots_per_op;
+	slot_cnt += *slots_per_op;
 
 	return slot_cnt;
 }
@@ -389,8 +388,7 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
 		slot_cnt += *slots_per_op;
 	}
 
-	if (len)
-		slot_cnt += *slots_per_op;
+	slot_cnt += *slots_per_op;
 
 	return slot_cnt;
 }
@@ -737,10 +735,8 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
 			i += slots_per_op;
 		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
 
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iter->byte_count = len;
 	}
 }
 
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff..6700c7f 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,6 +75,18 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
 /* frequently used interrupts */
 #define IT8152_PCISERR		IT8152_PD_IRQ(14)
 #define IT8152_H2PTADR		IT8152_PD_IRQ(13)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 954b1be..74e51d6b 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -214,4 +214,8 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 /* Frontlight control */
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
 
+struct locomo_platform_data {
+	int	irq_base;	/* IRQ base for cascaded on-chip IRQs */
+};
+
 #endif
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
new file mode 100644
index 0000000..575fa81
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -0,0 +1,217 @@
+/* linux/include/asm/hardware/pl330.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PL330_CORE_H
+#define __PL330_CORE_H
+
+#define PL330_MAX_CHAN		8
+#define PL330_MAX_IRQS		32
+#define PL330_MAX_PERI		32
+
+enum pl330_srccachectrl {
+	SCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	SCCTRL1, /* Bufferable only */
+	SCCTRL2, /* Cacheable, but do not allocate */
+	SCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	SINVALID1,
+	SINVALID2,
+	SCCTRL6, /* Cacheable write-through, allocate on reads only */
+	SCCTRL7, /* Cacheable write-back, allocate on reads only */
+};
+
+enum pl330_dstcachectrl {
+	DCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	DCCTRL1, /* Bufferable only */
+	DCCTRL2, /* Cacheable, but do not allocate */
+	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	DINVALID1 = 8,
+	DINVALID2,
+	DCCTRL6, /* Cacheable write-through, allocate on writes only */
+	DCCTRL7, /* Cacheable write-back, allocate on writes only */
+};
+
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+	u32	periph_id;
+	u32	pcell_id;
+#define DMAC_MODE_NS	(1 << 0)
+	unsigned int	mode;
+	unsigned int	data_bus_width:10; /* In number of bits */
+	unsigned int	data_buf_dep:10;
+	unsigned int	num_chan:4;
+	unsigned int	num_peri:6;
+	u32		peri_ns;
+	unsigned int	num_events:6;
+	u32		irq_ns;
+};
+
+/* Handle to the DMAC provided to the PL330 core */
+struct pl330_info {
+	/* Owning device */
+	struct device *dev;
+	/* Size of MicroCode buffers for each channel. */
+	unsigned mcbufsz;
+	/* ioremap'ed address of PL330 registers. */
+	void __iomem	*base;
+	/* Client can freely use it. */
+	void	*client_data;
+	/* PL330 core data, Client must not touch it. */
+	void	*pl330_data;
+	/* Populated by the PL330 core driver during pl330_add */
+	struct pl330_config	pcfg;
+	/*
+	 * If the DMAC has some reset mechanism, then the
+	 * client may want to provide pointer to the method.
+	 */
+	void (*dmac_reset)(struct pl330_info *pi);
+};
+
+enum pl330_byteswap {
+	SWAP_NO = 0,
+	SWAP_2,
+	SWAP_4,
+	SWAP_8,
+	SWAP_16,
+};
+
+/**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+	/* Address Incrementing */
+	unsigned dst_inc:1;
+	unsigned src_inc:1;
+
+	/*
+	 * For now, the SRC & DST protection levels
+	 * and burst size/length are assumed same.
+	 */
+	bool nonsecure;
+	bool privileged;
+	bool insnaccess;
+	unsigned brst_len:5;
+	unsigned brst_size:3; /* in power of 2 */
+
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+	enum pl330_byteswap swap;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+	u32 src_addr;
+	u32 dst_addr;
+	/* Size to xfer */
+	u32 bytes;
+	/*
+	 * Pointer to next xfer in the list.
+	 * The last xfer in the req must point to NULL.
+	 */
+	struct pl330_xfer *next;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+	/* The all xfers in the request were success. */
+	PL330_ERR_NONE,
+	/* If req aborted due to global error. */
+	PL330_ERR_ABORT,
+	/* If req failed due to problem with Channel. */
+	PL330_ERR_FAIL,
+};
+
+enum pl330_reqtype {
+	MEMTOMEM,
+	MEMTODEV,
+	DEVTOMEM,
+	DEVTODEV,
+};
+
+/* A request defining Scatter-Gather List ending with NULL xfer. */
+struct pl330_req {
+	enum pl330_reqtype rqtype;
+	/* Index of peripheral for the xfer. */
+	unsigned peri:5;
+	/* Unique token for this xfer, set by the client. */
+	void *token;
+	/* Callback to be called after xfer. */
+	void (*xfer_cb)(void *token, enum pl330_op_err err);
+	/* If NULL, req will be done at last set parameters. */
+	struct pl330_reqcfg *cfg;
+	/* Pointer to first xfer in the request. */
+	struct pl330_xfer *x;
+};
+
+/*
+ * To know the status of the channel and DMAC, the client
+ * provides a pointer to this structure. The PL330 core
+ * fills it with current information.
+ */
+struct pl330_chanstatus {
+	/*
+	 * If the DMAC engine halted due to some error,
+	 * the client should remove-add DMAC.
+	 */
+	bool dmac_halted;
+	/*
+	 * If channel is halted due to some error,
+	 * the client should ABORT/FLUSH and START the channel.
+	 */
+	bool faulting;
+	/* Location of last load */
+	u32 src_addr;
+	/* Location of last store */
+	u32 dst_addr;
+	/*
+	 * Pointer to the currently active req, NULL if channel is
+	 * inactive, even though the requests may be present.
+	 */
+	struct pl330_req *top_req;
+	/* Pointer to req waiting second in the queue if any. */
+	struct pl330_req *wait_req;
+};
+
+enum pl330_chan_op {
+	/* Start the channel */
+	PL330_OP_START,
+	/* Abort the active xfer */
+	PL330_OP_ABORT,
+	/* Stop xfer and flush queue */
+	PL330_OP_FLUSH,
+};
+
+extern int pl330_add(struct pl330_info *);
+extern void pl330_del(struct pl330_info *pi);
+extern int pl330_update(const struct pl330_info *pi);
+extern void pl330_release_channel(void *ch_id);
+extern void *pl330_request_channel(const struct pl330_info *pi);
+extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
+extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
+extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
+
+#endif	/* __PL330_CORE_H */
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 5da2595..92ed254 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -578,4 +578,8 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 
+struct sa1111_platform_data {
+	int	irq_base;	/* base for cascaded on-chip IRQs */
+};
+
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
new file mode 100644
index 0000000..a101f10
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/include/asm/hardware/sp810.h
+ *
+ * ARM PrimeXsys System Controller SP810 header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_SP810_H
+#define __ASM_ARM_SP810_H
+
+#include <linux/io.h>
+
+/* sysctl registers offset */
+#define SCCTRL			0x000
+#define SCSYSSTAT		0x004
+#define SCIMCTRL		0x008
+#define SCIMSTAT		0x00C
+#define SCXTALCTRL		0x010
+#define SCPLLCTRL		0x014
+#define SCPLLFCTRL		0x018
+#define SCPERCTRL0		0x01C
+#define SCPERCTRL1		0x020
+#define SCPEREN			0x024
+#define SCPERDIS		0x028
+#define SCPERCLKEN		0x02C
+#define SCPERSTAT		0x030
+#define SCSYSID0		0xEE0
+#define SCSYSID1		0xEE4
+#define SCSYSID2		0xEE8
+#define SCSYSID3		0xEEC
+#define SCITCR			0xF00
+#define SCITIR0			0xF04
+#define SCITIR1			0xF08
+#define SCITOR			0xF0C
+#define SCCNTCTRL		0xF10
+#define SCCNTDATA		0xF14
+#define SCCNTSTEP		0xF18
+#define SCPERIPHID0		0xFE0
+#define SCPERIPHID1		0xFE4
+#define SCPERIPHID2		0xFE8
+#define SCPERIPHID3		0xFEC
+#define SCPCELLID0		0xFF0
+#define SCPCELLID1		0xFF4
+#define SCPCELLID2		0xFF8
+#define SCPCELLID3		0xFFC
+
+static inline void sysctl_soft_reset(void __iomem *base)
+{
+	/* writing any value to SCSYSSTAT reg will reset system */
+	writel(0, base + SCSYSSTAT);
+}
+
+#endif	/* __ASM_ARM_SP810_H */
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 7f36d00..feb988a 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -11,7 +11,11 @@
 
 #define kmap_prot		PAGE_KERNEL
 
-#define flush_cache_kmaps()	flush_cache_all()
+#define flush_cache_kmaps() \
+	do { \
+		if (cache_is_vivt()) \
+			flush_cache_all(); \
+	} while (0)
 
 extern pte_t *pkmap_page_table;
 
@@ -21,11 +25,20 @@ extern void *kmap_high(struct page *page);
 extern void *kmap_high_get(struct page *page);
 extern void kunmap_high(struct page *page);
 
+extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
+extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
+
+/*
+ * The following functions are already defined by <linux/highmem.h>
+ * when CONFIG_HIGHMEM is not set.
+ */
+#ifdef CONFIG_HIGHMEM
 extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page, enum km_type type);
 extern void kunmap_atomic(void *kvaddr, enum km_type type);
 extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
 extern struct page *kmap_atomic_to_page(const void *ptr);
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index d2a59cf..1261b1f9 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
+#include <asm/system.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -69,9 +70,16 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 /*
  * __arm_ioremap takes CPU physical address.
  * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ * The _caller variety takes a __builtin_return_address(0) value for
+ * /proc/vmalloc to use - and should only be used in non-inline functions.
  */
-extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
+	size_t, unsigned int, void *);
+extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
+	void *);
+
+extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
 extern void __iounmap(volatile void __iomem *addr);
 
 /*
@@ -172,25 +180,38 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * IO port primitives for more information.
  */
 #ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+#define readb_relaxed(c) ({ u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
 					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
 					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,__mem_pci(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),__mem_pci(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),__mem_pci(c)))
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 #define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
 #define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
 #define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
 #define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
 #define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
 #define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
@@ -237,13 +258,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * io{read,write}{8,16,32} macros
  */
 #ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
index a91d8a1..7f0b6d1 100644
--- a/arch/arm/include/asm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
@@ -53,6 +53,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 328f14a..237282f 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 struct irqaction;
+struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index c019949..e51b1e8 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -18,7 +18,9 @@ enum km_type {
 	KM_IRQ1,
 	KM_SOFTIRQ0,
 	KM_SOFTIRQ1,
+	KM_L1_CACHE,
 	KM_L2_CACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index a38bdc7..52f0da1 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -8,10 +8,16 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef __ASM_MACH_PCI_H
+#define __ASM_MACH_PCI_H
+
 struct pci_sys_data;
 struct pci_bus;
 
 struct hw_pci {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head buses;
 	int		nr_controllers;
 	int		(*setup)(int nr, struct pci_sys_data *);
@@ -26,6 +32,9 @@ struct hw_pci {
  * Per-controller structure
  */
 struct pci_sys_data {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head node;
 	int		busnr;		/* primary bus number			*/
 	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
@@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
 extern void pci_v3_preinit(void);
 extern void pci_v3_postinit(void);
+
+#endif /* __ASM_MACH_PCI_H */
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index b2cc1fc..35d408f 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -38,7 +38,7 @@ struct sys_timer {
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	unsigned long		(*offset)(void);
 #endif
 };
@@ -46,12 +46,4 @@ struct sys_timer {
 extern struct sys_timer *system_timer;
 extern void timer_tick(void);
 
-/*
- * Kernel time keeping support.
- */
-struct timespec;
-extern int (*set_rtc)(void);
-extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
-extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
-
 #endif
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index f3eabf1..833306e 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info {
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
+	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
-	u16	gpio_pullup;			/* high == pullup activated */
+	int	gpio_pullup;			/* high == pullup activated */
 };
 
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 5421d82..4312ee5 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -76,6 +76,17 @@
  */
 #define IOREMAP_MAX_ORDER	24
 
+/*
+ * Size of DMA-consistent memory region.  Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE 	SZ_2M
+#endif
+
+#define CONSISTENT_END		(0xffe00000UL)
+#define CONSISTENT_BASE		(CONSISTENT_END - CONSISTENT_DMA_SIZE)
+
 #else /* CONFIG_MMU */
 
 /*
@@ -93,11 +104,11 @@
 #endif
 
 #ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
+#define PHYS_OFFSET 		UL(CONFIG_DRAM_BASE)
 #endif
 
 #ifndef END_MEM
-#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
 #ifndef PAGE_OFFSET
@@ -113,14 +124,6 @@
 #endif /* !CONFIG_MMU */
 
 /*
- * Size of DMA-consistent memory region.  Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
-/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index b561584..68870c7 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -6,6 +6,7 @@
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 	unsigned int id;
+	spinlock_t id_lock;
 #endif
 	unsigned int kvm_seq;
 } mm_context_t;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index de6cefb..a0b3cac 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -43,12 +43,23 @@ void __check_kvm_seq(struct mm_struct *mm);
 #define ASID_FIRST_VERSION	(1 << ASID_BITS)
 
 extern unsigned int cpu_last_asid;
+#ifdef CONFIG_SMP
+DECLARE_PER_CPU(struct mm_struct *, current_mm);
+#endif
 
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void __new_context(struct mm_struct *mm);
 
 static inline void check_context(struct mm_struct *mm)
 {
+	/*
+	 * This code is executed with interrupts enabled. Therefore,
+	 * mm->context.id cannot be updated to the latest ASID version
+	 * on a different CPU (and condition below not triggered)
+	 * without first getting an IPI to reset the context. The
+	 * alternative is to take a read_lock on mm->context.id_lock
+	 * (after changing its type to rwlock_t).
+	 */
 	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
 		__new_context(mm);
 
@@ -108,6 +119,10 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		__flush_icache_all();
 #endif
 	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
+#ifdef CONFIG_SMP
+		struct mm_struct **crt_mm = &per_cpu(current_mm, cpu);
+		*crt_mm = next;
+#endif
 		check_context(next);
 		cpu_switch_mm(next->pgd, next);
 		if (cache_is_vivt())
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
new file mode 100644
index 0000000..25f76ba
--- /dev/null
+++ b/arch/arm/include/asm/outercache.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+	if (outer_cache.sync)
+		outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif	/* __ASM_OUTERCACHE_H */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 3a32af4..a485ac3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -117,11 +117,12 @@
 #endif
 
 struct page;
+struct vm_area_struct;
 
 struct cpu_user_fns {
 	void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
 	void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
-			unsigned long vaddr);
+			unsigned long vaddr, struct vm_area_struct *vma);
 };
 
 #ifdef MULTI_USER
@@ -137,7 +138,7 @@ extern struct cpu_user_fns cpu_user;
 
 extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
 extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr);
+			unsigned long vaddr, struct vm_area_struct *vma);
 #endif
 
 #define clear_user_highpage(page,vaddr)		\
@@ -145,7 +146,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
 #define copy_user_highpage(to,from,vaddr,vma)	\
-	__cpu_copy_user_highpage(to, from, vaddr)
+	__cpu_copy_user_highpage(to, from, vaddr, vma)
 
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 226cddd..92e2a83 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -4,8 +4,23 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
+#include <asm/mach/pci.h> /* for pci_sys_data */
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
+#ifdef CONFIG_PCI_DOMAINS
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_sys_data *root = bus->sysdata;
+
+	return root->domain;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices
@@ -30,17 +45,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
-/*
- * Whether pci_unmap_{single,page} is a nop depends upon the
- * configuration.
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
new file mode 100644
index 0000000..48837e6
--- /dev/null
+++ b/arch/arm/include/asm/perf_event.h
@@ -0,0 +1,48 @@
+/*
+ *  linux/arch/arm/include/asm/perf_event.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PERF_EVENT_H__
+#define __ARM_PERF_EVENT_H__
+
+/*
+ * NOP: on *most* (read: all supported) ARM platforms, the performance
+ * counter interrupts are regular interrupts and not an NMI. This
+ * means that when we receive the interrupt we can call
+ * perf_event_do_pending() that handles all of the work with
+ * interrupts enabled.
+ */
+static inline void
+set_perf_event_pending(void)
+{
+}
+
+/* ARM performance counters start from 1 (in the cp15 accesses) so use the
+ * same indexes here for consistency. */
+#define PERF_EVENT_INDEX_OFFSET 1
+
+/* ARM perf PMU IDs for use by internal perf clients. */
+enum arm_perf_pmu_ids {
+	ARM_PERF_PMU_ID_XSCALE1	= 0,
+	ARM_PERF_PMU_ID_XSCALE2,
+	ARM_PERF_PMU_ID_V6,
+	ARM_PERF_PMU_ID_V6MP,
+	ARM_PERF_PMU_ID_CA8,
+	ARM_PERF_PMU_ID_CA9,
+	ARM_NUM_PMU_IDS,
+};
+
+extern enum arm_perf_pmu_ids
+armpmu_get_pmu_id(void);
+
+extern int
+armpmu_get_max_events(void);
+
+#endif /* __ARM_PERF_EVENT_H__ */
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index b011f2e..ffc0e857 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -67,6 +67,7 @@ static inline int pte_file(pte_t pte) { return 0; }
  */
 #define pgprot_noncached(prot)	__pgprot(0)
 #define pgprot_writecombine(prot) __pgprot(0)
+#define pgprot_dmacoherent(prot) __pgprot(0)
 
 
 /*
@@ -86,8 +87,8 @@ extern unsigned int kobjsize(const void *objp);
  * All 32bit addresses are effectively valid for vmalloc...
  * Sort of meaningless for non-VM targets.
  */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
+#define	VMALLOC_START	0UL
+#define	VMALLOC_END	0xffffffffUL
 
 #define FIRST_USER_ADDRESS      (0)
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1139768..ab68cf1 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
-#if __LINUX_ARM_ARCH__ >= 7
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
 #else
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
new file mode 100644
index 0000000..8ccea01
--- /dev/null
+++ b/arch/arm/include/asm/pmu.h
@@ -0,0 +1,77 @@
+/*
+ *  linux/arch/arm/include/asm/pmu.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PMU_H__
+#define __ARM_PMU_H__
+
+enum arm_pmu_type {
+	ARM_PMU_DEVICE_CPU	= 0,
+	ARM_NUM_PMU_DEVICES,
+};
+
+#ifdef CONFIG_CPU_HAS_PMU
+
+/**
+ * reserve_pmu() - reserve the hardware performance counters
+ *
+ * Reserve the hardware performance counters in the system for exclusive use.
+ * The platform_device for the system is returned on success, ERR_PTR()
+ * encoded error on failure.
+ */
+extern struct platform_device *
+reserve_pmu(enum arm_pmu_type device);
+
+/**
+ * release_pmu() - Relinquish control of the performance counters
+ *
+ * Release the performance counters and allow someone else to use them.
+ * Callers must have disabled the counters and released IRQs before calling
+ * this. The platform_device returned from reserve_pmu() must be passed as
+ * a cookie.
+ */
+extern int
+release_pmu(struct platform_device *pdev);
+
+/**
+ * init_pmu() - Initialise the PMU.
+ *
+ * Initialise the system ready for PMU enabling. This should typically set the
+ * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
+ * the actual hardware initialisation.
+ */
+extern int
+init_pmu(enum arm_pmu_type device);
+
+#else /* CONFIG_CPU_HAS_PMU */
+
+#include <linux/err.h>
+
+static inline struct platform_device *
+reserve_pmu(enum arm_pmu_type device)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int
+release_pmu(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+
+static inline int
+init_pmu(enum arm_pmu_type device)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_CPU_HAS_PMU */
+
+#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 6a89567..7bed3da 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -91,7 +91,11 @@ extern void release_thread(struct task_struct *);
 
 unsigned long get_wchan(struct task_struct *p);
 
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax()			smp_mb()
+#else
 #define cpu_relax()			barrier()
+#endif
 
 /*
  * Create a new kernel thread
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index eec6e89..9dcb11e 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -128,6 +128,8 @@ struct pt_regs {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
 
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index ca0a37d..2f87870 100644
--- a/arch/arm/include/asm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
@@ -3,25 +3,6 @@
 
 #include <asm/memory.h>
 #include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* buffer offset		 */
-	dma_addr_t	dma_address;	/* dma address			 */
-	unsigned int	length;		/* length			 */
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 5ccce0a..f392fb4 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -223,18 +223,6 @@ extern struct meminfo meminfo;
 #define bank_phys_end(bank)	((bank)->start + (bank)->size)
 #define bank_phys_size(bank)	(bank)->size
 
-/*
- * Early command line parameters.
- */
-struct early_params {
-	const char *arg;
-	void (*fn)(char **p);
-};
-
-#define __early_param(name,fn)					\
-static struct early_params __early_##fn __used			\
-__attribute__((__section__(".early_param.init"))) = { name, fn }
-
 #endif  /*  __KERNEL__  */
 
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index e0d763b..3d05190 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -82,7 +82,7 @@ struct secondary_data {
 extern struct secondary_data secondary_data;
 
 extern int __cpu_disable(void);
-extern int mach_cpu_disable(unsigned int cpu);
+extern int platform_cpu_disable(unsigned int cpu);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index 59303e2..e621530 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -13,4 +13,9 @@ static inline int tlb_ops_need_broadcast(void)
 	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
 }
 
+static inline int cache_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
+}
+
 #endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index 7be0978..634f357 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -1,6 +1,23 @@
 #ifndef __ASMARM_SMP_TWD_H
 #define __ASMARM_SMP_TWD_H
 
+#define TWD_TIMER_LOAD			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
 struct clock_event_device;
 
 extern void __iomem *twd_base;
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index c91c64c..17eb355 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -5,6 +5,22 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
+static inline void dsb_sev(void)
+{
+#if __LINUX_ARM_ARCH__ >= 7
+	__asm__ __volatile__ (
+		"dsb\n"
+		"sev"
+	);
+#elif defined(CONFIG_CPU_32v6K)
+	__asm__ __volatile__ (
+		"mcr p15, 0, %0, c7, c10, 4\n"
+		"sev"
+		: : "r" (0)
+	);
+#endif
+}
+
 /*
  * ARMv6 Spin-locking.
  *
@@ -69,13 +85,11 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 
 	__asm__ __volatile__(
 "	str	%1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
-"	sev"
-#endif
 	:
 	: "r" (&lock->lock), "r" (0)
 	: "cc");
+
+	dsb_sev();
 }
 
 /*
@@ -132,13 +146,11 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 
 	__asm__ __volatile__(
 	"str	%1, [%0]\n"
-#ifdef CONFIG_CPU_32v6K
-"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
-"	sev\n"
-#endif
 	:
 	: "r" (&rw->lock), "r" (0)
 	: "cc");
+
+	dsb_sev();
 }
 
 /* write_can_lock - would write_trylock() succeed? */
@@ -188,14 +200,12 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 "	strex	%1, %0, [%2]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-#ifdef CONFIG_CPU_32v6K
-"\n	cmp	%0, #0\n"
-"	mcreq   p15, 0, %0, c7, c10, 4\n"
-"	seveq"
-#endif
 	: "=&r" (tmp), "=&r" (tmp2)
 	: "r" (&rw->lock)
 	: "cc");
+
+	if (tmp == 0)
+		dsb_sev();
 }
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 058e7e9..5f4f480 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -60,6 +60,8 @@
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 
+#include <asm/outercache.h>
+
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -73,8 +75,7 @@ extern unsigned int mem_fclk_21285;
 
 struct pt_regs;
 
-void die(const char *msg, struct pt_regs *regs, int err)
-		__attribute__((noreturn));
+void die(const char *msg, struct pt_regs *regs, int err);
 
 struct siginfo;
 void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
@@ -138,10 +139,12 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb()		dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
+#define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
-#define wmb()		dmb()
+#define wmb()		mb()
 #else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@@ -153,9 +156,9 @@ extern unsigned int user_debug;
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
 #endif
 
 #define read_barrier_depends()		do { } while(0)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 2dfb7d7..763e29f 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -115,7 +115,8 @@ extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
-extern void vfp_sync_state(struct thread_info *thread);
+extern void vfp_sync_hwstate(struct thread_info *);
+extern void vfp_flush_hwstate(struct thread_info *);
 
 #endif
 
@@ -140,7 +141,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_SYSCALL_TRACE	8
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
 
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c2f1605..bd863d8 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -46,6 +46,9 @@
 #define TLB_V7_UIS_FULL (1 << 20)
 #define TLB_V7_UIS_ASID (1 << 21)
 
+/* Inner Shareable BTB operation (ARMv7 MP extensions) */
+#define TLB_V7_IS_BTB	(1 << 22)
+
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
 #define TLB_DCLEAN	(1 << 30)
 #define TLB_WB		(1 << 31)
@@ -183,7 +186,7 @@
 #endif
 
 #ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
 			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
 #else
 #define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
@@ -339,6 +342,12 @@ static inline void local_flush_tlb_all(void)
 		dsb();
 		isb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -376,6 +385,12 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void
@@ -416,6 +431,12 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
 		dsb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -454,6 +475,12 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 		dsb();
 		isb();
 	}
+	if (tlb_flag(TLB_V7_IS_BTB)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 /*
@@ -529,7 +556,8 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
  * cache entries for the kernels virtual memory range are written
  * back to the page.
  */
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+	pte_t *ptep);
 
 #endif
 
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 1d6bd40..33e4a48 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -229,16 +229,16 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	ldrbt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	mov	%1, #0\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "=&r" (x)					\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
@@ -265,16 +265,16 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	ldrt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	mov	%1, #0\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "=&r" (x)					\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
@@ -310,15 +310,15 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	strbt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err)						\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
@@ -343,15 +343,15 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	strt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err)						\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
@@ -371,16 +371,16 @@ do {									\
  THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
  THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"4:	mov	%0, %3\n"				\
 	"	b	3b\n"					\
-	"	.previous\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.popsection\n"					\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 4b\n"				\
 	"	.long	2b, 4b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "+r" (__pu_addr)				\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index bf65e9f..47f023a 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -59,23 +59,22 @@ struct iwmmxt_sigframe {
 #endif /* CONFIG_IWMMXT */
 
 #ifdef CONFIG_VFP
-#if __LINUX_ARM_ARCH__ < 6
-/* For ARM pre-v6, we use fstmiax and fldmiax.  This adds one extra
- * word after the registers, and a word of padding at the end for
- * alignment.  */
 #define VFP_MAGIC		0x56465001
-#define VFP_STORAGE_SIZE	152
-#else
-#define VFP_MAGIC		0x56465002
-#define VFP_STORAGE_SIZE	144
-#endif
 
 struct vfp_sigframe
 {
 	unsigned long		magic;
 	unsigned long		size;
-	union vfp_state		storage;
-};
+	struct user_vfp		ufp;
+	struct user_vfp_exc	ufp_exc;
+} __attribute__((__aligned__(8)));
+
+/*
+ *  8 byte for magic and size, 264 byte for ufp, 12 bytes for ufp_exc,
+ *  4 bytes padding.
+ */
+#define VFP_STORAGE_SIZE	sizeof(struct vfp_sigframe)
+
 #endif /* CONFIG_VFP */
 
 /*
@@ -91,7 +90,7 @@ struct aux_sigframe {
 #ifdef CONFIG_IWMMXT
 	struct iwmmxt_sigframe	iwmmxt;
 #endif
-#if 0 && defined CONFIG_VFP /* Not yet saved.  */
+#ifdef CONFIG_VFP
 	struct vfp_sigframe	vfp;
 #endif
 	/* Something that isn't a valid magic number for any coprocessor.  */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index cf9cdaa..dd2bf53 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -443,9 +443,12 @@
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index df95e05..05ac4b0 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -83,11 +83,21 @@ struct user{
 
 /*
  * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
- * are ignored by the ptrace system call.
+ * are ignored by the ptrace system call and the signal handler.
  */
 struct user_vfp {
 	unsigned long long fpregs[32];
 	unsigned long fpscr;
 };
 
+/*
+ * VFP exception registers exposed to user space during signal delivery.
+ * Fields not relavant to the current VFP architecture are ignored.
+ */
+struct user_vfp_exc {
+	unsigned long	fpexc;
+	unsigned long	fpinst;
+	unsigned long	fpinst2;
+};
+
 #endif /* _ARM_USER_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index dd00f74..26d302c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,7 @@ obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
@@ -46,6 +47,8 @@ obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 4a88125..8835115 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
  */
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/dma-mapping.h>
 #include <asm/mach/arch.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
@@ -112,5 +113,9 @@ int main(void)
 #ifdef MULTI_PABORT
   DEFINE(PROCESSOR_PABT_FUNC,	offsetof(struct processor, _prefetch_abort));
 #endif
+  BLANK();
+  DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
+  DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
+  DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
   return 0; 
 }
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 8096819..c6273a3 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -527,6 +527,9 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 		if (!sys)
 			panic("PCI: unable to allocate sys data!");
 
+#ifdef CONFIG_PCI_DOMAINS
+		sys->domain  = hw->domain;
+#endif
 		sys->hw      = hw;
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
@@ -616,15 +619,17 @@ char * __init pcibios_setup(char *str)
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
 	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO && start & 0x300)
 		start = (start + 0x3ff) & ~0x3ff;
 
-	res->start = (start + align - 1) & ~(align - 1);
+	start = (start + align - 1) & ~(align - 1);
+
+	return start;
 }
 
 /**
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9314a2d..37ae301 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -91,7 +91,7 @@
 		CALL(sys_settimeofday)
 /* 80 */	CALL(sys_getgroups16)
 		CALL(sys_setgroups16)
-		CALL(OBSOLETE(old_select))	/* used by libc4 */
+		CALL(OBSOLETE(sys_old_select))	/* used by libc4 */
 		CALL(sys_symlink)
 		CALL(sys_ni_syscall)		/* was sys_lstat */
 /* 85 */	CALL(sys_readlink)
@@ -99,7 +99,7 @@
 		CALL(sys_swapon)
 		CALL(sys_reboot)
 		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
-/* 90 */	CALL(OBSOLETE(old_mmap))	/* used by libc4 */
+/* 90 */	CALL(OBSOLETE(sys_old_mmap))	/* used by libc4 */
 		CALL(sys_munmap)
 		CALL(sys_truncate)
 		CALL(sys_ftruncate)
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5c91add..a38b487 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
 
 #if defined(CONFIG_CPU_V6)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -51,7 +51,7 @@
 
 #elif defined(CONFIG_CPU_V7)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -71,7 +71,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #elif defined(CONFIG_CPU_XSCALE)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -98,7 +98,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #else
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -164,7 +164,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3
+		addruart r3, r1
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -180,7 +180,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3
+		addruart r3, r1
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index 7d5b9fb..2c4a185 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -16,6 +16,8 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
 
 #include <asm/dma.h>
 
@@ -264,3 +266,37 @@ int get_dma_residue(unsigned int chan)
 	return ret;
 }
 EXPORT_SYMBOL(get_dma_residue);
+
+#ifdef CONFIG_PROC_FS
+static int proc_dma_show(struct seq_file *m, void *v)
+{
+	int i;
+
+	for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) {
+		dma_t *dma = dma_channel(i);
+		if (dma && dma->lock)
+			seq_printf(m, "%2d: %s\n", i, dma->device_id);
+	}
+	return 0;
+}
+
+static int proc_dma_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_dma_show, NULL);
+}
+
+static const struct file_operations proc_dma_operations = {
+	.open		= proc_dma_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_dma_init(void)
+{
+	proc_create("dma", 0, NULL, &proc_dma_operations);
+	return 0;
+}
+
+__initcall(proc_dma_init);
+#endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 6c5cf36..3fd7861 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -162,8 +162,6 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -204,7 +202,7 @@ __dabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -218,6 +216,9 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -291,7 +292,7 @@ __und_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq
+1:	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -327,7 +328,7 @@ __pabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -393,8 +394,6 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -465,9 +464,6 @@ __irq_usr:
  THUMB(	movne	r0, #0		)
  THUMB(	strne	r0, [r0]	)
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_on
-#endif
 
 	mov	why, #0
 	b	ret_to_user
@@ -523,16 +519,16 @@ ENDPROC(__und_usr)
 /*
  * The out of line fixup for the ldrt above.
  */
-	.section .fixup, "ax"
+	.pushsection .fixup, "ax"
 4:	mov	pc, r9
-	.previous
-	.section __ex_table,"a"
+	.popsection
+	.pushsection __ex_table,"a"
 	.long	1b, 4b
 #if __LINUX_ARM_ARCH__ >= 7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif
-	.previous
+	.popsection
 
 /*
  * Check whether the instruction is a co-processor instruction.
@@ -676,10 +672,10 @@ do_fpe:
  *  lr  = unrecognised FP instruction return address
  */
 
-	.data
+	.pushsection .data
 ENTRY(fp_enter)
 	.word	no_fp
-	.previous
+	.popsection
 
 ENTRY(no_fp)
 	mov	pc, lr
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 7e9ed1e..d93f976 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -102,6 +102,8 @@
 	.else
 	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
 	.endif
+	mov	r0, r0				@ ARMv5T and earlier require a nop
+						@ after ldm {}^
 	add	sp, sp, #S_FRAME_SIZE - S_PC
 	movs	pc, lr				@ return & move spsr_svc into cpsr
 	.endm
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index c638427..0298286 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
 		"    movne  %0, #2    \n"
 		"3:\n"
 
-		".section .fixup, \"ax\"\n"
+		".pushsection .fixup, \"ax\"\n"
 		"4:  mov  %0, #1  \n"
 		"    b    3b      \n"
-		".previous\n"
+		".popsection\n"
 
-		".section __ex_table, \"a\"\n"
+		".pushsection __ex_table, \"a\"\n"
 		"    .long 1b, 4b \n"
 		"    .long 2b, 4b \n"
-		".previous\n"
+		".popsection\n"
 
 		: "=r"(err), "=r"(replaced)
 		: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7cb45b..3b3d2c8 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -27,7 +27,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp.h>
 #include <linux/init.h>
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index ba8ccfe..c868a88 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -9,6 +9,7 @@
  * Authors:  George Davis <davis_g@mvista.com>
  *           Deepak Saxena <dsaxena@plexity.net>
  */
+#include <linux/irq.h>
 #include <linux/kgdb.h>
 #include <asm/traps.h>
 
@@ -97,6 +98,11 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
 	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->ARM_pc = pc;
+}
+
 static int compiled_break;
 
 int kgdb_arch_handle_exception(int exception_vector, int signo,
@@ -158,6 +164,18 @@ static struct undef_hook kgdb_compiled_brkpt_hook = {
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static void kgdb_call_nmi_hook(void *ignored)
+{
+       kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+       local_irq_enable();
+       smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+       local_irq_disable();
+}
+
 /**
  *	kgdb_arch_init - Perform any architecture specific initalization.
  *
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index da1f949..8bccbfa 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -583,13 +583,14 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	union reg_pair fnr;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 	long rdv;
-	long rnv  = regs->uregs[rn];
-	long rmv  = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 60c62c3..2ba7deb 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
@@ -393,6 +394,14 @@ void __kprobes jprobe_return(void)
 		/*
 		 * Setup an empty pt_regs. Fill SP and PC fields as
 		 * they're needed by longjmp_break_handler.
+		 *
+		 * We allocate some slack between the original SP and start of
+		 * our fabricated regs. To be precise we want to have worst case
+		 * covered which is STMFD with all 16 regs so we allocate 2 *
+		 * sizeof(struct_pt_regs)).
+		 *
+		 * This is to prevent any simulated instruction from writing
+		 * over the regs when they are accessing the stack.
 		 */
 		"sub    sp, %0, %1		\n\t"
 		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@@ -410,7 +419,7 @@ void __kprobes jprobe_return(void)
 		"ldmia	sp, {r0 - pc}		\n\t"
 		:
 		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs)),
+		  "I" (sizeof(struct pt_regs) * 2),
 		  "J" (offsetof(struct pt_regs, ARM_sp)),
 		  "J" (offsetof(struct pt_regs, ARM_pc)),
 		  "J" (offsetof(struct pt_regs, ARM_cpsr))
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
new file mode 100644
index 0000000..31a316c
--- /dev/null
+++ b/arch/arm/kernel/leds.c
@@ -0,0 +1,115 @@
+/*
+ * LED support code, ripped out of arch/arm/kernel/time.c
+ *
+ *  Copyright (C) 1994-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/leds.h>
+
+static void dummy_leds_event(led_event_t evt)
+{
+}
+
+void (*leds_event)(led_event_t) = dummy_leds_event;
+
+struct leds_evt_name {
+	const char	name[8];
+	int		on;
+	int		off;
+};
+
+static const struct leds_evt_name evt_names[] = {
+	{ "amber", led_amber_on, led_amber_off },
+	{ "blue",  led_blue_on,  led_blue_off  },
+	{ "green", led_green_on, led_green_off },
+	{ "red",   led_red_on,   led_red_off   },
+};
+
+static ssize_t leds_store(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
+{
+	int ret = -EINVAL, len = strcspn(buf, " ");
+
+	if (len > 0 && buf[len] == '\0')
+		len--;
+
+	if (strncmp(buf, "claim", len) == 0) {
+		leds_event(led_claim);
+		ret = size;
+	} else if (strncmp(buf, "release", len) == 0) {
+		leds_event(led_release);
+		ret = size;
+	} else {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
+			if (strlen(evt_names[i].name) != len ||
+			    strncmp(buf, evt_names[i].name, len) != 0)
+				continue;
+			if (strncmp(buf+len, " on", 3) == 0) {
+				leds_event(evt_names[i].on);
+				ret = size;
+			} else if (strncmp(buf+len, " off", 4) == 0) {
+				leds_event(evt_names[i].off);
+				ret = size;
+			}
+			break;
+		}
+	}
+	return ret;
+}
+
+static SYSDEV_ATTR(event, 0200, NULL, leds_store);
+
+static int leds_suspend(struct sys_device *dev, pm_message_t state)
+{
+	leds_event(led_stop);
+	return 0;
+}
+
+static int leds_resume(struct sys_device *dev)
+{
+	leds_event(led_start);
+	return 0;
+}
+
+static int leds_shutdown(struct sys_device *dev)
+{
+	leds_event(led_halted);
+	return 0;
+}
+
+static struct sysdev_class leds_sysclass = {
+	.name		= "leds",
+	.shutdown	= leds_shutdown,
+	.suspend	= leds_suspend,
+	.resume		= leds_resume,
+};
+
+static struct sys_device leds_device = {
+	.id		= 0,
+	.cls		= &leds_sysclass,
+};
+
+static int __init leds_init(void)
+{
+	int ret;
+	ret = sysdev_class_register(&leds_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&leds_device);
+	if (ret == 0)
+		ret = sysdev_create_file(&leds_device, &attr_event);
+	return ret;
+}
+
+device_initcall(leds_init);
+
+EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index f28c5e9..c628bdf 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -16,9 +16,9 @@
 #include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
-#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
new file mode 100644
index 0000000..de12536
--- /dev/null
+++ b/arch/arm/kernel/perf_event.c
@@ -0,0 +1,3133 @@
+#undef DEBUG
+
+/*
+ * ARM performance counter support.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * This code is based on the sparc64 perf event code, which is in turn based
+ * on the x86 code. Callchain code is based on the ARM OProfile backtrace
+ * code.
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+#include <asm/stacktrace.h>
+
+static struct platform_device *pmu_device;
+
+/*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+DEFINE_SPINLOCK(pmu_lock);
+
+/*
+ * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * another platform that supports more, we need to increase this to be the
+ * largest of all platforms.
+ *
+ * ARMv7 supports up to 32 events:
+ *  cycle counter CCNT + 31 events counters CNT0..30.
+ *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
+ */
+#define ARMPMU_MAX_HWEVENTS		33
+
+/* The events for a given CPU. */
+struct cpu_hw_events {
+	/*
+	 * The events that are active on the CPU for the given index. Index 0
+	 * is reserved.
+	 */
+	struct perf_event	*events[ARMPMU_MAX_HWEVENTS];
+
+	/*
+	 * A 1 bit for an index indicates that the counter is being used for
+	 * an event. A 0 means that the counter can be used.
+	 */
+	unsigned long		used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+
+	/*
+	 * A 1 bit for an index indicates that the counter is actively being
+	 * used.
+	 */
+	unsigned long		active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+/* PMU names. */
+static const char *arm_pmu_names[] = {
+	[ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
+	[ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
+	[ARM_PERF_PMU_ID_V6]	  = "v6",
+	[ARM_PERF_PMU_ID_V6MP]	  = "v6mpcore",
+	[ARM_PERF_PMU_ID_CA8]	  = "ARMv7 Cortex-A8",
+	[ARM_PERF_PMU_ID_CA9]	  = "ARMv7 Cortex-A9",
+};
+
+struct arm_pmu {
+	enum arm_perf_pmu_ids id;
+	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
+	void		(*enable)(struct hw_perf_event *evt, int idx);
+	void		(*disable)(struct hw_perf_event *evt, int idx);
+	int		(*event_map)(int evt);
+	u64		(*raw_event)(u64);
+	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
+					 struct hw_perf_event *hwc);
+	u32		(*read_counter)(int idx);
+	void		(*write_counter)(int idx, u32 val);
+	void		(*start)(void);
+	void		(*stop)(void);
+	int		num_events;
+	u64		max_period;
+};
+
+/* Set at runtime when we know what CPU type we are. */
+static const struct arm_pmu *armpmu;
+
+enum arm_perf_pmu_ids
+armpmu_get_pmu_id(void)
+{
+	int id = -ENODEV;
+
+	if (armpmu != NULL)
+		id = armpmu->id;
+
+	return id;
+}
+EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
+
+int
+armpmu_get_max_events(void)
+{
+	int max_events = 0;
+
+	if (armpmu != NULL)
+		max_events = armpmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(armpmu_get_max_events);
+
+#define HW_OP_UNSUPPORTED		0xFFFF
+
+#define C(_x) \
+	PERF_COUNT_HW_CACHE_##_x
+
+#define CACHE_OP_UNSUPPORTED		0xFFFF
+
+static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+				     [PERF_COUNT_HW_CACHE_OP_MAX]
+				     [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static int
+armpmu_map_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result, ret;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+
+	if (ret == CACHE_OP_UNSUPPORTED)
+		return -ENOENT;
+
+	return ret;
+}
+
+static int
+armpmu_event_set_period(struct perf_event *event,
+			struct hw_perf_event *hwc,
+			int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (left > (s64)armpmu->max_period)
+		left = armpmu->max_period;
+
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static u64
+armpmu_event_update(struct perf_event *event,
+		    struct hw_perf_event *hwc,
+		    int idx)
+{
+	int shift = 64 - 32;
+	s64 prev_raw_count, new_raw_count;
+	u64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = armpmu->read_counter(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void
+armpmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0);
+
+	clear_bit(idx, cpuc->active_mask);
+	armpmu->disable(hwc, idx);
+
+	barrier();
+
+	armpmu_event_update(event, hwc, idx);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static void
+armpmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
+
+	armpmu_event_update(event, hwc, hwc->idx);
+}
+
+static void
+armpmu_unthrottle(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/*
+	 * Set the period again. Some counters can't be stopped, so when we
+	 * were throttled we simply disabled the IRQ source and the counter
+	 * may have been left counting. If we don't do this step then we may
+	 * get an interrupt too soon or *way* too late if the overflow has
+	 * happened since disabling.
+	 */
+	armpmu_event_set_period(event, hwc, hwc->idx);
+	armpmu->enable(hwc, hwc->idx);
+}
+
+static int
+armpmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+	int err = 0;
+
+	/* If we don't have a space for the counter then finish early. */
+	idx = armpmu->get_event_idx(cpuc, hwc);
+	if (idx < 0) {
+		err = idx;
+		goto out;
+	}
+
+	/*
+	 * If there is an event in the counter we are going to use then make
+	 * sure it is disabled.
+	 */
+	event->hw.idx = idx;
+	armpmu->disable(hwc, idx);
+	cpuc->events[idx] = event;
+	set_bit(idx, cpuc->active_mask);
+
+	/* Set the period for the event. */
+	armpmu_event_set_period(event, hwc, idx);
+
+	/* Enable the event. */
+	armpmu->enable(hwc, idx);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+out:
+	return err;
+}
+
+static struct pmu pmu = {
+	.enable	    = armpmu_enable,
+	.disable    = armpmu_disable,
+	.unthrottle = armpmu_unthrottle,
+	.read	    = armpmu_read,
+};
+
+static int
+validate_event(struct cpu_hw_events *cpuc,
+	       struct perf_event *event)
+{
+	struct hw_perf_event fake_event = event->hw;
+
+	if (event->pmu && event->pmu != &pmu)
+		return 0;
+
+	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+}
+
+static int
+validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_pmu;
+
+	memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+	if (!validate_event(&fake_pmu, leader))
+		return -ENOSPC;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_pmu, sibling))
+			return -ENOSPC;
+	}
+
+	if (!validate_event(&fake_pmu, event))
+		return -ENOSPC;
+
+	return 0;
+}
+
+static int
+armpmu_reserve_hardware(void)
+{
+	int i, err = -ENODEV, irq;
+
+	pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
+	if (IS_ERR(pmu_device)) {
+		pr_warning("unable to reserve pmu\n");
+		return PTR_ERR(pmu_device);
+	}
+
+	init_pmu(ARM_PMU_DEVICE_CPU);
+
+	if (pmu_device->num_resources < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < pmu_device->num_resources; ++i) {
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		err = request_irq(irq, armpmu->handle_irq,
+				  IRQF_DISABLED | IRQF_NOBALANCING,
+				  "armpmu", NULL);
+		if (err) {
+			pr_warning("unable to request IRQ%d for ARM perf "
+				"counters\n", irq);
+			break;
+		}
+	}
+
+	if (err) {
+		for (i = i - 1; i >= 0; --i) {
+			irq = platform_get_irq(pmu_device, i);
+			if (irq >= 0)
+				free_irq(irq, NULL);
+		}
+		release_pmu(pmu_device);
+		pmu_device = NULL;
+	}
+
+	return err;
+}
+
+static void
+armpmu_release_hardware(void)
+{
+	int i, irq;
+
+	for (i = pmu_device->num_resources - 1; i >= 0; --i) {
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, NULL);
+	}
+	armpmu->stop();
+
+	release_pmu(pmu_device);
+	pmu_device = NULL;
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+
+static void
+hw_perf_event_destroy(struct perf_event *event)
+{
+	if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
+		armpmu_release_hardware();
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+}
+
+static int
+__hw_perf_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int mapping, err;
+
+	/* Decode the generic type into an ARM event identifier. */
+	if (PERF_TYPE_HARDWARE == event->attr.type) {
+		mapping = armpmu->event_map(event->attr.config);
+	} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
+		mapping = armpmu_map_cache_event(event->attr.config);
+	} else if (PERF_TYPE_RAW == event->attr.type) {
+		mapping = armpmu->raw_event(event->attr.config);
+	} else {
+		pr_debug("event type %x not supported\n", event->attr.type);
+		return -EOPNOTSUPP;
+	}
+
+	if (mapping < 0) {
+		pr_debug("event %x:%llx not supported\n", event->attr.type,
+			 event->attr.config);
+		return mapping;
+	}
+
+	/*
+	 * Check whether we need to exclude the counter from certain modes.
+	 * The ARM performance counters are on all of the time so if someone
+	 * has asked us for some excludes then we have to fail.
+	 */
+	if (event->attr.exclude_kernel || event->attr.exclude_user ||
+	    event->attr.exclude_hv || event->attr.exclude_idle) {
+		pr_debug("ARM performance counters do not support "
+			 "mode exclusion\n");
+		return -EPERM;
+	}
+
+	/*
+	 * We don't assign an index until we actually place the event onto
+	 * hardware. Use -1 to signify that we haven't decided where to put it
+	 * yet. For SMP systems, each core has it's own PMU so we can't do any
+	 * clever allocation or constraints checking at this point.
+	 */
+	hwc->idx = -1;
+
+	/*
+	 * Store the event encoding into the config_base field. config and
+	 * event_base are unused as the only 2 things we need to know are
+	 * the event mapping and the counter to use. The counter to use is
+	 * also the indx and the config_base is the event type.
+	 */
+	hwc->config_base	    = (unsigned long)mapping;
+	hwc->config		    = 0;
+	hwc->event_base		    = 0;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period  = armpmu->max_period;
+		hwc->last_period    = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	err = 0;
+	if (event->group_leader != event) {
+		err = validate_group(event);
+		if (err)
+			return -EINVAL;
+	}
+
+	return err;
+}
+
+const struct pmu *
+hw_perf_event_init(struct perf_event *event)
+{
+	int err = 0;
+
+	if (!armpmu)
+		return ERR_PTR(-ENODEV);
+
+	event->destroy = hw_perf_event_destroy;
+
+	if (!atomic_inc_not_zero(&active_events)) {
+		if (atomic_read(&active_events) > perf_max_events) {
+			atomic_dec(&active_events);
+			return ERR_PTR(-ENOSPC);
+		}
+
+		mutex_lock(&pmu_reserve_mutex);
+		if (atomic_read(&active_events) == 0) {
+			err = armpmu_reserve_hardware();
+		}
+
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+
+	if (err)
+		return ERR_PTR(err);
+
+	err = __hw_perf_event_init(event);
+	if (err)
+		hw_perf_event_destroy(event);
+
+	return err ? ERR_PTR(err) : &pmu;
+}
+
+void
+hw_perf_enable(void)
+{
+	/* Enable all of the perf events on hardware. */
+	int idx;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!armpmu)
+		return;
+
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+
+		if (!event)
+			continue;
+
+		armpmu->enable(&event->hw, idx);
+	}
+
+	armpmu->start();
+}
+
+void
+hw_perf_disable(void)
+{
+	if (armpmu)
+		armpmu->stop();
+}
+
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ *	  effectively stops the counter from counting.
+ *	- disable the counter's interrupt generation (each counter has it's
+ *	  own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ *	- enable the counter's interrupt generation.
+ *	- set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+enum armv6_perf_types {
+	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
+	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
+	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
+	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
+	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
+	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
+	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
+	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
+	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
+	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
+	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
+	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
+	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
+	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
+	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
+	ARMV6_PERFCTR_NOP		    = 0x20,
+};
+
+enum armv6_counters {
+	ARMV6_CYCLE_COUNTER = 1,
+	ARMV6_COUNTER0,
+	ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+enum armv6mpcore_perf_types {
+	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
+	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
+	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
+	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
+	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
+	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
+	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
+	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
+	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
+	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
+	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+	u32 val;
+	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE		(1 << 0)
+#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
+#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
+#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+	 ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+	return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+				  enum armv6_counters counter)
+{
+	int ret = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+	else if (ARMV6_COUNTER0 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+	else if (ARMV6_COUNTER1 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+	unsigned long value = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+		       u32 value)
+{
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+		      int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= 0;
+		evt	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+			  ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+			  ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the event
+	 * that we're interested in.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+		    void *dev)
+{
+	unsigned long pmcr = armv6_pmcr_read();
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!armv6_pmcr_has_overflowed(pmcr))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	/*
+	 * The interrupts are cleared by writing the overflow flags back to
+	 * the control register. All of the other bits don't have any effect
+	 * if they are rewritten, so write the whole value back.
+	 */
+	armv6_pmcr_write(pmcr);
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts enabled. For
+	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * will not work.
+	 */
+	perf_event_do_pending();
+
+	return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val |= ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+void
+armv6pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int
+armv6pmu_event_map(int config)
+{
+	int mapping = armv6_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static inline int
+armv6mpcore_pmu_event_map(int config)
+{
+	int mapping = armv6mpcore_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64
+armv6pmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+		       struct hw_perf_event *event)
+{
+	/* Always place a cycle counter into the cycle counter. */
+	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV6_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * counter0 and counter1.
+		 */
+		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
+			return ARMV6_COUNTER1;
+		}
+
+		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
+			return ARMV6_COUNTER0;
+		}
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+		       int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+		evt	= 0;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the number
+	 * of ETM bus signal assertion cycles. The external reporting should
+	 * be disabled and so this should never increment.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+			      int idx)
+{
+	unsigned long val, mask, flags, evt = 0;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+	 * simply disable the interrupt reporting.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+	.id			= ARM_PERF_PMU_ID_V6,
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6pmu_disable_event,
+	.event_map		= armv6pmu_event_map,
+	.raw_event		= armv6pmu_raw_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+	.id			= ARM_PERF_PMU_ID_V6MP,
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6mpcore_pmu_disable_event,
+	.event_map		= armv6mpcore_pmu_event_map,
+	.raw_event		= armv6pmu_raw_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ *  by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ *  a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ *  a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ *  counter and all 4 performance counters together can be reset separately.
+ */
+
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
+	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
+	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
+	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
+	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
+	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
+	ARMV7_PERFCTR_DREAD			= 0x06,
+	ARMV7_PERFCTR_DWRITE			= 0x07,
+
+	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
+	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
+	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
+	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+	 * It counts:
+	 *  - all branch instructions,
+	 *  - instructions that explicitly write the PC,
+	 *  - exception generating instructions.
+	 */
+	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
+	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
+	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
+	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
+
+	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
+
+	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
+
+	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
+
+	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
+	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
+	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
+	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
+	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
+	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
+	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
+	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
+	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
+	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
+	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
+	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
+	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
+	ARMV7_PERFCTR_L2_NEON			= 0x4E,
+	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
+	ARMV7_PERFCTR_L1_INST			= 0x50,
+	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
+	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
+	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
+	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
+	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
+	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
+	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
+	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
+	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
+	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
+
+	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
+	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
+	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
+	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
+	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
+
+	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
+	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
+
+	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
+	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
+	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
+	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
+	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
+	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
+	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
+	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
+	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
+
+	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
+
+	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
+	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
+	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
+	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
+	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
+
+	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
+	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
+	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
+	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
+	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
+	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES 	= 0x85,
+	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
+
+	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
+	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
+
+	ARMV7_PERFCTR_ISB_INST			= 0x90,
+	ARMV7_PERFCTR_DSB_INST			= 0x91,
+	ARMV7_PERFCTR_DMB_INST			= 0x92,
+	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
+
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
+	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
+	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
+	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
+	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    =
+					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+	ARMV7_CYCLE_COUNTER 		= 1,	/* Cycle counter */
+	ARMV7_COUNTER0			= 2,	/* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
+#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
+#define	ARMV7_PMNC_N_MASK	0x1f
+#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 		0	/* First event counter */
+#define ARMV7_CCNT 		31	/* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
+#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
+#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+	u32 val;
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+	val &= ARMV7_PMNC_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+	return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum armv7_counters counter)
+{
+	int ret;
+
+	if (counter == ARMV7_CYCLE_COUNTER)
+		ret = pmnc & ARMV7_FLAG_C;
+	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+		ret = pmnc & ARMV7_FLAG_P(counter);
+	else
+		pr_err("CPU%u checking wrong counter %d overflow status\n",
+			smp_processor_id(), counter);
+
+	return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+		pr_err("CPU%u selecting wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+	unsigned long value = 0;
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mrc p15, 0, %0, c9, c13, 2"
+				     : "=r" (value));
+	} else
+		pr_err("CPU%u reading wrong counter %d\n",
+			smp_processor_id(), idx);
+
+	return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mcr p15, 0, %0, c9, c13, 2"
+				     : : "r" (value));
+	} else
+		pr_err("CPU%u writing wrong counter %d\n",
+			smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+	if (armv7_pmnc_select_counter(idx) == idx) {
+		val &= ARMV7_EVTSEL_MASK;
+		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+	}
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENS_C;
+	else
+		val = ARMV7_CNTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+	u32 val;
+
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENC_C;
+	else
+		val = ARMV7_CNTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENS_C;
+	else
+		val = ARMV7_INTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENC_C;
+	else
+		val = ARMV7_INTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+	u32 val;
+
+	/* Read */
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+	/* Write to clear flags */
+	val &= ARMV7_FLAG_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+	return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+	u32 val;
+	unsigned int cnt;
+
+	printk(KERN_INFO "PMNC registers dump:\n");
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+	printk(KERN_INFO "PMNC  =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+	printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+	printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+	printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+	printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+	printk(KERN_INFO "CCNT  =0x%08x\n", val);
+
+	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+		armv7_pmnc_select_counter(cnt);
+		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+	}
+}
+#endif
+
+void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Enable counter and interrupt, and set the counter to count
+	 * the event that we're interested in.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Set event (if destined for PMNx counters)
+	 * We don't need to set the event if it's a cycle count
+	 */
+	if (idx != ARMV7_CYCLE_COUNTER)
+		armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+	/*
+	 * Enable interrupt for this counter
+	 */
+	armv7_pmnc_enable_intens(idx);
+
+	/*
+	 * Enable counter
+	 */
+	armv7_pmnc_enable_counter(idx);
+
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Disable counter and interrupt
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Disable interrupt for this counter
+	 */
+	armv7_pmnc_disable_intens(idx);
+
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * Get and reset the IRQ flags
+	 */
+	pmnc = armv7_pmnc_getreset_flags();
+
+	/*
+	 * Did an overflow occur?
+	 */
+	if (!armv7_pmnc_has_overflowed(pmnc))
+		return IRQ_NONE;
+
+	/*
+	 * Handle the counter(s) overflow(s)
+	 */
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts enabled. For
+	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * will not work.
+	 */
+	perf_event_do_pending();
+
+	return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	/* Enable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	/* Disable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int armv7_a8_pmu_event_map(int config)
+{
+	int mapping = armv7_a8_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static inline int armv7_a9_pmu_event_map(int config)
+{
+	int mapping = armv7_a9_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64 armv7pmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+				  struct hw_perf_event *event)
+{
+	int idx;
+
+	/* Always place a cycle counter into the cycle counter. */
+	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV7_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * the events counters
+		 */
+		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+			if (!test_and_set_bit(idx, cpuc->used_mask))
+				return idx;
+		}
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static struct arm_pmu armv7pmu = {
+	.handle_irq		= armv7pmu_handle_irq,
+	.enable			= armv7pmu_enable_event,
+	.disable		= armv7pmu_disable_event,
+	.raw_event		= armv7pmu_raw_event,
+	.read_counter		= armv7pmu_read_counter,
+	.write_counter		= armv7pmu_write_counter,
+	.get_event_idx		= armv7pmu_get_event_idx,
+	.start			= armv7pmu_start,
+	.stop			= armv7pmu_stop,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+	u32 nb_cnt;
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+	/* Read the nb of CNTx counters supported from PMNC */
+	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+	/* Add the CPU cycles counter and return */
+	return nb_cnt + 1;
+}
+
+/*
+ * ARMv5 [xscale] Performance counter handling code.
+ *
+ * Based on xscale OProfile code.
+ *
+ * There are two variants of the xscale PMU that we support:
+ * 	- xscale1pmu: 2 event counters and a cycle counter
+ * 	- xscale2pmu: 4 event counters and a cycle counter
+ * The two variants share event definitions, but have different
+ * PMU structures.
+ */
+
+enum xscale_perf_types {
+	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
+	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
+	XSCALE_PERFCTR_DATA_STALL		= 0x02,
+	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
+	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
+	XSCALE_PERFCTR_BRANCH			= 0x05,
+	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
+	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
+	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
+	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
+	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
+	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
+	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
+	XSCALE_PERFCTR_BCU_FULL			= 0x11,
+	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
+	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
+	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
+	XSCALE_PERFCTR_RMW			= 0x16,
+	/* XSCALE_PERFCTR_CCNT is not hardware defined */
+	XSCALE_PERFCTR_CCNT			= 0xFE,
+	XSCALE_PERFCTR_UNUSED			= 0xFF,
+};
+
+enum xscale_counters {
+	XSCALE_CYCLE_COUNTER	= 1,
+	XSCALE_COUNTER0,
+	XSCALE_COUNTER1,
+	XSCALE_COUNTER2,
+	XSCALE_COUNTER3,
+};
+
+static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					   [PERF_COUNT_HW_CACHE_OP_MAX]
+					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+#define	XSCALE_PMU_ENABLE	0x001
+#define XSCALE_PMN_RESET	0x002
+#define	XSCALE_CCNT_RESET	0x004
+#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
+#define XSCALE_PMU_CNT64	0x008
+
+static inline int
+xscalepmu_event_map(int config)
+{
+	int mapping = xscale_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64
+xscalepmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+#define XSCALE1_OVERFLOWED_MASK	0x700
+#define XSCALE1_CCOUNT_OVERFLOW	0x400
+#define XSCALE1_COUNT0_OVERFLOW	0x100
+#define XSCALE1_COUNT1_OVERFLOW	0x200
+#define XSCALE1_CCOUNT_INT_EN	0x040
+#define XSCALE1_COUNT0_INT_EN	0x010
+#define XSCALE1_COUNT1_INT_EN	0x020
+#define XSCALE1_COUNT0_EVT_SHFT	12
+#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
+#define XSCALE1_COUNT1_EVT_SHFT	20
+#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
+
+static inline u32
+xscale1pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale1pmu_write_pmnc(u32 val)
+{
+	/* upper 4bits and 7, 11 are write-as-0 */
+	val &= 0xffff77f;
+	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static inline int
+xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale1pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * NOTE: there's an A stepping erratum that states if an overflow
+	 *       bit already exists and another occurs, the previous
+	 *       Overflow bit gets cleared. There's no workaround.
+	 *	 Fixed in B stepping or later.
+	 */
+	pmnc = xscale1pmu_read_pmnc();
+
+	/*
+	 * Write the value back to clear the overflow flags. Overflow
+	 * flags remain in pmnc for use below. We also disable the PMU
+	 * while we process the interrupt.
+	 */
+	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	perf_event_do_pending();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = 0;
+		evt = XSCALE1_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
+			XSCALE1_COUNT0_INT_EN;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
+			XSCALE1_COUNT1_INT_EN;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = XSCALE1_CCOUNT_INT_EN;
+		evt = 0;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	if (XSCALE_PERFCTR_CCNT == event->config_base) {
+		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return XSCALE_CYCLE_COUNTER;
+	} else {
+		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
+			return XSCALE_COUNTER1;
+		}
+
+		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
+			return XSCALE_COUNTER0;
+		}
+
+		return -EAGAIN;
+	}
+}
+
+static void
+xscale1pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val |= XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale1pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale1pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale1pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE1,
+	.handle_irq	= xscale1pmu_handle_irq,
+	.enable		= xscale1pmu_enable_event,
+	.disable	= xscale1pmu_disable_event,
+	.event_map	= xscalepmu_event_map,
+	.raw_event	= xscalepmu_raw_event,
+	.read_counter	= xscale1pmu_read_counter,
+	.write_counter	= xscale1pmu_write_counter,
+	.get_event_idx	= xscale1pmu_get_event_idx,
+	.start		= xscale1pmu_start,
+	.stop		= xscale1pmu_stop,
+	.num_events	= 3,
+	.max_period	= (1LLU << 32) - 1,
+};
+
+#define XSCALE2_OVERFLOWED_MASK	0x01f
+#define XSCALE2_CCOUNT_OVERFLOW	0x001
+#define XSCALE2_COUNT0_OVERFLOW	0x002
+#define XSCALE2_COUNT1_OVERFLOW	0x004
+#define XSCALE2_COUNT2_OVERFLOW	0x008
+#define XSCALE2_COUNT3_OVERFLOW	0x010
+#define XSCALE2_CCOUNT_INT_EN	0x001
+#define XSCALE2_COUNT0_INT_EN	0x002
+#define XSCALE2_COUNT1_INT_EN	0x004
+#define XSCALE2_COUNT2_INT_EN	0x008
+#define XSCALE2_COUNT3_INT_EN	0x010
+#define XSCALE2_COUNT0_EVT_SHFT	0
+#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
+#define XSCALE2_COUNT1_EVT_SHFT	8
+#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
+#define XSCALE2_COUNT2_EVT_SHFT	16
+#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
+#define XSCALE2_COUNT3_EVT_SHFT	24
+#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
+
+static inline u32
+xscale2pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
+	/* bits 1-2 and 4-23 are read-unpredictable */
+	return val & 0xff000009;
+}
+
+static inline void
+xscale2pmu_write_pmnc(u32 val)
+{
+	/* bits 4-23 are write-as-0, 24-31 are write ignored */
+	val &= 0xf;
+	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_overflow_flags(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_overflow_flags(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_event_select(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_event_select(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
+}
+
+static inline u32
+xscale2pmu_read_int_enable(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
+	return val;
+}
+
+static void
+xscale2pmu_write_int_enable(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline int
+xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
+		break;
+	case XSCALE_COUNTER2:
+		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
+		break;
+	case XSCALE_COUNTER3:
+		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale2pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc, of_flags;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/* Disable the PMU. */
+	pmnc = xscale2pmu_read_pmnc();
+	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	/* Check the overflow flag register. */
+	of_flags = xscale2pmu_read_overflow_flags();
+	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	/* Clear the overflow bits. */
+	xscale2pmu_write_overflow_flags(of_flags);
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	perf_event_do_pending();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien |= XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien |= XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien |= XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien |= XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien |= XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien &= ~XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien &= ~XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien &= ~XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien &= ~XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	int idx = xscale1pmu_get_event_idx(cpuc, event);
+	if (idx >= 0)
+		goto out;
+
+	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
+		idx = XSCALE_COUNTER3;
+	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
+		idx = XSCALE_COUNTER2;
+out:
+	return idx;
+}
+
+static void
+xscale2pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
+	val |= XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale2pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale2pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale2pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE2,
+	.handle_irq	= xscale2pmu_handle_irq,
+	.enable		= xscale2pmu_enable_event,
+	.disable	= xscale2pmu_disable_event,
+	.event_map	= xscalepmu_event_map,
+	.raw_event	= xscalepmu_raw_event,
+	.read_counter	= xscale2pmu_read_counter,
+	.write_counter	= xscale2pmu_write_counter,
+	.get_event_idx	= xscale2pmu_get_event_idx,
+	.start		= xscale2pmu_start,
+	.stop		= xscale2pmu_stop,
+	.num_events	= 5,
+	.max_period	= (1LLU << 32) - 1,
+};
+
+static int __init
+init_hw_perf_events(void)
+{
+	unsigned long cpuid = read_cpuid_id();
+	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+	unsigned long part_number = (cpuid & 0xFFF0);
+
+	/* ARM Ltd CPUs. */
+	if (0x41 == implementor) {
+		switch (part_number) {
+		case 0xB360:	/* ARM1136 */
+		case 0xB560:	/* ARM1156 */
+		case 0xB760:	/* ARM1176 */
+			armpmu = &armv6pmu;
+			memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
+					sizeof(armv6_perf_cache_map));
+			perf_max_events	= armv6pmu.num_events;
+			break;
+		case 0xB020:	/* ARM11mpcore */
+			armpmu = &armv6mpcore_pmu;
+			memcpy(armpmu_perf_cache_map,
+			       armv6mpcore_perf_cache_map,
+			       sizeof(armv6mpcore_perf_cache_map));
+			perf_max_events = armv6mpcore_pmu.num_events;
+			break;
+		case 0xC080:	/* Cortex-A8 */
+			armv7pmu.id = ARM_PERF_PMU_ID_CA8;
+			memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
+				sizeof(armv7_a8_perf_cache_map));
+			armv7pmu.event_map = armv7_a8_pmu_event_map;
+			armpmu = &armv7pmu;
+
+			/* Reset PMNC and read the nb of CNTx counters
+			    supported */
+			armv7pmu.num_events = armv7_reset_read_pmnc();
+			perf_max_events = armv7pmu.num_events;
+			break;
+		case 0xC090:	/* Cortex-A9 */
+			armv7pmu.id = ARM_PERF_PMU_ID_CA9;
+			memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
+				sizeof(armv7_a9_perf_cache_map));
+			armv7pmu.event_map = armv7_a9_pmu_event_map;
+			armpmu = &armv7pmu;
+
+			/* Reset PMNC and read the nb of CNTx counters
+			    supported */
+			armv7pmu.num_events = armv7_reset_read_pmnc();
+			perf_max_events = armv7pmu.num_events;
+			break;
+		}
+	/* Intel CPUs [xscale]. */
+	} else if (0x69 == implementor) {
+		part_number = (cpuid >> 13) & 0x7;
+		switch (part_number) {
+		case 1:
+			armpmu = &xscale1pmu;
+			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
+					sizeof(xscale_perf_cache_map));
+			perf_max_events	= xscale1pmu.num_events;
+			break;
+		case 2:
+			armpmu = &xscale2pmu;
+			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
+					sizeof(xscale_perf_cache_map));
+			perf_max_events	= xscale2pmu.num_events;
+			break;
+		}
+	}
+
+	if (armpmu) {
+		pr_info("enabled with %s PMU driver, %d counters available\n",
+				arm_pmu_names[armpmu->id], armpmu->num_events);
+	} else {
+		pr_info("no hardware support available\n");
+		perf_max_events = -1;
+	}
+
+	return 0;
+}
+arch_initcall(init_hw_perf_events);
+
+/*
+ * Callchain handling code.
+ */
+static inline void
+callchain_store(struct perf_callchain_entry *entry,
+		u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct frame_tail {
+	struct frame_tail   *fp;
+	unsigned long	    sp;
+	unsigned long	    lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail *
+user_backtrace(struct frame_tail *tail,
+	       struct perf_callchain_entry *entry)
+{
+	struct frame_tail buftail;
+
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
+		return NULL;
+
+	callchain_store(entry, buftail.lr);
+
+	/*
+	 * Frame pointers should strictly progress back up the stack
+	 * (towards higher addresses).
+	 */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp - 1;
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs,
+		    struct perf_callchain_entry *entry)
+{
+	struct frame_tail *tail;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
+
+	if (!user_mode(regs))
+		regs = task_pt_regs(current);
+
+	tail = (struct frame_tail *)regs->ARM_fp - 1;
+
+	while (tail && !((unsigned long)tail & 0x3))
+		tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int
+callchain_trace(struct stackframe *fr,
+		void *data)
+{
+	struct perf_callchain_entry *entry = data;
+	callchain_store(entry, fr->pc);
+	return 0;
+}
+
+static void
+perf_callchain_kernel(struct pt_regs *regs,
+		      struct perf_callchain_entry *entry)
+{
+	struct stackframe fr;
+
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	fr.fp = regs->ARM_fp;
+	fr.sp = regs->ARM_sp;
+	fr.lr = regs->ARM_lr;
+	fr.pc = regs->ARM_pc;
+	walk_stackframe(&fr, callchain_trace, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs,
+		  struct perf_callchain_entry *entry)
+{
+	int is_user;
+
+	if (!regs)
+		return;
+
+	is_user = user_mode(regs);
+
+	if (!current || !current->pid)
+		return;
+
+	if (is_user && current->state != TASK_RUNNING)
+		return;
+
+	if (!is_user)
+		perf_callchain_kernel(regs, entry);
+
+	if (current->mm)
+		perf_callchain_user(regs, entry);
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+
+struct perf_callchain_entry *
+perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
+
+	entry->nr = 0;
+	perf_do_callchain(regs, entry);
+	return entry;
+}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
new file mode 100644
index 0000000..b8af96e
--- /dev/null
+++ b/arch/arm/kernel/pmu.c
@@ -0,0 +1,142 @@
+/*
+ *  linux/arch/arm/kernel/pmu.c
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *  Copyright (C) 2010 ARM Ltd, Will Deacon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "PMU: " fmt
+
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/pmu.h>
+
+static volatile long pmu_lock;
+
+static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
+
+static int __devinit pmu_device_probe(struct platform_device *pdev)
+{
+
+	if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) {
+		pr_warning("received registration request for unknown "
+				"device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	if (pmu_devices[pdev->id])
+		pr_warning("registering new PMU device type %d overwrites "
+				"previous registration!\n", pdev->id);
+	else
+		pr_info("registered new PMU device of type %d\n",
+				pdev->id);
+
+	pmu_devices[pdev->id] = pdev;
+	return 0;
+}
+
+static struct platform_driver pmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+	},
+	.probe		= pmu_device_probe,
+};
+
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&pmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+struct platform_device *
+reserve_pmu(enum arm_pmu_type device)
+{
+	struct platform_device *pdev;
+
+	if (test_and_set_bit_lock(device, &pmu_lock)) {
+		pdev = ERR_PTR(-EBUSY);
+	} else if (pmu_devices[device] == NULL) {
+		clear_bit_unlock(device, &pmu_lock);
+		pdev = ERR_PTR(-ENODEV);
+	} else {
+		pdev = pmu_devices[device];
+	}
+
+	return pdev;
+}
+EXPORT_SYMBOL_GPL(reserve_pmu);
+
+int
+release_pmu(struct platform_device *pdev)
+{
+	if (WARN_ON(pdev != pmu_devices[pdev->id]))
+		return -EINVAL;
+	clear_bit_unlock(pdev->id, &pmu_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(release_pmu);
+
+static int
+set_irq_affinity(int irq,
+		 unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	int err = irq_set_affinity(irq, cpumask_of(cpu));
+	if (err)
+		pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+			   irq, cpu);
+	return err;
+#else
+	return 0;
+#endif
+}
+
+static int
+init_cpu_pmu(void)
+{
+	int i, err = 0;
+	struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
+
+	if (!pdev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		err = set_irq_affinity(platform_get_irq(pdev, i), i);
+		if (err)
+			break;
+	}
+
+out:
+	return err;
+}
+
+int
+init_pmu(enum arm_pmu_type device)
+{
+	int err = 0;
+
+	switch (device) {
+	case ARM_PMU_DEVICE_CPU:
+		err = init_cpu_pmu();
+		break;
+	default:
+		pr_warning("attempt to initialise unknown device %d\n",
+				device);
+		err = -EINVAL;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index ba2adef..a4a9cc8 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
@@ -352,23 +351,27 @@ EXPORT_SYMBOL(dump_fpu);
 
 /*
  * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function.  r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
  */
 extern void kernel_thread_helper(void);
-asm(	".section .text\n"
+asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
-"	mov	r0, r1\n"
-"	mov	lr, r3\n"
-"	mov	pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+"	bl	trace_hardirqs_on\n"
+#endif
+"	msr	cpsr_c, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
-"	.previous");
+"	.popsection");
 
 #ifdef CONFIG_ARM_UNWIND
 extern void kernel_thread_exit(long code);
-asm(	".section .text\n"
+asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_exit, #function\n"
 "kernel_thread_exit:\n"
@@ -378,7 +381,7 @@ asm(	".section .text\n"
 "	nop\n"
 "	.fnend\n"
 "	.size	kernel_thread_exit, . - kernel_thread_exit\n"
-"	.previous");
+"	.popsection");
 #else
 #define kernel_thread_exit	do_exit
 #endif
@@ -392,11 +395,12 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 	memset(&regs, 0, sizeof(regs));
 
-	regs.ARM_r1 = (unsigned long)arg;
-	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r4 = (unsigned long)arg;
+	regs.ARM_r5 = (unsigned long)fn;
+	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index a2ea385..3f562a7 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -452,12 +452,23 @@ void ptrace_cancel_bpt(struct task_struct *child)
 		clear_breakpoint(child, &child->thread.debug.bp[i]);
 }
 
+void user_disable_single_step(struct task_struct *task)
+{
+	task->ptrace &= ~PT_SINGLESTEP;
+	ptrace_cancel_bpt(task);
+}
+
+void user_enable_single_step(struct task_struct *task)
+{
+	task->ptrace |= PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  */
 void ptrace_disable(struct task_struct *child)
 {
-	single_step_disable(child);
+	user_disable_single_step(child);
 }
 
 /*
@@ -499,10 +510,41 @@ static struct undef_hook thumb_break_hook = {
 	.fn		= break_trap,
 };
 
+static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr)
+{
+	unsigned int instr2;
+	void __user *pc;
+
+	/* Check the second half of the instruction.  */
+	pc = (void __user *)(instruction_pointer(regs) + 2);
+
+	if (processor_mode(regs) == SVC_MODE) {
+		instr2 = *(u16 *) pc;
+	} else {
+		get_user(instr2, (u16 __user *)pc);
+	}
+
+	if (instr2 == 0xa000) {
+		ptrace_break(current, regs);
+		return 0;
+	} else {
+		return 1;
+	}
+}
+
+static struct undef_hook thumb2_break_hook = {
+	.instr_mask	= 0xffff,
+	.instr_val	= 0xf7f0,
+	.cpsr_mask	= PSR_T_BIT,
+	.cpsr_val	= PSR_T_BIT,
+	.fn		= thumb2_break_trap,
+};
+
 static int __init ptrace_break_init(void)
 {
 	register_undef_hook(&arm_break_hook);
 	register_undef_hook(&thumb_break_hook);
+	register_undef_hook(&thumb2_break_hook);
 	return 0;
 }
 
@@ -669,7 +711,7 @@ static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
 	union vfp_state *vfp = &thread->vfpstate;
 	struct user_vfp __user *ufp = data;
 
-	vfp_sync_state(thread);
+	vfp_sync_hwstate(thread);
 
 	/* copy the floating point registers */
 	if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
@@ -692,7 +734,7 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
 	union vfp_state *vfp = &thread->vfpstate;
 	struct user_vfp __user *ufp = data;
 
-	vfp_sync_state(thread);
+	vfp_sync_hwstate(thread);
 
 	/* copy the floating point registers */
 	if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
@@ -703,6 +745,8 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
 	if (get_user(vfp->hard.fpscr, &ufp->fpscr))
 		return -EFAULT;
 
+	vfp_flush_hwstate(thread);
+
 	return 0;
 }
 #endif
@@ -712,77 +756,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		/*
-		 * read word at location "addr" in the child process.
-		 */
-		case PTRACE_PEEKTEXT:
-		case PTRACE_PEEKDATA:
-			ret = generic_ptrace_peekdata(child, addr, data);
-			break;
-
 		case PTRACE_PEEKUSR:
 			ret = ptrace_read_user(child, addr, (unsigned long __user *)data);
 			break;
 
-		/*
-		 * write the word at location addr.
-		 */
-		case PTRACE_POKETEXT:
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR:
 			ret = ptrace_write_user(child, addr, data);
 			break;
 
-		/*
-		 * continue/restart and stop at next (return from) syscall
-		 */
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			single_step_disable(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill.
-		 * perhaps it should be put in the status that it wants to
-		 * exit.
-		 */
-		case PTRACE_KILL:
-			single_step_disable(child);
-			if (child->exit_state != EXIT_ZOMBIE) {
-				child->exit_code = SIGKILL;
-				wake_up_process(child);
-			}
-			ret = 0;
-			break;
-
-		/*
-		 * execute single instruction.
-		 */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			single_step_enable(child);
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		case PTRACE_GETREGS:
 			ret = ptrace_getregs(child, (void __user *)data);
 			break;
diff --git a/arch/arm/kernel/ptrace.h b/arch/arm/kernel/ptrace.h
index def3b61..3926605 100644
--- a/arch/arm/kernel/ptrace.h
+++ b/arch/arm/kernel/ptrace.h
@@ -14,20 +14,6 @@ extern void ptrace_set_bpt(struct task_struct *);
 extern void ptrace_break(struct task_struct *, struct pt_regs *);
 
 /*
- * make sure single-step breakpoint is gone.
- */
-static inline void single_step_disable(struct task_struct *task)
-{
-	task->ptrace &= ~PT_SINGLESTEP;
-	ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_enable(struct task_struct *task)
-{
-	task->ptrace |= PT_SINGLESTEP;
-}
-
-/*
  * Send SIGTRAP if we're single-stepping
  */
 static inline void single_step_trap(struct task_struct *task)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c6c57b6..122d999 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
+#include <linux/proc_fs.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -102,6 +103,7 @@ struct cpu_cache_fns cpu_cache;
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {
@@ -117,7 +119,7 @@ EXPORT_SYMBOL(elf_platform);
 
 static const char *cpu_name;
 static const char *machine_name;
-static char __initdata command_line[COMMAND_LINE_SIZE];
+static char __initdata cmd_line[COMMAND_LINE_SIZE];
 
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
@@ -417,10 +419,11 @@ static int __init arm_add_memory(unsigned long start, unsigned long size)
  * Pick out the memory size.  We look for mem=size@start,
  * where start and size are "size[KkMm]"
  */
-static void __init early_mem(char **p)
+static int __init early_mem(char *p)
 {
 	static int usermem __initdata = 0;
 	unsigned long size, start;
+	char *endp;
 
 	/*
 	 * If the user specifies memory size, we
@@ -433,52 +436,15 @@ static void __init early_mem(char **p)
 	}
 
 	start = PHYS_OFFSET;
-	size  = memparse(*p, p);
-	if (**p == '@')
-		start = memparse(*p + 1, p);
+	size  = memparse(p, &endp);
+	if (*endp == '@')
+		start = memparse(endp + 1, NULL);
 
 	arm_add_memory(start, size);
-}
-__early_param("mem=", early_mem);
 
-/*
- * Initial parsing of the command line.
- */
-static void __init parse_cmdline(char **cmdline_p, char *from)
-{
-	char c = ' ', *to = command_line;
-	int len = 0;
-
-	for (;;) {
-		if (c == ' ') {
-			extern struct early_params __early_begin, __early_end;
-			struct early_params *p;
-
-			for (p = &__early_begin; p < &__early_end; p++) {
-				int arglen = strlen(p->arg);
-
-				if (memcmp(from, p->arg, arglen) == 0) {
-					if (to != command_line)
-						to -= 1;
-					from += arglen;
-					p->fn(&from);
-
-					while (*from != ' ' && *from != '\0')
-						from++;
-					break;
-				}
-			}
-		}
-		c = *from++;
-		if (!c)
-			break;
-		if (COMMAND_LINE_SIZE <= ++len)
-			break;
-		*to++ = c;
-	}
-	*to = '\0';
-	*cmdline_p = command_line;
+	return 0;
 }
+early_param("mem", early_mem);
 
 static void __init
 setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
@@ -627,6 +593,7 @@ static int __init parse_tag_revision(const struct tag *tag)
 
 __tagtable(ATAG_REVISION, parse_tag_revision);
 
+#ifndef CONFIG_CMDLINE_FORCE
 static int __init parse_tag_cmdline(const struct tag *tag)
 {
 	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
@@ -634,6 +601,7 @@ static int __init parse_tag_cmdline(const struct tag *tag)
 }
 
 __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+#endif /* CONFIG_CMDLINE_FORCE */
 
 /*
  * Scan the tag table for this tag, and call its parse function.
@@ -739,9 +707,15 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data   = (unsigned long) _edata;
 	init_mm.brk	   = (unsigned long) _end;
 
-	memcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
-	parse_cmdline(cmdline_p, from);
+	/* parse_early_param needs a boot_command_line */
+	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+	/* populate cmd_line too for later use, preserving boot_command_line */
+	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
 	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
@@ -782,9 +756,21 @@ static int __init topology_init(void)
 
 	return 0;
 }
-
 subsys_initcall(topology_init);
 
+#ifdef CONFIG_HAVE_PROC_CPU
+static int __init proc_cpu_init(void)
+{
+	struct proc_dir_entry *res;
+
+	res = proc_mkdir("cpu", NULL);
+	if (!res)
+		return -ENOMEM;
+	return 0;
+}
+fs_initcall(proc_cpu_init);
+#endif
+
 static const char *hwcap_str[] = {
 	"swp",
 	"half",
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index e7714f3..907d5a6 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/unistd.h>
+#include <asm/vfp.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -175,6 +176,90 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 #endif
 
+#ifdef CONFIG_VFP
+
+static int preserve_vfp_context(struct vfp_sigframe __user *frame)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *h = &thread->vfpstate.hard;
+	const unsigned long magic = VFP_MAGIC;
+	const unsigned long size = VFP_STORAGE_SIZE;
+	int err = 0;
+
+	vfp_sync_hwstate(thread);
+	__put_user_error(magic, &frame->magic, err);
+	__put_user_error(size, &frame->size, err);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
+			      sizeof(h->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
+	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
+	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_vfp_context(struct vfp_sigframe __user *frame)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *h = &thread->vfpstate.hard;
+	unsigned long magic;
+	unsigned long size;
+	unsigned long fpexc;
+	int err = 0;
+
+	__get_user_error(magic, &frame->magic, err);
+	__get_user_error(size, &frame->size, err);
+
+	if (err)
+		return -EFAULT;
+	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
+		return -EINVAL;
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
+				sizeof(h->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	h->fpexc = fpexc;
+
+	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
+	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+
+	if (!err)
+		vfp_flush_hwstate(thread);
+
+	return err ? -EFAULT : 0;
+}
+
+#endif
+
 /*
  * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
  */
@@ -233,8 +318,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 		err |= restore_iwmmxt_context(&aux->iwmmxt);
 #endif
 #ifdef CONFIG_VFP
-//	if (err == 0)
-//		err |= vfp_restore_state(&sf->aux.vfp);
+	if (err == 0)
+		err |= restore_vfp_context(&aux->vfp);
 #endif
 
 	return err;
@@ -348,8 +433,8 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
 		err |= preserve_iwmmxt_context(&aux->iwmmxt);
 #endif
 #ifdef CONFIG_VFP
-//	if (err == 0)
-//		err |= vfp_save_state(&sf->aux.vfp);
+	if (err == 0)
+		err |= preserve_vfp_context(&aux->vfp);
 #endif
 	__put_user_error(0, &aux->end_magic, err);
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 57162af..b8c3d0f 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			return PTR_ERR(idle);
 		}
 		ci->idle = idle;
+	} else {
+		/*
+		 * Since this idle thread is being re-used, call
+		 * init_idle() to reinitialize the thread structure.
+		 */
+		init_idle(idle, cpu);
 	}
 
 	/*
@@ -99,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 	flush_pmd_entry(pmd);
+	outer_clean_range(__pa(pmd), __pa(pmd + 1));
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -106,7 +113,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
 	secondary_data.pgdir = virt_to_phys(pgd);
-	wmb();
+	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
+	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
 
 	/*
 	 * Now bring the CPU into our world.
@@ -160,7 +168,7 @@ int __cpu_disable(void)
 	struct task_struct *p;
 	int ret;
 
-	ret = mach_cpu_disable(cpu);
+	ret = platform_cpu_disable(cpu);
 	if (ret)
 		return ret;
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index ea02a7b..7c5f0c0 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -21,23 +21,6 @@
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 
-#define TWD_TIMER_LOAD 			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
 /* set up by the platform code */
 void __iomem *twd_base;
 
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index ae4027b..c235018 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
@@ -27,135 +26,7 @@
 #include <linux/file.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	int error = -EFAULT;
-	struct mmap_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls.
- */
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second, int third,
-		       void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr, 
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			if (copy_from_user(&tmp,(struct ipc_kludge __user *)ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *)ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *)ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *)third);
-		}
-		case 1: /* Of course, we don't support iBCS2! */
-			return -EINVAL;
-		}
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-#endif
+#include <linux/slab.h>
 
 /* Fork a new task - this creates a new program thread.
  * This is called indirectly via a small wrapper
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index d59a0cd..33ff678 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -346,9 +346,6 @@ asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
 	return sys_oabi_semtimedop(semid, tsops, nsops, NULL);
 }
 
-extern asmlinkage int sys_ipc(uint call, int first, int second, int third,
-			      void __user *ptr, long fifth);
-
 asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
 			    void __user *ptr, long fifth)
 {
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index d38cdf2..38c261f 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -10,11 +10,6 @@
  *
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
- *
- *  1994-07-02  Alan Modra
- *              fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
- *  1998-12-20  Updated NTP code according to technical memorandum Jan '96
- *              "A Kernel Model for Precision Timekeeping" by Dave Mills
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -77,151 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-/*
- * hook for setting the RTC's idea of the current time.
- */
-int (*set_rtc)(void);
-
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
-{
-	return 0;
-}
-#endif
-
-static unsigned long next_rtc_update;
-
-/*
- * If we have an externally synchronized linux clock, then update
- * CMOS clock accordingly every ~11 minutes.  set_rtc() has to be
- * called as close as possible to 500 ms before the new second
- * starts.
- */
-static inline void do_set_rtc(void)
-{
-	if (!ntp_synced() || set_rtc == NULL)
-		return;
-
-	if (next_rtc_update &&
-	    time_before((unsigned long)xtime.tv_sec, next_rtc_update))
-		return;
-
-	if (xtime.tv_nsec < 500000000 - ((unsigned) tick_nsec >> 1) &&
-	    xtime.tv_nsec >= 500000000 + ((unsigned) tick_nsec >> 1))
-		return;
-
-	if (set_rtc())
-		/*
-		 * rtc update failed.  Try again in 60s
-		 */
-		next_rtc_update = xtime.tv_sec + 60;
-	else
-		next_rtc_update = xtime.tv_sec + 660;
-}
-
-#ifdef CONFIG_LEDS
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
-	const char	name[8];
-	int		on;
-	int		off;
-};
-
-static const struct leds_evt_name evt_names[] = {
-	{ "amber", led_amber_on, led_amber_off },
-	{ "blue",  led_blue_on,  led_blue_off  },
-	{ "green", led_green_on, led_green_off },
-	{ "red",   led_red_on,   led_red_off   },
-};
-
-static ssize_t leds_store(struct sys_device *dev,
-			struct sysdev_attribute *attr,
-			const char *buf, size_t size)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
 {
-	int ret = -EINVAL, len = strcspn(buf, " ");
-
-	if (len > 0 && buf[len] == '\0')
-		len--;
-
-	if (strncmp(buf, "claim", len) == 0) {
-		leds_event(led_claim);
-		ret = size;
-	} else if (strncmp(buf, "release", len) == 0) {
-		leds_event(led_release);
-		ret = size;
-	} else {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
-			if (strlen(evt_names[i].name) != len ||
-			    strncmp(buf, evt_names[i].name, len) != 0)
-				continue;
-			if (strncmp(buf+len, " on", 3) == 0) {
-				leds_event(evt_names[i].on);
-				ret = size;
-			} else if (strncmp(buf+len, " off", 4) == 0) {
-				leds_event(evt_names[i].off);
-				ret = size;
-			}
-			break;
-		}
-	}
-	return ret;
-}
-
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-
-static int leds_suspend(struct sys_device *dev, pm_message_t state)
-{
-	leds_event(led_stop);
-	return 0;
-}
-
-static int leds_resume(struct sys_device *dev)
-{
-	leds_event(led_start);
-	return 0;
-}
+	if (system_timer->offset != NULL)
+		return system_timer->offset() * 1000;
 
-static int leds_shutdown(struct sys_device *dev)
-{
-	leds_event(led_halted);
 	return 0;
 }
-
-static struct sysdev_class leds_sysclass = {
-	.name		= "leds",
-	.shutdown	= leds_shutdown,
-	.suspend	= leds_suspend,
-	.resume		= leds_resume,
-};
-
-static struct sys_device leds_device = {
-	.id		= 0,
-	.cls		= &leds_sysclass,
-};
-
-static int __init leds_init(void)
-{
-	int ret;
-	ret = sysdev_class_register(&leds_sysclass);
-	if (ret == 0)
-		ret = sysdev_register(&leds_device);
-	if (ret == 0)
-		ret = sysdev_create_file(&leds_device, &attr_event);
-	return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
@@ -237,96 +96,6 @@ static inline void do_leds(void)
 #define	do_leds()
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = system_timer->offset();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	/* usec may have gone up a lot: be safe */
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * done, and then undo it!
-	 */
-	nsec -= system_timer->offset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
-/**
- * save_time_delta - Save the offset between system time and RTC time
- * @delta: pointer to timespec to store delta
- * @rtc: pointer to timespec for current RTC time
- *
- * Return a delta between the system time and the RTC time, such
- * that system time can be restored later with restore_time_delta()
- */
-void save_time_delta(struct timespec *delta, struct timespec *rtc)
-{
-	set_normalized_timespec(delta,
-				xtime.tv_sec - rtc->tv_sec,
-				xtime.tv_nsec - rtc->tv_nsec);
-}
-EXPORT_SYMBOL(save_time_delta);
-
-/**
- * restore_time_delta - Restore the current system time
- * @delta: delta returned by save_time_delta()
- * @rtc: pointer to timespec for current RTC time
- */
-void restore_time_delta(struct timespec *delta, struct timespec *rtc)
-{
-	struct timespec ts;
-
-	set_normalized_timespec(&ts,
-				delta->tv_sec + rtc->tv_sec,
-				delta->tv_nsec + rtc->tv_nsec);
-
-	do_settimeofday(&ts);
-}
-EXPORT_SYMBOL(restore_time_delta);
 
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
@@ -336,7 +105,6 @@ void timer_tick(void)
 {
 	profile_tick(CPU_PROFILING);
 	do_leds();
-	do_set_rtc();
 	write_seqlock(&xtime_lock);
 	do_timer(1);
 	write_sequnlock(&xtime_lock);
@@ -392,10 +160,6 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
-#ifndef CONFIG_GENERIC_TIME
-	if (system_timer->offset == NULL)
-		system_timer->offset = dummy_gettimeoffset;
-#endif
 	system_timer->init();
 }
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 3f361a7..1621e53 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -12,15 +12,17 @@
  *  'linux/arch/arm/lib/traps.S'.  Mostly a debugging aid, but will probably
  *  kill the offending process.
  */
-#include <linux/module.h>
 #include <linux/signal.h>
-#include <linux/spinlock.h>
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
-#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
 #include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/uaccess.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -224,14 +226,21 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 #define S_SMP ""
 #endif
 
-static void __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
+static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
 {
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
+	int ret;
 
 	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
 	sysfs_printk_last_file();
+
+	/* trap and error numbers are mostly meaningless on ARM */
+	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
+	if (ret == NOTIFY_STOP)
+		return ret;
+
 	print_modules();
 	__show_regs(regs);
 	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
@@ -243,6 +252,8 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 		dump_backtrace(regs, tsk);
 		dump_instr(KERN_EMERG, regs);
 	}
+
+	return ret;
 }
 
 DEFINE_SPINLOCK(die_lock);
@@ -250,16 +261,21 @@ DEFINE_SPINLOCK(die_lock);
 /*
  * This function is protected against re-entrancy.
  */
-NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
+void die(const char *str, struct pt_regs *regs, int err)
 {
 	struct thread_info *thread = current_thread_info();
+	int ret;
 
 	oops_enter();
 
 	spin_lock_irq(&die_lock);
 	console_verbose();
 	bust_spinlocks(1);
-	__die(str, err, thread, regs);
+	ret = __die(str, err, thread, regs);
+
+	if (regs && kexec_should_crash(thread->task))
+		crash_kexec(regs);
+
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
@@ -267,11 +283,10 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
-
 	if (panic_on_oops)
 		panic("Fatal exception");
-
-	do_exit(SIGSEGV);
+	if (ret != NOTIFY_STOP)
+		do_exit(SIGSEGV);
 }
 
 void arm_notify_die(const char *str, struct pt_regs *regs,
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 786ac2b..dd81a91 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -26,6 +26,7 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
  */
 
+#ifndef __CHECKER__
 #if !defined (__ARM_EABI__)
 #warning Your compiler does not have EABI support.
 #warning    ARM unwind is known to compile only with EABI compilers.
@@ -34,6 +35,7 @@
 #warning Your compiler is too buggy; it is known to not compile ARM unwind support.
 #warning    Change compiler or disable ARM_UNWIND option.
 #endif
+#endif /* __CHECKER__ */
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -359,7 +361,9 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 		frame.fp = regs->ARM_fp;
 		frame.sp = regs->ARM_sp;
 		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
+		/* PC might be corrupted, use LR in that case. */
+		frame.pc = kernel_text_address(regs->ARM_pc)
+			 ? regs->ARM_pc : regs->ARM_lr;
 	} else if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_sp;
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4957e13e..b16c079 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -43,10 +43,6 @@ SECTIONS
 
 		INIT_SETUP(16)
 
-		__early_begin = .;
-			*(.early_param.init)
-		__early_end = .;
-
 		INIT_CALLS
 		CON_INITCALL
 		SECURITY_INITCALL
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index aaf7220..a673297 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -110,13 +110,13 @@ no_frame:	ldmfd	sp!, {r4 - r8, pc}
 ENDPROC(__backtrace)
 ENDPROC(c_backtrace)
 		
-		.section __ex_table,"a"
+		.pushsection __ex_table,"a"
 		.align	3
 		.long	1001b, 1006b
 		.long	1002b, 1006b
 		.long	1003b, 1006b
 		.long	1004b, 1006b
-		.previous
+		.popsection
 
 #define instr r4
 #define reg   r5
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 1279abd..14a0d98 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -45,9 +45,10 @@ USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
 ENDPROC(__clear_user)
+ENDPROC(__clear_user_std)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 9001:		ldmfd	sp!, {r0, pc}
-		.previous
+		.popsection
 
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index e4fe124..66a477a 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -90,7 +90,7 @@ ENTRY(__copy_from_user)
 
 ENDPROC(__copy_from_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align 0
 	copy_abort_preamble
 	ldmfd	sp!, {r1, r2}
@@ -100,5 +100,5 @@ ENDPROC(__copy_from_user)
 	bl	__memzero
 	ldr	r0, [sp], #4
 	copy_abort_end
-	.previous
+	.popsection
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 1a71e15..d066df6 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -93,13 +93,14 @@ WEAK(__copy_to_user)
 #include "copy_template.S"
 
 ENDPROC(__copy_to_user)
+ENDPROC(__copy_to_user_std)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align 0
 	copy_abort_preamble
 	ldmfd	sp!, {r1, r2, r3}
 	sub	r0, r0, r1
 	rsb	r0, r0, r2
 	copy_abort_end
-	.previous
+	.popsection
 
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index fd0e9dc..7d08b43 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -68,10 +68,10 @@
  * so properly, we would have to add in whatever registers were loaded before
  * the fault, which, with the current asm above is not predictable.
  */
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
-		ldr	r5, [fp, #4]		@ *err_ptr
+		ldr	r5, [sp, #8*4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
@@ -80,4 +80,4 @@
 		strneb	r0, [r1], #1
 		bne	9002b
 		load_regs
-		.previous
+		.popsection
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index a1814d9..b1631a7 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -64,9 +64,9 @@ __get_user_bad:
 	mov	pc, lr
 ENDPROC(__get_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
 	.long	1b, __get_user_bad
 	.long	2b, __get_user_bad
 	.long	3b, __get_user_bad
 	.long	4b, __get_user_bad
-.previous
+.popsection
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 5025c86..938fc14 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -74,7 +74,7 @@ ENTRY(memmove)
 		rsb	ip, ip, #32
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:		W(nop)
 		W(ldr)	r3, [r1, #-4]!
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
@@ -85,7 +85,7 @@ ENTRY(memmove)
 
 		add	pc, pc, ip
 		nop
-		nop
+		W(nop)
 		W(str)	r3, [r0, #-4]!
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 02fedbf..5a01a23 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -81,11 +81,11 @@ __put_user_bad:
 	mov	pc, lr
 ENDPROC(__put_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
 	.long	1b, __put_user_bad
 	.long	2b, __put_user_bad
 	.long	3b, __put_user_bad
 	.long	4b, __put_user_bad
 	.long	5b, __put_user_bad
 	.long	6b, __put_user_bad
-.previous
+.popsection
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 1c9814f..f202d7b 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user)
 	mov	pc, lr
 ENDPROC(__strncpy_from_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	0
 9001:	mov	r3, #0
 	strb	r3, [r0, #0]	@ null terminate
 	mov	r0, #-EFAULT
 	mov	pc, lr
-	.previous
+	.popsection
 
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 7855b29..0ecbb45 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -33,8 +33,8 @@ ENTRY(__strnlen_user)
 	mov	pc, lr
 ENDPROC(__strnlen_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	0
 9001:	mov	r0, #0
 	mov	pc, lr
-	.previous
+	.popsection
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index ffdd274..fee9f6f 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -279,10 +279,10 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 9001:		ldmfd	sp!, {r0, r4 - r7, pc}
-		.previous
+		.popsection
 
 /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
  * Purpose  : copy a block from user memory to kernel memory
@@ -545,7 +545,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 		/*
 		 * We took an exception.  r0 contains a pointer to
@@ -559,5 +559,5 @@ ENDPROC(__copy_from_user)
 		blne	__memzero
 		mov	r0, r4
 		ldmfd	sp!, {r4 - r7, pc}
-		.previous
+		.popsection
 
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 6b967ff..e2d2f2c 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/hardirq.h> /* for in_atomic() */
+#include <linux/gfp.h>
 #include <asm/current.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b5c5fc6b..3ef6833 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,6 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 #include <linux/clk.h>
+#include <linux/gfp.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 0b6351d..a9cac36 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 
 #include "hardware.h"
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000		@ physical
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0b2ee95..841eaf8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,14 +23,12 @@ choice
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
@@ -39,28 +37,24 @@ config ARCH_AT91SAM9260
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
@@ -68,7 +62,6 @@ config ARCH_AT91SAM9RL
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
@@ -77,7 +70,6 @@ config ARCH_AT91SAM9G20
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
@@ -85,12 +77,17 @@ config ARCH_AT91SAM9G45
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
+config ARCH_AT572D940HF
+	bool "AT572D940HF"
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91X40
 	bool "AT91x40"
+	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 
@@ -354,6 +351,19 @@ config MACH_CPU9G20
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
 
+config MACH_PORTUXG20
+	bool "taskit PortuxG20"
+	help
+	  Select this if you are using taskit's PortuxG20.
+	  <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+	bool "taskit Stamp9G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on its
+	  evaluation board.
+	  <http://www.taskit.de/en/>
+
 endif
 
 # ----------------------------------------------------------
@@ -390,6 +400,23 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT572D940HF
+
+comment "AT572D940HF Board Type"
+
+config MACH_AT572D940HFEB
+	bool "AT572D940HF-EK"
+	depends on ARCH_AT572D940HF
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
+	help
+	  Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
+	  <http://www.atmel.com/products/diopsis/default.asp>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 709fbad..c1f821e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -16,9 +16,10 @@ obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
- obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT572D940HF)  += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -62,6 +63,8 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
+obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
+obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
@@ -69,6 +72,9 @@ obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
+# AT572D940HF board-specific support
+obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
+
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
new file mode 100644
index 0000000..a6b9c68
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf.c
@@ -0,0 +1,377 @@
+/*
+ * arch/arm/mach-at91/at572d940hf.c
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at572d940hf.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at572d940hf_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT572D940HF_SRAM_BASE),
+		.length		= AT572D940HF_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc2_clk = {
+	.name		= "ssc2_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SSC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc3_clk = {
+	.name		= "ssc3_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_SSC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+	.name		= "can0_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_CAN0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk can1_clk = {
+	.name		= "can1_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_CAN1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mAgicV_clk = {
+	.name		= "mAgicV_clk",
+	.pmc_mask	= 1 << AT572D940HF_ID_MSIRQ0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&macb_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi0_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&ssc2_clk,
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&ohci_clk,
+	&ssc3_clk,
+	&twi1_clk,
+	&can0_clk,
+	&can1_clk,
+	&mAgicV_clk,
+	/* irq0 .. irq2 */
+};
+
+/*
+ * The five programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static struct clk mAgicV_mem_clk = {
+	.name		= "mAgicV_mem_clk",
+	.pmc_mask	= AT91_PMC_PCK4,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 4,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+	.name		= "hck0",
+	.pmc_mask	= AT91_PMC_HCK0,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 0,
+};
+static struct clk hck1 = {
+	.name		= "hck1",
+	.pmc_mask	= AT91_PMC_HCK1,
+	.type		= CLK_TYPE_SYSTEM,
+	.id		= 1,
+};
+
+static void __init at572d940hf_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+	clk_register(&mAgicV_mem_clk);
+
+	clk_register(&hck0);
+	clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at572d940hf_gpio[] = {
+	{
+		.id		= AT572D940HF_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT572D940HF_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT572D940HF_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}
+};
+
+static void at572d940hf_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT572D940HF processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at572d940hf_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
+
+	at91_arch_reset = at572d940hf_reset;
+	at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
+			| (1 << AT572D940HF_ID_IRQ2);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at572d940hf_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at572d940hf_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C */
+	3,	/* Ethernet */
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface */
+	4,	/* USB Device Port */
+	0,	/* Two-Wire Interface 0 */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	5,	/* Serial Synchronous Controller 2 */
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	3,	/* USB Host port */
+	3,	/* Serial Synchronous Controller 3 */
+	0,	/* Two-Wire Interface 1 */
+	0,	/* CAN Controller 0 */
+	0,	/* CAN Controller 1 */
+	0,	/* mAgicV HALT line */
+	0,	/* mAgicV SIRQ0 line */
+	0,	/* mAgicV exception line */
+	0,	/* mAgicV end of DMA line */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at572d940hf_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
+
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
new file mode 100644
index 0000000..0fc20a2
--- /dev/null
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -0,0 +1,970 @@
+/*
+ * arch/arm/mach-at91/at572d940hf_devices.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at572d940hf.h>
+#include <mach/at572d940hf_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+#include "sam9_smc.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_UHP_BASE,
+		.end	= AT572D940HF_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_UHP,
+		.end	= AT572D940HF_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	if (!data)
+		return;
+
+	usbh_data = *data;
+	platform_device_register(&at572d940hf_usbh_device);
+
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_UDP,
+		.end	= AT572D940HF_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_UDP,
+		.end	= AT572D940HF_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally */
+
+	udc_data = *data;
+	platform_device_register(&at572d940hf_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_EMAC,
+		.end	= AT572D940HF_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_EMAC,
+		.end	= AT572D940HF_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+			.dma_mask		= &eth_dmamask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+			.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Only RMII is supported */
+	data->is_rmii = 1;
+
+	/* Pins used for RMII */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA23, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA21, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA22, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* EMDC */
+
+	eth_data = *data;
+	platform_device_register(&at572d940hf_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_MCI,
+		.end	= AT572D940HF_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_MCI,
+		.end	= AT572D940HF_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_mmc_device = {
+	.name		= "at91_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* CLK */
+	at91_set_A_periph(AT91_PIN_PC22, 0);
+
+	/* CMD */
+	at91_set_A_periph(AT91_PIN_PC23, 1);
+
+	/* DAT0, maybe DAT1..DAT3 */
+	at91_set_A_periph(AT91_PIN_PC24, 1);
+	if (data->wire4) {
+		at91_set_A_periph(AT91_PIN_PC25, 1);
+		at91_set_A_periph(AT91_PIN_PC26, 1);
+		at91_set_A_periph(AT91_PIN_PC27, 1);
+	}
+
+	mmc_data = *data;
+	platform_device_register(&at572d940hf_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at572d940hf_nand_device = {
+	.name		= "atmel_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	at91_set_A_periph(AT91_PIN_PB28, 0);		/* A[22] */
+	at91_set_B_periph(AT91_PIN_PA28, 0);		/* NANDOE */
+	at91_set_B_periph(AT91_PIN_PA29, 0);		/* NANDWE */
+
+	nand_data = *data;
+	platform_device_register(&at572d940hf_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= AT91_PIN_PC7,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PC8,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at572d940hf_twi_device {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	at91_set_GPIO_periph(AT91_PIN_PC7, 1);		/* TWD (SDA) */
+	at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+	at91_set_GPIO_periph(AT91_PIN_PA8, 1);		/* TWCK (SCL) */
+	at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at572d940hf_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi0_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_TWI0,
+		.end	= AT572D940HF_BASE_TWI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_TWI0,
+		.end	= AT572D940HF_ID_TWI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_twi0_device = {
+	.name		= "at91_i2c",
+	.id		= 0,
+	.resource	= twi0_resources,
+	.num_resources	= ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_TWI1,
+		.end	= AT572D940HF_BASE_TWI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_TWI1,
+		.end	= AT572D940HF_ID_TWI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_twi1_device = {
+	.name		= "at91_i2c",
+	.id		= 1,
+	.resource	= twi1_resources,
+	.num_resources	= ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+	/* pins used for TWI0 interface */
+	at91_set_A_periph(AT91_PIN_PC7, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PC7, 1);
+
+	at91_set_A_periph(AT91_PIN_PC8, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PC8, 1);
+
+	/* pins used for TWI1 interface */
+	at91_set_A_periph(AT91_PIN_PC20, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PC20, 1);
+
+	at91_set_A_periph(AT91_PIN_PC21, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PC21, 1);
+
+	i2c_register_board_info(0, devices, nr_devices);
+	platform_device_register(&at572d940hf_twi0_device);
+	platform_device_register(&at572d940hf_twi1_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_SPI0,
+		.end	= AT572D940HF_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_SPI0,
+		.end	= AT572D940HF_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_SPI1,
+		.end	= AT572D940HF_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_SPI1,
+		.end	= AT572D940HF_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
+		platform_device_register(&at572d940hf_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PC0, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PC1, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PC2, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
+		platform_device_register(&at572d940hf_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_TCB,
+		.end	= AT572D940HF_BASE_TCB + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_TC0,
+		.end	= AT572D940HF_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT572D940HF_ID_TC1,
+		.end	= AT572D940HF_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT572D940HF_ID_TC2,
+		.end	= AT572D940HF_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at572d940hf_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
+	platform_device_register(&at572d940hf_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at572d940hf_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at572d940hf_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct platform_device at572d940hf_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at572d940hf_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_US0,
+		.end	= AT572D940HF_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_US0,
+		.end	= AT572D940HF_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PA8, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PA10, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PA9, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_US1,
+		.end	= AT572D940HF_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_US1,
+		.end	= AT572D940HF_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PC10, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PC9 , 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PC12, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PC11, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_BASE_US2,
+		.end	= AT572D940HF_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT572D940HF_ID_US2,
+		.end	= AT572D940HF_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at572d940hf_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PC15, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PC14, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PC17, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PC16, 0);	/* CTS2 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at572d940hf_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT572D940HF_ID_US0:
+			pdev = &at572d940hf_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT572D940HF_ID_US1:
+			pdev = &at572d940hf_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT572D940HF_ID_US2:
+			pdev = &at572d940hf_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  mAgic
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_MAGICV
+static struct resource mAgic_resources[] = {
+	{
+		.start = AT91_MAGIC_PM_BASE,
+		.end   = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = AT91_MAGIC_DM_I_BASE,
+		.end   = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = AT91_MAGIC_DM_F_BASE,
+		.end   = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = AT91_MAGIC_DM_DB_BASE,
+		.end   = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = AT91_MAGIC_REGS_BASE,
+		.end   = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = AT91_MAGIC_EXTPAGE_BASE,
+		.end   = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start  = AT572D940HF_ID_MSIRQ0,
+		.end    = AT572D940HF_ID_MSIRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = AT572D940HF_ID_MHALT,
+		.end    = AT572D940HF_ID_MHALT,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = AT572D940HF_ID_MEXC,
+		.end    = AT572D940HF_ID_MEXC,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = AT572D940HF_ID_MEDMA,
+		.end    = AT572D940HF_ID_MEDMA,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mAgic_device = {
+	.name           = "mAgic",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(mAgic_resources),
+	.resource       = mAgic_resources,
+};
+
+void __init at91_add_device_mAgic(void)
+{
+	platform_device_register(&mAgic_device);
+}
+#else
+void __init at91_add_device_mAgic(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	at91_add_device_tc();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 309f351..2500f41 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -58,6 +58,12 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
 	u32	sr = at91_sys_read(AT91_ST_SR) & irqmask;
 
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+
 	/* simulate "oneshot" timer with alarm */
 	if (sr & AT91_ST_ALMS) {
 		clkevt.event_handler(&clkevt);
@@ -132,24 +138,11 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static int
 clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long	flags;
 	u32		alm;
 	int		status = 0;
 
 	BUG_ON(delta < 2);
 
-	/* Use "raw" primitives so we behave correctly on RT kernels. */
-	raw_local_irq_save(flags);
-
-	/*
-	 * According to Thomas Gleixner irqs are already disabled here.  Simply
-	 * removing raw_local_irq_save above (and the matching
-	 * raw_local_irq_restore) was not accepted.  See
-	 * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
-	 * So for now (2008-11-20) just warn once if irqs were not disabled ...
-	 */
-	WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
-
 	/* The alarm IRQ uses absolute time (now+delta), not the relative
 	 * time (delta) in our calling convention.  Like all clockevents
 	 * using such "match" hardware, we have a race to defend against.
@@ -169,7 +162,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm += delta;
 	at91_sys_write(AT91_ST_RTAR, alm);
 
-	raw_local_irq_restore(flags);
 	return status;
 }
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4bd56ae..608a632 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -62,16 +62,12 @@ static struct clocksource pit_clk = {
 static void
 pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long	flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter, then enable the IRQ */
-		raw_local_irq_save(flags);
+		/* update clocksource counter */
 		pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
 		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
 				| AT91_PIT_PITIEN);
-		raw_local_irq_restore(flags);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		BUG();
@@ -100,6 +96,11 @@ static struct clock_event_device pit_clkevt = {
  */
 static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 {
+	/*
+	 * irqs should be disabled here, but as the irq is shared they are only
+	 * guaranteed to be off if the timer irq is registered first.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* The PIT interrupt may be disabled, and is shared */
 	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
new file mode 100644
index 0000000..5daff27
--- /dev/null
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -0,0 +1,328 @@
+/*
+ * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
+ *
+ * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ds1305.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init eb_map_io(void)
+{
+	/* Initialize processor: 12.500 MHz crystal */
+	at572d940hf_initialize(12000000);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx & Tx only) */
+	at91_register_uart(AT572D940HF_ID_US0, 1, 0);
+
+	/* USART1 on ttyS2. (Rx & Tx only) */
+	at91_register_uart(AT572D940HF_ID_US1, 2, 0);
+
+	/* USART2 on ttyS3. (Tx & Rx only */
+	at91_register_uart(AT572D940HF_ID_US2, 3, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init eb_init_irq(void)
+{
+	at572d940hf_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata eb_usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata eb_udc_data = {
+	.vbus_pin	= 0,		/* no VBUS detection,UDC always on */
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata eb_mmc_data = {
+	.wire4		= 1,
+/*	.det_pin	= ... not connected */
+/*	.wp_pin		= ... not connected */
+/*	.vcc_pin	= ... not connected */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata eb_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PB25,
+	.is_rmii	= 1,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct mtd_partition eb_nor_partitions[] = {
+	{
+		.name		= "Raw Environment",
+		.offset		= 0,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "OS FS",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 3 * SZ_1M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "APP FS",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static void nor_flash_set_vpp(struct map_info* mi, int i) {
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= eb_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(eb_nor_partitions),
+	.set_vpp	= nor_flash_set_vpp,
+};
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= AT91_CHIPSELECT_0,
+		.end	= AT91_CHIPSELECT_0 + SZ_16M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &nor_flash_data,
+			},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+static struct sam9_smc_config __initdata eb_nor_smc_config = {
+	.ncs_read_setup		= 1,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 1,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 7,
+	.nrd_pulse		= 7,
+	.ncs_write_pulse	= 7,
+	.nwe_pulse		= 7,
+
+	.read_cycle		= 9,
+	.write_cycle		= 9,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
+	.tdf_cycles		= 1,
+};
+
+static void __init eb_add_device_nor(void)
+{
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &eb_nor_smc_config);
+	platform_device_register(&nor_flash);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata eb_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= SZ_16M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(eb_nand_partition);
+	return eb_nand_partition;
+}
+
+static struct atmel_nand_data __initdata eb_nand_data = {
+	.ale		= 22,
+	.cle		= 21,
+/*	.det_pin	= ... not connected */
+/*	.rdy_pin	= AT91_PIN_PC16, */
+	.enable_pin	= AT91_PIN_PA15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata eb_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 1,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 12,
+};
+
+static void __init eb_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (eb_nand_data.bus_width_16)
+		eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &eb_nand_smc_config);
+
+	at91_add_device_nand(&eb_nand_data);
+}
+
+
+/*
+ * SPI devices
+ */
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= AT572D940HF_ID_IRQ1,
+		.end	= AT572D940HF_ID_IRQ1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ds1305_platform_data ds1306_data = {
+	.is_ds1306	= true,
+	.en_1hz		= false,
+};
+
+static struct spi_board_info eb_spi_devices[] = {
+	{	/* RTC Dallas DS1306 */
+		.modalias	= "rtc-ds1305",
+		.chip_select	= 3,
+		.mode		= SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
+		.max_speed_hz	= 500000,
+		.bus_num	= 0,
+		.irq		= AT572D940HF_ID_IRQ1,
+		.platform_data	= (void *) &ds1306_data,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* Dataflash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+static void __init eb_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&eb_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&eb_udc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* NOR */
+	eb_add_device_nor();
+	/* NAND */
+	eb_add_device_nand();
+	/* SPI */
+	at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &eb_mmc_data);
+	/* Ethernet */
+	at91_add_device_eth(&eb_eth_data);
+	/* mAgic */
+	at91_add_device_mAgic();
+}
+
+MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
+	/* Maintainer: Atmel <costa.antonior@gmail.com> */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= eb_map_io,
+	.init_irq	= eb_init_irq,
+	.init_machine	= eb_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 29cf831..c11fd47 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -271,10 +271,12 @@ static void __init ek_add_device_buttons(void) {}
 
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-		I2C_BOARD_INFO("wm8731", 0x1b),
-	},
+        {
+                I2C_BOARD_INFO("24c512", 0x50)
+        },
+        {
+                I2C_BOARD_INFO("wm8731", 0x1b)
+        },
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 98f9f4b..ee80059 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -25,7 +25,6 @@
 #include <linux/leds.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
new file mode 100644
index 0000000..8795827
--- /dev/null
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -0,0 +1,315 @@
+/*
+ *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
+ *                     taskit GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init portuxg20_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+
+static void __init add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &nand_smc_config);
+
+	at91_add_device_nand(&nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+	},
+};
+#else
+static struct at91_mmc_data __initdata mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+#endif
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata portuxg20_udc_data = {
+	.vbus_pin	= AT91_PIN_PC7,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+static struct at91_udc_data __initdata stamp9g20_udc_data = {
+	.vbus_pin	= AT91_PIN_PA22,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA28,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led portuxg20_leds[] = {
+	{
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC5,
+		.default_trigger	= "none",
+	}, {
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC4,
+		.default_trigger	= "none",
+	}, {
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC10,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct gpio_led stamp9g20_leds[] = {
+	{
+		.name			= "D8",
+		.gpio			= AT91_PIN_PB18,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}, {
+		.name			= "D9",
+		.gpio			= AT91_PIN_PB19,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}, {
+		.name			= "D10",
+		.gpio			= AT91_PIN_PB20,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info portuxg20_spi_devices[] = {
+	{
+		.modalias	= "spidev",
+		.chip_select	= 0,
+		.max_speed_hz	= 1 * 1000 * 1000,
+		.bus_num	= 0,
+	}, {
+		.modalias	= "spidev",
+		.chip_select	= 0,
+		.max_speed_hz	= 1 * 1000 * 1000,
+		.bus_num	= 1,
+	},
+};
+
+
+/*
+ * Dallas 1-Wire
+ */
+static struct w1_gpio_platform_data w1_gpio_pdata = {
+	.pin		= AT91_PIN_PA29,
+	.is_open_drain	= 1,
+};
+
+static struct platform_device w1_device = {
+	.name			= "w1-gpio",
+	.id			= -1,
+	.dev.platform_data	= &w1_gpio_pdata,
+};
+
+void add_w1(void)
+{
+	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
+	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
+	platform_device_register(&w1_device);
+}
+
+
+static void __init generic_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* NAND */
+	add_device_nand();
+	/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+	at91_add_device_mci(0, &mmc_data);
+#else
+	at91_add_device_mmc(0, &mmc_data);
+#endif
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* W1 */
+	add_w1();
+}
+
+static void __init portuxg20_board_init(void)
+{
+	generic_board_init();
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	/* USB Device */
+	at91_add_device_udc(&portuxg20_udc_data);
+	/* LEDs */
+	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
+}
+
+static void __init stamp9g20_board_init(void)
+{
+	generic_board_init();
+	/* USB Device */
+	at91_add_device_udc(&stamp9g20_udc_data);
+	/* LEDs */
+	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+}
+
+MACHINE_START(PORTUXG20, "taskit PortuxG20")
+	/* Maintainer: taskit GmbH */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= portuxg20_map_io,
+	.init_irq	= init_irq,
+	.init_machine	= portuxg20_board_init,
+MACHINE_END
+
+MACHINE_START(STAMP9G20, "taskit Stamp9G20")
+	/* Maintainer: taskit GmbH */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= stamp9g20_map_io,
+	.init_irq	= init_irq,
+	.init_machine	= stamp9g20_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index c042dcf..7f7da43 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -29,6 +29,7 @@
 #include <mach/cpu.h>
 
 #include "clock.h"
+#include "generic.h"
 
 
 /*
@@ -628,7 +629,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
 		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
-		   cpu_is_at91sam9g10()) {
+		   cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
@@ -711,12 +712,13 @@ int __init at91_clock_init(unsigned long main_clock)
 	/*
 	 * USB HS clock init
 	 */
-	if (cpu_has_utmi())
+	if (cpu_has_utmi()) {
 		/*
 		 * multiplier is hard-wired to 40
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+	}
 
 	/*
 	 * USB FS clock init
@@ -746,7 +748,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
 			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
-		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
+		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));		/* mdiv */
 	}
 
 	/* Register the PMC's standard clocks */
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index 1ba3b95..6cf4b78 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -22,7 +22,7 @@ struct clk {
 	struct clk	*parent;
 	u32		pmc_mask;
 	void		(*mode)(struct clk *, int);
-	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
+	unsigned	id:3;		/* PCK0..4, or 32k/main/a/b */
 	unsigned	type;		/* clock type */
 	u16		users;
 };
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 88e413b..65c3dc5 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -17,6 +17,7 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock);
 extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
+extern void __init at572d940hf_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -27,6 +28,7 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
new file mode 100644
index 0000000..2d9b0af
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach/at572d940hf.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef AT572D940HF_H
+#define AT572D940HF_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT572D940HF_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT572D940HF_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT572D940HF_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT572D940HF_ID_EMAC	5	/* MACB ethernet controller */
+#define AT572D940HF_ID_US0	6	/* USART 0 */
+#define AT572D940HF_ID_US1	7	/* USART 1 */
+#define AT572D940HF_ID_US2	8	/* USART 2 */
+#define AT572D940HF_ID_MCI	9	/* Multimedia Card Interface */
+#define AT572D940HF_ID_UDP	10	/* USB Device Port */
+#define AT572D940HF_ID_TWI0	11	/* Two-Wire Interface 0 */
+#define AT572D940HF_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT572D940HF_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT572D940HF_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT572D940HF_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT572D940HF_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT572D940HF_ID_TC0	17	/* Timer Counter 0 */
+#define AT572D940HF_ID_TC1	18	/* Timer Counter 1 */
+#define AT572D940HF_ID_TC2	19	/* Timer Counter 2 */
+#define AT572D940HF_ID_UHP	20	/* USB Host port */
+#define AT572D940HF_ID_SSC3	21	/* Serial Synchronous Controller 3 */
+#define AT572D940HF_ID_TWI1	22	/* Two-Wire Interface 1 */
+#define AT572D940HF_ID_CAN0	23	/* CAN Controller 0 */
+#define AT572D940HF_ID_CAN1	24	/* CAN Controller 1 */
+#define AT572D940HF_ID_MHALT	25	/* mAgicV HALT line */
+#define AT572D940HF_ID_MSIRQ0	26	/* mAgicV SIRQ0 line */
+#define AT572D940HF_ID_MEXC	27	/* mAgicV exception line */
+#define AT572D940HF_ID_MEDMA	28	/* mAgicV end of DMA line */
+#define AT572D940HF_ID_IRQ0	29	/* External Interrupt Source (IRQ0) */
+#define AT572D940HF_ID_IRQ1	30	/* External Interrupt Source (IRQ1) */
+#define AT572D940HF_ID_IRQ2	31	/* External Interrupt Source (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT572D940HF_BASE_TCB	0xfffa0000
+#define AT572D940HF_BASE_TC0	0xfffa0000
+#define AT572D940HF_BASE_TC1	0xfffa0040
+#define AT572D940HF_BASE_TC2	0xfffa0080
+#define AT572D940HF_BASE_UDP	0xfffa4000
+#define AT572D940HF_BASE_MCI	0xfffa8000
+#define AT572D940HF_BASE_TWI0	0xfffac000
+#define AT572D940HF_BASE_US0	0xfffb0000
+#define AT572D940HF_BASE_US1	0xfffb4000
+#define AT572D940HF_BASE_US2	0xfffb8000
+#define AT572D940HF_BASE_SSC0	0xfffbc000
+#define AT572D940HF_BASE_SSC1	0xfffc0000
+#define AT572D940HF_BASE_SSC2	0xfffc4000
+#define AT572D940HF_BASE_SPI0	0xfffc8000
+#define AT572D940HF_BASE_SPI1	0xfffcc000
+#define AT572D940HF_BASE_SSC3	0xfffd0000
+#define AT572D940HF_BASE_TWI1	0xfffd4000
+#define AT572D940HF_BASE_EMAC	0xfffd8000
+#define AT572D940HF_BASE_CAN0	0xfffdc000
+#define AT572D940HF_BASE_CAN1	0xfffe0000
+#define AT91_BASE_SYS		0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT572D940HF_ID_US0
+#define AT91_USART1	AT572D940HF_ID_US1
+#define AT91_USART2	AT572D940HF_ID_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT572D940HF_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT572D940HF_SRAM_SIZE	(48 * SZ_1K)	/* Internal SRAM size (48Kb) */
+
+#define AT572D940HF_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT572D940HF_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT572D940HF_UHP_BASE	0x00500000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
new file mode 100644
index 0000000..b6751df
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
@@ -0,0 +1,123 @@
+/*
+ * include/mach//at572d940hf_matrix.h
+ *
+ * Antonio R. Costa <costa.antonior@gmail.com>
+ * Copyright (C) 2008 Atmel
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef AT572D940HF_MATRIX_H
+#define AT572D940HF_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0x7  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SFR0	(AT91_MATRIX + 0x110)	/* Special Function Register 0 */
+#define AT91_MATRIX_SFR1	(AT91_MATRIX + 0x114)	/* Special Function Register 1 */
+#define AT91_MATRIX_SFR2	(AT91_MATRIX + 0x118)	/* Special Function Register 2 */
+#define AT91_MATRIX_SFR3	(AT91_MATRIX + 0x11C)	/* Special Function Register 3 */
+#define AT91_MATRIX_SFR4	(AT91_MATRIX + 0x120)	/* Special Function Register 4 */
+#define AT91_MATRIX_SFR5	(AT91_MATRIX + 0x124)	/* Special Function Register 5 */
+#define AT91_MATRIX_SFR6	(AT91_MATRIX + 0x128)	/* Special Function Register 6 */
+#define AT91_MATRIX_SFR7	(AT91_MATRIX + 0x12C)	/* Special Function Register 7 */
+#define AT91_MATRIX_SFR8	(AT91_MATRIX + 0x130)	/* Special Function Register 8 */
+#define AT91_MATRIX_SFR9	(AT91_MATRIX + 0x134)	/* Special Function Register 9 */
+#define AT91_MATRIX_SFR10	(AT91_MATRIX + 0x138)	/* Special Function Register 10 */
+#define AT91_MATRIX_SFR11	(AT91_MATRIX + 0x13C)	/* Special Function Register 11 */
+#define AT91_MATRIX_SFR12	(AT91_MATRIX + 0x140)	/* Special Function Register 12 */
+#define AT91_MATRIX_SFR13	(AT91_MATRIX + 0x144)	/* Special Function Register 13 */
+#define AT91_MATRIX_SFR14	(AT91_MATRIX + 0x148)	/* Special Function Register 14 */
+#define AT91_MATRIX_SFR15	(AT91_MATRIX + 0x14C)	/* Special Function Register 15 */
+
+
+/*
+ * The following registers / bits are not defined in the Datasheet (Revision A)
+ */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x100)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 550d503..57f8ee1 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -77,7 +77,7 @@
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
-#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block length */
 
 #define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
 #define AT91_MCR_RDR		0x30		/* Receive Data Register */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 64589ea..e46f93e 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -32,6 +32,7 @@
 #define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_PCK4		(1 << 12)		/* Programmable Clock 4 [AT572D940HF only] */
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index bb6f6a7..df2ed84 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -39,6 +39,7 @@
 #include <linux/usb/atmel_usba_udc.h>
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -87,7 +88,7 @@ struct at91_eth_data {
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
 #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	|| defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -143,9 +144,10 @@ extern struct platform_device *atmel_default_console_device;
 extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
+	short			use_dma_tx;	/* use transmit DMA? */
+	short			use_dma_rx;	/* use receive DMA? */
+	void __iomem		*regs;		/* virt. base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 extern void __init at91_add_device_serial(void);
 
@@ -205,6 +207,9 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
+ /* AT572D940HF DSP */
+extern void __init at91_add_device_mAgic(void);
+
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c22df30..833659d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,7 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G10	0x819903a0
+#define ARCH_ID_AT91SAM9G10	0x019903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -33,6 +33,8 @@
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
 #define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
+#define ARCH_ID_AT572D940HF	0x0e0303e0
+
 #define ARCH_ID_AT91M40800	0x14080044
 #define ARCH_ID_AT91R40807	0x44080746
 #define ARCH_ID_AT91M40807	0x14080745
@@ -106,7 +108,7 @@ static inline unsigned long at91cap9_rev_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9G10
-#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#define cpu_is_at91sam9g10()	((at91_cpu_identify() & ~AT91_CIDR_EXT)	== ARCH_ID_AT91SAM9G10)
 #else
 #define cpu_is_at91sam9g10()	(0)
 #endif
@@ -141,6 +143,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91cap9_revC()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT572D940HF
+#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
+#else
+#define cpu_is_at572d940hf() (0)
+#endif
+
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 29052ba..9e750a1 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1						@ MMU enabled?
 	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a0df8b0..3d64a75 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -32,6 +32,8 @@
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
+#elif defined(CONFIG_ARCH_AT572D940HF)
+#include <mach/at572d940hf.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index 5268af3..c80e090 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -24,21 +24,24 @@
 #include <mach/hardware.h>
 #include <mach/at91_st.h>
 #include <mach/at91_dbgu.h>
+#include <mach/at91_pmc.h>
 
 static inline void arch_idle(void)
 {
+#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#else
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
 	 * Unlike disabling the processor clock via the PMC (above)
 	 *  this allows the processor to be woken via JTAG.
 	 */
 	cpu_do_idle();
+#endif
 }
 
 void (*at91_arch_reset)(void);
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..05a6e8a 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -82,6 +82,11 @@
 #define AT91X40_MASTER_CLOCK	40000000
 #define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
 
+#elif defined(CONFIG_ARCH_AT572D940HF)
+
+#define AT572D940HF_MASTER_CLOCK	80000000
+#define CLOCK_TICK_RATE		(AT572D940HF_MASTER_CLOCK/16)
+
 #endif
 
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 987fab3..9c5b48e 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -175,8 +175,6 @@ ENTRY(at91_slow_clock)
 	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
-	wait_pllalock
-
 	/* Save PLLB setting and disable it */
 	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 	str	r3, .saved_pllbr
@@ -184,8 +182,6 @@ ENTRY(at91_slow_clock)
 	mov	r3, #AT91_PMC_PLLCOUNT
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
-	wait_pllblock
-
 	/* Turn off the main oscillator */
 	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
 	bic	r3, r3, #AT91_PMC_MOSCEN
@@ -205,13 +201,25 @@ ENTRY(at91_slow_clock)
 	ldr	r3, .saved_pllbr
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+1:
 	wait_pllblock
+2:
 
 	/* Restore PLLA setting */
 	ldr	r3, .saved_pllar
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
 	wait_pllalock
+4:
 
 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 53dd2a9..2f13919 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -29,6 +29,7 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
+#include <asm/pmu.h>
 
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
@@ -85,8 +86,23 @@ static struct platform_device nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
+static struct resource pmu_resource = {
+	.start	= IRQ_PMUIRQ,
+	.end	= IRQ_PMUIRQ,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&nand_device,
+	&pmu_device,
 };
 
 /****************************************************************************
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index e590bbe..72e405d 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -142,8 +142,7 @@ void __init bcmring_amba_init(void)
 
 	chipcHw_busInterfaceClockEnable(bus_clock);
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 7b20fcc..29c0a91 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 
 #include <mach/timer.h>
 
@@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring);
 int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	      int dirtied	/* non-zero if any of the pages were modified */
     ) {
+
+	int rc = 0;
 	int regionIdx;
 	int segmentIdx;
 	DMA_Region_t *region;
 	DMA_Segment_t *segment;
 
+	down(&memMap->lock);
+
 	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
 		region = &memMap->region[regionIdx];
 
@@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: vmalloc'd pages are not yet supported\n",
 					       __func__);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 
 			case DMA_MEM_TYPE_KMALLOC:
@@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: Unsupported memory type: %d\n",
 					       __func__, region->memType);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 			}
 
@@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	memMap->numRegionsUsed = 0;
 	memMap->inUse = 0;
 
+out:
 	up(&memMap->lock);
 
-	return 0;
+	return rc;
 }
 
 EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
index d3d2933..a51fcef 100644
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ b/arch/arm/mach-clps711x/Makefile.boot
@@ -1,7 +1,6 @@
 # The standard locations for stuff on CLPS711x type processors
-   zreladdr-y				:= 0xc0028000 
+   zreladdr-y				:= 0xc0028000
 params_phys-y				:= 0xc0000100
 # Should probably have some agreement on these...
 initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
 initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
-
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 64baf9f..072cc6b 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #CLPS7111_PHYS_BASE
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index a7b4591..9865921 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 
 #include <asm/sizes.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
new file mode 100644
index 0000000..9ebfcc4
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -0,0 +1,12 @@
+menu "CNS3XXX platform type"
+	depends on ARCH_CNS3XXX
+
+config MACH_CNS3420VB
+	bool "Support for CNS3420 Validation Board"
+	help
+	  Include support for the Cavium Networks CNS3420 MPCore Platform
+	  Baseboard.
+	  This is a platform with an on-board ARM11 MPCore and has support
+	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+
+endmenu
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
new file mode 100644
index 0000000..427507a
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot
new file mode 100644
index 0000000..7770128
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00C00000
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
new file mode 100644
index 0000000..2e30c82
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -0,0 +1,148 @@
+/*
+ * Cavium Networks CNS3420 Validation Board
+ *
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2008 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+
+/*
+ * NOR Flash
+ */
+static struct mtd_partition cns3420_nor_partitions[] = {
+	{
+		.name		= "uboot",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.size		= 0x004C0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem",
+		.size		= 0x7000000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem2",
+		.size		= 0x0AE0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "ubootenv",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data cns3420_nor_pdata = {
+	.width = 2,
+	.parts = cns3420_nor_partitions,
+	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
+};
+
+static struct resource cns3420_nor_res = {
+	.start = CNS3XXX_FLASH_BASE,
+	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device cns3420_nor_pdev = {
+	.name = "physmap-flash",
+	.id = 0,
+	.resource = &cns3420_nor_res,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &cns3420_nor_pdata,
+	},
+};
+
+/*
+ * UART
+ */
+static void __init cns3420_early_serial_setup(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	static struct uart_port cns3420_serial_port = {
+		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
+		.mapbase        = CNS3XXX_UART0_BASE,
+		.irq            = IRQ_CNS3XXX_UART0,
+		.iotype         = UPIO_MEM,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.regshift       = 2,
+		.uartclk        = 24000000,
+		.line           = 0,
+		.type           = PORT_16550A,
+		.fifosize       = 16,
+	};
+
+	early_serial_setup(&cns3420_serial_port);
+#endif
+}
+
+/*
+ * Initialization
+ */
+static struct platform_device *cns3420_pdevs[] __initdata = {
+	&cns3420_nor_pdev,
+};
+
+static void __init cns3420_init(void)
+{
+	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+
+	pm_power_off = cns3xxx_power_off;
+}
+
+static struct map_desc cns3420_io_desc[] __initdata = {
+	{
+		.virtual	= CNS3XXX_UART0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init cns3420_map_io(void)
+{
+	cns3xxx_map_io();
+	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
+
+	cns3420_early_serial_setup();
+}
+
+MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
+	.phys_io	= CNS3XXX_UART0_BASE,
+	.io_pg_offst	= (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= cns3420_map_io,
+	.init_irq	= cns3xxx_init_irq,
+	.timer		= &cns3xxx_timer,
+	.init_machine	= cns3420_init,
+MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
new file mode 100644
index 0000000..9ca4d58
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright 1999 - 2003 ARM Limited
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware/gic.h>
+#include <mach/cns3xxx.h>
+#include "core.h"
+
+static struct map_desc cns3xxx_io_desc[] __initdata = {
+	{
+		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_MISC_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PM_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init cns3xxx_map_io(void)
+{
+	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
+}
+
+/* used by entry-macro.S */
+void __iomem *gic_cpu_base_addr;
+
+void __init cns3xxx_init_irq(void)
+{
+	gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
+	gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+void cns3xxx_power_off(void)
+{
+	u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT);
+	u32 clkctrl;
+
+	printk(KERN_INFO "powering system down...\n");
+
+	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
+	clkctrl &= 0xfffff1ff;
+	clkctrl |= (0x5 << 9);		/* Hibernate */
+	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
+
+}
+
+/*
+ * Timer
+ */
+static void __iomem *cns3xxx_tmr1;
+
+static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
+				   struct clock_event_device *clk)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	int pclk = cns3xxx_cpu_clock() / 8;
+	int reload;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		reload = pclk * 20 / (3 * HZ) * 0x25000;
+		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl |= (1 << 2) | (1 << 9);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+}
+
+static int cns3xxx_timer_set_next_event(unsigned long evt,
+					struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	return 0;
+}
+
+static struct clock_event_device cns3xxx_tmr1_clockevent = {
+	.name		= "cns3xxx timer1",
+	.shift		= 8,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= cns3xxx_timer_set_mode,
+	.set_next_event	= cns3xxx_timer_set_next_event,
+	.rating		= 350,
+	.cpumask	= cpu_all_mask,
+};
+
+static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
+{
+	cns3xxx_tmr1_clockevent.irq = timer_irq;
+	cns3xxx_tmr1_clockevent.mult =
+		div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
+		       cns3xxx_tmr1_clockevent.shift);
+	cns3xxx_tmr1_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
+	cns3xxx_tmr1_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
+
+	clockevents_register_device(&cns3xxx_tmr1_clockevent);
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
+	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
+	u32 val;
+
+	/* Clear the interrupt */
+	val = readl(stat);
+	writel(val & ~(1 << 2), stat);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction cns3xxx_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= cns3xxx_timer_interrupt,
+};
+
+/*
+ * Set up the clock source and clock events devices
+ */
+static void __init __cns3xxx_timer_init(unsigned int timer_irq)
+{
+	u32 val;
+	u32 irq_mask;
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+
+	/* disable timer1 and timer2 */
+	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	/* stop free running timer3 */
+	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
+
+	/* timer1 */
+	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
+	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+
+	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
+	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
+
+	/* mask irq, non-mask timer1 overflow */
+	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+	irq_mask &= ~(1 << 2);
+	irq_mask |= 0x03;
+	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+
+	/* down counter */
+	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	val |= (1 << 9);
+	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* timer2 */
+	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
+	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
+
+	/* mask irq */
+	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
+	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+
+	/* down counter */
+	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	val |= (1 << 10);
+	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* Make irqs happen for the system timer */
+	setup_irq(timer_irq, &cns3xxx_timer_irq);
+
+	cns3xxx_clockevents_init(timer_irq);
+}
+
+static void __init cns3xxx_timer_init(void)
+{
+	cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT);
+
+	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
+}
+
+struct sys_timer cns3xxx_timer = {
+	.init = cns3xxx_timer_init,
+};
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
new file mode 100644
index 0000000..6b33ec1
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_CORE_H
+#define __CNS3XXX_CORE_H
+
+extern void __iomem *gic_cpu_base_addr;
+extern struct sys_timer cns3xxx_timer;
+
+void __init cns3xxx_map_io(void);
+void __init cns3xxx_init_irq(void);
+void cns3xxx_power_off(void);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
new file mode 100644
index 0000000..8a2f5a2
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -0,0 +1,635 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_BOARD_CNS3XXXH
+#define __MACH_BOARD_CNS3XXXH
+
+/*
+ * Memory map
+ */
+#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
+#define CNS3XXX_FLASH_SIZE			SZ_256M
+
+#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
+
+#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
+
+#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
+#define CNS3XXX_SWITCH_BASE_VIRT		0xFFF00000
+
+#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
+#define CNS3XXX_PPE_BASE_VIRT			0xFFF50000
+
+#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
+#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT		0xFFF60000
+
+#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
+#define CNS3XXX_SSP_BASE_VIRT			0xFFF01000
+
+#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
+#define CNS3XXX_DMC_BASE_VIRT			0xFFF02000
+
+#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
+#define CNS3XXX_SMC_BASE_VIRT			0xFFF03000
+
+#define SMC_MEMC_STATUS_OFFSET			0x000
+#define SMC_MEMIF_CFG_OFFSET			0x004
+#define SMC_MEMC_CFG_SET_OFFSET			0x008
+#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
+#define SMC_DIRECT_CMD_OFFSET			0x010
+#define SMC_SET_CYCLES_OFFSET			0x014
+#define SMC_SET_OPMODE_OFFSET			0x018
+#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
+#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
+#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
+#define SMC_NAND_CYCLES0_0_OFFSET		0x100
+#define SMC_OPMODE0_0_OFFSET			0x104
+#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
+#define SMC_NAND_CYCLES0_1_OFFSET		0x120
+#define SMC_OPMODE0_1_OFFSET			0x124
+#define SMC_USER_STATUS_OFFSET			0x200
+#define SMC_USER_CONFIG_OFFSET			0x204
+#define SMC_ECC_STATUS_OFFSET			0x300
+#define SMC_ECC_MEMCFG_OFFSET			0x304
+#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
+#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
+#define SMC_ECC_ADDR0_OFFSET			0x310
+#define SMC_ECC_ADDR1_OFFSET			0x314
+#define SMC_ECC_VALUE0_OFFSET			0x318
+#define SMC_ECC_VALUE1_OFFSET			0x31C
+#define SMC_ECC_VALUE2_OFFSET			0x320
+#define SMC_ECC_VALUE3_OFFSET			0x324
+#define SMC_PERIPH_ID_0_OFFSET			0xFE0
+#define SMC_PERIPH_ID_1_OFFSET			0xFE4
+#define SMC_PERIPH_ID_2_OFFSET			0xFE8
+#define SMC_PERIPH_ID_3_OFFSET			0xFEC
+#define SMC_PCELL_ID_0_OFFSET			0xFF0
+#define SMC_PCELL_ID_1_OFFSET			0xFF4
+#define SMC_PCELL_ID_2_OFFSET			0xFF8
+#define SMC_PCELL_ID_3_OFFSET			0xFFC
+
+#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
+#define CNS3XXX_GPIOA_BASE_VIRT			0xFFF04000
+
+#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
+#define CNS3XXX_GPIOB_BASE_VIRT			0xFFF05000
+
+#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
+#define CNS3XXX_RTC_BASE_VIRT			0xFFF06000
+
+#define RTC_SEC_OFFSET				0x00
+#define RTC_MIN_OFFSET				0x04
+#define RTC_HOUR_OFFSET				0x08
+#define RTC_DAY_OFFSET				0x0C
+#define RTC_SEC_ALM_OFFSET			0x10
+#define RTC_MIN_ALM_OFFSET			0x14
+#define RTC_HOUR_ALM_OFFSET			0x18
+#define RTC_REC_OFFSET				0x1C
+#define RTC_CTRL_OFFSET				0x20
+#define RTC_INTR_STS_OFFSET			0x34
+
+#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+
+#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
+#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+
+#define PM_CLK_GATE_OFFSET			0x00
+#define PM_SOFT_RST_OFFSET			0x04
+#define PM_HS_CFG_OFFSET			0x08
+#define PM_CACTIVE_STA_OFFSET			0x0C
+#define PM_PWR_STA_OFFSET			0x10
+#define PM_SYS_CLK_CTRL_OFFSET			0x14
+#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
+#define PM_PLL_HM_PD_OFFSET			0x1C
+
+#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
+#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+
+#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
+#define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
+
+#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
+#define CNS3XXX_UART2_BASE_VIRT			0xFFF0B000
+
+#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
+#define CNS3XXX_DMAC_BASE_VIRT			0xFFF0D000
+
+#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
+#define CNS3XXX_CORESIGHT_BASE_VIRT		0xFFF0E000
+
+#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
+#define CNS3XXX_CRYPTO_BASE_VIRT		0xFFF0F000
+
+#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
+#define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
+
+#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+
+#define TIMER1_COUNTER_OFFSET			0x00
+#define TIMER1_AUTO_RELOAD_OFFSET		0x04
+#define TIMER1_MATCH_V1_OFFSET			0x08
+#define TIMER1_MATCH_V2_OFFSET			0x0C
+
+#define TIMER2_COUNTER_OFFSET			0x10
+#define TIMER2_AUTO_RELOAD_OFFSET		0x14
+#define TIMER2_MATCH_V1_OFFSET			0x18
+#define TIMER2_MATCH_V2_OFFSET			0x1C
+
+#define TIMER1_2_CONTROL_OFFSET			0x30
+#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
+#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
+
+#define TIMER_FREERUN_OFFSET			0x40
+#define TIMER_FREERUN_CONTROL_OFFSET		0x44
+
+#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
+#define CNS3XXX_HCIE_BASE_VIRT			0xFFF30000
+
+#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
+#define CNS3XXX_RAID_BASE_VIRT			0xFFF12000
+
+#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
+#define CNS3XXX_AXI_IXC_BASE_VIRT		0xFFF13000
+
+#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
+#define CNS3XXX_CLCD_BASE_VIRT			0xFFF14000
+
+#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
+#define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
+
+#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
+#define CNS3XXX_USB_BASE_VIRT			0xFFF16000
+
+#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
+#define CNS3XXX_SATA2_SIZE			SZ_16M
+#define CNS3XXX_SATA2_BASE_VIRT			0xFFF17000
+
+#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
+#define CNS3XXX_CAMERA_BASE_VIRT		0xFFF18000
+
+#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
+#define CNS3XXX_SDIO_BASE_VIRT			0xFFF19000
+
+#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
+#define CNS3XXX_I2S_TDM_BASE_VIRT		0xFFF1A000
+
+#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
+#define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
+
+#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
+#define CNS3XXX_USB_OHCI_BASE_VIRT		0xFFF1C000
+
+#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
+#define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
+
+#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
+#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
+
+#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
+#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
+
+#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
+#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
+
+#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
+#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
+
+#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
+#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
+
+#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
+#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
+
+#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
+#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
+
+#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
+#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
+
+#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
+#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
+
+#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
+#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
+
+#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
+#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
+
+#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
+#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+
+#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+
+#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+
+#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+
+#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
+#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
+
+/*
+ * Misc block
+ */
+#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
+#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
+
+#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP_VALUE(0x00)
+#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP_VALUE(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP_VALUE(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP_VALUE(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP_VALUE(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP_VALUE(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP_VALUE(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x30)
+#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP_VALUE(0x34)
+#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP_VALUE(0x40)
+#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP_VALUE(0x44)
+#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP_VALUE(0x48)
+#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP_VALUE(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP_VALUE(0x50)
+#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP_VALUE(0x54)
+
+#define MISC_SATA_POWER_MODE			MISC_MEM_MAP_VALUE(0x310)
+
+#define MISC_USB_CFG_REG			MISC_MEM_MAP_VALUE(0x800)
+#define MISC_USB_STS_REG			MISC_MEM_MAP_VALUE(0x804)
+#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP_VALUE(0x808)
+#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP_VALUE(0x80c)
+#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP_VALUE(0x810)
+#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP_VALUE(0x814)
+
+#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
+#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
+#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
+#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
+#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
+#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
+#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
+#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
+#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
+#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
+#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
+#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
+#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
+#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
+#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
+#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
+#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
+
+/*
+ * Power management and clock control
+ */
+#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
+
+#define PM_CLK_GATE_REG					PMU_REG_VALUE(0x000)
+#define PM_SOFT_RST_REG					PMU_REG_VALUE(0x004)
+#define PM_HS_CFG_REG					PMU_REG_VALUE(0x008)
+#define PM_CACTIVE_STA_REG				PMU_REG_VALUE(0x00C)
+#define PM_PWR_STA_REG					PMU_REG_VALUE(0x010)
+#define PM_CLK_CTRL_REG					PMU_REG_VALUE(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG				PMU_REG_VALUE(0x018)
+#define PM_PLL_HM_PD_CTRL_REG				PMU_REG_VALUE(0x01C)
+#define PM_REGULAT_CTRL_REG				PMU_REG_VALUE(0x020)
+#define PM_WDT_CTRL_REG					PMU_REG_VALUE(0x024)
+#define PM_WU_CTRL0_REG					PMU_REG_VALUE(0x028)
+#define PM_WU_CTRL1_REG					PMU_REG_VALUE(0x02C)
+#define PM_CSR_REG					PMU_REG_VALUE(0x030)
+
+/* PM_CLK_GATE_REG */
+#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
+#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
+#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
+#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
+#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
+#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
+#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
+#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
+#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
+#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
+#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
+#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
+#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
+#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
+#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
+#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
+#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
+#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
+#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
+#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
+#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
+#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
+#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
+
+/* PM_SOFT_RST_REG */
+#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
+#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
+#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
+#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
+#define PM_SOFT_RST_REG_OFFST_GPU			(24)
+#define PM_SOFT_RST_REG_OFFST_CIM			(23)
+#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
+#define PM_SOFT_RST_REG_OFFST_I2S			(21)
+#define PM_SOFT_RST_REG_OFFST_RAID			(20)
+#define PM_SOFT_RST_REG_OFFST_SATA			(19)
+#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
+#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
+#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
+#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
+#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
+#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
+#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
+#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
+#define PM_SOFT_RST_REG_OFFST_UART3			(9)
+#define PM_SOFT_RST_REG_OFFST_UART2			(8)
+#define PM_SOFT_RST_REG_OFFST_UART1			(7)
+#define PM_SOFT_RST_REG_OFFST_RTC			(5)
+#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
+#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
+#define PM_SOFT_RST_REG_OFFST_DMC			(2)
+#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
+#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
+#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
+
+/* PMHS_CFG_REG */
+#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
+#define PM_HS_CFG_REG_OFFSET_GPU			(24)
+#define PM_HS_CFG_REG_OFFSET_CIM			(23)
+#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
+#define PM_HS_CFG_REG_OFFSET_I2S			(21)
+#define PM_HS_CFG_REG_OFFSET_RAID			(20)
+#define PM_HS_CFG_REG_OFFSET_SATA			(19)
+#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
+#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
+#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
+#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
+#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
+#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
+#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
+#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
+#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
+#define PM_HS_CFG_REG_OFFSET_UART3			(9)
+#define PM_HS_CFG_REG_OFFSET_UART2			(8)
+#define PM_HS_CFG_REG_OFFSET_UART1			(7)
+#define PM_HS_CFG_REG_OFFSET_RTC			(5)
+#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
+#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_HS_CFG_REG_OFFSET_DMC			(2)
+#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
+#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
+#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
+
+/* PM_CACTIVE_STA_REG */
+#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
+#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
+#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
+#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
+#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
+#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
+#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
+#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
+#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
+#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
+#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
+#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
+#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
+#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
+#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
+#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
+#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
+#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
+#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
+#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
+#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
+#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
+#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
+#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
+
+/* PM_PWR_STA_REG */
+#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
+#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
+#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
+#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
+#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
+#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
+#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
+#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
+#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
+#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
+#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
+#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
+#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
+#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
+#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
+#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
+#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
+#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
+#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
+#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
+#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
+#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
+#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
+#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
+
+/* PM_CLK_CTRL_REG */
+#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
+#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
+#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
+#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
+#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
+#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
+#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
+#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
+#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
+#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
+
+#define PM_CPU_CLK_DIV(DIV) { \
+	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
+	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
+}
+
+#define PM_PLL_CPU_SEL(CPU) { \
+	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
+	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
+}
+
+/* PM_PLL_LCD_I2S_CTRL_REG */
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
+
+/* PM_PLL_HM_PD_CTRL_REG */
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
+#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
+
+/* PM_WDT_CTRL_REG */
+#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
+
+/* PM_CSR_REG - Clock Scaling Register*/
+#define PM_CSR_REG_OFFSET_CSR_EN			(30)
+#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
+
+#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
+
+/* Software reset*/
+#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
+
+/*
+ * CNS3XXX support several power saving mode as following,
+ * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
+ */
+#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
+#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
+#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
+#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
+#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
+#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
+
+#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
+#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
+
+/* Change CPU frequency and divider */
+#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
+#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
+#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
+#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
+#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
+#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
+#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
+#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
+#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
+#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
+#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
+#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
+#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
+
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
+
+/* Change DDR2 frequency */
+#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
+#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
+#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
+#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
+
+void cns3xxx_pwr_soft_rst(unsigned int block);
+void cns3xxx_pwr_clk_en(unsigned int block);
+int cns3xxx_cpu_clock(void);
+
+/*
+ * ARM11 MPCore interrupt sources (primary GIC)
+ */
+#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
+#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
+#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
+#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
+#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
+#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
+
+#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
+
+#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
+#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
+#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
+#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
+#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
+#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
+
+#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
+#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
+#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
+#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
+#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
+#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
+#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
+#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
+#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
+#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
+#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
+#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
+#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
+#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
+#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
+#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
+#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
+#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
+#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
+
+#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
+#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
+#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
+#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
+#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
+#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
+#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
+#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
+#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
+
+#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
+#undef NR_IRQS
+#define NR_IRQS				NR_IRQS_CNS3XXX
+#endif
+
+#endif	/* __MACH_BOARD_CNS3XXX_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
new file mode 100644
index 0000000..d16ce7e
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright 1994-1999 Russell King
+ * Copyright 2008 Cavium Networks
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
new file mode 100644
index 0000000..5e1c554
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -0,0 +1,82 @@
+/*
+ * Low-level IRQ helper macros for Cavium Networks platforms
+ *
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h
new file mode 100644
index 0000000..57e0983
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * This file contains the hardware definitions of the Cavium Networks boards.
+ *
+ * Copyright 2003 ARM Limited.
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+#define pcibios_assign_all_busses()	1
+
+#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/io.h b/arch/arm/mach-cns3xxx/include/mach/io.h
new file mode 100644
index 0000000..33b6fc1
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/io.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2008 Cavium Networks
+ * Copyright 2003 ARM Limited
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/irqs.h b/arch/arm/mach-cns3xxx/include/mach/irqs.h
new file mode 100644
index 0000000..2ab96f8
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/irqs.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd.
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+#define IRQ_TC11MP_GIC_START	32
+
+#include <mach/cns3xxx.h>
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
new file mode 100644
index 0000000..3b6b769
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __phys_to_bus(x)	((x) + PHYS_OFFSET)
+#define __bus_to_phys(x)	((x) - PHYS_OFFSET)
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
+
+#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
new file mode 100644
index 0000000..58bb03a
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+void arch_reset(char mode, const char *cmd);
+
+#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/timex.h b/arch/arm/mach-cns3xxx/include/mach/timex.h
new file mode 100644
index 0000000..1fd0421
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * Cavium Networks architecture timex specifications
+ *
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
new file mode 100644
index 0000000..de8ead9
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/cns3xxx.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_cns3420vb())
+		return CNS3XXX_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
new file mode 100644
index 0000000..4d381ec
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * Copyright 2000 Russell King.
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#define VMALLOC_END		0xd8000000
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
new file mode 100644
index 0000000..725e1a4
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <mach/system.h>
+#include <mach/cns3xxx.h>
+
+void cns3xxx_pwr_clk_en(unsigned int block)
+{
+	PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+}
+
+void cns3xxx_pwr_power_up(unsigned int block)
+{
+	PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+
+	/* Wait for 300us for the PLL output clock locked. */
+	udelay(300);
+};
+
+void cns3xxx_pwr_power_down(unsigned int block)
+{
+	/* write '1' to power down */
+	PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+};
+
+static void cns3xxx_pwr_soft_rst_force(unsigned int block)
+{
+	/*
+	 * bit 0, 28, 29 => program low to reset,
+	 * the other else program low and then high
+	 */
+	if (block & 0x30000001) {
+		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+	} else {
+		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+		PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+	}
+}
+
+void cns3xxx_pwr_soft_rst(unsigned int block)
+{
+	static unsigned int soft_reset;
+
+	if (soft_reset & block) {
+		/* SPI/I2C/GPIO use the same block, reset once. */
+		return;
+	} else {
+		soft_reset |= block;
+	}
+	cns3xxx_pwr_soft_rst_force(block);
+}
+
+void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA.
+	 */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
+}
+
+/*
+ * cns3xxx_cpu_clock - return CPU/L2 clock
+ *  aclk: cpu clock/2
+ *  hclk: cpu clock/4
+ *  pclk: cpu clock/8
+ */
+int cns3xxx_cpu_clock(void)
+{
+	int cpu;
+	int cpu_sel;
+	int div_sel;
+
+	cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+	div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+
+	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
+
+	return cpu;
+}
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 033bfed..0316e20 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -7,6 +7,7 @@ config CP_INTC
 	bool
 
 config ARCH_DAVINCI_DMx
+	select CPU_ARM926T
 	bool
 
 menu "TI DaVinci Implementations"
@@ -41,6 +42,7 @@ config ARCH_DAVINCI_DA850
 	select ARCH_HAS_CPUFREQ
 
 config ARCH_DAVINCI_DA8XX
+	select CPU_ARM926T
 	bool
 
 config ARCH_DAVINCI_DM365
@@ -91,10 +93,14 @@ config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
+	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM6467TEVM
+	bool
+
 config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index eeb9230..6aac880 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
@@ -34,3 +34,4 @@ obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
 # Power Management
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
+obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 31dc990..212d970 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -33,9 +33,6 @@
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
 
-#define DA830_EMIF25_ASYNC_DATA_CE3_BASE	0x62000000
-#define DA830_EMIF25_CONTROL_BASE		0x68000000
-
 /*
  * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
  */
@@ -112,7 +109,7 @@ static __init void da830_evm_usb_init(void)
 	 * Set up USB clock/mode in the CFGCHIP2 register.
 	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
 	 */
-	cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 
 	/* USB2.0 PHY reference clock is 24 MHz */
 	cfgchip2 &= ~CFGCHIP2_REFFREQ;
@@ -139,7 +136,7 @@ static __init void da830_evm_usb_init(void)
 	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
 #endif
 
-	__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 
 	/* USB_REFCLKIN is not used. */
 	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
@@ -157,7 +154,7 @@ static __init void da830_evm_usb_init(void)
 				   __func__, ret);
 	}
 
-	ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
 	if (ret) {
 		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
 			   __func__, ret);
@@ -229,15 +226,22 @@ static const short da830_evm_mmc_sd_pins[] = {
 };
 
 #define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
 
 static int da830_evm_mmc_get_ro(int index)
 {
 	return gpio_get_value(DA830_MMCSD_WP_PIN);
 }
 
+static int da830_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA830_MMCSD_CD_PIN);
+}
+
 static struct davinci_mmc_config da830_evm_mmc_config = {
 	.get_ro			= da830_evm_mmc_get_ro,
-	.wires			= 4,
+	.get_cd			= da830_evm_mmc_get_cd,
+	.wires			= 8,
 	.max_freq		= 50000000,
 	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version		= MMC_CTLR_VERSION_2,
@@ -247,7 +251,7 @@ static inline void da830_evm_init_mmc(void)
 {
 	int ret;
 
-	ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
 	if (ret) {
 		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
 				ret);
@@ -262,6 +266,14 @@ static inline void da830_evm_init_mmc(void)
 	}
 	gpio_direction_input(DA830_MMCSD_WP_PIN);
 
+	ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
+	if (ret) {
+		pr_warning("da830_evm_init: can not open GPIO %d\n",
+			   DA830_MMCSD_CD_PIN);
+		return;
+	}
+	gpio_direction_input(DA830_MMCSD_CD_PIN);
+
 	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
 	if (ret) {
 		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
@@ -360,13 +372,13 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 
 static struct resource da830_evm_nand_resources[] = {
 	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA830_EMIF25_ASYNC_DATA_CE3_BASE,
-		.end	= DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA830_EMIF25_CONTROL_BASE,
-		.end	= DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -392,7 +404,7 @@ static inline void da830_evm_init_nand(int mux_mode)
 		return;
 	}
 
-	ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
 	if (ret)
 		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
 				ret);
@@ -412,7 +424,7 @@ static inline void da830_evm_init_lcdc(int mux_mode)
 {
 	int ret;
 
-	ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
 	if (ret)
 		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
@@ -492,7 +504,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da830_i2c0_pins);
+	ret = davinci_cfg_reg_list(da830_i2c0_pins);
 	if (ret)
 		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -508,7 +520,7 @@ static __init void da830_evm_init(void)
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
 
-	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
+	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
 	if (ret)
 		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
 				ret);
@@ -527,7 +539,7 @@ static __init void da830_evm_init(void)
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
-	ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
+	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
 	if (ret)
 		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
 				ret);
@@ -549,14 +561,6 @@ static int __init da830_evm_console_init(void)
 console_initcall(da830_evm_console_init);
 #endif
 
-static __init void da830_evm_irq_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
-			soc_info->intc_irq_prios);
-}
-
 static void __init da830_evm_map_io(void)
 {
 	da830_init();
@@ -567,7 +571,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_evm_irq_init,
+	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 07de8db..b280efb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -24,6 +25,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -46,8 +50,20 @@
 
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
-		.name           = "NOR filesystem",
+		.name           = "bootloaders + env",
 		.offset         = 0,
+		.size           = SZ_512K,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = SZ_2M,
+		.mask_flags     = 0,
+	},
+	{
+		.name           = "filesystem",
+		.offset         = MTDPART_OFS_APPEND,
 		.size           = MTDPART_SIZ_FULL,
 		.mask_flags     = 0,
 	},
@@ -77,6 +93,18 @@ static struct platform_device da850_evm_norflash_device = {
 	.resource	= da850_evm_norflash_resource,
 };
 
+static struct davinci_pm_config da850_pm_pdata = {
+	.sleepcount = 128,
+};
+
+static struct platform_device da850_pm_device = {
+	.name           = "pm-davinci",
+	.dev = {
+		.platform_data	= &da850_pm_pdata,
+	},
+	.id             = -1,
+};
+
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -119,6 +147,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
 	.options	= NAND_USE_FLASH_BBT,
 };
 
@@ -181,12 +210,12 @@ static __init void da850_evm_setup_nor_nand(void)
 	int ret = 0;
 
 	if (ui_card_detected & !HAS_MMC) {
-		ret = da8xx_pinmux_setup(da850_nand_pins);
+		ret = davinci_cfg_reg_list(da850_nand_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nand mux setup failed: "
 					"%d\n", ret);
 
-		ret = da8xx_pinmux_setup(da850_nor_pins);
+		ret = davinci_cfg_reg_list(da850_nor_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
 				ret);
@@ -441,6 +470,11 @@ struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 	},
 };
 
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+	.defdcdc_default = true,
+};
+
 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
@@ -466,6 +500,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* dcdc3 */
@@ -479,6 +514,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* ldo1 */
@@ -508,10 +544,24 @@ struct regulator_init_data tps65070_regulator_data[] = {
 	},
 };
 
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+	.poll_period =  30,	/* ms between touch samples */
+	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
+	.vref = 0,		/* turn off vref when not using A/D */
+	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
+	.product = 65070,	/* /sys/class/input/input?/id/product */
+	.version = 0x100,	/* /sys/class/input/input?/id/version */
+};
+
+static struct tps6507x_board tps_board = {
+	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
+
 static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
 	{
 		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps65070_regulator_data[0],
+		.platform_data = &tps_board,
 	},
 };
 
@@ -537,18 +587,18 @@ static int __init da850_evm_config_emac(void)
 	if (!machine_is_davinci_da850_evm())
 		return 0;
 
-	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 
 	val = __raw_readl(cfg_chip3_base);
 
 	if (rmii_en) {
 		val |= BIT(8);
-		ret = da8xx_pinmux_setup(da850_rmii_pins);
+		ret = davinci_cfg_reg_list(da850_rmii_pins);
 		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 							" functional\n");
 	} else {
 		val &= ~BIT(8);
-		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+		ret = davinci_cfg_reg_list(da850_cpgmac_pins);
 		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 							" functional\n");
 	}
@@ -601,7 +651,7 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	ret = davinci_cfg_reg_list(da850_i2c0_pins);
 	if (ret)
 		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -618,7 +668,7 @@ static __init void da850_evm_init(void)
 				ret);
 
 	if (HAS_MMC) {
-		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
 					" %d\n", ret);
@@ -654,20 +704,20 @@ static __init void da850_evm_init(void)
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
 
-	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	ret = davinci_cfg_reg_list(da850_mcasp_pins);
 	if (ret)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
 	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
-	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
 	/* Handle board specific muxing for LCD here */
-	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
 	if (ret)
 		pr_warning("da850_evm_init: evm specific lcd mux setup "
 				"failed: %d\n",	ret);
@@ -696,6 +746,11 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
 				ret);
+
+	ret = da850_register_pm(&da850_pm_device);
+	if (ret)
+		pr_warning("da850_evm_init: suspend registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -706,14 +761,6 @@ static int __init da850_evm_console_init(void)
 console_initcall(da850_evm_console_init);
 #endif
 
-static __init void da850_evm_irq_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
-			soc_info->intc_irq_prios);
-}
-
 static void __init da850_evm_map_io(void)
 {
 	da850_init();
@@ -724,7 +771,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_evm_irq_init,
+	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 077ecf4..a319101 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -33,9 +33,6 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips, maybe with a different block size, partitioning may
@@ -86,12 +83,12 @@ static struct davinci_nand_pdata davinci_nand_data = {
 
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -111,6 +108,8 @@ static struct platform_device davinci_nand_device = {
 static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_freq	= 400	/* kHz */,
 	.bus_delay	= 0	/* usec */,
+	.sda_pin        = 15,
+	.scl_pin        = 14,
 };
 
 static struct snd_platform_data dm355_evm_snd_data;
@@ -351,17 +350,12 @@ static __init void dm355_evm_init(void)
 	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
-static __init void dm355_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 21f32eb..f1d8132 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -30,9 +30,6 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips, maybe with a different block size, partitioning may
@@ -82,12 +79,12 @@ static struct davinci_nand_pdata davinci_nand_data = {
 
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -272,17 +269,12 @@ static __init void dm355_leopard_init(void)
 			ARRAY_SIZE(dm355_leopard_spi_info));
 }
 
-static __init void dm355_leopard_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_leopard_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b476395..84acef1 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -22,8 +22,11 @@
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/slab.h>
 #include <linux/mtd/nand.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +40,8 @@
 #include <mach/nand.h>
 #include <mach/keyscan.h>
 
+#include <media/tvp514x.h>
+
 static inline int have_imager(void)
 {
 	/* REVISIT when it's supported, trigger via Kconfig */
@@ -49,11 +54,6 @@ static inline int have_tvp7002(void)
 	return 0;
 }
 
-
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
@@ -306,6 +306,73 @@ static void dm365evm_mmc_configure(void)
 	davinci_cfg_reg(DM365_SD1_DATA0);
 }
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.i2c_adapter_id = 1,
+	.card_name = "DM365 EVM",
+	.ccdc = "ISIF",
+};
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -497,9 +564,29 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm365_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm365_set_vpfe_config(&vpfe_cfg);
 	dm365_init();
 }
 
+static struct spi_eeprom at25640 = {
+	.byte_len	= SZ_64K / 8,
+	.name		= "at25640",
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+	{
+		.modalias	= "at25",
+		.platform_data	= &at25640,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
 static __init void dm365_evm_init(void)
 {
 	evm_init_i2c();
@@ -513,14 +600,16 @@ static __init void dm365_evm_init(void)
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
 
+#ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	dm365_init_asp(&dm365_evm_snd_data);
+#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
+	dm365_init_vc(&dm365_evm_snd_data);
+#endif
 	dm365_init_rtc();
 	dm365_init_ks(&dm365evm_ks_data);
-}
 
-static __init void dm365_evm_irq_init(void)
-{
-	davinci_irq_init();
+	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
+			ARRAY_SIZE(dm365_evm_spi_info));
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
@@ -528,7 +617,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (0x80000100),
 	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_evm_irq_init,
+	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e9612cf..34c8b41 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -41,14 +41,6 @@
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
-#define DAVINCI_CFC_ATA_BASE		  0x01C66000
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE  0x04000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE  0x06000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE  0x08000000
-
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)
 
@@ -92,8 +84,8 @@ static struct physmap_flash_data davinci_evm_norflash_data = {
 /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
  * limits addresses to 16M, so using addresses past 16M will wrap */
 static struct resource davinci_evm_norflash_resource = {
-	.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-	.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+	.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+	.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -111,7 +103,7 @@ static struct platform_device davinci_evm_norflash_device = {
  * It may used instead of the (default) NOR chip to boot, using TI's
  * tools to install the secondary boot loader (UBL) and U-Boot.
  */
-struct mtd_partition davinci_evm_nandflash_partition[] = {
+static struct mtd_partition davinci_evm_nandflash_partition[] = {
 	/* Bootloader layout depends on whose u-boot is installed, but we
 	 * can hide all the details.
 	 *  - block 0 for u-boot environment ... in mainline u-boot
@@ -154,12 +146,12 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 
 static struct resource davinci_evm_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -258,32 +250,6 @@ static struct platform_device rtc_dev = {
 	.id             = -1,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start          = DAVINCI_CFC_ATA_BASE,
-		.end            = DAVINCI_CFC_ATA_BASE + 0x7ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = IRQ_IDE,
-		.end            = IRQ_IDE,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
 static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
@@ -629,6 +595,8 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_freq	= 20 /* kHz */,
 	.bus_delay	= 100 /* usec */,
+	.sda_pin        = 44,
+	.scl_pin        = 43,
 };
 
 static void __init evm_init_i2c(void)
@@ -702,10 +670,7 @@ static __init void davinci_evm_init(void)
 			pr_warning("WARNING: both IDE and Flash are "
 				"enabled, but they share AEMIF pins.\n"
 				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-		platform_device_register(&ide_dev);
+		davinci_init_ide();
 	} else if (HAS_NAND || HAS_NOR) {
 		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
 		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
@@ -739,18 +704,13 @@ static __init void davinci_evm_init(void)
 
 }
 
-static __init void davinci_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_evm_map_io,
-	.init_irq     = davinci_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8d0b0e0..6d88893 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/clk.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,54 +40,13 @@
 #include <mach/serial.h>
 #include <mach/i2c.h>
 #include <mach/nand.h>
+#include <mach/clock.h>
+#include <mach/cdce949.h>
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x20008000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x42000000
+#include "clock.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST		BIT(0)
-#define DM646X_EVM_ATA_PWD		BIT(1)
-
-#define DM646X_EVM_PHY_MASK		(0x2)
-#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-
-#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
-#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
-#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8		(BIT(9))
-#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
-#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8		(BIT(13))
-#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
-
-#define VIDCH2CLK		(BIT(10))
-#define VIDCH3CLK		(BIT(11))
-#define VIDCH1CLK		(BIT(4))
-#define TVP7002_INPUT		(BIT(4))
-#define TVP5147_INPUT		(~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-static void __iomem *vpif_vidclkctl_reg;
-static void __iomem *vpif_vsclkdis_reg;
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 /* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
  * and U-Boot environment this avoids dependency on any particular combination
  * of UBL, U-Boot or flashing tools etc.
@@ -122,12 +82,12 @@ static struct davinci_nand_pdata davinci_nand_data = {
 
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
+		.end		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM646X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -144,6 +104,17 @@ static struct platform_device davinci_nand_device = {
 	},
 };
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 /* CPLD Register 0 Client: used for I/O Control */
 static int cpld_reg0_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
@@ -417,6 +388,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("cpld_video", 0x3b),
 	},
+	{
+		I2C_BOARD_INFO("cdce949", 0x6c),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -424,6 +398,30 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static int set_vpif_clock(int mux_mode, int hd)
 {
 	unsigned long flags;
@@ -685,11 +683,44 @@ static void __init evm_init_i2c(void)
 	evm_init_video();
 }
 
+#define CDCE949_XIN_RATE	27000000
+
+/* CDCE949 support - "lpsc" field is overridden to work as clock number */
+static struct clk cdce_clk_in = {
+	.name	= "cdce_xin",
+	.rate	= CDCE949_XIN_RATE,
+};
+
+static struct clk_lookup cdce_clks[] = {
+	CLK(NULL, "xin", &cdce_clk_in),
+	CLK(NULL, NULL, NULL),
+};
+
+static void __init cdce_clk_init(void)
+{
+	struct clk_lookup *c;
+	struct clk *clk;
+
+	for (c = cdce_clks; c->clk; c++) {
+		clk = c->clk;
+		clkdev_add(c);
+		clk_register(clk);
+	}
+}
+
 static void __init davinci_map_io(void)
 {
 	dm646x_init();
+	cdce_clk_init();
 }
 
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+#define DM646X_EVM_PHY_MASK		(0x2)
+#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
 static __init void evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -702,15 +733,21 @@ static __init void evm_init(void)
 	platform_device_register(&davinci_nand_device);
 
 	if (HAS_ATA)
-		dm646x_init_ide();
+		davinci_init_ide();
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
 }
 
-static __init void davinci_dm646x_evm_irq_init(void)
+#define DM646X_EVM_REF_FREQ		27000000
+#define DM6467T_EVM_REF_FREQ		33000000
+
+void __init dm646x_board_setup_refclk(struct clk *clk)
 {
-	davinci_irq_init();
+	if (machine_is_davinci_dm6467tevm())
+		clk->rate = DM6467T_EVM_REF_FREQ;
+	else
+		clk->rate = DM646X_EVM_REF_FREQ;
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
@@ -718,7 +755,17 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
-	.init_irq     = davinci_dm646x_evm_irq_init,
+	.init_irq     = davinci_irq_init,
+	.timer        = &davinci_timer,
+	.init_machine = evm_init,
+MACHINE_END
+
+MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (0x80000100),
+	.map_io       = davinci_map_io,
+	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index bd9ca07..4c30e92 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -31,6 +31,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/dm644x.h>
+#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
@@ -41,11 +42,6 @@
 #define NEUROS_OSD2_PHY_MASK		0x2
 #define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
-#define DAVINCI_CFC_ATA_BASE		 0x01C66000
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE	 0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-
 #define LXT971_PHY_ID			0x001378e2
 #define LXT971_PHY_MASK			0xfffffff0
 
@@ -60,7 +56,7 @@
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
-struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
 	{
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
@@ -98,12 +94,12 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 
 static struct resource davinci_ntosd2_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -130,32 +126,6 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_CFC_ATA_BASE,
-		.end		= DAVINCI_CFC_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_IDE,
-		.end		= IRQ_IDE,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name		= "palm_bk3710",
-	.id		= -1,
-	.resource	= ide_resources,
-	.num_resources	= ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
 static struct snd_platform_data dm644x_ntosd2_snd_data;
 
 static struct gpio_led ntosd2_leds[] = {
@@ -259,10 +229,7 @@ static __init void davinci_ntosd2_init(void)
 			pr_warning("WARNING: both IDE and Flash are "
 				"enabled, but they share AEMIF pins.\n"
 				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-		platform_device_register(&ide_dev);
+		davinci_init_ide();
 	} else if (HAS_NAND) {
 		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
 		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
@@ -306,18 +273,13 @@ static __init void davinci_ntosd2_init(void)
 	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
 }
 
-static __init void davinci_ntosd2_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
 	.map_io		 = davinci_ntosd2_map_io,
-	.init_irq	= davinci_ntosd2_irq_init,
+	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 08d373b..23e664a 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -45,10 +45,7 @@
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
-
-struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
 	/* U-Boot Environment: Block 0
 	 * UBL:                Block 1
 	 * U-Boot:             Blocks 6-7 (256 kb)
@@ -76,12 +73,12 @@ static struct flash_platform_data davinci_sffsdr_nandflash_data = {
 
 static struct resource davinci_sffsdr_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -155,18 +152,13 @@ static __init void davinci_sffsdr_init(void)
 	davinci_cfg_reg(DM644X_VLYNQWD);
 }
 
-static __init void davinci_sffsdr_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_sffsdr_map_io,
-	.init_irq     = davinci_sffsdr_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
 MACHINE_END
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
new file mode 100644
index 0000000..ba8b12b
--- /dev/null
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -0,0 +1,294 @@
+/*
+ * TI CDCE949 clock synthesizer driver
+ *
+ * Note: This implementation assumes an input of 27MHz to the CDCE.
+ * This is by no means constrained by CDCE hardware although the datasheet
+ * does use this as an example for all illustrations and more importantly:
+ * that is the crystal input on boards it is currently used on.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <mach/clock.h>
+#include <mach/cdce949.h>
+
+#include "clock.h"
+
+static struct i2c_client *cdce_i2c_client;
+static DEFINE_MUTEX(cdce_mutex);
+
+/* CDCE register descriptor */
+struct cdce_reg {
+	u8	addr;
+	u8	val;
+};
+
+/* Per-Output (Y1, Y2 etc.) frequency descriptor */
+struct cdce_freq {
+	/* Frequency in KHz */
+	unsigned long frequency;
+	/*
+	 * List of registers to program to obtain a particular frequency.
+	 * 0x0 in register address and value is the end of list marker.
+	 */
+	struct cdce_reg *reglist;
+};
+
+#define CDCE_FREQ_TABLE_ENTRY(line, out)		\
+{							\
+	.reglist	= cdce_y ##line## _ ##out,		\
+	.frequency	= out,				\
+}
+
+/* List of CDCE outputs  */
+struct cdce_output {
+	/* List of frequencies on this output */
+	struct cdce_freq *freq_table;
+	/* Number of possible frequencies */
+	int size;
+};
+
+/*
+ * Finding out the values to program into CDCE949 registers for a particular
+ * frequency output is not a simple calculation. Have a look at the datasheet
+ * for the details. There is desktop software available to help users with
+ * the calculations. Here, we just depend on the output of that software
+ * (or hand calculations) instead trying to runtime calculate the register
+ * values and inflicting misery on ourselves.
+ */
+static struct cdce_reg cdce_y1_148500[] = {
+	{ 0x13, 0x00 },
+	/* program PLL1_0 multiplier */
+	{ 0x18, 0xaf },
+	{ 0x19, 0x50 },
+	{ 0x1a, 0x02 },
+	{ 0x1b, 0xc9 },
+	/* program PLL1_11 multiplier */
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x40 },
+	{ 0x1e, 0x02 },
+	{ 0x1f, 0xc9 },
+	/* output state selection */
+	{ 0x15, 0x00 },
+	{ 0x14, 0xef },
+	/* switch MUX to PLL1 output */
+	{ 0x14, 0x6f },
+	{ 0x16, 0x06 },
+	/* set P2DIV divider, P3DIV and input crystal */
+	{ 0x17, 0x06 },
+	{ 0x01, 0x00 },
+	{ 0x05, 0x48 },
+	{ 0x02, 0x80 },
+	/* enable and disable PLL */
+	{ 0x02, 0xbc },
+	{ 0x03, 0x01 },
+	{ },
+};
+
+static struct cdce_reg cdce_y1_74250[] = {
+	{ 0x13, 0x00 },
+	{ 0x18, 0xaf },
+	{ 0x19, 0x50 },
+	{ 0x1a, 0x02 },
+	{ 0x1b, 0xc9 },
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x40 },
+	{ 0x1e, 0x02 },
+	{ 0x1f, 0xc9 },
+	/* output state selection */
+	{ 0x15, 0x00 },
+	{ 0x14, 0xef },
+	/* switch MUX to PLL1 output */
+	{ 0x14, 0x6f },
+	{ 0x16, 0x06 },
+	/* set P2DIV divider, P3DIV and input crystal */
+	{ 0x17, 0x06 },
+	{ 0x01, 0x00 },
+	{ 0x05, 0x48 },
+	{ 0x02, 0x80 },
+	/* enable and disable PLL */
+	{ 0x02, 0xbc },
+	{ 0x03, 0x02 },
+	{ },
+};
+
+static struct cdce_reg cdce_y1_27000[] = {
+	{ 0x13, 0x00 },
+	{ 0x18, 0x00 },
+	{ 0x19, 0x40 },
+	{ 0x1a, 0x02 },
+	{ 0x1b, 0x08 },
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x40 },
+	{ 0x1e, 0x02 },
+	{ 0x1f, 0x08 },
+	{ 0x15, 0x02 },
+	{ 0x14, 0xed },
+	{ 0x16, 0x01 },
+	{ 0x17, 0x01 },
+	{ 0x01, 0x00 },
+	{ 0x05, 0x50 },
+	{ 0x02, 0xb4 },
+	{ 0x03, 0x01 },
+	{ },
+};
+
+static struct cdce_freq cdce_y1_freqs[] = {
+	CDCE_FREQ_TABLE_ENTRY(1, 148500),
+	CDCE_FREQ_TABLE_ENTRY(1, 74250),
+	CDCE_FREQ_TABLE_ENTRY(1, 27000),
+};
+
+static struct cdce_reg cdce_y5_13500[] = {
+	{ 0x27, 0x08 },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x40 },
+	{ 0x2a, 0x02 },
+	{ 0x2b, 0x08 },
+	{ 0x24, 0x6f },
+	{ },
+};
+
+static struct cdce_reg cdce_y5_16875[] = {
+	{ 0x27, 0x08 },
+	{ 0x28, 0x9f },
+	{ 0x29, 0xb0 },
+	{ 0x2a, 0x02 },
+	{ 0x2b, 0x89 },
+	{ 0x24, 0x6f },
+	{ },
+};
+
+static struct cdce_reg cdce_y5_27000[] = {
+	{ 0x27, 0x04 },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x40 },
+	{ 0x2a, 0x02 },
+	{ 0x2b, 0x08 },
+	{ 0x24, 0x6f },
+	{ },
+};
+static struct cdce_reg cdce_y5_54000[] = {
+	{ 0x27, 0x04 },
+	{ 0x28, 0xff },
+	{ 0x29, 0x80 },
+	{ 0x2a, 0x02 },
+	{ 0x2b, 0x07 },
+	{ 0x24, 0x6f },
+	{ },
+};
+
+static struct cdce_reg cdce_y5_81000[] = {
+	{ 0x27, 0x02 },
+	{ 0x28, 0xbf },
+	{ 0x29, 0xa0 },
+	{ 0x2a, 0x03 },
+	{ 0x2b, 0x0a },
+	{ 0x24, 0x6f },
+	{ },
+};
+
+static struct cdce_freq cdce_y5_freqs[] = {
+	CDCE_FREQ_TABLE_ENTRY(5, 13500),
+	CDCE_FREQ_TABLE_ENTRY(5, 16875),
+	CDCE_FREQ_TABLE_ENTRY(5, 27000),
+	CDCE_FREQ_TABLE_ENTRY(5, 54000),
+	CDCE_FREQ_TABLE_ENTRY(5, 81000),
+};
+
+
+static struct cdce_output output_list[] = {
+	[1]	= { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) },
+	[5]	= { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) },
+};
+
+int cdce_set_rate(struct clk *clk, unsigned long rate)
+{
+	int i, ret = 0;
+	struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table;
+	struct cdce_reg  *regs = NULL;
+
+	if (!cdce_i2c_client)
+		return -ENODEV;
+
+	if (!freq_table)
+		return -EINVAL;
+
+	for (i = 0; i < output_list[clk->lpsc].size; i++) {
+		if (freq_table[i].frequency == rate / 1000) {
+			regs = freq_table[i].reglist;
+			break;
+		}
+	}
+
+	if (!regs)
+		return -EINVAL;
+
+	mutex_lock(&cdce_mutex);
+	for (i = 0; regs[i].addr; i++) {
+		ret = i2c_smbus_write_byte_data(cdce_i2c_client,
+					regs[i].addr | 0x80, regs[i].val);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&cdce_mutex);
+
+	if (!ret)
+		clk->rate = rate;
+
+	return ret;
+}
+
+static int cdce_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	cdce_i2c_client = client;
+	return 0;
+}
+
+static int __devexit cdce_remove(struct i2c_client *client)
+{
+	cdce_i2c_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cdce_id[] = {
+	{"cdce949", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, cdce_id);
+
+static struct i2c_driver cdce_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "cdce949",
+	},
+	.probe		= cdce_probe,
+	.remove		= __devexit_p(cdce_remove),
+	.id_table	= cdce_id,
+};
+
+static int __init cdce_init(void)
+{
+	return i2c_add_driver(&cdce_driver);
+}
+subsys_initcall(cdce_init);
+
+static void __exit cdce_exit(void)
+{
+	i2c_del_driver(&cdce_driver);
+}
+module_exit(cdce_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("CDCE949 clock synthesizer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index baece65..054c303 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 
+#include <mach/clock.h>
 #include <mach/psc.h>
 #include <mach/cputype.h>
 #include "clock.h"
@@ -42,15 +43,19 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+				PSC_STATE_ENABLE);
 }
 
 static void __clk_disable(struct clk *clk)
 {
 	if (WARN_ON(clk->usecount == 0))
 		return;
-	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
+	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
+	    (clk->flags & CLK_PSC))
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+				(clk->flags & PSC_SWRSTDISABLE) ?
+				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -124,9 +129,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return ret;
 
-	spin_lock_irqsave(&clockfw_lock, flags);
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
+
+	spin_lock_irqsave(&clockfw_lock, flags);
 	if (ret == 0) {
 		if (clk->recalc)
 			clk->rate = clk->recalc(clk);
@@ -231,7 +237,10 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
+
+		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
+				(ck->flags & PSC_SWRSTDISABLE) ?
+				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
@@ -270,7 +279,7 @@ static unsigned long clk_sysclk_recalc(struct clk *clk)
 
 	v = __raw_readl(pll->base + clk->div_reg);
 	if (v & PLLDIV_EN) {
-		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+		plldiv = (v & pll->div_ratio_mask) + 1;
 		if (plldiv)
 			rate /= plldiv;
 	}
@@ -293,7 +302,6 @@ static unsigned long clk_pllclk_recalc(struct clk *clk)
 	struct pll_data *pll = clk->pll_data;
 	unsigned long rate = clk->rate;
 
-	pll->base = IO_ADDRESS(pll->phys_base);
 	ctrl = __raw_readl(pll->base + PLLCTL);
 	rate = pll->input_rate = clk->parent->rate;
 
@@ -310,7 +318,7 @@ static unsigned long clk_pllclk_recalc(struct clk *clk)
 	if (pll->flags & PLL_HAS_PREDIV) {
 		prediv = __raw_readl(pll->base + PREDIV);
 		if (prediv & PLLDIV_EN)
-			prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+			prediv = (prediv & pll->div_ratio_mask) + 1;
 		else
 			prediv = 1;
 	}
@@ -322,7 +330,7 @@ static unsigned long clk_pllclk_recalc(struct clk *clk)
 	if (pll->flags & PLL_HAS_POSTDIV) {
 		postdiv = __raw_readl(pll->base + POSTDIV);
 		if (postdiv & PLLDIV_EN)
-			postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+			postdiv = (postdiv & pll->div_ratio_mask) + 1;
 		else
 			postdiv = 1;
 	}
@@ -363,6 +371,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 {
 	u32 ctrl;
 	unsigned int locktime;
+	unsigned long flags;
 
 	if (pll->base == NULL)
 		return -EINVAL;
@@ -376,25 +385,23 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 		locktime = ((2000 * prediv) / 100);
 		prediv = (prediv - 1) | PLLDIV_EN;
 	} else {
-		locktime = 20;
+		locktime = PLL_LOCK_TIME;
 	}
 	if (postdiv)
 		postdiv = (postdiv - 1) | PLLDIV_EN;
 	if (mult)
 		mult = mult - 1;
 
+	/* Protect against simultaneous calls to PLL setting seqeunce */
+	spin_lock_irqsave(&clockfw_lock, flags);
+
 	ctrl = __raw_readl(pll->base + PLLCTL);
 
 	/* Switch the PLL to bypass mode */
 	ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
 	__raw_writel(ctrl, pll->base + PLLCTL);
 
-	/*
-	 * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
-	 * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
-	 * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
-	 */
-	udelay(1);
+	udelay(PLL_BYPASS_TIME);
 
 	/* Reset and enable PLL */
 	ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
@@ -408,11 +415,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 	if (pll->flags & PLL_HAS_POSTDIV)
 		__raw_writel(postdiv, pll->base + POSTDIV);
 
-	/*
-	 * Wait for PLL to reset properly, OMAP-L138 datasheet says
-	 * 'min' time = 125ns
-	 */
-	udelay(1);
+	udelay(PLL_RESET_TIME);
 
 	/* Bring PLL out of reset */
 	ctrl |= PLLCTL_PLLRST;
@@ -424,17 +427,20 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 	ctrl |= PLLCTL_PLLEN;
 	__raw_writel(ctrl, pll->base + PLLCTL);
 
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
 	return 0;
 }
 EXPORT_SYMBOL(davinci_set_pllrate);
 
-int __init davinci_clk_init(struct davinci_clk *clocks)
+int __init davinci_clk_init(struct clk_lookup *clocks)
   {
-	struct davinci_clk *c;
+	struct clk_lookup *c;
 	struct clk *clk;
+	size_t num_clocks = 0;
 
-	for (c = clocks; c->lk.clk; c++) {
-		clk = c->lk.clk;
+	for (c = clocks; c->clk; c++) {
+		clk = c->clk;
 
 		if (!clk->recalc) {
 
@@ -451,41 +457,41 @@ int __init davinci_clk_init(struct davinci_clk *clocks)
 				clk->recalc = clk_leafclk_recalc;
 		}
 
+		if (clk->pll_data) {
+			struct pll_data *pll = clk->pll_data;
+
+			if (!pll->div_ratio_mask)
+				pll->div_ratio_mask = PLLDIV_RATIO_MASK;
+
+			if (pll->phys_base && !pll->base) {
+				pll->base = ioremap(pll->phys_base, SZ_4K);
+				WARN_ON(!pll->base);
+			}
+		}
+
 		if (clk->recalc)
 			clk->rate = clk->recalc(clk);
 
 		if (clk->lpsc)
 			clk->flags |= CLK_PSC;
 
-		clkdev_add(&c->lk);
 		clk_register(clk);
+		num_clocks++;
 
 		/* Turn on clocks that Linux doesn't otherwise manage */
 		if (clk->flags & ALWAYS_ENABLED)
 			clk_enable(clk);
 	}
 
-	return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
+	clkdev_add_table(clocks, num_clocks);
 
-static void *davinci_ck_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
+	return 0;
 }
 
-static void *davinci_ck_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return NULL;
-}
+#ifdef CONFIG_DEBUG_FS
 
-static void davinci_ck_stop(struct seq_file *m, void *v)
-{
-}
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #define CLKNAME_MAX	10		/* longest clock name */
 #define NEST_DELTA	2
@@ -525,41 +531,38 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 
 static int davinci_ck_show(struct seq_file *m, void *v)
 {
-	/* Show clock tree; we know the main oscillator is first.
-	 * We trust nonzero usecounts equate to PSC enables...
+	struct clk *clk;
+
+	/*
+	 * Show clock tree; We trust nonzero usecounts equate to PSC enables...
 	 */
 	mutex_lock(&clocks_mutex);
-	if (!list_empty(&clocks))
-		dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+	list_for_each_entry(clk, &clocks, node)
+		if (!clk->parent)
+			dump_clock(m, 0, clk);
 	mutex_unlock(&clocks_mutex);
 
 	return 0;
 }
 
-static const struct seq_operations davinci_ck_op = {
-	.start	= davinci_ck_start,
-	.next	= davinci_ck_next,
-	.stop	= davinci_ck_stop,
-	.show	= davinci_ck_show
-};
-
 static int davinci_ck_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &davinci_ck_op);
+	return single_open(file, davinci_ck_show, NULL);
 }
 
-static const struct file_operations proc_davinci_ck_operations = {
+static const struct file_operations davinci_ck_operations = {
 	.open		= davinci_ck_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
-static int __init davinci_ck_proc_init(void)
+static int __init davinci_clk_debugfs_init(void)
 {
-	proc_create("davinci_clocks", 0, NULL, &proc_davinci_ck_operations);
+	debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL,
+						&davinci_ck_operations);
 	return 0;
 
 }
-__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+device_initcall(davinci_clk_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index c92d77a..01e3648 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -12,9 +12,6 @@
 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
 #define __ARCH_ARM_DAVINCI_CLOCK_H
 
-#include <linux/list.h>
-#include <asm/clkdev.h>
-
 #define DAVINCI_PLL1_BASE 0x01c40800
 #define DAVINCI_PLL2_BASE 0x01c40c00
 #define MAX_PLL 2
@@ -53,12 +50,33 @@
 #define PLLDIV_EN       BIT(15)
 #define PLLDIV_RATIO_MASK 0x1f
 
+/*
+ * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
+ * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
+ * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
+ * is ~25MHz. Units are micro seconds.
+ */
+#define PLL_BYPASS_TIME		1
+/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
+#define PLL_RESET_TIME		1
+/*
+ * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
+ * Units are micro seconds.
+ */
+#define PLL_LOCK_TIME		20
+
+#ifndef __ASSEMBLER__
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
 struct pll_data {
 	u32 phys_base;
 	void __iomem *base;
 	u32 num;
 	u32 flags;
 	u32 input_rate;
+	u32 div_ratio_mask;
 };
 #define PLL_HAS_PREDIV          0x01
 #define PLL_HAS_POSTDIV         0x02
@@ -84,28 +102,26 @@ struct clk {
 
 /* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
-#define CLK_PSC                 BIT(2)
-#define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PSC			BIT(2)
+#define PSC_DSP			BIT(3) /* PSC uses DSP domain, not ARM */
 #define CLK_PLL			BIT(4) /* PLL-derived clock */
-#define PRE_PLL                 BIT(5) /* source is before PLL mult/div */
+#define PRE_PLL			BIT(5) /* source is before PLL mult/div */
+#define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
 
-struct davinci_clk {
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck) 		\
-	{				\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
+#define CLK(dev, con, ck) 	\
+	{			\
+		.dev_id = dev,	\
+		.con_id = con,	\
+		.clk = ck,	\
+	}			\
 
-int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_clk_init(struct clk_lookup *clocks);
 int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 				unsigned int mult, unsigned int postdiv);
 
 extern struct platform_device davinci_wdt_device;
+extern void davinci_watchdog_reset(struct platform_device *);
+
+#endif
 
 #endif
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index c2de94c..1d25573 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -11,13 +11,13 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/etherdevice.h>
+#include <linux/davinci_emac.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
 #include <mach/cputype.h>
-#include <mach/emac.h>
 
 #include "clock.h"
 
@@ -37,26 +37,43 @@ void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 
-static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
-	int i;
-	struct davinci_id *dip;
-	u8 variant = (jtag_id & 0xf0000000) >> 28;
-	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+	int			i;
+	struct davinci_id	*dip;
+	u8			variant;
+	u16			part_no;
+	void __iomem		*base;
+
+	base = ioremap(soc_info->jtag_id_reg, SZ_4K);
+	if (!base) {
+		pr_err("Unable to map JTAG ID register\n");
+		return -ENOMEM;
+	}
+
+	soc_info->jtag_id = __raw_readl(base);
+	iounmap(base);
+
+	variant = (soc_info->jtag_id & 0xf0000000) >> 28;
+	part_no = (soc_info->jtag_id & 0x0ffff000) >> 12;
 
-	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+	for (i = 0, dip = soc_info->ids; i < soc_info->ids_num;
 			i++, dip++)
 		/* Don't care about the manufacturer right now */
-		if ((dip->part_no == part_no) && (dip->variant == variant))
-			return dip;
-
-	return NULL;
+		if ((dip->part_no == part_no) && (dip->variant == variant)) {
+			soc_info->cpu_id = dip->cpu_id;
+			pr_info("DaVinci %s variant 0x%x\n", dip->name,
+					dip->variant);
+			return 0;
+		}
+
+	pr_err("Unknown DaVinci JTAG ID 0x%x\n", soc_info->jtag_id);
+	return -EINVAL;
 }
 
 void __init davinci_common_init(struct davinci_soc_info *soc_info)
 {
 	int ret;
-	struct davinci_id *dip;
 
 	if (!soc_info) {
 		ret = -EINVAL;
@@ -77,22 +94,16 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	local_flush_tlb_all();
 	flush_cache_all();
 
+	if (!davinci_soc_info.reset)
+		davinci_soc_info.reset = davinci_watchdog_reset;
+
 	/*
 	 * We want to check CPU revision early for cpu_is_xxxx() macros.
 	 * IO space mapping must be initialized before we can do that.
 	 */
-	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
-
-	dip = davinci_get_id(davinci_soc_info.jtag_id);
-	if (!dip) {
-		ret = -EINVAL;
-		pr_err("Unknown DaVinci JTAG ID 0x%x\n",
-						davinci_soc_info.jtag_id);
+	ret = davinci_init_id(&davinci_soc_info);
+	if (ret < 0)
 		goto err;
-	}
-
-	davinci_soc_info.cpu_id = dip->cpu_id;
-	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
 
 	if (davinci_soc_info.cpu_clks) {
 		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
@@ -101,8 +112,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 			goto err;
 	}
 
-	davinci_intc_base = davinci_soc_info.intc_base;
-	davinci_intc_type = davinci_soc_info.intc_type;
 	return;
 
 err:
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 37311d1..bb4c40e 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -13,18 +13,17 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 
-static void __iomem *cp_intc_base;
-
 static inline unsigned int cp_intc_read(unsigned offset)
 {
-	return __raw_readl(cp_intc_base + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void cp_intc_write(unsigned long value, unsigned offset)
 {
-	__raw_writel(value, cp_intc_base + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 static void cp_intc_ack_irq(unsigned int irq)
@@ -100,13 +99,18 @@ static struct irq_chip cp_intc_irq_chip = {
 	.set_wake	= cp_intc_set_wake,
 };
 
-void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
-			 u8 *irq_prio)
+void __init cp_intc_init(void)
 {
+	unsigned long num_irq	= davinci_soc_info.intc_irq_num;
+	u8 *irq_prio		= davinci_soc_info.intc_irq_prios;
+	u32 *host_map		= davinci_soc_info.intc_host_map;
 	unsigned num_reg	= BITS_TO_LONGS(num_irq);
 	int i;
 
-	cp_intc_base = base;
+	davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
+	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
+	if (WARN_ON(!davinci_intc_base))
+		return;
 
 	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
 
@@ -157,6 +161,10 @@ void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
 			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
 	}
 
+	if (host_map)
+		for (i = 0; host_map[i] != -1; i++)
+			cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i));
+
 	/* Set up genirq dispatching for cp_intc */
 	for (i = 0; i < num_irq; i++) {
 		set_irq_chip(i, &cp_intc_irq_chip);
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 97a90f3..bd59f31 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,6 +19,7 @@
 #include <asm/proc-fns.h>
 
 #include <mach/cpuidle.h>
+#include <mach/memory.h>
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
@@ -39,10 +40,6 @@ static struct cpuidle_driver davinci_idle_driver = {
 static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
 static void __iomem *ddr2_reg_base;
 
-#define DDR2_SDRCR_OFFSET	0xc
-#define DDR2_SRPD_BIT		BIT(23)
-#define DDR2_LPMODEN_BIT	BIT(31)
-
 static void davinci_save_ddr_power(int enter, bool pdown)
 {
 	u32 val;
@@ -109,8 +106,6 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 	int ret;
 	struct cpuidle_device *device;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
-	struct resource *ddr2_regs;
-	resource_size_t len;
 
 	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
 
@@ -119,28 +114,12 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!ddr2_regs) {
-		dev_err(&pdev->dev, "cannot get DDR2 controller register base");
-		return -ENODEV;
-	}
-
-	len = resource_size(ddr2_regs);
-
-	ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
-	if (!ddr2_regs)
-		return -EBUSY;
-
-	ddr2_reg_base = ioremap(ddr2_regs->start, len);
-	if (!ddr2_reg_base) {
-		ret = -ENOMEM;
-		goto ioremap_fail;
-	}
+	ddr2_reg_base = pdata->ddr2_ctlr_base;
 
 	ret = cpuidle_register_driver(&davinci_idle_driver);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register driver\n");
-		goto driver_register_fail;
+		return ret;
 	}
 
 	/* Wait for interrupt state */
@@ -167,18 +146,11 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 	ret = cpuidle_register_device(device);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register device\n");
-		goto device_register_fail;
+		cpuidle_unregister_driver(&davinci_idle_driver);
+		return ret;
 	}
 
 	return 0;
-
-device_register_fail:
-	cpuidle_unregister_driver(&davinci_idle_driver);
-driver_register_fail:
-	iounmap(ddr2_reg_base);
-ioremap_fail:
-	release_mem_region(ddr2_regs->start, len);
-	return ret;
 }
 
 static struct platform_driver davinci_cpuidle_driver = {
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index b22b5cf..23e9eda 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -19,6 +19,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/gpio.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -371,7 +372,7 @@ static struct clk rmii_clk = {
 	.parent		= &pll0_sysclk7,
 };
 
-static struct davinci_clk da830_clks[] = {
+static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
 	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
@@ -410,7 +411,7 @@ static struct davinci_clk da830_clks[] = {
 	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
 	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
 	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
-	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
@@ -1126,10 +1127,7 @@ static struct map_desc da830_io_desc[] = {
 	},
 };
 
-static void __iomem *da830_psc_bases[] = {
-	IO_ADDRESS(DA8XX_PSC0_BASE),
-	IO_ADDRESS(DA8XX_PSC1_BASE),
-};
+static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id da830_ids[] = {
@@ -1158,14 +1156,14 @@ static struct davinci_id da830_ids[] = {
 
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.base		= DA8XX_TIMER64P0_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 		.cmp_off	= DA830_CMP12_0,
 		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.base		= DA8XX_TIMER64P1_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 		.cmp_off	= DA830_CMP12_0,
@@ -1187,34 +1185,33 @@ static struct davinci_timer_info da830_timer_info = {
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
 	.psc_bases		= da830_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_base		= DA8XX_CP_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 128,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
+	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da830_init(void)
 {
-	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
-	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
-		return;
-
-	davinci_soc_info_da830.jtag_id_base =
-					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
-	davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
-
 	davinci_common_init(&davinci_soc_info_da830);
+
+	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
 }
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 717806c..6b8331b 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -26,6 +26,8 @@
 #include <mach/time.h>
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
+#include <mach/pm.h>
+#include <mach/gpio.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -40,6 +42,7 @@
 #define DA850_REF_FREQ		24000000
 
 #define CFGCHIP3_ASYNC3_CLKSRC	BIT(4)
+#define CFGCHIP3_PLL1_MASTER_LOCK	BIT(5)
 #define CFGCHIP0_PLL_MASTER_LOCK	BIT(4)
 
 static int da850_set_armrate(struct clk *clk, unsigned long rate);
@@ -333,7 +336,7 @@ static struct clk aemif_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
-static struct davinci_clk da850_clks[] = {
+static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
 	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
@@ -535,6 +538,7 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
+	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
 #endif
 };
 
@@ -770,12 +774,15 @@ static struct map_desc da850_io_desc[] = {
 		.length		= DA8XX_CP_INTC_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_ARM_RAM_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE
+	},
 };
 
-static void __iomem *da850_psc_bases[] = {
-	IO_ADDRESS(DA8XX_PSC0_BASE),
-	IO_ADDRESS(DA8XX_PSC1_BASE),
-};
+static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id da850_ids[] = {
@@ -790,22 +797,22 @@ static struct davinci_id da850_ids[] = {
 
 static struct davinci_timer_instance da850_timer_instance[4] = {
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.base		= DA8XX_TIMER64P0_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.base		= DA8XX_TIMER64P1_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 	},
 	{
-		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.base		= DA850_TIMER64P2_BASE,
 		.bottom_irq	= IRQ_DA850_TINT12_2,
 		.top_irq	= IRQ_DA850_TINT34_2,
 	},
 	{
-		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.base		= DA850_TIMER64P3_BASE,
 		.bottom_irq	= IRQ_DA850_TINT12_3,
 		.top_irq	= IRQ_DA850_TINT34_3,
 	},
@@ -825,12 +832,12 @@ static struct davinci_timer_info da850_timer_info = {
 static void da850_set_async3_src(int pllnum)
 {
 	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
-	struct davinci_clk *c;
+	struct clk_lookup *c;
 	unsigned int v;
 	int ret;
 
-	for (c = da850_clks; c->lk.clk; c++) {
-		clk = c->lk.clk;
+	for (c = da850_clks; c->clk; c++) {
+		clk = c->clk;
 		if (clk->flags & DA850_CLK_ASYNC3) {
 			ret = clk_set_parent(clk, newparent);
 			WARN(ret, "DA850: unable to re-parent clock %s",
@@ -838,12 +845,12 @@ static void da850_set_async3_src(int pllnum)
 		}
        }
 
-	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 	if (pllnum)
 		v |= CFGCHIP3_ASYNC3_CLKSRC;
 	else
 		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
-	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 }
 
 #ifdef CONFIG_CPU_FREQ
@@ -987,7 +994,6 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
 	unsigned int prediv, mult, postdiv;
 	struct da850_opp *opp;
 	struct pll_data *pll = clk->pll_data;
-	unsigned int v;
 	int ret;
 
 	opp = (struct da850_opp *) da850_freq_table[index].index;
@@ -995,11 +1001,6 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
 	mult = opp->mult;
 	postdiv = opp->postdiv;
 
-	/* Unlock writing to PLL registers */
-	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
-	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
-	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
-
 	ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
 	if (WARN_ON(ret))
 		return ret;
@@ -1028,41 +1029,86 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
 }
 #endif
 
+int da850_register_pm(struct platform_device *pdev)
+{
+	int ret;
+	struct davinci_pm_config *pdata = pdev->dev.platform_data;
+
+	ret = davinci_cfg_reg(DA850_RTC_ALARM);
+	if (ret)
+		return ret;
+
+	pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr();
+	pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG);
+	pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C;
+
+	pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K);
+	if (!pdata->cpupll_reg_base)
+		return -ENOMEM;
+
+	pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K);
+	if (!pdata->ddrpll_reg_base) {
+		ret = -ENOMEM;
+		goto no_ddrpll_mem;
+	}
+
+	pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K);
+	if (!pdata->ddrpsc_reg_base) {
+		ret = -ENOMEM;
+		goto no_ddrpsc_mem;
+	}
+
+	return platform_device_register(pdev);
+
+no_ddrpsc_mem:
+	iounmap(pdata->ddrpll_reg_base);
+no_ddrpll_mem:
+	iounmap(pdata->cpupll_reg_base);
+	return ret;
+}
 
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da850_ids,
 	.ids_num		= ARRAY_SIZE(da850_ids),
 	.cpu_clks		= da850_clks,
 	.psc_bases		= da850_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_base		= DA8XX_CP_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 144,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
+	.sram_dma		= DA8XX_ARM_RAM_BASE,
+	.sram_len		= SZ_8K,
+	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da850_init(void)
 {
-	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
-	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
-		return;
-
-	davinci_soc_info_da850.jtag_id_base =
-					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
-	davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+	unsigned int v;
 
 	davinci_common_init(&davinci_soc_info_da850);
 
+	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
+		return;
+
+	da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
+		return;
+
 	/*
 	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
 	 * This helps keeping the peripherals on this domain insulated
@@ -1071,4 +1117,14 @@ void __init da850_init(void)
 	 * be any noticible change even in non-DVFS use cases.
 	 */
 	da850_set_async3_src(1);
+
+	/* Unlock writing to PLL0 registers */
+	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
+	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
+	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
+
+	/* Unlock writing to PLL1 registers */
+	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+	v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
+	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 }
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index a5105f0..8cda729 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,8 +24,10 @@
 #include "clock.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000
+#define DA850_TPCC1_BASE		0x01e30000
 #define DA8XX_TPTC0_BASE		0x01c08000
 #define DA8XX_TPTC1_BASE		0x01c08400
+#define DA850_TPTC2_BASE		0x01e38000
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
 #define DA8XX_RTC_BASE			0x01C23000
@@ -42,7 +44,8 @@
 #define DA8XX_MDIO_REG_OFFSET		0x4000
 #define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
 
-void __iomem *da8xx_syscfg_base;
+void __iomem *da8xx_syscfg0_base;
+void __iomem *da8xx_syscfg1_base;
 
 static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	{
@@ -82,11 +85,6 @@ struct platform_device da8xx_serial_device = {
 	},
 };
 
-static const s8 da8xx_dma_chan_no_event[] = {
-	20, 21,
-	-1
-};
-
 static const s8 da8xx_queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
 	{0, 0},
@@ -101,20 +99,52 @@ static const s8 da8xx_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da8xx_edma_info[] = {
+static const s8 da850_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{-1, -1}
+};
+
+static const s8 da850_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{-1, -1}
+};
+
+static struct edma_soc_info da830_edma_info[] = {
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.queue_tc_mapping	= da8xx_queue_tc_mapping,
+		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	},
+};
+
+static struct edma_soc_info da850_edma_info[] = {
 	{
 		.n_channel		= 32,
 		.n_region		= 4,
 		.n_slot			= 128,
 		.n_tc			= 2,
 		.n_cc			= 1,
-		.noevent		= da8xx_dma_chan_no_event,
 		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	},
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 1,
+		.n_cc			= 1,
+		.queue_tc_mapping	= da850_queue_tc_mapping,
+		.queue_priority_mapping	= da850_queue_priority_mapping,
+	},
 };
 
-static struct resource da8xx_edma_resources[] = {
+static struct resource da830_edma_resources[] = {
 	{
 		.name	= "edma_cc0",
 		.start	= DA8XX_TPCC_BASE,
@@ -145,19 +175,91 @@ static struct resource da8xx_edma_resources[] = {
 	},
 };
 
-static struct platform_device da8xx_edma_device = {
+static struct resource da850_edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= DA8XX_TPCC_BASE,
+		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= DA8XX_TPTC0_BASE,
+		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= DA8XX_TPTC1_BASE,
+		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_cc1",
+		.start	= DA850_TPCC1_BASE,
+		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= DA850_TPTC2_BASE,
+		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_DA8XX_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_DA8XX_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma1",
+		.start	= IRQ_DA850_CCINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma1_err",
+		.start	= IRQ_DA850_CCERRINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da830_edma_device = {
 	.name		= "edma",
 	.id		= -1,
 	.dev = {
-		.platform_data	= da8xx_edma_info,
+		.platform_data = da830_edma_info,
 	},
-	.num_resources	= ARRAY_SIZE(da8xx_edma_resources),
-	.resource	= da8xx_edma_resources,
+	.num_resources	= ARRAY_SIZE(da830_edma_resources),
+	.resource	= da830_edma_resources,
+};
+
+static struct platform_device da850_edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.dev = {
+		.platform_data = da850_edma_info,
+	},
+	.num_resources	= ARRAY_SIZE(da850_edma_resources),
+	.resource	= da850_edma_resources,
 };
 
 int __init da8xx_register_edma(void)
 {
-	return platform_device_register(&da8xx_edma_device);
+	struct platform_device *pdev;
+
+	if (cpu_is_davinci_da830())
+		pdev = &da830_edma_device;
+	else if (cpu_is_davinci_da850())
+		pdev = &da850_edma_device;
+	else
+		return -ENODEV;
+
+	return platform_device_register(pdev);
 }
 
 static struct resource da8xx_i2c_resources0[] = {
@@ -224,7 +326,7 @@ static struct resource da8xx_watchdog_resources[] = {
 	},
 };
 
-struct platform_device davinci_wdt_device = {
+struct platform_device da8xx_wdt_device = {
 	.name		= "watchdog",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
@@ -233,7 +335,7 @@ struct platform_device davinci_wdt_device = {
 
 int __init da8xx_register_watchdog(void)
 {
-	return platform_device_register(&davinci_wdt_device);
+	return platform_device_register(&da8xx_wdt_device);
 }
 
 static struct resource da8xx_emac_resources[] = {
@@ -482,10 +584,17 @@ static struct platform_device da8xx_rtc_device = {
 int da8xx_register_rtc(void)
 {
 	int ret;
+	void __iomem *base;
+
+	base = ioremap(DA8XX_RTC_BASE, SZ_4K);
+	if (WARN_ON(!base))
+		return -ENOMEM;
 
 	/* Unlock the rtc's registers */
-	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
-	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
+	__raw_writel(0x83e70b13, base + 0x6c);
+	__raw_writel(0x95a4f1e0, base + 0x70);
+
+	iounmap(base);
 
 	ret = platform_device_register(&da8xx_rtc_device);
 	if (!ret)
@@ -495,6 +604,19 @@ int da8xx_register_rtc(void)
 	return ret;
 }
 
+static void __iomem *da8xx_ddr2_ctlr_base;
+void __iomem * __init da8xx_get_mem_ctlr(void)
+{
+	if (da8xx_ddr2_ctlr_base)
+		return da8xx_ddr2_ctlr_base;
+
+	da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K);
+	if (!da8xx_ddr2_ctlr_base)
+		pr_warning("%s: Unable to map DDR2 controller",	__func__);
+
+	return da8xx_ddr2_ctlr_base;
+}
+
 static struct resource da8xx_cpuidle_resources[] = {
 	{
 		.start		= DA8XX_DDR2_CTL_BASE,
@@ -520,6 +642,7 @@ static struct platform_device da8xx_cpuidle_device = {
 
 int __init da8xx_register_cpuidle(void)
 {
+	da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
+
 	return platform_device_register(&da8xx_cpuidle_device);
 }
-
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 1479496..8b7201e 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -23,7 +23,10 @@
 #include <mach/mmc.h>
 #include <mach/time.h>
 
+#include "clock.h"
+
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_ATA_BASE	     0x01C66000
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
@@ -58,6 +61,49 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+static struct resource ide_resources[] = {
+	{
+		.start		= DAVINCI_ATA_BASE,
+		.end		= DAVINCI_ATA_BASE + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_IDE,
+		.end		= IRQ_IDE,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_device = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
+void __init davinci_init_ide(void)
+{
+	if (cpu_is_davinci_dm644x()) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+	} else if (cpu_is_davinci_dm646x()) {
+		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
+		davinci_cfg_reg(DM646X_ATAEN);
+	} else {
+		WARN_ON(1);
+		return;
+	}
+
+	platform_device_register(&ide_device);
+}
+
 #if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
 
 static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
@@ -251,12 +297,12 @@ static void davinci_init_wdt(void)
 
 struct davinci_timer_instance davinci_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.base		= DAVINCI_TIMER0_BASE,
 		.bottom_irq	= IRQ_TINT0_TINT12,
 		.top_irq	= IRQ_TINT0_TINT34,
 	},
 	{
-		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.base		= DAVINCI_TIMER1_BASE,
 		.bottom_irq	= IRQ_TINT1_TINT12,
 		.top_irq	= IRQ_TINT1_TINT34,
 	},
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index dedf4d4..3834781 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -29,6 +29,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/spi.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -125,7 +126,6 @@ static struct clk vpss_slave_clk = {
 	.lpsc = DAVINCI_LPSC_VPSSSLV,
 };
 
-
 static struct clk clkout1_clk = {
 	.name = "clkout1",
 	.parent = &pll1_aux_clk,
@@ -335,7 +335,7 @@ static struct clk usb_clk = {
 	.lpsc = DAVINCI_LPSC_USB,
 };
 
-static struct davinci_clk dm355_clks[] = {
+static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "pll1", &pll1_clk),
 	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
@@ -363,9 +363,9 @@ static struct davinci_clk dm355_clks[] = {
 	CLK("davinci-asp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
-	CLK(NULL, "spi0", &spi0_clk),
-	CLK(NULL, "spi1", &spi1_clk),
-	CLK(NULL, "spi2", &spi2_clk),
+	CLK("spi_davinci.0", NULL, &spi0_clk),
+	CLK("spi_davinci.1", NULL, &spi1_clk),
+	CLK("spi_davinci.2", NULL, &spi2_clk),
 	CLK(NULL, "gpio", &gpio_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
@@ -392,24 +392,40 @@ static struct resource dm355_spi0_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = IRQ_DM355_SPINT0_1,
+		.start = IRQ_DM355_SPINT0_0,
 		.flags = IORESOURCE_IRQ,
 	},
-	/* Not yet used, so not included:
-	 * IORESOURCE_IRQ:
-	 *  - IRQ_DM355_SPINT0_0
-	 * IORESOURCE_DMA:
-	 *  - DAVINCI_DMA_SPI_SPIX
-	 *  - DAVINCI_DMA_SPI_SPIR
-	 */
+	{
+		.start = 17,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = 16,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = EVENTQ_1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
+static struct davinci_spi_platform_data dm355_spi0_pdata = {
+	.version 	= SPI_VERSION_1,
+	.num_chipselect = 2,
+	.clk_internal	= 1,
+	.cs_hold	= 1,
+	.intr_level	= 0,
+	.poll_mode	= 1,	/* 0 -> interrupt mode 1-> polling mode */
+	.c2tdelay	= 0,
+	.t2cdelay	= 0,
+};
 static struct platform_device dm355_spi0_device = {
 	.name = "spi_davinci",
 	.id = 0,
 	.dev = {
 		.dma_mask = &dm355_spi0_dma_mask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &dm355_spi0_pdata,
 	},
 	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
 	.resource = dm355_spi0_resources,
@@ -434,11 +450,6 @@ void __init dm355_init_spi0(unsigned chipselect_mask,
 
 /*----------------------------------------------------------------------*/
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-#define PINMUX2		0x08
-#define PINMUX3		0x0c
-#define PINMUX4		0x10
 #define INTMUX		0x18
 #define EVTMUX		0x1c
 
@@ -564,13 +575,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static const s8 dma_chan_dm355_no_event[] = {
-	12, 13, 24, 56, 57,
-	58, 59, 60, 61, 62,
-	63,
-	-1
-};
-
 static const s8
 queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
@@ -594,7 +598,6 @@ static struct edma_soc_info dm355_edma_info[] = {
 		.n_slot			= 128,
 		.n_tc			= 2,
 		.n_cc			= 1,
-		.noevent		= dma_chan_dm355_no_event,
 		.queue_tc_mapping	= queue_tc_mapping,
 		.queue_priority_mapping	= queue_priority_mapping,
 	},
@@ -665,6 +668,17 @@ static struct platform_device dm355_asp1_device = {
 	.resource	= dm355_asp1_resources,
 };
 
+static void dm355_ccdc_setup_pinmux(void)
+{
+	davinci_cfg_reg(DM355_VIN_PCLK);
+	davinci_cfg_reg(DM355_VIN_CAM_WEN);
+	davinci_cfg_reg(DM355_VIN_CAM_VD);
+	davinci_cfg_reg(DM355_VIN_CAM_HD);
+	davinci_cfg_reg(DM355_VIN_YIN_EN);
+	davinci_cfg_reg(DM355_VIN_CINL_EN);
+	davinci_cfg_reg(DM355_VIN_CINH_EN);
+}
+
 static struct resource dm355_vpss_resources[] = {
 	{
 		/* VPSS BL Base address */
@@ -701,6 +715,10 @@ static struct resource vpfe_resources[] = {
 		.end            = IRQ_VDINT1,
 		.flags          = IORESOURCE_IRQ,
 	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm355_ccdc_resource[] = {
 	/* CCDC Base address */
 	{
 		.flags          = IORESOURCE_MEM,
@@ -708,8 +726,18 @@ static struct resource vpfe_resources[] = {
 		.end            = 0x01c70600 + 0x1ff,
 	},
 };
+static struct platform_device dm355_ccdc_dev = {
+	.name           = "dm355_ccdc",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
+	.resource       = dm355_ccdc_resource,
+	.dev = {
+		.dma_mask               = &vpfe_capture_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data		= dm355_ccdc_setup_pinmux,
+	},
+};
 
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
 static struct platform_device vpfe_capture_dev = {
 	.name		= CAPTURE_DRV_NAME,
 	.id		= -1,
@@ -755,9 +783,7 @@ static struct davinci_id dm355_ids[] = {
 	},
 };
 
-static void __iomem *dm355_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -765,7 +791,7 @@ static void __iomem *dm355_psc_bases[] = {
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm355_timer_info = {
+static struct davinci_timer_info dm355_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -812,26 +838,28 @@ static struct platform_device dm355_serial_device = {
 static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.io_desc		= dm355_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm355_ids,
 	.ids_num		= ARRAY_SIZE(dm355_ids),
 	.cpu_clks		= dm355_clks,
 	.psc_bases		= dm355_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm355_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
 	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
@@ -857,20 +885,13 @@ static int __init dm355_init_devices(void)
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
+	/* Add ccdc clock aliases */
+	clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
+	clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
 	platform_device_register(&dm355_vpss_device);
-	/*
-	 * setup Mux configuration for vpfe input and register
-	 * vpfe capture platform device
-	 */
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
+	platform_device_register(&dm355_ccdc_dev);
 	platform_device_register(&vpfe_capture_dev);
 
 	return 0;
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f53735c..a146849 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/spi/spi.h>
 
 #include <asm/mach/map.h>
 
@@ -32,6 +33,8 @@
 #include <mach/common.h>
 #include <mach/asp.h>
 #include <mach/keyscan.h>
+#include <mach/spi.h>
+
 
 #include "clock.h"
 #include "mux.h"
@@ -403,7 +406,7 @@ static struct clk mjcp_clk = {
 	.lpsc		= DM365_LPSC_MJCP,
 };
 
-static struct davinci_clk dm365_clks[] = {
+static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "pll1", &pll1_clk),
 	CLK(NULL, "pll1_aux", &pll1_aux_clk),
@@ -455,7 +458,7 @@ static struct davinci_clk dm365_clks[] = {
 	CLK(NULL, "timer3", &timer3_clk),
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
-	CLK("voice_codec", NULL, &voicecodec_clk),
+	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
 	CLK("davinci-asp.0", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
@@ -464,11 +467,6 @@ static struct davinci_clk dm365_clks[] = {
 
 /*----------------------------------------------------------------------*/
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-#define PINMUX2		0x08
-#define PINMUX3		0x0c
-#define PINMUX4		0x10
 #define INTMUX		0x18
 #define EVTMUX		0x1c
 
@@ -487,11 +485,14 @@ MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
 MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
 MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
 
-MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
 MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
+MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
 
 MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
 MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
@@ -570,9 +571,17 @@ MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
 MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
 MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
 
+MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
+MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
+MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
+
 MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
+MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
+MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
 MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
 MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
 
 MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
 MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
@@ -606,9 +615,78 @@ INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
 
 EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
 EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
+EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
+EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
 #endif
 };
 
+static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct davinci_spi_platform_data dm365_spi0_pdata = {
+	.version 	= SPI_VERSION_1,
+	.num_chipselect = 2,
+	.clk_internal	= 1,
+	.cs_hold	= 1,
+	.intr_level	= 0,
+	.poll_mode	= 1,	/* 0 -> interrupt mode 1-> polling mode */
+	.c2tdelay	= 0,
+	.t2cdelay	= 0,
+};
+
+static struct resource dm365_spi0_resources[] = {
+	{
+		.start = 0x01c66000,
+		.end   = 0x01c667ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM365_SPIINT0_0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = 17,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = 16,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = EVENTQ_3,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm365_spi0_device = {
+	.name = "spi_davinci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &dm365_spi0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &dm365_spi0_pdata,
+	},
+	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
+	.resource = dm365_spi0_resources,
+};
+
+void __init dm365_init_spi0(unsigned chipselect_mask,
+		struct spi_board_info *info, unsigned len)
+{
+	davinci_cfg_reg(DM365_SPI0_SCLK);
+	davinci_cfg_reg(DM365_SPI0_SDI);
+	davinci_cfg_reg(DM365_SPI0_SDO);
+
+	/* not all slaves will be wired up */
+	if (chipselect_mask & BIT(0))
+		davinci_cfg_reg(DM365_SPI0_SDENA0);
+	if (chipselect_mask & BIT(1))
+		davinci_cfg_reg(DM365_SPI0_SDENA1);
+
+	spi_register_board_info(info, len);
+
+	platform_device_register(&dm365_spi0_device);
+}
+
 static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -686,7 +764,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_MMCINT]			= 7,
 	[IRQ_DM365_MMCINT1]		= 7,
 	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 4,
 	[IRQ_AEMIFINT]			= 2,
 	[IRQ_DM365_SDIOINT1]		= 2,
 	[IRQ_TINT0_TINT12]		= 7,
@@ -754,7 +831,7 @@ static struct edma_soc_info dm365_edma_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= dm365_queue_tc_mapping,
 		.queue_priority_mapping	= dm365_queue_priority_mapping,
-		.default_queue		= EVENTQ_2,
+		.default_queue		= EVENTQ_3,
 	},
 };
 
@@ -835,6 +912,31 @@ static struct platform_device dm365_asp_device = {
 	.resource	= dm365_asp_resources,
 };
 
+static struct resource dm365_vc_resources[] = {
+	{
+		.start	= DAVINCI_DM365_VC_BASE,
+		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_VC_TX,
+		.end	= DAVINCI_DMA_VC_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_VC_RX,
+		.end	= DAVINCI_DMA_VC_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm365_vc_device = {
+	.name		= "davinci_voicecodec",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
+	.resource	= dm365_vc_resources,
+};
+
 static struct resource dm365_rtc_resources[] = {
 	{
 		.start = DM365_RTC_BASE,
@@ -910,11 +1012,9 @@ static struct davinci_id dm365_ids[] = {
 	},
 };
 
-static void __iomem *dm365_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
-struct davinci_timer_info dm365_timer_info = {
+static struct davinci_timer_info dm365_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -953,21 +1053,22 @@ static struct platform_device dm365_serial_device = {
 static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.io_desc		= dm365_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm365_ids,
 	.ids_num		= ARRAY_SIZE(dm365_ids),
 	.cpu_clks		= dm365_clks,
 	.psc_bases		= dm365_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm365_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM365_GPIO0,
 	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
@@ -975,6 +1076,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm365_init_asp(struct snd_platform_data *pdata)
@@ -991,6 +1093,14 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 	platform_device_register(&dm365_asp_device);
 }
 
+void __init dm365_init_vc(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM365_EVT2_VC_TX);
+	davinci_cfg_reg(DM365_EVT3_VC_RX);
+	dm365_vc_device.dev.platform_data = pdata;
+	platform_device_register(&dm365_vc_device);
+}
+
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
 {
 	dm365_ks_device.dev.platform_data = pdata;
@@ -1008,6 +1118,97 @@ void __init dm365_init(void)
 	davinci_common_init(&davinci_soc_info_dm365);
 }
 
+static struct resource dm365_vpss_resources[] = {
+	{
+		/* VPSS ISP5 Base address */
+		.name           = "isp5",
+		.start          = 0x01c70000,
+		.end            = 0x01c70000 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		/* VPSS CLK Base address */
+		.name           = "vpss",
+		.start          = 0x01c70200,
+		.end            = 0x01c70200 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm365_vpss_device = {
+       .name                   = "vpss",
+       .id                     = -1,
+       .dev.platform_data      = "dm365_vpss",
+       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
+       .resource               = dm365_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name           = CAPTURE_DRV_NAME,
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(vpfe_resources),
+	.resource       = vpfe_resources,
+	.dev = {
+		.dma_mask               = &vpfe_capture_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
+static void dm365_isif_setup_pinmux(void)
+{
+	davinci_cfg_reg(DM365_VIN_CAM_WEN);
+	davinci_cfg_reg(DM365_VIN_CAM_VD);
+	davinci_cfg_reg(DM365_VIN_CAM_HD);
+	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
+	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
+}
+
+static struct resource isif_resource[] = {
+	/* ISIF Base address */
+	{
+		.start          = 0x01c71000,
+		.end            = 0x01c71000 + 0x1ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	/* ISIF Linearization table 0 */
+	{
+		.start          = 0x1C7C000,
+		.end            = 0x1C7C000 + 0x2ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	/* ISIF Linearization table 1 */
+	{
+		.start          = 0x1C7C400,
+		.end            = 0x1C7C400 + 0x2ff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+static struct platform_device dm365_isif_dev = {
+	.name           = "isif",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(isif_resource),
+	.resource       = isif_resource,
+	.dev = {
+		.dma_mask               = &vpfe_capture_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data		= dm365_isif_setup_pinmux,
+	},
+};
+
 static int __init dm365_init_devices(void)
 {
 	if (!cpu_is_davinci_dm365())
@@ -1016,7 +1217,16 @@ static int __init dm365_init_devices(void)
 	davinci_cfg_reg(DM365_INT_EDMA_CC);
 	platform_device_register(&dm365_edma_device);
 	platform_device_register(&dm365_emac_device);
-
+	/* Add isif clock alias */
+	clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
+	platform_device_register(&dm365_vpss_device);
+	platform_device_register(&dm365_isif_dev);
+	platform_device_register(&vpfe_capture_dev);
 	return 0;
 }
 postcore_initcall(dm365_init_devices);
+
+void dm365_set_vpfe_config(struct vpfe_config *cfg)
+{
+       vpfe_capture_dev.dev.platform_data = cfg;
+}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 2cd0081..7ad1520 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -277,7 +277,7 @@ static struct clk timer2_clk = {
 	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
 };
 
-struct davinci_clk dm644x_clks[] = {
+static struct clk_lookup dm644x_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "pll1", &pll1_clk),
 	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
@@ -350,9 +350,6 @@ static struct platform_device dm644x_emac_device = {
        .resource	= dm644x_emac_resources,
 };
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-
 /*
  * Device specific mux setup
  *
@@ -479,15 +476,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static const s8 dma_chan_dm644x_no_event[] = {
-	 0,  1, 12, 13, 14,
-	15, 25, 30, 31, 45,
-	46, 47, 55, 56, 57,
-	58, 59, 60, 61, 62,
-	63,
-	-1
-};
-
 static const s8
 queue_tc_mapping[][2] = {
 	/* {event queue no, TC no} */
@@ -511,7 +499,6 @@ static struct edma_soc_info dm644x_edma_info[] = {
 		.n_slot			= 128,
 		.n_tc			= 2,
 		.n_cc			= 1,
-		.noevent		= dma_chan_dm644x_no_event,
 		.queue_tc_mapping	= queue_tc_mapping,
 		.queue_priority_mapping	= queue_priority_mapping,
 	},
@@ -612,6 +599,11 @@ static struct resource vpfe_resources[] = {
 		.end            = IRQ_VDINT1,
 		.flags          = IORESOURCE_IRQ,
 	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct resource dm644x_ccdc_resource[] = {
+	/* CCDC Base address */
 	{
 		.start          = 0x01c70400,
 		.end            = 0x01c70400 + 0xff,
@@ -619,7 +611,17 @@ static struct resource vpfe_resources[] = {
 	},
 };
 
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device dm644x_ccdc_dev = {
+	.name           = "dm644x_ccdc",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
+	.resource       = dm644x_ccdc_resource,
+	.dev = {
+		.dma_mask               = &vpfe_capture_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
 static struct platform_device vpfe_capture_dev = {
 	.name		= CAPTURE_DRV_NAME,
 	.id		= -1,
@@ -672,9 +674,7 @@ static struct davinci_id dm644x_ids[] = {
 	},
 };
 
-static void __iomem *dm644x_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -682,7 +682,7 @@ static void __iomem *dm644x_psc_bases[] = {
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm644x_timer_info = {
+static struct davinci_timer_info dm644x_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -729,27 +729,29 @@ static struct platform_device dm644x_serial_device = {
 static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.io_desc		= dm644x_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm644x_ids,
 	.ids_num		= ARRAY_SIZE(dm644x_ids),
 	.cpu_clks		= dm644x_clks,
 	.psc_bases		= dm644x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm644x_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
 	.serial_dev		= &dm644x_serial_device,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm644x_init_asp(struct snd_platform_data *pdata)
@@ -769,9 +771,13 @@ static int __init dm644x_init_devices(void)
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
+	/* Add ccdc clock aliases */
+	clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
+	clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
 	platform_device_register(&dm644x_edma_device);
 	platform_device_register(&dm644x_emac_device);
 	platform_device_register(&dm644x_vpss_device);
+	platform_device_register(&dm644x_ccdc_dev);
 	platform_device_register(&vpfe_capture_dev);
 
 	return 0;
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 829a44b..9404565 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -42,7 +42,6 @@
 /*
  * Device specific clocks
  */
-#define DM646X_REF_FREQ		27000000
 #define DM646X_AUX_FREQ		24000000
 
 static struct pll_data pll1_data = {
@@ -57,7 +56,6 @@ static struct pll_data pll2_data = {
 
 static struct clk ref_clk = {
 	.name = "ref_clk",
-	.rate = DM646X_REF_FREQ,
 };
 
 static struct clk aux_clkin = {
@@ -313,7 +311,7 @@ static struct clk vpif1_clk = {
 	.flags = ALWAYS_ENABLED,
 };
 
-struct davinci_clk dm646x_clks[] = {
+static struct clk_lookup dm646x_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "aux", &aux_clkin),
 	CLK(NULL, "pll1", &pll1_clk),
@@ -403,9 +401,6 @@ static struct platform_device dm646x_emac_device = {
 	.resource	= dm646x_emac_resources,
 };
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-
 /*
  * Device specific mux setup
  *
@@ -513,14 +508,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static const s8 dma_chan_dm646x_no_event[] = {
-	 0,  1,  2,  3, 13,
-	14, 15, 24, 25, 26,
-	27, 30, 31, 54, 55,
-	56,
-	-1
-};
-
 /* Four Transfer Controllers on DM646x */
 static const s8
 dm646x_queue_tc_mapping[][2] = {
@@ -549,7 +536,6 @@ static struct edma_soc_info dm646x_edma_info[] = {
 		.n_slot			= 512,
 		.n_tc			= 4,
 		.n_cc			= 1,
-		.noevent		= dma_chan_dm646x_no_event,
 		.queue_tc_mapping	= dm646x_queue_tc_mapping,
 		.queue_priority_mapping	= dm646x_queue_priority_mapping,
 	},
@@ -607,32 +593,6 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start          = DM646X_ATA_REG_BASE,
-		.end            = DM646X_ATA_REG_BASE + 0x7ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = IRQ_DM646X_IDE,
-		.end            = IRQ_DM646X_IDE,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
 static struct resource dm646x_mcasp0_resources[] = {
 	{
 		.name	= "mcasp0",
@@ -798,9 +758,7 @@ static struct davinci_id dm646x_ids[] = {
 	},
 };
 
-static void __iomem *dm646x_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -808,7 +766,7 @@ static void __iomem *dm646x_psc_bases[] = {
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm646x_timer_info = {
+static struct davinci_timer_info dm646x_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -855,35 +813,31 @@ static struct platform_device dm646x_serial_device = {
 static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.io_desc		= dm646x_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm646x_ids,
 	.ids_num		= ARRAY_SIZE(dm646x_ids),
 	.cpu_clks		= dm646x_clks,
 	.psc_bases		= dm646x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm646x_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
 	.serial_dev		= &dm646x_serial_device,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
-void __init dm646x_init_ide()
-{
-	davinci_cfg_reg(DM646X_ATAEN);
-	platform_device_register(&ide_dev);
-}
-
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
 {
 	dm646x_mcasp0_device.dev.platform_data = pdata;
@@ -925,6 +879,7 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 
 void __init dm646x_init(void)
 {
+	dm646x_board_setup_refclk(&ref_clk);
 	davinci_common_init(&davinci_soc_info_dm646x);
 }
 
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 648fbb7..d33827a 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/edma.h>
 
@@ -226,11 +227,11 @@ struct edma {
 	 */
 	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
 
-	/* The edma_noevent bit for each channel is clear unless
-	 * it doesn't trigger DMA events on this platform.  It uses a
-	 * bit of SOC-specific initialization code.
+	/* The edma_unused bit for each channel is clear unless
+	 * it is not being used on this platform. It uses a bit
+	 * of SOC-specific initialization code.
 	 */
-	DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
 
 	unsigned	irq_res_start;
 	unsigned	irq_res_end;
@@ -242,7 +243,8 @@ struct edma {
 	} intr_data[EDMA_MAX_DMACH];
 };
 
-static struct edma *edma_info[EDMA_MAX_CC];
+static struct edma *edma_cc[EDMA_MAX_CC];
+static int arch_num_cc;
 
 /* dummy param set used to (re)initialize parameter RAM slots */
 static const struct edmacc_param dummy_paramset = {
@@ -259,7 +261,7 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 
 	/* default to low priority queue */
 	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_info[ctlr]->default_queue;
+		queue_no = edma_cc[ctlr]->default_queue;
 
 	queue_no &= 7;
 	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
@@ -308,29 +310,27 @@ setup_dma_interrupt(unsigned lch,
 	ctlr = EDMA_CTLR(lch);
 	lch = EDMA_CHAN_SLOT(lch);
 
-	if (!callback) {
+	if (!callback)
 		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				(1 << (lch & 0x1f)));
-	}
+				BIT(lch & 0x1f));
 
-	edma_info[ctlr]->intr_data[lch].callback = callback;
-	edma_info[ctlr]->intr_data[lch].data = data;
+	edma_cc[ctlr]->intr_data[lch].callback = callback;
+	edma_cc[ctlr]->intr_data[lch].data = data;
 
 	if (callback) {
 		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				(1 << (lch & 0x1f)));
+				BIT(lch & 0x1f));
 		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				(1 << (lch & 0x1f)));
+				BIT(lch & 0x1f));
 	}
 }
 
 static int irq2ctlr(int irq)
 {
-	if (irq >= edma_info[0]->irq_res_start &&
-		irq <= edma_info[0]->irq_res_end)
+	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
 		return 0;
-	else if (irq >= edma_info[1]->irq_res_start &&
-		irq <= edma_info[1]->irq_res_end)
+	else if (irq >= edma_cc[1]->irq_res_start &&
+		irq <= edma_cc[1]->irq_res_end)
 		return 1;
 
 	return -1;
@@ -351,15 +351,17 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0)
-	    && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
+	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
+	    (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j;
-		if (edma_shadow0_read_array(ctlr, SH_IPR, 0))
+		if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
+				edma_shadow0_read_array(ctlr, SH_IER, 0))
 			j = 0;
-		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1))
+		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
+				edma_shadow0_read_array(ctlr, SH_IER, 1))
 			j = 1;
 		else
 			break;
@@ -367,17 +369,17 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 				edma_shadow0_read_array(ctlr, SH_IPR, j));
 		for (i = 0; i < 32; i++) {
 			int k = (j << 5) + i;
-			if (edma_shadow0_read_array(ctlr, SH_IPR, j) &
-							(1 << i)) {
+			if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
+					&& (edma_shadow0_read_array(ctlr,
+							SH_IER, j) & BIT(i))) {
 				/* Clear the corresponding IPR bits */
 				edma_shadow0_write_array(ctlr, SH_ICR, j,
-							(1 << i));
-				if (edma_info[ctlr]->intr_data[k].callback) {
-					edma_info[ctlr]->intr_data[k].callback(
+							BIT(i));
+				if (edma_cc[ctlr]->intr_data[k].callback)
+					edma_cc[ctlr]->intr_data[k].callback(
 						k, DMA_COMPLETE,
-						edma_info[ctlr]->intr_data[k].
+						edma_cc[ctlr]->intr_data[k].
 						data);
-				}
 			}
 		}
 		cnt++;
@@ -421,19 +423,19 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 			for (i = 0; i < 32; i++) {
 				int k = (j << 5) + i;
 				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							(1 << i)) {
+							BIT(i)) {
 					/* Clear the corresponding EMR bits */
 					edma_write_array(ctlr, EDMA_EMCR, j,
-							1 << i);
+							BIT(i));
 					/* Clear any SER */
 					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, (1 << i));
-					if (edma_info[ctlr]->intr_data[k].
+								j, BIT(i));
+					if (edma_cc[ctlr]->intr_data[k].
 								callback) {
-						edma_info[ctlr]->intr_data[k].
+						edma_cc[ctlr]->intr_data[k].
 						callback(k,
 						DMA_CC_ERROR,
-						edma_info[ctlr]->intr_data
+						edma_cc[ctlr]->intr_data
 						[k].data);
 					}
 				}
@@ -442,11 +444,11 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 			dev_dbg(data, "QEMR %02x\n",
 				edma_read(ctlr, EDMA_QEMR));
 			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, 1 << i);
+					edma_write(ctlr, EDMA_QEMCR, BIT(i));
 					edma_shadow0_write(ctlr, SH_QSECR,
-								(1 << i));
+								BIT(i));
 
 					/* NOTE:  not reported!! */
 				}
@@ -458,20 +460,19 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 			 * to just write CCERRCLR with CCERR value...
 			 */
 			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, 1 << i);
+					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
 
 					/* NOTE:  not reported!! */
 				}
 			}
 		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0)
-		    && (edma_read_array(ctlr, EDMA_EMR, 1) == 0)
-		    && (edma_read(ctlr, EDMA_QEMR) == 0)
-		    && (edma_read(ctlr, EDMA_CCERR) == 0)) {
+		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
+		    (edma_read(ctlr, EDMA_CCERR) == 0))
 			break;
-		}
 		cnt++;
 		if (cnt > 10)
 			break;
@@ -509,9 +510,9 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 	int stop_slot = start_slot;
 	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
 
-	for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
+	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
 		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
+		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
 			/* Record our current beginning slot */
 			if (count == num_slots)
 				stop_slot = i;
@@ -527,8 +528,9 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
 				stop_slot = i;
 				break;
-			} else
+			} else {
 				count = num_slots;
+			}
 		}
 	}
 
@@ -538,12 +540,12 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 	 * of contiguous parameter RAM slots but do not find the exact number
 	 * requested as we may reach the total number of parameter RAM slots
 	 */
-	if (i == edma_info[ctlr]->num_slots)
+	if (i == edma_cc[ctlr]->num_slots)
 		stop_slot = i;
 
 	for (j = start_slot; j < stop_slot; j++)
 		if (test_bit(j, tmp_inuse))
-			clear_bit(j, edma_info[ctlr]->edma_inuse);
+			clear_bit(j, edma_cc[ctlr]->edma_inuse);
 
 	if (count)
 		return -EBUSY;
@@ -555,8 +557,27 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
 }
 
+static int prepare_unused_channel_list(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int i, ctlr;
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
+				(int)pdev->resource[i].start >= 0) {
+			ctlr = EDMA_CTLR(pdev->resource[i].start);
+			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
+					edma_cc[ctlr]->edma_unused);
+		}
+	}
+
+	return 0;
+}
+
 /*-----------------------------------------------------------------------*/
 
+static bool unused_chan_list_done;
+
 /* Resource alloc/free:  dma channels, parameter RAM slots */
 
 /**
@@ -594,7 +615,22 @@ int edma_alloc_channel(int channel,
 		void *data,
 		enum dma_event_q eventq_no)
 {
-	unsigned i, done, ctlr = 0;
+	unsigned i, done = 0, ctlr = 0;
+	int ret = 0;
+
+	if (!unused_chan_list_done) {
+		/*
+		 * Scan all the platform devices to find out the EDMA channels
+		 * used and clear them in the unused list, making the rest
+		 * available for ARM usage.
+		 */
+		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
+				prepare_unused_channel_list);
+		if (ret < 0)
+			return ret;
+
+		unused_chan_list_done = true;
+	}
 
 	if (channel >= 0) {
 		ctlr = EDMA_CTLR(channel);
@@ -602,17 +638,16 @@ int edma_alloc_channel(int channel,
 	}
 
 	if (channel < 0) {
-		for (i = 0; i < EDMA_MAX_CC; i++) {
+		for (i = 0; i < arch_num_cc; i++) {
 			channel = 0;
 			for (;;) {
-				channel = find_next_bit(edma_info[i]->
-						edma_noevent,
-						edma_info[i]->num_channels,
+				channel = find_next_bit(edma_cc[i]->edma_unused,
+						edma_cc[i]->num_channels,
 						channel);
-				if (channel == edma_info[i]->num_channels)
-					return -ENOMEM;
+				if (channel == edma_cc[i]->num_channels)
+					break;
 				if (!test_and_set_bit(channel,
-						edma_info[i]->edma_inuse)) {
+						edma_cc[i]->edma_inuse)) {
 					done = 1;
 					ctlr = i;
 					break;
@@ -622,14 +657,16 @@ int edma_alloc_channel(int channel,
 			if (done)
 				break;
 		}
-	} else if (channel >= edma_info[ctlr]->num_channels) {
+		if (!done)
+			return -ENOMEM;
+	} else if (channel >= edma_cc[ctlr]->num_channels) {
 		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
+	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
 	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
 
 	/* ensure no events are pending */
 	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
@@ -642,7 +679,7 @@ int edma_alloc_channel(int channel,
 
 	map_dmach_queue(ctlr, channel, eventq_no);
 
-	return channel;
+	return EDMA_CTLR_CHAN(ctlr, channel);
 }
 EXPORT_SYMBOL(edma_alloc_channel);
 
@@ -665,7 +702,7 @@ void edma_free_channel(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel >= edma_info[ctlr]->num_channels)
+	if (channel >= edma_cc[ctlr]->num_channels)
 		return;
 
 	setup_dma_interrupt(channel, NULL, NULL);
@@ -673,7 +710,7 @@ void edma_free_channel(unsigned channel)
 
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_info[ctlr]->edma_inuse);
+	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_channel);
 
@@ -697,20 +734,19 @@ int edma_alloc_slot(unsigned ctlr, int slot)
 		slot = EDMA_CHAN_SLOT(slot);
 
 	if (slot < 0) {
-		slot = edma_info[ctlr]->num_channels;
+		slot = edma_cc[ctlr]->num_channels;
 		for (;;) {
-			slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse,
-					edma_info[ctlr]->num_slots, slot);
-			if (slot == edma_info[ctlr]->num_slots)
+			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
+					edma_cc[ctlr]->num_slots, slot);
+			if (slot == edma_cc[ctlr]->num_slots)
 				return -ENOMEM;
-			if (!test_and_set_bit(slot,
-						edma_info[ctlr]->edma_inuse))
+			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
 				break;
 		}
-	} else if (slot < edma_info[ctlr]->num_channels ||
-			slot >= edma_info[ctlr]->num_slots) {
+	} else if (slot < edma_cc[ctlr]->num_channels ||
+			slot >= edma_cc[ctlr]->num_slots) {
 		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) {
+	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
@@ -736,13 +772,13 @@ void edma_free_slot(unsigned slot)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots)
+	if (slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots)
 		return;
 
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_info[ctlr]->edma_inuse);
+	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_slot);
 
@@ -780,8 +816,8 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 	 * of slots
 	 */
 	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots))
+		(slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots))
 		return -EINVAL;
 
 	/*
@@ -790,13 +826,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 	 * channels
 	 */
 	if (count < 1 || count >
-		(edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
 		return -EINVAL;
 
 	switch (id) {
 	case EDMA_CONT_PARAMS_ANY:
 		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_info[ctlr]->num_channels);
+						 edma_cc[ctlr]->num_channels);
 	case EDMA_CONT_PARAMS_FIXED_EXACT:
 	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
 		return reserve_contiguous_slots(ctlr, id, count, slot);
@@ -828,8 +864,8 @@ int edma_free_cont_slots(unsigned slot, int count)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots ||
+	if (slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots ||
 		count < 1)
 		return -EINVAL;
 
@@ -839,7 +875,7 @@ int edma_free_cont_slots(unsigned slot, int count)
 
 		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
 			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
+		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
 	}
 
 	return 0;
@@ -869,7 +905,7 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
@@ -907,7 +943,7 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
@@ -967,7 +1003,7 @@ void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0xffff0000, src_bidx);
 		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
@@ -993,7 +1029,7 @@ void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0x0000ffff, dest_bidx << 16);
 		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
@@ -1040,7 +1076,7 @@ void edma_set_transfer_params(unsigned slot,
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
 				0x0000ffff, bcnt_rld << 16);
 		if (sync_mode == ASYNC)
@@ -1070,9 +1106,9 @@ void edma_link(unsigned from, unsigned to)
 	ctlr_to = EDMA_CTLR(to);
 	to = EDMA_CHAN_SLOT(to);
 
-	if (from >= edma_info[ctlr_from]->num_slots)
+	if (from >= edma_cc[ctlr_from]->num_slots)
 		return;
-	if (to >= edma_info[ctlr_to]->num_slots)
+	if (to >= edma_cc[ctlr_to]->num_slots)
 		return;
 	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
 				PARM_OFFSET(to));
@@ -1093,7 +1129,7 @@ void edma_unlink(unsigned from)
 	ctlr = EDMA_CTLR(from);
 	from = EDMA_CHAN_SLOT(from);
 
-	if (from >= edma_info[ctlr]->num_slots)
+	if (from >= edma_cc[ctlr]->num_slots)
 		return;
 	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
 }
@@ -1120,7 +1156,7 @@ void edma_write_slot(unsigned slot, const struct edmacc_param *param)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot >= edma_info[ctlr]->num_slots)
+	if (slot >= edma_cc[ctlr]->num_slots)
 		return;
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
 			PARM_SIZE);
@@ -1142,7 +1178,7 @@ void edma_read_slot(unsigned slot, struct edmacc_param *param)
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot >= edma_info[ctlr]->num_slots)
+	if (slot >= edma_cc[ctlr]->num_slots)
 		return;
 	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			PARM_SIZE);
@@ -1167,8 +1203,8 @@ void edma_pause(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
-		unsigned int mask = (1 << (channel & 0x1f));
+	if (channel < edma_cc[ctlr]->num_channels) {
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
 	}
@@ -1188,8 +1224,8 @@ void edma_resume(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
-		unsigned int mask = (1 << (channel & 0x1f));
+	if (channel < edma_cc[ctlr]->num_channels) {
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
 	}
@@ -1214,12 +1250,12 @@ int edma_start(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = channel >> 5;
-		unsigned int mask = (1 << (channel & 0x1f));
+		unsigned int mask = BIT(channel & 0x1f);
 
 		/* EDMA channels without event association */
-		if (test_bit(channel, edma_info[ctlr]->edma_noevent)) {
+		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
 			pr_debug("EDMA: ESR%d %08x\n", j,
 				edma_shadow0_read_array(ctlr, SH_ESR, j));
 			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
@@ -1229,7 +1265,8 @@ int edma_start(unsigned channel)
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
 			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending error */
+		/* Clear any pending event or error */
+		edma_write_array(ctlr, EDMA_ECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
@@ -1259,9 +1296,9 @@ void edma_stop(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = channel >> 5;
-		unsigned int mask = (1 << (channel & 0x1f));
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
 		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
@@ -1298,9 +1335,9 @@ void edma_clean_channel(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = (channel >> 5);
-		unsigned int mask = 1 << (channel & 0x1f);
+		unsigned int mask = BIT(channel & 0x1f);
 
 		pr_debug("EDMA: EMR%d %08x\n", j,
 				edma_read_array(ctlr, EDMA_EMR, j));
@@ -1309,7 +1346,7 @@ void edma_clean_channel(unsigned channel)
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3);
+		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
 	}
 }
 EXPORT_SYMBOL(edma_clean_channel);
@@ -1326,12 +1363,12 @@ void edma_clear_event(unsigned channel)
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel >= edma_info[ctlr]->num_channels)
+	if (channel >= edma_cc[ctlr]->num_channels)
 		return;
 	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, 1 << channel);
+		edma_write(ctlr, EDMA_ECR, BIT(channel));
 	else
-		edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32));
+		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
 }
 EXPORT_SYMBOL(edma_clear_event);
 
@@ -1344,7 +1381,6 @@ static int __init edma_probe(struct platform_device *pdev)
 	const s8		(*queue_tc_mapping)[2];
 	int			i, j, found = 0;
 	int			status = -1;
-	const s8		*noevent;
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
@@ -1364,8 +1400,9 @@ static int __init edma_probe(struct platform_device *pdev)
 				break;
 			else
 				return -ENODEV;
-		} else
+		} else {
 			found = 1;
+		}
 
 		len[j] = resource_size(r[j]);
 
@@ -1382,40 +1419,37 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail1;
 		}
 
-		edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
-		if (!edma_info[j]) {
+		edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		if (!edma_cc[j]) {
 			status = -ENOMEM;
 			goto fail1;
 		}
-		memset(edma_info[j], 0, sizeof(struct edma));
+		memset(edma_cc[j], 0, sizeof(struct edma));
 
-		edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel,
+		edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel,
 							EDMA_MAX_DMACH);
-		edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot,
+		edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot,
 							EDMA_MAX_PARAMENTRY);
-		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
-							EDMA_MAX_CC);
+		edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC);
 
-		edma_info[j]->default_queue = info[j].default_queue;
-		if (!edma_info[j]->default_queue)
-			edma_info[j]->default_queue = EVENTQ_1;
+		edma_cc[j]->default_queue = info[j].default_queue;
+		if (!edma_cc[j]->default_queue)
+			edma_cc[j]->default_queue = EVENTQ_1;
 
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
 
-		for (i = 0; i < edma_info[j]->num_slots; i++)
+		for (i = 0; i < edma_cc[j]->num_slots; i++)
 			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
 					&dummy_paramset, PARM_SIZE);
 
-		noevent = info[j].noevent;
-		if (noevent) {
-			while (*noevent != -1)
-				set_bit(*noevent++, edma_info[j]->edma_noevent);
-		}
+		/* Mark all channels as unused */
+		memset(edma_cc[j]->edma_unused, 0xff,
+			sizeof(edma_cc[j]->edma_unused));
 
 		sprintf(irq_name, "edma%d", j);
 		irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_info[j]->irq_res_start = irq[j];
+		edma_cc[j]->irq_res_start = irq[j];
 		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
 					&pdev->dev);
 		if (status < 0) {
@@ -1426,7 +1460,7 @@ static int __init edma_probe(struct platform_device *pdev)
 
 		sprintf(irq_name, "edma%d_err", j);
 		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_info[j]->irq_res_end = err_irq[j];
+		edma_cc[j]->irq_res_end = err_irq[j];
 		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
 					"edma_error", &pdev->dev);
 		if (status < 0) {
@@ -1439,7 +1473,7 @@ static int __init edma_probe(struct platform_device *pdev)
 		 * specified. This way, long transfers on the low priority queue
 		 * started by the codec engine will not cause audio defects.
 		 */
-		for (i = 0; i < edma_info[j]->num_channels; i++)
+		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, EVENTQ_1);
 
 		queue_tc_mapping = info[j].queue_tc_mapping;
@@ -1467,6 +1501,7 @@ static int __init edma_probe(struct platform_device *pdev)
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
 		}
+		arch_num_cc++;
 	}
 
 	if (tc_errs_handled) {
@@ -1501,7 +1536,7 @@ fail1:
 			release_mem_region(r[i]->start, len[i]);
 		if (edmacc_regs_base[i])
 			iounmap(edmacc_regs_base[i]);
-		kfree(edma_info[i]);
+		kfree(edma_cc[i]);
 	}
 	return status;
 }
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 744755b..bf0ff58 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,46 +20,92 @@
 
 #include <asm/mach/irq.h>
 
-static DEFINE_SPINLOCK(gpio_lock);
-
-struct davinci_gpio {
-	struct gpio_chip	chip;
-	struct gpio_controller	*__iomem regs;
-	int			irq_base;
+struct davinci_gpio_regs {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
 };
 
-static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+#define chip2controller(chip)	\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+	void __iomem *ptr;
+
+	if (gpio < 32 * 1)
+		ptr = gpio_base + 0x10;
+	else if (gpio < 32 * 2)
+		ptr = gpio_base + 0x38;
+	else if (gpio < 32 * 3)
+		ptr = gpio_base + 0x60;
+	else if (gpio < 32 * 4)
+		ptr = gpio_base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = gpio_base + 0xb0;
+	else
+		ptr = NULL;
+	return ptr;
+}
 
-/* create a non-inlined version */
-static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
 {
-	return __gpio_to_controller(gpio);
+	struct davinci_gpio_regs __iomem *g;
+
+	g = (__force struct davinci_gpio_regs __iomem *)get_irq_chip_data(irq);
+
+	return g;
 }
 
 static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+			unsigned offset, bool out, int value)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+	unsigned long flags;
 	u32 temp;
+	u32 mask = 1 << offset;
 
-	spin_lock(&gpio_lock);
+	spin_lock_irqsave(&d->lock, flags);
 	temp = __raw_readl(&g->dir);
-	temp |= (1 << offset);
+	if (out) {
+		temp &= ~mask;
+		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
+	} else {
+		temp |= mask;
+	}
 	__raw_writel(temp, &g->dir);
-	spin_unlock(&gpio_lock);
+	spin_unlock_irqrestore(&d->lock, flags);
 
 	return 0;
 }
 
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return __davinci_direction(chip, offset, true, value);
+}
+
 /*
  * Read the pin's value (works even if it's set up as output);
  * returns zero/nonzero.
@@ -69,37 +115,20 @@ static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
  */
 static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
 
 	return (1 << offset) & __raw_readl(&g->in_data);
 }
 
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
-	u32 temp;
-	u32 mask = 1 << offset;
-
-	spin_lock(&gpio_lock);
-	temp = __raw_readl(&g->dir);
-	temp &= ~mask;
-	__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	__raw_writel(temp, &g->dir);
-	spin_unlock(&gpio_lock);
-	return 0;
-}
-
 /*
  * Assuming the pin is muxed as a gpio output, set its output value.
  */
 static void
 davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
 
 	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
 }
@@ -109,6 +138,10 @@ static int __init davinci_gpio_setup(void)
 	int i, base;
 	unsigned ngpio;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs *regs;
+
+	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+		return 0;
 
 	/*
 	 * The gpio banks conceptually expose a segmented bitmap,
@@ -124,6 +157,10 @@ static int __init davinci_gpio_setup(void)
 	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
 		ngpio = DAVINCI_N_GPIO;
 
+	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!gpio_base))
+		return -ENOMEM;
+
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
 
@@ -137,11 +174,20 @@ static int __init davinci_gpio_setup(void)
 		if (chips[i].chip.ngpio > 32)
 			chips[i].chip.ngpio = 32;
 
-		chips[i].regs = gpio2controller(base);
+		spin_lock_init(&chips[i].lock);
+
+		regs = gpio2regs(base);
+		chips[i].regs = regs;
+		chips[i].set_data = &regs->set_data;
+		chips[i].clr_data = &regs->clr_data;
+		chips[i].in_data = &regs->in_data;
 
 		gpiochip_add(&chips[i].chip);
 	}
 
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
 	davinci_gpio_irq_setup();
 	return 0;
 }
@@ -161,7 +207,7 @@ pure_initcall(davinci_gpio_setup);
 
 static void gpio_irq_disable(unsigned irq)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
@@ -170,7 +216,7 @@ static void gpio_irq_disable(unsigned irq)
 
 static void gpio_irq_enable(unsigned irq)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
@@ -186,7 +232,7 @@ static void gpio_irq_enable(unsigned irq)
 
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
@@ -215,7 +261,7 @@ static struct irq_chip gpio_irqchip = {
 static void
 gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = 0xffff;
 
 	/* we only care about one bank */
@@ -253,7 +299,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 
 static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct davinci_gpio_controller *d = chip2controller(chip);
 
 	if (d->irq_base >= 0)
 		return d->irq_base + offset;
@@ -276,7 +322,7 @@ static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
@@ -305,7 +351,7 @@ static int __init davinci_gpio_irq_setup(void)
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct gpio_controller	*__iomem g;
+	struct davinci_gpio_regs	__iomem *g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -354,7 +400,7 @@ static int __init davinci_gpio_irq_setup(void)
 		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
 
 		/* default trigger: both edges */
-		g = gpio2controller(0);
+		g = gpio2regs(0);
 		__raw_writel(~0, &g->set_falling);
 		__raw_writel(~0, &g->set_rising);
 
@@ -362,7 +408,7 @@ static int __init davinci_gpio_irq_setup(void)
 		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
 			set_irq_chip(irq, &gpio_irqchip_unbanked);
 			set_irq_data(irq, (void *) __gpio_mask(gpio));
-			set_irq_chip_data(irq, g);
+			set_irq_chip_data(irq, (__force void *) g);
 			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
 		}
 
@@ -379,18 +425,18 @@ static int __init davinci_gpio_irq_setup(void)
 		unsigned		i;
 
 		/* disabled by default, enabled only as needed */
-		g = gpio2controller(gpio);
+		g = gpio2regs(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
 		/* set up all irqs in this bank */
 		set_irq_chained_handler(bank_irq, gpio_irq_handler);
-		set_irq_chip_data(bank_irq, g);
-		set_irq_data(bank_irq, (void *)irq);
+		set_irq_chip_data(bank_irq, (__force void *) g);
+		set_irq_data(bank_irq, (void *) irq);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
-			set_irq_chip_data(irq, g);
+			set_irq_chip_data(irq, (__force void *) g);
 			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
@@ -403,7 +449,7 @@ done:
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, soc_info->gpio_base + 0x08);
+	__raw_writel(binten, gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
diff --git a/arch/arm/mach-davinci/include/mach/cdce949.h b/arch/arm/mach-davinci/include/mach/cdce949.h
new file mode 100644
index 0000000..c73331f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cdce949.h
@@ -0,0 +1,19 @@
+/*
+ * TI CDCE949 off-chip clock synthesizer support
+ *
+ * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_CDCE949_H
+#define _MACH_DAVINCI_CDCE949_H
+
+#include <linux/clk.h>
+
+#include <mach/clock.h>
+
+int cdce_set_rate(struct clk *clk, unsigned long rate);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 6ca2c9a..a57cba2 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -12,6 +12,9 @@
 #ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
 #define __ARCH_ARM_MACH_DAVINCI_COMMON_H
 
+#include <linux/compiler.h>
+#include <linux/types.h>
+
 struct sys_timer;
 
 extern struct sys_timer davinci_timer;
@@ -21,7 +24,7 @@ extern void __iomem *davinci_intc_base;
 extern int davinci_intc_type;
 
 struct davinci_timer_instance {
-	void __iomem	*base;
+	u32		base;
 	u32		bottom_irq;
 	u32		top_irq;
 	unsigned long	cmp_off;
@@ -34,39 +37,54 @@ struct davinci_timer_info {
 	unsigned int			clocksource_id;
 };
 
-/* SoC specific init support */
+struct davinci_gpio_controller;
+
+/*
+ * SoC info passed into common davinci modules.
+ *
+ * Base addresses in this structure should be physical and not virtual.
+ * Modules that take such base addresses, should internally ioremap() them to
+ * use.
+ */
 struct davinci_soc_info {
 	struct map_desc			*io_desc;
 	unsigned long			io_desc_num;
 	u32				cpu_id;
 	u32				jtag_id;
-	void __iomem			*jtag_id_base;
+	u32				jtag_id_reg;
 	struct davinci_id		*ids;
 	unsigned long			ids_num;
-	struct davinci_clk		*cpu_clks;
-	void __iomem			**psc_bases;
+	struct clk_lookup		*cpu_clks;
+	u32				*psc_bases;
 	unsigned long			psc_bases_num;
-	void __iomem			*pinmux_base;
+	u32				pinmux_base;
 	const struct mux_config		*pinmux_pins;
 	unsigned long			pinmux_pins_num;
-	void __iomem			*intc_base;
+	u32				intc_base;
 	int				intc_type;
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
+	u32				*intc_host_map;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*gpio_base;
+	int				gpio_type;
+	u32				gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
 	unsigned			gpio_unbanked;
+	struct davinci_gpio_controller	*gpio_ctlrs;
+	int				gpio_ctlrs_num;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
+	struct platform_device		*reset_device;
+	void				(*reset)(struct platform_device *);
 };
 
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
+extern void davinci_init_ide(void);
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h
index c4d27ee..4e8190e 100644
--- a/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ b/arch/arm/mach-davinci/include/mach/cp_intc.h
@@ -51,7 +51,6 @@
 #define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
 #define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
 
-void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
-			 u8 *irq_prio);
+void __init cp_intc_init(void);
 
 #endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h
index cbfc6a9..74f088b 100644
--- a/arch/arm/mach-davinci/include/mach/cpuidle.h
+++ b/arch/arm/mach-davinci/include/mach/cpuidle.h
@@ -12,6 +12,7 @@
 
 struct davinci_cpuidle_config {
 	u32 ddr2_pdown;
+	void __iomem *ddr2_ctlr_base;
 };
 
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 189b1ff..cea6b89 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -33,6 +33,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
+#define	DAVINCI_CPU_ID_TNETV107X	0x0b8a0000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -46,6 +47,7 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
+IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -83,4 +85,10 @@ IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
 #define cpu_is_davinci_da850() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
+#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x()
+#else
+#define cpu_is_davinci_tnetv107x() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 9070491..1b31a9a 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -3,7 +3,7 @@
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -13,15 +13,19 @@
 
 #include <video/da8xx-fb.h>
 
+#include <linux/platform_device.h>
+#include <linux/davinci_emac.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/mmc.h>
 #include <mach/usb.h>
+#include <mach/pm.h>
 
-extern void __iomem *da8xx_syscfg_base;
+extern void __iomem *da8xx_syscfg0_base;
+extern void __iomem *da8xx_syscfg1_base;
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -34,13 +38,17 @@ extern void __iomem *da8xx_syscfg_base;
 #define DA8XX_CP_INTC_SIZE	SZ_8K
 #define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
 
-#define DA8XX_SYSCFG_BASE	(IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG_VIRT(x)	(da8xx_syscfg_base + (x))
+#define DA8XX_SYSCFG0_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG0_VIRT(x)	(da8xx_syscfg0_base + (x))
 #define DA8XX_JTAG_ID_REG	0x18
 #define DA8XX_CFGCHIP0_REG	0x17c
 #define DA8XX_CFGCHIP2_REG	0x184
 #define DA8XX_CFGCHIP3_REG	0x188
 
+#define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
+#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
+#define DA8XX_DEEPSLEEP_REG	0x8
+
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
 #define DA8XX_TIMER64P0_BASE	0x01c20000
@@ -48,32 +56,13 @@ extern void __iomem *da8xx_syscfg_base;
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
+#define DA8XX_PLL1_BASE		0x01e1a000
 #define DA8XX_MMCSD0_BASE	0x01c40000
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
 #define DA8XX_DDR2_CTL_BASE	0xb0000000
-
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define PINMUX5			0x14
-#define PINMUX6			0x18
-#define PINMUX7			0x1c
-#define PINMUX8			0x20
-#define PINMUX9			0x24
-#define PINMUX10		0x28
-#define PINMUX11		0x2c
-#define PINMUX12		0x30
-#define PINMUX13		0x34
-#define PINMUX14		0x38
-#define PINMUX15		0x3c
-#define PINMUX16		0x40
-#define PINMUX17		0x44
-#define PINMUX18		0x48
-#define PINMUX19		0x4c
+#define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void __init da830_init(void);
 void __init da850_init(void);
@@ -90,12 +79,16 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
 int da850_register_cpufreq(void);
 int da8xx_register_cpuidle(void);
+void __iomem * __init da8xx_get_mem_ctlr(void);
+int da850_register_pm(struct platform_device *pdev);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
 
+extern struct platform_device da8xx_wdt_device;
+
 extern const short da830_emif25_pins[];
 extern const short da830_spi0_pins[];
 extern const short da830_spi1_pins[];
@@ -134,6 +127,4 @@ extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
 extern const short da850_nor_pins[];
 
-int da8xx_pinmux_setup(const short pins[]);
-
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 17ab523..3cd93a8 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #include <linux/serial_reg.h>
 #define UART_SHIFT	2
 
-		.macro addruart, rx
+		.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 85536d8..36dff4a 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -15,6 +15,9 @@
 #include <mach/asp.h>
 #include <media/davinci/vpfe_capture.h>
 
+#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01E10000
+#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
 #define ASP1_TX_EVT_EN	1
 #define ASP1_RX_EVT_EN	2
 
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index f1710a3..ea5df3b 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -14,10 +14,11 @@
 #define __ASM_ARCH_DM665_H
 
 #include <linux/platform_device.h>
+#include <linux/davinci_emac.h>
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/keyscan.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define DM365_EMAC_BASE			(0x01D07000)
 #define DM365_EMAC_CNTRL_OFFSET		(0x0000)
@@ -31,9 +32,21 @@
 
 #define DM365_RTC_BASE			(0x01C69000)
 
+#define DAVINCI_DM365_VC_BASE		(0x01D0C000)
+#define DAVINCI_DMA_VC_TX		2
+#define DAVINCI_DMA_VC_RX		3
+
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01D10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
+
 void __init dm365_init(void);
 void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_vc(struct snd_platform_data *pdata);
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
 void __init dm365_init_rtc(void);
+void dm365_init_spi0(unsigned chipselect_mask,
+			struct spi_board_info *info, unsigned len);
 
+void dm365_set_vpfe_config(struct vpfe_config *cfg);
 #endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 44e8f0f..6fca568 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,8 +22,8 @@
 #ifndef __ASM_ARCH_DM644X_H
 #define __ASM_ARCH_DM644X_H
 
+#include <linux/davinci_emac.h>
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <media/davinci/vpfe_capture.h>
 
@@ -34,6 +34,12 @@
 #define DM644X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01E00000
+#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
 void dm644x_set_vpfe_config(struct vpfe_config *cfg);
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 8cec746..add6f79 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -12,10 +12,11 @@
 #define __ASM_ARCH_DM646X_H
 
 #include <mach/hardware.h>
-#include <mach/emac.h>
 #include <mach/asp.h>
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/davinci_emac.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -24,12 +25,13 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
-#define DM646X_ATA_REG_BASE		(0x01C66000)
+#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
+#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
 void __init dm646x_init(void);
-void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
+void __init dm646x_board_setup_refclk(struct clk *clk);
 
 void dm646x_video_init(void);
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index eb8bfd7..ced3092 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -280,8 +280,6 @@ struct edma_soc_info {
 	unsigned	n_cc;
 	enum dma_event_q	default_queue;
 
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
 	const s8	(*queue_tc_mapping)[2];
 	const s8	(*queue_priority_mapping)[2];
 };
diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h
deleted file mode 100644
index beff4fb..0000000
--- a/arch/arm/mach-davinci/include/mach/emac.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci EMAC platform support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _MACH_DAVINCI_EMAC_H
-#define _MACH_DAVINCI_EMAC_H
-
-#include <linux/if_ether.h>
-#include <linux/memory.h>
-
-struct emac_platform_data {
-	char mac_addr[ETH_ALEN];
-	u32 ctrl_reg_offset;
-	u32 ctrl_mod_reg_offset;
-	u32 ctrl_ram_offset;
-	u32 mdio_reg_offset;
-	u32 ctrl_ram_size;
-	u32 phy_mask;
-	u32 mdio_max_freq;
-	u8 rmii_en;
-	u8 version;
-};
-
-enum {
-	EMAC_VERSION_1,	/* DM644x */
-	EMAC_VERSION_2,	/* DM646x */
-};
-
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index f3b8ef8..504cc18 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -14,6 +14,8 @@
 #define	__DAVINCI_GPIO_H
 
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
@@ -21,6 +23,10 @@
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
+enum davinci_gpio_type {
+	GPIO_TYPE_DAVINCI = 0,
+};
+
 /*
  * basic gpio routines
  *
@@ -45,17 +51,14 @@
 /* Convert GPIO signal to GPIO pin number */
 #define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
 
-struct gpio_controller {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
 };
 
 /* The __gpio_to_controller() and __gpio_mask() functions inline to constants
@@ -67,25 +70,16 @@ struct gpio_controller {
  *
  * These are NOT part of the cross-platform GPIO interface
  */
-static inline struct gpio_controller *__iomem
+static inline struct davinci_gpio_controller *
 __gpio_to_controller(unsigned gpio)
 {
-	void *__iomem ptr;
-	void __iomem *base = davinci_soc_info.gpio_base;
-
-	if (gpio < 32 * 1)
-		ptr = base + 0x10;
-	else if (gpio < 32 * 2)
-		ptr = base + 0x38;
-	else if (gpio < 32 * 3)
-		ptr = base + 0x60;
-	else if (gpio < 32 * 4)
-		ptr = base + 0x88;
-	else if (gpio < 32 * 5)
-		ptr = base + 0xb0;
-	else
-		ptr = NULL;
-	return ptr;
+	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+	int index = gpio / 32;
+
+	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+		return NULL;
+
+	return ctlrs + index;
 }
 
 static inline u32 __gpio_mask(unsigned gpio)
@@ -101,16 +95,16 @@ static inline u32 __gpio_mask(unsigned gpio)
  */
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-	if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) {
-		struct gpio_controller	*__iomem g;
-		u32			mask;
+	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
+		struct davinci_gpio_controller *ctlr;
+		u32				mask;
 
-		g = __gpio_to_controller(gpio);
+		ctlr = __gpio_to_controller(gpio);
 		mask = __gpio_mask(gpio);
 		if (value)
-			__raw_writel(mask, &g->set_data);
+			__raw_writel(mask, ctlr->set_data);
 		else
-			__raw_writel(mask, &g->clr_data);
+			__raw_writel(mask, ctlr->clr_data);
 		return;
 	}
 
@@ -128,18 +122,18 @@ static inline void gpio_set_value(unsigned gpio, int value)
  */
 static inline int gpio_get_value(unsigned gpio)
 {
-	struct gpio_controller	*__iomem g;
+	struct davinci_gpio_controller *ctlr;
 
-	if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO)
+	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
 		return __gpio_get_value(gpio);
 
-	g = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(&g->in_data);
+	ctlr = __gpio_to_controller(gpio);
+	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
 }
 
 static inline int gpio_cansleep(unsigned gpio)
 {
-	if (__builtin_constant_p(gpio) && gpio < DAVINCI_N_GPIO)
+	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
 		return 0;
 	else
 		return __gpio_cansleep(gpio);
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 41c8938..c45ba1f 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -27,7 +27,7 @@
 /*
  * I/O mapping
  */
-#define IO_PHYS				0x01c00000
+#define IO_PHYS				0x01c00000UL
 #define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
 #define IO_SIZE				0x00400000
 #define IO_VIRT				(IO_PHYS + IO_OFFSET)
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index c248e9b..2312d19 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -1,5 +1,5 @@
 /*
- * DaVinci I2C controller platfrom_device info
+ * DaVinci I2C controller platform_device info
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
@@ -16,6 +16,8 @@
 struct davinci_i2c_platform_data {
 	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
 	unsigned int	bus_delay;	/* post-transaction delay (usec) */
+	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
+	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
 };
 
 /* for board setup code */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 354af71..ec76c77 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -401,6 +401,103 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
+
+/* TNETV107X specific interrupts */
+#define IRQ_TNETV107X_TDM1_TXDMA		0
+#define IRQ_TNETV107X_EXT_INT_0			1
+#define IRQ_TNETV107X_EXT_INT_1			2
+#define IRQ_TNETV107X_GPIO_INT12		3
+#define IRQ_TNETV107X_GPIO_INT13		4
+#define IRQ_TNETV107X_TIMER_0_TINT12		5
+#define IRQ_TNETV107X_TIMER_1_TINT12		6
+#define IRQ_TNETV107X_UART0			7
+#define IRQ_TNETV107X_TDM1_RXDMA		8
+#define IRQ_TNETV107X_MCDMA_INT0		9
+#define IRQ_TNETV107X_MCDMA_INT1		10
+#define IRQ_TNETV107X_TPCC			11
+#define IRQ_TNETV107X_TPCC_INT0			12
+#define IRQ_TNETV107X_TPCC_INT1			13
+#define IRQ_TNETV107X_TPCC_INT2			14
+#define IRQ_TNETV107X_TPCC_INT3			15
+#define IRQ_TNETV107X_TPTC0			16
+#define IRQ_TNETV107X_TPTC1			17
+#define IRQ_TNETV107X_TIMER_0_TINT34		18
+#define IRQ_TNETV107X_ETHSS			19
+#define IRQ_TNETV107X_TIMER_1_TINT34		20
+#define IRQ_TNETV107X_DSP2ARM_INT0		21
+#define IRQ_TNETV107X_DSP2ARM_INT1		22
+#define IRQ_TNETV107X_ARM_NPMUIRQ		23
+#define IRQ_TNETV107X_USB1			24
+#define IRQ_TNETV107X_VLYNQ			25
+#define IRQ_TNETV107X_UART0_DMATX		26
+#define IRQ_TNETV107X_UART0_DMARX		27
+#define IRQ_TNETV107X_TDM1_TXMCSP		28
+#define IRQ_TNETV107X_SSP			29
+#define IRQ_TNETV107X_MCDMA_INT2		30
+#define IRQ_TNETV107X_MCDMA_INT3		31
+#define IRQ_TNETV107X_TDM_CODECIF_EOT		32
+#define IRQ_TNETV107X_IMCOP_SQR_ARM		33
+#define IRQ_TNETV107X_USB0			34
+#define IRQ_TNETV107X_USB_CDMA			35
+#define IRQ_TNETV107X_LCD			36
+#define IRQ_TNETV107X_KEYPAD			37
+#define IRQ_TNETV107X_KEYPAD_FREE		38
+#define IRQ_TNETV107X_RNG			39
+#define IRQ_TNETV107X_PKA			40
+#define IRQ_TNETV107X_TDM0_TXDMA		41
+#define IRQ_TNETV107X_TDM0_RXDMA		42
+#define IRQ_TNETV107X_TDM0_TXMCSP		43
+#define IRQ_TNETV107X_TDM0_RXMCSP		44
+#define IRQ_TNETV107X_TDM1_RXMCSP		45
+#define IRQ_TNETV107X_SDIO1			46
+#define IRQ_TNETV107X_SDIO0			47
+#define IRQ_TNETV107X_TSC			48
+#define IRQ_TNETV107X_TS			49
+#define IRQ_TNETV107X_UART1			50
+#define IRQ_TNETV107X_MBX_LITE			51
+#define IRQ_TNETV107X_GPIO_INT00		52
+#define IRQ_TNETV107X_GPIO_INT01		53
+#define IRQ_TNETV107X_GPIO_INT02		54
+#define IRQ_TNETV107X_GPIO_INT03		55
+#define IRQ_TNETV107X_UART2			56
+#define IRQ_TNETV107X_UART2_DMATX		57
+#define IRQ_TNETV107X_UART2_DMARX		58
+#define IRQ_TNETV107X_IMCOP_IMX			59
+#define IRQ_TNETV107X_IMCOP_VLCD		60
+#define IRQ_TNETV107X_AES			61
+#define IRQ_TNETV107X_DES			62
+#define IRQ_TNETV107X_SHAMD5			63
+#define IRQ_TNETV107X_TPCC_ERR			68
+#define IRQ_TNETV107X_TPCC_PROT			69
+#define IRQ_TNETV107X_TPTC0_ERR			70
+#define IRQ_TNETV107X_TPTC1_ERR			71
+#define IRQ_TNETV107X_UART0_ERR			72
+#define IRQ_TNETV107X_UART1_ERR			73
+#define IRQ_TNETV107X_AEMIF_ERR			74
+#define IRQ_TNETV107X_DDR_ERR			75
+#define IRQ_TNETV107X_WDTARM_INT0		76
+#define IRQ_TNETV107X_MCDMA_ERR			77
+#define IRQ_TNETV107X_GPIO_ERR			78
+#define IRQ_TNETV107X_MPU_ADDR			79
+#define IRQ_TNETV107X_MPU_PROT			80
+#define IRQ_TNETV107X_IOPU_ADDR			81
+#define IRQ_TNETV107X_IOPU_PROT			82
+#define IRQ_TNETV107X_KEYPAD_ADDR_ERR		83
+#define IRQ_TNETV107X_WDT0_ADDR_ERR		84
+#define IRQ_TNETV107X_WDT1_ADDR_ERR		85
+#define IRQ_TNETV107X_CLKCTL_ADDR_ERR		86
+#define IRQ_TNETV107X_PLL_UNLOCK		87
+#define IRQ_TNETV107X_WDTDSP_INT0		88
+#define IRQ_TNETV107X_SEC_CTRL_VIOLATION	89
+#define IRQ_TNETV107X_KEY_MNG_VIOLATION		90
+#define IRQ_TNETV107X_PBIST_CPU			91
+#define IRQ_TNETV107X_WDTARM			92
+#define IRQ_TNETV107X_PSC			93
+#define IRQ_TNETV107X_MMC0			94
+#define IRQ_TNETV107X_MMC1			95
+
+#define TNETV107X_N_CP_INTC_IRQ			96
+
 /* da850 currently has the most gpio pins (144) */
 #define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index 80309ae..a91edfb 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -31,6 +31,11 @@
 #define PHYS_OFFSET DAVINCI_DDR_BASE
 #endif
 
+#define DDR2_SDRCR_OFFSET	0xc
+#define DDR2_SRPD_BIT		BIT(23)
+#define DDR2_MCLKSTOPEN_BIT	BIT(30)
+#define DDR2_LPMODEN_BIT	BIT(31)
+
 /*
  * Increase size of DMA-consistent memory region
  */
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index 5a85e24..d4f1e96 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -22,6 +22,9 @@ struct davinci_mmc_config {
 
 	/* Version of the MMC/SD controller */
 	u8	version;
+
+	/* Number of sg segments */
+	u8	nr_sg;
 };
 void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index b60c693..de11aac 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -194,11 +194,14 @@ enum davinci_dm365_index {
 	DM365_I2C_SCL,
 
 	/* AEMIF */
-	DM365_AEMIF_AR,
+	DM365_AEMIF_AR_A14,
+	DM365_AEMIF_AR_BA0,
 	DM365_AEMIF_A3,
 	DM365_AEMIF_A7,
 	DM365_AEMIF_D15_8,
 	DM365_AEMIF_CE0,
+	DM365_AEMIF_CE1,
+	DM365_AEMIF_WE_OE,
 
 	/* ASP0 function */
 	DM365_MCBSP0_BDX,
@@ -287,10 +290,19 @@ enum davinci_dm365_index {
 	DM365_SPI4_SDENA0,
 	DM365_SPI4_SDENA1,
 
+	/* Clock */
+	DM365_CLKOUT0,
+	DM365_CLKOUT1,
+	DM365_CLKOUT2,
+
 	/* GPIO */
 	DM365_GPIO20,
+	DM365_GPIO30,
+	DM365_GPIO31,
+	DM365_GPIO32,
 	DM365_GPIO33,
 	DM365_GPIO40,
+	DM365_GPIO64_57,
 
 	/* Video */
 	DM365_VOUT_FIELD,
@@ -327,6 +339,8 @@ enum davinci_dm365_index {
 	/* EDMA event muxing */
 	DM365_EVT2_ASP_TX,
 	DM365_EVT3_ASP_RX,
+	DM365_EVT2_VC_TX,
+	DM365_EVT3_VC_RX,
 	DM365_EVT26_MMC0_RX,
 };
 
@@ -899,14 +913,291 @@ enum davinci_da850_index {
 	DA850_GPIO2_15,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
+	DA850_RTC_ALARM,
+};
+
+enum davinci_tnetv107x_index {
+	TNETV107X_ASR_A00,
+	TNETV107X_GPIO32,
+	TNETV107X_ASR_A01,
+	TNETV107X_GPIO33,
+	TNETV107X_ASR_A02,
+	TNETV107X_GPIO34,
+	TNETV107X_ASR_A03,
+	TNETV107X_GPIO35,
+	TNETV107X_ASR_A04,
+	TNETV107X_GPIO36,
+	TNETV107X_ASR_A05,
+	TNETV107X_GPIO37,
+	TNETV107X_ASR_A06,
+	TNETV107X_GPIO38,
+	TNETV107X_ASR_A07,
+	TNETV107X_GPIO39,
+	TNETV107X_ASR_A08,
+	TNETV107X_GPIO40,
+	TNETV107X_ASR_A09,
+	TNETV107X_GPIO41,
+	TNETV107X_ASR_A10,
+	TNETV107X_GPIO42,
+	TNETV107X_ASR_A11,
+	TNETV107X_BOOT_STRP_0,
+	TNETV107X_ASR_A12,
+	TNETV107X_BOOT_STRP_1,
+	TNETV107X_ASR_A13,
+	TNETV107X_GPIO43,
+	TNETV107X_ASR_A14,
+	TNETV107X_GPIO44,
+	TNETV107X_ASR_A15,
+	TNETV107X_GPIO45,
+	TNETV107X_ASR_A16,
+	TNETV107X_GPIO46,
+	TNETV107X_ASR_A17,
+	TNETV107X_GPIO47,
+	TNETV107X_ASR_A18,
+	TNETV107X_GPIO48,
+	TNETV107X_SDIO1_DATA3_0,
+	TNETV107X_ASR_A19,
+	TNETV107X_GPIO49,
+	TNETV107X_SDIO1_DATA2_0,
+	TNETV107X_ASR_A20,
+	TNETV107X_GPIO50,
+	TNETV107X_SDIO1_DATA1_0,
+	TNETV107X_ASR_A21,
+	TNETV107X_GPIO51,
+	TNETV107X_SDIO1_DATA0_0,
+	TNETV107X_ASR_A22,
+	TNETV107X_GPIO52,
+	TNETV107X_SDIO1_CMD_0,
+	TNETV107X_ASR_A23,
+	TNETV107X_GPIO53,
+	TNETV107X_SDIO1_CLK_0,
+	TNETV107X_ASR_BA_1,
+	TNETV107X_GPIO54,
+	TNETV107X_SYS_PLL_CLK,
+	TNETV107X_ASR_CS0,
+	TNETV107X_ASR_CS1,
+	TNETV107X_ASR_CS2,
+	TNETV107X_TDM_PLL_CLK,
+	TNETV107X_ASR_CS3,
+	TNETV107X_ETH_PHY_CLK,
+	TNETV107X_ASR_D00,
+	TNETV107X_GPIO55,
+	TNETV107X_ASR_D01,
+	TNETV107X_GPIO56,
+	TNETV107X_ASR_D02,
+	TNETV107X_GPIO57,
+	TNETV107X_ASR_D03,
+	TNETV107X_GPIO58,
+	TNETV107X_ASR_D04,
+	TNETV107X_GPIO59_0,
+	TNETV107X_ASR_D05,
+	TNETV107X_GPIO60_0,
+	TNETV107X_ASR_D06,
+	TNETV107X_GPIO61_0,
+	TNETV107X_ASR_D07,
+	TNETV107X_GPIO62_0,
+	TNETV107X_ASR_D08,
+	TNETV107X_GPIO63_0,
+	TNETV107X_ASR_D09,
+	TNETV107X_GPIO64_0,
+	TNETV107X_ASR_D10,
+	TNETV107X_SDIO1_DATA3_1,
+	TNETV107X_ASR_D11,
+	TNETV107X_SDIO1_DATA2_1,
+	TNETV107X_ASR_D12,
+	TNETV107X_SDIO1_DATA1_1,
+	TNETV107X_ASR_D13,
+	TNETV107X_SDIO1_DATA0_1,
+	TNETV107X_ASR_D14,
+	TNETV107X_SDIO1_CMD_1,
+	TNETV107X_ASR_D15,
+	TNETV107X_SDIO1_CLK_1,
+	TNETV107X_ASR_OE,
+	TNETV107X_BOOT_STRP_2,
+	TNETV107X_ASR_RNW,
+	TNETV107X_GPIO29_0,
+	TNETV107X_ASR_WAIT,
+	TNETV107X_GPIO30_0,
+	TNETV107X_ASR_WE,
+	TNETV107X_BOOT_STRP_3,
+	TNETV107X_ASR_WE_DQM0,
+	TNETV107X_GPIO31,
+	TNETV107X_LCD_PD17_0,
+	TNETV107X_ASR_WE_DQM1,
+	TNETV107X_ASR_BA0_0,
+	TNETV107X_VLYNQ_CLK,
+	TNETV107X_GPIO14,
+	TNETV107X_LCD_PD19_0,
+	TNETV107X_VLYNQ_RXD0,
+	TNETV107X_GPIO15,
+	TNETV107X_LCD_PD20_0,
+	TNETV107X_VLYNQ_RXD1,
+	TNETV107X_GPIO16,
+	TNETV107X_LCD_PD21_0,
+	TNETV107X_VLYNQ_TXD0,
+	TNETV107X_GPIO17,
+	TNETV107X_LCD_PD22_0,
+	TNETV107X_VLYNQ_TXD1,
+	TNETV107X_GPIO18,
+	TNETV107X_LCD_PD23_0,
+	TNETV107X_SDIO0_CLK,
+	TNETV107X_GPIO19,
+	TNETV107X_SDIO0_CMD,
+	TNETV107X_GPIO20,
+	TNETV107X_SDIO0_DATA0,
+	TNETV107X_GPIO21,
+	TNETV107X_SDIO0_DATA1,
+	TNETV107X_GPIO22,
+	TNETV107X_SDIO0_DATA2,
+	TNETV107X_GPIO23,
+	TNETV107X_SDIO0_DATA3,
+	TNETV107X_GPIO24,
+	TNETV107X_EMU0,
+	TNETV107X_EMU1,
+	TNETV107X_RTCK,
+	TNETV107X_TRST_N,
+	TNETV107X_TCK,
+	TNETV107X_TDI,
+	TNETV107X_TDO,
+	TNETV107X_TMS,
+	TNETV107X_TDM1_CLK,
+	TNETV107X_TDM1_RX,
+	TNETV107X_TDM1_TX,
+	TNETV107X_TDM1_FS,
+	TNETV107X_KEYPAD_R0,
+	TNETV107X_KEYPAD_R1,
+	TNETV107X_KEYPAD_R2,
+	TNETV107X_KEYPAD_R3,
+	TNETV107X_KEYPAD_R4,
+	TNETV107X_KEYPAD_R5,
+	TNETV107X_KEYPAD_R6,
+	TNETV107X_GPIO12,
+	TNETV107X_KEYPAD_R7,
+	TNETV107X_GPIO10,
+	TNETV107X_KEYPAD_C0,
+	TNETV107X_KEYPAD_C1,
+	TNETV107X_KEYPAD_C2,
+	TNETV107X_KEYPAD_C3,
+	TNETV107X_KEYPAD_C4,
+	TNETV107X_KEYPAD_C5,
+	TNETV107X_KEYPAD_C6,
+	TNETV107X_GPIO13,
+	TNETV107X_TEST_CLK_IN,
+	TNETV107X_KEYPAD_C7,
+	TNETV107X_GPIO11,
+	TNETV107X_SSP0_0,
+	TNETV107X_SCC_DCLK,
+	TNETV107X_LCD_PD20_1,
+	TNETV107X_SSP0_1,
+	TNETV107X_SCC_CS_N,
+	TNETV107X_LCD_PD21_1,
+	TNETV107X_SSP0_2,
+	TNETV107X_SCC_D,
+	TNETV107X_LCD_PD22_1,
+	TNETV107X_SSP0_3,
+	TNETV107X_SCC_RESETN,
+	TNETV107X_LCD_PD23_1,
+	TNETV107X_SSP1_0,
+	TNETV107X_GPIO25,
+	TNETV107X_UART2_CTS,
+	TNETV107X_SSP1_1,
+	TNETV107X_GPIO26,
+	TNETV107X_UART2_RD,
+	TNETV107X_SSP1_2,
+	TNETV107X_GPIO27,
+	TNETV107X_UART2_RTS,
+	TNETV107X_SSP1_3,
+	TNETV107X_GPIO28,
+	TNETV107X_UART2_TD,
+	TNETV107X_UART0_CTS,
+	TNETV107X_UART0_RD,
+	TNETV107X_UART0_RTS,
+	TNETV107X_UART0_TD,
+	TNETV107X_UART1_RD,
+	TNETV107X_UART1_TD,
+	TNETV107X_LCD_AC_NCS,
+	TNETV107X_LCD_HSYNC_RNW,
+	TNETV107X_LCD_VSYNC_A0,
+	TNETV107X_LCD_MCLK,
+	TNETV107X_LCD_PD16_0,
+	TNETV107X_LCD_PCLK_E,
+	TNETV107X_LCD_PD00,
+	TNETV107X_LCD_PD01,
+	TNETV107X_LCD_PD02,
+	TNETV107X_LCD_PD03,
+	TNETV107X_LCD_PD04,
+	TNETV107X_LCD_PD05,
+	TNETV107X_LCD_PD06,
+	TNETV107X_LCD_PD07,
+	TNETV107X_LCD_PD08,
+	TNETV107X_GPIO59_1,
+	TNETV107X_LCD_PD09,
+	TNETV107X_GPIO60_1,
+	TNETV107X_LCD_PD10,
+	TNETV107X_ASR_BA0_1,
+	TNETV107X_GPIO61_1,
+	TNETV107X_LCD_PD11,
+	TNETV107X_GPIO62_1,
+	TNETV107X_LCD_PD12,
+	TNETV107X_GPIO63_1,
+	TNETV107X_LCD_PD13,
+	TNETV107X_GPIO64_1,
+	TNETV107X_LCD_PD14,
+	TNETV107X_GPIO29_1,
+	TNETV107X_LCD_PD15,
+	TNETV107X_GPIO30_1,
+	TNETV107X_EINT0,
+	TNETV107X_GPIO08,
+	TNETV107X_EINT1,
+	TNETV107X_GPIO09,
+	TNETV107X_GPIO00,
+	TNETV107X_LCD_PD20_2,
+	TNETV107X_TDM_CLK_IN_2,
+	TNETV107X_GPIO01,
+	TNETV107X_LCD_PD21_2,
+	TNETV107X_24M_CLK_OUT_1,
+	TNETV107X_GPIO02,
+	TNETV107X_LCD_PD22_2,
+	TNETV107X_GPIO03,
+	TNETV107X_LCD_PD23_2,
+	TNETV107X_GPIO04,
+	TNETV107X_LCD_PD16_1,
+	TNETV107X_USB0_RXERR,
+	TNETV107X_GPIO05,
+	TNETV107X_LCD_PD17_1,
+	TNETV107X_TDM_CLK_IN_1,
+	TNETV107X_GPIO06,
+	TNETV107X_LCD_PD18,
+	TNETV107X_24M_CLK_OUT_2,
+	TNETV107X_GPIO07,
+	TNETV107X_LCD_PD19_1,
+	TNETV107X_USB1_RXERR,
+	TNETV107X_ETH_PLL_CLK,
+	TNETV107X_MDIO,
+	TNETV107X_MDC,
+	TNETV107X_AIC_MUTE_STAT_N,
+	TNETV107X_TDM0_CLK,
+	TNETV107X_AIC_HNS_EN_N,
+	TNETV107X_TDM0_FS,
+	TNETV107X_AIC_HDS_EN_STAT_N,
+	TNETV107X_TDM0_TX,
+	TNETV107X_AIC_HNF_EN_STAT_N,
+	TNETV107X_TDM0_RX,
 };
 
+#define PINMUX(x)		(4 * (x))
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
+extern int davinci_cfg_reg_list(const short pins[]);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+static inline int davinci_cfg_reg_list(const short pins[])
+{
+	return 0;
+}
 #endif
 
 #endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h
new file mode 100644
index 0000000..37b19bf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * TI DaVinci platform support for power management.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MACH_DAVINCI_PM_H
+#define _MACH_DAVINCI_PM_H
+
+/*
+ * Caution: Assembly code in sleep.S makes assumtion on the order
+ * of the members of this structure.
+ */
+struct davinci_pm_config {
+	void __iomem *ddr2_ctlr_base;
+	void __iomem *ddrpsc_reg_base;
+	int ddrpsc_num;
+	void __iomem *ddrpll_reg_base;
+	void __iomem *deepsleep_reg;
+	void __iomem *cpupll_reg_base;
+	/*
+	 * Note on SLEEPCOUNT:
+	 * The SLEEPCOUNT feature is mainly intended for cases in which
+	 * the internal oscillator is used. The internal oscillator is
+	 * fully disabled in deep sleep mode.  When you exist deep sleep
+	 * mode, the oscillator will be turned on and will generate very
+	 * small oscillations which will not be detected by the deep sleep
+	 * counter.  Eventually those oscillations will grow to an amplitude
+	 * large enough to start incrementing the deep sleep counter.
+	 * In this case recommendation from hardware engineers is that the
+	 * SLEEPCOUNT be set to 4096.  This means that 4096 valid clock cycles
+	 * must be detected before the clock is passed to the rest of the
+	 * system.
+	 * In the case that the internal oscillator is not used and the
+	 * clock is generated externally, the SLEEPCOUNT value can be very
+	 * small since the clock input is assumed to be stable before SoC
+	 * is taken out of deepsleep mode.  A value of 128 would be more than
+	 * adequate.
+	 */
+	int sleepcount;
+};
+
+extern unsigned int davinci_cpu_suspend_sz;
+extern void davinci_cpu_suspend(struct davinci_pm_config *);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 171173c..983da6e 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -180,8 +180,76 @@
 #define DA8XX_LPSC1_CR_P3_SS		26
 #define DA8XX_LPSC1_L3_CBA_RAM		31
 
+/* TNETV107X LPSC Assignments */
+#define TNETV107X_LPSC_ARM			0
+#define TNETV107X_LPSC_GEM			1
+#define TNETV107X_LPSC_DDR2_PHY			2
+#define TNETV107X_LPSC_TPCC			3
+#define TNETV107X_LPSC_TPTC0			4
+#define TNETV107X_LPSC_TPTC1			5
+#define TNETV107X_LPSC_RAM			6
+#define TNETV107X_LPSC_MBX_LITE			7
+#define TNETV107X_LPSC_LCD			8
+#define TNETV107X_LPSC_ETHSS			9
+#define TNETV107X_LPSC_AEMIF			10
+#define TNETV107X_LPSC_CHIP_CFG			11
+#define TNETV107X_LPSC_TSC			12
+#define TNETV107X_LPSC_ROM			13
+#define TNETV107X_LPSC_UART2			14
+#define TNETV107X_LPSC_PKTSEC			15
+#define TNETV107X_LPSC_SECCTL			16
+#define TNETV107X_LPSC_KEYMGR			17
+#define TNETV107X_LPSC_KEYPAD			18
+#define TNETV107X_LPSC_GPIO			19
+#define TNETV107X_LPSC_MDIO			20
+#define TNETV107X_LPSC_SDIO0			21
+#define TNETV107X_LPSC_UART0			22
+#define TNETV107X_LPSC_UART1			23
+#define TNETV107X_LPSC_TIMER0			24
+#define TNETV107X_LPSC_TIMER1			25
+#define TNETV107X_LPSC_WDT_ARM			26
+#define TNETV107X_LPSC_WDT_DSP			27
+#define TNETV107X_LPSC_SSP			28
+#define TNETV107X_LPSC_TDM0			29
+#define TNETV107X_LPSC_VLYNQ			30
+#define TNETV107X_LPSC_MCDMA			31
+#define TNETV107X_LPSC_USB0			32
+#define TNETV107X_LPSC_TDM1			33
+#define TNETV107X_LPSC_DEBUGSS			34
+#define TNETV107X_LPSC_ETHSS_RGMII		35
+#define TNETV107X_LPSC_SYSTEM			36
+#define TNETV107X_LPSC_IMCOP			37
+#define TNETV107X_LPSC_SPARE			38
+#define TNETV107X_LPSC_SDIO1			39
+#define TNETV107X_LPSC_USB1			40
+#define TNETV107X_LPSC_USBSS			41
+#define TNETV107X_LPSC_DDR2_EMIF1_VRST		42
+#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST	43
+#define TNETV107X_LPSC_MAX			44
+
+/* PSC register offsets */
+#define EPCPR		0x070
+#define PTCMD		0x120
+#define PTSTAT		0x128
+#define PDSTAT		0x200
+#define PDCTL1		0x304
+#define MDSTAT		0x800
+#define MDCTL		0xA00
+
+/* PSC module states */
+#define PSC_STATE_SWRSTDISABLE	0
+#define PSC_STATE_SYNCRST	1
+#define PSC_STATE_DISABLE	2
+#define PSC_STATE_ENABLE	3
+
+#define MDSTAT_STATE_MASK 0x1f
+
+#ifndef __ASSEMBLER__
+
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, char enable);
+		unsigned int id, u32 next_state);
+
+#endif
 
 #endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index a584697..f6c4f34 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -13,7 +13,6 @@
 
 #include <mach/hardware.h>
 
-#define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
new file mode 100644
index 0000000..910efbf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_SPI_H
+#define __ARCH_ARM_DAVINCI_SPI_H
+
+enum {
+	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
+	SPI_VERSION_2, /* For DA8xx */
+};
+
+struct davinci_spi_platform_data {
+	u8	version;
+	u8	num_chipselect;
+	u8	wdelay;
+	u8	odd_parity;
+	u8	parity_enable;
+	u8	wait_enable;
+	u8	timer_disable;
+	u8	clk_internal;
+	u8	cs_hold;
+	u8	intr_level;
+	u8	poll_mode;
+	u8	use_dma;
+	u8	c2tdelay;
+	u8	t2cdelay;
+};
+
+#endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 5a7d758..e65629c 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-extern void davinci_watchdog_reset(void);
+#include <mach/common.h>
 
 static inline void arch_idle(void)
 {
@@ -20,7 +20,8 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	davinci_watchdog_reset();
+	if (davinci_soc_info.reset)
+		davinci_soc_info.reset(davinci_soc_info.reset_device);
 }
 
 #endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
index 5282756..9b88529 100644
--- a/arch/arm/mach-davinci/include/mach/timex.h
+++ b/arch/arm/mach-davinci/include/mach/timex.h
@@ -11,7 +11,12 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* The source frequency for the timers is the 27MHz clock */
+/*
+ * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
+ * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
+ * linux/jiffies.h) are not used directly in code. Currently none of the
+ * code relevant to DaVinci platform depends on these values directly.
+ */
 #define CLOCK_TICK_RATE 27000000
 
 #endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 49912b4..8ea60a8b 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -12,19 +12,29 @@
 #include <linux/io.h>
 
 #include <asm/tlb.h>
+#include <asm/mach/map.h>
 
-#define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
+#include <mach/common.h>
 
 /*
  * Intercept ioremap() requests for addresses in our fixed mapping regions.
  */
 void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
 {
-	if (BETWEEN(p, IO_PHYS, IO_SIZE))
-		return XLATE(p, IO_PHYS, IO_VIRT);
+	struct map_desc *desc = davinci_soc_info.io_desc;
+	int desc_num = davinci_soc_info.io_desc_num;
+	int i;
 
-	return __arm_ioremap(p, size, type);
+	for (i = 0; i < desc_num; i++, desc++) {
+		unsigned long iophys = __pfn_to_phys(desc->pfn);
+		unsigned long iosize = desc->length;
+
+		if (p >= iophys && (p + size) <= (iophys + iosize))
+			return __io(desc->virtual + p - iophys);
+	}
+
+	return __arm_ioremap_caller(p, size, type,
+					__builtin_return_address(0));
 }
 EXPORT_SYMBOL(davinci_ioremap);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index af92ffe..784ddf3 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -116,6 +116,11 @@ void __init davinci_irq_init(void)
 	unsigned i;
 	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
+	davinci_intc_type = DAVINCI_INTC_TYPE_AINTC;
+	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_4K);
+	if (WARN_ON(!davinci_intc_base))
+		return;
+
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
 	davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
@@ -148,7 +153,7 @@ void __init davinci_irq_init(void)
 	}
 
 	/* set up genirq dispatch for ARM INTC */
-	for (i = 0; i < DAVINCI_N_AINTC_IRQ; i++) {
+	for (i = 0; i < davinci_soc_info.intc_irq_num; i++) {
 		set_irq_chip(i, &davinci_irq_chip_0);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		if (i != IRQ_TINT1_TINT34)
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index f757e83..f34a8dc 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -22,6 +22,8 @@
 #include <mach/mux.h>
 #include <mach/common.h>
 
+static void __iomem *pinmux_base;
+
 /*
  * Sets the DAVINCI MUX register based on the table
  */
@@ -29,14 +31,19 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!soc_info->pinmux_pins)
-		BUG();
+	if (WARN_ON(!soc_info->pinmux_pins))
+		return -ENODEV;
+
+	if (!pinmux_base) {
+		pinmux_base = ioremap(soc_info->pinmux_base, SZ_4K);
+		if (WARN_ON(!pinmux_base))
+			return -ENOMEM;
+	}
 
 	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
@@ -57,7 +64,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 		unsigned	tmp1, tmp2;
 
 		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = __raw_readl(base + cfg->mux_reg);
+		reg_orig = __raw_readl(pinmux_base + cfg->mux_reg);
 
 		mask = (cfg->mask << cfg->mask_offset);
 		tmp1 = reg_orig & mask;
@@ -69,7 +76,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 		if (tmp1 != tmp2)
 			warn = 1;
 
-		__raw_writel(reg, base + cfg->mux_reg);
+		__raw_writel(reg, pinmux_base + cfg->mux_reg);
 		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
@@ -91,7 +98,7 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
 
-int da8xx_pinmux_setup(const short pins[])
+int __init_or_module davinci_cfg_reg_list(const short pins[])
 {
 	int i, error = -EINVAL;
 
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index adc8694..5aad1e7 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -20,7 +20,7 @@
 			.name =  #desc,					\
 			.debug = dbg,					\
 			.mux_reg_name = "PINMUX"#muxreg,		\
-			.mux_reg = PINMUX##muxreg,			\
+			.mux_reg = PINMUX(muxreg),			\
 			.mask_offset = mode_offset,			\
 			.mask = mode_mask,				\
 			.mode = mux_mode,				\
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
new file mode 100644
index 0000000..fab953b
--- /dev/null
+++ b/arch/arm/mach-davinci/pm.c
@@ -0,0 +1,158 @@
+/*
+ * DaVinci Power Management Routines
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include <asm/cacheflush.h>
+#include <asm/delay.h>
+
+#include <mach/da8xx.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
+
+#include "clock.h"
+
+#define DEEPSLEEP_SLEEPCOUNT_MASK	0xFFFF
+
+static void (*davinci_sram_suspend) (struct davinci_pm_config *);
+static struct davinci_pm_config *pdata;
+
+static void davinci_sram_push(void *dest, void *src, unsigned int size)
+{
+	memcpy(dest, src, size);
+	flush_icache_range((unsigned long)dest, (unsigned long)(dest + size));
+}
+
+static void davinci_pm_suspend(void)
+{
+	unsigned val;
+
+	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+
+		/* Switch CPU PLL to bypass mode */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+		udelay(PLL_BYPASS_TIME);
+
+		/* Powerdown CPU PLL */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val |= PLLCTL_PLLPWRDN;
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+	}
+
+	/* Configure sleep count in deep sleep register */
+	val = __raw_readl(pdata->deepsleep_reg);
+	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
+	val |= pdata->sleepcount;
+	__raw_writel(val, pdata->deepsleep_reg);
+
+	/* System goes to sleep in this call */
+	davinci_sram_suspend(pdata);
+
+	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
+
+		/* put CPU PLL in reset */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val &= ~PLLCTL_PLLRST;
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+		/* put CPU PLL in power down */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val &= ~PLLCTL_PLLPWRDN;
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+		/* wait for CPU PLL reset */
+		udelay(PLL_RESET_TIME);
+
+		/* bring CPU PLL out of reset */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val |= PLLCTL_PLLRST;
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+
+		/* Wait for CPU PLL to lock */
+		udelay(PLL_LOCK_TIME);
+
+		/* Remove CPU PLL from bypass mode */
+		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
+		val &= ~PLLCTL_PLLENSRC;
+		val |= PLLCTL_PLLEN;
+		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
+	}
+}
+
+static int davinci_pm_enter(suspend_state_t state)
+{
+	int ret = 0;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		davinci_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static struct platform_suspend_ops davinci_pm_ops = {
+	.enter		= davinci_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init davinci_pm_probe(struct platform_device *pdev)
+{
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "cannot get platform data\n");
+		return -ENOENT;
+	}
+
+	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
+	if (!davinci_sram_suspend) {
+		dev_err(&pdev->dev, "cannot allocate SRAM memory\n");
+		return -ENOMEM;
+	}
+
+	davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
+						davinci_cpu_suspend_sz);
+
+	suspend_set_ops(&davinci_pm_ops);
+
+	return 0;
+}
+
+static int __exit davinci_pm_remove(struct platform_device *pdev)
+{
+	sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz);
+	return 0;
+}
+
+static struct platform_driver davinci_pm_driver = {
+	.driver = {
+		.name	 = "pm-davinci",
+		.owner	 = THIS_MODULE,
+	},
+	.remove = __exit_p(davinci_pm_remove),
+};
+
+static int __init davinci_pm_init(void)
+{
+	return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
+}
+late_initcall(davinci_pm_init);
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 04a3cb7..1b15dbd 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -25,17 +25,6 @@
 #include <mach/cputype.h>
 #include <mach/psc.h>
 
-/* PSC register offsets */
-#define EPCPR		0x070
-#define PTCMD		0x120
-#define PTSTAT		0x128
-#define PDSTAT		0x200
-#define PDCTL1		0x304
-#define MDSTAT		0x800
-#define MDCTL		0xA00
-
-#define MDSTAT_STATE_MASK 0x1f
-
 /* Return nonzero iff the domain's clock is active */
 int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 {
@@ -49,8 +38,9 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 		return 0;
 	}
 
-	psc_base = soc_info->psc_bases[ctlr];
+	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	iounmap(psc_base);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
@@ -58,12 +48,11 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, char enable)
+		unsigned int id, u32 next_state)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
 	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
 		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
@@ -71,7 +60,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		return;
 	}
 
-	psc_base = soc_info->psc_bases[ctlr];
+	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
@@ -111,4 +100,6 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 	do {
 		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
+
+	iounmap(psc_base);
 }
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 7ce5ba0..1875740 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -35,14 +35,20 @@ static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
 	offset <<= up->regshift;
-	return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
+
+	WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset);
+
+	return (unsigned int)__raw_readl(up->membase + offset);
 }
 
 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
 {
 	offset <<= p->regshift;
-	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
+
+	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
+
+	__raw_writel(value, p->membase + offset);
 }
 
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
@@ -77,20 +83,32 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+	for (i = 0; p->flags; i++, p++) {
 		if (!(info->enabled_uarts & (1 << i)))
 			continue;
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
-		if (IS_ERR(uart_clk))
+		if (IS_ERR(uart_clk)) {
 			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
 					__func__, __LINE__, i);
-		else {
-			clk_enable(uart_clk);
-			p->uartclk = clk_get_rate(uart_clk);
-			davinci_serial_reset(p);
+			continue;
 		}
+
+		clk_enable(uart_clk);
+		p->uartclk = clk_get_rate(uart_clk);
+
+		if (!p->membase && p->mapbase) {
+			p->membase = ioremap(p->mapbase, SZ_4K);
+
+			if (p->membase)
+				p->flags &= ~UPF_IOREMAP;
+			else
+				pr_err("uart regs ioremap failed\n");
+		}
+
+		if (p->membase && p->type != PORT_AR7)
+			davinci_serial_reset(p);
 	}
 
 	return platform_device_register(soc_info->serial_dev);
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
new file mode 100644
index 0000000..fb5e72b
--- /dev/null
+++ b/arch/arm/mach-davinci/sleep.S
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* replicated define because linux/bitops.h cannot be included in assembly */
+#define BIT(nr)			(1 << (nr))
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/psc.h>
+#include <mach/memory.h>
+
+#include "clock.h"
+
+/* Arbitrary, hardware currently does not update PHYRDY correctly */
+#define PHYRDY_CYCLES		0x1000
+
+/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */
+#define PLL_BYPASS_CYCLES	(PLL_BYPASS_TIME * 25)
+#define PLL_RESET_CYCLES	(PLL_RESET_TIME	* 25)
+#define PLL_LOCK_CYCLES		(PLL_LOCK_TIME * 25)
+
+#define DEEPSLEEP_SLEEPENABLE_BIT	BIT(31)
+
+	.text
+/*
+ * Move DaVinci into deep sleep state
+ *
+ * Note: This code is copied to internal SRAM by PM code. When the DaVinci
+ *	 wakes up it continues execution at the point it went to sleep.
+ * Register Usage:
+ * 	r0: contains virtual base for DDR2 controller
+ * 	r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
+ * 	r2: contains PSC number for DDR2
+ * 	r3: contains virtual base DDR2 PLL controller
+ * 	r4: contains virtual address of the DEEPSLEEP register
+ */
+ENTRY(davinci_cpu_suspend)
+	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
+
+	ldr 	ip, CACHE_FLUSH
+	blx	ip
+
+	ldmia	r0, {r0-r4}
+
+	/*
+	 * Switch DDR to self-refresh mode.
+	 */
+
+	/* calculate SDRCR address */
+	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
+	bic	ip, ip, #DDR2_SRPD_BIT
+	orr	ip, ip, #DDR2_LPMODEN_BIT
+	str	ip, [r0, #DDR2_SDRCR_OFFSET]
+
+	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
+	orr	ip, ip, #DDR2_MCLKSTOPEN_BIT
+	str	ip, [r0, #DDR2_SDRCR_OFFSET]
+
+       mov	ip, #PHYRDY_CYCLES
+1:     subs	ip, ip, #0x1
+       bne	1b
+
+       /* Disable DDR2 LPSC */
+	mov	r7, r0
+	mov	r0, #0x2
+	bl davinci_ddr_psc_config
+	mov	r0, r7
+
+	/* Disable clock to DDR PHY */
+	ldr	ip, [r3, #PLLDIV1]
+	bic	ip, ip, #PLLDIV_EN
+	str	ip, [r3, #PLLDIV1]
+
+	/* Put the DDR PLL in bypass and power down */
+	ldr	ip, [r3, #PLLCTL]
+	bic	ip, ip, #PLLCTL_PLLENSRC
+	bic	ip, ip, #PLLCTL_PLLEN
+	str	ip, [r3, #PLLCTL]
+
+	/* Wait for PLL to switch to bypass */
+       mov	ip, #PLL_BYPASS_CYCLES
+2:     subs	ip, ip, #0x1
+       bne	2b
+
+       /* Power down the PLL */
+	ldr	ip, [r3, #PLLCTL]
+	orr	ip, ip, #PLLCTL_PLLPWRDN
+	str	ip, [r3, #PLLCTL]
+
+	/* Go to deep sleep */
+	ldr	ip, [r4]
+	orr	ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
+	/* System goes to sleep beyond after this instruction */
+	str	ip, [r4]
+
+	/* Wake up from sleep */
+
+	/* Clear sleep enable */
+	ldr	ip, [r4]
+	bic	ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
+	str	ip, [r4]
+
+	/* initialize the DDR PLL controller */
+
+	/* Put PLL in reset */
+	ldr	ip, [r3, #PLLCTL]
+	bic	ip, ip, #PLLCTL_PLLRST
+	str	ip, [r3, #PLLCTL]
+
+	/* Clear PLL power down */
+	ldr	ip, [r3, #PLLCTL]
+	bic	ip, ip, #PLLCTL_PLLPWRDN
+	str	ip, [r3, #PLLCTL]
+
+       mov	ip, #PLL_RESET_CYCLES
+3:     subs	ip, ip, #0x1
+       bne	3b
+
+       /* Bring PLL out of reset */
+	ldr	ip, [r3, #PLLCTL]
+	orr	ip, ip, #PLLCTL_PLLRST
+	str	ip, [r3, #PLLCTL]
+
+	/* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */
+       mov	ip, #PLL_LOCK_CYCLES
+4:     subs	ip, ip, #0x1
+       bne	4b
+
+       /* Remove PLL from bypass mode */
+	ldr	ip, [r3, #PLLCTL]
+	bic	ip, ip, #PLLCTL_PLLENSRC
+	orr	ip, ip, #PLLCTL_PLLEN
+	str	ip, [r3, #PLLCTL]
+
+	/* Start 2x clock to DDR2 */
+
+	ldr	ip, [r3, #PLLDIV1]
+	orr	ip, ip, #PLLDIV_EN
+	str	ip, [r3, #PLLDIV1]
+
+	/* Enable VCLK */
+
+       /* Enable DDR2 LPSC */
+	mov	r7, r0
+	mov	r0, #0x3
+	bl davinci_ddr_psc_config
+	mov	r0, r7
+
+	/* clear  MCLKSTOPEN */
+
+	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
+	bic	ip, ip, #DDR2_MCLKSTOPEN_BIT
+	str	ip, [r0, #DDR2_SDRCR_OFFSET]
+
+	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
+	bic	ip, ip, #DDR2_LPMODEN_BIT
+	str	ip, [r0, #DDR2_SDRCR_OFFSET]
+
+	/* Restore registers and return */
+	ldmfd   sp!, {r0-r12, pc}
+
+ENDPROC(davinci_cpu_suspend)
+
+/*
+ * Disables or Enables DDR2 LPSC
+ * Register Usage:
+ * 	r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC
+ * 	r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
+ * 	r2: contains PSC number for DDR2
+ */
+ENTRY(davinci_ddr_psc_config)
+	/* Set next state in mdctl for DDR2 */
+	mov	r6, #MDCTL
+	add	r6, r6, r2, lsl #2
+	ldr	ip, [r1, r6]
+	bic	ip, ip, #MDSTAT_STATE_MASK
+	orr	ip, ip, r0
+	str	ip, [r1, r6]
+
+	/* Enable the Power Domain Transition Command */
+	ldr	ip, [r1, #PTCMD]
+	orr	ip, ip, #0x1
+	str	ip, [r1, #PTCMD]
+
+	/* Check for Transition Complete (PTSTAT) */
+ptstat_done:
+	ldr	ip, [r1, #PTSTAT]
+	and	ip, ip, #0x1
+	cmp 	ip, #0x0
+	bne	ptstat_done
+
+	/* Check for DDR2 clock disable completion; */
+	mov	r6, #MDSTAT
+	add	r6, r6, r2, lsl #2
+ddr2clk_stop_done:
+	ldr	ip, [r1, r6]
+	and	ip, ip, #MDSTAT_STATE_MASK
+	cmp	ip, r0
+	bne	ddr2clk_stop_done
+
+	mov	pc, lr
+ENDPROC(davinci_ddr_psc_config)
+
+CACHE_FLUSH:
+	.word	arm926_flush_kern_cache_all
+
+ENTRY(davinci_cpu_suspend_sz)
+	.word	. - davinci_cpu_suspend
+ENDPROC(davinci_cpu_suspend_sz)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 42d985b..0f21c36 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -197,32 +197,36 @@ static void __init timer_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
+	void __iomem *base[2];
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = dtip[i].base;
+
+		base[i] = ioremap(dtip[i].base, SZ_4K);
+		if (WARN_ON(!base[i]))
+			continue;
 
 		/* Disabled, Internal clock source */
-		__raw_writel(0, base + TCR);
+		__raw_writel(0, base[i] + TCR);
 
 		/* reset both timers, no pre-scaler for timer34 */
 		tgcr = 0;
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Set both timers to unchained 32-bit */
 		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Unreset timers */
 		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Init both counters to zero */
-		__raw_writel(0, base + TIM12);
-		__raw_writel(0, base + TIM34);
+		__raw_writel(0, base[i] + TIM12);
+		__raw_writel(0, base[i] + TIM34);
 	}
 
 	/* Init of each timer as a 32-bit timer */
@@ -231,7 +235,9 @@ static void __init timer_init(void)
 		int timer = ID_TO_TIMER(t->id);
 		u32 irq;
 
-		t->base = dtip[timer].base;
+		t->base = base[timer];
+		if (!t->base)
+			continue;
 
 		if (IS_TIMER_BOT(t->id)) {
 			t->enamode_shift = 6;
@@ -253,8 +259,6 @@ static void __init timer_init(void)
 			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
 			setup_irq(irq, &t->irqaction);
 		}
-
-		timer32_config(&timers[i]);
 	}
 }
 
@@ -331,6 +335,7 @@ static void __init davinci_timer_init(void)
 	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
+	int i;
 
 	clockevent_id = soc_info->timer_info->clockevent_id;
 	clocksource_id = soc_info->timer_info->clocksource_id;
@@ -362,13 +367,13 @@ static void __init davinci_timer_init(void)
 		}
 	}
 
-	/* init timer hw */
-	timer_init();
-
 	timer_clk = clk_get(NULL, "timer0");
 	BUG_ON(IS_ERR(timer_clk));
 	clk_enable(timer_clk);
 
+	/* init timer hw */
+	timer_init();
+
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
@@ -389,6 +394,9 @@ static void __init davinci_timer_init(void)
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
+
+	for (i=0; i< ARRAY_SIZE(timers); i++)
+		timer32_config(&timers[i]);
 }
 
 struct sys_timer davinci_timer = {
@@ -397,13 +405,16 @@ struct sys_timer davinci_timer = {
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void)
+void davinci_watchdog_reset(struct platform_device *pdev)
 {
 	u32 tgcr, wdtcr;
-	struct platform_device *pdev = &davinci_wdt_device;
-	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
+	void __iomem *base;
 	struct clk *wd_clk;
 
+	base = ioremap(pdev->resource[0].start, SZ_4K);
+	if (WARN_ON(!base))
+		return;
+
 	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 806972a..5da2cf4 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -605,7 +605,7 @@ static struct platform_device dove_xor00_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor00_data,
+		.platform_data		= &dove_xor00_data,
 	},
 };
 
@@ -631,7 +631,7 @@ static struct platform_device dove_xor01_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor0_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor01_data,
+		.platform_data		= &dove_xor01_data,
 	},
 };
 
@@ -704,7 +704,7 @@ static struct platform_device dove_xor10_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor10_data,
+		.platform_data		= &dove_xor10_data,
 	},
 };
 
@@ -730,7 +730,7 @@ static struct platform_device dove_xor11_channel = {
 	.dev		= {
 		.dma_mask		= &dove_xor1_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&dove_xor11_data,
+		.platform_data		= &dove_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 9b89ec7..1521d13 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
index 8b2c974..a28792c 100644
--- a/arch/arm/mach-dove/include/mach/vmalloc.h
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-dove/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfd800000
+#define VMALLOC_END	0xfd800000UL
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 1dde822..ebbd89f 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xf0000000
 		orr	\rx, \rx, #0x00000be0
 		.endm
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 9167c3d..3a08b18 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -161,6 +161,20 @@ config MACH_MICRO9S
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Slim board.
 
+config MACH_SIM_ONE
+        bool "Support Simplemachines Sim.One board"
+        depends on EP93XX_SDCE0_PHYS_OFFSET
+        help
+          Say 'Y' here if you want your kernel to support the
+          Simplemachines Sim.One board.
+
+config MACH_SNAPPER_CL15
+	bool "Support Bluewater Systems Snapper CL15 Module"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	help
+	  Say 'Y' here if you want your kernel to support the Bluewater
+	  Systems Snapper CL15 Module.
+
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index eae6199..33ee2c8 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -10,4 +10,6 @@ obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
+obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
+obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index caf6d51..3a1a855 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = {
 	.resource	= &adssphere_flash_resource,
 };
 
-static struct ep93xx_eth_data adssphere_eth_data = {
+static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 1d0f9d8..e29bdef 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -10,6 +10,8 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -94,6 +96,10 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_spi = {
+	.parent		= &clk_xtali,
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_pwm = {
 	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -184,6 +190,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
+	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -445,37 +452,47 @@ static void __init ep93xx_dma_clock_init(void)
 static int __init ep93xx_clock_init(void)
 {
 	u32 value;
-	int i;
 
-	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
-	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
+	/* Determine the bootloader configured pll1 rate */
+	value = __raw_readl(EP93XX_SYSCON_CLKSET1);
+	if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
 		clk_pll1.rate = clk_xtali.rate;
-	} else {
+	else
 		clk_pll1.rate = calc_pll_rate(value);
-	}
+
+	/* Initialize the pll1 derived clocks */
 	clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
 	clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
 	clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
 	ep93xx_dma_clock_init();
 
-	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
-	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
+	/* Determine the bootloader configured pll2 rate */
+	value = __raw_readl(EP93XX_SYSCON_CLKSET2);
+	if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
 		clk_pll2.rate = clk_xtali.rate;
-	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
+	else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
 		clk_pll2.rate = calc_pll_rate(value);
-	} else {
+	else
 		clk_pll2.rate = 0;
-	}
+
+	/* Initialize the pll2 derived clocks */
 	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
 
-	printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
+	/*
+	 * EP93xx SSP clock rate was doubled in version E2. For more information
+	 * see:
+	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+	 */
+	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
+		clk_spi.rate /= 2;
+
+	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
 		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
-	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
+	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
 
-	for (i = 0; i < ARRAY_SIZE(clocks); i++)
-		clkdev_add(&clocks[i]);
+	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
 arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1f0d665..9092677 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -14,12 +14,15 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/timex.h>
+#include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
@@ -28,14 +31,15 @@
 #include <linux/amba/serial.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_keypad.h>
+#include <mach/ep93xx_spi.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/irq.h>
 
 #include <asm/hardware/vic.h>
 
@@ -82,13 +86,40 @@ void __init ep93xx_map_io(void)
  * to use this timer for something else.  We also use timer 4 for keeping
  * track of lost jiffies.
  */
-static unsigned int last_jiffy_time;
-
+#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
+#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
+#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
+#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
+#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_TIMER123_CLOCK		508469
+#define EP93XX_TIMER4_CLOCK		983040
+
+#define TIMER1_RELOAD			((EP93XX_TIMER123_CLOCK / HZ) - 1)
 #define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
+static unsigned int last_jiffy_time;
+
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
+	/* Writing any value clears the timer interrupt */
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
+
+	/* Recover lost jiffies */
 	while ((signed long)
 		(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
 						>= TIMER4_TICKS_PER_JIFFY) {
@@ -107,13 +138,18 @@ static struct irqaction ep93xx_timer_irq = {
 
 static void __init ep93xx_timer_init(void)
 {
+	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
+		    EP93XX_TIMER123_CONTROL_CLKSEL;
+
 	/* Enable periodic HZ timer.  */
-	__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
-	__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
-	__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
+	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
+	__raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
+			EP93XX_TIMER1_CONTROL);
 
 	/* Enable lost jiffy timer.  */
-	__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+	__raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
+			EP93XX_TIMER4_VALUE_HIGH);
 
 	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
@@ -135,237 +171,16 @@ struct sys_timer ep93xx_timer = {
 
 
 /*************************************************************************
- * GPIO handling for EP93xx
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
-
-void ep93xx_gpio_update_int_params(unsigned port)
-{
-	BUG_ON(port > 2);
-
-	__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
-	__raw_writeb(gpio_int_type2[port],
-		EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
-	__raw_writeb(gpio_int_type1[port],
-		EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
-	__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
-		EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-void ep93xx_gpio_int_mask(unsigned line)
-{
-	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
-{
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
-
-	if (enable)
-		gpio_int_debounce[port] |= port_mask;
-	else
-		gpio_int_debounce[port] &= ~port_mask;
-
-	__raw_writeb(gpio_int_debounce[port],
-		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
-
-/*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned char status;
-	int i;
-
-	status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
-	for (i = 0; i < 8; i++) {
-		if (status & (1 << i)) {
-			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
-			generic_handle_irq(gpio_irq);
-		}
-	}
-
-	status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
-	for (i = 0; i < 8; i++) {
-		if (status & (1 << i)) {
-			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-			generic_handle_irq(gpio_irq);
-		}
-	}
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	/*
-	 * map discontiguous hw irq range to continous sw irq range:
-	 *
-	 *  IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
-	 */
-	int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
-	int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
-	generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(unsigned int irq)
-{
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
-
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
-		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-		ep93xx_gpio_update_int_params(port);
-	}
-
-	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
-{
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-	int port_mask = 1 << (line & 7);
-
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
-	gpio_int_unmasked[port] &= ~port_mask;
-	ep93xx_gpio_update_int_params(port);
-
-	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(unsigned int irq)
-{
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-
-	gpio_int_unmasked[port] &= ~(1 << (line & 7));
-	ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(unsigned int irq)
-{
-	int line = irq_to_gpio(irq);
-	int port = line >> 3;
-
-	gpio_int_unmasked[port] |= 1 << (line & 7);
-	ep93xx_gpio_update_int_params(port);
-}
-
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-	struct irq_desc *desc = irq_desc + irq;
-	const int gpio = irq_to_gpio(irq);
-	const int port = gpio >> 3;
-	const int port_mask = 1 << (gpio & 7);
-
-	gpio_direction_input(gpio);
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		gpio_int_type1[port] |= port_mask;
-		gpio_int_type2[port] |= port_mask;
-		desc->handle_irq = handle_edge_irq;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		gpio_int_type1[port] |= port_mask;
-		gpio_int_type2[port] &= ~port_mask;
-		desc->handle_irq = handle_edge_irq;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		gpio_int_type1[port] &= ~port_mask;
-		gpio_int_type2[port] |= port_mask;
-		desc->handle_irq = handle_level_irq;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		gpio_int_type1[port] &= ~port_mask;
-		gpio_int_type2[port] &= ~port_mask;
-		desc->handle_irq = handle_level_irq;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		gpio_int_type1[port] |= port_mask;
-		/* set initial polarity based on current input level */
-		if (gpio_get_value(gpio))
-			gpio_int_type2[port] &= ~port_mask; /* falling */
-		else
-			gpio_int_type2[port] |= port_mask; /* rising */
-		desc->handle_irq = handle_edge_irq;
-		break;
-	default:
-		pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
-		       type, gpio);
-		return -EINVAL;
-	}
-
-	gpio_int_enabled[port] |= port_mask;
-
-	desc->status &= ~IRQ_TYPE_SENSE_MASK;
-	desc->status |= type & IRQ_TYPE_SENSE_MASK;
-
-	ep93xx_gpio_update_int_params(port);
-
-	return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
-	.name		= "GPIO",
-	.ack		= ep93xx_gpio_irq_ack,
-	.mask_ack	= ep93xx_gpio_irq_mask_ack,
-	.mask		= ep93xx_gpio_irq_mask,
-	.unmask		= ep93xx_gpio_irq_unmask,
-	.set_type	= ep93xx_gpio_irq_type,
-};
-
+extern void ep93xx_gpio_init_irq(void);
 
 void __init ep93xx_init_irq(void)
 {
-	int gpio_irq;
-
 	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
 	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
-	for (gpio_irq = gpio_to_irq(0);
-	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
-		set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
-		set_irq_handler(gpio_irq, handle_level_irq);
-		set_irq_flags(gpio_irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
-	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+	ep93xx_gpio_init_irq();
 }
 
 
@@ -409,6 +224,20 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 }
 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
 
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See <mach/platform.h> for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
+{
+	unsigned int v;
+
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+	return v;
+}
 
 /*************************************************************************
  * EP93xx peripheral handling
@@ -517,6 +346,10 @@ static struct platform_device ep93xx_ohci_device = {
 	.resource	= ep93xx_ohci_resources,
 };
 
+
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
 
 static struct resource ep93xx_eth_resource[] = {
@@ -541,6 +374,12 @@ static struct platform_device ep93xx_eth_device = {
 	.resource	= ep93xx_eth_resource,
 };
 
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data:	platform specific ethernet configuration (__initdata)
+ * @copy_addr:	flag indicating that the MAC address should be copied
+ *		from the IndAd registers (as programmed by the bootloader)
+ */
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
 	if (copy_addr)
@@ -557,11 +396,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &ep93xx_i2c_data,
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_i2c_data,
+	},
 };
 
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @data:	platform specific i2c-gpio configuration (__initdata)
+ * @devices:	platform specific i2c bus device information (__initdata)
+ * @num:	the number of devices on the i2c bus
+ */
 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 				struct i2c_board_info *devices, int num)
 {
@@ -572,9 +419,9 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 	 * CMOS driver.
 	 */
 	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
-		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+		pr_warning("sda != EEDAT, open drain has no effect\n");
 	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
-		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+		pr_warning("scl != EECLK, open drain has no effect\n");
 
 	__raw_writel((data->sda_is_open_drain << 1) |
 		     (data->scl_is_open_drain << 0),
@@ -585,17 +432,67 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+
+static struct resource ep93xx_spi_resources[] = {
+	{
+		.start	= EP93XX_SPI_PHYS_BASE,
+		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EP93XX_SSP,
+		.end	= IRQ_EP93XX_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_spi_device = {
+	.name		= "ep93xx-spi",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ep93xx_spi_master_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
+	.resource	= ep93xx_spi_resources,
+};
+
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+				struct spi_board_info *devices, int num)
+{
+	/*
+	 * When SPI is used, we need to make sure that I2S is muxed off from
+	 * SPI pins.
+	 */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+
+	ep93xx_spi_master_data = *info;
+	spi_register_board_info(devices, num);
+	platform_device_register(&ep93xx_spi_device);
+}
 
 /*************************************************************************
  * EP93xx LEDs
  *************************************************************************/
 static struct gpio_led ep93xx_led_pins[] = {
 	{
-		.name			= "platform:grled",
-		.gpio			= EP93XX_GPIO_LINE_GRLED,
+		.name	= "platform:grled",
+		.gpio	= EP93XX_GPIO_LINE_GRLED,
 	}, {
-		.name			= "platform:rdled",
-		.gpio			= EP93XX_GPIO_LINE_RDLED,
+		.name	= "platform:rdled",
+		.gpio	= EP93XX_GPIO_LINE_RDLED,
 	},
 };
 
@@ -715,7 +612,7 @@ static struct platform_device ep93xx_fb_device = {
 	.name			= "ep93xx-fb",
 	.id			= -1,
 	.dev			= {
-		.platform_data	= &ep93xxfb_data,
+		.platform_data		= &ep93xxfb_data,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
 	},
@@ -723,6 +620,10 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data:	platform specific framebuffer configuration (__initdata)
+ */
 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
@@ -733,6 +634,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 /*************************************************************************
  * EP93xx matrix keypad peripheral handling
  *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
+
 static struct resource ep93xx_keypad_resource[] = {
 	{
 		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
@@ -746,15 +649,22 @@ static struct resource ep93xx_keypad_resource[] = {
 };
 
 static struct platform_device ep93xx_keypad_device = {
-	.name			= "ep93xx-keypad",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource		= ep93xx_keypad_resource,
+	.name		= "ep93xx-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_keypad_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource	= ep93xx_keypad_resource,
 };
 
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data:	platform specific keypad configuration (__initdata)
+ */
 void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 {
-	ep93xx_keypad_device.dev.platform_data = data;
+	ep93xx_keypad_data = *data;
 	platform_device_register(&ep93xx_keypad_device);
 }
 
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index dbcac9c..8904ca4 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -28,6 +28,8 @@
  * with this implementation.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -173,7 +175,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 
 	switch (m2p_channel_state(ch)) {
 	case STATE_IDLE:
-		pr_crit("m2p_irq: dma interrupt without a dma buffer\n");
+		pr_crit("dma interrupt without a dma buffer\n");
 		BUG();
 		break;
 
@@ -197,7 +199,7 @@ static irqreturn_t m2p_irq(int irq, void *dev_id)
 		break;
 
 	case STATE_NEXT:
-		pr_crit("m2p_irq: dma interrupt while next\n");
+		pr_crit("dma interrupt while next\n");
 		BUG();
 		break;
 	}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index a4a7be3..3884182 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void)
 	}
 }
 
-static struct ep93xx_eth_data edb93xx_eth_data = {
+static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
@@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 /*************************************************************************
  * EDB93xx i2c peripheral handling
  *************************************************************************/
-static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
@@ -118,12 +118,33 @@ static void __init edb93xx_register_i2c(void)
 	}
 }
 
+
+/*************************************************************************
+ * EDB93xx pwm
+ *************************************************************************/
+static void __init edb93xx_register_pwm(void)
+{
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() || machine_is_edb9302a()) {
+		/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
+		ep93xx_register_pwm(0, 1);
+	} else if (machine_is_edb9307() || machine_is_edb9307a()) {
+		/* EP9307 only has pwm.0 (PWMOUT) */
+		ep93xx_register_pwm(1, 0);
+	} else {
+		/* EP9312 and EP9315 have both */
+		ep93xx_register_pwm(1, 1);
+	}
+}
+
+
 static void __init edb93xx_init_machine(void)
 {
 	ep93xx_init_devices();
 	edb93xx_register_flash();
 	ep93xx_register_eth(&edb93xx_eth_data, 1);
 	edb93xx_register_i2c();
+	edb93xx_register_pwm();
 }
 
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3da7ca8..a809618 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = {
 	.resource	= &gesbc9312_flash_resource,
 };
 
-static struct ep93xx_eth_data gesbc9312_eth_data = {
+static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 1ea8871..cf547ad 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -13,6 +13,8 @@
  *  published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
@@ -22,6 +24,235 @@
 
 #include <mach/hardware.h>
 
+/*************************************************************************
+ * Interrupt handling for EP93xx on-chip GPIOs
+ *************************************************************************/
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
+static unsigned char gpio_int_debounce[3];
+
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
+static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
+
+static void ep93xx_gpio_update_int_params(unsigned port)
+{
+	BUG_ON(port > 2);
+
+	__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+
+	__raw_writeb(gpio_int_type2[port],
+		EP93XX_GPIO_REG(int_type2_register_offset[port]));
+
+	__raw_writeb(gpio_int_type1[port],
+		EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+	__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+		EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+static inline void ep93xx_gpio_int_mask(unsigned line)
+{
+	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+}
+
+void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+	int port_mask = 1 << (line & 7);
+
+	if (enable)
+		gpio_int_debounce[port] |= port_mask;
+	else
+		gpio_int_debounce[port] &= ~port_mask;
+
+	__raw_writeb(gpio_int_debounce[port],
+		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
+}
+EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
+
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned char status;
+	int i;
+
+	status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+	for (i = 0; i < 8; i++) {
+		if (status & (1 << i)) {
+			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+			generic_handle_irq(gpio_irq);
+		}
+	}
+
+	status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+	for (i = 0; i < 8; i++) {
+		if (status & (1 << i)) {
+			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+			generic_handle_irq(gpio_irq);
+		}
+	}
+}
+
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	/*
+	 * map discontiguous hw irq range to continous sw irq range:
+	 *
+	 *  IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+	 */
+	int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+	int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
+
+	generic_handle_irq(gpio_irq);
+}
+
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+	int port_mask = 1 << (line & 7);
+
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
+		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+		ep93xx_gpio_update_int_params(port);
+	}
+
+	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+	int port_mask = 1 << (line & 7);
+
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
+		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+	gpio_int_unmasked[port] &= ~port_mask;
+	ep93xx_gpio_update_int_params(port);
+
+	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
+static void ep93xx_gpio_irq_mask(unsigned int irq)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	ep93xx_gpio_update_int_params(port);
+}
+
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
+{
+	int line = irq_to_gpio(irq);
+	int port = line >> 3;
+
+	gpio_int_unmasked[port] |= 1 << (line & 7);
+	ep93xx_gpio_update_int_params(port);
+}
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	const int gpio = irq_to_gpio(irq);
+	const int port = gpio >> 3;
+	const int port_mask = 1 << (gpio & 7);
+
+	gpio_direction_input(gpio);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		gpio_int_type1[port] |= port_mask;
+		gpio_int_type2[port] |= port_mask;
+		desc->handle_irq = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		gpio_int_type1[port] |= port_mask;
+		gpio_int_type2[port] &= ~port_mask;
+		desc->handle_irq = handle_edge_irq;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		gpio_int_type1[port] &= ~port_mask;
+		gpio_int_type2[port] |= port_mask;
+		desc->handle_irq = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		gpio_int_type1[port] &= ~port_mask;
+		gpio_int_type2[port] &= ~port_mask;
+		desc->handle_irq = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		gpio_int_type1[port] |= port_mask;
+		/* set initial polarity based on current input level */
+		if (gpio_get_value(gpio))
+			gpio_int_type2[port] &= ~port_mask; /* falling */
+		else
+			gpio_int_type2[port] |= port_mask; /* rising */
+		desc->handle_irq = handle_edge_irq;
+		break;
+	default:
+		pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
+		return -EINVAL;
+	}
+
+	gpio_int_enabled[port] |= port_mask;
+
+	desc->status &= ~IRQ_TYPE_SENSE_MASK;
+	desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
+	ep93xx_gpio_update_int_params(port);
+
+	return 0;
+}
+
+static struct irq_chip ep93xx_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= ep93xx_gpio_irq_ack,
+	.mask_ack	= ep93xx_gpio_irq_mask_ack,
+	.mask		= ep93xx_gpio_irq_mask,
+	.unmask		= ep93xx_gpio_irq_unmask,
+	.set_type	= ep93xx_gpio_irq_type,
+};
+
+void __init ep93xx_gpio_init_irq(void)
+{
+	int gpio_irq;
+
+	for (gpio_irq = gpio_to_irq(0);
+	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+		set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+		set_irq_handler(gpio_irq, handle_level_irq);
+		set_irq_flags(gpio_irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
+}
+
+
+/*************************************************************************
+ * gpiolib interface for EP93xx on-chip GPIOs
+ *************************************************************************/
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
@@ -31,10 +262,6 @@ struct ep93xx_gpio_chip {
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
 
-/* From core.c */
-extern void ep93xx_gpio_int_mask(unsigned line);
-extern void ep93xx_gpio_update_int_params(unsigned port);
-
 static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 802858b..5cd2244 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index d55194a..b1e096f 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -92,21 +92,6 @@
 
 /* APB peripherals */
 #define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
 #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
@@ -121,6 +106,7 @@
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
+#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
 #define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
@@ -167,8 +153,11 @@
 #define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
+#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
+#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
 #define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
 #define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
 #define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
index 62d1742..1e2f4e9 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
@@ -5,6 +5,8 @@
 #ifndef __ASM_ARCH_EP93XX_KEYPAD_H
 #define __ASM_ARCH_EP93XX_KEYPAD_H
 
+struct matrix_keymap_data;
+
 /* flags for the ep93xx_keypad driver */
 #define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
 #define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
@@ -15,15 +17,13 @@
 
 /**
  * struct ep93xx_keypad_platform_data - platform specific device structure
- * @matrix_key_map:		array of keycodes defining the keypad matrix
- * @matrix_key_map_size:	ARRAY_SIZE(matrix_key_map)
- * @debounce:			debounce start count; terminal count is 0xff
- * @prescale:			row/column counter pre-scaler load value
- * @flags:			see above
+ * @keymap_data:	pointer to &matrix_keymap_data
+ * @debounce:		debounce start count; terminal count is 0xff
+ * @prescale:		row/column counter pre-scaler load value
+ * @flags:		see above
  */
 struct ep93xx_keypad_platform_data {
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
+	struct matrix_keymap_data *keymap_data;
 	unsigned int	debounce;
 	unsigned int	prescale;
 	unsigned int	flags;
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
new file mode 100644
index 0000000..0a37961
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_MACH_EP93XX_SPI_H
+#define __ASM_MACH_EP93XX_SPI_H
+
+struct spi_device;
+
+/**
+ * struct ep93xx_spi_info - EP93xx specific SPI descriptor
+ * @num_chipselect: number of chip selects on this board, must be
+ *                  at least one
+ */
+struct ep93xx_spi_info {
+	int	num_chipselect;
+};
+
+/**
+ * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
+ * @setup: setup the chip select mechanism
+ * @cleanup: cleanup the chip select mechanism
+ * @cs_control: control the device chip select
+ */
+struct ep93xx_spi_chip_ops {
+	int	(*setup)(struct spi_device *spi);
+	void	(*cleanup)(struct spi_device *spi);
+	void	(*cs_control)(struct spi_device *spi, int value);
+};
+
+#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index c6dc14d..9a4413d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -6,9 +6,11 @@
 
 struct i2c_gpio_platform_data;
 struct i2c_board_info;
+struct spi_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
 struct ep93xx_keypad_platform_data;
+struct ep93xx_spi_info;
 
 struct ep93xx_eth_data
 {
@@ -33,9 +35,19 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 	ep93xx_devcfg_set_clear(0x00, bits);
 }
 
+#define EP93XX_CHIP_REV_D0	3
+#define EP93XX_CHIP_REV_D1	4
+#define EP93XX_CHIP_REV_E0	5
+#define EP93XX_CHIP_REV_E1	6
+#define EP93XX_CHIP_REV_E2	7
+
+unsigned int ep93xx_chip_revision(void);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
+void ep93xx_register_spi(struct ep93xx_spi_info *info,
+			 struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 3bd934e..0eabec6 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -9,9 +9,6 @@
  * febff000	22000000	4K	model number register
  * febfe000	22400000	4K	options register
  * febfd000	22800000	4K	options register #2
- * febfc000	[67]0000000	4K	NAND data register
- * febfb000	[67]0400000	4K	NAND control register
- * febfa000	[67]0800000	4K	NAND busy register
  * febf9000	10800000	4K	TS-5620 RTC index register
  * febf8000	11700000	4K	TS-5620 RTC data register
  */
@@ -41,22 +38,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
-#define TS72XX_NAND_DATA_SIZE		0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE	0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE		0x00001000
-
-
 #define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
 #define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
 #define TS72XX_RTC_INDEX_SIZE		0x00001000
@@ -65,6 +46,8 @@
 #define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
 #define TS72XX_RTC_DATA_SIZE		0x00001000
 
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
index aed21cd..1b3f25d 100644
--- a/arch/arm/mach-ep93xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-ep93xx/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe800000
+#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1..1cc911b 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
  *
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
@@ -80,7 +80,7 @@ static void __init micro9_register_flash(void)
 /*************************************************************************
  * Micro9 Ethernet
  *************************************************************************/
-static struct ep93xx_eth_data micro9_eth_data = {
+static struct ep93xx_eth_data __initdata micro9_eth_data = {
 	.phy_id		= 0x1f,
 };
 
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
new file mode 100644
index 0000000..388aec9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ep93xx/simone.c
+ * Simplemachines Sim.One support.
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the 2.6.24.7 support:
+ *   Copyright (C) 2009 Simplemachines
+ *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data simone_flash_data = {
+	.width		= 2,
+};
+
+static struct resource simone_flash_resource = {
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device simone_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &simone_flash_resource,
+	.dev = {
+		.platform_data	= &simone_flash_data,
+	},
+};
+
+static struct ep93xx_eth_data __initdata simone_eth_data = {
+	.phy_id		= 1,
+};
+
+static struct ep93xxfb_mach_info __initdata simone_fb_info = {
+	.num_modes	= EP93XXFB_USE_MODEDB,
+	.bpp		= 16,
+	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+};
+
+static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,
+	.timeout		= 0,
+};
+
+static struct i2c_board_info __initdata simone_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static void __init simone_init_machine(void)
+{
+	ep93xx_init_devices();
+
+	platform_device_register(&simone_flash);
+	ep93xx_register_eth(&simone_eth_data, 1);
+	ep93xx_register_fb(&simone_fb_info);
+	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+			    ARRAY_SIZE(simone_i2c_board_info));
+}
+
+MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
+/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= simone_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
new file mode 100644
index 0000000..38deaee
--- /dev/null
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-ep93xx/snappercl15.c
+ * Bluewater Systems Snapper CL15 system module
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * NAND code adapted from driver by:
+ *   Andre Renaud <andre@bluewatersys.com>
+ *   James R. McKaskill
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/fb.h>
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
+
+#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
+#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
+#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
+#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
+#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
+
+#define NAND_CTRL_ADDR(chip) 	(chip->IO_ADDR_W + 0x40)
+
+static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				      unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	static u16 nand_state = SNAPPERCL15_NAND_WPN;
+	u16 set;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
+
+		if (ctrl & NAND_NCE)
+			set &= ~SNAPPERCL15_NAND_CEN;
+		if (ctrl & NAND_CLE)
+			set |= SNAPPERCL15_NAND_CLE;
+		if (ctrl & NAND_ALE)
+			set |= SNAPPERCL15_NAND_ALE;
+
+		nand_state &= ~(SNAPPERCL15_NAND_CEN |
+				SNAPPERCL15_NAND_CLE |
+				SNAPPERCL15_NAND_ALE);
+		nand_state |= set;
+		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		__raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
+}
+
+static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
+}
+
+static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
+
+static struct mtd_partition snappercl15_nand_parts[] = {
+	{
+		.name		= "Kernel",
+		.offset		= 0,
+		.size		= SZ_2M,
+	},
+	{
+		.name		= "Filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct platform_nand_data snappercl15_nand_data = {
+	.chip = {
+		.nr_chips		= 1,
+		.part_probe_types	= snappercl15_nand_part_probes,
+		.partitions		= snappercl15_nand_parts,
+		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
+		.options		= NAND_NO_AUTOINCR,
+		.chip_delay		= 25,
+	},
+	.ctrl = {
+		.dev_ready		= snappercl15_nand_dev_ready,
+		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
+	},
+};
+
+static struct resource snappercl15_nand_resource[] = {
+	{
+		.start		= SNAPPERCL15_NAND_BASE,
+		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device snappercl15_nand_device = {
+	.name			= "gen_nand",
+	.id			= -1,
+	.dev.platform_data	= &snappercl15_nand_data,
+	.resource		= snappercl15_nand_resource,
+	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
+};
+
+static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
+	.phy_id			= 1,
+};
+
+static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,
+	.timeout		= 0,
+};
+
+static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
+	{
+		/* Audio codec */
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
+	.num_modes		= EP93XXFB_USE_MODEDB,
+	.bpp			= 16,
+};
+
+static void __init snappercl15_init_machine(void)
+{
+	ep93xx_init_devices();
+	ep93xx_register_eth(&snappercl15_eth_data, 1);
+	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+			    ARRAY_SIZE(snappercl15_i2c_data));
+	ep93xx_register_fb(&snappercl15_fb_info);
+	platform_device_register(&snappercl15_nand_device);
+}
+
+MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
+	/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer 		= &ep93xx_timer,
+	.init_machine	= snappercl15_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 259f782..ae7319e 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -10,12 +10,16 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
@@ -54,92 +58,162 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
 	}
 };
 
-static struct map_desc ts72xx_nand_io_desc[] __initdata = {
-	{
-		.virtual	= TS72XX_NAND_DATA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
-		.length		= TS72XX_NAND_DATA_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_NAND_CONTROL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
-		.length		= TS72XX_NAND_CONTROL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_NAND_BUSY_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
-		.length		= TS72XX_NAND_BUSY_SIZE,
-		.type		= MT_DEVICE,
+static void __init ts72xx_map_io(void)
+{
+	ep93xx_map_io();
+	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+}
+
+
+/*************************************************************************
+ * NAND flash
+ *************************************************************************/
+#define TS72XX_NAND_CONTROL_ADDR_LINE	22	/* 0xN0400000 */
+#define TS72XX_NAND_BUSY_ADDR_LINE	23	/* 0xN0800000 */
+
+static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
+				  int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		void __iomem *addr = chip->IO_ADDR_R;
+		unsigned char bits;
+
+		addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
+
+		bits = __raw_readb(addr) & ~0x07;
+		bits |= (ctrl & NAND_NCE) << 2;	/* bit 0 -> bit 2 */
+		bits |= (ctrl & NAND_CLE);	/* bit 1 -> bit 1 */
+		bits |= (ctrl & NAND_ALE) >> 2;	/* bit 2 -> bit 0 */
+
+		__raw_writeb(bits, addr);
 	}
-};
 
-static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int ts72xx_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *addr = chip->IO_ADDR_R;
+
+	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
+
+	return !!(__raw_readb(addr) & 0x20);
+}
+
+static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
+
+#define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
+#define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
+
+static struct mtd_partition ts72xx_nand_parts[] = {
 	{
-		.virtual	= TS72XX_NAND_DATA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
-		.length		= TS72XX_NAND_DATA_SIZE,
-		.type		= MT_DEVICE,
+		.name		= "TS-BOOTROM",
+		.offset		= 0,
+		.size		= TS72XX_BOOTROM_PART_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	}, {
-		.virtual	= TS72XX_NAND_CONTROL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
-		.length		= TS72XX_NAND_CONTROL_SIZE,
-		.type		= MT_DEVICE,
+		.name		= "Linux",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 0,			/* filled in later */
 	}, {
-		.virtual	= TS72XX_NAND_BUSY_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
-		.length		= TS72XX_NAND_BUSY_SIZE,
-		.type		= MT_DEVICE,
-	}
+		.name		= "RedBoot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
 };
 
-static void __init ts72xx_map_io(void)
+static void ts72xx_nand_set_parts(uint64_t size,
+				  struct platform_nand_chip *chip)
 {
-	ep93xx_map_io();
-	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+	/* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
+	if (size == SZ_32M || size == SZ_128M) {
+		/* Set the "Linux" partition size */
+		ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
 
-	/*
-	 * The TS-7200 has NOR flash, the other models have NAND flash.
-	 */
-	if (!board_is_ts7200()) {
-		if (is_ts9420_installed()) {
-			iotable_init(ts72xx_alternate_nand_io_desc,
-				ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
-		} else {
-			iotable_init(ts72xx_nand_io_desc,
-				ARRAY_SIZE(ts72xx_nand_io_desc));
-		}
+		chip->partitions = ts72xx_nand_parts;
+		chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
+	} else {
+		pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
 	}
 }
 
+static struct platform_nand_data ts72xx_nand_data = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.chip_delay	= 15,
+		.part_probe_types = ts72xx_nand_part_probes,
+		.set_parts	= ts72xx_nand_set_parts,
+	},
+	.ctrl = {
+		.cmd_ctrl	= ts72xx_nand_hwcontrol,
+		.dev_ready	= ts72xx_nand_device_ready,
+	},
+};
+
+static struct resource ts72xx_nand_resource[] = {
+	{
+		.start		= 0,			/* filled in later */
+		.end		= 0,			/* filled in later */
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ts72xx_nand_flash = {
+	.name			= "gen_nand",
+	.id			= -1,
+	.dev.platform_data	= &ts72xx_nand_data,
+	.resource		= ts72xx_nand_resource,
+	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
+};
+
+
 /*************************************************************************
  * NOR flash (TS-7200 only)
  *************************************************************************/
-static struct physmap_flash_data ts72xx_flash_data = {
+static struct physmap_flash_data ts72xx_nor_data = {
 	.width		= 2,
 };
 
-static struct resource ts72xx_flash_resource = {
+static struct resource ts72xx_nor_resource = {
 	.start		= EP93XX_CS6_PHYS_BASE,
 	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device ts72xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ts72xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ts72xx_flash_resource,
+static struct platform_device ts72xx_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev.platform_data	= &ts72xx_nor_data,
+	.resource		= &ts72xx_nor_resource,
+	.num_resources		= 1,
 };
 
 static void __init ts72xx_register_flash(void)
 {
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	if (board_is_ts7200()) {
+		platform_device_register(&ts72xx_nor_flash);
+	} else {
+		resource_size_t start;
+
+		if (is_ts9420_installed())
+			start = EP93XX_CS7_PHYS_BASE;
+		else
+			start = EP93XX_CS6_PHYS_BASE;
+
+		ts72xx_nand_resource[0].start = start;
+		ts72xx_nand_resource[0].end = start + SZ_16M - 1;
+
+		platform_device_register(&ts72xx_nand_flash);
+	}
 }
 
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -166,7 +240,27 @@ static struct platform_device ts72xx_rtc_device = {
 	.num_resources	= 0,
 };
 
-static struct ep93xx_eth_data ts72xx_eth_data = {
+static struct resource ts72xx_wdt_resources[] = {
+	{
+		.start	= TS72XX_WDT_CONTROL_PHYS_BASE,
+		.end	= TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= TS72XX_WDT_FEED_PHYS_BASE,
+		.end	= TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ts72xx_wdt_device = {
+	.name		= "ts72xx-wdt",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(ts72xx_wdt_resources),
+	.resource	= ts72xx_wdt_resources,
+};
+
+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
 	.phy_id		= 1,
 };
 
@@ -175,6 +269,7 @@ static void __init ts72xx_init_machine(void)
 	ep93xx_init_devices();
 	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
+	platform_device_register(&ts72xx_wdt_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);
 }
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 41febc7..88b3dd8 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -32,12 +32,13 @@ unsigned int mem_fclk_21285 = 50000000;
 
 EXPORT_SYMBOL(mem_fclk_21285);
 
-static void __init early_fclk(char **arg)
+static int __init early_fclk(char *arg)
 {
-	mem_fclk_21285 = simple_strtoul(*arg, arg, 0);
+	mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
+	return 0;
 }
 
-__early_param("mem_fclk_21285=", early_fclk);
+early_param("mem_fclk_21285", early_fclk);
 
 static int __init parse_tag_memclk(const struct tag *tag)
 {
@@ -231,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt);
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 720c0ba..e5ab5bd 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -20,9 +20,9 @@ static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
 		switch (PCI_FUNC(dev->devfn)) {
-			case 1:	return 14;
-			case 2:	return 15;
-			case 3:	return 12;
+		case 1:	return 14;
+		case 2:	return 15;
+		case 3:	return 12;
 		}
 
 	return irqmap_ebsa285[(slot + pin) & 3];
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 4329b81..60dda13 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x7c000000	@ physical
@@ -32,7 +32,7 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x42000000
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index e726385..fe3bd5a 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index d04a6ea..ad47704 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =GEMINI_UART_BASE			@ physical
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
index 83e536d..45371eb 100644
--- a/arch/arm/mach-gemini/include/mach/vmalloc.h
+++ b/arch/arm/mach-gemini/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * (at your option) any later version.
  */
 
-#define VMALLOC_END	0xF0000000
+#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 7a26148..bdb3f67 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index d8798db..7dd5fa6 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -14,13 +14,13 @@
  */
 
 extern unsigned long h720x_gettimeoffset(void);
-extern void __init h720x_init_irq (void);
+extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
 
 #ifdef CONFIG_ARCH_H7202
 extern struct sys_timer h7202_timer;
 extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq (void);
+extern void __init h7202_init_irq(void);
 extern void __init h7202_init_time(void);
 #endif
 
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 6294a13..27cafd1 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -11,10 +11,12 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
 
-		.macro  addruart,rx
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
+
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1  	       @ MMU enabled?
 		moveq   \rx, #io_phys	       @ physical base address
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index df97d16..27db275 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP
 config ARCH_INTEGRATOR_CP
 	bool "Support Integrator/CP platform"
 	select ARCH_CINTEGRATOR
+	select ARM_TIMER_SP804
 	help
 	  Include support for the ARM(R) Integrator CP platform.
 
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 6a5ef8d..ebeef96 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y					:= clock.o core.o lm.o
+obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
deleted file mode 100644
index 989ecf5..0000000
--- a/arch/arm/mach-integrator/clock.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst525_vco vco;
-	vco = icst525_khz_to_vco(clk->params, rate / 1000);
-	return icst525_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst525_vco vco;
-
-		vco = icst525_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst525_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
deleted file mode 100644
index 609c49d..0000000
--- a/arch/arm/mach-integrator/common.h
+++ /dev/null
@@ -1,2 +0,0 @@
-extern void integrator_time_init(unsigned long, unsigned int);
-extern unsigned long integrator_gettimeoffset(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index a0f60e5..b02cfc0 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -24,15 +24,13 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
 #include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 static struct amba_pl010_data integrator_uart_data;
 
 static struct amba_device rtc_device = {
@@ -144,8 +142,7 @@ static int __init integrator_init(void)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -164,8 +161,8 @@ arch_initcall(integrator_init);
  *  UART0  7    6
  *  UART1  5    4
  */
-#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
 
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
@@ -197,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
+#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
 
 static DEFINE_SPINLOCK(cm_lock);
 
@@ -218,120 +215,3 @@ void cm_control(u32 mask, u32 set)
 }
 
 EXPORT_SYMBOL(cm_control);
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
-#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
-#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
-#define VA_IC_BASE     IO_ADDRESS(INTEGRATOR_IC_BASE) 
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static unsigned long timer_reload;
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-unsigned long integrator_gettimeoffset(void)
-{
-	unsigned long ticks1, ticks2, status;
-
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for
-	 * an interrupt.  We get around this by ensuring that the
-	 * counter has not reloaded between our two reads.
-	 */
-	ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	do {
-		ticks1 = ticks2;
-		status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-		ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	} while (ticks2 > ticks1);
-
-	/*
-	 * Number of ticks since last interrupt.
-	 */
-	ticks1 = timer_reload - ticks2;
-
-	/*
-	 * Interrupt pending?  If so, we've reloaded once already.
-	 */
-	if (status & (1 << IRQ_TIMERINT1))
-		ticks1 += timer_reload;
-
-	/*
-	 * Convert the ticks to usecs
-	 */
-	return TICKS2USECS(ticks1);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-integrator_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * clear the interrupt
-	 */
-	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction integrator_timer_irq = {
-	.name		= "Integrator Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
-{
-	unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-
-	timer_reload = reload;
-	timer_ctrl |= ctrl;
-
-	if (timer_reload > 0x100000) {
-		timer_reload >>= 8;
-		timer_ctrl |= TIMER_CTRL_DIV256;
-	} else if (timer_reload > 0x010000) {
-		timer_reload >>= 4;
-		timer_ctrl |= TIMER_CTRL_DIV16;
-	}
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
-	writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
-}
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 44d4c2e..a3fbcb3 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -13,39 +13,45 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 
 static struct cpufreq_driver integrator_driver;
 
-#define CM_ID  	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET)
-#define CM_OSC	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET)
-#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET)
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
+#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
+#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
+#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
 
-static const struct icst525_params lclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params lclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 8,
 	.vd_max		= 132,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static const struct icst525_params cclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 160,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
 /*
@@ -53,17 +59,17 @@ static const struct icst525_params cclk_params = {
  */
 static int integrator_verify_policy(struct cpufreq_policy *policy)
 {
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
 				     policy->cpuinfo.max_freq);
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->max);
-	policy->max = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
+	policy->max = icst_hz(&cclk_params, vco) / 1000;
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->min);
-	policy->min = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
+	policy->min = icst_hz(&cclk_params, vco) / 1000;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
@@ -79,7 +85,7 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 {
 	cpumask_t cpus_allowed;
 	int cpu = policy->cpu;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 	struct cpufreq_freqs freqs;
 	u_int cm_osc;
 
@@ -105,17 +111,17 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 	}
 	vco.v = cm_osc & 255;
 	vco.r = 22;
-	freqs.old = icst525_khz(&cclk_params, vco);
+	freqs.old = icst_hz(&cclk_params, vco) / 1000;
 
-	/* icst525_khz_to_vco rounds down -- so we need the next
+	/* icst_hz_to_vco rounds down -- so we need the next
 	 * larger freq in case of CPUFREQ_RELATION_L.
 	 */
 	if (relation == CPUFREQ_RELATION_L)
 		target_freq += 999;
 	if (target_freq > policy->max)
 		target_freq = policy->max;
-	vco = icst525_khz_to_vco(&cclk_params, target_freq);
-	freqs.new = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
+	freqs.new = icst_hz(&cclk_params, vco) / 1000;
 
 	freqs.cpu = policy->cpu;
 
@@ -155,7 +161,7 @@ static unsigned int integrator_get(unsigned int cpu)
 	cpumask_t cpus_allowed;
 	unsigned int current_freq;
 	u_int cm_osc;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpus_allowed = current->cpus_allowed;
 
@@ -173,7 +179,7 @@ static unsigned int integrator_get(unsigned int cpu)
 	vco.v = cm_osc & 255;
 	vco.r = 22;
 
-	current_freq = icst525_khz(&cclk_params, vco); /* current freq */
+	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
 
 	set_cpus_allowed(current, cpus_allowed);
 
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0058c93..fd684bf 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,10 +21,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -40,32 +41,25 @@ struct impd1_module {
 	struct clk_lookup *clks[3];
 };
 
-static const struct icst525_params impd1_vco_params = {
-	.ref		= 24000,	/* 24 MHz */
-	.vco_max	= 200000,	/* 200 MHz */
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 519,
 	.rd_min		= 3,
 	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
+static void impd1_setvco(struct clk *clk, struct icst_vco vco)
 {
 	struct impd1_module *impd1 = clk->data;
-	int vconr = clk - impd1->vcos;
-	u32 val;
-
-	val = vco.v | (vco.r << 9) | (vco.s << 16);
+	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	switch (vconr) {
-	case 0:
-		writel(val, impd1->base + IMPD1_OSC1);
-		break;
-	case 1:
-		writel(val, impd1->base + IMPD1_OSC2);
-		break;
-	}
+	writel(val, clk->vcoreg);
 	writel(0, impd1->base + IMPD1_LOCK);
 
 #ifdef DEBUG
@@ -73,11 +67,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
 
-	pr_debug("IM-PD1: VCO%d clock is %ld kHz\n",
-		 vconr, icst525_khz(&impd1_vco_params, vco));
+	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
+		 vconr, icst525_hz(&impd1_vco_params, vco));
 #endif
 }
 
+static const struct clk_ops impd1_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= impd1_setvco,
+};
+
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
 {
 	struct impd1_module *impd1 = dev_get_drvdata(dev);
@@ -373,11 +373,13 @@ static int impd1_probe(struct lm_device *dev)
 		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+		impd1->vcos[i].ops = &impd1_clk_ops,
 		impd1->vcos[i].owner = THIS_MODULE,
 		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1,
-		impd1->vcos[i].setvco = impd1_setvco;
+		impd1->vcos[i].data = impd1;
 	}
+	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
+	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
 
 	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
 					dev->id);
diff --git a/arch/arm/mach-integrator/include/mach/clkdev.h b/arch/arm/mach-integrator/include/mach/clkdev.h
index 9293e41..bfe0767 100644
--- a/arch/arm/mach-integrator/include/mach/clkdev.h
+++ b/arch/arm/mach-integrator/include/mach/clkdev.h
@@ -2,14 +2,15 @@
 #define __ASM_MACH_CLKDEV_H
 
 #include <linux/module.h>
-#include <asm/hardware/icst525.h>
+#include <plat/clock.h>
 
 struct clk {
 	unsigned long		rate;
+	const struct clk_ops	*ops;
 	struct module		*owner;
-	const struct icst525_params *params;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
 	void			*data;
-	void			(*setvco)(struct clk *, struct icst525_vco vco);
 };
 
 static inline int __clk_get(struct clk *clk)
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index d347d65..87a6888 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x16000000	@ physical base address
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
index 7649c57..3d029c9 100644
--- a/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <mach/irqs.h>
 
  		.macro	disable_fiq
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index d795642..8e26360 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/platform.h>
 
 /*
  * Where in virtual memory the IO devices (timers, system controllers
@@ -36,17 +35,19 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
-#ifdef CONFIG_MMU
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-#else
-#define IO_ADDRESS(x) (x)
-#endif
-
 #define pcibios_assign_all_busses()	1
 
 #define PCIBIOS_MIN_IO		0x6000
 #define PCIBIOS_MIN_MEM 	0x00100000
 
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)	(x)
+#endif
+
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
 #endif
 
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
index e00a262..5e6ea5c 100644
--- a/arch/arm/mach-integrator/include/mach/platform.h
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -23,9 +23,6 @@
  *
  *   Integrator address map
  *
- * 	NOTE: This is a multi-hosted header file for use with uHAL and
- * 	      supported debuggers.
- *
  * ***********************************************************************/
 
 #ifndef __address_h
@@ -290,12 +287,14 @@
 #define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
 #define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
 
+#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
 
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
-#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
-#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
-#endif
+#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
+#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
+#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
+#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
+#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
+#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
 
 /* ------------------------------------------------------------------------
  *  KMI keyboard/mouse definitions
@@ -328,20 +327,6 @@
  */
 #define PHYS_PCI_V3_BASE                0x62000000
 
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
-
 /* ------------------------------------------------------------------------
  *  Integrator Interrupt Controllers
  * ------------------------------------------------------------------------
@@ -389,7 +374,7 @@
  */
 
 /* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
+ *  LED's
  * ------------------------------------------------------------------------
  *
  */
@@ -402,34 +387,18 @@
 #define LED_BANK                        INTEGRATOR_DBG_LEDS
 
 /*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      INTEGRATOR_BOOT_ROM_HI
-
-/*
  *  Timer definitions
  *
  *  Only use timer 1 & 2
  *  (both run at 24MHz and will need the clock divider set to 16).
  *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
- *  uHAL can't handle that.
- *
+ *  Timer 0 runs at bus frequency
  */
 
 #define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
 #define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
 #define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
 #define TICKS_PER_uSEC                  24
 
 /*
@@ -437,14 +406,9 @@
  *
  */
 #define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
 #define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 
 #define INTEGRATOR_CSR_BASE             0x10000000
 #define INTEGRATOR_CSR_SIZE             0x10000000
 
 #endif
-
-/* 	END */
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8138a7e..227cf4d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,9 +27,14 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
@@ -43,8 +48,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -55,7 +58,7 @@
 #define VA_IC_BASE	IO_ADDRESS(INTEGRATOR_IC_BASE) 
 #define VA_SC_BASE	IO_ADDRESS(INTEGRATOR_SC_BASE)
 #define VA_EBI_BASE	IO_ADDRESS(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET
+#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_IC)
 
 /*
  * Logical      Physical
@@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
@@ -334,14 +337,163 @@ static void __init ap_init(void)
 	}
 }
 
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static unsigned long timer_reload;
+
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+
+static cycle_t timersp_read(struct clocksource *cs)
+{
+	return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
+
+static struct clocksource clocksource_timersp = {
+	.name		= "timer2",
+	.rating		= 200,
+	.read		= timersp_read,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.shift		= 16,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void integrator_clocksource_init(u32 khz)
+{
+	struct clocksource *cs = &clocksource_timersp;
+	void __iomem *base = clksrc_base;
+	u32 ctrl = TIMER_CTRL_ENABLE;
+
+	if (khz >= 1500) {
+		khz /= 16;
+		ctrl = TIMER_CTRL_DIV16;
+	}
+
+	writel(ctrl, base + TIMER_CTRL);
+	writel(0xffff, base + TIMER_LOAD);
+
+	cs->mult = clocksource_khz2mult(khz, cs->shift);
+	clocksource_register(cs);
+}
+
+static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* clear the interrupt */
+	writel(1, clkevt_base + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+	BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		writel(ctrl, clkevt_base + TIMER_CTRL);
+		writel(timer_reload, clkevt_base + TIMER_LOAD);
+		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+	}
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+	writel(next, clkevt_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+	.name		= "timer1",
+	.shift		= 34,
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= clkevt_set_mode,
+	.set_next_event	= clkevt_set_next_event,
+	.rating		= 300,
+	.cpumask	= cpu_all_mask,
+};
+
+static struct irqaction integrator_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= integrator_timer_interrupt,
+	.dev_id		= &integrator_clockevent,
+};
+
+static void integrator_clockevent_init(u32 khz)
+{
+	struct clock_event_device *evt = &integrator_clockevent;
+	unsigned int ctrl = 0;
+
+	if (khz * 1000 > 0x100000 * HZ) {
+		khz /= 256;
+		ctrl |= TIMER_CTRL_DIV256;
+	} else if (khz * 1000 > 0x10000 * HZ) {
+		khz /= 16;
+		ctrl |= TIMER_CTRL_DIV16;
+	}
+
+	timer_reload = khz * 1000 / HZ;
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	evt->irq = IRQ_TIMERINT1;
+	evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
+	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+	clockevents_register_device(evt);
+}
+
+/*
+ * Set up timer(s).
+ */
 static void __init ap_init_timer(void)
 {
-	integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
+	u32 khz = TICKS_PER_uSEC * 1000;
+
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	integrator_clocksource_init(khz);
+	integrator_clockevent_init(khz);
 }
 
 static struct sys_timer ap_timer = {
 	.init		= ap_init_timer,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3f35293..cde57b2 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -13,7 +13,6 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
@@ -21,14 +20,17 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst.h>
 
 #include <mach/cm.h>
 #include <mach/lm.h>
@@ -39,24 +41,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
-#define INTCP_PA_MMC_BASE		0x1c000000
-#define INTCP_PA_AACI_BASE		0x1d000000
+#include <plat/timer-sp.h>
 
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40)
 #define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(INTEGRATOR_CP_SIC_BASE)
 
-#define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -71,7 +69,9 @@
  * f1600000	16000000	UART 0
  * f1700000	17000000	UART 1
  * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
+ * fc900000	c9000000	GPIO
+ * fca00000	ca000000	SIC
+ * fcb00000	cb000000	CP system control
  */
 
 static struct map_desc intcp_io_desc[] __initdata = {
@@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xca000000),
-		.pfn		= __phys_to_pfn(0xca000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xcb000000),
-		.pfn		= __phys_to_pfn(0xcb000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}
@@ -266,33 +266,43 @@ static void __init intcp_init_irq(void)
 /*
  * Clock handling
  */
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c)
+#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
 
-static const struct icst525_params cp_auxvco_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cp_auxvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min 	= 8,
 	.vd_max 	= 263,
 	.rd_min 	= 3,
 	.rd_max 	= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco)
+static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
 {
 	u32 val;
 
-	val = readl(CM_AUXOSC) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, CM_LOCK);
-	writel(val, CM_AUXOSC);
+	writel(val, clk->vcoreg);
 	writel(0, CM_LOCK);
 }
 
+static const struct clk_ops cp_auxclk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= cp_auxvco_set,
+};
+
 static struct clk cp_auxclk = {
+	.ops	= &cp_auxclk_ops,
 	.params	= &cp_auxvco_params,
-	.setvco = cp_auxvco_set,
+	.vcoreg	= CM_AUXOSC,
 };
 
 static struct clk_lookup cp_lookups[] = {
@@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = {
 
 static struct resource smc91x_resources[] = {
 	[0] = {
-		.start	= INTCP_PA_ETH_BASE,
-		.end	= INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1,
+		.start	= INTEGRATOR_CP_ETH_BASE,
+		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
-	writel(8, IO_ADDRESS(0xcb000000) + 8);
+	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
+	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
 
 	return status & 8;
 }
@@ -413,8 +423,8 @@ static struct amba_device mmc_device = {
 		.platform_data = &mmc_data,
 	},
 	.res		= {
-		.start	= INTCP_PA_MMC_BASE,
-		.end	= INTCP_PA_MMC_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_MMC_BASE,
+		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
@@ -426,8 +436,8 @@ static struct amba_device aaci_device = {
 		.init_name = "mb:1d",
 	},
 	.res		= {
-		.start	= INTCP_PA_AACI_BASE,
-		.end	= INTCP_PA_AACI_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_AACI_BASE,
+		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
@@ -558,9 +568,7 @@ static void __init intcp_init(void)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(cp_lookups); i++)
-		clkdev_add(&cp_lookups[i]);
-
+	clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
 	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
@@ -569,16 +577,22 @@ static void __init intcp_init(void)
 	}
 }
 
-#define TIMER_CTRL_IE	(1 << 5)			/* Interrupt Enable */
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
 static void __init intcp_timer_init(void)
 {
-	integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	sp804_clocksource_init(TIMER2_VA_BASE);
+	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
 }
 
 static struct sys_timer cp_timer = {
 	.init		= intcp_timer_init,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 8dcc823..28be186 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 148d25f..9cef059 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -22,7 +22,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
@@ -30,6 +29,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
@@ -390,9 +390,9 @@ static int __init pci_v3_setup_resources(struct resource **resource)
  * means I can't get additional information on the reason for the pm2fb
  * problems.  I suppose I'll just have to mind-meld with the machine. ;)
  */
-#define SC_PCI     (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20)
-#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24)
+#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
 
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 9037d2e..c9d6ba4 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ mmu enabled?
 	moveq	\rx, #0xff000000	@ physical
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5295809..48642e6 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -61,9 +61,9 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
 			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
 		break;
 	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
-		retval = __arm_ioremap(IOP13XX_PBI_LOWER_MEM_PA +
+		retval = __arm_ioremap_caller(IOP13XX_PBI_LOWER_MEM_PA +
 				       (cookie - IOP13XX_PBI_LOWER_MEM_RA),
-				       size, mtype);
+				       size, mtype, __builtin_return_address(0));
 		break;
 	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
 		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
@@ -75,7 +75,8 @@ void * __iomem __iop13xx_ioremap(unsigned long cookie, size_t size,
 		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
 		break;
 	default:
-		retval = __arm_ioremap(cookie, size, mtype);
+		retval = __arm_ioremap_caller(cookie, size, mtype,
+				__builtin_return_address(0));
 	}
 
 	return retval;
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 4873f26..6d5a908 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 93370a4..10384fc 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -19,7 +19,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 58b0166..736afe1 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xfe000000	@ physical as well as virtual
 		orr	\rx, \rx, #0x00800000	@ location of the UART
 		.endm
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
index 85ceb09..c4862d4 100644
--- a/arch/arm/mach-iop32x/include/mach/vmalloc.h
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-iop32x/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe000000
+#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index a7a08dd..d6ac85f 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 0200f80..c6a0e4e 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2a5c6376..f108a31 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -23,7 +23,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
@@ -177,7 +176,7 @@ static struct plat_serial8250_port n2100_serial_port[] = {
 		.mapbase	= N2100_UART,
 		.membase	= (char *)N2100_UART,
 		.irq		= 0,
-		.flags		= UPF_SKIP_TEST,
+		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
 		.uartclk	= 1843200,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index a60c9ef..addb2da 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ mmu enabled?
 		moveq	\rx, #0xff000000	@ physical
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
index f9f99de..48331dc 100644
--- a/arch/arm/mach-iop33x/include/mach/vmalloc.h
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-iop33x/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe000000
+#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 394e95a..c6ff552 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index a40badf..fbf55140 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index c84dfac..1a557e0 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -26,7 +26,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 904ff56..6a82768 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xc0000000	@ Physical base
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
index d195e35..61c8dae 100644
--- a/arch/arm/mach-ixp2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END	    0xfb000000
+#define VMALLOC_END	    0xfb000000UL
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 4467c42..55e5c69 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 94f68ba..237b61a 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 3045130..91fffb9 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 4a12327..0369ec4 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 60e9fd0..90771ca 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 905db31..a82e3754 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ mmu enabled?
 		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index 94a3a86..6ef65d8 100644
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -19,7 +19,7 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
 
 #define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
 #define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
index dd519f6..896c56a 100644
--- a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * specific static I/O.
  */
 
-#define VMALLOC_END	(0xec000000)
+#define VMALLOC_END	(0xec000000UL)
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 59022be..4b0e598 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 6e558a7..d8bc86d 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index c4a0159..e318153 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -502,32 +502,6 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
-/*
- * We override these so we properly do dmabounce otherwise drivers
- * are able to set the dma_mask to 0xffffffff and we can no longer
- * trap bounces. :(
- *
- * We just return true on everyhing except for < 64MB in which case 
- * we will fail miseralby and die since we can't handle that case.
- */
-int
-pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-    
-int
-pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1 )
-		return 0;
-
-	return -EIO;
-}
-
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3bbf40f..0bce097 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -21,7 +21,6 @@
 #include <linux/tty.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/time.h>
@@ -427,6 +426,17 @@ static void __init ixp4xx_clocksource_init(void)
 }
 
 /*
+ * sched_clock()
+ */
+unsigned long long sched_clock(void)
+{
+	cycle_t cyc = ixp4xx_get_cycles(NULL);
+	struct clocksource *cs = &clocksource_ixp4xx;
+
+	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
  * clockevents
  */
 static int ixp4xx_set_next_event(unsigned long evt,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 25bf5ad..31a47f6 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 59b73a0..2583b2a 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 0bc7185..c67586b 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,7 +27,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 7c6a691..893873e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart,rx
+                .macro  addruart, rx, tmp
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f9d1c43..f91ca6d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,11 +26,6 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
index 7b3580b..9bcd64d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -1,5 +1,5 @@
 /*
  * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (0xFF000000)
+#define VMALLOC_END       (0xff000000UL)
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index bbb7689..827cbc4 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index e8bb257..a17ed79 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <mach/npe.h>
 
 #define DEBUG_MSG			0
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 7ea7820..4dd7486 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -18,7 +18,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196..29b2163 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,18 @@ config MACH_SHEEVAPLUG
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+	bool "Marvell eSATA SheevaPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell eSATA SheevaPlug Reference Board.
+
+config MACH_GURUPLUG
+	bool "Marvell GuruPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell GuruPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
@@ -46,18 +58,47 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_OPENRD
+        bool
+
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
+	select MACH_OPENRD
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Base Board.
 
+config MACH_OPENRD_CLIENT
+	bool "Marvell OpenRD Client Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Client Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space v2 NAS.
 
+config MACH_INETSPACE_V2
+	bool "LaCie Internet Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Internet Space v2 NAS.
+
+config MACH_NET2BIG_V2
+	bool "LaCie 2Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network v2 NAS.
+
+config MACH_NET5BIG_V2
+	bool "LaCie 5Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 5Big Network v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53..c0cd5d3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,14 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd07..6072eaa 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -305,6 +305,15 @@ void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
 	platform_device_register(&kirkwood_nand_flash);
 }
 
+void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+				   int (*dev_ready)(struct mtd_info *))
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.dev_ready = dev_ready;
+	platform_device_register(&kirkwood_nand_flash);
+}
 
 /*****************************************************************************
  * SoC RTC
@@ -656,7 +665,7 @@ static struct platform_device kirkwood_xor00_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor00_data,
+		.platform_data		= &kirkwood_xor00_data,
 	},
 };
 
@@ -682,7 +691,7 @@ static struct platform_device kirkwood_xor01_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor01_data,
+		.platform_data		= &kirkwood_xor01_data,
 	},
 };
 
@@ -755,7 +764,7 @@ static struct platform_device kirkwood_xor10_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor10_data,
+		.platform_data		= &kirkwood_xor10_data,
 	},
 };
 
@@ -781,7 +790,7 @@ static struct platform_device kirkwood_xor11_channel = {
 	.dev		= {
 		.dma_mask		= &kirkwood_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&kirkwood_xor11_data,
+		.platform_data		= &kirkwood_xor11_data,
 	},
 };
 
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index d7de434..05e8a8a 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -16,6 +16,7 @@ struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
+struct mtd_info;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -41,6 +42,7 @@ void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
new file mode 100644
index 0000000..54d07c8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -0,0 +1,131 @@
+/*
+ * arch/arm/mach-kirkwood/guruplug-setup.c
+ *
+ * Marvell GuruPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition guruplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data guruplug_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct mvsdio_platform_data guruplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led guruplug_led_pins[] = {
+	{
+		.name			= "guruplug:red:health",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:health",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:red:wmode",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:wmode",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data guruplug_led_data = {
+	.leds		= guruplug_led_pins,
+	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
+};
+
+static struct platform_device guruplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &guruplug_led_data,
+	}
+};
+
+static unsigned int guruplug_mpp_config[] __initdata = {
+	MPP46_GPIO,	/* M_RLED */
+	MPP47_GPIO,	/* M_GLED */
+	MPP48_GPIO,	/* B_RLED */
+	MPP49_GPIO,	/* B_GLED */
+	0
+};
+
+static void __init guruplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(guruplug_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&guruplug_ge00_data);
+	kirkwood_ge01_init(&guruplug_ge01_data);
+	kirkwood_sata_init(&guruplug_sata_data);
+	kirkwood_sdio_init(&guruplug_mvsdio_data);
+
+	platform_device_register(&guruplug_leds);
+}
+
+MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
+	/* Maintainer: Siddarth Gore <gores@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= guruplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c1..d060677 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
index 8f48260..bf162ca 100644
--- a/arch/arm/mach-kirkwood/include/mach/vmalloc.h
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-kirkwood/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe800000
+#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 0358f45..5e6f711 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
 		.desc		= "SWR Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_F1,
+		.code		= KEY_WPS_BUTTON,
 		.gpio		= 46,
-		.desc		= "WPS Button(F1)",
+		.desc		= "WPS Button",
 		.active_low	= 1,
 	},
 };
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a06406..3ae158d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = {
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+		.name			= "ns_v2:blue:sata",
+		.default_trigger	= "default-on",
+		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.active_low		= 1,
+	},
+	{
+		.name			= "ns_v2:red:fail",
+		.gpio			= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = {
 
 static void __init netspace_v2_gpio_leds_init(void)
 {
-	platform_device_register(&netspace_v2_gpio_leds);
+	int err;
 
-	/*
-	 * Configure the front blue LED to blink in relation with the SATA
-	 * activity.
-	 */
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-			 "SATA blue LED slow") != 0)
-		return;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
-		goto err_free_1;
-	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
-			 "SATA blue LED command") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
-		goto err_free_2;
-
-	return;
-
-err_free_2:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
-	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	pr_err("netspace_v2: failed to configure SATA blue LED\n");
+	/* Configure register slow_led to allow SATA activity LED blinking */
+	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+	if (err == 0) {
+		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+		if (err)
+			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+	}
+	if (err)
+		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
+	platform_device_register(&netspace_v2_gpio_leds);
 }
 
 /*****************************************************************************
@@ -314,6 +309,7 @@ static void __init netspace_v2_init(void)
 		pr_err("netspace_v2: failed to configure power-off GPIO\n");
 }
 
+#ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
 	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &netspace_v2_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
new file mode 100644
index 0000000..8a2bb02
--- /dev/null
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -0,0 +1,415 @@
+/*
+ * arch/arm/mach-kirkwood/netxbig_v2-setup.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition netxbig_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data netxbig_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= netxbig_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(netxbig_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &netxbig_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netxbig_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+static void __init netxbig_v2_sata_power_init(void)
+{
+	int i;
+	int err;
+	int hdd_nb;
+
+	if (machine_is_net2big_v2())
+		hdd_nb = 2;
+	else
+		hdd_nb = 5;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_nb; i++) {
+		err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					netxbig_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(netxbig_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETXBIG_V2_GPIO_SWITCH_POWER_ON		13
+#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF	15
+#define NETXBIG_V2_GPIO_FUNC_BUTTON		34
+
+#define NETXBIG_V2_SWITCH_POWER_ON		0x1
+#define NETXBIG_V2_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button netxbig_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_ON,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 1,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_OFF,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 1,
+	},
+	[2] = {
+		.code		= KEY_OPTION,
+		.gpio		= NETXBIG_V2_GPIO_FUNC_BUTTON,
+		.desc		= "Function button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data netxbig_v2_button_data = {
+	.buttons	= netxbig_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netxbig_v2_buttons),
+};
+
+static struct platform_device netxbig_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netxbig_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register    : bit [0-2] -> GPIO [44-46]
+ * - enable register  : GPIO 29
+ *
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ *   0  | front LED
+ *   1  | front LED brightness
+ *   2  | HDD LED brightness
+ *   3  | HDD1 LED
+ *   4  | HDD2 LED
+ *   5  | HDD3 LED
+ *   6  | HDD4 LED
+ *   7  | HDD5 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ *   0  | min (off)
+ *   -  | -
+ *   7  | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ *   0  | fix off
+ *   1  | fix blue on
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | HDD LED mode
+ * -------------------------------------------------
+ *   0  | fix blue on
+ *   1  | SATA activity blink
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ */
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void netxbig_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer netxbig_v2_timer = {
+	.init = netxbig_v2_timer_init,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int net2big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP40_GPIO,		/* eSATA presence */
+	MPP44_GPIO,		/* CPLD extension (data 0) */
+	MPP45_GPIO,		/* CPLD extension (data 1) */
+	MPP46_GPIO,		/* CPLD extension (data 2) */
+	MPP47_GPIO,		/* CPLD extension (addr 0) */
+	MPP48_GPIO,		/* CPLD extension (addr 1) */
+	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	0
+};
+
+static unsigned int net5big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP38_GPIO,		/* SATA HDD3 presence */
+	MPP39_GPIO,		/* SATA HDD4 presence */
+	MPP40_GPIO,		/* SATA HDD5 presence */
+	MPP41_GPIO,		/* SATA HDD3 power */
+	MPP42_GPIO,		/* SATA HDD4 power */
+	MPP43_GPIO,		/* SATA HDD5 power */
+	MPP44_GPIO,		/* CPLD extension (data 0) */
+	MPP45_GPIO,		/* CPLD extension (data 1) */
+	MPP46_GPIO,		/* CPLD extension (data 2) */
+	MPP47_GPIO,		/* CPLD extension (addr 0) */
+	MPP48_GPIO,		/* CPLD extension (addr 1) */
+	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	0
+};
+
+#define NETXBIG_V2_GPIO_POWER_OFF		7
+
+static void netxbig_v2_power_off(void)
+{
+	gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netxbig_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	if (machine_is_net2big_v2())
+		kirkwood_mpp_conf(net2big_v2_mpp_config);
+	else
+		kirkwood_mpp_conf(net5big_v2_mpp_config);
+
+	netxbig_v2_sata_power_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netxbig_v2_ge00_data);
+	if (machine_is_net5big_v2())
+		kirkwood_ge01_init(&netxbig_v2_ge01_data);
+	kirkwood_sata_init(&netxbig_v2_sata_data);
+	kirkwood_uart0_init();
+	spi_register_board_info(netxbig_v2_spi_slave_info,
+				ARRAY_SIZE(netxbig_v2_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, netxbig_v2_i2c_info,
+				ARRAY_SIZE(netxbig_v2_i2c_info));
+
+	platform_device_register(&netxbig_v2_gpio_buttons);
+
+	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netxbig_v2_power_off;
+	else
+		pr_err("netxbig_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NET2BIG_V2
+MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netxbig_v2_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NET5BIG_V2
+MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netxbig_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 0000000..ad3f1ec
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE
+	}, {
+		.name		= "uImage",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M
+	}, {
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_ge00_data);
+	if (machine_is_openrd_client())
+		kirkwood_ge01_init(&openrd_ge01_data);
+	kirkwood_sata_init(&openrd_sata_data);
+	kirkwood_sdio_init(&openrd_mvsdio_data);
+
+	kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+	if (machine_is_openrd_base() || machine_is_openrd_client())
+		kirkwood_pcie_init();
+
+	return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c7..0000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
-	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
-	MPP29_GPIO,
-	0
-};
-
-static void __init openrd_base_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(openrd_base_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&openrd_base_ge00_data);
-	kirkwood_sata_init(&openrd_base_sata_data);
-	kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
-	kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
-	if (machine_is_openrd_base())
-		kirkwood_pcie_init();
-
-	return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x00000100,
-	.init_machine	= openrd_base_init,
-	.map_io		= kirkwood_map_io,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index a604b2a..dee1eff 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mbus.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319ee..a00879d 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
 };
 
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
 };
 
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
+	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
+};
+
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
 		.name			= "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
 	0
 };
 
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP44_GPIO,	/* SD Write Protect */
+	MPP47_GPIO,	/* SD Card Detect */
+	MPP49_GPIO,	/* LED Green */
+	0
+};
+
 static void __init sheevaplug_init(void)
 {
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
 	kirkwood_init();
-	kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+	/* setup gpio pin select */
+	if (machine_is_sheeva_esata())
+		kirkwood_mpp_conf(sheeva_esata_mpp_config);
+	else
+		kirkwood_mpp_conf(sheevaplug_mpp_config);
 
 	kirkwood_uart0_init();
 	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);
-	kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+	/* honor lower power consumption for plugs with out eSATA */
+	if (machine_is_sheeva_esata())
+		kirkwood_sata_init(&sheeva_esata_sata_data);
+
+	/* enable sd wp and sd cd on plugs with esata */
+	if (machine_is_sheeva_esata())
+		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+	else
+		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
 	platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	.init_irq	= kirkwood_init_irq,
 	.timer		= &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= sheevaplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 7221c20..f781164 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -77,7 +77,7 @@ struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	},
 };
 
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
index 9a59296..7fa0373 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.h
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index 3782c35..cf2095d 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =KS8695_UART_PA		@ physical base address
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 34eed2a..b69ed34 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #io_phys		@ physical base address
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index c472b9e..7fe4fd3 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/sysdev.h>
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 85141ed..c0dcbbb 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1                 @ MMU enabled?
 		mov     \rx, #0x00000700        @ offset from base
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
index 3fbd494..d62da73 100644
--- a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  *  version 2 as published by the Free Software Foundation.
  *
  */
-#define VMALLOC_END       (0xe8000000)
+#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index a8c20bd..3136c91 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =LOKI_REGS_PHYS_BASE
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
index 8dc3bfc..5dcbd86 100644
--- a/arch/arm/mach-loki/include/mach/vmalloc.h
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-loki/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe800000
+#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index c6a564f..6ab843e 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MMP
 
-menu "Marvell PXA168/910 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implmentations"
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
@@ -16,6 +16,13 @@ config MACH_ZYLONITE2
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Zylonite2 Development Board.
 
+config MACH_AVENGERS_LITE
+	bool "Marvell's PXA168 Avengers Lite Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Avengers Lite Development Board.
+
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
 	select CPU_PXA910
@@ -30,6 +37,26 @@ config MACH_TTC_DKB
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TTC_DKB Development Board.
 
+config MACH_FLINT
+	bool "Marvell's Flint Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Flint Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
+config MACH_MARVELL_JASPER
+	bool "Marvell's Jasper Development Platform"
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-base
+	  Jasper Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv6 architecture.
+
 endmenu
 
 config CPU_PXA168
@@ -44,4 +71,10 @@ config CPU_PXA910
 	help
 	  Select code specific to PXA910
 
+config CPU_MMP2
+	bool
+	select CPU_V6
+	select CPU_32v6K
+	help
+	  Select code specific to MMP2. MMP2 is ARMv6 compatible.
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 6883e65..8b66d06 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,14 +2,18 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o irq.o time.o
+obj-y				+= common.o clock.o devices.o time.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
+obj-$(CONFIG_MACH_FLINT)	+= flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index a2d307e..244655d 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -59,6 +59,13 @@ static unsigned long common_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO107_UART1_RXD,
 	GPIO108_UART1_TXD,
+
+	/* SSP1 */
+	GPIO113_I2S_MCLK,
+	GPIO114_I2S_FRM,
+	GPIO115_I2S_BCLK,
+	GPIO116_I2S_RXD,
+	GPIO117_I2S_TXD,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -123,12 +130,18 @@ static struct pxa3xx_nand_platform_data aspenite_nand_info = {
 	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
+static struct i2c_board_info aspenite_i2c_info[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1b), },
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
+	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 0000000..8c3fa5d1
--- /dev/null
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -0,0 +1,51 @@
+/*
+ *  linux/arch/arm/mach-mmp/avengers_lite.c
+ *
+ *  Support for the Marvell PXA168-based Avengers lite Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/irqs.h>
+
+
+#include "common.h"
+#include <linux/delay.h>
+
+/* Avengers lite MFP configurations */
+static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
+	/* DEBUG_UART */
+	GPIO88_UART2_TXD,
+	GPIO89_UART2_RXD,
+};
+
+static void __init avengers_lite_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
+
+	/* on-chip devices */
+	pxa168_add_uart(2);
+}
+
+MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = avengers_lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2a46ed5..886e056 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -88,11 +88,3 @@ unsigned long clk_get_rate(struct clk *clk)
 	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
-	int i;
-
-	for (i = 0; i < num; i++)
-		clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index eefffbe..016ae94 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -68,5 +68,3 @@ struct clk clk_##_name = {					\
 
 extern struct clk clk_pxa168_gpio;
 extern struct clk clk_pxa168_timers;
-
-extern void clks_register(struct clk_lookup *, size_t);
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index c33fbbc..b4a0ba0 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,11 +3,15 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
 
 extern struct sys_timer pxa168_timer;
 extern struct sys_timer pxa910_timer;
+extern struct sys_timer mmp2_timer;
 extern void __init pxa168_init_irq(void);
 extern void __init pxa910_init_irq(void);
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
new file mode 100644
index 0000000..4ec7709
--- /dev/null
+++ b/arch/arm/mach-mmp/flint.c
@@ -0,0 +1,123 @@
+/*
+ *  linux/arch/arm/mach-mmp/flint.c
+ *
+ *  Support for the Marvell Flint Development Platform.
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long flint_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO45_UART1_RXD,
+	GPIO46_UART1_TXD,
+
+	/* UART2 */
+	GPIO47_UART2_RXD,
+	GPIO48_UART2_TXD,
+
+	/* SMC */
+	GPIO151_SMC_SCLK,
+	GPIO145_SMC_nCS0,
+	GPIO146_SMC_nCS1,
+	GPIO152_SMC_BE0,
+	GPIO153_SMC_BE1,
+	GPIO154_SMC_IRQ,
+	GPIO113_SMC_RDY,
+
+	/*Ethernet*/
+	GPIO155_GPIO155,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+};
+
+static struct smc91x_platdata flint_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start  = SMC_CS1_PHYS_BASE + 0x300,
+		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(155),
+		.end    = gpio_to_irq(155),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &flint_smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+};
+
+static void __init flint_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(2);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(FLINT, "Flint Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = flint_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 25e797b..83b1872 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -8,6 +8,7 @@
  *
  * PXA168    A0    0x41159263   0x56158400   0x00A0A333
  * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
+ * MMP2	     Z0			0x560f5811
  */
 
 #ifdef CONFIG_CPU_PXA168
@@ -24,7 +25,15 @@
 #  define __cpu_is_pxa910(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_MMP2
+#  define __cpu_is_mmp2(id)	\
+	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+#else
+#  define __cpu_is_mmp2(id)	(0)
+#endif
+
 #define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
 #define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
+#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
 
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index a850f87..76deff2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =APB_PHYS_BASE		@ physical
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 2458539..1fa0a49 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -34,4 +34,16 @@ struct pxa_device_desc pxa910_device_##_name __initdata = {		\
 	.size		= _size,					\
 	.dma		= { _dma },					\
 };
+
+#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
+struct pxa_device_desc mmp2_device_##_name __initdata = {		\
+	.dev_name	= "mmp2-" #_name,				\
+	.drv_name	= _drv,						\
+	.id		= _id,						\
+	.irq		= IRQ_MMP2_##_irq,				\
+	.start		= _start,					\
+	.size		= _size,					\
+	.dma		= { _dma },					\
+}
+
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 6d3cd35..c42d9d4 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -15,7 +15,12 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =ICU_AP_IRQ_SEL_INT_NUM
+	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+	and	\tmp, \tmp, #0xff00
+	cmp	\tmp, #0x5800
+	ldr	\base, =ICU_VIRT_BASE
+	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
+	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index ab26d13..ee8b02e 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -10,7 +10,7 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
 
-#define NR_BUILTIN_GPIO	(128)
+#define NR_BUILTIN_GPIO	(192)
 
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d68871b..b379cde 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -5,10 +5,10 @@
  * Interrupt numbers for PXA168
  */
 #define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP3			0
-#define IRQ_PXA168_SSP2			1
-#define IRQ_PXA168_SSP1			2
-#define IRQ_PXA168_SSP0			3
+#define IRQ_PXA168_SSP4			0
+#define IRQ_PXA168_SSP3			1
+#define IRQ_PXA168_SSP2			2
+#define IRQ_PXA168_SSP1			3
 #define IRQ_PXA168_PMIC_INT		4
 #define IRQ_PXA168_RTC_INT		5
 #define IRQ_PXA168_RTC_ALARM		6
@@ -20,7 +20,7 @@
 #define IRQ_PXA168_TIMER2		14
 #define IRQ_PXA168_TIMER3		15
 #define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP4			17
+#define IRQ_PXA168_SSP5			17
 #define IRQ_PXA168_MSP_WAKEUP		19
 #define IRQ_PXA168_CF_WAKEUP		20
 #define IRQ_PXA168_XD_WAKEUP		21
@@ -113,10 +113,119 @@
 #define IRQ_PXA910_AP_PMU		60
 #define IRQ_PXA910_SM_INT		63	/* from PinMux */
 
-#define IRQ_GPIO_START			64
-#define IRQ_GPIO_NUM			128
+/*
+ * Interrupt numbers for MMP2
+ */
+#define IRQ_MMP2_NONE			(-1)
+#define IRQ_MMP2_SSP1			0
+#define IRQ_MMP2_SSP2			1
+#define IRQ_MMP2_SSPA1			2
+#define IRQ_MMP2_SSPA2			3
+#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
+#define IRQ_MMP2_RTC_MUX		5
+#define IRQ_MMP2_TWSI1			7
+#define IRQ_MMP2_GPU			8
+#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_ROTARY			10
+#define IRQ_MMP2_TRACKBALL		11
+#define IRQ_MMP2_ONEWIRE		12
+#define IRQ_MMP2_TIMER1			13
+#define IRQ_MMP2_TIMER2			14
+#define IRQ_MMP2_TIMER3			15
+#define IRQ_MMP2_RIPC			16
+#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
+#define IRQ_MMP2_HDMI			19
+#define IRQ_MMP2_SSP3			20
+#define IRQ_MMP2_SSP4			21
+#define IRQ_MMP2_USB_HS1		22
+#define IRQ_MMP2_USB_HS2		23
+#define IRQ_MMP2_UART3			24
+#define IRQ_MMP2_UART1			27
+#define IRQ_MMP2_UART2			28
+#define IRQ_MMP2_MIPI_DSI		29
+#define IRQ_MMP2_CI2			30
+#define IRQ_MMP2_PMU_TIMER1		31
+#define IRQ_MMP2_PMU_TIMER2		32
+#define IRQ_MMP2_PMU_TIMER3		33
+#define IRQ_MMP2_USB_FS			34
+#define IRQ_MMP2_MISC_MUX		35
+#define IRQ_MMP2_WDT1			36
+#define IRQ_MMP2_NAND_DMA		37
+#define IRQ_MMP2_USIM			38
+#define IRQ_MMP2_MMC			39
+#define IRQ_MMP2_WTM			40
+#define IRQ_MMP2_LCD			41
+#define IRQ_MMP2_CI			42
+#define IRQ_MMP2_IRE			43
+#define IRQ_MMP2_USB_OTG		44
+#define IRQ_MMP2_NAND			45
+#define IRQ_MMP2_UART4			46
+#define IRQ_MMP2_DMA_FIQ		47
+#define IRQ_MMP2_DMA_RIQ		48
+#define IRQ_MMP2_GPIO			49
+#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MMC2			52
+#define IRQ_MMP2_MMC3			53
+#define IRQ_MMP2_MMC4			54
+#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MSP			58
+#define IRQ_MMP2_MIPI_SLIM_DMA		59
+#define IRQ_MMP2_PJ4_FREQ_CHG		60
+#define IRQ_MMP2_MIPI_SLIM		62
+#define IRQ_MMP2_SM			63
+
+#define IRQ_MMP2_MUX_BASE		64
+
+/* secondary interrupt of INT #4 */
+#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
+#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
+#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
+
+/* secondary interrupt of INT #5 */
+#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
+#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
+#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
+
+/* secondary interrupt of INT #17 */
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
+#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
+#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
+#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
+#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
+
+/* secondary interrupt of INT #35 */
+#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
+#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
+#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
+#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
+#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
+#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
+#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
+#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
+#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
+#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
+#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
+#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
+#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
+#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
+#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
+
+/* secondary interrupt of INT #51 */
+#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
+#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+
+#define IRQ_GPIO_START			128
+#define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-#define NR_IRQS		(IRQ_GPIO_START + IRQ_GPIO_NUM)
+/* Board IRQ - 64 by default, increase if not enough */
+#define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
+
+#define NR_IRQS				(IRQ_BOARD_END)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
new file mode 100644
index 0000000..761c2da
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -0,0 +1,395 @@
+#ifndef __ASM_MACH_MFP_MMP2_H
+#define __ASM_MACH_MFP_MMP2_H
+
+#include <mach/mfp.h>
+
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
+/* GPIO */
+#define GPIO0_GPIO0		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO1		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO2		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO3		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO4		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO5		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO6		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO7		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO8		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO9		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO10		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO11		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO12		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO13		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO14		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO15		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO16		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO17		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO18		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO19		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO20		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO24		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO25		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO26		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO27		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO28		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO29		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO30		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO31		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO32		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO33		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO34		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO35		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO36		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO37		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO38		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO39		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO40		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO41		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO42		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO43		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO44		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO47		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO48		MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO49		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO50		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO51		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO52		MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO53		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO54		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO59		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO60		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO61		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO62		MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO63		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO64		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO65		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO66		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO67		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO68		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO69		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO70		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO71		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO72		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO73		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO74		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO75		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO76		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO77		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO78		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO79		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO80		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO81		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO82		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO83		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO84		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO85		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO86		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO87		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO88		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO89		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO90		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO91		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO92		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO93		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO94		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO95		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO96		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO97		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO98		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO99		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO100		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO102		MFP_CFG(GPIO102, AF1)
+#define GPIO103_GPIO103		MFP_CFG(GPIO103, AF1)
+#define GPIO104_GPIO104		MFP_CFG(GPIO104, AF1)
+#define GPIO105_GPIO105		MFP_CFG(GPIO105, AF1)
+#define GPIO106_GPIO106		MFP_CFG(GPIO106, AF1)
+#define GPIO107_GPIO107		MFP_CFG(GPIO107, AF1)
+#define GPIO108_GPIO108		MFP_CFG(GPIO108, AF1)
+#define GPIO109_GPIO109		MFP_CFG(GPIO109, AF1)
+#define GPIO110_GPIO110		MFP_CFG(GPIO110, AF1)
+#define GPIO111_GPIO111		MFP_CFG(GPIO111, AF1)
+#define GPIO112_GPIO112		MFP_CFG(GPIO112, AF1)
+#define GPIO113_GPIO113		MFP_CFG(GPIO113, AF1)
+#define GPIO114_GPIO114		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO115		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO116		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO117		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO118		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO119		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO120		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO121		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO122		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO123		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO124		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO125		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO126		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO127		MFP_CFG(GPIO127, AF0)
+#define GPIO128_GPIO128		MFP_CFG(GPIO128, AF0)
+#define GPIO129_GPIO129		MFP_CFG(GPIO129, AF0)
+#define GPIO130_GPIO130		MFP_CFG(GPIO130, AF0)
+#define GPIO131_GPIO131		MFP_CFG(GPIO131, AF0)
+#define GPIO132_GPIO132		MFP_CFG(GPIO132, AF0)
+#define GPIO133_GPIO133		MFP_CFG(GPIO133, AF0)
+#define GPIO134_GPIO134		MFP_CFG(GPIO134, AF0)
+#define GPIO135_GPIO135		MFP_CFG(GPIO135, AF0)
+#define GPIO136_GPIO136		MFP_CFG(GPIO136, AF0)
+#define GPIO137_GPIO137		MFP_CFG(GPIO137, AF0)
+#define GPIO138_GPIO138		MFP_CFG(GPIO138, AF0)
+#define GPIO139_GPIO139		MFP_CFG(GPIO139, AF0)
+#define GPIO140_GPIO140		MFP_CFG(GPIO140, AF0)
+#define GPIO141_GPIO141		MFP_CFG(GPIO141, AF0)
+#define GPIO142_GPIO142		MFP_CFG(GPIO142, AF1)
+#define GPIO143_GPIO143		MFP_CFG(GPIO143, AF1)
+#define GPIO144_GPIO144		MFP_CFG(GPIO144, AF1)
+#define GPIO145_GPIO145		MFP_CFG(GPIO145, AF1)
+#define GPIO146_GPIO146		MFP_CFG(GPIO146, AF1)
+#define GPIO147_GPIO147		MFP_CFG(GPIO147, AF1)
+#define GPIO148_GPIO148		MFP_CFG(GPIO148, AF1)
+#define GPIO149_GPIO149		MFP_CFG(GPIO149, AF1)
+#define GPIO150_GPIO150		MFP_CFG(GPIO150, AF1)
+#define GPIO151_GPIO151		MFP_CFG(GPIO151, AF1)
+#define GPIO152_GPIO152		MFP_CFG(GPIO152, AF1)
+#define GPIO153_GPIO153		MFP_CFG(GPIO153, AF1)
+#define GPIO154_GPIO154		MFP_CFG(GPIO154, AF1)
+#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
+#define GPIO156_GPIO156		MFP_CFG(GPIO156, AF1)
+#define GPIO157_GPIO157		MFP_CFG(GPIO157, AF1)
+#define GPIO158_GPIO158		MFP_CFG(GPIO158, AF1)
+#define GPIO159_GPIO159		MFP_CFG(GPIO159, AF1)
+#define GPIO160_GPIO160		MFP_CFG(GPIO160, AF1)
+#define GPIO161_GPIO161		MFP_CFG(GPIO161, AF1)
+#define GPIO162_GPIO162		MFP_CFG(GPIO162, AF1)
+#define GPIO163_GPIO163		MFP_CFG(GPIO163, AF1)
+#define GPIO164_GPIO164		MFP_CFG(GPIO164, AF1)
+#define GPIO165_GPIO165		MFP_CFG(GPIO165, AF1)
+#define GPIO166_GPIO166		MFP_CFG(GPIO166, AF1)
+#define GPIO167_GPIO167		MFP_CFG(GPIO167, AF1)
+#define GPIO168_GPIO168		MFP_CFG(GPIO168, AF1)
+
+/* DFI */
+#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
+#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
+#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
+#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
+#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
+#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
+#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
+#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
+#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
+#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
+#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
+#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
+#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
+#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
+#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
+#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
+#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
+#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
+#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
+#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
+#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
+#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
+#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
+#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
+
+/* Static Memory Controller */
+#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
+#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
+#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
+#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
+#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
+#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
+#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
+
+/* Ethernet */
+#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
+
+/* UART1 */
+#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
+#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
+#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
+#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
+#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
+#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
+
+/* UART2 */
+#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
+
+/* UART3 */
+#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
+
+/* MMC1 */
+#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
+#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
+#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
+#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
+#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
+#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
+#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
+#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
+#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
+#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
+#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
+#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
+
+/*MMC2*/
+#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
+#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
+#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
+#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
+#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
+#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
+
+/*MMC3*/
+#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
+#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
+#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
+#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
+#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
+#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
+#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
+#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
+#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
+#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
+
+/* LCD */
+#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
+#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
+#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
+#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
+#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
+#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
+#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
+#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
+#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
+#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
+#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
+#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
+#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
+#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
+#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
+#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
+#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
+#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
+#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
+#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
+#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
+#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
+#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
+#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
+#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
+#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
+#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
+#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
+#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
+#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
+#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
+#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
+#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
+
+#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
+
+/*LCD TV path*/
+#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
+#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
+#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
+#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
+#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
+#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
+#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
+#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
+#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
+#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
+#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
+
+/* I2C */
+#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
+#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
+#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
+#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
+#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
+#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
+#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
+#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
+#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
+
+/* SSPA1 */
+#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
+#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
+#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
+#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
+
+/* SSPA2 */
+#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
+#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
+#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
+#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
+
+/* Keypad */
+#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
+#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
+#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
+#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
+#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
+
+/* CAMERA */
+#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
+#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
+#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
+#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
+#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
+#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
+#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
+#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
+#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
+#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
+#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
+#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
+
+/* PMIC */
+#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
+
+#endif /* __ASM_MACH_MFP_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 3b216bf..ded43c4 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -193,7 +193,9 @@
 #define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
 #define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
 
-/* UART1 */
+/* UART */
+#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
 #define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
 #define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
new file mode 100644
index 0000000..fec220b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_MACH_MMP2_H
+#define __ASM_MACH_MMP2_H
+
+#include <linux/i2c.h>
+#include <mach/devices.h>
+#include <plat/i2c.h>
+
+extern struct pxa_device_desc mmp2_device_uart1;
+extern struct pxa_device_desc mmp2_device_uart2;
+extern struct pxa_device_desc mmp2_device_uart3;
+extern struct pxa_device_desc mmp2_device_uart4;
+extern struct pxa_device_desc mmp2_device_twsi1;
+extern struct pxa_device_desc mmp2_device_twsi2;
+extern struct pxa_device_desc mmp2_device_twsi3;
+extern struct pxa_device_desc mmp2_device_twsi4;
+extern struct pxa_device_desc mmp2_device_twsi5;
+extern struct pxa_device_desc mmp2_device_twsi6;
+
+static inline int mmp2_add_uart(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &mmp2_device_uart1; break;
+	case 2: d = &mmp2_device_uart2; break;
+	case 3: d = &mmp2_device_uart3; break;
+	case 4: d = &mmp2_device_uart4; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, NULL, 0);
+}
+
+static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
+				  struct i2c_board_info *info, unsigned size)
+{
+	struct pxa_device_desc *d = NULL;
+	int ret;
+
+	switch (id) {
+	case 1: d = &mmp2_device_twsi1; break;
+	case 2: d = &mmp2_device_twsi2; break;
+	case 3: d = &mmp2_device_twsi3; break;
+	case 4: d = &mmp2_device_twsi4; break;
+	case 5: d = &mmp2_device_twsi5; break;
+	case 6: d = &mmp2_device_twsi6; break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_register_board_info(id - 1, info, size);
+	if (ret)
+		return ret;
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
+#endif /* __ASM_MACH_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 3ad612c..3b2bd5d 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -14,6 +14,11 @@ extern struct pxa_device_desc pxa168_device_pwm1;
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_ssp1;
+extern struct pxa_device_desc pxa168_device_ssp2;
+extern struct pxa_device_desc pxa168_device_ssp3;
+extern struct pxa_device_desc pxa168_device_ssp4;
+extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
@@ -67,6 +72,22 @@ static inline int pxa168_add_pwm(int id)
 	return pxa_register_device(d, NULL, 0);
 }
 
+static inline int pxa168_add_ssp(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_ssp1; break;
+	case 2: d = &pxa168_device_ssp2; break;
+	case 3: d = &pxa168_device_ssp3; break;
+	case 4: d = &pxa168_device_ssp4; break;
+	case 5: d = &pxa168_device_ssp5; break;
+	default:
+		return -EINVAL;
+	}
+	return pxa_register_device(d, NULL, 0);
+}
+
 static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 98ccbee..1a96585 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -26,8 +26,6 @@
 #define APBC_PXA168_PWM2	APBC_REG(0x010)
 #define APBC_PXA168_PWM3	APBC_REG(0x014)
 #define APBC_PXA168_PWM4	APBC_REG(0x018)
-#define APBC_PXA168_SSP1	APBC_REG(0x01c)
-#define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
 #define APBC_PXA168_TWSI0	APBC_REG(0x02c)
 #define APBC_PXA168_KPC		APBC_REG(0x030)
@@ -35,14 +33,16 @@
 #define APBC_PXA168_AIB		APBC_REG(0x03c)
 #define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
 #define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA168_SSP3	APBC_REG(0x04c)
 #define APBC_PXA168_ASFAR	APBC_REG(0x050)
 #define APBC_PXA168_ASSAR	APBC_REG(0x054)
-#define APBC_PXA168_SSP4	APBC_REG(0x058)
-#define APBC_PXA168_SSP5	APBC_REG(0x05c)
 #define APBC_PXA168_TWSI1	APBC_REG(0x06c)
 #define APBC_PXA168_UART3	APBC_REG(0x070)
 #define APBC_PXA168_AC97	APBC_REG(0x084)
+#define APBC_PXA168_SSP1	APBC_REG(0x81c)
+#define APBC_PXA168_SSP2	APBC_REG(0x820)
+#define APBC_PXA168_SSP3	APBC_REG(0x84c)
+#define APBC_PXA168_SSP4	APBC_REG(0x858)
+#define APBC_PXA168_SSP5	APBC_REG(0x85c)
 
 /*
  * APB Clock register offsets for PXA910
@@ -69,6 +69,47 @@
 #define APBC_PXA910_ASFAR	APBC_REG(0x050)
 #define APBC_PXA910_ASSAR	APBC_REG(0x054)
 
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_MMP2_RTC		APBC_REG(0x000)
+#define APBC_MMP2_TWSI1		APBC_REG(0x004)
+#define APBC_MMP2_TWSI2		APBC_REG(0x008)
+#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
+#define APBC_MMP2_TWSI4		APBC_REG(0x010)
+#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
+#define APBC_MMP2_KPC		APBC_REG(0x018)
+#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
+#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
+#define APBC_MMP2_TIMERS	APBC_REG(0x024)
+#define APBC_MMP2_UART1		APBC_REG(0x02c)
+#define APBC_MMP2_UART2		APBC_REG(0x030)
+#define APBC_MMP2_UART3		APBC_REG(0x034)
+#define APBC_MMP2_GPIO		APBC_REG(0x038)
+#define APBC_MMP2_PWM0		APBC_REG(0x03c)
+#define APBC_MMP2_PWM1		APBC_REG(0x040)
+#define APBC_MMP2_PWM2		APBC_REG(0x044)
+#define APBC_MMP2_PWM3		APBC_REG(0x048)
+#define APBC_MMP2_SSP0		APBC_REG(0x04c)
+#define APBC_MMP2_SSP1		APBC_REG(0x050)
+#define APBC_MMP2_SSP2		APBC_REG(0x054)
+#define APBC_MMP2_SSP3		APBC_REG(0x058)
+#define APBC_MMP2_SSP4		APBC_REG(0x05c)
+#define APBC_MMP2_SSP5		APBC_REG(0x060)
+#define APBC_MMP2_AIB		APBC_REG(0x064)
+#define APBC_MMP2_ASFAR		APBC_REG(0x068)
+#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
+#define APBC_MMP2_USIM		APBC_REG(0x070)
+#define APBC_MMP2_MPMU		APBC_REG(0x074)
+#define APBC_MMP2_IPC		APBC_REG(0x078)
+#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
+#define APBC_MMP2_TWSI6		APBC_REG(0x080)
+#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
+#define APBC_MMP2_UART4		APBC_REG(0x088)
+#define APBC_MMP2_RIPC		APBC_REG(0x08c)
+#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
+#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
+
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
index e5f0872..f882d91 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -17,10 +17,12 @@
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
 
 #define ICU_INT_CONF(n)		ICU_REG((n) << 2)
+#define ICU_INT_CONF_MASK	(0xf)
+
+/************ PXA168/PXA910 (MMP) *********************/
 #define ICU_INT_CONF_AP_INT	(1 << 6)
 #define ICU_INT_CONF_CP_INT	(1 << 5)
 #define ICU_INT_CONF_IRQ	(1 << 4)
-#define ICU_INT_CONF_MASK	(0xf)
 
 #define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
 #define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
@@ -28,4 +30,42 @@
 #define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
 #define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
 
+/************************** MMP2 ***********************/
+
+/*
+ * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
+ * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
+ */
+#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
+#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
+#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
+
+#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
+#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
+#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
+#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
+
+#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
+#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
+#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
+#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
+#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
+
+#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
+#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
+#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
+#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
+#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
+
+#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
+#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
+#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
+
+#define MMP2_ICU_INVERT			ICU_REG(0x164)
+
+#define MMP2_ICU_INV_PMIC		(1 << 0)
+#define MMP2_ICU_INV_PERF		(1 << 1)
+#define MMP2_ICU_INV_COMMTX		(1 << 2)
+#define MMP2_ICU_INV_COMMRX		(1 << 3)
+
 #endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h
new file mode 100644
index 0000000..e484d40
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/regs-smc.h
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
+ *
+ *  Static Memory Controller Registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_SMC_H
+#define __ASM_MACH_REGS_SMC_H
+
+#include <mach/addr-map.h>
+
+#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
+#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
+
+#define SMC_MSC0		SMC_REG(0x0020)
+#define SMC_MSC1		SMC_REG(0x0024)
+#define SMC_SXCNFG0		SMC_REG(0x0030)
+#define SMC_SXCNFG1		SMC_REG(0x0034)
+#define SMC_MEMCLKCFG		SMC_REG(0x0068)
+#define SMC_CSDFICFG0		SMC_REG(0x0090)
+#define SMC_CSDFICFG1		SMC_REG(0x0094)
+#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
+#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
+#define SMC_CSADRMAP0		SMC_REG(0x00c0)
+#define SMC_CSADRMAP1		SMC_REG(0x00c4)
+#define SMC_WE_AP0		SMC_REG(0x00e0)
+#define SMC_WE_AP1		SMC_REG(0x00e4)
+#define SMC_OE_AP0		SMC_REG(0x00f0)
+#define SMC_OE_AP1		SMC_REG(0x00f4)
+#define SMC_ADV_AP0		SMC_REG(0x0100)
+#define SMC_ADV_AP1		SMC_REG(0x0104)
+
+#endif /* __ASM_MACH_REGS_SMC_H */
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
index 6cebbd0..70c9f1d 100644
--- a/arch/arm/mach-mmp/include/mach/timex.h
+++ b/arch/arm/mach-mmp/include/mach/timex.h
@@ -6,4 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#ifdef CONFIG_CPU_MMP2
+#define CLOCK_TICK_RATE		6500000
+#else
 #define CLOCK_TICK_RATE		3250000
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa..85bd8a2 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -8,15 +8,16 @@
 
 #include <linux/serial_reg.h>
 #include <mach/addr-map.h>
+#include <asm/mach-types.h>
 
 #define UART1_BASE	(APB_PHYS_BASE + 0x36000)
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
+static volatile unsigned long *UART;
+
 static inline void putc(char c)
 {
-	volatile unsigned long *UART = (unsigned long *)UART2_BASE;
-
 	/* UART enabled? */
 	if (!(UART[UART_IER] & UART_IER_UUE))
 		return;
@@ -34,8 +35,17 @@ static inline void flush(void)
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+	/* default to UART2 */
+	UART = (unsigned long *)UART2_BASE;
+
+	if (machine_is_avengers_lite())
+		UART = (unsigned long *)UART3_BASE;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
+
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/include/mach/vmalloc.h b/arch/arm/mach-mmp/include/mach/vmalloc.h
index b60ccaf..1d0bac0 100644
--- a/arch/arm/mach-mmp/include/mach/vmalloc.h
+++ b/arch/arm/mach-mmp/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * linux/arch/arm/mach-mmp/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe000000
+#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
new file mode 100644
index 0000000..cb18221
--- /dev/null
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -0,0 +1,154 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq-mmp2.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *  Copyright:	Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+static void icu_mask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+	uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+	r |= ICU_INT_ROUTE_PJ4_IRQ;
+	__raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.mask		= icu_mask_irq,
+	.mask_ack	= icu_mask_irq,
+	.unmask		= icu_unmask_irq,
+};
+
+static void pmic_irq_ack(unsigned int irq)
+{
+	if (irq == IRQ_MMP2_PMIC)
+		mmp2_clear_pmic_int();
+}
+
+#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
+static void _name_##_mask_irq(unsigned int irq)				\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
+static void _name_##_unmask_irq(unsigned int irq)			\
+{									\
+	uint32_t r;							\
+	r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base));	\
+	__raw_writel(r, prefix##_MASK);					\
+}
+
+#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
+static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
+{									\
+	unsigned long status, mask, n;					\
+	mask = __raw_readl(prefix##_MASK);				\
+	while (1) {							\
+		status = __raw_readl(prefix##_STATUS) & ~mask;		\
+		if (status == 0)					\
+			break;						\
+		n = find_first_bit(&status, BITS_PER_LONG);		\
+		while (n < BITS_PER_LONG) {				\
+			generic_handle_irq(irq_base + n);		\
+			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
+		}							\
+	}								\
+}
+
+#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
+SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
+SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
+static struct irq_chip _name_##_irq_chip = {				\
+	.name		= #_name_,					\
+	.mask		= _name_##_mask_irq,				\
+	.unmask		= _name_##_unmask_irq,				\
+}
+
+SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
+SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
+SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
+SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
+SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
+
+static void init_mux_irq(struct irq_chip *chip, int start, int num)
+{
+	int irq;
+
+	for (irq = start; num > 0; irq++, num--) {
+		/* mask and clear the IRQ */
+		chip->mask(irq);
+		if (chip->ack)
+			chip->ack(irq);
+
+		set_irq_chip(irq, chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, handle_level_irq);
+	}
+}
+
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
+		icu_mask_irq(irq);
+		set_irq_chip(irq, &icu_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_SSP_MUX:
+			break;
+		default:
+			set_irq_handler(irq, handle_level_irq);
+			break;
+		}
+	}
+
+	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+	 * to be written to clear the interrupt
+	 */
+	pmic_irq_chip.ack = pmic_irq_ack;
+
+	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
+	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
+	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
+	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
+	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
+
+	set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
+	set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
+}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c
index 52ff2f0..52ff2f0 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq-pxa168.c
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 0000000..d77dd41
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,144 @@
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/mfd/max8925.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO29_UART1_RXD,
+	GPIO30_UART1_TXD,
+
+	/* UART3 */
+	GPIO51_UART3_RXD,
+	GPIO52_UART3_TXD,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+
+	/* PMIC */
+	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+	.constraints	= {
+		.name		= "vcc_core range",
+		.min_uV		= 1150000,
+		.max_uV		= 1280000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8649_supply[0],
+};
+
+static struct max8649_platform_data jasper_max8649_info = {
+	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
+	.extclk		= 0,
+	.ramp_timing	= MAX8649_RAMP_32MV,
+	.regulator	= &max8649_init_data,
+};
+
+static struct max8925_backlight_pdata jasper_backlight_data = {
+	.dual_string	= 0,
+};
+
+static struct max8925_power_pdata jasper_power_data = {
+	.batt_detect		= 0,	/* can't detect battery by ID pin */
+	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
+	.fast_charge		= MAX8925_FCHG_1000MA,
+};
+
+static struct max8925_platform_data jasper_max8925_info = {
+	.backlight		= &jasper_backlight_data,
+	.power			= &jasper_power_data,
+	.irq_base		= IRQ_BOARD_START,
+};
+
+static struct i2c_board_info jasper_twsi1_info[] = {
+	[0] = {
+		.type		= "max8649",
+		.addr		= 0x60,
+		.platform_data	= &jasper_max8649_info,
+	},
+	[1] = {
+		.type		= "max8925",
+		.addr		= 0x3c,
+		.irq		= IRQ_MMP2_PMIC,
+		.platform_data	= &jasper_max8925_info,
+	},
+};
+
+static void __init jasper_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(3);
+	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+
+	regulator_has_full_constraints();
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = mmp2_init_irq,
+	.timer          = &mmp2_timer,
+	.init_machine   = jasper_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
new file mode 100644
index 0000000..7f5eb05
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -0,0 +1,173 @@
+/*
+ * linux/arch/arm/mach-mmp/mmp2.c
+ *
+ * code name MMP2
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/hardware/cache-tauros2.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/dma.h>
+#include <mach/mfp.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
+
+#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
+
+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+
+	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
+	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
+	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
+
+	MFP_ADDR(GPIO102, 0x0),
+	MFP_ADDR(GPIO103, 0x4),
+	MFP_ADDR(GPIO104, 0x1fc),
+	MFP_ADDR(GPIO105, 0x1f8),
+	MFP_ADDR(GPIO106, 0x1f4),
+	MFP_ADDR(GPIO107, 0x1f0),
+	MFP_ADDR(GPIO108, 0x21c),
+	MFP_ADDR(GPIO109, 0x218),
+	MFP_ADDR(GPIO110, 0x214),
+	MFP_ADDR(GPIO111, 0x200),
+	MFP_ADDR(GPIO112, 0x244),
+	MFP_ADDR(GPIO113, 0x25c),
+	MFP_ADDR(GPIO114, 0x164),
+	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
+
+	MFP_ADDR(GPIO123, 0x148),
+	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
+
+	MFP_ADDR(GPIO142, 0x8),
+	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
+	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
+	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
+	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
+
+	MFP_ADDR(GPIO160, 0x250),
+	MFP_ADDR(GPIO161, 0x210),
+	MFP_ADDR(GPIO162, 0x20c),
+	MFP_ADDR(GPIO163, 0x208),
+	MFP_ADDR(GPIO164, 0x204),
+	MFP_ADDR(GPIO165, 0x1ec),
+	MFP_ADDR(GPIO166, 0x1e8),
+	MFP_ADDR(GPIO167, 0x1e4),
+	MFP_ADDR(GPIO168, 0x1e0),
+
+	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
+	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
+
+	MFP_ADDR(PMIC_INT, 0x2c4),
+	MFP_ADDR(CLK_REQ, 0x160),
+
+	MFP_ADDR_END,
+};
+
+void mmp2_clear_pmic_int(void)
+{
+	unsigned long mfpr_pmic, data;
+
+	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+	data = __raw_readl(mfpr_pmic);
+	__raw_writel(data | (1 << 6), mfpr_pmic);
+	__raw_writel(data, mfpr_pmic);
+}
+
+static void __init mmp2_init_gpio(void)
+{
+	int i;
+
+	/* enable GPIO clock */
+	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
+
+	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
+	for (i = 0; i < 6; i++)
+		__raw_writel(0xffffffff, APMASK(i));
+
+	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
+}
+
+void __init mmp2_init_irq(void)
+{
+	mmp2_init_icu();
+	mmp2_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
+static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
+static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
+static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
+static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+
+static struct clk_lookup mmp2_clkregs[] = {
+	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+};
+
+static int __init mmp2_init(void)
+{
+	if (cpu_is_mmp2()) {
+#ifdef CONFIG_CACHE_TAUROS2
+		tauros2_init();
+#endif
+		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(mmp2_addr_map);
+		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
+		clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
+	}
+
+	return 0;
+}
+postcore_initcall(mmp2_init);
+
+/* on-chip devices */
+MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
+MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
+MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
+MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
+MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
+MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
+MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
+MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
+MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
+MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
+MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 37dbdde..652ae66 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -72,6 +72,11 @@ static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
 static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
+static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
+static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
+static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
+static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
+static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
 
@@ -85,6 +90,11 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
@@ -94,7 +104,7 @@ static int __init pxa168_init(void)
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		clks_register(ARRAY_AND_SIZE(pxa168_clkregs));
+		clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 	}
 
 	return 0;
@@ -132,3 +142,8 @@ PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
 PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
+PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
+PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
+PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
+PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index d404950..46f2d69 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -131,7 +131,7 @@ static int __init pxa910_init(void)
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
 		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		clks_register(ARRAY_AND_SIZE(pxa910_clkregs));
+		clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index a8400bb..cf75694 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -30,7 +30,10 @@
 
 #include <mach/addr-map.h>
 #include <mach/regs-timers.h>
+#include <mach/regs-apbc.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <asm/mach/time.h>
 
 #include "clock.h"
 
@@ -158,7 +161,7 @@ static void __init timer_config(void)
 
 	__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-	ccr &= TMR_CCR_CS_0(0x3);
+	ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
 	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
 	/* free-running mode */
@@ -197,3 +200,24 @@ void __init timer_init(int irq)
 	clocksource_register(&cksrc);
 	clockevents_register_device(&ckevt);
 }
+
+static void __init mmp2_timer_init(void)
+{
+	unsigned long clk_rst;
+
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+	/*
+	 * enable bus/functional clock, enable 6.5MHz (divider 4),
+	 * release reset
+	 */
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+	timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+	.init	= mmp2_timer_init,
+};
+
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index f780086..47264a7 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,7 +1,80 @@
 if ARCH_MSM
 
-comment "MSM Board Type"
+choice
+	prompt "Qualcomm MSM SoC Type"
+	default ARCH_MSM7X00A
+
+config ARCH_MSM7X00A
+	bool "MSM7x00A / MSM7x01A"
+	select ARCH_MSM_ARM11
+	select MSM_SMD
+	select MSM_SMD_PKG3
+	select CPU_V6
+
+config ARCH_MSM7X30
+	bool "MSM7x30"
+	select ARCH_MSM_SCORPION
+	select MSM_SMD
+	select MSM_VIC
+	select CPU_V7
+	select MSM_REMOTE_SPINLOCK_DEKKERS
+
+config ARCH_QSD8X50
+	bool "QSD8X50"
+	select ARCH_MSM_SCORPION
+	select MSM_SMD
+	select MSM_VIC
+	select CPU_V7
+	select MSM_REMOTE_SPINLOCK_LDREX
+endchoice
+
+config MSM_SOC_REV_A
+	bool
+
+config  ARCH_MSM_ARM11
+	bool
+config  ARCH_MSM_SCORPION
+	bool
+
+config  MSM_VIC
+	bool
+
+menu "Qualcomm MSM Board Type"
+
+config MACH_HALIBUT
 	depends on ARCH_MSM
+	depends on ARCH_MSM7X00A
+	bool "Halibut Board (QCT SURF7201A)"
+	help
+	  Support for the Qualcomm SURF7201A eval board.
+
+config MACH_TROUT
+	depends on ARCH_MSM
+	depends on ARCH_MSM7X00A
+	bool "HTC Dream (aka trout)"
+	help
+	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+
+config MACH_MSM7X30_SURF
+	depends on ARCH_MSM7X30
+	bool "MSM7x30 SURF"
+	help
+	  Support for the Qualcomm MSM7x30 SURF eval board.
+
+config MACH_QSD8X50_SURF
+	depends on ARCH_QSD8X50
+	bool "QSD8x50 SURF"
+	help
+	  Support for the Qualcomm QSD8x50 SURF eval board.
+
+config MACH_QSD8X50A_ST1_5
+	depends on ARCH_QSD8X50
+	select MSM_SOC_REV_A
+	bool "QSD8x50A ST1.5"
+	help
+	  Support for the Qualcomm ST1.5.
+
+endmenu
 
 config MSM_DEBUG_UART
 	int
@@ -27,17 +100,10 @@ choice
 		bool "UART3"
 endchoice
 
-config MACH_HALIBUT
-	depends on ARCH_MSM
-	default y
-	bool "Halibut Board (QCT SURF7201A)"
-	help
-	  Support for the Qualcomm SURF7201A eval board.
+config MSM_SMD_PKG3
+	bool
 
-config MACH_TROUT
-	default y
-	bool "HTC Dream (aka trout)"
-	help
-	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+config MSM_SMD
+	bool
 
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 91e6f5c..66677f0 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,9 +1,22 @@
-obj-y += io.o idle.o irq.o timer.o dma.o
-obj-y += devices.o
 obj-y += proc_comm.o
+obj-y += io.o idle.o timer.o dma.o
 obj-y += vreg.o
-obj-y += clock.o clock-7x01a.o
+obj-y += acpuclock-arm11.o
+obj-y += clock.o clock-pcom.o
+obj-y += gpio.o
 
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+ifdef CONFIG_MSM_VIC
+obj-y += irq-vic.o
+else
+obj-y += irq.o
+endif
+
+obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
+obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
+obj-$(CONFIG_MSM_SMD) += last_radio_log.o
+
+obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o
+obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
+obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
+obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
 
-obj-$(CONFIG_MACH_TROUT) += board-dream.o
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
new file mode 100644
index 0000000..af5e85b
--- /dev/null
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -0,0 +1,526 @@
+/* arch/arm/mach-msm/acpuclock.c
+ *
+ * MSM architecture clock driver
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ * Author: San Mehat <san@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+#include "proc_comm.h"
+#include "acpuclock.h"
+
+
+#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
+#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
+#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
+
+/*
+ * ARM11 clock configuration for specific ACPU speeds
+ */
+
+#define ACPU_PLL_TCXO	-1
+#define ACPU_PLL_0	0
+#define ACPU_PLL_1	1
+#define ACPU_PLL_2	2
+#define ACPU_PLL_3	3
+
+#define PERF_SWITCH_DEBUG 0
+#define PERF_SWITCH_STEP_DEBUG 0
+
+struct clock_state
+{
+	struct clkctl_acpu_speed	*current_speed;
+	struct mutex			lock;
+	uint32_t			acpu_switch_time_us;
+	uint32_t			max_speed_delta_khz;
+	uint32_t			vdd_switch_time_us;
+	unsigned long			power_collapse_khz;
+	unsigned long			wait_for_irq_khz;
+};
+
+static struct clk *ebi1_clk;
+static struct clock_state drv_state = { 0 };
+
+static void __init acpuclk_init(void);
+
+/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
+enum {
+	VDD_0 = 0,
+	VDD_1 = 1,
+	VDD_2 = 2,
+	VDD_3 = 3,
+	VDD_4 = 3,
+	VDD_5 = 3,
+	VDD_6 = 3,
+	VDD_7 = 7,
+	VDD_END
+};
+
+struct clkctl_acpu_speed {
+	unsigned int	a11clk_khz;
+	int		pll;
+	unsigned int	a11clk_src_sel;
+	unsigned int	a11clk_src_div;
+	unsigned int	ahbclk_khz;
+	unsigned int	ahbclk_div;
+	int		vdd;
+	unsigned int 	axiclk_khz;
+	unsigned long	lpj; /* loops_per_jiffy */
+/* Index in acpu_freq_tbl[] for steppings. */
+	short		down;
+	short		up;
+};
+
+/*
+ * ACPU speed table. Complete table is shown but certain speeds are commented
+ * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ *
+ * Table stepping up/down is optimized for 256mhz jumps while staying on the
+ * same PLL.
+ */
+#if (0)
+static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
+	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
+	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },
+	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },
+	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },
+	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },
+	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },
+	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },
+	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },
+	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },
+	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
+	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },
+	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },
+	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
+	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+};
+#else /* Table of freq we currently use. */
+static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
+	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
+	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
+	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
+	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
+	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
+	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
+	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
+	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+};
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ_TABLE
+static struct cpufreq_frequency_table freq_table[] = {
+	{ 0, 122880 },
+	{ 1, 128000 },
+	{ 2, 245760 },
+	{ 3, 384000 },
+	{ 4, 528000 },
+	{ 5, CPUFREQ_TABLE_END },
+};
+#endif
+
+static int pc_pll_request(unsigned id, unsigned on)
+{
+	int res;
+	on = !!on;
+
+#if PERF_SWITCH_DEBUG
+	if (on)
+		printk(KERN_DEBUG "Enabling PLL %d\n", id);
+	else
+		printk(KERN_DEBUG "Disabling PLL %d\n", id);
+#endif
+
+	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
+	if (res < 0)
+		return res;
+
+#if PERF_SWITCH_DEBUG
+	if (on)
+		printk(KERN_DEBUG "PLL %d enabled\n", id);
+	else
+		printk(KERN_DEBUG "PLL %d disabled\n", id);
+#endif
+	return res;
+}
+
+
+/*----------------------------------------------------------------------------
+ * ARM11 'owned' clock control
+ *---------------------------------------------------------------------------*/
+
+unsigned long acpuclk_power_collapse(void) {
+	int ret = acpuclk_get_rate();
+	ret *= 1000;
+	if (ret > drv_state.power_collapse_khz)
+		acpuclk_set_rate(drv_state.power_collapse_khz, 1);
+	return ret;
+}
+
+unsigned long acpuclk_get_wfi_rate(void)
+{
+	return drv_state.wait_for_irq_khz;
+}
+
+unsigned long acpuclk_wait_for_irq(void) {
+	int ret = acpuclk_get_rate();
+	ret *= 1000;
+	if (ret > drv_state.wait_for_irq_khz)
+		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
+	return ret;
+}
+
+static int acpuclk_set_vdd_level(int vdd)
+{
+	uint32_t current_vdd;
+
+	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
+	       current_vdd, vdd);
+#endif
+	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
+	udelay(drv_state.vdd_switch_time_us);
+	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
+#if PERF_SWITCH_DEBUG
+		printk(KERN_ERR "acpuclock: VDD set failed\n");
+#endif
+		return -EIO;
+	}
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "acpuclock: VDD switched\n");
+#endif
+	return 0;
+}
+
+/* Set proper dividers for the given clock speed. */
+static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
+	uint32_t reg_clkctl, reg_clksel, clk_div;
+
+	/* AHB_CLK_DIV */
+	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
+	/*
+	 * If the new clock divider is higher than the previous, then
+	 * program the divider before switching the clock
+	 */
+	if (hunt_s->ahbclk_div > clk_div) {
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~(0x3 << 1);
+		reg_clksel |= (hunt_s->ahbclk_div << 1);
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
+		/* SRC0 */
+
+		/* Program clock source */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0x07 << 4);
+		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock divider */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~0xf;
+		reg_clkctl |= hunt_s->a11clk_src_div;
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock source selection */
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	} else {
+		/* SRC1 */
+
+		/* Program clock source */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0x07 << 12);
+		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock divider */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0xf << 8);
+		reg_clkctl |= (hunt_s->a11clk_src_div << 8);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock source selection */
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+
+	/*
+	 * If the new clock divider is lower than the previous, then
+	 * program the divider after switching the clock
+	 */
+	if (hunt_s->ahbclk_div < clk_div) {
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~(0x3 << 1);
+		reg_clksel |= (hunt_s->ahbclk_div << 1);
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+}
+
+int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
+{
+	uint32_t reg_clkctl;
+	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
+	int rc = 0;
+	unsigned int plls_enabled = 0, pll;
+
+	strt_s = cur_s = drv_state.current_speed;
+
+	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
+	if (cur_s == NULL)
+		return -ENOENT;
+
+	if (rate == (cur_s->a11clk_khz * 1000))
+		return 0;
+
+	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
+		if (tgt_s->a11clk_khz == (rate / 1000))
+			break;
+	}
+
+	if (tgt_s->a11clk_khz == 0)
+		return -EINVAL;
+
+	/* Choose the highest speed speed at or below 'rate' with same PLL. */
+	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
+		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
+			tgt_s--;
+	}
+
+	if (strt_s->pll != ACPU_PLL_TCXO)
+		plls_enabled |= 1 << strt_s->pll;
+
+	if (!for_power_collapse) {
+		mutex_lock(&drv_state.lock);
+		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
+			rc = pc_pll_request(tgt_s->pll, 1);
+			if (rc < 0) {
+				pr_err("PLL%d enable failed (%d)\n",
+					tgt_s->pll, rc);
+				goto out;
+			}
+			plls_enabled |= 1 << tgt_s->pll;
+		}
+		/* Increase VDD if needed. */
+		if (tgt_s->vdd > cur_s->vdd) {
+			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
+				printk(KERN_ERR "Unable to switch ACPU vdd\n");
+				goto out;
+			}
+		}
+	}
+
+	/* Set wait states for CPU inbetween frequency changes */
+	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
+	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
+	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
+#endif
+
+	while (cur_s != tgt_s) {
+		/*
+		 * Always jump to target freq if within 256mhz, regulardless of
+		 * PLL. If differnece is greater, use the predefinied
+		 * steppings in the table.
+		 */
+		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
+		if (d > drv_state.max_speed_delta_khz) {
+			/* Step up or down depending on target vs current. */
+			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
+				cur_s->up : cur_s->down;
+			if (clk_index < 0) { /* This should not happen. */
+				printk(KERN_ERR "cur:%u target: %u\n",
+					cur_s->a11clk_khz, tgt_s->a11clk_khz);
+				rc = -EINVAL;
+				goto out;
+			}
+			cur_s = &acpu_freq_tbl[clk_index];
+		} else {
+			cur_s = tgt_s;
+		}
+#if PERF_SWITCH_STEP_DEBUG
+		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
+			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
+#endif
+		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
+		    && !(plls_enabled & (1 << cur_s->pll))) {
+			rc = pc_pll_request(cur_s->pll, 1);
+			if (rc < 0) {
+				pr_err("PLL%d enable failed (%d)\n",
+					cur_s->pll, rc);
+				goto out;
+			}
+			plls_enabled |= 1 << cur_s->pll;
+		}
+
+		acpuclk_set_div(cur_s);
+		drv_state.current_speed = cur_s;
+		/* Re-adjust lpj for the new clock speed. */
+		loops_per_jiffy = cur_s->lpj;
+		udelay(drv_state.acpu_switch_time_us);
+	}
+
+	/* Nothing else to do for power collapse. */
+	if (for_power_collapse)
+		return 0;
+
+	/* Disable PLLs we are not using anymore. */
+	plls_enabled &= ~(1 << tgt_s->pll);
+	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
+		if (plls_enabled & (1 << pll)) {
+			rc = pc_pll_request(pll, 0);
+			if (rc < 0) {
+				pr_err("PLL%d disable failed (%d)\n", pll, rc);
+				goto out;
+			}
+		}
+
+	/* Change the AXI bus frequency if we can. */
+	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
+		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
+		if (rc < 0)
+			pr_err("Setting AXI min rate failed!\n");
+	}
+
+	/* Drop VDD level if we can. */
+	if (tgt_s->vdd < strt_s->vdd) {
+		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
+			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
+	}
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
+#endif
+out:
+	if (!for_power_collapse)
+		mutex_unlock(&drv_state.lock);
+	return rc;
+}
+
+static void __init acpuclk_init(void)
+{
+	struct clkctl_acpu_speed *speed;
+	uint32_t div, sel;
+	int rc;
+
+	/*
+	 * Determine the rate of ACPU clock
+	 */
+
+	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
+		/* CLK_SRC0_SEL */
+		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
+		/* CLK_SRC0_DIV */
+		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
+	} else {
+		/* CLK_SRC1_SEL */
+		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
+		/* CLK_SRC1_DIV */
+		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
+	}
+
+	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
+		if (speed->a11clk_src_sel == sel
+		 && (speed->a11clk_src_div == div))
+			break;
+	}
+	if (speed->a11clk_khz == 0) {
+		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
+		return;
+	}
+
+	drv_state.current_speed = speed;
+
+	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
+	if (rc < 0)
+		pr_err("Setting AXI min rate failed!\n");
+
+	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
+}
+
+unsigned long acpuclk_get_rate(void)
+{
+	WARN_ONCE(drv_state.current_speed == NULL,
+		  "acpuclk_get_rate: not initialized\n");
+	if (drv_state.current_speed)
+		return drv_state.current_speed->a11clk_khz;
+	else
+		return 0;
+}
+
+uint32_t acpuclk_get_switch_time(void)
+{
+	return drv_state.acpu_switch_time_us;
+}
+
+/*----------------------------------------------------------------------------
+ * Clock driver initialization
+ *---------------------------------------------------------------------------*/
+
+/* Initalize the lpj field in the acpu_freq_tbl. */
+static void __init lpj_init(void)
+{
+	int i;
+	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
+	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
+		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
+						base_clk->a11clk_khz,
+						acpu_freq_tbl[i].a11clk_khz);
+	}
+}
+
+void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
+{
+	pr_info("acpu_clock_init()\n");
+
+	ebi1_clk = clk_get(NULL, "ebi1_clk");
+
+	mutex_init(&drv_state.lock);
+	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
+	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
+	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
+	drv_state.power_collapse_khz = clkdata->power_collapse_khz;
+	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
+	acpuclk_init();
+	lpj_init();
+#ifdef CONFIG_CPU_FREQ_TABLE
+	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
+#endif
+}
diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h
new file mode 100644
index 0000000..415de2e
--- /dev/null
+++ b/arch/arm/mach-msm/acpuclock.h
@@ -0,0 +1,32 @@
+/* arch/arm/mach-msm/acpuclock.h
+ *
+ * MSM architecture clock driver header
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ * Author: San Mehat <san@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
+#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
+
+int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
+unsigned long acpuclk_get_rate(void);
+uint32_t acpuclk_get_switch_time(void);
+unsigned long acpuclk_wait_for_irq(void);
+unsigned long acpuclk_power_collapse(void);
+unsigned long acpuclk_get_wfi_rate(void);
+
+
+#endif
+
diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c
deleted file mode 100644
index 21afa85..0000000
--- a/arch/arm/mach-msm/board-dream.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* linux/arch/arm/mach-msm/board-dream.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-#include "board-dream.h"
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init trout_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
-				char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
-	mi->bank[0].size = (101*1024*1024);
-}
-
-static void __init trout_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc trout_io_desc[] __initdata = {
-	{
-		.virtual = TROUT_CPLD_BASE,
-		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
-		.length  = TROUT_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init trout_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
-
-#ifdef CONFIG_MSM_DEBUG_UART3
-	/* route UART3 to the "H2W" extended usb connector */
-	writeb(0x80, TROUT_CPLD_BASE + 0x00);
-#endif
-
-	msm_clock_init();
-}
-
-MACHINE_START(TROUT, "HTC Dream")
-	.phys_io	= MSM_DEBUG_UART_PHYS,
-	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x10000100,
-	.fixup		= trout_fixup,
-	.map_io		= trout_map_io,
-	.init_irq	= trout_init_irq,
-	.init_machine	= trout_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index e61967d..7bd72e8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
+#include <asm/setup.h>
 
 #include <mach/irqs.h>
 #include <mach/board.h>
@@ -77,14 +78,28 @@ static void __init halibut_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
+static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks=1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
-	msm_clock_init();
+	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
 	.boot_params	= 0x10000100,
+	.fixup		= halibut_fixup,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
new file mode 100644
index 0000000..bcbefdf
--- /dev/null
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -0,0 +1,87 @@
+/* linux/arch/arm/mach-msm/board-mahimahi.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Copyright (C) 2009 HTC Corporation.
+ * Author: Dima Zavin <dima@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+
+#include "board-mahimahi.h"
+#include "devices.h"
+#include "proc_comm.h"
+
+static uint debug_uart;
+
+module_param_named(debug_uart, debug_uart, uint, 0);
+
+static struct platform_device *devices[] __initdata = {
+#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
+	&msm_device_uart1,
+#endif
+	&msm_device_uart_dm1,
+	&msm_device_nand,
+};
+
+static void __init mahimahi_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mahimahi_fixup(struct machine_desc *desc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (219*1024*1024);
+	mi->bank[1].start = MSM_HIGHMEM_BASE;
+	mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
+	mi->bank[1].size = MSM_HIGHMEM_SIZE;
+}
+
+static void __init mahimahi_map_io(void)
+{
+	msm_map_common_io();
+	msm_clock_init();
+}
+
+extern struct sys_timer msm_timer;
+
+MACHINE_START(MAHIMAHI, "mahimahi")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= 0x20000100,
+	.fixup		= mahimahi_fixup,
+	.map_io		= mahimahi_map_io,
+	.init_irq	= msm_init_irq,
+	.init_machine	= mahimahi_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
new file mode 100644
index 0000000..db9381b
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
+#ifdef CONFIG_CACHE_L2X0
+#include <asm/hardware/cache-l2x0.h>
+#endif
+
+#include <mach/vreg.h>
+#include <mach/mpp.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "devices.h"
+#include "socinfo.h"
+#include "clock.h"
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x9C004300,
+		.end	= 0x9C0043ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSM_GPIO_TO_INT(132),
+		.end	= MSM_GPIO_TO_INT(132),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_dmov,
+	&msm_device_nand,
+	&smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init msm7x2x_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x2x_init(void)
+{
+	if (socinfo_init() < 0)
+		BUG();
+
+	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
+		smc91x_resources[0].start = 0x98000300;
+		smc91x_resources[0].end = 0x980003ff;
+		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
+		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
+		if (gpio_tlmm_config(GPIO_CFG(85, 0,
+					      GPIO_INPUT,
+					      GPIO_PULL_DOWN,
+					      GPIO_2MA),
+				     GPIO_ENABLE)) {
+			printk(KERN_ERR
+			       "%s: Err: Config GPIO-85 INT\n",
+				__func__);
+		}
+	}
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init msm7x2x_map_io(void)
+{
+	msm_map_common_io();
+	/* Technically dependent on the SoC but using machine_is
+	 * macros since socinfo is not available this early and there
+	 * are plans to restructure the code which will eliminate the
+	 * need for socinfo.
+	 */
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
+		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
+
+	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
+		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
+
+#ifdef CONFIG_CACHE_L2X0
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
+		/* 7x27 has 256KB L2 cache:
+			64Kb/Way and 4-Way Associativity;
+			R/W latency: 3 cycles;
+			evmon/parity/share disabled. */
+		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
+	}
+#endif
+}
+
+MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
new file mode 100644
index 0000000..e329819
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -0,0 +1,119 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/memory.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+
+#include <mach/vreg.h>
+#include "devices.h"
+#include "proc_comm.h"
+
+extern struct sys_timer msm_timer;
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+static struct msm_gpio uart2_config_data[] = {
+	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
+	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
+	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static void msm7x30_init_uart2(void)
+{
+	msm_gpios_request_enable(uart2_config_data,
+			ARRAY_SIZE(uart2_config_data));
+
+}
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
+        &msm_device_uart2,
+#endif
+
+};
+
+static void __init msm7x30_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x30_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	msm7x30_init_uart2();
+#endif
+
+}
+
+static void __init msm7x30_map_io(void)
+{
+	msm_map_msm7x30_io();
+	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
+}
+
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
new file mode 100644
index 0000000..e3cc807
--- /dev/null
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -0,0 +1,93 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "devices.h"
+
+extern struct sys_timer msm_timer;
+
+static struct msm_gpio uart3_config_data[] = {
+	{ GPIO_CFG(86, 1, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+};
+
+static void msm8x50_init_uart3(void)
+{
+	msm_gpios_request_enable(uart3_config_data,
+				ARRAY_SIZE(uart3_config_data));
+}
+
+static void __init qsd8x50_map_io(void)
+{
+	msm_map_qsd8x50_io();
+	msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
+}
+
+static void __init qsd8x50_init_irq(void)
+{
+	msm_init_irq();
+	msm_init_sirc();
+}
+
+static void __init qsd8x50_init(void)
+{
+	msm8x50_init_uart3();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
new file mode 100644
index 0000000..2bc1b9d
--- /dev/null
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -0,0 +1,118 @@
+/* linux/arch/arm/mach-msm/board-sapphire.c
+ * Copyright (C) 2007-2009 HTC Corporation.
+ * Author: Thomas Tsai <thomas_tsai@htc.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <linux/delay.h>
+
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/system.h>
+#include <mach/system.h>
+#include <mach/vreg.h>
+#include <mach/board.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/setup.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpio_chip.h"
+#include "board-sapphire.h"
+#include "proc_comm.h"
+#include "devices.h"
+
+void msm_init_irq(void);
+void msm_init_gpio(void);
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_smd,
+	&msm_device_dmov,
+	&msm_device_nand,
+	&msm_device_uart1,
+	&msm_device_uart3,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init sapphire_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init sapphire_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc sapphire_io_desc[] __initdata = {
+	{
+		.virtual = SAPPHIRE_CPLD_BASE,
+		.pfn     = __phys_to_pfn(SAPPHIRE_CPLD_START),
+		.length  = SAPPHIRE_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init sapphire_fixup(struct machine_desc *desc, struct tag *tags,
+				  char **cmdline, struct meminfo *mi)
+{
+	int smi_sz = parse_tag_smi((const struct tag *)tags);
+
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	if (smi_sz == 32) {
+		mi->bank[0].size = (84*1024*1024);
+	} else if (smi_sz == 64) {
+		mi->bank[0].size = (101*1024*1024);
+	} else {
+		/* Give a default value when not get smi size */
+		smi_sz = 64;
+		mi->bank[0].size = (101*1024*1024);
+	}
+}
+
+static void __init sapphire_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
+	msm_clock_init();
+}
+
+MACHINE_START(SAPPHIRE, "sapphire")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.fixup          = sapphire_fixup,
+	.map_io         = sapphire_map_io,
+	.init_irq       = sapphire_init_irq,
+	.init_machine   = sapphire_init,
+	.timer          = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
new file mode 100644
index 0000000..dca5a5f
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout.c
@@ -0,0 +1,95 @@
+/* linux/arch/arm/mach-msm/board-trout.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "devices.h"
+#include "board-trout.h"
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init trout_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
+				char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
+static void __init trout_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc trout_io_desc[] __initdata = {
+	{
+		.virtual = TROUT_CPLD_BASE,
+		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
+		.length  = TROUT_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init trout_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
+
+#ifdef CONFIG_MSM_DEBUG_UART3
+	/* route UART3 to the "H2W" extended usb connector */
+	writeb(0x80, TROUT_CPLD_BASE + 0x00);
+#endif
+
+	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
+}
+
+MACHINE_START(TROUT, "HTC Dream")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io	= MSM_DEBUG_UART_PHYS,
+	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= 0x10000100,
+	.fixup		= trout_fixup,
+	.map_io		= trout_map_io,
+	.init_irq	= trout_init_irq,
+	.init_machine	= trout_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5..4f345a5 100644
--- a/arch/arm/mach-msm/board-dream.h
+++ b/arch/arm/mach-msm/board-trout.h
diff --git a/arch/arm/mach-msm/clock-7x01a.c b/arch/arm/mach-msm/clock-7x01a.c
deleted file mode 100644
index 62230a3..0000000
--- a/arch/arm/mach-msm/clock-7x01a.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/* arch/arm/mach-msm/clock-7x01a.c
- *
- * Clock tables for MSM7X01A
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include "clock.h"
-#include "devices.h"
-
-/* clock IDs used by the modem processor */
-
-#define ACPU_CLK	0   /* Applications processor clock */
-#define ADM_CLK		1   /* Applications data mover clock */
-#define ADSP_CLK	2   /* ADSP clock */
-#define EBI1_CLK	3   /* External bus interface 1 clock */
-#define EBI2_CLK	4   /* External bus interface 2 clock */
-#define ECODEC_CLK	5   /* External CODEC clock */
-#define EMDH_CLK	6   /* External MDDI host clock */
-#define GP_CLK		7   /* General purpose clock */
-#define GRP_CLK		8   /* Graphics clock */
-#define I2C_CLK		9   /* I2C clock */
-#define ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
-#define ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
-#define IMEM_CLK	12  /* Internal graphics memory clock */
-#define MDC_CLK		13  /* MDDI client clock */
-#define MDP_CLK		14  /* Mobile display processor clock */
-#define PBUS_CLK	15  /* Peripheral bus clock */
-#define PCM_CLK		16  /* PCM clock */
-#define PMDH_CLK	17  /* Primary MDDI host clock */
-#define SDAC_CLK	18  /* Stereo DAC clock */
-#define SDC1_CLK	19  /* Secure Digital Card clocks */
-#define SDC1_PCLK	20
-#define SDC2_CLK	21
-#define SDC2_PCLK	22
-#define SDC3_CLK	23
-#define SDC3_PCLK	24
-#define SDC4_CLK	25
-#define SDC4_PCLK	26
-#define TSIF_CLK	27  /* Transport Stream Interface clocks */
-#define TSIF_REF_CLK	28
-#define TV_DAC_CLK	29  /* TV clocks */
-#define TV_ENC_CLK	30
-#define UART1_CLK	31  /* UART clocks */
-#define UART2_CLK	32
-#define UART3_CLK	33
-#define UART1DM_CLK	34
-#define UART2DM_CLK	35
-#define USB_HS_CLK	36  /* High speed USB core clock */
-#define USB_HS_PCLK	37  /* High speed USB pbus clock */
-#define USB_OTG_CLK	38  /* Full speed USB clock */
-#define VDC_CLK		39  /* Video controller clock */
-#define VFE_CLK		40  /* Camera / Video Front End clock */
-#define VFE_MDC_CLK	41  /* VFE MDDI client clock */
-
-#define NR_CLKS		42
-
-#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.name = clk_name, \
-	.id = clk_id, \
-	.flags = clk_flags, \
-	.dev = clk_dev, \
-	}
-
-#define OFF CLKFLAG_AUTO_OFF
-#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET
-
-struct clk msm_clocks[] = {
-	CLOCK("adm_clk",	ADM_CLK,	NULL, 0),
-	CLOCK("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLOCK("ebi1_clk",	EBI1_CLK,	NULL, 0),
-	CLOCK("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLOCK("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLOCK("emdh_clk",	EMDH_CLK,	NULL, OFF),
-	CLOCK("gp_clk",		GP_CLK,		NULL, 0),
-	CLOCK("grp_clk",	GRP_CLK,	NULL, OFF),
-	CLOCK("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
-	CLOCK("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLOCK("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLOCK("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLOCK("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLOCK("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLOCK("pbus_clk",	PBUS_CLK,	NULL, 0),
-	CLOCK("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLOCK("pmdh_clk",	PMDH_CLK,	NULL, OFF | MINMAX),
-	CLOCK("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLOCK("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
-	CLOCK("sdc_pclk",	SDC1_PCLK,	&msm_device_sdc1.dev, OFF),
-	CLOCK("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
-	CLOCK("sdc_pclk",	SDC2_PCLK,	&msm_device_sdc2.dev, OFF),
-	CLOCK("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
-	CLOCK("sdc_pclk",	SDC3_PCLK,	&msm_device_sdc3.dev, OFF),
-	CLOCK("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
-	CLOCK("sdc_pclk",	SDC4_PCLK,	&msm_device_sdc4.dev, OFF),
-	CLOCK("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLOCK("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLOCK("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLOCK("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLOCK("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
-	CLOCK("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
-	CLOCK("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
-	CLOCK("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLOCK("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
-	CLOCK("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
-	CLOCK("usb_hs_pclk",	USB_HS_PCLK,	&msm_device_hsusb.dev, OFF),
-	CLOCK("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLOCK("vdc_clk",	VDC_CLK,	NULL, OFF | MINMAX),
-	CLOCK("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLOCK("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-};
-
-unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks);
diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h
new file mode 100644
index 0000000..e16f72f
--- /dev/null
+++ b/arch/arm/mach-msm/clock-7x30.h
@@ -0,0 +1,168 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
+
+enum {
+	L_7X30_NONE_CLK = -1,
+	L_7X30_ADM_CLK,
+	L_7X30_I2C_CLK,
+	L_7X30_I2C_2_CLK,
+	L_7X30_QUP_I2C_CLK,
+	L_7X30_UART1DM_CLK,
+	L_7X30_UART1DM_P_CLK,
+	L_7X30_UART2DM_CLK,
+	L_7X30_UART2DM_P_CLK,
+	L_7X30_EMDH_CLK,
+	L_7X30_EMDH_P_CLK,
+	L_7X30_PMDH_CLK,
+	L_7X30_PMDH_P_CLK,
+	L_7X30_GRP_2D_CLK,
+	L_7X30_GRP_2D_P_CLK,
+	L_7X30_GRP_3D_SRC_CLK,
+	L_7X30_GRP_3D_CLK,
+	L_7X30_GRP_3D_P_CLK,
+	L_7X30_IMEM_CLK,
+	L_7X30_SDC1_CLK,
+	L_7X30_SDC1_P_CLK,
+	L_7X30_SDC2_CLK,
+	L_7X30_SDC2_P_CLK,
+	L_7X30_SDC3_CLK,
+	L_7X30_SDC3_P_CLK,
+	L_7X30_SDC4_CLK,
+	L_7X30_SDC4_P_CLK,
+	L_7X30_MDP_CLK,
+	L_7X30_MDP_P_CLK,
+	L_7X30_MDP_LCDC_PCLK_CLK,
+	L_7X30_MDP_LCDC_PAD_PCLK_CLK,
+	L_7X30_MDP_VSYNC_CLK,
+	L_7X30_MI2S_CODEC_RX_M_CLK,
+	L_7X30_MI2S_CODEC_RX_S_CLK,
+	L_7X30_MI2S_CODEC_TX_M_CLK,
+	L_7X30_MI2S_CODEC_TX_S_CLK,
+	L_7X30_MI2S_M_CLK,
+	L_7X30_MI2S_S_CLK,
+	L_7X30_LPA_CODEC_CLK,
+	L_7X30_LPA_CORE_CLK,
+	L_7X30_LPA_P_CLK,
+	L_7X30_MIDI_CLK,
+	L_7X30_MDC_CLK,
+	L_7X30_ROTATOR_IMEM_CLK,
+	L_7X30_ROTATOR_P_CLK,
+	L_7X30_SDAC_M_CLK,
+	L_7X30_SDAC_CLK,
+	L_7X30_UART1_CLK,
+	L_7X30_UART2_CLK,
+	L_7X30_UART3_CLK,
+	L_7X30_TV_CLK,
+	L_7X30_TV_DAC_CLK,
+	L_7X30_TV_ENC_CLK,
+	L_7X30_HDMI_CLK,
+	L_7X30_TSIF_REF_CLK,
+	L_7X30_TSIF_P_CLK,
+	L_7X30_USB_HS_SRC_CLK,
+	L_7X30_USB_HS_CLK,
+	L_7X30_USB_HS_CORE_CLK,
+	L_7X30_USB_HS_P_CLK,
+	L_7X30_USB_HS2_CLK,
+	L_7X30_USB_HS2_CORE_CLK,
+	L_7X30_USB_HS2_P_CLK,
+	L_7X30_USB_HS3_CLK,
+	L_7X30_USB_HS3_CORE_CLK,
+	L_7X30_USB_HS3_P_CLK,
+	L_7X30_VFE_CLK,
+	L_7X30_VFE_P_CLK,
+	L_7X30_VFE_MDC_CLK,
+	L_7X30_VFE_CAMIF_CLK,
+	L_7X30_CAMIF_PAD_P_CLK,
+	L_7X30_CAM_M_CLK,
+	L_7X30_JPEG_CLK,
+	L_7X30_JPEG_P_CLK,
+	L_7X30_VPE_CLK,
+	L_7X30_MFC_CLK,
+	L_7X30_MFC_DIV2_CLK,
+	L_7X30_MFC_P_CLK,
+	L_7X30_SPI_CLK,
+	L_7X30_SPI_P_CLK,
+	L_7X30_CSI0_CLK,
+	L_7X30_CSI0_VFE_CLK,
+	L_7X30_CSI0_P_CLK,
+	L_7X30_CSI1_CLK,
+	L_7X30_CSI1_VFE_CLK,
+	L_7X30_CSI1_P_CLK,
+	L_7X30_GLBL_ROOT_CLK,
+
+	L_7X30_AXI_LI_VG_CLK,
+	L_7X30_AXI_LI_GRP_CLK,
+	L_7X30_AXI_LI_JPEG_CLK,
+	L_7X30_AXI_GRP_2D_CLK,
+	L_7X30_AXI_MFC_CLK,
+	L_7X30_AXI_VPE_CLK,
+	L_7X30_AXI_LI_VFE_CLK,
+	L_7X30_AXI_LI_APPS_CLK,
+	L_7X30_AXI_MDP_CLK,
+	L_7X30_AXI_IMEM_CLK,
+	L_7X30_AXI_LI_ADSP_A_CLK,
+	L_7X30_AXI_ROTATOR_CLK,
+
+	L_7X30_NR_CLKS
+};
+
+struct clk_ops;
+extern struct clk_ops clk_ops_7x30;
+
+struct clk_ops *clk_7x30_is_local(uint32_t id);
+int clk_7x30_init(void);
+
+void pll_enable(uint32_t pll);
+void pll_disable(uint32_t pll);
+
+extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
+
+#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = L_7X30_##clk_id, \
+	.remote_id = P_##clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #clk_id, \
+	}
+
+#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = L_7X30_##l_id, \
+	.remote_id = P_##r_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #l_id, \
+	}
+
+#endif
+
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
new file mode 100644
index 0000000..a3b4562
--- /dev/null
+++ b/arch/arm/mach-msm/clock-pcom.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/stddef.h>
+#include <mach/clk.h>
+
+#include "proc_comm.h"
+#include "clock.h"
+
+/*
+ * glue for the proc_comm interface
+ */
+int pc_clk_enable(unsigned id)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+void pc_clk_disable(unsigned id)
+{
+	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
+}
+
+int pc_clk_reset(unsigned id, enum clk_reset_action action)
+{
+	int rc;
+
+	if (action == CLK_RESET_ASSERT)
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
+	else
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
+
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_rate(unsigned id, unsigned rate)
+{
+	/* The rate _might_ be rounded off to the nearest KHz value by the
+	 * remote function. So a return value of 0 doesn't necessarily mean
+	 * that the exact rate was set successfully.
+	 */
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_min_rate(unsigned id, unsigned rate)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_max_rate(unsigned id, unsigned rate)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_flags(unsigned id, unsigned flags)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+unsigned pc_clk_get_rate(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+unsigned pc_clk_is_enabled(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+long pc_clk_round_rate(unsigned id, unsigned rate)
+{
+
+	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
+	return rate;
+}
+
+struct clk_ops clk_ops_pcom = {
+	.enable = pc_clk_enable,
+	.disable = pc_clk_disable,
+	.auto_off = pc_clk_disable,
+	.reset = pc_clk_reset,
+	.set_rate = pc_clk_set_rate,
+	.set_min_rate = pc_clk_set_min_rate,
+	.set_max_rate = pc_clk_set_max_rate,
+	.set_flags = pc_clk_set_flags,
+	.get_rate = pc_clk_get_rate,
+	.is_enabled = pc_clk_is_enabled,
+	.round_rate = pc_clk_round_rate,
+};
diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h
new file mode 100644
index 0000000..17d027b
--- /dev/null
+++ b/arch/arm/mach-msm/clock-pcom.h
@@ -0,0 +1,153 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
+
+/* clock IDs used by the modem processor */
+
+#define P_ACPU_CLK	0   /* Applications processor clock */
+#define P_ADM_CLK	1   /* Applications data mover clock */
+#define P_ADSP_CLK	2   /* ADSP clock */
+#define P_EBI1_CLK	3   /* External bus interface 1 clock */
+#define P_EBI2_CLK	4   /* External bus interface 2 clock */
+#define P_ECODEC_CLK	5   /* External CODEC clock */
+#define P_EMDH_CLK	6   /* External MDDI host clock */
+#define P_GP_CLK	7   /* General purpose clock */
+#define P_GRP_3D_CLK	8   /* Graphics clock */
+#define P_I2C_CLK	9   /* I2C clock */
+#define P_ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
+#define P_ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
+#define P_IMEM_CLK	12  /* Internal graphics memory clock */
+#define P_MDC_CLK	13  /* MDDI client clock */
+#define P_MDP_CLK	14  /* Mobile display processor clock */
+#define P_PBUS_CLK	15  /* Peripheral bus clock */
+#define P_PCM_CLK	16  /* PCM clock */
+#define P_PMDH_CLK	17  /* Primary MDDI host clock */
+#define P_SDAC_CLK	18  /* Stereo DAC clock */
+#define P_SDC1_CLK	19  /* Secure Digital Card clocks */
+#define P_SDC1_P_CLK	20
+#define P_SDC2_CLK	21
+#define P_SDC2_P_CLK	22
+#define P_SDC3_CLK	23
+#define P_SDC3_P_CLK	24
+#define P_SDC4_CLK	25
+#define P_SDC4_P_CLK	26
+#define P_TSIF_CLK	27  /* Transport Stream Interface clocks */
+#define P_TSIF_REF_CLK	28
+#define P_TV_DAC_CLK	29  /* TV clocks */
+#define P_TV_ENC_CLK	30
+#define P_UART1_CLK	31  /* UART clocks */
+#define P_UART2_CLK	32
+#define P_UART3_CLK	33
+#define P_UART1DM_CLK	34
+#define P_UART2DM_CLK	35
+#define P_USB_HS_CLK	36  /* High speed USB core clock */
+#define P_USB_HS_P_CLK	37  /* High speed USB pbus clock */
+#define P_USB_OTG_CLK	38  /* Full speed USB clock */
+#define P_VDC_CLK	39  /* Video controller clock */
+#define P_VFE_MDC_CLK	40  /* Camera / Video Front End clock */
+#define P_VFE_CLK	41  /* VFE MDDI client clock */
+#define P_MDP_LCDC_PCLK_CLK	42
+#define P_MDP_LCDC_PAD_PCLK_CLK 43
+#define P_MDP_VSYNC_CLK	44
+#define P_SPI_CLK	45
+#define P_VFE_AXI_CLK	46
+#define P_USB_HS2_CLK	47  /* High speed USB 2 core clock */
+#define P_USB_HS2_P_CLK	48  /* High speed USB 2 pbus clock */
+#define P_USB_HS3_CLK	49  /* High speed USB 3 core clock */
+#define P_USB_HS3_P_CLK	50  /* High speed USB 3 pbus clock */
+#define P_GRP_3D_P_CLK	51  /* Graphics pbus clock */
+#define P_USB_PHY_CLK	52  /* USB PHY clock */
+#define P_USB_HS_CORE_CLK	53  /* High speed USB 1 core clock */
+#define P_USB_HS2_CORE_CLK	54  /* High speed USB 2 core clock */
+#define P_USB_HS3_CORE_CLK	55  /* High speed USB 3 core clock */
+#define P_CAM_M_CLK		56
+#define P_CAMIF_PAD_P_CLK	57
+#define P_GRP_2D_CLK		58
+#define P_GRP_2D_P_CLK		59
+#define P_I2S_CLK		60
+#define P_JPEG_CLK		61
+#define P_JPEG_P_CLK		62
+#define P_LPA_CODEC_CLK		63
+#define P_LPA_CORE_CLK		64
+#define P_LPA_P_CLK		65
+#define P_MDC_IO_CLK		66
+#define P_MDC_P_CLK		67
+#define P_MFC_CLK		68
+#define P_MFC_DIV2_CLK		69
+#define P_MFC_P_CLK		70
+#define P_QUP_I2C_CLK		71
+#define P_ROTATOR_IMEM_CLK	72
+#define P_ROTATOR_P_CLK		73
+#define P_VFE_CAMIF_CLK		74
+#define P_VFE_P_CLK		75
+#define P_VPE_CLK		76
+#define P_I2C_2_CLK		77
+#define P_MI2S_CODEC_RX_S_CLK	78
+#define P_MI2S_CODEC_RX_M_CLK	79
+#define P_MI2S_CODEC_TX_S_CLK	80
+#define P_MI2S_CODEC_TX_M_CLK	81
+#define P_PMDH_P_CLK		82
+#define P_EMDH_P_CLK		83
+#define P_SPI_P_CLK		84
+#define P_TSIF_P_CLK		85
+#define P_MDP_P_CLK		86
+#define P_SDAC_M_CLK		87
+#define P_MI2S_S_CLK		88
+#define P_MI2S_M_CLK		89
+#define P_AXI_ROTATOR_CLK	90
+#define P_HDMI_CLK		91
+#define P_CSI0_CLK		92
+#define P_CSI0_VFE_CLK		93
+#define P_CSI0_P_CLK		94
+#define P_CSI1_CLK		95
+#define P_CSI1_VFE_CLK		96
+#define P_CSI1_P_CLK		97
+#define P_GSBI_CLK		98
+#define P_GSBI_P_CLK		99
+
+#define P_NR_CLKS		100
+
+struct clk_ops;
+extern struct clk_ops clk_ops_pcom;
+
+int pc_clk_reset(unsigned id, enum clk_reset_action action);
+
+#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = P_##clk_id, \
+	.remote_id = P_##clk_id, \
+	.ops = &clk_ops_pcom, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #clk_id, \
+	}
+
+#endif
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index 3b1ce36..9cb1276 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.c
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -22,68 +22,27 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/ctype.h>
+#include <linux/pm_qos_params.h>
+#include <mach/clk.h>
 
 #include "clock.h"
 #include "proc_comm.h"
+#include "clock-7x30.h"
 
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clocks_lock);
 static LIST_HEAD(clocks);
+struct clk *msm_clocks;
+unsigned msm_num_clocks;
 
 /*
- * glue for the proc_comm interface
+ * Bitmap of enabled clocks, excluding ACPU which is always
+ * enabled
  */
-static inline int pc_clk_enable(unsigned id)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
-}
-
-static inline void pc_clk_disable(unsigned id)
-{
-	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
-}
-
-static inline int pc_clk_set_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_min_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_max_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_flags(unsigned id, unsigned flags)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
-}
-
-static inline unsigned pc_clk_get_rate(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static inline unsigned pc_clk_is_enabled(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static inline int pc_pll_request(unsigned id, unsigned on)
-{
-	on = !!on;
-	return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
-}
+static DECLARE_BITMAP(clock_map_enabled, NR_CLKS);
+static DEFINE_SPINLOCK(clock_map_lock);
 
 /*
  * Standard clock functions defined in include/linux/clk.h
@@ -119,8 +78,12 @@ int clk_enable(struct clk *clk)
 	unsigned long flags;
 	spin_lock_irqsave(&clocks_lock, flags);
 	clk->count++;
-	if (clk->count == 1)
-		pc_clk_enable(clk->id);
+	if (clk->count == 1) {
+		clk->ops->enable(clk->id);
+		spin_lock(&clock_map_lock);
+		clock_map_enabled[BIT_WORD(clk->id)] |= BIT_MASK(clk->id);
+		spin_unlock(&clock_map_lock);
+	}
 	spin_unlock_irqrestore(&clocks_lock, flags);
 	return 0;
 }
@@ -132,31 +95,54 @@ void clk_disable(struct clk *clk)
 	spin_lock_irqsave(&clocks_lock, flags);
 	BUG_ON(clk->count == 0);
 	clk->count--;
-	if (clk->count == 0)
-		pc_clk_disable(clk->id);
+	if (clk->count == 0) {
+		clk->ops->disable(clk->id);
+		spin_lock(&clock_map_lock);
+		clock_map_enabled[BIT_WORD(clk->id)] &= ~BIT_MASK(clk->id);
+		spin_unlock(&clock_map_lock);
+	}
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
+int clk_reset(struct clk *clk, enum clk_reset_action action)
+{
+	if (!clk->ops->reset)
+		clk->ops->reset = &pc_clk_reset;
+	return clk->ops->reset(clk->remote_id, action);
+}
+EXPORT_SYMBOL(clk_reset);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return pc_clk_get_rate(clk->id);
+	return clk->ops->get_rate(clk->id);
 }
 EXPORT_SYMBOL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	int ret;
-	if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) {
-		ret = pc_clk_set_max_rate(clk->id, rate);
-		if (ret)
-			return ret;
-		return pc_clk_set_min_rate(clk->id, rate);
-	}
-	return pc_clk_set_rate(clk->id, rate);
+	return clk->ops->set_rate(clk->id, rate);
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->round_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_min_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->set_min_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_min_rate);
+
+int clk_set_max_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->set_max_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_max_rate);
+
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	return -ENOSYS;
@@ -173,22 +159,153 @@ int clk_set_flags(struct clk *clk, unsigned long flags)
 {
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
-	return pc_clk_set_flags(clk->id, flags);
+	return clk->ops->set_flags(clk->id, flags);
 }
 EXPORT_SYMBOL(clk_set_flags);
 
+/* EBI1 is the only shared clock that several clients want to vote on as of
+ * this commit. If this changes in the future, then it might be better to
+ * make clk_min_rate handle the voting or make ebi1_clk_set_min_rate more
+ * generic to support different clocks.
+ */
+static struct clk *ebi1_clk;
 
-void __init msm_clock_init(void)
+static void __init set_clock_ops(struct clk *clk)
+{
+	if (!clk->ops) {
+		clk->ops = &clk_ops_pcom;
+		clk->id = clk->remote_id;
+	}
+}
+
+void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks)
 {
 	unsigned n;
 
 	spin_lock_init(&clocks_lock);
 	mutex_lock(&clocks_mutex);
-	for (n = 0; n < msm_num_clocks; n++)
+	msm_clocks = clock_tbl;
+	msm_num_clocks = num_clocks;
+	for (n = 0; n < msm_num_clocks; n++) {
+		set_clock_ops(&msm_clocks[n]);
 		list_add_tail(&msm_clocks[n].list, &clocks);
+	}
 	mutex_unlock(&clocks_mutex);
+
+	ebi1_clk = clk_get(NULL, "ebi1_clk");
+	BUG_ON(ebi1_clk == NULL);
+
+}
+
+#if defined(CONFIG_DEBUG_FS)
+static struct clk *msm_clock_get_nth(unsigned index)
+{
+	if (index < msm_num_clocks)
+		return msm_clocks + index;
+	else
+		return 0;
+}
+
+static int clock_debug_rate_set(void *data, u64 val)
+{
+	struct clk *clock = data;
+	int ret;
+
+	/* Only increases to max rate will succeed, but that's actually good
+	 * for debugging purposes. So we don't check for error. */
+	if (clock->flags & CLK_MAX)
+		clk_set_max_rate(clock, val);
+	if (clock->flags & CLK_MIN)
+		ret = clk_set_min_rate(clock, val);
+	else
+		ret = clk_set_rate(clock, val);
+	if (ret != 0)
+		printk(KERN_ERR "clk_set%s_rate failed (%d)\n",
+			(clock->flags & CLK_MIN) ? "_min" : "", ret);
+	return ret;
+}
+
+static int clock_debug_rate_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+	*val = clk_get_rate(clock);
+	return 0;
+}
+
+static int clock_debug_enable_set(void *data, u64 val)
+{
+	struct clk *clock = data;
+	int rc = 0;
+
+	if (val)
+		rc = clock->ops->enable(clock->id);
+	else
+		clock->ops->disable(clock->id);
+
+	return rc;
 }
 
+static int clock_debug_enable_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+
+	*val = clock->ops->is_enabled(clock->id);
+
+	return 0;
+}
+
+static int clock_debug_local_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+
+	*val = clock->ops != &clk_ops_pcom;
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get,
+			clock_debug_rate_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get,
+			clock_debug_enable_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get,
+			NULL, "%llu\n");
+
+static int __init clock_debug_init(void)
+{
+	struct dentry *dent_rate, *dent_enable, *dent_local;
+	struct clk *clock;
+	unsigned n = 0;
+	char temp[50], *ptr;
+
+	dent_rate = debugfs_create_dir("clk_rate", 0);
+	if (IS_ERR(dent_rate))
+		return PTR_ERR(dent_rate);
+
+	dent_enable = debugfs_create_dir("clk_enable", 0);
+	if (IS_ERR(dent_enable))
+		return PTR_ERR(dent_enable);
+
+	dent_local = debugfs_create_dir("clk_local", NULL);
+	if (IS_ERR(dent_local))
+		return PTR_ERR(dent_local);
+
+	while ((clock = msm_clock_get_nth(n++)) != 0) {
+		strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1);
+		for (ptr = temp; *ptr; ptr++)
+			*ptr = tolower(*ptr);
+		debugfs_create_file(temp, 0644, dent_rate,
+				    clock, &clock_rate_fops);
+		debugfs_create_file(temp, 0644, dent_enable,
+				    clock, &clock_enable_fops);
+		debugfs_create_file(temp, S_IRUGO, dent_local,
+				    clock, &clock_local_fops);
+	}
+	return 0;
+}
+
+device_initcall(clock_debug_init);
+#endif
+
 /* The bootloader and/or AMSS may have left various clocks enabled.
  * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
  * not been explicitly enabled by a clk_enable() call.
@@ -205,7 +322,7 @@ static int __init clock_late_init(void)
 			spin_lock_irqsave(&clocks_lock, flags);
 			if (!clk->count) {
 				count++;
-				pc_clk_disable(clk->id);
+				clk->ops->auto_off(clk->id);
 			}
 			spin_unlock_irqrestore(&clocks_lock, flags);
 		}
@@ -216,3 +333,4 @@ static int __init clock_late_init(void)
 }
 
 late_initcall(clock_late_init);
+
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
index f875e15..c270b55 100644
--- a/arch/arm/mach-msm/clock.h
+++ b/arch/arm/mach-msm/clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.h
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -18,6 +18,10 @@
 #define __ARCH_ARM_MACH_MSM_CLOCK_H
 
 #include <linux/list.h>
+#include <mach/clk.h>
+
+#include "clock-pcom.h"
+#include "clock-7x30.h"
 
 #define CLKFLAG_INVERT			0x00000001
 #define CLKFLAG_NOINVERT		0x00000002
@@ -25,14 +29,32 @@
 #define CLKFLAG_NORESET			0x00000008
 
 #define CLK_FIRST_AVAILABLE_FLAG	0x00000100
-#define CLKFLAG_USE_MIN_MAX_TO_SET	0x00000200
-#define CLKFLAG_AUTO_OFF		0x00000400
+#define CLKFLAG_AUTO_OFF		0x00000200
+#define CLKFLAG_MIN			0x00000400
+#define CLKFLAG_MAX			0x00000800
+
+struct clk_ops {
+	int (*enable)(unsigned id);
+	void (*disable)(unsigned id);
+	void (*auto_off)(unsigned id);
+	int (*reset)(unsigned id, enum clk_reset_action action);
+	int (*set_rate)(unsigned id, unsigned rate);
+	int (*set_min_rate)(unsigned id, unsigned rate);
+	int (*set_max_rate)(unsigned id, unsigned rate);
+	int (*set_flags)(unsigned id, unsigned flags);
+	unsigned (*get_rate)(unsigned id);
+	unsigned (*is_enabled)(unsigned id);
+	long (*round_rate)(unsigned id, unsigned rate);
+};
 
 struct clk {
 	uint32_t id;
+	uint32_t remote_id;
 	uint32_t count;
 	uint32_t flags;
 	const char *name;
+	struct clk_ops *ops;
+	const char *dbg_name;
 	struct list_head list;
 	struct device *dev;
 };
@@ -41,8 +63,47 @@ struct clk {
 #define A11S_CLK_SEL_ADDR		(MSM_CSR_BASE + 0x104)
 #define A11S_VDD_SVS_PLEVEL_ADDR	(MSM_CSR_BASE + 0x124)
 
-extern struct clk msm_clocks[];
-extern unsigned msm_num_clocks;
+#ifdef CONFIG_DEBUG_FS
+#define CLOCK_DBG_NAME(x) .dbg_name = x,
+#else
+#define CLOCK_DBG_NAME(x)
+#endif
+
+#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	 CLOCK_DBG_NAME(#clk_id) \
+	}
+
+#define OFF CLKFLAG_AUTO_OFF
+#define CLK_MIN CLKFLAG_MIN
+#define CLK_MAX CLKFLAG_MAX
+#define CLK_MINMAX (CLK_MIN | CLK_MAX)
+#define NR_CLKS	P_NR_CLKS
+
+enum {
+	PLL_0 = 0,
+	PLL_1,
+	PLL_2,
+	PLL_3,
+	PLL_4,
+	PLL_5,
+	PLL_6,
+	NUM_PLL
+};
+
+enum clkvote_client {
+	CLKVOTE_ACPUCLK = 0,
+	CLKVOTE_PMQOS,
+	CLKVOTE_MAX,
+};
+
+int msm_clock_require_tcxo(unsigned long *reason, int nbits);
+int msm_clock_get_name(uint32_t id, char *name, uint32_t size);
+int ebi1_clk_set_min_rate(enum clkvote_client client, unsigned long rate);
+unsigned long clk_get_max_axi_khz(void);
 
 #endif
 
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
new file mode 100644
index 0000000..fde9d8f
--- /dev/null
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -0,0 +1,393 @@
+/* linux/arch/arm/mach-msm/devices.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+
+#include "clock.h"
+#include <mach/mmc.h>
+
+static struct resource resources_uart1[] = {
+	{
+		.start	= INT_UART1,
+		.end	= INT_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART1_PHYS,
+		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart1 = {
+	.name	= "msm_serial",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(resources_uart1),
+	.resource	= resources_uart1,
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+static struct resource resources_i2c[] = {
+	{
+		.start	= MSM_I2C_PHYS,
+		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_PWB_I2C,
+		.end	= INT_PWB_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_i2c = {
+	.name		= "msm_i2c",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(resources_i2c),
+	.resource	= resources_i2c,
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct flash_platform_data msm_nand_data = {
+	.parts		= NULL,
+	.nr_parts	= 0,
+};
+
+static struct resource resources_nand[] = {
+	[0] = {
+		.start	= 7,
+		.end	= 7,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_nand = {
+	.name		= "msm_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_nand),
+	.resource	= resources_nand,
+	.dev		= {
+		.platform_data	= &msm_nand_data,
+	},
+};
+
+struct platform_device msm_device_smd = {
+	.name	= "msm_smd",
+	.id	= -1,
+};
+
+static struct resource resources_sdc1[] = {
+	{
+		.start	= MSM_SDC1_PHYS,
+		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC1_0,
+		.end	= INT_SDC1_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+	{
+		.start	= INT_SDC1_1,
+		.end	= INT_SDC1_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc2[] = {
+	{
+		.start	= MSM_SDC2_PHYS,
+		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC2_0,
+		.end	= INT_SDC2_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC2_1,
+		.end	= INT_SDC2_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc3[] = {
+	{
+		.start	= MSM_SDC3_PHYS,
+		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC3_0,
+		.end	= INT_SDC3_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC3_1,
+		.end	= INT_SDC3_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc4[] = {
+	{
+		.start	= MSM_SDC4_PHYS,
+		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC4_0,
+		.end	= INT_SDC4_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC4_1,
+		.end	= INT_SDC4_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_sdc1 = {
+	.name		= "msm_sdcc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(resources_sdc1),
+	.resource	= resources_sdc1,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc2 = {
+	.name		= "msm_sdcc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(resources_sdc2),
+	.resource	= resources_sdc2,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc3 = {
+	.name		= "msm_sdcc",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(resources_sdc3),
+	.resource	= resources_sdc3,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc4 = {
+	.name		= "msm_sdcc",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(resources_sdc4),
+	.resource	= resources_sdc4,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct platform_device *msm_sdcc_devices[] __initdata = {
+	&msm_device_sdc1,
+	&msm_device_sdc2,
+	&msm_device_sdc3,
+	&msm_device_sdc4,
+};
+
+int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat,
+			unsigned int stat_irq, unsigned long stat_irq_flags)
+{
+	struct platform_device	*pdev;
+	struct resource *res;
+
+	if (controller < 1 || controller > 4)
+		return -EINVAL;
+
+	pdev = msm_sdcc_devices[controller-1];
+	pdev->dev.platform_data = plat;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
+	if (!res)
+		return -EINVAL;
+	else if (stat_irq) {
+		res->start = res->end = stat_irq;
+		res->flags &= ~IORESOURCE_DISABLED;
+		res->flags |= stat_irq_flags;
+	}
+
+	return platform_device_register(pdev);
+}
+
+struct clk msm_clocks_7x01a[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, 0),
+	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF),
+	CLK_PCOM("gp_clk",		GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, OFF),
+	CLK_PCOM("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
+	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, 0),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("pmdh_clk",	PMDH_CLK,	NULL, OFF ),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	&msm_device_sdc1.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	&msm_device_sdc2.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	&msm_device_sdc3.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	&msm_device_sdc4.dev, OFF),
+	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
+	CLK_PCOM("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLK_PCOM("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLK_PCOM("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
+	CLK_PCOM("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
+	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
+	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	&msm_device_hsusb.dev, OFF),
+	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF ),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+};
+
+unsigned msm_num_clocks_7x01a = ARRAY_SIZE(msm_clocks_7x01a);
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
new file mode 100644
index 0000000..b449e8a
--- /dev/null
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/dma-mapping.h>
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "devices.h"
+#include "smd_private.h"
+
+#include <asm/mach/flash.h>
+
+#include "clock-pcom.h"
+
+#include <mach/mmc.h>
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct clk msm_clocks_7x30[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLK_PCOM("cam_m_clk",	CAM_M_CLK,	NULL, 0),
+	CLK_PCOM("camif_pad_pclk",	CAMIF_PAD_P_CLK,	NULL, OFF),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("emdh_pclk",	EMDH_P_CLK,	NULL, OFF),
+	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_2d_clk",	GRP_2D_CLK,	NULL, 0),
+	CLK_PCOM("grp_2d_pclk",	GRP_2D_P_CLK,	NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("grp_pclk",	GRP_3D_P_CLK,	NULL, 0),
+	CLK_7X30S("grp_src_clk", GRP_3D_SRC_CLK, GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("hdmi_clk",	HDMI_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("jpeg_clk",	JPEG_CLK,	NULL, OFF),
+	CLK_PCOM("jpeg_pclk",	JPEG_P_CLK,	NULL, OFF),
+	CLK_PCOM("lpa_codec_clk",	LPA_CODEC_CLK,		NULL, 0),
+	CLK_PCOM("lpa_core_clk",	LPA_CORE_CLK,		NULL, 0),
+	CLK_PCOM("lpa_pclk",		LPA_P_CLK,		NULL, 0),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("mddi_pclk",	PMDH_P_CLK,	NULL, 0),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("mdp_pclk",	MDP_P_CLK,	NULL, 0),
+	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,  NULL, 0),
+	CLK_PCOM("mfc_clk",		MFC_CLK,		NULL, 0),
+	CLK_PCOM("mfc_div2_clk",	MFC_DIV2_CLK,		NULL, 0),
+	CLK_PCOM("mfc_pclk",		MFC_P_CLK,		NULL, 0),
+	CLK_PCOM("mi2s_m_clk",		MI2S_M_CLK,  		NULL, 0),
+	CLK_PCOM("mi2s_s_clk",		MI2S_S_CLK,  		NULL, 0),
+	CLK_PCOM("mi2s_codec_rx_m_clk",	MI2S_CODEC_RX_M_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_rx_s_clk",	MI2S_CODEC_RX_S_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_tx_m_clk",	MI2S_CODEC_TX_M_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_tx_s_clk",	MI2S_CODEC_TX_S_CLK,  NULL, 0),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("rotator_clk",	AXI_ROTATOR_CLK,		NULL, 0),
+	CLK_PCOM("rotator_imem_clk",	ROTATOR_IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("rotator_pclk",	ROTATOR_P_CLK,		NULL, OFF),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
+	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
+	CLK_7X30S("tv_src_clk",	TV_CLK, 	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs_core_clk",	USB_HS_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_clk",		USB_HS2_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs2_core_clk",	USB_HS2_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_clk",		USB_HS3_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs3_core_clk",	USB_HS3_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
+	CLK_PCOM("vfe_camif_clk",	VFE_CAMIF_CLK, 	NULL, 0),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, 0),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, 0),
+	CLK_PCOM("vfe_pclk",	VFE_P_CLK,	NULL, OFF),
+	CLK_PCOM("vpe_clk",	VPE_CLK,	NULL, 0),
+
+	/* 7x30 v2 hardware only. */
+	CLK_PCOM("csi_clk",	CSI0_CLK,	NULL, 0),
+	CLK_PCOM("csi_pclk",	CSI0_P_CLK,	NULL, 0),
+	CLK_PCOM("csi_vfe_clk",	CSI0_VFE_CLK,	NULL, 0),
+};
+
+unsigned msm_num_clocks_7x30 = ARRAY_SIZE(msm_clocks_7x30);
+
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
new file mode 100644
index 0000000..4d4a507
--- /dev/null
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/dma-mapping.h>
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+
+#include <mach/mmc.h>
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+struct clk msm_clocks_8x50[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,	NULL, 0),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
+	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_axi_clk",	VFE_AXI_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_clk",	USB_HS2_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_clk",	USB_HS3_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
+};
+
+unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50);
+
diff --git a/arch/arm/mach-msm/devices.c b/arch/arm/mach-msm/devices.c
deleted file mode 100644
index 31b6b30..0000000
--- a/arch/arm/mach-msm/devices.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.c
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct resource resources_uart1[] = {
-	{
-		.start	= INT_UART1,
-		.end	= INT_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART1_PHYS,
-		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm_device_uart1 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart1),
-	.resource	= resources_uart1,
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-static struct resource resources_i2c[] = {
-	{
-		.start	= MSM_I2C_PHYS,
-		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_i2c = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(resources_i2c),
-	.resource	= resources_i2c,
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= NULL,
-	.nr_parts	= 0,
-};
-
-static struct resource resources_nand[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_nand = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_nand),
-	.resource	= resources_nand,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-struct platform_device msm_device_smd = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
index 0744c4a..568443e 100644
--- a/arch/arm/mach-msm/devices.h
+++ b/arch/arm/mach-msm/devices.h
@@ -16,6 +16,8 @@
 #ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
 #define __ARCH_ARM_MACH_MSM_DEVICES_H
 
+#include "clock.h"
+
 extern struct platform_device msm_device_uart1;
 extern struct platform_device msm_device_uart2;
 extern struct platform_device msm_device_uart3;
@@ -33,4 +35,13 @@ extern struct platform_device msm_device_smd;
 
 extern struct platform_device msm_device_nand;
 
+extern struct clk msm_clocks_7x01a[];
+extern unsigned msm_num_clocks_7x01a;
+
+extern struct clk msm_clocks_7x30[];
+extern unsigned msm_num_clocks_7x30;
+
+extern struct clk msm_clocks_8x50[];
+extern unsigned msm_num_clocks_8x50;
+
 #endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index f5420f9..02cae5e 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -13,8 +13,11 @@
  *
  */
 
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/completion.h>
 #include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
@@ -26,6 +29,7 @@ enum {
 };
 
 static DEFINE_SPINLOCK(msm_dmov_lock);
+static struct clk *msm_dmov_clk;
 static unsigned int channel_active;
 static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
 static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
@@ -54,6 +58,9 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 	unsigned int status;
 
 	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+	if (!channel_active)
+		clk_enable(msm_dmov_clk);
+	dsb();
 	status = readl(DMOV_STATUS(id));
 	if (list_empty(&ready_commands[id]) &&
 		(status & DMOV_STATUS_CMD_PTR_RDY)) {
@@ -63,6 +70,8 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 			writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
 		}
 #endif
+		if (cmd->execute_func)
+			cmd->execute_func(cmd);
 		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
 		list_add_tail(&cmd->list, &active_commands[id]);
 		if (!channel_active)
@@ -70,6 +79,8 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 		channel_active |= 1U << id;
 		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 	} else {
+		if (!channel_active)
+			clk_disable(msm_dmov_clk);
 		if (list_empty(&active_commands[id]))
 			PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
 
@@ -108,6 +119,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
 
 	cmd.dmov_cmd.cmdptr = cmdptr;
 	cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
+	cmd.dmov_cmd.execute_func = NULL;
 	cmd.id = id;
 	init_completion(&cmd.complete);
 
@@ -165,6 +177,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 					"for %p, result %x\n", id, cmd, ch_result);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, NULL);
 				}
 			}
@@ -181,6 +194,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 			}
@@ -198,6 +212,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 				/* this does not seem to work, once we get an error */
@@ -210,6 +225,8 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
 				list_del(&cmd->list);
 				list_add_tail(&cmd->list, &active_commands[id]);
+				if (cmd->execute_func)
+					cmd->execute_func(cmd);
 				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
 				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 			}
@@ -219,8 +236,10 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
 		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 	}
 
-	if (!channel_active)
-		disable_irq(INT_ADM_AARM);
+	if (!channel_active) {
+		disable_irq_nosync(INT_ADM_AARM);
+		clk_disable(msm_dmov_clk);
+	}
 
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 	return IRQ_HANDLED;
@@ -230,11 +249,17 @@ static int __init msm_init_datamover(void)
 {
 	int i;
 	int ret;
+	struct clk *clk;
+
 	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
 		INIT_LIST_HEAD(&ready_commands[i]);
 		INIT_LIST_HEAD(&active_commands[i]);
 		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
 	}
+	clk = clk_get(NULL, "adm_clk");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	msm_dmov_clk = clk;
 	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
 	if (ret)
 		return ret;
diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
new file mode 100644
index 0000000..bc32c84
--- /dev/null
+++ b/arch/arm/mach-msm/gpio.c
@@ -0,0 +1,85 @@
+/* linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <mach/gpio.h>
+#include "proc_comm.h"
+
+int gpio_tlmm_config(unsigned config, unsigned disable)
+{
+	return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable);
+}
+EXPORT_SYMBOL(gpio_tlmm_config);
+
+int msm_gpios_enable(const struct msm_gpio *table, int size)
+{
+	int rc;
+	int i;
+	const struct msm_gpio *g;
+	for (i = 0; i < size; i++) {
+		g = table + i;
+		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
+		if (rc) {
+			pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)"
+			       " <%s> failed: %d\n",
+			       g->gpio_cfg, g->label ?: "?", rc);
+			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
+			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
+			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
+			       GPIO_DRVSTR(g->gpio_cfg));
+			goto err;
+		}
+	}
+	return 0;
+err:
+	msm_gpios_disable(table, i);
+	return rc;
+}
+EXPORT_SYMBOL(msm_gpios_enable);
+
+void msm_gpios_disable(const struct msm_gpio *table, int size)
+{
+	int rc;
+	int i;
+	const struct msm_gpio *g;
+	for (i = size-1; i >= 0; i--) {
+		g = table + i;
+		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE);
+		if (rc) {
+			pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)"
+			       " <%s> failed: %d\n",
+			       g->gpio_cfg, g->label ?: "?", rc);
+			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
+			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
+			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
+			       GPIO_DRVSTR(g->gpio_cfg));
+		}
+	}
+}
+EXPORT_SYMBOL(msm_gpios_disable);
+
+int msm_gpios_request_enable(const struct msm_gpio *table, int size)
+{
+	int rc = msm_gpios_enable(table, size);
+	return rc;
+}
+EXPORT_SYMBOL(msm_gpios_request_enable);
+
+void msm_gpios_disable_free(const struct msm_gpio *table, int size)
+{
+	msm_gpios_disable(table, size);
+}
+EXPORT_SYMBOL(msm_gpios_disable_free);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 264d62e..e302fbd 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -21,18 +21,24 @@
 
 /* platform device data structures */
 
-struct msm_mddi_platform_data
+struct msm_acpu_clock_platform_data
 {
-	void (*panel_power)(int on);
-	unsigned has_vsync_irq:1;
+	uint32_t acpu_switch_time_us;
+	uint32_t max_speed_delta_khz;
+	uint32_t vdd_switch_time_us;
+	unsigned long power_collapse_khz;
+	unsigned long wait_for_irq_khz;
 };
 
+struct clk;
+
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
 void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
-void __init msm_clock_init(void);
+void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks);
+void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h
new file mode 100644
index 0000000..c05ca40
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/clk.h
@@ -0,0 +1,57 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __MACH_CLK_H
+#define __MACH_CLK_H
+
+/* Magic rate value for use with PM QOS to request the board's maximum
+ * supported AXI rate. PM QOS will only pass positive s32 rate values
+ * through to the clock driver, so INT_MAX is used.
+ */
+#define MSM_AXI_MAX_FREQ	LONG_MAX
+
+enum clk_reset_action {
+	CLK_RESET_DEASSERT	= 0,
+	CLK_RESET_ASSERT	= 1
+};
+
+struct clk;
+
+/* Rate is minimum clock rate in Hz */
+int clk_set_min_rate(struct clk *clk, unsigned long rate);
+
+/* Rate is maximum clock rate in Hz */
+int clk_set_max_rate(struct clk *clk, unsigned long rate);
+
+/* Assert/Deassert reset to a hardware block associated with a clock */
+int clk_reset(struct clk *clk, enum clk_reset_action action);
+
+/* Set clock-specific configuration parameters */
+int clk_set_flags(struct clk *clk, unsigned long flags);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index d48747e..528750f 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #ifdef CONFIG_MSM_DEBUG_UART
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	@ see if the MMU is enabled and select appropriate base address
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
@@ -40,7 +40,7 @@
 	beq	1001b
 	.endm
 #else
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index 5ab5bdf..00f9bbf 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -28,6 +28,8 @@ struct msm_dmov_cmd {
 	void (*complete_func)(struct msm_dmov_cmd *cmd,
 			      unsigned int result,
 			      struct msm_dmov_errdata *err);
+	void (*execute_func)(struct msm_dmov_cmd *cmd);
+	void *data;
 };
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
@@ -41,40 +43,42 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
 #define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
 #define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
 
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
+#if defined(CONFIG_ARCH_MSM7X30)
+#define DMOV_SD_AARM DMOV_SD2
+#else
+#define DMOV_SD_AARM DMOV_SD3
+#endif
 
-#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_PTR(ch)      DMOV_SD_AARM(0x000, ch)
 #define DMOV_CMD_LIST         (0 << 29) /* does not work */
 #define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
 #define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
 #define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
 #define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
 
-#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT(ch)         DMOV_SD_AARM(0x040, ch)
 #define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
 #define DMOV_RSLT_ERROR       (1 << 3)
 #define DMOV_RSLT_FLUSH       (1 << 2)
 #define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
 #define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
 
-#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+#define DMOV_FLUSH0(ch)       DMOV_SD_AARM(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD_AARM(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD_AARM(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD_AARM(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD_AARM(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD_AARM(0x1C0, ch)
 
-#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS(ch)       DMOV_SD_AARM(0x200, ch)
 #define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
 #define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
 #define DMOV_STATUS_RSLT_VALID       (1 << 1)
 #define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
 
-#define DMOV_ISR              DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_ISR              DMOV_SD_AARM(0x380, 0)
+  
+#define DMOV_CONFIG(ch)       DMOV_SD_AARM(0x300, ch)
 #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
 #define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
 #define DMOV_CONFIG_IRQ_EN             (1 << 0)
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
new file mode 100644
index 0000000..262b441
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ASM_ARCH_MSM_GPIO_H
+#define __ASM_ARCH_MSM_GPIO_H
+
+/**
+ * struct msm_gpio - GPIO pin description
+ * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
+ * @label - textual label
+ *
+ * Usually, GPIO's are operated by sets.
+ * This struct accumulate all GPIO information in single source
+ * and facilitete group operations provided by msm_gpios_xxx()
+ */
+struct msm_gpio {
+	u32 gpio_cfg;
+	const char *label;
+};
+
+/**
+ * msm_gpios_request_enable() - request and enable set of GPIOs
+ *
+ * Request and configure set of GPIO's
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_request_enable(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_disable_free() - disable and free set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_disable_free(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_request() - request set of GPIOs
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_request(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_free() - free set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_free(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_enable() - enable set of GPIOs
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_enable(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_disable() - disable set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_disable(const struct msm_gpio *table, int size);
+
+/* GPIO TLMM (Top Level Multiplexing) Definitions */
+
+/* GPIO TLMM: Function -- GPIO specific */
+
+/* GPIO TLMM: Direction */
+enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+};
+
+/* GPIO TLMM: Pullup/Pulldown */
+enum {
+	GPIO_NO_PULL,
+	GPIO_PULL_DOWN,
+	GPIO_KEEPER,
+	GPIO_PULL_UP,
+};
+
+/* GPIO TLMM: Drive Strength */
+enum {
+	GPIO_2MA,
+	GPIO_4MA,
+	GPIO_6MA,
+	GPIO_8MA,
+	GPIO_10MA,
+	GPIO_12MA,
+	GPIO_14MA,
+	GPIO_16MA,
+};
+
+enum {
+	GPIO_ENABLE,
+	GPIO_DISABLE,
+};
+
+#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
+	((((gpio) & 0x3FF) << 4)        |	  \
+	 ((func) & 0xf)                  |	  \
+	 (((dir) & 0x1) << 14)           |	  \
+	 (((pull) & 0x3) << 15)          |	  \
+	 (((drvstr) & 0xF) << 17))
+
+/**
+ * extract GPIO pin from bit-field used for gpio_tlmm_config
+ */
+#define GPIO_PIN(gpio_cfg)    (((gpio_cfg) >>  4) & 0x3ff)
+#define GPIO_FUNC(gpio_cfg)   (((gpio_cfg) >>  0) & 0xf)
+#define GPIO_DIR(gpio_cfg)    (((gpio_cfg) >> 14) & 0x1)
+#define GPIO_PULL(gpio_cfg)   (((gpio_cfg) >> 15) & 0x3)
+#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
+
+int gpio_tlmm_config(unsigned config, unsigned disable);
+
+#endif /* __ASM_ARCH_MSM_GPIO_H */
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
index aab9645..c35b29f 100644
--- a/arch/arm/mach-msm/include/mach/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -26,4 +26,9 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m
 #define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)    (a)
 
+void msm_map_qsd8x50_io(void);
+void msm_map_msm7x30_io(void);
+
+extern unsigned int msm_shared_ram_phys;
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h
new file mode 100644
index 0000000..f1fe706
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-7x00.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
+#define __ASM_ARCH_MSM_IRQS_7X00_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h
new file mode 100644
index 0000000..67c5396
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-7x30.h
@@ -0,0 +1,170 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
+#define __ASM_ARCH_MSM_IRQS_7X30_H
+
+/* MSM ACPU Interrupt Numbers */
+
+#define INT_DEBUG_TIMER_EXP	0
+#define INT_GPT0_TIMER_EXP	1
+#define INT_GPT1_TIMER_EXP	2
+#define INT_WDT0_ACCSCSSBARK	3
+#define INT_WDT1_ACCSCSSBARK	4
+#define INT_AVS_SVIC		5
+#define INT_AVS_SVIC_SW_DONE	6
+#define INT_SC_DBG_RX_FULL	7
+#define INT_SC_DBG_TX_EMPTY	8
+#define INT_ARM11_PM		9
+#define INT_AVS_REQ_DOWN	10
+#define INT_AVS_REQ_UP		11
+#define INT_SC_ACG		12
+/* SCSS_VICFIQSTS0[13:15] are RESERVED */
+#define INT_L2_SVICCPUIRPTREQ	16
+#define INT_L2_SVICDMANSIRPTREQ 17
+#define INT_L2_SVICDMASIRPTREQ  18
+#define INT_L2_SVICSLVIRPTREQ	19
+#define INT_AD5A_MPROC_APPS_0	20
+#define INT_AD5A_MPROC_APPS_1	21
+#define INT_A9_M2A_0		22
+#define INT_A9_M2A_1		23
+#define INT_A9_M2A_2		24
+#define INT_A9_M2A_3		25
+#define INT_A9_M2A_4		26
+#define INT_A9_M2A_5		27
+#define INT_A9_M2A_6		28
+#define INT_A9_M2A_7		29
+#define INT_A9_M2A_8		30
+#define INT_A9_M2A_9		31
+
+#define INT_AXI_EBI1_SC		(32 + 0)
+#define INT_IMEM_ERR		(32 + 1)
+#define INT_AXI_EBI0_SC		(32 + 2)
+#define INT_PBUS_SC_IRQC	(32 + 3)
+#define INT_PERPH_BUS_BPM	(32 + 4)
+#define INT_CC_TEMP_SENSE	(32 + 5)
+#define INT_UXMC_EBI0		(32 + 6)
+#define INT_UXMC_EBI1		(32 + 7)
+#define INT_EBI2_OP_DONE	(32 + 8)
+#define INT_EBI2_WR_ER_DONE	(32 + 9)
+#define INT_TCSR_SPSS_CE	(32 + 10)
+#define INT_EMDH		(32 + 11)
+#define INT_PMDH		(32 + 12)
+#define INT_MDC			(32 + 13)
+#define INT_MIDI_TO_SUPSS	(32 + 14)
+#define INT_LPA_2		(32 + 15)
+#define INT_GPIO_GROUP1_SECURE	(32 + 16)
+#define INT_GPIO_GROUP2_SECURE	(32 + 17)
+#define INT_GPIO_GROUP1		(32 + 18)
+#define INT_GPIO_GROUP2		(32 + 19)
+#define INT_MPRPH_SOFTRESET	(32 + 20)
+#define INT_PWB_I2C		(32 + 21)
+#define INT_PWB_I2C_2		(32 + 22)
+#define INT_TSSC_SAMPLE		(32 + 23)
+#define INT_TSSC_PENUP		(32 + 24)
+#define INT_TCHSCRN_SSBI	(32 + 25)
+#define INT_FM_RDS		(32 + 26)
+#define INT_KEYSENSE 		(32 + 27)
+#define INT_USB_OTG_HS		(32 + 28)
+#define INT_USB_OTG_HS2		(32 + 29)
+#define INT_USB_OTG_HS3		(32 + 30)
+#define INT_CSI			(32 + 31)
+
+#define INT_SPI_OUTPUT		(64 + 0)
+#define INT_SPI_INPUT		(64 + 1)
+#define INT_SPI_ERROR		(64 + 2)
+#define INT_UART1		(64 + 3)
+#define INT_UART1_RX		(64 + 4)
+#define INT_UART2		(64 + 5)
+#define INT_UART2_RX		(64 + 6)
+#define INT_UART3		(64 + 7)
+#define INT_UART3_RX		(64 + 8)
+#define INT_UART1DM_IRQ		(64 + 9)
+#define INT_UART1DM_RX		(64 + 10)
+#define INT_UART2DM_IRQ		(64 + 11)
+#define INT_UART2DM_RX		(64 + 12)
+#define INT_TSIF		(64 + 13)
+#define INT_ADM_SC1		(64 + 14)
+#define INT_ADM_SC2		(64 + 15)
+#define INT_MDP			(64 + 16)
+#define INT_VPE			(64 + 17)
+#define INT_GRP_2D		(64 + 18)
+#define INT_GRP_3D		(64 + 19)
+#define INT_ROTATOR		(64 + 20)
+#define INT_MFC720		(64 + 21)
+#define INT_JPEG		(64 + 22)
+#define INT_VFE			(64 + 23)
+#define INT_TV_ENC		(64 + 24)
+#define INT_PMIC_SSBI		(64 + 25)
+#define INT_MPM_1		(64 + 26)
+#define INT_TCSR_SPSS_SAMPLE	(64 + 27)
+#define INT_TCSR_SPSS_PENUP	(64 + 28)
+#define INT_MPM_2		(64 + 29)
+#define INT_SDC1_0		(64 + 30)
+#define INT_SDC1_1		(64 + 31)
+
+#define INT_SDC3_0		(96 + 0)
+#define INT_SDC3_1		(96 + 1)
+#define INT_SDC2_0		(96 + 2)
+#define INT_SDC2_1		(96 + 3)
+#define INT_SDC4_0		(96 + 4)
+#define INT_SDC4_1		(96 + 5)
+#define INT_PWB_QUP_IN		(96 + 6)
+#define INT_PWB_QUP_OUT		(96 + 7)
+#define INT_PWB_QUP_ERR		(96 + 8)
+#define INT_SCSS_WDT0_BITE	(96 + 9)
+/* SCSS_VICFIQSTS3[10:31] are RESERVED */
+
+/* Retrofit universal macro names */
+#define INT_ADM_AARM		INT_ADM_SC2
+#define INT_USB_HS   		INT_USB_OTG_HS
+#define INT_USB_OTG   		INT_USB_OTG_HS
+#define INT_TCHSCRN1 		INT_TSSC_SAMPLE
+#define INT_TCHSCRN2 		INT_TSSC_PENUP
+#define INT_GP_TIMER_EXP 	INT_GPT0_TIMER_EXP
+#define INT_ADSP_A11 		INT_AD5A_MPROC_APPS_0
+#define INT_ADSP_A9_A11 	INT_AD5A_MPROC_APPS_1
+#define INT_MDDI_EXT		INT_EMDH
+#define INT_MDDI_PRI		INT_PMDH
+#define INT_MDDI_CLIENT		INT_MDC
+#define INT_NAND_WR_ER_DONE	INT_EBI2_WR_ER_DONE
+#define INT_NAND_OP_DONE	INT_EBI2_OP_DONE
+
+#define NR_MSM_IRQS		128
+#define NR_GPIO_IRQS		182
+#define PMIC8058_IRQ_BASE	(NR_MSM_IRQS + NR_GPIO_IRQS)
+#define NR_PMIC8058_GPIO_IRQS	40
+#define NR_PMIC8058_MPP_IRQS	12
+#define NR_PMIC8058_MISC_IRQS	8
+#define NR_PMIC8058_IRQS	(NR_PMIC8058_GPIO_IRQS +\
+				NR_PMIC8058_MPP_IRQS +\
+				NR_PMIC8058_MISC_IRQS)
+#define NR_BOARD_IRQS		NR_PMIC8058_IRQS
+
+#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h
new file mode 100644
index 0000000..de3d8fe
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-8x50.h
@@ -0,0 +1,105 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
+#define __ASM_ARCH_MSM_IRQS_8XXX_H
+
+/* MSM ACPU Interrupt Numbers */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_SIRC_0           9
+#define INT_SDC3_0           10
+#define INT_SDC3_1           11
+#define INT_SDC4_0           12
+#define INT_SDC4_1           13
+#define INT_AD6_EXT_VFR      14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_TCSR_MPRPH_SC1   (32 + 0)
+#define INT_USB_FS2          (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_TCSR_MPRPH_SC2   (32 + 6)
+#define INT_OP_PEN           (32 + 7)
+#define INT_AD_HSSD          (32 + 8)
+#define INT_ARM11_PM         (32 + 9)
+#define INT_SDMA_NON_SECURE  (32 + 10)
+#define INT_TSIF_IRQ         (32 + 11)
+#define INT_UART1DM_IRQ      (32 + 12)
+#define INT_UART1DM_RX       (32 + 13)
+#define INT_SDMA_SECURE      (32 + 14)
+#define INT_SI2S_SLAVE       (32 + 15)
+#define INT_SC_I2CPU         (32 + 16)
+#define INT_SC_DBG_RDTRFULL  (32 + 17)
+#define INT_SC_DBG_WDTRFULL  (32 + 18)
+#define INT_SCPLL_CTL_DONE   (32 + 19)
+#define INT_UART2DM_IRQ      (32 + 20)
+#define INT_UART2DM_RX       (32 + 21)
+#define INT_VDC_MEC          (32 + 22)
+#define INT_VDC_DB           (32 + 23)
+#define INT_VDC_AXI          (32 + 24)
+#define INT_VFE              (32 + 25)
+#define INT_USB_HS           (32 + 26)
+#define INT_AUDIO_OUT0       (32 + 27)
+#define INT_AUDIO_OUT1       (32 + 28)
+#define INT_CRYPTO           (32 + 29)
+#define INT_AD6M_IDLE        (32 + 30)
+#define INT_SIRC_1           (32 + 31)
+
+#define NR_GPIO_IRQS 165
+#define NR_MSM_IRQS 64
+#define NR_BOARD_IRQS 64
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 9dd4cf8..164d355 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/irqs.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -17,74 +17,21 @@
 #ifndef __ASM_ARCH_MSM_IRQS_H
 #define __ASM_ARCH_MSM_IRQS_H
 
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
 #define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
 
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+#if defined(CONFIG_ARCH_MSM7X30)
+#include "irqs-7x30.h"
+#elif defined(CONFIG_ARCH_QSD8X50)
+#include "irqs-8x50.h"
+#include "sirc.h"
+#elif defined(CONFIG_ARCH_MSM_ARM11)
+#include "irqs-7x00.h"
+#else
+#error "Unknown architecture specification"
+#endif
 
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
 #define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index f4698ba..50c7847 100644
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -17,7 +17,15 @@
 #define __ASM_ARCH_MEMORY_H
 
 /* physical offset of RAM */
+#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
+#define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define PHYS_OFFSET		UL(0x20000000)
+#elif defined(CONFIG_ARCH_MSM7X30)
+#define PHYS_OFFSET		UL(0x00200000)
+#else
 #define PHYS_OFFSET		UL(0x10000000)
+#endif
 
 #endif
 
diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h
new file mode 100644
index 0000000..1f4fc81
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_fb.h
@@ -0,0 +1,147 @@
+/* arch/arm/mach-msm/include/mach/msm_fb.h
+ *
+ * Internal shared definitions for various MSM framebuffer parts.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MSM_FB_H_
+#define _MSM_FB_H_
+
+#include <linux/device.h>
+
+struct mddi_info;
+
+struct msm_fb_data {
+	int xres;	/* x resolution in pixels */
+	int yres;	/* y resolution in pixels */
+	int width;	/* disply width in mm */
+	int height;	/* display height in mm */
+	unsigned output_format;
+};
+
+struct msmfb_callback {
+	void (*func)(struct msmfb_callback *);
+};
+
+enum {
+	MSM_MDDI_PMDH_INTERFACE,
+	MSM_MDDI_EMDH_INTERFACE,
+	MSM_EBI2_INTERFACE,
+};
+
+#define MSMFB_CAP_PARTIAL_UPDATES	(1 << 0)
+
+struct msm_panel_data {
+	/* turns off the fb memory */
+	int (*suspend)(struct msm_panel_data *);
+	/* turns on the fb memory */
+	int (*resume)(struct msm_panel_data *);
+	/* turns off the panel */
+	int (*blank)(struct msm_panel_data *);
+	/* turns on the panel */
+	int (*unblank)(struct msm_panel_data *);
+	void (*wait_vsync)(struct msm_panel_data *);
+	void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
+	void (*clear_vsync)(struct msm_panel_data *);
+	/* from the enum above */
+	unsigned interface_type;
+	/* data to be passed to the fb driver */
+	struct msm_fb_data *fb_data;
+
+	/* capabilities supported by the panel */
+	uint32_t caps;
+};
+
+struct msm_mddi_client_data {
+	void (*suspend)(struct msm_mddi_client_data *);
+	void (*resume)(struct msm_mddi_client_data *);
+	void (*activate_link)(struct msm_mddi_client_data *);
+	void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
+			     uint32_t reg);
+	uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
+	void (*auto_hibernate)(struct msm_mddi_client_data *, int);
+	/* custom data that needs to be passed from the board file to a 
+	 * particular client */
+	void *private_client_data;
+	struct resource *fb_resource;
+	/* from the list above */
+	unsigned interface_type;
+};
+
+struct msm_mddi_platform_data {
+	unsigned int clk_rate;
+	void (*power_client)(struct msm_mddi_client_data *, int on);
+
+	/* fixup the mfr name, product id */
+	void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
+
+	struct resource *fb_resource; /*optional*/
+	/* number of clients in the list that follows */
+	int num_clients;
+	/* array of client information of clients */
+	struct {
+		unsigned product_id; /* mfr id in top 16 bits, product id
+				      * in lower 16 bits
+				      */
+		char *name;	/* the device name will be the platform
+				 * device name registered for the client,
+				 * it should match the name of the associated
+				 * driver
+				 */
+		unsigned id;	/* id for mddi client device node, will also
+				 * be used as device id of panel devices, if
+				 * the client device will have multiple panels
+				 * space must be left here for them
+				 */
+		void *client_data;	/* required private client data */
+		unsigned int clk_rate;	/* optional: if the client requires a
+					* different mddi clk rate
+					*/
+	} client_platform_data[];
+};
+
+struct mdp_blit_req;
+struct fb_info;
+struct mdp_device {
+	struct device dev;
+	void (*dma)(struct mdp_device *mpd, uint32_t addr,
+		    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
+		    uint32_t y, struct msmfb_callback *callback, int interface);
+	void (*dma_wait)(struct mdp_device *mdp);
+	int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
+		    struct mdp_blit_req *req);
+	void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
+};
+
+struct class_interface;
+int register_mdp_client(struct class_interface *class_intf);
+
+/**** private client data structs go below this line ***/
+
+struct msm_mddi_bridge_platform_data {
+	/* from board file */
+	int (*init)(struct msm_mddi_bridge_platform_data *,
+		    struct msm_mddi_client_data *);
+	int (*uninit)(struct msm_mddi_bridge_platform_data *,
+		      struct msm_mddi_client_data *);
+	/* passed to panel for use by the fb driver */
+	int (*blank)(struct msm_mddi_bridge_platform_data *,
+		     struct msm_mddi_client_data *);
+	int (*unblank)(struct msm_mddi_bridge_platform_data *,
+		       struct msm_mddi_client_data *);
+	struct msm_fb_data fb_data;
+};
+
+
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
new file mode 100644
index 0000000..cfff0e7
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
+#define __ASM_ARCH_MSM_IOMAP_7X00_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x)	x
+#else
+#define IOMEM(x)	((void __force __iomem *)(x))
+#endif
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xC0000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_GPT_PHYS          MSM_CSR_PHYS
+#define MSM_GPT_BASE          MSM_CSR_BASE
+#define MSM_GPT_SIZE          SZ_4K
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_SDC1_PHYS         0xA0400000
+#define MSM_SDC1_SIZE         SZ_4K
+
+#define MSM_SDC2_PHYS         0xA0500000
+#define MSM_SDC2_SIZE         SZ_4K
+
+#define MSM_SDC3_PHYS         0xA0600000
+#define MSM_SDC3_SIZE         SZ_4K
+
+#define MSM_SDC4_PHYS         0xA0700000
+#define MSM_SDC4_SIZE         SZ_4K
+
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
+#define MSM_PMDH_PHYS         0xAA600000
+#define MSM_PMDH_SIZE         SZ_4K
+
+#define MSM_EMDH_PHYS         0xAA700000
+#define MSM_EMDH_SIZE         SZ_4K
+
+#define MSM_MDP_PHYS          0xAA200000
+#define MSM_MDP_SIZE          0x000F0000
+
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define MSM_GCC_BASE          IOMEM(0xF8009000)
+#define MSM_GCC_PHYS          0xC0182000
+#define MSM_GCC_SIZE          SZ_4K
+#endif
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
new file mode 100644
index 0000000..8a00c2d
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
+#define __ASM_ARCH_MSM_IOMAP_7X30_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xC0080000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_TMR_PHYS          MSM_CSR_PHYS
+#define MSM_TMR_BASE          MSM_CSR_BASE
+#define MSM_TMR_SIZE          SZ_4K
+
+#define MSM_GPT_BASE 	      (MSM_TMR_BASE + 0x4)
+#define MSM_DGT_BASE 	      (MSM_TMR_BASE + 0x24)
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xAC400000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xAC001000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xAC101000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xAB800000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_CLK_CTL_SH2_BASE  IOMEM(0xE0006000)
+#define MSM_CLK_CTL_SH2_PHYS  0xABA01000
+#define MSM_CLK_CTL_SH2_SIZE  SZ_4K
+
+#define MSM_ACC_BASE          IOMEM(0xE0007000)
+#define MSM_ACC_PHYS          0xC0101000
+#define MSM_ACC_SIZE          SZ_4K
+
+#define MSM_SAW_BASE          IOMEM(0xE0008000)
+#define MSM_SAW_PHYS          0xC0102000
+#define MSM_SAW_SIZE          SZ_4K
+
+#define MSM_GCC_BASE	      IOMEM(0xE0009000)
+#define MSM_GCC_PHYS	      0xC0182000
+#define MSM_GCC_SIZE	      SZ_4K
+
+#define MSM_TCSR_BASE	      IOMEM(0xE000A000)
+#define MSM_TCSR_PHYS	      0xAB600000
+#define MSM_TCSR_SIZE	      SZ_4K
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x00100000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xACA00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xACB00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xACC00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_MDC_BASE	      IOMEM(0xE0200000)
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_BASE          IOMEM(0xE0300000)
+#define MSM_AD5_PHYS          0xA7000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
new file mode 100644
index 0000000..acc819e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
+#define __ASM_ARCH_MSM_IOMAP_8X50_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xAC000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xAC100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_TMR_PHYS          MSM_CSR_PHYS
+#define MSM_TMR_BASE          MSM_CSR_BASE
+#define MSM_TMR_SIZE          SZ_4K
+
+#define MSM_GPT_BASE          MSM_TMR_BASE
+#define MSM_DGT_BASE          (MSM_TMR_BASE + 0x10)
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xA9000000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xA9100000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_SIRC_BASE         IOMEM(0xE1006000)
+#define MSM_SIRC_PHYS         0xAC200000
+#define MSM_SIRC_SIZE         SZ_4K
+
+#define MSM_SCPLL_BASE        IOMEM(0xE1007000)
+#define MSM_SCPLL_PHYS        0xA8800000
+#define MSM_SCPLL_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_MDC_BASE	      IOMEM(0xE0200000)
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_BASE          IOMEM(0xE0300000)
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+
+#define MSM_I2C_SIZE          SZ_4K
+#define MSM_I2C_PHYS          0xA9900000
+
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_1K
+
+#define MSM_NAND_PHYS           0xA0A00000
+
+
+#define MSM_TSIF_PHYS        (0xa0100000)
+#define MSM_TSIF_SIZE        (0x200)
+
+#define MSM_TSSC_PHYS         0xAA300000
+
+#define MSM_UART1DM_PHYS      0xA0200000
+#define MSM_UART2DM_PHYS      0xA0900000
+
+
+#define MSM_SDC1_PHYS          0xA0400000
+#define MSM_SDC1_SIZE          SZ_4K
+
+#define MSM_SDC2_PHYS          0xA0500000
+#define MSM_SDC2_SIZE          SZ_4K
+
+#define MSM_SDC3_PHYS          0xA0600000
+#define MSM_SDC3_SIZE           SZ_4K
+
+#define MSM_SDC4_PHYS          0xA0700000
+#define MSM_SDC4_SIZE          SZ_4K
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 9dae1a9..e6b1821 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/msm_iomap.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -43,91 +43,12 @@
 #define IOMEM(x)	((void __force __iomem *)(x))
 #endif
 
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM_CSR_BASE          IOMEM(0xE0001000)
-#define MSM_CSR_PHYS          0xC0100000
-#define MSM_CSR_SIZE          SZ_4K
-
-#define MSM_GPT_PHYS          MSM_CSR_PHYS
-#define MSM_GPT_BASE          MSM_CSR_BASE
-#define MSM_GPT_SIZE          SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
-
-#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
+#if defined(CONFIG_ARCH_MSM7X30)
+#include "msm_iomap-7x30.h"
+#elif defined(CONFIG_ARCH_QSD8X50)
+#include "msm_iomap-8x50.h"
+#else
+#include "msm_iomap-7x00.h"
 #endif
 
-#define MSM_SDC1_PHYS         0xA0400000
-#define MSM_SDC1_SIZE         SZ_4K
-
-#define MSM_SDC2_PHYS         0xA0500000
-#define MSM_SDC2_SIZE         SZ_4K
-
-#define MSM_SDC3_PHYS         0xA0600000
-#define MSM_SDC3_SIZE         SZ_4K
-
-#define MSM_SDC4_PHYS         0xA0700000
-#define MSM_SDC4_SIZE         SZ_4K
-
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h
new file mode 100644
index 0000000..029463e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_smd.h
@@ -0,0 +1,109 @@
+/* linux/include/asm-arm/arch-msm/msm_smd.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SMD_H
+#define __ASM_ARCH_MSM_SMD_H
+
+typedef struct smd_channel smd_channel_t;
+
+extern int (*msm_check_for_modem_crash)(void);
+
+/* warning: notify() may be called before open returns */
+int smd_open(const char *name, smd_channel_t **ch, void *priv,
+	     void (*notify)(void *priv, unsigned event));
+
+#define SMD_EVENT_DATA 1
+#define SMD_EVENT_OPEN 2
+#define SMD_EVENT_CLOSE 3
+
+int smd_close(smd_channel_t *ch);
+
+/* passing a null pointer for data reads and discards */
+int smd_read(smd_channel_t *ch, void *data, int len);
+
+/* Write to stream channels may do a partial write and return
+** the length actually written.
+** Write to packet channels will never do a partial write --
+** it will return the requested length written or an error.
+*/
+int smd_write(smd_channel_t *ch, const void *data, int len);
+int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
+
+int smd_write_avail(smd_channel_t *ch);
+int smd_read_avail(smd_channel_t *ch);
+
+/* Returns the total size of the current packet being read.
+** Returns 0 if no packets available or a stream channel.
+*/
+int smd_cur_packet_size(smd_channel_t *ch);
+
+/* used for tty unthrottling and the like -- causes the notify()
+** callback to be called from the same lock context as is used
+** when it is called from channel updates
+*/
+void smd_kick(smd_channel_t *ch);
+
+
+#if 0
+/* these are interruptable waits which will block you until the specified
+** number of bytes are readable or writable.
+*/
+int smd_wait_until_readable(smd_channel_t *ch, int bytes);
+int smd_wait_until_writable(smd_channel_t *ch, int bytes);
+#endif
+
+typedef enum {
+	SMD_PORT_DS = 0,
+	SMD_PORT_DIAG,
+	SMD_PORT_RPC_CALL,
+	SMD_PORT_RPC_REPLY,
+	SMD_PORT_BT,
+	SMD_PORT_CONTROL,
+	SMD_PORT_MEMCPY_SPARE1,
+	SMD_PORT_DATA1,
+	SMD_PORT_DATA2,
+	SMD_PORT_DATA3,
+	SMD_PORT_DATA4,
+	SMD_PORT_DATA5,
+	SMD_PORT_DATA6,
+	SMD_PORT_DATA7,
+	SMD_PORT_DATA8,
+	SMD_PORT_DATA9,
+	SMD_PORT_DATA10,
+	SMD_PORT_DATA11,
+	SMD_PORT_DATA12,
+	SMD_PORT_DATA13,
+	SMD_PORT_DATA14,
+	SMD_PORT_DATA15,
+	SMD_PORT_DATA16,
+	SMD_PORT_DATA17,
+	SMD_PORT_DATA18,
+	SMD_PORT_DATA19,
+	SMD_PORT_DATA20,
+	SMD_PORT_GPS_NMEA,
+	SMD_PORT_BRIDGE_1,
+	SMD_PORT_BRIDGE_2,
+	SMD_PORT_BRIDGE_3,
+	SMD_PORT_BRIDGE_4,
+	SMD_PORT_BRIDGE_5,
+	SMD_PORT_LOOPBACK,
+	SMD_PORT_CS_APPS_MODEM,
+	SMD_PORT_CS_APPS_DSP,
+	SMD_PORT_CS_MODEM_DSP,
+	SMD_NUM_PORTS,
+} smd_port_id_type;
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h
new file mode 100644
index 0000000..7281337
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/sirc.h
@@ -0,0 +1,115 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SIRC_H
+#define __ASM_ARCH_MSM_SIRC_H
+
+struct sirc_regs_t {
+	void    *int_enable;
+	void    *int_enable_clear;
+	void    *int_enable_set;
+	void    *int_type;
+	void    *int_polarity;
+	void    *int_clear;
+};
+
+struct sirc_cascade_regs {
+	void    *int_status;
+	unsigned int    cascade_irq;
+};
+
+void msm_init_sirc(void);
+void msm_sirc_enter_sleep(void);
+void msm_sirc_exit_sleep(void);
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+
+#include <mach/msm_iomap.h>
+
+/*
+ * Secondary interrupt controller interrupts
+ */
+
+#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
+
+#define INT_UART1                     (FIRST_SIRC_IRQ + 0)
+#define INT_UART2                     (FIRST_SIRC_IRQ + 1)
+#define INT_UART3                     (FIRST_SIRC_IRQ + 2)
+#define INT_UART1_RX                  (FIRST_SIRC_IRQ + 3)
+#define INT_UART2_RX                  (FIRST_SIRC_IRQ + 4)
+#define INT_UART3_RX                  (FIRST_SIRC_IRQ + 5)
+#define INT_SPI_INPUT                 (FIRST_SIRC_IRQ + 6)
+#define INT_SPI_OUTPUT                (FIRST_SIRC_IRQ + 7)
+#define INT_SPI_ERROR                 (FIRST_SIRC_IRQ + 8)
+#define INT_GPIO_GROUP1               (FIRST_SIRC_IRQ + 9)
+#define INT_GPIO_GROUP2               (FIRST_SIRC_IRQ + 10)
+#define INT_GPIO_GROUP1_SECURE        (FIRST_SIRC_IRQ + 11)
+#define INT_GPIO_GROUP2_SECURE        (FIRST_SIRC_IRQ + 12)
+#define INT_AVS_SVIC                  (FIRST_SIRC_IRQ + 13)
+#define INT_AVS_REQ_UP                (FIRST_SIRC_IRQ + 14)
+#define INT_AVS_REQ_DOWN              (FIRST_SIRC_IRQ + 15)
+#define INT_PBUS_ERR                  (FIRST_SIRC_IRQ + 16)
+#define INT_AXI_ERR                   (FIRST_SIRC_IRQ + 17)
+#define INT_SMI_ERR                   (FIRST_SIRC_IRQ + 18)
+#define INT_EBI1_ERR                  (FIRST_SIRC_IRQ + 19)
+#define INT_IMEM_ERR                  (FIRST_SIRC_IRQ + 20)
+#define INT_TEMP_SENSOR               (FIRST_SIRC_IRQ + 21)
+#define INT_TV_ENC                    (FIRST_SIRC_IRQ + 22)
+#define INT_GRP2D                     (FIRST_SIRC_IRQ + 23)
+#define INT_GSBI_QUP                  (FIRST_SIRC_IRQ + 24)
+#define INT_SC_ACG                    (FIRST_SIRC_IRQ + 25)
+#define INT_WDT0                      (FIRST_SIRC_IRQ + 26)
+#define INT_WDT1                      (FIRST_SIRC_IRQ + 27)
+
+#if defined(CONFIG_MSM_SOC_REV_A)
+#define NR_SIRC_IRQS                  28
+#define SIRC_MASK                     0x0FFFFFFF
+#else
+#define NR_SIRC_IRQS                  23
+#define SIRC_MASK                     0x007FFFFF
+#endif
+
+#define LAST_SIRC_IRQ                 (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
+
+#define SPSS_SIRC_INT_SELECT          (MSM_SIRC_BASE + 0x00)
+#define SPSS_SIRC_INT_ENABLE          (MSM_SIRC_BASE + 0x04)
+#define SPSS_SIRC_INT_ENABLE_CLEAR    (MSM_SIRC_BASE + 0x08)
+#define SPSS_SIRC_INT_ENABLE_SET      (MSM_SIRC_BASE + 0x0C)
+#define SPSS_SIRC_INT_TYPE            (MSM_SIRC_BASE + 0x10)
+#define SPSS_SIRC_INT_POLARITY        (MSM_SIRC_BASE + 0x14)
+#define SPSS_SIRC_SECURITY            (MSM_SIRC_BASE + 0x18)
+#define SPSS_SIRC_IRQ_STATUS          (MSM_SIRC_BASE + 0x1C)
+#define SPSS_SIRC_IRQ1_STATUS         (MSM_SIRC_BASE + 0x20)
+#define SPSS_SIRC_RAW_STATUS          (MSM_SIRC_BASE + 0x24)
+#define SPSS_SIRC_INT_CLEAR           (MSM_SIRC_BASE + 0x28)
+#define SPSS_SIRC_SOFT_INT            (MSM_SIRC_BASE + 0x2C)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 574ccc4..d2e83f4 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -21,3 +21,8 @@ static inline void arch_reset(char mode, const char *cmd)
 {
 	for (;;) ;  /* depends on IPC w/ other core */
 }
+
+/* low level hardware reset hook -- for example, hitting the
+ * PSHOLD line on the PMIC to hard reset the system
+ */
+extern void (*msm_hw_reset_hook)(void);
diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h
index 9f9e25c..6626e78 100644
--- a/arch/arm/mach-msm/include/mach/vreg.h
+++ b/arch/arm/mach-msm/include/mach/vreg.h
@@ -23,7 +23,7 @@ struct vreg *vreg_get(struct device *dev, const char *id);
 void vreg_put(struct vreg *vreg);
 
 int vreg_enable(struct vreg *vreg);
-void vreg_disable(struct vreg *vreg);
+int vreg_disable(struct vreg *vreg);
 int vreg_set_level(struct vreg *vreg, unsigned mv);
 
 #endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 1c5e7da..1c05060 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -1,8 +1,9 @@
 /* arch/arm/mach-msm/io.c
  *
- * MSM7K io support
+ * MSM7K, QSD io support
  *
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -34,6 +35,8 @@
 		.type = MT_DEVICE_NONSHARED, \
 	 }
 
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
+	|| defined(CONFIG_ARCH_MSM7X25)
 static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
 	MSM_DEVICE(CSR),
@@ -45,9 +48,12 @@ static struct map_desc msm_io_desc[] __initdata = {
 #ifdef CONFIG_MSM_DEBUG_UART
 	MSM_DEVICE(DEBUG_UART),
 #endif
+#ifdef CONFIG_ARCH_MSM7X30
+	MSM_DEVICE(GCC),
+#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
 	},
@@ -60,9 +66,72 @@ void __init msm_map_common_io(void)
 	 * pages are peripheral interface or not.
 	 */
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-
 	iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
 }
+#endif
+
+#ifdef CONFIG_ARCH_QSD8X50
+static struct map_desc qsd8x50_io_desc[] __initdata = {
+	MSM_DEVICE(VIC),
+	MSM_DEVICE(CSR),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(DMOV),
+	MSM_DEVICE(GPIO1),
+	MSM_DEVICE(GPIO2),
+	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE(SIRC),
+	MSM_DEVICE(SCPLL),
+	MSM_DEVICE(AD5),
+	MSM_DEVICE(MDC),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
+	{
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.length =   MSM_SHARED_RAM_SIZE,
+		.type =     MT_DEVICE,
+	},
+};
+
+void __init msm_map_qsd8x50_io(void)
+{
+	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
+}
+#endif /* CONFIG_ARCH_QSD8X50 */
+
+#ifdef CONFIG_ARCH_MSM7X30
+static struct map_desc msm7x30_io_desc[] __initdata = {
+	MSM_DEVICE(VIC),
+	MSM_DEVICE(CSR),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(DMOV),
+	MSM_DEVICE(GPIO1),
+	MSM_DEVICE(GPIO2),
+	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE(CLK_CTL_SH2),
+	MSM_DEVICE(AD5),
+	MSM_DEVICE(MDC),
+	MSM_DEVICE(ACC),
+	MSM_DEVICE(SAW),
+	MSM_DEVICE(GCC),
+	MSM_DEVICE(TCSR),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
+	{
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.length =   MSM_SHARED_RAM_SIZE,
+		.type =     MT_DEVICE,
+	},
+};
+
+void __init msm_map_msm7x30_io(void)
+{
+	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
+}
+#endif /* CONFIG_ARCH_MSM7X30 */
 
 void __iomem *
 __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
@@ -76,5 +145,6 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 			mtype = MT_DEVICE_NONSHARED;
 	}
 
-	return __arm_ioremap(phys_addr, size, mtype);
+	return __arm_ioremap_caller(phys_addr, size, mtype,
+		__builtin_return_address(0));
 }
diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c
new file mode 100644
index 0000000..99f2c34
--- /dev/null
+++ b/arch/arm/mach-msm/irq-vic.c
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+
+#include <mach/msm_iomap.h>
+
+#include "smd_private.h"
+
+enum {
+	IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
+	IRQ_DEBUG_SLEEP_INT = 1U << 1,
+	IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
+	IRQ_DEBUG_SLEEP = 1U << 3,
+	IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
+};
+static int msm_irq_debug_mask;
+module_param_named(debug_mask, msm_irq_debug_mask, int,
+		   S_IRUGO | S_IWUSR | S_IWGRP);
+
+#define VIC_REG(off) (MSM_VIC_BASE + (off))
+#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
+#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
+
+#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT2     VIC_REG(0x0008)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT3     VIC_REG(0x000C)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_EN0         VIC_REG(0x0010)
+#define VIC_INT_EN1         VIC_REG(0x0014)
+#define VIC_INT_EN2         VIC_REG(0x0018)
+#define VIC_INT_EN3         VIC_REG(0x001C)
+#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
+#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
+#define VIC_INT_ENCLEAR2    VIC_REG(0x0028)
+#define VIC_INT_ENCLEAR3    VIC_REG(0x002C)
+#define VIC_INT_ENSET0      VIC_REG(0x0030)
+#define VIC_INT_ENSET1      VIC_REG(0x0034)
+#define VIC_INT_ENSET2      VIC_REG(0x0038)
+#define VIC_INT_ENSET3      VIC_REG(0x003C)
+#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE2       VIC_REG(0x0048)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE3       VIC_REG(0x004C)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY2   VIC_REG(0x0058)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY3   VIC_REG(0x005C)  /* 1: NEG, 0: POS */
+#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
+#define VIC_INT_MASTEREN    VIC_REG(0x0068)  /* 1: IRQ, 2: FIQ     */
+#define VIC_CONFIG          VIC_REG(0x006C)  /* 1: USE SC VIC */
+#else
+#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
+#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
+#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
+#endif
+
+#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
+#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
+#define VIC_IRQ_STATUS2     VIC_REG(0x0088)
+#define VIC_IRQ_STATUS3     VIC_REG(0x008C)
+#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
+#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
+#define VIC_FIQ_STATUS2     VIC_REG(0x0098)
+#define VIC_FIQ_STATUS3     VIC_REG(0x009C)
+#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
+#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
+#define VIC_RAW_STATUS2     VIC_REG(0x00A8)
+#define VIC_RAW_STATUS3     VIC_REG(0x00AC)
+#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
+#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
+#define VIC_INT_CLEAR2      VIC_REG(0x00B8)
+#define VIC_INT_CLEAR3      VIC_REG(0x00BC)
+#define VIC_SOFTINT0        VIC_REG(0x00C0)
+#define VIC_SOFTINT1        VIC_REG(0x00C4)
+#define VIC_SOFTINT2        VIC_REG(0x00C8)
+#define VIC_SOFTINT3        VIC_REG(0x00CC)
+#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
+#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
+#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+#define VIC_FIQ_VEC_RD      VIC_REG(0x00DC)
+#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
+#define VIC_FIQ_VEC_WR      VIC_REG(0x00E4)
+#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E8)
+#define VIC_IRQ_IN_STACK    VIC_REG(0x00EC)
+#define VIC_FIQ_IN_SERVICE  VIC_REG(0x00F0)
+#define VIC_FIQ_IN_STACK    VIC_REG(0x00F4)
+#define VIC_TEST_BUS_SEL    VIC_REG(0x00F8)
+#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
+#else
+#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
+#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
+#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
+#endif
+
+#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
+#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define VIC_NUM_REGS	    4
+#else
+#define VIC_NUM_REGS	    2
+#endif
+
+#if VIC_NUM_REGS == 2
+#define DPRINT_REGS(base_reg, format, ...)	      			\
+	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
+			readl(base_reg ## 0), readl(base_reg ## 1))
+#define DPRINT_ARRAY(array, format, ...)				\
+	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
+			array[0], array[1])
+#elif VIC_NUM_REGS == 4
+#define DPRINT_REGS(base_reg, format, ...) \
+	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
+			readl(base_reg ## 0), readl(base_reg ## 1),	\
+			readl(base_reg ## 2), readl(base_reg ## 3))
+#define DPRINT_ARRAY(array, format, ...)				\
+	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
+			array[0], array[1],				\
+			array[2], array[3])
+#else
+#error "VIC_NUM_REGS set to illegal value"
+#endif
+
+static uint32_t msm_irq_smsm_wake_enable[2];
+static struct {
+	uint32_t int_en[2];
+	uint32_t int_type;
+	uint32_t int_polarity;
+	uint32_t int_select;
+} msm_irq_shadow_reg[VIC_NUM_REGS];
+static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
+
+#define SMSM_FAKE_IRQ (0xff)
+static uint8_t msm_irq_to_smsm[NR_IRQS] = {
+	[INT_MDDI_EXT] = 1,
+	[INT_MDDI_PRI] = 2,
+	[INT_MDDI_CLIENT] = 3,
+	[INT_USB_OTG] = 4,
+
+	[INT_PWB_I2C] = 5,
+	[INT_SDC1_0] = 6,
+	[INT_SDC1_1] = 7,
+	[INT_SDC2_0] = 8,
+
+	[INT_SDC2_1] = 9,
+	[INT_ADSP_A9_A11] = 10,
+	[INT_UART1] = 11,
+	[INT_UART2] = 12,
+
+	[INT_UART3] = 13,
+	[INT_UART1_RX] = 14,
+	[INT_UART2_RX] = 15,
+	[INT_UART3_RX] = 16,
+
+	[INT_UART1DM_IRQ] = 17,
+	[INT_UART1DM_RX] = 18,
+	[INT_KEYSENSE] = 19,
+#if !defined(CONFIG_ARCH_MSM7X30)
+	[INT_AD_HSSD] = 20,
+#endif
+
+	[INT_NAND_WR_ER_DONE] = 21,
+	[INT_NAND_OP_DONE] = 22,
+	[INT_TCHSCRN1] = 23,
+	[INT_TCHSCRN2] = 24,
+
+	[INT_TCHSCRN_SSBI] = 25,
+	[INT_USB_HS] = 26,
+	[INT_UART2DM_RX] = 27,
+	[INT_UART2DM_IRQ] = 28,
+
+	[INT_SDC4_1] = 29,
+	[INT_SDC4_0] = 30,
+	[INT_SDC3_1] = 31,
+	[INT_SDC3_0] = 32,
+
+	/* fake wakeup interrupts */
+	[INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
+	[INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_0] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_1] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_5] = SMSM_FAKE_IRQ,
+	[INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
+	[INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
+	[INT_ADSP_A11] = SMSM_FAKE_IRQ,
+#ifdef CONFIG_ARCH_QSD8X50
+	[INT_SIRC_0] = SMSM_FAKE_IRQ,
+	[INT_SIRC_1] = SMSM_FAKE_IRQ,
+#endif
+};
+
+static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
+{
+	int i;
+
+	for (i = 0; i < VIC_NUM_REGS; i++)
+		writel(val, base + (i * 4));
+}
+
+static void msm_irq_ack(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, irq);
+	irq = 1 << (irq & 31);
+	writel(irq, reg);
+}
+
+static void msm_irq_mask(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	msm_irq_shadow_reg[index].int_en[0] &= ~mask;
+	writel(mask, reg);
+	if (smsm_irq == 0)
+		msm_irq_idle_disable[index] &= ~mask;
+	else {
+		mask = 1UL << (smsm_irq - 1);
+		msm_irq_smsm_wake_enable[0] &= ~mask;
+	}
+}
+
+static void msm_irq_unmask(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	msm_irq_shadow_reg[index].int_en[0] |= mask;
+	writel(mask, reg);
+
+	if (smsm_irq == 0)
+		msm_irq_idle_disable[index] |= mask;
+	else {
+		mask = 1UL << (smsm_irq - 1);
+		msm_irq_smsm_wake_enable[0] |= mask;
+	}
+}
+
+static int msm_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	if (smsm_irq == 0) {
+		printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", irq);
+		return -EINVAL;
+	}
+	if (on)
+		msm_irq_shadow_reg[index].int_en[1] |= mask;
+	else
+		msm_irq_shadow_reg[index].int_en[1] &= ~mask;
+
+	if (smsm_irq == SMSM_FAKE_IRQ)
+		return 0;
+
+	mask = 1UL << (smsm_irq - 1);
+	if (on)
+		msm_irq_smsm_wake_enable[1] |= mask;
+	else
+		msm_irq_smsm_wake_enable[1] &= ~mask;
+	return 0;
+}
+
+static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, irq);
+	void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	int b = 1 << (irq & 31);
+	uint32_t polarity;
+	uint32_t type;
+
+	polarity = msm_irq_shadow_reg[index].int_polarity;
+	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+		polarity |= b;
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+		polarity &= ~b;
+	writel(polarity, preg);
+	msm_irq_shadow_reg[index].int_polarity = polarity;
+
+	type = msm_irq_shadow_reg[index].int_type;
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		type |= b;
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	}
+	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
+		type &= ~b;
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+	writel(type, treg);
+	msm_irq_shadow_reg[index].int_type = type;
+	return 0;
+}
+
+static struct irq_chip msm_irq_chip = {
+	.name      = "msm",
+	.disable   = msm_irq_mask,
+	.ack       = msm_irq_ack,
+	.mask      = msm_irq_mask,
+	.unmask    = msm_irq_unmask,
+	.set_wake  = msm_irq_set_wake,
+	.set_type  = msm_irq_set_type,
+};
+
+void __init msm_init_irq(void)
+{
+	unsigned n;
+
+	/* select level interrupts */
+	msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
+
+	/* select highlevel interrupts */
+	msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
+
+	/* select IRQ for all INTs */
+	msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
+
+	/* disable all INTs */
+	msm_irq_write_all_regs(VIC_INT_EN0, 0);
+
+	/* don't use vic */
+	writel(0, VIC_CONFIG);
+
+	/* enable interrupt controller */
+	writel(3, VIC_INT_MASTEREN);
+
+	for (n = 0; n < NR_MSM_IRQS; n++) {
+		set_irq_chip(n, &msm_irq_chip);
+		set_irq_handler(n, handle_level_irq);
+		set_irq_flags(n, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 69ca0dd..6c8d5f8 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -101,11 +101,11 @@ static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
 
 	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
 		writel(readl(treg) | b, treg);
-		set_irq_handler(irq, handle_edge_irq);
+		irq_desc[irq].handle_irq = handle_edge_irq;
 	}
 	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
 		writel(readl(treg) & (~b), treg);
-		set_irq_handler(irq, handle_level_irq);
+		irq_desc[irq].handle_irq = handle_level_irq;
 	}
 	return 0;
 }
diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c
new file mode 100644
index 0000000..b64ba5a
--- /dev/null
+++ b/arch/arm/mach-msm/last_radio_log.c
@@ -0,0 +1,82 @@
+/* arch/arm/mach-msm/last_radio_log.c
+ *
+ * Extract the log from a modem crash though SMEM
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#include "smd_private.h"
+
+static void *radio_log_base;
+static size_t radio_log_size;
+
+extern void *smem_item(unsigned id, unsigned *size);
+
+static ssize_t last_radio_log_read(struct file *file, char __user *buf,
+			size_t len, loff_t *offset)
+{
+	loff_t pos = *offset;
+	ssize_t count;
+
+	if (pos >= radio_log_size)
+		return 0;
+
+	count = min(len, (size_t)(radio_log_size - pos));
+	if (copy_to_user(buf, radio_log_base + pos, count)) {
+		pr_err("%s: copy to user failed\n", __func__);
+		return -EFAULT;
+	}
+
+	*offset += count;
+	return count;
+}
+
+static struct file_operations last_radio_log_fops = {
+	.read = last_radio_log_read
+};
+
+void msm_init_last_radio_log(struct module *owner)
+{
+	struct proc_dir_entry *entry;
+
+	if (last_radio_log_fops.owner) {
+		pr_err("%s: already claimed\n", __func__);
+		return;
+	}
+
+	radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
+	if (!radio_log_base) {
+		pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
+		return;
+	}
+
+	entry = create_proc_entry("last_radio_log", S_IFREG | S_IRUGO, NULL);
+	if (!entry) {
+		pr_err("%s: could not create proc entry for radio log\n",
+				__func__);
+		return;
+	}
+
+	pr_err("%s: last radio log is %d bytes long\n", __func__,
+		radio_log_size);
+	last_radio_log_fops.owner = owner;
+	entry->proc_fops = &last_radio_log_fops;
+	entry->size = radio_log_size;
+}
+EXPORT_SYMBOL(msm_init_last_radio_log);
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 915ee70..67e701c 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -23,11 +23,18 @@
 
 #include "proc_comm.h"
 
-#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4)
+static inline void msm_a2m_int(uint32_t irq)
+{
+#if defined(CONFIG_ARCH_MSM7X30)
+	writel(1 << irq, MSM_GCC_BASE + 0x8);
+#else
+	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
+#endif
+}
 
 static inline void notify_other_proc_comm(void)
 {
-	writel(1, MSM_A2M_INT(6));
+	msm_a2m_int(6);
 }
 
 #define APP_COMMAND 0x00
@@ -107,4 +114,17 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
 	return ret;
 }
 
-
+/*
+ * We need to wait for the ARM9 to at least partially boot
+ * up before we can continue. Since the ARM9 does resource
+ * allocation, if we dont' wait we could end up crashing or in
+ * and unknown state. This function should be called early to
+ * wait on the ARM9.
+ */
+void __init proc_comm_boot_wait(void)
+{
+	void __iomem *base = MSM_SHARED_RAM_BASE;
+ 
+	proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
+ 
+}
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
index 834760f..12da4ca 100644
--- a/arch/arm/mach-msm/proc_comm.h
+++ b/arch/arm/mach-msm/proc_comm.h
@@ -16,6 +16,8 @@
 #ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
 #define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
 
+#include <linux/init.h>
+
 enum {
 	PCOM_CMD_IDLE = 0x0,
 	PCOM_CMD_DONE,
@@ -62,19 +64,104 @@ enum {
 	PCOM_RESET_CHIP_IMM,
 	PCOM_PM_VID_EN,
 	PCOM_VREG_PULLDOWN,
+	PCOM_GET_MODEM_VERSION,
+	PCOM_CLK_REGIME_SEC_RESET,
+	PCOM_CLK_REGIME_SEC_RESET_ASSERT,
+	PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
+	PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
+	PCOM_CLK_REGIME_SEC_ENABLE,
+	PCOM_CLK_REGIME_SEC_DISABLE,
+	PCOM_CLK_REGIME_SEC_IS_ON,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
+	PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
+	PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
+	PCOM_CLK_REGIME_SEC_SEL_SPEED,
+	PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
+	PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
+	PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
+	PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
+	PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
+	PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
+	PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
+	PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
+	PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
+	PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
+	PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_LCD_CTRL,
+	PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
+	PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
+	PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
+	PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
+	PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
+	PCOM_GPIO_CONFIG,
+	PCOM_GPIO_CONFIGURE_GROUP,
+	PCOM_GPIO_TLMM_SET_PORT,
+	PCOM_GPIO_TLMM_CONFIG_EX,
+	PCOM_SET_FTM_BOOT_COUNT,
+	PCOM_RESERVED0,
+	PCOM_RESERVED1,
+	PCOM_CUSTOMER_CMD1,
+	PCOM_CUSTOMER_CMD2,
+	PCOM_CUSTOMER_CMD3,
+	PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
+	PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
+	PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
+	PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
+	PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
+	PCOM_SET_SW_WATCHDOG_STATE,
+	PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
+	PCOM_PM_MPP_CONFIG_I_SINK,
+	PCOM_RESERVED_101,
+	PCOM_MSM_HSUSB_PHY_RESET,
+	PCOM_GET_BATT_MV_LEVEL,
+	PCOM_CHG_USB_IS_PC_CONNECTED,
+	PCOM_CHG_USB_IS_CHARGER_CONNECTED,
+	PCOM_CHG_USB_IS_DISCONNECTED,
+	PCOM_CHG_USB_IS_AVAILABLE,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
+	PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
+	PCOM_CLKCTL_RPC_RESET_ASSERT,
+	PCOM_CLKCTL_RPC_RESET_DEASSERT,
+	PCOM_CLKCTL_RPC_RAIL_ON,
+	PCOM_CLKCTL_RPC_RAIL_OFF,
+	PCOM_CLKCTL_RPC_RAIL_ENABLE,
+	PCOM_CLKCTL_RPC_RAIL_DISABLE,
+	PCOM_CLKCTL_RPC_RAIL_CONTROL,
+	PCOM_CLKCTL_RPC_MIN_MSMC1,
 	PCOM_NUM_CMDS,
 };
 
 enum {
-	 PCOM_INVALID_STATUS = 0x0,
-	 PCOM_READY,
-	 PCOM_CMD_RUNNING,
-	 PCOM_CMD_SUCCESS,
-	 PCOM_CMD_FAIL,
+	PCOM_INVALID_STATUS = 0x0,
+	PCOM_READY,
+	PCOM_CMD_RUNNING,
+	PCOM_CMD_SUCCESS,
+	PCOM_CMD_FAIL,
+	PCOM_CMD_FAIL_FALSE_RETURNED,
+	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
+	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
+	PCOM_CMD_FAIL_CMD_UNREGISTERED,
+	PCOM_CMD_FAIL_CMD_LOCKED,
+	PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
+	PCOM_CMD_FAIL_BAD_DESTINATION,
+	PCOM_CMD_FAIL_SERVER_RESET,
+	PCOM_CMD_FAIL_SMSM_NOT_INIT,
+	PCOM_CMD_FAIL_PROC_COMM_BUSY,
+	PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
+
 };
 
 /* List of VREGs that support the Pull Down Resistor setting. */
-enum {
+enum vreg_pdown_id {
 	PM_VREG_PDOWN_MSMA_ID,
 	PM_VREG_PDOWN_MSMP_ID,
 	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
@@ -131,6 +218,11 @@ enum {
 	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
 };
 
+enum {
+	PCOM_CLKRGM_APPS_RESET_USB_PHY	= 34,
+	PCOM_CLKRGM_APPS_RESET_USBH	= 37,
+};
+
 /* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
 
 #define GPIO_ENABLE	0
@@ -161,5 +253,6 @@ enum {
 		(((drvstr) & 0xF) << 17))
 
 int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
+void __init proc_comm_boot_wait(void);
 
 #endif
diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c
new file mode 100644
index 0000000..b079452
--- /dev/null
+++ b/arch/arm/mach-msm/sirc.c
@@ -0,0 +1,177 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+
+static unsigned int int_enable;
+static unsigned int wake_enable;
+
+static struct sirc_regs_t sirc_regs = {
+	.int_enable       = SPSS_SIRC_INT_ENABLE,
+	.int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
+	.int_enable_set   = SPSS_SIRC_INT_ENABLE_SET,
+	.int_type         = SPSS_SIRC_INT_TYPE,
+	.int_polarity     = SPSS_SIRC_INT_POLARITY,
+	.int_clear        = SPSS_SIRC_INT_CLEAR,
+};
+
+static struct sirc_cascade_regs sirc_reg_table[] = {
+	{
+		.int_status  = SPSS_SIRC_IRQ_STATUS,
+		.cascade_irq = INT_SIRC_0,
+	}
+};
+
+static unsigned int save_type;
+static unsigned int save_polarity;
+
+/* Mask off the given interrupt. Keep the int_enable mask in sync with
+   the enable reg, so it can be restored after power collapse. */
+static void sirc_irq_mask(unsigned int irq)
+{
+	unsigned int mask;
+
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_enable_clear);
+	int_enable &= ~mask;
+	return;
+}
+
+/* Unmask the given interrupt. Keep the int_enable mask in sync with
+   the enable reg, so it can be restored after power collapse. */
+static void sirc_irq_unmask(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_enable_set);
+	int_enable |= mask;
+	return;
+}
+
+static void sirc_irq_ack(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_clear);
+	return;
+}
+
+static int sirc_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned int mask;
+
+	/* Used to set the interrupt enable mask during power collapse. */
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	if (on)
+		wake_enable |= mask;
+	else
+		wake_enable &= ~mask;
+
+	return 0;
+}
+
+static int sirc_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned int mask;
+	unsigned int val;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	val = readl(sirc_regs.int_polarity);
+
+	if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
+		val |= mask;
+	else
+		val &= ~mask;
+
+	writel(val, sirc_regs.int_polarity);
+
+	val = readl(sirc_regs.int_type);
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		val |= mask;
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	} else {
+		val &= ~mask;
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+
+	writel(val, sirc_regs.int_type);
+
+	return 0;
+}
+
+/* Finds the pending interrupt on the passed cascade irq and redrives it */
+static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int reg = 0;
+	unsigned int sirq;
+	unsigned int status;
+
+	while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
+		(sirc_reg_table[reg].cascade_irq != irq))
+		reg++;
+
+	status = readl(sirc_reg_table[reg].int_status);
+	status &= SIRC_MASK;
+	if (status == 0)
+		return;
+
+	for (sirq = 0;
+	     (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
+	     sirq++)
+		;
+	generic_handle_irq(sirq+FIRST_SIRC_IRQ);
+
+	desc->chip->ack(irq);
+}
+
+static struct irq_chip sirc_irq_chip = {
+	.name      = "sirc",
+	.ack       = sirc_irq_ack,
+	.mask      = sirc_irq_mask,
+	.unmask    = sirc_irq_unmask,
+	.set_wake  = sirc_irq_set_wake,
+	.set_type  = sirc_irq_set_type,
+};
+
+void __init msm_init_sirc(void)
+{
+	int i;
+
+	int_enable = 0;
+	wake_enable = 0;
+
+	for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
+		set_irq_chip(i, &sirc_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
+		set_irq_chained_handler(sirc_reg_table[i].cascade_irq,
+					sirc_irq_handler);
+		set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
+	}
+	return;
+}
+
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
new file mode 100644
index 0000000..cf11d41
--- /dev/null
+++ b/arch/arm/mach-msm/smd.c
@@ -0,0 +1,1046 @@
+/* arch/arm/mach-msm/smd.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+
+#include <mach/msm_smd.h>
+#include <mach/system.h>
+
+#include "smd_private.h"
+#include "proc_comm.h"
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#define CONFIG_QDSP6 1
+#endif
+
+void (*msm_hw_reset_hook)(void);
+
+#define MODULE_NAME "msm_smd"
+
+enum {
+	MSM_SMD_DEBUG = 1U << 0,
+	MSM_SMSM_DEBUG = 1U << 0,
+};
+
+static int msm_smd_debug_mask;
+
+struct shared_info {
+	int ready;
+	unsigned state;
+};
+
+static unsigned dummy_state[SMSM_STATE_COUNT];
+
+static struct shared_info smd_info = {
+	.state = (unsigned) &dummy_state,
+};
+
+module_param_named(debug_mask, msm_smd_debug_mask,
+		   int, S_IRUGO | S_IWUSR | S_IWGRP);
+
+static unsigned last_heap_free = 0xffffffff;
+
+static inline void notify_other_smsm(void)
+{
+	msm_a2m_int(5);
+#ifdef CONFIG_QDSP6
+	msm_a2m_int(8);
+#endif
+}
+
+static inline void notify_modem_smd(void)
+{
+	msm_a2m_int(0);
+}
+
+static inline void notify_dsp_smd(void)
+{
+	msm_a2m_int(8);
+}
+
+static void smd_diag(void)
+{
+	char *x;
+
+	x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
+	if (x != 0) {
+		x[SZ_DIAG_ERR_MSG - 1] = 0;
+		pr_info("smem: DIAG '%s'\n", x);
+	}
+}
+
+/* call when SMSM_RESET flag is set in the A9's smsm_state */
+static void handle_modem_crash(void)
+{
+	pr_err("ARM9 has CRASHED\n");
+	smd_diag();
+
+	/* hard reboot if possible */
+	if (msm_hw_reset_hook)
+		msm_hw_reset_hook();
+
+	/* in this case the modem or watchdog should reboot us */
+	for (;;)
+		;
+}
+
+uint32_t raw_smsm_get_state(enum smsm_state_item item)
+{
+	return readl(smd_info.state + item * 4);
+}
+
+static int check_for_modem_crash(void)
+{
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) {
+		handle_modem_crash();
+		return -1;
+	}
+	return 0;
+}
+
+/* the spinlock is used to synchronize between the
+ * irq handler and code that mutates the channel
+ * list or fiddles with channel state
+ */
+DEFINE_SPINLOCK(smd_lock);
+DEFINE_SPINLOCK(smem_lock);
+
+/* the mutex is used during open() and close()
+ * operations to avoid races while creating or
+ * destroying smd_channel structures
+ */
+static DEFINE_MUTEX(smd_creation_mutex);
+
+static int smd_initialized;
+
+LIST_HEAD(smd_ch_closed_list);
+LIST_HEAD(smd_ch_list_modem);
+LIST_HEAD(smd_ch_list_dsp);
+
+static unsigned char smd_ch_allocated[64];
+static struct work_struct probe_work;
+
+/* how many bytes are available for reading */
+static int smd_stream_read_avail(struct smd_channel *ch)
+{
+	return (ch->recv->head - ch->recv->tail) & ch->fifo_mask;
+}
+
+/* how many bytes we are free to write */
+static int smd_stream_write_avail(struct smd_channel *ch)
+{
+	return ch->fifo_mask -
+		((ch->send->head - ch->send->tail) & ch->fifo_mask);
+}
+
+static int smd_packet_read_avail(struct smd_channel *ch)
+{
+	if (ch->current_packet) {
+		int n = smd_stream_read_avail(ch);
+		if (n > ch->current_packet)
+			n = ch->current_packet;
+		return n;
+	} else {
+		return 0;
+	}
+}
+
+static int smd_packet_write_avail(struct smd_channel *ch)
+{
+	int n = smd_stream_write_avail(ch);
+	return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0;
+}
+
+static int ch_is_open(struct smd_channel *ch)
+{
+	return (ch->recv->state == SMD_SS_OPENED) &&
+		(ch->send->state == SMD_SS_OPENED);
+}
+
+/* provide a pointer and length to readable data in the fifo */
+static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr)
+{
+	unsigned head = ch->recv->head;
+	unsigned tail = ch->recv->tail;
+	*ptr = (void *) (ch->recv_data + tail);
+
+	if (tail <= head)
+		return head - tail;
+	else
+		return ch->fifo_size - tail;
+}
+
+/* advance the fifo read pointer after data from ch_read_buffer is consumed */
+static void ch_read_done(struct smd_channel *ch, unsigned count)
+{
+	BUG_ON(count > smd_stream_read_avail(ch));
+	ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask;
+	ch->send->fTAIL = 1;
+}
+
+/* basic read interface to ch_read_{buffer,done} used
+ * by smd_*_read() and update_packet_state()
+ * will read-and-discard if the _data pointer is null
+ */
+static int ch_read(struct smd_channel *ch, void *_data, int len)
+{
+	void *ptr;
+	unsigned n;
+	unsigned char *data = _data;
+	int orig_len = len;
+
+	while (len > 0) {
+		n = ch_read_buffer(ch, &ptr);
+		if (n == 0)
+			break;
+
+		if (n > len)
+			n = len;
+		if (_data)
+			memcpy(data, ptr, n);
+
+		data += n;
+		len -= n;
+		ch_read_done(ch, n);
+	}
+
+	return orig_len - len;
+}
+
+static void update_stream_state(struct smd_channel *ch)
+{
+	/* streams have no special state requiring updating */
+}
+
+static void update_packet_state(struct smd_channel *ch)
+{
+	unsigned hdr[5];
+	int r;
+
+	/* can't do anything if we're in the middle of a packet */
+	if (ch->current_packet != 0)
+		return;
+
+	/* don't bother unless we can get the full header */
+	if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE)
+		return;
+
+	r = ch_read(ch, hdr, SMD_HEADER_SIZE);
+	BUG_ON(r != SMD_HEADER_SIZE);
+
+	ch->current_packet = hdr[0];
+}
+
+/* provide a pointer and length to next free space in the fifo */
+static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr)
+{
+	unsigned head = ch->send->head;
+	unsigned tail = ch->send->tail;
+	*ptr = (void *) (ch->send_data + head);
+
+	if (head < tail) {
+		return tail - head - 1;
+	} else {
+		if (tail == 0)
+			return ch->fifo_size - head - 1;
+		else
+			return ch->fifo_size - head;
+	}
+}
+
+/* advace the fifo write pointer after freespace
+ * from ch_write_buffer is filled
+ */
+static void ch_write_done(struct smd_channel *ch, unsigned count)
+{
+	BUG_ON(count > smd_stream_write_avail(ch));
+	ch->send->head = (ch->send->head + count) & ch->fifo_mask;
+	ch->send->fHEAD = 1;
+}
+
+static void ch_set_state(struct smd_channel *ch, unsigned n)
+{
+	if (n == SMD_SS_OPENED) {
+		ch->send->fDSR = 1;
+		ch->send->fCTS = 1;
+		ch->send->fCD = 1;
+	} else {
+		ch->send->fDSR = 0;
+		ch->send->fCTS = 0;
+		ch->send->fCD = 0;
+	}
+	ch->send->state = n;
+	ch->send->fSTATE = 1;
+	ch->notify_other_cpu();
+}
+
+static void do_smd_probe(void)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	if (shared->heap_info.free_offset != last_heap_free) {
+		last_heap_free = shared->heap_info.free_offset;
+		schedule_work(&probe_work);
+	}
+}
+
+static void smd_state_change(struct smd_channel *ch,
+			     unsigned last, unsigned next)
+{
+	ch->last_state = next;
+
+	pr_info("SMD: ch %d %d -> %d\n", ch->n, last, next);
+
+	switch (next) {
+	case SMD_SS_OPENING:
+		ch->recv->tail = 0;
+	case SMD_SS_OPENED:
+		if (ch->send->state != SMD_SS_OPENED)
+			ch_set_state(ch, SMD_SS_OPENED);
+		ch->notify(ch->priv, SMD_EVENT_OPEN);
+		break;
+	case SMD_SS_FLUSHING:
+	case SMD_SS_RESET:
+		/* we should force them to close? */
+	default:
+		ch->notify(ch->priv, SMD_EVENT_CLOSE);
+	}
+}
+
+static void handle_smd_irq(struct list_head *list, void (*notify)(void))
+{
+	unsigned long flags;
+	struct smd_channel *ch;
+	int do_notify = 0;
+	unsigned ch_flags;
+	unsigned tmp;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, list, ch_list) {
+		ch_flags = 0;
+		if (ch_is_open(ch)) {
+			if (ch->recv->fHEAD) {
+				ch->recv->fHEAD = 0;
+				ch_flags |= 1;
+				do_notify |= 1;
+			}
+			if (ch->recv->fTAIL) {
+				ch->recv->fTAIL = 0;
+				ch_flags |= 2;
+				do_notify |= 1;
+			}
+			if (ch->recv->fSTATE) {
+				ch->recv->fSTATE = 0;
+				ch_flags |= 4;
+				do_notify |= 1;
+			}
+		}
+		tmp = ch->recv->state;
+		if (tmp != ch->last_state)
+			smd_state_change(ch, ch->last_state, tmp);
+		if (ch_flags) {
+			ch->update_state(ch);
+			ch->notify(ch->priv, SMD_EVENT_DATA);
+		}
+	}
+	if (do_notify)
+		notify();
+	spin_unlock_irqrestore(&smd_lock, flags);
+	do_smd_probe();
+}
+
+static irqreturn_t smd_modem_irq_handler(int irq, void *data)
+{
+	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
+	return IRQ_HANDLED;
+}
+
+#if defined(CONFIG_QDSP6)
+static irqreturn_t smd_dsp_irq_handler(int irq, void *data)
+{
+	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
+	return IRQ_HANDLED;
+}
+#endif
+
+static void smd_fake_irq_handler(unsigned long arg)
+{
+	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
+	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
+}
+
+static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0);
+
+static inline int smd_need_int(struct smd_channel *ch)
+{
+	if (ch_is_open(ch)) {
+		if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE)
+			return 1;
+		if (ch->recv->state != ch->last_state)
+			return 1;
+	}
+	return 0;
+}
+
+void smd_sleep_exit(void)
+{
+	unsigned long flags;
+	struct smd_channel *ch;
+	int need_int = 0;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, &smd_ch_list_modem, ch_list) {
+		if (smd_need_int(ch)) {
+			need_int = 1;
+			break;
+		}
+	}
+	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) {
+		if (smd_need_int(ch)) {
+			need_int = 1;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&smd_lock, flags);
+	do_smd_probe();
+
+	if (need_int) {
+		if (msm_smd_debug_mask & MSM_SMD_DEBUG)
+			pr_info("smd_sleep_exit need interrupt\n");
+		tasklet_schedule(&smd_fake_irq_tasklet);
+	}
+}
+
+
+void smd_kick(smd_channel_t *ch)
+{
+	unsigned long flags;
+	unsigned tmp;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->update_state(ch);
+	tmp = ch->recv->state;
+	if (tmp != ch->last_state) {
+		ch->last_state = tmp;
+		if (tmp == SMD_SS_OPENED)
+			ch->notify(ch->priv, SMD_EVENT_OPEN);
+		else
+			ch->notify(ch->priv, SMD_EVENT_CLOSE);
+	}
+	ch->notify(ch->priv, SMD_EVENT_DATA);
+	ch->notify_other_cpu();
+	spin_unlock_irqrestore(&smd_lock, flags);
+}
+
+static int smd_is_packet(int chn, unsigned type)
+{
+	type &= SMD_KIND_MASK;
+	if (type == SMD_KIND_PACKET)
+		return 1;
+	if (type == SMD_KIND_STREAM)
+		return 0;
+
+	/* older AMSS reports SMD_KIND_UNKNOWN always */
+	if ((chn > 4) || (chn == 1))
+		return 1;
+	else
+		return 0;
+}
+
+static int smd_stream_write(smd_channel_t *ch, const void *_data, int len)
+{
+	void *ptr;
+	const unsigned char *buf = _data;
+	unsigned xfer;
+	int orig_len = len;
+
+	if (len < 0)
+		return -EINVAL;
+
+	while ((xfer = ch_write_buffer(ch, &ptr)) != 0) {
+		if (!ch_is_open(ch))
+			break;
+		if (xfer > len)
+			xfer = len;
+		memcpy(ptr, buf, xfer);
+		ch_write_done(ch, xfer);
+		len -= xfer;
+		buf += xfer;
+		if (len == 0)
+			break;
+	}
+
+	ch->notify_other_cpu();
+
+	return orig_len - len;
+}
+
+static int smd_packet_write(smd_channel_t *ch, const void *_data, int len)
+{
+	unsigned hdr[5];
+
+	if (len < 0)
+		return -EINVAL;
+
+	if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE))
+		return -ENOMEM;
+
+	hdr[0] = len;
+	hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0;
+
+	smd_stream_write(ch, hdr, sizeof(hdr));
+	smd_stream_write(ch, _data, len);
+
+	return len;
+}
+
+static int smd_stream_read(smd_channel_t *ch, void *data, int len)
+{
+	int r;
+
+	if (len < 0)
+		return -EINVAL;
+
+	r = ch_read(ch, data, len);
+	if (r > 0)
+		ch->notify_other_cpu();
+
+	return r;
+}
+
+static int smd_packet_read(smd_channel_t *ch, void *data, int len)
+{
+	unsigned long flags;
+	int r;
+
+	if (len < 0)
+		return -EINVAL;
+
+	if (len > ch->current_packet)
+		len = ch->current_packet;
+
+	r = ch_read(ch, data, len);
+	if (r > 0)
+		ch->notify_other_cpu();
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->current_packet -= r;
+	update_packet_state(ch);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	return r;
+}
+
+static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
+{
+	struct smd_channel *ch;
+
+	ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL);
+	if (ch == 0) {
+		pr_err("smd_alloc_channel() out of memory\n");
+		return -1;
+	}
+	ch->n = cid;
+
+	if (_smd_alloc_channel(ch)) {
+		kfree(ch);
+		return -1;
+	}
+
+	ch->fifo_mask = ch->fifo_size - 1;
+	ch->type = type;
+
+	if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
+		ch->notify_other_cpu = notify_modem_smd;
+	else
+		ch->notify_other_cpu = notify_dsp_smd;
+
+	if (smd_is_packet(cid, type)) {
+		ch->read = smd_packet_read;
+		ch->write = smd_packet_write;
+		ch->read_avail = smd_packet_read_avail;
+		ch->write_avail = smd_packet_write_avail;
+		ch->update_state = update_packet_state;
+	} else {
+		ch->read = smd_stream_read;
+		ch->write = smd_stream_write;
+		ch->read_avail = smd_stream_read_avail;
+		ch->write_avail = smd_stream_write_avail;
+		ch->update_state = update_stream_state;
+	}
+
+	if ((type & 0xff) == 0)
+		memcpy(ch->name, "SMD_", 4);
+	else
+		memcpy(ch->name, "DSP_", 4);
+	memcpy(ch->name + 4, name, 20);
+	ch->name[23] = 0;
+	ch->pdev.name = ch->name;
+	ch->pdev.id = -1;
+
+	pr_info("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
+		ch->n, ch->fifo_size, ch->name);
+
+	mutex_lock(&smd_creation_mutex);
+	list_add(&ch->ch_list, &smd_ch_closed_list);
+	mutex_unlock(&smd_creation_mutex);
+
+	platform_device_register(&ch->pdev);
+	return 0;
+}
+
+static void smd_channel_probe_worker(struct work_struct *work)
+{
+	struct smd_alloc_elm *shared;
+	unsigned ctype;
+	unsigned type;
+	unsigned n;
+
+	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
+	if (!shared) {
+		pr_err("smd: cannot find allocation table\n");
+		return;
+	}
+	for (n = 0; n < 64; n++) {
+		if (smd_ch_allocated[n])
+			continue;
+		if (!shared[n].ref_count)
+			continue;
+		if (!shared[n].name[0])
+			continue;
+		ctype = shared[n].ctype;
+		type = ctype & SMD_TYPE_MASK;
+
+		/* DAL channels are stream but neither the modem,
+		 * nor the DSP correctly indicate this.  Fixup manually.
+		 */
+		if (!memcmp(shared[n].name, "DAL", 3))
+			ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM;
+
+		type = shared[n].ctype & SMD_TYPE_MASK;
+		if ((type == SMD_TYPE_APPS_MODEM) ||
+		    (type == SMD_TYPE_APPS_DSP))
+			if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype))
+				smd_ch_allocated[n] = 1;
+	}
+}
+
+static void do_nothing_notify(void *priv, unsigned flags)
+{
+}
+
+struct smd_channel *smd_get_channel(const char *name)
+{
+	struct smd_channel *ch;
+
+	mutex_lock(&smd_creation_mutex);
+	list_for_each_entry(ch, &smd_ch_closed_list, ch_list) {
+		if (!strcmp(name, ch->name)) {
+			list_del(&ch->ch_list);
+			mutex_unlock(&smd_creation_mutex);
+			return ch;
+		}
+	}
+	mutex_unlock(&smd_creation_mutex);
+
+	return NULL;
+}
+
+int smd_open(const char *name, smd_channel_t **_ch,
+	     void *priv, void (*notify)(void *, unsigned))
+{
+	struct smd_channel *ch;
+	unsigned long flags;
+
+	if (smd_initialized == 0) {
+		pr_info("smd_open() before smd_init()\n");
+		return -ENODEV;
+	}
+
+	ch = smd_get_channel(name);
+	if (!ch)
+		return -ENODEV;
+
+	if (notify == 0)
+		notify = do_nothing_notify;
+
+	ch->notify = notify;
+	ch->current_packet = 0;
+	ch->last_state = SMD_SS_CLOSED;
+	ch->priv = priv;
+
+	*_ch = ch;
+
+	spin_lock_irqsave(&smd_lock, flags);
+
+	if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
+		list_add(&ch->ch_list, &smd_ch_list_modem);
+	else
+		list_add(&ch->ch_list, &smd_ch_list_dsp);
+
+	/* If the remote side is CLOSING, we need to get it to
+	 * move to OPENING (which we'll do by moving from CLOSED to
+	 * OPENING) and then get it to move from OPENING to
+	 * OPENED (by doing the same state change ourselves).
+	 *
+	 * Otherwise, it should be OPENING and we can move directly
+	 * to OPENED so that it will follow.
+	 */
+	if (ch->recv->state == SMD_SS_CLOSING) {
+		ch->send->head = 0;
+		ch_set_state(ch, SMD_SS_OPENING);
+	} else {
+		ch_set_state(ch, SMD_SS_OPENED);
+	}
+	spin_unlock_irqrestore(&smd_lock, flags);
+	smd_kick(ch);
+
+	return 0;
+}
+
+int smd_close(smd_channel_t *ch)
+{
+	unsigned long flags;
+
+	pr_info("smd_close(%p)\n", ch);
+
+	if (ch == 0)
+		return -1;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->notify = do_nothing_notify;
+	list_del(&ch->ch_list);
+	ch_set_state(ch, SMD_SS_CLOSED);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	mutex_lock(&smd_creation_mutex);
+	list_add(&ch->ch_list, &smd_ch_closed_list);
+	mutex_unlock(&smd_creation_mutex);
+
+	return 0;
+}
+
+int smd_read(smd_channel_t *ch, void *data, int len)
+{
+	return ch->read(ch, data, len);
+}
+
+int smd_write(smd_channel_t *ch, const void *data, int len)
+{
+	return ch->write(ch, data, len);
+}
+
+int smd_write_atomic(smd_channel_t *ch, const void *data, int len)
+{
+	unsigned long flags;
+	int res;
+	spin_lock_irqsave(&smd_lock, flags);
+	res = ch->write(ch, data, len);
+	spin_unlock_irqrestore(&smd_lock, flags);
+	return res;
+}
+
+int smd_read_avail(smd_channel_t *ch)
+{
+	return ch->read_avail(ch);
+}
+
+int smd_write_avail(smd_channel_t *ch)
+{
+	return ch->write_avail(ch);
+}
+
+int smd_wait_until_readable(smd_channel_t *ch, int bytes)
+{
+	return -1;
+}
+
+int smd_wait_until_writable(smd_channel_t *ch, int bytes)
+{
+	return -1;
+}
+
+int smd_cur_packet_size(smd_channel_t *ch)
+{
+	return ch->current_packet;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+void *smem_alloc(unsigned id, unsigned size)
+{
+	return smem_find(id, size);
+}
+
+void *smem_item(unsigned id, unsigned *size)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	struct smem_heap_entry *toc = shared->heap_toc;
+
+	if (id >= SMEM_NUM_ITEMS)
+		return 0;
+
+	if (toc[id].allocated) {
+		*size = toc[id].size;
+		return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
+	} else {
+		*size = 0;
+	}
+
+	return 0;
+}
+
+void *smem_find(unsigned id, unsigned size_in)
+{
+	unsigned size;
+	void *ptr;
+
+	ptr = smem_item(id, &size);
+	if (!ptr)
+		return 0;
+
+	size_in = ALIGN(size_in, 8);
+	if (size_in != size) {
+		pr_err("smem_find(%d, %d): wrong size %d\n",
+		       id, size_in, size);
+		return 0;
+	}
+
+	return ptr;
+}
+
+static irqreturn_t smsm_irq_handler(int irq, void *data)
+{
+	unsigned long flags;
+	unsigned apps, modm;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	apps = raw_smsm_get_state(SMSM_STATE_APPS);
+	modm = raw_smsm_get_state(SMSM_STATE_MODEM);
+
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("<SM %08x %08x>\n", apps, modm);
+	if (modm & SMSM_RESET)
+		handle_modem_crash();
+
+	do_smd_probe();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+	return IRQ_HANDLED;
+}
+
+int smsm_change_state(enum smsm_state_item item,
+		      uint32_t clear_mask, uint32_t set_mask)
+{
+	unsigned long addr = smd_info.state + item * 4;
+	unsigned long flags;
+	unsigned state;
+
+	if (!smd_info.ready)
+		return -EIO;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
+		handle_modem_crash();
+
+	state = (readl(addr) & ~clear_mask) | set_mask;
+	writel(state, addr);
+
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_change_state %d %x\n", item, state);
+	notify_other_smsm();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+
+	return 0;
+}
+
+uint32_t smsm_get_state(enum smsm_state_item item)
+{
+	unsigned long flags;
+	uint32_t rv;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	rv = readl(smd_info.state + item * 4);
+
+	if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET))
+		handle_modem_crash();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+
+	return rv;
+}
+
+#ifdef CONFIG_ARCH_MSM_SCORPION
+
+int smsm_set_sleep_duration(uint32_t delay)
+{
+	struct msm_dem_slave_data *ptr;
+
+	ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr));
+	if (ptr == NULL) {
+		pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n");
+		return -EIO;
+	}
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_set_sleep_duration %d -> %d\n",
+		       ptr->sleep_time, delay);
+	ptr->sleep_time = delay;
+	return 0;
+}
+
+#else
+
+int smsm_set_sleep_duration(uint32_t delay)
+{
+	uint32_t *ptr;
+
+	ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
+	if (ptr == NULL) {
+		pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n");
+		return -EIO;
+	}
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_set_sleep_duration %d -> %d\n",
+		       *ptr, delay);
+	*ptr = delay;
+	return 0;
+}
+
+#endif
+
+int smd_core_init(void)
+{
+	int r;
+	pr_info("smd_core_init()\n");
+
+	/* wait for essential items to be initialized */
+	for (;;) {
+		unsigned size;
+		void *state;
+		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
+		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
+			smd_info.state = (unsigned)state;
+			break;
+		}
+	}
+
+	smd_info.ready = 1;
+
+	r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler,
+			IRQF_TRIGGER_RISING, "smd_dev", 0);
+	if (r < 0)
+		return r;
+	r = enable_irq_wake(INT_A9_M2A_0);
+	if (r < 0)
+		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n");
+
+	r = request_irq(INT_A9_M2A_5, smsm_irq_handler,
+			IRQF_TRIGGER_RISING, "smsm_dev", 0);
+	if (r < 0) {
+		free_irq(INT_A9_M2A_0, 0);
+		return r;
+	}
+	r = enable_irq_wake(INT_A9_M2A_5);
+	if (r < 0)
+		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n");
+
+#if defined(CONFIG_QDSP6)
+	r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler,
+			IRQF_TRIGGER_RISING, "smd_dsp", 0);
+	if (r < 0) {
+		free_irq(INT_A9_M2A_0, 0);
+		free_irq(INT_A9_M2A_5, 0);
+		return r;
+	}
+#endif
+
+	/* check for any SMD channels that may already exist */
+	do_smd_probe();
+
+	/* indicate that we're up and running */
+	smsm_change_state(SMSM_STATE_APPS,
+			  ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN);
+#ifdef CONFIG_ARCH_MSM_SCORPION
+	smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
+#endif
+
+	pr_info("smd_core_init() done\n");
+
+	return 0;
+}
+
+static int __init msm_smd_probe(struct platform_device *pdev)
+{
+	pr_info("smd_init()\n");
+
+	/*
+	 * If we haven't waited for the ARM9 to boot up till now,
+	 * then we need to wait here. Otherwise this should just
+	 * return immediately.
+	 */
+	proc_comm_boot_wait();
+
+	INIT_WORK(&probe_work, smd_channel_probe_worker);
+
+	if (smd_core_init()) {
+		pr_err("smd_core_init() failed\n");
+		return -1;
+	}
+
+	do_smd_probe();
+
+	msm_check_for_modem_crash = check_for_modem_crash;
+
+	msm_init_last_radio_log(THIS_MODULE);
+
+	smd_initialized = 1;
+
+	return 0;
+}
+
+static struct platform_driver msm_smd_driver = {
+	.probe = msm_smd_probe,
+	.driver = {
+		.name = MODULE_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init msm_smd_init(void)
+{
+	return platform_driver_register(&msm_smd_driver);
+}
+
+module_init(msm_smd_init);
+
+MODULE_DESCRIPTION("MSM Shared Memory Core");
+MODULE_AUTHOR("Brian Swetland <swetland@google.com>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
new file mode 100644
index 0000000..3b2dd71
--- /dev/null
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -0,0 +1,315 @@
+/* arch/arm/mach-msm/smd_debug.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/list.h>
+
+#include <mach/msm_iomap.h>
+
+#include "smd_private.h"
+
+#if defined(CONFIG_DEBUG_FS)
+
+static char *chstate(unsigned n)
+{
+	switch (n) {
+	case SMD_SS_CLOSED:
+		return "CLOSED";
+	case SMD_SS_OPENING:
+		return "OPENING";
+	case SMD_SS_OPENED:
+		return "OPENED";
+	case SMD_SS_FLUSHING:
+		return "FLUSHING";
+	case SMD_SS_CLOSING:
+		return "CLOSING";
+	case SMD_SS_RESET:
+		return "RESET";
+	case SMD_SS_RESET_OPENING:
+		return "ROPENING";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+
+static int dump_ch(char *buf, int max, struct smd_channel *ch)
+{
+	volatile struct smd_half_channel *s = ch->send;
+	volatile struct smd_half_channel *r = ch->recv;
+
+	return scnprintf(
+		buf, max,
+		"ch%02d:"
+		" %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
+		" %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
+		chstate(s->state), s->tail, s->head,
+		s->fDSR ? 'D' : 'd',
+		s->fCTS ? 'C' : 'c',
+		s->fCD ? 'C' : 'c',
+		s->fRI ? 'I' : 'i',
+		s->fHEAD ? 'W' : 'w',
+		s->fTAIL ? 'R' : 'r',
+		s->fSTATE ? 'S' : 's',
+		chstate(r->state), r->tail, r->head,
+		r->fDSR ? 'D' : 'd',
+		r->fCTS ? 'R' : 'r',
+		r->fCD ? 'C' : 'c',
+		r->fRI ? 'I' : 'i',
+		r->fHEAD ? 'W' : 'w',
+		r->fTAIL ? 'R' : 'r',
+		r->fSTATE ? 'S' : 's',
+		ch->name
+		);
+}
+
+static int debug_read_stat(char *buf, int max)
+{
+	char *msg;
+	int i = 0;
+
+	msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
+
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
+		i += scnprintf(buf + i, max - i,
+			       "smsm: ARM9 HAS CRASHED\n");
+
+	i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
+		       raw_smsm_get_state(SMSM_STATE_MODEM),
+		       raw_smsm_get_state(SMSM_STATE_APPS));
+#ifdef CONFIG_ARCH_MSM_SCORPION
+	i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
+		       "qdsp6: %08x power: %08x time: %08x\n",
+		       raw_smsm_get_state(SMSM_STATE_APPS_DEM),
+		       raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
+		       raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
+		       raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
+		       raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
+#endif
+	if (msg) {
+		msg[SZ_DIAG_ERR_MSG - 1] = 0;
+		i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
+	}
+	return i;
+}
+
+static int debug_read_mem(char *buf, int max)
+{
+	unsigned n;
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	struct smem_heap_entry *toc = shared->heap_toc;
+	int i = 0;
+
+	i += scnprintf(buf + i, max - i,
+		       "heap: init=%d free=%d remain=%d\n",
+		       shared->heap_info.initialized,
+		       shared->heap_info.free_offset,
+		       shared->heap_info.heap_remaining);
+
+	for (n = 0; n < SMEM_NUM_ITEMS; n++) {
+		if (toc[n].allocated == 0)
+			continue;
+		i += scnprintf(buf + i, max - i,
+			       "%04d: offset %08x size %08x\n",
+			       n, toc[n].offset, toc[n].size);
+	}
+	return i;
+}
+
+static int debug_read_ch(char *buf, int max)
+{
+	struct smd_channel *ch;
+	unsigned long flags;
+	int i = 0;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	return i;
+}
+
+static int debug_read_version(char *buf, int max)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	unsigned version = shared->version[VERSION_MODEM];
+	return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
+}
+
+static int debug_read_build_id(char *buf, int max)
+{
+	unsigned size;
+	void *data;
+
+	data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
+	if (!data)
+		return 0;
+
+	if (size >= max)
+		size = max;
+	memcpy(buf, data, size);
+
+	return size;
+}
+
+static int debug_read_alloc_tbl(char *buf, int max)
+{
+	struct smd_alloc_elm *shared;
+	int n, i = 0;
+
+	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
+
+	for (n = 0; n < 64; n++) {
+		if (shared[n].ref_count == 0)
+			continue;
+		i += scnprintf(buf + i, max - i,
+			       "%03d: %-20s cid=%02d type=%03d "
+			       "kind=%02d ref_count=%d\n",
+			       n, shared[n].name, shared[n].cid,
+			       shared[n].ctype & 0xff,
+			       (shared[n].ctype >> 8) & 0xf,
+			       shared[n].ref_count);
+	}
+
+	return i;
+}
+
+#define DEBUG_BUFMAX 4096
+static char debug_buffer[DEBUG_BUFMAX];
+
+static ssize_t debug_read(struct file *file, char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	int (*fill)(char *buf, int max) = file->private_data;
+	int bsize = fill(debug_buffer, DEBUG_BUFMAX);
+	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
+}
+
+static int debug_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static const struct file_operations debug_ops = {
+	.read = debug_read,
+	.open = debug_open,
+};
+
+static void debug_create(const char *name, mode_t mode,
+			 struct dentry *dent,
+			 int (*fill)(char *buf, int max))
+{
+	debugfs_create_file(name, mode, dent, fill, &debug_ops);
+}
+
+static int smd_debugfs_init(void)
+{
+	struct dentry *dent;
+
+	dent = debugfs_create_dir("smd", 0);
+	if (IS_ERR(dent))
+		return 1;
+
+	debug_create("ch", 0444, dent, debug_read_ch);
+	debug_create("stat", 0444, dent, debug_read_stat);
+	debug_create("mem", 0444, dent, debug_read_mem);
+	debug_create("version", 0444, dent, debug_read_version);
+	debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
+	debug_create("build", 0444, dent, debug_read_build_id);
+
+	return 0;
+}
+
+late_initcall(smd_debugfs_init);
+#endif
+
+
+#define MAX_NUM_SLEEP_CLIENTS		64
+#define MAX_SLEEP_NAME_LEN		8
+
+#define NUM_GPIO_INT_REGISTERS		6
+#define GPIO_SMEM_NUM_GROUPS		2
+#define GPIO_SMEM_MAX_PC_INTERRUPTS	8
+
+struct tramp_gpio_save {
+	unsigned int enable;
+	unsigned int detect;
+	unsigned int polarity;
+};
+
+struct tramp_gpio_smem {
+	uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
+	uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
+	uint32_t enabled[NUM_GPIO_INT_REGISTERS];
+	uint32_t detection[NUM_GPIO_INT_REGISTERS];
+	uint32_t polarity[NUM_GPIO_INT_REGISTERS];
+};
+
+
+void smsm_print_sleep_info(void)
+{
+	unsigned long flags;
+	uint32_t *ptr;
+	struct tramp_gpio_smem *gpio;
+	struct smsm_interrupt_info *int_info;
+
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
+
+	ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
+
+	ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
+
+#ifndef CONFIG_ARCH_MSM_SCORPION
+	int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
+	if (int_info)
+		pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
+			int_info->interrupt_mask,
+			int_info->pending_interrupts,
+			int_info->wakeup_reason);
+
+	gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
+	if (gpio) {
+		int i;
+		for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
+			pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
+				i, gpio->enabled[i], gpio->detection[i],
+				gpio->polarity[i]);
+
+		for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
+			pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
+				i, gpio->num_fired[i], gpio->fired[i][0],
+				gpio->fired[i][1]);
+	}
+#else
+#endif
+	spin_unlock_irqrestore(&smem_lock, flags);
+}
+
diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h
new file mode 100644
index 0000000..727bfe6
--- /dev/null
+++ b/arch/arm/mach-msm/smd_private.h
@@ -0,0 +1,403 @@
+/* arch/arm/mach-msm/smd_private.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
+#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
+
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <mach/msm_iomap.h>
+
+struct smem_heap_info {
+	unsigned initialized;
+	unsigned free_offset;
+	unsigned heap_remaining;
+	unsigned reserved;
+};
+
+struct smem_heap_entry {
+	unsigned allocated;
+	unsigned offset;
+	unsigned size;
+	unsigned reserved;
+};
+
+struct smem_proc_comm {
+	unsigned command;
+	unsigned status;
+	unsigned data1;
+	unsigned data2;
+};
+
+#define PC_APPS  0
+#define PC_MODEM 1
+
+#define VERSION_SMD       0
+#define VERSION_QDSP6     4
+#define VERSION_APPS_SBL  6
+#define VERSION_MODEM_SBL 7
+#define VERSION_APPS      8
+#define VERSION_MODEM     9
+
+struct smem_shared {
+	struct smem_proc_comm proc_comm[4];
+	unsigned version[32];
+	struct smem_heap_info heap_info;
+	struct smem_heap_entry heap_toc[512];
+};
+
+#define SMSM_V1_SIZE		(sizeof(unsigned) * 8)
+#define SMSM_V2_SIZE		(sizeof(unsigned) * 4)
+
+#ifdef CONFIG_MSM_SMD_PKG3
+struct smsm_interrupt_info {
+	uint32_t interrupt_mask;
+	uint32_t pending_interrupts;
+	uint32_t wakeup_reason;
+};
+#else
+#define DEM_MAX_PORT_NAME_LEN (20)
+struct msm_dem_slave_data {
+	uint32_t sleep_time;
+	uint32_t interrupt_mask;
+	uint32_t resources_used;
+	uint32_t reserved1;
+
+	uint32_t wakeup_reason;
+	uint32_t pending_interrupts;
+	uint32_t rpc_prog;
+	uint32_t rpc_proc;
+	char     smd_port_name[DEM_MAX_PORT_NAME_LEN];
+	uint32_t reserved2;
+};
+#endif
+
+#define SZ_DIAG_ERR_MSG 0xC8
+#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
+#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
+#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
+#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
+
+#define SMSM_INIT		0x00000001
+#define SMSM_SMDINIT		0x00000008
+#define SMSM_RPCINIT		0x00000020
+#define SMSM_RESET		0x00000040
+#define SMSM_RSA		0x00000080
+#define SMSM_RUN		0x00000100
+#define SMSM_PWRC		0x00000200
+#define SMSM_TIMEWAIT		0x00000400
+#define SMSM_TIMEINIT		0x00000800
+#define SMSM_PWRC_EARLY_EXIT	0x00001000
+#define SMSM_WFPI		0x00002000
+#define SMSM_SLEEP		0x00004000
+#define SMSM_SLEEPEXIT		0x00008000
+#define SMSM_APPS_REBOOT	0x00020000
+#define SMSM_SYSTEM_POWER_DOWN	0x00040000
+#define SMSM_SYSTEM_REBOOT	0x00080000
+#define SMSM_SYSTEM_DOWNLOAD	0x00100000
+#define SMSM_PWRC_SUSPEND	0x00200000
+#define SMSM_APPS_SHUTDOWN	0x00400000
+#define SMSM_SMD_LOOPBACK	0x00800000
+#define SMSM_RUN_QUIET		0x01000000
+#define SMSM_MODEM_WAIT		0x02000000
+#define SMSM_MODEM_BREAK	0x04000000
+#define SMSM_MODEM_CONTINUE	0x08000000
+#define SMSM_UNKNOWN		0x80000000
+
+#define SMSM_WKUP_REASON_RPC	0x00000001
+#define SMSM_WKUP_REASON_INT	0x00000002
+#define SMSM_WKUP_REASON_GPIO	0x00000004
+#define SMSM_WKUP_REASON_TIMER	0x00000008
+#define SMSM_WKUP_REASON_ALARM	0x00000010
+#define SMSM_WKUP_REASON_RESET	0x00000020
+
+#ifdef CONFIG_ARCH_MSM7X00A
+enum smsm_state_item {
+	SMSM_STATE_APPS = 1,
+	SMSM_STATE_MODEM = 3,
+	SMSM_STATE_COUNT,
+};
+#else
+enum smsm_state_item {
+	SMSM_STATE_APPS,
+	SMSM_STATE_MODEM,
+	SMSM_STATE_HEXAGON,
+	SMSM_STATE_APPS_DEM,
+	SMSM_STATE_MODEM_DEM,
+	SMSM_STATE_QDSP6_DEM,
+	SMSM_STATE_POWER_MASTER_DEM,
+	SMSM_STATE_TIME_MASTER_DEM,
+	SMSM_STATE_COUNT,
+};
+#endif
+
+void *smem_alloc(unsigned id, unsigned size);
+int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
+uint32_t smsm_get_state(enum smsm_state_item item);
+int smsm_set_sleep_duration(uint32_t delay);
+void smsm_print_sleep_info(void);
+
+#define SMEM_NUM_SMD_CHANNELS        64
+
+typedef enum {
+	/* fixed items */
+	SMEM_PROC_COMM = 0,
+	SMEM_HEAP_INFO,
+	SMEM_ALLOCATION_TABLE,
+	SMEM_VERSION_INFO,
+	SMEM_HW_RESET_DETECT,
+	SMEM_AARM_WARM_BOOT,
+	SMEM_DIAG_ERR_MESSAGE,
+	SMEM_SPINLOCK_ARRAY,
+	SMEM_MEMORY_BARRIER_LOCATION,
+
+	/* dynamic items */
+	SMEM_AARM_PARTITION_TABLE,
+	SMEM_AARM_BAD_BLOCK_TABLE,
+	SMEM_RESERVE_BAD_BLOCKS,
+	SMEM_WM_UUID,
+	SMEM_CHANNEL_ALLOC_TBL,
+	SMEM_SMD_BASE_ID,
+	SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SMEM_LOG_EVENTS,
+	SMEM_SMEM_STATIC_LOG_IDX,
+	SMEM_SMEM_STATIC_LOG_EVENTS,
+	SMEM_SMEM_SLOW_CLOCK_SYNC,
+	SMEM_SMEM_SLOW_CLOCK_VALUE,
+	SMEM_BIO_LED_BUF,
+	SMEM_SMSM_SHARED_STATE,
+	SMEM_SMSM_INT_INFO,
+	SMEM_SMSM_SLEEP_DELAY,
+	SMEM_SMSM_LIMIT_SLEEP,
+	SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
+	SMEM_KEYPAD_KEYS_PRESSED,
+	SMEM_KEYPAD_STATE_UPDATED,
+	SMEM_KEYPAD_STATE_IDX,
+	SMEM_GPIO_INT,
+	SMEM_MDDI_LCD_IDX,
+	SMEM_MDDI_HOST_DRIVER_STATE,
+	SMEM_MDDI_LCD_DISP_STATE,
+	SMEM_LCD_CUR_PANEL,
+	SMEM_MARM_BOOT_SEGMENT_INFO,
+	SMEM_AARM_BOOT_SEGMENT_INFO,
+	SMEM_SLEEP_STATIC,
+	SMEM_SCORPION_FREQUENCY,
+	SMEM_SMD_PROFILES,
+	SMEM_TSSC_BUSY,
+	SMEM_HS_SUSPEND_FILTER_INFO,
+	SMEM_BATT_INFO,
+	SMEM_APPS_BOOT_MODE,
+	SMEM_VERSION_FIRST,
+	SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
+	SMEM_OSS_RRCASN1_BUF1,
+	SMEM_OSS_RRCASN1_BUF2,
+	SMEM_ID_VENDOR0,
+	SMEM_ID_VENDOR1,
+	SMEM_ID_VENDOR2,
+	SMEM_HW_SW_BUILD_ID,
+	SMEM_SMD_BLOCK_PORT_BASE_ID,
+	SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
+	SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SCLK_CONVERSION,
+	SMEM_SMD_SMSM_INTR_MUX,
+	SMEM_SMSM_CPU_INTR_MASK,
+	SMEM_APPS_DEM_SLAVE_DATA,
+	SMEM_QDSP6_DEM_SLAVE_DATA,
+	SMEM_CLKREGIM_BSP,
+	SMEM_CLKREGIM_SOURCES,
+	SMEM_SMD_FIFO_BASE_ID,
+	SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_POWER_ON_STATUS_INFO,
+	SMEM_DAL_AREA,
+	SMEM_SMEM_LOG_POWER_IDX,
+	SMEM_SMEM_LOG_POWER_WRAP,
+	SMEM_SMEM_LOG_POWER_EVENTS,
+	SMEM_ERR_CRASH_LOG,
+	SMEM_ERR_F3_TRACE_LOG,
+	SMEM_NUM_ITEMS,
+} smem_mem_type;
+
+
+#define SMD_SS_CLOSED		0x00000000
+#define SMD_SS_OPENING		0x00000001
+#define SMD_SS_OPENED		0x00000002
+#define SMD_SS_FLUSHING		0x00000003
+#define SMD_SS_CLOSING		0x00000004
+#define SMD_SS_RESET		0x00000005
+#define SMD_SS_RESET_OPENING	0x00000006
+
+#define SMD_BUF_SIZE		8192
+#define SMD_CHANNELS		64
+
+#define SMD_HEADER_SIZE		20
+
+struct smd_alloc_elm {
+	char name[20];
+	uint32_t cid;
+	uint32_t ctype;
+	uint32_t ref_count;
+};
+
+struct smd_half_channel {
+	unsigned state;
+	unsigned char fDSR;
+	unsigned char fCTS;
+	unsigned char fCD;
+	unsigned char fRI;
+	unsigned char fHEAD;
+	unsigned char fTAIL;
+	unsigned char fSTATE;
+	unsigned char fUNUSED;
+	unsigned tail;
+	unsigned head;
+} __attribute__(( aligned(4), packed ));
+
+/* Only used on SMD package v3 on msm7201a */
+struct smd_shared_v1 {
+	struct smd_half_channel ch0;
+	unsigned char data0[SMD_BUF_SIZE];
+	struct smd_half_channel ch1;
+	unsigned char data1[SMD_BUF_SIZE];
+};
+
+/* Used on SMD package v4 */
+struct smd_shared_v2 {
+	struct smd_half_channel ch0;
+	struct smd_half_channel ch1;
+};
+
+struct smd_channel {
+	volatile struct smd_half_channel *send;
+	volatile struct smd_half_channel *recv;
+	unsigned char *send_data;
+	unsigned char *recv_data;
+
+	unsigned fifo_mask;
+	unsigned fifo_size;
+	unsigned current_packet;
+	unsigned n;
+
+	struct list_head ch_list;
+
+	void *priv;
+	void (*notify)(void *priv, unsigned flags);
+
+	int (*read)(struct smd_channel *ch, void *data, int len);
+	int (*write)(struct smd_channel *ch, const void *data, int len);
+	int (*read_avail)(struct smd_channel *ch);
+	int (*write_avail)(struct smd_channel *ch);
+
+	void (*update_state)(struct smd_channel *ch);
+	unsigned last_state;
+	void (*notify_other_cpu)(void);
+	unsigned type;
+
+	char name[32];
+	struct platform_device pdev;
+};
+
+#define SMD_TYPE_MASK		0x0FF
+#define SMD_TYPE_APPS_MODEM	0x000
+#define SMD_TYPE_APPS_DSP	0x001
+#define SMD_TYPE_MODEM_DSP	0x002
+
+#define SMD_KIND_MASK		0xF00
+#define SMD_KIND_UNKNOWN	0x000
+#define SMD_KIND_STREAM		0x100
+#define SMD_KIND_PACKET		0x200
+
+extern struct list_head smd_ch_closed_list;
+extern struct list_head smd_ch_list_modem;
+extern struct list_head smd_ch_list_dsp;
+
+extern spinlock_t smd_lock;
+extern spinlock_t smem_lock;
+
+void *smem_find(unsigned id, unsigned size);
+void *smem_item(unsigned id, unsigned *size);
+uint32_t raw_smsm_get_state(enum smsm_state_item item);
+
+extern void msm_init_last_radio_log(struct module *);
+
+#ifdef CONFIG_MSM_SMD_PKG3
+/*
+ * This allocator assumes an SMD Package v3 which only exists on
+ * MSM7x00 SoC's.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v1 *shared1;
+
+	shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
+	if (!shared1) {
+		pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
+		return -1;
+	}
+	ch->send = &shared1->ch0;
+	ch->recv = &shared1->ch1;
+	ch->send_data = shared1->data0;
+	ch->recv_data = shared1->data1;
+	ch->fifo_size = SMD_BUF_SIZE;
+	return 0;
+}
+#else
+/*
+ * This allocator assumes an SMD Package v4, the most common
+ * and the default.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v2 *shared2;
+	void *buffer;
+	unsigned buffer_sz;
+
+	shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
+	buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
+
+	if (!buffer)
+		return -1;
+
+	/* buffer must be a power-of-two size */
+	if (buffer_sz & (buffer_sz - 1))
+		return -1;
+
+	buffer_sz /= 2;
+	ch->send = &shared2->ch0;
+	ch->recv = &shared2->ch1;
+	ch->send_data = buffer;
+	ch->recv_data = buffer + buffer_sz;
+	ch->fifo_size = buffer_sz;
+	return 0;
+}
+#endif /* CONFIG_MSM_SMD_PKG3 */
+
+#if defined(CONFIG_ARCH_MSM7X30)
+static inline void msm_a2m_int(uint32_t irq)
+{
+	writel(1 << irq, MSM_GCC_BASE + 0x8);
+}
+#else
+static inline void msm_a2m_int(uint32_t irq)
+{
+	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
+}
+#endif /* CONFIG_ARCH_MSM7X30 */
+
+
+#endif
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 4855b8c..dec5ca6 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -25,7 +25,9 @@
 #include <asm/mach/time.h>
 #include <mach/msm_iomap.h>
 
+#ifndef MSM_DGT_BASE
 #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
+#endif
 #define MSM_DGT_SHIFT (5)
 
 #define TIMER_MATCH_VAL         0x0000
diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c
index fcb0b9f..a9103bc 100644
--- a/arch/arm/mach-msm/vreg.c
+++ b/arch/arm/mach-msm/vreg.c
@@ -1,6 +1,7 @@
 /* arch/arm/mach-msm/vreg.c
  *
  * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -18,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
+#include <linux/string.h>
 #include <mach/vreg.h>
 
 #include "proc_comm.h"
@@ -25,42 +27,62 @@
 struct vreg {
 	const char *name;
 	unsigned id;
+	int status;
+	unsigned refcnt;
 };
 
-#define VREG(_name, _id) { .name = _name, .id = _id, }
+#define VREG(_name, _id, _status, _refcnt) \
+	{ .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
 
 static struct vreg vregs[] = {
-	VREG("msma",	0),
-	VREG("msmp",	1),
-	VREG("msme1",	2),
-	VREG("msmc1",	3),
-	VREG("msmc2",	4),
-	VREG("gp3",	5),
-	VREG("msme2",	6),
-	VREG("gp4",	7),
-	VREG("gp1",	8),
-	VREG("tcxo",	9),
-	VREG("pa",	10),
-	VREG("rftx",	11),
-	VREG("rfrx1",	12),
-	VREG("rfrx2",	13),
-	VREG("synt",	14),
-	VREG("wlan",	15),
-	VREG("usb",	16),
-	VREG("boost",	17),
-	VREG("mmc",	18),
-	VREG("ruim",	19),
-	VREG("msmc0",	20),
-	VREG("gp2",	21),
-	VREG("gp5",	22),
-	VREG("gp6",	23),
-	VREG("rf",	24),
-	VREG("rf_vco",	26),
-	VREG("mpll",	27),
-	VREG("s2",	28),
-	VREG("s3",	29),
-	VREG("rfubm",	30),
-	VREG("ncp",	31),
+	VREG("msma",	0, 0, 0),
+	VREG("msmp",	1, 0, 0),
+	VREG("msme1",	2, 0, 0),
+	VREG("msmc1",	3, 0, 0),
+	VREG("msmc2",	4, 0, 0),
+	VREG("gp3",	5, 0, 0),
+	VREG("msme2",	6, 0, 0),
+	VREG("gp4",	7, 0, 0),
+	VREG("gp1",	8, 0, 0),
+	VREG("tcxo",	9, 0, 0),
+	VREG("pa",	10, 0, 0),
+	VREG("rftx",	11, 0, 0),
+	VREG("rfrx1",	12, 0, 0),
+	VREG("rfrx2",	13, 0, 0),
+	VREG("synt",	14, 0, 0),
+	VREG("wlan",	15, 0, 0),
+	VREG("usb",	16, 0, 0),
+	VREG("boost",	17, 0, 0),
+	VREG("mmc",	18, 0, 0),
+	VREG("ruim",	19, 0, 0),
+	VREG("msmc0",	20, 0, 0),
+	VREG("gp2",	21, 0, 0),
+	VREG("gp5",	22, 0, 0),
+	VREG("gp6",	23, 0, 0),
+	VREG("rf",	24, 0, 0),
+	VREG("rf_vco",	26, 0, 0),
+	VREG("mpll",	27, 0, 0),
+	VREG("s2",	28, 0, 0),
+	VREG("s3",	29, 0, 0),
+	VREG("rfubm",	30, 0, 0),
+	VREG("ncp",	31, 0, 0),
+	VREG("gp7",	32, 0, 0),
+	VREG("gp8",	33, 0, 0),
+	VREG("gp9",	34, 0, 0),
+	VREG("gp10",	35, 0, 0),
+	VREG("gp11",	36, 0, 0),
+	VREG("gp12",	37, 0, 0),
+	VREG("gp13",	38, 0, 0),
+	VREG("gp14",	39, 0, 0),
+	VREG("gp15",	40, 0, 0),
+	VREG("gp16",	41, 0, 0),
+	VREG("gp17",	42, 0, 0),
+	VREG("s4",	43, 0, 0),
+	VREG("usb2",	44, 0, 0),
+	VREG("wlan2",	45, 0, 0),
+	VREG("xo_out",	46, 0, 0),
+	VREG("lvsw0",	47, 0, 0),
+	VREG("lvsw1",	48, 0, 0),
 };
 
 struct vreg *vreg_get(struct device *dev, const char *id)
@@ -70,7 +92,7 @@ struct vreg *vreg_get(struct device *dev, const char *id)
 		if (!strcmp(vregs[n].name, id))
 			return vregs + n;
 	}
-	return 0;
+	return ERR_PTR(-ENOENT);
 }
 
 void vreg_put(struct vreg *vreg)
@@ -81,20 +103,39 @@ int vreg_enable(struct vreg *vreg)
 {
 	unsigned id = vreg->id;
 	unsigned enable = 1;
-	return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (vreg->refcnt == 0)
+		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
+		vreg->refcnt++;
+
+	return vreg->status;
 }
 
-void vreg_disable(struct vreg *vreg)
+int vreg_disable(struct vreg *vreg)
 {
 	unsigned id = vreg->id;
 	unsigned enable = 0;
-	msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (!vreg->refcnt)
+		return 0;
+
+	if (vreg->refcnt == 1)
+		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (!vreg->status)
+		vreg->refcnt--;
+
+	return vreg->status;
 }
 
 int vreg_set_level(struct vreg *vreg, unsigned mv)
 {
 	unsigned id = vreg->id;
-	return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+
+	vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+	return vreg->status;
 }
 
 #if defined(CONFIG_DEBUG_FS)
@@ -118,24 +159,59 @@ static int vreg_debug_set(void *data, u64 val)
 
 static int vreg_debug_get(void *data, u64 *val)
 {
-	return -ENOSYS;
+	struct vreg *vreg = data;
+
+	if (!vreg->status)
+		*val = 0;
+	else
+		*val = 1;
+
+	return 0;
+}
+
+static int vreg_debug_count_set(void *data, u64 val)
+{
+	struct vreg *vreg = data;
+	if (val > UINT_MAX)
+		val = UINT_MAX;
+	vreg->refcnt = val;
+	return 0;
+}
+
+static int vreg_debug_count_get(void *data, u64 *val)
+{
+	struct vreg *vreg = data;
+
+	*val = vreg->refcnt;
+
+	return 0;
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
+			vreg_debug_count_set, "%llu\n");
 
 static int __init vreg_debug_init(void)
 {
 	struct dentry *dent;
 	int n;
+	char name[32];
+	const char *refcnt_name = "_refcnt";
 
 	dent = debugfs_create_dir("vreg", 0);
 	if (IS_ERR(dent))
 		return 0;
 
-	for (n = 0; n < ARRAY_SIZE(vregs); n++)
+	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
 		(void) debugfs_create_file(vregs[n].name, 0644,
 					   dent, vregs + n, &vreg_fops);
 
+		strlcpy(name, vregs[n].name, sizeof(name));
+		strlcat(name, refcnt_name, sizeof(name));
+		(void) debugfs_create_file(name, 0644,
+					   dent, vregs + n, &vreg_count_fops);
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 6fbe68f..f2d309d 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -14,6 +14,12 @@ config MACH_RD78X00_MASA
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-78x00-mASA Reference Design.
 
+config MACH_TERASTATION_WXL
+	bool "Buffalo WLX (Terastation Duo) NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo WXL Nas.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index da628b7..67a13f9 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 0000000..61e5e58
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+	MPP0_GE1_TXCLK,
+	MPP1_GE1_TXCTL,
+	MPP2_GE1_RXCTL,
+	MPP3_GE1_RXCLK,
+	MPP4_GE1_TXD0,
+	MPP5_GE1_TXD1,
+	MPP6_GE1_TXD2,
+	MPP7_GE1_TXD3,
+	MPP8_GE1_RXD0,
+	MPP9_GE1_RXD1,
+	MPP10_GE1_RXD2,
+	MPP11_GE1_RXD3,
+	MPP12_GPIO,
+	MPP13_SYSRST_OUTn,
+	MPP14_SATA1_ACTn,
+	MPP15_SATA0_ACTn,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_GPIO,
+	MPP19_GPIO,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_UA2_TXD,
+	MPP25_UA2_RXD,
+	MPP26_UA2_CTSn,
+	MPP27_UA2_RTSn,
+	MPP28_GPIO,
+	MPP29_SYSRST_OUTn,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,
+	MPP35_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	MPP39_GPIO,
+	MPP40_UNUSED,
+	MPP41_UNUSED,
+	MPP42_UNUSED,
+	MPP43_UNUSED,
+	MPP44_UNUSED,
+	MPP45_UNUSED,
+	MPP46_UNUSED,
+	MPP47_UNUSED,
+	MPP48_SATA1_ACTn,
+	MPP49_SATA0_ACTn,
+	0
+};
+
+
+static void __init wxl_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+	mv78xx0_mpp_conf(wxl_mpp_config);
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	mv78xx0_ehci0_init();
+	mv78xx0_ehci1_init();
+	mv78xx0_ehci2_init();
+	mv78xx0_ge00_init(&db78x00_ge00_data);
+	mv78xx0_ge01_init(&db78x00_ge01_data);
+	mv78xx0_sata_init(&db78x00_sata_data);
+	mv78xx0_uart0_init();
+	mv78xx0_uart1_init();
+	mv78xx0_uart2_init();
+	mv78xx0_uart3_init();
+	mv78xx0_i2c_init();
+	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+	if (machine_is_terastation_wxl()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+	.phys_io	= MV78XX0_REGS_PHYS_BASE,
+	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= wxl_init,
+	.map_io		= mv78xx0_map_io,
+	.init_irq	= mv78xx0_init_irq,
+	.timer		= &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index a06442f..cd81689 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
index 1c49543..ba26fe9 100644
--- a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END	0xfe000000
+#define VMALLOC_END	0xfe000000UL
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 0000000..354ac51
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+		return MPP_78100_A0_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+#define MPP_CTRL(i)	(DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS	(1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	unsigned int variant_mask;
+	int i;
+
+	variant_mask = mv78xx0_variant();
+	if (!variant_mask)
+		return;
+
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
+	printk(KERN_DEBUG "initial MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+
+	while (*mpp_list) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+					"number (%u)\n", num);
+			continue;
+		}
+		if (!(*mpp_list & variant_mask)) {
+			printk(KERN_WARNING
+					"mv78xx0_mpp_conf: requested MPP%u config "
+					"unavailable on this hardware\n", num);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		mpp_ctrl[num / 8] &= ~(0xf << shift);
+		mpp_ctrl[num / 8] |= sel << shift;
+
+		gpio_mode = 0;
+		if (*mpp_list & MPP_INPUT_MASK)
+			gpio_mode |= GPIO_INPUT_OK;
+		if (*mpp_list & MPP_OUTPUT_MASK)
+			gpio_mode |= GPIO_OUTPUT_OK;
+		if (sel != 0)
+			gpio_mode = 0;
+		orion_gpio_set_valid(num, gpio_mode);
+
+		mpp_list++;
+	}
+
+	printk(KERN_DEBUG "  final MPP regs:");
+	for (i = 0; i < MPP_NR_REGS; i++) {
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+		printk(" %08x", mpp_ctrl[i]);
+	}
+	printk("\n");
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 0000000..80840b7
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+    /* MPP number */        ((_num) & 0xff) | \
+    /* MPP select value */        (((_sel) & 0xf) << 8) | \
+    /* may be input signal */    ((!!(_in)) << 12) | \
+    /* may be output signal */    ((!!(_out)) << 13) | \
+    /* available on A0 */    ((!!(_78100_A0)) << 14))
+
+#define MPP_NUM(x)    ((x) & 0xff)
+#define MPP_SEL(x)    (((x) >> 8) & 0xf)
+
+                /*   num sel  i  o  78100_A0  */
+
+#define MPP_INPUT_MASK        MPP(0, 0x0, 1, 0, 0)
+#define MPP_OUTPUT_MASK        MPP(0, 0x0, 0, 1, 0)
+
+#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX            49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 7f86fe0..fc2ddf8 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y			+= generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index d1b5885..6cf2d4a 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -570,7 +570,6 @@ static struct clk_lookup lookups[] __initdata = {
 int __init mx1_clocks_init(unsigned long fref)
 {
 	unsigned int reg;
-	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -592,8 +591,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
new file mode 100644
index 0000000..51f3cfd
--- /dev/null
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-imx/mach-mx1ads.c
+ *
+ * Initially based on:
+ *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1.h>
+#include <mach/irqs.h>
+
+#include "devices.h"
+
+static int mx1ads_pins[] = {
+	/* UART1 */
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+	/* UART2 */
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+	/* I2C */
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+	/* SPI */
+	PC13_PF_SPI1_SPI_RDY,
+	PC14_PF_SPI1_SCLK,
+	PC15_PF_SPI1_SS,
+	PC16_PF_SPI1_MISO,
+	PC17_PF_SPI1_MOSI,
+};
+
+/*
+ * UARTs platform data
+ */
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+	.width		= 4,		/* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * I2C
+ */
+static struct pcf857x_platform_data pcf857x_data[] = {
+	{
+		.gpio_base = 4 * 32,
+	}, {
+		.gpio_base = 4 * 32 + 16,
+	}
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x22),
+		.platform_data = &pcf857x_data[0],
+	}, {
+		I2C_BOARD_INFO("pcf8575", 0x24),
+		.platform_data = &pcf857x_data[1],
+	},
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx1ads_pins,
+		ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
+	/* UART */
+	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+
+	/* Physmap flash */
+	mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+	/* I2C */
+	i2c_register_board_info(0, mx1ads_i2c_devices,
+				ARRAY_SIZE(mx1ads_i2c_devices));
+
+	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+struct sys_timer mx1ads_timer = {
+	.init	= mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+	/* Maintainer: Sascha Hauer, Pengutronix */
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
new file mode 100644
index 0000000..7587a7a
--- /dev/null
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &scb_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+	{
+		.name	= "address area",
+		.start	= IMX_CS5_PHYS,
+		.end	= IMX_CS5_PHYS + 1,
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
+		.name	= "data area",
+		.start	= IMX_CS5_PHYS + 4,
+		.end	= IMX_CS5_PHYS + 5,
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
+		.start	= IRQ_GPIOC(3),
+		.end	= IRQ_GPIOC(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000x_resources),
+	.resource	= dm9000x_resources,
+	.dev		= {
+		.platform_data = &dm9000_platdata,
+	}
+};
+
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+	.init = uart1_mxc_init,
+	.exit = uart1_mxc_exit,
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&scb_flash_device,
+	&dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+	mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+	printk(KERN_INFO"Scb9328: Adding devices\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+	.init	= scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mx1_map_io,
+	.init_irq	= mx1_init_irq,
+	.timer		= &scb9328_timer,
+	.init_machine	= scb9328_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
deleted file mode 100644
index 30f04e5..0000000
--- a/arch/arm/mach-mx1/mx1ads.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/irqs.h>
-
-#include "devices.h"
-
-static int mx1ads_pins[] = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-	/* SPI */
-	PC13_PF_SPI1_SPI_RDY,
-	PC14_PF_SPI1_SCLK,
-	PC15_PF_SPI1_SS,
-	PC16_PF_SPI1_MISO,
-	PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-/*
- * Physmap flash
- */
-
-static struct physmap_flash_data mx1ads_flash_data = {
-	.width		= 4,		/* bankwidth in bytes */
-};
-
-static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
-	{
-		.gpio_base = 4 * 32,
-	}, {
-		.gpio_base = 4 * 32 + 16,
-	}
-};
-
-static struct imxi2c_platform_data mx1ads_i2c_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x22),
-		.platform_data = &pcf857x_data[0],
-	}, {
-		I2C_BOARD_INFO("pcf8575", 0x24),
-		.platform_data = &pcf857x_data[1],
-	},
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx1ads_pins,
-		ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
-	/* UART */
-	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
-	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
-
-	/* Physmap flash */
-	mxc_register_device(&flash_device, &mx1ads_flash_data);
-
-	/* I2C */
-	i2c_register_board_info(0, mx1ads_i2c_devices,
-				ARRAY_SIZE(mx1ads_i2c_devices));
-
-	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-struct sys_timer mx1ads_timer = {
-	.init	= mx1ads_timer_init,
-};
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &mx1ads_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &mx1ads_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
deleted file mode 100644
index 325d98d..0000000
--- a/arch/arm/mach-mx1/scb9328.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/arm/mach-mx1/scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-
-#include "devices.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= IMX_CS5_PHYS,
-		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= IMX_CS5_PHYS + 4,
-		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		.start	= IRQ_GPIOC(3),
-		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
-	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
-}
-
-static struct imxuart_platform_data uart_pdata = {
-	.init = uart1_mxc_init,
-	.exit = uart1_mxc_exit,
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	mxc_register_device(&imx_uart1_device, &uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-static struct sys_timer scb9328_timer = {
-	.init	= scb9328_timer_init,
-};
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-    /* Sascha Hauer */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1_map_io,
-	.init_irq	= mx1_init_irq,
-	.timer		= &scb9328_timer,
-	.init_machine	= scb9328_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index b96c6a3..742fd4e 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -37,6 +37,7 @@ config MACH_MX27ADS
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
 	depends on MACH_MX27
 	help
@@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@ config MACH_MX27_3DS
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	depends on MACH_MX27
 	help
@@ -100,6 +101,7 @@ config MACH_MX27LITE
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 52aca0a..e3254fa 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,21 +4,20 @@
 
 # Object file lists.
 
-obj-y	:=  generic.o devices.o serial.o
+obj-y	:=  devices.o serial.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 91901b5..bb419ef 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -968,7 +1199,6 @@ static struct clk_lookup lookups[] = {
  */
 int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 {
-	int i;
 	u32 cscr;
 
 	external_low_reference = lref;
@@ -986,8 +1216,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	else
 		spll_clk.parent = &fpm_clk;
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	/* Turn off all clock gates */
 	__raw_writel(0, CCM_PCCR0);
@@ -1004,6 +1233,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index b010bf9..0f0823c 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS	(1 << 31)
 #define CCM_CSCR_SSI2		(1 << 23)
@@ -719,7 +721,6 @@ static void __init to2_adjust_clocks(void)
 int __init mx27_clocks_init(unsigned long fref)
 {
 	u32 cscr = __raw_readl(CCM_CSCR);
-	int i;
 
 	external_high_reference = fref;
 
@@ -736,8 +737,7 @@ int __init mx27_clocks_init(unsigned long fref)
 
 	to2_adjust_clocks();
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	/* Turn off all clocks we do not need */
 	__raw_writel(0, CCM_PCCR0);
@@ -755,7 +755,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9..d8d3b2d 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 749de76..0000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET   29
-#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES        (1 << 22)
-#define CCM_CSCR_MPLLRES        (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET    20
-#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET    19
-#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET    	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET   9
-#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET       	31
-#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET       	30
-#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET      	28
-#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
-#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
-#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
-#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET    	23
-#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET        	22
-#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET          	21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET       20
-#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET           	18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
-#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
-#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET           	15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET         	14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET            	13
-#define CCM_PCCR_DMA_REG            	CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET           	12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET           	11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET          	10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET          	9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET       	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET       	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET          	3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET          	2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET          	1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET          	0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET          	31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET            	30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET            	29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET            	28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET           	27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET           	26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET           	25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET            	24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR          (1 << 15)
-
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3d398ce..a0aeb8a 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -46,65 +47,31 @@
  * - i.MX21: 2 channel
  * - i.MX27: 3 channel
  */
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
+#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
+	static struct resource mxc_spi_resources ## n[] = {			\
+		{								\
+			.start = baseaddr,					\
+			.end = baseaddr + SZ_4K - 1,				\
+			.flags = IORESOURCE_MEM,				\
+		}, {								\
+			.start = irq,						\
+			.end = irq,						\
+			.flags = IORESOURCE_IRQ,				\
+		},								\
+	};									\
+										\
+	struct platform_device mxc_spi_device ## n = {				\
+		.name = "spi_imx",						\
+		.id = n,							\
+		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
+		.resource = mxc_spi_resources ## n,				\
+	}
 
-static struct resource mxc_spi_resources1[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
+DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
+DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_spi_resources2[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-#endif
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
-
-#ifdef CONFIG_MACH_MX27
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
+DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
 #endif
 
 /*
@@ -112,122 +79,47 @@ struct platform_device mxc_spi_device2 = {
  * - i.MX21: 3 timers
  * - i.MX27: 6 timers
  */
-
-/* We use gpt0 as system timer, so do not add a device for this one */
-
-static struct resource timer1_resources[] = {
-	{
-		.start	= GPT2_BASE_ADDR,
-		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT2,
-		.end     = MXC_INT_GPT2,
-		.flags   = IORESOURCE_IRQ,
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
+	static struct resource timer ## n ##_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_gpt ## n = {				\
+		.name = "imx_gpt",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
+		.resource = timer ## n ## _resources,			\
 	}
-};
 
-struct platform_device mxc_gpt1 = {
-	.name = "imx_gpt",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources,
-};
-
-static struct resource timer2_resources[] = {
-	{
-		.start	= GPT3_BASE_ADDR,
-		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT3,
-		.end     = MXC_INT_GPT3,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt2 = {
-	.name = "imx_gpt",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources,
-};
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource timer3_resources[] = {
-	{
-		.start	= GPT4_BASE_ADDR,
-		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT4,
-		.end     = MXC_INT_GPT4,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt3 = {
-	.name = "imx_gpt",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources,
-};
-
-static struct resource timer4_resources[] = {
-	{
-		.start	= GPT5_BASE_ADDR,
-		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT5,
-		.end     = MXC_INT_GPT5,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt4 = {
-	.name = "imx_gpt",
-	.id = 4,
-	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources,
-};
-
-static struct resource timer5_resources[] = {
-	{
-		.start	= GPT6_BASE_ADDR,
-		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = MXC_INT_GPT6,
-		.end     = MXC_INT_GPT6,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_gpt5 = {
-	.name = "imx_gpt",
-	.id = 5,
-	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources,
-};
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
 #endif
 
-/*
- * Watchdog:
- * - i.MX1
- * - i.MX21
- * - i.MX27
- */
+/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
 static struct resource mxc_wdt_resources[] = {
 	{
-		.start	= WDOG_BASE_ADDR,
-		.end	= WDOG_BASE_ADDR + 0x30,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_WDOG_BASE_ADDR,
+		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	},
 };
 
 struct platform_device mxc_wdt = {
-	.name = "mxc_wdt",
+	.name = "imx2-wdt",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
 	.resource = mxc_wdt_resources,
@@ -235,8 +127,8 @@ struct platform_device mxc_wdt = {
 
 static struct resource mxc_w1_master_resources[] = {
 	{
-		.start = OWIRE_BASE_ADDR,
-		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+		.start = MX2x_OWIRE_BASE_ADDR,
+		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -248,24 +140,33 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= NFC_BASE_ADDR,
-		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
+#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
+	static struct resource pfx ## _nand_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+	};								\
+									\
+	struct platform_device pfx ## _nand_device = {			\
+		.name = "mxc_nand",					\
+		.id = 0,						\
+		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
+		.resource = pfx ## _nand_resources,			\
+	}
 
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
+#endif
 
 /*
  * lcdc:
@@ -275,12 +176,12 @@ struct platform_device mxc_nand_device = {
  */
 static struct resource mxc_fb[] = {
 	{
-		.start = LCDC_BASE_ADDR,
-		.end   = LCDC_BASE_ADDR + 0xFFF,
+		.start = MX2x_LCDC_BASE_ADDR,
+		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_LCDC,
-		.end   = MXC_INT_LCDC,
+		.start = MX2x_INT_LCDC,
+		.end = MX2x_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
 	}
 };
@@ -292,20 +193,20 @@ struct platform_device mxc_fb_device = {
 	.num_resources = ARRAY_SIZE(mxc_fb),
 	.resource = mxc_fb,
 	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {
 	{
-		.start	= FEC_BASE_ADDR,
-		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_FEC_BASE_ADDR,
+		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_FEC,
-		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_FEC,
+		.end = MX27_INT_FEC,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
@@ -317,55 +218,41 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= I2C_BASE_ADDR,
-		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C,
-		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ,
+#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
+	static struct resource mxc_i2c_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_i2c_device ## n = {			\
+		.name = "imx-i2c",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
+		.resource = mxc_i2c_resources ## n,			\
 	}
-};
 
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
+DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= I2C2_BASE_ADDR,
-		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_I2C2,
-		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
+DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
 #endif
 
 static struct resource mxc_pwm_resources[] = {
 	{
-		.start	= PWM_BASE_ADDR,
-		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX2x_PWM_BASE_ADDR,
+		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start   = MXC_INT_PWM,
-		.end     = MXC_INT_PWM,
-		.flags   = IORESOURCE_IRQ,
+		.start = MX2x_INT_PWM,
+		.end = MX2x_INT_PWM,
+		.flags = IORESOURCE_IRQ,
 	}
 };
 
@@ -376,81 +263,53 @@ struct platform_device mxc_pwm_device = {
 	.resource = mxc_pwm_resources,
 };
 
-/*
- * Resource definition for the MXC SDHC
- */
-static struct resource mxc_sdhc1_resources[] = {
-	{
-		.start = SDHC1_BASE_ADDR,
-		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC1,
-		.end   = MXC_INT_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC1,
-		.end    = DMA_REQ_SDHC1,
-		.flags  = IORESOURCE_DMA,
-	},
-};
-
-static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
-
-struct platform_device mxc_sdhc_device0 = {
-       .name           = "mxc-mmc",
-       .id             = 0,
-       .dev            = {
-               .dma_mask = &mxc_sdhc1_dmamask,
-               .coherent_dma_mask = 0xffffffff,
-       },
-       .num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
-       .resource       = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_sdhc2_resources[] = {
-	{
-		.start = SDHC2_BASE_ADDR,
-		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_SDHC2,
-		.end   = MXC_INT_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start  = DMA_REQ_SDHC2,
-		.end    = DMA_REQ_SDHC2,
-		.flags  = IORESOURCE_DMA,
-	},
-};
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
+	static struct resource mxc_sdhc_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}, {							\
+			.start = dmareq,				\
+			.end = dmareq,					\
+			.flags = IORESOURCE_DMA,			\
+		},							\
+	};								\
+									\
+	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
+									\
+	struct platform_device mxc_sdhc_device ## n = {			\
+		.name = "mxc-mmc",					\
+		.id = n,						\
+		.dev = {						\
+			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
+			.coherent_dma_mask = DMA_BIT_MASK(32),		\
+		},							\
+		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
+		.resource = mxc_sdhc_resources ## n,		\
+	}
 
-static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
-
-struct platform_device mxc_sdhc_device1 = {
-       .name           = "mxc-mmc",
-       .id             = 1,
-       .dev            = {
-               .dma_mask = &mxc_sdhc2_dmamask,
-               .coherent_dma_mask = 0xffffffff,
-       },
-       .num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
-       .resource       = mxc_sdhc2_resources,
-};
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
 
 #ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
-		.flags	= IORESOURCE_MEM,
+		.start = MX27_USBOTG_BASE_ADDR,
+		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
 	}, {
-		.start	= MXC_INT_USB3,
-		.end	= MXC_INT_USB3,
-		.flags	= IORESOURCE_IRQ,
+		.start = MX27_INT_USB3,
+		.end = MX27_INT_USB3,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
-static u64 otg_dmamask = 0xffffffffUL;
+static u64 otg_dmamask = DMA_BIT_MASK(32);
 
 /* OTG gadget device */
 struct platform_device mxc_otg_udc_device = {
@@ -458,7 +317,7 @@ struct platform_device mxc_otg_udc_device = {
 	.id		= -1,
 	.dev		= {
 		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= 0xffffffffUL,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.resource	= otg_resources,
 	.num_resources	= ARRAY_SIZE(otg_resources),
@@ -469,7 +328,7 @@ struct platform_device mxc_otg_host = {
 	.name = "mxc-ehci",
 	.id = 0,
 	.dev = {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.dma_mask = &otg_dmamask,
 	},
 	.resource = otg_resources,
@@ -478,16 +337,16 @@ struct platform_device mxc_otg_host = {
 
 /* USB host 1 */
 
-static u64 usbh1_dmamask = 0xffffffffUL;
+static u64 usbh1_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x200,
+		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB1,
-		.end = MXC_INT_USB1,
+		.start = MX27_INT_USB1,
+		.end = MX27_INT_USB1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -496,7 +355,7 @@ struct platform_device mxc_usbh1 = {
 	.name = "mxc-ehci",
 	.id = 1,
 	.dev = {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.dma_mask = &usbh1_dmamask,
 	},
 	.resource = mxc_usbh1_resources,
@@ -504,16 +363,16 @@ struct platform_device mxc_usbh1 = {
 };
 
 /* USB host 2 */
-static u64 usbh2_dmamask = 0xffffffffUL;
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX27_USBOTG_BASE_ADDR + 0x400,
+		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_USB2,
-		.end = MXC_INT_USB2,
+		.start = MX27_INT_USB2,
+		.end = MX27_INT_USB2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -522,7 +381,7 @@ struct platform_device mxc_usbh2 = {
 	.name = "mxc-ehci",
 	.id = 2,
 	.dev = {
-		.coherent_dma_mask = 0xffffffff,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.dma_mask = &usbh2_dmamask,
 	},
 	.resource = mxc_usbh2_resources,
@@ -530,115 +389,115 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= SSI1_BASE_ADDR,
-		.end	= SSI1_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI1,
-		.end	= MXC_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI1_TX0,
-		.end	= DMA_REQ_SSI1_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI1_RX0,
-		.end	= DMA_REQ_SSI1_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI1_TX1,
-		.end	= DMA_REQ_SSI1_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI1_RX1,
-		.end	= DMA_REQ_SSI1_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= SSI2_BASE_ADDR,
-		.end	= SSI2_BASE_ADDR + 0x6F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_SSI2,
-		.end	= MXC_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.name	= "tx0",
-		.start	= DMA_REQ_SSI2_TX0,
-		.end	= DMA_REQ_SSI2_TX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx0",
-		.start	= DMA_REQ_SSI2_RX0,
-		.end	= DMA_REQ_SSI2_RX0,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "tx1",
-		.start	= DMA_REQ_SSI2_TX1,
-		.end	= DMA_REQ_SSI2_TX1,
-		.flags	= IORESOURCE_DMA,
-	}, {
-		.name	= "rx1",
-		.start	= DMA_REQ_SSI2_RX1,
-		.end	= DMA_REQ_SSI2_RX1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
+	{								\
+		.name = _name,						\
+		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
+		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
+		.flags = IORESOURCE_DMA,				\
+	}
 
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
+	static struct resource imx_ssi_resources ## n[] = {		\
+		{							\
+			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
+			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = MX2x_INT_SSI1,				\
+			.end = MX2x_INT_SSI1,				\
+			.flags = IORESOURCE_IRQ,			\
+		},							\
+		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
+		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
+		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
+		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
+	};								\
+									\
+	struct platform_device imx_ssi_device ## n = {			\
+		.name = "imx-ssi",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
+		.resource = imx_ssi_resources ## n,			\
+	}
 
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 /* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.irq = MXC_INT_GPIO,
-		.base = IO_ADDRESS(GPIO_BASE_ADDR),
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}, {
-		.chip.label = "gpio-4",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	}, {
-		.chip.label = "gpio-5",
-		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
 	}
-};
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
 
 int __init mxc_register_gpios(void)
 {
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+	else
+#endif
+		return 0;
 }
+
+#ifdef CONFIG_MACH_MX21
+static struct resource mx21_usbhc_resources[] = {
+	{
+		.start	= MX21_USBOTG_BASE_ADDR,
+		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start		= MX21_INT_USBHOST,
+		.end		= MX21_INT_USBHOST,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx21_usbhc_device = {
+	.name		= "imx21-hcd",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
+	.resource	= mx21_usbhc_resources,
+};
+#endif
+
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 97306aa..84ed513 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,8 +1,10 @@
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
+#endif
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_i2c_device1;
+#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -25,6 +34,9 @@ extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_spi_device2;
+#endif
+extern struct platform_device mx21_usbhc_device;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
deleted file mode 100644
index 7b18760..0000000
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-eukrea_cpuimx27.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static int eukrea_cpuimx27_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_fec_device,
-};
-
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
-		.irq = IRQ_GPIOB(23),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
-		.irq = IRQ_GPIOB(22),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
-		.irq = IRQ_GPIOB(27),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
-		.irq = IRQ_GPIOB(30),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-
-	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	mxc_register_device(&mxc_sdhc_device1, NULL);
-	/* in which case UART4 is also used for Bluetooth */
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	platform_device_register(&serial_device);
-#endif
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer eukrea_cpuimx27_timer = {
-	.init = eukrea_cpuimx27_timer_init,
-};
-
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = eukrea_cpuimx27_init,
-	.timer          = &eukrea_cpuimx27_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index 7382b6d..f3b169d 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
deleted file mode 100644
index ae8f759..0000000
--- a/arch/arm/mach-mx2/generic.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * generic.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
-	/*
-	 * this fixed mapping covers:
-	 * - AIPI1
-	 * - AIPI2
-	 * - AITC
-	 * - ROM Patch
-	 * - and some reserved space
-	 */
-	{
-		.virtual = AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-		.length = AIPI_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - CSI
-	 * - ATA
-	 */
-	{
-		.virtual = SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-		.length = SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - EMI
-	 */
-	{
-		.virtual = X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length = X_MEMC_SIZE,
-		.type = MT_DEVICE
-	}
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx21_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
-void __init mx27_init_irq(void)
-{
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
-}
-
-void __init mx21_init_irq(void)
-{
-	mx27_init_irq();
-}
-
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
new file mode 100644
index 0000000..1f616dca
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&imx27_nand_device,
+			&eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
new file mode 100644
index 0000000..b5710bf
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
new file mode 100644
index 0000000..113e58d
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -0,0 +1,294 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux-mx21.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+	/* CS8900A */
+	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+
+	/* UART3 (IrDA) - only TXD and RXD */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+
+	/* LCDC */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA24_PF_REV,     /* Sharp panel dedicated signal */
+	PA25_PF_CLS,     /* Sharp panel dedicated signal */
+	PA26_PF_PS,      /* Sharp panel dedicated signal */
+	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+
+	/* MMC/SDHC */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+
+	/* NFC */
+	PF0_PF_NRFB,
+	PF1_PF_NFCE,
+	PF2_PF_NFWP,
+	PF3_PF_NFCLE,
+	PF4_PF_NFALE,
+	PF5_PF_NFRE,
+	PF6_PF_NFWE,
+	PF7_PF_NFIO0,
+	PF8_PF_NFIO1,
+	PF9_PF_NFIO2,
+	PF10_PF_NFIO3,
+	PF11_PF_NFIO4,
+	PF12_PF_NFIO5,
+	PF13_PF_NFIO6,
+	PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+	.width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx21ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp |= MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+	return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(MX21ADS_IO_REG);
+	tmp &= ~MX21ADS_IO_LCDON;
+	__raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
+
+	.init = mx21ads_fb_init,
+	.exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+	void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	if (ret)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+	.get_ro = mx21ads_sdhc_get_ro,
+	.init = mx21ads_sdhc_init,
+	.exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+	/*
+	 * Memory-mapped I/O on MX21ADS Base board:
+	 *   - CS8900A Ethernet controller
+	 *   - ST16C2552CJ UART
+	 *   - CPU and Base board version
+	 *   - Base board I/O register
+	 */
+	{
+		.virtual = MX21ADS_MMIO_BASE_ADDR,
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
+		.length = MX21ADS_MMIO_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx21ads_map_io(void)
+{
+	mx21_map_io();
+	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+			"mx21ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+	mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+	.init	= mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX21_PHYS_OFFSET + 0x100,
+	.map_io         = mx21ads_map_io,
+	.init_irq       = mx21_init_irq,
+	.init_machine   = mx21ads_board_init,
+	.timer          = &mx21ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
new file mode 100644
index 0000000..b2f4e0d
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
new file mode 100644
index 0000000..6ce3236
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -0,0 +1,345 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mx27ads_pins[] = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA24_PF_REV,
+	PA25_PF_CLS,
+	PA26_PF_PS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+	.width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + 0x02000000 - 1,
+	.flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &mx27ads_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &mx27ads_flash_resource,
+};
+
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+	if (on)
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+	else
+		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+
+	.lcd_power	= lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+			      void *data)
+{
+	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+			   "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27ads_sdhc1_init,
+	.exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+	.init = mx27ads_sdhc2_init,
+	.exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mx27ads_nor_mtd_device,
+	&mxc_fec_device,
+	&mxc_w1_master_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mx27ads_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+			"mx27ads");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, mx27ads_i2c_devices,
+				ARRAY_SIZE(mx27ads_i2c_devices));
+	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+	unsigned long fref = 26000000;
+
+	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+		fref = 27000000;
+
+	mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+	.init	= mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+	{
+		.virtual = PBC_BASE_ADDRESS,
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+		.length = SZ_1M,
+		.type = MT_DEVICE,
+	},
+};
+
+static void __init mx27ads_map_io(void)
+{
+	mx27_map_io();
+	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27ads_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27ads_board_init,
+	.timer          = &mx27ads_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
new file mode 100644
index 0000000..bc38559
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-mxt_td60.c
@@ -0,0 +1,295 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= MX27_PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
new file mode 100644
index 0000000..a87422e
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -0,0 +1,396 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+	&mxc_wdt,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.init	= otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host) {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+	}
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
new file mode 100644
index 0000000..36c8943
--- /dev/null
+++ b/arch/arm/mach-mx2/mach-pcm038.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+static int pcm038_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* SSI4 */
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD,
+	PC18_PF_SSI4_TXD,
+	PC19_PF_SSI4_CLK,
+	/* USB host */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+/*
+ * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
+ * 16 bit width
+ */
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_sram_mtd_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+	.width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc1ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data pcm038_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&pcm038_nor_mtd_device,
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+	&pcm038_sram_mtd_device,
+	&mxc_wdt,
+};
+
+/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
+ * setup other stuffs to access the sram. */
+static void __init pcm038_init_sram(void)
+{
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+	}
+};
+
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static void __init pcm038_init(void)
+{
+	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+			"PCM038");
+
+	pcm038_init_sram();
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+
+	mxc_gpio_mode(PE16_AF_OWIRE);
+	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pcm038_i2c_devices,
+				ARRAY_SIZE(pcm038_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+	pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pcm038_timer = {
+	.init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = pcm038_init,
+	.timer          = &pcm038_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c
new file mode 100644
index 0000000..6413431
--- /dev/null
+++ b/arch/arm/mach-mx2/mm-imx21.c
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-mx2/mm-imx21.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+		.length = MX21_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+		.length = MX21_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+		.length = MX21_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx21_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+
+	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
+}
+
+void __init mx21_init_irq(void)
+{
+	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-mx2/mm-imx27.c
new file mode 100644
index 0000000..3366ed4
--- /dev/null
+++ b/arch/arm/mach-mx2/mm-imx27.c
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-mx2/mm-imx27.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX27 memory map definition */
+static struct map_desc imx27_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+		.length = MX27_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+		.length = MX27_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+		.length = MX27_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx27_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
+
+	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
+}
+
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
deleted file mode 100644
index cf5f77c..0000000
--- a/arch/arm/mach-mx2/mx21ads.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
-#include <mach/iomux.h>
-#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
-
-#include "devices.h"
-
-static unsigned int mx21ads_pins[] = {
-
-	/* CS8900A */
-	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-
-	/* UART3 (IrDA) - only TXD and RXD */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-
-	/* LCDC */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA24_PF_REV,     /* Sharp panel dedicated signal */
-	PA25_PF_CLS,     /* Sharp panel dedicated signal */
-	PA26_PF_PS,      /* Sharp panel dedicated signal */
-	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-
-	/* MMC/SDHC */
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-
-	/* NFC */
-	PF0_PF_NRFB,
-	PF1_PF_NFCE,
-	PF2_PF_NFWP,
-	PF3_PF_NFCLE,
-	PF4_PF_NFALE,
-	PF5_PF_NFRE,
-	PF6_PF_NFWE,
-	PF7_PF_NFIO0,
-	PF8_PF_NFIO1,
-	PF9_PF_NFIO2,
-	PF10_PF_NFIO3,
-	PF11_PF_NFIO4,
-	PF12_PF_NFIO5,
-	PF13_PF_NFIO6,
-	PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
-	.width = 4,
-};
-
-static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx21ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx21ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx21ads_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct imxuart_platform_data uart_norts_pdata = {
-};
-
-
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp |= MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-	return 0;
-}
-
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp &= ~MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-}
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 2,
-			.left_margin	= 6,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 8,
-			.lower_margin	= 10,
-		},
-		.pcr		= 0xfb108bc7,
-		.bpp		= 16,
-	},
-};
-
-static struct imx_fb_platform_data mx21ads_fb_data = {
-	.mode = mx21ads_modes,
-	.num_modes = ARRAY_SIZE(mx21ads_modes),
-
-	.pwmr		= 0x00a903ff,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020008,
-
-	.init = mx21ads_fb_init,
-	.exit = mx21ads_fb_exit,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
-	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
-	void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOD(25), detect_irq,
-		IRQF_TRIGGER_FALLING, "mmc-detect", data);
-	if (ret)
-		goto out;
-	return 0;
-out:
-	return ret;
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOD(25), data);
-}
-
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
-	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
-	.get_ro = mx21ads_sdhc_get_ro,
-	.init = mx21ads_sdhc_init,
-	.exit = mx21ads_sdhc_exit,
-};
-
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct map_desc mx21ads_io_desc[] __initdata = {
-	/*
-	 * Memory-mapped I/O on MX21ADS Base board:
-	 *   - CS8900A Ethernet controller
-	 *   - ST16C2552CJ UART
-	 *   - CPU and Base board version
-	 *   - Base board I/O register
-	 */
-	{
-		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
-		.length = MX21ADS_MMIO_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx21ads_map_io(void)
-{
-	mx21_map_io();
-	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
-			"mx21ads");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata);
-	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx21ads_timer_init(void)
-{
-	mx21_clocks_init(32768, 26000000);
-}
-
-static struct sys_timer mx21ads_timer = {
-	.init	= mx21ads_timer_init,
-};
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx21ads_map_io,
-	.init_irq       = mx21_init_irq,
-	.init_machine   = mx21ads_board_init,
-	.timer          = &mx21ads_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
deleted file mode 100644
index 83e412b..0000000
--- a/arch/arm/mach-mx2/mx27ads.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27ads.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static unsigned int mx27ads_pins[] = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
-	.width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
-	.start = 0xc0000000,
-	.end = 0xc0000000 + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx27ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx27ads_flash_resource,
-};
-
-static struct imxi2c_platform_data mx27ads_i2c_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-void lcd_power(int on)
-{
-	if (on)
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
-	else
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 1,
-			.left_margin	= 9,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFB008BC0,
-	},
-};
-
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.mode = mx27ads_modes,
-	.num_modes = ARRAY_SIZE(mx27ads_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-
-	.lcd_power	= lcd_power,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOE(21), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOB(7), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init = mx27ads_sdhc1_init,
-	.exit = mx27ads_sdhc1_exit,
-};
-
-static struct imxmmc_platform_data sdhc2_pdata = {
-	.init = mx27ads_sdhc2_init,
-	.exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx27ads_nor_mtd_device,
-	&mxc_fec_device,
-	&mxc_w1_master_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static void __init mx27ads_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
-			"mx27ads");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, mx27ads_i2c_devices,
-				ARRAY_SIZE(mx27ads_i2c_devices));
-	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
-	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27ads_timer_init(void)
-{
-	unsigned long fref = 26000000;
-
-	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
-		fref = 27000000;
-
-	mx27_clocks_init(fref);
-}
-
-static struct sys_timer mx27ads_timer = {
-	.init	= mx27ads_timer_init,
-};
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
-	{
-		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = SZ_1M,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx27ads_map_io(void)
-{
-	mx27_map_io();
-	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27ads_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27ads_board_init,
-	.timer          = &mx27ads_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
deleted file mode 100644
index 82ea227..0000000
--- a/arch/arm/mach-mx2/mx27lite.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27lite.h>
-
-#include "devices.h"
-
-static unsigned int mx27lite_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27lite_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
-		"imx27lite");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27lite_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27lite_timer = {
-	.init	= mx27lite_timer_init,
-};
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27lite_init,
-	.timer          = &mx27lite_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
deleted file mode 100644
index 6761d1b..0000000
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27pdk.h>
-
-#include "devices.h"
-
-static unsigned int mx27pdk_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27pdk_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
-		"mx27pdk");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27pdk_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27pdk_timer = {
-	.init	= mx27pdk_timer_init,
-};
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27pdk_init,
-	.timer          = &mx27pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
deleted file mode 100644
index 8bcc1a5..0000000
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static unsigned int mxt_td60_pins[] __initdata = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA25_PF_CLS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	PF8_AF_ATA_IORDY,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
-	.bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
-				unsigned gpio_base, unsigned ngpio,
-				void *context)
-{
-	static int mxt_td60_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
-		if (mxt_td60_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-						mxt_td60_gpio_value[n]);
-		gpio_export(gpio_base + n, 0);
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
-	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
-	.invert		= 0, /* Do not invert */
-	.setup		= mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9557", 0x18),
-		.platform_data = &mxt_td60_pca9557_pdata,
-	},
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
-	{
-		.mode = {
-			.name		= "Chimei LW700AT9003",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 480,
-			.pixclock	= 30303,
-			.hsync_len	= 64,
-			.left_margin	= 0x67,
-			.right_margin	= 0x68,
-			.vsync_len	= 16,
-			.upper_margin	= 0x0f,
-			.lower_margin	= 0x0f,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFA208B83,
-	},
-};
-
-static struct imx_fb_platform_data mxt_td60_fb_data = {
-	.mode = mxt_td60_modes,
-	.num_modes = ARRAY_SIZE(mxt_td60_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
-				"sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOF(8), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init = mxt_td60_sdhc1_init,
-	.exit = mxt_td60_sdhc1_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static void __init mxt_td60_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
-			"MXT_TD60");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
-
-	i2c_register_board_info(0, mxt_td60_i2c_devices,
-				ARRAY_SIZE(mxt_td60_i2c_devices));
-
-	i2c_register_board_info(1, mxt_td60_i2c2_devices,
-				ARRAY_SIZE(mxt_td60_i2c2_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
-	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mxt_td60_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mxt_td60_timer = {
-	.init	= mxt_td60_timer_init,
-};
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
-	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mx27_map_io,
-	.init_irq	= mx27_init_irq,
-	.init_machine	= mxt_td60_board_init,
-	.timer		= &mxt_td60_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
deleted file mode 100644
index aea3d34..0000000
--- a/arch/arm/mach-mx2/pca100.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux.h>
-#include <mach/i2c.h>
-#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/irqs.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static int pca100_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* onboard I2C */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* external I2C */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct mxc_nand_platform_data pca100_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_w1_master_device,
-	&mxc_fec_device,
-};
-
-static struct imxi2c_platform_data pca100_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
-	}
-};
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_eeprom at25320 = {
-	.name		= "at25320an",
-	.byte_len	= 4096,
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
-	{
-		.modalias = "at25",
-		.max_speed_hz = 30000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &at25320,
-	},
-};
-
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
-
-static struct spi_imx_master pca100_spi_0_data = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-#endif
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "imx-mmc-detect", data);
-	if (ret)
-		printk(KERN_ERR
-			"pca100: Failed to reuest irq for sd/mmc detection\n");
-
-	return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-	.init = pca100_sdhc2_init,
-	.exit = pca100_sdhc2_exit,
-};
-
-static void __init pca100_init(void)
-{
-	int ret;
-
-	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
-			ARRAY_SIZE(pca100_pins), "PCA100");
-	if (ret)
-		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-
-	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pca100_i2c_devices,
-				ARRAY_SIZE(pca100_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	spi_register_board_info(pca100_spi_board_info,
-				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
-#endif
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init pca100_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
-	.init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pca100_init,
-	.timer          = &pca100_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
deleted file mode 100644
index 906d59b..0000000
--- a/arch/arm/mach-mx2/pcm038.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
-
-#include "devices.h"
-
-static int pcm038_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SSI4 */
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD,
-	PC18_PF_SSI4_TXD,
-	PC19_PF_SSI4_CLK,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
-	.width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc1ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&pcm038_nor_mtd_device,
-	&mxc_w1_master_device,
-	&mxc_fec_device,
-	&pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
-}
-
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static struct spi_imx_master pcm038_spi_0_data = {
-	.chipselect = pcm038_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
-	{
-		.dev	= &mxc_sdhc_device1.dev,
-		.supply	= "sdhc_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc1_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
-	.consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev	= NULL,
-		.supply	= "imx_cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-struct mc13783_regulator_init_data pcm038_regulators[] = {
-	{
-		.id = MC13783_REGU_VCAM,
-		.init_data = &cam_data,
-	}, {
-		.id = MC13783_REGU_VMMC1,
-		.init_data = &sdhc1_data,
-	},
-};
-
-static struct mc13783_platform_data pcm038_pmic = {
-	.regulators = pcm038_regulators,
-	.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
-		 MC13783_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IRQ_GPIOB(23),
-		.max_speed_hz = 300000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &pcm038_pmic,
-		.mode = SPI_CS_HIGH,
-	}
-};
-
-static void __init pcm038_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
-			"PCM038");
-
-	pcm038_init_sram();
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-
-	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pcm038_i2c_devices,
-				ARRAY_SIZE(pcm038_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-
-	/* PE18 for user-LED D40 */
-	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
-	/* MC13783 IRQ */
-	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
-	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
-	spi_register_board_info(pcm038_spi_board_info,
-				ARRAY_SIZE(pcm038_spi_board_info));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
-	pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pcm038_timer = {
-	.init = pcm038_timer_init,
-};
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pcm038_init,
-	.timer          = &pcm038_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f45..f490a40 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),
@@ -201,9 +201,9 @@ static struct resource pcm970_sja1000_resources[] = {
 };
 
 struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.clock		= 16000000 / 2,
-	.ocr		= 0x40 | 0x18,
-	.cdr		= 0x40,
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
 };
 
 static struct platform_device pcm970_sja1000 = {
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485c..1c0c835 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
 
 static struct resource uart0[] = {
 	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART1_BASE_ADDR,
+		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
+		.start = MX2x_INT_UART1,
+		.end = MX2x_INT_UART1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = {
 
 static struct resource uart1[] = {
 	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART2_BASE_ADDR,
+		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
+		.start = MX2x_INT_UART2,
+		.end = MX2x_INT_UART2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = {
 
 static struct resource uart2[] = {
 	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART3_BASE_ADDR,
+		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
+		.start = MX2x_INT_UART3,
+		.end = MX2x_INT_UART3,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = {
 
 static struct resource uart3[] = {
 	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART4_BASE_ADDR,
+		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
+		.start = MX2x_INT_UART4,
+		.end = MX2x_INT_UART4,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = {
 #ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
+		.start = MX27_UART5_BASE_ADDR,
+		.end = MX27_UART5_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
+		.start = MX27_INT_UART5,
+		.end = MX27_INT_UART5,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = {
 
 static struct resource uart5[] = {
 	{
-		.start = UART6_BASE_ADDR,
-		.end = UART6_BASE_ADDR + 0x0B5,
+		.start = MX27_UART6_BASE_ADDR,
+		.end = MX27_UART6_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART6,
-		.end = MXC_INT_UART6,
+		.start = MX27_INT_UART6,
+		.end = MX27_INT_UART6,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index cc28f56..54d2173 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -3,7 +3,6 @@ if ARCH_MX25
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
-	select ARCH_MXC_IOMUX_V3
 	bool "Support MX25PDK (3DS) Platform"
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index fe23836..10cebc5 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b8..1550149 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,16 @@ static unsigned long get_rate_nfc(struct clk *clk)
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+	return get_rate_per(7);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +154,7 @@ static void clk_cgcr_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,27 +163,34 @@ static void clk_cgcr_disable(struct clk *clk)
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -206,14 +223,24 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
+	/* Clock source for lcdc is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
 
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 9fdeea1..3a405fa 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -438,3 +438,80 @@ struct platform_device mx25_fec_device = {
 	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
 	.resource	= mx25_fec_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MX25_NFC_BASE_ADDR,
+		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_NANDFC,
+		.end	= MX25_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name		= "mxc_nand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
+	.resource	= mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+	{
+		.start	= MX25_DRYICE_BASE_ADDR,
+		.end	= MX25_DRYICE_BASE_ADDR + 0x40,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_DRYICE,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_rtc_device = {
+	.name	= "imxdi_rtc",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_rtc_resources),
+	.resource	= mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+	{
+		.start	= MX25_LCDC_BASE_ADDR,
+		.end	= MX25_LCDC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_LCDC,
+		.end	= MX25_INT_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fb_device = {
+	.name		= "imx-fb",
+	.id		= 0,
+	.resource	= mx25_fb_resources,
+	.num_resources	= ARRAY_SIZE(mx25_fb_resources),
+	.dev		= {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};
+
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX25_WDOG_BASE_ADDR,
+		.end = MX25_WDOG_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe5420f..cee12c0 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -18,3 +18,7 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;
+extern struct platform_device mxc_wdt;
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
new file mode 100644
index 0000000..83d7410
--- /dev/null
+++ b/arch/arm/mach-mx25/mach-mx25pdk.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fec.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include "devices.h"
+#include <mach/iomux-mx25.h>
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
+}
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
deleted file mode 100644
index 921bc99..0000000
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/fec.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include "devices.h"
-#include <mach/iomux.h>
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct pad_desc mx25pdk_pads[] = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-};
-
-static struct fec_platform_data mx25_fec_pdata = {
-        .phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		35
-#define FEC_RESET_B_GPIO	104
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static void __init mx25pdk_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_usbh2, NULL);
-
-	mx25pdk_fec_reset();
-	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
-}
-
-static void __init mx25pdk_timer_init(void)
-{
-	mx25_clocks_init(26000000);
-}
-
-static struct sys_timer mx25pdk_timer = {
-	.init   = mx25pdk_timer_init,
-};
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX25_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx25_map_io,
-	.init_irq       = mx25_init_irq,
-	.init_machine   = mx25pdk_init,
-	.timer          = &mx25pdk_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 2829441..344753f 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -61,6 +62,15 @@ config MACH_MX31_3DS
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
@@ -72,6 +82,7 @@ config MACH_MX31MOBOARD
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
 	  specific configurations for the board and its peripherals.
@@ -86,6 +97,7 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -93,6 +105,7 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b29..5d650fd 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)		+= qong.o
-obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
+obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
deleted file mode 100644
index 54aab40..0000000
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
-#include <mach/mmc.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-#include "crm_regs.h"
-
-static int armadillo5x0_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* UART2 */
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	/* LAN9118_IRQ */
-	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
-	/* I2C2 */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
-	{
-		.code		= KEY_ENTER, /*28*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
-		.active_low	= 1,
-		.desc		= "menu",
-		.wakeup		= 1,
-	}, {
-		.code		= KEY_BACK, /*158*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
-		.active_low	= 1,
-		.desc		= "back",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
-	.buttons	= armadillo5x0_buttons,
-	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-static struct platform_device armadillo5x0_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &armadillo5x0_button_data,
-	}
-};
-
-/*
- * NAND Flash
- */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
-	.width		= 1,
-	.hw_ecc		= 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
-	{
-		.name		= "nor.bootloader",
-		.offset		= 0x00000000,
-		.size		= 4*32*1024,
-	}, {
-		.name		= "nor.kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16*128*1024,
-	}, {
-		.name		= "nor.userland",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 110*128*1024,
-	}, {
-		.name		= "nor.config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1*128*1024,
-	},
-};
-
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
-	.width		= 2,
-	.parts		= armadillo5x0_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static struct resource armadillo5x0_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= CS0_BASE_ADDR,
-	.end		= CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-static struct platform_device armadillo5x0_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &armadillo5x0_nor_flash_resource,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
-	{	/* 640x480 @ 60 Hz */
-		.name		= "CRT-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 35,
-		.right_margin	= 115,
-		.upper_margin	= 43,
-		.lower_margin	= 1,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {/* 800x600 @ 56 Hz */
-		.name		= "CRT-SVGA",
-		.refresh	= 56,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 30000,
-		.left_margin	= 30,
-		.right_margin	= 108,
-		.upper_margin	= 13,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.name		= "CRT-VGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
-				   irq_handler_t detect_irq, void *data)
-{
-	int ret;
-	int gpio_det, gpio_wp;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
-	ret = gpio_request(gpio_det, "sdhc-card-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(gpio_det);
-
-	ret = gpio_request(gpio_wp, "sdhc-write-protect");
-	if (ret)
-		goto err_gpio_free;
-
-	gpio_direction_input(gpio_wp);
-
-	/* When supported the trigger type have to be BOTH */
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "sdhc-detect", data);
-
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(gpio_wp);
-
-err_gpio_free:
-	gpio_free(gpio_det);
-
-	return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-	.get_ro = armadillo5x0_sdhc1_get_ro,
-	.init = armadillo5x0_sdhc1_init,
-	.exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
-	{
-		.start	= CS3_BASE_ADDR,
-		.end	= CS3_BASE_ADDR + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
-	.resource       = armadillo5x0_smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/* UART device data */
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&armadillo5x0_smc911x_device,
-	&mxc_i2c_device1,
-	&armadillo5x0_button_device,
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
-	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
-			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* Register UART */
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
-
-	/* Register FB */
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-
-	/* Register NOR Flash */
-	mxc_register_device(&armadillo5x0_nor_flash,
-			    &armadillo5x0_nor_flash_pdata);
-
-	/* Register NAND Flash */
-	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
-
-	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
-
-	/* RTC */
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
-		else
-			gpio_free(ARMADILLO5X0_RTC_GPIO);
-	}
-	if (armadillo5x0_i2c_rtc.irq == 0)
-		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer armadillo5x0_timer = {
-	.init	= armadillo5x0_timer_init,
-};
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
-	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x00000100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.timer		= &armadillo5x0_timer,
-	.init_machine	= armadillo5x0_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
new file mode 100644
index 0000000..9a9eb6d
--- /dev/null
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -0,0 +1,630 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+	u32 min_pre, temp_pre, old_err, err;
+
+	if (div >= 512) {
+		*pre = 8;
+		*post = 64;
+	} else if (div >= 64) {
+		min_pre = (div - 1) / 64 + 1;
+		old_err = 8;
+		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+			err = div % temp_pre;
+			if (err == 0) {
+				*pre = temp_pre;
+				break;
+			}
+			err = temp_pre - err;
+			if (err < old_err) {
+				old_err = err;
+				*pre = temp_pre;
+			}
+		}
+		*post = (div + *pre - 1) / *pre;
+	} else if (div <= 8) {
+		*pre = div;
+		*post = 1;
+	} else {
+		*pre = 1;
+		*post = div;
+	}
+}
+
+static struct clk mcu_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+
+static int cgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	if (!clk->enable_reg)
+		return 0;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 3 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void cgr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	if (!clk->enable_reg)
+		return;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(3 << clk->enable_shift);
+
+	/* special case for EMI clock */
+	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+		reg |= (1 << clk->enable_shift);
+
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long pll_ref_get_rate(void)
+{
+	unsigned long ccmr;
+	unsigned int prcs;
+
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+	if (prcs == 0x1)
+		return CKIL_CLK_FREQ * 1024;
+	else
+		return clk_get_rate(&ckih_clk);
+}
+
+static unsigned long usb_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(MXC_CCM_UPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(MXC_CCM_SRPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long mcu_pll_get_rate(struct clk *clk)
+{
+	unsigned long reg, ccmr;
+
+	ccmr = __raw_readl(MXC_CCM_CCMR);
+
+	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+		return clk_get_rate(&ckih_clk);
+
+	reg = __raw_readl(MXC_CCM_MPCTL);
+
+	return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static int usb_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void usb_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_UPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int serial_pll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg |= MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+
+	/* No lock bit on MX31, so using max time from spec */
+	udelay(80);
+
+	return 0;
+}
+
+static void serial_pll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_SPE;
+	__raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long mcu_main_get_rate(struct clk *clk)
+{
+	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+		return clk_get_rate(&serial_pll_clk);
+	else
+		return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long ahb_get_rate(struct clk *clk)
+{
+	unsigned long max_pdf;
+
+	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long ipg_get_rate(struct clk *clk)
+{
+	unsigned long ipg_pdf;
+
+	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long nfc_get_rate(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+
+	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long hsp_get_rate(struct clk *clk)
+{
+	unsigned long hsp_pdf;
+
+	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long usb_get_rate(struct clk *clk)
+{
+	unsigned long usb_pdf, usb_prepdf;
+
+	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+		       MXC_CCM_PDR1_USB_PODF_OFFSET);
+	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
+	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long csi_get_rate(struct clk *clk)
+{
+	u32 reg, pre, post;
+
+	reg = __raw_readl(MXC_CCM_PDR0);
+	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	pre++;
+	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	post++;
+	return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post, parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+}
+
+static int csi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set CSI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR0) &
+	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR0);
+
+	return 0;
+}
+
+static unsigned long ssi1_get_rate(struct clk *clk)
+{
+	unsigned long ssi1_pdf, ssi1_prepdf;
+
+	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long ssi2_get_rate(struct clk *clk)
+{
+	unsigned long ssi2_pdf, ssi2_prepdf;
+
+	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long firi_get_rate(struct clk *clk)
+{
+	unsigned long firi_pdf, firi_prepdf;
+
+	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 pre, post;
+	u32 parent = clk_get_rate(clk->parent);
+	u32 div = parent / rate;
+
+	if (parent % rate)
+		div++;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	return parent / (pre * post);
+
+}
+
+static int firi_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+	div = parent / rate;
+
+	if ((parent / div) != rate)
+		return -EINVAL;
+
+	__calc_pre_post_dividers(div, &pre, &post);
+
+	/* Set FIRI clock divider */
+	reg = __raw_readl(MXC_CCM_PDR1) &
+	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_PDR1);
+
+	return 0;
+}
+
+static unsigned long mbx_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long mstick1_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+			MXC_CCM_PDR2_MST1_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long mstick2_get_rate(struct clk *clk)
+{
+	unsigned long msti_pdf;
+
+	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+			MXC_CCM_PDR2_MST2_PDF_OFFSET);
+	return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = mcu_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+	.parent = &mcu_pll_clk,
+	.get_rate = mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = serial_pll_get_rate,
+	.enable = serial_pll_enable,
+	.disable = serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = usb_pll_get_rate,
+	.enable = usb_pll_enable,
+	.disable = usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+	.parent = &mcu_main_clk,
+	.get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= cgr_enable,		\
+		.disable	= cgr_disable,		\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= getsetround##_get_rate,	\
+		.set_rate	= getsetround##_set_rate,	\
+		.round_rate	= getsetround##_round_rate,	\
+		.enable		= cgr_enable,			\
+		.disable	= cgr_disable,			\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
+
+DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
+
+DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
+DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
+	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK(NULL, "firi", firi_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "rng", rng_clk)
+	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+	u32 reg;
+
+	ckih_rate = fref;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* change the csi_clk parent if necessary */
+	reg = __raw_readl(MXC_CCM_CCMR);
+	if (!(reg & MXC_CCM_CCMR_CSCS))
+		if (clk_set_parent(&csi_clk, &usb_pll_clk))
+			pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
+	/* Turn off all possible clocks */
+	__raw_writel((3 << 4), MXC_CCM_CGR0);
+	__raw_writel(0, MXC_CCM_CGR1);
+	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
+		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+					   MX32, but still required to be set */
+		     MXC_CCM_CGR2);
+
+	/*
+	 * Before turning off usb_pll make sure ipg_per_clk is generated
+	 * by ipg_clk and not usb_pll.
+	 */
+	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
+	usb_pll_disable(&usb_pll_clk);
+
+	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+	clk_enable(&gpt_clk);
+	clk_enable(&emi_clk);
+	clk_enable(&iim_clk);
+
+	clk_enable(&serial_pll_clk);
+
+	mx31_read_cpu_rev();
+
+	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+		reg = __raw_readl(MXC_CCM_PMCR1);
+		/* No PLL restart on DVFS switch; enable auto EMI handshake */
+		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+		__raw_writel(reg, MXC_CCM_PMCR1);
+	}
+
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7584b4c..9f3e943e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -485,15 +485,13 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	int i;
 	unsigned int ll = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	ll = (3 << 16);
 #endif
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	/* Turn off all clocks except the ones we need to survive, namely:
 	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
@@ -504,7 +502,8 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
deleted file mode 100644
index 27a318a..0000000
--- a/arch/arm/mach-mx3/clock.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crm_regs.h"
-
-#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		min_pre = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = (div + *pre - 1) / *pre;
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-
-	/* special case for EMI clock */
-	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
-		reg |= (1 << clk->enable_shift);
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
-	unsigned long ccmr;
-	unsigned int prcs;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		return CKIL_CLK_FREQ * 1024;
-	else
-		return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_UPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_SRPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg, ccmr;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-
-	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
-		return clk_get_rate(&ckih_clk);
-
-	reg = __raw_readl(MXC_CCM_MPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
-	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
-	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
-		return clk_get_rate(&serial_pll_clk);
-	else
-		return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
-	unsigned long max_pdf;
-
-	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
-		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
-	unsigned long ipg_pdf;
-
-	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
-		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-
-	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
-		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
-	unsigned long hsp_pdf;
-
-	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
-		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
-	unsigned long usb_pdf, usb_prepdf;
-
-	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
-		       MXC_CCM_PDR1_USB_PODF_OFFSET);
-	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
-			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
-	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
-	u32 reg, pre, post;
-
-	reg = __raw_readl(MXC_CCM_PDR0);
-	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	pre++;
-	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	post++;
-	return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post, parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set CSI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR0) &
-	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
-	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR0);
-
-	return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
-	unsigned long ssi1_pdf, ssi1_prepdf;
-
-	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
-			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
-	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
-	unsigned long ssi2_pdf, ssi2_prepdf;
-
-	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
-			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
-	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
-	unsigned long firi_pdf, firi_prepdf;
-
-	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
-			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
-	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post;
-	u32 parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set FIRI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR1) &
-	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
-	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
-	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR1);
-
-	return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
-			MXC_CCM_PDR2_MST1_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
-			MXC_CCM_PDR2_MST2_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
-	.parent = &mcu_pll_clk,
-	.get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = serial_pll_get_rate,
-	.enable = serial_pll_enable,
-	.disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = usb_pll_get_rate,
-	.enable = usb_pll_enable,
-	.disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
-	.parent = &mcu_main_clk,
-	.get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= cgr_enable,		\
-		.disable	= cgr_disable,		\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= getsetround##_get_rate,	\
-		.set_rate	= getsetround##_set_rate,	\
-		.round_rate	= getsetround##_round_rate,	\
-		.enable		= cgr_enable,			\
-		.disable	= cgr_disable,			\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK(NULL, "firi", firi_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
-	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
-	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
-	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
-	u32 reg;
-	int i;
-
-	ckih_rate = fref;
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
-
-	/* change the csi_clk parent if necessary */
-	reg = __raw_readl(MXC_CCM_CCMR);
-	if (!(reg & MXC_CCM_CCMR_CSCS))
-		if (clk_set_parent(&csi_clk, &usb_pll_clk))
-			pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
-	/* Turn off all possible clocks */
-	__raw_writel((3 << 4), MXC_CCM_CGR0);
-	__raw_writel(0, MXC_CCM_CGR1);
-	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
-		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
-					   MX32, but still required to be set */
-		     MXC_CCM_CGR2);
-
-	/*
-	 * Before turning off usb_pll make sure ipg_per_clk is generated
-	 * by ipg_clk and not usb_pll.
-	 */
-	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
-	usb_pll_disable(&usb_pll_clk);
-
-	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
-	clk_enable(&gpt_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-
-	clk_enable(&serial_pll_clk);
-
-	mx31_read_cpu_rev();
-
-	if (mx31_revision() >= CHIP_REV_2_0) {
-		reg = __raw_readl(MXC_CCM_PMCR1);
-		/* No PLL restart on DVFS switch; enable auto EMI handshake */
-		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
-		__raw_writel(reg, MXC_CCM_PMCR1);
-	}
-
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db82880..861afe0 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa362..37a8a07 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 6adb586..db7acd6 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -575,11 +575,64 @@ struct platform_device imx_ssi_device1 = {
 	.resource = imx_ssi_resources1,
 };
 
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device imx_wdt_device0 = {
+	.name           = "imx2-wdt",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+	.resource       = imx_wdt_resources,
+};
+
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = MX31_RTC_BASE_ADDR,
+		.end    = MX31_RTC_BASE_ADDR + 0x3fff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = MX31_INT_RTC,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device0 = {
+	.name           = "mxc_rtc",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+	.resource       = imx_rtc_resources,
+};
+
+static struct resource imx_kpp_resources[] = {
+	{
+		.start	= MX3x_KPP_BASE_ADDR,
+		.end	= MX3x_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX3x_INT_KPP,
+		.end	= MX3x_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
+static int __init mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
@@ -597,6 +650,8 @@ static int mx3_devices_init(void)
 		imx_ssi_resources0[1].end = MX35_INT_SSI1;
 		imx_ssi_resources1[1].start = MX35_INT_SSI2;
 		imx_ssi_resources1[1].end = MX35_INT_SSI2;
+		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 42cf175..2c3c864 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -25,4 +25,7 @@ extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;
+extern struct platform_device imx_rtc_device0;
+extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/iomux-imx31.c b/arch/arm/mach-mx3/iomux-imx31.c
new file mode 100644
index 0000000..a1d7fa5
--- /dev/null
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
+#define IOMUXGPR	(IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+	u32 field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+	field = pin_mode & 0x3;
+	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 field, l;
+	void __iomem *reg;
+
+	pin &= IOMUX_PADNUM_MASK;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+	unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+	u32 l;
+
+	spin_lock(&gpio_mux_lock);
+	l = __raw_readl(IOMUXGPR);
+	if (en)
+		l |= gp;
+	else
+		l &= ~gp;
+
+	__raw_writel(l, IOMUXGPR);
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
deleted file mode 100644
index c66ccbc..0000000
--- a/arch/arm/mach-mx3/iomux.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mx3.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
-#define IOMUXGPR	(IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
-	field = pin_mode & 0x3;
-	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 field, l;
-	void __iomem *reg;
-
-	pin &= IOMUX_PADNUM_MASK;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(const unsigned int pin)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
-{
-	unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
-	u32 l;
-
-	spin_lock(&gpio_mux_lock);
-	l = __raw_readl(IOMUXGPR);
-	if (en)
-		l |= gp;
-	else
-		l &= ~gp;
-
-	__raw_writel(l, IOMUXGPR);
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
deleted file mode 100644
index 6fa99ce..0000000
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * KZM-ARM11-01 support
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-kzmarm11.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/memory.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(KZM_ARM11_16550),
-		.mapbase	= KZM_ARM11_16550,
-		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.irqflags	= IRQ_TYPE_EDGE_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 0,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_BUGGY_UART,
-	},
-	{},
-};
-
-static struct resource serial8250_resources[] = {
-	{
-		.start	= KZM_ARM11_16550,
-		.end	= KZM_ARM11_16550 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-				.platform_data = serial_platform_data,
-			  },
-	.num_resources	= ARRAY_SIZE(serial8250_resources),
-	.resource	= serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
-	u8 tmp;
-
-	/*
-	 * GPIO 1-1: external UART interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/*
-	 * Unmask UART interrupt
-	 */
-	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
-	tmp |= 0x2;
-	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
-
-	return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
-	return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
-	{
-		.start	= CS5_BASE_ADDR,
-		.end	= CS5_BASE_ADDR + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device kzm_smsc9118_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
-	.resource	= kzm_smsc9118_resources,
-	.dev		= {
-				.platform_data = &kzm_smsc9118_config,
-			  },
-};
-
-static int __init kzm_init_smsc9118(void)
-{
-	/*
-	 * GPIO 1-2: SMSC9118 interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
-	return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_DCD_DCE1__DCD_DCE1,
-	MX31_PIN_RI_DCE1__RI_DCE1,
-	MX31_PIN_DSR_DCE1__DSR_DCE1,
-	MX31_PIN_DTR_DCE1__DTR_DCE1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_DCD_DTE1__DCD_DTE2,
-	MX31_PIN_RI_DTE1__RI_DTE2,
-	MX31_PIN_DSR_DTE1__DSR_DTE2,
-	MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
-	mxc_iomux_setup_multiple_pins(kzm_pins,
-				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
-	kzm_init_imx_uart();
-
-	pr_info("Clock input source is 26MHz\n");
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
-	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
-		.length		= CS5_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer kzm_timer = {
-	.init   = kzm_timer_init,
-};
-
-/*
- * The following uses standard kernel macros define in arch.h in order to
- * initialize __mach_desc_KZM_ARM11_01 data structure.
- */
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = kzm_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = kzm_board_init,
-	.timer          = &kzm_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
new file mode 100644
index 0000000..5f72ec9
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -0,0 +1,582 @@
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+#include "crm_regs.h"
+
+static int armadillo5x0_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* UART2 */
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	/* LAN9118_IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
+};
+
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	/* Chip already enabled by hardware */
+	/* OTG phy reset*/
+	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+	if (err) {
+		pr_err("Failed to request the usb otg reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb otg phy\n");
+		goto otg_free_reset;
+	}
+
+	gpio_set_value(OTG_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+	return 0;
+
+otg_free_reset:
+	gpio_free(OTG_RESET);
+	return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+	/* Enable the chip */
+	err = gpio_request(USBH2_CS, "USB-H2-CS");
+	if (err) {
+		pr_err("Failed to request the usb host 2 CS gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+	if (err) {
+		pr_err("Failed to drive the usb host 2 CS gpio\n");
+		goto h2_free_cs;
+	}
+
+	/* H2 phy reset*/
+	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+	if (err) {
+		pr_err("Failed to request the usb host 2 reset gpio\n");
+		goto h2_free_cs;
+	}
+
+	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb host 2 phy\n");
+		goto h2_free_reset;
+	}
+
+	gpio_set_value(USBH2_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+	return 0;
+
+h2_free_reset:
+	gpio_free(USBH2_RESET);
+h2_free_cs:
+	gpio_free(USBH2_CS);
+	return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+	{	/* 640x480 @ 60 Hz */
+		.name		= "CRT-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 35,
+		.right_margin	= 115,
+		.upper_margin	= 43,
+		.lower_margin	= 1,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {/* 800x600 @ 56 Hz */
+		.name		= "CRT-SVGA",
+		.refresh	= 56,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 30000,
+		.left_margin	= 30,
+		.right_margin	= 108,
+		.upper_margin	= 13,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CRT-VGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+				   irq_handler_t detect_irq, void *data)
+{
+	int ret;
+	int gpio_det, gpio_wp;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+	ret = gpio_request(gpio_det, "sdhc-card-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(gpio_det);
+
+	ret = gpio_request(gpio_wp, "sdhc-write-protect");
+	if (ret)
+		goto err_gpio_free;
+
+	gpio_direction_input(gpio_wp);
+
+	/* When supported the trigger type have to be BOTH */
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "sdhc-detect", data);
+
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(gpio_wp);
+
+err_gpio_free:
+	gpio_free(gpio_det);
+
+	return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.get_ro = armadillo5x0_sdhc1_get_ro,
+	.init = armadillo5x0_sdhc1_init,
+	.exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+	{
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+	.resource       = armadillo5x0_smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* Register UART */
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+	/* Register FB */
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+	/* USB */
+#if defined(CONFIG_USB_ULPI)
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+	.init	= armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+	/* Maintainer: Alberto Panizzo  */
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mx31_init_irq,
+	.timer		= &armadillo5x0_timer,
+	.init_machine	= armadillo5x0_init,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
new file mode 100644
index 0000000..f085d5d
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -0,0 +1,273 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#define KZM_ARM11_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
+	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+	MX31_IO_ADDRESS(x))
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init   = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = kzm_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = kzm_board_init,
+	.timer          = &kzm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
new file mode 100644
index 0000000..58e5729
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -0,0 +1,431 @@
+/*
+ *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+#include <linux/fsl_devices.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31_3ds.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include "devices.h"
+
+/*!
+ * @file mx31_3ds.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+static int mx31_3ds_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+	/* MC13783 IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+	/* USB OTG reset */
+	IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/*Keyboard*/
+	MX31_PIN_KEY_ROW0_KEY_ROW0,
+	MX31_PIN_KEY_ROW1_KEY_ROW1,
+	MX31_PIN_KEY_ROW2_KEY_ROW2,
+	MX31_PIN_KEY_COL0_KEY_COL0,
+	MX31_PIN_KEY_COL1_KEY_COL1,
+	MX31_PIN_KEY_COL2_KEY_COL2,
+	MX31_PIN_KEY_COL3_KEY_COL3,
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx31_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx31_3ds_keymap_data = {
+	.keymap		= mx31_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+	.constraints = {
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+	{
+		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+		.init_data = &pwgtx_init,
+	}, {
+		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+		.init_data = &pwgtx_init,
+	},
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.regulators = mx31_3ds_regulators,
+	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+	.flags  = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+	{
+		.modalias	= "mc13783",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 1, /* SS2 */
+		.platform_data	= &mc13783_pdata,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+	.flash_bbt	= 1,
+#endif
+};
+
+/*
+ * USB OTG
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+
+static void mx31_3ds_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(USBOTG_RST_B, "otgusb-reset");
+	gpio_direction_output(USBOTG_RST_B, 0);
+	mdelay(1);
+	gpio_set_value(USBOTG_RST_B, 1);
+}
+
+static struct fsl_usb2_platform_data usbotg_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= LAN9217_BASE_ADDR,
+		.end		= LAN9217_BASE_ADDR + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= EXPIO_INT_ENET,
+		.end		= EXPIO_INT_ENET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+{
+	uint32_t imr_val;
+	uint32_t int_valid;
+	uint32_t expio_irq;
+
+	imr_val = __raw_readw(CPLD_INT_MASK_REG);
+	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* mask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg |= 1 << expio;
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	/* mask the interrupt */
+	expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+	uint16_t reg;
+	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+	/* unmask the interrupt */
+	reg = __raw_readw(CPLD_INT_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static int __init mx31_3ds_init_expio(void)
+{
+	int i;
+	int ret;
+
+	/* Check if there's a debug board connected */
+	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		/* No Debug board found */
+		return -ENODEV;
+	}
+
+	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
+		__raw_readw(CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/* Disable the interrupts and clear the status */
+	__raw_writew(0, CPLD_INT_MASK_REG);
+	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+	__raw_writew(0, CPLD_INT_RESET_REG);
+	__raw_writew(0x1F, CPLD_INT_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
+
+	return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
+	{
+		.virtual = MX31_CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length = MX31_CS5_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31_3ds_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+				      "mx31_3ds");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(mx31_3ds_spi_devs,
+						ARRAY_SIZE(mx31_3ds_spi_devs));
+
+	mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+
+	mx31_3ds_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+
+	if (!mx31_3ds_init_expio())
+		platform_device_register(&smsc911x_device);
+}
+
+static void __init mx31_3ds_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31_3ds_timer = {
+	.init	= mx31_3ds_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31_3DS data structure.
+ */
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31_3ds_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31_3ds_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
new file mode 100644
index 0000000..b3d1a18
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -0,0 +1,559 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include "devices.h"
+
+/*!
+ * @file mx31ads.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*!
+ * The serial port definition structure.
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.irq      = EXPIO_INT_XUART_INTA,
+		.uartclk  = 14745600,
+		.regshift = 0,
+		.iotype   = UPIO_MEM,
+		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+	}, {
+		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.irq      = EXPIO_INT_XUART_INTB,
+		.uartclk  = 14745600,
+		.regshift = 0,
+		.iotype   = UPIO_MEM,
+		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+	},
+	{},
+};
+
+static struct platform_device serial_device = {
+	.name	= "serial8250",
+	.id	= 0,
+	.dev	= {
+		.platform_data = serial_platform_data,
+	},
+};
+
+static int __init mxc_init_extuart(void)
+{
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int mxc_init_extuart(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static unsigned int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+	expio_irq = MXC_EXP_IO_BASE;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		if ((int_valid & 1) == 0)
+			continue;
+
+		generic_handle_irq(expio_irq);
+	}
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* mask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+	__raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* clear the interrupt status */
+	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+	/* unmask the interrupt */
+	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+	int i;
+
+	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+	     i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+	{
+		.supply = "cpu_vcc",
+	}
+};
+
+static struct regulator_init_data sw1a_data = {
+	.constraints = {
+		.name = "SW1A",
+		.min_uV = 1275000,
+		.max_uV = 1600000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_MODE,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+				    REGULATOR_MODE_FAST,
+		.state_mem = {
+			 .uV = 1400000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+	.consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+	.constraints = {
+		.name = "VIOHO",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.state_mem = {
+			 .uV = 2800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+	.constraints = {
+		.name = "VIOLO",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.initial_state = PM_SUSPEND_MEM,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+	.constraints = {
+		.name = "SW2A",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		 },
+		.state_disk = {
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 0,
+		 },
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+static struct regulator_init_data ldo1_data = {
+	.constraints = {
+		.name = "VCAM/VMMC1/VMMC2",
+		.min_uV = 2800000,
+		.max_uV = 2800000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.apply_uV = 1,
+	},
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+	.constraints = {
+		.name = "VESIM/VSIM/AVDD",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+	.consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+	.constraints = {
+		.name = "VDIG",
+		.min_uV = 1500000,
+		.max_uV = 1500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+	.constraints = {
+		.name = "VRF1/CVDD_2.775",
+		.min_uV = 2500000,
+		.max_uV = 2500000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.apply_uV = 1,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+	.name            = "wm8350:white",
+	.default_trigger = "heartbeat",
+	.max_uA          = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+	.vmid_discharge_msecs = 1000,
+	.drain_msecs = 30,
+	.cap_discharge_msecs = 700,
+	.vmid_charge_msecs = 700,
+	.vmid_s_curve = WM8350_S_CURVE_SLOW,
+	.dis_out4 = WM8350_DISCHARGE_SLOW,
+	.dis_out3 = WM8350_DISCHARGE_SLOW,
+	.dis_out2 = WM8350_DISCHARGE_SLOW,
+	.dis_out1 = WM8350_DISCHARGE_SLOW,
+	.vroi_out4 = WM8350_TIE_OFF_500R,
+	.vroi_out3 = WM8350_TIE_OFF_500R,
+	.vroi_out2 = WM8350_TIE_OFF_500R,
+	.vroi_out1 = WM8350_TIE_OFF_500R,
+	.vroi_enable = 0,
+	.codec_current_on = WM8350_CODEC_ISEL_1_0,
+	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
+	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_ON);
+
+	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+			   WM8350_GPIO_DEBOUNCE_OFF);
+
+	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+	/* LEDs */
+	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+			       WM8350_ISINK_FLASH_DISABLE,
+			       WM8350_ISINK_FLASH_TRIG_BIT,
+			       WM8350_ISINK_FLASH_DUR_32MS,
+			       WM8350_ISINK_FLASH_ON_INSTANT,
+			       WM8350_ISINK_FLASH_OFF_INSTANT,
+			       WM8350_ISINK_FLASH_MODE_EN);
+	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+			       WM8350_ISINK_MODE_BOOST,
+			       WM8350_ISINK_ILIM_NORMAL,
+			       WM8350_DC5_RMP_20V,
+			       WM8350_DC5_FBSRC_ISINKA);
+	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+			    &wm8350_led_data);
+
+	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+	regulator_has_full_constraints();
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+	{
+		I2C_BOARD_INFO("wm8350", 0x1a),
+		.platform_data = &mx31_wm8350_pdata,
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+	},
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+	i2c_register_board_info(1, mx31ads_i2c1_devices,
+				ARRAY_SIZE(mx31ads_i2c1_devices));
+
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+	mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
+static unsigned int ssi_pins[] = {
+	MX31_PIN_SFS5__SFS5,
+	MX31_PIN_SCK5__SCK5,
+	MX31_PIN_SRXD5__SRXD5,
+	MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+	mxc_register_device(&imx_ssi_device0, NULL);
+	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
+/*!
+ * This structure defines static mappings for the i.MX31ADS board.
+ */
+static struct map_desc mx31ads_io_desc[] __initdata = {
+	{
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
+		.type		= MT_DEVICE
+	},
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+static void __init mx31ads_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
+}
+
+static void __init mx31ads_init_irq(void)
+{
+	mx31_init_irq();
+	mx31ads_init_expio();
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_extuart();
+	mxc_init_imx_uart();
+	mxc_init_i2c();
+	mxc_init_audio();
+}
+
+static void __init mx31ads_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31ads_timer = {
+	.init	= mx31ads_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31ADS data structure.
+ */
+MACHINE_START(MX31ADS, "Freescale MX31ADS")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31ads_map_io,
+	.init_irq       = mx31ads_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31ads_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
new file mode 100644
index 0000000..b2c7f51
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -0,0 +1,362 @@
+/*
+ *  LILLY-1131 module support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+	{
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT |
+			  SMSC911X_SAVE_MAC_ADDRESS |
+			  SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc91x_resources),
+	.resource	= smsc91x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	}
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+/* USB */
+
+#if defined(CONFIG_USB_ULPI)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	unsigned int pins[] = {
+		MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+		MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+		MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+		MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+		MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+		MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+		MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+		MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+		MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+		MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+		MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+		MX31_PIN_USBOTG_STP__USBOTG_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
+	mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
+				"USBOTG_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
+
+	return 0;
+}
+
+static int usbh1_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+		MX31_PIN_CSPI1_MISO__USBH1_RXDP,
+		MX31_PIN_CSPI1_SS0__USBH1_TXDM,
+		MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+		MX31_PIN_CSPI1_SS2__USBH1_RCV,
+		MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+		MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	return 0;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= usbh1_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static void lilly1131_usb_init(void)
+{
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+	switch (mx31lilly_baseboard) {
+	case MX31LILLY_NOBOARD:
+		break;
+	case MX31LILLY_DB:
+		mx31lilly_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+			mx31lilly_baseboard);
+	}
+
+	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* USB */
+	lilly1131_usb_init();
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+	.init	= mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
+	.map_io		= mx31_map_io,
+	.init_irq	= mx31_init_irq,
+	.init_machine	= mx31lilly_board_init,
+	.timer		= &mx31lilly_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
new file mode 100644
index 0000000..2b6d114
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -0,0 +1,297 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains the module-specific initialization routines.
+ */
+
+static unsigned int mx31lite_pins[] = {
+	/* LAN9117 IRQ pin */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#if defined(CONFIG_USB_ULPI)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+	{
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
+static void __init mxc_board_init(void)
+{
+	int ret;
+
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
+	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+				      "mx31lite");
+
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
+	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+
+	/* SMSC9117 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+		platform_device_register(&smsc911x_device);
+	}
+}
+
+static void __init mx31lite_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31lite_timer = {
+	.init	= mx31lite_timer_init,
+};
+
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31lite_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
new file mode 100644
index 0000000..62b5e40
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -0,0 +1,565 @@
+/*
+ *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+static unsigned int moboard_pins[] = {
+	/* UART0 */
+	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
+	/* UART4 */
+	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+	/* I2C0 */
+	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+	/* I2C1 */
+	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
+};
+
+static struct physmap_flash_data mx31moboard_flash_data = {
+	.width  	= 2,
+};
+
+static struct resource mx31moboard_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx31moboard_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx31moboard_flash_data,
+	},
+	.resource = &mx31moboard_flash_resource,
+	.num_resources = 1,
+};
+
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+	.bitrate = 400000,
+};
+
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+	.bitrate = 100000,
+};
+
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_led_platform_data moboard_led[] = {
+	{
+		.id = MC13783_LED_R1,
+		.name = "coreboard-led-4:red",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_G1,
+		.name = "coreboard-led-4:green",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_B1,
+		.name = "coreboard-led-4:blue",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_R2,
+		.name = "coreboard-led-5:red",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_G2,
+		.name = "coreboard-led-5:green",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_B2,
+		.name = "coreboard-led-5:blue",
+		.max_current = 3,
+	},
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+	.num_leds = ARRAY_SIZE(moboard_led),
+	.led = moboard_led,
+	.flags = MC13783_LED_SLEWLIMTC,
+	.abmode = MC13783_LED_AB_DISABLED,
+	.tc1_period = MC13783_LED_PERIOD_10MS,
+	.tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.leds = &moboard_leds,
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+		MC13783_USE_ADC | MC13783_USE_LED,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+	return !gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_CD, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_CD);
+
+	ret = gpio_request(SDHC1_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_WP);
+
+	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"sdhc1-card-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+	gpio_free(SDHC1_WP);
+err_gpio_free:
+	gpio_free(SDHC1_CD);
+
+	return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(SDHC1_CD), data);
+	gpio_free(SDHC1_WP);
+	gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.get_ro	= moboard_sdhc1_get_ro,
+	.init	= moboard_sdhc1_init,
+	.exit	= moboard_sdhc1_exit,
+};
+
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		      PAD_CTL_ODE_CMOS)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static void usb_xcvr_reset(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+	gpio_request(USBH2_EN_B, "usbh2-en");
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+	mdelay(1);
+}
+
+#if defined(CONFIG_USB_ULPI)
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
+
+
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name 	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
+	&mx31moboard_leds_device,
+};
+
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+		"moboard");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+
+	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
+	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	usb_xcvr_reset();
+
+	moboard_usbh2_init();
+
+	switch (mx31moboard_baseboard) {
+	case MX31NOBOARD:
+		break;
+	case MX31DEVBOARD:
+		mx31moboard_devboard_init();
+		break;
+	case MX31MARXBOT:
+		mx31moboard_marxbot_init();
+		break;
+	case MX31SMARTBOT:
+	case MX31EYEBOT:
+		mx31moboard_smartbot_init(mx31moboard_baseboard);
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+			mx31moboard_baseboard);
+	}
+}
+
+static void __init mx31moboard_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31moboard_timer = {
+	.init	= mx31moboard_timer_init,
+};
+
+MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
+	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31moboard_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
new file mode 100644
index 0000000..bcac84d
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
new file mode 100644
index 0000000..cce4106
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -0,0 +1,694 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/gfp.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+static unsigned int pcm037_pins[] = {
+	/* I2C */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
+	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+	/* SPI1 */
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+	/* UART2 */
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	/* UART3 */
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+	/* LAN9217 irq pin */
+	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+	/* Onewire */
+	MX31_PIN_BATT_LINE__OWIRE,
+	/* Framebuffer */
+	MX31_PIN_LD0__LD0,
+	MX31_PIN_LD1__LD1,
+	MX31_PIN_LD2__LD2,
+	MX31_PIN_LD3__LD3,
+	MX31_PIN_LD4__LD4,
+	MX31_PIN_LD5__LD5,
+	MX31_PIN_LD6__LD6,
+	MX31_PIN_LD7__LD7,
+	MX31_PIN_LD8__LD8,
+	MX31_PIN_LD9__LD9,
+	MX31_PIN_LD10__LD10,
+	MX31_PIN_LD11__LD11,
+	MX31_PIN_LD12__LD12,
+	MX31_PIN_LD13__LD13,
+	MX31_PIN_LD14__LD14,
+	MX31_PIN_LD15__LD15,
+	MX31_PIN_LD16__LD16,
+	MX31_PIN_LD17__LD17,
+	MX31_PIN_VSYNC3__VSYNC3,
+	MX31_PIN_HSYNC__HSYNC,
+	MX31_PIN_FPSHIFT__FPSHIFT,
+	MX31_PIN_DRDY0__DRDY0,
+	MX31_PIN_D3_REV__D3_REV,
+	MX31_PIN_CONTRAST__CONTRAST,
+	MX31_PIN_D3_SPL__D3_SPL,
+	MX31_PIN_D3_CLS__D3_CLS,
+	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
+};
+
+static struct physmap_flash_data pcm037_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm037_flash_data,
+	},
+	.resource = &pcm037_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource smsc911x_resources[] = {
+	{
+		.start		= MX31_CS1_BASE_ADDR + 0x300,
+		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
+			  SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device pcm037_eth = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = MX31_CS4_BASE_ADDR,
+	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_sram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_camera[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}
+};
+
+static struct platform_device pcm037_mt9t031 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
+	},
+};
+
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+	if (ret)
+		return ret;
+
+	gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+	if (ret)
+		goto err_gpio_free;
+	gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+				"sdhc-detect", data);
+	if (ret)
+		goto err_gpio_free_2;
+
+	return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+	gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+	gpio_free(SDHC1_GPIO_DET);
+
+	return ret;
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+	gpio_free(SDHC1_GPIO_DET);
+	gpio_free(SDHC1_GPIO_WP);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+	.get_ro = pcm970_sdhc1_get_ro,
+#endif
+	.init = pcm970_sdhc1_init,
+	.exit = pcm970_sdhc1_exit,
+};
+
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
+static struct platform_device *devices[] __initdata = {
+	&pcm037_flash,
+	&pcm037_sram_device,
+	&imx_wdt_device0,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz Sharp */
+		.name		= "Sharp-LQ035Q7DH06-QVGA",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7DH06-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = MX31_CS5_BASE_ADDR,
+		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	int ret;
+	u32 tmp;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
+
+	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+			"pcm037");
+
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
+	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
+	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
+	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
+	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
+
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+	mxc_register_device(&mxc_w1_master_device, NULL);
+
+	/* LAN9217 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (ret)
+		pr_warning("could not get LAN irq gpio\n");
+	else {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	}
+
+
+	/* I2C adapters and devices */
+	i2c_register_board_info(1, pcm037_i2c_devices,
+			ARRAY_SIZE(pcm037_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink_mt9t031.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+}
+
+static void __init pcm037_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+struct sys_timer pcm037_timer = {
+	.init	= pcm037_timer_init,
+};
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+	/* Maintainer: Pengutronix */
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm037_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d38600..8d38600 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
new file mode 100644
index 0000000..78d9185
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -0,0 +1,414 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		/* 240x320 @ 60 Hz */
+		.name		= "Sharp-LQ035Q7",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "TX090",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 38255,
+		.left_margin	= 144,
+		.right_margin	= 0,
+		.upper_margin	= 7,
+		.lower_margin	= 40,
+		.hsync_len	= 96,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "Sharp-LQ035Q7",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+	.width  = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &pcm043_flash_data,
+	},
+	.resource = &pcm043_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+	.bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+       {
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+	&pcm043_flash,
+	&mxc_fec_device,
+	&imx_wdt_device0,
+};
+
+static struct pad_desc pcm043_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* Display */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
+	/* USB host */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SSI */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS	(1 * 32 + 31)
+#define AC97_GPIO_TXD	(1 * 32 + 28)
+#define AC97_GPIO_RESET	(1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret) {
+		printk("failed to get GPIO_TXFS: %d\n", ret);
+		return;
+	}
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+	/* warm reset */
+	gpio_direction_output(AC97_GPIO_TXFS, 1);
+	udelay(2);
+	gpio_set_value(AC97_GPIO_TXFS, 0);
+
+	gpio_free(AC97_GPIO_TXFS);
+	mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	int ret;
+
+	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+	if (ret)
+		goto err1;
+
+	ret = gpio_request(AC97_GPIO_TXD, "SSI");
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(AC97_GPIO_RESET, "SSI");
+	if (ret)
+		goto err3;
+
+	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(&txd_gpio);
+	mxc_iomux_v3_setup_pad(&reset_gpio);
+
+	gpio_direction_output(AC97_GPIO_TXFS, 0);
+	gpio_direction_output(AC97_GPIO_TXD, 0);
+
+	/* cold reset */
+	gpio_direction_output(AC97_GPIO_RESET, 0);
+	udelay(10);
+	gpio_direction_output(AC97_GPIO_RESET, 1);
+
+	mxc_iomux_v3_setup_pad(&txd);
+	mxc_iomux_v3_setup_pad(&txfs);
+
+	gpio_free(AC97_GPIO_RESET);
+err3:
+	gpio_free(AC97_GPIO_TXD);
+err2:
+	gpio_free(AC97_GPIO_TXFS);
+err1:
+	if (ret)
+		printk("%s failed with %d\n", __func__, ret);
+	mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+	.ac97_reset = pcm043_ac97_cold_reset,
+	.ac97_warm_reset = pcm043_ac97_warm_reset,
+	.flags = IMX_SSI_USE_AC97,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+			MXC_AUDMUX_V2_PTCR_TFSDIR,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+			MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+	i2c_register_board_info(0, pcm043_i2c_devices,
+			ARRAY_SIZE(pcm043_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+}
+
+static void __init pcm043_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+	.init	= pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+	/* Maintainer: Pengutronix */
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &pcm043_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
new file mode 100644
index 0000000..e5b5b83
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -0,0 +1,283 @@
+/*
+ *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev)	\
+	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 		0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION		0x00
+
+#define QONG_DNET_ID		1
+#define QONG_DNET_BASEADDR	\
+	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 		0x00001000
+
+#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+			"uart-0");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+	{
+		.name	= "dnet-memory",
+		.start	= QONG_DNET_BASEADDR,
+		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= QONG_FPGA_IRQ,
+		.end	= QONG_FPGA_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dnet_device = {
+	.name			= "dnet",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(dnet_resources),
+	.resource		= dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dnet_device);
+	return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+	.width = 2,
+};
+
+static struct resource qong_flash_resource = {
+	.start = MX31_CS0_BASE_ADDR,
+	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &qong_flash_data,
+		},
+	.resource = &qong_flash_resource,
+	.num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+	(void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+	else
+		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip >= 0)
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+	else
+		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+	.chip = {
+		.chip_delay		= 20,
+		.options		= 0,
+	},
+	.ctrl = {
+		.cmd_ctrl 		= qong_nand_cmd_ctrl,
+		.dev_ready		= qong_nand_device_ready,
+		.select_chip		= qong_nand_select_chip,
+	}
+};
+
+static struct resource qong_nand_resource = {
+	.start  	= MX31_CS3_BASE_ADDR,
+	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &qong_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+	/* init CS */
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+	/* enable pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+	/* ready/busy pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+	/* write protect pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+	platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+	void __iomem *regs;
+	u32 fpga_ver;
+
+	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+				__func__);
+		return;
+	}
+
+	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+	iounmap(regs);
+	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+			(fpga_ver & 0xF000) >> 12,
+			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+				"devices won't be registered!\n");
+		return;
+	}
+
+	/* register FPGA-based devices */
+	qong_init_nand_mtd();
+	qong_init_dnet();
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_imx_uart();
+	qong_init_nor_mtd();
+	qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+	.init	= qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+	/* Maintainer: DENX Software Engineering GmbH */
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx31_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &qong_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
deleted file mode 100644
index 3e7bafa..0000000
--- a/arch/arm/mach-mx3/mx31ads.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "devices.h"
-
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
- */
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*!
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
-		.irq      = EXPIO_INT_XUART_INTA,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	}, {
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
-		.irq      = EXPIO_INT_XUART_INTB,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	},
-	{},
-};
-
-static struct platform_device serial_device = {
-	.name	= "serial8250",
-	.id	= 0,
-	.dev	= {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static int __init mxc_init_extuart(void)
-{
-	return platform_device_register(&serial_device);
-}
-#else
-static inline int mxc_init_extuart(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* !SERIAL_IMX */
-
-static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 imr_val;
-	u32 int_valid;
-	u32 expio_irq;
-
-	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
-	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
- */
-static void expio_mask_irq(u32 irq)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(irq);
-	/* mask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
-	__raw_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
- */
-static void expio_ack_irq(u32 irq)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(irq);
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
- */
-static void expio_unmask_irq(u32 irq)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(irq);
-	/* unmask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.ack = expio_ack_irq,
-	.mask = expio_mask_irq,
-	.unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
-	int i;
-
-	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
-	/* disable the interrupt and clear the status */
-	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
-	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		set_irq_chip(i, &expio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_init_data sw1a_data = {
-	.constraints = {
-		.name = "SW1A",
-		.min_uV = 1275000,
-		.max_uV = 1600000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_MODE,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-				    REGULATOR_MODE_FAST,
-		.state_mem = {
-			 .uV = 1400000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
-	.consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
-	.constraints = {
-		.name = "VIOHO",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.state_mem = {
-			 .uV = 2800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
-	.constraints = {
-		.name = "VIOLO",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
-	.constraints = {
-		.name = "SW2A",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.state_disk = {
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 0,
-		 },
-		.always_on = 1,
-		.boot_on = 1,
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-static struct regulator_init_data ldo1_data = {
-	.constraints = {
-		.name = "VCAM/VMMC1/VMMC2",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-	},
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
-	{
-		.supply = "AVDD",
-	},
-	{
-		.supply = "HPVDD",
-	},
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
-	.constraints = {
-		.name = "VESIM/VSIM/AVDD",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
-	.consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1500000,
-		.max_uV = 1500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
-	.constraints = {
-		.name = "VRF1/CVDD_2.775",
-		.min_uV = 2500000,
-		.max_uV = 2500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
-	.name            = "wm8350:white",
-	.default_trigger = "heartbeat",
-	.max_uA          = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
-	.vmid_discharge_msecs = 1000,
-	.drain_msecs = 30,
-	.cap_discharge_msecs = 700,
-	.vmid_charge_msecs = 700,
-	.vmid_s_curve = WM8350_S_CURVE_SLOW,
-	.dis_out4 = WM8350_DISCHARGE_SLOW,
-	.dis_out3 = WM8350_DISCHARGE_SLOW,
-	.dis_out2 = WM8350_DISCHARGE_SLOW,
-	.dis_out1 = WM8350_DISCHARGE_SLOW,
-	.vroi_out4 = WM8350_TIE_OFF_500R,
-	.vroi_out3 = WM8350_TIE_OFF_500R,
-	.vroi_out2 = WM8350_TIE_OFF_500R,
-	.vroi_out1 = WM8350_TIE_OFF_500R,
-	.vroi_enable = 0,
-	.codec_current_on = WM8350_CODEC_ISEL_1_0,
-	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
-	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
-	int i;
-
-	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	/* Fix up for our own supplies. */
-	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-		ldo2_consumers[i].dev = wm8350->dev;
-
-	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
-	/* LEDs */
-	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
-			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
-	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
-			       WM8350_ISINK_FLASH_DISABLE,
-			       WM8350_ISINK_FLASH_TRIG_BIT,
-			       WM8350_ISINK_FLASH_DUR_32MS,
-			       WM8350_ISINK_FLASH_ON_INSTANT,
-			       WM8350_ISINK_FLASH_OFF_INSTANT,
-			       WM8350_ISINK_FLASH_MODE_EN);
-	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
-			       WM8350_ISINK_MODE_BOOST,
-			       WM8350_ISINK_ILIM_NORMAL,
-			       WM8350_DC5_RMP_20V,
-			       WM8350_DC5_FBSRC_ISINKA);
-	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
-			    &wm8350_led_data);
-
-	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
-	.init = mx31_wm8350_init,
-};
-#endif
-
-#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-	{
-		I2C_BOARD_INFO("wm8350", 0x1a),
-		.platform_data = &mx31_wm8350_pdata,
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-	},
-#endif
-};
-
-static void mxc_init_i2c(void)
-{
-	i2c_register_board_info(1, mx31ads_i2c1_devices,
-				ARRAY_SIZE(mx31ads_i2c1_devices));
-
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
-	mxc_register_device(&mxc_i2c_device1, NULL);
-}
-#else
-static void mxc_init_i2c(void)
-{
-}
-#endif
-
-/*!
- * This structure defines static mappings for the i.MX31ADS board.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
-	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE / 2,
-		.type		= MT_DEVICE
-	},
-};
-
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31ads_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_init_extuart();
-	mxc_init_imx_uart();
-	mxc_init_i2c();
-}
-
-static void __init mx31ads_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31ads_timer = {
-	.init	= mx31ads_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31ADS data structure.
- */
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31ads_map_io,
-	.init_irq       = mx31ads_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31ads_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
deleted file mode 100644
index 9ce029f..0000000
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *  LILLY-1131 module support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
-
-#include "devices.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
-	{
-		.start	= CS4_BASE_ADDR,
-		.end	= CS4_BASE_ADDR + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT |
-			  SMSC911X_SAVE_MAC_ADDRESS |
-			  SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc91x_resources),
-	.resource	= smsc91x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	}
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static struct spi_imx_master spi0_pdata = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct spi_imx_master spi1_pdata = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
-	.modalias	= "mc13783",
-	.max_speed_hz	= 1000000,
-	.bus_num	= 1,
-	.chip_select	= 0,
-	.platform_data	= &mc13783_pdata,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static void __init mx31lilly_board_init(void)
-{
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
-
-	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
-	/* SPI */
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
-	spi_register_board_info(&mc13783_dev, 1);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init mx31lilly_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31lilly_timer = {
-	.init	= mx31lilly_timer_init,
-};
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
-	.map_io		= mx31_map_io,
-	.init_irq	= mx31_init_irq,
-	.init_machine	= mx31lilly_board_init,
-	.timer		= &mx31lilly_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d..5f05bfb 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -28,7 +28,6 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
@@ -67,6 +66,13 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
+	/* SDHC1 */
+	MX31_PIN_SD1_DATA0__SD1_DATA0,
+	MX31_PIN_SD1_DATA1__SD1_DATA1,
+	MX31_PIN_SD1_DATA2__SD1_DATA2,
+	MX31_PIN_SD1_DATA3__SD1_DATA3,
+	MX31_PIN_SD1_CLK__SD1_CLK,
+	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
 /* UART */
@@ -79,11 +85,11 @@ static struct imxuart_platform_data uart_pdata __initdata = {
 static int gpio_det, gpio_wp;
 
 #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+		     PAD_CTL_ODE_CMOS)
 
 static int mxc_mmc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
 }
 
 static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +100,17 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
 
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
 	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
 
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
@@ -113,7 +124,7 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
@@ -133,7 +144,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 {
 	gpio_free(gpio_det);
 	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
 static struct imxmmc_platform_data mmc_pdata = {
@@ -194,5 +205,7 @@ void __init mx31lite_db_init(void)
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
 	platform_device_register(&litekit_led_device);
+	mxc_register_device(&imx_wdt_device0, NULL);
+	mxc_register_device(&imx_rtc_device0, NULL);
 }
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
deleted file mode 100644
index 789b20d..0000000
--- a/arch/arm/mach-mx3/mx31lite.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
-#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
-	/* LAN9117 IRQ pin */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-	/* SPI 1 */
-	MX31_PIN_CSPI2_SCLK__SCLK,
-	MX31_PIN_CSPI2_MOSI__MOSI,
-	MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0,
-	MX31_PIN_CSPI2_SS1__SS1,
-	MX31_PIN_CSPI2_SS2__SS2,
-};
-
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= CS4_BASE_ADDR,
-		.end		= CS4_BASE_ADDR + 0x100,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-};
-
-static struct spi_imx_master spi1_pdata = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13783_platform_data mc13783_pdata __initdata = {
-	.flags  = MC13783_USE_RTC |
-		  MC13783_USE_REGULATOR,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
-	.modalias       = "mc13783",
-	.max_speed_hz   = 1000000,
-	.bus_num	= 1,
-	.chip_select    = 0,
-	.platform_data  = &mc13783_pdata,
-	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-/*
- * USB
- */
-
-#if defined(CONFIG_USB_ULPI)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-		MX31_PIN_USBH2_CLK__USBH2_CLK,
-		MX31_PIN_USBH2_DIR__USBH2_DIR,
-		MX31_PIN_USBH2_NXT__USBH2_NXT,
-		MX31_PIN_USBH2_STP__USBH2_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
-				"USBH2_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
-	.init   = usbh2_init,
-	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
-};
-#endif
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start  = 0xa0000000,
-	.end    = 0xa1ffffff,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name   = "physmap-flash",
-	.id     = 0,
-	.dev    = {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
-	{
-		.virtual = CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = CS4_SIZE,
-		.type = MT_DEVICE
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31lite_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static void __init mxc_board_init(void)
-{
-	int ret;
-
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
-	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
-				      "mx31lite");
-
-	/* NOR and NAND flash */
-	platform_device_register(&physmap_flash_device);
-	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
-
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
-	spi_register_board_info(&mc13783_spi_dev, 1);
-
-#if defined(CONFIG_USB_ULPI)
-	/* USB */
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
-
-	/* SMSC9117 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-		platform_device_register(&smsc911x_device);
-	}
-}
-
-static void __init mx31lite_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31lite_timer = {
-	.init	= mx31lite_timer_init,
-};
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31lite_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31lite_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 438428e..582299c 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -20,7 +20,9 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -49,6 +51,9 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +113,33 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -182,6 +214,12 @@ static int __init devboard_usbh1_init(void)
 	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -196,5 +234,9 @@ void __init mx31moboard_devboard_init(void)
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
+	devboard_init_sel_gpios();
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 1f44b9c..4930f8c 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -22,8 +22,10 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -66,6 +68,9 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
 	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
 	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +132,12 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 static void dspics_resets_init(void)
 {
 	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_direction_output(TRSLAT_RST_B, 0);
 		gpio_export(TRSLAT_RST_B, false);
 	}
 
 	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_direction_output(DSPICS_RST_B, 0);
 		gpio_export(DSPICS_RST_B, false);
 	}
 }
@@ -200,7 +205,7 @@ static int __init marxbot_cam_init(void)
 	int ret = gpio_request(CAM_CHOICE, "cam-choice");
 	if (ret)
 		return ret;
-	gpio_direction_output(CAM_CHOICE, 1);
+	gpio_direction_output(CAM_CHOICE, 0);
 
 	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
 	if (ret)
@@ -223,6 +228,34 @@ static int __init marxbot_cam_init(void)
 	return 0;
 }
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -297,6 +330,11 @@ static int __init marxbot_usbh1_init(void)
 	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -307,6 +345,8 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	marxbot_init_sel_gpios();
+
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
@@ -322,5 +362,7 @@ void __init mx31moboard_marxbot_init(void)
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
 	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
 
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	marxbot_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 0000000..293eea6
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/fsl_devices.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+	/* CSI */
+	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+	/* ENABLES */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+	gpio_set_value(CAM_POWER, !on);
+	return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+	gpio_set_value(CAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(CAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= smartbot_cam_power,
+	.reset		= smartbot_cam_reset,
+	.board_info	= &smartbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+	&smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_RST_B, "cam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_RST_B, 1);
+	ret = gpio_request(CAM_POWER, "cam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_POWER, 0);
+
+	return 0;
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#if defined(CONFIG_USB_ULPI)
+
+static struct mxc_usbh_platform_data otg_host_pdata = {
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init smartbot_otg_host_init(void)
+{
+	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+}
+#else
+static inline int smartbot_otg_host_init(void) { return 0; }
+#endif
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+	if (!gpio_request(POWER_EN, "power-enable")) {
+		gpio_direction_output(POWER_EN, 0);
+		gpio_export(POWER_EN, false);
+	}
+
+	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+		gpio_direction_output(DSPIC_RST_B, 0);
+		gpio_export(DSPIC_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 0);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
+		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
+		gpio_export(TRSLAT_SRC_CHOICE, false);
+	}
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(int board)
+{
+	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+		"smartbot");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+
+	switch (board) {
+	case MX31SMARTBOT:
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+		break;
+	case MX31EYEBOT:
+		smartbot_otg_host_init();
+		break;
+	default:
+		printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
+			board);
+	}
+
+	smartbot_resets_init();
+
+	smartbot_cam_init();
+	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
deleted file mode 100644
index cfd605d..0000000
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
-#include <mach/mx3_camera.h>
-#include <mach/spi.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-static unsigned int moboard_pins[] = {
-	/* UART0 */
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS1__GPIO2_7,
-	/* UART4 */
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
-	/* I2C0 */
-	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
-	/* I2C1 */
-	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
-	/* USB reset */
-	MX31_PIN_GPIO1_0__GPIO1_0,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
-	/* USB H2 */
-	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
-	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
-	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
-	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
-	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
-	MX31_PIN_SCK6__GPIO1_25,
-	/* LEDs */
-	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
-	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-	/* SPI1 */
-	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
-	/* Atlas IRQ */
-	MX31_PIN_GPIO1_3__GPIO1_3,
-	/* SPI2 */
-	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
-	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
-	.width  	= 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx31moboard_flash_data,
-	},
-	.resource = &mx31moboard_flash_resource,
-	.num_resources = 1,
-};
-
-static int moboard_uart0_init(struct platform_device *pdev)
-{
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	return 0;
-}
-
-static struct imxuart_platform_data uart0_pdata = {
-	.init = moboard_uart0_init,
-};
-
-static struct imxuart_platform_data uart4_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
-	.bitrate = 400000,
-};
-
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
-	.bitrate = 100000,
-};
-
-static int moboard_spi1_cs[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(2),
-};
-
-static struct spi_imx_master moboard_spi1_master = {
-	.chipselect	= moboard_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
-	{
-		.dev	= &mxcsdhc_device0.dev,
-		.supply	= "sdhc0_vcc",
-	},
-	{
-		.dev	= &mxcsdhc_device1.dev,
-		.supply	= "sdhc1_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
-	.consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev	= &mx3_camera.dev,
-		.supply	= "cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13783_regulator_init_data moboard_regulators[] = {
-	{
-		.id = MC13783_REGU_VMMC1,
-		.init_data = &sdhc_vreg_data,
-	},
-	{
-		.id = MC13783_REGU_VCAM,
-		.init_data = &cam_vreg_data,
-	},
-};
-
-static struct mc13783_platform_data moboard_pmic = {
-	.regulators = moboard_regulators,
-	.num_regulators = ARRAY_SIZE(moboard_regulators),
-	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-		MC13783_USE_ADC,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-		.max_speed_hz = 300000,
-		.bus_num = 1,
-		.chip_select = 0,
-		.platform_data = &moboard_pmic,
-		.mode = SPI_CS_HIGH,
-	},
-};
-
-static int moboard_spi2_cs[] = {
-	MXC_SPI_CS(1),
-};
-
-static struct spi_imx_master moboard_spi2_master = {
-	.chipselect	= moboard_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_CD);
-
-	ret = gpio_request(SDHC1_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc1-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC1_WP);
-err_gpio_free:
-	gpio_free(SDHC1_CD);
-
-	return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC1_CD), data);
-	gpio_free(SDHC1_WP);
-	gpio_free(SDHC1_CD);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.get_ro	= moboard_sdhc1_get_ro,
-	.init	= moboard_sdhc1_init,
-	.exit	= moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-
-static void usb_xcvr_reset(void)
-{
-	gpio_request(USB_RESET_B, "usb-reset");
-	gpio_direction_output(USB_RESET_B, 0);
-	mdelay(1);
-	gpio_set_value(USB_RESET_B, 1);
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void moboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int moboard_usbh2_hw_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
-	if (ret)
-		return ret;
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	gpio_direction_output(USBH2_EN_B, 0);
-
-	return 0;
-}
-
-static int moboard_usbh2_hw_exit(struct platform_device *pdev)
-{
-	gpio_free(USBH2_EN_B);
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
-	.init	= moboard_usbh2_hw_init,
-	.exit	= moboard_usbh2_hw_exit,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
-};
-
-static int __init moboard_usbh2_init(void)
-{
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-}
-#else
-static inline int moboard_usbh2_init(void) { return 0; }
-#endif
-
-
-static struct gpio_led mx31moboard_leds[] = {
-	{
-		.name 	= "coreboard-led-0:red:running",
-		.default_trigger = "heartbeat",
-		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
-	}, {
-		.name	= "coreboard-led-1:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
-	}, {
-		.name	= "coreboard-led-2:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
-	}, {
-		.name	= "coreboard-led-3:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
-	},
-};
-
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
-	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
-	.leds		= mx31moboard_leds,
-};
-
-static struct platform_device mx31moboard_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mx31moboard_led_pdata,
-	},
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
-	&mx31moboard_leds_device,
-};
-
-static struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 4800,
-};
-
-#define CAMERA_BUF_SIZE	(4*1024*1024)
-
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
-{
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
-
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	memset(buf, 0, buf_size);
-
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
-		"moboard");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-
-	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
-
-	mx31moboard_init_sel_gpios();
-
-	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
-	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
-
-	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
-	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
-
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(moboard_spi_board_info,
-		ARRAY_SIZE(moboard_spi_board_info));
-
-	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
-
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
-		mxc_register_device(&mx3_camera, &camera_pdata);
-
-	usb_xcvr_reset();
-
-	moboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-	moboard_usbh2_init();
-
-	switch (mx31moboard_baseboard) {
-	case MX31NOBOARD:
-		break;
-	case MX31DEVBOARD:
-		mx31moboard_devboard_init();
-		break;
-	case MX31MARXBOT:
-		mx31moboard_marxbot_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
-			mx31moboard_baseboard);
-	}
-}
-
-static void __init mx31moboard_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31moboard_timer = {
-	.init	= mx31moboard_timer_init,
-};
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
-	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31moboard_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
deleted file mode 100644
index 18715f1..0000000
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/board-mx31pdk.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include "devices.h"
-
-/*!
- * @file mx31pdk.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
- */
-
-static int mx31pdk_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Support for the SMSC9217 on the Debug board.
- */
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= LAN9217_BASE_ADDR,
-		.end		= LAN9217_BASE_ADDR + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= EXPIO_INT_ENET,
-		.end		= EXPIO_INT_ENET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * Routines for the CPLD on the debug board. It contains a CPLD handling
- * LEDs, switches, interrupts for Ethernet.
- */
-
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
-{
-	uint32_t imr_val;
-	uint32_t int_valid;
-	uint32_t expio_irq;
-
-	imr_val = __raw_readw(CPLD_INT_MASK_REG);
-	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
- */
-static void expio_mask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* mask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg |= 1 << expio;
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
- */
-static void expio_ack_irq(uint32_t irq)
-{
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	/* mask the interrupt */
-	expio_mask_irq(irq);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
- */
-static void expio_unmask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* unmask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg &= ~(1 << expio);
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.ack = expio_ack_irq,
-	.mask = expio_mask_irq,
-	.unmask = expio_unmask_irq,
-};
-
-static int __init mx31pdk_init_expio(void)
-{
-	int i;
-	int ret;
-
-	/* Check if there's a debug board connected */
-	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
-		/* No Debug board found */
-		return -ENODEV;
-	}
-
-	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
-		__raw_readw(CPLD_CODE_VER_REG));
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/* Disable the interrupts and clear the status */
-	__raw_writew(0, CPLD_INT_MASK_REG);
-	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	__raw_writew(0x1F, CPLD_INT_MASK_REG);
-	for (i = MXC_EXP_IO_BASE;
-	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		set_irq_chip(i, &expio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
-
-	return 0;
-}
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
-	{
-		.virtual = CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
-		.length = CS5_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
-}
-
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
-				      "mx31pdk");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	if (!mx31pdk_init_expio())
-		platform_device_register(&smsc911x_device);
-}
-
-static void __init mx31pdk_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31pdk_timer = {
-	.init	= mx31pdk_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
- */
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31pdk_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx31pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
deleted file mode 100644
index 0bbc65e..0000000
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static struct pad_desc mx35pdk_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-};
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-}
-
-static void __init mx35pdk_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer mx35pdk_timer = {
-	.init	= mx35pdk_timer_init,
-};
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
-	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx35pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
deleted file mode 100644
index 5be3969..0000000
--- a/arch/arm/mach-mx3/pcm037.c
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/fsl_devices.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mmc.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-#include "pcm037.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
-	if (!strcmp("eet", str))
-		pcm037_instance = PCM037_EET;
-	else if (strcmp("pcm970", str))
-		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
-
-	return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
-	return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
-	/* I2C */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-	MX31_PIN_CSPI2_SS2__I2C3_SDA,
-	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
-	/* SPI1 */
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART2 */
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	/* UART3 */
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
-	/* LAN9217 irq pin */
-	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-	/* Onewire */
-	MX31_PIN_BATT_LINE__OWIRE,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	MX31_PIN_D3_REV__D3_REV,
-	MX31_PIN_CONTRAST__CONTRAST,
-	MX31_PIN_D3_SPL__D3_SPL,
-	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
-	/* CSI */
-	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	/* GPIO */
-	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-};
-
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
-	int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
-					ARRAY_SIZE(usbotg_pins), "usbotg");
-
-	if (ret < 0) {
-		printk(KERN_ERR "Cannot set up OTG pins\n");
-		return ret;
-	}
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
-	return 0;
-}
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-static struct platform_device pcm037_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm037_flash_data,
-	},
-	.resource = &pcm037_flash_resource,
-	.num_resources = 1,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= CS1_BASE_ADDR + 0x300,
-		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
-			  SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = CS4_BASE_ADDR,
-	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
-	.bitrate = 20000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static int pcm037_camera_power(struct device *dev, int on)
-{
-	/* disable or enable the camera in X7 or X8 PCM970 connector */
-	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
-	return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	}, {
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.board_info	= &pcm037_i2c_camera[1],
-	.i2c_adapter_id	= 2,
-	.module_name	= "mt9v022",
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_camera[0],
-	.i2c_adapter_id	= 2,
-	.module_name	= "mt9t031",
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
-};
-
-static struct platform_device pcm037_mt9t031 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_mt9t031,
-	},
-};
-
-static struct platform_device pcm037_mt9v022 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &iclink_mt9v022,
-	},
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
-	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
-	gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
-	gpio_free(SDHC1_GPIO_DET);
-
-	return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
-	gpio_free(SDHC1_GPIO_DET);
-	gpio_free(SDHC1_GPIO_WP);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-#ifdef PCM970_SDHC_RW_SWITCH
-	.get_ro = pcm970_sdhc1_get_ro,
-#endif
-	.init = pcm970_sdhc1_init,
-	.exit = pcm970_sdhc1_exit,
-};
-
-struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2000,
-};
-
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
-{
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
-
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	memset(buf, 0, buf_size);
-
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pcm037_flash,
-	&pcm037_sram_device,
-	&pcm037_mt9t031,
-	&pcm037_mt9v022,
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz Sharp */
-		.name		= "Sharp-LQ035Q7DH06-QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "CMEL-OLED",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.name		= "Sharp-LQ035Q7DH06-QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = CS5_BASE_ADDR,
-		.end     = CS5_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.clock		= 16000000 / 2,
-	.ocr		= 0x40 | 0x18,
-	.cdr		= 0x40,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	int ret;
-
-	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
-			"pcm037");
-
-	if (pcm037_variant() == PCM037_EET)
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
-			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
-	else
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
-			ARRAY_SIZE(pcm037_uart1_handshake_pins),
-			"pcm037_uart1");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
-
-	mxc_register_device(&mxc_w1_master_device, NULL);
-
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
-	/* I2C adapters and devices */
-	i2c_register_board_info(1, pcm037_i2c_devices,
-			ARRAY_SIZE(pcm037_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
-
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-	if (!gpio_usbotg_hs_activate())
-		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
-		mxc_register_device(&mx3_camera, &camera_pdata);
-
-	platform_device_register(&pcm970_sja1000);
-}
-
-static void __init pcm037_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer pcm037_timer = {
-	.init	= pcm037_timer_init,
-};
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
-	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm037_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
deleted file mode 100644
index e3aa829..0000000
--- a/arch/arm/mach-mx3/pcm043.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- *  Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
-#include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.name		= "Sharp-LQ035Q7",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm043_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm043_flash_data,
-	},
-	.resource = &pcm043_flash_resource,
-	.num_resources = 1,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
-	.bitrate = 50000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
-       {
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
-	&pcm043_flash,
-	&mxc_fec_device,
-};
-
-static struct pad_desc pcm043_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* gpio */
-	MX35_PAD_ATA_CS0__GPIO2_6,
-};
-
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-	i2c_register_board_info(0, pcm043_i2c_devices,
-			ARRAY_SIZE(pcm043_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
-#endif
-
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer pcm043_timer = {
-	.init	= pcm043_timer_init,
-};
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
-	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &pcm043_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
deleted file mode 100644
index 044511f..0000000
--- a/arch/arm/mach-mx3/qong.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include "devices.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev)	\
-	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 		0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION		0x00
-
-#define QONG_DNET_ID		1
-#define QONG_DNET_BASEADDR	\
-	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 		0x00001000
-
-#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
-/*
- * This file contains the board-specific initialization routines.
- */
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
-			"uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
-	{
-		.name	= "dnet-memory",
-		.start	= QONG_DNET_BASEADDR,
-		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= QONG_FPGA_IRQ,
-		.end	= QONG_FPGA_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dnet_device = {
-	.name			= "dnet",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(dnet_resources),
-	.resource		= dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
-	int ret;
-
-	ret = platform_device_register(&dnet_device);
-	return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
-	.width = 2,
-};
-
-static struct resource qong_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &qong_flash_data,
-		},
-	.resource = &qong_flash_resource,
-	.num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
-	(void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
-	else
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip >= 0)
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-	else
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
-	.chip = {
-		.chip_delay		= 20,
-		.options		= 0,
-	},
-	.ctrl = {
-		.cmd_ctrl 		= qong_nand_cmd_ctrl,
-		.dev_ready		= qong_nand_device_ready,
-		.select_chip		= qong_nand_select_chip,
-	}
-};
-
-static struct resource qong_nand_resource = {
-	.start  	= CS3_BASE_ADDR,
-	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qong_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
-	/* init CS */
-	__raw_writel(0x00004f00, CSCR_U(3));
-	__raw_writel(0x20013b31, CSCR_L(3));
-	__raw_writel(0x00020800, CSCR_A(3));
-	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
-	/* enable pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
-	/* ready/busy pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
-	/* write protect pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
-	platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
-	void __iomem *regs;
-	u32 fpga_ver;
-
-	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
-				__func__);
-		return;
-	}
-
-	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
-	iounmap(regs);
-	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
-			(fpga_ver & 0xF000) >> 12,
-			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
-	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
-		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
-				"devices won't be registered!\n");
-		return;
-	}
-
-	/* register FPGA-based devices */
-	qong_init_nand_mtd();
-	qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_init_imx_uart();
-	qong_init_nor_mtd();
-	qong_init_fpga();
-}
-
-static void __init qong_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer qong_timer = {
-	.init	= qong_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_QONG data structure.
- */
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
-	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = mx31_map_io,
-	.init_irq       = mx31_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &qong_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 0000000..1576d51
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MX5
+
+config ARCH_MX51
+	bool
+	default y
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 0000000..bf23f86
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y   := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 0000000..9939a19
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 0000000..ed885f9
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
+#define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
+#define BABBAGE_PHY_RESET (1*32 +5)	/* GPIO_2_5 */
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET			0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ	0x02
+
+static struct platform_device *devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_EIM_D25__UART3_RXD,
+	MX51_PAD_EIM_D26__UART3_TXD,
+	MX51_PAD_EIM_D27__UART3_RTS,
+	MX51_PAD_EIM_D24__UART3_CTS,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+
+	/* USB HUB reset line*/
+	MX51_PAD_GPIO_1_7__GPIO1_7,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+static int gpio_usbh1_active(void)
+{
+	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
+	struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+	int ret;
+
+	/* Set USBH1_STP to GPIO and toggle it */
+	mxc_iomux_v3_setup_pad(&usbh1stp_gpio);
+	ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
+
+	if (ret) {
+		pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
+		return ret;
+	}
+	gpio_direction_output(BABBAGE_USBH1_STP, 0);
+	gpio_set_value(BABBAGE_USBH1_STP, 1);
+	msleep(100);
+	gpio_free(BABBAGE_USBH1_STP);
+
+	/* De-assert USB PHY RESETB */
+	mxc_iomux_v3_setup_pad(&phyreset_gpio);
+	ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
+
+	if (ret) {
+		pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
+		return ret;
+	}
+	gpio_direction_output(BABBAGE_PHY_RESET, 1);
+	return 0;
+}
+
+static inline void babbage_usbhub_reset(void)
+{
+	int ret;
+
+	/* Bring USB hub out of reset */
+	ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
+
+	/* USB HUB RESET - De-assert USB HUB RESET_N */
+	msleep(1);
+	gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
+	msleep(1);
+	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
+}
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	u32 usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	u32 usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init babbage_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", babbage_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+
+	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+					ARRAY_SIZE(mx51babbage_pads));
+	mxc_init_imx_uart();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+
+	gpio_usbh1_active();
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	/* setback USBH1_STP to be function */
+	mxc_iomux_v3_setup_pad(&usbh1stp);
+	babbage_usbhub_reset();
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+	.phys_io = MX51_AIPS1_BASE_ADDR,
+	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 0000000..d9f612d
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,871 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+static struct clk usboh3_clk;
+
+#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+	u32 reg;
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+	reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+			   struct clk *m1, struct clk *m2, struct clk *m3)
+{
+	if (parent == m0)
+		return 0;
+	else if (parent == m1)
+		return 1;
+	else if (parent == m2)
+		return 2;
+	else if (parent == m3)
+		return 3;
+	else
+		BUG();
+
+	return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+	if (pll == &pll1_main_clk)
+		return MX51_DPLL1_BASE;
+	else if (pll == &pll2_sw_clk)
+		return MX51_DPLL2_BASE;
+	else if (pll == &pll3_sw_clk)
+		return MX51_DPLL3_BASE;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+	void __iomem *pllbase;
+	s64 temp;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	/* Sign extend to 32-bits */
+	if (mfn >= 0x04000000) {
+		mfn |= 0xFC000000;
+		mfn_abs = -mfn;
+	}
+
+	ref_clk = 2 * parent_rate;
+	if (dbl != 0)
+		ref_clk *= 2;
+
+	ref_clk /= (pdf + 1);
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd + 1);
+	if (mfn < 0)
+		temp = -temp;
+	temp = (ref_clk * mfi) + temp;
+
+	return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	long mfi, pdf, mfn, mfd = 999999;
+	s64 temp64;
+	unsigned long quad_parent_rate;
+	unsigned long pll_hfsm, dp_ctl;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pllbase = _get_pll_base(clk);
+
+	quad_parent_rate = 4 * parent_rate;
+	pdf = mfi = -1;
+	while (++pdf < 16 && mfi < 5)
+		mfi = rate * (pdf+1) / quad_parent_rate;
+	if (mfi > 15)
+		return -EINVAL;
+	pdf--;
+
+	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+	do_div(temp64, quad_parent_rate/1000000);
+	mfn = (long)temp64;
+
+	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+	/* use dpdck0_2 */
+	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+	} else {
+		reg = mfi << 4 | pdf;
+		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+	int i = 0;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+		if (reg & MXC_PLL_DP_CTL_LRF)
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: pll locking failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+	u32 reg;
+	void __iomem *pllbase;
+
+	pllbase = _get_pll_base(clk);
+	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, step;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	/* When switching from pll_main_clk to a bypass clock, first select a
+	 * multiplexed clock in 'step_sel', then shift the glitchless mux
+	 * 'pll1_sw_clk_sel'.
+	 *
+	 * When switching back, do it in reverse order
+	 */
+	if (parent == &pll1_main_clk) {
+		/* Switch to pll1_main_clk */
+		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* step_clk mux switched to lp_apm, to save power. */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+				MXC_CCM_CCSR_STEP_SEL_OFFSET);
+	} else {
+		if (parent == &lp_apm_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+		} else  if (parent == &pll2_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+		} else  if (parent == &pll3_sw_clk) {
+			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+		} else
+			return -EINVAL;
+
+		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+		__raw_writel(reg, MXC_CCM_CCSR);
+		/* Switch to step_clk */
+		reg = __raw_readl(MXC_CCM_CCSR);
+		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+	}
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (clk->parent == &pll2_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+	} else if (clk->parent == &pll3_sw_clk) {
+		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+	} else
+		div = 1;
+	return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CCSR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+	else
+		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+	return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	if (parent == &osc_clk)
+		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CCSR);
+
+	return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+	u32 cacrr, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	cacrr = __raw_readl(MXC_CCM_CACRR);
+	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+	return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+	int i = 0;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: Set parent for periph_apm clock failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+
+	if (parent == &pll2_sw_clk)
+		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else if (parent == &periph_apm_clk)
+		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	return 0;
+}
+
+static struct clk main_bus_clk = {
+	.parent = &pll2_sw_clk,
+	.set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+	return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+	int i = 0;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCDR);
+
+	/* Wait for lock */
+	do {
+		reg = __raw_readl(MXC_CCM_CDHIPR);
+		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+			break;
+
+		udelay(1);
+	} while (++i < MAX_DPLL_WAIT_TRIES);
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("MX5: clk_ahb_set_rate failed\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8)
+		div = 8;
+	else if (div == 0)
+		div++;
+	return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_enable(clk);
+
+	/* Handshake with MAX when LPM is entered. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_disable_inwait(clk);
+
+	/* No Handshake with MAX when LPM is entered as its disabled. */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+	return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+	u32 reg, prediv1, prediv2, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+		/* the main_bus_clk is the one before the DVFS engine */
+		reg = __raw_readl(MXC_CCM_CBCDR);
+		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+		return parent_rate / (prediv1 * prediv2 * podf);
+	} else if (clk->parent == &ipg_clk)
+		return parent_rate;
+	else
+		BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CBCMR);
+
+	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+	if (parent == &ipg_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+	else if (parent == &lp_apm_clk)
+		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+	else if (parent != &main_bus_clk)
+		return -EINVAL;
+
+	__raw_writel(reg, MXC_CCM_CBCMR);
+
+	return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 reg, prediv, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CSCDR1);
+	prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+		  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+	podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+		MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+	return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+		       &lp_apm_clk);
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static unsigned long clk_usboh3_get_rate(struct clk *clk)
+{
+	u32 reg, prediv, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CSCDR1);
+	prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
+		  MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
+	podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
+		MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
+
+	return parent_rate / (prediv * podf);
+}
+
+static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+		       &lp_apm_clk);
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+	return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+	return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+	.get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+	.get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * 	CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+	.parent = &pll1_main_clk,
+	.set_parent = _clk_pll1_sw_set_parent,
+	.get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+	.parent = &osc_clk,
+	.get_rate = clk_pll_get_rate,
+	.set_rate = _clk_pll_set_rate,
+	.set_parent = _clk_pll2_sw_set_parent,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+	.parent = &osc_clk,
+	.set_rate = _clk_pll_set_rate,
+	.get_rate = clk_pll_get_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+	.parent = &osc_clk,
+	.set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+	.parent = &pll1_sw_clk,
+	.set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+	.parent = &pll1_sw_clk,
+	.get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &main_bus_clk,
+	.get_rate = clk_ahb_get_rate,
+	.set_rate = _clk_ahb_set_rate,
+	.round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+	.parent = &ahb_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+	.parent = &lp_apm_clk,
+	.get_rate = clk_ipg_per_get_rate,
+	.set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_uart_get_rate,
+	.set_parent = _clk_uart_set_parent,
+};
+
+static struct clk usboh3_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_usboh3_get_rate,
+	.set_parent = _clk_usboh3_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+	.enable = _clk_max_enable,
+	.disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+	.id = 0,
+	.parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= _clk_ccgr_enable,	\
+		.disable	= _clk_ccgr_disable,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+   get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+	NULL,  NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+	NULL,  NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+       { \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c,   \
+       },
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+};
+
+static void clk_tree_init(void)
+{
+	u32 reg;
+
+	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+	/*
+	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+	 * 8MHz, its derived from lp_apm.
+	 *
+	 * FIXME: Verify if true for all boards
+	 */
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+	__raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2)
+{
+	int i;
+
+	external_low_reference = ckil;
+	external_high_reference = ckih1;
+	ckih2_reference = ckih2;
+	oscillator_reference = osc;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	clk_tree_init();
+
+	clk_enable(&cpu_clk);
+	clk_enable(&main_bus_clk);
+
+	/* set the usboh3_clk parent to pll2_sw_clk */
+	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
+
+	/* System timer */
+	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+		MX51_MXC_INT_GPT);
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 0000000..2d37785
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int cpu_silicon_rev = -1;
+
+#define SI_REV 0x48
+
+static void query_silicon_parameter(void)
+{
+	void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
+	u32 rev;
+
+	if (!rom) {
+		cpu_silicon_rev = -EINVAL;
+		return;
+	}
+
+	rev = readl(rom + SI_REV);
+	switch (rev) {
+	case 0x1:
+		cpu_silicon_rev = MX51_CHIP_REV_1_0;
+		break;
+	case 0x2:
+		cpu_silicon_rev = MX51_CHIP_REV_1_1;
+		break;
+	case 0x10:
+		cpu_silicon_rev = MX51_CHIP_REV_2_0;
+		break;
+	case 0x20:
+		cpu_silicon_rev = MX51_CHIP_REV_3_0;
+		break;
+	default:
+		cpu_silicon_rev = 0;
+	}
+
+	iounmap(rom);
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx51
+ */
+int mx51_revision(void)
+{
+	if (!cpu_is_mx51())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		query_silicon_parameter();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx51_revision);
+
+static int __init post_cpu_init(void)
+{
+	unsigned int reg;
+	void __iomem *base;
+
+	if (!cpu_is_mx51())
+		return 0;
+
+	base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+	__raw_writel(0x0, base + 0x40);
+	__raw_writel(0x0, base + 0x44);
+	__raw_writel(0x0, base + 0x48);
+	__raw_writel(0x0, base + 0x4C);
+	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+	__raw_writel(reg, base + 0x50);
+
+	return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 0000000..c776b9a
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_MFNMINUS		0x14
+#define MXC_PLL_DP_MFNPLUS		0x18
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+#define MXC_PLL_DP_MFN_TOGC		0x28
+#define MXC_PLL_DP_DESTAT		0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_CONFIG_BIST		0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
+#define MXC_PLL_DP_CONFIG_AREN		0x2
+#define MXC_PLL_DP_CONFIG_LDREQ		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0x0
+#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN		(1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
+#define MXC_CCM_CCR_FPM_EN		(1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
+#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY	(1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
+#define MXC_CCM_CSR_FPM_READY	(1 << 1)
+#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
+						    1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
+#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1				(0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK				0x3
+#define MXC_CCM_CCGRx_MOD_OFF				0x0
+#define MXC_CCM_CCGRx_MOD_ON				0x3
+#define MXC_CCM_CCGRx_MOD_IDLE				0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET			30
+#define MXC_CCM_CCGRx_CG14_OFFSET			28
+#define MXC_CCM_CCGRx_CG13_OFFSET			26
+#define MXC_CCM_CCGRx_CG12_OFFSET			24
+#define MXC_CCM_CCGRx_CG11_OFFSET			22
+#define MXC_CCM_CCGRx_CG10_OFFSET			20
+#define MXC_CCM_CCGRx_CG9_OFFSET			18
+#define MXC_CCM_CCGRx_CG8_OFFSET			16
+#define MXC_CCM_CCGRx_CG7_OFFSET			14
+#define MXC_CCM_CCGRx_CG6_OFFSET			12
+#define MXC_CCM_CCGRx_CG5_OFFSET			10
+#define MXC_CCM_CCGRx_CG4_OFFSET			8
+#define MXC_CCM_CCGRx_CG3_OFFSET			6
+#define MXC_CCM_CCGRx_CG2_OFFSET			4
+#define MXC_CCM_CCGRx_CG1_OFFSET			2
+#define MXC_CCM_CCGRx_CG0_OFFSET			0
+
+#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET	8
+#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR		1
+#define MXC_SRPGCR_PCR		1
+#define MXC_EMPGCR_PCR		1
+#define MXC_PGSR_PSR		1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 0000000..7130449
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MX51_UART1_BASE_ADDR,
+		.end = MX51_UART1_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART1,
+		.end = MX51_MXC_INT_UART1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MX51_UART2_BASE_ADDR,
+		.end = MX51_UART2_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART2,
+		.end = MX51_MXC_INT_UART2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MX51_UART3_BASE_ADDR,
+		.end = MX51_UART3_BASE_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX51_MXC_INT_UART3,
+		.end = MX51_MXC_INT_UART3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+	{
+		.start	= MX51_MXC_FEC_BASE_ADDR,
+		.end	= MX51_MXC_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX51_MXC_INT_FEC,
+		.end	= MX51_MXC_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_fec_device = {
+	.name = "fec",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fec_resources),
+	.resource = mxc_fec_resources,
+};
+
+static u64 usb_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource usbotg_resources[] = {
+	{
+		.start = MX51_OTG_BASE_ADDR,
+		.end = MX51_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_USB_OTG,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* OTG gadget device */
+struct platform_device mxc_usbdr_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(usbotg_resources),
+	.resource	= usbotg_resources,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device mxc_usbdr_host_device = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(usbotg_resources),
+	.resource = usbotg_resources,
+	.dev = {
+		.dma_mask = &usb_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource usbh1_resources[] = {
+	{
+		.start = MX51_OTG_BASE_ADDR + 0x200,
+		.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_USB_H1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1_device = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(usbh1_resources),
+	.resource = usbh1_resources,
+	.dev = {
+		.dma_mask = &usb_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX51_WDOG_BASE_ADDR,
+		.end = MX51_WDOG_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
+
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START
+	},
+	{
+		.chip.label = "gpio-1",
+		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
+	},
+	{
+		.chip.label = "gpio-2",
+		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
+	},
+	{
+		.chip.label = "gpio-3",
+		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
+	},
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 0000000..c879ae7
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,8 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_usbdr_host_device;
+extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbdr_udc_device;
+extern struct platform_device mxc_wdt;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 0000000..b7677ef
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual = MX51_IRAM_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+		.length = MX51_IRAM_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+		.length = MX51_DEBUG_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+		.length = MX51_AIPS1_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+		.length = MX51_SPBA0_SIZE,
+		.type = MT_DEVICE
+	}, {
+		.virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+		.length = MX51_AIPS2_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX51);
+	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+	unsigned long tzic_addr;
+	void __iomem *tzic_virt;
+
+	if (mx51_revision() < MX51_CHIP_REV_2_0)
+		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
+	else
+		tzic_addr = MX51_TZIC_BASE_ADDR;
+
+	tzic_virt = ioremap(tzic_addr, SZ_16K);
+	if (!tzic_virt)
+		panic("unable to map TZIC interrupt controller\n");
+
+	tzic_init_irq(tzic_virt);
+}
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
index ecfa37f..5c85075 100644
--- a/arch/arm/mach-mxc91231/clock.c
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -624,7 +624,6 @@ static struct clk_lookup lookups[] = {
 int __init mxc91231_clocks_init(unsigned long fref)
 {
 	void __iomem *gpt_base;
-	int i;
 
 	ckih_rate = fref;
 
@@ -632,8 +631,7 @@ int __init mxc91231_clocks_init(unsigned long fref)
 	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
 	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
 	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 7dbe4ca..69816ba 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -55,7 +55,7 @@ struct sys_timer zn5_timer = {
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
 	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
 	.map_io		= mxc91231_map_io,
 	.init_irq	= mxc91231_init_irq,
 	.timer		= &zn5_timer,
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index 1d844e2..5b84bcd 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,6 +23,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/err.h>
+#include <linux/gfp.h>
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 11b9d5b..e96339e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x00100000		@ physical
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index 181a78b..f009b54 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 3c5e0f5..71f3ea6 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_GPIO
 
 endmenu
 
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 36f67fb..a6bbd1a 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o gpio.o
+obj-y			+= clock.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6..841d459 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -32,13 +32,12 @@
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
-#include "clock.h"
 
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_addr",
@@ -202,11 +201,6 @@ static struct amba_device *amba_devs[] __initdata = {
 	&uart1_device,
 };
 
-/* We have a fixed clock alone, by now */
-static struct clk nhk8815_clk_48 = {
-	.rate = 48*1000*1000,
-};
-
 static struct resource nhk8815_eth_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -276,10 +270,8 @@ static void __init nhk8815_platform_init(void)
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
-	}
 }
 
 MACHINE_START(NOMADIK, "NHK8815")
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 9f92502..f035f41 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -32,14 +32,40 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* Create a clock structure with the given name */
-int nmdk_clk_create(struct clk *clk, const char *dev_id)
-{
-	struct clk_lookup *clkdev;
+static struct clk clk_24 = {
+	.rate = 2400000,
+};
+
+static struct clk clk_48 = {
+	.rate = 48 * 1000 * 1000,
+};
+
+/*
+ * Catch-all default clock to satisfy drivers using the clk API.  We don't
+ * model the actual hardware clocks yet.
+ */
+static struct clk clk_default;
+
+#define CLK(_clk, dev)				\
+	{					\
+		.clk		= _clk,		\
+		.dev_id		= dev,		\
+	}
 
-	clkdev = clkdev_alloc(clk, NULL, dev_id);
-	if (!clkdev)
-		return -ENOMEM;
-	clkdev_add(clkdev);
+static struct clk_lookup lookups[] = {
+	CLK(&clk_24, "mtu0"),
+	CLK(&clk_24, "mtu1"),
+	CLK(&clk_48, "uart0"),
+	CLK(&clk_48, "uart1"),
+	CLK(&clk_default, "gpio.0"),
+	CLK(&clk_default, "gpio.1"),
+	CLK(&clk_default, "gpio.2"),
+	CLK(&clk_default, "gpio.3"),
+	CLK(&clk_default, "rng"),
+};
+
+int __init clk_init(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
index 235faec..78da2e7 100644
--- a/arch/arm/mach-nomadik/clock.h
+++ b/arch/arm/mach-nomadik/clock.h
@@ -11,4 +11,5 @@
 struct clk {
 	unsigned long		rate;
 };
-extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
+
+int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index f93c596..ac58e3b 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
@@ -30,73 +31,93 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
+
+#define GPIO_RESOURCE(block)						\
+	{								\
+		.start	= NOMADIK_GPIO##block##_BASE,			\
+		.end	= NOMADIK_GPIO##block##_BASE + SZ_4K - 1,	\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+	{								\
+		.start	= IRQ_GPIO##block,				\
+		.end	= IRQ_GPIO##block,				\
+		.flags	= IORESOURCE_IRQ,				\
+	}
+
+#define GPIO_DEVICE(block)						\
+	{								\
+		.name 		= "gpio",				\
+		.id		= block,				\
+		.num_resources 	= 2,					\
+		.resource	= &cpu8815_gpio_resources[block * 2],	\
+		.dev = {						\
+			.platform_data = &cpu8815_gpio[block],		\
+		},							\
+	}
+
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
 		.name = "GPIO-0-31",
 		.first_gpio = 0,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
-		.parent_irq = IRQ_GPIO0,
 	}, {
 		.name = "GPIO-32-63",
 		.first_gpio = 32,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
-		.parent_irq = IRQ_GPIO1,
 	}, {
 		.name = "GPIO-64-95",
 		.first_gpio = 64,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
-		.parent_irq = IRQ_GPIO2,
 	}, {
 		.name = "GPIO-96-127", /* 124..127 not routed to pin */
 		.first_gpio = 96,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
-		.parent_irq = IRQ_GPIO3,
 	}
 };
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static struct resource cpu8815_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+};
 
-static struct amba_device cpu8815_amba_gpio[] = {
-	{
-		.dev = {
-			.init_name = "gpio0",
-			.platform_data = cpu8815_gpio + 0,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio1",
-			.platform_data = cpu8815_gpio + 1,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio2",
-			.platform_data = cpu8815_gpio + 2,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio3",
-			.platform_data = cpu8815_gpio + 3,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+static struct platform_device cpu8815_platform_gpio[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
+};
+
+static struct amba_device cpu8815_amba_rng = {
+	.dev = {
+		.init_name = "rng",
 	},
+	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
+};
+
+static struct platform_device *platform_devs[] __initdata = {
+	cpu8815_platform_gpio + 0,
+	cpu8815_platform_gpio + 1,
+	cpu8815_platform_gpio + 2,
+	cpu8815_platform_gpio + 3,
 };
 
 static struct amba_device *amba_devs[] __initdata = {
-	cpu8815_amba_gpio + 0,
-	cpu8815_amba_gpio + 1,
-	cpu8815_amba_gpio + 2,
-	cpu8815_amba_gpio + 3,
+	&cpu8815_amba_rng
 };
 
 static int __init cpu8815_init(void)
 {
 	int i;
 
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
 	return 0;
@@ -124,6 +145,12 @@ void __init cpu8815_init_irq(void)
 	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 /*
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
deleted file mode 100644
index 9a09b27..0000000
--- a/arch/arm/mach-nomadik/gpio.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Generic GPIO driver for logic cells found in the Nomadik SoC
- *
- * Copyright (C) 2008,2009 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-
-/*
- * The GPIO module in the Nomadik family of Systems-on-Chip is an
- * AMBA device, managing 32 pins and alternate functions.  The logic block
- * is currently only used in the Nomadik.
- *
- * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
- */
-
-#define NMK_GPIO_PER_CHIP 32
-struct nmk_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem *addr;
-	unsigned int parent_irq;
-	spinlock_t *lock;
-	/* Keep track of configured edges */
-	u32 edge_rising;
-	u32 edge_falling;
-};
-
-/* Mode functions */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 afunc, bfunc, bit;
-
-	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
-	if (gpio_mode & NMK_GPIO_ALT_A)
-		afunc |= bit;
-	if (gpio_mode & NMK_GPIO_ALT_B)
-		bfunc |= bit;
-	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
-	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(nmk_gpio_set_mode);
-
-int nmk_gpio_get_mode(int gpio)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	u32 afunc, bfunc, bit;
-
-	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
-
-	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
-}
-EXPORT_SYMBOL(nmk_gpio_get_mode);
-
-
-/* IRQ functions */
-static inline int nmk_gpio_get_bitmask(int gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-static void nmk_gpio_irq_ack(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	if (!nmk_chip)
-		return;
-	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
-}
-
-static void nmk_gpio_irq_mask(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask, reg;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return;
-
-	/* we must individually clear the two edges */
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-		reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
-	}
-	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-		reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
-	}
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-};
-
-static void nmk_gpio_irq_unmask(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask, reg;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return;
-
-	/* we must individually set the two edges */
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-		reg |= bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
-	}
-	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-		reg |= bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
-	}
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-}
-
-static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return -EINVAL;
-
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		return -EINVAL;
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-
-	nmk_chip->edge_rising &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_RISING)
-		nmk_chip->edge_rising |= bitmask;
-	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
-
-	nmk_chip->edge_falling &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		nmk_chip->edge_falling |= bitmask;
-	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
-
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	nmk_gpio_irq_unmask(irq);
-
-	return 0;
-}
-
-static struct irq_chip nmk_gpio_irq_chip = {
-	.name		= "Nomadik-GPIO",
-	.ack		= nmk_gpio_irq_ack,
-	.mask		= nmk_gpio_irq_mask,
-	.unmask		= nmk_gpio_irq_unmask,
-	.set_type	= nmk_gpio_irq_set_type,
-};
-
-static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct irq_chip *host_chip;
-	unsigned int gpio_irq;
-	u32 pending;
-	unsigned int first_irq;
-
-	nmk_chip = get_irq_data(irq);
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
-		gpio_irq = first_irq + __ffs(pending);
-		generic_handle_irq(gpio_irq);
-	}
-	if (0) {/* don't ack parent irq, as ack == disable */
-		host_chip = get_irq_chip(irq);
-		host_chip->ack(irq);
-	}
-}
-
-static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
-{
-	unsigned int first_irq;
-	int i;
-
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
-		set_irq_chip(i, &nmk_gpio_irq_chip);
-		set_irq_handler(i, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-		set_irq_chip_data(i, nmk_chip);
-	}
-	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
-	set_irq_data(nmk_chip->parent_irq, nmk_chip);
-	return 0;
-}
-
-/* I/O Functions */
-static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
-	return 0;
-}
-
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	return 0;
-}
-
-static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
-
-	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
-}
-
-static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
-
-	if (val)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
-	else
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-/* This structure is replicated for each GPIO block allocated at probe time */
-static struct gpio_chip nmk_gpio_template = {
-	.direction_input	= nmk_gpio_make_input,
-	.get			= nmk_gpio_get_input,
-	.direction_output	= nmk_gpio_make_output,
-	.set			= nmk_gpio_set_output,
-	.ngpio			= NMK_GPIO_PER_CHIP,
-	.can_sleep		= 0,
-};
-
-static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
-{
-	struct nmk_gpio_platform_data *pdata;
-	struct nmk_gpio_chip *nmk_chip;
-	struct gpio_chip *chip;
-	int ret;
-
-	pdata = dev->dev.platform_data;
-	ret = amba_request_regions(dev, pdata->name);
-	if (ret)
-		return ret;
-
-	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
-	if (!nmk_chip) {
-		ret = -ENOMEM;
-		goto out_amba;
-	}
-	/*
-	 * The virt address in nmk_chip->addr is in the nomadik register space,
-	 * so we can simply convert the resource address, without remapping
-	 */
-	nmk_chip->addr = io_p2v(dev->res.start);
-	nmk_chip->chip = nmk_gpio_template;
-	nmk_chip->parent_irq = pdata->parent_irq;
-
-	chip = &nmk_chip->chip;
-	chip->base = pdata->first_gpio;
-	chip->label = pdata->name;
-	chip->dev = &dev->dev;
-	chip->owner = THIS_MODULE;
-
-	ret = gpiochip_add(&nmk_chip->chip);
-	if (ret)
-		goto out_free;
-
-	amba_set_drvdata(dev, nmk_chip);
-
-	nmk_gpio_init_irq(nmk_chip);
-
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
-	return 0;
-
- out_free:
-	kfree(nmk_chip);
- out_amba:
-	amba_release_regions(dev);
-	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
-		  pdata->first_gpio, pdata->first_gpio+31);
-	return ret;
-}
-
-static int nmk_gpio_remove(struct amba_device *dev)
-{
-	struct nmk_gpio_chip *nmk_chip;
-
-	nmk_chip = amba_get_drvdata(dev);
-	gpiochip_remove(&nmk_chip->chip);
-	kfree(nmk_chip);
-	amba_release_regions(dev);
-	return 0;
-}
-
-
-/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
-static struct amba_id nmk_gpio_ids[] = {
-	{
-		.id	= 0x1f080060,
-		.mask	= 0xffefffff,
-	},
-	{0, 0},
-};
-
-static struct amba_driver nmk_gpio_driver = {
-	.drv = {
-		.owner = THIS_MODULE,
-		.name = "gpio",
-		},
-	.probe = nmk_gpio_probe,
-	.remove = nmk_gpio_remove,
-	.suspend = NULL, /* to be done */
-	.resume = NULL,
-	.id_table = nmk_gpio_ids,
-};
-
-static int __init nmk_gpio_init(void)
-{
-	return amba_driver_register(&nmk_gpio_driver);
-}
-
-arch_initcall(nmk_gpio_init);
-
-MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
-MODULE_DESCRIPTION("Nomadik GPIO Driver");
-MODULE_LICENSE("GPL");
-
-
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e876990..4f92acf 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x10000000	@ physical base address
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 61577c9..7a81a04 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,71 +1,6 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
 
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int parent_irq;
-};
+#include <plat/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
index be12e31..f83d574 100644
--- a/arch/arm/mach-nomadik/include/mach/vmalloc.h
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -1,2 +1,2 @@
 
-#define VMALLOC_END       0xe8000000
+#define VMALLOC_END       0xe8000000UL
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index c9530fb..5c934bd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -8,10 +8,11 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
index 1b12d32..770a68c 100644
--- a/arch/arm/mach-ns9xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -20,50 +20,49 @@ static void putc_dummy(char c, void __iomem *base)
 	/* nothing */
 }
 
+static int timeout;
+
 static void putc_ns9360(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@ static void putc_ns921x(char c, void __iomem *base)
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
+	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
index fe964d3..c865197 100644
--- a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END     (0xf0000000)
+#define VMALLOC_END     (0xf0000000UL)
 
 #endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 795b15e..463e924 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -10,6 +10,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 #include <mach/board.h>
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index abee833..aed1999 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -10,7 +10,6 @@
  */
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
new file mode 100644
index 0000000..2bc40a2
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_NUC93X
+
+config CPU_NUC932
+	bool
+	help
+	  Support for NUC932 of Nuvoton NUC93X CPUs.
+
+menu "NUC932 Machines"
+
+config MACH_NUC932EVB
+	bool "Nuvoton NUC932 Evaluation Board"
+	default y
+	select CPU_NUC932
+	help
+	   Say Y here if you are using the Nuvoton NUC932EVB
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
new file mode 100644
index 0000000..440e2de
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y				:= irq.o time.o dev.o cpu.o clock.o
+# NUC932 CPU support files
+
+obj-$(CONFIG_CPU_NUC932)	+= nuc932.o
+
+# machine support
+
+obj-$(CONFIG_MACH_NUC932EVB)	+= mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
new file mode 100644
index 0000000..a057b54
--- /dev/null
+++ b/arch/arm/mach-nuc93x/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
new file mode 100644
index 0000000..0521efb
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->enabled++ == 0)
+		(clk->enable)(clk, 1);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (--clk->enabled == 0)
+		(clk->enable)(clk, 0);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 27000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void nuc93x_clk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(NUC93X_VA_CLKPWR);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, NUC93X_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		clkdev_add(&clks[i]);
+}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
new file mode 100644
index 0000000..18e51be
--- /dev/null
+++ b/arch/arm/mach-nuc93x/clock.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/mach-nuc93x/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void nuc93x_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+	unsigned long		cken;
+	unsigned int		enabled;
+	void			(*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= nuc93x_clk_enable,		\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+#define DEF_CLKLOOK(_clk, _devname, _conname)		\
+	{						\
+		.clk		= _clk,			\
+		.dev_id		= _devname,		\
+		.con_id		= _conname,		\
+	}
+
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
new file mode 100644
index 0000000..f6ff5d8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-nuc93x/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC93x series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc93x_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+};
+
+/* Initial nuc932 clock declarations. */
+static DEFINE_CLK(audio, 2);
+static DEFINE_CLK(sd, 3);
+static DEFINE_CLK(jpg, 4);
+static DEFINE_CLK(video, 5);
+static DEFINE_CLK(vpost, 6);
+static DEFINE_CLK(2d, 7);
+static DEFINE_CLK(gpu, 8);
+static DEFINE_CLK(gdma, 9);
+static DEFINE_CLK(adc, 10);
+static DEFINE_CLK(uart, 11);
+static DEFINE_CLK(spi, 12);
+static DEFINE_CLK(pwm, 13);
+static DEFINE_CLK(timer, 14);
+static DEFINE_CLK(wdt, 15);
+static DEFINE_CLK(ac97, 16);
+static DEFINE_CLK(i2s, 16);
+static DEFINE_CLK(usbck, 17);
+static DEFINE_CLK(usb48, 18);
+static DEFINE_CLK(usbh, 19);
+static DEFINE_CLK(i2c, 20);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc932_clkregs[] = {
+       DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
+       DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
+       DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
+       DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
+       DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
+       DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
+       DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
+       DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
+       DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
+       DEF_CLKLOOK(&clk_uart, NULL, "uart"),
+       DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
+       DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
+       DEF_CLKLOOK(&clk_timer, NULL, "timer"),
+       DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
+       DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
+       DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
+       DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
+       DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
+       DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
+       DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
+       DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc93x_uart_data[] = {
+	NUC93X_8250PORT(UART0),
+	{},
+};
+
+struct platform_device nuc93x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= nuc93x_uart_data,
+	},
+};
+
+/*Init NUC93x evb io*/
+
+void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
+
+	idcode = __raw_readl(NUC93XPDID);
+	if (idcode == NUC932_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else
+		printk(KERN_ERR "CPU type detect error!\n");
+
+}
+
+/*Init NUC93x clock*/
+
+void __init nuc93x_init_clocks(void)
+{
+	clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
+}
+
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
new file mode 100644
index 0000000..9def28197
--- /dev/null
+++ b/arch/arm/mach-nuc93x/cpu.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-nuc93x/cpu.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Header file for NUC93X CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define IODESC_ENT(y)					\
+{							\
+	.virtual = (unsigned long)NUC93X_VA_##y,	\
+	.pfn     = __phys_to_pfn(NUC93X_PA_##y),	\
+	.length  = NUC93X_SZ_##y,			\
+	.type    = MT_DEVICE,				\
+}
+
+#define NUC93X_8250PORT(name)					\
+{								\
+	.membase	= name##_BA,				\
+	.mapbase	= name##_PA,				\
+	.irq		= IRQ_##name,				\
+	.uartclk	= 57139200,				\
+	.regshift	= 2,					\
+	.iotype		= UPIO_MEM,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
+}
+
+/*Cpu identifier register*/
+
+#define NUC93XPDID	NUC93X_VA_GCR
+#define NUC932_CPUID	0x29550091
+
+/* extern file from cpu.c */
+
+extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
+extern void nuc93x_init_clocks(void);
+extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc93x_board_init(struct platform_device **device, int size);
+extern struct platform_device nuc93x_serial_device;
+
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
new file mode 100644
index 0000000..a962ae9
--- /dev/null
+++ b/arch/arm/mach-nuc93x/dev.c
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/arm/mach-nuc93x/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include "cpu.h"
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc93x_public_dev[] __initdata = {
+	&nuc93x_serial_device,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc93x_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
new file mode 100644
index 0000000..1352cbd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/entry-macro.S
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #AIC_BA
+
+		ldr	\irqnr, [ \base, #AIC_IPER]
+		ldr	\irqnr, [ \base, #AIC_ISNR]
+		cmp	\irqnr, #0
+
+	.endm
+
+	/* currently don't need an disable_fiq macro */
+
+	.macro	disable_fiq
+	.endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
new file mode 100644
index 0000000..fb5c6fc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/hardware.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/hardware.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
new file mode 100644
index 0000000..72e5051
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/io.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+
+#define __mem_pci(a)	(a)
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
new file mode 100644
index 0000000..7c4aa71
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/irqs.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/irqs.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NUC93X_IRQ(x)	(x)
+
+/* Main cpu interrupts */
+
+#define IRQ_WDT		NUC93X_IRQ(1)
+#define IRQ_IRQ0	NUC93X_IRQ(2)
+#define IRQ_IRQ1	NUC93X_IRQ(3)
+#define IRQ_IRQ2	NUC93X_IRQ(4)
+#define IRQ_IRQ3	NUC93X_IRQ(5)
+#define IRQ_USBH	NUC93X_IRQ(6)
+#define IRQ_APU		NUC93X_IRQ(7)
+#define IRQ_VPOST	NUC93X_IRQ(8)
+#define IRQ_ADC		NUC93X_IRQ(9)
+#define IRQ_UART0	NUC93X_IRQ(10)
+#define IRQ_TIMER0	NUC93X_IRQ(11)
+#define IRQ_GPU0	NUC93X_IRQ(12)
+#define IRQ_GPU1	NUC93X_IRQ(13)
+#define IRQ_GPU2	NUC93X_IRQ(14)
+#define IRQ_GPU3	NUC93X_IRQ(15)
+#define IRQ_GPU4	NUC93X_IRQ(16)
+#define IRQ_VIN		NUC93X_IRQ(17)
+#define IRQ_USBD	NUC93X_IRQ(18)
+#define IRQ_VRAMLD	NUC93X_IRQ(19)
+#define IRQ_GDMA0	NUC93X_IRQ(20)
+#define IRQ_GDMA1	NUC93X_IRQ(21)
+#define IRQ_SDIO	NUC93X_IRQ(22)
+#define IRQ_FMI		NUC93X_IRQ(22)
+#define IRQ_JPEG	NUC93X_IRQ(23)
+#define IRQ_SPI0	NUC93X_IRQ(24)
+#define IRQ_SPI1	NUC93X_IRQ(25)
+#define IRQ_RTC		NUC93X_IRQ(26)
+#define IRQ_PWM0	NUC93X_IRQ(27)
+#define IRQ_PWM1	NUC93X_IRQ(28)
+#define IRQ_PWM2	NUC93X_IRQ(29)
+#define IRQ_PWM3	NUC93X_IRQ(30)
+#define IRQ_I2SAC97	NUC93X_IRQ(31)
+#define IRQ_CAP0	IRQ_PWM0
+#define IRQ_CAP1	IRQ_PWM1
+#define IRQ_CAP2	IRQ_PWM2
+#define IRQ_CAP3	IRQ_PWM3
+#define NR_IRQS		(IRQ_I2SAC97 + 1)
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
new file mode 100644
index 0000000..fd0b5e8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/map.h
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/map.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#define MAP_OFFSET	(0xfff00000)
+#define CLK_OFFSET	(0x10)
+
+#ifndef __ASSEMBLY__
+#define NUC93X_ADDR(x)	((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
+#else
+#define NUC93X_ADDR(x)	(0xF0000000 + ((x)&(~MAP_OFFSET)))
+#endif
+
+ /*
+  * nuc932 hardware register definition
+  */
+
+#define NUC93X_PA_IRQ		(0xFFF83000)
+#define NUC93X_PA_GCR		(0xFFF00000)
+#define NUC93X_PA_EBI		(0xFFF01000)
+#define NUC93X_PA_UART		(0xFFF80000)
+#define NUC93X_PA_TIMER		(0xFFF81000)
+#define NUC93X_PA_GPIO		(0xFFF84000)
+#define NUC93X_PA_GDMA		(0xFFF03000)
+#define NUC93X_PA_USBHOST	(0xFFF0d000)
+#define NUC93X_PA_I2C		(0xFFF89000)
+#define NUC93X_PA_LCD		(0xFFF06000)
+#define NUC93X_PA_GE		(0xFFF05000)
+#define NUC93X_PA_ADC		(0xFFF85000)
+#define NUC93X_PA_RTC		(0xFFF87000)
+#define NUC93X_PA_PWM		(0xFFF82000)
+#define NUC93X_PA_ACTL		(0xFFF0a000)
+#define NUC93X_PA_USBDEV	(0xFFF0C000)
+#define NUC93X_PA_JEPEG		(0xFFF0e000)
+#define NUC93X_PA_CACHE_T	(0xFFF60000)
+#define NUC93X_PA_VRAM		(0xFFF0b000)
+#define NUC93X_PA_DMAC		(0xFFF09000)
+#define NUC93X_PA_I2SM		(0xFFF08000)
+#define NUC93X_PA_CACHE		(0xFFF02000)
+#define NUC93X_PA_GPU		(0xFFF04000)
+#define NUC93X_PA_VIDEOIN	(0xFFF07000)
+#define NUC93X_PA_SPI0		(0xFFF86000)
+#define NUC93X_PA_SPI1		(0xFFF88000)
+
+ /*
+  * nuc932 virtual address mapping.
+  * interrupt controller is the first thing we put in, to make
+  * the assembly code for the irq detection easier
+  */
+
+#define NUC93X_VA_IRQ		NUC93X_ADDR(0x00000000)
+#define NUC93X_SZ_IRQ		SZ_4K
+
+#define NUC93X_VA_GCR		NUC93X_ADDR(NUC93X_PA_IRQ)
+#define NUC93X_VA_CLKPWR	(NUC93X_VA_GCR+CLK_OFFSET)
+#define NUC93X_SZ_GCR		SZ_4K
+
+/* EBI management */
+
+#define NUC93X_VA_EBI		NUC93X_ADDR(NUC93X_PA_EBI)
+#define NUC93X_SZ_EBI		SZ_4K
+
+/* UARTs */
+
+#define NUC93X_VA_UART		NUC93X_ADDR(NUC93X_PA_UART)
+#define NUC93X_SZ_UART		SZ_4K
+
+/* Timers */
+
+#define NUC93X_VA_TIMER	NUC93X_ADDR(NUC93X_PA_TIMER)
+#define NUC93X_SZ_TIMER	SZ_4K
+
+/* GPIO ports */
+
+#define NUC93X_VA_GPIO		NUC93X_ADDR(NUC93X_PA_GPIO)
+#define NUC93X_SZ_GPIO		SZ_4K
+
+/* GDMA control */
+
+#define NUC93X_VA_GDMA		NUC93X_ADDR(NUC93X_PA_GDMA)
+#define NUC93X_SZ_GDMA		SZ_4K
+
+/* I2C hardware controller */
+
+#define NUC93X_VA_I2C		NUC93X_ADDR(NUC93X_PA_I2C)
+#define NUC93X_SZ_I2C		SZ_4K
+
+/* LCD controller*/
+
+#define NUC93X_VA_LCD		NUC93X_ADDR(NUC93X_PA_LCD)
+#define NUC93X_SZ_LCD		SZ_4K
+
+/* 2D controller*/
+
+#define NUC93X_VA_GE		NUC93X_ADDR(NUC93X_PA_GE)
+#define NUC93X_SZ_GE		SZ_4K
+
+/* ADC */
+
+#define NUC93X_VA_ADC		NUC93X_ADDR(NUC93X_PA_ADC)
+#define NUC93X_SZ_ADC		SZ_4K
+
+/* RTC */
+
+#define NUC93X_VA_RTC		NUC93X_ADDR(NUC93X_PA_RTC)
+#define NUC93X_SZ_RTC		SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+
+#define NUC93X_VA_PWM		NUC93X_ADDR(NUC93X_PA_PWM)
+#define NUC93X_SZ_PWM		SZ_4K
+
+/* Audio Controller controller */
+
+#define NUC93X_VA_ACTL		NUC93X_ADDR(NUC93X_PA_ACTL)
+#define NUC93X_SZ_ACTL		SZ_4K
+
+/* USB Device port */
+
+#define NUC93X_VA_USBDEV	NUC93X_ADDR(NUC93X_PA_USBDEV)
+#define NUC93X_SZ_USBDEV	SZ_4K
+
+/* USB host controller*/
+#define NUC93X_VA_USBHOST	NUC93X_ADDR(NUC93X_PA_USBHOST)
+#define NUC93X_SZ_USBHOST	SZ_4K
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
new file mode 100644
index 0000000..323ab0d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/memory.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/memory.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
new file mode 100644
index 0000000..5cb2954
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers  */
+#define CLK_BA		NUC93X_VA_CLKPWR
+#define REG_CLKEN	(CLK_BA + 0x00)
+#define REG_CLKSEL	(CLK_BA + 0x04)
+#define REG_CLKDIV	(CLK_BA + 0x08)
+#define REG_PLLCON0	(CLK_BA + 0x0C)
+#define REG_PLLCON1	(CLK_BA + 0x10)
+#define REG_PMCON	(CLK_BA + 0x14)
+#define REG_IRQWAKECON	(CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
+#define REG_IPSRST	(CLK_BA + 0x20)
+#define REG_CLKEN1	(CLK_BA + 0x24)
+#define REG_CLKDIV1	(CLK_BA + 0x28)
+
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
+#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
new file mode 100644
index 0000000..3c72550
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		NUC93X_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
new file mode 100644
index 0000000..2302159
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* Advance Interrupt Controller (AIC) Registers */
+
+#define AIC_BA    		NUC93X_VA_IRQ
+
+#define REG_AIC_IRQSC		(AIC_BA+0x80)
+#define REG_AIC_GEN		(AIC_BA+0x84)
+#define REG_AIC_GASR		(AIC_BA+0x88)
+#define REG_AIC_GSCR		(AIC_BA+0x8C)
+#define REG_AIC_IRSR		(AIC_BA+0x100)
+#define REG_AIC_IASR		(AIC_BA+0x104)
+#define REG_AIC_ISR		(AIC_BA+0x108)
+#define REG_AIC_IPER		(AIC_BA+0x10C)
+#define REG_AIC_ISNR		(AIC_BA+0x110)
+#define REG_AIC_IMR		(AIC_BA+0x114)
+#define REG_AIC_OISR		(AIC_BA+0x118)
+#define REG_AIC_MECR		(AIC_BA+0x120)
+#define REG_AIC_MDCR		(AIC_BA+0x124)
+#define REG_AIC_SSCR		(AIC_BA+0x128)
+#define REG_AIC_SCCR		(AIC_BA+0x12C)
+#define REG_AIC_EOSCR		(AIC_BA+0x130)
+#define AIC_IPER		(0x10C)
+#define AIC_ISNR		(0x110)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
new file mode 100644
index 0000000..767a047
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define UART0_BA	NUC93X_VA_UART
+#define UART1_BA	(NUC93X_VA_UART+0x100)
+
+#define UART0_PA	NUC93X_PA_UART
+#define UART1_PA	(NUC93X_PA_UART+0x100)
+
+
+#ifndef __ASSEMBLY__
+
+struct nuc93x_uart_clksrc {
+	const char	*name;
+	unsigned int	divisor;
+	unsigned int	min_baud;
+	unsigned int	max_baud;
+};
+
+struct nuc93x_uartcfg {
+	unsigned char	hwport;
+	unsigned char	unused;
+	unsigned short	flags;
+	unsigned long	uart_flags;
+
+	unsigned long	ucon;
+	unsigned long	ulcon;
+	unsigned long	ufcon;
+
+	struct nuc93x_uart_clksrc *clocks;
+	unsigned int	clocks_size;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
new file mode 100644
index 0000000..394be96
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/regs-timer.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_TIMER_H
+#define __ASM_ARCH_REGS_TIMER_H
+
+/* Timer Registers */
+
+#define TMR_BA			NUC93X_VA_TIMER
+#define REG_TCSR0		(TMR_BA+0x00)
+#define REG_TICR0		(TMR_BA+0x08)
+#define REG_TDR0		(TMR_BA+0x10)
+#define REG_TISR		(TMR_BA+0x18)
+#define REG_WTCR		(TMR_BA+0x1C)
+
+#endif /*  __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
new file mode 100644
index 0000000..d26bd9a
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/machnuc93x/include/mach/system.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <asm/proc-fns.h>
+
+static void arch_idle(void)
+{
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	cpu_reset(0);
+}
+
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
new file mode 100644
index 0000000..0c719cc
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/timex.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE Now, I don't use it. */
+
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
new file mode 100644
index 0000000..73082cd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/uncompress.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+/* Defines for UART registers */
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+#include <linux/serial_reg.h>
+
+#define arch_decomp_wdog()
+
+#define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
+static u32 * uart_base = (u32 *)UART0_PA;
+
+static void putc(int ch)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
new file mode 100644
index 0000000..98a21b8
--- /dev/null
+++ b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-nuc93x/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
new file mode 100644
index 0000000..a7a88ea
--- /dev/null
+++ b/arch/arm/mach-nuc93x/irq.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-nuc93x/irq.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+static void nuc93x_irq_mask(unsigned int irq)
+{
+	__raw_writel(1 << irq, REG_AIC_MDCR);
+}
+
+/*
+ * By the w90p910 spec,any irq,only write 1
+ * to REG_AIC_EOSCR for ACK
+ */
+
+static void nuc93x_irq_ack(unsigned int irq)
+{
+	__raw_writel(0x01, REG_AIC_EOSCR);
+}
+
+static void nuc93x_irq_unmask(unsigned int irq)
+{
+	__raw_writel(1 << irq, REG_AIC_MECR);
+
+}
+
+static struct irq_chip nuc93x_irq_chip = {
+	.ack	   = nuc93x_irq_ack,
+	.mask	   = nuc93x_irq_mask,
+	.unmask	   = nuc93x_irq_unmask,
+};
+
+void __init nuc93x_init_irq(void)
+{
+	int irqno;
+
+	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
+
+	for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
+		set_irq_chip(irqno, &nuc93x_irq_chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
new file mode 100644
index 0000000..9f79266
--- /dev/null
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc932.h"
+
+static void __init nuc932evb_map_io(void)
+{
+	nuc932_map_io();
+	nuc932_init_clocks();
+	nuc932_init_uartclk();
+}
+
+static void __init nuc932evb_init(void)
+{
+	nuc932_board_init();
+}
+
+MACHINE_START(NUC932EVB, "NUC932EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= NUC93X_PA_UART,
+	.io_pg_offst	= (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc932evb_map_io,
+	.init_irq	= nuc93x_init_irq,
+	.init_machine	= nuc932evb_init,
+	.timer		= &nuc93x_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
new file mode 100644
index 0000000..3966ead
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-nuc93x/nuc932.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC932 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc932_dev[] __initdata = {
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc932evb_iodesc[] __initdata = {
+};
+
+/*Init NUC932 evb io*/
+
+void __init nuc932_map_io(void)
+{
+	nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
+}
+
+/*Init NUC932 clock*/
+
+void __init nuc932_init_clocks(void)
+{
+	nuc93x_init_clocks();
+}
+
+/*enable NUC932 uart clock*/
+
+void __init nuc932_init_uartclk(void)
+{
+	struct clk *ck_uart = clk_get(NULL, "uart");
+	BUG_ON(IS_ERR(ck_uart));
+
+	clk_enable(ck_uart);
+}
+
+/*Init NUC932 board info*/
+
+void __init nuc932_board_init(void)
+{
+	nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
+}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
new file mode 100644
index 0000000..9a66edd
--- /dev/null
+++ b/arch/arm/mach-nuc93x/nuc932.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-nuc93x/nuc932.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC93x CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc93x_init_irq(void);
+extern struct sys_timer nuc93x_timer;
+
+/* extern file from nuc932.c */
+
+extern void nuc932_board_init(void);
+extern void nuc932_init_clocks(void);
+extern void nuc932_map_io(void);
+extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
new file mode 100644
index 0000000..2f90f9d
--- /dev/null
+++ b/arch/arm/mach-nuc93x/time.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-nuc93x/time.c
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <mach/system.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define RESETINT	0x01
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static unsigned long nuc93x_gettimeoffset(void)
+{
+	return 0;
+}
+
+/*IRQ handler for the timer*/
+
+static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+	return IRQ_HANDLED;
+}
+
+static struct irqaction nuc93x_timer_irq = {
+	.name		= "nuc93x Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= nuc93x_timer_interrupt,
+};
+
+/*Set up timer reg.*/
+
+static void nuc93x_timer_setup(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	struct clk *ck_timer = clk_get(NULL, "timer");
+	unsigned int rate, val = 0;
+
+	BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
+
+	clk_enable(ck_timer);
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(RESETINT, REG_TISR);
+
+	timer0_load = (rate / TICKS_PER_SEC);
+	__raw_writel(timer0_load, REG_TICR0);
+
+	val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
+	__raw_writel(val, REG_TCSR0);
+
+}
+
+static void __init nuc93x_timer_init(void)
+{
+	nuc93x_timer_setup();
+	setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
+}
+
+struct sys_timer nuc93x_timer = {
+	.init		= nuc93x_timer_init,
+	.offset		= nuc93x_gettimeoffset,
+	.resume		= nuc93x_timer_setup
+};
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 27f4897..b18d7c2 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,6 +152,16 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
+config AMS_DELTA_FIQ
+	bool "Fast Interrupt Request (FIQ) support for the E3"
+	depends on MACH_AMS_DELTA
+	select FIQ
+	help
+	  Provide a FIQ handler for the E3.
+	  This allows for fast handling of interrupts generated
+	  by the clock line of the E3 mailboard (or a PS/2 keyboard)
+	  connected to the GPIO based external keyboard port.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ce17f1..ea231c7 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
+obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
new file mode 100644
index 0000000..927d5a1
--- /dev/null
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -0,0 +1,278 @@
+/*
+ *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+ *
+ *  Based on  linux/arch/arm/lib/floppydma.S
+ *  Renamed and modified to work with 2.6 kernel by Matt Callow
+ *  Copyright (C) 1995, 1996 Russell King
+ *  Copyright (C) 2004 Pete Trapps
+ *  Copyright (C) 2006 Matt Callow
+ *  Copyright (C) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#include <plat/io.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+/*
+ * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
+ * Unfortunately, those were not placed in a separate header file.
+ */
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+#define OMAP1510_GPIO_DATA_INPUT	0x00
+#define OMAP1510_GPIO_DATA_OUTPUT	0x04
+#define OMAP1510_GPIO_DIR_CONTROL	0x08
+#define OMAP1510_GPIO_INT_CONTROL	0x0c
+#define OMAP1510_GPIO_INT_MASK		0x10
+#define OMAP1510_GPIO_INT_STATUS	0x14
+#define OMAP1510_GPIO_PIN_CONTROL	0x18
+
+/* GPIO register bitmasks */
+#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
+#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
+#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
+#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
+#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
+
+/* IRQ handler register bitmasks */
+#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
+#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
+
+/* Driver buffer byte offsets */
+#define BUF_MASK			(FIQ_MASK * 4)
+#define BUF_STATE			(FIQ_STATE * 4)
+#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
+#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
+#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
+#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
+#define BUF_KEY				(FIQ_KEY * 4)
+#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
+#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
+#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
+#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
+#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
+#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
+#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
+#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
+#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
+#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
+#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
+#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
+#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
+#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
+#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
+#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
+#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
+#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
+#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
+#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
+#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
+#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
+#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
+#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
+
+
+/*
+ * Register useage
+ * r8  - temporary
+ * r9  - the driver buffer
+ * r10 - temporary
+ * r11 - interrupts mask
+ * r12 - base pointers
+ * r13 - interrupts status
+ */
+
+	.text
+
+	.global qwerty_fiqin_end
+
+ENTRY(qwerty_fiqin_start)
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+	@ FIQ intrrupt handler
+	ldr r12, omap_ih1_base			@ set pointer to level1 handler
+
+	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
+
+	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ none - spurious FIQ? exit
+
+	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
+
+	mov r8, #2				@ reset FIQ agreement
+	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
+
+	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
+	beq gpio				@ yes - process it
+
+	mov r8, #1
+	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
+	str r8, [r12, #IRQ_MIR_REG_OFFSET]
+exit:
+	subs	pc, lr, #4			@ return from FIQ
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+gpio:	@ GPIO bank interrupt handler
+	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
+
+	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
+restart:
+	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ no - spurious interrupt? exit
+
+	orr r11, r11, r13			@ mask all requested interrupts
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
+	beq hksw				@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@
+	@ Keyboard clock FIQ mode interrupt handler
+	@ r10 now contains KEYBRD_CLK_MASK, use it
+	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
+	bic r11, r11, r10				@ unmask it
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	@ Process keyboard data
+	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
+
+	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
+	cmp r10, #0				@ are we expecting start bit?
+	bne data				@ no - go to data processing
+
+	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
+	beq hksw				@ no - try next source
+
+	@ r8 contains KEYBRD_DATA_MASK, use it
+	str r8, [r9, #BUF_STATE]		@ enter data processing state
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_KEY]			@ clear keycode
+	mov r10, #2				@ reset input bit mask
+	str r10, [r9, #BUF_MASK]
+
+	@ Mask other GPIO line interrupts till key done
+	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
+	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
+
+	b restart				@ restart
+
+data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+
+	@ r8 still contains GPIO input bits
+	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
+	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
+	orreq r8, r8, r10			@ set 1 at current mask position
+	streq r8, [r9, #BUF_KEY]		@ and save back
+
+	mov r10, r10, lsl #1			@ shift mask left
+	bics r10, r10, #0x800			@ have we got all the bits?
+	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
+	bne restart				@ and restart
+
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_STATE]		@ reset state to start
+
+	@ Key done - restore interrupt mask
+	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
+	and r11, r11, r10			@ unmask all saved as unmasked
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
+
+	@ Try appending the keycode to the circular buffer
+	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
+	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
+	cmp r10, r8				@ is buffer full?
+	beq hksw				@ yes - key lost, next source
+
+	add r10, r10, #1			@ incremet keystrokes counter
+	str r10, [r9, #BUF_KEYS_CNT]
+
+	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
+	@ r8 already contains buffer size
+	cmp r10, r8				@ end of buffer?
+	moveq r10, #0				@ yes - rewind to buffer start
+
+	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
+	add r12, r12, r10, LSL #2		@ calculate buffer tail address
+	ldr r8, [r9, #BUF_KEY]			@ get last keycode
+	str r8, [r12]				@ append it to the buffer tail
+
+	add r10, r10, #1			@ increment buffer tail offset
+	str r10, [r9, #BUF_TAIL_OFFSET]
+
+	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_KEY]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+hksw:	@Is hook switch interrupt requested?
+	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
+	beq mdm					@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Hook switch interrupt FIQ mode simple handler
+
+	@ Don't toggle active edge, the switch always bounces
+
+	@ Increment hook switch interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_HSW]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_HSW]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+mdm:	@Is it a modem interrupt?
+	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
+	beq irq					@ no - check for next interrupt
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Modem FIQ mode interrupt handler stub
+
+	@ Increment modem interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_MDM]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_MDM]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+irq:	@ Place deferred_fiq interrupt request
+	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
+	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
+	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
+
+	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
+	b restart				@ check for next GPIO interrupt
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+/*
+ * Virtual addresses for IO
+ */
+omap_ih1_base:
+	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+deferred_fiq_ih_base:
+	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
+omap1510_gpio_base:
+	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
+qwerty_fiqin_end:
+
+/*
+ * Check the size of the FIQ,
+ * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
+ */
+.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
+	.err
+.endif
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
new file mode 100644
index 0000000..6c994e2
--- /dev/null
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -0,0 +1,155 @@
+/*
+ *  Amstrad E3 FIQ handling
+ *
+ *  Copyright (C) 2009 Janusz Krzysztofik
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2004 Amstrad Plc
+ *  Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
+ * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <plat/board-ams-delta.h>
+
+#include <asm/fiq.h>
+#include <mach/ams-delta-fiq.h>
+
+static struct fiq_handler fh = {
+	.name	= "ams-delta-fiq"
+};
+
+/*
+ * This buffer is shared between FIQ and IRQ contexts.
+ * The FIQ and IRQ isrs can both read and write it.
+ * It is structured as a header section several 32bit slots,
+ * followed by the circular buffer where the FIQ isr stores
+ * keystrokes received from the qwerty keyboard.
+ * See ams-delta-fiq.h for details of offsets.
+ */
+unsigned int fiq_buffer[1024];
+EXPORT_SYMBOL(fiq_buffer);
+
+static unsigned int irq_counter[16];
+
+static irqreturn_t deferred_fiq(int irq, void *dev_id)
+{
+	struct irq_desc *irq_desc;
+	struct irq_chip *irq_chip = NULL;
+	int gpio, irq_num, fiq_count;
+
+	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	if (irq_desc)
+		irq_chip = irq_desc->chip;
+
+	/*
+	 * For each handled GPIO interrupt, keep calling its interrupt handler
+	 * until the IRQ counter catches the FIQ incremented interrupt counter.
+	 */
+	for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
+			gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
+		irq_num = gpio_to_irq(gpio);
+		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
+
+		while (irq_counter[gpio] < fiq_count) {
+			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+				/*
+				 * It looks like handle_edge_irq() that
+				 * OMAP GPIO edge interrupts default to,
+				 * expects interrupt already unmasked.
+				 */
+				if (irq_chip && irq_chip->unmask)
+					irq_chip->unmask(irq_num);
+			}
+			generic_handle_irq(irq_num);
+
+			irq_counter[gpio]++;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+void __init ams_delta_init_fiq(void)
+{
+	void *fiqhandler_start;
+	unsigned int fiqhandler_length;
+	struct pt_regs FIQ_regs;
+	unsigned long val, offset;
+	int i, retval;
+
+	fiqhandler_start = &qwerty_fiqin_start;
+	fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
+	pr_info("Installing fiq handler from %p, length 0x%x\n",
+			fiqhandler_start, fiqhandler_length);
+
+	retval = claim_fiq(&fh);
+	if (retval) {
+		pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
+				retval);
+		return;
+	}
+
+	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+	if (retval < 0) {
+		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
+		release_fiq(&fh);
+		return;
+	}
+	/*
+	 * Since no set_type() method is provided by OMAP irq chip,
+	 * switch to edge triggered interrupt type manually.
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
+	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
+
+	set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+	/*
+	 * Initialise the buffer which is shared
+	 * between FIQ mode and IRQ mode
+	 */
+	fiq_buffer[FIQ_GPIO_INT_MASK]	= 0;
+	fiq_buffer[FIQ_MASK]		= 0;
+	fiq_buffer[FIQ_STATE]		= 0;
+	fiq_buffer[FIQ_KEY]		= 0;
+	fiq_buffer[FIQ_KEYS_CNT]	= 0;
+	fiq_buffer[FIQ_KEYS_HICNT]	= 0;
+	fiq_buffer[FIQ_TAIL_OFFSET]	= 0;
+	fiq_buffer[FIQ_HEAD_OFFSET]	= 0;
+	fiq_buffer[FIQ_BUF_LEN]		= 256;
+	fiq_buffer[FIQ_MISSED_KEYS]	= 0;
+	fiq_buffer[FIQ_BUFFER_START]	=
+			(unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
+
+	for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
+		fiq_buffer[i] = 0;
+
+	/*
+	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
+	 * only means of communication with the IRQ level and other kernel
+	 * context code.
+	 */
+	FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
+	set_fiq_regs(&FIQ_regs);
+
+	pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
+
+	/*
+	 * Redirect GPIO interrupts to FIQ
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
+	omap_writel(val, OMAP_IH1_BASE + offset);
+}
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 7fc11c3..fdd1dd5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -33,6 +33,8 @@
 #include <plat/board.h>
 #include <plat/common.h>
 
+#include <mach/ams-delta-fiq.h>
+
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
 
@@ -236,6 +238,10 @@ static void __init ams_delta_init(void)
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
+#ifdef CONFIG_AMS_DELTA_FIQ
+	ams_delta_init_fiq();
+#endif
+
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
@@ -263,8 +269,18 @@ static struct platform_device ams_delta_modem_device = {
 
 static int __init ams_delta_modem_init(void)
 {
+	int err;
+
 	omap_cfg_reg(M14_1510_GPIO2);
-	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+	ams_delta_modem_ports[0].irq =
+			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
+	if (err) {
+		pr_err("Couldn't request gpio pin for modem\n");
+		return err;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
 
 	ams_delta_latch2_write(
 		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 7e70c3c..096f2ed 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -18,18 +18,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
@@ -150,9 +151,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -164,7 +165,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fa7cece..d1100e4 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
@@ -35,7 +36,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
@@ -45,6 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h2.h"
 
@@ -121,9 +122,9 @@ static struct mtd_partition h2_nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h2_nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h2_nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= h2_nor_partitions,
 	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
 };
@@ -134,7 +135,7 @@ static struct resource h2_nor_resource = {
 };
 
 static struct platform_device h2_nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h2_nor_data,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 6a7f9c3..a53ab82 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
@@ -47,6 +47,7 @@
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h3.h"
 
@@ -126,9 +127,9 @@ static struct mtd_partition nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -139,7 +140,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index e36639f..8e313b4 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2133b00..5d12fd3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -22,16 +22,17 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <mach/gpio.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition innovator_partitions[] = {
 	}
 };
 
-static struct flash_platform_data innovator_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data innovator_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= innovator_partitions,
 	.nr_parts	= ARRAY_SIZE(innovator_partitions),
 };
@@ -108,7 +109,7 @@ static struct resource innovator_flash_resource = {
 };
 
 static struct platform_device innovator_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &innovator_flash_data,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ccea4f4..80d8620 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -37,6 +37,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <linux/i2c/tps65010.h>
 
@@ -46,8 +47,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
+#include <plat/flash.h>
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition osk_partitions[] = {
 	}
 };
 
-static struct flash_platform_data osk_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data osk_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= osk_partitions,
 	.nr_parts	= ARRAY_SIZE(osk_partitions),
 };
@@ -107,7 +108,7 @@ static struct resource osk_flash_resource = {
 };
 
 static struct platform_device osk5912_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &osk_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 9fe8872..569b4c9 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
@@ -31,9 +32,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/tc.h>
@@ -126,9 +127,9 @@ static struct mtd_partition palmte_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmte_rom_data = {
-	.map_name	= "map_rom",
+static struct physmap_flash_data palmte_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmte_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
 };
@@ -140,7 +141,7 @@ static struct resource palmte_rom_resource = {
 };
 
 static struct platform_device palmte_rom_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &palmte_rom_data,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index af068e3..6ad49a2 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -21,16 +21,17 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/led.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -104,9 +105,9 @@ static struct mtd_partition palmtt_partitions[] = {
 	}
 };
 
-static struct flash_platform_data palmtt_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data palmtt_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmtt_partitions,
 	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
 };
@@ -118,7 +119,7 @@ static struct resource palmtt_flash_resource = {
 };
 
 static struct platform_device palmtt_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &palmtt_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c7a3b6f..6641de9 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -25,14 +25,15 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -126,10 +127,9 @@ static struct mtd_partition palmz71_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmz71_rom_data = {
-	.map_name	= "map_rom",
-	.name		= "onboardrom",
+static struct physmap_flash_data palmz71_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmz71_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
 };
@@ -141,7 +141,7 @@ static struct resource palmz71_rom_resource = {
 };
 
 static struct platform_device palmz71_rom_device = {
-	.name	= "omapflash",
+	.name	= "physmap-flash",
 	.id	= -1,
 	.dev = {
 		.platform_data = &palmz71_rom_data,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1387a4f..e854d57 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -18,19 +18,20 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
+#include <plat/flash.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
 #include <plat/board.h>
@@ -117,9 +118,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -131,7 +132,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7a97fac..2fb1e5f 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -22,6 +22,7 @@
 #include <linux/notifier.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 #include <linux/errno.h>
@@ -29,10 +30,10 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
@@ -287,9 +288,9 @@ static struct mtd_partition sx1_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sx1_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sx1_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= sx1_partitions,
 	.nr_parts	= ARRAY_SIZE(sx1_partitions),
 };
@@ -310,7 +311,7 @@ static struct resource sx1_old_flash_resource[] = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,
@@ -327,7 +328,7 @@ static struct resource sx1_new_flash_resource = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 1691835..87b9436 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/mtd/physmap.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
@@ -27,11 +28,11 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/common.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
@@ -86,9 +87,9 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
-static struct flash_platform_data voiceblue_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data voiceblue_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 };
 
 static struct resource voiceblue_flash_resource = {
@@ -98,7 +99,7 @@ static struct resource voiceblue_flash_resource = {
 };
 
 static struct platform_device voiceblue_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &voiceblue_flash_data,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 04f1d29..6bbb1b8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified to use omap shared clock framework by
@@ -38,26 +38,6 @@ struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
  * Omap1 specific clock functions
  *-------------------------------------------------------------------------*/
 
-static int clk_omap1_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_omap1_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clkops_dummy = {
-	.enable		= clk_omap1_dummy_enable,
-	.disable	= clk_omap1_dummy_disable,
-};
-
-/* XXX can be replaced with a fixed_divisor_recalc */
-unsigned long omap1_watchdog_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 14;
-}
-
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
@@ -577,9 +557,6 @@ const struct clkops clkops_uart = {
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
-
 	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
@@ -601,7 +578,7 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-void __init omap1_clk_disable_unused(struct clk *clk)
+void omap1_clk_disable_unused(struct clk *clk)
 {
 	__u32 regval32;
 
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index a4190af..75d0d7d 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -39,7 +39,7 @@ extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
 extern unsigned long omap1_watchdog_recalc(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void __init omap1_clk_disable_unused(struct clk *clk);
+extern void omap1_clk_disable_unused(struct clk *clk);
 #else
 #define omap1_clk_disable_unused	NULL
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 65e7b5b..aa8558a 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock_data.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -27,13 +27,6 @@
  * Omap1 clocks
  *-------------------------------------------------------------------------*/
 
-/* XXX is this necessary? */
-static struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_dummy,
-	.flags	= RATE_FIXED,
-};
-
 static struct clk ck_ref = {
 	.name		= "ck_ref",
 	.ops		= &clkops_null,
@@ -149,7 +142,8 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
+		.fixed_div	= 14,
+		.recalc		= &omap_fixed_divisor_recalc,
 	},
 	.idlect_shift	= 0,
 };
@@ -388,8 +382,7 @@ static struct uart_clk uart1_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 29,
 	},
@@ -429,8 +422,7 @@ static struct uart_clk uart3_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 31,
 	},
@@ -442,7 +434,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
@@ -452,7 +444,7 @@ static struct clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
@@ -463,7 +455,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
 	.enable_bit	= 8 /* UHOST_EN */,
 };
@@ -473,7 +465,6 @@ static struct clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 4,
 };
@@ -483,7 +474,6 @@ static struct clk usb_dc_ck7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 8,
 };
@@ -493,7 +483,6 @@ static struct clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 6,
 };
@@ -514,7 +503,6 @@ static struct clk bclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk bclk_16xx = {
@@ -529,36 +517,34 @@ static struct clk bclk_16xx = {
 };
 
 static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
+	.name		= "mmc1_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 23,
 };
 
 static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
+	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
 
 static struct clk mmc3_ck = {
-	.name		= "mmc_ck",
-	.id		= 2,
+	.name		= "mmc3_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 12,
 };
@@ -576,7 +562,6 @@ static struct clk virtual_ck_mpu = {
 remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
@@ -585,7 +570,6 @@ static struct clk i2c_fck = {
 
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index a2d07aa..379100c 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -73,7 +73,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
 
 static struct resource mbox_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
new file mode 100644
index 0000000..0b07a78
--- /dev/null
+++ b/arch/arm/mach-omap1/flash.c
@@ -0,0 +1,33 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#include <plat/io.h>
+#include <plat/tc.h>
+
+void omap1_set_vpp(struct map_info *map, int enable)
+{
+	static int count;
+	u32 l;
+
+	if (enable) {
+		if (count++ == 0) {
+			l = omap_readl(EMIFS_CONFIG);
+			l |= OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	} else {
+		if (count && (--count == 0)) {
+			l = omap_readl(EMIFS_CONFIG);
+			l &= ~OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	}
+}
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 1bf4735..5446c99 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -23,9 +23,7 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -34,6 +32,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		omap_cfg_reg(I2C_SDA);
 		omap_cfg_reg(I2C_SCL);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
new file mode 100644
index 0000000..7a2df29
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-omap1/include/ams-delta-fiq.h
+ *
+ * Taken from the original Amstrad modifications to fiq.h
+ *
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AMS_DELTA_FIQ_H
+#define __AMS_DELTA_FIQ_H
+
+#include <plat/irqs.h>
+
+/*
+ * Interrupt number used for passing control from FIQ to IRQ.
+ * IRQ12, described as reserved, has been selected.
+ */
+#define INT_DEFERRED_FIQ	INT_1510_RES12
+/*
+ * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
+ */
+#if (INT_DEFERRED_FIQ < IH2_BASE)
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH1_BASE
+#else
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH2_BASE
+#endif
+
+/*
+ * These are the offsets from the begining of the fiq_buffer. They are put here
+ * since the buffer and header need to be accessed by drivers servicing devices
+ * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
+ */
+#define FIQ_MASK		 0
+#define FIQ_STATE		 1
+#define FIQ_KEYS_CNT		 2
+#define FIQ_TAIL_OFFSET		 3
+#define FIQ_HEAD_OFFSET		 4
+#define FIQ_BUF_LEN		 5
+#define FIQ_KEY			 6
+#define FIQ_MISSED_KEYS		 7
+#define FIQ_BUFFER_START	 8
+#define FIQ_GPIO_INT_MASK	 9
+#define FIQ_KEYS_HICNT		10
+#define FIQ_IRQ_PEND		11
+#define FIQ_SIR_CODE_L1		12
+#define IRQ_SIR_CODE_L2		13
+
+#define FIQ_CNT_INT_00		14
+#define FIQ_CNT_INT_KEY		15
+#define FIQ_CNT_INT_MDM		16
+#define FIQ_CNT_INT_03		17
+#define FIQ_CNT_INT_HSW		18
+#define FIQ_CNT_INT_05		19
+#define FIQ_CNT_INT_06		20
+#define FIQ_CNT_INT_07		21
+#define FIQ_CNT_INT_08		22
+#define FIQ_CNT_INT_09		23
+#define FIQ_CNT_INT_10		24
+#define FIQ_CNT_INT_11		25
+#define FIQ_CNT_INT_12		26
+#define FIQ_CNT_INT_13		27
+#define FIQ_CNT_INT_14		28
+#define FIQ_CNT_INT_15		29
+
+#define FIQ_CIRC_BUFF		30      /*Start of circular buffer */
+
+#ifndef __ASSEMBLER__
+extern unsigned int fiq_buffer[];
+extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
+
+extern void __init ams_delta_init_fiq(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746..e8a8cf3 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,18 +11,71 @@
  *
 */
 
-		.macro	addruart,rx
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+
+#include <plat/serial.h>
+
+		.pushsection .data
+omap_uart_phys:	.word	0x0
+omap_uart_virt:	.word	0x0
+		.popsection
+
+		/*
+		 * Note that this code won't work if the bootloader passes
+		 * a wrong machine ID number in r1. To debug, just hardcode
+		 * the desired UART phys and virt addresses temporarily into
+		 * the omap_uart_phys and omap_uart_virt above.
+		 */
+		.macro	addruart, rx, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+9:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldrne	\rx, =omap_uart_virt	@ virtual base
+		ldr	\rx, [\rx, #0]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
+		/* Check the debug UART configuration set in uncompress.h */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
+		ldreq	\rx, =OMAP_UART_INFO
+		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
+		ldr	\rx, [\rx, #0]
+
+		/* Select the UART to use based on the UART1 scratchpad value */
+10:		cmp	\rx, #0			@ no port configured?
+		beq	11f			@ if none, try to use UART1
+		cmp	\rx, #OMAP1UART1
+		beq	11f			@ configure OMAP1UART1
+		cmp	\rx, #OMAP1UART2
+		beq	12f			@ configure OMAP1UART2
+		cmp	\rx, #OMAP1UART3
+		beq	13f			@ configure OMAP2UART3
+
+		/* Configure the UART offset from the phys/virt base */
+11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		b	98f
+12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		b	98f
+13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+
+		/* Store both phys and virt address for the uart */
+98:		add	\rx, \rx, #0xff000000	@ phys base
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		sub	\rx, \rx, #0xff000000	@ phys base
+		add	\rx, \rx, #0xfe000000	@ virt base
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		b	9b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
@@ -30,13 +83,13 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
 1002:
 		.endm
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index caf889a..4f5b3da 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -146,7 +146,6 @@ EXPORT_SYMBOL(mbox_dsp_info);
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret = 0;
 
 	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "invalid number of resources: %d\n",
@@ -160,12 +159,18 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = res->start;
+
+	mbox_base = ioremap(res->start, resource_size(res));
+	if (!mbox_base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENODEV;
+	}
 
 	/* DSP IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		iounmap(mbox_base);
 		return -ENODEV;
 	}
 	mbox_dsp_info.irq = res->start;
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 6bddce1..e9bdff1 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
@@ -99,9 +100,11 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
+#define OMAP7XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap7xx_mcbsp_pdata		NULL
 #define OMAP7XX_MCBSP_PDATA_SZ		0
+#define OMAP7XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -132,9 +135,11 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#define OMAP15XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap15xx_mcbsp_pdata		NULL
 #define OMAP15XX_MCBSP_PDATA_SZ		0
+#define OMAP15XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -165,19 +170,25 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#define OMAP16XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap16xx_mcbsp_pdata		NULL
 #define OMAP16XX_MCBSP_PDATA_SZ		0
+#define OMAP16XX_MCBSP_REG_NUM		0
 #endif
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap7xx())
+	if (cpu_is_omap7xx()) {
 		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap15xx())
+		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap15xx()) {
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap16xx())
+		omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap16xx()) {
 		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+		omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
+	}
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6e5207c..349de90 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase	= OMAP_UART1_BASE,
+		.mapbase	= OMAP1_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -72,7 +72,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART2_BASE,
+		.mapbase	= OMAP1_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -80,7 +80,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART3_BASE,
+		.mapbase	= OMAP1_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 9ad1185..20cfbcc 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -68,12 +68,6 @@ struct sys_timer omap_timer;
  * ---------------------------------------------------------------------------
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#else
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
 /* 16xx specific defines */
 #define OMAP1_32K_TIMER_BASE		0xfffb9000
 #define OMAP1_32K_TIMER_CR		0x08
@@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = {
 	.set_mode	= omap_32k_timer_set_mode,
 };
 
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_32k_timer;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 606bf04..b31b6f1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,28 +1,20 @@
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP24XX
-	bool "OMAP24xx Based System"
-	depends on ARCH_OMAP2
-
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
-	depends on ARCH_OMAP24XX
-
-config ARCH_OMAP34XX
-	bool "OMAP34xx Based System"
-	depends on ARCH_OMAP3
-	select USB_ARCH_HAS_EHCI
+	depends on ARCH_OMAP2
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select ARCH_OMAP_OTG
 
 config OMAP_PACKAGE_CBC
@@ -38,11 +30,11 @@ config OMAP_PACKAGE_CBP
        bool
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
+	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -51,55 +43,61 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
+config MACH_DEVKIT8000
+	bool "DEVKIT8000 board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -120,33 +118,39 @@ config MACH_NOKIA_N8X0
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_IGEP0020
-	bool "IGEP0020"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	bool "IGEP v2 board"
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
+config MACH_SBC3530
+	bool "OMAP3 SBC STALKER board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
@@ -162,7 +166,7 @@ config OMAP3_EMU
 
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	default n
 	help
 	  If you know that none of your system initiators will attempt to
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b32678b..ea52b03 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,27 +5,36 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
-omap-3-4-common				= dpll.o
+omap-2-3-common				= irq.o sdrc.o
+hwmod-common				= omap_hwmod.o \
+					  omap_hwmod_common_data.o
 prcm-common				= prcm.o powerdomain.o
-clock-common				= clock.o clock_common_data.o clockdomain.o
+clock-common				= clock.o clock_common_data.o \
+					  clockdomain.o clkt_dpll.o \
+					  clkt_clksel.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
-			    $(omap-3-4-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
+
+AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+AFLAGS_sram242x.o			:=-Wa,-march=armv6
+AFLAGS_sram243x.o			:=-Wa,-march=armv6
+AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
+
 # Pin multiplexing
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 
@@ -36,9 +45,13 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+
+AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+
 endif
 
 # PRCM
@@ -47,22 +60,36 @@ obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
+					   clkt2xxx_sys.o \
+					   clkt2xxx_dpllcore.o \
+					   clkt2xxx_virt_prcm_set.o \
+					   clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
+					   clock34xx.o clkt34xx_dpll3m2.o \
+					   clock3517.o clock36xx.o \
+					   dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
+					   dpll3xxx.o
+
+# OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clock34xx_data.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx.o clock44xx_data.o
+
+# hwmod data
+obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 
 # EMU peripherals
-obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
-iommu-y					+= iommu2.o
-iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
-
-obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o
 
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
@@ -71,46 +98,53 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
-					   mmc-twl4030.o
+					   hsmmc.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
+                                           hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
-					   mmc-twl4030.o
+					   hsmmc.o \
+					   board-sdp-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
-					   mmc-twl4030.o
+					   board-rx51-video.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o \
+					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o \
+					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
-					   mmc-twl4030.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
+					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
+					   hsmmc.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
+obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
+					   hsmmc.o
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
@@ -119,5 +153,8 @@ obj-y					+= usb-ehci.o
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
 
+nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
+obj-y					+= $(nand-m) $(nand-y)
+
 smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
 obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index e508904..a11a575 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 #include <linux/err.h>
@@ -28,7 +29,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
 #include <plat/mux.h>
@@ -38,7 +38,7 @@
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define SDP2430_CS0_BASE	0x04000000
 #define SECONDARY_LCD_GPIO		147
@@ -74,8 +74,7 @@ static struct mtd_partition sdp2430_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sdp2430_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sdp2430_flash_data = {
 	.width		= 2,
 	.parts		= sdp2430_partitions,
 	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
@@ -88,7 +87,7 @@ static struct resource sdp2430_flash_resource = {
 };
 
 static struct platform_device sdp2430_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev = {
 		.platform_data	= &sdp2430_flash_data,
@@ -175,15 +174,24 @@ static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2D),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP_GPIO_IRQ(78),
+	},
+};
+
 static int __init omap2430_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
 	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c_boardinfo));
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -194,6 +202,21 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+	.otg		= 1,
+#ifdef  CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 0x0,
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	.hmc_mode	= 0x1,
+#endif
+	.pins[0]	= 3,
+};
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
@@ -202,8 +225,9 @@ static void __init omap_2430sdp_init(void)
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
-	usb_musb_init();
+	omap2_hsmmc_init(mmc);
+	omap_usb_init(&sdp2430_usb_config);
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
@@ -215,7 +239,7 @@ static void __init omap_2430sdp_init(void)
 static void __init omap_2430sdp_map_io(void)
 {
 	omap2_set_globals_243x();
-	omap2_map_common_io();
+	omap243x_map_common_io();
 }
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index c90b0d0..f474a80 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,9 +41,12 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <mach/board-sdp.h>
+
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "pm.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -55,6 +58,24 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
+/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
+static struct cpuidle_params omap3_cpuidle_params_table[] = {
+	/* C1 */
+	{1, 2, 2, 5},
+	/* C2 */
+	{1, 10, 10, 30},
+	/* C3 */
+	{1, 50, 50, 300},
+	/* C4 */
+	{1, 1500, 1800, 4000},
+	/* C5 */
+	{1, 2500, 7500, 12000},
+	/* C6 */
+	{1, 3000, 8500, 15000},
+	/* C7 */
+	{1, 10000, 30000, 300000},
+};
+
 static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -116,9 +137,7 @@ static void ads7846_dev_init(void)
 	}
 
 	gpio_direction_input(ts_gpio);
-
-	omap_set_gpio_debounce(ts_gpio, 1);
-	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+	gpio_set_debounce(ts_gpio, 310);
 }
 
 static int ads7846_get_pendown_state(void)
@@ -129,6 +148,7 @@ static int ads7846_get_pendown_state(void)
 static struct ads7846_platform_data tsc2046_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
+	.wakeup				= true,
 };
 
 
@@ -305,6 +325,7 @@ static void __init omap_3430sdp_init_irq(void)
 {
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -326,7 +347,7 @@ static struct twl4030_bci_platform_data sdp3430_bci_data = {
 	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		/* 8 bits (default) requires S6.3 == ON,
@@ -363,7 +384,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	 */
 	mmc[0].gpio_cd = gpio + 0;
 	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
@@ -520,10 +541,6 @@ static struct regulator_init_data sdp3430_vdac = {
 /* VPLL2 for digital video outputs */
 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 	{
-		.supply		= "vdvi",
-		.dev		= &sdp3430_lcd_device.dev,
-	},
-	{
 		.supply		= "vdds_dsi",
 		.dev		= &sdp3430_dss_device.dev,
 	}
@@ -630,7 +647,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -650,6 +667,120 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+	{
+		.parts = sdp_nor_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+	},
+	{
+		.parts = sdp_onenand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+	},
+	{
+		.parts = sdp_nand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+	},
+};
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -664,8 +795,9 @@ static void __init omap_3430sdp_init(void)
 				ARRAY_SIZE(sdp3430_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
+	sdp_flash_init(sdp_flash_partitions);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
@@ -674,7 +806,7 @@ static void __init omap_3430sdp_init(void)
 static void __init omap_3430sdp_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 7390596..504d2bd 100755..100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,7 +54,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -68,8 +68,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 static void __init omap_sdp_map_io(void)
 {
-	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap2_set_globals_36xx();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_config_kernel sdp_config[] __initdata = {
@@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
 	enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 0c6be6b..e4a5d66 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -17,8 +17,13 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
+#include <mach/omap4-common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -27,7 +32,78 @@
 #include <plat/common.h>
 #include <plat/control.h>
 #include <plat/timer-gp.h>
-#include <asm/hardware/gic.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+#define ETH_KS8851_IRQ			34
+#define ETH_KS8851_POWER_ON		48
+#define ETH_KS8851_QUART		138
+
+static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
+	{
+		.modalias               = "ks8851",
+		.bus_num                = 1,
+		.chip_select            = 0,
+		.max_speed_hz           = 24000000,
+		.irq                    = ETH_KS8851_IRQ,
+	},
+};
+
+static int omap_ethernet_init(void)
+{
+	int status;
+
+	/* Request of GPIO lines */
+
+	status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
+		return status;
+	}
+
+	status = gpio_request(ETH_KS8851_QUART, "quart");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
+		goto error1;
+	}
+
+	status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
+		goto error2;
+	}
+
+	/* Configuration of requested GPIO lines */
+
+	status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	status = gpio_direction_output(ETH_KS8851_QUART, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
+		goto error3;
+	}
+
+	status = gpio_direction_input(ETH_KS8851_IRQ);
+	if (status) {
+		pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	return 0;
+
+error3:
+	gpio_free(ETH_KS8851_IRQ);
+error2:
+	gpio_free(ETH_KS8851_QUART);
+error1:
+	gpio_free(ETH_KS8851_POWER_ON);
+	return status;
+}
 
 static struct platform_device sdp4430_lcd_device = {
 	.name		= "sdp4430_lcd",
@@ -38,10 +114,6 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
 };
 
-static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
-};
-
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -50,21 +122,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
-static void __init gic_init_irq(void)
-{
-	void __iomem *base;
-
-	/* Static mapping, never released */
-	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!base);
-	gic_dist_init(0, base, 29);
-
-	/* Static mapping, never released */
-	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base_addr);
-	gic_cpu_init(0, gic_cpu_base_addr);
-}
-
 static void __init omap_4430sdp_init_irq(void)
 {
 	omap_board_config = sdp4430_config;
@@ -77,17 +134,266 @@ static void __init omap_4430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.nonremovable   = true,
+	},
+	{}	/* Terminator */
+};
 
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.1",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0)
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data sdp4430_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data sdp4430_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 2,
+	.consumer_supplies      = sdp4430_vmmc_supply,
+};
+
+static struct regulator_init_data sdp4430_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &sdp4430_vmmc,
+	.vpp		= &sdp4430_vpp,
+	.vusim		= &sdp4430_vusim,
+	.vana		= &sdp4430_vana,
+	.vcxio		= &sdp4430_vcxio,
+	.vdac		= &sdp4430_vdac,
+	.vusb		= &sdp4430_vusb,
+	.vaux1		= &sdp4430_vaux1,
+	.vaux2		= &sdp4430_vaux2,
+	.vaux3		= &sdp4430_vaux3,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &sdp4430_twldata,
+	},
+};
+static int __init omap4_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
 static void __init omap_4430sdp_init(void)
 {
+	int status;
+
+	omap4_i2c_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
+	usb_nop_xceiv_register();
+	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+	if (!cpu_is_omap44xx())
+		usb_musb_init(&musb_board_data);
+
+	status = omap_ethernet_init();
+	if (status) {
+		pr_err("Ethernet initialization failed: %d\n", status);
+	} else {
+		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
+		spi_register_board_info(sdp4430_spi_board_info,
+				ARRAY_SIZE(sdp4430_spi_board_info));
+	}
 }
 
 static void __init omap_4430sdp_map_io(void)
 {
 	omap2_set_globals_443x();
-	omap2_map_common_io();
+	omap44xx_map_common_io();
 }
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index b4e6eca..af383a8 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -20,18 +20,341 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>
 
 #include <mach/hardware.h>
+#include <mach/am35xx.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/control.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include "mux.h"
 
+#define AM35XX_EVM_PHY_MASK		(0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+	.phy_mask	= AM35XX_EVM_PHY_MASK,
+	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+	.rmii_en	= 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_emac_device = {
+	.name		= "davinci_emac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
+	.resource	= am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+	unsigned int regval;
+
+	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
+	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
+	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
+	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
+	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
+	pdata->version			= EMAC_VERSION_2;
+	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
+	pdata->interrupt_enable		= am3517_enable_ethernet_int;
+	pdata->interrupt_disable	= am3517_disable_ethernet_int;
+	am3517_emac_device.dev.platform_data	= pdata;
+	platform_device_register(&am3517_emac_device);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	return ;
+}
+
+
+
+#define LCD_PANEL_PWR		176
+#define LCD_PANEL_BKLIGHT_PWR	182
+#define LCD_PANEL_PWM		181
+
+static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("s35390a", 0x30),
+		.type		= "s35390a",
+	},
+};
+
+/*
+ * RTC - S35390A
+ */
+#define GPIO_RTCS35390A_IRQ	55
+
+static void __init am3517_evm_rtc_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
+	r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+	if (r < 0) {
+		printk(KERN_WARNING "failed to request GPIO#%d\n",
+				GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
+	if (r < 0) {
+		printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
+				GPIO_RTCS35390A_IRQ);
+		gpio_free(GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+}
+
+/*
+ * I2C GPIO Expander - TCA6416
+ */
+
+/* Mounted on Base-Board */
+static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+};
+static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_gpio_expander_info_0,
+	},
+};
+
+/* Mounted on UI Card */
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
+};
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
+};
+static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &am3517evm_ui_gpio_expander_info_1,
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_ui_gpio_expander_info_2,
+	},
+};
+
+static int __init am3517_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
+	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
+
+	return 0;
+}
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+static void __init am3517_evm_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
+	/*
+	 * Enable GPIO 182 = LCD Backlight Power
+	 */
+	r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+		return;
+	}
+	gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
+	/*
+	 * Enable GPIO 181 = LCD Panel PWM
+	 */
+	r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_pwm\n");
+		goto err_1;
+	}
+	gpio_direction_output(LCD_PANEL_PWM, 1);
+	/*
+	 * Enable GPIO 176 = LCD Panel Power enable pin
+	 */
+	r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_pwr\n");
+		goto err_2;
+	}
+	gpio_direction_output(LCD_PANEL_PWR, 1);
+
+	printk(KERN_INFO "Display initialized successfully\n");
+	return;
+
+err_2:
+	gpio_free(LCD_PANEL_PWM);
+err_1:
+	gpio_free(LCD_PANEL_BKLIGHT_PWR);
+}
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif
+
+static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(LCD_PANEL_PWR, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_PANEL_PWR, 0);
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "sharp_lq_panel",
+	.phy.dpi.data_lines 	= 16,
+	.platform_enable	= am3517_evm_panel_enable_lcd,
+	.platform_disable	= am3517_evm_panel_disable_lcd,
+};
+
+static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device am3517_evm_tv_device = {
+	.type 			= OMAP_DISPLAY_TYPE_VENC,
+	.name 			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= am3517_evm_panel_enable_tv,
+	.platform_disable	= am3517_evm_panel_disable_tv,
+};
+
+static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= am3517_evm_panel_enable_dvi,
+	.platform_disable	= am3517_evm_panel_disable_dvi,
+};
+
+static struct omap_dss_device *am3517_evm_dss_devices[] = {
+	&am3517_evm_lcd_device,
+	&am3517_evm_tv_device,
+	&am3517_evm_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_evm_dss_data = {
+	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
+	.devices	= am3517_evm_dss_devices,
+	.default_device	= &am3517_evm_lcd_device,
+};
+
+struct platform_device am3517_evm_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &am3517_evm_dss_data,
+	},
+};
+
 /*
  * Board initialization
  */
@@ -39,6 +362,7 @@ static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
 };
 
 static struct platform_device *am3517_evm_devices[] __initdata = {
+	&am3517_evm_dss_device,
 };
 
 static void __init am3517_evm_init_irq(void)
@@ -51,9 +375,14 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
@@ -70,20 +399,72 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	am3517_evm_i2c_init();
 	platform_add_devices(am3517_evm_devices,
 				ARRAY_SIZE(am3517_evm_devices));
 
 	omap_serial_init();
+
+	/* Configure GPIO for EHCI port */
+	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
+	/* DSS */
+	am3517_evm_display_init();
+
+	/* RTC - S35390A */
+	am3517_evm_rtc_init();
+
+	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
+	/*Ethernet*/
+	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
 static void __init am3517_evm_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index fbbd68d..aa69fb9 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,7 +337,7 @@ static void __init omap_apollon_init(void)
 static void __init omap_apollon_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 2626a9f..e679a2c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -32,6 +32,9 @@
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,12 +44,14 @@
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/mcspi.h>
 
 #include <mach/hardware.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define CM_T35_GPIO_PENDOWN	57
 
@@ -248,7 +253,6 @@ static inline void cm_t35_init_nand(void) {}
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 #include <plat/mcspi.h>
@@ -304,6 +308,193 @@ static void __init cm_t35_init_ads7846(void)
 static inline void cm_t35_init_ads7846(void) {}
 #endif
 
+#define CM_T35_LCD_EN_GPIO 157
+#define CM_T35_LCD_BL_GPIO 58
+#define CM_T35_DVI_EN_GPIO 54
+
+static int lcd_bl_gpio;
+static int lcd_en_gpio;
+static int dvi_en_gpio;
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(lcd_en_gpio, 1);
+	gpio_set_value(lcd_bl_gpio, 1);
+
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	lcd_enabled = 0;
+
+	gpio_set_value(lcd_bl_gpio, 0);
+	gpio_set_value(lcd_en_gpio, 0);
+}
+
+static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(dvi_en_gpio, 0);
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dvi_en_gpio, 1);
+	dvi_enabled = 0;
+}
+
+static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device cm_t35_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "toppoly_tdo35s_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.platform_enable	= cm_t35_panel_enable_lcd,
+	.platform_disable	= cm_t35_panel_disable_lcd,
+};
+
+static struct omap_dss_device cm_t35_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= cm_t35_panel_enable_dvi,
+	.platform_disable	= cm_t35_panel_disable_dvi,
+};
+
+static struct omap_dss_device cm_t35_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= cm_t35_panel_enable_tv,
+	.platform_disable	= cm_t35_panel_disable_tv,
+};
+
+static struct omap_dss_device *cm_t35_dss_devices[] = {
+	&cm_t35_lcd_device,
+	&cm_t35_dvi_device,
+	&cm_t35_tv_device,
+};
+
+static struct omap_dss_board_info cm_t35_dss_data = {
+	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
+	.devices	= cm_t35_dss_devices,
+	.default_device	= &cm_t35_dvi_device,
+};
+
+static struct platform_device cm_t35_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_t35_dss_data,
+	},
+};
+
+static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct tdo24m_platform_data tdo24m_config = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz		= 1000000,
+		.controller_data	= &tdo24m_mcspi_config,
+		.platform_data		= &tdo24m_config,
+	},
+};
+
+static void __init cm_t35_init_display(void)
+{
+	int err;
+
+	lcd_en_gpio = CM_T35_LCD_EN_GPIO;
+	lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
+	dvi_en_gpio = CM_T35_DVI_EN_GPIO;
+
+	spi_register_board_info(cm_t35_lcd_spi_board_info,
+				ARRAY_SIZE(cm_t35_lcd_spi_board_info));
+
+	err = gpio_request(lcd_en_gpio, "LCD RST");
+	if (err) {
+		pr_err("CM-T35: failed to get LCD reset GPIO\n");
+		goto out;
+	}
+
+	err = gpio_request(lcd_bl_gpio, "LCD BL");
+	if (err) {
+		pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
+		goto err_lcd_bl;
+	}
+
+	err = gpio_request(dvi_en_gpio, "DVI EN");
+	if (err) {
+		pr_err("CM-T35: failed to get DVI reset GPIO\n");
+		goto err_dvi_en;
+	}
+
+	gpio_export(lcd_en_gpio, 0);
+	gpio_export(lcd_bl_gpio, 0);
+	gpio_export(dvi_en_gpio, 0);
+	gpio_direction_output(lcd_en_gpio, 0);
+	gpio_direction_output(lcd_bl_gpio, 0);
+	gpio_direction_output(dvi_en_gpio, 1);
+
+	msleep(50);
+	gpio_set_value(lcd_en_gpio, 1);
+
+	err = platform_device_register(&cm_t35_dss_device);
+	if (err) {
+		pr_err("CM-T35: failed to register DSS device\n");
+		goto err_dev_reg;
+	}
+
+	return;
+
+err_dev_reg:
+	gpio_free(dvi_en_gpio);
+err_dvi_en:
+	gpio_free(lcd_bl_gpio);
+err_lcd_bl:
+	gpio_free(lcd_en_gpio);
+out:
+
+	return;
+}
+
 static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -312,6 +503,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
 	.supply			= "vmmc_aux",
 };
 
+static struct regulator_consumer_supply cm_t35_vdac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &cm_t35_dss_device.dev,
+};
+
+static struct regulator_consumer_supply cm_t35_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &cm_t35_dss_device.dev,
+};
+
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
 	.constraints = {
@@ -342,6 +543,35 @@ static struct regulator_init_data cm_t35_vsim = {
 	.consumer_supplies	= &cm_t35_vsim_supply,
 };
 
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data cm_t35_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data cm_t35_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vdvi_supply,
+};
+
 static struct twl4030_usb_data cm_t35_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -364,7 +594,7 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -383,7 +613,7 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
@@ -413,7 +643,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	cm_t35_vmmc1_supply.dev = mmc[0].dev;
@@ -445,6 +675,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.gpio		= &cm_t35_gpio_data,
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
+	.vdac		= &cm_t35_vdac,
+	.vpll2		= &cm_t35_vpll2,
 };
 
 static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
@@ -479,7 +711,7 @@ static void __init cm_t35_init_irq(void)
 static void __init cm_t35_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
@@ -568,6 +800,11 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 
+	/* display controls */
+	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
 	/* TPS IRQ */
 	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
 		  OMAP_PIN_INPUT_PULLUP),
@@ -575,6 +812,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init cm_t35_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -584,8 +827,9 @@ static void __init cm_t35_init(void)
 	cm_t35_init_ads7846();
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
+	cm_t35_init_display();
 
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
new file mode 100644
index 0000000..77022b5
--- /dev/null
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -0,0 +1,831 @@
+/*
+ * board-devkit8000.c - TimLL Devkit8000
+ *
+ * Copyright (C) 2009 Kim Botherway
+ * Copyright (C) 2010 Thomas Weber
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/dm9000.h>
+#include <linux/interrupt.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+#include "mux.h"
+#include "hsmmc.h"
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+#define OMAP_DM9000_GPIO_IRQ	25
+#define OMAP3_DEVKIT_TS_GPIO	27
+
+static struct mtd_partition devkit8000_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data devkit8000_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= devkit8000_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(devkit8000_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+};
+
+static struct resource devkit8000_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device devkit8000_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &devkit8000_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &devkit8000_nand_resource,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= 29,
+	},
+	{}	/* Terminator */
+};
+static struct omap_board_config_kernel devkit8000_config[] __initdata = {
+};
+
+static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
+	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+
+	return 0;
+}
+
+static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+}
+static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+}
+
+static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+
+	return 0;
+}
+
+static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply devkit8000_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+
+static struct omap_dss_device devkit8000_lcd_device = {
+	.name                   = "lcd",
+	.driver_name            = "innolux_at_panel",
+	.type                   = OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines     = 24,
+	.platform_enable        = devkit8000_panel_enable_lcd,
+	.platform_disable       = devkit8000_panel_disable_lcd,
+};
+static struct omap_dss_device devkit8000_dvi_device = {
+	.name                   = "dvi",
+	.driver_name            = "generic_panel",
+	.type                   = OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines     = 24,
+	.platform_enable        = devkit8000_panel_enable_dvi,
+	.platform_disable       = devkit8000_panel_disable_dvi,
+};
+
+static struct omap_dss_device devkit8000_tv_device = {
+	.name                   = "tv",
+	.driver_name            = "venc",
+	.type                   = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable        = devkit8000_panel_enable_tv,
+	.platform_disable       = devkit8000_panel_disable_tv,
+};
+
+
+static struct omap_dss_device *devkit8000_dss_devices[] = {
+	&devkit8000_lcd_device,
+	&devkit8000_dvi_device,
+	&devkit8000_tv_device,
+};
+
+static struct omap_dss_board_info devkit8000_dss_data = {
+	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
+	.devices = devkit8000_dss_devices,
+	.default_device = &devkit8000_lcd_device,
+};
+
+static struct platform_device devkit8000_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &devkit8000_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
+	.supply = "vdda_dac",
+	.dev	= &devkit8000_dss_device.dev,
+};
+
+static int board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data devkit8000_kp_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 6,
+	.cols		= 6,
+	.rep		= 1,
+};
+
+static struct gpio_led gpio_leds[];
+
+static int devkit8000_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	omap2_hsmmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	devkit8000_vmmc1_supply.dev = mmc[0].dev;
+	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= devkit8000_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
+	{
+	.supply		= "vdvi",
+	.dev		= &devkit8000_lcd_device.dev,
+	},
+	{
+	.supply		= "vdds_dsi",
+	.dev		= &devkit8000_dss_device.dev,
+	}
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data devkit8000_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data devkit8000_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data devkit8000_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
+	.consumer_supplies	= devkit8000_vpll2_supplies,
+};
+
+static struct twl4030_usb_data devkit8000_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data devkit8000_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data devkit8000_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &devkit8000_audio_data,
+};
+
+static struct twl4030_platform_data devkit8000_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &devkit8000_usb_data,
+	.gpio		= &devkit8000_gpio_data,
+	.codec		= &devkit8000_codec_data,
+	.vmmc1		= &devkit8000_vmmc1,
+	.vsim		= &devkit8000_vsim,
+	.vdac		= &devkit8000_vdac,
+	.vpll2		= &devkit8000_vpll2,
+	.keypad		= &devkit8000_kp_data,
+};
+
+static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &devkit8000_twldata,
+	},
+};
+
+static int __init devkit8000_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
+			ARRAY_SIZE(devkit8000_i2c_boardinfo));
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 186,
+		.active_low		= true,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.gpio			= 163,
+		.active_low		= true,
+	},
+	{
+		.name			= "ledB",
+		.default_trigger	= "none",
+		.gpio			= 153,
+		.active_low             = true,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "none",
+		.gpio			= 164,
+		.active_low             = true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 26,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+
+static void __init devkit8000_init_irq(void)
+{
+	omap_board_config = devkit8000_config;
+	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static void __init devkit8000_ads7846_init(void)
+{
+	int gpio = OMAP3_DEVKIT_TS_GPIO;
+	int ret;
+
+	ret = gpio_request(gpio, "ads7846_pen_down");
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to request GPIO %d for "
+				"ads7846 pen down IRQ\n", gpio);
+		return;
+	}
+
+	gpio_direction_input(gpio);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max                  = 0x0fff,
+	.y_max                  = 0x0fff,
+	.x_plate_ohms           = 180,
+	.pressure_max           = 255,
+	.debounce_max           = 10,
+	.debounce_tol           = 5,
+	.debounce_rep           = 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs     = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 2,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+#define OMAP_DM9000_BASE	0x2c000000
+
+static struct resource omap_dm9000_resources[] = {
+	[0] = {
+		.start		= OMAP_DM9000_BASE,
+		.end		= (OMAP_DM9000_BASE + 0x4 - 1),
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= (OMAP_DM9000_BASE + 0x400),
+		.end		= (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start		= OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
+		.flags		= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct dm9000_plat_data omap_dm9000_platdata = {
+	.flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device omap_dm9000_dev = {
+	.name = "dm9000",
+	.id = -1,
+	.num_resources	= ARRAY_SIZE(omap_dm9000_resources),
+	.resource	= omap_dm9000_resources,
+	.dev = {
+		.platform_data = &omap_dm9000_platdata,
+	},
+};
+
+static void __init omap_dm9000_init(void)
+{
+	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
+			OMAP_DM9000_GPIO_IRQ);
+		return;
+		}
+
+	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+}
+
+static struct platform_device *devkit8000_devices[] __initdata = {
+	&devkit8000_dss_device,
+	&leds_gpio,
+	&keys_gpio,
+	&omap_dm9000_dev,
+};
+
+static void __init devkit8000_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		devkit8000_nand_data.cs = nandcs;
+		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		devkit8000_nand_data.gpmc_baseaddr = (void *)
+			(gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&devkit8000_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static struct omap_board_mux board_mux[] __initdata = {
+	/* nCS and IRQ for Devkit8000 ethernet */
+	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
+	OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* McSPI 2*/
+	OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* PENDOWN GPIO */
+	OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* USB 1 */
+	OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+
+	/* MMC 1 */
+	OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McBSP 2 */
+	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* I2C 1 */
+	OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 2 */
+	OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 4 */
+	OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* serial ports */
+	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* DSS */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* expansion port */
+	/* McSPI 1 */
+	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+	/* HDQ */
+	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McSPI4 */
+	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+	/* MMC 2 */
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+	/* I2C3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	/* TPS IRQ */
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+			OMAP_PIN_INPUT_PULLUP),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static void __init devkit8000_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+	omap_serial_init();
+
+	omap_dm9000_init();
+
+	devkit8000_i2c_init();
+	platform_add_devices(devkit8000_devices,
+			ARRAY_SIZE(devkit8000_devices));
+	omap_board_config = devkit8000_config;
+	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+
+	spi_register_board_info(devkit8000_spi_board_info,
+	ARRAY_SIZE(devkit8000_spi_board_info));
+
+	devkit8000_ads7846_init();
+
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
+	devkit8000_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init devkit8000_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= devkit8000_map_io,
+	.init_irq	= devkit8000_init_irq,
+	.init_machine	= devkit8000_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 7e6e6ca..16cc068 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -50,7 +50,7 @@ static void __init omap_generic_init(void)
 static void __init omap_generic_map_io(void)
 {
 	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index cfb7f12..0665f2c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -29,7 +30,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/control.h>
 #include <mach/gpio.h>
@@ -115,8 +115,7 @@ static struct mtd_partition h4_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h4_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h4_flash_data = {
 	.width		= 2,
 	.parts		= h4_partitions,
 	.nr_parts	= ARRAY_SIZE(h4_partitions),
@@ -127,7 +126,7 @@ static struct resource h4_flash_resource = {
 };
 
 static struct platform_device h4_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h4_flash_data,
@@ -370,7 +369,7 @@ static void __init omap_h4_init(void)
 static void __init omap_h4_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 117b8fd..d55c57b 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -28,16 +28,121 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/onenand.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
 #define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_RED 	26
-#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED0_GREEN 	26
+#define IGEP2_GPIO_LED0_RED 	27
 #define IGEP2_GPIO_LED1_RED   	28
+#define IGEP2_GPIO_DVI_PUP	170
+#define IGEP2_GPIO_WIFI_NPD 	94
+#define IGEP2_GPIO_WIFI_NRESET 	95
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP             0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep2_onenand_partitions[] = {
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 2 * (64*(2*2048))
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 6 * (64*(2*2048)),
+	},
+	{
+		.name           = "Environment",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2 * (64*(2*2048)),
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 12 * (64*(2*2048)),
+	},
+	{
+		.name           = "File System",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
+{
+       /* nothing is required to be setup for onenand as of now */
+       return 0;
+}
+
+static struct omap_onenand_platform_data igep2_onenand_data = {
+	.parts = igep2_onenand_partitions,
+	.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
+	.onenand_setup = igep2_onenand_setup,
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep2_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+	.dev = {
+		.platform_data = &igep2_onenand_data,
+	},
+};
+
+void __init igep2_flash_init(void)
+{
+	u8		cs = 0;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* Check if NAND/oneNAND is configured */
+		if ((ret & 0xC00) == 0x800)
+			/* NAND found */
+			pr_err("IGEP v2: Unsupported NAND found\n");
+		else {
+			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+				/* ONENAND found */
+				onenandcs = cs;
+		}
+		cs++;
+	}
+	if (onenandcs > GPMC_CS_NUM) {
+		pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+		return;
+	}
+
+	if (onenandcs < GPMC_CS_NUM) {
+		igep2_onenand_data.cs = onenandcs;
+		if (platform_device_register(&igep2_onenand_device) < 0)
+			pr_err("IGEP v2: Unable to register OneNAND device\n");
+	}
+}
+
+#else
+void __init igep2_flash_init(void) {}
+#endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
@@ -106,6 +211,10 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
 
+static struct regulator_consumer_supply igep2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
 	.constraints = {
@@ -121,7 +230,22 @@ static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
+static struct regulator_init_data igep2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc2_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -142,12 +266,13 @@ static int igep2_twl_gpio_setup(struct device *dev,
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
 	*/
 	igep2_vmmc1_supply.dev = mmc[0].dev;
+	igep2_vmmc2_supply.dev = mmc[1].dev;
 
 	return 0;
 };
@@ -164,23 +289,146 @@ static struct twl4030_usb_data igep2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static int igep2_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
+
+	return 0;
+}
+
+static void igep2_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
+}
+
+static struct omap_dss_device igep2_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= igep2_enable_dvi,
+	.platform_disable	= igep2_disable_dvi,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+	&igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
+	.devices	= igep2_dss_devices,
+	.default_device	= &igep2_dvi_device,
+};
+
+static struct platform_device igep2_dss_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &igep2_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply igep2_vpll2_supply = {
+	.supply	= "vdds_dsi",
+	.dev	= &igep2_dss_device.dev,
+};
+
+static struct regulator_init_data igep2_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &igep2_vpll2_supply,
+};
+
+static void __init igep2_display_init(void)
+{
+	if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
+	    gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
+}
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
+	{
+		.name = "led0:red",
+		.gpio = IGEP2_GPIO_LED0_RED,
+	},
+	{
+		.name = "led0:green",
+		.default_trigger = "heartbeat",
+		.gpio = IGEP2_GPIO_LED0_GREEN,
+	},
+	{
+		.name = "led1:red",
+		.gpio = IGEP2_GPIO_LED1_RED,
+	},
+};
+
+static struct gpio_led_platform_data igep2_led_pdata = {
+	.leds           = igep2_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
+};
+
+static struct platform_device igep2_led_device = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &igep2_led_pdata,
+	},
+};
+
+static void __init igep2_init_led(void)
+{
+	platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_init_led(void) {}
+#endif
+
+static struct platform_device *igep2_devices[] __initdata = {
+	&igep2_dss_device,
+};
+
 static void __init igep2_init_irq(void)
 {
 	omap_board_config = igep2_config;
 	omap_board_config_size = ARRAY_SIZE(igep2_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
+static struct twl4030_codec_audio_data igep2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data igep2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &igep2_audio_data,
+};
+
 static struct twl4030_platform_data igep2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.usb		= &igep2_usb_data,
+	.codec		= &igep2_codec_data,
 	.gpio		= &igep2_gpio_data,
 	.vmmc1          = &igep2_vmmc1,
+	.vmmc2		= &igep2_vmmc2,
+	.vpll2		= &igep2_vpll2,
 
 };
 
@@ -203,6 +451,23 @@ static int __init igep2_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset = true,
+	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
+	.reset_gpio_port[1] = -EINVAL,
+	.reset_gpio_port[2] = -EINVAL,
+};
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -215,38 +480,62 @@ static void __init igep2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	igep2_i2c_init();
+	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
 
+	igep2_flash_init();
+	igep2_init_led();
+	igep2_display_init();
 	igep2_init_smsc911x();
 
 	/* GPIO userspace leds */
-	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
-	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
 		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
 
-	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+#endif
+
+	/* GPIO W-LAN + Bluetooth combo module */
+	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
+/* 		gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+	if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
+		udelay(10);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
 static void __init igep2_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 995d4a2..fefd7e6 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -44,7 +44,7 @@
 #include <plat/usb.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152
@@ -209,8 +209,7 @@ static void ads7846_dev_init(void)
 	}
 
 	gpio_direction_input(ts_gpio);
-	omap_set_gpio_debounce(ts_gpio, 1);
-	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+	gpio_set_debounce(ts_gpio, 310);
 }
 
 static int ads7846_get_pendown_state(void)
@@ -359,7 +358,7 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -383,6 +382,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -394,9 +399,9 @@ static void __init omap_ldp_init(void)
 				ARRAY_SIZE(ldp_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
@@ -404,7 +409,7 @@ static void __init omap_ldp_init(void)
 static void __init omap_ldp_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 764ab1e..3ccc34e 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/stddef.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
 
@@ -25,11 +26,114 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/menelaus.h>
 #include <mach/irqs.h>
 #include <plat/mcspi.h>
 #include <plat/onenand.h>
+#include <plat/mmc.h>
 #include <plat/serial.h>
 
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
+
+#define TUSB6010_ASYNC_CS	1
+#define TUSB6010_SYNC_CS	4
+#define TUSB6010_GPIO_INT	58
+#define TUSB6010_GPIO_ENABLE	0
+#define TUSB6010_DMACHAN	0x3f
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_USB_TUSB6010_MODULE)
+/*
+ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+ * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+ * provide then PGOOD signal to TUSB6010 which will release it from reset.
+ */
+static int tusb_set_power(int state)
+{
+	int i, retval = 0;
+
+	if (state) {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
+		msleep(1);
+
+		/* Wait until TUSB6010 pulls INT pin down */
+		i = 100;
+		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
+			msleep(1);
+			i--;
+		}
+
+		if (!i) {
+			printk(KERN_ERR "tusb: powerup failed\n");
+			retval = -ENODEV;
+		}
+	} else {
+		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
+		msleep(10);
+	}
+
+	return retval;
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 1,
+	.dyn_fifo	= 1,
+	.num_eps	= 16,
+	.ram_bits	= 12,
+};
+
+static struct musb_hdrc_platform_data tusb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode		= MUSB_PERIPHERAL,
+#else /* defined(CONFIG_USB_MUSB_HOST) */
+	.mode		= MUSB_HOST,
+#endif
+	.set_power	= tusb_set_power,
+	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
+	.power		= 100,	/* Max 100 mA VBUS for host mode */
+	.config		= &musb_config,
+};
+
+static void __init n8x0_usb_init(void)
+{
+	int ret = 0;
+	static char	announce[] __initdata = KERN_INFO "TUSB 6010\n";
+
+	/* PM companion chip power control pin */
+	ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
+	if (ret != 0) {
+		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
+		       TUSB6010_GPIO_ENABLE);
+		return;
+	}
+	gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
+
+	tusb_set_power(0);
+
+	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
+					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+	if (ret != 0)
+		goto err;
+
+	printk(announce);
+
+	return;
+
+err:
+	gpio_free(TUSB6010_GPIO_ENABLE);
+}
+#else
+
+static void __init n8x0_usb_init(void) {}
+
+#endif /*CONFIG_USB_TUSB6010 */
+
+
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel = 1,
@@ -96,10 +200,446 @@ static void __init n8x0_onenand_init(void) {}
 
 #endif
 
+#if defined(CONFIG_MENELAUS) &&						\
+	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+
+/*
+ * On both N800 and N810, only the first of the two MMC controllers is in use.
+ * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
+ * On N800, both slots are powered via Menelaus. On N810, only one of the
+ * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
+ *
+ * VMMC				slot 1 on both N800 and N810
+ * VDCDC3_APE and VMCS2_APE	slot 2 on N800
+ * GPIO23 and GPIO9		slot 2 EMMC on N810
+ *
+ */
+#define N8X0_SLOT_SWITCH_GPIO	96
+#define N810_EMMC_VSD_GPIO	23
+#define N810_EMMC_VIO_GPIO	9
+
+static int n8x0_mmc_switch_slot(struct device *dev, int slot)
+{
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Choose slot %d\n", slot + 1);
+#endif
+	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
+	return 0;
+}
+
+static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
+					int power_on, int vdd)
+{
+	int mV;
+
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+		power_on ? "on" : "off", vdd);
+#endif
+	if (slot == 0) {
+		if (!power_on)
+			return menelaus_set_vmmc(0);
+		switch (1 << vdd) {
+		case MMC_VDD_33_34:
+		case MMC_VDD_32_33:
+		case MMC_VDD_31_32:
+			mV = 3100;
+			break;
+		case MMC_VDD_30_31:
+			mV = 3000;
+			break;
+		case MMC_VDD_28_29:
+			mV = 2800;
+			break;
+		case MMC_VDD_165_195:
+			mV = 1850;
+			break;
+		default:
+			BUG();
+		}
+		return menelaus_set_vmmc(mV);
+	} else {
+		if (!power_on)
+			return menelaus_set_vdcdc(3, 0);
+		switch (1 << vdd) {
+		case MMC_VDD_33_34:
+		case MMC_VDD_32_33:
+			mV = 3300;
+			break;
+		case MMC_VDD_30_31:
+		case MMC_VDD_29_30:
+			mV = 3000;
+			break;
+		case MMC_VDD_28_29:
+		case MMC_VDD_27_28:
+			mV = 2800;
+			break;
+		case MMC_VDD_24_25:
+		case MMC_VDD_23_24:
+			mV = 2400;
+			break;
+		case MMC_VDD_22_23:
+		case MMC_VDD_21_22:
+			mV = 2200;
+			break;
+		case MMC_VDD_20_21:
+			mV = 2000;
+			break;
+		case MMC_VDD_165_195:
+			mV = 1800;
+			break;
+		default:
+			BUG();
+		}
+		return menelaus_set_vdcdc(3, mV);
+	}
+	return 0;
+}
+
+static void n810_set_power_emmc(struct device *dev,
+					 int power_on)
+{
+	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
+
+	if (power_on) {
+		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
+		msleep(1);
+		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
+		msleep(1);
+	} else {
+		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
+		msleep(50);
+		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
+		msleep(50);
+	}
+}
+
+static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
+			      int vdd)
+{
+	if (machine_is_nokia_n800() || slot == 0)
+		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
+
+	n810_set_power_emmc(dev, power_on);
+
+	return 0;
+}
+
+static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+	int r;
+
+	dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
+		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+	BUG_ON(slot != 0 && slot != 1);
+	slot++;
+	switch (bus_mode) {
+	case MMC_BUSMODE_OPENDRAIN:
+		r = menelaus_set_mmc_opendrain(slot, 1);
+		break;
+	case MMC_BUSMODE_PUSHPULL:
+		r = menelaus_set_mmc_opendrain(slot, 0);
+		break;
+	default:
+		BUG();
+	}
+	if (r != 0 && printk_ratelimit())
+		dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
+			slot);
+	return r;
+}
+
+static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
+{
+	slot++;
+	BUG_ON(slot != 1 && slot != 2);
+	if (slot == 1)
+		return slot1_cover_open;
+	else
+		return slot2_cover_open;
+}
+
+static void n8x0_mmc_callback(void *data, u8 card_mask)
+{
+	int bit, *openp, index;
+
+	if (machine_is_nokia_n800()) {
+		bit = 1 << 1;
+		openp = &slot2_cover_open;
+		index = 1;
+	} else {
+		bit = 1;
+		openp = &slot1_cover_open;
+		index = 0;
+	}
+
+	if (card_mask & bit)
+		*openp = 1;
+	else
+		*openp = 0;
+
+	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
+{
+	if (mmc_device == NULL)
+		return;
+
+	slot1_cover_open = !closed_state;
+	omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
+}
+
+static int n8x0_mmc_late_init(struct device *dev)
+{
+	int r, bit, *openp;
+	int vs2sel;
+
+	mmc_device = dev;
+
+	r = menelaus_set_slot_sel(1);
+	if (r < 0)
+		return r;
+
+	if (machine_is_nokia_n800())
+		vs2sel = 0;
+	else
+		vs2sel = 2;
+
+	r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
+	if (r < 0)
+		return r;
+
+	n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
+	n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
+
+	r = menelaus_set_mmc_slot(1, 1, 0, 1);
+	if (r < 0)
+		return r;
+	r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
+	if (r < 0)
+		return r;
+
+	r = menelaus_get_slot_pin_states();
+	if (r < 0)
+		return r;
+
+	if (machine_is_nokia_n800()) {
+		bit = 1 << 1;
+		openp = &slot2_cover_open;
+	} else {
+		bit = 1;
+		openp = &slot1_cover_open;
+		slot2_cover_open = 0;
+	}
+
+	/* All slot pin bits seem to be inversed until first switch change */
+	if (r == 0xf || r == (0xf & ~bit))
+		r = ~r;
+
+	if (r & bit)
+		*openp = 1;
+	else
+		*openp = 0;
+
+	r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
+
+	return r;
+}
+
+static void n8x0_mmc_shutdown(struct device *dev)
+{
+	int vs2sel;
+
+	if (machine_is_nokia_n800())
+		vs2sel = 0;
+	else
+		vs2sel = 2;
+
+	menelaus_set_mmc_slot(1, 0, 0, 0);
+	menelaus_set_mmc_slot(2, 0, vs2sel, 0);
+}
+
+static void n8x0_mmc_cleanup(struct device *dev)
+{
+	menelaus_unregister_mmc_callback();
+
+	gpio_free(N8X0_SLOT_SWITCH_GPIO);
+
+	if (machine_is_nokia_n810()) {
+		gpio_free(N810_EMMC_VSD_GPIO);
+		gpio_free(N810_EMMC_VIO_GPIO);
+	}
+}
+
+/*
+ * MMC controller1 has two slots that are multiplexed via I2C.
+ * MMC controller2 is not in use.
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots			= 2,
+	.switch_slot			= n8x0_mmc_switch_slot,
+	.init				= n8x0_mmc_late_init,
+	.cleanup			= n8x0_mmc_cleanup,
+	.shutdown			= n8x0_mmc_shutdown,
+	.max_freq			= 24000000,
+	.dma_mask			= 0xffffffff,
+	.slots[0] = {
+		.wires			= 4,
+		.set_power		= n8x0_mmc_set_power,
+		.set_bus_mode		= n8x0_mmc_set_bus_mode,
+		.get_cover_state	= n8x0_mmc_get_cover_state,
+		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_30_31 |
+						MMC_VDD_32_33   | MMC_VDD_33_34,
+		.name			= "internal",
+	},
+	.slots[1] = {
+		.set_power		= n8x0_mmc_set_power,
+		.set_bus_mode		= n8x0_mmc_set_bus_mode,
+		.get_cover_state	= n8x0_mmc_get_cover_state,
+		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_20_21 |
+						MMC_VDD_21_22 | MMC_VDD_22_23 |
+						MMC_VDD_23_24 | MMC_VDD_24_25 |
+						MMC_VDD_27_28 | MMC_VDD_28_29 |
+						MMC_VDD_29_30 | MMC_VDD_30_31 |
+						MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name			= "external",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
+
+void __init n8x0_mmc_init(void)
+
+{
+	int err;
+
+	if (machine_is_nokia_n810()) {
+		mmc1_data.slots[0].name = "external";
+
+		/*
+		 * Some Samsung Movinand chips do not like open-ended
+		 * multi-block reads and fall to braind-dead state
+		 * while doing so. Reducing the number of blocks in
+		 * the transfer or delays in clock disable do not help
+		 */
+		mmc1_data.slots[1].name = "internal";
+		mmc1_data.slots[1].ban_openended = 1;
+	}
+
+	err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
+	if (err)
+		return;
+
+	gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
+
+	if (machine_is_nokia_n810()) {
+		err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
+		if (err) {
+			gpio_free(N8X0_SLOT_SWITCH_GPIO);
+			return;
+		}
+		gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
+
+		err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+		if (err) {
+			gpio_free(N8X0_SLOT_SWITCH_GPIO);
+			gpio_free(N810_EMMC_VSD_GPIO);
+			return;
+		}
+		gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
+	}
+
+	mmc_data[0] = &mmc1_data;
+	omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC);
+}
+#else
+
+void __init n8x0_mmc_init(void)
+{
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int state)
+{
+}
+
+#endif	/* CONFIG_MMC_OMAP */
+
+#ifdef CONFIG_MENELAUS
+
+static int n8x0_auto_sleep_regulators(void)
+{
+	u32 val;
+	int ret;
+
+	val = EN_VPLL_SLEEP | EN_VMMC_SLEEP    \
+		| EN_VAUX_SLEEP | EN_VIO_SLEEP \
+		| EN_VMEM_SLEEP | EN_DC3_SLEEP \
+		| EN_VC_SLEEP | EN_DC2_SLEEP;
+
+	ret = menelaus_set_regulator_sleep(1, val);
+	if (ret < 0) {
+		printk(KERN_ERR "Could not set regulators to sleep on "
+			"menelaus: %u\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int n8x0_auto_voltage_scale(void)
+{
+	int ret;
+
+	ret = menelaus_set_vcore_hw(1400, 1050);
+	if (ret < 0) {
+		printk(KERN_ERR "Could not set VCORE voltage on "
+			"menelaus: %u\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int n8x0_menelaus_late_init(struct device *dev)
+{
+	int ret;
+
+	ret = n8x0_auto_voltage_scale();
+	if (ret < 0)
+		return ret;
+	ret = n8x0_auto_sleep_regulators();
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
+	{
+		I2C_BOARD_INFO("menelaus", 0x72),
+		.irq = INT_24XX_SYS_NIRQ,
+	},
+};
+
+static struct menelaus_platform_data n8x0_menelaus_platform_data = {
+	.late_init = n8x0_menelaus_late_init,
+};
+
+static void __init n8x0_menelaus_init(void)
+{
+	n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
+	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+			      ARRAY_SIZE(n8x0_i2c_board_info_1));
+}
+
+#else
+static inline void __init n8x0_menelaus_init(void)
+{
+}
+#endif
+
 static void __init n8x0_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 static void __init n8x0_init_irq(void)
@@ -116,7 +656,10 @@ static void __init n8x0_init_machine(void)
 				ARRAY_SIZE(n800_spi_board_info));
 
 	omap_serial_init();
+	n8x0_menelaus_init();
 	n8x0_onenand_init();
+	n8x0_mmc_init();
+	n8x0_usb_init();
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 231cb4e..69b154c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -39,13 +39,14 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/display.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
 #include <plat/timer-gp.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
@@ -106,9 +107,80 @@ static struct platform_device omap3beagle_nand_device = {
 	.resource	= &omap3beagle_nand_resource,
 };
 
+/* DSS */
+
+static int beagle_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
+
+	return 0;
+}
+
+static void beagle_disable_dvi(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device beagle_dvi_device = {
+	.type = OMAP_DISPLAY_TYPE_DPI,
+	.name = "dvi",
+	.driver_name = "generic_panel",
+	.phy.dpi.data_lines = 24,
+	.reset_gpio = 170,
+	.platform_enable = beagle_enable_dvi,
+	.platform_disable = beagle_disable_dvi,
+};
+
+static struct omap_dss_device beagle_tv_device = {
+	.name = "tv",
+	.driver_name = "venc",
+	.type = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *beagle_dss_devices[] = {
+	&beagle_dvi_device,
+	&beagle_tv_device,
+};
+
+static struct omap_dss_board_info beagle_dss_data = {
+	.num_devices = ARRAY_SIZE(beagle_dss_devices),
+	.devices = beagle_dss_devices,
+	.default_device = &beagle_dvi_device,
+};
+
+static struct platform_device beagle_dss_device = {
+	.name          = "omapdss",
+	.id            = -1,
+	.dev            = {
+		.platform_data = &beagle_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply beagle_vdac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply beagle_vdvi_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+
+static void __init beagle_display_init(void)
+{
+	int r;
+
+	r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
+	if (r < 0) {
+		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
+		return;
+	}
+
+	gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
+}
+
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 8,
@@ -117,15 +189,6 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct regulator_consumer_supply beagle_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -147,7 +210,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	beagle_vmmc1_supply.dev = mmc[0].dev;
@@ -181,16 +244,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
 	.setup		= beagle_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply beagle_vdac_supply = {
-	.supply		= "vdac",
-	.dev		= &omap3_beagle_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &omap3_beagle_lcd_device.dev,
-};
-
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data beagle_vmmc1 = {
 	.constraints = {
@@ -349,14 +402,8 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
-};
-
 static void __init omap3_beagle_init_irq(void)
 {
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -367,9 +414,9 @@ static void __init omap3_beagle_init_irq(void)
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
-	&omap3_beagle_lcd_device,
 	&leds_gpio,
 	&keys_gpio,
+	&beagle_dss_device,
 };
 
 static void __init omap3beagle_flash_init(void)
@@ -410,7 +457,7 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -430,6 +477,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -443,19 +496,21 @@ static void __init omap3_beagle_init(void)
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+	beagle_display_init();
 }
 
 static void __init omap3_beagle_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 34de178..b952610 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,10 +41,11 @@
 #include <plat/usb.h>
 #include <plat/common.h>
 #include <plat/mcspi.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
@@ -147,6 +148,187 @@ static inline void __init omap3evm_init_smsc911x(void)
 static inline void __init omap3evm_init_smsc911x(void) { return; }
 #endif
 
+/*
+ * OMAP3EVM LCD Panel control signals
+ */
+#define OMAP3EVM_LCD_PANEL_LR		2
+#define OMAP3EVM_LCD_PANEL_UD		3
+#define OMAP3EVM_LCD_PANEL_INI		152
+#define OMAP3EVM_LCD_PANEL_ENVDD	153
+#define OMAP3EVM_LCD_PANEL_QVGA		154
+#define OMAP3EVM_LCD_PANEL_RESB		155
+#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
+#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_evm_display_init(void)
+{
+	int r;
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_resb\n");
+		return;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_ini\n");
+		goto err_1;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_qvga\n");
+		goto err_2;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_lr\n");
+		goto err_3;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_ud\n");
+		goto err_4;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_envdd\n");
+		goto err_5;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+	return;
+
+err_5:
+	gpio_free(OMAP3EVM_LCD_PANEL_UD);
+err_4:
+	gpio_free(OMAP3EVM_LCD_PANEL_LR);
+err_3:
+	gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
+err_2:
+	gpio_free(OMAP3EVM_LCD_PANEL_INI);
+err_1:
+	gpio_free(OMAP3EVM_LCD_PANEL_RESB);
+
+}
+
+static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+	else
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
+
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+	else
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "sharp_ls_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.platform_enable	= omap3_evm_enable_lcd,
+	.platform_disable	= omap3_evm_disable_lcd,
+};
+
+static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_evm_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= omap3_evm_enable_tv,
+	.platform_disable	= omap3_evm_disable_tv,
+};
+
+static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
+
+	dvi_enabled = 1;
+	return 0;
+}
+
+static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= omap3_evm_enable_dvi,
+	.platform_disable	= omap3_evm_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_evm_dss_devices[] = {
+	&omap3_evm_lcd_device,
+	&omap3_evm_tv_device,
+	&omap3_evm_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_evm_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
+	.devices	= omap3_evm_dss_devices,
+	.default_device	= &omap3_evm_lcd_device,
+};
+
+static struct platform_device omap3_evm_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &omap3_evm_dss_data,
+	},
+};
+
 static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -185,7 +367,7 @@ static struct regulator_init_data omap3evm_vsim = {
 	.consumer_supplies	= &omap3evm_vsim_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -225,7 +407,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	omap3evm_vmmc1_supply.dev = mmc[0].dev;
@@ -236,6 +418,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	 * the P2 connector; notably LEDA for the LCD backlight.
 	 */
 
+	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* gpio + 7 == DVI Enable */
+	gpio_request(gpio + 7, "EN_DVI");
+	gpio_direction_output(gpio + 7, 0);
+
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
@@ -258,20 +448,23 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_ENTER),
+	KEY(0, 3, KEY_M),
+
+	KEY(1, 0, KEY_RIGHT),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
+	KEY(1, 2, KEY_I),
+	KEY(1, 3, KEY_N),
+
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_E),
 	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
+	KEY(2, 3, KEY_O),
+
+	KEY(3, 0, KEY_B),
+	KEY(3, 1, KEY_F),
+	KEY(3, 2, KEY_K),
 	KEY(3, 3, KEY_P)
 };
 
@@ -300,6 +493,47 @@ static struct twl4030_codec_data omap3evm_codec_data = {
 	.audio = &omap3evm_audio_data,
 };
 
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &omap3_evm_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_evm_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_evm_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_evm_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_evm_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_evm_vpll2_supply,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -310,6 +544,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
 	.codec		= &omap3evm_codec_data,
+	.vdac		= &omap3_evm_vdac,
+	.vpll2		= &omap3_evm_vpll2,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -337,24 +573,13 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct platform_device omap3_evm_lcd_device = {
-	.name		= "omap3evm_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static void ads7846_dev_init(void)
 {
 	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_EVM_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)
@@ -373,6 +598,7 @@ struct ads7846_platform_data ads7846_config = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 	.settle_delay_usecs	= 150,
+	.wakeup				= true,
 };
 
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -393,7 +619,6 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 };
 
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
 };
 
 static void __init omap3_evm_init_irq(void)
@@ -406,10 +631,10 @@ static void __init omap3_evm_init_irq(void)
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
-	&omap3_evm_lcd_device,
+	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -424,12 +649,23 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
+				OMAP_PIN_OFF_WAKEUPENABLE),
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
@@ -443,10 +679,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
-#endif
+
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
 		/* enable EHCI VBUS using GPIO22 */
 		omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
@@ -464,21 +700,25 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
 		ehci_pdata.reset_gpio_port[1] = 21;
 
+		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
+		musb_board_data.power = 500;
+		musb_board_data.extvbus = 1;
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		ehci_pdata.reset_gpio_port[1] = 135;
 	}
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
+	omap3_evm_display_init();
 }
 
 static void __init omap3_evm_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ef17cf1..db06dc9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,10 +40,11 @@
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
@@ -129,8 +130,8 @@ static struct platform_device pandora_keys_gpio = {
 static void __init pandora_keys_gpio_init(void)
 {
 	/* set debounce time for GPIO banks 4 and 6 */
-	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
-	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
+	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
 static int board_keymap[] = {
@@ -192,7 +193,41 @@ static struct twl4030_keypad_data pandora_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
+static struct omap_dss_device pandora_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "tpo_td043mtea1_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= 157,
+};
+
+static struct omap_dss_device pandora_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *pandora_dss_devices[] = {
+	&pandora_lcd_device,
+	&pandora_tv_device,
+};
+
+static struct omap_dss_board_info pandora_dss_data = {
+	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
+	.devices	= pandora_dss_devices,
+	.default_device	= &pandora_lcd_device,
+};
+
+static struct platform_device pandora_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &pandora_dss_data,
+	},
+};
+
+static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -217,25 +252,13 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply pandora_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply = {
-	.supply			= "vmmc",
-};
-
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(omap3pandora_mmc);
-
-	/* link regulators to MMC adapters */
-	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
-	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+	omap2_hsmmc_init(omap3pandora_mmc);
 
 	return 0;
 }
@@ -247,6 +270,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply pandora_vmmc2_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+	REGULATOR_SUPPLY("vcc", "display0");
+
+static struct regulator_consumer_supply pandora_usb_phy_supply =
+	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+
+/* ads7846 on SPI and 2 nub controllers on I2C */
+static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+	REGULATOR_SUPPLY("vcc", "3-0066"),
+	REGULATOR_SUPPLY("vcc", "3-0067"),
+};
+
+static struct regulator_consumer_supply pandora_adac_supply =
+	REGULATOR_SUPPLY("vcc", "soc-audio");
+
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data pandora_vmmc1 = {
 	.constraints = {
@@ -277,6 +330,96 @@ static struct regulator_init_data pandora_vmmc2 = {
 	.consumer_supplies	= &pandora_vmmc2_supply,
 };
 
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data pandora_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data pandora_vpll2 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
+	.consumer_supplies	= pandora_vdds_supplies,
+};
+
+/* VAUX1 for LCD */
+static struct regulator_init_data pandora_vaux1 = {
+	.constraints = {
+		.min_uV			= 3000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vcc_lcd_supply,
+};
+
+/* VAUX2 for USB host PHY */
+static struct regulator_init_data pandora_vaux2 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_usb_phy_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data pandora_vaux4 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
+	.consumer_supplies	= pandora_vaux4_supplies,
+};
+
+/* VSIM for audio DAC */
+static struct regulator_init_data pandora_vsim = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_adac_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -298,6 +441,12 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
+	.vdac		= &pandora_vdac,
+	.vpll2		= &pandora_vpll2,
+	.vaux1		= &pandora_vaux1,
+	.vaux2		= &pandora_vaux2,
+	.vaux4		= &pandora_vaux4,
+	.vsim		= &pandora_vsim,
 	.keypad		= &pandora_kp_data,
 };
 
@@ -310,12 +459,20 @@ static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("bq27500", 0x55),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
 static int __init omap3pandora_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
 			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
 	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, NULL, 0);
+	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
+			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
 	return 0;
 }
 
@@ -365,6 +522,12 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 		.controller_data	= &ads7846_mcspi_config,
 		.irq			= OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
 		.platform_data		= &ads7846_config,
+	}, {
+		.modalias		= "tpo_td043mtea1_panel_spi",
+		.bus_num		= 1,
+		.chip_select		= 1,
+		.max_speed_hz		= 375000,
+		.platform_data		= &pandora_lcd_device,
 	}
 };
 
@@ -379,9 +542,10 @@ static void __init omap3pandora_init_irq(void)
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
+	&pandora_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
@@ -401,6 +565,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -413,7 +583,7 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -423,7 +593,7 @@ static void __init omap3pandora_init(void)
 static void __init omap3pandora_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
new file mode 100644
index 0000000..a04cffd
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -0,0 +1,670 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Guangzhou EMA-Tech
+ *
+ * Modified from mach-omap2/board-omap3evm.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mux.h"
+#include "hsmmc.h"
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#define OMAP3STALKER_ETHR_START	0x2c000000
+#define OMAP3STALKER_ETHR_SIZE	1024
+#define OMAP3STALKER_ETHR_GPIO_IRQ	19
+#define OMAP3STALKER_SMC911X_CS	5
+
+static struct resource omap3stalker_smsc911x_resources[] = {
+	[0] = {
+	       .start	= OMAP3STALKER_ETHR_START,
+	       .end	=
+	       (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1),
+	       .flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+	       .start	= OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+	       .end	= OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+	       .flags	= (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3stalker_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3stalker_smsc911x_resources),
+	.resource	= &omap3stalker_smsc911x_resources[0],
+	.dev		= {
+		.platform_data	= &smsc911x_config,
+	},
+};
+
+static inline void __init omap3stalker_init_eth(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3STALKER_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
+	if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR
+		       "Failed to request GPIO%d for smc911x IRQ\n",
+		       OMAP3STALKER_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ);
+
+	platform_device_register(&omap3stalker_smsc911x_device);
+}
+
+#else
+static inline void __init omap3stalker_init_eth(void)
+{
+	return;
+}
+#endif
+
+/*
+ * OMAP3 DSS control signals
+ */
+
+#define DSS_ENABLE_GPIO	199
+#define LCD_PANEL_BKLIGHT_GPIO	210
+#define ENABLE_VPLL2_DEV_GRP	0xE0
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_stalker_display_init(void)
+{
+	return;
+}
+
+static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(DSS_ENABLE_GPIO, 1);
+	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DSS_ENABLE_GPIO, 0);
+	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.platform_enable	= omap3_stalker_enable_lcd,
+	.platform_disable	= omap3_stalker_disable_lcd,
+};
+
+static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_stalker_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+	.platform_enable	= omap3_stalker_enable_tv,
+	.platform_disable	= omap3_stalker_disable_tv,
+};
+
+static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(DSS_ENABLE_GPIO, 1);
+	dvi_enabled = 1;
+	return 0;
+}
+
+static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DSS_ENABLE_GPIO, 0);
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= omap3_stalker_enable_dvi,
+	.platform_disable	= omap3_stalker_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_stalker_dss_devices[] = {
+	&omap3_stalker_lcd_device,
+	&omap3_stalker_tv_device,
+	&omap3_stalker_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_stalker_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
+	.devices	= omap3_stalker_dss_devices,
+	.default_device	= &omap3_stalker_dvi_device,
+};
+
+static struct platform_device omap3_stalker_dss_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &omap3_stalker_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply omap3stalker_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3stalker_vmmc1 = {
+	.constraints		= {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3stalker_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3stalker_vsim = {
+	.constraints		= {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3stalker_vsim_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+	 .mmc		= 1,
+	 .wires		= 4,
+	 .gpio_cd	= -EINVAL,
+	 .gpio_wp	= 23,
+	 },
+	{}			/* Terminator */
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+	 .code		= BTN_EXTRA,
+	 .gpio		= 18,
+	 .desc		= "user",
+	 .wakeup	= 1,
+	 },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+	 .name			= "stalker:D8:usr0",
+	 .default_trigger	= "default-on",
+	 .gpio			= 126,
+	 },
+	{
+	 .name			= "stalker:D9:usr1",
+	 .default_trigger	= "default-on",
+	 .gpio			= 127,
+	 },
+	{
+	 .name			= "stalker:D3:mmc0",
+	 .gpio			= -EINVAL,	/* gets replaced */
+	 .active_low		= true,
+	 .default_trigger	= "mmc0",
+	 },
+	{
+	 .name			= "stalker:D4:heartbeat",
+	 .gpio			= -EINVAL,	/* gets replaced */
+	 .active_low		= true,
+	 .default_trigger	= "heartbeat",
+	 },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static int
+omap3stalker_twl_gpio_setup(struct device *dev,
+			    unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+	mmc[0].gpio_cd = gpio + 0;
+	omap2_hsmmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
+	omap3stalker_vsim_supply.dev = mmc[0].dev;
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* gpio + 7 == DVI Enable */
+	gpio_request(gpio + 7, "EN_DVI");
+	gpio_direction_output(gpio + 7, 0);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	/* GPIO + 13 == ledsync (out, heartbeat) */
+	gpio_leds[3].gpio = gpio + 13;
+
+	platform_device_register(&leds_gpio);
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3stalker_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3stalker_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int board_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_ENTER),
+	KEY(0, 3, KEY_M),
+
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_I),
+	KEY(1, 3, KEY_N),
+
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_E),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_O),
+
+	KEY(3, 0, KEY_B),
+	KEY(3, 1, KEY_F),
+	KEY(3, 2, KEY_K),
+	KEY(3, 3, KEY_P)
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap		= board_keymap,
+	.keymap_size	= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data omap3stalker_kp_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 4,
+	.cols		= 4,
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3stalker_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data omap3stalker_audio_data = {
+	.audio_mclk	= 26000000,
+};
+
+static struct twl4030_codec_data omap3stalker_codec_data = {
+	.audio_mclk	= 26000000,
+	.audio		= &omap3stalker_audio_data,
+};
+
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &omap3_stalker_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_stalker_vdac = {
+	.constraints		= {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+		| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_stalker_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_stalker_vpll2_supply = {
+	.supply		= "vdds_dsi",
+	.dev		= &omap3_stalker_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_stalker_vpll2 = {
+	.constraints		= {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV = true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+		| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_stalker_vpll2_supply,
+};
+
+static struct twl4030_platform_data omap3stalker_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3stalker_kp_data,
+	.madc		= &omap3stalker_madc_data,
+	.usb		= &omap3stalker_usb_data,
+	.gpio		= &omap3stalker_gpio_data,
+	.codec		= &omap3stalker_codec_data,
+	.vdac		= &omap3_stalker_vdac,
+	.vpll2		= &omap3_stalker_vpll2,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = {
+	{
+	 I2C_BOARD_INFO("twl4030", 0x48),
+	 .flags		= I2C_CLIENT_WAKE,
+	 .irq		= INT_34XX_SYS_NIRQ,
+	 .platform_data	= &omap3stalker_twldata,
+	 },
+};
+
+static struct at24_platform_data fram_info = {
+	.byte_len	= (64 * 1024) / 8,
+	.page_size	= 8192,
+	.flags		= AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
+	{
+	 I2C_BOARD_INFO("24c64", 0x50),
+	 .flags		= I2C_CLIENT_WAKE,
+	 .platform_data	= &fram_info,
+	 },
+};
+
+static int __init omap3_stalker_i2c_init(void)
+{
+	/*
+	 * REVISIT: These entries can be set in omap3evm_twl_data
+	 * after a merge with MFD tree
+	 */
+	omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1;
+	omap3stalker_twldata.vsim = &omap3stalker_vsim;
+
+	omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo,
+			      ARRAY_SIZE(omap3stalker_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
+			      ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
+	return 0;
+}
+
+#define OMAP3_STALKER_TS_GPIO	175
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_STALKER_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode		= 0,
+	.single_channel		= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3stalker_spi_board_info[] = {
+	[0] = {
+	       .modalias	= "ads7846",
+	       .bus_num		= 1,
+	       .chip_select	= 0,
+	       .max_speed_hz	= 1500000,
+	       .controller_data	= &ads7846_mcspi_config,
+	       .irq		= OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO),
+	       .platform_data	= &ads7846_config,
+	},
+};
+
+static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
+};
+
+static void __init omap3_stalker_init_irq(void)
+{
+	omap_board_config = omap3_stalker_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static struct platform_device *omap3_stalker_devices[] __initdata = {
+	&omap3_stalker_dss_device,
+	&keys_gpio,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset = true,
+	.reset_gpio_port[0] = -EINVAL,
+	.reset_gpio_port[1] = 21,
+	.reset_gpio_port[2] = -EINVAL,
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	{.reg_offset = OMAP_MUX_TERMINATOR},
+};
+#else
+#define board_mux	NULL
+#endif
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_OTG,
+	.power		= 100,
+};
+
+static void __init omap3_stalker_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+
+	omap3_stalker_i2c_init();
+
+	platform_add_devices(omap3_stalker_devices,
+			     ARRAY_SIZE(omap3_stalker_devices));
+
+	spi_register_board_info(omap3stalker_spi_board_info,
+				ARRAY_SIZE(omap3stalker_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
+	ads7846_dev_init();
+
+	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
+
+	omap3stalker_init_eth();
+	omap3_stalker_display_init();
+/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_stalker_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(SBC3530, "OMAP3 STALKER")
+	/* Maintainer: Jason Lam -lzg@ema-tech.com */
+	.phys_io		= 0x48000000,
+	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params		= 0x80000100,
+	.map_io			= omap3_stalker_map_io,
+	.init_irq		= omap3_stalker_init_irq,
+	.init_machine		= omap3_stalker_init,
+	.timer			= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index fe3d22c..2f5f823 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -50,7 +50,7 @@
 #include <plat/timer-gp.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #include <asm/setup.h>
 
@@ -122,7 +122,7 @@ static struct platform_device omap3touchbook_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 8,
@@ -161,7 +161,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	touchbook_vmmc1_supply.dev = mmc[0].dev;
@@ -328,8 +328,7 @@ static void __init omap3_ads7846_init(void)
 	}
 
 	gpio_direction_input(OMAP3_TS_GPIO);
-	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_TS_GPIO, 310);
 }
 
 static struct ads7846_platform_data ads7846_config = {
@@ -493,7 +492,7 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
@@ -518,14 +517,20 @@ static void omap3_touchbook_poweroff(void)
 	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
 }
 
-static void __init early_touchbook_revision(char **p)
+static int __init early_touchbook_revision(char *p)
 {
-	if (!*p)
-		return;
+	if (!p)
+		return 0;
 
-	strict_strtoul(*p, 10, &touchbook_revision);
+	return strict_strtoul(p, 10, &touchbook_revision);
 }
-__early_param("tbr=", early_touchbook_revision);
+early_param("tbr", early_touchbook_revision);
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
 
 static void __init omap3_touchbook_init(void)
 {
@@ -545,7 +550,7 @@ static void __init omap3_touchbook_init(void)
 	spi_register_board_info(omap3_ads7846_spi_board_info,
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3touchbook_flash_init();
 
@@ -557,7 +562,7 @@ static void __init omap3_touchbook_init(void)
 static void __init omap3_touchbook_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index d192dd9..79ac414 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -48,7 +48,7 @@
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
@@ -63,6 +63,8 @@
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
+#define OVERO_SMSC911X2_CS     4
+#define OVERO_SMSC911X2_GPIO   65
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = {
 	},
 };
 
+static struct resource overo_smsc911x2_resources[] = {
+	{
+		.name	= "smsc911x2-memory",
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
 static struct smsc911x_platform_config overo_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
@@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = {
 
 static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
-	.id		= -1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
 	.resource	= overo_smsc911x_resources,
 	.dev		= {
@@ -272,7 +284,7 @@ static void __init overo_flash_init(void)
 	}
 }
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -297,7 +309,7 @@ static struct regulator_consumer_supply overo_vmmc1_supply = {
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	overo_vmmc1_supply.dev = mmc[0].dev;
 
@@ -394,7 +406,7 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
@@ -413,6 +425,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -420,7 +438,7 @@ static void __init overo_init(void)
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
@@ -469,7 +487,7 @@ static void __init overo_init(void)
 static void __init overo_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acafdbc..0348392 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -34,7 +34,7 @@
 #include <plat/gpmc-smc91x.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -45,6 +45,8 @@
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
+	RX51_SPI_MIPID,		/* LCD panel */
+	RX51_SPI_TSC2005,	/* Touch Controller */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -54,6 +56,16 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -64,6 +76,22 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
+	[RX51_SPI_MIPID] = {
+		.modalias		= "acx565akm",
+		.bus_num		= 1,
+		.chip_select		= 2,
+		.max_speed_hz		= 6000000,
+		.controller_data	= &mipid_mcspi_config,
+	},
+	[RX51_SPI_TSC2005] = {
+		.modalias		= "tsc2005",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+		.max_speed_hz		= 6000000,
+		.controller_data	= &tsc2005_mcspi_config,
+		/* .platform_data = &tsc2005_config,*/
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -147,6 +175,10 @@ static void __init rx51_add_gpio_keys(void)
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -154,6 +186,7 @@ static int board_keymap[] = {
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -162,6 +195,7 @@ static int board_keymap[] = {
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -169,6 +203,8 @@ static int board_keymap[] = {
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -177,20 +213,23 @@ static int board_keymap[] = {
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
@@ -209,7 +248,47 @@ static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* Enable input logic and pull all lines up when eMMC is on. */
+static struct omap_board_mux rx51_mmc2_on_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/* Disable input logic and pull all lines down when eMMC is off. */
+static struct omap_board_mux rx51_mmc2_off_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Current flows to eMMC when eMMC is off and the data lines are pulled up,
+ * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
+ */
+static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+{
+	if (power_on)
+		omap_mux_write_array(rx51_mmc2_on_mux);
+	else
+		omap_mux_write_array(rx51_mmc2_off_mux);
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -222,25 +301,71 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.name		= "internal",
 		.mmc		= 2,
-		.wires		= 8,
+		.wires		= 8, /* See also rx51_mmc2_remux */
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
 		.power_saving	= true,
+		.remux		= rx51_mmc2_remux,
 	},
 	{}	/* Terminator */
 };
 
 static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply			= "vmmc",
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.0",
 };
 
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
-	.supply			= "vmmc",
+static struct regulator_consumer_supply rx51_vaux3_supply = {
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.1",
 };
 
 static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply			= "vmmc_aux",
+	.supply   = "vmmc_aux",
+	.dev_name = "mmci-omap-hs.1",
+};
+
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+	/* tlv320aic3x analog supplies */
+	{
+		.supply		= "AVDD",
+		.dev_name	= "2-0018",
+	},
+	{
+		.supply		= "DRVDD",
+		.dev_name	= "2-0018",
+	},
+	/* Keep vmmc as last item. It is not iterated for newer boards */
+	{
+		.supply		= "vmmc",
+		.dev_name	= "mmci-omap-hs.1",
+	},
+};
+
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+	/* tlv320aic3x digital supplies */
+	{
+		.supply		= "IOVDD",
+		.dev_name	= "2-0018"
+	},
+	{
+		.supply		= "DVDD",
+		.dev_name	= "2-0018"
+	},
+};
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+	{
+		.supply	= "vdds_sdi",
+		.dev	= &rx51_display_device.dev,
+	},
+#endif
 };
 
 static struct regulator_init_data rx51_vaux1 = {
@@ -253,6 +378,8 @@ static struct regulator_init_data rx51_vaux1 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
+	.consumer_supplies	= rx51_vaux1_consumers,
 };
 
 static struct regulator_init_data rx51_vaux2 = {
@@ -294,7 +421,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.consumer_supplies	= &rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -326,9 +453,9 @@ static struct regulator_init_data rx51_vmmc1 = {
 
 static struct regulator_init_data rx51_vmmc2 = {
 	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
+		.name			= "V28_A",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
@@ -336,8 +463,8 @@ static struct regulator_init_data rx51_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
+	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
 static struct regulator_init_data rx51_vsim = {
@@ -367,6 +494,20 @@ static struct regulator_init_data rx51_vdac = {
 	},
 };
 
+static struct regulator_init_data rx51_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
+	.consumer_supplies	= rx51_vio_supplies,
+};
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -375,12 +516,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 	gpio_request(gpio + 7, "speaker_en");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* set up MMC adapters, linking their regulators to them */
-	twl4030_mmc_init(mmc);
-	rx51_vmmc1_supply.dev = mmc[0].dev;
-	rx51_vmmc2_supply.dev = mmc[1].dev;
-	rx51_vsim_supply.dev = mmc[1].dev;
-
 	return 0;
 }
 
@@ -580,6 +715,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vio			= &rx51_vio,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
@@ -591,18 +727,27 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	},
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
 		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-	else {
+		/* Only older boards use VMMC2 for internal MMC */
+		rx51_vmmc2.num_consumer_supplies--;
+	} else {
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
+	rx51_twldata.vmmc2 = &rx51_vmmc2;
 	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
-			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
-	omap_register_i2c_bus(2, 100, NULL, 0);
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }
@@ -751,5 +896,6 @@ void __init rx51_peripherals_init(void)
 	rx51_init_wl1251();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
+	omap2_hsmmc_init(mmc);
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
new file mode 100644
index 0000000..b743a4f
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-video.c
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/mm.h>
+
+#include <asm/mach-types.h>
+#include <plat/mux.h>
+#include <plat/display.h>
+#include <plat/vram.h>
+#include <plat/mcspi.h>
+
+#include "mux.h"
+
+#define RX51_LCD_RESET_GPIO	90
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static int rx51_lcd_enable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void rx51_lcd_disable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device rx51_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "panel-acx565akm",
+	.type			= OMAP_DISPLAY_TYPE_SDI,
+	.phy.sdi.datapairs	= 2,
+	.reset_gpio		= RX51_LCD_RESET_GPIO,
+	.platform_enable	= rx51_lcd_enable,
+	.platform_disable	= rx51_lcd_disable,
+};
+
+static struct omap_dss_device *rx51_dss_devices[] = {
+	&rx51_lcd_device,
+};
+
+static struct omap_dss_board_info rx51_dss_board_info = {
+	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
+	.devices	= rx51_dss_devices,
+	.default_device	= &rx51_lcd_device,
+};
+
+struct platform_device rx51_display_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rx51_dss_board_info,
+	},
+};
+
+static struct platform_device *rx51_video_devices[] __initdata = {
+	&rx51_display_device,
+};
+
+static int __init rx51_video_init(void)
+{
+	if (!machine_is_nokia_rx51())
+		return 0;
+
+	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
+		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
+		return 0;
+	}
+
+	if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
+		return 0;
+	}
+
+	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
+
+	platform_add_devices(rx51_video_devices,
+				ARRAY_SIZE(rx51_video_devices));
+	return 0;
+}
+
+subsys_initcall(rx51_video_init);
+
+void __init rx51_video_mem_init(void)
+{
+	/*
+	 * GFX 864x480x32bpp
+	 * VID1/2 1280x720x32bpp double buffered
+	 */
+	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
+			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
+}
+
+#else
+void __init rx51_video_mem_init(void) { }
+#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 67bb347..1b86b5b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -30,8 +31,49 @@
 #include <plat/usb.h>
 
 #include "mux.h"
+#include "pm.h"
+
+#define RX51_GPIO_SLEEP_IND 162
 
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
+extern void rx51_video_mem_init(void);
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name	= "sleep_ind",
+		.gpio	= RX51_GPIO_SLEEP_IND,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct cpuidle_params rx51_cpuidle_params[] = {
+	/* C1 */
+	{1, 110, 162, 5},
+	/* C2 */
+	{1, 106, 180, 309},
+	/* C3 */
+	{0, 107, 410, 46057},
+	/* C4 */
+	{0, 121, 3374, 46057},
+	/* C5 */
+	{1, 855, 1146, 46057},
+	/* C6 */
+	{0, 7580, 4134, 484329},
+	/* C7 */
+	{1, 7505, 15274, 484329},
+};
 
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
@@ -62,6 +104,7 @@ static void __init rx51_init_irq(void)
 
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	sdrc_params = rx51_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
@@ -78,22 +121,31 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 0,
+};
+
 static void __init rx51_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+	platform_device_register(&leds_gpio);
 }
 
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	rx51_video_mem_init();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
new file mode 100644
index 0000000..2d02632
--- /dev/null
+++ b/arch/arm/mach-omap2/board-sdp-flash.c
@@ -0,0 +1,272 @@
+/*
+ * board-sdp-flash.c
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/onenand.h>
+#include <plat/tc.h>
+#include <mach/board-sdp.h>
+
+#define REG_FPGA_REV			0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
+#define MAX_SUPPORTED_GPMC_CONFIG	3
+
+#define DEBUG_BASE		0x08000000 /* debug board */
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
+#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
+
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ *
+ * REVISIT: Add support for 2430 SDP
+ */
+static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct physmap_flash_data sdp_nor_data = {
+	.width		= 2,
+};
+
+static struct resource sdp_nor_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+			.platform_data = &sdp_nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sdp_nor_resource,
+};
+
+static void
+__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
+{
+	int err;
+
+	sdp_nor_data.parts	= sdp_nor_parts.parts;
+	sdp_nor_data.nr_parts	= sdp_nor_parts.nr_parts;
+
+	/* Configure start address and size of NOR device */
+	if (omap_rev() >= OMAP3430_REV_ES1_0) {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
+				(unsigned long *)&sdp_nor_resource.start);
+		sdp_nor_resource.end = sdp_nor_resource.start
+					+ FLASH_SIZE_SDPV2 - 1;
+	} else {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
+				(unsigned long *)&sdp_nor_resource.start);
+		sdp_nor_resource.end = sdp_nor_resource.start
+					+ FLASH_SIZE_SDPV1 - 1;
+	}
+	if (err < 0) {
+		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+		return;
+	}
+	if (platform_device_register(&sdp_nor_device) < 0)
+		printk(KERN_ERR	"Unable to register NOR device\n");
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data = {
+	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
+};
+
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+	board_onenand_data.cs		= cs;
+	board_onenand_data.parts	= sdp_onenand_parts.parts;
+	board_onenand_data.nr_parts	= sdp_onenand_parts.nr_parts;
+
+	gpmc_onenand_init(&board_onenand_data);
+}
+#else
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+/* Note that all values in this struct are in nanoseconds */
+static struct gpmc_timings nand_timings = {
+
+	.sync_clk = 0,
+
+	.cs_on = 0,
+	.cs_rd_off = 36,
+	.cs_wr_off = 36,
+
+	.adv_on = 6,
+	.adv_rd_off = 24,
+	.adv_wr_off = 36,
+
+	.we_off = 30,
+	.oe_off = 48,
+
+	.access = 54,
+	.rd_cycle = 72,
+	.wr_cycle = 72,
+
+	.wr_access = 30,
+	.wr_data_mux_bus = 0,
+};
+
+static struct omap_nand_platform_data sdp_nand_data = {
+	.nand_setup	= NULL,
+	.gpmc_t		= &nand_timings,
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.dev_ready	= NULL,
+	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
+};
+
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+	sdp_nand_data.cs		= cs;
+	sdp_nand_data.parts		= sdp_nand_parts.parts;
+	sdp_nand_data.nr_parts		= sdp_nand_parts.nr_parts;
+
+	sdp_nand_data.gpmc_cs_baseaddr	= (void *)(OMAP34XX_GPMC_VIRT +
+							GPMC_CS0_BASE +
+							cs * GPMC_CS_SIZE);
+	sdp_nand_data.gpmc_baseaddr	 = (void *) (OMAP34XX_GPMC_VIRT);
+
+	gpmc_nand_init(&sdp_nand_data);
+}
+#else
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+	u8 cs = 0;
+	void __iomem *fpga_map_addr;
+
+	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+	if (!fpga_map_addr)
+		return -ENOMEM;
+
+	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+		/* we dont have an DEBUG FPGA??? */
+		/* Depend on #defines!! default to strata boot return param */
+		goto unmap;
+
+	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+
+	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+	if (omap_rev() >= OMAP3430_REV_ES1_0)
+		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+			((cs & 2) << 1) | ((cs & 1) << 3);
+	else
+		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+unmap:
+	iounmap(fpga_map_addr);
+	return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
+{
+	u8		cs = 0;
+	u8		norcs = GPMC_CS_NUM + 1;
+	u8		nandcs = GPMC_CS_NUM + 1;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8		idx;
+	unsigned char	*config_sel = NULL;
+
+	/* REVISIT: Is this return correct idx for 2430 SDP?
+	 * for which cs configuration matches for 2430 SDP?
+	 */
+	idx = get_gpmc0_type();
+	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+		return;
+	}
+	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+
+	while (cs < GPMC_CS_NUM) {
+		switch (config_sel[cs]) {
+		case PDC_NOR:
+			if (norcs > GPMC_CS_NUM)
+				norcs = cs;
+			break;
+		case PDC_NAND:
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+			break;
+		case PDC_ONENAND:
+			if (onenandcs > GPMC_CS_NUM)
+				onenandcs = cs;
+			break;
+		};
+		cs++;
+	}
+
+	if (norcs > GPMC_CS_NUM)
+		printk(KERN_INFO "NOR: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_nor_init(sdp_partition_info[0], norcs);
+
+	if (onenandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "OneNAND: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_onenand_init(sdp_partition_info[1], onenandcs);
+
+	if (nandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_nand_init(sdp_partition_info[2], nandcs);
+}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bb4018b..1d7f827 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -82,7 +82,7 @@ static inline void __init zoom_init_smsc911x(void)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase	= 0x10000000,
+		.mapbase	= ZOOM_UART_BASE,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
 		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
@@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= 3,
+	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 1e3dfb6..6b39849 100755..100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -24,7 +24,8 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
-#include "mmc-twl4030.h"
+#include "mux.h"
+#include "hsmmc.h"
 
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
@@ -150,7 +151,7 @@ static struct regulator_init_data zoom_vsim = {
 	.consumer_supplies      = &zoom_vsim_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -175,7 +176,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
@@ -263,9 +264,22 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static void enable_board_wakeup_source(void)
+{
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}
+
 void __init zoom_peripherals_init(void)
 {
 	omap_i2c_init();
-	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
+	enable_board_wakeup_source();
 }
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index bb87cf7..803ef14 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -87,12 +87,12 @@ static void __init omap_zoom2_init(void)
 static void __init omap_zoom2_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.phys_io	= ZOOM_UART_BASE,
+	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index a9fe918..3314704 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -20,14 +20,15 @@
 
 #include <plat/common.h>
 #include <plat/board.h>
+#include <plat/usb.h>
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
 static void __init omap_zoom_map_io(void)
 {
-	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap2_set_globals_36xx();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_config_kernel zoom_config[] __initdata = {
@@ -51,16 +52,29 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset		= true,
+	.reset_gpio_port[0]	= -EINVAL,
+	.reset_gpio_port[1]	= 64,
+	.reset_gpio_port[2]	= -EINVAL,
+};
+
 static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
+
+	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
+	usb_ehci_init(&ehci_pdata);
 }
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.phys_io	= ZOOM_UART_BASE,
+	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom_map_io,
 	.init_irq	= omap_zoom_init_irq,
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
new file mode 100644
index 0000000..66e01ac
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -0,0 +1,122 @@
+/*
+ * OMAP2xxx APLL clock control functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/prcm.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+void __iomem *cm_idlest_pll;
+
+/* Private functions */
+
+/* Enable an APLL if off */
+static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
+			     OMAP24XX_CM_IDLEST_VAL, clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+static int omap2_clk_apll96_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
+}
+
+static int omap2_clk_apll54_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
+}
+
+/* Stop APLL */
+static void omap2_clk_apll_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/* Public data */
+
+const struct clkops clkops_apll96 = {
+	.enable		= omap2_clk_apll96_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+const struct clkops clkops_apll54 = {
+	.enable		= omap2_clk_apll54_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+/* Public functions */
+
+u32 omap2xxx_get_apll_clkin(void)
+{
+	u32 aplls, srate = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		srate = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		srate = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		srate = 12000000;
+
+	return srate;
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
new file mode 100644
index 0000000..01904843
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -0,0 +1,173 @@
+/*
+ * DPLL + CORE_CLK composite clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX The DPLL and CORE clocks should be split into two separate clock
+ * types.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+{
+	long long core_clk;
+	u32 v;
+
+	core_clk = omap2_get_dpll_rate(clk);
+
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
+
+	return core_clk;
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
+{
+	return omap2xxx_clk_get_core_rate(clk);
+}
+
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpllcore_round_rate(rate);
+		if (valid_rate != rate)
+			return -EINVAL;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			return -EINVAL;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+	}
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
new file mode 100644
index 0000000..2167be8
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -0,0 +1,62 @@
+/*
+ * OMAP2xxx osc_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+	.enable		= omap2_enable_osc_ck,
+	.disable	= omap2_disable_osc_ck,
+};
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+	return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
+}
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
new file mode 100644
index 0000000..822b5a7
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -0,0 +1,50 @@
+/*
+ * OMAP2xxx sys_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+void __iomem *prcm_clksrc_ctrl;
+
+u32 omap2xxx_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(prcm_clksrc_ctrl);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / omap2xxx_get_sysclkdiv();
+}
+
+
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
new file mode 100644
index 0000000..aef6291
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -0,0 +1,246 @@
+/*
+ * OMAP2xxx DVFS virtual clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of this code should be replaceable by the upcoming OPP layer
+ * code.  However, some notion of "rate set" is probably still necessary
+ * for OMAP2xxx at least.  Rate sets should be generalized so they can be
+ * used for any OMAP chip, not just OMAP2xxx.  In particular, Richard Woodruff
+ * has in the past expressed a preference to use rate sets for OPP changes,
+ * rather than dynamically recalculating the clock tree, so if someone wants
+ * this badly enough to write the code to handle it, we should support it
+ * as an option.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
+{
+	return curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	const struct prcm_config *ptr;
+	long highest_rate;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sclk->rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	const struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sclk->rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
+ */
+static struct cpufreq_frequency_table *freq_table;
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	const struct prcm_config *prcm;
+	int i = 0;
+	int tbl_sz = 0;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sclk->rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		tbl_sz++;
+	}
+
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
+		return;
+	}
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sclk->rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	kfree(freq_table);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
new file mode 100644
index 0000000..b2b1e37
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -0,0 +1,121 @@
+/*
+ * OMAP34xx M2 divider clock code
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "clock34xx.h"
+#include "sdrc.h"
+
+#define CYCLES_PER_MHZ			1000000
+
+/*
+ * CORE DPLL (DPLL3) M2 divider rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	u32 unlock_dll = 0;
+	u32 c;
+	unsigned long validrate, sdrcrate, _mpurate;
+	struct omap_sdrc_params *sdrc_cs0;
+	struct omap_sdrc_params *sdrc_cs1;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	sdrcrate = sdrc_ick_p->rate;
+	if (rate > clk->rate)
+		sdrcrate <<= ((rate / clk->rate) >> 1);
+	else
+		sdrcrate >>= ((clk->rate / rate) >> 1);
+
+	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+	if (ret)
+		return -EINVAL;
+
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	/*
+	 * XXX This only needs to be done when the CPU frequency changes
+	 */
+	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+	c += 1;  /* for safety */
+	c *= SDRC_MPURATE_LOOPS;
+	c >>= SDRC_MPURATE_SCALE;
+	if (c == 0)
+		c = 1;
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC CS0 timing params used:"
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+	if (sdrc_cs1)
+		pr_debug("clock: SDRC CS1 timing params used: "
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+	if (sdrc_cs1)
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+	else
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  0, 0, 0, 0);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
new file mode 100644
index 0000000..a781cd6
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -0,0 +1,509 @@
+/*
+ * clkt_clksel.c - OMAP2/3/4 clksel clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * clksel clocks are clocks that do not have a fixed parent, or that
+ * can divide their parent's rate, or possibly both at the same time, based
+ * on the contents of a hardware register bitfield.
+ *
+ * All of the various mux and divider settings can be encoded into
+ * struct clksel* data structures, and then these can be autogenerated
+ * from some hardware database for each new chip generation.  This
+ * should avoid the need to write, review, and validate a lot of new
+ * clock code for each new chip, since it can be exported from the SoC
+ * design flow.  This is now done on OMAP4.
+ *
+ * The fusion of mux and divider clocks is a software creation.  In
+ * hardware reality, the multiplexer (parent selection) and the
+ * divider exist separately.  XXX At some point these clksel clocks
+ * should be split into "divider" clocks and "mux" clocks to better
+ * match the hardware.
+ *
+ * (The name "clksel" comes from the name of the corresponding
+ * register field in the OMAP2/3 family of SoCs.)
+ *
+ * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
+ * many of the OMAP1 clocks should be convertible to use this
+ * mechanism.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+
+/* Private functions */
+
+/**
+ * _get_clksel_by_parent() - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
+ */
+static const struct clksel *_get_clksel_by_parent(struct clk *clk,
+						  struct clk *src_clk)
+{
+	const struct clksel *clks;
+
+	for (clks = clk->clksel; clks->parent; clks++)
+		if (clks->parent == src_clk)
+			break; /* Found the requested parent */
+
+	if (!clks->parent) {
+		/* This indicates a data problem */
+		WARN(1, "clock: Could not find parent clock %s in clksel array "
+		     "of clock %s\n", src_clk->name, clk->name);
+		return NULL;
+	}
+
+	return clks;
+}
+
+/**
+ * _get_div_and_fieldval() - find the new clksel divisor and field value to use
+ * @src_clk: planned new parent struct clk *
+ * @clk: struct clk * that is being reparented
+ * @field_val: pointer to a u32 to contain the register data for the divisor
+ *
+ * Given an intended new parent struct clk * @src_clk, and the struct
+ * clk * @clk to the clock that is being reparented, find the
+ * appropriate rate divisor for the new clock (returned as the return
+ * value), and the corresponding register bitfield data to program to
+ * reach that divisor (returned in the u32 pointed to by @field_val).
+ * Returns 0 on error, or returns the newly-selected divisor upon
+ * success (in this latter case, the corresponding register bitfield
+ * value is passed back in the variable pointed to by @field_val)
+ */
+static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
+				u32 *field_val)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr, *max_clkr;
+	u8 max_div = 0;
+
+	clks = _get_clksel_by_parent(clk, src_clk);
+	if (!clks)
+		return 0;
+
+	/*
+	 * Find the highest divisor (e.g., the one resulting in the
+	 * lowest rate) to use as the default.  This should avoid
+	 * clock rates that are too high for the device.  XXX A better
+	 * solution here would be to try to determine if there is a
+	 * divisor matching the original clock rate before the parent
+	 * switch, and if it cannot be found, to fall back to the
+	 * highest divisor.
+	 */
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		if (clkr->div > max_div) {
+			max_div = clkr->div;
+			max_clkr = clkr;
+		}
+	}
+
+	if (max_div == 0) {
+		/* This indicates an error in the clksel data */
+		WARN(1, "clock: Could not find divisor for clock %s parent %s"
+		     "\n", clk->name, src_clk->parent->name);
+		return 0;
+	}
+
+	*field_val = max_clkr->val;
+
+	return max_div;
+}
+
+/**
+ * _write_clksel_reg() - program a clock's clksel register in hardware
+ * @clk: struct clk * to program
+ * @v: clksel bitfield value to program (with LSB at bit 0)
+ *
+ * Shift the clksel register bitfield value @v to its appropriate
+ * location in the clksel register and write it in.  This function
+ * will ensure that the write to the clksel_reg reaches its
+ * destination before returning -- important since PRM and CM register
+ * accesses can be quite slow compared to ARM cycles -- but does not
+ * take into account any time the hardware might take to switch the
+ * clock source.
+ */
+static void _write_clksel_reg(struct clk *clk, u32 field_val)
+{
+	u32 v;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
+
+	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+}
+
+/**
+ * _clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error or returns the actual integer divisor
+ * upon success.
+ */
+static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+
+	clks = _get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return 0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		if (clkr->val == field_val)
+			break;
+	}
+
+	if (!clkr->div) {
+		/* This indicates a data error */
+		WARN(1, "clock: Could not find fieldval %d for clock %s parent "
+		     "%s\n", field_val, clk->name, clk->parent->name);
+		return 0;
+	}
+
+	return clkr->div;
+}
+
+/**
+ * _divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock
+ * divisor, find the corresponding register field value.  Returns the
+ * register field value _before_ left-shifting (i.e., LSB is at bit
+ * 0); or returns 0xFFFFFFFF (~0) upon error.
+ */
+static u32 _divisor_to_clksel(struct clk *clk, u32 div)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+
+	/* should never happen */
+	WARN_ON(div == 0);
+
+	clks = _get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		if (clkr->div == div)
+			break;
+	}
+
+	if (!clkr->div) {
+		pr_err("clock: Could not find divisor %d for clock %s parent "
+		       "%s\n", div, clk->name, clk->parent->name);
+		return ~0;
+	}
+
+	return clkr->val;
+}
+
+/**
+ * _read_divisor() - get current divisor applied to parent clock (from hdwr)
+ * @clk: OMAP struct clk to use.
+ *
+ * Read the current divisor register value for @clk that is programmed
+ * into the hardware, convert it into the actual divisor value, and
+ * return it; or return 0 on error.
+ */
+static u32 _read_divisor(struct clk *clk)
+{
+	u32 v;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return 0;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= clk->clksel_mask;
+	v >>= __ffs(clk->clksel_mask);
+
+	return _clksel_to_divisor(clk, v);
+}
+
+/* Public functions */
+
+/**
+ * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
+ *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates.  The divider array must be sorted with smallest divider first.
+ * This function is also used by the DPLL3 M2 divider code.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div)
+{
+	unsigned long test_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 last_div = 0;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return ~0;
+
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
+
+	*new_div = 1;
+
+	clks = _get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		/* Sanity check */
+		if (clkr->div <= last_div)
+			pr_err("clock: clksel_rate table not sorted "
+			       "for clock %s", clk->name);
+
+		last_div = clkr->div;
+
+		test_rate = clk->parent->rate / clkr->div;
+
+		if (test_rate <= target_rate)
+			break; /* found it */
+	}
+
+	if (!clkr->div) {
+		pr_err("clock: Could not find divisor for target "
+		       "rate %ld for clock %s parent %s\n", target_rate,
+		       clk->name, clk->parent->name);
+		return ~0;
+	}
+
+	*new_div = clkr->div;
+
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
+
+	return clk->parent->rate / clkr->div;
+}
+
+/*
+ * Clocktype interface functions to the OMAP clock code
+ * (i.e., those used in struct clk field function pointers, etc.)
+ */
+
+/**
+ * omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer @clk to a source-selectable struct clk, read the
+ * hardware register and determine what its parent is currently set
+ * to.  Update @clk's .parent field with the appropriate clk ptr.  No
+ * return value.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 r, found = 0;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return;
+
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
+
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if (!(clkr->flags & cpu_mask))
+				continue;
+
+			if (clkr->val == r) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk_reparent(clk, clks->parent);
+				};
+				found = 1;
+			}
+		}
+	}
+
+	/* This indicates a data error */
+	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
+	     clk->name, r);
+
+	return;
+}
+
+/**
+ * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
+ * @clk: struct clk *
+ *
+ * This function is intended to be called only by the clock framework.
+ * Each clksel clock should have its struct clk .recalc field set to this
+ * function.  Returns the clock's current rate, based on its parent's rate
+ * and its current divisor setting in the hardware.
+ */
+unsigned long omap2_clksel_recalc(struct clk *clk)
+{
+	unsigned long rate;
+	u32 div = 0;
+
+	div = _read_divisor(clk);
+	if (div == 0)
+		return clk->rate;
+
+	rate = clk->parent->rate / div;
+
+	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
+		 rate, div);
+
+	return rate;
+}
+
+/**
+ * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * This function is intended to be called only by the clock framework.
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	u32 new_div;
+
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
+
+/**
+ * omap2_clksel_set_rate() - program clock rate in hardware
+ * @clk: struct clk * to program rate
+ * @rate: target rate to program
+ *
+ * This function is intended to be called only by the clock framework.
+ * Program @clk's rate to @rate in the hardware.  The clock can be
+ * either enabled or disabled when this happens, although if the clock
+ * is enabled, some downstream devices may glitch or behave
+ * unpredictably when the clock rate is changed - this depends on the
+ * hardware. This function does not currently check the usecount of
+ * the clock, so if multiple drivers are using the clock, and the rate
+ * is changed, they will all be affected without any notification.
+ * Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 field_val, validrate, new_div = 0;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return -EINVAL;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	field_val = _divisor_to_clksel(clk, new_div);
+	if (field_val == ~0)
+		return -EINVAL;
+
+	_write_clksel_reg(clk, field_val);
+
+	clk->rate = clk->parent->rate / new_div;
+
+	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+
+	return 0;
+}
+
+/*
+ * Clksel parent setting function - not passed in struct clk function
+ * pointer - instead, the OMAP clock code currently assumes that any
+ * parent-setting clock is a clksel clock, and calls
+ * omap2_clksel_set_parent() by default
+ */
+
+/**
+ * omap2_clksel_set_parent() - change a clock's parent clock
+ * @clk: struct clk * of the child clock
+ * @new_parent: struct clk * of the new parent clock
+ *
+ * This function is intended to be called only by the clock framework.
+ * Change the parent clock of clock @clk to @new_parent.  This is
+ * intended to be used while @clk is disabled.  This function does not
+ * currently check the usecount of the clock, so if multiple drivers
+ * are using the clock, and the parent is changed, they will all be
+ * affected without any notification.  Returns -EINVAL upon error, or
+ * 0 upon success.
+ */
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
+{
+	u32 field_val = 0;
+	u32 parent_div;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return -EINVAL;
+
+	parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
+	if (!parent_div)
+		return -EINVAL;
+
+	_write_clksel_reg(clk, field_val);
+
+	clk_reparent(clk, new_parent);
+
+	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
+	clk->rate = new_parent->rate;
+
+	if (parent_div > 0)
+		clk->rate /= parent_div;
+
+	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
+		 clk->name, clk->parent->name, clk->rate);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
new file mode 100644
index 0000000..6ce512e
--- /dev/null
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -0,0 +1,386 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		2
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		-1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN		750000
+#define DPLL_FINT_BAND1_MAX		2100000
+#define DPLL_FINT_BAND2_MIN		7500000
+#define DPLL_FINT_BAND2_MAX		21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+	struct dpll_data *dd;
+	long fint;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = clk->parent->rate / (n + 1);
+	if (fint < DPLL_FINT_BAND1_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "lowering max_divider\n", n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+
+	} else if (fint > DPLL_FINT_BAND1_MAX &&
+		   fint < DPLL_FINT_BAND2_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+
+	} else if (fint > DPLL_FINT_BAND2_MAX) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "boosting min_divider\n", n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+
+	}
+
+	return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int r = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		r = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return r;
+}
+
+/* Public functions */
+
+void omap2_init_dpll_parent(struct clk *clk)
+{
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent in case the dpll is in bypass */
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	}
+	return;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+u32 omap2_get_dpll_rate(struct clk *clk)
+{
+	long long dpll_clk;
+	u32 dpll_mult, dpll_div, v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return 0;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = v & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
+
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	do_div(dpll_clk, dpll_div + 1);
+
+	return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	clk->dpll_data->rate_tolerance = tolerance;
+
+	return 0;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	int m, n, r, e, scaled_max_m;
+	unsigned long scaled_rt_rp, new_rate;
+	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	dd = clk->dpll_data;
+
+	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+		 "%ld\n", clk->name, target_rate);
+
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+	dd->last_rounded_rate = 0;
+
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (m > scaled_max_m)
+			break;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    dd->clk_ref->rate);
+
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
+
+		e = target_rate - new_rate;
+		pr_debug("clock: n = %d: m = %d: rate error is %d "
+			 "(new_rate = %ld)\n", n, m, e, new_rate);
+
+		if (min_e == -1 ||
+		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
+			min_e = e;
+			min_e_m = m;
+			min_e_n = n;
+
+			pr_debug("clock: found new least error %d\n", min_e);
+
+			/* We found good settings -- bail out now */
+			if (min_e <= dd->rate_tolerance)
+				break;
+		}
+	}
+
+	if (min_e < 0) {
+		pr_debug("clock: error: target rate or tolerance too low\n");
+		return ~0;
+	}
+
+	dd->last_rounded_m = min_e_m;
+	dd->last_rounded_n = min_e_n;
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+						       min_e_m,  min_e_n);
+
+	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+		 min_e, min_e_m, min_e_n);
+	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+		 dd->last_rounded_rate, target_rate);
+
+	return dd->last_rounded_rate;
+}
+
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 759c72a..605f531 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-omap2/clock.c
  *
  *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2004-2010 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -14,11 +14,10 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -28,10 +27,7 @@
 #include <plat/clockdomain.h>
 #include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <asm/div64.h>
 
-#include <plat/sdrc.h>
-#include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -39,140 +35,44 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER		1
-#define DPLL_MIN_DIVIDER		1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		-1
+u8 cpu_mask;
 
 /*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
+ * OMAP2+ specific clock functions
  */
-#define DPLL_SCALE_FACTOR		64
-#define DPLL_SCALE_BASE			2
-#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
-					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN		750000
-#define DPLL_FINT_BAND1_MAX		2100000
-#define DPLL_FINT_BAND2_MIN		7500000
-#define DPLL_FINT_BAND2_MAX		21000000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW		-1
-#define DPLL_FINT_INVALID		-2
-
-u8 cpu_mask;
-
-/*-------------------------------------------------------------------------
- * OMAP2/3/4 specific clock functions
- *-------------------------------------------------------------------------*/
-
-void omap2_init_dpll_parent(struct clk *clk)
-{
-	u32 v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return;
 
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* Reparent in case the dpll is in bypass */
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	}
-	return;
-}
+/* Private functions */
 
 /**
- * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
- * @clk: struct clk *
- *
- * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
- * don't take effect until the VALID_CONFIG bit is written, write the
- * VALID_CONFIG bit and wait for the write to complete.  No return value.
- */
-static void _omap2xxx_clk_commit(struct clk *clk)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	if (!(clk->flags & DELAYED_APP))
-		return;
-
-	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-}
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
  *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
  */
-static int _dpll_test_fint(struct clk *clk, u8 n)
+static void _omap2_module_wait_ready(struct clk *clk)
 {
-	struct dpll_data *dd;
-	long fint;
-	int ret = 0;
-
-	dd = clk->dpll_data;
-
-	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / (n + 1);
-	if (fint < DPLL_FINT_BAND1_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
-		dd->max_divider = n;
-		ret = DPLL_FINT_UNDERFLOW;
-
-	} else if (fint > DPLL_FINT_BAND1_MAX &&
-		   fint < DPLL_FINT_BAND2_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-
-	} else if (fint > DPLL_FINT_BAND2_MAX) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
-		dd->min_divider = n;
-		ret = DPLL_FINT_INVALID;
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit, idlest_val;
 
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
 	}
 
-	return ret;
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
+			     clk->name);
 }
 
+/* Public functions */
+
 /**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
@@ -181,7 +81,6 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
  * clockdomain pointer, and save it into the struct clk.  Intended to be
  * called during clk_register().  No return value.
  */
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
@@ -199,117 +98,6 @@ void omap2_init_clk_clkdm(struct clk *clk)
 			 "clkdm %s\n", clk->name, clk->clkdm_name);
 	}
 }
-#endif
-
-/**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
- *
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to.  Update the
- * clk->parent field with the appropriate clk ptr.
- */
-void omap2_init_clksel_parent(struct clk *clk)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-
-	if (!clk->clksel)
-		return;
-
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
-					clk_reparent(clk, clks->parent);
-				};
-				found = 1;
-			}
-		}
-	}
-
-	if (!found)
-		printk(KERN_ERR "clock: init parent: could not find "
-		       "regval %0x for clock %s\n", r,  clk->name);
-
-	return;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values.  When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-u32 omap2_get_dpll_rate(struct clk *clk)
-{
-	long long dpll_clk;
-	u32 dpll_mult, dpll_div, v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return 0;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
-	}
-
-	v = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = v & dd->mult_mask;
-	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = v & dd->div1_mask;
-	dpll_div >>= __ffs(dd->div1_mask);
-
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
-	do_div(dpll_clk, dpll_div + 1);
-
-	return dpll_clk;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
-{
-	WARN_ON(!clk->fixed_div);
-
-	return clk->parent->rate / clk->fixed_div;
-}
 
 /**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
@@ -351,7 +139,8 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
  * @clk: struct clk * to find IDLEST info for
  * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
  *
  * Return the CM_IDLEST register address and bit shift corresponding
  * to the module that "owns" this clock.  This default code assumes
@@ -361,40 +150,26 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit)
+				u8 *idlest_bit, u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = clk->enable_bit;
-}
 
-/**
- * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void omap2_module_wait_ready(struct clk *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 * AM35xx uses both, depending on the module.
+	 */
+	if (cpu_is_omap24xx())
+		*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+	else if (cpu_is_omap34xx())
+		*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+	else
+		BUG();
 
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
 }
 
 int omap2_dflt_clk_enable(struct clk *clk)
@@ -416,7 +191,7 @@ int omap2_dflt_clk_enable(struct clk *clk)
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops->find_idlest)
-		omap2_module_wait_ready(clk);
+		_omap2_module_wait_ready(clk);
 
 	return 0;
 }
@@ -456,337 +231,118 @@ const struct clkops clkops_omap2_dflt = {
 	.disable	= omap2_dflt_clk_disable,
 };
 
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
+/**
+ * omap2_clk_disable - disable a clock, if the system is not using it
+ * @clk: struct clk * to disable
+ *
+ * Decrements the usecount on struct clk @clk.  If there are no users
+ * left, call the clkops-specific clock disable function to disable it
+ * in hardware.  If the clock is part of a clockdomain (which they all
+ * should be), request that the clockdomain be disabled.  (It too has
+ * a usecount, and so will not be disabled in the hardware until it no
+ * longer has any users.)  If the clock has a parent clock (most of
+ * them do), then call ourselves, recursing on the parent clock.  This
+ * can cause an entire branch of the clock tree to be powered off by
+ * simply disabling one clock.  Intended to be called with the clockfw_lock
+ * spinlock held.  No return value.
  */
-static int _omap2_clk_enable(struct clk *clk)
-{
-	return clk->ops->enable(clk);
-}
-
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
-	clk->ops->disable(clk);
-}
-
 void omap2_clk_disable(struct clk *clk)
 {
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (clk->parent)
-			omap2_clk_disable(clk->parent);
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
-		if (clk->clkdm)
-			omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
-
+	if (clk->usecount == 0) {
+		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
+		     "already 0?", clk->name);
+		return;
 	}
-}
 
-int omap2_clk_enable(struct clk *clk)
-{
-	int ret = 0;
+	pr_debug("clock: %s: decrementing usecount\n", clk->name);
 
-	if (clk->usecount++ == 0) {
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
-		if (clk->clkdm)
-			omap2_clkdm_clk_enable(clk->clkdm, clk);
-#endif
+	clk->usecount--;
 
-		if (clk->parent) {
-			ret = omap2_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-		}
+	if (clk->usecount > 0)
+		return;
 
-		ret = _omap2_clk_enable(clk);
-		if (ret) {
-			if (clk->parent)
-				omap2_clk_disable(clk->parent);
+	pr_debug("clock: %s: disabling in hardware\n", clk->name);
 
-			goto err;
-		}
-	}
-	return ret;
+	clk->ops->disable(clk);
 
-err:
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 	if (clk->clkdm)
 		omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
-	clk->usecount--;
-	return ret;
-}
-
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
- */
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
-	unsigned long rate;
-	u32 div = 0;
-
-	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
-
-	div = omap2_clksel_get_divisor(clk);
-	if (div == 0)
-		return clk->rate;
-
-	rate = clk->parent->rate / div;
-
-	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
-						       struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	if (!clk->clksel)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++) {
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-	}
-
-	if (!clks->parent) {
-		printk(KERN_ERR "clock: Could not find parent clock %s in "
-		       "clksel array of clock %s\n", src_clk->name,
-		       clk->name);
-		return NULL;
-	}
 
-	return clks;
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
 }
 
 /**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
+ * omap2_clk_enable - request that the system enable a clock
+ * @clk: struct clk * to enable
  *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
+ * Increments the usecount on struct clk @clk.  If there were no users
+ * previously, then recurse up the clock tree, enabling all of the
+ * clock's parents and all of the parent clockdomains, and finally,
+ * enabling @clk's clockdomain, and @clk itself.  Intended to be
+ * called with the clockfw_lock spinlock held.  Returns 0 upon success
+ * or a negative error code upon failure.
  */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-				u32 *new_div)
+int omap2_clk_enable(struct clk *clk)
 {
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
-
-	*new_div = 1;
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
+	int ret;
 
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-		    continue;
+	pr_debug("clock: %s: incrementing usecount\n", clk->name);
 
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
+	clk->usecount++;
 
-		last_div = clkr->div;
+	if (clk->usecount > 1)
+		return 0;
 
-		test_rate = clk->parent->rate / clkr->div;
+	pr_debug("clock: %s: enabling in hardware\n", clk->name);
 
-		if (test_rate <= target_rate)
-			break; /* found it */
+	if (clk->parent) {
+		ret = omap2_clk_enable(clk->parent);
+		if (ret) {
+			WARN(1, "clock: %s: could not enable parent %s: %d\n",
+			     clk->name, clk->parent->name, ret);
+			goto oce_err1;
+		}
 	}
 
-	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
-		return ~0;
+	if (clk->clkdm) {
+		ret = omap2_clkdm_clk_enable(clk->clkdm, clk);
+		if (ret) {
+			WARN(1, "clock: %s: could not enable clockdomain %s: "
+			     "%d\n", clk->name, clk->clkdm->name, ret);
+			goto oce_err2;
+		}
 	}
 
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
+	ret = clk->ops->enable(clk);
+	if (ret) {
+		WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret);
+		goto oce_err3;
+	}
 
-	return (clk->parent->rate / clkr->div);
-}
+	return 0;
 
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 new_div;
+oce_err3:
+	if (clk->clkdm)
+		omap2_clkdm_clk_disable(clk->clkdm, clk);
+oce_err2:
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
+oce_err1:
+	clk->usecount--;
 
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+	return ret;
 }
 
-
 /* Given a clock and a rate apply a clock specific rounding function */
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->round_rate)
 		return clk->round_rate(clk, rate);
 
-	if (clk->flags & RATE_FIXED)
-		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
-		       "on fixed-rate clock %s\n", clk->name);
-
 	return clk->rate;
 }
 
-/**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error
- */
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
-			break;
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find fieldval %d for "
-		       "clock %s parent %s\n", field_val, clk->name,
-		       clk->parent->name);
-		return 0;
-	}
-
-	return clkr->div;
-}
-
-/**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns ~0 on error
- */
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->div == div))
-			break;
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor %d for "
-		       "clock %s parent %s\n", div, clk->name,
-		       clk->parent->name);
-		return ~0;
-	}
-
-	return clkr->val;
-}
-
-/**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
- *
- * Returns the integer divisor upon success or 0 on error.
- */
-u32 omap2_clksel_get_divisor(struct clk *clk)
-{
-	u32 v;
-
-	if (!clk->clksel_mask)
-		return 0;
-
-	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return omap2_clksel_to_divisor(clk, v);
-}
-
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 v, field_val, validrate, new_div = 0;
-
-	if (!clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = omap2_divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-
-	clk->rate = clk->parent->rate / new_div;
-
-	_omap2xxx_clk_commit(clk);
-
-	return 0;
-}
-
-
 /* Set the clock rate for a clock source */
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
@@ -794,11 +350,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
-	   rate table mechanism, driven by mpu_speed  */
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
@@ -806,289 +357,152 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
- */
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
-				       u32 *field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = omap2_get_clksel_by_parent(clk, src_clk);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
-			break; /* Found the default rate for this platform */
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find default rate for "
-		       "clock %s parent %s\n", clk->name,
-		       src_clk->parent->name);
-		return 0;
-	}
-
-	/* Should never happen.  Add a clksel mask to the struct clk. */
-	WARN_ON(clk->clksel_mask == 0);
-
-	*field_val = clkr->val;
-
-	return clkr->div;
-}
-
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 field_val, v, parent_div;
-
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	if (!clk->clksel)
 		return -EINVAL;
 
-	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
-	if (!parent_div)
-		return -EINVAL;
-
-	/* Set new source value (previous dividers if any in effect) */
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
-
-	_omap2xxx_clk_commit(clk);
-
-	clk_reparent(clk, new_parent);
-
-	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
-
-	if (parent_div > 0)
-		clk->rate /= parent_div;
-
-	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
+	if (clk->parent == new_parent)
+		return 0;
 
-	return 0;
+	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* DPLL rate rounding code */
+/* OMAP3/4 non-CORE DPLL clkops */
 
-/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm.  The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm).  So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	clk->dpll_data->rate_tolerance = tolerance;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 
-	return 0;
-}
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+};
 
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
-					    unsigned int m, unsigned int n)
-{
-	unsigned long long num;
+#endif
 
-	num = (unsigned long long)parent_rate * m;
-	do_div(num, n);
-	return num;
-}
 
 /*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL.  Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
- * a non-scaled m upon return.  This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
+ * OMAP2+ clock reset and init functions
  */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
-			   unsigned long target_rate,
-			   unsigned long parent_rate)
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk)
 {
-	int r = 0, carry = 0;
+	u32 regval32, v;
 
-	/* Unscale m and round if necessary */
-	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
-		carry = 1;
-	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
 
-	/*
-	 * The new rate must be <= the target rate to avoid programming
-	 * a rate that is impossible for the hardware to handle
-	 */
-	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-	if (*new_rate > target_rate) {
-		(*m)--;
-		*new_rate = 0;
-	}
+	regval32 = __raw_readl(clk->enable_reg);
+	if ((regval32 & (1 << clk->enable_bit)) == v)
+		return;
 
-	/* Guard against m underflow */
-	if (*m < DPLL_MIN_MULTIPLIER) {
-		*m = DPLL_MIN_MULTIPLIER;
-		*new_rate = 0;
-		r = DPLL_MULT_UNDERFLOW;
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
+	if (cpu_is_omap34xx()) {
+		omap2_clk_enable(clk);
+		omap2_clk_disable(clk);
+	} else {
+		clk->ops->disable(clk);
 	}
-
-	if (*new_rate == 0)
-		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
-	return r;
+	if (clk->clkdm != NULL)
+		pwrdm_clkdm_state_switch(clk->clkdm);
 }
+#endif
 
 /**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
+ * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
+ * @mpurate_ck_name: clk name of the clock to change rate
  *
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called.  Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption.  Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again.  Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
+ * Change the ARM MPU clock rate to the rate specified on the command
+ * line, if one was specified.  @mpurate_ck_name should be
+ * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
+ * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
+ * handled by the virt_prcm_set clock, but this should be handled by
+ * the OPP layer.  XXX This is intended to be handled by the OPP layer
+ * code in the near future and should be removed from the clock code.
+ * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
+ * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
+ * cannot be found, or 0 upon success.
  */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
 {
-	int m, n, r, e, scaled_max_m;
-	unsigned long scaled_rt_rp, new_rate;
-	int min_e = -1, min_e_m = -1, min_e_n = -1;
-	struct dpll_data *dd;
+	struct clk *mpurate_ck;
+	int r;
 
-	if (!clk || !clk->dpll_data)
-		return ~0;
-
-	dd = clk->dpll_data;
-
-	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
-		 "%ld\n", clk->name, target_rate);
-
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
-	dd->last_rounded_rate = 0;
-
-	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
-		/* Is the (input clk, divider) pair valid for the DPLL? */
-		r = _dpll_test_fint(clk, n);
-		if (r == DPLL_FINT_UNDERFLOW)
-			break;
-		else if (r == DPLL_FINT_INVALID)
-			continue;
-
-		/* Compute the scaled DPLL multiplier, based on the divider */
-		m = scaled_rt_rp * n;
-
-		/*
-		 * Since we're counting n up, a m overflow means we
-		 * can bail out completely (since as n increases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (m > scaled_max_m)
-			break;
-
-		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
-
-		/* m can't be set low enough for this n - try with a larger n */
-		if (r == DPLL_MULT_UNDERFLOW)
-			continue;
-
-		e = target_rate - new_rate;
-		pr_debug("clock: n = %d: m = %d: rate error is %d "
-			 "(new_rate = %ld)\n", n, m, e, new_rate);
-
-		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
-			min_e = e;
-			min_e_m = m;
-			min_e_n = n;
-
-			pr_debug("clock: found new least error %d\n", min_e);
+	if (!mpurate)
+		return -EINVAL;
 
-			/* We found good settings -- bail out now */
-			if (min_e <= dd->rate_tolerance)
-				break;
-		}
-	}
+	mpurate_ck = clk_get(NULL, mpurate_ck_name);
+	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
+		return -ENOENT;
 
-	if (min_e < 0) {
-		pr_debug("clock: error: target rate or tolerance too low\n");
-		return ~0;
+	r = clk_set_rate(mpurate_ck, mpurate);
+	if (IS_ERR_VALUE(r)) {
+		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
+		     mpurate_ck->name, mpurate, r);
+		return -EINVAL;
 	}
 
-	dd->last_rounded_m = min_e_m;
-	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
-						       min_e_m,  min_e_n);
+	calibrate_delay();
+	recalculate_root_clocks();
 
-	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
-		 min_e, min_e_m, min_e_n);
-	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 dd->last_rounded_rate, target_rate);
+	clk_put(mpurate_ck);
 
-	return dd->last_rounded_rate;
+	return 0;
 }
 
-/*-------------------------------------------------------------------------
- * Omap2 clock reset and init functions
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-void omap2_clk_disable_unused(struct clk *clk)
+/**
+ * omap2_clk_print_new_rates - print summary of current clock tree rates
+ * @hfclkin_ck_name: clk name for the off-chip HF oscillator
+ * @core_ck_name: clk name for the on-chip CORE_CLK
+ * @mpu_ck_name: clk name for the ARM MPU clock
+ *
+ * Prints a short message to the console with the HFCLKIN oscillator
+ * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
+ * Called by the boot-time MPU rate switching code.   XXX This is intended
+ * to be handled by the OPP layer code in the near future and should be
+ * removed from the clock code.  No return value.
+ */
+void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+				      const char *core_ck_name,
+				      const char *mpu_ck_name)
 {
-	u32 regval32, v;
+	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
+	unsigned long hfclkin_rate;
 
-	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
+	mpu_ck = clk_get(NULL, mpu_ck_name);
+	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
+		return;
 
-	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == v)
+	core_ck = clk_get(NULL, core_ck_name);
+	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
 		return;
 
-	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
-	if (cpu_is_omap34xx()) {
-		omap2_clk_enable(clk);
-		omap2_clk_disable(clk);
-	} else
-		_omap2_clk_disable(clk);
-	if (clk->clkdm != NULL)
-		pwrdm_clkdm_state_switch(clk->clkdm);
-}
+	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
+	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
+		return;
+
+	hfclkin_rate = clk_get_rate(hfclkin_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(hfclkin_rate / 1000000),
+		((hfclkin_rate / 100000) % 10),
+		(clk_get_rate(core_ck) / 1000000),
+		(clk_get_rate(mpu_ck) / 1000000));
+}
+
+/* Common data */
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+	/* These will be removed when the OPP code is integrated */
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
 #endif
+};
+
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 93c48df..a535c7a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -47,7 +47,10 @@
 #define DPLL_LOW_POWER_BYPASS	0x5
 #define DPLL_LOCKED		0x7
 
-int omap2_clk_init(void);
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+#define DPLL_NO_DCO_SEL		0x2
+
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -70,31 +73,62 @@ void omap2_clk_disable_unused(struct clk *clk);
 #define omap2_clk_disable_unused	NULL
 #endif
 
-unsigned long omap2_clksel_recalc(struct clk *clk);
 void omap2_init_clk_clkdm(struct clk *clk);
-void omap2_init_clksel_parent(struct clk *clk);
-u32 omap2_clksel_get_divisor(struct clk *clk);
+
+/* clkt_clksel.c public functions */
 u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 				u32 *new_div);
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
+void omap2_init_clksel_parent(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
+
 u32 omap2_get_dpll_rate(struct clk *clk);
 void omap2_init_dpll_parent(struct clk *clk);
+
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-void omap2_clk_prepare_for_reboot(void);
+
+
+#ifdef CONFIG_ARCH_OMAP2
+void omap2xxx_clk_prepare_for_reboot(void);
+#else
+static inline void omap2xxx_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_clk_prepare_for_reboot(void);
+#else
+static inline void omap3_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+void omap4_clk_prepare_for_reboot(void);
+#else
+static inline void omap4_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
 int omap2_dflt_clk_enable(struct clk *clk);
 void omap2_dflt_clk_disable(struct clk *clk);
 void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
 				   u8 *other_bit);
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit);
+				u8 *idlest_bit, u8 *idlest_val);
+int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
+void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+			       const char *core_ck_name,
+			       const char *mpu_ck_name);
 
 extern u8 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
@@ -104,5 +138,14 @@ extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
+extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
+#else
+#define omap2_clk_init_cpufreq_table	0
+#define omap2_clk_exit_cpufreq_table	0
+#endif
+
+extern const struct clkops clkops_omap3_noncore_dpll_ops;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
new file mode 100644
index 0000000..37d65d6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -0,0 +1,1911 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock2420_data.c
+ *
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2010 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+#define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
+
+/*
+ * 2420 clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ */
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+static struct clk secure_32k_ck = {
+	.name		= "secure_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.ops		= &clkops_oscck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* Without modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.ops		= &clkops_null,
+	.parent		= &osc_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2xxx_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.ops		= &clkops_null,
+	.rate		= 54000000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
+	.max_multiplier		= 1023,
+	.min_divider		= 1,
+	.max_divider		= 16,
+	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_dpllcore_recalc,
+	.set_rate	= &omap2_reprogram_dpllcore,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.ops		= &clkops_apll96,
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.ops		= &clkops_apll54,
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.ops		= &clkops_null,
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &osc_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.ops		= &clkops_null,
+	.parent		= &sys_clkout_src,
+	.clkdm_name	= "wkup_clkdm",
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2_src = {
+	.name		= "sys_clkout2_src",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
+	.parent		= &sys_clkout2_src,
+	.clkdm_name	= "wkup_clkdm",
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "dsp_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/* This clock does not exist as such in the TRM. */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.ops		= &clkops_null,
+	.parent		= &dsp_fck,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* 2420 only */
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dsp_irate_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
+};
+
+/*
+ * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
+ * the C54x, but which is contained in the DSP powerdomain.  Does not
+ * exist on later OMAPs.
+ */
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "iva1_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &iva1_ifck,
+	.clkdm_name	= "iva1_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_ck,		/* Core or sys */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &secure_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
+ * split into two separate clocks, since the parent clocks are different
+ * and the clockdomains are also different.
+ */
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate vlynq_fck_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate vlynq_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel vlynq_fck_clksel[] = {
+	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
+	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
+	.clksel		= vlynq_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap2420_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_242X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
+	/* DSS domain clocks */
+	CLK("omapdss",	"ick",		&dss_ick,	CK_242X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_242X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_242X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_242X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_242X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_242X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
+	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
+	CLK("musb_hdrc",	"fck",	&osc_ck,	CK_242X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2420_clk_init(void)
+{
+	const struct prcm_config *prcm;
+	struct omap_clk *c;
+	u32 clkrate;
+
+	prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
+	cpu_mask = RATE_IN_242X;
+	rate_table = omap2420_rate_table;
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+	     c++)
+		clk_preinit(c->lk.clk);
+
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
+
+	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+	     c++) {
+		clkdev_add(&c->lk);
+		clk_register(c->lk.clk);
+		omap2_init_clk_clkdm(c->lk.clk);
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+		(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	dclk = clk_get(NULL, "dpll_ck");
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
new file mode 100644
index 0000000..44d0ccc
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -0,0 +1,59 @@
+/*
+ * clock2430.c - OMAP2430-specific clock integration code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit,
+					   u8 *idlest_val)
+{
+	*idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
new file mode 100644
index 0000000..b33118f
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -0,0 +1,2008 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock2430_data.c
+ *
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2010 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+
+/*
+ * 2430 clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ */
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+static struct clk secure_32k_ck = {
+	.name		= "secure_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.ops		= &clkops_oscck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* Without modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.ops		= &clkops_null,
+	.parent		= &osc_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2xxx_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.ops		= &clkops_null,
+	.rate		= 54000000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
+	.max_multiplier		= 1023,
+	.min_divider		= 1,
+	.max_divider		= 16,
+	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_dpllcore_recalc,
+	.set_rate	= &omap2_reprogram_dpllcore,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.ops		= &clkops_apll96,
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.ops		= &clkops_apll54,
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* func_96m_ck */
+static const struct clksel_rate func_96m_apll96_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_96m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};
+
+static const struct clksel func_96m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
+	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2430_96M_SOURCE_MASK,
+	.clksel		= func_96m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.ops		= &clkops_null,
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &osc_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.ops		= &clkops_null,
+	.parent		= &sys_clkout_src,
+	.clkdm_name	= "wkup_clkdm",
+	.clksel_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2430_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2430-IVA2.1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "dsp_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/* This clock does not exist as such in the TRM. */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.ops		= &clkops_null,
+	.parent		= &dsp_fck,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dsp_irate_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ * These clocks are usable in chassis mode only.
+ */
+static const struct clksel_rate mdm_ick_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
+	{ .div = 0 }
+};
+
+static const struct clksel mdm_ick_clksel[] = {
+	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "mdm_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
+	.clksel		= mdm_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &osc_ck,
+	.clkdm_name	= "mdm_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_ck,		/* Core or sys */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &secure_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
+ * split into two separate clocks, since the parent clocks are different
+ * and the clockdomains are also different.
+ */
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * XXX This is marked as a 2420-only define, but it claims to be present
+ * on 2430 also.  Double-check.
+ */
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs2_fck",
+	.ops		= &clkops_omap2430_i2chs_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * XXX This is marked as a 2420-only define, but it claims to be present
+ * on 2430 also.  Double-check.
+ */
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs1_fck",
+	.ops		= &clkops_omap2430_i2chs_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap2430_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_243X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_243X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X),
+	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X),
+	/* Modem domain clocks */
+	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
+	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
+	/* DSS domain clocks */
+	CLK("omapdss",	"ick",		&dss_ick,	CK_243X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X),
+	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X),
+	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
+	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
+	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
+	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2430_clk_init(void)
+{
+	const struct prcm_config *prcm;
+	struct omap_clk *c;
+	u32 clkrate;
+
+	prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
+	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
+	cpu_mask = RATE_IN_243X;
+	rate_table = omap2430_rate_table;
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
+	     c++)
+		clk_preinit(c->lk.clk);
+
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
+
+	for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
+	     c++) {
+		clkdev_add(&c->lk);
+		clk_register(c->lk.clk);
+		omap2_init_clk_clkdm(c->lk.clk);
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+		(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	dclk = clk_get(NULL, "dpll_ck");
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 5420356..80bb0f0 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -1,15 +1,15 @@
 /*
- *  linux/arch/arm/mach-omap2/clock.c
+ * clock2xxx.c - OMAP2xxx-specific clock integration code
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
  *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
  *
- *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- *  Gordon McNutt and RidgeRun, Inc.
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,568 +17,28 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/bitops.h>
 
 #include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/prcm.h>
-#include <plat/clkdev_omap.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
 
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED			0
-#define EN_APLL_LOCKED			3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ		0
-#define APLLS_CLKIN_13MHZ		2
-#define APLLS_CLKIN_12MHZ		3
-
-/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
-
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
 struct clk *vclk, *sclk, *dclk;
 
-void __iomem *prcm_clksrc_ctrl;
-
-/*-------------------------------------------------------------------------
- * Omap24xx specific clock functions
- *-------------------------------------------------------------------------*/
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit)
-{
-	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clkops clkops_omap2430_i2chs_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual).  This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
-	long long core_clk;
-	u32 v;
-
-	core_clk = omap2_get_dpll_rate(clk);
-
-	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (v == CORE_CLK_SRC_32K)
-		core_clk = 32768;
-	else
-		core_clk *= v;
-
-	return core_clk;
-}
-
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-const struct clkops clkops_oscck = {
-	.enable		= omap2_enable_osc_ck,
-	.disable	= omap2_disable_osc_ck,
-};
-
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk *clk)
-{
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
-}
-#endif	/* OLD_CK */
-
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
-{
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
-			     clk->name);
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
-}
-
-static int omap2_clk_apll96_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
-}
-
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
-{
-	u32 cval;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-const struct clkops clkops_apll96 = {
-	.enable		= omap2_clk_apll96_enable,
-	.disable	= omap2_clk_apll_disable,
-};
-
-const struct clkops clkops_apll54 = {
-	.enable		= omap2_clk_apll54_enable,
-	.disable	= omap2_clk_apll_disable,
-};
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
-	u32 high, low, core_clk_src;
-
-	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
-unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
-	return omap2xxx_clk_get_core_rate(clk);
-}
-
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	const struct dpll_data *dd;
-
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpllcore_round_rate(rate);
-		if (valid_rate != rate)
-			return -EINVAL;
-
-		if (mult == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		dd = clk->dpll_data;
-		if (!dd)
-			return -EINVAL;
-
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
-		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
-					   dd->div1_mask);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		} else {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
-			mult = (rate / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL;
-		}
-		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
-		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		/* For omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-	}
-
-	return 0;
-}
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-	return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	const struct prcm_config *ptr;
-	long highest_rate;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-		if (ptr->xtal_speed != sys_ck_rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, done_rate, bypass = 0, tmp;
-	const struct prcm_config *prcm;
-	unsigned long found_speed = 0;
-	unsigned long flags;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-		       rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-		    CORE_CLK_SRC_DPLL_X2)
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		else
-			done_rate = CORE_CLK_SRC_DPLL;
-
-		/* MPU divider */
-		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
-
-		/* x2 to enter omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
 /*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
+ * Omap24xx specific clock functions
  */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	long sys_ck_rate;
-	int i = 0;
-	int tbl_sz = 0;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	kfree(freq_table);
-}
-
-#endif
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef	CONFIG_CPU_FREQ
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
-};
-
-static u32 omap2_get_apll_clkin(void)
-{
-	u32 aplls, srate = 0;
-
-	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
-	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
-	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
-	if (aplls == APLLS_CLKIN_19_2MHZ)
-		srate = 19200000;
-	else if (aplls == APLLS_CLKIN_13MHZ)
-		srate = 13000000;
-	else if (aplls == APLLS_CLKIN_12MHZ)
-		srate = 12000000;
-
-	return srate;
-}
-
-static u32 omap2_get_sysclkdiv(void)
-{
-	u32 div;
-
-	div = __raw_readl(prcm_clksrc_ctrl);
-	div &= OMAP_SYSCLKDIV_MASK;
-	div >>= OMAP_SYSCLKDIV_SHIFT;
-
-	return div;
-}
-
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
-unsigned long omap2_sys_clk_recalc(struct clk *clk)
-{
-	return clk->parent->rate / omap2_get_sysclkdiv();
-}
 
 /*
  * Set clocks for bypass mode for reboot to work.
  */
-void omap2_clk_prepare_for_reboot(void)
+void omap2xxx_clk_prepare_for_reboot(void)
 {
 	u32 rate;
 
@@ -590,37 +50,24 @@ void omap2_clk_prepare_for_reboot(void)
 }
 
 /*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
+ * Switch the MPU rate if specified on cmdline.  We cannot do this
+ * early until cmdline is parsed.  XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
  */
-static int __init omap2_clk_arch_init(void)
+static int __init omap2xxx_clk_arch_init(void)
 {
-	struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
-	unsigned long sys_ck_rate;
+	int ret;
 
-	if (!mpurate)
-		return -EINVAL;
+	if (!cpu_is_omap24xx())
+		return 0;
 
-	virt_prcm_set = clk_get(NULL, "virt_prcm_set");
-	sys_ck = clk_get(NULL, "sys_ck");
-	dpll_ck = clk_get(NULL, "dpll_ck");
-	mpu_ck = clk_get(NULL, "mpu_ck");
+	ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
+	if (!ret)
+		omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
 
-	if (clk_set_rate(virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	recalculate_root_clocks();
-
-	sys_ck_rate = clk_get_rate(sys_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
-		(clk_get_rate(dpll_ck) / 1000000),
-		(clk_get_rate(mpu_ck) / 1000000));
-
-	return 0;
+	return ret;
 }
-arch_initcall(omap2_clk_arch_init);
+
+arch_initcall(omap2xxx_clk_arch_init);
 
 
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index e35efde..6a658b8 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -1,35 +1,38 @@
 /*
  * OMAP2 clock function prototypes and macros
  *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2005-2010 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
 
 unsigned long omap2_table_mpu_recalc(struct clk *clk);
 int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
 unsigned long omap2_osc_clk_recalc(struct clk *clk);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
 unsigned long omap2_dpllcore_recalc(struct clk *clk);
 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+u32 omap2xxx_get_apll_clkin(void);
+u32 omap2xxx_get_sysclkdiv(void);
+void omap2xxx_clk_prepare_for_reboot(void);
 
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
 #ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+int omap2420_clk_init(void);
 #else
-#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#define omap2420_clk_init()	0
 #endif
 
-extern void __iomem *prcm_clksrc_ctrl;
+#ifdef CONFIG_ARCH_OMAP2430
+int omap2430_clk_init(void);
+#else
+#define omap2430_clk_init()	0
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
 
 extern struct clk *dclk;
 
diff --git a/arch/arm/mach-omap2/clock2xxx_data.c b/arch/arm/mach-omap2/clock2xxx_data.c
deleted file mode 100644
index 97dc7cf..0000000
--- a/arch/arm/mach-omap2/clock2xxx_data.c
+++ /dev/null
@@ -1,2309 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock2xxx_data.c
- *
- *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2009 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-
-#include <plat/clkdev_omap.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "prm.h"
-#include "cm.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent.	In many
- *	cases the parent is selectable.	The get/set parent calls will also
- *	switch sources.
- *
- *	Many some clocks say always_enabled, but they can be auto idled for
- *	power savings. They will always be available upon clock request.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most periferals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32000,
-	.flags		= RATE_FIXED,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-static struct clk secure_32k_ck = {
-	.name		= "secure_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.ops		= &clkops_oscck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_osc_clk_recalc,
-};
-
-/* Without modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.ops		= &clkops_null,
-	.parent		= &osc_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.ops		= &clkops_null,
-	.rate		= 54000000,
-	.flags		= RATE_FIXED,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
- * deal with this
- */
-
-static struct dpll_data dpll_dd = {
-	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
-	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
-	.clk_bypass		= &sys_ck,
-	.clk_ref		= &sys_ck,
-	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
-	.max_multiplier		= 1024,
-	.min_divider		= 1,
-	.max_divider		= 16,
-	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-/*
- * XXX Cannot add round_rate here yet, as this is still a composite clock,
- * not just a DPLL
- */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.dpll_data	= &dpll_dd,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_dpllcore_recalc,
-	.set_rate	= &omap2_reprogram_dpllcore,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.ops		= &clkops_apll96,
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.ops		= &clkops_apll54,
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-};
-
-/*
- * PRCM digital base sources
- */
-
-/* func_54m_ck */
-
-static const struct clksel_rate func_54m_apll54_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel func_54m_clksel[] = {
-	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
-	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
-	{ .parent = NULL },
-};
-
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_54M_SOURCE,
-	.clksel		= func_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* func_96m_ck */
-static const struct clksel_rate func_96m_apll96_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_96m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel func_96m_clksel[] = {
-	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
-	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
-	{ .parent = NULL }
-};
-
-/* The parent of this clock is not selectable on 2420. */
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP2430_96M_SOURCE,
-	.clksel		= func_96m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* func_48m_ck */
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel func_48m_clksel[] = {
-	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
-	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_48M_SOURCE,
-	.clksel		= func_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.ops		= &clkops_null,
-	.parent		= &func_48m_ck,
-	.fixed_div	= 4,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &osc_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The common_clkout* clksel_rate structs are common to
- * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
- * sys_clkout2_* are 2420-only, so the
- * clksel_rate flags fields are inaccurate for those clocks. This is
- * harmless since access to those clocks are gated by the struct clk
- * flags fields, which mark them as 2420-only.
- */
-static const struct clksel_rate common_clkout_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
-	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
-	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
-	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
-	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout_src = {
-	.name		= "sys_clkout_src",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
-	.clksel		= common_clkout_src_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate common_clkout_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout_clksel[] = {
-	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.ops		= &clkops_null,
-	.parent		= &sys_clkout_src,
-	.clkdm_name	= "wkup_clkdm",
-	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
-	.clksel		= sys_clkout_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2_src = {
-	.name		= "sys_clkout2_src",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
-	.clksel		= common_clkout_src_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
-	{ .parent = NULL }
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.parent		= &sys_clkout2_src,
-	.clkdm_name	= "wkup_clkdm",
-	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
-	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static const struct clksel_rate mpu_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 0 },
-};
-
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &core_ck, .rates = mpu_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clkdm_name	= "mpu_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
-	.clksel		= mpu_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- *
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static const struct clksel_rate dsp_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 0 },
-};
-
-static const struct clksel dsp_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clkdm_name	= "dsp_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
-	.clksel		= dsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* DSP interface clock */
-static const struct clksel_rate dsp_irate_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
-	{ .div = 0 },
-};
-
-static const struct clksel dsp_irate_ick_clksel[] = {
-	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
-	{ .parent = NULL }
-};
-
-/* This clock does not exist as such in the TRM. */
-static struct clk dsp_irate_ick = {
-	.name		= "dsp_irate_ick",
-	.ops		= &clkops_null,
-	.parent		= &dsp_fck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
-	.clksel		= dsp_irate_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	      = &omap2_clksel_set_rate
-};
-
-/* 2420 only */
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dsp_irate_ick,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
-};
-
-/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dsp_irate_ick,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-};
-
-/*
- * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
- * the C54x, but which is contained in the DSP powerdomain.  Does not
- * exist on later OMAPs.
- */
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.flags		= CONFIG_PARTICIPANT | DELAYED_APP,
-	.clkdm_name	= "iva1_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
-	.clksel		= dsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &iva1_ifck,
-	.clkdm_name	= "iva1_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static const struct clksel_rate core_l3_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel core_l3_clksel[] = {
-	{ .parent = &core_ck, .rates = core_l3_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clkdm_name	= "core_l3_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
-	.clksel		= core_l3_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* usb_l4_ick */
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
-	{ .parent = NULL },
-};
-
-/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
-	.clksel		= usb_l4_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ck,
-	.flags		= DELAYED_APP,
-	.clkdm_name	= "core_l4_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
-	.clksel		= l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.flags		= DELAYED_APP,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_sst_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/*
- * Presumably this is the same as SSI_ICLK.
- * TRM contradicts itself on what clockdomain SSI_ICLK is in
- */
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
-
-/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
-static const struct clksel gfx_fck_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- * These clocks are usable in chassis mode only.
- */
-static const struct clksel_rate mdm_ick_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
-	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
-	{ .div = 0 }
-};
-
-static const struct clksel mdm_ick_clksel[] = {
-	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.flags		= DELAYED_APP | CONFIG_PARTICIPANT,
-	.clkdm_name	= "mdm_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
-	.clksel		= mdm_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &osc_ck,
-	.clkdm_name	= "mdm_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-/* XXX Add RATE_NOT_VALIDATED */
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
-	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
-	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_ck,		/* Core or sys */
-	.flags		= DELAYED_APP,
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
-	.clksel		= dss1_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel dss2_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
-	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= DELAYED_APP,
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
-	.clksel		= dss2_fck_clksel,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static const struct clksel_rate gpt_alt_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
-	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
-	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &secure_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
- * split into two separate clocks, since the parent clocks are different
- * and the clockdomains are also different.
- */
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2430_i2chs_wait,
-	.id		= 2,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2430_i2chs_wait,
-	.id		= 1,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &core_l3_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdma_fck = {
-	.name		= "sdma_fck",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdma_ick = {
-	.name		= "sdma_ick",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate vlynq_fck_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate vlynq_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
-	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel vlynq_fck_clksel[] = {
-	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
-	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.flags		= DELAYED_APP,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
-	.clksel		= vlynq_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &func_96m_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.ops		= &clkops_null,
-	.flags		= DELAYED_APP,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap24xx_clks[] = {
-	/* external root sources */
-	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
-	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
-	/* internal analog sources */
-	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
-	/* internal prcm root sources */
-	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
-	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
-	/* mpu domain clocks */
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
-	/* dsp domain clocks */
-	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
-	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
-	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
-	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
-	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
-	/* GFX domain clocks */
-	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
-	/* Modem domain clocks */
-	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
-	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
-	/* DSS domain clocks */
-	CLK("omapdss",	"ick",		&dss_ick,	CK_243X | CK_242X),
-	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
-	/* L3 domain clocks */
-	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
-	/* L4 domain clocks */
-	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
-	/* virtual meta-group clock */
-	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
-	/* general l4 interface ck, multi-parent functional clk */
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
-	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
-	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
-	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
-	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
-	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
-	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
-	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
-	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
-	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
-	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
-	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
-};
-
-/*
- * init code
- */
-
-int __init omap2_clk_init(void)
-{
-	const struct prcm_config *prcm;
-	struct omap_clk *c;
-	u32 clkrate;
-	u16 cpu_clkflg;
-
-	if (cpu_is_omap242x()) {
-		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_242X;
-		cpu_clkflg = CK_242X;
-		rate_table = omap2420_rate_table;
-	} else if (cpu_is_omap2430()) {
-		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_243X;
-		cpu_clkflg = CK_243X;
-		rate_table = omap2430_rate_table;
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
-	propagate_rate(&osc_ck);
-	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
-	propagate_rate(&sys_ck);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	dclk = clk_get(NULL, "dpll_ck");
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index d4217b9..6febd5f 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,13 +2,14 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Paul Walmsley
+ * Jouni Högander
  *
  * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,49 +17,23 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
 
 #include "clock.h"
 #include "clock34xx.h"
-#include "sdrc.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-#define CYCLES_PER_MHZ			1000000
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
  * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
@@ -66,13 +41,15 @@ struct clk *sdrc_ick_p, *arm_fck_p;
  */
 static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
 					    void __iomem **idlest_reg,
-					    u8 *idlest_bit)
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_ssi_wait = {
@@ -87,6 +64,7 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
  * target IDLEST bits.  For our purposes, we are concerned with the
@@ -97,7 +75,8 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
  */
 static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 						    void __iomem **idlest_reg,
-						    u8 *idlest_bit)
+						    u8 *idlest_bit,
+						    u8 *idlest_val)
 {
 	u32 r;
 
@@ -105,6 +84,7 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 	*idlest_reg = (__force void __iomem *)r;
 	/* USBHOST_IDLE has same shift */
 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
@@ -119,6 +99,7 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
  * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
@@ -126,13 +107,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
  */
 static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
 						 void __iomem **idlest_reg,
-						 u8 *idlest_bit)
+						 u8 *idlest_bit,
+						 u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_hsotgusb_wait = {
@@ -141,213 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
 	.find_companion = omap2_clk_dflt_find_companion,
 };
-
-const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-};
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (omap_rev() == OMAP3430_REV_ES1_0) {
-		printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
-		       "silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-	return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-
-/*
- * CORE DPLL (DPLL3) rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
-	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
-	pr_debug("clock: SDRC CS0 timing params used:"
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: "
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-
-	return 0;
-}
-
-/* Common clock code */
-
-/*
- * As it is structured now, this will prevent an OMAP2/3 multiboot
- * kernel from compiling.  This will need further attention.
- */
-#if defined(CONFIG_ARCH_OMAP3)
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	/* REVISIT: Not ready for 343x */
-#if 0
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-#endif
-}
-
-void omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
-
-	/* Enable autoidle to allow it to enter low power bypass */
-	omap3_dpll_allow_idle(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
-	return;
-}
-
-/* REVISIT: Move this init stuff out into clock.c */
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
-	unsigned long osc_sys_rate;
-
-	if (!mpurate)
-		return -EINVAL;
-
-	/* XXX test these for success */
-	dpll1_ck = clk_get(NULL, "dpll1_ck");
-	arm_fck = clk_get(NULL, "arm_fck");
-	core_ck = clk_get(NULL, "core_ck");
-	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
-
-	/* REVISIT: not yet ready for 343x */
-	if (clk_set_rate(dpll1_ck, mpurate))
-		printk(KERN_ERR "*** Unable to set MPU rate\n");
-
-	recalculate_root_clocks();
-
-	osc_sys_rate = clk_get_rate(osc_sys_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(osc_sys_rate / 1000000),
-		((osc_sys_rate / 100000) % 10),
-		(clk_get_rate(core_ck) / 1000000),
-		(clk_get_rate(arm_fck) / 1000000));
-
-	calibrate_delay();
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9a2c07e..628e8de 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,24 +1,15 @@
 /*
- * OMAP3 clock function prototypes and macros
+ * OMAP34xx clock function prototypes and macros
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-void omap3_clk_lock_dpll5(void);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-/* OMAP34xx-specific clkops */
 extern const struct clkops clkops_omap3430es2_ssi_wait;
 extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
 extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_noncore_dpll_ops;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
deleted file mode 100644
index 74930e3..0000000
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ /dev/null
@@ -1,3289 +0,0 @@
-/*
- * OMAP3 clock data
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- * With many device clock fixes by Kevin Hilman and Jouni Högander
- * DPLL bypass clock support added by Roman Tereshonkov
- *
- */
-
-/*
- * Virtual clocks are introduced as convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-
-#include <plat/control.h>
-#include <plat/clkdev_omap.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-
-/*
- * clocks
- */
-
-#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
-
-/* Maximum DPLL multiplier, divider values for OMAP3 */
-#define OMAP3_MAX_DPLL_MULT		2048
-#define OMAP3_MAX_DPLL_DIV		128
-
-/*
- * DPLL1 supplies clock to the MPU.
- * DPLL2 supplies clock to the IVA2.
- * DPLL3 supplies CORE domain clocks.
- * DPLL4 supplies peripheral clocks.
- * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
- */
-
-/* Forward declarations for DPLL bypass clocks */
-static struct clk dpll1_fck;
-static struct clk dpll2_fck;
-
-/* PRM CLOCKS */
-
-/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
-static struct clk omap_32k_fck = {
-	.name		= "omap_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk secure_32k_fck = {
-	.name		= "secure_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-/* Virtual source clocks for osc_sys_ck */
-static struct clk virt_12m_ck = {
-	.name		= "virt_12m_ck",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_13m_ck = {
-	.name		= "virt_13m_ck",
-	.ops		= &clkops_null,
-	.rate		= 13000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_16_8m_ck = {
-	.name		= "virt_16_8m_ck",
-	.ops		= &clkops_null,
-	.rate		= 16800000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_19_2m_ck = {
-	.name		= "virt_19_2m_ck",
-	.ops		= &clkops_null,
-	.rate		= 19200000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_26m_ck = {
-	.name		= "virt_26m_ck",
-	.ops		= &clkops_null,
-	.rate		= 26000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_38_4m_ck = {
-	.name		= "virt_38_4m_ck",
-	.ops		= &clkops_null,
-	.rate		= 38400000,
-	.flags		= RATE_FIXED,
-};
-
-static const struct clksel_rate osc_sys_12m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_13m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_19_2m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_26m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_38_4m_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel osc_sys_clksel[] = {
-	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
-	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
-	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
-	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
-	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
-	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
-	{ .parent = NULL },
-};
-
-/* Oscillator clock */
-/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
-static struct clk osc_sys_ck = {
-	.name		= "osc_sys_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSEL,
-	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
-	.clksel		= osc_sys_clksel,
-	/* REVISIT: deal with autoextclkmode? */
-	.flags		= RATE_FIXED,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate div2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel sys_clksel[] = {
-	{ .parent = &osc_sys_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
-/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
-static struct clk sys_ck = {
-	.name		= "sys_ck",
-	.ops		= &clkops_null,
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
-	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
-	.clksel		= sys_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sys_altclk = {
-	.name		= "sys_altclk",
-	.ops		= &clkops_null,
-};
-
-/* Optional external clock input for some McBSPs */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/* PRM EXTERNAL CLOCK OUTPUT */
-
-static struct clk sys_clkout1 = {
-	.name		= "sys_clkout1",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &osc_sys_ck,
-	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLLS */
-
-/* CM CLOCKS */
-
-static const struct clksel_rate div16_dpll_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
-	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
-	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
-	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-/* DPLL1 */
-/* MPU clock source */
-/* Type: DPLL */
-static struct dpll_data dpll1_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll1_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll1_ck = {
-	.name		= "dpll1_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll1_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed.
- */
-static struct clk dpll1_x2_ck = {
-	.name		= "dpll1_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_ck,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
-static const struct clksel div16_dpll1_x2m2_clksel[] = {
-	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * Does not exist in the TRM - needed to separate the M2 divider from
- * bypass selection in mpu_ck
- */
-static struct clk dpll1_x2m2_ck = {
-	.name		= "dpll1_x2m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll1_x2m2_clksel,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL2 */
-/* IVA2 clock source */
-/* Type: DPLL */
-
-static struct dpll_data dpll2_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll2_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
-				(1 << DPLL_LOW_POWER_BYPASS),
-	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll2_ck = {
-	.name		= "dpll2_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll2_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll2_m2x2_clksel[] = {
-	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
- * or CLKOUTX2. CLKOUT seems most plausible.
- */
-static struct clk dpll2_m2_ck = {
-	.name		= "dpll2_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll2_m2x2_clksel,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DPLL3
- * Source clock for all interfaces and for some device fclks
- * REVISIT: Also supports fast relock bypass - not included below
- */
-static struct dpll_data dpll3_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
-	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll3_ck = {
-	.name		= "dpll3_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll3_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed
- */
-static struct clk dpll3_x2_ck = {
-	.name		= "dpll3_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate div31_dpll3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
-	{ .div = 0 },
-};
-
-static const struct clksel div31_dpll3m2_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
-	{ .parent = NULL }
-};
-
-/* DPLL3 output M2 - primary control point for CORE speed */
-static struct clk dpll3_m2_ck = {
-	.name		= "dpll3_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div31_dpll3m2_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap3_core_dpll_m2_set_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll3_m2x2_ck = {
-	.name		= "dpll3_m2x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static const struct clksel div16_dpll3_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll3_m3x2_ck */
-static struct clk dpll3_m3_ck = {
-	.name		= "dpll3_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
-	.clksel		= div16_dpll3_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll3_m3x2_ck = {
-	.name		= "dpll3_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll3_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_core_alwon_ck = {
-	.name		= "emu_core_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m3x2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL4 */
-/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
-/* Type: DPLL */
-static struct dpll_data dpll4_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
-	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll4_ck = {
-	.name		= "dpll4_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll4_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_dpll4_set_rate,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed --
- * XXX does this serve any downstream clocks?
- */
-static struct clk dpll4_x2_ck = {
-	.name		= "dpll4_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel div16_dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck = {
-	.name		= "dpll4_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
-	.clksel_mask	= OMAP3430_DIV_96M_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m2x2_ck = {
-	.name		= "dpll4_m2x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/*
- * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
- * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
- * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
- * CM_96K_(F)CLK.
- */
-static struct clk omap_96m_alwon_fck = {
-	.name		= "omap_96m_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate omap_96m_dpll_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_96m_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_96m_fck_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
-	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
-	.clksel		= omap_96m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck = {
-	.name		= "dpll4_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m3x2_ck = {
-	.name		= "dpll4_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
-	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_54m_fck = {
-	.name		= "omap_54m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
-	.clksel		= omap_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate omap_48m_cm96m_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
-	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_48m_fck = {
-	.name		= "omap_48m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
-	.clksel		= omap_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk omap_12m_fck = {
-	.name		= "omap_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.fixed_div	= 4,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck = {
-	.name		= "dpll4_m4_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m4x2_ck = {
-	.name		= "dpll4_m4x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m4_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck = {
-	.name		= "dpll4_m5_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m5x2_ck = {
-	.name		= "dpll4_m5x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m5_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck = {
-	.name		= "dpll4_m6_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m6x2_ck = {
-	.name		= "dpll4_m6x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m6_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_per_alwon_ck = {
-	.name		= "emu_per_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m6x2_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL5 */
-/* Supplies 120MHz clock, USIM source clock */
-/* Type: DPLL */
-/* 3430ES2 only */
-static struct dpll_data dpll5_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
-	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
-	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
-	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll5_ck = {
-	.name		= "dpll5_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll5_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll5_clksel[] = {
-	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dpll5_m2_ck = {
-	.name		= "dpll5_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
-	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
-	.clksel		= div16_dpll5_clksel,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM EXTERNAL CLOCK OUTPUTS */
-
-static const struct clksel_rate clkout2_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
-	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk clkout2_src_ck = {
-	.name		= "clkout2_src_ck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
-	.clksel		= clkout2_src_clksel,
-	.clkdm_name	= "core_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate sys_clkout2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM OUTPUT CLOCKS */
-
-static struct clk corex2_fck = {
-	.name		= "corex2_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL power domain clock controls */
-
-static const struct clksel_rate div4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel div4_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div4_rates },
-	{ .parent = NULL }
-};
-
-/*
- * REVISIT: Are these in DPLL power domain or CM power domain? docs
- * may be inconsistent here?
- */
-static struct clk dpll1_fck = {
-	.name		= "dpll1_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mpu_ck = {
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2m2_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
-static const struct clksel_rate arm_fck_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel arm_fck_clksel[] = {
-	{ .parent = &mpu_ck, .rates = arm_fck_rates },
-	{ .parent = NULL }
-};
-
-static struct clk arm_fck = {
-	.name		= "arm_fck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= arm_fck_clksel,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX What about neon_clkdm ? */
-
-/*
- * REVISIT: This clock is never specifically defined in the 3430 TRM,
- * although it is referenced - so this is a guess
- */
-static struct clk emu_mpu_alwon_ck = {
-	.name		= "emu_mpu_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll2_fck = {
-	.name		= "dpll2_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_ck = {
-	.name		= "iva2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll2_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Common interface clocks */
-
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l3_ick = {
-	.name		= "l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
-	.clksel		= div2_core_clksel,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel div2_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ick = {
-	.name		= "l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
-	.clksel		= div2_l3_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-
-};
-
-static const struct clksel div2_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk rm_ick = {
-	.name		= "rm_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
-	.clksel		= div2_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* GFX power domain */
-
-/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
-
-static const struct clksel gfx_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = gfx_l3_rates },
-	{ .parent = NULL }
-};
-
-/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
-static struct clk gfx_l3_ck = {
-	.name		= "gfx_l3_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_l3_fck = {
-	.name		= "gfx_l3_fck",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_l3_clksel,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_l3_ick = {
-	.name		= "gfx_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg1_ck = {
-	.name		= "gfx_cg1_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg2_ck = {
-	.name		= "gfx_cg2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SGX power domain - 3430ES2 only */
-
-static const struct clksel_rate sgx_core_rates[] = {
-	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_96m_rates[] = {
-	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel sgx_clksel[] = {
-	{ .parent = &core_ck,	 .rates = sgx_core_rates },
-	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sgx_fck = {
-	.name		= "sgx_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
-	.clksel		= sgx_clksel,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sgx_ick = {
-	.name		= "sgx_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE power domain */
-
-static struct clk d2d_26m_fck = {
-	.name		= "d2d_26m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk modem_fck = {
-	.name		= "modem_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sad2d_ick = {
-	.name		= "sad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mad2d_ick = {
-	.name		= "mad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel omap343x_gpt_clksel[] = {
-	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
-	{ .parent = NULL}
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk cpefuse_fck = {
-	.name		= "cpefuse_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ts_fck = {
-	.name		= "ts_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_fck = {
-	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE 96M FCLK-derived clocks */
-
-static struct clk core_96m_fck = {
-	.name		= "core_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
- * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
- */
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_15_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CORE_48M_FCK-derived clocks */
-
-static struct clk core_48m_fck = {
-	.name		= "core_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fshostusb_fck = {
-	.name		= "fshostusb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_12M_FCK based clocks */
-
-static struct clk core_12m_fck = {
-	.name		= "core_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_12m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_12m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL3-derived clock */
-
-static const struct clksel_rate ssi_ssr_corex2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_clksel[] = {
-	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_fck_3430es1 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_ssr_fck_3430es2 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es1 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es1,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es2 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es2,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-
-
-/* CORE_L3_ICK based clocks */
-
-/*
- * XXX must add clk_enable/clk_disable for these if standard code won't
- * handle it
- */
-static struct clk core_l3_ick = {
-	.name		= "core_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es1 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es2 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap3430es2_hsotgusb_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ick,
-	.flags		= ENABLE_ON_INIT, /* huh? */
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURITY_L3_ICK based clocks */
-
-static struct clk security_l3_ick = {
-	.name		= "security_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_L4_ICK based clocks */
-
-static struct clk core_l4_ick = {
-	.name		= "core_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_ick = {
-	.name		= "usbtll_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Intersystem Communication Registers - chassis mode only */
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes2_ick = {
-	.name		= "aes2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha12_ick = {
-	.name		= "sha12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des2_ick = {
-	.name		= "des2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SSI_L4_ICK based clocks */
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es1 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es2 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
- * but l4_ick makes more sense to me */
-
-static const struct clksel usb_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk usb_l4_ick = {
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
-	.clksel		= usb_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SECURITY_L4_ICK2 based clocks */
-
-static struct clk security_l4_ick2 = {
-	.name		= "security_l4_ick2",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes1_ick = {
-	.name		= "aes1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha11_ick = {
-	.name		= "sha11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des1_ick = {
-	.name		= "des1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DSS */
-static struct clk dss1_alwon_fck_3430es1 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_alwon_fck_3430es2 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_tv_fck = {
-	.name		= "dss_tv_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_54m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_96m_fck = {
-	.name		= "dss_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss2_alwon_fck = {
-	.name		= "dss2_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es1 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es2 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CAM */
-
-static struct clk cam_mclk = {
-	.name		= "cam_mclk",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m5x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk csi2_96m_fck = {
-	.name		= "csi2_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* USBHOST - 3430ES2 only */
-
-static struct clk usbhost_120m_fck = {
-	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_48m_fck = {
-	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &omap_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "usbhost_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* WKUP */
-
-static const struct clksel_rate usim_96m_rates[] = {
-	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
-	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate usim_120m_rates[] = {
-	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
-	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
-	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel usim_clksel[] = {
-	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
-	{ .parent = &sys_ck,		.rates = div2_rates },
-	{ .parent = NULL },
-};
-
-/* 3430ES2 only */
-static struct clk usim_fck = {
-	.name		= "usim_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
-	.clksel		= usim_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk wkup_32k_fck = {
-	.name		= "wkup_32k_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_dbck = {
-	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_fck = {
-	.name		= "wdt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wkup_l4_ick = {
-	.name		= "wkup_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* 3430ES2 only */
-/* Never specifically named in the TRM, so we have to infer a likely name */
-static struct clk usim_ick = {
-	.name		= "usim_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_ick = {
-	.name		= "wdt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_ick = {
-	.name		= "gpio1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omap_32ksync_ick = {
-	.name		= "omap_32ksync_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* XXX This clock no longer exists in 3430 TRM rev F */
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-
-
-/* PER clock domain */
-
-static struct clk per_96m_fck = {
-	.name		= "per_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_48m_fck = {
-	.name		= "per_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk per_32k_alwon_fck = {
-	.name		= "per_32k_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_dbck = {
-	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_dbck = {
-	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_dbck = {
-	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_dbck = {
-	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_dbck = {
-	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_l4_ick = {
-	.name		= "per_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_ick = {
-	.name		= "gpio6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_ick = {
-	.name		= "gpio4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_ick = {
-	.name		= "gpio3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_ick = {
-	.name		= "gpio2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* EMU clocks */
-
-/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
-
-static const struct clksel_rate emu_src_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_per_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_mpu_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel emu_src_clksel[] = {
-	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
-	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
-	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
-	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
-	{ .parent = NULL },
-};
-
-/*
- * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
- * to switch the source of some of the EMU clocks.
- * XXX Are there CLKEN bits for these EMU clks?
- */
-static struct clk emu_src_ck = {
-	.name		= "emu_src_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclk_emu_rates[] = {
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclk_fck = {
-	.name		= "pclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
-	.clksel		= pclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclkx2_emu_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclkx2_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclkx2_fck = {
-	.name		= "pclkx2_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
-	.clksel		= pclkx2_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel atclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk atclk_fck = {
-	.name		= "atclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
-	.clksel		= atclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk traceclk_src_fck = {
-	.name		= "traceclk_src_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate traceclk_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel traceclk_clksel[] = {
-	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
-	{ .parent = NULL },
-};
-
-static struct clk traceclk_fck = {
-	.name		= "traceclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
-	.clksel		= traceclk_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SR clocks */
-
-/* SmartReflex fclk (VDD1) */
-static struct clk sr1_fck = {
-	.name		= "sr1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SmartReflex fclk (VDD2) */
-static struct clk sr2_fck = {
-	.name		= "sr2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sr_l4_ick = {
-	.name		= "sr_l4_ick",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURE_32K_FCK clocks */
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_fck = {
-	.name		= "wdt1_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
-
-
-/*
- * clkdev
- */
-
-static struct omap_clk omap34xx_clks[] = {
-	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
-	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
-	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
-	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
-	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
-	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
-	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
-	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
-	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
-	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
-	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
-	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
-	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
-	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
-	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
-	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
-	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
-	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
-	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
-	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
-	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
-	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
-	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
-	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
-	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
-	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
-	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
-	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
-	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
-	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
-	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
-	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
-	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
-	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
-	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
-	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
-	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
-	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
-	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
-	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
-	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
-	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
-	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
-	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
-	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
-	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
-	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
-	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
-	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
-	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
-	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
-	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
-	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
-	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
-	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
-	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
-	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
-	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
-	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
-	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
-	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
-	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
-	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
-	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
-	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
-	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
-	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_343X),
-	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
-	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
-	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
-	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
-	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
-	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
-	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
-	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
-	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
-	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
-	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
-	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
-	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
-	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
-	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
-	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
-	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
-	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
-	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
-	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
-	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
-	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
-	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
-	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
-	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
-	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_343X),
-	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
-	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
-	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
-	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
-	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
-	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
-	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
-	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
-};
-
-
-int __init omap2_clk_init(void)
-{
-	/* struct prcm_config *prcm; */
-	struct omap_clk *c;
-	/* u32 clkrate; */
-	u32 cpu_clkflg;
-
-	if (cpu_is_omap34xx()) {
-		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CK_343X;
-
-		/*
-		 * Update this if there are further clock changes between ES2
-		 * and production parts
-		 */
-		if (omap_rev() == OMAP3430_REV_ES1_0) {
-			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CK_3430ES1;
-		} else {
-			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CK_3430ES2;
-		}
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* REVISIT: Not yet ready for OMAP3 */
-#if 0
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
-#endif
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/*
-	 * Lock DPLL5 and put it in autoidle.
-	 */
-	if (omap_rev() >= OMAP3430_REV_ES2_0)
-		omap3_clk_lock_dpll5();
-
-	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
-	sdrc_ick_p = clk_get(NULL, "sdrc_ick");
-	arm_fck_p = clk_get(NULL, "arm_fck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
new file mode 100644
index 0000000..b496a93
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -0,0 +1,124 @@
+/*
+ * OMAP3517/3505-specific clock framework functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Ranjith Lohithakshan
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3517.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK			0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL		0
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
+{
+	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
+	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+					    u8 *other_bit)
+{
+	*other_reg = (__force void __iomem *)(clk->enable_reg);
+	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+	else
+		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= am35xx_clk_find_idlest,
+	.find_companion	= am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
+ * and @idlest_bit.  No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= am35xx_clk_ipss_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
new file mode 100644
index 0000000..ca5e5a6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3517.h
@@ -0,0 +1,14 @@
+/*
+ * OMAP3517/3505 clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
new file mode 100644
index 0000000..0c5e25e
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -0,0 +1,72 @@
+/*
+ * OMAP36xx-specific clkops
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Mike Turquette
+ * Vijaykumar GN
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock36xx.h"
+
+
+/**
+ * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
+{
+	u32 dummy_v, orig_v, clksel_shift;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Restore the dividers */
+	if (!ret) {
+		clksel_shift = __ffs(clk->parent->clksel_mask);
+		orig_v = __raw_readl(clk->parent->clksel_reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << clksel_shift);
+		__raw_writel(dummy_v, clk->parent->clksel_reg);
+
+		/* Write the original divider */
+		__raw_writel(orig_v, clk->parent->clksel_reg);
+	}
+
+	return ret;
+}
+
+const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
+	.enable		= omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
+	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+};
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
new file mode 100644
index 0000000..a7dee5b
--- /dev/null
+++ b/arch/arm/mach-omap2/clock36xx.h
@@ -0,0 +1,13 @@
+/*
+ * OMAP36xx clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+
+extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
new file mode 100644
index 0000000..a447c4d
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -0,0 +1,104 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST		120000000
+
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (omap_rev() == OMAP3430_REV_ES1_0) {
+		pr_err("clock: DPLL4 cannot change rate due to "
+		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+void __init omap3_clk_lock_dpll5(void)
+{
+	struct clk *dpll5_clk;
+	struct clk *dpll5_m2_clk;
+
+	dpll5_clk = clk_get(NULL, "dpll5_ck");
+	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_enable(dpll5_clk);
+
+	/* Enable autoidle to allow it to enter low power bypass */
+	omap3_dpll_allow_idle(dpll5_clk);
+
+	/* Program dpll5_m2_clk divider for no division */
+	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+	clk_enable(dpll5_m2_clk);
+	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+	clk_disable(dpll5_m2_clk);
+	clk_disable(dpll5_clk);
+	return;
+}
+
+/* Common clock code */
+
+/*
+ * Switch the MPU rate if specified on cmdline.  We cannot do this
+ * early until cmdline is parsed.  XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
+ */
+static int __init omap3xxx_clk_arch_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return 0;
+
+	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
+	if (!ret)
+		omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck");
+
+	return ret;
+}
+
+arch_initcall(omap3xxx_clk_arch_init);
+
+
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
new file mode 100644
index 0000000..8bbeeaf
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx.h
@@ -0,0 +1,21 @@
+/*
+ * OMAP3-common clock function prototypes and macros
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+
+int omap3xxx_clk_init(void);
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
+
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
new file mode 100644
index 0000000..41b155a
--- /dev/null
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -0,0 +1,3513 @@
+/*
+ * OMAP3 clock data
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+
+#include <plat/control.h>
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "clock34xx.h"
+#include "clock36xx.h"
+#include "clock3517.h"
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * clocks
+ */
+
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT		2047
+#define OMAP3630_MAX_JTYPE_DPLL_MULT	4095
+#define OMAP3_MAX_DPLL_DIV		128
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.ops		= &clkops_null,
+	.rate		= 13000000,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.ops		= &clkops_null,
+	.rate		= 16800000,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.ops		= &clkops_null,
+	.rate		= 19200000,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.ops		= &clkops_null,
+	.rate		= 26000000,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.ops		= &clkops_null,
+	.rate		= 38400000,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.ops		= &clkops_null,
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.ops		= &clkops_null,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dpll4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
+	{ .div = 17, .val = 17, .flags = RATE_IN_36XX },
+	{ .div = 18, .val = 18, .flags = RATE_IN_36XX },
+	{ .div = 19, .val = 19, .flags = RATE_IN_36XX },
+	{ .div = 20, .val = 20, .flags = RATE_IN_36XX },
+	{ .div = 21, .val = 21, .flags = RATE_IN_36XX },
+	{ .div = 22, .val = 22, .flags = RATE_IN_36XX },
+	{ .div = 23, .val = 23, .flags = RATE_IN_36XX },
+	{ .div = 24, .val = 24, .flags = RATE_IN_36XX },
+	{ .div = 25, .val = 25, .flags = RATE_IN_36XX },
+	{ .div = 26, .val = 26, .flags = RATE_IN_36XX },
+	{ .div = 27, .val = 27, .flags = RATE_IN_36XX },
+	{ .div = 28, .val = 28, .flags = RATE_IN_36XX },
+	{ .div = 29, .val = 29, .flags = RATE_IN_36XX },
+	{ .div = 30, .val = 30, .flags = RATE_IN_36XX },
+	{ .div = 31, .val = 31, .flags = RATE_IN_36XX },
+	{ .div = 32, .val = 32, .flags = RATE_IN_36XX },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_ck,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.ops		= &clkops_omap3_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/* DPLL3 output M2 - primary control point for CORE speed */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap3_core_dpll_m2_set_rate,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m3x2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static struct dpll_data dpll4_dd;
+
+static struct dpll_data dpll4_dd_34xx __initdata = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct dpll_data dpll4_dd_3630 __initdata = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3630_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
+	.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE,
+	.flags		= DPLL_J_TYPE
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.ops		= &clkops_omap3_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = dpll4_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3630_DIV_96M_MASK,
+	.clksel		= dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
+
+/* Adding 192MHz Clock node needed by SGX */
+static struct clk omap_192m_alwon_fck = {
+	.name		= "omap_192m_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate omap_96m_alwon_fck_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_36XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_36XX },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_96m_alwon_fck_clksel[] = {
+	{ .parent = &omap_192m_alwon_fck, .rates = omap_96m_alwon_fck_rates },
+	{ .parent = NULL }
+};
+
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_96m_alwon_fck_3630 = {
+	.name		= "omap_96m_alwon_fck",
+	.parent		= &omap_192m_alwon_fck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3630_CLKSEL_96M_MASK,
+	.clksel		= omap_96m_alwon_fck_clksel
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
+	.clksel		= omap_96m_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
+	.clksel		= omap_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
+	.clksel		= omap_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_DSS1_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m6_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m6x2_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.ops		= &clkops_omap3_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
+	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.clkdm_name	= "core_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel_rate div4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div4_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2m2_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX What about neon_clkdm ? */
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll2_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+	.clkdm_name	= "iva2_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Common interface clocks */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
+static struct clk gfx_l3_ck = {
+	.name		= "gfx_l3_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 2, .val = 5, .flags = RATE_IN_36XX },
+	{ .div = 3, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_192m_rates[] = {
+	{ .div = 1,  .val = 4, .flags = RATE_IN_36XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_corex2_rates[] = {
+	{ .div = 3, .val = 6, .flags = RATE_IN_36XX },
+	{ .div = 5, .val = 7, .flags = RATE_IN_36XX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = &omap_192m_alwon_fck, .rates = sgx_192m_rates },
+	{ .parent = &corex2_fck, .rates = sgx_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_12m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck_3430es1 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+/*
+ * XXX must add clk_enable/clk_disable for these if standard code won't
+ * handle it
+ */
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es1 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ick,
+	.flags		= ENABLE_ON_INIT, /* huh? */
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es1 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static struct clk dss1_alwon_fck_3430es1 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es1 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m5x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+	.name		= "csi2_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "usbhost_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_3XXX },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_3XXX },
+	{ .div = 20, .val = 10, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_dbck = {
+	.name		= "gpio1_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* XXX This clock no longer exists in 3430 TRM rev F */
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_dbck = {
+	.name		= "gpio6_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_dbck = {
+	.name		= "gpio5_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_dbck = {
+	.name		= "gpio4_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_dbck = {
+	.name		= "gpio3_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_dbck = {
+	.name		= "gpio2_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+/* Clocks for AM35XX */
+static struct clk ipss_ick = {
+	.name		= "ipss_ick",
+	.ops		= &clkops_am35xx_ipss_wait,
+	.parent		= &core_l3_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= AM35XX_EN_IPSS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk emac_ick = {
+	.name		= "emac_ick",
+	.ops		= &clkops_am35xx_ipss_module_wait,
+	.parent		= &ipss_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rmii_ck = {
+	.name		= "rmii_ck",
+	.ops		= &clkops_null,
+	.rate		= 50000000,
+};
+
+static struct clk emac_fck = {
+	.name		= "emac_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &rmii_ck,
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_CPGMAC_FCLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_am35xx = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_am35xx_ipss_module_wait,
+	.parent		= &ipss_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_USBOTG_VBUSP_CLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_fck_am35xx = {
+	.name		= "hsotgusb_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_USBOTG_FCLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hecc_ck = {
+	.name		= "hecc_ck",
+	.ops		= &clkops_am35xx_ipss_module_wait,
+	.parent		= &sys_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_HECC_VBUSP_CLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vpfe_ick = {
+	.name		= "vpfe_ick",
+	.ops		= &clkops_am35xx_ipss_module_wait,
+	.parent		= &ipss_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_VPFE_VBUSP_CLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pclk_ck = {
+	.name		= "pclk_ck",
+	.ops		= &clkops_null,
+	.rate		= 27000000,
+};
+
+static struct clk vpfe_fck = {
+	.name		= "vpfe_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &pclk_ck,
+	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
+	.enable_bit	= AM35XX_VPFE_FCLK_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The UART1/2 functional clock acts as the functional
+ * clock for UART4. No separate fclk control available.
+ */
+static struct clk uart4_ick_am35xx = {
+	.name		= "uart4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= AM35XX_EN_UART4_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * clkdev
+ */
+
+/* XXX At some point we should rename this file to clock3xxx_data.c */
+static struct omap_clk omap3xxx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_3XXX),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_3XXX),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_3XXX),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_3XXX),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_3XXX),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_3XXX),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_3XXX),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_3XXX),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
+	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_3XXX),
+	CLK(NULL,	"omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_3XXX),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_3XXX),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_3XXX),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_3XXX),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
+	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_3XXX),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_3XXX),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_3XXX),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_3XXX),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
+	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_3XXX),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_3XXX),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_3XXX),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2 | CK_3517),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2 | CK_3517),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_3XXX),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_3XXX),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_3XXX),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_3XXX),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_3XXX),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_3XXX),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_3XXX),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_3XXX),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_3XXX),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_3XXX),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_3XXX),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_3XXX),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_3XXX),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_3XXX),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_3XXX),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_3XXX),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_3XXX),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2 | CK_AM35XX),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK("omap-sham",	"ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_3XXX),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_3XXX),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_3XXX),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_3XXX),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_3XXX),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_3XXX),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2 | CK_AM35XX),
+	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_3XXX),
+	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_3XXX),
+	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_3XXX),
+	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_3XXX),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_3XXX),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_3XXX),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_3XXX),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_3XXX),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_3XXX),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_3XXX),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_3XXX),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_3XXX),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_3XXX),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_3XXX),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_3XXX),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_3XXX),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_3XXX),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_3XXX),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_3XXX),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_3XXX),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_3XXX),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_3XXX),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_3XXX),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_3XXX),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_3XXX),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_3XXX),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_3XXX),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_3XXX),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_3XXX),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_3XXX),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_3XXX),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_3XXX),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_3XXX),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_3XXX),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_3XXX),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_3XXX),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_3XXX),
+	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_3XXX),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_3XXX),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_3XXX),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_3XXX),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_3XXX),
+	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
+	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
+	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
+	CLK("davinci_emac",	"emac_clk",	&emac_ick,	CK_AM35XX),
+	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
+	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
+	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
+	CLK("musb_hdrc",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
+	CLK("musb_hdrc",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
+	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
+	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
+};
+
+
+int __init omap3xxx_clk_init(void)
+{
+	struct omap_clk *c;
+	u32 cpu_clkflg = CK_3XXX;
+
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_3XXX;
+		cpu_clkflg |= CK_343X;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (omap_rev() == OMAP3430_REV_ES1_0) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CK_3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2PLUS;
+			cpu_clkflg |= CK_3430ES2;
+		}
+	} else if (cpu_is_omap3517()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3517;
+	} else if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3505;
+	}
+
+	if (omap3_has_192mhz_clk())
+		omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
+
+	if (cpu_is_omap3630()) {
+		cpu_mask |= RATE_IN_36XX;
+		cpu_clkflg |= CK_36XX;
+
+		/*
+		 * XXX This type of dynamic rewriting of the clock tree is
+		 * deprecated and should be revised soon.
+		 *
+		 * For 3630: override clkops_omap2_dflt_wait for the
+		 * clocks affected from PWRDN reset Limitation
+		 */
+		dpll3_m3x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+		dpll4_m2x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+		dpll4_m3x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+		dpll4_m4x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+		dpll4_m5x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+		dpll4_m6x2_ck.ops =
+				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+	}
+
+	/*
+	 * XXX This type of dynamic rewriting of the clock tree is
+	 * deprecated and should be revised soon.
+	 */
+	if (cpu_is_omap3630())
+		dpll4_dd = dpll4_dd_3630;
+	else
+		dpll4_dd = dpll4_dd_34xx;
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+	     c++)
+		clk_preinit(c->lk.clk);
+
+	for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
+	     c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
+		}
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/*
+	 * Lock DPLL5 and put it in autoidle.
+	 */
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
+		omap3_clk_lock_dpll5();
+
+	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
+	sdrc_ick_p = clk_get(NULL, "sdrc_ick");
+	arm_fck_p = clk_get(NULL, "arm_fck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
deleted file mode 100644
index e370868..0000000
--- a/arch/arm/mach-omap2/clock44xx.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP4-specific clock framework functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Rajendra Nayak (rnayak@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include "clock.h"
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-};
-
-void omap2_clk_prepare_for_reboot(void)
-{
-	return;
-}
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
index 59b9ced..6be1095 100644
--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -2,14 +2,19 @@
  * OMAP4 clock function prototypes and macros
  *
  * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 
-#define OMAP4430_MAX_DPLL_MULT	2048
+/*
+ * XXX Missing values for the OMAP4 DPLL_USB
+ * XXX Missing min_multiplier values for all OMAP4 DPLLs
+ */
+#define OMAP4430_MAX_DPLL_MULT	2047
 #define OMAP4430_MAX_DPLL_DIV	128
 
-extern const struct clkops clkops_noncore_dpll_ops;
+int omap4xxx_clk_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 9d882bc..e10db7a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -1,8 +1,8 @@
 /*
  * OMAP4 Clock data
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -20,7 +20,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/list.h>
 #include <linux/clk.h>
 
 #include <plat/control.h>
@@ -39,42 +39,36 @@ static struct clk extalt_clkin_ck = {
 	.name		= "extalt_clkin_ck",
 	.rate		= 59000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk pad_clks_ck = {
 	.name		= "pad_clks_ck",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk pad_slimbus_core_clks_ck = {
 	.name		= "pad_slimbus_core_clks_ck",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk secure_32k_clk_src_ck = {
 	.name		= "secure_32k_clk_src_ck",
 	.rate		= 32768,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk slimbus_clk = {
 	.name		= "slimbus_clk",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk sys_32k_ck = {
 	.name		= "sys_32k_ck",
 	.rate		= 32768,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk virt_12000000_ck = {
@@ -179,35 +173,30 @@ static struct clk sys_clkin_ck = {
 	.clksel_mask	= OMAP4430_SYS_CLKSEL_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk utmi_phy_clkout_ck = {
 	.name		= "utmi_phy_clkout_ck",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk xclk60mhsp1_ck = {
 	.name		= "xclk60mhsp1_ck",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk xclk60mhsp2_ck = {
 	.name		= "xclk60mhsp2_ck",
 	.rate		= 12000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 static struct clk xclk60motg_ck = {
 	.name		= "xclk60motg_ck",
 	.rate		= 60000000,
 	.ops		= &clkops_null,
-	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
 };
 
 /* Module clocks and DPLL outputs */
@@ -233,7 +222,6 @@ static struct clk dpll_sys_ref_clk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel abe_dpll_refclk_mux_sel[] = {
@@ -251,7 +239,6 @@ static struct clk abe_dpll_refclk_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_ABE */
@@ -279,11 +266,10 @@ static struct clk dpll_abe_ck = {
 	.parent		= &abe_dpll_refclk_mux_ck,
 	.dpll_data	= &dpll_abe_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_abe_m2x2_ck = {
@@ -291,7 +277,6 @@ static struct clk dpll_abe_m2x2_ck = {
 	.parent		= &dpll_abe_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk abe_24m_fclk = {
@@ -299,7 +284,6 @@ static struct clk abe_24m_fclk = {
 	.parent		= &dpll_abe_m2x2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div3_1to4_rates[] = {
@@ -324,7 +308,6 @@ static struct clk abe_clk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel aess_fclk_div[] = {
@@ -342,7 +325,6 @@ static struct clk aess_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
@@ -395,7 +377,6 @@ static struct clk dpll_abe_m3_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel core_hsd_byp_clk_mux_sel[] = {
@@ -413,7 +394,6 @@ static struct clk core_hsd_byp_clk_mux_ck = {
 	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_CORE */
@@ -443,7 +423,6 @@ static struct clk dpll_core_ck = {
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_null,
 	.recalc		= &omap3_dpll_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_core_m6_div[] = {
@@ -461,7 +440,6 @@ static struct clk dpll_core_m6_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dbgclk_mux_sel[] = {
@@ -475,7 +453,6 @@ static struct clk dbgclk_mux_ck = {
 	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_core_m2_ck = {
@@ -488,7 +465,6 @@ static struct clk dpll_core_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk ddrphy_ck = {
@@ -496,7 +472,6 @@ static struct clk ddrphy_ck = {
 	.parent		= &dpll_core_m2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_core_m5_ck = {
@@ -509,7 +484,6 @@ static struct clk dpll_core_m5_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel div_core_div[] = {
@@ -527,7 +501,6 @@ static struct clk div_core_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div4_1to8_rates[] = {
@@ -553,7 +526,6 @@ static struct clk div_iva_hs_clk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk div_mpu_hs_clk = {
@@ -566,7 +538,6 @@ static struct clk div_mpu_hs_clk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_core_m4_ck = {
@@ -579,7 +550,6 @@ static struct clk dpll_core_m4_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dll_clk_div_ck = {
@@ -587,7 +557,6 @@ static struct clk dll_clk_div_ck = {
 	.parent		= &dpll_core_m4_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_abe_m2_ck = {
@@ -600,7 +569,6 @@ static struct clk dpll_abe_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_core_m3_ck = {
@@ -613,7 +581,6 @@ static struct clk dpll_core_m3_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_core_m7_ck = {
@@ -626,7 +593,6 @@ static struct clk dpll_core_m7_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
@@ -640,7 +606,6 @@ static struct clk iva_hsd_byp_clk_mux_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_IVA */
@@ -668,11 +633,10 @@ static struct clk dpll_iva_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.dpll_data	= &dpll_iva_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_iva_m4_div[] = {
@@ -690,7 +654,6 @@ static struct clk dpll_iva_m4_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_iva_m5_ck = {
@@ -703,7 +666,6 @@ static struct clk dpll_iva_m5_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_MPU */
@@ -731,11 +693,10 @@ static struct clk dpll_mpu_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.dpll_data	= &dpll_mpu_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_mpu_m2_div[] = {
@@ -753,7 +714,6 @@ static struct clk dpll_mpu_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk per_hs_clk_div_ck = {
@@ -761,7 +721,6 @@ static struct clk per_hs_clk_div_ck = {
 	.parent		= &dpll_abe_m3_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel per_hsd_byp_clk_mux_sel[] = {
@@ -779,7 +738,6 @@ static struct clk per_hsd_byp_clk_mux_ck = {
 	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_PER */
@@ -807,11 +765,10 @@ static struct clk dpll_per_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.dpll_data	= &dpll_per_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_per_m2_div[] = {
@@ -829,7 +786,6 @@ static struct clk dpll_per_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m2x2_ck = {
@@ -837,7 +793,6 @@ static struct clk dpll_per_m2x2_ck = {
 	.parent		= &dpll_per_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m3_ck = {
@@ -850,7 +805,6 @@ static struct clk dpll_per_m3_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m4_ck = {
@@ -863,7 +817,6 @@ static struct clk dpll_per_m4_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m5_ck = {
@@ -876,7 +829,6 @@ static struct clk dpll_per_m5_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m6_ck = {
@@ -889,7 +841,6 @@ static struct clk dpll_per_m6_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_per_m7_ck = {
@@ -902,7 +853,6 @@ static struct clk dpll_per_m7_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_UNIPRO */
@@ -930,11 +880,10 @@ static struct clk dpll_unipro_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.dpll_data	= &dpll_unipro_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_unipro_m2x2_div[] = {
@@ -952,7 +901,6 @@ static struct clk dpll_unipro_m2x2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk usb_hs_clk_div_ck = {
@@ -960,7 +908,6 @@ static struct clk usb_hs_clk_div_ck = {
 	.parent		= &dpll_abe_m3_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* DPLL_USB */
@@ -980,6 +927,7 @@ static struct dpll_data dpll_usb_dd = {
 	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
 	.max_divider	= OMAP4430_MAX_DPLL_DIV,
 	.min_divider	= 1,
+	.flags		= DPLL_J_TYPE | DPLL_NO_DCO_SEL
 };
 
 
@@ -988,11 +936,10 @@ static struct clk dpll_usb_ck = {
 	.parent		= &dpll_sys_ref_clk,
 	.dpll_data	= &dpll_usb_dd,
 	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_noncore_dpll_ops,
+	.ops		= &clkops_omap3_noncore_dpll_ops,
 	.recalc		= &omap3_dpll_recalc,
 	.round_rate	= &omap2_dpll_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk dpll_usb_clkdcoldo_ck = {
@@ -1000,7 +947,6 @@ static struct clk dpll_usb_clkdcoldo_ck = {
 	.parent		= &dpll_usb_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel dpll_usb_m2_div[] = {
@@ -1018,7 +964,6 @@ static struct clk dpll_usb_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel ducati_clk_mux_sel[] = {
@@ -1036,7 +981,6 @@ static struct clk ducati_clk_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk func_12m_fclk = {
@@ -1044,7 +988,6 @@ static struct clk func_12m_fclk = {
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk func_24m_clk = {
@@ -1052,7 +995,6 @@ static struct clk func_24m_clk = {
 	.parent		= &dpll_per_m2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk func_24mc_fclk = {
@@ -1060,7 +1002,6 @@ static struct clk func_24mc_fclk = {
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div2_4to8_rates[] = {
@@ -1084,7 +1025,6 @@ static struct clk func_48m_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk func_48mc_fclk = {
@@ -1092,7 +1032,6 @@ static struct clk func_48mc_fclk = {
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div2_2to4_rates[] = {
@@ -1116,7 +1055,6 @@ static struct clk func_64m_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_96m_fclk_div[] = {
@@ -1134,7 +1072,6 @@ static struct clk func_96m_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel hsmmc6_fclk_sel[] = {
@@ -1148,7 +1085,6 @@ static struct clk hsmmc6_fclk = {
 	.parent		= &func_64m_fclk,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div2_1to8_rates[] = {
@@ -1172,7 +1108,6 @@ static struct clk init_60m_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel l3_div_div[] = {
@@ -1190,7 +1125,6 @@ static struct clk l3_div_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel l4_div_div[] = {
@@ -1208,7 +1142,6 @@ static struct clk l4_div_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk lp_clk_div_ck = {
@@ -1216,7 +1149,6 @@ static struct clk lp_clk_div_ck = {
 	.parent		= &dpll_abe_m2x2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel l4_wkup_clk_mux_sel[] = {
@@ -1234,7 +1166,6 @@ static struct clk l4_wkup_clk_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel per_abe_nc_fclk_div[] = {
@@ -1252,7 +1183,6 @@ static struct clk per_abe_nc_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel mcasp2_fclk_sel[] = {
@@ -1266,7 +1196,6 @@ static struct clk mcasp2_fclk = {
 	.parent		= &func_96m_fclk,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk mcasp3_fclk = {
@@ -1274,7 +1203,6 @@ static struct clk mcasp3_fclk = {
 	.parent		= &func_96m_fclk,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk ocp_abe_iclk = {
@@ -1282,7 +1210,6 @@ static struct clk ocp_abe_iclk = {
 	.parent		= &aess_fclk,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk per_abe_24m_fclk = {
@@ -1290,7 +1217,6 @@ static struct clk per_abe_24m_fclk = {
 	.parent		= &dpll_abe_m2_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel pmd_stm_clock_mux_sel[] = {
@@ -1305,7 +1231,6 @@ static struct clk pmd_stm_clock_mux_ck = {
 	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk pmd_trace_clk_mux_ck = {
@@ -1313,7 +1238,6 @@ static struct clk pmd_trace_clk_mux_ck = {
 	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static struct clk syc_clk_div_ck = {
@@ -1326,13 +1250,12 @@ static struct clk syc_clk_div_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /* Leaf clocks controlled by modules */
 
-static struct clk aes1_ck = {
-	.name		= "aes1_ck",
+static struct clk aes1_fck = {
+	.name		= "aes1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_AES1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1341,8 +1264,8 @@ static struct clk aes1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk aes2_ck = {
-	.name		= "aes2_ck",
+static struct clk aes2_fck = {
+	.name		= "aes2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_AES2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1351,8 +1274,8 @@ static struct clk aes2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk aess_ck = {
-	.name		= "aess_ck",
+static struct clk aess_fck = {
+	.name		= "aess_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1361,8 +1284,8 @@ static struct clk aess_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk cust_efuse_ck = {
-	.name		= "cust_efuse_ck",
+static struct clk cust_efuse_fck = {
+	.name		= "cust_efuse_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1371,8 +1294,8 @@ static struct clk cust_efuse_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk des3des_ck = {
-	.name		= "des3des_ck",
+static struct clk des3des_fck = {
+	.name		= "des3des_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1397,7 +1320,6 @@ static struct clk dmic_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_dmic_abe_gfclk_sel[] = {
@@ -1407,9 +1329,9 @@ static const struct clksel func_dmic_abe_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged func_dmic_abe_gfclk into dmic_ck */
-static struct clk dmic_ck = {
-	.name		= "dmic_ck",
+/* Merged func_dmic_abe_gfclk into dmic */
+static struct clk dmic_fck = {
+	.name		= "dmic_fck",
 	.parent		= &dmic_sync_mux_ck,
 	.clksel		= func_dmic_abe_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1417,14 +1339,13 @@ static struct clk dmic_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
 };
 
-static struct clk dss_ck = {
-	.name		= "dss_ck",
+static struct clk dss_fck = {
+	.name		= "dss_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1433,8 +1354,8 @@ static struct clk dss_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ducati_ck = {
-	.name		= "ducati_ck",
+static struct clk ducati_ick = {
+	.name		= "ducati_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1443,21 +1364,23 @@ static struct clk ducati_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk emif1_ck = {
-	.name		= "emif1_ck",
+static struct clk emif1_ick = {
+	.name		= "emif1_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk emif2_ck = {
-	.name		= "emif2_ck",
+static struct clk emif2_ick = {
+	.name		= "emif2_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1468,9 +1391,9 @@ static const struct clksel fdif_fclk_div[] = {
 	{ .parent = NULL },
 };
 
-/* Merged fdif_fclk into fdif_ck */
-static struct clk fdif_ck = {
-	.name		= "fdif_ck",
+/* Merged fdif_fclk into fdif */
+static struct clk fdif_fck = {
+	.name		= "fdif_fck",
 	.parent		= &dpll_per_m4_ck,
 	.clksel		= fdif_fclk_div,
 	.clksel_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
@@ -1479,7 +1402,6 @@ static struct clk fdif_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "iss_clkdm",
@@ -1500,7 +1422,6 @@ static struct clk per_sgx_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel sgx_clk_mux_sel[] = {
@@ -1509,9 +1430,9 @@ static const struct clksel sgx_clk_mux_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged sgx_clk_mux into gfx_ck */
-static struct clk gfx_ck = {
-	.name		= "gfx_ck",
+/* Merged sgx_clk_mux into gfx */
+static struct clk gfx_fck = {
+	.name		= "gfx_fck",
 	.parent		= &dpll_core_m7_ck,
 	.clksel		= sgx_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1519,14 +1440,13 @@ static struct clk gfx_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l3_gfx_clkdm",
 };
 
-static struct clk gpio1_ck = {
-	.name		= "gpio1_ck",
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1535,8 +1455,8 @@ static struct clk gpio1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio2_ck = {
-	.name		= "gpio2_ck",
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1545,8 +1465,8 @@ static struct clk gpio2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio3_ck = {
-	.name		= "gpio3_ck",
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1555,8 +1475,8 @@ static struct clk gpio3_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio4_ck = {
-	.name		= "gpio4_ck",
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1565,8 +1485,8 @@ static struct clk gpio4_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio5_ck = {
-	.name		= "gpio5_ck",
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1575,8 +1495,8 @@ static struct clk gpio5_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpio6_ck = {
-	.name		= "gpio6_ck",
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1585,8 +1505,8 @@ static struct clk gpio6_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk gpmc_ck = {
-	.name		= "gpmc_ck",
+static struct clk gpmc_ick = {
+	.name		= "gpmc_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3_2_GPMC_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1601,9 +1521,12 @@ static const struct clksel dmt1_clk_mux_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged dmt1_clk_mux into gptimer1_ck */
-static struct clk gptimer1_ck = {
-	.name		= "gptimer1_ck",
+/*
+ * Merged dmt1_clk_mux into gptimer1
+ * gptimer1 renamed temporarily into gpt1 to match OMAP3 convention
+ */
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1611,15 +1534,17 @@ static struct clk gptimer1_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_wkup_clkdm",
 };
 
-/* Merged cm2_dm10_mux into gptimer10_ck */
-static struct clk gptimer10_ck = {
-	.name		= "gptimer10_ck",
+/*
+ * Merged cm2_dm10_mux into gptimer10
+ * gptimer10 renamed temporarily into gpt10 to match OMAP3 convention
+ */
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1627,15 +1552,17 @@ static struct clk gptimer10_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-/* Merged cm2_dm11_mux into gptimer11_ck */
-static struct clk gptimer11_ck = {
-	.name		= "gptimer11_ck",
+/*
+ * Merged cm2_dm11_mux into gptimer11
+ * gptimer11 renamed temporarily into gpt11 to match OMAP3 convention
+ */
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1643,15 +1570,17 @@ static struct clk gptimer11_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-/* Merged cm2_dm2_mux into gptimer2_ck */
-static struct clk gptimer2_ck = {
-	.name		= "gptimer2_ck",
+/*
+ * Merged cm2_dm2_mux into gptimer2
+ * gptimer2 renamed temporarily into gpt2 to match OMAP3 convention
+ */
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1659,15 +1588,17 @@ static struct clk gptimer2_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-/* Merged cm2_dm3_mux into gptimer3_ck */
-static struct clk gptimer3_ck = {
-	.name		= "gptimer3_ck",
+/*
+ * Merged cm2_dm3_mux into gptimer3
+ * gptimer3 renamed temporarily into gpt3 to match OMAP3 convention
+ */
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1675,15 +1606,17 @@ static struct clk gptimer3_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-/* Merged cm2_dm4_mux into gptimer4_ck */
-static struct clk gptimer4_ck = {
-	.name		= "gptimer4_ck",
+/*
+ * Merged cm2_dm4_mux into gptimer4
+ * gptimer4 renamed temporarily into gpt4 to match OMAP3 convention
+ */
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1691,7 +1624,6 @@ static struct clk gptimer4_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
@@ -1703,9 +1635,12 @@ static const struct clksel timer5_sync_mux_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged timer5_sync_mux into gptimer5_ck */
-static struct clk gptimer5_ck = {
-	.name		= "gptimer5_ck",
+/*
+ * Merged timer5_sync_mux into gptimer5
+ * gptimer5 renamed temporarily into gpt5 to match OMAP3 convention
+ */
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
 	.parent		= &syc_clk_div_ck,
 	.clksel		= timer5_sync_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1713,15 +1648,17 @@ static struct clk gptimer5_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
 };
 
-/* Merged timer6_sync_mux into gptimer6_ck */
-static struct clk gptimer6_ck = {
-	.name		= "gptimer6_ck",
+/*
+ * Merged timer6_sync_mux into gptimer6
+ * gptimer6 renamed temporarily into gpt6 to match OMAP3 convention
+ */
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
 	.parent		= &syc_clk_div_ck,
 	.clksel		= timer5_sync_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1729,15 +1666,17 @@ static struct clk gptimer6_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
 };
 
-/* Merged timer7_sync_mux into gptimer7_ck */
-static struct clk gptimer7_ck = {
-	.name		= "gptimer7_ck",
+/*
+ * Merged timer7_sync_mux into gptimer7
+ * gptimer7 renamed temporarily into gpt7 to match OMAP3 convention
+ */
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
 	.parent		= &syc_clk_div_ck,
 	.clksel		= timer5_sync_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1745,15 +1684,17 @@ static struct clk gptimer7_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
 };
 
-/* Merged timer8_sync_mux into gptimer8_ck */
-static struct clk gptimer8_ck = {
-	.name		= "gptimer8_ck",
+/*
+ * Merged timer8_sync_mux into gptimer8
+ * gptimer8 renamed temporarily into gpt8 to match OMAP3 convention
+ */
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
 	.parent		= &syc_clk_div_ck,
 	.clksel		= timer5_sync_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1761,15 +1702,17 @@ static struct clk gptimer8_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
 };
 
-/* Merged cm2_dm9_mux into gptimer9_ck */
-static struct clk gptimer9_ck = {
-	.name		= "gptimer9_ck",
+/*
+ * Merged cm2_dm9_mux into gptimer9
+ * gptimer9 renamed temporarily into gpt9 to match OMAP3 convention
+ */
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
 	.parent		= &sys_clkin_ck,
 	.clksel		= dmt1_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1777,14 +1720,13 @@ static struct clk gptimer9_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-static struct clk hdq1w_ck = {
-	.name		= "hdq1w_ck",
+static struct clk hdq1w_fck = {
+	.name		= "hdq1w_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1793,9 +1735,9 @@ static struct clk hdq1w_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-/* Merged hsi_fclk into hsi_ck */
-static struct clk hsi_ck = {
-	.name		= "hsi_ck",
+/* Merged hsi_fclk into hsi */
+static struct clk hsi_ick = {
+	.name		= "hsi_ick",
 	.parent		= &dpll_per_m2x2_ck,
 	.clksel		= per_sgx_fclk_div,
 	.clksel_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
@@ -1804,14 +1746,13 @@ static struct clk hsi_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "l3_init_clkdm",
 };
 
-static struct clk i2c1_ck = {
-	.name		= "i2c1_ck",
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_I2C1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1820,8 +1761,8 @@ static struct clk i2c1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk i2c2_ck = {
-	.name		= "i2c2_ck",
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_I2C2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1830,8 +1771,8 @@ static struct clk i2c2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk i2c3_ck = {
-	.name		= "i2c3_ck",
+static struct clk i2c3_fck = {
+	.name		= "i2c3_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_I2C3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1840,8 +1781,8 @@ static struct clk i2c3_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk i2c4_ck = {
-	.name		= "i2c4_ck",
+static struct clk i2c4_fck = {
+	.name		= "i2c4_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_I2C4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1850,8 +1791,8 @@ static struct clk i2c4_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk iss_ck = {
-	.name		= "iss_ck",
+static struct clk iss_fck = {
+	.name		= "iss_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1860,8 +1801,8 @@ static struct clk iss_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ivahd_ck = {
-	.name		= "ivahd_ck",
+static struct clk ivahd_ick = {
+	.name		= "ivahd_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1870,8 +1811,8 @@ static struct clk ivahd_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk keyboard_ck = {
-	.name		= "keyboard_ck",
+static struct clk keyboard_fck = {
+	.name		= "keyboard_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1880,8 +1821,8 @@ static struct clk keyboard_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk l3_instr_interconnect_ck = {
-	.name		= "l3_instr_interconnect_ck",
+static struct clk l3_instr_interconnect_ick = {
+	.name		= "l3_instr_interconnect_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1890,8 +1831,8 @@ static struct clk l3_instr_interconnect_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk l3_interconnect_3_ck = {
-	.name		= "l3_interconnect_3_ck",
+static struct clk l3_interconnect_3_ick = {
+	.name		= "l3_interconnect_3_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1909,7 +1850,6 @@ static struct clk mcasp_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_mcasp_abe_gfclk_sel[] = {
@@ -1919,9 +1859,9 @@ static const struct clksel func_mcasp_abe_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged func_mcasp_abe_gfclk into mcasp_ck */
-static struct clk mcasp_ck = {
-	.name		= "mcasp_ck",
+/* Merged func_mcasp_abe_gfclk into mcasp */
+static struct clk mcasp_fck = {
+	.name		= "mcasp_fck",
 	.parent		= &mcasp_sync_mux_ck,
 	.clksel		= func_mcasp_abe_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1929,7 +1869,6 @@ static struct clk mcasp_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
@@ -1944,7 +1883,6 @@ static struct clk mcbsp1_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_mcbsp1_gfclk_sel[] = {
@@ -1954,9 +1892,9 @@ static const struct clksel func_mcbsp1_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged func_mcbsp1_gfclk into mcbsp1_ck */
-static struct clk mcbsp1_ck = {
-	.name		= "mcbsp1_ck",
+/* Merged func_mcbsp1_gfclk into mcbsp1 */
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
 	.parent		= &mcbsp1_sync_mux_ck,
 	.clksel		= func_mcbsp1_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1964,7 +1902,6 @@ static struct clk mcbsp1_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
@@ -1979,7 +1916,6 @@ static struct clk mcbsp2_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_mcbsp2_gfclk_sel[] = {
@@ -1989,9 +1925,9 @@ static const struct clksel func_mcbsp2_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged func_mcbsp2_gfclk into mcbsp2_ck */
-static struct clk mcbsp2_ck = {
-	.name		= "mcbsp2_ck",
+/* Merged func_mcbsp2_gfclk into mcbsp2 */
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
 	.parent		= &mcbsp2_sync_mux_ck,
 	.clksel		= func_mcbsp2_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -1999,7 +1935,6 @@ static struct clk mcbsp2_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
@@ -2014,7 +1949,6 @@ static struct clk mcbsp3_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel func_mcbsp3_gfclk_sel[] = {
@@ -2024,9 +1958,9 @@ static const struct clksel func_mcbsp3_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged func_mcbsp3_gfclk into mcbsp3_ck */
-static struct clk mcbsp3_ck = {
-	.name		= "mcbsp3_ck",
+/* Merged func_mcbsp3_gfclk into mcbsp3 */
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
 	.parent		= &mcbsp3_sync_mux_ck,
 	.clksel		= func_mcbsp3_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -2034,7 +1968,6 @@ static struct clk mcbsp3_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "abe_clkdm",
@@ -2049,7 +1982,6 @@ static struct clk mcbsp4_sync_mux_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel per_mcbsp4_gfclk_sel[] = {
@@ -2058,9 +1990,9 @@ static const struct clksel per_mcbsp4_gfclk_sel[] = {
 	{ .parent = NULL },
 };
 
-/* Merged per_mcbsp4_gfclk into mcbsp4_ck */
-static struct clk mcbsp4_ck = {
-	.name		= "mcbsp4_ck",
+/* Merged per_mcbsp4_gfclk into mcbsp4 */
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
 	.parent		= &mcbsp4_sync_mux_ck,
 	.clksel		= per_mcbsp4_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -2068,14 +2000,13 @@ static struct clk mcbsp4_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_24_24_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l4_per_clkdm",
 };
 
-static struct clk mcspi1_ck = {
-	.name		= "mcspi1_ck",
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2084,8 +2015,8 @@ static struct clk mcspi1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk mcspi2_ck = {
-	.name		= "mcspi2_ck",
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2094,8 +2025,8 @@ static struct clk mcspi2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk mcspi3_ck = {
-	.name		= "mcspi3_ck",
+static struct clk mcspi3_fck = {
+	.name		= "mcspi3_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2104,8 +2035,8 @@ static struct clk mcspi3_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk mcspi4_ck = {
-	.name		= "mcspi4_ck",
+static struct clk mcspi4_fck = {
+	.name		= "mcspi4_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2114,9 +2045,9 @@ static struct clk mcspi4_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-/* Merged hsmmc1_fclk into mmc1_ck */
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
+/* Merged hsmmc1_fclk into mmc1 */
+static struct clk mmc1_fck = {
+	.name		= "mmc1_fck",
 	.parent		= &func_64m_fclk,
 	.clksel		= hsmmc6_fclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -2124,15 +2055,14 @@ static struct clk mmc1_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l3_init_clkdm",
 };
 
-/* Merged hsmmc2_fclk into mmc2_ck */
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
+/* Merged hsmmc2_fclk into mmc2 */
+static struct clk mmc2_fck = {
+	.name		= "mmc2_fck",
 	.parent		= &func_64m_fclk,
 	.clksel		= hsmmc6_fclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -2140,14 +2070,13 @@ static struct clk mmc2_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 	.enable_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l3_init_clkdm",
 };
 
-static struct clk mmc3_ck = {
-	.name		= "mmc3_ck",
+static struct clk mmc3_fck = {
+	.name		= "mmc3_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2156,8 +2085,8 @@ static struct clk mmc3_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk mmc4_ck = {
-	.name		= "mmc4_ck",
+static struct clk mmc4_fck = {
+	.name		= "mmc4_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2166,8 +2095,8 @@ static struct clk mmc4_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk mmc5_ck = {
-	.name		= "mmc5_ck",
+static struct clk mmc5_fck = {
+	.name		= "mmc5_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2176,8 +2105,8 @@ static struct clk mmc5_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ocp_wp1_ck = {
-	.name		= "ocp_wp1_ck",
+static struct clk ocp_wp1_ick = {
+	.name		= "ocp_wp1_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2186,8 +2115,8 @@ static struct clk ocp_wp1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk pdm_ck = {
-	.name		= "pdm_ck",
+static struct clk pdm_fck = {
+	.name		= "pdm_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2196,8 +2125,8 @@ static struct clk pdm_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk pkaeip29_ck = {
-	.name		= "pkaeip29_ck",
+static struct clk pkaeip29_fck = {
+	.name		= "pkaeip29_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2206,8 +2135,8 @@ static struct clk pkaeip29_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk rng_ck = {
-	.name		= "rng_ck",
+static struct clk rng_ick = {
+	.name		= "rng_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_RNG_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2216,8 +2145,8 @@ static struct clk rng_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sha2md51_ck = {
-	.name		= "sha2md51_ck",
+static struct clk sha2md51_fck = {
+	.name		= "sha2md51_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2226,8 +2155,8 @@ static struct clk sha2md51_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sl2_ck = {
-	.name		= "sl2_ck",
+static struct clk sl2_ick = {
+	.name		= "sl2_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2236,8 +2165,8 @@ static struct clk sl2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk slimbus1_ck = {
-	.name		= "slimbus1_ck",
+static struct clk slimbus1_fck = {
+	.name		= "slimbus1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2246,8 +2175,8 @@ static struct clk slimbus1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk slimbus2_ck = {
-	.name		= "slimbus2_ck",
+static struct clk slimbus2_fck = {
+	.name		= "slimbus2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2256,8 +2185,8 @@ static struct clk slimbus2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_core_ck = {
-	.name		= "sr_core_ck",
+static struct clk sr_core_fck = {
+	.name		= "sr_core_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2266,8 +2195,8 @@ static struct clk sr_core_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_iva_ck = {
-	.name		= "sr_iva_ck",
+static struct clk sr_iva_fck = {
+	.name		= "sr_iva_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2276,8 +2205,8 @@ static struct clk sr_iva_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_mpu_ck = {
-	.name		= "sr_mpu_ck",
+static struct clk sr_mpu_fck = {
+	.name		= "sr_mpu_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2286,8 +2215,8 @@ static struct clk sr_mpu_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk tesla_ck = {
-	.name		= "tesla_ck",
+static struct clk tesla_ick = {
+	.name		= "tesla_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2296,8 +2225,8 @@ static struct clk tesla_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk uart1_ck = {
-	.name		= "uart1_ck",
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_UART1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2306,8 +2235,8 @@ static struct clk uart1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_UART2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2316,8 +2245,8 @@ static struct clk uart2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk uart3_ck = {
-	.name		= "uart3_ck",
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_UART3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2326,8 +2255,8 @@ static struct clk uart3_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk uart4_ck = {
-	.name		= "uart4_ck",
+static struct clk uart4_fck = {
+	.name		= "uart4_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4PER_UART4_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2336,8 +2265,8 @@ static struct clk uart4_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk unipro1_ck = {
-	.name		= "unipro1_ck",
+static struct clk unipro1_fck = {
+	.name		= "unipro1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2346,8 +2275,8 @@ static struct clk unipro1_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_host_ck = {
-	.name		= "usb_host_ck",
+static struct clk usb_host_fck = {
+	.name		= "usb_host_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2356,8 +2285,8 @@ static struct clk usb_host_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_host_fs_ck = {
-	.name		= "usb_host_fs_ck",
+static struct clk usb_host_fs_fck = {
+	.name		= "usb_host_fs_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2366,8 +2295,8 @@ static struct clk usb_host_fs_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_otg_ck = {
-	.name		= "usb_otg_ck",
+static struct clk usb_otg_ick = {
+	.name		= "usb_otg_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2376,8 +2305,8 @@ static struct clk usb_otg_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_tll_ck = {
-	.name		= "usb_tll_ck",
+static struct clk usb_tll_ick = {
+	.name		= "usb_tll_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2386,8 +2315,8 @@ static struct clk usb_tll_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usbphyocp2scp_ck = {
-	.name		= "usbphyocp2scp_ck",
+static struct clk usbphyocp2scp_ick = {
+	.name		= "usbphyocp2scp_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2396,8 +2325,8 @@ static struct clk usbphyocp2scp_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usim_ck = {
-	.name		= "usim_ck",
+static struct clk usim_fck = {
+	.name		= "usim_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2406,8 +2335,8 @@ static struct clk usim_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk wdt2_ck = {
-	.name		= "wdt2_ck",
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2416,8 +2345,8 @@ static struct clk wdt2_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk wdt3_ck = {
-	.name		= "wdt3_ck",
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2442,7 +2371,6 @@ static struct clk otg_60m_gfclk_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_60M_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel stm_clk_div_div[] = {
@@ -2460,7 +2388,6 @@ static struct clk stm_clk_div_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel trace_clk_div_div[] = {
@@ -2478,7 +2405,6 @@ static struct clk trace_clk_div_ck = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel_rate div2_14to18_rates[] = {
@@ -2502,7 +2428,6 @@ static struct clk usim_fclk = {
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel utmi_p1_gfclk_sel[] = {
@@ -2520,7 +2445,6 @@ static struct clk utmi_p1_gfclk_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 static const struct clksel utmi_p2_gfclk_sel[] = {
@@ -2538,7 +2462,6 @@ static struct clk utmi_p2_gfclk_ck = {
 	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
-	.flags		= CLOCK_IN_OMAP4430,
 };
 
 /*
@@ -2631,106 +2554,144 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck,	CK_443X),
 	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck,	CK_443X),
-	CLK(NULL,	"aes1_ck",			&aes1_ck,	CK_443X),
-	CLK(NULL,	"aes2_ck",			&aes2_ck,	CK_443X),
-	CLK(NULL,	"aess_ck",			&aess_ck,	CK_443X),
-	CLK(NULL,	"cust_efuse_ck",		&cust_efuse_ck,	CK_443X),
-	CLK(NULL,	"des3des_ck",			&des3des_ck,	CK_443X),
+	CLK(NULL,	"aes1_fck",			&aes1_fck,	CK_443X),
+	CLK(NULL,	"aes2_fck",			&aes2_fck,	CK_443X),
+	CLK(NULL,	"aess_fck",			&aess_fck,	CK_443X),
+	CLK(NULL,	"cust_efuse_fck",		&cust_efuse_fck,	CK_443X),
+	CLK(NULL,	"des3des_fck",			&des3des_fck,	CK_443X),
 	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"dmic_ck",			&dmic_ck,	CK_443X),
-	CLK(NULL,	"dss_ck",			&dss_ck,	CK_443X),
-	CLK(NULL,	"ducati_ck",			&ducati_ck,	CK_443X),
-	CLK(NULL,	"emif1_ck",			&emif1_ck,	CK_443X),
-	CLK(NULL,	"emif2_ck",			&emif2_ck,	CK_443X),
-	CLK(NULL,	"fdif_ck",			&fdif_ck,	CK_443X),
+	CLK(NULL,	"dmic_fck",			&dmic_fck,	CK_443X),
+	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
+	CLK(NULL,	"ducati_ick",			&ducati_ick,	CK_443X),
+	CLK(NULL,	"emif1_ick",			&emif1_ick,	CK_443X),
+	CLK(NULL,	"emif2_ick",			&emif2_ick,	CK_443X),
+	CLK(NULL,	"fdif_fck",			&fdif_fck,	CK_443X),
 	CLK(NULL,	"per_sgx_fclk",			&per_sgx_fclk,	CK_443X),
-	CLK(NULL,	"gfx_ck",			&gfx_ck,	CK_443X),
-	CLK(NULL,	"gpio1_ck",			&gpio1_ck,	CK_443X),
-	CLK(NULL,	"gpio2_ck",			&gpio2_ck,	CK_443X),
-	CLK(NULL,	"gpio3_ck",			&gpio3_ck,	CK_443X),
-	CLK(NULL,	"gpio4_ck",			&gpio4_ck,	CK_443X),
-	CLK(NULL,	"gpio5_ck",			&gpio5_ck,	CK_443X),
-	CLK(NULL,	"gpio6_ck",			&gpio6_ck,	CK_443X),
-	CLK(NULL,	"gpmc_ck",			&gpmc_ck,	CK_443X),
-	CLK(NULL,	"gptimer1_ck",			&gptimer1_ck,	CK_443X),
-	CLK(NULL,	"gptimer10_ck",			&gptimer10_ck,	CK_443X),
-	CLK(NULL,	"gptimer11_ck",			&gptimer11_ck,	CK_443X),
-	CLK(NULL,	"gptimer2_ck",			&gptimer2_ck,	CK_443X),
-	CLK(NULL,	"gptimer3_ck",			&gptimer3_ck,	CK_443X),
-	CLK(NULL,	"gptimer4_ck",			&gptimer4_ck,	CK_443X),
-	CLK(NULL,	"gptimer5_ck",			&gptimer5_ck,	CK_443X),
-	CLK(NULL,	"gptimer6_ck",			&gptimer6_ck,	CK_443X),
-	CLK(NULL,	"gptimer7_ck",			&gptimer7_ck,	CK_443X),
-	CLK(NULL,	"gptimer8_ck",			&gptimer8_ck,	CK_443X),
-	CLK(NULL,	"gptimer9_ck",			&gptimer9_ck,	CK_443X),
-	CLK("omap2_hdq.0",	"ick",				&hdq1w_ck,	CK_443X),
-	CLK(NULL,	"hsi_ck",			&hsi_ck,	CK_443X),
-	CLK("i2c_omap.1",	"ick",				&i2c1_ck,	CK_443X),
-	CLK("i2c_omap.2",	"ick",				&i2c2_ck,	CK_443X),
-	CLK("i2c_omap.3",	"ick",				&i2c3_ck,	CK_443X),
-	CLK("i2c_omap.4",	"ick",				&i2c4_ck,	CK_443X),
-	CLK(NULL,	"iss_ck",			&iss_ck,	CK_443X),
-	CLK(NULL,	"ivahd_ck",			&ivahd_ck,	CK_443X),
-	CLK(NULL,	"keyboard_ck",			&keyboard_ck,	CK_443X),
-	CLK(NULL,	"l3_instr_interconnect_ck",	&l3_instr_interconnect_ck,	CK_443X),
-	CLK(NULL,	"l3_interconnect_3_ck",		&l3_interconnect_3_ck,	CK_443X),
+	CLK(NULL,	"gfx_fck",			&gfx_fck,	CK_443X),
+	CLK(NULL,	"gpio1_ick",			&gpio1_ick,	CK_443X),
+	CLK(NULL,	"gpio2_ick",			&gpio2_ick,	CK_443X),
+	CLK(NULL,	"gpio3_ick",			&gpio3_ick,	CK_443X),
+	CLK(NULL,	"gpio4_ick",			&gpio4_ick,	CK_443X),
+	CLK(NULL,	"gpio5_ick",			&gpio5_ick,	CK_443X),
+	CLK(NULL,	"gpio6_ick",			&gpio6_ick,	CK_443X),
+	CLK(NULL,	"gpmc_ick",			&gpmc_ick,	CK_443X),
+	CLK(NULL,	"gpt1_fck",			&gpt1_fck,	CK_443X),
+	CLK(NULL,	"gpt10_fck",			&gpt10_fck,	CK_443X),
+	CLK(NULL,	"gpt11_fck",			&gpt11_fck,	CK_443X),
+	CLK(NULL,	"gpt2_fck",			&gpt2_fck,	CK_443X),
+	CLK(NULL,	"gpt3_fck",			&gpt3_fck,	CK_443X),
+	CLK(NULL,	"gpt4_fck",			&gpt4_fck,	CK_443X),
+	CLK(NULL,	"gpt5_fck",			&gpt5_fck,	CK_443X),
+	CLK(NULL,	"gpt6_fck",			&gpt6_fck,	CK_443X),
+	CLK(NULL,	"gpt7_fck",			&gpt7_fck,	CK_443X),
+	CLK(NULL,	"gpt8_fck",			&gpt8_fck,	CK_443X),
+	CLK(NULL,	"gpt9_fck",			&gpt9_fck,	CK_443X),
+	CLK("omap2_hdq.0",	"fck",				&hdq1w_fck,	CK_443X),
+	CLK(NULL,	"hsi_ick",			&hsi_ick,	CK_443X),
+	CLK("i2c_omap.1",	"fck",				&i2c1_fck,	CK_443X),
+	CLK("i2c_omap.2",	"fck",				&i2c2_fck,	CK_443X),
+	CLK("i2c_omap.3",	"fck",				&i2c3_fck,	CK_443X),
+	CLK("i2c_omap.4",	"fck",				&i2c4_fck,	CK_443X),
+	CLK(NULL,	"iss_fck",			&iss_fck,	CK_443X),
+	CLK(NULL,	"ivahd_ick",			&ivahd_ick,	CK_443X),
+	CLK(NULL,	"keyboard_fck",			&keyboard_fck,	CK_443X),
+	CLK(NULL,	"l3_instr_interconnect_ick",	&l3_instr_interconnect_ick,	CK_443X),
+	CLK(NULL,	"l3_interconnect_3_ick",	&l3_interconnect_3_ick,	CK_443X),
 	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcasp_ck",			&mcasp_ck,	CK_443X),
+	CLK(NULL,	"mcasp_fck",			&mcasp_fck,	CK_443X),
 	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck,	CK_443X),
-	CLK("omap-mcbsp.1",	"fck",				&mcbsp1_ck,	CK_443X),
+	CLK("omap-mcbsp.1",	"fck",				&mcbsp1_fck,	CK_443X),
 	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck,	CK_443X),
-	CLK("omap-mcbsp.2",	"fck",				&mcbsp2_ck,	CK_443X),
+	CLK("omap-mcbsp.2",	"fck",				&mcbsp2_fck,	CK_443X),
 	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck,	CK_443X),
-	CLK("omap-mcbsp.3",	"fck",				&mcbsp3_ck,	CK_443X),
+	CLK("omap-mcbsp.3",	"fck",				&mcbsp3_fck,	CK_443X),
 	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck,	CK_443X),
-	CLK("omap-mcbsp.4",	"fck",				&mcbsp4_ck,	CK_443X),
-	CLK("omap2_mcspi.1",	"fck",				&mcspi1_ck,	CK_443X),
-	CLK("omap2_mcspi.2",	"fck",				&mcspi2_ck,	CK_443X),
-	CLK("omap2_mcspi.3",	"fck",				&mcspi3_ck,	CK_443X),
-	CLK("omap2_mcspi.4",	"fck",				&mcspi4_ck,	CK_443X),
-	CLK("mmci-omap-hs.0",	"fck",				&mmc1_ck,	CK_443X),
-	CLK("mmci-omap-hs.1",	"fck",				&mmc2_ck,	CK_443X),
-	CLK("mmci-omap-hs.2",	"fck",				&mmc3_ck,	CK_443X),
-	CLK("mmci-omap-hs.3",	"fck",				&mmc4_ck,	CK_443X),
-	CLK("mmci-omap-hs.4",	"fck",				&mmc5_ck,	CK_443X),
-	CLK(NULL,	"ocp_wp1_ck",			&ocp_wp1_ck,	CK_443X),
-	CLK(NULL,	"pdm_ck",			&pdm_ck,	CK_443X),
-	CLK(NULL,	"pkaeip29_ck",			&pkaeip29_ck,	CK_443X),
-	CLK("omap_rng",	"ick",				&rng_ck,	CK_443X),
-	CLK(NULL,	"sha2md51_ck",			&sha2md51_ck,	CK_443X),
-	CLK(NULL,	"sl2_ck",			&sl2_ck,	CK_443X),
-	CLK(NULL,	"slimbus1_ck",			&slimbus1_ck,	CK_443X),
-	CLK(NULL,	"slimbus2_ck",			&slimbus2_ck,	CK_443X),
-	CLK(NULL,	"sr_core_ck",			&sr_core_ck,	CK_443X),
-	CLK(NULL,	"sr_iva_ck",			&sr_iva_ck,	CK_443X),
-	CLK(NULL,	"sr_mpu_ck",			&sr_mpu_ck,	CK_443X),
-	CLK(NULL,	"tesla_ck",			&tesla_ck,	CK_443X),
-	CLK(NULL,	"uart1_ck",			&uart1_ck,	CK_443X),
-	CLK(NULL,	"uart2_ck",			&uart2_ck,	CK_443X),
-	CLK(NULL,	"uart3_ck",			&uart3_ck,	CK_443X),
-	CLK(NULL,	"uart4_ck",			&uart4_ck,	CK_443X),
-	CLK(NULL,	"unipro1_ck",			&unipro1_ck,	CK_443X),
-	CLK(NULL,	"usb_host_ck",			&usb_host_ck,	CK_443X),
-	CLK(NULL,	"usb_host_fs_ck",		&usb_host_fs_ck,	CK_443X),
-	CLK("musb_hdrc",	"ick",				&usb_otg_ck,	CK_443X),
-	CLK(NULL,	"usb_tll_ck",			&usb_tll_ck,	CK_443X),
-	CLK(NULL,	"usbphyocp2scp_ck",		&usbphyocp2scp_ck,	CK_443X),
-	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
-	CLK("omap_wdt",	"fck",				&wdt2_ck,	CK_443X),
-	CLK(NULL,	"wdt3_ck",			&wdt3_ck,	CK_443X),
+	CLK("omap-mcbsp.4",	"fck",				&mcbsp4_fck,	CK_443X),
+	CLK("omap2_mcspi.1",	"fck",				&mcspi1_fck,	CK_443X),
+	CLK("omap2_mcspi.2",	"fck",				&mcspi2_fck,	CK_443X),
+	CLK("omap2_mcspi.3",	"fck",				&mcspi3_fck,	CK_443X),
+	CLK("omap2_mcspi.4",	"fck",				&mcspi4_fck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"fck",				&mmc1_fck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"fck",				&mmc2_fck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"fck",				&mmc3_fck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"fck",				&mmc4_fck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"fck",				&mmc5_fck,	CK_443X),
+	CLK(NULL,	"ocp_wp1_ick",			&ocp_wp1_ick,	CK_443X),
+	CLK(NULL,	"pdm_fck",			&pdm_fck,	CK_443X),
+	CLK(NULL,	"pkaeip29_fck",			&pkaeip29_fck,	CK_443X),
+	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
+	CLK(NULL,	"sha2md51_fck",			&sha2md51_fck,	CK_443X),
+	CLK(NULL,	"sl2_ick",			&sl2_ick,	CK_443X),
+	CLK(NULL,	"slimbus1_fck",			&slimbus1_fck,	CK_443X),
+	CLK(NULL,	"slimbus2_fck",			&slimbus2_fck,	CK_443X),
+	CLK(NULL,	"sr_core_fck",			&sr_core_fck,	CK_443X),
+	CLK(NULL,	"sr_iva_fck",			&sr_iva_fck,	CK_443X),
+	CLK(NULL,	"sr_mpu_fck",			&sr_mpu_fck,	CK_443X),
+	CLK(NULL,	"tesla_ick",			&tesla_ick,	CK_443X),
+	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
+	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
+	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
+	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
+	CLK(NULL,	"unipro1_fck",			&unipro1_fck,	CK_443X),
+	CLK(NULL,	"usb_host_fck",			&usb_host_fck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK("musb_hdrc",	"ick",				&usb_otg_ick,	CK_443X),
+	CLK(NULL,	"usb_tll_ick",			&usb_tll_ick,	CK_443X),
+	CLK(NULL,	"usbphyocp2scp_ick",		&usbphyocp2scp_ick,	CK_443X),
+	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
+	CLK("omap_wdt",	"fck",				&wdt2_fck,	CK_443X),
+	CLK(NULL,	"wdt3_fck",			&wdt3_fck,	CK_443X),
 	CLK(NULL,	"otg_60m_gfclk_ck",		&otg_60m_gfclk_ck,	CK_443X),
 	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
 	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk_ck",		&utmi_p1_gfclk_ck,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk_ck",		&utmi_p2_gfclk_ck,	CK_443X),
-};
-
-int __init omap2_clk_init(void)
+	CLK(NULL,	"gpio1_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio2_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio3_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio4_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio5_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio6_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt3_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt4_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt5_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt6_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt7_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt8_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
+	CLK("i2c_omap.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.1",	"ick",			&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.2",	"ick",			&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.3",	"ick",			&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.4",	"ick",			&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"ick",		&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
+	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
+};
+
+int __init omap4xxx_clk_init(void)
 {
-	/* struct prcm_config *prcm; */
 	struct omap_clk *c;
-	/* u32 clkrate; */
 	u32 cpu_clkflg;
 
 	if (cpu_is_omap44xx()) {
@@ -2749,9 +2710,7 @@ int __init omap2_clk_init(void)
 		if (c->cpu & cpu_clkflg) {
 			clkdev_add(&c->lk);
 			clk_register(c->lk.clk);
-			/* TODO
 			omap2_init_clk_clkdm(c->lk.clk);
-			*/
 		}
 
 	recalculate_root_clocks();
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
index f69096b..1cf8131 100644
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ b/arch/arm/mach-omap2/clock_common_data.c
@@ -20,20 +20,20 @@
 
 /* clksel_rate data common to 24xx/343x */
 const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
 	 { .div = 0 }
 };
 
 const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
 	 { .div = 0 }
 };
 
 const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index dd285f0..5d80cb8 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1,10 +1,11 @@
 /*
- * OMAP2/3 clockdomain framework functions
+ * OMAP2/3/4 clockdomain framework functions
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Written by Paul Walmsley and Jouni Högander
+ * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -26,43 +27,124 @@
 
 #include <linux/bitops.h>
 
-#include <plat/clock.h>
-
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 
+#include <plat/clock.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/prcm.h>
 
 /* clkdm_list contains all registered struct clockdomains */
 static LIST_HEAD(clkdm_list);
 
-/* clkdm_mutex protects clkdm_list add and del ops */
-static DEFINE_MUTEX(clkdm_mutex);
-
-/* array of powerdomain deps to be added/removed when clkdm in hwsup mode */
-static struct clkdm_pwrdm_autodep *autodeps;
+/* array of clockdomain deps to be added/removed when clkdm in hwsup mode */
+static struct clkdm_autodep *autodeps;
 
 
 /* Private functions */
 
+static struct clockdomain *_clkdm_lookup(const char *name)
+{
+	struct clockdomain *clkdm, *temp_clkdm;
+
+	if (!name)
+		return NULL;
+
+	clkdm = NULL;
+
+	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
+		if (!strcmp(name, temp_clkdm->name)) {
+			clkdm = temp_clkdm;
+			break;
+		}
+	}
+
+	return clkdm;
+}
+
+/**
+ * _clkdm_register - register a clockdomain
+ * @clkdm: struct clockdomain * to register
+ *
+ * Adds a clockdomain to the internal clockdomain list.
+ * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+static int _clkdm_register(struct clockdomain *clkdm)
+{
+	struct powerdomain *pwrdm;
+
+	if (!clkdm || !clkdm->name)
+		return -EINVAL;
+
+	if (!omap_chip_is(clkdm->omap_chip))
+		return -EINVAL;
+
+	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
+	if (!pwrdm) {
+		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
+			clkdm->name, clkdm->pwrdm.name);
+		return -EINVAL;
+	}
+	clkdm->pwrdm.ptr = pwrdm;
+
+	/* Verify that the clockdomain is not already registered */
+	if (_clkdm_lookup(clkdm->name))
+		return -EEXIST;
+
+	list_add(&clkdm->node, &clkdm_list);
+
+	pwrdm_add_clkdm(pwrdm, clkdm);
+
+	pr_debug("clockdomain: registered %s\n", clkdm->name);
+
+	return 0;
+}
+
+/* _clkdm_deps_lookup - look up the specified clockdomain in a clkdm list */
+static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
+					    struct clkdm_dep *deps)
+{
+	struct clkdm_dep *cd;
+
+	if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+		return ERR_PTR(-EINVAL);
+
+	for (cd = deps; cd->clkdm_name; cd++) {
+		if (!omap_chip_is(cd->omap_chip))
+			continue;
+
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
+		if (cd->clkdm == clkdm)
+			break;
+	}
+
+	if (!cd->clkdm_name)
+		return ERR_PTR(-ENOENT);
+
+	return cd;
+}
+
 /*
- * _autodep_lookup - resolve autodep pwrdm names to pwrdm pointers; store
- * @autodep: struct clkdm_pwrdm_autodep * to resolve
+ * _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store
+ * @autodep: struct clkdm_autodep * to resolve
  *
- * Resolve autodep powerdomain names to powerdomain pointers via
- * pwrdm_lookup() and store the pointers in the autodep structure.  An
- * "autodep" is a powerdomain sleep/wakeup dependency that is
+ * Resolve autodep clockdomain names to clockdomain pointers via
+ * clkdm_lookup() and store the pointers in the autodep structure.  An
+ * "autodep" is a clockdomain sleep/wakeup dependency that is
  * automatically added and removed whenever clocks in the associated
  * clockdomain are enabled or disabled (respectively) when the
  * clockdomain is in hardware-supervised mode.	Meant to be called
  * once at clockdomain layer initialization, since these should remain
  * fixed for a particular architecture.  No return value.
  */
-static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
+static void _autodep_lookup(struct clkdm_autodep *autodep)
 {
-	struct powerdomain *pwrdm;
+	struct clockdomain *clkdm;
 
 	if (!autodep)
 		return;
@@ -70,13 +152,13 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
 	if (!omap_chip_is(autodep->omap_chip))
 		return;
 
-	pwrdm = pwrdm_lookup(autodep->pwrdm.name);
-	if (!pwrdm) {
-		pr_err("clockdomain: autodeps: powerdomain %s does not exist\n",
-			 autodep->pwrdm.name);
-		pwrdm = ERR_PTR(-ENOENT);
+	clkdm = clkdm_lookup(autodep->clkdm.name);
+	if (!clkdm) {
+		pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
+			 autodep->clkdm.name);
+		clkdm = ERR_PTR(-ENOENT);
 	}
-	autodep->pwrdm.ptr = pwrdm;
+	autodep->clkdm.ptr = clkdm;
 }
 
 /*
@@ -89,21 +171,24 @@ static void _autodep_lookup(struct clkdm_pwrdm_autodep *autodep)
  */
 static void _clkdm_add_autodeps(struct clockdomain *clkdm)
 {
-	struct clkdm_pwrdm_autodep *autodep;
+	struct clkdm_autodep *autodep;
 
-	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
-		if (IS_ERR(autodep->pwrdm.ptr))
+	if (!autodeps)
+		return;
+
+	for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
+		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
 		if (!omap_chip_is(autodep->omap_chip))
 			continue;
 
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
-			 clkdm->pwrdm.ptr->name);
+			 "clkdm %s\n", autodep->clkdm.ptr->name,
+			 clkdm->name);
 
-		pwrdm_add_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
-		pwrdm_add_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
+		clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
 	}
 }
 
@@ -117,21 +202,24 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm)
  */
 static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 {
-	struct clkdm_pwrdm_autodep *autodep;
+	struct clkdm_autodep *autodep;
+
+	if (!autodeps)
+		return;
 
-	for (autodep = autodeps; autodep->pwrdm.ptr; autodep++) {
-		if (IS_ERR(autodep->pwrdm.ptr))
+	for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
+		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
 		if (!omap_chip_is(autodep->omap_chip))
 			continue;
 
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "pwrdm %s\n", autodep->pwrdm.ptr->name,
-			 clkdm->pwrdm.ptr->name);
+			 "clkdm %s\n", autodep->clkdm.ptr->name,
+			 clkdm->name);
 
-		pwrdm_del_sleepdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
-		pwrdm_del_wkdep(clkdm->pwrdm.ptr, autodep->pwrdm.ptr);
+		clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
+		clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
 	}
 }
 
@@ -145,152 +233,167 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
  */
 static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
 {
-	u32 v;
+	u32 bits, v;
 
 	if (cpu_is_omap24xx()) {
 		if (enable)
-			v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+			bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
 		else
-			v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-	} else if (cpu_is_omap34xx()) {
+			bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
-			v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+			bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
 		else
-			v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+			bits = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
 	} else {
 		BUG();
 	}
 
-	cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
-			    v << __ffs(clkdm->clktrctrl_mask),
-			    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
-}
-
-static struct clockdomain *_clkdm_lookup(const char *name)
-{
-	struct clockdomain *clkdm, *temp_clkdm;
-
-	if (!name)
-		return NULL;
-
-	clkdm = NULL;
+	bits = bits << __ffs(clkdm->clktrctrl_mask);
 
-	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
-		if (!strcmp(name, temp_clkdm->name)) {
-			clkdm = temp_clkdm;
-			break;
-		}
-	}
+	v = __raw_readl(clkdm->clkstctrl_reg);
+	v &= ~(clkdm->clktrctrl_mask);
+	v |= bits;
+	__raw_writel(v, clkdm->clkstctrl_reg);
 
-	return clkdm;
 }
 
-
-/* Public functions */
-
 /**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
+ * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
+ * @clkdm: clockdomain to initialize wkdep usecounts
  *
- * Set up internal state.  If a pointer to an array of clockdomains
- * was supplied, loop through the list of clockdomains, register all
- * that are available on the current platform.	Similarly, if a
- * pointer to an array of clockdomain-powerdomain autodependencies was
- * provided, register those.  No return value.
+ * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
+ * If a wakeup dependency is present in the hardware, the usecount will be
+ * set to 1; otherwise, it will be set to 0.  Software should clear all
+ * software wakeup dependencies prior to calling this function if it wishes
+ * to ensure that all usecounts start at 0.  No return value.
  */
-void clkdm_init(struct clockdomain **clkdms,
-		struct clkdm_pwrdm_autodep *init_autodeps)
+static void _init_wkdep_usecount(struct clockdomain *clkdm)
 {
-	struct clockdomain **c = NULL;
-	struct clkdm_pwrdm_autodep *autodep = NULL;
+	u32 v;
+	struct clkdm_dep *cd;
 
-	if (clkdms)
-		for (c = clkdms; *c; c++)
-			clkdm_register(*c);
+	if (!clkdm->wkdep_srcs)
+		return;
 
-	autodeps = init_autodeps;
-	if (autodeps)
-		for (autodep = autodeps; autodep->pwrdm.ptr; autodep++)
-			_autodep_lookup(autodep);
+	for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
+		if (!omap_chip_is(cd->omap_chip))
+			continue;
+
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
+		if (!cd->clkdm) {
+			WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
+			     "found\n", clkdm->name, cd->clkdm_name);
+			continue;
+		}
+
+		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
+					    PM_WKDEP,
+					    (1 << cd->clkdm->dep_bit));
+
+		if (v)
+			pr_debug("clockdomain: %s: wakeup dependency already "
+				 "set to wake up when %s wakes\n",
+				 clkdm->name, cd->clkdm->name);
+
+		atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
+	}
 }
 
 /**
- * clkdm_register - register a clockdomain
- * @clkdm: struct clockdomain * to register
+ * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
+ * @clkdm: clockdomain to initialize sleepdep usecounts
  *
- * Adds a clockdomain to the internal clockdomain list.
- * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
- * already registered by the provided name, or 0 upon success.
+ * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
+ * If a sleep dependency is present in the hardware, the usecount will be
+ * set to 1; otherwise, it will be set to 0.  Software should clear all
+ * software sleep dependencies prior to calling this function if it wishes
+ * to ensure that all usecounts start at 0.  No return value.
  */
-int clkdm_register(struct clockdomain *clkdm)
+static void _init_sleepdep_usecount(struct clockdomain *clkdm)
 {
-	int ret = -EINVAL;
-	struct powerdomain *pwrdm;
+	u32 v;
+	struct clkdm_dep *cd;
 
-	if (!clkdm || !clkdm->name)
-		return -EINVAL;
+	if (!cpu_is_omap34xx())
+		return;
 
-	if (!omap_chip_is(clkdm->omap_chip))
-		return -EINVAL;
+	if (!clkdm->sleepdep_srcs)
+		return;
 
-	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
-	if (!pwrdm) {
-		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
-			clkdm->name, clkdm->pwrdm.name);
-		return -EINVAL;
-	}
-	clkdm->pwrdm.ptr = pwrdm;
+	for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
+		if (!omap_chip_is(cd->omap_chip))
+			continue;
 
-	mutex_lock(&clkdm_mutex);
-	/* Verify that the clockdomain is not already registered */
-	if (_clkdm_lookup(clkdm->name)) {
-		ret = -EEXIST;
-		goto cr_unlock;
-	}
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
 
-	list_add(&clkdm->node, &clkdm_list);
+		if (!cd->clkdm) {
+			WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
+			     "not found\n", clkdm->name, cd->clkdm_name);
+			continue;
+		}
 
-	pwrdm_add_clkdm(pwrdm, clkdm);
+		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
+					    OMAP3430_CM_SLEEPDEP,
+					    (1 << cd->clkdm->dep_bit));
 
-	pr_debug("clockdomain: registered %s\n", clkdm->name);
-	ret = 0;
+		if (v)
+			pr_debug("clockdomain: %s: sleep dependency already "
+				 "set to prevent from idling until %s "
+				 "idles\n", clkdm->name, cd->clkdm->name);
 
-cr_unlock:
-	mutex_unlock(&clkdm_mutex);
+		atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
+	}
+};
 
-	return ret;
-}
+/* Public functions */
 
 /**
- * clkdm_unregister - unregister a clockdomain
- * @clkdm: struct clockdomain * to unregister
+ * clkdm_init - set up the clockdomain layer
+ * @clkdms: optional pointer to an array of clockdomains to register
+ * @init_autodeps: optional pointer to an array of autodeps to register
  *
- * Removes a clockdomain from the internal clockdomain list.  Returns
- * -EINVAL if clkdm argument is NULL.
+ * Set up internal state.  If a pointer to an array of clockdomains
+ * @clkdms was supplied, loop through the list of clockdomains,
+ * register all that are available on the current platform. Similarly,
+ * if a pointer to an array of clockdomain autodependencies
+ * @init_autodeps was provided, register those.  No return value.
  */
-int clkdm_unregister(struct clockdomain *clkdm)
+void clkdm_init(struct clockdomain **clkdms,
+		struct clkdm_autodep *init_autodeps)
 {
-	if (!clkdm)
-		return -EINVAL;
-
-	pwrdm_del_clkdm(clkdm->pwrdm.ptr, clkdm);
+	struct clockdomain **c = NULL;
+	struct clockdomain *clkdm;
+	struct clkdm_autodep *autodep = NULL;
 
-	mutex_lock(&clkdm_mutex);
-	list_del(&clkdm->node);
-	mutex_unlock(&clkdm_mutex);
+	if (clkdms)
+		for (c = clkdms; *c; c++)
+			_clkdm_register(*c);
 
-	pr_debug("clockdomain: unregistered %s\n", clkdm->name);
+	autodeps = init_autodeps;
+	if (autodeps)
+		for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
+			_autodep_lookup(autodep);
 
-	return 0;
+	/*
+	 * Ensure that the *dep_usecount registers reflect the current
+	 * state of the PRCM.
+	 */
+	list_for_each_entry(clkdm, &clkdm_list, node) {
+		_init_wkdep_usecount(clkdm);
+		_init_sleepdep_usecount(clkdm);
+	}
 }
 
 /**
  * clkdm_lookup - look up a clockdomain by name, return a pointer
  * @name: name of clockdomain
  *
- * Find a registered clockdomain by its name.  Returns a pointer to the
- * struct clockdomain if found, or NULL otherwise.
+ * Find a registered clockdomain by its name @name.  Returns a pointer
+ * to the struct clockdomain if found, or NULL otherwise.
  */
 struct clockdomain *clkdm_lookup(const char *name)
 {
@@ -301,14 +404,12 @@ struct clockdomain *clkdm_lookup(const char *name)
 
 	clkdm = NULL;
 
-	mutex_lock(&clkdm_mutex);
 	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
 		if (!strcmp(name, temp_clkdm->name)) {
 			clkdm = temp_clkdm;
 			break;
 		}
 	}
-	mutex_unlock(&clkdm_mutex);
 
 	return clkdm;
 }
@@ -317,8 +418,8 @@ struct clockdomain *clkdm_lookup(const char *name)
  * clkdm_for_each - call function on each registered clockdomain
  * @fn: callback function *
  *
- * Call the supplied function for each registered clockdomain.
- * The callback function can return anything but 0 to bail
+ * Call the supplied function @fn for each registered clockdomain.
+ * The callback function @fn can return anything but 0 to bail
  * out early from the iterator.  The callback function is called with
  * the clkdm_mutex held, so no clockdomain structure manipulation
  * functions should be called from the callback, although hardware
@@ -336,13 +437,11 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
 	if (!fn)
 		return -EINVAL;
 
-	mutex_lock(&clkdm_mutex);
 	list_for_each_entry(clkdm, &clkdm_list, node) {
 		ret = (*fn)(clkdm, user);
 		if (ret)
 			break;
 	}
-	mutex_unlock(&clkdm_mutex);
 
 	return ret;
 }
@@ -353,7 +452,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
  * @clkdm: struct clockdomain *
  *
  * Return a pointer to the struct powerdomain that the specified clockdomain
- * 'clkdm' exists in, or returns NULL if clkdm argument is NULL.
+ * @clkdm exists in, or returns NULL if @clkdm is NULL.
  */
 struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
 {
@@ -367,11 +466,309 @@ struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
 /* Hardware clockdomain control */
 
 /**
+ * clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
+ *
+ * When the clockdomain represented by @clkdm2 wakes up, wake up
+ * @clkdm1. Implemented in hardware on the OMAP, this feature is
+ * designed to reduce wakeup latency of the dependent clockdomain @clkdm1.
+ * Returns -EINVAL if presented with invalid clockdomain pointers,
+ * -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon
+ * success.
+ */
+int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
+		pr_debug("clockdomain: hardware will wake up %s when %s wakes "
+			 "up\n", clkdm1->name, clkdm2->name);
+
+		prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+				     clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	}
+
+	return 0;
+}
+
+/**
+ * clkdm_del_wkdep - remove a wakeup dependency from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
+ *
+ * Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2
+ * wakes up.  Returns -EINVAL if presented with invalid clockdomain
+ * pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or
+ * 0 upon success.
+ */
+int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
+		pr_debug("clockdomain: hardware will no longer wake up %s "
+			 "after %s wakes up\n", clkdm1->name, clkdm2->name);
+
+		prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+				       clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	}
+
+	return 0;
+}
+
+/**
+ * clkdm_read_wkdep - read wakeup dependency state from clkdm2 to clkdm1
+ * @clkdm1: wake this struct clockdomain * up (dependent)
+ * @clkdm2: when this struct clockdomain * wakes up (source)
+ *
+ * Return 1 if a hardware wakeup dependency exists wherein @clkdm1 will be
+ * awoken when @clkdm2 wakes up; 0 if dependency is not set; -EINVAL
+ * if either clockdomain pointer is invalid; or -ENOENT if the hardware
+ * is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * wakeup dependencies.  Wakeup dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear wake up of "
+			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	/* XXX It's faster to return the atomic wkdep_usecount */
+	return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP,
+				       (1 << clkdm2->dep_bit));
+}
+
+/**
+ * clkdm_clear_all_wkdeps - remove all wakeup dependencies from target clkdm
+ * @clkdm: struct clockdomain * to remove all wakeup dependencies from
+ *
+ * Remove all inter-clockdomain wakeup dependencies that could cause
+ * @clkdm to wake.  Intended to be used during boot to initialize the
+ * PRCM to a known state, after all clockdomains are put into swsup idle
+ * and woken up.  Returns -EINVAL if @clkdm pointer is invalid, or
+ * 0 upon success.
+ */
+int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	if (!clkdm)
+		return -EINVAL;
+
+	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!omap_chip_is(cd->omap_chip))
+			continue;
+
+		/* PRM accesses are slow, so minimize them */
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->wkdep_usecount, 0);
+	}
+
+	prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP);
+
+	return 0;
+}
+
+/**
+ * clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Prevent @clkdm1 from automatically going inactive (and then to
+ * retention or off) if @clkdm2 is active.  Returns -EINVAL if
+ * presented with invalid clockdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep
+ * dependencies, -ENOENT if the specified dependency cannot be set in
+ * hardware, or 0 upon success.
+ */
+int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", clkdm1->name,
+			 clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
+		pr_debug("clockdomain: will prevent %s from sleeping if %s "
+			 "is active\n", clkdm1->name, clkdm2->name);
+
+		cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+				    clkdm1->pwrdm.ptr->prcm_offs,
+				    OMAP3430_CM_SLEEPDEP);
+	}
+
+	return 0;
+}
+
+/**
+ * clkdm_del_sleepdep - remove a sleep dependency from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Allow @clkdm1 to automatically go inactive (and then to retention or
+ * off), independent of the activity state of @clkdm2.  Returns -EINVAL
+ * if presented with invalid clockdomain pointers or called on a machine
+ * that does not support software-configurable hardware sleep dependencies,
+ * -ENOENT if the specified dependency cannot be cleared in hardware, or
+ * 0 upon success.
+ */
+int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", clkdm1->name,
+			 clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
+		pr_debug("clockdomain: will no longer prevent %s from "
+			 "sleeping if %s is active\n", clkdm1->name,
+			 clkdm2->name);
+
+		cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+				      clkdm1->pwrdm.ptr->prcm_offs,
+				      OMAP3430_CM_SLEEPDEP);
+	}
+
+	return 0;
+}
+
+/**
+ * clkdm_read_sleepdep - read sleep dependency state from clkdm2 to clkdm1
+ * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
+ * @clkdm2: when this struct clockdomain * is active (source)
+ *
+ * Return 1 if a hardware sleep dependency exists wherein @clkdm1 will
+ * not be allowed to automatically go inactive if @clkdm2 is active;
+ * 0 if @clkdm1's automatic power state inactivity transition is independent
+ * of @clkdm2's; -EINVAL if either clockdomain pointer is invalid or called
+ * on a machine that does not support software-configurable hardware sleep
+ * dependencies; or -ENOENT if the hardware is incapable.
+ *
+ * REVISIT: Currently this function only represents software-controllable
+ * sleep dependencies.	Sleep dependencies fixed in hardware are not
+ * yet handled here.
+ */
+int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
+{
+	struct clkdm_dep *cd;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	if (!clkdm1 || !clkdm2)
+		return -EINVAL;
+
+	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
+	if (IS_ERR(cd)) {
+		pr_debug("clockdomain: hardware cannot set/clear sleep "
+			 "dependency affecting %s from %s\n", clkdm1->name,
+			 clkdm2->name);
+		return PTR_ERR(cd);
+	}
+
+	/* XXX It's faster to return the atomic sleepdep_usecount */
+	return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+				       OMAP3430_CM_SLEEPDEP,
+				       (1 << clkdm2->dep_bit));
+}
+
+/**
+ * clkdm_clear_all_sleepdeps - remove all sleep dependencies from target clkdm
+ * @clkdm: struct clockdomain * to remove all sleep dependencies from
+ *
+ * Remove all inter-clockdomain sleep dependencies that could prevent
+ * @clkdm from idling.  Intended to be used during boot to initialize the
+ * PRCM to a known state, after all clockdomains are put into swsup idle
+ * and woken up.  Returns -EINVAL if @clkdm pointer is invalid, or
+ * 0 upon success.
+ */
+int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
+{
+	struct clkdm_dep *cd;
+	u32 mask = 0;
+
+	if (!cpu_is_omap34xx())
+		return -EINVAL;
+
+	if (!clkdm)
+		return -EINVAL;
+
+	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+		if (!omap_chip_is(cd->omap_chip))
+			continue;
+
+		/* PRM accesses are slow, so minimize them */
+		mask |= 1 << cd->clkdm->dep_bit;
+		atomic_set(&cd->sleepdep_usecount, 0);
+	}
+
+	prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+			       OMAP3430_CM_SLEEPDEP);
+
+	return 0;
+}
+
+/**
  * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
- * @clk: struct clk * of a clockdomain
+ * @clkdm: struct clkdm * of a clockdomain
  *
- * Return the clockdomain's current state transition mode from the
- * corresponding domain CM_CLKSTCTRL register.	Returns -EINVAL if clk
+ * Return the clockdomain @clkdm current state transition mode from the
+ * corresponding domain CM_CLKSTCTRL register.	Returns -EINVAL if @clkdm
  * is NULL or the current mode upon success.
  */
 static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
@@ -381,7 +778,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
 	if (!clkdm)
 		return -EINVAL;
 
-	v = cm_read_mod_reg(clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+	v = __raw_readl(clkdm->clkstctrl_reg);
 	v &= clkdm->clktrctrl_mask;
 	v >>= __ffs(clkdm->clktrctrl_mask);
 
@@ -393,7 +790,7 @@ static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
  * @clkdm: struct clockdomain *
  *
  * Instruct the CM to force a sleep transition on the specified
- * clockdomain 'clkdm'.  Returns -EINVAL if clk is NULL or if
+ * clockdomain @clkdm.  Returns -EINVAL if @clkdm is NULL or if
  * clockdomain does not support software-initiated sleep; 0 upon
  * success.
  */
@@ -412,16 +809,18 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 
 	if (cpu_is_omap24xx()) {
 
-		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
-				    clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
+		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+			    clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx()) {
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 
-		u32 v = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
+		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
 			 __ffs(clkdm->clktrctrl_mask));
 
-		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+		u32 v = __raw_readl(clkdm->clkstctrl_reg);
+		v &= ~(clkdm->clktrctrl_mask);
+		v |= bits;
+		__raw_writel(v, clkdm->clkstctrl_reg);
 
 	} else {
 		BUG();
@@ -435,7 +834,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
  * @clkdm: struct clockdomain *
  *
  * Instruct the CM to force a wakeup transition on the specified
- * clockdomain 'clkdm'.  Returns -EINVAL if clkdm is NULL or if the
+ * clockdomain @clkdm.  Returns -EINVAL if @clkdm is NULL or if the
  * clockdomain does not support software-controlled wakeup; 0 upon
  * success.
  */
@@ -454,16 +853,18 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 
 	if (cpu_is_omap24xx()) {
 
-		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
-				      clkdm->pwrdm.ptr->prcm_offs, PM_PWSTCTRL);
+		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+			      clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx()) {
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 
-		u32 v = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
+		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
 			 __ffs(clkdm->clktrctrl_mask));
 
-		cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask, v,
-				    clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+		u32 v = __raw_readl(clkdm->clkstctrl_reg);
+		v &= ~(clkdm->clktrctrl_mask);
+		v |= bits;
+		__raw_writel(v, clkdm->clkstctrl_reg);
 
 	} else {
 		BUG();
@@ -476,7 +877,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
  * omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
  * @clkdm: struct clockdomain *
  *
- * Allow the hardware to automatically switch the clockdomain into
+ * Allow the hardware to automatically switch the clockdomain @clkdm into
  * active or idle states, as needed by downstream clocks.  If the
  * clockdomain has any downstream clocks enabled in the clock
  * framework, wkdep/sleepdep autodependencies are added; this is so
@@ -496,8 +897,17 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
 		 clkdm->name);
 
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
+	/*
+	 * XXX This should be removed once TI adds wakeup/sleep
+	 * dependency code and data for OMAP4.
+	 */
+	if (cpu_is_omap44xx()) {
+		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+			  "support is not yet implemented\n");
+	} else {
+		if (atomic_read(&clkdm->usecount) > 0)
+			_clkdm_add_autodeps(clkdm);
+	}
 
 	_omap2_clkdm_set_hwsup(clkdm, 1);
 
@@ -509,8 +919,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
  * @clkdm: struct clockdomain *
  *
  * Prevent the hardware from automatically switching the clockdomain
- * into inactive or idle states.  If the clockdomain has downstream
- * clocks enabled in the clock framework, wkdep/sleepdep
+ * @clkdm into inactive or idle states.  If the clockdomain has
+ * downstream clocks enabled in the clock framework, wkdep/sleepdep
  * autodependencies are removed.  No return value.
  */
 void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
@@ -529,8 +939,17 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 
 	_omap2_clkdm_set_hwsup(clkdm, 0);
 
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_del_autodeps(clkdm);
+	/*
+	 * XXX This should be removed once TI adds wakeup/sleep
+	 * dependency code and data for OMAP4.
+	 */
+	if (cpu_is_omap44xx()) {
+		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+			  "support is not yet implemented\n");
+	} else {
+		if (atomic_read(&clkdm->usecount) > 0)
+			_clkdm_del_autodeps(clkdm);
+	}
 }
 
 
@@ -541,14 +960,14 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
  * @clkdm: struct clockdomain *
  * @clk: struct clk * of the enabled downstream clock
  *
- * Increment the usecount of this clockdomain 'clkdm' and ensure that
- * it is awake.  Intended to be called by clk_enable() code.  If the
- * clockdomain is in software-supervised idle mode, force the
- * clockdomain to wake.  If the clockdomain is in hardware-supervised
- * idle mode, add clkdm-pwrdm autodependencies, to ensure that devices
- * in the clockdomain can be read from/written to by on-chip processors.
- * Returns -EINVAL if passed null pointers; returns 0 upon success or
- * if the clockdomain is in hwsup idle mode.
+ * Increment the usecount of the clockdomain @clkdm and ensure that it
+ * is awake before @clk is enabled.  Intended to be called by
+ * clk_enable() code.  If the clockdomain is in software-supervised
+ * idle mode, force the clockdomain to wake.  If the clockdomain is in
+ * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
+ * ensure that devices in the clockdomain can be read from/written to
+ * by on-chip processors.  Returns -EINVAL if passed null pointers;
+ * returns 0 upon success or if the clockdomain is in hwsup idle mode.
  */
 int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 {
@@ -559,7 +978,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
+	if (!clkdm || !clk)
 		return -EINVAL;
 
 	if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -570,6 +989,9 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
 		 clk->name);
 
+	if (!clkdm->clkstctrl_reg)
+		return 0;
+
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
@@ -593,13 +1015,14 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
  * @clkdm: struct clockdomain *
  * @clk: struct clk * of the disabled downstream clock
  *
- * Decrement the usecount of this clockdomain 'clkdm'. Intended to be
- * called by clk_disable() code.  If the usecount goes to 0, put the
- * clockdomain to sleep (software-supervised mode) or remove the
- * clkdm-pwrdm autodependencies (hardware-supervised mode).  Returns
- * -EINVAL if passed null pointers; -ERANGE if the clkdm usecount
- * underflows and debugging is enabled; or returns 0 upon success or
- * if the clockdomain is in hwsup idle mode.
+ * Decrement the usecount of this clockdomain @clkdm when @clk is
+ * disabled.  Intended to be called by clk_disable() code.  If the
+ * clockdomain usecount goes to 0, put the clockdomain to sleep
+ * (software-supervised mode) or remove the clkdm autodependencies
+ * (hardware-supervised mode).  Returns -EINVAL if passed null
+ * pointers; -ERANGE if the @clkdm usecount underflows and debugging
+ * is enabled; or returns 0 upon success or if the clockdomain is in
+ * hwsup idle mode.
  */
 int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 {
@@ -610,7 +1033,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
+	if (!clkdm || !clk)
 		return -EINVAL;
 
 #ifdef DEBUG
@@ -628,6 +1051,9 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
 		 clk->name);
 
+	if (!clkdm->clkstctrl_reg)
+		return 0;
+
 	v = omap2_clkdm_clktrctrl_read(clkdm);
 
 	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index c4ee076..8fc19ff 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -1,16 +1,420 @@
 /*
  * OMAP2/3 clockdomains
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Written by Paul Walmsley and Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP2/3 chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies.  Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
 #include <plat/clockdomain.h>
+#include "cm.h"
+#include "prm.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP2/3-common wakeup dependencies */
+
+/*
+ * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* 24XX-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+/* Wakeup dependency source arrays */
+
+/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
+static struct clkdm_dep dsp_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep mpu_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "dsp_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mdm_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep core_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "dsp_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "gfx_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mdm_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+#endif
+
+
+/* 2430-specific possible wakeup dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{ NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP2430 */
+
+
+/* OMAP3-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "dss_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "per_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "dss_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "per_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP3 */
+
 
 /*
  * OMAP2/3-common clockdomains
@@ -21,10 +425,13 @@
  * sys_clkout/sys_clkout2.
  */
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
 /* This is an implicit clockdomain - it is never defined as such in TRM */
 static struct clockdomain wkup_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
+	.dep_bit	= OMAP_EN_WKUP_SHIFT,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
@@ -40,6 +447,8 @@ static struct clockdomain cm_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
+#endif
+
 /*
  * 2420-only clockdomains
  */
@@ -50,6 +459,8 @@ static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
@@ -58,11 +469,64 @@ static struct clockdomain iva1_2420_clkdm = {
 	.name		= "iva1_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
-#endif  /* CONFIG_ARCH_OMAP2420 */
+static struct clockdomain dsp_2420_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= core_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= core_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain dss_2420_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+#endif   /* CONFIG_ARCH_OMAP2420 */
 
 
 /*
@@ -75,80 +539,105 @@ static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(MPU_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/* Another case of bit name collisions between several registers: EN_MDM */
 static struct clockdomain mdm_clkdm = {
 	.name		= "mdm_clkdm",
 	.pwrdm		= { .name = "mdm_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP2430_MDM_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+	.wkdep_srcs	= mdm_2430_wkdeps,
 	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif    /* CONFIG_ARCH_OMAP2430 */
-
-
-/*
- * 24XX-only clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-
-static struct clockdomain dsp_clkdm = {
+static struct clockdomain dsp_2430_clkdm = {
 	.name		= "dsp_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain gfx_24xx_clkdm = {
+static struct clockdomain gfx_2430_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain core_l3_24xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain core_l4_24xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain dss_24xx_clkdm = {
+static struct clockdomain dss_2430_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif   /* CONFIG_ARCH_OMAP24XX */
+#endif    /* CONFIG_ARCH_OMAP2430 */
 
 
 /*
- * 34xx clockdomains
+ * OMAP3 clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
 
-static struct clockdomain mpu_34xx_clkdm = {
+static struct clockdomain mpu_3xxx_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_MPU_SHIFT,
+	.wkdep_srcs	= mpu_3xxx_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -157,6 +646,9 @@ static struct clockdomain neon_clkdm = {
 	.name		= "neon_clkdm",
 	.pwrdm		= { .name = "neon_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_NEON_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= neon_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -165,6 +657,10 @@ static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
 	.pwrdm		= { .name = "iva2_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_IVA2_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+	.wkdep_srcs	= iva2_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -173,6 +669,9 @@ static struct clockdomain gfx_3430es1_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
 };
@@ -181,6 +680,10 @@ static struct clockdomain sgx_clkdm = {
 	.name		= "sgx_clkdm",
 	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_SGX_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
@@ -196,30 +699,51 @@ static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain core_l3_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain core_l4_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain dss_34xx_clkdm = {
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "dss_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_DSS_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+	.wkdep_srcs	= dss_wkdeps,
+	.sleepdep_srcs	= dss_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -228,6 +752,10 @@ static struct clockdomain cam_clkdm = {
 	.name		= "cam_clkdm",
 	.pwrdm		= { .name = "cam_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_CAM_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= cam_wkdeps,
+	.sleepdep_srcs	= cam_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -236,6 +764,10 @@ static struct clockdomain usbhost_clkdm = {
 	.name		= "usbhost_clkdm",
 	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_USBHOST_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= usbhost_wkdeps,
+	.sleepdep_srcs	= usbhost_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
@@ -244,6 +776,11 @@ static struct clockdomain per_clkdm = {
 	.name		= "per_clkdm",
 	.pwrdm		= { .name = "per_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_PER_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_PER_SHIFT,
+	.wkdep_srcs	= per_wkdeps,
+	.sleepdep_srcs	= per_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -256,6 +793,8 @@ static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
 	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_EMU_MOD,
+						 OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -290,64 +829,70 @@ static struct clockdomain dpll5_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
-#endif   /* CONFIG_ARCH_OMAP34XX */
+#endif   /* CONFIG_ARCH_OMAP3 */
+
+#include "clockdomains44xx.h"
 
 /*
- * Clockdomain-powerdomain hwsup dependencies (34XX only)
+ * Clockdomain hwsup dependencies (OMAP3 only)
  */
 
-static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
+static struct clkdm_autodep clkdm_autodeps[] = {
 	{
-		.pwrdm	   = { .name = "mpu_pwrdm" },
+		.clkdm	   = { .name = "mpu_clkdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm	   = { .name = "iva2_pwrdm" },
+		.clkdm	   = { .name = "iva2_clkdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm	   = { .name = NULL },
+		.clkdm	   = { .name = NULL },
 	}
 };
 
 /*
- *
+ * List of clockdomain pointers per platform
  */
 
 static struct clockdomain *clockdomains_omap[] = {
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	&wkup_clkdm,
 	&cm_clkdm,
 	&prm_clkdm,
+#endif
 
 #ifdef CONFIG_ARCH_OMAP2420
 	&mpu_2420_clkdm,
 	&iva1_2420_clkdm,
+	&dsp_2420_clkdm,
+	&gfx_2420_clkdm,
+	&core_l3_2420_clkdm,
+	&core_l4_2420_clkdm,
+	&dss_2420_clkdm,
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
 	&mpu_2430_clkdm,
 	&mdm_clkdm,
+	&dsp_2430_clkdm,
+	&gfx_2430_clkdm,
+	&core_l3_2430_clkdm,
+	&core_l4_2430_clkdm,
+	&dss_2430_clkdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
-	&dsp_clkdm,
-	&gfx_24xx_clkdm,
-	&core_l3_24xx_clkdm,
-	&core_l4_24xx_clkdm,
-	&dss_24xx_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP34XX
-	&mpu_34xx_clkdm,
+#ifdef CONFIG_ARCH_OMAP3
+	&mpu_3xxx_clkdm,
 	&neon_clkdm,
 	&iva2_clkdm,
 	&gfx_3430es1_clkdm,
 	&sgx_clkdm,
 	&d2d_clkdm,
-	&core_l3_34xx_clkdm,
-	&core_l4_34xx_clkdm,
-	&dss_34xx_clkdm,
+	&core_l3_3xxx_clkdm,
+	&core_l4_3xxx_clkdm,
+	&dss_3xxx_clkdm,
 	&cam_clkdm,
 	&usbhost_clkdm,
 	&per_clkdm,
@@ -359,6 +904,33 @@ static struct clockdomain *clockdomains_omap[] = {
 	&dpll5_clkdm,
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+	&l4_cefuse_44xx_clkdm,
+	&l4_cfg_44xx_clkdm,
+	&tesla_44xx_clkdm,
+	&l3_gfx_44xx_clkdm,
+	&ivahd_44xx_clkdm,
+	&l4_secure_44xx_clkdm,
+	&l4_per_44xx_clkdm,
+	&abe_44xx_clkdm,
+	&l3_instr_44xx_clkdm,
+	&l3_init_44xx_clkdm,
+	&mpuss_44xx_clkdm,
+	&mpu0_44xx_clkdm,
+	&mpu1_44xx_clkdm,
+	&l3_emif_44xx_clkdm,
+	&l4_ao_44xx_clkdm,
+	&ducati_44xx_clkdm,
+	&l3_2_44xx_clkdm,
+	&l3_1_44xx_clkdm,
+	&l3_d2d_44xx_clkdm,
+	&iss_44xx_clkdm,
+	&l3_dss_44xx_clkdm,
+	&l4_wkup_44xx_clkdm,
+	&emu_sys_44xx_clkdm,
+	&l3_dma_44xx_clkdm,
+#endif
+
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/clockdomains44xx.h b/arch/arm/mach-omap2/clockdomains44xx.h
new file mode 100644
index 0000000..7e5ba0f
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains44xx.h
@@ -0,0 +1,250 @@
+/*
+ * OMAP4 Clock domains framework
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * To-Do List
+ * -> Populate the Sleep/Wakeup dependencies for the domains
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+
+#include <plat/clockdomain.h>
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+static struct clockdomain l4_cefuse_44xx_clkdm = {
+	.name		  = "l4_cefuse_clkdm",
+	.pwrdm		  = { .name = "cefuse_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CEFUSE_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_cfg_44xx_clkdm = {
+	.name		  = "l4_cfg_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4CFG_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain tesla_44xx_clkdm = {
+	.name		  = "tesla_clkdm",
+	.pwrdm		  = { .name = "tesla_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_TESLA_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_gfx_44xx_clkdm = {
+	.name		  = "l3_gfx_clkdm",
+	.pwrdm		  = { .name = "gfx_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_GFX_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ivahd_44xx_clkdm = {
+	.name		  = "ivahd_clkdm",
+	.pwrdm		  = { .name = "ivahd_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_IVAHD_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_secure_44xx_clkdm = {
+	.name		  = "l4_secure_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4SEC_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_per_44xx_clkdm = {
+	.name		  = "l4_per_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4PER_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain abe_44xx_clkdm = {
+	.name		  = "abe_clkdm",
+	.pwrdm		  = { .name = "abe_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM1_ABE_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_instr_44xx_clkdm = {
+	.name		  = "l3_instr_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3INSTR_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_init_44xx_clkdm = {
+	.name		  = "l3_init_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3INIT_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpuss_44xx_clkdm = {
+	.name		  = "mpuss_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_MPU_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu0_44xx_clkdm = {
+	.name		  = "mpu0_clkdm",
+	.pwrdm		  = { .name = "cpu0_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CPU0_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu1_44xx_clkdm = {
+	.name		  = "mpu1_clkdm",
+	.pwrdm		  = { .name = "cpu1_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CPU1_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_emif_44xx_clkdm = {
+	.name		  = "l3_emif_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_MEMIF_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_ao_44xx_clkdm = {
+	.name		  = "l4_ao_clkdm",
+	.pwrdm		  = { .name = "always_on_core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_ALWON_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ducati_44xx_clkdm = {
+	.name		  = "ducati_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_DUCATI_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_2_44xx_clkdm = {
+	.name		  = "l3_2_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3_2_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_1_44xx_clkdm = {
+	.name		  = "l3_1_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3_1_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_d2d_44xx_clkdm = {
+	.name		  = "l3_d2d_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_D2D_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain iss_44xx_clkdm = {
+	.name		  = "iss_clkdm",
+	.pwrdm		  = { .name = "cam_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CAM_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dss_44xx_clkdm = {
+	.name		  = "l3_dss_clkdm",
+	.pwrdm		  = { .name = "dss_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_DSS_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_wkup_44xx_clkdm = {
+	.name		  = "l4_wkup_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_WKUP_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain emu_sys_44xx_clkdm = {
+	.name		  = "emu_sys_clkdm",
+	.pwrdm		  = { .name = "emu_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_EMU_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dma_44xx_clkdm = {
+	.name		  = "l3_dma_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_SDMA_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 297a2fe..da51cc3 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -20,43 +20,43 @@
 
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP24XX_EN_CAM_SHIFT				31
-#define OMAP24XX_EN_CAM					(1 << 31)
+#define OMAP24XX_EN_CAM_MASK				(1 << 31)
 #define OMAP24XX_EN_WDT4_SHIFT				29
-#define OMAP24XX_EN_WDT4				(1 << 29)
+#define OMAP24XX_EN_WDT4_MASK				(1 << 29)
 #define OMAP2420_EN_WDT3_SHIFT				28
-#define OMAP2420_EN_WDT3				(1 << 28)
+#define OMAP2420_EN_WDT3_MASK				(1 << 28)
 #define OMAP24XX_EN_MSPRO_SHIFT				27
-#define OMAP24XX_EN_MSPRO				(1 << 27)
+#define OMAP24XX_EN_MSPRO_MASK				(1 << 27)
 #define OMAP24XX_EN_FAC_SHIFT				25
-#define OMAP24XX_EN_FAC					(1 << 25)
+#define OMAP24XX_EN_FAC_MASK				(1 << 25)
 #define OMAP2420_EN_EAC_SHIFT				24
-#define OMAP2420_EN_EAC					(1 << 24)
+#define OMAP2420_EN_EAC_MASK				(1 << 24)
 #define OMAP24XX_EN_HDQ_SHIFT				23
-#define OMAP24XX_EN_HDQ					(1 << 23)
+#define OMAP24XX_EN_HDQ_MASK				(1 << 23)
 #define OMAP2420_EN_I2C2_SHIFT				20
-#define OMAP2420_EN_I2C2				(1 << 20)
+#define OMAP2420_EN_I2C2_MASK				(1 << 20)
 #define OMAP2420_EN_I2C1_SHIFT				19
-#define OMAP2420_EN_I2C1				(1 << 19)
+#define OMAP2420_EN_I2C1_MASK				(1 << 19)
 
 /* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
 #define OMAP2430_EN_MCBSP5_SHIFT			5
-#define OMAP2430_EN_MCBSP5				(1 << 5)
+#define OMAP2430_EN_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_EN_MCBSP4_SHIFT			4
-#define OMAP2430_EN_MCBSP4				(1 << 4)
+#define OMAP2430_EN_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_EN_MCBSP3_SHIFT			3
-#define OMAP2430_EN_MCBSP3				(1 << 3)
+#define OMAP2430_EN_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_EN_SSI_SHIFT				1
-#define OMAP24XX_EN_SSI					(1 << 1)
+#define OMAP24XX_EN_SSI_MASK				(1 << 1)
 
 /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
 #define OMAP24XX_EN_MPU_WDT_SHIFT			3
-#define OMAP24XX_EN_MPU_WDT				(1 << 3)
+#define OMAP24XX_EN_MPU_WDT_MASK			(1 << 3)
 
 /* Bits specific to each register */
 
 /* CM_IDLEST_MPU */
 /* 2430 only */
-#define OMAP2430_ST_MPU					(1 << 0)
+#define OMAP2430_ST_MPU_MASK				(1 << 0)
 
 /* CM_CLKSEL_MPU */
 #define OMAP24XX_CLKSEL_MPU_SHIFT			0
@@ -68,46 +68,46 @@
 
 /* CM_FCLKEN1_CORE specific bits*/
 #define OMAP24XX_EN_TV_SHIFT				2
-#define OMAP24XX_EN_TV					(1 << 2)
+#define OMAP24XX_EN_TV_MASK				(1 << 2)
 #define OMAP24XX_EN_DSS2_SHIFT				1
-#define OMAP24XX_EN_DSS2				(1 << 1)
+#define OMAP24XX_EN_DSS2_MASK				(1 << 1)
 #define OMAP24XX_EN_DSS1_SHIFT				0
-#define OMAP24XX_EN_DSS1				(1 << 0)
+#define OMAP24XX_EN_DSS1_MASK				(1 << 0)
 
 /* CM_FCLKEN2_CORE specific bits */
 #define OMAP2430_EN_I2CHS2_SHIFT			20
-#define OMAP2430_EN_I2CHS2				(1 << 20)
+#define OMAP2430_EN_I2CHS2_MASK				(1 << 20)
 #define OMAP2430_EN_I2CHS1_SHIFT			19
-#define OMAP2430_EN_I2CHS1				(1 << 19)
+#define OMAP2430_EN_I2CHS1_MASK				(1 << 19)
 #define OMAP2430_EN_MMCHSDB2_SHIFT			17
-#define OMAP2430_EN_MMCHSDB2				(1 << 17)
+#define OMAP2430_EN_MMCHSDB2_MASK			(1 << 17)
 #define OMAP2430_EN_MMCHSDB1_SHIFT			16
-#define OMAP2430_EN_MMCHSDB1				(1 << 16)
+#define OMAP2430_EN_MMCHSDB1_MASK			(1 << 16)
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP24XX_EN_MAILBOXES_SHIFT			30
-#define OMAP24XX_EN_MAILBOXES				(1 << 30)
+#define OMAP24XX_EN_MAILBOXES_MASK			(1 << 30)
 #define OMAP24XX_EN_DSS_SHIFT				0
-#define OMAP24XX_EN_DSS					(1 << 0)
+#define OMAP24XX_EN_DSS_MASK				(1 << 0)
 
 /* CM_ICLKEN2_CORE specific bits */
 
 /* CM_ICLKEN3_CORE */
 /* 2430 only */
 #define OMAP2430_EN_SDRC_SHIFT				2
-#define OMAP2430_EN_SDRC				(1 << 2)
+#define OMAP2430_EN_SDRC_MASK				(1 << 2)
 
 /* CM_ICLKEN4_CORE */
 #define OMAP24XX_EN_PKA_SHIFT				4
-#define OMAP24XX_EN_PKA					(1 << 4)
+#define OMAP24XX_EN_PKA_MASK				(1 << 4)
 #define OMAP24XX_EN_AES_SHIFT				3
-#define OMAP24XX_EN_AES					(1 << 3)
+#define OMAP24XX_EN_AES_MASK				(1 << 3)
 #define OMAP24XX_EN_RNG_SHIFT				2
-#define OMAP24XX_EN_RNG					(1 << 2)
+#define OMAP24XX_EN_RNG_MASK				(1 << 2)
 #define OMAP24XX_EN_SHA_SHIFT				1
-#define OMAP24XX_EN_SHA					(1 << 1)
+#define OMAP24XX_EN_SHA_MASK				(1 << 1)
 #define OMAP24XX_EN_DES_SHIFT				0
-#define OMAP24XX_EN_DES					(1 << 0)
+#define OMAP24XX_EN_DES_MASK				(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
 #define OMAP24XX_ST_MAILBOXES_SHIFT			30
@@ -138,9 +138,9 @@
 /* CM_IDLEST2_CORE */
 #define OMAP2430_ST_MCBSP5_SHIFT			5
 #define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
-#define OMAP2430_ST_MCBSP4_SHIFT				4
+#define OMAP2430_ST_MCBSP4_SHIFT			4
 #define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
-#define OMAP2430_ST_MCBSP3_SHIFT				3
+#define OMAP2430_ST_MCBSP3_SHIFT			3
 #define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_ST_SSI_SHIFT				1
 #define OMAP24XX_ST_SSI_MASK				(1 << 1)
@@ -162,62 +162,62 @@
 #define OMAP24XX_ST_DES_MASK				(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM				(1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES				(1 << 30)
-#define OMAP24XX_AUTO_WDT4				(1 << 29)
-#define OMAP2420_AUTO_WDT3				(1 << 28)
-#define OMAP24XX_AUTO_MSPRO				(1 << 27)
-#define OMAP2420_AUTO_MMC				(1 << 26)
-#define OMAP24XX_AUTO_FAC				(1 << 25)
-#define OMAP2420_AUTO_EAC				(1 << 24)
-#define OMAP24XX_AUTO_HDQ				(1 << 23)
-#define OMAP24XX_AUTO_UART2				(1 << 22)
-#define OMAP24XX_AUTO_UART1				(1 << 21)
-#define OMAP24XX_AUTO_I2C2				(1 << 20)
-#define OMAP24XX_AUTO_I2C1				(1 << 19)
-#define OMAP24XX_AUTO_MCSPI2				(1 << 18)
-#define OMAP24XX_AUTO_MCSPI1				(1 << 17)
-#define OMAP24XX_AUTO_MCBSP2				(1 << 16)
-#define OMAP24XX_AUTO_MCBSP1				(1 << 15)
-#define OMAP24XX_AUTO_GPT12				(1 << 14)
-#define OMAP24XX_AUTO_GPT11				(1 << 13)
-#define OMAP24XX_AUTO_GPT10				(1 << 12)
-#define OMAP24XX_AUTO_GPT9				(1 << 11)
-#define OMAP24XX_AUTO_GPT8				(1 << 10)
-#define OMAP24XX_AUTO_GPT7				(1 << 9)
-#define OMAP24XX_AUTO_GPT6				(1 << 8)
-#define OMAP24XX_AUTO_GPT5				(1 << 7)
-#define OMAP24XX_AUTO_GPT4				(1 << 6)
-#define OMAP24XX_AUTO_GPT3				(1 << 5)
-#define OMAP24XX_AUTO_GPT2				(1 << 4)
-#define OMAP2420_AUTO_VLYNQ				(1 << 3)
-#define OMAP24XX_AUTO_DSS				(1 << 0)
+#define OMAP24XX_AUTO_CAM_MASK				(1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES_MASK			(1 << 30)
+#define OMAP24XX_AUTO_WDT4_MASK				(1 << 29)
+#define OMAP2420_AUTO_WDT3_MASK				(1 << 28)
+#define OMAP24XX_AUTO_MSPRO_MASK			(1 << 27)
+#define OMAP2420_AUTO_MMC_MASK				(1 << 26)
+#define OMAP24XX_AUTO_FAC_MASK				(1 << 25)
+#define OMAP2420_AUTO_EAC_MASK				(1 << 24)
+#define OMAP24XX_AUTO_HDQ_MASK				(1 << 23)
+#define OMAP24XX_AUTO_UART2_MASK			(1 << 22)
+#define OMAP24XX_AUTO_UART1_MASK			(1 << 21)
+#define OMAP24XX_AUTO_I2C2_MASK				(1 << 20)
+#define OMAP24XX_AUTO_I2C1_MASK				(1 << 19)
+#define OMAP24XX_AUTO_MCSPI2_MASK			(1 << 18)
+#define OMAP24XX_AUTO_MCSPI1_MASK			(1 << 17)
+#define OMAP24XX_AUTO_MCBSP2_MASK			(1 << 16)
+#define OMAP24XX_AUTO_MCBSP1_MASK			(1 << 15)
+#define OMAP24XX_AUTO_GPT12_MASK			(1 << 14)
+#define OMAP24XX_AUTO_GPT11_MASK			(1 << 13)
+#define OMAP24XX_AUTO_GPT10_MASK			(1 << 12)
+#define OMAP24XX_AUTO_GPT9_MASK				(1 << 11)
+#define OMAP24XX_AUTO_GPT8_MASK				(1 << 10)
+#define OMAP24XX_AUTO_GPT7_MASK				(1 << 9)
+#define OMAP24XX_AUTO_GPT6_MASK				(1 << 8)
+#define OMAP24XX_AUTO_GPT5_MASK				(1 << 7)
+#define OMAP24XX_AUTO_GPT4_MASK				(1 << 6)
+#define OMAP24XX_AUTO_GPT3_MASK				(1 << 5)
+#define OMAP24XX_AUTO_GPT2_MASK				(1 << 4)
+#define OMAP2420_AUTO_VLYNQ_MASK			(1 << 3)
+#define OMAP24XX_AUTO_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC				(1 << 11)
-#define OMAP2430_AUTO_GPIO5				(1 << 10)
-#define OMAP2430_AUTO_MCSPI3				(1 << 9)
-#define OMAP2430_AUTO_MMCHS2				(1 << 8)
-#define OMAP2430_AUTO_MMCHS1				(1 << 7)
-#define OMAP2430_AUTO_USBHS				(1 << 6)
-#define OMAP2430_AUTO_MCBSP5				(1 << 5)
-#define OMAP2430_AUTO_MCBSP4				(1 << 4)
-#define OMAP2430_AUTO_MCBSP3				(1 << 3)
-#define OMAP24XX_AUTO_UART3				(1 << 2)
-#define OMAP24XX_AUTO_SSI				(1 << 1)
-#define OMAP24XX_AUTO_USB				(1 << 0)
+#define OMAP2430_AUTO_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_AUTO_GPIO5_MASK			(1 << 10)
+#define OMAP2430_AUTO_MCSPI3_MASK			(1 << 9)
+#define OMAP2430_AUTO_MMCHS2_MASK			(1 << 8)
+#define OMAP2430_AUTO_MMCHS1_MASK			(1 << 7)
+#define OMAP2430_AUTO_USBHS_MASK			(1 << 6)
+#define OMAP2430_AUTO_MCBSP5_MASK			(1 << 5)
+#define OMAP2430_AUTO_MCBSP4_MASK			(1 << 4)
+#define OMAP2430_AUTO_MCBSP3_MASK			(1 << 3)
+#define OMAP24XX_AUTO_UART3_MASK			(1 << 2)
+#define OMAP24XX_AUTO_SSI_MASK				(1 << 1)
+#define OMAP24XX_AUTO_USB_MASK				(1 << 0)
 
 /* CM_AUTOIDLE3_CORE */
-#define OMAP24XX_AUTO_SDRC				(1 << 2)
-#define OMAP24XX_AUTO_GPMC				(1 << 1)
-#define OMAP24XX_AUTO_SDMA				(1 << 0)
+#define OMAP24XX_AUTO_SDRC_MASK				(1 << 2)
+#define OMAP24XX_AUTO_GPMC_MASK				(1 << 1)
+#define OMAP24XX_AUTO_SDMA_MASK				(1 << 0)
 
 /* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA				(1 << 4)
-#define OMAP24XX_AUTO_AES				(1 << 3)
-#define OMAP24XX_AUTO_RNG				(1 << 2)
-#define OMAP24XX_AUTO_SHA				(1 << 1)
-#define OMAP24XX_AUTO_DES				(1 << 0)
+#define OMAP24XX_AUTO_PKA_MASK				(1 << 4)
+#define OMAP24XX_AUTO_AES_MASK				(1 << 3)
+#define OMAP24XX_AUTO_RNG_MASK				(1 << 2)
+#define OMAP24XX_AUTO_SHA_MASK				(1 << 1)
+#define OMAP24XX_AUTO_DES_MASK				(1 << 0)
 
 /* CM_CLKSEL1_CORE */
 #define OMAP24XX_CLKSEL_USB_SHIFT			25
@@ -269,9 +269,9 @@
 
 /* CM_FCLKEN_GFX */
 #define OMAP24XX_EN_3D_SHIFT				2
-#define OMAP24XX_EN_3D					(1 << 2)
+#define OMAP24XX_EN_3D_MASK				(1 << 2)
 #define OMAP24XX_EN_2D_SHIFT				1
-#define OMAP24XX_EN_2D					(1 << 1)
+#define OMAP24XX_EN_2D_MASK				(1 << 1)
 
 /* CM_ICLKEN_GFX specific bits */
 
@@ -287,13 +287,13 @@
 
 /* CM_ICLKEN_WKUP specific bits */
 #define OMAP2430_EN_ICR_SHIFT				6
-#define OMAP2430_EN_ICR					(1 << 6)
+#define OMAP2430_EN_ICR_MASK				(1 << 6)
 #define OMAP24XX_EN_OMAPCTRL_SHIFT			5
-#define OMAP24XX_EN_OMAPCTRL				(1 << 5)
+#define OMAP24XX_EN_OMAPCTRL_MASK			(1 << 5)
 #define OMAP24XX_EN_WDT1_SHIFT				4
-#define OMAP24XX_EN_WDT1				(1 << 4)
+#define OMAP24XX_EN_WDT1_MASK				(1 << 4)
 #define OMAP24XX_EN_32KSYNC_SHIFT			1
-#define OMAP24XX_EN_32KSYNC				(1 << 1)
+#define OMAP24XX_EN_32KSYNC_MASK			(1 << 1)
 
 /* CM_IDLEST_WKUP specific bits */
 #define OMAP2430_ST_ICR_SHIFT				6
@@ -308,12 +308,12 @@
 #define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 
 /* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
-#define OMAP24XX_AUTO_WDT1				(1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT				(1 << 3)
-#define OMAP24XX_AUTO_GPIOS				(1 << 2)
-#define OMAP24XX_AUTO_32KSYNC				(1 << 1)
-#define OMAP24XX_AUTO_GPT1				(1 << 0)
+#define OMAP24XX_AUTO_OMAPCTRL_MASK			(1 << 5)
+#define OMAP24XX_AUTO_WDT1_MASK				(1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT_MASK			(1 << 3)
+#define OMAP24XX_AUTO_GPIOS_MASK			(1 << 2)
+#define OMAP24XX_AUTO_32KSYNC_MASK			(1 << 1)
+#define OMAP24XX_AUTO_GPT1_MASK				(1 << 0)
 
 /* CM_CLKSEL_WKUP */
 #define OMAP24XX_CLKSEL_GPT1_SHIFT			0
@@ -328,12 +328,12 @@
 #define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
 
 /* CM_IDLEST_CKGEN */
-#define OMAP24XX_ST_54M_APLL				(1 << 9)
-#define OMAP24XX_ST_96M_APLL				(1 << 8)
-#define OMAP24XX_ST_54M_CLK				(1 << 6)
-#define OMAP24XX_ST_12M_CLK				(1 << 5)
-#define OMAP24XX_ST_48M_CLK				(1 << 4)
-#define OMAP24XX_ST_96M_CLK				(1 << 2)
+#define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
+#define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
+#define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
+#define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)
+#define OMAP24XX_ST_48M_CLK_MASK			(1 << 4)
+#define OMAP24XX_ST_96M_CLK_MASK			(1 << 2)
 #define OMAP24XX_ST_CORE_CLK_SHIFT			0
 #define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
 
@@ -355,11 +355,11 @@
 #define OMAP24XX_DPLL_DIV_SHIFT				8
 #define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
 #define OMAP24XX_54M_SOURCE_SHIFT			5
-#define OMAP24XX_54M_SOURCE				(1 << 5)
+#define OMAP24XX_54M_SOURCE_MASK			(1 << 5)
 #define OMAP2430_96M_SOURCE_SHIFT			4
-#define OMAP2430_96M_SOURCE				(1 << 4)
+#define OMAP2430_96M_SOURCE_MASK			(1 << 4)
 #define OMAP24XX_48M_SOURCE_SHIFT			3
-#define OMAP24XX_48M_SOURCE				(1 << 3)
+#define OMAP24XX_48M_SOURCE_MASK			(1 << 3)
 #define OMAP2430_ALTCLK_SOURCE_SHIFT			0
 #define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
 
@@ -369,29 +369,29 @@
 
 /* CM_FCLKEN_DSP */
 #define OMAP2420_EN_IVA_COP_SHIFT			10
-#define OMAP2420_EN_IVA_COP				(1 << 10)
+#define OMAP2420_EN_IVA_COP_MASK			(1 << 10)
 #define OMAP2420_EN_IVA_MPU_SHIFT			8
-#define OMAP2420_EN_IVA_MPU				(1 << 8)
+#define OMAP2420_EN_IVA_MPU_MASK			(1 << 8)
 #define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP			(1 << 0)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK		(1 << 0)
 
 /* CM_ICLKEN_DSP */
 #define OMAP2420_EN_DSP_IPI_SHIFT			1
-#define OMAP2420_EN_DSP_IPI				(1 << 1)
+#define OMAP2420_EN_DSP_IPI_MASK			(1 << 1)
 
 /* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA					(1 << 8)
-#define OMAP2420_ST_IPI					(1 << 1)
-#define OMAP24XX_ST_DSP					(1 << 0)
+#define OMAP2420_ST_IVA_MASK				(1 << 8)
+#define OMAP2420_ST_IPI_MASK				(1 << 1)
+#define OMAP24XX_ST_DSP_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI				(1 << 1)
+#define OMAP2420_AUTO_DSP_IPI_MASK			(1 << 1)
 
 /* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA				(1 << 13)
+#define OMAP2420_SYNC_IVA_MASK				(1 << 13)
 #define OMAP2420_CLKSEL_IVA_SHIFT			8
 #define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
-#define OMAP24XX_SYNC_DSP				(1 << 7)
+#define OMAP24XX_SYNC_DSP_MASK				(1 << 7)
 #define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
 #define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
 #define OMAP24XX_CLKSEL_DSP_SHIFT			0
@@ -406,24 +406,24 @@
 /* CM_FCLKEN_MDM */
 /* 2430 only */
 #define OMAP2430_EN_OSC_SHIFT				1
-#define OMAP2430_EN_OSC					(1 << 1)
+#define OMAP2430_EN_OSC_MASK				(1 << 1)
 
 /* CM_ICLKEN_MDM */
 /* 2430 only */
 #define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM			(1 << 0)
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK		(1 << 0)
 
 /* CM_IDLEST_MDM specific bits */
 /* 2430 only */
 
 /* CM_AUTOIDLE_MDM */
 /* 2430 only */
-#define OMAP2430_AUTO_OSC				(1 << 1)
-#define OMAP2430_AUTO_MDM				(1 << 0)
+#define OMAP2430_AUTO_OSC_MASK				(1 << 1)
+#define OMAP2430_AUTO_MDM_MASK				(1 << 0)
 
 /* CM_CLKSEL_MDM */
 /* 2430 only */
-#define OMAP2430_SYNC_MDM				(1 << 4)
+#define OMAP2430_SYNC_MDM_MASK				(1 << 4)
 #define OMAP2430_CLKSEL_MDM_SHIFT			0
 #define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
 
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6923deb..fe82b79 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -21,15 +21,15 @@
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_EN_MMC3_SHIFT			30
-#define OMAP3430_EN_MSPRO				(1 << 23)
+#define OMAP3430_EN_MSPRO_MASK				(1 << 23)
 #define OMAP3430_EN_MSPRO_SHIFT				23
-#define OMAP3430_EN_HDQ					(1 << 22)
+#define OMAP3430_EN_HDQ_MASK				(1 << 22)
 #define OMAP3430_EN_HDQ_SHIFT				22
-#define OMAP3430ES1_EN_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_EN_D2D				(1 << 3)
+#define OMAP3430ES1_EN_D2D_MASK				(1 << 3)
 #define OMAP3430ES1_EN_D2D_SHIFT			3
-#define OMAP3430_EN_SSI					(1 << 0)
+#define OMAP3430_EN_SSI_MASK				(1 << 0)
 #define OMAP3430_EN_SSI_SHIFT				0
 
 /* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
@@ -37,25 +37,25 @@
 #define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
 
 /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2				(1 << 5)
+#define OMAP3430_EN_WDT2_MASK				(1 << 5)
 #define OMAP3430_EN_WDT2_SHIFT				5
 
 /* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM					(1 << 0)
+#define OMAP3430_EN_CAM_MASK				(1 << 0)
 #define OMAP3430_EN_CAM_SHIFT				0
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3				(1 << 12)
+#define OMAP3430_EN_WDT3_MASK				(1 << 12)
 #define OMAP3430_EN_WDT3_SHIFT				12
 
 /* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE			(1 << 19)
+#define OMAP3430_OVERRIDE_ENABLE_MASK			(1 << 19)
 
 
 /* Bits specific to each register */
 
 /* CM_FCLKEN_IVA2 */
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
 
 /* CM_CLKEN_PLL_IVA2 */
@@ -69,7 +69,7 @@
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_IVA2 */
-#define OMAP3430_ST_IVA2				(1 << 0)
+#define OMAP3430_ST_IVA2_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
 #define OMAP3430_ST_IVA2_CLK_SHIFT			0
@@ -114,7 +114,7 @@
 #define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU					(1 << 0)
+#define OMAP3430_ST_MPU_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
 #define OMAP3430_ST_MPU_CLK_SHIFT			0
@@ -145,44 +145,50 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_MASK				(1 << 31)
 #define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR					(1 << 29)
+#define OMAP3430_EN_ICR_MASK				(1 << 29)
 #define OMAP3430_EN_ICR_SHIFT				29
-#define OMAP3430_EN_AES2				(1 << 28)
+#define OMAP3430_EN_AES2_MASK				(1 << 28)
 #define OMAP3430_EN_AES2_SHIFT				28
-#define OMAP3430_EN_SHA12				(1 << 27)
+#define OMAP3430_EN_SHA12_MASK				(1 << 27)
 #define OMAP3430_EN_SHA12_SHIFT				27
-#define OMAP3430_EN_DES2				(1 << 26)
+#define OMAP3430_EN_DES2_MASK				(1 << 26)
 #define OMAP3430_EN_DES2_SHIFT				26
-#define OMAP3430ES1_EN_FAC				(1 << 8)
+#define OMAP3430ES1_EN_FAC_MASK				(1 << 8)
 #define OMAP3430ES1_EN_FAC_SHIFT			8
-#define OMAP3430_EN_MAILBOXES				(1 << 7)
+#define OMAP3430_EN_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
-#define OMAP3430_EN_OMAPCTRL				(1 << 6)
+#define OMAP3430_EN_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
-#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_MASK				(1 << 3)
 #define OMAP3430_EN_SAD2D_SHIFT				3
-#define OMAP3430_EN_SDRC				(1 << 1)
+#define OMAP3430_EN_SDRC_MASK				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
+/* AM35XX specific CM_ICLKEN1_CORE bits */
+#define AM35XX_EN_IPSS_MASK				(1 << 4)
+#define AM35XX_EN_IPSS_SHIFT				4
+#define AM35XX_EN_UART4_MASK				(1 << 23)
+#define AM35XX_EN_UART4_SHIFT				23
+
 /* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA					(1 << 4)
+#define OMAP3430_EN_PKA_MASK				(1 << 4)
 #define OMAP3430_EN_PKA_SHIFT				4
-#define OMAP3430_EN_AES1				(1 << 3)
+#define OMAP3430_EN_AES1_MASK				(1 << 3)
 #define OMAP3430_EN_AES1_SHIFT				3
-#define OMAP3430_EN_RNG					(1 << 2)
+#define OMAP3430_EN_RNG_MASK				(1 << 2)
 #define OMAP3430_EN_RNG_SHIFT				2
-#define OMAP3430_EN_SHA11				(1 << 1)
+#define OMAP3430_EN_SHA11_MASK				(1 << 1)
 #define OMAP3430_EN_SHA11_SHIFT				1
-#define OMAP3430_EN_DES1				(1 << 0)
+#define OMAP3430_EN_DES1_MASK				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
 /* CM_ICLKEN3_CORE */
 #define OMAP3430_EN_MAD2D_SHIFT				3
-#define OMAP3430_EN_MAD2D				(1 << 3)
+#define OMAP3430_EN_MAD2D_MASK				(1 << 3)
 
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
@@ -220,6 +226,10 @@
 #define OMAP3430_ST_SSI_STDBY_SHIFT			0
 #define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
 
+/* AM35xx specific CM_IDLEST1_CORE bits */
+#define AM35XX_ST_IPSS_SHIFT				5
+#define AM35XX_ST_IPSS_MASK 				(1 << 5)
+
 /* CM_IDLEST2_CORE */
 #define OMAP3430_ST_PKA_SHIFT				4
 #define OMAP3430_ST_PKA_MASK				(1 << 4)
@@ -239,79 +249,79 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_MASK			(1 << 31)
 #define OMAP3430_AUTO_MODEM_SHIFT			31
-#define OMAP3430ES2_AUTO_MMC3				(1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
-#define OMAP3430ES2_AUTO_ICR				(1 << 29)
+#define OMAP3430ES2_AUTO_ICR_MASK			(1 << 29)
 #define OMAP3430ES2_AUTO_ICR_SHIFT			29
-#define OMAP3430_AUTO_AES2				(1 << 28)
+#define OMAP3430_AUTO_AES2_MASK				(1 << 28)
 #define OMAP3430_AUTO_AES2_SHIFT			28
-#define OMAP3430_AUTO_SHA12				(1 << 27)
+#define OMAP3430_AUTO_SHA12_MASK			(1 << 27)
 #define OMAP3430_AUTO_SHA12_SHIFT			27
-#define OMAP3430_AUTO_DES2				(1 << 26)
+#define OMAP3430_AUTO_DES2_MASK				(1 << 26)
 #define OMAP3430_AUTO_DES2_SHIFT			26
-#define OMAP3430_AUTO_MMC2				(1 << 25)
+#define OMAP3430_AUTO_MMC2_MASK				(1 << 25)
 #define OMAP3430_AUTO_MMC2_SHIFT			25
-#define OMAP3430_AUTO_MMC1				(1 << 24)
+#define OMAP3430_AUTO_MMC1_MASK				(1 << 24)
 #define OMAP3430_AUTO_MMC1_SHIFT			24
-#define OMAP3430_AUTO_MSPRO				(1 << 23)
+#define OMAP3430_AUTO_MSPRO_MASK			(1 << 23)
 #define OMAP3430_AUTO_MSPRO_SHIFT			23
-#define OMAP3430_AUTO_HDQ				(1 << 22)
+#define OMAP3430_AUTO_HDQ_MASK				(1 << 22)
 #define OMAP3430_AUTO_HDQ_SHIFT				22
-#define OMAP3430_AUTO_MCSPI4				(1 << 21)
+#define OMAP3430_AUTO_MCSPI4_MASK			(1 << 21)
 #define OMAP3430_AUTO_MCSPI4_SHIFT			21
-#define OMAP3430_AUTO_MCSPI3				(1 << 20)
+#define OMAP3430_AUTO_MCSPI3_MASK			(1 << 20)
 #define OMAP3430_AUTO_MCSPI3_SHIFT			20
-#define OMAP3430_AUTO_MCSPI2				(1 << 19)
+#define OMAP3430_AUTO_MCSPI2_MASK			(1 << 19)
 #define OMAP3430_AUTO_MCSPI2_SHIFT			19
-#define OMAP3430_AUTO_MCSPI1				(1 << 18)
+#define OMAP3430_AUTO_MCSPI1_MASK			(1 << 18)
 #define OMAP3430_AUTO_MCSPI1_SHIFT			18
-#define OMAP3430_AUTO_I2C3				(1 << 17)
+#define OMAP3430_AUTO_I2C3_MASK				(1 << 17)
 #define OMAP3430_AUTO_I2C3_SHIFT			17
-#define OMAP3430_AUTO_I2C2				(1 << 16)
+#define OMAP3430_AUTO_I2C2_MASK				(1 << 16)
 #define OMAP3430_AUTO_I2C2_SHIFT			16
-#define OMAP3430_AUTO_I2C1				(1 << 15)
+#define OMAP3430_AUTO_I2C1_MASK				(1 << 15)
 #define OMAP3430_AUTO_I2C1_SHIFT			15
-#define OMAP3430_AUTO_UART2				(1 << 14)
+#define OMAP3430_AUTO_UART2_MASK			(1 << 14)
 #define OMAP3430_AUTO_UART2_SHIFT			14
-#define OMAP3430_AUTO_UART1				(1 << 13)
+#define OMAP3430_AUTO_UART1_MASK			(1 << 13)
 #define OMAP3430_AUTO_UART1_SHIFT			13
-#define OMAP3430_AUTO_GPT11				(1 << 12)
+#define OMAP3430_AUTO_GPT11_MASK			(1 << 12)
 #define OMAP3430_AUTO_GPT11_SHIFT			12
-#define OMAP3430_AUTO_GPT10				(1 << 11)
+#define OMAP3430_AUTO_GPT10_MASK			(1 << 11)
 #define OMAP3430_AUTO_GPT10_SHIFT			11
-#define OMAP3430_AUTO_MCBSP5				(1 << 10)
+#define OMAP3430_AUTO_MCBSP5_MASK			(1 << 10)
 #define OMAP3430_AUTO_MCBSP5_SHIFT			10
-#define OMAP3430_AUTO_MCBSP1				(1 << 9)
+#define OMAP3430_AUTO_MCBSP1_MASK			(1 << 9)
 #define OMAP3430_AUTO_MCBSP1_SHIFT			9
-#define OMAP3430ES1_AUTO_FAC				(1 << 8)
+#define OMAP3430ES1_AUTO_FAC_MASK			(1 << 8)
 #define OMAP3430ES1_AUTO_FAC_SHIFT			8
-#define OMAP3430_AUTO_MAILBOXES				(1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_AUTO_MAILBOXES_SHIFT			7
-#define OMAP3430_AUTO_OMAPCTRL				(1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
-#define OMAP3430ES1_AUTO_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
-#define OMAP3430_AUTO_HSOTGUSB				(1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_MASK			(1 << 4)
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_AUTO_D2D				(1 << 3)
+#define OMAP3430ES1_AUTO_D2D_MASK			(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
-#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_MASK			(1 << 3)
 #define OMAP3430_AUTO_SAD2D_SHIFT			3
-#define OMAP3430_AUTO_SSI				(1 << 0)
+#define OMAP3430_AUTO_SSI_MASK				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
 /* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA				(1 << 4)
+#define OMAP3430_AUTO_PKA_MASK				(1 << 4)
 #define OMAP3430_AUTO_PKA_SHIFT				4
-#define OMAP3430_AUTO_AES1				(1 << 3)
+#define OMAP3430_AUTO_AES1_MASK				(1 << 3)
 #define OMAP3430_AUTO_AES1_SHIFT			3
-#define OMAP3430_AUTO_RNG				(1 << 2)
+#define OMAP3430_AUTO_RNG_MASK				(1 << 2)
 #define OMAP3430_AUTO_RNG_SHIFT				2
-#define OMAP3430_AUTO_SHA11				(1 << 1)
+#define OMAP3430_AUTO_SHA11_MASK			(1 << 1)
 #define OMAP3430_AUTO_SHA11_SHIFT			1
-#define OMAP3430_AUTO_DES1				(1 << 0)
+#define OMAP3430_AUTO_DES1_MASK				(1 << 0)
 #define OMAP3430_AUTO_DES1_SHIFT			0
 
 /* CM_AUTOIDLE3_CORE */
@@ -321,7 +331,7 @@
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
 #define OMAP3430_AUTO_MAD2D_SHIFT			3
-#define OMAP3430_AUTO_MAD2D				(1 << 3)
+#define OMAP3430_AUTO_MAD2D_MASK			(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
@@ -336,6 +346,8 @@
 #define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
 #define OMAP3430_CLKSEL_L3_SHIFT			0
 #define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
+#define OMAP3630_CLKSEL_96M_SHIFT			12
+#define OMAP3630_CLKSEL_96M_MASK			(0x3 << 12)
 
 /* CM_CLKSTCTRL_CORE */
 #define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
@@ -354,9 +366,9 @@
 #define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
 
 /* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D				(1 << 2)
+#define OMAP3430ES1_EN_3D_MASK				(1 << 2)
 #define OMAP3430ES1_EN_3D_SHIFT				2
-#define OMAP3430ES1_EN_2D				(1 << 1)
+#define OMAP3430ES1_EN_2D_MASK				(1 << 1)
 #define OMAP3430ES1_EN_2D_SHIFT				1
 
 /* CM_ICLKEN_GFX specific bits */
@@ -379,6 +391,10 @@
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
 
+/* CM_IDLEST_SGX */
+#define OMAP3430ES2_ST_SGX_SHIFT			1
+#define OMAP3430ES2_ST_SGX_MASK				(1 << 1)
+
 /* CM_ICLKEN_SGX */
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
@@ -400,9 +416,9 @@
 #define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
 
 /* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1				(1 << 4)
+#define OMAP3430_EN_WDT1_MASK				(1 << 4)
 #define OMAP3430_EN_WDT1_SHIFT				4
-#define OMAP3430_EN_32KSYNC				(1 << 2)
+#define OMAP3430_EN_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_EN_32KSYNC_SHIFT			2
 
 /* CM_IDLEST_WKUP specific bits */
@@ -416,19 +432,19 @@
 #define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 
 /* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP				(1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_MASK			(1 << 9)
 #define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
-#define OMAP3430_AUTO_WDT2				(1 << 5)
+#define OMAP3430_AUTO_WDT2_MASK				(1 << 5)
 #define OMAP3430_AUTO_WDT2_SHIFT			5
-#define OMAP3430_AUTO_WDT1				(1 << 4)
+#define OMAP3430_AUTO_WDT1_MASK				(1 << 4)
 #define OMAP3430_AUTO_WDT1_SHIFT			4
-#define OMAP3430_AUTO_GPIO1				(1 << 3)
+#define OMAP3430_AUTO_GPIO1_MASK			(1 << 3)
 #define OMAP3430_AUTO_GPIO1_SHIFT			3
-#define OMAP3430_AUTO_32KSYNC				(1 << 2)
+#define OMAP3430_AUTO_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_AUTO_32KSYNC_SHIFT			2
-#define OMAP3430_AUTO_GPT12				(1 << 1)
+#define OMAP3430_AUTO_GPT12_MASK			(1 << 1)
 #define OMAP3430_AUTO_GPT12_SHIFT			1
-#define OMAP3430_AUTO_GPT1				(1 << 0)
+#define OMAP3430_AUTO_GPT1_MASK				(1 << 0)
 #define OMAP3430_AUTO_GPT1_SHIFT			0
 
 /* CM_CLKSEL_WKUP */
@@ -463,7 +479,7 @@
 #define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
 
 /* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT		10
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT	10
 #define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
@@ -472,10 +488,10 @@
 #define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
 
 /* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK				(1 << 5)
-#define OMAP3430_ST_12M_CLK				(1 << 4)
-#define OMAP3430_ST_48M_CLK				(1 << 3)
-#define OMAP3430_ST_96M_CLK				(1 << 2)
+#define OMAP3430_ST_54M_CLK_MASK			(1 << 5)
+#define OMAP3430_ST_12M_CLK_MASK			(1 << 4)
+#define OMAP3430_ST_48M_CLK_MASK			(1 << 3)
+#define OMAP3430_ST_96M_CLK_MASK			(1 << 2)
 #define OMAP3430_ST_PERIPH_CLK_SHIFT			1
 #define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
 #define OMAP3430_ST_CORE_CLK_SHIFT			0
@@ -517,12 +533,18 @@
 /* CM_CLKSEL2_PLL */
 #define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
 #define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3630_PERIPH_DPLL_MULT_MASK			(0xfff << 8)
 #define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
 #define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT		21
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK		(0x7 << 21)
+#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT		24
+#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK		(0xff << 24)
 
 /* CM_CLKSEL3_PLL */
 #define OMAP3430_DIV_96M_SHIFT				0
 #define OMAP3430_DIV_96M_MASK				(0x1f << 0)
+#define OMAP3630_DIV_96M_MASK				(0x3f << 0)
 
 /* CM_CLKSEL4_PLL */
 #define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
@@ -536,22 +558,22 @@
 
 /* CM_CLKOUT_CTRL */
 #define OMAP3430_CLKOUT2_EN_SHIFT			7
-#define OMAP3430_CLKOUT2_EN				(1 << 7)
+#define OMAP3430_CLKOUT2_EN_MASK			(1 << 7)
 #define OMAP3430_CLKOUT2_DIV_SHIFT			3
 #define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
 #define OMAP3430_CLKOUT2SOURCE_SHIFT			0
 #define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
 
 /* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV					(1 << 2)
+#define OMAP3430_EN_TV_MASK				(1 << 2)
 #define OMAP3430_EN_TV_SHIFT				2
-#define OMAP3430_EN_DSS2				(1 << 1)
+#define OMAP3430_EN_DSS2_MASK				(1 << 1)
 #define OMAP3430_EN_DSS2_SHIFT				1
-#define OMAP3430_EN_DSS1				(1 << 0)
+#define OMAP3430_EN_DSS1_MASK				(1 << 0)
 #define OMAP3430_EN_DSS1_SHIFT				0
 
 /* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK		(1 << 0)
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
 
 /* CM_IDLEST_DSS */
@@ -563,14 +585,16 @@
 #define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS				(1 << 0)
+#define OMAP3430_AUTO_DSS_MASK				(1 << 0)
 #define OMAP3430_AUTO_DSS_SHIFT				0
 
 /* CM_CLKSEL_DSS */
 #define OMAP3430_CLKSEL_TV_SHIFT			8
 #define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
+#define OMAP3630_CLKSEL_TV_MASK				(0x3f << 8)
 #define OMAP3430_CLKSEL_DSS1_SHIFT			0
 #define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
+#define OMAP3630_CLKSEL_DSS1_MASK			(0x3f << 0)
 
 /* CM_SLEEPDEP_DSS specific bits */
 
@@ -583,21 +607,22 @@
 #define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
 
 /* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2				(1 << 1)
+#define OMAP3430_EN_CSI2_MASK				(1 << 1)
 #define OMAP3430_EN_CSI2_SHIFT				1
 
 /* CM_ICLKEN_CAM specific bits */
 
 /* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM					(1 << 0)
+#define OMAP3430_ST_CAM_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM				(1 << 0)
+#define OMAP3430_AUTO_CAM_MASK				(1 << 0)
 #define OMAP3430_AUTO_CAM_SHIFT				0
 
 /* CM_CLKSEL_CAM */
 #define OMAP3430_CLKSEL_CAM_SHIFT			0
 #define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
+#define OMAP3630_CLKSEL_CAM_MASK			(0x3f << 0)
 
 /* CM_SLEEPDEP_CAM specific bits */
 
@@ -624,41 +649,41 @@
 #define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
-#define OMAP3430_AUTO_GPIO6				(1 << 17)
+#define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
 #define OMAP3430_AUTO_GPIO6_SHIFT			17
-#define OMAP3430_AUTO_GPIO5				(1 << 16)
+#define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
 #define OMAP3430_AUTO_GPIO5_SHIFT			16
-#define OMAP3430_AUTO_GPIO4				(1 << 15)
+#define OMAP3430_AUTO_GPIO4_MASK			(1 << 15)
 #define OMAP3430_AUTO_GPIO4_SHIFT			15
-#define OMAP3430_AUTO_GPIO3				(1 << 14)
+#define OMAP3430_AUTO_GPIO3_MASK			(1 << 14)
 #define OMAP3430_AUTO_GPIO3_SHIFT			14
-#define OMAP3430_AUTO_GPIO2				(1 << 13)
+#define OMAP3430_AUTO_GPIO2_MASK			(1 << 13)
 #define OMAP3430_AUTO_GPIO2_SHIFT			13
-#define OMAP3430_AUTO_WDT3				(1 << 12)
+#define OMAP3430_AUTO_WDT3_MASK				(1 << 12)
 #define OMAP3430_AUTO_WDT3_SHIFT			12
-#define OMAP3430_AUTO_UART3				(1 << 11)
+#define OMAP3430_AUTO_UART3_MASK			(1 << 11)
 #define OMAP3430_AUTO_UART3_SHIFT			11
-#define OMAP3430_AUTO_GPT9				(1 << 10)
+#define OMAP3430_AUTO_GPT9_MASK				(1 << 10)
 #define OMAP3430_AUTO_GPT9_SHIFT			10
-#define OMAP3430_AUTO_GPT8				(1 << 9)
+#define OMAP3430_AUTO_GPT8_MASK				(1 << 9)
 #define OMAP3430_AUTO_GPT8_SHIFT			9
-#define OMAP3430_AUTO_GPT7				(1 << 8)
+#define OMAP3430_AUTO_GPT7_MASK				(1 << 8)
 #define OMAP3430_AUTO_GPT7_SHIFT			8
-#define OMAP3430_AUTO_GPT6				(1 << 7)
+#define OMAP3430_AUTO_GPT6_MASK				(1 << 7)
 #define OMAP3430_AUTO_GPT6_SHIFT			7
-#define OMAP3430_AUTO_GPT5				(1 << 6)
+#define OMAP3430_AUTO_GPT5_MASK				(1 << 6)
 #define OMAP3430_AUTO_GPT5_SHIFT			6
-#define OMAP3430_AUTO_GPT4				(1 << 5)
+#define OMAP3430_AUTO_GPT4_MASK				(1 << 5)
 #define OMAP3430_AUTO_GPT4_SHIFT			5
-#define OMAP3430_AUTO_GPT3				(1 << 4)
+#define OMAP3430_AUTO_GPT3_MASK				(1 << 4)
 #define OMAP3430_AUTO_GPT3_SHIFT			4
-#define OMAP3430_AUTO_GPT2				(1 << 3)
+#define OMAP3430_AUTO_GPT2_MASK				(1 << 3)
 #define OMAP3430_AUTO_GPT2_SHIFT			3
-#define OMAP3430_AUTO_MCBSP4				(1 << 2)
+#define OMAP3430_AUTO_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_AUTO_MCBSP4_SHIFT			2
-#define OMAP3430_AUTO_MCBSP3				(1 << 1)
+#define OMAP3430_AUTO_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_AUTO_MCBSP3_SHIFT			1
-#define OMAP3430_AUTO_MCBSP2				(1 << 0)
+#define OMAP3430_AUTO_MCBSP2_MASK			(1 << 0)
 #define OMAP3430_AUTO_MCBSP2_SHIFT			0
 
 /* CM_CLKSEL_PER */
@@ -680,7 +705,7 @@
 #define OMAP3430_CLKSEL_GPT2_SHIFT			0
 
 /* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2		(1 << 2)
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK		(1 << 2)
 
 /* CM_CLKSTCTRL_PER */
 #define OMAP3430_CLKTRCTRL_PER_SHIFT			0
@@ -693,6 +718,7 @@
 /* CM_CLKSEL1_EMU */
 #define OMAP3430_DIV_DPLL4_SHIFT			24
 #define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
+#define OMAP3630_DIV_DPLL4_MASK				(0x3f << 24)
 #define OMAP3430_DIV_DPLL3_SHIFT			16
 #define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
 #define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
@@ -729,10 +755,10 @@
 #define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
 
 /* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL				(1 << 0)
+#define OMAP3430_CLKOUT2_POL_MASK			(1 << 0)
 
 /* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON				(1 << 0)
+#define OMAP3430_ST_NEON_MASK				(1 << 0)
 
 /* CM_CLKSTCTRL_NEON */
 #define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 0e67f75..ac8458e 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -26,7 +26,7 @@
 
 
 /* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_ABE_DYNDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_DYNDEP_SHIFT				3
 #define OMAP4430_ABE_DYNDEP_MASK				BITFIELD(3, 3)
 
 /*
@@ -34,15 +34,15 @@
  * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
  * CM_TESLA_STATICDEP
  */
-#define OMAP4430_ABE_STATDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_STATDEP_SHIFT				3
 #define OMAP4430_ABE_STATDEP_MASK				BITFIELD(3, 3)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				(1 << 16)
+#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
 #define OMAP4430_ALWONCORE_DYNDEP_MASK				BITFIELD(16, 16)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_ALWONCORE_STATDEP_SHIFT			(1 << 16)
+#define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
 #define OMAP4430_ALWONCORE_STATDEP_MASK				BITFIELD(16, 16)
 
 /*
@@ -50,371 +50,371 @@
  * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
  * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU
  */
-#define OMAP4430_AUTO_DPLL_MODE_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
 #define OMAP4430_AUTO_DPLL_MODE_MASK				BITFIELD(0, 2)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_CEFUSE_DYNDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
 #define OMAP4430_CEFUSE_DYNDEP_MASK				BITFIELD(17, 17)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_CEFUSE_STATDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_STATDEP_SHIFT				17
 #define OMAP4430_CEFUSE_STATDEP_MASK				BITFIELD(17, 17)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			BITFIELD(13, 13)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		BITFIELD(12, 12)
 
 /* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			BITFIELD(11, 11)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			BITFIELD(11, 11)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		BITFIELD(12, 12)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		BITFIELD(13, 13)
 
 /* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		BITFIELD(9, 9)
 
 /* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		BITFIELD(9, 9)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		BITFIELD(9, 9)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			BITFIELD(11, 11)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			(1 << 12)
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			BITFIELD(12, 12)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			(1 << 13)
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			BITFIELD(13, 13)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			(1 << 14)
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			BITFIELD(14, 14)
 
 /* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		BITFIELD(10, 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_DUCATI_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT		10
 #define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK		BITFIELD(10, 10)
 
 /* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		BITFIELD(15, 15)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		BITFIELD(10, 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		BITFIELD(11, 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		BITFIELD(20, 20)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		(1 << 26)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			BITFIELD(26, 26)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		BITFIELD(21, 21)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		(1 << 27)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			BITFIELD(27, 27)
 
 /* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT		(1 << 31)
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT		31
 #define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK		BITFIELD(31, 31)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		BITFIELD(13, 13)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		BITFIELD(12, 12)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		(1 << 28)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		BITFIELD(28, 28)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		(1 << 29)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		BITFIELD(29, 29)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		BITFIELD(11, 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		BITFIELD(16, 16)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		BITFIELD(17, 17)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		BITFIELD(18, 18)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		BITFIELD(19, 19)
 
 /* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_IVAHD_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT	(1 << 14)
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT	14
 #define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK		BITFIELD(14, 14)
 
 /* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_SDMA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		BITFIELD(8, 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		BITFIELD(8, 8)
 
 /* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		BITFIELD(8, 8)
 
 /* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		BITFIELD(9, 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			BITFIELD(12, 12)
 
 /* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		BITFIELD(16, 16)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			BITFIELD(17, 17)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			BITFIELD(18, 18)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			BITFIELD(19, 19)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		BITFIELD(25, 25)
 
 /* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT		10
 #define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK		BITFIELD(10, 10)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		BITFIELD(20, 20)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		21
 #define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		BITFIELD(21, 21)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		BITFIELD(22, 22)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			BITFIELD(24, 24)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		BITFIELD(11, 11)
 
 /* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
 #define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_TESLA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			BITFIELD(22, 22)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		(1 << 23)
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			BITFIELD(23, 23)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			BITFIELD(24, 24)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		BITFIELD(15, 15)
 
 /* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		(1 << 30)
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			BITFIELD(30, 30)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		BITFIELD(25, 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		BITFIELD(11, 11)
 
 /*
@@ -426,7 +426,7 @@
  * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
  * CM1_ABE_TIMER8_CLKCTRL
  */
-#define OMAP4430_CLKSEL_SHIFT					(1 << 24)
+#define OMAP4430_CLKSEL_SHIFT					24
 #define OMAP4430_CLKSEL_MASK					BITFIELD(24, 24)
 
 /*
@@ -434,43 +434,43 @@
  * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT,
  * CM_CLKSEL_USB_60MHZ
  */
-#define OMAP4430_CLKSEL_0_0_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_0_SHIFT				0
 #define OMAP4430_CLKSEL_0_0_MASK				BITFIELD(0, 0)
 
 /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
-#define OMAP4430_CLKSEL_0_1_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_1_SHIFT				0
 #define OMAP4430_CLKSEL_0_1_MASK				BITFIELD(0, 1)
 
 /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
-#define OMAP4430_CLKSEL_24_25_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_24_25_SHIFT				24
 #define OMAP4430_CLKSEL_24_25_MASK				BITFIELD(24, 25)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_CLKSEL_60M_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_60M_SHIFT				24
 #define OMAP4430_CLKSEL_60M_MASK				BITFIELD(24, 24)
 
 /* Used by CM1_ABE_AESS_CLKCTRL */
-#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_AESS_FCLK_MASK				BITFIELD(24, 24)
 
 /* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_CORE_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_CORE_SHIFT				0
 #define OMAP4430_CLKSEL_CORE_MASK				BITFIELD(0, 0)
 
 /* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				(1 << 1)
+#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
 #define OMAP4430_CLKSEL_CORE_1_1_MASK				BITFIELD(1, 1)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
-#define OMAP4430_CLKSEL_DIV_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_DIV_SHIFT				24
 #define OMAP4430_CLKSEL_DIV_MASK				BITFIELD(24, 24)
 
 /* Used by CM_CAM_FDIF_CLKCTRL */
-#define OMAP4430_CLKSEL_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_FCLK_MASK				BITFIELD(24, 25)
 
 /* Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			(1 << 25)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			BITFIELD(25, 25)
 
 /*
@@ -478,58 +478,58 @@
  * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
  * CM1_ABE_MCBSP3_CLKCTRL
  */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	(1 << 26)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	BITFIELD(26, 27)
 
 /* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L3_SHIFT				(1 << 4)
+#define OMAP4430_CLKSEL_L3_SHIFT				4
 #define OMAP4430_CLKSEL_L3_MASK					BITFIELD(4, 4)
 
 /* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				(1 << 2)
+#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
 #define OMAP4430_CLKSEL_L3_SHADOW_MASK				BITFIELD(2, 2)
 
 /* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L4_SHIFT				(1 << 8)
+#define OMAP4430_CLKSEL_L4_SHIFT				8
 #define OMAP4430_CLKSEL_L4_MASK					BITFIELD(8, 8)
 
 /* Used by CM_CLKSEL_ABE */
-#define OMAP4430_CLKSEL_OPP_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_OPP_SHIFT				0
 #define OMAP4430_CLKSEL_OPP_MASK				BITFIELD(0, 1)
 
 /* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_PER_192M_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_PER_192M_SHIFT				25
 #define OMAP4430_CLKSEL_PER_192M_MASK				BITFIELD(25, 26)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			(1 << 27)
+#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
 #define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			BITFIELD(27, 29)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			BITFIELD(24, 26)
 
 /* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_SGX_FCLK_MASK				BITFIELD(24, 24)
 
 /*
  * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
  * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
  */
-#define OMAP4430_CLKSEL_SOURCE_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_SHIFT				24
 #define OMAP4430_CLKSEL_SOURCE_MASK				BITFIELD(24, 25)
 
 /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK			BITFIELD(24, 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
 #define OMAP4430_CLKSEL_UTMI_P1_MASK				BITFIELD(24, 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
 #define OMAP4430_CLKSEL_UTMI_P2_MASK				BITFIELD(25, 25)
 
 /*
@@ -544,23 +544,23 @@
  * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
  * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE
  */
-#define OMAP4430_CLKTRCTRL_SHIFT				(1 << 0)
+#define OMAP4430_CLKTRCTRL_SHIFT				0
 #define OMAP4430_CLKTRCTRL_MASK					BITFIELD(0, 1)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			(1 << 0)
+#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
 #define OMAP4430_CORE_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
 #define OMAP4430_CORE_DPLL_EMU_MULT_MASK			BITFIELD(8, 18)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_D2D_DYNDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_DYNDEP_SHIFT				18
 #define OMAP4430_D2D_DYNDEP_MASK				BITFIELD(18, 18)
 
 /* Used by CM_MPU_STATICDEP */
-#define OMAP4430_D2D_STATDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_STATDEP_SHIFT				18
 #define OMAP4430_D2D_STATDEP_MASK				BITFIELD(18, 18)
 
 /*
@@ -570,19 +570,19 @@
  * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
  * CM_SSC_DELTAMSTEP_DPLL_MPU
  */
-#define OMAP4430_DELTAMSTEP_SHIFT				(1 << 0)
+#define OMAP4430_DELTAMSTEP_SHIFT				0
 #define OMAP4430_DELTAMSTEP_MASK				BITFIELD(0, 19)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_OVERRIDE_SHIFT				(1 << 2)
+#define OMAP4430_DLL_OVERRIDE_SHIFT				2
 #define OMAP4430_DLL_OVERRIDE_MASK				BITFIELD(2, 2)
 
 /* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */
-#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT				(1 << 0)
+#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT				0
 #define OMAP4430_DLL_OVERRIDE_0_0_MASK				BITFIELD(0, 0)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_RESET_SHIFT				(1 << 3)
+#define OMAP4430_DLL_RESET_SHIFT				3
 #define OMAP4430_DLL_RESET_MASK					BITFIELD(3, 3)
 
 /*
@@ -590,40 +590,40 @@
  * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
  * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
  */
-#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				(1 << 23)
+#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
 #define OMAP4430_DPLL_BYP_CLKSEL_MASK				BITFIELD(23, 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			BITFIELD(8, 8)
 
 /* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			(1 << 20)
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			BITFIELD(20, 20)
 
 /*
  * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
  * CM_DIV_M3_DPLL_CORE
  */
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			BITFIELD(0, 4)
 
 /*
  * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
  * CM_DIV_M3_DPLL_CORE
  */
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			BITFIELD(5, 5)
 
 /*
  * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
  * CM_DIV_M3_DPLL_CORE
  */
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			BITFIELD(8, 8)
 
 /* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			(1 << 10)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			BITFIELD(10, 10)
 
 /*
@@ -631,11 +631,11 @@
  * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
  * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
  */
-#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
 #define OMAP4430_DPLL_CLKOUT_DIV_MASK				BITFIELD(0, 4)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			BITFIELD(0, 6)
 
 /*
@@ -643,11 +643,11 @@
  * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
  * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
  */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			BITFIELD(5, 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		(1 << 7)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		BITFIELD(7, 7)
 
 /*
@@ -655,23 +655,23 @@
  * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
  * CM_DIV_M2_DPLL_MPU
  */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			BITFIELD(8, 8)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
 #define OMAP4430_DPLL_CORE_DPLL_EN_MASK				BITFIELD(8, 10)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
 #define OMAP4430_DPLL_CORE_M2_DIV_MASK				BITFIELD(11, 15)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
 #define OMAP4430_DPLL_CORE_M5_DIV_MASK				BITFIELD(3, 7)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT			(1 << 1)
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT			1
 #define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK			BITFIELD(1, 1)
 
 /*
@@ -679,11 +679,11 @@
  * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
  * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
  */
-#define OMAP4430_DPLL_DIV_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_DIV_SHIFT					0
 #define OMAP4430_DPLL_DIV_MASK					BITFIELD(0, 6)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_DIV_0_7_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_DIV_0_7_SHIFT				0
 #define OMAP4430_DPLL_DIV_0_7_MASK				BITFIELD(0, 7)
 
 /*
@@ -691,11 +691,11 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
 #define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			BITFIELD(8, 8)
 
 /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			(1 << 3)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			BITFIELD(3, 3)
 
 /*
@@ -703,7 +703,7 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_EN_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_EN_SHIFT					0
 #define OMAP4430_DPLL_EN_MASK					BITFIELD(0, 2)
 
 /*
@@ -711,7 +711,7 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_LPMODE_EN_SHIFT				(1 << 10)
+#define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
 #define OMAP4430_DPLL_LPMODE_EN_MASK				BITFIELD(10, 10)
 
 /*
@@ -719,11 +719,11 @@
  * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
  * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
  */
-#define OMAP4430_DPLL_MULT_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_SHIFT				8
 #define OMAP4430_DPLL_MULT_MASK					BITFIELD(8, 18)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_MULT_USB_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_USB_SHIFT				8
 #define OMAP4430_DPLL_MULT_USB_MASK				BITFIELD(8, 19)
 
 /*
@@ -731,11 +731,11 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_REGM4XEN_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_REGM4XEN_SHIFT				11
 #define OMAP4430_DPLL_REGM4XEN_MASK				BITFIELD(11, 11)
 
 /* Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_SD_DIV_SHIFT				(1 << 24)
+#define OMAP4430_DPLL_SD_DIV_SHIFT				24
 #define OMAP4430_DPLL_SD_DIV_MASK				BITFIELD(24, 31)
 
 /*
@@ -743,7 +743,7 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_SSC_ACK_SHIFT				(1 << 13)
+#define OMAP4430_DPLL_SSC_ACK_SHIFT				13
 #define OMAP4430_DPLL_SSC_ACK_MASK				BITFIELD(13, 13)
 
 /*
@@ -751,7 +751,7 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			(1 << 14)
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			BITFIELD(14, 14)
 
 /*
@@ -759,154 +759,154 @@
  * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
  * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
  */
-#define OMAP4430_DPLL_SSC_EN_SHIFT				(1 << 12)
+#define OMAP4430_DPLL_SSC_EN_SHIFT				12
 #define OMAP4430_DPLL_SSC_EN_MASK				BITFIELD(12, 12)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_DSS_DYNDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_DYNDEP_SHIFT				8
 #define OMAP4430_DSS_DYNDEP_MASK				BITFIELD(8, 8)
 
 /*
  * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
  * CM_MPU_STATICDEP
  */
-#define OMAP4430_DSS_STATDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_STATDEP_SHIFT				8
 #define OMAP4430_DSS_STATDEP_MASK				BITFIELD(8, 8)
 
 /* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_DUCATI_DYNDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_DYNDEP_SHIFT				0
 #define OMAP4430_DUCATI_DYNDEP_MASK				BITFIELD(0, 0)
 
 /* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */
-#define OMAP4430_DUCATI_STATDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_STATDEP_SHIFT				0
 #define OMAP4430_DUCATI_STATDEP_MASK				BITFIELD(0, 0)
 
 /* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_FREQ_UPDATE_SHIFT				0
 #define OMAP4430_FREQ_UPDATE_MASK				BITFIELD(0, 0)
 
 /* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_GFX_DYNDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_DYNDEP_SHIFT				10
 #define OMAP4430_GFX_DYNDEP_MASK				BITFIELD(10, 10)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_GFX_STATDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_STATDEP_SHIFT				10
 #define OMAP4430_GFX_STATDEP_MASK				BITFIELD(10, 10)
 
 /* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
 #define OMAP4430_GPMC_FREQ_UPDATE_MASK				BITFIELD(0, 0)
 
 /*
  * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
  * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			BITFIELD(0, 4)
 
 /*
  * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
  * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		BITFIELD(5, 5)
 
 /*
  * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
  * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		BITFIELD(8, 8)
 
 /*
  * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
  * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			BITFIELD(12, 12)
 
 /*
  * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
  * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			BITFIELD(0, 4)
 
 /*
  * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
  * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		BITFIELD(5, 5)
 
 /*
  * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
  * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		BITFIELD(8, 8)
 
 /*
  * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
  * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
  */
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			BITFIELD(12, 12)
 
 /*
  * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
  * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
  */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			BITFIELD(0, 4)
 
 /*
  * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
  * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
  */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		BITFIELD(5, 5)
 
 /*
  * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
  * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
  */
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		BITFIELD(8, 8)
 
 /*
  * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
  * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
  */
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			BITFIELD(12, 12)
 
 /*
  * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
  * CM_DIV_M7_DPLL_CORE
  */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			BITFIELD(0, 4)
 
 /*
  * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
  * CM_DIV_M7_DPLL_CORE
  */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		BITFIELD(5, 5)
 
 /*
  * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
  * CM_DIV_M7_DPLL_CORE
  */
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		BITFIELD(8, 8)
 
 /*
  * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
  * CM_DIV_M7_DPLL_CORE
  */
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			BITFIELD(12, 12)
 
 /*
@@ -962,22 +962,22 @@
  * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
  * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
  */
-#define OMAP4430_IDLEST_SHIFT					(1 << 16)
+#define OMAP4430_IDLEST_SHIFT					16
 #define OMAP4430_IDLEST_MASK					BITFIELD(16, 17)
 
 /* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ISS_DYNDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_DYNDEP_SHIFT				9
 #define OMAP4430_ISS_DYNDEP_MASK				BITFIELD(9, 9)
 
 /*
  * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
  * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_ISS_STATDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_STATDEP_SHIFT				9
 #define OMAP4430_ISS_STATDEP_MASK				BITFIELD(9, 9)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_IVAHD_DYNDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_DYNDEP_SHIFT				2
 #define OMAP4430_IVAHD_DYNDEP_MASK				BITFIELD(2, 2)
 
 /*
@@ -986,25 +986,25 @@
  * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP,
  * CM_TESLA_STATICDEP
  */
-#define OMAP4430_IVAHD_STATDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_STATDEP_SHIFT				2
 #define OMAP4430_IVAHD_STATDEP_MASK				BITFIELD(2, 2)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L3INIT_DYNDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_DYNDEP_SHIFT				7
 #define OMAP4430_L3INIT_DYNDEP_MASK				BITFIELD(7, 7)
 
 /*
  * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
  * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_L3INIT_STATDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_STATDEP_SHIFT				7
 #define OMAP4430_L3INIT_STATDEP_MASK				BITFIELD(7, 7)
 
 /*
  * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
  * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
-#define OMAP4430_L3_1_DYNDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_DYNDEP_SHIFT				5
 #define OMAP4430_L3_1_DYNDEP_MASK				BITFIELD(5, 5)
 
 /*
@@ -1013,7 +1013,7 @@
  * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
  * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_L3_1_STATDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_STATDEP_SHIFT				5
 #define OMAP4430_L3_1_STATDEP_MASK				BITFIELD(5, 5)
 
 /*
@@ -1022,7 +1022,7 @@
  * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
  * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP
  */
-#define OMAP4430_L3_2_DYNDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_DYNDEP_SHIFT				6
 #define OMAP4430_L3_2_DYNDEP_MASK				BITFIELD(6, 6)
 
 /*
@@ -1031,11 +1031,11 @@
  * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
  * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_L3_2_STATDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_STATDEP_SHIFT				6
 #define OMAP4430_L3_2_STATDEP_MASK				BITFIELD(6, 6)
 
 /* Used by CM_L3_1_DYNAMICDEP */
-#define OMAP4430_L4CFG_DYNDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_DYNDEP_SHIFT				12
 #define OMAP4430_L4CFG_DYNDEP_MASK				BITFIELD(12, 12)
 
 /*
@@ -1043,11 +1043,11 @@
  * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
  * CM_TESLA_STATICDEP
  */
-#define OMAP4430_L4CFG_STATDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_STATDEP_SHIFT				12
 #define OMAP4430_L4CFG_STATDEP_MASK				BITFIELD(12, 12)
 
 /* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_L4PER_DYNDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_DYNDEP_SHIFT				13
 #define OMAP4430_L4PER_DYNDEP_MASK				BITFIELD(13, 13)
 
 /*
@@ -1055,36 +1055,36 @@
  * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
  * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_L4PER_STATDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_STATDEP_SHIFT				13
 #define OMAP4430_L4PER_STATDEP_MASK				BITFIELD(13, 13)
 
 /* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L4SEC_DYNDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_DYNDEP_SHIFT				14
 #define OMAP4430_L4SEC_DYNDEP_MASK				BITFIELD(14, 14)
 
 /*
  * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
  * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP
  */
-#define OMAP4430_L4SEC_STATDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_STATDEP_SHIFT				14
 #define OMAP4430_L4SEC_STATDEP_MASK				BITFIELD(14, 14)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_L4WKUP_DYNDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
 #define OMAP4430_L4WKUP_DYNDEP_MASK				BITFIELD(15, 15)
 
 /*
  * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
  * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_L4WKUP_STATDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_STATDEP_SHIFT				15
 #define OMAP4430_L4WKUP_STATDEP_MASK				BITFIELD(15, 15)
 
 /*
  * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
  * CM_MPU_DYNAMICDEP
  */
-#define OMAP4430_MEMIF_DYNDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_DYNDEP_SHIFT				4
 #define OMAP4430_MEMIF_DYNDEP_MASK				BITFIELD(4, 4)
 
 /*
@@ -1093,7 +1093,7 @@
  * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
  * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
  */
-#define OMAP4430_MEMIF_STATDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_STATDEP_SHIFT				4
 #define OMAP4430_MEMIF_STATDEP_MASK				BITFIELD(4, 4)
 
 /*
@@ -1103,7 +1103,7 @@
  * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
  * CM_SSC_MODFREQDIV_DPLL_MPU
  */
-#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			(1 << 8)
+#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
 #define OMAP4430_MODFREQDIV_EXPONENT_MASK			BITFIELD(8, 10)
 
 /*
@@ -1113,7 +1113,7 @@
  * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
  * CM_SSC_MODFREQDIV_DPLL_MPU
  */
-#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			(1 << 0)
+#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
 #define OMAP4430_MODFREQDIV_MANTISSA_MASK			BITFIELD(0, 6)
 
 /*
@@ -1169,23 +1169,23 @@
  * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
  * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
  */
-#define OMAP4430_MODULEMODE_SHIFT				(1 << 0)
+#define OMAP4430_MODULEMODE_SHIFT				0
 #define OMAP4430_MODULEMODE_MASK				BITFIELD(0, 1)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
 #define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				9
 #define OMAP4430_OPTFCLKEN_CLK32K_MASK				BITFIELD(9, 9)
 
 /* Used by CM_CAM_ISS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				BITFIELD(8, 8)
 
 /*
@@ -1195,119 +1195,119 @@
  * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
  * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE
  */
-#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
 #define OMAP4430_OPTFCLKEN_DBCLK_MASK				BITFIELD(8, 8)
 
 /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				BITFIELD(8, 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
 #define OMAP4430_OPTFCLKEN_DSSCLK_MASK				BITFIELD(8, 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
 #define OMAP4430_OPTFCLKEN_FCLK0_MASK				BITFIELD(8, 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
 #define OMAP4430_OPTFCLKEN_FCLK1_MASK				BITFIELD(9, 9)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				(1 << 10)
+#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
 #define OMAP4430_OPTFCLKEN_FCLK2_MASK				BITFIELD(10, 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			(1 << 15)
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			BITFIELD(15, 15)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		(1 << 13)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			BITFIELD(13, 13)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		(1 << 14)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			BITFIELD(14, 14)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			(1 << 11)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			BITFIELD(11, 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			(1 << 12)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			BITFIELD(12, 12)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		(1 << 9)
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
 #define OMAP4430_OPTFCLKEN_PHY_48M_MASK				BITFIELD(8, 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			BITFIELD(10, 10)
 
 /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		(1 << 11)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		BITFIELD(11, 11)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
 #define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				BITFIELD(10, 10)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				(1 << 11)
+#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
 #define OMAP4430_OPTFCLKEN_TV_CLK_MASK				BITFIELD(11, 11)
 
 /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			BITFIELD(8, 8)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			BITFIELD(9, 9)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			BITFIELD(10, 10)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
 #define OMAP4430_OPTFCLKEN_XCLK_MASK				BITFIELD(8, 8)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_OVERRIDE_ENABLE_SHIFT				(1 << 19)
+#define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
 #define OMAP4430_OVERRIDE_ENABLE_MASK				BITFIELD(19, 19)
 
 /* Used by CM_CLKSEL_ABE */
-#define OMAP4430_PAD_CLKS_GATE_SHIFT				(1 << 8)
+#define OMAP4430_PAD_CLKS_GATE_SHIFT				8
 #define OMAP4430_PAD_CLKS_GATE_MASK				BITFIELD(8, 8)
 
 /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
-#define OMAP4430_PERF_CURRENT_SHIFT				(1 << 0)
+#define OMAP4430_PERF_CURRENT_SHIFT				0
 #define OMAP4430_PERF_CURRENT_MASK				BITFIELD(0, 7)
 
 /*
@@ -1315,66 +1315,66 @@
  * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
  * CM_IVA_DVFS_PERF_TESLA
  */
-#define OMAP4430_PERF_REQ_SHIFT					(1 << 0)
+#define OMAP4430_PERF_REQ_SHIFT					0
 #define OMAP4430_PERF_REQ_MASK					BITFIELD(0, 7)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT				(1 << 0)
+#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT				0
 #define OMAP4430_PER_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT			8
 #define OMAP4430_PER_DPLL_EMU_MULT_MASK				BITFIELD(8, 18)
 
 /* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE1_COMPLETED_SHIFT				(1 << 0)
+#define OMAP4430_PHASE1_COMPLETED_SHIFT				0
 #define OMAP4430_PHASE1_COMPLETED_MASK				BITFIELD(0, 0)
 
 /* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2A_COMPLETED_SHIFT			(1 << 1)
+#define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
 #define OMAP4430_PHASE2A_COMPLETED_MASK				BITFIELD(1, 1)
 
 /* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2B_COMPLETED_SHIFT			(1 << 2)
+#define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
 #define OMAP4430_PHASE2B_COMPLETED_MASK				BITFIELD(2, 2)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				(1 << 20)
+#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
 #define OMAP4430_PMD_STM_MUX_CTRL_MASK				BITFIELD(20, 21)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			(1 << 22)
+#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
 #define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			BITFIELD(22, 23)
 
 /* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP4430_PRESCAL_SHIFT					(1 << 0)
+#define OMAP4430_PRESCAL_SHIFT					0
 #define OMAP4430_PRESCAL_MASK					BITFIELD(0, 5)
 
 /* Used by REVISION_CM2, REVISION_CM1 */
-#define OMAP4430_REV_SHIFT					(1 << 0)
+#define OMAP4430_REV_SHIFT					0
 #define OMAP4430_REV_MASK					BITFIELD(0, 7)
 
 /*
  * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
  * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
  */
-#define OMAP4430_SAR_MODE_SHIFT					(1 << 4)
+#define OMAP4430_SAR_MODE_SHIFT					4
 #define OMAP4430_SAR_MODE_MASK					BITFIELD(4, 4)
 
 /* Used by CM_SCALE_FCLK */
-#define OMAP4430_SCALE_FCLK_SHIFT				(1 << 0)
+#define OMAP4430_SCALE_FCLK_SHIFT				0
 #define OMAP4430_SCALE_FCLK_MASK				BITFIELD(0, 0)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_SDMA_DYNDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_DYNDEP_SHIFT				11
 #define OMAP4430_SDMA_DYNDEP_MASK				BITFIELD(11, 11)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_SDMA_STATDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_STATDEP_SHIFT				11
 #define OMAP4430_SDMA_STATDEP_MASK				BITFIELD(11, 11)
 
 /* Used by CM_CLKSEL_ABE */
-#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				(1 << 10)
+#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
 #define OMAP4430_SLIMBUS_CLK_GATE_MASK				BITFIELD(10, 10)
 
 /*
@@ -1390,7 +1390,7 @@
  * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
  * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL
  */
-#define OMAP4430_STBYST_SHIFT					(1 << 18)
+#define OMAP4430_STBYST_SHIFT					18
 #define OMAP4430_STBYST_MASK					BITFIELD(18, 18)
 
 /*
@@ -1398,11 +1398,11 @@
  * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
  * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU
  */
-#define OMAP4430_ST_DPLL_CLK_SHIFT				(1 << 0)
+#define OMAP4430_ST_DPLL_CLK_SHIFT				0
 #define OMAP4430_ST_DPLL_CLK_MASK				BITFIELD(0, 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
 #define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				BITFIELD(9, 9)
 
 /*
@@ -1410,58 +1410,58 @@
  * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
  * CM_DIV_M2_DPLL_MPU
  */
-#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
 #define OMAP4430_ST_DPLL_CLKOUT_MASK				BITFIELD(9, 9)
 
 /*
  * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
  * CM_DIV_M3_DPLL_CORE
  */
-#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
 #define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				BITFIELD(9, 9)
 
 /* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
-#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				(1 << 11)
+#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
 #define OMAP4430_ST_DPLL_CLKOUTX2_MASK				BITFIELD(11, 11)
 
 /*
  * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
  * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
  */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			BITFIELD(9, 9)
 
 /*
  * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
  * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
  */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			BITFIELD(9, 9)
 
 /*
  * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
  * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
  */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			BITFIELD(9, 9)
 
 /*
  * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
  * CM_DIV_M7_DPLL_CORE
  */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			BITFIELD(9, 9)
 
 /* Used by CM_SYS_CLKSEL */
-#define OMAP4430_SYS_CLKSEL_SHIFT				(1 << 0)
+#define OMAP4430_SYS_CLKSEL_SHIFT				0
 #define OMAP4430_SYS_CLKSEL_MASK				BITFIELD(0, 2)
 
 /* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_TESLA_DYNDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_DYNDEP_SHIFT				1
 #define OMAP4430_TESLA_DYNDEP_MASK				BITFIELD(1, 1)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_TESLA_STATDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_STATDEP_SHIFT				1
 #define OMAP4430_TESLA_STATDEP_MASK				BITFIELD(1, 1)
 
 /*
@@ -1469,6 +1469,6 @@
  * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
  * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
-#define OMAP4430_WINDOWSIZE_SHIFT				(1 << 24)
+#define OMAP4430_WINDOWSIZE_SHIFT				24
 #define OMAP4430_WINDOWSIZE_MASK				BITFIELD(24, 27)
 #endif
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
index 58e4a1c..2d83565 100644
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
@@ -27,9 +27,6 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME		20000
-
 static const u8 cm_idlest_offs[] = {
 	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
 };
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 90a4086..a02ca30 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -67,7 +67,8 @@
 #define CM_CLKSEL					0x0040
 #define CM_CLKSEL1					CM_CLKSEL
 #define CM_CLKSEL2					0x0044
-#define CM_CLKSTCTRL					0x0048
+#define OMAP2_CM_CLKSTCTRL				0x0048
+#define OMAP4_CM_CLKSTCTRL				0x0000
 
 
 /* Architecture-specific registers */
@@ -88,7 +89,7 @@
 #define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
 #define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3				CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
 #define OMAP3430_CM_CLKSTST				0x004c
 #define OMAP3430ES2_CM_CLKSEL4				0x004c
 #define OMAP3430ES2_CM_CLKSEL5				0x0050
@@ -111,7 +112,7 @@ extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
 extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
 				      u8 idlest_shift);
-extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
 
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
@@ -133,10 +134,23 @@ static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 
 /* CM_ICLKEN_GFX */
 #define OMAP_EN_GFX_SHIFT				0
-#define OMAP_EN_GFX					(1 << 0)
+#define OMAP_EN_GFX_MASK				(1 << 0)
 
 /* CM_IDLEST_GFX */
-#define OMAP_ST_GFX					(1 << 0)
+#define OMAP_ST_GFX_MASK				(1 << 0)
 
 
+/* CM_IDLEST indicator */
+#define OMAP24XX_CM_IDLEST_VAL		0
+#define OMAP34XX_CM_IDLEST_VAL		1
+
+/*
+ * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
+ * PRCM to request that a module exit the inactive state in the case of
+ * OMAP2 & 3.
+ * In the case of OMAP4 this is the max duration in microseconds for the
+ * module to reach the functionnal state from an inactive state.
+ */
+#define MAX_MODULE_READY_TIME		2000
+
 #endif
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index c575b9b..336d948 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx CM1 & CM2 instance offset macros
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -25,334 +25,557 @@
 
 /* CM1 */
 
-
 /* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4_REVISION_CM1_OFFSET			0x0000
 #define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
 
 /* CM1.CKGEN_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
 #define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
 #define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
 #define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
 #define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
+#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
 #define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
 #define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
 #define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
 #define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
 #define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
 #define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
 #define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
 #define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
 #define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
 #define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
 #define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
 #define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
 #define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
 #define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
 #define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
+#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
 #define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
+#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
 #define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
+#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
 #define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
 #define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
 #define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
+#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
 #define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
 #define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
+#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
 #define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
+#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
 #define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
+#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
 #define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
 #define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
+#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
 #define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
+#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
 #define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
+#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
+#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
 #define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
+#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
 #define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
+#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
 #define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
+#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
 #define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
+#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
 #define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
+#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
 #define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
+#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
 #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
+#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
 #define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
+#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
 #define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
 
 /* CM1.MPU_CM1 register offsets */
+#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
+#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
+#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
+#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
 
 /* CM1.TESLA_CM1 register offsets */
+#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
+#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
+#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
+#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
 
 /* CM1.ABE_CM1 register offsets */
+#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
+#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
+#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
+#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
+#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
+#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
+#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
+#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
+#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
+#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
+#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
+#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
 #define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
+#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
+#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
+#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
 
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
-
 /* CM2 */
 
-
 /* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4_REVISION_CM2_OFFSET			0x0000
 #define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
 
 /* CM2.CKGEN_CM2 register offsets */
+#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
 #define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
 #define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
 #define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
 #define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
 #define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
+#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
 #define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
+#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
 #define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
+#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
 #define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
 #define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
 #define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
 #define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
 #define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
 #define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
 #define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
 #define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
 #define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
 #define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
 #define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
+#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
 #define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
+#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
 #define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
+#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
 #define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
 #define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET		0x0070
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
 #define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
+#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
 #define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
+#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
 #define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
 #define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
 #define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
+#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
 #define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
+#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
 #define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
+#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
 #define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
 #define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
 #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
 
 /* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
+#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
+#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
 
 /* CM2.CORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
+#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
+#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
+#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
 #define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
+#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
 #define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
+#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
 #define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
+#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
 #define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
+#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
 #define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
+#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
 #define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
+#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
 #define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
+#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
 #define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
+#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
 #define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
+#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
 #define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
+#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
 #define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
+#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
 #define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
+#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
 #define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
 #define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
+#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
 #define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
+#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
 #define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
+#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
 #define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
+#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
 #define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
+#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
 #define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
+#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
 #define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
+#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
 #define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
+#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
 #define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
+#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
 #define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
+#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
 #define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
+#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
 #define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
+#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
+#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
 #define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
+#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
 #define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
 #define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
+#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
 #define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
+#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
 #define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
+#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
 #define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
+#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
 #define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
+#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
 #define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
 #define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
 #define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
 #define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
 
 /* CM2.IVAHD_CM2 register offsets */
+#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
+#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
+#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
+#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
+#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
 
 /* CM2.CAM_CM2 register offsets */
+#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
+#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
+#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
+#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
+#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
 
 /* CM2.DSS_CM2 register offsets */
+#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
+#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
+#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
+#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
+#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
 
 /* CM2.GFX_CM2 register offsets */
+#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
+#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
+#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
+#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
 
 /* CM2.L3INIT_CM2 register offsets */
+#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
 #define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
+#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
 #define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
+#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
+#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
+#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
+#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
+#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
+#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
+#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
+#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
+#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
+#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
 #define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
+#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
 #define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
+#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
 #define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
+#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
 #define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
+#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
 #define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
+#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
 #define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
+#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
 #define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
 
 /* CM2.L4PER_CM2 register offsets */
+#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
+#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
+#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
+#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
+#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
+#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
+#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
+#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
+#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
+#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
 #define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
+#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
+#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
 #define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
+#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
 #define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
+#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
 #define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
+#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
 #define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
+#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
 #define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
+#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
 #define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
+#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
 #define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
+#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
 #define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
+#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
 #define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
+#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
 #define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
+#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
 #define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
+#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
 #define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
+#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
 #define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
+#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
 #define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
+#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
 #define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
+#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
 #define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
+#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
 #define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
+#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
 #define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
+#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
 #define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
+#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
 #define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
+#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
 #define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
+#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
 #define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
+#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
 #define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
+#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
 #define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
+#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
 #define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
+#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
 #define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
+#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
 #define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
+#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
 #define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
+#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
 #define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
+#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
 #define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
+#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
 #define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
+#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
 #define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
+#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
 #define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
+#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
 #define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
+#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
 #define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
 
 /* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
 #define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
+#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
-
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
 #endif
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index 4af76bb..b101091 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -21,35 +21,41 @@
 
 #include <asm/atomic.h>
 
-#include "cm.h"
-
-/* XXX move this to cm.h */
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME			20000
+#include <plat/common.h>
 
-/*
- * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
- * CM_CLKCTRL register.
- */
-#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
-
-/*
- * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
- * the PRCM module offset address (from the CM module base) in bits 15-0.
- */
-#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
-#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+#include "cm.h"
+#include "cm-regbits-44xx.h"
 
 /**
- * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset (XXX example)
- * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @clkctrl_reg: CLKCTRL module address
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ *
+ * Module idle state:
+ *   0x0 func:     Module is fully functional, including OCP
+ *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
+ *                 abortion
+ *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
+ *                 using separate functional clock
+ *   0x3 disabled: Module is disabled and cannot be accessed
  *
- * XXX document
+ * TODO: Need to handle module accessible in idle state
  */
-int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
 {
-	/* FIXME: Add clock manager related code */
-	return 0;
+	int i = 0;
+
+	if (!clkctrl_reg)
+		return 0;
+
+	omap_test_timeout(((__raw_readl(clkctrl_reg) &
+			    OMAP4430_IDLEST_MASK) == 0),
+			  MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
 
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index cdd1f35..a8d20ee 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -140,7 +140,11 @@ static struct omap3_control_regs control_context;
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	omap2_ctrl_base = omap2_globals->ctrl;
+	/* Static mapping, never released */
+	if (omap2_globals->ctrl) {
+		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
+		WARN_ON(!omap2_ctrl_base);
+	}
 }
 
 void __iomem *omap_ctrl_base_get(void)
@@ -190,11 +194,12 @@ void omap3_clear_scratchpad_contents(void)
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
-		OMAP3430_GLOBAL_COLD_RST) {
+	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
 			__raw_writel(0x0, (v_addr + offset));
-		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
-			OMAP3_PRM_RSTST_OFFSET);
+		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+				     OMAP3430_GR_MOD,
+				     OMAP3_PRM_RSTST_OFFSET);
 	}
 }
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 12f0cbf..3d3d035 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -45,6 +45,8 @@
 #define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
 #define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
 
+#define OMAP3_STATE_MAX OMAP3_STATE_C7
+
 struct omap3_processor_cx {
 	u8 valid;
 	u8 type;
@@ -60,6 +62,30 @@ struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
 struct powerdomain *mpu_pd, *core_pd;
 
+/*
+ * The latencies/thresholds for various C states have
+ * to be configured from the respective board files.
+ * These are some default values (which might not provide
+ * the best power savings) used on boards which do not
+ * pass these details from the board file.
+ */
+static struct cpuidle_params cpuidle_params_table[] = {
+	/* C1 */
+	{1, 2, 2, 5},
+	/* C2 */
+	{1, 10, 10, 30},
+	/* C3 */
+	{1, 50, 50, 300},
+	/* C4 */
+	{1, 1500, 1800, 4000},
+	/* C5 */
+	{1, 2500, 7500, 12000},
+	/* C6 */
+	{1, 3000, 8500, 15000},
+	/* C7 */
+	{1, 10000, 30000, 300000},
+};
+
 static int omap3_idle_bm_check(void)
 {
 	if (!omap3_can_sleep())
@@ -104,13 +130,6 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	local_irq_disable();
 	local_fiq_disable();
 
-	if (!enable_off_mode) {
-		if (mpu_state < PWRDM_POWER_RET)
-			mpu_state = PWRDM_POWER_RET;
-		if (core_state < PWRDM_POWER_RET)
-			core_state = PWRDM_POWER_RET;
-	}
-
 	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
 	pwrdm_set_next_pwrst(core_pd, core_state);
 
@@ -141,6 +160,67 @@ return_sleep_time:
 }
 
 /**
+ * next_valid_state - Find next valid c-state
+ * @dev: cpuidle device
+ * @state: Currently selected c-state
+ *
+ * If the current state is valid, it is returned back to the caller.
+ * Else, this function searches for a lower c-state which is still
+ * valid (as defined in omap3_power_states[]).
+ */
+static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
+						struct cpuidle_state *curr)
+{
+	struct cpuidle_state *next = NULL;
+	struct omap3_processor_cx *cx;
+
+	cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
+
+	/* Check if current state is valid */
+	if (cx->valid) {
+		return curr;
+	} else {
+		u8 idx = OMAP3_STATE_MAX;
+
+		/*
+		 * Reach the current state starting at highest C-state
+		 */
+		for (; idx >= OMAP3_STATE_C1; idx--) {
+			if (&dev->states[idx] == curr) {
+				next = &dev->states[idx];
+				break;
+			}
+		}
+
+		/*
+		 * Should never hit this condition.
+		 */
+		WARN_ON(next == NULL);
+
+		/*
+		 * Drop to next valid state.
+		 * Start search from the next (lower) state.
+		 */
+		idx--;
+		for (; idx >= OMAP3_STATE_C1; idx--) {
+			struct omap3_processor_cx *cx;
+
+			cx = cpuidle_get_statedata(&dev->states[idx]);
+			if (cx->valid) {
+				next = &dev->states[idx];
+				break;
+			}
+		}
+		/*
+		 * C1 and C2 are always valid.
+		 * So, no need to check for 'next==NULL' outside this loop.
+		 */
+	}
+
+	return next;
+}
+
+/**
  * omap3_enter_idle_bm - Checks for any bus activity
  * @dev: cpuidle device
  * @state: The target state to be programmed
@@ -152,7 +232,7 @@ return_sleep_time:
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
-	struct cpuidle_state *new_state = state;
+	struct cpuidle_state *new_state = next_valid_state(dev, state);
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
@@ -165,6 +245,50 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
+/**
+ * omap3_cpuidle_update_states - Update the cpuidle states.
+ *
+ * Currently, this function toggles the validity of idle states based upon
+ * the flag 'enable_off_mode'. When the flag is set all states are valid.
+ * Else, states leading to OFF state set to be invalid.
+ */
+void omap3_cpuidle_update_states(void)
+{
+	int i;
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		struct omap3_processor_cx *cx = &omap3_power_states[i];
+
+		if (enable_off_mode) {
+			cx->valid = 1;
+		} else {
+			if ((cx->mpu_state == PWRDM_POWER_OFF) ||
+				(cx->core_state	== PWRDM_POWER_OFF))
+				cx->valid = 0;
+		}
+	}
+}
+
+void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+	int i;
+
+	if (!cpuidle_board_params)
+		return;
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		cpuidle_params_table[i].valid =
+			cpuidle_board_params[i].valid;
+		cpuidle_params_table[i].sleep_latency =
+			cpuidle_board_params[i].sleep_latency;
+		cpuidle_params_table[i].wake_latency =
+			cpuidle_board_params[i].wake_latency;
+		cpuidle_params_table[i].threshold =
+			cpuidle_board_params[i].threshold;
+	}
+	return;
+}
+
 /* omap3_init_power_states - Initialises the OMAP3 specific C states.
  *
  * Below is the desciption of each C state.
@@ -179,75 +303,103 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 void omap_init_power_states(void)
 {
 	/* C1 . MPU WFI + Core active */
-	omap3_power_states[OMAP3_STATE_C1].valid = 1;
+	omap3_power_states[OMAP3_STATE_C1].valid =
+			cpuidle_params_table[OMAP3_STATE_C1].valid;
 	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
-	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
-	omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
-	omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C1].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C1].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C1].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C1].wake_latency;
+	omap3_power_states[OMAP3_STATE_C1].threshold =
+			cpuidle_params_table[OMAP3_STATE_C1].threshold;
 	omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
 
 	/* C2 . MPU WFI + Core inactive */
-	omap3_power_states[OMAP3_STATE_C2].valid = 1;
+	omap3_power_states[OMAP3_STATE_C2].valid =
+			cpuidle_params_table[OMAP3_STATE_C2].valid;
 	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
-	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
-	omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
-	omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+	omap3_power_states[OMAP3_STATE_C2].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C2].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C2].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C2].wake_latency;
+	omap3_power_states[OMAP3_STATE_C2].threshold =
+			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
 
 	/* C3 . MPU CSWR + Core inactive */
-	omap3_power_states[OMAP3_STATE_C3].valid = 1;
+	omap3_power_states[OMAP3_STATE_C3].valid =
+			cpuidle_params_table[OMAP3_STATE_C3].valid;
 	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
-	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
-	omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
-	omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+	omap3_power_states[OMAP3_STATE_C3].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C3].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C3].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C3].wake_latency;
+	omap3_power_states[OMAP3_STATE_C3].threshold =
+			cpuidle_params_table[OMAP3_STATE_C3].threshold;
 	omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C4 . MPU OFF + Core inactive */
-	omap3_power_states[OMAP3_STATE_C4].valid = 1;
+	omap3_power_states[OMAP3_STATE_C4].valid =
+			cpuidle_params_table[OMAP3_STATE_C4].valid;
 	omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
-	omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
-	omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
-	omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+	omap3_power_states[OMAP3_STATE_C4].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C4].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C4].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C4].wake_latency;
+	omap3_power_states[OMAP3_STATE_C4].threshold =
+			cpuidle_params_table[OMAP3_STATE_C4].threshold;
 	omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C5 . MPU CSWR + Core CSWR*/
-	omap3_power_states[OMAP3_STATE_C5].valid = 1;
+	omap3_power_states[OMAP3_STATE_C5].valid =
+			cpuidle_params_table[OMAP3_STATE_C5].valid;
 	omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
-	omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
-	omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
-	omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+	omap3_power_states[OMAP3_STATE_C5].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C5].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C5].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C5].wake_latency;
+	omap3_power_states[OMAP3_STATE_C5].threshold =
+			cpuidle_params_table[OMAP3_STATE_C5].threshold;
 	omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C6 . MPU OFF + Core CSWR */
-	omap3_power_states[OMAP3_STATE_C6].valid = 1;
+	omap3_power_states[OMAP3_STATE_C6].valid =
+			cpuidle_params_table[OMAP3_STATE_C6].valid;
 	omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
-	omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
-	omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
-	omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+	omap3_power_states[OMAP3_STATE_C6].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C6].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C6].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C6].wake_latency;
+	omap3_power_states[OMAP3_STATE_C6].threshold =
+			cpuidle_params_table[OMAP3_STATE_C6].threshold;
 	omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C7 . MPU OFF + Core OFF */
-	omap3_power_states[OMAP3_STATE_C7].valid = 1;
+	omap3_power_states[OMAP3_STATE_C7].valid =
+			cpuidle_params_table[OMAP3_STATE_C7].valid;
 	omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
-	omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
-	omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
-	omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+	omap3_power_states[OMAP3_STATE_C7].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C7].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C7].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C7].wake_latency;
+	omap3_power_states[OMAP3_STATE_C7].threshold =
+			cpuidle_params_table[OMAP3_STATE_C7].threshold;
 	omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
@@ -302,6 +454,8 @@ int __init omap3_idle_init(void)
 		return -EINVAL;
 	dev->state_count = count;
 
+	omap3_cpuidle_update_states();
+
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
 		       __func__);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 18ad931..03e6c9e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -17,8 +17,10 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 
 #include <plat/control.h>
 #include <plat/tc.h>
@@ -26,6 +28,7 @@
 #include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
+#include <plat/dma.h>
 
 #include "mux.h"
 
@@ -141,7 +144,7 @@ static inline void omap_init_camera(void)
 #define MBOX_REG_SIZE   0x120
 
 #ifdef CONFIG_ARCH_OMAP2
-static struct resource omap_mbox_resources[] = {
+static struct resource omap2_mbox_resources[] = {
 	{
 		.start		= OMAP24XX_MAILBOX_BASE,
 		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -156,10 +159,14 @@ static struct resource omap_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
+#else
+#define omap2_mbox_resources		NULL
+#define omap2_mbox_resources_sz		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static struct resource omap_mbox_resources[] = {
+static struct resource omap3_mbox_resources[] = {
 	{
 		.start		= OMAP34XX_MAILBOX_BASE,
 		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -170,12 +177,16 @@ static struct resource omap_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
+#else
+#define omap3_mbox_resources		NULL
+#define omap3_mbox_resources_sz		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 
 #define OMAP4_MBOX_REG_SIZE	0x130
-static struct resource omap_mbox_resources[] = {
+static struct resource omap4_mbox_resources[] = {
 	{
 		.start          = OMAP44XX_MAILBOX_BASE,
 		.end            = OMAP44XX_MAILBOX_BASE +
@@ -183,10 +194,14 @@ static struct resource omap_mbox_resources[] = {
 		.flags          = IORESOURCE_MEM,
 	},
 	{
-		.start          = INT_44XX_MAIL_U0_MPU,
+		.start          = OMAP44XX_IRQ_MAIL_U0,
 		.flags          = IORESOURCE_IRQ,
 	},
 };
+static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
+#else
+#define omap4_mbox_resources		NULL
+#define omap4_mbox_resources_sz		0
 #endif
 
 static struct platform_device mbox_device = {
@@ -196,9 +211,15 @@ static struct platform_device mbox_device = {
 
 static inline void omap_init_mbox(void)
 {
-	if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
-		mbox_device.resource = omap_mbox_resources;
+	if (cpu_is_omap24xx()) {
+		mbox_device.resource = omap2_mbox_resources;
+		mbox_device.num_resources = omap2_mbox_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		mbox_device.resource = omap3_mbox_resources;
+		mbox_device.num_resources = omap3_mbox_resources_sz;
+	} else if (cpu_is_omap44xx()) {
+		mbox_device.resource = omap4_mbox_resources;
+		mbox_device.num_resources = omap4_mbox_resources_sz;
 	} else {
 		pr_err("%s: platform not supported\n", __func__);
 		return;
@@ -435,8 +456,41 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
 
-#ifdef CONFIG_OMAP_SHA1_MD5
-static struct resource sha1_md5_resources[] = {
+static struct resource omap2_pmu_resource = {
+	.start	= 3,
+	.end	= 3,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct resource omap3_pmu_resource = {
+	.start	= INT_34XX_BENCH_MPU_EMUL,
+	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device omap_pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+};
+
+static void omap_init_pmu(void)
+{
+	if (cpu_is_omap24xx())
+		omap_pmu_device.resource = &omap2_pmu_resource;
+	else if (cpu_is_omap34xx())
+		omap_pmu_device.resource = &omap3_pmu_resource;
+	else
+		return;
+
+	platform_device_register(&omap_pmu_device);
+}
+
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_sham_resources[] = {
 	{
 		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
 		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
@@ -447,20 +501,55 @@ static struct resource sha1_md5_resources[] = {
 		.flags	= IORESOURCE_IRQ,
 	}
 };
+static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
+#else
+#define omap2_sham_resources		NULL
+#define omap2_sham_resources_sz		0
+#endif
 
-static struct platform_device sha1_md5_device = {
-	.name		= "OMAP SHA1/MD5",
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_sham_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_34XX_SHA1MD52_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= OMAP34XX_DMA_SHA1MD5_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
+#else
+#define omap3_sham_resources		NULL
+#define omap3_sham_resources_sz		0
+#endif
+
+static struct platform_device sham_device = {
+	.name		= "omap-sham",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sha1_md5_resources),
-	.resource	= sha1_md5_resources,
 };
 
-static void omap_init_sha1_md5(void)
+static void omap_init_sham(void)
 {
-	platform_device_register(&sha1_md5_device);
+	if (cpu_is_omap24xx()) {
+		sham_device.resource = omap2_sham_resources;
+		sham_device.num_resources = omap2_sham_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		sham_device.resource = omap3_sham_resources;
+		sham_device.num_resources = omap3_sham_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&sham_device);
 }
 #else
-static inline void omap_init_sha1_md5(void) { }
+static inline void omap_init_sham(void) { }
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -492,7 +581,12 @@ static struct platform_device dummy_pdev = {
  **/
 static void __init omap_hsmmc_reset(void)
 {
-	u32 i, nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
+	u32 i, nr_controllers;
+
+	if (cpu_is_omap242x())
+		return;
+
+	nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
 		(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
 
 	for (i = 0; i < nr_controllers; i++) {
@@ -568,6 +662,15 @@ static inline void omap_hsmmc_reset(void) {}
 static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+
 	if (cpu_is_omap2420() && controller_nr == 0) {
 		omap_cfg_reg(H18_24XX_MMC_CMD);
 		omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -697,13 +800,13 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			if (!cpu_is_omap44xx())
 				return;
 			base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
-			irq = INT_44XX_MMC4_IRQ;
+			irq = OMAP44XX_IRQ_MMC4;
 			break;
 		case 4:
 			if (!cpu_is_omap44xx())
 				return;
 			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
-			irq = INT_44XX_MMC5_IRQ;
+			irq = OMAP44XX_IRQ_MMC5;
 			break;
 		default:
 			continue;
@@ -715,7 +818,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		} else if (cpu_is_omap44xx()) {
 			if (i < 3) {
 				base += OMAP4_MMC_REG_OFFSET;
-				irq += IRQ_GIC_START;
+				irq += OMAP44XX_IRQ_GIC_START;
 			}
 			size = OMAP4_HSMMC_SIZE;
 			name = "mmci-omap-hs";
@@ -763,6 +866,33 @@ static inline void omap_hdq_init(void)
 static inline void omap_hdq_init(void) {}
 #endif
 
+/*---------------------------------------------------------------------------*/
+
+#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
+	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
+};
+#else
+static struct resource omap_vout_resource[2] = {
+};
+#endif
+
+static struct platform_device omap_vout_device = {
+	.name		= "omap_vout",
+	.num_resources	= ARRAY_SIZE(omap_vout_resource),
+	.resource 	= &omap_vout_resource[0],
+	.id		= -1,
+};
+static void omap_init_vout(void)
+{
+	if (platform_device_register(&omap_vout_device) < 0)
+		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+}
+#else
+static inline void omap_init_vout(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -774,9 +904,11 @@ static int __init omap2_init_devices(void)
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
+	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();
-	omap_init_sha1_md5();
+	omap_init_sham();
+	omap_init_vout();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
deleted file mode 100644
index f6055b4..0000000
--- a/arch/arm/mach-omap2/dpll.c
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
-
-#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-
-	dd = clk->dpll_data;
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = clk->dpll_data->clk_ref->rate / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
-	u8 ai;
-	int r;
-
-	pr_debug("clock: locking DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
-	int r;
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk *clk)
-{
-	int r;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-	/*
-	 *FIXME: this is dubious - if clk->rate has changed, what about
-	 * propagating?
-	 */
-	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop.  This function is
- * intended for use in struct clkops.  No return value.
- */
-void omap3_noncore_dpll_disable(struct clk *clk)
-{
-	_omap3_noncore_dpll_stop(clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/* Set jitter correction */
-	if (!cpu_is_omap44xx()) {
-		v = __raw_readl(dd->control_reg);
-		v &= ~dd->freqsel_mask;
-		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
-	}
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *new_parent = NULL;
-	u16 freqsel = 0;
-	struct dpll_data *dd;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (rate == omap2_get_dpll_rate(clk))
-		return 0;
-
-	/*
-	 * Ensure both the bypass and ref clocks are enabled prior to
-	 * doing anything; we need the bypass clock running to reprogram
-	 * the DPLL.
-	 */
-	omap2_clk_enable(dd->clk_bypass);
-	omap2_clk_enable(dd->clk_ref);
-
-	if (dd->clk_bypass->rate == rate &&
-	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
-		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-	} else {
-		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
-
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
-
-		/* No freqsel on OMAP4 */
-		if (!cpu_is_omap44xx()) {
-			freqsel = _omap3_dpll_compute_freqsel(clk,
-						dd->last_rounded_n);
-			if (!freqsel)
-				WARN_ON(1);
-		}
-
-		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
-
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-	}
-	if (!ret) {
-		/*
-		 * Switch the parent clock in the heirarchy, and make sure
-		 * that the new parent's usecount is correct.  Note: we
-		 * enable the new parent before disabling the old to avoid
-		 * any unnecessary hardware disable->enable transitions.
-		 */
-		if (clk->usecount) {
-			omap2_clk_enable(new_parent);
-			omap2_clk_disable(clk->parent);
-		}
-		clk_reparent(clk, new_parent);
-		clk->rate = rate;
-	}
-	omap2_clk_disable(dd->clk_ref);
-	omap2_clk_disable(dd->clk_bypass);
-
-	return 0;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-void omap3_dpll_allow_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-void omap3_dpll_deny_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk *pclk;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
-	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
-
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
-		rate = clk->parent->rate;
-	else
-		rate = clk->parent->rate * 2;
-	return rate;
-}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
new file mode 100644
index 0000000..b32ccd9
--- /dev/null
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -0,0 +1,599 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <asm/clkdev.h>
+
+#include "clock.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+
+	dd = clk->dpll_data;
+
+	state <<= __ffs(dd->idlest_mask);
+
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->dpll_data->clk_ref->rate / n;
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	omap3_dpll_deny_idle(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * lookup_dco_sddiv -  Set j-type DPLL4 compensation variables
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
+			     u8 n)
+{
+	unsigned long fint, clkinp, sd; /* watch out for overflow */
+	int mod1, mod2;
+
+	clkinp = clk->parent->rate;
+	fint = (clkinp / n) * m;
+
+	if (fint < 1000000000)
+		*dco = 2;
+	else
+		*dco = 4;
+	/*
+	 * target sigma-delta to near 250MHz
+	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+	 */
+	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+	mod1 = (clkinp * m) % (250 * n);
+	sd = (clkinp * m) / (250 * n);
+	mod2 = sd % 10;
+	sd /= 10;
+
+	if (mod1 || mod2)
+		sd++;
+	*sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/*
+	 * Set jitter correction. No jitter correction for OMAP4 and 3630
+	 * since freqsel field is no longer present
+	 */
+	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		v = __raw_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		__raw_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+
+	/*
+	 * XXX This code is not needed for 3430/AM35XX; can it be optimized
+	 * out in non-multi-OMAP builds for those chips?
+	 */
+	if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
+		u8 dco, sd_div;
+		lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
+		/* XXX This probably will need revision for OMAP4 */
+		v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
+			| OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+		v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
+		v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+	}
+
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk *clk)
+{
+	return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
+		r = _omap3_noncore_dpll_bypass(clk);
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
+		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/*
+	 *FIXME: this is dubious - if clk->rate has changed, what about
+	 * propagating?
+	 */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop.  This function is
+ * intended for use in struct clkops.  No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	_omap3_noncore_dpll_stop(clk);
+}
+
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *new_parent = NULL;
+	u16 freqsel = 0;
+	struct dpll_data *dd;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		/* No freqsel on OMAP4 and OMAP3630 */
+		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+			freqsel = _omap3_dpll_compute_freqsel(clk,
+						dd->last_rounded_n);
+			if (!freqsel)
+				WARN_ON(1);
+		}
+
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
+
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
+
+	return 0;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+
+}
+
+/* Clock control for DPLL outputs */
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+		rate = clk->parent->rate;
+	else
+		rate = clk->parent->rate * 2;
+	return rate;
+}
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index ec0d984..9c442e2 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -56,6 +56,9 @@ static struct amba_device omap3_etm_device = {
 
 static int __init emu_init(void)
 {
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
 	amba_device_register(&omap3_etb_device, &iomem_resource);
 	amba_device_register(&omap3_etm_device, &iomem_resource);
 
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
new file mode 100644
index 0000000..e57fb29
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -0,0 +1,142 @@
+/*
+ * gpmc-nand.c
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <plat/nand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+
+#define WR_RD_PIN_MONITORING	0x00600000
+
+static struct omap_nand_platform_data *gpmc_nand_data;
+
+static struct resource gpmc_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gpmc_nand_device = {
+	.name		= "omap2-nand",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &gpmc_nand_resource,
+};
+
+static int omap2_nand_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	int err;
+
+	if (!gpmc_nand_data->gpmc_t)
+		return 0;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
+	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
+	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->adv_rd_off);
+	t.oe_on  = t.adv_on;
+	t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
+	t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
+	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
+	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+
+	/* Write */
+	t.adv_wr_off = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->adv_wr_off);
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->wr_data_mux_bus);
+	    t.wr_access = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->wr_access);
+	}
+	t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
+	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
+	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+
+	/* Configure GPMC */
+	gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
+			GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
+			GPMC_CONFIG1_DEVICETYPE_NAND);
+
+	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int gpmc_nand_setup(void)
+{
+	struct device *dev = &gpmc_nand_device.dev;
+
+	/* Set timings in GPMC */
+	if (omap2_nand_gpmc_retime() < 0) {
+		dev_err(dev, "Unable to set gpmc timings\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+{
+	unsigned int val;
+	int err	= 0;
+	struct device *dev = &gpmc_nand_device.dev;
+
+	gpmc_nand_data = _nand_data;
+	gpmc_nand_data->nand_setup = gpmc_nand_setup;
+	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
+
+	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
+				&gpmc_nand_data->phys_base);
+	if (err < 0) {
+		dev_err(dev, "Cannot request GPMC CS\n");
+		return err;
+	}
+
+	err = gpmc_nand_setup();
+	if (err < 0) {
+		dev_err(dev, "NAND platform setup failed: %d\n", err);
+		return err;
+	}
+
+	/* Enable RD PIN Monitoring Reg */
+	if (gpmc_nand_data->dev_ready) {
+		val  = gpmc_cs_read_reg(gpmc_nand_data->cs,
+						 GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(gpmc_nand_data->cs,
+						GPMC_CS_CONFIG1, val);
+	}
+
+	err = platform_device_register(&gpmc_nand_device);
+	if (err < 0) {
+		dev_err(dev, "Unable to register NAND device\n");
+		goto out_free_cs;
+	}
+
+	return 0;
+
+out_free_cs:
+	gpmc_cs_free(gpmc_nand_data->cs);
+
+	return err;
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 3f1334f..5bc3ca0 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@@ -549,9 +552,10 @@ void __init gpmc_init(void)
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_gpmc_regs gpmc_context;
 
-void omap3_gpmc_save_context()
+void omap3_gpmc_save_context(void)
 {
 	int i;
+
 	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
 	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
 	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
@@ -580,9 +584,10 @@ void omap3_gpmc_save_context()
 	}
 }
 
-void omap3_gpmc_restore_context()
+void omap3_gpmc_restore_context(void)
 {
 	int i;
+
 	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
 	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
 	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
new file mode 100644
index 0000000..1ef54b0
--- /dev/null
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -0,0 +1,360 @@
+/*
+ * linux/arch/arm/mach-omap2/hsmmc.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/omap-pm.h>
+
+#include "hsmmc.h"
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+static u16 control_mmc1;
+
+#define HSMMC_NAME_LEN	9
+
+static struct hsmmc_controller {
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+
+static int hsmmc_get_context_loss(struct device *dev)
+{
+	return omap_pm_get_dev_context_loss_count(dev);
+}
+
+#else
+#define hsmmc_get_context_loss NULL
+#endif
+
+static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	u32 reg, prog_io;
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->slots[0].remux)
+		mmc->slots[0].remux(dev, slot, power_on);
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	if (power_on) {
+		if (cpu_is_omap2430()) {
+			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+			if ((1 << vdd) >= MMC_VDD_30_31)
+				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			else
+				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+		}
+
+		if (mmc->slots[0].internal_clock) {
+			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+		}
+
+		reg = omap_ctrl_readl(control_pbias_offset);
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
+				 int power_on, int vdd)
+{
+	u32 reg;
+
+	/* 100ms delay required for PBIAS configuration */
+	msleep(100);
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP2_PBIASLITEVMODE0;
+		else
+			reg |= OMAP2_PBIASLITEVMODE0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+			OMAP2_PBIASLITEVMODE0);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	u32 reg;
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	reg = omap_ctrl_readl(control_pbias_offset);
+	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+					OMAP4_USBC1_ICUSB_PWRDNZ);
+	omap_ctrl_writel(reg, control_pbias_offset);
+}
+
+static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
+				 int power_on, int vdd)
+{
+	u32 reg;
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
+		else
+			reg |= OMAP4_MMC1_PBIASLITE_VMODE;
+		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+						OMAP4_USBC1_ICUSB_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+		/* 4 microsec delay for comparator to generate an error*/
+		udelay(4);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) {
+			pr_err("Pbias Voltage is not same as LDO\n");
+			/* Caution : On VMODE_ERROR Power Down MMC IO */
+			reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ);
+			omap_ctrl_writel(reg, control_pbias_offset);
+		}
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		 reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
+			OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ |
+			OMAP4_USBC1_ICUSB_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void hsmmc23_before_set_reg(struct device *dev, int slot,
+				   int power_on, int vdd)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->slots[0].remux)
+		mmc->slots[0].remux(dev, slot, power_on);
+
+	if (power_on) {
+		/* Only MMC2 supports a CLKIN */
+		if (mmc->slots[0].internal_clock) {
+			u32 reg;
+
+			reg = omap_ctrl_readl(control_devconf1_offset);
+			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+			omap_ctrl_writel(reg, control_devconf1_offset);
+		}
+	}
+}
+
+static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
+							int vdd)
+{
+	return 0;
+}
+
+static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
+
+void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+	int i;
+	u32 reg;
+
+	if (!cpu_is_omap44xx()) {
+		if (cpu_is_omap2430()) {
+			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+		} else {
+			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+		}
+	} else {
+		control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
+		control_mmc1 = OMAP44XX_CONTROL_MMC1;
+		reg = omap_ctrl_readl(control_mmc1);
+		reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
+		reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
+		reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
+		omap_ctrl_writel(reg, control_mmc1);
+	}
+
+	for (c = controllers; c->mmc; c++) {
+		struct hsmmc_controller *hc = hsmmc + c->mmc - 1;
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc) {
+			pr_debug("MMC%d: no such controller\n", c->mmc);
+			continue;
+		}
+		if (mmc) {
+			pr_debug("MMC%d: already configured\n", c->mmc);
+			continue;
+		}
+
+		mmc = kzalloc(sizeof(struct omap_mmc_platform_data),
+			      GFP_KERNEL);
+		if (!mmc) {
+			pr_err("Cannot allocate memory for mmc device!\n");
+			goto done;
+		}
+
+		if (c->name)
+			strncpy(hc->name, c->name, HSMMC_NAME_LEN);
+		else
+			snprintf(hc->name, ARRAY_SIZE(hc->name),
+				"mmc%islot%i", c->mmc, 1);
+		mmc->slots[0].name = hc->name;
+		mmc->nr_slots = 1;
+		mmc->slots[0].wires = c->wires;
+		mmc->slots[0].internal_clock = !c->ext_clock;
+		mmc->dma_mask = 0xffffffff;
+
+		mmc->get_context_loss_count = hsmmc_get_context_loss;
+
+		mmc->slots[0].switch_pin = c->gpio_cd;
+		mmc->slots[0].gpio_wp = c->gpio_wp;
+
+		mmc->slots[0].remux = c->remux;
+
+		if (c->cover_only)
+			mmc->slots[0].cover = 1;
+
+		if (c->nonremovable)
+			mmc->slots[0].nonremovable = 1;
+
+		if (c->power_saving)
+			mmc->slots[0].power_saving = 1;
+
+		if (c->no_off)
+			mmc->slots[0].no_off = 1;
+
+		if (c->vcc_aux_disable_is_sleep)
+			mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
+		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
+
+		if (cpu_is_omap3517() || cpu_is_omap3505())
+			mmc->slots[0].set_power = nop_mmc_set_power;
+		else
+			mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+
+		switch (c->mmc) {
+		case 1:
+			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+				/* on-chip level shifting via PBIAS0/PBIAS1 */
+				if (cpu_is_omap44xx()) {
+					mmc->slots[0].before_set_reg =
+						omap4_hsmmc1_before_set_reg;
+					mmc->slots[0].after_set_reg =
+						omap4_hsmmc1_after_set_reg;
+				} else {
+					mmc->slots[0].before_set_reg =
+						omap_hsmmc1_before_set_reg;
+					mmc->slots[0].after_set_reg =
+						omap_hsmmc1_after_set_reg;
+				}
+			}
+
+			/* Omap3630 HSMMC1 supports only 4-bit */
+			if (cpu_is_omap3630() && c->wires > 4) {
+				c->wires = 4;
+				mmc->slots[0].wires = c->wires;
+			}
+			break;
+		case 2:
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
+		case 3:
+			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+				/* off-chip level shifting, or none */
+				mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+				mmc->slots[0].after_set_reg = NULL;
+			}
+			break;
+		default:
+			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
+			continue;
+		}
+		hsmmc_data[c->mmc - 1] = mmc;
+	}
+
+	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+	/* pass the device nodes back to board setup code */
+	for (c = controllers; c->mmc; c++) {
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc)
+			continue;
+		c->dev = mmc->dev;
+	}
+
+done:
+	for (i = 0; i < nr_hsmmc; i++)
+		kfree(hsmmc_data[i]);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
new file mode 100644
index 0000000..36f0ba8
--- /dev/null
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -0,0 +1,38 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct omap2_hsmmc_info {
+	u8	mmc;		/* controller 1/2/3 */
+	u8	wires;		/* 1/4/8 wires */
+	bool	transceiver;	/* MMC-2 option */
+	bool	ext_clock;	/* use external pin for input clock */
+	bool	cover_only;	/* No card detect - just cover switch */
+	bool	nonremovable;	/* Nonremovable e.g. eMMC */
+	bool	power_saving;	/* Try to sleep or power off when possible */
+	bool	no_off;		/* power_saving and power is not to go off */
+	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+	int	gpio_cd;	/* or -EINVAL */
+	int	gpio_wp;	/* or -EINVAL */
+	char	*name;		/* or NULL for default */
+	struct device *dev;	/* returned: pointer to mmc adapter */
+	int	ocr_mask;	/* temporary HACK */
+	/* Remux (pad configuation) when powering on/off */
+	void (*remux)(struct device *dev, int slot, int power_on);
+};
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+
+#else
+
+static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 789ca8c..7951ae1 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -25,9 +25,7 @@
 
 #include "mux.h"
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap2_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap24xx()) {
 		const int omap24xx_pins[][2] = {
@@ -51,6 +49,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
 		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 3d65c50..37b8a1a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -57,6 +57,8 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	} else if (cpu_is_omap44xx()) {
+		val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS);
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -175,6 +177,8 @@ void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, SGX);
 	OMAP3_CHECK_FEATURE(status, NEON);
 	OMAP3_CHECK_FEATURE(status, ISP);
+	if (cpu_is_omap3630())
+		omap3_features |= OMAP3_HAS_192MHZ_CLK;
 
 	/*
 	 * TODO: Get additional info (where applicable)
@@ -281,6 +285,7 @@ void __init omap4_check_revision(void)
 
 	if ((hawkeye == 0xb852) && (rev == 0x0)) {
 		omap_revision = OMAP4430_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP4430ES1;
 		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
 		return;
 	}
@@ -358,6 +363,7 @@ void __init omap3_cpuinfo(void)
 	OMAP3_SHOW_FEATURE(sgx);
 	OMAP3_SHOW_FEATURE(neon);
 	OMAP3_SHOW_FEATURE(isp);
+	OMAP3_SHOW_FEATURE(192mhz_clk);
 
 	printk(")\n");
 }
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h
new file mode 100644
index 0000000..f1e13d1
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/am35xx.h
@@ -0,0 +1,44 @@
+/*:
+ * Address mappings and base address for AM35XX specific interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ *	   Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AM35XX_H
+#define __ASM_ARCH_AM35XX_H
+
+/*
+ * Base addresses
+ *	Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
+ */
+#define AM35XX_IPSS_EMAC_BASE		0x5C000000
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+#define AM35XX_IPSS_HECC_BASE		0x5C050000
+#define AM35XX_IPSS_VPFE_BASE		0x5C060000
+
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
+#define AM35XX_HECC_RAM_OFFSET		(0x3000)
+#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
+#define AM35XX_HECC_INT_LINE		(0x0)
+#define AM35XX_HECC_VERSION		(0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
+#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
+						AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
+
+#endif  /*  __ASM_ARCH_AM35XX_H */
diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-sdp.h
new file mode 100644
index 0000000..465169c
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-sdp.h
@@ -0,0 +1,21 @@
+/*
+ *  board-sdp.h
+ *
+ *  Information structures for SDP-specific board config data
+ *
+ *  Copyright (C) 2009 Nokia Corporation
+ *  Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct flash_partitions {
+	struct mtd_partition *parts;
+	int nr_parts;
+};
+
+extern void sdp_flash_init(struct flash_partitions []);
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255d..35b2440 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,32 +11,108 @@
  *
 */
 
-		.macro	addruart,rx
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+
+#include <plat/serial.h>
+
+#define UART_OFFSET(addr)	((addr) & 0x00ffffff)
+
+		.pushsection .data
+omap_uart_phys:	.word	0
+omap_uart_virt:	.word	0
+omap_uart_lsr:	.word	0
+		.popsection
+
+		/*
+		 * Note that this code won't work if the bootloader passes
+		 * a wrong machine ID number in r1. To debug, just hardcode
+		 * the desired UART phys and virt addresses temporarily into
+		 * the omap_uart_phys and omap_uart_virt above.
+		 */
+		.macro	addruart, rx, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+10:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldrne	\rx, =omap_uart_virt	@ virtual base address
+		ldr	\rx, [\rx, #0]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
+		/* Check the debug UART configuration set in uncompress.h */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-#ifdef  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xfa000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xfa000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00fb0000	@ UART 3
-		add	\rx, \rx, #0x00006000
-#endif
-#endif
+		ldreq	\rx, =OMAP_UART_INFO
+		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
+		ldr	\rx, [\rx, #0]
+
+		/* Select the UART to use based on the UART1 scratchpad value */
+		cmp	\rx, #0			@ no port configured?
+		beq	21f			@ if none, try to use UART1
+		cmp	\rx, #OMAP2UART1	@ OMAP2/3/4UART1
+		beq	21f			@ configure OMAP2/3/4UART1
+		cmp	\rx, #OMAP2UART2	@ OMAP2/3/4UART2
+		beq	22f			@ configure OMAP2/3/4UART2
+		cmp	\rx, #OMAP2UART3	@ only on 24xx
+		beq	23f			@ configure OMAP2UART3
+		cmp	\rx, #OMAP3UART3	@ only on 34xx
+		beq	33f			@ configure OMAP3UART3
+		cmp	\rx, #OMAP4UART3	@ only on 44xx
+		beq	43f			@ configure OMAP4UART3
+		cmp	\rx, #OMAP3UART4	@ only on 36xx
+		beq	34f			@ configure OMAP3UART4
+		cmp	\rx, #OMAP4UART4	@ only on 44xx
+		beq	44f			@ configure OMAP4UART4
+		cmp	\rx, #ZOOM_UART		@ only on zoom2/3
+		beq	95f			@ configure ZOOM_UART
+
+		/* Configure the UART offset from the phys/virt base */
+21:		mov	\rx, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+		b	98f
+22:		mov	\rx, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+		b	98f
+23:		mov	\rx, #UART_OFFSET(OMAP2_UART3_BASE)
+		b	98f
+33:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rx, \rx, #0x00fb0000
+		add	\rx, \rx, #0x00006000		@ OMAP3_UART3_BASE
+		b	98f
+34:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rx, \rx, #0x00fb0000
+		add	\rx, \rx, #0x00028000		@ OMAP3_UART4_BASE
+		b	98f
+43:		mov	\rx, #UART_OFFSET(OMAP4_UART3_BASE)
+		b	98f
+44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
+		b	98f
+95:		ldr	\rx, =ZOOM_UART_BASE
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		ldr	\rx, =ZOOM_UART_VIRT
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
+		ldr	\tmp, =omap_uart_lsr
+		str	\rx, [\tmp, #0]
+		b	10b
+
+		/* Store both phys and virt address for the uart */
+98:		add	\rx, \rx, #0x48000000	@ phys base
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		sub	\rx, \rx, #0x48000000	@ phys base
+		add	\rx, \rx, #0xfa000000	@ virt base
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
+		ldr	\tmp, =omap_uart_lsr
+		str	\rx, [\tmp, #0]
+
+		b	10b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
@@ -44,15 +120,12 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+1001:		ldr	\rd, =omap_uart_lsr
+		ldr	\rd, [\rd, #0]
+		ldrb	\rd, [\rx, \rd]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
-1002:
 		.endm
 
 		.macro	waituart,rd,rx
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index c7f1720..50fd749 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -17,46 +17,134 @@
 
 #include <plat/omap24xx.h>
 #include <plat/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
 #include <plat/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
+
+#include <plat/multi.h>
+
+#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP4_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
+#define	ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
+		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
-		.macro  arch_ret_to_user, tmp1, tmp2
+/*
+ * Unoptimized irq functions for multi-omap2, 3 and 4
+ */
+
+#ifdef MULTI_OMAP2
+		.pushsection .data
+omap_irq_base:	.word	0
+		.popsection
+
+		/* Configure the interrupt base on the first interrupt */
+		.macro  get_irqnr_preamble, base, tmp
+9:
+		ldr	\base, =omap_irq_base	@ irq base address
+		ldr	\base, [\base, #0]	@ irq base value
+		cmp	\base, #0		@ already configured?
+		bne	9997f			@ nothing to do
+
+		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
+		and	\tmp, \tmp, #0x000f0000	@ only check architecture
+		cmp	\tmp, #0x00070000	@ is v6?
+		beq	2400f			@ found v6 so it's omap24xx
+		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
+		and	\tmp, \tmp, #0x000000f0	@ check cortex 8 or 9
+		cmp	\tmp, #0x00000080	@ cortex A-8?
+		beq	3400f			@ found A-8 so it's omap34xx
+		cmp	\tmp, #0x00000090	@ cortex A-9?
+		beq	4400f			@ found A-9 so it's omap44xx
+2400:		ldr	\base, =OMAP2_IRQ_BASE
+		ldr	\tmp, =omap_irq_base
+		str	\base, [\tmp, #0]
+		b	9b
+3400:		ldr	\base, =OMAP3_IRQ_BASE
+		ldr	\tmp, =omap_irq_base
+		str	\base, [\tmp, #0]
+		b	9b
+4400:		ldr	\base, =OMAP4_IRQ_BASE
+		ldr	\tmp, =omap_irq_base
+		str	\base, [\tmp, #0]
+		b	9b
+9997:
 		.endm
 
-#ifndef CONFIG_ARCH_OMAP4
+		/* Check the pending interrupts. Note that base already set */
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
+		tst	\base, #0x100		@ gic address?
+		bne	4401f			@ found gic
+
+		/* Handle omap2 and omap3 */
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
 		cmp	\irqnr, #0x0
-		bne	2222f
+		bne	9998f
 		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
 		cmp	\irqnr, #0x0
-		bne	2222f
+		bne	9998f
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
-2222:
+9998:
 		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+		b	9999f
 
+		/* Handle omap4 */
+4401:		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+		ldr     \tmp, =1021
+		bic     \irqnr, \irqstat, #0x1c00
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+9999:
 		.endm
+
+
+#else	/* MULTI_OMAP2 */
+
+
+/*
+ * Optimized irq functions for omap2, 3 and 4
+ */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+		.macro  get_irqnr_preamble, base, tmp
+#ifdef CONFIG_ARCH_OMAP2
+		ldr	\base, =OMAP2_IRQ_BASE
 #else
-#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+		ldr	\base, =OMAP3_IRQ_BASE
+#endif
+		.endm
+
+		/* Check the pending interrupts. Note that base already set */
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	9999f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	9999f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+9999:
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+
+		.endm
+#endif
+
+
+#ifdef CONFIG_ARCH_OMAP4
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr     \base, =OMAP4_IRQ_BASE
+		.endm
 
 		/*
 		 * The interrupt numbering scheme is defined in the
@@ -78,7 +166,6 @@
 		 * valid range for an IRQ (30-1020 inclusive).
 		 */
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
 		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
 
 		ldr     \tmp, =1021
@@ -119,6 +206,7 @@
 		cmp	\tmp, #0
 		.endm
 #endif
+#endif	/* MULTI_OMAP2 */
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
new file mode 100644
index 0000000..423af3a
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -0,0 +1,26 @@
+/*
+ * omap4-common.h: OMAP4 specific common header file
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP4_COMMON_H
+#define OMAP_ARCH_OMAP4_COMMON_H
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_cpu_base_addr;
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5a79964..3cfb425 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,7 +35,9 @@
 #include <plat/serial.h>
 #include <plat/vram.h>
 
-#include "clock.h"
+#include "clock2xxx.h"
+#include "clock3xxx.h"
+#include "clock44xx.h"
 
 #include <plat/omap-pm.h>
 #include <plat/powerdomain.h>
@@ -44,16 +46,13 @@
 #include <plat/clockdomain.h>
 #include "clockdomains.h"
 #include <plat/omap_hwmod.h>
-#include "omap_hwmod_2420.h"
-#include "omap_hwmod_2430.h"
-#include "omap_hwmod_34xx.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,
@@ -123,7 +122,7 @@ static struct map_desc omap243x_io_desc[] __initdata = {
 #endif
 #endif
 
-#ifdef	CONFIG_ARCH_OMAP34XX
+#ifdef	CONFIG_ARCH_OMAP3
 static struct map_desc omap34xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_34XX_VIRT,
@@ -138,12 +137,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= L4_WK_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_WK_34XX_PHYS),
-		.length		= L4_WK_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
 		.virtual	= OMAP34XX_GPMC_VIRT,
 		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
 		.length		= OMAP34XX_GPMC_SIZE,
@@ -173,6 +166,15 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 		.length		= L4_EMU_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
+#if defined(CONFIG_DEBUG_LL) &&							\
+	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
+	{
+		.virtual	= ZOOM_UART_VIRT,
+		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+#endif
 };
 #endif
 #ifdef	CONFIG_ARCH_OMAP4
@@ -190,12 +192,6 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	},
 	{
-		.virtual	= L4_WK_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_WK_44XX_PHYS),
-		.length		= L4_WK_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
 		.virtual	= OMAP44XX_GPMC_VIRT,
 		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
 		.length		= OMAP44XX_GPMC_SIZE,
@@ -234,37 +230,54 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-void __init omap2_map_common_io(void)
+static void __init _omap2_map_common_io(void)
+{
+	/* Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	omap2_check_revision();
+	omap_sram_init();
+	omapfb_reserve_sdram();
+	omap_vram_reserve_sdram();
+}
+
+#ifdef CONFIG_ARCH_OMAP2420
+void __init omap242x_map_common_io(void)
 {
-#if defined(CONFIG_ARCH_OMAP2420)
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+	_omap2_map_common_io();
+}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_ARCH_OMAP2430
+void __init omap243x_map_common_io(void)
+{
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+	_omap2_map_common_io();
+}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#ifdef CONFIG_ARCH_OMAP3
+void __init omap34xx_map_common_io(void)
+{
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+	_omap2_map_common_io();
+}
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP4
+void __init omap44xx_map_common_io(void)
+{
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
-#endif
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	omap2_check_revision();
-	omap_sram_init();
-	omapfb_reserve_sdram();
-	omap_vram_reserve_sdram();
+	_omap2_map_common_io();
 }
+#endif
 
 /*
  * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
@@ -303,30 +316,36 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
-	struct omap_hwmod **hwmods = NULL;
+	pwrdm_init(powerdomains_omap);
+	clkdm_init(clockdomains_omap, clkdm_autodeps);
+	if (cpu_is_omap242x())
+		omap2420_hwmod_init();
+	else if (cpu_is_omap243x())
+		omap2430_hwmod_init();
+	else if (cpu_is_omap34xx())
+		omap3xxx_hwmod_init();
+	omap2_mux_init();
+	/* The OPP tables have to be registered before a clk init */
+	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
 	if (cpu_is_omap2420())
-		hwmods = omap2420_hwmods;
+		omap2420_clk_init();
 	else if (cpu_is_omap2430())
-		hwmods = omap2430_hwmods;
+		omap2430_clk_init();
 	else if (cpu_is_omap34xx())
-		hwmods = omap34xx_hwmods;
+		omap3xxx_clk_init();
+	else if (cpu_is_omap44xx())
+		omap4xxx_clk_init();
+	else
+		pr_err("Could not init clock framework - unknown CPU\n");
 
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
-	/* The OPP tables have to be registered before a clk init */
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
-	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
-	pwrdm_init(powerdomains_omap);
-	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
-#endif
-	omap2_clk_init();
 	omap_serial_early_init();
-#ifndef CONFIG_ARCH_OMAP4
-	omap_hwmod_late_init();
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
+		omap_hwmod_late_init();
 	omap_pm_if_init();
-	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
-	_omap2_init_reprogram_sdrc();
-#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
+		_omap2_init_reprogram_sdrc();
+	}
 	gpmc_init();
 }
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 6f4b7cc..e82da68 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/stringify.h>
 
 #include <plat/iommu.h>
@@ -146,6 +147,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 	printk("\n");
 
 	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	omap2_iommu_disable(obj);
 	return stat;
 }
 
@@ -183,7 +185,7 @@ static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
 	if (!cr)
 		return ERR_PTR(-ENOMEM);
 
-	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
 	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
 
 	return cr;
@@ -211,7 +213,8 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
 	char *p = buf;
 
 	/* FIXME: Need more detail analysis of cam/ram */
-	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+	p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
+					(cr->cam & MMU_CAM_P) ? 1 : 0);
 
 	return p - buf;
 }
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 2705402..26aeef5 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base;
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
 		else if (cpu_is_omap34xx())
 			base = OMAP34XX_IC_BASE;
 
+		BUG_ON(!base);
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 281ab63..318f363 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -40,6 +40,9 @@
 #define AUTOIDLE	(1 << 0)
 #define SOFTRESET	(1 << 1)
 #define SMARTIDLE	(2 << 3)
+#define OMAP4_SOFTRESET	(1 << 0)
+#define OMAP4_NOIDLE	(1 << 2)
+#define OMAP4_SMARTIDLE	(2 << 2)
 
 /* SYSSTATUS: register bit definition */
 #define RESETDONE	(1 << 0)
@@ -93,29 +96,47 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk(KERN_ERR "Could not get mailboxes_ick: %d\n",
+		printk(KERN_ERR "Could not get mailboxes_ick: %ld\n",
 			PTR_ERR(mbox_ick_handle));
 		return PTR_ERR(mbox_ick_handle);
 	}
 	clk_enable(mbox_ick_handle);
 
-	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
-	timeout = jiffies + msecs_to_jiffies(20);
-	do {
-		l = mbox_read_reg(MAILBOX_SYSSTATUS);
-		if (l & RESETDONE)
-			break;
-	} while (!time_after(jiffies, timeout));
-
-	if (!(l & RESETDONE)) {
-		pr_err("Can't take mmu out of reset\n");
-		return -ENODEV;
+	if (cpu_is_omap44xx()) {
+		mbox_write_reg(OMAP4_SOFTRESET, MAILBOX_SYSCONFIG);
+		timeout = jiffies + msecs_to_jiffies(20);
+		do {
+			l = mbox_read_reg(MAILBOX_SYSCONFIG);
+			if (!(l & OMAP4_SOFTRESET))
+				break;
+		} while (!time_after(jiffies, timeout));
+
+		if (l & OMAP4_SOFTRESET) {
+			pr_err("Can't take mailbox out of reset\n");
+			return -ENODEV;
+		}
+	} else {
+		mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+		timeout = jiffies + msecs_to_jiffies(20);
+		do {
+			l = mbox_read_reg(MAILBOX_SYSSTATUS);
+			if (l & RESETDONE)
+				break;
+		} while (!time_after(jiffies, timeout));
+
+		if (!(l & RESETDONE)) {
+			pr_err("Can't take mailbox out of reset\n");
+			return -ENODEV;
+		}
 	}
 
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	l = SMARTIDLE | AUTOIDLE;
+	if (cpu_is_omap44xx())
+		l = OMAP4_SMARTIDLE;
+	else
+		l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
@@ -409,19 +430,19 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		if (unlikely(!res)) {
 			dev_err(&pdev->dev, "invalid irq resource\n");
 			ret = -ENODEV;
-			goto err_iva1;
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
 		}
 		mbox_iva_info.irq = res->start;
 		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret)
-			goto err_iva1;
+		if (ret) {
+			omap_mbox_unregister(&mbox_dsp_info);
+			goto err_dsp;
+		}
 	}
 #endif
 	return 0;
 
-err_iva1:
-	omap_mbox_unregister(&mbox_dsp_info);
-
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index baa4517..c293370 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
@@ -65,9 +66,11 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
+#define OMAP2420_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap2420_mcbsp_pdata		NULL
 #define OMAP2420_MCBSP_PDATA_SZ		0
+#define OMAP2420_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
@@ -114,12 +117,14 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
+#define OMAP2430_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap2430_mcbsp_pdata		NULL
 #define OMAP2430_MCBSP_PDATA_SZ		0
+#define OMAP2430_MCBSP_REG_NUM		0
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP34XX_MCBSP1_BASE,
@@ -132,6 +137,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
+		.phys_base_st	= OMAP34XX_MCBSP2_ST_BASE,
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
@@ -141,6 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
+		.phys_base_st	= OMAP34XX_MCBSP3_ST_BASE,
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
@@ -168,9 +175,11 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#define OMAP34XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap34xx_mcbsp_pdata		NULL
 #define OMAP34XX_MCBSP_PDATA_SZ		0
+#define OMAP34XX_MCBSP_REG_NUM		0
 #endif
 
 static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
@@ -178,47 +187,49 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
 		.phys_base      = OMAP44XX_MCBSP1_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
-		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP1,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP2_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
-		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP2,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP3_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
-		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP3,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP4_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
-		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP4,
 		.ops            = &omap2_mcbsp_ops,
 	},
 };
 #define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+#define OMAP44XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 
 static int __init omap2_mcbsp_init(void)
 {
-	if (cpu_is_omap2420())
+	if (cpu_is_omap2420()) {
 		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
-	if (cpu_is_omap2430())
+		omap_mcbsp_cache_size = OMAP2420_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap2430()) {
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
-	if (cpu_is_omap34xx())
+		omap_mcbsp_cache_size = OMAP2430_MCBSP_REG_NUM * sizeof(u32);
+	} else if (cpu_is_omap34xx()) {
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap44xx())
+		omap_mcbsp_cache_size = OMAP34XX_MCBSP_REG_NUM * sizeof(u32);
+	} else if (cpu_is_omap44xx()) {
 		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
+		omap_mcbsp_cache_size = OMAP44XX_MCBSP_REG_NUM * sizeof(u32);
+	}
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
deleted file mode 100644
index 0c3c72d..0000000
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/mmc-twl4030.c
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/hardware.h>
-#include <plat/control.h>
-#include <plat/mmc.h>
-#include <plat/board.h>
-
-#include "mmc-twl4030.h"
-
-
-#if defined(CONFIG_REGULATOR) && \
-	(defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-
-static u16 control_pbias_offset;
-static u16 control_devconf1_offset;
-
-#define HSMMC_NAME_LEN	9
-
-static struct twl_mmc_controller {
-	struct omap_mmc_platform_data	*mmc;
-	/* Vcc == configured supply
-	 * Vcc_alt == optional
-	 *   -	MMC1, supply for DAT4..DAT7
-	 *   -	MMC2/MMC2, external level shifter voltage supply, for
-	 *	chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
-	 */
-	struct regulator		*vcc;
-	struct regulator		*vcc_aux;
-	char				name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC];
-
-static int twl_mmc_card_detect(int irq)
-{
-	unsigned i;
-
-	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
-		struct omap_mmc_platform_data *mmc;
-
-		mmc = hsmmc[i].mmc;
-		if (!mmc)
-			continue;
-		if (irq != mmc->slots[0].card_detect_irq)
-			continue;
-
-		/* NOTE: assumes card detect signal is active-low */
-		return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
-	}
-	return -ENOSYS;
-}
-
-static int twl_mmc_get_ro(struct device *dev, int slot)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	/* NOTE: assumes write protect signal is active-high */
-	return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
-}
-
-static int twl_mmc_get_cover_state(struct device *dev, int slot)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	/* NOTE: assumes card detect signal is active-low */
-	return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
-}
-
-/*
- * MMC Slot Initialization.
- */
-static int twl_mmc_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-	int ret = 0;
-	int i;
-
-	/* MMC/SD/SDIO doesn't require a card detect switch */
-	if (gpio_is_valid(mmc->slots[0].switch_pin)) {
-		ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
-		if (ret)
-			goto done;
-		ret = gpio_direction_input(mmc->slots[0].switch_pin);
-		if (ret)
-			goto err;
-	}
-
-	/* require at least main regulator */
-	for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
-		if (hsmmc[i].name == mmc->slots[0].name) {
-			struct regulator *reg;
-
-			hsmmc[i].mmc = mmc;
-
-			reg = regulator_get(dev, "vmmc");
-			if (IS_ERR(reg)) {
-				dev_dbg(dev, "vmmc regulator missing\n");
-				/* HACK: until fixed.c regulator is usable,
-				 * we don't require a main regulator
-				 * for MMC2 or MMC3
-				 */
-				if (i != 0)
-					break;
-				ret = PTR_ERR(reg);
-				hsmmc[i].vcc = NULL;
-				goto err;
-			}
-			hsmmc[i].vcc = reg;
-			mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
-
-			/* allow an aux regulator */
-			reg = regulator_get(dev, "vmmc_aux");
-			hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
-
-			/* UGLY HACK:  workaround regulator framework bugs.
-			 * When the bootloader leaves a supply active, it's
-			 * initialized with zero usecount ... and we can't
-			 * disable it without first enabling it.  Until the
-			 * framework is fixed, we need a workaround like this
-			 * (which is safe for MMC, but not in general).
-			 */
-			if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
-				regulator_enable(hsmmc[i].vcc);
-				regulator_disable(hsmmc[i].vcc);
-			}
-			if (hsmmc[i].vcc_aux) {
-				if (regulator_is_enabled(reg) > 0) {
-					regulator_enable(reg);
-					regulator_disable(reg);
-				}
-			}
-
-			break;
-		}
-	}
-
-	return 0;
-
-err:
-	gpio_free(mmc->slots[0].switch_pin);
-done:
-	mmc->slots[0].card_detect_irq = 0;
-	mmc->slots[0].card_detect = NULL;
-
-	dev_err(dev, "err %d configuring card detect\n", ret);
-	return ret;
-}
-
-static void twl_mmc_cleanup(struct device *dev)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-	int i;
-
-	gpio_free(mmc->slots[0].switch_pin);
-	for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
-		regulator_put(hsmmc[i].vcc);
-		regulator_put(hsmmc[i].vcc_aux);
-	}
-}
-
-#ifdef CONFIG_PM
-
-static int twl_mmc_suspend(struct device *dev, int slot)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	disable_irq(mmc->slots[0].card_detect_irq);
-	return 0;
-}
-
-static int twl_mmc_resume(struct device *dev, int slot)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	enable_irq(mmc->slots[0].card_detect_irq);
-	return 0;
-}
-
-#else
-#define twl_mmc_suspend	NULL
-#define twl_mmc_resume	NULL
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int twl4030_mmc_get_context_loss(struct device *dev)
-{
-	/* FIXME: PM DPS not implemented yet */
-	return 0;
-}
-
-#else
-#define twl4030_mmc_get_context_loss NULL
-#endif
-
-static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	u32 reg, prog_io;
-	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[0];
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	/*
-	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
-	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
-	 */
-	if (power_on) {
-		if (cpu_is_omap2430()) {
-			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
-			if ((1 << vdd) >= MMC_VDD_30_31)
-				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			else
-				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
-		}
-
-		if (mmc->slots[0].internal_clock) {
-			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
-			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
-		}
-
-		reg = omap_ctrl_readl(control_pbias_offset);
-		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52Mhz */
-			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
-			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
-			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
-		} else {
-			reg |= OMAP2_PBIASSPEEDCTRL0;
-		}
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-
-		ret = mmc_regulator_set_ocr(c->vcc, vdd);
-
-		/* 100ms delay required for PBIAS configuration */
-		msleep(100);
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
-		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP2_PBIASLITEVMODE0;
-		else
-			reg |= OMAP2_PBIASLITEVMODE0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-
-		ret = mmc_regulator_set_ocr(c->vcc, 0);
-
-		/* 100ms delay required for PBIAS configuration */
-		msleep(100);
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
-			OMAP2_PBIASLITEVMODE0);
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-
-	return ret;
-}
-
-static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
-{
-	int ret = 0;
-	struct twl_mmc_controller *c = NULL;
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-	int i;
-
-	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
-		if (mmc == hsmmc[i].mmc) {
-			c = &hsmmc[i];
-			break;
-		}
-	}
-
-	if (c == NULL)
-		return -ENODEV;
-
-	/* If we don't see a Vcc regulator, assume it's a fixed
-	 * voltage always-on regulator.
-	 */
-	if (!c->vcc)
-		return 0;
-
-	/*
-	 * Assume Vcc regulator is used only to power the card ... OMAP
-	 * VDDS is used to power the pins, optionally with a transceiver to
-	 * support cards using voltages other than VDDS (1.8V nominal).  When a
-	 * transceiver is used, DAT3..7 are muxed as transceiver control pins.
-	 *
-	 * In some cases this regulator won't support enable/disable;
-	 * e.g. it's a fixed rail for a WLAN chip.
-	 *
-	 * In other cases vcc_aux switches interface power.  Example, for
-	 * eMMC cards it represents VccQ.  Sometimes transceivers or SDIO
-	 * chips/cards need an interface voltage rail too.
-	 */
-	if (power_on) {
-		/* only MMC2 supports a CLKIN */
-		if (mmc->slots[0].internal_clock) {
-			u32 reg;
-
-			reg = omap_ctrl_readl(control_devconf1_offset);
-			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-			omap_ctrl_writel(reg, control_devconf1_offset);
-		}
-		ret = mmc_regulator_set_ocr(c->vcc, vdd);
-		/* enable interface voltage rail, if needed */
-		if (ret == 0 && c->vcc_aux) {
-			ret = regulator_enable(c->vcc_aux);
-			if (ret < 0)
-				ret = mmc_regulator_set_ocr(c->vcc, 0);
-		}
-	} else {
-		if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
-			ret = regulator_disable(c->vcc_aux);
-		if (ret == 0)
-			ret = mmc_regulator_set_ocr(c->vcc, 0);
-	}
-
-	return ret;
-}
-
-static int twl_mmc1_set_sleep(struct device *dev, int slot, int sleep, int vdd,
-			      int cardsleep)
-{
-	struct twl_mmc_controller *c = &hsmmc[0];
-	int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
-
-	return regulator_set_mode(c->vcc, mode);
-}
-
-static int twl_mmc23_set_sleep(struct device *dev, int slot, int sleep, int vdd,
-			       int cardsleep)
-{
-	struct twl_mmc_controller *c = NULL;
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-	int i, err, mode;
-
-	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
-		if (mmc == hsmmc[i].mmc) {
-			c = &hsmmc[i];
-			break;
-		}
-	}
-
-	if (c == NULL)
-		return -ENODEV;
-
-	/*
-	 * If we don't see a Vcc regulator, assume it's a fixed
-	 * voltage always-on regulator.
-	 */
-	if (!c->vcc)
-		return 0;
-
-	mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
-
-	if (!c->vcc_aux)
-		return regulator_set_mode(c->vcc, mode);
-
-	if (cardsleep) {
-		/* VCC can be turned off if card is asleep */
-		struct regulator *vcc_aux = c->vcc_aux;
-
-		c->vcc_aux = NULL;
-		if (sleep)
-			err = twl_mmc23_set_power(dev, slot, 0, 0);
-		else
-			err = twl_mmc23_set_power(dev, slot, 1, vdd);
-		c->vcc_aux = vcc_aux;
-	} else
-		err = regulator_set_mode(c->vcc, mode);
-	if (err)
-		return err;
-	return regulator_set_mode(c->vcc_aux, mode);
-}
-
-static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
-
-void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
-{
-	struct twl4030_hsmmc_info *c;
-	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
-
-	if (cpu_is_omap2430()) {
-		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
-		nr_hsmmc = 2;
-	} else {
-		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
-	}
-
-	for (c = controllers; c->mmc; c++) {
-		struct twl_mmc_controller *twl = hsmmc + c->mmc - 1;
-		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
-
-		if (!c->mmc || c->mmc > nr_hsmmc) {
-			pr_debug("MMC%d: no such controller\n", c->mmc);
-			continue;
-		}
-		if (mmc) {
-			pr_debug("MMC%d: already configured\n", c->mmc);
-			continue;
-		}
-
-		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
-		if (!mmc) {
-			pr_err("Cannot allocate memory for mmc device!\n");
-			return;
-		}
-
-		if (c->name)
-			strncpy(twl->name, c->name, HSMMC_NAME_LEN);
-		else
-			snprintf(twl->name, ARRAY_SIZE(twl->name),
-				"mmc%islot%i", c->mmc, 1);
-		mmc->slots[0].name = twl->name;
-		mmc->nr_slots = 1;
-		mmc->slots[0].wires = c->wires;
-		mmc->slots[0].internal_clock = !c->ext_clock;
-		mmc->dma_mask = 0xffffffff;
-		mmc->init = twl_mmc_late_init;
-
-		/* note: twl4030 card detect GPIOs can disable VMMCx ... */
-		if (gpio_is_valid(c->gpio_cd)) {
-			mmc->cleanup = twl_mmc_cleanup;
-			mmc->suspend = twl_mmc_suspend;
-			mmc->resume = twl_mmc_resume;
-
-			mmc->slots[0].switch_pin = c->gpio_cd;
-			mmc->slots[0].card_detect_irq = gpio_to_irq(c->gpio_cd);
-			if (c->cover_only)
-				mmc->slots[0].get_cover_state = twl_mmc_get_cover_state;
-			else
-				mmc->slots[0].card_detect = twl_mmc_card_detect;
-		} else
-			mmc->slots[0].switch_pin = -EINVAL;
-
-		mmc->get_context_loss_count =
-				twl4030_mmc_get_context_loss;
-
-		/* write protect normally uses an OMAP gpio */
-		if (gpio_is_valid(c->gpio_wp)) {
-			gpio_request(c->gpio_wp, "mmc_wp");
-			gpio_direction_input(c->gpio_wp);
-
-			mmc->slots[0].gpio_wp = c->gpio_wp;
-			mmc->slots[0].get_ro = twl_mmc_get_ro;
-		} else
-			mmc->slots[0].gpio_wp = -EINVAL;
-
-		if (c->nonremovable)
-			mmc->slots[0].nonremovable = 1;
-
-		if (c->power_saving)
-			mmc->slots[0].power_saving = 1;
-
-		/* NOTE:  MMC slots should have a Vcc regulator set up.
-		 * This may be from a TWL4030-family chip, another
-		 * controllable regulator, or a fixed supply.
-		 *
-		 * temporary HACK: ocr_mask instead of fixed supply
-		 */
-		mmc->slots[0].ocr_mask = c->ocr_mask;
-
-		switch (c->mmc) {
-		case 1:
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->slots[0].set_power = twl_mmc1_set_power;
-			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
-
-			/* Omap3630 HSMMC1 supports only 4-bit */
-			if (cpu_is_omap3630() && c->wires > 4) {
-				c->wires = 4;
-				mmc->slots[0].wires = c->wires;
-			}
-			break;
-		case 2:
-			if (c->ext_clock)
-				c->transceiver = 1;
-			if (c->transceiver && c->wires > 4)
-				c->wires = 4;
-			/* FALLTHROUGH */
-		case 3:
-			/* off-chip level shifting, or none */
-			mmc->slots[0].set_power = twl_mmc23_set_power;
-			mmc->slots[0].set_sleep = twl_mmc23_set_sleep;
-			break;
-		default:
-			pr_err("MMC%d configuration not supported!\n", c->mmc);
-			kfree(mmc);
-			continue;
-		}
-		hsmmc_data[c->mmc - 1] = mmc;
-	}
-
-	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
-
-	/* pass the device nodes back to board setup code */
-	for (c = controllers; c->mmc; c++) {
-		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
-
-		if (!c->mmc || c->mmc > nr_hsmmc)
-			continue;
-		c->dev = mmc->dev;
-	}
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
deleted file mode 100644
index a47e685..0000000
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct twl4030_hsmmc_info {
-	u8	mmc;		/* controller 1/2/3 */
-	u8	wires;		/* 1/4/8 wires */
-	bool	transceiver;	/* MMC-2 option */
-	bool	ext_clock;	/* use external pin for input clock */
-	bool	cover_only;	/* No card detect - just cover switch */
-	bool	nonremovable;	/* Nonremovable e.g. eMMC */
-	bool	power_saving;	/* Try to sleep or power off when possible */
-	int	gpio_cd;	/* or -EINVAL */
-	int	gpio_wp;	/* or -EINVAL */
-	char	*name;		/* or NULL for default */
-	struct device *dev;	/* returned: pointer to mmc adapter */
-	int	ocr_mask;	/* temporary HACK */
-};
-
-#if defined(CONFIG_REGULATOR) && \
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-
-void twl4030_mmc_init(struct twl4030_hsmmc_info *);
-
-#else
-
-static inline void twl4030_mmc_init(struct twl4030_hsmmc_info *info)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 3f59bd1..8b3d269 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/ctype.h>
@@ -75,7 +76,7 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
 
@@ -369,7 +370,7 @@ int __init omap2_mux_init(void)
 
 /*----------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static LIST_HEAD(muxmodes);
 static DEFINE_MUTEX(muxmode_mutex);
 
@@ -486,7 +487,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
 	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[14];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
 	int i = -1;
 
 	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -553,6 +554,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 		if (!m0_name)
 			continue;
 
+		/* REVISIT: Needs to be updated if mode0 names get longer */
 		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
 			if (m0_name[i] == '\0') {
 				m0_def[i] = m0_name[i];
@@ -960,7 +962,12 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#else
 		/* Skip pins that are not muxed as GPIO by bootloader */
 		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
@@ -977,6 +984,38 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 	}
 }
 
+#ifdef CONFIG_OMAP_MUX
+
+static void omap_mux_init_package(struct omap_mux *superset,
+				  struct omap_mux *package_subset,
+				  struct omap_ball *package_balls)
+{
+	if (package_subset)
+		omap_mux_package_fixup(package_subset, superset);
+	if (package_balls)
+		omap_mux_package_init_balls(package_balls, superset);
+}
+
+static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+{
+	omap_mux_set_cmdline_signals();
+	omap_mux_write_array(board_mux);
+}
+
+#else
+
+static void omap_mux_init_package(struct omap_mux *superset,
+				  struct omap_mux *package_subset,
+				  struct omap_ball *package_balls)
+{
+}
+
+static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+{
+}
+
+#endif
+
 int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 				struct omap_mux *superset,
 				struct omap_mux *package_subset,
@@ -993,22 +1032,12 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 		return -ENODEV;
 	}
 
-#ifdef CONFIG_OMAP_MUX
-	if (package_subset)
-		omap_mux_package_fixup(package_subset, superset);
-	if (package_balls)
-		omap_mux_package_init_balls(package_balls, superset);
-#endif
-
+	omap_mux_init_package(superset, package_subset, package_balls);
 	omap_mux_init_list(superset);
-
-#ifdef CONFIG_OMAP_MUX
-	omap_mux_set_cmdline_signals();
-	omap_mux_write_array(board_mux);
-#endif
+	omap_mux_init_signals(board_mux);
 
 	return 0;
 }
 
-#endif	/* CONFIG_ARCH_OMAP34XX */
+#endif	/* CONFIG_ARCH_OMAP3 */
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index f8c2e7a..480abc5 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -102,7 +102,7 @@ struct omap_board_mux {
 	u16	value;
 };
 
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
 
 /**
  * omap_mux_init_gpio - initialize a signal based on the GPIO number
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 68e0a59..2ff4dce 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
 		"uart3_tx_irtx", NULL, NULL, NULL,
 		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
@@ -1854,26 +1901,15 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
 	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
 	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
-	_OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
 	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
 	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
 	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
 	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
 	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
 	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
-	_OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
-	_OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
-	_OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
-	_OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
-	_OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
-	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
 	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
 	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
 	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
 	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
 	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
@@ -1881,10 +1917,7 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
-	_OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
 	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
 	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
 	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
 	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
@@ -1901,8 +1934,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
 	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
 	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
-	_OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
 	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
 	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
 	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
@@ -1911,11 +1942,6 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
 	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
 	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
-	_OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
-	_OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
-	_OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
-	_OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
@@ -1963,77 +1989,12 @@ struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
 	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
 	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
-	_OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
-	_OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
-	_OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
-	_OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
-	_OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
-	_OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
-	_OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
-	_OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
-	_OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
-	_OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
-	_OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
-	_OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
-	_OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
-	_OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
-	_OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
-	_OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
 	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
 	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
-	_OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
-	_OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
-	_OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
-	_OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
-	_OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
-	_OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
-	_OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
-	_OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
-	_OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
-	_OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
-	_OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
-	_OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
-	_OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
-	_OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
-	_OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
-	_OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
-	_OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
-	_OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
-	_OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
-	_OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
-	_OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
-	_OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
-	_OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
-	_OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
-	_OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
-	_OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
-	_OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
-	_OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
-	_OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
-	_OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
-	_OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
-	_OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
-	_OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
-	_OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
-	_OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
-	_OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
-	_OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
-	_OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
-	_OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
-	_OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
-	_OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
-	_OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
-	_OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
-	_OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
-	_OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
-	_OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
-	_OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
 	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
 	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
 	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
 	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
-	_OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index aa3f65c..ef0e7a0 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -33,7 +33,7 @@
 ENTRY(omap_secondary_startup)
 hold:	ldr	r12,=0x103
 	dsb
-	smc				@ read from AuxCoreBoot0
+	smc	#0			@ read from AuxCoreBoot0
 	mov	r0, r0, lsr #9
 	mrc	p15, 0, r4, c0, c0, 5
 	and	r4, r4, #0x0f
@@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r1-r12, pc}
 END(omap_modify_auxcoreboot0)
 
@@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr)
 	stmfd   sp!, {r2-r12, lr}
 	ldr	r12, =0x105
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
new file mode 100644
index 0000000..eb9bee7
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -0,0 +1,157 @@
+/*
+ * omap iommu: omap device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <plat/iommu.h>
+#include <plat/irqs.h>
+
+struct iommu_device {
+	resource_size_t base;
+	int irq;
+	struct iommu_platform_data pdata;
+	struct resource res[2];
+};
+static struct iommu_device *devices;
+static int num_iommu_devices;
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct iommu_device omap3_devices[] = {
+	{
+		.base = 0x480bd400,
+		.irq = 24,
+		.pdata = {
+			.name = "isp",
+			.nr_tlb_entries = 8,
+			.clk_name = "cam_ick",
+		},
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.base = 0x5d000000,
+		.irq = 28,
+		.pdata = {
+			.name = "iva2",
+			.nr_tlb_entries = 32,
+			.clk_name = "iva2_ck",
+		},
+	},
+#endif
+};
+#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices)
+static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
+#else
+#define omap3_devices		NULL
+#define NR_OMAP3_IOMMU_DEVICES	0
+#define omap3_iommu_pdev	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct iommu_device omap4_devices[] = {
+	{
+		.base = OMAP4_MMU1_BASE,
+		.irq = INT_44XX_DUCATI_MMU_IRQ,
+		.pdata = {
+			.name = "ducati",
+			.nr_tlb_entries = 32,
+			.clk_name = "ducati_ick",
+		},
+	},
+#if defined(CONFIG_MPU_TESLA_IOMMU)
+	{
+		.base = OMAP4_MMU2_BASE,
+		.irq = INT_44XX_DSP_MMU,
+		.pdata = {
+			.name = "tesla",
+			.nr_tlb_entries = 32,
+			.clk_name = "tesla_ick",
+		},
+	},
+#endif
+};
+#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
+static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
+#else
+#define omap4_devices		NULL
+#define NR_OMAP4_IOMMU_DEVICES	0
+#define omap4_iommu_pdev	NULL
+#endif
+
+static struct platform_device **omap_iommu_pdev;
+
+static int __init omap_iommu_init(void)
+{
+	int i, err;
+	struct resource res[] = {
+		{ .flags = IORESOURCE_MEM },
+		{ .flags = IORESOURCE_IRQ },
+	};
+
+	if (cpu_is_omap34xx()) {
+		devices = omap3_devices;
+		omap_iommu_pdev = omap3_iommu_pdev;
+		num_iommu_devices = NR_OMAP3_IOMMU_DEVICES;
+	} else if (cpu_is_omap44xx()) {
+		devices = omap4_devices;
+		omap_iommu_pdev = omap4_iommu_pdev;
+		num_iommu_devices = NR_OMAP4_IOMMU_DEVICES;
+	} else
+		return -ENODEV;
+
+	for (i = 0; i < num_iommu_devices; i++) {
+		struct platform_device *pdev;
+		const struct iommu_device *d = &devices[i];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		res[0].start = d->base;
+		res[0].end = d->base + MMU_REG_SIZE - 1;
+		res[1].start = res[1].end = d->irq;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &d->pdata,
+					       sizeof(d->pdata));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap_iommu_pdev[i]);
+	return err;
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < num_iommu_devices; i++)
+		platform_device_unregister(omap_iommu_pdev[i]);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap device registration");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 38153e5..1cf5231 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,7 +24,7 @@
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-#include <plat/common.h>
+#include <mach/omap4-common.h>
 
 /* SCU base address */
 static void __iomem *scu_base;
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
deleted file mode 100644
index fbbcb5c..0000000
--- a/arch/arm/mach-omap2/omap3-iommu.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * omap iommu: omap3 device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <plat/iommu.h>
-
-struct iommu_device {
-	resource_size_t base;
-	int irq;
-	struct iommu_platform_data pdata;
-	struct resource res[2];
-};
-
-static struct iommu_device devices[] = {
-	{
-		.base = 0x480bd400,
-		.irq = 24,
-		.pdata = {
-			.name = "isp",
-			.nr_tlb_entries = 8,
-			.clk_name = "cam_ick",
-		},
-	},
-#if defined(CONFIG_MPU_BRIDGE_IOMMU)
-	{
-		.base = 0x5d000000,
-		.irq = 28,
-		.pdata = {
-			.name = "iva2",
-			.nr_tlb_entries = 32,
-			.clk_name = "iva2_ck",
-		},
-	},
-#endif
-};
-#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
-
-static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
-
-static int __init omap3_iommu_init(void)
-{
-	int i, err;
-	struct resource res[] = {
-		{ .flags = IORESOURCE_MEM },
-		{ .flags = IORESOURCE_IRQ },
-	};
-
-	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
-		struct platform_device *pdev;
-		const struct iommu_device *d = &devices[i];
-
-		pdev = platform_device_alloc("omap-iommu", i);
-		if (!pdev) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-
-		res[0].start = d->base;
-		res[0].end = d->base + MMU_REG_SIZE - 1;
-		res[1].start = res[1].end = d->irq;
-
-		err = platform_device_add_resources(pdev, res,
-						    ARRAY_SIZE(res));
-		if (err)
-			goto err_out;
-		err = platform_device_add_data(pdev, &d->pdata,
-					       sizeof(d->pdata));
-		if (err)
-			goto err_out;
-		err = platform_device_add(pdev);
-		if (err)
-			goto err_out;
-		omap3_iommu_pdev[i] = pdev;
-	}
-	return 0;
-
-err_out:
-	while (i--)
-		platform_device_put(omap3_iommu_pdev[i]);
-	return err;
-}
-module_init(omap3_iommu_init);
-
-static void __exit omap3_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < NR_IOMMU_DEVICES; i++)
-		platform_device_unregister(omap3_iommu_pdev[i]);
-}
-module_exit(omap3_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("omap iommu: omap3 device registration");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
new file mode 100644
index 0000000..13dc979
--- /dev/null
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -0,0 +1,72 @@
+/*
+ * OMAP4 specific common source file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+
+#ifdef CONFIG_CACHE_L2X0
+void __iomem *l2cache_base;
+#endif
+
+void __iomem *gic_cpu_base_addr;
+void __iomem *gic_dist_base_addr;
+
+
+void __init gic_init_irq(void)
+{
+	/* Static mapping, never released */
+	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+	BUG_ON(!gic_dist_base_addr);
+	gic_dist_init(0, gic_dist_base_addr, 29);
+
+	/* Static mapping, never released */
+	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base_addr);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init omap_l2_cache_init(void)
+{
+	/*
+	 * To avoid code running on other OMAPs in
+	 * multi-omap builds
+	 */
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	/* Static mapping, never released */
+	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
+	BUG_ON(!l2cache_base);
+
+	/* Enable PL310 L2 Cache controller */
+	omap_smc1(0x102, 0x1);
+
+	/*
+	 * 32KB way size, 16-way associativity,
+	 * parity disabled
+	 */
+	l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+
+	return 0;
+}
+early_initcall(omap_l2_cache_init);
+#endif
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
new file mode 100644
index 0000000..f61c777
--- /dev/null
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -0,0 +1,32 @@
+/*
+ * OMAP44xx secure APIs file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number. It uses few CPU registers
+ * internally and hence they need be backed up including
+ * link register "lr".
+ * Function signature : void omap_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(omap_smc1)
+	stmfd   sp!, {r2-r12, lr}
+	mov	r12, r0
+	mov 	r0, r1
+	dsb
+	smc	#0
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_smc1)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 478ae58..b7a4133 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2,12 +2,12 @@
  * omap_hwmod implementation for OMAP2/3/4
  *
  * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- * With fixes and testing from Kevin Hilman
  *
- * Created in collaboration with (alphabetical order): Benoit Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ * Paul Walmsley, Benoît Cousson, Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Thara Gopinath,
+ * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
+ * Sawant, Santosh Shilimkar, Richard Woodruff
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -43,7 +43,6 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
-#include <linux/bootmem.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
@@ -58,7 +57,7 @@
 #define MAX_MODULE_RESET_WAIT		10000
 
 /* Name of the OMAP hwmod for the MPU */
-#define MPU_INITIATOR_NAME		"mpu_hwmod"
+#define MPU_INITIATOR_NAME		"mpu"
 
 /* omap_hwmod_list contains all registered struct omap_hwmods */
 static LIST_HEAD(omap_hwmod_list);
@@ -84,17 +83,16 @@ static u8 inited;
  */
 static int _update_sysc_cache(struct omap_hwmod *oh)
 {
-	if (!oh->sysconfig) {
-		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
-		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+	if (!oh->class->sysc) {
+		WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
 		return -EINVAL;
 	}
 
 	/* XXX ensure module interface clock is up */
 
-	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+	oh->_sysc_cache = omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
 
-	if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+	if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
 		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
 	return 0;
@@ -105,14 +103,13 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
  * @v: OCP_SYSCONFIG value to write
  * @oh: struct omap_hwmod *
  *
- * Write @v into the module OCP_SYSCONFIG register, if it has one.  No
- * return value.
+ * Write @v into the module class' OCP_SYSCONFIG register, if it has
+ * one.  No return value.
  */
 static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 {
-	if (!oh->sysconfig) {
-		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
-		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+	if (!oh->class->sysc) {
+		WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
 		return;
 	}
 
@@ -120,7 +117,7 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 
 	if (oh->_sysc_cache != v) {
 		oh->_sysc_cache = v;
-		omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
+		omap_hwmod_writel(v, oh, oh->class->sysc->sysc_offs);
 	}
 }
 
@@ -137,12 +134,23 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
 				   u32 *v)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
+	u32 mstandby_mask;
+	u8 mstandby_shift;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
 		return -EINVAL;
 
-	*v &= ~SYSC_MIDLEMODE_MASK;
-	*v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
+	mstandby_mask = (0x3 << mstandby_shift);
+
+	*v &= ~mstandby_mask;
+	*v |= __ffs(standbymode) << mstandby_shift;
 
 	return 0;
 }
@@ -159,12 +167,23 @@ static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
  */
 static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
+	u32 sidle_mask;
+	u8 sidle_shift;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
 		return -EINVAL;
 
-	*v &= ~SYSC_SIDLEMODE_MASK;
-	*v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
+	sidle_mask = (0x3 << sidle_shift);
+
+	*v &= ~sidle_mask;
+	*v |= __ffs(idlemode) << sidle_shift;
 
 	return 0;
 }
@@ -182,12 +201,23 @@ static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
  */
 static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+	u32 clkact_mask;
+	u8  clkact_shift;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
 		return -EINVAL;
+	}
 
-	*v &= ~SYSC_CLOCKACTIVITY_MASK;
-	*v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
+	clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
+	clkact_mask = (0x3 << clkact_shift);
+
+	*v &= ~clkact_mask;
+	*v |= clockact << clkact_shift;
 
 	return 0;
 }
@@ -202,11 +232,20 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
  */
 static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
+	u32 softrst_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
 		return -EINVAL;
 
-	*v |= SYSC_SOFTRESET_MASK;
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	*v |= softrst_mask;
 
 	return 0;
 }
@@ -227,12 +266,23 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
 				u32 *v)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE))
+	u32 autoidle_mask;
+	u8 autoidle_shift;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
 		return -EINVAL;
+	}
+
+	autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
+	autoidle_mask = (0x3 << autoidle_shift);
 
-	*v &= ~SYSC_AUTOIDLE_MASK;
-	*v |= autoidle << SYSC_AUTOIDLE_SHIFT;
+	*v &= ~autoidle_mask;
+	*v |= autoidle << autoidle_shift;
 
 	return 0;
 }
@@ -246,14 +296,21 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
  */
 static int _enable_wakeup(struct omap_hwmod *oh)
 {
-	u32 v;
+	u32 v, wakeup_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
 
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
 		return -EINVAL;
+	}
+
+	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
 
 	v = oh->_sysc_cache;
-	v |= SYSC_ENAWAKEUP_MASK;
+	v |= wakeup_mask;
 	_write_sysconfig(v, oh);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
@@ -272,14 +329,21 @@ static int _enable_wakeup(struct omap_hwmod *oh)
  */
 static int _disable_wakeup(struct omap_hwmod *oh)
 {
-	u32 v;
+	u32 v, wakeup_mask;
 
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
+
 	v = oh->_sysc_cache;
-	v &= ~SYSC_ENAWAKEUP_MASK;
+	v &= ~wakeup_mask;
 	_write_sysconfig(v, oh);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
@@ -299,15 +363,14 @@ static int _disable_wakeup(struct omap_hwmod *oh)
  * be accessed by the IVA, there should be a sleepdep between the IVA
  * initiator and the module).  Only applies to modules in smart-idle
  * mode.  Returns -EINVAL upon error or passes along
- * pwrdm_add_sleepdep() value upon success.
+ * clkdm_add_sleepdep() value upon success.
  */
 static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
 {
 	if (!oh->_clk)
 		return -EINVAL;
 
-	return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
-				  init_oh->_clk->clkdm->pwrdm.ptr);
+	return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
 }
 
 /**
@@ -320,15 +383,14 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  * be accessed by the IVA, there should be no sleepdep between the IVA
  * initiator and the module).  Only applies to modules in smart-idle
  * mode.  Returns -EINVAL upon error or passes along
- * pwrdm_add_sleepdep() value upon success.
+ * clkdm_del_sleepdep() value upon success.
  */
 static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
 {
 	if (!oh->_clk)
 		return -EINVAL;
 
-	return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
-				  init_oh->_clk->clkdm->pwrdm.ptr);
+	return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
 }
 
 /**
@@ -341,21 +403,21 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  */
 static int _init_main_clk(struct omap_hwmod *oh)
 {
-	struct clk *c;
 	int ret = 0;
 
-	if (!oh->clkdev_con_id)
+	if (!oh->main_clk)
 		return 0;
 
-	c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
-	WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
-	     oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
-	if (IS_ERR(c))
-		ret = -EINVAL;
-	oh->_clk = c;
+	oh->_clk = omap_clk_get_by_name(oh->main_clk);
+	if (!oh->_clk) {
+		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+			   oh->name, oh->main_clk);
+		return -EINVAL;
+	}
 
-	WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
-	     oh->clkdev_con_id, c->name);
+	if (!oh->_clk->clkdm)
+		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
+			   oh->main_clk, oh->_clk->name);
 
 	return ret;
 }
@@ -369,7 +431,6 @@ static int _init_main_clk(struct omap_hwmod *oh)
  */
 static int _init_interface_clks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	struct clk *c;
 	int i;
 	int ret = 0;
@@ -377,16 +438,18 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 	if (oh->slaves_cnt == 0)
 		return 0;
 
-	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
-		if (!os->clkdev_con_id)
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
+		if (!os->clk)
 			continue;
 
-		c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
-		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
-		     "interface_clk %s.%s\n", oh->name,
-		     os->clkdev_dev_id, os->clkdev_con_id);
-		if (IS_ERR(c))
+		c = omap_clk_get_by_name(os->clk);
+		if (!c) {
+			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -408,12 +471,12 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	int ret = 0;
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
-		c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
-		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
-		     "%s.%s\n", oh->name, oc->clkdev_dev_id,
-		     oc->clkdev_con_id);
-		if (IS_ERR(c))
+		c = omap_clk_get_by_name(oc->clk);
+		if (!c) {
+			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 
@@ -429,19 +492,19 @@ static int _init_opt_clks(struct omap_hwmod *oh)
  */
 static int _enable_clocks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
-	if (oh->_clk && !IS_ERR(oh->_clk))
+	if (oh->_clk)
 		clk_enable(oh->_clk);
 
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+			if (c && (os->flags & OCPIF_SWSUP_IDLE))
 				clk_enable(c);
 		}
 	}
@@ -459,19 +522,19 @@ static int _enable_clocks(struct omap_hwmod *oh)
  */
 static int _disable_clocks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 
 	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
 
-	if (oh->_clk && !IS_ERR(oh->_clk))
+	if (oh->_clk)
 		clk_disable(oh->_clk);
 
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+			if (c && (os->flags & OCPIF_SWSUP_IDLE))
 				clk_disable(c);
 		}
 	}
@@ -490,14 +553,15 @@ static int _disable_clocks(struct omap_hwmod *oh)
  */
 static int _find_mpu_port_index(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 	int found = 0;
 
 	if (!oh || oh->slaves_cnt == 0)
 		return -EINVAL;
 
-	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
 		if (os->user & OCP_USER_MPU) {
 			found = 1;
 			break;
@@ -532,7 +596,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 	if (!oh || oh->slaves_cnt == 0)
 		return NULL;
 
-	os = *oh->slaves + index;
+	os = oh->slaves[index];
 
 	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
 		if (mem->flags & ADDR_TYPE_RT) {
@@ -568,27 +632,28 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
  */
 static void _sysc_enable(struct omap_hwmod *oh)
 {
-	u8 idlemode;
+	u8 idlemode, sf;
 	u32 v;
 
-	if (!oh->sysconfig)
+	if (!oh->class->sysc)
 		return;
 
 	v = oh->_sysc_cache;
+	sf = oh->class->sysc->sysc_flags;
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+	if (sf & SYSC_HAS_SIDLEMODE) {
 		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
 			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+	if (sf & SYSC_HAS_MIDLEMODE) {
 		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
 			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) {
+	if (sf & SYSC_HAS_AUTOIDLE) {
 		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
 			0 : 1;
 		_set_module_autoidle(oh, idlemode, &v);
@@ -601,9 +666,9 @@ static void _sysc_enable(struct omap_hwmod *oh)
 	 * calling into this code.  But this must wait until the
 	 * clock structures are tagged with omap_hwmod entries
 	 */
-	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
-	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
-		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
+	if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
+	    (sf & SYSC_HAS_CLOCKACTIVITY))
+		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
 	_write_sysconfig(v, oh);
 }
@@ -619,21 +684,22 @@ static void _sysc_enable(struct omap_hwmod *oh)
  */
 static void _sysc_idle(struct omap_hwmod *oh)
 {
-	u8 idlemode;
+	u8 idlemode, sf;
 	u32 v;
 
-	if (!oh->sysconfig)
+	if (!oh->class->sysc)
 		return;
 
 	v = oh->_sysc_cache;
+	sf = oh->class->sysc->sysc_flags;
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+	if (sf & SYSC_HAS_SIDLEMODE) {
 		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
 			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+	if (sf & SYSC_HAS_MIDLEMODE) {
 		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
 			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
 		_set_master_standbymode(oh, idlemode, &v);
@@ -652,19 +718,21 @@ static void _sysc_idle(struct omap_hwmod *oh)
 static void _sysc_shutdown(struct omap_hwmod *oh)
 {
 	u32 v;
+	u8 sf;
 
-	if (!oh->sysconfig)
+	if (!oh->class->sysc)
 		return;
 
 	v = oh->_sysc_cache;
+	sf = oh->class->sysc->sysc_flags;
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
+	if (sf & SYSC_HAS_SIDLEMODE)
 		_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
+	if (sf & SYSC_HAS_MIDLEMODE)
 		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
 
-	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)
+	if (sf & SYSC_HAS_AUTOIDLE)
 		_set_module_autoidle(oh, 1, &v);
 
 	_write_sysconfig(v, oh);
@@ -716,9 +784,10 @@ static int _init_clocks(struct omap_hwmod *oh)
 	ret |= _init_interface_clks(oh);
 	ret |= _init_opt_clks(oh);
 
-	oh->_state = _HWMOD_STATE_CLKS_INITED;
+	if (!ret)
+		oh->_state = _HWMOD_STATE_CLKS_INITED;
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -741,9 +810,9 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
 		return 0;
 
-	os = *oh->slaves + oh->_mpu_port_index;
+	os = oh->slaves[oh->_mpu_port_index];
 
-	if (!(os->flags & OCPIF_HAS_IDLEST))
+	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
 	/* XXX check module SIDLEMODE */
@@ -754,11 +823,8 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
 						 oh->prcm.omap2.idlest_reg_id,
 						 oh->prcm.omap2.idlest_idle_bit);
-#if 0
 	} else if (cpu_is_omap44xx()) {
-		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
-						 oh->prcm.omap4.device_offs);
-#endif
+		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg);
 	} else {
 		BUG();
 	};
@@ -781,9 +847,9 @@ static int _reset(struct omap_hwmod *oh)
 	u32 r, v;
 	int c = 0;
 
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
-	    (oh->sysconfig->sysc_flags & SYSS_MISSING))
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
+	    (oh->class->sysc->sysc_flags & SYSS_MISSING))
 		return -EINVAL;
 
 	/* clocks must be on for this operation */
@@ -801,7 +867,7 @@ static int _reset(struct omap_hwmod *oh)
 		return r;
 	_write_sysconfig(v, oh);
 
-	omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+	omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
 			   SYSS_RESETDONE_MASK),
 			  MAX_MODULE_RESET_WAIT, c);
 
@@ -847,16 +913,21 @@ static int _enable(struct omap_hwmod *oh)
 	_add_initiator_dep(oh, mpu_oh);
 	_enable_clocks(oh);
 
-	if (oh->sysconfig) {
-		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
-			_update_sysc_cache(oh);
-		_sysc_enable(oh);
-	}
-
 	r = _wait_target_ready(oh);
-	if (!r)
+	if (!r) {
 		oh->_state = _HWMOD_STATE_ENABLED;
 
+		/* Access the sysconfig only if the target is ready */
+		if (oh->class->sysc) {
+			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+				_update_sysc_cache(oh);
+			_sysc_enable(oh);
+		}
+	} else {
+		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
+			 oh->name, r);
+	}
+
 	return r;
 }
 
@@ -878,7 +949,7 @@ static int _idle(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
-	if (oh->sysconfig)
+	if (oh->class->sysc)
 		_sysc_idle(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
@@ -908,7 +979,7 @@ static int _shutdown(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
-	if (oh->sysconfig)
+	if (oh->class->sysc)
 		_sysc_shutdown(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	/* XXX what about the other system initiators here? DMA, tesla, d2d */
@@ -933,18 +1004,18 @@ static int _shutdown(struct omap_hwmod *oh)
  */
 static int _setup(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
-	int i;
+	int i, r;
 
 	if (!oh)
 		return -EINVAL;
 
 	/* Set iclk autoidle mode */
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (!c || IS_ERR(c))
+			if (!c)
 				continue;
 
 			if (os->flags & OCPIF_SWSUP_IDLE) {
@@ -958,7 +1029,12 @@ static int _setup(struct omap_hwmod *oh)
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-	_enable(oh);
+	r = _enable(oh);
+	if (r) {
+		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
+			   oh->name, oh->_state);
+		return 0;
+	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
 		/*
@@ -968,7 +1044,7 @@ static int _setup(struct omap_hwmod *oh)
 		 * _enable() function should be split to avoid the
 		 * rewrite of the OCP_SYSCONFIG register.
 		 */
-		if (oh->sysconfig) {
+		if (oh->class->sysc) {
 			_update_sysc_cache(oh);
 			_sysc_enable(oh);
 		}
@@ -994,13 +1070,33 @@ void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 	__raw_writel(v, oh->_rt_va + reg_offs);
 }
 
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
+{
+	u32 v;
+	int retval = 0;
+
+	if (!oh)
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+
+	retval = _set_slave_idlemode(oh, idlemode, &v);
+	if (!retval)
+		_write_sysconfig(v, oh);
+
+	return retval;
+}
+
 /**
  * omap_hwmod_register - register a struct omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod already
- * has been registered by the same name; -EINVAL if the omap_hwmod is in the
- * wrong state, or 0 on success.
+ * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod
+ * already has been registered by the same name; -EINVAL if the
+ * omap_hwmod is in the wrong state, if @oh is NULL, if the
+ * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
+ * name, or if the omap_hwmod's class is missing a name; or 0 upon
+ * success.
  *
  * XXX The data should be copied into bootmem, so the original data
  * should be marked __initdata and freed after init.  This would allow
@@ -1012,7 +1108,8 @@ int omap_hwmod_register(struct omap_hwmod *oh)
 {
 	int ret, ms_id;
 
-	if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
+	if (!oh || !oh->name || !oh->class || !oh->class->name ||
+	    (oh->_state != _HWMOD_STATE_UNKNOWN))
 		return -EINVAL;
 
 	mutex_lock(&omap_hwmod_mutex);
@@ -1285,7 +1382,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
 {
 	BUG_ON(!oh);
 
-	if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
+	if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
 		WARN(1, "omap_device: %s: OCP barrier impossible due to "
 		      "device configuration\n", oh->name);
 		return;
@@ -1295,7 +1392,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
 	 * Forces posted writes to complete on the OCP thread handling
 	 * register writes
 	 */
-	omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+	omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
 }
 
 /**
@@ -1345,7 +1442,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
-		ret += (*oh->slaves + i)->addr_cnt;
+		ret += oh->slaves[i]->addr_cnt;
 
 	return ret;
 }
@@ -1386,7 +1483,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 	for (i = 0; i < oh->slaves_cnt; i++) {
 		struct omap_hwmod_ocp_if *os;
 
-		os = *oh->slaves + i;
+		os = oh->slaves[i];
 
 		for (j = 0; j < os->addr_cnt; j++) {
 			(res + r)->start = (os->addr + j)->pa_start;
@@ -1425,6 +1522,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 		c = oh->slaves[oh->_mpu_port_index]->_clk;
 	}
 
+	if (!c->clkdm)
+		return NULL;
+
 	return c->clkdm->pwrdm.ptr;
 
 }
@@ -1488,8 +1588,8 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
  */
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
 	mutex_lock(&omap_hwmod_mutex);
@@ -1513,8 +1613,8 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 {
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
 	mutex_lock(&omap_hwmod_mutex);
@@ -1523,3 +1623,52 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+/**
+ * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
+ * @classname: struct omap_hwmod_class name to search for
+ * @fn: callback function pointer to call for each hwmod in class @classname
+ * @user: arbitrary context data to pass to the callback function
+ *
+ * For each omap_hwmod of class @classname, call @fn.  Takes
+ * omap_hwmod_mutex to prevent the hwmod list from changing during the
+ * iteration.  If the callback function returns something other than
+ * zero, the iterator is terminated, and the callback function's return
+ * value is passed back to the caller.  Returns 0 upon success, -EINVAL
+ * if @classname or @fn are NULL, or passes back the error code from @fn.
+ */
+int omap_hwmod_for_each_by_class(const char *classname,
+				 int (*fn)(struct omap_hwmod *oh,
+					   void *user),
+				 void *user)
+{
+	struct omap_hwmod *temp_oh;
+	int ret = 0;
+
+	if (!classname || !fn)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
+		 __func__, classname);
+
+	mutex_lock(&omap_hwmod_mutex);
+
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		if (!strcmp(temp_oh->class->name, classname)) {
+			pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
+				 __func__, temp_oh->name);
+			ret = (*fn)(temp_oh, user);
+			if (ret)
+				break;
+		}
+	}
+
+	mutex_unlock(&omap_hwmod_mutex);
+
+	if (ret)
+		pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
+			 __func__, ret);
+
+	return ret;
+}
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
deleted file mode 100644
index a9ca1b9..0000000
--- a/arch/arm/mach-omap2/omap_hwmod_2420.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
-
-#ifdef CONFIG_ARCH_OMAP2420
-
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-
-#include "prm-regbits-24xx.h"
-
-static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_l3_hwmod;
-static struct omap_hwmod omap2420_l4_core_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
-	.master	= &omap2420_l3_hwmod,
-	.slave	= &omap2420_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
-	.master = &omap2420_mpu_hwmod,
-	.slave	= &omap2420_l3_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
-	&omap2420_mpu__l3,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
-	&omap2420_l3__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2420_l3_hwmod = {
-	.name		= "l3_hwmod",
-	.masters	= omap2420_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
-	.slaves		= omap2420_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
-};
-
-static struct omap_hwmod omap2420_l4_wkup_hwmod;
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
-	.master	= &omap2420_l4_core_hwmod,
-	.slave	= &omap2420_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
-	&omap2420_l3__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
-	&omap2420_l4_core__l4_wkup,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2420_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
-	.masters	= omap2420_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
-	.slaves		= omap2420_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
-	&omap2420_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2420_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
-	.masters	= omap2420_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
-	.slaves		= omap2420_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
-	&omap2420_mpu__l3,
-};
-
-/* MPU */
-static struct omap_hwmod omap2420_mpu_hwmod = {
-	.name		= "mpu_hwmod",
-	.clkdev_dev_id	= NULL,
-	.clkdev_con_id	= "mpu_ck",
-	.masters	= omap2420_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static __initdata struct omap_hwmod *omap2420_hwmods[] = {
-	&omap2420_l3_hwmod,
-	&omap2420_l4_core_hwmod,
-	&omap2420_l4_wkup_hwmod,
-	&omap2420_mpu_hwmod,
-	NULL,
-};
-
-#else
-# define omap2420_hwmods		0
-#endif
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
new file mode 100644
index 0000000..e5530c5
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -0,0 +1,149 @@
+/*
+ * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ * XXX these should be marked initdata for multi-OMAP kernels
+ */
+#include <plat/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "prm-regbits-24xx.h"
+
+/*
+ * OMAP2420 hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation.  Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
+static struct omap_hwmod omap2420_mpu_hwmod;
+static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
+	.master	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+	.master = &omap2420_mpu_hwmod,
+	.slave	= &omap2420_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
+	&omap2420_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2420_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.class		= &l3_hwmod_class,
+	.masters	= omap2420_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
+	.slaves		= omap2420_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+static struct omap_hwmod omap2420_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
+	.master	= &omap2420_l4_core_hwmod,
+	.slave	= &omap2420_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2420_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap2420_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
+	.slaves		= omap2420_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2420_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap2420_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
+	.slaves		= omap2420_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
+	&omap2420_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2420_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &mpu_hwmod_class,
+	.main_clk	= "mpu_ck",
+	.masters	= omap2420_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static __initdata struct omap_hwmod *omap2420_hwmods[] = {
+	&omap2420_l3_hwmod,
+	&omap2420_l4_core_hwmod,
+	&omap2420_l4_wkup_hwmod,
+	&omap2420_mpu_hwmod,
+	NULL,
+};
+
+int __init omap2420_hwmod_init(void)
+{
+	return omap_hwmod_init(omap2420_hwmods);
+}
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
deleted file mode 100644
index 59a208b..0000000
--- a/arch/arm/mach-omap2/omap_hwmod_2430.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
-
-#ifdef CONFIG_ARCH_OMAP2430
-
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-
-#include "prm-regbits-24xx.h"
-
-static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_l3_hwmod;
-static struct omap_hwmod omap2430_l4_core_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
-	.master	= &omap2430_l3_hwmod,
-	.slave	= &omap2430_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
-	.master = &omap2430_mpu_hwmod,
-	.slave	= &omap2430_l3_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
-	&omap2430_mpu__l3,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
-	&omap2430_l3__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2430_l3_hwmod = {
-	.name		= "l3_hwmod",
-	.masters	= omap2430_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
-	.slaves		= omap2430_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
-};
-
-static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
-	.master	= &omap2430_l4_core_hwmod,
-	.slave	= &omap2430_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
-	&omap2430_l3__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
-	&omap2430_l4_core__l4_wkup,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2430_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
-	.masters	= omap2430_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
-	.slaves		= omap2430_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
-	&omap2430_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2430_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
-	.masters	= omap2430_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
-	.slaves		= omap2430_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
-	&omap2430_mpu__l3,
-};
-
-/* MPU */
-static struct omap_hwmod omap2430_mpu_hwmod = {
-	.name		= "mpu_hwmod",
-	.clkdev_dev_id	= NULL,
-	.clkdev_con_id	= "mpu_ck",
-	.masters	= omap2430_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static __initdata struct omap_hwmod *omap2430_hwmods[] = {
-	&omap2430_l3_hwmod,
-	&omap2430_l4_core_hwmod,
-	&omap2430_l4_wkup_hwmod,
-	&omap2430_mpu_hwmod,
-	NULL,
-};
-
-#else
-# define omap2430_hwmods		0
-#endif
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
new file mode 100644
index 0000000..0852d95
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -0,0 +1,151 @@
+/*
+ * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ * XXX these should be marked initdata for multi-OMAP kernels
+ */
+#include <plat/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "prm-regbits-24xx.h"
+
+/*
+ * OMAP2430 hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation.  Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
+static struct omap_hwmod omap2430_mpu_hwmod;
+static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
+	.master	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+	.master = &omap2430_mpu_hwmod,
+	.slave	= &omap2430_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
+	&omap2430_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2430_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.class		= &l3_hwmod_class,
+	.masters	= omap2430_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
+	.slaves		= omap2430_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_mmc1_hwmod;
+static struct omap_hwmod omap2430_mmc2_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
+	.master	= &omap2430_l4_core_hwmod,
+	.slave	= &omap2430_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2430_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap2430_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
+	.slaves		= omap2430_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2430_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap2430_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
+	.slaves		= omap2430_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
+	&omap2430_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2430_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &mpu_hwmod_class,
+	.main_clk	= "mpu_ck",
+	.masters	= omap2430_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static __initdata struct omap_hwmod *omap2430_hwmods[] = {
+	&omap2430_l3_hwmod,
+	&omap2430_l4_core_hwmod,
+	&omap2430_l4_wkup_hwmod,
+	&omap2430_mpu_hwmod,
+	NULL,
+};
+
+int __init omap2430_hwmod_init(void)
+{
+	return omap_hwmod_init(omap2430_hwmods);
+}
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
deleted file mode 100644
index b6076b9..0000000
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
-
-#ifdef CONFIG_ARCH_OMAP34XX
-
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-
-#include "prm-regbits-34xx.h"
-
-static struct omap_hwmod omap34xx_mpu_hwmod;
-static struct omap_hwmod omap34xx_l3_hwmod;
-static struct omap_hwmod omap34xx_l4_core_hwmod;
-static struct omap_hwmod omap34xx_l4_per_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
-	.master	= &omap34xx_l3_hwmod,
-	.slave	= &omap34xx_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
-	.master = &omap34xx_l3_hwmod,
-	.slave	= &omap34xx_l4_per_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
-	.master = &omap34xx_mpu_hwmod,
-	.slave	= &omap34xx_l3_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
-	&omap34xx_mpu__l3,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
-	&omap34xx_l3__l4_core,
-	&omap34xx_l3__l4_per,
-};
-
-/* L3 */
-static struct omap_hwmod omap34xx_l3_hwmod = {
-	.name		= "l3_hwmod",
-	.masters	= omap34xx_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap34xx_l3_masters),
-	.slaves		= omap34xx_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-static struct omap_hwmod omap34xx_l4_wkup_hwmod;
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
-	.master	= &omap34xx_l4_core_hwmod,
-	.slave	= &omap34xx_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
-	&omap34xx_l3__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
-	&omap34xx_l4_core__l4_wkup,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap34xx_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
-	.masters	= omap34xx_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_core_masters),
-	.slaves		= omap34xx_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Slave interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
-	&omap34xx_l3__l4_per,
-};
-
-/* Master interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
-};
-
-/* L4 PER */
-static struct omap_hwmod omap34xx_l4_per_hwmod = {
-	.name		= "l4_per_hwmod",
-	.masters	= omap34xx_l4_per_masters,
-	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_per_masters),
-	.slaves		= omap34xx_l4_per_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_per_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
-	&omap34xx_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
-	.masters	= omap34xx_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_masters),
-	.slaves		= omap34xx_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
-	&omap34xx_mpu__l3,
-};
-
-/* MPU */
-static struct omap_hwmod omap34xx_mpu_hwmod = {
-	.name		= "mpu_hwmod",
-	.clkdev_dev_id	= NULL,
-	.clkdev_con_id	= "arm_fck",
-	.masters	= omap34xx_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap34xx_mpu_masters),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
-	&omap34xx_l3_hwmod,
-	&omap34xx_l4_core_hwmod,
-	&omap34xx_l4_per_hwmod,
-	&omap34xx_l4_wkup_hwmod,
-	&omap34xx_mpu_hwmod,
-	NULL,
-};
-
-#else
-# define omap34xx_hwmods		0
-#endif
-
-#endif
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
new file mode 100644
index 0000000..39b0c0e
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -0,0 +1,181 @@
+/*
+ * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The data in this file should be completely autogeneratable from
+ * the TI hardware database or other technical documentation.
+ *
+ * XXX these should be marked initdata for multi-OMAP kernels
+ */
+#include <plat/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "prm-regbits-34xx.h"
+
+/*
+ * OMAP3xxx hardware module integration data
+ *
+ * ALl of the data in this section should be autogeneratable from the
+ * TI hardware database or other technical documentation.  Data that
+ * is driver-specific or driver-kernel integration-specific belongs
+ * elsewhere.
+ */
+
+static struct omap_hwmod omap3xxx_mpu_hwmod;
+static struct omap_hwmod omap3xxx_l3_hwmod;
+static struct omap_hwmod omap3xxx_l4_core_hwmod;
+static struct omap_hwmod omap3xxx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = {
+	.master	= &omap3xxx_l3_hwmod,
+	.slave	= &omap3xxx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = {
+	.master = &omap3xxx_l3_hwmod,
+	.slave	= &omap3xxx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = {
+	.master = &omap3xxx_mpu_hwmod,
+	.slave	= &omap3xxx_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = {
+	&omap3xxx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = {
+	&omap3xxx_l3__l4_core,
+	&omap3xxx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap3xxx_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.class		= &l3_hwmod_class,
+	.masters	= omap3xxx_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_masters),
+	.slaves		= omap3xxx_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
+	.master	= &omap3xxx_l4_core_hwmod,
+	.slave	= &omap3xxx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
+	&omap3xxx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
+	&omap3xxx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap3xxx_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap3xxx_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_core_masters),
+	.slaves		= omap3xxx_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
+	&omap3xxx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap3xxx_l4_per_hwmod = {
+	.name		= "l4_per_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap3xxx_l4_per_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_per_masters),
+	.slaves		= omap3xxx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
+	&omap3xxx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.class		= &l4_hwmod_class,
+	.masters	= omap3xxx_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_masters),
+	.slaves		= omap3xxx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
+	&omap3xxx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap3xxx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &mpu_hwmod_class,
+	.main_clk	= "arm_fck",
+	.masters	= omap3xxx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
+	&omap3xxx_l3_hwmod,
+	&omap3xxx_l4_core_hwmod,
+	&omap3xxx_l4_per_hwmod,
+	&omap3xxx_l4_wkup_hwmod,
+	&omap3xxx_mpu_hwmod,
+	NULL,
+};
+
+int __init omap3xxx_hwmod_init(void)
+{
+	return omap_hwmod_init(omap3xxx_hwmods);
+}
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
new file mode 100644
index 0000000..1e80b91
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -0,0 +1,68 @@
+/*
+ * omap_hwmod common data structures
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ * Benoît Cousson
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This data/structures are to be used while defining OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ */
+
+#include <plat/omap_hwmod.h>
+
+#include "omap_hwmod_common_data.h"
+
+/**
+ * struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
+ *
+ * To be used by hwmod structure to specify the sysconfig offsets
+ * if the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420.
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = {
+	.midle_shift	= SYSC_TYPE1_MIDLEMODE_SHIFT,
+	.clkact_shift	= SYSC_TYPE1_CLOCKACTIVITY_SHIFT,
+	.sidle_shift	= SYSC_TYPE1_SIDLEMODE_SHIFT,
+	.enwkup_shift	= SYSC_TYPE1_ENAWAKEUP_SHIFT,
+	.srst_shift	= SYSC_TYPE1_SOFTRESET_SHIFT,
+	.autoidle_shift	= SYSC_TYPE1_AUTOIDLE_SHIFT,
+};
+
+/**
+ * struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
+ *
+ * To be used by hwmod structure to specify the sysconfig offsets if the
+ * device ip is compliant with the new PRCM protocol defined for new
+ * OMAP4 IPs.
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
+	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
+	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
+	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
+};
+
+
+/*
+ * omap_hwmod class data
+ */
+
+struct omap_hwmod_class l3_hwmod_class = {
+	.name = "l3"
+};
+
+struct omap_hwmod_class l4_hwmod_class = {
+	.name = "l4"
+};
+
+struct omap_hwmod_class mpu_hwmod_class = {
+	.name = "mpu"
+};
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
new file mode 100644
index 0000000..3645a28
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -0,0 +1,24 @@
+/*
+ * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Benoît Cousson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
+
+#include <plat/omap_hwmod.h>
+
+/* OMAP hwmod classes - forward declarations */
+extern struct omap_hwmod_class l3_hwmod_class;
+extern struct omap_hwmod_class l4_hwmod_class;
+extern struct omap_hwmod_class mpu_hwmod_class;
+
+#endif
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
index ed6df04..38b7305 100644
--- a/arch/arm/mach-omap2/opp2xxx.h
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -417,7 +417,12 @@ struct prcm_config {
 
 
 extern const struct prcm_config omap2420_rate_table[];
+
+#ifdef CONFIG_ARCH_OMAP2430
 extern const struct prcm_config omap2430_rate_table[];
+#else
+#define omap2430_rate_table	NULL
+#endif
 extern const struct prcm_config *rate_table;
 extern const struct prcm_config *curr_prcm_set;
 
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a086626..723b44e 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 
 #include <plat/clock.h>
 #include <plat/board.h>
@@ -67,9 +68,9 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 #if 0
 		/* MPU */
 		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
-		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
-		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
-		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+		DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL);
+		DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST);
 		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
 #endif
 #if 0
@@ -93,7 +94,7 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
 		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
 		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
-		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+		DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST);
 #endif
 #if 0
 		/* DSP */
@@ -103,11 +104,11 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
 			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
 			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
-			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
-			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL);
+			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST);
 		}
 #endif
 	} else {
@@ -385,6 +386,11 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
 		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
 			pwrdm->state_counter[i]);
 
+	seq_printf(s, ",RET-LOGIC-OFF:%d", pwrdm->ret_logic_off_counter);
+	for (i = 0; i < pwrdm->banks; i++)
+		seq_printf(s, ",RET-MEMBANK%d-OFF:%d", i + 1,
+				pwrdm->ret_mem_off_counter[i]);
+
 	seq_printf(s, "\n");
 
 	return 0;
@@ -542,6 +548,9 @@ static int option_set(void *data, u64 val)
 {
 	u32 *option = data;
 
+	if (option == &wakeup_timer_milliseconds && val >= 1000)
+		return -EINVAL;
+
 	*option = val;
 
 	if (option == &enable_off_mode)
@@ -577,7 +586,7 @@ static int __init pm_dbg_init(void)
 	(void) debugfs_create_file("time", S_IRUGO,
 		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-	pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
+	pwrdm_for_each(pwrdms_setup, (void *)d);
 
 	pm_dbg_dir = debugfs_create_dir("registers", d);
 	if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 7a9c2d0..3de6ece 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -23,10 +23,27 @@ extern int omap3_can_sleep(void);
 extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 
+struct cpuidle_params {
+	u8  valid;
+	u32 sleep_latency;
+	u32 wake_latency;
+	u32 threshold;
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
+extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
+#else
+static
+inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+}
+#endif
+
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
 extern u32 wakeup_timer_seconds;
+extern u32 wakeup_timer_milliseconds;
 extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
@@ -37,6 +54,10 @@ extern int omap2_pm_debug;
 #define omap2_pm_debug				0
 #endif
 
+#if defined(CONFIG_CPU_IDLE)
+extern void omap3_cpuidle_update_states(void);
+#endif
+
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index cba05b9..e321281 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -57,11 +57,8 @@ static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
 
-static struct powerdomain *mpu_pwrdm;
-static struct powerdomain *core_pwrdm;
-
-static struct clockdomain *dsp_clkdm;
-static struct clockdomain *gfx_clkdm;
+static struct powerdomain *mpu_pwrdm, *core_pwrdm;
+static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
 
 static struct clk *osc_ck, *emul_ck;
 
@@ -73,8 +70,8 @@ static int omap2_fclks_active(void)
 	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 
 	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
-	f2 &= ~OMAP24XX_EN_UART3;
+	f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
+	f2 &= ~OMAP24XX_EN_UART3_MASK;
 
 	if (f1 | f2)
 		return 1;
@@ -110,7 +107,7 @@ static void omap2_enter_full_retention(void)
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	omap2_gpio_prepare_for_retention();
+	omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
 
 	if (omap2_pm_debug) {
 		omap2_pm_dump(0, 0, 0);
@@ -144,7 +141,7 @@ no_sleep:
 		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
 		omap2_pm_dump(0, 1, tmp);
 	}
-	omap2_gpio_resume_after_retention();
+	omap2_gpio_resume_after_idle();
 
 	clk_enable(osc_ck);
 
@@ -173,7 +170,7 @@ static int omap2_i2c_active(void)
 	u32 l;
 
 	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
 }
 
 static int sti_console_enabled;
@@ -184,13 +181,13 @@ static int omap2_allow_mpu_retention(void)
 
 	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
 	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
-		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
-		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
 		return 0;
 	/* Check for UART3. */
 	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3)
+	if (l & OMAP24XX_EN_UART3_MASK)
 		return 0;
 	if (sti_console_enabled)
 		return 0;
@@ -218,12 +215,13 @@ static void omap2_enter_mpu_retention(void)
 
 		/* Try to enter MPU retention */
 		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
-				  OMAP_LOGICRETSTATE,
-				  MPU_MOD, PM_PWSTCTRL);
+				  OMAP_LOGICRETSTATE_MASK,
+				  MPU_MOD, OMAP2_PM_PWSTCTRL);
 	} else {
 		/* Block MPU retention */
 
-		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+		prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
+						 OMAP2_PM_PWSTCTRL);
 		only_idle = 1;
 	}
 
@@ -290,7 +288,8 @@ static int omap2_pm_suspend(void)
 	u32 wken_wkup, mir1;
 
 	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+	wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 
 	/* Mask GPT1 */
 	mir1 = omap_readl(0x480fe0a4);
@@ -333,9 +332,17 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
+/* XXX This function should be shareable between OMAP2xxx and OMAP3 */
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	omap2_clkdm_allow_idle(clkdm);
+	clkdm_clear_all_wkdeps(clkdm);
+	clkdm_clear_all_sleepdeps(clkdm);
+
+	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+		omap2_clkdm_allow_idle(clkdm);
+	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+		 atomic_read(&clkdm->usecount) == 0)
+		omap2_clkdm_sleep(clkdm);
 	return 0;
 }
 
@@ -345,17 +352,9 @@ static void __init prcm_setup_regs(void)
 	struct powerdomain *pwrdm;
 
 	/* Enable autoidle */
-	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
 			  OMAP2_PRCM_SYSCONFIG_OFFSET);
 
-	/* Set all domain wakeup dependencies */
-	prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
-	if (cpu_is_omap2430())
-		prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
-
 	/*
 	 * Set CORE powerdomain memory banks to retain their contents
 	 * during RETENTION
@@ -384,57 +383,62 @@ static void __init prcm_setup_regs(void)
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
 	omap2_clkdm_sleep(gfx_clkdm);
 
-	/* Enable clockdomain hardware-supervised control for all clkdms */
-	clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
+	/*
+	 * Clear clockdomain wakeup dependencies and enable
+	 * hardware-supervised idle for all clkdms
+	 */
+	clkdm_for_each(clkdms_setup, NULL);
+	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
 	/* Enable clock autoidle for all domains */
-	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
-			 OMAP24XX_AUTO_MAILBOXES |
-			 OMAP24XX_AUTO_WDT4 |
-			 OMAP2420_AUTO_WDT3 |
-			 OMAP24XX_AUTO_MSPRO |
-			 OMAP2420_AUTO_MMC |
-			 OMAP24XX_AUTO_FAC |
-			 OMAP2420_AUTO_EAC |
-			 OMAP24XX_AUTO_HDQ |
-			 OMAP24XX_AUTO_UART2 |
-			 OMAP24XX_AUTO_UART1 |
-			 OMAP24XX_AUTO_I2C2 |
-			 OMAP24XX_AUTO_I2C1 |
-			 OMAP24XX_AUTO_MCSPI2 |
-			 OMAP24XX_AUTO_MCSPI1 |
-			 OMAP24XX_AUTO_MCBSP2 |
-			 OMAP24XX_AUTO_MCBSP1 |
-			 OMAP24XX_AUTO_GPT12 |
-			 OMAP24XX_AUTO_GPT11 |
-			 OMAP24XX_AUTO_GPT10 |
-			 OMAP24XX_AUTO_GPT9 |
-			 OMAP24XX_AUTO_GPT8 |
-			 OMAP24XX_AUTO_GPT7 |
-			 OMAP24XX_AUTO_GPT6 |
-			 OMAP24XX_AUTO_GPT5 |
-			 OMAP24XX_AUTO_GPT4 |
-			 OMAP24XX_AUTO_GPT3 |
-			 OMAP24XX_AUTO_GPT2 |
-			 OMAP2420_AUTO_VLYNQ |
-			 OMAP24XX_AUTO_DSS,
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
+			 OMAP24XX_AUTO_MAILBOXES_MASK |
+			 OMAP24XX_AUTO_WDT4_MASK |
+			 OMAP2420_AUTO_WDT3_MASK |
+			 OMAP24XX_AUTO_MSPRO_MASK |
+			 OMAP2420_AUTO_MMC_MASK |
+			 OMAP24XX_AUTO_FAC_MASK |
+			 OMAP2420_AUTO_EAC_MASK |
+			 OMAP24XX_AUTO_HDQ_MASK |
+			 OMAP24XX_AUTO_UART2_MASK |
+			 OMAP24XX_AUTO_UART1_MASK |
+			 OMAP24XX_AUTO_I2C2_MASK |
+			 OMAP24XX_AUTO_I2C1_MASK |
+			 OMAP24XX_AUTO_MCSPI2_MASK |
+			 OMAP24XX_AUTO_MCSPI1_MASK |
+			 OMAP24XX_AUTO_MCBSP2_MASK |
+			 OMAP24XX_AUTO_MCBSP1_MASK |
+			 OMAP24XX_AUTO_GPT12_MASK |
+			 OMAP24XX_AUTO_GPT11_MASK |
+			 OMAP24XX_AUTO_GPT10_MASK |
+			 OMAP24XX_AUTO_GPT9_MASK |
+			 OMAP24XX_AUTO_GPT8_MASK |
+			 OMAP24XX_AUTO_GPT7_MASK |
+			 OMAP24XX_AUTO_GPT6_MASK |
+			 OMAP24XX_AUTO_GPT5_MASK |
+			 OMAP24XX_AUTO_GPT4_MASK |
+			 OMAP24XX_AUTO_GPT3_MASK |
+			 OMAP24XX_AUTO_GPT2_MASK |
+			 OMAP2420_AUTO_VLYNQ_MASK |
+			 OMAP24XX_AUTO_DSS_MASK,
 			 CORE_MOD, CM_AUTOIDLE1);
-	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
-			 OMAP24XX_AUTO_SSI |
-			 OMAP24XX_AUTO_USB,
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
+			 OMAP24XX_AUTO_SSI_MASK |
+			 OMAP24XX_AUTO_USB_MASK,
 			 CORE_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
-			 OMAP24XX_AUTO_GPMC |
-			 OMAP24XX_AUTO_SDMA,
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
+			 OMAP24XX_AUTO_GPMC_MASK |
+			 OMAP24XX_AUTO_SDMA_MASK,
 			 CORE_MOD, CM_AUTOIDLE3);
-	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
-			 OMAP24XX_AUTO_AES |
-			 OMAP24XX_AUTO_RNG |
-			 OMAP24XX_AUTO_SHA |
-			 OMAP24XX_AUTO_DES,
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
+			 OMAP24XX_AUTO_AES_MASK |
+			 OMAP24XX_AUTO_RNG_MASK |
+			 OMAP24XX_AUTO_SHA_MASK |
+			 OMAP24XX_AUTO_DES_MASK,
 			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
 
-	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
+			 CM_AUTOIDLE);
 
 	/* Put DPLL and both APLLs into autoidle mode */
 	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
@@ -442,12 +446,12 @@ static void __init prcm_setup_regs(void)
 			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
 			 PLL_MOD, CM_AUTOIDLE);
 
-	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
-			 OMAP24XX_AUTO_WDT1 |
-			 OMAP24XX_AUTO_MPU_WDT |
-			 OMAP24XX_AUTO_GPIOS |
-			 OMAP24XX_AUTO_32KSYNC |
-			 OMAP24XX_AUTO_GPT1,
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
+			 OMAP24XX_AUTO_WDT1_MASK |
+			 OMAP24XX_AUTO_MPU_WDT_MASK |
+			 OMAP24XX_AUTO_GPIOS_MASK |
+			 OMAP24XX_AUTO_32KSYNC_MASK |
+			 OMAP24XX_AUTO_GPT1_MASK,
 			 WKUP_MOD, CM_AUTOIDLE);
 
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
@@ -458,15 +462,15 @@ static void __init prcm_setup_regs(void)
 	/* Configure automatic voltage transition */
 	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
 			  OMAP2_PRCM_VOLTSETUP_OFFSET);
-	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
 			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-			  OMAP24XX_MEMRETCTRL |
+			  OMAP24XX_MEMRETCTRL_MASK |
 			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
 			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
 			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
 
 	/* Enable wake-up events */
-	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
 			  WKUP_MOD, PM_WKEN);
 }
 
@@ -481,7 +485,7 @@ static int __init omap2_pm_init(void)
 	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
 	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 
-	/* Look up important powerdomains, clockdomains */
+	/* Look up important powerdomains */
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (!mpu_pwrdm)
@@ -491,9 +495,19 @@ static int __init omap2_pm_init(void)
 	if (!core_pwrdm)
 		pr_err("PM: core_pwrdm not found\n");
 
+	/* Look up important clockdomains */
+
+	mpu_clkdm = clkdm_lookup("mpu_clkdm");
+	if (!mpu_clkdm)
+		pr_err("PM: mpu_clkdm not found\n");
+
+	wkup_clkdm = clkdm_lookup("wkup_clkdm");
+	if (!wkup_clkdm)
+		pr_err("PM: wkup_clkdm not found\n");
+
 	dsp_clkdm = clkdm_lookup("dsp_clkdm");
 	if (!dsp_clkdm)
-		pr_err("PM: mpu_clkdm not found\n");
+		pr_err("PM: dsp_clkdm not found\n");
 
 	gfx_clkdm = clkdm_lookup("gfx_clkdm");
 	if (!gfx_clkdm)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 910a7ac..b88737f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -57,6 +58,7 @@
 u32 enable_off_mode;
 u32 sleep_while_idle;
 u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -92,20 +94,21 @@ static void omap3_enable_io_chain(void)
 	int timeout = 0;
 
 	if (omap_rev() >= OMAP3430_REV_ES3_1) {
-		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
-			 OMAP3430_ST_IO_CHAIN)) {
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
 				printk(KERN_ERR "Wake up daisy chain "
 				       "activation failed.\n");
 				return;
 			}
-			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
-					     WKUP_MOD, PM_WKST);
+			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }
@@ -113,7 +116,8 @@ static void omap3_enable_io_chain(void)
 static void omap3_disable_io_chain(void)
 {
 	if (omap_rev() >= OMAP3430_REV_ES3_1)
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				       PM_WKEN);
 }
 
 static void omap3_core_save_context(void)
@@ -266,14 +270,18 @@ static int _prcm_int_handle_wakeup(void)
  */
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 {
-	u32 irqstatus_mpu;
+	u32 irqenable_mpu, irqstatus_mpu;
 	int c = 0;
 
-	do {
-		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqstatus_mpu &= irqenable_mpu;
 
-		if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+	do {
+		if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
+				     OMAP3430_IO_ST_MASK)) {
 			c = _prcm_int_handle_wakeup();
 
 			/*
@@ -291,7 +299,11 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+		irqstatus_mpu &= irqenable_mpu;
+
+	} while (irqstatus_mpu);
 
 	return IRQ_HANDLED;
 }
@@ -370,12 +382,19 @@ void omap_sram_idle(void)
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
 		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 
-	/* PER */
+	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON ||
+			core_next_state < PWRDM_POWER_ON) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+
+	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
-		omap2_gpio_prepare_for_retention();
+		omap2_gpio_prepare_for_idle(per_next_state);
 		if (per_next_state == PWRDM_POWER_OFF) {
 			if (core_next_state == PWRDM_POWER_ON) {
 				per_next_state = PWRDM_POWER_RET;
@@ -397,10 +416,8 @@ void omap_sram_idle(void)
 			omap3_core_save_context();
 			omap3_prcm_save_context();
 		}
-		/* Enable IO-PAD and IO-CHAIN wakeups */
-		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
-		omap3_enable_io_chain();
 	}
+
 	omap3_intc_prepare_idle();
 
 	/*
@@ -444,7 +461,7 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(0);
 		omap_uart_resume_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF)
-			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
@@ -453,9 +470,9 @@ void omap_sram_idle(void)
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+		omap2_gpio_resume_after_idle();
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
-		omap2_gpio_resume_after_retention();
 		omap_uart_resume_idle(2);
 		if (per_state_modified)
 			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
@@ -463,7 +480,7 @@ void omap_sram_idle(void)
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (core_next_state < PWRDM_POWER_ON) {
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
 
@@ -547,20 +564,21 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds)
+static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
 {
 	u32 tick_rate, cycles;
 
-	if (!seconds)
+	if (!seconds && !milliseconds)
 		return;
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds;
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
 	omap_dm_timer_stop(gptimer_wakeup);
 	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
 
-	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
-		seconds, cycles, tick_rate);
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
 }
 
 static int omap3_pm_prepare(void)
@@ -574,8 +592,9 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
-	if (wakeup_timer_seconds)
-		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+	if (wakeup_timer_seconds || wakeup_timer_milliseconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
+					 wakeup_timer_milliseconds);
 
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
@@ -682,13 +701,13 @@ static void __init omap3_iva_idle(void)
 		return;
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
-			  OMAP3430_RST2_IVA2 |
-			  OMAP3430_RST3_IVA2,
-			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+			  OMAP3430_RST2_IVA2_MASK |
+			  OMAP3430_RST3_IVA2_MASK,
+			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	/* Enable IVA2 clock */
-	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 			 OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Set IVA2 boot mode to 'idle' */
@@ -696,16 +715,16 @@ static void __init omap3_iva_idle(void)
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
 
 	/* Un-reset IVA2 */
-	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	/* Disable IVA2 clock */
 	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
-			  OMAP3430_RST2_IVA2 |
-			  OMAP3430_RST3_IVA2,
-			  OMAP3430_IVA2_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+			  OMAP3430_RST2_IVA2_MASK |
+			  OMAP3430_RST3_IVA2_MASK,
+			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 }
 
 static void __init omap3_d2d_idle(void)
@@ -726,10 +745,10 @@ static void __init omap3_d2d_idle(void)
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 
 	/* reset modem */
-	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
-			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
-			  CORE_MOD, RM_RSTCTRL);
-	prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+			  CORE_MOD, OMAP2_RM_RSTCTRL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 }
 
 static void __init prcm_setup_regs(void)
@@ -753,102 +772,102 @@ static void __init prcm_setup_regs(void)
 	 * Note that in the long run this should be done by clockfw
 	 */
 	cm_write_mod_reg(
-		OMAP3430_AUTO_MODEM |
-		OMAP3430ES2_AUTO_MMC3 |
-		OMAP3430ES2_AUTO_ICR |
-		OMAP3430_AUTO_AES2 |
-		OMAP3430_AUTO_SHA12 |
-		OMAP3430_AUTO_DES2 |
-		OMAP3430_AUTO_MMC2 |
-		OMAP3430_AUTO_MMC1 |
-		OMAP3430_AUTO_MSPRO |
-		OMAP3430_AUTO_HDQ |
-		OMAP3430_AUTO_MCSPI4 |
-		OMAP3430_AUTO_MCSPI3 |
-		OMAP3430_AUTO_MCSPI2 |
-		OMAP3430_AUTO_MCSPI1 |
-		OMAP3430_AUTO_I2C3 |
-		OMAP3430_AUTO_I2C2 |
-		OMAP3430_AUTO_I2C1 |
-		OMAP3430_AUTO_UART2 |
-		OMAP3430_AUTO_UART1 |
-		OMAP3430_AUTO_GPT11 |
-		OMAP3430_AUTO_GPT10 |
-		OMAP3430_AUTO_MCBSP5 |
-		OMAP3430_AUTO_MCBSP1 |
-		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
-		OMAP3430_AUTO_MAILBOXES |
-		OMAP3430_AUTO_OMAPCTRL |
-		OMAP3430ES1_AUTO_FSHOSTUSB |
-		OMAP3430_AUTO_HSOTGUSB |
-		OMAP3430_AUTO_SAD2D |
-		OMAP3430_AUTO_SSI,
+		OMAP3430_AUTO_MODEM_MASK |
+		OMAP3430ES2_AUTO_MMC3_MASK |
+		OMAP3430ES2_AUTO_ICR_MASK |
+		OMAP3430_AUTO_AES2_MASK |
+		OMAP3430_AUTO_SHA12_MASK |
+		OMAP3430_AUTO_DES2_MASK |
+		OMAP3430_AUTO_MMC2_MASK |
+		OMAP3430_AUTO_MMC1_MASK |
+		OMAP3430_AUTO_MSPRO_MASK |
+		OMAP3430_AUTO_HDQ_MASK |
+		OMAP3430_AUTO_MCSPI4_MASK |
+		OMAP3430_AUTO_MCSPI3_MASK |
+		OMAP3430_AUTO_MCSPI2_MASK |
+		OMAP3430_AUTO_MCSPI1_MASK |
+		OMAP3430_AUTO_I2C3_MASK |
+		OMAP3430_AUTO_I2C2_MASK |
+		OMAP3430_AUTO_I2C1_MASK |
+		OMAP3430_AUTO_UART2_MASK |
+		OMAP3430_AUTO_UART1_MASK |
+		OMAP3430_AUTO_GPT11_MASK |
+		OMAP3430_AUTO_GPT10_MASK |
+		OMAP3430_AUTO_MCBSP5_MASK |
+		OMAP3430_AUTO_MCBSP1_MASK |
+		OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES_MASK |
+		OMAP3430_AUTO_OMAPCTRL_MASK |
+		OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
+		OMAP3430_AUTO_HSOTGUSB_MASK |
+		OMAP3430_AUTO_SAD2D_MASK |
+		OMAP3430_AUTO_SSI_MASK,
 		CORE_MOD, CM_AUTOIDLE1);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_PKA |
-		OMAP3430_AUTO_AES1 |
-		OMAP3430_AUTO_RNG |
-		OMAP3430_AUTO_SHA11 |
-		OMAP3430_AUTO_DES1,
+		OMAP3430_AUTO_PKA_MASK |
+		OMAP3430_AUTO_AES1_MASK |
+		OMAP3430_AUTO_RNG_MASK |
+		OMAP3430_AUTO_SHA11_MASK |
+		OMAP3430_AUTO_DES1_MASK,
 		CORE_MOD, CM_AUTOIDLE2);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
 		cm_write_mod_reg(
-			OMAP3430_AUTO_MAD2D |
-			OMAP3430ES2_AUTO_USBTLL,
+			OMAP3430_AUTO_MAD2D_MASK |
+			OMAP3430ES2_AUTO_USBTLL_MASK,
 			CORE_MOD, CM_AUTOIDLE3);
 	}
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_WDT2 |
-		OMAP3430_AUTO_WDT1 |
-		OMAP3430_AUTO_GPIO1 |
-		OMAP3430_AUTO_32KSYNC |
-		OMAP3430_AUTO_GPT12 |
-		OMAP3430_AUTO_GPT1 ,
+		OMAP3430_AUTO_WDT2_MASK |
+		OMAP3430_AUTO_WDT1_MASK |
+		OMAP3430_AUTO_GPIO1_MASK |
+		OMAP3430_AUTO_32KSYNC_MASK |
+		OMAP3430_AUTO_GPT12_MASK |
+		OMAP3430_AUTO_GPT1_MASK,
 		WKUP_MOD, CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_DSS,
+		OMAP3430_AUTO_DSS_MASK,
 		OMAP3430_DSS_MOD,
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_CAM,
+		OMAP3430_AUTO_CAM_MASK,
 		OMAP3430_CAM_MOD,
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_GPIO6 |
-		OMAP3430_AUTO_GPIO5 |
-		OMAP3430_AUTO_GPIO4 |
-		OMAP3430_AUTO_GPIO3 |
-		OMAP3430_AUTO_GPIO2 |
-		OMAP3430_AUTO_WDT3 |
-		OMAP3430_AUTO_UART3 |
-		OMAP3430_AUTO_GPT9 |
-		OMAP3430_AUTO_GPT8 |
-		OMAP3430_AUTO_GPT7 |
-		OMAP3430_AUTO_GPT6 |
-		OMAP3430_AUTO_GPT5 |
-		OMAP3430_AUTO_GPT4 |
-		OMAP3430_AUTO_GPT3 |
-		OMAP3430_AUTO_GPT2 |
-		OMAP3430_AUTO_MCBSP4 |
-		OMAP3430_AUTO_MCBSP3 |
-		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_AUTO_GPIO6_MASK |
+		OMAP3430_AUTO_GPIO5_MASK |
+		OMAP3430_AUTO_GPIO4_MASK |
+		OMAP3430_AUTO_GPIO3_MASK |
+		OMAP3430_AUTO_GPIO2_MASK |
+		OMAP3430_AUTO_WDT3_MASK |
+		OMAP3430_AUTO_UART3_MASK |
+		OMAP3430_AUTO_GPT9_MASK |
+		OMAP3430_AUTO_GPT8_MASK |
+		OMAP3430_AUTO_GPT7_MASK |
+		OMAP3430_AUTO_GPT6_MASK |
+		OMAP3430_AUTO_GPT5_MASK |
+		OMAP3430_AUTO_GPT4_MASK |
+		OMAP3430_AUTO_GPT3_MASK |
+		OMAP3430_AUTO_GPT2_MASK |
+		OMAP3430_AUTO_MCBSP4_MASK |
+		OMAP3430_AUTO_MCBSP3_MASK |
+		OMAP3430_AUTO_MCBSP2_MASK,
 		OMAP3430_PER_MOD,
 		CM_AUTOIDLE);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
 		cm_write_mod_reg(
-			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_AUTO_USBHOST_MASK,
 			OMAP3430ES2_USBHOST_MOD,
 			CM_AUTOIDLE);
 	}
 
-	omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	/*
 	 * Set all plls to autoidle. This is needed until autoidle is
@@ -878,35 +897,40 @@ static void __init prcm_setup_regs(void)
 			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 
 	/* setup wakup source */
-	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
-			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+	prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
 			  WKUP_MOD, PM_WKEN);
 	/* No need to write EN_IO, that is always enabled */
-	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
-			  OMAP3430_EN_GPT12,
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+			  OMAP3430_GRPSEL_GPT1_MASK |
+			  OMAP3430_GRPSEL_GPT12_MASK,
 			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
 	/* For some reason IO doesn't generate wakeup event even if
 	 * it is selected to mpu wakeup goup */
-	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+	prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
 	/* Enable PM_WKEN to support DSS LPR */
-	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
-			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
-			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
-			  OMAP3430_EN_MCBSP4,
+	prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
+			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
+			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
+			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
-			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
-			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
-			  OMAP3430_EN_MCBSP4,
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+			  OMAP3430_GRPSEL_GPIO3_MASK |
+			  OMAP3430_GRPSEL_GPIO4_MASK |
+			  OMAP3430_GRPSEL_GPIO5_MASK |
+			  OMAP3430_GRPSEL_GPIO6_MASK |
+			  OMAP3430_GRPSEL_UART3_MASK |
+			  OMAP3430_GRPSEL_MCBSP2_MASK |
+			  OMAP3430_GRPSEL_MCBSP3_MASK |
+			  OMAP3430_GRPSEL_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
@@ -916,13 +940,13 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
 
 	/* Clear any pending 'reset' flags */
-	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
 
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
@@ -941,6 +965,10 @@ void omap3_pm_off_mode_enable(int enable)
 	else
 		state = PWRDM_POWER_RET;
 
+#ifdef CONFIG_CPU_IDLE
+	omap3_cpuidle_update_states();
+#endif
+
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		pwrst->next_state = state;
 		set_pwrdm_state(pwrst->pwrdm, state);
@@ -998,6 +1026,9 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
+	clkdm_clear_all_wkdeps(clkdm);
+	clkdm_clear_all_sleepdeps(clkdm);
+
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
@@ -1018,6 +1049,7 @@ void omap_push_sram_idle(void)
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
+	struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
 	int ret;
 
 	if (!cpu_is_omap34xx())
@@ -1057,6 +1089,11 @@ static int __init omap3_pm_init(void)
 	core_pwrdm = pwrdm_lookup("core_pwrdm");
 	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
+	neon_clkdm = clkdm_lookup("neon_clkdm");
+	mpu_clkdm = clkdm_lookup("mpu_clkdm");
+	per_clkdm = clkdm_lookup("per_clkdm");
+	core_clkdm = clkdm_lookup("core_clkdm");
+
 	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
@@ -1065,15 +1102,7 @@ static int __init omap3_pm_init(void)
 	pm_idle = omap3_pm_idle;
 	omap3_idle_init();
 
-	pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
-	/*
-	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
-	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
-	 * waking up PER with every CORE wakeup - see
-	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
-	*/
-	pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
-
+	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 26b3f3e..a2904aa 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -2,9 +2,11 @@
  * OMAP powerdomain control
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
+ * State counting code by Tero Kristo <tero.kristo@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -26,12 +28,15 @@
 
 #include "cm.h"
 #include "cm-regbits-34xx.h"
+#include "cm-regbits-44xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
 
 #include <plat/cpu.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/prcm.h>
 
 #include "pm.h"
 
@@ -40,28 +45,42 @@ enum {
 	PWRDM_STATE_PREV,
 };
 
-/* pwrdm_list contains all registered struct powerdomains */
-static LIST_HEAD(pwrdm_list);
-
-/*
- * pwrdm_rwlock protects pwrdm_list add and del ops - also reused to
- * protect pwrdm_clkdms[] during clkdm add/del ops
- */
-static DEFINE_RWLOCK(pwrdm_rwlock);
+/* Variable holding value of the CPU dependent PWRSTCTRL Register Offset */
+static u16 pwrstctrl_reg_offs;
 
+/* Variable holding value of the CPU dependent PWRSTST Register Offset */
+static u16 pwrstst_reg_offs;
 
-/* Private functions */
+/* OMAP3 and OMAP4 specific register bit initialisations
+ * Notice that the names here are not according to each power
+ * domain but the bit mapping used applies to all of them
+ */
 
-static u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	u32 v;
+/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
+#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
+#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
+#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
+#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
+#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
+#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
+#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
+#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
+#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
+#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Status bits */
+#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
+#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
+#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
+#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
+#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
 
-	v = prm_read_mod_reg(domain, idx);
-	v &= mask;
-	v >>= __ffs(mask);
+/* pwrdm_list contains all registered struct powerdomains */
+static LIST_HEAD(pwrdm_list);
 
-	return v;
-}
+/* Private functions */
 
 static struct powerdomain *_pwrdm_lookup(const char *name)
 {
@@ -79,32 +98,63 @@ static struct powerdomain *_pwrdm_lookup(const char *name)
 	return pwrdm;
 }
 
-/* _pwrdm_deps_lookup - look up the specified powerdomain in a pwrdm list */
-static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
-					      struct pwrdm_dep *deps)
+/**
+ * _pwrdm_register - register a powerdomain
+ * @pwrdm: struct powerdomain * to register
+ *
+ * Adds a powerdomain to the internal powerdomain list.  Returns
+ * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
+ * already registered by the provided name, or 0 upon success.
+ */
+static int _pwrdm_register(struct powerdomain *pwrdm)
 {
-	struct pwrdm_dep *pd;
+	int i;
 
-	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
-		return ERR_PTR(-EINVAL);
+	if (!pwrdm)
+		return -EINVAL;
 
-	for (pd = deps; pd->pwrdm_name; pd++) {
+	if (!omap_chip_is(pwrdm->omap_chip))
+		return -EINVAL;
 
-		if (!omap_chip_is(pd->omap_chip))
-			continue;
+	if (_pwrdm_lookup(pwrdm->name))
+		return -EEXIST;
 
-		if (!pd->pwrdm && pd->pwrdm_name)
-			pd->pwrdm = pwrdm_lookup(pd->pwrdm_name);
+	list_add(&pwrdm->node, &pwrdm_list);
 
-		if (pd->pwrdm == pwrdm)
-			break;
+	/* Initialize the powerdomain's state counter */
+	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
+		pwrdm->state_counter[i] = 0;
 
-	}
+	pwrdm->ret_logic_off_counter = 0;
+	for (i = 0; i < pwrdm->banks; i++)
+		pwrdm->ret_mem_off_counter[i] = 0;
+
+	pwrdm_wait_transition(pwrdm);
+	pwrdm->state = pwrdm_read_pwrst(pwrdm);
+	pwrdm->state_counter[pwrdm->state] = 1;
+
+	pr_debug("powerdomain: registered %s\n", pwrdm->name);
+
+	return 0;
+}
+
+static void _update_logic_membank_counters(struct powerdomain *pwrdm)
+{
+	int i;
+	u8 prev_logic_pwrst, prev_mem_pwrst;
 
-	if (!pd->pwrdm_name)
-		return ERR_PTR(-ENOENT);
+	prev_logic_pwrst = pwrdm_read_prev_logic_pwrst(pwrdm);
+	if ((pwrdm->pwrsts_logic_ret == PWRSTS_OFF_RET) &&
+	    (prev_logic_pwrst == PWRDM_POWER_OFF))
+		pwrdm->ret_logic_off_counter++;
 
-	return pd->pwrdm;
+	for (i = 0; i < pwrdm->banks; i++) {
+		prev_mem_pwrst = pwrdm_read_prev_mem_pwrst(pwrdm, i);
+
+		if ((pwrdm->pwrsts_mem_ret[i] == PWRSTS_OFF_RET) &&
+		    (prev_mem_pwrst == PWRDM_POWER_OFF))
+			pwrdm->ret_mem_off_counter[i]++;
+	}
 }
 
 static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
@@ -126,6 +176,8 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 		prev = pwrdm_read_prev_pwrst(pwrdm);
 		if (pwrdm->state != prev)
 			pwrdm->state_counter[prev]++;
+		if (prev == PWRDM_POWER_RET)
+			_update_logic_membank_counters(pwrdm);
 		break;
 	default:
 		return -EINVAL;
@@ -154,134 +206,71 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 	return 0;
 }
 
-static __init void _pwrdm_setup(struct powerdomain *pwrdm)
-{
-	int i;
-
-	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
-		pwrdm->state_counter[i] = 0;
-
-	pwrdm_wait_transition(pwrdm);
-	pwrdm->state = pwrdm_read_pwrst(pwrdm);
-	pwrdm->state_counter[pwrdm->state] = 1;
-
-}
-
 /* Public functions */
 
 /**
  * pwrdm_init - set up the powerdomain layer
+ * @pwrdm_list: array of struct powerdomain pointers to register
  *
- * Loop through the list of powerdomains, registering all that are
- * available on the current CPU. If pwrdm_list is supplied and not
- * null, all of the referenced powerdomains will be registered.  No
- * return value.
+ * Loop through the array of powerdomains @pwrdm_list, registering all
+ * that are available on the current CPU. If pwrdm_list is supplied
+ * and not null, all of the referenced powerdomains will be
+ * registered.  No return value.  XXX pwrdm_list is not really a
+ * "list"; it is an array.  Rename appropriately.
  */
 void pwrdm_init(struct powerdomain **pwrdm_list)
 {
 	struct powerdomain **p = NULL;
 
-	if (pwrdm_list) {
-		for (p = pwrdm_list; *p; p++) {
-			pwrdm_register(*p);
-			_pwrdm_setup(*p);
-		}
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
+		pwrstst_reg_offs = OMAP2_PM_PWSTST;
+	} else if (cpu_is_omap44xx()) {
+		pwrstctrl_reg_offs = OMAP4_PM_PWSTCTRL;
+		pwrstst_reg_offs = OMAP4_PM_PWSTST;
+	} else {
+		printk(KERN_ERR "Power Domain struct not supported for " \
+							"this CPU\n");
+		return;
 	}
-}
-
-/**
- * pwrdm_register - register a powerdomain
- * @pwrdm: struct powerdomain * to register
- *
- * Adds a powerdomain to the internal powerdomain list.  Returns
- * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
- * already registered by the provided name, or 0 upon success.
- */
-int pwrdm_register(struct powerdomain *pwrdm)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (!omap_chip_is(pwrdm->omap_chip))
-		return -EINVAL;
 
-	write_lock_irqsave(&pwrdm_rwlock, flags);
-	if (_pwrdm_lookup(pwrdm->name)) {
-		ret = -EEXIST;
-		goto pr_unlock;
+	if (pwrdm_list) {
+		for (p = pwrdm_list; *p; p++)
+			_pwrdm_register(*p);
 	}
-
-	list_add(&pwrdm->node, &pwrdm_list);
-
-	pr_debug("powerdomain: registered %s\n", pwrdm->name);
-	ret = 0;
-
-pr_unlock:
-	write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
-	return ret;
-}
-
-/**
- * pwrdm_unregister - unregister a powerdomain
- * @pwrdm: struct powerdomain * to unregister
- *
- * Removes a powerdomain from the internal powerdomain list.  Returns
- * -EINVAL if pwrdm argument is NULL.
- */
-int pwrdm_unregister(struct powerdomain *pwrdm)
-{
-	unsigned long flags;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	write_lock_irqsave(&pwrdm_rwlock, flags);
-	list_del(&pwrdm->node);
-	write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
-	pr_debug("powerdomain: unregistered %s\n", pwrdm->name);
-
-	return 0;
 }
 
 /**
  * pwrdm_lookup - look up a powerdomain by name, return a pointer
  * @name: name of powerdomain
  *
- * Find a registered powerdomain by its name.  Returns a pointer to the
- * struct powerdomain if found, or NULL otherwise.
+ * Find a registered powerdomain by its name @name.  Returns a pointer
+ * to the struct powerdomain if found, or NULL otherwise.
  */
 struct powerdomain *pwrdm_lookup(const char *name)
 {
 	struct powerdomain *pwrdm;
-	unsigned long flags;
 
 	if (!name)
 		return NULL;
 
-	read_lock_irqsave(&pwrdm_rwlock, flags);
 	pwrdm = _pwrdm_lookup(name);
-	read_unlock_irqrestore(&pwrdm_rwlock, flags);
 
 	return pwrdm;
 }
 
 /**
- * pwrdm_for_each_nolock - call function on each registered clockdomain
+ * pwrdm_for_each - call function on each registered clockdomain
  * @fn: callback function *
  *
- * Call the supplied function for each registered powerdomain.  The
- * callback function can return anything but 0 to bail out early from
- * the iterator.  Returns the last return value of the callback function, which
- * should be 0 for success or anything else to indicate failure; or -EINVAL if
- * the function pointer is null.
+ * Call the supplied function @fn for each registered powerdomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator.  Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
  */
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
-				void *user)
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+		   void *user)
 {
 	struct powerdomain *temp_pwrdm;
 	int ret = 0;
@@ -299,40 +288,17 @@ int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
 }
 
 /**
- * pwrdm_for_each - call function on each registered clockdomain
- * @fn: callback function *
- *
- * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
- * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware powerdomain
- * control functions are fine.
- */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user)
-{
-	unsigned long flags;
-	int ret;
-
-	read_lock_irqsave(&pwrdm_rwlock, flags);
-	ret = pwrdm_for_each_nolock(fn, user);
-	read_unlock_irqrestore(&pwrdm_rwlock, flags);
-
-	return ret;
-}
-
-/**
  * pwrdm_add_clkdm - add a clockdomain to a powerdomain
  * @pwrdm: struct powerdomain * to add the clockdomain to
  * @clkdm: struct clockdomain * to associate with a powerdomain
  *
- * Associate the clockdomain 'clkdm' with a powerdomain 'pwrdm'.  This
+ * Associate the clockdomain @clkdm with a powerdomain @pwrdm.  This
  * enables the use of pwrdm_for_each_clkdm().  Returns -EINVAL if
  * presented with invalid pointers; -ENOMEM if memory could not be allocated;
  * or 0 upon success.
  */
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 {
-	unsigned long flags;
 	int i;
 	int ret = -EINVAL;
 
@@ -342,8 +308,6 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	pr_debug("powerdomain: associating clockdomain %s with powerdomain "
 		 "%s\n", clkdm->name, pwrdm->name);
 
-	write_lock_irqsave(&pwrdm_rwlock, flags);
-
 	for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
 		if (!pwrdm->pwrdm_clkdms[i])
 			break;
@@ -368,8 +332,6 @@ int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	ret = 0;
 
 pac_exit:
-	write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
 	return ret;
 }
 
@@ -378,14 +340,13 @@ pac_exit:
  * @pwrdm: struct powerdomain * to add the clockdomain to
  * @clkdm: struct clockdomain * to associate with a powerdomain
  *
- * Dissociate the clockdomain 'clkdm' from the powerdomain
- * 'pwrdm'. Returns -EINVAL if presented with invalid pointers;
- * -ENOENT if the clkdm was not associated with the powerdomain, or 0
- * upon success.
+ * Dissociate the clockdomain @clkdm from the powerdomain
+ * @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT
+ * if @clkdm was not associated with the powerdomain, or 0 upon
+ * success.
  */
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 {
-	unsigned long flags;
 	int ret = -EINVAL;
 	int i;
 
@@ -395,8 +356,6 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
 		 "%s\n", clkdm->name, pwrdm->name);
 
-	write_lock_irqsave(&pwrdm_rwlock, flags);
-
 	for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
 		if (pwrdm->pwrdm_clkdms[i] == clkdm)
 			break;
@@ -413,8 +372,6 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
 	ret = 0;
 
 pdc_exit:
-	write_unlock_irqrestore(&pwrdm_rwlock, flags);
-
 	return ret;
 }
 
@@ -423,259 +380,34 @@ pdc_exit:
  * @pwrdm: struct powerdomain * to iterate over
  * @fn: callback function *
  *
- * Call the supplied function for each clockdomain in the powerdomain
- * 'pwrdm'.  The callback function can return anything but 0 to bail
- * out early from the iterator.  The callback function is called with
- * the pwrdm_rwlock held for reading, so no powerdomain structure
- * manipulation functions should be called from the callback, although
- * hardware powerdomain control functions are fine.  Returns -EINVAL
- * if presented with invalid pointers; or passes along the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure.
+ * Call the supplied function @fn for each clockdomain in the powerdomain
+ * @pwrdm.  The callback function can return anything but 0 to bail
+ * out early from the iterator.  Returns -EINVAL if presented with
+ * invalid pointers; or passes along the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure.
  */
 int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
 			 int (*fn)(struct powerdomain *pwrdm,
 				   struct clockdomain *clkdm))
 {
-	unsigned long flags;
 	int ret = 0;
 	int i;
 
 	if (!fn)
 		return -EINVAL;
 
-	read_lock_irqsave(&pwrdm_rwlock, flags);
-
 	for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
 		ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
 
-	read_unlock_irqrestore(&pwrdm_rwlock, flags);
-
 	return ret;
 }
 
-
-/**
- * pwrdm_add_wkdep - add a wakeup dependency from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * When the powerdomain represented by pwrdm2 wakes up (due to an
- * interrupt), wake up pwrdm1.	Implemented in hardware on the OMAP,
- * this feature is designed to reduce wakeup latency of the dependent
- * powerdomain.  Returns -EINVAL if presented with invalid powerdomain
- * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
- * 0 upon success.
- */
-int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
-		 pwrdm1->name, pwrdm2->name);
-
-	prm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
-			     pwrdm1->prcm_offs, PM_WKDEP);
-
-	return 0;
-}
-
-/**
- * pwrdm_del_wkdep - remove a wakeup dependency from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * Remove a wakeup dependency that causes pwrdm1 to wake up when pwrdm2
- * wakes up.  Returns -EINVAL if presented with invalid powerdomain
- * pointers, -ENOENT if pwrdm2 cannot wake up pwrdm1 in hardware, or
- * 0 upon success.
- */
-int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	pr_debug("powerdomain: hardware will no longer wake up %s after %s "
-		 "wakes up\n", pwrdm1->name, pwrdm2->name);
-
-	prm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
-			       pwrdm1->prcm_offs, PM_WKDEP);
-
-	return 0;
-}
-
-/**
- * pwrdm_read_wkdep - read wakeup dependency state from pwrdm2 to pwrdm1
- * @pwrdm1: wake this struct powerdomain * up (dependent)
- * @pwrdm2: when this struct powerdomain * wakes up (source)
- *
- * Return 1 if a hardware wakeup dependency exists wherein pwrdm1 will be
- * awoken when pwrdm2 wakes up; 0 if dependency is not set; -EINVAL
- * if either powerdomain pointer is invalid; or -ENOENT if the hardware
- * is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * wakeup dependencies.  Wakeup dependencies fixed in hardware are not
- * yet handled here.
- */
-int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->wkdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
-					(1 << pwrdm2->dep_bit));
-}
-
-/**
- * pwrdm_add_sleepdep - add a sleep dependency from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Prevent pwrdm1 from automatically going inactive (and then to
- * retention or off) if pwrdm2 is still active.	 Returns -EINVAL if
- * presented with invalid powerdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep dependencies,
- * -ENOENT if the specified dependency cannot be set in hardware, or
- * 0 upon success.
- */
-int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!cpu_is_omap34xx())
-		return -EINVAL;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", pwrdm1->name,
-			 pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
-		 pwrdm1->name, pwrdm2->name);
-
-	cm_set_mod_reg_bits((1 << pwrdm2->dep_bit),
-			    pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
-
-	return 0;
-}
-
-/**
- * pwrdm_del_sleepdep - remove a sleep dependency from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Allow pwrdm1 to automatically go inactive (and then to retention or
- * off), independent of the activity state of pwrdm2.  Returns -EINVAL
- * if presented with invalid powerdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep dependencies,
- * -ENOENT if the specified dependency cannot be cleared in hardware, or
- * 0 upon success.
- */
-int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!cpu_is_omap34xx())
-		return -EINVAL;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", pwrdm1->name,
-			 pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	pr_debug("powerdomain: will no longer prevent %s from sleeping if "
-		 "%s is active\n", pwrdm1->name, pwrdm2->name);
-
-	cm_clear_mod_reg_bits((1 << pwrdm2->dep_bit),
-			      pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP);
-
-	return 0;
-}
-
-/**
- * pwrdm_read_sleepdep - read sleep dependency state from pwrdm2 to pwrdm1
- * @pwrdm1: prevent this struct powerdomain * from sleeping (dependent)
- * @pwrdm2: when this struct powerdomain * is active (source)
- *
- * Return 1 if a hardware sleep dependency exists wherein pwrdm1 will
- * not be allowed to automatically go inactive if pwrdm2 is active;
- * 0 if pwrdm1's automatic power state inactivity transition is independent
- * of pwrdm2's; -EINVAL if either powerdomain pointer is invalid or called
- * on a machine that does not support software-configurable hardware sleep
- * dependencies; or -ENOENT if the hardware is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * sleep dependencies.	Sleep dependencies fixed in hardware are not
- * yet handled here.
- */
-int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
-{
-	struct powerdomain *p;
-
-	if (!cpu_is_omap34xx())
-		return -EINVAL;
-
-	if (!pwrdm1)
-		return -EINVAL;
-
-	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
-	if (IS_ERR(p)) {
-		pr_debug("powerdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", pwrdm1->name,
-			 pwrdm2->name);
-		return PTR_ERR(p);
-	}
-
-	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
-					(1 << pwrdm2->dep_bit));
-}
-
 /**
  * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
  * @pwrdm: struct powerdomain *
  *
- * Return the number of controllable memory banks in powerdomain pwrdm,
+ * Return the number of controllable memory banks in powerdomain @pwrdm,
  * starting with 1.  Returns -EINVAL if the powerdomain pointer is null.
  */
 int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
@@ -691,7 +423,7 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
  * @pwrdm: struct powerdomain * to set
  * @pwrst: one of the PWRDM_POWER_* macros
  *
- * Set the powerdomain pwrdm's next power state to pwrst.  The powerdomain
+ * Set the powerdomain @pwrdm's next power state to @pwrst.  The powerdomain
  * may not enter this state immediately if the preconditions for this state
  * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
  * null or if the power state is invalid for the powerdomin, or returns 0
@@ -710,7 +442,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 
 	prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
 			     (pwrst << OMAP_POWERSTATE_SHIFT),
-			     pwrdm->prcm_offs, PM_PWSTCTRL);
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -719,7 +451,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
  * pwrdm_read_next_pwrst - get next powerdomain power state
  * @pwrdm: struct powerdomain * to get power state
  *
- * Return the powerdomain pwrdm's next power state.  Returns -EINVAL
+ * Return the powerdomain @pwrdm's next power state.  Returns -EINVAL
  * if the powerdomain pointer is null or returns the next power state
  * upon success.
  */
@@ -728,15 +460,15 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTCTRL,
-					OMAP_POWERSTATE_MASK);
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+				 pwrstctrl_reg_offs, OMAP_POWERSTATE_MASK);
 }
 
 /**
  * pwrdm_read_pwrst - get current powerdomain power state
  * @pwrdm: struct powerdomain * to get power state
  *
- * Return the powerdomain pwrdm's current power state.	Returns -EINVAL
+ * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
  * if the powerdomain pointer is null or returns the current power state
  * upon success.
  */
@@ -745,15 +477,15 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
-					OMAP_POWERSTATEST_MASK);
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+				 pwrstst_reg_offs, OMAP_POWERSTATEST_MASK);
 }
 
 /**
  * pwrdm_read_prev_pwrst - get previous powerdomain power state
  * @pwrdm: struct powerdomain * to get previous power state
  *
- * Return the powerdomain pwrdm's previous power state.  Returns -EINVAL
+ * Return the powerdomain @pwrdm's previous power state.  Returns -EINVAL
  * if the powerdomain pointer is null or returns the previous power state
  * upon success.
  */
@@ -771,14 +503,16 @@ int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
  * @pwrdm: struct powerdomain * to set
  * @pwrst: one of the PWRDM_POWER_* macros
  *
- * Set the next power state that the logic portion of the powerdomain
- * pwrdm will enter when the powerdomain enters retention.  This will
- * be either RETENTION or OFF, if supported.  Returns -EINVAL if the
- * powerdomain pointer is null or the target power state is not not
- * supported, or returns 0 upon success.
+ * Set the next power state @pwrst that the logic portion of the
+ * powerdomain @pwrdm will enter when the powerdomain enters retention.
+ * This will be either RETENTION or OFF, if supported.  Returns
+ * -EINVAL if the powerdomain pointer is null or the target power
+ * state is not not supported, or returns 0 upon success.
  */
 int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 {
+	u32 v;
+
 	if (!pwrdm)
 		return -EINVAL;
 
@@ -794,9 +528,9 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 	 * but the type of value returned is the same for each
 	 * powerdomain.
 	 */
-	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
-			     (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
-			     pwrdm->prcm_offs, PM_PWSTCTRL);
+	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
+	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -807,13 +541,14 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
  * @bank: memory bank number to set (0-3)
  * @pwrst: one of the PWRDM_POWER_* macros
  *
- * Set the next power state that memory bank x of the powerdomain
- * pwrdm will enter when the powerdomain enters the ON state.  Bank
- * will be a number from 0 to 3, and represents different types of
- * memory, depending on the powerdomain.  Returns -EINVAL if the
- * powerdomain pointer is null or the target power state is not not
- * supported for this memory bank, -EEXIST if the target memory bank
- * does not exist or is not controllable, or returns 0 upon success.
+ * Set the next power state @pwrst that memory bank @bank of the
+ * powerdomain @pwrdm will enter when the powerdomain enters the ON
+ * state.  @bank will be a number from 0 to 3, and represents different
+ * types of memory, depending on the powerdomain.  Returns -EINVAL if
+ * the powerdomain pointer is null or the target power state is not
+ * not supported for this memory bank, -EEXIST if the target memory
+ * bank does not exist or is not controllable, or returns 0 upon
+ * success.
  */
 int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 {
@@ -839,16 +574,19 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	 */
 	switch (bank) {
 	case 0:
-		m = OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK;
+		m = OMAP_MEM0_ONSTATE_MASK;
 		break;
 	case 1:
-		m = OMAP3430_L1FLATMEMONSTATE_MASK;
+		m = OMAP_MEM1_ONSTATE_MASK;
 		break;
 	case 2:
-		m = OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK;
+		m = OMAP_MEM2_ONSTATE_MASK;
 		break;
 	case 3:
-		m = OMAP3430_L2FLATMEMONSTATE_MASK;
+		m = OMAP_MEM3_ONSTATE_MASK;
+		break;
+	case 4:
+		m = OMAP_MEM4_ONSTATE_MASK;
 		break;
 	default:
 		WARN_ON(1); /* should never happen */
@@ -856,7 +594,7 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	}
 
 	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
-			     pwrdm->prcm_offs, PM_PWSTCTRL);
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -867,14 +605,15 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
  * @bank: memory bank number to set (0-3)
  * @pwrst: one of the PWRDM_POWER_* macros
  *
- * Set the next power state that memory bank x of the powerdomain
- * pwrdm will enter when the powerdomain enters the RETENTION state.
- * Bank will be a number from 0 to 3, and represents different types
- * of memory, depending on the powerdomain.  pwrst will be either
- * RETENTION or OFF, if supported. Returns -EINVAL if the powerdomain
- * pointer is null or the target power state is not not supported for
- * this memory bank, -EEXIST if the target memory bank does not exist
- * or is not controllable, or returns 0 upon success.
+ * Set the next power state @pwrst that memory bank @bank of the
+ * powerdomain @pwrdm will enter when the powerdomain enters the
+ * RETENTION state.  Bank will be a number from 0 to 3, and represents
+ * different types of memory, depending on the powerdomain.  @pwrst
+ * will be either RETENTION or OFF, if supported.  Returns -EINVAL if
+ * the powerdomain pointer is null or the target power state is not
+ * not supported for this memory bank, -EEXIST if the target memory
+ * bank does not exist or is not controllable, or returns 0 upon
+ * success.
  */
 int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 {
@@ -900,16 +639,19 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	 */
 	switch (bank) {
 	case 0:
-		m = OMAP3430_SHAREDL1CACHEFLATRETSTATE;
+		m = OMAP_MEM0_RETSTATE_MASK;
 		break;
 	case 1:
-		m = OMAP3430_L1FLATMEMRETSTATE;
+		m = OMAP_MEM1_RETSTATE_MASK;
 		break;
 	case 2:
-		m = OMAP3430_SHAREDL2CACHEFLATRETSTATE;
+		m = OMAP_MEM2_RETSTATE_MASK;
 		break;
 	case 3:
-		m = OMAP3430_L2FLATMEMRETSTATE;
+		m = OMAP_MEM3_RETSTATE_MASK;
+		break;
+	case 4:
+		m = OMAP_MEM4_RETSTATE_MASK;
 		break;
 	default:
 		WARN_ON(1); /* should never happen */
@@ -917,7 +659,7 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	}
 
 	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-			     PM_PWSTCTRL);
+			     pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -926,27 +668,27 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
  * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
  * @pwrdm: struct powerdomain * to get current logic retention power state
  *
- * Return the current power state that the logic portion of
- * powerdomain pwrdm will enter
- * Returns -EINVAL if the powerdomain pointer is null or returns the
- * current logic retention power state upon success.
+ * Return the power state that the logic portion of powerdomain @pwrdm
+ * will enter when the powerdomain enters retention.  Returns -EINVAL
+ * if the powerdomain pointer is null or returns the logic retention
+ * power state upon success.
  */
 int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
 {
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST,
-					OMAP3430_LOGICSTATEST);
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
+				       OMAP3430_LOGICSTATEST_MASK);
 }
 
 /**
  * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
  * @pwrdm: struct powerdomain * to get previous logic power state
  *
- * Return the powerdomain pwrdm's logic power state.  Returns -EINVAL
- * if the powerdomain pointer is null or returns the previous logic
- * power state upon success.
+ * Return the powerdomain @pwrdm's previous logic power state.  Returns
+ * -EINVAL if the powerdomain pointer is null or returns the previous
+ * logic power state upon success.
  */
 int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
 {
@@ -960,7 +702,30 @@ int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
 	 * powerdomain.
 	 */
 	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
-					OMAP3430_LASTLOGICSTATEENTERED);
+					OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+/**
+ * pwrdm_read_logic_retst - get next powerdomain logic power state
+ * @pwrdm: struct powerdomain * to get next logic power state
+ *
+ * Return the powerdomain pwrdm's logic power state.  Returns -EINVAL
+ * if the powerdomain pointer is null or returns the next logic
+ * power state upon success.
+ */
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
+				       OMAP3430_LOGICSTATEST_MASK);
 }
 
 /**
@@ -968,8 +733,8 @@ int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
  * @pwrdm: struct powerdomain * to get current memory bank power state
  * @bank: memory bank number (0-3)
  *
- * Return the powerdomain pwrdm's current memory power state for bank
- * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * Return the powerdomain @pwrdm's current memory power state for bank
+ * @bank.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
  * the target memory bank does not exist or is not controllable, or
  * returns the current memory power state upon success.
  */
@@ -994,23 +759,27 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 	 */
 	switch (bank) {
 	case 0:
-		m = OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK;
+		m = OMAP_MEM0_STATEST_MASK;
 		break;
 	case 1:
-		m = OMAP3430_L1FLATMEMSTATEST_MASK;
+		m = OMAP_MEM1_STATEST_MASK;
 		break;
 	case 2:
-		m = OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK;
+		m = OMAP_MEM2_STATEST_MASK;
 		break;
 	case 3:
-		m = OMAP3430_L2FLATMEMSTATEST_MASK;
+		m = OMAP_MEM3_STATEST_MASK;
+		break;
+	case 4:
+		m = OMAP_MEM4_STATEST_MASK;
 		break;
 	default:
 		WARN_ON(1); /* should never happen */
 		return -EEXIST;
 	}
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, PM_PWSTST, m);
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					 pwrstst_reg_offs, m);
 }
 
 /**
@@ -1018,10 +787,11 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
  * @pwrdm: struct powerdomain * to get previous memory bank power state
  * @bank: memory bank number (0-3)
  *
- * Return the powerdomain pwrdm's previous memory power state for bank
- * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
- * the target memory bank does not exist or is not controllable, or
- * returns the previous memory power state upon success.
+ * Return the powerdomain @pwrdm's previous memory power state for
+ * bank @bank.  Returns -EINVAL if the powerdomain pointer is null,
+ * -EEXIST if the target memory bank does not exist or is not
+ * controllable, or returns the previous memory power state upon
+ * success.
  */
 int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 {
@@ -1065,13 +835,63 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 }
 
 /**
+ * pwrdm_read_mem_retst - get next memory bank power state
+ * @pwrdm: struct powerdomain * to get mext memory bank power state
+ * @bank: memory bank number (0-3)
+ *
+ * Return the powerdomain pwrdm's next memory power state for bank
+ * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
+ * the target memory bank does not exist or is not controllable, or
+ * returns the next memory power state upon success.
+ */
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (pwrdm->banks < (bank + 1))
+		return -EEXIST;
+
+	/*
+	 * The register bit names below may not correspond to the
+	 * actual names of the bits in each powerdomain's register,
+	 * but the type of value returned is the same for each
+	 * powerdomain.
+	 */
+	switch (bank) {
+	case 0:
+		m = OMAP_MEM0_RETSTATE_MASK;
+		break;
+	case 1:
+		m = OMAP_MEM1_RETSTATE_MASK;
+		break;
+	case 2:
+		m = OMAP_MEM2_RETSTATE_MASK;
+		break;
+	case 3:
+		m = OMAP_MEM3_RETSTATE_MASK;
+		break;
+	case 4:
+		m = OMAP_MEM4_RETSTATE_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					pwrstctrl_reg_offs, m);
+}
+
+/**
  * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
  * @pwrdm: struct powerdomain * to clear
  *
- * Clear the powerdomain's previous power state register.  Clears the
- * entire register, including logic and memory bank previous power states.
- * Returns -EINVAL if the powerdomain pointer is null, or returns 0 upon
- * success.
+ * Clear the powerdomain's previous power state register @pwrdm.
+ * Clears the entire register, including logic and memory bank
+ * previous power states.  Returns -EINVAL if the powerdomain pointer
+ * is null, or returns 0 upon success.
  */
 int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
 {
@@ -1096,11 +916,11 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
  * @pwrdm: struct powerdomain *
  *
  * Enable automatic context save-and-restore upon power state change
- * for some devices in a powerdomain.  Warning: this only affects a
- * subset of devices in a powerdomain; check the TRM closely.  Returns
- * -EINVAL if the powerdomain pointer is null or if the powerdomain
- * does not support automatic save-and-restore, or returns 0 upon
- * success.
+ * for some devices in the powerdomain @pwrdm.  Warning: this only
+ * affects a subset of devices in a powerdomain; check the TRM
+ * closely.  Returns -EINVAL if the powerdomain pointer is null or if
+ * the powerdomain does not support automatic save-and-restore, or
+ * returns 0 upon success.
  */
 int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
 {
@@ -1114,7 +934,7 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
 		 pwrdm->name);
 
 	prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-			     pwrdm->prcm_offs, PM_PWSTCTRL);
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -1124,11 +944,11 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
  * @pwrdm: struct powerdomain *
  *
  * Disable automatic context save-and-restore upon power state change
- * for some devices in a powerdomain.  Warning: this only affects a
- * subset of devices in a powerdomain; check the TRM closely.  Returns
- * -EINVAL if the powerdomain pointer is null or if the powerdomain
- * does not support automatic save-and-restore, or returns 0 upon
- * success.
+ * for some devices in the powerdomain @pwrdm.  Warning: this only
+ * affects a subset of devices in a powerdomain; check the TRM
+ * closely.  Returns -EINVAL if the powerdomain pointer is null or if
+ * the powerdomain does not support automatic save-and-restore, or
+ * returns 0 upon success.
  */
 int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 {
@@ -1142,7 +962,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 		 pwrdm->name);
 
 	prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
-			     pwrdm->prcm_offs, PM_PWSTCTRL);
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -1151,7 +971,7 @@ int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
  * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
  * @pwrdm: struct powerdomain *
  *
- * Returns 1 if powerdomain 'pwrdm' supports hardware save-and-restore
+ * Returns 1 if powerdomain @pwrdm supports hardware save-and-restore
  * for some devices, or 0 if it does not.
  */
 bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
@@ -1160,10 +980,38 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
 }
 
 /**
+ * pwrdm_set_lowpwrstchange - Request a low power state change
+ * @pwrdm: struct powerdomain *
+ *
+ * Allows a powerdomain to transtion to a lower power sleep state
+ * from an existing sleep state without waking up the powerdomain.
+ * Returns -EINVAL if the powerdomain pointer is null or if the
+ * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
+ * upon success.
+ */
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE))
+		return -EINVAL;
+
+	pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
+		 pwrdm->name);
+
+	prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+			     (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+
+	return 0;
+}
+
+/**
  * pwrdm_wait_transition - wait for powerdomain power transition to finish
  * @pwrdm: struct powerdomain * to wait for
  *
- * If the powerdomain pwrdm is in the process of a state transition,
+ * If the powerdomain @pwrdm is in the process of a state transition,
  * spin until it completes the power transition, or until an iteration
  * bailout value is reached. Returns -EINVAL if the powerdomain
  * pointer is null, -EAGAIN if the bailout value was reached, or
@@ -1183,10 +1031,10 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	 */
 
 	/* XXX Is this udelay() value meaningful? */
-	while ((prm_read_mod_reg(pwrdm->prcm_offs, PM_PWSTST) &
-		OMAP_INTRANSITION) &&
+	while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
+		OMAP_INTRANSITION_MASK) &&
 	       (c++ < PWRDM_TRANSITION_BAILOUT))
-		udelay(1);
+			udelay(1);
 
 	if (c > PWRDM_TRANSITION_BAILOUT) {
 		printk(KERN_ERR "powerdomain: waited too long for "
@@ -1213,12 +1061,6 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
 
 	return -EINVAL;
 }
-int pwrdm_clk_state_switch(struct clk *clk)
-{
-	if (clk != NULL && clk->clkdm != NULL)
-		return pwrdm_clkdm_state_switch(clk->clkdm);
-	return -EINVAL;
-}
 
 int pwrdm_pre_transition(void)
 {
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 057b2e3..105cbca 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -1,8 +1,8 @@
 /*
  * OMAP2/3 common powerdomain definitions
  *
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Debugging and integration fixes by Jouni Högander
@@ -12,26 +12,21 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * To Do List
+ * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
+ *    Clock Domain Framework
+ */
+
 #ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
 #define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
 
 /*
  * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34XX chips.
- *
- * A few notes:
+ * of software control for the OMAP24xx and OMAP34xx chips.
  *
  * This is not an exhaustive listing of powerdomains on the chips; only
  * powerdomains that can be controlled in software.
- *
- * A useful validation rule for struct powerdomain:
- * Any powerdomain referenced by a wkdep_srcs or sleepdep_srcs array
- * must have a dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really
- * just software-controllable dependencies.  Non-software-controllable
- * dependencies do exist, but they are not encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
  */
 
 /*
@@ -41,26 +36,17 @@
  *
  * On the 2420, this is a 'C55 DSP called, simply, the DSP.  Its
  * powerdomain is called the "DSP power domain."  On the 2430, the
- * on-board DSP is a 'C64 DSP, now called the IVA2 or IVA2.1.  Its
- * powerdomain is still called the "DSP power domain."	On the 3430,
- * the DSP is a 'C64 DSP like the 2430, also known as the IVA2; but
- * its powerdomain is now called the "IVA2 power domain."
+ * on-board DSP is a 'C64 DSP, now called (along with its hardware
+ * accelerators) the IVA2 or IVA2.1.  Its powerdomain is still called
+ * the "DSP power domain." On the 3430, the DSP is a 'C64 DSP like the
+ * 2430, also known as the IVA2; but its powerdomain is now called the
+ * "IVA2 power domain."
  *
  * The 2420 also has something called the IVA, which is a separate ARM
  * core, and has nothing to do with the DSP/IVA2.
  *
  * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
  * address offset is different between the C55 and C64 DSPs.
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- */
-
-/*
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
 #include <plat/powerdomain.h>
@@ -68,69 +54,23 @@
 #include "prcm-common.h"
 #include "prm.h"
 #include "cm.h"
-
-/* OMAP2/3-common powerdomains and wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- */
-static struct pwrdm_dep gfx_sgx_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
-					    CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
-					    CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-/*
- * 3430: CM_SLEEPDEP_CAM: MPU
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- */
-static struct pwrdm_dep cam_gfx_sleepdeps[] = {
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-
 #include "powerdomains24xx.h"
 #include "powerdomains34xx.h"
+#include "powerdomains44xx.h"
 
+/* OMAP2/3-common powerdomains */
 
-/*
- * OMAP2/3 common powerdomains
- */
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 
 /*
  * The GFX powerdomain is not present on 3430ES2, but currently we do not
  * have a macro to filter it out at compile-time.
  */
-static struct powerdomain gfx_pwrdm = {
+static struct powerdomain gfx_omap2_pwrdm = {
 	.name		  = "gfx_pwrdm",
 	.prcm_offs	  = GFX_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
 					   CHIP_IS_OMAP3430ES1),
-	.wkdep_srcs	  = gfx_sgx_wkdeps,
-	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
@@ -142,22 +82,24 @@ static struct powerdomain gfx_pwrdm = {
 	},
 };
 
-static struct powerdomain wkup_pwrdm = {
+static struct powerdomain wkup_omap2_pwrdm = {
 	.name		= "wkup_pwrdm",
 	.prcm_offs	= WKUP_MOD,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
-	.dep_bit	= OMAP_EN_WKUP_SHIFT,
 };
 
+#endif
 
 
 /* As powerdomains are added or removed above, this list must also be changed */
 static struct powerdomain *powerdomains_omap[] __initdata = {
 
-	&gfx_pwrdm,
-	&wkup_pwrdm,
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	&wkup_omap2_pwrdm,
+	&gfx_omap2_pwrdm,
+#endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 	&dsp_pwrdm,
 	&mpu_24xx_pwrdm,
 	&core_24xx_pwrdm,
@@ -167,12 +109,12 @@ static struct powerdomain *powerdomains_omap[] __initdata = {
 	&mdm_pwrdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 	&iva2_pwrdm,
-	&mpu_34xx_pwrdm,
+	&mpu_3xxx_pwrdm,
 	&neon_pwrdm,
-	&core_34xx_pre_es3_1_pwrdm,
-	&core_34xx_es3_1_pwrdm,
+	&core_3xxx_pre_es3_1_pwrdm,
+	&core_3xxx_es3_1_pwrdm,
 	&cam_pwrdm,
 	&dss_pwrdm,
 	&per_pwrdm,
@@ -186,6 +128,24 @@ static struct powerdomain *powerdomains_omap[] __initdata = {
 	&dpll5_pwrdm,
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+	&core_44xx_pwrdm,
+	&gfx_44xx_pwrdm,
+	&abe_44xx_pwrdm,
+	&dss_44xx_pwrdm,
+	&tesla_44xx_pwrdm,
+	&wkup_44xx_pwrdm,
+	&cpu0_44xx_pwrdm,
+	&cpu1_44xx_pwrdm,
+	&emu_44xx_pwrdm,
+	&mpu_44xx_pwrdm,
+	&ivahd_44xx_pwrdm,
+	&cam_44xx_pwrdm,
+	&l3init_44xx_pwrdm,
+	&l4per_44xx_pwrdm,
+	&always_on_core_44xx_pwrdm,
+	&cefuse_44xx_pwrdm,
+#endif
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index bd249a4..775093a 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -2,7 +2,7 @@
  * OMAP24XX powerdomain definitions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Debugging and integration fixes by Jouni Högander
@@ -30,83 +30,7 @@
 
 /* 24XX powerdomains and dependencies */
 
-#ifdef CONFIG_ARCH_OMAP24XX
-
-
-/* Wakeup dependency source arrays */
-
-/*
- * 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP
- * 2430 PM_WKDEP_MDM: same as above
- */
-static struct pwrdm_dep dsp_mdm_24xx_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{ NULL },
-};
-
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct pwrdm_dep mpu_24xx_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "dsp_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "mdm_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
-	},
-	{ NULL },
-};
-
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct pwrdm_dep core_24xx_wkdeps[] = {
-	{
-		.pwrdm_name = "dsp_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "gfx_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
-	},
-	{
-		.pwrdm_name = "mdm_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
-	},
-	{ NULL },
-};
-
+#ifdef CONFIG_ARCH_OMAP2
 
 /* Powerdomains */
 
@@ -114,8 +38,6 @@ static struct powerdomain dsp_pwrdm = {
 	.name		  = "dsp_pwrdm",
 	.prcm_offs	  = OMAP24XX_DSP_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-	.dep_bit	  = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
-	.wkdep_srcs	  = dsp_mdm_24xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
@@ -131,8 +53,6 @@ static struct powerdomain mpu_24xx_pwrdm = {
 	.name		  = "mpu_pwrdm",
 	.prcm_offs	  = MPU_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-	.dep_bit	  = OMAP24XX_EN_MPU_SHIFT,
-	.wkdep_srcs	  = mpu_24xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 1,
@@ -148,9 +68,7 @@ static struct powerdomain core_24xx_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
-	.wkdep_srcs	  = core_24xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.dep_bit	  = OMAP24XX_EN_CORE_SHIFT,
 	.banks		  = 3,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
@@ -164,7 +82,7 @@ static struct powerdomain core_24xx_pwrdm = {
 	},
 };
 
-#endif	   /* CONFIG_ARCH_OMAP24XX */
+#endif	   /* CONFIG_ARCH_OMAP2 */
 
 
 
@@ -176,13 +94,10 @@ static struct powerdomain core_24xx_pwrdm = {
 
 /* XXX 2430 KILLDOMAINWKUP bit?  No current users apparently */
 
-/* Another case of bit name collisions between several registers: EN_MDM */
 static struct powerdomain mdm_pwrdm = {
 	.name		  = "mdm_pwrdm",
 	.prcm_offs	  = OMAP2430_MDM_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-	.dep_bit	  = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
-	.wkdep_srcs	  = dsp_mdm_24xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 588f7e0..bd87112 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -1,8 +1,8 @@
 /*
- * OMAP34XX powerdomain definitions
+ * OMAP3 powerdomain definitions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Debugging and integration fixes by Jouni Högander
@@ -32,128 +32,7 @@
  * 34XX-specific powerdomains, dependencies
  */
 
-#ifdef CONFIG_ARCH_OMAP34XX
-
-/*
- * 3430: PM_WKDEP_{PER,USBHOST}: CORE, IVA2, MPU, WKUP
- * (USBHOST is ES2 only)
- */
-static struct pwrdm_dep per_usbhost_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-/*
- * 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER
- */
-static struct pwrdm_dep mpu_34xx_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "dss_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "per_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-/*
- * 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER
- */
-static struct pwrdm_dep iva2_wkdeps[] = {
-	{
-		.pwrdm_name = "core_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "dss_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "per_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-
-/* 3430 PM_WKDEP_{CAM,DSS}: IVA2, MPU, WKUP */
-static struct pwrdm_dep cam_dss_wkdeps[] = {
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "wkup_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct pwrdm_dep neon_wkdeps[] = {
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
-
-/* Sleep dependency source arrays for 34xx-specific pwrdms - 34XX only */
-
-/*
- * 3430: CM_SLEEPDEP_{DSS,PER}: MPU, IVA
- * 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA
- */
-static struct pwrdm_dep dss_per_usbhost_sleepdeps[] = {
-	{
-		.pwrdm_name = "mpu_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{
-		.pwrdm_name = "iva2_pwrdm",
-		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
-	},
-	{ NULL },
-};
-
+#ifdef CONFIG_ARCH_OMAP3
 
 /*
  * Powerdomains
@@ -163,8 +42,6 @@ static struct powerdomain iva2_pwrdm = {
 	.name		  = "iva2_pwrdm",
 	.prcm_offs	  = OMAP3430_IVA2_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-	.dep_bit	  = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
-	.wkdep_srcs	  = iva2_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 4,
@@ -182,12 +59,10 @@ static struct powerdomain iva2_pwrdm = {
 	},
 };
 
-static struct powerdomain mpu_34xx_pwrdm = {
+static struct powerdomain mpu_3xxx_pwrdm = {
 	.name		  = "mpu_pwrdm",
 	.prcm_offs	  = MPU_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-	.dep_bit	  = OMAP3430_EN_MPU_SHIFT,
-	.wkdep_srcs	  = mpu_34xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.flags		  = PWRDM_HAS_MPU_QUIRK,
@@ -200,15 +75,14 @@ static struct powerdomain mpu_34xx_pwrdm = {
 	},
 };
 
-/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
+static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
 					   CHIP_IS_OMAP3430ES2 |
 					   CHIP_IS_OMAP3430ES3_0),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 2,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
@@ -220,13 +94,12 @@ static struct powerdomain core_34xx_pre_es3_1_pwrdm = {
 	},
 };
 
-/* No wkdeps or sleepdeps for 34xx core apparently */
-static struct powerdomain core_34xx_es3_1_pwrdm = {
+static struct powerdomain core_3xxx_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.dep_bit	  = OMAP3430_EN_CORE_SHIFT,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
 	.banks		  = 2,
 	.pwrsts_mem_ret	  = {
@@ -239,14 +112,10 @@ static struct powerdomain core_34xx_es3_1_pwrdm = {
 	},
 };
 
-/* Another case of bit name collisions between several registers: EN_DSS */
 static struct powerdomain dss_pwrdm = {
 	.name		  = "dss_pwrdm",
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 	.prcm_offs	  = OMAP3430_DSS_MOD,
-	.dep_bit	  = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
-	.wkdep_srcs	  = cam_dss_wkdeps,
-	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
@@ -267,8 +136,6 @@ static struct powerdomain sgx_pwrdm = {
 	.name		  = "sgx_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-	.wkdep_srcs	  = gfx_sgx_wkdeps,
-	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	/* XXX This is accurate for 3430 SGX, but what about GFX? */
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
@@ -285,8 +152,6 @@ static struct powerdomain cam_pwrdm = {
 	.name		  = "cam_pwrdm",
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 	.prcm_offs	  = OMAP3430_CAM_MOD,
-	.wkdep_srcs	  = cam_dss_wkdeps,
-	.sleepdep_srcs	  = cam_gfx_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	.banks		  = 1,
@@ -302,9 +167,6 @@ static struct powerdomain per_pwrdm = {
 	.name		  = "per_pwrdm",
 	.prcm_offs	  = OMAP3430_PER_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-	.dep_bit	  = OMAP3430_EN_PER_SHIFT,
-	.wkdep_srcs	  = per_usbhost_wkdeps,
-	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 1,
@@ -326,7 +188,6 @@ static struct powerdomain neon_pwrdm = {
 	.name		  = "neon_pwrdm",
 	.prcm_offs	  = OMAP3430_NEON_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-	.wkdep_srcs	  = neon_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 };
@@ -335,8 +196,6 @@ static struct powerdomain usbhost_pwrdm = {
 	.name		  = "usbhost_pwrdm",
 	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-	.wkdep_srcs	  = per_usbhost_wkdeps,
-	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
 	/*
@@ -386,7 +245,7 @@ static struct powerdomain dpll5_pwrdm = {
 };
 
 
-#endif    /* CONFIG_ARCH_OMAP34XX */
+#endif    /* CONFIG_ARCH_OMAP3 */
 
 
 #endif
diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx.h
new file mode 100644
index 0000000..c721951
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains44xx.h
@@ -0,0 +1,319 @@
+/*
+ * OMAP4 Power domains framework
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
+#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
+
+#include <plat/powerdomain.h>
+
+#include "prcm-common.h"
+#include "cm.h"
+#include "cm-regbits-44xx.h"
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+/* core_44xx_pwrdm: CORE power domain */
+static struct powerdomain core_44xx_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_CORE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 5,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRDM_POWER_RET,	/* core_other_bank */
+		[3] = PWRSTS_OFF_RET,	/* ducati_l2ram */
+		[4] = PWRSTS_OFF_RET,	/* ducati_unicache */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRDM_POWER_ON,	/* core_other_bank */
+		[3] = PWRDM_POWER_ON,	/* ducati_l2ram */
+		[4] = PWRDM_POWER_ON,	/* ducati_unicache */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* gfx_44xx_pwrdm: 3D accelerator power domain */
+static struct powerdomain gfx_44xx_pwrdm = {
+	.name		  = "gfx_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_GFX_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* gfx_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* gfx_mem */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* abe_44xx_pwrdm: Audio back end power domain */
+static struct powerdomain abe_44xx_pwrdm = {
+	.name		  = "abe_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_ABE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_OFF,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_RET,	/* aessmem */
+		[1] = PWRDM_POWER_OFF,	/* periphmem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* aessmem */
+		[1] = PWRDM_POWER_ON,	/* periphmem */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* dss_44xx_pwrdm: Display subsystem power domain */
+static struct powerdomain dss_44xx_pwrdm = {
+	.name		  = "dss_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_DSS_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* dss_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* dss_mem */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* tesla_44xx_pwrdm: Tesla processor power domain */
+static struct powerdomain tesla_44xx_pwrdm = {
+	.name		  = "tesla_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_TESLA_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_RET,	/* tesla_edma */
+		[1] = PWRSTS_OFF_RET,	/* tesla_l1 */
+		[2] = PWRSTS_OFF_RET,	/* tesla_l2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* tesla_edma */
+		[1] = PWRDM_POWER_ON,	/* tesla_l1 */
+		[2] = PWRDM_POWER_ON,	/* tesla_l2 */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* wkup_44xx_pwrdm: Wake-up power domain */
+static struct powerdomain wkup_44xx_pwrdm = {
+	.name		  = "wkup_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_WKUP_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* wkup_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* wkup_bank */
+	},
+};
+
+/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
+static struct powerdomain cpu0_44xx_pwrdm = {
+	.name		  = "cpu0_pwrdm",
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU0_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* cpu0_l1 */
+	},
+};
+
+/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
+static struct powerdomain cpu1_44xx_pwrdm = {
+	.name		  = "cpu1_pwrdm",
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU1_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* cpu1_l1 */
+	},
+};
+
+/* emu_44xx_pwrdm: Emulation power domain */
+static struct powerdomain emu_44xx_pwrdm = {
+	.name		  = "emu_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_EMU_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* emu_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* emu_bank */
+	},
+};
+
+/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
+static struct powerdomain mpu_44xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_MPU_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l1 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[2] = PWRDM_POWER_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* mpu_l1 */
+		[1] = PWRDM_POWER_ON,	/* mpu_l2 */
+		[2] = PWRDM_POWER_ON,	/* mpu_ram */
+	},
+};
+
+/* ivahd_44xx_pwrdm: IVA-HD power domain */
+static struct powerdomain ivahd_44xx_pwrdm = {
+	.name		  = "ivahd_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_IVAHD_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRDM_POWER_OFF,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* hwa_mem */
+		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
+		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
+		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* hwa_mem */
+		[1] = PWRDM_POWER_ON,	/* sl2_mem */
+		[2] = PWRDM_POWER_ON,	/* tcm1_mem */
+		[3] = PWRDM_POWER_ON,	/* tcm2_mem */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* cam_44xx_pwrdm: Camera subsystem power domain */
+static struct powerdomain cam_44xx_pwrdm = {
+	.name		  = "cam_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_CAM_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* cam_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* cam_mem */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* l3init_44xx_pwrdm: L3 initators pheripherals power domain  */
+static struct powerdomain l3init_44xx_pwrdm = {
+	.name		  = "l3init_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_L3INIT_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* l3init_bank1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* l3init_bank1 */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* l4per_44xx_pwrdm: Target peripherals power domain */
+static struct powerdomain l4per_44xx_pwrdm = {
+	.name		  = "l4per_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_L4PER_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRDM_POWER_OFF,	/* nonretained_bank */
+		[1] = PWRDM_POWER_RET,	/* retained_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRDM_POWER_ON,	/* nonretained_bank */
+		[1] = PWRDM_POWER_ON,	/* retained_bank */
+	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/*
+ * always_on_core_44xx_pwrdm: Always ON logic that sits in VDD_CORE voltage
+ * domain
+ */
+static struct powerdomain always_on_core_44xx_pwrdm = {
+	.name		  = "always_on_core_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_ALWAYS_ON_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_ON,
+};
+
+/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
+static struct powerdomain cefuse_44xx_pwrdm = {
+	.name		  = "cefuse_pwrdm",
+	.prcm_offs	  = OMAP4430_PRM_CEFUSE_MOD,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+	.pwrsts		  = PWRSTS_OFF_ON,
+};
+
+/*
+ * The following power domains are not under SW control
+ *
+ * always_on_iva
+ * always_on_mpu
+ * stdefuse
+ */
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 61ac2a4..995b7ed 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -112,74 +112,75 @@
 
 #define OMAP4430_SCRM_SCRM_MOD	0x0000
 
-/* CHIRONSS instances */
+/* PRCM_MPU instances */
+
+#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD	0x0000
+#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD	0x0200
+#define OMAP4430_PRCM_MPU_CPU0_MOD		0x0400
+#define OMAP4430_PRCM_MPU_CPU1_MOD		0x0800
 
-#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD	0x0000
-#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD	0x0200
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD		0x0400
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD		0x0800
 
 /* 24XX register bits shared between CM & PRM registers */
 
 /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
 #define OMAP2420_EN_MMC_SHIFT				26
-#define OMAP2420_EN_MMC					(1 << 26)
+#define OMAP2420_EN_MMC_MASK				(1 << 26)
 #define OMAP24XX_EN_UART2_SHIFT				22
-#define OMAP24XX_EN_UART2				(1 << 22)
+#define OMAP24XX_EN_UART2_MASK				(1 << 22)
 #define OMAP24XX_EN_UART1_SHIFT				21
-#define OMAP24XX_EN_UART1				(1 << 21)
+#define OMAP24XX_EN_UART1_MASK				(1 << 21)
 #define OMAP24XX_EN_MCSPI2_SHIFT			18
-#define OMAP24XX_EN_MCSPI2				(1 << 18)
+#define OMAP24XX_EN_MCSPI2_MASK				(1 << 18)
 #define OMAP24XX_EN_MCSPI1_SHIFT			17
-#define OMAP24XX_EN_MCSPI1				(1 << 17)
+#define OMAP24XX_EN_MCSPI1_MASK				(1 << 17)
 #define OMAP24XX_EN_MCBSP2_SHIFT			16
-#define OMAP24XX_EN_MCBSP2				(1 << 16)
+#define OMAP24XX_EN_MCBSP2_MASK				(1 << 16)
 #define OMAP24XX_EN_MCBSP1_SHIFT			15
-#define OMAP24XX_EN_MCBSP1				(1 << 15)
+#define OMAP24XX_EN_MCBSP1_MASK				(1 << 15)
 #define OMAP24XX_EN_GPT12_SHIFT				14
-#define OMAP24XX_EN_GPT12				(1 << 14)
+#define OMAP24XX_EN_GPT12_MASK				(1 << 14)
 #define OMAP24XX_EN_GPT11_SHIFT				13
-#define OMAP24XX_EN_GPT11				(1 << 13)
+#define OMAP24XX_EN_GPT11_MASK				(1 << 13)
 #define OMAP24XX_EN_GPT10_SHIFT				12
-#define OMAP24XX_EN_GPT10				(1 << 12)
+#define OMAP24XX_EN_GPT10_MASK				(1 << 12)
 #define OMAP24XX_EN_GPT9_SHIFT				11
-#define OMAP24XX_EN_GPT9				(1 << 11)
+#define OMAP24XX_EN_GPT9_MASK				(1 << 11)
 #define OMAP24XX_EN_GPT8_SHIFT				10
-#define OMAP24XX_EN_GPT8				(1 << 10)
+#define OMAP24XX_EN_GPT8_MASK				(1 << 10)
 #define OMAP24XX_EN_GPT7_SHIFT				9
-#define OMAP24XX_EN_GPT7				(1 << 9)
+#define OMAP24XX_EN_GPT7_MASK				(1 << 9)
 #define OMAP24XX_EN_GPT6_SHIFT				8
-#define OMAP24XX_EN_GPT6				(1 << 8)
+#define OMAP24XX_EN_GPT6_MASK				(1 << 8)
 #define OMAP24XX_EN_GPT5_SHIFT				7
-#define OMAP24XX_EN_GPT5				(1 << 7)
+#define OMAP24XX_EN_GPT5_MASK				(1 << 7)
 #define OMAP24XX_EN_GPT4_SHIFT				6
-#define OMAP24XX_EN_GPT4				(1 << 6)
+#define OMAP24XX_EN_GPT4_MASK				(1 << 6)
 #define OMAP24XX_EN_GPT3_SHIFT				5
-#define OMAP24XX_EN_GPT3				(1 << 5)
+#define OMAP24XX_EN_GPT3_MASK				(1 << 5)
 #define OMAP24XX_EN_GPT2_SHIFT				4
-#define OMAP24XX_EN_GPT2				(1 << 4)
+#define OMAP24XX_EN_GPT2_MASK				(1 << 4)
 #define OMAP2420_EN_VLYNQ_SHIFT				3
-#define OMAP2420_EN_VLYNQ				(1 << 3)
+#define OMAP2420_EN_VLYNQ_MASK				(1 << 3)
 
 /* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
 #define OMAP2430_EN_GPIO5_SHIFT				10
-#define OMAP2430_EN_GPIO5				(1 << 10)
+#define OMAP2430_EN_GPIO5_MASK				(1 << 10)
 #define OMAP2430_EN_MCSPI3_SHIFT			9
-#define OMAP2430_EN_MCSPI3				(1 << 9)
+#define OMAP2430_EN_MCSPI3_MASK				(1 << 9)
 #define OMAP2430_EN_MMCHS2_SHIFT			8
-#define OMAP2430_EN_MMCHS2				(1 << 8)
+#define OMAP2430_EN_MMCHS2_MASK				(1 << 8)
 #define OMAP2430_EN_MMCHS1_SHIFT			7
-#define OMAP2430_EN_MMCHS1				(1 << 7)
+#define OMAP2430_EN_MMCHS1_MASK				(1 << 7)
 #define OMAP24XX_EN_UART3_SHIFT				2
-#define OMAP24XX_EN_UART3				(1 << 2)
+#define OMAP24XX_EN_UART3_MASK				(1 << 2)
 #define OMAP24XX_EN_USB_SHIFT				0
-#define OMAP24XX_EN_USB					(1 << 0)
+#define OMAP24XX_EN_USB_MASK				(1 << 0)
 
 /* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
 #define OMAP2430_EN_MDM_INTC_SHIFT			11
-#define OMAP2430_EN_MDM_INTC				(1 << 11)
+#define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)
 #define OMAP2430_EN_USBHS_SHIFT				6
-#define OMAP2430_EN_USBHS				(1 << 6)
+#define OMAP2430_EN_USBHS_MASK				(1 << 6)
 
 /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
 #define OMAP2420_ST_MMC_SHIFT				26
@@ -237,9 +238,9 @@
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP24XX_EN_GPIOS_SHIFT				2
-#define OMAP24XX_EN_GPIOS				(1 << 2)
+#define OMAP24XX_EN_GPIOS_MASK				(1 << 2)
 #define OMAP24XX_EN_GPT1_SHIFT				0
-#define OMAP24XX_EN_GPT1				(1 << 0)
+#define OMAP24XX_EN_GPT1_MASK				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
 #define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
@@ -258,47 +259,47 @@
 #define OMAP3430_REV_MASK				(0xff << 0)
 
 /* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
-#define OMAP3430_AUTOIDLE				(1 << 0)
+#define OMAP3430_AUTOIDLE_MASK				(1 << 0)
 
 /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_MMC2				(1 << 25)
+#define OMAP3430_EN_MMC2_MASK				(1 << 25)
 #define OMAP3430_EN_MMC2_SHIFT				25
-#define OMAP3430_EN_MMC1				(1 << 24)
+#define OMAP3430_EN_MMC1_MASK				(1 << 24)
 #define OMAP3430_EN_MMC1_SHIFT				24
-#define OMAP3430_EN_MCSPI4				(1 << 21)
+#define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
 #define OMAP3430_EN_MCSPI4_SHIFT			21
-#define OMAP3430_EN_MCSPI3				(1 << 20)
+#define OMAP3430_EN_MCSPI3_MASK				(1 << 20)
 #define OMAP3430_EN_MCSPI3_SHIFT			20
-#define OMAP3430_EN_MCSPI2				(1 << 19)
+#define OMAP3430_EN_MCSPI2_MASK				(1 << 19)
 #define OMAP3430_EN_MCSPI2_SHIFT			19
-#define OMAP3430_EN_MCSPI1				(1 << 18)
+#define OMAP3430_EN_MCSPI1_MASK				(1 << 18)
 #define OMAP3430_EN_MCSPI1_SHIFT			18
-#define OMAP3430_EN_I2C3				(1 << 17)
+#define OMAP3430_EN_I2C3_MASK				(1 << 17)
 #define OMAP3430_EN_I2C3_SHIFT				17
-#define OMAP3430_EN_I2C2				(1 << 16)
+#define OMAP3430_EN_I2C2_MASK				(1 << 16)
 #define OMAP3430_EN_I2C2_SHIFT				16
-#define OMAP3430_EN_I2C1				(1 << 15)
+#define OMAP3430_EN_I2C1_MASK				(1 << 15)
 #define OMAP3430_EN_I2C1_SHIFT				15
-#define OMAP3430_EN_UART2				(1 << 14)
+#define OMAP3430_EN_UART2_MASK				(1 << 14)
 #define OMAP3430_EN_UART2_SHIFT				14
-#define OMAP3430_EN_UART1				(1 << 13)
+#define OMAP3430_EN_UART1_MASK				(1 << 13)
 #define OMAP3430_EN_UART1_SHIFT				13
-#define OMAP3430_EN_GPT11				(1 << 12)
+#define OMAP3430_EN_GPT11_MASK				(1 << 12)
 #define OMAP3430_EN_GPT11_SHIFT				12
-#define OMAP3430_EN_GPT10				(1 << 11)
+#define OMAP3430_EN_GPT10_MASK				(1 << 11)
 #define OMAP3430_EN_GPT10_SHIFT				11
-#define OMAP3430_EN_MCBSP5				(1 << 10)
+#define OMAP3430_EN_MCBSP5_MASK				(1 << 10)
 #define OMAP3430_EN_MCBSP5_SHIFT			10
-#define OMAP3430_EN_MCBSP1				(1 << 9)
+#define OMAP3430_EN_MCBSP1_MASK				(1 << 9)
 #define OMAP3430_EN_MCBSP1_SHIFT			9
-#define OMAP3430_EN_FSHOSTUSB				(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430_EN_D2D					(1 << 3)
+#define OMAP3430_EN_D2D_MASK				(1 << 3)
 #define OMAP3430_EN_D2D_SHIFT				3
 
 /* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_HSOTGUSB				(1 << 4)
-#define OMAP3430_EN_HSOTGUSB_SHIFT				4
+#define OMAP3430_EN_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT			4
 
 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
 #define OMAP3430_ST_MMC2_SHIFT				25
@@ -343,21 +344,21 @@
 #define OMAP3430_ST_D2D_MASK				(1 << 3)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
-#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
 #define OMAP3430_EN_GPT12_SHIFT				1
-#define OMAP3430_EN_GPT1				(1 << 0)
+#define OMAP3430_EN_GPT1_MASK				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
 /* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_SR2					(1 << 7)
+#define OMAP3430_EN_SR2_MASK				(1 << 7)
 #define OMAP3430_EN_SR2_SHIFT				7
-#define OMAP3430_EN_SR1					(1 << 6)
+#define OMAP3430_EN_SR1_MASK				(1 << 6)
 #define OMAP3430_EN_SR1_SHIFT				6
 
 /* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
 #define OMAP3430_EN_GPT12_SHIFT				1
 
 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
@@ -377,47 +378,47 @@
  * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
  * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
  */
-#define OMAP3430_EN_MPU					(1 << 1)
+#define OMAP3430_EN_MPU_MASK				(1 << 1)
 #define OMAP3430_EN_MPU_SHIFT				1
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
-#define OMAP3430_EN_GPIO6				(1 << 17)
+#define OMAP3430_EN_GPIO6_MASK				(1 << 17)
 #define OMAP3430_EN_GPIO6_SHIFT				17
-#define OMAP3430_EN_GPIO5				(1 << 16)
+#define OMAP3430_EN_GPIO5_MASK				(1 << 16)
 #define OMAP3430_EN_GPIO5_SHIFT				16
-#define OMAP3430_EN_GPIO4				(1 << 15)
+#define OMAP3430_EN_GPIO4_MASK				(1 << 15)
 #define OMAP3430_EN_GPIO4_SHIFT				15
-#define OMAP3430_EN_GPIO3				(1 << 14)
+#define OMAP3430_EN_GPIO3_MASK				(1 << 14)
 #define OMAP3430_EN_GPIO3_SHIFT				14
-#define OMAP3430_EN_GPIO2				(1 << 13)
+#define OMAP3430_EN_GPIO2_MASK				(1 << 13)
 #define OMAP3430_EN_GPIO2_SHIFT				13
-#define OMAP3430_EN_UART3				(1 << 11)
+#define OMAP3430_EN_UART3_MASK				(1 << 11)
 #define OMAP3430_EN_UART3_SHIFT				11
-#define OMAP3430_EN_GPT9				(1 << 10)
+#define OMAP3430_EN_GPT9_MASK				(1 << 10)
 #define OMAP3430_EN_GPT9_SHIFT				10
-#define OMAP3430_EN_GPT8				(1 << 9)
+#define OMAP3430_EN_GPT8_MASK				(1 << 9)
 #define OMAP3430_EN_GPT8_SHIFT				9
-#define OMAP3430_EN_GPT7				(1 << 8)
+#define OMAP3430_EN_GPT7_MASK				(1 << 8)
 #define OMAP3430_EN_GPT7_SHIFT				8
-#define OMAP3430_EN_GPT6				(1 << 7)
+#define OMAP3430_EN_GPT6_MASK				(1 << 7)
 #define OMAP3430_EN_GPT6_SHIFT				7
-#define OMAP3430_EN_GPT5				(1 << 6)
+#define OMAP3430_EN_GPT5_MASK				(1 << 6)
 #define OMAP3430_EN_GPT5_SHIFT				6
-#define OMAP3430_EN_GPT4				(1 << 5)
+#define OMAP3430_EN_GPT4_MASK				(1 << 5)
 #define OMAP3430_EN_GPT4_SHIFT				5
-#define OMAP3430_EN_GPT3				(1 << 4)
+#define OMAP3430_EN_GPT3_MASK				(1 << 4)
 #define OMAP3430_EN_GPT3_SHIFT				4
-#define OMAP3430_EN_GPT2				(1 << 3)
+#define OMAP3430_EN_GPT2_MASK				(1 << 3)
 #define OMAP3430_EN_GPT2_SHIFT				3
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
 /* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
  * be ST_* bits instead? */
-#define OMAP3430_EN_MCBSP4				(1 << 2)
+#define OMAP3430_EN_MCBSP4_MASK				(1 << 2)
 #define OMAP3430_EN_MCBSP4_SHIFT			2
-#define OMAP3430_EN_MCBSP3				(1 << 1)
+#define OMAP3430_EN_MCBSP3_MASK				(1 << 1)
 #define OMAP3430_EN_MCBSP3_SHIFT			1
-#define OMAP3430_EN_MCBSP2				(1 << 0)
+#define OMAP3430_EN_MCBSP2_MASK				(1 << 0)
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index cf466ea..c201374 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -11,6 +11,7 @@
  * Rajendra Nayak <rnayak@ti.com>
  *
  * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
+ * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -28,6 +29,7 @@
 #include <plat/control.h>
 
 #include "clock.h"
+#include "clock2xxx.h"
 #include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -121,33 +123,46 @@ struct omap3_prcm_regs prcm_context;
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
-	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
+	if (cpu_is_omap44xx())
+		return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
+
+	return 0;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_arch_reset(char mode)
+void omap_prcm_arch_reset(char mode, const char *cmd)
 {
-	s16 prcm_offs;
-	omap2_clk_prepare_for_reboot();
+	s16 prcm_offs = 0;
+
+	if (cpu_is_omap24xx()) {
+		omap2xxx_clk_prepare_for_reboot();
 
-	if (cpu_is_omap24xx())
 		prcm_offs = WKUP_MOD;
-	else if (cpu_is_omap34xx()) {
+	} else if (cpu_is_omap34xx()) {
 		u32 l;
 
 		prcm_offs = OMAP3430_GR_MOD;
-		l = ('B' << 24) | ('M' << 16) | mode;
+		l = ('B' << 24) | ('M' << 16) | (cmd ? (u8)*cmd : 0);
 		/* Reserve the first word in scratchpad for communicating
 		 * with the boot ROM. A pointer to a data structure
 		 * describing the boot process can be stored there,
 		 * cf. OMAP34xx TRM, Initialization / Software Booting
 		 * Configuration. */
 		omap_writel(l, OMAP343X_SCRATCHPAD + 4);
-	} else
+	} else if (cpu_is_omap44xx())
+		prcm_offs = OMAP4430_PRM_DEVICE_MOD;
+	else
 		WARN_ON(1);
 
-	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
+						 OMAP2_RM_RSTCTRL);
+	if (cpu_is_omap44xx())
+		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
+						 OMAP4_RM_RSTCTRL);
 }
 
 static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
@@ -188,6 +203,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 	return v;
 }
 
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = prm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {
@@ -217,26 +244,22 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
  * @reg: physical address of module IDLEST register
  * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
  * @name: name of the clock (for printk)
  *
  * Returns 1 if the module indicated readiness in time, or 0 if it
  * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
  */
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+				const char *name)
 {
 	int i = 0;
 	int ena = 0;
 
-	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
-	 */
-	if (cpu_is_omap24xx())
-		ena = mask;
-	else if (cpu_is_omap34xx())
+	if (idlest)
 		ena = 0;
 	else
-		BUG();
+		ena = mask;
 
 	/* Wait for lock */
 	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
@@ -254,9 +277,19 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
 
 void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
-	prm_base = omap2_globals->prm;
-	cm_base = omap2_globals->cm;
-	cm2_base = omap2_globals->cm2;
+	/* Static mapping, never released */
+	if (omap2_globals->prm) {
+		prm_base = ioremap(omap2_globals->prm, SZ_8K);
+		WARN_ON(!prm_base);
+	}
+	if (omap2_globals->cm) {
+		cm_base = ioremap(omap2_globals->cm, SZ_8K);
+		WARN_ON(!cm_base);
+	}
+	if (omap2_globals->cm2) {
+		cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
+		WARN_ON(!cm2_base);
+	}
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -280,7 +313,7 @@ void omap3_prcm_save_context(void)
 	prcm_context.emu_cm_clksel =
 			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
 	prcm_context.emu_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.pll_cm_autoidle2 =
 			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
 	prcm_context.pll_cm_clksel4 =
@@ -333,23 +366,25 @@ void omap3_prcm_save_context(void)
 	prcm_context.mpu_cm_autoidle2 =
 			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
 	prcm_context.iva2_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.mpu_cm_clkstctrl =
-			 cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.core_cm_clkstctrl =
-			 cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.sgx_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+						OMAP2_CM_CLKSTCTRL);
 	prcm_context.dss_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.cam_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.per_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.neon_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
 	prcm_context.usbhost_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+						OMAP2_CM_CLKSTCTRL);
 	prcm_context.core_cm_autoidle1 =
 			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
 	prcm_context.core_cm_autoidle2 =
@@ -432,7 +467,7 @@ void omap3_prcm_restore_context(void)
 	cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
 					 CM_CLKSEL1);
 	cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
-					 CM_CLKSTCTRL);
+					 OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
 					 CM_AUTOIDLE2);
 	cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
@@ -478,22 +513,23 @@ void omap3_prcm_restore_context(void)
 					CM_AUTOIDLE2);
 	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
 	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
-					CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD,
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
-					CM_CLKSTCTRL);
+					OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
-					OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+				OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
 					CM_AUTOIDLE1);
 	cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 4002051..0b188ff 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -19,14 +19,14 @@
 /* Bits shared between registers */
 
 /* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST				(1 << 2)
-#define OMAP24XX_WKUP2_ST				(1 << 1)
-#define OMAP24XX_WKUP1_ST				(1 << 0)
+#define OMAP24XX_VOLTTRANS_ST_MASK			(1 << 2)
+#define OMAP24XX_WKUP2_ST_MASK				(1 << 1)
+#define OMAP24XX_WKUP1_ST_MASK				(1 << 0)
 
 /* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN				(1 << 2)
-#define OMAP24XX_WKUP2_EN				(1 << 1)
-#define OMAP24XX_WKUP1_EN				(1 << 0)
+#define OMAP24XX_VOLTTRANS_EN_MASK			(1 << 2)
+#define OMAP24XX_WKUP2_EN_MASK				(1 << 1)
+#define OMAP24XX_WKUP1_EN_MASK				(1 << 0)
 
 /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
 #define OMAP24XX_EN_MPU_SHIFT				1
@@ -40,16 +40,16 @@
  */
 #define OMAP24XX_MEMONSTATE_SHIFT			10
 #define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEMRETSTATE				(1 << 3)
+#define OMAP24XX_MEMRETSTATE_MASK			(1 << 3)
 
 /* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
-#define OMAP24XX_FORCESTATE				(1 << 18)
+#define OMAP24XX_FORCESTATE_MASK			(1 << 18)
 
 /*
  * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
  * PM_PWSTST_MDM shared bits
  */
-#define OMAP24XX_CLKACTIVITY				(1 << 19)
+#define OMAP24XX_CLKACTIVITY_MASK			(1 << 19)
 
 /* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
 #define OMAP24XX_LASTSTATEENTERED_SHIFT			4
@@ -71,26 +71,26 @@
 #define OMAP24XX_REV_MASK				(0xff << 0)
 
 /* PRCM_SYSCONFIG */
-#define OMAP24XX_AUTOIDLE				(1 << 0)
+#define OMAP24XX_AUTOIDLE_MASK				(1 << 0)
 
 /* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST				(1 << 6)
-#define OMAP24XX_TRANSITION_ST				(1 << 5)
-#define OMAP24XX_EVGENOFF_ST				(1 << 4)
-#define OMAP24XX_EVGENON_ST				(1 << 3)
+#define OMAP2430_DPLL_RECAL_ST_MASK			(1 << 6)
+#define OMAP24XX_TRANSITION_ST_MASK			(1 << 5)
+#define OMAP24XX_EVGENOFF_ST_MASK			(1 << 4)
+#define OMAP24XX_EVGENON_ST_MASK			(1 << 3)
 
 /* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN				(1 << 6)
-#define OMAP24XX_TRANSITION_EN				(1 << 5)
-#define OMAP24XX_EVGENOFF_EN				(1 << 4)
-#define OMAP24XX_EVGENON_EN				(1 << 3)
+#define OMAP2430_DPLL_RECAL_EN_MASK			(1 << 6)
+#define OMAP24XX_TRANSITION_EN_MASK			(1 << 5)
+#define OMAP24XX_EVGENOFF_EN_MASK			(1 << 4)
+#define OMAP24XX_EVGENON_EN_MASK			(1 << 3)
 
 /* PRCM_VOLTCTRL */
-#define OMAP24XX_AUTO_EXTVOLT				(1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT				(1 << 14)
+#define OMAP24XX_AUTO_EXTVOLT_MASK			(1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT_MASK			(1 << 14)
 #define OMAP24XX_SETOFF_LEVEL_SHIFT			12
 #define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
-#define OMAP24XX_MEMRETCTRL				(1 << 8)
+#define OMAP24XX_MEMRETCTRL_MASK			(1 << 8)
 #define OMAP24XX_SETRET_LEVEL_SHIFT			6
 #define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
 #define OMAP24XX_VOLT_LEVEL_SHIFT			0
@@ -104,13 +104,13 @@
 
 /* PRCM_CLKOUT_CTRL */
 #define OMAP2420_CLKOUT2_EN_SHIFT			15
-#define OMAP2420_CLKOUT2_EN				(1 << 15)
+#define OMAP2420_CLKOUT2_EN_MASK			(1 << 15)
 #define OMAP2420_CLKOUT2_DIV_SHIFT			11
 #define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
 #define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
 #define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
 #define OMAP24XX_CLKOUT_EN_SHIFT			7
-#define OMAP24XX_CLKOUT_EN				(1 << 7)
+#define OMAP24XX_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP24XX_CLKOUT_DIV_SHIFT			3
 #define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
 #define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
@@ -118,25 +118,25 @@
 
 /* PRCM_CLKEMUL_CTRL */
 #define OMAP24XX_EMULATION_EN_SHIFT			0
-#define OMAP24XX_EMULATION_EN				(1 << 0)
+#define OMAP24XX_EMULATION_EN_MASK			(1 << 0)
 
 /* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG				(1 << 0)
+#define OMAP24XX_VALID_CONFIG_MASK			(1 << 0)
 
 /* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS				(1 << 0)
+#define OMAP24XX_CONFIG_STATUS_MASK			(1 << 0)
 
 /* PRCM_VOLTSETUP specific bits */
 
 /* PRCM_CLKSSETUP specific bits */
 
 /* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL				(1 << 10)
-#define OMAP24XX_CLKOUT_POL				(1 << 9)
-#define OMAP24XX_CLKREQ_POL				(1 << 8)
-#define OMAP2430_USE_POWEROK				(1 << 2)
-#define OMAP2430_POWEROK_POL				(1 << 1)
-#define OMAP24XX_EXTVOL_POL				(1 << 0)
+#define OMAP2420_CLKOUT2_POL_MASK			(1 << 10)
+#define OMAP24XX_CLKOUT_POL_MASK			(1 << 9)
+#define OMAP24XX_CLKREQ_POL_MASK			(1 << 8)
+#define OMAP2430_USE_POWEROK_MASK			(1 << 2)
+#define OMAP2430_POWEROK_POL_MASK			(1 << 1)
+#define OMAP24XX_EXTVOL_POL_MASK			(1 << 0)
 
 /* RM_RSTST_MPU specific bits */
 /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
@@ -154,7 +154,7 @@
 /* PM_EVEGENOFFTIM_MPU specific bits */
 
 /* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE				(1 << 18)
+#define OMAP2430_FORCESTATE_MASK			(1 << 18)
 
 /* PM_PWSTST_MPU specific bits */
 /* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
@@ -168,21 +168,21 @@
 /* PM_WKST2_CORE specific bits */
 
 /* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM			(1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX			(1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP			(1 << 2)
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK		(1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK		(1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE				(1 << 20)
+#define OMAP24XX_MEMORYCHANGE_MASK			(1 << 20)
 #define OMAP24XX_MEM3ONSTATE_SHIFT			14
 #define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
 #define OMAP24XX_MEM2ONSTATE_SHIFT			12
 #define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
 #define OMAP24XX_MEM1ONSTATE_SHIFT			10
 #define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE				(1 << 5)
-#define OMAP24XX_MEM2RETSTATE				(1 << 4)
-#define OMAP24XX_MEM1RETSTATE				(1 << 3)
+#define OMAP24XX_MEM3RETSTATE_MASK			(1 << 5)
+#define OMAP24XX_MEM2RETSTATE_MASK			(1 << 4)
+#define OMAP24XX_MEM1RETSTATE_MASK			(1 << 3)
 
 /* PM_PWSTST_CORE specific bits */
 #define OMAP24XX_MEM3STATEST_SHIFT			14
@@ -193,10 +193,10 @@
 #define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
 
 /* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST				(1 << 0)
+#define OMAP24XX_GFX_RST_MASK				(1 << 0)
 
 /* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST				(1 << 4)
+#define OMAP24XX_GFX_SW_RST_MASK			(1 << 4)
 
 /* PM_PWSTCTRL_GFX specific bits */
 
@@ -209,25 +209,25 @@
 
 /* RM_RSTST_WKUP specific bits */
 /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP24XX_EXTWMPU_RST				(1 << 6)
-#define OMAP24XX_SECU_WD_RST				(1 << 5)
-#define OMAP24XX_MPU_WD_RST				(1 << 4)
-#define OMAP24XX_SECU_VIOL_RST				(1 << 3)
+#define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
+#define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
+#define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
 
 /* PM_WKEN_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
 
 /* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA				(1 << 8)
-#define OMAP24XX_RST2_DSP				(1 << 1)
-#define OMAP24XX_RST1_DSP				(1 << 0)
+#define OMAP2420_RST_IVA_MASK				(1 << 8)
+#define OMAP24XX_RST2_DSP_MASK				(1 << 1)
+#define OMAP24XX_RST1_DSP_MASK				(1 << 0)
 
 /* RM_RSTST_DSP specific bits */
 /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST				(1 << 8)
-#define OMAP24XX_DSP_SW_RST2				(1 << 5)
-#define OMAP24XX_DSP_SW_RST1				(1 << 4)
+#define OMAP2420_IVA_SW_RST_MASK			(1 << 8)
+#define OMAP24XX_DSP_SW_RST2_MASK			(1 << 5)
+#define OMAP24XX_DSP_SW_RST1_MASK			(1 << 4)
 
 /* PM_WKDEP_DSP specific bits */
 
@@ -235,7 +235,7 @@
 /* 2430 only: MEMONSTATE, MEMRETSTATE */
 #define OMAP2420_MEMIONSTATE_SHIFT			12
 #define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
-#define OMAP2420_MEMIRETSTATE				(1 << 4)
+#define OMAP2420_MEMIRETSTATE_MASK			(1 << 4)
 
 /* PM_PWSTST_DSP specific bits */
 /* MEMSTATEST is 2430 only */
@@ -248,18 +248,18 @@
 
 /* RM_RSTCTRL_MDM */
 /* 2430 only */
-#define OMAP2430_PWRON1_MDM				(1 << 1)
-#define OMAP2430_RST1_MDM				(1 << 0)
+#define OMAP2430_PWRON1_MDM_MASK			(1 << 1)
+#define OMAP2430_RST1_MDM_MASK				(1 << 0)
 
 /* RM_RSTST_MDM specific bits */
 /* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL				(1 << 6)
-#define OMAP2430_MDM_SW_PWRON1				(1 << 5)
-#define OMAP2430_MDM_SW_RST1				(1 << 4)
+#define OMAP2430_MDM_SECU_VIOL_MASK			(1 << 6)
+#define OMAP2430_MDM_SW_PWRON1_MASK			(1 << 5)
+#define OMAP2430_MDM_SW_RST1_MASK			(1 << 4)
 
 /* PM_WKEN_MDM */
 /* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM			(1 << 0)
+#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK		(1 << 0)
 
 /* PM_WKST_MDM specific bits */
 /* 2430 only */
@@ -269,7 +269,7 @@
 
 /* PM_PWSTCTRL_MDM specific bits */
 /* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP				(1 << 19)
+#define OMAP2430_KILLDOMAINWKUP_MASK			(1 << 19)
 
 /* PM_PWSTST_MDM specific bits */
 /* 2430 only */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 8f21bae6..7fd6023 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -35,10 +35,10 @@
 #define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
 #define OMAP3430_INITVOLTAGE_SHIFT			8
 #define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
-#define OMAP3430_TIMEOUTEN				(1 << 3)
-#define OMAP3430_INITVDD				(1 << 2)
-#define OMAP3430_FORCEUPDATE				(1 << 1)
-#define OMAP3430_VPENABLE				(1 << 0)
+#define OMAP3430_TIMEOUTEN_MASK				(1 << 3)
+#define OMAP3430_INITVDD_MASK				(1 << 2)
+#define OMAP3430_FORCEUPDATE_MASK			(1 << 1)
+#define OMAP3430_VPENABLE_MASK				(1 << 0)
 
 /* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
 #define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
@@ -65,53 +65,53 @@
 #define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
 
 /* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE				(1 << 0)
+#define OMAP3430_VPINIDLE_MASK				(1 << 0)
 
 /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
 #define OMAP3430_EN_PER_SHIFT				7
 #define OMAP3430_EN_PER_MASK				(1 << 7)
 
 /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE				(1 << 3)
+#define OMAP3430_MEMORYCHANGE_MASK			(1 << 3)
 
 /* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
-#define OMAP3430_LOGICSTATEST				(1 << 2)
+#define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
 
 /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED			(1 << 2)
+#define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
 
 /*
  * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
  * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
  * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
  */
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT			0
-#define OMAP3430_LASTPOWERSTATEENTERED_MASK			(0x3 << 0)
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT		0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
 
 /* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST				(1 << 0)
+#define OMAP3430_WKUP_ST_MASK				(1 << 0)
 
 /* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN					(1 << 0)
+#define OMAP3430_WKUP_EN_MASK				(1 << 0)
 
 /* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2				(1 << 25)
-#define OMAP3430_GRPSEL_MMC1				(1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4				(1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3				(1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2				(1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1				(1 << 18)
-#define OMAP3430_GRPSEL_I2C3				(1 << 17)
-#define OMAP3430_GRPSEL_I2C2				(1 << 16)
-#define OMAP3430_GRPSEL_I2C1				(1 << 15)
-#define OMAP3430_GRPSEL_UART2				(1 << 14)
-#define OMAP3430_GRPSEL_UART1				(1 << 13)
-#define OMAP3430_GRPSEL_GPT11				(1 << 12)
-#define OMAP3430_GRPSEL_GPT10				(1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5				(1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1				(1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB			(1 << 4)
-#define OMAP3430_GRPSEL_D2D				(1 << 3)
+#define OMAP3430_GRPSEL_MMC2_MASK			(1 << 25)
+#define OMAP3430_GRPSEL_MMC1_MASK			(1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4_MASK			(1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
+#define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
+#define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
+#define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
+#define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
+#define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
+#define OMAP3430_GRPSEL_GPT11_MASK			(1 << 12)
+#define OMAP3430_GRPSEL_GPT10_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430_GRPSEL_D2D_MASK			(1 << 3)
 
 /*
  * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
@@ -119,49 +119,49 @@
  */
 #define OMAP3430_MEMONSTATE_SHIFT			16
 #define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEMRETSTATE				(1 << 8)
+#define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
 
 /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
-#define OMAP3430_GRPSEL_GPIO6				(1 << 17)
-#define OMAP3430_GRPSEL_GPIO5				(1 << 16)
-#define OMAP3430_GRPSEL_GPIO4				(1 << 15)
-#define OMAP3430_GRPSEL_GPIO3				(1 << 14)
-#define OMAP3430_GRPSEL_GPIO2				(1 << 13)
-#define OMAP3430_GRPSEL_UART3				(1 << 11)
-#define OMAP3430_GRPSEL_GPT9				(1 << 10)
-#define OMAP3430_GRPSEL_GPT8				(1 << 9)
-#define OMAP3430_GRPSEL_GPT7				(1 << 8)
-#define OMAP3430_GRPSEL_GPT6				(1 << 7)
-#define OMAP3430_GRPSEL_GPT5				(1 << 6)
-#define OMAP3430_GRPSEL_GPT4				(1 << 5)
-#define OMAP3430_GRPSEL_GPT3				(1 << 4)
-#define OMAP3430_GRPSEL_GPT2				(1 << 3)
-#define OMAP3430_GRPSEL_MCBSP4				(1 << 2)
-#define OMAP3430_GRPSEL_MCBSP3				(1 << 1)
-#define OMAP3430_GRPSEL_MCBSP2				(1 << 0)
+#define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
+#define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
+#define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)
+#define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
+#define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
+#define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_GPT9_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
+#define OMAP3430_GRPSEL_GPT4_MASK			(1 << 5)
+#define OMAP3430_GRPSEL_GPT3_MASK			(1 << 4)
+#define OMAP3430_GRPSEL_GPT2_MASK			(1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
 
 /* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO				(1 << 8)
-#define OMAP3430_GRPSEL_SR2				(1 << 7)
-#define OMAP3430_GRPSEL_SR1				(1 << 6)
-#define OMAP3430_GRPSEL_GPIO1				(1 << 3)
-#define OMAP3430_GRPSEL_GPT12				(1 << 1)
-#define OMAP3430_GRPSEL_GPT1				(1 << 0)
+#define OMAP3430_GRPSEL_IO_MASK				(1 << 8)
+#define OMAP3430_GRPSEL_SR2_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_SR1_MASK			(1 << 6)
+#define OMAP3430_GRPSEL_GPIO1_MASK			(1 << 3)
+#define OMAP3430_GRPSEL_GPT12_MASK			(1 << 1)
+#define OMAP3430_GRPSEL_GPT1_MASK			(1 << 0)
 
 /* Bits specific to each register */
 
 /* RM_RSTCTRL_IVA2 */
-#define OMAP3430_RST3_IVA2				(1 << 2)
-#define OMAP3430_RST2_IVA2				(1 << 1)
-#define OMAP3430_RST1_IVA2				(1 << 0)
+#define OMAP3430_RST3_IVA2_MASK				(1 << 2)
+#define OMAP3430_RST2_IVA2_MASK				(1 << 1)
+#define OMAP3430_RST1_IVA2_MASK				(1 << 0)
 
 /* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST			(1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST			(1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST			(1 << 11)
-#define OMAP3430_IVA2_SW_RST3				(1 << 10)
-#define OMAP3430_IVA2_SW_RST2				(1 << 9)
-#define OMAP3430_IVA2_SW_RST1				(1 << 8)
+#define OMAP3430_EMULATION_VSEQ_RST_MASK		(1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST_MASK		(1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST_MASK		(1 << 11)
+#define OMAP3430_IVA2_SW_RST3_MASK			(1 << 10)
+#define OMAP3430_IVA2_SW_RST2_MASK			(1 << 9)
+#define OMAP3430_IVA2_SW_RST1_MASK			(1 << 8)
 
 /* PM_WKDEP_IVA2 specific bits */
 
@@ -174,10 +174,10 @@
 #define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
-#define OMAP3430_L2FLATMEMRETSTATE			(1 << 11)
-#define OMAP3430_SHAREDL2CACHEFLATRETSTATE		(1 << 10)
-#define OMAP3430_L1FLATMEMRETSTATE			(1 << 9)
-#define OMAP3430_SHAREDL1CACHEFLATRETSTATE		(1 << 8)
+#define OMAP3430_L2FLATMEMRETSTATE_MASK			(1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK		(1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE_MASK			(1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK		(1 << 8)
 
 /* PM_PWSTST_IVA2 specific bits */
 #define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
@@ -200,12 +200,12 @@
 #define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
 
 /* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST	(1 << 2)
-#define OMAP3430_FORCEWKUP_ST				(1 << 1)
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK	(1 << 2)
+#define OMAP3430_FORCEWKUP_ST_MASK			(1 << 1)
 
 /* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN		(1 << 2)
-#define OMAP3430_FORCEWKUP_EN					(1 << 1)
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK	(1 << 2)
+#define OMAP3430_FORCEWKUP_EN_MASK				(1 << 1)
 
 /* PRM_REVISION specific bits */
 
@@ -213,70 +213,70 @@
 
 /* PRM_IRQSTATUS_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST			(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST			(1 << 24)
-#define OMAP3430_VC_RAERR_ST				(1 << 23)
-#define OMAP3430_VC_SAERR_ST				(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_ST			(1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST				(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST			(1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST				(1 << 18)
-#define OMAP3430_VP2_MINVDD_ST				(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST			(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_ST			(1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST				(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST			(1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST				(1 << 12)
-#define OMAP3430_VP1_MINVDD_ST				(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST			(1 << 10)
-#define OMAP3430_IO_ST					(1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST		(1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK		(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST_MASK			(1 << 24)
+#define OMAP3430_VC_RAERR_ST_MASK			(1 << 23)
+#define OMAP3430_VC_SAERR_ST_MASK			(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST_MASK			(1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST_MASK			(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST_MASK			(1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST_MASK			(1 << 18)
+#define OMAP3430_VP2_MINVDD_ST_MASK			(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK		(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST_MASK			(1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST_MASK			(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST_MASK			(1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST_MASK			(1 << 12)
+#define OMAP3430_VP1_MINVDD_ST_MASK			(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK		(1 << 10)
+#define OMAP3430_IO_ST_MASK				(1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
-#define OMAP3430_MPU_DPLL_ST				(1 << 7)
+#define OMAP3430_MPU_DPLL_ST_MASK			(1 << 7)
 #define OMAP3430_MPU_DPLL_ST_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_ST				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
-#define OMAP3430_CORE_DPLL_ST				(1 << 5)
+#define OMAP3430_CORE_DPLL_ST_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_ST_SHIFT			5
-#define OMAP3430_TRANSITION_ST				(1 << 4)
-#define OMAP3430_EVGENOFF_ST				(1 << 3)
-#define OMAP3430_EVGENON_ST				(1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST				(1 << 1)
+#define OMAP3430_TRANSITION_ST_MASK			(1 << 4)
+#define OMAP3430_EVGENOFF_ST_MASK			(1 << 3)
+#define OMAP3430_EVGENON_ST_MASK			(1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST_MASK			(1 << 1)
 
 /* PRM_IRQENABLE_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN			(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN				(1 << 24)
-#define OMAP3430_VC_RAERR_EN					(1 << 23)
-#define OMAP3430_VC_SAERR_EN					(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN				(1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN					(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN				(1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN					(1 << 18)
-#define OMAP3430_VP2_MINVDD_EN					(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN				(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN				(1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN					(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN				(1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN					(1 << 12)
-#define OMAP3430_VP1_MINVDD_EN					(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN				(1 << 10)
-#define OMAP3430_IO_EN						(1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN		(1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK		(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN_MASK				(1 << 24)
+#define OMAP3430_VC_RAERR_EN_MASK				(1 << 23)
+#define OMAP3430_VC_SAERR_EN_MASK				(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN_MASK				(1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN_MASK				(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN_MASK				(1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN_MASK				(1 << 18)
+#define OMAP3430_VP2_MINVDD_EN_MASK				(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK			(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN_MASK				(1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN_MASK				(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN_MASK				(1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN_MASK				(1 << 12)
+#define OMAP3430_VP1_MINVDD_EN_MASK				(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK			(1 << 10)
+#define OMAP3430_IO_EN_MASK					(1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
-#define OMAP3430_MPU_DPLL_RECAL_EN				(1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_MASK				(1 << 7)
 #define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
-#define OMAP3430_CORE_DPLL_RECAL_EN				(1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
-#define OMAP3430_TRANSITION_EN					(1 << 4)
-#define OMAP3430_EVGENOFF_EN					(1 << 3)
-#define OMAP3430_EVGENON_EN					(1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN					(1 << 1)
+#define OMAP3430_TRANSITION_EN_MASK				(1 << 4)
+#define OMAP3430_EVGENOFF_EN_MASK				(1 << 3)
+#define OMAP3430_EVGENON_EN_MASK				(1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN_MASK				(1 << 1)
 
 /* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST			(1 << 11)
+#define OMAP3430_EMULATION_MPU_RST_MASK			(1 << 11)
 
 /* PM_WKDEP_MPU specific bits */
 #define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
@@ -289,7 +289,7 @@
 #define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
 #define OMAP3430_ONLOADMODE_SHIFT			1
 #define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
-#define OMAP3430_ENABLE					(1 << 0)
+#define OMAP3430_ENABLE_MASK				(1 << 0)
 
 /* PM_EVGENONTIM_MPU */
 #define OMAP3430_ONTIMEVAL_SHIFT			0
@@ -302,32 +302,32 @@
 /* PM_PWSTCTRL_MPU specific bits */
 #define OMAP3430_L2CACHEONSTATE_SHIFT			16
 #define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE			(1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE			(1 << 2)
+#define OMAP3430_L2CACHERETSTATE_MASK			(1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE_MASK		(1 << 2)
 
 /* PM_PWSTST_MPU specific bits */
 #define OMAP3430_L2CACHESTATEST_SHIFT			6
 #define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST			(1 << 2)
+#define OMAP3430_LOGICL1CACHESTATEST_MASK		(1 << 2)
 
 /* PM_PREPWSTST_MPU specific bits */
 #define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
 #define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED		(1 << 2)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK	(1 << 2)
 
 /* RM_RSTCTRL_CORE */
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON		(1 << 1)
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST			(1 << 0)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK		(1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK		(1 << 0)
 
 /* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST		(1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON	(1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST		(1 << 8)
+#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK		(1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK	(1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK	(1 << 8)
 
 /* PM_WKEN1_CORE specific bits */
 
 /* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB			(1 << 5)
+#define OMAP3430_GRPSEL_FSHOSTUSB_MASK			(1 << 5)
 
 /* PM_IVA2GRPSEL1_CORE specific bits */
 
@@ -338,8 +338,8 @@
 #define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
 #define OMAP3430_MEM1ONSTATE_SHIFT			16
 #define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEM2RETSTATE				(1 << 9)
-#define OMAP3430_MEM1RETSTATE				(1 << 8)
+#define OMAP3430_MEM2RETSTATE_MASK			(1 << 9)
+#define OMAP3430_MEM1RETSTATE_MASK			(1 << 8)
 
 /* PM_PWSTST_CORE specific bits */
 #define OMAP3430_MEM2STATEST_SHIFT			6
@@ -356,7 +356,7 @@
 /* RM_RSTST_GFX specific bits */
 
 /* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_GFX specific bits */
 
@@ -365,33 +365,33 @@
 /* PM_PREPWSTST_GFX specific bits */
 
 /* PM_WKEN_WKUP specific bits */
-#define OMAP3430_EN_IO_CHAIN				(1 << 16)
-#define OMAP3430_EN_IO					(1 << 8)
-#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_IO_CHAIN_MASK			(1 << 16)
+#define OMAP3430_EN_IO_MASK				(1 << 8)
+#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
 
 /* PM_MPUGRPSEL_WKUP specific bits */
 
 /* PM_IVA2GRPSEL_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
-#define OMAP3430_ST_IO_CHAIN				(1 << 16)
-#define OMAP3430_ST_IO					(1 << 8)
+#define OMAP3430_ST_IO_CHAIN_MASK			(1 << 16)
+#define OMAP3430_ST_IO_MASK				(1 << 8)
 
 /* PRM_CLKSEL */
 #define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
 #define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
 
 /* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN				(1 << 7)
+#define OMAP3430_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP3430_CLKOUT_EN_SHIFT			7
 
 /* RM_RSTST_DSS specific bits */
 
 /* PM_WKEN_DSS */
-#define OMAP3430_PM_WKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK		(1 << 0)
 
 /* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_DSS specific bits */
 
@@ -402,7 +402,7 @@
 /* RM_RSTST_CAM specific bits */
 
 /* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_CAM specific bits */
 
@@ -424,7 +424,7 @@
 /* PM_WKST_PER specific bits */
 
 /* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_PER specific bits */
 
@@ -467,26 +467,26 @@
 /* PRM_VC_CMD_VAL_1 specific bits */
 
 /* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1					(1 << 20)
-#define OMAP3430_RACEN1					(1 << 19)
-#define OMAP3430_RAC1					(1 << 18)
-#define OMAP3430_RAV1					(1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1			(1 << 16)
-#define OMAP3430_CMD0					(1 << 4)
-#define OMAP3430_RACEN0					(1 << 3)
-#define OMAP3430_RAC0					(1 << 2)
-#define OMAP3430_RAV0					(1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0			(1 << 0)
+#define OMAP3430_CMD1_MASK				(1 << 20)
+#define OMAP3430_RACEN1_MASK				(1 << 19)
+#define OMAP3430_RAC1_MASK				(1 << 18)
+#define OMAP3430_RAV1_MASK				(1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK		(1 << 16)
+#define OMAP3430_CMD0_MASK				(1 << 4)
+#define OMAP3430_RACEN0_MASK				(1 << 3)
+#define OMAP3430_RAC0_MASK				(1 << 2)
+#define OMAP3430_RAV0_MASK				(1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK		(1 << 0)
 
 /* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER				(1 << 5)
-#define OMAP3430_SREN					(1 << 4)
-#define OMAP3430_HSEN					(1 << 3)
+#define OMAP3430_HSMASTER_MASK				(1 << 5)
+#define OMAP3430_SREN_MASK				(1 << 4)
+#define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_SHIFT				0
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 
 /* PRM_VC_BYPASS_VAL */
-#define OMAP3430_VALID					(1 << 24)
+#define OMAP3430_VALID_MASK				(1 << 24)
 #define OMAP3430_DATA_SHIFT				16
 #define OMAP3430_DATA_MASK				(0xff << 16)
 #define OMAP3430_REGADDR_SHIFT				8
@@ -495,8 +495,8 @@
 #define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
 
 /* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3				(1 << 2)
-#define OMAP3430_RST_GS					(1 << 1)
+#define OMAP3430_RST_DPLL3_MASK				(1 << 2)
+#define OMAP3430_RST_GS_MASK				(1 << 1)
 
 /* PRM_RSTTIME */
 #define OMAP3430_RSTTIME2_SHIFT				8
@@ -505,23 +505,23 @@
 #define OMAP3430_RSTTIME1_MASK				(0xff << 0)
 
 /* PRM_RSTST */
-#define OMAP3430_ICECRUSHER_RST				(1 << 10)
-#define OMAP3430_ICEPICK_RST				(1 << 9)
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST		(1 << 8)
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST		(1 << 7)
-#define OMAP3430_EXTERNAL_WARM_RST			(1 << 6)
-#define OMAP3430_SECURE_WD_RST				(1 << 5)
-#define OMAP3430_MPU_WD_RST				(1 << 4)
-#define OMAP3430_SECURITY_VIOL_RST			(1 << 3)
-#define OMAP3430_GLOBAL_SW_RST				(1 << 1)
-#define OMAP3430_GLOBAL_COLD_RST			(1 << 0)
+#define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
+#define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
+#define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
+#define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
 
 /* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE				(1 << 4)
-#define OMAP3430_SEL_OFF				(1 << 3)
-#define OMAP3430_AUTO_OFF				(1 << 2)
-#define OMAP3430_AUTO_RET				(1 << 1)
-#define OMAP3430_AUTO_SLEEP				(1 << 0)
+#define OMAP3430_SEL_VMODE_MASK				(1 << 4)
+#define OMAP3430_SEL_OFF_MASK				(1 << 3)
+#define OMAP3430_AUTO_OFF_MASK				(1 << 2)
+#define OMAP3430_AUTO_RET_MASK				(1 << 1)
+#define OMAP3430_AUTO_SLEEP_MASK			(1 << 0)
 
 /* PRM_SRAM_PCHARGE */
 #define OMAP3430_PCHARGE_TIME_SHIFT			0
@@ -550,10 +550,10 @@
 #define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
 
 /* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL				(1 << 3)
-#define OMAP3430_CLKOUT_POL				(1 << 2)
-#define OMAP3430_CLKREQ_POL				(1 << 1)
-#define OMAP3430_EXTVOL_POL				(1 << 0)
+#define OMAP3430_OFFMODE_POL_MASK			(1 << 3)
+#define OMAP3430_CLKOUT_POL_MASK			(1 << 2)
+#define OMAP3430_CLKREQ_POL_MASK			(1 << 1)
+#define OMAP3430_EXTVOL_POL_MASK			(1 << 0)
 
 /* PRM_VOLTSETUP2 */
 #define OMAP3430_OFFMODESETUPTIME_SHIFT			0
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 301c810..597be4a 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -29,412 +29,412 @@
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				(1 << 1)
+#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				1
 #define OMAP4430_ABBOFF_ACT_EXPORT_MASK					BITFIELD(1, 1)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				(1 << 2)
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				2
 #define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				BITFIELD(2, 2)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					31
 #define OMAP4430_ABB_IVA_DONE_EN_MASK					BITFIELD(31, 31)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					31
 #define OMAP4430_ABB_IVA_DONE_ST_MASK					BITFIELD(31, 31)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					7
 #define OMAP4430_ABB_MPU_DONE_EN_MASK					BITFIELD(7, 7)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					7
 #define OMAP4430_ABB_MPU_DONE_ST_MASK					BITFIELD(7, 7)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					(1 << 2)
+#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					2
 #define OMAP4430_ACTIVE_FBB_SEL_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					(1 << 1)
+#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					1
 #define OMAP4430_ACTIVE_RBB_SEL_MASK					BITFIELD(1, 1)
 
 /* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_AESSMEM_ONSTATE_SHIFT					16
 #define OMAP4430_AESSMEM_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_AESSMEM_RETSTATE_SHIFT					8
 #define OMAP4430_AESSMEM_RETSTATE_MASK					BITFIELD(8, 8)
 
 /* Used by PM_ABE_PWRSTST */
-#define OMAP4430_AESSMEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_AESSMEM_STATEST_SHIFT					4
 #define OMAP4430_AESSMEM_STATEST_MASK					BITFIELD(4, 5)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_AIPOFF_SHIFT						(1 << 8)
+#define OMAP4430_AIPOFF_SHIFT						8
 #define OMAP4430_AIPOFF_MASK						BITFIELD(8, 8)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				0
 #define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				BITFIELD(0, 1)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				(1 << 4)
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				4
 #define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				BITFIELD(4, 5)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				(1 << 2)
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				2
 #define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				BITFIELD(2, 3)
 
 /* Used by PM_CAM_PWRSTCTRL */
-#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					16
 #define OMAP4430_CAM_MEM_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_CAM_PWRSTST */
-#define OMAP4430_CAM_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_CAM_MEM_STATEST_SHIFT					4
 #define OMAP4430_CAM_MEM_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by PRM_CLKREQCTRL */
-#define OMAP4430_CLKREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_CLKREQ_COND_SHIFT					0
 #define OMAP4430_CLKREQ_COND_MASK					BITFIELD(0, 2)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_CMDRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_CMDRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_CMDRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_CORE_L_SHIFT					(1 << 4)
+#define OMAP4430_CMD_VDD_CORE_L_SHIFT					4
 #define OMAP4430_CMD_VDD_CORE_L_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_IVA_L_SHIFT					(1 << 12)
+#define OMAP4430_CMD_VDD_IVA_L_SHIFT					12
 #define OMAP4430_CMD_VDD_IVA_L_MASK					BITFIELD(12, 12)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_MPU_L_SHIFT					(1 << 17)
+#define OMAP4430_CMD_VDD_MPU_L_SHIFT					17
 #define OMAP4430_CMD_VDD_MPU_L_MASK					BITFIELD(17, 17)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				18
 #define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				BITFIELD(18, 19)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				9
 #define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				BITFIELD(9, 9)
 
 /* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				6
 #define OMAP4430_CORE_OCMRAM_STATEST_MASK				BITFIELD(6, 7)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				16
 #define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				BITFIELD(16, 17)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				8
 #define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				BITFIELD(8, 8)
 
 /* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				4
 #define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				BITFIELD(4, 5)
 
 /* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_DATA_SHIFT						(1 << 16)
+#define OMAP4430_DATA_SHIFT						16
 #define OMAP4430_DATA_MASK						BITFIELD(16, 23)
 
 /* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				(1 << 0)
+#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				0
 #define OMAP4430_DEVICE_OFF_ENABLE_MASK					BITFIELD(0, 0)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_DFILTEREN_SHIFT					(1 << 6)
+#define OMAP4430_DFILTEREN_SHIFT					6
 #define OMAP4430_DFILTEREN_MASK						BITFIELD(6, 6)
 
 /* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				4
 #define OMAP4430_DPLL_ABE_RECAL_EN_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				4
 #define OMAP4430_DPLL_ABE_RECAL_ST_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				0
 #define OMAP4430_DPLL_CORE_RECAL_EN_MASK				BITFIELD(0, 0)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				0
 #define OMAP4430_DPLL_CORE_RECAL_ST_MASK				BITFIELD(0, 0)
 
 /* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				6
 #define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				BITFIELD(6, 6)
 
 /* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				6
 #define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				BITFIELD(6, 6)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				2
 #define OMAP4430_DPLL_IVA_RECAL_EN_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				2
 #define OMAP4430_DPLL_IVA_RECAL_ST_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				1
 #define OMAP4430_DPLL_MPU_RECAL_EN_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				1
 #define OMAP4430_DPLL_MPU_RECAL_ST_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				3
 #define OMAP4430_DPLL_PER_RECAL_EN_MASK					BITFIELD(3, 3)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				3
 #define OMAP4430_DPLL_PER_RECAL_ST_MASK					BITFIELD(3, 3)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				7
 #define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				BITFIELD(7, 7)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				7
 #define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				BITFIELD(7, 7)
 
 /* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT				5
 #define OMAP4430_DPLL_USB_RECAL_EN_MASK					BITFIELD(5, 5)
 
 /* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT				5
 #define OMAP4430_DPLL_USB_RECAL_ST_MASK					BITFIELD(5, 5)
 
 /* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					16
 #define OMAP4430_DSS_MEM_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					8
 #define OMAP4430_DSS_MEM_RETSTATE_MASK					BITFIELD(8, 8)
 
 /* Used by PM_DSS_PWRSTST */
-#define OMAP4430_DSS_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_DSS_MEM_STATEST_SHIFT					4
 #define OMAP4430_DSS_MEM_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				20
 #define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				BITFIELD(20, 21)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				10
 #define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				BITFIELD(10, 10)
 
 /* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				8
 #define OMAP4430_DUCATI_L2RAM_STATEST_MASK				BITFIELD(8, 9)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				(1 << 22)
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				22
 #define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				BITFIELD(22, 23)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				11
 #define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				BITFIELD(11, 11)
 
 /* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				10
 #define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				BITFIELD(10, 11)
 
 /* Used by RM_MPU_RSTST */
-#define OMAP4430_EMULATION_RST_SHIFT					(1 << 0)
+#define OMAP4430_EMULATION_RST_SHIFT					0
 #define OMAP4430_EMULATION_RST_MASK					BITFIELD(0, 0)
 
 /* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST1ST_SHIFT					(1 << 3)
+#define OMAP4430_EMULATION_RST1ST_SHIFT					3
 #define OMAP4430_EMULATION_RST1ST_MASK					BITFIELD(3, 3)
 
 /* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST2ST_SHIFT					(1 << 4)
+#define OMAP4430_EMULATION_RST2ST_SHIFT					4
 #define OMAP4430_EMULATION_RST2ST_MASK					BITFIELD(4, 4)
 
 /* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				(1 << 3)
+#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				3
 #define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				BITFIELD(3, 3)
 
 /* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				(1 << 4)
+#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				4
 #define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				BITFIELD(4, 4)
 
 /* Used by PM_EMU_PWRSTCTRL */
-#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					16
 #define OMAP4430_EMU_BANK_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_EMU_PWRSTST */
-#define OMAP4430_EMU_BANK_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_EMU_BANK_STATEST_SHIFT					4
 #define OMAP4430_EMU_BANK_STATEST_MASK					BITFIELD(4, 5)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
  */
-#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT				(1 << 0)
+#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT				0
 #define OMAP4430_ENABLE_RTA_EXPORT_MASK					BITFIELD(0, 0)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC1_SHIFT						(1 << 3)
+#define OMAP4430_ENFUNC1_SHIFT						3
 #define OMAP4430_ENFUNC1_MASK						BITFIELD(3, 3)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC3_SHIFT						(1 << 5)
+#define OMAP4430_ENFUNC3_SHIFT						5
 #define OMAP4430_ENFUNC3_MASK						BITFIELD(5, 5)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC4_SHIFT						(1 << 6)
+#define OMAP4430_ENFUNC4_SHIFT						6
 #define OMAP4430_ENFUNC4_MASK						BITFIELD(6, 6)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC5_SHIFT						(1 << 7)
+#define OMAP4430_ENFUNC5_SHIFT						7
 #define OMAP4430_ENFUNC5_MASK						BITFIELD(7, 7)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERRORGAIN_SHIFT					(1 << 16)
+#define OMAP4430_ERRORGAIN_SHIFT					16
 #define OMAP4430_ERRORGAIN_MASK						BITFIELD(16, 23)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERROROFFSET_SHIFT					(1 << 24)
+#define OMAP4430_ERROROFFSET_SHIFT					24
 #define OMAP4430_ERROROFFSET_MASK					BITFIELD(24, 31)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_EXTERNAL_WARM_RST_SHIFT				(1 << 5)
+#define OMAP4430_EXTERNAL_WARM_RST_SHIFT				5
 #define OMAP4430_EXTERNAL_WARM_RST_MASK					BITFIELD(5, 5)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_FORCEUPDATE_SHIFT					(1 << 1)
+#define OMAP4430_FORCEUPDATE_SHIFT					1
 #define OMAP4430_FORCEUPDATE_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_FORCEUPDATEWAIT_SHIFT					(1 << 8)
+#define OMAP4430_FORCEUPDATEWAIT_SHIFT					8
 #define OMAP4430_FORCEUPDATEWAIT_MASK					BITFIELD(8, 31)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
-#define OMAP4430_FORCEWKUP_EN_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_EN_SHIFT					10
 #define OMAP4430_FORCEWKUP_EN_MASK					BITFIELD(10, 10)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_FORCEWKUP_ST_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_ST_SHIFT					10
 #define OMAP4430_FORCEWKUP_ST_MASK					BITFIELD(10, 10)
 
 /* Used by PM_GFX_PWRSTCTRL */
-#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					16
 #define OMAP4430_GFX_MEM_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_GFX_PWRSTST */
-#define OMAP4430_GFX_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_GFX_MEM_STATEST_SHIFT					4
 #define OMAP4430_GFX_MEM_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_COLD_RST_SHIFT					(1 << 0)
+#define OMAP4430_GLOBAL_COLD_RST_SHIFT					0
 #define OMAP4430_GLOBAL_COLD_RST_MASK					BITFIELD(0, 0)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				(1 << 1)
+#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
 #define OMAP4430_GLOBAL_WARM_SW_RST_MASK				BITFIELD(1, 1)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_GLOBAL_WUEN_SHIFT					(1 << 16)
+#define OMAP4430_GLOBAL_WUEN_SHIFT					16
 #define OMAP4430_GLOBAL_WUEN_MASK					BITFIELD(16, 16)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMCODE_SHIFT						(1 << 0)
+#define OMAP4430_HSMCODE_SHIFT						0
 #define OMAP4430_HSMCODE_MASK						BITFIELD(0, 2)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMODEEN_SHIFT						(1 << 3)
+#define OMAP4430_HSMODEEN_SHIFT						3
 #define OMAP4430_HSMODEEN_MASK						BITFIELD(3, 3)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLH_SHIFT						(1 << 16)
+#define OMAP4430_HSSCLH_SHIFT						16
 #define OMAP4430_HSSCLH_MASK						BITFIELD(16, 23)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLL_SHIFT						(1 << 24)
+#define OMAP4430_HSSCLL_SHIFT						24
 #define OMAP4430_HSSCLL_MASK						BITFIELD(24, 31)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					16
 #define OMAP4430_HWA_MEM_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					8
 #define OMAP4430_HWA_MEM_RETSTATE_MASK					BITFIELD(8, 8)
 
 /* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_HWA_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_HWA_MEM_STATEST_SHIFT					4
 #define OMAP4430_HWA_MEM_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by RM_MPU_RSTST */
-#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				(1 << 1)
+#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				1
 #define OMAP4430_ICECRUSHER_MPU_RST_MASK				BITFIELD(1, 1)
 
 /* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				5
 #define OMAP4430_ICECRUSHER_RST1ST_MASK					BITFIELD(5, 5)
 
 /* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				6
 #define OMAP4430_ICECRUSHER_RST2ST_MASK					BITFIELD(6, 6)
 
 /* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				5
 #define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				BITFIELD(5, 5)
 
 /* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				6
 #define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				BITFIELD(6, 6)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_ICEPICK_RST_SHIFT					(1 << 9)
+#define OMAP4430_ICEPICK_RST_SHIFT					9
 #define OMAP4430_ICEPICK_RST_MASK					BITFIELD(9, 9)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVDD_SHIFT						(1 << 2)
+#define OMAP4430_INITVDD_SHIFT						2
 #define OMAP4430_INITVDD_MASK						BITFIELD(2, 2)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVOLTAGE_SHIFT					(1 << 8)
+#define OMAP4430_INITVOLTAGE_SHIFT					8
 #define OMAP4430_INITVOLTAGE_MASK					BITFIELD(8, 15)
 
 /*
@@ -442,47 +442,47 @@
  * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
  * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
  */
-#define OMAP4430_INTRANSITION_SHIFT					(1 << 20)
+#define OMAP4430_INTRANSITION_SHIFT					20
 #define OMAP4430_INTRANSITION_MASK					BITFIELD(20, 20)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_IO_EN_SHIFT						(1 << 9)
+#define OMAP4430_IO_EN_SHIFT						9
 #define OMAP4430_IO_EN_MASK						BITFIELD(9, 9)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_IO_ON_STATUS_SHIFT					(1 << 5)
+#define OMAP4430_IO_ON_STATUS_SHIFT					5
 #define OMAP4430_IO_ON_STATUS_MASK					BITFIELD(5, 5)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_IO_ST_SHIFT						(1 << 9)
+#define OMAP4430_IO_ST_SHIFT						9
 #define OMAP4430_IO_ST_MASK						BITFIELD(9, 9)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					(1 << 0)
+#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					0
 #define OMAP4430_ISOCLK_OVERRIDE_MASK					BITFIELD(0, 0)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_STATUS_SHIFT					(1 << 1)
+#define OMAP4430_ISOCLK_STATUS_SHIFT					1
 #define OMAP4430_ISOCLK_STATUS_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOOVR_EXTEND_SHIFT					(1 << 4)
+#define OMAP4430_ISOOVR_EXTEND_SHIFT					4
 #define OMAP4430_ISOOVR_EXTEND_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_IO_COUNT */
-#define OMAP4430_ISO_2_ON_TIME_SHIFT					(1 << 0)
+#define OMAP4430_ISO_2_ON_TIME_SHIFT					0
 #define OMAP4430_ISO_2_ON_TIME_MASK					BITFIELD(0, 7)
 
 /* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				16
 #define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				BITFIELD(16, 17)
 
 /* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				8
 #define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				BITFIELD(8, 8)
 
 /* Used by PM_L3INIT_PWRSTST */
-#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				4
 #define OMAP4430_L3INIT_BANK1_STATEST_MASK				BITFIELD(4, 5)
 
 /*
@@ -490,7 +490,7 @@
  * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL,
  * PM_IVAHD_PWRSTCTRL
  */
-#define OMAP4430_LOGICRETSTATE_SHIFT					(1 << 2)
+#define OMAP4430_LOGICRETSTATE_SHIFT					2
 #define OMAP4430_LOGICRETSTATE_MASK					BITFIELD(2, 2)
 
 /*
@@ -498,7 +498,7 @@
  * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
  * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
  */
-#define OMAP4430_LOGICSTATEST_SHIFT					(1 << 2)
+#define OMAP4430_LOGICSTATEST_SHIFT					2
 #define OMAP4430_LOGICSTATEST_MASK					BITFIELD(2, 2)
 
 /*
@@ -537,7 +537,7 @@
  * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT,
  * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT
  */
-#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					(1 << 0)
+#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					0
 #define OMAP4430_LOSTCONTEXT_DFF_MASK					BITFIELD(0, 0)
 
 /*
@@ -558,58 +558,58 @@
  * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT,
  * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT
  */
-#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					(1 << 1)
+#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					1
 #define OMAP4430_LOSTCONTEXT_RFF_MASK					BITFIELD(1, 1)
 
 /* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					8
 #define OMAP4430_LOSTMEM_AESSMEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					8
 #define OMAP4430_LOSTMEM_CAM_MEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				8
 #define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				BITFIELD(8, 8)
 
 /* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			(1 << 9)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			9
 #define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			BITFIELD(9, 9)
 
 /* Used by RM_L3_2_OCMC_RAM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				8
 #define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				BITFIELD(8, 8)
 
 /*
  * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
  * RM_SDMA_SDMA_CONTEXT
  */
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				8
 #define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				BITFIELD(8, 8)
 
 /* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					8
 #define OMAP4430_LOSTMEM_DSS_MEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				(1 << 9)
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				9
 #define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				BITFIELD(9, 9)
 
 /* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				8
 #define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				BITFIELD(8, 8)
 
 /* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					8
 #define OMAP4430_LOSTMEM_EMU_BANK_MASK					BITFIELD(8, 8)
 
 /* Used by RM_GFX_GFX_CONTEXT */
-#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					8
 #define OMAP4430_LOSTMEM_GFX_MEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					10
 #define OMAP4430_LOSTMEM_HWA_MEM_MASK					BITFIELD(10, 10)
 
 /*
@@ -619,19 +619,19 @@
  * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
  * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
  */
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				8
 #define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				BITFIELD(8, 8)
 
 /* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					8
 #define OMAP4430_LOSTMEM_MPU_L1_MASK					BITFIELD(8, 8)
 
 /* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					9
 #define OMAP4430_LOSTMEM_MPU_L2_MASK					BITFIELD(9, 9)
 
 /* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					10
 #define OMAP4430_LOSTMEM_MPU_RAM_MASK					BITFIELD(10, 10)
 
 /*
@@ -639,14 +639,14 @@
  * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
  * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
  */
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				8
 #define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				BITFIELD(8, 8)
 
 /*
  * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
  * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
  */
-#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				8
 #define OMAP4430_LOSTMEM_PERIHPMEM_MASK					BITFIELD(8, 8)
 
 /*
@@ -654,35 +654,35 @@
  * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
  * RM_L4SEC_CRYPTODMA_CONTEXT
  */
-#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				8
 #define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				BITFIELD(8, 8)
 
 /* Used by RM_IVAHD_SL2_CONTEXT */
-#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					8
 #define OMAP4430_LOSTMEM_SL2_MEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					8
 #define OMAP4430_LOSTMEM_TCM1_MEM_MASK					BITFIELD(8, 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					9
 #define OMAP4430_LOSTMEM_TCM2_MEM_MASK					BITFIELD(9, 9)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				(1 << 10)
+#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				10
 #define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				BITFIELD(10, 10)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					8
 #define OMAP4430_LOSTMEM_TESLA_L1_MASK					BITFIELD(8, 8)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					9
 #define OMAP4430_LOSTMEM_TESLA_L2_MASK					BITFIELD(9, 9)
 
 /* Used by RM_WKUP_SARRAM_CONTEXT */
-#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				8
 #define OMAP4430_LOSTMEM_WKUP_BANK_MASK					BITFIELD(8, 8)
 
 /*
@@ -690,164 +690,164 @@
  * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
  * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
  */
-#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				(1 << 4)
+#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				4
 #define OMAP4430_LOWPOWERSTATECHANGE_MASK				BITFIELD(4, 4)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_MEMORYCHANGE_SHIFT					(1 << 3)
+#define OMAP4430_MEMORYCHANGE_SHIFT					3
 #define OMAP4430_MEMORYCHANGE_MASK					BITFIELD(3, 3)
 
 /* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_READY_SHIFT					(1 << 1)
+#define OMAP4430_MODEM_READY_SHIFT					1
 #define OMAP4430_MODEM_READY_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				(1 << 9)
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				9
 #define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				BITFIELD(9, 9)
 
 /* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SLEEP_ST_SHIFT					(1 << 16)
+#define OMAP4430_MODEM_SLEEP_ST_SHIFT					16
 #define OMAP4430_MODEM_SLEEP_ST_MASK					BITFIELD(16, 16)
 
 /* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					(1 << 8)
+#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					8
 #define OMAP4430_MODEM_WAKE_IRQ_MASK					BITFIELD(8, 8)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_MPU_L1_ONSTATE_SHIFT					16
 #define OMAP4430_MPU_L1_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_MPU_L1_RETSTATE_SHIFT					8
 #define OMAP4430_MPU_L1_RETSTATE_MASK					BITFIELD(8, 8)
 
 /* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_MPU_L1_STATEST_SHIFT					4
 #define OMAP4430_MPU_L1_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_MPU_L2_ONSTATE_SHIFT					18
 #define OMAP4430_MPU_L2_ONSTATE_MASK					BITFIELD(18, 19)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_MPU_L2_RETSTATE_SHIFT					9
 #define OMAP4430_MPU_L2_RETSTATE_MASK					BITFIELD(9, 9)
 
 /* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_MPU_L2_STATEST_SHIFT					6
 #define OMAP4430_MPU_L2_STATEST_MASK					BITFIELD(6, 7)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					20
 #define OMAP4430_MPU_RAM_ONSTATE_MASK					BITFIELD(20, 21)
 
 /* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					(1 << 10)
+#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					10
 #define OMAP4430_MPU_RAM_RETSTATE_MASK					BITFIELD(10, 10)
 
 /* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_RAM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_MPU_RAM_STATEST_SHIFT					8
 #define OMAP4430_MPU_RAM_STATEST_MASK					BITFIELD(8, 9)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				(1 << 2)
+#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				2
 #define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				BITFIELD(2, 2)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_MPU_WDT_RST_SHIFT					(1 << 3)
+#define OMAP4430_MPU_WDT_RST_SHIFT					3
 #define OMAP4430_MPU_WDT_RST_MASK					BITFIELD(3, 3)
 
 /* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				18
 #define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				BITFIELD(18, 19)
 
 /* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			(1 << 9)
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			9
 #define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				BITFIELD(9, 9)
 
 /* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				6
 #define OMAP4430_NONRETAINED_BANK_STATEST_MASK				BITFIELD(6, 7)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				(1 << 24)
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				24
 #define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				BITFIELD(24, 25)
 
 /* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				BITFIELD(12, 12)
 
 /* Used by PM_CORE_PWRSTST */
-#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_STATEST_MASK				BITFIELD(12, 13)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
-#define OMAP4430_OFF_SHIFT						(1 << 0)
+#define OMAP4430_OFF_SHIFT						0
 #define OMAP4430_OFF_MASK						BITFIELD(0, 7)
 
 /* Used by PRM_LDO_BANDGAP_CTRL */
-#define OMAP4430_OFF_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_OFF_ENABLE_SHIFT					0
 #define OMAP4430_OFF_ENABLE_MASK					BITFIELD(0, 0)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
-#define OMAP4430_ON_SHIFT						(1 << 24)
+#define OMAP4430_ON_SHIFT						24
 #define OMAP4430_ON_MASK						BITFIELD(24, 31)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
-#define OMAP4430_ONLP_SHIFT						(1 << 16)
+#define OMAP4430_ONLP_SHIFT						16
 #define OMAP4430_ONLP_MASK						BITFIELD(16, 23)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_CHANGE_SHIFT					(1 << 2)
+#define OMAP4430_OPP_CHANGE_SHIFT					2
 #define OMAP4430_OPP_CHANGE_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_SEL_SHIFT						(1 << 0)
+#define OMAP4430_OPP_SEL_SHIFT						0
 #define OMAP4430_OPP_SEL_MASK						BITFIELD(0, 1)
 
 /* Used by PRM_SRAM_COUNT */
-#define OMAP4430_PCHARGECNT_VALUE_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGECNT_VALUE_SHIFT					0
 #define OMAP4430_PCHARGECNT_VALUE_MASK					BITFIELD(0, 5)
 
 /* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PCHARGE_TIME_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGE_TIME_SHIFT					0
 #define OMAP4430_PCHARGE_TIME_MASK					BITFIELD(0, 7)
 
 /* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				20
 #define OMAP4430_PERIPHMEM_ONSTATE_MASK					BITFIELD(20, 21)
 
 /* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				10
 #define OMAP4430_PERIPHMEM_RETSTATE_MASK				BITFIELD(10, 10)
 
 /* Used by PM_ABE_PWRSTST */
-#define OMAP4430_PERIPHMEM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_PERIPHMEM_STATEST_SHIFT				8
 #define OMAP4430_PERIPHMEM_STATEST_MASK					BITFIELD(8, 9)
 
 /* Used by PRM_PHASE1_CNDP */
-#define OMAP4430_PHASE1_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE1_CNDP_SHIFT					0
 #define OMAP4430_PHASE1_CNDP_MASK					BITFIELD(0, 31)
 
 /* Used by PRM_PHASE2A_CNDP */
-#define OMAP4430_PHASE2A_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2A_CNDP_SHIFT					0
 #define OMAP4430_PHASE2A_CNDP_MASK					BITFIELD(0, 31)
 
 /* Used by PRM_PHASE2B_CNDP */
-#define OMAP4430_PHASE2B_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2B_CNDP_SHIFT					0
 #define OMAP4430_PHASE2B_CNDP_MASK					BITFIELD(0, 31)
 
 /* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				(1 << 8)
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				8
 #define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				BITFIELD(8, 15)
 
 /*
@@ -856,7 +856,7 @@
  * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
  * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
  */
-#define OMAP4430_POWERSTATE_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATE_SHIFT					0
 #define OMAP4430_POWERSTATE_MASK					BITFIELD(0, 1)
 
 /*
@@ -864,35 +864,35 @@
  * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
  * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
  */
-#define OMAP4430_POWERSTATEST_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATEST_SHIFT					0
 #define OMAP4430_POWERSTATEST_MASK					BITFIELD(0, 1)
 
 /* Used by PRM_PWRREQCTRL */
-#define OMAP4430_PWRREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_PWRREQ_COND_SHIFT					0
 #define OMAP4430_PWRREQ_COND_MASK					BITFIELD(0, 1)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					(1 << 3)
+#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					3
 #define OMAP4430_RACEN_VDD_CORE_L_MASK					BITFIELD(3, 3)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					(1 << 11)
+#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					11
 #define OMAP4430_RACEN_VDD_IVA_L_MASK					BITFIELD(11, 11)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					(1 << 20)
+#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					20
 #define OMAP4430_RACEN_VDD_MPU_L_MASK					BITFIELD(20, 20)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_CORE_L_SHIFT					(1 << 2)
+#define OMAP4430_RAC_VDD_CORE_L_SHIFT					2
 #define OMAP4430_RAC_VDD_CORE_L_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_IVA_L_SHIFT					(1 << 10)
+#define OMAP4430_RAC_VDD_IVA_L_SHIFT					10
 #define OMAP4430_RAC_VDD_IVA_L_MASK					BITFIELD(10, 10)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_MPU_L_SHIFT					(1 << 19)
+#define OMAP4430_RAC_VDD_MPU_L_SHIFT					19
 #define OMAP4430_RAC_VDD_MPU_L_MASK					BITFIELD(19, 19)
 
 /*
@@ -900,7 +900,7 @@
  * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
-#define OMAP4430_RAMP_DOWN_COUNT_SHIFT					(1 << 16)
+#define OMAP4430_RAMP_DOWN_COUNT_SHIFT					16
 #define OMAP4430_RAMP_DOWN_COUNT_MASK					BITFIELD(16, 21)
 
 /*
@@ -908,7 +908,7 @@
  * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
-#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				(1 << 24)
+#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				24
 #define OMAP4430_RAMP_DOWN_PRESCAL_MASK					BITFIELD(24, 25)
 
 /*
@@ -916,7 +916,7 @@
  * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
-#define OMAP4430_RAMP_UP_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_RAMP_UP_COUNT_SHIFT					0
 #define OMAP4430_RAMP_UP_COUNT_MASK					BITFIELD(0, 5)
 
 /*
@@ -924,1282 +924,1282 @@
  * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
-#define OMAP4430_RAMP_UP_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_RAMP_UP_PRESCAL_SHIFT					8
 #define OMAP4430_RAMP_UP_PRESCAL_MASK					BITFIELD(8, 9)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_CORE_L_SHIFT					(1 << 1)
+#define OMAP4430_RAV_VDD_CORE_L_SHIFT					1
 #define OMAP4430_RAV_VDD_CORE_L_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_IVA_L_SHIFT					(1 << 9)
+#define OMAP4430_RAV_VDD_IVA_L_SHIFT					9
 #define OMAP4430_RAV_VDD_IVA_L_MASK					BITFIELD(9, 9)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_MPU_L_SHIFT					(1 << 18)
+#define OMAP4430_RAV_VDD_MPU_L_SHIFT					18
 #define OMAP4430_RAV_VDD_MPU_L_MASK					BITFIELD(18, 18)
 
 /* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_REGADDR_SHIFT						(1 << 8)
+#define OMAP4430_REGADDR_SHIFT						8
 #define OMAP4430_REGADDR_MASK						BITFIELD(8, 15)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
-#define OMAP4430_RET_SHIFT						(1 << 8)
+#define OMAP4430_RET_SHIFT						8
 #define OMAP4430_RET_MASK						BITFIELD(8, 15)
 
 /* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				16
 #define OMAP4430_RETAINED_BANK_ONSTATE_MASK				BITFIELD(16, 17)
 
 /* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				8
 #define OMAP4430_RETAINED_BANK_RETSTATE_MASK				BITFIELD(8, 8)
 
 /* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				4
 #define OMAP4430_RETAINED_BANK_STATEST_MASK				BITFIELD(4, 5)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
-#define OMAP4430_RETMODE_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_RETMODE_ENABLE_SHIFT					0
 #define OMAP4430_RETMODE_ENABLE_MASK					BITFIELD(0, 0)
 
 /* Used by REVISION_PRM */
-#define OMAP4430_REV_SHIFT						(1 << 0)
+#define OMAP4430_REV_SHIFT						0
 #define OMAP4430_REV_MASK						BITFIELD(0, 7)
 
 /* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST1_SHIFT						(1 << 0)
+#define OMAP4430_RST1_SHIFT						0
 #define OMAP4430_RST1_MASK						BITFIELD(0, 0)
 
 /* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST1ST_SHIFT						(1 << 0)
+#define OMAP4430_RST1ST_SHIFT						0
 #define OMAP4430_RST1ST_MASK						BITFIELD(0, 0)
 
 /* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST2_SHIFT						(1 << 1)
+#define OMAP4430_RST2_SHIFT						1
 #define OMAP4430_RST2_MASK						BITFIELD(1, 1)
 
 /* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST2ST_SHIFT						(1 << 1)
+#define OMAP4430_RST2ST_SHIFT						1
 #define OMAP4430_RST2ST_MASK						BITFIELD(1, 1)
 
 /* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST3_SHIFT						(1 << 2)
+#define OMAP4430_RST3_SHIFT						2
 #define OMAP4430_RST3_MASK						BITFIELD(2, 2)
 
 /* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST3ST_SHIFT						(1 << 2)
+#define OMAP4430_RST3ST_SHIFT						2
 #define OMAP4430_RST3ST_MASK						BITFIELD(2, 2)
 
 /* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME1_SHIFT						(1 << 0)
+#define OMAP4430_RSTTIME1_SHIFT						0
 #define OMAP4430_RSTTIME1_MASK						BITFIELD(0, 9)
 
 /* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME2_SHIFT						(1 << 10)
+#define OMAP4430_RSTTIME2_SHIFT						10
 #define OMAP4430_RSTTIME2_MASK						BITFIELD(10, 14)
 
 /* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				(1 << 1)
+#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				1
 #define OMAP4430_RST_GLOBAL_COLD_SW_MASK				BITFIELD(1, 1)
 
 /* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				(1 << 0)
+#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				0
 #define OMAP4430_RST_GLOBAL_WARM_SW_MASK				BITFIELD(0, 0)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_SA_VDD_CORE_L_MASK					BITFIELD(0, 0)
 
 /* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				0
 #define OMAP4430_SA_VDD_CORE_L_0_6_MASK					BITFIELD(0, 6)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_SA_VDD_IVA_L_MASK					BITFIELD(8, 8)
 
 /* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			8
 #define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			BITFIELD(8, 14)
 
 /* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_SA_VDD_MPU_L_MASK					BITFIELD(16, 16)
 
 /* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			16
 #define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			BITFIELD(16, 22)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLH_SHIFT						(1 << 0)
+#define OMAP4430_SCLH_SHIFT						0
 #define OMAP4430_SCLH_MASK						BITFIELD(0, 7)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLL_SHIFT						(1 << 8)
+#define OMAP4430_SCLL_SHIFT						8
 #define OMAP4430_SCLL_MASK						BITFIELD(8, 15)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_SECURE_WDT_RST_SHIFT					(1 << 4)
+#define OMAP4430_SECURE_WDT_RST_SHIFT					4
 #define OMAP4430_SECURE_WDT_RST_MASK					BITFIELD(4, 4)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					18
 #define OMAP4430_SL2_MEM_ONSTATE_MASK					BITFIELD(18, 19)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					9
 #define OMAP4430_SL2_MEM_RETSTATE_MASK					BITFIELD(9, 9)
 
 /* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_SL2_MEM_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_SL2_MEM_STATEST_SHIFT					6
 #define OMAP4430_SL2_MEM_STATEST_MASK					BITFIELD(6, 7)
 
 /* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_SLAVEADDR_SHIFT					(1 << 0)
+#define OMAP4430_SLAVEADDR_SHIFT					0
 #define OMAP4430_SLAVEADDR_MASK						BITFIELD(0, 6)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SLEEP_RBB_SEL_SHIFT					(1 << 3)
+#define OMAP4430_SLEEP_RBB_SEL_SHIFT					3
 #define OMAP4430_SLEEP_RBB_SEL_MASK					BITFIELD(3, 3)
 
 /* Used by PRM_SRAM_COUNT */
-#define OMAP4430_SLPCNT_VALUE_SHIFT					(1 << 16)
+#define OMAP4430_SLPCNT_VALUE_SHIFT					16
 #define OMAP4430_SLPCNT_VALUE_MASK					BITFIELD(16, 23)
 
 /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_SMPSWAITTIMEMAX_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMAX_SHIFT					8
 #define OMAP4430_SMPSWAITTIMEMAX_MASK					BITFIELD(8, 23)
 
 /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_SMPSWAITTIMEMIN_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMIN_SHIFT					8
 #define OMAP4430_SMPSWAITTIMEMIN_MASK					BITFIELD(8, 23)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2EN_SHIFT						(1 << 0)
+#define OMAP4430_SR2EN_SHIFT						0
 #define OMAP4430_SR2EN_MASK						BITFIELD(0, 0)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_IN_TRANSITION_SHIFT				(1 << 6)
+#define OMAP4430_SR2_IN_TRANSITION_SHIFT				6
 #define OMAP4430_SR2_IN_TRANSITION_MASK					BITFIELD(6, 6)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_STATUS_SHIFT					(1 << 3)
+#define OMAP4430_SR2_STATUS_SHIFT					3
 #define OMAP4430_SR2_STATUS_MASK					BITFIELD(3, 4)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					8
 #define OMAP4430_SR2_WTCNT_VALUE_MASK					BITFIELD(8, 15)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
-#define OMAP4430_SRAMLDO_STATUS_SHIFT					(1 << 8)
+#define OMAP4430_SRAMLDO_STATUS_SHIFT					8
 #define OMAP4430_SRAMLDO_STATUS_MASK					BITFIELD(8, 8)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
-#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				(1 << 9)
+#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				9
 #define OMAP4430_SRAM_IN_TRANSITION_MASK				BITFIELD(9, 9)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_SRMODEEN_SHIFT						(1 << 4)
+#define OMAP4430_SRMODEEN_SHIFT						4
 #define OMAP4430_SRMODEEN_MASK						BITFIELD(4, 4)
 
 /* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_STABLE_COUNT_SHIFT					0
 #define OMAP4430_STABLE_COUNT_MASK					BITFIELD(0, 5)
 
 /* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_STABLE_PRESCAL_SHIFT					8
 #define OMAP4430_STABLE_PRESCAL_MASK					BITFIELD(8, 9)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					20
 #define OMAP4430_TCM1_MEM_ONSTATE_MASK					BITFIELD(20, 21)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				10
 #define OMAP4430_TCM1_MEM_RETSTATE_MASK					BITFIELD(10, 10)
 
 /* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM1_MEM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_TCM1_MEM_STATEST_SHIFT					8
 #define OMAP4430_TCM1_MEM_STATEST_MASK					BITFIELD(8, 9)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					(1 << 22)
+#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					22
 #define OMAP4430_TCM2_MEM_ONSTATE_MASK					BITFIELD(22, 23)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				11
 #define OMAP4430_TCM2_MEM_RETSTATE_MASK					BITFIELD(11, 11)
 
 /* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM2_MEM_STATEST_SHIFT					(1 << 10)
+#define OMAP4430_TCM2_MEM_STATEST_SHIFT					10
 #define OMAP4430_TCM2_MEM_STATEST_MASK					BITFIELD(10, 11)
 
 /* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				(1 << 2)
+#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				2
 #define OMAP4430_TESLASS_EMU_RSTST_MASK					BITFIELD(2, 2)
 
 /* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				(1 << 3)
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				3
 #define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				BITFIELD(3, 3)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				20
 #define OMAP4430_TESLA_EDMA_ONSTATE_MASK				BITFIELD(20, 21)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				10
 #define OMAP4430_TESLA_EDMA_RETSTATE_MASK				BITFIELD(10, 10)
 
 /* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				8
 #define OMAP4430_TESLA_EDMA_STATEST_MASK				BITFIELD(8, 9)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					16
 #define OMAP4430_TESLA_L1_ONSTATE_MASK					BITFIELD(16, 17)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				8
 #define OMAP4430_TESLA_L1_RETSTATE_MASK					BITFIELD(8, 8)
 
 /* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_TESLA_L1_STATEST_SHIFT					4
 #define OMAP4430_TESLA_L1_STATEST_MASK					BITFIELD(4, 5)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					18
 #define OMAP4430_TESLA_L2_ONSTATE_MASK					BITFIELD(18, 19)
 
 /* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				9
 #define OMAP4430_TESLA_L2_RETSTATE_MASK					BITFIELD(9, 9)
 
 /* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_TESLA_L2_STATEST_SHIFT					6
 #define OMAP4430_TESLA_L2_STATEST_MASK					BITFIELD(6, 7)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_TIMEOUT_SHIFT						(1 << 0)
+#define OMAP4430_TIMEOUT_SHIFT						0
 #define OMAP4430_TIMEOUT_MASK						BITFIELD(0, 15)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_TIMEOUTEN_SHIFT					(1 << 3)
+#define OMAP4430_TIMEOUTEN_SHIFT					3
 #define OMAP4430_TIMEOUTEN_MASK						BITFIELD(3, 3)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_TRANSITION_EN_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_EN_SHIFT					8
 #define OMAP4430_TRANSITION_EN_MASK					BITFIELD(8, 8)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_TRANSITION_ST_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_ST_SHIFT					8
 #define OMAP4430_TRANSITION_ST_MASK					BITFIELD(8, 8)
 
 /* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_VALID_SHIFT						(1 << 24)
+#define OMAP4430_VALID_SHIFT						24
 #define OMAP4430_VALID_MASK						BITFIELD(24, 24)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_BYPASSACK_EN_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_EN_SHIFT					14
 #define OMAP4430_VC_BYPASSACK_EN_MASK					BITFIELD(14, 14)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_BYPASSACK_ST_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_ST_SHIFT					14
 #define OMAP4430_VC_BYPASSACK_ST_MASK					BITFIELD(14, 14)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					30
 #define OMAP4430_VC_IVA_VPACK_EN_MASK					BITFIELD(30, 30)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					30
 #define OMAP4430_VC_IVA_VPACK_ST_MASK					BITFIELD(30, 30)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					6
 #define OMAP4430_VC_MPU_VPACK_EN_MASK					BITFIELD(6, 6)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					6
 #define OMAP4430_VC_MPU_VPACK_ST_MASK					BITFIELD(6, 6)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_RAERR_EN_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_EN_SHIFT					12
 #define OMAP4430_VC_RAERR_EN_MASK					BITFIELD(12, 12)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_RAERR_ST_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_ST_SHIFT					12
 #define OMAP4430_VC_RAERR_ST_MASK					BITFIELD(12, 12)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_SAERR_EN_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_EN_SHIFT					11
 #define OMAP4430_VC_SAERR_EN_MASK					BITFIELD(11, 11)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_SAERR_ST_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_ST_SHIFT					11
 #define OMAP4430_VC_SAERR_ST_MASK					BITFIELD(11, 11)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_TOERR_EN_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_EN_SHIFT					13
 #define OMAP4430_VC_TOERR_EN_MASK					BITFIELD(13, 13)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_TOERR_ST_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_ST_SHIFT					13
 #define OMAP4430_VC_TOERR_ST_MASK					BITFIELD(13, 13)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMAX_SHIFT						(1 << 24)
+#define OMAP4430_VDDMAX_SHIFT						24
 #define OMAP4430_VDDMAX_MASK						BITFIELD(24, 31)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMIN_SHIFT						(1 << 16)
+#define OMAP4430_VDDMIN_SHIFT						16
 #define OMAP4430_VDDMIN_MASK						BITFIELD(16, 23)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				(1 << 12)
+#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				12
 #define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				BITFIELD(12, 12)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				(1 << 8)
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				8
 #define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				BITFIELD(8, 8)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				(1 << 14)
+#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				14
 #define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				BITFIELD(14, 14)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					(1 << 9)
+#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					9
 #define OMAP4430_VDD_IVA_PRESENCE_MASK					BITFIELD(9, 9)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				(1 << 7)
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				7
 #define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				BITFIELD(7, 7)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				(1 << 13)
+#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				13
 #define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				BITFIELD(13, 13)
 
 /* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					(1 << 8)
+#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					8
 #define OMAP4430_VDD_MPU_PRESENCE_MASK					BITFIELD(8, 8)
 
 /* Used by PRM_RSTST */
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				(1 << 6)
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				6
 #define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				BITFIELD(6, 6)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_VOLRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_VOLRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_VOLRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_VPENABLE_SHIFT						(1 << 0)
+#define OMAP4430_VPENABLE_SHIFT						0
 #define OMAP4430_VPENABLE_MASK						BITFIELD(0, 0)
 
 /* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP4430_VPINIDLE_SHIFT						(1 << 0)
+#define OMAP4430_VPINIDLE_SHIFT						0
 #define OMAP4430_VPINIDLE_MASK						BITFIELD(0, 0)
 
 /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_VPVOLTAGE_SHIFT					(1 << 0)
+#define OMAP4430_VPVOLTAGE_SHIFT					0
 #define OMAP4430_VPVOLTAGE_MASK						BITFIELD(0, 7)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				20
 #define OMAP4430_VP_CORE_EQVALUE_EN_MASK				BITFIELD(20, 20)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				20
 #define OMAP4430_VP_CORE_EQVALUE_ST_MASK				BITFIELD(20, 20)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				18
 #define OMAP4430_VP_CORE_MAXVDD_EN_MASK					BITFIELD(18, 18)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				18
 #define OMAP4430_VP_CORE_MAXVDD_ST_MASK					BITFIELD(18, 18)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				17
 #define OMAP4430_VP_CORE_MINVDD_EN_MASK					BITFIELD(17, 17)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				17
 #define OMAP4430_VP_CORE_MINVDD_ST_MASK					BITFIELD(17, 17)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				19
 #define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				BITFIELD(19, 19)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				19
 #define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				BITFIELD(19, 19)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				16
 #define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				BITFIELD(16, 16)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				16
 #define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				BITFIELD(16, 16)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				21
 #define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				BITFIELD(21, 21)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				21
 #define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				BITFIELD(21, 21)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				28
 #define OMAP4430_VP_IVA_EQVALUE_EN_MASK					BITFIELD(28, 28)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				28
 #define OMAP4430_VP_IVA_EQVALUE_ST_MASK					BITFIELD(28, 28)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					26
 #define OMAP4430_VP_IVA_MAXVDD_EN_MASK					BITFIELD(26, 26)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					26
 #define OMAP4430_VP_IVA_MAXVDD_ST_MASK					BITFIELD(26, 26)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					25
 #define OMAP4430_VP_IVA_MINVDD_EN_MASK					BITFIELD(25, 25)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					25
 #define OMAP4430_VP_IVA_MINVDD_ST_MASK					BITFIELD(25, 25)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				27
 #define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				BITFIELD(27, 27)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				27
 #define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				BITFIELD(27, 27)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				24
 #define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				BITFIELD(24, 24)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				24
 #define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				BITFIELD(24, 24)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				29
 #define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				BITFIELD(29, 29)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				29
 #define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				BITFIELD(29, 29)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				4
 #define OMAP4430_VP_MPU_EQVALUE_EN_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				4
 #define OMAP4430_VP_MPU_EQVALUE_ST_MASK					BITFIELD(4, 4)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					2
 #define OMAP4430_VP_MPU_MAXVDD_EN_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					2
 #define OMAP4430_VP_MPU_MAXVDD_ST_MASK					BITFIELD(2, 2)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					1
 #define OMAP4430_VP_MPU_MINVDD_EN_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					1
 #define OMAP4430_VP_MPU_MINVDD_ST_MASK					BITFIELD(1, 1)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				3
 #define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				BITFIELD(3, 3)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				3
 #define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				BITFIELD(3, 3)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				0
 #define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				BITFIELD(0, 0)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				0
 #define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				BITFIELD(0, 0)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				5
 #define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				BITFIELD(5, 5)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				5
 #define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				BITFIELD(5, 5)
 
 /* Used by PRM_SRAM_COUNT */
-#define OMAP4430_VSETUPCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_VSETUPCNT_VALUE_SHIFT					8
 #define OMAP4430_VSETUPCNT_VALUE_MASK					BITFIELD(8, 15)
 
 /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_VSTEPMAX_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMAX_SHIFT						0
 #define OMAP4430_VSTEPMAX_MASK						BITFIELD(0, 7)
 
 /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_VSTEPMIN_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMIN_SHIFT						0
 #define OMAP4430_VSTEPMIN_MASK						BITFIELD(0, 7)
 
 /* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_WAKE_MODEM_SHIFT					(1 << 0)
+#define OMAP4430_WAKE_MODEM_SHIFT					0
 #define OMAP4430_WAKE_MODEM_MASK					BITFIELD(0, 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DISPC_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_DMTIMER10_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_DMTIMER2_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				(1 << 5)
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				5
 #define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				BITFIELD(5, 5)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					(1 << 4)
+#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					4
 #define OMAP4430_WKUPDEP_DSI1_MPU_MASK					BITFIELD(4, 4)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					BITFIELD(7, 7)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				(1 << 9)
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				9
 #define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				BITFIELD(9, 9)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					(1 << 8)
+#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					8
 #define OMAP4430_WKUPDEP_DSI2_MPU_MASK					BITFIELD(8, 8)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				(1 << 11)
+#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				11
 #define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					BITFIELD(11, 11)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				(1 << 10)
+#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				10
 #define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				BITFIELD(10, 10)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			1
 #define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			1
 #define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				(1 << 19)
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				19
 #define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				BITFIELD(19, 19)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				(1 << 13)
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				13
 #define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				BITFIELD(13, 13)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				(1 << 12)
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				12
 #define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				BITFIELD(12, 12)
 
 /* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				(1 << 14)
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				14
 #define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				BITFIELD(14, 14)
 
 /* Used by PM_L4PER_HECC1_WKDEP */
-#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_HECC1_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L4PER_HECC2_WKDEP */
-#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_HECC2_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_WKUP_KEYBOARD_WKDEP */
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_MMC1_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					BITFIELD(3, 3)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_MMC2_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					BITFIELD(3, 3)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_MMC6_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				7
 #define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				6
 #define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				BITFIELD(6, 6)
 
 /* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_WKUP_RTC_WKDEP */
-#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_RTC_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_SATA_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_SATA_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			7
 #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			6
 #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			BITFIELD(6, 6)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			2
 #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			BITFIELD(2, 2)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			7
 #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				BITFIELD(7, 7)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			6
 #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			BITFIELD(6, 6)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			2
 #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			BITFIELD(2, 2)
 
 /* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ALWON_SR_MPU_WKDEP */
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_WKUP_TIMER12_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_WKUP_TIMER1_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_UART1_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_UART1_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_UART2_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_UART2_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_UART3_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_UART3_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				2
 #define OMAP4430_WKUPDEP_UART3_TESLA_MASK				BITFIELD(2, 2)
 
 /* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_UART4_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_UART4_SDMA_MASK				BITFIELD(3, 3)
 
 /* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			1
 #define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				0
 #define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				BITFIELD(0, 0)
 
 /* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_USIM_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				3
 #define OMAP4430_WKUPDEP_USIM_SDMA_MASK					BITFIELD(3, 3)
 
 /* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_WDT2_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_ABE_WDT3_WKDEP */
-#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					0
 #define OMAP4430_WKUPDEP_WDT3_MPU_MASK					BITFIELD(0, 0)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				(1 << 8)
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				8
 #define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				BITFIELD(8, 8)
 
 /* Used by PM_L3INIT_XHPI_WKDEP */
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				1
 #define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				BITFIELD(1, 1)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_CTRL_SHIFT					(1 << 8)
+#define OMAP4430_WUCLK_CTRL_SHIFT					8
 #define OMAP4430_WUCLK_CTRL_MASK					BITFIELD(8, 8)
 
 /* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_STATUS_SHIFT					(1 << 9)
+#define OMAP4430_WUCLK_STATUS_SHIFT					9
 #define OMAP4430_WUCLK_STATUS_MASK					BITFIELD(9, 9)
 #endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 40f0062..588873b 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -24,8 +24,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)				\
 		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
-#define OMAP44XX_CHIRONSS_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
+#define OMAP44XX_PRCM_MPU_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 
@@ -179,9 +179,11 @@
 
 /* Registers appearing on both 24xx and 34xx */
 
-#define RM_RSTCTRL					0x0050
-#define RM_RSTTIME					0x0054
-#define RM_RSTST					0x0058
+#define OMAP2_RM_RSTCTRL				0x0050
+#define OMAP2_RM_RSTTIME				0x0054
+#define OMAP2_RM_RSTST					0x0058
+#define OMAP2_PM_PWSTCTRL				0x00e0
+#define OMAP2_PM_PWSTST					0x00e4
 
 #define PM_WKEN						0x00a0
 #define PM_WKEN1					PM_WKEN
@@ -191,8 +193,6 @@
 #define PM_EVGENCTRL					0x00d4
 #define PM_EVGENONTIM					0x00d8
 #define PM_EVGENOFFTIM					0x00dc
-#define PM_PWSTCTRL					0x00e0
-#define PM_PWSTST					0x00e4
 
 /* Omap2 specific registers */
 #define OMAP24XX_PM_WKEN2				0x00a4
@@ -220,6 +220,13 @@
 #define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
 #define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
 
+/* Omap4 specific registers */
+#define OMAP4_RM_RSTCTRL				0x0000
+#define OMAP4_RM_RSTTIME				0x0004
+#define OMAP4_RM_RSTST					0x0008
+#define OMAP4_PM_PWSTCTRL				0x0000
+#define OMAP4_PM_PWSTST					0x0004
+
 
 #ifndef __ASSEMBLER__
 
@@ -277,7 +284,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
 #define OMAP_ONLOADMODE_SHIFT				1
 #define OMAP_ONLOADMODE_MASK				(0x3 << 1)
-#define OMAP_ENABLE					(1 << 0)
+#define OMAP_ENABLE_MASK				(1 << 0)
 
 /* PRM_RSTTIME */
 /* Named RM_RSTTIME_WKUP on the 24xx */
@@ -289,8 +296,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 /* PRM_RSTCTRL */
 /* Named RM_RSTCTRL_WKUP on the 24xx */
 /* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3					(1 << 2)
-#define OMAP_RST_GS					(1 << 1)
+#define OMAP_RST_DPLL3_MASK				(1 << 2)
+#define OMAP_RST_GS_MASK				(1 << 1)
 
 
 /*
@@ -309,7 +316,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
  *	 PM_PWSTST_NEON
  */
-#define OMAP_INTRANSITION				(1 << 20)
+#define OMAP_INTRANSITION_MASK				(1 << 20)
 
 
 /*
@@ -331,7 +338,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
  *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
  */
-#define OMAP_COREDOMAINWKUP_RST				(1 << 3)
+#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
 
 /*
  * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
@@ -340,7 +347,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  *
  * 3430: RM_RSTST_CORE, RM_RSTST_EMU
  */
-#define OMAP_DOMAINWKUP_RST				(1 << 2)
+#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
 
 /*
  * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
@@ -350,8 +357,8 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  *
  * 3430: RM_RSTST_CORE, RM_RSTST_EMU
  */
-#define OMAP_GLOBALWARM_RST				(1 << 1)
-#define OMAP_GLOBALCOLD_RST				(1 << 0)
+#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
+#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
 
 /*
  * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
@@ -375,7 +382,7 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
  *	 PM_PWSTCTRL_NEON
  */
-#define OMAP_LOGICRETSTATE				(1 << 2)
+#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
 
 /*
  * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index adb2558..fe8ef26 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx PRM instance offset macros
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -25,387 +25,726 @@
 
 /* PRM */
 
-
 /* PRM.OCP_SOCKET_PRM register offsets */
+#define OMAP4_REVISION_PRM_OFFSET			0x0000
 #define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET			0x0010
 #define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET		0x0014
 #define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4_PRM_IRQENABLE_MPU_OFFSET			0x0018
 #define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET		0x001c
 #define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET		0x0020
 #define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET		0x0028
 #define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET		0x0030
 #define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
 #define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_PRM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
 
 /* PRM.CKGEN_PRM register offsets */
+#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
 #define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET		0x0004
 #define OMAP4430_CM_DPLL_SYS_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
 #define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
 #define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4_CM_SYS_CLKSEL_OFFSET			0x0010
 #define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
 
 /* PRM.MPU_PRM register offsets */
+#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4_PM_MPU_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4_RM_MPU_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
 
 /* PRM.TESLA_PRM register offsets */
+#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4_PM_TESLA_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4_RM_TESLA_RSTCTRL_OFFSET			0x0010
 #define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4_RM_TESLA_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
 
 /* PRM.ABE_PRM register offsets */
+#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4_PM_ABE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET			0x0030
 #define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET			0x0034
 #define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
 #define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
 #define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET		0x0050
 #define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET		0x0058
 #define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET		0x0070
 #define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET		0x0074
 #define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET		0x0080
 #define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET			0x0088
 #define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
 
 /* PRM.ALWAYS_ON_PRM register offsets */
+#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
 
 /* PRM.CORE_PRM register offsets */
+#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4_PM_CORE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET		0x0124
 #define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET		0x012c
 #define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET		0x0134
 #define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET			0x0210
 #define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4_RM_DUCATI_RSTST_OFFSET			0x0214
 #define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET		0x0224
 #define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET		0x0324
 #define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET		0x0424
 #define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET		0x042c
 #define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET		0x0434
 #define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET		0x043c
 #define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET		0x0444
 #define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET		0x0454
 #define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET		0x045c
 #define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET		0x0464
 #define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET		0x0524
 #define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
+#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET		0x052c
 #define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET		0x0534
 #define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET		0x0624
 #define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET		0x062c
 #define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
 #define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
 #define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET		0x0724
 #define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET	0x072c
 #define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET		0x0744
 #define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
 
 /* PRM.IVAHD_PRM register offsets */
+#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4_PM_IVAHD_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET			0x0010
 #define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4_RM_IVAHD_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
 
 /* PRM.CAM_PRM register offsets */
+#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4_PM_CAM_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
 
 /* PRM.DSS_PRM register offsets */
+#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4_PM_DSS_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET			0x0020
 #define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
 
 /* PRM.GFX_PRM register offsets */
+#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4_PM_GFX_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
 
 /* PRM.L3INIT_PRM register offsets */
+#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET		0x0000
 #define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4_PM_L3INIT_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET		0x0058
 #define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET		0x0088
 #define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET		0x0094
 #define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET		0x0098
 #define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET		0x009c
 #define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET		0x00ac
 #define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET		0x00c0
 #define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET		0x00c4
 #define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET		0x00c8
 #define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET		0x00cc
 #define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET	0x00d0
 #define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET	0x00d4
 #define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET	0x00e4
 #define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
 
 /* PRM.L4PER_PRM register offsets */
+#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4_PM_L4PER_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET		0x0050
 #define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET		0x0070
 #define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET		0x0074
 #define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET		0x0080
 #define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET		0x0090
 #define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET		0x0094
 #define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET		0x0098
 #define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET		0x009c
 #define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET		0x00a0
 #define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET		0x00a4
 #define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET		0x00a8
 #define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET		0x00ac
 #define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET		0x00b0
 #define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET		0x00b4
 #define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET		0x00b8
 #define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET		0x00bc
 #define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET		0x00c0
 #define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET		0x00d0
 #define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET		0x00d4
 #define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET		0x00d8
 #define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET		0x00dc
 #define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET		0x00e0
 #define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET		0x00e4
 #define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET		0x00ec
 #define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET		0x00f0
 #define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET		0x00f4
 #define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET		0x00f8
 #define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET		0x00fc
 #define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET		0x0100
 #define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET		0x0104
 #define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET		0x0108
 #define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET		0x010c
 #define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET		0x0120
 #define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET		0x0124
 #define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET		0x0128
 #define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET		0x012c
 #define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET		0x0134
 #define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET		0x0138
 #define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET		0x013c
 #define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET		0x0140
 #define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET		0x0144
 #define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET		0x0148
 #define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET		0x014c
 #define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET		0x0150
 #define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET		0x0154
 #define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET		0x0158
 #define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET		0x015c
 #define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET		0x0160
 #define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET		0x0164
 #define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET		0x0168
 #define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET		0x016c
 #define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET		0x01a4
 #define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET		0x01ac
 #define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x01b4
 #define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET		0x01bc
 #define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET		0x01c4
 #define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET		0x01cc
 #define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET		0x01dc
 #define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
 
 /* PRM.CEFUSE_PRM register offsets */
+#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET		0x0000
 #define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
 
 /* PRM.WKUP_PRM register offsets */
+#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET			0x0030
 #define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET			0x0058
 #define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET			0x0080
 #define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
 
 /* PRM.WKUP_CM register offsets */
+#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
 
 /* PRM.EMU_PRM register offsets */
+#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4_PM_EMU_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
 
 /* PRM.EMU_CM register offsets */
+#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
 
 /* PRM.DEVICE_PRM register offsets */
+#define OMAP4_PRM_RSTCTRL_OFFSET			0x0000
 #define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4_PRM_RSTST_OFFSET				0x0004
 #define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4_PRM_RSTTIME_OFFSET			0x0008
 #define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4_PRM_CLKREQCTRL_OFFSET			0x000c
 #define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4_PRM_VOLTCTRL_OFFSET			0x0010
 #define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4_PRM_PWRREQCTRL_OFFSET			0x0014
 #define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4_PRM_PSCON_COUNT_OFFSET			0x0018
 #define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4_PRM_IO_COUNT_OFFSET			0x001c
 #define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4_PRM_IO_PMCTRL_OFFSET			0x0020
 #define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET		0x0024
 #define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET		0x0028
 #define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET		0x002c
 #define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET		0x0030
 #define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET	0x0034
 #define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET	0x0038
 #define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET	0x003c
 #define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET			0x0040
 #define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4_PRM_VP_CORE_STATUS_OFFSET			0x0044
 #define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET		0x0048
 #define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET		0x004c
 #define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET		0x0050
 #define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET		0x0054
 #define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET			0x0058
 #define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4_PRM_VP_MPU_STATUS_OFFSET			0x005c
 #define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET		0x0060
 #define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
 #define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET		0x0068
 #define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET		0x006c
 #define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET			0x0070
 #define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4_PRM_VP_IVA_STATUS_OFFSET			0x0074
 #define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET		0x0078
 #define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET			0x007c
 #define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET		0x0080
 #define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET		0x0084
 #define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4_PRM_VC_SMPS_SA_OFFSET			0x0088
 #define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET		0x008c
 #define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET		0x0090
 #define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x0098
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET		0x009c
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
 #define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET			0x00a4
 #define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
+#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET		0x00a8
 #define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET			0x00ac
 #define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4_PRM_SRAM_COUNT_OFFSET			0x00b0
 #define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET		0x00b4
 #define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET		0x00b8
 #define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET		0x00bc
 #define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET		0x00c0
 #define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET		0x00c4
 #define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET		0x00c8
 #define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET		0x00cc
 #define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET		0x00d0
 #define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET		0x00d4
 #define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET		0x00d8
 #define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
 #define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET		0x00e0
 #define OMAP4430_PRM_LDO_BANDGAP_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
 #define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
 #define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4_PRM_PHASE2A_CNDP_OFFSET			0x00ec
 #define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4_PRM_PHASE2B_CNDP_OFFSET			0x00f0
 #define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
+#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
 #define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
 
-/* CHIRON_PRCM */
-
+/*
+ * PRCM_MPU
+ *
+ * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
+ * point of view the PRCM_MPU is a single entity. It shares the same
+ * programming model as the global PRCM and thus can be assimilate as two new
+ * MOD inside the PRCM
+ */
 
-/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM				OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
+#define OMAP4_REVISION_PRCM_OFFSET			0x0000
+#define OMAP4430_REVISION_PRCM				OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD, 0x0000)
 
-/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+/* PRCM_MPU.DEVICE_PRM register offsets */
+#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET			0x0000
+#define OMAP4430_PRCM_MPU_PRM_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000)
 
-/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+/* PRCM_MPU.CPU0 register offsets */
+#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU0_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0000)
+#define OMAP4_PM_CPU0_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU0_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0004)
+#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU0_CPU0_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0008)
+#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU0_CPU0_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x000c)
+#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU0_CPU0_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0010)
+#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU0_CPU0_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0014)
+#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU0_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0018)
 
-/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+/* PRCM_MPU.CPU1 register offsets */
+#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU1_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0000)
+#define OMAP4_PM_CPU1_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU1_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0004)
+#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU1_CPU1_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0008)
+#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU1_CPU1_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x000c)
+#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU1_CPU1_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0010)
+#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU1_CPU1_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0014)
+#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU1_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0018)
 #endif
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
new file mode 100644
index 0000000..cd43529
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Numonyx M65KXXXXAM
+ *
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+
+#include <plat/sdrc.h>
+
+/* Numonyx  M65KXXXXAM */
+static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
+	[0] = {
+		.rate		= 200000000,
+		.actim_ctrla	= 0xe321d4c6,
+		.actim_ctrlb	= 0x00022328,
+		.rfr_ctrl	= 0x0005e601,
+		.mr		= 0x00000032,
+	},
+	[1] = {
+		.rate		= 166000000,
+		.actim_ctrla	= 0xba9dc485,
+		.actim_ctrlb	= 0x00022321,
+		.rfr_ctrl	= 0x0004dc01,
+		.mr		= 0x00000032,
+	},
+	[2] = {
+		.rate		= 133000000,
+		.actim_ctrla	= 0x9a19b485,
+		.actim_ctrlb	= 0x0002231b,
+		.rfr_ctrl	= 0x0003de01,
+		.mr		= 0x00000032,
+	},
+	[3] = {
+		.rate		= 83000000,
+		.actim_ctrla	= 0x594ca242,
+		.actim_ctrlb	= 0x00022310,
+		.rfr_ctrl	= 0x00025501,
+		.mr		= 0x00000032,
+	},
+	[4] = {
+		.rate			= 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index cbfbd14..4c65f56 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -119,8 +119,15 @@ int omap2_sdrc_get_params(unsigned long r,
 
 void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 {
-	omap2_sdrc_base = omap2_globals->sdrc;
-	omap2_sms_base = omap2_globals->sms;
+	/* Static mapping, never released */
+	if (omap2_globals->sdrc) {
+		omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
+		WARN_ON(!omap2_sdrc_base);
+	}
+	if (omap2_globals->sms) {
+		omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
+		WARN_ON(!omap2_sms_base);
+	}
 }
 
 /**
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964be..3771254 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -23,6 +23,7 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <plat/common.h>
 #include <plat/board.h>
@@ -36,7 +37,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -74,7 +81,6 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -87,7 +93,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -100,7 +105,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -111,10 +115,8 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 	}
 };
 
-#ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -124,7 +126,15 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 		.flags		= 0
 	}
 };
-#endif
+
+void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
+{
+	serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
+	serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
+	serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
+	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
+}
+
 static inline unsigned int __serial_read_reg(struct uart_port *up,
 					   int offset)
 {
@@ -139,6 +149,13 @@ static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 	return (unsigned int)__raw_readb(up->membase + offset);
 }
 
+static inline void __serial_write_reg(struct uart_port *up, int offset,
+		int value)
+{
+	offset <<= up->regshift;
+	__raw_writeb(value, up->membase + offset);
+}
+
 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
 {
@@ -422,7 +439,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
@@ -520,7 +538,7 @@ static ssize_t sleep_timeout_store(struct device *dev,
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
-		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		dev_err(dev, "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -567,7 +585,7 @@ static struct omap_uart_state omap_uart[] = {
 			},
 		},
 	},
-#ifdef CONFIG_ARCH_OMAP4
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	{
 		.pdev = {
 			.name			= "serial8250",
@@ -598,44 +616,69 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
 	return __serial_read_reg(up, offset);
 }
 
+static void serial_out_override(struct uart_port *up, int offset, int value)
+{
+	unsigned int status, tmout = 10000;
+
+	status = __serial_read_reg(up, UART_LSR);
+	while (!(status & UART_LSR_THRE)) {
+		/* Wait up to 10ms for the character(s) to be sent. */
+		if (--tmout == 0)
+			break;
+		udelay(1);
+		status = __serial_read_reg(up, UART_LSR);
+	}
+	__serial_write_reg(up, offset, value);
+}
 void __init omap_serial_early_init(void)
 {
-	int i;
+	int i, nr_ports;
 	char name[16];
 
+	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+		nr_ports = 3;
+	else
+		nr_ports = ARRAY_SIZE(omap_uart);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
 
-	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
+	for (i = 0; i < nr_ports; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
+		/* Don't map zero-based physical address */
+		if (p->mapbase == 0) {
+			dev_warn(dev, "no physical address for uart#%d,"
+				 " so skipping early_init...\n", i);
+			continue;
+		}
 		/*
 		 * Module 4KB + L4 interconnect 4KB
 		 * Static mapping, never released
 		 */
 		p->membase = ioremap(p->mapbase, SZ_8K);
 		if (!p->membase) {
-			printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+			dev_err(dev, "ioremap failed for uart%i\n", i + 1);
 			continue;
 		}
 
-		sprintf(name, "uart%d_ick", i+1);
+		sprintf(name, "uart%d_ick", i + 1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
-			printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+			dev_err(dev, "Could not get uart%d_ick\n", i + 1);
 			uart->ick = NULL;
 		}
 
 		sprintf(name, "uart%d_fck", i+1);
 		uart->fck = clk_get(NULL, name);
 		if (IS_ERR(uart->fck)) {
-			printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+			dev_err(dev, "Could not get uart%d_fck\n", i + 1);
 			uart->fck = NULL;
 		}
 
@@ -678,6 +721,13 @@ void __init omap_serial_init_port(int port)
 	pdev = &uart->pdev;
 	dev = &pdev->dev;
 
+	/* Don't proceed if there's no clocks available */
+	if (unlikely(!uart->ick || !uart->fck)) {
+		WARN(1, "%s: can't init uart%d, no clocks available\n",
+		     kobject_name(&dev->kobj), port);
+		return;
+	}
+
 	omap_uart_enable_clocks(uart);
 
 	omap_uart_reset(uart);
@@ -694,15 +744,19 @@ void __init omap_serial_init_port(int port)
 		DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
 	}
 
-		/* omap44xx: Never read empty UART fifo
-		 * omap3xxx: Never read empty UART fifo on UARTs
-		 * with IP rev >=0x52
-		 */
-		if (cpu_is_omap44xx())
-			uart->p->serial_in = serial_in_override;
-		else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
-				>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
-			uart->p->serial_in = serial_in_override;
+	/*
+	 * omap44xx: Never read empty UART fifo
+	 * omap3xxx: Never read empty UART fifo on UARTs
+	 * with IP rev >=0x52
+	 */
+	if (cpu_is_omap44xx()) {
+		uart->p->serial_in = serial_in_override;
+		uart->p->serial_out = serial_out_override;
+	} else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
+		uart->p->serial_in = serial_in_override;
+		uart->p->serial_out = serial_out_override;
+	}
 }
 
 /**
@@ -714,8 +768,13 @@ void __init omap_serial_init_port(int port)
  */
 void __init omap_serial_init(void)
 {
-	int i;
+	int i, nr_ports;
+
+	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
+		nr_ports = 3;
+	else
+		nr_ports = ARRAY_SIZE(omap_uart);
 
-	for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
+	for (i = 0; i < nr_ports; i++)
 		omap_serial_init_port(i);
 }
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index c3626ea..d522cd7 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -33,12 +33,14 @@
 #include "prm.h"
 #include "sdrc.h"
 
+#define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
+
 #define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
 				OMAP3430_PM_PREPWSTST)
 #define PM_PREPWSTST_CORE_P	0x48306AE8
 #define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
 				OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
 #define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
 #define SRAM_BASE_P		0x40200000
 #define CONTROL_STAT		0x480022F0
@@ -57,6 +59,37 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
+        .text
+/* Function to aquire the semaphore in scratchpad */
+ENTRY(lock_scratchpad_sem)
+	stmfd	sp!, {lr}	@ save registers on stack
+wait_sem:
+	mov	r0,#1
+	ldr	r1, sdrc_scratchpad_sem
+wait_loop:
+	ldr	r2, [r1]	@ load the lock value
+	cmp	r2, r0		@ is the lock free ?
+	beq	wait_loop	@ not free...
+	swp	r2, r0, [r1]	@ semaphore free so lock it and proceed
+	cmp	r2, r0		@ did we succeed ?
+	beq	wait_sem	@ no - try again
+	ldmfd	sp!, {pc}	@ restore regs and return
+sdrc_scratchpad_sem:
+        .word SDRC_SCRATCHPAD_SEM_V
+ENTRY(lock_scratchpad_sem_sz)
+        .word   . - lock_scratchpad_sem
+
+        .text
+/* Function to release the scratchpad semaphore */
+ENTRY(unlock_scratchpad_sem)
+	stmfd	sp!, {lr}	@ save registers on stack
+	ldr	r3, sdrc_scratchpad_sem
+	mov	r2,#0
+	str	r2,[r3]
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(unlock_scratchpad_sem_sz)
+        .word   . - unlock_scratchpad_sem
+
 	.text
 /* Function call to get the restore pointer for resume from OFF */
 ENTRY(get_restore_pointer)
@@ -251,6 +284,21 @@ restore:
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 
+#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	/* Restore L2 aux control register */
+	@ set service ID for PPA
+	mov	r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+	mov	r12, r0		@ copy service ID in r12
+	mov	r1, #0		@ set task ID for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4, #0xBC]
+	adds	r3, r3, #8	@ r3 points to parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+#endif
 	b	logic_l1_restore
 l2_inv_api_params:
 	.word   0x1, 0x00
@@ -264,6 +312,11 @@ smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
 	ldr	r0, [r3,#4]
 	mov	r12, #0x3
 	.word 0xE1600070	@ Call SMI monitor (smieq)
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldr	r0, [r3,#12]
+	mov	r12, #0x2
+	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
 	mov	r1, #0
 	/* Invalidate all instruction caches to PoU
@@ -272,7 +325,7 @@ logic_l1_restore:
 
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
-	adds	r3, r3, #8
+	adds	r3, r3, #16
 	ldmia	r3!, {r4-r6}
 	mov	sp, r4
 	msr	spsr_cxsf, r5
@@ -391,7 +444,9 @@ save_context_wfi:
 	mov	r8, r0 /* Store SDRAM address in r8 */
 	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
 	mov	r4, #0x1		@ Number of parameters for restore call
-	stmia	r8!, {r4-r5}
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
+	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index cd04dea..74fbed8 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -85,8 +85,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 		period -= 1;
-		if (cpu_is_omap44xx())
-			period = 0xff;	/* FIXME: */
 		omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -150,9 +148,6 @@ static void __init omap2_gp_clockevent_init(void)
 		     "timer-gp: omap_dm_timer_set_source() failed\n");
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
-	if (cpu_is_omap44xx())
-		/* Assuming 32kHz clk is driving GPT1 */
-		tick_rate = 32768;	/* FIXME: */
 
 	pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
 		gptimer_id, tick_rate);
diff --git a/arch/arm/mach-omap2/timer-mpu.c b/arch/arm/mach-omap2/timer-mpu.c
index c1a650a..954682e 100644
--- a/arch/arm/mach-omap2/timer-mpu.c
+++ b/arch/arm/mach-omap2/timer-mpu.c
@@ -28,7 +28,7 @@
  */
 void __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
-	evt->irq = INT_44XX_LOCALTIMER_IRQ;
+	evt->irq = OMAP44XX_IRQ_LOCALTIMER;
 	twd_timer_setup(evt);
 }
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index f1df873..d72d1ac 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 
@@ -70,7 +72,7 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case EHCI_HCD_OMAP_MODE_PHY:
@@ -213,7 +215,7 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -229,10 +231,165 @@ void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 {
 }
 
 #endif /* CONFIG_USB_EHCI_HCD */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP34XX_OHCI_BASE,
+		.end	= OMAP34XX_OHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* general IRQ */
+		.start	= INT_34XX_OHCI_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ohci_device = {
+	.name		= "ohci-omap3",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource	= ohci_resources,
+};
+
+static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm1_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm1_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm1_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[1]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm2_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm2_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm2_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[2]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm3_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm3_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm3_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+}
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for OHCI */
+	if (cpu_is_omap34xx())
+		setup_ohci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ohci_device) < 0) {
+		pr_err("Unable to register FS-USB (OHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+}
+
+#endif /* CONFIG_USB_OHCI_HCD */
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a80441d..96f6787 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -47,70 +47,11 @@ static struct resource musb_resources[] = {
 	},
 };
 
-static int clk_on;
-
-static int musb_set_clock(struct clk *clk, int state)
-{
-	if (state) {
-		if (clk_on > 0)
-			return -ENODEV;
-
-		clk_enable(clk);
-		clk_on = 1;
-	} else {
-		if (clk_on == 0)
-			return -ENODEV;
-
-		clk_disable(clk);
-		clk_on = 0;
-	}
-
-	return 0;
-}
-
-static struct musb_hdrc_eps_bits musb_eps[] = {
-	{	"ep1_tx", 10,	},
-	{	"ep1_rx", 10,	},
-	{	"ep2_tx", 9,	},
-	{	"ep2_rx", 9,	},
-	{	"ep3_tx", 3,	},
-	{	"ep3_rx", 3,	},
-	{	"ep4_tx", 3,	},
-	{	"ep4_rx", 3,	},
-	{	"ep5_tx", 3,	},
-	{	"ep5_rx", 3,	},
-	{	"ep6_tx", 3,	},
-	{	"ep6_rx", 3,	},
-	{	"ep7_tx", 3,	},
-	{	"ep7_rx", 3,	},
-	{	"ep8_tx", 2,	},
-	{	"ep8_rx", 2,	},
-	{	"ep9_tx", 2,	},
-	{	"ep9_rx", 2,	},
-	{	"ep10_tx", 2,	},
-	{	"ep10_rx", 2,	},
-	{	"ep11_tx", 2,	},
-	{	"ep11_rx", 2,	},
-	{	"ep12_tx", 2,	},
-	{	"ep12_rx", 2,	},
-	{	"ep13_tx", 2,	},
-	{	"ep13_rx", 2,	},
-	{	"ep14_tx", 2,	},
-	{	"ep14_rx", 2,	},
-	{	"ep15_tx", 2,	},
-	{	"ep15_rx", 2,	},
-};
-
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,
 	.dyn_fifo	= 1,
-	.soft_con	= 1,
-	.dma		= 1,
 	.num_eps	= 16,
-	.dma_channels	= 7,
-	.dma_req_chan	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 	.ram_bits	= 12,
-	.eps_bits	= musb_eps,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -122,7 +63,6 @@ static struct musb_hdrc_platform_data musb_plat = {
 	.mode		= MUSB_PERIPHERAL,
 #endif
 	/* .clock is set dynamically */
-	.set_clock	= musb_set_clock,
 	.config		= &musb_config,
 
 	/* REVISIT charge pump on TWL4030 can supply up to
@@ -146,28 +86,35 @@ static struct platform_device musb_device = {
 	.resource	= musb_resources,
 };
 
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
-	if (cpu_is_omap243x())
+	if (cpu_is_omap243x()) {
 		musb_resources[0].start = OMAP243X_HS_BASE;
-	else
+	} else if (cpu_is_omap34xx()) {
 		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
-	musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+	} else if (cpu_is_omap44xx()) {
+		musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
+		musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
+		musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
+	}
+	musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
 
 	/*
 	 * REVISIT: This line can be removed once all the platforms using
 	 * musb_core.c have been converted to use use clkdev.
 	 */
 	musb_plat.clock = "ick";
+	musb_plat.board_data = board_data;
+	musb_plat.power = board_data->power >> 1;
+	musb_plat.mode = board_data->mode;
+	musb_plat.extvbus = board_data->extvbus;
 
-	if (platform_device_register(&musb_device) < 0) {
+	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
-		return;
-	}
 }
 
 #else
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
 }
 #endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513c..905719a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini platform.
 
+config MACH_LINKSTATION_LS_HGL
+	bool "Buffalo Linkstation LS-HGL"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation LS-HGL platform.
+
 config MACH_TS409
 	bool "QNAP TS-409"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fc..eb6eabc 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index f87fa12..8dc2c76 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -488,7 +488,7 @@ static struct platform_device orion5x_xor0_channel = {
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor0_data,
+		.platform_data		= &orion5x_xor0_data,
 	},
 };
 
@@ -514,7 +514,7 @@ static struct platform_device orion5x_xor1_channel = {
 	.dev		= {
 		.dma_mask		= &orion5x_xor_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= (void *)&orion5x_xor1_data,
+		.platform_data		= &orion5x_xor1_data,
 	},
 };
 
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 9d4bf76..7130904 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -149,10 +149,7 @@ static void __init d2net_sata_power_init(void)
 
 /*
  * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity. This feature is disabled to make this LED compatible with
- * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
- * GPIO's and have to stay in an active state. This is needed to set the blue
- * LED in a "fix on" state regardless of the SATA activity.
+ * SATA activity.
  *
  * The following array detail the different LED registers and the combination
  * of their possible values:
@@ -171,12 +168,11 @@ static void __init d2net_sata_power_init(void)
 #define D2NET_GPIO_RED_LED		6
 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
 #define D2NET_GPIO_BLUE_LED_OFF		23
-#define D2NET_GPIO_SATA0_ACT		14
-#define D2NET_GPIO_SATA1_ACT		15
 
 static struct gpio_led d2net_leds[] = {
 	{
-		.name = "d2net:blue:power",
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
 		.gpio = D2NET_GPIO_BLUE_LED_OFF,
 		.active_low = 1,
 	},
@@ -201,25 +197,22 @@ static struct platform_device d2net_gpio_leds = {
 
 static void __init d2net_gpio_leds_init(void)
 {
+	int err;
+
 	/* Configure GPIO over MPP max number. */
 	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
 
-	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
-		return;
-	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
-		goto err_free_1;
-	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
-		goto err_free_1;
-	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
-		goto err_free_2;
-	platform_device_register(&d2net_gpio_leds);
-	return;
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
-err_free_2:
-	gpio_free(D2NET_GPIO_SATA1_ACT);
-err_free_1:
-	gpio_free(D2NET_GPIO_SATA0_ACT);
-	return;
+	platform_device_register(&d2net_gpio_leds);
 }
 
 /****************************************************************************
@@ -289,8 +282,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
 	{ 11, MPP_UNUSED },
 	{ 12, MPP_GPIO },	/* SATA 1 power */
 	{ 13, MPP_UNUSED },
-	{ 14, MPP_GPIO },	/* SATA 0 active */
-	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 14, MPP_SATA_LED },	/* SATA 0 active */
+	{ 15, MPP_SATA_LED },	/* SATA 1 active */
 	{ 16, MPP_GPIO },	/* Blue front LED blink control */
 	{ 17, MPP_UNUSED },
 	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
@@ -301,6 +294,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
 	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
 };
 
+#define D2NET_GPIO_INHIBIT_POWER_OFF    24
+
 static void __init d2net_init(void)
 {
 	/*
@@ -333,6 +328,8 @@ static void __init d2net_init(void)
 
 	i2c_register_board_info(0, d2net_i2c_devices,
 				ARRAY_SIZE(d2net_i2c_devices));
+
+	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
 }
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 8f159db..fe0de16 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -34,7 +34,8 @@
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
-#define DNS323_GPIO_LED_POWER		5
+#define DNS323_GPIO_LED_POWER1		4
+#define DNS323_GPIO_LED_POWER2		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
 #define DNS323_GPIO_POWER_OFF		8
@@ -237,11 +238,33 @@ error_fail:
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio, int state,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
+		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+	switch(state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		orion_gpio_set_blink(gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		orion_gpio_set_blink(gpio, 1);
+	}
+	return 0;
+}
+
 static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
+		.gpio = DNS323_GPIO_LED_POWER2,
+		.default_trigger = "timer",
+		.active_low = 1,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -256,6 +279,7 @@ static struct gpio_led dns323_leds[] = {
 static struct gpio_led_platform_data dns323_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323_leds),
 	.leds		= dns323_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
@@ -412,6 +436,15 @@ static void __init dns323_init(void)
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
+	/* The 5181 power LED is active low and requires
+	 * DNS323_GPIO_LED_POWER1 to also be low.
+	 */
+	if (dns323_dev_id() == MV88F5181_DEV_ID) {
+		dns323_leds[0].active_low = 1;
+		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	}
+
 	platform_device_register(&dns323_gpio_leds);
 
 	platform_device_register(&dns323_button_device);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index c7f808bf..91e0e39 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart,rx
+	.macro  addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
index 7147a29..06b50ae 100644
--- a/arch/arm/mach-orion5x/include/mach/vmalloc.h
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -2,4 +2,4 @@
  * arch/arm/mach-orion5x/include/mach/vmalloc.h
  */
 
-#define VMALLOC_END       0xfd800000
+#define VMALLOC_END       0xfd800000UL
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 0000000..8e569be
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE	0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LS_HGL_NOR_BOOT_BASE,
+	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &ls_hgl_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+	{
+		.name	   = "alarm:red",
+		.gpio	   = LS_HGL_GPIO_LED_ALARM,
+		.active_low     = 1,
+	}, {
+		.name	   = "info:amber",
+		.gpio	   = LS_HGL_GPIO_LED_INFO,
+		.active_low     = 1,
+	}, {
+		.name	   = "func:blue:top",
+		.gpio	   = LS_HGL_GPIO_LED_FUNC,
+		.active_low     = 1,
+	}, {
+		.name	   = "power:blue:bottom",
+		.gpio	   = LS_HGL_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+	.leds	   = ls_hgl_led_pins,
+	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &ls_hgl_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
+		.desc	   = "Function Button",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_POWER,
+		.gpio	   = LS_HGL_GPIO_KEY_POWER,
+		.desc	   = "Power-on Switch",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_AUTOPOWER,
+		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+	.buttons	= ls_hgl_buttons,
+	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &ls_hgl_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+	.n_ports	= 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+	arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER	9
+#define LS_HGL_GPIO_AUTO_POWER	10
+#define LS_HGL_GPIO_POWER	    8
+
+#define LS_HGL_GPIO_HDD_POWER	1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO }, /* LED_PWR */
+	{  1, MPP_GPIO }, /* HDD_PWR */
+	{  2, MPP_GPIO }, /* LED_ALARM */
+	{  3, MPP_GPIO }, /* LED_INFO */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_GPIO }, /* FAN_LCK */
+	{  7, MPP_GPIO }, /* INIT */
+	{  8, MPP_GPIO }, /* POWER */
+	{  9, MPP_GPIO }, /* USB_PWR */
+	{ 10, MPP_GPIO }, /* AUTO_POWER */
+	{ 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_UNUSED },
+	{ 15, MPP_GPIO }, /* FUNC */
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO }, /* LED_FUNC */
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ls_hgl_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&ls_hgl_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+				   LS_HGL_NOR_BOOT_SIZE);
+	platform_device_register(&ls_hgl_nor_flash);
+
+	platform_device_register(&ls_hgl_button_device);
+
+	platform_device_register(&ls_hgl_leds);
+
+	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+	/* enable USB power */
+	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = ls_hgl_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= ls_hgl_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c9bf6b8..c704f05 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
@@ -19,12 +18,13 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
-#include <asm/mach-types.h>
 #include <linux/gpio.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
-#include "include/mach/system.h"
 
 /*****************************************************************************
  * Linkstation Mini Info
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-	arch_reset(0, NULL);
+	arm_machine_restart('h', NULL);
 }
 
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index bdf96eb..e8706f1 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mbus.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cb0feca..f9f222e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -77,7 +77,7 @@ static struct gpio_keys_button wrt350n_v2_buttons[] = {
 		.desc		= "Reset Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_WLAN,
+		.code		= KEY_WPS_BUTTON,
 		.gpio		= 2,
 		.desc		= "WPS Button",
 		.active_low	= 1,
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 898c0e8..9d1975f 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -22,8 +22,9 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include <asm/clkdev.h>
 
+#include <mach/hardware.h>
 #include <mach/clock.h>
 #include "clock.h"
 
@@ -56,18 +57,19 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-static inline void clk_reg_disable(struct clk *clk)
+static void clk_reg_disable(struct clk *clk)
 {
 	if (clk->enable_reg)
 		__raw_writel(__raw_readl(clk->enable_reg) &
 			     ~(1 << clk->enable_shift), clk->enable_reg);
 }
 
-static inline void clk_reg_enable(struct clk *clk)
+static int clk_reg_enable(struct clk *clk)
 {
 	if (clk->enable_reg)
 		__raw_writel(__raw_readl(clk->enable_reg) |
 			     (1 << clk->enable_shift), clk->enable_reg);
+	return 0;
 }
 
 static inline void clk_reg_disable1(struct clk *clk)
@@ -636,31 +638,34 @@ static struct clk flash_ck = {
 static struct clk i2c0_ck = {
 	.name = "i2c0_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 0,
 	.enable_reg = I2CCLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk i2c1_ck = {
 	.name = "i2c1_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 1,
 	.enable_reg = I2CCLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk i2c2_ck = {
 	.name = "i2c2_ck",
 	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
+	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
 	.enable_shift = 2,
 	.enable_reg = USB_OTG_CLKCTRL_REG,
+	.rate = 13000000,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 static struct clk spi0_ck = {
@@ -738,16 +743,16 @@ static struct clk wdt_ck = {
 	.name = "wdt_ck",
 	.parent = &per_ck,
 	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
 	.enable_shift = 0,
 	.enable_reg = TIMCLKCTRL_REG,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 /* These clocks are visible outside this module
  * and can be initialized
  */
-static struct clk *onchip_clks[] = {
+static struct clk *onchip_clks[] __initdata = {
 	&ck_13MHz,
 	&ck_pll1,
 	&ck_pll4,
@@ -777,49 +782,74 @@ static struct clk *onchip_clks[] = {
 	&wdt_ck,
 };
 
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-	    && clk->user_rate)
-		ret = clk->set_rate(clk, clk->user_rate);
-	return ret;
-}
+static struct clk_lookup onchip_clkreg[] = {
+	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
+	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
+	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
+	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
+	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
+	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
+	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
+	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
+	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
+	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
+	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
+	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
+	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
+	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
+	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
+	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
+	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
+	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
+	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
+	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
+	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
+	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
+	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
+	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
+	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
+	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
+	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
+};
 
 static void local_clk_disable(struct clk *clk)
 {
-	if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-		clk->set_rate(clk, 0);
-}
+	if (WARN_ON(clk->usecount == 0))
+		return;
 
-static void local_clk_unuse(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		local_clk_disable(clk);
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+			clk->set_rate(clk, 0);
 		if (clk->parent)
-			local_clk_unuse(clk->parent);
+			local_clk_disable(clk->parent);
 	}
 }
 
-static int local_clk_use(struct clk *clk)
+static int local_clk_enable(struct clk *clk)
 {
 	int ret = 0;
-	if (clk->usecount++ == 0) {
-		if (clk->parent)
-			ret = local_clk_use(clk->parent);
 
-		if (ret != 0) {
-			clk->usecount--;
-			goto out;
+	if (clk->usecount == 0) {
+		if (clk->parent) {
+			ret = local_clk_enable(clk->parent);
+			if (ret != 0)
+				goto out;
 		}
 
-		ret = local_clk_enable(clk);
+		if (clk->enable)
+			ret = clk->enable(clk);
+		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+			    && clk->user_rate)
+			ret = clk->set_rate(clk, clk->user_rate);
 
 		if (ret != 0 && clk->parent) {
-			local_clk_unuse(clk->parent);
-			clk->usecount--;
+			local_clk_disable(clk->parent);
+			goto out;
 		}
+
+		clk->usecount++;
 	}
 out:
 	return ret;
@@ -866,35 +896,6 @@ out:
 
 EXPORT_SYMBOL(clk_set_rate);
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *clk = ERR_PTR(-ENOENT);
-	struct clk **clkp;
-
-	clock_lock();
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		if (strcmp(id, (*clkp)->name) == 0
-		    && try_module_get((*clkp)->owner)) {
-			clk = (*clkp);
-			break;
-		}
-	}
-	clock_unlock();
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	clock_lock();
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-	clock_unlock();
-}
-EXPORT_SYMBOL(clk_put);
-
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long ret;
@@ -907,10 +908,10 @@ EXPORT_SYMBOL(clk_get_rate);
 
 int clk_enable(struct clk *clk)
 {
-	int ret = 0;
+	int ret;
 
 	clock_lock();
-	ret = local_clk_use(clk);
+	ret = local_clk_enable(clk);
 	clock_unlock();
 	return ret;
 }
@@ -920,7 +921,7 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	clock_lock();
-	local_clk_unuse(clk);
+	local_clk_disable(clk);
 	clock_unlock();
 }
 
@@ -967,18 +968,24 @@ static int __init clk_init(void)
 
 	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
 	     clkp++) {
-		if (((*clkp)->flags & NEEDS_INITIALIZATION)
-		    && ((*clkp)->set_rate)) {
-			(*clkp)->user_rate = (*clkp)->rate;
-			local_set_rate((*clkp), (*clkp)->user_rate);
-			if ((*clkp)->set_parent)
-				(*clkp)->set_parent((*clkp), (*clkp)->parent);
+		struct clk *clk = *clkp;
+		if (clk->flags & NEEDS_INITIALIZATION) {
+			if (clk->set_rate) {
+				clk->user_rate = clk->rate;
+				local_set_rate(clk, clk->user_rate);
+				if (clk->set_parent)
+					clk->set_parent(clk, clk->parent);
+			}
+			if (clk->enable && clk->usecount)
+				clk->enable(clk);
+			if (clk->disable && !clk->usecount)
+				clk->disable(clk);
 		}
 		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, (*clkp)->name, (*clkp)->rate);
+			__func__, clk->name, clk->rate);
 	}
 
-	local_clk_use(&ck_pll4);
+	local_clk_enable(&ck_pll4);
 
 	/* if ck_13MHz is not used, disable it. */
 	if (ck_13MHz.usecount == 0)
@@ -987,6 +994,8 @@ static int __init clk_init(void)
 	/* Disable autoclocking */
 	__raw_writeb(0xff, AUTOCLK_CTRL);
 
+	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
index cd58f37..39720d6 100644
--- a/arch/arm/mach-pnx4008/clock.h
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -14,8 +14,6 @@
 #define __ARCH_ARM_PNX4008_CLOCK_H__
 
 struct clk {
-	struct list_head node;
-	struct module *owner;
 	const char *name;
 	struct clk *parent;
 	struct clk *propagate_next;
@@ -29,9 +27,11 @@ struct clk {
 	u8 enable_shift1;
 	u32 enable_reg1;
 	u32 parent_switch_reg;
-	 u32(*round_rate) (struct clk *, u32);
+	u32(*round_rate) (struct clk *, u32);
 	int (*set_rate) (struct clk *, u32);
 	int (*set_parent) (struct clk * clk, struct clk * parent);
+	int (*enable)(struct clk *);
+	void (*disable)(struct clk *);
 };
 
 /* Flags */
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index 425f718..7fa4bf2 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -22,6 +22,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index f3fea29..8103f96 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -18,120 +18,24 @@
 #include <mach/irqs.h>
 #include <mach/i2c.h>
 
-static int set_clock_run(struct platform_device *pdev)
-{
-	struct clk *clk;
-	char name[10];
-	int retval = 0;
-
-	snprintf(name, 10, "i2c%d_ck", pdev->id);
-	clk = clk_get(&pdev->dev, name);
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 1);
-		clk_put(clk);
-	} else
-		retval = -ENOENT;
-
-	return retval;
-}
-
-static int set_clock_stop(struct platform_device *pdev)
-{
-	struct clk *clk;
-	char name[10];
-	int retval = 0;
-
-	snprintf(name, 10, "i2c%d_ck", pdev->id);
-	clk = clk_get(&pdev->dev, name);
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, 0);
-		clk_put(clk);
-	} else
-		retval = -ENOENT;
-
-	return retval;
-}
-
-static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int retval = 0;
-#ifdef CONFIG_PM
-	retval = set_clock_run(pdev);
-#endif
-	return retval;
-}
-
-static int i2c_pnx_resume(struct platform_device *pdev)
-{
-	int retval = 0;
-#ifdef CONFIG_PM
-	retval = set_clock_run(pdev);
-#endif
-	return retval;
-}
-
-static u32 calculate_input_freq(struct platform_device *pdev)
-{
-	return HCLK_MHZ;
-}
-
-
-static struct i2c_pnx_algo_data pnx_algo_data0 = {
+static struct i2c_pnx_data i2c0_data = {
+	.name = I2C_CHIP_NAME "0",
 	.base = PNX4008_I2C1_BASE,
 	.irq = I2C_1_INT,
 };
 
-static struct i2c_pnx_algo_data pnx_algo_data1 = {
+static struct i2c_pnx_data i2c1_data = {
+	.name = I2C_CHIP_NAME "1",
 	.base = PNX4008_I2C2_BASE,
 	.irq = I2C_2_INT,
 };
 
-static struct i2c_pnx_algo_data pnx_algo_data2 = {
+static struct i2c_pnx_data i2c2_data = {
+	.name = "USB-I2C",
 	.base = (PNX4008_USB_CONFIG_BASE + 0x300),
 	.irq = USB_I2C_INT,
 };
 
-static struct i2c_adapter pnx_adapter0 = {
-	.name = I2C_CHIP_NAME "0",
-	.algo_data = &pnx_algo_data0,
-};
-static struct i2c_adapter pnx_adapter1 = {
-	.name = I2C_CHIP_NAME "1",
-	.algo_data = &pnx_algo_data1,
-};
-
-static struct i2c_adapter pnx_adapter2 = {
-	.name = "USB-I2C",
-	.algo_data = &pnx_algo_data2,
-};
-
-static struct i2c_pnx_data i2c0_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter0,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter1,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.suspend = i2c_pnx_suspend,
-	.resume = i2c_pnx_resume,
-	.calculate_input_freq = calculate_input_freq,
-	.set_clock_run = set_clock_run,
-	.set_clock_stop = set_clock_stop,
-	.adapter = &pnx_adapter2,
-};
-
 static struct platform_device i2c0_device = {
 	.name = "pnx-i2c",
 	.id = 0,
diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f..6ca8bd3 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		mov	\rx, #0x00090000
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
index 5ff0196..b383c7d 100644
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -14,60 +14,6 @@
 #ifndef __PNX4008_TIMEX_H
 #define __PNX4008_TIMEX_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-
 #define CLOCK_TICK_RATE		1000000
 
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
 #endif
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index b3d8d53..ee3c29c 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -19,8 +19,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
 #include <mach/pm.h>
 #include <mach/clock.h>
 
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index fc0ba18..0c8aad4 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -30,6 +30,8 @@
 #include <asm/mach/time.h>
 #include <asm/errno.h>
 
+#include "time.h"
+
 /*! Note: all timers are UPCOUNTING */
 
 /*!
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
new file mode 100644
index 0000000..75e88c5
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef PNX_TIME_H
+#define PNX_TIME_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee9218..3b51741 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -19,7 +19,6 @@ config MACH_MAINSTONE
 config MACH_ZYLONITE
 	bool
 	select PXA3xx
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -39,7 +38,6 @@ config MACH_LITTLETON
 	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
-	select PXA_SSP
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
@@ -98,7 +96,6 @@ config MACH_ARMCORE
 	select PXA27x
 	select IWMMXT
 	select PXA25x
-	select PXA_SSP
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -115,6 +112,11 @@ config MACH_CM_X300
 	select CPU_PXA310
 	select HAVE_PWM
 
+config MACH_CAPC7117
+	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
 	select PXA25x
@@ -156,7 +158,6 @@ config MACH_XCEP
 	select MTD_CFI
 	select MTD_CHAR
 	select SMC91X
-	select PXA_SSP
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 	  Tuned for usage in Libera instruments for particle accelerators.
@@ -175,7 +176,6 @@ config MACH_TRIZEPS4WL
 	depends on TRIZEPS_PXA
 	select TRIZEPS_PCMCIA
 	select PXA27x
-	select PXA_SSP
 
 choice
 	prompt "Select base board for Trizeps module"
@@ -212,7 +212,6 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
@@ -250,13 +249,19 @@ config MACH_COLIBRI320
 	select PXA3xx
 	select CPU_PXA320
 
+config MACH_VPAC270
+	bool "Voipac PXA270"
+	select PXA27x
+	select HAVE_PATA_PLATFORM
+	help
+	  PXA270 based Single Board Computer.
+
 comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -267,13 +272,11 @@ config MACH_H5000
 config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
 	select CPU_PXA26x
-	select FB_W100
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -417,6 +420,22 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
+config MACH_RAUMFELD_RC
+	bool "Raumfeld Controller"
+	select PXA3xx
+	select CPU_PXA300
+	select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+	bool "Raumfeld Connector"
+	select PXA3xx
+	select CPU_PXA300
+
+config MACH_RAUMFELD_SPEAKER
+	bool "Raumfeld Speaker"
+	select PXA3xx
+	select CPU_PXA300
+
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_SCOOP
@@ -431,21 +450,20 @@ config PXA_SHARPSL
 config SHARPSL_PM
 	bool
 	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
 
-config CORGI_SSP_DEPRECATED
+config SHARPSL_PM_MAX1111
 	bool
-	select PXA_SSP
-	help
-	  This option will include corgi_ssp.c and corgi_lcd.c
-	  that corgi_ts.c and other legacy drivers (corgi_bl.c
-	  and sharpsl_pm.c) may depend on.
+	depends on !CORGI_SSP_DEPRECATED
+	select HWMON
+	select SENSORS_MAX1111
 
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
 	select SHARP_LOCOMO
-	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +510,11 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_ICONTROL
+	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	select CPU_PXA320
+	select PXA3xx
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -517,7 +540,6 @@ config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -526,7 +548,6 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -543,11 +564,16 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
-	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
+config MACH_ZIPIT2
+	bool "Zipit Z2 Handheld"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 endmenu
 
 config PXA25x
@@ -612,23 +638,16 @@ config CPU_PXA950
 
 config PXA_SHARP_C7xx
 	bool
-	select PXA_SSP
 	select SHARPSL_PM
 	help
 	  Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
 	bool
-	select PXA_SSP
 	select SHARPSL_PM
 	help
 	  Enable common support for Sharp Cxx00 models
 
-config PXA_SSP
-	tristate
-	help
-	  Enable support for PXA2xx SSP ports
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
@@ -637,6 +656,18 @@ config TOSA_BT
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on tosa.
 
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+
 config PXA_HAVE_BOARD_IRQS
 	bool
 
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda..b8f1f4b 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
 endif
 
 # Generic drivers that other drivers may depend upon
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -48,6 +47,7 @@ obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
 endif
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
@@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
 
 # End-user Products
 obj-$(CONFIG_MACH_H4700)	+= hx4700.o
@@ -79,9 +80,9 @@ obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
 obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
+obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -89,6 +90,10 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
+obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 4bd10a1..993d75e 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -288,7 +288,7 @@ int __init am300_init(void)
 }
 
 module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
 
 MODULE_DESCRIPTION("board driver for am300 epd kit");
 MODULE_AUTHOR("Jaya Kumar");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07c..f3b5ace 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@ static void __init balloon3_init_irq(void)
 		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
+static unsigned long balloon3_ac97_pin_config[] = {
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO113_AC97_nRESET,
+};
+
 static void balloon3_backlight_power(int on)
 {
 	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@ static void balloon3_backlight_power(int on)
 
 static unsigned long balloon3_lcd_pin_config[] = {
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	GPIO99_GPIO,		/* Backlight */
 };
@@ -311,8 +300,10 @@ static void __init balloon3_init(void)
 	pxa_set_stuart_info(NULL);
 
 	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
 		pxa_set_ac97_info(NULL);
+	}
 
 	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
 		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 0000000..aae5446
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+	[0] = {
+	       .start = 0x11000020,
+	       .end = 0x1100003f,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = 0x1100001c,
+	       .end = 0x1100001c,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+	}
+};
+
+static struct platform_device capc7117_ide_device = {
+	.name = "pata_platform",
+	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
+	.resource = capc7117_ide_resources,
+	.dev = {
+		.platform_data = &pata_platform_data,
+		.coherent_dma_mask = ~0		/* grumble */
+	}
+};
+
+static void __init capc7117_ide_init(void)
+{
+	platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
+					UPF_IOREMAP | \
+					UPF_BUGGY_UART | \
+					UPF_SKIP_TEST)
+#define	TI16C752_UARTCLK	(22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+	[0] = {
+	       .mapbase = 0x14000000,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[1] = {
+	       .mapbase = 0x14000040,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[2] = {
+	       .mapbase = 0x14000080,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[3] = {
+	       .mapbase = 0x140000c0,
+	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irqflags = IRQF_TRIGGER_RISING,
+	       .flags = TI16C752_FLAGS,
+	       .iotype = UPIO_MEM,
+	       .regshift = 1,
+	       .uartclk = TI16C752_UARTCLK
+	},
+	[4] = {
+	       /* end of array */
+	}
+};
+
+static struct platform_device ti16c752_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = ti16c752_platform_data
+	}
+};
+
+static void __init capc7117_uarts_init(void)
+{
+	platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+	/* Init CoM */
+	mxm_8x10_barebones_init();
+
+	/* Init evaluation board peripherals */
+	mxm_8x10_ac97_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	capc7117_uarts_init();
+	capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+	.phys_io = 0x40000000,
+	.boot_params = 0xa0000100,
+	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io = pxa_map_io,
+	.init_irq = pxa3xx_init_irq,
+	.timer = &pxa_timer,
+	.init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index 49ae382..abba008 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -78,11 +78,3 @@ const struct clkops clk_cken_ops = {
 	.enable		= clk_cken_enable,
 	.disable	= clk_cken_disable,
 };
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
-	int i;
-
-	for (i = 0; i < num; i++)
-		clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 978a366..d848874 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -67,7 +67,3 @@ extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
-void clks_register(struct clk_lookup *clks, size_t num);
-int clk_add_alias(const char *alias, const char *alias_name, char *id,
-	struct device *dev);
-
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76..f1a7703 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@ static unsigned long cmx255_pin_config[] = {
 	GPIO47_STUART_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* SSP1 */
 	GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6..a9926bb 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* I2C */
 	GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@ static struct resource cmx270_2700G_resource[] = {
 	},
 };
 
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+	GPIO76_GPIO,
+	GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+	GPIOxx_LCD_TFT_16BPP,
+};
 
 static int cmx270_marathon_probe(struct fb_info *fb)
 {
-	/* save PXA-270 pin settings before enabling 2700G */
-	save_lcd_regs[0] = GPDR1;
-	save_lcd_regs[1] = GPDR2;
-	save_lcd_regs[2] = GAFR1_U;
-	save_lcd_regs[3] = GAFR2_L;
-	save_lcd_regs[4] = GAFR2_U;
-
-	/* Disable PXA-270 on-chip controller driving pins */
-	GPDR1 &= ~(0xfc000000);
-	GPDR2 &= ~(0x00c03fff);
-	GAFR1_U &= ~(0xfff00000);
-	GAFR2_L &= ~(0x0fffffff);
-	GAFR2_U &= ~(0x0000f000);
+	int gpio, err;
+
+	for (gpio = 58; gpio <= 77; gpio++) {
+		err = gpio_request(gpio, "LCD");
+		if (err)
+			return err;
+		gpio_direction_input(gpio);
+	}
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
 	return 0;
 }
 
 static int cmx270_marathon_remove(struct fb_info *fb)
 {
-	GPDR1 =   save_lcd_regs[0];
-	GPDR2 =   save_lcd_regs[1];
-	GAFR1_U = save_lcd_regs[2];
-	GAFR2_L = save_lcd_regs[3];
-	GAFR2_U = save_lcd_regs[4];
+	int gpio;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+	for (gpio = 58; gpio <= 77; gpio++)
+		gpio_free(gpio);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3..161fc2d 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+	desc->chip->ack(irq);
 
 	it8152_irq_demux(irq, desc);
 }
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index d37cfa1..fdda6be 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -30,6 +30,9 @@
 #include <linux/i2c/pca953x.h>
 
 #include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
@@ -430,7 +433,7 @@ static inline void cm_x300_init_nand(void) {}
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO82_MMC_IRQ,
 	.gpio_card_ro		= GPIO85_MMC_WP,
@@ -451,7 +454,7 @@ static void cm_x300_mci2_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 			= cm_x300_mci2_init,
 	.exit			= cm_x300_mci2_exit,
@@ -584,12 +587,87 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
+/* Battery */
+struct power_supply_info cm_x300_psy_info = {
+	.name = "battery",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void cm_x300_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void cm_x300_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info cm_x300_battery_info = {
+	.battery_info = &cm_x300_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = cm_x300_battery_low,
+	.battery_critical = cm_x300_battery_critical,
+};
+
+static struct regulator_consumer_supply buck2_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc_core",
+	},
+};
+
+static struct regulator_init_data buck2_data = {
+	.constraints = {
+		.min_uV = 1375000,
+		.max_uV = 1375000,
+		.state_mem = {
+			.enabled = 0,
+		},
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
+	.consumer_supplies = buck2_consumers,
+};
+
 /* DA9030 */
 struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
 	{
-		.name = "da903x-backlight",
-		.id = DA9030_ID_WLED,
-	}
+		.name = "da903x-battery",
+		.id = DA9030_ID_BAT,
+		.platform_data = &cm_x300_battery_info,
+	},
+	{
+		.name = "da903x-regulator",
+		.id = DA9030_ID_BUCK2,
+		.platform_data = &buck2_data,
+	},
 };
 
 static struct da903x_platform_data cm_x300_da9030_info = {
@@ -599,7 +677,7 @@ static struct da903x_platform_data cm_x300_da9030_info = {
 
 static struct i2c_board_info cm_x300_pmic_info = {
 	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_GPIO(0),
+	.irq = IRQ_WAKEUP0,
 	.platform_data = &cm_x300_da9030_info,
 };
 
@@ -689,13 +767,13 @@ static void __init cm_x300_init(void)
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 				 char **cmdline, struct meminfo *mi)
 {
-	mi->nr_banks = 2;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
-	mi->bank[0].size = (64*1024*1024);
-	mi->bank[1].start = 0xc0000000;
-	mi->bank[1].node = 0;
-	mi->bank[1].size = (64*1024*1024);
+	/* Make sure that mi->bank[0].start = PHYS_ADDR */
+	for (; tags->hdr.size; tags = tag_next(tags))
+		if (tags->hdr.tag == ATAG_MEM &&
+			tags->u.mem.start == 0x80000000) {
+			tags->u.mem.start = 0xa0000000;
+			break;
+		}
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 45c23fd..40b6ac2 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -26,6 +26,7 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,7 @@ static void __init colibri_pxa300_init_lcd(void)
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index e6c0a22..199afa2 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -96,7 +96,7 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init			= colibri_pxa3xx_mci_init,
 	.exit			= colibri_pxa3xx_mci_exit,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index da3156d86..51ffa6a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -106,18 +106,18 @@ static unsigned long corgi_pin_config[] __initdata = {
 	GPIO8_MMC_CS0,
 
 	/* GPIO Matrix Keypad */
-	GPIO66_GPIO,	/* column 0 */
-	GPIO67_GPIO,	/* column 1 */
-	GPIO68_GPIO,	/* column 2 */
-	GPIO69_GPIO,	/* column 3 */
-	GPIO70_GPIO,	/* column 4 */
-	GPIO71_GPIO,	/* column 5 */
-	GPIO72_GPIO,	/* column 6 */
-	GPIO73_GPIO,	/* column 7 */
-	GPIO74_GPIO,	/* column 8 */
-	GPIO75_GPIO,	/* column 9 */
-	GPIO76_GPIO,	/* column 10 */
-	GPIO77_GPIO,	/* column 11 */
+	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
+	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
+	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
 	GPIO58_GPIO,	/* row 0 */
 	GPIO59_GPIO,	/* row 1 */
 	GPIO60_GPIO,	/* row 2 */
@@ -128,13 +128,20 @@ static unsigned long corgi_pin_config[] __initdata = {
 	GPIO65_GPIO,	/* row 7 */
 
 	/* GPIO */
-	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
-	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
-	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
-	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
+	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
+	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
+	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
+	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
+	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
+	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
+
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
 };
 
 /*
@@ -437,8 +444,9 @@ static struct platform_device corgiled_device = {
  * to give the card a chance to fully insert/eject.
  */
 static struct pxamci_platform_data corgi_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
@@ -672,6 +680,15 @@ static void __init corgi_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	/* allow wakeup from various GPIOs */
+	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+	if (!machine_is_corgi())
+		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
@@ -679,7 +696,6 @@ static void __init corgi_init(void)
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
deleted file mode 100644
index d9b9631..0000000
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- *   Corgi - LCD to ATI Imageon w100 (Wallaby)
- *   Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/sharpsl.h>
-#include <mach/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS     0x00
-#define PHACTRL_ADRS    0x01
-#define DUTYCTRL_ADRS   0x02
-#define POWERREG0_ADRS  0x03
-#define POWERREG1_ADRS  0x04
-#define GPOR3_ADRS      0x05
-#define PICTRL_ADRS     0x06
-#define POLCTRL_ADRS    0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA     0x01
-#define RESCTL_VGA      0x00
-
-#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
-#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
-#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE      0x01
-#define PICTRL_INIOFF          0x02
-#define PICTRL_POWER_DOWN      0x04
-#define PICTRL_COM_SIGNAL_OFF  0x08
-#define PICTRL_DAC_SIGNAL_OFF  0x10
-
-#define POLCTRL_SYNC_POL_FALL  0x01
-#define POLCTRL_EN_POL_FALL    0x02
-#define POLCTRL_DATA_POL_FALL  0x04
-#define POLCTRL_SYNC_ACT_H     0x08
-#define POLCTRL_EN_ACT_L       0x10
-
-#define POLCTRL_SYNC_POL_RISE  0x00
-#define POLCTRL_EN_POL_RISE    0x00
-#define POLCTRL_DATA_POL_RISE  0x00
-#define POLCTRL_SYNC_ACT_L     0x00
-#define POLCTRL_EN_ACT_H       0x00
-
-#define PHACTRL_PHASE_MANUAL   0x01
-#define DEFAULT_PHAD_QVGA     (9)
-#define DEFAULT_COMADJ        (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
-	udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
-	lcdtg_ssp_i2c_send(data);
-	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
-	lcdtg_ssp_i2c_send(base);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
-	int i;
-	for (i = 0; i < 8; i++) {
-		if (data & 0x80)
-			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
-		else
-			lcdtg_i2c_send_bit(base);
-		data <<= 1;
-	}
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
-	lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
-	/* Set Common Voltage to M62332FP via I2C */
-	lcdtg_i2c_send_start(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x9c);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x00);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, data);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
-	int adj;
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Setting for VGA */
-			adj = sharpsl_param.phadadj;
-			if (adj < 0) {
-				adj = PHACTRL_PHASE_MANUAL;
-			} else {
-				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
-			}
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Setting for QVGA */
-			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
-			break;
-	}
-
-	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
-	if (!lcd_inited) {
-		int comadj;
-
-		/* Initialize Internal Logic & Port */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
-	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-		/* VDD(+8V), SVSS(-4V) ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-		mdelay(3);
-
-		/* DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		/* INIB = H, INI = L  */
-		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
-		/* Set Common Voltage */
-		comadj = sharpsl_param.comadj;
-		if (comadj < 0)
-			comadj = DEFAULT_COMADJ;
-		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
-		/* VCC5 ON, DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
-				POWER0_COM_OFF | POWER0_VCC5_ON);
-
-		/* GVSS(-8V) ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-		mdelay(2);
-
-		/* COM SIGNAL ON (PICTL[3] = L) */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
-		/* COM ON, DAC ON, VCC5_ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_ON | POWER0_VCC5_ON);
-
-		/* VW ON, GVSS ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-		/* Signals output enable */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
-		/* Set Phase Adjust */
-		lcdtg_set_phadadj(mode);
-
-		/* Initialize for Input Signals from ATI */
-		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
-				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
-		udelay(1000);
-
-		lcd_inited=1;
-	} else {
-		lcdtg_set_phadadj(mode);
-	}
-
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Set Lcd Resolution (VGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Set Lcd Resolution (QVGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
-			break;
-	}
-}
-
-void corgi_lcdtg_suspend(void)
-{
-	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
-	mdelay(34);
-
-	/* (1)VW OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-	/* (2)COM OFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
-	/* (3)Set Common Voltage Bias 0V */
-	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
-	/* (4)GVSS OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
-	/* (5)VCC5 OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (6)Set PDWN, INIOFF, DACOFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
-			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
-	/* (7)DAC OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (8)VDD OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-	lcd_inited = 0;
-}
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index d4a0733..3f1dc74 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
@@ -25,7 +26,8 @@
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+
+#include "generic.h"
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -35,87 +37,46 @@
 #define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
 #define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
 
+static struct gpio charger_gpios[] = {
+	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
+	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
+};
+
 static void corgi_charger_init(void)
 {
-	pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
+	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
 }
 
 static void corgi_measure_temp(int on)
 {
-	if (on)
-		GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
-	else
-		GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
+	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
 }
 
 static void corgi_charge(int on)
 {
 	if (on) {
 		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-			GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
 		} else {
-			GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-			GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
+			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
 		}
 	} else {
-		GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-		GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
 	}
 }
 
 static void corgi_discharge(int on)
 {
-	if (on)
-		GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
-	else
-		GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
+	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
 }
 
 static void corgi_presuspend(void)
 {
-	int i;
-	unsigned long wakeup_mask;
-
-	/* charging , so CHARGE_ON bit is HIGH during OFF. */
-	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON))
-		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON);
-	else
-		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON);
-
-	if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE))
-		PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE);
-	else
-		PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE);
-
-	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
-		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
-	else
-		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
-
-	/* Resume on keyboard power key */
-	PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
-
-	wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL);
-
-	if (!machine_is_corgi())
-		wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW);
-
-	PWER = wakeup_mask | PWER_RTC;
-	PRER = wakeup_mask;
-	PFER = wakeup_mask;
-
-	for (i = 0; i <=15; i++) {
-		if (PRER & PFER & GPIO_bit(i)) {
-			if (GPLR0 & GPIO_bit(i) )
-				PRER &= ~GPIO_bit(i);
-			else
-				PFER &= ~GPIO_bit(i);
-		}
-	}
 }
 
 static void corgi_postsuspend(void)
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
deleted file mode 100644
index a5ee707..0000000
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  SSP control code for Sharp Corgi devices
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/ssp.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- *   1. A touchscreen controller (TI ADS7846 compatible)
- *   2. An LCD controller (with some Backlight functionality)
- *   3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- *  ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
-	unsigned long flag;
-	u32 ret = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
-	ssp_write_word(&corgi_ssp_dev,data);
- 	ssp_read_word(&corgi_ssp_dev, &ret);
-
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
-	spin_lock(&corgi_ssp_lock);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
-	ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
-	u32 ret = 0;
-	ssp_read_word(&corgi_ssp_dev, &ret);
-	return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- *  LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
-	unsigned long flag, sscr1 = SSCR1_SPH;
-	u32 tmp;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-
-	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
-		sscr1 = 0;
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
-	ssp_enable(&corgi_ssp_dev);
-
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-	ssp_write_word(&corgi_ssp_dev,data);
-	/* Read null data back from device to prevent SSP overflow */
-	ssp_read_word(&corgi_ssp_dev, &tmp);
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
-	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
-	corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- *  Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
-	unsigned long flag;
-	long voltage = 0, voltage1 = 0, voltage2 = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
-	ssp_enable(&corgi_ssp_dev);
-
-	udelay(1);
-
-	/* TB1/RB1 */
-	ssp_write_word(&corgi_ssp_dev,data);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
-	/* TB12/RB2 */
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
-	/* TB13/RB3*/
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	if (voltage1 & 0xc0 || voltage2 & 0x3f)
-		voltage = -1;
-	else
-		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
-	return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- *  Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
-	ssp_machinfo = machinfo;
-}
-
-static int __init corgi_ssp_probe(struct platform_device *dev)
-{
-	int ret;
-
-	/* Chip Select - Disable All */
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_max1111 >= 0)
-	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
-	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
-	if (ret)
-		printk(KERN_ERR "Unable to register SSP handler!\n");
-	else {
-		ssp_disable(&corgi_ssp_dev);
-		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-		ssp_enable(&corgi_ssp_dev);
-	}
-
-	return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
-	ssp_exit(&corgi_ssp_dev);
-	return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
-	ssp_flush(&corgi_ssp_dev);
-	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
-	return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-	ssp_enable(&corgi_ssp_dev);
-
-	return 0;
-}
-
-static struct platform_driver corgissp_driver = {
-	.probe		= corgi_ssp_probe,
-	.remove		= corgi_ssp_remove,
-	.suspend	= corgi_ssp_suspend,
-	.resume		= corgi_ssp_resume,
-	.driver		= {
-		.name	= "corgi-ssp",
-	},
-};
-
-int __init corgi_ssp_init(void)
-{
-	return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 9e4d981..268a9bc 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -256,13 +256,9 @@ static void init_sdram_rows(void)
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 dri = 0;
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
 
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
-	return dri;
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
 }
 
 /* find a valid frequency point */
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 149cdd9..27fa329 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
+#include <linux/slab.h>
 
 #include <mach/pxa3xx-regs.h>
 
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 88575b8..91fd4fe 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -125,18 +125,9 @@ static unsigned long csb726_pin_config[] = {
 	GPIO118_I2C_SDA,
 };
 
-static struct pxamci_platform_data csb726_mci_data;
-
-static int csb726_mci_init(struct device *dev,
-		irq_handler_t detect, void *data)
-{
-	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-	return 0;
-}
-
 static struct pxamci_platform_data csb726_mci = {
+	.detect_delay_ms	= 500,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init			= csb726_mci_init,
 	/* FIXME setpower */
 	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
 	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9..d578021 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
 	GPIO40_GPIO,  /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce..af83caa 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* Audio power control */
 	GPIO4_GPIO,  /* Headphone amp power */
 	GPIO7_GPIO,  /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129b..8ea97bf 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
 static struct w100_gen_regs e800_lcd_regs = {
 	.lcd_format =            0x00008003,
 	.lcdd_cntl1 =            0x02a00000,
@@ -195,6 +203,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc..0517c17 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@ static unsigned long common_pin_config[] = {
 	GPIO111_MMC_DAT_3,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO84_CIF_FV,
@@ -645,6 +626,7 @@ static int em_x270_mci_get_ro(struct device *dev)
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
 				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
 				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
@@ -662,7 +644,6 @@ static void __init em_x270_init_mmc(void)
 	if (machine_is_em_x270())
 		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
 
-	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 91417f0..96ed130 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -128,6 +128,6 @@ static struct clk_lookup eseries_clkregs[] = {
 
 void eseries_register_clks(void)
 {
-	clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 3126a35..baabb3c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,7 +28,6 @@
 
 #include <mach/reset.h>
 #include <mach/gpio.h>
-#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -128,33 +127,3 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
-
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
-	unsigned long flags;
-	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
-
-	if (gpio > pxa_last_gpio)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	if (gpio_mode & GPIO_DFLT_LOW)
-		GPCR(gpio) = GPIO_bit(gpio);
-	else if (gpio_mode & GPIO_DFLT_HIGH)
-		GPSR(gpio) = GPIO_bit(gpio);
-	if (gpio_mode & GPIO_MD_MASK_DIR)
-		GPDR(gpio) |= GPIO_bit(gpio);
-	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-	local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 0000000..5ccb0ce
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1	(15)
+#define ICONTROL_MCP251x_nCS2	(16)
+#define ICONTROL_MCP251x_nCS3	(17)
+#define ICONTROL_MCP251x_nCS4	(24)
+
+#define ICONTROL_MCP251x_nIRQ1	(74)
+#define ICONTROL_MCP251x_nIRQ2	(75)
+#define ICONTROL_MCP251x_nIRQ3	(76)
+#define ICONTROL_MCP251x_nIRQ4	(77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+	.tx_threshold   = 8,
+	.rx_threshold   = 128,
+	.dma_burst_size = 8,
+	.timeout        = 235,
+	.gpio_cs        = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 16E6,
+	.board_specific_setup = NULL,
+	.power_enable         = NULL,
+	.transceiver_enable   = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info1,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+	},
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 3,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info2,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+	},
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info3,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+	},
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 4,
+		.chip_select     = 1,
+		.platform_data   = &mcp251x_info,
+		.controller_data = &mcp251x_chip_info4,
+		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+	}
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+	.clock_enable   = CKEN_SSP3,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+	.clock_enable   = CKEN_SSP4,
+	.num_chipselect = 2,
+	.enable_dma     = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+	.name          = "pxa2xx-spi",
+	.id            = 3,
+	.dev           = {
+		.platform_data = &pxa_ssp3_spi_master_info,
+	}
+};
+
+struct platform_device pxa_spi_ssp4 = {
+	.name          = "pxa2xx-spi",
+	.id            = 4,
+	.dev           = {
+		.platform_data = &pxa_ssp4_spi_master_info,
+	}
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+	&pxa_spi_ssp3,
+	&pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+	/* CAN CS lines */
+	GPIO15_GPIO,
+	GPIO16_GPIO,
+	GPIO17_GPIO,
+	GPIO24_GPIO,
+
+	/* SPI (SSP3) lines */
+	GPIO89_SSP3_SCLK,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
+	/* SPI (SSP4) lines */
+	GPIO93_SSP4_SCLK,
+	GPIO95_SSP4_TXD,
+	GPIO96_SSP4_RXD,
+
+	/* CAN nIRQ lines */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+	mxm_8x10_barebones_init();
+	mxm_8x10_usb_host_init();
+	mxm_8x10_mmc_init();
+
+	icontrol_can_init();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= icontrol_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5c9e11d..bc78c4d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -47,25 +47,7 @@
 
 static unsigned long idp_pin_config[] __initdata = {
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 5b0862d..5161dca 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -64,7 +64,6 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO116_GPIO,			/* CC_CCA */
 	GPIO0_GPIO,			/* CC_FIFOP */
 	GPIO16_GPIO,			/* CCSFD */
-	GPIO39_GPIO,			/* CSn */
 	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
@@ -72,7 +71,7 @@ static unsigned long imote2_pin_config[] __initdata = {
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, 			/* Chip Select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
@@ -560,10 +559,6 @@ static void __init imote2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	/* SPI chip select directions - all other directions should
-	 * be handled by drivers.*/
-	gpio_direction_output(37, 0);
-
 	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
 
 	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index bfec09b..1a74106 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -129,6 +129,16 @@ enum balloon3_features {
 #define CPLD_AROUTING_LOONR2INT_BIT    6
 #define CPLD_AROUTING_LOONR2EXT_BIT    7
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 31abe6d..6709b1c 100644
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -35,8 +35,6 @@
 #define PXA_CAMERA_VSP		0x400
 
 struct pxacamera_platform_data {
-	int (*init)(struct device *);
-
 	unsigned long flags;
 	unsigned long mclk_10khz;
 };
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 811743c..5f2ba8d 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -2,6 +2,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
+#include <mach/mfp.h>
 
 /*
  * common settings for all modules
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 7239281..585970e 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -113,7 +113,6 @@
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 55d6a17..01cf813 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x40000000		@ physical
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index e741bf1..3d8d8cb 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -202,7 +202,7 @@
 #define __cpu_is_pxa950(id)                             \
 	({                                              \
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		id == 0x697;				\
+		_id == 0x697;				\
 	 })
 #else
 #define __cpu_is_pxa950(id)	(0)
@@ -314,7 +314,6 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
-#define HAVE_ARCH_PCI_SET_DMA_MASK	1
 #endif
 
 
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3677a9a..ffc8314 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -135,82 +135,6 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
@@ -219,89 +143,16 @@
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS			(IRQ_BOARD_END)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
-#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
 /* add IT8152 IRQs beyond BOARD_END */
 #ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
 
 #if NR_IRQS < (IT8152_LAST_IRQ+1)
 #undef NR_IRQS
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index f89fb71..0e6440c 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -34,5 +34,9 @@
 #define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
 #define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
 
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 751b748..a0d4247 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -34,6 +34,17 @@
 #define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
 #define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
+/* Board specific IRQs */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 3461c43..86e623a 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -117,4 +117,21 @@
 #define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
 #define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
 
+/* board specific IRQs */
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 9c78785..cafadc3 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -190,4 +190,36 @@
 #define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 #endif	/* CONFIG_CPU_PXA26x */
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 6543c05..ec0f0b0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -434,5 +434,32 @@
 #define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
 #define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP	\
+	GPIO58_LCD_LDD_0,	\
+	GPIO59_LCD_LDD_1,	\
+	GPIO60_LCD_LDD_2,	\
+	GPIO61_LCD_LDD_3,	\
+	GPIO62_LCD_LDD_4,	\
+	GPIO63_LCD_LDD_5,	\
+	GPIO64_LCD_LDD_6,	\
+	GPIO65_LCD_LDD_7,	\
+	GPIO66_LCD_LDD_8,	\
+	GPIO67_LCD_LDD_9,	\
+	GPIO68_LCD_LDD_10,	\
+	GPIO69_LCD_LDD_11,	\
+	GPIO70_LCD_LDD_12,	\
+	GPIO71_LCD_LDD_13,	\
+	GPIO72_LCD_LDD_14,	\
+	GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP	\
+	GPIOxx_LCD_16BPP,	\
+	GPIO74_LCD_FCLK,	\
+	GPIO75_LCD_LCLK,	\
+	GPIO76_LCD_PCLK,	\
+	GPIO77_LCD_BIAS
+
+
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index 658b28e..c54cef2 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -25,6 +25,8 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
+
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
 #define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
 #define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 02a69dc..9eb515b 100644
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -9,7 +9,7 @@ struct mmc_host;
 
 struct pxamci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
+	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
 	int (*init)(struct device *, irq_handler_t , void *);
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h
new file mode 100644
index 0000000..ffa1566
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS	0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4dcd2e8..0408326 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,13 @@
  * Definitions of CPU card resources only
  */
 
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
deleted file mode 100644
index 1209c44..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
+++ /dev/null
@@ -1,375 +0,0 @@
-#ifndef __ASM_ARCH_PXA2XX_GPIO_H
-#define __ASM_ARCH_PXA2XX_GPIO_H
-
-#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
-
-#include <mach/gpio.h>
-
-/* GPIO alternate function assignments */
-
-#define GPIO1_RST		1	/* reset */
-#define GPIO6_MMCCLK		6	/* MMC Clock */
-#define GPIO7_48MHz		7	/* 48 MHz clock output */
-#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
-#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
-#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
-#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
-#define GPIO12_32KHz		12	/* 32 kHz out */
-#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
-#define GPIO13_MBGNT		13	/* memory controller grant */
-#define GPIO14_MBREQ		14	/* alternate bus master request */
-#define GPIO15_nCS_1		15	/* chip select 1 */
-#define GPIO16_PWM0		16	/* PWM0 output */
-#define GPIO17_PWM1		17	/* PWM1 output */
-#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
-#define GPIO18_RDY		18	/* Ext. Bus Ready */
-#define GPIO19_DREQ1		19	/* External DMA Request */
-#define GPIO20_DREQ0		20	/* External DMA Request */
-#define GPIO23_SCLK		23	/* SSP clock */
-#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
-#define GPIO24_SFRM		24	/* SSP Frame */
-#define GPIO24_CIF_FV		24	/* Camera frame start signal */
-#define GPIO25_STXD		25	/* SSP transmit */
-#define GPIO25_CIF_LV		25	/* Camera line start signal */
-#define GPIO26_SRXD		26	/* SSP receive */
-#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
-#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
-#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
-#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
-#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
-#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
-#define GPIO31_SYNC		31	/* AC97/I2S sync */
-#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
-#define GPIO32_SYSCLK		32	/* I2S System Clock */
-#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
-#define GPIO33_nCS_5		33	/* chip select 5 */
-#define GPIO34_FFRXD		34	/* FFUART receive */
-#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
-#define GPIO35_FFCTS		35	/* FFUART Clear to send */
-#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
-#define GPIO37_FFDSR		37	/* FFUART data set ready */
-#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
-#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
-#define GPIO39_FFTXD		39	/* FFUART transmit data */
-#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
-#define GPIO41_FFRTS		41	/* FFUART request to send */
-#define GPIO42_BTRXD		42	/* BTUART receive data */
-#define GPIO42_HWRXD		42	/* HWUART receive data */
-#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
-#define GPIO43_BTTXD		43	/* BTUART transmit data */
-#define GPIO43_HWTXD		43	/* HWUART transmit data */
-#define GPIO43_CIF_FV		43	/* Camera frame start signal */
-#define GPIO44_BTCTS		44	/* BTUART clear to send */
-#define GPIO44_HWCTS		44	/* HWUART clear to send */
-#define GPIO44_CIF_LV		44	/* Camera line start signal */
-#define GPIO45_BTRTS		45	/* BTUART request to send */
-#define GPIO45_HWRTS		45	/* HWUART request to send */
-#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
-#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
-#define GPIO46_ICPRXD		46	/* ICP receive data */
-#define GPIO46_STRXD		46	/* STD_UART receive data */
-#define GPIO47_ICPTXD		47	/* ICP transmit data */
-#define GPIO47_STTXD		47	/* STD_UART transmit data */
-#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
-#define GPIO48_nPOE		48	/* Output Enable for Card Space */
-#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
-#define GPIO49_nPWE		49	/* Write Enable for Card Space */
-#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
-#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
-#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
-#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
-#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
-#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
-#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
-#define GPIO53_MMCCLK		53	/* MMC Clock */
-#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
-#define GPIO54_MMCCLK		54	/* MMC Clock */
-#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
-#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
-#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
-#define GPIO55_nPREG		55	/* Card Address bit 26 */
-#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
-#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
-#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
-#define GPIO58_LDD_0		58	/* LCD data pin 0 */
-#define GPIO59_LDD_1		59	/* LCD data pin 1 */
-#define GPIO60_LDD_2		60	/* LCD data pin 2 */
-#define GPIO61_LDD_3		61	/* LCD data pin 3 */
-#define GPIO62_LDD_4		62	/* LCD data pin 4 */
-#define GPIO63_LDD_5		63	/* LCD data pin 5 */
-#define GPIO64_LDD_6		64	/* LCD data pin 6 */
-#define GPIO65_LDD_7		65	/* LCD data pin 7 */
-#define GPIO66_LDD_8		66	/* LCD data pin 8 */
-#define GPIO66_MBREQ		66	/* alternate bus master req */
-#define GPIO67_LDD_9		67	/* LCD data pin 9 */
-#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
-#define GPIO68_LDD_10		68	/* LCD data pin 10 */
-#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
-#define GPIO69_LDD_11		69	/* LCD data pin 11 */
-#define GPIO69_MMCCLK		69	/* MMC_CLK */
-#define GPIO70_LDD_12		70	/* LCD data pin 12 */
-#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
-#define GPIO71_LDD_13		71	/* LCD data pin 13 */
-#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
-#define GPIO72_LDD_14		72	/* LCD data pin 14 */
-#define GPIO72_32kHz		72	/* 32 kHz clock */
-#define GPIO73_LDD_15		73	/* LCD data pin 15 */
-#define GPIO73_MBGNT		73	/* Memory controller grant */
-#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
-#define GPIO75_LCD_LCLK		75	/* LCD line clock */
-#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
-#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
-#define GPIO78_nCS_2		78	/* chip select 2 */
-#define GPIO79_nCS_3		79	/* chip select 3 */
-#define GPIO80_nCS_4		80	/* chip select 4 */
-#define GPIO81_NSCLK		81	/* NSSP clock */
-#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
-#define GPIO82_NSFRM		82	/* NSSP Frame */
-#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
-#define GPIO83_NSTXD		83	/* NSSP transmit */
-#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
-#define GPIO84_NSRXD		84	/* NSSP receive */
-#define GPIO84_CIF_FV		84	/* Camera frame start signal */
-#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
-#define GPIO85_CIF_LV		85	/* Camera line start signal */
-#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
-#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
-#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
-#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
-#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
-#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
-#define GPIO96_FFRXD		96	/* FFUART recieve */
-#define GPIO98_FFRTS		98	/* FFUART request to send */
-#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
-#define GPIO99_FFTXD		99	/* FFUART transmit data */
-#define GPIO100_FFCTS		100	/* FFUART Clear to send */
-#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
-#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
-#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
-#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
-#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
-#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
-#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
-#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
-#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
-#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
-#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
-#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
-#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
-#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
-#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
-#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
-#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
-#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
-
-/* GPIO alternate function mode & direction */
-
-#define GPIO_IN			0x000
-#define GPIO_OUT		0x080
-#define GPIO_ALT_FN_1_IN	0x100
-#define GPIO_ALT_FN_1_OUT	0x180
-#define GPIO_ALT_FN_2_IN	0x200
-#define GPIO_ALT_FN_2_OUT	0x280
-#define GPIO_ALT_FN_3_IN	0x300
-#define GPIO_ALT_FN_3_OUT	0x380
-#define GPIO_MD_MASK_NR		0x07f
-#define GPIO_MD_MASK_DIR	0x080
-#define GPIO_MD_MASK_FN		0x300
-#define GPIO_DFLT_LOW		0x400
-#define GPIO_DFLT_HIGH		0x800
-
-#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
-#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
-#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
-#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
-#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
-#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
-#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
-#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
-#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
-#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
-#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
-#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
-#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
-#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
-#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
-#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
-#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
-#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
-#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
-#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
-#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
-#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
-#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
-#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
-#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
-#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
-#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
-#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
-#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
-#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
-#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
-#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
-#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
-#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
-#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
-#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
-#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
-#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
-#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
-#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
-#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
-#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
-#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
-#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
-#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
-#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
-#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
-#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
-#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
-#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
-#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
-#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
-#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
-#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
-#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
-#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
-#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
-#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
-#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
-#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
-#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
-#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
-#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
-#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
-#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
-#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
-#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
-#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
-#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
-#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
-#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
-#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
-#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
-#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
-#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
-#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
-#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
-#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
-#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
-#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
-#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
-#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
-#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
-#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
-#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
-#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
-#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
-#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
-#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
-#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
-#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
-#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
-#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
-#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
-#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
-#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
-#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
-#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
-#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
-#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
-#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
-#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
-#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
-#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
-#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
-#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
-#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
-#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
-#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
-#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
-#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
-#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
-#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
-#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
-#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
-#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
-#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
-#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
-#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
-#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
-#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
-#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
-#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
-#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
-#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
-#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
-#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
-#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
-#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
-#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
-#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
-#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
-#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
-#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
-#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
-#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
-#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
-#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
-#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
-#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
-#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
-#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
-#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
-#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
-#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
deleted file mode 100644
index 6a2ed35..0000000
--- a/arch/arm/mach-pxa/include/mach/regs-ssp.h
+++ /dev/null
@@ -1,134 +0,0 @@
-#ifndef __ASM_ARCH_REGS_SSP_H
-#define __ASM_ARCH_REGS_SSP_H
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0		(0x00)  /* SSP Control Register 0 */
-#define SSCR1		(0x04)  /* SSP Control Register 1 */
-#define SSSR		(0x08)  /* SSP Status Register */
-#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
-#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
-
-#define SSTO		(0x28)  /* SSP Time Out Register */
-#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
-#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
-#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
-#define SSTSS		(0x38)  /* SSP Timeslot Status */
-#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
-
-#if defined(CONFIG_PXA3xx)
-#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
-#endif
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
-#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
-#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National	(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS	(1 << 6)	/* External clock select */
-#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
-
-#if defined(CONFIG_PXA25x)
-#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
-#define SSCR0_NCS	(1 << 21)	/* Network clock select */
-#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
-#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
-#endif
-
-#if defined(CONFIG_PXA3xx)
-#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
-#endif
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
-
-#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
-#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
-#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
-#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
-#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
-#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
-#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
-#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
-#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
-#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
-#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
-#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
-#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
-#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
-#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
-
-#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
-#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
-#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
-#define SSSR_EOC		(1 << 20)	/* End Of Chain */
-#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
-#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
-
-#if defined(CONFIG_PXA3xx)
-#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
-#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
-#endif
-
-#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
-#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
-#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
-#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
-
-#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
-#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
-#if defined(CONFIG_PXA3xx)
-#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
-#endif
-
-
-#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
index 44b0b20..c15c0c5 100644
--- a/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -166,7 +166,8 @@
 #define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
 #define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
 #define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
 #define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
 #define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
 #define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
deleted file mode 100644
index cb5cb76..0000000
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- *       PXA250     SSP
- *       PXA255     SSP, NSSP
- *       PXA26x     SSP, NSSP, ASSP
- *       PXA27x     SSP1, SSP2, SSP3
- *       PXA3xx     SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
-
-#include <linux/list.h>
-#include <linux/io.h>
-
-enum pxa_ssp_type {
-	SSP_UNDEFINED = 0,
-	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-	PXA27x_SSP,
-};
-
-struct ssp_device {
-	struct platform_device *pdev;
-	struct list_head	node;
-
-	struct clk	*clk;
-	void __iomem	*mmio_base;
-	unsigned long	phys_base;
-
-	const char	*label;
-	int		port_id;
-	int		type;
-	int		use_count;
-	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
-};
-
-/*
- * SSP initialisation flags
- */
-#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
-
-struct ssp_state {
-	u32	cr0;
-	u32 cr1;
-	u32 to;
-	u32 psp;
-};
-
-struct ssp_dev {
-	struct ssp_device *ssp;
-	u32 port;
-	u32 mode;
-	u32 flags;
-	u32 psp_flags;
-	u32 speed;
-	int irq;
-};
-
-int ssp_write_word(struct ssp_dev *dev, u32 data);
-int ssp_read_word(struct ssp_dev *dev, u32 *data);
-int ssp_flush(struct ssp_dev *dev);
-void ssp_enable(struct ssp_dev *dev);
-void ssp_disable(struct ssp_dev *dev);
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
-int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
-int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
-void ssp_exit(struct ssp_dev *dev);
-
-/**
- * ssp_write_reg - Write to a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to write to
- * @val: Value to be written.
- */
-static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
-{
-	__raw_writel(val, dev->mmio_base + reg);
-}
-
-/**
- * ssp_read_reg - Read from a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to read from
- */
-static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
-{
-	return __raw_readl(dev->mmio_base + reg);
-}
-
-struct ssp_device *ssp_request(int port, const char *label);
-void ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 4df2d38..1bbd1f2 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -167,7 +167,7 @@
 
 #define TOSA_KEY_SYNC		KEY_102ND /* ??? */
 
-#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
 #define TOSA_KEY_RECORD		KEY_YEN
 #define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
 #define TOSA_KEY_CANCEL		KEY_ESC
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 237734b..759b851 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,20 +10,41 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
-#define __REG(x)       ((volatile unsigned long *)x)
+#define FFUART_BASE	(0x40100000)
+#define BTUART_BASE	(0x40200000)
+#define STUART_BASE	(0x40700000)
 
-static volatile unsigned long *UART = FFUART;
+static unsigned long uart_base;
+static unsigned int uart_shift;
+static unsigned int uart_is_pxa;
+
+static inline unsigned char uart_read(int offset)
+{
+	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+	/* assume enabled by default for non-PXA uarts */
+	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
 
 static inline void putc(char c)
 {
-	if (!(UART[UART_IER] & IER_UUE))
+	if (!uart_is_enabled())
 		return;
-	while (!(UART[UART_LSR] & LSR_TDRQ))
+
+	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
 		barrier();
-	UART[UART_TX] = c;
+
+	uart_write(c, UART_TX);
 }
 
 /*
@@ -35,10 +56,21 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
+	/* initialize to default */
+	uart_base = FFUART_BASE;
+	uart_shift = 2;
+	uart_is_pxa = 1;
+
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
 	    || machine_is_cm_x300() || machine_is_balloon3())
-		UART = STUART;
+		uart_base = STUART_BASE;
+
+	if (machine_is_arcom_zeus()) {
+		uart_base = 0x10000000;	/* nCS4 */
+		uart_shift = 1;
+		uart_is_pxa = 0;
+	}
 }
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
index e90c5ee..bfecfbf 100644
--- a/arch/arm/mach-pxa/include/mach/vmalloc.h
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -8,4 +8,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (0xe8000000)
+#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h
new file mode 100644
index 0000000..7bfa3dd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vpac270.h
@@ -0,0 +1,42 @@
+/*
+ * GPIOs and interrupts for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_VPAC270_H_
+#define _INCLUDE_VPAC270_H_
+
+#define	GPIO1_VPAC270_USER_BTN		1
+
+#define	GPIO15_VPAC270_LED_ORANGE	15
+
+#define	GPIO81_VPAC270_BKL_ON		81
+#define	GPIO83_VPAC270_NL_ON		83
+
+#define	GPIO52_VPAC270_SD_READONLY	52
+#define	GPIO53_VPAC270_SD_DETECT_N	53
+
+#define	GPIO84_VPAC270_PCMCIA_CD	84
+#define	GPIO35_VPAC270_PCMCIA_RDY	35
+#define	GPIO107_VPAC270_PCMCIA_PPEN	107
+#define	GPIO11_VPAC270_PCMCIA_RESET	11
+#define	GPIO17_VPAC270_CF_CD		17
+#define	GPIO12_VPAC270_CF_RDY		12
+#define	GPIO16_VPAC270_CF_RESET		16
+
+#define	GPIO41_VPAC270_UDC_DETECT	41
+
+#define	GPIO114_VPAC270_ETH_IRQ		114
+
+#define	GPIO36_VPAC270_IDE_IRQ		36
+
+#define	GPIO113_VPAC270_TS_IRQ		113
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
new file mode 100644
index 0000000..8835c16
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -0,0 +1,41 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/z2.h
+ *
+ *  Author: Ken McGuire
+ *  Created: Feb 6, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_ZIPIT2_H
+#define ASM_ARCH_ZIPIT2_H
+
+/* LEDs */
+#define	GPIO10_ZIPITZ2_LED_WIFI		10
+#define	GPIO85_ZIPITZ2_LED_CHARGED	85
+#define	GPIO83_ZIPITZ2_LED_CHARGING	83
+
+/* SD/MMC */
+#define	GPIO96_ZIPITZ2_SD_DETECT	96
+
+/* GPIO Buttons */
+#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
+#define	GPIO98_ZIPITZ2_LID_BUTTON	98
+
+/* Libertas GSPI8686 WiFi */
+#define	GPIO14_ZIPITZ2_WIFI_RESET	14
+#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO24_ZIPITZ2_WIFI_CS		24
+#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
+
+/* LCD */
+#define	GPIO19_ZIPITZ2_LCD_RESET	19
+#define	GPIO88_ZIPITZ2_LCD_CS		88
+
+/* MISC GPIOs */
+#define	GPIO0_ZIPITZ2_AC_DETECT		0
+#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index c387046..6e11997 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -58,6 +58,8 @@
 #define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
 #define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
 
+#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
+
 /*
  * CPLD registers:
  * Only 4 registers, but spreaded over a 32MB address space.
@@ -68,7 +70,6 @@
 #define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
 #define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
 #define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-#define ZEUS_CPLD_EXTWDOG	(ZEUS_CPLD + 0x3000)
 
 /* CPLD register bits */
 #define ZEUS_CPLD_CONTROL_CF_RST        0x01
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index fa527b2..9b90461 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -41,7 +41,6 @@
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
-#include <mach/ssp.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
@@ -272,7 +271,7 @@ static inline void littleton_init_keypad(void) {}
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
 	.gpio_card_ro		= -1,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1373c22..d279507 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -83,6 +83,10 @@ static unsigned long lpd270_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
@@ -121,7 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 98ee7e5..330c328 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -66,26 +66,14 @@ static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp DSTN */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_DSTN_16BPP,
 
 	/* BTUART */
 	GPIO42_BTUART_RXD,
@@ -158,7 +146,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
+		desc->chip->ack(irq);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
@@ -240,11 +228,18 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static struct platform_device sa1111_device = {
 	.name		= "sa1111",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
+	.dev		= {
+		.platform_data	= &sa1111_info,
+	},
 };
 
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
@@ -483,7 +478,7 @@ static void lubbock_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay		= 1,
+	.detect_delay_ms	= 10,
 	.init 			= lubbock_mci_init,
 	.get_ro			= lubbock_mci_get_ro,
 	.exit 			= lubbock_mci_exit,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 189f330..e81dd0c 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -88,26 +88,7 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO112_MMC_CMD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ee0f..5543c64 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -60,26 +60,7 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO15_nCS_1,
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 	GPIO16_PWM0_OUT,	/* Backlight */
 
 	/* MMC */
@@ -107,6 +88,10 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO57_nIOIS16,
 
 	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
@@ -162,7 +147,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
 	do {
-		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+		desc->chip->ack(irq);	/* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index cf6b720..1d1419b 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -81,6 +81,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		PGSR(bank) &= ~mask;
 		is_out = 1;
 		break;
+	case MFP_LPM_INPUT:
 	case MFP_LPM_DEFAULT:
 		break;
 	default:
@@ -178,8 +179,17 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
 	if (!d->valid)
 		return -EINVAL;
 
-	if (d->keypad_gpio)
-		return -EINVAL;
+	/* Allow keypad GPIOs to wakeup system when
+	 * configured as generic GPIOs.
+	 */
+	if (d->keypad_gpio && (MFP_AF(d->config) == 0) &&
+	    (d->config & MFP_LPM_CAN_WAKEUP)) {
+		if (on)
+			PKWR |= d->mask;
+		else
+			PKWR &= ~d->mask;
+		return 0;
+	}
 
 	mux_taken = (PWER & d->mux_mask) & (~d->mask);
 	if (on && mux_taken)
@@ -239,21 +249,25 @@ static int pxa27x_pkwr_gpio[] = {
 int keypad_set_wake(unsigned int on)
 {
 	unsigned int i, gpio, mask = 0;
-
-	if (!on) {
-		PKWR = 0;
-		return 0;
-	}
+	struct gpio_desc *d;
 
 	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
 
 		gpio = pxa27x_pkwr_gpio[i];
+		d = &gpio_desc[gpio];
 
-		if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP)
+		/* skip if configured as generic GPIO */
+		if (MFP_AF(d->config) == 0)
+			continue;
+
+		if (d->config & MFP_LPM_CAN_WAKEUP)
 			mask |= gpio_desc[gpio].mask;
 	}
 
-	PKWR = mask;
+	if (on)
+		PKWR |= mask;
+	else
+		PKWR &= ~mask;
 	return 0;
 }
 
@@ -328,6 +342,17 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
 	int i;
 
+	/* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		    (GPDR(i) & GPIO_bit(i))) {
+			if (GPLR(i) & GPIO_bit(i))
+				PGSR(i) |= GPIO_bit(i);
+			else
+				PGSR(i) &= ~GPIO_bit(i);
+		}
+	}
+
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 
 		saved_gafr[0][i] = GAFR_L(i);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2466a44..fa6a708 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -38,6 +38,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
+#include <linux/slab.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -86,25 +87,7 @@ static unsigned long mioa701_pin_config[] = {
 	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* QCI */
 	GPIO12_CIF_DD_7,
@@ -155,6 +138,10 @@ static unsigned long mioa701_pin_config[] = {
 	GPIO41_FFUART_RTS,
 
 	/* Sound */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 	GPIO89_AC97_SYSCLK,
 	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 
@@ -439,6 +426,7 @@ struct gpio_vbus_mach_info gpio_vbus_data = {
  * to give the card a chance to fully insert/eject.
  */
 static struct pxamci_platform_data mioa701_mci_info = {
+	.detect_delay_ms	= 250,
 	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO15_SDIO_INSERT,
 	.gpio_card_ro		= GPIO78_SDIO_RO,
@@ -709,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 };
 
 /* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
@@ -804,7 +792,6 @@ static void __init mioa701_machine_init(void)
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 0000000..462167a
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff   - Leave unconfigured for now...
+---------------------
+GPIO0   -   DREQ    (External DMA Request)
+GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4   -   nGCS3
+GPIO15  -   EXT_GPIO1
+GPIO16  -   EXT_GPIO2
+GPIO17  -   EXT_GPIO3
+GPIO24  -   EXT_GPIO4
+GPIO25  -   EXT_GPIO5
+GPIO26  -   EXT_GPIO6
+GPIO27  -   EXT_GPIO7
+GPIO28  -   EXT_GPIO8
+GPIO29  -   EXT_GPIO9
+GPIO30  -   EXT_GPIO10
+GPIO31  -   EXT_GPIO11
+GPIO57  -   EXT_GPIO12
+GPIO74  -   EXT_IRQ1
+GPIO75  -   EXT_IRQ2
+GPIO76  -   EXT_IRQ3
+GPIO77  -   EXT_IRQ4
+GPIO78  -   EXT_IRQ5
+GPIO79  -   EXT_IRQ6
+GPIO80  -   EXT_IRQ7
+GPIO81  -   EXT_IRQ8
+GPIO87  -   VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire   - Leave unconfigured for now...
+-------------
+GPIO0_2 -   DS - 1Wire
+
+Ethernet
+--------
+GPIO1   -   DM9000 PWR
+GPIO9   -   DM9K_nIRQ
+GPIO36  -   DM9K_RESET
+
+Keypad  - Leave unconfigured by for now...
+------
+GPIO1_2 -   KP_DKIN0
+GPIO5_2 -   KP_MKOUT7
+GPIO82  -   KP_DKIN1
+GPIO85  -   KP_DKIN2
+GPIO86  -   KP_DKIN3
+GPIO113 -   KP_MKIN0
+GPIO114 -   KP_MKIN1
+GPIO115 -   KP_MKIN2
+GPIO116 -   KP_MKIN3
+GPIO117 -   KP_MKIN4
+GPIO118 -   KP_MKIN5
+GPIO119 -   KP_MKIN6
+GPIO120 -   KP_MKIN7
+GPIO121 -   KP_MKOUT0
+GPIO122 -   KP_MKOUT1
+GPIO122 -   KP_MKOUT2
+GPIO123 -   KP_MKOUT3
+GPIO124 -   KP_MKOUT4
+GPIO125 -   KP_MKOUT5
+GPIO127 -   KP_MKOUT6
+
+Data Bus    - Leave unconfigured for now...
+--------
+GPIO2   -   nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 -   USBD_PULLUP
+GPIO10  -   UTM_CLK (USB Device UTM Clk)
+GPIO49  -   USB 2.0 Device UTM_DATA0
+GPIO50  -   USB 2.0 Device UTM_DATA1
+GPIO51  -   USB 2.0 Device UTM_DATA2
+GPIO52  -   USB 2.0 Device UTM_DATA3
+GPIO53  -   USB 2.0 Device UTM_DATA4
+GPIO54  -   USB 2.0 Device UTM_DATA5
+GPIO55  -   USB 2.0 Device UTM_DATA6
+GPIO56  -   USB 2.0 Device UTM_DATA7
+GPIO58  -   UTM_RXVALID (USB 2.0 Device)
+GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
+GPIO60  -   UTM_RXERROR
+GPIO61  -   UTM_OPMODE0
+GPIO62  -   UTM_OPMODE1
+GPIO71  -   USBD_INT    (USB Device?)
+GPIO73  -   UTM_TXREADY (USB 2.0 Device)
+GPIO83  -   UTM_TXVALID (USB 2.0 Device)
+GPIO98  -   UTM_RESET   (USB 2.0 device)
+GPIO99  -   UTM_XCVR_SELECT
+GPIO100 -   UTM_TERM_SELECT
+GPIO101 -   UTM_SUSPENDM_X
+GPIO102 -   UTM_LINESTATE0
+GPIO103 -   UTM_LINESTATE1
+
+Card-Bus Interface  - Leave unconfigured for now...
+------------------
+GPIO5   -   nPIOR (I/O space output enable)
+GPIO6   -   nPIOW (I/O space write enable)
+GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
+GPIO8   -   nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2     -   LDD0
+GPIO7_2     -   LDD1
+GPIO8_2     -   LDD2
+GPIO9_2     -   LDD3
+GPIO11_2    -   LDD5
+GPIO12_2    -   LDD6
+GPIO13_2    -   LDD7
+GPIO14_2    -   VSYNC
+GPIO15_2    -   HSYNC
+GPIO16_2    -   VCLK
+GPIO17_2    -   HCLK
+GPIO18_2    -   VDEN
+GPIO63      -   LDD8    (CPU LCD)
+GPIO64      -   LDD9    (CPU LCD)
+GPIO65      -   LDD10   (CPU LCD)
+GPIO66      -   LDD11   (CPU LCD)
+GPIO67      -   LDD12   (CPU LCD)
+GPIO68      -   LDD13   (CPU LCD)
+GPIO69      -   LDD14   (CPU LCD)
+GPIO70      -   LDD15   (CPU LCD)
+GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97      -   BACKLIGHT_EN
+GPIO104     -   LCD_PWREN
+
+PWM   - Leave unconfigured for now...
+---
+GPIO11  -   PWM0
+GPIO12  -   PWM1
+GPIO13  -   PWM2
+GPIO14  -   PWM3
+
+SD-CARD
+-------
+GPIO18  -   SDDATA0
+GPIO19  -   SDDATA1
+GPIO20  -   SDDATA2
+GPIO21  -   SDDATA3
+GPIO22  -   SDCLK
+GPIO23  -   SDCMD
+GPIO72  -   SD_WP
+GPIO84  -   SD_nIRQ_CD  (SD-Card)
+
+I2C
+---
+GPIO32  -   I2CSCL
+GPIO33  -   I2CSDA
+
+AC97
+----
+GPIO35  -   AC97_SDATA_IN
+GPIO37  -   AC97_SDATA_OUT
+GPIO38  -   AC97_SYNC
+GPIO39  -   AC97_BITCLK
+GPIO40  -   AC97_nRESET
+
+UART1
+-----
+GPIO41  -   UART_RXD1
+GPIO42  -   UART_TXD1
+GPIO43  -   UART_CTS1
+GPIO44  -   UART_DCD1
+GPIO45  -   UART_DSR1
+GPIO46  -   UART_nRI1
+GPIO47  -   UART_DTR1
+GPIO48  -   UART_RTS1
+
+UART2
+-----
+GPIO109 -   RTS2
+GPIO110 -   RXD2
+GPIO111 -   TXD2
+GPIO112 -   nCTS2
+
+UART3
+-----
+GPIO105 -   nCTS3
+GPIO106 -   nRTS3
+GPIO107 -   TXD3
+GPIO108 -   RXD3
+
+SSP3    - Leave unconfigured for now...
+----
+GPIO89  -   SSP3_CLK
+GPIO90  -   SSP3_SFRM
+GPIO91  -   SSP3_TXD
+GPIO92  -   SSP3_RXD
+
+SSP4
+GPIO93  -   SSP4_CLK
+GPIO94  -   SSP4_SFRM
+GPIO95  -   SSP4_TXD
+GPIO96  -   SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+	/* USB */
+	GPIO10_UTM_CLK,
+	GPIO49_U2D_PHYDATA_0,
+	GPIO50_U2D_PHYDATA_1,
+	GPIO51_U2D_PHYDATA_2,
+	GPIO52_U2D_PHYDATA_3,
+	GPIO53_U2D_PHYDATA_4,
+	GPIO54_U2D_PHYDATA_5,
+	GPIO55_U2D_PHYDATA_6,
+	GPIO56_U2D_PHYDATA_7,
+	GPIO58_UTM_RXVALID,
+	GPIO59_UTM_RXACTIVE,
+	GPIO60_U2D_RXERROR,
+	GPIO61_U2D_OPMODE0,
+	GPIO62_U2D_OPMODE1,
+	GPIO71_GPIO, /* USBD_INT */
+	GPIO73_UTM_TXREADY,
+	GPIO83_U2D_TXVALID,
+	GPIO98_U2D_RESET,
+	GPIO99_U2D_XCVR_SEL,
+	GPIO100_U2D_TERM_SEL,
+	GPIO101_U2D_SUSPEND,
+	GPIO102_UTM_LINESTATE_0,
+	GPIO103_UTM_LINESTATE_1,
+	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+	/* DM9000 */
+	GPIO1_GPIO,
+	GPIO9_GPIO,
+	GPIO36_GPIO,
+
+	/* AC97 */
+	GPIO35_AC97_SDATA_IN_0,
+	GPIO37_AC97_SDATA_OUT,
+	GPIO38_AC97_SYNC,
+	GPIO39_AC97_BITCLK,
+	GPIO40_AC97_nACRESET,
+
+	/* UARTS */
+	GPIO41_UART1_RXD,
+	GPIO42_UART1_TXD,
+	GPIO43_UART1_CTS,
+	GPIO44_UART1_DCD,
+	GPIO45_UART1_DSR,
+	GPIO46_UART1_RI,
+	GPIO47_UART1_DTR,
+	GPIO48_UART1_RTS,
+
+	GPIO109_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+	GPIO112_UART2_CTS,
+
+	GPIO105_UART3_CTS,
+	GPIO106_UART3_RTS,
+	GPIO107_UART3_TXD,
+	GPIO108_UART3_RXD,
+
+	GPIO78_GPIO,
+	GPIO79_GPIO,
+	GPIO80_GPIO,
+	GPIO81_GPIO,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* MMC */
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+	/* IRQ */
+	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay_ms = 10,
+	.gpio_card_detect = MXM_8X10_SD_nCD,
+	.gpio_card_ro = MXM_8X10_SD_WP,
+	.gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+	.port_mode = PMM_NPS_MODE,
+	.flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+	.name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+	platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x)           (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+	[0] = {
+	       .name = "boot",
+	       .size = NB(0x002),
+	       .offset = NB(0x000),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[1] = {
+	       .name = "kernel",
+	       .size = NB(0x010),
+	       .offset = NB(0x002),
+	       .mask_flags = MTD_WRITEABLE
+	},
+	[2] = {
+	       .name = "root",
+	       .size = NB(0x36c),
+	       .offset = NB(0x012)
+	},
+	[3] = {
+	       .name = "bbt",
+	       .size = NB(0x082),
+	       .offset = NB(0x37e),
+	       .mask_flags = MTD_WRITEABLE
+	}
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+	.enable_arbiter = 1,
+	.keep_config = 1,
+	.parts = mxm_8x10_nand_partitions,
+	.nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+	[0] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x300,
+	       .end = MXM_8X10_ETH_PHYS + 0x300,
+	       .flags = IORESOURCE_MEM
+	},
+	[1] = {
+	       .start = MXM_8X10_ETH_PHYS + 0x308,
+	       .end = MXM_8X10_ETH_PHYS + 0x308,
+	       .flags = IORESOURCE_MEM
+	},
+	[2] = {
+	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+	.flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+	.name = "dm9000",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dm9k_resources),
+	.resource = dm9k_resources,
+	.dev = {
+		.platform_data = &dm9k_plat_data
+	}
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+	platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68)
+	}
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+	i2c_register_board_info(0, mxm_8x10_i2c_devices,
+				ARRAY_SIZE(mxm_8x10_i2c_devices));
+	pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+	mxm_8x10_uarts_init();
+	mxm_8x10_nand_init();
+	mxm_8x10_i2c_init();
+	mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index e100af7..1963819 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -83,26 +83,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
@@ -187,7 +168,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 8fe3ec2..5305a39 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -87,26 +87,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PWM */
 	GPIO16_PWM0_OUT,
@@ -129,7 +110,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index b992f07..ce1104d 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -84,26 +84,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
 	GPIO36_GPIO,	/* pullup */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* MATRIX KEYPAD */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
@@ -140,7 +121,7 @@ static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
 	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
 	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
@@ -282,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = {
 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
 };
 
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
 	0, 9, 10, 11
 };
 
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
 };
 
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index dc728d6..3d284ff 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -73,26 +73,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
 	GPIO47_FICP_TXD,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* GPIO KEYS */
 	GPIO5_GPIO,	/* notes */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index b433bb4..d8b4469 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -99,25 +99,7 @@ static unsigned long treo_pin_config[] __initdata = {
 	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* Quick Capture Interface */
 	GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b37a025..ecc1a40 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -110,26 +110,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* FFUART */
 	GPIO34_FFUART_RXD,
@@ -189,7 +170,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1c5d68a..3a7925c 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -95,26 +95,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO105_KP_MKOUT_2,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
+
 	GPIO20_GPIO,	/* bl power */
 	GPIO21_GPIO,	/* LCD border switch */
 	GPIO22_GPIO,	/* LCD border color */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d5255ae..f56ae10 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -58,6 +58,12 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
 };
 
 /*
@@ -259,8 +265,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 
 	do {
-		GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
-					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+		desc->chip->ack(irq);	/* clear our parent IRQ */
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
 			generic_handle_irq(irq);
@@ -321,7 +326,7 @@ static void pcm990_mci_exit(struct device *dev, void *data)
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init 			= pcm990_mci_init,
 	.setpower 		= pcm990_mci_setpower,
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7693355..166c15f 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 
 #include <mach/pm.h>
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2b938a..f4abdaa 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -40,13 +40,12 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
 #include <mach/sharpsl.h>
-#include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
+#include <plat/i2c.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -91,26 +90,7 @@ static unsigned long poodle_pin_config[] __initdata = {
 	GPIO35_FFUART_CTS,
 
 	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
@@ -193,11 +173,18 @@ static struct resource locomo_resources[] = {
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device poodle_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
 	.resource	= locomo_resources,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
 };
 
 EXPORT_SYMBOL(poodle_locomo_device);
@@ -289,6 +276,7 @@ static void poodle_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
@@ -462,7 +450,6 @@ static void __init poodle_init(void)
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 2c1b0b7..0b9ad30 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -349,7 +349,7 @@ static int __init pxa25x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
+		clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
 
 		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
 			return ret;
@@ -370,7 +370,7 @@ static int __init pxa25x_init(void)
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
 	if (cpu_is_pxa255())
-		clks_register(&pxa25x_hwuart_clkreg, 1);
+		clkdev_add(&pxa25x_hwuart_clkreg);
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6a0b731..c059dac 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -40,6 +40,25 @@ void pxa27x_clear_otgph(void)
 }
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
+static unsigned long ac97_reset_config[] = {
+	GPIO113_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO95_AC97_nRESET,
+};
+
+void pxa27x_assert_ac97reset(int reset_gpio, int on)
+{
+	if (reset_gpio == 113)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
+				       &ac97_reset_config[1], 1);
+
+	if (reset_gpio == 95)
+		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
+				       &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
@@ -392,7 +411,7 @@ static int __init pxa27x_init(void)
 
 		reset_status = RCSR;
 
-		clks_register(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
+		clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
 
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index f4af6e2b..40bb165 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -102,12 +102,12 @@ static int __init pxa300_init(void)
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa300_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(common_clkregs));
+		clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
 	}
 
 	if (cpu_is_pxa310()) {
 		mfp_init_addr(pxa310_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa310_clkregs));
+		clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index c7373e7..8d614ec 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -90,7 +90,7 @@ static int __init pxa320_init(void)
 	if (cpu_is_pxa320()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa320_mfp_addr_map);
-		clks_register(ARRAY_AND_SIZE(pxa320_clkregs));
+		clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
 	}
 
 	return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index fcb0721..f544e58 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -29,7 +29,6 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/ssp.h>
 #include <mach/regs-intc.h>
 #include <plat/i2c.h>
 
@@ -634,7 +633,7 @@ static int __init pxa3xx_init(void)
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
 
-		clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
+		clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
 
 		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
 			return ret;
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 0000000..d4b61b3
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1105 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ * 	* Controller
+ *  	* Connector
+ *  	* Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* common GPIO	definitions */
+
+/* inputs */
+#define GPIO_ON_OFF		(14)
+#define GPIO_VOLENC_A		(19)
+#define GPIO_VOLENC_B		(20)
+#define GPIO_CHARGE_DONE	(23)
+#define GPIO_CHARGE_IND		(27)
+#define GPIO_TOUCH_IRQ		(32)
+#define GPIO_ETH_IRQ		(40)
+#define GPIO_SPI_MISO		(98)
+#define GPIO_ACCEL_IRQ		(104)
+#define GPIO_RESCUE_BOOT	(115)
+#define GPIO_DOCK_DETECT	(116)
+#define GPIO_KEY1		(117)
+#define GPIO_KEY2		(118)
+#define GPIO_KEY3		(119)
+#define GPIO_CHARGE_USB_OK	(112)
+#define GPIO_CHARGE_DC_OK	(101)
+#define GPIO_CHARGE_USB_SUSP	(102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY	(16)
+#define GPIO_SHUTDOWN_BATT	(18)
+#define GPIO_CHRG_PEN2		(31)
+#define GPIO_TFT_VA_EN		(33)
+#define GPIO_SPDIF_CS		(34)
+#define GPIO_LED2		(35)
+#define GPIO_LED1		(36)
+#define GPIO_SPDIF_RESET	(38)
+#define GPIO_SPI_CLK		(95)
+#define GPIO_MCLK_DAC_CS	(96)
+#define GPIO_SPI_MOSI		(97)
+#define GPIO_W1_PULLUP_ENABLE	(105)
+#define GPIO_DISPLAY_ENABLE	(106)
+#define GPIO_MCLK_RESET		(111)
+#define GPIO_W2W_RESET		(113)
+#define GPIO_W2W_PDN		(114)
+#define GPIO_CODEC_RESET	(120)
+#define GPIO_AUDIO_VA_ENABLE	(124)
+#define GPIO_ACCEL_CS		(125)
+#define GPIO_ONE_WIRE		(126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* One-wire */
+	GPIO126_GPIO | MFP_LPM_FLOAT,
+	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+	/* CHRG_USB_OK */
+	GPIO101_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_OK */
+	GPIO112_GPIO | MFP_PULL_HIGH,
+	/* CHRG_USB_SUSP */
+	GPIO102_GPIO,
+	/* DISPLAY_ENABLE */
+	GPIO106_GPIO,
+	/* DOCK_DETECT */
+	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO70_LCD_LDD_16,
+	GPIO71_LCD_LDD_17,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* SSP2 for S/PDIF */
+	GPIO25_SSP2_SCLK,
+	GPIO26_SSP2_FRM,
+	GPIO27_SSP2_TXD,
+	GPIO29_SSP2_EXTCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO77_UART1_RXD,
+	GPIO78_UART1_TXD,
+	GPIO79_UART1_CTS,
+	GPIO81_UART1_DSR,
+	GPIO83_UART1_DTR,
+	GPIO84_UART1_RTS,
+
+	/* UART3 */
+	GPIO110_UART3_RXD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* I2C */
+	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+	/* SPI */
+	GPIO34_GPIO,	/* SPDIF_CS */
+	GPIO96_GPIO,	/* MCLK_CS */
+	GPIO125_GPIO,	/* ACCEL_CS */
+
+	/* MMC */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,
+
+	/* Ethernet */
+	GPIO1_nCS2,			/* CS */
+	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
+
+	/* SSP for I2S */
+	GPIO85_SSP1_SCLK,
+	GPIO89_SSP1_EXTCLK,
+	GPIO86_SSP1_FRM,
+	GPIO87_SSP1_TXD,
+	GPIO88_SSP1_RXD,
+	GPIO90_SSP1_SYSCLK,
+
+	/* LEDs */
+	GPIO35_GPIO | MFP_LPM_PULL_LOW,
+	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+	{
+		.start	= PXA3xx_CS2_PHYS,
+		.end	= PXA3xx_CS2_PHYS + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= gpio_to_irq(GPIO_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+	}
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &raumfeld_smsc911x_config,
+	}
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0,
+		.size		= 0xa0000,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name		= "BootloaderEnvironment",
+		.offset		= 0xa0000,
+		.size		= 0x20000,
+	},
+	{
+		.name		= "BootloaderSplashScreen",
+		.offset		= 0xc0000,
+		.size		= 0x60000,
+	},
+	{
+		.name		= "UBI",
+		.offset		= 0x120000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= raumfeld_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+	.port_mode      = PMM_GLOBAL_MODE,
+	.flags		= ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
+	.steps		= 24,
+	.axis		= REL_X,
+	.relative_axis	= 1,
+	.gpio_a		= GPIO_VOLENC_A,
+	.gpio_b		= GPIO_VOLENC_B,
+	.inverted_a	= 1,
+	.inverted_b	= 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+	.name		= "rotary-encoder",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &raumfeld_rotary_encoder_info,
+	}
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+	{
+		.code			= KEY_F1,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY1,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 1",
+	},
+	{
+		.code			= KEY_F2,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY2,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 2",
+	},
+	{
+		.code			= KEY_F3,
+		.type			= EV_KEY,
+		.gpio			= GPIO_KEY3,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "Button 3",
+	},
+	{
+		.code			= KEY_F4,
+		.type			= EV_KEY,
+		.gpio			= GPIO_RESCUE_BOOT,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "rescue boot button",
+	},
+	{
+		.code			= KEY_F5,
+		.type			= EV_KEY,
+		.gpio			= GPIO_DOCK_DETECT,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "dock detect",
+	},
+	{
+		.code			= KEY_F6,
+		.type			= EV_KEY,
+		.gpio			= GPIO_ON_OFF,
+		.active_low		= 0,
+		.wakeup			= 0,
+		.debounce_interval	= 5, /* ms */
+		.desc			= "on_off button",
+	},
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
+	.rep		= 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev 	= {
+		.platform_data	= &gpio_keys_platform_data,
+	}
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+	{
+		.name		= "raumfeld:1",
+		.gpio		= GPIO_LED1,
+		.active_low	= 1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "raumfeld:2",
+		.gpio		= GPIO_LED2,
+		.active_low	= 0,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+	.leds		= raumfeld_leds,
+	.num_leds	= ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_led_platform_data,
+	},
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+	msleep(100);
+}
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+	.pin			= GPIO_ONE_WIRE,
+	.is_open_drain		= 0,
+	.enable_external_pullup	= w1_enable_external_pullup,
+};
+
+struct platform_device raumfeld_w1_gpio_device = {
+	.name	= "w1-gpio",
+	.dev	= {
+		.platform_data = &w1_gpio_platform_data
+	}
+};
+
+static void __init raumfeld_w1_init(void)
+{
+	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+				"W1 external pullup enable");
+
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+	platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	/* 10000 ns = 10 ms ^= 100 kHz */
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &raumfeld_pwm_backlight_data,
+	}
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+	.name		= "backlight",
+	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
+	.default_state	= LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+	.leds		= &raumfeld_lt3593_led,
+	.num_leds	= 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+	.name	= "leds-lt3593",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &raumfeld_lt3593_platform_data,
+	},
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+	.pixclock	= 111000,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 16,
+	.hsync_len	= 4,
+	.left_margin	= 2,
+	.right_margin	= 1,
+	.vsync_len	= 1,
+	.upper_margin	= 3,
+	.lower_margin	= 1,
+	.sync		= 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+	.modes		= &sharp_lq043t3dx02_mode,
+	.num_modes	= 1,
+	.video_mem_size = 0x400000,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+	int ret;
+
+	set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+
+	/* Earlier devices had the backlight regulator controlled
+	 * via PWM, later versions use another controller for that */
+	if ((system_rev & 0xff) < 2) {
+		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		platform_device_register(&raumfeld_pwm_backlight_device);
+	} else
+		platform_device_register(&raumfeld_lt3593_device);
+
+	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+	else
+		gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+	else
+		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+}
+
+/**
+ * SPI devices
+ */
+
+struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+	.sck		= GPIO_SPI_CLK,
+	.mosi		= GPIO_SPI_MOSI,
+	.miso		= GPIO_SPI_MISO,
+	.num_chipselect	= 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+	.name	= "spi_gpio",
+	.id	= 0,
+	.dev 	= {
+		.platform_data	= &raumfeld_spi_platform_data,
+	}
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+	.click_flags 	= LIS3_CLICK_SINGLE_X |
+			  LIS3_CLICK_SINGLE_Y |
+			  LIS3_CLICK_SINGLE_Z,
+	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+	.wakeup_thresh	= 10,
+	.click_thresh_x = 10,
+	.click_thresh_y = 10,
+	.click_thresh_z = 10,
+};
+
+#define SPI_AK4104	\
+{			\
+	.modalias	= "ak4104",	\
+	.max_speed_hz	= 10000,	\
+	.bus_num	= 0,		\
+	.chip_select	= 0,		\
+	.controller_data = (void *) GPIO_SPDIF_CS,	\
+}
+
+#define SPI_LIS3	\
+{			\
+	.modalias	= "lis3lv02d_spi",	\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 1,			\
+	.controller_data = (void *) GPIO_ACCEL_CS,	\
+	.platform_data	= &lis3_pdata,		\
+	.irq		= gpio_to_irq(GPIO_ACCEL_IRQ),	\
+}
+
+#define SPI_DAC7512	\
+{	\
+	.modalias	= "dac7512",		\
+	.max_speed_hz	= 1000000,		\
+	.bus_num	= 0,			\
+	.chip_select	= 2,			\
+	.controller_data = (void *) GPIO_MCLK_DAC_CS,	\
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+	SPI_AK4104,
+	SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+	SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+	SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 1);
+	gpio_set_value(GPIO_W2W_PDN, 1);
+
+	return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+	gpio_set_value(GPIO_W2W_RESET, 0);
+	gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+	.init			= raumfeld_mci_init,
+	.exit			= raumfeld_mci_exit,
+	.detect_delay_ms	= 200,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+	return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+	return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+	return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= raumfeld_is_ac_online,
+	.is_usb_online		= raumfeld_is_usb_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= raumfeld_power_supplicants,
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+};
+
+static struct resource power_supply_resources[] = {
+	{
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ |
+			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+		.start = GPIO_CHARGE_DC_OK,
+		.end   = GPIO_CHARGE_DC_OK,
+	},
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+	struct power_supply *psy;
+
+	psy = power_supply_get_by_name("ds2760-battery.0");
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+
+	return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+	int ret;
+
+	/* Set PEN2 high to enable maximum charge current */
+	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+	else
+		gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+
+	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+	else
+		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+			"charge_done", NULL);
+
+	if (ret < 0)
+		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+			GPIO_CHARGE_DONE);
+	else
+		platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+	REGULATOR_SUPPLY("va", "0-0048");
+
+struct regulator_init_data audio_va_initdata = {
+	.consumer_supplies = &audio_va_consumer_supply,
+	.num_consumer_supplies = 1,
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_va_config = {
+	.supply_name		= "audio_va",
+	.microvolts		= 5000000,
+	.gpio			= GPIO_AUDIO_VA_ENABLE,
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &audio_va_config,
+	},
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+	REGULATOR_SUPPLY("vd", "0-0048"),
+	REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+struct regulator_init_data audio_dummy_initdata = {
+	.consumer_supplies = audio_dummy_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+	.supply_name		= "audio_vd",
+	.microvolts		= 3300000,
+	.gpio			= -1,
+	.init_data		= &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &audio_dummy_config,
+	},
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+	&audio_va_device,
+	&audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
+					  REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_MODE,
+	},
+	.consumer_supplies = &vcc_mmc_supply,
+	.num_consumer_supplies = 1,
+};
+
+struct max8660_subdev_data max8660_v6_subdev_data = {
+	.id		= MAX8660_V6,
+	.name		= "vmmc",
+	.platform_data	= &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+	.subdevs = &max8660_v6_subdev_data,
+	.num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+	.type		= "max8660",
+	.addr		= 0x34,
+	.platform_data	= &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+	.type	= "cs4270",
+	.addr	= 0x48,
+};
+
+static struct eeti_ts_platform_data eeti_ts_pdata = {
+	.irq_active_high = 1,
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+	.type	= "eeti_ts",
+	.addr	= 0x0a,
+	.irq	= gpio_to_irq(GPIO_TOUCH_IRQ),
+	.platform_data = &eeti_ts_pdata,
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+	&raumfeld_gpio_keys_device,
+	&raumfeld_led_device,
+	&raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_CODEC_RESET\n");
+	else
+		gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_SPDIF_RESET\n");
+	else
+		gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+	if (ret < 0)
+		pr_warning("unable to request GPIO_MCLK_RESET\n");
+	else
+		gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+	int ret;
+
+	/* The on/off button polarity has changed after revision 1 */
+	if ((system_rev & 0xff) > 1) {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
+				gpio_keys_button[i].active_low = 1;
+	}
+
+	enable_irq_wake(IRQ_WAKEUP0);
+
+	pxa3xx_set_nand_info(&raumfeld_nand_info);
+	pxa3xx_set_i2c_power_info(NULL);
+	pxa_set_ohci_info(&raumfeld_ohci_info);
+	pxa_set_mci_info(&raumfeld_mci_platform_data);
+	pxa_set_i2c_info(NULL);
+	pxa_set_ffuart_info(NULL);
+
+	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_RESET\n");
+	else
+		gpio_direction_output(GPIO_W2W_RESET, 0);
+
+	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_W2W_PDN\n");
+	else
+		gpio_direction_output(GPIO_W2W_PDN, 0);
+
+	/* this can be used to switch off the device */
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init raumfeld_controller_init(void)
+{
+	int ret;
+
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+	platform_device_register(&rotary_encoder_device);
+	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+	if (ret < 0)
+		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+	else
+		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+	raumfeld_common_init();
+	raumfeld_power_init();
+	raumfeld_lcd_init();
+	raumfeld_w1_init();
+}
+
+static void __init raumfeld_connector_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+static void __init raumfeld_speaker_init(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+	platform_device_register(&smc91x_device);
+	platform_device_register(&rotary_encoder_device);
+
+	raumfeld_audio_init();
+	raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_controller_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_connector_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.init_machine	= raumfeld_speaker_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 1439785..0cc1203 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -10,29 +10,6 @@
 #include <mach/sharpsl_pm.h>
 
 /*
- * SharpSL SSP Driver
- */
-struct corgissp_machinfo {
-	int port;
-	int cs_lcdcon;
-	int cs_ads7846;
-	int cs_max1111;
-	int clk_lcdcon;
-	int clk_ads7846;
-	int clk_max1111;
-};
-
-void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
-
-
-/*
- * SharpSL/Corgi LCD Driver
- */
-void corgi_lcdtg_suspend(void);
-void corgi_lcdtg_hw_init(int mode);
-
-
-/*
  * SharpSL Battery/PM Driver
  */
 #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 67229a1..cb47672 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -28,7 +28,6 @@
 #include <asm/mach-types.h>
 #include <mach/pm.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
 #include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <mach/sharpsl_pm.h>
@@ -900,7 +899,7 @@ static struct platform_suspend_ops sharpsl_pm_ops = {
 };
 #endif
 
-static int __init sharpsl_pm_probe(struct platform_device *pdev)
+static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 28352c0..c1048a3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -56,25 +56,7 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* PC Card */
 	GPIO48_nPOE,
@@ -104,6 +86,7 @@ static unsigned long spitz_pin_config[] __initdata = {
 
 	/* GPIOs */
 	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
+	GPIO16_GPIO,	/* SPITZ_GPIO_SYNC */
 	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
 	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
 	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
@@ -137,7 +120,8 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* SPITZ_GPIO_KEY_INT */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
 /*
@@ -381,7 +365,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_PWR,
 		.code	= KEY_SUSPEND,
 		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On/Off",
+		.desc	= "On Off",
 		.wakeup	= 1,
 	},
 	/* Two buttons detecting the lid state */
@@ -555,6 +539,7 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.setpower 		= spitz_mci_setpower,
 	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
@@ -775,7 +760,6 @@ static void __init common_init(void)
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
@@ -834,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index fc5a70c..4209ddf 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -24,9 +24,10 @@
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x.h>
+
 #include "sharpsl.h"
+#include "generic.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
@@ -37,10 +38,17 @@
 
 static int spitz_last_ac_status;
 
+static struct gpio spitz_charger_gpios[] = {
+	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
+	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
+	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
+	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
+};
+
 static void spitz_charger_init(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
+	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
 }
 
 static void spitz_measure_temp(int on)
@@ -76,6 +84,11 @@ static void spitz_discharge1(int on)
 	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
+static unsigned long gpio18_config[] = {
+	GPIO18_RDY,
+	GPIO18_GPIO,
+};
+
 static void spitz_presuspend(void)
 {
 	spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
@@ -97,7 +110,9 @@ static void spitz_presuspend(void)
 	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
 	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
+	pxa2xx_mfp_config(&gpio18_config[0], 1);
+	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
+	gpio_free(18);
 
 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
 	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
@@ -114,8 +129,7 @@ static void spitz_presuspend(void)
 
 static void spitz_postsuspend(void)
 {
-	pxa_gpio_mode(GPIO18_RDY_MD);
-	pxa_gpio_mode(10 | GPIO_IN);
+	pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
deleted file mode 100644
index 9ebe658..0000000
--- a/arch/arm/mach-pxa/ssp.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/ssp.c
- *
- *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
- *
- *  Copyright (C) 2003 Russell King.
- *  Copyright (C) 2003 Wolfson Microelectronics PLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  PXA2xx SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications and allows easy port setup for DMA access.
- *
- *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/ssp.h>
-#include <mach/regs-ssp.h>
-
-#define TIMEOUT 100000
-
-static irqreturn_t ssp_interrupt(int irq, void *dev_id)
-{
-	struct ssp_dev *dev = dev_id;
-	struct ssp_device *ssp = dev->ssp;
-	unsigned int status;
-
-	status = __raw_readl(ssp->mmio_base + SSSR);
-	__raw_writel(status, ssp->mmio_base + SSSR);
-
-	if (status & SSSR_ROR)
-		printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port);
-
-	if (status & SSSR_TUR)
-		printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port);
-
-	if (status & SSSR_BCE)
-		printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * ssp_write_word - write a word to the SSP port
- * @data: 32-bit, MSB justified data to write.
- *
- * Wait for a free entry in the SSP transmit FIFO, and write a data
- * word to the SSP port.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   0			success
- */
-int ssp_write_word(struct ssp_dev *dev, u32 data)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT;
-
-	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	__raw_writel(data, ssp->mmio_base + SSDR);
-
-	return 0;
-}
-
-/**
- * ssp_read_word - read a word from the SSP port
- *
- * Wait for a data word in the SSP receive FIFO, and return the
- * received data.  Data is LSB justified.
- *
- * Note: Currently, if data is not expected to be received, this
- * function will wait for ever.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   32-bit data	success
- */
-int ssp_read_word(struct ssp_dev *dev, u32 *data)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT;
-
-	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	*data = __raw_readl(ssp->mmio_base + SSDR);
-	return 0;
-}
-
-/**
- * ssp_flush - flush the transmit and receive FIFOs
- *
- * Wait for the SSP to idle, and ensure that the receive FIFO
- * is empty.
- *
- * The caller is expected to perform the necessary locking.
- */
-int ssp_flush(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT * 2;
-
-	/* ensure TX FIFO is empty instead of not full */
-	if (cpu_is_pxa3xx()) {
-		while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) {
-			if (!--timeout)
-				return -ETIMEDOUT;
-			cpu_relax();
-		}
-		timeout = TIMEOUT * 2;
-	}
-
-	do {
-		while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) {
-		        if (!--timeout)
-		        	return -ETIMEDOUT;
-			(void)__raw_readl(ssp->mmio_base + SSDR);
-		}
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-	} while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY);
-
-	return 0;
-}
-
-/**
- * ssp_enable - enable the SSP port
- *
- * Turn on the SSP port.
- */
-void ssp_enable(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sscr0;
-
-	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	sscr0 |= SSCR0_SSE;
-	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_disable - shut down the SSP port
- *
- * Turn off the SSP port, optionally powering it down.
- */
-void ssp_disable(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sscr0;
-
-	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	sscr0 &= ~SSCR0_SSE;
-	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_save_state - save the SSP configuration
- * @ssp: pointer to structure to save SSP configuration
- *
- * Save the configured SSP state for suspend.
- */
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	state->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	state->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
-	state->to  = __raw_readl(ssp->mmio_base + SSTO);
-	state->psp = __raw_readl(ssp->mmio_base + SSPSP);
-
-	ssp_disable(dev);
-}
-
-/**
- * ssp_restore_state - restore a previously saved SSP configuration
- * @ssp: pointer to configuration saved by ssp_save_state
- *
- * Restore the SSP configuration saved previously by ssp_save_state.
- */
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
-
-	__raw_writel(sssr, ssp->mmio_base + SSSR);
-
-	__raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
-	__raw_writel(state->cr1, ssp->mmio_base + SSCR1);
-	__raw_writel(state->to,  ssp->mmio_base + SSTO);
-	__raw_writel(state->psp, ssp->mmio_base + SSPSP);
-	__raw_writel(state->cr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_config - configure SSP port settings
- * @mode: port operating mode
- * @flags: port config flags
- * @psp_flags: port PSP config flags
- * @speed: port speed
- *
- * Port MUST be disabled by ssp_disable before making any config changes.
- */
-int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	dev->mode = mode;
-	dev->flags = flags;
-	dev->psp_flags = psp_flags;
-	dev->speed = speed;
-
-	/* set up port type, speed, port settings */
-	__raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0);
-	__raw_writel(dev->flags, ssp->mmio_base + SSCR1);
-	__raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP);
-
-	return 0;
-}
-
-/**
- * ssp_init - setup the SSP port
- *
- * initialise and claim resources for the SSP port.
- *
- * Returns:
- *   %-ENODEV	if the SSP port is unavailable
- *   %-EBUSY	if the resources are already in use
- *   %0		on success
- */
-int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
-{
-	struct ssp_device *ssp;
-	int ret;
-
-	ssp = ssp_request(port, "SSP");
-	if (ssp == NULL)
-		return -ENODEV;
-
-	dev->ssp = ssp;
-	dev->port = port;
-
-	/* do we need to get irq */
-	if (!(init_flags & SSP_NO_IRQ)) {
-		ret = request_irq(ssp->irq, ssp_interrupt,
-				0, "SSP", dev);
-	    	if (ret)
-			goto out_region;
-		dev->irq = ssp->irq;
-	} else
-		dev->irq = NO_IRQ;
-
-	/* turn on SSP port clock */
-	clk_enable(ssp->clk);
-	return 0;
-
-out_region:
-	ssp_free(ssp);
-	return ret;
-}
-
-/**
- * ssp_exit - undo the effects of ssp_init
- *
- * release and free resources for the SSP port.
- */
-void ssp_exit(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	ssp_disable(dev);
-	if (dev->irq != NO_IRQ)
-		free_irq(dev->irq, dev);
-	clk_disable(ssp->clk);
-	ssp_free(ssp);
-}
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(ssp_request);
-
-void ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(&ssp->pdev->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL(ssp_free);
-
-static int __devinit ssp_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct resource *res;
-	struct ssp_device *ssp;
-	int ret = 0;
-
-	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory");
-		return -ENOMEM;
-	}
-	ssp->pdev = pdev;
-
-	ssp->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ssp->clk)) {
-		ret = PTR_ERR(ssp->clk);
-		goto err_free;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	res = request_mem_region(res->start, res->end - res->start + 1,
-			pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	ssp->phys_base = res->start;
-
-	ssp->mmio_base = ioremap(res->start, res->end - res->start + 1);
-	if (ssp->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-	ssp->drcmr_rx = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-	ssp->drcmr_tx = res->start;
-
-	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-	 * starts from 0, do a translation here
-	 */
-	ssp->port_id = pdev->id + 1;
-	ssp->use_count = 0;
-	ssp->type = (int)id->driver_data;
-
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
-
-	platform_set_drvdata(pdev, ssp);
-	return 0;
-
-err_free_io:
-	iounmap(ssp->mmio_base);
-err_free_mem:
-	release_mem_region(res->start, res->end - res->start + 1);
-err_free_clk:
-	clk_put(ssp->clk);
-err_free:
-	kfree(ssp);
-	return ret;
-}
-
-static int __devexit ssp_remove(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct ssp_device *ssp;
-
-	ssp = platform_get_drvdata(pdev);
-	if (ssp == NULL)
-		return -ENODEV;
-
-	iounmap(ssp->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
-
-	clk_put(ssp->clk);
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-
-	kfree(ssp);
-	return 0;
-}
-
-static const struct platform_device_id ssp_id_table[] = {
-	{ "pxa25x-ssp",		PXA25x_SSP },
-	{ "pxa25x-nssp",	PXA25x_NSSP },
-	{ "pxa27x-ssp",		PXA27x_SSP },
-	{ },
-};
-
-static struct platform_driver ssp_driver = {
-	.probe		= ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "pxa2xx-ssp",
-	},
-	.id_table	= ssp_id_table,
-};
-
-static int __init pxa_ssp_init(void)
-{
-	return platform_driver_register(&ssp_driver);
-}
-
-static void __exit pxa_ssp_exit(void)
-{
-	platform_driver_unregister(&ssp_driver);
-}
-
-arch_initcall(pxa_ssp_init);
-module_exit(pxa_ssp_exit);
-
-EXPORT_SYMBOL(ssp_write_word);
-EXPORT_SYMBOL(ssp_read_word);
-EXPORT_SYMBOL(ssp_flush);
-EXPORT_SYMBOL(ssp_enable);
-EXPORT_SYMBOL(ssp_disable);
-EXPORT_SYMBOL(ssp_save_state);
-EXPORT_SYMBOL(ssp_restore_state);
-EXPORT_SYMBOL(ssp_init);
-EXPORT_SYMBOL(ssp_exit);
-EXPORT_SYMBOL(ssp_config);
-
-MODULE_DESCRIPTION("PXA SSP driver");
-MODULE_AUTHOR("Liam Girdwood");
-MODULE_LICENSE("GPL");
-
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a98a434..af40d2a 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -464,8 +464,6 @@ static struct platform_device smc91x_device = {
 
 
 
-static struct pxamci_platform_data stargate2_mci_platform_data;
-
 /*
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert / eject.
@@ -489,8 +487,6 @@ static int stargate2_mci_init(struct device *dev,
 		goto free_power_en;
 	}
 	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-	/* Delay to allow for full insertion */
-	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
 			  stargate2_detect_int,
@@ -529,6 +525,7 @@ static void stargate2_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.detect_delay_ms = 250,
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init = stargate2_mci_init,
 	.setpower = stargate2_mci_setpower,
@@ -764,11 +761,6 @@ static void __init stargate2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	/* spi chip selects */
-	gpio_direction_output(37, 0);
-	gpio_direction_output(24, 0);
-	gpio_direction_output(39, 0);
-
 	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
 
 	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 750c448..293e40a 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -76,14 +76,12 @@ pxa_ost0_interrupt(int irq, void *dev_id)
 static int
 pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -91,23 +89,17 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 static void
 pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-	unsigned long irqflags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* initializing, released, or preparing for suspend */
-		raw_local_irq_save(irqflags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(irqflags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c854c16..7512b82 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/spi/spi.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -131,24 +132,24 @@ static unsigned long tosa_pin_config[] = {
 	GPIO45_BTUART_RTS,
 
 	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
@@ -274,6 +275,7 @@ static void tosa_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init           	= tosa_mci_init,
 	.exit           	= tosa_mci_exit,
@@ -411,9 +413,87 @@ static struct platform_device tosa_power_device = {
 /*
  * Tosa Keyboard
  */
+static const uint32_t tosakbd_keymap[] = {
+	KEY(0, 2, KEY_W),
+	KEY(0, 6, KEY_K),
+	KEY(0, 7, KEY_BACKSPACE),
+	KEY(0, 8, KEY_P),
+	KEY(1, 1, KEY_Q),
+	KEY(1, 2, KEY_E),
+	KEY(1, 3, KEY_T),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 6, KEY_O),
+	KEY(1, 7, KEY_I),
+	KEY(1, 8, KEY_COMMA),
+	KEY(2, 1, KEY_A),
+	KEY(2, 2, KEY_D),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_U),
+	KEY(2, 6, KEY_L),
+	KEY(2, 7, KEY_ENTER),
+	KEY(2, 8, KEY_DOT),
+	KEY(3, 1, KEY_Z),
+	KEY(3, 2, KEY_C),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_J),
+	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 6, TOSA_KEY_CANCEL),
+	KEY(3, 7, TOSA_KEY_CENTER),
+	KEY(3, 8, TOSA_KEY_OK),
+	KEY(3, 9, KEY_LEFTSHIFT),
+	KEY(4, 1, KEY_S),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_B),
+	KEY(4, 4, KEY_N),
+	KEY(4, 5, TOSA_KEY_CALENDAR),
+	KEY(4, 6, TOSA_KEY_HOMEPAGE),
+	KEY(4, 7, KEY_LEFTCTRL),
+	KEY(4, 8, TOSA_KEY_LIGHT),
+	KEY(4, 10, KEY_RIGHTSHIFT),
+	KEY(5, 1, KEY_TAB),
+	KEY(5, 2, KEY_SLASH),
+	KEY(5, 3, KEY_H),
+	KEY(5, 4, KEY_M),
+	KEY(5, 5, TOSA_KEY_MENU),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, TOSA_KEY_FN),
+	KEY(6, 1, KEY_X),
+	KEY(6, 2, KEY_F),
+	KEY(6, 3, KEY_SPACE),
+	KEY(6, 4, KEY_APOSTROPHE),
+	KEY(6, 5, TOSA_KEY_MAIL),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+	.keymap		= tosakbd_keymap,
+	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+			{ 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+	.keymap_data		= &tosakbd_keymap_data,
+	.row_gpios		= tosakbd_row_gpios,
+	.col_gpios		= tosakbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device tosakbd_device = {
-	.name		= "tosa-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &tosakbd_pdata,
+	},
 };
 
 static struct gpio_keys_button tosa_gpio_keys[] = {
@@ -847,7 +927,6 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0aa858e..6968911 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -72,27 +72,14 @@ static unsigned long trizeps4_pin_config[] __initdata = {
 	GPIO79_nCS_3,		/* Logic CS */
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
+	GPIOxx_LCD_TFT_16BPP,
 
 	/* UART */
 	GPIO9_FFUART_CTS,
@@ -362,7 +349,7 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
+	.detect_delay_ms= 10,
 	.init 		= trizeps4_mci_init,
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 89f258c..e90114a 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -27,12 +27,14 @@
 #include <linux/delay.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/major.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/gpio.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
@@ -281,7 +283,7 @@ static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
 	do {
 		/* we're in a chained irq handler,
 		 * so ack the interrupt by hand */
-		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+		desc->chip->ack(irq);
 
 		if (likely(pending)) {
 			irq = viper_bit_to_irq(__ffs(pending));
@@ -453,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
 	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
 	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
 	.udelay  = 10,
-	.timeout = 100,
+	.timeout = HZ,
 };
 
 static struct platform_device i2c_bus_device = {
@@ -711,6 +713,12 @@ static mfp_cfg_t viper_pin_config[] __initdata = {
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	/* FP Backlight */
 	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
 	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
@@ -772,7 +780,7 @@ static void __init viper_tpm_init(void)
 		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
 		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
 		.udelay  = 10,
-		.timeout = 100,
+		.timeout = HZ,
 	};
 	char *errstr;
 
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
new file mode 100644
index 0000000..9884fa9
--- /dev/null
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -0,0 +1,615 @@
+/*
+ * Hardware definitions for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/sysdev.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/dm9000.h>
+#include <linux/ucb1400.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/vpac270.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long vpac270_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO53_GPIO,	/* SD detect */
+	GPIO52_GPIO,	/* SD r/o switch */
+
+	/* GPIO KEYS */
+	GPIO1_GPIO,	/* USER BTN */
+
+	/* LEDs */
+	GPIO15_GPIO,	/* orange led */
+
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+	GPIO27_FFUART_RTS,
+	GPIO100_FFUART_CTS,
+	GPIO33_FFUART_DSR,
+	GPIO40_FFUART_DTR,
+	GPIO10_FFUART_DCD,
+	GPIO38_FFUART_RI,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO86_LCD_LDD_16,
+	GPIO87_LCD_LDD_17,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO84_GPIO,	/* PCMCIA CD */
+	GPIO35_GPIO,	/* PCMCIA RDY */
+	GPIO107_GPIO,	/* PCMCIA PPEN */
+	GPIO11_GPIO,	/* PCMCIA RESET */
+	GPIO17_GPIO,	/* CF CD */
+	GPIO12_GPIO,	/* CF RDY */
+	GPIO16_GPIO,	/* CF RESET */
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	/* UDC */
+	GPIO41_GPIO,
+
+	/* Ethernet */
+	GPIO114_GPIO,	/* IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* TS IRQ */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* IDE */
+	GPIO36_GPIO,	/* IDE IRQ */
+	GPIO80_DREQ_1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition vpac270_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data vpac270_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= vpac270_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
+	}
+};
+
+static struct resource vpac270_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device vpac270_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &vpac270_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = vpac270_flash_data,
+	},
+};
+static void __init vpac270_nor_init(void)
+{
+	platform_device_register(&vpac270_flash);
+}
+#else
+static inline void vpac270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * OneNAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition vpac270_onenand_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct onenand_platform_data vpac270_onenand_info = {
+	.parts		= vpac270_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
+};
+
+static struct resource vpac270_onenand_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device vpac270_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= vpac270_onenand_resources,
+	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
+	.dev		= {
+		.platform_data	= &vpac270_onenand_info,
+	},
+};
+
+static void __init vpac270_onenand_init(void)
+{
+	platform_device_register(&vpac270_onenand);
+}
+#else
+static void __init vpac270_onenand_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data vpac270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
+	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
+	.detect_delay_ms	= 200,
+};
+
+static void __init vpac270_mmc_init(void)
+{
+	pxa_set_mci_info(&vpac270_mci_platform_data);
+}
+#else
+static inline void vpac270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button vpac270_pxa_buttons[] = {
+	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
+};
+
+static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
+	.buttons	= vpac270_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
+};
+
+static struct platform_device vpac270_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &vpac270_pxa_keys_data,
+	},
+};
+
+static void __init vpac270_keys_init(void)
+{
+	platform_device_register(&vpac270_pxa_keys);
+}
+#else
+static inline void vpac270_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led vpac270_gpio_leds[] = {
+{
+	.name			= "vpac270:orange:user",
+	.default_trigger	= "none",
+	.gpio			= GPIO15_VPAC270_LED_ORANGE,
+	.active_low		= 1,
+}
+};
+
+static struct gpio_led_platform_data vpac270_gpio_led_info = {
+	.leds		= vpac270_gpio_leds,
+	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
+};
+
+static struct platform_device vpac270_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &vpac270_gpio_led_info,
+	}
+};
+
+static void __init vpac270_leds_init(void)
+{
+	platform_device_register(&vpac270_leds);
+}
+#else
+static inline void vpac270_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int vpac270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data vpac270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= vpac270_ohci_init,
+};
+
+static void __init vpac270_uhc_init(void)
+{
+	pxa_set_ohci_info(&vpac270_ohci_info);
+}
+#else
+static inline void vpac270_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
+	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device vpac270_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &vpac270_gpio_vbus_info,
+	},
+};
+
+static void vpac270_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
+	.udc_command		= vpac270_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init vpac270_udc_init(void)
+{
+	pxa_set_udc_info(&vpac270_udc_info);
+	platform_device_register(&vpac270_gpio_vbus);
+}
+#else
+static inline void vpac270_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource vpac270_dm9000_resources[] = {
+	[0] = {
+		.start	= PXA_CS2_PHYS + 0x300,
+		.end	= PXA_CS2_PHYS + 0x303,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS2_PHYS + 0x304,
+		.end	= PXA_CS2_PHYS + 0x343,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+		.end	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct dm9000_plat_data vpac270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device vpac270_dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
+	.resource	= vpac270_dm9000_resources,
+	.dev		= {
+		.platform_data = &vpac270_dm9000_platdata,
+	}
+};
+
+static void __init vpac270_eth_init(void)
+{
+	platform_device_register(&vpac270_dm9000_device);
+}
+#else
+static inline void vpac270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+};
+
+static struct platform_device vpac270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init vpac270_ts_init(void)
+{
+	pxa_set_ac97_info(&vpac270_ac97_pdata);
+	platform_device_register(&vpac270_ucb1400_device);
+}
+#else
+static inline void vpac270_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1339", 0x68),
+	},
+};
+
+static void __init vpac270_rtc_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
+}
+#else
+static inline void vpac270_rtc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info vpac270_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 144,
+	.right_margin	= 32,
+	.upper_margin	= 13,
+	.lower_margin	= 30,
+
+	.hsync_len	= 32,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info vpac270_lcd_screen = {
+	.modes		= vpac270_lcd_modes,
+	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
+}
+
+static void __init vpac270_lcd_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
+	set_pxa_fb_info(&vpac270_lcd_screen);
+	return;
+
+err2:
+	gpio_free(GPIO81_VPAC270_BKL_ON);
+err:
+	return;
+}
+#else
+static inline void vpac270_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * PATA IDE
+ ******************************************************************************/
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+static struct pata_platform_info vpac270_pata_pdata = {
+	.ioport_shift	= 1,
+	.irq_flags	= IRQF_TRIGGER_RISING,
+};
+
+static struct resource vpac270_ide_resources[] = {
+	[0] = {	/* I/O Base address */
+	       .start	= PXA_CS3_PHYS + 0x120,
+	       .end	= PXA_CS3_PHYS + 0x13f,
+	       .flags	= IORESOURCE_MEM
+	},
+	[1] = {	/* CTL Base address */
+	       .start	= PXA_CS3_PHYS + 0x15c,
+	       .end	= PXA_CS3_PHYS + 0x15f,
+	       .flags	= IORESOURCE_MEM
+	},
+	[2] = {	/* IDE IRQ pin */
+	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .flags	= IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device vpac270_ide_device = {
+	.name		= "pata_platform",
+	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
+	.resource	= vpac270_ide_resources,
+	.dev		= {
+		.platform_data	= &vpac270_pata_pdata,
+	}
+};
+
+static void __init vpac270_ide_init(void)
+{
+	platform_device_register(&vpac270_ide_device);
+}
+#else
+static inline void vpac270_ide_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init vpac270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	vpac270_lcd_init();
+	vpac270_mmc_init();
+	vpac270_nor_init();
+	vpac270_onenand_init();
+	vpac270_leds_init();
+	vpac270_keys_init();
+	vpac270_uhc_init();
+	vpac270_udc_init();
+	vpac270_eth_init();
+	vpac270_ts_init();
+	vpac270_rtc_init();
+	vpac270_ide_init();
+}
+
+MACHINE_START(VPAC270, "Voipac PXA270")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= vpac270_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
new file mode 100644
index 0000000..d303c69
--- /dev/null
+++ b/arch/arm/mach-pxa/z2.c
@@ -0,0 +1,603 @@
+/*
+ *  linux/arch/arm/mach-pxa/z2.c
+ *
+ *  Support for the Zipit Z2 Handheld device.
+ *
+ *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on research and code by: Ken McGuire
+ *  Based on mainstone.c as modified for the Zipit Z2.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+#include <linux/spi/lms283gf05.h>
+#include <linux/power_supply.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/z2.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long z2_pin_config[] = {
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO19_GPIO,		/* LCD reset */
+	GPIO88_GPIO,		/* LCD chipselect */
+
+	/* PWM */
+	GPIO115_PWM1_OUT,	/* Keypad Backlight */
+	GPIO11_PWM2_OUT,	/* LCD Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO96_GPIO,		/* SD detect */
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO38_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO16_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO17_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO35_KP_MKOUT_6,
+	GPIO41_KP_MKOUT_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
+	GPIO25_SSP1_TXD,	/* SSP1_TXD */
+	GPIO26_SSP1_RXD,	/* SSP1_RXD */
+
+	/* SSP2 */
+	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
+	GPIO13_SSP2_TXD,	/* SSP2_TXD */
+	GPIO40_SSP2_RXD,	/* SSP2_RXD */
+
+	/* LEDs */
+	GPIO10_GPIO,		/* WiFi LED */
+	GPIO83_GPIO,		/* Charging LED */
+	GPIO85_GPIO,		/* Charged LED */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* MISC */
+	GPIO0_GPIO,		/* AC power detect */
+	GPIO1_GPIO,		/* Power button */
+	GPIO37_GPIO,		/* Headphone detect */
+	GPIO98_GPIO,		/* Lid switch */
+	GPIO14_GPIO,		/* WiFi Reset */
+	GPIO15_GPIO,		/* WiFi Power */
+	GPIO24_GPIO,		/* WiFi CS */
+	GPIO36_GPIO,		/* WiFi IRQ */
+	GPIO88_GPIO,		/* LCD CS */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct resource z2_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition z2_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	}, {
+		.name	= "U-Boot Environment",
+		.offset	= 0x40000,
+		.size	= 0x60000,
+	}, {
+		.name	= "Flash",
+		.offset	= 0x60000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data z2_flash_data = {
+	.width		= 2,
+	.parts		= z2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
+};
+
+static struct platform_device z2_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &z2_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &z2_flash_data,
+	},
+};
+
+static void __init z2_nor_init(void)
+{
+	platform_device_register(&z2_flash);
+}
+#else
+static inline void z2_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data z2_backlight_data[] = {
+	[0] = {
+		/* Keypad Backlight */
+		.pwm_id		= 1,
+		.max_brightness	= 1023,
+		.dft_brightness	= 512,
+		.pwm_period_ns	= 1260320,
+	},
+	[1] = {
+		/* LCD Backlight */
+		.pwm_id		= 2,
+		.max_brightness	= 1023,
+		.dft_brightness	= 512,
+		.pwm_period_ns	= 1260320,
+	},
+};
+
+static struct platform_device z2_backlight_devices[2] = {
+	{
+		.name	= "pwm-backlight",
+		.id	= 0,
+		.dev	= {
+			.platform_data	= &z2_backlight_data[1],
+		},
+	},
+	{
+		.name	= "pwm-backlight",
+		.id	= 1,
+		.dev	= {
+			.platform_data	= &z2_backlight_data[0],
+		},
+	},
+};
+static void __init z2_pwm_init(void)
+{
+	platform_device_register(&z2_backlight_devices[0]);
+	platform_device_register(&z2_backlight_devices[1]);
+}
+#else
+static inline void z2_pwm_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info z2_lcd_modes[] = {
+{
+	.pixclock	= 192000,
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 4,
+	.right_margin	= 8,
+	.upper_margin	= 4,
+	.lower_margin	= 8,
+
+	.hsync_len	= 4,
+	.vsync_len	= 4,
+},
+};
+
+static struct pxafb_mach_info z2_lcd_screen = {
+	.modes		= z2_lcd_modes,
+	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
+			  LCD_ALTERNATE_MAPPING,
+};
+
+static void __init z2_lcd_init(void)
+{
+	set_pxa_fb_info(&z2_lcd_screen);
+}
+#else
+static inline void z2_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data z2_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO96_ZIPITZ2_SD_DETECT,
+	.gpio_power		= -1,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init z2_mmc_init(void)
+{
+	pxa_set_mci_info(&z2_mci_platform_data);
+}
+#else
+static inline void z2_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led z2_gpio_leds[] = {
+{
+	.name			= "z2:green:wifi",
+	.default_trigger	= "none",
+	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
+	.active_low		= 1,
+}, {
+	.name			= "z2:green:charged",
+	.default_trigger	= "none",
+	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
+	.active_low		= 1,
+}, {
+	.name			= "z2:amber:charging",
+	.default_trigger	= "none",
+	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
+	.active_low		= 1,
+},
+};
+
+static struct gpio_led_platform_data z2_gpio_led_info = {
+	.leds		= z2_gpio_leds,
+	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
+};
+
+static struct platform_device z2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &z2_gpio_led_info,
+	}
+};
+
+static void __init z2_leds_init(void)
+{
+	platform_device_register(&z2_leds);
+}
+#else
+static inline void z2_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int z2_matrix_keys[] = {
+	KEY(0, 0, KEY_OPTION),
+	KEY(1, 0, KEY_UP),
+	KEY(2, 0, KEY_DOWN),
+	KEY(3, 0, KEY_LEFT),
+	KEY(4, 0, KEY_RIGHT),
+	KEY(5, 0, KEY_END),
+	KEY(6, 0, KEY_KPPLUS),
+
+	KEY(0, 1, KEY_HOME),
+	KEY(1, 1, KEY_Q),
+	KEY(2, 1, KEY_I),
+	KEY(3, 1, KEY_G),
+	KEY(4, 1, KEY_X),
+	KEY(5, 1, KEY_ENTER),
+	KEY(6, 1, KEY_KPMINUS),
+
+	KEY(0, 2, KEY_PAGEUP),
+	KEY(1, 2, KEY_W),
+	KEY(2, 2, KEY_O),
+	KEY(3, 2, KEY_H),
+	KEY(4, 2, KEY_C),
+	KEY(5, 2, KEY_LEFTALT),
+
+	KEY(0, 3, KEY_PAGEDOWN),
+	KEY(1, 3, KEY_E),
+	KEY(2, 3, KEY_P),
+	KEY(3, 3, KEY_J),
+	KEY(4, 3, KEY_V),
+	KEY(5, 3, KEY_LEFTSHIFT),
+
+	KEY(0, 4, KEY_ESC),
+	KEY(1, 4, KEY_R),
+	KEY(2, 4, KEY_A),
+	KEY(3, 4, KEY_K),
+	KEY(4, 4, KEY_B),
+	KEY(5, 4, KEY_LEFTCTRL),
+
+	KEY(0, 5, KEY_TAB),
+	KEY(1, 5, KEY_T),
+	KEY(2, 5, KEY_S),
+	KEY(3, 5, KEY_L),
+	KEY(4, 5, KEY_N),
+	KEY(5, 5, KEY_SPACE),
+
+	KEY(0, 6, KEY_STOPCD),
+	KEY(1, 6, KEY_Y),
+	KEY(2, 6, KEY_D),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(4, 6, KEY_M),
+	KEY(5, 6, KEY_COMMA),
+
+	KEY(0, 7, KEY_PLAYCD),
+	KEY(1, 7, KEY_U),
+	KEY(2, 7, KEY_F),
+	KEY(3, 7, KEY_Z),
+	KEY(4, 7, KEY_SEMICOLON),
+	KEY(5, 7, KEY_DOT),
+};
+
+static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
+	.matrix_key_rows	= 7,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= z2_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+static void __init z2_mkp_init(void)
+{
+	pxa_set_keypad_info(&z2_keypad_platform_data);
+}
+#else
+static inline void z2_mkp_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button z2_pxa_buttons[] = {
+	{KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
+	{KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+};
+
+static struct gpio_keys_platform_data z2_pxa_keys_data = {
+	.buttons	= z2_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
+};
+
+static struct platform_device z2_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &z2_pxa_keys_data,
+	},
+};
+
+static void __init z2_keys_init(void)
+{
+	platform_device_register(&z2_pxa_keys);
+}
+#else
+static inline void z2_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * SSP Devices - WiFi and LCD control
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+/* WiFi */
+static int z2_lbs_spi_setup(struct spi_device *spi)
+{
+	int ret = 0;
+
+	ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+	if (ret)
+		goto err;
+
+	ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
+	if (ret)
+		goto err2;
+
+	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* Reset the card */
+	mdelay(180);
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
+	mdelay(20);
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_2,
+
+	spi_setup(spi);
+
+	return 0;
+
+err3:
+	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
+err2:
+	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+err:
+	return ret;
+};
+
+static int z2_lbs_spi_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
+	gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
+	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+	return 0;
+
+};
+
+static struct pxa2xx_spi_chip z2_lbs_chip_info = {
+	.rx_threshold	= 8,
+	.tx_threshold	= 8,
+	.timeout	= 1000,
+	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
+};
+
+static struct libertas_spi_platform_data z2_lbs_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= z2_lbs_spi_setup,
+	.teardown		= z2_lbs_spi_teardown,
+};
+
+/* LCD */
+static struct pxa2xx_spi_chip lms283_chip_info = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 64,
+	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
+};
+
+static const struct lms283gf05_pdata lms283_pdata = {
+	.reset_gpio	= GPIO19_ZIPITZ2_LCD_RESET,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+{
+	.modalias		= "libertas_spi",
+	.platform_data		= &z2_lbs_pdata,
+	.controller_data	= &z2_lbs_chip_info,
+	.irq			= gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+	.max_speed_hz		= 13000000,
+	.bus_num		= 1,
+	.chip_select		= 0,
+},
+{
+	.modalias		= "lms283gf05",
+	.controller_data	= &lms283_chip_info,
+	.platform_data		= &lms283_pdata,
+	.max_speed_hz		= 400000,
+	.bus_num		= 2,
+	.chip_select		= 0,
+},
+};
+
+static struct pxa2xx_spi_master pxa_ssp1_master_info = {
+	.clock_enable	= CKEN_SSP,
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.clock_enable	= CKEN_SSP2,
+	.num_chipselect	= 1,
+};
+
+static void __init z2_spi_init(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+#else
+static inline void z2_spi_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init z2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
+
+	z2_lcd_init();
+	z2_mmc_init();
+	z2_mkp_init();
+
+	pxa_set_i2c_info(NULL);
+
+	z2_spi_init();
+	z2_nor_init();
+	z2_pwm_init();
+	z2_leds_init();
+	z2_keys_init();
+}
+
+MACHINE_START(ZIPIT2, "Zipit Z2")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= z2_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 75f2a37..03b9cb9 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -387,11 +388,45 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
 	.enable_dma     = 1,
 };
 
-static struct platform_device pxa2xx_spi_ssp3_device = {
-	.name = "pxa2xx-spi",
-	.id = 3,
-	.dev = {
-		.platform_data = &pxa2xx_spi_ssp3_master_info,
+/* CAN bus on SPI */
+static int zeus_mcp2515_setup(struct spi_device *sdev)
+{
+	int err;
+
+	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
+	if (err)
+		return err;
+
+	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
+	if (err) {
+		gpio_free(ZEUS_CAN_SHDN_GPIO);
+		return err;
+	}
+
+	return 0;
+}
+
+static int zeus_mcp2515_transceiver_enable(int enable)
+{
+	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
+	return 0;
+}
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+	.oscillator_frequency	= 16*1000*1000,
+	.board_specific_setup	= zeus_mcp2515_setup,
+	.power_enable		= zeus_mcp2515_transceiver_enable,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+	[0] = {
+		.modalias	= "mcp2515",
+		.platform_data	= &zeus_mcp2515_pdata,
+		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
+		.max_speed_hz	= 1*1000*1000,
+		.bus_num	= 3,
+		.mode		= SPI_MODE_0,
+		.chip_select	= 0,
 	},
 };
 
@@ -457,15 +492,28 @@ static struct platform_device zeus_pcmcia_device = {
 	},
 };
 
+static struct resource zeus_max6369_resource = {
+	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
+	.flags		= IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+	.name		= "max6369_wdt",
+	.id		= -1,
+	.resource	= &zeus_max6369_resource,
+	.num_resources	= 1,
+};
+
 static struct platform_device *zeus_devices[] __initdata = {
 	&zeus_serial_device,
 	&zeus_mtd_devices[0],
 	&zeus_dm9k0_device,
 	&zeus_dm9k1_device,
 	&zeus_sram_device,
-	&pxa2xx_spi_ssp3_device,
 	&zeus_leds_device,
 	&zeus_pcmcia_device,
+	&zeus_max6369_device,
 };
 
 /* AC'97 */
@@ -509,7 +557,9 @@ static void zeus_ohci_exit(struct device *dev)
 
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	/* Clear Power Control Polarity Low and set Power Sense
+	 * Polarity Low. Supply power to USB ports. */
+	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
 	.init		= zeus_ohci_init,
 	.exit		= zeus_ohci_exit,
 };
@@ -592,7 +642,7 @@ static struct pxafb_mach_info zeus_fb_info = {
 
 static struct pxamci_platform_data zeus_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay		= HZ/4,
+	.detect_delay_ms	= 250,
 	.gpio_card_detect       = ZEUS_MMC_CD_GPIO,
 	.gpio_card_ro           = ZEUS_MMC_WP_GPIO,
 	.gpio_card_ro_invert	= 1,
@@ -621,11 +671,15 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 	.udc_command = zeus_udc_command,
 };
 
+#ifdef CONFIG_PM
 static void zeus_power_off(void)
 {
 	local_irq_disable();
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
+#else
+#define zeus_power_off   NULL
+#endif
 
 #ifdef CONFIG_APM_EMULATION
 static void zeus_get_power_status(struct apm_power_info *info)
@@ -706,6 +760,12 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
 };
 
 static mfp_cfg_t zeus_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
 	GPIO15_nCS_1,
 	GPIO78_nCS_2,
 	GPIO80_nCS_4,
@@ -731,6 +791,11 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 	GPIO104_CIF_DD_2,
 	GPIO105_CIF_DD_1,
 
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+	GPIO83_SSP3_SFRM,
+	GPIO84_SSP3_SCLK,
+
 	GPIO48_nPOE,
 	GPIO49_nPWE,
 	GPIO50_nPIOR,
@@ -785,6 +850,8 @@ static void __init zeus_init(void)
 	pxa_set_ac97_info(&zeus_ac97_info);
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
@@ -807,12 +874,6 @@ static struct map_desc zeus_io_desc[] __initdata = {
 		.type    = MT_DEVICE,
 	},
 	{
-		.virtual = ZEUS_CPLD_EXTWDOG,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
 		.virtual = ZEUS_PC104IO,
 		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
 		.length  = 0x00800000,
@@ -837,7 +898,7 @@ static void __init zeus_map_io(void)
 	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
 }
 
-MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 2b4043c..c479cbe 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -218,7 +218,7 @@ static inline void zylonite_init_lcd(void) {}
 
 #if defined(CONFIG_MMC)
 static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(0),
 	.gpio_card_ro	= EXT_GPIO(2),
@@ -226,7 +226,7 @@ static struct pxamci_platform_data zylonite_mci_platform_data = {
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(1),
 	.gpio_card_ro	= EXT_GPIO(3),
@@ -234,7 +234,7 @@ static struct pxamci_platform_data zylonite_mci2_platform_data = {
 };
 
 static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(30),
 	.gpio_card_ro	= EXT_GPIO(31),
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index ee5e392..b4575ae 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -18,6 +18,7 @@ config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -35,6 +36,7 @@ config MACH_REALVIEW_PB11MP
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index e704edb..a01b76b 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o clock.o
+obj-y					:= core.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
deleted file mode 100644
index a704311..0000000
--- a/arch/arm/mach-realview/clock.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst307.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst307_vco vco;
-	vco = icst307_khz_to_vco(clk->params, rate / 1000);
-	return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst307_vco vco;
-
-		vco = icst307_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst307_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h
deleted file mode 100644
index ebbb0f0..0000000
--- a/arch/arm/mach-realview/clock.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-
-struct clk {
-	unsigned long		rate;
-	const struct icst307_params *params;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst307_vco vco);
-};
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9f29343..02e9fde 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -25,12 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -39,7 +38,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -48,13 +47,12 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
+#include <plat/timer-sp.h>
 
 #include "core.h"
-#include "clock.h"
-
-#define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
 
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
@@ -78,20 +76,6 @@ void __init realview_adjust_zones(int node, unsigned long *size,
 }
 #endif
 
-/*
- * This is the RealView sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 179s.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v;
-
-	v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
-	do_div(v, 3);
-
-	return v;
-}
-
 
 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
 
@@ -273,37 +257,40 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 /*
  * Clock handling
  */
-static const struct icst307_params realview_oscvco_params = {
-	.ref		= 24000,
-	.vco_max	= 200000,
+static const struct icst_params realview_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
 	.vd_min		= 4 + 8,
 	.vd_max		= 511 + 8,
 	.rd_min		= 1 + 2,
 	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
 };
 
-static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
 	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	void __iomem *sys_osc;
 	u32 val;
 
-	if (machine_is_realview_pb1176())
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
-
-	val = readl(sys_osc) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys_osc);
+	writel(val, clk->vcoreg);
 	writel(0, sys_lock);
 }
 
+static const struct clk_ops oscvco_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= realview_oscvco_set,
+};
+
 static struct clk oscvco_clk = {
+	.ops	= &oscvco_clk_ops,
 	.params	= &realview_oscvco_params,
-	.setvco = realview_oscvco_set,
 };
 
 /*
@@ -346,10 +333,13 @@ static struct clk_lookup lookups[] = {
 
 static int __init clk_init(void)
 {
-	int i;
+	if (machine_is_realview_pb1176())
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+	else
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
 	return 0;
 }
 arch_initcall(clk_init);
@@ -646,133 +636,6 @@ void __iomem *timer2_va_base;
 void __iomem *timer3_va_base;
 
 /*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, timer0_va_base + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
-
-	writel(evt, timer0_va_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent =	 {
-	.name		= "timer0",
-	.shift		= 32,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= timer_set_mode,
-	.set_next_event	= timer_set_next_event,
-	.rating		= 300,
-	.cpumask	= cpu_all_mask,
-};
-
-static void __init realview_clockevents_init(unsigned int timer_irq)
-{
-	timer0_clockevent.irq = timer_irq;
-	timer0_clockevent.mult =
-		div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	clockevents_register_device(&timer0_clockevent);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	/* clear the interrupt */
-	writel(1, timer0_va_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction realview_timer_irq = {
-	.name		= "RealView Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= realview_timer_interrupt,
-};
-
-static cycle_t realview_get_cycles(struct clocksource *cs)
-{
-	return ~readl(timer3_va_base + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_realview = {
-	.name	= "timer3",
-	.rating	= 200,
-	.read	= realview_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init realview_clocksource_init(void)
-{
-	/* setup timer 0 as free-running clocksource */
-	writel(0, timer3_va_base + TIMER_CTRL);
-	writel(0xffffffff, timer3_va_base + TIMER_LOAD);
-	writel(0xffffffff, timer3_va_base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		timer3_va_base + TIMER_CTRL);
-
-	clocksource_realview.mult =
-		clocksource_khz2mult(1000, clocksource_realview.shift);
-	clocksource_register(&clocksource_realview);
-}
-
-/*
  * Set up the clock source and clock events devices
  */
 void __init realview_timer_init(unsigned int timer_irq)
@@ -799,13 +662,8 @@ void __init realview_timer_init(unsigned int timer_irq)
 	writel(0, timer2_va_base + TIMER_CTRL);
 	writel(0, timer3_va_base + TIMER_CTRL);
 
-	/* 
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(timer_irq, &realview_timer_irq);
-
-	realview_clocksource_init();
-	realview_clockevents_init(timer_irq);
+	sp804_clocksource_init(timer3_va_base);
+	sp804_clockevents_init(timer0_va_base, timer_irq);
 }
 
 /*
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index be048e3..f95521a 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -131,7 +131,7 @@ void platform_cpu_die(unsigned int cpu)
 	cpu_leave_lowpower();
 }
 
-int mach_cpu_disable(unsigned int cpu)
+int platform_cpu_disable(unsigned int cpu)
 {
 	/*
 	 * we don't allow CPU 0 to be shutdown (it is still too special
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
new file mode 100644
index 0000000..0c5d749
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/barriers.h
@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb()		dsb()
+#define rmb()		dmb()
+#define wmb()		mb()
diff --git a/arch/arm/mach-realview/include/mach/clkdev.h b/arch/arm/mach-realview/include/mach/clkdev.h
index 04b37a8..e58d077 100644
--- a/arch/arm/mach-realview/include/mach/clkdev.h
+++ b/arch/arm/mach-realview/include/mach/clkdev.h
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
+#include <plat/clock.h>
+
+struct clk {
+	unsigned long		rate;
+	const struct clk_ops	*ops;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
+};
+
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
 
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 932d8af..8662228 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 2410d4f..830055b 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -31,6 +31,7 @@
 #define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
 #define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
 #define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
 #define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
 #define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
 #define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/include/mach/irqs-pba8.h
index 86792a9..4a88a4e 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pba8.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pba8.h
@@ -23,12 +23,6 @@
 
 #define IRQ_PBA8_GIC_START			32
 
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
 /*
  * PB-A8 on-board gic irq sources
  */
@@ -65,6 +59,8 @@
 #define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
 
+#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
+
 /* ... */
 #define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
 #define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/include/mach/irqs-pbx.h
index deaad43..206a300 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pbx.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pbx.h
@@ -22,12 +22,6 @@
 
 #define IRQ_PBX_GIC_START			32
 
-/* L220
-#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
-*/
-
 /*
  * PBX on-board gic irq sources
  */
@@ -77,10 +71,10 @@
 #define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
 /* ... */
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
 
 /* ... */
 #define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 86c0c44..1b77a27 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -231,12 +231,6 @@
 #define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
 #define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
 
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      REALVIEW_BOOT_ROM_HI
-
 /*
  * System controller bit assignment
  */
@@ -249,20 +243,6 @@
 #define REALVIEW_TIMER4_EnSel	21
 
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
 #define REALVIEW_CSR_BASE             0x10000000
 #define REALVIEW_CSR_SIZE             0x10000000
 
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
index fe0de1b..a2a4c68 100644
--- a/arch/arm/mach-realview/include/mach/vmalloc.h
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		0xf8000000
+#define VMALLOC_END		0xf8000000UL
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7d857d3..4425018 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -44,7 +45,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_eb_io_desc[] __initdata = {
 	{
@@ -294,6 +294,36 @@ static struct resource realview_eb_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_EB11MP_PMU_CPU0,
+		.end		= IRQ_EB11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_EB11MP_PMU_CPU1,
+		.end		= IRQ_EB11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_EB11MP_PMU_CPU2,
+		.end		= IRQ_EB11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_EB11MP_PMU_CPU3,
+		.end		= IRQ_EB11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -407,6 +437,7 @@ static void __init realview_eb_init(void)
 		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
+		platform_device_register(&pmu_device);
 	}
 
 	realview_flash_register(&realview_eb_flash_resource, 1);
@@ -427,7 +458,7 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 44392e5..099a1f1 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb1176_io_desc[] __initdata = {
 	{
@@ -263,6 +263,19 @@ static struct resource realview_pb1176_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_DC1176_CORE_PMU,
+	.end		= IRQ_DC1176_CORE_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -324,6 +337,7 @@ static void __init realview_pb1176_init(void)
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -338,7 +352,7 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3e02731..0e07a5c 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -45,7 +46,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb11mp_io_desc[] __initdata = {
 	{
@@ -260,6 +260,36 @@ static struct resource realview_pb11mp_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_TC11MP_PMU_CPU0,
+		.end		= IRQ_TC11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_TC11MP_PMU_CPU1,
+		.end		= IRQ_TC11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_TC11MP_PMU_CPU2,
+		.end		= IRQ_TC11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_TC11MP_PMU_CPU3,
+		.end		= IRQ_TC11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -329,6 +359,7 @@ static void __init realview_pb11mp_init(void)
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pb11mp_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -343,7 +374,7 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index fe4e25c..ac2f06f 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -30,8 +30,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,7 +43,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pba8_io_desc[] __initdata = {
 	{
@@ -250,6 +250,19 @@ static struct resource realview_pba8_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_PBA8_PMU,
+	.end		= IRQ_PBA8_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -296,6 +309,7 @@ static void __init realview_pba8_init(void)
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pba8_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -310,7 +324,7 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b3..08fd683 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,7 +29,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/smp_twd.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -270,6 +272,36 @@ static struct resource realview_pbx_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_PBX_PMU_CPU0,
+		.end		= IRQ_PBX_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_PBX_PMU_CPU1,
+		.end		= IRQ_PBX_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_PBX_PMU_CPU2,
+		.end		= IRQ_PBX_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_PBX_PMU_CPU3,
+		.end		= IRQ_PBX_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PBX on-board GIC */
@@ -334,8 +366,8 @@ static void realview_pbx_reset(char mode)
 	 * in the system FPGA
 	 */
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
+	__raw_writel(0x00F0, reset_ctrl);
+	__raw_writel(0x00F4, reset_ctrl);
 }
 
 static void __init realview_pbx_init(void)
@@ -354,6 +386,7 @@ static void __init realview_pbx_init(void)
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
 		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+		platform_device_register(&pmu_device);
 	}
 #endif
 
@@ -377,7 +410,7 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index c47d974..85883b2 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -9,7 +9,6 @@
  *
  *  DMA functions specific to RiscPC architecture
  */
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index b2a939ff..6fc8d66 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x03000000
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index d586236..8c9e2c7 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -109,8 +109,6 @@ static inline void flush(void)
 {
 }
 
-static void error(char *x);
-
 /*
  * Setup for decompression
  */
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 5547318..7245a55 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -6,6 +6,7 @@ config CPU_S3C2410
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
@@ -76,6 +77,7 @@ config ARCH_H1940
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C2410_SETUP_TS
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -95,12 +97,19 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select MACH_N35
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
+config MACH_N35
+	bool
+	help
+	  Internal node in order to enable support for Acer N35 if Acer N30 is
+	  selected.
+
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
@@ -110,6 +119,7 @@ config ARCH_BAST
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_HWMON
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile.boot b/arch/arm/mach-s3c2410/Makefile.boot
index 7dab2a0..58c1dd7 100644
--- a/arch/arm/mach-s3c2410/Makefile.boot
+++ b/arch/arm/mach-s3c2410/Makefile.boot
@@ -1,3 +1,7 @@
-   zreladdr-y	:= 0x30008000
-params_phys-y	:= 0x30000100
-
+ifeq ($(CONFIG_PM_H1940),y)
+	zreladdr-y		:= 0x30108000
+	params_phys-y	:= 0x30100100
+else
+	zreladdr-y		:= 0x30008000
+	params_phys-y	:= 0x30000100
+endif
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 63b753f..0d8e043 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -21,7 +21,7 @@
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index b7d1f8d..8cdeb14 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -33,14 +33,15 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+
+		gpio_set_value(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
+		gpio_set_value(S3C2410_GPH(1), 0);
 	}
 	else {
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+		gpio_set_value(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
+		gpio_set_value(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 	}
@@ -56,20 +57,26 @@ static const struct rfkill_ops h1940bt_rfkill_ops = {
 	.set_block = h1940bt_set_block,
 };
 
-static int __init h1940bt_probe(struct platform_device *pdev)
+static int __devinit h1940bt_probe(struct platform_device *pdev)
 {
 	struct rfkill *rfk;
 	int ret = 0;
 
+	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
+	if (ret) {
+		dev_err(&pdev->dev, "could not get GPH1\n");\
+		return ret;
+	}
+
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
+	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
@@ -100,6 +107,7 @@ static int h1940bt_remove(struct platform_device *pdev)
 	struct rfkill *rfk = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
+	gpio_free(S3C2410_GPH(1));
 
 	if (rfk) {
 		rfkill_unregister(rfk);
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4c29a89..0eef78b 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 08ac5f9..cf68136 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -54,7 +54,7 @@ enum dma_ch {
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
+#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
 #define S3C_DMA_CHANNELS		(4)
 #else
 #define S3C_DMA_CHANNELS		(6)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
deleted file mode 100644
index f8b879a..0000000
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <plat/gpio-core.h>
-#include <mach/regs-gpio.h>
-
-extern struct s3c_gpio_chip s3c24xx_gpios[];
-
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
-{
-	struct s3c_gpio_chip *chip;
-
-	if (pin > S3C2410_GPG(10))
-		return NULL;
-
-	chip = &s3c24xx_gpios[pin/32];
-	return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 035a493..f453c4f 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -10,14 +10,28 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
 /* These functions are in the to-be-removed category and it is strongly
  * encouraged not to use these in new code. They will be marked deprecated
  * very soon.
  *
  * Most of the functionality can be either replaced by the gpiocfg calls
  * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
 */
 
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
+	s3c_gpio_cfgpin(pin, cfg);
+}
+
 /* external functions for GPIO support
  *
  * These allow various different clients to access the same GPIO
@@ -25,17 +39,6 @@
  * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
 */
 
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
 extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
 
 /* s3c2410_gpio_getirq
@@ -73,6 +76,14 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 
 /* s3c2410_gpio_pullup
  *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
  * configure the pull-up control on the given pin
  *
  * to = 1 => disable the pull-up
@@ -86,18 +97,8 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 
 extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
 
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
 extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
 
 extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
index 2edbb9c..4f7bf32 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
@@ -16,15 +16,28 @@
 
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
 
+/* GPIO sizes for various SoCs:
+ *
+ *             2442
+ *   2410 2412 2440 2443 2416
+ *   ---- ---- ---- ---- ----
+ * A 23   22   25   16   25
+ * B 11   11   11   11   9
+ * C 16   15   16   16   16
+ * D 16   16   16   16   16
+ * E 16   16   16   16   16
+ * F 8    8    8    8    8
+ * G 16   16   16   16   8
+ * H 11   11   9    15   15
+ * J --   --   13   16   --
+ * K --   --   --   --   16
+ * L --   --   --   15   7
+ * M --   --   --   2    2
+ */
+
 /* GPIO bank sizes */
 #define S3C2410_GPIO_A_NR	(32)
 #define S3C2410_GPIO_B_NR	(32)
@@ -34,6 +47,10 @@
 #define S3C2410_GPIO_F_NR	(32)
 #define S3C2410_GPIO_G_NR	(32)
 #define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
 
 #if CONFIG_S3C_GPIO_SPACE != 0
 #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
@@ -53,6 +70,10 @@ enum s3c_gpio_number {
 	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
 	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
 	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
 };
 
 #endif /* __ASSEMBLY__ */
@@ -67,6 +88,10 @@ enum s3c_gpio_number {
 #define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
 #define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
 #define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
 
 /* compatibility until drivers can be modified */
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
new file mode 100644
index 0000000..d67819d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 - GPIO core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+#include <mach/regs-gpio.h>
+
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip;
+
+	if (pin > S3C_GPIO_END)
+		return NULL;
+
+	chip = &s3c24xx_gpios[pin/32];
+	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 15f0b3e..b649bf2 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -20,10 +20,18 @@
  * devices that need GPIO.
  */
 
+#ifdef CONFIG_CPU_S3C244X
+#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#else
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#endif
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
 
+#ifdef CONFIG_CPU_S3C24XX
+#define S3C_GPIO_END	(S3C2410_GPIO_BANKJ + 32)
+#else
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 6c12c63..11bb0f0 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -115,6 +115,26 @@
 #define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
 #define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
 
+
+#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
+
+
 /* extra irqs for s3c2440 */
 
 #define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
@@ -130,7 +150,10 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
+
 #define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+#define IRQ_HSMMC1		IRQ_S3C2416_HSMMC0
 
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
@@ -152,7 +175,7 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#ifdef CONFIG_CPU_S3C2443
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
@@ -164,6 +187,9 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
+
 #ifdef CONFIG_CPU_S3C2440
 #define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
 #else
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index b049e61..cd3983a 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -63,9 +63,11 @@
 #define S3C2440_PA_AC97	   (0x5B000000)
 #define S3C2440_SZ_AC97	   SZ_1M
 
-/* S3C2443 High-speed SD/MMC */
+/* S3C2443/S3C2416 High-speed SD/MMC */
 #define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
+#define S3C2416_PA_HSMMC0  (0x4AC00000)
+
+#define	S3C2443_PA_FB	(0x4C800000)
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
@@ -106,10 +108,13 @@
 #define S3C24XX_PA_SDI      S3C2410_PA_SDI
 #define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
+#define S3C_PA_FB	    S3C2443_PA_FB
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_HSMMC1	    S3C2416_PA_HSMMC0
+#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
new file mode 100644
index 0000000..70a83b2
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -0,0 +1,64 @@
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+}
+
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+				    unsigned long mask);
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+		  __raw_readl(S3C2410_SRCPND),
+		  __raw_readl(S3C2410_EINTPEND));
+
+	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				s3c_irqwake_intmask);
+
+	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				s3c_irqwake_eintmask);
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 9a0d169..3415b60 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -161,4 +161,6 @@
 
 #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
 
+#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
+
 #endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
index 3c3853c..98fd4a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -19,6 +19,42 @@
 #define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
 #endif
 
+#if defined(CONFIG_CPU_S3C2416)
+#define S3C2416_DSC0	   S3C2410_GPIOREG(0xc0)
+#define S3C2416_DSC1	   S3C2410_GPIOREG(0xc4)
+#define S3C2416_DSC2	   S3C2410_GPIOREG(0xc8)
+#define S3C2416_DSC3	   S3C2410_GPIOREG(0x110)
+
+#define S3C2416_SELECT_DSC0	(0 << 30)
+#define S3C2416_SELECT_DSC1	(1 << 30)
+#define S3C2416_SELECT_DSC2	(2 << 30)
+#define S3C2416_SELECT_DSC3	(3 << 30)
+
+#define S3C2416_DSC_GETSHIFT(x)	(x & 30)
+
+#define S3C2416_DSC0_CF		(S3C2416_SELECT_DSC0 | 28)
+#define	S3C2416_DSC0_CF_5mA	(0 << 28)
+#define	S3C2416_DSC0_CF_10mA	(1 << 28)
+#define	S3C2416_DSC0_CF_15mA	(2 << 28)
+#define	S3C2416_DSC0_CF_21mA	(3 << 28)
+#define	S3C2416_DSC0_CF_MASK	(3 << 28)
+
+#define S3C2416_DSC0_nRBE	(S3C2416_SELECT_DSC0 | 26)
+#define	S3C2416_DSC0_nRBE_5mA	(0 << 26)
+#define	S3C2416_DSC0_nRBE_10mA	(1 << 26)
+#define	S3C2416_DSC0_nRBE_15mA	(2 << 26)
+#define	S3C2416_DSC0_nRBE_21mA	(3 << 26)
+#define	S3C2416_DSC0_nRBE_MASK	(3 << 26)
+
+#define S3C2416_DSC0_nROE	(S3C2416_SELECT_DSC0 | 24)
+#define	S3C2416_DSC0_nROE_5mA	(0 << 24)
+#define	S3C2416_DSC0_nROE_10mA	(1 << 24)
+#define	S3C2416_DSC0_nROE_15mA	(2 << 24)
+#define	S3C2416_DSC0_nROE_21mA	(3 << 24)
+#define	S3C2416_DSC0_nROE_MASK	(3 << 24)
+
+#endif
+
 #if defined(CONFIG_CPU_S3C244X)
 
 #define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index ebc85c6..a0a89d4 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -17,29 +17,11 @@
 #include <mach/gpio-nrs.h>
 
 #ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2400_MISCCR
+#define S3C24XX_MISCCR		S3C2400_MISCCR
 #else
-#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
 #endif /* CONFIG_CPU_S3C2400 */
 
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
-                                 (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
-                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
-                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
 /* general configuration options */
 
 #define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
@@ -406,31 +388,31 @@
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
 
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
@@ -610,35 +592,73 @@
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
+#define S3C2416_GPH0_TXD0  (0x02 << 0)
 
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
+#define S3C2416_GPH1_RXD0  (0x02 << 2)
 
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
+#define S3C2416_GPH2_TXD1   (0x02 << 4)
 
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
+#define S3C2416_GPH3_RXD1   (0x02 << 6)
 
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
+#define S3C2416_GPH4_TXD2   (0x02 << 8)
 
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
+#define S3C2416_GPH5_RXD2   (0x02 << 10)
 
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2416_GPH6_TXD3   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
+#define S3C2416_GPH6_nRTS2  (0x03 << 12)
 
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2416_GPH7_RXD3   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
+#define S3C2416_GPH7_nCTS2  (0x03 << 14)
 
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
+#define S3C2416_GPH8_nCTS0  (0x02 << 16)
 
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+#define S3C2416_GPH9_nRTS0    (0x02 << 18)
 
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1   (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1   (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
  * GPH, which means all registers after 0x80 are now offset by 0x10
  * for the 2412/2413 from the 2410/2440/2442
 */
 
+/* S3C2443 and above */
+#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
+
 /* miscellaneous control */
 #define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
@@ -686,6 +706,7 @@
 #define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
 
 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
 
 #define S3C2410_MISCCR_nRSTCON	    (1<<16)
@@ -695,6 +716,9 @@
 #define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
 #define S3C2410_MISCCR_SDSLEEP	    (7<<17)
 
+#define S3C2416_MISCCR_FLT_I2C      (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
+
 /* external interrupt control... */
 /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
  * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
@@ -762,8 +786,11 @@
 #define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
 #define S3C2410_GSTATUS1_2410	   (0x32410000)
 #define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2416	   (0x32416003)
 #define S3C2410_GSTATUS1_2440	   (0x32440000)
 #define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450	   (0x32450003)
 
 #define S3C2410_GSTATUS2_WTRESET   (1<<2)
 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
index 1202ca5..19575e0 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -22,85 +22,49 @@
  * pull up works like all other ports.
 */
 
-#define S3C2440_GPIO_BANKJ  (416)
-
-#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
-
 #define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
 #define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
 #define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
 #define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
 
-#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
-#define S3C2440_GPJ0_INP        (0x00 << 0)
 #define S3C2440_GPJ0_OUTP       (0x01 << 0)
 #define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
 
-#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
-#define S3C2440_GPJ1_INP        (0x00 << 2)
 #define S3C2440_GPJ1_OUTP       (0x01 << 2)
 #define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
 
-#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
-#define S3C2440_GPJ2_INP        (0x00 << 4)
 #define S3C2440_GPJ2_OUTP       (0x01 << 4)
 #define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
 
-#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
-#define S3C2440_GPJ3_INP        (0x00 << 6)
 #define S3C2440_GPJ3_OUTP       (0x01 << 6)
 #define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
 
-#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
-#define S3C2440_GPJ4_INP        (0x00 << 8)
 #define S3C2440_GPJ4_OUTP       (0x01 << 8)
 #define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
 
-#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
-#define S3C2440_GPJ5_INP        (0x00 << 10)
 #define S3C2440_GPJ5_OUTP       (0x01 << 10)
 #define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
 
-#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
-#define S3C2440_GPJ6_INP        (0x00 << 12)
 #define S3C2440_GPJ6_OUTP       (0x01 << 12)
 #define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
 
-#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
-#define S3C2440_GPJ7_INP        (0x00 << 14)
 #define S3C2440_GPJ7_OUTP       (0x01 << 14)
 #define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
 
-#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
-#define S3C2440_GPJ8_INP        (0x00 << 16)
 #define S3C2440_GPJ8_OUTP       (0x01 << 16)
 #define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
 
-#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
-#define S3C2440_GPJ9_INP        (0x00 << 18)
 #define S3C2440_GPJ9_OUTP       (0x01 << 18)
 #define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
 
-#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
-#define S3C2440_GPJ10_INP       (0x00 << 20)
 #define S3C2440_GPJ10_OUTP      (0x01 << 20)
 #define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
 
-#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
-#define S3C2440_GPJ11_INP       (0x00 << 22)
 #define S3C2440_GPJ11_OUTP      (0x01 << 22)
 #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
 
-#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
-#define S3C2440_GPJ12_INP       (0x00 << 24)
 #define S3C2440_GPJ12_OUTP      (0x01 << 24)
 #define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
 
-#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
-#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
-#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
-
 #endif	/* __ASM_ARCH_REGS_GPIOJ_H */
 
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
index de86ee8..0f07ba3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -27,6 +27,16 @@
 #define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
 #define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
 
+#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
+
 /* mask: 0=enable, 1=disable
  * 1 bit EINT, 4=EINT4, 23=EINT23
  * EINT0,1,2,3 are not handled here.
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
new file mode 100644
index 0000000..2f31b74
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2416_MEM
+#define __ASM_ARM_REGS_S3C2416_MEM
+
+#ifndef S3C2416_MEMREG
+#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
+#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
+#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
+#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
+
+#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
+#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
new file mode 100644
index 0000000..e443167
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2416_H
+#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
+
+#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
+#define S3C2416_SWRST_RESET	(0x533C2416)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2416_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 6026d09..08ab9df 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -42,23 +42,14 @@
 
 #define S3C2443_PLLCON_OFF		(1<<24)
 
-#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
-#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
-#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
-
 #define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
 #define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
 #define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
 #define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
-#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
-#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
 #define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
 
-#define S3C2443_CLKDIV0_DVS		(1<<13)
 #define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
 #define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
 
@@ -81,28 +72,7 @@
 #define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
 #define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
 
-/* S3C2443_CLKDIV1 */
-
-#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
-#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
-
-#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
-#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
-
-#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
-#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
-
-#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
-#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
-
-#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
-#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
-
-#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
 
 #define S3C2443_CLKCON_NAND
 
@@ -113,8 +83,7 @@
 #define S3C2443_HCLKCON_DMA4		(1<<4)
 #define S3C2443_HCLKCON_DMA5		(1<<5)
 #define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_DISP		(1<<9)
-#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_LCDC		(1<<9)
 #define S3C2443_HCLKCON_USBH		(1<<11)
 #define S3C2443_HCLKCON_USBD		(1<<12)
 #define S3C2443_HCLKCON_HSMMC		(1<<16)
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 980a099..dcef228 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -3,7 +3,7 @@
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - SPI Controller platfrom_device info
+ * S3C2410 - SPI Controller platform_device info
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 0000000..fe9ca1f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
deleted file mode 100644
index dc36170..0000000
--- a/arch/arm/mach-s3c2410/include/mach/ts.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/include/asm/arch-s3c2410/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index 72f756c..8b283f8 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -40,7 +40,9 @@ static void arch_detect_cpu(void)
 	cpuid &= S3C2410_GSTATUS1_IDMASK;
 
 	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
+	    cpuid == S3C2410_GSTATUS1_2442 ||
+	    cpuid == S3C2410_GSTATUS1_2416 ||
+	    cpuid == S3C2410_GSTATUS1_2450) {
 		fifo_mask = S3C2440_UFSTAT_TXMASK;
 		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
 	} else {
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 0000000..315b007
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 06a84ad..34fc05a 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -56,6 +56,7 @@
 #include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
@@ -153,7 +154,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
         &s3c_device_sdi,
@@ -225,8 +226,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
+		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
 	}
 }
 static void __init amlm5900_init(void)
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 97162fd..c1f90f6 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -61,6 +61,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/gpio-cfg.h>
 #include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
@@ -216,15 +217,13 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
+	gpio_direction_output(S3C2410_GPA(21), 1);
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -584,7 +583,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -634,7 +633,7 @@ static void __init bast_map_io(void)
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
+	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
@@ -658,6 +657,8 @@ static void __init bast_init(void)
 	nor_simtec_init();
 	simtec_audio_add(NULL, true, &bast_audio);
 
+	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
+	
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1e34abe..779b45b 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -46,16 +46,17 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <mach/ts.h>
 #include <plat/udc.h>
 #include <plat/iic.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
 #include <plat/mci.h>
+#include <plat/ts.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -145,6 +146,7 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
 		.delay = 10000,
 		.presc = 49,
 		.oversampling_shift = 2,
+		.cfg_gpio = s3c24xx_ts_cfg_gpio,
 };
 
 /**
@@ -162,8 +164,8 @@ static struct s3c2410fb_display h1940_lcd __initdata = {
 	.xres =		240,
 	.yres =		320,
 	.bpp =		16,
-	.left_margin =	20,
-	.right_margin =	8,
+	.left_margin =	8,
+	.right_margin =	20,
 	.hsync_len =	4,
 	.upper_margin =	8,
 	.lower_margin = 7,
@@ -196,7 +198,7 @@ static struct platform_device h1940_device_bluetooth = {
 	.id               = -1,
 };
 
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power     = NULL,
@@ -207,16 +209,16 @@ static int h1940_backlight_init(struct device *dev)
 {
 	gpio_request(S3C2410_GPB(0), "Backlight");
 
-	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
-	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	gpio_direction_output(S3C2410_GPB(0), 0);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
 
 	return 0;
 }
 
 static void h1940_backlight_exit(struct device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+	gpio_direction_output(S3C2410_GPB(0), 1);
 }
 
 static struct platform_pwm_backlight_data backlight_data = {
@@ -245,18 +247,18 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd,
 
 	if (!power) {
 		/* set to 3ec */
-		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		gpio_direction_output(S3C2410_GPC(0), 0);
 		/* wait for 3ac */
 		do {
-			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+			value = gpio_get_value(S3C2410_GPC(6));
 		} while (value);
 		/* set to 38c */
-		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+		gpio_direction_output(S3C2410_GPC(5), 0);
 	} else {
 		/* Set to 3ac */
-		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		gpio_direction_output(S3C2410_GPC(5), 1);
 		/* Set to 3ad */
-		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+		gpio_direction_output(S3C2410_GPC(0), 1);
 	}
 }
 
@@ -271,8 +273,7 @@ static struct platform_device h1940_lcd_powerdev = {
 };
 
 static struct platform_device *h1940_devices[] __initdata = {
-	&s3c_device_ts,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -285,6 +286,8 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_timer[0],
 	&h1940_backlight,
 	&h1940_lcd_powerdev,
+	&s3c_device_adc,
+	&s3c_device_ts,
 };
 
 static void __init h1940_map_io(void)
@@ -311,12 +314,11 @@ static void __init h1940_init(void)
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -333,12 +335,13 @@ static void __init h1940_init(void)
 	gpio_request(S3C2410_GPC(5), "LCD power");
 	gpio_request(S3C2410_GPC(6), "LCD power");
 
+	gpio_direction_input(S3C2410_GPC(6));
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0405712..41f299d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,6 +26,7 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -46,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/mci.h>
 #include <plat/s3c2410.h>
 #include <plat/udc.h>
 
@@ -86,10 +88,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
+		gpio_set_value(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
+		gpio_set_value(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -172,8 +174,10 @@ static struct gpio_keys_button n35_buttons[] = {
 	{
 		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
+		.type		= EV_PWR,
 		.desc		= "Power",
 		.active_low	= 0,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= S3C2410_GPG(9),
@@ -264,6 +268,14 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.def_trigger	= "",
 };
 
+/* This is the blue LED on the device. Originaly used to indicate GPS activity
+ * by flashing. */
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+	.name		= "blue_led",
+	.gpio		= S3C2410_GPD(8),
+	.def_trigger	= "",
+};
+
 /* This LED is driven by the battery microcontroller, and is blinking
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
@@ -275,6 +287,13 @@ static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.def_trigger	= "",
 };
 
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+	.name		= "warning_led",
+	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.gpio		= S3C2410_GPD(9),
+	.def_trigger	= "",
+};
+
 static struct platform_device n30_blue_led = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
@@ -283,6 +302,14 @@ static struct platform_device n30_blue_led = {
 	},
 };
 
+static struct platform_device n35_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n35_blue_led_pdata,
+	},
+};
+
 static struct platform_device n30_warning_led = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
@@ -291,6 +318,14 @@ static struct platform_device n30_warning_led = {
 	},
 };
 
+static struct platform_device n35_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n35_warning_led_pdata,
+	},
+};
+
 static struct s3c2410fb_display n30_display __initdata = {
 	.type		= S3C2410_LCDCON1_TFT,
 	.width		= 240,
@@ -317,13 +352,36 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
 	.lpcsel		= 0x06,
 };
 
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		gpio_set_value(S3C2410_GPG(4), 1);
+		break;
+	case MMC_POWER_OFF:
+	default:
+		gpio_set_value(S3C2410_GPG(4), 0);
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+	.gpio_detect	= S3C2410_GPF(1),
+	.gpio_wprotect  = S3C2410_GPG(10),
+	.ocr_avail	= MMC_VDD_32_33,
+	.set_power	= n30_sdi_set_power,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-	&s3c_device_usb,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n30_button_device,
 	&n30_blue_led,
 	&n30_warning_led,
@@ -334,8 +392,12 @@ static struct platform_device *n35_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n35_button_device,
+	&n35_blue_led,
+	&n35_warning_led,
 };
 
 static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
@@ -490,17 +552,15 @@ static void __init n30_map_io(void)
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 }
 
-static void __init n30_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
 {
+	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
 	s3c24xx_fb_set_platdata(&n30_fb_info);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c24xx_mci_set_platdata(&n30_mci_cfg);
 	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
@@ -532,10 +592,13 @@ static void __init n30_init(void)
 		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND1);
+				      S3C2410_MISCCR_USBSUSPND0);
 
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
+
+	WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
+	gpio_direction_output(S3C2410_GPB(3), 0);
 }
 
 MACHINE_START(N30, "Acer-N30")
@@ -547,7 +610,7 @@ MACHINE_START(N30, "Acer-N30")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
 
@@ -559,6 +622,6 @@ MACHINE_START(N35, "Acer-N35")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f6c7261..d8c7f2e 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
 /* Standard OTOM devices */
 
 static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index ab092bc..d0e87b6 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -58,6 +58,7 @@
 #include <plat/iic.h>
 
 #include <plat/common-smdk.h>
+#include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -219,10 +220,10 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
+		gpio_set_value(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
+		gpio_set_value(S3C2410_GPB(5), 1);
 		break;
 	}
 }
@@ -246,7 +247,7 @@ static struct platform_device qt2410_spi = {
 /* Board devices */
 
 static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -347,13 +348,14 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs"));
+	gpio_direction_output(S3C2410_GPB(5), 1);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index c49126c..4522230 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
 };
 
 static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 8fdb043..929164a 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 0d61fb5..d540d79 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -334,7 +334,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -357,8 +357,7 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
+	gpio_direction_output(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
@@ -395,6 +394,8 @@ static void __init vr1000_init(void)
 
 	nor_simtec_init();
 	simtec_audio_add(NULL, true, NULL);
+
+	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 966119c..725636f 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -60,10 +60,10 @@ static void s3c2410_pm_prepare(void)
 		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	/* the RX3715 uses similar code and the same H1940 and the
+	/* RX3715 and RX1950 use similar to H1940 code and the
 	 * same offsets for resume and checksum pointers */
 
-	if (machine_is_rx3715()) {
+	if (machine_is_rx3715() || machine_is_rx1950()) {
 		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
 		unsigned long ptr;
 		unsigned long calc = 0;
@@ -79,6 +79,17 @@ static void s3c2410_pm_prepare(void)
 	if ( machine_is_aml_m5900() )
 		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
+	if (machine_is_rx1950()) {
+		/* According to S3C2442 user's manual, page 7-17,
+		 * when the system is operating in NAND boot mode,
+		 * the hardware pin configuration - EINT[23:21] –
+		 * must be set as input for starting up after
+		 * wakeup from sleep mode
+		 */
+		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+	}
 }
 
 static int s3c2410_pm_resume(struct sys_device *dev)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 91ba42f..adc90a3 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -40,6 +41,10 @@
 #include <plat/clock.h>
 #include <plat/pll.h>
 
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -65,6 +70,9 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2410_map_io(void)
 {
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b9d0d8..29bd3d9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -91,7 +91,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 	}
 }
 
-static struct s3c2410_hcd_info usb_simtec_info = {
+static struct s3c2410_hcd_info usb_simtec_info __initdata = {
 	.port[0]	= {
 		.flags	= S3C_HCDFLG_USED
 	},
@@ -127,6 +127,6 @@ int usb_simtec_init(void)
 	gpio_direction_output(S3C2410_GPB(4), 1);
 	gpio_direction_input(S3C2410_GPG(10));
 
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
+	s3c_ohci_set_platdata(&usb_simtec_info);
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 9a8c065..cef6a65 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,8 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
 config S3C2412_DMA
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index a037df5..0c0505b 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -124,7 +124,9 @@ static struct clk clk_usysclk = {
 	.name		= "usysclk",
 	.id		= -1,
 	.parent		= &clk_xtal,
-	.set_parent	= s3c2412_setparent_usysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_usysclk,
+	},
 };
 
 static struct clk clk_mrefclk = {
@@ -199,10 +201,12 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
 static struct clk clk_usbsrc = {
 	.name		= "usbsrc",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_usbsrc,
-	.set_rate	= s3c2412_setrate_usbsrc,
-	.round_rate	= s3c2412_roundrate_usbsrc,
-	.set_parent	= s3c2412_setparent_usbsrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_usbsrc,
+		.set_rate	= s3c2412_setrate_usbsrc,
+		.round_rate	= s3c2412_roundrate_usbsrc,
+		.set_parent	= s3c2412_setparent_usbsrc,
+	},
 };
 
 static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
@@ -225,7 +229,9 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
 static struct clk clk_msysclk = {
 	.name		= "msysclk",
 	.id		= -1,
-	.set_parent	= s3c2412_setparent_msysclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_msysclk,
+	},
 };
 
 static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
@@ -264,7 +270,9 @@ static struct clk clk_armclk = {
 	.name		= "armclk",
 	.id		= -1,
 	.parent		= &clk_msysclk,
-	.set_parent	= s3c2412_setparent_armclk,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2412_setparent_armclk,
+	},
 };
 
 /* these next clocks have an divider immediately after them,
@@ -337,10 +345,12 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
 static struct clk clk_uart = {
 	.name		= "uartclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_uart,
-	.set_rate	= s3c2412_setrate_uart,
-	.set_parent	= s3c2412_setparent_uart,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_uart,
+		.set_rate	= s3c2412_setrate_uart,
+		.set_parent	= s3c2412_setparent_uart,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
@@ -388,10 +398,12 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
 static struct clk clk_i2s = {
 	.name		= "i2sclk",
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_i2s,
-	.set_rate	= s3c2412_setrate_i2s,
-	.set_parent	= s3c2412_setparent_i2s,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_i2s,
+		.set_rate	= s3c2412_setrate_i2s,
+		.set_parent	= s3c2412_setparent_i2s,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
@@ -438,10 +450,12 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
 static struct clk clk_cam = {
 	.name		= "camif-upll",	/* same as 2440 name */
 	.id		= -1,
-	.get_rate	= s3c2412_getrate_cam,
-	.set_rate	= s3c2412_setrate_cam,
-	.set_parent	= s3c2412_setparent_cam,
-	.round_rate	= s3c2412_roundrate_clksrc,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2412_getrate_cam,
+		.set_rate	= s3c2412_setrate_cam,
+		.set_parent	= s3c2412_setparent_cam,
+		.round_rate	= s3c2412_roundrate_clksrc,
+	},
 };
 
 /* standard clock definitions */
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f8d16fc..7abecfc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
@@ -30,7 +30,6 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <plat/regs-s3c2412-iis.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
@@ -119,13 +118,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
 		.name		= "i2s-sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2412_IISRXD,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2412_IISTXD,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index f7afece..3404a87 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -16,41 +16,43 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/regs-gpio.h>
-
 #include <mach/hardware.h>
 
+#include <plat/gpio-core.h>
+
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
 	unsigned long flags;
 	unsigned long slpcon;
 
 	offs *= 2;
 
-	if (pin < S3C2410_GPIO_BANKB)
+	if (pin < S3C2410_GPB(0))
 		return -EINVAL;
 
-	if (pin >= S3C2410_GPIO_BANKF &&
-	    pin <= S3C2410_GPIO_BANKG)
+	if (pin >= S3C2410_GPF(0) &&
+	    pin <= S3C2410_GPG(16))
 		return -EINVAL;
 
-	if (pin > (S3C2410_GPIO_BANKH + 32))
+	if (pin > S3C2410_GPH(16))
 		return -EINVAL;
 
 	local_irq_save(flags);
 
-	slpcon = __raw_readl(base + 0x0C);
+	slpcon = __raw_readl(chip->base + 0x0C);
 
 	slpcon &= ~(3 << offs);
 	slpcon |= state << offs;
 
-	__raw_writel(slpcon, base + 0x0C);
+	__raw_writel(slpcon, chip->base + 0x0C);
 
 	local_irq_restore(flags);
 
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index c9fa3fc..478f4b4 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -48,6 +48,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -357,8 +358,7 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
+	gpio_set_value(S3C2410_GPG(13), set);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -391,7 +391,7 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
+	gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
@@ -413,7 +413,7 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
+	gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
@@ -468,7 +468,7 @@ static struct i2c_board_info jive_i2c_devs[] __initdata = {
 /* The platform devices being used. */
 
 static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -531,7 +531,7 @@ static void jive_power_off(void)
 	printk(KERN_INFO "powering system down...\n");
 
 	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -636,22 +636,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPG(13), "lcm reset");
+	gpio_direction_output(S3C2410_GPG(13), 0);
 
-	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPB(7), "jive spi");
+	gpio_direction_output(S3C2410_GPB(7), 1);
 
 	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
+	gpio_direction_output(S3C2410_GPH(10), 1);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -674,7 +674,7 @@ static void __init jive_machine_init(void)
 }
 
 MACHINE_START(JIVE, "JIVE")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 9a5e434..ba93a35 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+			gpio_set_value(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+			gpio_set_value(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -104,8 +104,7 @@ static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
 
 
 static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_usb,
-	//&s3c_device_lcd,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
@@ -135,8 +134,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull"));
+	gpio_direction_output(S3C2410_GPF(2), 0);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
@@ -151,7 +150,7 @@ static void __init smdk2413_machine_init(void)
 }
 
 MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
@@ -164,7 +163,7 @@ MACHINE_START(S3C2413, "S3C2413")
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
@@ -177,7 +176,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index a6ba591..3ca9265 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -121,7 +121,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
new file mode 100644
index 0000000..657e4fe
--- /dev/null
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -0,0 +1,39 @@
+# arch/arm/mach-s3c2416/Kconfig
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
+config CPU_S3C2416
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM926T
+	select S3C2416_DMA if S3C2410_DMA
+	select CPU_LLSERIAL_S3C2440
+	select S3C_GPIO_PULL_UPDOWN
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
+config S3C2416_DMA
+	bool
+	depends on CPU_S3C2416
+	help
+	  Internal config node for S3C2416 DMA support
+
+menu "S3C2416 Machines"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select CPU_S3C2416
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2416
+
+endmenu
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
new file mode 100644
index 0000000..6c12c7b
--- /dev/null
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s3c2416/Makefile
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
+obj-$(CONFIG_CPU_S3C2416)	+= irq.o
+
+#obj-$(CONFIG_S3C2416_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
new file mode 100644
index 0000000..7ccf5a2
--- /dev/null
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -0,0 +1,135 @@
+/* linux/arch/arm/mach-s3c2416/clock.c
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * S3C2416 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <plat/s3c2416.h>
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/pll6553x.h>
+#include <plat/pll.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2443-clock.h>
+
+static unsigned int armdiv[8] = {
+	[0] = 1,
+	[1] = 2,
+	[2] = 3,
+	[3] = 4,
+	[5] = 6,
+	[7] = 8,
+};
+
+/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
+static struct clksrc_clk hsmmc_div[] = {
+	[0] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 1,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
+	},
+	[1] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 0,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
+	},
+};
+
+static struct clksrc_clk hsmmc_mux[] = {
+	[0] = {
+		.clk	= {
+			.id	= 1,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 6),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[0].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+	},
+	[1] = {
+		.clk	= {
+			.id	= 0,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 12),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[1].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
+	},
+};
+
+
+static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+void __init_or_cpufreq s3c2416_setup_clocks(void)
+{
+	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+}
+
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsmmc_div[0],
+	&hsmmc_div[1],
+	&hsmmc_mux[0],
+	&hsmmc_mux[1],
+};
+
+void __init s3c2416_init_clocks(int xtal)
+{
+	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
+	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
+	int ptr;
+
+	/* s3c2416 EPLL compatible with s3c64xx */
+	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
+
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_pwmclk_init();
+
+}
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
new file mode 100644
index 0000000..89f521d
--- /dev/null
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -0,0 +1,254 @@
+/* linux/arch/arm/mach-s3c2416/irq.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
+{
+	unsigned int subsrc, submsk;
+	unsigned int end;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc  &= ~submsk;
+	subsrc >>= (irq - S3C2410_IRQSUB(0));
+	subsrc  &= (1 << len)-1;
+
+	end = len + irq;
+
+	for (; irq < end && subsrc; irq++) {
+		if (subsrc & 1)
+			generic_handle_irq(irq);
+
+		subsrc >>= 1;
+	}
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2416_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2416_irq_wdtac97 = {
+	.mask	    = s3c2416_irq_wdtac97_mask,
+	.unmask	    = s3c2416_irq_wdtac97_unmask,
+	.ack	    = s3c2416_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2416_irq_lcd_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2416_irq_lcd = {
+	.mask	    = s3c2416_irq_lcd_mask,
+	.unmask	    = s3c2416_irq_lcd_unmask,
+	.ack	    = s3c2416_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
+}
+
+#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2416_irq_dma_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2416_irq_dma_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2416_irq_dma_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2416_irq_dma = {
+	.mask	    = s3c2416_irq_dma_mask,
+	.unmask	    = s3c2416_irq_dma_unmask,
+	.ack	    = s3c2416_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2416_irq_uart3_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2416_irq_uart3 = {
+	.mask	    = s3c2416_irq_uart3_mask,
+	.unmask	    = s3c2416_irq_uart3_unmask,
+	.ack	    = s3c2416_irq_uart3_ack,
+};
+
+
+/* IRQ initialisation code */
+
+static int __init s3c2416_add_sub(unsigned int base,
+				   void (*demux)(unsigned int,
+						 struct irq_desc *),
+				   struct irq_chip *chip,
+				   unsigned int start, unsigned int end)
+{
+	unsigned int irqno;
+
+	set_irq_chip(base, &s3c_irq_level_chip);
+	set_irq_handler(base, handle_level_irq);
+	set_irq_chained_handler(base, demux);
+
+	for (irqno = start; irqno <= end; irqno++) {
+		set_irq_chip(irqno, chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static int __init s3c2416_irq_add(struct sys_device *sysdev)
+{
+	printk(KERN_INFO "S3C2416: IRQ Support\n");
+
+	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
+			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
+
+	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
+			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
+			&s3c2416_irq_uart3,
+			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
+			&s3c2416_irq_wdtac97,
+			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2416_irq_driver = {
+	.add		= s3c2416_irq_add,
+};
+
+static int __init s3c2416_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+}
+
+arch_initcall(s3c2416_irq_init);
+
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
new file mode 100644
index 0000000..5fc3f67
--- /dev/null
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -0,0 +1,206 @@
+/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/leds-gpio.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2416.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/nand.h>
+
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+
+#include <plat/common-smdk.h>
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON (S3C2410_UCON_DEFAULT	| \
+		S3C2440_UCON_PCLK	| \
+		S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8	| \
+		S3C2410_UFCON_FIFOMODE	| \
+		S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | 0x50,
+		.ufcon	     = UFCON,
+	}
+};
+
+struct s3c_fb_pd_win smdk2416_fb_win[] = {
+	[0] = {
+		/* think this is the same as the smdk6410 */
+		.win_mode	= {
+			.pixclock	= 41094,
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres           = 800,
+			.yres           = 480,
+		},
+		.default_bpp	= 16,
+		.max_bpp	= 32,
+	},
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+	.win[0]		= &smdk2416_fb_win[0],
+	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+	&s3c_device_fb,
+	&s3c_device_wdt,
+	&s3c_device_ohci,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+};
+
+static void __init smdk2416_map_io(void)
+{
+	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+}
+
+static void __init smdk2416_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+	gpio_request(S3C2410_GPB(4), "USBHost Power");
+	gpio_direction_output(S3C2410_GPB(4), 1);
+
+	gpio_request(S3C2410_GPB(3), "Display Power");
+	gpio_direction_output(S3C2410_GPB(3), 1);
+
+	gpio_request(S3C2410_GPB(1), "Display Reset");
+	gpio_direction_output(S3C2410_GPB(1), 1);
+
+	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2416_map_io,
+	.init_machine	= smdk2416_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
new file mode 100644
index 0000000..35dabcc
--- /dev/null
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2416/s3c2416.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * Samsung S3C2416 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/reset.h>
+#include <mach/idle.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2416.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/iic-core.h>
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2416_sysclass = {
+	.name = "s3c2416-core",
+};
+
+static struct sys_device s3c2416_sysdev = {
+	.cls		= &s3c2416_sysclass,
+};
+
+static void s3c2416_hard_reset(void)
+{
+	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2416_init(void)
+{
+	printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+	s3c24xx_reset_hook = s3c2416_hard_reset;
+	/* s3c24xx_idle = s3c2416_idle;	*/
+
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_fb.name = "s3c2443-fb";
+
+	return sysdev_register(&s3c2416_sysdev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+	s3c_device_nand.name = "s3c2416-nand";
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+
+	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+	return sysdev_class_register(&s3c2416_sysclass);
+}
+
+core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..cd8e7de 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -6,6 +6,7 @@ config CPU_S3C2440
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2410_GPIO
@@ -15,14 +16,67 @@ config CPU_S3C2440
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	select CPU_LLSERIAL_S3C2440
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C2440_DMA
 	bool
 	depends on ARCH_S3C2410 && CPU_S3C24405B
 	help
 	  Support for S3C2440 specific DMA code5A
 
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
@@ -37,6 +91,18 @@ config MACH_ANUBIS
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
 
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select CPU_S3C2442
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
@@ -94,11 +160,14 @@ config MACH_NEXCODER_2440
 
 config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	select CPU_S3C2442
+
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
@@ -119,4 +188,17 @@ config MACH_MINI2440
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
 
+config MACH_RX1950
+	bool "HP iPAQ rx1950"
+	select CPU_S3C2442
+	select S3C24XX_DCLK
+	select PM_H1940 if PM
+	select I2C
+	select S3C2410_PWM
+	select S3C_DEV_NAND
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_16934400
+	help
+	   Say Y here if you're using HP iPAQ rx1950
+
 endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..d5440fa 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,10 +10,20 @@ obj-n				:=
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+
 obj-$(CONFIG_CPU_S3C2440)	+= irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= clock.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma.o
 
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
@@ -23,6 +33,8 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
 
 # extra machine support
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index d1c29b2..3dc2426 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -98,8 +98,10 @@ static struct clk s3c2440_clk_cam = {
 static struct clk s3c2440_clk_cam_upll = {
 	.name		= "camif-upll",
 	.id		= -1,
-	.set_rate	= s3c2440_camif_upll_setrate,
-	.round_rate	= s3c2440_camif_upll_round,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2440_camif_upll_setrate,
+		.round_rate	= s3c2440_camif_upll_round,
+	},
 };
 
 static struct clk s3c2440_clk_ac97 = {
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index e08e081..3b0529f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,7 +20,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
index 953331d..953331d 100644
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 62a4c3e..b73f78a 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -409,7 +409,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index aa69290..8472579 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -165,7 +165,7 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
 	.gpio_detect	= S3C2410_GPG(10),
 };
 
@@ -203,7 +203,7 @@ static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
 };
 
 static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c0,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
-
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
@@ -226,6 +224,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
 	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
new file mode 100644
index 0000000..9e39faa
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -0,0 +1,589 @@
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
+ *
+ * Copyright (C) 2006-2009 by Openmoko, Inc.
+ * Authors: Harald Welte <laforge@openmoko.org>
+ *          Andy Green <andy@openmoko.org>
+ *          Werner Almesberger <werner@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
+#include <plat/usb-control.h>
+#include <mach/regs-mem.h>
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+static struct pcf50633 *gta02_pcf;
+
+/*
+ * This gets called every 1ms when we paniced.
+ */
+
+static long gta02_panic_blink(long count)
+{
+	long delay = 0;
+	static long last_blink;
+	static char led;
+
+	/* Fast blink: 200ms period. */
+	if (count - last_blink < 100)
+		return 0;
+
+	led ^= 1;
+	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
+
+	last_blink = count;
+
+	return delay;
+}
+
+
+static struct map_desc gta02_iodesc[] __initdata = {
+	{
+		.virtual	= 0xe0000000,
+		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
+	},
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+/*
+ * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
+ * We use this to recognize that we can pull 1A from the USB socket.
+ *
+ * These constants are the measured pcf50633 ADC levels with the 1A
+ * charger / 48K resistor, and with no pulldown resistor.
+ */
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+	int  ma;
+
+	/* Interpret charger type */
+	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+		/*
+		 * Sanity - stop GPO driving out now that we have a 1A charger
+		 * GPO controls USB Host power generation on GTA02
+		 */
+		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+		ma = 1000;
+	} else
+		ma = 100;
+
+	pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+	if (gta02_usb_vbus_draw) {
+		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
+		return;
+	}
+
+#ifdef CONFIG_PCF50633_ADC
+	pcf50633_adc_async_read(gta02_pcf,
+				PCF50633_ADCC1_MUX_ADCIN1,
+				PCF50633_ADCC1_AVERAGE_16,
+				gta02_configure_pmu_for_charger,
+				NULL);
+#else
+	/*
+	 * If the PCF50633 ADC is disabled we fallback to a
+	 * 100mA limit for safety.
+	 */
+	pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+	if (irq == PCF50633_IRQ_USBINS) {
+		schedule_delayed_work(&gta02_charger_work,
+				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+
+		return;
+	}
+
+	if (irq == PCF50633_IRQ_USBREM) {
+		cancel_delayed_work_sync(&gta02_charger_work);
+		gta02_usb_vbus_draw = 0;
+	}
+}
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+	if (!gta02_pcf)
+		return;
+
+	gta02_usb_vbus_draw = ma;
+
+	schedule_delayed_work(&gta02_charger_work,
+			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+#else /* !CONFIG_CHARGER_PCF50633 */
+#define gta02_pmu_event_callback	NULL
+#define gta02_udc_vbus_draw		NULL
+#endif
+
+/*
+ * This is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+
+
+static char *gta02_batteries[] = {
+	"battery",
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+	.default_brightness = 0x3f,
+	.default_brightness_limit = 0,
+	.ramp_time = 5,
+};
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+	.resumers = {
+		[0] =	PCF50633_INT1_USBINS |
+			PCF50633_INT1_USBREM |
+			PCF50633_INT1_ALARM,
+		[1] =	PCF50633_INT2_ONKEYF,
+		[2] =	PCF50633_INT3_ONKEY1S,
+		[3] =	PCF50633_INT4_LOWSYS |
+			PCF50633_INT4_LOWBAT |
+			PCF50633_INT4_HIGHTMP,
+	},
+
+	.batteries = gta02_batteries,
+	.num_batteries = ARRAY_SIZE(gta02_batteries),
+
+	.charger_reference_current_ma = 1000,
+
+	.backlight_data = &gta02_backlight_data,
+
+	.reg_init_data = {
+		[PCF50633_REGULATOR_AUTO] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_DOWN1] = {
+			.constraints = {
+				.min_uV = 1300000,
+				.max_uV = 1600000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_DOWN2] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.always_on = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_HCLDO] = {
+			.constraints = {
+				.min_uV = 2000000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+				.always_on = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO1] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 0,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_LDO2] = {
+			.constraints = {
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO3] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO4] = {
+			.constraints = {
+				.min_uV = 3200000,
+				.max_uV = 3200000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+		},
+		[PCF50633_REGULATOR_LDO5] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+		[PCF50633_REGULATOR_LDO6] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+		},
+		[PCF50633_REGULATOR_MEMLDO] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+		},
+
+	},
+	.probe_done = gta02_pmu_attach_child_devices,
+	.mbc_event_callback = gta02_pmu_event_callback,
+};
+
+
+/* NOR Flash. */
+
+#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
+#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+	.width		= 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+	.start		= GTA02_FLASH_BASE,
+	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &gta02_nor_flash_data,
+	},
+	.resource	= &gta02_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+	.name		= "s3c24xx_pwm",
+	.num_resources	= 0,
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf50633", 0x73),
+		.irq = GTA02_IRQ_PCF50633,
+		.platform_data = &gta02_pcf_pdata,
+	},
+	{
+		I2C_BOARD_INFO("wm8753", 0x1a),
+	},
+};
+
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
+	[0] = {
+		/*
+		 * This name is also hard-coded in the boot loaders, so
+		 * changing it would would require all users to upgrade
+		 * their boot loaders, some of which are stored in a NOR
+		 * that is considered to be immutable.
+		 */
+		.name		= "neo1973-nand",
+		.nr_chips	= 1,
+		.flash_bbt	= 1,
+	},
+};
+
+/*
+ * Choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory).
+ */
+
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+	.sets		= gta02_nand_sets,
+};
+
+
+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
+		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
+		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
+		/* FIXME: Do something here. */
+	}
+}
+
+/* Get PMU to set USB current limit accordingly. */
+static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+	.vbus_draw	= gta02_udc_vbus_draw,
+	.udc_command	= gta02_udc_command,
+
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info __initdata = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
+
+
+static void __init gta02_map_io(void)
+{
+	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+
+/* These are the guys that don't need to be children of PMU. */
+
+static struct platform_device *gta02_devices[] __initdata = {
+	&s3c_device_ohci,
+	&s3c_device_wdt,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&s3c_device_nand,
+	&gta02_nor_flash,
+	&s3c24xx_pwm_device,
+	&s3c_device_iis,
+	&s3c_device_i2c0,
+};
+
+/* These guys DO need to be children of PMU. */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+};
+
+
+/*
+ * This is called when pc50633 is probed, quite late in the day since it is an
+ * I2C bus device.  Here we can define platform devices with the advantage that
+ * we can mark the pcf50633 as the parent.  This makes them get suspended and
+ * resumed with their parent the pcf50633 still around.  All devices whose
+ * operation depends on something from pcf50633 must have this relationship
+ * made explicit like this, or suspend and resume will become an unreliable
+ * hellworld.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+	int n;
+
+	/* Grab a copy of the now probed PMU pointer. */
+	gta02_pcf = pcf;
+
+	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+	platform_add_devices(gta02_devices_pmu_children,
+			     ARRAY_SIZE(gta02_devices_pmu_children));
+}
+
+static void gta02_poweroff(void)
+{
+	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
+}
+
+static void __init gta02_machine_init(void)
+{
+	/* Set the panic callback to make AUX LED blink at ~5Hz. */
+	panic_blink = gta02_panic_blink;
+
+	s3c_pm_init();
+
+#ifdef CONFIG_CHARGER_PCF50633
+	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+#endif
+
+	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_ohci_set_platdata(&gta02_usb_info);
+	s3c_nand_set_platdata(&gta02_nand_info);
+	s3c_i2c0_set_platdata(NULL);
+
+	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+
+	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+	pm_power_off = gta02_poweroff;
+}
+
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= gta02_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= gta02_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 2068e90..a76bcda 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -53,6 +53,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -102,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 	switch (cmd) {
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+			gpio_set_value(S3C2410_GPC(5), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+			gpio_set_value(S3C2410_GPC(5), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -506,9 +507,8 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_wdt,
-/*	&s3c_device_adc,*/ /* ADC doesn't like living with touchscreen ! */
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
@@ -522,8 +522,6 @@ static struct platform_device *mini2440_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_iis,
 	&mini2440_audio,
-/*	&s3c_device_timer[0],*/	/* buzzer pwm, no API for it */
-	/* remaining devices are optional */
 };
 
 static void __init mini2440_map_io(void)
@@ -531,8 +529,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-
-	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
 /*
@@ -637,25 +633,25 @@ static void __init mini2440_init(void)
 	mini2440_parse_features(&features, mini2440_features_str);
 
 	/* turn LCD on */
-	s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
 
 	/* Turn the backlight early on */
-	s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+	gpio_direction_output(S3C2410_GPG(4), 1);
 
 	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
 	/* Make sure the D+ pullup pin is output */
-	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
+	gpio_direction_output(S3C2410_GPC(5), 0);
 
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
-		s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
-					S3C2410_GPIO_INPUT);
+		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
 	}
 	if (features.lcd_index != -1) {
 		int li;
@@ -678,6 +674,7 @@ static void __init mini2440_init(void)
 	}
 
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
 	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d43eded..3ff62de 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -40,8 +40,9 @@
 #include <plat/regs-serial.h>
 #include <plat/iic.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,7 +107,7 @@ static struct platform_device nexcoder_device_nor = {
 /* Standard Nexcoder devices */
 
 static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -122,15 +123,15 @@ static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
 	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
 	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
 	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+	s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index f35371d..319458d 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -49,6 +49,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -298,7 +299,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 
 	/* ensure that an nRESET is not generated on resume. */
 	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -310,7 +311,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
new file mode 100644
index 0000000..8603b57
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -0,0 +1,582 @@
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/sysdev.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
+	[0] = {
+	       .name = "fclk",
+	       .divisor = 0x0a,
+	       .min_baud = 0,
+	       .max_baud = 0,
+	},
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+	[0] = {
+	       .hwport = 0,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+	[1] = {
+	       .hwport = 1,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+	/* IR port */
+	[2] = {
+	       .hwport = 2,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x43,
+	       .ufcon = 0xf1,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+};
+
+static struct s3c2410fb_display rx1950_display = {
+	.type = S3C2410_LCDCON1_TFT,
+	.width = 240,
+	.height = 320,
+	.xres = 240,
+	.yres = 320,
+	.bpp = 16,
+
+	.pixclock = 260000,
+	.left_margin = 10,
+	.right_margin = 20,
+	.hsync_len = 10,
+	.upper_margin = 2,
+	.lower_margin = 2,
+	.vsync_len = 2,
+
+	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVCLK |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_HWSWP |
+			   (0x02 << 13) |
+			   (0x02 << 15),
+
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+	.displays = &rx1950_display,
+	.num_displays = 1,
+	.default_display = 0,
+
+	.lpcsel = 0x02,
+	.gpccon = 0xaa9556a9,
+	.gpccon_mask = 0xffc003fc,
+	.gpcup = 0x0000ffff,
+	.gpcup_mask = 0xffffffff,
+
+	.gpdcon = 0xaa90aaa1,
+	.gpdcon_mask = 0xffc0fff0,
+	.gpdup = 0x0000fcfd,
+	.gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+void rx1950_lcd_power(int enable)
+{
+	int i;
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+
+		/* GPC11-GPC15->OUTPUT */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 1);
+
+		/* Wait a bit here... */
+		mdelay(100);
+
+		/* GPD2-GPD7->OUTPUT */
+		/* GPD11-GPD15->OUTPUT */
+		/* GPD2-GPD7->1, GPD11-GPD15->1 */
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+
+		/* Wait a bit here...*/
+		mdelay(100);
+
+		/* GPB0->OUTPUT, GPB0->0 */
+		gpio_direction_output(S3C2410_GPB(0), 0);
+
+		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+		for (i = 1; i < 5; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPC15-GPC11->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPD15-GPD11->0, GPD2->GPD7->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		/* GPC6->0, GPC7->0, GPC5->0 */
+		gpio_direction_output(S3C2410_GPC(6), 0);
+		gpio_direction_output(S3C2410_GPC(7), 0);
+		gpio_direction_output(S3C2410_GPC(5), 0);
+
+		/* GPB1->OUTPUT, GPB1->0 */
+		gpio_direction_output(S3C2410_GPB(1), 0);
+		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+		pwm_disable(lcd_pwm);
+
+		/* GPC0->0, GPC10->0 */
+		gpio_direction_output(S3C2410_GPC(0), 0);
+		gpio_direction_output(S3C2410_GPC(10), 0);
+	} else {
+		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+		pwm_enable(lcd_pwm);
+
+		gpio_direction_output(S3C2410_GPC(0), 1);
+		gpio_direction_output(S3C2410_GPC(5), 1);
+
+		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+		gpio_direction_output(S3C2410_GPC(7), 1);
+
+		for (i = 1; i < 5; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 2; i < 8; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		gpio_direction_output(S3C2410_GPC(10), 1);
+		gpio_direction_output(S3C2410_GPC(6), 1);
+	}
+	enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+			gpio_direction_output(S3C2410_GPB(0), 0);
+	} else {
+			/* LED driver need a "push" to power on */
+			gpio_direction_output(S3C2410_GPB(0), 1);
+			/* Warm up backlight for one period of PWM.
+			 * Without this trick its almost impossible to
+			 * enable backlight with low brightness value
+			 */
+			ndelay(48000);
+			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	}
+	enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+	lcd_pwm = pwm_request(1, "RX1950 LCD");
+	if (IS_ERR(lcd_pwm)) {
+		dev_err(dev, "Unable to request PWM for LCD power!\n");
+		return PTR_ERR(lcd_pwm);
+	}
+
+	rx1950_lcd_power(1);
+	rx1950_bl_power(1);
+
+	return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+	rx1950_bl_power(0);
+	rx1950_lcd_power(0);
+
+	pwm_free(lcd_pwm);
+	gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+	if (!brightness) {
+		rx1950_bl_power(0);
+		rx1950_lcd_power(0);
+	} else {
+		rx1950_lcd_power(1);
+		rx1950_bl_power(1);
+	}
+	return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+	.pwm_id = 0,
+	.max_brightness = 24,
+	.dft_brightness = 4,
+	.pwm_period_ns = 48000,
+	.init = rx1950_backlight_init,
+	.notify = rx1950_backlight_notify,
+	.exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+	.name = "pwm-backlight",
+	.dev = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &rx1950_backlight_data,
+	},
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_direction_output(S3C2410_GPJ(1), 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_direction_output(S3C2410_GPJ(1), 1);
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+	.gpio_detect = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power = rx1950_set_mmc_power,
+	.ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+	[0] = {
+			.name = "Boot0",
+			.offset = 0,
+			.size = 0x4000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+			.name = "Boot1",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x40000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[2] = {
+			.name = "Kernel",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x300000,
+			.mask_flags = 0,
+	},
+	[3] = {
+			.name = "Filesystem",
+			.offset = MTDPART_OFS_APPEND,
+			.size = MTDPART_SIZ_FULL,
+			.mask_flags = 0,
+	},
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+	[0] = {
+			.name = "Internal",
+			.nr_chips = 1,
+			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+			.partitions = rx1950_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+	.tacls = 25,
+	.twrph0 = 50,
+	.twrph1 = 15,
+	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+	.sets = rx1950_nand_sets,
+};
+
+static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		gpio_direction_output(S3C2410_GPJ(5), 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		gpio_direction_output(S3C2410_GPJ(5), 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+	.udc_command = rx1950_udc_pullup,
+	.vbus_pin = S3C2410_GPG(5),
+	.vbus_pin_inverted = 1,
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+	.delay = 10000,
+	.presc = 49,
+	.oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= S3C2410_GPF(0),
+		.active_low	= 1,
+		.desc		= "Power button",
+		.wakeup		= 1,
+	},
+	{
+		.code		= KEY_F5,
+		.gpio		= S3C2410_GPF(7),
+		.active_low	= 1,
+		.desc		= "Record button",
+	},
+	{
+		.code		= KEY_F1,
+		.gpio		= S3C2410_GPG(0),
+		.active_low	= 1,
+		.desc		= "Calendar button",
+	},
+	{
+		.code		= KEY_F2,
+		.gpio		= S3C2410_GPG(2),
+		.active_low	= 1,
+		.desc		= "Contacts button",
+	},
+	{
+		.code		= KEY_F3,
+		.gpio		= S3C2410_GPG(3),
+		.active_low	= 1,
+		.desc		= "Mail button",
+	},
+	{
+		.code		= KEY_F4,
+		.gpio		= S3C2410_GPG(7),
+		.active_low	= 1,
+		.desc		= "WLAN button",
+	},
+	{
+		.code		= KEY_LEFT,
+		.gpio		= S3C2410_GPG(10),
+		.active_low	= 1,
+		.desc		= "Left button",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= S3C2410_GPG(11),
+		.active_low	= 1,
+		.desc		= "Right button",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= S3C2410_GPG(4),
+		.active_low	= 1,
+		.desc		= "Up button",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= S3C2410_GPG(6),
+		.active_low	= 1,
+		.desc		= "Down button",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= S3C2410_GPG(9),
+		.active_low	= 1,
+		.desc		= "Ok button"
+	},
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+	.buttons = rx1950_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct s3c2410_platform_i2c rx1950_i2c_data = {
+	.flags = 0,
+	.slave_addr = 0x42,
+	.frequency = 400 * 1000,
+	.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_timer[0],
+	&s3c_device_timer[1],
+	&rx1950_backlight,
+	&rx1950_device_gpiokeys,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+	&s3c24xx_clkout0,
+	&s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+	s3c24xx_clkout0.parent  = &clk_h;
+	s3c24xx_clkout1.parent  = &clk_f;
+
+	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+	s3c24xx_init_clocks(16934000);
+	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+	/* setup PM */
+
+#ifdef CONFIG_PM_H1940
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+	s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+	int i;
+
+	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+	s3c_i2c0_set_platdata(&rx1950_i2c_data);
+	s3c_nand_set_platdata(&rx1950_nand_info);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+						S3C2410_MISCCR_USBSUSPND0 |
+						S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
+	gpio_direction_output(S3C2410_GPJ(5), 0);
+
+	/* mmc power is disabled by default */
+	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+	gpio_direction_output(S3C2410_GPJ(1), 0);
+
+	for (i = 0; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 10; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 2; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	for (i = 11; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+    /* Maintainers: Vasily Khoruzhick */
+    .phys_io = S3C2410_PA_UART,
+	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params = S3C2410_SDRAM_PA + 0x100,
+	.map_io = rx1950_map_io,
+	.init_irq = s3c24xx_init_irq,
+	.init_machine = rx1950_init_machine,
+	.timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index a952a13..d2946de 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -176,7 +176,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -209,7 +209,7 @@ static void __init rx3715_init_machine(void)
 }
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index ec13e74..df83276 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -150,7 +150,7 @@ static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
 };
 
 static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -174,7 +174,7 @@ static void __init smdk2440_machine_init(void)
 }
 
 MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index 976002f..976002f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
new file mode 100644
index 0000000..f105d5e
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006-2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
new file mode 100644
index 0000000..c8a8f90
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..d50f3ae 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -29,9 +30,13 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/s3c2440.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
@@ -41,6 +46,9 @@ int __init s3c2440_init(void)
 {
 	printk("S3C2440: Initialising architecture\n");
 
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+
 	/* change irq for watchdog */
 
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
new file mode 100644
index 0000000..188ad1e
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -0,0 +1,165 @@
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2442 core and lock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* S3C2442 extended clock support */
+
+static unsigned long s3c2442_camif_upll_round(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	div = parent_rate / rate;
+
+	if (div == 3)
+		return parent_rate / 3;
+
+	/* note, we remove the +/- 1 calculations for the divisor */
+
+	div /= 2;
+
+	if (div < 1)
+		div = 1;
+	else if (div > 16)
+		div = 16;
+
+	return parent_rate / (div * 2);
+}
+
+static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
+
+	rate = s3c2442_camif_upll_round(clk, rate);
+
+	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
+
+	if (rate == parent_rate) {
+		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
+	} else if ((parent_rate / rate) == 3) {
+		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
+	} else {
+		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
+		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+		camdivn |= (((parent_rate / rate) / 2) - 1);
+	}
+
+	__raw_writel(camdivn, S3C2440_CAMDIVN);
+
+	return 0;
+}
+
+/* Extra S3C2442 clocks */
+
+static struct clk s3c2442_clk_cam = {
+	.name		= "camif",
+	.id		= -1,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2442_clk_cam_upll = {
+	.name		= "camif-upll",
+	.id		= -1,
+	.ops		= &(struct clk_ops) {
+		.set_rate	= s3c2442_camif_upll_setrate,
+		.round_rate	= s3c2442_camif_upll_round,
+	},
+};
+
+static int s3c2442_clk_add(struct sys_device *sysdev)
+{
+	struct clk *clock_upll;
+	struct clk *clock_h;
+	struct clk *clock_p;
+
+	clock_p = clk_get(NULL, "pclk");
+	clock_h = clk_get(NULL, "hclk");
+	clock_upll = clk_get(NULL, "upll");
+
+	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
+		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
+		return -EINVAL;
+	}
+
+	s3c2442_clk_cam.parent = clock_h;
+	s3c2442_clk_cam_upll.parent = clock_upll;
+
+	s3c24xx_register_clock(&s3c2442_clk_cam);
+	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
+
+	clk_disable(&s3c2442_clk_cam);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2442_clk_driver = {
+	.add	= s3c2442_clk_add,
+};
+
+static __init int s3c2442_clk_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+	.cls		= &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+	return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
new file mode 100644
index 0000000..f8d9613
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -0,0 +1,138 @@
+/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
+ *
+ * Copyright (c) 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long camdivn;
+	unsigned long dvs;
+
+	if (parent == &clk_f)
+		dvs = 0;
+	else if (parent == &clk_h)
+		dvs = S3C2440_CAMDIVN_DVSEN;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	camdivn  = __raw_readl(S3C2440_CAMDIVN);
+	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
+	camdivn |= dvs;
+	__raw_writel(camdivn, S3C2440_CAMDIVN);
+
+	return 0;
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2440_setparent_armclk,
+	},
+};
+
+static int s3c244x_clk_add(struct sys_device *sysdev)
+{
+	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+	unsigned long clkdivn;
+	struct clk *clock_upll;
+	int ret;
+
+	printk("S3C244X: Clock Support, DVS %s\n",
+	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
+
+	ret = s3c24xx_register_clock(&clk_arm);
+	if (ret < 0) {
+		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
+		return ret;
+	}
+
+	clock_upll = clk_get(NULL, "upll");
+	if (IS_ERR(clock_upll)) {
+		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
+		return -ENOENT;
+	}
+
+	/* check rate of UPLL, and if it is near 96MHz, then change
+	 * to using half the UPLL rate for the system */
+
+	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+		spin_lock(&clocks_lock);
+
+		clkdivn = __raw_readl(S3C2410_CLKDIVN);
+		clkdivn |= S3C2440_CLKDIVN_UCLK;
+		__raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+		spin_unlock(&clocks_lock);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+	.add		= s3c244x_clk_add,
+};
+
+static int s3c2440_clk_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c2440_clk_init);
+
+static struct sysdev_driver s3c2442_clk_driver = {
+	.add		= s3c244x_clk_add,
+};
+
+static int s3c2442_clk_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index a75c0c2..a75c0c2 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
new file mode 100644
index 0000000..5e4a97e
--- /dev/null
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -0,0 +1,195 @@
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
+ *
+ * Copyright (c) 2004-2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <mach/regs-clock.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
+
+#include <plat/s3c2410.h>
+#include <plat/s3c244x.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/pll.h>
+
+static struct map_desc s3c244x_iodesc[] __initdata = {
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(WATCHDOG),
+};
+
+/* uart initialisation */
+
+void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+void __init s3c244x_map_io(void)
+{
+	/* register our io-tables */
+
+	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
+
+	/* rename any peripherals used differing from the s3c2410 */
+
+	s3c_device_sdi.name  = "s3c2440-sdi";
+	s3c_device_i2c0.name  = "s3c2440-i2c";
+	s3c_device_nand.name = "s3c2440-nand";
+	s3c_device_ts.name = "s3c2440-ts";
+	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+}
+
+void __init_or_cpufreq s3c244x_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long clkdiv;
+	unsigned long camdiv;
+	unsigned long xtal;
+	unsigned long hclk, fclk, pclk;
+	int hdiv = 1;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	/* work out clock scalings */
+
+	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
+	case S3C2440_CLKDIVN_HDIVN_1:
+		hdiv = 1;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_2:
+		hdiv = 2;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_4_8:
+		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
+		break;
+
+	case S3C2440_CLKDIVN_HDIVN_3_6:
+		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
+		break;
+	}
+
+	hclk = fclk / hdiv;
+	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
+
+	/* print brief summary of clocks, etc */
+
+	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
+	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
+
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+}
+
+void __init s3c244x_init_clocks(int xtal)
+{
+	/* initialise the clocks here, to allow other things like the
+	 * console to use them, and to add new ones after the initialisation
+	 */
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c244x_setup_clocks();
+	s3c2410_baseclk_add();
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save s3c244x_sleep[] = {
+	SAVE_ITEM(S3C2440_DSC0),
+	SAVE_ITEM(S3C2440_DSC1),
+	SAVE_ITEM(S3C2440_GPJDAT),
+	SAVE_ITEM(S3C2440_GPJCON),
+	SAVE_ITEM(S3C2440_GPJUP)
+};
+
+static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
+{
+	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+static int s3c244x_resume(struct sys_device *dev)
+{
+	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
+	return 0;
+}
+
+#else
+#define s3c244x_suspend NULL
+#define s3c244x_resume  NULL
+#endif
+
+/* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
+
+struct sysdev_class s3c2440_sysclass = {
+	.name		= "s3c2440-core",
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume
+};
+
+struct sysdev_class s3c2442_sysclass = {
+	.name		= "s3c2442-core",
+	.suspend	= s3c244x_suspend,
+	.resume		= s3c244x_resume
+};
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2440 based system)
+ * as a driver which may support both 2410 and 2440 may try and use it.
+*/
+
+static int __init s3c2440_core_init(void)
+{
+	return sysdev_class_register(&s3c2440_sysclass);
+}
+
+core_initcall(s3c2440_core_init);
+
+static int __init s3c2442_core_init(void)
+{
+	return sysdev_class_register(&s3c2442_sysclass);
+}
+
+core_initcall(s3c2442_core_init);
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 8d38118..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 2a19113..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
deleted file mode 100644
index ea1aa1f..0000000
--- a/arch/arm/mach-s3c2442/clock.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.set_rate	= s3c2442_camif_upll_setrate,
-	.round_rate	= s3c2442_camif_upll_round,
-};
-
-static int s3c2442_clk_add(struct sys_device *sysdev)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2442_clk_driver = {
-	.add	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
deleted file mode 100644
index 0b4a3a0..0000000
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
- *
- * Copyright (C) 2006-2009 by Openmoko, Inc.
- * Authors: Harald Welte <laforge@openmoko.org>
- *          Andy Green <andy@openmoko.org>
- *          Werner Almesberger <werner@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-
-#include <mach/spi.h>
-#include <mach/spi-gpio.h>
-#include <plat/usb-control.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called every 1ms when we paniced.
- */
-
-static long gta02_panic_blink(long count)
-{
-	long delay = 0;
-	static long last_blink;
-	static char led;
-
-	/* Fast blink: 200ms period. */
-	if (count - last_blink < 100)
-		return 0;
-
-	led ^= 1;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	last_blink = count;
-
-	return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 0,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-		},
-
-	},
-	.probe_done = gta02_pmu_attach_child_devices,
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-};
-
-
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
-		gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
-		/* FIXME: Do something here. */
-	}
-}
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.udc_command	= gta02_udc_command,
-
-};
-
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
-	/* We map 8-bit intensity to 6-bit intensity in hardware. */
-	intensity >>= 2;
-
-	/*
-	 * This can happen during, eg, print of panic on blanked console,
-	 * but we can't service i2c without interrupts active, so abort.
-	 */
-	if (in_atomic()) {
-		printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
-		return;
-	}
-
-	old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-	if (intensity == old_intensity)
-		return;
-
-	/* We can't do this anywhere else. */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
-	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-		old_intensity = 0;
-
-	/*
-	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-	 * if seen, you have to re-enable the LED unit.
-	 */
-	if (!intensity || !old_intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
-	/* Illegal to set LEDOUT to 0. */
-	if (!intensity)
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
-	else
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-					  intensity);
-
-	if (intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
-	.name			= "gta02-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data = &gta02_bl_info,
-	},
-};
-
-
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&s3c_device_i2c0,
-};
-
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-	&gta02_bl_dev,
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device.  Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent.  This makes them get suspended and
- * resumed with their parent the pcf50633 still around.  All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	/* Grab a copy of the now probed PMU pointer. */
-	gta02_pcf = pcf;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	platform_add_devices(gta02_devices_pmu_children,
-			     ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to make AUX LED blink at ~5Hz. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-}
-
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
deleted file mode 100644
index 4663bdc..0000000
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include <plat/s3c2442.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2442_sysdev = {
-	.cls		= &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-	return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4314c44..4fef723 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -7,6 +7,8 @@ config CPU_S3C2443
 	depends on ARCH_S3C2410
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 2785d69..0c3c0c8 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2443/clock.c
  *
- * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2443 Clock control support
@@ -21,6 +21,7 @@
 */
 
 #include <linux/init.h>
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -42,6 +43,7 @@
 
 #include <plat/s3c2443.h>
 #include <plat/clock.h>
+#include <plat/clock-clksrc.h>
 #include <plat/cpu.h>
 
 /* We currently have to assume that the system is running
@@ -53,297 +55,118 @@
  * set the correct muxing at initialisation
 */
 
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_HCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_HCLKCON);
-
-	return 0;
-}
-
-static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_PCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_PCLKCON);
-
-	return 0;
-}
-
-static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2443_SCLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2443_SCLKCON);
-
-	return 0;
-}
-
-static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate,
-					      unsigned int max)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > max)
-		div = max;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
-					       unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 4);
-}
-
-static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
-						unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 16);
-}
-
-static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
-						 unsigned long rate)
-{
-	return s3c2443_roundrate_clksrc(clk, rate, 256);
-}
-
 /* clock selections */
 
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-	.id		= -1,
-};
-
-#if 0
-static struct clk clk_mpll = {
-	.name		= "mpll",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-};
-#endif
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
 };
 
-static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+/* armdiv
+ *
+ * this clock is sourced from msysclk and can have a number of
+ * divider values applied to it to then be fed into armclk.
+*/
 
-	clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
+/* armdiv divisor table */
 
-	if (parent == &clk_xtal)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
+static unsigned int armdiv[16] = {
+	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
+	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
+	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
+	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
+	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
+	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
+	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
+	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+};
 
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
 
-	return 0;
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
 }
 
-static struct clk clk_epllref = {
-	.name		= "epllref",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_epllref,
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
+					      unsigned long rate)
 {
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned best = 256; /* bigger than any value */
+	unsigned div;
+	int ptr;
 
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best)
+			best = div;
+	}
 
-	return parent_rate / (div + 1);
+	return parent / best;
 }
 
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-	.get_rate	= s3c2443_getrate_mdivclk,
-};
-
-static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
+static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 {
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
-		    S3C2443_CLKSRC_EXTCLK_DIV);
+	unsigned long parent = clk_get_rate(clk->parent);
+	unsigned long calc;
+	unsigned div;
+	unsigned best = 256; /* bigger than any value */
+	int ptr;
+	int val = -1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
+		div = armdiv[ptr];
+		calc = parent / div;
+		if (calc <= rate && div < best) {
+			best = div;
+			val = ptr;
+		}
+	}
 
-	if (parent == &clk_mpll)
-		clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mdivclk)
-		clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
-	else if (parent != &clk_mpllref)
-		return -EINVAL;
+	if (val >= 0) {
+		unsigned long clkcon0;
 
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
+		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
+		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+		__raw_writel(clkcon0, S3C2443_CLKDIV0);
+	}
 
-	return 0;
+	return (val == -1) ? -EINVAL : 0;
 }
 
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.parent		= &clk_xtal,
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_msysclk,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
 static struct clk clk_armdiv = {
 	.name		= "armdiv",
 	.id		= -1,
-	.parent		= &clk_msysclk,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.round_rate = s3c2443_armclk_roundrate,
+		.set_rate = s3c2443_armclk_setrate,
+	},
 };
 
 /* armclk
  *
- * this is the clock fed into the ARM core itself, either from
- * armdiv or from hclk.
+ * this is the clock fed into the ARM core itself, from armdiv or from hclk.
  */
 
-static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clkdiv0;
-
-	clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	if (parent == &clk_armdiv)
-		clkdiv0 &= ~S3C2443_CLKDIV0_DVS;
-	else if (parent == &clk_h)
-		clkdiv0 |= S3C2443_CLKDIV0_DVS;
-	else
-		return -EINVAL;
-
-	__raw_writel(clkdiv0, S3C2443_CLKDIV0);
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_armclk,
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else if (parent == &clk_epllref)
-		clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
-	else
-		return -EINVAL;
-
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static struct clk clk_esysclk = {
-	.name		= "esysclk",
-	.parent		= &clk_epll,
-	.id		= -1,
-	.set_parent	= s3c2443_setparent_esysclk,
+static struct clk *clk_arm_sources[] = {
+	[0] = &clk_armdiv,
+	[1] = &clk_h,
 };
 
-/* uartclk
- *
- * UART baud-rate clock sourced from esysclk via a divisor
-*/
-
-static unsigned long s3c2443_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_UARTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_uart,
-	.set_rate	= s3c2443_setrate_uart,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_arm = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_arm_sources,
+		.nr_sources = ARRAY_SIZE(clk_arm_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
 };
 
 /* hsspi
@@ -351,85 +174,17 @@ static struct clk clk_uart = {
  * high-speed spi clock, sourced from esysclk
 */
 
-static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-
-static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsspi = {
-	.name		= "hsspi",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_hsspi,
-	.set_rate	= s3c2443_setrate_hsspi,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsspi = {
+	.clk	= {
+		.name		= "hsspi",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host-parent",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_usbhost,
-	.set_rate	= s3c2443_setrate_usbhost,
-	.round_rate	= s3c2443_roundrate_clksrc4,
-};
 
 /* clk_hsmcc_div
  *
@@ -438,39 +193,13 @@ static struct clk clk_usb_bus_host = {
  * be fed to the hsmmc block
 */
 
-static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc4(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_hsmmc_div = {
-	.name		= "hsmmc-div",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_hsmmc_div,
-	.set_rate	= s3c2443_setrate_hsmmc_div,
-	.round_rate	= s3c2443_roundrate_clksrc4,
+static struct clksrc_clk clk_hsmmc_div = {
+	.clk	= {
+		.name		= "hsmmc-div",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
 };
 
 static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
@@ -503,217 +232,67 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
 static struct clk clk_hsmmc = {
 	.name		= "hsmmc-if",
 	.id		= -1,
-	.parent		= &clk_hsmmc_div,
+	.parent		= &clk_hsmmc_div.clk,
 	.enable		= s3c2443_enable_hsmmc,
-	.set_parent	= s3c2443_setparent_hsmmc,
+	.ops		= &(struct clk_ops) {
+		.set_parent	= s3c2443_setparent_hsmmc,
+	},
 };
 
 /* i2s_eplldiv
  *
- * this clock is the output from the i2s divisor of esysclk
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
+ * from the mux that comes after it (cannot merge into one single clock)
 */
 
-static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_I2SDIV_MASK;
-	div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_i2s_eplldiv = {
-	.name		= "i2s-eplldiv",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.get_rate	= s3c2443_getrate_i2s_eplldiv,
-	.set_rate	= s3c2443_setrate_i2s_eplldiv,
-	.round_rate	= s3c2443_roundrate_clksrc16,
+static struct clksrc_clk clk_i2s_eplldiv = {
+	.clk	= {
+		.name		= "i2s-eplldiv",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
 };
 
 /* i2s-ref
  *
  * i2s bus reference clock, selectable from external, esysclk or epllref
-*/
-
-static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-
-	clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
-
-	if (parent == &clk_epllref)
-		clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
-	else if (parent == &clk_i2s_ext)
-		clksrc |= S3C2443_CLKSRC_I2S_EXT;
-	else if (parent != &clk_i2s_eplldiv)
-		return -EINVAL;
-
-	clk->parent = parent;
-	__raw_writel(clksrc, S3C2443_CLKSRC);
-
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2s-if",
-	.id		= -1,
-	.parent		= &clk_i2s_eplldiv,
-	.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.set_parent	= s3c2443_setparent_i2s,
-};
-
-/* cam-if
- *
- * camera interface bus-clock, divided down from esysclk
-*/
-
-static unsigned long s3c2443_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
-	div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc16(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
-	clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
-
-	__raw_writel(clkdiv1, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",		/* same as 2440 name */
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_cam,
-	.set_rate	= s3c2443_setrate_cam,
-	.round_rate	= s3c2443_roundrate_clksrc16,
-};
-
-/* display-if
  *
- * display interface clock, divided from esysclk
+ * Note, this used to be two clocks, but was compressed into one.
 */
 
-static unsigned long s3c2443_getrate_display(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
-
-	div &= S3C2443_CLKDIV1_DISPDIV_MASK;
-	div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
-
-	rate = s3c2443_roundrate_clksrc256(clk, rate);
-	rate = parent_rate / rate;
-
-	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
-	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2443_CLKDIV1);
-	return 0;
-}
-
-static struct clk clk_display = {
-	.name		= "display-if",
-	.id		= -1,
-	.parent		= &clk_esysclk,
-	.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-	.enable		= s3c2443_clkcon_enable_s,
-	.get_rate	= s3c2443_getrate_display,
-	.set_rate	= s3c2443_setrate_display,
-	.round_rate	= s3c2443_roundrate_clksrc256,
+struct clk *clk_i2s_srclist[] = {
+	[0] = &clk_i2s_eplldiv.clk,
+	[1] = &clk_i2s_ext,
+	[2] = &clk_epllref.clk,
+	[3] = &clk_epllref.clk,
 };
 
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.id		= -1,
-	.parent		= &clk_msysclk,
-	.get_rate	= s3c2443_prediv_getrate,
+static struct clksrc_clk clk_i2s = {
+	.clk	= {
+		.name		= "i2s-if",
+		.id		= -1,
+		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+		.enable		= s3c2443_clkcon_enable_s,
+
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_i2s_srclist,
+		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };
 
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
 		.name		= "sdi",
 		.id		= -1,
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
 	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}, {
 		.name		= "iis",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -735,353 +314,48 @@ static struct clk init_clocks_disable[] = {
 };
 
 static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.id		= 3,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma",
-		.id		= 4,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma",
-		.id		= 5,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "hsmmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-	}, {
-		.name		= "cfc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus_host,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-/* s3c2443_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
-{
-	printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
-	return clk_set_parent(clk, parent);
-}
-
-static void __init s3c2443_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
-	struct clk *parent;
-
-	switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
-	case S3C2443_CLKSRC_EPLLREF_EXTCLK:
-		parent = &clk_ext;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_XTAL:
-	default:
-		parent = &clk_xtal;
-		break;
-
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF:
-	case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
-		parent = &clk_mpllref;
-		break;
-	}
-
-	clk_init_set_parent(&clk_epllref, parent);
-
-	switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
-	case S3C2443_CLKSRC_I2S_EXT:
-		parent = &clk_i2s_ext;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLDIV:
-	default:
-		parent = &clk_i2s_eplldiv;
-		break;
-
-	case S3C2443_CLKSRC_I2S_EPLLREF:
-	case S3C2443_CLKSRC_I2S_EPLLREF3:
-		parent = &clk_epllref;
-	}
-
-	clk_init_set_parent(&clk_i2s, &clk_epllref);
-
-	/* esysclk source */
-
-	parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
-		&clk_epll : &clk_epllref;
-
-	clk_init_set_parent(&clk_esysclk, parent);
-
-	/* msysclk source */
-
-	if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
-		parent = &clk_mpll;
-	} else {
-		parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
-			&clk_mdivclk : &clk_mpllref;
-	}
-
-	clk_init_set_parent(&clk_msysclk, parent);
-
-	/* arm */
-
-	if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS)
-		parent = &clk_h;
-	else
-		parent = &clk_armdiv;
-
-	clk_init_set_parent(&clk_arm, parent);
-}
-
-/* armdiv divisor table */
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
 };
 
-static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
-
-	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
-}
-
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return clkcon0 + 1;
-}
-
 /* clocks to add straight away */
 
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus_host,
-	&clk_usb_bus,
-	&clk_esysclk,
-	&clk_epllref,
-	&clk_mpllref,
-	&clk_msysclk,
-	&clk_uart,
-	&clk_display,
-	&clk_cam,
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_arm,
 	&clk_i2s_eplldiv,
 	&clk_i2s,
 	&clk_hsspi,
 	&clk_hsmmc_div,
+};
+
+static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 	&clk_armdiv,
-	&clk_arm,
-	&clk_prediv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = s3c2443_get_mpll(mpllcon, xtal);
-	clk_msysclk.rate = pll;
-
-	fclk = pll / s3c2443_fclk_div(clkdiv0);
-	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk /= s3c2443_get_hdiv(clkdiv0);
- 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-
-	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(pll), print_mhz(fclk),
-	       print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
 }
 
 void __init s3c2443_init_clocks(int xtal)
 {
-	struct clk *clkp;
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ret;
 	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2443_setup_clocks();
-	s3c2443_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
 	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref;
-	clk_usb_bus.parent = &clk_usb_bus_host;
+	clk_epll.parent = &clk_epllref.clk;
 
-	/* ensure usb bus clock is within correct rate of 48MHz */
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
 
-	if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
-	}
+	s3c2443_setup_clocks();
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
-	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
 	/* We must be careful disabling the clocks we are not intending to
 	 * be using at boot time, as subsystems such as the LCD which do
@@ -1095,17 +369,8 @@ void __init s3c2443_init_clocks(int xtal)
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 397f3b5..3f65868 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..4c863d3 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,6 +106,9 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	&s3c_device_ac97,
+#endif
 };
 
 static void __init smdk2443_map_io(void)
@@ -118,12 +121,17 @@ static void __init smdk2443_map_io(void)
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }
 
 MACHINE_START(SMDK2443, "SMDK2443")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index f0ef0ab..239476b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
new file mode 100644
index 0000000..4326c30
--- /dev/null
+++ b/arch/arm/mach-s3c24a0/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c24a0/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S3C24A0
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
index 4d4fe48..9146568 100644
--- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	  (0xe0000000UL)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
deleted file mode 100644
index a250bf6..0000000
--- a/arch/arm/mach-s3c6400/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
-	bool
-	help
-	  Internal configuration for default SDHCI
-	  setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	select CPU_S3C6400
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
-	select S3C6400_SETUP_SDHCI
-	help
-	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
deleted file mode 100644
index df1ce4a..0000000
--- a/arch/arm/mach-s3c6400/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
deleted file mode 100644
index b18ac52..0000000
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
deleted file mode 100644
index 6723860..0000000
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
-	return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S
deleted file mode 100644
index fbd90d2..0000000
--- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h
deleted file mode 100644
index d89aae6..0000000
--- a/arch/arm/mach-s3c6400/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c6400/include/mach/gpio.h
deleted file mode 100644
index e8e35e8..0000000
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S3C64XX_GPIO_A_NR	(8)
-#define S3C64XX_GPIO_B_NR	(7)
-#define S3C64XX_GPIO_C_NR	(8)
-#define S3C64XX_GPIO_D_NR	(5)
-#define S3C64XX_GPIO_E_NR	(5)
-#define S3C64XX_GPIO_F_NR	(16)
-#define S3C64XX_GPIO_G_NR	(7)
-#define S3C64XX_GPIO_H_NR	(10)
-#define S3C64XX_GPIO_I_NR	(16)
-#define S3C64XX_GPIO_J_NR	(12)
-#define S3C64XX_GPIO_K_NR	(16)
-#define S3C64XX_GPIO_L_NR	(15)
-#define S3C64XX_GPIO_M_NR	(6)
-#define S3C64XX_GPIO_N_NR	(16)
-#define S3C64XX_GPIO_O_NR	(16)
-#define S3C64XX_GPIO_P_NR	(15)
-#define S3C64XX_GPIO_Q_NR	(9)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S3C64XX_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s3c_gpio_number {
-	S3C64XX_GPIO_A_START = 0,
-	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
-	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
-	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
-	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
-	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
-	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
-	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
-	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
-	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
-	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
-	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
-	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
-	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
-	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
-	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
-	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
-};
-
-/* S3C64XX GPIO number definitions. */
-
-#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
-#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
-#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
-#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
-#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
-#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
-#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
-#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
-#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
-#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
-#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
-#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
-#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
-#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
-#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
-#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
-#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
-
-/* the end of the S3C64XX specific gpios */
-#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-#define S3C_GPIO_END		S3C64XX_GPIO_END
-
-/* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-
-#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
deleted file mode 100644
index 4c97f9a..0000000
--- a/arch/arm/mach-s3c6400/include/mach/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
deleted file mode 100644
index 106ee13..0000000
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/map.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-/* HSMMC units */
-#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
-#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
-#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
-#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
-
-#define S3C_PA_UART		(0x7F005000)
-#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
-#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
-#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
-#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
-#define S3C_UART_OFFSET		(0x400)
-
-/* See notes on UART VA mapping in debug-macro.S */
-#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
-
-#define S3C_VA_UART0		S3C_VA_UARTx(0)
-#define S3C_VA_UART1		S3C_VA_UARTx(1)
-#define S3C_VA_UART2		S3C_VA_UARTx(2)
-#define S3C_VA_UART3		S3C_VA_UARTx(3)
-
-#define S3C64XX_PA_NAND		(0x70200000)
-#define S3C64XX_PA_FB		(0x77100000)
-#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
-#define S3C64XX_PA_WATCHDOG	(0x7E004000)
-#define S3C64XX_PA_SYSCON	(0x7E00F000)
-#define S3C64XX_PA_AC97		(0x7F001000)
-#define S3C64XX_PA_IIS0		(0x7F002000)
-#define S3C64XX_PA_IIS1		(0x7F003000)
-#define S3C64XX_PA_TIMER	(0x7F006000)
-#define S3C64XX_PA_IIC0		(0x7F004000)
-#define S3C64XX_PA_PCM0		(0x7F009000)
-#define S3C64XX_PA_PCM1		(0x7F00A000)
-#define S3C64XX_PA_IISV4	(0x7F00D000)
-#define S3C64XX_PA_IIC1		(0x7F00F000)
-
-#define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
-#define S3C64XX_SZ_GPIO		SZ_4K
-
-#define S3C64XX_PA_SDRAM	(0x50000000)
-#define S3C64XX_PA_VIC0		(0x71200000)
-#define S3C64XX_PA_VIC1		(0x71300000)
-
-#define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
-
-#define S3C64XX_PA_USBHOST	(0x74300000)
-
-#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_TIMER		S3C64XX_PA_TIMER
-#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
-#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
-#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
-#define S3C_PA_IIC		S3C64XX_PA_IIC0
-#define S3C_PA_IIC1		S3C64XX_PA_IIC1
-#define S3C_PA_NAND		S3C64XX_PA_NAND
-#define S3C_PA_FB		S3C64XX_PA_FB
-#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
-#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
-
-#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
deleted file mode 100644
index a6c7f4e..0000000
--- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c6400/include/mach/tick.h
deleted file mode 100644
index d9c0dc7..0000000
--- a/arch/arm/mach-s3c6400/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c6400/mach-smdk6400.c
deleted file mode 100644
index ab19285..0000000
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/s3c6400.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
-	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1A), },
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
-	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
-	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-
-	.init_irq	= s3c6400_init_irq,
-	.map_io		= smdk6400_map_io,
-	.init_machine	= smdk6400_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
deleted file mode 100644
index d876ee5..0000000
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-
-void __init s3c6400_map_io(void)
-{
-	/* setup SDHCI */
-
-	s3c6400_default_sdhci0();
-	s3c6400_default_sdhci1();
-	s3c6400_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-
-	s3c_device_nand.name = "s3c6400-nand";
-}
-
-void __init s3c6400_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
-}
-
-void __init s3c6400_init_irq(void)
-{
-	/* VIC0 does not have IRQS 5..7,
-	 * VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-struct sysdev_class s3c6400_sysclass = {
-	.name	= "s3c6400-core",
-};
-
-static struct sys_device s3c6400_sysdev = {
-	.cls	= &s3c6400_sysclass,
-};
-
-static int __init s3c6400_core_init(void)
-{
-	return sysdev_class_register(&s3c6400_sysclass);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
-	printk("S3C6400: Initialising architecture\n");
-
-	return sysdev_register(&s3c6400_sysdev);
-}
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
deleted file mode 100644
index 1039937..0000000
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6400_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-				  void __iomem *r,
-				  struct mmc_ios *ios,
-				  struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
deleted file mode 100644
index 162f456..0000000
--- a/arch/arm/mach-s3c6410/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
-	bool
-	select S3C64XX_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_ANW6410
-	bool "A&W6410"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the A&W6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_FB
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C6410_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-       
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	select REGULATOR
-	select REGULATOR_WM8350
-	select S3C24XX_GPIO_EXTRA64
-	select MFD_WM8350_I2C
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8350_CONFIG_MODE_3
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	select CPU_S3C6410
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_I2C1
-	help
-          Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_FB_24BPP
-	select HAVE_PWM
-	help
-	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 3e48c3d..0000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
deleted file mode 100644
index 522c086..0000000
--- a/arch/arm/mach-s3c6410/cpu.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s3c6410_map_io(void)
-{
-	iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
-	/* initialise device information early */
-	s3c6410_default_sdhci0();
-	s3c6410_default_sdhci1();
-	s3c6410_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_device_nand.name = "s3c6400-nand";
-}
-
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c24xx_register_baseclocks(xtal);
-	s3c64xx_register_clocks();
-	s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
-	s3c6400_setup_clocks();
-}
-
-void __init s3c6410_init_irq(void)
-{
-	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
-}
-
-struct sysdev_class s3c6410_sysclass = {
-	.name	= "s3c6410-core",
-};
-
-static struct sys_device s3c6410_sysdev = {
-	.cls	= &s3c6410_sysclass,
-};
-
-static int __init s3c6410_core_init(void)
-{
-	return sysdev_class_register(&s3c6410_sysclass);
-}
-
-core_initcall(s3c6410_core_init);
-
-int __init s3c6410_init(void)
-{
-	printk("S3C6410: Initialising architecture\n");
-
-	return sysdev_register(&s3c6410_sysdev);
-}
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c6410/mach-anw6410.c
deleted file mode 100644
index 661cca6..0000000
--- a/arch/arm/mach-s3c6410/mach-anw6410.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- * Copyright 2009 Kwangwoo Lee
- * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
-
-/* DM9000 */
-#define ANW6410_PA_DM9000	(0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV	(0x30000000)
-
-#define ANW6410_EN_DM9000	(1<<11)
-#define ANW6410_EN_LCD		(1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 1);
-		gpio_direction_output(S3C64XX_GPF(4), 1);
-	} else {
-		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 0);
-		gpio_direction_output(S3C64XX_GPF(4), 0);
-	}
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
-	.set_power	= anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.pixclock	= 41094,
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &anw6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
-	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
-	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
-	[0] = {
-		.start = ANW6410_PA_DM9000,
-		.end   = ANW6410_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = ANW6410_PA_DM9000 + 4,
-		.end   = ANW6410_PA_DM9000 + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_EINT(15),
-		.end   = IRQ_EINT(15),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
-	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-	/* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
-	.name	= "dm9000",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
-	.resource	= anw6410_dm9000_resource,
-	.dev	= {
-		.platform_data  = &anw6410_dm9000_pdata,
-	},
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
-		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
-	&s3c_device_fb,
-	&anw6410_lcd_powerdev,
-	&anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
-	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
-
-	anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
-	s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
-	gpio_request(S3C64XX_GPF(1), "panel power");
-	gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
-	anw6410_dm9000_enable();
-
-	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
-	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= anw6410_map_io,
-	.init_machine	= anw6410_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
deleted file mode 100644
index 7619456..0000000
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* mach-hmt.c - Platform code for Airgoo HMT
- *
- * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/nand.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static int hmt_bl_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
-	if (!ret)
-		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
-	return ret;
-}
-
-static int hmt_bl_notify(struct device *dev, int brightness)
-{
-	/*
-	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
-	 * perceived luminance to light output. Assumes range 0..25600
-	 */
-	if (brightness < 0x800) {
-		/* Y = Yn * L / 903.3 */
-		brightness = (100*256 * brightness + 231245/2) / 231245;
-	} else {
-		/* Y = Yn * ((L + 16) / 116 )^3 */
-		int t = (brightness*4 + 16*1024 + 58)/116;
-		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
-	}
-
-	gpio_set_value(S3C64XX_GPB(4), brightness);
-
-	return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
-	gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 100 * 256,
-	.dft_brightness	= 40 * 256,
-	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
-	.init		= hmt_bl_init,
-	.notify		= hmt_bl_notify,
-	.exit		= hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
-		.platform_data = &hmt_backlight_data,
-	},
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
-	.win_mode	= {
-		.pixclock	= 41094,
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &hmt_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_512K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "uboot-env1",
-		.size	= SZ_256K,
-		.offset	= SZ_512K,
-	},
-	[2] = {
-		.name	= "uboot-env2",
-		.size	= SZ_256K,
-		.offset	= SZ_512K + SZ_256K,
-	},
-	[3] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[4] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
-		.partitions	= hmt_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
-	.sets		= hmt_nand_sets,
-};
-
-static struct gpio_led hmt_leds[] = {
-	{ /* left function keys */
-		.name			= "left:blue",
-		.gpio			= S3C64XX_GPO(12),
-		.default_trigger	= "default-on",
-	},
-	{ /* right function keys - red */
-		.name			= "right:red",
-		.gpio			= S3C64XX_GPO(13),
-	},
-	{ /* right function keys - green */
-		.name			= "right:green",
-		.gpio			= S3C64XX_GPO(14),
-	},
-	{ /* right function keys - blue */
-		.name			= "right:blue",
-		.gpio			= S3C64XX_GPO(15),
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
-	.num_leds = ARRAY_SIZE(hmt_leds),
-	.leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&s3c_device_usb,
-	&s3c_device_timer[1],
-	&hmt_backlight_device,
-	&hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
-	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
-}
-
-static void __init hmt_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_nand_set_platdata(&hmt_nand_info);
-
-	gpio_request(S3C64XX_GPC(7), "usb power");
-	gpio_direction_output(S3C64XX_GPC(7), 0);
-	gpio_request(S3C64XX_GPM(0), "usb power");
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_request(S3C64XX_GPK(7), "usb power");
-	gpio_direction_output(S3C64XX_GPK(7), 1);
-	gpio_request(S3C64XX_GPF(13), "usb power");
-	gpio_direction_output(S3C64XX_GPF(13), 1);
-
-	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
-	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= hmt_map_io,
-	.init_machine	= hmt_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
deleted file mode 100644
index 55e9bbf..0000000
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
- *
- * Copyright (C) 2008-2009 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
-	/* REVISIT: NCP uses only serial 1, 2 */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
-	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
-}
-
-static void __init ncp_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
-	/* Maintainer: Samsung Electronics */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= ncp_map_io,
-	.init_machine	= ncp_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
deleted file mode 100644
index 8969fe7..0000000
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/s3c6410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		gpio_direction_output(S3C64XX_GPF(13), 1);
-		gpio_direction_output(S3C64XX_GPF(15), 1);
-
-		/* fire nRESET on power up */
-		gpio_direction_output(S3C64XX_GPN(5), 0);
-		msleep(10);
-		gpio_direction_output(S3C64XX_GPN(5), 1);
-		msleep(1);
-	} else {
-		gpio_direction_output(S3C64XX_GPF(15), 0);
-		gpio_direction_output(S3C64XX_GPF(13), 0);
-	}
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
-	.set_power	= smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.pixclock	= 41094,
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &smdk6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = {
-		.start = 0x18000000,
-		.end   = 0x18000000 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C_EINT(10),
-		.end   = S3C_EINT(10),
-		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
-	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
-	.name          = "smsc911x",
-	.id            = -1,
-	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
-	.resource      = &smdk6410_smsc911x_resources[0],
-	.dev = {
-		.platform_data = &smdk6410_smsc911x_pdata,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
-	{
-		/* WM8580 */
-		.supply = "PVDD",
-		.dev_name = "0-001b",
-	},
-	{
-		/* WM8580 */
-		.supply = "AVDD",
-		.dev_name = "0-001b",
-	},
-};
-
-static struct regulator_init_data smdk6410_b_pwr_5v_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
-	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
-	.supply_name = "B_PWR_5V",
-	.microvolts = 5000000,
-	.init_data = &smdk6410_b_pwr_5v_data,
-	.gpio = -EINVAL,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
-	.name          = "reg-fixed-voltage",
-	.id            = -1,
-	.dev = {
-		.platform_data = &smdk6410_b_pwr_5v_pdata,
-	},
-};
-#endif
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
-	&s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
-	&s3c_device_hsmmc1,
-#endif
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_usb,
-	&s3c_device_usb_hsotg,
-
-#ifdef CONFIG_REGULATOR
-	&smdk6410_b_pwr_5v,
-#endif
-	&smdk6410_lcd_powerdev,
-
-	&smdk6410_smsc911x,
-};
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
-	.constraints = {
-		.name = "PVDD_INT/PVDD_PLL",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
-	.constraints = {
-		.name = "PVDD_MEM",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.always_on = 1,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
-	{
-		/* WM8580 */
-		.supply = "DVDD",
-		.dev_name = "0-001b",
-	},
-};
-
-static struct regulator_init_data wm8350_dcdc4_data = {
-	.constraints = {
-		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
-	.consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
-	{
-		.supply = "vddarm",
-	}
-};
-
-static struct regulator_init_data wm8350_dcdc6_data = {
-	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
-	.consumer_supplies = dcdc6_consumers,
-};
-
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
-	.constraints = {
-		.name = "PVDD_ALIVE",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
-	.constraints = {
-		.name = "PVDD_OTG",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
-		.always_on = 1,
-	},
-};
-
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
-	.constraints = {
-		.name = "PVDD_LCD",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data wm8350_ldo4_data = {
-	.constraints = {
-		.name = "PVDD_OTGI/HPVDD/AVDD",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.apply_uV = 1,
-		.always_on = 1,
-	},
-};
-
-static struct {
-	int regulator;
-	struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
-	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
-	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
-	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &wm8350_dcdc6_data },
-	{ WM8350_LDO_1, &wm8350_ldo1_data },
-	{ WM8350_LDO_2, &wm8350_ldo2_data },
-	{ WM8350_LDO_3, &wm8350_ldo3_data },
-	{ WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
-	int i;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	/* Instantiate the regulators */
-	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
-		wm8350_register_regulator(wm8350,
-					  wm1190_regulators[i].regulator,
-					  wm1190_regulators[i].initdata);
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
-	.init = smdk6410_wm8350_init,
-	.irq_high = 1,
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-	{ I2C_BOARD_INFO("wm8350", 0x1a),
-	  .platform_data = &smdk6410_wm8350_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
-};
-
-static void __init smdk6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-
-	/* set the LCD type */
-
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the lcd bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-
-	gpio_request(S3C64XX_GPN(5), "LCD power");
-	gpio_request(S3C64XX_GPF(13), "LCD power");
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smdk6410_map_io,
-	.init_machine	= smdk6410_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 816d2d9..0000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything acording to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 0000000..f5a5972
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,221 @@
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	select SAMSUNG_WAKEMASK
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+config S3C64XX_DEV_ONENAND1
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the A&W6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	select CPU_S3C6410
+	select SAMSUNG_DEV_ADC
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_FB
+	select SAMSUNG_DEV_TS
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_FB_24BPP
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM8350
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM8350_I2C
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM831X
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	select CPU_S3C6410
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_I2C1
+	help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
+
+config MACH_SMARTQ
+	bool
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_FB
+	select S3C_DEV_HWMON
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_FB_24BPP
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select HAVE_PWM
+	help
+	    Shared machine support for SmartQ 5/7
+
+config MACH_SMARTQ5
+	bool "SmartQ 5"
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 5
+
+config MACH_SMARTQ7
+	bool "SmartQ 7"
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 7
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
new file mode 100644
index 0000000..9d10069
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -0,0 +1,65 @@
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core files
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
+
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_S3C64XX_DEV_TS)	+= dev-ts.o
+obj-$(CONFIG_S3C64XX_DEV_ONENAND1)	+= dev-onenand1.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
index ba41fdc..ba41fdc 100644
--- a/arch/arm/mach-s3c6400/Makefile.boot
+++ b/arch/arm/mach-s3c64xx/Makefile.boot
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
new file mode 100644
index 0000000..fbd85a9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -0,0 +1,851 @@
+/* linux/arch/arm/plat-s3c64xx/clock.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX Base clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+#define clk_fout_epll	clk_epll
+
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+#ifdef CONFIG_CPU_S3C6410
+		.name		= "iis",
+		.id		= -1,  /* There's only one IISv4 port */
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
+	}, {
+#endif
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_USB,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
+	.sources	= &clk_src_apll,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
+	.sources	= &clk_src_epll,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
+	.sources	= &clk_src_mpll,
+};
+
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return parent;
+
+	div = (parent / rate) - 1;
+	if (div > armclk_mask)
+		div = armclk_mask;
+
+	return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (armclk_mask + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S3C_CLK_DIV0);
+	val &= ~armclk_mask;
+	val |= (div - 1);
+	__raw_writel(val, S3C_CLK_DIV0);
+
+	return 0;
+
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c64xx_clk_arm_get_rate,
+		.set_rate	= s3c64xx_clk_arm_set_rate,
+		.round_rate	= s3c64xx_clk_arm_round_rate,
+	},
+};
+
+static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
+		rate /= 2;
+
+	return rate;
+}
+
+static struct clk_ops clk_dout_ops = {
+	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
+};
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.ops		= &clk_dout_ops,
+};
+
+static struct clk *clkset_spi_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_spi_mmc = {
+	.sources	= clkset_spi_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+};
+
+static struct clk *clkset_irda_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	&clk_27m,
+};
+
+static struct clksrc_sources clkset_irda = {
+	.sources	= clkset_irda_list,
+	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_uhost = {
+	.sources	= clkset_uhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
+};
+
+/* The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S3C64XX version, and also
+ * have a common parent divisor so are not included here.
+ */
+
+/* clocks that feed other parts of the clock source tree */
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_iisv4_cd = {
+	.name		= "iis_cdclk_v4",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd0,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clk *clkset_audio1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iis_cd1,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clk *clkset_audio2_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iisv4_cd,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clk *clkset_camif_list[] = {
+	&clk_h2,
+};
+
+static struct clksrc_sources clkset_camif = {
+	.sources	= clkset_camif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
+		.reg_div 	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "usb-bus-host",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
+		.sources	= &clkset_uhost,
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_UART,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
+		.sources	= &clkset_uart,
+	}, {
+/* Where does UCLK0 come from? */
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 14, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "spi-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 16, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4  },
+		.sources	= &clkset_spi_mmc,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
+		.sources	= &clkset_audio0,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= 1,
+			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
+		.sources	= &clkset_audio1,
+	}, {
+		.clk	= {
+			.name		= "audio-bus",
+			.id		= -1,  /* There's only one IISv4 port */
+			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
+		.sources	= &clkset_audio2,
+	}, {
+		.clk	= {
+			.name		= "irda-bus",
+			.id		= 0,
+			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
+		.sources	= &clkset_irda,
+	}, {
+		.clk	= {
+			.name		= "camera",
+			.id		= -1,
+			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
+		.reg_src	= { .reg = NULL, .shift = 0, .size = 0  },
+		.sources	= &clkset_camif,
+	},
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s3c6400_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk2;
+	unsigned long pclk;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+	u32 clkdiv0;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
+	epll = s3c6400_get_epll(xtal);
+	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
+	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
+
+	fclk = mpll;
+
+	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
+	       apll, mpll, epll);
+
+	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
+	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
+	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
+
+	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
+	       hclk2, hclk, pclk);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h2.rate = hclk2;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks1[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_iisv4_cd,
+	&clk_pcm_cd,
+	&clk_mout_epll.clk,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_arm,
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_h2,
+	&clk_xusbxti,
+};
+
+/**
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
+ *
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c64xx_register_clocks(unsigned long xtal, 
+				    unsigned armclk_divlimit)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	armclk_mask = armclk_divlimit;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
new file mode 100644
index 0000000..374e45e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -0,0 +1,167 @@
+/* linux/arch/arm/plat-s3c64xx/cpu.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x36400000,
+		.idmask		= 0xfffff000,
+		.map_io		= s3c6400_map_io,
+		.init_clocks	= s3c6400_init_clocks,
+		.init_uarts	= s3c6400_init_uarts,
+		.init		= s3c6400_init,
+		.name		= name_s3c6400,
+	}, {
+		.idcode		= 0x36410100,
+		.idmask		= 0xffffff00,
+		.map_io		= s3c6410_map_io,
+		.init_clocks	= s3c6410_init_clocks,
+		.init_uarts	= s3c6410_init_uarts,
+		.init		= s3c6410_init,
+		.name		= name_s3c6410,
+	},
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_MEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
+	},
+};
+
+
+struct sysdev_class s3c64xx_sysclass = {
+	.name	= "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+	.cls	= &s3c64xx_sysclass,
+};
+
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!idcode) {
+		/* S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read. */
+
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+	sysdev_class_register(&s3c64xx_sysclass);
+	return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
index 74c0e83..74c0e83 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/mach-s3c64xx/cpufreq.c
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
new file mode 100644
index 0000000..c3e9e73
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -0,0 +1,335 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
+
+#include <plat/devs.h>
+#include <plat/audio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
+static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+	default:
+		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+
+	return 0;
+}
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_OUT,
+		.end   = DMACH_I2S0_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_IN,
+		.end   = DMACH_I2S0_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s0_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_OUT,
+		.end   = DMACH_I2S1_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_IN,
+		.end   = DMACH_I2S1_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_HSI_I2SV40_TX,
+		.end   = DMACH_HSI_I2SV40_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_HSI_I2SV40_RX,
+		.end   = DMACH_HSI_I2SV40_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+	.dev = {
+		.platform_data = &s3c_i2sv4_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+	return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+	return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_AC97,
+		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
+	.resource	  = s3c64xx_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s3c64xx_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+	if (num == S3C64XX_AC97_GPD)
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+	else
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c
new file mode 100644
index 0000000..92ffd5b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-onenand1.c
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c64xx_onenand1_resources[] = {
+	[0] = {
+		.start	= S3C64XX_PA_ONENAND1,
+		.end	= S3C64XX_PA_ONENAND1 + 0x400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C64XX_PA_ONENAND1_BUF,
+		.end	= S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_ONENAND1,
+		.end	= IRQ_ONENAND1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+	.name		= "samsung-onenand",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
+	.resource	= s3c64xx_onenand1_resources,
+};
+
+void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s3c64xx_device_onenand1.dev.platform_data = pd;
+}
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
new file mode 100644
index 0000000..29c32d0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s3c64xx/dev-spi.c
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
+	[S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
+	[S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
+		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
+		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
+		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_spi0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI0,
+		.end   = S3C64XX_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi0_resource),
+	.resource	  = s3c64xx_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi0);
+
+static struct resource s3c64xx_spi1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_SPI1,
+		.end   = S3C64XX_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.cfg_gpio = s3c64xx_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_spi1_resource),
+	.resource	  = s3c64xx_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s3c64xx_spi1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_spi1);
+
+void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s3c64xx_spi0_pdata;
+		break;
+	case 1:
+		pd = &s3c64xx_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
new file mode 100644
index 0000000..f797f74
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -0,0 +1,147 @@
+/* linux/arch/arm/plat-s3c64xx/dev-uart.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s3c64xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s3c64xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c6xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s3c64xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s3c64xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s3c64xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s3c6xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s3c64xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
+	},
+};
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
new file mode 100644
index 0000000..5567e03
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -0,0 +1,750 @@
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <mach/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+	struct sys_device	 sysdev;
+	struct clk		*clk;
+	void __iomem		*regs;
+	struct s3c2410_dma_chan *channels;
+	enum dma_ch		 chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+		 chan->number,
+		 readl(chan->regs + PL080_CH_SRC_ADDR),
+		 readl(chan->regs + PL080_CH_DST_ADDR),
+		 readl(chan->regs + PL080_CH_LLI),
+		 readl(chan->regs + PL080_CH_CONTROL),
+		 readl(chan->regs + PL080S_CH_CONTROL2),
+		 readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+		 lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *ptr;
+	struct s3c64xx_dma_buff *end;
+
+	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+		 chan->number, chan->next, chan->curr, chan->end);
+
+	ptr = chan->next;
+	end = chan->end;
+
+	if (debug_show_buffs) {
+		for (; ptr != NULL; ptr = ptr->next) {
+			pr_debug("DMA%d: %08x ",
+				 chan->number, ptr->lli_dma);
+			show_lli(ptr->lli);
+		}
+	}
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned int start, offs;
+
+	start = 0;
+
+	if (channel >= DMACH_PCM1_TX)
+		start = 8;
+
+	for (offs = 0; offs < 8; offs++) {
+		chan = &s3c2410_chans[start + offs];
+		if (!chan->in_use)
+			goto found;
+	}
+
+	return NULL;
+
+found:
+	s3c_dma_chan_map[channel] = chan;
+	return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (xferunit) {
+	case 1:
+		chan->hw_width = 0;
+		break;
+	case 2:
+		chan->hw_width = 1;
+		break;
+	case 4:
+		chan->hw_width = 2;
+		break;
+	default:
+		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+				 struct pl080s_lli *lli,
+				 dma_addr_t data, int size)
+{
+	dma_addr_t src, dst;
+	u32 control0, control1;
+
+	switch (chan->source) {
+	case S3C2410_DMASRC_HW:
+		src = chan->dev_addr;
+		dst = data;
+		control0 = PL080_CONTROL_SRC_AHB2;
+		control0 |= PL080_CONTROL_DST_INCR;
+		break;
+
+	case S3C2410_DMASRC_MEM:
+		src = data;
+		dst = chan->dev_addr;
+		control0 = PL080_CONTROL_DST_AHB2;
+		control0 |= PL080_CONTROL_SRC_INCR;
+		break;
+	default:
+		BUG();
+	}
+
+	/* note, we do not currently setup any of the burst controls */
+
+	control1 = size >> chan->hw_width;	/* size in no of xfers */
+	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
+	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+	lli->next_lli = 0;
+	lli->control0 = control0;
+	lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+				struct pl080s_lli *lli)
+{
+	void __iomem *regs = chan->regs;
+
+	pr_debug("%s: LLI %p => regs\n", __func__, lli);
+	show_lli(lli);
+
+	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+	writel(lli->next_lli, regs + PL080_CH_LLI);
+	writel(lli->control0, regs + PL080_CH_CONTROL);
+	writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dmac *dmac = chan->dmac;
+	u32 config;
+	u32 bit = chan->bit;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: clearing interrupts\n", __func__);
+
+	/* clear interrupts */
+	writel(bit, dmac->regs + PL080_TC_CLEAR);
+	writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+	pr_debug("%s: starting channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_ENABLE;
+
+	pr_debug("%s: writing config %08x\n", __func__, config);
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+	u32 config;
+	int timeout;
+
+	pr_debug("%s: stopping channel\n", __func__);
+
+	dbg_showchan(chan);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config |= PL080_CONFIG_HALT;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	timeout = 1000;
+	do {
+		config = readl(chan->regs + PL080S_CH_CONFIG);
+		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+		if (config & PL080_CONFIG_ACTIVE)
+			udelay(10);
+		else
+			break;
+		} while (--timeout > 0);
+
+	if (config & PL080_CONFIG_ACTIVE) {
+		printk(KERN_ERR "%s: channel still active\n", __func__);
+		return -EFAULT;
+	}
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+					 struct s3c64xx_dma_buff *buf,
+					 enum s3c2410_dma_buffresult result)
+{
+	if (chan->callback_fn != NULL)
+		(chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+	kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c64xx_dma_buff *buff, *next;
+	u32 config;
+
+	dbg_showchan(chan);
+
+	pr_debug("%s: flushing channel\n", __func__);
+
+	config = readl(chan->regs + PL080S_CH_CONFIG);
+	config &= ~PL080_CONFIG_ENABLE;
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	/* dump all the buffers associated with this channel */
+
+	for (buff = chan->curr; buff != NULL; buff = next) {
+		next = buff->next;
+		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+		s3c64xx_dma_freebuff(buff);
+	}
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c64xx_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c64xx_dma_stop(chan);
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c64xx_dma_flush(chan);
+
+	/* belive PAUSE/RESUME are no-ops */
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_STARTED:
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	struct s3c64xx_dma_buff *next;
+	struct s3c64xx_dma_buff *buff;
+	struct pl080s_lli *lli;
+	unsigned long flags;
+	int ret;
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
+	if (!buff) {
+		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+		return -ENOMEM;
+	}
+
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
+	if (!lli) {
+		printk(KERN_ERR "%s: no memory for lli\n", __func__);
+		ret = -ENOMEM;
+		goto err_buff;
+	}
+
+	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+	buff->lli = lli;
+	buff->pw = id;
+
+	s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+	local_irq_save(flags);
+
+	if ((next = chan->next) != NULL) {
+		struct s3c64xx_dma_buff *end = chan->end;
+		struct pl080s_lli *endlli = end->lli;
+
+		pr_debug("enquing onto channel\n");
+
+		end->next = buff;
+		endlli->next_lli = buff->lli_dma;
+
+		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+			struct s3c64xx_dma_buff *curr = chan->curr;
+			lli->next_lli = curr->lli_dma;
+		}
+
+		if (next == chan->curr) {
+			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+			chan->next = buff;
+		}
+
+		show_lli(endlli);
+		chan->end = buff;
+	} else {
+		pr_debug("enquing onto empty channel\n");
+
+		chan->curr = buff;
+		chan->next = buff;
+		chan->end = buff;
+
+		s3c64xx_lli_to_regs(chan, lli);
+	}
+
+	local_irq_restore(flags);
+
+	show_lli(lli);
+
+	dbg_showchan(chan);
+	dbg_showbuffs(chan);
+	return 0;
+
+err_buff:
+	kfree(buff);
+	return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(unsigned int channel,
+			  enum s3c2410_dmasrc source,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	u32 peripheral;
+	u32 config = 0;
+
+	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+		 __func__, channel, source, devaddr, chan);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	peripheral = (chan->peripheral & 0xf);
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+		break;
+	case S3C2410_DMASRC_MEM:
+		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+		break;
+	default:
+		printk(KERN_ERR "%s: bad source\n", __func__);
+		return -EINVAL;
+	}
+
+	/* allow TC and ERR interrupts */
+	config |= PL080_CONFIG_TC_IRQ_MASK;
+	config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+	pr_debug("%s: config %08x\n", __func__, config);
+
+	writel(config, chan->regs + PL080S_CH_CONFIG);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+			    dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	WARN_ON(!chan);
+	if (!chan)
+		return -EINVAL;
+
+	if (src != NULL)
+		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+	if (dst != NULL)
+		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c64xx_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+	chan->peripheral = channel;
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+	return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		s3c_dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+	struct s3c64xx_dmac *dmac = pw;
+	struct s3c2410_dma_chan *chan;
+	enum s3c2410_dma_buffresult res;
+	u32 tcstat, errstat;
+	u32 bit;
+	int offs;
+
+	tcstat = readl(dmac->regs + PL080_TC_STATUS);
+	errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+		struct s3c64xx_dma_buff *buff;
+
+		if (!(errstat & bit) && !(tcstat & bit))
+			continue;
+
+		chan = dmac->channels + offs;
+		res = S3C2410_RES_ERR;
+
+		if (tcstat & bit) {
+			writel(bit, dmac->regs + PL080_TC_CLEAR);
+			res = S3C2410_RES_OK;
+		}
+
+		if (errstat & bit)
+			writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+		/* 'next' points to the buffer that is next to the
+		 * currently active buffer.
+		 * For CIRCULAR queues, 'next' will be same as 'curr'
+		 * when 'end' is the active buffer.
+		 */
+		buff = chan->curr;
+		while (buff && buff != chan->next
+				&& buff->next != chan->next)
+			buff = buff->next;
+
+		if (!buff)
+			BUG();
+
+		if (buff == chan->next)
+			buff = chan->end;
+
+		s3c64xx_dma_bufffdone(chan, buff, res);
+
+		/* Free the node and update curr, if non-circular queue */
+		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+			chan->curr = buff->next;
+			s3c64xx_dma_freebuff(buff);
+		}
+
+		/* Update 'next' */
+		buff = chan->next;
+		if (chan->next == chan->end) {
+			chan->next = chan->curr;
+			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+				chan->end = NULL;
+		} else {
+			chan->next = buff->next;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+	.name		= "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+			     int irq, unsigned int base)
+{
+	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+	struct s3c64xx_dmac *dmac;
+	char clkname[16];
+	void __iomem *regs;
+	void __iomem *regptr;
+	int err, ch;
+
+	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+	if (!dmac) {
+		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+		return -ENOMEM;
+	}
+
+	dmac->sysdev.id = chno / 8;
+	dmac->sysdev.cls = &dma_sysclass;
+
+	err = sysdev_register(&dmac->sysdev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+		goto err_alloc;
+	}
+
+	regs = ioremap(base, 0x200);
+	if (!regs) {
+		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+		err = -ENXIO;
+		goto err_dev;
+	}
+
+	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+	dmac->clk = clk_get(NULL, clkname);
+	if (IS_ERR(dmac->clk)) {
+		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+		err = PTR_ERR(dmac->clk);
+		goto err_map;
+	}
+
+	clk_enable(dmac->clk);
+
+	dmac->regs = regs;
+	dmac->chanbase = chbase;
+	dmac->channels = chptr;
+
+	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+	if (err < 0) {
+		printk(KERN_ERR "%s: failed to get irq\n", __func__);
+		goto err_clk;
+	}
+
+	regptr = regs + PL080_Cx_BASE(0);
+
+	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+		       __func__, chno, regptr);
+
+		chptr->bit = 1 << ch;
+		chptr->number = chno;
+		chptr->dmac = dmac;
+		chptr->regs = regptr;
+		regptr += PL008_Cx_STRIDE;
+	}
+
+	/* for the moment, permanently enable the controller */
+	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+	return 0;
+
+err_clk:
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+err_map:
+	iounmap(regs);
+err_dev:
+	sysdev_unregister(&dmac->sysdev);
+err_alloc:
+	kfree(dmac);
+	return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
+	if (!dma_pool) {
+		printk(KERN_ERR "%s: failed to create pool\n", __func__);
+		return -ENOMEM;
+	}
+
+	ret = sysdev_class_register(&dma_sysclass);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Set all DMA configuration to be DMA, not SDMA */
+	writel(0xffffff, S3C_SYSREG(0x110));
+
+	/* Register standard DMA controlers */
+	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
new file mode 100644
index 0000000..60c929a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -0,0 +1,294 @@
+/* arch/arm/plat-s3c64xx/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIOlib support 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/regs-gpio.h>
+
+/* GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
+	.cfg_eint	= 7,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
+	.cfg_eint	= 3,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit[] = {
+	{
+		.base	= S3C64XX_GPA_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S3C64XX_GPB_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S3C64XX_GPC_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S3C64XX_GPD_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S3C64XX_GPE_BASE,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
+		},
+	},
+};
+
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
+static struct s3c_gpio_chip gpio_4bit2[] = {
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0111,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &gpio_4bit_cfg_eint0011,
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
+		},
+	},
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
+	.cfg_eint	= 2,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
+	.cfg_eint	= 3,
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+	return IRQ_EINT(0) + pin;
+}
+
+static struct s3c_gpio_chip gpio_2bit[] = {
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S3C64XX_GPI_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S3C64XX_GPJ_BASE,
+		.config	= &gpio_2bit_cfg_noint,
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.config	= &gpio_2bit_cfg_eint10,
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = s3c64xx_gpio2int_gpn,
+		},
+	}, {
+		.base	= S3C64XX_GPO_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.base	= S3C64XX_GPP_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S3C64XX_GPQ_BASE,
+		.config	= &gpio_2bit_cfg_eint11,
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	},
+};
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
+}
+
+static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s3c64xx_gpiolib_init(void)
+{
+	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
+			    samsung_gpiolib_add_4bit);
+
+	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
+			    samsung_gpiolib_add_4bit2);
+
+	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+			    s3c64xx_gpiolib_add_2bit);
+
+	return 0;
+}
+
+core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..f9ab5d2
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, rtmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..0a5d926
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS	(16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+	/* DMA0/SDMA0 */
+	DMACH_UART0 = 0,
+	DMACH_UART0_SRC2,
+	DMACH_UART1,
+	DMACH_UART1_SRC2,
+	DMACH_UART2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,
+	DMACH_UART3_SRC2,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_OUT,
+	DMACH_I2S0_IN,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_HSI_I2SV40_TX,
+	DMACH_HSI_I2SV40_RX,
+
+	/* DMA1/SDMA1 */
+	DMACH_PCM1_TX = 16,
+	DMACH_PCM1_RX,
+	DMACH_I2S1_OUT,
+	DMACH_I2S1_IN,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_AC97_PCMOUT,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_MICIN,
+	DMACH_PWM,
+	DMACH_IRDA,
+	DMACH_EXTERNAL,
+	DMACH_RES1,
+	DMACH_RES2,
+	DMACH_SECURITY_RX,	/* SDMA1 only */
+	DMACH_SECURITY_TX,	/* SDMA1 only */
+	DMACH_MAX		/* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR		(1 << 0)
+
+#include <plat/dma.h>
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+	struct s3c64xx_dma_buff *next;
+
+	void			*pw;
+	struct pl080s_lli	*lli;
+	dma_addr_t		 lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 bit;	      /* bit for enable/disable/etc */
+	unsigned char		 hw_width;
+	unsigned char		 peripheral;
+
+	unsigned int		 flags;
+	enum s3c2410_dmasrc	 source;
+
+
+	dma_addr_t		dev_addr;
+
+	struct s3c2410_dma_client *client;
+	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
+
+	void __iomem		*regs;
+
+	/* cdriver callbacks */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* buffer list and information */
+	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
+	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
+	struct s3c64xx_dma_buff	*end;		/* end of queue */
+
+	/* note, when channel is running in circular mode, curr is the
+	 * first buffer enqueued, end is the last and curr is where the
+	 * last buffer-done event is set-at. The buffers are not freed
+	 * and the last buffer hardware descriptor points back to the
+	 * first.
+	 */
+};
+
+#include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..dd36260
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for the Samsung S3C64XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
new file mode 100644
index 0000000..34212e1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank A register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
+#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
+#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
+#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
+#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
+
+#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
+#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
+
+#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
+#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
+
+#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
+#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
+
+#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
+#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
+
+#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
+#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
+
+#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
+#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
+
+#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
+#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
+
+#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
+#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
new file mode 100644
index 0000000..7232c03
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank B register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
+#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
+#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
+#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
+#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
+
+#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
+#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
+#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
+#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
+#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
+
+#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
+#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
+#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
+#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
+#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
+
+#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
+#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
+#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
+#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
+#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
+#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
+
+#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
+#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
+#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
+#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
+#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
+
+#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
+#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
+#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
+#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
+
+#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
+#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
+
+#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
+#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
new file mode 100644
index 0000000..db189ab
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank C register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
+#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
+#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
+#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
+#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
+
+#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
+#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
+
+#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
+#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
+
+#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
+#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
+
+#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
+#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
+
+#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
+#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
+#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
+
+#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
+#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
+#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
+
+#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
+#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
+
+#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
+#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
new file mode 100644
index 0000000..1a01cee
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -0,0 +1,49 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank D register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
+#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
+#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
+#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
+#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
+
+#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
+#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
+#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
+#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
+
+#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
+#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
+#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
+
+#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
+#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
+#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
+#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
+
+#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
+#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
+#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
+#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
+
+#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
+#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
+#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
+#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
new file mode 100644
index 0000000..f057adb
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank E register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
+#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
+#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
+#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
+#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
+
+#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
+#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
+#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
+
+#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
+#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
+#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
+
+#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
+#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
+#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
+
+#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
+#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
+#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
+
+#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
+#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
+#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
new file mode 100644
index 0000000..62ab8f5
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank F register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
+#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
+#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
+#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
+#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
+
+#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
+#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
+
+#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
+#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
+
+#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
+#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
+
+#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
+#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
+
+#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
+#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
+
+#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
+#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
+
+#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
+#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
+
+#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
+#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
+
+#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
+#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
+
+#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
+#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
+
+#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
+#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
+
+#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
+#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
+
+#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
+#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
+
+#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
+#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
+
+#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
+#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
+
+#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
new file mode 100644
index 0000000..b94954a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank G register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
+#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
+#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
+#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
+#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
+
+#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
+#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
+
+#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
+#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
+
+#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
+#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
+
+#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
+#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
+
+#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
+#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
+
+#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
+#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
new file mode 100644
index 0000000..5d75aaa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -0,0 +1,74 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank H register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
+#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
+#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
+#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
+#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
+#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
+
+#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
+#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
+#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
+
+#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
+#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
+#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
+
+#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
+#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
+#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
+
+#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
+#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
+#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
+
+#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
+#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
+#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
+
+#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
+#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
+#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
+
+#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
+#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
+#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
+#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
+#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
+#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
+
+#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
+#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
+#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
+#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
+#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
+#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
+
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
+
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
new file mode 100644
index 0000000..4ceaa60
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -0,0 +1,40 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank I register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
+#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
+#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
+#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
+#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
+
+#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPI0_VD0		(0x02 << 0)
+#define S3C64XX_GPI1_VD1		(0x02 << 2)
+#define S3C64XX_GPI2_VD2		(0x02 << 4)
+#define S3C64XX_GPI3_VD3		(0x02 << 6)
+#define S3C64XX_GPI4_VD4		(0x02 << 8)
+#define S3C64XX_GPI5_VD5		(0x02 << 10)
+#define S3C64XX_GPI6_VD6		(0x02 << 12)
+#define S3C64XX_GPI7_VD7		(0x02 << 14)
+#define S3C64XX_GPI8_VD8		(0x02 << 16)
+#define S3C64XX_GPI9_VD9		(0x02 << 18)
+#define S3C64XX_GPI10_VD10		(0x02 << 20)
+#define S3C64XX_GPI11_VD11		(0x02 << 22)
+#define S3C64XX_GPI12_VD12		(0x02 << 24)
+#define S3C64XX_GPI13_VD13		(0x02 << 26)
+#define S3C64XX_GPI14_VD14		(0x02 << 28)
+#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
new file mode 100644
index 0000000..6f25cd0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank J register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
+#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
+#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
+#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
+#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
+
+#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPJ0_VD16		(0x02 << 0)
+#define S3C64XX_GPJ1_VD17		(0x02 << 2)
+#define S3C64XX_GPJ2_VD18		(0x02 << 4)
+#define S3C64XX_GPJ3_VD19		(0x02 << 6)
+#define S3C64XX_GPJ4_VD20		(0x02 << 8)
+#define S3C64XX_GPJ5_VD21		(0x02 << 10)
+#define S3C64XX_GPJ6_VD22		(0x02 << 12)
+#define S3C64XX_GPJ7_VD23		(0x02 << 14)
+#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
+#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
+#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
+#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
new file mode 100644
index 0000000..d0aeda1
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank N register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
+#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
+
+#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPN0_EINT0		(0x02 << 0)
+#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
+
+#define S3C64XX_GPN1_EINT1		(0x02 << 2)
+#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
+
+#define S3C64XX_GPN2_EINT2		(0x02 << 4)
+#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
+
+#define S3C64XX_GPN3_EINT3		(0x02 << 6)
+#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
+
+#define S3C64XX_GPN4_EINT4		(0x02 << 8)
+#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
+
+#define S3C64XX_GPN5_EINT5		(0x02 << 10)
+#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
+
+#define S3C64XX_GPN6_EINT6		(0x02 << 12)
+#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
+
+#define S3C64XX_GPN7_EINT7		(0x02 << 14)
+#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
+
+#define S3C64XX_GPN8_EINT8		(0x02 << 16)
+#define S3C64XX_GPN9_EINT9		(0x02 << 18)
+#define S3C64XX_GPN10_EINT10		(0x02 << 20)
+#define S3C64XX_GPN11_EINT11		(0x02 << 22)
+#define S3C64XX_GPN12_EINT12		(0x02 << 24)
+#define S3C64XX_GPN13_EINT13		(0x02 << 26)
+#define S3C64XX_GPN14_EINT14		(0x02 << 28)
+#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
new file mode 100644
index 0000000..21868fa
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank O register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
+#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
+#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
+#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
+#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
+
+#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
+#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
+
+#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
+#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
+
+#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
+#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
+
+#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
+#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
+
+#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
+
+#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
+
+#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
+#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
+
+#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
+#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
+
+#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
+#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
+
+#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
+#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
+
+#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
+#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
+
+#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
+#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
+
+#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
+#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
+
+#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
+#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
+
+#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
+#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
+
+#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
+#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
new file mode 100644
index 0000000..46bcfb6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank P register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
+#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
+#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
+#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
+#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
+
+#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
+#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
+
+#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
+#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
+
+#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
+#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
+
+#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
+#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
+
+#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
+#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
+
+#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
+#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
+
+#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
+#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
+
+#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
+#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
+
+#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
+#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
+
+#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
+#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
+
+#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
+#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
+
+#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
+#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
+
+#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
+#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
+
+#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
+#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
+
+#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
+#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
new file mode 100644
index 0000000..1712223
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * 	Ben Dooks <ben@simtec.co.uk>
+ * 	http://armlinux.simtec.co.uk/
+ *
+ * GPIO Bank Q register and configuration definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
+#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
+#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
+#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
+#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
+
+#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
+#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
+
+#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
+#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
+
+#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
+
+#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
+
+#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
+
+#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
+
+#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
+
+#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
+#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
+
+#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
+#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
new file mode 100644
index 0000000..0d46e99
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -0,0 +1,100 @@
+/* arch/arm/mach-s3c6400/include/mach/gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#define BOARD_NR_GPIOS 16
+
+#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
index 862d033..862d033 100644
--- a/arch/arm/mach-s3c6400/include/mach/hardware.h
+++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h
new file mode 100644
index 0000000..de5716d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c64xxinclude/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S3C64XX based
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
new file mode 100644
index 0000000..8e2df26
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -0,0 +1,220 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
+#else
+#define IRQ_BOARD_NR 16
+#endif
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS	(IRQ_BOARD_END + 1)
+
+/* Compatibility */
+
+#define IRQ_ONENAND	IRQ_ONENAND0
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
new file mode 100644
index 0000000..e1eab3c
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -0,0 +1,124 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM		(0x70000000)
+
+#define S3C64XX_PA_ONENAND0	(0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF	(0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+   (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1	(0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF	(0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF	(SZ_64M)
+
+#define S3C64XX_PA_NAND		(0x70200000)
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+#define S3C64XX_PA_MODEM	(0x74108000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
+
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
+/* place VICs close together */
+#define VA_VIC0			(S3C_VA_IRQ + 0x00)
+#define VA_VIC1			(S3C_VA_IRQ + 0x10000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
+#define S3C_PA_ONENAND		S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF	S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF	S3C64XX_SZ_ONENAND0_BUF
+#define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+#define S3C_PA_RTC		S3C64XX_PA_RTC
+#define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
+
+#define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
index a3ac84a..a3ac84a 100644
--- a/arch/arm/mach-s3c6400/include/mach/memory.h
+++ b/arch/arm/mach-s3c64xx/include/mach/memory.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
new file mode 100644
index 0000000..5ef0bb6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pll.h
@@ -0,0 +1,45 @@
+/* arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S3C6400_PLL_MDIV_SHIFT	(16)
+#define S3C6400_PLL_PDIV_SHIFT	(8)
+#define S3C6400_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+#include <plat/pll6553x.h>
+
+static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
+{
+	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
+}
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
new file mode 100644
index 0000000..1e9f20f
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
index b25bede..b25bede 100644
--- a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
new file mode 100644
index 0000000..0114eb0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -0,0 +1,157 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
+#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
+#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
+#define S3C_APLL_CON		S3C_CLKREG(0x0C)
+#define S3C_MPLL_CON		S3C_CLKREG(0x10)
+#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
+#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
+#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
+#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
+#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
+#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
+#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
+#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
+#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
+#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
+#define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
+
+/* CLKDIV0 */
+#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
+#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
+#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
+#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
+#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
+#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
+#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
+#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
+
+#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
+#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
+
+/* HCLK GATE Registers */
+#define S3C_CLKCON_HCLK_3DSE	(1<<31)
+#define S3C_CLKCON_HCLK_UHOST	(1<<29)
+#define S3C_CLKCON_HCLK_SECUR	(1<<28)
+#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
+#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
+#define S3C_CLKCON_HCLK_IROM	(1<<25)
+#define S3C_CLKCON_HCLK_DDR1	(1<<24)
+#define S3C_CLKCON_HCLK_DDR0	(1<<23)
+#define S3C_CLKCON_HCLK_MEM1	(1<<22)
+#define S3C_CLKCON_HCLK_MEM0	(1<<21)
+#define S3C_CLKCON_HCLK_USB	(1<<20)
+#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
+#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
+#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
+#define S3C_CLKCON_HCLK_MDP	(1<<16)
+#define S3C_CLKCON_HCLK_DHOST	(1<<15)
+#define S3C_CLKCON_HCLK_IHOST	(1<<14)
+#define S3C_CLKCON_HCLK_DMA1	(1<<13)
+#define S3C_CLKCON_HCLK_DMA0	(1<<12)
+#define S3C_CLKCON_HCLK_JPEG	(1<<11)
+#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
+#define S3C_CLKCON_HCLK_SCALER	(1<<9)
+#define S3C_CLKCON_HCLK_2D	(1<<8)
+#define S3C_CLKCON_HCLK_TV	(1<<7)
+#define S3C_CLKCON_HCLK_POST0	(1<<5)
+#define S3C_CLKCON_HCLK_ROT	(1<<4)
+#define S3C_CLKCON_HCLK_LCD	(1<<3)
+#define S3C_CLKCON_HCLK_TZIC	(1<<2)
+#define S3C_CLKCON_HCLK_INTC	(1<<1)
+#define S3C_CLKCON_HCLK_MFC	(1<<0)
+
+/* PCLK GATE Registers */
+#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
+#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
+#define S3C_CLKCON_PCLK_SKEY		(1<<24)
+#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
+#define S3C_CLKCON_PCLK_SPI1		(1<<22)
+#define S3C_CLKCON_PCLK_SPI0		(1<<21)
+#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
+#define S3C_CLKCON_PCLK_HSITX		(1<<19)
+#define S3C_CLKCON_PCLK_GPIO		(1<<18)
+#define S3C_CLKCON_PCLK_IIC		(1<<17)
+#define S3C_CLKCON_PCLK_IIS1		(1<<16)
+#define S3C_CLKCON_PCLK_IIS0		(1<<15)
+#define S3C_CLKCON_PCLK_AC97		(1<<14)
+#define S3C_CLKCON_PCLK_TZPC		(1<<13)
+#define S3C_CLKCON_PCLK_TSADC		(1<<12)
+#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
+#define S3C_CLKCON_PCLK_IRDA		(1<<10)
+#define S3C_CLKCON_PCLK_PCM1		(1<<9)
+#define S3C_CLKCON_PCLK_PCM0		(1<<8)
+#define S3C_CLKCON_PCLK_PWM		(1<<7)
+#define S3C_CLKCON_PCLK_RTC		(1<<6)
+#define S3C_CLKCON_PCLK_WDT		(1<<5)
+#define S3C_CLKCON_PCLK_UART3		(1<<4)
+#define S3C_CLKCON_PCLK_UART2		(1<<3)
+#define S3C_CLKCON_PCLK_UART1		(1<<2)
+#define S3C_CLKCON_PCLK_UART0		(1<<1)
+#define S3C_CLKCON_PCLK_MFC		(1<<0)
+
+/* SCLK GATE Registers */
+#define S3C_CLKCON_SCLK_UHOST		(1<<30)
+#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
+#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
+#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
+#define S3C_CLKCON_SCLK_MMC2		(1<<26)
+#define S3C_CLKCON_SCLK_MMC1		(1<<25)
+#define S3C_CLKCON_SCLK_MMC0		(1<<24)
+#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
+#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
+#define S3C_CLKCON_SCLK_SPI1		(1<<21)
+#define S3C_CLKCON_SCLK_SPI0		(1<<20)
+#define S3C_CLKCON_SCLK_DAC27		(1<<19)
+#define S3C_CLKCON_SCLK_TV27		(1<<18)
+#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
+#define S3C_CLKCON_SCLK_SCALER		(1<<16)
+#define S3C_CLKCON_SCLK_LCD27		(1<<15)
+#define S3C_CLKCON_SCLK_LCD		(1<<14)
+#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
+#define S3C6410_CLKCON_FIMC		(1<<13)
+#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
+#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
+#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
+#define S3C_CLKCON_SCLK_POST0		(1<<10)
+#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
+#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
+#define S3C_CLKCON_SCLK_SECUR		(1<<7)
+#define S3C_CLKCON_SCLK_IRDA		(1<<6)
+#define S3C_CLKCON_SCLK_UART		(1<<5)
+#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
+#define S3C_CLKCON_SCLK_MFC		(1<<3)
+#define S3C_CLKCON_SCLK_CAM		(1<<2)
+#define S3C_CLKCON_SCLK_JPEG		(1<<1)
+
+/* CLKSRC */
+
+#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
+#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
+#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
+#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
+#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
+#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
+#define S3C6400_CLKSRC_MFC		(1 << 4)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
index f566115..f566115 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
index 82342f6..82342f6 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
index 81f7f6e..81f7f6e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
index bcce68a..bcce68a 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
index 49f7759..49f7759 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
new file mode 100644
index 0000000..756731b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
@@ -0,0 +1,59 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
+ *
+ * Copyright 2009 Andy Green <andy@warmcat.com>
+ *
+ * S3C64XX SROM definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_SROM_H
+#define __PLAT_REGS_SROM_H __FILE__
+
+#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
+
+#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
+#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
+#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
+#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
+#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
+#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
+#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
+
+/*
+ * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
+ */
+
+#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
+#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
+#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
+#define S3C64XX_SROM_BW__CS_MASK 0xf
+
+#define S3C64XX_SROM_BW__NCS0__SHIFT	0
+#define S3C64XX_SROM_BW__NCS1__SHIFT	4
+#define S3C64XX_SROM_BW__NCS2__SHIFT	8
+#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
+#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
+
+/*
+ * applies to same to BCS0 - BCS4
+ */
+
+#define S3C64XX_SROM_BCX__PMC__SHIFT	0
+#define S3C64XX_SROM_BCX__PMC__MASK	3
+#define S3C64XX_SROM_BCX__TACP__SHIFT	4
+#define S3C64XX_SROM_BCX__TACP__MASK	0xf
+#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
+#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
+#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
+#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
+#define S3C64XX_SROM_BCX__TACC__SHIFT	16
+#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
+#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
+#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
+#define S3C64XX_SROM_BCX__TACS__SHIFT	28
+#define S3C64XX_SROM_BCX__TACS__MASK	0xf
+
+#endif /* _PLAT_REGS_SROM_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
index 69b78d9..69b78d9 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
index 270d96a..270d96a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
new file mode 100644
index 0000000..f86958d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S3C6400 related SoCs */
+
+extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c6400_setup_clocks(void);
+
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern  int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#define s3c6400_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_init_uarts NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
new file mode 100644
index 0000000..24f1141
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
+ *
+ * Copyright 2008 Openmoko,  Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Header file for s3c6410 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern  int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#define s3c6410_init_uarts s3c6400_common_init_uarts
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_init_uarts NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
new file mode 100644
index 0000000..9d0c43b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_CLKS_H
+#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
+
+#define S3C64XX_SPI_SRCCLK_PCLK		0
+#define S3C64XX_SPI_SRCCLK_SPIBUS	1
+#define S3C64XX_SPI_SRCCLK_48M		2
+
+#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index 2e58cb7..2e58cb7 100644
--- a/arch/arm/mach-s3c6400/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
new file mode 100644
index 0000000..ebe18a9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
new file mode 100644
index 0000000..fb2e8cd
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
index c6a82a2..c6a82a2 100644
--- a/arch/arm/mach-s3c6400/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..7411ef3
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
new file mode 100644
index 0000000..5682d6a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -0,0 +1,213 @@
+/* arch/arm/plat-s3c64xx/irq-eint.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S3C64XX_EINT0MASK);
+	mask &= ~eint_irq_to_bit(irq);
+	__raw_writel(mask, S3C64XX_EINT0MASK);
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = eint_offset(irq);
+	int pin, pin_val;
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+	void __iomem *reg;
+
+	if (offs > 27)
+		return -EINVAL;
+
+	if (offs <= 15)
+		reg = S3C64XX_EINT0CON0;
+	else
+		reg = S3C64XX_EINT0CON1;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -1;
+	}
+
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(reg);
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, reg);
+
+	/* set the GPIO pin appropriately */
+
+	if (offs < 16) {
+		pin = S3C64XX_GPN(offs);
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
+		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
+
+	s3c_gpio_cfgpin(pin, pin_val);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "s3c-eint",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S3C64XX_EINT0PEND);
+	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(0, 3);
+}
+
+static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(4, 11);
+}
+
+static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(12, 19);
+}
+
+static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(20, 27);
+}
+
+static int __init s3c64xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
+	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
+	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
+	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
+
+	return 0;
+}
+
+arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
new file mode 100644
index 0000000..da1bec6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -0,0 +1,111 @@
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <mach/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C64XX_PRIORITY),
+	SAVE_ITEM(S3C64XX_EINT0CON0),
+	SAVE_ITEM(S3C64XX_EINT0CON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+	SAVE_ITEM(S3C64XX_EINT0MASK),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+	u32	fltcon;
+	u32	con;
+	u32	mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+	return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+	.suspend = s3c64xx_irq_pm_suspend,
+	.resume	 = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
new file mode 100644
index 0000000..67a145d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/irq.c
@@ -0,0 +1,69 @@
+/* arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+#include <plat/cpu.h>
+
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0);
+	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0);
+
+	/* add the timer sub-irqs */
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
new file mode 100644
index 0000000..4a0bb24
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -0,0 +1,245 @@
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000	(0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV	(0x30000000)
+
+#define ANW6410_EN_DM9000	(1<<11)
+#define ANW6410_EN_LCD		(1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 1);
+		gpio_direction_output(S3C64XX_GPF(4), 1);
+	} else {
+		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+		gpio_direction_output(S3C64XX_GPF(1), 0);
+		gpio_direction_output(S3C64XX_GPF(4), 0);
+	}
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+	.set_power	= anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &anw6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+	[0] = {
+		.start = ANW6410_PA_DM9000,
+		.end   = ANW6410_PA_DM9000 + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = ANW6410_PA_DM9000 + 4,
+		.end   = ANW6410_PA_DM9000 + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = IRQ_EINT(15),
+		.end   = IRQ_EINT(15),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	/* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+	.name	= "dm9000",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
+	.resource	= anw6410_dm9000_resource,
+	.dev	= {
+		.platform_data  = &anw6410_dm9000_pdata,
+	},
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
+		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+	&s3c_device_fb,
+	&anw6410_lcd_powerdev,
+	&anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+	anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+	s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+	gpio_request(S3C64XX_GPF(1), "panel power");
+	gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+	anw6410_dm9000_enable();
+
+	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= anw6410_map_io,
+	.init_machine	= anw6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
new file mode 100644
index 0000000..187441a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(struct device *dev, int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_nand_set_platdata(&hmt_nand_info);
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
new file mode 100644
index 0000000..bf65747
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -0,0 +1,107 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+	/* REVISIT: NCP uses only serial 1, 2 */
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct map_desc ncp_iodesc[] __initdata = {};
+
+static void __init ncp_map_io(void)
+{
+	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+
+	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+	/* Maintainer: Samsung Electronics */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= ncp_map_io,
+	.init_machine	= ncp_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
new file mode 100644
index 0000000..028d080
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -0,0 +1,363 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/serial_core.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/hwmon.h>
+#include <plat/regs-serial.h>
+#include <plat/udc-hs.h>
+#include <plat/usb-control.h>
+#include <plat/sdhci.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static void smartq_usb_host_powercontrol(int port, int to)
+{
+	pr_debug("%s(%d, %d)\n", __func__, port, to);
+
+	if (port == 0) {
+		gpio_set_value(S3C64XX_GPL(0), to);
+		gpio_set_value(S3C64XX_GPL(1), to);
+	}
+}
+
+static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
+{
+	struct s3c2410_hcd_info *info = pw;
+
+	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
+		pr_debug("%s: over-current irq (oc detected)\n", __func__);
+		s3c2410_usb_report_oc(info, 3);
+	} else {
+		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
+		s3c2410_usb_report_oc(info, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+	int ret;
+
+	/* This isn't present on a SmartQ 5 board */
+	if (machine_is_smartq5())
+		return;
+
+	if (on) {
+		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
+				  smartq_usb_host_ocirq, IRQF_DISABLED |
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "USB host overcurrent", info);
+		if (ret != 0)
+			pr_err("failed to request usb oc irq: %d\n", ret);
+	} else {
+		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
+	}
+}
+
+static struct s3c2410_hcd_info smartq_usb_host_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+	.port[1]	= {
+		.flags	= 0
+	},
+
+	.power_control	= smartq_usb_host_powercontrol,
+	.enable_oc	= smartq_usb_host_enableoc,
+};
+
+static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
+	.gpio_vbus		= S3C64XX_GPL(9),
+	.gpio_pullup		= -1,
+	.gpio_vbus_inverted	= true,
+};
+
+static struct platform_device smartq_usb_otg_vbus_dev = {
+	.name			= "gpio-vbus",
+	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
+};
+
+static int __init smartq_bl_init(struct device *dev)
+{
+    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
+
+    return 0;
+}
+
+static struct platform_pwm_backlight_data smartq_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+	.pwm_period_ns	= 1000000000 / (1000 * 20),
+	.init		= smartq_bl_init,
+};
+
+static struct platform_device smartq_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &smartq_backlight_data,
+	},
+};
+
+static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
+	.delay			= 65535,
+	.presc			= 99,
+	.oversampling_shift	= 4,
+};
+
+static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
+	.max_width		= 4,
+	/*.broken_card_detection	= true,*/
+};
+
+static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
+	/* Battery voltage (?-4.2V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:battery-voltage",
+		.mult		= 3300,
+		.div		= 2048,
+	},
+	/* Reference voltage (1.2V) */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:reference-voltage",
+		.mult		= 3300,
+		.div		= 4096,
+	},
+};
+
+static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	gpio_direction_output(S3C64XX_GPM(3), power);
+}
+
+static struct plat_lcd_data smartq_lcd_power_data = {
+	.set_power	= smartq_lcd_power_set,
+};
+
+static struct platform_device smartq_lcd_power_device = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smartq_lcd_power_data,
+};
+
+
+static struct platform_device *smartq_devices[] __initdata = {
+	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
+	&s3c_device_hsmmc0,	/* ... then the external SD card */
+	&s3c_device_hsmmc2,
+	&s3c_device_adc,
+	&s3c_device_fb,
+	&s3c_device_hwmon,
+	&s3c_device_i2c0,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&s3c_device_timer[1],
+	&s3c_device_ts,
+	&s3c_device_usb_hsotg,
+	&smartq_backlight_device,
+	&smartq_lcd_power_device,
+	&smartq_usb_otg_vbus_dev,
+};
+
+static void __init smartq_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void smartq_power_off(void)
+{
+	gpio_direction_output(S3C64XX_GPK(15), 1);
+}
+
+static int __init smartq_power_off_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(15), "Power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK15\n", __func__);
+		return ret;
+	}
+
+	/* leave power on */
+	gpio_direction_output(S3C64XX_GPK(15), 0);
+
+
+	pm_power_off = smartq_power_off;
+
+	return ret;
+}
+
+static int __init smartq_usb_host_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL0\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL1\n", __func__);
+		goto err;
+	}
+
+	if (!machine_is_smartq5()) {
+		/* This isn't present on a SmartQ 5 board */
+		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
+		if (ret < 0) {
+			pr_err("%s: failed to get GPL10\n", __func__);
+			goto err2;
+		}
+	}
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPL(0), 0);
+	gpio_direction_output(S3C64XX_GPL(1), 0);
+	if (!machine_is_smartq5())
+		gpio_direction_input(S3C64XX_GPL(10));
+
+	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
+
+	return 0;
+
+err2:
+	gpio_free(S3C64XX_GPL(1));
+err:
+	gpio_free(S3C64XX_GPL(0));
+	return ret;
+}
+
+static int __init smartq_usb_otg_init(void)
+{
+	clk_xusbxti.rate = 12000000;
+
+	return 0;
+}
+
+static int __init smartq_wifi_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK1\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK2\n", __func__);
+		gpio_free(S3C64XX_GPK(1));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C64XX_GPK(1), 1);
+
+	/* reset device */
+	gpio_direction_output(S3C64XX_GPK(2), 0);
+	mdelay(100);
+	gpio_set_value(S3C64XX_GPK(2), 1);
+	gpio_direction_input(S3C64XX_GPK(2));
+
+	return 0;
+}
+
+static struct map_desc smartq_iodesc[] __initdata = {};
+void __init smartq_map_io(void)
+{
+	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+
+	smartq_lcd_mode_set();
+}
+
+void __init smartq_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
+	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+
+	WARN_ON(smartq_power_off_init());
+	WARN_ON(smartq_usb_host_init());
+	WARN_ON(smartq_usb_otg_init());
+	WARN_ON(smartq_wifi_init());
+
+	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.h b/arch/arm/mach-s3c64xx/mach-smartq.h
new file mode 100644
index 0000000..8e8b693
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smartq.h
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.h
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_SMARTQ_H
+#define __MACH_SMARTQ_H __FILE__
+
+#include <linux/init.h>
+
+extern void __init smartq_map_io(void);
+extern void __init smartq_machine_init(void);
+
+#endif /* __MACH_SMARTQ_H */
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
new file mode 100644
index 0000000..1d0326e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq5.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/s3c6410.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "mach-smartq.h"
+
+static void __init smartq5_lcd_setup_gpio(void)
+{
+	gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
+	gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
+	gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
+	gpio_request(S3C64XX_GPM(3), "LCD power");
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_direction_input(S3C64XX_GPM(1));
+	gpio_direction_input(S3C64XX_GPM(2));
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+}
+
+static struct i2c_gpio_platform_data smartq5_lcd_control = {
+	.sda_pin		= S3C64XX_GPM(2),
+	.scl_pin		= S3C64XX_GPM(1),
+};
+
+static struct platform_device smartq5_lcd_control_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq5_lcd_control,
+};
+
+static struct gpio_led smartq5_leds[] __initdata = {
+	{
+		.name			= "smartq5:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq5:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq5_led_data = {
+	.num_leds = ARRAY_SIZE(smartq5_leds),
+	.leds = smartq5_leds,
+};
+
+static struct platform_device smartq5_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq5_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq5_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ENTER,
+		.desc			= "Move",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq5_buttons_data  = {
+	.buttons	= smartq5_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
+};
+
+static struct platform_device smartq5_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq5_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq5_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 1000000000000ULL /
+				((40+1+216+800)*(10+1+35+480)*80),
+		.left_margin	= 40,
+		.right_margin	= 216,
+		.upper_margin	= 10,
+		.lower_margin	= 35,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smartq5_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VDEN,
+};
+
+static struct platform_device *smartq5_devices[] __initdata = {
+	&smartq5_leds_device,
+	&smartq5_buttons_device,
+	&smartq5_lcd_control_device,
+};
+
+static void __init smartq5_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq5_lcd_pdata);
+
+	smartq_machine_init();
+	smartq5_lcd_setup_gpio();
+
+	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
+}
+
+MACHINE_START(SMARTQ5, "SmartQ 5")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq5_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
new file mode 100644
index 0000000..e0bc78e
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq7.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/s3c6410.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "mach-smartq.h"
+
+static void __init smartq7_lcd_setup_gpio(void)
+{
+	gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
+	gpio_request(S3C64XX_GPM(3), "LCD power");
+	gpio_request(S3C64XX_GPM(4), "LCD power status");
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+	gpio_direction_input(S3C64XX_GPM(4));
+}
+
+static struct i2c_gpio_platform_data smartq7_lcd_control = {
+	.sda_pin		= S3C64XX_GPM(2),
+	.scl_pin		= S3C64XX_GPM(1),
+	.sda_is_open_drain	= 1,
+	.scl_is_open_drain	= 1,
+};
+
+static struct platform_device smartq7_lcd_control_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq7_lcd_control,
+};
+
+static struct gpio_led smartq7_leds[] __initdata = {
+	{
+		.name			= "smartq7:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq7:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq7_led_data = {
+	.num_leds = ARRAY_SIZE(smartq7_leds),
+	.leds = smartq7_leds,
+};
+
+static struct platform_device smartq7_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq7_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq7_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_FN,
+		.desc			= "Function",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(3),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(4),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_ENTER,
+		.desc			= "Enter",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ESC,
+		.desc			= "Cancel",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq7_buttons_data  = {
+	.buttons	= smartq7_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
+};
+
+static struct platform_device smartq7_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq7_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq7_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 1000000000000ULL /
+				((3+10+5+800)*(1+3+20+480)*80),
+		.left_margin	= 3,
+		.right_margin	= 5,
+		.upper_margin	= 1,
+		.lower_margin	= 20,
+		.hsync_len	= 10,
+		.vsync_len	= 3,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smartq7_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK,
+};
+
+static struct platform_device *smartq7_devices[] __initdata = {
+	&smartq7_leds_device,
+	&smartq7_buttons_device,
+	&smartq7_lcd_control_device,
+};
+
+static void __init smartq7_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq7_lcd_pdata);
+
+	smartq_machine_init();
+	smartq7_lcd_setup_gpio();
+
+	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
+}
+
+MACHINE_START(SMARTQ7, "SmartQ 7")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq7_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
new file mode 100644
index 0000000..5991667
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <mach/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+	&s3c_device_hsmmc1,
+	&s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1A), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6400_init_irq,
+	.map_io		= smdk6400_map_io,
+	.init_machine	= smdk6400_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
new file mode 100644
index 0000000..d9a0355
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -0,0 +1,681 @@
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+/* framebuffer and LCD setup. */
+
+/* GPF15 = LCD backlight control
+ * GPF13 => Panel power
+ * GPN5 = LCD nRESET signal
+ * PWM_TOUT1 => backlight brightness
+ */
+
+static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+		gpio_direction_output(S3C64XX_GPF(13), 1);
+		gpio_direction_output(S3C64XX_GPF(15), 1);
+
+		/* fire nRESET on power up */
+		gpio_direction_output(S3C64XX_GPN(5), 0);
+		msleep(10);
+		gpio_direction_output(S3C64XX_GPN(5), 1);
+		msleep(1);
+	} else {
+		gpio_direction_output(S3C64XX_GPF(15), 0);
+		gpio_direction_output(S3C64XX_GPF(13), 0);
+	}
+}
+
+static struct plat_lcd_data smdk6410_lcd_power_data = {
+	.set_power	= smdk6410_lcd_power_set,
+};
+
+static struct platform_device smdk6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win smdk6410_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smdk6410_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/*
+ * Configuring Ethernet on SMDK6410
+ *
+ * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
+ * The constant address below corresponds to nCS1
+ *
+ *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
+ *  2) CFG6 needs to be switched to "LAN9115" side
+ */
+
+static struct resource smdk6410_smsc911x_resources[] = {
+	[0] = {
+		.start = S3C64XX_PA_XM0CSN1,
+		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = S3C_EINT(10),
+		.end   = S3C_EINT(10),
+		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+	.name          = "smsc911x",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+	.resource      = &smdk6410_smsc911x_resources[0],
+	.dev = {
+		.platform_data = &smdk6410_smsc911x_pdata,
+	},
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+	.gpio = -EINVAL,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
+static struct map_desc smdk6410_iodesc[] = {};
+
+static struct platform_device *smdk6410_devices[] __initdata = {
+#ifdef CONFIG_SMDK6410_SD_CH0
+	&s3c_device_hsmmc0,
+#endif
+#ifdef CONFIG_SMDK6410_SD_CH1
+	&s3c_device_hsmmc1,
+#endif
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_ohci,
+	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iisv4,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
+	&smdk6410_lcd_powerdev,
+
+	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+};
+
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+	{
+		.supply = "vddarm",
+	}
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data smdk6410_vddarm = {
+	.constraints = {
+		.name = "PVDD_ARM",
+		.min_uV = 1000000,
+		.max_uV = 1300000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+	.consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data smdk6410_vddint = {
+	.constraints = {
+		.name = "PVDD_INT",
+		.min_uV = 1000000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data smdk6410_vddhi = {
+	.constraints = {
+		.name = "PVDD_HI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data smdk6410_vddpll = {
+	.constraints = {
+		.name = "PVDD_PLL",
+		.always_on = 1,
+	},
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data smdk6410_vdduh_mmc = {
+	.constraints = {
+		.name = "PVDD_UH/PVDD_MMC",
+		.always_on = 1,
+	},
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data smdk6410_vccmc3bt = {
+	.constraints = {
+		.name = "PVCCM3BT",
+		.always_on = 1,
+	},
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data smdk6410_vccm2mtv = {
+	.constraints = {
+		.name = "PVCCM2MTV",
+		.always_on = 1,
+	},
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data smdk6410_vddlcd = {
+	.constraints = {
+		.name = "PVDD_LCD",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data smdk6410_vddotgi = {
+	.constraints = {
+		.name = "PVDD_OTGI",
+		.always_on = 1,
+	},
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data smdk6410_vddotg = {
+	.constraints = {
+		.name = "PVDD_OTG",
+		.always_on = 1,
+	},
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data smdk6410_vddalive = {
+	.constraints = {
+		.name = "PVDD_ALIVE",
+		.always_on = 1,
+	},
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data smdk6410_vddaudio = {
+	.constraints = {
+		.name = "PVDD_AUDIO",
+		.always_on = 1,
+	},
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+	.constraints = {
+		.name = "PVDD_INT/PVDD_PLL",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.always_on = 1,
+		.apply_uV = 1,
+	},
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+	.constraints = {
+		.name = "PVDD_MEM",
+		.min_uV = 1800000,
+		.max_uV = 1800000,
+		.always_on = 1,
+		.state_mem = {
+			 .uV = 1800000,
+			 .mode = REGULATOR_MODE_NORMAL,
+			 .enabled = 1,
+		},
+		.initial_state = PM_SUSPEND_MEM,
+	},
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data wm8350_dcdc4_data = {
+	.constraints = {
+		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+		.min_uV = 3000000,
+		.max_uV = 3000000,
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+	.constraints = {
+		.name = "PVDD_OTGI/HPVDD/AVDD",
+		.min_uV = 1200000,
+		.max_uV = 1200000,
+		.apply_uV = 1,
+		.always_on = 1,
+	},
+};
+
+static struct {
+	int regulator;
+	struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
+	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
+	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
+	{ WM8350_DCDC_6, &smdk6410_vddarm },
+	{ WM8350_LDO_1, &smdk6410_vddalive },
+	{ WM8350_LDO_2, &smdk6410_vddotg },
+	{ WM8350_LDO_3, &smdk6410_vddlcd },
+	{ WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+	int i;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	/* Instantiate the regulators */
+	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+		wm8350_register_regulator(wm8350,
+					  wm1190_regulators[i].regulator,
+					  wm1190_regulators[i].initdata);
+
+	return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+	.init = smdk6410_wm8350_init,
+	.irq_high = 1,
+	.irq_base = IRQ_BOARD_START,
+};
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+	{
+		.name = "PMIC:red:power",
+		.gpio = GPIO_BOARD_START + 3,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
+	},
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+	.leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+	.name          = "leds-gpio",
+	.id            = -1,
+	.dev = {
+		.platform_data = &wm1192_pmic_led,
+	},
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+	int ret;
+
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+	ret = platform_device_register(&wm1192_pmic_led_dev);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+	return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+	.isink = 1,
+	.max_uA = 27554,
+};
+
+static struct regulator_init_data wm1192_dcdc3 = {
+	.constraints = {
+		.name = "PVDD_MEM/PVDD_GPS",
+		.always_on = 1,
+	},
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+	{ .supply = "DVDD", .dev_name = "0-001b", },   /* WM8580 */
+};
+
+static struct regulator_init_data wm1192_ldo1 = {
+	.constraints = {
+		.name = "PVDD_LCD/PVDD_EXT",
+		.always_on = 1,
+	},
+	.consumer_supplies = wm1192_ldo1_consumers,
+	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+	.name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+	.name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+	.pre_init = wm1192_pre_init,
+	.irq_base = IRQ_BOARD_START,
+
+	.backlight = &wm1192_backlight_pdata,
+	.dcdc = {
+		&smdk6410_vddarm,  /* DCDC1 */
+		&smdk6410_vddint,  /* DCDC2 */
+		&wm1192_dcdc3,
+	},
+	.gpio_base = GPIO_BOARD_START,
+	.ldo = {
+		 &wm1192_ldo1,        /* LDO1 */
+		 &smdk6410_vdduh_mmc, /* LDO2 */
+		 NULL,                /* LDO3 NC */
+		 &smdk6410_vddotgi,   /* LDO4 */
+		 &smdk6410_vddotg,    /* LDO5 */
+		 &smdk6410_vddhi,     /* LDO6 */
+		 &smdk6410_vddaudio,  /* LDO7 */
+		 &smdk6410_vccm2mtv,  /* LDO8 */
+		 &smdk6410_vddpll,    /* LDO9 */
+		 &smdk6410_vccmc3bt,  /* LDO10 */
+		 &smdk6410_vddalive,  /* LDO11 */
+	},
+	.status = {
+		&wm1192_led7_pdata,
+		&wm1192_led8_pdata,
+	},
+};
+#endif
+
+static struct i2c_board_info i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+	{ I2C_BOARD_INFO("wm8312", 0x34),
+	  .platform_data = &smdk6410_wm1192_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+	{ I2C_BOARD_INFO("wm8350", 0x1a),
+	  .platform_data = &smdk6410_wm8350_pdata,
+	  .irq = S3C_EINT(12),
+	},
+#endif
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+	/* set the LCD type */
+
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the lcd bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void __init smdk6410_machine_init(void)
+{
+	u32 cs1;
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+						   S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+}
+
+MACHINE_START(SMDK6410, "SMDK6410")
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smdk6410_map_io,
+	.init_machine	= smdk6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
new file mode 100644
index 0000000..79412f7
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -0,0 +1,193 @@
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <mach/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+	unsigned long flags;
+	u32 reg;
+
+	local_irq_save(flags);
+	reg = __raw_readl(S3C64XX_GPNCON);
+	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+	__raw_writel(reg, S3C64XX_GPNCON);
+
+	reg = __raw_readl(S3C64XX_GPNDAT);
+	reg &= ~(clear << 12);
+	reg |= set << 12;
+	__raw_writel(reg, S3C64XX_GPNDAT);
+
+	local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C_APLL_LOCK),
+	SAVE_ITEM(S3C_MPLL_LOCK),
+	SAVE_ITEM(S3C_EPLL_LOCK),
+	SAVE_ITEM(S3C_CLK_SRC),
+	SAVE_ITEM(S3C_CLK_DIV0),
+	SAVE_ITEM(S3C_CLK_DIV1),
+	SAVE_ITEM(S3C_CLK_DIV2),
+	SAVE_ITEM(S3C_CLK_OUT),
+	SAVE_ITEM(S3C_HCLK_GATE),
+	SAVE_ITEM(S3C_PCLK_GATE),
+	SAVE_ITEM(S3C_SCLK_GATE),
+	SAVE_ITEM(S3C_MEM0_GATE),
+
+	SAVE_ITEM(S3C_EPLL_CON1),
+	SAVE_ITEM(S3C_EPLL_CON0),
+
+	SAVE_ITEM(S3C64XX_MEM0DRVCON),
+	SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+	SAVE_ITEM(S3C_APLL_CON),
+	SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+	SAVE_ITEM(S3C64XX_AHB_CON0),
+	SAVE_ITEM(S3C64XX_AHB_CON1),
+	SAVE_ITEM(S3C64XX_AHB_CON2),
+	
+	SAVE_ITEM(S3C64XX_SPCON),
+
+	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+	SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S3C64XX_EINT_MASK);
+
+	s3c_pm_debug_smdkled(1 << 2, 0);
+
+	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+static void s3c64xx_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* set our standby method to sleep */
+
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	/* clear any old wakeup */
+
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+		     S3C64XX_WAKEUP_STAT);
+
+	/* set the LED state to 0110 over sleep */
+	s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+	/* we should never get past here */
+
+	panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
+	{ .irq = IRQ_HSMMC2,	.bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_BATF_DISABLE},
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_HSI_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+};
+
+static void s3c64xx_pm_prepare(void)
+{
+	samsung_sync_wakemask(S3C64XX_PWR_CFG,
+			      wake_irqs, ARRAY_SIZE(wake_irqs));
+
+	/* store address of resume. */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+	pm_cpu_prep = s3c64xx_pm_prepare;
+	pm_cpu_sleep = s3c64xx_cpu_suspend;
+	pm_uart_udivslot = 1;
+	return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
new file mode 100644
index 0000000..5e93fe3
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/mach-s3c64xx/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <mach/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+	/* setup SDHCI */
+
+	s3c6400_default_sdhci0();
+	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
+
+	s3c_onenand_setname("s3c6400-onenand");
+	s3c64xx_onenand1_setname("s3c6400-onenand");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+	/* VIC0 does not have IRQS 5..7,
+	 * VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+	.name	= "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+	.cls	= &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+	return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+	printk("S3C6400: Initialising architecture\n");
+
+	return sysdev_register(&s3c6400_sysdev);
+}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
new file mode 100644
index 0000000..014401c
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -0,0 +1,96 @@
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/adc.h>
+#include <plat/onenand-core.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
+
+void __init s3c6410_map_io(void)
+{
+	/* initialise device information early */
+	s3c6410_default_sdhci0();
+	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_adc.name	= "s3c64xx-adc";
+	s3c_device_nand.name = "s3c6400-nand";
+	s3c_onenand_setname("s3c6410-onenand");
+	s3c64xx_onenand1_setname("s3c6410-onenand");
+}
+
+void __init s3c6410_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
+	s3c6400_setup_clocks();
+}
+
+void __init s3c6410_init_irq(void)
+{
+	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
+	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
+}
+
+struct sysdev_class s3c6410_sysclass = {
+	.name	= "s3c6410-core",
+};
+
+static struct sys_device s3c6410_sysdev = {
+	.cls	= &s3c6410_sysclass,
+};
+
+static int __init s3c6410_core_init(void)
+{
+	return sysdev_class_register(&s3c6410_sysclass);
+}
+
+core_initcall(s3c6410_core_init);
+
+int __init s3c6410_init(void)
+{
+	printk("S3C6410: Initialising architecture\n");
+
+	return sysdev_register(&s3c6410_sysdev);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 8e28e44..8e28e44 100644
--- a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
new file mode 100644
index 0000000..d1b11e6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 0 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
+	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
+	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
new file mode 100644
index 0000000..2dce57d
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Base S3C64XX I2C bus 1 gpio configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
+	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
+	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index a58c0cc..a58c0cc 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
new file mode 100644
index 0000000..1a94203
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c64xx_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "mmc_bus",
+	/* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
new file mode 100644
index 0000000..b2ef443
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -0,0 +1,144 @@
+/* linux/arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * Save enough processor state to allow the restart of the pm.c
+	 * code after resume.
+	 *
+	 * entry:
+	 *	r0 = pointer to the save block
+	*/
+
+ENTRY(s3c_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+
+	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
+
+	@@ save our state to ram
+	bl	s3c_pm_cb_flushcache
+
+	@@ call final suspend code
+	ldr	r0, =pm_cpu_sleep
+	ldr	pc, [r0]
+	
+	@@ return to the caller, after the MMU is turned on.
+	@@ restore the last bits of the stack and return.
+resume_with_mmu:
+	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
+
+	.data
+
+	/* the next bit is code, but it requires easy access to the
+	 * s3c_sleep_save_phys data before the MMU is switched on, so
+	 * we store the code that needs this variable in the .data where
+	 * the value can be written to (the .text segment is RO).
+	*/
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* Sleep magic, the word before the resume entry point so that the
+	 * bootloader can check for a resumeable image. */
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_reusme
+	 *
+	 * This is the entry point, stored by whatever method the bootloader
+	 * requires to get the kernel runnign again. This code expects to be
+	 * entered with no caches live and the MMU disabled. It will then
+	 * restore the MMU and other basic CP registers saved and restart
+	 * the kernel C code to finish the resume code.
+	*/
+
+ENTRY(s3c_cpu_resume)
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	ldr	r2, =LL_UART		/* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+	 * as the uboot version supplied resets these to inputs during the
+	 * resume checks.
+	*/
+
+	ldr	r3, =S3C64XX_PA_GPIO
+	ldr	r0, [ r3, #S3C64XX_GPNCON ]
+	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+	str	r0, [ r3, #S3C64XX_GPNCON ]
+
+	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
+	bic	r0, r0, #0xf << 12			@ GPN12..15
+	orr	r0, r0, #1 << 15			@ GPN15
+	str	r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+	 * are thoroughly cleaned just in case the bootloader didn't do it
+	 * for us. */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
+	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
+
+	ldr	r0, s3c_sleep_save_phys
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+
+	mov	r0, #0			@ restore copro access controls
+	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
+	nop
+	mov	pc, r2				/* jump back */
+
+	.end
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
new file mode 100644
index 0000000..f066fae
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -0,0 +1,26 @@
+# arch/arm/mach-s5p6440/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P6440
+
+config CPU_S5P6440
+	bool
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6440 CPU support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	select SAMSUNG_DEV_TS
+	select SAMSUNG_DEV_ADC
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
+	help
+	  Machine support for the Samsung SMDK6440
+
+endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
new file mode 100644
index 0000000..be3c53a
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6440/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6440 system
+
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
+obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p6440/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6440/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
new file mode 100644
index 0000000..ca6e48d
--- /dev/null
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -0,0 +1,846 @@
+/* linux/arch/arm/mach-s5p6440/clock.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+#include <plat/pll.h>
+#include <plat/s5p6440.h>
+
+/* APLL Mux output clock */
+static struct clksrc_clk clk_mout_apll = {
+	.clk    = {
+		.name           = "mout_apll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_apll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static int s5p6440_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+static unsigned long s5p6440_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p6440_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk    = {
+		.name           = "mout_epll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_epll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name           = "mout_mpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
+};
+
+static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+		}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_clkarm_ops = {
+	.get_rate	= s5p6440_armclk_get_rate,
+	.set_rate	= s5p6440_armclk_set_rate,
+	.round_rate	= s5p6440_armclk_round_rate,
+};
+
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name	= "armclk",
+		.id	= 1,
+		.parent	= &clk_mout_apll.clk,
+		.ops	= &s5p6440_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name	= "dout_mpll",
+		.id	= -1,
+		.parent	= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name	= "clk_hclk",
+		.id	= -1,
+		.parent	= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name	= "clk_pclk",
+		.id	= -1,
+		.parent	= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
+};
+
+static struct clk *clkset_hclklow_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_hclklow = {
+	.sources	= clkset_hclklow_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclklow_list),
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk = {
+		.name	= "hclk_low",
+		.id	= -1,
+	},
+	.sources	= &clkset_hclklow,
+	.reg_src	= { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name	= "pclk_low",
+		.id	= -1,
+		.parent	= &clk_hclk_low.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P_OTHERS);
+	if (enable)
+		val |= S5P_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
+}
+
+static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
+}
+
+static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
+}
+
+static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
+}
+
+static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
+}
+
+static int s5p6440_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_mem_ctrl,
+		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p6440_sclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
+	}, {
+		.name    	= "otg",
+		.id	   	= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
+	}, {
+		.name    	= "post",
+		.id	   	= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable  	= s5p6440_hclk0_ctrl,
+		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "hclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "pclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "etm",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dsim",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "gps",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "pcm",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "irom",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "2d",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_group1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 0,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "spi_epll",
+			.id		= 1,
+			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_post",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p6440_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p6440_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
+	},
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+	unsigned long epll;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned int ptr;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+	clk_fout_epll.enable = s5p6440_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	clk_48m.enable = s5p6440_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
+				__raw_readl(S5P_EPLL_CON_K));
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
+
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
new file mode 100644
index 0000000..b2fe6a5
--- /dev/null
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s5p6440/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+
+static void s5p6440_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P_PWR_CFG);
+		val &= ~(0x3<<5);
+		val |= (0x1<<5);
+		__raw_writel(val, S5P_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/* s5p6440_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_device_adc.name	= "s3c64xx-adc";
+}
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p6440_sysclass = {
+	.name	= "s5p6440-core",
+};
+
+static struct sys_device s5p6440_sysdev = {
+	.cls	= &s5p6440_sysclass,
+};
+
+static int __init s5p6440_core_init(void)
+{
+	return sysdev_class_register(&s5p6440_sysclass);
+}
+
+core_initcall(s5p6440_core_init);
+
+int __init s5p6440_init(void)
+{
+	printk(KERN_INFO "S5P6440: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6440_idle;
+
+	return sysdev_register(&s5p6440_sysdev);
+}
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
new file mode 100644
index 0000000..0c53679
--- /dev/null
+++ b/arch/arm/mach-s5p6440/dev-audio.c
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s5p6440/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct resource s5p6440_iis0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_I2S,
+		.end   = S5P6440_PA_I2S + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
+	.resource	  = s5p6440_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_PCM,
+		.end   = S5P6440_PA_PCM + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	  = s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
new file mode 100644
index 0000000..0a30280
--- /dev/null
+++ b/arch/arm/mach-s5p6440/dev-spi.c
@@ -0,0 +1,176 @@
+/* linux/arch/arm/mach-s5p6440/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5P6440_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P6440_SPI_SRCCLK_SCLK] = "spi_epll",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p6440_spi0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_SPI0,
+		.end   = S5P6440_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio = s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p6440_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6440_spi0_resource),
+	.resource	  = s5p6440_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_spi0_pdata,
+	},
+};
+
+static struct resource s5p6440_spi1_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_SPI1,
+		.end   = S5P6440_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio = s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 15,
+};
+
+struct platform_device s5p6440_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6440_spi1_resource),
+	.resource	  = s5p6440_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_spi1_pdata,
+	},
+};
+
+void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5p6440_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5p6440_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p6440/dma.c
new file mode 100644
index 0000000..07606ad
--- /dev/null
+++ b/arch/arm/mach-s5p6440/dma.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6440_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6440_PA_PDMA,
+		.end    = S5P6440_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA0,
+		.end	= IRQ_DMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_MAX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_MAX,
+		[17] = DMACH_MAX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_MAX,
+		[23] = DMACH_MAX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MAX,
+		[28] = DMACH_MAX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6440_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
+	.resource	= s5p6440_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6440_dmacs[] __initdata = {
+	&s5p6440_device_pdma,
+};
+
+static int __init s5p6440_dma_init(void)
+{
+	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6440_dma_init);
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
new file mode 100644
index 0000000..92efc05
--- /dev/null
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -0,0 +1,342 @@
+/* arch/arm/mach-s5p6440/gpio.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * 		http://www.samsung.com/
+ *
+ * S5P6440 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* GPIO bank summary:
+*
+* Bank	GPIOs	Style	SlpCon	ExtInt Group
+* A	6	4Bit	Yes	1
+* B	7	4Bit	Yes	1
+* C	8	4Bit	Yes	2
+* F	2	2Bit	Yes	4 [1]
+* G	7	4Bit	Yes	5
+* H	10	4Bit[2]	Yes	6
+* I	16	2Bit	Yes	None
+* J	12	2Bit	Yes	None
+* N	16	2Bit	No	IRQ_EINT
+* P	8	2Bit	Yes	8
+* R	15	4Bit[2]	Yes	8
+*
+* [1] BANKF pins 14,15 do not form part of the external interrupt sources
+* [2] BANK has two control registers, GPxCON0 and GPxCON1
+*/
+
+static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+					     unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+					      unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	unsigned long flags;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	s3c_gpio_lock(chip, flags);
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	s3c_gpio_unlock(chip, flags);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0,
+	}, {
+		.cfg_eint	= 7,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
+	}, {
+		.cfg_eint	= 0,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 2,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+	{
+		.base	= S5P6440_GPA_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P6440_GPB_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P6440_GPC_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6440_GPG_BASE,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+	{
+		.base	= S5P6440_GPH_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P6440_GPR_BASE + 0x4,
+		.config	= &s5p6440_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+	{
+		.base	= S5P6440_GPF_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P6440_GPI_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P6440_GPJ_BASE,
+		.config	= &s5p6440_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P6440_GPN_BASE,
+		.config	= &s5p6440_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P6440_GPP_BASE,
+		.config	= &s5p6440_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+};
+
+void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull	= s3c_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull	= s3c_gpio_getpull_updown;
+	}
+}
+
+static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+						int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_output =
+					s5p6440_gpiolib_rbank_4bit2_output;
+		s3c_gpiolib_add(chip);
+	}
+}
+
+static int __init s5p6440_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
+	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+
+	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
+				ARRAY_SIZE(s5p6440_gpio_cfgs));
+
+	for (; nr_chips > 0; nr_chips--, chips++)
+		s3c_gpiolib_add(chips);
+
+	samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+				ARRAY_SIZE(s5p6440_gpio_4bit));
+
+	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
+				ARRAY_SIZE(gpio_rbank_4bit2));
+
+	return 0;
+}
+arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
new file mode 100644
index 0000000..1347d7f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, rtmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p6440/include/mach/dma.h
new file mode 100644
index 0000000..81209eb
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
new file mode 100644
index 0000000..e65f1b9
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6440
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
new file mode 100644
index 0000000..2178383
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/gpio.h
@@ -0,0 +1,80 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+#define S5P6440_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6440_GPIO_A_START = 0,
+	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+/* S5P6440 GPIO number definitions. */
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+/* the end of the S5P6440 specific gpios */
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S3C_GPIO_END		S5P6440_GPIO_END
+
+/* define the number of gpios we need to the one after the GPR() range */
+#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h
new file mode 100644
index 0000000..be8b26e
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
new file mode 100644
index 0000000..fa2d69c
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5p6440/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S3C64XX based
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
new file mode 100644
index 0000000..911854d
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -0,0 +1,118 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_S5P_IRQS_H
+#define __ASM_ARCH_S5P_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIC1		S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)
+#define IRQ_POST0		S5P_IRQ_VIC0(9)
+#define IRQ_2D			S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_WDT			S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
+#define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_UART0		S5P_IRQ_VIC1(5)
+#define IRQ_UART1		S5P_IRQ_VIC1(6)
+#define IRQ_UART2		S5P_IRQ_VIC1(7)
+#define IRQ_UART3		S5P_IRQ_VIC1(8)
+#define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_SPI0		S5P_IRQ_VIC1(16)
+#define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_IIC			S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
+#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
+#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
+#define IRQ_PMUIRQ		S5P_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S5P_IRQ_VIC1(26)
+#define IRQ_DSI			S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
+#define IRQ_TSI			S5P_IRQ_VIC1(29)
+#define IRQ_PENDN		S5P_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S5P_IRQ_VIC1(31)
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2		(0xf0000000)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR	(11)
+
+#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_S5P_IRQS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
new file mode 100644
index 0000000..44011b9
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/map.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6440_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
+
+#define S5P6440_PA_SYSCON	(0xE0100000)
+#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
+#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
+
+#define S5P6440_PA_GPIO		(0xE0308000)
+#define S5P_PA_GPIO		S5P6440_PA_GPIO
+
+#define S5P6440_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6440_PA_VIC0
+
+#define S5P6440_PA_PDMA		0xE9000000
+
+#define S5P6440_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6440_PA_VIC1
+
+#define S5P6440_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6440_PA_TIMER
+
+#define S5P6440_PA_RTC		(0xEA100000)
+#define S5P_PA_RTC		S5P6440_PA_RTC
+
+#define S5P6440_PA_WDT		(0xEA200000)
+#define S5P_PA_WDT		S5P6440_PA_WDT
+
+#define S5P6440_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+
+#define S5P6440_PA_SPI0		0xEC400000
+#define S5P6440_PA_SPI1		0xEC500000
+
+#define S5P6440_PA_HSOTG	(0xED100000)
+
+#define S5P6440_PA_HSMMC0	(0xED800000)
+#define S5P6440_PA_HSMMC1	(0xED900000)
+#define S5P6440_PA_HSMMC2	(0xEDA00000)
+
+#define S5P6440_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
+
+/* I2S */
+#define S5P6440_PA_I2S		0xF2000000
+
+/* PCM */
+#define S5P6440_PA_PCM		0xF2100000
+
+#define S5P6440_PA_ADC		(0xF3000000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6440_PA_UART
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_WDT		S5P6440_PA_WDT
+
+#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h
new file mode 100644
index 0000000..d62910c
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
new file mode 100644
index 0000000..6a2a02f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5P6440 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return 0;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK 0
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
new file mode 100644
index 0000000..c783ecc
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
+#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
+#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
+#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
+#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
+#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
+#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
+#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
+#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
+#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
+#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
+#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
+#define S5P_SWRESET		S5P_CLKREG(0x114)
+#define S5P_SYS_ID		S5P_CLKREG(0x118)
+#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
+#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
+#define S5P_PWR_CFG		S5P_CLKREG(0x804)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
+#define S5P_STOP_CFG		S5P_CLKREG(0x814)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
+#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
+#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
+#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
+#define S5P_OTHERS		S5P_CLKREG(0x900)
+#define S5P_RST_STAT		S5P_CLKREG(0x904)
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
+#define S5P_SLPEN		S5P_CLKREG(0x930)
+#define S5P_INFORM0		S5P_CLKREG(0xA00)
+#define S5P_INFORM1		S5P_CLKREG(0xA04)
+#define S5P_INFORM2		S5P_CLKREG(0xA08)
+#define S5P_INFORM3		S5P_CLKREG(0xA0C)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
+#define S5P_CLKDIV0_PCLK_SHIFT		(12)
+#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
+#define S5P_CLKDIV0_HCLK_SHIFT		(8)
+#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
+#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
+#define S5P_CLKDIV0_ARM_SHIFT		(0)
+
+/* CLKDIV3 */
+#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
+#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
+#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
+#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
+
+/* HCLK0 GATE Registers */
+#define S5P_CLKCON_HCLK0_USB		(1<<20)
+#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
+#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
+#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
+#define S5P_CLKCON_HCLK0_POST0		(1<<5)
+
+/* HCLK1 GATE Registers */
+#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
+
+/* PCLK GATE Registers */
+#define S5P_CLKCON_PCLK_IIS2		(1<<26)
+#define S5P_CLKCON_PCLK_SPI1		(1<<22)
+#define S5P_CLKCON_PCLK_SPI0		(1<<21)
+#define S5P_CLKCON_PCLK_GPIO		(1<<18)
+#define S5P_CLKCON_PCLK_IIC0		(1<<17)
+#define S5P_CLKCON_PCLK_TSADC		(1<<12)
+#define S5P_CLKCON_PCLK_PWM		(1<<7)
+#define S5P_CLKCON_PCLK_RTC		(1<<6)
+#define S5P_CLKCON_PCLK_WDT		(1<<5)
+#define S5P_CLKCON_PCLK_UART3		(1<<4)
+#define S5P_CLKCON_PCLK_UART2		(1<<3)
+#define S5P_CLKCON_PCLK_UART1		(1<<2)
+#define S5P_CLKCON_PCLK_UART0		(1<<1)
+
+/* SCLK0 GATE Registers */
+#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
+#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
+#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
+#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
+#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
+#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
+#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
+#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
+#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
+#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
+#define S5P_CLKCON_SCLK0_UART		(1<<5)
+
+/* SCLK1 GATE Registers */
+
+/* MEM0 GATE Registers */
+#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
+
+/*OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
+#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
+
+/* Compatibility defines */
+#define ARM_CLK_DIV			S5P_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
new file mode 100644
index 0000000..82ff753
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
+#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
+#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
+#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
+#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
+
+/* for LCD */
+#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
+#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
+
+/* These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP,
+ * useful for others set of GPIO's (4 bit)
+ */
+#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ * */
+#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
new file mode 100644
index 0000000..a961f4b
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
new file mode 100644
index 0000000..5fbca50
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5P6440_PLAT_SPI_CLKS_H
+#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
+
+#define S5P6440_SPI_SRCCLK_PCLK		0
+#define S5P6440_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5P6440_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
new file mode 100644
index 0000000..d2dd817
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/system.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
new file mode 100644
index 0000000..2f25c7f
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
new file mode 100644
index 0000000..fb2e8cd
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
new file mode 100644
index 0000000..7c1f600
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
new file mode 100644
index 0000000..16df257
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
new file mode 100644
index 0000000..a1f3727
--- /dev/null
+++ b/arch/arm/mach-s5p6440/init.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-s5p6440/init.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6440 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6440_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
new file mode 100644
index 0000000..8291fec
--- /dev/null
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -0,0 +1,125 @@
+/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s5p6440.h>
+#include <plat/clock.h>
+#include <mach/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6440_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = S5P6440_UCON_DEFAULT,
+		.ulcon	     = S5P6440_ULCON_DEFAULT,
+		.ufcon	     = S5P6440_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+	&s5p6440_device_iis,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6440_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_SYS_ID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+}
+
+static void __init smdk6440_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6440_init_irq,
+	.map_io		= smdk6440_map_io,
+	.init_machine	= smdk6440_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
new file mode 100644
index 0000000..69e8a66
--- /dev/null
+++ b/arch/arm/mach-s5p6440/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
new file mode 100644
index 0000000..0fd41b4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -0,0 +1,25 @@
+# arch/arm/mach-s5p6442/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5P6442
+
+if ARCH_S5P6442
+
+config CPU_S5P6442
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6442 CPU support
+
+config MACH_SMDK6442
+	bool "SMDK6442"
+	select CPU_S5P6442
+	help
+	  Machine support for Samsung SMDK6442
+
+endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
new file mode 100644
index 0000000..90a3d83
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6442/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P6442 system
+
+obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_CPU_S5P6442)	+= setup-i2c0.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
new file mode 100644
index 0000000..087e57f
--- /dev/null
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -0,0 +1,396 @@
+/* linux/arch/arm/mach-s5p6442/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6442.h>
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+/* Possible clock sources for ARM Mux */
+static struct clk *clk_src_arm_list[] = {
+	[1] = &clk_mout_apll.clk,
+	[2] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_arm = {
+	.sources	= clk_src_arm_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_arm_list),
+};
+
+static struct clksrc_clk clk_mout_arm = {
+	.clk	= {
+		.name		= "mout_arm",
+		.id		= -1,
+	},
+	.sources	= &clk_src_arm,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+};
+
+static struct clk clk_dout_a2m = {
+	.name		= "dout_a2m",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+};
+
+/* Possible clock sources for D0 Mux */
+static struct clk *clk_src_d0_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d0 = {
+	.sources	= clk_src_d0_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0_list),
+};
+
+static struct clksrc_clk clk_mout_d0 = {
+	.clk = {
+		.name		= "mout_d0",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
+};
+
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
+	.id		= -1,
+	.parent		= &clk_mout_arm.clk,
+};
+
+/* Possible clock sources for D0SYNC Mux */
+static struct clk *clk_src_d0sync_list[] = {
+	[1] = &clk_mout_d0.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d0sync = {
+	.sources	= clk_src_d0sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d0sync_list),
+};
+
+static struct clksrc_clk clk_mout_d0sync = {
+	.clk	= {
+		.name		= "mout_d0sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d0sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+};
+
+/* Possible clock sources for D1 Mux */
+static struct clk *clk_src_d1_list[] = {
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d1 = {
+	.sources	= clk_src_d1_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1_list),
+};
+
+static struct clksrc_clk clk_mout_d1 = {
+	.clk	= {
+		.name		= "mout_d1",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
+};
+
+/* Possible clock sources for D1SYNC Mux */
+static struct clk *clk_src_d1sync_list[] = {
+	[1] = &clk_mout_d1.clk,
+	[2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d1sync = {
+	.sources	= clk_src_d1sync_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_d1sync_list),
+};
+
+static struct clksrc_clk clk_mout_d1sync = {
+	.clk	= {
+		.name		= "mout_d1sync",
+		.id		= -1,
+	},
+	.sources	= &clk_src_d1sync,
+	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+};
+
+static struct clk clk_hclkd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.parent		= &clk_mout_d0sync.clk,
+};
+
+static struct clk clk_hclkd1 = {
+	.name		= "hclkd1",
+	.id		= -1,
+	.parent		= &clk_mout_d1sync.clk,
+};
+
+static struct clk clk_pclkd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.parent		= &clk_hclkd0,
+};
+
+static struct clk clk_pclkd1 = {
+	.name		= "pclkd1",
+	.id		= -1,
+	.parent		= &clk_hclkd1,
+};
+
+int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "dout_a2m",
+			.id		= -1,
+			.parent		= &clk_mout_apll.clk,
+		},
+		.sources = &clk_src_apll,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "dout_apll",
+			.id		= -1,
+			.parent		= &clk_mout_arm.clk,
+		},
+		.sources = &clk_src_arm,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "hclkd1",
+			.id		= -1,
+			.parent		= &clk_mout_d1sync.clk,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "hclkd0",
+			.id		= -1,
+			.parent		= &clk_mout_d0sync.clk,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "pclkd0",
+			.id		= -1,
+			.parent		= &clk_hclkd0,
+		},
+		.sources = &clk_src_d0sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "pclkd1",
+			.id		= -1,
+			.parent		= &clk_hclkd1,
+		},
+		.sources = &clk_src_d1sync,
+		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+	}
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_mpll,
+	&clk_mout_epll,
+	&clk_mout_arm,
+	&clk_mout_d0,
+	&clk_mout_d0sync,
+	&clk_mout_d1,
+	&clk_mout_d1sync,
+};
+
+void __init_or_cpufreq s5p6442_setup_clocks(void)
+{
+	struct clk *pclkd0_clk;
+	struct clk *pclkd1_clk;
+
+	unsigned long xtal;
+	unsigned long arm;
+	unsigned long hclkd0 = 0;
+	unsigned long hclkd1 = 0;
+	unsigned long pclkd0 = 0;
+	unsigned long pclkd1 = 0;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal = clk_get_rate(&clk_xtal);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
+			apll, mpll, epll);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s3c_set_clksrc(init_parents[ptr], true);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+
+	arm = clk_get_rate(&clk_dout_apll);
+	hclkd0 = clk_get_rate(&clk_hclkd0);
+	hclkd1 = clk_get_rate(&clk_hclkd1);
+
+	pclkd0_clk = clk_get(NULL, "pclkd0");
+	BUG_ON(IS_ERR(pclkd0_clk));
+
+	pclkd0 = clk_get_rate(pclkd0_clk);
+	clk_put(pclkd0_clk);
+
+	pclkd1_clk = clk_get(NULL, "pclkd1");
+	BUG_ON(IS_ERR(pclkd1_clk));
+
+	pclkd1 = clk_get_rate(pclkd1_clk);
+	clk_put(pclkd1_clk);
+
+	printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
+			hclkd0, hclkd1, pclkd0, pclkd1);
+
+	/* For backward compatibility */
+	clk_f.rate = arm;
+	clk_h.rate = hclkd1;
+	clk_p.rate = pclkd1;
+
+	clk_pclkd0.rate = pclkd0;
+	clk_pclkd1.rate = pclkd1;
+}
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	},
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+	&clk_mout_epll.clk,
+	&clk_mout_d0.clk,
+	&clk_mout_d0sync.clk,
+	&clk_mout_d1.clk,
+	&clk_mout_d1sync.clk,
+	&clk_hclkd0,
+	&clk_pclkd0,
+	&clk_hclkd1,
+	&clk_pclkd1,
+};
+
+void __init s5p6442_register_clocks(void)
+{
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
new file mode 100644
index 0000000..a48fb55
--- /dev/null
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5p6442/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6442.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p6442_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5P6442_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5p6442_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5p6442_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6442_map_io(void)
+{
+	iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
+}
+
+void __init s5p6442_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6442_register_clocks();
+	s5p6442_setup_clocks();
+}
+
+void __init s5p6442_init_irq(void)
+{
+	/* S5P6442 supports 3 VIC */
+	u32 vic[3];
+
+	/* VIC0, VIC1, and VIC2: some interrupt reserved */
+	vic[0] = 0x7fefffff;
+	vic[1] = 0X7f389c81;
+	vic[2] = 0X1bbbcfff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p6442_sysclass = {
+	.name	= "s5p6442-core",
+};
+
+static struct sys_device s5p6442_sysdev = {
+	.cls	= &s5p6442_sysclass,
+};
+
+static int __init s5p6442_core_init(void)
+{
+	return sysdev_class_register(&s5p6442_sysclass);
+}
+
+core_initcall(s5p6442_core_init);
+
+int __init s5p6442_init(void)
+{
+	printk(KERN_INFO "S5P6442: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p6442_idle;
+
+	return sysdev_register(&s5p6442_sysdev);
+}
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
new file mode 100644
index 0000000..cb801e1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -0,0 +1,197 @@
+/* linux/arch/arm/mach-s5p6442/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6442_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+		break;
+
+	case -1:
+		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5p6442_cfg_i2s,
+};
+
+static struct resource s5p6442_iis0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_I2S0,
+		.end   = S5P6442_PA_I2S0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
+	.resource	  = s5p6442_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5p6442_iis1_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_I2S1,
+		.end   = S5P6442_PA_I2S1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
+	.resource	  = s5p6442_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5p6442_pcm_cfg_gpio,
+};
+
+static struct resource s5p6442_pcm0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_PCM0,
+		.end   = S5P6442_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6442_pcm0_resource),
+	.resource	  = s5p6442_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5p6442_pcm1_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_PCM1,
+		.end   = S5P6442_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_pcm1_resource),
+	.resource	  = s5p6442_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
new file mode 100644
index 0000000..3019952
--- /dev/null
+++ b/arch/arm/mach-s5p6442/dev-spi.c
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5P6442_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p6442_spi0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_SPI,
+		.end   = S5P6442_PA_SPI + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
+	.cfg_gpio = s5p6442_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p6442_device_spi = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6442_spi0_resource),
+	.resource	  = s5p6442_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6442_spi0_pdata,
+	},
+};
+
+void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5p6442_spi0_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c
new file mode 100644
index 0000000..ad4f870
--- /dev/null
+++ b/arch/arm/mach-s5p6442/dma.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6442_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6442_PA_PDMA,
+		.end    = S5P6442_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA,
+		.end	= IRQ_PDMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_MAX,
+		[7] = DMACH_MAX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_PCM0_RX,
+		[21] = DMACH_PCM0_TX,
+		[22] = DMACH_PCM1_RX,
+		[23] = DMACH_PCM1_TX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MSM_REQ0,
+		[28] = DMACH_MSM_REQ1,
+		[29] = DMACH_MSM_REQ2,
+		[30] = DMACH_MSM_REQ3,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6442_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
+	.resource	= s5p6442_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6442_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6442_dmacs[] __initdata = {
+	&s5p6442_device_pdma,
+};
+
+static int __init s5p6442_dma_init(void)
+{
+	platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6442_dma_init);
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
new file mode 100644
index 0000000..bb65361
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	.macro addruart, rx, rtmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h
new file mode 100644
index 0000000..81209eb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d574ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
new file mode 100644
index 0000000..b8715df
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/gpio.h
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6442_GPIO_A0_NR	(8)
+#define S5P6442_GPIO_A1_NR	(2)
+#define S5P6442_GPIO_B_NR	(4)
+#define S5P6442_GPIO_C0_NR	(5)
+#define S5P6442_GPIO_C1_NR	(5)
+#define S5P6442_GPIO_D0_NR	(2)
+#define S5P6442_GPIO_D1_NR	(6)
+#define S5P6442_GPIO_E0_NR	(8)
+#define S5P6442_GPIO_E1_NR	(5)
+#define S5P6442_GPIO_F0_NR	(8)
+#define S5P6442_GPIO_F1_NR	(8)
+#define S5P6442_GPIO_F2_NR	(8)
+#define S5P6442_GPIO_F3_NR	(6)
+#define S5P6442_GPIO_G0_NR	(7)
+#define S5P6442_GPIO_G1_NR	(7)
+#define S5P6442_GPIO_G2_NR	(7)
+#define S5P6442_GPIO_H0_NR	(8)
+#define S5P6442_GPIO_H1_NR	(8)
+#define S5P6442_GPIO_H2_NR	(8)
+#define S5P6442_GPIO_H3_NR	(8)
+#define S5P6442_GPIO_J0_NR	(8)
+#define S5P6442_GPIO_J1_NR	(6)
+#define S5P6442_GPIO_J2_NR	(8)
+#define S5P6442_GPIO_J3_NR	(8)
+#define S5P6442_GPIO_J4_NR	(5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P6442_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5P6442_GPIO_A0_START	= 0,
+	S5P6442_GPIO_A1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
+	S5P6442_GPIO_B_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
+	S5P6442_GPIO_C0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
+	S5P6442_GPIO_C1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
+	S5P6442_GPIO_D0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
+	S5P6442_GPIO_D1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
+	S5P6442_GPIO_E0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
+	S5P6442_GPIO_E1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
+	S5P6442_GPIO_F0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
+	S5P6442_GPIO_F1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
+	S5P6442_GPIO_F2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
+	S5P6442_GPIO_F3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
+	S5P6442_GPIO_G0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
+	S5P6442_GPIO_G1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
+	S5P6442_GPIO_G2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
+	S5P6442_GPIO_H0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
+	S5P6442_GPIO_H1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
+	S5P6442_GPIO_H2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
+	S5P6442_GPIO_H3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
+	S5P6442_GPIO_J0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
+	S5P6442_GPIO_J1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
+	S5P6442_GPIO_J2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
+	S5P6442_GPIO_J3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
+	S5P6442_GPIO_J4_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
+};
+
+/* S5P6442 GPIO number definitions. */
+#define S5P6442_GPA0(_nr)	(S5P6442_GPIO_A0_START + (_nr))
+#define S5P6442_GPA1(_nr)	(S5P6442_GPIO_A1_START + (_nr))
+#define S5P6442_GPB(_nr)	(S5P6442_GPIO_B_START + (_nr))
+#define S5P6442_GPC0(_nr)	(S5P6442_GPIO_C0_START + (_nr))
+#define S5P6442_GPC1(_nr)	(S5P6442_GPIO_C1_START + (_nr))
+#define S5P6442_GPD0(_nr)	(S5P6442_GPIO_D0_START + (_nr))
+#define S5P6442_GPD1(_nr)	(S5P6442_GPIO_D1_START + (_nr))
+#define S5P6442_GPE0(_nr)	(S5P6442_GPIO_E0_START + (_nr))
+#define S5P6442_GPE1(_nr)	(S5P6442_GPIO_E1_START + (_nr))
+#define S5P6442_GPF0(_nr)	(S5P6442_GPIO_F0_START + (_nr))
+#define S5P6442_GPF1(_nr)	(S5P6442_GPIO_F1_START + (_nr))
+#define S5P6442_GPF2(_nr)	(S5P6442_GPIO_F2_START + (_nr))
+#define S5P6442_GPF3(_nr)	(S5P6442_GPIO_F3_START + (_nr))
+#define S5P6442_GPG0(_nr)	(S5P6442_GPIO_G0_START + (_nr))
+#define S5P6442_GPG1(_nr)	(S5P6442_GPIO_G1_START + (_nr))
+#define S5P6442_GPG2(_nr)	(S5P6442_GPIO_G2_START + (_nr))
+#define S5P6442_GPH0(_nr)	(S5P6442_GPIO_H0_START + (_nr))
+#define S5P6442_GPH1(_nr)	(S5P6442_GPIO_H1_START + (_nr))
+#define S5P6442_GPH2(_nr)	(S5P6442_GPIO_H2_START + (_nr))
+#define S5P6442_GPH3(_nr)	(S5P6442_GPIO_H3_START + (_nr))
+#define S5P6442_GPJ0(_nr)	(S5P6442_GPIO_J0_START + (_nr))
+#define S5P6442_GPJ1(_nr)	(S5P6442_GPIO_J1_START + (_nr))
+#define S5P6442_GPJ2(_nr)	(S5P6442_GPIO_J2_START + (_nr))
+#define S5P6442_GPJ3(_nr)	(S5P6442_GPIO_J3_START + (_nr))
+#define S5P6442_GPJ4(_nr)	(S5P6442_GPIO_J4_START + (_nr))
+
+/* the end of the S5P6442 specific gpios */
+#define S5P6442_GPIO_END	(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END		S5P6442_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS		(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
new file mode 100644
index 0000000..8cd7b67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
new file mode 100644
index 0000000..5d2195a
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/io.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P6442
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
new file mode 100644
index 0000000..02c2374
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -0,0 +1,87 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+#define IRQ_EINT16_31 		S5P_IRQ_VIC0(16)
+#define IRQ_BATF 		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA 		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA 		S5P_IRQ_VIC0(19)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1 */
+#define IRQ_nPMUIRQ 		S5P_IRQ_VIC1(0)
+#define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
+#define IRQ_UART0 		S5P_IRQ_VIC1(10)
+#define IRQ_UART1 		S5P_IRQ_VIC1(11)
+#define IRQ_UART2 		S5P_IRQ_VIC1(12)
+#define IRQ_SPI0 		S5P_IRQ_VIC1(15)
+#define IRQ_IIC 		S5P_IRQ_VIC1(19)
+#define IRQ_IIC1 		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 		S5P_IRQ_VIC1(21)
+#define IRQ_OTG 		S5P_IRQ_VIC1(24)
+#define IRQ_MSM 		S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 		S5P_IRQ_VIC1(28)
+#define IRQ_COMMRX 		S5P_IRQ_VIC1(29)
+#define IRQ_COMMTX 		S5P_IRQ_VIC1(30)
+
+/* VIC2 */
+#define IRQ_LCD0 		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR 		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG 		S5P_IRQ_VIC2(8)
+#define IRQ_3D 			S5P_IRQ_VIC2(10)
+#define IRQ_Mixer 		S5P_IRQ_VIC2(11)
+#define IRQ_MFC 		S5P_IRQ_VIC2(14)
+#define IRQ_TVENC 		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 		S5P_IRQ_VIC2(17)
+#define IRQ_RP 			S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 		S5P_IRQ_VIC2(21)
+#define IRQ_ADC 		S5P_IRQ_VIC2(23)
+#define IRQ_PENDN 		S5P_IRQ_VIC2(24)
+#define IRQ_KEYPAD 		S5P_IRQ_VIC2(25)
+#define IRQ_SSS_INT 		S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH 		S5P_IRQ_VIC2(28)
+#define IRQ_VIC_END 		S5P_IRQ_VIC2(31)
+
+#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS 		(IRQ_EINT(31) + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
new file mode 100644
index 0000000..32ca424
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6442_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+
+#define S5P6442_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+
+#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5P6442_PA_GPIO
+
+#define S5P6442_PA_VIC0		(0xE4000000)
+#define S5P_PA_VIC0		S5P6442_PA_VIC0
+
+#define S5P6442_PA_VIC1		(0xE4100000)
+#define S5P_PA_VIC1		S5P6442_PA_VIC1
+
+#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P_PA_VIC2		S5P6442_PA_VIC2
+
+#define S5P6442_PA_MDMA		0xE8000000
+#define S5P6442_PA_PDMA		0xE9000000
+
+#define S5P6442_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+
+#define S5P6442_PA_UART		(0xEC000000)
+
+#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6442_PA_IIC0		(0xEC100000)
+
+#define S5P6442_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+
+#define S5P6442_PA_SPI		0xEC300000
+
+/* I2S */
+#define S5P6442_PA_I2S0		0xC0B00000
+#define S5P6442_PA_I2S1		0xF2200000
+
+/* PCM */
+#define S5P6442_PA_PCM0		0xF2400000
+#define S5P6442_PA_PCM1		0xF2500000
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5P6442_PA_UART
+#define S3C_PA_IIC		S5P6442_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
new file mode 100644
index 0000000..9ddd877
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
new file mode 100644
index 0000000..2724b37
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5P6442 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
new file mode 100644
index 0000000..d8360b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+
+/* CLK_OUT */
+#define S5P_CLK_OUT_SHIFT	(12)
+#define S5P_CLK_OUT_MASK	(0x1F << S5P_CLK_OUT_SHIFT)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+#define S5P_CLK_DIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLK_DIV_STAT1	S5P_CLKREG(0x1004)
+
+#define S5P_CLK_MUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLK_MUX_STAT1	S5P_CLKREG(0x1104)
+
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
+
+/* Register Bit definition */
+#define S5P_EPLL_EN     		(1<<31)
+#define S5P_EPLL_MASK   		0xffffffff
+#define S5P_EPLLVAL(_m, _p, _s)   	((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_D0CLK_SHIFT		(16)
+#define S5P_CLKDIV0_D0CLK_MASK		(0xF << S5P_CLKDIV0_D0CLK_SHIFT)
+#define S5P_CLKDIV0_P0CLK_SHIFT		(20)
+#define S5P_CLKDIV0_P0CLK_MASK		(0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
+#define S5P_CLKDIV0_D1CLK_SHIFT		(24)
+#define S5P_CLKDIV0_D1CLK_MASK		(0xF << S5P_CLKDIV0_D1CLK_SHIFT)
+#define S5P_CLKDIV0_P1CLK_SHIFT		(28)
+#define S5P_CLKDIV0_P1CLK_MASK		(0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
+
+/* Clock MUX status Registers */
+#define S5P_CLK_MUX_STAT0_APLL_SHIFT	(0)
+#define S5P_CLK_MUX_STAT0_APLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MPLL_SHIFT	(4)
+#define S5P_CLK_MUX_STAT0_MPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_EPLL_SHIFT	(8)
+#define S5P_CLK_MUX_STAT0_EPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_VPLL_SHIFT	(12)
+#define S5P_CLK_MUX_STAT0_VPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT	(16)
+#define S5P_CLK_MUX_STAT0_MUXARM_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT	(20)
+#define S5P_CLK_MUX_STAT0_MUXD0_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT	(24)
+#define S5P_CLK_MUX_STAT0_MUXD1_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
+#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT	(24)
+#define S5P_CLK_MUX_STAT1_D1SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
+#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT	(28)
+#define S5P_CLK_MUX_STAT1_D0SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
new file mode 100644
index 0000000..73782b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
new file mode 100644
index 0000000..7fd8820
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5P6442_PLAT_SPI_CLKS_H
+#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
+
+#define S5P6442_SPI_SRCCLK_PCLK		0
+#define S5P6442_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5P6442_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
new file mode 100644
index 0000000..8bcd8ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
new file mode 100644
index 0000000..e1d4cab
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5P6442 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
new file mode 100644
index 0000000..ff8f2fc
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P6442 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
new file mode 100644
index 0000000..5ac7cbe
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P6442 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
new file mode 100644
index 0000000..be33336
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5P6442 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
new file mode 100644
index 0000000..1874bdb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6442.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p6442_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
new file mode 100644
index 0000000..ebcf997
--- /dev/null
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5p6442.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5P6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6442_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5P6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5P6442_UCON_DEFAULT,
+		.ulcon		= S5P6442_ULCON_DEFAULT,
+		.ufcon		= S5P6442_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6442_devices[] __initdata = {
+	&s5p6442_device_iis0,
+};
+
+static void __init smdk6442_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
+}
+
+static void __init smdk6442_machine_init(void)
+{
+	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
+}
+
+MACHINE_START(SMDK6442, "SMDK6442")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5p6442_init_irq,
+	.map_io		= smdk6442_map_io,
+	.init_machine	= smdk6442_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
new file mode 100644
index 0000000..662695d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 27ec167..b2a11df 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -5,18 +5,36 @@
 
 # Configuration options for the S5PC100 CPU
 
+if ARCH_S5PC100
+
 config CPU_S5PC100
 	bool
-	select CPU_S5PC100_INIT
-	select CPU_S5PC100_CLOCK
+	select PLAT_S5P
+	select S5P_EXT_INT
+	select S3C_PL330_DMA
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
 config S5PC100_SETUP_SDHCI
-        bool
-        select S5PC1XX_SETUP_SDHCI_GPIO
-        help
-          Internal helper functions for S5PC100 based SDHCI systems
+	bool
+	select S5PC100_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S5PC100 based SDHCI systems
+
+config S5PC100_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
 
 config MACH_SMDKC100
 	bool "SMDKC100"
@@ -26,9 +44,10 @@ config MACH_SMDKC100
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC1XX_SETUP_I2C0
-	select S5PC1XX_SETUP_I2C1
-	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_FB_24BPP
+	select S5PC100_SETUP_I2C1
 	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
+
+endif
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 809ff10..543f3de 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,11 +11,24 @@ obj-				:=
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
+obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
 # Helper and device support
 
-obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 # machine support
+
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
+
+# device support
+obj-y				+= dev-audio.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
new file mode 100644
index 0000000..e3fed4c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -0,0 +1,1358 @@
+/* linux/arch/arm/mach-s5pc100/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PC100 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pc100.h>
+
+static struct clk s5p_clk_otgphy = {
+	.name		= "otg_phy",
+	.id		= -1,
+};
+
+static struct clk *clk_src_mout_href_list[] = {
+	[0] = &s5p_clk_27m,
+	[1] = &clk_fin_hpll,
+};
+
+static struct clksrc_sources clk_src_mout_href = {
+	.sources	= clk_src_mout_href_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_href_list),
+};
+
+static struct clksrc_clk clk_mout_href = {
+	.clk = {
+		.name           = "mout_href",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_href,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+};
+
+static struct clk *clk_src_mout_48m_list[] = {
+	[0] = &clk_xusbxti,
+	[1] = &s5p_clk_otgphy,
+};
+
+static struct clksrc_sources clk_src_mout_48m = {
+	.sources	= clk_src_mout_48m_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_48m_list),
+};
+
+static struct clksrc_clk clk_mout_48m = {
+	.clk = {
+		.name           = "mout_48m",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_48m,
+	.reg_src        = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name           = "mout_mpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk    = {
+		.name           = "mout_apll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_apll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk    = {
+		.name           = "mout_epll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_epll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clk *clk_src_mout_hpll_list[] = {
+	[0] = &s5p_clk_27m,
+};
+
+static struct clksrc_sources clk_src_mout_hpll = {
+	.sources	= clk_src_mout_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+	.clk    = {
+		.name           = "mout_hpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_hpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_apll = {
+	.clk	= {
+		.name	= "div_apll",
+		.id	= -1,
+		.parent	= &clk_mout_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_arm = {
+	.clk	= {
+		.name	= "div_arm",
+		.id	= -1,
+		.parent	= &clk_div_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_d0_bus = {
+	.clk	= {
+		.name	= "div_d0_bus",
+		.id	= -1,
+		.parent	= &clk_div_arm.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_pclkd0 = {
+	.clk	= {
+		.name	= "div_pclkd0",
+		.id	= -1,
+		.parent	= &clk_div_d0_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_secss = {
+	.clk	= {
+		.name	= "div_secss",
+		.id	= -1,
+		.parent	= &clk_div_d0_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_apll2 = {
+	.clk	= {
+		.name	= "div_apll2",
+		.id	= -1,
+		.parent	= &clk_mout_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
+};
+
+static struct clk *clk_src_mout_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_div_apll2.clk,
+};
+
+struct clksrc_sources clk_src_mout_am = {
+	.sources	= clk_src_mout_am_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+	.clk	= {
+		.name	= "mout_am",
+		.id	= -1,
+	},
+	.sources = &clk_src_mout_am,
+	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_d1_bus = {
+	.clk	= {
+		.name	= "div_d1_bus",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_mpll2 = {
+	.clk	= {
+		.name	= "div_mpll2",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_mpll = {
+	.clk	= {
+		.name	= "div_mpll",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
+};
+
+static struct clk *clk_src_mout_onenand_list[] = {
+	[0] = &clk_div_d0_bus.clk,
+	[1] = &clk_div_d1_bus.clk,
+};
+
+struct clksrc_sources clk_src_mout_onenand = {
+	.sources	= clk_src_mout_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk	= {
+		.name	= "mout_onenand",
+		.id	= -1,
+	},
+	.sources = &clk_src_mout_onenand,
+	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_onenand = {
+	.clk	= {
+		.name	= "div_onenand",
+		.id	= -1,
+		.parent	= &clk_mout_onenand.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
+};
+
+static struct clksrc_clk clk_div_pclkd1 = {
+	.clk	= {
+		.name	= "div_pclkd1",
+		.id	= -1,
+		.parent	= &clk_div_d1_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_cam = {
+	.clk	= {
+		.name	= "div_cam",
+		.id	= -1,
+		.parent	= &clk_div_mpll2.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
+};
+
+static struct clksrc_clk clk_div_hdmi = {
+	.clk	= {
+		.name	= "div_hdmi",
+		.id	= -1,
+		.parent	= &clk_mout_hpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
+};
+
+static int s5pc100_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+static unsigned long s5pc100_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static u32 epll_div[][4] = {
+	{ 32750000,	131, 3, 4 },
+	{ 32768000,	131, 3, 4 },
+	{ 36000000,	72,  3, 3 },
+	{ 45000000,	90,  3, 3 },
+	{ 45158000,	90,  3, 3 },
+	{ 45158400,	90,  3, 3 },
+	{ 48000000,	96,  3, 3 },
+	{ 49125000,	131, 4, 3 },
+	{ 49152000,	131, 4, 3 },
+	{ 60000000,	120, 3, 3 },
+	{ 67737600,	226, 5, 3 },
+	{ 67738000,	226, 5, 3 },
+	{ 73800000,	246, 5, 3 },
+	{ 73728000,	246, 5, 3 },
+	{ 72000000,	144, 3, 3 },
+	{ 84000000,	168, 3, 3 },
+	{ 96000000,	96,  3, 2 },
+	{ 144000000,	144, 3, 2 },
+	{ 192000000,	96,  3, 1 }
+};
+
+static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+
+	epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		if (epll_div[i][0] == rate) {
+			epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
+				    (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
+				    (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5pc100_epll_ops = {
+	.get_rate = s5pc100_epll_get_rate,
+	.set_rate = s5pc100_epll_set_rate,
+};
+
+static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
+}
+
+static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "cfcon",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "nfcon",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "onenandc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_2_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_2_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "modemif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "usbhost",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "mipi-dsim",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "mipi-csis",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "g3d",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "spi_48m",
+		.id		= 2,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	},
+};
+
+static struct clk clk_vclk54m = {
+	.name		= "vclk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static struct clk clk_i2scdclk0 = {
+	.name		= "i2s_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_i2scdclk1 = {
+	.name		= "i2s_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_i2scdclk2 = {
+	.name		= "i2s_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clk_src_group1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll2.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group1 = {
+	.sources	= clk_src_group1_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group1_list),
+};
+
+static struct clk *clk_src_group2_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_group2 = {
+	.sources	= clk_src_group2_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group2_list),
+};
+
+static struct clk *clk_src_group3_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk0,
+	[4] = &clk_pcmcdclk0,
+	[5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group3 = {
+	.sources	= clk_src_group3_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
+};
+
+static struct clk *clk_src_group4_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk1,
+	[4] = &clk_pcmcdclk1,
+	[5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group4 = {
+	.sources	= clk_src_group4_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
+};
+
+static struct clk *clk_src_group5_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk2,
+	[4] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group5 = {
+	.sources	= clk_src_group5_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
+};
+
+static struct clk *clk_src_group6_list[] = {
+	[0] = &s5p_clk_27m,
+	[1] = &clk_vclk54m,
+	[2] = &clk_div_hdmi.clk,
+};
+
+struct clksrc_sources clk_src_group6 = {
+	.sources	= clk_src_group6_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group6_list),
+};
+
+static struct clk *clk_src_group7_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_mout_hpll.clk,
+	[3] = &clk_vclk54m,
+};
+
+struct clksrc_sources clk_src_group7 = {
+	.sources	= clk_src_group7_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group7_list),
+};
+
+static struct clk *clk_src_mmc0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+};
+
+struct clksrc_sources clk_src_mmc0 = {
+	.sources	= clk_src_mmc0_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mmc0_list),
+};
+
+static struct clk *clk_src_mmc12_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_mmc12 = {
+	.sources	= clk_src_mmc12_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mmc12_list),
+};
+
+static struct clk *clk_src_irda_usb_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_irda_usb = {
+	.sources	= clk_src_irda_usb_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_irda_usb_list),
+};
+
+static struct clk *clk_src_pwi_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_mout_epll.clk,
+	[2] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_pwi = {
+	.sources	= clk_src_pwi_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 4),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 2,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 3),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mixer",
+			.id		= -1,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group6,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 0,
+			.ctrlbit	= (1 << 8),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group3,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 1,
+			.ctrlbit	= (1 << 9),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group4,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 2,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group5,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_lcd",
+			.id		= -1,
+			.ctrlbit	= (1 << 0),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 0,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 2,
+			.ctrlbit	= (1 << 3),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= (1 << 12),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc0,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= (1 << 13),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= (1 << 14),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_irda",
+			.id		= 2,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_irda_usb,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_irda",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_pwi",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_pwi,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "sclk_uhost",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_irda_usb,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
+	},
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_mout_hpll,
+	&clk_mout_href,
+	&clk_mout_48m,
+	&clk_div_apll,
+	&clk_div_arm,
+	&clk_div_d0_bus,
+	&clk_div_pclkd0,
+	&clk_div_secss,
+	&clk_div_apll2,
+	&clk_mout_am,
+	&clk_div_d1_bus,
+	&clk_div_mpll2,
+	&clk_div_mpll,
+	&clk_mout_onenand,
+	&clk_div_onenand,
+	&clk_div_pclkd1,
+	&clk_div_cam,
+	&clk_div_hdmi,
+};
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	unsigned long xtal;
+	unsigned long arm;
+	unsigned long hclkd0;
+	unsigned long hclkd1;
+	unsigned long pclkd0;
+	unsigned long pclkd1;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long hpll;
+	unsigned int ptr;
+
+	/* Set S5PC100 functions for clk_fout_epll */
+	clk_fout_epll.enable = s5pc100_epll_enable;
+	clk_fout_epll.ops = &s5pc100_epll_ops;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal = clk_get_rate(&clk_xtal);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
+	mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
+	epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
+	hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_mout_hpll.clk.rate = hpll;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+
+	arm = clk_get_rate(&clk_div_arm.clk);
+	hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
+	pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
+	hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
+	pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
+
+	printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
+			print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
+
+	clk_f.rate = arm;
+	clk_h.rate = hclkd1;
+	clk_p.rate = pclkd1;
+}
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 6),
+	},
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_i2scdclk0,
+	&clk_i2scdclk1,
+	&clk_i2scdclk2,
+	&clk_pcmcdclk0,
+	&clk_pcmcdclk1,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index d79e757..7b5bdbc 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,47 +22,55 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
-#include <asm/proc-fns.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/proc-fns.h>
+
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <asm/irq.h>
 
-#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-power.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/sdhci.h>
 #include <plat/iic-core.h>
+#include <plat/sdhci.h>
+#include <plat/onenand-core.h>
+
 #include <plat/s5pc100.h>
 
 /* Initial IO mappings */
 
 static struct map_desc s5pc100_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
+		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
 };
 
 static void s5pc100_idle(void)
 {
-	unsigned long tmp;
-
-	tmp = __raw_readl(S5PC100_PWR_CFG);
-	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
-	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
-	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
-	__raw_writel(tmp, S5PC100_PWR_CFG);
-
-	tmp = __raw_readl(S5PC100_OTHERS);
-	tmp |= S5PC100_PMU_INT_DISABLE;
-	__raw_writel(tmp, S5PC100_OTHERS);
+	if (!need_resched())
+		cpu_do_idle();
 
-	cpu_do_idle();
+	local_irq_enable();
 }
 
 /* s5pc100_map_io
@@ -82,26 +90,29 @@ void __init s5pc100_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_onenand_setname("s5pc100-onenand");
 }
 
 void __init s5pc100_init_clocks(int xtal)
 {
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
 	s3c24xx_register_baseclocks(xtal);
-	s5pc1xx_register_clocks();
+	s5p_register_clocks(xtal);
 	s5pc100_register_clocks();
 	s5pc100_setup_clocks();
 }
 
 void __init s5pc100_init_irq(void)
 {
-	u32 vic_valid[] = {~0, ~0, ~0};
+	u32 vic[] = {~0, ~0, ~0};
 
 	/* VIC0, VIC1, and VIC2 are fully populated. */
-	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-struct sysdev_class s5pc100_sysclass = {
+static struct sysdev_class s5pc100_sysclass = {
 	.name	= "s5pc100-core",
 };
 
@@ -118,9 +129,10 @@ core_initcall(s5pc100_core_init);
 
 int __init s5pc100_init(void)
 {
-	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+	printk(KERN_INFO "S5PC100: Initializing architecture\n");
 
-	s5pc1xx_idle = s5pc100_idle;
+	/* set idle function */
+	pm_idle = s5pc100_idle;
 
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
new file mode 100644
index 0000000..18cfe9a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pc100/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pc100_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+		break;
+
+	case -1: /* Dedicated pins */
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+};
+
+static struct resource s5pc100_iis0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S0,
+		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
+	.resource	  = s5pc100_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S1,
+		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
+	.resource	  = s5pc100_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis2_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S2,
+		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis2 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
+	.resource	  = s5pc100_iis2_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pc100_pcm_cfg_gpio,
+};
+
+static struct resource s5pc100_pcm0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM0,
+		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm0_resource),
+	.resource	  = s5pc100_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pc100_pcm1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM1,
+		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm1_resource),
+	.resource	  = s5pc100_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pc100_ac97_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_AC97,
+		.end   = S5PC100_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pc100_ac97_cfg_gpio,
+};
+
+static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
+	.resource	  = s5pc100_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pc100_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
new file mode 100644
index 0000000..14618c3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -0,0 +1,233 @@
+/* linux/arch/arm/mach-s5pc100/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S5PC100_SPI_SRCCLK_PCLK] = "pclk",
+	[S5PC100_SPI_SRCCLK_48M] = "spi_48m",
+	[S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5pc100_spi0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI0,
+		.end   = S5PC100_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi0_resource),
+	.resource	  = s5pc100_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi0_pdata,
+	},
+};
+
+static struct resource s5pc100_spi1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI1,
+		.end   = S5PC100_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+struct platform_device s5pc100_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi1_resource),
+	.resource	  = s5pc100_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi1_pdata,
+	},
+};
+
+static struct resource s5pc100_spi2_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI2,
+		.end   = S5PC100_PA_SPI2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI2_TX,
+		.end   = DMACH_SPI2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI2_RX,
+		.end   = DMACH_SPI2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI2,
+		.end   = IRQ_SPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+struct platform_device s5pc100_device_spi2 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi2_resource),
+	.resource	  = s5pc100_spi2_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi2_pdata,
+	},
+};
+
+void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5pc100_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5pc100_spi1_pdata;
+		break;
+	case 2:
+		pd = &s5pc100_spi2_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
new file mode 100644
index 0000000..0f55175
--- /dev/null
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pc100_pdma0_resource[] = {
+	[0] = {
+		.start  = S5PC100_PA_PDMA0,
+		.end    = S5PC100_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_IRDA,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_SPI2_RX,
+		[21] = DMACH_SPI2_TX,
+		[22] = DMACH_AC97_MICIN,
+		[23] = DMACH_AC97_PCMIN,
+		[24] = DMACH_AC97_PCMOUT,
+		[25] = DMACH_EXTERNAL,
+		[26] = DMACH_PWM,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_HSI_RX,
+		[29] = DMACH_HSI_TX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pc100_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
+	.resource	= s5pc100_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_pdma0_pdata,
+	},
+};
+
+static struct resource s5pc100_pdma1_resource[] = {
+	[0] = {
+		.start  = S5PC100_PA_PDMA1,
+		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_IRDA,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_SPI2_RX,
+		[21] = DMACH_SPI2_TX,
+		[22] = DMACH_PCM0_RX,
+		[23] = DMACH_PCM0_TX,
+		[24] = DMACH_PCM1_RX,
+		[25] = DMACH_PCM1_TX,
+		[26] = DMACH_MSM_REQ0,
+		[27] = DMACH_MSM_REQ1,
+		[28] = DMACH_MSM_REQ2,
+		[29] = DMACH_MSM_REQ3,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pc100_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
+	.resource	= s5pc100_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pc100_dmacs[] __initdata = {
+	&s5pc100_device_pdma0,
+	&s5pc100_device_pdma1,
+};
+
+static int __init s5pc100_dma_init(void)
+{
+	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pc100_dma_init);
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
new file mode 100644
index 0000000..0fab7f2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/gpiolib.c
@@ -0,0 +1,426 @@
+/*
+ * arch/arm/plat-s5pc100/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC100 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc100_gpioint;
+extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc100_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint) {
+		chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+	}
+}
+
+static __init int s5pc100_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip;
+	int nr_chips;
+
+	chip = s5pc100_gpio_chips;
+	nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	for (; nr_chips > 0; nr_chips--, chip++)
+		s5pc100_gpiolib_link(chip);
+
+	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
+				       ARRAY_SIZE(s5pc100_gpio_chips));
+
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc100_gpiolib_init);
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 9d142cc..70e02e9 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,12 +22,14 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx
+	.macro addruart, rx, rtmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
 	.endm
 
 /* include the reset of the code which will do the work, we're only
diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h
new file mode 100644
index 0000000..81209eb
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index 6713193..ba76af0 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
+	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
@@ -29,18 +29,18 @@
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 
 	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
 	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
 	teq	\irqstat, #0
 
 	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
 
 	@ otherwise try vic2
-	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
deleted file mode 100644
index ad28d8e..0000000
--- a/arch/arm/mach-s5pc100/include/mach/gpio-core.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO core support
- *
- * Based on mach-s3c6400/include/mach/gpio-core.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-/* currently we just include the platform support */
-#include <plat/gpio-core.h>
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 2c4cbe8..71ae1f5 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -12,6 +12,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
 #define gpio_get_value	__gpio_get_value
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
@@ -52,11 +55,6 @@
 #define S5PC100_GPIO_L2_NR	(8)
 #define S5PC100_GPIO_L3_NR	(8)
 #define S5PC100_GPIO_L4_NR	(8)
-#define S5PC100_GPIO_MP00_NR	(8)
-#define S5PC100_GPIO_MP01_NR	(8)
-#define S5PC100_GPIO_MP02_NR	(8)
-#define S5PC100_GPIO_MP03_NR	(8)
-#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -65,50 +63,45 @@
  * change from one gpio bank to another can be caught.
 */
 
-#define S5PC1XX_GPIO_NEXT(__gpio) \
+#define S5PC100_GPIO_NEXT(__gpio) \
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
-enum s3c_gpio_number {
+enum s5p_gpio_number {
 	S5PC100_GPIO_A0_START	= 0,
-	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
-	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
-	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
-	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
-	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
-	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
-	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
-	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
-	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
-	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
-	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
-	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
-	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
-	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
-	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
-	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
-	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
-	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
-	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
-	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
-	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
-	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
-	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
-	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
-	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
-	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
-	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
-	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
-	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
-	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
-	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
-	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
-	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
-	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
-	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
-	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
-	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
-	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
-	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
+	S5PC100_GPIO_A1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_END	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
 };
 
 /* S5PC100 GPIO number definitions. */
@@ -146,17 +139,20 @@ enum s3c_gpio_number {
 #define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
 #define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
 #define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
-#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
-#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
-#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
-#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
-#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
-#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* It used the end of the S5PC1XX gpios */
+/* It used the end of the S5PC100 gpios */
 #define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
+#define EINT_MODE		S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
+#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
+#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
+#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
+
 #include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
new file mode 100644
index 0000000..819acf5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5PC100 systems
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index b53fa48..28aa551 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,9 +11,104 @@
 
 #include <plat/irqs.h>
 
-/* LCD */
+/* VIC0: system, DMA, timer */
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1: ARM, power, memory, connectivity */
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+
+/* VIC2: multimedia, audio, security */
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+#define IRQ_VIC_END		S5P_IRQ_VIC2(31)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
+
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
+#define NR_IRQS		(S3C_IRQ_GPIO(320) + 1)
+
+/* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
 
-#endif /* __ASM_ARCH_IRQ_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 4681ebe..cadae43 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -3,9 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Based on mach-s3c6400/include/mach/map.h
- *
- * S5PC1XX - Memory map definitions
+ * S5PC100 - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,6 +14,7 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s5p.h>
 
 /*
  * map-base.h has already defined virtual memory address
@@ -31,25 +30,21 @@
  *
  */
 
+#define S5PC100_PA_ONENAND_BUF	(0xB0000000)
+#define S5PC100_SZ_ONENAND_BUF	(SZ_256M - SZ_32M)
+
 /* Chip ID */
+
 #define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
-#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
-
-/* System */
-#define S5PC100_PA_CLK		(0xE0100000)
-#define S5PC100_PA_CLK_OTHER	(0xE0200000)
-#define S5PC100_PA_PWR		(0xE0108000)
-#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
-#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
-#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
-#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
-#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
-#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
-
-/* GPIO */
-#define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
+
+#define S5PC100_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
+
+#define S5PC100_PA_OTHERS	(0xE0200000)
+#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+
+#define S5P_PA_GPIO		(0xE0300000)
 #define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
@@ -59,6 +54,12 @@
 #define S5PC100_VA_VIC_OFFSET	0x10000
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5P_PA_VIC0		S5PC1XX_PA_VIC(0)
+#define S5P_PA_VIC1		S5PC1XX_PA_VIC(1)
+#define S5P_PA_VIC2		S5PC1XX_PA_VIC(2)
+
+
+#define S5PC100_PA_ONENAND	(0xE7100000)
 
 /* DMA */
 #define S5PC100_PA_MDMA		(0xE8100000)
@@ -67,84 +68,71 @@
 
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
-#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
-#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+#define S5P_PA_TIMER		S5PC100_PA_TIMER
 
-/* RTC */
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_SYSTIMER	(0xEA100000)
 
-/* UART */
 #define S5PC100_PA_UART		(0xEC000000)
-#define S5PC1XX_PA_UART		S5PC100_PA_UART
-#define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* I2C */
-#define S5PC100_PA_I2C		(0xEC100000)
-#define S5PC100_PA_I2C1		(0xEC200000)
+#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S5P_SZ_UART		SZ_256
+
+#define S5PC100_PA_IIC0		(0xEC100000)
+#define S5PC100_PA_IIC1		(0xEC200000)
+
+/* SPI */
+#define S5PC100_PA_SPI0		0xEC300000
+#define S5PC100_PA_SPI1		0xEC400000
+#define S5PC100_PA_SPI2		0xEC500000
 
 /* USB HS OTG */
 #define S5PC100_PA_USB_HSOTG	(0xED200000)
 #define S5PC100_PA_USB_HSPHY	(0xED300000)
 
-/* SD/MMC */
-#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
-#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
-#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
-#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
-
-/* LCD */
 #define S5PC100_PA_FB		(0xEE000000)
 
-/* Multimedia */
-#define S5PC100_PA_G2D		(0xEE800000)
-#define S5PC100_PA_JPEG		(0xEE500000)
-#define S5PC100_PA_ROTATOR	(0xEE100000)
-#define S5PC100_PA_G3D		(0xEF000000)
-
-/* I2S */
 #define S5PC100_PA_I2S0		(0xF2000000)
 #define S5PC100_PA_I2S1		(0xF2100000)
 #define S5PC100_PA_I2S2		(0xF2200000)
 
+#define S5PC100_PA_AC97		0xF2300000
+
+/* PCM */
+#define S5PC100_PA_PCM0		0xF2400000
+#define S5PC100_PA_PCM1		0xF2500000
+
 /* KEYPAD */
 #define S5PC100_PA_KEYPAD	(0xF3100000)
 
-/* ADC & TouchScreen */
-#define S5PC100_PA_TSADC	(0xF3000000)
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
-/* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
-#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
+#define S5P_PA_SDRAM		S5PC100_PA_SDRAM
 
-/* compatibility defines. */
-#define S3C_PA_RTC		S5PC100_PA_RTC
+/* compatibiltiy defines. */
 #define S3C_PA_UART		S5PC100_PA_UART
-#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
-#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
-#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
-#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
-#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
-#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
-#define S3C_UART_OFFSET		0x400
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_IIC		S5PC100_PA_IIC0
+#define S3C_PA_IIC1		S5PC100_PA_IIC1
 #define S3C_PA_FB		S5PC100_PA_FB
 #define S3C_PA_G2D		S5PC100_PA_G2D
 #define S3C_PA_G3D		S5PC100_PA_G3D
 #define S3C_PA_JPEG		S5PC100_PA_JPEG
 #define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
-#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_I2C
-#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S5P_VA_VIC0		S5PC1XX_VA_VIC(0)
+#define S5P_VA_VIC1		S5PC1XX_VA_VIC(1)
+#define S5P_VA_VIC2		S5PC1XX_VA_VIC(2)
 #define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
 #define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
-#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
-#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
 #define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
 #define S3C_PA_TSADC		S5PC100_PA_TSADC
+#define S3C_PA_ONENAND		S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
+#define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
new file mode 100644
index 0000000..5d27d28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -0,0 +1,77 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PC100 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5PC100_REG_OTHERS(x)	(S5PC100_VA_OTHERS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_HPLL_LOCK		S5P_CLKREG(0x0C)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x104)
+#define S5P_EPLL_CON		S5P_CLKREG(0x108)
+#define S5P_HPLL_CON		S5P_CLKREG(0x10C)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+
+#define S5P_CLK_OUT		S5P_CLKREG(0x400)
+
+#define S5P_CLKGATE_D00		S5P_CLKREG(0x500)
+#define S5P_CLKGATE_D01		S5P_CLKREG(0x504)
+#define S5P_CLKGATE_D02		S5P_CLKREG(0x508)
+
+#define S5P_CLKGATE_D10		S5P_CLKREG(0x520)
+#define S5P_CLKGATE_D11		S5P_CLKREG(0x524)
+#define S5P_CLKGATE_D12		S5P_CLKREG(0x528)
+#define S5P_CLKGATE_D13		S5P_CLKREG(0x52C)
+#define S5P_CLKGATE_D14		S5P_CLKREG(0x530)
+#define S5P_CLKGATE_D15		S5P_CLKREG(0x534)
+
+#define S5P_CLKGATE_D20		S5P_CLKREG(0x540)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x560)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x564)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5P_CLKDIV0_D0_SHIFT		(8)
+#define S5P_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5P_CLKDIV0_PCLKD0_SHIFT	(12)
+
+/* CLKDIV1 */
+#define S5P_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5P_CLKDIV1_D1_SHIFT		(12)
+#define S5P_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
+
+#define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
+
+#define S5PC100_SWRESET_RESETVAL	0xc100
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
new file mode 100644
index 0000000..dd6295e
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO register definitions
+ */
+
+#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
+#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5P_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+
+#define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
+
+#define S5PC100EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PC100EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PC100EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PC100EINT30MASK + ((x) * 0x4))
+
+#define S5PC100EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PC100EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 751ac15..4d9036d 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - IRQ register definitions
+ * S5PC100 - IRQ register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,9 +16,4 @@
 #include <mach/map.h>
 #include <asm/hardware/vic.h>
 
-/* interrupt controller */
-#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
-#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
-#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
-
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
new file mode 100644
index 0000000..65e4263
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5PC100_PLAT_SPI_CLKS_H
+#define __S5PC100_PLAT_SPI_CLKS_H __FILE__
+
+#define S5PC100_SPI_SRCCLK_PCLK		0
+#define S5PC100_SPI_SRCCLK_48M		1
+#define S5PC100_SPI_SRCCLK_SPIBUS	2
+
+#endif /* __S5PC100_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index f0d31a2..681f626 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - system implementation
+ * S5PC100 - system implementation
  *
  * Based on mach-s3c6400/include/mach/system.h
  */
@@ -13,14 +13,11 @@
 
 #include <linux/io.h>
 #include <mach/map.h>
-#include <plat/regs-clock.h>
-
-void (*s5pc1xx_idle)(void);
+#include <mach/regs-clock.h>
 
 static void arch_idle(void)
 {
-	if (s5pc1xx_idle)
-		s5pc1xx_idle();
+	/* nothing here yet */
 }
 
 static void arch_reset(char mode, const char *cmd)
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index d3de0f3..20f6873 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -20,8 +20,8 @@
  */
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
 }
 
 #define TICK_MAX	(0xffffffff)
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
new file mode 100644
index 0000000..47ffb17
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 0000000..be9df79
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xe0000000UL)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c
new file mode 100644
index 0000000..19d7b52
--- /dev/null
+++ b/arch/arm/mach-s5pc100/init.c
@@ -0,0 +1,24 @@
+/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pc100/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c
new file mode 100644
index 0000000..2bf86c1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/mach-s5pc100/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5P_GPIOREG(x)		(S5P_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc100_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc100_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc100_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc100_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc100_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc100_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc100_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc100_gpioint_mask(irq);
+	s5pc100_gpioint_ack(irq);
+}
+
+static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc100_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc100_gpioint_ack,
+	.mask		= s5pc100_gpioint_mask,
+	.mask_ack	= s5pc100_gpioint_mask_ack,
+	.unmask		= s5pc100_gpioint_unmask,
+	.set_type	= s5pc100_gpioint_set_type,
+};
+
+void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc100_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index ae3c52c..af22f82 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -35,7 +35,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
@@ -44,38 +43,48 @@
 #include <plat/fb.h>
 #include <plat/iic.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PC100_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S3C2440_UFCON_RXTRIG8 |	\
+				 S3C2440_UFCON_TXTRIG16)
 
 static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 };
 
@@ -119,8 +128,7 @@ static struct platform_device smdkc100_lcd_powerdev = {
 static struct s3c_fb_pd_win smdkc100_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.refresh	= 70,
-		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -141,8 +149,6 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
 	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
 };
 
-static struct map_desc smdkc100_iodesc[] = {};
-
 static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
@@ -151,11 +157,13 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&smdkc100_lcd_powerdev,
+	&s5pc100_device_iis0,
+	&s5pc100_device_ac97,
 };
 
 static void __init smdkc100_map_io(void)
 {
-	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
 }
@@ -179,10 +187,9 @@ static void __init smdkc100_machine_init(void)
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC100_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5PC100_PA_SDRAM + 0x100,
-
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
new file mode 100644
index 0000000..6eba6cb
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC100 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
new file mode 100644
index 0000000..dd3174e
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
new file mode 100644
index 0000000..d1fec26
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
new file mode 100644
index 0000000..7769c76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index 4385986..ea7ff19 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -28,8 +28,8 @@
 char *s5pc100_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
-	/* [2] = "mmc_bus", not yet succesfuuly used yet */
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [2] = "mmc_bus", not yet successfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 0000000..0761eac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,91 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+	bool
+	select PLAT_S5P
+	select S3C_PL330_DMA
+	select S5P_EXT_INT
+	help
+	  Enable S5PV210 CPU support
+
+config S5PV210_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5PV210_SETUP_I2C2
+	bool
+	help
+	  Common setup code for i2c bus 2.
+
+config S5PV210_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PV210 with an 24bpp RGB display helper.
+
+config S5PV210_SETUP_SDHCI
+        bool
+        select S5PV210_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PV210 based SDHCI systems
+
+config S5PV210_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_AQUILA
+	bool "Samsung Aquila"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S5PV210_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	help
+	  Machine support for the Samsung Aquila target based on S5PC110 SoC
+
+config MACH_GONI
+	bool "GONI"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung GONI board
+	  S5PC110(MCP) is one of package option of S5PV210
+
+config S5PC110_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
+config MACH_SMDKV210
+	bool "SMDKV210"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
+	help
+	  Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
+	help
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 0000000..30be9a6
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,35 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
+
+# machine support
+
+obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
+obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
+obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
+
+# device support
+
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
+
+obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
new file mode 100644
index 0000000..af91fef
--- /dev/null
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -0,0 +1,1052 @@
+/* linux/arch/arm/mach-s5pv210/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pv210.h>
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_armclk_list[] = {
+	[0] = &clk_mout_apll.clk,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_armclk = {
+	.sources	= clkset_armclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_armclk_list),
+};
+
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+	},
+	.sources	= &clkset_armclk,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_msys = {
+	.clk	= {
+		.name		= "hclk_msys",
+		.id		= -1,
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_msys = {
+	.clk	= {
+		.name		= "pclk_msys",
+		.id		= -1,
+		.parent		= &clk_hclk_msys.clk,
+	},
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_sclk_a2m = {
+	.clk	= {
+		.name		= "sclk_a2m",
+		.id		= -1,
+		.parent		= &clk_mout_apll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clk *clkset_hclk_sys_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_a2m.clk,
+};
+
+static struct clksrc_sources clkset_hclk_sys = {
+	.sources	= clkset_hclk_sys_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_sys_list),
+};
+
+static struct clksrc_clk clk_hclk_dsys = {
+	.clk	= {
+		.name	= "hclk_dsys",
+		.id	= -1,
+	},
+	.sources	= &clkset_hclk_sys,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_dsys = {
+	.clk	= {
+		.name	= "pclk_dsys",
+		.id	= -1,
+		.parent	= &clk_hclk_dsys.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_psys = {
+	.clk	= {
+		.name	= "hclk_psys",
+		.id	= -1,
+	},
+	.sources	= &clkset_hclk_sys,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_psys = {
+	.clk	= {
+		.name	= "pclk_psys",
+		.id	= -1,
+		.parent	= &clk_hclk_psys.clk,
+	},
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+};
+
+static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
+static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
+}
+
+static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
+}
+
+static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
+}
+
+static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
+}
+
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
+static struct clk clk_sclk_hdmi27m = {
+	.name		= "sclk_hdmi27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static struct clk clk_sclk_hdmiphy = {
+	.name		= "sclk_hdmiphy",
+	.id		= -1,
+};
+
+static struct clk clk_sclk_usbphy0 = {
+	.name		= "sclk_usbphy0",
+	.id		= -1,
+};
+
+static struct clk clk_sclk_usbphy1 = {
+	.name		= "sclk_usbphy1",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk0 = {
+	.name		= "pcmcdclk",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk1 = {
+	.name		= "pcmcdclk",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk2 = {
+	.name		= "pcmcdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_vpllsrc_list[] = {
+	[0] = &clk_fin_vpll,
+	[1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+	.sources	= clkset_vpllsrc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+	.clk	= {
+		.name		= "vpll_src",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 7),
+	},
+	.sources	= &clkset_vpllsrc,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+	[0] = &clk_vpllsrc.clk,
+	[1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+	.sources	= clkset_sclk_vpll_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+	.clk	= {
+		.name		= "sclk_vpll",
+		.id		= -1,
+	},
+	.sources	= &clkset_sclk_vpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk_ops clk_hclk_imem_ops = {
+	.get_rate	= s5pv210_clk_imem_get_rate,
+};
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "rot",
+		.id		= -1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<0),
+	}, {
+		.name		= "cfcon",
+		.id		= 0,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip1_ctrl,
+		.ctrlbit	= (1<<25),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 3,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip2_ctrl,
+		.ctrlbit	= (1<<19),
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<16),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<22),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<15),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<7),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<8),
+	}, {
+		.name		= "i2c",
+		.id		= 2,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<9),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<12),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<13),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<14),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<23),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<24),
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<21),
+	}, {
+		.name		= "i2s_v50",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1<<4),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "i2s_v32",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 6),
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "hclk_imem",
+		.id		= -1,
+		.parent		= &clk_hclk_msys.clk,
+		.ctrlbit	= (1 << 5),
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ops		= &clk_hclk_imem_ops,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_psys.clk,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 20),
+	},
+};
+
+static struct clk *clkset_uart_list[] = {
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_group1_list[] = {
+	[0] = &clk_sclk_a2m.clk,
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_mout_epll.clk,
+	[3] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_sclk_onenand_list[] = {
+	[0] = &clk_hclk_psys.clk,
+	[1] = &clk_hclk_dsys.clk,
+};
+
+static struct clksrc_sources clkset_sclk_onenand = {
+	.sources	= clkset_sclk_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_onenand_list),
+};
+
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 2),
+	},
+	.sources	= &clkset_sclk_dac,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
+		.id		= -1,
+		.parent		= &clk_sclk_vpll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4},
+};
+
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources	= &clkset_sclk_hdmi,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk0,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 0,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 24),
+	},
+	.sources = &clkset_sclk_audio0,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio1_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk1,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio1 = {
+	.sources	= clkset_sclk_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio1_list),
+};
+
+static struct clksrc_clk clk_sclk_audio1 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 25),
+	},
+	.sources = &clkset_sclk_audio1,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio2_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk0,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio2 = {
+	.sources	= clkset_sclk_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio2_list),
+};
+
+static struct clksrc_clk clk_sclk_audio2 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 2,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 26),
+	},
+	.sources = &clkset_sclk_audio2,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 },
+};
+
+static struct clk *clkset_sclk_spdif_list[] = {
+	[0] = &clk_sclk_audio0.clk,
+	[1] = &clk_sclk_audio1.clk,
+	[2] = &clk_sclk_audio2.clk,
+};
+
+static struct clksrc_sources clkset_sclk_spdif = {
+	.sources	= clkset_sclk_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_spdif_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_xusbxti,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_dmc",
+			.id		= -1,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_onenand",
+			.id		= -1,
+		},
+		.sources = &clkset_sclk_onenand,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 13),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 14),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 3,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 15),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mixer",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 1),
+		},
+		.sources = &clkset_sclk_mixer,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spdif",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 27),
+		},
+		.sources = &clkset_sclk_spdif,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 2),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 3),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 3),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 5),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 9),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 10),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 3,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 11),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mfc",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_g2d",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_g3d",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_csis",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 6),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 17),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwi",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 29),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwm",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 19),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 },
+	},
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_armclk,
+	&clk_hclk_msys,
+	&clk_sclk_a2m,
+	&clk_hclk_dsys,
+	&clk_hclk_psys,
+	&clk_pclk_msys,
+	&clk_pclk_dsys,
+	&clk_pclk_psys,
+	&clk_vpllsrc,
+	&clk_sclk_vpll,
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
+};
+
+void __init_or_cpufreq s5pv210_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long vpllsrc;
+	unsigned long armclk;
+	unsigned long hclk_msys;
+	unsigned long hclk_dsys;
+	unsigned long hclk_psys;
+	unsigned long pclk_msys;
+	unsigned long pclk_dsys;
+	unsigned long pclk_psys;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long vpll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5P_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+				__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+	vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_vpll.rate = vpll;
+
+	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+			apll, mpll, epll, vpll);
+
+	armclk = clk_get_rate(&clk_armclk.clk);
+	hclk_msys = clk_get_rate(&clk_hclk_msys.clk);
+	hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk);
+	hclk_psys = clk_get_rate(&clk_hclk_psys.clk);
+	pclk_msys = clk_get_rate(&clk_pclk_msys.clk);
+	pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk);
+	pclk_psys = clk_get_rate(&clk_pclk_psys.clk);
+
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n"
+			 "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+			armclk, hclk_msys, hclk_dsys, hclk_psys,
+			pclk_msys, pclk_dsys, pclk_psys);
+
+	clk_f.rate = armclk;
+	clk_h.rate = hclk_psys;
+	clk_p.rate = pclk_psys;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
+	&clk_pcmcdclk0,
+	&clk_pcmcdclk1,
+	&clk_pcmcdclk2,
+};
+
+void __init s5pv210_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 0000000..411a4a9
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,142 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+#include <plat/iic-core.h>
+#include <plat/sdhci.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC3,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC3),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
+};
+
+static void s5pv210_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+#ifdef CONFIG_S3C_DEV_ADC
+	s3c_device_adc.name	= "s3c64xx-adc";
+#endif
+
+	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+
+	/* initialise device information early */
+	s5pv210_default_sdhci0();
+	s5pv210_default_sdhci1();
+	s5pv210_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5pv210_register_clocks();
+	s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+	u32 vic[4];	/* S5PV210 supports 4 VIC */
+
+	/* All the VICs are fully populated. */
+	vic[0] = ~0;
+	vic[1] = ~0;
+	vic[2] = ~0;
+	vic[3] = ~0;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5pv210_sysclass = {
+	.name	= "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+	.cls	= &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+	return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+	printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5pv210_idle;
+
+	return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
new file mode 100644
index 0000000..6e21533
--- /dev/null
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -0,0 +1,327 @@
+/* linux/arch/arm/mach-s5pv210/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pv210_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+		break;
+
+	case -1:
+		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5pv210_cfg_i2s,
+};
+
+static struct resource s5pv210_iis0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS0,
+		.end   = S5PV210_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
+	.resource	  = s5pv210_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pv210_iis1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS1,
+		.end   = S5PV210_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
+	.resource	  = s5pv210_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pv210_iis2_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS2,
+		.end   = S5PV210_PA_IIS2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis2 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
+	.resource	  = s5pv210_iis2_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+		break;
+	case 2:
+		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pv210_pcm_cfg_gpio,
+};
+
+static struct resource s5pv210_pcm0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM0,
+		.end   = S5PV210_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm0_resource),
+	.resource	  = s5pv210_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv210_pcm1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM1,
+		.end   = S5PV210_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm1_resource),
+	.resource	  = s5pv210_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv210_pcm2_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM2,
+		.end   = S5PV210_PA_PCM2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM2_TX,
+		.end   = DMACH_PCM2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM2_RX,
+		.end   = DMACH_PCM2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm2 = {
+	.name		  = "samsung-pcm",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm2_resource),
+	.resource	  = s5pv210_pcm2_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pv210_ac97_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_AC97,
+		.end   = S5PV210_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pv210_ac97_cfg_gpio,
+};
+
+static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_ac97_resource),
+	.resource	  = s5pv210_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pv210_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c
new file mode 100644
index 0000000..34997b7
--- /dev/null
+++ b/arch/arm/mach-s5pv210/dev-onenand.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/mach-s5pv210/dev-onenand.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC110 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s5pc110_onenand_resources[] = {
+	[0] = {
+		.start	= S5PC110_PA_ONENAND,
+		.end	= S5PC110_PA_ONENAND + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5PC110_PA_ONENAND_DMA,
+		.end	= S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s5pc110_device_onenand = {
+	.name		= "s5pc110-onenand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pc110_onenand_resources),
+	.resource	= s5pc110_onenand_resources,
+};
+
+void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s5pc110_device_onenand.dev.platform_data = pd;
+}
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
new file mode 100644
index 0000000..337a62b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -0,0 +1,178 @@
+/* linux/arch/arm/mach-s5pv210/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5PV210_SPI_SRCCLK_PCLK] = "pclk",
+	[S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5pv210_spi0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_SPI0,
+		.end   = S5PV210_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
+	.cfg_gpio = s5pv210_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+	.high_speed = 1,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv210_spi0_resource),
+	.resource	  = s5pv210_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_spi0_pdata,
+	},
+};
+
+static struct resource s5pv210_spi1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_SPI1,
+		.end   = S5PV210_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
+	.cfg_gpio = s5pv210_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 15,
+	.high_speed = 1,
+};
+
+struct platform_device s5pv210_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_spi1_resource),
+	.resource	  = s5pv210_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_spi1_pdata,
+	},
+};
+
+void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5pv210_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5pv210_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
new file mode 100644
index 0000000..778ad5f
--- /dev/null
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv210_pdma0_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA0,
+		.end    = S5PV210_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_AC97_MICIN,
+		[23] = DMACH_AC97_PCMIN,
+		[24] = DMACH_AC97_PCMOUT,
+		[25] = DMACH_MAX,
+		[26] = DMACH_PWM,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_MAX,
+		[29] = DMACH_MAX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
+	.resource	= s5pv210_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma0_pdata,
+	},
+};
+
+static struct resource s5pv210_pdma1_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA1,
+		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_PCM0_RX,
+		[23] = DMACH_PCM0_TX,
+		[24] = DMACH_PCM1_RX,
+		[25] = DMACH_PCM1_TX,
+		[26] = DMACH_MSM_REQ0,
+		[27] = DMACH_MSM_REQ1,
+		[28] = DMACH_MSM_REQ2,
+		[29] = DMACH_MSM_REQ3,
+		[30] = DMACH_PCM2_RX,
+		[31] = DMACH_PCM2_TX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
+	.resource	= s5pv210_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pv210_dmacs[] __initdata = {
+	&s5pv210_device_pdma0,
+	&s5pv210_device_pdma1,
+};
+
+static int __init s5pv210_dma_init(void)
+{
+	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pv210_dma_init);
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
new file mode 100644
index 0000000..9ea8972
--- /dev/null
+++ b/arch/arm/mach-s5pv210/gpiolib.c
@@ -0,0 +1,261 @@
+/* linux/arch/arm/mach-s5pv210/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/* GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in v210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	},
+};
+
+static __init int s5pv210_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
+	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+	int i = 0;
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+		if (chip->base == NULL)
+			chip->base = S5PV210_BANK_BASE(i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+
+	return 0;
+}
+core_initcall(s5pv210_gpiolib_init);
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
new file mode 100644
index 0000000..7872f5c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx, tmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h
new file mode 100644
index 0000000..81209eb
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 0000000..3aa41ac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic3
+	addeq	\tmp, \base, #(VA_VIC3 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 0000000..d6461ba
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,141 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR	(8)
+#define S5PV210_GPIO_A1_NR	(4)
+#define S5PV210_GPIO_B_NR	(8)
+#define S5PV210_GPIO_C0_NR	(5)
+#define S5PV210_GPIO_C1_NR	(5)
+#define S5PV210_GPIO_D0_NR	(4)
+#define S5PV210_GPIO_D1_NR	(6)
+#define S5PV210_GPIO_E0_NR	(8)
+#define S5PV210_GPIO_E1_NR	(5)
+#define S5PV210_GPIO_F0_NR	(8)
+#define S5PV210_GPIO_F1_NR	(8)
+#define S5PV210_GPIO_F2_NR	(8)
+#define S5PV210_GPIO_F3_NR	(6)
+#define S5PV210_GPIO_G0_NR	(7)
+#define S5PV210_GPIO_G1_NR	(7)
+#define S5PV210_GPIO_G2_NR	(7)
+#define S5PV210_GPIO_G3_NR	(7)
+#define S5PV210_GPIO_H0_NR	(8)
+#define S5PV210_GPIO_H1_NR	(8)
+#define S5PV210_GPIO_H2_NR	(8)
+#define S5PV210_GPIO_H3_NR	(8)
+#define S5PV210_GPIO_I_NR	(7)
+#define S5PV210_GPIO_J0_NR	(8)
+#define S5PV210_GPIO_J1_NR	(6)
+#define S5PV210_GPIO_J2_NR	(8)
+#define S5PV210_GPIO_J3_NR	(8)
+#define S5PV210_GPIO_J4_NR	(5)
+
+#define S5PV210_GPIO_MP01_NR	(8)
+#define S5PV210_GPIO_MP02_NR	(4)
+#define S5PV210_GPIO_MP03_NR	(8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5PV210_GPIO_A0_START	= 0,
+	S5PV210_GPIO_A1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+	S5PV210_GPIO_B_START 	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+	S5PV210_GPIO_C0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+	S5PV210_GPIO_C1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+	S5PV210_GPIO_D0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+	S5PV210_GPIO_D1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+	S5PV210_GPIO_E0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+	S5PV210_GPIO_E1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+	S5PV210_GPIO_F0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+	S5PV210_GPIO_F1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+	S5PV210_GPIO_F2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+	S5PV210_GPIO_F3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+	S5PV210_GPIO_G0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+	S5PV210_GPIO_G1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+	S5PV210_GPIO_G2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+	S5PV210_GPIO_G3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+	S5PV210_GPIO_H0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+	S5PV210_GPIO_H1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+	S5PV210_GPIO_H2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+	S5PV210_GPIO_H3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+	S5PV210_GPIO_I_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+	S5PV210_GPIO_J0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+	S5PV210_GPIO_J1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
+	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
+	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr)	(S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr)	(S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr)	(S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr)	(S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr)	(S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr)	(S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr)	(S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr)	(S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr)	(S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr)	(S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr)	(S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr)	(S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr)	(S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr)	(S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr)	(S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr)	(S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr)	(S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr)	(S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr)	(S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr)	(S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr)	(S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr)	(S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr)	(S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr)	(S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
+#define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
+#define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
+#define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S3C_GPIO_END		S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the MP03() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 0000000..fada7a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h
new file mode 100644
index 0000000..5ab9d56
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
new file mode 100644
index 0000000..9689537
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: System, DMA, Timer */
+
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+#define IRQ_FIMC3		S5P_IRQ_VIC0(31)
+
+/* VIC1: ARM, Power, Memory, Connectivity, Storage */
+
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+#define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
+
+/* VIC2: Multimedia, Audio, Security */
+
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+
+/* VIC3: Etc */
+
+#define IRQ_IPC			S5P_IRQ_VIC3(0)
+#define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
+#define IRQ_MMC3		S5P_IRQ_VIC3(2)
+#define IRQ_CEC			S5P_IRQ_VIC3(3)
+#define IRQ_TSI			S5P_IRQ_VIC3(4)
+#define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
+#define IRQ_MDNIE1		S5P_IRQ_VIC3(6)
+#define IRQ_MDNIE2		S5P_IRQ_VIC3(7)
+#define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
+#define IRQ_VIC_END		S5P_IRQ_VIC3(31)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
+
+/* Set the default NR_IRQS */
+#define NR_IRQS			(IRQ_EINT(31) + 1)
+
+/* Compatibility */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 0000000..34eb168
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PC110_PA_ONENAND	(0xB0000000)
+#define S5PC110_PA_ONENAND_DMA	(0xB0600000)
+
+#define S5PV210_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5PV210_PA_CHIPID
+
+#define S5PV210_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PV210_PA_SYSCON
+
+#define S5PV210_PA_GPIO		(0xE0200000)
+#define S5P_PA_GPIO		S5PV210_PA_GPIO
+
+/* SPI */
+#define S5PV210_PA_SPI0		0xE1300000
+#define S5PV210_PA_SPI1		0xE1400000
+
+#define S5PV210_PA_IIC0		(0xE1800000)
+#define S5PV210_PA_IIC1		(0xFAB00000)
+#define S5PV210_PA_IIC2		(0xE1A00000)
+
+#define S5PV210_PA_TIMER	(0xE2500000)
+#define S5P_PA_TIMER		S5PV210_PA_TIMER
+
+#define S5PV210_PA_SYSTIMER	(0xE2600000)
+
+#define S5PV210_PA_WATCHDOG	(0xE2700000)
+
+#define S5PV210_PA_UART		(0xE2900000)
+
+#define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PV210_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PV210_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PV210_PA_UART + 0xC00)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5PV210_PA_SROMC	(0xE8000000)
+
+#define S5PV210_PA_MDMA		0xFA200000
+#define S5PV210_PA_PDMA0	0xE0900000
+#define S5PV210_PA_PDMA1	0xE0A00000
+
+#define S5PV210_PA_FB		(0xF8000000)
+
+#define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
+
+#define S5PV210_PA_VIC0		(0xF2000000)
+#define S5P_PA_VIC0		S5PV210_PA_VIC0
+
+#define S5PV210_PA_VIC1		(0xF2100000)
+#define S5P_PA_VIC1		S5PV210_PA_VIC1
+
+#define S5PV210_PA_VIC2		(0xF2200000)
+#define S5P_PA_VIC2		S5PV210_PA_VIC2
+
+#define S5PV210_PA_VIC3		(0xF2300000)
+#define S5P_PA_VIC3		S5PV210_PA_VIC3
+
+#define S5PV210_PA_SDRAM	(0x20000000)
+#define S5P_PA_SDRAM		S5PV210_PA_SDRAM
+
+/* I2S */
+#define S5PV210_PA_IIS0		0xEEE30000
+#define S5PV210_PA_IIS1		0xE2100000
+#define S5PV210_PA_IIS2		0xE2A00000
+
+/* PCM */
+#define S5PV210_PA_PCM0		0xE2300000
+#define S5PV210_PA_PCM1		0xE1200000
+#define S5PV210_PA_PCM2		0xE2B00000
+
+/* AC97 */
+#define S5PV210_PA_AC97		0xE2200000
+
+#define S5PV210_PA_ADC		(0xE1700000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART		S5PV210_PA_UART
+#define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
+#define S3C_PA_IIC		S5PV210_PA_IIC0
+#define S3C_PA_IIC1		S5PV210_PA_IIC1
+#define S3C_PA_IIC2		S5PV210_PA_IIC2
+#define S3C_PA_FB		S5PV210_PA_FB
+#define S3C_PA_WDT		S5PV210_PA_WATCHDOG
+
+#define SAMSUNG_PA_ADC		S5PV210_PA_ADC
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 0000000..379117e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
new file mode 100644
index 0000000..f8a9f1b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5PV210 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
new file mode 100644
index 0000000..2a25ab4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -0,0 +1,170 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7		S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0	S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1	S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2	S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0	S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1	S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1		S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2		S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4		S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK	S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG		S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK 	S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG		S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG	S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ		S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE		S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE		S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE		S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE	S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT	S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS		S5P_CLKREG(0xE000)
+#define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
+#define S5P_DAC_CONTROL		S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0		S5P_CLKREG(0xF000)
+#define S5P_INFORM1		S5P_CLKREG(0xF004)
+#define S5P_INFORM2		S5P_CLKREG(0xF008)
+#define S5P_INFORM3		S5P_CLKREG(0xF00C)
+#define S5P_INFORM4		S5P_CLKREG(0xF010)
+#define S5P_INFORM5		S5P_CLKREG(0xF014)
+#define S5P_INFORM6		S5P_CLKREG(0xF018)
+#define S5P_INFORM7		S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT		S5P_CLKREG(0xA000)
+#define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
+#define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
+#define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
+
+#define S5P_IDLE_CFG_TL_MASK	(3 << 30)
+#define S5P_IDLE_CFG_TM_MASK	(3 << 28)
+#define S5P_IDLE_CFG_TL_ON	(2 << 30)
+#define S5P_IDLE_CFG_TM_ON	(2 << 28)
+#define S5P_IDLE_CFG_DIDLE	(1 << 0)
+
+#define S5P_CFG_WFI_CLEAN		(~(3 << 8))
+#define S5P_CFG_WFI_IDLE		(1 << 8)
+#define S5P_CFG_WFI_STOP		(2 << 8)
+#define S5P_CFG_WFI_SLEEP		(3 << 8)
+
+#define S5P_OTHER_SYS_INT		24
+#define S5P_OTHER_STA_TYPE		23
+#define S5P_OTHER_SYSC_INTOFF		(1 << 0)
+#define STA_TYPE_EXPON			0
+#define STA_TYPE_SFR			1
+
+#define S5P_PWR_STA_EXP_SCALE		0
+#define S5P_PWR_STA_CNT			4
+
+#define S5P_PWR_STABLE_COUNT		85500
+
+#define S5P_SLEEP_CFG_OSC_EN		(1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
+#define S5P_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI */
+#define S5P_MIPI_DPHY_EN		(3)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE			(1)
+#define S5P_DAC_DISABLE			(0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-fb.h b/arch/arm/mach-s5pv210/include/mach/regs-fb.h
new file mode 100644
index 0000000..60d9929
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-fb.h
@@ -0,0 +1,21 @@
+/* 
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Dummy framebuffer to allow build for the moment.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	return 0x2400 + (window * 256 *4 ) + reg;
+}
+
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
new file mode 100644
index 0000000..49e029b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV210_EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PV210_EINT30CON + ((x) * 0x4))
+
+#define S5PV210_EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PV210_EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PV210_EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PV210_EINT30MASK + ((x) * 0x4))
+
+#define S5PV210_EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PV210_EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#define EINT_MODE		S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x)		S5PV210_GPH0(x)
+#define EINT_GPIO_1(x)		S5PV210_GPH1(x)
+#define EINT_GPIO_2(x)		S5PV210_GPH2(x)
+#define EINT_GPIO_3(x)		S5PV210_GPH3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
new file mode 100644
index 0000000..5c3b104
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
new file mode 100644
index 0000000..02acded
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5PV210_PLAT_SPI_CLKS_H
+#define __S5PV210_PLAT_SPI_CLKS_H __FILE__
+
+#define S5PV210_SPI_SRCCLK_PCLK		0
+#define S5PV210_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5PV210_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 0000000..1ca04d5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
new file mode 100644
index 0000000..7993b36
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5PV210 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
new file mode 100644
index 0000000..73dc854
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/timex.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV210 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 0000000..08ff2fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
new file mode 100644
index 0000000..58f515e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * S5PV210 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
new file mode 100644
index 0000000..4865ae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5pv210_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
new file mode 100644
index 0000000..10bc76e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5pv210/mach-aquila.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win aquila_fb_win0 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_pd_win aquila_fb_win1 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
+	.win[0]		= &aquila_fb_win0,
+	.win[1]		= &aquila_fb_win1,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+static struct platform_device *aquila_devices[] __initdata = {
+	&s3c_device_fb,
+};
+
+static void __init aquila_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init aquila_machine_init(void)
+{
+	/* FB */
+	s3c_fb_set_platdata(&aquila_lcd_pdata);
+
+	platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
+}
+
+MACHINE_START(AQUILA, "Aquila")
+	/* Maintainers:
+	   Marek Szyprowski <m.szyprowski@samsung.com>
+	   Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= aquila_map_io,
+	.init_machine	= aquila_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
new file mode 100644
index 0000000..4863b13
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-goni.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *goni_devices[] __initdata = {
+};
+
+static void __init goni_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+}
+
+static void __init goni_machine_init(void)
+{
+	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+}
+
+MACHINE_START(GONI, "GONI")
+	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= goni_map_io,
+	.init_machine	= goni_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
new file mode 100644
index 0000000..4c8903c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -0,0 +1,101 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkc110_devices[] __initdata = {
+	&s5pv210_device_iis0,
+	&s5pv210_device_ac97,
+	&s3c_device_wdt,
+};
+
+static void __init smdkc110_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkc110_machine_init(void)
+{
+	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
+}
+
+MACHINE_START(SMDKC110, "SMDKC110")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkc110_map_io,
+	.init_machine	= smdkc110_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
new file mode 100644
index 0000000..0d46279
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdkv210_devices[] __initdata = {
+	&s5pv210_device_iis0,
+	&s5pv210_device_ac97,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdkv210_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkv210_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+}
+
+MACHINE_START(SMDKV210, "SMDKV210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= smdkv210_map_io,
+	.init_machine	= smdkv210_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
new file mode 100644
index 0000000..a50cbac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base s5pv210 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* Set DISPLAY_CONTROL register for Display path selection.
+	 *
+	 * ouput   |   RGB   |   I80   |   ITU
+	 * -----------------------------------
+	 *  00     |   MIE   |  FIMD   |  FIMD
+	 *  01     | MDNIE   | MDNIE   |  FIMD
+	 *  10     |  FIMD   |  FIMD   |  FIMD
+	 *  11     |  FIMD   |  FIMD   |  FIMD
+	 */
+	writel(0x2, S5P_MDNIE_SEL);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
new file mode 100644
index 0000000..c718253
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
new file mode 100644
index 0000000..45e0e6e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
new file mode 100644
index 0000000..b11b4bf
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C2 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
new file mode 100644
index 0000000..fe7d86d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
+	for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+	switch (width) {
+	case 8:
+		/* GPG1[3:6] special-funtion 3 */
+		for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* GPG0[3:6] special-funtion 2 */
+		for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Data pin GPG1[3:6] to special-function 2 */
+	for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	switch (width) {
+	case 8:
+		/* Data pin GPG3[3:6] to special-function 3 */
+		for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* Data pin GPG2[3:6] to special-function 2 */
+		for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
new file mode 100644
index 0000000..51815ec
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv210_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",		/* HCLK */
+	[1] = "hsmmc",		/* HCLK */
+	[2] = "sclk_mmc",	/* mmc_bus */
+	/*[4] = reserved */
+};
+
+void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index b17d52f..fd4c52b 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -57,7 +57,7 @@ config SA1100_COLLIE
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -68,7 +68,7 @@ config SA1100_H3100
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 051ec0f..259cb2c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,6 +51,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -59,6 +63,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9982c5c..5d5f330 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -234,6 +234,10 @@ static struct resource locomo_resources[] = {
 	},
 };
 
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
 struct platform_device collie_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 63b32b6..7252874 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void)
 	struct sdram_params *sdram;
 	const char *name = sdram_name;
 
+	if (!cpu_is_sa1110())
+		return -ENODEV;
+
 	if (!name[0]) {
 		if (machine_is_assabet())
 			name = "TC59SM716-CL3";
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 71a0b3f..52acda7 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -72,13 +72,6 @@
 #define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
 
-#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
-
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
 #define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
 #define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d..336adcc 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80..8c8845b 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
 #define IRQ_BOARD_START		49
 #define IRQ_BOARD_END		65
 
-#define IRQ_SA1111_START	(IRQ_BOARD_END)
-#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
-#define SSPXMTINT		(IRQ_BOARD_END + 24)
-#define SSPRCVINT		(IRQ_BOARD_END + 25)
-#define SSPROR			(IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
-#define AUDTFSR			(IRQ_BOARD_END + 36)
-#define AUDRFSR			(IRQ_BOARD_END + 37)
-#define AUDTUR			(IRQ_BOARD_END + 38)
-#define AUDROR			(IRQ_BOARD_END + 39)
-#define AUDDTS			(IRQ_BOARD_END + 40)
-#define AUDRDD			(IRQ_BOARD_END + 41)
-#define AUDSTO			(IRQ_BOARD_END + 42)
-#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
-#define IRQ_HCIM		(IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS			(IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS			(IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
@@ -166,10 +90,3 @@
 #define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
index ec8fdc5..b3d0023 100644
--- a/arch/arm/mach-sa1100/include/mach/vmalloc.h
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-sa1100/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (0xe8000000)
+#define VMALLOC_END       (0xe8000000UL)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 13ebd2d..d3ec620 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -208,6 +208,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -216,6 +220,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 506a5e5..9d490c6 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -18,7 +18,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <mach/jornada720.h>
@@ -130,7 +129,7 @@ void jornada_ssp_end(void)
 };
 EXPORT_SYMBOL(jornada_ssp_end);
 
-static int __init jornada_ssp_probe(struct platform_device *dev)
+static int __devinit jornada_ssp_probe(struct platform_device *dev)
 {
 	int ret;
 
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
index 4cf7c56..bbfe197 100644
--- a/arch/arm/mach-sa1100/leds.c
+++ b/arch/arm/mach-sa1100/leds.c
@@ -2,7 +2,7 @@
  * linux/arch/arm/mach-sa1100/leds.c
  *
  * SA1100 LEDs dispatcher
- * 
+ *
  * Copyright (C) 2001 Nicolas Pitre
  */
 #include <linux/compiler.h>
@@ -18,10 +18,10 @@ sa1100_leds_init(void)
 {
 	if (machine_is_assabet())
 		leds_event = assabet_leds_event;
- 	if (machine_is_consus())
- 	        leds_event = consus_leds_event;
+	if (machine_is_consus())
+		leds_event = consus_leds_event;
 	if (machine_is_badge4())
-	  	leds_event = badge4_leds_event;
+		leds_event = badge4_leds_event;
 	if (machine_is_brutus())
 		leds_event = brutus_leds_event;
 	if (machine_is_cerf())
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6ccd175..c601a75 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -8,7 +8,6 @@
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
-#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -241,6 +240,10 @@ static struct resource sa1111_resources[] = {
 	},
 };
 
+static struct sa1111_platform_data sa1111_info = {
+	.irq_base	= IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -249,6 +252,7 @@ static struct platform_device sa1111_device = {
 	.dev		= {
 		.dma_mask = &sa1111_dmamask,
 		.coherent_dma_mask = 0xffffffff,
+		.platform_data = &sa1111_info,
 	},
 	.num_resources	= ARRAY_SIZE(sa1111_resources),
 	.resource	= sa1111_resources,
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index b9cbb56..74b6e0e 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -35,14 +35,12 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
 static int
 sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 {
-	unsigned long flags, next, oscr;
+	unsigned long next, oscr;
 
-	raw_local_irq_save(flags);
 	OIER |= OIER_E0;
 	next = OSCR + delta;
 	OSMR0 = next;
 	oscr = OSCR;
-	raw_local_irq_restore(flags);
 
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -50,16 +48,12 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 static void
 sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
 {
-	unsigned long flags;
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_ONESHOT:
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		raw_local_irq_save(flags);
 		OIER &= ~OIER_E0;
 		OSSR = OSSR_M0;
-		raw_local_irq_restore(flags);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index f97a762..5ea24d4 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xe0000000
 		orr	\rx, \rx, #0x000003f8
 		.endm
@@ -20,6 +20,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
index 37a7112..89d175c 100644
--- a/arch/arm/mach-shark/pci.c
+++ b/arch/arm/mach-shark/pci.c
@@ -16,16 +16,19 @@
 static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->bus->number == 0)
-		if (dev->devfn == 0) return 255;
-		else return 11;
-	else return 255;
+		if (dev->devfn == 0)
+			return 255;
+		else
+			return 11;
+	else
+		return 255;
 }
 
 extern void __init via82c505_preinit(void);
 
 static struct hw_pci shark_pci __initdata = {
 	.setup		= via82c505_setup,
-	.swizzle     	= pci_std_swizzle,
+	.swizzle	= pci_std_swizzle,
 	.map_irq	= shark_map_irq,
 	.nr_controllers = 1,
 	.scan		= via82c505_scan_bus,
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
new file mode 100644
index 0000000..f2b88c5
--- /dev/null
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -0,0 +1,81 @@
+if ARCH_SHMOBILE
+
+comment "SH-Mobile System Type"
+
+config ARCH_SH7367
+	bool "SH-Mobile G3 (SH7367)"
+	select CPU_V6
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7377
+	bool "SH-Mobile G4 (SH7377)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7372
+	bool "SH-Mobile AP4 (SH7372)"
+	select CPU_V7
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+
+comment "SH-Mobile Board Type"
+
+config MACH_G3EVM
+	bool "G3EVM board"
+	depends on ARCH_SH7367
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_G4EVM
+	bool "G4EVM board"
+	depends on ARCH_SH7377
+	select ARCH_REQUIRE_GPIOLIB
+
+config MACH_AP4EVB
+	bool "AP4EVB board"
+	depends on ARCH_SH7372
+	select ARCH_REQUIRE_GPIOLIB
+
+comment "SH-Mobile System Configuration"
+
+menu "Memory configuration"
+
+config MEMORY_START
+	hex "Physical memory start address"
+	default "0x50000000" if MACH_G3EVM
+	default "0x40000000" if MACH_G4EVM
+	default "0x40000000" if MACH_AP4EVB
+	default "0x00000000"
+	---help---
+	  Tweak this only when porting to a new machine which does not
+	  already have a defconfig. Changing it from the known correct
+	  value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+	hex "Physical memory size"
+	default "0x08000000" if MACH_G3EVM
+	default "0x08000000" if MACH_G4EVM
+	default "0x10000000" if MACH_AP4EVB
+	default "0x04000000"
+	help
+	  This sets the default memory size assumed by your kernel. It can
+	  be overridden as normal by the 'mem=' argument on the kernel command
+	  line.
+
+endmenu
+
+menu "Timer and clock configuration"
+
+config SH_TIMER_CMT
+	bool "CMT timer driver"
+	default y
+	help
+	  This enables build of the CMT timer driver.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
new file mode 100644
index 0000000..6d385d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common objects
+obj-y				:= timer.o console.o
+
+# CPU objects
+obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
+obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7367.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7367.o intc-sh7372.o
+
+# Pinmux setup
+pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377)	:= pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372)	:= pfc-sh7372.o
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
+
+# Board objects
+obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
+obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
+obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
new file mode 100644
index 0000000..1c08ee9
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -0,0 +1,9 @@
+__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+
+   zreladdr-y   := $(__ZRELADDR)
+
+# Unsupported legacy stuff
+#
+#params_phys-y (Instead: Pass atags pointer in r2)
+#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
new file mode 100644
index 0000000..1c2ec96
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -0,0 +1,333 @@
+/*
+ * AP4EVB board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/common.h>
+#include <mach/sh7372.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * Address	Interface		BusWidth	note
+ * ------------------------------------------------------------------
+ * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
+ * 0x0800_0000	user area		-
+ * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
+ * 0x1400_0000	Ether (LAN9220)		16bit
+ * 0x1600_0000	user area		-		cannot use with NAND
+ * 0x1800_0000	user area		-
+ * 0x1A00_0000	-
+ * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
+ */
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1		SMSC 9220
+ * -----------------------
+ *  ON		access disable
+ *  OFF		access enable
+ */
+
+/*
+ * KEYSC
+ *
+ * SW43		KEYSC
+ * -------------------------
+ * ON		enable
+ * OFF		disable
+ */
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* SMSC 9220 */
+static struct resource smc911x_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x16000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 6,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(smc911x_resources),
+	.resource       = smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 2500,
+	.keycodes = {
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b0063,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* SDHI0 */
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6850000,
+		.end    = 0xe68501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+};
+
+static struct platform_device *ap4evb_devices[] __initdata = {
+	&nor_flash_device,
+	&smc911x_device,
+	&keysc_device,
+	&sdhi0_device,
+};
+
+static struct map_desc ap4evb_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init ap4evb_map_io(void)
+{
+	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7372_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init ap4evb_init(void)
+{
+	sh7372_pinmux_init();
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_FN_CS5A,	NULL);
+	gpio_request(GPIO_FN_IRQ6_39,	NULL);
+
+	/* enable LED 1 - 4 */
+	gpio_request(GPIO_PORT185, NULL);
+	gpio_request(GPIO_PORT186, NULL);
+	gpio_request(GPIO_PORT187, NULL);
+	gpio_request(GPIO_PORT188, NULL);
+	gpio_direction_output(GPIO_PORT185, 1);
+	gpio_direction_output(GPIO_PORT186, 1);
+	gpio_direction_output(GPIO_PORT187, 1);
+	gpio_direction_output(GPIO_PORT188, 1);
+	gpio_export(GPIO_PORT185, 0);
+	gpio_export(GPIO_PORT186, 0);
+	gpio_export(GPIO_PORT187, 0);
+	gpio_export(GPIO_PORT188, 0);
+
+	/* enable Debug switch (S6) */
+	gpio_request(GPIO_PORT32, NULL);
+	gpio_request(GPIO_PORT33, NULL);
+	gpio_request(GPIO_PORT34, NULL);
+	gpio_request(GPIO_PORT35, NULL);
+	gpio_direction_input(GPIO_PORT32);
+	gpio_direction_input(GPIO_PORT33);
+	gpio_direction_input(GPIO_PORT34);
+	gpio_direction_input(GPIO_PORT35);
+	gpio_export(GPIO_PORT32, 0);
+	gpio_export(GPIO_PORT33, 0);
+	gpio_export(GPIO_PORT34, 0);
+	gpio_export(GPIO_PORT35, 0);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYIN0_136, NULL);
+	gpio_request(GPIO_FN_KEYIN1_135, NULL);
+	gpio_request(GPIO_FN_KEYIN2_134, NULL);
+	gpio_request(GPIO_FN_KEYIN3_133, NULL);
+	gpio_request(GPIO_FN_KEYIN4,     NULL);
+
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+	sh7372_add_standard_devices();
+
+	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+}
+
+MACHINE_START(AP4EVB, "ap4evb")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= ap4evb_map_io,
+	.init_irq	= sh7372_init_irq,
+	.init_machine	= ap4evb_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
new file mode 100644
index 0000000..9247503
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -0,0 +1,333 @@
+/*
+ * G3EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/sh7367.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
+		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
+		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
+		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
+		KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "system",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "userdata",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128 * 1024 * 1024,
+	},
+	{
+		.name	= "cache",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 64 * 1024 * 1024,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xe6a30000,
+		.end	= 0xe6a3009b,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
+			| SHBUSSEL | SEL_16BIT,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
+static struct platform_device *g3evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+	&keysc_device,
+	&nand_flash_device,
+};
+
+static struct map_desc g3evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g3evm_map_io(void)
+{
+	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7367_add_early_devices();
+	sh7367_clock_init();
+	shmobile_setup_console();
+}
+
+static void __init g3evm_init(void)
+{
+	sh7367_pinmux_init();
+
+	/* Lit DS4 LED */
+	gpio_request(GPIO_PORT22, NULL);
+	gpio_direction_output(GPIO_PORT22, 1);
+	gpio_export(GPIO_PORT22, 0);
+
+	/* Lit DS8 LED */
+	gpio_request(GPIO_PORT23, NULL);
+	gpio_direction_output(GPIO_PORT23, 1);
+	gpio_export(GPIO_PORT23, 0);
+
+	/* Lit DS3 LED */
+	gpio_request(GPIO_PORT24, NULL);
+	gpio_direction_output(GPIO_PORT24, 1);
+	gpio_export(GPIO_PORT24, 0);
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
+	gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SYMSTPCR2 */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
+
+	/* setup USB phy */
+	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
+
+	/* KEYSC @ CN7 */
+	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE0, NULL);
+	gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
+	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+	/* FOE, FCDE, FSC on dedicated pins */
+	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
+
+	sh7367_add_standard_devices();
+
+	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
+}
+
+MACHINE_START(G3EVM, "g3evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g3evm_map_io,
+	.init_irq	= sh7367_init_irq,
+	.init_machine	= g3evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 0000000..10673a9
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,268 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip = 1,
+	.port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_5,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes = {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
+		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
+		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
+		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0xe61b0000,
+		.end    = 0xe61b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+	&nor_flash_device,
+	&usb_host_device,
+	&keysc_device,
+};
+
+static struct map_desc g4evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init g4evm_map_io(void)
+{
+	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+
+	/* setup early devices, clocks and console here as well */
+	sh7377_add_early_devices();
+	sh7367_clock_init(); /* use g3 clocks for now */
+	shmobile_setup_console();
+}
+
+static void __init g4evm_init(void)
+{
+	sh7377_pinmux_init();
+
+	/* Lit DS14 LED */
+	gpio_request(GPIO_PORT109, NULL);
+	gpio_direction_output(GPIO_PORT109, 1);
+	gpio_export(GPIO_PORT109, 1);
+
+	/* Lit DS15 LED */
+	gpio_request(GPIO_PORT110, NULL);
+	gpio_direction_output(GPIO_PORT110, 1);
+	gpio_export(GPIO_PORT110, 1);
+
+	/* Lit DS16 LED */
+	gpio_request(GPIO_PORT112, NULL);
+	gpio_direction_output(GPIO_PORT112, 1);
+	gpio_export(GPIO_PORT112, 1);
+
+	/* Lit DS17 LED */
+	gpio_request(GPIO_PORT113, NULL);
+	gpio_direction_output(GPIO_PORT113, 1);
+	gpio_export(GPIO_PORT113, 1);
+
+	/* USBHS */
+	gpio_request(GPIO_FN_VBUS_0, NULL);
+	gpio_request(GPIO_FN_PWEN, NULL);
+	gpio_request(GPIO_FN_OVCN, NULL);
+	gpio_request(GPIO_FN_OVCN2, NULL);
+	gpio_request(GPIO_FN_EXTLP, NULL);
+	gpio_request(GPIO_FN_IDIN, NULL);
+
+	/* enable clock in SMSTPCR3 */
+	__raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
+
+	/* setup USB phy */
+	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
+	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
+	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
+	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+
+	/* KEYSC @ CN31 */
+	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
+
+	sh7377_add_standard_devices();
+
+	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+	.phys_io	= 0xe6000000,
+	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
+	.map_io		= g4evm_map_io,
+	.init_irq	= sh7377_init_irq,
+	.init_machine	= g4evm_init,
+	.timer		= &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
new file mode 100644
index 0000000..bb940c6
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -0,0 +1,103 @@
+/*
+ * Preliminary clock framework support for sh7367
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+struct clk {
+	const char *name;
+	unsigned long rate;
+};
+
+#include <asm/clkdev.h>
+
+int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk ? clk->rate : 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* a static peripheral clock for now - enough to get sh-sci working */
+static struct clk peripheral_clk = {
+	.name	    = "peripheral_clk",
+	.rate	    = 48000000,
+};
+
+/* a static rclk for now - enough to get sh_cmt working */
+static struct clk r_clk = {
+	.name	    = "r_clk",
+	.rate	    = 32768,
+};
+
+/* a static usb0 for now - enough to get r8a66597 working */
+static struct clk usb0_clk = {
+	.name	    = "usb0",
+};
+
+/* a static keysc0 clk for now - enough to get sh_keysc working */
+static struct clk keysc0_clk = {
+	.name	    = "keysc0",
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		.clk = &peripheral_clk,
+	}, {
+		.clk = &r_clk,
+	}, {
+		.clk = &usb0_clk,
+	}, {
+		.clk = &keysc0_clk,
+	}
+};
+
+void __init sh7367_clock_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		lookups[i].con_id = lookups[i].clk->name;
+		clkdev_add(&lookups[i]);
+	}
+}
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
new file mode 100644
index 0000000..9411a5b
--- /dev/null
+++ b/arch/arm/mach-shmobile/console.c
@@ -0,0 +1,31 @@
+/*
+ * SH-Mobile Console
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
+
+void __init shmobile_setup_console(void)
+{
+	parse_early_param();
+
+	/* Let earlyprintk output early console messages */
+	early_platform_driver_probe("earlyprintk", 1, 1);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
new file mode 100644
index 0000000..36d0163
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
new file mode 100644
index 0000000..5790360
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -0,0 +1,23 @@
+#ifndef __ARCH_MACH_COMMON_H
+#define __ARCH_MACH_COMMON_H
+
+extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_console(void);
+
+extern void sh7367_init_irq(void);
+extern void sh7367_add_early_devices(void);
+extern void sh7367_add_standard_devices(void);
+extern void sh7367_clock_init(void);
+extern void sh7367_pinmux_init(void);
+
+extern void sh7377_init_irq(void);
+extern void sh7377_add_early_devices(void);
+extern void sh7377_add_standard_devices(void);
+extern void sh7377_pinmux_init(void);
+
+extern void sh7372_init_irq(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_pinmux_init(void);
+
+#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
new file mode 100644
index 0000000..a285d13
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr     \base, =INTFLGA
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqnr, [\base]
+	cmp	\irqnr, #0
+	beq	1000f
+	/* intevt to irq number */
+	lsr	\irqnr, \irqnr, #0x5
+	subs	\irqnr, \irqnr, #16
+
+1000:
+	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
new file mode 100644
index 0000000..5bc6bd4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#define ARCH_NR_GPIOS 1024
+#include <linux/sh_pfc.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
new file mode 100644
index 0000000..3f0ef19
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+/* INTFLGA register - used by low level interrupt code in entry-macro.S */
+#define INTFLGA			0xe6980018
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h
new file mode 100644
index 0000000..7339fe4
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/io.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
new file mode 100644
index 0000000..5179b72
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS         512
+#define NR_IRQS_LEGACY  8
+
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
new file mode 100644
index 0000000..e188183
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET	UL(CONFIG_MEMORY_START)
+#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h
new file mode 100644
index 0000000..52d0de6
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7367.h
@@ -0,0 +1,332 @@
+#ifndef __ASM_SH7367_H__
+#define __ASM_SH7367_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
+	GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
+	GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
+	GPIO_FN_PORT58_KEYIN6_PU,
+
+	/* 49-1 (FN) */
+	GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
+	GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
+	GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
+	GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
+	GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
+	GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+
+	/* 49-2 (FN) */
+	GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
+	GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
+	GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
+	GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
+	GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
+	GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
+	GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
+	GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
+	GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
+	GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
+	GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
+	GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
+	GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
+	GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
+	GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
+	GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
+	GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
+	GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
+	GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
+	GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
+	GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
+	GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
+	GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
+	GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
+	GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
+	GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
+	GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
+	GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
+	GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
+	GPIO_FN_NMI, GPIO_FN_TPU4TO0,
+	GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
+	GPIO_FN_IRQ_TMPB,
+	GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
+	GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
+
+	/* 49-3 (FN) */
+	GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
+	GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
+	GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
+	GPIO_FN_SCIFA5_RXD,
+	GPIO_FN_SCIFA5_TXD,
+	GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
+	GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
+	GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
+	GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
+	GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
+	GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
+	GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
+	GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
+	GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
+	GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
+	GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
+	GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
+	GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
+
+	/* 49-4 (FN) */
+	GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
+	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
+	GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
+	GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
+	GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
+	GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
+	GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
+	GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
+	GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
+	GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
+	GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
+	GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
+	GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
+	GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
+	GPIO_FN_LCDD6, GPIO_FN_DV_D6,
+	GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_DV_D7,
+	GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_D26, GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
+	GPIO_FN_D28, GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
+	GPIO_FN_D29, GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
+	GPIO_FN_D30, GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
+	GPIO_FN_D31, GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
+
+
+	/* 49-5 (FN) */
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
+	GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
+	GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
+	GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
+	GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
+	GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
+	GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
+	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
+	GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
+	GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
+	GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
+	GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
+	GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
+
+	/* 49-6 (FN) */
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
+	GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
+	GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
+	GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
+	GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
+	GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
+	GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
+	GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SDHICMD2,
+	GPIO_FN_RESETOUTS,
+	GPIO_FN_DIVLOCK,
+};
+
+#endif /* __ASM_SH7367_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
new file mode 100644
index 0000000..dc34f00
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH7372_H__
+#define __ASM_SH7372_H__
+
+/*
+ * Pin Function Controller:
+ *	GPIO_FN_xx - GPIO used to select pin function
+ *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* PORT */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+	GPIO_PORT190,
+
+	/* IRQ */
+	GPIO_FN_IRQ0_6,		/* PORT   6 */
+	GPIO_FN_IRQ0_162,	/* PORT 162 */
+	GPIO_FN_IRQ1,		/* PORT  12 */
+	GPIO_FN_IRQ2_4,		/* PORT   4 */
+	GPIO_FN_IRQ2_5,		/* PORT   5 */
+	GPIO_FN_IRQ3_8,		/* PORT   8 */
+	GPIO_FN_IRQ3_16,	/* PORT  16 */
+	GPIO_FN_IRQ4_17,	/* PORT  17 */
+	GPIO_FN_IRQ4_163,	/* PORT 163 */
+	GPIO_FN_IRQ5,		/* PORT  18 */
+	GPIO_FN_IRQ6_39,	/* PORT  39 */
+	GPIO_FN_IRQ6_164,	/* PORT 164 */
+	GPIO_FN_IRQ7_40,	/* PORT  40 */
+	GPIO_FN_IRQ7_167,	/* PORT 167 */
+	GPIO_FN_IRQ8_41,	/* PORT  41 */
+	GPIO_FN_IRQ8_168,	/* PORT 168 */
+	GPIO_FN_IRQ9_42,	/* PORT  42 */
+	GPIO_FN_IRQ9_169,	/* PORT 169 */
+	GPIO_FN_IRQ10,		/* PORT  65 */
+	GPIO_FN_IRQ11,		/* PORT  67 */
+	GPIO_FN_IRQ12_80,	/* PORT  80 */
+	GPIO_FN_IRQ12_137,	/* PORT 137 */
+	GPIO_FN_IRQ13_81,	/* PORT  81 */
+	GPIO_FN_IRQ13_145,	/* PORT 145 */
+	GPIO_FN_IRQ14_82,	/* PORT  82 */
+	GPIO_FN_IRQ14_146,	/* PORT 146 */
+	GPIO_FN_IRQ15_83,	/* PORT  83 */
+	GPIO_FN_IRQ15_147,	/* PORT 147 */
+	GPIO_FN_IRQ16_84,	/* PORT  84 */
+	GPIO_FN_IRQ16_170,	/* PORT 170 */
+	GPIO_FN_IRQ17,		/* PORT  85 */
+	GPIO_FN_IRQ18,		/* PORT  86 */
+	GPIO_FN_IRQ19,		/* PORT  87 */
+	GPIO_FN_IRQ20,		/* PORT  92 */
+	GPIO_FN_IRQ21,		/* PORT  93 */
+	GPIO_FN_IRQ22,		/* PORT  94 */
+	GPIO_FN_IRQ23,		/* PORT  95 */
+	GPIO_FN_IRQ24,		/* PORT 112 */
+	GPIO_FN_IRQ25,		/* PORT 119 */
+	GPIO_FN_IRQ26_121,	/* PORT 121 */
+	GPIO_FN_IRQ26_172,	/* PORT 172 */
+	GPIO_FN_IRQ27_122,	/* PORT 122 */
+	GPIO_FN_IRQ27_180,	/* PORT 180 */
+	GPIO_FN_IRQ28_123,	/* PORT 123 */
+	GPIO_FN_IRQ28_181,	/* PORT 181 */
+	GPIO_FN_IRQ29_129,	/* PORT 129 */
+	GPIO_FN_IRQ29_182,	/* PORT 182 */
+	GPIO_FN_IRQ30_130,	/* PORT 130 */
+	GPIO_FN_IRQ30_183,	/* PORT 183 */
+	GPIO_FN_IRQ31_138,	/* PORT 138 */
+	GPIO_FN_IRQ31_184,	/* PORT 184 */
+
+	/*
+	 * MSIOF0	(PORT 36, 37, 38, 39
+	 * 		      40, 41, 42, 43, 44, 45)
+	 */
+	GPIO_FN_MSIOF0_TSYNC,	GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_MSIOF0_MCK1,	GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_MSIOF0_SS2,	GPIO_FN_MSIOF0_TXD,
+
+	/*
+	 * MSIOF1	(PORT 39, 40, 41, 42, 43, 44
+	 * 		      84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
+	 */
+	GPIO_FN_MSIOF1_TSCK_39,	GPIO_FN_MSIOF1_TSYNC_40,
+	GPIO_FN_MSIOF1_TSCK_88,	GPIO_FN_MSIOF1_TSYNC_89,
+	GPIO_FN_MSIOF1_TXD_41,	GPIO_FN_MSIOF1_RXD_42,
+	GPIO_FN_MSIOF1_TXD_90,	GPIO_FN_MSIOF1_RXD_91,
+	GPIO_FN_MSIOF1_SS1_43,	GPIO_FN_MSIOF1_SS2_44,
+	GPIO_FN_MSIOF1_SS1_92,	GPIO_FN_MSIOF1_SS2_93,
+	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
+	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
+
+	/*
+	 * MSIOF2	(PORT 134, 135, 136, 137, 138, 139
+	 *		      148, 149, 150, 151)
+	 */
+	GPIO_FN_MSIOF2_RSCK,	GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_MSIOF2_SS1,	GPIO_FN_MSIOF2_SS2,
+	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_TSCK,
+	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TXD,
+
+	/* MSIOF3	(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_TXD,
+	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
+	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BB_RX_FLOW_N,
+
+	/* MSIOF4	(PORT 0, 1, 2, 3) */
+	GPIO_FN_BBIF2_TSCK1,	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_BBIF2_TXD1,	GPIO_FN_BBIF2_RXD,
+
+	/* FSI		(PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
+	GPIO_FN_FSIACK,		GPIO_FN_FSIBCK,
+	GPIO_FN_FSIAILR,	GPIO_FN_FSIAIBT,
+	GPIO_FN_FSIAISLD,	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
+	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIASPDIF_11,
+	GPIO_FN_FSIASPDIF_15,
+
+	/* FMSI		(PORT 12, 13, 14, 15, 16, 17, 18, 65) */
+	GPIO_FN_FMSOCK,		GPIO_FN_FMSOOLR,
+	GPIO_FN_FMSIOLR,	GPIO_FN_FMSOOBT,
+	GPIO_FN_FMSIOBT,	GPIO_FN_FMSOSLD,
+	GPIO_FN_FMSOILR,	GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT,	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD,	GPIO_FN_FMSICK,
+
+	/* SCIFA0	(PORT 152, 153, 156, 157, 158) */
+	GPIO_FN_SCIFA0_TXD,	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_SCIFA0_CTS,
+
+	/* SCIFA1	(PORT 154, 155, 159, 160, 161) */
+	GPIO_FN_SCIFA1_TXD,	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_SCK,	GPIO_FN_SCIFA1_RTS,
+	GPIO_FN_SCIFA1_CTS,
+
+	/* SCIFA2	(PORT 94, 95, 96, 97, 98) */
+	GPIO_FN_SCIFA2_CTS1,	GPIO_FN_SCIFA2_RTS1,
+	GPIO_FN_SCIFA2_TXD1,	GPIO_FN_SCIFA2_RXD1,
+	GPIO_FN_SCIFA2_SCK1,
+
+	/* SCIFA3	(PORT 43, 44,
+			     140, 141, 142, 143, 144) */
+	GPIO_FN_SCIFA3_CTS_43,	GPIO_FN_SCIFA3_CTS_140,
+	GPIO_FN_SCIFA3_RTS_44,	GPIO_FN_SCIFA3_RTS_141,
+	GPIO_FN_SCIFA3_SCK,	GPIO_FN_SCIFA3_TXD,
+	GPIO_FN_SCIFA3_RXD,
+
+	/* SCIFA4	(PORT 5, 6) */
+	GPIO_FN_SCIFA4_RXD,	GPIO_FN_SCIFA4_TXD,
+
+	/* SCIFA5	(PORT 8, 12) */
+	GPIO_FN_SCIFA5_RXD,	GPIO_FN_SCIFA5_TXD,
+
+	/* SCIFB	(PORT 162, 163, 164, 165, 166) */
+	GPIO_FN_SCIFB_SCK,	GPIO_FN_SCIFB_RTS,
+	GPIO_FN_SCIFB_CTS,	GPIO_FN_SCIFB_TXD,
+	GPIO_FN_SCIFB_RXD,
+
+	/*
+	 * CEU		(PORT 16, 17,
+	 *		      100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+	 *		      110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
+	 *		      120)
+	 */
+	GPIO_FN_VIO_HD,		GPIO_FN_VIO_CKO1,	GPIO_FN_VIO_CKO2,
+	GPIO_FN_VIO_VD,		GPIO_FN_VIO_CLK,	GPIO_FN_VIO_FIELD,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_VIO_D0,		GPIO_FN_VIO_D1,		GPIO_FN_VIO_D2,
+	GPIO_FN_VIO_D3,		GPIO_FN_VIO_D4,		GPIO_FN_VIO_D5,
+	GPIO_FN_VIO_D6,		GPIO_FN_VIO_D7,		GPIO_FN_VIO_D8,
+	GPIO_FN_VIO_D9,		GPIO_FN_VIO_D10,	GPIO_FN_VIO_D11,
+	GPIO_FN_VIO_D12,	GPIO_FN_VIO_D13,	GPIO_FN_VIO_D14,
+	GPIO_FN_VIO_D15,
+
+	/* USB0		(PORT 113, 114, 115, 116, 117, 167) */
+	GPIO_FN_IDIN_0,		GPIO_FN_EXTLP_0,
+	GPIO_FN_OVCN2_0,	GPIO_FN_PWEN_0,
+	GPIO_FN_OVCN_0,		GPIO_FN_VBUS0_0,
+
+	/* USB1		(PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
+	GPIO_FN_IDIN_1_18,	GPIO_FN_IDIN_1_113,
+	GPIO_FN_PWEN_1_115,	GPIO_FN_PWEN_1_138,
+	GPIO_FN_OVCN_1_114,	GPIO_FN_OVCN_1_162,
+	GPIO_FN_EXTLP_1,	GPIO_FN_OVCN2_1,
+	GPIO_FN_VBUS0_1,
+
+	/* GPIO		(PORT 41, 42, 43, 44) */
+	GPIO_FN_GPI0,	GPIO_FN_GPI1,	GPIO_FN_GPO0,	GPIO_FN_GPO1,
+
+	/*
+	 * BSC		(PORT 19,
+	 *		      20, 21, 22, 25, 26, 27, 28, 29,
+	 *		      30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+	 *		      40, 41, 42, 43, 44, 45,
+	 *		      62, 63, 64, 65, 66, 67,
+	 *		      71, 72, 74, 75)
+	 */
+	GPIO_FN_BS,	GPIO_FN_WE1,
+	GPIO_FN_CKO,	GPIO_FN_WAIT,	GPIO_FN_RDWR,
+
+	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
+	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
+	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
+	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
+	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
+	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
+	GPIO_FN_A26,
+
+	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
+	GPIO_FN_CS5A,	GPIO_FN_CS5B,	GPIO_FN_CS6A,
+
+	/*
+	 * BSC/FLCTL		(PORT 23, 24,
+	 *			      46, 47, 48, 49,
+	 *			      50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+	 *			      60, 61, 69, 70)
+	 */
+	GPIO_FN_RD_FSC,		GPIO_FN_WE0_FWE,
+	GPIO_FN_A4_FOE,		GPIO_FN_A5_FCDE,
+	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	GPIO_FN_D2_NAF2,
+	GPIO_FN_D3_NAF3,	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,
+	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	GPIO_FN_D8_NAF8,
+	GPIO_FN_D9_NAF9,	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,
+	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	GPIO_FN_D14_NAF14,
+	GPIO_FN_D15_NAF15,
+
+	/*
+	 * MMCIF(1)		(PORT 84, 85, 86, 87, 88, 89,
+	 *			      90, 91, 92, 99)
+	 */
+	GPIO_FN_MMCD0_0,	GPIO_FN_MMCD0_1,	GPIO_FN_MMCD0_2,
+	GPIO_FN_MMCD0_3,	GPIO_FN_MMCD0_4,	GPIO_FN_MMCD0_5,
+	GPIO_FN_MMCD0_6,	GPIO_FN_MMCD0_7,
+	GPIO_FN_MMCCMD0,	GPIO_FN_MMCCLK0,
+
+	/* MMCIF(2)		(PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
+	GPIO_FN_MMCD1_0,	GPIO_FN_MMCD1_1,	GPIO_FN_MMCD1_2,
+	GPIO_FN_MMCD1_3,	GPIO_FN_MMCD1_4,	GPIO_FN_MMCD1_5,
+	GPIO_FN_MMCD1_6,	GPIO_FN_MMCD1_7,
+	GPIO_FN_MMCCLK1,	GPIO_FN_MMCCMD1,
+
+	/* SPU2		(PORT 65) */
+	GPIO_FN_VINT_I,
+
+	/* FLCTL	(PORT 66, 68, 73) */
+	GPIO_FN_FCE1,	GPIO_FN_FCE0,	GPIO_FN_FRB,
+
+	/* HSI		(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+	GPIO_FN_GP_RX_FLAG,	GPIO_FN_GP_RX_DATA,	GPIO_FN_GP_TX_READY,
+	GPIO_FN_GP_RX_WAKE,	GPIO_FN_MP_TX_FLAG,	GPIO_FN_MP_TX_DATA,
+	GPIO_FN_MP_RX_READY,	GPIO_FN_MP_TX_WAKE,
+
+	/*
+	 * MFI		(PORT 76, 77, 78, 79,
+	 *		      80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+	 *		      90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
+	 */
+	GPIO_FN_MFIv6,	/* see MSEL4CR 6 */
+	GPIO_FN_MFIv4,	/* see MSEL4CR 6 */
+
+	GPIO_FN_MEMC_CS0,		GPIO_FN_MEMC_BUSCLK_MEMC_A0,
+	GPIO_FN_MEMC_CS1_MEMC_A1,	GPIO_FN_MEMC_ADV_MEMC_DREQ0,
+	GPIO_FN_MEMC_WAIT_MEMC_DREQ1,	GPIO_FN_MEMC_NOE,
+	GPIO_FN_MEMC_NWE,		GPIO_FN_MEMC_INT,
+
+	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
+	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
+	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
+	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
+	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
+	GPIO_FN_MEMC_AD15,
+
+	/* SIM		(PORT 94, 95, 98) */
+	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,	GPIO_FN_SIM_D,
+
+	/* TPU		(PORT 93, 99, 112, 160, 161) */
+	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
+	GPIO_FN_TPU0TO2_93,	GPIO_FN_TPU0TO2_99,
+	GPIO_FN_TPU0TO3,
+
+	/* I2C2		(PORT 110, 111) */
+	GPIO_FN_I2C_SCL2,	GPIO_FN_I2C_SDA2,
+
+	/* I2C3(1)	(PORT 114, 115) */
+	GPIO_FN_I2C_SCL3,	GPIO_FN_I2C_SDA3,
+
+	/* I2C3(2)	(PORT 137, 145) */
+	GPIO_FN_I2C_SCL3S,	GPIO_FN_I2C_SDA3S,
+
+	/* I2C4(2)	(PORT 116, 117) */
+	GPIO_FN_I2C_SCL4,	GPIO_FN_I2C_SDA4,
+
+	/* I2C4(2)	(PORT 146, 147) */
+	GPIO_FN_I2C_SCL4S,	GPIO_FN_I2C_SDA4S,
+
+	/*
+	 * KEYSC	(PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136)
+	 */
+	GPIO_FN_KEYOUT0,	GPIO_FN_KEYIN0_121,	GPIO_FN_KEYIN0_136,
+	GPIO_FN_KEYOUT1,	GPIO_FN_KEYIN1_122,	GPIO_FN_KEYIN1_135,
+	GPIO_FN_KEYOUT2,	GPIO_FN_KEYIN2_123,	GPIO_FN_KEYIN2_134,
+	GPIO_FN_KEYOUT3,	GPIO_FN_KEYIN3_124,	GPIO_FN_KEYIN3_133,
+	GPIO_FN_KEYOUT4,	GPIO_FN_KEYIN4,
+	GPIO_FN_KEYOUT5,	GPIO_FN_KEYIN5,
+	GPIO_FN_KEYOUT6,	GPIO_FN_KEYIN6,
+	GPIO_FN_KEYOUT7,	GPIO_FN_KEYIN7,
+
+	/*
+	 * LCDC		(PORT      121, 122, 123, 124, 125, 126, 127, 128, 129,
+	 *		      130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
+	 *		      140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
+	 *		      150, 151)
+	 */
+	GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
+	GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
+	GPIO_FN_LCDHSYN,	GPIO_FN_LCDCS,	GPIO_FN_LCDVSYN,
+	GPIO_FN_LCDDCK,		GPIO_FN_LCDWR,	GPIO_FN_LCDRD,
+	GPIO_FN_LCDDISP,	GPIO_FN_LCDRS,	GPIO_FN_LCDLCLK,
+	GPIO_FN_LCDDON,
+
+	GPIO_FN_LCDD0,	GPIO_FN_LCDD1,	GPIO_FN_LCDD2,	GPIO_FN_LCDD3,
+	GPIO_FN_LCDD4,	GPIO_FN_LCDD5,	GPIO_FN_LCDD6,	GPIO_FN_LCDD7,
+	GPIO_FN_LCDD8,	GPIO_FN_LCDD9,	GPIO_FN_LCDD10,	GPIO_FN_LCDD11,
+	GPIO_FN_LCDD12,	GPIO_FN_LCDD13,	GPIO_FN_LCDD14,	GPIO_FN_LCDD15,
+	GPIO_FN_LCDD16,	GPIO_FN_LCDD17,	GPIO_FN_LCDD18,	GPIO_FN_LCDD19,
+	GPIO_FN_LCDD20,	GPIO_FN_LCDD21,	GPIO_FN_LCDD22,	GPIO_FN_LCDD23,
+
+	/* IRDA		(PORT 139, 140, 141, 142) */
+	GPIO_FN_IRDA_OUT,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_FIRSEL,
+	GPIO_FN_IROUT_139,	GPIO_FN_IROUT_140,
+
+	/* TSIF1	(PORT 156, 157, 158, 159) */
+	GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
+	GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
+	GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
+	GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
+
+	GPIO_FN_TS_SPSYNC1,	GPIO_FN_TS_SDAT1,
+	GPIO_FN_TS_SDEN1,	GPIO_FN_TS_SCK1,
+
+	/* TSIF2	(PORT 137, 145, 146, 147) */
+	GPIO_FN_TS_SPSYNC2,	GPIO_FN_TS_SDAT2,
+	GPIO_FN_TS_SDEN2,	GPIO_FN_TS_SCK2,
+
+	/* HDMI		(PORT 169, 170) */
+	GPIO_FN_HDMI_HPD,	GPIO_FN_HDMI_CEC,
+
+	/* SDHI0	(PORT 171, 172, 173, 174, 175, 176, 177, 178) */
+	GPIO_FN_SDHICLK0,	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHICMD0,	GPIO_FN_SDHIWP0,
+	GPIO_FN_SDHID0_0,	GPIO_FN_SDHID0_1,
+	GPIO_FN_SDHID0_2,	GPIO_FN_SDHID0_3,
+
+	/* SDHI1	(PORT 179, 180, 181, 182, 183, 184) */
+	GPIO_FN_SDHICLK1,	GPIO_FN_SDHICMD1,	GPIO_FN_SDHID1_0,
+	GPIO_FN_SDHID1_1,	GPIO_FN_SDHID1_2,	GPIO_FN_SDHID1_3,
+
+	/* SDHI2	(PORT 185, 186, 187, 188, 189, 190) */
+	GPIO_FN_SDHICLK2,	GPIO_FN_SDHICMD2,	GPIO_FN_SDHID2_0,
+	GPIO_FN_SDHID2_1,	GPIO_FN_SDHID2_2,	GPIO_FN_SDHID2_3,
+
+	/* SDENC	see MSEL4CR 19 */
+	GPIO_FN_SDENC_CPG,
+	GPIO_FN_SDENC_DV_CLKI,
+};
+
+#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h
new file mode 100644
index 0000000..f580e22
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7377.h
@@ -0,0 +1,360 @@
+#ifndef __ASM_SH7377_H__
+#define __ASM_SH7377_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+	GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
+	GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
+	GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
+	GPIO_FN_PORT72_KEYIN6_PU,
+
+	/* 55-1 (FN) */
+	GPIO_FN_VBUS_0,
+	GPIO_FN_CPORT0,
+	GPIO_FN_CPORT1,
+	GPIO_FN_CPORT2,
+	GPIO_FN_CPORT3,
+	GPIO_FN_CPORT4,
+	GPIO_FN_CPORT5,
+	GPIO_FN_CPORT6,
+	GPIO_FN_CPORT7,
+	GPIO_FN_CPORT8,
+	GPIO_FN_CPORT9,
+	GPIO_FN_CPORT10,
+	GPIO_FN_CPORT11, GPIO_FN_SIN2,
+	GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+	GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
+	GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+	GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
+	GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
+	GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
+	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
+	GPIO_FN_CPORT19_MPORT1,
+	GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
+	GPIO_FN_CPORT21, GPIO_FN_STATUS0,
+	GPIO_FN_CPORT22, GPIO_FN_STATUS1,
+	GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+	GPIO_FN_B_SYNLD1,
+	GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
+	GPIO_FN_XMAINPS,
+	GPIO_FN_XDIVPS,
+	GPIO_FN_XIDRST,
+	GPIO_FN_IDCLK, GPIO_FN_IC_DP,
+	GPIO_FN_IDIO, GPIO_FN_IC_DM,
+	GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
+	GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+	GPIO_FN_PCMCLKO,
+	GPIO_FN_SYNC8KO,
+
+	/* 55-2 (FN) */
+	GPIO_FN_DNPCM_A,
+	GPIO_FN_UPPCM_A,
+	GPIO_FN_VACK,
+	GPIO_FN_XTALB1L,
+	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
+	GPIO_FN_GPS_IM,
+	GPIO_FN_GPS_IS,
+	GPIO_FN_GPS_QM,
+	GPIO_FN_GPS_QS,
+	GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
+	GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
+	GPIO_FN_FMSIOLR,
+	GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
+	GPIO_FN_FMSIOBT,
+	GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
+	GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
+	GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
+	GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
+	GPIO_FN_FMSIIBT,
+	GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
+	GPIO_FN_A0_EA0, GPIO_FN_BS,
+	GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
+	GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_TPU0TO1,
+	GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
+	GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
+	GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
+	GPIO_FN_D0_ED0_NAF0,
+	GPIO_FN_D1_ED1_NAF1,
+	GPIO_FN_D2_ED2_NAF2,
+	GPIO_FN_D3_ED3_NAF3,
+	GPIO_FN_D4_ED4_NAF4,
+	GPIO_FN_D5_ED5_NAF5,
+	GPIO_FN_D6_ED6_NAF6,
+	GPIO_FN_D7_ED7_NAF7,
+	GPIO_FN_D8_ED8_NAF8,
+	GPIO_FN_D9_ED9_NAF9,
+	GPIO_FN_D10_ED10_NAF10,
+	GPIO_FN_D11_ED11_NAF11,
+	GPIO_FN_D12_ED12_NAF12,
+	GPIO_FN_D13_ED13_NAF13,
+	GPIO_FN_D14_ED14_NAF14,
+	GPIO_FN_D15_ED15_NAF15,
+	GPIO_FN_CS4,
+	GPIO_FN_CS5A, GPIO_FN_FMSICK,
+	GPIO_FN_CS5B, GPIO_FN_FCE1,
+
+	/* 55-3 (FN) */
+	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
+	GPIO_FN_FCE0,
+	GPIO_FN_WAIT, GPIO_FN_DREQ0,
+	GPIO_FN_RD_XRD,
+	GPIO_FN_WE0_XWR0_FWE,
+	GPIO_FN_WE1_XWR1,
+	GPIO_FN_FRB,
+	GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT,
+	GPIO_FN_NBRST,
+	GPIO_FN_GPS_EPPSIN,
+	GPIO_FN_LATCHPULSE,
+	GPIO_FN_LTESIGNAL,
+	GPIO_FN_LEGACYSTATE,
+	GPIO_FN_TCKON,
+	GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
+	GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
+	GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
+	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
+	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
+	GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
+	GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
+	GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
+	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
+	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
+	GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
+	GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
+	GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
+	GPIO_FN_PORT140_FSIAOBT,
+	GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
+	GPIO_FN_PORT141_FSIAOSLD,
+	GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
+	GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
+	GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
+	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
+	GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
+	GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
+	GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
+	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
+	GPIO_FN_MFG0_IN2,
+	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
+	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
+
+	/* 55-4 (FN) */
+	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
+	GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
+	GPIO_FN_MFG3_IN2,
+	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
+	GPIO_FN_MFG3_IN1,
+	GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
+	GPIO_FN_MFG3_OUT1,
+	GPIO_FN_TPU3TO0,
+	GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
+	GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
+	GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
+	GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
+	GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
+	GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
+	GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
+	GPIO_FN_LCDD6, GPIO_FN_XWR2,
+	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+	GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
+	GPIO_FN_ED16,
+	GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
+	GPIO_FN_ED17,
+	GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
+	GPIO_FN_ED18,
+	GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
+	GPIO_FN_ED19,
+	GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
+	GPIO_FN_ED20,
+	GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
+	GPIO_FN_ED21,
+	GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
+	GPIO_FN_ED22,
+	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
+	GPIO_FN_VIO_DR7,
+	GPIO_FN_D23, GPIO_FN_ED23,
+	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
+	GPIO_FN_VIO_VDR,
+	GPIO_FN_D24, GPIO_FN_ED24,
+	GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
+	GPIO_FN_ED25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+	GPIO_FN_ED26,
+	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+	GPIO_FN_ED28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+	GPIO_FN_ED29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+	GPIO_FN_ED30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+	GPIO_FN_ED31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
+	GPIO_FN_VIO_CLKR,
+	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+	GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
+	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
+	GPIO_FN_MSIOF0L_TXD,
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
+	GPIO_FN_PORT226_VIO_CKO2,
+	GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
+	GPIO_FN_PORT233_FSIACK,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
+	GPIO_FN_PORT235_FSIAILR,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
+	GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+
+	/* 55-5 (FN) */
+	GPIO_FN_MSIOF1_SS2,
+	GPIO_FN_SCIFA6_TXD,
+	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
+	GPIO_FN_TPU4TO0,
+	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+	GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
+	GPIO_FN_PORT244_MSIOF2_RXD,
+	GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
+	GPIO_FN_PORT245_MSIOF2_TXD,
+	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
+	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
+	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
+	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
+	GPIO_FN_PORT248_MSIOF2_TSCK,
+	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
+	GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
+	GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
+	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
+	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+	GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
+	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
+	GPIO_FN_TMS3_SWDIO_MC1,
+	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
+	GPIO_FN_TDO3_SWO0_MC1,
+	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
+	GPIO_FN_RTCK3_SWO1_MC1,
+	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+	GPIO_FN_RESETOUTS,
+};
+
+#endif /* __ASM_SH7377_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
new file mode 100644
index 0000000..76a687e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
new file mode 100644
index 0000000..ae0d8d8
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_TIMEX_H
+#define __ASM_MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE		1193180 /* unused i8253 PIT value */
+
+#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
new file mode 100644
index 0000000..0bd7556
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_UNCOMPRESS_H
+#define __ASM_MACH_UNCOMPRESS_H
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
new file mode 100644
index 0000000..fb3c4f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_VMALLOC_H
+#define __ASM_MACH_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+
+#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
new file mode 100644
index 0000000..5ff70cad
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -0,0 +1,270 @@
+/*
+ * sh7367 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	DIRC,
+	CRYPT1_ERR, CRYPT2_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
+	ETM11_ACQCMP, ETM11_FULL,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	MSU_MSU, MSU_MSU2,
+	IREM,
+	SIU,
+	SPU,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINT1, PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	SDHI2,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
+	ETM11, ARM11, USBHS, FLCTL, IIC1
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT1_ERR, 0x05e0),
+	INTC_VECT(CRYPT2_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
+	INTC_VECT(ARM11_COMMRX, 0x0860),
+	INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IREM, 0x0f60),
+	INTC_VECT(SIU, 0x0fa0),
+	INTC_VECT(SPU, 0x0fc0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220),
+	INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
+	INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINT1, PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, ETM11_FULL, ETM11_ACQCMP } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBDMAC_USHDMI, SPU, SIU } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
+					      CMT1_CMT11, ARM11 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      0, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7367-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7367_init_irq(void)
+{
+	/* INTCA */
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
new file mode 100644
index 0000000..3ce9d9b
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -0,0 +1,369 @@
+/*
+ * sh7372 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBHSDMAC0_USHDMI,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	IRREM,
+	IRDA,
+	TPU0,
+	TTI20,
+	DDM,
+	SDHI2,
+	RWDT0,
+	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	HDMI,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI, FMSI,
+	MIPI_HSI,
+	IPMMU_IPMMUD,
+	CEC_1, CEC_2,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	MMC_MMC_ERR, MMC_MMC_NOR,
+	IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
+	USB0_USB0I1, USB0_USB0I0,
+	USB1_USB1I1, USB1_USB1I0,
+	USBHSDMAC1_USHDMI,
+
+	/* interrupt groups INTCA */
+	DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220),
+	INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260),
+	INTC_VECT(RWDT0, 0x1280),
+	INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
+	INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
+	INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC1_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(HDMI, 0x17e0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(MIPI_HSI, 0x18e0),
+	INTC_VECT(IPMMU_IPMMUD, 0x1920),
+	INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
+	INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
+	INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
+	INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
+	INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
+	INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
+	INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
+	INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
+		   DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+	INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
+		   DMAC1_2_DEI5, DMAC1_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
+	INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+		   AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { 0, CRYPT_STD, DIRC, 0,
+	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { 0, 0, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { 0, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, 0, 0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    0, 0, IRREM, 0 } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    0, CMT3, 0, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { 0, 0, 0, 0,
+	    0, 0, 0, HDMI } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    0, 0, 0, MIPI_HSI } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
+	  { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+	    IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
+	  { 0, 0, 0, 0,
+	    USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
+	  { USBHSDMAC1_USHDMI, 0, 0, 0,
+	    0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
+					      CMT1_CMT12, 0 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
+					      MFI_MFIM, 0 } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
+					      0/* MSU */, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+					      0/* MSUG */, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
+					       CEC_1, CEC_2 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+					       MMC_MMC_ERR, MMC_MMC_NOR } },
+	{ 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+					       IIC4_WAITI4, IIC4_DTEI4 } },
+	{ 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+					       IIC3_WAITI3, IIC3_DTEI3 } },
+	{ 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+					       0/*TXI*/, 0/*TEI*/} },
+	{ 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+					       USB1_USB1I1, USB1_USB1I0 } },
+	{ 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 32, 4, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 32, 4, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 32, 4, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 32, 4, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7372-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7372_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
new file mode 100644
index 0000000..5c781e2d1
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -0,0 +1,352 @@
+/*
+ * sh7377 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED_INTCA = 0,
+	ENABLED,
+	DISABLED,
+
+	/* interrupt sources INTCA */
+	IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+	IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+	IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+	IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+	DIRC,
+	_2DG,
+	CRYPT_STD,
+	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+	MFI_MFIM, MFI_MFIS,
+	BBIF1, BBIF2,
+	USBDMAC_USHDMI,
+	USBHS_USHI0, USBHS_USHI1,
+	_3DG_SGX540,
+	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+	KEYSC_KEY,
+	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+	MSIOF2, MSIOF1,
+	SCIFA4, SCIFA5, SCIFB,
+	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	SDHI0,
+	SDHI1,
+	MSU_MSU, MSU_MSU2,
+	IRREM,
+	MSUG,
+	IRDA,
+	TPU0, TPU1, TPU2, TPU3, TPU4,
+	LCRC,
+	PINTCA_PINT1, PINTCA_PINT2,
+	TTI20,
+	MISTY,
+	DDM,
+	RWDT0, RWDT1,
+	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+	ICUSB_ICUSB0, ICUSB_ICUSB1,
+	ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
+	SPU2_SPU0, SPU2_SPU1,
+	FSI,
+	FMSI,
+	SCUV,
+	IPMMU_IPMMUB,
+	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+	MFIS2,
+	CPORTR2S,
+	CMT14, CMT15,
+	SCIFA6,
+
+	/* interrupt groups INTCA */
+	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+	AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1,
+	ICUSB, ICUDMC
+};
+
+static struct intc_vect intca_vectors[] = {
+	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+	INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+	INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+	INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+	INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+	INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+	INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+	INTC_VECT(DIRC, 0x0560),
+	INTC_VECT(_2DG, 0x05e0),
+	INTC_VECT(CRYPT_STD, 0x0700),
+	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+	INTC_VECT(AP_ARM_COMMRX, 0x0860),
+	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+	INTC_VECT(_3DG_SGX540, 0x0a60),
+	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+	INTC_VECT(KEYSC_KEY, 0x0be0),
+	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+	INTC_VECT(SCIFB, 0x0d60),
+	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
+	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
+	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
+	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
+	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+	INTC_VECT(IRREM, 0x0f60),
+	INTC_VECT(MSUG, 0x0fa0),
+	INTC_VECT(IRDA, 0x0480),
+	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+	INTC_VECT(TPU4, 0x0520),
+	INTC_VECT(LCRC, 0x0540),
+	INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
+	INTC_VECT(TTI20, 0x1100),
+	INTC_VECT(MISTY, 0x1120),
+	INTC_VECT(DDM, 0x1140),
+	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+	INTC_VECT(DMAC_2_DADERR, 0x20c0),
+	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
+	INTC_VECT(SHWYSTAT_COM, 0x1340),
+	INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
+	INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
+	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+	INTC_VECT(FSI, 0x1840),
+	INTC_VECT(FMSI, 0x1860),
+	INTC_VECT(SCUV, 0x1880),
+	INTC_VECT(IPMMU_IPMMUB, 0x1900),
+	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+	INTC_VECT(MFIS2, 0x1a00),
+	INTC_VECT(CPORTR2S, 0x1a20),
+	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+	INTC_VECT(SCIFA6, 0x1a80),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+		   DMAC_2_DEI5, DMAC_2_DADERR),
+	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+		   DMAC2_2_DEI5, DMAC2_2_DADERR),
+	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+		   DMAC3_2_DEI5, DMAC3_2_DADERR),
+	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
+	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+	INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
+	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+	  { _2DG, CRYPT_STD, DIRC, 0,
+	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+	  { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
+	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+	  { DDM, 0, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+	    0, 0, MSIOF2, 0 } },
+	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
+	    TTI20, USBDMAC_USHDMI, 0, MSUG } },
+	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+	    CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
+	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+	    0, 0, 0, 0 } },
+	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+	    LCRC, MSU_MSU2, IRREM, MSU_MSU } },
+	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+	  { 0, 0, TPU0, TPU1,
+	    TPU2, TPU3, TPU4, 0 } },
+	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+	  { 0, 0, 0, 0,
+	    MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+	    0, 0, 0, 0 } },
+	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+	  { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
+	    ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
+	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	    SCUV, 0, 0, 0 } },
+	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+	  { IPMMU_IPMMUB, 0, 0, 0,
+	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+	  { MFIS2, CPORTR2S, CMT14, CMT15,
+	    SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900018, 0, 32, 4, /* INTPRI10A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690001c, 0, 32, 4, /* INTPRI30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
+					      CMT1_CMT11, AP_ARM1 } },
+	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
+					      CMT1_CMT12, TPU4 } },
+	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+					      MFI_MFIM, USBHS } },
+	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+					      _3DG_SGX540, CMT1_CMT10 } },
+	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+					      SCIFA2, SCIFA3 } },
+	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+					      FLCTL, SDHI0 } },
+	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
+	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
+	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+	{ 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
+	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
+	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
+	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
+	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+					       CMT14, CMT15 } },
+	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+	{ 0xe6900000, 16, 2, /* ICR1A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900004, 16, 2, /* ICR2A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900008, 16, 2, /* ICR3A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690000c, 16, 2, /* ICR4A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+	{ 0xe6900020, 0, 8, /* INTREQ00A */
+	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+	{ 0xe6900024, 0, 8, /* INTREQ10A */
+	  { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+	{ 0xe6900028, 0, 8, /* INTREQ20A */
+	  { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+	{ 0xe690002c, 0, 8, /* INTREQ30A */
+	  { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_desc intca_desc __initdata = {
+	.name = "sh7377-intca",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
+			   intca_mask_registers, intca_prio_registers,
+			   intca_sense_registers, intca_ack_registers),
+};
+
+void __init sh7377_init_irq(void)
+{
+	register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
new file mode 100644
index 0000000..128555e
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -0,0 +1,1801 @@
+/*
+ * sh7367 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _273(fn, pfx, sfx)		\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
+	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_273(str) _273(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+
+	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
+	PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
+	PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
+	PORT58_KEYIN6_PU_MARK,
+
+	/* 49-1 */
+	VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
+	CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
+	CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
+	RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
+	STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
+	XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
+	IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
+	M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+
+	/* 49-2 */
+	HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
+	HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
+	HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
+	HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
+	HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
+	HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
+	HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
+	HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
+	HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
+	HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
+	HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
+	HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
+	HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
+	HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
+	HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
+	HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
+	B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
+	HSU_SDI_MARK, PORT55_KEYIN3_MARK,
+	HSU_SCO_MARK, PORT56_KEYIN4_MARK,
+	HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
+	HSU_DACK_MARK, PORT58_KEYIN6_MARK,
+	HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
+	HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
+	PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC2_MARK, SCIFA0_SCK_MARK,
+	GPS_AGC3_MARK, SCIFA0_TXD_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRD_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
+	SIUBOMC_MARK, TPU2TO0_MARK,
+	SIUCKB_MARK, TPU2TO1_MARK,
+	SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
+	SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
+	SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
+	SIUBILR_MARK, TPU3TO1_MARK,
+	SIUBIBT_MARK, TPU3TO2_MARK,
+	SIUBISLD_MARK, TPU3TO3_MARK,
+	NMI_MARK, TPU4TO0_MARK,
+	DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
+	IRQ_TMPB_MARK,
+	PWEN_MARK, MFG1_OUT1_MARK,
+	OVCN_MARK, MFG1_IN1_MARK,
+	OVCN2_MARK, MFG1_IN2_MARK,
+
+	/* 49-3 */
+	RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
+	USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
+	SCIFA5_CTS_MARK, MFG0_IN1_MARK,
+	SCIFA5_RTS_MARK, MFG0_IN2_MARK,
+	SCIFA5_RXD_MARK,
+	SCIFA5_TXD_MARK,
+	SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A14_EA14_MARK, PORT102_KEYOUT0_MARK,
+	A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
+	A16_EA16_MARK, PORT104_KEYOUT2_MARK,
+	DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT105_KEYOUT3_MARK,
+	DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT106_KEYOUT4_MARK,
+	DV_DL0_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT107_KEYOUT5_MARK,
+	DV_DL1_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT108_KEYIN0_MARK,
+	DV_DL2_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT109_KEYIN1_MARK,
+	DV_DL3_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT110_KEYIN2_MARK,
+	DV_DL4_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT111_KEYIN3_MARK,
+	DV_DL5_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT112_KEYIN4_MARK,
+	DV_DL6_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT113_KEYIN5_MARK,
+	DV_DL7_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
+	D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
+	CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
+	CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
+	DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
+	A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
+	NBRSTOUT_MARK, NBRST_MARK,
+
+	/* 49-4 */
+	RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
+	VIO_VD_MARK, VIO_HD_MARK,
+	VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
+	VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
+	VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
+	VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+	VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
+	VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
+	VIO_CKO_MARK,
+	MFG3_IN1_MARK, MFG3_IN2_MARK,
+	M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
+	M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
+	M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
+	M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
+	LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
+	SIUCKA_MARK, MFG0_OUT2_MARK,
+	LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
+	SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
+	SIUAOBT_MARK, BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
+	SIUAOSLD_MARK, BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
+	SIUAISPD_MARK, MFG1_OUT2_MARK,
+	LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
+	SIUAILR_MARK, MFG2_OUT2_MARK,
+	LCDD6_MARK, DV_D6_MARK,
+	SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
+	LCDD7_MARK, DV_D7_MARK,
+	SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
+	D26_MARK, ED26_MARK,
+	LCDD19_MARK, MSIOF0L_TSYNC_MARK,
+	D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
+	D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
+	D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
+	D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
+	D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
+
+	/* 49-5 */
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
+	LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
+	VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
+	VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
+	VIO_VDR_MARK, VIO_HDR_MARK,
+	VIO_CLKR_MARK, VIO_CKOR_MARK,
+	SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
+	SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
+	SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
+	SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
+	MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
+	MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
+	MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
+	MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
+	MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
+	MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+	MSIOF1_SS2_MARK,
+	PORT236_IROUT_MARK, IRDA_OUT_MARK,
+	IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+	TPU1TO0_MARK, TS_SPSYNC3_MARK,
+	TPU1TO1_MARK, TS_SDAT3_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
+	TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
+	M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
+	M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
+	PORT245_IROUT_MARK, M15_RSW_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	SDHICLK0_MARK, TCK2_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_MARK,
+	SDHID0_1_MARK, TDO2_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_MARK,
+
+	/* 49-6 */
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK,
+	TS_SPSYNC2_MARK, TMS3_MARK,
+	SDHID1_1_MARK, M9_SLCD_AO2_MARK,
+	TS_SDAT2_MARK, TDO3_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK,
+	TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK,
+	TS_SCK2_MARK, RTCK3_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	SDHICLK2_MARK, SCIFB_SCK_MARK,
+	SDHID2_0_MARK, SCIFB_TXD_MARK,
+	SDHID2_1_MARK, SCIFB_CTS_MARK,
+	SDHID2_2_MARK, SCIFB_RXD_MARK,
+	SDHID2_3_MARK, SCIFB_RTS_MARK,
+	SDHICMD2_MARK,
+	RESETOUTS_MARK,
+	DIVLOCK_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* 49-1 (GPIO) */
+	PORT_DATA_I_PD(0),
+	PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
+	PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
+	PORT_DATA_I_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
+	PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
+	PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
+	PORT_DATA_IO_PU(33),
+	PORT_DATA_O(34),
+	PORT_DATA_I_PU(35),
+	PORT_DATA_O(36),
+	PORT_DATA_I_PU_PD(37),
+
+	/* 49-2 (GPIO) */
+	PORT_DATA_IO_PU_PD(38),
+	PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
+	PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
+	PORT_DATA_O(46), PORT_DATA_O(47),
+	PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
+	PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
+	PORT_DATA_O(53),
+	PORT_DATA_IO_PD(54),
+	PORT_DATA_I_PU_PD(55),
+	PORT_DATA_IO_PU_PD(56),
+	PORT_DATA_I_PU_PD(57),
+	PORT_DATA_IO_PU_PD(58),
+	PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
+	PORT_DATA_O(63),
+	PORT_DATA_I_PU(64),
+	PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
+	PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
+	PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
+	PORT_DATA_I_PD(74),
+	PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
+	PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
+	PORT_DATA_O(79),
+	PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
+	PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
+	PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
+	PORT_DATA_I_PD(87),
+	PORT_DATA_IO_PU_PD(88),
+	PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
+
+	/* 49-3 (GPIO) */
+	PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
+	PORT_DATA_IO_PU_PD(99),	PORT_DATA_IO_PU_PD(100),
+	PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
+	PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
+	PORT_DATA_IO_PD(107),
+	PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
+	PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
+	PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
+	PORT_DATA_IO_PU_PD(114),
+	PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
+	PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
+	PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
+	PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
+	PORT_DATA_IO_PU(130),
+	PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
+	PORT_DATA_IO_PU(134),
+	PORT_DATA_O(135), PORT_DATA_O(136),
+	PORT_DATA_I_PU_PD(137),
+	PORT_DATA_IO(138),
+	PORT_DATA_IO_PU_PD(139),
+	PORT_DATA_IO(140), PORT_DATA_IO(141),
+	PORT_DATA_I_PU(142),
+	PORT_DATA_O(143), PORT_DATA_O(144),
+	PORT_DATA_I_PU(145),
+
+	/* 49-4 (GPIO) */
+	PORT_DATA_O(146),
+	PORT_DATA_I_PU_PD(147),
+	PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
+	PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
+	PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
+	PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
+	PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
+	PORT_DATA_IO_PU_PD(167),
+	PORT_DATA_O(168),
+	PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
+	PORT_DATA_O(171),
+	PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+	PORT_DATA_O(174),
+	PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
+	PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
+	PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
+	PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
+	PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+	PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
+	PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
+	PORT_DATA_O(199),
+	PORT_DATA_IO_PD(200),
+
+	/* 49-5 (GPIO) */
+	PORT_DATA_O(201),
+	PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
+	PORT_DATA_I(204),
+	PORT_DATA_O(205),
+	PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
+	PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
+	PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
+	PORT_DATA_O(217),
+	PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
+	PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
+	PORT_DATA_I_PD(223),
+	PORT_DATA_I_PU_PD(224),
+	PORT_DATA_O(225),
+	PORT_DATA_IO_PD(226),
+	PORT_DATA_IO_PU_PD(227),
+	PORT_DATA_I_PD(228),
+	PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
+	PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
+	PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_I_PU_PD(235),
+	PORT_DATA_O(236),
+	PORT_DATA_I_PD(237),
+	PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
+	PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
+	PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
+	PORT_DATA_O(244),
+	PORT_DATA_IO_PU_PD(245),
+	PORT_DATA_O(246),
+	PORT_DATA_I_PD(247),
+	PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_I_PU_PD(249),
+	PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
+	PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
+	PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
+	PORT_DATA_IO_PU_PD(256),
+
+	/* 49-6 (GPIO) */
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
+	PORT_DATA_IO_PD(259),
+	PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
+	PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
+	PORT_DATA_O(265),
+	PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
+	PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
+	PORT_DATA_O(271),
+	PORT_DATA_I_PD(272),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT48_FN2, PORT48_IN_PU),
+	PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT49_FN2, PORT49_IN_PU),
+	PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT50_FN2, PORT50_IN_PU),
+	PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT55_FN2, PORT55_IN_PU),
+	PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT56_FN2, PORT56_IN_PU),
+	PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT57_FN2, PORT57_IN_PU),
+	PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
+		    PORT58_FN2, PORT58_IN_PU),
+
+	/* 49-1 (FN) */
+	PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
+	PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
+	PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
+	PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
+	PINMUX_DATA(IDIO_MARK, PORT33_FN1),
+	PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT35_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
+
+	/* 49-2 (FN) */
+	PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
+	PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
+	PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
+	PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
+	PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
+	PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
+	PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
+	PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
+	PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
+	PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
+	PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
+	PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
+	PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
+	PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
+	PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
+	PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
+	PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
+	PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
+	PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
+	PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
+	PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
+	PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
+	PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
+	PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
+	PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
+	PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
+	PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
+	PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
+	PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
+	PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
+	PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
+	PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
+	PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
+	PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
+	PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
+	PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
+	PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
+	PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
+	PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
+	PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
+	PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
+	PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
+	PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
+	PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
+	PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
+	PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
+	PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
+	PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
+	PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
+	PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
+	PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
+	PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
+	PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
+	PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
+	PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
+	PINMUX_DATA(NMI_MARK, PORT83_FN1),
+	PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
+	PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
+	PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
+	PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
+	PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
+	PINMUX_DATA(PWEN_MARK, PORT88_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
+	PINMUX_DATA(OVCN_MARK, PORT89_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
+	PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
+
+	/* 49-3 (FN) */
+	PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
+	PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
+	PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
+	PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
+	PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
+	PINMUX_DATA(IDIN_MARK, PORT95_FN1),
+	PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
+	PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
+	PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
+	PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
+	PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
+	PINMUX_DATA(BS_MARK, PORT101_FN2),
+	PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
+	PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
+	PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
+	PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
+	PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
+	PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
+	PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
+	PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
+	PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
+	PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
+	PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
+	PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
+	PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
+	PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
+	PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
+	PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
+	PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
+	PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
+	PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
+	PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
+	PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
+	PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
+	PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
+	PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
+	PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
+	PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
+	PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
+	PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
+	PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
+	PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
+	PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
+	PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
+	PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
+	PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
+	PINMUX_DATA(A26_MARK, PORT114_FN1),
+	PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
+	PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
+	PINMUX_DATA(CS4_MARK, PORT131_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT132_FN1),
+	PINMUX_DATA(CS5B_MARK, PORT133_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT133_FN2),
+	PINMUX_DATA(CS6B_MARK, PORT134_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT134_FN2),
+	PINMUX_DATA(FCE0_MARK, PORT135_FN1),
+	PINMUX_DATA(CS6A_MARK, PORT136_FN1),
+	PINMUX_DATA(DACK0_MARK, PORT136_FN2),
+	PINMUX_DATA(WAIT_MARK, PORT137_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
+	PINMUX_DATA(A27_MARK, PORT139_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
+	PINMUX_DATA(FRB_MARK, PORT142_FN1),
+	PINMUX_DATA(CKO_MARK, PORT143_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT145_FN1),
+
+	/* 49-4 (FN) */
+	PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
+	PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
+	PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
+	PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
+	PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
+	PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
+	PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
+	PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
+	PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
+	PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
+	PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
+	PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
+	PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
+	PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
+	PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
+	PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
+	PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
+	PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
+	PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
+	PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
+	PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
+	PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
+	PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
+	PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
+	PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
+	PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
+	PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
+	PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
+	PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
+	PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
+	PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
+	PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
+	PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
+	PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
+	PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
+	PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
+	PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
+	PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
+	PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
+	PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
+	PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
+	PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
+	PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
+	PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
+	PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
+	PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
+	PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
+	PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
+	PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
+	PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
+	PINMUX_DATA(XWR2_MARK, PORT181_FN7),
+	PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
+	PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
+	PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
+	PINMUX_DATA(XWR3_MARK, PORT182_FN7),
+	PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
+	PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
+	PINMUX_DATA(D16_MARK, PORT183_FN6),
+	PINMUX_DATA(ED16_MARK, PORT183_FN7),
+	PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
+	PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
+	PINMUX_DATA(D17_MARK, PORT184_FN6),
+	PINMUX_DATA(ED17_MARK, PORT184_FN7),
+	PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
+	PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
+	PINMUX_DATA(D18_MARK, PORT185_FN6),
+	PINMUX_DATA(ED18_MARK, PORT185_FN7),
+	PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
+	PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
+	PINMUX_DATA(D19_MARK, PORT186_FN6),
+	PINMUX_DATA(ED19_MARK, PORT186_FN7),
+	PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
+	PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
+	PINMUX_DATA(D20_MARK, PORT187_FN6),
+	PINMUX_DATA(ED20_MARK, PORT187_FN7),
+	PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
+	PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
+	PINMUX_DATA(D21_MARK, PORT188_FN6),
+	PINMUX_DATA(ED21_MARK, PORT188_FN7),
+	PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
+	PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
+	PINMUX_DATA(D22_MARK, PORT189_FN6),
+	PINMUX_DATA(ED22_MARK, PORT189_FN7),
+	PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
+	PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
+	PINMUX_DATA(D23_MARK, PORT190_FN6),
+	PINMUX_DATA(ED23_MARK, PORT190_FN7),
+	PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
+	PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
+	PINMUX_DATA(D24_MARK, PORT191_FN6),
+	PINMUX_DATA(ED24_MARK, PORT191_FN7),
+	PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
+	PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
+	PINMUX_DATA(D25_MARK, PORT192_FN6),
+	PINMUX_DATA(ED25_MARK, PORT192_FN7),
+	PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
+	PINMUX_DATA(D26_MARK, PORT193_FN6),
+	PINMUX_DATA(ED26_MARK, PORT193_FN7),
+	PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
+	PINMUX_DATA(D27_MARK, PORT194_FN6),
+	PINMUX_DATA(ED27_MARK, PORT194_FN7),
+	PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
+	PINMUX_DATA(D28_MARK, PORT195_FN6),
+	PINMUX_DATA(ED28_MARK, PORT195_FN7),
+	PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
+	PINMUX_DATA(D29_MARK, PORT196_FN6),
+	PINMUX_DATA(ED29_MARK, PORT196_FN7),
+	PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
+	PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
+	PINMUX_DATA(D30_MARK, PORT197_FN6),
+	PINMUX_DATA(ED30_MARK, PORT197_FN7),
+	PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
+	PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
+	PINMUX_DATA(D31_MARK, PORT198_FN6),
+	PINMUX_DATA(ED31_MARK, PORT198_FN7),
+	PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
+	PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
+	PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT200_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
+
+	/* 49-5 (FN) */
+	PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
+	PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
+	PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
+	PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
+	PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT205_FN3),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
+	PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
+	PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
+	PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
+	PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
+	PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
+	PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
+	PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
+	PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
+	PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
+	PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
+	PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
+	PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
+	PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
+	PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
+	PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
+	PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
+	PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
+	PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
+	PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
+	PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
+	PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
+	PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
+	PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
+	PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
+	PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
+	PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
+	PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
+	PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
+	PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
+	PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
+	PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
+	PINMUX_DATA(SIN3_MARK, PORT247_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
+	PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
+	PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
+	PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
+	PINMUX_DATA(DINT_MARK, PORT250_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
+	PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
+	PINMUX_DATA(TCK2_MARK, PORT251_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
+	PINMUX_DATA(TMS2_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
+	PINMUX_DATA(TDO2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
+	PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
+
+	/* 49-6 (FN) */
+	PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
+	PINMUX_DATA(TCK3_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
+	PINMUX_DATA(TMS3_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
+	PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDO3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
+	PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT264_FN4),
+	PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
+	PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
+	PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
+	PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
+	PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
+	PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
+	PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
+	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 49-1 -> 49-6 (GPIO) */
+	GPIO_PORT_273(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
+	GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
+	GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
+	GPIO_FN(PORT58_KEYIN6_PU),
+
+	/* 49-1 (FN) */
+	GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
+	GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
+	GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
+	GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
+	GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
+	GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+
+	/* 49-2 (FN) */
+	GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
+	GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
+	GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
+	GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
+	GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
+	GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
+	GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
+	GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
+	GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
+	GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
+	GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
+	GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
+	GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
+	GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
+	GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
+	GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
+	GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
+	GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
+	GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
+	GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
+	GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
+	GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
+	GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
+	GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
+	GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
+	GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
+	GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
+	GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
+	GPIO_FN(NMI), GPIO_FN(TPU4TO0),
+	GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
+	GPIO_FN(IRQ_TMPB),
+	GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
+	GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
+
+	/* 49-3 (FN) */
+	GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
+	GPIO_FN(PORT93_VIO_CKO2),
+	GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
+	GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
+	GPIO_FN(SCIFA5_RXD),
+	GPIO_FN(SCIFA5_TXD),
+	GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
+	GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
+	GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
+	GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
+	GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
+	GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
+	GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
+	GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
+	GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
+	GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
+	GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
+	GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
+	GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
+
+	/* 49-4 (FN) */
+	GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
+	GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
+	GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
+	GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
+	GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
+	GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
+	GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
+	GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),
+	GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
+	GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
+	GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
+	GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
+	GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
+	GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
+	GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
+	GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
+	GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
+	GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
+	GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
+	GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6), GPIO_FN(DV_D6),
+	GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
+	GPIO_FN(LCDD7), GPIO_FN(DV_D7),
+	GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
+	GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
+	GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
+	GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
+	GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
+	GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
+	GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
+	GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
+	GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
+	GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
+	GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(D26), GPIO_FN(ED26),
+	GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(D27), GPIO_FN(ED27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28), GPIO_FN(ED28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29), GPIO_FN(ED29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
+	GPIO_FN(D30), GPIO_FN(ED30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
+	GPIO_FN(D31), GPIO_FN(ED31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
+
+	/* 49-5 (FN) */
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
+	GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
+	GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
+	GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
+	GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
+	GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
+	GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
+	GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
+	GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
+	GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
+	GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
+	GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
+
+	/* 49-6 (FN) */
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
+	GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
+	GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
+	GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
+	GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
+	GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
+	GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
+	GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
+	GPIO_FN(SDHICMD2),
+	GPIO_FN(RESETOUTS),
+	GPIO_FN(DIVLOCK),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6051058), /* PORT88CR */
+	PORTCR(89, 0xe6051059), /* PORT89CR */
+
+	PORTCR(90, 0xe605105a), /* PORT90CR */
+	PORTCR(91, 0xe605105b), /* PORT91CR */
+	PORTCR(92, 0xe605105c), /* PORT92CR */
+	PORTCR(93, 0xe605105d), /* PORT93CR */
+	PORTCR(94, 0xe605105e), /* PORT94CR */
+	PORTCR(95, 0xe605105f), /* PORT95CR */
+	PORTCR(96, 0xe6051060), /* PORT96CR */
+	PORTCR(97, 0xe6051061), /* PORT97CR */
+	PORTCR(98, 0xe6051062), /* PORT98CR */
+	PORTCR(99, 0xe6051063), /* PORT99CR */
+
+	PORTCR(100, 0xe6051064), /* PORT100CR */
+	PORTCR(101, 0xe6051065), /* PORT101CR */
+	PORTCR(102, 0xe6051066), /* PORT102CR */
+	PORTCR(103, 0xe6051067), /* PORT103CR */
+	PORTCR(104, 0xe6051068), /* PORT104CR */
+	PORTCR(105, 0xe6051069), /* PORT105CR */
+	PORTCR(106, 0xe605106a), /* PORT106CR */
+	PORTCR(107, 0xe605106b), /* PORT107CR */
+	PORTCR(108, 0xe605106c), /* PORT108CR */
+	PORTCR(109, 0xe605106d), /* PORT109CR */
+
+	PORTCR(110, 0xe605106e), /* PORT110CR */
+	PORTCR(111, 0xe605106f), /* PORT111CR */
+	PORTCR(112, 0xe6051070), /* PORT112CR */
+	PORTCR(113, 0xe6051071), /* PORT113CR */
+	PORTCR(114, 0xe6051072), /* PORT114CR */
+	PORTCR(115, 0xe6051073), /* PORT115CR */
+	PORTCR(116, 0xe6051074), /* PORT116CR */
+	PORTCR(117, 0xe6051075), /* PORT117CR */
+	PORTCR(118, 0xe6051076), /* PORT118CR */
+	PORTCR(119, 0xe6051077), /* PORT119CR */
+
+	PORTCR(120, 0xe6051078), /* PORT120CR */
+	PORTCR(121, 0xe6051079), /* PORT121CR */
+	PORTCR(122, 0xe605107a), /* PORT122CR */
+	PORTCR(123, 0xe605107b), /* PORT123CR */
+	PORTCR(124, 0xe605107c), /* PORT124CR */
+	PORTCR(125, 0xe605107d), /* PORT125CR */
+	PORTCR(126, 0xe605107e), /* PORT126CR */
+	PORTCR(127, 0xe605107f), /* PORT127CR */
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+	PORTCR(165, 0xe60510a5), /* PORT165CR */
+	PORTCR(166, 0xe60510a6), /* PORT166CR */
+	PORTCR(167, 0xe60510a7), /* PORT167CR */
+	PORTCR(168, 0xe60510a8), /* PORT168CR */
+	PORTCR(169, 0xe60510a9), /* PORT169CR */
+
+	PORTCR(170, 0xe60510aa), /* PORT170CR */
+	PORTCR(171, 0xe60510ab), /* PORT171CR */
+	PORTCR(172, 0xe60510ac), /* PORT172CR */
+	PORTCR(173, 0xe60510ad), /* PORT173CR */
+	PORTCR(174, 0xe60510ae), /* PORT174CR */
+	PORTCR(175, 0xe60520af), /* PORT175CR */
+	PORTCR(176, 0xe60520b0), /* PORT176CR */
+	PORTCR(177, 0xe60520b1), /* PORT177CR */
+	PORTCR(178, 0xe60520b2), /* PORT178CR */
+	PORTCR(179, 0xe60520b3), /* PORT179CR */
+
+	PORTCR(180, 0xe60520b4), /* PORT180CR */
+	PORTCR(181, 0xe60520b5), /* PORT181CR */
+	PORTCR(182, 0xe60520b6), /* PORT182CR */
+	PORTCR(183, 0xe60520b7), /* PORT183CR */
+	PORTCR(184, 0xe60520b8), /* PORT184CR */
+	PORTCR(185, 0xe60520b9), /* PORT185CR */
+	PORTCR(186, 0xe60520ba), /* PORT186CR */
+	PORTCR(187, 0xe60520bb), /* PORT187CR */
+	PORTCR(188, 0xe60520bc), /* PORT188CR */
+	PORTCR(189, 0xe60520bd), /* PORT189CR */
+
+	PORTCR(190, 0xe60520be), /* PORT190CR */
+	PORTCR(191, 0xe60520bf), /* PORT191CR */
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60530ec), /* PORT236CR */
+	PORTCR(237, 0xe60530ed), /* PORT237CR */
+	PORTCR(238, 0xe60530ee), /* PORT238CR */
+	PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60530f0), /* PORT240CR */
+	PORTCR(241, 0xe60530f1), /* PORT241CR */
+	PORTCR(242, 0xe60530f2), /* PORT242CR */
+	PORTCR(243, 0xe60530f3), /* PORT243CR */
+	PORTCR(244, 0xe60530f4), /* PORT244CR */
+	PORTCR(245, 0xe60530f5), /* PORT245CR */
+	PORTCR(246, 0xe60530f6), /* PORT246CR */
+	PORTCR(247, 0xe60530f7), /* PORT247CR */
+	PORTCR(248, 0xe60530f8), /* PORT248CR */
+	PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60530fa), /* PORT250CR */
+	PORTCR(251, 0xe60530fb), /* PORT251CR */
+	PORTCR(252, 0xe60530fc), /* PORT252CR */
+	PORTCR(253, 0xe60530fd), /* PORT253CR */
+	PORTCR(254, 0xe60530fe), /* PORT254CR */
+	PORTCR(255, 0xe60530ff), /* PORT255CR */
+	PORTCR(256, 0xe6053100), /* PORT256CR */
+	PORTCR(257, 0xe6053101), /* PORT257CR */
+	PORTCR(258, 0xe6053102), /* PORT258CR */
+	PORTCR(259, 0xe6053103), /* PORT259CR */
+
+	PORTCR(260, 0xe6053104), /* PORT260CR */
+	PORTCR(261, 0xe6053105), /* PORT261CR */
+	PORTCR(262, 0xe6053106), /* PORT262CR */
+	PORTCR(263, 0xe6053107), /* PORT263CR */
+	PORTCR(264, 0xe6053108), /* PORT264CR */
+	PORTCR(265, 0xe6053109), /* PORT265CR */
+	PORTCR(266, 0xe605310a), /* PORT266CR */
+	PORTCR(267, 0xe605310b), /* PORT267CR */
+	PORTCR(268, 0xe605310c), /* PORT268CR */
+	PORTCR(269, 0xe605310d), /* PORT269CR */
+
+	PORTCR(270, 0xe605310e), /* PORT270CR */
+	PORTCR(271, 0xe605310f), /* PORT271CR */
+	PORTCR(272, 0xe6053110), /* PORT272CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
+		0, 0,
+		0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+		PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+		PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+		PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+		PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+		PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+		PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+		PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+		PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+		PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+		PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+		PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+		PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+		PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+		PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+		PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+		PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+		PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+		PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+		PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+		PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+		PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+		PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+		PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+		PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
+		PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+		PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+		PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+		PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+		PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+		PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+		PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+		PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
+		PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+		PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+		PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+		PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+		PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+		PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+		PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+		PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
+		PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+		PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+		PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+		PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+		PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+		PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+		PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+		PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
+		PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+		PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+		PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+		PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+		PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+		PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+		PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+		PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+		PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+		PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+		PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+		PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+		PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+		PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+		PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+		PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, PORT272_DATA,
+		PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+		PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+		PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+		PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7367_pinmux_info = {
+	.name = "sh7367_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_DIVLOCK,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7367_pinmux_init(void)
+{
+	register_pinmux(&sh7367_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
new file mode 100644
index 0000000..9557d09
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -0,0 +1,1637 @@
+/*
+ * sh7372 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on
+ * sh7367 processor support - PFC hardware block
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7372.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _80(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
+
+#define _190(fn, pfx, sfx) \
+	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
+	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_ALL(str) _190(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	/* PORT0_DATA -> PORT190_DATA */
+	PINMUX_DATA_BEGIN,
+	PORT_ALL(DATA),
+	PINMUX_DATA_END,
+
+	/* PORT0_IN -> PORT190_IN */
+	PINMUX_INPUT_BEGIN,
+	PORT_ALL(IN),
+	PINMUX_INPUT_END,
+
+	/* PORT0_IN_PU -> PORT190_IN_PU */
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_ALL(IN_PU),
+	PINMUX_INPUT_PULLUP_END,
+
+	/* PORT0_IN_PD -> PORT190_IN_PD */
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_ALL(IN_PD),
+	PINMUX_INPUT_PULLDOWN_END,
+
+	/* PORT0_OUT -> PORT190_OUT */
+	PINMUX_OUTPUT_BEGIN,
+	PORT_ALL(OUT),
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_ALL(FN_IN),	/* PORT0_FN_IN	-> PORT190_FN_IN */
+	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT	-> PORT190_FN_OUT */
+	PORT_ALL(FN0),		/* PORT0_FN0	-> PORT190_FN0 */
+	PORT_ALL(FN1),		/* PORT0_FN1	-> PORT190_FN1 */
+	PORT_ALL(FN2),		/* PORT0_FN2	-> PORT190_FN2 */
+	PORT_ALL(FN3),		/* PORT0_FN3	-> PORT190_FN3 */
+	PORT_ALL(FN4),		/* PORT0_FN4	-> PORT190_FN4 */
+	PORT_ALL(FN5),		/* PORT0_FN5	-> PORT190_FN5 */
+	PORT_ALL(FN6),		/* PORT0_FN6	-> PORT190_FN6 */
+	PORT_ALL(FN7),		/* PORT0_FN7	-> PORT190_FN7 */
+
+	MSEL1CR_31_0,	MSEL1CR_31_1,
+	MSEL1CR_30_0,	MSEL1CR_30_1,
+	MSEL1CR_29_0,	MSEL1CR_29_1,
+	MSEL1CR_28_0,	MSEL1CR_28_1,
+	MSEL1CR_27_0,	MSEL1CR_27_1,
+	MSEL1CR_26_0,	MSEL1CR_26_1,
+	MSEL1CR_16_0,	MSEL1CR_16_1,
+	MSEL1CR_15_0,	MSEL1CR_15_1,
+	MSEL1CR_14_0,	MSEL1CR_14_1,
+	MSEL1CR_13_0,	MSEL1CR_13_1,
+	MSEL1CR_12_0,	MSEL1CR_12_1,
+	MSEL1CR_9_0,	MSEL1CR_9_1,
+	MSEL1CR_8_0,	MSEL1CR_8_1,
+	MSEL1CR_7_0,	MSEL1CR_7_1,
+	MSEL1CR_6_0,	MSEL1CR_6_1,
+	MSEL1CR_4_0,	MSEL1CR_4_1,
+	MSEL1CR_3_0,	MSEL1CR_3_1,
+	MSEL1CR_2_0,	MSEL1CR_2_1,
+	MSEL1CR_0_0,	MSEL1CR_0_1,
+
+	MSEL3CR_27_0,	MSEL3CR_27_1,
+	MSEL3CR_26_0,	MSEL3CR_26_1,
+	MSEL3CR_21_0,	MSEL3CR_21_1,
+	MSEL3CR_20_0,	MSEL3CR_20_1,
+	MSEL3CR_15_0,	MSEL3CR_15_1,
+	MSEL3CR_9_0,	MSEL3CR_9_1,
+	MSEL3CR_6_0,	MSEL3CR_6_1,
+
+	MSEL4CR_19_0,	MSEL4CR_19_1,
+	MSEL4CR_18_0,	MSEL4CR_18_1,
+	MSEL4CR_17_0,	MSEL4CR_17_1,
+	MSEL4CR_16_0,	MSEL4CR_16_1,
+	MSEL4CR_15_0,	MSEL4CR_15_1,
+	MSEL4CR_14_0,	MSEL4CR_14_1,
+	MSEL4CR_10_0,	MSEL4CR_10_1,
+	MSEL4CR_6_0,	MSEL4CR_6_1,
+	MSEL4CR_4_0,	MSEL4CR_4_1,
+	MSEL4CR_1_0,	MSEL4CR_1_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+
+	/* IRQ */
+	IRQ0_6_MARK,	IRQ0_162_MARK,	IRQ1_MARK,	IRQ2_4_MARK,
+	IRQ2_5_MARK,	IRQ3_8_MARK,	IRQ3_16_MARK,	IRQ4_17_MARK,
+	IRQ4_163_MARK,	IRQ5_MARK,	IRQ6_39_MARK,	IRQ6_164_MARK,
+	IRQ7_40_MARK,	IRQ7_167_MARK,	IRQ8_41_MARK,	IRQ8_168_MARK,
+	IRQ9_42_MARK,	IRQ9_169_MARK,	IRQ10_MARK,	IRQ11_MARK,
+	IRQ12_80_MARK,	IRQ12_137_MARK,	IRQ13_81_MARK,	IRQ13_145_MARK,
+	IRQ14_82_MARK,	IRQ14_146_MARK,	IRQ15_83_MARK,	IRQ15_147_MARK,
+	IRQ16_84_MARK,	IRQ16_170_MARK,	IRQ17_MARK,	IRQ18_MARK,
+	IRQ19_MARK,	IRQ20_MARK,	IRQ21_MARK,	IRQ22_MARK,
+	IRQ23_MARK,	IRQ24_MARK,	IRQ25_MARK,	IRQ26_121_MARK,
+	IRQ26_172_MARK,	IRQ27_122_MARK,	IRQ27_180_MARK,	IRQ28_123_MARK,
+	IRQ28_181_MARK,	IRQ29_129_MARK,	IRQ29_182_MARK,	IRQ30_130_MARK,
+	IRQ30_183_MARK,	IRQ31_138_MARK,	IRQ31_184_MARK,
+
+	/* MSIOF0 */
+	MSIOF0_TSYNC_MARK,	MSIOF0_TSCK_MARK,	MSIOF0_RXD_MARK,
+	MSIOF0_RSCK_MARK,	MSIOF0_RSYNC_MARK,	MSIOF0_MCK0_MARK,
+	MSIOF0_MCK1_MARK,	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,
+	MSIOF0_TXD_MARK,
+
+	/* MSIOF1 */
+	MSIOF1_TSCK_39_MARK,	MSIOF1_TSYNC_40_MARK,
+	MSIOF1_TSCK_88_MARK,	MSIOF1_TSYNC_89_MARK,
+	MSIOF1_TXD_41_MARK,	MSIOF1_RXD_42_MARK,
+	MSIOF1_TXD_90_MARK,	MSIOF1_RXD_91_MARK,
+	MSIOF1_SS1_43_MARK,	MSIOF1_SS2_44_MARK,
+	MSIOF1_SS1_92_MARK,	MSIOF1_SS2_93_MARK,
+	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
+	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
+
+	/* MSIOF2 */
+	MSIOF2_RSCK_MARK,	MSIOF2_RSYNC_MARK,	MSIOF2_MCK0_MARK,
+	MSIOF2_MCK1_MARK,	MSIOF2_SS1_MARK,	MSIOF2_SS2_MARK,
+	MSIOF2_TSYNC_MARK,	MSIOF2_TSCK_MARK,	MSIOF2_RXD_MARK,
+	MSIOF2_TXD_MARK,
+
+	/* MSIOF3 */
+	BBIF1_RXD_MARK,		BBIF1_TSYNC_MARK,	BBIF1_TSCK_MARK,
+	BBIF1_TXD_MARK,		BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
+	BBIF1_FLOW_MARK,	BB_RX_FLOW_N_MARK,
+
+	/* MSIOF4 */
+	BBIF2_TSCK1_MARK,	BBIF2_TSYNC1_MARK,
+	BBIF2_TXD1_MARK,	BBIF2_RXD_MARK,
+
+	/* FSI */
+	FSIACK_MARK,	FSIBCK_MARK,		FSIAILR_MARK,	FSIAIBT_MARK,
+	FSIAISLD_MARK,	FSIAOMC_MARK,		FSIAOLR_MARK,	FSIAOBT_MARK,
+	FSIAOSLD_MARK,	FSIASPDIF_11_MARK,	FSIASPDIF_15_MARK,
+
+	/* FMSI */
+	FMSOCK_MARK,	FMSOOLR_MARK,	FMSIOLR_MARK,	FMSOOBT_MARK,
+	FMSIOBT_MARK,	FMSOSLD_MARK,	FMSOILR_MARK,	FMSIILR_MARK,
+	FMSOIBT_MARK,	FMSIIBT_MARK,	FMSISLD_MARK,	FMSICK_MARK,
+
+	/* SCIFA0 */
+	SCIFA0_TXD_MARK,	SCIFA0_RXD_MARK,	SCIFA0_SCK_MARK,
+	SCIFA0_RTS_MARK,	SCIFA0_CTS_MARK,
+
+	/* SCIFA1 */
+	SCIFA1_TXD_MARK,	SCIFA1_RXD_MARK,	SCIFA1_SCK_MARK,
+	SCIFA1_RTS_MARK,	SCIFA1_CTS_MARK,
+
+	/* SCIFA2 */
+	SCIFA2_CTS1_MARK,	SCIFA2_RTS1_MARK,	SCIFA2_TXD1_MARK,
+	SCIFA2_RXD1_MARK,	SCIFA2_SCK1_MARK,
+
+	/* SCIFA3 */
+	SCIFA3_CTS_43_MARK,	SCIFA3_CTS_140_MARK,	SCIFA3_RTS_44_MARK,
+	SCIFA3_RTS_141_MARK,	SCIFA3_SCK_MARK,	SCIFA3_TXD_MARK,
+	SCIFA3_RXD_MARK,
+
+	/* SCIFA4 */
+	SCIFA4_RXD_MARK,	SCIFA4_TXD_MARK,
+
+	/* SCIFA5 */
+	SCIFA5_RXD_MARK,	SCIFA5_TXD_MARK,
+
+	/* SCIFB */
+	SCIFB_SCK_MARK,	SCIFB_RTS_MARK,	SCIFB_CTS_MARK,
+	SCIFB_TXD_MARK,	SCIFB_RXD_MARK,
+
+	/* CEU */
+	VIO_HD_MARK,	VIO_CKO1_MARK,	VIO_CKO2_MARK,	VIO_VD_MARK,
+	VIO_CLK_MARK,	VIO_FIELD_MARK,	VIO_CKO_MARK,
+	VIO_D0_MARK,	VIO_D1_MARK,	VIO_D2_MARK,	VIO_D3_MARK,
+	VIO_D4_MARK,	VIO_D5_MARK,	VIO_D6_MARK,	VIO_D7_MARK,
+	VIO_D8_MARK,	VIO_D9_MARK,	VIO_D10_MARK,	VIO_D11_MARK,
+	VIO_D12_MARK,	VIO_D13_MARK,	VIO_D14_MARK,	VIO_D15_MARK,
+
+	/* USB0 */
+	IDIN_0_MARK,	EXTLP_0_MARK,	OVCN2_0_MARK,	PWEN_0_MARK,
+	OVCN_0_MARK,	VBUS0_0_MARK,
+
+	/* USB1 */
+	IDIN_1_18_MARK,		IDIN_1_113_MARK,
+	PWEN_1_115_MARK,	PWEN_1_138_MARK,
+	OVCN_1_114_MARK,	OVCN_1_162_MARK,
+	EXTLP_1_MARK,		OVCN2_1_MARK,
+	VBUS0_1_MARK,
+
+	/* GPIO */
+	GPI0_MARK,	GPI1_MARK,	GPO0_MARK,	GPO1_MARK,
+
+	/* BSC */
+	BS_MARK,	WE1_MARK,
+	CKO_MARK,	WAIT_MARK,	RDWR_MARK,
+
+	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
+	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
+	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
+	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
+	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
+	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
+	A26_MARK,
+
+	CS0_MARK,	CS2_MARK,	CS4_MARK,
+	CS5A_MARK,	CS5B_MARK,	CS6A_MARK,
+
+	/* BSC/FLCTL */
+	RD_FSC_MARK,	WE0_FWE_MARK,	A4_FOE_MARK,	A5_FCDE_MARK,
+	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	D3_NAF3_MARK,
+	D4_NAF4_MARK,	D5_NAF5_MARK,	D6_NAF6_MARK,	D7_NAF7_MARK,
+	D8_NAF8_MARK,	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,
+	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	D15_NAF15_MARK,
+
+	/* MMCIF(1) */
+	MMCD0_0_MARK,	MMCD0_1_MARK,	MMCD0_2_MARK,	MMCD0_3_MARK,
+	MMCD0_4_MARK,	MMCD0_5_MARK,	MMCD0_6_MARK,	MMCD0_7_MARK,
+	MMCCMD0_MARK,	MMCCLK0_MARK,
+
+	/* MMCIF(2) */
+	MMCD1_0_MARK,	MMCD1_1_MARK,	MMCD1_2_MARK,	MMCD1_3_MARK,
+	MMCD1_4_MARK,	MMCD1_5_MARK,	MMCD1_6_MARK,	MMCD1_7_MARK,
+	MMCCLK1_MARK,	MMCCMD1_MARK,
+
+	/* SPU2 */
+	VINT_I_MARK,
+
+	/* FLCTL */
+	FCE1_MARK,	FCE0_MARK,	FRB_MARK,
+
+	/* HSI */
+	GP_RX_FLAG_MARK,	GP_RX_DATA_MARK,	GP_TX_READY_MARK,
+	GP_RX_WAKE_MARK,	MP_TX_FLAG_MARK,	MP_TX_DATA_MARK,
+	MP_RX_READY_MARK,	MP_TX_WAKE_MARK,
+
+	/* MFI */
+	MFIv6_MARK,
+	MFIv4_MARK,
+
+	MEMC_CS0_MARK,			MEMC_BUSCLK_MEMC_A0_MARK,
+	MEMC_CS1_MEMC_A1_MARK,		MEMC_ADV_MEMC_DREQ0_MARK,
+	MEMC_WAIT_MEMC_DREQ1_MARK,	MEMC_NOE_MARK,
+	MEMC_NWE_MARK,			MEMC_INT_MARK,
+
+	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,
+	MEMC_AD3_MARK,	MEMC_AD4_MARK,	MEMC_AD5_MARK,
+	MEMC_AD6_MARK,	MEMC_AD7_MARK,	MEMC_AD8_MARK,
+	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
+	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,
+	MEMC_AD15_MARK,
+
+	/* SIM */
+	SIM_RST_MARK,	SIM_CLK_MARK,	SIM_D_MARK,
+
+	/* TPU */
+	TPU0TO0_MARK,		TPU0TO1_MARK,
+	TPU0TO2_93_MARK,	TPU0TO2_99_MARK,
+	TPU0TO3_MARK,
+
+	/* I2C2 */
+	I2C_SCL2_MARK,	I2C_SDA2_MARK,
+
+	/* I2C3(1) */
+	I2C_SCL3_MARK,	I2C_SDA3_MARK,
+
+	/* I2C3(2) */
+	I2C_SCL3S_MARK,	I2C_SDA3S_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4_MARK,	I2C_SDA4_MARK,
+
+	/* I2C4(2) */
+	I2C_SCL4S_MARK,	I2C_SDA4S_MARK,
+
+	/* KEYSC */
+	KEYOUT0_MARK,	KEYIN0_121_MARK,	KEYIN0_136_MARK,
+	KEYOUT1_MARK,	KEYIN1_122_MARK,	KEYIN1_135_MARK,
+	KEYOUT2_MARK,	KEYIN2_123_MARK,	KEYIN2_134_MARK,
+	KEYOUT3_MARK,	KEYIN3_124_MARK,	KEYIN3_133_MARK,
+	KEYOUT4_MARK,	KEYIN4_MARK,
+	KEYOUT5_MARK,	KEYIN5_MARK,
+	KEYOUT6_MARK,	KEYIN6_MARK,
+	KEYOUT7_MARK,	KEYIN7_MARK,
+
+	/* LCDC */
+	LCDC0_SELECT_MARK,
+	LCDC1_SELECT_MARK,
+	LCDHSYN_MARK,	LCDCS_MARK,	LCDVSYN_MARK,	LCDDCK_MARK,
+	LCDWR_MARK,	LCDRD_MARK,	LCDDISP_MARK,	LCDRS_MARK,
+	LCDLCLK_MARK,	LCDDON_MARK,
+
+	LCDD0_MARK,	LCDD1_MARK,	LCDD2_MARK,	LCDD3_MARK,
+	LCDD4_MARK,	LCDD5_MARK,	LCDD6_MARK,	LCDD7_MARK,
+	LCDD8_MARK,	LCDD9_MARK,	LCDD10_MARK,	LCDD11_MARK,
+	LCDD12_MARK,	LCDD13_MARK,	LCDD14_MARK,	LCDD15_MARK,
+	LCDD16_MARK,	LCDD17_MARK,	LCDD18_MARK,	LCDD19_MARK,
+	LCDD20_MARK,	LCDD21_MARK,	LCDD22_MARK,	LCDD23_MARK,
+
+	/* IRDA */
+	IRDA_OUT_MARK,	IRDA_IN_MARK,	IRDA_FIRSEL_MARK,
+	IROUT_139_MARK,	IROUT_140_MARK,
+
+	/* TSIF1 */
+	TS0_1SELECT_MARK,
+	TS0_2SELECT_MARK,
+	TS1_1SELECT_MARK,
+	TS1_2SELECT_MARK,
+
+	TS_SPSYNC1_MARK,	TS_SDAT1_MARK,
+	TS_SDEN1_MARK,		TS_SCK1_MARK,
+
+	/* TSIF2 */
+	TS_SPSYNC2_MARK,	TS_SDAT2_MARK,
+	TS_SDEN2_MARK,		TS_SCK2_MARK,
+
+	/* HDMI */
+	HDMI_HPD_MARK,	HDMI_CEC_MARK,
+
+	/* SDHI0 */
+	SDHICLK0_MARK,	SDHICD0_MARK,
+	SDHICMD0_MARK,	SDHIWP0_MARK,
+	SDHID0_0_MARK,	SDHID0_1_MARK,
+	SDHID0_2_MARK,	SDHID0_3_MARK,
+
+	/* SDHI1 */
+	SDHICLK1_MARK,	SDHICMD1_MARK,	SDHID1_0_MARK,
+	SDHID1_1_MARK,	SDHID1_2_MARK,	SDHID1_3_MARK,
+
+	/* SDHI2 */
+	SDHICLK2_MARK,	SDHICMD2_MARK,	SDHID2_0_MARK,
+	SDHID2_1_MARK,	SDHID2_2_MARK,	SDHID2_3_MARK,
+
+	/* SDENC */
+	SDENC_CPG_MARK,
+	SDENC_DV_CLKI_MARK,
+
+	PINMUX_MARK_END,
+};
+
+/* PORT_DATA_I_PD(nr) */
+#define _I___D(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_I_PU(nr) */
+#define _I__U_(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_I_PU_PD(nr) */
+#define _I__UD(nr)			     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* PORT_DATA_O(nr) */
+#define __O___(nr)							\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+/* PORT_DATA_IO(nr) */
+#define _IO___(nr)				     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN)
+
+/* PORT_DATA_IO_PD(nr) */
+#define _IO__D(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_IO_PU(nr) */
+#define _IO_U_(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_IO_PU_PD(nr) */
+#define _IO_UD(nr)					     \
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+	/* specify valid pin states for each pin in GPIO mode */
+
+	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
+	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+
+	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
+	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+
+	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
+	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+
+	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
+	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+
+	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
+	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+
+	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
+	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+
+	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
+	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+
+	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
+	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+
+	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
+	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+
+	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
+	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+
+	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
+	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+
+	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
+	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+
+	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
+	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+
+	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
+	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+
+	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
+	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+
+	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
+	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+
+	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
+	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+
+	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
+	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+
+	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
+	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
+
+	_IO_UD(190),
+
+	/* IRQ */
+	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
+	PINMUX_DATA(IRQ0_162_MARK,	PORT162_FN0,	MSEL1CR_0_1),
+	PINMUX_DATA(IRQ1_MARK,		PORT12_FN0),
+	PINMUX_DATA(IRQ2_4_MARK,	PORT4_FN0,	MSEL1CR_2_0),
+	PINMUX_DATA(IRQ2_5_MARK,	PORT5_FN0,	MSEL1CR_2_1),
+	PINMUX_DATA(IRQ3_8_MARK,	PORT8_FN0,	MSEL1CR_3_0),
+	PINMUX_DATA(IRQ3_16_MARK,	PORT16_FN0,	MSEL1CR_3_1),
+	PINMUX_DATA(IRQ4_17_MARK,	PORT17_FN0,	MSEL1CR_4_0),
+	PINMUX_DATA(IRQ4_163_MARK,	PORT163_FN0,	MSEL1CR_4_1),
+	PINMUX_DATA(IRQ5_MARK,		PORT18_FN0),
+	PINMUX_DATA(IRQ6_39_MARK,	PORT39_FN0,	MSEL1CR_6_0),
+	PINMUX_DATA(IRQ6_164_MARK,	PORT164_FN0,	MSEL1CR_6_1),
+	PINMUX_DATA(IRQ7_40_MARK,	PORT40_FN0,	MSEL1CR_7_1),
+	PINMUX_DATA(IRQ7_167_MARK,	PORT167_FN0,	MSEL1CR_7_0),
+	PINMUX_DATA(IRQ8_41_MARK,	PORT41_FN0,	MSEL1CR_8_1),
+	PINMUX_DATA(IRQ8_168_MARK,	PORT168_FN0,	MSEL1CR_8_0),
+	PINMUX_DATA(IRQ9_42_MARK,	PORT42_FN0,	MSEL1CR_9_0),
+	PINMUX_DATA(IRQ9_169_MARK,	PORT169_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ10_MARK,		PORT65_FN0,	MSEL1CR_9_1),
+	PINMUX_DATA(IRQ11_MARK,		PORT67_FN0),
+	PINMUX_DATA(IRQ12_80_MARK,	PORT80_FN0,	MSEL1CR_12_0),
+	PINMUX_DATA(IRQ12_137_MARK,	PORT137_FN0,	MSEL1CR_12_1),
+	PINMUX_DATA(IRQ13_81_MARK,	PORT81_FN0,	MSEL1CR_13_0),
+	PINMUX_DATA(IRQ13_145_MARK,	PORT145_FN0,	MSEL1CR_13_1),
+	PINMUX_DATA(IRQ14_82_MARK,	PORT82_FN0,	MSEL1CR_14_0),
+	PINMUX_DATA(IRQ14_146_MARK,	PORT146_FN0,	MSEL1CR_14_1),
+	PINMUX_DATA(IRQ15_83_MARK,	PORT83_FN0,	MSEL1CR_15_0),
+	PINMUX_DATA(IRQ15_147_MARK,	PORT147_FN0,	MSEL1CR_15_1),
+	PINMUX_DATA(IRQ16_84_MARK,	PORT84_FN0,	MSEL1CR_16_0),
+	PINMUX_DATA(IRQ16_170_MARK,	PORT170_FN0,	MSEL1CR_16_1),
+	PINMUX_DATA(IRQ17_MARK,		PORT85_FN0),
+	PINMUX_DATA(IRQ18_MARK,		PORT86_FN0),
+	PINMUX_DATA(IRQ19_MARK,		PORT87_FN0),
+	PINMUX_DATA(IRQ20_MARK,		PORT92_FN0),
+	PINMUX_DATA(IRQ21_MARK,		PORT93_FN0),
+	PINMUX_DATA(IRQ22_MARK,		PORT94_FN0),
+	PINMUX_DATA(IRQ23_MARK,		PORT95_FN0),
+	PINMUX_DATA(IRQ24_MARK,		PORT112_FN0),
+	PINMUX_DATA(IRQ25_MARK,		PORT119_FN0),
+	PINMUX_DATA(IRQ26_121_MARK,	PORT121_FN0,	MSEL1CR_26_1),
+	PINMUX_DATA(IRQ26_172_MARK,	PORT172_FN0,	MSEL1CR_26_0),
+	PINMUX_DATA(IRQ27_122_MARK,	PORT122_FN0,	MSEL1CR_27_1),
+	PINMUX_DATA(IRQ27_180_MARK,	PORT180_FN0,	MSEL1CR_27_0),
+	PINMUX_DATA(IRQ28_123_MARK,	PORT123_FN0,	MSEL1CR_28_1),
+	PINMUX_DATA(IRQ28_181_MARK,	PORT181_FN0,	MSEL1CR_28_0),
+	PINMUX_DATA(IRQ29_129_MARK,	PORT129_FN0,	MSEL1CR_29_1),
+	PINMUX_DATA(IRQ29_182_MARK,	PORT182_FN0,	MSEL1CR_29_0),
+	PINMUX_DATA(IRQ30_130_MARK,	PORT130_FN0,	MSEL1CR_30_1),
+	PINMUX_DATA(IRQ30_183_MARK,	PORT183_FN0,	MSEL1CR_30_0),
+	PINMUX_DATA(IRQ31_138_MARK,	PORT138_FN0,	MSEL1CR_31_1),
+	PINMUX_DATA(IRQ31_184_MARK,	PORT184_FN0,	MSEL1CR_31_0),
+
+	/* Function 1 */
+	PINMUX_DATA(BBIF2_TSCK1_MARK,		PORT0_FN1),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK,		PORT1_FN1),
+	PINMUX_DATA(BBIF2_TXD1_MARK,		PORT2_FN1),
+	PINMUX_DATA(BBIF2_RXD_MARK,		PORT3_FN1),
+	PINMUX_DATA(FSIACK_MARK,		PORT4_FN1),
+	PINMUX_DATA(FSIAILR_MARK,		PORT5_FN1),
+	PINMUX_DATA(FSIAIBT_MARK,		PORT6_FN1),
+	PINMUX_DATA(FSIAISLD_MARK,		PORT7_FN1),
+	PINMUX_DATA(FSIAOMC_MARK,		PORT8_FN1),
+	PINMUX_DATA(FSIAOLR_MARK,		PORT9_FN1),
+	PINMUX_DATA(FSIAOBT_MARK,		PORT10_FN1),
+	PINMUX_DATA(FSIAOSLD_MARK,		PORT11_FN1),
+	PINMUX_DATA(FMSOCK_MARK,		PORT12_FN1),
+	PINMUX_DATA(FMSOOLR_MARK,		PORT13_FN1),
+	PINMUX_DATA(FMSOOBT_MARK,		PORT14_FN1),
+	PINMUX_DATA(FMSOSLD_MARK,		PORT15_FN1),
+	PINMUX_DATA(FMSOILR_MARK,		PORT16_FN1),
+	PINMUX_DATA(FMSOIBT_MARK,		PORT17_FN1),
+	PINMUX_DATA(FMSISLD_MARK,		PORT18_FN1),
+	PINMUX_DATA(A0_MARK,			PORT19_FN1),
+	PINMUX_DATA(A1_MARK,			PORT20_FN1),
+	PINMUX_DATA(A2_MARK,			PORT21_FN1),
+	PINMUX_DATA(A3_MARK,			PORT22_FN1),
+	PINMUX_DATA(A4_FOE_MARK,		PORT23_FN1),
+	PINMUX_DATA(A5_FCDE_MARK,		PORT24_FN1),
+	PINMUX_DATA(A6_MARK,			PORT25_FN1),
+	PINMUX_DATA(A7_MARK,			PORT26_FN1),
+	PINMUX_DATA(A8_MARK,			PORT27_FN1),
+	PINMUX_DATA(A9_MARK,			PORT28_FN1),
+	PINMUX_DATA(A10_MARK,			PORT29_FN1),
+	PINMUX_DATA(A11_MARK,			PORT30_FN1),
+	PINMUX_DATA(A12_MARK,			PORT31_FN1),
+	PINMUX_DATA(A13_MARK,			PORT32_FN1),
+	PINMUX_DATA(A14_MARK,			PORT33_FN1),
+	PINMUX_DATA(A15_MARK,			PORT34_FN1),
+	PINMUX_DATA(A16_MARK,			PORT35_FN1),
+	PINMUX_DATA(A17_MARK,			PORT36_FN1),
+	PINMUX_DATA(A18_MARK,			PORT37_FN1),
+	PINMUX_DATA(A19_MARK,			PORT38_FN1),
+	PINMUX_DATA(A20_MARK,			PORT39_FN1),
+	PINMUX_DATA(A21_MARK,			PORT40_FN1),
+	PINMUX_DATA(A22_MARK,			PORT41_FN1),
+	PINMUX_DATA(A23_MARK,			PORT42_FN1),
+	PINMUX_DATA(A24_MARK,			PORT43_FN1),
+	PINMUX_DATA(A25_MARK,			PORT44_FN1),
+	PINMUX_DATA(A26_MARK,			PORT45_FN1),
+	PINMUX_DATA(D0_NAF0_MARK,		PORT46_FN1),
+	PINMUX_DATA(D1_NAF1_MARK,		PORT47_FN1),
+	PINMUX_DATA(D2_NAF2_MARK,		PORT48_FN1),
+	PINMUX_DATA(D3_NAF3_MARK,		PORT49_FN1),
+	PINMUX_DATA(D4_NAF4_MARK,		PORT50_FN1),
+	PINMUX_DATA(D5_NAF5_MARK,		PORT51_FN1),
+	PINMUX_DATA(D6_NAF6_MARK,		PORT52_FN1),
+	PINMUX_DATA(D7_NAF7_MARK,		PORT53_FN1),
+	PINMUX_DATA(D8_NAF8_MARK,		PORT54_FN1),
+	PINMUX_DATA(D9_NAF9_MARK,		PORT55_FN1),
+	PINMUX_DATA(D10_NAF10_MARK,		PORT56_FN1),
+	PINMUX_DATA(D11_NAF11_MARK,		PORT57_FN1),
+	PINMUX_DATA(D12_NAF12_MARK,		PORT58_FN1),
+	PINMUX_DATA(D13_NAF13_MARK,		PORT59_FN1),
+	PINMUX_DATA(D14_NAF14_MARK,		PORT60_FN1),
+	PINMUX_DATA(D15_NAF15_MARK,		PORT61_FN1),
+	PINMUX_DATA(CS0_MARK,			PORT62_FN1),
+	PINMUX_DATA(CS2_MARK,			PORT63_FN1),
+	PINMUX_DATA(CS4_MARK,			PORT64_FN1),
+	PINMUX_DATA(CS5A_MARK,			PORT65_FN1),
+	PINMUX_DATA(CS5B_MARK,			PORT66_FN1),
+	PINMUX_DATA(CS6A_MARK,			PORT67_FN1),
+	PINMUX_DATA(FCE0_MARK,			PORT68_FN1),
+	PINMUX_DATA(RD_FSC_MARK,		PORT69_FN1),
+	PINMUX_DATA(WE0_FWE_MARK,		PORT70_FN1),
+	PINMUX_DATA(WE1_MARK,			PORT71_FN1),
+	PINMUX_DATA(CKO_MARK,			PORT72_FN1),
+	PINMUX_DATA(FRB_MARK,			PORT73_FN1),
+	PINMUX_DATA(WAIT_MARK,			PORT74_FN1),
+	PINMUX_DATA(RDWR_MARK,			PORT75_FN1),
+	PINMUX_DATA(MEMC_AD0_MARK,		PORT76_FN1),
+	PINMUX_DATA(MEMC_AD1_MARK,		PORT77_FN1),
+	PINMUX_DATA(MEMC_AD2_MARK,		PORT78_FN1),
+	PINMUX_DATA(MEMC_AD3_MARK,		PORT79_FN1),
+	PINMUX_DATA(MEMC_AD4_MARK,		PORT80_FN1),
+	PINMUX_DATA(MEMC_AD5_MARK,		PORT81_FN1),
+	PINMUX_DATA(MEMC_AD6_MARK,		PORT82_FN1),
+	PINMUX_DATA(MEMC_AD7_MARK,		PORT83_FN1),
+	PINMUX_DATA(MEMC_AD8_MARK,		PORT84_FN1),
+	PINMUX_DATA(MEMC_AD9_MARK,		PORT85_FN1),
+	PINMUX_DATA(MEMC_AD10_MARK,		PORT86_FN1),
+	PINMUX_DATA(MEMC_AD11_MARK,		PORT87_FN1),
+	PINMUX_DATA(MEMC_AD12_MARK,		PORT88_FN1),
+	PINMUX_DATA(MEMC_AD13_MARK,		PORT89_FN1),
+	PINMUX_DATA(MEMC_AD14_MARK,		PORT90_FN1),
+	PINMUX_DATA(MEMC_AD15_MARK,		PORT91_FN1),
+	PINMUX_DATA(MEMC_CS0_MARK,		PORT92_FN1),
+	PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK,	PORT93_FN1),
+	PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK,	PORT94_FN1),
+	PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK,	PORT95_FN1),
+	PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK,	PORT96_FN1),
+	PINMUX_DATA(MEMC_NOE_MARK,		PORT97_FN1),
+	PINMUX_DATA(MEMC_NWE_MARK,		PORT98_FN1),
+	PINMUX_DATA(MEMC_INT_MARK,		PORT99_FN1),
+	PINMUX_DATA(VIO_VD_MARK,		PORT100_FN1),
+	PINMUX_DATA(VIO_HD_MARK,		PORT101_FN1),
+	PINMUX_DATA(VIO_D0_MARK,		PORT102_FN1),
+	PINMUX_DATA(VIO_D1_MARK,		PORT103_FN1),
+	PINMUX_DATA(VIO_D2_MARK,		PORT104_FN1),
+	PINMUX_DATA(VIO_D3_MARK,		PORT105_FN1),
+	PINMUX_DATA(VIO_D4_MARK,		PORT106_FN1),
+	PINMUX_DATA(VIO_D5_MARK,		PORT107_FN1),
+	PINMUX_DATA(VIO_D6_MARK,		PORT108_FN1),
+	PINMUX_DATA(VIO_D7_MARK,		PORT109_FN1),
+	PINMUX_DATA(VIO_D8_MARK,		PORT110_FN1),
+	PINMUX_DATA(VIO_D9_MARK,		PORT111_FN1),
+	PINMUX_DATA(VIO_D10_MARK,		PORT112_FN1),
+	PINMUX_DATA(VIO_D11_MARK,		PORT113_FN1),
+	PINMUX_DATA(VIO_D12_MARK,		PORT114_FN1),
+	PINMUX_DATA(VIO_D13_MARK,		PORT115_FN1),
+	PINMUX_DATA(VIO_D14_MARK,		PORT116_FN1),
+	PINMUX_DATA(VIO_D15_MARK,		PORT117_FN1),
+	PINMUX_DATA(VIO_CLK_MARK,		PORT118_FN1),
+	PINMUX_DATA(VIO_FIELD_MARK,		PORT119_FN1),
+	PINMUX_DATA(VIO_CKO_MARK,		PORT120_FN1),
+	PINMUX_DATA(LCDD0_MARK,			PORT121_FN1),
+	PINMUX_DATA(LCDD1_MARK,			PORT122_FN1),
+	PINMUX_DATA(LCDD2_MARK,			PORT123_FN1),
+	PINMUX_DATA(LCDD3_MARK,			PORT124_FN1),
+	PINMUX_DATA(LCDD4_MARK,			PORT125_FN1),
+	PINMUX_DATA(LCDD5_MARK,			PORT126_FN1),
+	PINMUX_DATA(LCDD6_MARK,			PORT127_FN1),
+	PINMUX_DATA(LCDD7_MARK,			PORT128_FN1),
+	PINMUX_DATA(LCDD8_MARK,			PORT129_FN1),
+	PINMUX_DATA(LCDD9_MARK,			PORT130_FN1),
+	PINMUX_DATA(LCDD10_MARK,		PORT131_FN1),
+	PINMUX_DATA(LCDD11_MARK,		PORT132_FN1),
+	PINMUX_DATA(LCDD12_MARK,		PORT133_FN1),
+	PINMUX_DATA(LCDD13_MARK,		PORT134_FN1),
+	PINMUX_DATA(LCDD14_MARK,		PORT135_FN1),
+	PINMUX_DATA(LCDD15_MARK,		PORT136_FN1),
+	PINMUX_DATA(LCDD16_MARK,		PORT137_FN1),
+	PINMUX_DATA(LCDD17_MARK,		PORT138_FN1),
+	PINMUX_DATA(LCDD18_MARK,		PORT139_FN1),
+	PINMUX_DATA(LCDD19_MARK,		PORT140_FN1),
+	PINMUX_DATA(LCDD20_MARK,		PORT141_FN1),
+	PINMUX_DATA(LCDD21_MARK,		PORT142_FN1),
+	PINMUX_DATA(LCDD22_MARK,		PORT143_FN1),
+	PINMUX_DATA(LCDD23_MARK,		PORT144_FN1),
+	PINMUX_DATA(LCDHSYN_MARK,		PORT145_FN1),
+	PINMUX_DATA(LCDVSYN_MARK,		PORT146_FN1),
+	PINMUX_DATA(LCDDCK_MARK,		PORT147_FN1),
+	PINMUX_DATA(LCDRD_MARK,			PORT148_FN1),
+	PINMUX_DATA(LCDDISP_MARK,		PORT149_FN1),
+	PINMUX_DATA(LCDLCLK_MARK,		PORT150_FN1),
+	PINMUX_DATA(LCDDON_MARK,		PORT151_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT152_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT153_FN1),
+	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT154_FN1),
+	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT155_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK,		PORT156_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK,		PORT157_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK,		PORT158_FN1),
+	PINMUX_DATA(TS_SCK1_MARK,		PORT159_FN1),
+	PINMUX_DATA(TPU0TO0_MARK,		PORT160_FN1),
+	PINMUX_DATA(TPU0TO1_MARK,		PORT161_FN1),
+	PINMUX_DATA(SCIFB_SCK_MARK,		PORT162_FN1),
+	PINMUX_DATA(SCIFB_RTS_MARK,		PORT163_FN1),
+	PINMUX_DATA(SCIFB_CTS_MARK,		PORT164_FN1),
+	PINMUX_DATA(SCIFB_TXD_MARK,		PORT165_FN1),
+	PINMUX_DATA(SCIFB_RXD_MARK,		PORT166_FN1),
+	PINMUX_DATA(VBUS0_0_MARK,		PORT167_FN1),
+	PINMUX_DATA(VBUS0_1_MARK,		PORT168_FN1),
+	PINMUX_DATA(HDMI_HPD_MARK,		PORT169_FN1),
+	PINMUX_DATA(HDMI_CEC_MARK,		PORT170_FN1),
+	PINMUX_DATA(SDHICLK0_MARK,		PORT171_FN1),
+	PINMUX_DATA(SDHICD0_MARK,		PORT172_FN1),
+	PINMUX_DATA(SDHID0_0_MARK,		PORT173_FN1),
+	PINMUX_DATA(SDHID0_1_MARK,		PORT174_FN1),
+	PINMUX_DATA(SDHID0_2_MARK,		PORT175_FN1),
+	PINMUX_DATA(SDHID0_3_MARK,		PORT176_FN1),
+	PINMUX_DATA(SDHICMD0_MARK,		PORT177_FN1),
+	PINMUX_DATA(SDHIWP0_MARK,		PORT178_FN1),
+	PINMUX_DATA(SDHICLK1_MARK,		PORT179_FN1),
+	PINMUX_DATA(SDHID1_0_MARK,		PORT180_FN1),
+	PINMUX_DATA(SDHID1_1_MARK,		PORT181_FN1),
+	PINMUX_DATA(SDHID1_2_MARK,		PORT182_FN1),
+	PINMUX_DATA(SDHID1_3_MARK,		PORT183_FN1),
+	PINMUX_DATA(SDHICMD1_MARK,		PORT184_FN1),
+	PINMUX_DATA(SDHICLK2_MARK,		PORT185_FN1),
+	PINMUX_DATA(SDHID2_0_MARK,		PORT186_FN1),
+	PINMUX_DATA(SDHID2_1_MARK,		PORT187_FN1),
+	PINMUX_DATA(SDHID2_2_MARK,		PORT188_FN1),
+	PINMUX_DATA(SDHID2_3_MARK,		PORT189_FN1),
+	PINMUX_DATA(SDHICMD2_MARK,		PORT190_FN1),
+
+	/* Function 2 */
+	PINMUX_DATA(FSIBCK_MARK,		PORT4_FN2),
+	PINMUX_DATA(SCIFA4_RXD_MARK,		PORT5_FN2),
+	PINMUX_DATA(SCIFA4_TXD_MARK,		PORT6_FN2),
+	PINMUX_DATA(SCIFA5_RXD_MARK,		PORT8_FN2),
+	PINMUX_DATA(FSIASPDIF_11_MARK,		PORT11_FN2),
+	PINMUX_DATA(SCIFA5_TXD_MARK,		PORT12_FN2),
+	PINMUX_DATA(FMSIOLR_MARK,		PORT13_FN2),
+	PINMUX_DATA(FMSIOBT_MARK,		PORT14_FN2),
+	PINMUX_DATA(FSIASPDIF_15_MARK,		PORT15_FN2),
+	PINMUX_DATA(FMSIILR_MARK,		PORT16_FN2),
+	PINMUX_DATA(FMSIIBT_MARK,		PORT17_FN2),
+	PINMUX_DATA(BS_MARK,			PORT19_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT36_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT37_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT38_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT39_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT40_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT41_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT42_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT43_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT44_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT45_FN2),
+	PINMUX_DATA(FMSICK_MARK,		PORT65_FN2),
+	PINMUX_DATA(FCE1_MARK,			PORT66_FN2),
+	PINMUX_DATA(BBIF1_RXD_MARK,		PORT76_FN2),
+	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT77_FN2),
+	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT78_FN2),
+	PINMUX_DATA(BBIF1_TXD_MARK,		PORT79_FN2),
+	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT80_FN2),
+	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT81_FN2),
+	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT82_FN2),
+	PINMUX_DATA(BB_RX_FLOW_N_MARK,		PORT83_FN2),
+	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT84_FN2),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT85_FN2),
+	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT86_FN2),
+	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT87_FN2),
+	PINMUX_DATA(MSIOF1_TSCK_88_MARK,	PORT88_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TSYNC_89_MARK,	PORT89_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_TXD_90_MARK,		PORT90_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_RXD_91_MARK,		PORT91_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS1_92_MARK,		PORT92_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(MSIOF1_SS2_93_MARK,		PORT93_FN2, MSEL4CR_10_1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK,		PORT94_FN2),
+	PINMUX_DATA(SCIFA2_RTS1_MARK,		PORT95_FN2),
+	PINMUX_DATA(SCIFA2_TXD1_MARK,		PORT96_FN2),
+	PINMUX_DATA(SCIFA2_RXD1_MARK,		PORT97_FN2),
+	PINMUX_DATA(SCIFA2_SCK1_MARK,		PORT98_FN2),
+	PINMUX_DATA(I2C_SCL2_MARK,		PORT110_FN2),
+	PINMUX_DATA(I2C_SDA2_MARK,		PORT111_FN2),
+	PINMUX_DATA(I2C_SCL3_MARK,		PORT114_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SDA3_MARK,		PORT115_FN2, MSEL4CR_16_1),
+	PINMUX_DATA(I2C_SCL4_MARK,		PORT116_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(I2C_SDA4_MARK,		PORT117_FN2, MSEL4CR_17_1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT134_FN2),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT135_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT136_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT137_FN2),
+	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT138_FN2),
+	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT139_FN2),
+	PINMUX_DATA(SCIFA3_CTS_140_MARK,	PORT140_FN2, MSEL3CR_9_1),
+	PINMUX_DATA(SCIFA3_RTS_141_MARK,	PORT141_FN2),
+	PINMUX_DATA(SCIFA3_SCK_MARK,		PORT142_FN2),
+	PINMUX_DATA(SCIFA3_TXD_MARK,		PORT143_FN2),
+	PINMUX_DATA(SCIFA3_RXD_MARK,		PORT144_FN2),
+	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT148_FN2),
+	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT149_FN2),
+	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT150_FN2),
+	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT151_FN2),
+	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT156_FN2),
+	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT157_FN2),
+	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT158_FN2),
+	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT159_FN2),
+	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT160_FN2),
+	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT161_FN2),
+
+	/* Function 3 */
+	PINMUX_DATA(VIO_CKO1_MARK,		PORT16_FN3),
+	PINMUX_DATA(VIO_CKO2_MARK,		PORT17_FN3),
+	PINMUX_DATA(IDIN_1_18_MARK,		PORT18_FN3, MSEL4CR_14_1),
+	PINMUX_DATA(MSIOF1_TSCK_39_MARK,	PORT39_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TSYNC_40_MARK,	PORT40_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_TXD_41_MARK,		PORT41_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_RXD_42_MARK,		PORT42_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS1_43_MARK,		PORT43_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MSIOF1_SS2_44_MARK,		PORT44_FN3, MSEL4CR_10_0),
+	PINMUX_DATA(MMCD1_0_MARK,		PORT54_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_1_MARK,		PORT55_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_2_MARK,		PORT56_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_3_MARK,		PORT57_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_4_MARK,		PORT58_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_5_MARK,		PORT59_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_6_MARK,		PORT60_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCD1_7_MARK,		PORT61_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(VINT_I_MARK,		PORT65_FN3),
+	PINMUX_DATA(MMCCLK1_MARK,		PORT66_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(MMCCMD1_MARK,		PORT67_FN3, MSEL4CR_15_1),
+	PINMUX_DATA(TPU0TO2_93_MARK,		PORT93_FN3),
+	PINMUX_DATA(TPU0TO2_99_MARK,		PORT99_FN3),
+	PINMUX_DATA(TPU0TO3_MARK,		PORT112_FN3),
+	PINMUX_DATA(IDIN_0_MARK,		PORT113_FN3),
+	PINMUX_DATA(EXTLP_0_MARK,		PORT114_FN3),
+	PINMUX_DATA(OVCN2_0_MARK,		PORT115_FN3),
+	PINMUX_DATA(PWEN_0_MARK,		PORT116_FN3),
+	PINMUX_DATA(OVCN_0_MARK,		PORT117_FN3),
+	PINMUX_DATA(KEYOUT7_MARK,		PORT121_FN3),
+	PINMUX_DATA(KEYOUT6_MARK,		PORT122_FN3),
+	PINMUX_DATA(KEYOUT5_MARK,		PORT123_FN3),
+	PINMUX_DATA(KEYOUT4_MARK,		PORT124_FN3),
+	PINMUX_DATA(KEYOUT3_MARK,		PORT125_FN3),
+	PINMUX_DATA(KEYOUT2_MARK,		PORT126_FN3),
+	PINMUX_DATA(KEYOUT1_MARK,		PORT127_FN3),
+	PINMUX_DATA(KEYOUT0_MARK,		PORT128_FN3),
+	PINMUX_DATA(KEYIN7_MARK,		PORT129_FN3),
+	PINMUX_DATA(KEYIN6_MARK,		PORT130_FN3),
+	PINMUX_DATA(KEYIN5_MARK,		PORT131_FN3),
+	PINMUX_DATA(KEYIN4_MARK,		PORT132_FN3),
+	PINMUX_DATA(KEYIN3_133_MARK,		PORT133_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN2_134_MARK,		PORT134_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN1_135_MARK,		PORT135_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(KEYIN0_136_MARK,		PORT136_FN3, MSEL4CR_18_0),
+	PINMUX_DATA(TS_SPSYNC2_MARK,		PORT137_FN3),
+	PINMUX_DATA(IROUT_139_MARK,		PORT139_FN3),
+	PINMUX_DATA(IRDA_OUT_MARK,		PORT140_FN3),
+	PINMUX_DATA(IRDA_IN_MARK,		PORT141_FN3),
+	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT142_FN3),
+	PINMUX_DATA(TS_SDAT2_MARK,		PORT145_FN3),
+	PINMUX_DATA(TS_SDEN2_MARK,		PORT146_FN3),
+	PINMUX_DATA(TS_SCK2_MARK,		PORT147_FN3),
+
+	/* Function 4 */
+	PINMUX_DATA(SCIFA3_CTS_43_MARK,	PORT43_FN4, MSEL3CR_9_0),
+	PINMUX_DATA(SCIFA3_RTS_44_MARK,	PORT44_FN4),
+	PINMUX_DATA(GP_RX_FLAG_MARK,	PORT76_FN4),
+	PINMUX_DATA(GP_RX_DATA_MARK,	PORT77_FN4),
+	PINMUX_DATA(GP_TX_READY_MARK,	PORT78_FN4),
+	PINMUX_DATA(GP_RX_WAKE_MARK,	PORT79_FN4),
+	PINMUX_DATA(MP_TX_FLAG_MARK,	PORT80_FN4),
+	PINMUX_DATA(MP_TX_DATA_MARK,	PORT81_FN4),
+	PINMUX_DATA(MP_RX_READY_MARK,	PORT82_FN4),
+	PINMUX_DATA(MP_TX_WAKE_MARK,	PORT83_FN4),
+	PINMUX_DATA(MMCD0_0_MARK,	PORT84_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_1_MARK,	PORT85_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_2_MARK,	PORT86_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_3_MARK,	PORT87_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_4_MARK,	PORT88_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_5_MARK,	PORT89_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_6_MARK,	PORT90_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCD0_7_MARK,	PORT91_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(MMCCMD0_MARK,	PORT92_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(SIM_RST_MARK,	PORT94_FN4),
+	PINMUX_DATA(SIM_CLK_MARK,	PORT95_FN4),
+	PINMUX_DATA(SIM_D_MARK,		PORT98_FN4),
+	PINMUX_DATA(MMCCLK0_MARK,	PORT99_FN4, MSEL4CR_15_0),
+	PINMUX_DATA(IDIN_1_113_MARK,	PORT113_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(OVCN_1_114_MARK,	PORT114_FN4, MSEL4CR_14_0),
+	PINMUX_DATA(PWEN_1_115_MARK,	PORT115_FN4),
+	PINMUX_DATA(EXTLP_1_MARK,	PORT116_FN4),
+	PINMUX_DATA(OVCN2_1_MARK,	PORT117_FN4),
+	PINMUX_DATA(KEYIN0_121_MARK,	PORT121_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN1_122_MARK,	PORT122_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN2_123_MARK,	PORT123_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(KEYIN3_124_MARK,	PORT124_FN4, MSEL4CR_18_1),
+	PINMUX_DATA(PWEN_1_138_MARK,	PORT138_FN4),
+	PINMUX_DATA(IROUT_140_MARK,	PORT140_FN4),
+	PINMUX_DATA(LCDCS_MARK,		PORT145_FN4),
+	PINMUX_DATA(LCDWR_MARK,		PORT147_FN4),
+	PINMUX_DATA(LCDRS_MARK,		PORT149_FN4),
+	PINMUX_DATA(OVCN_1_162_MARK,	PORT162_FN4, MSEL4CR_14_1),
+
+	/* Function 5 */
+	PINMUX_DATA(GPI0_MARK,		PORT41_FN5),
+	PINMUX_DATA(GPI1_MARK,		PORT42_FN5),
+	PINMUX_DATA(GPO0_MARK,		PORT43_FN5),
+	PINMUX_DATA(GPO1_MARK,		PORT44_FN5),
+	PINMUX_DATA(I2C_SCL3S_MARK,	PORT137_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SDA3S_MARK,	PORT145_FN5, MSEL4CR_16_0),
+	PINMUX_DATA(I2C_SCL4S_MARK,	PORT146_FN5, MSEL4CR_17_0),
+	PINMUX_DATA(I2C_SDA4S_MARK,	PORT147_FN5, MSEL4CR_17_0),
+
+	/* Function select */
+	PINMUX_DATA(LCDC0_SELECT_MARK,	MSEL3CR_6_0),
+	PINMUX_DATA(LCDC1_SELECT_MARK,	MSEL3CR_6_1),
+
+	PINMUX_DATA(TS0_1SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_0),
+	PINMUX_DATA(TS0_2SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_1),
+	PINMUX_DATA(TS1_1SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_0),
+	PINMUX_DATA(TS1_2SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_1),
+
+	PINMUX_DATA(SDENC_CPG_MARK,	MSEL4CR_19_0),
+	PINMUX_DATA(SDENC_DV_CLKI_MARK,	MSEL4CR_19_1),
+
+	PINMUX_DATA(MFIv6_MARK,		MSEL4CR_6_0),
+	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+	/* PORT */
+	GPIO_PORT_ALL(),
+
+	/* IRQ */
+	GPIO_FN(IRQ0_6),	GPIO_FN(IRQ0_162),	GPIO_FN(IRQ1),
+	GPIO_FN(IRQ2_4),	GPIO_FN(IRQ2_5),	GPIO_FN(IRQ3_8),
+	GPIO_FN(IRQ3_16),	GPIO_FN(IRQ4_17),	GPIO_FN(IRQ4_163),
+	GPIO_FN(IRQ5),		GPIO_FN(IRQ6_39),	GPIO_FN(IRQ6_164),
+	GPIO_FN(IRQ7_40),	GPIO_FN(IRQ7_167),	GPIO_FN(IRQ8_41),
+	GPIO_FN(IRQ8_168),	GPIO_FN(IRQ9_42),	GPIO_FN(IRQ9_169),
+	GPIO_FN(IRQ10),		GPIO_FN(IRQ11),		GPIO_FN(IRQ12_80),
+	GPIO_FN(IRQ12_137),	GPIO_FN(IRQ13_81),	GPIO_FN(IRQ13_145),
+	GPIO_FN(IRQ14_82),	GPIO_FN(IRQ14_146),	GPIO_FN(IRQ15_83),
+	GPIO_FN(IRQ15_147),	GPIO_FN(IRQ16_84),	GPIO_FN(IRQ16_170),
+	GPIO_FN(IRQ17),		GPIO_FN(IRQ18),		GPIO_FN(IRQ19),
+	GPIO_FN(IRQ20),		GPIO_FN(IRQ21),		GPIO_FN(IRQ22),
+	GPIO_FN(IRQ23),		GPIO_FN(IRQ24),		GPIO_FN(IRQ25),
+	GPIO_FN(IRQ26_121),	GPIO_FN(IRQ26_172),	GPIO_FN(IRQ27_122),
+	GPIO_FN(IRQ27_180),	GPIO_FN(IRQ28_123),	GPIO_FN(IRQ28_181),
+	GPIO_FN(IRQ29_129),	GPIO_FN(IRQ29_182),	GPIO_FN(IRQ30_130),
+	GPIO_FN(IRQ30_183),	GPIO_FN(IRQ31_138),	GPIO_FN(IRQ31_184),
+
+	/* MSIOF0 */
+	GPIO_FN(MSIOF0_TSYNC),	GPIO_FN(MSIOF0_TSCK),	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(MSIOF0_MCK1),	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(MSIOF0_TXD),
+
+	/* MSIOF1 */
+	GPIO_FN(MSIOF1_TSCK_39),	GPIO_FN(MSIOF1_TSCK_88),
+	GPIO_FN(MSIOF1_TSYNC_40),	GPIO_FN(MSIOF1_TSYNC_89),
+	GPIO_FN(MSIOF1_TXD_41),		GPIO_FN(MSIOF1_TXD_90),
+	GPIO_FN(MSIOF1_RXD_42),		GPIO_FN(MSIOF1_RXD_91),
+	GPIO_FN(MSIOF1_SS1_43),		GPIO_FN(MSIOF1_SS1_92),
+	GPIO_FN(MSIOF1_SS2_44),		GPIO_FN(MSIOF1_SS2_93),
+	GPIO_FN(MSIOF1_RSCK),		GPIO_FN(MSIOF1_RSYNC),
+	GPIO_FN(MSIOF1_MCK0),		GPIO_FN(MSIOF1_MCK1),
+
+	/* MSIOF2 */
+	GPIO_FN(MSIOF2_RSCK),	GPIO_FN(MSIOF2_RSYNC),	GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_SS1),	GPIO_FN(MSIOF2_SS2),
+	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_TSCK),	GPIO_FN(MSIOF2_RXD),
+	GPIO_FN(MSIOF2_TXD),
+
+	/* MSIOF3 */
+	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TSYNC),	GPIO_FN(BBIF1_TSCK),
+	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
+	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BB_RX_FLOW_N),
+
+	/* MSIOF4 */
+	GPIO_FN(BBIF2_TSCK1),	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(BBIF2_TXD1),	GPIO_FN(BBIF2_RXD),
+
+	/* FSI */
+	GPIO_FN(FSIACK),	GPIO_FN(FSIBCK),	GPIO_FN(FSIAILR),
+	GPIO_FN(FSIAIBT),	GPIO_FN(FSIAISLD),	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIAOLR),	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),
+	GPIO_FN(FSIASPDIF_11),	GPIO_FN(FSIASPDIF_15),
+
+	/* FMSI */
+	GPIO_FN(FMSOCK),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT),	GPIO_FN(FMSIOBT),	GPIO_FN(FMSOSLD),
+	GPIO_FN(FMSOILR),	GPIO_FN(FMSIILR),	GPIO_FN(FMSOIBT),
+	GPIO_FN(FMSIIBT),	GPIO_FN(FMSISLD),	GPIO_FN(FMSICK),
+
+	/* SCIFA0 */
+	GPIO_FN(SCIFA0_TXD),	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_SCK),
+	GPIO_FN(SCIFA0_RTS),	GPIO_FN(SCIFA0_CTS),
+
+	/* SCIFA1 */
+	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_SCK),
+	GPIO_FN(SCIFA1_RTS),	GPIO_FN(SCIFA1_CTS),
+
+	/* SCIFA2 */
+	GPIO_FN(SCIFA2_CTS1),	GPIO_FN(SCIFA2_RTS1),	GPIO_FN(SCIFA2_TXD1),
+	GPIO_FN(SCIFA2_RXD1),	GPIO_FN(SCIFA2_SCK1),
+
+	/* SCIFA3 */
+	GPIO_FN(SCIFA3_CTS_43),		GPIO_FN(SCIFA3_CTS_140),
+	GPIO_FN(SCIFA3_RTS_44),		GPIO_FN(SCIFA3_RTS_141),
+	GPIO_FN(SCIFA3_SCK),		GPIO_FN(SCIFA3_TXD),
+	GPIO_FN(SCIFA3_RXD),
+
+	/* SCIFA4 */
+	GPIO_FN(SCIFA4_RXD),	GPIO_FN(SCIFA4_TXD),
+
+	/* SCIFA5 */
+	GPIO_FN(SCIFA5_RXD),	GPIO_FN(SCIFA5_TXD),
+
+	/* SCIFB */
+	GPIO_FN(SCIFB_SCK),	GPIO_FN(SCIFB_RTS),	GPIO_FN(SCIFB_CTS),
+	GPIO_FN(SCIFB_TXD),	GPIO_FN(SCIFB_RXD),
+
+	/* CEU */
+	GPIO_FN(VIO_HD),	GPIO_FN(VIO_CKO1),	GPIO_FN(VIO_CKO2),
+	GPIO_FN(VIO_VD),	GPIO_FN(VIO_CLK),	GPIO_FN(VIO_FIELD),
+	GPIO_FN(VIO_CKO),	GPIO_FN(VIO_D0),	GPIO_FN(VIO_D1),
+	GPIO_FN(VIO_D2),	GPIO_FN(VIO_D3),	GPIO_FN(VIO_D4),
+	GPIO_FN(VIO_D5),	GPIO_FN(VIO_D6),	GPIO_FN(VIO_D7),
+	GPIO_FN(VIO_D8),	GPIO_FN(VIO_D9),	GPIO_FN(VIO_D10),
+	GPIO_FN(VIO_D11),	GPIO_FN(VIO_D12),	GPIO_FN(VIO_D13),
+	GPIO_FN(VIO_D14),	GPIO_FN(VIO_D15),
+
+	/* USB0 */
+	GPIO_FN(IDIN_0),	GPIO_FN(EXTLP_0),	GPIO_FN(OVCN2_0),
+	GPIO_FN(PWEN_0),	GPIO_FN(OVCN_0),	GPIO_FN(VBUS0_0),
+
+	/* USB1 */
+	GPIO_FN(IDIN_1_18),	GPIO_FN(IDIN_1_113),
+	GPIO_FN(OVCN_1_114),	GPIO_FN(OVCN_1_162),
+	GPIO_FN(PWEN_1_115),	GPIO_FN(PWEN_1_138),
+	GPIO_FN(EXTLP_1),	GPIO_FN(OVCN2_1),
+	GPIO_FN(VBUS0_1),
+
+	/* GPIO */
+	GPIO_FN(GPI0),	GPIO_FN(GPI1),	GPIO_FN(GPO0),	GPIO_FN(GPO1),
+
+	/* BSC */
+	GPIO_FN(BS),	GPIO_FN(WE1),	GPIO_FN(CKO),
+	GPIO_FN(WAIT),	GPIO_FN(RDWR),
+
+	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),
+	GPIO_FN(A3),	GPIO_FN(A6),	GPIO_FN(A7),
+	GPIO_FN(A8),	GPIO_FN(A9),	GPIO_FN(A10),
+	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
+	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),
+	GPIO_FN(A17),	GPIO_FN(A18),	GPIO_FN(A19),
+	GPIO_FN(A20),	GPIO_FN(A21),	GPIO_FN(A22),
+	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
+	GPIO_FN(A26),
+
+	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
+	GPIO_FN(CS5A),	GPIO_FN(CS5B),	GPIO_FN(CS6A),
+
+	/* BSC/FLCTL */
+	GPIO_FN(RD_FSC),	GPIO_FN(WE0_FWE),	GPIO_FN(A4_FOE),
+	GPIO_FN(A5_FCDE),	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),
+	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	GPIO_FN(D4_NAF4),
+	GPIO_FN(D5_NAF5),	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),
+	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	GPIO_FN(D10_NAF10),
+	GPIO_FN(D11_NAF11),	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),
+	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),
+
+	/* MMCIF(1) */
+	GPIO_FN(MMCD0_0),	GPIO_FN(MMCD0_1),	GPIO_FN(MMCD0_2),
+	GPIO_FN(MMCD0_3),	GPIO_FN(MMCD0_4),	GPIO_FN(MMCD0_5),
+	GPIO_FN(MMCD0_6),	GPIO_FN(MMCD0_7),	GPIO_FN(MMCCMD0),
+	GPIO_FN(MMCCLK0),
+
+	/* MMCIF(2) */
+	GPIO_FN(MMCD1_0),	GPIO_FN(MMCD1_1),	GPIO_FN(MMCD1_2),
+	GPIO_FN(MMCD1_3),	GPIO_FN(MMCD1_4),	GPIO_FN(MMCD1_5),
+	GPIO_FN(MMCD1_6),	GPIO_FN(MMCD1_7),	GPIO_FN(MMCCLK1),
+	GPIO_FN(MMCCMD1),
+
+	/* SPU2 */
+	GPIO_FN(VINT_I),
+
+	/* FLCTL */
+	GPIO_FN(FCE1),	GPIO_FN(FCE0),	GPIO_FN(FRB),
+
+	/* HSI */
+	GPIO_FN(GP_RX_FLAG),	GPIO_FN(GP_RX_DATA),	GPIO_FN(GP_TX_READY),
+	GPIO_FN(GP_RX_WAKE),	GPIO_FN(MP_TX_FLAG),	GPIO_FN(MP_TX_DATA),
+	GPIO_FN(MP_RX_READY),	GPIO_FN(MP_TX_WAKE),
+
+	/* MFI */
+	GPIO_FN(MFIv6),
+	GPIO_FN(MFIv4),
+
+	GPIO_FN(MEMC_BUSCLK_MEMC_A0),	GPIO_FN(MEMC_ADV_MEMC_DREQ0),
+	GPIO_FN(MEMC_WAIT_MEMC_DREQ1),	GPIO_FN(MEMC_CS1_MEMC_A1),
+	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_NOE),
+	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_INT),
+
+	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
+	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
+	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
+	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
+	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
+	GPIO_FN(MEMC_AD15),
+
+	/* SIM */
+	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),	GPIO_FN(SIM_D),
+
+	/* TPU */
+	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO2_93),
+	GPIO_FN(TPU0TO2_99),	GPIO_FN(TPU0TO3),
+
+	/* I2C2 */
+	GPIO_FN(I2C_SCL2),	GPIO_FN(I2C_SDA2),
+
+	/* I2C3(1) */
+	GPIO_FN(I2C_SCL3),	GPIO_FN(I2C_SDA3),
+
+	/* I2C3(2) */
+	GPIO_FN(I2C_SCL3S),	GPIO_FN(I2C_SDA3S),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4),	GPIO_FN(I2C_SDA4),
+
+	/* I2C4(2) */
+	GPIO_FN(I2C_SCL4S),	GPIO_FN(I2C_SDA4S),
+
+	/* KEYSC */
+	GPIO_FN(KEYOUT0),	GPIO_FN(KEYIN0_121),	GPIO_FN(KEYIN0_136),
+	GPIO_FN(KEYOUT1),	GPIO_FN(KEYIN1_122),	GPIO_FN(KEYIN1_135),
+	GPIO_FN(KEYOUT2),	GPIO_FN(KEYIN2_123),	GPIO_FN(KEYIN2_134),
+	GPIO_FN(KEYOUT3),	GPIO_FN(KEYIN3_124),	GPIO_FN(KEYIN3_133),
+	GPIO_FN(KEYOUT4),	GPIO_FN(KEYIN4),	GPIO_FN(KEYOUT5),
+	GPIO_FN(KEYIN5),	GPIO_FN(KEYOUT6),	GPIO_FN(KEYIN6),
+	GPIO_FN(KEYOUT7),	GPIO_FN(KEYIN7),
+
+	/* LCDC */
+	GPIO_FN(LCDHSYN),	GPIO_FN(LCDCS),	GPIO_FN(LCDVSYN),
+	GPIO_FN(LCDDCK),	GPIO_FN(LCDWR),	GPIO_FN(LCDRD),
+	GPIO_FN(LCDDISP),	GPIO_FN(LCDRS),	GPIO_FN(LCDLCLK),
+	GPIO_FN(LCDDON),
+
+	GPIO_FN(LCDD0),		GPIO_FN(LCDD1),		GPIO_FN(LCDD2),
+	GPIO_FN(LCDD3),		GPIO_FN(LCDD4),		GPIO_FN(LCDD5),
+	GPIO_FN(LCDD6),		GPIO_FN(LCDD7),		GPIO_FN(LCDD8),
+	GPIO_FN(LCDD9),		GPIO_FN(LCDD10),	GPIO_FN(LCDD11),
+	GPIO_FN(LCDD12),	GPIO_FN(LCDD13),	GPIO_FN(LCDD14),
+	GPIO_FN(LCDD15),	GPIO_FN(LCDD16),	GPIO_FN(LCDD17),
+	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
+	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
+
+	/* IRDA */
+	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
+	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
+
+	/* TSIF1 */
+	GPIO_FN(TS0_1SELECT),
+	GPIO_FN(TS0_2SELECT),
+	GPIO_FN(TS1_1SELECT),
+	GPIO_FN(TS1_2SELECT),
+
+	GPIO_FN(TS_SPSYNC1),	GPIO_FN(TS_SDAT1),
+	GPIO_FN(TS_SDEN1),	GPIO_FN(TS_SCK1),
+
+	/* TSIF2 */
+	GPIO_FN(TS_SPSYNC2),	GPIO_FN(TS_SDAT2),
+	GPIO_FN(TS_SDEN2),	GPIO_FN(TS_SCK2),
+
+	/* HDMI */
+	GPIO_FN(HDMI_HPD),	GPIO_FN(HDMI_CEC),
+
+	/* SDHI0 */
+	GPIO_FN(SDHICLK0),	GPIO_FN(SDHICD0),	GPIO_FN(SDHICMD0),
+	GPIO_FN(SDHIWP0),	GPIO_FN(SDHID0_0),	GPIO_FN(SDHID0_1),
+	GPIO_FN(SDHID0_2),	GPIO_FN(SDHID0_3),
+
+	/* SDHI1 */
+	GPIO_FN(SDHICLK1),	GPIO_FN(SDHICMD1),	GPIO_FN(SDHID1_0),
+	GPIO_FN(SDHID1_1),	GPIO_FN(SDHID1_2),	GPIO_FN(SDHID1_3),
+
+	/* SDHI2 */
+	GPIO_FN(SDHICLK2),	GPIO_FN(SDHICMD2),	GPIO_FN(SDHID2_0),
+	GPIO_FN(SDHID2_1),	GPIO_FN(SDHID2_2),	GPIO_FN(SDHID2_3),
+
+	/* SDENC */
+	GPIO_FN(SDENC_CPG),
+	GPIO_FN(SDENC_DV_CLKI),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)		\
+	0, (out), (in), 0,			\
+	0, 0, 0, 0,				\
+	0, 0, (in_pd), 0,			\
+	0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)						\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
+		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
+		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
+		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
+		PORT##nr##_FN6, PORT##nr##_FN7 }		\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0,	0xE6051000), /* PORT0CR */
+	PORTCR(1,	0xE6051001), /* PORT1CR */
+	PORTCR(2,	0xE6051002), /* PORT2CR */
+	PORTCR(3,	0xE6051003), /* PORT3CR */
+	PORTCR(4,	0xE6051004), /* PORT4CR */
+	PORTCR(5,	0xE6051005), /* PORT5CR */
+	PORTCR(6,	0xE6051006), /* PORT6CR */
+	PORTCR(7,	0xE6051007), /* PORT7CR */
+	PORTCR(8,	0xE6051008), /* PORT8CR */
+	PORTCR(9,	0xE6051009), /* PORT9CR */
+	PORTCR(10,	0xE605100A), /* PORT10CR */
+	PORTCR(11,	0xE605100B), /* PORT11CR */
+	PORTCR(12,	0xE605100C), /* PORT12CR */
+	PORTCR(13,	0xE605100D), /* PORT13CR */
+	PORTCR(14,	0xE605100E), /* PORT14CR */
+	PORTCR(15,	0xE605100F), /* PORT15CR */
+	PORTCR(16,	0xE6051010), /* PORT16CR */
+	PORTCR(17,	0xE6051011), /* PORT17CR */
+	PORTCR(18,	0xE6051012), /* PORT18CR */
+	PORTCR(19,	0xE6051013), /* PORT19CR */
+	PORTCR(20,	0xE6051014), /* PORT20CR */
+	PORTCR(21,	0xE6051015), /* PORT21CR */
+	PORTCR(22,	0xE6051016), /* PORT22CR */
+	PORTCR(23,	0xE6051017), /* PORT23CR */
+	PORTCR(24,	0xE6051018), /* PORT24CR */
+	PORTCR(25,	0xE6051019), /* PORT25CR */
+	PORTCR(26,	0xE605101A), /* PORT26CR */
+	PORTCR(27,	0xE605101B), /* PORT27CR */
+	PORTCR(28,	0xE605101C), /* PORT28CR */
+	PORTCR(29,	0xE605101D), /* PORT29CR */
+	PORTCR(30,	0xE605101E), /* PORT30CR */
+	PORTCR(31,	0xE605101F), /* PORT31CR */
+	PORTCR(32,	0xE6051020), /* PORT32CR */
+	PORTCR(33,	0xE6051021), /* PORT33CR */
+	PORTCR(34,	0xE6051022), /* PORT34CR */
+	PORTCR(35,	0xE6051023), /* PORT35CR */
+	PORTCR(36,	0xE6051024), /* PORT36CR */
+	PORTCR(37,	0xE6051025), /* PORT37CR */
+	PORTCR(38,	0xE6051026), /* PORT38CR */
+	PORTCR(39,	0xE6051027), /* PORT39CR */
+	PORTCR(40,	0xE6051028), /* PORT40CR */
+	PORTCR(41,	0xE6051029), /* PORT41CR */
+	PORTCR(42,	0xE605102A), /* PORT42CR */
+	PORTCR(43,	0xE605102B), /* PORT43CR */
+	PORTCR(44,	0xE605102C), /* PORT44CR */
+	PORTCR(45,	0xE605102D), /* PORT45CR */
+	PORTCR(46,	0xE605202E), /* PORT46CR */
+	PORTCR(47,	0xE605202F), /* PORT47CR */
+	PORTCR(48,	0xE6052030), /* PORT48CR */
+	PORTCR(49,	0xE6052031), /* PORT49CR */
+	PORTCR(50,	0xE6052032), /* PORT50CR */
+	PORTCR(51,	0xE6052033), /* PORT51CR */
+	PORTCR(52,	0xE6052034), /* PORT52CR */
+	PORTCR(53,	0xE6052035), /* PORT53CR */
+	PORTCR(54,	0xE6052036), /* PORT54CR */
+	PORTCR(55,	0xE6052037), /* PORT55CR */
+	PORTCR(56,	0xE6052038), /* PORT56CR */
+	PORTCR(57,	0xE6052039), /* PORT57CR */
+	PORTCR(58,	0xE605203A), /* PORT58CR */
+	PORTCR(59,	0xE605203B), /* PORT59CR */
+	PORTCR(60,	0xE605203C), /* PORT60CR */
+	PORTCR(61,	0xE605203D), /* PORT61CR */
+	PORTCR(62,	0xE605203E), /* PORT62CR */
+	PORTCR(63,	0xE605203F), /* PORT63CR */
+	PORTCR(64,	0xE6052040), /* PORT64CR */
+	PORTCR(65,	0xE6052041), /* PORT65CR */
+	PORTCR(66,	0xE6052042), /* PORT66CR */
+	PORTCR(67,	0xE6052043), /* PORT67CR */
+	PORTCR(68,	0xE6052044), /* PORT68CR */
+	PORTCR(69,	0xE6052045), /* PORT69CR */
+	PORTCR(70,	0xE6052046), /* PORT70CR */
+	PORTCR(71,	0xE6052047), /* PORT71CR */
+	PORTCR(72,	0xE6052048), /* PORT72CR */
+	PORTCR(73,	0xE6052049), /* PORT73CR */
+	PORTCR(74,	0xE605204A), /* PORT74CR */
+	PORTCR(75,	0xE605204B), /* PORT75CR */
+	PORTCR(76,	0xE605004C), /* PORT76CR */
+	PORTCR(77,	0xE605004D), /* PORT77CR */
+	PORTCR(78,	0xE605004E), /* PORT78CR */
+	PORTCR(79,	0xE605004F), /* PORT79CR */
+	PORTCR(80,	0xE6050050), /* PORT80CR */
+	PORTCR(81,	0xE6050051), /* PORT81CR */
+	PORTCR(82,	0xE6050052), /* PORT82CR */
+	PORTCR(83,	0xE6050053), /* PORT83CR */
+	PORTCR(84,	0xE6050054), /* PORT84CR */
+	PORTCR(85,	0xE6050055), /* PORT85CR */
+	PORTCR(86,	0xE6050056), /* PORT86CR */
+	PORTCR(87,	0xE6050057), /* PORT87CR */
+	PORTCR(88,	0xE6050058), /* PORT88CR */
+	PORTCR(89,	0xE6050059), /* PORT89CR */
+	PORTCR(90,	0xE605005A), /* PORT90CR */
+	PORTCR(91,	0xE605005B), /* PORT91CR */
+	PORTCR(92,	0xE605005C), /* PORT92CR */
+	PORTCR(93,	0xE605005D), /* PORT93CR */
+	PORTCR(94,	0xE605005E), /* PORT94CR */
+	PORTCR(95,	0xE605005F), /* PORT95CR */
+	PORTCR(96,	0xE6050060), /* PORT96CR */
+	PORTCR(97,	0xE6050061), /* PORT97CR */
+	PORTCR(98,	0xE6050062), /* PORT98CR */
+	PORTCR(99,	0xE6050063), /* PORT99CR */
+	PORTCR(100,	0xE6053064), /* PORT100CR */
+	PORTCR(101,	0xE6053065), /* PORT101CR */
+	PORTCR(102,	0xE6053066), /* PORT102CR */
+	PORTCR(103,	0xE6053067), /* PORT103CR */
+	PORTCR(104,	0xE6053068), /* PORT104CR */
+	PORTCR(105,	0xE6053069), /* PORT105CR */
+	PORTCR(106,	0xE605306A), /* PORT106CR */
+	PORTCR(107,	0xE605306B), /* PORT107CR */
+	PORTCR(108,	0xE605306C), /* PORT108CR */
+	PORTCR(109,	0xE605306D), /* PORT109CR */
+	PORTCR(110,	0xE605306E), /* PORT110CR */
+	PORTCR(111,	0xE605306F), /* PORT111CR */
+	PORTCR(112,	0xE6053070), /* PORT112CR */
+	PORTCR(113,	0xE6053071), /* PORT113CR */
+	PORTCR(114,	0xE6053072), /* PORT114CR */
+	PORTCR(115,	0xE6053073), /* PORT115CR */
+	PORTCR(116,	0xE6053074), /* PORT116CR */
+	PORTCR(117,	0xE6053075), /* PORT117CR */
+	PORTCR(118,	0xE6053076), /* PORT118CR */
+	PORTCR(119,	0xE6053077), /* PORT119CR */
+	PORTCR(120,	0xE6053078), /* PORT120CR */
+	PORTCR(121,	0xE6050079), /* PORT121CR */
+	PORTCR(122,	0xE605007A), /* PORT122CR */
+	PORTCR(123,	0xE605007B), /* PORT123CR */
+	PORTCR(124,	0xE605007C), /* PORT124CR */
+	PORTCR(125,	0xE605007D), /* PORT125CR */
+	PORTCR(126,	0xE605007E), /* PORT126CR */
+	PORTCR(127,	0xE605007F), /* PORT127CR */
+	PORTCR(128,	0xE6050080), /* PORT128CR */
+	PORTCR(129,	0xE6050081), /* PORT129CR */
+	PORTCR(130,	0xE6050082), /* PORT130CR */
+	PORTCR(131,	0xE6050083), /* PORT131CR */
+	PORTCR(132,	0xE6050084), /* PORT132CR */
+	PORTCR(133,	0xE6050085), /* PORT133CR */
+	PORTCR(134,	0xE6050086), /* PORT134CR */
+	PORTCR(135,	0xE6050087), /* PORT135CR */
+	PORTCR(136,	0xE6050088), /* PORT136CR */
+	PORTCR(137,	0xE6050089), /* PORT137CR */
+	PORTCR(138,	0xE605008A), /* PORT138CR */
+	PORTCR(139,	0xE605008B), /* PORT139CR */
+	PORTCR(140,	0xE605008C), /* PORT140CR */
+	PORTCR(141,	0xE605008D), /* PORT141CR */
+	PORTCR(142,	0xE605008E), /* PORT142CR */
+	PORTCR(143,	0xE605008F), /* PORT143CR */
+	PORTCR(144,	0xE6050090), /* PORT144CR */
+	PORTCR(145,	0xE6050091), /* PORT145CR */
+	PORTCR(146,	0xE6050092), /* PORT146CR */
+	PORTCR(147,	0xE6050093), /* PORT147CR */
+	PORTCR(148,	0xE6050094), /* PORT148CR */
+	PORTCR(149,	0xE6050095), /* PORT149CR */
+	PORTCR(150,	0xE6050096), /* PORT150CR */
+	PORTCR(151,	0xE6050097), /* PORT151CR */
+	PORTCR(152,	0xE6053098), /* PORT152CR */
+	PORTCR(153,	0xE6053099), /* PORT153CR */
+	PORTCR(154,	0xE605309A), /* PORT154CR */
+	PORTCR(155,	0xE605309B), /* PORT155CR */
+	PORTCR(156,	0xE605009C), /* PORT156CR */
+	PORTCR(157,	0xE605009D), /* PORT157CR */
+	PORTCR(158,	0xE605009E), /* PORT158CR */
+	PORTCR(159,	0xE605009F), /* PORT159CR */
+	PORTCR(160,	0xE60500A0), /* PORT160CR */
+	PORTCR(161,	0xE60500A1), /* PORT161CR */
+	PORTCR(162,	0xE60500A2), /* PORT162CR */
+	PORTCR(163,	0xE60500A3), /* PORT163CR */
+	PORTCR(164,	0xE60500A4), /* PORT164CR */
+	PORTCR(165,	0xE60500A5), /* PORT165CR */
+	PORTCR(166,	0xE60500A6), /* PORT166CR */
+	PORTCR(167,	0xE60520A7), /* PORT167CR */
+	PORTCR(168,	0xE60520A8), /* PORT168CR */
+	PORTCR(169,	0xE60520A9), /* PORT169CR */
+	PORTCR(170,	0xE60520AA), /* PORT170CR */
+	PORTCR(171,	0xE60520AB), /* PORT171CR */
+	PORTCR(172,	0xE60520AC), /* PORT172CR */
+	PORTCR(173,	0xE60520AD), /* PORT173CR */
+	PORTCR(174,	0xE60520AE), /* PORT174CR */
+	PORTCR(175,	0xE60520AF), /* PORT175CR */
+	PORTCR(176,	0xE60520B0), /* PORT176CR */
+	PORTCR(177,	0xE60520B1), /* PORT177CR */
+	PORTCR(178,	0xE60520B2), /* PORT178CR */
+	PORTCR(179,	0xE60520B3), /* PORT179CR */
+	PORTCR(180,	0xE60520B4), /* PORT180CR */
+	PORTCR(181,	0xE60520B5), /* PORT181CR */
+	PORTCR(182,	0xE60520B6), /* PORT182CR */
+	PORTCR(183,	0xE60520B7), /* PORT183CR */
+	PORTCR(184,	0xE60520B8), /* PORT184CR */
+	PORTCR(185,	0xE60520B9), /* PORT185CR */
+	PORTCR(186,	0xE60520BA), /* PORT186CR */
+	PORTCR(187,	0xE60520BB), /* PORT187CR */
+	PORTCR(188,	0xE60520BC), /* PORT188CR */
+	PORTCR(189,	0xE60520BD), /* PORT189CR */
+	PORTCR(190,	0xE60520BE), /* PORT190CR */
+
+	{ PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
+			MSEL1CR_31_0,	MSEL1CR_31_1,
+			MSEL1CR_30_0,	MSEL1CR_30_1,
+			MSEL1CR_29_0,	MSEL1CR_29_1,
+			MSEL1CR_28_0,	MSEL1CR_28_1,
+			MSEL1CR_27_0,	MSEL1CR_27_1,
+			MSEL1CR_26_0,	MSEL1CR_26_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			MSEL1CR_16_0,	MSEL1CR_16_1,
+			MSEL1CR_15_0,	MSEL1CR_15_1,
+			MSEL1CR_14_0,	MSEL1CR_14_1,
+			MSEL1CR_13_0,	MSEL1CR_13_1,
+			MSEL1CR_12_0,	MSEL1CR_12_1,
+			0, 0, 0, 0,
+			MSEL1CR_9_0,	MSEL1CR_9_1,
+			MSEL1CR_8_0,	MSEL1CR_8_1,
+			MSEL1CR_7_0,	MSEL1CR_7_1,
+			MSEL1CR_6_0,	MSEL1CR_6_1,
+			0, 0,
+			MSEL1CR_4_0,	MSEL1CR_4_1,
+			MSEL1CR_3_0,	MSEL1CR_3_1,
+			MSEL1CR_2_0,	MSEL1CR_2_1,
+			0, 0,
+			MSEL1CR_0_0,	MSEL1CR_0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_27_0,	MSEL3CR_27_1,
+			MSEL3CR_26_0,	MSEL3CR_26_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_21_0,	MSEL3CR_21_1,
+			MSEL3CR_20_0,	MSEL3CR_20_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL3CR_15_0,	MSEL3CR_15_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL3CR_9_0,	MSEL3CR_9_1,
+			0, 0, 0, 0,
+			MSEL3CR_6_0,	MSEL3CR_6_1,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			MSEL4CR_19_0,	MSEL4CR_19_1,
+			MSEL4CR_18_0,	MSEL4CR_18_1,
+			MSEL4CR_17_0,	MSEL4CR_17_1,
+			MSEL4CR_16_0,	MSEL4CR_16_1,
+			MSEL4CR_15_0,	MSEL4CR_15_1,
+			MSEL4CR_14_0,	MSEL4CR_14_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_10_0,	MSEL4CR_10_1,
+			0, 0, 0, 0,
+			0, 0,
+			MSEL4CR_6_0,	MSEL4CR_6_1,
+			0, 0,
+			MSEL4CR_4_0,	MSEL4CR_4_1,
+			0, 0, 0, 0,
+			MSEL4CR_1_0,	MSEL4CR_1_1,
+			0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
+			PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+			PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT99_DATA,  PORT98_DATA,  PORT97_DATA,  PORT96_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			0, 0, 0, 0,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0,	      PORT166_DATA, PORT165_DATA, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA,  PORT8_DATA,
+			PORT7_DATA,  PORT6_DATA,  PORT5_DATA,  PORT4_DATA,
+			PORT3_DATA,  PORT2_DATA,  PORT1_DATA,  PORT0_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0,
+			0,           0,           PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
+			0,	      PORT190_DATA, PORT189_DATA, PORT188_DATA,
+			PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+			PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+			PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+			PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+			PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+			PORT167_DATA, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, PORT120_DATA,
+			PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			0, 0, 0, 0,
+		}
+	},
+	{ PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
+			0, 0, 0, 0,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_info sh7372_pinmux_info = {
+	.name = "sh7372_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_SDENC_DV_CLKI,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7372_pinmux_init(void)
+{
+	register_pinmux(&sh7372_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
new file mode 100644
index 0000000..613e684
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -0,0 +1,1767 @@
+/*
+ * sh7377 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)				\
+	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
+	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
+	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
+	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
+	_10(fn, pfx##9, sfx)
+
+#define _265(fn, pfx, sfx)				\
+	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
+	_10(fn, pfx##10, sfx),				\
+	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
+	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
+	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
+	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
+	_1(fn, pfx##118, sfx),				\
+	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
+	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
+	_10(fn, pfx##15, sfx),				\
+	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
+	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
+	_1(fn, pfx##164, sfx),				\
+	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
+	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
+	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
+	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
+	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
+	_1(fn, pfx##264, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_265(str) _265(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+
+	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
+	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Special Pull-up / Pull-down Functions */
+	PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
+	PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
+	PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
+	PORT72_KEYIN6_PU_MARK,
+
+	/* 55-1 */
+	VBUS_0_MARK,
+	CPORT0_MARK,
+	CPORT1_MARK,
+	CPORT2_MARK,
+	CPORT3_MARK,
+	CPORT4_MARK,
+	CPORT5_MARK,
+	CPORT6_MARK,
+	CPORT7_MARK,
+	CPORT8_MARK,
+	CPORT9_MARK,
+	CPORT10_MARK,
+	CPORT11_MARK, SIN2_MARK,
+	CPORT12_MARK, XCTS2_MARK,
+	CPORT13_MARK, RFSPO4_MARK,
+	CPORT14_MARK, RFSPO5_MARK,
+	CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
+	CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
+	CPORT17_IC_OE_MARK, SOUT2_MARK,
+	CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
+	CPORT19_MPORT1_MARK,
+	CPORT20_MARK, RFSPO6_MARK,
+	CPORT21_MARK, STATUS0_MARK,
+	CPORT22_MARK, STATUS1_MARK,
+	CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+	B_SYNLD1_MARK,
+	B_SYNLD2_MARK, SYSENMSK_MARK,
+	XMAINPS_MARK,
+	XDIVPS_MARK,
+	XIDRST_MARK,
+	IDCLK_MARK, IC_DP_MARK,
+	IDIO_MARK, IC_DM_MARK,
+	SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
+	SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+	XCTS1_MARK, SCIFA4_CTS_MARK,
+	PCMCLKO_MARK,
+	SYNC8KO_MARK,
+
+	/* 55-2 */
+	DNPCM_A_MARK,
+	UPPCM_A_MARK,
+	VACK_MARK,
+	XTALB1L_MARK,
+	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+	GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
+	GPS_IM_MARK,
+	GPS_IS_MARK,
+	GPS_QM_MARK,
+	GPS_QS_MARK,
+	FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
+	FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
+	FMSIOLR_MARK,
+	FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
+	FMSIOBT_MARK,
+	FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
+	FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
+	FMSIILR_MARK,
+	FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
+	FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
+	A0_EA0_MARK, BS_MARK,
+	A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
+	A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
+	A14_EA14_MARK, PORT60_KEYOUT5_MARK,
+	A15_EA15_MARK, PORT61_KEYOUT4_MARK,
+	A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
+	A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+	A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+	A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
+	A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
+	A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+	A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
+	A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
+	A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
+	A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, PORT72_KEYIN6_MARK,
+	D0_ED0_NAF0_MARK,
+	D1_ED1_NAF1_MARK,
+	D2_ED2_NAF2_MARK,
+	D3_ED3_NAF3_MARK,
+	D4_ED4_NAF4_MARK,
+	D5_ED5_NAF5_MARK,
+	D6_ED6_NAF6_MARK,
+	D7_ED7_NAF7_MARK,
+	D8_ED8_NAF8_MARK,
+	D9_ED9_NAF9_MARK,
+	D10_ED10_NAF10_MARK,
+	D11_ED11_NAF11_MARK,
+	D12_ED12_NAF12_MARK,
+	D13_ED13_NAF13_MARK,
+	D14_ED14_NAF14_MARK,
+	D15_ED15_NAF15_MARK,
+	CS4_MARK,
+	CS5A_MARK, FMSICK_MARK,
+	CS5B_MARK, FCE1_MARK,
+
+	/* 55-3 */
+	CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
+	FCE0_MARK,
+	WAIT_MARK, DREQ0_MARK,
+	RD_XRD_MARK,
+	WE0_XWR0_FWE_MARK,
+	WE1_XWR1_MARK,
+	FRB_MARK,
+	CKO_MARK,
+	NBRSTOUT_MARK,
+	NBRST_MARK,
+	GPS_EPPSIN_MARK,
+	LATCHPULSE_MARK,
+	LTESIGNAL_MARK,
+	LEGACYSTATE_MARK,
+	TCKON_MARK,
+	VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
+	VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
+	VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
+	VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
+	VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
+	VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
+	VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
+	VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
+	VIO_D6_MARK, PORT136_KEYIN2_MARK,
+	VIO_D7_MARK, PORT137_KEYIN3_MARK,
+	VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
+	VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
+	VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
+	VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
+	VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
+	VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
+	VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
+	VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
+	VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
+	VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
+	VIO_CKO_MARK, PORT148_KEYIN6_MARK,
+	A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
+	MFG0_IN2_MARK,
+	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+	SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+	SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
+	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
+
+	/* 55-4 */
+	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
+	PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
+	MFG3_IN2_MARK,
+	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
+	MFG3_IN1_MARK,
+	PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
+	MFG3_OUT1_MARK, TPU3TO0_MARK,
+	LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
+	LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
+	BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
+	BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
+	BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
+	LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
+	MFG2_OUT2_MARK,
+	TPU2TO1_MARK,
+	LCDD6_MARK, XWR2_MARK,
+	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+	LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
+	LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
+	LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
+	LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
+	LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
+	LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
+	LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
+	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
+	VIO_DR7_MARK, D23_MARK, ED23_MARK,
+	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
+	VIO_VDR_MARK, D24_MARK, ED24_MARK,
+	LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
+	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
+	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
+	LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
+	LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
+	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+	PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
+	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
+	LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
+	SCIFA1_TXD_MARK, OVCN2_MARK,
+	EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
+	SCIFA1_RTS_MARK, IDIN_MARK,
+	SCIFA1_RXD_MARK,
+	SCIFA1_CTS_MARK, MFG1_IN1_MARK,
+	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
+	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
+	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
+	PORT233_FSIACK_MARK,
+	MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
+	MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
+	MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
+	MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
+	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+
+	/* 55-5 */
+	MSIOF1_SS2_MARK,
+	SCIFA6_TXD_MARK,
+	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
+	TPU4TO0_MARK,
+	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+	PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
+	PORT244_MSIOF2_RXD_MARK,
+	PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
+	PORT245_MSIOF2_TXD_MARK,
+	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
+	TPU1TO0_MARK,
+	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
+	TPU3TO1_MARK,
+	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
+	TPU2TO0_MARK,
+	PORT248_MSIOF2_TSCK_MARK,
+	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
+	SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
+	SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
+	SDHID0_2_MARK, TDI2_MARK,
+	SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
+	SDHICMD0_MARK, TRST2_MARK,
+	SDHIWP0_MARK, EDBGREQ2_MARK,
+	SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
+	SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
+	TMS3_SWDIO_MC1_MARK,
+	SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
+	SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
+	SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
+	SDHICMD1_MARK, TRST3_MARK,
+	RESETOUTS_MARK,
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+	/* 55-1 (GPIO) */
+	PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
+	PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
+	PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
+	PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
+	PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
+	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_O(16), PORT_DATA_IO(17),
+	PORT_DATA_O(18), PORT_DATA_O(19),
+	PORT_DATA_O(20), PORT_DATA_O(21),
+	PORT_DATA_O(22), PORT_DATA_O(23),
+	PORT_DATA_O(24), PORT_DATA_I_PD(25),
+	PORT_DATA_I_PD(26), PORT_DATA_O(27),
+	PORT_DATA_O(28), PORT_DATA_O(29),
+	PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
+	PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
+	PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
+	PORT_DATA_O(36), PORT_DATA_IO(37),
+
+	/* 55-2 (GPIO) */
+	PORT_DATA_O(38), PORT_DATA_I_PU(39),
+	PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
+	PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
+	PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
+	PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
+	PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
+	PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
+	PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
+	PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
+	PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
+	PORT_DATA_IO(58), PORT_DATA_IO(59),
+	PORT_DATA_IO(60), PORT_DATA_IO(61),
+	PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+	PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
+	PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
+	PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
+	PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
+	PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
+	PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
+	PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
+	PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
+	PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
+	PORT_DATA_O(90), PORT_DATA_IO_PU(91),
+	PORT_DATA_O(92),
+
+	/* 55-3 (GPIO) */
+	PORT_DATA_IO_PU(93),
+	PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO(96), PORT_DATA_IO(97),
+	PORT_DATA_IO(98), PORT_DATA_I_PU(99),
+	PORT_DATA_O(100), PORT_DATA_O(101),
+	PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
+	PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
+	PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
+	PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
+	PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
+	PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
+	PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
+	PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
+	PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
+	PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
+	PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
+	PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
+	PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
+	PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
+	PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
+	PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
+	PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
+	PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
+	PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
+	PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
+	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
+	PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
+	PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
+
+	/* 55-4 (GPIO) */
+	PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
+	PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
+	PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
+	PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
+	PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
+	PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
+	PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
+	PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
+	PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
+	PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
+	PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
+	PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
+	PORT_DATA_O(218), PORT_DATA_IO_PD(219),
+	PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
+	PORT_DATA_IO_PU_PD(222),
+	PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
+	PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
+	PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
+	PORT_DATA_I_PD(229), PORT_DATA_IO(230),
+	PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
+	PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
+	PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
+
+	/* 55-5 (GPIO) */
+	PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
+	PORT_DATA_O(241), PORT_DATA_I_PD(242),
+	PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
+	PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
+	PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
+	PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
+	PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
+	PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
+	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
+	PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
+	PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
+	PORT_DATA_IO_PU_PD(263),
+
+	/* Special Pull-up / Pull-down Functions */
+	PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT66_FN2, PORT66_IN_PU),
+	PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT67_FN2, PORT67_IN_PU),
+	PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT68_FN2, PORT68_IN_PU),
+	PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT69_FN2, PORT69_IN_PU),
+	PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT70_FN2, PORT70_IN_PU),
+	PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT71_FN2, PORT71_IN_PU),
+	PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+				PORT72_FN2, PORT72_IN_PU),
+
+
+	/* 55-1 (FN) */
+	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
+	PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
+	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+	PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
+	PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
+	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+	PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
+	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+	PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
+	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+	PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
+	PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
+	PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
+	PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
+	PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
+	PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
+	PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
+	PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
+	PINMUX_DATA(IDIO_MARK, PORT31_FN1),
+	PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
+	PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+	PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
+	PINMUX_DATA(SIN1_MARK, PORT33_FN1),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
+	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+	PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
+	PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
+	PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
+	PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
+	PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
+	PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
+	PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
+
+	/* 55-2 (FN) */
+	PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
+	PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
+	PINMUX_DATA(VACK_MARK, PORT40_FN1),
+	PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
+	PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
+	PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
+	PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+	PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
+	PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
+	PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
+	PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
+	PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
+	PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
+	PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
+	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
+	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
+	PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
+	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
+	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
+	PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
+	PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
+	PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
+	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
+	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
+	PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
+	PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
+	PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
+	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+	PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
+	PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
+	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
+	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
+	PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
+	PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
+	PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
+	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
+	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
+	PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
+	PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
+	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+	PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
+	PINMUX_DATA(BS_MARK, PORT57_FN2),
+	PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
+	PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
+	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
+	PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
+	PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
+	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+	PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
+	PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
+	PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
+	PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
+	PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
+	PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
+	PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
+	PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
+	PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
+	PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
+	PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
+	PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
+	PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
+	PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
+	PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
+	PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
+	PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
+	PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
+	PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
+	PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
+	PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
+	PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
+	PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
+	PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
+	PINMUX_DATA(A26_MARK, PORT72_FN1),
+	PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
+	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
+	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
+	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
+	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
+	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
+	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
+	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
+	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
+	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
+	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
+	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
+	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
+	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
+	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
+	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
+	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
+	PINMUX_DATA(CS4_MARK, PORT90_FN1),
+	PINMUX_DATA(CS5A_MARK, PORT91_FN1),
+	PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
+	PINMUX_DATA(CS5B_MARK, PORT92_FN1),
+	PINMUX_DATA(FCE1_MARK, PORT92_FN2),
+
+	/* 55-3 (FN) */
+	PINMUX_DATA(CS6B_MARK, PORT93_FN1),
+	PINMUX_DATA(XCS2_MARK, PORT93_FN2),
+	PINMUX_DATA(CS6A_MARK, PORT93_FN3),
+	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+	PINMUX_DATA(FCE0_MARK, PORT94_FN1),
+	PINMUX_DATA(WAIT_MARK, PORT95_FN1),
+	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+	PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
+	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
+	PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
+	PINMUX_DATA(FRB_MARK, PORT99_FN1),
+	PINMUX_DATA(CKO_MARK, PORT100_FN1),
+	PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
+	PINMUX_DATA(NBRST_MARK, PORT102_FN1),
+	PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
+	PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
+	PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
+	PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
+	PINMUX_DATA(TCKON_MARK, PORT118_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
+	PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
+	PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
+	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
+	PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
+	PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
+	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
+	PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
+	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
+	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
+	PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
+	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
+	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
+	PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
+	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
+	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
+	PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
+	PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
+	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
+	PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
+	PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
+	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
+	PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
+	PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
+	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
+	PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
+	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
+	PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
+	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
+	PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
+	PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
+	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
+	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
+	PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
+	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
+	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
+	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
+	PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
+	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
+	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
+	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
+	PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
+	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
+	PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
+	PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
+	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
+	PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
+	PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
+	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
+	PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
+	PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
+	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
+	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
+	PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
+	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
+	PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
+	PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
+	PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
+	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+	PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
+	PINMUX_DATA(A27_MARK, PORT149_FN1),
+	PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
+	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
+	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
+	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
+	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
+	PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
+	PINMUX_DATA(SIN3_MARK, PORT155_FN1),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
+	PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
+	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
+	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
+	PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
+	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
+	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
+
+	/* 55-4 (FN) */
+	PINMUX_DATA(DINT_MARK, PORT158_FN1),
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
+	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
+	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
+	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
+	PINMUX_DATA(NMI_MARK, PORT159_FN3),
+	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
+	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
+	PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
+	PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
+	PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
+	PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
+	PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
+	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
+	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
+	PINMUX_DATA(SIN0_MARK, PORT162_FN3),
+	PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
+	PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
+	PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
+	PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
+	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+	PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
+	PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
+	PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
+	PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
+	PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
+	PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
+	PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
+	PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
+	PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
+	PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
+	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
+	PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
+	PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
+	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
+	PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
+	PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
+	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
+	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+	PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
+	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
+	PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
+	PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
+	PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
+	PINMUX_DATA(D16_MARK, PORT200_FN4),
+	PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
+	PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
+	PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
+	PINMUX_DATA(D17_MARK, PORT201_FN4),
+	PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
+	PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
+	PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
+	PINMUX_DATA(D18_MARK, PORT202_FN4),
+	PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
+	PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
+	PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
+	PINMUX_DATA(D19_MARK, PORT203_FN4),
+	PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
+	PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
+	PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
+	PINMUX_DATA(D20_MARK, PORT204_FN4),
+	PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
+	PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
+	PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
+	PINMUX_DATA(D21_MARK, PORT205_FN4),
+	PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
+	PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
+	PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
+	PINMUX_DATA(D22_MARK, PORT206_FN4),
+	PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
+	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
+	PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
+	PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
+	PINMUX_DATA(D23_MARK, PORT207_FN5),
+	PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
+	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
+	PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
+	PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
+	PINMUX_DATA(D24_MARK, PORT208_FN5),
+	PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
+	PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
+	PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
+	PINMUX_DATA(D25_MARK, PORT209_FN4),
+	PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
+	PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
+	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
+	PINMUX_DATA(D26_MARK, PORT210_FN4),
+	PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
+	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
+	PINMUX_DATA(D27_MARK, PORT211_FN3),
+	PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
+	PINMUX_DATA(D28_MARK, PORT212_FN4),
+	PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
+	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
+	PINMUX_DATA(D29_MARK, PORT213_FN4),
+	PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
+	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
+	PINMUX_DATA(D30_MARK, PORT214_FN4),
+	PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
+	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
+	PINMUX_DATA(D31_MARK, PORT215_FN4),
+	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
+	PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
+	PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
+	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
+	PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
+	PINMUX_DATA(DACK2_MARK, PORT217_FN2),
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
+	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
+	PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
+	PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
+	PINMUX_DATA(DACK3_MARK, PORT218_FN4),
+	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+	PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
+	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
+	PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
+	PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
+	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
+	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+	PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
+	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
+	PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
+	PINMUX_DATA(PWEN_MARK, PORT221_FN3),
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
+	PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
+	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
+	PINMUX_DATA(DACK1_MARK, PORT222_FN3),
+	PINMUX_DATA(OVCN_MARK, PORT222_FN4),
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
+	PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
+	PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
+	PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
+	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
+	PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
+	PINMUX_DATA(IDIN_MARK, PORT227_FN2),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
+	PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
+	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
+	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
+	PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
+	PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
+	PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
+	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
+	PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
+	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
+	PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
+	PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
+	PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
+	PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
+	PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
+	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
+	PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
+	PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
+	PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
+	PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
+	PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
+	PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
+
+	/* 55-5 (FN) */
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
+	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
+	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
+	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
+	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
+	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
+	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
+	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
+	PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
+	PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
+	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
+	PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
+	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
+	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
+	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
+	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
+	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
+	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
+	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
+	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
+	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
+	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+	PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
+	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+	PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
+	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+	PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
+	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+	PINMUX_DATA(TDI2_MARK, PORT254_FN2),
+	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+	PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
+	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+	PINMUX_DATA(TRST2_MARK, PORT256_FN2),
+	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+	PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
+	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+	PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
+	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
+	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+	PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
+	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
+	PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
+	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+	PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
+	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
+	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
+	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+	PINMUX_DATA(TDI3_MARK, PORT261_FN4),
+	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
+	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
+	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+	PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
+	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+	PINMUX_DATA(TRST3_MARK, PORT263_FN2),
+	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* 55-1 -> 55-5 (GPIO) */
+	GPIO_PORT_265(),
+
+	/* Special Pull-up / Pull-down Functions */
+	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
+	GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
+	GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
+	GPIO_FN(PORT72_KEYIN6_PU),
+
+	/* 55-1 (FN) */
+	GPIO_FN(VBUS_0),
+	GPIO_FN(CPORT0),
+	GPIO_FN(CPORT1),
+	GPIO_FN(CPORT2),
+	GPIO_FN(CPORT3),
+	GPIO_FN(CPORT4),
+	GPIO_FN(CPORT5),
+	GPIO_FN(CPORT6),
+	GPIO_FN(CPORT7),
+	GPIO_FN(CPORT8),
+	GPIO_FN(CPORT9),
+	GPIO_FN(CPORT10),
+	GPIO_FN(CPORT11), GPIO_FN(SIN2),
+	GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+	GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
+	GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+	GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
+	GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
+	GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
+	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
+	GPIO_FN(CPORT19_MPORT1),
+	GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
+	GPIO_FN(CPORT21), GPIO_FN(STATUS0),
+	GPIO_FN(CPORT22), GPIO_FN(STATUS1),
+	GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+	GPIO_FN(B_SYNLD1),
+	GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
+	GPIO_FN(XMAINPS),
+	GPIO_FN(XDIVPS),
+	GPIO_FN(XIDRST),
+	GPIO_FN(IDCLK), GPIO_FN(IC_DP),
+	GPIO_FN(IDIO), GPIO_FN(IC_DM),
+	GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
+	GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+	GPIO_FN(PCMCLKO),
+	GPIO_FN(SYNC8KO),
+
+	/* 55-2 (FN) */
+	GPIO_FN(DNPCM_A),
+	GPIO_FN(UPPCM_A),
+	GPIO_FN(VACK),
+	GPIO_FN(XTALB1L),
+	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
+	GPIO_FN(GPS_IM),
+	GPIO_FN(GPS_IS),
+	GPIO_FN(GPS_QM),
+	GPIO_FN(GPS_QS),
+	GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
+	GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
+	GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
+	GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
+	GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
+	GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
+	GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
+	GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
+	GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
+	GPIO_FN(FMSIIBT),
+	GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
+	GPIO_FN(A0_EA0), GPIO_FN(BS),
+	GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
+	GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
+	GPIO_FN(TPU0TO1),
+	GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
+	GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
+	GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
+	GPIO_FN(D0_ED0_NAF0),
+	GPIO_FN(D1_ED1_NAF1),
+	GPIO_FN(D2_ED2_NAF2),
+	GPIO_FN(D3_ED3_NAF3),
+	GPIO_FN(D4_ED4_NAF4),
+	GPIO_FN(D5_ED5_NAF5),
+	GPIO_FN(D6_ED6_NAF6),
+	GPIO_FN(D7_ED7_NAF7),
+	GPIO_FN(D8_ED8_NAF8),
+	GPIO_FN(D9_ED9_NAF9),
+	GPIO_FN(D10_ED10_NAF10),
+	GPIO_FN(D11_ED11_NAF11),
+	GPIO_FN(D12_ED12_NAF12),
+	GPIO_FN(D13_ED13_NAF13),
+	GPIO_FN(D14_ED14_NAF14),
+	GPIO_FN(D15_ED15_NAF15),
+	GPIO_FN(CS4),
+	GPIO_FN(CS5A), GPIO_FN(FMSICK),
+
+	/* 55-3 (FN) */
+	GPIO_FN(CS5B), GPIO_FN(FCE1),
+	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
+	GPIO_FN(FCE0),
+	GPIO_FN(WAIT), GPIO_FN(DREQ0),
+	GPIO_FN(RD_XRD),
+	GPIO_FN(WE0_XWR0_FWE),
+	GPIO_FN(WE1_XWR1),
+	GPIO_FN(FRB),
+	GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT),
+	GPIO_FN(NBRST),
+	GPIO_FN(GPS_EPPSIN),
+	GPIO_FN(LATCHPULSE),
+	GPIO_FN(LTESIGNAL),
+	GPIO_FN(LEGACYSTATE),
+	GPIO_FN(TCKON),
+	GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
+	GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
+	GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
+	GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
+	GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
+	GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
+	GPIO_FN(PORT133_MSIOF2_TSYNC),
+	GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
+	GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
+	GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
+	GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
+	GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
+	GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
+	GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
+	GPIO_FN(PORT140_FSIAOBT),
+	GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
+	GPIO_FN(PORT141_FSIAOSLD),
+	GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
+	GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
+	GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
+	GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
+	GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
+	GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
+	GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
+	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
+	GPIO_FN(MFG0_IN2),
+	GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
+	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
+	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
+
+	/* 55-4 (FN) */
+	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+	GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
+	GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
+	GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
+	GPIO_FN(MFG3_IN2),
+	GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
+	GPIO_FN(MFG3_IN1),
+	GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
+	GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
+	GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
+	GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
+	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
+	GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
+	GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
+	GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
+	GPIO_FN(MFG2_OUT2),
+	GPIO_FN(LCDD6),
+	GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
+	GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
+	GPIO_FN(D16),
+	GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
+	GPIO_FN(D17),
+	GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
+	GPIO_FN(D18),
+	GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
+	GPIO_FN(D19),
+	GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
+	GPIO_FN(D20),
+	GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
+	GPIO_FN(D21),
+	GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
+	GPIO_FN(D22),
+	GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
+	GPIO_FN(VIO_DR7), GPIO_FN(D23),
+	GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
+	GPIO_FN(VIO_VDR), GPIO_FN(D24),
+	GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
+	GPIO_FN(D25),
+	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
+	GPIO_FN(D26),
+	GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
+	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+	GPIO_FN(D28),
+	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+	GPIO_FN(D29),
+	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
+	GPIO_FN(D30),
+	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
+	GPIO_FN(D31),
+	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
+	GPIO_FN(VIO_CLKR),
+	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
+	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+	GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
+	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
+	GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
+	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
+	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
+	GPIO_FN(MSIOF0L_TXD),
+	GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
+	GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
+	GPIO_FN(PORT226_VIO_CKO2),
+	GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
+	GPIO_FN(SCIFA1_RXD),
+	GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
+	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
+	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
+	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
+	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
+	GPIO_FN(PORT233_FSIACK),
+	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
+	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
+	GPIO_FN(PORT235_FSIAILR),
+	GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
+	GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
+	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+
+	/* 55-5 (FN) */
+	GPIO_FN(MSIOF1_SS2),
+	GPIO_FN(SCIFA6_TXD),
+	GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
+	GPIO_FN(TPU4TO0),
+	GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
+	GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
+	GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
+	GPIO_FN(PORT244_SCIFB_CTS),
+	GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
+	GPIO_FN(PORT245_SCIFB_RTS),
+	GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
+	GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
+	GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
+	GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
+	GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
+	GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
+	GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
+	GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
+	GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
+	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
+	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+	GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
+	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
+	GPIO_FN(TMS3_SWDIO_MC1),
+	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
+	GPIO_FN(TDO3_SWO0_MC1),
+	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
+	GPIO_FN(TDI3),
+	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
+	GPIO_FN(RTCK3_SWO1_MC1),
+	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+	GPIO_FN(RESETOUTS),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)	\
+	0, (out), (in), 0,	\
+		0, 0, 0, 0,	\
+		0, 0, (in_pd), 0,	\
+		0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)	\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
+			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+				PORT##nr##_FN0, PORT##nr##_FN1,	\
+				PORT##nr##_FN2, PORT##nr##_FN3,	\
+				PORT##nr##_FN4, PORT##nr##_FN5,	\
+				PORT##nr##_FN6, PORT##nr##_FN7 }	\
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6050020), /* PORT32CR */
+	PORTCR(33, 0xe6050021), /* PORT33CR */
+	PORTCR(34, 0xe6050022), /* PORT34CR */
+	PORTCR(35, 0xe6050023), /* PORT35CR */
+	PORTCR(36, 0xe6050024), /* PORT36CR */
+	PORTCR(37, 0xe6050025), /* PORT37CR */
+	PORTCR(38, 0xe6050026), /* PORT38CR */
+	PORTCR(39, 0xe6050027), /* PORT39CR */
+
+	PORTCR(40, 0xe6050028), /* PORT40CR */
+	PORTCR(41, 0xe6050029), /* PORT41CR */
+	PORTCR(42, 0xe605002a), /* PORT42CR */
+	PORTCR(43, 0xe605002b), /* PORT43CR */
+	PORTCR(44, 0xe605002c), /* PORT44CR */
+	PORTCR(45, 0xe605002d), /* PORT45CR */
+	PORTCR(46, 0xe605002e), /* PORT46CR */
+	PORTCR(47, 0xe605002f), /* PORT47CR */
+	PORTCR(48, 0xe6050030), /* PORT48CR */
+	PORTCR(49, 0xe6050031), /* PORT49CR */
+
+	PORTCR(50, 0xe6050032), /* PORT50CR */
+	PORTCR(51, 0xe6050033), /* PORT51CR */
+	PORTCR(52, 0xe6050034), /* PORT52CR */
+	PORTCR(53, 0xe6050035), /* PORT53CR */
+	PORTCR(54, 0xe6050036), /* PORT54CR */
+	PORTCR(55, 0xe6050037), /* PORT55CR */
+	PORTCR(56, 0xe6050038), /* PORT56CR */
+	PORTCR(57, 0xe6050039), /* PORT57CR */
+	PORTCR(58, 0xe605003a), /* PORT58CR */
+	PORTCR(59, 0xe605003b), /* PORT59CR */
+
+	PORTCR(60, 0xe605003c), /* PORT60CR */
+	PORTCR(61, 0xe605003d), /* PORT61CR */
+	PORTCR(62, 0xe605003e), /* PORT62CR */
+	PORTCR(63, 0xe605003f), /* PORT63CR */
+	PORTCR(64, 0xe6050040), /* PORT64CR */
+	PORTCR(65, 0xe6050041), /* PORT65CR */
+	PORTCR(66, 0xe6050042), /* PORT66CR */
+	PORTCR(67, 0xe6050043), /* PORT67CR */
+	PORTCR(68, 0xe6050044), /* PORT68CR */
+	PORTCR(69, 0xe6050045), /* PORT69CR */
+
+	PORTCR(70, 0xe6050046), /* PORT70CR */
+	PORTCR(71, 0xe6050047), /* PORT71CR */
+	PORTCR(72, 0xe6050048), /* PORT72CR */
+	PORTCR(73, 0xe6050049), /* PORT73CR */
+	PORTCR(74, 0xe605004a), /* PORT74CR */
+	PORTCR(75, 0xe605004b), /* PORT75CR */
+	PORTCR(76, 0xe605004c), /* PORT76CR */
+	PORTCR(77, 0xe605004d), /* PORT77CR */
+	PORTCR(78, 0xe605004e), /* PORT78CR */
+	PORTCR(79, 0xe605004f), /* PORT79CR */
+
+	PORTCR(80, 0xe6050050), /* PORT80CR */
+	PORTCR(81, 0xe6050051), /* PORT81CR */
+	PORTCR(82, 0xe6050052), /* PORT82CR */
+	PORTCR(83, 0xe6050053), /* PORT83CR */
+	PORTCR(84, 0xe6050054), /* PORT84CR */
+	PORTCR(85, 0xe6050055), /* PORT85CR */
+	PORTCR(86, 0xe6050056), /* PORT86CR */
+	PORTCR(87, 0xe6050057), /* PORT87CR */
+	PORTCR(88, 0xe6050058), /* PORT88CR */
+	PORTCR(89, 0xe6050059), /* PORT89CR */
+
+	PORTCR(90, 0xe605005a), /* PORT90CR */
+	PORTCR(91, 0xe605005b), /* PORT91CR */
+	PORTCR(92, 0xe605005c), /* PORT92CR */
+	PORTCR(93, 0xe605005d), /* PORT93CR */
+	PORTCR(94, 0xe605005e), /* PORT94CR */
+	PORTCR(95, 0xe605005f), /* PORT95CR */
+	PORTCR(96, 0xe6050060), /* PORT96CR */
+	PORTCR(97, 0xe6050061), /* PORT97CR */
+	PORTCR(98, 0xe6050062), /* PORT98CR */
+	PORTCR(99, 0xe6050063), /* PORT99CR */
+
+	PORTCR(100, 0xe6050064), /* PORT100CR */
+	PORTCR(101, 0xe6050065), /* PORT101CR */
+	PORTCR(102, 0xe6050066), /* PORT102CR */
+	PORTCR(103, 0xe6050067), /* PORT103CR */
+	PORTCR(104, 0xe6050068), /* PORT104CR */
+	PORTCR(105, 0xe6050069), /* PORT105CR */
+	PORTCR(106, 0xe605006a), /* PORT106CR */
+	PORTCR(107, 0xe605006b), /* PORT107CR */
+	PORTCR(108, 0xe605006c), /* PORT108CR */
+	PORTCR(109, 0xe605006d), /* PORT109CR */
+
+	PORTCR(110, 0xe605006e), /* PORT110CR */
+	PORTCR(111, 0xe605006f), /* PORT111CR */
+	PORTCR(112, 0xe6050070), /* PORT112CR */
+	PORTCR(113, 0xe6050071), /* PORT113CR */
+	PORTCR(114, 0xe6050072), /* PORT114CR */
+	PORTCR(115, 0xe6050073), /* PORT115CR */
+	PORTCR(116, 0xe6050074), /* PORT116CR */
+	PORTCR(117, 0xe6050075), /* PORT117CR */
+	PORTCR(118, 0xe6050076), /* PORT118CR */
+
+	PORTCR(128, 0xe6051080), /* PORT128CR */
+	PORTCR(129, 0xe6051081), /* PORT129CR */
+
+	PORTCR(130, 0xe6051082), /* PORT130CR */
+	PORTCR(131, 0xe6051083), /* PORT131CR */
+	PORTCR(132, 0xe6051084), /* PORT132CR */
+	PORTCR(133, 0xe6051085), /* PORT133CR */
+	PORTCR(134, 0xe6051086), /* PORT134CR */
+	PORTCR(135, 0xe6051087), /* PORT135CR */
+	PORTCR(136, 0xe6051088), /* PORT136CR */
+	PORTCR(137, 0xe6051089), /* PORT137CR */
+	PORTCR(138, 0xe605108a), /* PORT138CR */
+	PORTCR(139, 0xe605108b), /* PORT139CR */
+
+	PORTCR(140, 0xe605108c), /* PORT140CR */
+	PORTCR(141, 0xe605108d), /* PORT141CR */
+	PORTCR(142, 0xe605108e), /* PORT142CR */
+	PORTCR(143, 0xe605108f), /* PORT143CR */
+	PORTCR(144, 0xe6051090), /* PORT144CR */
+	PORTCR(145, 0xe6051091), /* PORT145CR */
+	PORTCR(146, 0xe6051092), /* PORT146CR */
+	PORTCR(147, 0xe6051093), /* PORT147CR */
+	PORTCR(148, 0xe6051094), /* PORT148CR */
+	PORTCR(149, 0xe6051095), /* PORT149CR */
+
+	PORTCR(150, 0xe6051096), /* PORT150CR */
+	PORTCR(151, 0xe6051097), /* PORT151CR */
+	PORTCR(152, 0xe6051098), /* PORT152CR */
+	PORTCR(153, 0xe6051099), /* PORT153CR */
+	PORTCR(154, 0xe605109a), /* PORT154CR */
+	PORTCR(155, 0xe605109b), /* PORT155CR */
+	PORTCR(156, 0xe605109c), /* PORT156CR */
+	PORTCR(157, 0xe605109d), /* PORT157CR */
+	PORTCR(158, 0xe605109e), /* PORT158CR */
+	PORTCR(159, 0xe605109f), /* PORT159CR */
+
+	PORTCR(160, 0xe60510a0), /* PORT160CR */
+	PORTCR(161, 0xe60510a1), /* PORT161CR */
+	PORTCR(162, 0xe60510a2), /* PORT162CR */
+	PORTCR(163, 0xe60510a3), /* PORT163CR */
+	PORTCR(164, 0xe60510a4), /* PORT164CR */
+
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60520e0), /* PORT224CR */
+	PORTCR(225, 0xe60520e1), /* PORT225CR */
+	PORTCR(226, 0xe60520e2), /* PORT226CR */
+	PORTCR(227, 0xe60520e3), /* PORT227CR */
+	PORTCR(228, 0xe60520e4), /* PORT228CR */
+	PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60520e6), /* PORT230CR */
+	PORTCR(231, 0xe60520e7), /* PORT231CR */
+	PORTCR(232, 0xe60520e8), /* PORT232CR */
+	PORTCR(233, 0xe60520e9), /* PORT233CR */
+	PORTCR(234, 0xe60520ea), /* PORT234CR */
+	PORTCR(235, 0xe60520eb), /* PORT235CR */
+	PORTCR(236, 0xe60520ec), /* PORT236CR */
+	PORTCR(237, 0xe60520ed), /* PORT237CR */
+	PORTCR(238, 0xe60520ee), /* PORT238CR */
+	PORTCR(239, 0xe60520ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60520f0), /* PORT240CR */
+	PORTCR(241, 0xe60520f1), /* PORT241CR */
+	PORTCR(242, 0xe60520f2), /* PORT242CR */
+	PORTCR(243, 0xe60520f3), /* PORT243CR */
+	PORTCR(244, 0xe60520f4), /* PORT244CR */
+	PORTCR(245, 0xe60520f5), /* PORT245CR */
+	PORTCR(246, 0xe60520f6), /* PORT246CR */
+	PORTCR(247, 0xe60520f7), /* PORT247CR */
+	PORTCR(248, 0xe60520f8), /* PORT248CR */
+	PORTCR(249, 0xe60520f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60520fa), /* PORT250CR */
+	PORTCR(251, 0xe60520fb), /* PORT251CR */
+	PORTCR(252, 0xe60520fc), /* PORT252CR */
+	PORTCR(253, 0xe60520fd), /* PORT253CR */
+	PORTCR(254, 0xe60520fe), /* PORT254CR */
+	PORTCR(255, 0xe60520ff), /* PORT255CR */
+	PORTCR(256, 0xe6052100), /* PORT256CR */
+	PORTCR(257, 0xe6052101), /* PORT257CR */
+	PORTCR(258, 0xe6052102), /* PORT258CR */
+	PORTCR(259, 0xe6052103), /* PORT259CR */
+
+	PORTCR(260, 0xe6052104), /* PORT260CR */
+	PORTCR(261, 0xe6052105), /* PORT261CR */
+	PORTCR(262, 0xe6052106), /* PORT262CR */
+	PORTCR(263, 0xe6052107), /* PORT263CR */
+	PORTCR(264, 0xe6052108), /* PORT264CR */
+
+	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
+			MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
+			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
+			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT264_DATA,
+			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7377_pinmux_info = {
+	.name = "sh7377_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_RESETOUTS,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7377_pinmux_init(void)
+{
+	register_pinmux(&sh7377_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
new file mode 100644
index 0000000..eca9071
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -0,0 +1,198 @@
+/*
+ * sh7367 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7367_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7367_add_standard_devices(void)
+{
+	platform_add_devices(sh7367_early_devices,
+			     ARRAY_SIZE(sh7367_early_devices));
+}
+
+#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2_CMT1 (1 << 29)
+
+void __init sh7367_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
+
+	early_platform_add_devices(sh7367_early_devices,
+				   ARRAY_SIZE(sh7367_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
new file mode 100644
index 0000000..1d11532
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -0,0 +1,199 @@
+/*
+ * sh7372 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7372_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&cmt10_device,
+};
+
+void __init sh7372_add_standard_devices(void)
+{
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7372_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
new file mode 100644
index 0000000..60e3777
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -0,0 +1,215 @@
+/*
+ * sh7377 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs		= { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6cc0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 196, 196, 196, 196 },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIF,
+	.irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clk = "r_clk",
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 72,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7377_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&cmt10_device,
+};
+
+void __init sh7377_add_standard_devices(void)
+{
+	platform_add_devices(sh7377_early_devices,
+			    ARRAY_SIZE(sh7377_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7377_add_early_devices(void)
+{
+	/* enable clock to CMT1 */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+	early_platform_add_devices(sh7377_early_devices,
+				   ARRAY_SIZE(sh7377_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
new file mode 100644
index 0000000..895794b
--- /dev/null
+++ b/arch/arm/mach-shmobile/timer.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/mach/time.h>
+
+static void __init shmobile_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+static void __init shmobile_timer_init(void)
+{
+	late_time_init = shmobile_late_time_init;
+}
+
+struct sys_timer shmobile_timer = {
+	.init		= shmobile_timer_init,
+};
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
new file mode 100644
index 0000000..20d1317
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -0,0 +1,33 @@
+#
+# SPEAr3XX Machine configuration file
+#
+
+if ARCH_SPEAR3XX
+
+choice
+	prompt "SPEAr3XX Family"
+	default MACH_SPEAR300
+
+config MACH_SPEAR300
+	bool "SPEAr300"
+	help
+	  Supports ST SPEAr300 Machine
+
+config MACH_SPEAR310
+	bool "SPEAr310"
+	help
+	  Supports ST SPEAr310 Machine
+
+config MACH_SPEAR320
+	bool "SPEAr320"
+	help
+	  Supports ST SPEAr320 Machine
+
+endchoice
+
+# Adding SPEAr3XX machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig300"
+source "arch/arm/mach-spear3xx/Kconfig310"
+source "arch/arm/mach-spear3xx/Kconfig320"
+
+endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Kconfig300 b/arch/arm/mach-spear3xx/Kconfig300
new file mode 100644
index 0000000..c519a05
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig300
@@ -0,0 +1,17 @@
+#
+# SPEAr300 machine configuration file
+#
+
+if MACH_SPEAR300
+
+choice
+	prompt "SPEAr300 Boards"
+	default BOARD_SPEAR300_EVB
+
+config BOARD_SPEAR300_EVB
+	bool "SPEAr300 Evaluation Board"
+	help
+	  Supports ST SPEAr300 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR300
diff --git a/arch/arm/mach-spear3xx/Kconfig310 b/arch/arm/mach-spear3xx/Kconfig310
new file mode 100644
index 0000000..60e7442
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig310
@@ -0,0 +1,17 @@
+#
+# SPEAr310 machine configuration file
+#
+
+if MACH_SPEAR310
+
+choice
+	prompt "SPEAr310 Boards"
+	default BOARD_SPEAR310_EVB
+
+config BOARD_SPEAR310_EVB
+	bool "SPEAr310 Evaluation Board"
+	help
+	  Supports ST SPEAr310 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR310
diff --git a/arch/arm/mach-spear3xx/Kconfig320 b/arch/arm/mach-spear3xx/Kconfig320
new file mode 100644
index 0000000..1c1d438
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Kconfig320
@@ -0,0 +1,17 @@
+#
+# SPEAr320 machine configuration file
+#
+
+if MACH_SPEAR320
+
+choice
+	prompt "SPEAr320 Boards"
+	default BOARD_SPEAR320_EVB
+
+config BOARD_SPEAR320_EVB
+	bool "SPEAr320 Evaluation Board"
+	help
+	  Supports ST SPEAr320 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR320
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
new file mode 100644
index 0000000..b248624
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -0,0 +1,26 @@
+#
+# Makefile for SPEAr3XX machine series
+#
+
+# common files
+obj-y	+= spear3xx.o clock.o
+
+# spear300 specific files
+obj-$(CONFIG_MACH_SPEAR300) += spear300.o
+
+# spear300 boards files
+obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
+
+
+# spear310 specific files
+obj-$(CONFIG_MACH_SPEAR310) += spear310.o
+
+# spear310 boards files
+obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
+
+
+# spear320 specific files
+obj-$(CONFIG_MACH_SPEAR320) += spear320.o
+
+# spear320 boards files
+obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
new file mode 100644
index 0000000..7a1f3c0
--- /dev/null
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
new file mode 100644
index 0000000..39f6ccf
--- /dev/null
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -0,0 +1,389 @@
+/*
+ * arch/arm/mach-spear3xx/clock.c
+ *
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 32000,
+};
+
+/* 24 MHz oscillator clock */
+static struct clk osc_24m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 24000000,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+	.pclk = &osc_32k_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = RTC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from 24 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+	.mode_reg = PLL1_CTR,
+	.cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+	.pclk = &osc_24m_clk,
+	.en_reg = PLL1_CTR,
+	.en_reg_bit = PLL_ENABLE,
+	.recalc = &pll1_clk_recalc,
+	.private_data = &pll1_config,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.rate = 48000000,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &follow_parent,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &ahb_config,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+	.synth_reg = UART_CLK_SYNT,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+	.pclk_info = uart_pclk_info,
+	.pclk_count = ARRAY_SIZE(uart_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart clock */
+static struct clk uart_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+	.synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+	.pclk_info = firda_pclk_info,
+	.pclk_count = ARRAY_SIZE(firda_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FIRDA_CLK_ENB,
+	.pclk_sel = &firda_pclk_sel,
+	.pclk_sel_shift = FIRDA_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &firda_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+	.pclk_info = gpt_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0 configurations */
+static struct aux_clk_config gpt0_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT0_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_config,
+};
+
+/* gpt1 configurations */
+static struct aux_clk_config gpt1_config = {
+	.synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT1_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT1_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt1_config,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+	.synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT2_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT2_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt2_config,
+};
+
+/* clock derived from pll3 clk */
+/* usbh clock */
+static struct clk usbh_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBD_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll3_48m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &apb_config,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = I2C_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = DMA_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = JPEG_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GMAC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SMI_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* c3 clock */
+static struct clk c3_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = C3_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = ADC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio clock */
+static struct clk gpio_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* array of all spear 3xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+	/* root clks */
+	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
+	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
+	/* clock derived from 32 KHz osc clk */
+	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	/* clock derived from 24 MHz osc clk */
+	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
+	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
+	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	/* clock derived from pll1 clk */
+	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
+	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .dev_id = "uart",		.clk = &uart_clk},
+	{ .dev_id = "firda",		.clk = &firda_clk},
+	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
+	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
+	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	/* clock derived from pll3 clk */
+	{ .dev_id = "usbh",		.clk = &usbh_clk},
+	{ .dev_id = "usbd",		.clk = &usbd_clk},
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	/* clock derived from ahb clk */
+	{ .con_id = "apb_clk",		.clk = &apb_clk},
+	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "dma",		.clk = &dma_clk},
+	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
+	{ .dev_id = "gmac",		.clk = &gmac_clk},
+	{ .dev_id = "smi",		.clk = &smi_clk},
+	{ .dev_id = "c3",		.clk = &c3_clk},
+	/* clock derived from apb clk */
+	{ .dev_id = "adc",		.clk = &adc_clk},
+	{ .dev_id = "ssp",		.clk = &ssp_clk},
+	{ .dev_id = "gpio",		.clk = &gpio_clk},
+};
+
+void __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	recalc_root_clocks();
+}
diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h
new file mode 100644
index 0000000..a3d0733
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..590519f
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..947625d
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =VA_SPEAR3XX_ML1_VIC_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		teq	\irqstat, #0
+		beq	1001f				@ this will set/reset
+							@ zero register
+		/*
+		 * Following code will find bit position of least significang
+		 * bit set in irqstat, using following equation
+		 * least significant bit set in n = (n & ~(n-1))
+		 */
+		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
+		mvn	\tmp, \tmp			@ tmp = ~tmp
+		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
+		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+		clz	\tmp, \irqstat			@ tmp = leading zeros
+		rsb	\irqnr, \tmp, #0x1F		@ irqnr = 32 - tmp - 1
+
+1001:		/* EQ will be set if no irqs pending */
+		.endm
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
new file mode 100644
index 0000000..af7e02c
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -0,0 +1,205 @@
+/*
+ * arch/arm/mach-spear3xx/generic.h
+ *
+ * SPEAr3XX machine family generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <plat/padmux.h>
+
+/* spear3xx declarations */
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
+
+/* Add spear3xx family device structure declarations here */
+extern struct amba_device gpio_device;
+extern struct amba_device uart_device;
+extern struct sys_timer spear_sys_timer;
+
+/* Add spear3xx family function declarations here */
+void __init clk_init(void);
+void __init spear3xx_map_io(void);
+void __init spear3xx_init_irq(void);
+void __init spear3xx_init(void);
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
+
+/* pad mux declarations */
+#define PMX_FIRDA_MASK		(1 << 14)
+#define PMX_I2C_MASK		(1 << 13)
+#define PMX_SSP_CS_MASK		(1 << 12)
+#define PMX_SSP_MASK		(1 << 11)
+#define PMX_MII_MASK		(1 << 10)
+#define PMX_GPIO_PIN0_MASK	(1 << 9)
+#define PMX_GPIO_PIN1_MASK	(1 << 8)
+#define PMX_GPIO_PIN2_MASK	(1 << 7)
+#define PMX_GPIO_PIN3_MASK	(1 << 6)
+#define PMX_GPIO_PIN4_MASK	(1 << 5)
+#define PMX_GPIO_PIN5_MASK	(1 << 4)
+#define PMX_UART0_MODEM_MASK	(1 << 3)
+#define PMX_UART0_MASK		(1 << 2)
+#define PMX_TIMER_3_4_MASK	(1 << 1)
+#define PMX_TIMER_1_2_MASK	(1 << 0)
+
+/* pad mux devices */
+extern struct pmx_dev pmx_firda;
+extern struct pmx_dev pmx_i2c;
+extern struct pmx_dev pmx_ssp_cs;
+extern struct pmx_dev pmx_ssp;
+extern struct pmx_dev pmx_mii;
+extern struct pmx_dev pmx_gpio_pin0;
+extern struct pmx_dev pmx_gpio_pin1;
+extern struct pmx_dev pmx_gpio_pin2;
+extern struct pmx_dev pmx_gpio_pin3;
+extern struct pmx_dev pmx_gpio_pin4;
+extern struct pmx_dev pmx_gpio_pin5;
+extern struct pmx_dev pmx_uart0_modem;
+extern struct pmx_dev pmx_uart0;
+extern struct pmx_dev pmx_timer_3_4;
+extern struct pmx_dev pmx_timer_1_2;
+
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* padmux plgpio devices */
+extern struct pmx_dev pmx_plgpio_0_1;
+extern struct pmx_dev pmx_plgpio_2_3;
+extern struct pmx_dev pmx_plgpio_4_5;
+extern struct pmx_dev pmx_plgpio_6_9;
+extern struct pmx_dev pmx_plgpio_10_27;
+extern struct pmx_dev pmx_plgpio_28;
+extern struct pmx_dev pmx_plgpio_29;
+extern struct pmx_dev pmx_plgpio_30;
+extern struct pmx_dev pmx_plgpio_31;
+extern struct pmx_dev pmx_plgpio_32;
+extern struct pmx_dev pmx_plgpio_33;
+extern struct pmx_dev pmx_plgpio_34_36;
+extern struct pmx_dev pmx_plgpio_37_42;
+extern struct pmx_dev pmx_plgpio_43_44_47_48;
+extern struct pmx_dev pmx_plgpio_45_46_49_50;
+#endif
+
+extern struct pmx_driver pmx_driver;
+
+/* spear300 declarations */
+#ifdef CONFIG_MACH_SPEAR300
+/* Add spear300 machine device structure declarations here */
+extern struct amba_device gpio1_device;
+
+/* pad mux modes */
+extern struct pmx_mode nand_mode;
+extern struct pmx_mode nor_mode;
+extern struct pmx_mode photo_frame_mode;
+extern struct pmx_mode lend_ip_phone_mode;
+extern struct pmx_mode hend_ip_phone_mode;
+extern struct pmx_mode lend_wifi_phone_mode;
+extern struct pmx_mode hend_wifi_phone_mode;
+extern struct pmx_mode ata_pabx_wi2s_mode;
+extern struct pmx_mode ata_pabx_i2s_mode;
+extern struct pmx_mode caml_lcdw_mode;
+extern struct pmx_mode camu_lcd_mode;
+extern struct pmx_mode camu_wlcd_mode;
+extern struct pmx_mode caml_lcd_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_fsmc_2_chips;
+extern struct pmx_dev pmx_fsmc_4_chips;
+extern struct pmx_dev pmx_keyboard;
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_telecom_gpio;
+extern struct pmx_dev pmx_telecom_tdm;
+extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
+extern struct pmx_dev pmx_telecom_camera;
+extern struct pmx_dev pmx_telecom_dac;
+extern struct pmx_dev pmx_telecom_i2s;
+extern struct pmx_dev pmx_telecom_boot_pins;
+extern struct pmx_dev pmx_telecom_sdio_4bit;
+extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_gpio1;
+
+void spear300_pmx_init(void);
+
+/* Add spear300 machine function declarations here */
+void __init spear300_init(void);
+
+#endif /* CONFIG_MACH_SPEAR300 */
+
+/* spear310 declarations */
+#ifdef CONFIG_MACH_SPEAR310
+/* Add spear310 machine device structure declarations here */
+
+/* pad mux devices */
+extern struct pmx_dev pmx_emi_cs_0_1_4_5;
+extern struct pmx_dev pmx_emi_cs_2_3;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_uart3_4_5;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_rs485_0_1;
+extern struct pmx_dev pmx_tdm0;
+
+void spear310_pmx_init(void);
+
+/* Add spear310 machine function declarations here */
+void __init spear310_init(void);
+
+#endif /* CONFIG_MACH_SPEAR310 */
+
+/* spear320 declarations */
+#ifdef CONFIG_MACH_SPEAR320
+/* Add spear320 machine device structure declarations here */
+
+/* pad mux modes */
+extern struct pmx_mode auto_net_smii_mode;
+extern struct pmx_mode auto_net_mii_mode;
+extern struct pmx_mode auto_exp_mode;
+extern struct pmx_mode small_printers_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_emi;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_spp;
+extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_i2s;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart1_modem;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_touchscreen;
+extern struct pmx_dev pmx_can;
+extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_pwm0;
+extern struct pmx_dev pmx_pwm1;
+extern struct pmx_dev pmx_pwm2;
+extern struct pmx_dev pmx_pwm3;
+extern struct pmx_dev pmx_ssp1;
+extern struct pmx_dev pmx_ssp2;
+extern struct pmx_dev pmx_mii1;
+extern struct pmx_dev pmx_smii0;
+extern struct pmx_dev pmx_smii1;
+extern struct pmx_dev pmx_i2c1;
+
+void spear320_pmx_init(void);
+
+/* Add spear320 machine function declarations here */
+void __init spear320_init(void);
+
+#endif /* CONFIG_MACH_SPEAR320 */
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h
new file mode 100644
index 0000000..451b208
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
new file mode 100644
index 0000000..4a86e6a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/io.h b/arch/arm/mach-spear3xx/include/mach/io.h
new file mode 100644
index 0000000..30cff8a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif /* __MACH_IO_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
new file mode 100644
index 0000000..7f940b8
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+/* SPEAr3xx IRQ definitions */
+#define IRQ_HW_ACCEL_MOD_0			0
+#define IRQ_INTRCOMM_RAS_ARM			1
+#define IRQ_CPU_GPT1_1				2
+#define IRQ_CPU_GPT1_2				3
+#define IRQ_BASIC_GPT1_1			4
+#define IRQ_BASIC_GPT1_2			5
+#define IRQ_BASIC_GPT2_1			6
+#define IRQ_BASIC_GPT2_2			7
+#define IRQ_BASIC_DMA				8
+#define IRQ_BASIC_SMI				9
+#define IRQ_BASIC_RTC				10
+#define IRQ_BASIC_GPIO				11
+#define IRQ_BASIC_WDT				12
+#define IRQ_DDR_CONTROLLER			13
+#define IRQ_SYS_ERROR				14
+#define IRQ_WAKEUP_RCV				15
+#define IRQ_JPEG				16
+#define IRQ_IRDA				17
+#define IRQ_ADC					18
+#define IRQ_UART				19
+#define IRQ_SSP					20
+#define IRQ_I2C					21
+#define IRQ_MAC_1				22
+#define IRQ_MAC_2				23
+#define IRQ_USB_DEV				24
+#define IRQ_USB_H_OHCI_0			25
+#define IRQ_USB_H_EHCI_0			26
+#define IRQ_USB_H_EHCI_1			IRQ_USB_H_EHCI_0
+#define IRQ_USB_H_OHCI_1			27
+#define IRQ_GEN_RAS_1				28
+#define IRQ_GEN_RAS_2				29
+#define IRQ_GEN_RAS_3				30
+#define IRQ_HW_ACCEL_MOD_1			31
+#define IRQ_VIC_END				32
+
+#define VIRQ_START				IRQ_VIC_END
+
+/* SPEAr300 Virtual irq definitions */
+#ifdef CONFIG_MACH_SPEAR300
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_IT_PERS_S				(VIRQ_START + 0)
+#define VIRQ_IT_CHANGE_S			(VIRQ_START + 1)
+#define VIRQ_I2S				(VIRQ_START + 2)
+#define VIRQ_TDM				(VIRQ_START + 3)
+#define VIRQ_CAMERA_L				(VIRQ_START + 4)
+#define VIRQ_CAMERA_F				(VIRQ_START + 5)
+#define VIRQ_CAMERA_V				(VIRQ_START + 6)
+#define VIRQ_KEYBOARD				(VIRQ_START + 7)
+#define VIRQ_GPIO1				(VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define IRQ_CLCD				IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define IRQ_SDIO				IRQ_INTRCOMM_RAS_ARM
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 9)
+#define SPEAR_GPIO1_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END			(SPEAR_GPIO1_INT_BASE + 8)
+
+/* SPEAr310 Virtual irq definitions */
+#elif defined(CONFIG_MACH_SPEAR310)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_SMII0				(VIRQ_START + 0)
+#define VIRQ_SMII1				(VIRQ_START + 1)
+#define VIRQ_SMII2				(VIRQ_START + 2)
+#define VIRQ_SMII3				(VIRQ_START + 3)
+#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 4)
+#define VIRQ_WAKEUP_SMII1			(VIRQ_START + 5)
+#define VIRQ_WAKEUP_SMII2			(VIRQ_START + 6)
+#define VIRQ_WAKEUP_SMII3			(VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define VIRQ_UART1				(VIRQ_START + 8)
+#define VIRQ_UART2				(VIRQ_START + 9)
+#define VIRQ_UART3				(VIRQ_START + 10)
+#define VIRQ_UART4				(VIRQ_START + 11)
+#define VIRQ_UART5				(VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_EMI				(VIRQ_START + 13)
+#define VIRQ_PLGPIO				(VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_TDM_HDLC				(VIRQ_START + 15)
+#define VIRQ_RS485_0				(VIRQ_START + 16)
+#define VIRQ_RS485_1				(VIRQ_START + 17)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 18)
+
+/* SPEAr320 Virtual irq definitions */
+#else
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_EMI				(VIRQ_START + 0)
+#define VIRQ_CLCD				(VIRQ_START + 1)
+#define VIRQ_SPP				(VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define IRQ_SDIO				IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_PLGPIO				(VIRQ_START + 3)
+#define VIRQ_I2S_PLAY				(VIRQ_START + 4)
+#define VIRQ_I2S_REC				(VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_CANU				(VIRQ_START + 6)
+#define VIRQ_CANL				(VIRQ_START + 7)
+#define VIRQ_UART1				(VIRQ_START + 8)
+#define VIRQ_UART2				(VIRQ_START + 9)
+#define VIRQ_SSP1				(VIRQ_START + 10)
+#define VIRQ_SSP2				(VIRQ_START + 11)
+#define VIRQ_SMII0				(VIRQ_START + 12)
+#define VIRQ_MII1_SMII1				(VIRQ_START + 13)
+#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 14)
+#define VIRQ_WAKEUP_MII1_SMII1			(VIRQ_START + 15)
+#define VIRQ_I2C				(VIRQ_START + 16)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 17)
+
+#endif
+
+/* PLGPIO Virtual IRQs */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+#define SPEAR_PLGPIO_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END			(SPEAR_PLGPIO_INT_BASE + 102)
+#endif
+
+#define VIRQ_END				SPEAR_GPIO_INT_END
+#define NR_IRQS					VIRQ_END
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
new file mode 100644
index 0000000..5173522
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
new file mode 100644
index 0000000..38d767a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include <mach/spear.h>
+
+#define MISC_BASE		VA_SPEAR3XX_ICM3_MISC_REG_BASE
+
+#define SOC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR		((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR		((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ		((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD		((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR		((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG		((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG		((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		11
+#define GPT2_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_MASK	0
+#define AUX_CLK_PLL1_MASK	1
+
+#define PERIP1_CLK_ENB		((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB		3
+#define SSP_CLK_ENB		5
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FIRDA_CLK_ENB		10
+#define GPT1_CLK_ENB		11
+#define GPT2_CLK_ENB		12
+#define ADC_CLK_ENB		15
+#define RTC_CLK_ENB		17
+#define GPIO_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH_CLK_ENB		25
+#define C3_CLK_ENB		31
+
+#define SOC_CORE_ID		((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB		((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST		((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST		8
+
+#define SOC_USER_ID		((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST		((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG		((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG		((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG		((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG		((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+
+#define ICM1_ARB_CFG		((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG		((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG		((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG		((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG		((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG		((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG		((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG		((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG		((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG		((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG		((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG	((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG	((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG		((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR		((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR		((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES		((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES		((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES		((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES		((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES		((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR		((unsigned int *)(MISC_BASE + 0x11C))
+
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
new file mode 100644
index 0000000..dcca856
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear.h
+ *
+ * SPEAr3xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR3XX_H
+#define __MACH_SPEAR3XX_H
+
+#include <mach/hardware.h>
+#include <mach/spear300.h>
+#include <mach/spear310.h>
+#include <mach/spear320.h>
+
+#define SPEAR3XX_ML_SDRAM_BASE		0x00000000
+#define SPEAR3XX_ML_SDRAM_SIZE		0x40000000
+
+#define SPEAR3XX_ICM9_BASE		0xC0000000
+#define SPEAR3XX_ICM9_SIZE		0x10000000
+
+/* ICM1 - Low speed connection */
+#define SPEAR3XX_ICM1_2_BASE		0xD0000000
+#define SPEAR3XX_ICM1_2_SIZE		0x10000000
+
+#define SPEAR3XX_ICM1_UART_BASE		0xD0000000
+#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_UART_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_ADC_BASE		0xD0080000
+#define SPEAR3XX_ICM1_ADC_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_SSP_BASE		0xD0100000
+#define SPEAR3XX_ICM1_SSP_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_I2C_BASE		0xD0180000
+#define SPEAR3XX_ICM1_I2C_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_JPEG_BASE		0xD0800000
+#define SPEAR3XX_ICM1_JPEG_SIZE		0x00800000
+
+#define SPEAR3XX_ICM1_IRDA_BASE		0xD1000000
+#define SPEAR3XX_ICM1_IRDA_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_SRAM_BASE		0xD2800000
+#define SPEAR3XX_ICM1_SRAM_SIZE		0x05800000
+
+/* ICM2 - Application Subsystem */
+#define SPEAR3XX_ICM2_HWACCEL0_BASE	0xD8800000
+#define SPEAR3XX_ICM2_HWACCEL0_SIZE	0x00800000
+
+#define SPEAR3XX_ICM2_HWACCEL1_BASE	0xD9000000
+#define SPEAR3XX_ICM2_HWACCEL1_SIZE	0x00800000
+
+/* ICM4 - High Speed Connection */
+#define SPEAR3XX_ICM4_BASE		0xE0000000
+#define SPEAR3XX_ICM4_SIZE		0x08000000
+
+#define SPEAR3XX_ICM4_MII_BASE		0xE0800000
+#define SPEAR3XX_ICM4_MII_SIZE		0x00800000
+
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE	0xE1000000
+#define SPEAR3XX_ICM4_USBD_FIFO_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USBD_CSR_BASE	0xE1100000
+#define SPEAR3XX_ICM4_USBD_CSR_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE	0xE1200000
+#define SPEAR3XX_ICM4_USBD_PLDT_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	0xE1800000
+#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE	0xE1900000
+#define SPEAR3XX_ICM4_USB_OHCI0_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE	0xE2100000
+#define SPEAR3XX_ICM4_USB_OHCI1_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_ARB_BASE	0xE2800000
+#define SPEAR3XX_ICM4_USB_ARB_SIZE	0x00010000
+
+/* ML1 - Multi Layer CPU Subsystem */
+#define SPEAR3XX_ICM3_ML1_2_BASE	0xF0000000
+#define SPEAR3XX_ICM3_ML1_2_SIZE	0x0F000000
+
+#define SPEAR3XX_ML1_TMR_BASE		0xF0000000
+#define SPEAR3XX_ML1_TMR_SIZE		0x00100000
+
+#define SPEAR3XX_ML1_VIC_BASE		0xF1100000
+#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define SPEAR3XX_ML1_VIC_SIZE		0x00100000
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR3XX_ICM3_SMEM_BASE		0xF8000000
+#define SPEAR3XX_ICM3_SMEM_SIZE		0x04000000
+
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE	0xFC000000
+#define SPEAR3XX_ICM3_SMI_CTRL_SIZE	0x00200000
+
+#define SPEAR3XX_ICM3_DMA_BASE		0xFC400000
+#define SPEAR3XX_ICM3_DMA_SIZE		0x00200000
+
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	0xFC600000
+#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE	0x00200000
+
+#define SPEAR3XX_ICM3_TMR0_BASE		0xFC800000
+#define SPEAR3XX_ICM3_TMR0_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_WDT_BASE		0xFC880000
+#define SPEAR3XX_ICM3_WDT_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_RTC_BASE		0xFC900000
+#define SPEAR3XX_ICM3_RTC_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_GPIO_BASE		0xFC980000
+#define SPEAR3XX_ICM3_GPIO_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE	0xFCA00000
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR3XX_ICM3_SYS_CTRL_SIZE	0x00080000
+
+#define SPEAR3XX_ICM3_MISC_REG_BASE	0xFCA80000
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
+#define SPEAR3XX_ICM3_MISC_REG_SIZE	0x00080000
+
+#define SPEAR3XX_ICM3_TMR1_BASE		0xFCB00000
+#define SPEAR3XX_ICM3_TMR1_SIZE		0x00080000
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR3XX_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+
+#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
new file mode 100644
index 0000000..ccaa765
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear300.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear300.h
+ *
+ * SPEAr300 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR300
+
+#ifndef __MACH_SPEAR300_H
+#define __MACH_SPEAR300_H
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		0x50000000
+#define SPEAR300_TELECOM_SIZE		0x10000000
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_TELECOM_REG_SIZE	0x00010000
+#define INT_ENB_MASK_REG		0x54
+#define INT_STS_MASK_REG		0x58
+#define IT_PERS_S_IRQ_MASK		(1 << 0)
+#define IT_CHANGE_S_IRQ_MASK		(1 << 1)
+#define I2S_IRQ_MASK			(1 << 2)
+#define TDM_IRQ_MASK			(1 << 3)
+#define CAMERA_L_IRQ_MASK		(1 << 4)
+#define CAMERA_F_IRQ_MASK		(1 << 5)
+#define CAMERA_V_IRQ_MASK		(1 << 6)
+#define KEYBOARD_IRQ_MASK		(1 << 7)
+#define GPIO1_IRQ_MASK			(1 << 8)
+
+#define SHIRQ_RAS1_MASK			0x1FF
+
+#define SPEAR300_CLCD_BASE		0x60000000
+#define SPEAR300_CLCD_SIZE		0x10000000
+
+#define SPEAR300_SDIO_BASE		0x70000000
+#define SPEAR300_SDIO_SIZE		0x10000000
+
+#define SPEAR300_NAND_0_BASE		0x80000000
+#define SPEAR300_NAND_0_SIZE		0x04000000
+
+#define SPEAR300_NAND_1_BASE		0x84000000
+#define SPEAR300_NAND_1_SIZE		0x04000000
+
+#define SPEAR300_NAND_2_BASE		0x88000000
+#define SPEAR300_NAND_2_SIZE		0x04000000
+
+#define SPEAR300_NAND_3_BASE		0x8c000000
+#define SPEAR300_NAND_3_SIZE		0x04000000
+
+#define SPEAR300_NOR_0_BASE		0x90000000
+#define SPEAR300_NOR_0_SIZE		0x01000000
+
+#define SPEAR300_NOR_1_BASE		0x91000000
+#define SPEAR300_NOR_1_SIZE		0x01000000
+
+#define SPEAR300_NOR_2_BASE		0x92000000
+#define SPEAR300_NOR_2_SIZE		0x01000000
+
+#define SPEAR300_NOR_3_BASE		0x93000000
+#define SPEAR300_NOR_3_SIZE		0x01000000
+
+#define SPEAR300_FSMC_BASE		0x94000000
+#define SPEAR300_FSMC_SIZE		0x05000000
+
+#define SPEAR300_SOC_CONFIG_BASE	0x99000000
+#define SPEAR300_SOC_CONFIG_SIZE	0x00000008
+
+#define SPEAR300_KEYBOARD_BASE		0xA0000000
+#define SPEAR300_KEYBOARD_SIZE		0x09000000
+
+#define SPEAR300_GPIO_BASE		0xA9000000
+#define SPEAR300_GPIO_SIZE		0x07000000
+
+#endif /* __MACH_SPEAR300_H */
+
+#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
new file mode 100644
index 0000000..b27bb8a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear310.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear310.h
+ *
+ * SPEAr310 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR310
+
+#ifndef __MACH_SPEAR310_H
+#define __MACH_SPEAR310_H
+
+#define SPEAR310_NAND_BASE		0x40000000
+#define SPEAR310_NAND_SIZE		0x04000000
+
+#define SPEAR310_FSMC_BASE		0x44000000
+#define SPEAR310_FSMC_SIZE		0x01000000
+
+#define SPEAR310_UART1_BASE		0xB2000000
+#define SPEAR310_UART2_BASE		0xB2080000
+#define SPEAR310_UART3_BASE		0xB2100000
+#define SPEAR310_UART4_BASE		0xB2180000
+#define SPEAR310_UART5_BASE		0xB2200000
+#define SPEAR310_UART_SIZE		0x00080000
+
+#define SPEAR310_HDLC_BASE		0xB2800000
+#define SPEAR310_HDLC_SIZE		0x00800000
+
+#define SPEAR310_RS485_0_BASE		0xB3000000
+#define SPEAR310_RS485_0_SIZE		0x00800000
+
+#define SPEAR310_RS485_1_BASE		0xB3800000
+#define SPEAR310_RS485_1_SIZE		0x00800000
+
+#define SPEAR310_SOC_CONFIG_BASE	0xB4000000
+#define SPEAR310_SOC_CONFIG_SIZE	0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG		0x04
+#define SMII0_IRQ_MASK			(1 << 0)
+#define SMII1_IRQ_MASK			(1 << 1)
+#define SMII2_IRQ_MASK			(1 << 2)
+#define SMII3_IRQ_MASK			(1 << 3)
+#define WAKEUP_SMII0_IRQ_MASK		(1 << 4)
+#define WAKEUP_SMII1_IRQ_MASK		(1 << 5)
+#define WAKEUP_SMII2_IRQ_MASK		(1 << 6)
+#define WAKEUP_SMII3_IRQ_MASK		(1 << 7)
+#define UART1_IRQ_MASK			(1 << 8)
+#define UART2_IRQ_MASK			(1 << 9)
+#define UART3_IRQ_MASK			(1 << 10)
+#define UART4_IRQ_MASK			(1 << 11)
+#define UART5_IRQ_MASK			(1 << 12)
+#define EMI_IRQ_MASK			(1 << 13)
+#define TDM_HDLC_IRQ_MASK		(1 << 14)
+#define RS485_0_IRQ_MASK		(1 << 15)
+#define RS485_1_IRQ_MASK		(1 << 16)
+
+#define SHIRQ_RAS1_MASK			0x000FF
+#define SHIRQ_RAS2_MASK			0x01F00
+#define SHIRQ_RAS3_MASK			0x02000
+#define SHIRQ_INTRCOMM_RAS_MASK		0x1C000
+
+#endif /* __MACH_SPEAR310_H */
+
+#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
new file mode 100644
index 0000000..cacf17a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/spear320.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear320.h
+ *
+ * SPEAr320 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR320
+
+#ifndef __MACH_SPEAR320_H
+#define __MACH_SPEAR320_H
+
+#define SPEAR320_EMI_CTRL_BASE		0x40000000
+#define SPEAR320_EMI_CTRL_SIZE		0x08000000
+
+#define SPEAR320_FSMC_BASE		0x4C000000
+#define SPEAR320_FSMC_SIZE		0x01000000
+
+#define SPEAR320_I2S_BASE		0x60000000
+#define SPEAR320_I2S_SIZE		0x10000000
+
+#define SPEAR320_SDIO_BASE		0x70000000
+#define SPEAR320_SDIO_SIZE		0x10000000
+
+#define SPEAR320_CLCD_BASE		0x90000000
+#define SPEAR320_CLCD_SIZE		0x10000000
+
+#define SPEAR320_PAR_PORT_BASE		0xA0000000
+#define SPEAR320_PAR_PORT_SIZE		0x01000000
+
+#define SPEAR320_CAN0_BASE		0xA1000000
+#define SPEAR320_CAN0_SIZE		0x01000000
+
+#define SPEAR320_CAN1_BASE		0xA2000000
+#define SPEAR320_CAN1_SIZE		0x01000000
+
+#define SPEAR320_UART1_BASE		0xA3000000
+#define SPEAR320_UART2_BASE		0xA4000000
+#define SPEAR320_UART_SIZE		0x01000000
+
+#define SPEAR320_SSP0_BASE		0xA5000000
+#define SPEAR320_SSP0_SIZE		0x01000000
+
+#define SPEAR320_SSP1_BASE		0xA6000000
+#define SPEAR320_SSP1_SIZE		0x01000000
+
+#define SPEAR320_I2C_BASE		0xA7000000
+#define SPEAR320_I2C_SIZE		0x01000000
+
+#define SPEAR320_PWM_BASE		0xA8000000
+#define SPEAR320_PWM_SIZE		0x01000000
+
+#define SPEAR320_SMII0_BASE		0xAA000000
+#define SPEAR320_SMII0_SIZE		0x01000000
+
+#define SPEAR320_SMII1_BASE		0xAB000000
+#define SPEAR320_SMII1_SIZE		0x01000000
+
+#define SPEAR320_SOC_CONFIG_BASE	0xB4000000
+#define SPEAR320_SOC_CONFIG_SIZE	0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG		0x04
+#define INT_CLR_MASK_REG		0x04
+#define INT_ENB_MASK_REG		0x08
+#define GPIO_IRQ_MASK			(1 << 0)
+#define I2S_PLAY_IRQ_MASK		(1 << 1)
+#define I2S_REC_IRQ_MASK		(1 << 2)
+#define EMI_IRQ_MASK			(1 << 7)
+#define CLCD_IRQ_MASK			(1 << 8)
+#define SPP_IRQ_MASK			(1 << 9)
+#define SDIO_IRQ_MASK			(1 << 10)
+#define CAN_U_IRQ_MASK			(1 << 11)
+#define CAN_L_IRQ_MASK			(1 << 12)
+#define UART1_IRQ_MASK			(1 << 13)
+#define UART2_IRQ_MASK			(1 << 14)
+#define SSP1_IRQ_MASK			(1 << 15)
+#define SSP2_IRQ_MASK			(1 << 16)
+#define SMII0_IRQ_MASK			(1 << 17)
+#define MII1_SMII1_IRQ_MASK		(1 << 18)
+#define WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define I2C1_IRQ_MASK			(1 << 21)
+
+#define SHIRQ_RAS1_MASK			0x000380
+#define SHIRQ_RAS3_MASK			0x000007
+#define SHIRQ_INTRCOMM_RAS_MASK		0x3FF800
+
+#endif /* __MACH_SPEAR320_H */
+
+#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
new file mode 100644
index 0000000..92cee63
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/system.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/system.h
+ *
+ * SPEAr3xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
new file mode 100644
index 0000000..a38cc9d
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
new file mode 100644
index 0000000..53ba8bb
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/vmalloc.h b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..df977b3
--- /dev/null
+++ b/arch/arm/mach-spear3xx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif /* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
new file mode 100644
index 0000000..3560f8c
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -0,0 +1,468 @@
+/*
+ * arch/arm/mach-spear3xx/spear300.c
+ *
+ * SPEAr300 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x00
+#define MODE_CONFIG_REG		0x04
+
+/* modes */
+#define NAND_MODE			(1 << 0)
+#define NOR_MODE			(1 << 1)
+#define PHOTO_FRAME_MODE		(1 << 2)
+#define LEND_IP_PHONE_MODE		(1 << 3)
+#define HEND_IP_PHONE_MODE		(1 << 4)
+#define LEND_WIFI_PHONE_MODE		(1 << 5)
+#define HEND_WIFI_PHONE_MODE		(1 << 6)
+#define ATA_PABX_WI2S_MODE		(1 << 7)
+#define ATA_PABX_I2S_MODE		(1 << 8)
+#define CAML_LCDW_MODE			(1 << 9)
+#define CAMU_LCD_MODE			(1 << 10)
+#define CAMU_WLCD_MODE			(1 << 11)
+#define CAML_LCD_MODE			(1 << 12)
+#define ALL_MODES			0x1FFF
+
+struct pmx_mode nand_mode = {
+	.id = NAND_MODE,
+	.name = "nand mode",
+	.mask = 0x00,
+};
+
+struct pmx_mode nor_mode = {
+	.id = NOR_MODE,
+	.name = "nor mode",
+	.mask = 0x01,
+};
+
+struct pmx_mode photo_frame_mode = {
+	.id = PHOTO_FRAME_MODE,
+	.name = "photo frame mode",
+	.mask = 0x02,
+};
+
+struct pmx_mode lend_ip_phone_mode = {
+	.id = LEND_IP_PHONE_MODE,
+	.name = "lend ip phone mode",
+	.mask = 0x03,
+};
+
+struct pmx_mode hend_ip_phone_mode = {
+	.id = HEND_IP_PHONE_MODE,
+	.name = "hend ip phone mode",
+	.mask = 0x04,
+};
+
+struct pmx_mode lend_wifi_phone_mode = {
+	.id = LEND_WIFI_PHONE_MODE,
+	.name = "lend wifi phone mode",
+	.mask = 0x05,
+};
+
+struct pmx_mode hend_wifi_phone_mode = {
+	.id = HEND_WIFI_PHONE_MODE,
+	.name = "hend wifi phone mode",
+	.mask = 0x06,
+};
+
+struct pmx_mode ata_pabx_wi2s_mode = {
+	.id = ATA_PABX_WI2S_MODE,
+	.name = "ata pabx wi2s mode",
+	.mask = 0x07,
+};
+
+struct pmx_mode ata_pabx_i2s_mode = {
+	.id = ATA_PABX_I2S_MODE,
+	.name = "ata pabx i2s mode",
+	.mask = 0x08,
+};
+
+struct pmx_mode caml_lcdw_mode = {
+	.id = CAML_LCDW_MODE,
+	.name = "caml lcdw mode",
+	.mask = 0x0C,
+};
+
+struct pmx_mode camu_lcd_mode = {
+	.id = CAMU_LCD_MODE,
+	.name = "camu lcd mode",
+	.mask = 0x0D,
+};
+
+struct pmx_mode camu_wlcd_mode = {
+	.id = CAMU_WLCD_MODE,
+	.name = "camu wlcd mode",
+	.mask = 0x0E,
+};
+
+struct pmx_mode caml_lcd_mode = {
+	.id = CAML_LCD_MODE,
+	.name = "caml lcd mode",
+	.mask = 0x0F,
+};
+
+/* devices */
+struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc_2_chips = {
+	.name = "fsmc_2_chips",
+	.modes = pmx_fsmc_2_chips_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc_4_chips = {
+	.name = "fsmc_4_chips",
+	.modes = pmx_fsmc_4_chips_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_keyboard_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
+			CAML_LCD_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_keyboard = {
+	.name = "keyboard",
+	.modes = pmx_keyboard_modes,
+	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_clcd_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
+	}, {
+		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			CAMU_LCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_clcd = {
+	.name = "clcd",
+	.modes = pmx_clcd_modes,
+	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_MII_MASK,
+	}, {
+		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	}, {
+		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
+	}, {
+		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
+	}, {
+		.ids = ATA_PABX_WI2S_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
+			| PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_gpio = {
+	.name = "telecom_gpio",
+	.modes = pmx_telecom_gpio_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
+			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
+			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_tdm = {
+	.name = "telecom_tdm",
+	.modes = pmx_telecom_tdm_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
+			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
+			CAML_LCDW_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
+	.name = "telecom_spi_cs_i2c_clk",
+	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_camera_modes[] = {
+	{
+		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
+		.mask = PMX_MII_MASK,
+	}, {
+		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_camera = {
+	.name = "telecom_camera",
+	.modes = pmx_telecom_camera_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_dac_modes[] = {
+	{
+		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_dac = {
+	.name = "telecom_dac",
+	.modes = pmx_telecom_dac_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
+			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_i2s = {
+	.name = "telecom_i2s",
+	.modes = pmx_telecom_i2s_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+			PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_boot_pins = {
+	.name = "telecom_boot_pins",
+	.modes = pmx_telecom_boot_pins_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
+			ATA_PABX_I2S_MODE,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_sdio_4bit = {
+	.name = "telecom_sdio_4bit",
+	.modes = pmx_telecom_sdio_4bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_sdio_8bit = {
+	.name = "telecom_sdio_8bit",
+	.modes = pmx_telecom_sdio_8bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_gpio1_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+			PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio1 = {
+	.name = "arm gpio1",
+	.modes = pmx_gpio1_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear300 specific devices here */
+/* arm gpio1 device registeration */
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+	.dev = {
+		.init_name = "gpio1",
+		.platform_data = &gpio1_plat_data,
+	},
+	.res = {
+		.start = SPEAR300_GPIO_BASE,
+		.end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_IT_PERS_S,
+		.enb_mask = IT_PERS_S_IRQ_MASK,
+		.status_mask = IT_PERS_S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_IT_CHANGE_S,
+		.enb_mask = IT_CHANGE_S_IRQ_MASK,
+		.status_mask = IT_CHANGE_S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S,
+		.enb_mask = I2S_IRQ_MASK,
+		.status_mask = I2S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_TDM,
+		.enb_mask = TDM_IRQ_MASK,
+		.status_mask = TDM_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_L,
+		.enb_mask = CAMERA_L_IRQ_MASK,
+		.status_mask = CAMERA_L_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_F,
+		.enb_mask = CAMERA_F_IRQ_MASK,
+		.status_mask = CAMERA_F_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_V,
+		.enb_mask = CAMERA_V_IRQ_MASK,
+		.status_mask = CAMERA_V_IRQ_MASK,
+	}, {
+		.virq = VIRQ_KEYBOARD,
+		.enb_mask = KEYBOARD_IRQ_MASK,
+		.status_mask = KEYBOARD_IRQ_MASK,
+	}, {
+		.virq = VIRQ_GPIO1,
+		.enb_mask = GPIO1_IRQ_MASK,
+		.status_mask = GPIO1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = INT_ENB_MASK_REG,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = -1,
+	},
+};
+
+/* spear300 routines */
+void __init spear300_init(void)
+{
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	shirq_ras1.regs.base =
+		ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+	if (shirq_ras1.regs.base) {
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ\n");
+	}
+}
+
+void spear300_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
+			SPEAR300_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
new file mode 100644
index 0000000..bb21db1
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-spear3xx/spear300_evb.c
+ *
+ * SPEAr300 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp_cs,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear300 specific devices */
+	&pmx_fsmc_2_chips,
+	&pmx_clcd,
+	&pmx_telecom_sdio_4bit,
+	&pmx_gpio1,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear300 specific devices */
+	&gpio1_device,
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear300 specific devices */
+};
+
+static void __init spear300_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear300 machine init function */
+	spear300_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = &photo_frame_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear300_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear300_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
new file mode 100644
index 0000000..96a1ab8
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -0,0 +1,302 @@
+/*
+ * arch/arm/mach-spear3xx/spear310.c
+ *
+ * SPEAr310 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x08
+
+/* devices */
+struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi_cs_0_1_4_5 = {
+	.name = "emi_cs_0_1_4_5",
+	.modes = pmx_emi_cs_0_1_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi_cs_2_3 = {
+	.name = "emi_cs_2_3",
+	.modes = pmx_emi_cs_2_3_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1 = {
+	.name = "uart1",
+	.modes = pmx_uart1_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart2_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart2 = {
+	.name = "uart2",
+	.modes = pmx_uart2_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart3_4_5 = {
+	.name = "uart3_4_5",
+	.modes = pmx_uart3_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc = {
+	.name = "fsmc",
+	.modes = pmx_fsmc_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_rs485_0_1 = {
+	.name = "rs485_0_1",
+	.modes = pmx_rs485_0_1_modes,
+	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_tdm0_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_tdm0 = {
+	.name = "tdm0",
+	.modes = pmx_tdm0_modes,
+	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear310 specific devices here */
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_SMII0,
+		.status_mask = SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII1,
+		.status_mask = SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII2,
+		.status_mask = SMII2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII3,
+		.status_mask = SMII3_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII0,
+		.status_mask = WAKEUP_SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII1,
+		.status_mask = WAKEUP_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII2,
+		.status_mask = WAKEUP_SMII2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII3,
+		.status_mask = WAKEUP_SMII3_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_ras2_config[] = {
+	{
+		.virq = VIRQ_UART1,
+		.status_mask = UART1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART2,
+		.status_mask = UART2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART3,
+		.status_mask = UART3_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART4,
+		.status_mask = UART4_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART5,
+		.status_mask = UART5_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras2 = {
+	.irq = IRQ_GEN_RAS_2,
+	.dev_config = shirq_ras2_config,
+	.dev_count = ARRAY_SIZE(shirq_ras2_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS2_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+	{
+		.virq = VIRQ_EMI,
+		.status_mask = EMI_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras3 = {
+	.irq = IRQ_GEN_RAS_3,
+	.dev_config = shirq_ras3_config,
+	.dev_count = ARRAY_SIZE(shirq_ras3_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS3_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+	{
+		.virq = VIRQ_TDM_HDLC,
+		.status_mask = TDM_HDLC_IRQ_MASK,
+	}, {
+		.virq = VIRQ_RS485_0,
+		.status_mask = RS485_0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_RS485_1,
+		.status_mask = RS485_1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+	.irq = IRQ_INTRCOMM_RAS_ARM,
+	.dev_config = shirq_intrcomm_ras_config,
+	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+		.clear_reg = -1,
+	},
+};
+
+/* spear310 routines */
+void __init spear310_init(void)
+{
+	void __iomem *base;
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+	if (base) {
+		/* shirq 1 */
+		shirq_ras1.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+		/* shirq 2 */
+		shirq_ras2.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras2);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+
+		/* shirq 3 */
+		shirq_ras3.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras3);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+		/* shirq 4 */
+		shirq_intrcomm_ras.regs.base = base;
+		ret = spear_shirq_register(&shirq_intrcomm_ras);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+	}
+}
+
+void spear310_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
+			SPEAR310_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
new file mode 100644
index 0000000..7facf66
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-spear3xx/spear310_evb.c
+ *
+ * SPEAr310 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_gpio_pin0,
+	&pmx_gpio_pin1,
+	&pmx_gpio_pin2,
+	&pmx_gpio_pin3,
+	&pmx_gpio_pin4,
+	&pmx_gpio_pin5,
+	&pmx_uart0,
+
+	/* spear310 specific devices */
+	&pmx_emi_cs_0_1_4_5,
+	&pmx_emi_cs_2_3,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_uart3_4_5,
+	&pmx_fsmc,
+	&pmx_rs485_0_1,
+	&pmx_tdm0,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear310 specific devices */
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear310 specific devices */
+};
+
+static void __init spear310_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear310 machine init function */
+	spear310_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = NULL;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear310_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear310_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
new file mode 100644
index 0000000..6a12195
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -0,0 +1,549 @@
+/*
+ * arch/arm/mach-spear3xx/spear320.c
+ *
+ * SPEAr320 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x0C
+#define MODE_CONFIG_REG		0x10
+
+/* modes */
+#define AUTO_NET_SMII_MODE	(1 << 0)
+#define AUTO_NET_MII_MODE	(1 << 1)
+#define AUTO_EXP_MODE		(1 << 2)
+#define SMALL_PRINTERS_MODE	(1 << 3)
+#define ALL_MODES		0xF
+
+struct pmx_mode auto_net_smii_mode = {
+	.id = AUTO_NET_SMII_MODE,
+	.name = "Automation Networking SMII Mode",
+	.mask = 0x00,
+};
+
+struct pmx_mode auto_net_mii_mode = {
+	.id = AUTO_NET_MII_MODE,
+	.name = "Automation Networking MII Mode",
+	.mask = 0x01,
+};
+
+struct pmx_mode auto_exp_mode = {
+	.id = AUTO_EXP_MODE,
+	.name = "Automation Expanded Mode",
+	.mask = 0x02,
+};
+
+struct pmx_mode small_printers_mode = {
+	.id = SMALL_PRINTERS_MODE,
+	.name = "Small Printers Mode",
+	.mask = 0x03,
+};
+
+/* devices */
+struct pmx_dev_mode pmx_clcd_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_clcd = {
+	.name = "clcd",
+	.modes = pmx_clcd_modes,
+	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_emi_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi = {
+	.name = "emi",
+	.modes = pmx_emi_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_fsmc = {
+	.name = "fsmc",
+	.modes = pmx_fsmc_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_spp_modes[] = {
+	{
+		.ids = SMALL_PRINTERS_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_spp = {
+	.name = "spp",
+	.modes = pmx_spp_modes,
+	.mode_count = ARRAY_SIZE(pmx_spp_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_sdio_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
+			SMALL_PRINTERS_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_sdio = {
+	.name = "sdio",
+	.modes = pmx_sdio_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdio_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_i2s_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_i2s = {
+	.name = "i2s",
+	.modes = pmx_i2s_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1 = {
+	.name = "uart1",
+	.modes = pmx_uart1_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modem_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
+			PMX_SSP_CS_MASK,
+	}, {
+		.ids = SMALL_PRINTERS_MODE,
+		.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
+			PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1_modem = {
+	.name = "uart1_modem",
+	.modes = pmx_uart1_modem_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart2_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart2 = {
+	.name = "uart2",
+	.modes = pmx_uart2_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_touchscreen_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_touchscreen = {
+	.name = "touchscreen",
+	.modes = pmx_touchscreen_modes,
+	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_can_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
+		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_can = {
+	.name = "can",
+	.modes = pmx_can_modes,
+	.mode_count = ARRAY_SIZE(pmx_can_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_sdio_led_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_sdio_led = {
+	.name = "sdio_led",
+	.modes = pmx_sdio_led_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm0_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm0 = {
+	.name = "pwm0",
+	.modes = pmx_pwm0_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm1_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm1 = {
+	.name = "pwm1",
+	.modes = pmx_pwm1_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm2_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm2 = {
+	.name = "pwm2",
+	.modes = pmx_pwm2_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm3_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm3 = {
+	.name = "pwm3",
+	.modes = pmx_pwm3_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_ssp1_modes[] = {
+	{
+		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp1 = {
+	.name = "ssp1",
+	.modes = pmx_ssp1_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_ssp2_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp2 = {
+	.name = "ssp2",
+	.modes = pmx_ssp2_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_mii1_modes[] = {
+	{
+		.ids = AUTO_NET_MII_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_mii1 = {
+	.name = "mii1",
+	.modes = pmx_mii1_modes,
+	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_smii0_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_smii0 = {
+	.name = "smii0",
+	.modes = pmx_smii0_modes,
+	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_smii1_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_smii1 = {
+	.name = "smii1",
+	.modes = pmx_smii1_modes,
+	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_i2c1_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_i2c1 = {
+	.name = "i2c1",
+	.modes = pmx_i2c1_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear320 specific devices here */
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_EMI,
+		.status_mask = EMI_IRQ_MASK,
+		.clear_mask = EMI_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CLCD,
+		.status_mask = CLCD_IRQ_MASK,
+		.clear_mask = CLCD_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SPP,
+		.status_mask = SPP_IRQ_MASK,
+		.clear_mask = SPP_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+	{
+		.virq = VIRQ_PLGPIO,
+		.enb_mask = GPIO_IRQ_MASK,
+		.status_mask = GPIO_IRQ_MASK,
+		.clear_mask = GPIO_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S_PLAY,
+		.enb_mask = I2S_PLAY_IRQ_MASK,
+		.status_mask = I2S_PLAY_IRQ_MASK,
+		.clear_mask = I2S_PLAY_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S_REC,
+		.enb_mask = I2S_REC_IRQ_MASK,
+		.status_mask = I2S_REC_IRQ_MASK,
+		.clear_mask = I2S_REC_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras3 = {
+	.irq = IRQ_GEN_RAS_3,
+	.dev_config = shirq_ras3_config,
+	.dev_count = ARRAY_SIZE(shirq_ras3_config),
+	.regs = {
+		.enb_reg = INT_ENB_MASK_REG,
+		.reset_to_enb = 1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS3_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+	{
+		.virq = VIRQ_CANU,
+		.status_mask = CAN_U_IRQ_MASK,
+		.clear_mask = CAN_U_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CANL,
+		.status_mask = CAN_L_IRQ_MASK,
+		.clear_mask = CAN_L_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART1,
+		.status_mask = UART1_IRQ_MASK,
+		.clear_mask = UART1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART2,
+		.status_mask = UART2_IRQ_MASK,
+		.clear_mask = UART2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SSP1,
+		.status_mask = SSP1_IRQ_MASK,
+		.clear_mask = SSP1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SSP2,
+		.status_mask = SSP2_IRQ_MASK,
+		.clear_mask = SSP2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII0,
+		.status_mask = SMII0_IRQ_MASK,
+		.clear_mask = SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_MII1_SMII1,
+		.status_mask = MII1_SMII1_IRQ_MASK,
+		.clear_mask = MII1_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII0,
+		.status_mask = WAKEUP_SMII0_IRQ_MASK,
+		.clear_mask = WAKEUP_SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_MII1_SMII1,
+		.status_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+		.clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2C,
+		.status_mask = I2C1_IRQ_MASK,
+		.clear_mask = I2C1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+	.irq = IRQ_INTRCOMM_RAS_ARM,
+	.dev_config = shirq_intrcomm_ras_config,
+	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+/* spear320 routines */
+void __init spear320_init(void)
+{
+	void __iomem *base;
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+	if (base) {
+		/* shirq 1 */
+		shirq_ras1.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+		/* shirq 3 */
+		shirq_ras3.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras3);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+		/* shirq 4 */
+		shirq_intrcomm_ras.regs.base = base;
+		ret = spear_shirq_register(&shirq_intrcomm_ras);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+	}
+}
+
+void spear320_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
+			SPEAR320_SOC_CONFIG_SIZE);
+}
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
new file mode 100644
index 0000000..62ac685
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-spear3xx/spear320_evb.c
+ *
+ * SPEAr320 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear320 specific devices */
+	&pmx_fsmc,
+	&pmx_sdio,
+	&pmx_i2s,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_can,
+	&pmx_pwm0,
+	&pmx_pwm1,
+	&pmx_pwm2,
+	&pmx_mii1,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear320 specific devices */
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear320 specific devices */
+};
+
+static void __init spear320_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear320 machine init function */
+	spear320_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = &auto_net_mii_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear320_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear320_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
new file mode 100644
index 0000000..e87313a
--- /dev/null
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -0,0 +1,548 @@
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear3xx machines common devices here */
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= SPEAR_GPIO_INT_BASE,
+};
+
+struct amba_device gpio_device = {
+	.dev = {
+		.init_name = "gpio",
+		.platform_data = &gpio_plat_data,
+	},
+	.res = {
+		.start = SPEAR3XX_ICM3_GPIO_BASE,
+		.end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+};
+
+/* uart device registeration */
+struct amba_device uart_device = {
+	.dev = {
+		.init_name = "uart",
+	},
+	.res = {
+		.start = SPEAR3XX_ICM1_UART_BASE,
+		.end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_UART, NO_IRQ},
+};
+
+/* Do spear3xx familiy common initialization part here */
+void __init spear3xx_init(void)
+{
+	/* nothing to do for now */
+}
+
+/* This will initialize vic */
+void __init spear3xx_init_irq(void)
+{
+	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
+}
+
+/* Following will create static virtual/physical mappings */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
+		.length		= SPEAR3XX_ICM1_UART_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
+		.length		= SPEAR3XX_ML1_VIC_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
+		.length		= SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
+		.length		= SPEAR3XX_ICM3_MISC_REG_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+
+	/* This will initialize clock framework */
+	clk_init();
+}
+
+/* pad multiplexing support */
+/* devices */
+struct pmx_dev_mode pmx_firda_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_firda = {
+	.name = "firda",
+	.modes = pmx_firda_modes,
+	.mode_count = ARRAY_SIZE(pmx_firda_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_i2c_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_I2C_MASK,
+	},
+};
+
+struct pmx_dev pmx_i2c = {
+	.name = "i2c",
+	.modes = pmx_i2c_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_ssp_cs_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp_cs = {
+	.name = "ssp_chip_selects",
+	.modes = pmx_ssp_cs_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_ssp_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_SSP_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp = {
+	.name = "ssp",
+	.modes = pmx_ssp_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_mii_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_mii = {
+	.name = "mii",
+	.modes = pmx_mii_modes,
+	.mode_count = ARRAY_SIZE(pmx_mii_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN0_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin0 = {
+	.name = "gpio_pin0",
+	.modes = pmx_gpio_pin0_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin1 = {
+	.name = "gpio_pin1",
+	.modes = pmx_gpio_pin1_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN2_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin2 = {
+	.name = "gpio_pin2",
+	.modes = pmx_gpio_pin2_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN3_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin3 = {
+	.name = "gpio_pin3",
+	.modes = pmx_gpio_pin3_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN4_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin4 = {
+	.name = "gpio_pin4",
+	.modes = pmx_gpio_pin4_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin5 = {
+	.name = "gpio_pin5",
+	.modes = pmx_gpio_pin5_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_uart0_modem_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart0_modem = {
+	.name = "uart0_modem",
+	.modes = pmx_uart0_modem_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_uart0_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart0 = {
+	.name = "uart0",
+	.modes = pmx_uart0_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_timer_3_4_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_timer_3_4 = {
+	.name = "timer_3_4",
+	.modes = pmx_timer_3_4_modes,
+	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_timer_1_2_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_timer_1_2 = {
+	.name = "timer_1_2",
+	.modes = pmx_timer_1_2_modes,
+	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
+	.enb_on_reset = 0,
+};
+
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* plgpios devices */
+struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_0_1 = {
+	.name = "plgpio 0 and 1",
+	.modes = pmx_plgpio_0_1_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_2_3 = {
+	.name = "plgpio 2 and 3",
+	.modes = pmx_plgpio_2_3_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_I2C_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_4_5 = {
+	.name = "plgpio 4 and 5",
+	.modes = pmx_plgpio_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_6_9 = {
+	.name = "plgpio 6 to 9",
+	.modes = pmx_plgpio_6_9_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_10_27 = {
+	.name = "plgpio 10 to 27",
+	.modes = pmx_plgpio_10_27_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_28_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN0_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_28 = {
+	.name = "plgpio 28",
+	.modes = pmx_plgpio_28_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_29_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_29 = {
+	.name = "plgpio 29",
+	.modes = pmx_plgpio_29_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_30_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN2_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_30 = {
+	.name = "plgpio 30",
+	.modes = pmx_plgpio_30_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_31_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN3_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_31 = {
+	.name = "plgpio 31",
+	.modes = pmx_plgpio_31_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_32_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN4_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_32 = {
+	.name = "plgpio 32",
+	.modes = pmx_plgpio_32_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_33_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_33 = {
+	.name = "plgpio 33",
+	.modes = pmx_plgpio_33_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_34_36 = {
+	.name = "plgpio 34 to 36",
+	.modes = pmx_plgpio_34_36_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_37_42 = {
+	.name = "plgpio 37 to 42",
+	.modes = pmx_plgpio_37_42_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_43_44_47_48 = {
+	.name = "plgpio 43, 44, 47 and 48",
+	.modes = pmx_plgpio_43_44_47_48_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_45_46_49_50 = {
+	.name = "plgpio 45, 46, 49 and 50",
+	.modes = pmx_plgpio_45_46_49_50_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
+	.enb_on_reset = 1,
+};
+
+#endif
+
+/* spear padmux initialization function */
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+{
+	int ret = 0;
+
+	/* pad mux initialization */
+	pmx_driver->base = ioremap(base, size);
+	if (!pmx_driver->base) {
+		ret = -ENOMEM;
+		goto pmx_fail;
+	}
+
+	ret = pmx_register(pmx_driver);
+	iounmap(pmx_driver->base);
+
+pmx_fail:
+	if (ret)
+		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+				ret);
+}
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
new file mode 100644
index 0000000..bddba03
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -0,0 +1,20 @@
+#
+# SPEAr6XX Machine configuration file
+#
+
+if ARCH_SPEAR6XX
+
+choice
+	prompt "SPEAr6XX Family"
+	default MACH_SPEAR600
+
+config MACH_SPEAR600
+	bool "SPEAr600"
+	help
+	  Supports ST SPEAr600 Machine
+endchoice
+
+# Adding SPEAr6XX machine specific configuration files
+source "arch/arm/mach-spear6xx/Kconfig600"
+
+endif #ARCH_SPEAR6XX
diff --git a/arch/arm/mach-spear6xx/Kconfig600 b/arch/arm/mach-spear6xx/Kconfig600
new file mode 100644
index 0000000..9e19f65
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Kconfig600
@@ -0,0 +1,17 @@
+#
+# SPEAr600 machine configuration file
+#
+
+if MACH_SPEAR600
+
+choice
+	prompt "SPEAr600 Boards"
+	default BOARD_SPEAR600_EVB
+
+config	BOARD_SPEAR600_EVB
+	bool "SPEAr600 Evaluation Board"
+	help
+	  Supports ST SPEAr600 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR600
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
new file mode 100644
index 0000000..cc1a4d8
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for SPEAr6XX machine series
+#
+
+# common files
+obj-y	+= clock.o spear6xx.o
+
+# spear600 specific files
+obj-$(CONFIG_MACH_SPEAR600) += spear600.o
+
+# spear600 boards files
+obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
new file mode 100644
index 0000000..7a1f3c0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
new file mode 100644
index 0000000..13e27c7
--- /dev/null
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -0,0 +1,483 @@
+/*
+ * arch/arm/mach-spear6xx/clock.c
+ *
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 32000,
+};
+
+/* 30 MHz oscillator clock */
+static struct clk osc_30m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 30000000,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+	.pclk = &osc_32k_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = RTC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from 30 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+	.mode_reg = PLL1_CTR,
+	.cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+	.pclk = &osc_30m_clk,
+	.en_reg = PLL1_CTR,
+	.en_reg_bit = PLL_ENABLE,
+	.recalc = &pll1_clk_recalc,
+	.private_data = &pll1_config,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_30m_clk,
+	.rate = 48000000,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_30m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &follow_parent,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &ahb_config,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+	.pclk_info = uart_pclk_info,
+	.pclk_count = ARRAY_SIZE(uart_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+	.synth_reg = UART_CLK_SYNT,
+};
+
+/* uart0 clock */
+static struct clk uart0_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART0_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* uart1 clock */
+static struct clk uart1_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART1_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+	.synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+	.pclk_info = firda_pclk_info,
+	.pclk_count = ARRAY_SIZE(firda_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FIRDA_CLK_ENB,
+	.pclk_sel = &firda_pclk_sel,
+	.pclk_sel_shift = FIRDA_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &firda_config,
+};
+
+/* clcd configurations */
+static struct aux_clk_config clcd_config = {
+	.synth_reg = CLCD_CLK_SYNT,
+};
+
+/* clcd parents */
+static struct pclk_info clcd_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* clcd parent select structure */
+static struct pclk_sel clcd_pclk_sel = {
+	.pclk_info = clcd_pclk_info,
+	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = CLCD_CLK_MASK,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = CLCD_CLK_ENB,
+	.pclk_sel = &clcd_pclk_sel,
+	.pclk_sel_shift = CLCD_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &clcd_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+	.pclk_info = gpt_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0_1 configurations */
+static struct aux_clk_config gpt0_1_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 ARM1 subsystem timer clock */
+static struct clk gpt0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT0_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_1_config,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT1_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_1_config,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+	.synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT2_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT2_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt2_config,
+};
+
+/* gpt3 configurations */
+static struct aux_clk_config gpt3_config = {
+	.synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt3 timer clock */
+static struct clk gpt3_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT3_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT3_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt3_config,
+};
+
+/* clock derived from pll3 clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH0_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBD_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &apb_config,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = I2C_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = DMA_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = JPEG_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GMAC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SMI_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* fsmc clock */
+static struct clk fsmc_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FSMC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = ADC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp0 clock */
+static struct clk ssp0_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP0_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP2_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio0 ARM subsystem clock */
+static struct clk gpio0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio2 clock */
+static struct clk gpio2_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO2_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* array of all spear 6xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+	/* root clks */
+	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
+	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
+	/* clock derived from 32 KHz os		 clk */
+	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	/* clock derived from 30 MHz os		 clk */
+	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
+	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
+	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	/* clock derived from pll1 clk */
+	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
+	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .dev_id = "uart0",		.clk = &uart0_clk},
+	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "firda",		.clk = &firda_clk},
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
+	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
+	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
+	/* clock derived from pll3 clk */
+	{ .dev_id = "usbh0",		.clk = &usbh0_clk},
+	{ .dev_id = "usbh1",		.clk = &usbh1_clk},
+	{ .dev_id = "usbd",		.clk = &usbd_clk},
+	/* clock derived from ahb clk */
+	{ .con_id = "apb_clk",		.clk = &apb_clk},
+	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "dma",		.clk = &dma_clk},
+	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
+	{ .dev_id = "gmac",		.clk = &gmac_clk},
+	{ .dev_id = "smi",		.clk = &smi_clk},
+	{ .dev_id = "fsmc",		.clk = &fsmc_clk},
+	/* clock derived from apb clk */
+	{ .dev_id = "adc",		.clk = &adc_clk},
+	{ .dev_id = "ssp0",		.clk = &ssp0_clk},
+	{ .dev_id = "ssp1",		.clk = &ssp1_clk},
+	{ .dev_id = "ssp2",		.clk = &ssp2_clk},
+	{ .dev_id = "gpio0",		.clk = &gpio0_clk},
+	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
+	{ .dev_id = "gpio2",		.clk = &gpio2_clk},
+};
+
+void __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	recalc_root_clocks();
+}
diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h
new file mode 100644
index 0000000..05676bf
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/clkdev.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S
new file mode 100644
index 0000000..0f3ea39
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/debug-macro.S
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
new file mode 100644
index 0000000..9eaecae
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		bne	1001f
+		ldr	\base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		teq	\irqstat, #0
+		beq	1002f				@ this will set/reset
+							@ zero register
+		mov	\irqnr, #32
+1001:
+		/*
+		 * Following code will find bit position of least significang
+		 * bit set in irqstat, using following equation
+		 * least significant bit set in n = (n & ~(n-1))
+		 */
+		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
+		mvn	\tmp, \tmp			@ tmp = ~tmp
+		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
+		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+		clz	\tmp, \irqstat			@ tmp = leading zeros
+
+		rsb	\tmp, \tmp, #0x1F		@ tmp = 32 - tmp - 1
+		add	\irqnr, \irqnr, \tmp
+
+1002:		/* EQ will be set if no irqs pending */
+		.endm
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
new file mode 100644
index 0000000..16205a5
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/generic.h
+ *
+ * SPEAr6XX machine family specific generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
+
+/* Add spear6xx family device structure declarations here */
+extern struct amba_device gpio_device[];
+extern struct amba_device uart_device[];
+extern struct sys_timer spear_sys_timer;
+
+/* Add spear6xx family function declarations here */
+void __init spear6xx_map_io(void);
+void __init spear6xx_init_irq(void);
+void __init spear6xx_init(void);
+void __init spear600_init(void);
+void __init clk_init(void);
+
+/* Add spear600 machine device structure declarations here */
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h
new file mode 100644
index 0000000..3a789db
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/gpio.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
new file mode 100644
index 0000000..7545116
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */
+
diff --git a/arch/arm/mach-spear6xx/include/mach/io.h b/arch/arm/mach-spear6xx/include/mach/io.h
new file mode 100644
index 0000000..fb7c106
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif	/* __MACH_IO_H */
+
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
new file mode 100644
index 0000000..8f214b0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+/* IRQ definitions */
+/* VIC 1 */
+#define IRQ_INTRCOMM_SW_IRQ			0
+#define IRQ_INTRCOMM_CPU_1			1
+#define IRQ_INTRCOMM_CPU_2			2
+#define IRQ_INTRCOMM_RAS2A11_1			3
+#define IRQ_INTRCOMM_RAS2A11_2			4
+#define IRQ_INTRCOMM_RAS2A12_1			5
+#define IRQ_INTRCOMM_RAS2A12_2			6
+#define IRQ_GEN_RAS_0				7
+#define IRQ_GEN_RAS_1				8
+#define IRQ_GEN_RAS_2				9
+#define IRQ_GEN_RAS_3				10
+#define IRQ_GEN_RAS_4				11
+#define IRQ_GEN_RAS_5				12
+#define IRQ_GEN_RAS_6				13
+#define IRQ_GEN_RAS_7				14
+#define IRQ_GEN_RAS_8				15
+#define IRQ_CPU_GPT1_1				16
+#define IRQ_CPU_GPT1_2				17
+#define IRQ_LOCAL_GPIO				18
+#define IRQ_PLL_UNLOCK				19
+#define IRQ_JPEG				20
+#define IRQ_FSMC				21
+#define IRQ_IRDA				22
+#define IRQ_RESERVED				23
+#define IRQ_UART_0				24
+#define IRQ_UART_1				25
+#define IRQ_SSP_1				26
+#define IRQ_SSP_2				27
+#define IRQ_I2C					28
+#define IRQ_GEN_RAS_9				29
+#define IRQ_GEN_RAS_10				30
+#define IRQ_GEN_RAS_11				31
+
+/* VIC 2 */
+#define IRQ_APPL_GPT1_1				32
+#define IRQ_APPL_GPT1_2				33
+#define IRQ_APPL_GPT2_1				34
+#define IRQ_APPL_GPT2_2				35
+#define IRQ_APPL_GPIO				36
+#define IRQ_APPL_SSP				37
+#define IRQ_APPL_ADC				38
+#define IRQ_APPL_RESERVED			39
+#define IRQ_AHB_EXP_MASTER			40
+#define IRQ_DDR_CONTROLLER			41
+#define IRQ_BASIC_DMA				42
+#define IRQ_BASIC_RESERVED1			43
+#define IRQ_BASIC_SMI				44
+#define IRQ_BASIC_CLCD				45
+#define IRQ_EXP_AHB_1				46
+#define IRQ_EXP_AHB_2				47
+#define IRQ_BASIC_GPT1_1			48
+#define IRQ_BASIC_GPT1_2			49
+#define IRQ_BASIC_RTC				50
+#define IRQ_BASIC_GPIO				51
+#define IRQ_BASIC_WDT				52
+#define IRQ_BASIC_RESERVED			53
+#define IRQ_AHB_EXP_SLAVE			54
+#define IRQ_GMAC_1				55
+#define IRQ_GMAC_2				56
+#define IRQ_USB_DEV				57
+#define IRQ_USB_H_OHCI_0			58
+#define IRQ_USB_H_EHCI_0			59
+#define IRQ_USB_H_OHCI_1			60
+#define IRQ_USB_H_EHCI_1			61
+#define IRQ_EXP_AHB_3				62
+#define IRQ_EXP_AHB_4				63
+
+#define IRQ_VIC_END				64
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
+#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
+#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
+#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
+#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
+#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+
+#endif	/* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
new file mode 100644
index 0000000..781f088
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif	/* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
new file mode 100644
index 0000000..0390803
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include <mach/spear.h>
+
+#define MISC_BASE		VA_SPEAR6XX_ICM3_MISC_REG_BASE
+
+#define SOC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR		((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR		((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ		((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD		((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR		((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG		((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG		((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT		2
+#define CLCD_CLK_MASK		0x3
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		10
+#define GPT2_CLK_SHIFT		11
+#define GPT3_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_MASK	0
+#define AUX_CLK_PLL1_MASK	1
+
+#define PERIP1_CLK_ENB		((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB		3
+#define UART1_CLK_ENB		4
+#define SSP0_CLK_ENB		5
+#define SSP1_CLK_ENB		6
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FSMC_CLK_ENB		9
+#define FIRDA_CLK_ENB		10
+#define GPT2_CLK_ENB		11
+#define GPT3_CLK_ENB		12
+#define GPIO2_CLK_ENB		13
+#define SSP2_CLK_ENB		14
+#define ADC_CLK_ENB		15
+#define GPT1_CLK_ENB		11
+#define RTC_CLK_ENB		17
+#define GPIO1_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define CLCD_CLK_ENB		22
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH0_CLK_ENB		25
+#define USBH1_CLK_ENB		26
+
+#define SOC_CORE_ID		((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB		((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST		((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST		8
+
+#define SOC_USER_ID		((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST		((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG		((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG		((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG		((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG		((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+
+#define ICM1_ARB_CFG		((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG		((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG		((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG		((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG		((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG		((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG		((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG		((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG		((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG		((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG		((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG	((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG	((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG		((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR		((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR		((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES		((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES		((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES		((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES		((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES		((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR		((unsigned int *)(MISC_BASE + 0x11C))
+
+#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
new file mode 100644
index 0000000..a835f5b
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/spear.h
+ *
+ * SPEAr6xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR6XX_H
+#define __MACH_SPEAR6XX_H
+
+#include <mach/hardware.h>
+#include <mach/spear600.h>
+
+#define SPEAR6XX_ML_SDRAM_BASE		0x00000000
+#define SPEAR6XX_ML_SDRAM_SIZE		0x40000000
+
+/* ICM1 - Low speed connection */
+#define SPEAR6XX_ICM1_BASE		0xD0000000
+#define SPEAR6XX_ICM1_SIZE		0x08000000
+
+#define SPEAR6XX_ICM1_UART0_BASE	0xD0000000
+#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
+#define SPEAR6XX_ICM1_UART0_SIZE	0x00080000
+
+#define SPEAR6XX_ICM1_UART1_BASE	0xD0080000
+#define SPEAR6XX_ICM1_UART1_SIZE	0x00080000
+
+#define SPEAR6XX_ICM1_SSP0_BASE		0xD0100000
+#define SPEAR6XX_ICM1_SSP0_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_SSP1_BASE		0xD0180000
+#define SPEAR6XX_ICM1_SSP1_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_I2C_BASE		0xD0200000
+#define SPEAR6XX_ICM1_I2C_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_JPEG_BASE		0xD0800000
+#define SPEAR6XX_ICM1_JPEG_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_IRDA_BASE		0xD1000000
+#define SPEAR6XX_ICM1_IRDA_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_FSMC_BASE		0xD1800000
+#define SPEAR6XX_ICM1_FSMC_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_NAND_BASE		0xD2000000
+#define SPEAR6XX_ICM1_NAND_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_SRAM_BASE		0xD2800000
+#define SPEAR6XX_ICM1_SRAM_SIZE		0x00800000
+
+/* ICM2 - Application Subsystem */
+#define SPEAR6XX_ICM2_BASE		0xD8000000
+#define SPEAR6XX_ICM2_SIZE		0x08000000
+
+#define SPEAR6XX_ICM2_TMR0_BASE		0xD8000000
+#define SPEAR6XX_ICM2_TMR0_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_TMR1_BASE		0xD8080000
+#define SPEAR6XX_ICM2_TMR1_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_GPIO_BASE		0xD8100000
+#define SPEAR6XX_ICM2_GPIO_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_SPI2_BASE		0xD8180000
+#define SPEAR6XX_ICM2_SPI2_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_ADC_BASE		0xD8200000
+#define SPEAR6XX_ICM2_ADC_SIZE		0x00080000
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR6XX_ML_CPU_BASE		0xF0000000
+#define SPEAR6XX_ML_CPU_SIZE		0x08000000
+
+#define SPEAR6XX_CPU_TMR_BASE		0xF0000000
+#define SPEAR6XX_CPU_TMR_SIZE		0x00100000
+
+#define SPEAR6XX_CPU_GPIO_BASE		0xF0100000
+#define SPEAR6XX_CPU_GPIO_SIZE		0x00100000
+
+#define SPEAR6XX_CPU_VIC_SEC_BASE	0xF1000000
+#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
+#define SPEAR6XX_CPU_VIC_SEC_SIZE	0x00100000
+
+#define SPEAR6XX_CPU_VIC_PRI_BASE	0xF1100000
+#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define SPEAR6XX_CPU_VIC_PRI_SIZE	0x00100000
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR6XX_ICM3_BASE		0xF8000000
+#define SPEAR6XX_ICM3_SIZE		0x08000000
+
+#define SPEAR6XX_ICM3_SMEM_BASE		0xF8000000
+#define SPEAR6XX_ICM3_SMEM_SIZE		0x04000000
+
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE	0xFC000000
+#define SPEAR6XX_ICM3_SMI_CTRL_SIZE	0x00200000
+
+#define SPEAR6XX_ICM3_CLCD_BASE		0xFC200000
+#define SPEAR6XX_ICM3_CLCD_SIZE		0x00200000
+
+#define SPEAR6XX_ICM3_DMA_BASE		0xFC400000
+#define SPEAR6XX_ICM3_DMA_SIZE		0x00200000
+
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	0xFC600000
+#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE	0x00200000
+
+#define SPEAR6XX_ICM3_TMR_BASE		0xFC800000
+#define SPEAR6XX_ICM3_TMR_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_WDT_BASE		0xFC880000
+#define SPEAR6XX_ICM3_WDT_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_RTC_BASE		0xFC900000
+#define SPEAR6XX_ICM3_RTC_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_GPIO_BASE		0xFC980000
+#define SPEAR6XX_ICM3_GPIO_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE	0xFCA00000
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR6XX_ICM3_SYS_CTRL_SIZE	0x00080000
+
+#define SPEAR6XX_ICM3_MISC_REG_BASE	0xFCA80000
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
+#define SPEAR6XX_ICM3_MISC_REG_SIZE	0x00080000
+
+/* ICM4 - High Speed Connection */
+#define SPEAR6XX_ICM4_BASE		0xE0000000
+#define SPEAR6XX_ICM4_SIZE		0x08000000
+
+#define SPEAR6XX_ICM4_GMAC_BASE		0xE0800000
+#define SPEAR6XX_ICM4_GMAC_SIZE		0x00800000
+
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE	0xE1000000
+#define SPEAR6XX_ICM4_USBD_FIFO_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USBD_CSR_BASE	0xE1100000
+#define SPEAR6XX_ICM4_USBD_CSR_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE	0xE1200000
+#define SPEAR6XX_ICM4_USBD_PLDT_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE	0xE1800000
+#define SPEAR6XX_ICM4_USB_EHCI0_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE	0xE1900000
+#define SPEAR6XX_ICM4_USB_OHCI0_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE	0xE2000000
+#define SPEAR6XX_ICM4_USB_EHCI1_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE	0xE2100000
+#define SPEAR6XX_ICM4_USB_OHCI1_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_ARB_BASE	0xE2800000
+#define SPEAR6XX_ICM4_USB_ARB_SIZE	0x00010000
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR6XX_ICM1_UART0_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR6XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR6XX_ICM3_SYS_CTRL_BASE
+
+#endif /* __MACH_SPEAR6XX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
new file mode 100644
index 0000000..c068cc5
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/spear600.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear66xx/include/mach/spear600.h
+ *
+ * SPEAr600 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR600
+
+#ifndef __MACH_SPEAR600_H
+#define __MACH_SPEAR600_H
+
+#endif /* __MACH_SPEAR600_H */
+
+#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
new file mode 100644
index 0000000..0b1d2be
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/system.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/system.h
+ *
+ * SPEAr6xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif	/* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h
new file mode 100644
index 0000000..ac1c5b0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/timex.h
+ *
+ * SPEAr6XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif	/* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h
new file mode 100644
index 0000000..77f0765
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/uncompress.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif	/* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/vmalloc.h b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..4a0b56c
--- /dev/null
+++ b/arch/arm/mach-spear6xx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif	/* __MACH_VMALLOC_H */
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
new file mode 100644
index 0000000..5c484c4
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear600.c
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear6xx/spear600.c
+ *
+ * SPEAr600 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear600 specific devices here */
+
+void __init spear600_init(void)
+{
+	/* call spear6xx family common init function */
+	spear6xx_init();
+}
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
new file mode 100644
index 0000000..daff8d0
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-spear6xx/spear600_evb.c
+ *
+ * SPEAr600 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+static struct amba_device *amba_devs[] __initdata = {
+	&gpio_device[0],
+	&gpio_device[1],
+	&gpio_device[2],
+	&uart_device[0],
+	&uart_device[1],
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+};
+
+static void __init spear600_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear600 machine init function */
+	spear600_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear6xx_map_io,
+	.init_irq	=	spear6xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear600_evb_init,
+MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
new file mode 100644
index 0000000..baf6bcc
--- /dev/null
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -0,0 +1,157 @@
+/*
+ * arch/arm/mach-spear6xx/spear6xx.c
+ *
+ * SPEAr6XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear6xx machines common devices here */
+/* uart device registeration */
+struct amba_device uart_device[] = {
+	{
+		.dev = {
+			.init_name = "uart0",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART0_BASE,
+			.end = SPEAR6XX_ICM1_UART0_BASE +
+				SPEAR6XX_ICM1_UART0_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_0, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "uart1",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART1_BASE,
+			.end = SPEAR6XX_ICM1_UART1_BASE +
+				SPEAR6XX_ICM1_UART1_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_1, NO_IRQ},
+	}
+};
+
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data[] = {
+	{
+		.gpio_base	= 0,
+		.irq_base	= SPEAR_GPIO0_INT_BASE,
+	}, {
+		.gpio_base	= 8,
+		.irq_base	= SPEAR_GPIO1_INT_BASE,
+	}, {
+		.gpio_base	= 16,
+		.irq_base	= SPEAR_GPIO2_INT_BASE,
+	},
+};
+
+struct amba_device gpio_device[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = &gpio_plat_data[0],
+		},
+		.res = {
+			.start = SPEAR6XX_CPU_GPIO_BASE,
+			.end = SPEAR6XX_CPU_GPIO_BASE +
+				SPEAR6XX_CPU_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = &gpio_plat_data[1],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM3_GPIO_BASE,
+			.end = SPEAR6XX_ICM3_GPIO_BASE +
+				SPEAR6XX_ICM3_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = &gpio_plat_data[2],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM2_GPIO_BASE,
+			.end = SPEAR6XX_ICM2_GPIO_BASE +
+				SPEAR6XX_ICM2_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_APPL_GPIO, NO_IRQ},
+	}
+};
+
+/* This will add devices, and do machine specific tasks */
+void __init spear6xx_init(void)
+{
+	/* nothing to do for now */
+}
+
+/* This will initialize vic */
+void __init spear6xx_init_irq(void)
+{
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
+}
+
+/* Following will create static virtual/physical mappings */
+static struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
+		.length		= SPEAR6XX_ICM1_UART0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
+		.length		= SPEAR6XX_CPU_VIC_PRI_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
+		.length		= SPEAR6XX_CPU_VIC_SEC_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_BASE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear6xx_map_io(void)
+{
+	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
+
+	/* This will initialize clock framework */
+	clk_init();
+}
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 111f7ea..5af71d5 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -610,34 +610,34 @@ EXPORT_SYMBOL(clk_get_rate);
 
 static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
 {
-	if (rate >= 18900000)
+	if (rate <= 18900000)
 		return 18900000;
-	if (rate >= 20800000)
+	if (rate <= 20800000)
 		return 20800000;
-	if (rate >= 23100000)
+	if (rate <= 23100000)
 		return 23100000;
-	if (rate >= 26000000)
+	if (rate <= 26000000)
 		return 26000000;
-	if (rate >= 29700000)
+	if (rate <= 29700000)
 		return 29700000;
-	if (rate >= 34700000)
+	if (rate <= 34700000)
 		return 34700000;
-	if (rate >= 41600000)
+	if (rate <= 41600000)
 		return 41600000;
-	if (rate >= 52000000)
+	if (rate <= 52000000)
 		return 52000000;
 	return -EINVAL;
 }
 
 static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
 {
-	if (rate >= 13000000)
+	if (rate <= 13000000)
 		return 13000000;
-	if (rate >= 52000000)
+	if (rate <= 52000000)
 		return 52000000;
-	if (rate >= 104000000)
+	if (rate <= 104000000)
 		return 104000000;
-	if (rate >= 208000000)
+	if (rate <= 208000000)
 		return 208000000;
 	return -EINVAL;
 }
@@ -1276,11 +1276,8 @@ static struct clk_lookup lookups[] = {
 
 static void __init clk_register(void)
 {
-	int i;
-
 	/* Register the lookups */
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 }
 
 /*
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..5f34eb6 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -3,7 +3,7 @@
  * arch/arm/mach-u300/core.c
  *
  *
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2010 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Core platform support, IRQ handling and device definitions.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
@@ -19,6 +19,7 @@
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <mach/coh901318.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -29,6 +30,7 @@
 
 #include <mach/hardware.h>
 #include <mach/syscon.h>
+#include <mach/dma_channels.h>
 
 #include "clock.h"
 #include "mmc.h"
@@ -356,7 +358,7 @@ static struct resource ave_resources[] = {
 	/*
 	 * The AVE3e requires two regions of 256MB that it considers
 	 * "invisible". The hardware will not be able to access these
-	 * adresses, so they should never point to system RAM.
+	 * addresses, so they should never point to system RAM.
 	 */
 	{
 		.name  = "AVE3e Reserved 0",
@@ -372,8 +374,1019 @@ static struct resource ave_resources[] = {
 	},
 };
 
+static struct resource dma_resource[] = {
+	{
+		.start = U300_DMAC_BASE,
+		.end = U300_DMAC_BASE + PAGE_SIZE - 1,
+		.flags =  IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_U300_DMA,
+		.end = IRQ_U300_DMA,
+		.flags =  IORESOURCE_IRQ,
+	}
+};
+
+#ifdef CONFIG_MACH_U300_BS335
+/* points out all dma slave channels.
+ * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
+ * Select all channels from A to B, end of list is marked with -1,-1
+ */
+static int dma_slave_channels[] = {
+	U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
+	U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
+
+/* points out all dma memcpy channels. */
+static int dma_memcpy_channels[] = {
+	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
+
+#else /* CONFIG_MACH_U300_BS335 */
+
+static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
+static int dma_memcpy_channels[] = {
+	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
+
+#endif
+
+/** register dma for memory access
+ *
+ * active  1 means dma intends to access memory
+ *         0 means dma wont access memory
+ */
+static void coh901318_access_memory_state(struct device *dev, bool active)
+{
+}
+
+#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
+			COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
+			COH901318_CX_CFG_LCR_DISABLE | \
+			COH901318_CX_CFG_TC_IRQ_ENABLE | \
+			COH901318_CX_CFG_BE_IRQ_ENABLE)
+#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
+			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+			COH901318_CX_CTRL_TCP_DISABLE | \
+			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+			COH901318_CX_CTRL_HSP_DISABLE | \
+			COH901318_CX_CTRL_HSS_DISABLE | \
+			COH901318_CX_CTRL_DDMA_LEGACY | \
+			COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
+			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+			COH901318_CX_CTRL_TCP_DISABLE | \
+			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
+			COH901318_CX_CTRL_HSP_DISABLE | \
+			COH901318_CX_CTRL_HSS_DISABLE | \
+			COH901318_CX_CTRL_DDMA_LEGACY | \
+			COH901318_CX_CTRL_PRDD_SOURCE)
+#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
+			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
+			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
+			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
+			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
+			COH901318_CX_CTRL_TCP_DISABLE | \
+			COH901318_CX_CTRL_TC_IRQ_ENABLE | \
+			COH901318_CX_CTRL_HSP_DISABLE | \
+			COH901318_CX_CTRL_HSS_DISABLE | \
+			COH901318_CX_CTRL_DDMA_LEGACY | \
+			COH901318_CX_CTRL_PRDD_SOURCE)
+
+const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
+	{
+		.number = U300_DMA_MSL_TX_0,
+		.name = "MSL TX 0",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
+	},
+	{
+		.number = U300_DMA_MSL_TX_1,
+		.name = "MSL TX 1",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+	},
+	{
+		.number = U300_DMA_MSL_TX_2,
+		.name = "MSL TX 2",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.desc_nbr_max = 10,
+	},
+	{
+		.number = U300_DMA_MSL_TX_3,
+		.name = "MSL TX 3",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+	},
+	{
+		.number = U300_DMA_MSL_TX_4,
+		.name = "MSL TX 4",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+	},
+	{
+		.number = U300_DMA_MSL_TX_5,
+		.name = "MSL TX 5",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
+	},
+	{
+		.number = U300_DMA_MSL_TX_6,
+		.name = "MSL TX 6",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
+	},
+	{
+		.number = U300_DMA_MSL_RX_0,
+		.name = "MSL RX 0",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
+	},
+	{
+		.number = U300_DMA_MSL_RX_1,
+		.name = "MSL RX 1",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_MSL_RX_2,
+		.name = "MSL RX 2",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_MSL_RX_3,
+		.name = "MSL RX 3",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_MSL_RX_4,
+		.name = "MSL RX 4",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_MSL_RX_5,
+		.name = "MSL RX 5",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_MSL_RX_6,
+		.name = "MSL RX 6",
+		.priority_high = 0,
+		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
+	},
+	{
+		.number = U300_DMA_MMCSD_RX_TX,
+		.name = "MMCSD RX TX",
+		.priority_high = 0,
+		.dev_addr =  U300_MMCSD_BASE + 0x080,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY,
+
+	},
+	{
+		.number = U300_DMA_MSPRO_TX,
+		.name = "MSPRO TX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_MSPRO_RX,
+		.name = "MSPRO RX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_UART0_TX,
+		.name = "UART0 TX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_UART0_RX,
+		.name = "UART0 RX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_APEX_TX,
+		.name = "APEX TX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_APEX_RX,
+		.name = "APEX RX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_PCM_I2S0_TX,
+		.name = "PCM I2S0 TX",
+		.priority_high = 1,
+		.dev_addr = U300_PCM_I2S0_BASE + 0x14,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+	},
+	{
+		.number = U300_DMA_PCM_I2S0_RX,
+		.name = "PCM I2S0 RX",
+		.priority_high = 1,
+		.dev_addr = U300_PCM_I2S0_BASE + 0x10,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_PCM_I2S1_TX,
+		.name = "PCM I2S1 TX",
+		.priority_high = 1,
+		.dev_addr =  U300_PCM_I2S1_BASE + 0x14,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_SOURCE,
+	},
+	{
+		.number = U300_DMA_PCM_I2S1_RX,
+		.name = "PCM I2S1 RX",
+		.priority_high = 1,
+		.dev_addr = U300_PCM_I2S1_BASE + 0x10,
+		.param.config = COH901318_CX_CFG_CH_DISABLE |
+				COH901318_CX_CFG_LCR_DISABLE |
+				COH901318_CX_CFG_TC_IRQ_ENABLE |
+				COH901318_CX_CFG_BE_IRQ_ENABLE,
+		.param.ctrl_lli_chained = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_DISABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_DISABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+		.param.ctrl_lli_last = 0 |
+				COH901318_CX_CTRL_TC_ENABLE |
+				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
+				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
+				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
+				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
+				COH901318_CX_CTRL_MASTER_MODE_M1RW |
+				COH901318_CX_CTRL_TCP_ENABLE |
+				COH901318_CX_CTRL_TC_IRQ_ENABLE |
+				COH901318_CX_CTRL_HSP_ENABLE |
+				COH901318_CX_CTRL_HSS_DISABLE |
+				COH901318_CX_CTRL_DDMA_LEGACY |
+				COH901318_CX_CTRL_PRDD_DEST,
+	},
+	{
+		.number = U300_DMA_XGAM_CDI,
+		.name = "XGAM CDI",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_XGAM_PDI,
+		.name = "XGAM PDI",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_SPI_TX,
+		.name = "SPI TX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_SPI_RX,
+		.name = "SPI RX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_0,
+		.name = "GENERAL 00",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_1,
+		.name = "GENERAL 01",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_2,
+		.name = "GENERAL 02",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_3,
+		.name = "GENERAL 03",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_4,
+		.name = "GENERAL 04",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_5,
+		.name = "GENERAL 05",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_6,
+		.name = "GENERAL 06",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_7,
+		.name = "GENERAL 07",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_8,
+		.name = "GENERAL 08",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.number = U300_DMA_UART1_TX,
+		.name = "UART1 TX",
+		.priority_high = 0,
+	},
+	{
+		.number = U300_DMA_UART1_RX,
+		.name = "UART1 RX",
+		.priority_high = 0,
+	}
+#else
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_9,
+		.name = "GENERAL 09",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	},
+	{
+		.number = U300_DMA_GENERAL_PURPOSE_10,
+		.name = "GENERAL 10",
+		.priority_high = 0,
+
+		.param.config = flags_memcpy_config,
+		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
+		.param.ctrl_lli = flags_memcpy_lli,
+		.param.ctrl_lli_last = flags_memcpy_lli_last,
+	}
+#endif
+};
+
+
+static struct coh901318_platform coh901318_platform = {
+	.chans_slave = dma_slave_channels,
+	.chans_memcpy = dma_memcpy_channels,
+	.access_memory_state = coh901318_access_memory_state,
+	.chan_conf = chan_config,
+	.max_channels = U300_DMA_CHANNELS,
+};
+
 static struct platform_device wdog_device = {
-	.name = "wdog",
+	.name = "coh901327_wdog",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(wdog_resources),
 	.resource = wdog_resources,
@@ -428,11 +1441,23 @@ static struct platform_device ave_device = {
 	.resource = ave_resources,
 };
 
+static struct platform_device dma_device = {
+	.name		= "coh901318",
+	.id		= -1,
+	.resource	= dma_resource,
+	.num_resources  = ARRAY_SIZE(dma_resource),
+	.dev = {
+		.platform_data = &coh901318_platform,
+		.coherent_dma_mask = ~0,
+	},
+};
+
 /*
  * Notice that AMBA devices are initialized before platform devices.
  *
  */
 static struct platform_device *platform_devs[] __initdata = {
+	&dma_device,
 	&i2c0_device,
 	&i2c1_device,
 	&keypad_device,
@@ -571,7 +1596,7 @@ static void __init u300_init_check_chip(void)
 /*
  * Some devices and their resources require reserved physical memory from
  * the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
  */
 static void __init u300_assign_physmem(void)
 {
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 962f9de..5f55012 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -15,6 +15,7 @@
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 /*
  * WARNING! Do not include this pl022-specific controller header
  * for any generic driver. It is only done in this dummy chip
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 0b35826..5f61fd4 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -546,7 +546,7 @@ static void gpio_set_initial_values(void)
 	for (i = 0; i < U300_GPIO_MAX; i++) {
 		val = 0;
 		for (j = 0; j < 8; j++)
-			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP)) << j;
+			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
 		local_irq_save(flags);
 		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
 		local_irq_restore(flags);
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index c73ed06..f0394ba 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,7 +9,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 #include <linux/regulator/machine.h>
 #include <linux/amba/bus.h>
 #include <mach/irqs.h>
@@ -46,6 +46,7 @@
 /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
 #define BUCK_SLEEP_SETTING	0xAC
 
+#ifdef CONFIG_AB3100_CORE
 static struct regulator_consumer_supply supply_ldo_c[] = {
 	{
 		.dev_name = "ab3100-codec",
@@ -253,14 +254,68 @@ static struct ab3100_platform_data ab3100_plf_data = {
 		LDO_D_SETTING,
 	},
 };
+#endif
+
+#ifdef CONFIG_AB3550_CORE
+static struct abx500_init_settings ab3550_init_settings[] = {
+	{
+		.bank = 0,
+		.reg = AB3550_IMR1,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR2,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR3,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR4,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR5,
+		/* The two most significant bits are not used */
+		.setting = 0x3f
+	},
+};
+
+static struct ab3550_platform_data ab3550_plf_data = {
+	.irq = {
+		.base = IRQ_AB3550_BASE,
+		.count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
+	},
+	.dev_data = {
+	},
+	.init_settings = ab3550_init_settings,
+	.init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
+};
+#endif
 
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+#if defined(CONFIG_AB3550_CORE)
+	{
+		.type = "ab3550",
+		.addr = 0x4A,
+		.irq = IRQ_U300_IRQ0_EXT,
+		.platform_data = &ab3550_plf_data,
+	},
+#elif defined(CONFIG_AB3100_CORE)
 	{
 		.type = "ab3100",
 		.addr = 0x48,
 		.irq = IRQ_U300_IRQ0_EXT,
 		.platform_data = &ab3100_plf_data,
 	},
+#else
+	{ },
+#endif
 };
 
 static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index f4cfee9..193da2d 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -53,7 +53,7 @@ struct coh901318_params {
  * struct coh_dma_channel - dma channel base
  * @name: ascii name of dma channel
  * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptortors
+ * @desc_nbr_max: number of preallocated descriptors
  * @priority_high: prio of channel, 0 low otherwise high.
  * @param: configuration parameters
  * @dev_addr: physical address of periphal connected to channel
@@ -103,27 +103,6 @@ struct coh901318_platform {
 };
 
 /**
- * coh901318_get_bytes_left() - Get number of bytes left on a current transfer
- * @chan: dma channel handle
- * return number of bytes left, or negative on error
- */
-u32 coh901318_get_bytes_left(struct dma_chan *chan);
-
-/**
- * coh901318_stop() - Stops dma transfer
- * @chan: dma channel handle
- * return 0 on success otherwise negative value
- */
-void coh901318_stop(struct dma_chan *chan);
-
-/**
- * coh901318_continue() - Resumes a stopped dma transfer
- * @chan: dma channel handle
- * return 0 on success otherwise negative value
- */
-void coh901318_continue(struct dma_chan *chan);
-
-/**
  * coh901318_filter_id() - DMA channel filter function
  * @chan: dma channel handle
  * @chan_id: id of dma channel to be filter out
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..92c1242 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,8 +10,8 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
-	/* If we move the adress using MMU, use this. */
+	.macro	addruart, rx, tmp
+	/* If we move the address using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
 	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/mach-u300/include/mach/dma_channels.h b/arch/arm/mach-u300/include/mach/dma_channels.h
new file mode 100644
index 0000000..b239149
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/dma_channels.h
@@ -0,0 +1,69 @@
+/*
+ *
+ * arch/arm/mach-u300/include/mach/dma_channels.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Map file for the U300 dma driver.
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef DMA_CHANNELS_H
+#define DMA_CHANNELS_H
+
+#define U300_DMA_MSL_TX_0             0
+#define U300_DMA_MSL_TX_1             1
+#define U300_DMA_MSL_TX_2             2
+#define U300_DMA_MSL_TX_3             3
+#define U300_DMA_MSL_TX_4             4
+#define U300_DMA_MSL_TX_5             5
+#define U300_DMA_MSL_TX_6             6
+#define U300_DMA_MSL_RX_0             7
+#define U300_DMA_MSL_RX_1             8
+#define U300_DMA_MSL_RX_2             9
+#define U300_DMA_MSL_RX_3             10
+#define U300_DMA_MSL_RX_4             11
+#define U300_DMA_MSL_RX_5             12
+#define U300_DMA_MSL_RX_6             13
+#define U300_DMA_MMCSD_RX_TX          14
+#define U300_DMA_MSPRO_TX             15
+#define U300_DMA_MSPRO_RX             16
+#define U300_DMA_UART0_TX             17
+#define U300_DMA_UART0_RX             18
+#define U300_DMA_APEX_TX              19
+#define U300_DMA_APEX_RX              20
+#define U300_DMA_PCM_I2S0_TX          21
+#define U300_DMA_PCM_I2S0_RX          22
+#define U300_DMA_PCM_I2S1_TX          23
+#define U300_DMA_PCM_I2S1_RX          24
+#define U300_DMA_XGAM_CDI             25
+#define U300_DMA_XGAM_PDI             26
+#define U300_DMA_SPI_TX               27
+#define U300_DMA_SPI_RX               28
+#define U300_DMA_GENERAL_PURPOSE_0    29
+#define U300_DMA_GENERAL_PURPOSE_1    30
+#define U300_DMA_GENERAL_PURPOSE_2    31
+#define U300_DMA_GENERAL_PURPOSE_3    32
+#define U300_DMA_GENERAL_PURPOSE_4    33
+#define U300_DMA_GENERAL_PURPOSE_5    34
+#define U300_DMA_GENERAL_PURPOSE_6    35
+#define U300_DMA_GENERAL_PURPOSE_7    36
+#define U300_DMA_GENERAL_PURPOSE_8    37
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_UART1_TX             38
+#define U300_DMA_UART1_RX             39
+#else
+#define U300_DMA_GENERAL_PURPOSE_9    38
+#define U300_DMA_GENERAL_PURPOSE_10   39
+#endif
+
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_DMA_DEVICE_CHANNELS      32
+#else
+#define U300_DMA_DEVICE_CHANNELS      30
+#endif
+#define U300_DMA_CHANNELS             40
+
+
+#endif /* DMA_CHANNELS_H */
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index a6867b1..09b1b28 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -109,6 +109,13 @@
 #define U300_NR_IRQS			48
 #endif
 
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE			(U300_NR_IRQS)
+#define IRQ_AB3550_END			(IRQ_AB3550_BASE + 37)
+
+#define NR_IRQS				(IRQ_AB3550_END + 1)
+#else
 #define NR_IRQS U300_NR_IRQS
+#endif
 
 #endif
diff --git a/arch/arm/mach-u300/include/mach/vmalloc.h b/arch/arm/mach-u300/include/mach/vmalloc.h
index b00c51a..ec423b9 100644
--- a/arch/arm/mach-u300/include/mach/vmalloc.h
+++ b/arch/arm/mach-u300/include/mach/vmalloc.h
@@ -9,4 +9,4 @@
  * End must be above the I/O registers and on an even 2MiB boundary.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
-#define VMALLOC_END	0xfe800000
+#define VMALLOC_END	0xfe800000UL
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 109f5a6..88506d0 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/amba/mmci.h>
+#include <linux/slab.h>
 
 #include "mmc.h"
 #include "padmux.h"
@@ -101,11 +102,12 @@ int __devinit mmc_init(struct amba_device *adev)
 	 * we have a regulator we can control instead.
 	 */
 	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.f_max = 24000000;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
 	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
-		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 03625d7..6625e5b 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,15 +1,42 @@
-menu "ST-Ericsson platform type"
-	depends on ARCH_U8500
+if ARCH_U8500
 
-comment "ST-Ericsson Multicore Mobile Platforms"
-
-config MACH_U8500_MOP
-	bool "U8500 Early Development platform"
+config UX500_SOC_COMMON
+	bool
 	default y
 	select ARM_GIC
 	select HAS_MTU
+	select NOMADIK_GPIO
+
+config UX500_SOC_DB8500
+	bool
+
+config UX500_SOC_DB5500
+	bool
+
+choice
+	prompt "Ux500 target platform"
+	default MACH_U8500_MOP
+
+config MACH_U8500_MOP
+	bool "U8500 Development platform"
+	select UX500_SOC_DB8500
 	help
 	  Include support for mop500 development platform
 	  based on U8500 architecture. The platform is based
 	  on early drop silicon version of 8500.
-endmenu
+
+config MACH_U5500
+	bool "U5500 Development platform"
+	select UX500_SOC_DB5500
+	help
+	  Include support for the U5500 development platform.
+endchoice
+
+config UX500_DEBUG_UART
+	int "Ux500 UART to use for low-level debug"
+	default 2
+	help
+	  Choose the UART on which kernel low-level debug messages should be
+	  output.
+
+endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 95e6e24..4556aea 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,10 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= clock.o
-obj-$(CONFIG_ARCH_U8500)	+= cpu-u8500.o
+obj-y				:= clock.o cpu.o devices.o
+obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index aa5afbc..bb8d7b7 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -17,36 +17,14 @@
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
 
-#include <asm/localtimer.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/mtu.h>
+#include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
-
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-/* These are active devices on this board */
-static struct amba_device uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(U8500_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(U8500_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
-
-static struct amba_device uart2_device = {
-	.dev = { .init_name = "uart2" },
-	__MEM_4K_RESOURCE(U8500_UART2_BASE),
-	.irq = {IRQ_UART2, NO_IRQ},
-};
+#include <mach/devices.h>
 
 static void ab4500_spi_cs_control(u32 command)
 {
@@ -72,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = {
 
 static struct spi_board_info u8500_spi_devices[] = {
 	{
-		.modalias = "ab4500",
+		.modalias = "ab8500",
 		.controller_data = &ab4500_chip_info,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
@@ -92,53 +70,67 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static struct amba_device pl022_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "pl022",
-		.platform_data = &ssp0_platform_data,
-	},
-	.res = {
-		.start = U8500_SSP0_BASE,
-		.end   = U8500_SSP0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_SSP0, NO_IRQ },
-	/* ST-Ericsson modified id */
-	.periphid = SSP_PER_ID,
-};
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
+	/*				\
+	 * slave data setup time, which is	\
+	 * 250 ns,100ns,10ns which is 14,6,2	\
+	 * respectively for a 48 Mhz	\
+	 * i2c clock			\
+	 */				\
+	.slsu		= _slsu,	\
+	/* Tx FIFO threshold */		\
+	.tft		= _tft,		\
+	/* Rx FIFO threshold */		\
+	.rft		= _rft,		\
+	/* std. mode operation */	\
+	.clk_freq	= clk,		\
+	.sm		= _sm,		\
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(2,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(3,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 
 static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&pl022_device,
+	&ux500_uart0_device,
+	&ux500_uart1_device,
+	&ux500_uart2_device,
+	&u8500_ssp0_device,
 };
 
-static void __init u8500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
-	/* Setup the local timer base */
-	twd_base = __io_address(U8500_TWD_BASE);
-#endif
-	/* Setup the MTU base */
-	mtu_base = __io_address(U8500_MTU0_BASE);
-
-	nmdk_timer_init();
-}
-
-static struct sys_timer u8500_timer = {
-	.init	= u8500_timer_init,
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+	&u8500_i2c0_device,
+	&ux500_i2c1_device,
+	&ux500_i2c2_device,
+	&ux500_i2c3_device,
 };
 
 static void __init u8500_init_machine(void)
 {
 	int i;
 
+	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
+	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
+	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
+	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+
+	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
+
 	/* Register the active AMBA devices on this board */
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
 
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
 	spi_register_board_info(u8500_spi_devices,
 			ARRAY_SIZE(u8500_spi_devices));
 
@@ -151,8 +143,8 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= u8500_map_io,
-	.init_irq	= u8500_init_irq,
+	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &u8500_timer,
+	.timer		= &ux500_timer,
 	.init_machine	= u8500_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
new file mode 100644
index 0000000..4430e69
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct amba_device *amba_board_devs[] __initdata = {
+	&ux500_uart0_device,
+	&ux500_uart1_device,
+	&ux500_uart2_device,
+};
+
+static void __init u5500_init_machine(void)
+{
+	u5500_init_devices();
+
+	amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+}
+
+MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+	.phys_io	= UX500_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= u5500_map_io,
+	.init_irq	= ux500_init_irq,
+	.timer		= &ux500_timer,
+	.init_machine	= u5500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 20b6ebb..0a1318f 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2009 ST-Ericsson
- * 	heavily based on realview platform
+ *  Copyright (C) 2009 STMicroelectronics
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,33 +12,219 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/mutex.h>
+#include <linux/io.h>
 
 #include <asm/clkdev.h>
 
-/* currently the clk structure
- * just supports rate. This would
- * be extended as and when new devices are
- * added - TODO
- */
-struct clk {
-	unsigned long		rate;
-};
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include "clock.h"
+
+#define PRCC_PCKEN		0x00
+#define PRCC_PCKDIS		0x04
+#define PRCC_KCKEN		0x08
+#define PRCC_KCKDIS		0x0C
+
+#define PRCM_YYCLKEN0_MGT_SET	0x510
+#define PRCM_YYCLKEN1_MGT_SET	0x514
+#define PRCM_YYCLKEN0_MGT_CLR	0x518
+#define PRCM_YYCLKEN1_MGT_CLR	0x51C
+#define PRCM_YYCLKEN0_MGT_VAL	0x520
+#define PRCM_YYCLKEN1_MGT_VAL	0x524
+
+#define PRCM_SVAMMDSPCLK_MGT	0x008
+#define PRCM_SIAMMDSPCLK_MGT	0x00C
+#define PRCM_SGACLK_MGT		0x014
+#define PRCM_UARTCLK_MGT	0x018
+#define PRCM_MSP02CLK_MGT	0x01C
+#define PRCM_MSP1CLK_MGT	0x288
+#define PRCM_I2CCLK_MGT		0x020
+#define PRCM_SDMMCCLK_MGT	0x024
+#define PRCM_SLIMCLK_MGT	0x028
+#define PRCM_PER1CLK_MGT	0x02C
+#define PRCM_PER2CLK_MGT	0x030
+#define PRCM_PER3CLK_MGT	0x034
+#define PRCM_PER5CLK_MGT	0x038
+#define PRCM_PER6CLK_MGT	0x03C
+#define PRCM_PER7CLK_MGT	0x040
+#define PRCM_LCDCLK_MGT		0x044
+#define PRCM_BMLCLK_MGT		0x04C
+#define PRCM_HSITXCLK_MGT	0x050
+#define PRCM_HSIRXCLK_MGT	0x054
+#define PRCM_HDMICLK_MGT	0x058
+#define PRCM_APEATCLK_MGT	0x05C
+#define PRCM_APETRACECLK_MGT	0x060
+#define PRCM_MCDECLK_MGT	0x064
+#define PRCM_IPI2CCLK_MGT	0x068
+#define PRCM_DSIALTCLK_MGT	0x06C
+#define PRCM_DMACLK_MGT		0x074
+#define PRCM_B2R2CLK_MGT	0x078
+#define PRCM_TVCLK_MGT		0x07C
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_STOPPED	(1 << 16)
+#define PRCM_TCR_DOZE_MODE	(1 << 17)
+#define PRCM_UNIPROCLK_MGT	0x278
+#define PRCM_SSPCLK_MGT		0x280
+#define PRCM_RNGCLK_MGT		0x284
+#define PRCM_UICCCLK_MGT	0x27C
+
+#define PRCM_MGT_ENABLE		(1 << 8)
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (clk->enabled++ == 0) {
+		if (clk->parent_cluster)
+			__clk_enable(clk->parent_cluster);
+
+		if (clk->parent_periph)
+			__clk_enable(clk->parent_periph);
+
+		if (clk->ops && clk->ops->enable)
+			clk->ops->enable(clk);
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
+static void __clk_disable(struct clk *clk)
+{
+	if (--clk->enabled == 0) {
+		if (clk->ops && clk->ops->disable)
+			clk->ops->disable(clk);
+
+		if (clk->parent_periph)
+			__clk_disable(clk->parent_periph);
+
+		if (clk->parent_cluster)
+			__clk_disable(clk->parent_cluster);
+	}
+}
+
 void clk_disable(struct clk *clk)
 {
+	unsigned long flags;
+
+	WARN_ON(!clk->enabled);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+		+ PRCM_TCR;
+	u32 tcr = readl(addr);
+	int mtu = (int) clk->data;
+	/*
+	 * One of these is selected eventually
+	 * TODO: Replace the constant with a reference
+	 * to the ULP source once this is modeled.
+	 */
+	unsigned long clk32k = 32768;
+	unsigned long mturate;
+	unsigned long retclk;
+
+	/* Get the rate from the parent as a default */
+	if (clk->parent_periph)
+		mturate = clk_get_rate(clk->parent_periph);
+	else if (clk->parent_cluster)
+		mturate = clk_get_rate(clk->parent_cluster);
+	else
+		/* We need to be connected SOMEWHERE */
+		BUG();
+
+	/*
+	 * Are we in doze mode?
+	 * In this mode the parent peripheral or the fixed 32768 Hz
+	 * clock is fed into the block.
+	 */
+	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+		/*
+		 * Here we're using the clock input from the APE ULP
+		 * clock domain. But first: are the timers stopped?
+		 */
+		if (tcr & PRCM_TCR_STOPPED) {
+			clk32k = 0;
+			mturate = 0;
+		} else {
+			/* Else default mode: 0 and 2.4 MHz */
+			clk32k = 0;
+			if (cpu_is_u5500())
+				/* DB5500 divides by 8 */
+				mturate /= 8;
+			else if (cpu_is_u8500ed()) {
+				/*
+				 * This clocking setting must not be used
+				 * in the ED chip, it is simply not
+				 * connected anywhere!
+				 */
+				mturate = 0;
+				BUG();
+			} else
+				/*
+				 * In this mode the ulp38m4 clock is divided
+				 * by a factor 16, on the DB8500 typically
+				 * 38400000 / 16 ~ 2.4 MHz.
+				 * TODO: Replace the constant with a reference
+				 * to the ULP source once this is modeled.
+				 */
+				mturate = 38400000 / 16;
+		}
+	}
+
+	/* Return the clock selected for this MTU */
+	if (tcr & (1 << mtu))
+		retclk = clk32k;
+	else
+		retclk = mturate;
+
+	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+	return retclk;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return clk->rate;
+	unsigned long rate;
+
+	/*
+	 * If there is a custom getrate callback for this clock,
+	 * it will take precedence.
+	 */
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	if (clk->ops && clk->ops->get_rate)
+		return clk->ops->get_rate(clk);
+
+	rate = clk->rate;
+	if (!rate) {
+		if (clk->parent_periph)
+			rate = clk_get_rate(clk->parent_periph);
+		else if (clk->parent_cluster)
+			rate = clk_get_rate(clk->parent_cluster);
+	}
+
+	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -56,40 +242,376 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL(clk_set_rate);
 
-/* ssp clock */
-static struct clk ssp_clk = {
-	.rate = 48000000,
+static void clk_prcmu_enable(struct clk *clk)
+{
+	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+				   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+
+	writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+
+static void clk_prcmu_disable(struct clk *clk)
+{
+	void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+				   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+
+	writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+
+/* ED doesn't have the combined set/clr registers */
+static void clk_prcmu_ed_enable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+			     + clk->prcmu_cg_mgt;
+
+	writel(readl(addr) | PRCM_MGT_ENABLE, addr);
+}
+
+static void clk_prcmu_ed_disable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+			     + clk->prcmu_cg_mgt;
+
+	writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
+}
+
+static struct clkops clk_prcmu_ops = {
+	.enable = clk_prcmu_enable,
+	.disable = clk_prcmu_disable,
 };
 
-/* fixed clock */
-static struct clk f38_clk = {
-	.rate = 38400000,
+static unsigned int clkrst_base[] = {
+	[1] = U8500_CLKRST1_BASE,
+	[2] = U8500_CLKRST2_BASE,
+	[3] = U8500_CLKRST3_BASE,
+	[5] = U8500_CLKRST5_BASE,
+	[6] = U8500_CLKRST6_BASE,
+	[7] = U8500_CLKRST7_BASE_ED,
 };
 
-static struct clk_lookup lookups[] = {
-	{
-		/* UART0 */
-		.dev_id		= "uart0",
-		.clk		= &f38_clk,
-	}, {	/* UART1 */
-		.dev_id		= "uart1",
-		.clk		= &f38_clk,
-	}, {	/* UART2 */
-		.dev_id		= "uart2",
-		.clk		= &f38_clk,
-	}, {	/* SSP */
-		.dev_id		= "pl022",
-		.clk		= &ssp_clk,
-	}
+static void clk_prcc_enable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+	if (clk->prcc_kernel != -1)
+		writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
+
+	if (clk->prcc_bus != -1)
+		writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
+}
+
+static void clk_prcc_disable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+	if (clk->prcc_bus != -1)
+		writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+
+	if (clk->prcc_kernel != -1)
+		writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+
+static struct clkops clk_prcc_ops = {
+	.enable = clk_prcc_enable,
+	.disable = clk_prcc_disable,
+};
+
+static struct clk clk_32khz = {
+	.rate = 32000,
+};
+
+/*
+ * PRCMU level clock gating
+ */
+
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk,		0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk,		0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk,		0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk,	0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk,	0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk,	0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK_RATE(per7clk,	0x0, 16, PER7CLK, 100000000);
+static DEFINE_PRCMU_CLK(lcdclk,		0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk,		0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk,	0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk,	0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk,	0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk,	0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk,	0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk,	0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk,	0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk,	0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk,		0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk,	0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk,		0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk,	0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk,	0x0, 31, SSPCLK, 48000000); /* v1 */
+
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk,		0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
+
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4, 	10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0, 	8,  8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed, 	7,  7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1, 	7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 	6,  6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1_ed, 	4,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1, 	4,  4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 	3,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 	2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 	1,  1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 	0,  0, &clk_uartclk);
+
+/* Peripheral Cluster #2 */
+
+static DEFINE_PRCC_CLK(2, gpio1_ed,	12, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_ed, 	11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed, 	10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed, 	 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed, 	 8,  6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed, 	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed, 	 6,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_ed,	 3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_ed, 	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed, 	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed, 	 0,  0, &clk_i2cclk);
+
+static DEFINE_PRCC_CLK(2, gpio1_v1,	11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_v1, 	10,  7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1, 	 9,  6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1, 	 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1, 	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1, 	 6,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1, 	 5,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_v1,	 3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_v1, 	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1, 	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1, 	 0,  0, &clk_i2cclk);
+
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2, 	8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 	7,  7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 	6,  6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 		5,  5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 	4,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 	3,  3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed, 	2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed, 	1,  1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1, 	2,  2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1, 	1,  1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 	0, -1, NULL);
+
+/* Peripheral Cluster #4 is in the always on domain */
+
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed, 	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1, 	0,  0, NULL);
+
+/* Peripheral Cluster #6 */
+
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1, 	4,  1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed, 	4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka, 		3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 	2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed, 	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1, 	0,  0, &clk_rngclk);
+
+/* Peripheral Cluster #7 */
+
+static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
+
+static struct clk_lookup u8500_common_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(gpio0,	"gpio.0",	NULL),
+	CLK(gpio0,	"gpio.1",	NULL),
+	CLK(slimbus0,	"slimbus0",	NULL),
+	CLK(i2c2,	"nmk-i2c.2",	NULL),
+	CLK(sdi0,	"sdi0",		NULL),
+	CLK(msp0,	"msp0",		NULL),
+	CLK(i2c1,	"nmk-i2c.1",	NULL),
+	CLK(uart1,	"uart1",	NULL),
+	CLK(uart0,	"uart0",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(gpio2,	"gpio.2",	NULL),
+	CLK(gpio2,	"gpio.3",	NULL),
+	CLK(gpio2,	"gpio.4",	NULL),
+	CLK(gpio2,	"gpio.5",	NULL),
+	CLK(sdi5,	"sdi5",		NULL),
+	CLK(uart2,	"uart2",	NULL),
+	CLK(ske,	"ske",		NULL),
+	CLK(sdi2,	"sdi2",		NULL),
+	CLK(i2c0,	"nmk-i2c.0",	NULL),
+	CLK(fsmc,	"fsmc",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(gpio3,	"gpio.8",	NULL),
+
+	/* Peripheral Cluster #6 */
+	CLK(hash1,	"hash1",	NULL),
+	CLK(pka,	"pka",		NULL),
+	CLK(hash0,	"hash0",	NULL),
+	CLK(cryp0,	"cryp0",	NULL),
+
+	/* PRCMU level clock gating */
+
+	/* Bank 0 */
+	CLK(svaclk,	"sva",		NULL),
+	CLK(siaclk,	"sia",		NULL),
+	CLK(sgaclk,	"sga",		NULL),
+	CLK(slimclk,	"slim",		NULL),
+	CLK(lcdclk,	"lcd",		NULL),
+	CLK(bmlclk,	"bml",		NULL),
+	CLK(hsitxclk,	"stm-hsi.0",	NULL),
+	CLK(hsirxclk,	"stm-hsi.1",	NULL),
+	CLK(hdmiclk,	"hdmi",		NULL),
+	CLK(apeatclk,	"apeat",	NULL),
+	CLK(apetraceclk,	"apetrace",	NULL),
+	CLK(mcdeclk,	"mcde",		NULL),
+	CLK(ipi2clk,	"ipi2",		NULL),
+	CLK(dmaclk,	"dma40.0",	NULL),
+	CLK(b2r2clk,	"b2r2",		NULL),
+	CLK(tvclk,	"tv",		NULL),
+};
+
+static struct clk_lookup u8500_ed_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(spi3_ed,	"spi3",		NULL),
+	CLK(msp1_ed,	"msp1",		NULL),
+
+	/* Peripheral Cluster #2 */
+	CLK(gpio1_ed,	"gpio.6",	NULL),
+	CLK(gpio1_ed,	"gpio.7",	NULL),
+	CLK(ssitx_ed,	"ssitx",	NULL),
+	CLK(ssirx_ed,	"ssirx",	NULL),
+	CLK(spi0_ed,	"spi0",		NULL),
+	CLK(sdi3_ed,	"sdi3",		NULL),
+	CLK(sdi1_ed,	"sdi1",		NULL),
+	CLK(msp2_ed,	"msp2",		NULL),
+	CLK(sdi4_ed,	"sdi4",		NULL),
+	CLK(pwl_ed,	"pwl",		NULL),
+	CLK(spi1_ed,	"spi1",		NULL),
+	CLK(spi2_ed,	"spi2",		NULL),
+	CLK(i2c3_ed,	"nmk-i2c.3",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(ssp1_ed,	"ssp1",		NULL),
+	CLK(ssp0_ed,	"ssp0",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(usb_ed,	"musb_hdrc.0",	"usb"),
+
+	/* Peripheral Cluster #6 */
+	CLK(dmc_ed,	"dmc",		NULL),
+	CLK(cryp1_ed,	"cryp1",	NULL),
+	CLK(rng_ed,	"rng",		NULL),
+
+	/* Peripheral Cluster #7 */
+	CLK(tzpc0_ed,	"tzpc0",	NULL),
+	CLK(mtu1_ed,	"mtu1",		NULL),
+	CLK(mtu0_ed,	"mtu0",		NULL),
+	CLK(wdg_ed,	"wdg",		NULL),
+	CLK(cfgreg_ed,	"cfgreg",	NULL),
+};
+
+static struct clk_lookup u8500_v1_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(i2c4,	"nmk-i2c.4", 	NULL),
+	CLK(spi3_v1,	"spi3",		NULL),
+	CLK(msp1_v1,	"msp1",		NULL),
+
+	/* Peripheral Cluster #2 */
+	CLK(gpio1_v1,	"gpio.6",	NULL),
+	CLK(gpio1_v1,	"gpio.7",	NULL),
+	CLK(ssitx_v1,	"ssitx",	NULL),
+	CLK(ssirx_v1,	"ssirx",	NULL),
+	CLK(spi0_v1,	"spi0",		NULL),
+	CLK(sdi3_v1,	"sdi3",		NULL),
+	CLK(sdi1_v1,	"sdi1",		NULL),
+	CLK(msp2_v1,	"msp2",		NULL),
+	CLK(sdi4_v1,	"sdi4",		NULL),
+	CLK(pwl_v1,	"pwl",		NULL),
+	CLK(spi1_v1,	"spi1",		NULL),
+	CLK(spi2_v1,	"spi2",		NULL),
+	CLK(i2c3_v1,	"nmk-i2c.3",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(ssp1_v1,	"ssp1",		NULL),
+	CLK(ssp0_v1,	"ssp0",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(usb_v1,	"musb_hdrc.0",	"usb"),
+
+	/* Peripheral Cluster #6 */
+	CLK(mtu1_v1,	"mtu1",		NULL),
+	CLK(mtu0_v1,	"mtu0",		NULL),
+	CLK(cfgreg_v1,	"cfgreg",	NULL),
+	CLK(hash1,	"hash1",	NULL),
+	CLK(unipro_v1,	"unipro",	NULL),
+	CLK(rng_v1,	"rng",		NULL),
+
+	/* PRCMU level clock gating */
+
+	/* Bank 0 */
+	CLK(uniproclk,	"uniproclk",	NULL),
+	CLK(dsialtclk,	"dsialt",	NULL),
+
+	/* Bank 1 */
+	CLK(rngclk,	"rng",		NULL),
+	CLK(uiccclk,	"uicc",		NULL),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
-	int i;
+	if (cpu_is_u8500ed()) {
+		clk_prcmu_ops.enable = clk_prcmu_ed_enable;
+		clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+		clk_per6clk.rate = 100000000;
+	} else if (cpu_is_u5500()) {
+		/* Clock tree for U5500 not implemented yet */
+		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
+		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+		clk_per6clk.rate = 26000000;
+	}
+
+	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+	if (cpu_is_u8500ed())
+		clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+	else
+		clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
 
-	/* register the clock lookups */
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
 	return 0;
 }
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
new file mode 100644
index 0000000..a058025
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.h
@@ -0,0 +1,147 @@
+/*
+ *  Copyright (C) 2010 ST-Ericsson
+ *  Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct clkops - ux500 clock operations
+ * @enable:	function to enable the clock
+ * @disable:	function to disable the clock
+ * @get_rate:	function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock.  All of these functions are optional.  If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+	unsigned long (*get_rate) (struct clk *);
+};
+
+/**
+ * struct clk - ux500 clock structure
+ * @ops:		pointer to clkops struct used to control this clock
+ * @name:		name, for debugging
+ * @enabled:		refcount. positive if enabled, zero if disabled
+ * @get_rate:		custom callback for getting the clock rate
+ * @data:		custom per-clock data for example for the get_rate
+ *			callback
+ * @rate:		fixed rate for clocks which don't implement
+ * 			ops->getrate
+ * @prcmu_cg_off:	address offset of the combined enable/disable register
+ * 			(used on u8500v1)
+ * @prcmu_cg_bit:	bit in the combined enable/disable register (used on
+ * 			u8500v1)
+ * @prcmu_cg_mgt:	address of the enable/disable register (used on
+ * 			u8500ed)
+ * @cluster:		peripheral cluster number
+ * @prcc_bus:		bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel:	bit for the kernel clock in the peripheral's CLKRST.
+ * 			-1 if no kernel clock exists.
+ * @parent_cluster:	pointer to parent's cluster clk struct
+ * @parent_periph:	pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock.  Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ * 	(1) the parent cluster (bus) clock at the PRCMU level
+ * 	(2) the parent peripheral clock (if any) at the PRCMU level
+ * 	(3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+	const struct clkops	*ops;
+	const char 		*name;
+	unsigned int		enabled;
+	unsigned long		(*get_rate)(struct clk *);
+	void			*data;
+
+	unsigned long		rate;
+	struct list_head	list;
+
+	/* These three are only for PRCMU clks */
+
+	unsigned int		prcmu_cg_off;
+	unsigned int		prcmu_cg_bit;
+	unsigned int		prcmu_cg_mgt;
+
+	/* The rest are only for PRCC clks */
+
+	int			cluster;
+	unsigned int		prcc_bus;
+	unsigned int		prcc_kernel;
+
+	struct clk		*parent_cluster;
+	struct clk		*parent_periph;
+};
+
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
+struct clk clk_##_name = {					\
+		.name		= #_name,			\
+		.ops    	= &clk_prcmu_ops, 		\
+		.prcmu_cg_off	= _cg_off, 			\
+		.prcmu_cg_bit	= _cg_bit,			\
+		.prcmu_cg_mgt	= PRCM_##_reg##_MGT		\
+	}
+
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)	\
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops    	= &clk_prcmu_ops, 			\
+		.prcmu_cg_off	= _cg_off, 				\
+		.prcmu_cg_bit	= _cg_bit,				\
+		.rate		= _rate,				\
+		.prcmu_cg_mgt	= PRCM_##_reg##_MGT			\
+	}
+
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)	\
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops    	= &clk_prcc_ops, 			\
+		.cluster 	= _pclust,				\
+		.prcc_bus 	= _bus_en, 				\
+		.prcc_kernel 	= _kernel_en, 				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph 	= _kernclk				\
+	}
+
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops		= &clk_prcc_ops,			\
+		.cluster	= _pclust,				\
+		.prcc_bus	= _bus_en,				\
+		.prcc_kernel	= _kernel_en,				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph	= _kernclk,				\
+		.get_rate	= _callback,				\
+		.data		= (void *) _data			\
+	}
+
+
+#define CLK(_clk, _devname, _conname)			\
+	{						\
+		.clk	= &clk_##_clk,			\
+		.dev_id	= _devname,			\
+		.con_id = _conname,			\
+	}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
new file mode 100644
index 0000000..e9278f6
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct map_desc u5500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+};
+
+static struct platform_device *u5500_platform_devs[] __initdata = {
+	&u5500_gpio_devs[0],
+	&u5500_gpio_devs[1],
+	&u5500_gpio_devs[2],
+	&u5500_gpio_devs[3],
+	&u5500_gpio_devs[4],
+	&u5500_gpio_devs[5],
+	&u5500_gpio_devs[6],
+	&u5500_gpio_devs[7],
+};
+
+void __init u5500_map_io(void)
+{
+	ux500_map_io();
+
+	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+}
+
+void __init u5500_init_devices(void)
+{
+	ux500_init_devices();
+
+	platform_add_devices(u5500_platform_devs,
+			     ARRAY_SIZE(u5500_platform_devs));
+}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
new file mode 100644
index 0000000..f21c444
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+static struct platform_device *platform_devs[] __initdata = {
+	&u8500_gpio_devs[0],
+	&u8500_gpio_devs[1],
+	&u8500_gpio_devs[2],
+	&u8500_gpio_devs[3],
+	&u8500_gpio_devs[4],
+	&u8500_gpio_devs[5],
+	&u8500_gpio_devs[6],
+	&u8500_gpio_devs[7],
+	&u8500_gpio_devs[8],
+	&u8500_dma40_device,
+};
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+};
+
+static struct map_desc u8500ed_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
+	__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
+};
+
+static struct map_desc u8500v1_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+};
+
+void __init u8500_map_io(void)
+{
+	ux500_map_io();
+
+	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+
+	if (cpu_is_u8500ed())
+		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
+	else
+		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+	ux500_init_devices();
+
+	if (cpu_is_u8500ed())
+		dma40_u8500ed_fixup();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+	return ;
+}
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
deleted file mode 100644
index 5f05e58..0000000
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
-	/* yet to be added, add i2c0, gpio.. */
-};
-
-#define __IO_DEV_DESC(x, sz)	{		\
-	.virtual	= IO_ADDRESS(x),	\
-	.pfn		= __phys_to_pfn(x),	\
-	.length		= sz,			\
-	.type		= MT_DEVICE,		\
-}
-
-/* minimum static i/o mapping required to boot U8500 platforms */
-static struct map_desc u8500_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
-};
-
-void __init u8500_map_io(void)
-{
-	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-}
-
-void __init u8500_init_irq(void)
-{
-	gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
-}
-
-/*
- * This function is called from the board init
- */
-void __init u8500_init_devices(void)
-{
-	/* Register the platform devices */
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return ;
-}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
new file mode 100644
index 0000000..e0fd747
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+#include "clock.h"
+
+static struct map_desc ux500_io_desc[] __initdata = {
+	__IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+static struct amba_device *ux500_amba_devs[] __initdata = {
+	&ux500_pl031_device,
+};
+
+void __init ux500_map_io(void)
+{
+	iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
+}
+
+void __init ux500_init_devices(void)
+{
+	amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
+}
+
+void __init ux500_init_irq(void)
+{
+	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int ux500_l2x0_init(void)
+{
+	void __iomem *l2x0_base;
+
+	l2x0_base = __io_address(UX500_L2CC_BASE);
+
+	/* 64KB way size, 8 way associativity, force WA */
+	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+	return 0;
+}
+early_initcall(ux500_l2x0_init);
+#endif
+
+static void __init ux500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Setup the local timer base */
+	twd_base = __io_address(UX500_TWD_BASE);
+#endif
+	/* Setup the MTU base */
+	if (cpu_is_u8500ed())
+		mtu_base = __io_address(U8500_MTU0_BASE_ED);
+	else
+		mtu_base = __io_address(UX500_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+struct sys_timer ux500_timer = {
+	.init	= ux500_timer_init,
+};
diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c
new file mode 100644
index 0000000..33e5b56
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+
+static struct nmk_gpio_platform_data u5500_gpio_data[] = {
+	GPIO_DATA("GPIO-0-31", 0),
+	GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
+	GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
+	GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
+	GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
+	GPIO_DATA("GPIO-160-191", 160),
+	GPIO_DATA("GPIO-192-223", 192),
+	GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
+};
+
+static struct resource u5500_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+	GPIO_RESOURCE(4),
+	GPIO_RESOURCE(5),
+	GPIO_RESOURCE(6),
+	GPIO_RESOURCE(7),
+};
+
+struct platform_device u5500_gpio_devs[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
+	GPIO_DEVICE(4),
+	GPIO_DEVICE(5),
+	GPIO_DEVICE(6),
+	GPIO_DEVICE(7),
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
new file mode 100644
index 0000000..8229034
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+
+#include <plat/ste_dma40.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#include "ste-dma40-db8500.h"
+
+static struct nmk_gpio_platform_data u8500_gpio_data[] = {
+	GPIO_DATA("GPIO-0-31", 0),
+	GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
+	GPIO_DATA("GPIO-64-95", 64),
+	GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
+	GPIO_DATA("GPIO-128-159", 128),
+	GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
+	GPIO_DATA("GPIO-192-223", 192),
+	GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
+	GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
+};
+
+static struct resource u8500_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+	GPIO_RESOURCE(4),
+	GPIO_RESOURCE(5),
+	GPIO_RESOURCE(6),
+	GPIO_RESOURCE(7),
+	GPIO_RESOURCE(8),
+};
+
+struct platform_device u8500_gpio_devs[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
+	GPIO_DEVICE(4),
+	GPIO_DEVICE(5),
+	GPIO_DEVICE(6),
+	GPIO_DEVICE(7),
+	GPIO_DEVICE(8),
+};
+
+struct amba_device u8500_ssp0_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "ssp0",
+	},
+	.res = {
+		.start = U8500_SSP0_BASE,
+		.end   = U8500_SSP0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_SSP0, NO_IRQ },
+	/* ST-Ericsson modified id */
+	.periphid = SSP_PER_ID,
+};
+
+static struct resource u8500_i2c0_resources[] = {
+	[0] = {
+		.start	= U8500_I2C0_BASE,
+		.end	= U8500_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_I2C0,
+		.end	= IRQ_I2C0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device u8500_i2c0_device = {
+	.name		= "nmk-i2c",
+	.id		= 0,
+	.resource	= u8500_i2c0_resources,
+	.num_resources	= ARRAY_SIZE(u8500_i2c0_resources),
+};
+
+static struct resource u8500_i2c4_resources[] = {
+	[0] = {
+		.start	= U8500_I2C4_BASE,
+		.end	= U8500_I2C4_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_I2C4,
+		.end	= IRQ_I2C4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device u8500_i2c4_device = {
+	.name		= "nmk-i2c",
+	.id		= 4,
+	.resource	= u8500_i2c4_resources,
+	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
+};
+
+static struct resource dma40_resources[] = {
+	[0] = {
+		.start = U8500_DMA_BASE,
+		.end = U8500_DMA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "base",
+	},
+	[1] = {
+		.start = U8500_DMA_LCPA_BASE,
+		.end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "lcpa",
+	},
+	[2] = {
+		.start = U8500_DMA_LCLA_BASE,
+		.end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "lcla",
+	},
+	[3] = {
+		.start = IRQ_DMA,
+		.end = IRQ_DMA,
+		.flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+	.channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+			 STEDMA40_LOW_PRIORITY_CHANNEL |
+			 STEDMA40_PCHAN_BASIC_MODE),
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+	.channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+			 STEDMA40_LOW_PRIORITY_CHANNEL |
+			 STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+			 STEDMA40_NO_TIM_FOR_LINK),
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+	STEDMA40_MEMCPY_TX_1,
+	STEDMA40_MEMCPY_TX_2,
+	STEDMA40_MEMCPY_TX_3,
+	STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+	.dev_len = STEDMA40_NR_DEV,
+	.dev_rx = dma40_rx_map,
+	.dev_tx = dma40_tx_map,
+	.memcpy = dma40_memcpy_event,
+	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
+	.memcpy_conf_log = &dma40_memcpy_conf_log,
+	.llis_per_log = 8,
+};
+
+struct platform_device u8500_dma40_device = {
+	.dev = {
+		.platform_data = &dma40_plat_data,
+	},
+	.name = "dma40",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dma40_resources),
+	.resource = dma40_resources
+};
+
+void dma40_u8500ed_fixup(void)
+{
+	dma40_plat_data.memcpy = NULL;
+	dma40_plat_data.memcpy_len = 0;
+	dma40_resources[0].start = U8500_DMA_BASE_ED;
+	dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
new file mode 100644
index 0000000..8a26889
--- /dev/null
+++ b/arch/arm/mach-ux500/devices.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+struct amba_device ux500_pl031_device = {
+	.dev = {
+		.init_name = "pl031",
+	},
+	.res = {
+		.start	= UX500_RTC_BASE,
+		.end	= UX500_RTC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+struct amba_device ux500_uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(UX500_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+struct amba_device ux500_uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(UX500_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+struct amba_device ux500_uart2_device = {
+	.dev = { .init_name = "uart2" },
+	__MEM_4K_RESOURCE(UX500_UART2_BASE),
+	.irq = {IRQ_UART2, NO_IRQ},
+};
+
+#define UX500_I2C_RESOURCES(id, size)				\
+static struct resource ux500_i2c##id##_resources[] = {		\
+	[0] = {							\
+		.start	= UX500_I2C##id##_BASE,			\
+		.end	= UX500_I2C##id##_BASE + size - 1,	\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	[1] = {							\
+		.start	= IRQ_I2C##id,				\
+		.end	= IRQ_I2C##id,				\
+		.flags	= IORESOURCE_IRQ			\
+	}							\
+}
+
+UX500_I2C_RESOURCES(1, SZ_4K);
+UX500_I2C_RESOURCES(2, SZ_4K);
+UX500_I2C_RESOURCES(3, SZ_4K);
+
+#define UX500_I2C_PDEVICE(cid)					\
+struct platform_device ux500_i2c##cid##_device = {		\
+	.name		= "nmk-i2c",				\
+	.id		= cid,					\
+	.num_resources	= 2,					\
+	.resource	= ux500_i2c##cid##_resources,		\
+}
+
+UX500_I2C_PDEVICE(1);
+UX500_I2C_PDEVICE(2);
+UX500_I2C_PDEVICE(3);
+
+void __init amba_add_devices(struct amba_device *devs[], int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		struct amba_device *d = devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
new file mode 100644
index 0000000..545c80f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+
+#define U5500_PER1_BASE		0xA0020000
+#define U5500_PER2_BASE		0xA0010000
+#define U5500_PER3_BASE		0x80140000
+#define U5500_PER4_BASE		0x80150000
+#define U5500_PER5_BASE		0x80100000
+#define U5500_PER6_BASE		0x80120000
+
+#define U5500_GIC_DIST_BASE	0xA0411000
+#define U5500_GIC_CPU_BASE	0xA0410100
+#define U5500_DMA_BASE		0x90030000
+#define U5500_MCDE_BASE		0xA0400000
+#define U5500_MODEM_BASE	0xB0000000
+#define U5500_L2CC_BASE		0xA0412000
+#define U5500_SCU_BASE		0xA0410000
+#define U5500_DSI1_BASE		0xA0401000
+#define U5500_DSI2_BASE		0xA0402000
+#define U5500_SIA_BASE		0xA0100000
+#define U5500_SVA_BASE		0x80200000
+#define U5500_HSEM_BASE		0xA0000000
+#define U5500_NAND0_BASE	0x60000000
+#define U5500_NAND1_BASE	0x70000000
+#define U5500_TWD_BASE		0xa0410600
+#define U5500_B2R2_BASE		0xa0200000
+
+#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
+
+#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
+
+#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
+
+#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
+#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
+#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
+
+#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
+
+#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5000)
+#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
+
+#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
new file mode 100644
index 0000000..85fc6a8
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE	0x40000000
+#define U8500_ESRAM_BANK_SIZE	0x00020000
+#define U8500_ESRAM_BANK0	U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1	(U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE	(U8500_ESRAM_BANK4 + 0x4000)
+
+#define U8500_PER3_BASE		0x80000000
+#define U8500_STM_BASE		0x80100000
+#define U8500_STM_REG_BASE	(U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_B2R2_BASE		0x80130000
+#define U8500_HSEM_BASE		0x80140000
+#define U8500_PER4_BASE		0x80150000
+#define U8500_ICN_BASE		0x81000000
+
+#define U8500_BOOT_ROM_BASE	0x90000000
+/* ASIC ID is at 0xff4 offset within this region */
+#define U8500_ASIC_ID_BASE	0x9001F000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE_ED	0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE_ED	0xa0362000
+#define U8500_DMA_BASE		0x801C0000	/* v1 */
+
+#define U8500_SBAG_BASE		0xa0390000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_MODEM_I2C		0xb7e02000
+
+#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE	(U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
+
+/* per7 base addressess */
+#define U8500_CR_BASE_ED	(U8500_PER7_BASE_ED + 0x8000)
+#define U8500_MTU0_BASE_ED	(U8500_PER7_BASE_ED + 0xa000)
+#define U8500_MTU1_BASE_ED	(U8500_PER7_BASE_ED + 0xb000)
+#define U8500_TZPC0_BASE_ED	(U8500_PER7_BASE_ED + 0xc000)
+#define U8500_CLKRST7_BASE_ED	(U8500_PER7_BASE_ED + 0xf000)
+
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x0f000)
+
+/* per3 base addresses */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE		(U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
+
+#define U8500_SHRM_GOP_INTERRUPT_BASE	0xB7C00040
+
+#define U8500_GPIOBANK0_BASE	U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE	(U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE	U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE	(U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE	(U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE	(U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE	U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a..c5203b7 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,12 +8,21 @@
  * published by the Free Software Foundation.
  *
  */
-	.macro	addruart,rx
+#include <mach/hardware.h>
+
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+#define __UX500_UART(n)	UX500_UART##n##_BASE
+#define UX500_UART(n)	__UX500_UART(n)
+#define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
+
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@MMU enabled?
-	moveq	\rx, #0x80000000	@MMU off, Physical address
-	movne	\rx, #0xF0000000	@MMU on, Virtual address
-	orr	\rx, \rx, #0x7000
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =UART_BASE				@ no, physical address
+	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
new file mode 100644
index 0000000..c2b2f25
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+
+struct platform_device;
+struct amba_device;
+
+extern struct platform_device u5500_gpio_devs[];
+extern struct platform_device u8500_gpio_devs[];
+
+extern struct amba_device ux500_pl031_device;
+extern struct amba_device u8500_ssp0_device;
+extern struct amba_device ux500_uart0_device;
+extern struct amba_device ux500_uart1_device;
+extern struct amba_device ux500_uart2_device;
+
+extern struct platform_device ux500_i2c1_device;
+extern struct platform_device ux500_i2c2_device;
+extern struct platform_device ux500_i2c3_device;
+
+extern struct platform_device u8500_i2c0_device;
+extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+
+void dma40_u8500ed_fixup(void);
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index eece330..60ea88d 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -17,7 +17,7 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+		ldr     \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
new file mode 100644
index 0000000..d548a62
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/*
+ * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
+ * room for a couple of GPIO expanders.
+ */
+#define ARCH_NR_GPIOS	350
+
+#include <plat/gpio.h>
+
+#define __GPIO_RESOURCE(soc, block)					\
+	{								\
+		.start	= soc##_GPIOBANK##block##_BASE,			\
+		.end	= soc##_GPIOBANK##block##_BASE + 127,		\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+	{								\
+		.start	= IRQ_GPIO##block,				\
+		.end	= IRQ_GPIO##block,				\
+		.flags	= IORESOURCE_IRQ,				\
+	}
+
+#define __GPIO_DEVICE(soc, block)					\
+	{								\
+		.name		= "gpio",				\
+		.id		= block,				\
+		.num_resources	= 2,					\
+		.resource	= &soc##_gpio_resources[block * 2],	\
+		.dev = {						\
+			.platform_data = &soc##_gpio_data[block],	\
+		},							\
+	}
+
+#define GPIO_DATA(_name, first)						\
+	{								\
+		.name		= _name,				\
+		.first_gpio	= first,				\
+		.first_irq	= NOMADIK_GPIO_TO_IRQ(first),		\
+	}
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U8500, block)
+#define GPIO_DEVICE(block)	__GPIO_DEVICE(u8500, block)
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U5500, block)
+#define GPIO_DEVICE(block)	__GPIO_DEVICE(u5500, block)
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 6da6502..8656379 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -23,109 +23,106 @@
 
 /* typesafe io address */
 #define __io_address(n)		__io(IO_ADDRESS(n))
+/* used by some plat-nomadik code */
+#define io_p2v(n)		__io_address(n)
 
-/*
- * Base address definitions for U8500 Onchip IPs. All the
- * peripherals are contained in a single 1 Mbyte region, with
- * AHB peripherals at the bottom and APB peripherals at the
- * top of the region. PER stands for PERIPHERAL region which
- * itself divided into sub regions.
- */
-#define U8500_PER3_BASE		0x80000000
-#define U8500_PER2_BASE		0x80110000
-#define U8500_PER1_BASE		0x80120000
-#define U8500_PER4_BASE		0x80150000
-
-#define U8500_PER6_BASE		0xa03c0000
-#define U8500_PER5_BASE		0xa03e0000
-#define U8500_PER7_BASE		0xa03d0000
-
-#define U8500_SVA_BASE		0xa0100000
-#define U8500_SIA_BASE		0xa0200000
-
-#define U8500_SGA_BASE		0xa0300000
-#define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE		0xa0362000
-
-#define U8500_SCU_BASE		0xa0410000
-#define U8500_GIC_CPU_BASE	0xa0410100
-#define U8500_TWD_BASE		0xa0410600
-#define U8500_GIC_DIST_BASE	0xa0411000
-#define U8500_L2CC_BASE		0xa0412000
-
-#define U8500_TWD_SIZE		0x100
-
-/* per7 base addressess */
-#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
-#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
-#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
-#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
-#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
-
-/* per6 base addressess */
-#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
-#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
-
-/* per5 base addressess */
-#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
-#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
-
-/* per4 base addressess */
-#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
-#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
-#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
-#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
-#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
-#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
-#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
-#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
-
-/* per3 base addressess */
-#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
-#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
-
-/* per2 base addressess */
-#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
-#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
-#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
-#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
-#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
-#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
-#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+#include <mach/db8500-regs.h>
+#include <mach/db5500-regs.h>
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define UX500(periph)		U8500_##periph##_BASE
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define UX500(periph)		U5500_##periph##_BASE
+#endif
+
+#define UX500_BACKUPRAM0_BASE	UX500(BACKUPRAM0)
+#define UX500_BACKUPRAM1_BASE	UX500(BACKUPRAM1)
+#define UX500_B2R2_BASE		UX500(B2R2)
+
+#define UX500_CLKRST1_BASE	UX500(CLKRST1)
+#define UX500_CLKRST2_BASE	UX500(CLKRST2)
+#define UX500_CLKRST3_BASE	UX500(CLKRST3)
+#define UX500_CLKRST5_BASE	UX500(CLKRST5)
+#define UX500_CLKRST6_BASE	UX500(CLKRST6)
+
+#define UX500_DMA_BASE		UX500(DMA)
+#define UX500_FSMC_BASE		UX500(FSMC)
+
+#define UX500_GIC_CPU_BASE	UX500(GIC_CPU)
+#define UX500_GIC_DIST_BASE	UX500(GIC_DIST)
+
+#define UX500_I2C1_BASE		UX500(I2C1)
+#define UX500_I2C2_BASE		UX500(I2C2)
+#define UX500_I2C3_BASE		UX500(I2C3)
+
+#define UX500_L2CC_BASE		UX500(L2CC)
+#define UX500_MCDE_BASE		UX500(MCDE)
+#define UX500_MTU0_BASE		UX500(MTU0)
+#define UX500_MTU1_BASE		UX500(MTU1)
+#define UX500_PRCMU_BASE	UX500(PRCMU)
+
+#define UX500_RNG_BASE		UX500(RNG)
+#define UX500_RTC_BASE		UX500(RTC)
+
+#define UX500_SCU_BASE		UX500(SCU)
+
+#define UX500_SDI0_BASE		UX500(SDI0)
+#define UX500_SDI1_BASE		UX500(SDI1)
+#define UX500_SDI2_BASE		UX500(SDI2)
+#define UX500_SDI3_BASE		UX500(SDI3)
+#define UX500_SDI4_BASE		UX500(SDI4)
+
+#define UX500_SPI0_BASE		UX500(SPI0)
+#define UX500_SPI1_BASE		UX500(SPI1)
+#define UX500_SPI2_BASE		UX500(SPI2)
+#define UX500_SPI3_BASE		UX500(SPI3)
+
+#define UX500_SIA_BASE		UX500(SIA)
+#define UX500_SVA_BASE		UX500(SVA)
+
+#define UX500_TWD_BASE		UX500(TWD)
+
+#define UX500_UART0_BASE	UX500(UART0)
+#define UX500_UART1_BASE	UX500(UART1)
+#define UX500_UART2_BASE	UX500(UART2)
+
+#define UX500_USBOTG_BASE	UX500(USBOTG)
 
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID		0x01080022
 
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+static inline bool cpu_is_u8500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB8500
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+static inline bool cpu_is_u8500ed(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+}
+
+static inline bool cpu_is_u8500v1(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+}
+
+static inline bool cpu_is_u5500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB5500
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+#endif
+
 #endif				/* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 394b5dd..7970684 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -42,6 +42,7 @@
 #define IRQ_AB4500		(IRQ_SHPI_START + 40)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
+#define IRQ_I2C4		(IRQ_SHPI_START + 51)
 #define IRQ_SSP1		(IRQ_SHPI_START + 52)
 #define IRQ_I2C2		(IRQ_SHPI_START + 55)
 #define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
@@ -66,6 +67,12 @@
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
  */
-#define NR_IRQS			161
+#define U8500_SOC_NR_IRQS		161
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			288
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + U8500_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - U8500_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
 #endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index cf0ce16..e978dbd 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -14,10 +14,28 @@
 #include <asm/mach/time.h>
 #include <linux/init.h>
 
-extern void u8500_map_io(void);
-extern void u8500_init_devices(void);
-extern void u8500_init_irq(void);
+extern void __init ux500_map_io(void);
+extern void __init u5500_map_io(void);
+extern void __init u8500_map_io(void);
+
+extern void __init ux500_init_devices(void);
+extern void __init u5500_init_devices(void);
+extern void __init u8500_init_devices(void);
+
+extern void __init ux500_init_irq(void);
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
 
+extern void __init amba_add_devices(struct amba_device *devs[], int num);
+
+struct sys_timer;
+extern struct sys_timer ux500_timer;
+
+#define __IO_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_DEVICE,		\
+}
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 8552eb1..0271ca0 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -30,22 +30,22 @@
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(U8500_UART_FR) & (1 << 5))
 		barrier();
-	writeb(c, U8500_UART_DR);
+	__raw_writeb(c, U8500_UART_DR);
 }
 
 static void flush(void)
 {
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
-	while (readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(U8500_UART_FR) & (1 << 3))
 		barrier();
 }
 
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
index 86cdbbc..a4945cb 100644
--- a/arch/arm/mach-ux500/include/mach/vmalloc.h
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -15,4 +15,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END	0xf0000000
+#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 8dfe7ca..438ef16 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -30,7 +30,7 @@ volatile int __cpuinitdata pen_release = -1;
 
 static unsigned int __init get_core_count(void)
 {
-	return scu_get_core_count(__io_address(U8500_SCU_BASE));
+	return scu_get_core_count(__io_address(UX500_SCU_BASE));
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
@@ -75,7 +75,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * that it has been released by resetting pen_release.
 	 */
 	pen_release = cpu;
-	flush_cache_all();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -105,12 +106,12 @@ static void __init wakeup_secondary(void)
 	 */
 #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
 	__raw_writel(virt_to_phys(u8500_secondary_startup),
-		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		__io_address(UX500_BACKUPRAM0_BASE) +
 		U8500_CPU1_JUMPADDR_OFFSET);
 
 #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 	__raw_writel(0xA1FEED01,
-		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		__io_address(UX500_BACKUPRAM0_BASE) +
 		U8500_CPU1_WAKEMAGIC_OFFSET);
 
 	/* make sure write buffer is drained */
@@ -171,7 +172,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		 * boot CPU, but only if we have more than one CPU.
 		 */
 		percpu_timer_setup();
-		scu_enable(__io_address(U8500_SCU_BASE));
+		scu_enable(__io_address(UX500_SCU_BASE));
 		wakeup_secondary();
 	}
 }
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 0000000..e701627
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,154 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_NR_DEV 64
+
+enum dma_src_dev_type {
+	STEDMA40_DEV_SPI0_RX = 0,
+	STEDMA40_DEV_SD_MMC0_RX = 1,
+	STEDMA40_DEV_SD_MMC1_RX = 2,
+	STEDMA40_DEV_SD_MMC2_RX = 3,
+	STEDMA40_DEV_I2C1_RX = 4,
+	STEDMA40_DEV_I2C3_RX = 5,
+	STEDMA40_DEV_I2C2_RX = 6,
+	STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
+	STEDMA40_DEV_SSP0_RX = 8,
+	STEDMA40_DEV_SSP1_RX = 9,
+	STEDMA40_DEV_MCDE_RX = 10,
+	STEDMA40_DEV_UART2_RX = 11,
+	STEDMA40_DEV_UART1_RX = 12,
+	STEDMA40_DEV_UART0_RX = 13,
+	STEDMA40_DEV_MSP2_RX = 14,
+	STEDMA40_DEV_I2C0_RX = 15,
+	STEDMA40_DEV_USB_OTG_IEP_8 = 16,
+	STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
+	STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
+	STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
+	STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+	STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+	STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+	STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+	STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
+	STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
+	STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
+	STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
+	STEDMA40_DEV_SD_MM2_RX = 28,
+	STEDMA40_DEV_SD_MM0_RX = 29,
+	STEDMA40_DEV_MSP1_RX = 30,
+	/*
+	 * This channel is either SlimBus or MSP,
+	 * never both at the same time.
+	 */
+	STEDMA40_SLIM0_CH0_RX = 31,
+	STEDMA40_DEV_MSP0_RX = 31,
+	STEDMA40_DEV_SD_MM1_RX = 32,
+	STEDMA40_DEV_SPI2_RX = 33,
+	STEDMA40_DEV_I2C3_RX2 = 34,
+	STEDMA40_DEV_SPI1_RX = 35,
+	STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
+	STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
+	STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
+	STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
+	STEDMA40_DEV_SPI3_RX = 40,
+	STEDMA40_DEV_SD_MM3_RX = 41,
+	STEDMA40_DEV_SD_MM4_RX = 42,
+	STEDMA40_DEV_SD_MM5_RX = 43,
+	STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
+	STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
+	STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
+	STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
+	STEDMA40_DEV_CAC1_RX = 48,
+	/* RX channels 49 and 50 are unused */
+	STEDMA40_DEV_MSHC_RX = 51,
+	STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
+	STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
+	STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
+	STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
+	/* RX channels 56 thru 60 are unused */
+	STEDMA40_DEV_CAC0_RX = 61,
+	/* RX channels 62 and 63 are unused */
+};
+
+enum dma_dest_dev_type {
+	STEDMA40_DEV_SPI0_TX = 0,
+	STEDMA40_DEV_SD_MMC0_TX = 1,
+	STEDMA40_DEV_SD_MMC1_TX = 2,
+	STEDMA40_DEV_SD_MMC2_TX = 3,
+	STEDMA40_DEV_I2C1_TX = 4,
+	STEDMA40_DEV_I2C3_TX = 5,
+	STEDMA40_DEV_I2C2_TX = 6,
+	STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
+	STEDMA40_DEV_SSP0_TX = 8,
+	STEDMA40_DEV_SSP1_TX = 9,
+	/* TX channel 10 is unused */
+	STEDMA40_DEV_UART2_TX = 11,
+	STEDMA40_DEV_UART1_TX = 12,
+	STEDMA40_DEV_UART0_TX= 13,
+	STEDMA40_DEV_MSP2_TX = 14,
+	STEDMA40_DEV_I2C0_TX = 15,
+	STEDMA40_DEV_USB_OTG_OEP_8 = 16,
+	STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
+	STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
+	STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
+	STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+	STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+	STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+	STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+	STEDMA40_DEV_DST_SXA0_RX_TX = 24,
+	STEDMA40_DEV_DST_SXA1_RX_TX = 25,
+	STEDMA40_DEV_DST_SXA2_RX_TX = 26,
+	STEDMA40_DEV_DST_SXA3_RX_TX = 27,
+	STEDMA40_DEV_SD_MM2_TX = 28,
+	STEDMA40_DEV_SD_MM0_TX = 29,
+	STEDMA40_DEV_MSP1_TX = 30,
+	/*
+	 * This channel is either SlimBus or MSP,
+	 * never both at the same time.
+	 */
+	STEDMA40_SLIM0_CH0_TX = 31,
+	STEDMA40_DEV_MSP0_TX = 31,
+	STEDMA40_DEV_SD_MM1_TX = 32,
+	STEDMA40_DEV_SPI2_TX = 33,
+	/* Secondary I2C3 channel */
+	STEDMA40_DEV_I2C3_TX2 = 34,
+	STEDMA40_DEV_SPI1_TX = 35,
+	STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
+	STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
+	STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
+	STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
+	STEDMA40_DEV_SPI3_TX = 40,
+	STEDMA40_DEV_SD_MM3_TX = 41,
+	STEDMA40_DEV_SD_MM4_TX = 42,
+	STEDMA40_DEV_SD_MM5_TX = 43,
+	STEDMA40_DEV_DST_SXA4_RX_TX = 44,
+	STEDMA40_DEV_DST_SXA5_RX_TX = 45,
+	STEDMA40_DEV_DST_SXA6_RX_TX = 46,
+	STEDMA40_DEV_DST_SXA7_RX_TX = 47,
+	STEDMA40_DEV_CAC1_TX = 48,
+	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
+	STEDMA40_DEV_HAC1_TX = 50,
+	STEDMA40_MEMXCPY_TX_0 = 51,
+	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
+	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
+	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
+	STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
+	STEDMA40_MEMCPY_TX_1 = 56,
+	STEDMA40_MEMCPY_TX_2 = 57,
+	STEDMA40_MEMCPY_TX_3 = 58,
+	STEDMA40_MEMCPY_TX_4 = 59,
+	STEDMA40_MEMCPY_TX_5 = 60,
+	STEDMA40_DEV_CAC0_TX = 61,
+	STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
+	STEDMA40_DEV_HAC0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index ba81e70..97cf4d8 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o clock.o
+obj-y					:= core.o
 obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
 obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
 obj-$(CONFIG_PCI)			+= pci.o
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
deleted file mode 100644
index c50a44e..0000000
--- a/arch/arm/mach-versatile/clock.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/clkdev.h>
-#include <asm/hardware/icst307.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst307_vco vco;
-	vco = icst307_khz_to_vco(clk->params, rate / 1000);
-	return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst307_vco vco;
-
-		vco = icst307_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst307_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-versatile/clock.h b/arch/arm/mach-versatile/clock.h
deleted file mode 100644
index 03468fdc..0000000
--- a/arch/arm/mach-versatile/clock.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-
-struct clk {
-	unsigned long		rate;
-	const struct icst307_params *params;
-	u32			oscoff;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst307_vco vco);
-};
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e13be7c..3dff864 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,18 +28,15 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cnt32_to_63.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
@@ -48,9 +45,12 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <plat/timer-sp.h>
 
 #include "core.h"
-#include "clock.h"
 
 /*
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
@@ -58,7 +58,6 @@
  *
  * Setup a VA for the Versatile Vectored Interrupt Controller.
  */
-#define __io_address(n)		__io(IO_ADDRESS(n))
 #define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
 #define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
 
@@ -228,27 +227,6 @@ void __init versatile_map_io(void)
 	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 }
 
-#define VERSATILE_REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
-
-/*
- * This is the Versatile sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 35583 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 89 seconds between successive
- * calls to this function.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER));
-
-	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
-	v *= 125<<1;
-	do_div(v, 3<<1);
-
-	return v;
-}
-
 
 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 
@@ -379,33 +357,40 @@ static struct mmci_platform_data mmc0_plat_data = {
 /*
  * Clock handling
  */
-static const struct icst307_params versatile_oscvco_params = {
-	.ref		= 24000,
-	.vco_max	= 200000,
+static const struct icst_params versatile_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
 	.vd_min		= 4 + 8,
 	.vd_max		= 511 + 8,
 	.rd_min		= 1 + 2,
 	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
 };
 
-static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET;
+	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 	u32 val;
 
-	val = readl(sys + clk->oscoff) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys + clk->oscoff);
+	writel(val, clk->vcoreg);
 	writel(0, sys_lock);
 }
 
+static const struct clk_ops osc4_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= versatile_oscvco_set,
+};
+
 static struct clk osc4_clk = {
+	.ops	= &osc4_clk_ops,
 	.params	= &versatile_oscvco_params,
-	.oscoff	= VERSATILE_SYS_OSCCLCD_OFFSET,
-	.setvco	= versatile_oscvco_set,
 };
 
 /*
@@ -851,8 +836,9 @@ void __init versatile_init(void)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	osc4_clk.vcoreg	= __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	platform_device_register(&versatile_flash_device);
 	platform_device_register(&versatile_i2c_device);
@@ -875,120 +861,6 @@ void __init versatile_init(void)
 #define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 #define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
 #define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE		 __io_address(VERSATILE_VIC_BASE) 
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-
-	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent =	 {
-	.name		= "timer0",
-	.shift		= 32,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= timer_set_mode,
-	.set_next_event	= timer_set_next_event,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction versatile_timer_irq = {
-	.name		= "Versatile Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= versatile_timer_interrupt,
-};
-
-static cycle_t versatile_get_cycles(struct clocksource *cs)
-{
-	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_versatile = {
-	.name 		= "timer3",
- 	.rating		= 200,
- 	.read		= versatile_get_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
- 	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init versatile_clocksource_init(void)
-{
-	/* setup timer3 as free-running clocksource */
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-	       TIMER3_VA_BASE + TIMER_CTRL);
-
- 	clocksource_versatile.mult =
- 		clocksource_khz2mult(1000, clocksource_versatile.shift);
- 	clocksource_register(&clocksource_versatile);
-
- 	return 0;
-}
 
 /*
  * Set up timer interrupt, and return the current time in seconds.
@@ -1017,22 +889,8 @@ static void __init versatile_timer_init(void)
 	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 
-	/* 
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
-
-	versatile_clocksource_init();
-
-	timer0_clockevent.mult =
-		div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	timer0_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&timer0_clockevent);
+	sp804_clocksource_init(TIMER3_VA_BASE);
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
 }
 
 struct sys_timer versatile_timer = {
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
index 04b37a8..e58d077 100644
--- a/arch/arm/mach-versatile/include/mach/clkdev.h
+++ b/arch/arm/mach-versatile/include/mach/clkdev.h
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
+#include <plat/clock.h>
+
+struct clk {
+	unsigned long		rate;
+	const struct clk_ops	*ops;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
+};
+
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
 
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index b4ac00e..6fea719 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
index 8c80209..e6f7c16 100644
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/hardware/vic.h>
 
 		.macro	disable_fiq
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 7aa906c..4f8f99a 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/platform.h>
 
 /*
  * PCI space virtual addresses
@@ -49,4 +48,6 @@
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
 
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index 8320739..ec08740 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -205,7 +205,7 @@
 #define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
 #define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
 #define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
                                                 /* 0x10000000 - 0x100FFFFF */
 #define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
 #define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
@@ -213,7 +213,7 @@
 #define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
 #define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
 #define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
 #define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
 #define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
 #define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
@@ -379,12 +379,6 @@
 #define SIC_INT_PCI3                    30
 
 
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      VERSATILE_BOOT_ROM_HI
-
 /*
  * System controller bit assignment
  */
@@ -397,20 +391,6 @@
 #define VERSATILE_TIMER4_EnSel	21
 
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
 #define VERSATILE_CSR_BASE             0x10000000
 #define VERSATILE_CSR_SIZE             0x10000000
 
@@ -432,5 +412,3 @@
 #endif
 
 #endif
-
-/* 	END */
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 7161ba2..334f0df 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -16,7 +16,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
new file mode 100644
index 0000000..3f19b66
--- /dev/null
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -0,0 +1,9 @@
+menu "Versatile Express platform type"
+	depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CA9X4
+	bool "Versatile Express Cortex-A9x4 tile"
+	select CPU_V7
+	select ARM_GIC
+
+endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
new file mode 100644
index 0000000..1b71b77
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
new file mode 100644
index 0000000..07c2d9c
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x60008000
+params_phys-y	:= 0x60000100
+initrd_phys-y	:= 0x60800000
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
new file mode 100644
index 0000000..57dd95c
--- /dev/null
+++ b/arch/arm/mach-vexpress/core.h
@@ -0,0 +1,26 @@
+#define __MMIO_P2V(x)	(((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
+#define MMIO_P2V(x)	((void __iomem *)__MMIO_P2V(x))
+
+#define AMBA_DEVICE(name,busid,base,plat)	\
+struct amba_device name##_device = {		\
+	.dev		= {			\
+		.coherent_dma_mask = ~0UL,	\
+		.init_name = busid,		\
+		.platform_data = plat,		\
+	},					\
+	.res		= {			\
+		.start	= base,			\
+		.end	= base + SZ_4K - 1,	\
+		.flags	= IORESOURCE_MEM,	\
+	},					\
+	.dma_mask	= ~0UL,			\
+	.irq		= IRQ_##base,		\
+	/* .dma		= DMA_##base,*/		\
+}
+
+struct map_desc;
+
+void v2m_map_io(struct map_desc *tile, size_t num);
+extern struct sys_timer v2m_timer;
+
+extern void __iomem *gic_cpu_base_addr;
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
new file mode 100644
index 0000000..6353459
--- /dev/null
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -0,0 +1,251 @@
+/*
+ * Versatile Express Core Tile Cortex A9x4 Support
+ */
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <asm/clkdev.h>
+#include <asm/pgtable.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/pmu.h>
+
+#include <mach/clkdev.h>
+#include <mach/ct-ca9x4.h>
+
+#include <plat/timer-sp.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "core.h"
+
+#include <mach/motherboard.h>
+
+#define V2M_PA_CS7	0x10000000
+
+static struct map_desc ct_ca9x4_io_desc[] __initdata = {
+	{
+		.virtual	= __MMIO_P2V(CT_CA9X4_MPIC),
+		.pfn		= __phys_to_pfn(CT_CA9X4_MPIC),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= __MMIO_P2V(CT_CA9X4_SP804_TIMER),
+		.pfn		= __phys_to_pfn(CT_CA9X4_SP804_TIMER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= __MMIO_P2V(CT_CA9X4_L2CC),
+		.pfn		= __phys_to_pfn(CT_CA9X4_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init ct_ca9x4_map_io(void)
+{
+	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
+}
+
+void __iomem *gic_cpu_base_addr;
+
+static void __init ct_ca9x4_init_irq(void)
+{
+	gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
+	gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#if 0
+static void ct_ca9x4_timer_init(void)
+{
+	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
+	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
+
+	sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
+	sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+}
+
+static struct sys_timer ct_ca9x4_timer = {
+	.init	= ct_ca9x4_timer_init,
+};
+#endif
+
+static struct clcd_panel xvga_panel = {
+	.mode		= {
+		.name		= "XVGA",
+		.refresh	= 60,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15384,
+		.left_margin	= 168,
+		.right_margin	= 8,
+		.upper_margin	= 29,
+		.lower_margin	= 3,
+		.hsync_len	= 144,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
+{
+	v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
+	v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+}
+
+static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
+{
+	unsigned long framesize = 1024 * 768 * 2;
+	dma_addr_t dma;
+
+	fb->panel = &xvga_panel;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+				&dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map frame buffer\n");
+		return -ENOMEM;
+	}
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = framesize;
+
+	return 0;
+}
+
+static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+		fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void ct_ca9x4_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board ct_ca9x4_clcd_data = {
+	.name		= "CT-CA9X4",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.enable		= ct_ca9x4_clcd_enable,
+	.setup		= ct_ca9x4_clcd_setup,
+	.mmap		= ct_ca9x4_clcd_mmap,
+	.remove		= ct_ca9x4_clcd_remove,
+};
+
+static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
+static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
+static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+
+static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
+	&clcd_device,
+	&dmc_device,
+	&smc_device,
+	&gpio_device,
+};
+
+
+static long ct_round(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int ct_set(struct clk *clk, unsigned long rate)
+{
+	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
+}
+
+static const struct clk_ops osc1_clk_ops = {
+	.round	= ct_round,
+	.set	= ct_set,
+};
+
+static struct clk osc1_clk = {
+	.ops	= &osc1_clk_ops,
+	.rate	= 24000000,
+};
+
+static struct clk_lookup lookups[] = {
+	{	/* CLCD */
+		.dev_id		= "ct:clcd",
+		.clk		= &osc1_clk,
+	},
+};
+
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU0,
+		.end	= IRQ_CT_CA9X4_PMU_CPU0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU1,
+		.end	= IRQ_CT_CA9X4_PMU_CPU1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU2,
+		.end	= IRQ_CT_CA9X4_PMU_CPU2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU3,
+		.end	= IRQ_CT_CA9X4_PMU_CPU3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= ARRAY_SIZE(pmu_resources),
+	.resource	= pmu_resources,
+};
+
+static void ct_ca9x4_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+#endif
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
+		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
+
+	platform_device_register(&pmu_device);
+}
+
+MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
+	.phys_io	= V2M_UART0 & SECTION_MASK,
+	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= ct_ca9x4_map_io,
+	.init_irq	= ct_ca9x4_init_irq,
+#if 0
+	.timer		= &ct_ca9x4_timer,
+#else
+	.timer		= &v2m_timer,
+#endif
+	.init_machine	= ct_ca9x4_init,
+MACHINE_END
diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S
new file mode 100644
index 0000000..8a78ff6
--- /dev/null
+++ b/arch/arm/mach-vexpress/headsmp.S
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-vexpress/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Versatile Express specific entry point for secondary CPUs.  This
+ * provides a "holding pen" into which all secondary cores are held
+ * until we're ready for them to initialise.
+ */
+ENTRY(vexpress_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-vexpress/include/mach/clkdev.h b/arch/arm/mach-vexpress/include/mach/clkdev.h
new file mode 100644
index 0000000..3f8307d
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/clkdev.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#include <plat/clock.h>
+
+struct clk {
+	const struct clk_ops	*ops;
+	unsigned long		rate;
+	const struct icst_params *params;
+};
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
new file mode 100644
index 0000000..8650f04
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -0,0 +1,47 @@
+#ifndef __MACH_CT_CA9X4_H
+#define __MACH_CT_CA9X4_H
+
+/*
+ * Physical base addresses
+ */
+#define CT_CA9X4_CLCDC		(0x10020000)
+#define CT_CA9X4_AXIRAM		(0x10060000)
+#define CT_CA9X4_DMC		(0x100e0000)
+#define CT_CA9X4_SMC		(0x100e1000)
+#define CT_CA9X4_SCC		(0x100e2000)
+#define CT_CA9X4_SP804_TIMER	(0x100e4000)
+#define CT_CA9X4_SP805_WDT	(0x100e5000)
+#define CT_CA9X4_TZPC		(0x100e6000)
+#define CT_CA9X4_GPIO		(0x100e8000)
+#define CT_CA9X4_FASTAXI	(0x100e9000)
+#define CT_CA9X4_SLOWAXI	(0x100ea000)
+#define CT_CA9X4_TZASC		(0x100ec000)
+#define CT_CA9X4_CORESIGHT	(0x10200000)
+#define CT_CA9X4_MPIC		(0x1e000000)
+#define CT_CA9X4_SYSTIMER	(0x1e004000)
+#define CT_CA9X4_SYSWDT		(0x1e007000)
+#define CT_CA9X4_L2CC		(0x1e00a000)
+
+#define CT_CA9X4_TIMER0		(CT_CA9X4_SP804_TIMER + 0x000)
+#define CT_CA9X4_TIMER1		(CT_CA9X4_SP804_TIMER + 0x020)
+
+#define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
+#define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
+#define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
+
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_CT_CA9X4_CLCDC	{ 76 }
+#define IRQ_CT_CA9X4_DMC	{ -1 }
+#define IRQ_CT_CA9X4_SMC	{ 77, 78 }
+#define IRQ_CT_CA9X4_TIMER0	80
+#define IRQ_CT_CA9X4_TIMER1	81
+#define IRQ_CT_CA9X4_GPIO	{ 82 }
+#define IRQ_CT_CA9X4_PMU_CPU0	92
+#define IRQ_CT_CA9X4_PMU_CPU1	93
+#define IRQ_CT_CA9X4_PMU_CPU2	94
+#define IRQ_CT_CA9X4_PMU_CPU3	95
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
new file mode 100644
index 0000000..5167e2a
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG_LL_UART_OFFSET	0x00009000
+
+		.macro	addruart,rx,tmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf8000000	@ virtual base
+		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
new file mode 100644
index 0000000..20e9fb5
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -0,0 +1,67 @@
+#include <asm/hardware/gic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-28 are reserved
+	 * 29-31 are local.  We allow 30 to be used for the watchdog.
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * For now, we ignore all local interrupts so only return an interrupt if it's
+	 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+	 *
+	 * A simple read from the controller will tell us the number of the highest
+	 * priority enabled interrupt.  We then just need to check whether it is in the
+	 * valid range for an IRQ (30-1020 inclusive).
+	 */
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+	ldr	\tmp, =1021
+	bic     \irqnr, \irqstat, #0x1c00
+	cmp     \irqnr, #29
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	cmp	\irqnr, #16
+	strcc	\irqstat, [\base, #GIC_CPU_EOI]
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	mov 	\tmp, #0
+	cmp	\irqnr, #29
+	moveq	\tmp, #1
+	streq	\irqstat, [\base, #GIC_CPU_EOI]
+	cmp	\tmp, #0
+	.endm
+
diff --git a/arch/arm/mach-vexpress/include/mach/hardware.h b/arch/arm/mach-vexpress/include/mach/hardware.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/hardware.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h
new file mode 100644
index 0000000..748bb52
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
new file mode 100644
index 0000000..7054cbf
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/irqs.h
@@ -0,0 +1,4 @@
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define NR_IRQS	128
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
new file mode 100644
index 0000000..be28232
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/memory.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x60000000)
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
new file mode 100644
index 0000000..98a8ded
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/motherboard.h
@@ -0,0 +1,121 @@
+#ifndef __MACH_MOTHERBOARD_H
+#define __MACH_MOTHERBOARD_H
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0		(V2M_PA_CS0)
+#define V2M_NOR1		(V2M_PA_CS1)
+#define V2M_SRAM		(V2M_PA_CS2)
+#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
+#define V2M_LAN9118		(V2M_PA_CS3 + 0x02000000)
+#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)
+
+/*
+ * Physical addresses, offset from V2M_PA_CS7
+ */
+#define V2M_SYSREGS		(V2M_PA_CS7 + 0x00000000)
+#define V2M_SYSCTL		(V2M_PA_CS7 + 0x00001000)
+#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + 0x00002000)
+
+#define V2M_AACI		(V2M_PA_CS7 + 0x00004000)
+#define V2M_MMCI		(V2M_PA_CS7 + 0x00005000)
+#define V2M_KMI0		(V2M_PA_CS7 + 0x00006000)
+#define V2M_KMI1		(V2M_PA_CS7 + 0x00007000)
+
+#define V2M_UART0		(V2M_PA_CS7 + 0x00009000)
+#define V2M_UART1		(V2M_PA_CS7 + 0x0000a000)
+#define V2M_UART2		(V2M_PA_CS7 + 0x0000b000)
+#define V2M_UART3		(V2M_PA_CS7 + 0x0000c000)
+
+#define V2M_WDT			(V2M_PA_CS7 + 0x0000f000)
+
+#define V2M_TIMER01		(V2M_PA_CS7 + 0x00011000)
+#define V2M_TIMER23		(V2M_PA_CS7 + 0x00012000)
+
+#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + 0x00016000)
+#define V2M_RTC			(V2M_PA_CS7 + 0x00017000)
+
+#define V2M_CF			(V2M_PA_CS7 + 0x0001a000)
+#define V2M_CLCD		(V2M_PA_CS7 + 0x0001f000)
+
+#define V2M_SYS_ID		(V2M_SYSREGS + 0x000)
+#define V2M_SYS_SW		(V2M_SYSREGS + 0x004)
+#define V2M_SYS_LED		(V2M_SYSREGS + 0x008)
+#define V2M_SYS_100HZ		(V2M_SYSREGS + 0x024)
+#define V2M_SYS_FLAGS		(V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSSET	(V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSCLR	(V2M_SYSREGS + 0x034)
+#define V2M_SYS_NVFLAGS		(V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSSET	(V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSCLR	(V2M_SYSREGS + 0x03c)
+#define V2M_SYS_MCI		(V2M_SYSREGS + 0x048)
+#define V2M_SYS_FLASH		(V2M_SYSREGS + 0x03c)
+#define V2M_SYS_CFGSW		(V2M_SYSREGS + 0x058)
+#define V2M_SYS_24MHZ		(V2M_SYSREGS + 0x05c)
+#define V2M_SYS_MISC		(V2M_SYSREGS + 0x060)
+#define V2M_SYS_DMA		(V2M_SYSREGS + 0x064)
+#define V2M_SYS_PROCID0		(V2M_SYSREGS + 0x084)
+#define V2M_SYS_PROCID1		(V2M_SYSREGS + 0x088)
+#define V2M_SYS_CFGDATA		(V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL		(V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT		(V2M_SYSREGS + 0x0a8)
+
+#define V2M_TIMER0		(V2M_TIMER01 + 0x000)
+#define V2M_TIMER1		(V2M_TIMER01 + 0x020)
+
+#define V2M_TIMER2		(V2M_TIMER23 + 0x000)
+#define V2M_TIMER3		(V2M_TIMER23 + 0x020)
+
+
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_V2M_WDT		{ (32 + 0) }
+#define IRQ_V2M_TIMER0		(32 + 2)
+#define IRQ_V2M_TIMER1		(32 + 2)
+#define IRQ_V2M_TIMER2		(32 + 3)
+#define IRQ_V2M_TIMER3		(32 + 3)
+#define IRQ_V2M_RTC		{ (32 + 4) }
+#define IRQ_V2M_UART0		{ (32 + 5) }
+#define IRQ_V2M_UART1		{ (32 + 6) }
+#define IRQ_V2M_UART2		{ (32 + 7) }
+#define IRQ_V2M_UART3		{ (32 + 8) }
+#define IRQ_V2M_MMCI		{ (32 + 9), (32 + 10) }
+#define IRQ_V2M_AACI		{ (32 + 11) }
+#define IRQ_V2M_KMI0		{ (32 + 12) }
+#define IRQ_V2M_KMI1		{ (32 + 13) }
+#define IRQ_V2M_CLCD		{ (32 + 14) }
+#define IRQ_V2M_LAN9118		(32 + 15)
+#define IRQ_V2M_ISP1761		(32 + 16)
+#define IRQ_V2M_PCIE		(32 + 17)
+
+
+/*
+ * Configuration
+ */
+#define SYS_CFG_START		(1 << 31)
+#define SYS_CFG_WRITE		(1 << 30)
+#define SYS_CFG_OSC		(1 << 20)
+#define SYS_CFG_VOLT		(2 << 20)
+#define SYS_CFG_AMP		(3 << 20)
+#define SYS_CFG_TEMP		(4 << 20)
+#define SYS_CFG_RESET		(5 << 20)
+#define SYS_CFG_SCC		(6 << 20)
+#define SYS_CFG_MUXFPGA		(7 << 20)
+#define SYS_CFG_SHUTDOWN	(8 << 20)
+#define SYS_CFG_REBOOT		(9 << 20)
+#define SYS_CFG_DVIMODE		(11 << 20)
+#define SYS_CFG_POWER		(12 << 20)
+#define SYS_CFG_SITE_MB		(0 << 16)
+#define SYS_CFG_SITE_DB1	(1 << 16)
+#define SYS_CFG_SITE_DB2	(2 << 16)
+#define SYS_CFG_STACK(n)	((n) << 12)
+
+#define SYS_CFG_ERR		(1 << 1)
+#define SYS_CFG_COMPLETE	(1 << 0)
+
+int v2m_cfg_write(u32 devfn, u32 data);
+int v2m_cfg_read(u32 devfn, u32 *data);
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
new file mode 100644
index 0000000..72a9621
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_SMP_H
+#define __MACH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()				\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
new file mode 100644
index 0000000..899a4e6
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-vexpress/include/mach/timex.h b/arch/arm/mach-vexpress/include/mach/timex.h
new file mode 100644
index 0000000..00029ba
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
new file mode 100644
index 0000000..7972c57
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+#define get_uart_base()	(0x10000000 + 0x00009000)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vexpress/include/mach/vmalloc.h b/arch/arm/mach-vexpress/include/mach/vmalloc.h
new file mode 100644
index 0000000..f43a36e
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		0xf8000000UL
diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c
new file mode 100644
index 0000000..c0e3a59
--- /dev/null
+++ b/arch/arm/mach-vexpress/localtimer.c
@@ -0,0 +1,26 @@
+/*
+ *  linux/arch/arm/mach-vexpress/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+#include <mach/irqs.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
new file mode 100644
index 0000000..6709706
--- /dev/null
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -0,0 +1,190 @@
+/*
+ *  linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/ct-ca9x4.h>
+#include <mach/motherboard.h>
+#define V2M_PA_CS7 0x10000000
+
+#include "core.h"
+
+extern void vexpress_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static void __iomem *scu_base_addr(void)
+{
+	return MMIO_P2V(A9_MPCORE_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * This is really belt and braces; we hold unintended secondary
+	 * CPUs in the holding pen until we're ready for them.  However,
+	 * since we haven't sent them a soft interrupt, they shouldn't
+	 * be there.
+	 */
+	pen_release = cpu;
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	smp_cross_call(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "vexpress: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "vexpress: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start.
+	 */
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
+
+		/*
+		 * Write the address of secondary startup into the
+		 * system-wide flags register. The boot monitor waits
+		 * until it receives a soft interrupt, and then the
+		 * secondary CPU branches to this address.
+		 */
+		writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+		writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+			MMIO_P2V(V2M_SYS_FLAGSSET));
+	}
+}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
new file mode 100644
index 0000000..c842397
--- /dev/null
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -0,0 +1,361 @@
+/*
+ * Versatile Express V2M Motherboard Support
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/usb/isp1760.h>
+
+#include <asm/clkdev.h>
+#include <asm/sizes.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/arm_timer.h>
+
+#include <mach/clkdev.h>
+#include <mach/motherboard.h>
+
+#include <plat/timer-sp.h>
+
+#include "core.h"
+
+#define V2M_PA_CS0	0x40000000
+#define V2M_PA_CS1	0x44000000
+#define V2M_PA_CS2	0x48000000
+#define V2M_PA_CS3	0x4c000000
+#define V2M_PA_CS7	0x10000000
+
+static struct map_desc v2m_io_desc[] __initdata = {
+	{
+		.virtual	= __MMIO_P2V(V2M_PA_CS7),
+		.pfn		= __phys_to_pfn(V2M_PA_CS7),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init v2m_map_io(struct map_desc *tile, size_t num)
+{
+	iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+	iotable_init(tile, num);
+}
+
+
+static void v2m_timer_init(void)
+{
+	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
+	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
+
+	sp804_clocksource_init(MMIO_P2V(V2M_TIMER1));
+	sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0);
+}
+
+struct sys_timer v2m_timer = {
+	.init	= v2m_timer_init,
+};
+
+
+static DEFINE_SPINLOCK(v2m_cfg_lock);
+
+int v2m_cfg_write(u32 devfn, u32 data)
+{
+	/* Configuration interface broken? */
+	u32 val;
+
+	printk("%s: writing %08x to %08x\n", __func__, data, devfn);
+
+	devfn |= SYS_CFG_START | SYS_CFG_WRITE;
+
+	spin_lock(&v2m_cfg_lock);
+	val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
+
+	writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
+	writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+
+	do {
+		val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	} while (val == 0);
+	spin_unlock(&v2m_cfg_lock);
+
+	return !!(val & SYS_CFG_ERR);
+}
+
+int v2m_cfg_read(u32 devfn, u32 *data)
+{
+	u32 val;
+
+	devfn |= SYS_CFG_START;
+
+	spin_lock(&v2m_cfg_lock);
+	writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
+	writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+
+	mb();
+
+	do {
+		cpu_relax();
+		val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	} while (val == 0);
+
+	*data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
+	spin_unlock(&v2m_cfg_lock);
+
+	return !!(val & SYS_CFG_ERR);
+}
+
+
+static struct resource v2m_pcie_i2c_resource = {
+	.start	= V2M_SERIAL_BUS_PCI,
+	.end	= V2M_SERIAL_BUS_PCI + SZ_4K - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device v2m_pcie_i2c_device = {
+	.name		= "versatile-i2c",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &v2m_pcie_i2c_resource,
+};
+
+static struct resource v2m_ddc_i2c_resource = {
+	.start	= V2M_SERIAL_BUS_DVI,
+	.end	= V2M_SERIAL_BUS_DVI + SZ_4K - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device v2m_ddc_i2c_device = {
+	.name		= "versatile-i2c",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= &v2m_ddc_i2c_resource,
+};
+
+static struct resource v2m_eth_resources[] = {
+	{
+		.start	= V2M_LAN9118,
+		.end	= V2M_LAN9118 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_V2M_LAN9118,
+		.end	= IRQ_V2M_LAN9118,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config v2m_eth_config = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device v2m_eth_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.resource	= v2m_eth_resources,
+	.num_resources	= ARRAY_SIZE(v2m_eth_resources),
+	.dev.platform_data = &v2m_eth_config,
+};
+
+static struct resource v2m_usb_resources[] = {
+	{
+		.start	= V2M_ISP1761,
+		.end	= V2M_ISP1761 + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_V2M_ISP1761,
+		.end	= IRQ_V2M_ISP1761,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data v2m_usb_config = {
+	.is_isp1761		= true,
+	.bus_width_16		= false,
+	.port1_otg		= true,
+	.analog_oc		= false,
+	.dack_polarity_high	= false,
+	.dreq_polarity_high	= false,
+};
+
+static struct platform_device v2m_usb_device = {
+	.name		= "isp1760",
+	.id		= -1,
+	.resource	= v2m_usb_resources,
+	.num_resources	= ARRAY_SIZE(v2m_usb_resources),
+	.dev.platform_data = &v2m_usb_config,
+};
+
+static int v2m_flash_init(void)
+{
+	writel(0, MMIO_P2V(V2M_SYS_FLASH));
+	return 0;
+}
+
+static void v2m_flash_exit(void)
+{
+	writel(0, MMIO_P2V(V2M_SYS_FLASH));
+}
+
+static void v2m_flash_set_vpp(int on)
+{
+	writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
+}
+
+static struct flash_platform_data v2m_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 4,
+	.init		= v2m_flash_init,
+	.exit		= v2m_flash_exit,
+	.set_vpp	= v2m_flash_set_vpp,
+};
+
+static struct resource v2m_flash_resources[] = {
+	{
+		.start	= V2M_NOR0,
+		.end	= V2M_NOR0 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= V2M_NOR1,
+		.end	= V2M_NOR1 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device v2m_flash_device = {
+	.name		= "armflash",
+	.id		= -1,
+	.resource	= v2m_flash_resources,
+	.num_resources	= ARRAY_SIZE(v2m_flash_resources),
+	.dev.platform_data = &v2m_flash_data,
+};
+
+
+static unsigned int v2m_mmci_status(struct device *dev)
+{
+	return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
+}
+
+static struct mmci_platform_data v2m_mmci_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= v2m_mmci_status,
+};
+
+static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
+static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
+static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
+static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
+static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
+static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
+static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
+static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
+static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
+static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+
+static struct amba_device *v2m_amba_devs[] __initdata = {
+	&aaci_device,
+	&mmci_device,
+	&kmi0_device,
+	&kmi1_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&wdt_device,
+	&rtc_device,
+};
+
+
+static long v2m_osc_round(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int v2m_osc1_set(struct clk *clk, unsigned long rate)
+{
+	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
+}
+
+static const struct clk_ops osc1_clk_ops = {
+	.round	= v2m_osc_round,
+	.set	= v2m_osc1_set,
+};
+
+static struct clk osc1_clk = {
+	.ops	= &osc1_clk_ops,
+	.rate	= 24000000,
+};
+
+static struct clk osc2_clk = {
+	.rate	= 24000000,
+};
+
+static struct clk_lookup v2m_lookups[] = {
+	{	/* UART0 */
+		.dev_id		= "mb:uart0",
+		.clk		= &osc2_clk,
+	}, {	/* UART1 */
+		.dev_id		= "mb:uart1",
+		.clk		= &osc2_clk,
+	}, {	/* UART2 */
+		.dev_id		= "mb:uart2",
+		.clk		= &osc2_clk,
+	}, {	/* UART3 */
+		.dev_id		= "mb:uart3",
+		.clk		= &osc2_clk,
+	}, {	/* KMI0 */
+		.dev_id		= "mb:kmi0",
+		.clk		= &osc2_clk,
+	}, {	/* KMI1 */
+		.dev_id		= "mb:kmi1",
+		.clk		= &osc2_clk,
+	}, {	/* MMC0 */
+		.dev_id		= "mb:mmci",
+		.clk		= &osc2_clk,
+	}, {	/* CLCD */
+		.dev_id		= "mb:clcd",
+		.clk		= &osc1_clk,
+	},
+};
+
+static void v2m_power_off(void)
+{
+	if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
+		printk(KERN_EMERG "Unable to shutdown\n");
+}
+
+static void v2m_restart(char str, const char *cmd)
+{
+	if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+		printk(KERN_EMERG "Unable to reboot\n");
+}
+
+static int __init v2m_init(void)
+{
+	int i;
+
+	clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+
+	platform_device_register(&v2m_pcie_i2c_device);
+	platform_device_register(&v2m_ddc_i2c_device);
+	platform_device_register(&v2m_flash_device);
+	platform_device_register(&v2m_eth_device);
+	platform_device_register(&v2m_usb_device);
+
+	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
+		amba_device_register(v2m_amba_devs[i], &iomem_resource);
+
+	pm_power_off = v2m_power_off;
+	arm_pm_restart = v2m_restart;
+
+	return 0;
+}
+arch_initcall(v2m_init);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index b785994b..2c371ff 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -90,12 +90,3 @@ void nuc900_subclk_enable(struct clk *clk, int enable)
 
 	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
 }
-
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
-	int i;
-
-	for (i = 0; i < num; i++)
-		clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index f5816a0..c56ddab 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -14,7 +14,6 @@
 
 void nuc900_clk_enable(struct clk *clk, int enable);
 void nuc900_subclk_enable(struct clk *clk, int enable);
-void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
 	unsigned long		cken;
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 20dc0c9..83c5632 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -45,6 +45,7 @@ static struct map_desc nuc900_iodesc[] __initdata = {
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
+	IODESC_ENT(GPIO),
 };
 
 /* Initial clock declarations. */
@@ -68,6 +69,11 @@ static DEFINE_CLK(gdma, 27);
 static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
 static DEFINE_CLK(ext, 0);
+static DEFINE_CLK(timer0, 19);
+static DEFINE_CLK(timer1, 20);
+static DEFINE_CLK(timer2, 21);
+static DEFINE_CLK(timer3, 22);
+static DEFINE_CLK(timer4, 23);
 
 static struct clk_lookup nuc900_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
@@ -87,9 +93,14 @@ static struct clk_lookup nuc900_clkregs[] = {
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
+	DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
+	DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
+	DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
+	DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
 };
 
 /* Initial serial platform data */
@@ -208,6 +219,6 @@ void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
 
 void __init nuc900_init_clocks(void)
 {
-	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+	clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
 }
 
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 4d58ba1..f8730b6 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi;
 extern struct platform_device nuc900_device_kpi;
 extern struct platform_device nuc900_device_rtc;
 extern struct platform_device nuc900_device_ts;
+extern struct platform_device nuc900_device_lcd;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index ec711f4..b2eda4d 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -18,6 +18,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/mtd.h>
@@ -34,6 +35,7 @@
 #include <mach/regs-serial.h>
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
+#include <mach/fb.h>
 
 #include "cpu.h"
 
@@ -380,6 +382,74 @@ struct platform_device nuc900_device_kpi = {
 	.resource	= nuc900_kpi_resource,
 };
 
+#ifdef CONFIG_FB_NUC900
+
+static struct resource nuc900_lcd_resource[] = {
+	[0] = {
+		.start = W90X900_PA_LCD,
+		.end   = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD,
+		.end   = IRQ_LCD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_lcd_dmamask = -1;
+struct platform_device nuc900_device_lcd = {
+	.name             = "nuc900-lcd",
+	.id               = -1,
+	.num_resources    = ARRAY_SIZE(nuc900_lcd_resource),
+	.resource         = nuc900_lcd_resource,
+	.dev              = {
+		.dma_mask               = &nuc900_device_lcd_dmamask,
+		.coherent_dma_mask      = -1,
+	}
+};
+
+void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
+{
+	struct nuc900fb_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		nuc900_device_lcd.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for LCD platform data\n");
+	}
+}
+#endif
+
+/* AUDIO controller*/
+static u64 nuc900_device_audio_dmamask = -1;
+static struct resource nuc900_ac97_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ACTL,
+		.end   = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ACTL,
+		.end   = IRQ_ACTL,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_audio = {
+	.name		= "nuc900-audio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_ac97_resource),
+	.resource	= nuc900_ac97_resource,
+	.dev              = {
+		.dma_mask               = &nuc900_device_audio_dmamask,
+		.coherent_dma_mask      = -1,
+	}
+};
+
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *nuc900_public_dev[] __initdata = {
@@ -391,6 +461,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
 	&nuc900_device_emc,
 	&nuc900_device_spi,
 	&nuc900_device_wdt,
+	&nuc900_device_audio,
 };
 
 /* Provide adding specific CPU platform devices API */
diff --git a/arch/arm/mach-w90x900/include/mach/fb.h b/arch/arm/mach-w90x900/include/mach/fb.h
new file mode 100644
index 0000000..cec5ece
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/fb.h
@@ -0,0 +1,83 @@
+/* linux/include/asm/arch-nuc900/fb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Changelog:
+ *
+ *   2008/08/26     vincen.zswan modify this file for LCD.
+ */
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+
+
+/* LCD Controller Hardware Desc */
+struct nuc900fb_hw {
+	unsigned int lcd_dccs;
+	unsigned int lcd_device_ctrl;
+	unsigned int lcd_mpulcd_cmd;
+	unsigned int lcd_int_cs;
+	unsigned int lcd_crtc_size;
+	unsigned int lcd_crtc_dend;
+	unsigned int lcd_crtc_hr;
+	unsigned int lcd_crtc_hsync;
+	unsigned int lcd_crtc_vr;
+	unsigned int lcd_va_baddr0;
+	unsigned int lcd_va_baddr1;
+	unsigned int lcd_va_fbctrl;
+	unsigned int lcd_va_scale;
+	unsigned int lcd_va_test;
+	unsigned int lcd_va_win;
+	unsigned int lcd_va_stuff;
+};
+
+/* LCD Display Description */
+struct nuc900fb_display {
+	/* LCD Image type */
+	unsigned type;
+
+	/* LCD Screen Size */
+	unsigned short width;
+	unsigned short height;
+
+	/* LCD Screen Info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned long pixclock;
+	unsigned short left_margin;
+	unsigned short right_margin;
+	unsigned short hsync_len;
+	unsigned short upper_margin;
+	unsigned short lower_margin;
+	unsigned short vsync_len;
+
+	/* hardware special register value */
+	unsigned int dccs;
+	unsigned int devctl;
+	unsigned int fbctrl;
+	unsigned int scale;
+};
+
+struct nuc900fb_mach_info {
+	struct nuc900fb_display *displays;
+	unsigned num_displays;
+	unsigned default_display;
+	/* GPIO Setting  Info */
+	unsigned gpio_dir;
+	unsigned gpio_dir_mask;
+	unsigned gpio_data;
+	unsigned gpio_data_mask;
+};
+
+extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-w90x900/include/mach/mfp.h b/arch/arm/mach-w90x900/include/mach/mfp.h
new file mode 100644
index 0000000..94c0e71
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/mfp.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/mfp.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+extern void mfp_set_groupf(struct device *dev);
+extern void mfp_set_groupc(struct device *dev);
+extern void mfp_set_groupi(struct device *dev);
+extern void mfp_set_groupg(struct device *dev);
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
new file mode 100644
index 0000000..e9d480a
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ldm.h
@@ -0,0 +1,253 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-serial.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *  Description:
+ *     Nuvoton Display, LCM Register list
+ *  Author:  Wang Qiang (rurality.linux@gmail.com) 2009/12/11
+ *
+ */
+
+
+#ifndef __ASM_ARM_W90X900_REGS_LDM_H
+#define __ASM_ARM_W90X900_REGS_LDM_H
+
+#include <mach/map.h>
+
+/* Display Controller Control/Status Register */
+#define REG_LCM_DCCS			(0x00)
+
+#define LCM_DCCS_ENG_RST		(1 << 0)
+#define LCM_DCCS_VA_EN			(1 << 1)
+#define LCM_DCCS_OSD_EN			(1 << 2)
+#define LCM_DCCS_DISP_OUT_EN		(1 << 3)
+#define LCM_DCCS_DISP_INT_EN		(1 << 4)
+#define LCM_DCCS_CMD_ON			(1 << 5)
+#define LCM_DCCS_FIELD_INTR		(1 << 6)
+#define LCM_DCCS_SINGLE			(1 << 7)
+
+enum LCM_DCCS_VA_SRC {
+	LCM_DCCS_VA_SRC_YUV422		= (0 << 8),
+	LCM_DCCS_VA_SRC_YCBCR422	= (1 << 8),
+	LCM_DCCS_VA_SRC_RGB888		= (2 << 8),
+	LCM_DCCS_VA_SRC_RGB666		= (3 << 8),
+	LCM_DCCS_VA_SRC_RGB565		= (4 << 8),
+	LCM_DCCS_VA_SRC_RGB444LOW	= (5 << 8),
+	LCM_DCCS_VA_SRC_RGB444HIGH 	= (7 << 8)
+};
+
+
+/* Display Device Control Register */
+#define REG_LCM_DEV_CTRL		(0x04)
+
+enum LCM_DEV_CTRL_SWAP_YCbCr {
+	LCM_DEV_CTRL_SWAP_UYVY		= (0 << 1),
+	LCM_DEV_CTRL_SWAP_YUYV		= (1 << 1),
+	LCM_DEV_CTRL_SWAP_VYUY		= (2 << 1),
+	LCM_DEV_CTRL_SWAP_YVYU		= (3 << 1)
+};
+
+enum LCM_DEV_CTRL_RGB_SHIFT {
+	LCM_DEV_CTRL_RGB_SHIFT_NOT 	= (0 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
+	LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF	= (3 << 3)
+};
+
+enum LCM_DEV_CTRL_DEVICE {
+	LCM_DEV_CTRL_DEVICE_YUV422	= (0 << 5),
+	LCM_DEV_CTRL_DEVICE_YUV444	= (1 << 5),
+	LCM_DEV_CTRL_DEVICE_UNIPAC	= (4 << 5),
+	LCM_DEV_CTRL_DEVICE_SEIKO_EPSON	= (5 << 5),
+	LCM_DEV_CTRL_DEVICE_HIGH_COLOR	= (6 << 5),
+	LCM_DEV_CTRL_DEVICE_MPU		= (7 << 5)
+};
+
+#define LCM_DEV_CTRL_LCD_DDA		(8)
+#define LCM_DEV_CTRL_YUV2CCIR		(16)
+
+enum LCM_DEV_CTRL_LCD_SEL {
+	LCM_DEV_CTRL_LCD_SEL_RGB_GBR	= (0 << 17),
+	LCM_DEV_CTRL_LCD_SEL_BGR_RBG	= (1 << 17),
+	LCM_DEV_CTRL_LCD_SEL_GBR_RGB	= (2 << 17),
+	LCM_DEV_CTRL_LCD_SEL_RBG_BGR	= (3 << 17)
+};
+
+enum LCM_DEV_CTRL_FAL_D {
+	LCM_DEV_CTRL_FAL_D_FALLING	= (0 << 19),
+	LCM_DEV_CTRL_FAL_D_RISING	= (1 << 19),
+};
+
+enum LCM_DEV_CTRL_H_POL {
+	LCM_DEV_CTRL_H_POL_LOW		= (0 << 20),
+	LCM_DEV_CTRL_H_POL_HIGH		= (1 << 20),
+};
+
+enum LCM_DEV_CTRL_V_POL {
+	LCM_DEV_CTRL_V_POL_LOW		= (0 << 21),
+	LCM_DEV_CTRL_V_POL_HIGH		= (1 << 21),
+};
+
+enum LCM_DEV_CTRL_VR_LACE {
+	LCM_DEV_CTRL_VR_LACE_NINTERLACE	= (0 << 22),
+	LCM_DEV_CTRL_VR_LACE_INTERLACE	= (1 << 22),
+};
+
+enum LCM_DEV_CTRL_LACE {
+	LCM_DEV_CTRL_LACE_NINTERLACE	= (0 << 23),
+	LCM_DEV_CTRL_LACE_INTERLACE	= (1 << 23),
+};
+
+enum LCM_DEV_CTRL_RGB_SCALE {
+	LCM_DEV_CTRL_RGB_SCALE_4096 	= (0 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_65536 	= (1 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_262144 	= (2 << 24),
+	LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
+};
+
+enum LCM_DEV_CTRL_DBWORD {
+	LCM_DEV_CTRL_DBWORD_HALFWORD	= (0 << 26),
+	LCM_DEV_CTRL_DBWORD_FULLWORD	= (1 << 26),
+};
+
+enum LCM_DEV_CTRL_MPU68 {
+	LCM_DEV_CTRL_MPU68_80_SERIES	= (0 << 27),
+	LCM_DEV_CTRL_MPU68_68_SERIES	= (1 << 27),
+};
+
+enum LCM_DEV_CTRL_DE_POL {
+	LCM_DEV_CTRL_DE_POL_HIGH	= (0 << 28),
+	LCM_DEV_CTRL_DE_POL_LOW		= (1 << 28),
+};
+
+#define LCM_DEV_CTRL_CMD16		(29)
+#define LCM_DEV_CTRL_CM16t18		(30)
+#define LCM_DEV_CTRL_CMD_LOW		(31)
+
+/* MPU-Interface LCD Write Command */
+#define REG_LCM_MPU_CMD			(0x08)
+
+/* Interrupt Control/Status Register */
+#define REG_LCM_INT_CS			(0x0c)
+#define LCM_INT_CS_DISP_F_EN		(1 << 0)
+#define LCM_INT_CS_UNDERRUN_EN   	(1 << 1)
+#define LCM_INT_CS_BUS_ERROR_INT 	(1 << 28)
+#define LCM_INT_CS_UNDERRUN_INT  	(1 << 29)
+#define LCM_INT_CS_DISP_F_STATUS 	(1 << 30)
+#define LCM_INT_CS_DISP_F_INT		(1 << 31)
+
+/* CRTC Display Size Control Register */
+#define REG_LCM_CRTC_SIZE		(0x10)
+#define LCM_CRTC_SIZE_VTTVAL(x)		((x) << 16)
+#define LCM_CRTC_SIZE_HTTVAL(x)		((x) << 0)
+
+/* CRTC Display Enable End */
+#define REG_LCM_CRTC_DEND		(0x14)
+#define LCM_CRTC_DEND_VDENDVAL(x)	((x) << 16)
+#define LCM_CRTC_DEND_HDENDVAL(x)	((x) << 0)
+
+/* CRTC Internal Horizontal Retrace Control Register */
+#define REG_LCM_CRTC_HR			(0x18)
+#define LCM_CRTC_HR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HR_SVAL(x)		((x) << 0)
+
+/* CRTC Horizontal Sync Control Register */
+#define REG_LCM_CRTC_HSYNC		(0x1C)
+#define LCM_CRTC_HSYNC_SHIFTVAL(x)	((x) << 30)
+#define LCM_CRTC_HSYNC_EVAL(x)		((x) << 16)
+#define LCM_CRTC_HSYNC_SVAL(x)		((x) << 0)
+
+/* CRTC Internal Vertical Retrace Control Register */
+#define REG_LCM_CRTC_VR			(0x20)
+#define LCM_CRTC_VR_EVAL(x)		((x) << 16)
+#define LCM_CRTC_VR_SVAL(x)		((x) << 0)
+
+/* Video Stream Frame Buffer-0 Starting Address */
+#define REG_LCM_VA_BADDR0		(0x24)
+
+/* Video Stream Frame Buffer-1 Starting Address */
+#define REG_LCM_VA_BADDR1		(0x28)
+
+/* Video Stream Frame Buffer Control Register */
+#define REG_LCM_VA_FBCTRL		(0x2C)
+#define LCM_VA_FBCTRL_IO_REGION_HALF	(1 << 28)
+#define LCM_VA_FBCTRL_FIELD_DUAL  	(1 << 29)
+#define LCM_VA_FBCTRL_START_BUF 	(1 << 30)
+#define LCM_VA_FBCTRL_DB_EN		(1 << 31)
+
+/* Video Stream Scaling Control Register */
+#define REG_LCM_VA_SCALE		(0x30)
+#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
+#define LCM_VA_SCALE_XCOPY_DUPLICATION	 (1 << 15)
+
+/* Image Stream Active Window Coordinates */
+#define REG_LCM_VA_WIN			(0x38)
+
+/* Image Stream Stuff Pixel */
+#define REG_LCM_VA_STUFF		(0x3C)
+
+/* OSD Window Starting Coordinates */
+#define REG_LCM_OSD_WINS		(0x40)
+
+/* OSD Window Ending Coordinates */
+#define REG_LCM_OSD_WINE		(0x44)
+
+/* OSD Stream Frame Buffer Starting Address */
+#define REG_LCM_OSD_BADDR		(0x48)
+
+/* OSD Stream Frame Buffer Control Register */
+#define REG_LCM_OSD_FBCTRL		(0x4c)
+
+/* OSD Overlay Control Register */
+#define REG_LCM_OSD_OVERLAY		(0x50)
+
+/* OSD Overlay Color-Key Pattern Register */
+#define REG_LCM_OSD_CKEY		(0x54)
+
+/* OSD Overlay Color-Key Mask Register */
+#define REG_LCM_OSD_CMASK		(0x58)
+
+/* OSD Window Skip1 Register */
+#define REG_LCM_OSD_SKIP1		(0x5C)
+
+/* OSD Window Skip2 Register */
+#define REG_LCM_OSD_SKIP2		(0x60)
+
+/* OSD horizontal up scaling control register */
+#define REG_LCM_OSD_SCALE		(0x64)
+
+/* MPU Vsync control register */
+#define REG_LCM_MPU_VSYNC		(0x68)
+
+/* Hardware cursor control Register */
+#define REG_LCM_HC_CTRL			(0x6C)
+
+/* Hardware cursot tip point potison on va picture */
+#define REG_LCM_HC_POS			(0x70)
+
+/* Hardware Cursor Window Buffer Control Register */
+#define REG_LCM_HC_WBCTRL		(0x74)
+
+/* Hardware cursor memory base address register */
+#define REG_LCM_HC_BADDR		(0x78)
+
+/* Hardware cursor color ram register mapped to bpp = 0 */
+#define REG_LCM_HC_COLOR0		(0x7C)
+
+/* Hardware cursor color ram register mapped to bpp = 1 */
+#define REG_LCM_HC_COLOR1		(0x80)
+
+/* Hardware cursor color ram register mapped to bpp = 2 */
+#define REG_LCM_HC_COLOR2		(0x84)
+
+/* Hardware cursor color ram register mapped to bpp = 3 */
+#define REG_LCM_HC_COLOR3		(0x88)
+
+#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
diff --git a/arch/arm/mach-w90x900/include/mach/vmalloc.h b/arch/arm/mach-w90x900/include/mach/vmalloc.h
index 2f9dfb9..b067e44 100644
--- a/arch/arm/mach-w90x900/include/mach/vmalloc.h
+++ b/arch/arm/mach-w90x900/include/mach/vmalloc.h
@@ -18,6 +18,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	  (0xe0000000UL)
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index cef903b..b3edc3c 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -10,6 +10,8 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation;version 2 of the License.
+ *   history:
+ *     Wang Qiang (rurality.linux@gmail.com) add LCD support
  *
  */
 
@@ -18,9 +20,51 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
+#include <mach/regs-ldm.h>
+#include <mach/fb.h>
 
 #include "nuc950.h"
 
+#ifdef CONFIG_FB_NUC900
+/* LCD Controller */
+static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width 		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc950_lcd_info[0],
+#else
+	.displays		= nuc950_lcd_info,
+#endif
+	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
+#endif
+
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -30,6 +74,9 @@ static void __init nuc950evb_map_io(void)
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
+#ifdef CONFIG_FB_NUC900
+	nuc900_fb_set_platdata(&nuc950_fb_info);
+#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
index a47dc9a..fb7fb62 100644
--- a/arch/arm/mach-w90x900/mfp.c
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -36,9 +36,12 @@
 
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
+#define GPIOG22TO23	(0x03 << 22)
+
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
+#define ENAC97		(0x02 << 22)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -146,6 +149,9 @@ void mfp_set_groupg(struct device *dev)
 	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
 		mfpen &= ~(GPIOG2TO3);
 		mfpen |= ENI2C1;/*enable i2c1*/
+	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
+		mfpen &= ~(GPIOG22TO23);
+		mfpen |= ENAC97;/*enable AC97*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 1495081..4d1f1ab 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
+
 #include "cpu.h"
 
 /* define specific CPU platform device */
@@ -25,6 +26,9 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
+#ifdef CONFIG_FB_NUC900
+	&nuc900_device_lcd,
+#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index baf6384..101105e 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -399,7 +399,7 @@ config CPU_V6
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
 	depends on CPU_V6
-	default y if SMP && !ARCH_MX3
+	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.
 	  This enables the kernel to use some instructions not present
@@ -410,7 +410,7 @@ config CPU_32v6K
 # ARMv7
 config CPU_V7
 	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
-	select CPU_32v6K
+	select CPU_32v6K if !ARCH_OMAP2
 	select CPU_32v7
 	select CPU_ABRT_EV7
 	select CPU_PABRT_V7
@@ -572,6 +572,8 @@ config CPU_TLB_V6
 config CPU_TLB_V7
 	bool
 
+config VERIFY_PERMISSION_FAULT
+	bool
 endif
 
 config CPU_HAS_ASID
@@ -733,9 +735,34 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 
+config OUTER_CACHE_SYNC
+	bool
+	help
+	  The outer cache has a outer_cache_fns.sync function pointer
+	  that can be used to drain the write buffer of the outer cache.
+
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
 	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
@@ -754,15 +781,17 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	default y
 	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
 	help
 	  This option enables the L2x0 PrimeCell.
 
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
-	depends on ARCH_DOVE
+	depends on (ARCH_DOVE || ARCH_MMP)
 	default y
 	select OUTER_CACHE
 	help
@@ -779,5 +808,32 @@ config CACHE_XSC3L2
 
 config ARM_L1_CACHE_SHIFT
 	int
-	default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
+	default 6 if ARM_L1_CACHE_SHIFT_6
 	default 5
+
+config ARM_DMA_MEM_BUFFERABLE
+	bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+		     MACH_REALVIEW_PB11MP)
+	default y if CPU_V6 || CPU_V7
+	help
+	  Historically, the kernel has used strongly ordered mappings to
+	  provide DMA coherent memory.  With the advent of ARMv7, mapping
+	  memory with differing types results in unpredictable behaviour,
+	  so on these CPUs, this option is forced on.
+
+	  Multiple mappings with differing attributes is also unpredictable
+	  on ARMv6 CPUs, but since they do not have aggressive speculative
+	  prefetch, no harm appears to occur.
+
+	  However, drivers may be missing the necessary barriers for ARMv6,
+	  and therefore turning this on may result in unpredictable driver
+	  behaviour.  Therefore, we offer this as an option.
+
+	  You are recommended say 'Y' here and debug any affected drivers.
+
+config ARCH_HAS_BARRIERS
+	bool
+	help
+	  This option allows the use of custom mandatory barriers
+	  included via the mach/barriers.h file.
diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S
index 2e6dc04..ec88b15 100644
--- a/arch/arm/mm/abort-ev7.S
+++ b/arch/arm/mm/abort-ev7.S
@@ -29,5 +29,26 @@ ENTRY(v7_early_abort)
 	 * V6 code adjusts the returned DFSR.
 	 * New designs should not need to patch up faults.
 	 */
+
+#if defined(CONFIG_VERIFY_PERMISSION_FAULT)
+	/*
+	 * Detect erroneous permission failures and fix
+	 */
+	ldr	r3, =0x40d			@ On permission fault
+	and	r3, r1, r3
+	cmp	r3, #0x0d
+	movne	pc, lr
+
+	mcr	p15, 0, r0, c7, c8, 0   	@ Retranslate FAR
+	isb
+	mrc	p15, 0, r2, c7, c4, 0   	@ Read the PAR
+	and	r3, r2, #0x7b   		@ On translation fault
+	cmp	r3, #0x0b
+	movne	pc, lr
+	bic	r1, r1, #0xf			@ Fix up FSR FS[5:0]
+	and	r2, r2, #0x7e
+	orr	r1, r1, r2, LSR #1
+#endif
+
 	mov	pc, lr
 ENDPROC(v7_early_abort)
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index b270d62..6f98c35 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -11,11 +11,13 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/moduleparam.h>
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
@@ -77,6 +79,8 @@ static unsigned long ai_dword;
 static unsigned long ai_multi;
 static int ai_usermode;
 
+core_param(alignment, ai_usermode, int, 0600);
+
 #define UM_WARN		(1 << 0)
 #define UM_FIXUP	(1 << 1)
 #define UM_SIGNAL	(1 << 2)
@@ -91,36 +95,29 @@ static const char *usermode_action[] = {
 	"signal+warn"
 };
 
-static int
-proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
-		    void *data)
+static int alignment_proc_show(struct seq_file *m, void *v)
 {
-	char *p = page;
-	int len;
-
-	p += sprintf(p, "User:\t\t%lu\n", ai_user);
-	p += sprintf(p, "System:\t\t%lu\n", ai_sys);
-	p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
-	p += sprintf(p, "Half:\t\t%lu\n", ai_half);
-	p += sprintf(p, "Word:\t\t%lu\n", ai_word);
+	seq_printf(m, "User:\t\t%lu\n", ai_user);
+	seq_printf(m, "System:\t\t%lu\n", ai_sys);
+	seq_printf(m, "Skipped:\t%lu\n", ai_skipped);
+	seq_printf(m, "Half:\t\t%lu\n", ai_half);
+	seq_printf(m, "Word:\t\t%lu\n", ai_word);
 	if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
-		p += sprintf(p, "DWord:\t\t%lu\n", ai_dword);
-	p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
-	p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
+		seq_printf(m, "DWord:\t\t%lu\n", ai_dword);
+	seq_printf(m, "Multi:\t\t%lu\n", ai_multi);
+	seq_printf(m, "User faults:\t%i (%s)\n", ai_usermode,
 			usermode_action[ai_usermode]);
 
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
+	return 0;
+}
 
-	return len;
+static int alignment_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, alignment_proc_show, NULL);
 }
 
-static int proc_alignment_write(struct file *file, const char __user *buffer,
-				unsigned long count, void *data)
+static ssize_t alignment_proc_write(struct file *file, const char __user *buffer,
+				    size_t count, loff_t *pos)
 {
 	char mode;
 
@@ -133,6 +130,13 @@ static int proc_alignment_write(struct file *file, const char __user *buffer,
 	return count;
 }
 
+static const struct file_operations alignment_proc_fops = {
+	.open		= alignment_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= alignment_proc_write,
+};
 #endif /* CONFIG_PROC_FS */
 
 union offset_union {
@@ -163,15 +167,15 @@ union offset_union {
  THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
  THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
-	"	.section .fixup,\"ax\"\n"		\
+	"	.pushsection .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
 	"3:	mov	%0, #1\n"			\
 	"	b	2b\n"				\
-	"	.previous\n"				\
-	"	.section __ex_table,\"a\"\n"		\
+	"	.popsection\n"				\
+	"	.pushsection __ex_table,\"a\"\n"	\
 	"	.align	3\n"				\
 	"	.long	1b, 3b\n"			\
-	"	.previous\n"				\
+	"	.popsection\n"				\
 	: "=r" (err), "=&r" (val), "=r" (addr)		\
 	: "0" (err), "2" (addr))
 
@@ -223,16 +227,16 @@ union offset_union {
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
+		"	.pushsection .fixup,\"ax\"\n"		\
 		"	.align	2\n"				\
 		"4:	mov	%0, #1\n"			\
 		"	b	3b\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
+		"	.popsection\n"				\
+		"	.pushsection __ex_table,\"a\"\n"	\
 		"	.align	3\n"				\
 		"	.long	1b, 4b\n"			\
 		"	.long	2b, 4b\n"			\
-		"	.previous\n"				\
+		"	.popsection\n"				\
 		: "=r" (err), "=&r" (v), "=&r" (a)		\
 		: "0" (err), "1" (v), "2" (a));			\
 		if (err)					\
@@ -263,18 +267,18 @@ union offset_union {
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
+		"	.pushsection .fixup,\"ax\"\n"		\
 		"	.align	2\n"				\
 		"6:	mov	%0, #1\n"			\
 		"	b	5b\n"				\
-		"	.previous\n"				\
-		"	.section __ex_table,\"a\"\n"		\
+		"	.popsection\n"				\
+		"	.pushsection __ex_table,\"a\"\n"	\
 		"	.align	3\n"				\
 		"	.long	1b, 6b\n"			\
 		"	.long	2b, 6b\n"			\
 		"	.long	3b, 6b\n"			\
 		"	.long	4b, 6b\n"			\
-		"	.previous\n"				\
+		"	.popsection\n"				\
 		: "=r" (err), "=&r" (v), "=&r" (a)		\
 		: "0" (err), "1" (v), "2" (a));			\
 		if (err)					\
@@ -898,16 +902,10 @@ static int __init alignment_init(void)
 #ifdef CONFIG_PROC_FS
 	struct proc_dir_entry *res;
 
-	res = proc_mkdir("cpu", NULL);
+	res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL,
+			  &alignment_proc_fops);
 	if (!res)
 		return -ENOMEM;
-
-	res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, res);
-	if (!res)
-		return -ENOMEM;
-
-	res->read_proc = proc_alignment_read;
-	res->write_proc = proc_alignment_write;
 #endif
 
 	/*
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index a89444a..7148e53 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -157,7 +157,7 @@ ENTRY(fa_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(fa_dma_inv_range)
+fa_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
@@ -180,7 +180,7 @@ ENTRY(fa_dma_inv_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(fa_dma_clean_range)
+fa_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -205,6 +205,30 @@ ENTRY(fa_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(fa_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	fa_dma_clean_range
+	bcs	fa_dma_inv_range
+	b	fa_dma_flush_range
+ENDPROC(fa_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(fa_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(fa_dma_unmap_area)
+
 	__INITDATA
 
 	.type	fa_cache_fns, #object
@@ -215,7 +239,7 @@ ENTRY(fa_cache_fns)
 	.long	fa_coherent_kern_range
 	.long	fa_coherent_user_range
 	.long	fa_flush_kern_dcache_area
-	.long	fa_dma_inv_range
-	.long	fa_dma_clean_range
+	.long	fa_dma_map_area
+	.long	fa_dma_unmap_area
 	.long	fa_dma_flush_range
 	.size	fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index cb8fc65..9982eb3 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -27,29 +27,90 @@
 
 static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
+static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
 
 static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
+static inline void l2x0_clean_line(unsigned long addr)
+{
+	void __iomem *base = l2x0_base;
+	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
+}
+
+static inline void l2x0_inv_line(unsigned long addr)
+{
+	void __iomem *base = l2x0_base;
+	cache_wait(base + L2X0_INV_LINE_PA, 1);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
+}
+
+#ifdef CONFIG_PL310_ERRATA_588369
+static void debug_writel(unsigned long val)
+{
+	extern void omap_smc1(u32 fn, u32 arg);
+
+	/*
+	 * Texas Instrument secure monitor api to modify the
+	 * PL310 Debug Control Register.
+	 */
+	omap_smc1(0x100, val);
+}
+
+static inline void l2x0_flush_line(unsigned long addr)
+{
+	void __iomem *base = l2x0_base;
+
+	/* Clean by PA followed by Invalidate by PA */
+	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
+	cache_wait(base + L2X0_INV_LINE_PA, 1);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
+}
+#else
+
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
+}
+
+static inline void l2x0_flush_line(unsigned long addr)
+{
+	void __iomem *base = l2x0_base;
+	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
+}
+#endif
+
+static void l2x0_cache_sync(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l2x0_lock, flags);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
 static inline void l2x0_inv_all(void)
 {
 	unsigned long flags;
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0xff, l2x0_base + L2X0_INV_WAY);
-	cache_wait(l2x0_base + L2X0_INV_WAY, 0xff);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
@@ -62,23 +123,24 @@ static void l2x0_inv_range(unsigned long start, unsigned long end)
 	spin_lock_irqsave(&l2x0_lock, flags);
 	if (start & (CACHE_LINE_SIZE - 1)) {
 		start &= ~(CACHE_LINE_SIZE - 1);
-		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-		writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+		debug_writel(0x03);
+		l2x0_flush_line(start);
+		debug_writel(0x00);
 		start += CACHE_LINE_SIZE;
 	}
 
 	if (end & (CACHE_LINE_SIZE - 1)) {
 		end &= ~(CACHE_LINE_SIZE - 1);
-		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-		writel(end, base + L2X0_CLEAN_INV_LINE_PA);
+		debug_writel(0x03);
+		l2x0_flush_line(end);
+		debug_writel(0x00);
 	}
 
 	while (start < end) {
 		unsigned long blk_end = start + min(end - start, 4096UL);
 
 		while (start < blk_end) {
-			cache_wait(base + L2X0_INV_LINE_PA, 1);
-			writel(start, base + L2X0_INV_LINE_PA);
+			l2x0_inv_line(start);
 			start += CACHE_LINE_SIZE;
 		}
 
@@ -103,8 +165,7 @@ static void l2x0_clean_range(unsigned long start, unsigned long end)
 		unsigned long blk_end = start + min(end - start, 4096UL);
 
 		while (start < blk_end) {
-			cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-			writel(start, base + L2X0_CLEAN_LINE_PA);
+			l2x0_clean_line(start);
 			start += CACHE_LINE_SIZE;
 		}
 
@@ -128,11 +189,12 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
 	while (start < end) {
 		unsigned long blk_end = start + min(end - start, 4096UL);
 
+		debug_writel(0x03);
 		while (start < blk_end) {
-			cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-			writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+			l2x0_flush_line(start);
 			start += CACHE_LINE_SIZE;
 		}
+		debug_writel(0x00);
 
 		if (blk_end < end) {
 			spin_unlock_irqrestore(&l2x0_lock, flags);
@@ -147,32 +209,62 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 {
 	__u32 aux;
+	__u32 cache_id;
+	int ways;
+	const char *type;
 
 	l2x0_base = base;
 
+	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	aux &= aux_mask;
+	aux |= aux_val;
+
+	/* Determine the number of ways */
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+	case L2X0_CACHE_ID_PART_L310:
+		if (aux & (1 << 16))
+			ways = 16;
+		else
+			ways = 8;
+		type = "L310";
+		break;
+	case L2X0_CACHE_ID_PART_L210:
+		ways = (aux >> 13) & 0xf;
+		type = "L210";
+		break;
+	default:
+		/* Assume unknown chips have 8 ways */
+		ways = 8;
+		type = "L2x0 series";
+		break;
+	}
+
+	l2x0_way_mask = (1 << ways) - 1;
+
 	/*
 	 * Check if l2x0 controller is already enabled.
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
 
 		/* l2x0 controller is disabled */
-
-		aux = readl(l2x0_base + L2X0_AUX_CTRL);
-		aux &= aux_mask;
-		aux |= aux_val;
-		writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
 		l2x0_inv_all();
 
 		/* enable L2X0 */
-		writel(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
+	outer_cache.sync = l2x0_cache_sync;
 
-	printk(KERN_INFO "L2X0 cache controller enabled\n");
+	printk(KERN_INFO "%s cache controller enabled\n", type);
+	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
+			 ways, cache_id, aux);
 }
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 2a48273..c2ff3c5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -84,20 +84,6 @@ ENTRY(v3_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v3_dma_inv_range)
-	/* FALLTHROUGH */
-
-/*
  *	dma_flush_range(start, end)
  *
  *	Clean and invalidate the specified virtual address range.
@@ -108,18 +94,29 @@ ENTRY(v3_dma_inv_range)
 ENTRY(v3_dma_flush_range)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c0, 0		@ flush ID cache
+	mov	pc, lr
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v3_dma_unmap_area)
+	teq	r2, #DMA_TO_DEVICE
+	bne	v3_dma_flush_range
 	/* FALLTHROUGH */
 
 /*
- *	dma_clean_range(start, end)
- *
- *	Clean (write back) the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
  */
-ENTRY(v3_dma_clean_range)
+ENTRY(v3_dma_map_area)
 	mov	pc, lr
+ENDPROC(v3_dma_unmap_area)
+ENDPROC(v3_dma_map_area)
 
 	__INITDATA
 
@@ -131,7 +128,7 @@ ENTRY(v3_cache_fns)
 	.long	v3_coherent_kern_range
 	.long	v3_coherent_user_range
 	.long	v3_flush_kern_dcache_area
-	.long	v3_dma_inv_range
-	.long	v3_dma_clean_range
+	.long	v3_dma_map_area
+	.long	v3_dma_unmap_area
 	.long	v3_dma_flush_range
 	.size	v3_cache_fns, . - v3_cache_fns
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 5c7da3e..4810f7e 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -94,20 +94,6 @@ ENTRY(v4_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4_dma_inv_range)
-	/* FALLTHROUGH */
-
-/*
  *	dma_flush_range(start, end)
  *
  *	Clean and invalidate the specified virtual address range.
@@ -120,18 +106,29 @@ ENTRY(v4_dma_flush_range)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
 #endif
+	mov	pc, lr
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v4_dma_unmap_area)
+	teq	r2, #DMA_TO_DEVICE
+	bne	v4_dma_flush_range
 	/* FALLTHROUGH */
 
 /*
- *	dma_clean_range(start, end)
- *
- *	Clean (write back) the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
  */
-ENTRY(v4_dma_clean_range)
+ENTRY(v4_dma_map_area)
 	mov	pc, lr
+ENDPROC(v4_dma_unmap_area)
+ENDPROC(v4_dma_map_area)
 
 	__INITDATA
 
@@ -143,7 +140,7 @@ ENTRY(v4_cache_fns)
 	.long	v4_coherent_kern_range
 	.long	v4_coherent_user_range
 	.long	v4_flush_kern_dcache_area
-	.long	v4_dma_inv_range
-	.long	v4_dma_clean_range
+	.long	v4_dma_map_area
+	.long	v4_dma_unmap_area
 	.long	v4_dma_flush_range
 	.size	v4_cache_fns, . - v4_cache_fns
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 3dbedf1e..df8368a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -173,7 +173,7 @@ ENTRY(v4wb_coherent_user_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wb_dma_inv_range)
+v4wb_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -194,7 +194,7 @@ ENTRY(v4wb_dma_inv_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wb_dma_clean_range)
+v4wb_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -216,6 +216,30 @@ ENTRY(v4wb_dma_clean_range)
 	.globl	v4wb_dma_flush_range
 	.set	v4wb_dma_flush_range, v4wb_coherent_kern_range
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v4wb_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	v4wb_dma_clean_range
+	bcs	v4wb_dma_inv_range
+	b	v4wb_dma_flush_range
+ENDPROC(v4wb_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v4wb_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(v4wb_dma_unmap_area)
+
 	__INITDATA
 
 	.type	v4wb_cache_fns, #object
@@ -226,7 +250,7 @@ ENTRY(v4wb_cache_fns)
 	.long	v4wb_coherent_kern_range
 	.long	v4wb_coherent_user_range
 	.long	v4wb_flush_kern_dcache_area
-	.long	v4wb_dma_inv_range
-	.long	v4wb_dma_clean_range
+	.long	v4wb_dma_map_area
+	.long	v4wb_dma_unmap_area
 	.long	v4wb_dma_flush_range
 	.size	v4wb_cache_fns, . - v4wb_cache_fns
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index b3b7410..45c7031 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -142,23 +142,12 @@ ENTRY(v4wt_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(v4wt_dma_inv_range)
+v4wt_dma_inv_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
 	blo	1b
-	/* FALLTHROUGH */
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4wt_dma_clean_range)
 	mov	pc, lr
 
 /*
@@ -172,6 +161,29 @@ ENTRY(v4wt_dma_clean_range)
 	.globl	v4wt_dma_flush_range
 	.equ	v4wt_dma_flush_range, v4wt_dma_inv_range
 
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v4wt_dma_unmap_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v4wt_dma_inv_range
+	/* FALLTHROUGH */
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v4wt_dma_map_area)
+	mov	pc, lr
+ENDPROC(v4wt_dma_unmap_area)
+ENDPROC(v4wt_dma_map_area)
+
 	__INITDATA
 
 	.type	v4wt_cache_fns, #object
@@ -182,7 +194,7 @@ ENTRY(v4wt_cache_fns)
 	.long	v4wt_coherent_kern_range
 	.long	v4wt_coherent_user_range
 	.long	v4wt_flush_kern_dcache_area
-	.long	v4wt_dma_inv_range
-	.long	v4wt_dma_clean_range
+	.long	v4wt_dma_map_area
+	.long	v4wt_dma_unmap_area
 	.long	v4wt_dma_flush_range
 	.size	v4wt_cache_fns, . - v4wt_cache_fns
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 4ba0a24..86aa689 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -195,7 +195,7 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v6_dma_inv_range)
+v6_dma_inv_range:
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,6 +211,10 @@ ENTRY(v6_dma_inv_range)
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -228,9 +232,12 @@ ENTRY(v6_dma_inv_range)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v6_dma_clean_range)
+v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
 #else
@@ -251,6 +258,10 @@ ENTRY(v6_dma_clean_range)
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
+#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@@ -263,6 +274,40 @@ ENTRY(v6_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v6_dma_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_FROM_DEVICE
+	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
+	teq	r2, #DMA_TO_DEVICE
+	beq	v6_dma_clean_range
+	b	v6_dma_flush_range
+#endif
+ENDPROC(v6_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
+	mov	pc, lr
+ENDPROC(v6_dma_unmap_area)
+
 	__INITDATA
 
 	.type	v6_cache_fns, #object
@@ -273,7 +318,7 @@ ENTRY(v6_cache_fns)
 	.long	v6_coherent_kern_range
 	.long	v6_coherent_user_range
 	.long	v6_flush_kern_dcache_area
-	.long	v6_dma_inv_range
-	.long	v6_dma_clean_range
+	.long	v6_dma_map_area
+	.long	v6_dma_unmap_area
 	.long	v6_dma_flush_range
 	.size	v6_cache_fns, . - v6_cache_fns
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 9073db8..37c8157 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -91,7 +91,11 @@ ENTRY(v7_flush_kern_cache_all)
  THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c7, c1, 0		@ invalidate I-cache inner shareable
+#else
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#endif
  ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
  THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
@@ -167,7 +171,11 @@ ENTRY(v7_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c7, c1, 6		@ invalidate BTB Inner Shareable
+#else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
+#endif
 	dsb
 	isb
 	mov	pc, lr
@@ -216,7 +224,7 @@ ENDPROC(v7_flush_kern_dcache_area)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	tst	r0, r3
@@ -240,7 +248,7 @@ ENDPROC(v7_dma_inv_range)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
@@ -271,6 +279,32 @@ ENTRY(v7_dma_flush_range)
 	mov	pc, lr
 ENDPROC(v7_dma_flush_range)
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v7_dma_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_FROM_DEVICE
+	beq	v7_dma_inv_range
+	b	v7_dma_clean_range
+ENDPROC(v7_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v7_dma_unmap_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v7_dma_inv_range
+	mov	pc, lr
+ENDPROC(v7_dma_unmap_area)
+
 	__INITDATA
 
 	.type	v7_cache_fns, #object
@@ -281,7 +315,7 @@ ENTRY(v7_cache_fns)
 	.long	v7_coherent_kern_range
 	.long	v7_coherent_user_range
 	.long	v7_flush_kern_dcache_area
-	.long	v7_dma_inv_range
-	.long	v7_dma_clean_range
+	.long	v7_dma_map_area
+	.long	v7_dma_unmap_area
 	.long	v7_dma_flush_range
 	.size	v7_cache_fns, . - v7_cache_fns
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index a9e22e3..b0ee9ba 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -10,12 +10,17 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
 
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
 static DEFINE_SPINLOCK(cpu_asid_lock);
 unsigned int cpu_last_asid = ASID_FIRST_VERSION;
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(struct mm_struct *, current_mm);
+#endif
 
 /*
  * We fork()ed a process, and we need a new context for the child
@@ -26,13 +31,109 @@ unsigned int cpu_last_asid = ASID_FIRST_VERSION;
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
 	mm->context.id = 0;
+	spin_lock_init(&mm->context.id_lock);
 }
 
+static void flush_context(void)
+{
+	/* set the reserved ASID before flushing the TLB */
+	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+	isb();
+	local_flush_tlb_all();
+	if (icache_is_vivt_asid_tagged()) {
+		__flush_icache_all();
+		dsb();
+	}
+}
+
+#ifdef CONFIG_SMP
+
+static void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+	unsigned long flags;
+
+	/*
+	 * Locking needed for multi-threaded applications where the
+	 * same mm->context.id could be set from different CPUs during
+	 * the broadcast. This function is also called via IPI so the
+	 * mm->context.id_lock has to be IRQ-safe.
+	 */
+	spin_lock_irqsave(&mm->context.id_lock, flags);
+	if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) {
+		/*
+		 * Old version of ASID found. Set the new one and
+		 * reset mm_cpumask(mm).
+		 */
+		mm->context.id = asid;
+		cpumask_clear(mm_cpumask(mm));
+	}
+	spin_unlock_irqrestore(&mm->context.id_lock, flags);
+
+	/*
+	 * Set the mm_cpumask(mm) bit for the current CPU.
+	 */
+	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+}
+
+/*
+ * Reset the ASID on the current CPU. This function call is broadcast
+ * from the CPU handling the ASID rollover and holding cpu_asid_lock.
+ */
+static void reset_context(void *info)
+{
+	unsigned int asid;
+	unsigned int cpu = smp_processor_id();
+	struct mm_struct *mm = per_cpu(current_mm, cpu);
+
+	/*
+	 * Check if a current_mm was set on this CPU as it might still
+	 * be in the early booting stages and using the reserved ASID.
+	 */
+	if (!mm)
+		return;
+
+	smp_rmb();
+	asid = cpu_last_asid + cpu + 1;
+
+	flush_context();
+	set_mm_context(mm, asid);
+
+	/* set the new ASID */
+	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (mm->context.id));
+	isb();
+}
+
+#else
+
+static inline void set_mm_context(struct mm_struct *mm, unsigned int asid)
+{
+	mm->context.id = asid;
+	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
+}
+
+#endif
+
 void __new_context(struct mm_struct *mm)
 {
 	unsigned int asid;
 
 	spin_lock(&cpu_asid_lock);
+#ifdef CONFIG_SMP
+	/*
+	 * Check the ASID again, in case the change was broadcast from
+	 * another CPU before we acquired the lock.
+	 */
+	if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) {
+		cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
+		spin_unlock(&cpu_asid_lock);
+		return;
+	}
+#endif
+	/*
+	 * At this point, it is guaranteed that the current mm (with
+	 * an old ASID) isn't active on any other CPU since the ASIDs
+	 * are changed simultaneously via IPI.
+	 */
 	asid = ++cpu_last_asid;
 	if (asid == 0)
 		asid = cpu_last_asid = ASID_FIRST_VERSION;
@@ -42,20 +143,15 @@ void __new_context(struct mm_struct *mm)
 	 * to start a new version and flush the TLB.
 	 */
 	if (unlikely((asid & ~ASID_MASK) == 0)) {
-		asid = ++cpu_last_asid;
-		/* set the reserved ASID before flushing the TLB */
-		asm("mcr	p15, 0, %0, c13, c0, 1	@ set reserved context ID\n"
-		    :
-		    : "r" (0));
-		isb();
-		flush_tlb_all();
-		if (icache_is_vivt_asid_tagged()) {
-			__flush_icache_all();
-			dsb();
-		}
+		asid = cpu_last_asid + smp_processor_id() + 1;
+		flush_context();
+#ifdef CONFIG_SMP
+		smp_wmb();
+		smp_call_function(reset_context, NULL, 1);
+#endif
+		cpu_last_asid += NR_CPUS;
 	}
-	spin_unlock(&cpu_asid_lock);
 
-	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
-	mm->context.id = asid;
+	set_mm_context(mm, asid);
+	spin_unlock(&cpu_asid_lock);
 }
diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c
index b2a6008..d2852e1 100644
--- a/arch/arm/mm/copypage-fa.c
+++ b/arch/arm/mm/copypage-fa.c
@@ -40,7 +40,7 @@ fa_copy_user_page(void *kto, const void *kfrom)
 }
 
 void fa_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c
index 70997d5..ac163de 100644
--- a/arch/arm/mm/copypage-feroceon.c
+++ b/arch/arm/mm/copypage-feroceon.c
@@ -18,7 +18,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %0				\n\
+	mov	ip, %2				\n\
 1:	mov	lr, r1				\n\
 	ldmia	r1!, {r2 - r9}			\n\
 	pld	[lr, #32]			\n\
@@ -64,16 +64,17 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
 	ldmfd	sp!, {r4-r9, pc}"
 	:
-	: "I" (PAGE_SIZE));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
 	kto = kmap_atomic(to, KM_USER0);
 	kfrom = kmap_atomic(from, KM_USER1);
+	flush_cache_page(vma, vaddr, page_to_pfn(from));
 	feroceon_copy_user_page(kto, kfrom);
 	kunmap_atomic(kfrom, KM_USER1);
 	kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c
index de9c068..f72303e 100644
--- a/arch/arm/mm/copypage-v3.c
+++ b/arch/arm/mm/copypage-v3.c
@@ -38,7 +38,7 @@ v3_copy_user_page(void *kto, const void *kfrom)
 }
 
 void v3_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7370a71..598c51a 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -69,7 +69,7 @@ mc_copy_user_page(void *from, void *to)
 }
 
 void v4_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c
index 9ab0984..cb589cb 100644
--- a/arch/arm/mm/copypage-v4wb.c
+++ b/arch/arm/mm/copypage-v4wb.c
@@ -27,7 +27,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
@@ -44,16 +44,17 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
 	ldmfd	 sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
 	kto = kmap_atomic(to, KM_USER0);
 	kfrom = kmap_atomic(from, KM_USER1);
+	flush_cache_page(vma, vaddr, page_to_pfn(from));
 	v4wb_copy_user_page(kto, kfrom);
 	kunmap_atomic(kfrom, KM_USER1);
 	kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c
index 300efaf..30c7d04 100644
--- a/arch/arm/mm/copypage-v4wt.c
+++ b/arch/arm/mm/copypage-v4wt.c
@@ -25,7 +25,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
@@ -40,11 +40,11 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
 	ldmfd	sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 0fa1319..f55fa10 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -34,21 +34,14 @@ static DEFINE_SPINLOCK(v6_lock);
  * attack the kernel's existing mapping of these pages.
  */
 static void v6_copy_user_highpage_nonaliasing(struct page *to,
-	struct page *from, unsigned long vaddr)
+	struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
 	kfrom = kmap_atomic(from, KM_USER0);
 	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * kmap_atomic() doesn't set the page virtual address, and
-	 * kunmap_atomic() takes care of cache flushing already.
-	 */
-	if (page_address(to) != NULL)
-#endif
-		__cpuc_flush_dcache_area(kto, PAGE_SIZE);
+	__cpuc_flush_dcache_area(kto, PAGE_SIZE);
 	kunmap_atomic(kto, KM_USER1);
 	kunmap_atomic(kfrom, KM_USER0);
 }
@@ -81,7 +74,7 @@ static void discard_old_kernel_data(void *kto)
  * Copy the page, taking account of the cache colour.
  */
 static void v6_copy_user_highpage_aliasing(struct page *to,
-	struct page *from, unsigned long vaddr)
+	struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
 {
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long kfrom, kto;
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index bc4525f..f9cde07 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -34,7 +34,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %0				\n\
+	mov	lr, %2				\n\
 						\n\
 	pld	[r1, #0]			\n\
 	pld	[r1, #32]			\n\
@@ -67,16 +67,17 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 						\n\
 	ldmfd	sp!, {r4, r5, pc}"
 	:
-	: "I" (PAGE_SIZE / 64 - 1));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
 	kto = kmap_atomic(to, KM_USER0);
 	kfrom = kmap_atomic(from, KM_USER1);
+	flush_cache_page(vma, vaddr, page_to_pfn(from));
 	xsc3_mc_copy_user_page(kto, kfrom);
 	kunmap_atomic(kfrom, KM_USER1);
 	kunmap_atomic(kto, KM_USER0);
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 76824d3..9920c0a 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -91,7 +91,7 @@ mc_copy_user_page(void *from, void *to)
 }
 
 void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 26325cb..9e7742f 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -11,7 +11,7 @@
  */
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/init.h>
@@ -24,18 +24,6 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_END	(0xffe00000)
-#define CONSISTENT_BASE	(CONSISTENT_END - CONSISTENT_DMA_SIZE)
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = ISA_DMA_THRESHOLD;
@@ -126,6 +114,15 @@ static void __dma_free_buffer(struct page *page, size_t size)
 }
 
 #ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -404,78 +401,44 @@ EXPORT_SYMBOL(dma_free_coherent);
  * platforms with CONFIG_DMABOUNCE.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-void dma_cache_maint(const void *start, size_t size, int direction)
+void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
+	enum dma_data_direction dir)
 {
-	void (*inner_op)(const void *, const void *);
-	void (*outer_op)(unsigned long, unsigned long);
-
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
-
-	switch (direction) {
-	case DMA_FROM_DEVICE:		/* invalidate only */
-		inner_op = dmac_inv_range;
-		outer_op = outer_inv_range;
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		inner_op = dmac_clean_range;
-		outer_op = outer_clean_range;
-		break;
-	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		inner_op = dmac_flush_range;
-		outer_op = outer_flush_range;
-		break;
-	default:
-		BUG();
-	}
+	unsigned long paddr;
+
+	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
+
+	dmac_map_area(kaddr, size, dir);
 
-	inner_op(start, start + size);
-	outer_op(__pa(start), __pa(start) + size);
+	paddr = __pa(kaddr);
+	if (dir == DMA_FROM_DEVICE) {
+		outer_inv_range(paddr, paddr + size);
+	} else {
+		outer_clean_range(paddr, paddr + size);
+	}
+	/* FIXME: non-speculating: flush on bidirectional mappings? */
 }
-EXPORT_SYMBOL(dma_cache_maint);
+EXPORT_SYMBOL(___dma_single_cpu_to_dev);
 
-static void dma_cache_maint_contiguous(struct page *page, unsigned long offset,
-				       size_t size, int direction)
+void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
+	enum dma_data_direction dir)
 {
-	void *vaddr;
-	unsigned long paddr;
-	void (*inner_op)(const void *, const void *);
-	void (*outer_op)(unsigned long, unsigned long);
-
-	switch (direction) {
-	case DMA_FROM_DEVICE:		/* invalidate only */
-		inner_op = dmac_inv_range;
-		outer_op = outer_inv_range;
-		break;
-	case DMA_TO_DEVICE:		/* writeback only */
-		inner_op = dmac_clean_range;
-		outer_op = outer_clean_range;
-		break;
-	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		inner_op = dmac_flush_range;
-		outer_op = outer_flush_range;
-		break;
-	default:
-		BUG();
-	}
+	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
 
-	if (!PageHighMem(page)) {
-		vaddr = page_address(page) + offset;
-		inner_op(vaddr, vaddr + size);
-	} else {
-		vaddr = kmap_high_get(page);
-		if (vaddr) {
-			vaddr += offset;
-			inner_op(vaddr, vaddr + size);
-			kunmap_high(page);
-		}
+	/* FIXME: non-speculating: not required */
+	/* don't bother invalidating if DMA to device */
+	if (dir != DMA_TO_DEVICE) {
+		unsigned long paddr = __pa(kaddr);
+		outer_inv_range(paddr, paddr + size);
 	}
 
-	paddr = page_to_phys(page) + offset;
-	outer_op(paddr, paddr + size);
+	dmac_unmap_area(kaddr, size, dir);
 }
+EXPORT_SYMBOL(___dma_single_dev_to_cpu);
 
-void dma_cache_maint_page(struct page *page, unsigned long offset,
-			  size_t size, int dir)
+static void dma_cache_maint_page(struct page *page, unsigned long offset,
+	size_t size, enum dma_data_direction dir,
+	void (*op)(const void *, size_t, int))
 {
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
@@ -486,20 +449,67 @@ void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t left = size;
 	do {
 		size_t len = left;
-		if (PageHighMem(page) && len + offset > PAGE_SIZE) {
-			if (offset >= PAGE_SIZE) {
-				page += offset / PAGE_SIZE;
-				offset %= PAGE_SIZE;
+		void *vaddr;
+
+		if (PageHighMem(page)) {
+			if (len + offset > PAGE_SIZE) {
+				if (offset >= PAGE_SIZE) {
+					page += offset / PAGE_SIZE;
+					offset %= PAGE_SIZE;
+				}
+				len = PAGE_SIZE - offset;
 			}
-			len = PAGE_SIZE - offset;
+			vaddr = kmap_high_get(page);
+			if (vaddr) {
+				vaddr += offset;
+				op(vaddr, len, dir);
+				kunmap_high(page);
+			} else if (cache_is_vipt()) {
+				pte_t saved_pte;
+				vaddr = kmap_high_l1_vipt(page, &saved_pte);
+				op(vaddr + offset, len, dir);
+				kunmap_high_l1_vipt(page, saved_pte);
+			}
+		} else {
+			vaddr = page_address(page) + offset;
+			op(vaddr, len, dir);
 		}
-		dma_cache_maint_contiguous(page, offset, len, dir);
 		offset = 0;
 		page++;
 		left -= len;
 	} while (left);
 }
-EXPORT_SYMBOL(dma_cache_maint_page);
+
+void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
+	size_t size, enum dma_data_direction dir)
+{
+	unsigned long paddr;
+
+	dma_cache_maint_page(page, off, size, dir, dmac_map_area);
+
+	paddr = page_to_phys(page) + off;
+	if (dir == DMA_FROM_DEVICE) {
+		outer_inv_range(paddr, paddr + size);
+	} else {
+		outer_clean_range(paddr, paddr + size);
+	}
+	/* FIXME: non-speculating: flush on bidirectional mappings? */
+}
+EXPORT_SYMBOL(___dma_page_cpu_to_dev);
+
+void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
+	size_t size, enum dma_data_direction dir)
+{
+	unsigned long paddr = page_to_phys(page) + off;
+
+	/* FIXME: non-speculating: not required */
+	/* don't bother invalidating if DMA to device */
+	if (dir != DMA_TO_DEVICE)
+		outer_inv_range(paddr, paddr + size);
+
+	dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+}
+EXPORT_SYMBOL(___dma_page_dev_to_cpu);
 
 /**
  * dma_map_sg - map a set of SG buffers for streaming mode DMA
@@ -573,8 +583,12 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nents, i) {
-		dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
-					sg_dma_len(s), dir);
+		if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
+					    sg_dma_len(s), dir))
+			continue;
+
+		__dma_page_dev_to_cpu(sg_page(s), s->offset,
+				      s->length, dir);
 	}
 }
 EXPORT_SYMBOL(dma_sync_sg_for_cpu);
@@ -597,9 +611,8 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 					sg_dma_len(s), dir))
 			continue;
 
-		if (!arch_is_coherent())
-			dma_cache_maint_page(sg_page(s), s->offset,
-					     s->length, dir);
+		__dma_page_cpu_to_dev(sg_page(s), s->offset,
+				      s->length, dir);
 	}
 }
 EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 56ee153..9b906de 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -16,6 +16,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
+#include <linux/gfp.h>
 
 #include <asm/bugs.h>
 #include <asm/cacheflush.h>
@@ -36,28 +37,12 @@ static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
  * Therefore those configurations which might call adjust_pte (those
  * without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
  */
-static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
+static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
+	unsigned long pfn, pte_t *ptep)
 {
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte, entry;
+	pte_t entry = *ptep;
 	int ret;
 
-	pgd = pgd_offset(vma->vm_mm, address);
-	if (pgd_none(*pgd))
-		goto no_pgd;
-	if (pgd_bad(*pgd))
-		goto bad_pgd;
-
-	pmd = pmd_offset(pgd, address);
-	if (pmd_none(*pmd))
-		goto no_pmd;
-	if (pmd_bad(*pmd))
-		goto bad_pmd;
-
-	pte = pte_offset_map(pmd, address);
-	entry = *pte;
-
 	/*
 	 * If this page is present, it's actually being shared.
 	 */
@@ -68,33 +53,55 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
 	if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
-		unsigned long pfn = pte_pfn(entry);
 		flush_cache_page(vma, address, pfn);
 		outer_flush_range((pfn << PAGE_SHIFT),
 				  (pfn << PAGE_SHIFT) + PAGE_SIZE);
 		pte_val(entry) &= ~L_PTE_MT_MASK;
 		pte_val(entry) |= shared_pte_mask;
-		set_pte_at(vma->vm_mm, address, pte, entry);
+		set_pte_at(vma->vm_mm, address, ptep, entry);
 		flush_tlb_page(vma, address);
 	}
-	pte_unmap(pte);
+
 	return ret;
+}
+
+static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
+	unsigned long pfn)
+{
+	spinlock_t *ptl;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int ret;
+
+	pgd = pgd_offset(vma->vm_mm, address);
+	if (pgd_none_or_clear_bad(pgd))
+		return 0;
+
+	pmd = pmd_offset(pgd, address);
+	if (pmd_none_or_clear_bad(pmd))
+		return 0;
 
-bad_pgd:
-	pgd_ERROR(*pgd);
-	pgd_clear(pgd);
-no_pgd:
-	return 0;
-
-bad_pmd:
-	pmd_ERROR(*pmd);
-	pmd_clear(pmd);
-no_pmd:
-	return 0;
+	/*
+	 * This is called while another page table is mapped, so we
+	 * must use the nested version.  This also means we need to
+	 * open-code the spin-locking.
+	 */
+	ptl = pte_lockptr(vma->vm_mm, pmd);
+	pte = pte_offset_map_nested(pmd, address);
+	spin_lock(ptl);
+
+	ret = do_adjust_pte(vma, address, pfn, pte);
+
+	spin_unlock(ptl);
+	pte_unmap_nested(pte);
+
+	return ret;
 }
 
 static void
-make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn)
+make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
+	unsigned long addr, pte_t *ptep, unsigned long pfn)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	struct vm_area_struct *mpnt;
@@ -122,13 +129,11 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigne
 		if (!(mpnt->vm_flags & VM_MAYSHARE))
 			continue;
 		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		aliases += adjust_pte(mpnt, mpnt->vm_start + offset);
+		aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
 	}
 	flush_dcache_mmap_unlock(mapping);
 	if (aliases)
-		adjust_pte(vma, addr);
-	else
-		flush_cache_page(vma, addr, pfn);
+		do_adjust_pte(vma, addr, pfn, ptep);
 }
 
 /*
@@ -144,9 +149,10 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigne
  *
  * Note that the pte lock will be held.
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+	pte_t *ptep)
 {
-	unsigned long pfn = pte_pfn(pte);
+	unsigned long pfn = pte_pfn(*ptep);
 	struct address_space *mapping;
 	struct page *page;
 
@@ -168,7 +174,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 #endif
 	if (mapping) {
 		if (cache_is_vivt())
-			make_coherent(mapping, vma, addr, pfn);
+			make_coherent(mapping, vma, addr, ptep, pfn);
 		else if (vma->vm_flags & VM_EXEC)
 			__flush_icache_all();
 	}
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 10e0680..cbfb2ed 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -18,6 +18,7 @@
 #include <linux/page-flags.h>
 #include <linux/sched.h>
 #include <linux/highmem.h>
+#include <linux/perf_event.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -302,6 +303,12 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	fault = __do_page_fault(mm, addr, fsr, tsk);
 	up_read(&mm->mmap_sem);
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, addr);
+	if (fault & VM_FAULT_MAJOR)
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, addr);
+	else if (fault & VM_FAULT_MINOR)
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, addr);
+
 	/*
 	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
 	 */
@@ -386,6 +393,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	if (addr < TASK_SIZE)
 		return do_page_fault(addr, fsr, regs);
 
+	if (user_mode(regs))
+		goto bad_area;
+
 	index = pgd_index(addr);
 
 	/*
@@ -456,7 +466,12 @@ static struct fsr_info {
 	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
 	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
+/* Do we need runtime check ? */
+#if __LINUX_ARM_ARCH__ < 6
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
+#else
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"I-cache maintenance fault"	   },
+#endif
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 6f3a4b7..c6844cb 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -13,6 +13,8 @@
 
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
+#include <asm/highmem.h>
+#include <asm/smp_plat.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 
@@ -87,13 +89,26 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
 		__flush_icache_all();
 }
+#else
+#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+#endif
+
+#ifdef CONFIG_SMP
+static void flush_ptrace_access_other(void *args)
+{
+	__flush_icache_all();
+}
+#endif
 
+static
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr,
-			 unsigned long len, int write)
+			 unsigned long uaddr, void *kaddr, unsigned long len)
 {
 	if (cache_is_vivt()) {
-		vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+			unsigned long addr = (unsigned long)kaddr;
+			__cpuc_coherent_kern_range(addr, addr + len);
+		}
 		return;
 	}
 
@@ -104,34 +119,59 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	}
 
 	/* VIPT non-aliasing cache */
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
-	    vma->vm_flags & VM_EXEC) {
+	if (vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
-		/* only flushing the kernel mapping on non-aliasing VIPT */
 		__cpuc_coherent_kern_range(addr, addr + len);
+#ifdef CONFIG_SMP
+		if (cache_ops_need_broadcast())
+			smp_call_function(flush_ptrace_access_other,
+					  NULL, 1);
+#endif
 	}
 }
-#else
-#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+#ifdef CONFIG_SMP
+	preempt_disable();
 #endif
+	memcpy(dst, src, len);
+	flush_ptrace_access(vma, page, uaddr, dst, len);
+#ifdef CONFIG_SMP
+	preempt_enable();
+#endif
+}
 
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
-	void *addr = page_address(page);
-
 	/*
 	 * Writeback any data associated with the kernel mapping of this
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * kmap_atomic() doesn't set the page virtual address, and
-	 * kunmap_atomic() takes care of cache flushing already.
-	 */
-	if (addr)
-#endif
-		__cpuc_flush_dcache_area(addr, PAGE_SIZE);
+	if (!PageHighMem(page)) {
+		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
+	} else {
+		void *addr = kmap_high_get(page);
+		if (addr) {
+			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
+			kunmap_high(page);
+		} else if (cache_is_vipt()) {
+			pte_t saved_pte;
+			addr = kmap_high_l1_vipt(page, &saved_pte);
+			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
+			kunmap_high_l1_vipt(page, saved_pte);
+		}
+	}
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 2be1ec7..6ab2440 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -48,7 +48,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	debug_kmap_atomic(type);
 
-	kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * There is no cache coherency issue when non VIVT, so force the
+	 * dedicated kmap usage for better debugging purposes in that case.
+	 */
+	if (!cache_is_vivt())
+		kmap = NULL;
+	else
+#endif
+		kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
 
@@ -79,7 +88,8 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
 
 	if (kvaddr >= (void *)FIXADDR_START) {
-		__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
+		if (cache_is_vivt())
+			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
 #ifdef CONFIG_DEBUG_HIGHMEM
 		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
 		set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
@@ -124,3 +134,90 @@ struct page *kmap_atomic_to_page(const void *ptr)
 	pte = TOP_PTE(vaddr);
 	return pte_page(*pte);
 }
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+
+#include <linux/percpu.h>
+
+/*
+ * The VIVT cache of a highmem page is always flushed before the page
+ * is unmapped. Hence unmapped highmem pages need no cache maintenance
+ * in that case.
+ *
+ * However unmapped pages may still be cached with a VIPT cache, and
+ * it is not possible to perform cache maintenance on them using physical
+ * addresses unfortunately.  So we have no choice but to set up a temporary
+ * virtual mapping for that purpose.
+ *
+ * Yet this VIPT cache maintenance may be triggered from DMA support
+ * functions which are possibly called from interrupt context. As we don't
+ * want to keep interrupt disabled all the time when such maintenance is
+ * taking place, we therefore allow for some reentrancy by preserving and
+ * restoring the previous fixmap entry before the interrupted context is
+ * resumed.  If the reentrancy depth is 0 then there is no need to restore
+ * the previous fixmap, and leaving the current one in place allow it to
+ * be reused the next time without a TLB flush (common with DMA).
+ */
+
+static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
+
+void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
+{
+	unsigned int idx, cpu;
+	int *depth;
+	unsigned long vaddr, flags;
+	pte_t pte, *ptep;
+
+	if (!in_interrupt())
+		preempt_disable();
+
+	cpu = smp_processor_id();
+	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+
+	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	ptep = TOP_PTE(vaddr);
+	pte = mk_pte(page, kmap_prot);
+
+	raw_local_irq_save(flags);
+	(*depth)++;
+	if (pte_val(*ptep) == pte_val(pte)) {
+		*saved_pte = pte;
+	} else {
+		*saved_pte = *ptep;
+		set_pte_ext(ptep, pte, 0);
+		local_flush_tlb_kernel_page(vaddr);
+	}
+	raw_local_irq_restore(flags);
+
+	return (void *)vaddr;
+}
+
+void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
+{
+	unsigned int idx, cpu = smp_processor_id();
+	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+	unsigned long vaddr, flags;
+	pte_t pte, *ptep;
+
+	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	ptep = TOP_PTE(vaddr);
+	pte = mk_pte(page, kmap_prot);
+
+	BUG_ON(pte_val(*ptep) != pte_val(pte));
+	BUG_ON(*depth <= 0);
+
+	raw_local_irq_save(flags);
+	(*depth)--;
+	if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
+		set_pte_ext(ptep, saved_pte, 0);
+		local_flush_tlb_kernel_page(vaddr);
+	}
+	raw_local_irq_restore(flags);
+
+	if (!in_interrupt())
+		preempt_enable();
+}
+
+#endif  /* CONFIG_CPU_CACHE_VIPT */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index a04ffbb..f6a9994 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,14 +15,15 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
-#include <linux/sort.h>
 #include <linux/highmem.h>
+#include <linux/gfp.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
 #include <asm/tlb.h>
+#include <asm/fixmap.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,19 +33,21 @@
 static unsigned long phys_initrd_start __initdata = 0;
 static unsigned long phys_initrd_size __initdata = 0;
 
-static void __init early_initrd(char **p)
+static int __init early_initrd(char *p)
 {
 	unsigned long start, size;
+	char *endp;
 
-	start = memparse(*p, p);
-	if (**p == ',') {
-		size = memparse((*p) + 1, p);
+	start = memparse(p, &endp);
+	if (*endp == ',') {
+		size = memparse(endp + 1, NULL);
 
 		phys_initrd_start = start;
 		phys_initrd_size = size;
 	}
+	return 0;
 }
-__early_param("initrd=", early_initrd);
+early_param("initrd", early_initrd);
 
 static int __init parse_tag_initrd(const struct tag *tag)
 {
@@ -82,9 +85,6 @@ void show_mem(void)
 	printk("Mem-info:\n");
 	show_free_areas();
 	for_each_online_node(node) {
-		pg_data_t *n = NODE_DATA(node);
-		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
 		for_each_nodebank (i,mi,node) {
 			struct membank *bank = &mi->bank[i];
 			unsigned int pfn1, pfn2;
@@ -93,8 +93,8 @@ void show_mem(void)
 			pfn1 = bank_pfn_start(bank);
 			pfn2 = bank_pfn_end(bank);
 
-			page = map + pfn1;
-			end  = map + pfn2;
+			page = pfn_to_page(pfn1);
+			end  = pfn_to_page(pfn2 - 1) + 1;
 
 			do {
 				total++;
@@ -223,20 +223,6 @@ static int __init check_initrd(struct meminfo *mi)
 	return initrd_node;
 }
 
-static inline void map_memory_bank(struct membank *bank)
-{
-#ifdef CONFIG_MMU
-	struct map_desc map;
-
-	map.pfn = bank_pfn_start(bank);
-	map.virtual = __phys_to_virt(bank_phys_start(bank));
-	map.length = bank_phys_size(bank);
-	map.type = MT_MEMORY;
-
-	create_mapping(&map);
-#endif
-}
-
 static void __init bootmem_init_node(int node, struct meminfo *mi,
 	unsigned long start_pfn, unsigned long end_pfn)
 {
@@ -246,16 +232,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi,
 	int i;
 
 	/*
-	 * Map the memory banks for this node.
-	 */
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-
-		if (!bank->highmem)
-			map_memory_bank(bank);
-	}
-
-	/*
 	 * Allocate the bootmem bitmap page.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
@@ -384,21 +360,12 @@ static void arm_memory_present(struct meminfo *mi, int node)
 }
 #endif
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
-	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
-
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
@@ -560,7 +527,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
  */
 void __init mem_init(void)
 {
-	unsigned int codesize, datasize, initsize;
+	unsigned long reserved_pages, free_pages;
 	int i, node;
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -596,6 +563,30 @@ void __init mem_init(void)
 	totalram_pages += totalhigh_pages;
 #endif
 
+	reserved_pages = free_pages = 0;
+
+	for_each_online_node(node) {
+		for_each_nodebank(i, &meminfo, node) {
+			struct membank *bank = &meminfo.bank[i];
+			unsigned int pfn1, pfn2;
+			struct page *page, *end;
+
+			pfn1 = bank_pfn_start(bank);
+			pfn2 = bank_pfn_end(bank);
+
+			page = pfn_to_page(pfn1);
+			end  = pfn_to_page(pfn2 - 1) + 1;
+
+			do {
+				if (PageReserved(page))
+					reserved_pages++;
+				else if (!page_count(page))
+					free_pages++;
+				page++;
+			} while (page < end);
+		}
+	}
+
 	/*
 	 * Since our memory may not be contiguous, calculate the
 	 * real number of pages we have in this system
@@ -608,16 +599,71 @@ void __init mem_init(void)
 	}
 	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
 
-	codesize = _etext - _text;
-	datasize = _end - _data;
-	initsize = __init_end - __init_begin;
-
-	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
-		"%dK data, %dK init, %luK highmem)\n",
-		nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
-		datasize >> 10, initsize >> 10,
+	printk(KERN_NOTICE "Memory: %luk/%luk available, %luk reserved, %luK highmem\n",
+		nr_free_pages() << (PAGE_SHIFT-10),
+		free_pages << (PAGE_SHIFT-10),
+		reserved_pages << (PAGE_SHIFT-10),
 		totalhigh_pages << (PAGE_SHIFT-10));
 
+#define MLK(b, t) b, t, ((t) - (b)) >> 10
+#define MLM(b, t) b, t, ((t) - (b)) >> 20
+#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
+
+	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
+			"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_MMU
+			"    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+#endif
+			"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+			"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+#ifdef CONFIG_HIGHMEM
+			"    pkmap   : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+#endif
+			"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
+			"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
+			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n",
+
+			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
+				(PAGE_SIZE)),
+			MLK(FIXADDR_START, FIXADDR_TOP),
+#ifdef CONFIG_MMU
+			MLM(CONSISTENT_BASE, CONSISTENT_END),
+#endif
+			MLM(VMALLOC_START, VMALLOC_END),
+			MLM(PAGE_OFFSET, (unsigned long)high_memory),
+#ifdef CONFIG_HIGHMEM
+			MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) *
+				(PAGE_SIZE)),
+#endif
+			MLM(MODULES_VADDR, MODULES_END),
+
+			MLK_ROUNDUP(__init_begin, __init_end),
+			MLK_ROUNDUP(_text, _etext),
+			MLK_ROUNDUP(_data, _edata));
+
+#undef MLK
+#undef MLM
+#undef MLK_ROUNDUP
+
+	/*
+	 * Check boundaries twice: Some fundamental inconsistencies can
+	 * be detected at build time already.
+	 */
+#ifdef CONFIG_MMU
+	BUILD_BUG_ON(VMALLOC_END			> CONSISTENT_BASE);
+	BUG_ON(VMALLOC_END				> CONSISTENT_BASE);
+
+	BUILD_BUG_ON(TASK_SIZE				> MODULES_VADDR);
+	BUG_ON(TASK_SIZE 				> MODULES_VADDR);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+	BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
+	BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE	> PAGE_OFFSET);
+#endif
+
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
 		extern int sysctl_overcommit_memory;
 		/*
@@ -632,10 +678,10 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 #ifdef CONFIG_HAVE_TCM
-	extern char *__tcm_start, *__tcm_end;
+	extern char __tcm_start, __tcm_end;
 
-	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
-				    __phys_to_pfn(__pa(__tcm_end)),
+	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 0ab75c6..28c8b95 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -139,8 +139,8 @@ void __check_kvm_seq(struct mm_struct *mm)
  * which requires the new ioremap'd region to be referenced, the CPU will
  * reference the _old_ region.
  *
- * Note that get_vm_area() allocates a guard 4K page, so we need to mask
- * the size back to 1MB aligned or we will overflow in the loop below.
+ * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
+ * mask the size back to 1MB aligned or we will overflow in the loop below.
  */
 static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
@@ -254,22 +254,8 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
 }
 #endif
 
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- *
- * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping.  See <asm/pgtable.h> for more information.
- */
-void __iomem *
-__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
-		  unsigned int mtype)
+void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
+	unsigned long offset, size_t size, unsigned int mtype, void *caller)
 {
 	const struct mem_type *type;
 	int err;
@@ -291,7 +277,7 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
 	 */
 	size = PAGE_ALIGN(offset + size);
 
- 	area = get_vm_area(size, VM_IOREMAP);
+	area = get_vm_area_caller(size, VM_IOREMAP, caller);
  	if (!area)
  		return NULL;
  	addr = (unsigned long)area->addr;
@@ -318,10 +304,9 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
 	flush_cache_vmap(addr, addr + size);
 	return (void __iomem *) (offset + addr);
 }
-EXPORT_SYMBOL(__arm_ioremap_pfn);
 
-void __iomem *
-__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+	unsigned int mtype, void *caller)
 {
 	unsigned long last_addr;
  	unsigned long offset = phys_addr & ~PAGE_MASK;
@@ -334,7 +319,33 @@ __arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 	if (!size || last_addr < phys_addr)
 		return NULL;
 
- 	return __arm_ioremap_pfn(pfn, offset, size, mtype);
+	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
+			caller);
+}
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem *
+__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
+		  unsigned int mtype)
+{
+	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
+			__builtin_return_address(0));
+}
+EXPORT_SYMBOL(__arm_ioremap_pfn);
+
+void __iomem *
+__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+	return __arm_ioremap_caller(phys_addr, size, mtype,
+			__builtin_return_address(0));
 }
 EXPORT_SYMBOL(__arm_ioremap);
 
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index a888363..815d08e 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -28,10 +28,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 #endif
 
-struct map_desc;
-struct meminfo;
 struct pglist_data;
 
-void __init create_mapping(struct map_desc *md);
 void __init bootmem_init(void);
 void reserve_node_zero(struct pglist_data *pgdat);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 761ffed..2858941 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -14,6 +14,7 @@
 #include <linux/bootmem.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
+#include <linux/sort.h>
 
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
@@ -100,18 +101,17 @@ static struct cachepolicy cache_policies[] __initdata = {
  * writebuffer to be turned off.  (Note: the write
  * buffer should not be on and the cache off).
  */
-static void __init early_cachepolicy(char **p)
+static int __init early_cachepolicy(char *p)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
 		int len = strlen(cache_policies[i].policy);
 
-		if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+		if (memcmp(p, cache_policies[i].policy, len) == 0) {
 			cachepolicy = i;
 			cr_alignment &= ~cache_policies[i].cr_mask;
 			cr_no_alignment &= ~cache_policies[i].cr_mask;
-			*p += len;
 			break;
 		}
 	}
@@ -130,36 +130,37 @@ static void __init early_cachepolicy(char **p)
 	}
 	flush_cache_all();
 	set_cr(cr_alignment);
+	return 0;
 }
-__early_param("cachepolicy=", early_cachepolicy);
+early_param("cachepolicy", early_cachepolicy);
 
-static void __init early_nocache(char **__unused)
+static int __init early_nocache(char *__unused)
 {
 	char *p = "buffered";
 	printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(&p);
+	early_cachepolicy(p);
+	return 0;
 }
-__early_param("nocache", early_nocache);
+early_param("nocache", early_nocache);
 
-static void __init early_nowrite(char **__unused)
+static int __init early_nowrite(char *__unused)
 {
 	char *p = "uncached";
 	printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(&p);
+	early_cachepolicy(p);
+	return 0;
 }
-__early_param("nowb", early_nowrite);
+early_param("nowb", early_nowrite);
 
-static void __init early_ecc(char **p)
+static int __init early_ecc(char *p)
 {
-	if (memcmp(*p, "on", 2) == 0) {
+	if (memcmp(p, "on", 2) == 0)
 		ecc_mask = PMD_PROTECTION;
-		*p += 2;
-	} else if (memcmp(*p, "off", 3) == 0) {
+	else if (memcmp(p, "off", 3) == 0)
 		ecc_mask = 0;
-		*p += 3;
-	}
+	return 0;
 }
-__early_param("ecc=", early_ecc);
+early_param("ecc", early_ecc);
 
 static int __init noalign_setup(char *__unused)
 {
@@ -420,6 +421,10 @@ static void __init build_mem_type_table(void)
 		user_pgprot |= L_PTE_SHARED;
 		kern_pgprot |= L_PTE_SHARED;
 		vecs_pgprot |= L_PTE_SHARED;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 #endif
@@ -599,7 +604,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
  * offsets, and we take full advantage of sections and
  * supersections.
  */
-void __init create_mapping(struct map_desc *md)
+static void __init create_mapping(struct map_desc *md)
 {
 	unsigned long phys, addr, length, end;
 	const struct mem_type *type;
@@ -670,9 +675,9 @@ static unsigned long __initdata vmalloc_reserve = SZ_128M;
  * bytes. This can be used to increase (or decrease) the vmalloc
  * area - the default is 128m.
  */
-static void __init early_vmalloc(char **arg)
+static int __init early_vmalloc(char *arg)
 {
-	vmalloc_reserve = memparse(*arg, arg);
+	vmalloc_reserve = memparse(arg, NULL);
 
 	if (vmalloc_reserve < SZ_16M) {
 		vmalloc_reserve = SZ_16M;
@@ -687,8 +692,9 @@ static void __init early_vmalloc(char **arg)
 			"vmalloc area is too big, limiting to %luMB\n",
 			vmalloc_reserve >> 20);
 	}
+	return 0;
 }
-__early_param("vmalloc=", early_vmalloc);
+early_param("vmalloc", early_vmalloc);
 
 #define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
 
@@ -864,9 +870,10 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 	if (machine_is_p720t())
 		res_size = 0x00014000;
 
-	/* H1940 and RX3715 need to reserve this for suspend */
+	/* H1940, RX3715 and RX1950 need to reserve this for suspend */
 
-	if (machine_is_h1940() || machine_is_rx3715()) {
+	if (machine_is_h1940() || machine_is_rx3715()
+		|| machine_is_rx1950()) {
 		reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
 				BOOTMEM_DEFAULT);
 		reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
@@ -1012,6 +1019,39 @@ static void __init kmap_init(void)
 #endif
 }
 
+static inline void map_memory_bank(struct membank *bank)
+{
+	struct map_desc map;
+
+	map.pfn = bank_pfn_start(bank);
+	map.virtual = __phys_to_virt(bank_phys_start(bank));
+	map.length = bank_phys_size(bank);
+	map.type = MT_MEMORY;
+
+	create_mapping(&map);
+}
+
+static void __init map_lowmem(void)
+{
+	struct meminfo *mi = &meminfo;
+	int i;
+
+	/* Map all the lowmem memory banks. */
+	for (i = 0; i < mi->nr_banks; i++) {
+		struct membank *bank = &mi->bank[i];
+
+		if (!bank->highmem)
+			map_memory_bank(bank);
+	}
+}
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
@@ -1020,9 +1060,12 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
 	build_mem_type_table();
 	sanity_check_meminfo();
 	prepare_page_table();
+	map_lowmem();
 	bootmem_init();
 	devicemaps_init(mdesc);
 	kmap_init();
@@ -1049,10 +1092,12 @@ void setup_mm_for_reboot(char mode)
 	pgd_t *pgd;
 	int i;
 
-	if (current->mm && current->mm->pgd)
-		pgd = current->mm->pgd;
-	else
-		pgd = init_mm.pgd;
+	/*
+	 * We need to access to user-mode page tables here. For kernel threads
+	 * we don't have any user-mode mappings so we use the context that we
+	 * "borrowed".
+	 */
+	pgd = current->active_mm->pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
 	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 374a831..33b3273 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -65,6 +65,15 @@ void flush_dcache_page(struct page *page)
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC)
+		__cpuc_coherent_user_range(uaddr, uaddr + len);
+}
+
 void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
 				size_t size, unsigned int mtype)
 {
@@ -74,6 +83,12 @@ void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
 }
 EXPORT_SYMBOL(__arm_ioremap_pfn);
 
+void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
+			   size_t size, unsigned int mtype, void *caller)
+{
+	return __arm_ioremap_pfn(pfn, offset, size, mtype);
+}
+
 void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
 			    unsigned int mtype)
 {
@@ -81,6 +96,12 @@ void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
 }
 EXPORT_SYMBOL(__arm_ioremap);
 
+void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+				   unsigned int mtype, void *caller)
+{
+	return __arm_ioremap(phys_addr, size, mtype);
+}
+
 void __iounmap(volatile void __iomem *addr)
 {
 }
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 2690146..be5f58e 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/mm.h>
+#include <linux/gfp.h>
 #include <linux/highmem.h>
 
 #include <asm/pgalloc.h>
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 8012e24..72507c6 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -265,7 +265,7 @@ ENTRY(arm1020_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm1020_dma_inv_range)
+arm1020_dma_inv_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	tst	r0, #CACHE_DLINESIZE - 1
@@ -295,7 +295,7 @@ ENTRY(arm1020_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm1020_dma_clean_range)
+arm1020_dma_clean_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -330,6 +330,30 @@ ENTRY(arm1020_dma_flush_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1020_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm1020_dma_clean_range
+	bcs	arm1020_dma_inv_range
+	b	arm1020_dma_flush_range
+ENDPROC(arm1020_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1020_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm1020_dma_unmap_area)
+
 ENTRY(arm1020_cache_fns)
 	.long	arm1020_flush_kern_cache_all
 	.long	arm1020_flush_user_cache_all
@@ -337,8 +361,8 @@ ENTRY(arm1020_cache_fns)
 	.long	arm1020_coherent_kern_range
 	.long	arm1020_coherent_user_range
 	.long	arm1020_flush_kern_dcache_area
-	.long	arm1020_dma_inv_range
-	.long	arm1020_dma_clean_range
+	.long	arm1020_dma_map_area
+	.long	arm1020_dma_unmap_area
 	.long	arm1020_dma_flush_range
 
 	.align	5
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 41fe25d..d278298 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -258,7 +258,7 @@ ENTRY(arm1020e_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm1020e_dma_inv_range)
+arm1020e_dma_inv_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	tst	r0, #CACHE_DLINESIZE - 1
@@ -284,7 +284,7 @@ ENTRY(arm1020e_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm1020e_dma_clean_range)
+arm1020e_dma_clean_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -316,6 +316,30 @@ ENTRY(arm1020e_dma_flush_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1020e_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm1020e_dma_clean_range
+	bcs	arm1020e_dma_inv_range
+	b	arm1020e_dma_flush_range
+ENDPROC(arm1020e_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1020e_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm1020e_dma_unmap_area)
+
 ENTRY(arm1020e_cache_fns)
 	.long	arm1020e_flush_kern_cache_all
 	.long	arm1020e_flush_user_cache_all
@@ -323,8 +347,8 @@ ENTRY(arm1020e_cache_fns)
 	.long	arm1020e_coherent_kern_range
 	.long	arm1020e_coherent_user_range
 	.long	arm1020e_flush_kern_dcache_area
-	.long	arm1020e_dma_inv_range
-	.long	arm1020e_dma_clean_range
+	.long	arm1020e_dma_map_area
+	.long	arm1020e_dma_unmap_area
 	.long	arm1020e_dma_flush_range
 
 	.align	5
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 20a5b1b..ce13e4a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -247,7 +247,7 @@ ENTRY(arm1022_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm1022_dma_inv_range)
+arm1022_dma_inv_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	tst	r0, #CACHE_DLINESIZE - 1
@@ -273,7 +273,7 @@ ENTRY(arm1022_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm1022_dma_clean_range)
+arm1022_dma_clean_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -305,6 +305,30 @@ ENTRY(arm1022_dma_flush_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1022_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm1022_dma_clean_range
+	bcs	arm1022_dma_inv_range
+	b	arm1022_dma_flush_range
+ENDPROC(arm1022_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1022_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm1022_dma_unmap_area)
+
 ENTRY(arm1022_cache_fns)
 	.long	arm1022_flush_kern_cache_all
 	.long	arm1022_flush_user_cache_all
@@ -312,8 +336,8 @@ ENTRY(arm1022_cache_fns)
 	.long	arm1022_coherent_kern_range
 	.long	arm1022_coherent_user_range
 	.long	arm1022_flush_kern_dcache_area
-	.long	arm1022_dma_inv_range
-	.long	arm1022_dma_clean_range
+	.long	arm1022_dma_map_area
+	.long	arm1022_dma_unmap_area
 	.long	arm1022_dma_flush_range
 
 	.align	5
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 96aedb1..636672a 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -241,7 +241,7 @@ ENTRY(arm1026_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm1026_dma_inv_range)
+arm1026_dma_inv_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	tst	r0, #CACHE_DLINESIZE - 1
@@ -267,7 +267,7 @@ ENTRY(arm1026_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm1026_dma_clean_range)
+arm1026_dma_clean_range:
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CACHE_DLINESIZE - 1
@@ -299,6 +299,30 @@ ENTRY(arm1026_dma_flush_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1026_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm1026_dma_clean_range
+	bcs	arm1026_dma_inv_range
+	b	arm1026_dma_flush_range
+ENDPROC(arm1026_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm1026_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm1026_dma_unmap_area)
+
 ENTRY(arm1026_cache_fns)
 	.long	arm1026_flush_kern_cache_all
 	.long	arm1026_flush_user_cache_all
@@ -306,8 +330,8 @@ ENTRY(arm1026_cache_fns)
 	.long	arm1026_coherent_kern_range
 	.long	arm1026_coherent_user_range
 	.long	arm1026_flush_kern_dcache_area
-	.long	arm1026_dma_inv_range
-	.long	arm1026_dma_clean_range
+	.long	arm1026_dma_map_area
+	.long	arm1026_dma_unmap_area
 	.long	arm1026_dma_flush_range
 
 	.align	5
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d..795dc61 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area)
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r0]			@ read arm instruction
+	ldr	r8, [r2]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 471669e..8be8199 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -239,7 +239,7 @@ ENTRY(arm920_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm920_dma_inv_range)
+arm920_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -262,7 +262,7 @@ ENTRY(arm920_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm920_dma_clean_range)
+arm920_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -288,6 +288,30 @@ ENTRY(arm920_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm920_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm920_dma_clean_range
+	bcs	arm920_dma_inv_range
+	b	arm920_dma_flush_range
+ENDPROC(arm920_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm920_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm920_dma_unmap_area)
+
 ENTRY(arm920_cache_fns)
 	.long	arm920_flush_kern_cache_all
 	.long	arm920_flush_user_cache_all
@@ -295,8 +319,8 @@ ENTRY(arm920_cache_fns)
 	.long	arm920_coherent_kern_range
 	.long	arm920_coherent_user_range
 	.long	arm920_flush_kern_dcache_area
-	.long	arm920_dma_inv_range
-	.long	arm920_dma_clean_range
+	.long	arm920_dma_map_area
+	.long	arm920_dma_unmap_area
 	.long	arm920_dma_flush_range
 
 #endif
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index ee111b0..c0ff8e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -241,7 +241,7 @@ ENTRY(arm922_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm922_dma_inv_range)
+arm922_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -264,7 +264,7 @@ ENTRY(arm922_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm922_dma_clean_range)
+arm922_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -290,6 +290,30 @@ ENTRY(arm922_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm922_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm922_dma_clean_range
+	bcs	arm922_dma_inv_range
+	b	arm922_dma_flush_range
+ENDPROC(arm922_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm922_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm922_dma_unmap_area)
+
 ENTRY(arm922_cache_fns)
 	.long	arm922_flush_kern_cache_all
 	.long	arm922_flush_user_cache_all
@@ -297,8 +321,8 @@ ENTRY(arm922_cache_fns)
 	.long	arm922_coherent_kern_range
 	.long	arm922_coherent_user_range
 	.long	arm922_flush_kern_dcache_area
-	.long	arm922_dma_inv_range
-	.long	arm922_dma_clean_range
+	.long	arm922_dma_map_area
+	.long	arm922_dma_unmap_area
 	.long	arm922_dma_flush_range
 
 #endif
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 8deb5bd..3c6cffe 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -283,7 +283,7 @@ ENTRY(arm925_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm925_dma_inv_range)
+arm925_dma_inv_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -308,7 +308,7 @@ ENTRY(arm925_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm925_dma_clean_range)
+arm925_dma_clean_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -341,6 +341,30 @@ ENTRY(arm925_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm925_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm925_dma_clean_range
+	bcs	arm925_dma_inv_range
+	b	arm925_dma_flush_range
+ENDPROC(arm925_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm925_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm925_dma_unmap_area)
+
 ENTRY(arm925_cache_fns)
 	.long	arm925_flush_kern_cache_all
 	.long	arm925_flush_user_cache_all
@@ -348,8 +372,8 @@ ENTRY(arm925_cache_fns)
 	.long	arm925_coherent_kern_range
 	.long	arm925_coherent_user_range
 	.long	arm925_flush_kern_dcache_area
-	.long	arm925_dma_inv_range
-	.long	arm925_dma_clean_range
+	.long	arm925_dma_map_area
+	.long	arm925_dma_unmap_area
 	.long	arm925_dma_flush_range
 
 ENTRY(cpu_arm925_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 64db6e2..75b707c 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -246,7 +246,7 @@ ENTRY(arm926_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(arm926_dma_inv_range)
+arm926_dma_inv_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -271,7 +271,7 @@ ENTRY(arm926_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(arm926_dma_clean_range)
+arm926_dma_clean_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -304,6 +304,30 @@ ENTRY(arm926_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm926_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm926_dma_clean_range
+	bcs	arm926_dma_inv_range
+	b	arm926_dma_flush_range
+ENDPROC(arm926_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm926_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm926_dma_unmap_area)
+
 ENTRY(arm926_cache_fns)
 	.long	arm926_flush_kern_cache_all
 	.long	arm926_flush_user_cache_all
@@ -311,8 +335,8 @@ ENTRY(arm926_cache_fns)
 	.long	arm926_coherent_kern_range
 	.long	arm926_coherent_user_range
 	.long	arm926_flush_kern_dcache_area
-	.long	arm926_dma_inv_range
-	.long	arm926_dma_clean_range
+	.long	arm926_dma_map_area
+	.long	arm926_dma_unmap_area
 	.long	arm926_dma_flush_range
 
 ENTRY(cpu_arm926_dcache_clean_area)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 8196b9f..1af1657 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -171,7 +171,7 @@ ENTRY(arm940_flush_kern_dcache_area)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm940_dma_inv_range)
+arm940_dma_inv_range:
 	mov	ip, #0
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -192,7 +192,7 @@ ENTRY(arm940_dma_inv_range)
  *	- start	- virtual start address
  *	- end	- virtual end address
  */
-ENTRY(arm940_dma_clean_range)
+arm940_dma_clean_range:
 ENTRY(cpu_arm940_dcache_clean_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
@@ -233,6 +233,30 @@ ENTRY(arm940_dma_flush_range)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm940_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm940_dma_clean_range
+	bcs	arm940_dma_inv_range
+	b	arm940_dma_flush_range
+ENDPROC(arm940_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm940_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm940_dma_unmap_area)
+
 ENTRY(arm940_cache_fns)
 	.long	arm940_flush_kern_cache_all
 	.long	arm940_flush_user_cache_all
@@ -240,8 +264,8 @@ ENTRY(arm940_cache_fns)
 	.long	arm940_coherent_kern_range
 	.long	arm940_coherent_user_range
 	.long	arm940_flush_kern_dcache_area
-	.long	arm940_dma_inv_range
-	.long	arm940_dma_clean_range
+	.long	arm940_dma_map_area
+	.long	arm940_dma_unmap_area
 	.long	arm940_dma_flush_range
 
 	__INIT
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 9a95123..1664b6a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -215,7 +215,7 @@ ENTRY(arm946_flush_kern_dcache_area)
  *	- end	- virtual end address
  * (same as arm926)
  */
-ENTRY(arm946_dma_inv_range)
+arm946_dma_inv_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -240,7 +240,7 @@ ENTRY(arm946_dma_inv_range)
  *
  * (same as arm926)
  */
-ENTRY(arm946_dma_clean_range)
+arm946_dma_clean_range:
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -275,6 +275,30 @@ ENTRY(arm946_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm946_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	arm946_dma_clean_range
+	bcs	arm946_dma_inv_range
+	b	arm946_dma_flush_range
+ENDPROC(arm946_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(arm946_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(arm946_dma_unmap_area)
+
 ENTRY(arm946_cache_fns)
 	.long	arm946_flush_kern_cache_all
 	.long	arm946_flush_user_cache_all
@@ -282,8 +306,8 @@ ENTRY(arm946_cache_fns)
 	.long	arm946_coherent_kern_range
 	.long	arm946_coherent_user_range
 	.long	arm946_flush_kern_dcache_area
-	.long	arm946_dma_inv_range
-	.long	arm946_dma_clean_range
+	.long	arm946_dma_map_area
+	.long	arm946_dma_unmap_area
 	.long	arm946_dma_flush_range
 
 
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index dbc3938..53e6323 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -274,7 +274,7 @@ ENTRY(feroceon_range_flush_kern_dcache_area)
  * (same as v4wb)
  */
 	.align	5
-ENTRY(feroceon_dma_inv_range)
+feroceon_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -288,7 +288,7 @@ ENTRY(feroceon_dma_inv_range)
 	mov	pc, lr
 
 	.align	5
-ENTRY(feroceon_range_dma_inv_range)
+feroceon_range_dma_inv_range:
 	mrs	r2, cpsr
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -314,7 +314,7 @@ ENTRY(feroceon_range_dma_inv_range)
  * (same as v4wb)
  */
 	.align	5
-ENTRY(feroceon_dma_clean_range)
+feroceon_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -324,7 +324,7 @@ ENTRY(feroceon_dma_clean_range)
 	mov	pc, lr
 
 	.align	5
-ENTRY(feroceon_range_dma_clean_range)
+feroceon_range_dma_clean_range:
 	mrs	r2, cpsr
 	cmp	r1, r0
 	subne	r1, r1, #1			@ top address is inclusive
@@ -367,6 +367,44 @@ ENTRY(feroceon_range_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(feroceon_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	feroceon_dma_clean_range
+	bcs	feroceon_dma_inv_range
+	b	feroceon_dma_flush_range
+ENDPROC(feroceon_dma_map_area)
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(feroceon_range_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	feroceon_range_dma_clean_range
+	bcs	feroceon_range_dma_inv_range
+	b	feroceon_range_dma_flush_range
+ENDPROC(feroceon_range_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(feroceon_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(feroceon_dma_unmap_area)
+
 ENTRY(feroceon_cache_fns)
 	.long	feroceon_flush_kern_cache_all
 	.long	feroceon_flush_user_cache_all
@@ -374,8 +412,8 @@ ENTRY(feroceon_cache_fns)
 	.long	feroceon_coherent_kern_range
 	.long	feroceon_coherent_user_range
 	.long	feroceon_flush_kern_dcache_area
-	.long	feroceon_dma_inv_range
-	.long	feroceon_dma_clean_range
+	.long	feroceon_dma_map_area
+	.long	feroceon_dma_unmap_area
 	.long	feroceon_dma_flush_range
 
 ENTRY(feroceon_range_cache_fns)
@@ -385,8 +423,8 @@ ENTRY(feroceon_range_cache_fns)
 	.long	feroceon_coherent_kern_range
 	.long	feroceon_coherent_user_range
 	.long	feroceon_range_flush_kern_dcache_area
-	.long	feroceon_range_dma_inv_range
-	.long	feroceon_range_dma_clean_range
+	.long	feroceon_range_dma_map_area
+	.long	feroceon_dma_unmap_area
 	.long	feroceon_range_dma_flush_range
 
 	.align	5
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 9674d36..caa3115 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -218,7 +218,7 @@ ENTRY(mohawk_flush_kern_dcache_area)
  *
  * (same as v4wb)
  */
-ENTRY(mohawk_dma_inv_range)
+mohawk_dma_inv_range:
 	tst	r0, #CACHE_DLINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
 	tst	r1, #CACHE_DLINESIZE - 1
@@ -241,7 +241,7 @@ ENTRY(mohawk_dma_inv_range)
  *
  * (same as v4wb)
  */
-ENTRY(mohawk_dma_clean_range)
+mohawk_dma_clean_range:
 	bic	r0, r0, #CACHE_DLINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHE_DLINESIZE
@@ -268,6 +268,30 @@ ENTRY(mohawk_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(mohawk_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	mohawk_dma_clean_range
+	bcs	mohawk_dma_inv_range
+	b	mohawk_dma_flush_range
+ENDPROC(mohawk_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(mohawk_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(mohawk_dma_unmap_area)
+
 ENTRY(mohawk_cache_fns)
 	.long	mohawk_flush_kern_cache_all
 	.long	mohawk_flush_user_cache_all
@@ -275,8 +299,8 @@ ENTRY(mohawk_cache_fns)
 	.long	mohawk_coherent_kern_range
 	.long	mohawk_coherent_user_range
 	.long	mohawk_flush_kern_dcache_area
-	.long	mohawk_dma_inv_range
-	.long	mohawk_dma_clean_range
+	.long	mohawk_dma_map_area
+	.long	mohawk_dma_unmap_area
 	.long	mohawk_dma_flush_range
 
 ENTRY(cpu_mohawk_dcache_clean_area)
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index ee77002..5c47760 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init)
 	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
 	mov	pc, lr
 
-	.previous
+	.section .text
 
 /*
  * cpu_sa1100_proc_fin()
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 8e4f6dc..e5797f1 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -257,7 +257,7 @@ ENTRY(xsc3_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xsc3_dma_inv_range)
+xsc3_dma_inv_range:
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
@@ -278,7 +278,7 @@ ENTRY(xsc3_dma_inv_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xsc3_dma_clean_range)
+xsc3_dma_clean_range:
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
@@ -304,6 +304,30 @@ ENTRY(xsc3_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(xsc3_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	xsc3_dma_clean_range
+	bcs	xsc3_dma_inv_range
+	b	xsc3_dma_flush_range
+ENDPROC(xsc3_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(xsc3_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(xsc3_dma_unmap_area)
+
 ENTRY(xsc3_cache_fns)
 	.long	xsc3_flush_kern_cache_all
 	.long	xsc3_flush_user_cache_all
@@ -311,8 +335,8 @@ ENTRY(xsc3_cache_fns)
 	.long	xsc3_coherent_kern_range
 	.long	xsc3_coherent_user_range
 	.long	xsc3_flush_kern_dcache_area
-	.long	xsc3_dma_inv_range
-	.long	xsc3_dma_clean_range
+	.long	xsc3_dma_map_area
+	.long	xsc3_dma_unmap_area
 	.long	xsc3_dma_flush_range
 
 ENTRY(cpu_xsc3_dcache_clean_area)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 93df472..63037e2 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -315,7 +315,7 @@ ENTRY(xscale_flush_kern_dcache_area)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xscale_dma_inv_range)
+xscale_dma_inv_range:
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
@@ -336,7 +336,7 @@ ENTRY(xscale_dma_inv_range)
  *	- start  - virtual start address
  *	- end	 - virtual end address
  */
-ENTRY(xscale_dma_clean_range)
+xscale_dma_clean_range:
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	add	r0, r0, #CACHELINESIZE
@@ -363,6 +363,43 @@ ENTRY(xscale_dma_flush_range)
 	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
 	mov	pc, lr
 
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(xscale_dma_map_area)
+	add	r1, r1, r0
+	cmp	r2, #DMA_TO_DEVICE
+	beq	xscale_dma_clean_range
+	bcs	xscale_dma_inv_range
+	b	xscale_dma_flush_range
+ENDPROC(xscale_dma_map_area)
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(xscale_dma_a0_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	beq	xscale_dma_clean_range
+	b	xscale_dma_flush_range
+ENDPROC(xscsale_dma_a0_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(xscale_dma_unmap_area)
+	mov	pc, lr
+ENDPROC(xscale_dma_unmap_area)
+
 ENTRY(xscale_cache_fns)
 	.long	xscale_flush_kern_cache_all
 	.long	xscale_flush_user_cache_all
@@ -370,8 +407,8 @@ ENTRY(xscale_cache_fns)
 	.long	xscale_coherent_kern_range
 	.long	xscale_coherent_user_range
 	.long	xscale_flush_kern_dcache_area
-	.long	xscale_dma_inv_range
-	.long	xscale_dma_clean_range
+	.long	xscale_dma_map_area
+	.long	xscale_dma_unmap_area
 	.long	xscale_dma_flush_range
 
 /*
@@ -394,8 +431,8 @@ ENTRY(xscale_80200_A0_A1_cache_fns)
 	.long	xscale_coherent_kern_range
 	.long	xscale_coherent_user_range
 	.long	xscale_flush_kern_dcache_area
-	.long	xscale_dma_flush_range
-	.long	xscale_dma_clean_range
+	.long	xscale_dma_a0_map_area
+	.long	xscale_dma_unmap_area
 	.long	xscale_dma_flush_range
 
 ENTRY(cpu_xscale_dcache_clean_area)
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index 0cb1848..f3f288a 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -50,7 +50,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	mov	ip, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, ip, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
+#else
 	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
+#endif
 	dsb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -79,7 +83,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r2, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r2, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
+#else
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
+#endif
 	dsb
 	isb
 	mov	pc, lr
diff --git a/arch/arm/nwfpe/ChangeLog b/arch/arm/nwfpe/ChangeLog
index eeb5a7c..fa8028b 100644
--- a/arch/arm/nwfpe/ChangeLog
+++ b/arch/arm/nwfpe/ChangeLog
@@ -72,7 +72,7 @@
 1998-11-23  Scott Bambrough  <scottb@netwinder.org>
 
 	* README.FPE - fix typo in description of lfm/sfm instructions
-	* NOTES - Added file to describe known bugs/problems 
+	* NOTES - Added file to describe known bugs/problems
 	* fpmodule.c - Changed version number to 0.94
 
 1998-11-20  Scott Bambrough  <scottb@netwinder.org>
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index 48bca0d..cafa183 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -111,12 +111,12 @@ next:
 	@ to fault.  Emit the appropriate exception gunk to fix things up.
 	@ ??? For some reason, faults can happen at .Lx2 even with a
 	@ plain LDR instruction.  Weird, but it seems harmless.
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	2
 .Lfix:	mov	pc, r9			@ let the user eat segfaults
-	.previous
+	.popsection
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	.Lx1, .Lfix
-	.previous
+	.popsection
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index 4c0ab50..cb7658e 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -24,6 +24,7 @@
 #include "fpa11.h"
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 
 /* XXX */
 #include <linux/errno.h>
@@ -134,13 +135,17 @@ a SIGFPE exception if necessary.  If not the relevant bits in the
 cumulative exceptions flag byte are set and we return.
 */
 
+#ifdef CONFIG_DEBUG_USER
+/* By default, ignore inexact errors as there are far too many of them to log */
+static int debug = ~BIT_IXC;
+#endif
+
 void float_raise(signed char flags)
 {
 	register unsigned int fpsr, cumulativeTraps;
 
 #ifdef CONFIG_DEBUG_USER
- 	/* Ignore inexact errors as there are far too many of them to log */
- 	if (flags & ~BIT_IXC)
+	if (flags & debug)
  		printk(KERN_DEBUG
 		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
 		       current->comm, current->pid, flags,
@@ -179,3 +184,7 @@ module_exit(fpe_exit);
 MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>");
 MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)");
 MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_DEBUG_USER
+module_param(debug, int, 0644);
+#endif
diff --git a/arch/arm/nwfpe/fpsr.h b/arch/arm/nwfpe/fpsr.h
index 859b300..bd425dc 100644
--- a/arch/arm/nwfpe/fpsr.h
+++ b/arch/arm/nwfpe/fpsr.h
@@ -30,7 +30,7 @@ one byte.
 	EXCEPTION TRAP ENABLE BYTE
 	SYSTEM CONTROL BYTE
 	CUMULATIVE EXCEPTION FLAGS BYTE
-	
+
 The FPCR is a 32 bit register consisting of bit flags.
 */
 
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 88e31f5..e666eaf 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,9 +6,4 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
-oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
-oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
-oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
-oprofile-$(CONFIG_OPROFILE_ARMV7)	+= op_model_v7.o
+oprofile-y				:= $(DRIVER_OBJS) common.o
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
deleted file mode 100644
index d805a52..0000000
--- a/arch/arm/oprofile/backtrace.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Arm specific backtracing code for oprofile
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * Based on i386 oprofile backtrace code by John Levon, David Smith
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-static int report_trace(struct stackframe *frame, void *d)
-{
-	unsigned int *depth = d;
-
-	if (*depth) {
-		oprofile_add_trace(frame->pc);
-		(*depth)--;
-	}
-
-	return *depth == 0;
-}
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- */
-struct frame_tail {
-	struct frame_tail *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-static struct frame_tail* user_backtrace(struct frame_tail *tail)
-{
-	struct frame_tail buftail[2];
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
-		return NULL;
-	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
-		return NULL;
-
-	oprofile_add_trace(buftail[0].lr);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (tail >= buftail[0].fp)
-		return NULL;
-
-	return buftail[0].fp-1;
-}
-
-void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
-
-	if (!user_mode(regs)) {
-		struct stackframe frame;
-		frame.fp = regs->ARM_fp;
-		frame.sp = regs->ARM_sp;
-		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
-		walk_stackframe(&frame, report_trace, &depth);
-		return;
-	}
-
-	while (depth-- && tail && !((unsigned long) tail & 3))
-		tail = user_backtrace(tail);
-}
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 3fcd752..0691176 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -2,32 +2,184 @@
  * @file common.c
  *
  * @remark Copyright 2004 Oprofile Authors
+ * @remark Copyright 2010 ARM Ltd.
  * @remark Read the file COPYING
  *
  * @author Zwane Mwaikambo
+ * @author Will Deacon [move to perf]
  */
 
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <linux/oprofile.h>
-#include <linux/errno.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/sysdev.h>
-#include <linux/mutex.h>
+#include <asm/stacktrace.h>
+#include <linux/uaccess.h>
 
-#include "op_counter.h"
-#include "op_arm_model.h"
+#include <asm/perf_event.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_HW_PERF_EVENTS
+/*
+ * Per performance monitor configuration as set via oprofilefs.
+ */
+struct op_counter_config {
+	unsigned long count;
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long unit_mask;
+	unsigned long kernel;
+	unsigned long user;
+	struct perf_event_attr attr;
+};
 
-static struct op_arm_model_spec *op_arm_model;
 static int op_arm_enabled;
 static DEFINE_MUTEX(op_arm_mutex);
 
-struct op_counter_config *counter_config;
+static struct op_counter_config *counter_config;
+static struct perf_event **perf_events[nr_cpumask_bits];
+static int perf_num_counters;
+
+/*
+ * Overflow callback for oprofile.
+ */
+static void op_overflow_handler(struct perf_event *event, int unused,
+			struct perf_sample_data *data, struct pt_regs *regs)
+{
+	int id;
+	u32 cpu = smp_processor_id();
+
+	for (id = 0; id < perf_num_counters; ++id)
+		if (perf_events[cpu][id] == event)
+			break;
+
+	if (id != perf_num_counters)
+		oprofile_add_sample(regs, id);
+	else
+		pr_warning("oprofile: ignoring spurious overflow "
+				"on cpu %u\n", cpu);
+}
+
+/*
+ * Called by op_arm_setup to create perf attributes to mirror the oprofile
+ * settings in counter_config. Attributes are created as `pinned' events and
+ * so are permanently scheduled on the PMU.
+ */
+static void op_perf_setup(void)
+{
+	int i;
+	u32 size = sizeof(struct perf_event_attr);
+	struct perf_event_attr *attr;
+
+	for (i = 0; i < perf_num_counters; ++i) {
+		attr = &counter_config[i].attr;
+		memset(attr, 0, size);
+		attr->type		= PERF_TYPE_RAW;
+		attr->size		= size;
+		attr->config		= counter_config[i].event;
+		attr->sample_period	= counter_config[i].count;
+		attr->pinned		= 1;
+	}
+}
+
+static int op_create_counter(int cpu, int event)
+{
+	int ret = 0;
+	struct perf_event *pevent;
+
+	if (!counter_config[event].enabled || (perf_events[cpu][event] != NULL))
+		return ret;
+
+	pevent = perf_event_create_kernel_counter(&counter_config[event].attr,
+						  cpu, -1,
+						  op_overflow_handler);
+
+	if (IS_ERR(pevent)) {
+		ret = PTR_ERR(pevent);
+	} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+		pr_warning("oprofile: failed to enable event %d "
+				"on CPU %d\n", event, cpu);
+		ret = -EBUSY;
+	} else {
+		perf_events[cpu][event] = pevent;
+	}
+
+	return ret;
+}
+
+static void op_destroy_counter(int cpu, int event)
+{
+	struct perf_event *pevent = perf_events[cpu][event];
+
+	if (pevent) {
+		perf_event_release_kernel(pevent);
+		perf_events[cpu][event] = NULL;
+	}
+}
+
+/*
+ * Called by op_arm_start to create active perf events based on the
+ * perviously configured attributes.
+ */
+static int op_perf_start(void)
+{
+	int cpu, event, ret = 0;
+
+	for_each_online_cpu(cpu) {
+		for (event = 0; event < perf_num_counters; ++event) {
+			ret = op_create_counter(cpu, event);
+			if (ret)
+				goto out;
+		}
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * Called by op_arm_stop at the end of a profiling run.
+ */
+static void op_perf_stop(void)
+{
+	int cpu, event;
+
+	for_each_online_cpu(cpu)
+		for (event = 0; event < perf_num_counters; ++event)
+			op_destroy_counter(cpu, event);
+}
+
+
+static char *op_name_from_perf_id(enum arm_perf_pmu_ids id)
+{
+	switch (id) {
+	case ARM_PERF_PMU_ID_XSCALE1:
+		return "arm/xscale1";
+	case ARM_PERF_PMU_ID_XSCALE2:
+		return "arm/xscale2";
+	case ARM_PERF_PMU_ID_V6:
+		return "arm/armv6";
+	case ARM_PERF_PMU_ID_V6MP:
+		return "arm/mpcore";
+	case ARM_PERF_PMU_ID_CA8:
+		return "arm/armv7";
+	case ARM_PERF_PMU_ID_CA9:
+		return "arm/armv7-ca9";
+	default:
+		return NULL;
+	}
+}
 
 static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < op_arm_model->num_counters; i++) {
+	for (i = 0; i < perf_num_counters; i++) {
 		struct dentry *dir;
 		char buf[4];
 
@@ -46,12 +198,10 @@ static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 
 static int op_arm_setup(void)
 {
-	int ret;
-
 	spin_lock(&oprofilefs_lock);
-	ret = op_arm_model->setup_ctrs();
+	op_perf_setup();
 	spin_unlock(&oprofilefs_lock);
-	return ret;
+	return 0;
 }
 
 static int op_arm_start(void)
@@ -60,8 +210,9 @@ static int op_arm_start(void)
 
 	mutex_lock(&op_arm_mutex);
 	if (!op_arm_enabled) {
-		ret = op_arm_model->start();
-		op_arm_enabled = !ret;
+		ret = 0;
+		op_perf_start();
+		op_arm_enabled = 1;
 	}
 	mutex_unlock(&op_arm_mutex);
 	return ret;
@@ -71,113 +222,205 @@ static void op_arm_stop(void)
 {
 	mutex_lock(&op_arm_mutex);
 	if (op_arm_enabled)
-		op_arm_model->stop();
+		op_perf_stop();
 	op_arm_enabled = 0;
 	mutex_unlock(&op_arm_mutex);
 }
 
 #ifdef CONFIG_PM
-static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
+static int op_arm_suspend(struct platform_device *dev, pm_message_t state)
 {
 	mutex_lock(&op_arm_mutex);
 	if (op_arm_enabled)
-		op_arm_model->stop();
+		op_perf_stop();
 	mutex_unlock(&op_arm_mutex);
 	return 0;
 }
 
-static int op_arm_resume(struct sys_device *dev)
+static int op_arm_resume(struct platform_device *dev)
 {
 	mutex_lock(&op_arm_mutex);
-	if (op_arm_enabled && op_arm_model->start())
+	if (op_arm_enabled && op_perf_start())
 		op_arm_enabled = 0;
 	mutex_unlock(&op_arm_mutex);
 	return 0;
 }
 
-static struct sysdev_class oprofile_sysclass = {
-	.name		= "oprofile",
+static struct platform_driver oprofile_driver = {
+	.driver		= {
+		.name		= "arm-oprofile",
+	},
 	.resume		= op_arm_resume,
 	.suspend	= op_arm_suspend,
 };
 
-static struct sys_device device_oprofile = {
-	.id		= 0,
-	.cls		= &oprofile_sysclass,
-};
+static struct platform_device *oprofile_pdev;
 
 static int __init init_driverfs(void)
 {
 	int ret;
 
-	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
-		ret = sysdev_register(&device_oprofile);
+	ret = platform_driver_register(&oprofile_driver);
+	if (ret)
+		goto out;
 
+	oprofile_pdev =	platform_device_register_simple(
+				oprofile_driver.driver.name, 0, NULL, 0);
+	if (IS_ERR(oprofile_pdev)) {
+		ret = PTR_ERR(oprofile_pdev);
+		platform_driver_unregister(&oprofile_driver);
+	}
+
+out:
 	return ret;
 }
 
 static void  exit_driverfs(void)
 {
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
+	platform_device_unregister(oprofile_pdev);
+	platform_driver_unregister(&oprofile_driver);
 }
 #else
-#define init_driverfs()	do { } while (0)
+static int __init init_driverfs(void) { return 0; }
 #define exit_driverfs() do { } while (0)
 #endif /* CONFIG_PM */
 
-int __init oprofile_arch_init(struct oprofile_operations *ops)
+static int report_trace(struct stackframe *frame, void *d)
 {
-	struct op_arm_model_spec *spec = NULL;
-	int ret = -ENODEV;
+	unsigned int *depth = d;
 
-	ops->backtrace = arm_backtrace;
+	if (*depth) {
+		oprofile_add_trace(frame->pc);
+		(*depth)--;
+	}
 
-#ifdef CONFIG_CPU_XSCALE
-	spec = &op_xscale_spec;
-#endif
+	return *depth == 0;
+}
 
-#ifdef CONFIG_OPROFILE_ARMV6
-	spec = &op_armv6_spec;
-#endif
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ */
+struct frame_tail {
+	struct frame_tail *fp;
+	unsigned long sp;
+	unsigned long lr;
+} __attribute__((packed));
 
-#ifdef CONFIG_OPROFILE_MPCORE
-	spec = &op_mpcore_spec;
-#endif
+static struct frame_tail* user_backtrace(struct frame_tail *tail)
+{
+	struct frame_tail buftail[2];
 
-#ifdef CONFIG_OPROFILE_ARMV7
-	spec = &op_armv7_spec;
-#endif
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
+		return NULL;
 
-	if (spec) {
-		ret = spec->init();
-		if (ret < 0)
-			return ret;
+	oprofile_add_trace(buftail[0].lr);
 
-		counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
-					 GFP_KERNEL);
-		if (!counter_config)
-			return -ENOMEM;
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= buftail[0].fp)
+		return NULL;
 
-		op_arm_model = spec;
-		init_driverfs();
-		ops->create_files = op_arm_create_files;
-		ops->setup = op_arm_setup;
-		ops->shutdown = op_arm_stop;
-		ops->start = op_arm_start;
-		ops->stop = op_arm_stop;
-		ops->cpu_type = op_arm_model->name;
-		printk(KERN_INFO "oprofile: using %s\n", spec->name);
+	return buftail[0].fp-1;
+}
+
+static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
+
+	if (!user_mode(regs)) {
+		struct stackframe frame;
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+		walk_stackframe(&frame, report_trace, &depth);
+		return;
 	}
 
+	while (depth-- && tail && !((unsigned long) tail & 3))
+		tail = user_backtrace(tail);
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	int cpu, ret = 0;
+
+	perf_num_counters = armpmu_get_max_events();
+
+	counter_config = kcalloc(perf_num_counters,
+			sizeof(struct op_counter_config), GFP_KERNEL);
+
+	if (!counter_config) {
+		pr_info("oprofile: failed to allocate %d "
+				"counters\n", perf_num_counters);
+		return -ENOMEM;
+	}
+
+	ret = init_driverfs();
+	if (ret) {
+		kfree(counter_config);
+		return ret;
+	}
+
+	for_each_possible_cpu(cpu) {
+		perf_events[cpu] = kcalloc(perf_num_counters,
+				sizeof(struct perf_event *), GFP_KERNEL);
+		if (!perf_events[cpu]) {
+			pr_info("oprofile: failed to allocate %d perf events "
+					"for cpu %d\n", perf_num_counters, cpu);
+			while (--cpu >= 0)
+				kfree(perf_events[cpu]);
+			return -ENOMEM;
+		}
+	}
+
+	ops->backtrace		= arm_backtrace;
+	ops->create_files	= op_arm_create_files;
+	ops->setup		= op_arm_setup;
+	ops->start		= op_arm_start;
+	ops->stop		= op_arm_stop;
+	ops->shutdown		= op_arm_stop;
+	ops->cpu_type		= op_name_from_perf_id(armpmu_get_pmu_id());
+
+	if (!ops->cpu_type)
+		ret = -ENODEV;
+	else
+		pr_info("oprofile: using %s\n", ops->cpu_type);
+
 	return ret;
 }
 
 void oprofile_arch_exit(void)
 {
-	if (op_arm_model) {
+	int cpu, id;
+	struct perf_event *event;
+
+	if (*perf_events) {
 		exit_driverfs();
-		op_arm_model = NULL;
+		for_each_possible_cpu(cpu) {
+			for (id = 0; id < perf_num_counters; ++id) {
+				event = perf_events[cpu][id];
+				if (event != NULL)
+					perf_event_release_kernel(event);
+			}
+			kfree(perf_events[cpu]);
+		}
 	}
-	kfree(counter_config);
+
+	if (counter_config)
+		kfree(counter_config);
+}
+#else
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	pr_info("oprofile: hardware counters not available\n");
+	return -ENODEV;
 }
+void oprofile_arch_exit(void) {}
+#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
deleted file mode 100644
index 8c4e4f6..0000000
--- a/arch/arm/oprofile/op_arm_model.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/**
- * @file op_arm_model.h
- * interface to ARM machine specific operations
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#ifndef OP_ARM_MODEL_H
-#define OP_ARM_MODEL_H
-
-struct op_arm_model_spec {
-	int (*init)(void);
-	unsigned int num_counters;
-	int (*setup_ctrs)(void);
-	int (*start)(void);
-	void (*stop)(void);
-	char *name;
-};
-
-#ifdef CONFIG_CPU_XSCALE
-extern struct op_arm_model_spec op_xscale_spec;
-#endif
-
-extern struct op_arm_model_spec op_armv6_spec;
-extern struct op_arm_model_spec op_mpcore_spec;
-extern struct op_arm_model_spec op_armv7_spec;
-
-extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void op_arm_exit(void);
-#endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h
deleted file mode 100644
index ca942a6..0000000
--- a/arch/arm/oprofile/op_counter.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/**
- * @file op_counter.h
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#ifndef OP_COUNTER_H
-#define OP_COUNTER_H
-
-/* Per performance monitor configuration as set via
- * oprofilefs.
- */
-struct op_counter_config {
-	unsigned long count;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long unit_mask;
-	unsigned long kernel;
-	unsigned long user;
-};
-
-extern struct op_counter_config *counter_config;
-
-#endif /* OP_COUNTER_H */
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
deleted file mode 100644
index ad80752..0000000
--- a/arch/arm/oprofile/op_model_arm11_core.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/**
- * @file op_model_arm11_core.c
- * ARM11 Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-
-/*
- * ARM11 PMU support
- */
-static inline void arm11_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0x0ffff77f;
-	asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
-}
-
-static inline u32 arm11_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
-	return val;
-}
-
-static void arm11_reset_counter(unsigned int cnt)
-{
-	u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
-	switch (cnt) {
-	case CCNT:
-		asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
-		break;
-
-	case PMN0:
-		asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
-		break;
-
-	case PMN1:
-		asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
-		break;
-	}
-}
-
-int arm11_setup_pmu(void)
-{
-	unsigned int cnt;
-	u32 pmnc;
-
-	if (arm11_read_pmnc() & PMCR_E) {
-		printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
-		return -EBUSY;
-	}
-
-	/* initialize PMNC, reset overflow, D bit, C bit and P bit. */
-	arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
-			 PMCR_C | PMCR_P);
-
-	for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
-		unsigned long event;
-
-		if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
-			continue;
-
-		event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
-
-		/*
-		 * Set event (if destined for PMNx counters)
-		 */
-		if (cnt == PMN0) {
-			pmnc |= event << 20;
-		} else if (cnt == PMN1) {
-			pmnc |= event << 12;
-		}
-
-		/*
-		 * We don't need to set the event if it's a cycle count
-		 * Enable interrupt for this counter
-		 */
-		pmnc |= PMCR_IEN_PMN0 << cnt;
-		arm11_reset_counter(cnt);
-	}
-	arm11_write_pmnc(pmnc);
-
-	return 0;
-}
-
-int arm11_start_pmu(void)
-{
-	arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
-	return 0;
-}
-
-int arm11_stop_pmu(void)
-{
-	unsigned int cnt;
-
-	arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
-
-	for (cnt = PMN0; cnt <= CCNT; cnt++)
-		arm11_reset_counter(cnt);
-
-	return 0;
-}
-
-/*
- * CPU counters' IRQ handler (one IRQ per CPU)
- */
-static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned int cnt;
-	u32 pmnc;
-
-	pmnc = arm11_read_pmnc();
-
-	for (cnt = PMN0; cnt <= CCNT; cnt++) {
-		if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
-			arm11_reset_counter(cnt);
-			oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
-		}
-	}
-	/* Clear counter flag(s) */
-	arm11_write_pmnc(pmnc);
-	return IRQ_HANDLED;
-}
-
-int arm11_request_interrupts(int *irqs, int nr)
-{
-	unsigned int i;
-	int ret = 0;
-
-	for(i = 0; i < nr; i++) {
-		ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
-		if (ret != 0) {
-			printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
-			       irqs[i]);
-			break;
-		}
-	}
-
-	if (i != nr)
-		while (i-- != 0)
-			free_irq(irqs[i], NULL);
-
-	return ret;
-}
-
-void arm11_release_interrupts(int *irqs, int nr)
-{
-	unsigned int i;
-
-	for (i = 0; i < nr; i++)
-		free_irq(irqs[i], NULL);
-}
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
deleted file mode 100644
index 6f8538e..0000000
--- a/arch/arm/oprofile/op_model_arm11_core.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/**
- * @file op_model_arm11_core.h
- * ARM11 Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-#ifndef OP_MODEL_ARM11_CORE_H
-#define OP_MODEL_ARM11_CORE_H
-
-/*
- * Per-CPU PMCR
- */
-#define PMCR_E		(1 << 0)	/* Enable */
-#define PMCR_P		(1 << 1)	/* Count reset */
-#define PMCR_C		(1 << 2)	/* Cycle counter reset */
-#define PMCR_D		(1 << 3)	/* Cycle counter counts every 64th cpu cycle */
-#define PMCR_IEN_PMN0	(1 << 4)	/* Interrupt enable count reg 0 */
-#define PMCR_IEN_PMN1	(1 << 5)	/* Interrupt enable count reg 1 */
-#define PMCR_IEN_CCNT	(1 << 6)	/* Interrupt enable cycle counter */
-#define PMCR_OFL_PMN0	(1 << 8)	/* Count reg 0 overflow */
-#define PMCR_OFL_PMN1	(1 << 9)	/* Count reg 1 overflow */
-#define PMCR_OFL_CCNT	(1 << 10)	/* Cycle counter overflow */
-
-#define PMN0 0
-#define PMN1 1
-#define CCNT 2
-
-#define CPU_COUNTER(cpu, counter)	((cpu) * 3 + (counter))
-
-int arm11_setup_pmu(void);
-int arm11_start_pmu(void);
-int arm11_stop_pmu(void);
-int arm11_request_interrupts(int *, int);
-void arm11_release_interrupts(int *, int);
-
-#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
deleted file mode 100644
index 4ce0f98..0000000
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/**
- * @file op_model_mpcore.c
- * MPCORE Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- *
- *  Counters:
- *    0: PMN0 on CPU0, per-cpu configurable event counter
- *    1: PMN1 on CPU0, per-cpu configurable event counter
- *    2: CCNT on CPU0
- *    3: PMN0 on CPU1
- *    4: PMN1 on CPU1
- *    5: CCNT on CPU1
- *    6: PMN0 on CPU1
- *    7: PMN1 on CPU1
- *    8: CCNT on CPU1
- *    9: PMN0 on CPU1
- *   10: PMN1 on CPU1
- *   11: CCNT on CPU1
- *   12-19: configurable SCU event counters
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/board-eb.h>
-#include <asm/system.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-#include "op_model_mpcore.h"
-
-/*
- * MPCore SCU event monitor support
- */
-#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_EB11MP_SCU_BASE + 0x10)
-
-/*
- * Bitmask of used SCU counters
- */
-static unsigned int scu_em_used;
-
-/*
- * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
- */
-static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
-{
-	writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
-}
-
-static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
-{
-	event &= 0xff;
-	writeb(event, &emc->MCEB[n]);
-}
-
-/*
- * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
- */
-static irqreturn_t scu_em_interrupt(int irq, void *arg)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int cnt;
-
-	cnt = irq - IRQ_EB11MP_PMU_SCU0;
-	oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
-	scu_reset_counter(emc, cnt);
-
-	/* Clear overflow flag for this counter */
-	writel(1 << (cnt + 16), &emc->PMCR);
-
-	return IRQ_HANDLED;
-}
-
-/* Configure just the SCU counters that the user has requested */
-static void scu_setup(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int i;
-
-	scu_em_used = 0;
-
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (counter_config[SCU_COUNTER(i)].enabled &&
-		    counter_config[SCU_COUNTER(i)].event) {
-			scu_set_event(emc, i, 0); /* disable counter for now */
-			scu_em_used |= 1 << i;
-		}
-	}
-}
-
-static int scu_start(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int temp, i;
-	unsigned long event;
-	int ret = 0;
-
-	/*
-	 * request the SCU counter interrupts that we need
-	 */
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			ret = request_irq(IRQ_EB11MP_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
-			if (ret) {
-				printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
-				       IRQ_EB11MP_PMU_SCU0 + i);
-				goto err_free_scu;
-			}
-		}
-	}
-
-	/*
-	 * clear overflow and enable interrupt for all used counters
-	 */
-	temp = readl(&emc->PMCR);
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			scu_reset_counter(emc, i);
-			event = counter_config[SCU_COUNTER(i)].event;
-			scu_set_event(emc, i, event);
-
-			/* clear overflow/interrupt */
-			temp |= 1 << (i + 16);
-			/* enable interrupt*/
-			temp |= 1 << (i + 8);
-		}
-	}
-
-	/* Enable all 8 counters */
-	temp |= PMCR_E;
-	writel(temp, &emc->PMCR);
-
-	return 0;
-
- err_free_scu:
-	while (i--)
-		free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
-	return ret;
-}
-
-static void scu_stop(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int temp, i;
-
-	/* Disable counter interrupts */
-	/* Don't disable all 8 counters (with the E bit) as they may be in use */
-	temp = readl(&emc->PMCR);
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i))
-			temp &= ~(1 << (i + 8));
-	}
-	writel(temp, &emc->PMCR);
-
-	/* Free counter interrupts and reset counters */
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			scu_reset_counter(emc, i);
-			free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
-		}
-	}
-}
-
-struct em_function_data {
-	int (*fn)(void);
-	int ret;
-};
-
-static void em_func(void *data)
-{
-	struct em_function_data *d = data;
-	int ret = d->fn();
-	if (ret)
-		d->ret = ret;
-}
-
-static int em_call_function(int (*fn)(void))
-{
-	struct em_function_data data;
-
-	data.fn = fn;
-	data.ret = 0;
-
-	preempt_disable();
-	smp_call_function(em_func, &data, 1);
-	em_func(&data);
-	preempt_enable();
-
-	return data.ret;
-}
-
-/*
- * Glue to stick the individual ARM11 PMUs and the SCU
- * into the oprofile framework.
- */
-static int em_setup_ctrs(void)
-{
-	int ret;
-
-	/* Configure CPU counters by cross-calling to the other CPUs */
-	ret = em_call_function(arm11_setup_pmu);
-	if (ret == 0)
-		scu_setup();
-
-	return 0;
-}
-
-static int arm11_irqs[] = {
-	[0]	= IRQ_EB11MP_PMU_CPU0,
-	[1]	= IRQ_EB11MP_PMU_CPU1,
-	[2]	= IRQ_EB11MP_PMU_CPU2,
-	[3]	= IRQ_EB11MP_PMU_CPU3
-};
-
-static int em_start(void)
-{
-	int ret;
-
-	ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
-	if (ret == 0) {
-		em_call_function(arm11_start_pmu);
-
-		ret = scu_start();
-		if (ret)
-			arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
-	}
-	return ret;
-}
-
-static void em_stop(void)
-{
-	em_call_function(arm11_stop_pmu);
-	arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
-	scu_stop();
-}
-
-/*
- * Why isn't there a function to route an IRQ to a specific CPU in
- * genirq?
- */
-static void em_route_irq(int irq, unsigned int cpu)
-{
-	struct irq_desc *desc = irq_desc + irq;
-	const struct cpumask *mask = cpumask_of(cpu);
-
-	spin_lock_irq(&desc->lock);
-	cpumask_copy(desc->affinity, mask);
-	desc->chip->set_affinity(irq, mask);
-	spin_unlock_irq(&desc->lock);
-}
-
-static int em_setup(void)
-{
-	/*
-	 * Send SCU PMU interrupts to the "owner" CPU.
-	 */
-	em_route_irq(IRQ_EB11MP_PMU_SCU0, 0);
-	em_route_irq(IRQ_EB11MP_PMU_SCU1, 0);
-	em_route_irq(IRQ_EB11MP_PMU_SCU2, 1);
-	em_route_irq(IRQ_EB11MP_PMU_SCU3, 1);
-	em_route_irq(IRQ_EB11MP_PMU_SCU4, 2);
-	em_route_irq(IRQ_EB11MP_PMU_SCU5, 2);
-	em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
-	em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
-
-	/*
-	 * Send CP15 PMU interrupts to the owner CPU.
-	 */
-	em_route_irq(IRQ_EB11MP_PMU_CPU0, 0);
-	em_route_irq(IRQ_EB11MP_PMU_CPU1, 1);
-	em_route_irq(IRQ_EB11MP_PMU_CPU2, 2);
-	em_route_irq(IRQ_EB11MP_PMU_CPU3, 3);
-
-	return 0;
-}
-
-struct op_arm_model_spec op_mpcore_spec = {
-	.init		= em_setup,
-	.num_counters	= MPCORE_NUM_COUNTERS,
-	.setup_ctrs	= em_setup_ctrs,
-	.start		= em_start,
-	.stop		= em_stop,
-	.name		= "arm/mpcore",
-};
diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h
deleted file mode 100644
index 73d8110..0000000
--- a/arch/arm/oprofile/op_model_mpcore.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/**
- * @file op_model_mpcore.c
- * MPCORE Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-#ifndef OP_MODEL_MPCORE_H
-#define OP_MODEL_MPCORE_H
-
-struct eventmonitor {
-	unsigned long PMCR;
-	unsigned char MCEB[8];
-	unsigned long MC[8];
-};
-
-/*
- * List of userspace counter numbers: note that the structure is important.
- * The code relies on CPUn's counters being CPU0's counters + 3n
- * and on CPU0's counters starting at 0
- */
-
-#define COUNTER_CPU0_PMN0 0
-#define COUNTER_CPU0_PMN1 1
-#define COUNTER_CPU0_CCNT 2
-
-#define COUNTER_CPU1_PMN0 3
-#define COUNTER_CPU1_PMN1 4
-#define COUNTER_CPU1_CCNT 5
-
-#define COUNTER_CPU2_PMN0 6
-#define COUNTER_CPU2_PMN1 7
-#define COUNTER_CPU2_CCNT 8
-
-#define COUNTER_CPU3_PMN0 9
-#define COUNTER_CPU3_PMN1 10
-#define COUNTER_CPU3_CCNT 11
-
-#define COUNTER_SCU_MN0 12
-#define COUNTER_SCU_MN1 13
-#define COUNTER_SCU_MN2 14
-#define COUNTER_SCU_MN3 15
-#define COUNTER_SCU_MN4 16
-#define COUNTER_SCU_MN5 17
-#define COUNTER_SCU_MN6 18
-#define COUNTER_SCU_MN7 19
-#define NUM_SCU_COUNTERS 8
-
-#define SCU_COUNTER(number)	((number) + COUNTER_SCU_MN0)
-
-#define MPCORE_NUM_COUNTERS	SCU_COUNTER(NUM_SCU_COUNTERS)
-
-#endif
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
deleted file mode 100644
index f7d2ec5..0000000
--- a/arch/arm/oprofile/op_model_v6.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/**
- * @file op_model_v6.c
- * ARM11 Performance Monitor Driver
- *
- * Based on op_model_xscale.c
- *
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 OProfile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Tony Lindgren <tony@atomide.com>
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP2
-	3,
-#endif
-#ifdef CONFIG_ARCH_BCMRING
-	IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
-#endif
-};
-
-static void armv6_pmu_stop(void)
-{
-	arm11_stop_pmu();
-	arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
-}
-
-static int armv6_pmu_start(void)
-{
-	int ret;
-
-	ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
-	if (ret >= 0)
-		ret = arm11_start_pmu();
-
-	return ret;
-}
-
-static int armv6_detect_pmu(void)
-{
-	return 0;
-}
-
-struct op_arm_model_spec op_armv6_spec = {
-	.init		= armv6_detect_pmu,
-	.num_counters	= 3,
-	.setup_ctrs	= arm11_setup_pmu,
-	.start		= armv6_pmu_start,
-	.stop		= armv6_pmu_stop,
-	.name		= "arm/armv6",
-};
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
deleted file mode 100644
index 2088a6c..0000000
--- a/arch/arm/oprofile/op_model_v7.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/**
- * op_model_v7.c
- * ARM V7 (Cortex A8) Event Monitor Driver
- *
- * Copyright 2008 Jean Pihet <jpihet@mvista.com>
- * Copyright 2004 ARM SMP Development Team
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_v7.h"
-
-/* #define DEBUG */
-
-
-/*
- * ARM V7 PMNC support
- */
-
-static u32 cnt_en[CNTMAX];
-
-static inline void armv7_pmnc_write(u32 val)
-{
-	val &= PMNC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
-}
-
-static inline u32 armv7_pmnc_read(void)
-{
-	u32 val;
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	return val;
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = CNTENS_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= CNTENS_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = CNTENC_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= CNTENC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = INTENS_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= INTENS_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if ((cnt == CCNT) || (cnt >= CNTMAX)) {
-		printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	val = (cnt - CNT0) & SELECT_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
-	return cnt;
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
-{
-	if (armv7_pmnc_select_counter(cnt) == cnt) {
-		val &= EVTSEL_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static void armv7_pmnc_reset_counter(unsigned int cnt)
-{
-	u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-	u32 val = -(u32)counter_config[cpu_cnt].count;
-
-	switch (cnt) {
-	case CCNT:
-		armv7_pmnc_disable_counter(cnt);
-
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
-
-		if (cnt_en[cnt] != 0)
-		    armv7_pmnc_enable_counter(cnt);
-
-		break;
-
-	case CNT0:
-	case CNT1:
-	case CNT2:
-	case CNT3:
-		armv7_pmnc_disable_counter(cnt);
-
-		if (armv7_pmnc_select_counter(cnt) == cnt)
-		    asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
-
-		if (cnt_en[cnt] != 0)
-		    armv7_pmnc_enable_counter(cnt);
-
-		break;
-
-	default:
-		printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		break;
-	}
-}
-
-int armv7_setup_pmnc(void)
-{
-	unsigned int cnt;
-
-	if (armv7_pmnc_read() & PMNC_E) {
-		printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
-			" new event counter.\n", smp_processor_id());
-		return -EBUSY;
-	}
-
-	/* Initialize & Reset PMNC: C bit and P bit */
-	armv7_pmnc_write(PMNC_P | PMNC_C);
-
-
-	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
-		unsigned long event;
-		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-
-		/*
-		 * Disable counter
-		 */
-		armv7_pmnc_disable_counter(cnt);
-		cnt_en[cnt] = 0;
-
-		if (!counter_config[cpu_cnt].enabled)
-			continue;
-
-		event = counter_config[cpu_cnt].event & 255;
-
-		/*
-		 * Set event (if destined for PMNx counters)
-		 * We don't need to set the event if it's a cycle count
-		 */
-		if (cnt != CCNT)
-			armv7_pmnc_write_evtsel(cnt, event);
-
-		/*
-		 * Enable interrupt for this counter
-		 */
-		armv7_pmnc_enable_intens(cnt);
-
-		/*
-		 * Reset counter
-		 */
-		armv7_pmnc_reset_counter(cnt);
-
-		/*
-		 * Enable counter
-		 */
-		armv7_pmnc_enable_counter(cnt);
-		cnt_en[cnt] = 1;
-	}
-
-	return 0;
-}
-
-static inline void armv7_start_pmnc(void)
-{
-	armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
-}
-
-static inline void armv7_stop_pmnc(void)
-{
-	armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
-}
-
-/*
- * CPU counters' IRQ handler (one IRQ per CPU)
- */
-static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned int cnt;
-	u32 flags;
-
-
-	/*
-	 * Stop IRQ generation
-	 */
-	armv7_stop_pmnc();
-
-	/*
-	 * Get and reset overflow status flags
-	 */
-	flags = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Cycle counter
-	 */
-	if (flags & FLAG_C) {
-		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
-		armv7_pmnc_reset_counter(CCNT);
-		oprofile_add_sample(regs, cpu_cnt);
-	}
-
-	/*
-	 * PMNC counters 0:3
-	 */
-	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-		if (flags & (1 << (cnt - CNT0))) {
-			u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-			armv7_pmnc_reset_counter(cnt);
-			oprofile_add_sample(regs, cpu_cnt);
-		}
-	}
-
-	/*
-	 * Allow IRQ generation
-	 */
-	armv7_start_pmnc();
-
-	return IRQ_HANDLED;
-}
-
-int armv7_request_interrupts(int *irqs, int nr)
-{
-	unsigned int i;
-	int ret = 0;
-
-	for (i = 0; i < nr; i++) {
-		ret = request_irq(irqs[i], armv7_pmnc_interrupt,
-				IRQF_DISABLED, "CP15 PMNC", NULL);
-		if (ret != 0) {
-			printk(KERN_ERR "oprofile: unable to request IRQ%u"
-				" for ARMv7\n",
-			       irqs[i]);
-			break;
-		}
-	}
-
-	if (i != nr)
-		while (i-- != 0)
-			free_irq(irqs[i], NULL);
-
-	return ret;
-}
-
-void armv7_release_interrupts(int *irqs, int nr)
-{
-	unsigned int i;
-
-	for (i = 0; i < nr; i++)
-		free_irq(irqs[i], NULL);
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
-	}
-}
-#endif
-
-
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP3
-	INT_34XX_BENCH_MPU_EMUL,
-#endif
-};
-
-static void armv7_pmnc_stop(void)
-{
-#ifdef DEBUG
-	armv7_pmnc_dump_regs();
-#endif
-	armv7_stop_pmnc();
-	armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
-}
-
-static int armv7_pmnc_start(void)
-{
-	int ret;
-
-#ifdef DEBUG
-	armv7_pmnc_dump_regs();
-#endif
-	ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
-	if (ret >= 0)
-		armv7_start_pmnc();
-
-	return ret;
-}
-
-static int armv7_detect_pmnc(void)
-{
-	return 0;
-}
-
-struct op_arm_model_spec op_armv7_spec = {
-	.init		= armv7_detect_pmnc,
-	.num_counters	= 5,
-	.setup_ctrs	= armv7_setup_pmnc,
-	.start		= armv7_pmnc_start,
-	.stop		= armv7_pmnc_stop,
-	.name		= "arm/armv7",
-};
diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
deleted file mode 100644
index 0e19bcc..0000000
--- a/arch/arm/oprofile/op_model_v7.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/**
- * op_model_v7.h
- * ARM v7 (Cortex A8) Event Monitor Driver
- *
- * Copyright 2008 Jean Pihet <jpihet@mvista.com>
- * Copyright 2004 ARM SMP Development Team
- * Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * Copyright 2000-2004 MontaVista Software Inc
- * Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * Copyright 2004 Intel Corporation
- * Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * Copyright 2004 Oprofile Authors
- *
- * Read the file COPYING
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OP_MODEL_V7_H
-#define OP_MODEL_V7_H
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define PMNC_E		(1 << 0)	/* Enable all counters */
-#define PMNC_P		(1 << 1)	/* Reset all counters */
-#define PMNC_C		(1 << 2)	/* Cycle counter reset */
-#define PMNC_D		(1 << 3)	/* CCNT counts every 64th cpu cycle */
-#define PMNC_X		(1 << 4)	/* Export to ETM */
-#define PMNC_DP		(1 << 5)	/* Disable CCNT if non-invasive debug*/
-#define	PMNC_MASK	0x3f		/* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define CCNT 		0
-#define CNT0 		1
-#define CNT1 		2
-#define CNT2 		3
-#define CNT3 		4
-#define CNTMAX 		5
-
-#define CPU_COUNTER(cpu, counter)	((cpu) * CNTMAX + (counter))
-
-/*
- * CNTENS: counters enable reg
- */
-#define CNTENS_P0	(1 << 0)
-#define CNTENS_P1	(1 << 1)
-#define CNTENS_P2	(1 << 2)
-#define CNTENS_P3	(1 << 3)
-#define CNTENS_C	(1 << 31)
-#define	CNTENS_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * CNTENC: counters disable reg
- */
-#define CNTENC_P0	(1 << 0)
-#define CNTENC_P1	(1 << 1)
-#define CNTENC_P2	(1 << 2)
-#define CNTENC_P3	(1 << 3)
-#define CNTENC_C	(1 << 31)
-#define	CNTENC_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define INTENS_P0	(1 << 0)
-#define INTENS_P1	(1 << 1)
-#define INTENS_P2	(1 << 2)
-#define INTENS_P3	(1 << 3)
-#define INTENS_C	(1 << 31)
-#define	INTENS_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * EVTSEL: Event selection reg
- */
-#define	EVTSEL_MASK	0x7f		/* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define	SELECT_MASK	0x1f		/* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define FLAG_P0		(1 << 0)
-#define FLAG_P1		(1 << 1)
-#define FLAG_P2		(1 << 2)
-#define FLAG_P3		(1 << 3)
-#define FLAG_C		(1 << 31)
-#define	FLAG_MASK	0x8000000f	/* Mask for writable bits */
-
-
-int armv7_setup_pmu(void);
-int armv7_start_pmu(void);
-int armv7_stop_pmu(void);
-int armv7_request_interrupts(int *, int);
-void armv7_release_interrupts(int *, int);
-
-#endif
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
deleted file mode 100644
index 724ab9c..0000000
--- a/arch/arm/oprofile/op_model_xscale.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/**
- * @file op_model_xscale.c
- * XScale Performance Monitor Driver
- *
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 OProfile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/cputype.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-
-#define	PMU_ENABLE	0x001	/* Enable counters */
-#define PMN_RESET	0x002	/* Reset event counters */
-#define	CCNT_RESET	0x004	/* Reset clock counter */
-#define	PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define PMU_CNT64	0x008	/* Make CCNT count every 64th cycle */
-
-/* TODO do runtime detection */
-#ifdef CONFIG_ARCH_IOP32X
-#define XSCALE_PMU_IRQ  IRQ_IOP32X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define XSCALE_PMU_IRQ  IRQ_IOP33X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_PXA
-#define XSCALE_PMU_IRQ  IRQ_PMU
-#endif
-
-/*
- * Different types of events that can be counted by the XScale PMU
- * as used by Oprofile userspace. Here primarily for documentation
- * purposes.
- */
-
-#define EVT_ICACHE_MISS			0x00
-#define	EVT_ICACHE_NO_DELIVER		0x01
-#define	EVT_DATA_STALL			0x02
-#define	EVT_ITLB_MISS			0x03
-#define	EVT_DTLB_MISS			0x04
-#define	EVT_BRANCH			0x05
-#define	EVT_BRANCH_MISS			0x06
-#define	EVT_INSTRUCTION			0x07
-#define	EVT_DCACHE_FULL_STALL		0x08
-#define	EVT_DCACHE_FULL_STALL_CONTIG	0x09
-#define	EVT_DCACHE_ACCESS		0x0A
-#define	EVT_DCACHE_MISS			0x0B
-#define	EVT_DCACE_WRITE_BACK		0x0C
-#define	EVT_PC_CHANGED			0x0D
-#define	EVT_BCU_REQUEST			0x10
-#define	EVT_BCU_FULL			0x11
-#define	EVT_BCU_DRAIN			0x12
-#define	EVT_BCU_ECC_NO_ELOG		0x14
-#define	EVT_BCU_1_BIT_ERR		0x15
-#define	EVT_RMW				0x16
-/* EVT_CCNT is not hardware defined */
-#define EVT_CCNT			0xFE
-#define EVT_UNUSED			0xFF
-
-struct pmu_counter {
-	volatile unsigned long ovf;
-	unsigned long reset_counter;
-};
-
-enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };
-
-static struct pmu_counter results[MAX_COUNTERS];
-
-/*
- * There are two versions of the PMU in current XScale processors
- * with differing register layouts and number of performance counters.
- * e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
- * We detect which register layout to use in xscale_detect_pmu()
- */
-enum { PMU_XSC1, PMU_XSC2 };
-
-struct pmu_type {
-	int id;
-	char *name;
-	int num_counters;
-	unsigned int int_enable;
-	unsigned int cnt_ovf[MAX_COUNTERS];
-	unsigned int int_mask[MAX_COUNTERS];
-};
-
-static struct pmu_type pmu_parms[] = {
-	{
-		.id		= PMU_XSC1,
-		.name		= "arm/xscale1",
-		.num_counters	= 3,
-		.int_mask	= { [PMN0] = 0x10, [PMN1] = 0x20,
-				    [CCNT] = 0x40 },
-		.cnt_ovf	= { [CCNT] = 0x400, [PMN0] = 0x100,
-				    [PMN1] = 0x200},
-	},
-	{
-		.id		= PMU_XSC2,
-		.name		= "arm/xscale2",
-		.num_counters	= 5,
-		.int_mask	= { [CCNT] = 0x01, [PMN0] = 0x02,
-				    [PMN1] = 0x04, [PMN2] = 0x08,
-				    [PMN3] = 0x10 },
-		.cnt_ovf	= { [CCNT] = 0x01, [PMN0] = 0x02,
-				    [PMN1] = 0x04, [PMN2] = 0x08,
-				    [PMN3] = 0x10 },
-	},
-};
-
-static struct pmu_type *pmu;
-
-static void write_pmnc(u32 val)
-{
-	if (pmu->id == PMU_XSC1) {
-		/* upper 4bits and 7, 11 are write-as-0 */
-		val &= 0xffff77f;
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-	} else {
-		/* bits 4-23 are write-as-0, 24-31 are write ignored */
-		val &= 0xf;
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-	}
-}
-
-static u32 read_pmnc(void)
-{
-	u32 val;
-
-	if (pmu->id == PMU_XSC1)
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	else {
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-		/* bits 1-2 and 4-23 are read-unpredictable */
-		val &= 0xff000009;
-	}
-
-	return val;
-}
-
-static u32 __xsc1_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-	return val;
-}
-
-static u32 __xsc2_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case PMN2:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case PMN3:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-	return val;
-}
-
-static u32 read_counter(int counter)
-{
-	u32 val;
-
-	if (pmu->id == PMU_XSC1)
-		val = __xsc1_read_counter(counter);
-	else
-		val = __xsc2_read_counter(counter);
-
-	return val;
-}
-
-static void __xsc1_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static void __xsc2_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case PMN2:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case PMN3:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static void write_counter(int counter, u32 val)
-{
-	if (pmu->id == PMU_XSC1)
-		__xsc1_write_counter(counter, val);
-	else
-		__xsc2_write_counter(counter, val);
-}
-
-static int xscale_setup_ctrs(void)
-{
-	u32 evtsel, pmnc;
-	int i;
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (counter_config[i].enabled)
-			continue;
-
-		counter_config[i].event = EVT_UNUSED;
-	}
-
-	switch (pmu->id) {
-	case PMU_XSC1:
-		pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12);
-		pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
-		write_pmnc(pmnc);
-		break;
-
-	case PMU_XSC2:
-		evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) |
-			(counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24);
-
-		pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
-		__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
-		break;
-	}
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (counter_config[i].event == EVT_UNUSED) {
-			counter_config[i].event = 0;
-			pmu->int_enable &= ~pmu->int_mask[i];
-			continue;
-		}
-
-		results[i].reset_counter = counter_config[i].count;
-		write_counter(i, -(u32)counter_config[i].count);
-		pmu->int_enable |= pmu->int_mask[i];
-		pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
-			read_counter(i), counter_config[i].count);
-	}
-
-	return 0;
-}
-
-static void inline __xsc1_check_ctrs(void)
-{
-	int i;
-	u32 pmnc = read_pmnc();
-
-	/* NOTE: there's an A stepping errata that states if an overflow */
-	/*       bit already exists and another occurs, the previous     */
-	/*       Overflow bit gets cleared. There's no workaround.	 */
-	/*	 Fixed in B stepping or later			 	 */
-
-	/* Write the value back to clear the overflow flags. Overflow */
-	/* flags remain in pmnc for use below */
-	write_pmnc(pmnc & ~PMU_ENABLE);
-
-	for (i = CCNT; i <= PMN1; i++) {
-		if (!(pmu->int_mask[i] & pmu->int_enable))
-			continue;
-
-		if (pmnc & pmu->cnt_ovf[i])
-			results[i].ovf++;
-	}
-}
-
-static void inline __xsc2_check_ctrs(void)
-{
-	int i;
-	u32 flag = 0, pmnc = read_pmnc();
-
-	pmnc &= ~PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	/* read overflow flag register */
-	__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));
-
-	for (i = CCNT; i <= PMN3; i++) {
-		if (!(pmu->int_mask[i] & pmu->int_enable))
-			continue;
-
-		if (flag & pmu->cnt_ovf[i])
-			results[i].ovf++;
-	}
-
-	/* writeback clears overflow bits */
-	__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
-}
-
-static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
-{
-	int i;
-	u32 pmnc;
-
-	if (pmu->id == PMU_XSC1)
-		__xsc1_check_ctrs();
-	else
-		__xsc2_check_ctrs();
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (!results[i].ovf)
-			continue;
-
-		write_counter(i, -(u32)results[i].reset_counter);
-		oprofile_add_sample(get_irq_regs(), i);
-		results[i].ovf--;
-	}
-
-	pmnc = read_pmnc() | PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void xscale_pmu_stop(void)
-{
-	u32 pmnc = read_pmnc();
-
-	pmnc &= ~PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	free_irq(XSCALE_PMU_IRQ, results);
-}
-
-static int xscale_pmu_start(void)
-{
-	int ret;
-	u32 pmnc = read_pmnc();
-
-	ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, IRQF_DISABLED,
-			"XScale PMU", (void *)results);
-
-	if (ret < 0) {
-		printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
-			XSCALE_PMU_IRQ);
-		return ret;
-	}
-
-	if (pmu->id == PMU_XSC1)
-		pmnc |= pmu->int_enable;
-	else {
-		__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
-		pmnc &= ~PMU_CNT64;
-	}
-
-	pmnc |= PMU_ENABLE;
-	write_pmnc(pmnc);
-	pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
-	return 0;
-}
-
-static int xscale_detect_pmu(void)
-{
-	int ret = 0;
-	u32 id;
-
-	id = (read_cpuid(CPUID_ID) >> 13) & 0x7;
-
-	switch (id) {
-	case 1:
-		pmu = &pmu_parms[PMU_XSC1];
-		break;
-	case 2:
-		pmu = &pmu_parms[PMU_XSC2];
-		break;
-	default:
-		ret = -ENODEV;
-		break;
-	}
-
-	if (!ret) {
-		op_xscale_spec.name = pmu->name;
-		op_xscale_spec.num_counters = pmu->num_counters;
-		pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
-	}
-
-	return ret;
-}
-
-struct op_arm_model_spec op_xscale_spec = {
-	.init		= xscale_detect_pmu,
-	.setup_ctrs	= xscale_setup_ctrs,
-	.start		= xscale_pmu_start,
-	.stop		= xscale_pmu_stop,
-};
-
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 36bff03..69b09c1 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_IOP32X) += time.o
 obj-$(CONFIG_ARCH_IOP32X) += io.o
 obj-$(CONFIG_ARCH_IOP32X) += cp6.o
 obj-$(CONFIG_ARCH_IOP32X) += adma.o
+obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 
 # IOP33X
 obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_ARCH_IOP33X) += time.o
 obj-$(CONFIG_ARCH_IOP33X) += io.o
 obj-$(CONFIG_ARCH_IOP33X) += cp6.o
 obj-$(CONFIG_ARCH_IOP33X) += adma.o
+obj-$(CONFIG_ARCH_IOP33X) += pmu.o
 
 # IOP13XX
 obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index ed0bbec..e15bc17 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -34,7 +34,8 @@ void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
 		retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
 		break;
 	default:
-		retval = __arm_ioremap(cookie, size, mtype);
+		retval = __arm_ioremap_caller(cookie, size, mtype,
+				__builtin_return_address(0));
 	}
 
 	return retval;
diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c
new file mode 100644
index 0000000..a2024b8
--- /dev/null
+++ b/arch/arm/plat-iop/pmu.c
@@ -0,0 +1,40 @@
+/*
+ * PMU IRQ registration for the iop3xx xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource pmu_resource = {
+#ifdef CONFIG_ARCH_IOP32X
+	.start	= IRQ_IOP32X_CORE_PMU,
+	.end	= IRQ_IOP32X_CORE_PMU,
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+	.start	= IRQ_IOP33X_CORE_PMU,
+	.end	= IRQ_IOP33X_CORE_PMU,
+#endif
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+static int __init iop3xx_pmu_init(void)
+{
+	platform_device_register(&pmu_device);
+	return 0;
+}
+
+arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee..7f7ad6f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,38 +9,43 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX25
 	bool "MX25-based"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select ARCH_MXC_IOMUX_V3
+	select HAVE_FB_IMX
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
 config ARCH_MXC91231
 	bool "MXC91231-based"
 	select CPU_V6
-	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale MXC91231 family
 
+config ARCH_MX5
+	bool "MX5-based"
+	select CPU_V7
+	help
+	  This enables support for systems based on the Freescale i.MX51 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
@@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 
 config MXC_IRQ_PRIOR
 	bool "Use IRQ priority"
-	depends on ARCH_MXC
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
@@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
 
+config MXC_TZIC
+	bool "Enable TrustZone Interrupt Controller"
+	depends on ARCH_MX51
+	help
+	  This will be automatically selected for all processors
+	  containing this interrupt controller.
+	  Say N here only if you are really sure.
+
 config MXC_PWM
 	tristate "Enable PWM driver"
-	depends on ARCH_MXC
 	select HAVE_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
@@ -74,7 +86,9 @@ config MXC_ULPI
 
 config ARCH_HAS_RNGA
 	bool
-	depends on ARCH_MXC
+
+config IMX_HAVE_IOMUX_V1
+	bool
 
 config ARCH_MXC_IOMUX_V3
 	bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 996cbac..895bc3c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,11 +5,19 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
+obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index da6387d..b62917c 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
 
 static int mxc_audmux_v1_init(void)
 {
-	if (cpu_is_mx27() || cpu_is_mx21())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
+	else
+#endif
+		(void)0;
+	
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096..0c2cc5c 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
@@ -32,6 +34,140 @@ static void __iomem *audmux_base;
 #define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
 #define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
 
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
 int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		unsigned int pdcr)
 {
@@ -55,7 +191,10 @@ static int mxc_audmux_v2_init(void)
 {
 	int ret;
 
-	if (cpu_is_mx35()) {
+	if (cpu_is_mx31())
+		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
+
+	else if (cpu_is_mx35()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
 			ret = PTR_ERR(audmux_clk);
@@ -63,10 +202,10 @@ static int mxc_audmux_v2_init(void)
 					ret);
 			return ret;
 		}
+		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
 
-	if (cpu_is_mx31() || cpu_is_mx35())
-		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+	audmux_debugfs_init();
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 9e8fbd5..323ff8c 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk)
 	__clk_disable(clk->parent);
 	__clk_disable(clk->secondary);
 
+	WARN_ON(!clk->usecount);
 	if (!(--clk->usecount) && clk->disable)
 		clk->disable(clk);
 }
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 9c1b3f9..e16014b 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -128,6 +128,18 @@ struct imx_dma_channel {
 	int hw_chaining;
 };
 
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+	__raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+	return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
 static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
 static struct clk *dma_clk;
@@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
 		return 0;
 }
 
-
 /*
  * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
  */
@@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
 	else
-		__raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
 
-	__raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(now, DMA_CNTR(channel));
 
 	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
 		"size 0x%08x\n", channel,
-		 __raw_readl(DMA_BASE + DMA_DAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_SAR(channel)),
-		 __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+		 imx_dmav1_readl(DMA_DAR(channel)),
+		 imx_dmav1_readl(DMA_SAR(channel)),
+		 imx_dmav1_readl(DMA_CNTR(channel)));
 
 	return now;
 }
@@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(dma_address, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, (unsigned int)dma_address,
 			dma_length, dev_addr);
 
-		__raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dma_address, DMA_SAR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device,
+				DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
 		       channel);
 		return -EINVAL;
 	}
 
-	__raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
 
 	return 0;
 }
@@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel,
 			"dev_addr=0x%08x for read\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-		__raw_writel(imxdma->ccr_from_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
 	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
 		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
 			"dev_addr=0x%08x for write\n",
 			channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-		__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-		__raw_writel(imxdma->ccr_to_device,
-				DMA_BASE + DMA_CCR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
 	} else {
 		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
 		       channel);
@@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port,
 	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
 	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
 
-	__raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
 
 	return 0;
 }
@@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel);
 
 void imx_dma_config_burstlen(int channel, unsigned int burstlen)
 {
-	__raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+	imx_dmav1_writel(burstlen, DMA_BLR(channel));
 }
 EXPORT_SYMBOL(imx_dma_config_burstlen);
 
@@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel,
 	}
 
 	local_irq_save(flags);
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->irq_handler = irq_handler;
 	imxdma->err_handler = err_handler;
 	imxdma->data = data;
@@ -462,22 +470,21 @@ void imx_dma_enable(int channel)
 
 	local_irq_save(flags);
 
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
-		CCR_ACRPT,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT, DMA_CCR(channel));
 
 #ifdef CONFIG_ARCH_MX2
-	if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+	if ((cpu_is_mx21() || cpu_is_mx27()) &&
+			imxdma->sg && imx_dma_hw_chain(imxdma)) {
 		imxdma->sg = sg_next(imxdma->sg);
 		if (imxdma->sg) {
 			u32 tmp;
 			imx_dma_sg_next(channel, imxdma->sg);
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
-			__raw_writel(tmp | CCR_RPT | CCR_ACRPT,
-				DMA_BASE + DMA_CCR(channel));
+			tmp = imx_dmav1_readl(DMA_CCR(channel));
+			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_CCR(channel));
 		}
 	}
 #endif
@@ -502,11 +509,10 @@ void imx_dma_disable(int channel)
 		del_timer(&imxdma->watchdog);
 
 	local_irq_save(flags);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
-	__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+			DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
 	imxdma->in_use = 0;
 	local_irq_restore(flags);
 }
@@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	imxdma->sg = NULL;
 
@@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
 	unsigned int err_mask;
 	int errcode;
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
-	err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DRTOSR) |
-		   __raw_readl(DMA_BASE + DMA_DSESR)  |
-		   __raw_readl(DMA_BASE + DMA_DBOSR);
+	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+		   imx_dmav1_readl(DMA_DRTOSR) |
+		   imx_dmav1_readl(DMA_DSESR)  |
+		   imx_dmav1_readl(DMA_DBOSR);
 
 	if (!err_mask)
 		return IRQ_HANDLED;
 
-	__raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr & err_mask, DMA_DISR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (!(err_mask & (1 << i)))
@@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
 		imxdma = &imx_dma_channels[i];
 		errcode = 0;
 
-		if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBTOSR);
 			errcode |= IMX_DMA_ERR_BURST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DRTOSR);
 			errcode |= IMX_DMA_ERR_REQUEST;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DSESR);
 			errcode |= IMX_DMA_ERR_TRANSFER;
 		}
-		if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
-			__raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBOSR);
 			errcode |= IMX_DMA_ERR_BUFFER;
 		}
 		if (imxdma->name && imxdma->err_handler) {
@@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno)
 		if (imxdma->sg) {
 			imx_dma_sg_next(chno, imxdma->sg);
 
-			tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+			tmp = imx_dmav1_readl(DMA_CCR(chno));
 
 			if (imx_dma_hw_chain(imxdma)) {
 				/* FIXME: The timeout should probably be
@@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno)
 					jiffies + msecs_to_jiffies(500));
 
 				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-				__raw_writel(tmp, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp, DMA_CCR(chno));
 			} else {
-				__raw_writel(tmp & ~CCR_CEN, DMA_BASE +
-						DMA_CCR(chno));
+				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
 				tmp |= CCR_CEN;
 			}
 
-			__raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+			imx_dmav1_writel(tmp, DMA_CCR(chno));
 
 			if (imxdma->prog_handler)
 				imxdma->prog_handler(chno, imxdma->data,
@@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno)
 		}
 	}
 
-	__raw_writel(0, DMA_BASE + DMA_CCR(chno));
+	imx_dmav1_writel(0, DMA_CCR(chno));
 	imxdma->in_use = 0;
 	if (imxdma->irq_handler)
 		imxdma->irq_handler(chno, imxdma->data);
@@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 	int i, disr;
 
 #ifdef CONFIG_ARCH_MX2
-	dma_err_handler(irq, dev_id);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		dma_err_handler(irq, dev_id);
 #endif
 
-	disr = __raw_readl(DMA_BASE + DMA_DISR);
+	disr = imx_dmav1_readl(DMA_DISR);
 
 	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
 		     disr);
 
-	__raw_writel(disr, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel(disr, DMA_DISR);
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		if (disr & (1 << i))
 			dma_irq_handle_channel(i);
@@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name)
 	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
-	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
-			NULL);
-	if (ret) {
-		imxdma->name = NULL;
-		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
-				MXC_INT_DMACH0 + channel, channel);
-		return ret;
+	if (cpu_is_mx21() || cpu_is_mx27()) {
+		ret = request_irq(MX2x_INT_DMACH0 + channel,
+				dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			imxdma->name = NULL;
+			pr_crit("Can't register IRQ %d for DMA channel %d\n",
+					MX2x_INT_DMACH0 + channel, channel);
+			return ret;
+		}
+		init_timer(&imxdma->watchdog);
+		imxdma->watchdog.function = &imx_dma_watchdog;
+		imxdma->watchdog.data = channel;
 	}
-	init_timer(&imxdma->watchdog);
-	imxdma->watchdog.function = &imx_dma_watchdog;
-	imxdma->watchdog.data = channel;
 #endif
 
 	return ret;
@@ -738,7 +745,8 @@ void imx_dma_free(int channel)
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2
-	free_irq(MXC_INT_DMACH0 + channel, NULL);
+	if (cpu_is_mx21() || cpu_is_mx27())
+		free_irq(MX2x_INT_DMACH0 + channel, NULL);
 #endif
 
 	local_irq_restore(flags);
@@ -796,34 +804,53 @@ static int __init imx_dma_init(void)
 	int ret = 0;
 	int i;
 
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1())
+		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+	else
+#endif
+		BUG();
+
 	dma_clk = clk_get(NULL, "dma");
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
-	__raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
 #ifdef CONFIG_ARCH_MX1
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
+	if (cpu_is_mx1()) {
+		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register IRQ for DMA\n");
+			return ret;
+		}
 
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-		return ret;
+		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+			free_irq(MX1_DMA_INT, NULL);
+			return ret;
+		}
 	}
 #endif
 	/* enable DMA module */
-	__raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+	imx_dmav1_writel(DCR_DEN, DMA_DCR);
 
 	/* clear all interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
 
 	/* disable interrupts */
-	__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
 
 	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
 		imx_dma_channels[i].sg = NULL;
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 41599be..2a864617 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -25,25 +26,56 @@
 #define USBCTRL_OTGBASE_OFFSET	0x600
 
 #define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
 #define MX31_OTG_PM_BIT		(1 << 24)
 
 #define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
 #define MX31_H2_PM_BIT		(1 << 16)
 #define MX31_H2_DT_BIT		(1 << 5)
 
 #define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
 #define MX31_H1_PM_BIT		(1 << 8)
 #define MX31_H1_DT_BIT		(1 << 4)
 
-int mxc_set_usbcontrol(int port, unsigned int flags)
+#define MX35_OTG_SIC_SHIFT	29
+#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT		(1 << 24)
+
+#define MX35_H1_SIC_SHIFT	21
+#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
+#define MX35_H1_TLL_BIT		(1 << 5)
+#define MX35_H1_USBTE_BIT	(1 << 4)
+
+#define MXC_OTG_OFFSET		0
+#define MXC_H1_OFFSET		0x200
+
+/* USB_CTRL */
+#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
+#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+
+/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
+
+#define MXC_USBCMD_OFFSET			0x140
+
+/* USBCMD */
+#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
+
+int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
-
+#ifdef CONFIG_ARCH_MX3
 	if (cpu_is_mx31()) {
-		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -51,15 +83,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 					<< MX31_OTG_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_OTG_PM_BIT;
 
 			break;
 		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H1_SIC_SHIFT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
 				v |= MX31_H1_PM_BIT;
 
 			if (!(flags & MXC_EHCI_TTL_ENABLED))
@@ -67,7 +99,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 
 			break;
 		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
 			v |= (flags & MXC_EHCI_INTERFACE_MASK)
 						<< MX31_H2_SIC_SHIFT;
 			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
@@ -77,16 +109,182 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 				v |= MX31_H2_DT_BIT;
 
 			break;
+		default:
+			return -EINVAL;
 		}
 
-		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
 
+	if (cpu_is_mx35()) {
+		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX3 */
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
+		 * are identical
+		 */
+		v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_OTG_PM_BIT;
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+		writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_MACH_MX27 */
+#ifdef CONFIG_ARCH_MX51
+	if (cpu_is_mx51()) {
+		void __iomem *usb_base;
+		u32 usbotg_base;
+		u32 usbother_base;
+		int ret = 0;
+
+		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+
+		switch (port) {
+		case 0:	/* OTG port */
+			usbotg_base = usb_base + MXC_OTG_OFFSET;
+			break;
+		case 1:	/* Host 1 port */
+			usbotg_base = usb_base + MXC_H1_OFFSET;
+			break;
+		default:
+			printk(KERN_ERR"%s no such port %d\n", __func__, port);
+			ret = -ENOENT;
+			goto error;
+		}
+		usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+		switch (port) {
+		case 0:	/*OTG port */
+			if (flags & MXC_EHCI_INTERNAL_PHY) {
+				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+					v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
+				else
+					v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
+				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+				if (flags & MXC_EHCI_WAKEUP_ENABLED)
+					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
+				else
+					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+			}
+			break;
+		case 1:	/* Host 1 */
+			/*Host ULPI */
+			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED)
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+			else
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			else
+				v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+
+			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
+			else
+				v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
+			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
+			if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
+				/* Interrupt Threshold Control:Immediate (no threshold) */
+				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
+			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
+			break;
+		}
+
+error:
+		iounmap(usb_base);
+		return ret;
+	}
+#endif
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
 	return -EINVAL;
 }
-EXPORT_SYMBOL(mxc_set_usbcontrol);
+EXPORT_SYMBOL(mxc_initialize_usb_hw);
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe3..71437c6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -3,7 +3,7 @@
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
  * Based on code from Freescale,
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -38,7 +38,6 @@ static int gpio_table_size;
 #define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
 #define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
 #define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
-#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
 
 #define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
 #define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
@@ -140,16 +139,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	val = __raw_readl(reg);
 	edge = (val >> (bit << 1)) & 3;
 	val &= ~(0x3 << (bit << 1));
-	switch (edge) {
-	case GPIO_INT_HIGH_LEV:
+	if (edge == GPIO_INT_HIGH_LEV) {
 		edge = GPIO_INT_LOW_LEV;
 		pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-		break;
-	case GPIO_INT_LOW_LEV:
+	} else if (edge == GPIO_INT_LOW_LEV) {
 		edge = GPIO_INT_HIGH_LEV;
 		pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-		break;
-	default:
+	} else {
 		pr_err("mxc: invalid configuration for GPIO %d: %x\n",
 		       gpio, edge);
 		return;
@@ -157,25 +153,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 	__raw_writel(val | (edge << (bit << 1)), reg);
 }
 
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-	u32 gpio_irq_no;
-
-	gpio_irq_no = port->virtual_irq_start;
-	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-		u32 gpio = irq_to_gpio(gpio_irq_no);
+	u32 gpio_irq_no_base = port->virtual_irq_start;
 
-		if ((irq_stat & 1) == 0)
-			continue;
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
 
-		BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+		if (port->both_edges & (1 << irqoffset))
+			mxc_flip_edge(port, irqoffset);
 
-		if (port->both_edges & (1 << (gpio & 31)))
-			mxc_flip_edge(port, gpio);
+		generic_handle_irq(gpio_irq_no_base + irqoffset);
 
-		irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
-				&irq_desc[gpio_irq_no]);
+		irq_stat &= ~(1 << irqoffset);
 	}
 }
 
@@ -297,7 +288,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
index 05ff2f3..93cc66f 100644
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -21,19 +21,19 @@
 /*
  *  KZM-ARM11-01 Board Control Registers on FPGA
  */
-#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
 
 /*
  * External UART for touch panel on FPGA
  */
-#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
 #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
new file mode 100644
index 0000000..da92933
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 2cbfa35..095a199 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 
 /* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
 /* PBC Board status register offset */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b63..2b2da03 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
 
 #ifndef __ASSEMBLY__
 
-enum mx31lilly_boards {
+enum mx31lite_boards {
 	MX31LITE_NOBOARD	= 0,
 	MX31LITE_DB		= 1,
 };
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index d5be6b5..36ff3ce 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -25,6 +25,8 @@ enum mx31moboard_boards {
 	MX31NOBOARD	= 0,
 	MX31DEVBOARD	= 1,
 	MX31MARXBOT	= 2,
+	MX31SMARTBOT	= 3,
+	MX31EYEBOT	= 4,
 };
 
 /*
@@ -34,6 +36,7 @@ enum mx31moboard_boards {
 
 extern void mx31moboard_devboard_init(void);
 extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(int board);
 
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
deleted file mode 100644
index 2bbd6ed..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 43a82d0..753a598 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,13 +26,6 @@
 struct module;
 
 struct clk {
-#ifndef CONFIG_COMMON_CLKDEV
-	/* As soon as i.MX1 and i.MX31 switched to clkdev, this
-	 * block can go away */
-	struct list_head node;
-	struct module *owner;
-	const char *name;
-#endif
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b..2941472 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,22 +20,27 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mx51_map_io(void);
 extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
 extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
 extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b14..0b6e11e 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  *
  */
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/mx1.h>
@@ -44,15 +45,24 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR	MX51_UART1_BASE_ADDR
+#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		ldreq	\rx, =UART_PADDR	@ physical
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index 07be8ad..7c4870b 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -31,7 +31,13 @@
 #define DMA_MODE_WRITE		1
 #define DMA_MODE_MASK		1
 
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
 #define IMX_DMA_MEMSIZE_8	(1 << 4)
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290e..aeb0869 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -18,11 +18,16 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	ldr	\base, =avic_base
 	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	ldr	\base, =tzic_base
+	ldr	\base, [\base]
+#endif /* CONFIG_MXC_TZIC */
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
 	@ and returns its number in irqnr
 	@ and returns if an interrupt occured in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
 	@ Load offset & priority of the highest priority
 	@ interrupt pending from AVIC_NIVECSR
 	ldr	\irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
 	strne	\tmp, [\base, #AVIC_NIMASK]
 	streq	r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+	@ Load offset & priority of the highest priority
+	@ interrupt pending.
+	@ 0xD80 is HIPND0 register
+	mov     \irqnr, #0
+	mov     \irqstat, #0x0D80
+1000:
+	ldr     \tmp,   [\irqstat, \base]
+	cmp     \tmp, #0
+	bne     1001f
+	addeq   \irqnr, \irqnr, #32
+	addeq   \irqstat, \irqstat, #4
+	cmp     \irqnr, #128
+	blo     1000b
+	b       2001f
+1001:	mov     \irqstat, #1
+1002:	tst     \tmp, \irqstat
+	bne     2002f
+	movs    \tmp, \tmp, lsr #1
+	addne   \irqnr, \irqnr, #1
+	bne     1002b
+2001:
+	mov  \irqnr, #0
+2002:
+	movs \irqnr, \irqnr
+#endif
 	.endm
 
 	@ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db754..ebadf4a 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,15 @@
 
 #include <asm/sizes.h>
 
+#define IMX_IO_ADDRESS(addr, module)					\
+	((void __force __iomem *)					\
+	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
index bf23305..6b1507c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -1,166 +1,155 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX1_H__
+#define __MACH_IOMUX_MX1_H__
 
-#ifndef _MXC_IOMUX_MX1_H
-#define _MXC_IOMUX_MX1_H
+#include <mach/iomux-v1.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
+#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
 
-/* FIXME: This list is not completed. The correct directions are
-* missing on some (many) pins
-*/
-
-
-/* Primary GPIO pin functions */
-
-#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
-
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
index 63aaa97..1495dfd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -1,126 +1,122 @@
 /*
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX21_H
-#define _MXC_IOMUX_MX21_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX21_H__
+#define __MACH_IOMUX_MX21_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+#define PB22_PF_USBH1_BYP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA	(GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL	(GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON	(GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS	(GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE	(GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM	(GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP	(GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM	(GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP	(GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS		(GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD		(GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD		(GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK		(GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2		(GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1		(GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0		(GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2		(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES		(GPIO_PORTF | GPIO_PF | 16)
 
 /* Alternate GPIO pin functions */
 
-#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+#define PA5_AF_BMI_CLK_CS	(GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0		(GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1		(GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2		(GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3		(GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4		(GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5		(GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6		(GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7		(GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8		(GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9		(GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10		(GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11		(GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12		(GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13		(GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14		(GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15		(GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ	(GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE	(GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL	(GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ	(GPIO_PORTA | GPIO_AF | 30)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+#define PC14_AIN_SYS_CLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD		(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+#define PC14_BIN_SYS_CLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
 
 /* CIN GPIO pin functions */
 
-#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+#define PB26_CIN_USBH1_RXDAT	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
 
 /* AOUT GPIO pin functions */
 
-#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-
-#endif
+#define PA29_AOUT_BMI_WAIT	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD		(GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 9af494f..f39220d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -7,7 +7,7 @@
  *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
  * and
  * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -16,24 +16,11 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
+#ifndef __MACH_IOMUX_MX25_H__
+#define __MACH_IOMUX_MX25_H__
 
 #include <mach/iomux-v3.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
-/*
- *
- * @brief MX25 I/O Pin List
- *
- * @ingroup GPIO_MX25
- */
-
-#ifndef __ASSEMBLY__
-
 /*
  * IOMUX/PAD Bit field definitions
  */
@@ -462,9 +449,11 @@
 #define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16		IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17		IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
@@ -513,5 +502,4 @@
 #define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
 
-#endif // __ASSEMBLY__
-#endif // __IOMUX_MX25_H__
+#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
index 5ac158b..d9f9a6e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -1,207 +1,205 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX27_H
-#define _MXC_IOMUX_MX27_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX27_H__
+#define __MACH_IOMUX_MX27_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
-#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
-#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PD0_PF_SD3_CMD		(GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK		(GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0	(GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1	(GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2	(GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3	(GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4	(GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5	(GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6	(GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7	(GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8	(GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9	(GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10	(GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11	(GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12	(GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13	(GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14	(GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE		(GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE		(GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW		(GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16	(GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST		(GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2		(GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1		(GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2		(GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1		(GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON	(GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY	(GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT		(GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2		(GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1		(GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15	(GPIO_PORTF | GPIO_PF | 23)
 
 /* Alternate GPIO pin functions */
 
-#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
-#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
-#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+#define PB4_AF_MSHC_DATA0	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS		(GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO		(GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT	(GPIO_PORTC | GPIO_AF | 24)
+#define PC25_AF_GPT5_TIN	(GPIO_PORTC | GPIO_AF | 25)
+#define PC26_AF_GPT4_TOUT	(GPIO_PORTC | GPIO_AF | 26)
+#define PC27_AF_GPT4_TIN	(GPIO_PORTC | GPIO_AF | 27)
+#define PD1_AF_ETMTRACE_PKT15	(GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14	(GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13	(GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12	(GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0		(GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1		(GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2		(GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3		(GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11	(GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10	(GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9	(GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8	(GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7	(GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6	(GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5	(GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0	(GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2	(GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11	(GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN	(GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY	(GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ	(GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET	(GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK	(GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ	(GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0		(GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1		(GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC	(GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2		(GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0		(GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1		(GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW	(GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR	(GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK	(GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4	(GPIO_PORTF | GPIO_AF | 23)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+#define PC14_AIN_SSI1_MCLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PC14_BIN_SSI2_MCLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
 
 /* CIN GPIO pin functions */
 
-#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+#define PD2_CIN_SLCDC1_DAT0	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT	(GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
 /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
 
 /* AOUT GPIO pin functions */
 
-#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
+#define PC14_AOUT_GPT6_TIN	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+/* BOUT GPIO pin functions */
+
+#define PC17_BOUT_PC_IOIS16	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index fb5ae63..c4f116d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -1,237 +1,230 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX2x_H
-#define _MXC_IOMUX_MX2x_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX2x_H__
+#define __MACH_IOMUX_MX2x_H__
 
 /* Primary GPIO pin functions */
 
-#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
-#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC		(GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE	(GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT		(GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN		(GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO		(GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT	(GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB		(GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP		(GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE		(GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE		(GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE		(GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO		(GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4		(GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5		(GPIO_PORTF | GPIO_PF | 22)
 
 /* Alternate GPIO pin functions */
 
-#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0	(GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS	(GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS	(GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK	(GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5	(GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7		(GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE		(GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
 
 /* AIN GPIO pin functions */
 
-#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+#define PA6_AIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT	(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+#define PE5_BIN_TOUT2		(GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
 
 /* CIN GPIO pin functions */
 
-#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+#define PA14_CIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3		(GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
 
 /* AOUT GPIO pin functions */
 
-#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PB29_AOUT_UART4_RXD	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
 #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
+#define PC15_AOUT_WKGD		(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
 
-#endif
+#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index e1fc6da..cbaed29 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -16,12 +16,10 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
+#ifndef __MACH_IOMUX_MX3_H__
+#define __MACH_IOMUX_MX3_H__
 
 #include <linux/types.h>
-
 /*
  * various IOMUX output functions
  */
@@ -34,7 +32,7 @@
 #define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
 #define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
 #define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_NONE  0		/* not configured for input */
 #define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
 #define	IOMUX_ICONFIG_FUNC  2		/* used as function */
 #define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
@@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode);
 	MXC_GPIO_IRQ_START)
 
 /*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
-/*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
  * value is constructed based on the rules described above.
@@ -633,40 +626,40 @@ enum iomux_pins {
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0	IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1	IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2	IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3	IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4	IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5	IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6	IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7	IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK		IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR		IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT		IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP		IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM		IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP		IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB		IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK		IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR		IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT		IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP		IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
@@ -711,8 +704,8 @@ enum iomux_pins {
 #define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21	IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22	IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
@@ -726,14 +719,32 @@ enum iomux_pins {
 #define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW0_KEY_ROW0	IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW1_KEY_ROW1	IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW2_KEY_ROW2	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW3_KEY_ROW3	IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW4_KEY_ROW4	IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW5_KEY_ROW5	IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW6_KEY_ROW6	IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW7_KEY_ROW7	IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL0_KEY_COL0	IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL1_KEY_COL1	IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL2_KEY_COL2	IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL3_KEY_COL3	IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL4_KEY_COL4	IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL5_KEY_COL5	IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL6_KEY_COL6	IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL7_KEY_COL7	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
 
-/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
- * cspi1_ss1*/
+
+/*
+ * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
+ * cspi2_ss1, cspi1_ss0 cspi1_ss1
+ */
 
 /*
  * This function configures the pad value for a IOMUX pin.
  */
 void mxc_iomux_set_pad(enum iomux_pins, u32);
 
-#endif
-
+#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1..2a24bae 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 0000000..ab0f95d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+	IOMUX_CONFIG_ALT0,
+	IOMUX_CONFIG_ALT1,
+	IOMUX_CONFIG_ALT2,
+	IOMUX_CONFIG_ALT3,
+	IOMUX_CONFIG_ALT4,
+	IOMUX_CONFIG_ALT5,
+	IOMUX_CONFIG_ALT6,
+	IOMUX_CONFIG_ALT7,
+	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+				PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+				PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_GPIO_PAD_CTRL		(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
+				PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/*						PAD      MUX   ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO_2_5	IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK	IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO_1_27	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT	IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
new file mode 100644
index 0000000..884f575
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_V1_H__
+#define __MACH_IOMUX_V1_H__
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define MXC_DDIR(x)	(0x00 + ((x) << 8))
+#define MXC_OCR1(x)	(0x04 + ((x) << 8))
+#define MXC_OCR2(x)	(0x08 + ((x) << 8))
+#define MXC_ICONFA1(x)	(0x0c + ((x) << 8))
+#define MXC_ICONFA2(x)	(0x10 + ((x) << 8))
+#define MXC_ICONFB1(x)	(0x14 + ((x) << 8))
+#define MXC_ICONFB2(x)	(0x18 + ((x) << 8))
+#define MXC_DR(x)	(0x1c + ((x) << 8))
+#define MXC_GIUS(x)	(0x20 + ((x) << 8))
+#define MXC_SSR(x)	(0x24 + ((x) << 8))
+#define MXC_ICR1(x)	(0x28 + ((x) << 8))
+#define MXC_ICR2(x)	(0x2c + ((x) << 8))
+#define MXC_IMR(x)	(0x30 + ((x) << 8))
+#define MXC_ISR(x)	(0x34 + ((x) << 8))
+#define MXC_GPR(x)	(0x38 + ((x) << 8))
+#define MXC_SWR(x)	(0x3c + ((x) << 8))
+#define MXC_PUEN(x)	(0x40 + ((x) << 8))
+
+#define MX1_NUM_GPIO_PORT	4
+#define MX21_NUM_GPIO_PORT	6
+#define MX27_NUM_GPIO_PORT	6
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT	(1 << 8)
+#define GPIO_IN		(0 << 8)
+#define GPIO_PUEN	(1 << 9)
+
+#define GPIO_PF		(1 << 10)
+#define GPIO_AF		(1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT	14
+#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT	16
+#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
+
+extern int mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda01..f2f73d3 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@ struct pad_desc {
 
 #define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DSE_STANDARD		(0 << 1)
-#define PAD_CTL_DSE_HIGH		(1 << 1)
-#define PAD_CTL_DSE_MAX			(2 << 1)
+#define PAD_CTL_DSE_LOW			(0 << 1)
+#define PAD_CTL_DSE_MED			(1 << 1)
+#define PAD_CTL_DSE_HIGH		(2 << 1)
+#define PAD_CTL_DSE_MAX			(3 << 1)
 
 #define PAD_CTL_SRE_FAST		(1 << 0)
+#define PAD_CTL_SRE_SLOW		(0 << 0)
 
 /*
  * setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 011cfcd..3d226d7 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -1,102 +1,14 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_H
-#define _MXC_IOMUX_H
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-#ifdef CONFIG_ARCH_MX25
-# define GPIO_PORT_MAX  3
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+ * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
 
+/* This file will go away, please include mach/iomux-mx... directly */
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/iomux-mx1.h>
@@ -110,25 +22,5 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
-#ifdef CONFIG_ARCH_MX25
-#include <mach/iomux-mx25.h>
-#endif
 
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
-
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-	const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-#endif
+#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..86781f7 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,22 +12,29 @@
 #define __ASM_ARCH_MXC_IRQS_H__
 
 /*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
  */
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS	128
+#else
 #define MXC_INTERNAL_IRQS	64
+#endif
 
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
-#if defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX2
+/* these are ordered by size to support multi-SoC kernels */
+#if defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS		(32 * 3)
 #endif
 
 /*
@@ -37,7 +44,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS	16
+#endif
 
 #define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
@@ -46,6 +58,7 @@
 #else
 #define MX3_IPU_IRQS 0
 #endif
+/* REVISIT: Add IPU irqs on IMX51 */
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafd..c4b40c3 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,37 +11,45 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#if defined CONFIG_ARCH_MX1
-#define PHYS_OFFSET		UL(0x08000000)
-#elif defined CONFIG_ARCH_MX2
-#ifdef CONFIG_MACH_MX21
-#define PHYS_OFFSET		UL(0xC0000000)
-#endif
-#ifdef CONFIG_MACH_MX27
-#define PHYS_OFFSET		UL(0xA0000000)
-#endif
-#elif defined CONFIG_ARCH_MX3
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MX25
-#define PHYS_OFFSET		UL(0x80000000)
-#elif defined CONFIG_ARCH_MXC91231
-#define PHYS_OFFSET		UL(0x90000000)
+#define MX1_PHYS_OFFSET		UL(0x08000000)
+#define MX21_PHYS_OFFSET	UL(0xc0000000)
+#define MX25_PHYS_OFFSET	UL(0x80000000)
+#define MX27_PHYS_OFFSET	UL(0xa0000000)
+#define MX3x_PHYS_OFFSET	UL(0x80000000)
+#define MX51_PHYS_OFFSET	UL(0x90000000)
+#define MXC91231_PHYS_OFFSET	UL(0x90000000)
+
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
+# if defined CONFIG_ARCH_MX1
+#  define PHYS_OFFSET		MX1_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX21
+#  define PHYS_OFFSET		MX21_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX25
+#  define PHYS_OFFSET		MX25_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX27
+#  define PHYS_OFFSET		MX27_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX3
+#  define PHYS_OFFSET		MX3x_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MXC91231
+#  define PHYS_OFFSET		MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+#  define PHYS_OFFSET		MX51_PHYS_OFFSET
+# endif
 #endif
 
-#if defined(CONFIG_MX1_VIDEO)
+#if defined(CONFIG_MX3_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_8M
 
-#if defined(CONFIG_MX3_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
+ * This is required for i.MX camera driver to capture at least four VGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_8M
-#endif /* CONFIG_MX3_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_4M
+#endif /* CONFIG_MX1_VIDEO */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
deleted file mode 100644
index 1ab1bba..0000000
--- a/arch/arm/plat-mxc/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mxc_timer.h>
-
-#ifndef __ARCH_IMX_MTD_XIP_H__
-#define __ARCH_IMX_MTD_XIP_H__
-
-#ifdef CONFIG_ARCH_MX1
-/* AITC registers */
-#define AITC_BASE	IO_ADDRESS(AVIC_BASE_ADDR)
-#define NIPNDH		(AITC_BASE + 0x58)
-#define NIPNDL		(AITC_BASE + 0x5C)
-#define INTENABLEH	(AITC_BASE + 0x10)
-#define INTENABLEL	(AITC_BASE + 0x14)
-/* MTD macros */
-#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
-			|| (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
-#define xip_currtime()		(__raw_readl(TIMER_BASE + MXC_TCN))
-#define xip_elapsed_since(x)	(signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
-#define xip_cpu_idle()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
-#endif /* CONFIG_ARCH_MX1 */
-
-#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1b2890a..5eba7e6 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -9,156 +9,289 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
 
 #include <mach/vmalloc.h>
 
 /*
  * Memory map
  */
-#define IMX_IO_PHYS	0x00200000
-#define IMX_IO_SIZE	0x00100000
-#define IMX_IO_BASE	VMALLOC_END
+#define MX1_IO_BASE_ADDR	0x00200000
+#define MX1_IO_SIZE		SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT	VMALLOC_END
 
-#define IMX_CS0_PHYS	0x10000000
-#define IMX_CS0_SIZE	0x02000000
+#define MX1_CS0_PHYS		0x10000000
+#define MX1_CS0_SIZE		0x02000000
 
-#define IMX_CS1_PHYS	0x12000000
-#define IMX_CS1_SIZE	0x01000000
+#define MX1_CS1_PHYS		0x12000000
+#define MX1_CS1_SIZE		0x01000000
 
-#define IMX_CS2_PHYS	0x13000000
-#define IMX_CS2_SIZE	0x01000000
+#define MX1_CS2_PHYS		0x13000000
+#define MX1_CS2_SIZE		0x01000000
 
-#define IMX_CS3_PHYS	0x14000000
-#define IMX_CS3_SIZE	0x01000000
+#define MX1_CS3_PHYS		0x14000000
+#define MX1_CS3_SIZE		0x01000000
 
-#define IMX_CS4_PHYS	0x15000000
-#define IMX_CS4_SIZE	0x01000000
+#define MX1_CS4_PHYS		0x15000000
+#define MX1_CS4_SIZE		0x01000000
 
-#define IMX_CS5_PHYS	0x16000000
-#define IMX_CS5_SIZE	0x01000000
+#define MX1_CS5_PHYS		0x16000000
+#define MX1_CS5_SIZE		0x01000000
 
 /*
  *  Register BASEs, based on OFFSETs
  */
-#define AIPI1_BASE_ADDR		(0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR		(0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR		(0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR		(0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR		(0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR		(0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR		(0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR		(0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR		(0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR		(0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR		(0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR		(0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR		(0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR		(0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR		(0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR		(0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR		(0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR		(0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR		(0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR		(0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR		(0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR		(0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR		(0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR		(0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR		(0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR	(0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR		(0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR		(0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR		(0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)	((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x)	IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX1_IO))
 
 /* fixed interrput numbers */
-#define INT_SOFTINT		0
-#define CSI_INT			6
-#define DSPA_MAC_INT		7
-#define DSPA_INT		8
-#define COMP_INT		9
-#define MSHC_XINT		10
-#define GPIO_INT_PORTA		11
-#define GPIO_INT_PORTB		12
-#define GPIO_INT_PORTC		13
-#define LCDC_INT		14
-#define SIM_INT			15
-#define SIM_DATA_INT		16
-#define RTC_INT			17
-#define RTC_SAMINT		18
-#define UART2_MINT_PFERR	19
-#define UART2_MINT_RTS		20
-#define UART2_MINT_DTR		21
-#define UART2_MINT_UARTC	22
-#define UART2_MINT_TX		23
-#define UART2_MINT_RX		24
-#define UART1_MINT_PFERR	25
-#define UART1_MINT_RTS		26
-#define UART1_MINT_DTR		27
-#define UART1_MINT_UARTC	28
-#define UART1_MINT_TX		29
-#define UART1_MINT_RX		30
-#define VOICE_DAC_INT		31
-#define VOICE_ADC_INT		32
-#define PEN_DATA_INT		33
-#define PWM_INT			34
-#define SDHC_INT		35
-#define I2C_INT			39
-#define CSPI_INT		41
-#define SSI_TX_INT		42
-#define SSI_TX_ERR_INT		43
-#define SSI_RX_INT		44
-#define SSI_RX_ERR_INT		45
-#define TOUCH_INT		46
-#define USBD_INT0		47
-#define USBD_INT1		48
-#define USBD_INT2		49
-#define USBD_INT3		50
-#define USBD_INT4		51
-#define USBD_INT5		52
-#define USBD_INT6		53
-#define BTSYS_INT		55
-#define BTTIM_INT		56
-#define BTWUI_INT		57
-#define TIM2_INT		58
-#define TIM1_INT		59
-#define DMA_ERR			60
-#define DMA_INT			61
-#define GPIO_INT_PORTD		62
-#define WDT_INT			63
+#define MX1_INT_SOFTINT		0
+#define MX1_CSI_INT		6
+#define MX1_DSPA_MAC_INT	7
+#define MX1_DSPA_INT		8
+#define MX1_COMP_INT		9
+#define MX1_MSHC_XINT		10
+#define MX1_GPIO_INT_PORTA	11
+#define MX1_GPIO_INT_PORTB	12
+#define MX1_GPIO_INT_PORTC	13
+#define MX1_LCDC_INT		14
+#define MX1_SIM_INT		15
+#define MX1_SIM_DATA_INT	16
+#define MX1_RTC_INT		17
+#define MX1_RTC_SAMINT		18
+#define MX1_UART2_MINT_PFERR	19
+#define MX1_UART2_MINT_RTS	20
+#define MX1_UART2_MINT_DTR	21
+#define MX1_UART2_MINT_UARTC	22
+#define MX1_UART2_MINT_TX	23
+#define MX1_UART2_MINT_RX	24
+#define MX1_UART1_MINT_PFERR	25
+#define MX1_UART1_MINT_RTS	26
+#define MX1_UART1_MINT_DTR	27
+#define MX1_UART1_MINT_UARTC	28
+#define MX1_UART1_MINT_TX	29
+#define MX1_UART1_MINT_RX	30
+#define MX1_VOICE_DAC_INT	31
+#define MX1_VOICE_ADC_INT	32
+#define MX1_PEN_DATA_INT	33
+#define MX1_PWM_INT		34
+#define MX1_SDHC_INT		35
+#define MX1_I2C_INT		39
+#define MX1_CSPI_INT		41
+#define MX1_SSI_TX_INT		42
+#define MX1_SSI_TX_ERR_INT	43
+#define MX1_SSI_RX_INT		44
+#define MX1_SSI_RX_ERR_INT	45
+#define MX1_TOUCH_INT		46
+#define MX1_USBD_INT0		47
+#define MX1_USBD_INT1		48
+#define MX1_USBD_INT2		49
+#define MX1_USBD_INT3		50
+#define MX1_USBD_INT4		51
+#define MX1_USBD_INT5		52
+#define MX1_USBD_INT6		53
+#define MX1_BTSYS_INT		55
+#define MX1_BTTIM_INT		56
+#define MX1_BTWUI_INT		57
+#define MX1_TIM2_INT		58
+#define MX1_TIM1_INT		59
+#define MX1_DMA_ERR		60
+#define MX1_DMA_INT		61
+#define MX1_GPIO_INT_PORTD	62
+#define MX1_WDT_INT		63
 
 /* DMA */
-#define DMA_REQ_UART3_T		2
-#define DMA_REQ_UART3_R		3
-#define DMA_REQ_SSI2_T		4
-#define DMA_REQ_SSI2_R		5
-#define DMA_REQ_CSI_STAT	6
-#define DMA_REQ_CSI_R		7
-#define DMA_REQ_MSHC		8
-#define DMA_REQ_DSPA_DCT_DOUT	9
-#define DMA_REQ_DSPA_DCT_DIN	10
-#define DMA_REQ_DSPA_MAC	11
-#define DMA_REQ_EXT		12
-#define DMA_REQ_SDHC		13
-#define DMA_REQ_SPI1_R		14
-#define DMA_REQ_SPI1_T		15
-#define DMA_REQ_SSI_T		16
-#define DMA_REQ_SSI_R		17
-#define DMA_REQ_ASP_DAC		18
-#define DMA_REQ_ASP_ADC		19
-#define DMA_REQ_USP_EP(x)	(20 + (x))
-#define DMA_REQ_SPI2_R		26
-#define DMA_REQ_SPI2_T		27
-#define DMA_REQ_UART2_T		28
-#define DMA_REQ_UART2_R		29
-#define DMA_REQ_UART1_T		30
-#define DMA_REQ_UART1_R		31
-
-#endif /*  __ASM_ARCH_MXC_MX1_H__ */
+#define MX1_DMA_REQ_UART3_T		2
+#define MX1_DMA_REQ_UART3_R		3
+#define MX1_DMA_REQ_SSI2_T		4
+#define MX1_DMA_REQ_SSI2_R		5
+#define MX1_DMA_REQ_CSI_STAT		6
+#define MX1_DMA_REQ_CSI_R		7
+#define MX1_DMA_REQ_MSHC		8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
+#define MX1_DMA_REQ_DSPA_DCT_DIN	10
+#define MX1_DMA_REQ_DSPA_MAC		11
+#define MX1_DMA_REQ_EXT			12
+#define MX1_DMA_REQ_SDHC		13
+#define MX1_DMA_REQ_SPI1_R		14
+#define MX1_DMA_REQ_SPI1_T		15
+#define MX1_DMA_REQ_SSI_T		16
+#define MX1_DMA_REQ_SSI_R		17
+#define MX1_DMA_REQ_ASP_DAC		18
+#define MX1_DMA_REQ_ASP_ADC		19
+#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
+#define MX1_DMA_REQ_SPI2_R		26
+#define MX1_DMA_REQ_SPI2_T		27
+#define MX1_DMA_REQ_UART2_T		28
+#define MX1_DMA_REQ_UART2_R		29
+#define MX1_DMA_REQ_UART1_T		30
+#define MX1_DMA_REQ_UART1_R		31
+
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc.  Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0		MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
new file mode 100644
index 0000000..22d0b59
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
@@ -0,0 +1,38 @@
+/*
+ *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MX21_USBH
+#define __ASM_ARCH_MX21_USBH
+
+enum mx21_usbh_xcvr {
+	/* Values below as used by hardware (HWMODE register) */
+	MX21_USBXCVR_TXDIF_RXDIF = 0,
+	MX21_USBXCVR_TXDIF_RXSE = 1,
+	MX21_USBXCVR_TXSE_RXDIF = 2,
+	MX21_USBXCVR_TXSE_RXSE = 3,
+};
+
+struct mx21_usbh_platform_data {
+	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
+	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+	u16 	enable_host1:1,
+		enable_host2:1,
+		enable_otg_host:1, /* enable "OTG" port (as host) */
+		host1_xcverless:1, /* traceiverless host1 port */
+		host1_txenoe:1, /* output enable host1 transmit enable */
+		otg_ext_xcvr:1, /* external tranceiver for OTG port */
+		unused:10;
+};
+
+#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index bb297d8..ed98b9c 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -22,8 +22,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR		0x10000000
 #define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -92,6 +92,11 @@
 
 #define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
+#define MX21_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX21_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX21_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3		6
 #define MX21_INT_GPIO		8
@@ -179,6 +184,7 @@
 #define MX21_DMA_REQ_CSI_STAT	30
 #define MX21_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
 #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
 #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
 #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
 #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 854e2dc..4eb6e33 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -22,27 +22,27 @@
 #define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
 #define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
 
-#define MX25_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x)  \
-	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+#define MX25_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX25_AIPS1) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AVIC))
 
-#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x)					\
-	(void __force __iomem *)				\
-	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
-	0xDEADBEEF)
-
-#define UART1_BASE_ADDR			0x43f90000
-#define UART2_BASE_ADDR			0x43f94000
+#define MX25_UART1_BASE_ADDR		0x43f90000
+#define MX25_UART2_BASE_ADDR		0x43f94000
 
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_NFC_BASE_ADDR		0xbb000000
+#define MX25_DRYICE_BASE_ADDR		0x53ffc000
+#define MX25_LCDC_BASE_ADDR		0x53fbc000
 
+#define MX25_INT_DRYICE	25
 #define MX25_INT_FEC	57
+#define MX25_INT_NANDFC	33
+#define MX25_INT_LCDC	39
+
+#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
+#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
+#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
+#endif
 
-#endif /* __MACH_MX25_H__ */
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index e2ae19f..bae9cd7 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -21,8 +21,12 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
 
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -109,11 +113,31 @@
 #define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
 
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
+#define MX27_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX27_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2
@@ -225,6 +249,7 @@
 extern int mx27_revision(void);
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
 #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@ extern int mx27_revision(void);
 #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
 #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
 #define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index f2eaf14..afb895a 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -20,8 +20,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
@@ -176,6 +176,7 @@
 #define MX2x_DMA_REQ_CSI_STAT	30
 #define MX2x_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
 #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
 #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
 #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
 #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index b8b47d1..fb90e11 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -107,8 +114,30 @@
 #define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX31_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX31_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5
@@ -186,6 +215,7 @@
 #define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
 #define MX31_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
 #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
 #define MXC_INT_UART5 MX31_INT_UART5
 #define MXC_INT_CCM MX31_INT_CCM
 #define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af871bc..526a558 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
 /*
  * IRAM
  */
@@ -104,6 +106,13 @@
 #define MX35_NFC_BASE_ADDR		0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX35_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX35_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX35_SPBA0))
+
 /*
  * Interrupt numbers
  */
@@ -180,6 +189,7 @@
 #define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
 #define MXC_INT_MLB MX35_INT_MLB
 #define MXC_INT_SPDIF MX35_INT_SPDIF
 #define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index be69272..7a356de3 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
 
 /*
  * MX31 memory map:
@@ -269,6 +269,7 @@ static inline int mx31_revision(void)
 }
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@ static inline int mx31_revision(void)
 #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
 #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 0000000..5aad344
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,445 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * FA3E0000	1FFE0000	128K	IRAM (SCCv2 RAM)
+ *         	30000000	256M	GPU
+ *         	40000000	512M	IPU
+ * FA200000	60000000	1M	DEBUG
+ * FB100000	70000000	1M	SPBA 0
+ * FB000000	73F00000	1M	AIPS 1
+ * FB200000	83F00000	1M	AIPS 2
+ *		8FFFC000	16K	TZIC (interrupt controller)
+ *         	90000000	256M	CSD0 SDRAM/DDR
+ *         	A0000000	256M	CSD1 SDRAM/DDR
+ *         	B0000000	128M	CS0 Flash
+ *         	B8000000	128M	CS1 Flash
+ *         	C0000000	128M	CS2 Flash
+ *         	C8000000	64M	CS3 Flash
+ *         	CC000000	32M	CS4 SRAM
+ *         	CE000000	32M	CS5 SRAM
+ *		CFFF0000	64K	NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IROM
+ */
+#define MX51_IROM_BASE_ADDR		0x0
+#define MX51_IROM_SIZE			SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT	0xFA3E0000
+#define MX51_IRAM_PARTITIONS		16
+#define MX51_IRAM_PARTITIONS_TO1	12
+#define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
+#define MX51_NFC_AXI_SIZE		SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR		0x20000000
+#define MX51_GPU2D_BASE_ADDR		0xD0000000
+
+#define MX51_TZIC_BASE_ADDR_TO1		0x8FFFC000
+#define MX51_TZIC_BASE_ADDR		0xE0000000
+
+#define MX51_DEBUG_BASE_ADDR		0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
+#define MX51_DEBUG_SIZE			SZ_1M
+#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 		0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT	0xFB100000
+#define MX51_SPBA0_SIZE			SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1	0x04
+#define MX51_SPBA_SDHC2	0x08
+#define MX51_SPBA_UART3	0x0C
+#define MX51_SPBA_CSPI1	0x10
+#define MX51_SPBA_SSI2	0x14
+#define MX51_SPBA_SDHC3	0x20
+#define MX51_SPBA_SDHC4	0x24
+#define MX51_SPBA_SPDIF	0x28
+#define MX51_SPBA_ATA	0x30
+#define MX51_SPBA_SLIM	0x34
+#define MX51_SPBA_HSI2C	0x38
+#define MX51_SPBA_CTRL	0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 	0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT	0xFB000000
+#define MX51_AIPS1_SIZE		SZ_1M
+
+#define MX51_OTG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM	30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	(MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#endif				/*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR		0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT	0xFB200000
+#define MX51_AIPS2_SIZE			SZ_1M
+
+#define MX51_PLL1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR 	(MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
+#define MX51_CSD0_BASE_ADDR		0x90000000
+#define MX51_CSD1_BASE_ADDR		0xA0000000
+#define MX51_CS0_BASE_ADDR		0xB0000000
+#define MX51_CS1_BASE_ADDR		0xB8000000
+#define MX51_CS2_BASE_ADDR		0xC0000000
+#define MX51_CS3_BASE_ADDR		0xC8000000
+#define MX51_CS4_BASE_ADDR		0xCC000000
+#define MX51_CS5_BASE_ADDR		0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size)			\
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module)			       \
+	ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+				MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x)					\
+	(void __iomem *)					\
+	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
+	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x)  \
+	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x)  \
+	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1	47
+#define MX51_DMA_REQ_SSI3_RX1	46
+#define MX51_DMA_REQ_SPDIF	45
+#define MX51_DMA_REQ_UART3_TX	44
+#define MX51_DMA_REQ_UART3_RX	43
+#define MX51_DMA_REQ_SLIM_B_TX	42
+#define MX51_DMA_REQ_SDHC4	41
+#define MX51_DMA_REQ_SDHC3	40
+#define MX51_DMA_REQ_CSPI_TX	39
+#define MX51_DMA_REQ_CSPI_RX	38
+#define MX51_DMA_REQ_SSI3_TX2	37
+#define MX51_DMA_REQ_IPU	36
+#define MX51_DMA_REQ_SSI3_RX2	35
+#define MX51_DMA_REQ_EPIT2	34
+#define MX51_DMA_REQ_CTI2_1	33
+#define MX51_DMA_REQ_EMI_WR	32
+#define MX51_DMA_REQ_CTI2_0	31
+#define MX51_DMA_REQ_EMI_RD	30
+#define MX51_DMA_REQ_SSI1_TX1	29
+#define MX51_DMA_REQ_SSI1_RX1	28
+#define MX51_DMA_REQ_SSI1_TX2	27
+#define MX51_DMA_REQ_SSI1_RX2	26
+#define MX51_DMA_REQ_SSI2_TX1	25
+#define MX51_DMA_REQ_SSI2_RX1	24
+#define MX51_DMA_REQ_SSI2_TX2	23
+#define MX51_DMA_REQ_SSI2_RX2	22
+#define MX51_DMA_REQ_SDHC2	21
+#define MX51_DMA_REQ_SDHC1	20
+#define MX51_DMA_REQ_UART1_TX	19
+#define MX51_DMA_REQ_UART1_RX	18
+#define MX51_DMA_REQ_UART2_TX	17
+#define MX51_DMA_REQ_UART2_RX	16
+#define MX51_DMA_REQ_GPU	15
+#define MX51_DMA_REQ_EXTREQ1	14
+#define MX51_DMA_REQ_FIRI_TX	13
+#define MX51_DMA_REQ_FIRI_RX	12
+#define MX51_DMA_REQ_HS_I2C_RX	11
+#define MX51_DMA_REQ_HS_I2C_TX	10
+#define MX51_DMA_REQ_CSPI2_TX	9
+#define MX51_DMA_REQ_CSPI2_RX	8
+#define MX51_DMA_REQ_CSPI1_TX	7
+#define MX51_DMA_REQ_CSPI1_RX	6
+#define MX51_DMA_REQ_SLIM_B	5
+#define MX51_DMA_REQ_ATA_TX_END	4
+#define MX51_DMA_REQ_ATA_TX	3
+#define MX51_DMA_REQ_ATA_RX	2
+#define MX51_DMA_REQ_GPC	1
+#define MX51_DMA_REQ_VPU	0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE	0
+#define MX51_MXC_INT_RESV0	0
+#define MX51_MXC_INT_MMC_SDHC1	1
+#define MX51_MXC_INT_MMC_SDHC2	2
+#define MX51_MXC_INT_MMC_SDHC3	3
+#define MX51_MXC_INT_MMC_SDHC4	4
+#define MX51_MXC_INT_RESV5	5
+#define MX51_MXC_INT_SDMA	6
+#define MX51_MXC_INT_IOMUX	7
+#define MX51_MXC_INT_NFC	8
+#define MX51_MXC_INT_VPU	9
+#define MX51_MXC_INT_IPU_ERR	10
+#define MX51_MXC_INT_IPU_SYN	11
+#define MX51_MXC_INT_GPU	12
+#define MX51_MXC_INT_RESV13	13
+#define MX51_MXC_INT_USB_H1	14
+#define MX51_MXC_INT_EMI	15
+#define MX51_MXC_INT_USB_H2	16
+#define MX51_MXC_INT_USB_H3	17
+#define MX51_MXC_INT_USB_OTG	18
+#define MX51_MXC_INT_SAHARA_H0	19
+#define MX51_MXC_INT_SAHARA_H1	20
+#define MX51_MXC_INT_SCC_SMN	21
+#define MX51_MXC_INT_SCC_STZ	22
+#define MX51_MXC_INT_SCC_SCM	23
+#define MX51_MXC_INT_SRTC_NTZ	24
+#define MX51_MXC_INT_SRTC_TZ	25
+#define MX51_MXC_INT_RTIC	26
+#define MX51_MXC_INT_CSU	27
+#define MX51_MXC_INT_SLIM_B	28
+#define MX51_MXC_INT_SSI1	29
+#define MX51_MXC_INT_SSI2	30
+#define MX51_MXC_INT_UART1	31
+#define MX51_MXC_INT_UART2	32
+#define MX51_MXC_INT_UART3	33
+#define MX51_MXC_INT_RESV34	34
+#define MX51_MXC_INT_RESV35	35
+#define MX51_MXC_INT_CSPI1	36
+#define MX51_MXC_INT_CSPI2	37
+#define MX51_MXC_INT_CSPI	38
+#define MX51_MXC_INT_GPT	39
+#define MX51_MXC_INT_EPIT1	40
+#define MX51_MXC_INT_EPIT2	41
+#define MX51_MXC_INT_GPIO1_INT7	42
+#define MX51_MXC_INT_GPIO1_INT6	43
+#define MX51_MXC_INT_GPIO1_INT5	44
+#define MX51_MXC_INT_GPIO1_INT4	45
+#define MX51_MXC_INT_GPIO1_INT3	46
+#define MX51_MXC_INT_GPIO1_INT2	47
+#define MX51_MXC_INT_GPIO1_INT1	48
+#define MX51_MXC_INT_GPIO1_INT0	49
+#define MX51_MXC_INT_GPIO1_LOW	50
+#define MX51_MXC_INT_GPIO1_HIGH	51
+#define MX51_MXC_INT_GPIO2_LOW	52
+#define MX51_MXC_INT_GPIO2_HIGH	53
+#define MX51_MXC_INT_GPIO3_LOW	54
+#define MX51_MXC_INT_GPIO3_HIGH	55
+#define MX51_MXC_INT_GPIO4_LOW	56
+#define MX51_MXC_INT_GPIO4_HIGH	57
+#define MX51_MXC_INT_WDOG1	58
+#define MX51_MXC_INT_WDOG2	59
+#define MX51_MXC_INT_KPP	60
+#define MX51_MXC_INT_PWM1	61
+#define MX51_MXC_INT_I2C1	62
+#define MX51_MXC_INT_I2C2	63
+#define MX51_MXC_INT_HS_I2C	64
+#define MX51_MXC_INT_RESV65	65
+#define MX51_MXC_INT_RESV66	66
+#define MX51_MXC_INT_SIM_IPB	67
+#define MX51_MXC_INT_SIM_DAT	68
+#define MX51_MXC_INT_IIM	69
+#define MX51_MXC_INT_ATA	70
+#define MX51_MXC_INT_CCM1	71
+#define MX51_MXC_INT_CCM2	72
+#define MX51_MXC_INT_GPC1	73
+#define MX51_MXC_INT_GPC2	74
+#define MX51_MXC_INT_SRC	75
+#define MX51_MXC_INT_NM		76
+#define MX51_MXC_INT_PMU	77
+#define MX51_MXC_INT_CTI_IRQ	78
+#define MX51_MXC_INT_CTI1_TG0	79
+#define MX51_MXC_INT_CTI1_TG1	80
+#define MX51_MXC_INT_MCG_ERR	81
+#define MX51_MXC_INT_MCG_TMR	82
+#define MX51_MXC_INT_MCG_FUNC	83
+#define MX51_MXC_INT_GPU2_IRQ	84
+#define MX51_MXC_INT_GPU2_BUSY	85
+#define MX51_MXC_INT_RESV86	86
+#define MX51_MXC_INT_FEC	87
+#define MX51_MXC_INT_OWIRE	88
+#define MX51_MXC_INT_CTI1_TG2	89
+#define MX51_MXC_INT_SJC	90
+#define MX51_MXC_INT_SPDIF	91
+#define MX51_MXC_INT_TVE	92
+#define MX51_MXC_INT_FIRI	93
+#define MX51_MXC_INT_PWM2	94
+#define MX51_MXC_INT_SLIM_EXP	95
+#define MX51_MXC_INT_SSI3	96
+#define MX51_MXC_INT_EMI_BOOT	97
+#define MX51_MXC_INT_CTI1_TG3	98
+#define MX51_MXC_INT_SMC_RX	99
+#define MX51_MXC_INT_VPU_IDLE	100
+#define MX51_MXC_INT_EMI_NFC	101
+#define MX51_MXC_INT_GPU_IDLE	102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0	0x10
+#define MX51_CHIP_REV_1_1	0x11
+#define MX51_CHIP_REV_1_2	0x12
+#define MX51_CHIP_REV_1_3	0x13
+#define MX51_CHIP_REV_2_0	0x20
+#define MX51_CHIP_REV_2_1	0x21
+#define MX51_CHIP_REV_2_2	0x22
+#define MX51_CHIP_REV_2_3	0x23
+#define MX51_CHIP_REV_3_0	0x30
+#define MX51_CHIP_REV_3_1	0x31
+#define MX51_CHIP_REV_3_2	0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern int mx51_revision(void);
+#endif
+
+#endif	/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5199053..a790bf2 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX51		51
 #define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51()		(0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
@@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 81484d1..5182b98 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -184,60 +184,22 @@
 #define MXC91231_CS4_BASE_ADDR		0xB4000000
 #define MXC91231_CS5_BASE_ADDR		0xB6000000
 
-/* Is given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
-	(((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Is given address belongs to the specified named `module'? */
-#define MXC91231_IS_MODULE(addr, module) \
-	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
-	                        MXC91231_ ## module ## _SIZE)
 /*
  * This macro defines the physical to virtual address mapping for all the
  * peripheral modules. It is used by passing in the physical address as x
  * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MXC91231_IO_ADDRESS(x) \
-	(void __iomem *) \
-	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
-	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
-	 0xDEADBEEF)
-
-
-/*
- * define the address mapping macros: in physical address order
+ * it returns 0.
  */
-#define MXC91231_L2CC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA0_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA1_IO_ADDRESS(x)  \
-	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
-
-#define MXC91231_ROMP_IO_ADDRESS(x)  \
-	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
-
-#define MXC91231_AVIC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
 
-#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
-	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+#define MXC91231_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MXC91231_L2CC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_ROMP) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AVIC) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?:				\
+	IMX_IO_ADDRESS(x, MXC91231_AIPS2))
 
 /*
  * Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 8f79623..7fc5f99 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -22,6 +22,22 @@
 #define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
 #define MXC_EHCI_TTL_ENABLED		(1 << 6)
 
+#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
+#define MXC_EHCI_IPPUE_UP		(1 << 9)
+#define MXC_EHCI_WAKEUP_ENABLED	(1 << 10)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 11)
+
+#define MXC_USBCTRL_OFFSET		0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+
+#define MX5_USBOTHER_REGS_OFFSET	0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
+
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
@@ -31,7 +47,7 @@ struct mxc_usbh_platform_data {
 	struct otg_transceiver	*otg;
 };
 
-int mxc_set_usbcontrol(int port, unsigned int flags);
+int mxc_initialize_usb_hw(int port, unsigned int flags);
 
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 0000000..c34ded5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+	unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+	void (*ac97_reset) (struct snd_ac97 *ac97);
+	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c2..024416e 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE		8000000
 #elif defined CONFIG_ARCH_MXC91231
 #define CLOCK_TICK_RATE		13000000
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index d49384c..b6d3d0f 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,8 +1,6 @@
 /*
  *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
- *
- *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) Shane Nay (shane@minirl.com)
  *
@@ -25,7 +23,6 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static unsigned long uart_base;
@@ -69,6 +66,7 @@ static inline void flush(void)
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 #define MX3X_UART2_BASE_ADDR	0x43F94000
+#define MX51_UART1_BASE_ADDR	0x73fbc000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -104,6 +102,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MAGX_ZN5:
 		uart_base = MX3X_UART2_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX51_BABBAGE:
+		uart_base = MX51_UART1_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 62d9762..44243a2 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -21,6 +21,6 @@
 #define __ASM_ARCH_MXC_VMALLOC_H__
 
 /* vmalloc ending address */
-#define VMALLOC_END       0xF4000000
+#define VMALLOC_END       0xf4000000UL
 
 #endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
deleted file mode 100644
index a37163c..0000000
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  arch/arm/mach-mxc/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux.h>
-
-void mxc_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
-	if (gpio_mode & GPIO_PUEN)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
-
-	/* Data direction */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
-	if (gpio_mode & GPIO_OUT)
-		tmp |= 1 << pin;
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
-
-	/* Primary / alternate function */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
-	if (gpio_mode & GPIO_AF)
-		tmp |= (1 << pin);
-	else
-		tmp &= ~(1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
-
-	/* use as gpio? */
-	tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
-	if (gpio_mode & (GPIO_PF | GPIO_AF))
-		tmp &= ~(1 << pin);
-	else
-		tmp |= (1 << pin);
-	__raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
-
-	if (pin < 16) {
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
-	} else {
-		pin -= 16;
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
-
-		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
-		tmp &= ~(3 << (pin * 2));
-		tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
-	}
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		ret = gpio_request(gpio, label);
-		if (ret)
-			goto setup_error;
-
-		mxc_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_gpio_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-	const int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		gpio_free(gpio);
-		p++;
-	}
-
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
new file mode 100644
index 0000000..960a02c
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/plat-mxc/iomux-v1.c
+ *
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * Common code for i.MX1, i.MX21 and i.MX27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v1.h>
+
+static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
+
+static inline unsigned long imx_iomuxv1_readl(unsigned offset)
+{
+	return __raw_readl(imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
+{
+	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_rmwl(unsigned offset,
+		unsigned long mask, unsigned long value)
+{
+	unsigned long reg = imx_iomuxv1_readl(offset);
+
+	reg &= ~mask;
+	reg |= value;
+
+	imx_iomuxv1_writel(reg, offset);
+}
+
+static inline void imx_iomuxv1_set_puen(
+		unsigned int port, unsigned int pin, int on)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ddir(
+		unsigned int port, unsigned int pin, int out)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gpr(
+		unsigned int port, unsigned int pin, int af)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gius(
+		unsigned int port, unsigned int pin, int inuse)
+{
+	unsigned long mask = 1 << pin;
+
+	imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ocr(
+		unsigned int port, unsigned int pin, unsigned int ocr)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = ocr << shift;
+	unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfa(
+		unsigned int port, unsigned int pin, unsigned int aout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = aout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfb(
+		unsigned int port, unsigned int pin, unsigned int bout)
+{
+	unsigned long shift = (pin & 0xf) << 1;
+	unsigned long mask = 3 << shift;
+	unsigned long value = bout << shift;
+	unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
+
+	imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+int mxc_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+	unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
+	unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+
+	if (port >= imx_iomuxv1_numports)
+		return -EINVAL;
+
+	/* Pullup enable */
+	imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
+
+	/* Data direction */
+	imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
+
+	/* Primary / alternate function */
+	imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
+
+	/* use as gpio? */
+	imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
+
+	imx_iomuxv1_set_ocr(port, pin, ocr);
+
+	imx_iomuxv1_set_iconfa(port, pin, aout);
+
+	imx_iomuxv1_set_iconfb(port, pin, bout);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		ret = mxc_gpio_mode(list[i]);
+
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+		const char *label)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		ret = gpio_request(gpio, label);
+		if (ret)
+			goto err_gpio_request;
+	}
+
+	ret = imx_iomuxv1_setup_multiple(pin_list, count);
+	if (ret)
+		goto err_setup;
+
+	return 0;
+
+err_setup:
+	BUG_ON(i != count);
+
+err_gpio_request:
+	mxc_gpio_release_multiple_pins(pin_list, i);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+	size_t i;
+
+	for (i = 0; i < count; ++i) {
+		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+		gpio_free(gpio);
+	}
+}
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
+
+static int imx_iomuxv1_init(void)
+{
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1()) {
+		imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21()) {
+		imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+	} else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27()) {
+		imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+		imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+	} else
+#endif
+		return -ENODEV;
+
+	return 0;
+}
+pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 4ff6dfe..c36f263 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c
new file mode 100644
index 0000000..b5fad45
--- /dev/null
+++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c
@@ -0,0 +1,20 @@
+/*
+ * Exported ksyms for the SSI FIQ handler
+ *
+ * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+
+#include <mach/ssi.h>
+
+EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_start);
+EXPORT_SYMBOL(imx_ssi_fiq_end);
+EXPORT_SYMBOL(imx_ssi_fiq_base);
+
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S
new file mode 100644
index 0000000..4ddce56
--- /dev/null
+++ b/arch/arm/plat-mxc/ssi-fiq.S
@@ -0,0 +1,134 @@
+/*
+ *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * r8  = bit 0-15: tx offset, bit 16-31: tx buffer size
+ * r9  = bit 0-15: rx offset, bit 16-31: rx buffer size
+ */
+
+#define SSI_STX0	0x00
+#define SSI_SRX0	0x08
+#define SSI_SISR	0x14
+#define SSI_SIER	0x18
+#define SSI_SACNT	0x38
+
+#define SSI_SACNT_AC97EN	(1 << 0)
+
+#define SSI_SIER_TFE0_EN	(1 << 0)
+#define SSI_SISR_TFE0		(1 << 0)
+#define SSI_SISR_RFF0		(1 << 2)
+#define SSI_SIER_RFF0_EN	(1 << 2)
+
+		.text
+		.global	imx_ssi_fiq_start
+		.global	imx_ssi_fiq_end
+		.global imx_ssi_fiq_base
+		.global imx_ssi_fiq_rx_buffer
+		.global imx_ssi_fiq_tx_buffer
+
+imx_ssi_fiq_start:
+		ldr r12, imx_ssi_fiq_base
+
+		/* TX */
+		ldr r11, imx_ssi_fiq_tx_buffer
+
+		/* shall we send? */
+		ldr r13, [r12, #SSI_SIER]
+		tst r13, #SSI_SIER_TFE0_EN
+		beq 1f
+
+		/* TX FIFO empty? */
+		ldr r13, [r12, #SSI_SISR]
+		tst r13, #SSI_SISR_TFE0
+		beq 1f
+
+		mov r10, #0x10000
+		sub r10, #1
+		and r10, r10, r8	/* r10: current buffer offset */
+
+		add r11, r11, r10
+
+		ldrh r13, [r11]
+		strh r13, [r12, #SSI_STX0]
+
+		ldrh r13, [r11, #2]
+		strh r13, [r12, #SSI_STX0]
+
+		ldrh r13, [r11, #4]
+		strh r13, [r12, #SSI_STX0]
+
+		ldrh r13, [r11, #6]
+		strh r13, [r12, #SSI_STX0]
+
+		add r10, #8
+		lsr r13, r8, #16	/* r13: buffer size */
+		cmp r10, r13
+		lslgt r8, r13, #16
+		addle r8, #8
+1:
+		/* RX */
+
+		/* shall we receive? */
+		ldr r13, [r12, #SSI_SIER]
+		tst r13, #SSI_SIER_RFF0_EN
+		beq 1f
+
+		/* RX FIFO full? */
+		ldr r13, [r12, #SSI_SISR]
+		tst r13, #SSI_SISR_RFF0
+		beq 1f
+
+		ldr r11, imx_ssi_fiq_rx_buffer
+
+		mov r10, #0x10000
+		sub r10, #1
+		and r10, r10, r9	/* r10: current buffer offset */
+
+		add r11, r11, r10
+
+		ldr r13, [r12, #SSI_SACNT]
+		tst r13, #SSI_SACNT_AC97EN
+
+		ldr r13, [r12, #SSI_SRX0]
+		strh r13, [r11]
+
+		ldr r13, [r12, #SSI_SRX0]
+		strh r13, [r11, #2]
+
+		/* dummy read to skip slot 12 */
+		ldrne r13, [r12, #SSI_SRX0]
+
+		ldr r13, [r12, #SSI_SRX0]
+		strh r13, [r11, #4]
+
+		ldr r13, [r12, #SSI_SRX0]
+		strh r13, [r11, #6]
+
+		/* dummy read to skip slot 12 */
+		ldrne r13, [r12, #SSI_SRX0]
+
+		add r10, #8
+		lsr r13, r9, #16	/* r13: buffer size */
+		cmp r10, r13
+		lslgt r9, r13, #16
+		addle r9, #8
+
+1:
+		@ return from FIQ
+		subs	pc, lr, #4
+imx_ssi_fiq_base:
+		.word 0x0
+imx_ssi_fiq_rx_buffer:
+		.word 0x0
+imx_ssi_fiq_tx_buffer:
+		.word 0x0
+imx_ssi_fiq_end:
+
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567e..f9a1b05 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
 /* defines common for all i.MX */
 #define MXC_TCTL		0x00
-#define MXC_TCTL_TEN		(1 << 0)
+#define MXC_TCTL_TEN		(1 << 0) /* Enable module */
 #define MXC_TPRER		0x04
 
 /* MX1, MX21, MX27 */
@@ -47,15 +53,18 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN		(1 << 3)
-#define MX3_TCTL_CLK_IPG	(1 << 6)
-#define MX3_TCTL_FRR		(1 << 9)
-#define MX3_IR			0x0c
-#define MX3_TSTAT		0x08
-#define MX3_TSTAT_OF1		(1 << 0)
-#define MX3_TCN			0x24
-#define MX3_TCMP		0x10
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG		(1 << 6)
+#define V2_TCTL_FRR		(1 << 9)
+#define V2_IR			0x0c
+#define V2_TSTAT		0x08
+#define V2_TSTAT_OF1		(1 << 0)
+#define V2_TCN			0x24
+#define V2_TCMP			0x10
+
+#define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2()	(!timer_is_v1())
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
@@ -66,8 +75,8 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
-		__raw_writel(0, timer_base + MX3_IR);
+	if (timer_is_v2())
+		__raw_writel(0, timer_base + V2_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
 		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
@@ -76,8 +85,8 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3() || cpu_is_mx25())
-		__raw_writel(1<<0, timer_base + MX3_IR);
+	if (timer_is_v2())
+		__raw_writel(1<<0, timer_base + V2_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
 			timer_base + MXC_TCTL);
@@ -86,12 +95,14 @@ static inline void gpt_irq_enable(void)
 
 static void gpt_irq_acknowledge(void)
 {
-	if (cpu_is_mx1())
-		__raw_writel(0, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx2())
-		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3() || cpu_is_mx25())
-		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+	if (timer_is_v1()) {
+		if (cpu_is_mx1())
+			__raw_writel(0, timer_base + MX1_2_TSTAT);
+		else
+			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+				timer_base + MX1_2_TSTAT);
+	} else if (timer_is_v2())
+		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
 }
 
 static cycle_t mx1_2_get_cycles(struct clocksource *cs)
@@ -99,9 +110,9 @@ static cycle_t mx1_2_get_cycles(struct clocksource *cs)
 	return __raw_readl(timer_base + MX1_2_TCN);
 }
 
-static cycle_t mx3_get_cycles(struct clocksource *cs)
+static cycle_t v2_get_cycles(struct clocksource *cs)
 {
-	return __raw_readl(timer_base + MX3_TCN);
+	return __raw_readl(timer_base + V2_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
@@ -117,8 +128,8 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
-		clocksource_mxc.read = mx3_get_cycles;
+	if (timer_is_v2())
+		clocksource_mxc.read = v2_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
@@ -142,16 +153,16 @@ static int mx1_2_set_next_event(unsigned long evt,
 				-ETIME : 0;
 }
 
-static int mx3_set_next_event(unsigned long evt,
+static int v2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+	tcmp = __raw_readl(timer_base + V2_TCN) + evt;
 
-	__raw_writel(tcmp, timer_base + MX3_TCMP);
+	__raw_writel(tcmp, timer_base + V2_TCMP);
 
-	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
+	return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -180,9 +191,9 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3() || cpu_is_mx25())
-			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
-					timer_base + MX3_TCMP);
+		if (timer_is_v2())
+			__raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
+					timer_base + V2_TCMP);
 		else
 			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
 					timer_base + MX1_2_TCMP);
@@ -233,8 +244,8 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3() || cpu_is_mx25())
-		tstat = __raw_readl(timer_base + MX3_TSTAT);
+	if (timer_is_v2())
+		tstat = __raw_readl(timer_base + V2_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
@@ -264,8 +275,8 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3() || cpu_is_mx25())
-		clockevent_mxc.set_next_event = mx3_set_next_event;
+	if (timer_is_v2())
+		clockevent_mxc.set_next_event = v2_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
@@ -296,8 +307,8 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3() || cpu_is_mx25())
-		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+	if (timer_is_v2())
+		tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 0000000..9b86d2a
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+/*
+ *****************************************
+ * TZIC Registers                        *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL	0x0000	/* Control register */
+#define TZIC_INTTYPE	0x0004	/* Controller Type register */
+#define TZIC_IMPID	0x0008	/* Distributor Implementer Identification */
+#define TZIC_PRIOMASK	0x000C	/* Priority Mask Reg */
+#define TZIC_SYNCCTRL	0x0010	/* Synchronizer Control register */
+#define TZIC_DSMINT	0x0014	/* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i)	(0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i)	(0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0	0x0200	/* Source Set Register 0 */
+#define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
+#define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
+#define TZIC_PND0	0x0D00	/* Pending Register 0 */
+#define TZIC_HIPND0	0x0D80	/* High Priority Pending Register */
+#define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
+#define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
+#define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+	int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+	__raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * 			disble as wake-up if equal to zero
+ *
+ * @return       This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+	unsigned int index, off;
+
+	index = irq >> 5;
+	off = irq & 0x1F;
+
+	if (index > 3)
+		return -EINVAL;
+
+	if (enable)
+		wakeup_intr[index] |= (1 << off);
+	else
+		wakeup_intr[index] &= ~(1 << off);
+
+	return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+	.name = "MXC_TZIC",
+	.ack = tzic_mask_irq,
+	.mask = tzic_mask_irq,
+	.unmask = tzic_unmask_irq,
+	.set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+	int i;
+
+	tzic_base = irqbase;
+	/* put the TZIC into the reset value with
+	 * all interrupts disabled
+	 */
+	i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+	/* disable all interrupts */
+	for (i = 0; i < 4; i++)
+		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+	/* all IRQ no FIQ Warning :: No selection */
+
+	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+		set_irq_chip(i, &mxc_tzic_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	mxc_register_gpios();
+
+	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle		1 if called in idle loop (ENSET0 register);
+ *				0 to be used when called from low power entry
+ * @return			0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+	unsigned int i, v;
+
+	__raw_writel(1, tzic_base + TZIC_DSMINT);
+	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+		return -EAGAIN;
+
+	for (i = 0; i < 4; i++) {
+		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+		__raw_writel(v, TZIC_WAKEUP0(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 159daf5..5da3f97 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -19,4 +19,9 @@ config HAS_MTU
 	  to multiple interrupt generating programmable
 	  32-bit free running decrementing counters.
 
+config NOMADIK_GPIO
+	bool
+	help
+	  Support for the Nomadik GPIO controller.
+
 endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
index 37c7cdd..c335473 100644
--- a/arch/arm/plat-nomadik/Makefile
+++ b/arch/arm/plat-nomadik/Makefile
@@ -3,3 +3,4 @@
 # Licensed under GPLv2
 
 obj-$(CONFIG_HAS_MTU)	+= timer.o
+obj-$(CONFIG_NOMADIK_GPIO)	+= gpio.o
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
new file mode 100644
index 0000000..5a6ef25
--- /dev/null
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -0,0 +1,435 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	struct clk *clk;
+	unsigned int parent_irq;
+	spinlock_t lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
+				  int gpio, bool enable)
+{
+	u32 bitmask = nmk_gpio_get_bitmask(gpio);
+	u32 reg;
+
+	/* we must individually set/clear the two edges */
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+	}
+}
+
+static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	nmk_gpio_irq_modify(irq, false);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	nmk_gpio_irq_modify(irq, true);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, false);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, true);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip = get_irq_chip(irq);
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	if (host_chip->mask_ack)
+		host_chip->mask_ack(irq);
+	else {
+		host_chip->mask(irq);
+		if (host_chip->ack)
+			host_chip->ack(irq);
+	}
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+
+	host_chip->unmask(irq);
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+		set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct platform_device *dev)
+{
+	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	struct resource *res;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	if (!pdata)
+		return -ENODEV;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto out;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+
+	if (request_mem_region(res->start, resource_size(res),
+			       dev_name(&dev->dev)) == NULL) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_release;
+	}
+
+	clk_enable(clk);
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->clk = clk;
+	nmk_chip->addr = io_p2v(res->start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = irq;
+	spin_lock_init(&nmk_chip->lock);
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	platform_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+out_free:
+	kfree(nmk_chip);
+out_clk:
+	clk_disable(clk);
+	clk_put(clk);
+out_release:
+	release_mem_region(res->start, resource_size(res));
+out:
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int __exit nmk_gpio_remove(struct platform_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct resource *res;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	nmk_chip = platform_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	clk_disable(nmk_chip->clk);
+	clk_put(nmk_chip->clk);
+	kfree(nmk_chip);
+	release_mem_region(res->start, resource_size(res));
+	return 0;
+}
+
+
+static struct platform_driver nmk_gpio_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = __exit_p(nmk_gpio_remove),
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return platform_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
new file mode 100644
index 0000000..4200811
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -0,0 +1,70 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+};
+
+#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h
new file mode 100644
index 0000000..1621db6
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/i2c.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PLAT_I2C_H
+#define __PLAT_I2C_H
+
+enum i2c_freq_mode {
+	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
+	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
+	I2C_FREQ_MODE_HIGH_SPEED	/* up to 3.4 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq:	clock frequency for the operation mode
+ * @slsu:	Slave data setup time in ns.
+ *		The needed setup time for three modes of operation
+ *		are 250ns, 100ns and 10ns respectively thus leading
+ *		to the values of 14, 6, 2 for a 48 MHz i2c clk
+ * @tft:	Tx FIFO Threshold in bytes
+ * @rft:	Rx FIFO Threshold in bytes
+ * @sm:		speed mode
+ */
+struct nmk_i2c_controller {
+	unsigned long	clk_freq;
+	unsigned short	slsu;
+	unsigned char 	tft;
+	unsigned char 	rft;
+	enum i2c_freq_mode	sm;
+};
+
+#endif	/* __PLAT_I2C_H */
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
new file mode 100644
index 0000000..4d12ea4
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -0,0 +1,239 @@
+/*
+ * arch/arm/plat-nomadik/include/plat/ste_dma40.h
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define	STEDMA40_DEV_SRC_MEMORY (-1)
+
+/*
+ * Description of bitfields of channel_type variable is available in
+ * the info structure.
+ */
+
+/* Priority */
+#define STEDMA40_INFO_PRIO_TYPE_POS 2
+#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
+#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)
+
+/* Mode  */
+#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
+#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+
+/* Mode options */
+#define STEDMA40_INFO_CH_MODE_OPT_POS 8
+#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+
+/* Interrupt */
+#define STEDMA40_INFO_TIM_POS 10
+#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
+#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)
+
+/* End of channel_type configuration */
+
+#define STEDMA40_ESIZE_8_BIT  0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1  0x4
+#define STEDMA40_PSIZE_PHY_2  0x0
+#define STEDMA40_PSIZE_PHY_4  0x1
+#define STEDMA40_PSIZE_PHY_8  0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+enum stedma40_flow_ctrl {
+	STEDMA40_NO_FLOW_CTRL,
+	STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_endianess {
+	STEDMA40_LITTLE_ENDIAN,
+	STEDMA40_BIG_ENDIAN
+};
+
+enum stedma40_periph_data_width {
+	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+struct stedma40_half_channel_info {
+	enum stedma40_endianess endianess;
+	enum stedma40_periph_data_width data_width;
+	int psize;
+	enum stedma40_flow_ctrl flow_ctrl;
+};
+
+enum stedma40_xfer_dir {
+	STEDMA40_MEM_TO_MEM,
+	STEDMA40_MEM_TO_PERIPH,
+	STEDMA40_PERIPH_TO_MEM,
+	STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @channel_type: priority, mode, mode options and interrupt configuration.
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
+ * @pre_transfer: Callback used if needed before preparation of transfer.
+ * Only called if device is set. size of bytes to transfer
+ * (in case of multiple element transfer size is size of the first element).
+ *
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+	enum stedma40_xfer_dir			 dir;
+	unsigned int				 channel_type;
+	int					 src_dev_type;
+	int					 dst_dev_type;
+	struct stedma40_half_channel_info	 src_info;
+	struct stedma40_half_channel_info	 dst_info;
+	void					*pre_transfer_data;
+	int (*pre_transfer)			(struct dma_chan *chan,
+						 void *data,
+						 int size);
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @llis_per_log: number of max linked list items per logical channel
+ *
+ */
+struct stedma40_platform_data {
+	u32				 dev_len;
+	const dma_addr_t		*dev_tx;
+	const dma_addr_t		*dev_rx;
+	int				*memcpy;
+	u32				 memcpy_len;
+	struct stedma40_chan_cfg	*memcpy_conf_phy;
+	struct stedma40_chan_cfg	*memcpy_conf_log;
+	unsigned int			 llis_per_log;
+};
+
+/**
+ * setdma40_set_psize() - Used for changing the package size of an
+ * already configured dma channel.
+ *
+ * @chan: dmaengine handle
+ * @src_psize: new package side for src. (STEDMA40_PSIZE*)
+ * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
+ *
+ * returns 0 on ok, otherwise negative error number.
+ */
+int stedma40_set_psize(struct dma_chan *chan,
+		       int src_psize,
+		       int dst_psize);
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
+ * scattergatter lists.
+ *
+ * @chan: dmaengine handle
+ * @sgl_dst: Destination scatter list
+ * @sgl_src: Source scatter list
+ * @sgl_len: The length of each scatterlist. Both lists must be of equal length
+ * and each element must match the corresponding element in the other scatter
+ * list.
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
+						   struct scatterlist *sgl_dst,
+						   struct scatterlist *sgl_src,
+						   unsigned int sgl_len,
+						   unsigned long flags);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_data_direction direction,
+					    unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_table(&sg, 1);
+	sg.dma_address = addr;
+	sg.length = size;
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1,
+						  direction, flags);
+}
+
+#endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 62f18ad..08aaa4a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ * Copyright (C) 2010 Alessandro Rubini
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -13,135 +13,177 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/err.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
 
-static u32	nmdk_count;		/* accumulated count */
-static u32	nmdk_cycle;		/* write-once */
-
-/* setup by the platform code */
-void __iomem *mtu_base;
+void __iomem *mtu_base; /* ssigned by machine code */
 
 /*
- * clocksource: the MTU device is a decrementing counters, so we negate
- * the value being read.
+ * Kernel assumes that sched_clock can be called early
+ * but the MTU may not yet be initialized.
  */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
+static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
 {
-	u32 count = readl(mtu_base + MTU_VAL(0));
-	return nmdk_count + nmdk_cycle - count;
+	return 0;
+}
 
+/* clocksource: MTU decrements, so we negate the value being read. */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	return -readl(mtu_base + MTU_VAL(0));
 }
 
 static struct clocksource nmdk_clksrc = {
 	.name		= "mtu_0",
-	.rating		= 120,
-	.read		= nmdk_read_timer,
+	.rating		= 200,
+	.read		= nmdk_read_timer_dummy,
+	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 /*
- * Clockevent device: currently only periodic mode is supported
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
  */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(nmdk_clksrc.read(
+				  &nmdk_clksrc),
+				  nmdk_clksrc.mult,
+				  nmdk_clksrc.shift);
+}
+
+/* Clockevent device: use one-shot mode */
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-	unsigned long flags;
+	u32 cr;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* enable interrupts -- and count current value? */
-		raw_local_irq_save(flags);
-		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
+		pr_err("%s: periodic mode not supported\n", __func__);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		BUG(); /* Not supported, yet */
-		/* FALLTHROUGH */
+		/* Load highest value, enable device, enable interrupts */
+		cr = readl(mtu_base + MTU_CR(1));
+		writel(0, mtu_base + MTU_LR(1));
+		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
+		writel(0x2, mtu_base + MTU_IMSC);
+		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
 		/* disable irq */
-		raw_local_irq_save(flags);
-		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
+		writel(0, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
 	}
 }
 
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+	/* writing the value has immediate effect */
+	writel(evt, mtu_base + MTU_LR(1));
+	return 0;
+}
+
 static struct clock_event_device nmdk_clkevt = {
-	.name		= "mtu_0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.name		= "mtu_1",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
-	.rating		= 100,
+	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
+	.set_next_event	= nmdk_clkevt_next,
 };
 
 /*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
- * as we are the only users of mtu0 by now.
+ * IRQ Handler for timer 1 of the MTU block.
  */
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
-	/* ack: "interrupt clear register" */
-	writel(1 << 0, mtu_base + MTU_ICR);
-
-	/* we can't count lost ticks, unfortunately */
-	nmdk_count += nmdk_cycle;
-	nmdk_clkevt.event_handler(&nmdk_clkevt);
+	struct clock_event_device *evdev = dev_id;
 
+	writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
+	evdev->event_handler(evdev);
 	return IRQ_HANDLED;
 }
 
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
 static struct irqaction nmdk_timer_irq = {
 	.name		= "Nomadik Timer Tick",
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.handler	= nmdk_timer_interrupt,
+	.dev_id		= &nmdk_clkevt,
 };
 
-static void nmdk_timer_reset(void)
+void __init nmdk_timer_init(void)
 {
+	unsigned long rate;
+	struct clk *clk0;
+	struct clk *clk1;
 	u32 cr;
 
-	writel(0, mtu_base + MTU_CR(0)); /* off */
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
+
+	clk1 = clk_get_sys("mtu1", NULL);
+	BUG_ON(IS_ERR(clk1));
+
+	clk_enable(clk0);
+	clk_enable(clk1);
+
+	/*
+	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
+	 * use a divide-by-16 counter if it's more than 16MHz
+	 */
+	cr = MTU_CRn_32BITS;;
+	rate = clk_get_rate(clk0);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
 
-	/* configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	/* Timer 0 is the free running clocksource */
 	writel(cr, mtu_base + MTU_CR(0));
+	writel(0, mtu_base + MTU_LR(0));
+	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
-
-void __init nmdk_timer_init(void)
-{
-	unsigned long rate;
-	int bits;
-
-	rate = CLOCK_TICK_RATE; /* 2.4MHz */
-	nmdk_cycle = (rate + HZ/2) / HZ;
-
-	/* Init the timer and register clocksource */
-	nmdk_timer_reset();
 
 	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
-	bits =  8*sizeof(nmdk_count);
-	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+	/* Now the scheduling clock is ready */
+	nmdk_clksrc.read = nmdk_read_timer;
 
 	if (clocksource_register(&nmdk_clksrc))
-		printk(KERN_ERR "timer: failed to initialize clock "
-			"source %s\n", nmdk_clksrc.name);
+		pr_err("timer: failed to initialize clock source %s\n",
+		       nmdk_clksrc.name);
+
+	/* Timer 1 is used for events, fix according to rate */
+	cr = MTU_CRn_32BITS;
+	rate = clk_get_rate(clk1);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
+	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
+	nmdk_clkevt.min_delta_ns =
+		clockevent_delta2ns(0x00000002, &nmdk_clkevt);
+	nmdk_clkevt.cpumask	= cpumask_of(0);
 
 	/* Register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
-	nmdk_clkevt.cpumask = cpumask_of(0);
 	clockevents_register_device(&nmdk_clkevt);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index e2ea04a..78b49a6 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -7,27 +7,37 @@ config ARCH_OMAP_OTG
 
 choice
 	prompt "OMAP System Type"
-	default ARCH_OMAP1
+	default ARCH_OMAP2PLUS
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
 	select COMMON_CLKDEV
+	help
+	  "Systems based on omap7xx, omap15xx or omap16xx"
+
+config ARCH_OMAP2PLUS
+	bool "TI OMAP2/3/4"
+	select COMMON_CLKDEV
+	help
+	  "Systems based on omap24xx, omap34xx or omap44xx"
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
+	depends on ARCH_OMAP2PLUS
 	select CPU_V6
-	select COMMON_CLKDEV
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
+	depends on ARCH_OMAP2PLUS
 	select CPU_V7
-	select COMMON_CLKDEV
+	select USB_ARCH_HAS_EHCI
+	select ARM_L1_CACHE_SHIFT_6
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
+	depends on ARCH_OMAP2PLUS
 	select CPU_V7
 	select ARM_GIC
-	select COMMON_CLKDEV
 
 endchoice
 
@@ -100,8 +110,13 @@ config OMAP_IOMMU
 	tristate
 
 config OMAP_IOMMU_DEBUG
-	depends on OMAP_IOMMU
-	tristate
+       tristate "Export OMAP IOMMU internals in DebugFS"
+       depends on OMAP_IOMMU && DEBUG_FS
+       help
+         Select this to see extensive information about
+         the internal state of OMAP IOMMU in debugfs.
+
+         Say N unless you know you need this.
 
 choice
 	prompt "System timer"
@@ -116,7 +131,7 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -126,6 +141,23 @@ config OMAP_32K_TIMER
 
 endchoice
 
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+	depends on ARCH_OMAP3 && PM
+	default n
+	help
+	  Without this option, L2 Auxiliary control register contents are
+	  lost during off-mode entry on HS/EMU devices. This feature
+	  requires support from PPA / boot-loader in HS/EMU devices, which
+	  currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+	int "Service ID for the support routine to set L2 AUX control"
+	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	default 43
+	help
+	  PPA routine service ID for setting L2 auxiliary control register.
+
 config OMAP_32K_TIMER_HZ
 	int "Kernel internal timer frequency for 32KHz timer"
 	range 32 1024
@@ -137,29 +169,10 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 
-choice
-	prompt "Low-level debug console UART"
-	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_NONE
-
-config OMAP_LL_DEBUG_UART1
-	bool "UART1"
-
-config OMAP_LL_DEBUG_UART2
-	bool "UART2"
-
-config OMAP_LL_DEBUG_UART3
-	bool "UART3"
-
-config OMAP_LL_DEBUG_NONE
-	bool "None"
-
-endchoice
-
 config OMAP_SERIAL_WAKE
 	bool "Enable wake-up events for serial ports"
 	depends on ARCH_OMAP1 && OMAP_MUX
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index d9f8c84..7190cbd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -12,14 +12,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
@@ -32,9 +30,9 @@ static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 
-/*-------------------------------------------------------------------------
+/*
  * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 int clk_enable(struct clk *clk)
 {
@@ -92,9 +90,9 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-/*-------------------------------------------------------------------------
+/*
  * Optional clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
@@ -140,9 +138,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
-	if (cpu_is_omap44xx())
-	/* OMAP4 clk framework not supported yet */
-		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -169,11 +164,11 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-/*-------------------------------------------------------------------------
+/*
  * OMAP specific clock functions shared between omap1 and omap2
- *-------------------------------------------------------------------------*/
+ */
 
-unsigned int __initdata mpurate;
+int __initdata mpurate;
 
 /*
  * By default we use the rate set by the bootloader.
@@ -199,6 +194,17 @@ unsigned long followparent_recalc(struct clk *clk)
 	return clk->parent->rate;
 }
 
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+	WARN_ON(!clk->fixed_div);
+
+	return clk->parent->rate / clk->fixed_div;
+}
+
 void clk_reparent(struct clk *child, struct clk *parent)
 {
 	list_del_init(&child->sibling);
@@ -211,7 +217,7 @@ void clk_reparent(struct clk *child, struct clk *parent)
 }
 
 /* Propagate rate to children */
-void propagate_rate(struct clk * tclk)
+void propagate_rate(struct clk *tclk)
 {
 	struct clk *clkp;
 
@@ -302,6 +308,33 @@ void clk_enable_init_clocks(void)
 	}
 }
 
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node) {
+		if (!strcmp(c->name, name)) {
+			ret = c;
+			break;
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
 /*
  * Low level helpers
  */
@@ -319,6 +352,16 @@ const struct clkops clkops_null = {
 	.disable	= clkll_disable_null,
 };
 
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_null,
+};
+
 #ifdef CONFIG_CPU_FREQ
 void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
@@ -341,7 +384,9 @@ void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
 }
 #endif
 
-/*-------------------------------------------------------------------------*/
+/*
+ *
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 /*
@@ -356,7 +401,7 @@ static int __init clk_disable_unused(void)
 		if (ck->ops == &clkops_null)
 			continue;
 
-		if (ck->usecount > 0 || ck->enable_reg == 0)
+		if (ck->usecount > 0 || !ck->enable_reg)
 			continue;
 
 		spin_lock_irqsave(&clockfw_lock, flags);
@@ -391,14 +436,12 @@ static struct dentry *clk_debugfs_root;
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
 
 	p += sprintf(p, "%s", c->name);
-	if (c->id != 0)
-		sprintf(p, ":%d", c->id);
 	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
 	if (!d)
 		return -ENOMEM;
@@ -423,7 +466,7 @@ static int clk_debugfs_register_one(struct clk *c)
 
 err_out:
 	d = c->dent;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dent);
 	return err;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index dddc027..219c01e 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -34,6 +34,7 @@
 #include <plat/control.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
+#include <plat/serial.h>
 
 #include <plat/clock.h>
 
@@ -43,15 +44,9 @@
 
 #define NO_LENGTH_CHECK 0xffffffff
 
-unsigned char omap_bootloader_tag[512];
-int omap_bootloader_tag_len;
-
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
-/* used by omap-smp.c and board-4430sdp.c */
-void __iomem *gic_cpu_base_addr;
-
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
@@ -99,10 +94,17 @@ EXPORT_SYMBOL(omap_get_var_config);
 
 #include <linux/clocksource.h>
 
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
 #ifdef CONFIG_ARCH_OMAP16XX
 static cycle_t omap16xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
 }
 #else
 #define omap16xx_32k_read	NULL
@@ -111,7 +113,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP2420
 static cycle_t omap2420_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap2420_32k_read	NULL
@@ -120,16 +122,16 @@ static cycle_t omap2420_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP2430
 static cycle_t omap2430_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap2430_32k_read	NULL
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static cycle_t omap34xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap34xx_32k_read	NULL
@@ -138,7 +140,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP4
 static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap44xx_32k_read	NULL
@@ -226,6 +228,8 @@ static int __init omap_init_clocksource_32k(void)
 		clocksource_32k.mult = clocksource_hz2mult(32768,
 					    clocksource_32k.shift);
 
+		offset_32k = clocksource_32k.read(&clocksource_32k);
+
 		if (clocksource_register(&clocksource_32k))
 			printk(err, clocksource_32k.name);
 	}
@@ -245,6 +249,7 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_sdrc(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
+	omap2_set_globals_uart(omap2_globals);
 }
 
 #endif
@@ -254,11 +259,14 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+	.sdrc	= OMAP2420_SDRC_BASE,
+	.sms	= OMAP2420_SMS_BASE,
+	.ctrl	= OMAP2420_CTRL_BASE,
+	.prm	= OMAP2420_PRM_BASE,
+	.cm	= OMAP2420_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_242x(void)
@@ -272,11 +280,14 @@ void __init omap2_set_globals_242x(void)
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+	.sdrc	= OMAP243X_SDRC_BASE,
+	.sms	= OMAP243X_SMS_BASE,
+	.ctrl	= OMAP243X_CTRL_BASE,
+	.prm	= OMAP2430_PRM_BASE,
+	.cm	= OMAP2430_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_243x(void)
@@ -285,21 +296,31 @@ void __init omap2_set_globals_243x(void)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals omap343x_globals = {
+static struct omap_globals omap3_globals = {
 	.class	= OMAP343X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+	.sdrc	= OMAP343X_SDRC_BASE,
+	.sms	= OMAP343X_SMS_BASE,
+	.ctrl	= OMAP343X_CTRL_BASE,
+	.prm	= OMAP3430_PRM_BASE,
+	.cm	= OMAP3430_CM_BASE,
+	.uart1_phys	= OMAP3_UART1_BASE,
+	.uart2_phys	= OMAP3_UART2_BASE,
+	.uart3_phys	= OMAP3_UART3_BASE,
 };
 
 void __init omap2_set_globals_343x(void)
 {
-	__omap2_set_globals(&omap343x_globals);
+	__omap2_set_globals(&omap3_globals);
+}
+
+void __init omap2_set_globals_36xx(void)
+{
+	omap3_globals.uart4_phys = OMAP3_UART4_BASE;
+
+	__omap2_set_globals(&omap3_globals);
 }
 #endif
 
@@ -307,10 +328,14 @@ void __init omap2_set_globals_343x(void)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+	.ctrl	= OMAP443X_CTRL_BASE,
+	.prm	= OMAP4430_PRM_BASE,
+	.cm	= OMAP4430_CM_BASE,
+	.cm2	= OMAP4430_CM2_BASE,
+	.uart1_phys	= OMAP4_UART1_BASE,
+	.uart2_phys	= OMAP4_UART2_BASE,
+	.uart3_phys	= OMAP4_UART3_BASE,
+	.uart4_phys	= OMAP4_UART4_BASE,
 };
 
 void __init omap2_set_globals_443x(void)
@@ -318,6 +343,7 @@ void __init omap2_set_globals_443x(void)
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
 	omap2_set_globals_prcm(&omap4_globals);
+	omap2_set_globals_uart(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 30b5db7..95677d1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -28,6 +29,7 @@
 #include <plat/menelaus.h>
 #include <plat/mcbsp.h>
 #include <plat/dsp_common.h>
+#include <plat/omap44xx.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -192,6 +194,41 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
+		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
+
+static struct resource mcpdm_resources[] = {
+	{
+		.name		= "mcpdm_mem",
+		.start		= OMAP44XX_MCPDM_BASE,
+		.end		= OMAP44XX_MCPDM_BASE + SZ_4K,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.name		= "mcpdm_irq",
+		.start		= OMAP44XX_IRQ_MCPDM,
+		.end		= OMAP44XX_IRQ_MCPDM,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_mcpdm_device = {
+	.name		= "omap-mcpdm",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mcpdm_resources),
+	.resource	= mcpdm_resources,
+};
+
+static void omap_init_mcpdm(void)
+{
+	(void) platform_device_register(&omap_mcpdm_device);
+}
+#else
+static inline void omap_init_mcpdm(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
@@ -244,7 +281,7 @@ fail:
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 #define	OMAP_RNG_BASE		0x480A0000
 #else
 #define	OMAP_RNG_BASE		0xfffe5000
@@ -385,6 +422,7 @@ static int __init omap_init_devices(void)
 	omap_init_dsp();
 	omap_init_kp();
 	omap_init_rng();
+	omap_init_mcpdm();
 	omap_init_uwire();
 	omap_init_wdt();
 	return 0;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 728c642..f7f571e 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
@@ -500,7 +501,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x2;
 			break;
 		}
-		/* not supported by current hardware on OMAP1
+		/*
+		 * not supported by current hardware on OMAP1
 		 * w |= (0x03 << 7);
 		 * fall through
 		 */
@@ -509,7 +511,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -603,7 +606,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -708,6 +712,21 @@ static inline void omap2_enable_irq_lch(int lch)
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
+static inline void omap2_disable_irq_lch(int lch)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!cpu_class_is_omap2())
+		return;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	val = dma_read(IRQENABLE_L0);
+	val &= ~(1 << lch);
+	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
 int omap_request_dma(int dev_id, const char *dev_name,
 		     void (*callback)(int lch, u16 ch_status, void *data),
 		     void *data, int *dma_ch_out)
@@ -806,14 +825,7 @@ void omap_free_dma(int lch)
 	}
 
 	if (cpu_class_is_omap2()) {
-		u32 val;
-
-		spin_lock_irqsave(&dma_chan_lock, flags);
-		/* Disable interrupts */
-		val = dma_read(IRQENABLE_L0);
-		val &= ~(1 << lch);
-		dma_write(val, IRQENABLE_L0);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		omap2_disable_irq_lch(lch);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -936,6 +948,15 @@ void omap_start_dma(int lch)
 {
 	u32 l;
 
+	/*
+	 * The CPC/CDAC register needs to be initialized to zero
+	 * before starting dma transfer.
+	 */
+	if (cpu_is_omap15xx())
+		dma_write(0, CPC(lch));
+	else
+		dma_write(0, CDAC(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -1267,8 +1288,10 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 		return -EINVAL;
 	}
 
-	/* Allocate a queue to maintain the status of the channels
-	 * in the chain */
+	/*
+	 * Allocate a queue to maintain the status of the channels
+	 * in the chain
+	 */
 	channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
 	if (channels == NULL) {
 		printk(KERN_ERR "omap_dma: No memory for channel queue\n");
@@ -1870,8 +1893,7 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 #define omap1_dma_irq_handler	NULL
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 
 static int omap2_dma_handle_ch(int ch)
 {
@@ -1898,7 +1920,8 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
 		if (cpu_class_is_omap2()) {
-			/* Errata: sDMA Channel is not disabled
+			/*
+			 * Errata: sDMA Channel is not disabled
 			 * after a transaction error. So we explicitely
 			 * disable the channel
 			 */
@@ -2098,6 +2121,9 @@ static int __init omap_init_dma(void)
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
+		if (cpu_class_is_omap2())
+			omap2_disable_irq_lch(ch);
+
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
 
@@ -2133,13 +2159,13 @@ static int __init omap_init_dma(void)
 	if (cpu_class_is_omap2()) {
 		int irq;
 		if (cpu_is_omap44xx())
-			irq = INT_44XX_SDMA_IRQ0;
+			irq = OMAP44XX_IRQ_SDMA_0;
 		else
 			irq = INT_24XX_SDMA_IRQ0;
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		/* Enable smartidle idlemodes and autoidle */
 		u32 v = dma_read(OCP_SYSCONFIG);
 		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
@@ -2150,7 +2176,8 @@ static int __init omap_init_dma(void)
 			DMA_SYSCONFIG_AUTOIDLE);
 		dma_write(v , OCP_SYSCONFIG);
 		/* reserve dma channels 0 and 1 in high security devices */
-		if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		if (cpu_is_omap34xx() &&
+			(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
 			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
 					"HS ROM code\n");
 			dma_chan[0].dev_id = 0;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 08ccf89..44bafda 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -153,8 +153,7 @@
 struct omap_dm_timer {
 	unsigned long phys_base;
 	int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 	struct clk *iclk, *fclk;
 #endif
 	void __iomem *io_base;
@@ -163,20 +162,9 @@ struct omap_dm_timer {
 	unsigned posted:1;
 };
 
-#ifdef CONFIG_ARCH_OMAP1
-
-#define omap_dm_clk_enable(x)
-#define omap_dm_clk_disable(x)
-#define omap2_dm_timers			NULL
-#define omap2_dm_source_names		NULL
-#define omap2_dm_source_clocks		NULL
-#define omap3_dm_timers			NULL
-#define omap3_dm_source_names		NULL
-#define omap3_dm_source_clocks		NULL
-#define omap4_dm_timers			NULL
-#define omap4_dm_source_names		NULL
-#define omap4_dm_source_clocks		NULL
+static int dm_timer_count;
 
+#ifdef CONFIG_ARCH_OMAP1
 static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
 	{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
@@ -188,20 +176,14 @@ static struct omap_dm_timer omap1_dm_timers[] = {
 	{ .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
 };
 
-static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
+static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
 
-#elif defined(CONFIG_ARCH_OMAP2)
-
-#define omap_dm_clk_enable(x)		clk_enable(x)
-#define omap_dm_clk_disable(x)		clk_disable(x)
+#else
 #define omap1_dm_timers			NULL
-#define omap3_dm_timers			NULL
-#define omap3_dm_source_names		NULL
-#define omap3_dm_source_clocks		NULL
-#define omap4_dm_timers			NULL
-#define omap4_dm_source_names		NULL
-#define omap4_dm_source_clocks		NULL
+#define omap1_dm_timer_count		0
+#endif	/* CONFIG_ARCH_OMAP1 */
 
+#ifdef CONFIG_ARCH_OMAP2
 static struct omap_dm_timer omap2_dm_timers[] = {
 	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
 	{ .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
@@ -225,20 +207,16 @@ static const char *omap2_dm_source_names[] __initdata = {
 };
 
 static struct clk *omap2_dm_source_clocks[3];
-static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-
-#elif defined(CONFIG_ARCH_OMAP3)
+static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
 
-#define omap_dm_clk_enable(x)		clk_enable(x)
-#define omap_dm_clk_disable(x)		clk_disable(x)
-#define omap1_dm_timers			NULL
+#else
 #define omap2_dm_timers			NULL
+#define omap2_dm_timer_count		0
 #define omap2_dm_source_names		NULL
 #define omap2_dm_source_clocks		NULL
-#define omap4_dm_timers			NULL
-#define omap4_dm_source_names		NULL
-#define omap4_dm_source_clocks		NULL
+#endif	/* CONFIG_ARCH_OMAP2 */
 
+#ifdef CONFIG_ARCH_OMAP3
 static struct omap_dm_timer omap3_dm_timers[] = {
 	{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
 	{ .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
@@ -261,47 +239,44 @@ static const char *omap3_dm_source_names[] __initdata = {
 };
 
 static struct clk *omap3_dm_source_clocks[2];
-static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
 
-#elif defined(CONFIG_ARCH_OMAP4)
-
-#define omap_dm_clk_enable(x)		clk_enable(x)
-#define omap_dm_clk_disable(x)		clk_disable(x)
-#define omap1_dm_timers			NULL
-#define omap2_dm_timers			NULL
-#define omap2_dm_source_names		NULL
-#define omap2_dm_source_clocks		NULL
+#else
 #define omap3_dm_timers			NULL
+#define omap3_dm_timer_count		0
 #define omap3_dm_source_names		NULL
 #define omap3_dm_source_clocks		NULL
+#endif	/* CONFIG_ARCH_OMAP3 */
 
+#ifdef CONFIG_ARCH_OMAP4
 static struct omap_dm_timer omap4_dm_timers[] = {
-	{ .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
-	{ .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
-	{ .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
-	{ .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
-	{ .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
-	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
-	{ .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
-	{ .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
-	{ .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
-	{ .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
-	{ .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
-	{ .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+	{ .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
+	{ .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
+	{ .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
+	{ .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
+	{ .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
+	{ .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
+	{ .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
+	{ .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
+	{ .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
+	{ .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
+	{ .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
+	{ .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
 };
 static const char *omap4_dm_source_names[] __initdata = {
-	"sys_ck",
-	"omap_32k_fck",
+	"sys_clkin_ck",
+	"sys_32k_ck",
 	NULL
 };
 static struct clk *omap4_dm_source_clocks[2];
-static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
 
 #else
-
-#error OMAP architecture not supported!
-
-#endif
+#define omap4_dm_timers			NULL
+#define omap4_dm_timer_count		0
+#define omap4_dm_source_names		NULL
+#define omap4_dm_source_clocks		NULL
+#endif	/* CONFIG_ARCH_OMAP4 */
 
 static struct omap_dm_timer *dm_timers;
 static const char **dm_source_names;
@@ -450,8 +425,12 @@ void omap_dm_timer_enable(struct omap_dm_timer *timer)
 	if (timer->enabled)
 		return;
 
-	omap_dm_clk_enable(timer->fclk);
-	omap_dm_clk_enable(timer->iclk);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	if (cpu_class_is_omap2()) {
+		clk_enable(timer->fclk);
+		clk_enable(timer->iclk);
+	}
+#endif
 
 	timer->enabled = 1;
 }
@@ -462,8 +441,12 @@ void omap_dm_timer_disable(struct omap_dm_timer *timer)
 	if (!timer->enabled)
 		return;
 
-	omap_dm_clk_disable(timer->iclk);
-	omap_dm_clk_disable(timer->fclk);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+	if (cpu_class_is_omap2()) {
+		clk_disable(timer->iclk);
+		clk_disable(timer->fclk);
+	}
+#endif
 
 	timer->enabled = 0;
 }
@@ -506,8 +489,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
 
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-				defined(CONFIG_ARCH_OMAP4)
+#else
 
 struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
@@ -551,8 +533,7 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 	if (l & OMAP_TIMER_CTRL_ST) {
 		l &= ~0x1;
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 		/* Readback to make sure write has completed */
 		omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
 		 /*
@@ -560,11 +541,11 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
@@ -764,17 +745,21 @@ int __init omap_dm_timer_init(void)
 
 	if (cpu_class_is_omap1()) {
 		dm_timers = omap1_dm_timers;
+		dm_timer_count = omap1_dm_timer_count;
 		map_size = SZ_2K;
 	} else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
+		dm_timer_count = omap2_dm_timer_count;
 		dm_source_names = omap2_dm_source_names;
 		dm_source_clocks = omap2_dm_source_clocks;
 	} else if (cpu_is_omap34xx()) {
 		dm_timers = omap3_dm_timers;
+		dm_timer_count = omap3_dm_timer_count;
 		dm_source_names = omap3_dm_source_names;
 		dm_source_clocks = omap3_dm_source_clocks;
 	} else if (cpu_is_omap44xx()) {
 		dm_timers = omap4_dm_timers;
+		dm_timer_count = omap4_dm_timer_count;
 		dm_source_names = omap4_dm_source_names;
 		dm_source_clocks = omap4_dm_source_clocks;
 	}
@@ -793,8 +778,7 @@ int __init omap_dm_timer_init(void)
 		timer->io_base = ioremap(timer->phys_base, map_size);
 		BUG_ON(!timer->io_base);
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-					defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 		if (cpu_class_is_omap2()) {
 			char clk_name[16];
 			sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d17620c..9b7e354 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -27,6 +27,7 @@
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
 
 /*
  * OMAP1510 GPIO registers
@@ -137,7 +138,11 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_SYSSTATUS		0x0114
+#define OMAP4_GPIO_IRQENABLE1		0x011c
+#define OMAP4_GPIO_WAKE_EN		0x0120
+#define OMAP4_GPIO_IRQSTATUS2		0x0128
+#define OMAP4_GPIO_IRQENABLE2		0x012c
 #define OMAP4_GPIO_CTRL			0x0130
 #define OMAP4_GPIO_OE			0x0134
 #define OMAP4_GPIO_DATAIN		0x0138
@@ -148,6 +153,10 @@
 #define OMAP4_GPIO_FALLINGDETECT	0x014c
 #define OMAP4_GPIO_DEBOUNCENABLE	0x0150
 #define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
+#define OMAP4_GPIO_CLEARWKUENA		0x0180
+#define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
@@ -177,13 +186,11 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||  \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
@@ -197,6 +204,7 @@ struct gpio_bank {
 	struct gpio_chip chip;
 	struct clk *dbck;
 	u32 mod_usage;
+	u32 dbck_enable_mask;
 };
 
 #define METHOD_MPUIO		0
@@ -204,6 +212,7 @@ struct gpio_bank {
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_7XX		3
 #define METHOD_GPIO_24XX	5
+#define METHOD_GPIO_44XX	6
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -248,7 +257,7 @@ static struct gpio_bank gpio_bank_7xx[7] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 static struct gpio_bank gpio_bank_242x[4] = {
 	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
@@ -276,7 +285,7 @@ static struct gpio_bank gpio_bank_243x[5] = {
 
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 static struct gpio_bank gpio_bank_34xx[6] = {
 	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
@@ -304,8 +313,6 @@ struct omap3_gpio_regs {
 	u32 risingdetect;
 	u32 fallingdetect;
 	u32 dataout;
-	u32 setwkuena;
-	u32 setdataout;
 };
 
 static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
@@ -313,18 +320,18 @@ static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
-		METHOD_GPIO_24XX },
+	{ OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
+		METHOD_GPIO_44XX },
+	{ OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_44XX },
+	{ OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_44XX },
+	{ OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_44XX },
+	{ OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_44XX },
+	{ OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
+		METHOD_GPIO_44XX },
 };
 
 #endif
@@ -426,13 +433,13 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		reg += OMAP4_GPIO_OE;
 		break;
 #endif
@@ -493,7 +500,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -503,7 +510,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		if (enable)
 			reg += OMAP4_GPIO_SETDATAOUT;
 		else
@@ -546,13 +553,13 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		reg += OMAP4_GPIO_DATAIN;
 		break;
 #endif
@@ -592,12 +599,16 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-		defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
+#endif
 	default:
 		return -EINVAL;
 	}
@@ -613,79 +624,61 @@ do {	\
 	__raw_writel(l, base + reg); \
 } while(0)
 
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+		unsigned debounce)
 {
-	struct gpio_bank *bank;
-	void __iomem *reg;
-	unsigned long flags;
-	u32 val, l = 1 << get_gpio_index(gpio);
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
+
+	if (debounce < 32)
+		debounce = 0x01;
+	else if (debounce > 7936)
+		debounce = 0xff;
+	else
+		debounce = (debounce / 0x1f) - 1;
 
-	if (cpu_class_is_omap1())
-		return;
+	l = 1 << get_gpio_index(gpio);
+
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(debounce, reg);
 
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
-#ifdef CONFIG_ARCH_OMAP4
-	reg += OMAP4_GPIO_DEBOUNCENABLE;
-#else
-	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-#endif
-	if (!(bank->mod_usage & l)) {
-		printk(KERN_ERR "GPIO %d not requested\n", gpio);
-		return;
-	}
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCENABLE;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 
-	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
 
-	if (enable && !(val & l))
+	if (debounce) {
 		val |= l;
-	else if (!enable && (val & l))
-		val &= ~l;
-	else
-		goto done;
-
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		if (enable)
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_enable(bank->dbck);
-		else
+	} else {
+		val &= ~l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
-done:
-	spin_unlock_irqrestore(&bank->lock, flags);
 }
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
-	struct gpio_bank *bank;
-	void __iomem *reg;
-
-	if (cpu_class_is_omap1())
-		return;
-
-	bank = get_gpio_bank(gpio);
-	reg = bank->base;
 
-	if (!bank->mod_usage) {
-		printk(KERN_ERR "GPIO not requested\n");
-		return;
-	}
-
-	enc_time &= 0xff;
-#ifdef CONFIG_ARCH_OMAP4
-	reg += OMAP4_GPIO_DEBOUNCINGTIME;
-#else
-	reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-#endif
-	__raw_writel(enc_time, reg);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
@@ -724,15 +717,27 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 							 OMAP4_GPIO_IRQWAKEN0);
 			}
 		} else {
-			if (trigger != 0)
+			/*
+			 * GPIO wakeup request can only be generated on edge
+			 * transitions
+			 */
+			if (trigger & IRQ_TYPE_EDGE_BOTH)
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
 			else
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
 		}
-	} else {
-		if (trigger != 0)
+	}
+	/* This part needs to be executed always for OMAP34xx */
+	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
 		else
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
@@ -750,6 +755,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 /*
  * This only applies to chips that can't do both rising and falling edge
  * detection at once.  For all other chips, this function is a noop.
@@ -760,11 +766,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 	u32 l = 0;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		break;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +791,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	__raw_writel(l, reg);
 }
+#endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
@@ -798,7 +803,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -812,7 +817,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -846,7 +851,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_7XX:
 		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -856,9 +861,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			goto bad;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		set_24xx_gpio_triggering(bank, gpio, trigger);
 		break;
 #endif
@@ -937,13 +942,13 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		reg += OMAP4_GPIO_IRQSTATUS0;
 		break;
 #endif
@@ -954,12 +959,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	__raw_writel(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
+	else if (cpu_is_omap44xx())
+		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+
 	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		__raw_writel(gpio_mask, reg);
 
@@ -1008,14 +1012,14 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		reg += OMAP4_GPIO_IRQSTATUSSET0;
 		mask = 0xffffffff;
 		break;
@@ -1077,7 +1081,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -1087,7 +1091,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		if (enable)
 			reg += OMAP4_GPIO_IRQSTATUSSET0;
 		else
@@ -1131,9 +1135,9 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 	case METHOD_GPIO_24XX:
+	case METHOD_GPIO_44XX:
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
 					"non-wakeup GPIO%d\n",
@@ -1201,11 +1205,17 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 #endif
 	if (!cpu_class_is_omap1()) {
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-			ctrl &= 0xFFFFFFFE;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is enabled, clocks are not gated */
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
 		}
 		bank->mod_usage |= 1 << offset;
 	}
@@ -1227,22 +1237,34 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
 	if (!cpu_class_is_omap1()) {
 		bank->mod_usage &= ~(1 << offset);
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is disabled, clocks are gated */
 			ctrl |= 1;
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			__raw_writel(ctrl, reg);
 		}
 	}
 	_reset_gpio(bank, bank->chip.base + offset);
@@ -1286,12 +1308,12 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_7XX)
 		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-	if (bank->method == METHOD_GPIO_24XX)
+	if (bank->method == METHOD_GPIO_44XX)
 		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
 	while(1) {
@@ -1573,6 +1595,12 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
 	}
 	return __raw_readl(reg) & mask;
 }
@@ -1608,6 +1636,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 	return 0;
 }
 
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+		unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, debounce);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_bank *bank;
@@ -1630,7 +1672,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 /*---------------------------------------------------------------------*/
 
 static int initialized;
-#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
+#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 static struct clk * gpio_ick;
 #endif
 
@@ -1756,7 +1798,7 @@ static int __init _omap_gpio_init(void)
 		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 	if (cpu_is_omap242x()) {
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
@@ -1766,7 +1808,7 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_243x;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 	if (cpu_is_omap34xx()) {
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
@@ -1809,31 +1851,44 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
-		if (bank->method == METHOD_GPIO_24XX) {
+#ifdef CONFIG_ARCH_OMAP2PLUS
+		if ((bank->method == METHOD_GPIO_24XX) ||
+				(bank->method == METHOD_GPIO_44XX)) {
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
 			};
-		if (cpu_is_omap44xx()) {
-			__raw_writel(0xffffffff, bank->base +
+
+			if (cpu_is_omap44xx()) {
+				__raw_writel(0xffffffff, bank->base +
 						OMAP4_GPIO_IRQSTATUSCLR0);
-			__raw_writew(0x0015, bank->base +
+				__raw_writew(0x0015, bank->base +
 						OMAP4_GPIO_SYSCONFIG);
-			__raw_writel(0x00000000, bank->base +
+				__raw_writel(0x00000000, bank->base +
 						 OMAP4_GPIO_DEBOUNCENABLE);
-			/* Initialize interface clock ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-		} else {
-			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
-			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
-			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
-			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
-
-			/* Initialize interface clock ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-		}
-			if (i < ARRAY_SIZE(non_wakeup_gpios))
+				/*
+				 * Initialize interface clock ungated,
+				 * module enabled
+				 */
+				__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+			} else {
+				__raw_writel(0x00000000, bank->base +
+						OMAP24XX_GPIO_IRQENABLE1);
+				__raw_writel(0xffffffff, bank->base +
+						OMAP24XX_GPIO_IRQSTATUS1);
+				__raw_writew(0x0015, bank->base +
+						OMAP24XX_GPIO_SYSCONFIG);
+				__raw_writel(0x00000000, bank->base +
+						OMAP24XX_GPIO_DEBOUNCE_EN);
+
+				/*
+				 * Initialize interface clock ungated,
+				 * module enabled
+				 */
+				__raw_writel(0, bank->base +
+						OMAP24XX_GPIO_CTRL);
+			}
+			if (cpu_is_omap24xx() &&
+			    i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
@@ -1848,6 +1903,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
+		bank->chip.set_debounce = gpio_debounce;
 		bank->chip.set = gpio_set;
 		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
@@ -1903,8 +1959,7 @@ static int __init _omap_gpio_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 {
 	int i;
@@ -1927,7 +1982,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1935,7 +1990,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_24XX:
+		case METHOD_GPIO_44XX:
 			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
 			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
 			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
@@ -1975,14 +2030,14 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
 #endif
 #ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_24XX:
+		case METHOD_GPIO_44XX:
 			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
 			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
 			break;
@@ -2013,46 +2068,69 @@ static struct sys_device omap_gpio_device = {
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 
 static int workaround_enabled;
 
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
 {
 	int i, c = 0;
+	int min = 0;
 
-	/* Remove triggering for all non-wakeup GPIOs.  Otherwise spurious
-	 * IRQs will be generated.  See OMAP2420 Errata item 1.101. */
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l1, l2;
 
+		if (bank->dbck_enable_mask)
+			clk_disable(bank->dbck);
+
+		if (power_state > PWRDM_POWER_OFF)
+			continue;
+
+		/* If going to OFF, remove triggering for all
+		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+		 * generated.  See OMAP2420 Errata item 1.101. */
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		bank->saved_datain = __raw_readl(bank->base +
-							OMAP4_GPIO_DATAIN);
-		l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
-		l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+					OMAP24XX_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			bank->saved_datain = __raw_readl(bank->base +
+						OMAP4_GPIO_DATAIN);
+			l1 = __raw_readl(bank->base +
+						OMAP4_GPIO_FALLINGDETECT);
+			l2 = __raw_readl(bank->base +
+						OMAP4_GPIO_RISINGDETECT);
+		}
+
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
-		__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-#endif
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(l1, bank->base +
+					OMAP24XX_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base +
+					OMAP24XX_GPIO_RISINGDETECT);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+		}
+
 		c++;
 	}
 	if (!c) {
@@ -2062,38 +2140,48 @@ void omap2_gpio_prepare_for_retention(void)
 	workaround_enabled = 1;
 }
 
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
 {
 	int i;
+	int min = 0;
 
-	if (!workaround_enabled)
-		return;
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l, gen, gen0, gen1;
 
+		if (bank->dbck_enable_mask)
+			clk_enable(bank->dbck);
+
+		if (!workaround_enabled)
+			continue;
+
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-		__raw_writel(bank->saved_fallingdetect,
+
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(bank->saved_risingdetect,
+			__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		__raw_writel(bank->saved_fallingdetect,
+			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+		}
+
+		if (cpu_is_omap44xx()) {
+			__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP4_GPIO_FALLINGDETECT);
-		__raw_writel(bank->saved_risingdetect,
+			__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP4_GPIO_RISINGDETECT);
-		l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-#endif
+			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
+		}
+
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
 		l ^= bank->saved_datain;
-		l &= bank->non_wakeup_gpios;
+		l &= bank->enabled_non_wakeup_gpios;
 
 		/*
 		 * No need to generate IRQs for the rising edge for gpio IRQs
@@ -2113,30 +2201,36 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (gen) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | gen, bank->base +
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+				old0 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | gen, bank->base +
+				old1 = __raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-			old0 = __raw_readl(bank->base +
+				__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+				__raw_writel(old0, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+				__raw_writel(old1, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
+			}
+
+			if (cpu_is_omap44xx()) {
+				old0 = __raw_readl(bank->base +
 						OMAP4_GPIO_LEVELDETECT0);
-			old1 = __raw_readl(bank->base +
+				old1 = __raw_readl(bank->base +
 						OMAP4_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | l, bank->base +
+				__raw_writel(old0 | l, bank->base +
 						OMAP4_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | l, bank->base +
+				__raw_writel(old1 | l, bank->base +
 						OMAP4_GPIO_LEVELDETECT1);
-			__raw_writel(old0, bank->base +
+				__raw_writel(old0, bank->base +
 						OMAP4_GPIO_LEVELDETECT0);
-			__raw_writel(old1, bank->base +
+				__raw_writel(old1, bank->base +
 						OMAP4_GPIO_LEVELDETECT1);
-#endif
+			}
 		}
 	}
 
@@ -2144,7 +2238,7 @@ void omap2_gpio_resume_after_retention(void)
 
 #endif
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 /* save the registers of bank 2-6 */
 void omap_gpio_save_context(void)
 {
@@ -2175,10 +2269,6 @@ void omap_gpio_save_context(void)
 			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		gpio_context[i].dataout =
 			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
-		gpio_context[i].setwkuena =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
-		gpio_context[i].setdataout =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 
@@ -2211,10 +2301,6 @@ void omap_gpio_restore_context(void)
 				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(gpio_context[i].dataout,
 				bank->base + OMAP24XX_GPIO_DATAOUT);
-		__raw_writel(gpio_context[i].setwkuena,
-				bank->base + OMAP24XX_GPIO_SETWKUENA);
-		__raw_writel(gpio_context[i].setdataout,
-				bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 #endif
@@ -2240,8 +2326,7 @@ static int __init omap_gpio_sysinit(void)
 
 	mpuio_init();
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
 		if (ret == 0) {
 			ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -2255,111 +2340,3 @@ static int __init omap_gpio_sysinit(void)
 }
 
 arch_initcall(omap_gpio_sysinit);
-
-
-#ifdef	CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
-	unsigned	i, j, gpio;
-
-	for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank	*bank = gpio_bank + i;
-		unsigned		bankwidth = 16;
-		u32			mask = 1;
-
-		if (bank_is_mpuio(bank))
-			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
-			bankwidth = 32;
-
-		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
-			unsigned	irq, value, is_in, irqstat;
-			const char	*label;
-
-			label = gpiochip_is_requested(&bank->chip, j);
-			if (!label)
-				continue;
-
-			irq = bank->virtual_irq_start + j;
-			value = gpio_get_value(gpio);
-			is_in = gpio_is_input(bank, mask);
-
-			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d ", j);
-			else
-				seq_printf(s, "GPIO %3d ", gpio);
-			seq_printf(s, "(%-20.20s): %s %s",
-					label,
-					is_in ? "in " : "out",
-					value ? "hi"  : "lo");
-
-/* FIXME for at least omap2, show pullup/pulldown state */
-
-			irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
-		defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
-			if (is_in && ((bank->suspend_wakeup & mask)
-					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
-				char	*trigger = NULL;
-
-				switch (irqstat & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "bothedge";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "low";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "high";
-					break;
-				case IRQ_TYPE_NONE:
-					trigger = "(?)";
-					break;
-				}
-				seq_printf(s, ", irq-%d %-8s%s",
-						irq, trigger,
-						(bank->suspend_wakeup & mask)
-							? " wakeup" : "");
-			}
-#endif
-			seq_printf(s, "\n");
-		}
-
-		if (bank_is_mpuio(bank)) {
-			seq_printf(s, "\n");
-			gpio = 0;
-		}
-	}
-	return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
-	.open		= dbg_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init omap_gpio_debuginit(void)
-{
-	(void) debugfs_create_file("omap_gpio", S_IRUGO,
-					NULL, NULL, &debug_fops);
-	return 0;
-}
-late_initcall(omap_gpio_debuginit);
-#endif
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 33fff4e..eec2b49 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,14 +26,19 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
+
 #include <mach/irqs.h>
 #include <plat/mux.h>
+#include <plat/i2c.h>
+#include <plat/omap-pm.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
 #define OMAP2_I2C_BASE1		0x48070000
 #define OMAP2_I2C_BASE2		0x48072000
 #define OMAP2_I2C_BASE3		0x48060000
+#define OMAP4_I2C_BASE4		0x48350000
 
 static const char name[] = "i2c_omap";
 
@@ -50,11 +55,14 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
+#endif
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
 #endif
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
 #endif
 };
 
@@ -69,14 +77,17 @@ static struct resource i2c_resources[][2] = {
 		},					\
 	}
 
-static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
+static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
-	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
+	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
+#endif
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
+#if	defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
 #endif
 };
 
@@ -92,34 +103,89 @@ static int __init omap_i2c_nr_ports(void)
 		ports = 2;
 	else if (cpu_is_omap34xx())
 		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
 
 	return ports;
 }
 
-static int __init omap_i2c_add_bus(int bus_id)
+/* Shared between omap2 and 3 */
+static resource_size_t omap2_i2c_irq[3] __initdata = {
+	INT_24XX_I2C1_IRQ,
+	INT_24XX_I2C2_IRQ,
+	INT_34XX_I2C3_IRQ,
+};
+
+static resource_size_t omap4_i2c_irq[4] __initdata = {
+	OMAP44XX_IRQ_I2C1,
+	OMAP44XX_IRQ_I2C2,
+	OMAP44XX_IRQ_I2C3,
+	OMAP44XX_IRQ_I2C4,
+};
+
+static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
-	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pd;
 	struct resource *res;
-	resource_size_t base, irq;
 
-	pdev = &omap_i2c_devices[bus_id - 1];
+	pd = pdev->dev.platform_data;
+	res = pdev->resource;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[1].start = INT_I2C;
+	omap1_i2c_mux_pins(bus_id);
+
+	return platform_device_register(pdev);
+}
+
+static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
+{
+	struct resource *res;
+	resource_size_t *irq;
+
+	res = pdev->resource;
+
+	if (!cpu_is_omap44xx())
+		irq = omap2_i2c_irq;
+	else
+		irq = omap4_i2c_irq;
+
 	if (bus_id == 1) {
-		res = pdev->resource;
-		if (cpu_class_is_omap1()) {
-			base = OMAP1_I2C_BASE;
-			irq = INT_I2C;
-		} else {
-			base = OMAP2_I2C_BASE1;
-			irq = INT_24XX_I2C1_IRQ;
-		}
-		res[0].start = base;
-		res[0].end = base + OMAP_I2C_SIZE;
-		res[1].start = irq;
+		res[0].start = OMAP2_I2C_BASE1;
+		res[0].end = res[0].start + OMAP_I2C_SIZE;
+	}
+
+	res[1].start = irq[bus_id - 1];
+	omap2_i2c_mux_pins(bus_id);
+
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 */
+	if (cpu_is_omap34xx()) {
+		struct omap_i2c_bus_platform_data *pd;
+
+		pd = pdev->dev.platform_data;
+		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
 	}
 
 	return platform_device_register(pdev);
 }
 
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+
+	if (cpu_class_is_omap1())
+		return omap1_i2c_add_bus(pdev, bus_id);
+	else
+		return omap2_i2c_add_bus(pdev, bus_id);
+}
+
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options
@@ -140,8 +206,8 @@ static int __init omap_i2c_bus_setup(char *str)
 	get_options(str, 3, ints);
 	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
 		return 0;
-	i2c_rate[ints[1] - 1] = ints[2];
-	i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+	i2c_pdata[ints[1] - 1].clkrate = ints[2];
+	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
 
 	return 1;
 }
@@ -155,9 +221,9 @@ static int __init omap_register_i2c_bus_cmdline(void)
 {
 	int i, err = 0;
 
-	for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
-		if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
-			i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 			err = omap_i2c_add_bus(i + 1);
 			if (err)
 				goto out;
@@ -169,7 +235,7 @@ out:
 subsys_initcall(omap_register_i2c_bus_cmdline);
 
 /**
- * omap_plat_register_i2c_bus - register I2C bus with device descriptors
+ * omap_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
  * @clkrate: clock rate of the bus in kHz
  * @info: pointer into I2C device descriptor table or NULL
@@ -177,7 +243,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
  *
  * Returns 0 on success or an error code.
  */
-int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
@@ -191,9 +257,10 @@ int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
 			return err;
 	}
 
-	if (!i2c_rate[bus_id - 1])
-		i2c_rate[bus_id - 1] = clkrate;
-	i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+	if (!i2c_pdata[bus_id - 1].clkrate)
+		i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 
 	return omap_i2c_add_bus(bus_id);
 }
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f1..56e7f2e 100644
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
@@ -6,7 +6,7 @@ struct blizzard_platform_data {
 	void		(*power_down)(struct device *dev);
 	unsigned long	(*get_clock_rate)(struct device *dev);
 
-	unsigned	te_connected : 1;
+	unsigned	te_connected:1;
 };
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 35b36ca..bb937f3 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -25,17 +25,25 @@ struct omap_clk {
 		},			\
 	}
 
-
+/* Platform flags for the clkdev-OMAP integration code */
 #define CK_310		(1 << 0)
-#define CK_7XX		(1 << 1)
+#define CK_7XX		(1 << 1)	/* 7xx, 850 */
 #define CK_1510		(1 << 2)
-#define CK_16XX		(1 << 3)
-#define CK_243X		(1 << 4)
-#define CK_242X		(1 << 5)
-#define CK_343X		(1 << 6)
-#define CK_3430ES1	(1 << 7)
-#define CK_3430ES2	(1 << 8)
-#define CK_443X		(1 << 9)
+#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
+#define CK_242X		(1 << 4)
+#define CK_243X		(1 << 5)
+#define CK_3XXX		(1 << 6)	/* OMAP3 + AM3 common clocks*/
+#define CK_343X		(1 << 7)	/* OMAP34xx common clocks */
+#define CK_3430ES1	(1 << 8)	/* 34xxES1 only */
+#define CK_3430ES2	(1 << 9)	/* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505		(1 << 10)
+#define CK_3517		(1 << 11)
+#define CK_36XX		(1 << 12)	/* OMAP36xx/37xx-specific clocks */
+#define CK_443X		(1 << 13)
+
+#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
+
+
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 94fe2a0..dfc472c 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -1,9 +1,9 @@
 /*
- *  arch/arm/plat-omap/include/mach/clock.h
+ * OMAP clock: data structure definitions, function prototypes, shared macros
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -22,12 +22,13 @@ struct clockdomain;
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
-	void			(*find_idlest)(struct clk *, void __iomem **, u8 *);
-	void			(*find_companion)(struct clk *, void __iomem **, u8 *);
+	void			(*find_idlest)(struct clk *, void __iomem **,
+					       u8 *, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **,
+						  u8 *);
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-		defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 
 struct clksel_rate {
 	u32			val;
@@ -40,6 +41,50 @@ struct clksel {
 	const struct clksel_rate *rates;
 };
 
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @rate_tolerance: maximum variance allowed from target rate (in Hz)
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs)
+
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX @rate_tolerance should probably be deprecated - currently there
+ * don't seem to be any usecases for DPLL rounding that is not exact.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a differenct structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
 struct dpll_data {
 	void __iomem		*mult_div1_reg;
 	u32			mult_mask;
@@ -51,13 +96,12 @@ struct dpll_data {
 	unsigned int		rate_tolerance;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
+	u16			max_multiplier;
 	u8			last_rounded_n;
 	u8			min_divider;
 	u8			max_divider;
-	u32			max_tolerance;
-	u16			max_multiplier;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	u8			modes;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
 	u32			autoidle_mask;
@@ -66,6 +110,7 @@ struct dpll_data {
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
+	u8			flags;
 #  endif
 };
 
@@ -75,12 +120,10 @@ struct clk {
 	struct list_head	node;
 	const struct clkops	*ops;
 	const char		*name;
-	int			id;
 	struct clk		*parent;
 	struct list_head	children;
 	struct list_head	sibling;	/* node for children */
 	unsigned long		rate;
-	__u32			flags;
 	void __iomem		*enable_reg;
 	unsigned long		(*recalc)(struct clk *);
 	int			(*set_rate)(struct clk *, unsigned long);
@@ -88,9 +131,9 @@ struct clk {
 	void			(*init)(struct clk *);
 	__u8			enable_bit;
 	__s8			usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-		defined(CONFIG_ARCH_OMAP4)
 	u8			fixed_div;
+	u8			flags;
+#ifdef CONFIG_ARCH_OMAP2PLUS
 	void __iomem		*clksel_reg;
 	u32			clksel_mask;
 	const struct clksel	*clksel;
@@ -123,7 +166,7 @@ struct clk_functions {
 #endif
 };
 
-extern unsigned int mpurate;
+extern int mpurate;
 
 extern int clk_init(struct clk_functions *custom_clocks);
 extern void clk_preinit(struct clk *clk);
@@ -134,37 +177,34 @@ extern void propagate_rate(struct clk *clk);
 extern void recalculate_root_clocks(void);
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
 #ifdef CONFIG_CPU_FREQ
 extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
 extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #endif
+extern struct clk *omap_clk_get_by_name(const char *name);
 
 extern const struct clkops clkops_null;
 
+extern struct clk dummy_ck;
+
 /* Clock flags */
-/* bit 0 is free */
-#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
-/* bits 2-4 are free */
-#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 7)
-#define CLOCK_NO_IDLE_PARENT	(1 << 8)
-#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
-#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
-#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
-#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
-#define CLOCK_IN_OMAP4430	(1 << 13)
-#define ALWAYS_ENABLED		(1 << 14)
-/* bits 13-31 are currently free */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
 
 /* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-#define RATE_IN_4430            (1 << 5)
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index eb73482..ba0a6c0 100644
--- a/arch/arm/plat-omap/include/plat/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -4,7 +4,7 @@
  * OMAP2/3 clockdomain framework functions
  *
  * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -40,65 +40,95 @@
 #define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
 #define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
 
-/*
- * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
- * and sleepdeps added when a powerdomain should stay active in hwsup mode;
- * and conversely, removed when the powerdomain should be allowed to go
- * inactive in hwsup mode.
+/**
+ * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
+ * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
+ * @omap_chip: OMAP chip types that this autodep is valid on
+ *
+ * A clockdomain that should have wkdeps and sleepdeps added when a
+ * clockdomain should stay active in hwsup mode; and conversely,
+ * removed when the clockdomain should be allowed to go inactive in
+ * hwsup mode.
+ *
+ * Autodeps are deprecated and should be removed after
+ * omap_hwmod-based fine-grained module idle control is added.
  */
-struct clkdm_pwrdm_autodep {
-
+struct clkdm_autodep {
 	union {
-		/* Name of the powerdomain to add a wkdep/sleepdep on */
 		const char *name;
-
-		/* Powerdomain pointer (looked up at clkdm_init() time) */
-		struct powerdomain *ptr;
-	} pwrdm;
-
-	/* OMAP chip types that this clockdomain dep is valid on */
+		struct clockdomain *ptr;
+	} clkdm;
 	const struct omap_chip_id omap_chip;
+};
 
+/**
+ * struct clkdm_dep - encode dependencies between clockdomains
+ * @clkdm_name: clockdomain name
+ * @clkdm: pointer to the struct clockdomain of @clkdm_name
+ * @omap_chip: OMAP chip types that this dependency is valid on
+ * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
+ * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
+ *
+ * Statically defined.  @clkdm is resolved from @clkdm_name at runtime and
+ * should not be pre-initialized.
+ *
+ * XXX Should also include hardware (fixed) dependencies.
+ */
+struct clkdm_dep {
+	const char *clkdm_name;
+	struct clockdomain *clkdm;
+	atomic_t wkdep_usecount;
+	atomic_t sleepdep_usecount;
+	const struct omap_chip_id omap_chip;
 };
 
+/**
+ * struct clockdomain - OMAP clockdomain
+ * @name: clockdomain name
+ * @pwrdm: powerdomain containing this clockdomain
+ * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
+ * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
+ * @flags: Clockdomain capability flags
+ * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
+ * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
+ * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
+ * @omap_chip: OMAP chip types that this clockdomain is valid on
+ * @usecount: Usecount tracking
+ * @node: list_head to link all clockdomains together
+ */
 struct clockdomain {
-
-	/* Clockdomain name */
 	const char *name;
-
 	union {
-		/* Powerdomain enclosing this clockdomain */
 		const char *name;
-
-		/* Powerdomain pointer assigned at clkdm_register() */
 		struct powerdomain *ptr;
 	} pwrdm;
-
-	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
+	void __iomem *clkstctrl_reg;
 	const u16 clktrctrl_mask;
-
-	/* Clockdomain capability flags */
 	const u8 flags;
-
-	/* OMAP chip types that this clockdomain is valid on */
+	const u8 dep_bit;
+	struct clkdm_dep *wkdep_srcs;
+	struct clkdm_dep *sleepdep_srcs;
 	const struct omap_chip_id omap_chip;
-
-	/* Usecount tracking */
 	atomic_t usecount;
-
 	struct list_head node;
-
 };
 
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
-int clkdm_register(struct clockdomain *clkdm);
-int clkdm_unregister(struct clockdomain *clkdm);
+void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps);
 struct clockdomain *clkdm_lookup(const char *name);
 
 int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
 			void *user);
 struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
 
+int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
+int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
+int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
+
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
 void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
 
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 32c2227..d265018 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -31,27 +31,33 @@
 
 struct sys_timer;
 
-/* used by omap-smp.c and board-4430sdp.c */
-extern void __iomem *gic_cpu_base_addr;
-
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
-/* IO bases for various OMAP processors */
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
 struct omap_globals {
 	u32		class;		/* OMAP class to detect */
 	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;		/* SDRAM Controller */
-	void __iomem	*sms;		/* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;		/* System Control Module */
-	void __iomem	*prm;		/* Power and Reset Management */
-	void __iomem	*cm;		/* Clock Management */
-	void __iomem	*cm2;
+	unsigned long   sdrc;           /* SDRAM Controller */
+	unsigned long   sms;            /* SDRAM Memory Scheduler */
+	unsigned long   ctrl;           /* System Control Module */
+	unsigned long   prm;            /* Power and Reset Management */
+	unsigned long   cm;             /* Clock Management */
+	unsigned long   cm2;
+	unsigned long	uart1_phys;
+	unsigned long	uart2_phys;
+	unsigned long	uart3_phys;
+	unsigned long	uart4_phys;
 };
 
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_36xx(void);
 void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -59,6 +65,7 @@ void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
+void omap2_set_globals_uart(struct omap_globals *);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index a745d62..131bf40 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -160,6 +160,14 @@
 #define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
 #define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
 
+/* AM35XX only CONTROL_GENERAL register offsets */
+#define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
+#define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)
+#define AM35XX_CONTROL_DEVCONF3         (OMAP2_CONTROL_GENERAL + 0x0314)
+#define AM35XX_CONTROL_CBA_PRIORITY     (OMAP2_CONTROL_GENERAL + 0x0320)
+#define AM35XX_CONTROL_LVL_INTR_CLEAR   (OMAP2_CONTROL_GENERAL + 0x0324)
+#define AM35XX_CONTROL_IP_SW_RESET      (OMAP2_CONTROL_GENERAL + 0x0328)
+#define AM35XX_CONTROL_IPSS_CLK_CTRL    (OMAP2_CONTROL_GENERAL + 0x032C)
 
 /* 34xx PADCONF register offsets */
 #define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
@@ -196,6 +204,12 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
+/* 44xx control status register offset */
+#define OMAP44XX_CONTROL_STATUS		0x2c4
+
+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1			0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -241,6 +255,23 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ			(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
+
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
 
@@ -257,6 +288,32 @@
 #define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
 #define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
 
+/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT   1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT     2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT     3
+#define AM35XX_USBOTG_FCLK_SHIFT        8
+#define AM35XX_CPGMAC_FCLK_SHIFT        9
+#define AM35XX_VPFE_FCLK_SHIFT          10
+
+/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR	BIT(0)
+#define AM35XX_CPGMAC_C0_RX_PULSE_CLR	BIT(1)
+#define AM35XX_CPGMAC_C0_RX_THRESH_CLR	BIT(2)
+#define AM35XX_CPGMAC_C0_TX_PULSE_CLR	BIT(3)
+#define AM35XX_USBOTGSS_INT_CLR		BIT(4)
+#define AM35XX_VPFE_CCDC_VD0_INT_CLR	BIT(5)
+#define AM35XX_VPFE_CCDC_VD1_INT_CLR	BIT(6)
+#define AM35XX_VPFE_CCDC_VD2_INT_CLR	BIT(7)
+
+/*AM35XX CONTROL_IP_SW_RESET bits*/
+#define AM35XX_USBOTGSS_SW_RST		BIT(0)
+#define AM35XX_CPGMACSS_SW_RST		BIT(1)
+#define AM35XX_VPFE_VBUSP_SW_RST	BIT(2)
+#define AM35XX_HECC_SW_RST		BIT(3)
+#define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
+
 /*
  * CONTROL OMAP STATUS register to identify OMAP3 features
  */
@@ -292,8 +349,7 @@
 
 
 #ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-		defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP2PLUS
 extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index a162f58..7514174 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -31,6 +31,7 @@
 #define __ASM_ARCH_OMAP_CPU_H
 
 #include <linux/bitops.h>
+#include <plat/multi.h>
 
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
@@ -44,7 +45,7 @@
 int omap_type(void);
 
 struct omap_chip_id {
-	u8 oc;
+	u16 oc;
 	u8 type;
 };
 
@@ -76,75 +77,6 @@ unsigned int omap_rev(void);
 #define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
 
 /*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
  * cpu_is_omap7xx():	True for OMAP730, OMAP850
@@ -154,6 +86,7 @@ unsigned int omap_rev(void);
  * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
  * cpu_is_omap243x():	True for OMAP2430
  * cpu_is_omap343x():	True for OMAP3430
+ * cpu_is_omap443x():	True for OMAP4430
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
 
@@ -232,22 +165,26 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #endif
 
 #if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
 #  define cpu_is_omap24xx()		is_omap24xx()
+# endif
+# if defined (CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		is_omap242x()
+# endif
+# if defined (CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
 #  undef  cpu_is_omap34xx
 #  undef  cpu_is_omap343x
 #  define cpu_is_omap34xx()		is_omap34xx()
 #  define cpu_is_omap343x()		is_omap343x()
 # endif
 #else
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		1
 # endif
@@ -259,7 +196,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP34XX)
+# if defined(CONFIG_ARCH_OMAP3)
 #  undef  cpu_is_omap34xx
 #  define cpu_is_omap34xx()		1
 # endif
@@ -286,6 +223,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
+ * cpu_is_omap4430():	True for OMAP4430
  * cpu_is_omap3505():	True for OMAP3505
  * cpu_is_omap3517():	True for OMAP3517
  */
@@ -334,6 +272,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define cpu_is_omap3505()		0
 #define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
+#define cpu_is_omap4430()		0
 #define cpu_is_omap3630()		0
 
 /*
@@ -371,7 +310,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap1710()		is_omap1710()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP2)
 # undef  cpu_is_omap2420
 # undef  cpu_is_omap2422
 # undef  cpu_is_omap2423
@@ -382,7 +321,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap2430()		is_omap2430()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
 # undef cpu_is_omap3430
 # undef cpu_is_omap3503
 # undef cpu_is_omap3515
@@ -471,9 +410,12 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3430ES3_0		(1 << 5)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
 #define CHIP_IS_OMAP3630ES1		(1 << 7)
+#define CHIP_IS_OMAP4430ES1		(1 << 8)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
+#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1)
+
 /*
  * "GE" here represents "greater than or equal to" in terms of ES
  * levels.  So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
@@ -501,6 +443,7 @@ extern u32 omap3_features;
 #define OMAP3_HAS_SGX			BIT(2)
 #define OMAP3_HAS_NEON			BIT(3)
 #define OMAP3_HAS_ISP			BIT(4)
+#define OMAP3_HAS_192MHZ_CLK		BIT(5)
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
 static inline unsigned int omap3_has_ ##feat(void)	\
@@ -513,5 +456,6 @@ OMAP3_HAS_FEATURE(sgx, SGX)
 OMAP3_HAS_FEATURE(iva, IVA)
 OMAP3_HAS_FEATURE(neon, NEON)
 OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index c66e464..1c529ce 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -233,8 +233,12 @@ int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
 void dsi_bus_lock(void);
 void dsi_bus_unlock(void);
 int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd);
+int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
 int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
 int dsi_vc_send_null(int channel);
 int dsi_vc_send_bta_sync(int channel);
@@ -367,6 +371,10 @@ struct omap_overlay_manager {
 
 	int (*apply)(struct omap_overlay_manager *mgr);
 	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+	int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
+
+	int (*enable)(struct omap_overlay_manager *mgr);
+	int (*disable)(struct omap_overlay_manager *mgr);
 };
 
 struct omap_dss_device {
@@ -426,16 +434,11 @@ struct omap_dss_device {
 		int acb;	/* ac-bias pin frequency */
 
 		enum omap_panel_config config;
-
-		u8 recommended_bpp;
-
-		struct omap_dss_device *ctrl;
 	} panel;
 
 	struct {
 		u8 pixel_size;
 		struct rfbi_timings rfbi_timings;
-		struct omap_dss_device *panel;
 	} ctrl;
 
 	int reset_gpio;
@@ -460,49 +463,6 @@ struct omap_dss_device {
 
 	enum omap_dss_display_state state;
 
-	int (*enable)(struct omap_dss_device *dssdev);
-	void (*disable)(struct omap_dss_device *dssdev);
-
-	int (*suspend)(struct omap_dss_device *dssdev);
-	int (*resume)(struct omap_dss_device *dssdev);
-
-	void (*get_resolution)(struct omap_dss_device *dssdev,
-			u16 *xres, u16 *yres);
-	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
-
-	int (*check_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	void (*set_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	void (*get_timings)(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings);
-	int (*update)(struct omap_dss_device *dssdev,
-			       u16 x, u16 y, u16 w, u16 h);
-	int (*sync)(struct omap_dss_device *dssdev);
-	int (*wait_vsync)(struct omap_dss_device *dssdev);
-
-	int (*set_update_mode)(struct omap_dss_device *dssdev,
-			enum omap_dss_update_mode);
-	enum omap_dss_update_mode (*get_update_mode)
-		(struct omap_dss_device *dssdev);
-
-	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
-	int (*get_te)(struct omap_dss_device *dssdev);
-
-	u8 (*get_rotate)(struct omap_dss_device *dssdev);
-	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
-
-	bool (*get_mirror)(struct omap_dss_device *dssdev);
-	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
-
-	int (*run_test)(struct omap_dss_device *dssdev, int test);
-	int (*memory_read)(struct omap_dss_device *dssdev,
-			void *buf, size_t size,
-			u16 x, u16 y, u16 w, u16 h);
-
-	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
-	u32 (*get_wss)(struct omap_dss_device *dssdev);
-
 	/* platform specific  */
 	int (*platform_enable)(struct omap_dss_device *dssdev);
 	void (*platform_disable)(struct omap_dss_device *dssdev);
@@ -522,11 +482,17 @@ struct omap_dss_driver {
 	int (*resume)(struct omap_dss_device *display);
 	int (*run_test)(struct omap_dss_device *display, int test);
 
-	void (*setup_update)(struct omap_dss_device *dssdev,
-			u16 x, u16 y, u16 w, u16 h);
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)(
+			struct omap_dss_device *dssdev);
+
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
 
 	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
-	int (*wait_for_te)(struct omap_dss_device *dssdev);
+	int (*get_te)(struct omap_dss_device *dssdev);
 
 	u8 (*get_rotate)(struct omap_dss_device *dssdev);
 	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
@@ -537,6 +503,20 @@ struct omap_dss_driver {
 	int (*memory_read)(struct omap_dss_device *dssdev,
 			void *buf, size_t size,
 			u16 x, u16 y, u16 w, u16 h);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
 };
 
 int omap_dss_register_driver(struct omap_dss_driver *);
@@ -561,6 +541,10 @@ struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
 int omap_dss_get_num_overlays(void);
 struct omap_overlay *omap_dss_get_overlay(int num);
 
+void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres);
+int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev);
+
 typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
 int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
 int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
@@ -572,4 +556,35 @@ int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
 #define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
 #define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
 
+void omapdss_dsi_vc_enable_hs(int channel, bool enable);
+int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
+
+int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
+				    u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_dsi_update(struct omap_dss_device *dssdev,
+		int channel,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(int, void *), void *data);
+
+int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dsi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
+void dpi_set_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+int dpi_check_timings(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+
+int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
+
+int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
+void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
+int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
+		u16 *x, u16 *y, u16 *w, u16 *h);
+int omap_rfbi_update(struct omap_dss_device *dssdev,
+		u16 x, u16 y, u16 w, u16 h,
+		void (*callback)(void *), void *data);
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
new file mode 100644
index 0000000..1f767cb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dma-44xx.h
@@ -0,0 +1,147 @@
+/*
+ * OMAP4 SDMA channel definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+
+#define OMAP44XX_DMA_SYS_REQ0			2
+#define OMAP44XX_DMA_SYS_REQ1			3
+#define OMAP44XX_DMA_GPMC			4
+#define OMAP44XX_DMA_DSS_DISPC_REQ		6
+#define OMAP44XX_DMA_SYS_REQ2			7
+#define OMAP44XX_DMA_MCASP1_AXEVT		8
+#define OMAP44XX_DMA_ISS_REQ1			9
+#define OMAP44XX_DMA_ISS_REQ2			10
+#define OMAP44XX_DMA_MCASP1_AREVT		11
+#define OMAP44XX_DMA_ISS_REQ3			12
+#define OMAP44XX_DMA_ISS_REQ4			13
+#define OMAP44XX_DMA_DSS_RFBI_REQ		14
+#define OMAP44XX_DMA_SPI3_TX0			15
+#define OMAP44XX_DMA_SPI3_RX0			16
+#define OMAP44XX_DMA_MCBSP2_TX			17
+#define OMAP44XX_DMA_MCBSP2_RX			18
+#define OMAP44XX_DMA_MCBSP3_TX			19
+#define OMAP44XX_DMA_MCBSP3_RX			20
+#define OMAP44XX_DMA_C2C_SSCM_GPO0		21
+#define OMAP44XX_DMA_C2C_SSCM_GPO1		22
+#define OMAP44XX_DMA_SPI3_TX1			23
+#define OMAP44XX_DMA_SPI3_RX1			24
+#define OMAP44XX_DMA_I2C3_TX			25
+#define OMAP44XX_DMA_I2C3_RX			26
+#define OMAP44XX_DMA_I2C1_TX			27
+#define OMAP44XX_DMA_I2C1_RX			28
+#define OMAP44XX_DMA_I2C2_TX			29
+#define OMAP44XX_DMA_I2C2_RX			30
+#define OMAP44XX_DMA_MCBSP4_TX			31
+#define OMAP44XX_DMA_MCBSP4_RX			32
+#define OMAP44XX_DMA_MCBSP1_TX			33
+#define OMAP44XX_DMA_MCBSP1_RX			34
+#define OMAP44XX_DMA_SPI1_TX0			35
+#define OMAP44XX_DMA_SPI1_RX0			36
+#define OMAP44XX_DMA_SPI1_TX1			37
+#define OMAP44XX_DMA_SPI1_RX1			38
+#define OMAP44XX_DMA_SPI1_TX2			39
+#define OMAP44XX_DMA_SPI1_RX2			40
+#define OMAP44XX_DMA_SPI1_TX3			41
+#define OMAP44XX_DMA_SPI1_RX3			42
+#define OMAP44XX_DMA_SPI2_TX0			43
+#define OMAP44XX_DMA_SPI2_RX0			44
+#define OMAP44XX_DMA_SPI2_TX1			45
+#define OMAP44XX_DMA_SPI2_RX1			46
+#define OMAP44XX_DMA_MMC2_TX			47
+#define OMAP44XX_DMA_MMC2_RX			48
+#define OMAP44XX_DMA_UART1_TX			49
+#define OMAP44XX_DMA_UART1_RX			50
+#define OMAP44XX_DMA_UART2_TX			51
+#define OMAP44XX_DMA_UART2_RX			52
+#define OMAP44XX_DMA_UART3_TX			53
+#define OMAP44XX_DMA_UART3_RX			54
+#define OMAP44XX_DMA_UART4_TX			55
+#define OMAP44XX_DMA_UART4_RX			56
+#define OMAP44XX_DMA_MMC4_TX			57
+#define OMAP44XX_DMA_MMC4_RX			58
+#define OMAP44XX_DMA_MMC5_TX			59
+#define OMAP44XX_DMA_MMC5_RX			60
+#define OMAP44XX_DMA_MMC1_TX			61
+#define OMAP44XX_DMA_MMC1_RX			62
+#define OMAP44XX_DMA_SYS_REQ3			64
+#define OMAP44XX_DMA_MCPDM_UP			65
+#define OMAP44XX_DMA_MCPDM_DL			66
+#define OMAP44XX_DMA_DMIC_REQ			67
+#define OMAP44XX_DMA_C2C_SSCM_GPO2		68
+#define OMAP44XX_DMA_C2C_SSCM_GPO3		69
+#define OMAP44XX_DMA_SPI4_TX0			70
+#define OMAP44XX_DMA_SPI4_RX0			71
+#define OMAP44XX_DMA_DSS_DSI1_REQ0		72
+#define OMAP44XX_DMA_DSS_DSI1_REQ1		73
+#define OMAP44XX_DMA_DSS_DSI1_REQ2		74
+#define OMAP44XX_DMA_DSS_DSI1_REQ3		75
+#define OMAP44XX_DMA_DSS_HDMI_REQ		76
+#define OMAP44XX_DMA_MMC3_TX			77
+#define OMAP44XX_DMA_MMC3_RX			78
+#define OMAP44XX_DMA_USIM_TX			79
+#define OMAP44XX_DMA_USIM_RX			80
+#define OMAP44XX_DMA_DSS_DSI2_REQ0		81
+#define OMAP44XX_DMA_DSS_DSI2_REQ1		82
+#define OMAP44XX_DMA_DSS_DSI2_REQ2		83
+#define OMAP44XX_DMA_DSS_DSI2_REQ3		84
+#define OMAP44XX_DMA_SLIMBUS1_TX0		85
+#define OMAP44XX_DMA_SLIMBUS1_TX1		86
+#define OMAP44XX_DMA_SLIMBUS1_TX2		87
+#define OMAP44XX_DMA_SLIMBUS1_TX3		88
+#define OMAP44XX_DMA_SLIMBUS1_RX0		89
+#define OMAP44XX_DMA_SLIMBUS1_RX1		90
+#define OMAP44XX_DMA_SLIMBUS1_RX2		91
+#define OMAP44XX_DMA_SLIMBUS1_RX3		92
+#define OMAP44XX_DMA_SLIMBUS2_TX0		93
+#define OMAP44XX_DMA_SLIMBUS2_TX1		94
+#define OMAP44XX_DMA_SLIMBUS2_TX2		95
+#define OMAP44XX_DMA_SLIMBUS2_TX3		96
+#define OMAP44XX_DMA_SLIMBUS2_RX0		97
+#define OMAP44XX_DMA_SLIMBUS2_RX1		98
+#define OMAP44XX_DMA_SLIMBUS2_RX2		99
+#define OMAP44XX_DMA_SLIMBUS2_RX3		100
+#define OMAP44XX_DMA_ABE_REQ_0			101
+#define OMAP44XX_DMA_ABE_REQ_1			102
+#define OMAP44XX_DMA_ABE_REQ_2			103
+#define OMAP44XX_DMA_ABE_REQ_3			104
+#define OMAP44XX_DMA_ABE_REQ_4			105
+#define OMAP44XX_DMA_ABE_REQ_5			106
+#define OMAP44XX_DMA_ABE_REQ_6			107
+#define OMAP44XX_DMA_ABE_REQ_7			108
+#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ		109
+#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ		110
+#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ	111
+#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ		112
+#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ		113
+#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ	114
+#define OMAP44XX_DMA_DES_P_CTX_IN_REQ		115
+#define OMAP44XX_DMA_DES_P_DATA_IN_REQ		116
+#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ		117
+#define OMAP44XX_DMA_SHA2_CTXIN_P		118
+#define OMAP44XX_DMA_SHA2_DIN_P			119
+#define OMAP44XX_DMA_SHA2_CTXOUT_P		120
+#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ	121
+#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ	122
+#define OMAP44XX_DMA_I2C4_TX			124
+#define OMAP44XX_DMA_I2C4_RX			125
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 4ede9e1..02232ca 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -21,6 +21,9 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
+
 /* Hardware registers for omap1 */
 #define OMAP1_DMA_BASE			(0xfffed800)
 
@@ -316,89 +319,6 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
-/* DMA request lines for 44xx */
-#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
-#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
-#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
-#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
-#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
-#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
-#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
-#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
-#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
-#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
-#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
-#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
-#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
-#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
-#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
-#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
-#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
-#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
-#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
-#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
-#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
-#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
-#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
-#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
-#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
-#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
-#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
-#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
-#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
-#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
-#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
-#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
-#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
-#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
-#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
-#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
-#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
-
 /*----------------------------------------------------------------------------*/
 
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
new file mode 100644
index 0000000..3e63270
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -0,0 +1,16 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+extern void omap1_set_vpp(struct map_info *map, int enable);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de7c547..de1c604 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -72,8 +72,8 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 extern void omap_gpio_save_context(void);
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index e081338..145838a 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -27,6 +27,8 @@
 
 #define GPMC_CONFIG		0x50
 #define GPMC_STATUS		0x54
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS_SIZE		0x30
 
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
@@ -110,6 +112,6 @@ extern void gpmc_prefetch_reset(void);
 extern int gpmc_prefetch_status(void);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern void __init gpmc_init(void);
+extern void gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 585d9ca..87f6bf2 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -34,6 +34,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
-int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
+void __init omap1_i2c_mux_pins(int bus_id);
+void __init omap2_i2c_mux_pins(int bus_id);
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index a3e7b47..128b549 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -158,10 +158,6 @@
  * VPOM3430 was not working for Int controller
  */
 
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE	/* 0x48300000 --> 0xfa300000 */
-#define L4_WK_34XX_VIRT		(L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_34XX_SIZE		SZ_1M
-
 #define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
 						/* 0x49000000 --> 0xfb000000 */
 #define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
@@ -204,11 +200,6 @@
 #define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_44XX_SIZE		SZ_4M
 
-
-#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE	/* 0x4a300000 --> 0xfc300000 */
-#define L4_WK_44XX_VIRT		(L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_44XX_SIZE		SZ_1M
-
 #define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
 						/* 0x48000000 --> 0xfa000000 */
 #define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
@@ -268,7 +259,38 @@ struct omap_sdrc_params;
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
-extern void omap2_map_common_io(void);
+#ifdef CONFIG_ARCH_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
 extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1);
 
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
new file mode 100644
index 0000000..518322c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irqs-44xx.h
@@ -0,0 +1,144 @@
+/*
+ * OMAP4 Interrupt lines definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+
+/* OMAP44XX IRQs numbers definitions */
+#define OMAP44XX_IRQ_LOCALTIMER			29
+#define OMAP44XX_IRQ_LOCALWDT			30
+
+#define OMAP44XX_IRQ_GIC_START			32
+
+#define OMAP44XX_IRQ_PL310			(0 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI0			(1 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI1			(2 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ELM			(4 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_1N			(7 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SECURITY_EVENTS		(8 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_DBG			(9 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_APP			(10 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PRCM			(11 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_0			(12 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_1			(13 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_2			(14 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_3			(15 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP4			(16 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP1			(17 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_MCU			(18 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_CORE			(19 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPMC			(20 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GFX			(21 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP2			(22 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP3			(23 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ISS_5			(24 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DISPC			(25 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MAIL_U0			(26 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_0			(27 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TESLA_MMU			(28 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO1			(29 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO2			(30 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO3			(31 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO4			(32 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO5			(33 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO6			(34 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_USIM			(35 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT3			(36 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT1			(37 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT2			(38 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT3			(39 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT4			(40 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT5			(41 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT6			(42 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT7			(43 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT8			(44 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT9			(45 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT10			(46 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT11			(47 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI4			(48 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_S			(49 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S		(50 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_P			(51 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_RNG			(52 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI1			(53 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C1			(56 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C2			(57 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HDQ			(58 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC5			(59 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C3			(61 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C4			(62 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_S			(63 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_P			(64 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI1			(65 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI2			(66 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P1			(67 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P2			(68 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FDIF_3			(69 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART4			(70 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_DMA			(71 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART1			(72 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART2			(73 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART3			(74 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PBIAS			(75 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_OHCI			(76 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EHCI			(77 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TLL			(78 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_S			(79 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT2			(80 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_S			(81 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_P			(82 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC1			(83 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI2			(84 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_P			(85 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC2			(86 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MPU_ICR			(87 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_1			(88 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB			(89 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB_SMI			(90 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI3			(91 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_MC_N		(92 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_DMA_N		(93 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC3			(94 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT12			(95 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC4			(96 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS1			(97 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS2			(98 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ABE			(99 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DUCATI_MMU			(100 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_HDMI			(101 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_IVA			(102 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1	(103 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0	(104 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0	(107 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AR			(108 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AX			(109 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_1			(110 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_2			(111 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCPDM			(112 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMM			(113 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMIC			(114 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_0			(115 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_1			(116 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_2			(117 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_3			(118 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_2N			(119 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_KBD_CTL			(120 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UNIPRO1			(124 + OMAP44XX_IRQ_GIC_START)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c0ab7c8..c01d9f0 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -28,6 +28,9 @@
 #ifndef __ASM_ARCH_OMAP15XX_IRQS_H
 #define __ASM_ARCH_OMAP15XX_IRQS_H
 
+/* All OMAP4 specific defines are moved to irqs-44xx.h */
+#include "irqs-44xx.h"
+
 /*
  * IRQ numbers for interrupt handler 1
  *
@@ -342,97 +345,16 @@
 #define INT_34XX_MMC3_IRQ	94
 #define INT_34XX_GPT12_IRQ	95
 
-#define	INT_34XX_BENCH_MPU_EMUL	3
-
-
-#define IRQ_GIC_START		32
-#define INT_44XX_LOCALTIMER_IRQ	29
-#define INT_44XX_LOCALWDT_IRQ	30
-
-#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
-#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
-#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
-#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
-#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
-#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
-#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
-#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
-#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
-#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
-#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
-#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
-#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
-#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
-#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
-#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
-#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
-#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
-#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
-#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
-#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
-#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
-#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
-
-#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
-#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
-#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
-
-#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
-#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
-#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
-#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
-#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
-#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
-#define INT_44XX_MMC5_IRQ	(59 + IRQ_GIC_START)
-#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
-#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
-#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
-#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
-#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
-#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
-#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
-#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
-#define INT_44XX_MMC4_IRQ	(96 + IRQ_GIC_START)
-
+#define INT_35XX_HECC0_IRQ		24
+#define INT_35XX_HECC1_IRQ		28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ	68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ	69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ	70
+#define INT_35XX_USBOTG_IRQ		71
+#define INT_35XX_CCDC_VD0_IRQ		88
+#define INT_35XX_CCDC_VD1_IRQ		92
+#define INT_35XX_CCDC_VD2_IRQ		93
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
  * 16 MPUIO lines */
@@ -506,4 +428,8 @@ void omap3_intc_resume_idle(void);
 
 #include <mach/hardware.h>
 
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 4f22e5b..975744f 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -49,6 +49,9 @@
 
 #define OMAP34XX_MCBSP1_BASE	0x48074000
 #define OMAP34XX_MCBSP2_BASE	0x49022000
+#define OMAP34XX_MCBSP2_ST_BASE	0x49028000
+#define OMAP34XX_MCBSP3_BASE	0x49024000
+#define OMAP34XX_MCBSP3_ST_BASE	0x4902A000
 #define OMAP34XX_MCBSP3_BASE	0x49024000
 #define OMAP34XX_MCBSP4_BASE	0x49026000
 #define OMAP34XX_MCBSP5_BASE	0x48096000
@@ -56,7 +59,7 @@
 #define OMAP44XX_MCBSP1_BASE	0x49022000
 #define OMAP44XX_MCBSP2_BASE	0x49024000
 #define OMAP44XX_MCBSP3_BASE	0x49026000
-#define OMAP44XX_MCBSP4_BASE	0x48074000
+#define OMAP44XX_MCBSP4_BASE	0x48096000
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 
@@ -103,8 +106,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-	defined(CONFIG_ARCH_OMAP4)
+#else
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
@@ -147,6 +149,17 @@
 #define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
+#define OMAP_MCBSP_REG_XBUFFSTAT	0xB4
+#define OMAP_MCBSP_REG_RBUFFSTAT	0xB8
+#define OMAP_MCBSP_REG_SSELCR	0xBC
+
+#define OMAP_ST_REG_REV		0x00
+#define OMAP_ST_REG_SYSCONFIG	0x10
+#define OMAP_ST_REG_IRQSTATUS	0x18
+#define OMAP_ST_REG_IRQENABLE	0x1C
+#define OMAP_ST_REG_SGAINCR	0x24
+#define OMAP_ST_REG_SFIRCR	0x28
+#define OMAP_ST_REG_SSELCR	0x2C
 
 #define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
@@ -265,6 +278,24 @@
 #define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
 
+/********************** McBSP SSELCR bit definitions ***********************/
+#define SIDETONEEN		0x0400
+
+/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/
+#define ST_AUTOIDLE		0x0001
+
+/********************** McBSP Sidetone SGAINCR bit definitions *************/
+#define ST_CH1GAIN(value)	((value<<16))	/* Bits 16:31 */
+#define ST_CH0GAIN(value)	(value)		/* Bits 0:15 */
+
+/********************** McBSP Sidetone SFIRCR bit definitions **************/
+#define ST_FIRCOEFF(value)	(value)		/* Bits 0:15 */
+
+/********************** McBSP Sidetone SSELCR bit definitions **************/
+#define ST_COEFFWRDONE		0x0004
+#define ST_COEFFWREN		0x0002
+#define ST_SIDETONEEN		0x0001
+
 /********************** McBSP DMA operating modes **************************/
 #define MCBSP_DMA_MODE_ELEMENT		0
 #define MCBSP_DMA_MODE_THRESHOLD	1
@@ -374,11 +405,23 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+	/* Sidetone block for McBSP 2 and 3 */
+	unsigned long phys_base_st;
 	u16 buffer_size;
 #endif
 };
 
+struct omap_mcbsp_st_data {
+	void __iomem *io_base_st;
+	bool running;
+	bool enabled;
+	s16 taps[128];	/* Sidetone filter coefficients */
+	int nr_taps;	/* Number of filter coefficients in use */
+	s16 ch0gain;
+	s16 ch1gain;
+};
+
 struct omap_mcbsp {
 	struct device *dev;
 	unsigned long phys_base;
@@ -410,24 +453,28 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+	struct omap_mcbsp_st_data *st_data;
 	int dma_op_mode;
 	u16 max_tx_thres;
 	u16 max_rx_thres;
 #endif
+	void *reg_cache;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count;
+extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+u16 omap_mcbsp_get_tx_delay(unsigned int id);
+u16 omap_mcbsp_get_rx_delay(unsigned int id);
 int omap_mcbsp_get_dma_op_mode(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
@@ -436,6 +483,8 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
 static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
@@ -459,4 +508,21 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
+#ifdef CONFIG_ARCH_OMAP3
+/* Sidetone specific API */
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
+int omap_st_enable(unsigned int id);
+int omap_st_disable(unsigned int id);
+int omap_st_is_enabled(unsigned int id);
+#else
+static inline int omap_st_set_chgain(unsigned int id, int channel,
+				     s16 chgain) { return 0; }
+static inline int omap_st_get_chgain(unsigned int id, int channel,
+				     s16 *chgain) { return 0; }
+static inline int omap_st_enable(unsigned int id) { return 0; }
+static inline int omap_st_disable(unsigned int id) { return 0; }
+static inline int omap_st_is_enabled(unsigned int id) {  return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index 3325f7b..d5306be 100644
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -38,8 +38,7 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
+#else
 #define PHYS_OFFSET		UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf6..4a970ec 100644
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
@@ -40,7 +40,7 @@ extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
 
 extern int menelaus_set_regulator_sleep(int enable, u32 val);
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
 #define omap_has_menelaus()	1
 #else
 #define omap_has_menelaus()	0
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 2993713..c835f1e 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -55,12 +55,12 @@ struct omap_mmc_platform_data {
 	unsigned int max_freq;
 
 	/* switch the bus to a new slot */
-	int (* switch_slot)(struct device *dev, int slot);
+	int (*switch_slot)(struct device *dev, int slot);
 	/* initialize board-specific MMC functionality, can be NULL if
 	 * not supported */
-	int (* init)(struct device *dev);
-	void (* cleanup)(struct device *dev);
-	void (* shutdown)(struct device *dev);
+	int (*init)(struct device *dev);
+	void (*cleanup)(struct device *dev);
+	void (*shutdown)(struct device *dev);
 
 	/* To handle board related suspend/resume functionality for MMC */
 	int (*suspend)(struct device *dev, int slot);
@@ -96,14 +96,32 @@ struct omap_mmc_platform_data {
 		/* Try to sleep or power off when possible */
 		unsigned power_saving:1;
 
+		/* If using power_saving and the MMC power is not to go off */
+		unsigned no_off:1;
+
+		/* Regulator off remapped to sleep */
+		unsigned vcc_aux_disable_is_sleep:1;
+
+		/* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS		(1 << 0)
+		unsigned features;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
-		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
-		int (* get_ro)(struct device *dev, int slot);
+		int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (*set_power)(struct device *dev, int slot,
+				 int power_on, int vdd);
+		int (*get_ro)(struct device *dev, int slot);
 		int (*set_sleep)(struct device *dev, int slot, int sleep,
 				 int vdd, int cardsleep);
+		void (*remux)(struct device *dev, int slot, int power_on);
+		/* Call back before enabling / disabling regulators */
+		void (*before_set_reg)(struct device *dev, int slot,
+				       int power_on, int vdd);
+		/* Call back after enabling / disabling regulators */
+		void (*after_set_reg)(struct device *dev, int slot,
+				      int power_on, int vdd);
 
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
@@ -111,14 +129,14 @@ struct omap_mmc_platform_data {
 		 *   0 - closed
 		 *   1 - open
 		 */
-		int (* get_cover_state)(struct device *dev, int slot);
+		int (*get_cover_state)(struct device *dev, int slot);
 
 		const char *name;
 		u32 ocr_mask;
 
 		/* Card detection IRQs */
 		int card_detect_irq;
-		int (* card_detect)(int irq);
+		int (*card_detect)(struct device *dev, int slot);
 
 		unsigned int ban_openended:1;
 
@@ -126,7 +144,8 @@ struct omap_mmc_platform_data {
 };
 
 /* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+					int is_closed);
 
 #if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
 	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
new file mode 100644
index 0000000..ffd909f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -0,0 +1,102 @@
+/*
+ * Support for compiling in multiple OMAP processors
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PLAT_OMAP_MULTI_H
+#define __PLAT_OMAP_MULTI_H
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
+# endif
+#endif
+
+#endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 692c90e..c7472a2 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -135,7 +135,7 @@ struct pin_config {
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 631a7be..f8efd546 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -15,10 +15,25 @@ struct omap_nand_platform_data {
 	int			cs;
 	int			gpio_irq;
 	struct mtd_partition	*parts;
+	struct gpmc_timings	*gpmc_t;
 	int			nr_parts;
-	int			(*nand_setup)(void __iomem *);
+	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	unsigned long		phys_base;
 	void __iomem		*gpmc_cs_baseaddr;
 	void __iomem		*gpmc_baseaddr;
+	int			devsize;
 };
+
+/* size (4 KiB) for IO mapping */
+#define	NAND_IO_SIZE	SZ_4K
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+	return 0;
+}
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 7560b4d..e69e1d8 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -125,43 +125,43 @@
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
 /* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP_UART3_BASE + 0)
-#define UART3_THR               (OMAP_UART3_BASE + 0)
-#define UART3_DLL               (OMAP_UART3_BASE + 0)
-#define UART3_IER               (OMAP_UART3_BASE + 4)
-#define UART3_DLH               (OMAP_UART3_BASE + 4)
-#define UART3_IIR               (OMAP_UART3_BASE + 8)
-#define UART3_FCR               (OMAP_UART3_BASE + 8)
-#define UART3_EFR               (OMAP_UART3_BASE + 8)
-#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc..7055672 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -23,8 +23,8 @@
  *
  */
 
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
 
 /*
  * Please place only base defines here and put the rest in device
@@ -85,5 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#endif /* __ASM_ARCH_OMAP24XX_H */
+#endif /* __ASM_ARCH_OMAP2_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 077f059..98fc8b4 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -21,8 +21,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
 
 /*
  * Please place only base defines here and put the rest in device
@@ -82,5 +82,10 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#endif /* __ASM_ARCH_OMAP34XX_H */
+/* Security */
+#define OMAP34XX_SEC_BASE	(L4_34XX_BASE + 0xA0000)
+#define OMAP34XX_SEC_SHA1MD5_BASE	(OMAP34XX_SEC_BASE + 0x23000)
+#define OMAP34XX_SEC_AES_BASE	(OMAP34XX_SEC_BASE + 0x25000)
+
+#endif /* __ASM_ARCH_OMAP3_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index ef870de..8b3f12f 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -30,9 +30,10 @@
 #define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
 #define OMAP4430_CM2_BASE		0x4a008000
 #define OMAP4430_PRM_BASE		0x4a306000
+#define OMAP4430_PRCM_MPU_BASE		0x48243000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
-#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP443X_CTRL_BASE		0x4a100000
 #define OMAP44XX_IC_BASE		0x48200000
 #define OMAP44XX_IVA_INTC_BASE		0x40000000
 #define IRQ_SIR_IRQ			0x0040
@@ -40,9 +41,16 @@
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
 #define OMAP44XX_SCU_BASE		0x48240000
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_L2CACHE_BASE		0x48242000
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
+#define OMAP44XX_MCPDM_BASE		0x40132000
+#define OMAP44XX_MCPDM_L3_BASE		0x49032000
 
 #define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE		(L4_44XX_BASE + 0xAB000)
+
+#define OMAP4_MMU1_BASE			0x55082000
+#define OMAP4_MMU2_BASE			0x4A066000
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index dc1fac1..3694b62 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -62,6 +62,7 @@
  *
  */
 struct omap_device {
+	u32                             magic;
 	struct platform_device		pdev;
 	struct omap_hwmod		**hwmods;
 	struct omap_device_pm_latency	*pm_lats;
@@ -81,6 +82,7 @@ int omap_device_shutdown(struct platform_device *pdev);
 
 /* Core code interface */
 
+bool omap_device_is_valid(struct omap_device *od);
 int omap_device_count_resources(struct omap_device *od);
 int omap_device_fill_resources(struct omap_device *od, struct resource *res);
 
@@ -88,15 +90,16 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
 				      struct omap_hwmod *oh, void *pdata,
 				      int pdata_len,
 				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
+				      int pm_lats_cnt, int is_early_device);
 
 struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 struct omap_hwmod **oh, int oh_cnt,
 					 void *pdata, int pdata_len,
 					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt);
+					 int pm_lats_cnt, int is_early_device);
 
 int omap_device_register(struct omap_device *od);
+int omap_early_device_register(struct omap_device *od);
 
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -131,11 +134,15 @@ int omap_device_enable_clocks(struct omap_device *od);
  */
 struct omap_device_pm_latency {
 	u32 deactivate_lat;
+	u32 deactivate_lat_worst;
 	int (*deactivate_func)(struct omap_device *od);
 	u32 activate_lat;
+	u32 activate_lat_worst;
 	int (*activate_func)(struct omap_device *od);
+	u32 flags;
 };
 
+#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
 
 /* Get omap_device pointer from platform_device pointer */
 #define to_omap_device(x) container_of((x), struct omap_device, pdev)
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 3393325..0eccc09 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -4,7 +4,7 @@
  * Copyright (C) 2009 Nokia Corporation
  * Paul Walmsley
  *
- * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Created in collaboration with (alphabetical order): Benoît Cousson,
  * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
  * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
  *
@@ -33,25 +33,42 @@
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
 
 #include <linux/kernel.h>
+#include <linux/list.h>
 #include <linux/ioport.h>
-
 #include <plat/cpu.h>
 
 struct omap_device;
 
-/* OCP SYSCONFIG bit shifts/masks */
-#define SYSC_MIDLEMODE_SHIFT		12
-#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
-#define SYSC_CLOCKACTIVITY_SHIFT	8
-#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
-#define SYSC_SIDLEMODE_SHIFT		3
-#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
-#define SYSC_ENAWAKEUP_SHIFT		2
-#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
-#define SYSC_SOFTRESET_SHIFT		1
-#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
-#define SYSC_AUTOIDLE_SHIFT		0
-#define SYSC_AUTOIDLE_MASK		(1 << SYSC_AUTOIDLE_SHIFT)
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
+ * with the original PRCM protocol defined for OMAP2420
+ */
+#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
+#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
+#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
+#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_SHIFT	1
+#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
+#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_AUTOIDLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
+ * with the new PRCM protocol defined for new OMAP4 IPs.
+ */
+#define SYSC_TYPE2_SOFTRESET_SHIFT	0
+#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
+#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
+#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
+#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
+#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -62,7 +79,6 @@ struct omap_device;
 #define HWMOD_IDLEMODE_NO		(1 << 1)
 #define HWMOD_IDLEMODE_SMART		(1 << 2)
 
-
 /**
  * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
  * @name: name of the IRQ channel (module local name)
@@ -94,8 +110,7 @@ struct omap_hwmod_dma_info {
 /**
  * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
  * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clkdev_dev_id: opt clock: clkdev dev_id string
- * @clkdev_con_id: opt clock: clkdev con_id string
+ * @clk: opt clock: OMAP clock name
  * @_clk: pointer to the struct clk (filled in at runtime)
  *
  * The module's interface clock and main functional clock should not
@@ -103,8 +118,7 @@ struct omap_hwmod_dma_info {
  */
 struct omap_hwmod_opt_clk {
 	const char	*role;
-	const char	*clkdev_dev_id;
-	const char	*clkdev_con_id;
+	const char	*clk;
 	struct clk	*_clk;
 };
 
@@ -162,17 +176,15 @@ struct omap_hwmod_addr_space {
 #define OCP_USER_SDMA			(1 << 1)
 
 /* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST		(1 << 0)
-#define OCPIF_SWSUP_IDLE		(1 << 1)
-#define OCPIF_CAN_BURST			(1 << 2)
+#define OCPIF_SWSUP_IDLE		(1 << 0)
+#define OCPIF_CAN_BURST			(1 << 1)
 
 /**
  * struct omap_hwmod_ocp_if - OCP interface data
  * @master: struct omap_hwmod that initiates OCP transactions on this link
  * @slave: struct omap_hwmod that responds to OCP transactions on this link
  * @addr: address space associated with this link
- * @clkdev_dev_id: interface clock: clkdev dev_id string
- * @clkdev_con_id: interface clock: clkdev con_id string
+ * @clk: interface clock: OMAP clock name
  * @_clk: pointer to the interface struct clk (filled in at runtime)
  * @fw: interface firewall data
  * @addr_cnt: ARRAY_SIZE(@addr)
@@ -191,8 +203,7 @@ struct omap_hwmod_ocp_if {
 	struct omap_hwmod		*master;
 	struct omap_hwmod		*slave;
 	struct omap_hwmod_addr_space	*addr;
-	const char			*clkdev_dev_id;
-	const char			*clkdev_con_id;
+	const char			*clk;
 	struct clk			*_clk;
 	union {
 		struct omap_hwmod_omap2_firewall omap2;
@@ -236,7 +247,25 @@ struct omap_hwmod_ocp_if {
 #define CLOCKACT_TEST_NONE	0x3
 
 /**
- * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
+ * @midle_shift: Offset of the midle bit
+ * @clkact_shift: Offset of the clockactivity bit
+ * @sidle_shift: Offset of the sidle bit
+ * @enwkup_shift: Offset of the enawakeup bit
+ * @srst_shift: Offset of the softreset bit
+ * @autoidle_shift: Offset of the autoidle bit
+ */
+struct omap_hwmod_sysc_fields {
+	u8 midle_shift;
+	u8 clkact_shift;
+	u8 sidle_shift;
+	u8 enwkup_shift;
+	u8 srst_shift;
+	u8 autoidle_shift;
+};
+
+/**
+ * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
  * @rev_offs: IP block revision register offset (from module base addr)
  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
@@ -252,14 +281,22 @@ struct omap_hwmod_ocp_if {
  * been associated with the clocks marked in @clockact.  This field is
  * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
  *
+ * @sysc_fields: structure containing the offset positions of various bits in
+ * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
+ * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
+ * whether the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
+ * If the device follows a different scheme for the sysconfig register ,
+ * then this field has to be populated with the correct offset structure.
  */
-struct omap_hwmod_sysconfig {
+struct omap_hwmod_class_sysconfig {
 	u16 rev_offs;
 	u16 sysc_offs;
 	u16 syss_offs;
+	u16 sysc_flags;
 	u8 idlemodes;
-	u8 sysc_flags;
 	u8 clockact;
+	struct omap_hwmod_sysc_fields *sysc_fields;
 };
 
 /**
@@ -289,14 +326,12 @@ struct omap_hwmod_omap2_prcm {
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
+ * @clkctrl_reg: PRCM address of the clock control register
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
-	u32 module_offs;
-	u16 device_offs;
-	u8 submodule_wkdep_bit;
+	void __iomem	*clkctrl_reg;
+	u8		submodule_wkdep_bit;
 };
 
 
@@ -315,6 +350,8 @@ struct omap_hwmod_omap4_prcm {
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -322,6 +359,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
+#define HWMOD_NO_IDLEST				(1 << 6)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -352,19 +390,33 @@ struct omap_hwmod_omap4_prcm {
 #define _HWMOD_STATE_DISABLED			6
 
 /**
+ * struct omap_hwmod_class - the type of an IP block
+ * @name: name of the hwmod_class
+ * @sysc: device SYSCONFIG/SYSSTATUS register data
+ * @rev: revision of the IP class
+ *
+ * Represent the class of a OMAP hardware "modules" (e.g. timer,
+ * smartreflex, gpio, uart...)
+ */
+struct omap_hwmod_class {
+	const char				*name;
+	struct omap_hwmod_class_sysconfig	*sysc;
+	u32					rev;
+};
+
+/**
  * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
  * @name: name of the hwmod
+ * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
  * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
  * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
  * @prcm: PRCM data pertaining to this hwmod
- * @clkdev_dev_id: main clock: clkdev dev_id string
- * @clkdev_con_id: main clock: clkdev con_id string
+ * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
- * @sysconfig: device SYSCONFIG/SYSSTATUS register data
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
  * @_rt_va: cached register target start address (internal use)
@@ -383,16 +435,17 @@ struct omap_hwmod_omap4_prcm {
  * @omap_chip: OMAP chips this hwmod is present on
  * @node: list node for hwmod list (internal use)
  *
- * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
- * clock," which for our purposes is defined as "the functional clock needed
- * for register accesses to complete."  Modules may not have a main clock if
- * the interface clock also serves as a main clock.
+ * @main_clk refers to this module's "main clock," which for our
+ * purposes is defined as "the functional clock needed for register
+ * accesses to complete."  Modules may not have a main clock if the
+ * interface clock also serves as a main clock.
  *
  * Parameter names beginning with an underscore are managed internally by
  * the omap_hwmod code and should not be set during initialization.
  */
 struct omap_hwmod {
 	const char			*name;
+	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
 	struct omap_hwmod_irq_info	*mpu_irqs;
 	struct omap_hwmod_dma_info	*sdma_chs;
@@ -400,13 +453,11 @@ struct omap_hwmod {
 		struct omap_hwmod_omap2_prcm omap2;
 		struct omap_hwmod_omap4_prcm omap4;
 	}				prcm;
-	const char			*clkdev_dev_id;
-	const char			*clkdev_con_id;
+	const char			*main_clk;
 	struct clk			*_clk;
 	struct omap_hwmod_opt_clk	*opt_clks;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
-	struct omap_hwmod_sysconfig	*sysconfig;
 	void				*dev_attr;
 	u32				_sysc_cache;
 	void __iomem			*_rt_va;
@@ -441,6 +492,8 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh);
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 
@@ -465,4 +518,17 @@ int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
 
+int omap_hwmod_for_each_by_class(const char *classname,
+				 int (*fn)(struct omap_hwmod *oh,
+					   void *user),
+				 void *user);
+
+/*
+ * Chip variant-specific hwmod init routines - XXX should be converted
+ * to use initcalls once the initial boot ordering is straightened out
+ */
+extern int omap2420_hwmod_init(void);
+extern int omap2430_hwmod_init(void);
+extern int omap3xxx_hwmod_init(void);
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index 0b96005..fb6ec74 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -1,8 +1,8 @@
 /*
  * OMAP2/3 powerdomain control
  *
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -31,12 +31,16 @@
 #define PWRDM_MAX_PWRSTS	4
 
 /* Powerdomain allowable state bitfields */
+#define PWRSTS_ON		(1 << PWRDM_POWER_ON)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
 #define PWRSTS_OFF_RET		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_RET))
 
+#define PWRSTS_RET_ON		((1 << PWRDM_POWER_RET) | \
+				 (1 << PWRDM_POWER_ON))
+
 #define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
 
 
@@ -46,18 +50,24 @@
 					  * in MEM bank 1 position. This is
 					  * true for OMAP3430
 					  */
+#define PWRDM_HAS_LOWPOWERSTATECHANGE	(1 << 2) /*
+						  * support to transition from a
+						  * sleep state to a lower sleep
+						  * state without waking up the
+						  * powerdomain
+						  */
 
 /*
- * Number of memory banks that are power-controllable.	On OMAP3430, the
- * maximum is 4.
+ * Number of memory banks that are power-controllable.	On OMAP4430, the
+ * maximum is 5.
  */
-#define PWRDM_MAX_MEM_BANKS	4
+#define PWRDM_MAX_MEM_BANKS	5
 
 /*
  * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP3 is the worst case
+ * CORE powerdomain on OMAP4 is the worst case
  */
-#define PWRDM_MAX_CLKDMS	4
+#define PWRDM_MAX_CLKDMS	9
 
 /* XXX A completely arbitrary number. What is reasonable here? */
 #define PWRDM_TRANSITION_BAILOUT 100000
@@ -65,65 +75,40 @@
 struct clockdomain;
 struct powerdomain;
 
-/* Encodes dependencies between powerdomains - statically defined */
-struct pwrdm_dep {
-
-	/* Powerdomain name */
-	const char *pwrdm_name;
-
-	/* Powerdomain pointer - resolved by the powerdomain code */
-	struct powerdomain *pwrdm;
-
-	/* Flags to mark OMAP chip restrictions, etc. */
-	const struct omap_chip_id omap_chip;
-
-};
-
+/**
+ * struct powerdomain - OMAP powerdomain
+ * @name: Powerdomain name
+ * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @prcm_offs: the address offset from CM_BASE/PRM_BASE
+ * @pwrsts: Possible powerdomain power states
+ * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
+ * @flags: Powerdomain flags
+ * @banks: Number of software-controllable memory banks in this powerdomain
+ * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
+ * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
+ * @pwrdm_clkdms: Clockdomains in this powerdomain
+ * @node: list_head linking all powerdomains
+ * @state:
+ * @state_counter:
+ * @timer:
+ * @state_timer:
+ */
 struct powerdomain {
-
-	/* Powerdomain name */
 	const char *name;
-
-	/* the address offset from CM_BASE/PRM_BASE */
-	const s16 prcm_offs;
-
-	/* Used to represent the OMAP chip types containing this pwrdm */
 	const struct omap_chip_id omap_chip;
-
-	/* Powerdomains that can be told to wake this powerdomain up */
-	struct pwrdm_dep *wkdep_srcs;
-
-	/* Powerdomains that can be told to keep this pwrdm from inactivity */
-	struct pwrdm_dep *sleepdep_srcs;
-
-	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
-	const u8 dep_bit;
-
-	/* Possible powerdomain power states */
+	const s16 prcm_offs;
 	const u8 pwrsts;
-
-	/* Possible logic power states when pwrdm in RETENTION */
 	const u8 pwrsts_logic_ret;
-
-	/* Powerdomain flags */
 	const u8 flags;
-
-	/* Number of software-controllable memory banks in this powerdomain */
 	const u8 banks;
-
-	/* Possible memory bank pwrstates when pwrdm in RETENTION */
 	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
-
-	/* Possible memory bank pwrstates when pwrdm is ON */
 	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
-
-	/* Clockdomains in this powerdomain */
 	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
-
 	struct list_head node;
-
 	int state;
 	unsigned state_counter[PWRDM_MAX_PWRSTS];
+	unsigned ret_logic_off_counter;
+	unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
 
 #ifdef CONFIG_PM_DEBUG
 	s64 timer;
@@ -134,8 +119,6 @@ struct powerdomain {
 
 void pwrdm_init(struct powerdomain **pwrdm_list);
 
-int pwrdm_register(struct powerdomain *pwrdm);
-int pwrdm_unregister(struct powerdomain *pwrdm);
 struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
@@ -149,13 +132,6 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
 			 int (*fn)(struct powerdomain *pwrdm,
 				   struct clockdomain *clkdm));
 
-int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-
 int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
 
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
@@ -170,8 +146,10 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
 
 int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
 int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
 int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
 int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
 
 int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
 int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index e63e94e..9fbd914 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -24,8 +24,9 @@
 #define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
+void omap_prcm_arch_reset(char mode, const char *cmd);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+			 const char *name);
 
 #define START_PADCONF_SAVE 0x2
 #define PADCONF_SAVE_DONE  0x1
@@ -33,6 +34,14 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 void omap3_prcm_save_context(void);
 void omap3_prcm_restore_context(void);
 
+u32 prm_read_mod_reg(s16 module, u16 idx);
+void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 cm_read_mod_reg(s16 module, u16 idx);
+void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
 #endif
 
 
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index f5a4a92..19145f5 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,37 +15,79 @@
 
 #include <linux/init.h>
 
-#if defined(CONFIG_ARCH_OMAP1)
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO		(PHYS_OFFSET + 0x3ffc)
+
 /* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
+
 /* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#elif defined(CONFIG_ARCH_OMAP3)
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
 /* OMAP3 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP4)
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+
 /* OMAP4 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x48020000
-#define OMAP_UART4_BASE		0x4806e000
-#endif
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define OMAP7XX_PORT_SHIFT	0
+#define ZOOM_PORT_SHIFT		1
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
 
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1		11
+#define OMAP1UART2		12
+#define OMAP1UART3		13
+#define OMAP2UART1		21
+#define OMAP2UART2		22
+#define OMAP2UART3		23
+#define OMAP3UART1		OMAP2UART1
+#define OMAP3UART2		OMAP2UART2
+#define OMAP3UART3		33
+#define OMAP3UART4		34		/* Only on 36xx */
+#define OMAP4UART1		OMAP2UART1
+#define OMAP4UART2		OMAP2UART2
+#define OMAP4UART3		43
+#define OMAP4UART4		44
+#define ZOOM_UART		95		/* Only on zoom2/3 */
+
+/* This is only used by 8250.c for omap1510 */
 #define is_omap_port(pt)	({int __ret = 0;			\
-			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART2_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART3_BASE)	\
+			if ((pt)->port.mapbase == OMAP1_UART1_BASE ||	\
+			    (pt)->port.mapbase == OMAP1_UART2_BASE ||	\
+			    (pt)->port.mapbase == OMAP1_UART3_BASE)	\
 				__ret = 1;				\
 			__ret;						\
 			})
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c58a4ef..d0a119f 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -22,7 +22,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void omap1_arch_reset(char mode)
+static inline void omap1_arch_reset(char mode, const char *cmd)
 {
 	/*
 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -43,9 +43,9 @@ static inline void omap1_arch_reset(char mode)
 static inline void arch_reset(char mode, const char *cmd)
 {
 	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode);
+		omap1_arch_reset(mode, cmd);
 	else
-		omap_prcm_arch_reset(mode);
+		omap_prcm_arch_reset(mode, cmd);
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 13c305d..bbedd71 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,62 +19,32 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
 #include <plat/serial.h>
 
-unsigned int system_rev;
+static volatile u8 *uart_base;
+static int uart_shift;
 
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define OMAP_ID_850		0x362C
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+	*(volatile u32 *)OMAP_UART_INFO = port;
+}
 
 static void putc(int c)
 {
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
-	return;
-#else
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
-			shift = 0;
-
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
+	if (!uart_base)
 		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
 
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
 		barrier();
-	uart[UART_TX << shift] = c;
+	uart_base[UART_TX << uart_shift] = c;
 }
 
 static inline void flush(void)
@@ -82,7 +52,112 @@ static inline void flush(void)
 }
 
 /*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
+	if (machine_is_##mach()) {					\
+		uart_base = (volatile u8 *)(dbg_uart);			\
+		uart_shift = (dbg_shft);				\
+		port = (dbg_id);					\
+		set_omap_uart_info(port);				\
+		break;							\
+	}
+
+#define DEBUG_LL_OMAP7XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach)						\
+	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	int port = 0;
+
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* omap7xx/8xx based boards using UART1 with shift 0 */
+		DEBUG_LL_OMAP7XX(1, herald);
+		DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+		/* omap15xx/16xx based boards using UART1 */
+		DEBUG_LL_OMAP1(1, ams_delta);
+		DEBUG_LL_OMAP1(1, nokia770);
+		DEBUG_LL_OMAP1(1, omap_h2);
+		DEBUG_LL_OMAP1(1, omap_h3);
+		DEBUG_LL_OMAP1(1, omap_innovator);
+		DEBUG_LL_OMAP1(1, omap_osk);
+		DEBUG_LL_OMAP1(1, omap_palmte);
+		DEBUG_LL_OMAP1(1, omap_palmz71);
+
+		/* omap15xx/16xx based boards using UART2 */
+		DEBUG_LL_OMAP1(2, omap_palmtt);
+
+		/* omap15xx/16xx based boards using UART3 */
+		DEBUG_LL_OMAP1(3, sx1);
+
+		/* omap2 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap2evm);
+		DEBUG_LL_OMAP2(1, omap_2430sdp);
+		DEBUG_LL_OMAP2(1, omap_apollon);
+		DEBUG_LL_OMAP2(1, omap_h4);
+
+		/* omap2 based boards using UART3 */
+		DEBUG_LL_OMAP2(3, nokia_n800);
+		DEBUG_LL_OMAP2(3, nokia_n810);
+		DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+		/* omap3 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap3evm);
+		DEBUG_LL_OMAP3(1, omap_3430sdp);
+		DEBUG_LL_OMAP3(1, omap_3630sdp);
+
+		/* omap3 based boards using UART3 */
+		DEBUG_LL_OMAP3(3, cm_t35);
+		DEBUG_LL_OMAP3(3, igep0020);
+		DEBUG_LL_OMAP3(3, nokia_rx51);
+		DEBUG_LL_OMAP3(3, omap3517evm);
+		DEBUG_LL_OMAP3(3, omap3_beagle);
+		DEBUG_LL_OMAP3(3, omap3_pandora);
+		DEBUG_LL_OMAP3(3, omap_ldp);
+		DEBUG_LL_OMAP3(3, overo);
+		DEBUG_LL_OMAP3(3, touchbook);
+
+		/* omap4 based boards using UART3 */
+		DEBUG_LL_OMAP4(3, omap_4430sdp);
+
+		/* zoom2/3 external uart */
+		DEBUG_LL_ZOOM(omap_zoom2);
+		DEBUG_LL_ZOOM(omap_zoom3);
+
+	} while (0);
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+/*
  * nothing to do
  */
-#define arch_decomp_setup()
 #define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 33a500e..98eef53 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,6 +3,7 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
+#include <linux/usb/musb.h>
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
@@ -12,6 +13,20 @@ enum ehci_hcd_omap_mode {
 	EHCI_HCD_OMAP_MODE_TLL,
 };
 
+enum ohci_omap3_port_mode {
+	OMAP_OHCI_PORT_MODE_UNUSED,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+};
+
 struct ehci_hcd_omap_platform_data {
 	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			phy_reset:1;
@@ -20,6 +35,13 @@ struct ehci_hcd_omap_platform_data {
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
 };
 
+struct ohci_hcd_omap_platform_data {
+	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+};
+
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -42,9 +64,20 @@ struct ehci_hcd_omap_platform_data {
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-extern void usb_musb_init(void);
+struct omap_musb_board_data {
+	u8	interface_type;
+	u8	mode;
+	u16	power;
+	unsigned extvbus:1;
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+
+extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
-extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
 
 #endif
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 0cfd54f..b0078cf 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -90,8 +90,6 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
 		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
 			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
-		if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
-			return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
 		if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
 			return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
 		if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
@@ -110,8 +108,6 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
 		if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
 			return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
-		if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
-			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
 		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
 			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
 		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
@@ -128,7 +124,7 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
 	}
 #endif
-	return __arm_ioremap(p, size, type);
+	return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(omap_ioremap);
 
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index afd1c27..e6c0d53 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 463d638..bc094db 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -1,7 +1,7 @@
 /*
  * omap iommu: tlb and pagetable primitives
  *
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
  *		Paul Mundt and Toshihiro Kobayashi
@@ -13,6 +13,7 @@
 
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/clk.h>
@@ -24,6 +25,11 @@
 
 #include "iopgtable.h"
 
+#define for_each_iotlb_cr(obj, n, __i, cr)				\
+	for (__i = 0;							\
+	     (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true);	\
+	     __i++)
+
 /* accommodate the difference between omap1 and omap2/3 */
 static const struct iommu_functions *arch_iommu;
 
@@ -171,15 +177,12 @@ static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
 	l->base = MMU_LOCK_BASE(val);
 	l->vict = MMU_LOCK_VICT(val);
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
 }
 
 static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
 {
 	u32 val;
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
-
 	val = (l->base << MMU_LOCK_BASE_SHIFT);
 	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
 
@@ -213,6 +216,20 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
 	return arch_iommu->dump_cr(obj, cr, buf);
 }
 
+/* only used in iotlb iteration for-loop */
+static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n)
+{
+	struct cr_regs cr;
+	struct iotlb_lock l;
+
+	iotlb_lock_get(obj, &l);
+	l.vict = n;
+	iotlb_lock_set(obj, &l);
+	iotlb_read_cr(obj, &cr);
+
+	return cr;
+}
+
 /**
  * load_iotlb_entry - Set an iommu tlb entry
  * @obj:	target iommu
@@ -220,7 +237,6 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
  **/
 int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 {
-	int i;
 	int err = 0;
 	struct iotlb_lock l;
 	struct cr_regs *cr;
@@ -230,21 +246,30 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	iotlb_lock_get(obj, &l);
+	if (l.base == obj->nr_tlb_entries) {
+		dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+	if (!e->prsvd) {
+		int i;
 		struct cr_regs tmp;
 
+		for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
+			if (!iotlb_cr_valid(&tmp))
+				break;
+
+		if (i == obj->nr_tlb_entries) {
+			dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+			err = -EBUSY;
+			goto out;
+		}
+
 		iotlb_lock_get(obj, &l);
-		l.vict = i;
+	} else {
+		l.vict = l.base;
 		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
-		if (!iotlb_cr_valid(&tmp))
-			break;
-	}
-
-	if (i == obj->nr_tlb_entries) {
-		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
-		err = -EBUSY;
-		goto out;
 	}
 
 	cr = iotlb_alloc_cr(obj, e);
@@ -256,9 +281,11 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 	iotlb_load_cr(obj, cr);
 	kfree(cr);
 
+	if (e->prsvd)
+		l.base++;
 	/* increment victim for next tlb load */
 	if (++l.vict == obj->nr_tlb_entries)
-		l.vict = 0;
+		l.vict = l.base;
 	iotlb_lock_set(obj, &l);
 out:
 	clk_disable(obj->clk);
@@ -275,20 +302,15 @@ EXPORT_SYMBOL_GPL(load_iotlb_entry);
  **/
 void flush_iotlb_page(struct iommu *obj, u32 da)
 {
-	struct iotlb_lock l;
 	int i;
+	struct cr_regs cr;
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
-		struct cr_regs cr;
+	for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
 		u32 start;
 		size_t bytes;
 
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &cr);
 		if (!iotlb_cr_valid(&cr))
 			continue;
 
@@ -298,7 +320,6 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
@@ -369,26 +390,19 @@ EXPORT_SYMBOL_GPL(iommu_dump_ctx);
 static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
-	struct iotlb_lock saved, l;
+	struct iotlb_lock saved;
+	struct cr_regs tmp;
 	struct cr_regs *p = crs;
 
 	clk_enable(obj->clk);
-
 	iotlb_lock_get(obj, &saved);
-	memcpy(&l, &saved, sizeof(saved));
 
-	for (i = 0; i < num; i++) {
-		struct cr_regs tmp;
-
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
+	for_each_iotlb_cr(obj, num, i, tmp) {
 		if (!iotlb_cr_valid(&tmp))
 			continue;
-
 		*p++ = tmp;
 	}
+
 	iotlb_lock_set(obj, &saved);
 	clk_disable(obj->clk);
 
@@ -502,6 +516,12 @@ static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
 {
 	u32 *iopgd = iopgd_offset(obj, da);
 
+	if ((da | pa) & ~IOSECTION_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSECTION_SIZE);
+		return -EINVAL;
+	}
+
 	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
 	flush_iopgd_range(iopgd, iopgd);
 	return 0;
@@ -512,6 +532,12 @@ static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
 	u32 *iopgd = iopgd_offset(obj, da);
 	int i;
 
+	if ((da | pa) & ~IOSUPER_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSUPER_SIZE);
+		return -EINVAL;
+	}
+
 	for (i = 0; i < 16; i++)
 		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
 	flush_iopgd_range(iopgd, iopgd + 15);
@@ -541,6 +567,12 @@ static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
 	u32 *iopte = iopte_alloc(obj, iopgd, da);
 	int i;
 
+	if ((da | pa) & ~IOLARGE_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOLARGE_SIZE);
+		return -EINVAL;
+	}
+
 	if (IS_ERR(iopte))
 		return PTR_ERR(iopte);
 
@@ -646,7 +678,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		if (*iopte & IOPTE_LARGE) {
 			nent *= 16;
 			/* rewind to the 1st entry */
-			iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+			iopte = iopte_offset(iopgd, (da & IOLARGE_MASK));
 		}
 		bytes *= nent;
 		memset(iopte, 0, nent * sizeof(*iopte));
@@ -667,7 +699,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
 			nent *= 16;
 			/* rewind to the 1st entry */
-			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+			iopgd = iopgd_offset(obj, (da & IOSUPER_MASK));
 		}
 		bytes *= nent;
 	}
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
index 37dac43..ab23b6a 100644
--- a/arch/arm/plat-omap/iopgtable.h
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -1,7 +1,7 @@
 /*
  * omap iommu: pagetable definitions
  *
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *
@@ -13,26 +13,52 @@
 #ifndef __PLAT_OMAP_IOMMU_H
 #define __PLAT_OMAP_IOMMU_H
 
+/*
+ * "L2 table" address mask and size definitions.
+ */
 #define IOPGD_SHIFT		20
-#define IOPGD_SIZE		(1 << IOPGD_SHIFT)
+#define IOPGD_SIZE		(1UL << IOPGD_SHIFT)
 #define IOPGD_MASK		(~(IOPGD_SIZE - 1))
-#define IOSECTION_MASK		IOPGD_MASK
-#define PTRS_PER_IOPGD		(1 << (32 - IOPGD_SHIFT))
-#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
 
-#define IOSUPER_SIZE		(IOPGD_SIZE << 4)
+/*
+ * "section" address mask and size definitions.
+ */
+#define IOSECTION_SHIFT		20
+#define IOSECTION_SIZE		(1UL << IOSECTION_SHIFT)
+#define IOSECTION_MASK		(~(IOSECTION_SIZE - 1))
+
+/*
+ * "supersection" address mask and size definitions.
+ */
+#define IOSUPER_SHIFT		24
+#define IOSUPER_SIZE		(1UL << IOSUPER_SHIFT)
 #define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
 
+#define PTRS_PER_IOPGD		(1UL << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
+
+/*
+ * "small page" address mask and size definitions.
+ */
 #define IOPTE_SHIFT		12
-#define IOPTE_SIZE		(1 << IOPTE_SHIFT)
+#define IOPTE_SIZE		(1UL << IOPTE_SHIFT)
 #define IOPTE_MASK		(~(IOPTE_SIZE - 1))
-#define IOPAGE_MASK		IOPTE_MASK
-#define PTRS_PER_IOPTE		(1 << (IOPGD_SHIFT - IOPTE_SHIFT))
-#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
 
-#define IOLARGE_SIZE		(IOPTE_SIZE << 4)
+/*
+ * "large page" address mask and size definitions.
+ */
+#define IOLARGE_SHIFT		16
+#define IOLARGE_SIZE		(1UL << IOLARGE_SHIFT)
 #define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
 
+#define PTRS_PER_IOPTE		(1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOPAGE_MASK		IOPTE_MASK
+
+/*
+ * some descriptor attributes.
+ */
 #define IOPGD_TABLE		(1 << 0)
 #define IOPGD_SECTION		(2 << 0)
 #define IOPGD_SUPER		(1 << 18 | 2 << 0)
@@ -40,12 +66,14 @@
 #define IOPTE_SMALL		(2 << 0)
 #define IOPTE_LARGE		(1 << 0)
 
+/* to find an entry in a page-table-directory */
 #define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
 #define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
 
 #define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
 #define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
 
+/* to find an entry in the second-level page table. */
 #define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
 #define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 936aef1..8ce0de2 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/device.h>
 #include <linux/scatterlist.h>
@@ -139,8 +140,10 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 
@@ -286,16 +289,19 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
 	prev_end = 0;
 	list_for_each_entry(tmp, &obj->mmap, list) {
 
-		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+		if (prev_end >= start)
+			break;
+
+		if (start + bytes < tmp->da_start)
 			goto found;
 
 		if (flags & IOVMF_DA_ANON)
-			start = roundup(tmp->da_end, alignement);
+			start = roundup(tmp->da_end + 1, alignement);
 
 		prev_end = tmp->da_end;
 	}
 
-	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+	if ((start > prev_end) && (ULONG_MAX - start >= bytes))
 		goto found;
 
 	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 8e90633..08a2df7 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -25,9 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <plat/mailbox.h>
 
+static struct workqueue_struct *mboxd;
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
@@ -188,7 +190,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
 nomem:
-	schedule_work(&mbox->rxq->work);
+	queue_work(mboxd, &mbox->rxq->work);
 }
 
 static irqreturn_t mbox_interrupt(int irq, void *p)
@@ -401,12 +403,17 @@ EXPORT_SYMBOL(omap_mbox_unregister);
 
 static int __init omap_mbox_init(void)
 {
+	mboxd = create_workqueue("mboxd");
+	if (!mboxd)
+		return -ENOMEM;
+
 	return 0;
 }
 module_init(omap_mbox_init);
 
 static void __exit omap_mbox_exit(void)
 {
+	destroy_workqueue(mboxd);
 }
 module_exit(omap_mbox_exit);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f757672..7e669c9 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -23,68 +23,102 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
 
+#include "../mach-omap2/cm-regbits-34xx.h"
+
 struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count;
+int omap_mcbsp_count, omap_mcbsp_cache_size;
 
-void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val)
+void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 {
-	if (cpu_class_is_omap1() || cpu_is_omap2420())
-		__raw_writew((u16)val, io_base + reg);
-	else
-		__raw_writel(val, io_base + reg);
+	if (cpu_class_is_omap1()) {
+		((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
+		__raw_writew((u16)val, mcbsp->io_base + reg);
+	} else if (cpu_is_omap2420()) {
+		((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
+		__raw_writew((u16)val, mcbsp->io_base + reg);
+	} else {
+		((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
+		__raw_writel(val, mcbsp->io_base + reg);
+	}
 }
 
-int omap_mcbsp_read(void __iomem *io_base, u16 reg)
+int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
 {
-	if (cpu_class_is_omap1() || cpu_is_omap2420())
-		return __raw_readw(io_base + reg);
-	else
-		return __raw_readl(io_base + reg);
+	if (cpu_class_is_omap1()) {
+		return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+				((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
+	} else if (cpu_is_omap2420()) {
+		return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+				((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+	} else {
+		return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
+				((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+	}
 }
 
-#define OMAP_MCBSP_READ(base, reg) \
-			omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg)
-#define OMAP_MCBSP_WRITE(base, reg, val) \
-			omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val)
+#ifdef CONFIG_ARCH_OMAP3
+void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
+{
+	__raw_writel(val, mcbsp->st_data->io_base_st + reg);
+}
+
+int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
+{
+	return __raw_readl(mcbsp->st_data->io_base_st + reg);
+}
+#endif
+
+#define MCBSP_READ(mcbsp, reg) \
+		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
+#define MCBSP_WRITE(mcbsp, reg, val) \
+		omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val)
+#define MCBSP_READ_CACHE(mcbsp, reg) \
+		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
 
 #define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
 #define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
 
+#define MCBSP_ST_READ(mcbsp, reg) \
+			omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
+#define MCBSP_ST_WRITE(mcbsp, reg, val) \
+			omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val)
+
 static void omap_mcbsp_dump_reg(u8 id)
 {
 	struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
 
 	dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
 	dev_dbg(mcbsp->dev, "DRR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, DRR2));
+			MCBSP_READ(mcbsp, DRR2));
 	dev_dbg(mcbsp->dev, "DRR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, DRR1));
+			MCBSP_READ(mcbsp, DRR1));
 	dev_dbg(mcbsp->dev, "DXR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, DXR2));
+			MCBSP_READ(mcbsp, DXR2));
 	dev_dbg(mcbsp->dev, "DXR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, DXR1));
+			MCBSP_READ(mcbsp, DXR1));
 	dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, SPCR2));
+			MCBSP_READ(mcbsp, SPCR2));
 	dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, SPCR1));
+			MCBSP_READ(mcbsp, SPCR1));
 	dev_dbg(mcbsp->dev, "RCR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, RCR2));
+			MCBSP_READ(mcbsp, RCR2));
 	dev_dbg(mcbsp->dev, "RCR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, RCR1));
+			MCBSP_READ(mcbsp, RCR1));
 	dev_dbg(mcbsp->dev, "XCR2:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, XCR2));
+			MCBSP_READ(mcbsp, XCR2));
 	dev_dbg(mcbsp->dev, "XCR1:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, XCR1));
+			MCBSP_READ(mcbsp, XCR1));
 	dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, SRGR2));
+			MCBSP_READ(mcbsp, SRGR2));
 	dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, SRGR1));
+			MCBSP_READ(mcbsp, SRGR1));
 	dev_dbg(mcbsp->dev, "PCR0:  0x%04x\n",
-			OMAP_MCBSP_READ(mcbsp->io_base, PCR0));
+			MCBSP_READ(mcbsp, PCR0));
 	dev_dbg(mcbsp->dev, "***********************\n");
 }
 
@@ -93,15 +127,14 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 	struct omap_mcbsp *mcbsp_tx = dev_id;
 	u16 irqst_spcr2;
 
-	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2);
 	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
 	if (irqst_spcr2 & XSYNC_ERR) {
 		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
 			irqst_spcr2);
 		/* Writing zero to XSYNC_ERR clears the IRQ */
-		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
-			irqst_spcr2 & ~(XSYNC_ERR));
+		MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2));
 	} else {
 		complete(&mcbsp_tx->tx_irq_completion);
 	}
@@ -114,15 +147,14 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 	struct omap_mcbsp *mcbsp_rx = dev_id;
 	u16 irqst_spcr1;
 
-	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1);
 	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
 	if (irqst_spcr1 & RSYNC_ERR) {
 		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
 			irqst_spcr1);
 		/* Writing zero to RSYNC_ERR clears the IRQ */
-		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
-			irqst_spcr1 & ~(RSYNC_ERR));
+		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
 		complete(&mcbsp_rx->tx_irq_completion);
 	}
@@ -135,7 +167,7 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
 	struct omap_mcbsp *mcbsp_dma_tx = data;
 
 	dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+		MCBSP_READ(mcbsp_dma_tx, SPCR2));
 
 	/* We can free the channels */
 	omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -149,7 +181,7 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
 	struct omap_mcbsp *mcbsp_dma_rx = data;
 
 	dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+		MCBSP_READ(mcbsp_dma_rx, SPCR2));
 
 	/* We can free the channels */
 	omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
@@ -167,7 +199,6 @@ static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -175,30 +206,280 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	io_base = mcbsp->io_base;
 	dev_dbg(mcbsp->dev, "Configuring McBSP%d  phys_base: 0x%08lx\n",
 			mcbsp->id, mcbsp->phys_base);
 
 	/* We write the given config */
-	OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1);
-	OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2);
-	OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1);
-	OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2);
-	OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
-	OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
-	OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
-	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
-	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
-	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+	MCBSP_WRITE(mcbsp, SPCR2, config->spcr2);
+	MCBSP_WRITE(mcbsp, SPCR1, config->spcr1);
+	MCBSP_WRITE(mcbsp, RCR2, config->rcr2);
+	MCBSP_WRITE(mcbsp, RCR1, config->rcr1);
+	MCBSP_WRITE(mcbsp, XCR2, config->xcr2);
+	MCBSP_WRITE(mcbsp, XCR1, config->xcr1);
+	MCBSP_WRITE(mcbsp, SRGR2, config->srgr2);
+	MCBSP_WRITE(mcbsp, SRGR1, config->srgr1);
+	MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
+	MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
+	MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
 	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
-		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+		MCBSP_WRITE(mcbsp, XCCR, config->xccr);
+		MCBSP_WRITE(mcbsp, RCCR, config->rccr);
 	}
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
+static void omap_st_on(struct omap_mcbsp *mcbsp)
+{
+	unsigned int w;
+
+	/*
+	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
+	 * are enabled or sidetones start sounding ugly.
+	 */
+	w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	w &= ~(1 << (mcbsp->id - 2));
+	cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+	/* Enable McBSP Sidetone */
+	w = MCBSP_READ(mcbsp, SSELCR);
+	MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN);
+
+	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+	/* Enable Sidetone from Sidetone Core */
+	w = MCBSP_ST_READ(mcbsp, SSELCR);
+	MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN);
+}
+
+static void omap_st_off(struct omap_mcbsp *mcbsp)
+{
+	unsigned int w;
+
+	w = MCBSP_ST_READ(mcbsp, SSELCR);
+	MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
+
+	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
+
+	w = MCBSP_READ(mcbsp, SSELCR);
+	MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
+
+	w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	w |= 1 << (mcbsp->id - 2);
+	cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+}
+
+static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
+{
+	u16 val, i;
+
+	val = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, val & ~(ST_AUTOIDLE));
+
+	val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+	if (val & ST_COEFFWREN)
+		MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+	MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN);
+
+	for (i = 0; i < 128; i++)
+		MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]);
+
+	i = 0;
+
+	val = MCBSP_ST_READ(mcbsp, SSELCR);
+	while (!(val & ST_COEFFWRDONE) && (++i < 1000))
+		val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+	MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+	if (i == 1000)
+		dev_err(mcbsp->dev, "McBSP FIR load error!\n");
+}
+
+static void omap_st_chgain(struct omap_mcbsp *mcbsp)
+{
+	u16 w;
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+	w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+	MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+	w = MCBSP_ST_READ(mcbsp, SSELCR);
+
+	MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \
+		      ST_CH1GAIN(st_data->ch1gain));
+}
+
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain)
+{
+	struct omap_mcbsp *mcbsp;
+	struct omap_mcbsp_st_data *st_data;
+	int ret = 0;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	st_data = mcbsp->st_data;
+
+	if (!st_data)
+		return -ENOENT;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (channel == 0)
+		st_data->ch0gain = chgain;
+	else if (channel == 1)
+		st_data->ch1gain = chgain;
+	else
+		ret = -EINVAL;
+
+	if (st_data->enabled)
+		omap_st_chgain(mcbsp);
+	spin_unlock_irq(&mcbsp->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_st_set_chgain);
+
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain)
+{
+	struct omap_mcbsp *mcbsp;
+	struct omap_mcbsp_st_data *st_data;
+	int ret = 0;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	st_data = mcbsp->st_data;
+
+	if (!st_data)
+		return -ENOENT;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (channel == 0)
+		*chgain = st_data->ch0gain;
+	else if (channel == 1)
+		*chgain = st_data->ch1gain;
+	else
+		ret = -EINVAL;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_st_get_chgain);
+
+static int omap_st_start(struct omap_mcbsp *mcbsp)
+{
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+	if (st_data && st_data->enabled && !st_data->running) {
+		omap_st_fir_write(mcbsp, st_data->taps);
+		omap_st_chgain(mcbsp);
+
+		if (!mcbsp->free) {
+			omap_st_on(mcbsp);
+			st_data->running = 1;
+		}
+	}
+
+	return 0;
+}
+
+int omap_st_enable(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	struct omap_mcbsp_st_data *st_data;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	st_data = mcbsp->st_data;
+
+	if (!st_data)
+		return -ENODEV;
+
+	spin_lock_irq(&mcbsp->lock);
+	st_data->enabled = 1;
+	omap_st_start(mcbsp);
+	spin_unlock_irq(&mcbsp->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_st_enable);
+
+static int omap_st_stop(struct omap_mcbsp *mcbsp)
+{
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+	if (st_data && st_data->running) {
+		if (!mcbsp->free) {
+			omap_st_off(mcbsp);
+			st_data->running = 0;
+		}
+	}
+
+	return 0;
+}
+
+int omap_st_disable(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	struct omap_mcbsp_st_data *st_data;
+	int ret = 0;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	st_data = mcbsp->st_data;
+
+	if (!st_data)
+		return -ENODEV;
+
+	spin_lock_irq(&mcbsp->lock);
+	omap_st_stop(mcbsp);
+	st_data->enabled = 0;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(omap_st_disable);
+
+int omap_st_is_enabled(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	struct omap_mcbsp_st_data *st_data;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	st_data = mcbsp->st_data;
+
+	if (!st_data)
+		return -ENODEV;
+
+
+	return st_data->enabled;
+}
+EXPORT_SYMBOL(omap_st_is_enabled);
+
 /*
  * omap_mcbsp_set_tx_threshold configures how to deal
  * with transmit threshold. the threshold value and handler can be
@@ -207,9 +488,8 @@ EXPORT_SYMBOL(omap_mcbsp_config);
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
 		return;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -217,9 +497,8 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 		return;
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 
-	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+	MCBSP_WRITE(mcbsp, THRSH2, threshold);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
 
@@ -231,9 +510,8 @@ EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
 		return;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -241,9 +519,8 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 		return;
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 
-	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+	MCBSP_WRITE(mcbsp, THRSH1, threshold);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
 
@@ -283,6 +560,61 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 
+#define MCBSP2_FIFO_SIZE	0x500 /* 1024 + 256 locations */
+#define MCBSP1345_FIFO_SIZE	0x80  /* 128 locations */
+/*
+ * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
+ */
+u16 omap_mcbsp_get_tx_delay(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	u16 buffstat;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	/* Returns the number of free locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
+
+	/* Number of slots are different in McBSP ports */
+	if (mcbsp->id == 2)
+		return MCBSP2_FIFO_SIZE - buffstat;
+	else
+		return MCBSP1345_FIFO_SIZE - buffstat;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_tx_delay);
+
+/*
+ * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO
+ * to reach the threshold value (when the DMA will be triggered to read it)
+ */
+u16 omap_mcbsp_get_rx_delay(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	u16 buffstat, threshold;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	/* Returns the number of used locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
+	/* RX threshold */
+	threshold = MCBSP_READ(mcbsp, THRSH1);
+
+	/* Return the number of location till we reach the threshold limit */
+	if (threshold <= buffstat)
+		return 0;
+	else
+		return threshold - buffstat;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_rx_delay);
+
 /*
  * omap_mcbsp_get_dma_op_mode just return the current configured
  * operating mode for the mcbsp channel
@@ -310,22 +642,21 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 	 * Enable wakup behavior, smart idle and all wakeups
 	 * REVISIT: some wakeups may be unnecessary
 	 */
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		u16 syscon;
 
-		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon = MCBSP_READ(mcbsp, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
 					CLOCKACTIVITY(0x02));
-			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
-					XRDYEN | RRDYEN);
+			MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
 		} else {
 			syscon |= SIDLEMODE(0x01);
 		}
 
-		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+		MCBSP_WRITE(mcbsp, SYSCON, syscon);
 	}
 }
 
@@ -334,10 +665,10 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 	/*
 	 * Disable wakup behavior, smart idle and all wakeups
 	 */
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		u16 syscon;
 
-		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon = MCBSP_READ(mcbsp, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 		/*
 		 * HW bug workaround - If no_idle mode is taken, we need to
@@ -345,17 +676,19 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 		 * device will not hit retention anymore.
 		 */
 		syscon |= SIDLEMODE(0x02);
-		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+		MCBSP_WRITE(mcbsp, SYSCON, syscon);
 
 		syscon &= ~(SIDLEMODE(0x03));
-		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+		MCBSP_WRITE(mcbsp, SYSCON, syscon);
 
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+		MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
 	}
 }
 #else
 static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
 static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
 #endif
 
 /*
@@ -392,6 +725,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	void *reg_cache;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -400,15 +734,21 @@ int omap_mcbsp_request(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
+	reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+	if (!reg_cache) {
+		return -ENOMEM;
+	}
+
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
 		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
 			mcbsp->id);
-		spin_unlock(&mcbsp->lock);
-		return -EBUSY;
+		err = -EBUSY;
+		goto err_kfree;
 	}
 
 	mcbsp->free = 0;
+	mcbsp->reg_cache = reg_cache;
 	spin_unlock(&mcbsp->lock);
 
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
@@ -424,8 +764,8 @@ int omap_mcbsp_request(unsigned int id)
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
 	 */
-	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0);
-	OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0);
+	MCBSP_WRITE(mcbsp, SPCR1, 0);
+	MCBSP_WRITE(mcbsp, SPCR2, 0);
 
 	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* We need to get IRQs here */
@@ -436,26 +776,29 @@ int omap_mcbsp_request(unsigned int id)
 			dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
 					"for McBSP%d\n", mcbsp->tx_irq,
 					mcbsp->id);
-			goto error;
+			goto err_clk_disable;
 		}
 
-		init_completion(&mcbsp->rx_irq_completion);
-		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
+		if (mcbsp->rx_irq) {
+			init_completion(&mcbsp->rx_irq_completion);
+			err = request_irq(mcbsp->rx_irq,
+					omap_mcbsp_rx_irq_handler,
 					0, "McBSP", (void *)mcbsp);
-		if (err != 0) {
-			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
-					"for McBSP%d\n", mcbsp->rx_irq,
-					mcbsp->id);
-			goto tx_irq;
+			if (err != 0) {
+				dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
+						"for McBSP%d\n", mcbsp->rx_irq,
+						mcbsp->id);
+				goto err_free_irq;
+			}
 		}
 	}
 
 	return 0;
-tx_irq:
+err_free_irq:
 	free_irq(mcbsp->tx_irq, (void *)mcbsp);
-error:
+err_clk_disable:
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
-			mcbsp->pdata->ops->free(id);
+		mcbsp->pdata->ops->free(id);
 
 	/* Do procedure specific to omap34xx arch, if applicable */
 	omap34xx_mcbsp_free(mcbsp);
@@ -463,7 +806,12 @@ error:
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
+	spin_lock(&mcbsp->lock);
 	mcbsp->free = 1;
+	mcbsp->reg_cache = NULL;
+err_kfree:
+	spin_unlock(&mcbsp->lock);
+	kfree(reg_cache);
 
 	return err;
 }
@@ -472,6 +820,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	void *reg_cache;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -490,20 +839,23 @@ void omap_mcbsp_free(unsigned int id)
 
 	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* Free IRQs */
-		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		if (mcbsp->rx_irq)
+			free_irq(mcbsp->rx_irq, (void *)mcbsp);
 		free_irq(mcbsp->tx_irq, (void *)mcbsp);
 	}
 
-	spin_lock(&mcbsp->lock);
-	if (mcbsp->free) {
-		dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
-			mcbsp->id);
-		spin_unlock(&mcbsp->lock);
-		return;
-	}
+	reg_cache = mcbsp->reg_cache;
 
-	mcbsp->free = 1;
+	spin_lock(&mcbsp->lock);
+	if (mcbsp->free)
+		dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
+	else
+		mcbsp->free = 1;
+	mcbsp->reg_cache = NULL;
 	spin_unlock(&mcbsp->lock);
+
+	if (reg_cache)
+		kfree(reg_cache);
 }
 EXPORT_SYMBOL(omap_mcbsp_free);
 
@@ -515,7 +867,6 @@ EXPORT_SYMBOL(omap_mcbsp_free);
 void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 	int idle;
 	u16 w;
 
@@ -524,28 +875,30 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 		return;
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 
-	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
-	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
+	if (cpu_is_omap34xx())
+		omap_st_start(mcbsp);
 
-	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
-		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+	mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
+	mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
+
+	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
 
 	if (idle) {
 		/* Start the sample generator */
-		w = OMAP_MCBSP_READ(io_base, SPCR2);
-		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
 	}
 
 	/* Enable transmitter and receiver */
 	tx &= 1;
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+	MCBSP_WRITE(mcbsp, SPCR2, w | tx);
 
 	rx &= 1;
-	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+	MCBSP_WRITE(mcbsp, SPCR1, w | rx);
 
 	/*
 	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
@@ -557,18 +910,18 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 
 	if (idle) {
 		/* Start frame sync */
-		w = OMAP_MCBSP_READ(io_base, SPCR2);
-		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		/* Release the transmitter and receiver */
-		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w &= ~(tx ? XDISABLE : 0);
-		OMAP_MCBSP_WRITE(io_base, XCCR, w);
-		w = OMAP_MCBSP_READ(io_base, RCCR);
+		MCBSP_WRITE(mcbsp, XCCR, w);
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
 		w &= ~(rx ? RDISABLE : 0);
-		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+		MCBSP_WRITE(mcbsp, RCCR, w);
 	}
 
 	/* Dump McBSP Regs */
@@ -579,7 +932,6 @@ EXPORT_SYMBOL(omap_mcbsp_start);
 void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 	int idle;
 	u16 w;
 
@@ -589,36 +941,38 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	}
 
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
 	tx &= 1;
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-		w = OMAP_MCBSP_READ(io_base, XCCR);
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w |= (tx ? XDISABLE : 0);
-		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		MCBSP_WRITE(mcbsp, XCCR, w);
 	}
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+	MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
 
 	/* Reset receiver */
 	rx &= 1;
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
-		w = OMAP_MCBSP_READ(io_base, RCCR);
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		w = MCBSP_READ_CACHE(mcbsp, RCCR);
 		w |= (rx ? RDISABLE : 0);
-		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+		MCBSP_WRITE(mcbsp, RCCR, w);
 	}
-	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
+	w = MCBSP_READ_CACHE(mcbsp, SPCR1);
+	MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
 
-	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
-		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
 
 	if (idle) {
 		/* Reset the sample rate generator */
-		w = OMAP_MCBSP_READ(io_base, SPCR2);
-		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
 	}
+
+	if (cpu_is_omap34xx())
+		omap_st_stop(mcbsp);
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
@@ -626,7 +980,6 @@ EXPORT_SYMBOL(omap_mcbsp_stop);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -634,28 +987,26 @@ int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 	}
 
 	mcbsp = id_to_mcbsp_ptr(id);
-	base = mcbsp->io_base;
 
-	writew(buf, base + OMAP_MCBSP_REG_DXR1);
+	MCBSP_WRITE(mcbsp, DXR1, buf);
 	/* if frame sync error - clear the error */
-	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+	if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
 		/* clear error */
-		writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
-		       base + OMAP_MCBSP_REG_SPCR2);
+		MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
 		/* resend */
 		return -1;
 	} else {
 		/* wait for transmit confirmation */
 		int attemps = 0;
-		while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+		while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) {
 			if (attemps++ > 1000) {
-				writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
-				       (~XRST),
-				       base + OMAP_MCBSP_REG_SPCR2);
+				MCBSP_WRITE(mcbsp, SPCR2,
+						MCBSP_READ_CACHE(mcbsp, SPCR2) &
+						(~XRST));
 				udelay(10);
-				writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
-				       (XRST),
-				       base + OMAP_MCBSP_REG_SPCR2);
+				MCBSP_WRITE(mcbsp, SPCR2,
+						MCBSP_READ_CACHE(mcbsp, SPCR2) |
+						(XRST));
 				udelay(10);
 				dev_err(mcbsp->dev, "Could not write to"
 					" McBSP%d Register\n", mcbsp->id);
@@ -671,7 +1022,6 @@ EXPORT_SYMBOL(omap_mcbsp_pollwrite);
 int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *base;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -679,26 +1029,24 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	base = mcbsp->io_base;
 	/* if frame sync error - clear the error */
-	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+	if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
 		/* clear error */
-		writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
-		       base + OMAP_MCBSP_REG_SPCR1);
+		MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
 		/* resend */
 		return -1;
 	} else {
 		/* wait for recieve confirmation */
 		int attemps = 0;
-		while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+		while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
 			if (attemps++ > 1000) {
-				writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
-				       (~RRST),
-				       base + OMAP_MCBSP_REG_SPCR1);
+				MCBSP_WRITE(mcbsp, SPCR1,
+						MCBSP_READ_CACHE(mcbsp, SPCR1) &
+						(~RRST));
 				udelay(10);
-				writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
-				       (RRST),
-				       base + OMAP_MCBSP_REG_SPCR1);
+				MCBSP_WRITE(mcbsp, SPCR1,
+						MCBSP_READ_CACHE(mcbsp, SPCR1) |
+						(RRST));
 				udelay(10);
 				dev_err(mcbsp->dev, "Could not read from"
 					" McBSP%d Register\n", mcbsp->id);
@@ -706,7 +1054,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
 			}
 		}
 	}
-	*buf = readw(base + OMAP_MCBSP_REG_DRR1);
+	*buf = MCBSP_READ(mcbsp, DRR1);
 
 	return 0;
 }
@@ -718,7 +1066,6 @@ EXPORT_SYMBOL(omap_mcbsp_pollread);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 	omap_mcbsp_word_length word_length;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -727,21 +1074,19 @@ void omap_mcbsp_xmit_word(unsigned int id, u32 word)
 	}
 
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 	word_length = mcbsp->tx_word_length;
 
 	wait_for_completion(&mcbsp->tx_irq_completion);
 
 	if (word_length > OMAP_MCBSP_WORD_16)
-		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
-	OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+		MCBSP_WRITE(mcbsp, DXR2, word >> 16);
+	MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
 }
 EXPORT_SYMBOL(omap_mcbsp_xmit_word);
 
 u32 omap_mcbsp_recv_word(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 	u16 word_lsb, word_msb = 0;
 	omap_mcbsp_word_length word_length;
 
@@ -752,13 +1097,12 @@ u32 omap_mcbsp_recv_word(unsigned int id)
 	mcbsp = id_to_mcbsp_ptr(id);
 
 	word_length = mcbsp->rx_word_length;
-	io_base = mcbsp->io_base;
 
 	wait_for_completion(&mcbsp->rx_irq_completion);
 
 	if (word_length > OMAP_MCBSP_WORD_16)
-		word_msb = OMAP_MCBSP_READ(io_base, DRR2);
-	word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+		word_msb = MCBSP_READ(mcbsp, DRR2);
+	word_lsb = MCBSP_READ(mcbsp, DRR1);
 
 	return (word_lsb | (word_msb << 16));
 }
@@ -767,7 +1111,6 @@ EXPORT_SYMBOL(omap_mcbsp_recv_word);
 int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 {
 	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
 	omap_mcbsp_word_length tx_word_length;
 	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -777,7 +1120,6 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 		return -ENODEV;
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 	tx_word_length = mcbsp->tx_word_length;
 	rx_word_length = mcbsp->rx_word_length;
 
@@ -785,14 +1127,16 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 		return -EINVAL;
 
 	/* First we wait for the transmitter to be ready */
-	spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+	spcr2 = MCBSP_READ(mcbsp, SPCR2);
 	while (!(spcr2 & XRDY)) {
-		spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+		spcr2 = MCBSP_READ(mcbsp, SPCR2);
 		if (attempts++ > 1000) {
 			/* We must reset the transmitter */
-			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
 			udelay(10);
-			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d transmitter not "
 				"ready\n", mcbsp->id);
@@ -802,18 +1146,20 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 
 	/* Now we can push the data */
 	if (tx_word_length > OMAP_MCBSP_WORD_16)
-		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
-	OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+		MCBSP_WRITE(mcbsp, DXR2, word >> 16);
+	MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
 
 	/* We wait for the receiver to be ready */
-	spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+	spcr1 = MCBSP_READ(mcbsp, SPCR1);
 	while (!(spcr1 & RRDY)) {
-		spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+		spcr1 = MCBSP_READ(mcbsp, SPCR1);
 		if (attempts++ > 1000) {
 			/* We must reset the receiver */
-			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
 			udelay(10);
-			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d receiver not "
 				"ready\n", mcbsp->id);
@@ -823,8 +1169,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
 
 	/* Receiver is ready, let's read the dummy data */
 	if (rx_word_length > OMAP_MCBSP_WORD_16)
-		word_msb = OMAP_MCBSP_READ(io_base, DRR2);
-	word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+		word_msb = MCBSP_READ(mcbsp, DRR2);
+	word_lsb = MCBSP_READ(mcbsp, DRR1);
 
 	return 0;
 }
@@ -834,7 +1180,6 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 {
 	struct omap_mcbsp *mcbsp;
 	u32 clock_word = 0;
-	void __iomem *io_base;
 	omap_mcbsp_word_length tx_word_length;
 	omap_mcbsp_word_length rx_word_length;
 	u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
@@ -845,7 +1190,6 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 	}
 
 	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
 
 	tx_word_length = mcbsp->tx_word_length;
 	rx_word_length = mcbsp->rx_word_length;
@@ -854,14 +1198,16 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 		return -EINVAL;
 
 	/* First we wait for the transmitter to be ready */
-	spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+	spcr2 = MCBSP_READ(mcbsp, SPCR2);
 	while (!(spcr2 & XRDY)) {
-		spcr2 = OMAP_MCBSP_READ(io_base, SPCR2);
+		spcr2 = MCBSP_READ(mcbsp, SPCR2);
 		if (attempts++ > 1000) {
 			/* We must reset the transmitter */
-			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST));
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
 			udelay(10);
-			OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST);
+			MCBSP_WRITE(mcbsp, SPCR2,
+				    MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d transmitter not "
 				"ready\n", mcbsp->id);
@@ -871,18 +1217,20 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 
 	/* We first need to enable the bus clock */
 	if (tx_word_length > OMAP_MCBSP_WORD_16)
-		OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16);
-	OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff);
+		MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16);
+	MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff);
 
 	/* We wait for the receiver to be ready */
-	spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+	spcr1 = MCBSP_READ(mcbsp, SPCR1);
 	while (!(spcr1 & RRDY)) {
-		spcr1 = OMAP_MCBSP_READ(io_base, SPCR1);
+		spcr1 = MCBSP_READ(mcbsp, SPCR1);
 		if (attempts++ > 1000) {
 			/* We must reset the receiver */
-			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST));
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
 			udelay(10);
-			OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST);
+			MCBSP_WRITE(mcbsp, SPCR1,
+				    MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
 			udelay(10);
 			dev_err(mcbsp->dev, "McBSP%d receiver not "
 				"ready\n", mcbsp->id);
@@ -892,8 +1240,8 @@ int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
 
 	/* Receiver is ready, there is something for us */
 	if (rx_word_length > OMAP_MCBSP_WORD_16)
-		word_msb = OMAP_MCBSP_READ(io_base, DRR2);
-	word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+		word_msb = MCBSP_READ(mcbsp, DRR2);
+	word_lsb = MCBSP_READ(mcbsp, DRR1);
 
 	word[0] = (word_lsb | (word_msb << 16));
 
@@ -1107,7 +1455,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
 #define max_thres(m)			(mcbsp->pdata->buffer_size)
 #define valid_threshold(m, val)		((val) <= max_thres(m))
 #define THRESHOLD_PROP_BUILDER(prop)					\
@@ -1198,6 +1546,64 @@ unlock:
 
 static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
 
+static ssize_t st_taps_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+	ssize_t status = 0;
+	int i;
+
+	spin_lock_irq(&mcbsp->lock);
+	for (i = 0; i < st_data->nr_taps; i++)
+		status += sprintf(&buf[status], (i ? ", %d" : "%d"),
+				  st_data->taps[i]);
+	if (i)
+		status += sprintf(&buf[status], "\n");
+	spin_unlock_irq(&mcbsp->lock);
+
+	return status;
+}
+
+static ssize_t st_taps_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+	int val, tmp, status, i = 0;
+
+	spin_lock_irq(&mcbsp->lock);
+	memset(st_data->taps, 0, sizeof(st_data->taps));
+	st_data->nr_taps = 0;
+
+	do {
+		status = sscanf(buf, "%d%n", &val, &tmp);
+		if (status < 0 || status == 0) {
+			size = -EINVAL;
+			goto out;
+		}
+		if (val < -32768 || val > 32767) {
+			size = -EINVAL;
+			goto out;
+		}
+		st_data->taps[i++] = val;
+		buf += tmp;
+		if (*buf != ',')
+			break;
+		buf++;
+	} while (1);
+
+	st_data->nr_taps = i;
+
+out:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
+
 static const struct attribute *additional_attrs[] = {
 	&dev_attr_max_tx_thres.attr,
 	&dev_attr_max_rx_thres.attr,
@@ -1219,6 +1625,60 @@ static inline void __devexit omap_additional_remove(struct device *dev)
 	sysfs_remove_group(&dev->kobj, &additional_attr_group);
 }
 
+static const struct attribute *sidetone_attrs[] = {
+	&dev_attr_st_taps.attr,
+	NULL,
+};
+
+static const struct attribute_group sidetone_attr_group = {
+	.attrs = (struct attribute **)sidetone_attrs,
+};
+
+int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+{
+	struct omap_mcbsp_platform_data *pdata = mcbsp->pdata;
+	struct omap_mcbsp_st_data *st_data;
+	int err;
+
+	st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL);
+	if (!st_data) {
+		err = -ENOMEM;
+		goto err1;
+	}
+
+	st_data->io_base_st = ioremap(pdata->phys_base_st, SZ_4K);
+	if (!st_data->io_base_st) {
+		err = -ENOMEM;
+		goto err2;
+	}
+
+	err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+	if (err)
+		goto err3;
+
+	mcbsp->st_data = st_data;
+	return 0;
+
+err3:
+	iounmap(st_data->io_base_st);
+err2:
+	kfree(st_data);
+err1:
+	return err;
+
+}
+
+static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp)
+{
+	struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+	if (st_data) {
+		sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+		iounmap(st_data->io_base_st);
+		kfree(st_data);
+	}
+}
+
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
 	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
@@ -1232,6 +1692,12 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 		if (omap_additional_add(mcbsp->dev))
 			dev_warn(mcbsp->dev,
 				"Unable to create additional controls\n");
+
+		if (mcbsp->id == 2 || mcbsp->id == 3)
+			if (omap_st_add(mcbsp))
+				dev_warn(mcbsp->dev,
+				 "Unable to create sidetone controls\n");
+
 	} else {
 		mcbsp->max_tx_thres = -EINVAL;
 		mcbsp->max_rx_thres = -EINVAL;
@@ -1240,13 +1706,17 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 
 static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
 {
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx()) {
 		omap_additional_remove(mcbsp->dev);
+
+		if (mcbsp->id == 2 || mcbsp->id == 3)
+			omap_st_remove(mcbsp);
+	}
 }
 #else
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
 static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP34XX */
+#endif /* CONFIG_ARCH_OMAP3 */
 
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 1e5648d..f899603 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -2,10 +2,10 @@
  * omap_device implementation
  *
  * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
+ * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
  * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
  * Woodruff
  *
@@ -79,6 +79,7 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
@@ -89,16 +90,8 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE		0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE		0x48320000
-#else
-# error Unknown OMAP device
-#endif
+
+#define OMAP_DEVICE_MAGIC 0xf00dcafe
 
 /* Private functions */
 
@@ -148,10 +141,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
 			 act_lat);
 
-		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
-		     "activate step %d took longer than expected (%llu > %d)\n",
-		     od->pdev.name, od->pdev.id, od->pm_lat_level,
-		     act_lat, odpl->activate_lat);
+		if (act_lat > odpl->activate_lat) {
+			odpl->activate_lat_worst = act_lat;
+			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+				odpl->activate_lat = act_lat;
+				pr_warning("omap_device: %s.%d: new worst case "
+					   "activate latency %d: %llu\n",
+					   od->pdev.name, od->pdev.id,
+					   od->pm_lat_level, act_lat);
+			} else
+				pr_warning("omap_device: %s.%d: activate "
+					   "latency %d higher than exptected. "
+					   "(%llu > %d)\n",
+					   od->pdev.name, od->pdev.id,
+					   od->pm_lat_level, act_lat,
+					   odpl->activate_lat);
+		}
 
 		od->dev_wakeup_lat -= odpl->activate_lat;
 	}
@@ -204,10 +209,23 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
 			 deact_lat);
 
-		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
-		     "deactivate step %d took longer than expected "
-		     "(%llu > %d)\n", od->pdev.name, od->pdev.id,
-		     od->pm_lat_level, deact_lat, odpl->deactivate_lat);
+		if (deact_lat > odpl->deactivate_lat) {
+			odpl->deactivate_lat_worst = deact_lat;
+			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
+				odpl->deactivate_lat = deact_lat;
+				pr_warning("omap_device: %s.%d: new worst case "
+					   "deactivate latency %d: %llu\n",
+					   od->pdev.name, od->pdev.id,
+					   od->pm_lat_level, deact_lat);
+			} else
+				pr_warning("omap_device: %s.%d: deactivate "
+					   "latency %d higher than exptected. "
+					   "(%llu > %d)\n",
+					   od->pdev.name, od->pdev.id,
+					   od->pm_lat_level, deact_lat,
+					   odpl->deactivate_lat);
+		}
+
 
 		od->dev_wakeup_lat += odpl->activate_lat;
 
@@ -290,6 +308,7 @@ int omap_device_fill_resources(struct omap_device *od, struct resource *res)
  * @pdata_len: amount of memory pointed to by @pdata
  * @pm_lats: pointer to a omap_device_pm_latency array for this device
  * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
  *
  * Convenience function for building and registering a single
  * omap_device record, which in turn builds and registers a
@@ -301,7 +320,7 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
 				      struct omap_hwmod *oh, void *pdata,
 				      int pdata_len,
 				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt)
+				      int pm_lats_cnt, int is_early_device)
 {
 	struct omap_hwmod *ohs[] = { oh };
 
@@ -309,7 +328,8 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
 		return ERR_PTR(-EINVAL);
 
 	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
-				    pdata_len, pm_lats, pm_lats_cnt);
+				    pdata_len, pm_lats, pm_lats_cnt,
+				    is_early_device);
 }
 
 /**
@@ -321,6 +341,7 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
  * @pdata_len: amount of memory pointed to by @pdata
  * @pm_lats: pointer to a omap_device_pm_latency array for this device
  * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
  *
  * Convenience function for building and registering an omap_device
  * subsystem record.  Subsystem records consist of multiple
@@ -332,7 +353,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 struct omap_hwmod **ohs, int oh_cnt,
 					 void *pdata, int pdata_len,
 					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt)
+					 int pm_lats_cnt, int is_early_device)
 {
 	int ret = -ENOMEM;
 	struct omap_device *od;
@@ -388,7 +409,13 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	od->pm_lats = pm_lats;
 	od->pm_lats_cnt = pm_lats_cnt;
 
-	ret = omap_device_register(od);
+	od->magic = OMAP_DEVICE_MAGIC;
+
+	if (is_early_device)
+		ret = omap_early_device_register(od);
+	else
+		ret = omap_device_register(od);
+
 	if (ret)
 		goto odbs_exit4;
 
@@ -409,6 +436,24 @@ odbs_exit1:
 }
 
 /**
+ * omap_early_device_register - register an omap_device as an early platform
+ * device.
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_early_add_device() on the underlying platform_device.
+ * Returns 0 by default.
+ */
+int omap_early_device_register(struct omap_device *od)
+{
+	struct platform_device *devices[1];
+
+	devices[0] = &(od->pdev);
+	early_platform_add_devices(devices, 1);
+	return 0;
+}
+
+/**
  * omap_device_register - register an omap_device with one omap_hwmod
  * @od: struct omap_device * to register
  *
@@ -447,8 +492,8 @@ int omap_device_enable(struct platform_device *pdev)
 	od = _find_by_pdev(pdev);
 
 	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-		WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
-		     "invalid state\n", od->pdev.name, od->pdev.id);
+		WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+		     od->pdev.name, od->pdev.id, __func__, od->_state);
 		return -EINVAL;
 	}
 
@@ -486,8 +531,8 @@ int omap_device_idle(struct platform_device *pdev)
 	od = _find_by_pdev(pdev);
 
 	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
-		WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
-		     "invalid state\n", od->pdev.name, od->pdev.id);
+		WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+		     od->pdev.name, od->pdev.id, __func__, od->_state);
 		return -EINVAL;
 	}
 
@@ -519,8 +564,8 @@ int omap_device_shutdown(struct platform_device *pdev)
 
 	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
 	    od->_state != OMAP_DEVICE_STATE_IDLE) {
-		WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
-		     "from invalid state\n", od->pdev.name, od->pdev.id);
+		WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
+		     od->pdev.name, od->pdev.id, __func__, od->_state);
 		return -EINVAL;
 	}
 
@@ -574,6 +619,18 @@ int omap_device_align_pm_lat(struct platform_device *pdev,
 }
 
 /**
+ * omap_device_is_valid - Check if pointer is a valid omap_device
+ * @od: struct omap_device *
+ *
+ * Return whether struct omap_device pointer @od points to a valid
+ * omap_device.
+ */
+bool omap_device_is_valid(struct omap_device *od)
+{
+	return (od && od->magic == OMAP_DEVICE_MAGIC);
+}
+
+/**
  * omap_device_get_pwrdm - return the powerdomain * associated with @od
  * @od: struct omap_device *
  *
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index d8d5094..226b2e8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -53,7 +53,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
@@ -437,6 +437,20 @@ static inline int omap34xx_sram_init(void)
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+int __init omap44xx_sram_init(void)
+{
+	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
+
+	return -ENODEV;
+}
+#else
+static inline int omap44xx_sram_init(void)
+{
+	return 0;
+}
+#endif
+
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -451,7 +465,7 @@ int __init omap_sram_init(void)
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
 	else if (cpu_is_omap44xx())
-		omap34xx_sram_init(); /* FIXME: */
+		omap44xx_sram_init();
 
 	return 0;
 }
diff --git a/arch/arm/plat-orion/include/plat/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h
index d6a4cfa..9f3c180 100644
--- a/arch/arm/plat-orion/include/plat/orion_nand.h
+++ b/arch/arm/plat-orion/include/plat/orion_nand.h
@@ -14,6 +14,7 @@
  */
 struct orion_nand_data {
 	struct mtd_partition *parts;
+	int (*dev_ready)(struct mtd_info *mtd);
 	u32 nr_parts;
 	u8 ale;		/* address line number connected to ALE */
 	u8 cle;		/* address line number connected to CLE */
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
index b158e98..da53395 100644
--- a/arch/arm/plat-pxa/Kconfig
+++ b/arch/arm/plat-pxa/Kconfig
@@ -1,3 +1,8 @@
 if PLAT_PXA
 
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
+
 endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 0264bfb..a17cc0c 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,8 +4,10 @@
 
 obj-y	:= dma.o
 
+obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 2975798..2d3c19d 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
@@ -244,7 +245,7 @@ static void pxa_dma_init_debugfs(void)
 
 	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
 			     GFP_KERNEL);
-	if (!dbgfs_state)
+	if (!dbgfs_chan)
 		goto err_alloc;
 
 	chandir = debugfs_create_dir("channels", dbgfs_root);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 857a683..9e604c8 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -316,6 +316,13 @@ enum {
 	MFP_PIN_PMIC_INT,
 	MFP_PIN_RDY,
 
+	/* additional pins on MMP2 */
+	MFP_PIN_TWSI1_SCL,
+	MFP_PIN_TWSI1_SDA,
+	MFP_PIN_TWSI4_SCL,
+	MFP_PIN_TWSI4_SDA,
+	MFP_PIN_CLK_REQ,
+
 	MFP_PIN_MAX,
 };
 
diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/arch/arm/plat-pxa/include/plat/ssp.h
new file mode 100644
index 0000000..fe43150
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/ssp.h
@@ -0,0 +1,186 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+#include <linux/io.h>
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+#define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */
+
+/* PXA27x, PXA3xx */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+
+/* PXA3xx */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_TIMING_MASK	(0x7f8001f0)
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+	PXA168_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/**
+ * pxa_ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * pxa_ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
+struct ssp_device *pxa_ssp_request(int port, const char *label);
+void pxa_ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index be58f9f..b77e018 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -110,6 +110,7 @@ static const unsigned long mfpr_lpm[] = {
 	MFPR_LPM_PULL_LOW,
 	MFPR_LPM_PULL_HIGH,
 	MFPR_LPM_FLOAT,
+	MFPR_LPM_INPUT,
 };
 
 /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c
new file mode 100644
index 0000000..267ceb6
--- /dev/null
+++ b/arch/arm/plat-pxa/pmu.c
@@ -0,0 +1,33 @@
+/*
+ * PMU IRQ registration for the PXA xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource pmu_resource = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+static int __init pxa_pmu_init(void)
+{
+	platform_device_register(&pmu_device);
+	return 0;
+}
+arch_initcall(pxa_pmu_init);
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index 51dc5c8..0732c6c 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
new file mode 100644
index 0000000..c6357e5
--- /dev/null
+++ b/arch/arm/plat-pxa/ssp.c
@@ -0,0 +1,224 @@
+/*
+ *  linux/arch/arm/mach-pxa/ssp.c
+ *
+ *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
+ *
+ *  Copyright (C) 2003 Russell King.
+ *  Copyright (C) 2003 Wolfson Microelectronics PLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  PXA2xx SSP driver.  This provides the generic core for simple
+ *  IO-based SSP applications and allows easy port setup for DMA access.
+ *
+ *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/ssp.h>
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(&ssp->pdev->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(pxa_ssp_free);
+
+static int __devinit pxa_ssp_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource *res;
+	struct ssp_device *ssp;
+	int ret = 0;
+
+	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory");
+		return -ENOMEM;
+	}
+	ssp->pdev = pdev;
+
+	ssp->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk)) {
+		ret = PTR_ERR(ssp->clk);
+		goto err_free;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+	ssp->drcmr_rx = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+	ssp->drcmr_tx = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+			pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	ssp->phys_base = res->start;
+
+	ssp->mmio_base = ioremap(res->start, resource_size(res));
+	if (ssp->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		ret = -ENODEV;
+		goto err_free_io;
+	}
+
+	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+	 * starts from 0, do a translation here
+	 */
+	ssp->port_id = pdev->id + 1;
+	ssp->use_count = 0;
+	ssp->type = (int)id->driver_data;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	platform_set_drvdata(pdev, ssp);
+	return 0;
+
+err_free_io:
+	iounmap(ssp->mmio_base);
+err_free_mem:
+	release_mem_region(res->start, resource_size(res));
+err_free_clk:
+	clk_put(ssp->clk);
+err_free:
+	kfree(ssp);
+	return ret;
+}
+
+static int __devexit pxa_ssp_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+
+	ssp = platform_get_drvdata(pdev);
+	if (ssp == NULL)
+		return -ENODEV;
+
+	iounmap(ssp->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	clk_put(ssp->clk);
+
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	kfree(ssp);
+	return 0;
+}
+
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ "pxa168-ssp",		PXA168_SSP },
+	{ },
+};
+
+static struct platform_driver pxa_ssp_driver = {
+	.probe		= pxa_ssp_probe,
+	.remove		= __devexit_p(pxa_ssp_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "pxa2xx-ssp",
+	},
+	.id_table	= ssp_id_table,
+};
+
+static int __init pxa_ssp_init(void)
+{
+	return platform_driver_register(&pxa_ssp_driver);
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+	platform_driver_unregister(&pxa_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
+MODULE_DESCRIPTION("PXA SSP driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
deleted file mode 100644
index 9e9d028..0000000
--- a/arch/arm/plat-s3c/Kconfig
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C
-	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
-	default y
-	select NO_IOPORT
-	help
-	  Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-comment "Power management"
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-config S3C_GPIO_PULL_UPDOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_DOWN
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_PULL_UP
-	bool
-	help
-	  Internal configuration to enable the correct GPIO pull helper
-
-config S3C_GPIO_CFG_S3C24XX
-	bool
-	help
-	  Internal configuration to enable S3C24XX style GPIO configuration
-	  functions.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_CFG_S5PC1XX
-	bool
-	help
-	  Internal configuration to enable S5PC1XX style GPIO configuration
-	  functions.
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
deleted file mode 100644
index 50444da..0000000
--- a/arch/arm/plat-s3c/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-# arch/arm/plat-s3c/Makefile
-#
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for all Samsung SoCs
-
-obj-y				+=  init.o
-obj-y				+= time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-obj-y				+= gpio.o
-obj-y				+= gpio-config.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
-
-# devices
-
-obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
-obj-y				+= dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
-obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
deleted file mode 100644
index 619cfa8..0000000
--- a/arch/arm/plat-s3c/clock.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-/* We originally used an mutex here, but some contexts (see resume)
- * are calling functions such as clk_set_parent() with IRQs disabled
- * causing an BUG to be triggered.
- */
-DEFINE_SPINLOCK(clocks_lock);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	spin_lock(&clocks_lock);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
-
-	spin_unlock(&clocks_lock);
-	return clk;
-}
-
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	spin_lock(&clocks_lock);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	spin_unlock(&clocks_lock);
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	spin_lock(&clocks_lock);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	spin_unlock(&clocks_lock);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	/* We do not default just do a clk->rate = rate as
-	 * the clock may have been made this way by choice.
-	 */
-
-	WARN_ON(clk->set_rate == NULL);
-
-	if (clk->set_rate == NULL)
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-	ret = (clk->set_rate)(clk, rate);
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_ext = {
-	.name		= "ext",
-	.id		= -1,
-};
-
-struct clk clk_epll = {
-	.name		= "epll",
-	.id		= -1,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	/* Quick check to see if this clock has already been registered. */
-	BUG_ON(clk->list.prev != clk->list.next);
-
-	spin_lock(&clocks_lock);
-	list_add(&clk->list, &clocks);
-	spin_unlock(&clocks_lock);
-
-	return 0;
-}
-
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-	int fails = 0;
-
-	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0)
-			fails++;
-	}
-
-	return fails;
-}
-
-/* initalise all the clocks */
-
-int __init s3c24xx_register_baseclocks(unsigned long xtal)
-{
-	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
-
-	clk_xtal.rate = xtal;
-
-	/* register our clocks */
-
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
-
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
-
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
-
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
-
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
-
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
-
-	return 0;
-}
-
diff --git a/arch/arm/plat-s3c/dev-fb.c b/arch/arm/plat-s3c/dev-fb.c
deleted file mode 100644
index a90198f..0000000
--- a/arch/arm/plat-s3c/dev-fb.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-fb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for framebuffer device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-fb.h>
-
-#include <plat/fb.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_fb_resource[] = {
-	[0] = {
-		.start = S3C_PA_FB,
-		.end   = S3C_PA_FB + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD_VSYNC,
-		.end   = IRQ_LCD_VSYNC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_LCD_FIFO,
-		.end   = IRQ_LCD_FIFO,
-		.flags = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start = IRQ_LCD_SYSTEM,
-		.end   = IRQ_LCD_SYSTEM,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_fb = {
-	.name		  = "s3c-fb",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
-	.resource	  = s3c_fb_resource,
-	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
-	.dev.coherent_dma_mask = 0xffffffffUL,
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
-	struct s3c_fb_platdata *npd;
-
-	if (!pd) {
-		printk(KERN_ERR "%s: no platform data\n", __func__);
-		return;
-	}
-
-	npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-
-	s3c_device_fb.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
deleted file mode 100644
index 4c76152..0000000
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c0.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC,
-		.end   = S3C_PA_IIC + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC,
-		.end   = IRQ_IIC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c0 = {
-	.name		  = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-	.id		  = 0,
-#else
-	.id		  = -1,
-#endif
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd)
-		pd = &default_i2c_data0;
-
-	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	else if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-
-	s3c_device_i2c0.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
deleted file mode 100644
index d44f791..0000000
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c1.c
- *
- * Copyright 2008-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
-	[0] = {
-		.start = S3C_PA_IIC1,
-		.end   = S3C_PA_IIC1 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IIC1,
-		.end   = IRQ_IIC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_i2c1 = {
-	.name		  = "s3c2410-i2c",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
-	.resource	  = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
-	.flags		= 0,
-	.bus_num	= 1,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd)
-		pd = &default_i2c_data1;
-
-	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
-	if (!npd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	else if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-
-	s3c_device_i2c1.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
deleted file mode 100644
index a52fb6c..0000000
--- a/arch/arm/plat-s3c/dev-nand.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * S3C series device definition for nand device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/nand.h>
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C_PA_NAND,
-		.end   = S3C_PA_NAND + SZ_1M,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
-/**
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-	
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */ 
-
-	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
-	if (!npd) {
-		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
-		return;
-	}
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-		
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-
-	s3c_device_nand.dev.platform_data = npd;
-}
-
-EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dev-usb-hsotg.c b/arch/arm/plat-s3c/dev-usb-hsotg.c
deleted file mode 100644
index e2f604b..0000000
--- a/arch/arm/plat-s3c/dev-usb-hsotg.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB high-speed UDC/OtG block
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = {
-		.start	= S3C_PA_USB_HSOTG,
-		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_OTG,
-		.end	= IRQ_OTG,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_usb_hsotg = {
-	.name		= "s3c-hsotg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
-	.resource	= s3c_usb_hsotg_resources,
-};
diff --git a/arch/arm/plat-s3c/dev-usb.c b/arch/arm/plat-s3c/dev-usb.c
deleted file mode 100644
index 2ee85ab..0000000
--- a/arch/arm/plat-s3c/dev-usb.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-usb.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for USB host
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-
-static struct resource s3c_usb_resource[] = {
-	[0] = {
-		.start = S3C_PA_USBHOST,
-		.end   = S3C_PA_USBHOST + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
-	.name		  = "s3c2410-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
-	.resource	  = s3c_usb_resource,
-	.dev              = {
-		.dma_mask = &s3c_device_usb_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
deleted file mode 100644
index a995850..0000000
--- a/arch/arm/plat-s3c/dma.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* linux/arch/arm/plat-s3c/dma.c
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c2410_dma_buf;
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-#include <plat/dma-plat.h>
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
-
-/* s3c_dma_lookup_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return s3c_dma_chan_map[channel];
-}
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	chan->flags = flags;
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
deleted file mode 100644
index 456969b..0000000
--- a/arch/arm/plat-s3c/gpio-config.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio-config.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO configuration core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	local_irq_save(flags);
-	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	local_irq_restore(flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	local_irq_save(flags);
-	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	local_irq_restore(flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
-				  unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-			    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
-int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-				 unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
-
-#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
-int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-			    unsigned int off, s3c_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-	return (__force s3c_gpio_pull_t)pup;
-}
-#endif
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
deleted file mode 100644
index 5ff24e0..0000000
--- a/arch/arm/plat-s3c/gpio.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/plat-s3c/gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-core.h>
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/* Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int s3c_gpiolib_output(struct gpio_chip *chip,
-			      unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-static void s3c_gpiolib_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	if (!gc->direction_input)
-		gc->direction_input = s3c_gpiolib_input;
-	if (!gc->direction_output)
-		gc->direction_output = s3c_gpiolib_output;
-	if (!gc->set)
-		gc->set = s3c_gpiolib_set;
-	if (!gc->get)
-		gc->get = s3c_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h
deleted file mode 100644
index f6a5363..0000000
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/plat-s3c/include/mach/io.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h
deleted file mode 100644
index 2a425ed..0000000
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-
-#define CLOCK_TICK_RATE 12000000
-
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h
deleted file mode 100644
index bfd2ca6..0000000
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
- *
- * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
deleted file mode 100644
index 5f3b1cd..0000000
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/adc.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simnte.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX ADC driver information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
-
-struct s3c_adc_client;
-
-extern int s3c_adc_start(struct s3c_adc_client *client,
-			 unsigned int channel, unsigned int nr_samples);
-
-extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
-
-extern struct s3c_adc_client *
-	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(struct s3c_adc_client *client,
-					unsigned selected),
-			 void (*conv)(struct s3c_adc_client *client,
-				      unsigned d0, unsigned d1,
-				      unsigned *samples_left),
-			 unsigned int is_ts);
-
-extern void s3c_adc_release(struct s3c_adc_client *client);
-
-#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
deleted file mode 100644
index 53a9365..0000000
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h
deleted file mode 100644
index f22d23b..0000000
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-};
diff --git a/arch/arm/plat-s3c/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h
deleted file mode 100644
index d86af84..0000000
--- a/arch/arm/plat-s3c/include/plat/clock.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/spinlock.h>
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s3c64xx_register_clocks(void);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
-				 unsigned long hclk,
-				 unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-extern void s3c2443_setup_clocks(void);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
deleted file mode 100644
index 94eb06a..0000000
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - driver and board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/cpufreq.h>
-
-struct s3c_cpufreq_info;
-struct s3c_cpufreq_board;
-struct s3c_iotimings;
-
-/**
- * struct s3c_freq - frequency information (mainly for core drivers)
- * @fclk: The FCLK frequency in Hz.
- * @armclk: The ARMCLK frequency in Hz.
- * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
- * @hclk: The HCLK frequency in Hz.
- * @pclk: The PCLK frequency in Hz.
- *
- * This contains the frequency information about the current configuration
- * mainly for the core drivers to ensure we do not end up passing about
- * a large number of parameters.
- *
- * The @hclk_tns field is a useful cache for the parts of the drivers that
- * need to calculate IO timings and suchlike.
- */
-struct s3c_freq {
-	unsigned long	fclk;
-	unsigned long	armclk;
-	unsigned long	hclk_tns;	/* in 10ths of ns */
-	unsigned long	hclk;
-	unsigned long	pclk;
-};
-
-/**
- * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
- * @freqs: The cpufreq setting information.
- * @old: The old clock settings.
- * @new: The new clock settings.
- * @pll_changing: Set if the PLL is changing.
- *
- * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
- * notification can use this information that is not provided by just
- * having the core frequency alone.
- *
- * The pll_changing flag is used to indicate if the PLL itself is
- * being set during this change. This is important as the clocks
- * will temporarily be set to the XTAL clock during this time, so
- * drivers may want to close down their output during this time.
- *
- * Note, this is not being used by any current drivers and therefore
- * may be removed in the future.
- */
-struct s3c_cpufreq_freqs {
-	struct cpufreq_freqs	freqs;
-	struct s3c_freq		old;
-	struct s3c_freq		new;
-
-	unsigned int		pll_changing:1;
-};
-
-#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
-
-/**
- * struct s3c_clkdivs - clock divisor information
- * @p_divisor: Divisor from FCLK to PCLK.
- * @h_divisor: Divisor from FCLK to HCLK.
- * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
- * @dvs: Non-zero if using DVS mode for ARMCLK.
- *
- * Divisor settings for the core clocks.
- */
-struct s3c_clkdivs {
-	int		p_divisor;
-	int		h_divisor;
-	int		arm_divisor;
-	unsigned char	dvs;
-};
-
-#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
-
-/**
- * struct s3c_pllval - PLL value entry.
- * @freq: The frequency for this entry in Hz.
- * @pll_reg: The PLL register setting for this PLL value.
- */
-struct s3c_pllval {
-	unsigned long		freq;
-	unsigned long		pll_reg;
-};
-
-/**
- * struct s3c_cpufreq_board - per-board cpu frequency informatin
- * @refresh: The SDRAM refresh period in nanoseconds.
- * @auto_io: Set if the IO timing settings should be generated from the
- *	initialisation time hardware registers.
- * @need_io: Set if the board has external IO on any of the chipselect
- *	lines that will require the hardware timing registers to be
- *	updated on a clock change.
- * @max: The maxium frequency limits for the system. Any field that
- *	is left at zero will use the CPU's settings.
- *
- * This contains the board specific settings that affect how the CPU
- * drivers chose settings. These include the memory refresh and IO
- * timing information.
- *
- * Registration depends on the driver being used, the ARMCLK only
- * implementation does not currently need this but the older style
- * driver requires this to be available.
- */
-struct s3c_cpufreq_board {
-	unsigned int	refresh;
-	unsigned int	auto_io:1;	/* automatically init io timings. */
-	unsigned int	need_io:1;	/* set if needs io timing support. */
-
-	/* any non-zero field in here is taken as an upper limit. */
-	struct s3c_freq	max;	/* frequency limits */
-};
-
-/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
-#define __init_or_cpufreq
-#else
-#define __init_or_cpufreq __init
-#endif
-
-/* Board functions */
-
-#ifdef CONFIG_CPU_FREQ_S3C
-extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
-#else
-
-static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	return 0;
-}
-#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
deleted file mode 100644
index d1131ca..0000000
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/cpu.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#ifndef __SAMSUNG_PLAT_CPU_H
-#define __SAMSUNG_PLAT_CPU_H
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* per-cpu initialisation function table. */
-
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(void);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
-extern void s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cpus, unsigned int cputab_size);
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2410a_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
-extern struct sysdev_class s3c2443_sysclass;
-extern struct sysdev_class s3c6410_sysclass;
-extern struct sysdev_class s3c64xx_sysclass;
-
-extern void (*s5pc1xx_idle)(void);
-
-#endif
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S
deleted file mode 100644
index 3634d4e..0000000
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
- *
- * Copyright 2005, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-serial.h>
-
-/* The S3C2440 implementations are used by default as they are the
- * most widely re-used */
-
-	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-#ifndef fifo_level
-#define fifo_level fifo_level_s3c2440
-#endif
-
-	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2440_UFSTAT_TXFULL
-	.endm
-
-#ifndef fifo_full
-#define fifo_full fifo_full_s3c2440
-#endif
-
-	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-	.endm
-
-	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_full \rd, \rx
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
-
-	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_level \rd, \rx
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
deleted file mode 100644
index c1c20b0..0000000
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c_device_timer[];
-
-extern struct platform_device s3c64xx_device_iis0;
-extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
-
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_usb;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c0;
-extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s3c_device_hwmon;
-
-extern struct platform_device s3c_device_nand;
-
-extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsotg;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
deleted file mode 100644
index e429d10..0000000
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
-	S3C2410_DMASRC_HW,		/* source is memory */
-	S3C2410_DMASRC_MEM		/* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
deleted file mode 100644
index f8db879..0000000
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - FB platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_FB_H
-#define __PLAT_S3C_FB_H __FILE__
-
-/**
- * struct s3c_fb_pd_win - per window setup data
- * @win_mode: The display parameters to initialise (not for window 0)
- * @virtual_x: The virtual X size.
- * @virtual_y: The virtual Y size.
- */
-struct s3c_fb_pd_win {
-	struct fb_videomode	win_mode;
-
-	unsigned short		default_bpp;
-	unsigned short		max_bpp;
-	unsigned short		virtual_x;
-	unsigned short		virtual_y;
-};
-
-/**
- * struct s3c_fb_platdata -  S3C driver platform specific information
- * @setup_gpio: Setup the external GPIO pins to the right state to transfer
- *		the data from the display system to the connected display
- *		device.
- * @vidcon0: The base vidcon0 values to control the panel data format.
- * @vidcon1: The base vidcon1 values to control the panel data output.
- * @win: The setup data for each hardware window, or NULL for unused.
- * @display_mode: The LCD output display mode.
- *
- * The platform data supplies the video driver with all the information
- * it requires to work with the display(s) attached to the machine. It
- * controls the initial mode, the number of display windows (0 is always
- * the base framebuffer) that are initialised etc.
- *
- */
-struct s3c_fb_platdata {
-	void	(*setup_gpio)(void);
-
-	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
-
-	u32			 vidcon0;
-	u32			 vidcon1;
-};
-
-/**
- * s3c_fb_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s3c64xx_fb_gpio_setup_24bpp(void);
-
-/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
-#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
deleted file mode 100644
index 652e2bb..0000000
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration helper definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This is meant for core cpu support, machine or other driver files
- * should not be including this header.
- */
-
-#ifndef __PLAT_GPIO_CFG_HELPERS_H
-#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
-
-/* As a note, all gpio configuration functions are entered exclusively, either
- * with the relevant lock held or the system prevented from doing anything else
- * by disabling interrupts.
-*/
-
-static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int config)
-{
-	return (chip->config->set_config)(chip, off, config);
-}
-
-static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
-				      unsigned int off, s3c_gpio_pull_t pull)
-{
-	return (chip->config->set_pull)(chip, off, pull);
-}
-
-/**
- * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
-*/
-extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
-*/
-extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg);
-
-/**
- * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependant on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
- * each case.
-*/
-extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
-					unsigned int off, unsigned int cfg);
-
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440,S3C24A0 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
-				  unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
-				   unsigned int off, s3c_gpio_pull_t pull);
-
-
-/**
- * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
-					       unsigned int off);
-
-/**
- * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
-				    unsigned int off, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as s3c_gpio_setpull_upown.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
-						unsigned int off);
-
-#endif /* __PLAT_GPIO_CFG_HELPERS_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h
deleted file mode 100644
index 29cd6a8..0000000
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-/* Note, this interface is being added to the s3c64xx arch first and will
- * be added to the s3c24xx systems later.
- */
-
-#ifndef __PLAT_GPIO_CFG_H
-#define __PLAT_GPIO_CFG_H __FILE__
-
-typedef unsigned int __bitwise__ s3c_gpio_pull_t;
-
-/* forward declaration if gpio-core.h hasn't been included */
-struct s3c_gpio_chip;
-
-/**
- * struct s3c_gpio_cfg GPIO configuration
- * @cfg_eint: Configuration setting when used for external interrupt source
- * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
- * @set_config: Set the current configuration for the GPIO
- * @get_config: Read the current configuration for the GPIO
- *
- * Each chip can have more than one type of GPIO bank available and some
- * have different capabilites even when they have the same control register
- * layouts. Provide an point to vector control routine and provide any
- * per-bank configuration information that other systems such as the
- * external interrupt code will need.
- */
-struct s3c_gpio_cfg {
-	unsigned int	cfg_eint;
-
-	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
-				    s3c_gpio_pull_t pull);
-
-	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
-			       unsigned config);
-};
-
-#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
-#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
-
-/* Defines for generic pin configurations */
-#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
-#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
-#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
-
-#define s3c_gpio_is_cfg_special(_cfg) \
-	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
-
-/**
- * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
- * @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
- *
- * Configure which function is actually connected to the external
- * pin, such as an gpio input, output or some form of special function
- * connected to an internal peripheral block.
- */
-extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-
-/* Define values for the pull-{up,down} available for each gpio pin.
- *
- * These values control the state of the weak pull-{up,down} resistors
- * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
- * used to whether the particular mode is available.
- */
-#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
-
-/**
- * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
- * @pin: The pin number to configure the pull resistor.
- * @pull: The configuration for the pull resistor.
- *
- * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
- * code if the pin cannot support the requested pull setting.
-*/
-extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
-#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h
deleted file mode 100644
index 32af612..0000000
--- a/arch/arm/plat-s3c/include/plat/gpio-core.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Define the core gpiolib support functions that the s3c platforms may
- * need to extend or change depending on the hardware and the s3c chip
- * selected at build or found at run time.
- *
- * These definitions are not intended for driver inclusion, there is
- * nothing here that should not live outside the platform and core
- * specific code.
-*/
-
-struct s3c_gpio_chip;
-
-/**
- * struct s3c_gpio_pm - power management (suspend/resume) information
- * @save: Routine to save the state of the GPIO block
- * @resume: Routine to resume the GPIO block.
- */
-struct s3c_gpio_pm {
-	void (*save)(struct s3c_gpio_chip *chip);
-	void (*resume)(struct s3c_gpio_chip *chip);
-};
-
-struct s3c_gpio_cfg;
-
-/**
- * struct s3c_gpio_chip - wrapper for specific implementation of gpio
- * @chip: The chip structure to be exported via gpiolib.
- * @base: The base pointer to the gpio configuration registers.
- * @config: special function and pull-resistor control information.
- * @pm_save: Save information for suspend/resume support.
- *
- * This wrapper provides the necessary information for the Samsung
- * specific gpios being registered with gpiolib.
- */
-struct s3c_gpio_chip {
-	struct gpio_chip	chip;
-	struct s3c_gpio_cfg	*config;
-	struct s3c_gpio_pm	*pm;
-	void __iomem		*base;
-#ifdef CONFIG_PM
-	u32			pm_save[4];
-#endif
-};
-
-static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
-{
-	return container_of(gpc, struct s3c_gpio_chip, chip);
-}
-
-/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
-
-/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own s3c_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
-{
-	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
-}
-#else
-/* machine specific code should provide s3c_gpiolib_getchip */
-
-static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
-#endif
-
-#ifdef CONFIG_PM
-extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
-extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
-#define __gpio_pm(x) x
-#else
-#define s3c_gpio_pm_1bit NULL
-#define s3c_gpio_pm_2bit NULL
-#define s3c_gpio_pm_4bit NULL
-#define __gpio_pm(x) NULL
-
-#endif /* CONFIG_PM */
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
deleted file mode 100644
index 1ba88ea..0000000
--- a/arch/arm/plat-s3c/include/plat/hwmon.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h
deleted file mode 100644
index 36397ca..0000000
--- a/arch/arm/plat-s3c/include/plat/iic-core.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_CORE_H
-#define __ASM_ARCH_IIC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_i2c0_setname(char *name)
-{
-	/* currently this device is always compiled in */
-	s3c_device_i2c0.name = name;
-}
-
-static inline void s3c_i2c1_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C1
-	s3c_device_i2c1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
deleted file mode 100644
index 3083df0..0000000
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
deleted file mode 100644
index 226147b..0000000
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h
deleted file mode 100644
index 7a79719..0000000
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c_pm_init(void);
-
-#else
-
-static inline int s3c_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
-
-/* from sleep.S */
-
-extern int  s3c_cpu_save(unsigned long *saveblk);
-extern void s3c_cpu_resume(void);
-
-extern void s3c2410_cpu_suspend(void);
-
-extern unsigned long s3c_sleep_save_phys;
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
-	u32	ulcon;
-	u32	ucon;
-	u32	ufcon;
-	u32	umcon;
-	u32	ubrdiv;
-	u32	udivslot;
-};
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-/* PM debug functions */
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-#else
-#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
-/* suspend memory checking */
-
-#ifdef CONFIG_S3C2410_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while(0)
-#define s3c_pm_check_restore() do { } while(0)
-#define s3c_pm_check_cleanup() do { } while(0)
-#define s3c_pm_check_store()   do { } while(0)
-#endif
-
-/**
- * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
- *
- * Setup all the necessary GPIO pins for waking the system on external
- * interrupt.
- */
-extern void s3c_pm_configure_extint(void);
-
-/**
- * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
- *
- * Restore the state of the GPIO pins after sleep, which may involve ensuring
- * that we do not glitch the state of the pins from that the bootloader's
- * resume code has done.
-*/
-extern void s3c_pm_restore_gpios(void);
-
-/**
- * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
- *
- * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
- */
-extern void s3c_pm_save_gpios(void);
-
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
-extern void s3c_pm_save_core(void);
-extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-adc.h b/arch/arm/plat-s3c/include/plat/regs-adc.h
deleted file mode 100644
index 4323ccc..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-adc.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-
-
-/* ADCCON Register Bits */
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
deleted file mode 100644
index a60ed0d..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-/* Palette control */
-/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
- * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
-
-
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-s3c/include/plat/regs-fb.h
deleted file mode 100644
index e9ee599..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-fb.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
- * S3C64XX series such as the S3C6400 and S3C6410.
- *
- * The file does not contain the cpu specific items which are based on
- * whichever architecture is selected, it only contains the core of the
- * register set. See <mach/regs-fb.h> to get the specifics.
- *
- * Note, we changed to using regs-fb.h as it avoids any clashes with
- * the original regs-lcd.h so out of the way of regs-lcd.h as well as
- * indicating the newer block is much more than just an LCD interface.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Please do not include this file directly, use <mach/regs-fb.h> to
- * ensure all the localised SoC support is included as necessary.
-*/
-
-/* VIDCON0 */
-
-#define VIDCON0					(0x00)
-#define VIDCON0_INTERLACE			(1 << 29)
-#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
-#define VIDCON0_VIDOUT_SHIFT			(26)
-#define VIDCON0_VIDOUT_RGB			(0x0 << 26)
-#define VIDCON0_VIDOUT_TV			(0x1 << 26)
-#define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
-#define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
-
-#define VIDCON0_L1_DATA_MASK			(0x7 << 23)
-#define VIDCON0_L1_DATA_SHIFT			(23)
-#define VIDCON0_L1_DATA_16BPP			(0x0 << 23)
-#define VIDCON0_L1_DATA_18BPP16			(0x1 << 23)
-#define VIDCON0_L1_DATA_18BPP9			(0x2 << 23)
-#define VIDCON0_L1_DATA_24BPP			(0x3 << 23)
-#define VIDCON0_L1_DATA_18BPP			(0x4 << 23)
-#define VIDCON0_L1_DATA_16BPP8			(0x5 << 23)
-
-#define VIDCON0_L0_DATA_MASK			(0x7 << 20)
-#define VIDCON0_L0_DATA_SHIFT			(20)
-#define VIDCON0_L0_DATA_16BPP			(0x0 << 20)
-#define VIDCON0_L0_DATA_18BPP16			(0x1 << 20)
-#define VIDCON0_L0_DATA_18BPP9			(0x2 << 20)
-#define VIDCON0_L0_DATA_24BPP			(0x3 << 20)
-#define VIDCON0_L0_DATA_18BPP			(0x4 << 20)
-#define VIDCON0_L0_DATA_16BPP8			(0x5 << 20)
-
-#define VIDCON0_PNRMODE_MASK			(0x3 << 17)
-#define VIDCON0_PNRMODE_SHIFT			(17)
-#define VIDCON0_PNRMODE_RGB			(0x0 << 17)
-#define VIDCON0_PNRMODE_BGR			(0x1 << 17)
-#define VIDCON0_PNRMODE_SERIAL_RGB		(0x2 << 17)
-#define VIDCON0_PNRMODE_SERIAL_BGR		(0x3 << 17)
-
-#define VIDCON0_CLKVALUP			(1 << 16)
-#define VIDCON0_CLKVAL_F_MASK			(0xff << 6)
-#define VIDCON0_CLKVAL_F_SHIFT			(6)
-#define VIDCON0_CLKVAL_F_LIMIT			(0xff)
-#define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
-#define VIDCON0_VLCKFREE			(1 << 5)
-#define VIDCON0_CLKDIR				(1 << 4)
-
-#define VIDCON0_CLKSEL_MASK			(0x3 << 2)
-#define VIDCON0_CLKSEL_SHIFT			(2)
-#define VIDCON0_CLKSEL_HCLK			(0x0 << 2)
-#define VIDCON0_CLKSEL_LCD			(0x1 << 2)
-#define VIDCON0_CLKSEL_27M			(0x3 << 2)
-
-#define VIDCON0_ENVID				(1 << 1)
-#define VIDCON0_ENVID_F				(1 << 0)
-
-#define VIDCON1					(0x04)
-#define VIDCON1_LINECNT_MASK			(0x7ff << 16)
-#define VIDCON1_LINECNT_SHIFT			(16)
-#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
-#define VIDCON1_VSTATUS_MASK			(0x3 << 13)
-#define VIDCON1_VSTATUS_SHIFT			(13)
-#define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
-#define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
-#define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
-#define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
-
-#define VIDCON1_INV_VCLK			(1 << 7)
-#define VIDCON1_INV_HSYNC			(1 << 6)
-#define VIDCON1_INV_VSYNC			(1 << 5)
-#define VIDCON1_INV_VDEN			(1 << 4)
-
-/* VIDCON2 */
-
-#define VIDCON2					(0x08)
-#define VIDCON2_EN601				(1 << 23)
-#define VIDCON2_TVFMTSEL_SW			(1 << 14)
-
-#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
-#define VIDCON2_TVFMTSEL1_SHIFT			(12)
-#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
-#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
-#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
-
-#define VIDCON2_ORGYCbCr			(1 << 8)
-#define VIDCON2_YUVORDCrCb			(1 << 7)
-
-/* VIDTCON0 */
-
-#define VIDTCON0_VBPDE_MASK			(0xff << 24)
-#define VIDTCON0_VBPDE_SHIFT			(24)
-#define VIDTCON0_VBPDE_LIMIT			(0xff)
-#define VIDTCON0_VBPDE(_x)			((_x) << 24)
-
-#define VIDTCON0_VBPD_MASK			(0xff << 16)
-#define VIDTCON0_VBPD_SHIFT			(16)
-#define VIDTCON0_VBPD_LIMIT			(0xff)
-#define VIDTCON0_VBPD(_x)			((_x) << 16)
-
-#define VIDTCON0_VFPD_MASK			(0xff << 8)
-#define VIDTCON0_VFPD_SHIFT			(8)
-#define VIDTCON0_VFPD_LIMIT			(0xff)
-#define VIDTCON0_VFPD(_x)			((_x) << 8)
-
-#define VIDTCON0_VSPW_MASK			(0xff << 0)
-#define VIDTCON0_VSPW_SHIFT			(0)
-#define VIDTCON0_VSPW_LIMIT			(0xff)
-#define VIDTCON0_VSPW(_x)			((_x) << 0)
-
-/* VIDTCON1 */
-
-#define VIDTCON1_VFPDE_MASK			(0xff << 24)
-#define VIDTCON1_VFPDE_SHIFT			(24)
-#define VIDTCON1_VFPDE_LIMIT			(0xff)
-#define VIDTCON1_VFPDE(_x)			((_x) << 24)
-
-#define VIDTCON1_HBPD_MASK			(0xff << 16)
-#define VIDTCON1_HBPD_SHIFT			(16)
-#define VIDTCON1_HBPD_LIMIT			(0xff)
-#define VIDTCON1_HBPD(_x)			((_x) << 16)
-
-#define VIDTCON1_HFPD_MASK			(0xff << 8)
-#define VIDTCON1_HFPD_SHIFT			(8)
-#define VIDTCON1_HFPD_LIMIT			(0xff)
-#define VIDTCON1_HFPD(_x)			((_x) << 8)
-
-#define VIDTCON1_HSPW_MASK			(0xff << 0)
-#define VIDTCON1_HSPW_SHIFT			(0)
-#define VIDTCON1_HSPW_LIMIT			(0xff)
-#define VIDTCON1_HSPW(_x)			((_x) << 0)
-
-#define VIDTCON2				(0x18)
-#define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
-#define VIDTCON2_LINEVAL_SHIFT			(11)
-#define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
-#define VIDTCON2_LINEVAL(_x)			((_x) << 11)
-
-#define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
-#define VIDTCON2_HOZVAL_SHIFT			(0)
-#define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
-#define VIDTCON2_HOZVAL(_x)			((_x) << 0)
-
-/* WINCONx */
-
-
-#define WINCONx_BITSWP				(1 << 18)
-#define WINCONx_BYTSWP				(1 << 17)
-#define WINCONx_HAWSWP				(1 << 16)
-#define WINCONx_BURSTLEN_MASK			(0x3 << 9)
-#define WINCONx_BURSTLEN_SHIFT			(9)
-#define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
-#define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
-#define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
-
-#define WINCONx_ENWIN				(1 << 0)
-#define WINCON0_BPPMODE_MASK			(0xf << 2)
-#define WINCON0_BPPMODE_SHIFT			(2)
-#define WINCON0_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON0_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON0_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON0_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON0_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON0_BPPMODE_16BPP_1555		(0x7 << 2)
-#define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
-
-#define WINCON1_BLD_PIX				(1 << 6)
-
-#define WINCON1_ALPHA_SEL			(1 << 1)
-#define WINCON1_BPPMODE_MASK			(0xf << 2)
-#define WINCON1_BPPMODE_SHIFT			(2)
-#define WINCON1_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON1_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON1_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON1_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON1_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON1_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON1_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON1_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON1_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON1_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON1_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON1_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
-
-
-#define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
-#define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
-#define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_X(_x)			((_x) << 11)
-
-#define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
-#define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
-#define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_Y(_x)			((_x) << 0)
-
-#define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
-#define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
-#define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_X(_x)			((_x) << 11)
-
-#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
-#define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
-#define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_Y(_x)			((_x) << 0)
-
-/* For VIDOSD[1..4]C */
-#define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
-#define VIDISD14C_ALPHA0_G_MASK			(0xf << 16)
-#define VIDISD14C_ALPHA0_G_SHIFT		(16)
-#define VIDISD14C_ALPHA0_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_G(_x)			((_x) << 16)
-#define VIDISD14C_ALPHA0_B_MASK			(0xf << 12)
-#define VIDISD14C_ALPHA0_B_SHIFT		(12)
-#define VIDISD14C_ALPHA0_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_B(_x)			((_x) << 12)
-#define VIDISD14C_ALPHA1_R_MASK			(0xf << 8)
-#define VIDISD14C_ALPHA1_R_SHIFT		(8)
-#define VIDISD14C_ALPHA1_R_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_R(_x)			((_x) << 8)
-#define VIDISD14C_ALPHA1_G_MASK			(0xf << 4)
-#define VIDISD14C_ALPHA1_G_SHIFT		(4)
-#define VIDISD14C_ALPHA1_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_G(_x)			((_x) << 4)
-#define VIDISD14C_ALPHA1_B_MASK			(0xf << 0)
-#define VIDISD14C_ALPHA1_B_SHIFT		(0)
-#define VIDISD14C_ALPHA1_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_B(_x)			((_x) << 0)
-
-/* Video buffer addresses */
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
-#define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
-#define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_OFFSET(_x)		((_x) << 13)
-
-#define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		((_x) << 0)
-
-/* Interrupt controls and status */
-
-#define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
-#define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
-#define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
-#define VIDINTCON0_FIFOINTERVAL(_x)		((_x) << 20)
-
-#define VIDINTCON0_INT_SYSMAINCON		(1 << 19)
-#define VIDINTCON0_INT_SYSSUBCON		(1 << 18)
-#define VIDINTCON0_INT_I80IFDONE		(1 << 17)
-
-#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
-#define VIDINTCON0_FRAMESEL0_SHIFT		(15)
-#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
-#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
-#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
-#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
-
-#define VIDINTCON0_FRAMESEL1			(1 << 14)
-#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 14)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 14)
-#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 14)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 14)
-
-#define VIDINTCON0_INT_FRAME			(1 << 12)
-#define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
-#define VIDINTCON0_FIFIOSEL_SHIFT		(5)
-#define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
-
-#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
-#define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
-#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x0 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x1 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO75PC		(0x2 << 2)
-#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x3 << 2)
-#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 2)
-
-#define VIDINTCON0_INT_FIFO_MASK		(0x3 << 0)
-#define VIDINTCON0_INT_FIFO_SHIFT		(0)
-#define VIDINTCON0_INT_ENABLE			(1 << 0)
-
-#define VIDINTCON1				(0x134)
-#define VIDINTCON1_INT_I180			(1 << 2)
-#define VIDINTCON1_INT_FRAME			(1 << 1)
-#define VIDINTCON1_INT_FIFO			(1 << 0)
-
-/* Window colour-key control registers */
-
-#define WxKEYCON0_KEYBL_EN			(1 << 26)
-#define WxKEYCON0_KEYEN_F			(1 << 25)
-#define WxKEYCON0_DIRCON			(1 << 24)
-#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
-#define WxKEYCON0_COMPKEY_SHIFT			(0)
-#define WxKEYCON0_COMPKEY_LIMIT			(0xffffff)
-#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
-#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
-#define WxKEYCON1_COLVAL_SHIFT			(0)
-#define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
-#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
-
-
-/* Window blanking (MAP) */
-
-#define WINxMAP_MAP				(1 << 24)
-#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
-#define WINxMAP_MAP_COLOUR_SHIFT		(0)
-#define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
-#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
-
-#define WPALCON_PAL_UPDATE			(1 << 9)
-#define WPALCON_W1PAL_MASK			(0x7 << 3)
-#define WPALCON_W1PAL_SHIFT			(3)
-#define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
-#define WPALCON_W1PAL_24BPP			(0x1 << 3)
-#define WPALCON_W1PAL_19BPP_A666		(0x2 << 3)
-#define WPALCON_W1PAL_18BPP_A665		(0x3 << 3)
-#define WPALCON_W1PAL_18BPP			(0x4 << 3)
-#define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
-#define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
-
-#define WPALCON_W0PAL_MASK			(0x7 << 0)
-#define WPALCON_W0PAL_SHIFT			(0)
-#define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
-#define WPALCON_W0PAL_24BPP			(0x1 << 0)
-#define WPALCON_W0PAL_19BPP_A666		(0x2 << 0)
-#define WPALCON_W0PAL_18BPP_A665		(0x3 << 0)
-#define WPALCON_W0PAL_18BPP			(0x4 << 0)
-#define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
-#define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-rtc.h b/arch/arm/plat-s3c/include/plat/regs-rtc.h
deleted file mode 100644
index d5837cf..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-rtc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Internal RTC register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_RTC_H
-#define __ASM_ARCH_REGS_RTC_H __FILE__
-
-#define S3C2410_RTCREG(x) (x)
-
-#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN  (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-
-#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE  (1<<7)
-
-#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN  (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN  (1<<4)
-#define S3C2410_RTCALM_DAYEN  (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN  (1<<1)
-#define S3C2410_RTCALM_SECEN  (1<<0)
-
-#define S3C2410_RTCALM_ALL \
-  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
-  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
-  S3C2410_RTCALM_SECEN
-
-
-#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
-
-
-#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
deleted file mode 100644
index abf2fbc..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
- *
- * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
-#define __ASM_ARCH_REGS_S3C2412_IIS_H
-
-#define S3C2412_IISCON			(0x00)
-#define S3C2412_IISMOD			(0x04)
-#define S3C2412_IISFIC			(0x08)
-#define S3C2412_IISPSR			(0x0C)
-#define S3C2412_IISTXD			(0x10)
-#define S3C2412_IISRXD			(0x14)
-
-#define S3C2412_IISCON_LRINDEX		(1 << 11)
-#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
-#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
-#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
-#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
-#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
-#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
-#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
-#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
-#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
-#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
-#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
-
-#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
-#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
-#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
-#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
-
-#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
-#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
-
-#define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
-#define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
-#define S3C2412_IISMOD_SLAVE		(2 << 10)
-#define S3C2412_IISMOD_MASTER_MASK	(3 << 10)
-#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
-#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
-#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
-#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
-#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
-#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
-#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
-#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
-#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
-#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
-#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
-#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
-#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
-#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
-#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
-#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
-#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
-#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
-#define S3C2412_IISMOD_8BIT		(1 << 0)
-
-#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
-
-#define S3C2412_IISPSR_PSREN		(1 << 15)
-
-#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
-#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
-#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
-#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
-
-
-
-#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
deleted file mode 100644
index 85d8904..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
- *
- *  From linux/include/asm-arm/hardware/serial_s3c2410.h
- *
- *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
- *
- *  Adapted from:
- *
- *  Internal header file for MX1ADS serial ports (UART1 & 2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-#define S3C2410_URXH	  (0x24)
-#define S3C2410_UTXH	  (0x20)
-#define S3C2410_ULCON	  (0x00)
-#define S3C2410_UCON	  (0x04)
-#define S3C2410_UFCON	  (0x08)
-#define S3C2410_UMCON	  (0x0C)
-#define S3C2410_UBRDIV	  (0x28)
-#define S3C2410_UTRSTAT	  (0x10)
-#define S3C2410_UERSTAT	  (0x14)
-#define S3C2410_UFSTAT	  (0x18)
-#define S3C2410_UMSTAT	  (0x1C)
-
-#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
-
-#define S3C2410_LCON_CS5	  (0x0)
-#define S3C2410_LCON_CS6	  (0x1)
-#define S3C2410_LCON_CS7	  (0x2)
-#define S3C2410_LCON_CS8	  (0x3)
-#define S3C2410_LCON_CSMASK	  (0x3)
-
-#define S3C2410_LCON_PNONE	  (0x0)
-#define S3C2410_LCON_PEVEN	  (0x5 << 3)
-#define S3C2410_LCON_PODD	  (0x4 << 3)
-#define S3C2410_LCON_PMASK	  (0x7 << 3)
-
-#define S3C2410_LCON_STOPB	  (1<<2)
-#define S3C2410_LCON_IRM          (1<<6)
-
-#define S3C2440_UCON_CLKMASK	  (3<<10)
-#define S3C2440_UCON_PCLK	  (0<<10)
-#define S3C2440_UCON_UCLK	  (1<<10)
-#define S3C2440_UCON_PCLK2	  (2<<10)
-#define S3C2440_UCON_FCLK	  (3<<10)
-#define S3C2443_UCON_EPLL	  (3<<10)
-
-#define S3C6400_UCON_CLKMASK	(3<<10)
-#define S3C6400_UCON_PCLK	(0<<10)
-#define S3C6400_UCON_PCLK2	(2<<10)
-#define S3C6400_UCON_UCLK0	(1<<10)
-#define S3C6400_UCON_UCLK1	(3<<10)
-
-#define S3C2440_UCON2_FCLK_EN	  (1<<15)
-#define S3C2440_UCON0_DIVMASK	  (15 << 12)
-#define S3C2440_UCON1_DIVMASK	  (15 << 12)
-#define S3C2440_UCON2_DIVMASK	  (7 << 12)
-#define S3C2440_UCON_DIVSHIFT	  (12)
-
-#define S3C2412_UCON_CLKMASK	(3<<10)
-#define S3C2412_UCON_UCLK	(1<<10)
-#define S3C2412_UCON_USYSCLK	(3<<10)
-#define S3C2412_UCON_PCLK	(0<<10)
-#define S3C2412_UCON_PCLK2	(2<<10)
-
-#define S3C2410_UCON_UCLK	  (1<<10)
-#define S3C2410_UCON_SBREAK	  (1<<4)
-
-#define S3C2410_UCON_TXILEVEL	  (1<<9)
-#define S3C2410_UCON_RXILEVEL	  (1<<8)
-#define S3C2410_UCON_TXIRQMODE	  (1<<2)
-#define S3C2410_UCON_RXIRQMODE	  (1<<0)
-#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
-#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
-
-#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
-				   S3C2410_UCON_RXILEVEL  | \
-				   S3C2410_UCON_TXIRQMODE | \
-				   S3C2410_UCON_RXIRQMODE | \
-				   S3C2410_UCON_RXFIFO_TOI)
-
-#define S3C2410_UFCON_FIFOMODE	  (1<<0)
-#define S3C2410_UFCON_TXTRIG0	  (0<<6)
-#define S3C2410_UFCON_RXTRIG8	  (1<<4)
-#define S3C2410_UFCON_RXTRIG12	  (2<<4)
-
-/* S3C2440 FIFO trigger levels */
-#define S3C2440_UFCON_RXTRIG1	  (0<<4)
-#define S3C2440_UFCON_RXTRIG8	  (1<<4)
-#define S3C2440_UFCON_RXTRIG16	  (2<<4)
-#define S3C2440_UFCON_RXTRIG32	  (3<<4)
-
-#define S3C2440_UFCON_TXTRIG0	  (0<<6)
-#define S3C2440_UFCON_TXTRIG16	  (1<<6)
-#define S3C2440_UFCON_TXTRIG32	  (2<<6)
-#define S3C2440_UFCON_TXTRIG48	  (3<<6)
-
-#define S3C2410_UFCON_RESETBOTH	  (3<<1)
-#define S3C2410_UFCON_RESETTX	  (1<<2)
-#define S3C2410_UFCON_RESETRX	  (1<<1)
-
-#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
-				   S3C2410_UFCON_TXTRIG0  | \
-				   S3C2410_UFCON_RXTRIG8 )
-
-#define	S3C2410_UMCOM_AFC	  (1<<4)
-#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
-
-#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
-#define S3C2412_UMCON_AFC_56	(1<<5)
-#define S3C2412_UMCON_AFC_48	(2<<5)
-#define S3C2412_UMCON_AFC_40	(3<<5)
-#define S3C2412_UMCON_AFC_32	(4<<5)
-#define S3C2412_UMCON_AFC_24	(5<<5)
-#define S3C2412_UMCON_AFC_16	(6<<5)
-#define S3C2412_UMCON_AFC_8	(7<<5)
-
-#define S3C2410_UFSTAT_TXFULL	  (1<<9)
-#define S3C2410_UFSTAT_RXFULL	  (1<<8)
-#define S3C2410_UFSTAT_TXMASK	  (15<<4)
-#define S3C2410_UFSTAT_TXSHIFT	  (4)
-#define S3C2410_UFSTAT_RXMASK	  (15<<0)
-#define S3C2410_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C24A0 */
-#define S3C24A0_UFSTAT_TXFULL	  (1 << 14)
-#define S3C24A0_UFSTAT_RXFULL	  (1 << 6)
-#define S3C24A0_UFSTAT_TXMASK	  (63 << 8)
-#define S3C24A0_UFSTAT_TXSHIFT	  (8)
-#define S3C24A0_UFSTAT_RXMASK	  (63)
-#define S3C24A0_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C2443 same as S3C2440 */
-#define S3C2440_UFSTAT_TXFULL	  (1<<14)
-#define S3C2440_UFSTAT_RXFULL	  (1<<6)
-#define S3C2440_UFSTAT_TXSHIFT	  (8)
-#define S3C2440_UFSTAT_RXSHIFT	  (0)
-#define S3C2440_UFSTAT_TXMASK	  (63<<8)
-#define S3C2440_UFSTAT_RXMASK	  (63)
-
-#define S3C2410_UTRSTAT_TXE	  (1<<2)
-#define S3C2410_UTRSTAT_TXFE	  (1<<1)
-#define S3C2410_UTRSTAT_RXDR	  (1<<0)
-
-#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
-#define S3C2410_UERSTAT_FRAME	  (1<<2)
-#define S3C2410_UERSTAT_BREAK	  (1<<3)
-#define S3C2443_UERSTAT_PARITY	  (1<<1)
-
-#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
-				   S3C2410_UERSTAT_FRAME | \
-				   S3C2410_UERSTAT_BREAK)
-
-#define S3C2410_UMSTAT_CTS	  (1<<0)
-#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
-
-#define S3C2443_DIVSLOT		  (0x2C)
-
-/* S3C64XX interrupt registers. */
-#define S3C64XX_UINTP		0x30
-#define S3C64XX_UINTSP		0x34
-#define S3C64XX_UINTM		0x38
-
-#ifndef __ASSEMBLY__
-
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
-
-struct s3c24xx_uart_clksrc {
-	const char	*name;
-	unsigned int	 divisor;
-	unsigned int	 min_baud;
-	unsigned int	 max_baud;
-};
-
-/* configuration structure for per-machine configurations for the
- * serial port
- *
- * the pointer is setup by the machine specific initialisation from the
- * arch/arm/mach-s3c2410/ directory.
-*/
-
-struct s3c2410_uartcfg {
-	unsigned char	   hwport;	 /* hardware port number */
-	unsigned char	   unused;
-	unsigned short	   flags;
-	upf_t		   uart_flags;	 /* default uart flags */
-
-	unsigned long	   ucon;	 /* value of ucon for port */
-	unsigned long	   ulcon;	 /* value of ulcon for port */
-	unsigned long	   ufcon;	 /* value of ufcon for port */
-
-	struct s3c24xx_uart_clksrc *clocks;
-	unsigned int		    clocks_size;
-};
-
-/* s3c24xx_uart_devs
- *
- * this is exported from the core as we cannot use driver_register(),
- * or platform_add_device() before the console_initcall()
-*/
-
-extern struct platform_device *s3c24xx_uart_devs[4];
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
deleted file mode 100644
index 36a85f5..0000000
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device PHY registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, this is a seperate header file as some of the clock framework
- * needs to touch this if the clk_48m is used as the USB OHCI or other
- * peripheral source.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
-
-/* S3C64XX_PA_USB_HSPHY */
-
-#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
-
-#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
-#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
-#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
-
-#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
-#define S3C_PHYCLK_MODE_USB11			(1 << 6)
-#define S3C_PHYCLK_EXT_OSC			(1 << 5)
-#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
-#define S3C_PHYCLK_ID_PULL			(1 << 2)
-#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
-#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
-#define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 2)
-#define S3C_RSTCON_PHY				(1 << 0)
-
-#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
deleted file mode 100644
index 5319867..0000000
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_H
-#define __PLAT_S3C_SDHCI_H __FILE__
-
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- *            is necessary the controllers and/or GPIO blocks require the
- *	      changing of driver-strength and other controls dependant on
- *	      the card and speed of operation.
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
-	unsigned int	max_width;
-	unsigned int	host_caps;
-
-	char		**clocks;	/* set of clock sources */
-
-	void	(*cfg_gpio)(struct platform_device *dev, int width);
-	void	(*cfg_card)(struct platform_device *dev,
-			    void __iomem *regbase,
-			    struct mmc_ios *ios,
-			    struct mmc_card *card);
-};
-
-/**
- * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use withe S3C SDHCI device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
-
-/* Default platform data, exported so that per-cpu initialisation can
- * set the correct one when there are more than one cpu type selected.
-*/
-
-extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
-
-/* Helper function availablity */
-
-extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-
-/* S3C6400 SDHCI setup */
-
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
-					 void __iomem *r,
-					 struct mmc_ios *ios,
-					 struct mmc_card *card);
-
-static inline void s3c6400_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif  /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s3c6400_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s3c6400_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
-}
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
-/* S3C6410 SDHCI setup */
-
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static inline void s3c6410_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s3c6410_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s3c6410_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
-
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-extern char *s5pc100_hsmmc_clksrcs[4];
-
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
-					   void __iomem *r,
-					   struct mmc_ios *ios,
-					   struct mmc_card *card);
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static inline void s5pc100_default_sdhci0(void)
-{
-	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static inline void s5pc100_default_sdhci1(void)
-{
-	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static inline void s5pc100_default_sdhci2(void)
-{
-	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
-}
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/include/plat/udc-hs.h b/arch/arm/plat-s3c/include/plat/udc-hs.h
deleted file mode 100644
index dd04db0..0000000
--- a/arch/arm/plat-s3c/include/plat/udc-hs.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/udc-hs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C USB2.0 High-speed / OtG platform information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c_hostg_dmamode {
-	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
-	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
-	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
-};
-
-/**
- * struct s3c_hsotg_plat - platform data for high-speed otg/udc
- * @dma: Whether to use DMA or not.
- * @is_osc: The clock source is an oscillator, not a crystal
- */
-struct s3c_hsotg_plat {
-	enum s3c_hostg_dmamode	dma;
-	unsigned int		is_osc : 1;
-};
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
deleted file mode 100644
index dc66a47..0000000
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-static unsigned int fifo_mask;
-static unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-static void error(char *err);
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-
-	/* Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-s3c/include/plat/usb-control.h
deleted file mode 100644
index 822c87f..0000000
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
deleted file mode 100644
index 8eb1f43..0000000
--- a/arch/arm/plat-s3c/pm-check.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm-check.c
- *  originally in linux/arch/arm/plat-s3c24xx/pm.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-
-#include <plat/pm.h>
-
-#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
-#endif
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c_pm_run_res
- *
- * go through the given resource list, and look for system ram
-*/
-
-static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-				  (unsigned long)ptr->start,
-				  (unsigned long)ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)(res->end - res->start)+1;
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
-		  (unsigned long)res->start, (unsigned long)res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-void s3c_pm_check_prepare(void)
-{
-	crc_size = 0;
-
-	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
-
-	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
-
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-void s3c_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contains the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-/**
- * s3c_pm_runcheck() - helper to check a resource on restore.
- * @res: The resource to check
- * @vak: Pointer to list of CRC32 values to check.
- *
- * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
- * function runs the given memory resource checking it against the stored
- * CRC to ensure that memory is restored. The function tries to skip as
- * many of the areas used during the suspend process.
- */
-static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
-{
-	void *save_at = phys_to_virt(s3c_sleep_save_phys);
-	unsigned long addr;
-	unsigned long left;
-	void *stkpage;
-	void *ptr;
-	u32 calc;
-
-	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		ptr = phys_to_virt(addr);
-
-		if (in_region(ptr, left, stkpage, 4096)) {
-			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, crcs, crc_size)) {
-			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
-	}
-
-	return val;
-}
-
-/**
- * s3c_pm_check_restore() - memory check called on resume
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-void s3c_pm_check_restore(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
-}
-
-/**
- * s3c_pm_check_cleanup() - free memory resources
- *
- * Free the resources that where allocated by the suspend
- * memory check code. We do this separately from the
- * s3c_pm_check_restore() function as we cannot call any
- * functions that might sleep during that resume.
- */
-void s3c_pm_check_cleanup(void)
-{
-	kfree(crcs);
-	crcs = NULL;
-}
-
diff --git a/arch/arm/plat-s3c/pm-gpio.c b/arch/arm/plat-s3c/pm-gpio.c
deleted file mode 100644
index cfd326a..0000000
--- a/arch/arm/plat-s3c/pm-gpio.c
+++ /dev/null
@@ -1,380 +0,0 @@
-
-/* linux/arch/arm/plat-s3c/pm-gpio.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON	(0x00)
-#define OFFS_DAT	(0x04)
-#define OFFS_UP		(0x08)
-
-static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon;
-
-	/* GPACON only has one bit per control / data and no PULLUPs.
-	 * GPACON[x] = 0 => Output, 1 => SFN */
-
-	/* first set all SFN bits to SFN */
-
-	gpcon = old_gpcon | gps_gpcon;
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* now set all the other bits */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_1bit = {
-	.save	= s3c_gpio_pm_1bit_save,
-	.resume = s3c_gpio_pm_1bit_resume,
-};
-
-static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon, old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	/* restore GPIO pull-up settings */
-	__raw_writel(chip->pm_save[2], base + OFFS_UP);
-
-	/* Create a change_mask of all the items that need to have
-	 * their CON value changed before their DAT value, so that
-	 * we minimise the work between the two settings.
-	 */
-
-	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-
-	/* Write the new CON settings */
-
-	gpcon = old_gpcon & ~change_mask;
-	gpcon |= gps_gpcon & change_mask;
-
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* Now change any items that require DAT,CON */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_2bit = {
-	.save	= s3c_gpio_pm_2bit_save,
-	.resume = s3c_gpio_pm_2bit_resume,
-};
-
-#ifdef CONFIG_ARCH_S3C64XX
-static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
-{
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8)
-		chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
-	u32 old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-	return change_mask;
-}
-
-static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
-{
-	void __iomem *con = chip->base + (index * 4);
-	u32 old_gpcon = __raw_readl(con);
-	u32 gps_gpcon = chip->pm_save[index + 1];
-	u32 gpcon, mask;
-
-	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
-	gpcon = old_gpcon & ~mask;
-	gpcon |= gps_gpcon & mask;
-
-	__raw_writel(gpcon, con);
-}
-
-static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon[2];
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpdat = chip->pm_save[2];
-
-	/* First, modify the CON settings */
-
-	old_gpcon[0] = 0;
-	old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
-	s3c_gpio_pm_4bit_con(chip, 0);
-	if (chip->chip.ngpio > 8) {
-		old_gpcon[0] = __raw_readl(base - 4);
-		s3c_gpio_pm_4bit_con(chip, -1);
-	}
-
-	/* Now change the configurations that require DAT,CON */
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[1], base + OFFS_CON);
-	if (chip->chip.ngpio > 8)
-		__raw_writel(chip->pm_save[0], base - 4);
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[3], base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8) {
-		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[0], old_gpcon[1],
-			  __raw_readl(base - 4),
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-	} else
-		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[1],
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-}
-
-struct s3c_gpio_pm s3c_gpio_pm_4bit = {
-	.save	= s3c_gpio_pm_4bit_save,
-	.resume = s3c_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX */
-
-/**
- * s3c_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->save == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->save(ourchip);
-}
-
-/**
- * s3c_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void s3c_pm_save_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_save_gpio(ourchip);
-
-		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
-			  ourchip->chip.label,
-			  ourchip->pm_save[0],
-			  ourchip->pm_save[1],
-			  ourchip->pm_save[2],
-			  ourchip->pm_save[3]);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
-
-/**
- * s3c_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
-{
-	struct s3c_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->resume == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->resume(ourchip);
-}
-
-void s3c_pm_restore_gpios(void)
-{
-	struct s3c_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
-		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
-			continue;
-
-		s3c_pm_resume_gpio(ourchip);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
deleted file mode 100644
index 7674706..0000000
--- a/arch/arm/plat-s3c/pm.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C common power management (suspend to ram) support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
-#include <asm/irq.h>
-
-#include <plat/pm.h>
-#include <plat/pm-core.h>
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-/* Debug code:
- *
- * This code supports debug output to the low level UARTs for use on
- * resume before the console layer is available.
-*/
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void s3c_pm_debug_init(void)
-{
-	/* restart uart clocks so we can use them to output */
-	s3c_pm_debug_init_uart();
-}
-
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_S3C2410_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-static void s3c_pm_save_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_save_uart(uart, save);
-}
-
-static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}
-
-static void s3c_pm_restore_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_restore_uart(uart, save);
-}
-#else
-static void s3c_pm_save_uarts(void) { }
-static void s3c_pm_restore_uarts(void) { }
-#endif
-
-/* The IRQ ext-int code goes here, it is too small to currently bother
- * with its own file. */
-
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
-				    unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c_pm_enter(suspend_state_t state)
-{
-	static unsigned long regs_save[16];
-
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c_pm_debug_init();
-
-	S3C_PMDBG("%s(%d)\n", __func__, state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
-		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
-		return -EINVAL;
-	}
-
-	/* store the physical address of the register recovery block */
-
-	s3c_sleep_save_phys = virt_to_phys(regs_save);
-
-	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
-	/* save all necessary core registers not covered by the drivers */
-
-	s3c_pm_save_gpios();
-	s3c_pm_save_uarts();
-	s3c_pm_save_core();
-
-	/* set the irq configuration for wake */
-
-	s3c_pm_configure_extint();
-
-	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	s3c_pm_arch_prepare_irqs();
-
-	/* call cpu specific preparation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	s3c_pm_arch_stop_clocks();
-
-	/* s3c_cpu_save will also act as our return point from when
-	 * we resume as it saves its own register state and restores it
-	 * during the resume.  */
-
-	s3c_cpu_save(regs_save);
-
-	/* restore the cpu state using the kernel's cpu init code. */
-
-	cpu_init();
-
-	/* restore the system state */
-
-	s3c_pm_restore_core();
-	s3c_pm_restore_uarts();
-	s3c_pm_restore_gpios();
-
-	s3c_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	s3c_pm_arch_show_resume_irqs();
-
-	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
-
-	/* LEDs should now be 1110 */
-	s3c_pm_debug_smdkled(1 << 1, 0);
-
-	s3c_pm_check_restore();
-
-	/* ok, let's return from sleep */
-
-	S3C_PMDBG("S3C PM Resume (post-restore)\n");
-	return 0;
-}
-
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
-	flush_cache_all();
-}
-
-static int s3c_pm_prepare(void)
-{
-	/* prepare check area if configured */
-
-	s3c_pm_check_prepare();
-	return 0;
-}
-
-static void s3c_pm_finish(void)
-{
-	s3c_pm_check_cleanup();
-}
-
-static struct platform_suspend_ops s3c_pm_ops = {
-	.enter		= s3c_pm_enter,
-	.prepare	= s3c_pm_prepare,
-	.finish		= s3c_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-/* s3c_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c_pm_init(void)
-{
-	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
-
-	suspend_set_ops(&s3c_pm_ops);
-	return 0;
-}
diff --git a/arch/arm/plat-s3c/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c
deleted file mode 100644
index a318215..0000000
--- a/arch/arm/plat-s3c/pwm-clock.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <mach/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.get_rate	= clk_pwm_scaler_get_rate,
-		.set_rate	= clk_pwm_scaler_set_rate,
-		.round_rate	= clk_pwm_scaler_round_rate,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[0],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name		= "pwm-tdiv",
-			.parent		= &clk_timer_scaler[1],
-			.get_rate	= clk_pwm_tdiv_get_rate,
-			.set_rate	= clk_pwm_tdiv_set_rate,
-			.round_rate	= clk_pwm_tdiv_round_rate,
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = S3C_TCFG1_MUX_TCLK << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name		= "pwm-tin",
-		.id		= 0,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[1]	= {
-		.name		= "pwm-tin",
-		.id		= 1,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[2]	= {
-		.name		= "pwm-tin",
-		.id		= 2,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[3]	= {
-		.name		= "pwm-tin",
-		.id		= 3,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-	[4]	= {
-		.name		= "pwm-tin",
-		.id		= 4,
-		.set_parent	= clk_pwm_tin_set_parent,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
-		clk_timer_scaler[clk].parent = clk_timers;
-		ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
-		ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pww tclk%d\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
deleted file mode 100644
index ef019f2..0000000
--- a/arch/arm/plat-s3c/pwm.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/* arch/arm/plat-s3c/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-	/* the pwm hw only checks the compare register after a decrement,
-	   so the pin never toggles if tcmp = tcnt */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-s3c/time.c
deleted file mode 100644
index 3b27b29..0000000
--- a/arch/arm/plat-s3c/time.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- *	Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
-	unsigned long den = pclk / 1000;
-
-	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
-	unsigned long res;
-
-	res = ticks * timer_usec_ticks;
-	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
-
-	return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond  since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static unsigned long s3c2410_gettimeoffset (void)
-{
-	unsigned long tdone;
-	unsigned long tval;
-
-	/* work out how many ticks have gone since last timer interrupt */
-
-	tval =  __raw_readl(S3C2410_TCNTO(4));
-	tdone = timer_startval - tval;
-
-	/* check to see if there is an interrupt pending */
-
-	if (s3c24xx_ostimer_pending()) {
-		/* re-read the timer, and try and fix up for the missed
-		 * interrupt. Note, the interrupt may go off before the
-		 * timer has re-loaded from wrapping.
-		 */
-
-		tval =  __raw_readl(S3C2410_TCNTO(4));
-		tdone = timer_startval - tval;
-
-		if (tval != 0)
-			tdone += timer_startval;
-	}
-
-	return timer_ticks_to_usec(tdone);
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
-	.name		= "S3C2410 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
-	machine_is_bast()	|| \
-	machine_is_vr1000()	|| \
-	machine_is_anubis()	|| \
-	machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
-	unsigned long tcon;
-	unsigned long tcnt;
-	unsigned long tcfg1;
-	unsigned long tcfg0;
-
-	tcnt = TICK_MAX;  /* default value for tcnt */
-
-	/* configure the system for whichever machine is in use */
-
-	if (use_tclk1_12()) {
-		/* timer is at 12MHz, scaler is 1 */
-		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
-		tcnt = 12000000 / HZ;
-
-		tcfg1 = __raw_readl(S3C2410_TCFG1);
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
-		__raw_writel(tcfg1, S3C2410_TCFG1);
-	} else {
-		unsigned long pclk;
-		struct clk *tscaler;
-
-		/* for the h1940 (and others), we use the pclk from the core
-		 * to generate the timer values. since values around 50 to
-		 * 70MHz are not values we can directly generate the timer
-		 * value from, we need to pre-scale and divide before using it.
-		 *
-		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
-		 * (8.45 ticks per usec)
-		 */
-
-		pclk = clk_get_rate(timerclk);
-
-		/* configure clock tick */
-
-		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
-		tscaler = clk_get_parent(tdiv);
-
-		clk_set_rate(tscaler, pclk / 3);
-		clk_set_rate(tdiv, pclk / 6);
-		clk_set_parent(tin, tdiv);
-
-		tcnt = clk_get_rate(tin) / HZ;
-	}
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	/* timers reload after counting zero, so reduce the count by 1 */
-
-	tcnt--;
-
-	printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
-	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
-	/* check to see if timer is within 16bit range... */
-	if (tcnt > TICK_MAX) {
-		panic("setup_timer: HZ is too small, cannot configure timer!");
-		return;
-	}
-
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-
-	timer_startval = tcnt;
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-
-	/* ensure timer is stopped... */
-
-	tcon &= ~(7<<20);
-	tcon |= S3C2410_TCON_T4RELOAD;
-	tcon |= S3C2410_TCON_T4MANUALUPD;
-
-	__raw_writel(tcon, S3C2410_TCON);
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-	__raw_writel(tcnt, S3C2410_TCMPB(4));
-
-	/* start the timer running */
-	tcon |= S3C2410_TCON_T4START;
-	tcon &= ~S3C2410_TCON_T4MANUALUPD;
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
-	struct platform_device tmpdev;
-
-	tmpdev.dev.bus = &platform_bus_type;
-	tmpdev.id = 4;
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get clock for system timer");
-
-	clk_enable(timerclk);
-
-	if (!use_tclk1_12()) {
-		tin = clk_get(&tmpdev.dev, "pwm-tin");
-		if (IS_ERR(tin))
-			panic("failed to get pwm-tin clock for system timer");
-
-		tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
-		if (IS_ERR(tdiv))
-			panic("failed to get pwm-tdiv clock for system timer");
-	}
-
-	clk_enable(tin);
-}
-
-static void __init s3c2410_timer_init(void)
-{
-	s3c2410_timer_resources();
-	s3c2410_timer_setup();
-	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-}
-
-struct sys_timer s3c24xx_timer = {
-	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
-	.resume		= s3c2410_timer_setup
-};
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 342647e..984bf66 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,63 +9,52 @@ config PLAT_S3C24XX
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEVICE_NAND
+	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
 if PLAT_S3C24XX
 
-# code that is shared between a number of the s3c24xx implementations
+# low-level serial option nodes
 
-config S3C2410_CLOCK
+config CPU_LLSERIAL_S3C2410_ONLY
 	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
 
-config S3C24XX_DCLK
+config CPU_LLSERIAL_S3C2440_ONLY
 	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
 
-config CPU_S3C244X
+config CPU_LLSERIAL_S3C2410
 	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
-	default y
 	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
 
-config S3C2440_XTAL_12000000
+config CPU_LLSERIAL_S3C2440
 	bool
 	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
+
+# code that is shared between a number of the s3c24xx implementations
 
-config S3C2440_XTAL_16934400
+config S3C2410_CLOCK
 	bool
 	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
+	  Clock code for the S3C2410, and similar processors which
+	  is currently includes the S3C2410, S3C2440, S3C2442.
 
-config S3C2440_PLL_12000000
+config S3C2443_CLOCK
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
 	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+	  Clock code for the S3C2443 and similar processors, which includes
+	  the S3C2416 and S3C2450.
 
-config S3C2440_PLL_16934400
+config S3C24XX_DCLK
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
 	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
 
 config S3C24XX_PWM
 	bool "PWM device support"
@@ -74,7 +63,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system.
 
-
 # gpio configurations
 
 config S3C24XX_GPIO_EXTRA
@@ -117,13 +105,6 @@ config S3C2410_DMA_DEBUG
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
 
-config S3C24XX_ADC
-	bool "ADC common driver support"
-	help
-	  Core support for the ADC block found in the S3C24XX SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
 # SPI default pin configuration code
 
 config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
@@ -183,4 +164,9 @@ config S3C24XX_SIMTEC_AUDIO
 	help
 	  Add audio devices for common Simtec S3C24XX boards
 
+config S3C2410_SETUP_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung TouchScreen.
+
 endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 5dee8c1..c2064c3 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,26 +25,20 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
+obj-$(CONFIG_S3C2443_CLOCK)	+= s3c2443-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
+obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o
 
 # SPI gpio central GPIO functions
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
deleted file mode 100644
index ce47627..0000000
--- a/arch/arm/plat-s3c24xx/adc.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/* arch/arm/plat-s3c24xx/adc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX ADC device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <plat/regs-adc.h>
-#include <plat/adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-struct s3c_adc_client {
-	struct platform_device	*pdev;
-	struct list_head	 pend;
-	wait_queue_head_t	*wait;
-
-	unsigned int		 nr_samples;
-	int			 result;
-	unsigned char		 is_ts;
-	unsigned char		 channel;
-
-	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
-	void	(*convert_cb)(struct s3c_adc_client *c,
-			      unsigned val1, unsigned val2,
-			      unsigned *samples_left);
-};
-
-struct adc_device {
-	struct platform_device	*pdev;
-	struct platform_device	*owner;
-	struct clk		*clk;
-	struct s3c_adc_client	*cur;
-	struct s3c_adc_client	*ts_pend;
-	void __iomem		*regs;
-
-	unsigned int		 prescale;
-
-	int			 irq;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending);
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	con |= S3C2410_ADCCON_ENABLE_START;
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
-				  struct s3c_adc_client *client)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	client->select_cb(client, 1);
-
-	con &= ~S3C2410_ADCCON_MUXMASK;
-	con &= ~S3C2410_ADCCON_STDBM;
-	con &= ~S3C2410_ADCCON_STARTMASK;
-
-	if (!client->is_ts)
-		con |= S3C2410_ADCCON_SELMUX(client->channel);
-
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
-	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
-		readl(adc->regs + S3C2410_ADCCON),
-		readl(adc->regs + S3C2410_ADCTSC),
-		readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
-	struct s3c_adc_client *next = adc->ts_pend;
-
-	if (!next && !list_empty(&adc_pending)) {
-		next = list_first_entry(&adc_pending,
-					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
-
-	if (next) {
-		adc_dbg(adc, "new client is %p\n", next);
-		adc->cur = next;
-		s3c_adc_select(adc, next);
-		s3c_adc_convert(adc);
-		s3c_adc_dbgshow(adc);
-	}
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
-		  unsigned int channel, unsigned int nr_samples)
-{
-	struct adc_device *adc = adc_dev;
-	unsigned long flags;
-
-	if (!adc) {
-		printk(KERN_ERR "%s: failed to find adc\n", __func__);
-		return -EINVAL;
-	}
-
-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
-	local_irq_save(flags);
-
-	client->channel = channel;
-	client->nr_samples = nr_samples;
-
-	if (client->is_ts)
-		adc->ts_pend = client;
-	else
-		list_add_tail(&client->pend, &adc_pending);
-
-	if (!adc->cur)
-		s3c_adc_try(adc);
-	local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
-			     unsigned v, unsigned u, unsigned *left)
-{
-	client->result = v;
-	wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
-	int ret;
-
-	client->convert_cb = s3c_convert_done;
-	client->wait = &wake;
-	client->result = -1;
-
-	ret = s3c_adc_start(client, ch, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
-	if (client->result < 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	client->convert_cb = NULL;
-	return client->result;
-
-err:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
-				   unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(struct s3c_adc_client *client,
-						       unsigned int selected),
-					void (*conv)(struct s3c_adc_client *client,
-						     unsigned d0, unsigned d1,
-						     unsigned *samples_left),
-					unsigned int is_ts)
-{
-	struct s3c_adc_client *client;
-
-	WARN_ON(!pdev);
-
-	if (!select)
-		select = s3c_adc_default_select;
-
-	if (!pdev)
-		return ERR_PTR(-EINVAL);
-
-	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
-	if (!client) {
-		dev_err(&pdev->dev, "no memory for adc client\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	client->pdev = pdev;
-	client->is_ts = is_ts;
-	client->select_cb = select;
-	client->convert_cb = conv;
-
-	return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
-	/* We should really check that nothing is in progress. */
-	if (adc_dev->cur == client)
-		adc_dev->cur = NULL;
-	if (adc_dev->ts_pend == client)
-		adc_dev->ts_pend = NULL;
-	else {
-		struct list_head *p, *n;
-		struct s3c_adc_client *tmp;
-
-		list_for_each_safe(p, n, &adc_pending) {
-			tmp = list_entry(p, struct s3c_adc_client, pend);
-			if (tmp == client)
-				list_del(&tmp->pend);
-		}
-	}
-
-	if (adc_dev->cur == NULL)
-		s3c_adc_try(adc_dev);
-	kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
-	struct adc_device *adc = pw;
-	struct s3c_adc_client *client = adc->cur;
-	unsigned long flags;
-	unsigned data0, data1;
-
-	if (!client) {
-		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		return IRQ_HANDLED;
-	}
-
-	data0 = readl(adc->regs + S3C2410_ADCDAT0);
-	data1 = readl(adc->regs + S3C2410_ADCDAT1);
-	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
-	client->nr_samples--;
-
-	if (client->convert_cb)
-		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
-				     &client->nr_samples);
-
-	if (client->nr_samples > 0) {
-		/* fire another conversion for this */
-
-		client->select_cb(client, 1);
-		s3c_adc_convert(adc);
-	} else {
-		local_irq_save(flags);
-		(client->select_cb)(client, 0);
-		adc->cur = NULL;
-
-		s3c_adc_try(adc);
-		local_irq_restore(flags);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adc_device *adc;
-	struct resource *regs;
-	int ret;
-
-	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
-	if (adc == NULL) {
-		dev_err(dev, "failed to allocate adc_device\n");
-		return -ENOMEM;
-	}
-
-	adc->pdev = pdev;
-	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
-	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0) {
-		dev_err(dev, "failed to get adc irq\n");
-		ret = -ENOENT;
-		goto err_alloc;
-	}
-
-	ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
-	if (ret < 0) {
-		dev_err(dev, "failed to attach adc irq\n");
-		goto err_alloc;
-	}
-
-	adc->clk = clk_get(dev, "adc");
-	if (IS_ERR(adc->clk)) {
-		dev_err(dev, "failed to get adc clock\n");
-		ret = PTR_ERR(adc->clk);
-		goto err_irq;
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(dev, "failed to find registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	adc->regs = ioremap(regs->start, resource_size(regs));
-	if (!adc->regs) {
-		dev_err(dev, "failed to map registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	clk_enable(adc->clk);
-
-	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
-	       adc->regs + S3C2410_ADCCON);
-
-	dev_info(dev, "attached adc driver\n");
-
-	platform_set_drvdata(pdev, adc);
-	adc_dev = adc;
-
-	return 0;
-
- err_clk:
-	clk_put(adc->clk);
-
- err_irq:
-	free_irq(adc->irq, adc);
-
- err_alloc:
-	kfree(adc);
-	return ret;
-}
-
-static int __devexit s3c_adc_remove(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	iounmap(adc->regs);
-	free_irq(adc->irq, adc);
-	clk_disable(adc->clk);
-	clk_put(adc->clk);
-	kfree(adc);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	u32 con;
-
-	con = readl(adc->regs + S3C2410_ADCCON);
-	con |= S3C2410_ADCCON_STDBM;
-	writel(con, adc->regs + S3C2410_ADCCON);
-
-	clk_disable(adc->clk);
-
-	return 0;
-}
-
-static int s3c_adc_resume(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	clk_enable(adc->clk);
-
-	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
-	       adc->regs + S3C2410_ADCCON);
-
-	return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static struct platform_driver s3c_adc_driver = {
-	.driver		= {
-		.name	= "s3c24xx-adc",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_adc_probe,
-	.remove		= __devexit_p(s3c_adc_remove),
-	.suspend	= s3c_adc_suspend,
-	.resume		= s3c_adc_resume,
-};
-
-static int __init adc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&s3c_adc_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(adc_init);
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index ac061a1..cf97caa 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -161,14 +161,18 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 /* external clock definitions */
 
+static struct clk_ops dclk_ops = {
+	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
+};
+
 struct clk s3c24xx_dclk0 = {
 	.name		= "dclk0",
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
 	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
 };
 
 struct clk s3c24xx_dclk1 = {
@@ -176,19 +180,21 @@ struct clk s3c24xx_dclk1 = {
 	.id		= -1,
 	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
 	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
+	.ops		= &dclk_ops,
+};
+
+static struct clk_ops clkout_ops = {
+	.set_parent	= s3c24xx_clkout_setparent,
 };
 
 struct clk s3c24xx_clkout0 = {
 	.name		= "clkout0",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
 
 struct clk s3c24xx_clkout1 = {
 	.name		= "clkout1",
 	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+	.ops		= &clkout_ops,
 };
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 9e0e20a..7b44d0c 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -42,6 +42,7 @@
 #include <plat/nand.h>
 
 #include <plat/common-smdk.h>
+#include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 
@@ -185,10 +186,10 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
 	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 2d42efb..1ecc15b 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/slab.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..76d0858 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,9 +49,8 @@
 #include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
-#include "s3c244x.h"
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
+#include <plat/s3c2416.h>
+#include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
 
 /* table of supported CPUs */
@@ -59,6 +58,7 @@
 static const char name_s3c2400[]  = "S3C2400";
 static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2416[]  = "S3C2416/S3C2450";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
 static const char name_s3c2442b[]  = "S3C2442B";
@@ -139,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
 	},
+	{			/* a strange version of the s3c2416 */
+		.idcode		= 0x32450003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2416_map_io,
+		.init_clocks	= s3c2416_init_clocks,
+		.init_uarts	= s3c2416_init_uarts,
+		.init		= s3c2416_init,
+		.name		= name_s3c2416,
+	},
 	{
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
@@ -172,6 +181,16 @@ static struct map_desc s3c_iodesc[] __initdata = {
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
+#if defined(CONFIG_CPU_S3C2416)
+	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+	/* test for s3c2416 or similar device */
+	if ((gs >> 16) == 0x3245)
+		return gs;
+#endif
+
 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	return __raw_readl(S3C2412_GSTATUS1);
 #else
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 7f686a3..452e184 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -20,6 +20,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/string.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,12 +34,12 @@
 
 #include <plat/regs-serial.h>
 #include <plat/udc.h>
+#include <plat/mci.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-spi.h>
-
-#include <mach/ts.h>
+#include <plat/ts.h>
 
 /* Serial port registrations */
 
@@ -112,34 +114,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* yart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
 /* LCD Controller */
 
 static struct resource s3c_lcd_resource[] = {
@@ -175,19 +149,41 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 {
 	struct s3c2410fb_mach_info *npd;
 
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
 	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
 		s3c_device_lcd.dev.platform_data = npd;
+		npd->displays = kmemdup(pd->displays,
+			sizeof(struct s3c2410fb_display) * npd->num_displays,
+			GFP_KERNEL);
+		if (!npd->displays)
+			printk(KERN_ERR "no memory for LCD display data\n");
 	} else {
 		printk(KERN_ERR "no memory for LCD platform data\n");
 	}
 }
 
 /* Touchscreen */
+
+static struct resource s3c_ts_resource[] = {
+	[0] = {
+		.start = S3C24XX_PA_ADC,
+		.end   = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+
+};
+
 struct platform_device s3c_device_ts = {
 	.name		  = "s3c2410-ts",
 	.id		  = -1,
+	.dev.parent	= &s3c_device_adc.dev,
+	.num_resources	  = ARRAY_SIZE(s3c_ts_resource),
+	.resource	  = s3c_ts_resource,
 };
 EXPORT_SYMBOL(s3c_device_ts);
 
@@ -238,32 +234,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
 	}
 }
 
-
-/* Watchdog */
-
-static struct resource s3c_wdt_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_WATCHDOG,
-		.end   = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		  = "s3c2410-wdt",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_wdt_resource),
-	.resource	  = s3c_wdt_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_wdt);
-
 /* IIS */
 
 static struct resource s3c_iis_resource[] = {
@@ -346,14 +316,6 @@ struct platform_device s3c_device_adc = {
 	.resource	  = s3c_adc_resource,
 };
 
-/* HWMON */
-
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
 /* SDI */
 
 static struct resource s3c_sdi_resource[] = {
@@ -379,6 +341,18 @@ struct platform_device s3c_device_sdi = {
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+{
+	struct s3c24xx_mci_pdata *npd;
+
+	npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory to copy pdata", __func__);
+
+	s3c_device_sdi.dev.platform_data = npd;
+}
+
+
 /* SPI (0) */
 
 static struct resource s3c_spi0_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f0ea794..6ad274e 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -33,7 +33,7 @@
 #include <mach/dma.h>
 #include <mach/map.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/regs-dma.h>
 
 /* io map for dma */
@@ -1104,7 +1104,7 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  * devaddr:   physical address of the source
 */
 
-int s3c2410_dma_devconfig(int channel,
+int s3c2410_dma_devconfig(unsigned int channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 5467470..2f3d7c0 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX GPIO support
@@ -20,12 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -34,133 +34,46 @@
 
 #include <mach/regs-gpio.h>
 
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
-	unsigned long con;
-	unsigned long flags;
+#include <plat/gpio-core.h>
 
-	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
-	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
-	}
-
-	switch (function) {
-	case S3C2410_GPIO_LEAVE:
-		mask = 0;
-		function = 0;
-		break;
-
-	case S3C2410_GPIO_INPUT:
-	case S3C2410_GPIO_OUTPUT:
-	case S3C2410_GPIO_SFN2:
-	case S3C2410_GPIO_SFN3:
-		if (pin < S3C2410_GPIO_BANKB) {
-			function -= 1;
-			function &= 1;
-			function <<= S3C2410_GPIO_OFFSET(pin);
-		} else {
-			function &= 3;
-			function <<= S3C2410_GPIO_OFFSET(pin)*2;
-		}
-	}
-
-	/* modify the specified register wwith IRQs off */
-
-	local_irq_save(flags);
-
-	con  = __raw_readl(base + 0x00);
-	con &= ~mask;
-	con |= function;
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long val = __raw_readl(base);
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		val >>= S3C2410_GPIO_OFFSET(pin);
-		val &= 1;
-		val += 1;
-	} else {
-		val >>= S3C2410_GPIO_OFFSET(pin)*2;
-		val &= 3;
-	}
-
-	return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+/* gpiolib wrappers until these are totally eliminated */
 
 void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long up;
+	int ret;
 
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
+	WARN_ON(to);	/* should be none of these left */
 
-	local_irq_save(flags);
-
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
 
-	local_irq_restore(flags);
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
 }
-
 EXPORT_SYMBOL(s3c2410_gpio_pullup);
 
-int s3c2410_gpio_getpull(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return -EINVAL;
-
-	return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpull);
-
 void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
+	/* do this via gpiolib until all users removed */
 
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_setpin);
 
 unsigned int s3c2410_gpio_getpin(unsigned int pin)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
 
-	return __raw_readl(base + 0x04) & (1<< offs);
+	return __raw_readl(chip->base + 0x04) & (1<< offs);
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getpin);
@@ -181,22 +94,3 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
 }
 
 EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
-		return -EINVAL;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
-		return -EINVAL;	/* not valid pin */
-
-	if (pin < S3C2410_GPF(4))
-		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG(0))
-		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961..4c0896f 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/gpiolib.c
  *
- * Copyright (c) 2008 Simtec Electronics
+ * Copyright (c) 2008-2010 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -20,7 +20,9 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/gpio-core.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <plat/pm.h>
@@ -77,10 +79,21 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 	return IRQ_EINT8 + offset;
 }
 
+static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
+	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
+};
+
+struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
+};
+
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
 		.base	= S3C2410_GPACON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
+		.config	= &s3c24xx_gpiocfg_banka,
 		.chip	= {
 			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
@@ -161,15 +174,58 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 			.ngpio			= 11,
 		},
 	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPJ(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOJ",
+			.ngpio			= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPK(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOK",
+			.ngpio			= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPL(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOL",
+			.ngpio			= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPM(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOM",
+			.ngpio			= 2,
+		},
+	},
 };
 
+
 static __init int s3c24xx_gpiolib_init(void)
 {
 	struct s3c_gpio_chip *chip = s3c24xx_gpios;
 	int gpn;
 
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++)
+	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+
 		s3c_gpiolib_add(chip);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
new file mode 100644
index 0000000..de5e88f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d..d623235 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@ struct s3c_cpufreq_config {
  * @locktime_m: The lock-time in uS for the MPLL.
  * @locktime_u: The lock-time in uS for the UPLL.
  * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
deleted file mode 100644
index 9565ead..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/dma-core.h>
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum s3c2410_dmasrc dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 36aaa10..2ac2b21 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -40,4 +40,13 @@ struct s3c24xx_mci_pdata {
 				     unsigned short vdd);
 };
 
+/**
+ * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
+ * @pdata: The platform data
+ *
+ * Copy the platform data supplied by @pdata so that this can be marked
+ * __initdata.
+ */
+extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
+
 #endif /* _ARCH_NCI_H */
diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h
index 7ea8bff..005729a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pll.h
+++ b/arch/arm/plat-s3c24xx/include/plat/pll.h
@@ -35,3 +35,28 @@ s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
 
 	return (unsigned int)fvco;
 }
+
+#define S3C2416_PLL_M_SHIFT	(14)
+#define S3C2416_PLL_P_SHIFT	(5)
+#define S3C2416_PLL_S_MASK	(7)
+#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
+#define S3C2416_PLL_P_MASK	(63)
+
+static inline unsigned int
+s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int m, p, s;
+	uint64_t fvco;
+
+	m = pllval >> S3C2416_PLL_M_SHIFT;
+	p = pllval >> S3C2416_PLL_P_SHIFT;
+
+	s = pllval & S3C2416_PLL_S_MASK;
+	m &= S3C2416_PLL_M_MASK;
+	p &= S3C2416_PLL_P_MASK;
+
+	fvco = (uint64_t)baseclk * m;
+	do_div(fvco, (p << s));
+
+	return (unsigned int)fvco;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/plat-s3c24xx/include/plat/pm-core.h
deleted file mode 100644
index fb45dd9..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-}
-
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
-				    unsigned long mask);
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-		  __raw_readl(S3C2410_SRCPND),
-		  __raw_readl(S3C2410_EINTPEND));
-
-	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				s3c_irqwake_intmask);
-
-	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				s3c_irqwake_eintmask);
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-}
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
new file mode 100644
index 0000000..dc3c090
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern  int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
index 815b107..a19715f 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
@@ -30,3 +30,22 @@ extern  int s3c2443_baseclk_add(void);
 #define s3c2443_map_io NULL
 #define s3c2443_init NULL
 #endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk;	/* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
new file mode 100644
index 0000000..307248d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2440 and S3C2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+extern void s3c244x_map_io(void);
+
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c244x_init_clocks(int xtal);
+
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#define s3c244x_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 3620dd2..60627e6 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -43,6 +43,7 @@
 
 #include <asm/mach/time.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 
 #define PFX "s3c24xx-pm: "
@@ -90,22 +91,22 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
 {
 	unsigned long irqstate;
 	unsigned long pinstate;
-	int irq = s3c2410_gpio_getirq(pin);
+	int irq = gpio_to_irq(pin);
 
 	if (irqoffs < 4)
 		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
 	else
 		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
 
-	pinstate = s3c2410_gpio_getcfg(pin);
+	pinstate = s3c_gpio_getcfg(pin);
 
 	if (!irqstate) {
 		if (pinstate == S3C2410_GPIO_IRQ)
-			S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
 	} else {
 		if (pinstate == S3C2410_GPIO_IRQ) {
 			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
 		}
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
index b61bdb7..9ecc5d9 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable)
 
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "nand",
 		.id		= -1,
@@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void)
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	/* show the clock-slow value */
 
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 963fb0b..b1908e5 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -17,6 +17,7 @@
 #include <linux/cpufreq.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/map.h>
 #include <mach/regs-mem.h>
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index 24993dc..0b46d38 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <linux/amba/pl093.h>
 
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
deleted file mode 100644
index 49f6503..0000000
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
-	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
-	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
-	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
-	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
-	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
-	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
-	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
-	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
-	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
-	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
-	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
-	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
-	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
-	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
-	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
-	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
-	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
-	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
-	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
-	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
-	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
-	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
-	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
-	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
-	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
-	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
-	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
-};
-
-static int s3c2440_plls12_add(struct sys_device *dev)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 12000000) {
-		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_12,
-					   ARRAY_SIZE(s3c2440_plls_12));
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_plls12_drv = {
-	.add	= s3c2440_plls12_add,
-};
-
-static int __init s3c2440_pll_12mhz(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
-
-}
-
-arch_initcall(s3c2440_pll_12mhz);
-
-static struct sysdev_driver s3c2442_plls12_drv = {
-	.add	= s3c2440_plls12_add,
-};
-
-static int __init s3c2442_pll_12mhz(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
-
-}
-
-arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
deleted file mode 100644
index 7679af1..0000000
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
-	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
-	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
-	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
-	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
-	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
-	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
-	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
-	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
-	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
-	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
-	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
-	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
-	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
-	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
-	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
-	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
-	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
-};
-
-static int s3c2440_plls169344_add(struct sys_device *dev)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 169344000) {
-		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_169344,
-					   ARRAY_SIZE(s3c2440_plls_169344));
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_plls169344_drv = {
-	.add	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2440_pll_16934400(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass,
-				      &s3c2440_plls169344_drv);
-
-}
-
-arch_initcall(s3c2440_pll_16934400);
-
-static struct sysdev_driver s3c2442_plls169344_drv = {
-	.add	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2442_pll_16934400(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass,
-				      &s3c2442_plls169344_drv);
-
-}
-
-arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
new file mode 100644
index 0000000..461f070
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -0,0 +1,472 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
+ *
+ * Copyright (c) 2007, 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control suport - common code
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+
+
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	u32 ctrlbit = clk->ctrlbit;
+	u32 con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
+}
+
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
+struct clk clk_mpllref = {
+	.name		= "mpllref",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+static struct clk *clk_epllref_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpllref,
+	[2] = &clk_xtal,
+	[3] = &clk_ext,
+};
+
+struct clksrc_clk clk_epllref = {
+	.clk	= {
+		.name		= "epllref",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_epllref_sources,
+		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
+};
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static struct clk *clk_sysclk_sources[] = {
+	[0] = &clk_epllref.clk,
+	[1] = &clk_epll,
+};
+
+struct clksrc_clk clk_esysclk = {
+	.clk	= {
+		.name		= "esysclk",
+		.parent		= &clk_epll,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_sysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
+	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+
+	return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_getrate_mdivclk,
+	},
+};
+
+static struct clk *clk_msysclk_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpll,
+	[2] = &clk_mdivclk,
+	[3] = &clk_mpllref,
+};
+
+struct clksrc_clk clk_msysclk = {
+	.clk	= {
+		.name		= "msysclk",
+		.parent		= &clk_xtal,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_msysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
+};
+
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+	.name		= "prediv",
+	.id		= -1,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_prediv_getrate,
+	},
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static struct clksrc_clk clk_usb_bus_host = {
+	.clk	= {
+		.name		= "usb-bus-host-parent",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
+};
+
+/* common clksrc clocks */
+
+static struct clksrc_clk clksrc_clks[] = {
+	{
+		/* ART baud-rate clock sourced from esysclk via a divisor */
+		.clk	= {
+			.name		= "uartclk",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+	}, {
+		/* camera interface bus-clock, divided down from esysclk */
+		.clk	= {
+			.name		= "camif-upll",	/* same as 2440 name */
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
+	}, {
+		.clk	= {
+			.name		= "display-if",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
+	},
+};
+
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIC,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA3,
+	}, {
+		.name		= "dma",
+		.id		= 4,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA4,
+	}, {
+		.name		= "dma",
+		.id		= 5,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA5,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBD,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_LCDC,
+
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_PWMT,
+	}, {
+		.name		= "cfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_CFC,
+	}, {
+		.name		= "ssmc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_SSMC,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_AC97,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus_host.clk,
+	}
+};
+
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
+
+	return clkcon0 + 1;
+}
+
+/* EPLLCON compatible enough to get on/off information */
+
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
+						   fdiv_fn get_fdiv)
+{
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long pll;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+	int ptr;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	pll = get_mpll(mpllcon, xtal);
+	clk_msysclk.clk.rate = pll;
+
+	fclk = pll / get_fdiv(clkdiv0);
+	hclk = s3c2443_prediv_getrate(&clk_prediv);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
+	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+
+	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(pll), print_mhz(fclk),
+	       print_mhz(hclk), print_mhz(pclk));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+		s3c_set_clksrc(&clksrc_clks[ptr], true);
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
+	}
+
+	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_epll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_prediv,
+	&clk_mpllref,
+	&clk_mdivclk,
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus,
+};
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_usb_bus_host,
+	&clk_epllref,
+	&clk_esysclk,
+	&clk_msysclk,
+};
+
+void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       fdiv_fn get_fdiv)
+{
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	clk_usb_bus.parent = &clk_usb_bus_host.clk;
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	/* See s3c2443/etc notes on disabling clocks at init time */
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
deleted file mode 100644
index 7937109..0000000
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.set_parent	= s3c2440_setparent_armclk,
-};
-
-static int s3c244x_clk_add(struct sys_device *sysdev)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add		= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct sysdev_driver s3c2442_clk_driver = {
-	.add		= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
deleted file mode 100644
index 12623a4..0000000
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_device_nand.name = "s3c2440-nand";
-	s3c_device_ts.name = "s3c2440-ts";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static int s3c244x_resume(struct sys_device *dev)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
-
-/* Since the S3C2442 and S3C2440 share  items, put both sysclasses here */
-
-struct sysdev_class s3c2440_sysclass = {
-	.name		= "s3c2440-core",
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
-};
-
-struct sysdev_class s3c2442_sysclass = {
-	.name		= "s3c2442-core",
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume
-};
-
-/* need to register class before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return sysdev_class_register(&s3c2440_sysclass);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return sysdev_class_register(&s3c2442_sysclass);
-}
-
-core_initcall(s3c2442_core_init);
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
deleted file mode 100644
index 6aab5ea..0000000
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
index 71a6acc..9e90a7c 100644
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ b/arch/arm/plat-s3c24xx/setup-i2c.c
@@ -15,12 +15,13 @@
 
 struct platform_device;
 
+#include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
+	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/plat-s3c24xx/setup-ts.c
new file mode 100644
index 0000000..ed26386
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/setup-ts.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s3c24xx/setup-ts.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *                     http://www.samsung.com/
+ *
+ * Based on S3C24XX setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+/**
+ * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+ */
+void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index da7a617..9793544 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
 		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
 		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
-		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
-		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
+		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index 89fcf53..db9e9e4 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -23,16 +23,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
 
 	printk(KERN_INFO "%s(%d)\n", __func__, enable);
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
 		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
 		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
-		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
-		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 86b9edc..8ea663a 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
 		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
 		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
-		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
-		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
+		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index e6da87a..0000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#	Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select CPU_V6
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
-	bool
-	help
-	  Common initialisation code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
-	bool
-	help
-	  Common clock support code for the S3C6400 that is shared
-	  by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
deleted file mode 100644
index b85b435..0000000
--- a/arch/arm/plat-s3c64xx/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-# arch/arm/plat-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 7a36e89..0000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.id		= -1,
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "dma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
deleted file mode 100644
index 49796d2..0000000
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
-		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
-		.init_uarts	= s3c6400_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
-		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
-		.init_uarts	= s3c6410_init_uarts,
-		.init		= s3c6410_init,
-		.name		= name_s3c6410,
-	},
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC0,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_VIC1,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
-		.length		= SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
-	.name	= "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
-	.cls	= &s3c64xx_sysclass,
-};
-
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-	iotable_init(mach_desc, size);
-
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
-
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
-	sysdev_class_register(&s3c64xx_sysclass);
-	return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
deleted file mode 100644
index a21a88f..0000000
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/gpio.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-cfg.h>
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
-		break;
-	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c
deleted file mode 100644
index 62c11a6..0000000
--- a/arch/arm/plat-s3c64xx/dev-uart.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-uart.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s3c64xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c64xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c6xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c64xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c64xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c64xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c6xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c64xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
-	},
-};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
deleted file mode 100644
index d554b93..0000000
--- a/arch/arm/plat-s3c64xx/dma.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
-
-#include <asm/hardware/pl080.h>
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
-	struct sys_device	 sysdev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	struct s3c2410_dma_chan *channels;
-	enum dma_ch		 chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
-	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
-		 chan->number,
-		 readl(chan->regs + PL080_CH_SRC_ADDR),
-		 readl(chan->regs + PL080_CH_DST_ADDR),
-		 readl(chan->regs + PL080_CH_LLI),
-		 readl(chan->regs + PL080_CH_CONTROL),
-		 readl(chan->regs + PL080S_CH_CONTROL2),
-		 readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
-	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
-		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
-		 lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *ptr;
-	struct s3c64xx_dma_buff *end;
-
-	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
-		 chan->number, chan->next, chan->curr, chan->end);
-
-	ptr = chan->next;
-	end = chan->end;
-
-	if (debug_show_buffs) {
-		for (; ptr != NULL; ptr = ptr->next) {
-			pr_debug("DMA%d: %08x ",
-				 chan->number, ptr->lli_dma);
-			show_lli(ptr->lli);
-		}
-	}
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned int start, offs;
-
-	start = 0;
-
-	if (channel >= DMACH_PCM1_TX)
-		start = 8;
-
-	for (offs = 0; offs < 8; offs++) {
-		chan = &s3c2410_chans[start + offs];
-		if (!chan->in_use)
-			goto found;
-	}
-
-	return NULL;
-
-found:
-	s3c_dma_chan_map[channel] = chan;
-	return chan;
-}
-
-int s3c2410_dma_config(unsigned int channel, int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (xferunit) {
-	case 1:
-		chan->hw_width = 0;
-		break;
-	case 2:
-		chan->hw_width = 1;
-		break;
-	case 4:
-		chan->hw_width = 2;
-		break;
-	default:
-		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
-				 struct pl080s_lli *lli,
-				 dma_addr_t data, int size)
-{
-	dma_addr_t src, dst;
-	u32 control0, control1;
-
-	switch (chan->source) {
-	case S3C2410_DMASRC_HW:
-		src = chan->dev_addr;
-		dst = data;
-		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= PL080_CONTROL_DST_INCR;
-		break;
-
-	case S3C2410_DMASRC_MEM:
-		src = data;
-		dst = chan->dev_addr;
-		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= PL080_CONTROL_SRC_INCR;
-		break;
-	default:
-		BUG();
-	}
-
-	/* note, we do not currently setup any of the burst controls */
-
-	control1 = size >> chan->hw_width;	/* size in no of xfers */
-	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
-	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-	lli->next_lli = 0;
-	lli->control0 = control0;
-	lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
-				struct pl080s_lli *lli)
-{
-	void __iomem *regs = chan->regs;
-
-	pr_debug("%s: LLI %p => regs\n", __func__, lli);
-	show_lli(lli);
-
-	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
-	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
-	writel(lli->next_lli, regs + PL080_CH_LLI);
-	writel(lli->control0, regs + PL080_CH_CONTROL);
-	writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dmac *dmac = chan->dmac;
-	u32 config;
-	u32 bit = chan->bit;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: clearing interrupts\n", __func__);
-
-	/* clear interrupts */
-	writel(bit, dmac->regs + PL080_TC_CLEAR);
-	writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-	pr_debug("%s: starting channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_ENABLE;
-
-	pr_debug("%s: writing config %08x\n", __func__, config);
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
-	u32 config;
-	int timeout;
-
-	pr_debug("%s: stopping channel\n", __func__);
-
-	dbg_showchan(chan);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_HALT;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	timeout = 1000;
-	do {
-		config = readl(chan->regs + PL080S_CH_CONFIG);
-		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
-		if (config & PL080_CONFIG_ACTIVE)
-			udelay(10);
-		else
-			break;
-		} while (--timeout > 0);
-
-	if (config & PL080_CONFIG_ACTIVE) {
-		printk(KERN_ERR "%s: channel still active\n", __func__);
-		return -EFAULT;
-	}
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
-					 struct s3c64xx_dma_buff *buf,
-					 enum s3c2410_dma_buffresult result)
-{
-	if (chan->callback_fn != NULL)
-		(chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
-	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
-	kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *buff, *next;
-	u32 config;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: flushing channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	/* dump all the buffers associated with this channel */
-
-	for (buff = chan->curr; buff != NULL; buff = next) {
-		next = buff->next;
-		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
-		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
-		s3c64xx_dma_freebuff(buff);
-	}
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	return 0;
-}
-
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c64xx_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c64xx_dma_stop(chan);
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c64xx_dma_flush(chan);
-
-	/* belive PAUSE/RESUME are no-ops */
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_STARTED:
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-	}
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c64xx_dma_buff *next;
-	struct s3c64xx_dma_buff *buff;
-	struct pl080s_lli *lli;
-	unsigned long flags;
-	int ret;
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
-	if (!buff) {
-		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
-		return -ENOMEM;
-	}
-
-	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
-	if (!lli) {
-		printk(KERN_ERR "%s: no memory for lli\n", __func__);
-		ret = -ENOMEM;
-		goto err_buff;
-	}
-
-	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
-		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
-	buff->lli = lli;
-	buff->pw = id;
-
-	s3c64xx_dma_fill_lli(chan, lli, data, size);
-
-	local_irq_save(flags);
-
-	if ((next = chan->next) != NULL) {
-		struct s3c64xx_dma_buff *end = chan->end;
-		struct pl080s_lli *endlli = end->lli;
-
-		pr_debug("enquing onto channel\n");
-
-		end->next = buff;
-		endlli->next_lli = buff->lli_dma;
-
-		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
-			struct s3c64xx_dma_buff *curr = chan->curr;
-			lli->next_lli = curr->lli_dma;
-		}
-
-		if (next == chan->curr) {
-			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
-			chan->next = buff;
-		}
-
-		show_lli(endlli);
-		chan->end = buff;
-	} else {
-		pr_debug("enquing onto empty channel\n");
-
-		chan->curr = buff;
-		chan->next = buff;
-		chan->end = buff;
-
-		s3c64xx_lli_to_regs(chan, lli);
-	}
-
-	local_irq_restore(flags);
-
-	show_lli(lli);
-
-	dbg_showchan(chan);
-	dbg_showbuffs(chan);
-	return 0;
-
-err_buff:
-	kfree(buff);
-	return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(int channel,
-			  enum s3c2410_dmasrc source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	u32 peripheral;
-	u32 config = 0;
-
-	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
-		 __func__, channel, source, devaddr, chan);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	peripheral = (chan->peripheral & 0xf);
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
-	switch (source) {
-	case S3C2410_DMASRC_HW:
-		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
-		break;
-	case S3C2410_DMASRC_MEM:
-		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
-		break;
-	default:
-		printk(KERN_ERR "%s: bad source\n", __func__);
-		return -EINVAL;
-	}
-
-	/* allow TC and ERR interrupts */
-	config |= PL080_CONFIG_TC_IRQ_MASK;
-	config |= PL080_CONFIG_ERR_IRQ_MASK;
-
-	pr_debug("%s: config %08x\n", __func__, config);
-
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(unsigned int channel,
-			    dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	if (src != NULL)
-		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
-	if (dst != NULL)
-		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c64xx_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-	chan->peripheral = channel;
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
-	struct s3c64xx_dmac *dmac = pw;
-	struct s3c2410_dma_chan *chan;
-	enum s3c2410_dma_buffresult res;
-	u32 tcstat, errstat;
-	u32 bit;
-	int offs;
-
-	tcstat = readl(dmac->regs + PL080_TC_STATUS);
-	errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
-	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
-		struct s3c64xx_dma_buff *buff;
-
-		if (!(errstat & bit) && !(tcstat & bit))
-			continue;
-
-		chan = dmac->channels + offs;
-		res = S3C2410_RES_ERR;
-
-		if (tcstat & bit) {
-			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			res = S3C2410_RES_OK;
-		}
-
-		if (errstat & bit)
-			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-		/* 'next' points to the buffer that is next to the
-		 * currently active buffer.
-		 * For CIRCULAR queues, 'next' will be same as 'curr'
-		 * when 'end' is the active buffer.
-		 */
-		buff = chan->curr;
-		while (buff && buff != chan->next
-				&& buff->next != chan->next)
-			buff = buff->next;
-
-		if (!buff)
-			BUG();
-
-		if (buff == chan->next)
-			buff = chan->end;
-
-		s3c64xx_dma_bufffdone(chan, buff, res);
-
-		/* Free the node and update curr, if non-circular queue */
-		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
-			chan->curr = buff->next;
-			s3c64xx_dma_freebuff(buff);
-		}
-
-		/* Update 'next' */
-		buff = chan->next;
-		if (chan->next == chan->end) {
-			chan->next = chan->curr;
-			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
-				chan->end = NULL;
-		} else {
-			chan->next = buff->next;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct sysdev_class dma_sysclass = {
-	.name		= "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
-			     int irq, unsigned int base)
-{
-	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
-	struct s3c64xx_dmac *dmac;
-	char clkname[16];
-	void __iomem *regs;
-	void __iomem *regptr;
-	int err, ch;
-
-	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
-	if (!dmac) {
-		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
-		return -ENOMEM;
-	}
-
-	dmac->sysdev.id = chno / 8;
-	dmac->sysdev.cls = &dma_sysclass;
-
-	err = sysdev_register(&dmac->sysdev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
-		goto err_alloc;
-	}
-
-	regs = ioremap(base, 0x200);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
-		err = -ENXIO;
-		goto err_dev;
-	}
-
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
-
-	dmac->clk = clk_get(NULL, clkname);
-	if (IS_ERR(dmac->clk)) {
-		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
-		err = PTR_ERR(dmac->clk);
-		goto err_map;
-	}
-
-	clk_enable(dmac->clk);
-
-	dmac->regs = regs;
-	dmac->chanbase = chbase;
-	dmac->channels = chptr;
-
-	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
-	if (err < 0) {
-		printk(KERN_ERR "%s: failed to get irq\n", __func__);
-		goto err_clk;
-	}
-
-	regptr = regs + PL080_Cx_BASE(0);
-
-	for (ch = 0; ch < 8; ch++, chno++, chptr++) {
-		printk(KERN_INFO "%s: registering DMA %d (%p)\n",
-		       __func__, chno, regptr);
-
-		chptr->bit = 1 << ch;
-		chptr->number = chno;
-		chptr->dmac = dmac;
-		chptr->regs = regptr;
-		regptr += PL008_Cx_STRIDE;
-	}
-
-	/* for the moment, permanently enable the controller */
-	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
-	printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
-
-	return 0;
-
-err_clk:
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-err_map:
-	iounmap(regs);
-err_dev:
-	sysdev_unregister(&dmac->sysdev);
-err_alloc:
-	kfree(dmac);
-	return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
-	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
-	if (!dma_pool) {
-		printk(KERN_ERR "%s: failed to create pool\n", __func__);
-		return -ENOMEM;
-	}
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C_SYSREG(0x110));
-
-	/* Register standard DMA controlers */
-	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
-	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
deleted file mode 100644
index 7785604..0000000
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* arch/arm/plat-s3c64xx/gpiolib.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIOlib support 
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/gpio.h>
-#include <mach/gpio-core.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while(0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
-*/
-
-static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-
-}
-
-static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
-	.cfg_eint	= 7,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit[] = {
-	{
-		.base	= S3C64XX_GPA_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S3C64XX_GPB_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S3C64XX_GPC_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S3C64XX_GPD_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S3C64XX_GPE_BASE,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpio2int_gpm,
-		},
-	},
-};
-
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-
-static struct s3c_gpio_chip gpio_4bit2[] = {
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0111,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &gpio_4bit_cfg_eint0011,
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpio2int_gpl,
-		},
-	},
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
-	.cfg_eint	= 2,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
-	.cfg_eint	= 3,
-	.set_config	= s3c_gpio_setcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
-	return IRQ_EINT(0) + pin;
-}
-
-static struct s3c_gpio_chip gpio_2bit[] = {
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S3C64XX_GPI_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S3C64XX_GPJ_BASE,
-		.config	= &gpio_2bit_cfg_noint,
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.config	= &gpio_2bit_cfg_eint10,
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = s3c64xx_gpio2int_gpn,
-		},
-	}, {
-		.base	= S3C64XX_GPO_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.base	= S3C64XX_GPP_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S3C64XX_GPQ_BASE,
-		.config	= &gpio_2bit_cfg_eint11,
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	},
-};
-
-static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
-	chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
-{
-	chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
-}
-
-static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s3c64xx_gpiolib_init(void)
-{
-	s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
-			    s3c64xx_gpiolib_add_4bit);
-
-	s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
-			    s3c64xx_gpiolib_add_4bit2);
-
-	s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
-			    s3c64xx_gpiolib_add_2bit);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_gpiolib_init);
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
deleted file mode 100644
index 8f76a1e..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum s3c2410_dmasrc	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
deleted file mode 100644
index 9aa0e42..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
deleted file mode 100644
index 3933adb..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
deleted file mode 100644
index e22b49f..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
deleted file mode 100644
index 6fe4a49..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
deleted file mode 100644
index 7fcf3d8..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
deleted file mode 100644
index f3faff9..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
deleted file mode 100644
index 35bbd23..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
deleted file mode 100644
index 2ba1767..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
-
-#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
deleted file mode 100644
index ce9ebe3..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0		(0x02 << 0)
-#define S3C64XX_GPI1_VD1		(0x02 << 2)
-#define S3C64XX_GPI2_VD2		(0x02 << 4)
-#define S3C64XX_GPI3_VD3		(0x02 << 6)
-#define S3C64XX_GPI4_VD4		(0x02 << 8)
-#define S3C64XX_GPI5_VD5		(0x02 << 10)
-#define S3C64XX_GPI6_VD6		(0x02 << 12)
-#define S3C64XX_GPI7_VD7		(0x02 << 14)
-#define S3C64XX_GPI8_VD8		(0x02 << 16)
-#define S3C64XX_GPI9_VD9		(0x02 << 18)
-#define S3C64XX_GPI10_VD10		(0x02 << 20)
-#define S3C64XX_GPI11_VD11		(0x02 << 22)
-#define S3C64XX_GPI12_VD12		(0x02 << 24)
-#define S3C64XX_GPI13_VD13		(0x02 << 26)
-#define S3C64XX_GPI14_VD14		(0x02 << 28)
-#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
deleted file mode 100644
index 21a9062..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16		(0x02 << 0)
-#define S3C64XX_GPJ1_VD17		(0x02 << 2)
-#define S3C64XX_GPJ2_VD18		(0x02 << 4)
-#define S3C64XX_GPJ3_VD19		(0x02 << 6)
-#define S3C64XX_GPJ4_VD20		(0x02 << 8)
-#define S3C64XX_GPJ5_VD21		(0x02 << 10)
-#define S3C64XX_GPJ6_VD22		(0x02 << 12)
-#define S3C64XX_GPJ7_VD23		(0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
deleted file mode 100644
index 569e761..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0		(0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1		(0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2		(0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3		(0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4		(0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5		(0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6		(0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7		(0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8		(0x02 << 16)
-#define S3C64XX_GPN9_EINT9		(0x02 << 18)
-#define S3C64XX_GPN10_EINT10		(0x02 << 20)
-#define S3C64XX_GPN11_EINT11		(0x02 << 22)
-#define S3C64XX_GPN12_EINT12		(0x02 << 24)
-#define S3C64XX_GPN13_EINT13		(0x02 << 26)
-#define S3C64XX_GPN14_EINT14		(0x02 << 28)
-#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
deleted file mode 100644
index b09e129..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
deleted file mode 100644
index 92f0051..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
deleted file mode 100644
index 565e60a..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
deleted file mode 100644
index 7956fd3..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Common IRQ support
- */
-
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET	(32)
-
-#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE	S3C_IRQ(0)
-#define S3C_VIC1_BASE	S3C_IRQ(32)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S3C64XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
-
-/* VIC0 */
-
-#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
-#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
-#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
-#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
-#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
-#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
-#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
-#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
-#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
-#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
-#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
-#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
-#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
-#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
-#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
-#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
-#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
-#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
-#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
-#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
-#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
-#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
-#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
-#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
-#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
-#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
-#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
-#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
-#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
-#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
-#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
-#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
-#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
-#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
-#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
-#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
-#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
-#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
-#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
-#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
-#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
-#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
-#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
-#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
-#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
-#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
-#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
-#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
-#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
-#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
-#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
-#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
-#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
-#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
-#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
-#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
-#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
-
-#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
-
-/* compatibility for device defines */
-
-#define IRQ_IIC1		IRQ_S3C6410_IIC1
-
-/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
- * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
- * which we place after the pair of VICs. */
-
-#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
-
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
-#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
-
-/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-#define IRQ_EINT_GROUP1_NR	(15)
-#define IRQ_EINT_GROUP2_NR	(8)
-#define IRQ_EINT_GROUP3_NR	(5)
-#define IRQ_EINT_GROUP4_NR	(14)
-#define IRQ_EINT_GROUP5_NR	(7)
-#define IRQ_EINT_GROUP6_NR	(10)
-#define IRQ_EINT_GROUP7_NR	(16)
-#define IRQ_EINT_GROUP8_NR	(15)
-#define IRQ_EINT_GROUP9_NR	(9)
-
-#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
-#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
-#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
-#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
-#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
-#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
-
-#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
-
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
-#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-
-#define IRQ_BOARD_NR 16
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
-
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h
deleted file mode 100644
index 90bbd72..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/pll.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/pll.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX PLL code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C6400_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S3C6400_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S3C6400_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S3C6400_PLL_MDIV_SHIFT	(16)
-#define S3C6400_PLL_PDIV_SHIFT	(8)
-#define S3C6400_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
-#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
-#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
-#define S3C6400_EPLL_MDIV_SHIFT	(16)
-#define S3C6400_EPLL_PDIV_SHIFT	(8)
-#define S3C6400_EPLL_SDIV_SHIFT	(0)
-#define S3C6400_EPLL_KDIV_MASK  (0xffff)
-
-static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
-{
-	unsigned long result;
-	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
-	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
-	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
-	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
-	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/plat-s3c64xx/include/plat/pm-core.h
deleted file mode 100644
index d347de3..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
-	/* As a note, since the S3C64XX UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-
-	tmp |= S3C_CLKCON_PCLK_UART0;
-	tmp |= S3C_CLKCON_PCLK_UART1;
-	tmp |= S3C_CLKCON_PCLK_UART2;
-	tmp |= S3C_CLKCON_PCLK_UART3;
-
-	__raw_writel(tmp, S3C_PCLK_GATE);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	/* VIC should have already been taken care of */
-
-	/* clear any pending EINT0 interrupts */
-	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-}
-
-/* make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on */
-
-#define s3c_irqwake_eintallow	((1 << 28) - 1)
-#define s3c_irqwake_intallow	(0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	u32 ucon = __raw_readl(regs + S3C2410_UCON);
-	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
-	u32 new_ucon;
-	u32 delta;
-
-	/* S3C64XX UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settigs. */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/* We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/* change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		    !(save_clk & S3C6400_UCON_UCLK0) &&
-		    delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/* as an precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			  ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
deleted file mode 100644
index ff46e7f..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
-#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
-
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_MFC_MASK	(0xf << 28)
-#define S3C6400_CLKDIV0_MFC_SHIFT	(28)
-#define S3C6400_CLKDIV0_JPEG_MASK	(0xf << 24)
-#define S3C6400_CLKDIV0_JPEG_SHIFT	(24)
-#define S3C6400_CLKDIV0_CAM_MASK	(0xf << 20)
-#define S3C6400_CLKDIV0_CAM_SHIFT	(20)
-#define S3C6400_CLKDIV0_SECURITY_MASK	(0x3 << 18)
-#define S3C6400_CLKDIV0_SECURITY_SHIFT	(18)
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* CLKDIV1 */
-#define S3C6410_CLKDIV1_FIMC_MASK	(0xf << 24)
-#define S3C6410_CLKDIV1_FIMC_SHIFT	(24)
-#define S3C6400_CLKDIV1_UHOST_MASK	(0xf << 20)
-#define S3C6400_CLKDIV1_UHOST_SHIFT	(20)
-#define S3C6400_CLKDIV1_SCALER_MASK	(0xf << 16)
-#define S3C6400_CLKDIV1_SCALER_SHIFT	(16)
-#define S3C6400_CLKDIV1_LCD_MASK	(0xf << 12)
-#define S3C6400_CLKDIV1_LCD_SHIFT	(12)
-#define S3C6400_CLKDIV1_MMC2_MASK	(0xf << 8)
-#define S3C6400_CLKDIV1_MMC2_SHIFT	(8)
-#define S3C6400_CLKDIV1_MMC1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV1_MMC1_SHIFT	(4)
-#define S3C6400_CLKDIV1_MMC0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV1_MMC0_SHIFT	(0)
-
-/* CLKDIV2 */
-#define S3C6410_CLKDIV2_AUDIO2_MASK	(0xf << 24)
-#define S3C6410_CLKDIV2_AUDIO2_SHIFT	(24)
-#define S3C6400_CLKDIV2_IRDA_MASK	(0xf << 20)
-#define S3C6400_CLKDIV2_IRDA_SHIFT	(20)
-#define S3C6400_CLKDIV2_UART_MASK	(0xf << 16)
-#define S3C6400_CLKDIV2_UART_SHIFT	(16)
-#define S3C6400_CLKDIV2_AUDIO1_MASK	(0xf << 12)
-#define S3C6400_CLKDIV2_AUDIO1_SHIFT	(12)
-#define S3C6400_CLKDIV2_AUDIO0_MASK	(0xf << 8)
-#define S3C6400_CLKDIV2_AUDIO0_SHIFT	(8)
-#define S3C6400_CLKDIV2_SPI1_MASK	(0xf << 4)
-#define S3C6400_CLKDIV2_SPI1_SHIFT	(4)
-#define S3C6400_CLKDIV2_SPI0_MASK	(0xf << 0)
-#define S3C6400_CLKDIV2_SPI0_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
-/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
-#define S3C_CLKCON_PCLK_UART3		(1<<4)
-#define S3C_CLKCON_PCLK_UART2		(1<<3)
-#define S3C_CLKCON_PCLK_UART1		(1<<2)
-#define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
-
-#define S3C6410_CLKSRC_TV27_MASK	(0x1 << 31)
-#define S3C6410_CLKSRC_TV27_SHIFT	(31)
-#define S3C6410_CLKSRC_DAC27_MASK	(0x1 << 30)
-#define S3C6410_CLKSRC_DAC27_SHIFT	(30)
-#define S3C6400_CLKSRC_SCALER_MASK	(0x3 << 28)
-#define S3C6400_CLKSRC_SCALER_SHIFT	(28)
-#define S3C6400_CLKSRC_LCD_MASK		(0x3 << 26)
-#define S3C6400_CLKSRC_LCD_SHIFT	(26)
-#define S3C6400_CLKSRC_IRDA_MASK	(0x3 << 24)
-#define S3C6400_CLKSRC_IRDA_SHIFT	(24)
-#define S3C6400_CLKSRC_MMC2_MASK	(0x3 << 22)
-#define S3C6400_CLKSRC_MMC2_SHIFT	(22)
-#define S3C6400_CLKSRC_MMC1_MASK	(0x3 << 20)
-#define S3C6400_CLKSRC_MMC1_SHIFT	(20)
-#define S3C6400_CLKSRC_MMC0_MASK	(0x3 << 18)
-#define S3C6400_CLKSRC_MMC0_SHIFT	(18)
-#define S3C6400_CLKSRC_SPI1_MASK	(0x3 << 16)
-#define S3C6400_CLKSRC_SPI1_SHIFT	(16)
-#define S3C6400_CLKSRC_SPI0_MASK	(0x3 << 14)
-#define S3C6400_CLKSRC_SPI0_SHIFT	(14)
-#define S3C6400_CLKSRC_UART_MASK	(0x1 << 13)
-#define S3C6400_CLKSRC_UART_SHIFT	(13)
-#define S3C6400_CLKSRC_AUDIO1_MASK	(0x7 << 10)
-#define S3C6400_CLKSRC_AUDIO1_SHIFT	(10)
-#define S3C6400_CLKSRC_AUDIO0_MASK	(0x7 << 7)
-#define S3C6400_CLKSRC_AUDIO0_SHIFT	(7)
-#define S3C6400_CLKSRC_UHOST_MASK	(0x3 << 5)
-#define S3C6400_CLKSRC_UHOST_SHIFT	(5)
-
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
deleted file mode 100644
index 11f2e1e..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
-extern void s3c6400_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
deleted file mode 100644
index 50dcdd6..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko,  Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern  int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
deleted file mode 100644
index ebdf183..0000000
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= eint_irq_to_bit(irq);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask &= ~eint_irq_to_bit(irq);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
-	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
-	int offs = eint_offset(irq);
-	int pin, pin_val;
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-	void __iomem *reg;
-
-	if (offs > 27)
-		return -EINVAL;
-
-	if (offs <= 15)
-		reg = S3C64XX_EINT0CON0;
-	else
-		reg = S3C64XX_EINT0CON1;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -1;
-	}
-
-	if (offs <= 15)
-		shift = (offs / 2) * 4;
-	else
-		shift = ((offs - 16) / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(reg);
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, reg);
-
-	/* set the GPIO pin appropriately */
-
-	if (offs < 16) {
-		pin = S3C64XX_GPN(offs);
-		pin_val = S3C_GPIO_SFN(2);
-	} else if (offs < 23) {
-		pin = S3C64XX_GPL(offs + 8 - 16);
-		pin_val = S3C_GPIO_SFN(3);
-	} else {
-		pin = S3C64XX_GPM(offs - 23);
-		pin_val = S3C_GPIO_SFN(3);
-	}
-
-	s3c_gpio_cfgpin(pin, pin_val);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "s3c-eint",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S3C64XX_EINT0PEND);
-	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
-		set_irq_chip(irq, &s3c_irq_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
-	set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
-	set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
-	set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/plat-s3c64xx/irq-pm.c
deleted file mode 100644
index ca523b5..0000000
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling Power Management
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-/* We handled all the IRQ types in this code, to save having to make several
- * small files to handle each different type separately. Having the EINT_GRP
- * code here shouldn't be as much bloat as the IRQ table space needed when
- * they are enabled. The added benefit is we ensure that these registers are
- * in the same state as we suspended.
- */
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C64XX_PRIORITY),
-	SAVE_ITEM(S3C64XX_EINT0CON0),
-	SAVE_ITEM(S3C64XX_EINT0CON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
-	SAVE_ITEM(S3C64XX_EINT0MASK),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-};
-
-static struct irq_grp_save {
-	u32	fltcon;
-	u32	con;
-	u32	mask;
-} eint_grp_save[5];
-
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
-		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
-		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	return 0;
-}
-
-static int s3c64xx_irq_pm_resume(struct sys_device *dev)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
-		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
-		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-	return 0;
-}
-
-static struct sysdev_driver s3c64xx_irq_driver = {
-	.suspend = s3c64xx_irq_pm_suspend,
-	.resume	 = s3c64xx_irq_pm_resume,
-};
-
-static int __init s3c64xx_irq_pm_init(void)
-{
-	return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
-}
-
-arch_initcall(s3c64xx_irq_pm_init);
-
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c
deleted file mode 100644
index 8dc5b6d..0000000
--- a/arch/arm/plat-s3c64xx/irq.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	int uart, irq;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
-	vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
-
-	/* add the timer sub-irqs */
-
-	set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s3c64xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
deleted file mode 100644
index 47632fc..0000000
--- a/arch/arm/plat-s3c64xx/pm.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU PM support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
-
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
-	unsigned long flags;
-	u32 reg;
-
-	local_irq_save(flags);
-	reg = __raw_readl(S3C64XX_GPNCON);
-	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
-		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
-	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
-	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
-	__raw_writel(reg, S3C64XX_GPNCON);
-
-	reg = __raw_readl(S3C64XX_GPNDAT);
-	reg &= ~(clear << 12);
-	reg |= set << 12;
-	__raw_writel(reg, S3C64XX_GPNDAT);
-
-	local_irq_restore(flags);
-}
-#endif
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
-	SAVE_ITEM(S3C64XX_MEM0DRVCON),
-	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C64XX_AHB_CON0),
-	SAVE_ITEM(S3C64XX_AHB_CON1),
-	SAVE_ITEM(S3C64XX_AHB_CON2),
-	
-	SAVE_ITEM(S3C64XX_SPCON),
-
-	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
-	SAVE_ITEM(S3C64XX_MEM1CONSLP),
-};
-
-void s3c_pm_configure_extint(void)
-{
-	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
-	__raw_writel(0, S3C64XX_EINT_MASK);
-
-	s3c_pm_debug_smdkled(1 << 2, 0);
-
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-
-/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
- * put the per-cpu code in here until any new cpu comes along and changes
- * this.
- */
-
-static void s3c64xx_cpu_suspend(void)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C64XX_PWR_CFG);
-	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
-	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
-	__raw_writel(tmp, S3C64XX_PWR_CFG);
-
-	/* clear any old wakeup */
-
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
-		     S3C64XX_WAKEUP_STAT);
-
-	/* set the LED state to 0110 over sleep */
-	s3c_pm_debug_smdkled(3 << 1, 0xf);
-
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 5\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
-	/* we should never get past here */
-
-	panic("sleep resumed to originator?");
-}
-
-static void s3c64xx_pm_prepare(void)
-{
-	/* store address of resume. */
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
-
-	/* ensure previous wakeup state is cleared before sleeping */
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
-}
-
-static int s3c64xx_pm_init(void)
-{
-	pm_cpu_prep = s3c64xx_pm_prepare;
-	pm_cpu_sleep = s3c64xx_cpu_suspend;
-	pm_uart_udivslot = 1;
-	return 0;
-}
-
-arch_initcall(s3c64xx_pm_init);
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
deleted file mode 100644
index ffd56de..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6400 based common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_APLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_APLL_MOUT,
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_EPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_EPLL_MOUT,
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S3C6400_CLKSRC_MPLL_MOUT_SHIFT,
-	.mask		= S3C6400_CLKSRC_MPLL_MOUT,
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s3c64xx_clk_arm_get_rate,
-	.set_rate	= s3c64xx_clk_arm_set_rate,
-	.round_rate	= s3c64xx_clk_arm_round_rate,
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clk_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clk_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s3c64xx_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, S3C_CLK_SRC);
-
-		clk->parent = parent;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC0_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC1_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_MMC2_SHIFT,
-	.mask		= S3C6400_CLKSRC_MMC2_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV1_MMC2_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UHOST_SHIFT,
-	.mask		= S3C6400_CLKSRC_UHOST_MASK,
-	.sources	= &clkset_uhost,
-	.divider_shift	= S3C6400_CLKDIV1_UHOST_SHIFT,
-	.reg_divider	= S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_UART_SHIFT,
-	.mask		= S3C6400_CLKSRC_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S3C6400_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI0_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI0_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_SPI1_SHIFT,
-	.mask		= S3C6400_CLKSRC_SPI1_MASK,
-	.sources	= &clkset_spi_mmc,
-	.divider_shift	= S3C6400_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO0_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO0_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clk_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_AUDIO1_SHIFT,
-	.mask		= S3C6400_CLKSRC_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S3C6400_CLKDIV2_AUDIO1_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
-	.clk	= {
-		.name		= "irda-bus",
-		.id		= 0,
-		.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= S3C6400_CLKSRC_IRDA_SHIFT,
-	.mask		= S3C6400_CLKSRC_IRDA_MASK,
-	.sources	= &clkset_irda,
-	.divider_shift	= S3C6400_CLKDIV2_IRDA_SHIFT,
-	.reg_divider	= S3C_CLK_DIV2,
-};
-
-static struct clk *clkset_camif_list[] = {
-	&clk_h2,
-};
-
-static struct clk_sources clkset_camif = {
-	.sources	= clkset_camif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clk_camif = {
-	.clk	= {
-		.name		= "camera",
-		.id		= -1,
-		.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-		.enable		= s3c64xx_sclk_ctrl,
-		.set_parent	= s3c64xx_setparent_clksrc,
-		.get_rate	= s3c64xx_getrate_clksrc,
-		.set_rate	= s3c64xx_setrate_clksrc,
-		.round_rate	= s3c64xx_roundrate_clksrc,
-	},
-	.shift		= 0,
-	.mask		= 0,
-	.sources	= &clkset_camif,
-	.divider_shift	= S3C6400_CLKDIV0_CAM_SHIFT,
-	.reg_divider	= S3C_CLK_DIV0,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
-	&clk_uart_uclk1,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_irda,
-	&clk_camif,
-};
-
-static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(S3C_CLK_SRC);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c6400_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c6400_get_epll(xtal);
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c6400_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
-	&clk_uart_uclk1.clk,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_irda.clk,
-	&clk_camif.clk,
-	&clk_arm,
-};
-
-/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
- *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
- *
- * This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	armclk_mask = armclk_divlimit;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c
deleted file mode 100644
index 3644807..0000000
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 0 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
-	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
-	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c
deleted file mode 100644
index bbe229b..0000000
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 1 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
-	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
-	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/plat-s3c64xx/sleep.S
deleted file mode 100644
index 8e71fe9..0000000
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ /dev/null
@@ -1,144 +0,0 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU sleep code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#undef S3C64XX_VA_GPIO
-#define S3C64XX_VA_GPIO (0x0)
-
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
-
-#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
-
-	.text
-
-	/* s3c_cpu_save
-	 *
-	 * Save enough processor state to allow the restart of the pm.c
-	 * code after resume.
-	 *
-	 * entry:
-	 *	r0 = pointer to the save block
-	*/
-
-ENTRY(s3c_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-
-	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
-
-	@@ save our state to ram
-	bl	s3c_pm_cb_flushcache
-
-	@@ call final suspend code
-	ldr	r0, =pm_cpu_sleep
-	ldr	pc, [r0]
-	
-	@@ return to the caller, after the MMU is turned on.
-	@@ restore the last bits of the stack and return.
-resume_with_mmu:
-	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
-
-	.data
-
-	/* the next bit is code, but it requires easy access to the
-	 * s3c_sleep_save_phys data before the MMU is switched on, so
-	 * we store the code that needs this variable in the .data where
-	 * the value can be written to (the .text segment is RO).
-	*/
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
-	/* Sleep magic, the word before the resume entry point so that the
-	 * bootloader can check for a resumeable image. */
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_reusme
-	 *
-	 * This is the entry point, stored by whatever method the bootloader
-	 * requires to get the kernel runnign again. This code expects to be
-	 * entered with no caches live and the MMU disabled. It will then
-	 * restore the MMU and other basic CP registers saved and restart
-	 * the kernel C code to finish the resume code.
-	*/
-
-ENTRY(s3c_cpu_resume)
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	ldr	r2, =LL_UART		/* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
-	 * as the uboot version supplied resets these to inputs during the
-	 * resume checks.
-	*/
-
-	ldr	r3, =S3C64XX_PA_GPIO
-	ldr	r0, [ r3, #S3C64XX_GPNCON ]
-	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
-			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
-	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
-			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
-	str	r0, [ r3, #S3C64XX_GPNCON ]
-
-	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
-	bic	r0, r0, #0xf << 12			@ GPN12..15
-	orr	r0, r0, #1 << 15			@ GPN15
-	str	r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
-
-	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
-	 * are thoroughly cleaned just in case the bootloader didn't do it
-	 * for us. */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
-	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
-
-	ldr	r0, s3c_sleep_save_phys
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-
-	mov	r0, #0			@ restore copro access controls
-	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
-	nop
-	mov	pc, r2				/* jump back */
-
-	.end
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
new file mode 100644
index 0000000..11d6a1b
--- /dev/null
+++ b/arch/arm/plat-s5p/Kconfig
@@ -0,0 +1,32 @@
+# arch/arm/plat-s5p/Kconfig
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+config PLAT_S5P
+	bool
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
+	default y
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S5P_GPIO_DRVSTR
+	select SAMSUNG_GPIOLIB_4BIT
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select PLAT_SAMSUNG
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	help
+	  Base platform code for Samsung's S5P series SoC.
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440.
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
new file mode 100644
index 0000000..39c242b
--- /dev/null
+++ b/arch/arm/plat-s5p/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/plat-s5p/Makefile
+#
+# Copyright (c) 2009 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= irq.o
+obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
+
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
new file mode 100644
index 0000000..b5e2552
--- /dev/null
+++ b/arch/arm/plat-s5p/clock.c
@@ -0,0 +1,163 @@
+/* linux/arch/arm/plat-s5p/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p-clock.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * clk_ext_xtal_mux.
+*/
+struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+};
+
+struct clk s5p_clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+/* 48MHz USB Phy clock output */
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
+/* APLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+/* MPLL clock output
+ * No need .ctrlbit, this is always on
+*/
+struct clk clk_fout_mpll = {
+	.name		= "fout_mpll",
+	.id		= -1,
+};
+
+/* EPLL clock output */
+struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+	.name		= "fout_vpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
+/* ARM clock */
+struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.rate		= 0,
+	.ctrlbit	= 0,
+};
+
+/* Possible clock sources for APLL Mux */
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+struct clksrc_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+/* Possible clock sources for MPLL Mux */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+struct clksrc_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+/* Possible clock sources for EPLL Mux */
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+struct clksrc_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+struct clk clk_vpll = {
+	.name		= "vpll",
+	.id		= -1,
+};
+
+int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static struct clk *s5p_clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_48m,
+	&s5p_clk_27m,
+	&clk_fout_apll,
+	&clk_fout_mpll,
+	&clk_fout_epll,
+	&clk_fout_vpll,
+	&clk_arm,
+	&clk_vpll,
+	&clk_xusbxti,
+};
+
+void __init s5p_register_clocks(unsigned long xtal_freq)
+{
+	int ret;
+
+	clk_ext_xtal_mux.rate = xtal_freq;
+
+	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register s5p clocks\n");
+}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
new file mode 100644
index 0000000..75cb8c3
--- /dev/null
+++ b/arch/arm/plat-s5p/cpu.c
@@ -0,0 +1,123 @@
+/* linux/arch/arm/plat-s5p/cpu.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6442.h>
+#include <plat/s5pc100.h>
+#include <plat/s5pv210.h>
+
+/* table of supported CPUs */
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pc100[] = "S5PC100";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x56440100,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6440_map_io,
+		.init_clocks	= s5p6440_init_clocks,
+		.init_uarts	= s5p6440_init_uarts,
+		.init		= s5p6440_init,
+		.name		= name_s5p6440,
+	}, {
+		.idcode		= 0x36442000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6442_map_io,
+		.init_clocks	= s5p6442_init_clocks,
+		.init_uarts	= s5p6442_init_uarts,
+		.init		= s5p6442_init,
+		.name		= name_s5p6442,
+	}, {
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	}, {
+		.idcode		= 0x43110000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pv210_map_io,
+		.init_clocks	= s5pv210_init_clocks,
+		.init_uarts	= s5pv210_init_uarts,
+		.init		= s5pv210_init,
+		.name		= name_s5pv210,
+	},
+};
+
+/* minimal IO mapping */
+
+static struct map_desc s5p_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5P_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr)
+{
+	unsigned long idcode;
+
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(cpuid_addr);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
new file mode 100644
index 0000000..a89331e
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -0,0 +1,139 @@
+/* linux/arch/arm/plat-s5p/dev-uart.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base S5P UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+ /* Serial port registrations */
+
+static struct resource s5p_uart0_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART0,
+		.end	= S5P_PA_UART0 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX0,
+		.end	= IRQ_S5P_UART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX0,
+		.end	= IRQ_S5P_UART_TX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR0,
+		.end	= IRQ_S5P_UART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5p_uart1_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART1,
+		.end	= S5P_PA_UART1 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX1,
+		.end	= IRQ_S5P_UART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX1,
+		.end	= IRQ_S5P_UART_TX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR1,
+		.end	= IRQ_S5P_UART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart2_resource[] = {
+	[0] = {
+		.start	= S5P_PA_UART2,
+		.end	= S5P_PA_UART2 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX2,
+		.end	= IRQ_S5P_UART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX2,
+		.end	= IRQ_S5P_UART_TX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR2,
+		.end	= IRQ_S5P_UART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[0] = {
+		.start	= S5P_PA_UART3,
+		.end	= S5P_PA_UART3 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX3,
+		.end	= IRQ_S5P_UART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX3,
+		.end	= IRQ_S5P_UART_TX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR3,
+		.end	= IRQ_S5P_UART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5p_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5p_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5p_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5p_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
+	},
+};
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
new file mode 100644
index 0000000..3fb3a3a
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -0,0 +1,97 @@
+/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_IRQS_H
+#define __ASM_PLAT_S5P_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET		(32)
+
+#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE		S5P_IRQ(0)
+#define S5P_VIC1_BASE		S5P_IRQ(32)
+#define S5P_VIC2_BASE		S5P_IRQ(64)
+#define S5P_VIC3_BASE		S5P_IRQ(96)
+
+#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
+
+#define IRQ_VIC0_BASE		S5P_VIC0_BASE
+#define IRQ_VIC1_BASE		S5P_VIC1_BASE
+#define IRQ_VIC2_BASE		S5P_VIC2_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0	(16)
+#define IRQ_S5P_UART_BASE1	(20)
+#define IRQ_S5P_UART_BASE2	(24)
+#define IRQ_S5P_UART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+
+#define IRQ_S5P_UART_RX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0	(IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0	(IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1	(IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1	(IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2	(IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2	(IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3	(IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3	(IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0		IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1		IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2		IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3		IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
+
+#define S5P_TIMER_IRQ(x)	(11 + (x))
+
+#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
+
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+					: ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
+						((irq) - S5P_EINT_BASE1) : \
+						((irq) + 16 - S5P_EINT_BASE2))
+
+#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 0000000..1482852
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
+#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
+#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
+#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET		(0x400)
+
+#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0			VA_VIC(0)
+#define VA_VIC1			VA_VIC(1)
+#define VA_VIC2			VA_VIC(2)
+#define VA_VIC3			VA_VIC(3)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
new file mode 100644
index 0000000..7db3227
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -0,0 +1,105 @@
+/* arch/arm/plat-s5p/include/plat/pll.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P PLL code
+ *
+ * Based on arch/arm/plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PLL45XX_MDIV_MASK	(0x3FF)
+#define PLL45XX_PDIV_MASK	(0x3F)
+#define PLL45XX_SDIV_MASK	(0x7)
+#define PLL45XX_MDIV_SHIFT	(16)
+#define PLL45XX_PDIV_SHIFT	(8)
+#define PLL45XX_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+enum pll45xx_type_t {
+	pll_4500,
+	pll_4502,
+	pll_4508
+};
+
+static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
+					    enum pll45xx_type_t pll_type)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+	if (pll_type == pll_4508)
+		sdiv = sdiv - 1;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL90XX_MDIV_MASK	(0xFF)
+#define PLL90XX_PDIV_MASK	(0x3F)
+#define PLL90XX_SDIV_MASK	(0x7)
+#define PLL90XX_KDIV_MASK	(0xffff)
+#define PLL90XX_MDIV_SHIFT	(16)
+#define PLL90XX_PDIV_SHIFT	(8)
+#define PLL90XX_SDIV_SHIFT	(0)
+#define PLL90XX_KDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
+					    u32 pll_con, u32 pll_conk)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
+	kdiv = pll_conk & PLL90XX_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
+#define PLL65XX_MDIV_MASK	(0x3FF)
+#define PLL65XX_PDIV_MASK	(0x3F)
+#define PLL65XX_SDIV_MASK	(0x7)
+#define PLL65XX_MDIV_SHIFT	(16)
+#define PLL65XX_PDIV_SHIFT	(8)
+#define PLL65XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
new file mode 100644
index 0000000..09418b1
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_CLOCK_H
+#define __ASM_PLAT_S5P_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
+extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
+extern struct clk clk_fout_apll;
+extern struct clk clk_fout_mpll;
+extern struct clk clk_fout_epll;
+extern struct clk clk_fout_vpll;
+extern struct clk clk_arm;
+extern struct clk clk_vpll;
+
+extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_mpll;
+extern struct clksrc_sources clk_src_epll;
+
+extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
+extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+
+#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
new file mode 100644
index 0000000..a4cd75a
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s5p/include/plat/s5p6440.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ /* Common init code for S5P6440 related SoCs */
+
+extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6440_register_clocks(void);
+extern void s5p6440_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p6440_init(void);
+extern void s5p6440_init_irq(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+#define s5p6440_init_uarts s5p6440_common_init_uarts
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p6440_init NULL
+#endif
+
+/* S5P6440 timer */
+
+extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
new file mode 100644
index 0000000..7b88013
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6442.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5p6442.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5p6442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6442 related SoCs */
+
+extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6442_register_clocks(void);
+extern void s5p6442_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6442
+
+extern  int s5p6442_init(void);
+extern void s5p6442_init_irq(void);
+extern void s5p6442_map_io(void);
+extern void s5p6442_init_clocks(int xtal);
+
+#define s5p6442_init_uarts s5p6442_common_init_uarts
+
+#else
+#define s5p6442_init_clocks NULL
+#define s5p6442_init_uarts NULL
+#define s5p6442_map_io NULL
+#define s5p6442_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h
new file mode 100644
index 0000000..5f6099d
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pc100.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 0000000..6c93a0c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern  int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
new file mode 100644
index 0000000..f36cd33
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -0,0 +1,218 @@
+/* linux/arch/arm/plat-s5p/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static inline void s5p_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(irq);
+	s5p_irq_eint_ack(irq);
+}
+
+static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = EINT_OFFSET(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.mask		= s5p_irq_eint_mask,
+	.unmask		= s5p_irq_eint_unmask,
+	.mask_ack	= s5p_irq_eint_maskack,
+	.ack		= s5p_irq_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_mask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_unmask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(unsigned int irq)
+{
+	s5p_irq_vic_eint_mask(irq);
+	s5p_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.mask		= s5p_irq_vic_eint_mask,
+	.unmask		= s5p_irq_vic_eint_unmask,
+	.mask_ack	= s5p_irq_vic_eint_maskack,
+	.ack		= s5p_irq_vic_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		set_irq_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s5p_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
new file mode 100644
index 0000000..25e1eb6
--- /dev/null
+++ b/arch/arm/plat-s5p/irq.c
@@ -0,0 +1,72 @@
+/* arch/arm/plat-s5p/irq.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <linux/serial_core.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+
+/*
+ * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct s3c_uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= S5P_VA_UART0,
+		.base_irq	= IRQ_S5P_UART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= S5P_VA_UART1,
+		.base_irq	= IRQ_S5P_UART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= S5P_VA_UART2,
+		.base_irq	= IRQ_S5P_UART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
+	[3] = {
+		.regs		= S5P_VA_UART3,
+		.base_irq	= IRQ_S5P_UART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+#endif
+};
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+	int irq;
+
+	/* initialize the VICs */
+	for (irq = 0; irq < num_vic; irq++)
+		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+
+	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
deleted file mode 100644
index b7b9e91..0000000
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-#	Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
-	bool
-	depends on ARCH_S5PC1XX
-	default y
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S5P_GPIO_CFG_S5PC1XX
-	help
-	  Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
-	bool
-	help
-	  Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
-	bool
-	help
-	  Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-config S5PC1XX_SETUP_FB_24BPP
-	bool
-	help
-          Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC1XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S5PC1XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5PC1XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
deleted file mode 100644
index 278f268..0000000
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o irq-gpio.o irq-eint.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
-
-# Device setup
-
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
-obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
deleted file mode 100644
index 26c21d8..0000000
--- a/arch/arm/plat-s5pc1xx/clock.c
+++ /dev/null
@@ -1,728 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5PC100_CLKSRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
-	__raw_writel(val, S5PC100_CLKSRC1);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-static int clk_dummy_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
-};
-
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-	.enable		= clk_dummy_enable,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	},
-};
-
-static struct clk s5pc100_init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
-
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
-
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
-	},
-
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
-
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
-
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
-	},
-
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
-
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
-
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
-
-	/* Audio (D2_0) devices: all disabled */
-
-	/* Special Clocks 0 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
-	/* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-	int size;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	clkp = s5pc100_init_clocks;
-	size = ARRAY_SIZE(s5pc100_init_clocks);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = s5pc100_init_clocks_disable;
-	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
deleted file mode 100644
index 02baeaa..0000000
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	},
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
-		.length		= SZ_16,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
-	iotable_init(mach_desc, size);
-
-	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
deleted file mode 100644
index f749bc5..0000000
--- a/arch/arm/plat-s5pc1xx/dev-uart.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s5pc1xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s5pc1xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s5pc1xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s5pc1xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
-	},
-};
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
-
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
deleted file mode 100644
index bba675d..0000000
--- a/arch/arm/plat-s5pc1xx/gpio-config.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
-	drvstr = drvstr >> shift;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
deleted file mode 100644
index facb410..0000000
--- a/arch/arm/plat-s5pc1xx/gpiolib.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * arch/arm/plat-s5pc1xx/gpiolib.c
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC1XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/gpio-core.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s5pc1xx_gpiolib routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
- */
-
-static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
-	int base;
-
-	base = chip->base - S5PC100_GPH0(0);
-	if (base == 0)
-		return IRQ_EINT(offset);
-	base = chip->base - S5PC100_GPH1(0);
-	if (base == 0)
-		return IRQ_EINT(8 + offset);
-	base = chip->base - S5PC100_GPH2(0);
-	if (base == 0)
-		return IRQ_EINT(16 + offset);
-	base = chip->base - S5PC100_GPH3(0);
-	if (base == 0)
-		return IRQ_EINT(24 + offset);
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.base	= S5PC100_GPA0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.base	= S5PC100_GPA1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.base	= S5PC100_GPB_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5PC100_GPC_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5PC100_GPD_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5PC100_GPE0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.base	= S5PC100_GPE1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.base	= S5PC100_GPF0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.base	= S5PC100_GPF1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.base	= S5PC100_GPF2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.base	= S5PC100_GPF3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.base	= S5PC100_GPG0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.base	= S5PC100_GPG1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.base	= S5PC100_GPG2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.base	= S5PC100_GPG3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.base	= S5PC100_GPH0_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.base	= S5PC100_GPH1_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-		},
-	}, {
-		.base	= S5PC100_GPH2_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-		},
-	}, {
-		.base	= S5PC100_GPH3_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-		},
-	}, {
-		.base	= S5PC100_GPI_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5PC100_GPJ0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.base	= S5PC100_GPJ1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.base	= S5PC100_GPJ2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.base	= S5PC100_GPJ3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.base	= S5PC100_GPJ4_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.base	= S5PC100_GPK0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.base	= S5PC100_GPK1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.base	= S5PC100_GPK2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.base	= S5PC100_GPK3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.base	= S5PC100_GPL0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.base	= S5PC100_GPL1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.base	= S5PC100_GPL2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.base	= S5PC100_GPL3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.base	= S5PC100_GPL4_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	},
-};
-
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc1xx_gpioint;
-extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s5pc1xx_gpiolib_input;
-	chip->chip.direction_output = s5pc1xx_gpiolib_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-
-	/* Interrupt */
-	if (chip->config == &gpio_cfg) {
-		int i, irq;
-
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
-
-		for (i = 0;  i < chip->chip.ngpio; i++) {
-			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc1xx_gpioint);
-			set_irq_data(irq, &chip->chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	} else if (chip->config == &gpio_cfg_eint)
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-}
-
-static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s5pc1xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chips;
-	int nr_chips;
-
-		chips = s5pc100_gpio_chips;
-		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
-	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
-	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-
-	return 0;
-}
-core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
deleted file mode 100644
index 72ad59f..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1	0x00
-#define S5P_GPIO_DRVSTR_LV2	0x01
-#define S5P_GPIO_DRVSTR_LV3	0x10
-#define S5P_GPIO_DRVSTR_LV4	0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
deleted file mode 100644
index 33ad267..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
-#define S5PC1XX_WKUP_INT_HILEV		(0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
deleted file mode 100644
index ef87363..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET		(32)
-
-#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE		S3C_IRQ(0)
-#define S3C_VIC1_BASE		S3C_IRQ(32)
-#define S3C_VIC2_BASE		S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
-
-#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
deleted file mode 100644
index 21afef1..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/pll.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT	(16)
-#define S5P_PLL_PDIV_SHIFT	(8)
-#define S5P_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
deleted file mode 100644
index c5cc86e..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ /dev/null
@@ -1,359 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN			(1<<31)
-#define S5PC100_EPLL_MASK		0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0 */
-#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
-#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
-#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
-#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
-#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
-#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
-#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
-
-
-/* CLKSRC1 */
-#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
-#define S5PC100_CLKSRC1_UART_SHIFT		(0)
-#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
-#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
-#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
-#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
-#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
-#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
-#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
-#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
-#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
-#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
-#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
-
-/* CLKSRC2 */
-#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
-#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
-#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
-#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
-#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
-#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
-#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
-#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
-#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
-#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
-#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
-#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
-#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
-#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
-#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
-
-/* CLKSRC3 */
-#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
-#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
-#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
-#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
-#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
-#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
-#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
-#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
-#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
-#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
-#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
-#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
-#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT		(8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
-#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
-
-/* CLKDIV1 */
-#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
-#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
-#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
-#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT		(12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
-#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
-#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
-#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
-
-/* CLKDIV2 */
-#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
-#define S5PC100_CLKDIV2_UART_SHIFT		(0)
-#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
-#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
-#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
-#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
-#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
-#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
-#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
-#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
-#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
-#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
-
-/* CLKDIV3 */
-#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
-#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
-#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
-#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
-#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
-#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
-#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
-#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
-#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
-#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
-#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
-#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
-#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
-#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
-#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
-
-/* CLKDIV4 */
-#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
-#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
-#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
-#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
-#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
-#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
-#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
-#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
-#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
-#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
-#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
-#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC		(1<<0)
-#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
-#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
-#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
-#define S5PC100_CLKGATE_D00_G2D		(1<<4)
-#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC		(1<<0)
-#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
-#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
-#define S5PC100_CLKGATE_D01_EBI		(1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
-#define S5PC100_CLKGATE_D02_SDM		(1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD		(1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
-#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
-#define S5PC100_CLKGATE_D11_DSI		(1<<6)
-#define S5PC100_CLKGATE_D11_CSI		(1<<7)
-#define S5PC100_CLKGATE_D11_G3D		(1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV		(1<<0)
-#define S5PC100_CLKGATE_D12_VP		(1<<1)
-#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
-#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
-#define S5PC100_CLKGATE_D12_MFC		(1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
-#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
-#define S5PC100_CLKGATE_D13_APC		(1<<2)
-#define S5PC100_CLKGATE_D13_IEC		(1<<3)
-#define S5PC100_CLKGATE_D13_PWM		(1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
-#define S5PC100_CLKGATE_D13_WDT		(1<<8)
-#define S5PC100_CLKGATE_D13_RTC		(1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0		(1<<0)
-#define S5PC100_CLKGATE_D14_UART1		(1<<1)
-#define S5PC100_CLKGATE_D14_UART2		(1<<2)
-#define S5PC100_CLKGATE_D14_UART3		(1<<3)
-#define S5PC100_CLKGATE_D14_IIC		(1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
-#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
-#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
-#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
-#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
-#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
-#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
-#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
-#define S5PC100_CLKGATE_D15_AC97		(1<<3)
-#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
-#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
-#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
-#define S5PC100_CLKGATE_D15_CG		(1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
-#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
-#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
-#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
-#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
-#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
-#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
-#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
-#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
-#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
-#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
-#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
-#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
-#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
-#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
-#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
-#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
-#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
-#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
-#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
-#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
-#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
-#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
-#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
-#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
-#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
-
-#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL	0xc100
-#define S5PC100_OTHER_SYS_INT	24
-#define S5PC100_OTHER_STA_TYPE	23
-#define STA_TYPE_EXPON		0
-#define STA_TYPE_SFR		1
-
-#define S5PC100_SLEEP_CFG_OSC_EN	0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
deleted file mode 100644
index 43c7bc8..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
-#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* S5PC100 */
-#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
-#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
-
-#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
-#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
-
-/* PDNEN */
-#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
-#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
-#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
-#define S5PC100_PDNEN_NORMAL	(0 << 0)
-
-/* Common part */
-/* External interrupt base is same at both s5pc100 and s5pc110 */
-#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
-
-#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-
-#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
-
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
deleted file mode 100644
index 02ffa49..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE			(1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
deleted file mode 100644
index 2531f34..0000000
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern  int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern  int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
deleted file mode 100644
index 373122f..0000000
--- a/arch/arm/plat-s5pc1xx/irq-eint.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- *  Copyright 2009 Samsung Electronics Co.
- *  Byungho Min <bhmin@samsung.com>
- *  Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
-	int real;
-
-	if (irq < IRQ_EINT16_31)
-		real = (irq - IRQ_EINT0);
-	else
-		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
-	return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
-	return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
-	int real, bit;
-
-	real = s3c_get_eint(irq);
-	bit = 1 << (real & (8 - 1));
-
-	return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask |= s3c_eint_to_bit(irq);
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask &= ~(s3c_eint_to_bit(irq));
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
-	u32 bank = s3c_get_bank(irq);
-
-	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
-	u32 bank = s3c_get_bank(irq);
-	int real = s3c_get_eint(irq);
-	int gpio, shift, sfn;
-	u32 ctrl, con = 0;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		con = S5PC1XX_WKUP_INT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		con = S5PC1XX_WKUP_INT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		con = S5PC1XX_WKUP_INT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		con = S5PC1XX_WKUP_INT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		con = S5PC1XX_WKUP_INT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	gpio = real & (8 - 1);
-	shift = gpio << 2;
-
-	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
-	ctrl &= ~(0x7 << shift);
-	ctrl |= con << shift;
-	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
-	switch (real) {
-	case 0 ... 7:
-			gpio = S5PC100_GPH0(gpio);
-		break;
-	case 8 ... 15:
-			gpio = S5PC100_GPH1(gpio);
-		break;
-	case 16 ... 23:
-			gpio = S5PC100_GPH2(gpio);
-		break;
-	case 24 ... 31:
-			gpio = S5PC100_GPH3(gpio);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	sfn = S3C_GPIO_SFN(0x2);
-	s3c_gpio_cfgpin(gpio, sfn);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
-	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
-	unsigned int irq;
-
-	status &= ~mask;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(16, 23);
-	s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_mask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_unmask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
-	u32 bit;
-	u32 bank = s3c_get_bank(irq);
-
-	bit = s3c_eint_to_bit(irq);
-	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_vic_eint_mask(irq);
-	s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_vic_eint_mask,
-	.unmask		= s3c_irq_vic_eint_unmask,
-	.mask_ack	= s3c_irq_vic_eint_maskack,
-	.ack		= s3c_irq_vic_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
-		set_irq_chip(irq, &s3c_irq_vic_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
-		set_irq_chip(irq, &s3c_irq_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
-	return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
deleted file mode 100644
index fecca7a..0000000
--- a/arch/arm/plat-s5pc1xx/irq-gpio.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * arch/arm/plat-s5pc1xx/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
-
-#define CON_OFFSET			0x700
-#define MASK_OFFSET			0x900
-#define PEND_OFFSET			0xA00
-#define CON_OFFSET_2			0xE00
-#define MASK_OFFSET_2			0xF00
-#define PEND_OFFSET_2			0xF40
-
-#define GPIOINT_LEVEL_LOW		0x0
-#define GPIOINT_LEVEL_HIGH		0x1
-#define GPIOINT_EDGE_FALLING		0x2
-#define GPIOINT_EDGE_RISING		0x3
-#define GPIOINT_EDGE_BOTH		0x4
-
-static int group_to_con_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
-	return group << 2;
-}
-
-static int s5pc1xx_get_start(unsigned int group)
-{
-	switch (group) {
-	case 0: return S5PC100_GPIO_A0_START;
-	case 1: return S5PC100_GPIO_A1_START;
-	case 2: return S5PC100_GPIO_B_START;
-	case 3: return S5PC100_GPIO_C_START;
-	case 4: return S5PC100_GPIO_D_START;
-	case 5: return S5PC100_GPIO_E0_START;
-	case 6: return S5PC100_GPIO_E1_START;
-	case 7: return S5PC100_GPIO_F0_START;
-	case 8: return S5PC100_GPIO_F1_START;
-	case 9: return S5PC100_GPIO_F2_START;
-	case 10: return S5PC100_GPIO_F3_START;
-	case 11: return S5PC100_GPIO_G0_START;
-	case 12: return S5PC100_GPIO_G1_START;
-	case 13: return S5PC100_GPIO_G2_START;
-	case 14: return S5PC100_GPIO_G3_START;
-	case 15: return S5PC100_GPIO_I_START;
-	case 16: return S5PC100_GPIO_J0_START;
-	case 17: return S5PC100_GPIO_J1_START;
-	case 18: return S5PC100_GPIO_J2_START;
-	case 19: return S5PC100_GPIO_J3_START;
-	case 20: return S5PC100_GPIO_J4_START;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc1xx_get_group(unsigned int irq)
-{
-	irq -= S3C_IRQ_GPIO(0);
-
-	switch (irq) {
-	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
-		return 0;
-	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
-		return 1;
-	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
-		return 2;
-	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
-		return 3;
-	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
-		return 4;
-	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
-		return 5;
-	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
-		return 6;
-	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
-		return 7;
-	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
-		return 8;
-	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
-		return 9;
-	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
-		return 10;
-	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
-		return 11;
-	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
-		return 12;
-	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
-		return 13;
-	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
-		return 14;
-	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
-		return 15;
-	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
-		return 16;
-	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
-		return 17;
-	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
-		return 18;
-	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
-		return 19;
-	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
-		return 20;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc1xx_get_offset(unsigned int irq)
-{
-	struct gpio_chip *chip = get_irq_data(irq);
-	return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc1xx_gpioint_ack(unsigned int irq)
-{
-	int group, offset, pend_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	pend_offset = group_to_pend_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc1xx_gpioint_mask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc1xx_gpioint_unmask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-	value &= ~(1 << offset);
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
-{
-	s5pc1xx_gpioint_mask(irq);
-	s5pc1xx_gpioint_ack(irq);
-}
-
-static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
-{
-	int group, offset, con_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	con_offset = group_to_con_offset(group);
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	case IRQ_TYPE_EDGE_RISING:
-		type = GPIOINT_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = GPIOINT_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = GPIOINT_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = GPIOINT_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = GPIOINT_LEVEL_LOW;
-		break;
-	default:
-		BUG();
-	}
-
-
-	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
-	value &= ~(0xf << (offset * 0x4));
-	value |= (type << (offset * 0x4));
-	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
-
-	return 0;
-}
-
-struct irq_chip s5pc1xx_gpioint = {
-	.name		= "GPIO",
-	.ack		= s5pc1xx_gpioint_ack,
-	.mask		= s5pc1xx_gpioint_mask,
-	.mask_ack	= s5pc1xx_gpioint_mask_ack,
-	.unmask		= s5pc1xx_gpioint_unmask,
-	.set_type	= s5pc1xx_gpioint_set_type,
-};
-
-void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int group, offset, pend_offset, mask_offset;
-	int real_irq, group_end;
-	unsigned int pend, mask;
-
-	group_end = 21;
-
-	for (group = 0; group < group_end; group++) {
-		pend_offset = group_to_pend_offset(group);
-		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = group_to_mask_offset(group);
-		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-		pend &= ~mask;
-
-		for (offset = 0; offset < 8; offset++) {
-			if (pend & (1 << offset)) {
-				real_irq = s5pc1xx_get_start(group) + offset;
-				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
-			}
-		}
-	}
-}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
deleted file mode 100644
index e44fd04..0000000
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-
-/* Timer interrupt handling */
-
-static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
-{
-	generic_handle_irq(sub_irq);
-}
-
-static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER0);
-}
-
-static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER1);
-}
-
-static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER2);
-}
-
-static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER3);
-}
-
-static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_timer(irq, IRQ_TIMER4);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-
-static void s3c_irq_timer_mask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg &= ~(1 << (irq - IRQ_TIMER0));
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_unmask(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= 1 << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static void s3c_irq_timer_ack(unsigned int irq)
-{
-	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
-
-	reg &= 0x1f;  /* mask out pending interrupts */
-	reg |= (1 << 5) << (irq - IRQ_TIMER0);
-	__raw_writel(reg, S3C64XX_TINT_CSTAT);
-}
-
-static struct irq_chip s3c_irq_timer = {
-	.name		= "s3c-timer",
-	.mask		= s3c_irq_timer_mask,
-	.unmask		= s3c_irq_timer_unmask,
-	.ack		= s3c_irq_timer_ack,
-};
-
-struct uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= (void *)S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= (void *)S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= (void *)S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= (void *)S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
-{
-	struct uart_irq *uirq = get_irq_chip_data(irq);
-	return uirq->regs;
-}
-
-static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
-{
-	return irq & 3;
-}
-
-/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP	0x30
-#define S3C64XX_UINTSP	0x34
-#define S3C64XX_UINTM	0x38
-
-static void s3c_irq_uart_mask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_maskack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg |= (1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_uart_unmask(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-	u32 reg;
-
-	reg = __raw_readl(regs + S3C64XX_UINTM);
-	reg &= ~(1 << bit);
-	__raw_writel(reg, regs + S3C64XX_UINTM);
-}
-
-static void s3c_irq_uart_ack(unsigned int irq)
-{
-	void __iomem *regs = s3c_irq_uart_base(irq);
-	unsigned int bit = s3c_irq_uart_bit(irq);
-
-	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
-}
-
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-}
-
-static struct irq_chip s3c_irq_uart = {
-	.name		= "s3c-uart",
-	.mask		= s3c_irq_uart_mask,
-	.unmask		= s3c_irq_uart_unmask,
-	.mask_ack	= s3c_irq_uart_maskack,
-	.ack		= s3c_irq_uart_ack,
-};
-
-static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	unsigned int irq;
-	int offs;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	for (offs = 0; offs < 3; offs++) {
-		irq = uirq->base_irq + offs;
-
-		set_irq_chip(irq, &s3c_irq_uart);
-		set_irq_chip_data(irq, uirq);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
-	int i;
-	int uart, irq;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	for (i = 0; i < num; i++)
-		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
-				vic_valid[i], 0);
-
-	/* add the timer sub-irqs */
-
-	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
-	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
-	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
-	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
-	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
-
-	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
-		set_irq_chip(irq, &s3c_irq_timer);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
-		s5pc1xx_uart_irq(&uart_irqs[uart]);
-}
-
-
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
deleted file mode 100644
index b436d44..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ /dev/null
@@ -1,1144 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_vclk_54m	clk_54m
-
-struct clk_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-struct clksrc_clk {
-	struct clk		clk;
-	unsigned int		mask;
-	unsigned int		shift;
-
-	struct clk_sources	*sources;
-
-	unsigned int		divider_shift;
-	void __iomem		*reg_divider;
-	void __iomem		*reg_source;
-};
-
-/* APLL */
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_APLL_MASK,
-	.sources	= &clk_src_apll,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
-	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
-	.name		= "dout_apll",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll_get_rate,
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
-	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return rate;
-
-	div = (parent / rate) - 1;
-	if (div > S5PC100_CLKDIV0_ARM_MASK)
-		div = S5PC100_CLKDIV0_ARM_MASK;
-
-	return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S5PC100_CLKDIV0);
-	val &= S5PC100_CLKDIV0_ARM_MASK;
-	val |= (div - 1);
-	__raw_writel(val, S5PC100_CLKDIV0);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_dout_apll,
-	.get_rate	= s5pc100_clk_arm_get_rate,
-	.set_rate	= s5pc100_clk_arm_set_rate,
-	.round_rate	= s5pc100_clk_arm_round_rate,
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
-	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
-	.name		= "dout_d0_bus",
-	.id		= -1,
-	.parent		= &clk_arm,
-	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
-	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
-	.name		= "dout_pclkd0",
-	.id		= -1,
-	.parent		= &clk_dout_d0_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
-	.name		= "dout_apll2",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
-	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-static struct clk *clkset_am_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_dout_apll2,
-};
-
-static struct clk_sources clk_src_am = {
-	.sources	= clkset_am_list,
-	.nr_sources	= ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
-	.clk = {
-		.name		= "mout_am",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
-	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
-	.sources	= &clk_src_am,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
-	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
-	.name		= "dout_d1_bus",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
-};
-
-static struct clk *clkset_onenand_list[] = {
-	[0] = &clk_dout_d0_bus,
-	[1] = &clk_dout_d1_bus,
-};
-
-static struct clk_sources clk_src_onenand = {
-	.sources	= clkset_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
-	.clk = {
-		.name		= "mout_onenand",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
-	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
-	.sources	= &clk_src_onenand,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
-	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
-	.name		= "dout_pclkd1",
-	.id		= -1,
-	.parent		= &clk_dout_d1_bus,
-	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
-	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
-	.name		= "dout_cam",
-	.id		= -1,
-	.parent		= &clk_dout_mpll2,
-	.get_rate	= s5pc100_clk_dout_cam_get_rate,
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
-	.name		= "fout_epll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clk_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
-	.sources	= &clk_src_epll,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
-	.name		= "fout_hpll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
-	[0] = &clk_27m,
-	[1] = &clk_fout_hpll,
-};
-
-static struct clk_sources clk_src_hpll = {
-	.sources	= clk_src_hpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
-	.clk	= {
-		.name		= "mout_hpll",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
-	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
-	.sources	= &clk_src_hpll,
-	.reg_source	= S5PC100_CLKSRC0,
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_divider);
-
-	clkdiv >>= sclk->divider_shift;
-	clkdiv &= 0xf;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_divider;
-	unsigned int div;
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > 16)
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->divider_shift);
-	val |= (div - 1) << sclk->divider_shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clk_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(sclk->reg_source);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clksrc &= ~sclk->mask;
-		clksrc |= src_nr << sclk->shift;
-
-		__raw_writel(clksrc, sclk->reg_source);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		rate = parent_rate;
-	else {
-		div = rate / parent_rate;
-
-		if (div == 0)
-			div = 1;
-		if (div > 16)
-			div = 16;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-static struct clk *clkset_spi_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll2,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_spi = {
-	.sources	= clkset_spi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clksrc_clk clk_spi0 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi1 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clksrc_clk clk_spi2 = {
-	.clk	= {
-		.name		= "spi_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
-	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
-	.sources	= &clkset_spi,
-	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UART_MASK,
-	.sources	= &clkset_uart,
-	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd2 = {
-	.name		= "iis_cdclk2",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd0 = {
-	.name		= "pcm_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd1 = {
-	.name		= "pcm_cdclk1",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd0,
-	&clk_pcm_cd0,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clksrc_clk clk_audio0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
-	.sources	= &clkset_audio0,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
-static struct clk *clkset_audio1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd1,
-	&clk_pcm_cd1,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clksrc_clk clk_audio1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
-	.sources	= &clkset_audio1,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
-static struct clk *clkset_audio2_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd2,
-	&clk_mout_hpll.clk,
-};
-
-static struct clk_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clk_audio2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
-	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
-	.sources	= &clkset_audio2,
-	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV4,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
-static struct clk *clkset_spdif_list[] = {
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
-};
-
-static struct clk_sources clkset_spdif = {
-	.sources	= clkset_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clksrc_clk clk_spdif = {
-	.clk	= {
-		.name		= "spdif",
-		.id		= -1,
-	},
-	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
-	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
-	.sources	= &clkset_spdif,
-	.reg_source	= S5PC100_CLKSRC3,
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_vclk_54m,
-};
-
-static struct clk_sources clkset_lcd_fimc = {
-	.sources	= clkset_lcd_fimc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clksrc_clk clk_lcd = {
-	.clk	= {
-		.name		= "lcd",
-		.id		= -1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
-	.mask		= S5PC100_CLKSRC2_LCD_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc0 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc1 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_fimc2 = {
-	.clk	= {
-		.name		= "fimc",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
-		.enable		= s5pc100_sclk1_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
-	.sources	= &clkset_lcd_fimc,
-	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clk *clkset_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk ,
-};
-
-static struct clk_sources clkset_mmc = {
-	.sources	= clkset_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clksrc_clk clk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 0,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 1,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-static struct clksrc_clk clk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.id		= 2,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
-	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
-	.sources	= &clkset_mmc,
-	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV3,
-	.reg_source	= S5PC100_CLKSRC2,
-};
-
-
-static struct clk *clkset_usbhost_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_48m,
-};
-
-static struct clk_sources clkset_usbhost = {
-	.sources	= clkset_usbhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clk_usbhost = {
-	.clk	= {
-		.name		= "usbhost",
-		.id		= -1,
-		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
-		.enable		= s5pc100_sclk0_ctrl,
-		.set_parent	= s5pc100_setparent_clksrc,
-		.get_rate	= s5pc100_getrate_clksrc,
-		.set_rate	= s5pc100_setrate_clksrc,
-		.round_rate	= s5pc100_roundrate_clksrc,
-	},
-	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
-	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
-	.sources	= &clkset_usbhost,
-	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
-	.reg_divider	= S5PC100_CLKDIV2,
-	.reg_source	= S5PC100_CLKSRC1,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_mpll,
-	&clk_mout_am,
-	&clk_mout_onenand,
-	&clk_mout_epll,
-	&clk_mout_hpll,
-	&clk_spi0,
-	&clk_spi1,
-	&clk_spi2,
-	&clk_uart_uclk1,
-	&clk_audio0,
-	&clk_audio1,
-	&clk_audio2,
-	&clk_spdif,
-	&clk_lcd,
-	&clk_fimc0,
-	&clk_fimc1,
-	&clk_fimc2,
-	&clk_mmc0,
-	&clk_mmc1,
-	&clk_mmc2,
-	&clk_usbhost,
-};
-
-static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
-{
-	struct clk_sources *srcs = clk->sources;
-	u32 clksrc = __raw_readl(clk->reg_source);
-
-	clksrc &= clk->mask;
-	clksrc >>= clk->shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
-		clk->clk.name, clk->clk.parent->name, clksrc,
-		print_mhz(clk_get_rate(&clk->clk)));
-}
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long hclkd0;
-	unsigned long hclk;
-	unsigned long pclkd0;
-	unsigned long pclk;
-	unsigned long apll, mpll, epll, hpll;
-	unsigned int ptr;
-	u32 clkdiv0, clkdiv1;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
-	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
-	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
-	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
-		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
-		print_mhz(apll), print_mhz(mpll),
-		print_mhz(epll), print_mhz(hpll));
-
-	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
-	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
-	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
-	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
-	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
-	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
-		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
-		" PCLK=%ld.%03ld MHz\n",
-		print_mhz(armclk), print_mhz(hclkd0),
-		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_hpll.rate = hpll;
-
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = armclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc100_set_clksrc(init_parents[ptr]);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_mout_apll.clk,
-	&clk_dout_apll,
-	&clk_dout_d0_bus,
-	&clk_dout_pclkd0,
-	&clk_dout_apll2,
-	&clk_mout_mpll.clk,
-	&clk_mout_am.clk,
-	&clk_dout_d1_bus,
-	&clk_mout_onenand.clk,
-	&clk_dout_pclkd1,
-	&clk_dout_mpll2,
-	&clk_dout_cam,
-	&clk_dout_mpll,
-	&clk_mout_epll.clk,
-	&clk_fout_epll,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iis_cd2,
-	&clk_pcm_cd0,
-	&clk_pcm_cd1,
-	&clk_spi0.clk,
-	&clk_spi1.clk,
-	&clk_spi2.clk,
-	&clk_uart_uclk1.clk,
-	&clk_audio0.clk,
-	&clk_audio1.clk,
-	&clk_audio2.clk,
-	&clk_spdif.clk,
-	&clk_lcd.clk,
-	&clk_fimc0.clk,
-	&clk_fimc1.clk,
-	&clk_fimc2.clk,
-	&clk_mmc0.clk,
-	&clk_mmc1.clk,
-	&clk_mmc2.clk,
-	&clk_usbhost.clk,
-	&clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
deleted file mode 100644
index c587108..0000000
--- a/arch/arm/plat-s5pc1xx/s5pc100-init.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
-	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
deleted file mode 100644
index 1a63768..0000000
--- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC1XX setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-#define DISR_OFFSET	0x7008
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
deleted file mode 100644
index 5e4a7c3..0000000
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
deleted file mode 100644
index a0a8b4a..0000000
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
deleted file mode 100644
index 185c894..0000000
--- a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-	unsigned int num;
-
-	num = width;
-	/* In case of 8 width, we should decrease the 2 */
-	if (width == 8)
-		num = width - 2;
-
-	end = S5PC100_GPG0(2 + num);
-
-	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	if (width == 8) {
-		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG2(2 + width);
-
-	/* Set all the necessary GPG2 pins to special-function 2 */
-	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG3(2 + width);
-
-	/* Set all the necessary GPG3 pins to special-function 2 */
-	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
-}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 486a0d6..2753fb3 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,12 +6,291 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+	select NO_IOPORT
 	default y
 	help
 	  Base platform code for all Samsung SoC based systems
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+	bool "S3C Initialisation watchdog"
+	depends on S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+	bool "S3C Reboot on decompression error"
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+# clock options
+
+config SAMSUNG_CLKSRC
+	bool
+	help
+	  Select the clock code for the clksrc implementation
+	  used by newer systems such as the S3C64XX.
+
+# options for IRQ support
+
+config SAMSUNG_IRQ_VIC_TIMER
+       bool
+       help
+         Internal configuration to build the VIC timer interrupt code.
+
+config SAMSUNG_IRQ_UART
+       bool
+       help
+         Internal configuration to build the IRQ UART demux code.
+
+# options for gpio configuration support
+
+config SAMSUNG_GPIOLIB_4BIT
+	bool
+	help
+	  GPIOlib file contains the 4 bit modification functions for gpio
+	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
+	  series of processors.
+
+config S3C_GPIO_CFG_S3C24XX
+	bool
+	help
+	  Internal configuration to enable S3C24XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_CFG_S3C64XX
+	bool
+	help
+	  Internal configuration to enable S3C64XX style GPIO configuration
+	  functions.
+
+config S3C_GPIO_PULL_UPDOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_DOWN
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S3C_GPIO_PULL_UP
+	bool
+	help
+	  Internal configuration to enable the correct GPIO pull helper
+
+config S5P_GPIO_DRVSTR
+	bool
+	help
+	  Internal configuration to get and set correct GPIO driver strength
+	  helper
+
+config SAMSUNG_GPIO_EXTRA
+	int "Number of additional GPIO pins"
+	default 0
+	help
+	  Use additional GPIO space in addition to the GPIO's the SOC
+	  provides. This allows expanding the GPIO space for use with
+	  GPIO expanders.
+
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
+# ADC driver
+
+config S3C_ADC
+	bool "ADC common driver support"
+	help
+	  Core support for the ADC block found in the Samsung SoC systems
+	  for drivers such as the touchscreen and hwmon to use to share
+	  this resource.
+
+# device definitions to compile in
+
+config S3C_DEV_HSMMC
+	bool
+	help
+	  Compile in platform device definitions for HSMMC code
+
+config S3C_DEV_HSMMC1
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
+config S3C_DEV_HWMON
+	bool
+	help
+	    Compile in platform device definitions for HWMON
+
+config S3C_DEV_I2C1
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 1
+
+config S3C_DEV_I2C2
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 2
+
+config S3C_DEV_FB
+	bool
+	help
+	  Compile in platform device definition for framebuffer
+
+config S3C_DEV_USB_HOST
+	bool
+	help
+	  Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+	bool
+	help
+	  Compile in platform device definition for USB high-speed OtG
+
+config S3C_DEV_WDT
+	bool
+	default y if ARCH_S3C2410
+	help
+	  Complie in platform device definition for Watchdog Timer
+
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
+config S3C_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+	bool
+	help
+	  Complie in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+	bool
+	help
+	  Compile in platform device definition for ADC controller
+
+config S3C64XX_DEV_SPI
+	bool
+	help
+	  Compile in platform device definitions for S3C64XX's type
+	  SPI controllers.
+
+config SAMSUNG_DEV_TS
+	bool
+	help
+	    Common in platform device definitions for touchscreen device
+
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
+config S3C_PL330_DMA
+	bool
+	select PL330
+	help
+	  S3C DMA API Driver for PL330 DMAC.
+
+comment "Power management"
+
+config SAMSUNG_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+       bool "SMDK LED suspend/resume debugging"
+       depends on PM && (MACH_SMDK6410)
+       help
+         Say Y here to enable the use of the SMDK LEDs on the baseboard
+	 for debugging of the state of the suspend and resume process.
+
+	 Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on PM && CRC32
+	help
+	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on PM && SAMSUNG_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config SAMSUNG_WAKEMASK
+	bool
+	depends on PM
+	help
+	  Compile support for wakeup-mask controls found on the S3C6400
+	  and above. This code allows a set of interrupt to wakeup-mask
+	  mappings. See <plat/wakeup-mask.h>
 
 endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4478b9f..b1d82cc 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -9,3 +9,60 @@ obj-m				:=
 obj-n				:= dummy.o
 obj-				:=
 
+# Objects we always build independent of SoC choice
+
+obj-y				+= init.o
+obj-y				+= time.o
+obj-y				+= clock.o
+obj-y				+= pwm-clock.o
+obj-y				+= gpio.o
+obj-y				+= gpio-config.o
+
+obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
+obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
+
+obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
+obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+
+# ADC
+
+obj-$(CONFIG_S3C_ADC)	+= adc.o
+
+# devices
+
+obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
+obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
+obj-y				+= dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
+obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
+obj-y				+= dev-uart.o
+obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_WDT)	+= dev-wdt.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
+obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
+
+obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
+
+# DMA support
+
+obj-$(CONFIG_S3C_DMA)		+= dma.o
+
+obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+
+# PM support
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
+
+obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
+
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
new file mode 100644
index 0000000..04d9521
--- /dev/null
+++ b/arch/arm/plat-samsung/adc.c
@@ -0,0 +1,489 @@
+/* arch/arm/plat-samsung/adc.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * Samsung ADC device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+/* This driver is designed to control the usage of the ADC block between
+ * the touchscreen and any other drivers that may need to use it, such as
+ * the hwmon driver.
+ *
+ * Priority will be given to the touchscreen driver, but as this itself is
+ * rate limited it should not starve other requests which are processed in
+ * order that they are received.
+ *
+ * Each user registers to get a client block which uniquely identifies it
+ * and stores information such as the necessary functions to callback when
+ * action is required.
+ */
+
+enum s3c_cpu_type {
+	TYPE_S3C24XX,
+	TYPE_S3C64XX
+};
+
+struct s3c_adc_client {
+	struct platform_device	*pdev;
+	struct list_head	 pend;
+	wait_queue_head_t	*wait;
+
+	unsigned int		 nr_samples;
+	int			 result;
+	unsigned char		 is_ts;
+	unsigned char		 channel;
+
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
+			      unsigned *samples_left);
+};
+
+struct adc_device {
+	struct platform_device	*pdev;
+	struct platform_device	*owner;
+	struct clk		*clk;
+	struct s3c_adc_client	*cur;
+	struct s3c_adc_client	*ts_pend;
+	void __iomem		*regs;
+	spinlock_t		 lock;
+
+	unsigned int		 prescale;
+
+	int			 irq;
+};
+
+static struct adc_device *adc_dev;
+
+static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
+
+#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+
+static inline void s3c_adc_convert(struct adc_device *adc)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	con |= S3C2410_ADCCON_ENABLE_START;
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static inline void s3c_adc_select(struct adc_device *adc,
+				  struct s3c_adc_client *client)
+{
+	unsigned con = readl(adc->regs + S3C2410_ADCCON);
+
+	client->select_cb(client, 1);
+
+	con &= ~S3C2410_ADCCON_MUXMASK;
+	con &= ~S3C2410_ADCCON_STDBM;
+	con &= ~S3C2410_ADCCON_STARTMASK;
+
+	if (!client->is_ts)
+		con |= S3C2410_ADCCON_SELMUX(client->channel);
+
+	writel(con, adc->regs + S3C2410_ADCCON);
+}
+
+static void s3c_adc_dbgshow(struct adc_device *adc)
+{
+	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
+		readl(adc->regs + S3C2410_ADCCON),
+		readl(adc->regs + S3C2410_ADCTSC),
+		readl(adc->regs + S3C2410_ADCDLY));
+}
+
+static void s3c_adc_try(struct adc_device *adc)
+{
+	struct s3c_adc_client *next = adc->ts_pend;
+
+	if (!next && !list_empty(&adc_pending)) {
+		next = list_first_entry(&adc_pending,
+					struct s3c_adc_client, pend);
+		list_del(&next->pend);
+	} else
+		adc->ts_pend = NULL;
+
+	if (next) {
+		adc_dbg(adc, "new client is %p\n", next);
+		adc->cur = next;
+		s3c_adc_select(adc, next);
+		s3c_adc_convert(adc);
+		s3c_adc_dbgshow(adc);
+	}
+}
+
+int s3c_adc_start(struct s3c_adc_client *client,
+		  unsigned int channel, unsigned int nr_samples)
+{
+	struct adc_device *adc = adc_dev;
+	unsigned long flags;
+
+	if (!adc) {
+		printk(KERN_ERR "%s: failed to find adc\n", __func__);
+		return -EINVAL;
+	}
+
+	if (client->is_ts && adc->ts_pend)
+		return -EAGAIN;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	client->channel = channel;
+	client->nr_samples = nr_samples;
+
+	if (client->is_ts)
+		adc->ts_pend = client;
+	else
+		list_add_tail(&client->pend, &adc_pending);
+
+	if (!adc->cur)
+		s3c_adc_try(adc);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_start);
+
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_read);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
+{
+}
+
+struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
+						     unsigned *samples_left),
+					unsigned int is_ts)
+{
+	struct s3c_adc_client *client;
+
+	WARN_ON(!pdev);
+
+	if (!select)
+		select = s3c_adc_default_select;
+
+	if (!pdev)
+		return ERR_PTR(-EINVAL);
+
+	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
+	if (!client) {
+		dev_err(&pdev->dev, "no memory for adc client\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	client->pdev = pdev;
+	client->is_ts = is_ts;
+	client->select_cb = select;
+	client->convert_cb = conv;
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_register);
+
+void s3c_adc_release(struct s3c_adc_client *client)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc_dev->lock, flags);
+
+	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
+
+	spin_unlock_irqrestore(&adc_dev->lock, flags);
+	kfree(client);
+}
+EXPORT_SYMBOL_GPL(s3c_adc_release);
+
+static irqreturn_t s3c_adc_irq(int irq, void *pw)
+{
+	struct adc_device *adc = pw;
+	struct s3c_adc_client *client = adc->cur;
+	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
+	unsigned data0, data1;
+
+	if (!client) {
+		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
+		goto exit;
+	}
+
+	data0 = readl(adc->regs + S3C2410_ADCDAT0);
+	data1 = readl(adc->regs + S3C2410_ADCDAT1);
+	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
+
+	client->nr_samples--;
+
+	if (cpu == TYPE_S3C64XX) {
+		/* S3C64XX ADC resolution is 12-bit */
+		data0 &= 0xfff;
+		data1 &= 0xfff;
+	} else {
+		data0 &= 0x3ff;
+		data1 &= 0x3ff;
+	}
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0, data1, &client->nr_samples);
+
+	if (client->nr_samples > 0) {
+		/* fire another conversion for this */
+
+		client->select_cb(client, 1);
+		s3c_adc_convert(adc);
+	} else {
+		spin_lock(&adc->lock);
+		(client->select_cb)(client, 0);
+		adc->cur = NULL;
+
+		s3c_adc_try(adc);
+		spin_unlock(&adc->lock);
+	}
+
+exit:
+	if (cpu == TYPE_S3C64XX) {
+		/* Clear ADC interrupt */
+		writel(0, adc->regs + S3C64XX_ADCCLRINT);
+	}
+	return IRQ_HANDLED;
+}
+
+static int s3c_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_device *adc;
+	struct resource *regs;
+	int ret;
+	unsigned tmp;
+
+	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
+	if (adc == NULL) {
+		dev_err(dev, "failed to allocate adc_device\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&adc->lock);
+
+	adc->pdev = pdev;
+	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+
+	adc->irq = platform_get_irq(pdev, 1);
+	if (adc->irq <= 0) {
+		dev_err(dev, "failed to get adc irq\n");
+		ret = -ENOENT;
+		goto err_alloc;
+	}
+
+	ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach adc irq\n");
+		goto err_alloc;
+	}
+
+	adc->clk = clk_get(dev, "adc");
+	if (IS_ERR(adc->clk)) {
+		dev_err(dev, "failed to get adc clock\n");
+		ret = PTR_ERR(adc->clk);
+		goto err_irq;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "failed to find registers\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+
+	adc->regs = ioremap(regs->start, resource_size(regs));
+	if (!adc->regs) {
+		dev_err(dev, "failed to map registers\n");
+		ret = -ENXIO;
+		goto err_clk;
+	}
+
+	clk_enable(adc->clk);
+
+	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+	if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+		/* Enable 12-bit ADC resolution */
+		tmp |= S3C64XX_ADCCON_RESSEL;
+	}
+	writel(tmp, adc->regs + S3C2410_ADCCON);
+
+	dev_info(dev, "attached adc driver\n");
+
+	platform_set_drvdata(pdev, adc);
+	adc_dev = adc;
+
+	return 0;
+
+ err_clk:
+	clk_put(adc->clk);
+
+ err_irq:
+	free_irq(adc->irq, adc);
+
+ err_alloc:
+	kfree(adc);
+	return ret;
+}
+
+static int __devexit s3c_adc_remove(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+
+	iounmap(adc->regs);
+	free_irq(adc->irq, adc);
+	clk_disable(adc->clk);
+	clk_put(adc->clk);
+	kfree(adc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	unsigned long flags;
+	u32 con;
+
+	spin_lock_irqsave(&adc->lock, flags);
+
+	con = readl(adc->regs + S3C2410_ADCCON);
+	con |= S3C2410_ADCCON_STDBM;
+	writel(con, adc->regs + S3C2410_ADCCON);
+
+	disable_irq(adc->irq);
+	spin_unlock_irqrestore(&adc->lock, flags);
+	clk_disable(adc->clk);
+
+	return 0;
+}
+
+static int s3c_adc_resume(struct platform_device *pdev)
+{
+	struct adc_device *adc = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	clk_enable(adc->clk);
+	enable_irq(adc->irq);
+
+	writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
+	       adc->regs + S3C2410_ADCCON);
+
+	return 0;
+}
+
+#else
+#define s3c_adc_suspend NULL
+#define s3c_adc_resume NULL
+#endif
+
+static struct platform_device_id s3c_adc_driver_ids[] = {
+	{
+		.name           = "s3c24xx-adc",
+		.driver_data    = TYPE_S3C24XX,
+	}, {
+		.name           = "s3c64xx-adc",
+		.driver_data    = TYPE_S3C64XX,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
+
+static struct platform_driver s3c_adc_driver = {
+	.id_table	= s3c_adc_driver_ids,
+	.driver		= {
+		.name	= "s3c-adc",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_adc_probe,
+	.remove		= __devexit_p(s3c_adc_remove),
+	.suspend	= s3c_adc_suspend,
+	.resume		= s3c_adc_resume,
+};
+
+static int __init adc_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&s3c_adc_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(adc_init);
diff --git a/arch/arm/plat-samsung/clock-clksrc.c b/arch/arm/plat-samsung/clock-clksrc.c
new file mode 100644
index 0000000..ae8b850
--- /dev/null
+++ b/arch/arm/plat-samsung/clock-clksrc.c
@@ -0,0 +1,212 @@
+/* linux/arch/arm/plat-samsung/clock-clksrc.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu-freq.h>
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static inline u32 bit_mask(u32 shift, u32 nr_bits)
+{
+	u32 mask = 0xffffffff >> (32 - nr_bits);
+
+	return mask << shift;
+}
+
+static unsigned long s3c_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+
+	clkdiv &= mask;
+	clkdiv >>= sclk->reg_div.shift;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_div.reg;
+	unsigned int div;
+	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > (1 << sclk->reg_div.size))
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~mask;
+	val |= (div - 1) << sclk->reg_div.shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clksrc_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_src.reg);
+	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clk->parent = parent;
+
+		clksrc &= ~mask;
+		clksrc |= src_nr << sclk->reg_src.shift;
+
+		__raw_writel(clksrc, sclk->reg_src.reg);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s3c_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int max_div = 1 << sclk->reg_div.size;
+	int div;
+
+	if (rate >= parent_rate)
+		rate = parent_rate;
+	else {
+		div = parent_rate / rate;
+		if (parent_rate % rate)
+			div++;
+
+		if (div == 0)
+			div = 1;
+		if (div > max_div)
+			div = max_div;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+/* Clock initialisation code */
+
+void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
+{
+	struct clksrc_sources *srcs = clk->sources;
+	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
+	u32 clksrc;
+
+	if (!clk->reg_src.reg) {
+		if (!clk->clk.parent)
+			printk(KERN_ERR "%s: no parent clock specified\n",
+				clk->clk.name);
+		return;
+	}
+
+	clksrc = __raw_readl(clk->reg_src.reg);
+	clksrc &= mask;
+	clksrc >>= clk->reg_src.shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	if (announce)
+		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+		       clk->clk.name, clk->clk.parent->name, clksrc,
+		       clk_get_rate(&clk->clk));
+}
+
+static struct clk_ops clksrc_ops = {
+	.set_parent	= s3c_setparent_clksrc,
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nodiv = {
+	.set_parent	= s3c_setparent_clksrc,
+};
+
+static struct clk_ops clksrc_ops_nosrc = {
+	.get_rate	= s3c_getrate_clksrc,
+	.set_rate	= s3c_setrate_clksrc,
+	.round_rate	= s3c_roundrate_clksrc,
+};
+
+void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
+{
+	int ret;
+
+	for (; size > 0; size--, clksrc++) {
+		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
+			printk(KERN_ERR "%s: clock %s has no registers set\n",
+			       __func__, clksrc->clk.name);
+
+		/* fill in the default functions */
+
+		if (!clksrc->clk.ops) {
+			if (!clksrc->reg_div.reg)
+				clksrc->clk.ops = &clksrc_ops_nodiv;
+			else if (!clksrc->reg_src.reg)
+				clksrc->clk.ops = &clksrc_ops_nosrc;
+			else
+				clksrc->clk.ops = &clksrc_ops;
+		}
+
+		/* setup the clocksource, but do not announce it
+		 * as it may be re-set by the setup routines
+		 * called after the rest of the clocks have been
+		 * registered
+		 */
+		s3c_set_clksrc(clksrc, false);
+
+		ret = s3c24xx_register_clock(&clksrc->clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: failed to register %s (%d)\n",
+			       __func__, clksrc->clk.name, ret);
+		}
+	}
+}
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
new file mode 100644
index 0000000..8bf79f3
--- /dev/null
+++ b/arch/arm/plat-samsung/clock.c
@@ -0,0 +1,424 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+/* We originally used an mutex here, but some contexts (see resume)
+ * are calling functions such as clk_set_parent() with IRQs disabled
+ * causing an BUG to be triggered.
+ */
+DEFINE_SPINLOCK(clocks_lock);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p;
+	struct clk *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	spin_lock(&clocks_lock);
+
+	list_for_each_entry(p, &clocks, list) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 &&
+		    try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
+	/* check for the case where a device was supplied, but the
+	 * clock that was being searched for is not device specific */
+
+	if (IS_ERR(clk)) {
+		list_for_each_entry(p, &clocks, list) {
+			if (p->id == -1 && strcmp(id, p->name) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				break;
+			}
+		}
+	}
+
+	spin_unlock(&clocks_lock);
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	spin_lock(&clocks_lock);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	spin_unlock(&clocks_lock);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	spin_lock(&clocks_lock);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	spin_unlock(&clocks_lock);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->ops != NULL && clk->ops->get_rate != NULL)
+		return (clk->ops->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
+		return (clk->ops->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	/* We do not default just do a clk->rate = rate as
+	 * the clock may have been made this way by choice.
+	 */
+
+	WARN_ON(clk->ops == NULL);
+	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
+
+	if (clk->ops == NULL || clk->ops->set_rate == NULL)
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+	ret = (clk->ops->set_rate)(clk, rate);
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = 0;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock(&clocks_lock);
+
+	if (clk->ops && clk->ops->set_parent)
+		ret = (clk->ops->set_parent)(clk, parent);
+
+	spin_unlock(&clocks_lock);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+struct clk_ops clk_ops_def_setrate = {
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_ext = {
+	.name		= "ext",
+	.id		= -1,
+};
+
+struct clk clk_epll = {
+	.name		= "epll",
+	.id		= -1,
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.id		= -1,
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.ops		= &clk_ops_def_setrate,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+	.id		= -1,
+};
+
+/* initialise the clock system */
+
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
+int s3c24xx_register_clock(struct clk *clk)
+{
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* add to the list of available clocks */
+
+	/* Quick check to see if this clock has already been registered. */
+	BUG_ON(clk->list.prev != clk->list.next);
+
+	spin_lock(&clocks_lock);
+	list_add(&clk->list, &clocks);
+	spin_unlock(&clocks_lock);
+
+	return 0;
+}
+
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
+int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
+{
+	int fails = 0;
+
+	for (; nr_clks > 0; nr_clks--, clks++) {
+		if (s3c24xx_register_clock(*clks) < 0) {
+			struct clk *clk = *clks;
+			printk(KERN_ERR "%s: failed to register %p: %s\n",
+			       __func__, clk, clk->name);
+			fails++;
+		}
+	}
+
+	return fails;
+}
+
+/**
+ * s3c_register_clocks() - register an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * Call s3c24xx_register_clock() on the @clkp array given, printing an
+ * error if it fails to register the clock (unlikely).
+ */
+void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
+{
+	int ret;
+
+	for (; nr_clks > 0; nr_clks--, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+}
+
+/**
+ * s3c_disable_clocks() - disable an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * for internal use only at initialisation time. disable the clocks in the
+ * @clkp array.
+ */
+
+void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
+{
+	for (; nr_clks > 0; nr_clks--, clkp++)
+		(clkp->enable)(clkp, 0);
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_register_baseclocks(unsigned long xtal)
+{
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
+
+	clk_xtal.rate = xtal;
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
+
diff --git a/arch/arm/plat-samsung/dev-adc.c b/arch/arm/plat-samsung/dev-adc.c
new file mode 100644
index 0000000..9d903d4
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-adc.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-samsung/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = SAMSUNG_PA_ADC,
+		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "samsung-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c
new file mode 100644
index 0000000..bf60204
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-fb.c
@@ -0,0 +1,73 @@
+/* linux/arch/arm/plat-s3c/dev-fb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for framebuffer device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/gfp.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/fb.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_fb_resource[] = {
+	[0] = {
+		.start = S3C_PA_FB,
+		.end   = S3C_PA_FB + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_LCD_VSYNC,
+		.end   = IRQ_LCD_VSYNC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_LCD_FIFO,
+		.end   = IRQ_LCD_FIFO,
+		.flags = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start = IRQ_LCD_SYSTEM,
+		.end   = IRQ_LCD_SYSTEM,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_fb = {
+	.name		  = "s3c-fb",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_fb_resource),
+	.resource	  = s3c_fb_resource,
+	.dev.dma_mask	  = &s3c_device_fb.dev.coherent_dma_mask,
+	.dev.coherent_dma_mask = 0xffffffffUL,
+};
+
+void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
+{
+	struct s3c_fb_platdata *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_fb.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39..4c05b39 100644
--- a/arch/arm/plat-s3c/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4c..e49bc4c 100644
--- a/arch/arm/plat-s3c/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580b..824580b 100644
--- a/arch/arm/plat-s3c/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c
new file mode 100644
index 0000000..b3ffb95
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-hwmon.c
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-samsung/dev-hwmon.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Adapted for HWMON by Maurus Cuelenaere
+ *
+ * Samsung series device definition for HWMON
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+#include <plat/hwmon.h>
+
+struct platform_device s3c_device_hwmon = {
+	.name		= "s3c-hwmon",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+	struct s3c_hwmon_pdata *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_hwmon.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
new file mode 100644
index 0000000..3a601c1
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c0.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/plat-s3c/dev-i2c0.c
+ *
+ * Copyright 2008-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC,
+		.end   = S3C_PA_IIC + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC,
+		.end   = IRQ_IIC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c0 = {
+	.name		  = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+	.id		  = 0,
+#else
+	.id		  = -1,
+#endif
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data0;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
+
+	s3c_device_i2c0.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
new file mode 100644
index 0000000..858ee2a
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c1.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC1,
+		.end   = S3C_PA_IIC1 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_IIC1,
+		.end   = IRQ_IIC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c1 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data1;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+	s3c_device_i2c1.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
new file mode 100644
index 0000000..07036de
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c2.c
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c/dev-i2c2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C series device definition for i2c device 2
+ *
+ * Based on plat-samsung/dev-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC2,
+		.end   = S3C_PA_IIC2 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CAN0,
+		.end   = IRQ_CAN0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c2 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data2;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+
+	s3c_device_i2c2.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
new file mode 100644
index 0000000..3a7b889
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-nand.c
@@ -0,0 +1,130 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+#include <plat/nand.h>
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C_PA_NAND,
+		.end   = S3C_PA_NAND + SZ_1M,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+
+	s3c_device_nand.dev.platform_data = npd;
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c
new file mode 100644
index 0000000..45ec732
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-onenand.c
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-onenand.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX/S5PC100 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c_onenand_resources[] = {
+	[0] = {
+		.start	= S3C_PA_ONENAND,
+		.end	= S3C_PA_ONENAND + 0x400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C_PA_ONENAND_BUF,
+		.end	= S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_ONENAND,
+		.end	= IRQ_ONENAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_onenand = {
+	.name		= "samsung-onenand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
+	.resource	= s3c_onenand_resources,
+};
+
+void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s3c_device_onenand.dev.platform_data = pd;
+}
diff --git a/arch/arm/plat-samsung/dev-rtc.c b/arch/arm/plat-samsung/dev-rtc.c
new file mode 100644
index 0000000..bf4e226
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-rtc.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-samsung/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start	= S3C_PA_RTC,
+		.end	= S3C_PA_RTC + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_RTC_TIC,
+		.end	= IRQ_RTC_TIC,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c64xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
new file mode 100644
index 0000000..236ef84
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -0,0 +1,61 @@
+/* linux/arch/arm/mach-s3c64xx/dev-ts.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * Adapted by Maurus Cuelenaere for s3c64xx
+ *
+ * S3C64XX series device definition for touchscreen device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/ts.h>
+
+static struct resource s3c_ts_resource[] = {
+	[0] = {
+		.start = SAMSUNG_PA_ADC,
+		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c64xx-ts",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+	struct s3c2410_ts_mach_info *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ts.dev.platform_data = npd;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff --git a/arch/arm/plat-samsung/dev-uart.c b/arch/arm/plat-samsung/dev-uart.c
new file mode 100644
index 0000000..3776cd9
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-uart.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-uart.c
+ *	originally from arch/arm/plat-s3c24xx/devs.c
+ *x
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Base S3C24XX platform device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
new file mode 100644
index 0000000..33a844a
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
@@ -0,0 +1,48 @@
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+	[0] = {
+		.start	= S3C_PA_USB_HSOTG,
+		.end	= S3C_PA_USB_HSOTG + 0x10000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_OTG,
+		.end	= IRQ_OTG,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c_device_usb_hsotg = {
+	.name		= "s3c-hsotg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
+	.resource	= s3c_usb_hsotg_resources,
+	.dev		= {
+		.dma_mask		= &s3c_hsotg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c
new file mode 100644
index 0000000..0e0a3bf
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-usb.c
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/usb-control.h>
+
+static struct resource s3c_usb_resource[] = {
+	[0] = {
+		.start = S3C_PA_USBHOST,
+		.end   = S3C_PA_USBHOST + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ohci = {
+	.name		  = "s3c2410-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_usb_resource),
+	.resource	  = s3c_usb_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_usb_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ohci);
+
+/**
+ * s3c_ohci_set_platdata - initialise OHCI device platform data
+ * @info: The platform data.
+ *
+ * This call copies the @info passed in and sets the device .platform_data
+ * field to that copy. The @info is copied so that the original can be marked
+ * __initdata.
+ */
+void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
+{
+	struct s3c2410_hcd_info *npd;
+
+	npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ohci.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
new file mode 100644
index 0000000..5efca87
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-wdt.c
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-samsung/dev-wdt.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C series device definition for the watchdog timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_wdt_resource[] = {
+	[0] = {
+		.start	= S3C_PA_WDT,
+		.end	= S3C_PA_WDT + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_WDT,
+		.end	= IRQ_WDT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s3c_device_wdt = {
+	.name		= "s3c2410-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
+	.resource	= s3c_wdt_resource,
+};
+EXPORT_SYMBOL(s3c_device_wdt);
diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c
new file mode 100644
index 0000000..cb459dd
--- /dev/null
+++ b/arch/arm/plat-samsung/dma.c
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/dma.c
+ *
+ * Copyright (c) 2003-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	chan->flags = flags;
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
new file mode 100644
index 0000000..57b68a5
--- /dev/null
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c/gpio-config.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO configuration core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	s3c_gpio_lock(chip, flags);
+	ret = s3c_gpio_do_setcfg(chip, offset, config);
+	s3c_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		s3c_gpio_lock(chip, flags);
+		ret = s3c_gpio_do_getcfg(chip, offset);
+		s3c_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+
+int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	s3c_gpio_lock(chip, flags);
+	ret = s3c_gpio_do_setpull(chip, offset, pull);
+	s3c_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
+int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+			      unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+				   unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+
+int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+			    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
+int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+				 unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+				      unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
+int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+			    unsigned int off, s3c_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+	return (__force s3c_gpio_pull_t)pup;
+}
+#endif
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup = __raw_readl(reg);
+
+	if (pup == S3C_GPIO_PULL_UP)
+		pup &= ~(1 << off);
+	else if (pup == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP */
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = chip->chip.base - pin;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = chip->chip.base - pin;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif	/* CONFIG_S5P_GPIO_DRVSTR */
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
new file mode 100644
index 0000000..b83a833
--- /dev/null
+++ b/arch/arm/plat-samsung/gpio.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/plat-s3c/gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+
+#include <plat/gpio-core.h>
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/* Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	s3c_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int s3c_gpiolib_output(struct gpio_chip *chip,
+			      unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	s3c_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	s3c_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static void s3c_gpiolib_set(struct gpio_chip *chip,
+			    unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	s3c_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	s3c_gpio_unlock(ourchip, flags);
+}
+
+static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = s3c_gpiolib_input;
+	if (!gc->direction_output)
+		gc->direction_output = s3c_gpiolib_output;
+	if (!gc->set)
+		gc->set = s3c_gpiolib_set;
+	if (!gc->get)
+		gc->get = s3c_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
new file mode 100644
index 0000000..8a8ba8b
--- /dev/null
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -0,0 +1,199 @@
+/* arch/arm/plat-samsung/gpiolib.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+*/
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/* The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
+ * store the 'base + 0x4' address so that these routines see the data
+ * register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
+
+void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		samsung_gpiolib_add_4bit2(chip);
+		s3c_gpiolib_add(chip);
+	}
+}
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
new file mode 100644
index 0000000..e8382c7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -0,0 +1,35 @@
+/* arch/arm/plat-samsung/include/plat/adc.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simnte.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C ADC driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_H
+#define __ASM_PLAT_ADC_H __FILE__
+
+struct s3c_adc_client;
+
+extern int s3c_adc_start(struct s3c_adc_client *client,
+			 unsigned int channel, unsigned int nr_samples);
+
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
+extern struct s3c_adc_client *
+	s3c_adc_register(struct platform_device *pdev,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
+				      unsigned *samples_left),
+			 unsigned int is_ts);
+
+extern void s3c_adc_release(struct s3c_adc_client *client);
+
+#endif /* __ASM_PLAT_ADC_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
new file mode 100644
index 0000000..e32f9ed
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -0,0 +1,25 @@
+/* arch/arm/plat-samsung/include/plat/audio.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD  0
+#define S3C64XX_AC97_GPE  1
+extern void s3c64xx_ac97_setup_gpio(int);
+
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+	int (*cfg_gpio)(struct platform_device *);
+};
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
new file mode 100644
index 0000000..50a8ca7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+ *
+ * Parts taken from arch/arm/plat-s3c64xx/clock.c
+ *	Copyright 2008 Openmoko, Inc.
+ *	Copyright 2008 Simtec Electronics
+ *		Ben Dooks <ben@simtec.co.uk>
+ *		http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Harald Welte
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct clksrc_sources - list of sources for a given clock
+ * @sources: array of pointers to clocks
+ * @nr_sources: The size of @sources
+ */
+struct clksrc_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+/**
+ * struct clksrc_reg - register definition for clock control bits
+ * @reg: pointer to the register in virtual memory.
+ * @shift: the shift in bits to where the bitfield is.
+ * @size: the size in bits of the bitfield.
+ *
+ * This specifies the size and position of the bits we are interested
+ * in within the register specified by @reg.
+ */
+struct clksrc_reg {
+	void __iomem		*reg;
+	unsigned short		shift;
+	unsigned short		size;
+};
+
+/**
+ * struct clksrc_clk - class of clock for newer style samsung devices.
+ * @clk: the standard clock representation
+ * @sources: the sources for this clock
+ * @reg_src: the register definition for selecting the clock's source
+ * @reg_div: the register definition for the clock's output divisor
+ *
+ * This clock implements the features required by the newer SoCs where
+ * the standard clock block provides an input mux and a post-mux divisor
+ * to provide the periperhal's clock.
+ *
+ * The array of @sources provides the mapping of mux position to the
+ * clock, and @reg_src shows the code where to modify to change the mux
+ * position. The @reg_div defines how to change the divider settings on
+ * the output.
+ */
+struct clksrc_clk {
+	struct clk		clk;
+	struct clksrc_sources	*sources;
+
+	struct clksrc_reg	reg_src;
+	struct clksrc_reg	reg_div;
+};
+
+/**
+ * s3c_set_clksrc() - setup the clock from the register settings
+ * @clk: The clock to setup.
+ * @announce: true to announce the setting to printk().
+ *
+ * Setup the clock from the current register settings, for when the
+ * kernel boots or if it is resuming from a possibly unknown state.
+ */
+extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
+
+/**
+ * s3c_register_clksrc() register clocks from an array of clksrc clocks
+ * @srcs: The array of clocks to register
+ * @size: The size of the @srcs array.
+ *
+ * Initialise and register the array of clocks described by @srcs.
+ */
+extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
new file mode 100644
index 0000000..0fbcd0e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/plat-s3c/include/plat/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/spinlock.h>
+
+struct clk;
+
+/**
+ * struct clk_ops - standard clock operations
+ * @set_rate: set the clock rate, see clk_set_rate().
+ * @get_rate: get the clock rate, see clk_get_rate().
+ * @round_rate: round a given clock rate, see clk_round_rate().
+ * @set_parent: set the clock's parent, see clk_set_parent().
+ *
+ * Group the common clock implementations together so that we
+ * don't have to keep setting the same fiels again. We leave
+ * enable in struct clk.
+ *
+ * Adding an extra layer of indirection into the process should
+ * not be a problem as it is unlikely these operations are going
+ * to need to be called quickly.
+ */
+struct clk_ops {
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+struct clk {
+	struct list_head      list;
+	struct module        *owner;
+	struct clk           *parent;
+	const char           *name;
+	int		      id;
+	int		      usage;
+	unsigned long         rate;
+	unsigned long         ctrlbit;
+
+	struct clk_ops		*ops;
+	int		    (*enable)(struct clk *, int enable);
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_epll;
+extern struct clk clk_xtal;
+extern struct clk clk_ext;
+
+/* S3C64XX specific clocks */
+extern struct clk clk_h2;
+extern struct clk clk_27m;
+extern struct clk clk_48m;
+extern struct clk clk_xusbxti;
+
+extern int clk_default_setrate(struct clk *clk, unsigned long rate);
+extern struct clk_ops clk_ops_def_setrate;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern spinlock_t clocks_lock;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
+
+extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
+
+extern int s3c24xx_register_baseclocks(unsigned long xtal);
+
+extern void s5p_register_clocks(unsigned long xtal_freq);
+
+extern void s3c24xx_setup_clocks(unsigned long fclk,
+				 unsigned long hclk,
+				 unsigned long pclk);
+
+extern void s3c2410_setup_clocks(void);
+extern void s3c2412_setup_clocks(void);
+extern void s3c244x_setup_clocks(void);
+extern void s3c2443_setup_clocks(void);
+
+/* S3C64XX specific functions and clocks */
+
+extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
+
+/* Init for pwm clock code */
+
+extern void s3c_pwmclk_init(void);
+
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
new file mode 100644
index 0000000..80c4a80
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -0,0 +1,145 @@
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006-2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - driver and board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/cpufreq.h>
+
+struct s3c_cpufreq_info;
+struct s3c_cpufreq_board;
+struct s3c_iotimings;
+
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
+struct s3c_freq {
+	unsigned long	fclk;
+	unsigned long	armclk;
+	unsigned long	hclk_tns;	/* in 10ths of ns */
+	unsigned long	hclk;
+	unsigned long	pclk;
+};
+
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+ * notification can use this information that is not provided by just
+ * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
+ */
+struct s3c_cpufreq_freqs {
+	struct cpufreq_freqs	freqs;
+	struct s3c_freq		old;
+	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
+};
+
+#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
+struct s3c_clkdivs {
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
+};
+
+#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
+struct s3c_pllval {
+	unsigned long		freq;
+	unsigned long		pll_reg;
+};
+
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
+ *
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
+ */
+struct s3c_cpufreq_board {
+	unsigned int	refresh;
+	unsigned int	auto_io:1;	/* automatically init io timings. */
+	unsigned int	need_io:1;	/* set if needs io timing support. */
+
+	/* any non-zero field in here is taken as an upper limit. */
+	struct s3c_freq	max;	/* frequency limits */
+};
+
+/* Things depending on frequency scaling. */
+#ifdef CONFIG_CPU_FREQ_S3C
+#define __init_or_cpufreq
+#else
+#define __init_or_cpufreq __init
+#endif
+
+/* Board functions */
+
+#ifdef CONFIG_CPU_FREQ_S3C
+extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
+#else
+
+static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	return 0;
+}
+#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
new file mode 100644
index 0000000..6412933
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -0,0 +1,88 @@
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* per-cpu initialisation function table. */
+
+struct cpu_table {
+	unsigned long	idcode;
+	unsigned long	idmask;
+	void		(*map_io)(void);
+	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
+	void		(*init_clocks)(int xtal);
+	int		(*init)(void);
+	const char	*name;
+};
+
+extern void s3c_init_cpu(unsigned long idcode,
+			 struct cpu_table *cpus, unsigned int cputab_size);
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
+extern void s5p_init_irq(u32 *vic, u32 num_vic);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+extern void s5p_init_io(struct map_desc *mach_desc,
+			int size, void __iomem *cpuid_addr);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2416_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p6442_sysclass;
+extern struct sysdev_class s5pv210_sysclass;
+
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
new file mode 100644
index 0000000..dc6efd9
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -0,0 +1,87 @@
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-serial.h>
+
+/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+
+	.macro fifo_level_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
+	.endm
+
+	.macro  fifo_full_s5pv210 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S5PV210_UFSTAT_TXFULL
+	.endm
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+	.macro fifo_level_s3c2440 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2440
+#endif
+
+	.macro  fifo_full_s3c2440 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2440_UFSTAT_TXFULL
+	.endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+	.macro	senduart,rd,rx
+		strb 	\rd, [\rx, # S3C2410_UTXH ]
+	.endm
+
+	.macro	busyuart, rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_full \rd, \rx
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
+
+	.macro	waituart,rd,rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_level \rd, \rx
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
new file mode 100644
index 0000000..e6144e4
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -0,0 +1,110 @@
+/* arch/arm/plat-samsung/include/plat/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
+extern struct s3c24xx_uart_resources s5p_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_timer[];
+
+extern struct platform_device s3c64xx_device_iis0;
+extern struct platform_device s3c64xx_device_iis1;
+extern struct platform_device s3c64xx_device_iisv4;
+
+extern struct platform_device s3c64xx_device_spi0;
+extern struct platform_device s3c64xx_device_spi1;
+
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+
+extern struct platform_device s3c64xx_device_ac97;
+
+extern struct platform_device s3c_device_ts;
+
+extern struct platform_device s3c_device_fb;
+extern struct platform_device s3c_device_ohci;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_hwmon;
+extern struct platform_device s3c_device_hsmmc0;
+extern struct platform_device s3c_device_hsmmc1;
+extern struct platform_device s3c_device_hsmmc2;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s5pc100_device_spi0;
+extern struct platform_device s5pc100_device_spi1;
+extern struct platform_device s5pc100_device_spi2;
+extern struct platform_device s5pv210_device_spi0;
+extern struct platform_device s5pv210_device_spi1;
+extern struct platform_device s5p6440_device_spi0;
+extern struct platform_device s5p6440_device_spi1;
+
+extern struct platform_device s3c_device_hwmon;
+
+extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s5pc110_device_onenand;
+
+extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
+
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+
+extern struct platform_device s5p6442_device_pcm0;
+extern struct platform_device s5p6442_device_pcm1;
+extern struct platform_device s5p6442_device_iis0;
+extern struct platform_device s5p6442_device_iis1;
+extern struct platform_device s5p6442_device_spi;
+
+extern struct platform_device s5p6440_device_pcm;
+extern struct platform_device s5p6440_device_iis;
+
+extern struct platform_device s5pc100_device_ac97;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
+extern struct platform_device s5pc100_device_iis0;
+extern struct platform_device s5pc100_device_iis1;
+extern struct platform_device s5pc100_device_iis2;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/dma-core.h b/arch/arm/plat-samsung/include/plat/dma-core.h
index 32ff2a9..32ff2a9 100644
--- a/arch/arm/plat-s3c/include/plat/dma-core.h
+++ b/arch/arm/plat-samsung/include/plat/dma-core.h
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
new file mode 100644
index 0000000..336d5ac
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support - per SoC functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/dma-core.h>
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C_DMA_CHANNELS];
+	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+
+	void	(*direction)(struct s3c2410_dma_chan *chan,
+			     struct s3c24xx_dma_map *map,
+			     enum s3c2410_dmasrc dir);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
new file mode 100644
index 0000000..2e8f8c6
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -0,0 +1,127 @@
+/* arch/arm/plat-samsung/include/plat/dma.h
+ *
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(unsigned int channel,
+		enum s3c2410_dmasrc source, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
new file mode 100644
index 0000000..27d3b49
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -0,0 +1,94 @@
+/* arch/arm/plat-samsung/include/plat/fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - FB platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_FB_H
+#define __PLAT_S3C_FB_H __FILE__
+
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN	(5)
+
+/**
+ * struct s3c_fb_pd_win - per window setup data
+ * @win_mode: The display parameters to initialise (not for window 0)
+ * @virtual_x: The virtual X size.
+ * @virtual_y: The virtual Y size.
+ */
+struct s3c_fb_pd_win {
+	struct fb_videomode	win_mode;
+
+	unsigned short		default_bpp;
+	unsigned short		max_bpp;
+	unsigned short		virtual_x;
+	unsigned short		virtual_y;
+};
+
+/**
+ * struct s3c_fb_platdata -  S3C driver platform specific information
+ * @setup_gpio: Setup the external GPIO pins to the right state to transfer
+ *		the data from the display system to the connected display
+ *		device.
+ * @vidcon0: The base vidcon0 values to control the panel data format.
+ * @vidcon1: The base vidcon1 values to control the panel data output.
+ * @win: The setup data for each hardware window, or NULL for unused.
+ * @display_mode: The LCD output display mode.
+ *
+ * The platform data supplies the video driver with all the information
+ * it requires to work with the display(s) attached to the machine. It
+ * controls the initial mode, the number of display windows (0 is always
+ * the base framebuffer) that are initialised etc.
+ *
+ */
+struct s3c_fb_platdata {
+	void	(*setup_gpio)(void);
+
+	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
+
+	u32			 vidcon0;
+	u32			 vidcon1;
+};
+
+/**
+ * s3c_fb_set_platdata() - Setup the FB device with platform data.
+ * @pd: The platform data to set. The data is copied from the passed structure
+ *      so the machine data can mark the data __initdata so that any unused
+ *      machines will end up dumping their data at runtime.
+ */
+extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
+
+/**
+ * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s3c64xx_fb_gpio_setup_24bpp(void);
+
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
+/**
+ * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pv210_fb_gpio_setup_24bpp(void);
+
+#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
new file mode 100644
index 0000000..3e21c75
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -0,0 +1,234 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int config)
+{
+	return (chip->config->set_config)(chip, off, config);
+}
+
+static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
+					  unsigned int off)
+{
+	return (chip->config->get_config)(chip, off);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+				      unsigned int off, s3c_gpio_pull_t pull)
+{
+	return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
+ * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				     unsigned int off);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg);
+
+
+/**
+ * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa s3c_gpio_getcfg_s3c24xx
+ * @sa s3c_gpio_getcfg_s3c64xx_4bit
+ */
+extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+					  unsigned int off);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+					unsigned int off, unsigned int cfg);
+
+
+/**
+ * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to s3c_gpio_setcfg_s3c64xx_4bit().
+ *
+ * @sa s3c_gpio_getcfg_s3c24xx
+ */
+extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+					     unsigned int off);
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+				unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+				  unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = No pull resistor connected
+ *	01 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+				   unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+					       unsigned int off);
+
+/**
+ * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-up resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1up.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+					    unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ *	00 = Pull-up resistor connected
+ *	10 = Pull-down resistor connected
+ *	x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+				    unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+						unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
new file mode 100644
index 0000000..db4112c
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -0,0 +1,172 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+/* Note, this interface is being added to the s3c64xx arch first and will
+ * be added to the s3c24xx systems later.
+ */
+
+#ifndef __PLAT_GPIO_CFG_H
+#define __PLAT_GPIO_CFG_H __FILE__
+
+typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+/* forward declaration if gpio-core.h hasn't been included */
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_cfg GPIO configuration
+ * @cfg_eint: Configuration setting when used for external interrupt source
+ * @get_pull: Read the current pull configuration for the GPIO
+ * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_config: Set the current configuration for the GPIO
+ * @get_config: Read the current configuration for the GPIO
+ *
+ * Each chip can have more than one type of GPIO bank available and some
+ * have different capabilites even when they have the same control register
+ * layouts. Provide an point to vector control routine and provide any
+ * per-bank configuration information that other systems such as the
+ * external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
+ */
+struct s3c_gpio_cfg {
+	unsigned int	cfg_eint;
+
+	s3c_gpio_pull_t	(*get_pull)(struct s3c_gpio_chip *chip, unsigned offs);
+	int		(*set_pull)(struct s3c_gpio_chip *chip, unsigned offs,
+				    s3c_gpio_pull_t pull);
+
+	unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs);
+	int	 (*set_config)(struct s3c_gpio_chip *chip, unsigned offs,
+			       unsigned config);
+};
+
+#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
+#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
+
+/* Defines for generic pin configurations */
+#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
+#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
+#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
+
+#define s3c_gpio_is_cfg_special(_cfg) \
+	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
+
+/**
+ * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
+ * @pin pin The pin number to configure.
+ * @to to The configuration for the pin's function.
+ *
+ * Configure which function is actually connected to the external
+ * pin, such as an gpio input, output or some form of special function
+ * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *	for (gpio = start; gpio < end; gpio++)
+ *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
+ */
+extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
+
+/**
+ * s3c_gpio_getcfg - Read the current function for a GPIO pin
+ * @pin: The pin to read the configuration value for.
+ *
+ * Read the configuration state of the given @pin, returning a value that
+ * could be passed back to s3c_gpio_cfgpin().
+ *
+ * @sa s3c_gpio_cfgpin
+ */
+extern unsigned s3c_gpio_getcfg(unsigned int pin);
+
+/* Define values for the pull-{up,down} available for each gpio pin.
+ *
+ * These values control the state of the weak pull-{up,down} resistors
+ * available on most pins on the S3C series. Not all chips support both
+ * up or down settings, and it may be dependant on the chip that is being
+ * used to whether the particular mode is available.
+ */
+#define S3C_GPIO_PULL_NONE	((__force s3c_gpio_pull_t)0x00)
+#define S3C_GPIO_PULL_DOWN	((__force s3c_gpio_pull_t)0x01)
+#define S3C_GPIO_PULL_UP	((__force s3c_gpio_pull_t)0x02)
+
+/**
+ * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
+ * @pin: The pin number to configure the pull resistor.
+ * @pull: The configuration for the pull resistor.
+ *
+ * This function sets the state of the pull-{up,down} resistor for the
+ * specified pin. It will return 0 if successfull, or a negative error
+ * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
+*/
+extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the pull resistor value for the specified pin.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
+#endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
new file mode 100644
index 0000000..e358c7d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -0,0 +1,154 @@
+/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define GPIOCON_OFF	(0x00)
+#define GPIODAT_OFF	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+/* Define the core gpiolib support functions that the s3c platforms may
+ * need to extend or change depending on the hardware and the s3c chip
+ * selected at build or found at run time.
+ *
+ * These definitions are not intended for driver inclusion, there is
+ * nothing here that should not live outside the platform and core
+ * specific code.
+*/
+
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+	void (*save)(struct s3c_gpio_chip *chip);
+	void (*resume)(struct s3c_gpio_chip *chip);
+};
+
+struct s3c_gpio_cfg;
+
+/**
+ * struct s3c_gpio_chip - wrapper for specific implementation of gpio
+ * @chip: The chip structure to be exported via gpiolib.
+ * @base: The base pointer to the gpio configuration registers.
+ * @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
+ * @pm_save: Save information for suspend/resume support.
+ *
+ * This wrapper provides the necessary information for the Samsung
+ * specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any  contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
+ */
+struct s3c_gpio_chip {
+	struct gpio_chip	chip;
+	struct s3c_gpio_cfg	*config;
+	struct s3c_gpio_pm	*pm;
+	void __iomem		*base;
+	spinlock_t		 lock;
+#ifdef CONFIG_PM
+	u32			pm_save[4];
+#endif
+};
+
+static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct s3c_gpio_chip, chip);
+}
+
+/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
+
+/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own s3c_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+/**
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
+					   int nr_chips);
+extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
+					    int nr_chips);
+
+extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
+extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
+/* exported for core SoC support to change */
+extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
+{
+	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
+}
+#else
+/* machine specific code should provide s3c_gpiolib_getchip */
+
+#include <mach/gpio-track.h>
+
+static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
+#endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h
new file mode 100644
index 0000000..c167e44
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hwmon.h
@@ -0,0 +1,51 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-samsung/include/plat/iic-core.h b/arch/arm/plat-samsung/include/plat/iic-core.h
new file mode 100644
index 0000000..f182669
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/iic-core.h
@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/iic-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_CORE_H
+#define __ASM_ARCH_IIC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_i2c0_setname(char *name)
+{
+	/* currently this device is always compiled in */
+	s3c_device_i2c0.name = name;
+}
+
+static inline void s3c_i2c1_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C1
+	s3c_device_i2c1.name = name;
+#endif
+}
+
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+	s3c_device_i2c2.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
new file mode 100644
index 0000000..133308b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -0,0 +1,64 @@
+/* arch/arm/plat-s3c/include/plat/iic.h
+ *
+ * Copyright 2004-2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - I2C Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IIC_H
+#define __ASM_ARCH_IIC_H __FILE__
+
+#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
+
+/**
+ *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
+ *	@bus_num: The bus number to use (if possible).
+ *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
+ *	@slave_addr: The I2C address for the slave device (if enabled).
+ *	@frequency: The desired frequency in Hz of the bus.  This is
+ *                  guaranteed to not be exceeded.  If the caller does
+ *                  not care, use zero and the driver will select a
+ *                  useful default.
+ *	@sda_delay: The delay (in ns) applied to SDA edges.
+ *	@cfg_gpio: A callback to configure the pins for I2C operation.
+ */
+struct s3c2410_platform_i2c {
+	int		bus_num;
+	unsigned int	flags;
+	unsigned int	slave_addr;
+	unsigned long	frequency;
+	unsigned int	sda_delay;
+
+	void	(*cfg_gpio)(struct platform_device *dev);
+};
+
+/**
+ * s3c_i2c0_set_platdata - set platform data for i2c0 device
+ * @i2c: The platform data to set, or NULL for default data.
+ *
+ * Register the given platform data for use with the i2c0 device. This
+ * call copies the platform data, so the caller can use __initdata for
+ * their copy.
+ *
+ * This call will set cfg_gpio if is null to the default platform
+ * implementation.
+ *
+ * Any user of s3c_device_i2c0 should call this, even if it is with
+ * NULL to ensure that the device is given the default platform data
+ * as the driver will no longer carry defaults.
+ */
+extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+
+/* defined by architecture to configure gpio */
+extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/irq-uart.h b/arch/arm/plat-samsung/include/plat/irq-uart.h
new file mode 100644
index 0000000..a9331e4
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-uart.h
@@ -0,0 +1,20 @@
+/* arch/arm/plat-samsung/include/plat/irq-uart.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c_uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
+
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
new file mode 100644
index 0000000..a90b534
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
@@ -0,0 +1,13 @@
+/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for Samsung SoC IRQ VIC timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s3c_init_vic_timer_irq(unsigned int vic, unsigned int timer);
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
index 250be31..250be31 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-samsung/include/plat/map-base.h
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
new file mode 100644
index 0000000..b64115f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/nand.h
@@ -0,0 +1,67 @@
+/* arch/arm/mach-s3c2410/include/mach/nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - NAND device controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc:	Entirely disable ECC - Dangerous
+ * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
+ *			Setting this flag will allow the kernel to
+ *			look for it at boot time and also skip the NAND
+ *			scan.
+ * @options:		Default value to set into 'struct nand_chip' options.
+ * @nr_chips:		Number of chips in this set
+ * @nr_partitions:	Number of partitions pointed to by @partitions
+ * @name:		Name of set (optional)
+ * @nr_map:		Map for low-layer logical to physical chip numbers (option)
+ * @partitions:		The mtd partition list
+ *
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
+struct s3c2410_nand_set {
+	unsigned int		disable_ecc:1;
+	unsigned int		flash_bbt:1;
+
+	unsigned int		options;
+	int			nr_chips;
+	int			nr_partitions;
+	char			*name;
+	int			*nr_map;
+	struct mtd_partition	*partitions;
+	struct nand_ecclayout	*ecc_layout;
+};
+
+struct s3c2410_platform_nand {
+	/* timing information for controller, all times in nanoseconds */
+
+	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
+	int	twrph0;	/* active time for nWE/nOE */
+	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
+
+	unsigned int	ignore_unset_ecc:1;
+
+	int			nr_sets;
+	struct s3c2410_nand_set *sets;
+
+	void			(*select_chip)(struct s3c2410_nand_set *,
+					       int chip);
+};
+
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-samsung/include/plat/onenand-core.h b/arch/arm/plat-samsung/include/plat/onenand-core.h
new file mode 100644
index 0000000..7701cb7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/onenand-core.h
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/plat-samsung/onenand-core.h
+ *
+ *  Copyright (c) 2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ONENAND_CORE_H
+#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+	s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+	s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h
new file mode 100644
index 0000000..b8b7e1d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pll6553x.h
@@ -0,0 +1,51 @@
+/* arch/arm/plat-samsung/include/plat/pll6553x.h
+ *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL6553x PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
+
+#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
+#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
+#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+#define PLL6553X_KDIV_MASK	(0xffff)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll0, u32 pll1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll1 & PLL6553X_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
new file mode 100644
index 0000000..245836d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -0,0 +1,189 @@
+/* arch/arm/plat-samsung/include/plat/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c_pm_init(void);
+
+#else
+
+static inline int s3c_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
+
+/* from sleep.S */
+
+extern int  s3c_cpu_save(unsigned long *saveblk);
+extern void s3c_cpu_resume(void);
+
+extern void s3c2410_cpu_suspend(void);
+
+extern unsigned long s3c_sleep_save_phys;
+
+/* sleep save info */
+
+/**
+ * struct sleep_save - save information for shared peripherals.
+ * @reg: Pointer to the register to save.
+ * @val: Holder for the value saved from reg.
+ *
+ * This describes a list of registers which is used by the pm core and
+ * other subsystem to save and restore register values over suspend.
+ */
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+	u32	ulcon;
+	u32	ucon;
+	u32	ufcon;
+	u32	umcon;
+	u32	ubrdiv;
+	u32	udivslot;
+};
+
+/* helper functions to save/restore lists of registers. */
+
+extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
+extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c_irqext_wake(unsigned int irqno, unsigned int state);
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c_irqext_wake NULL
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
+
+/* PM debug functions */
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+#else
+#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while(0)
+#define s3c_pm_check_restore() do { } while(0)
+#define s3c_pm_check_cleanup() do { } while(0)
+#define s3c_pm_check_store()   do { } while(0)
+#endif
+
+/**
+ * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
+ *
+ * Setup all the necessary GPIO pins for waking the system on external
+ * interrupt.
+ */
+extern void s3c_pm_configure_extint(void);
+
+/**
+ * s3c_pm_restore_gpios() - restore the state of the gpios after sleep.
+ *
+ * Restore the state of the GPIO pins after sleep, which may involve ensuring
+ * that we do not glitch the state of the pins from that the bootloader's
+ * resume code has done.
+*/
+extern void s3c_pm_restore_gpios(void);
+
+/**
+ * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
+ *
+ * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios().
+ */
+extern void s3c_pm_save_gpios(void);
+
+/**
+ * s3c_pm_cb_flushcache - callback for assembly code
+ *
+ * Callback to issue flush_cache_all() as this call is
+ * not a directly callable object.
+ */
+extern void s3c_pm_cb_flushcache(void);
+
+extern void s3c_pm_save_core(void);
+extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-s3c/include/plat/regs-ac97.h b/arch/arm/plat-samsung/include/plat/regs-ac97.h
index c3878f7..c3878f7 100644
--- a/arch/arm/plat-s3c/include/plat/regs-ac97.h
+++ b/arch/arm/plat-samsung/include/plat/regs-ac97.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
new file mode 100644
index 0000000..7554c4f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
+ *
+ * Copyright (c) 2004 Shannon Holland <holland@loser.net>
+ *
+ * This program is free software; yosu can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 ADC registers
+*/
+
+#ifndef __ASM_ARCH_REGS_ADC_H
+#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
+
+#define S3C2410_ADCREG(x) (x)
+
+#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
+#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
+#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
+#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
+#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
+#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
+#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
+#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
+
+
+/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL		(1<<16)
+#define S3C2410_ADCCON_ECFLG		(1<<15)
+#define S3C2410_ADCCON_PRSCEN		(1<<14)
+#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
+#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
+#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
+#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
+#define S3C2410_ADCCON_STDBM		(1<<2)
+#define S3C2410_ADCCON_READ_START	(1<<1)
+#define S3C2410_ADCCON_ENABLE_START	(1<<0)
+#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
+
+
+/* ADCTSC Register Bits */
+#define S3C2410_ADCTSC_YM_SEN		(1<<7)
+#define S3C2410_ADCTSC_YP_SEN		(1<<6)
+#define S3C2410_ADCTSC_XM_SEN		(1<<5)
+#define S3C2410_ADCTSC_XP_SEN		(1<<4)
+#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
+#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
+
+/* ADCDAT0 Bits */
+#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
+
+/* ADCDAT1 Bits */
+#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
+#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
+#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
+#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
+
+#endif /* __ASM_ARCH_REGS_ADC_H */
+
+
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
new file mode 100644
index 0000000..0f43599
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
new file mode 100644
index 0000000..0ef806e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -0,0 +1,366 @@
+/* arch/arm/plat-samsung/include/plat/regs-fb.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
+ * S3C64XX series such as the S3C6400 and S3C6410.
+ *
+ * The file does not contain the cpu specific items which are based on
+ * whichever architecture is selected, it only contains the core of the
+ * register set. See <mach/regs-fb.h> to get the specifics.
+ *
+ * Note, we changed to using regs-fb.h as it avoids any clashes with
+ * the original regs-lcd.h so out of the way of regs-lcd.h as well as
+ * indicating the newer block is much more than just an LCD interface.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Please do not include this file directly, use <mach/regs-fb.h> to
+ * ensure all the localised SoC support is included as necessary.
+*/
+
+/* VIDCON0 */
+
+#define VIDCON0					(0x00)
+#define VIDCON0_INTERLACE			(1 << 29)
+#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
+#define VIDCON0_VIDOUT_SHIFT			(26)
+#define VIDCON0_VIDOUT_RGB			(0x0 << 26)
+#define VIDCON0_VIDOUT_TV			(0x1 << 26)
+#define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
+#define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
+
+#define VIDCON0_L1_DATA_MASK			(0x7 << 23)
+#define VIDCON0_L1_DATA_SHIFT			(23)
+#define VIDCON0_L1_DATA_16BPP			(0x0 << 23)
+#define VIDCON0_L1_DATA_18BPP16			(0x1 << 23)
+#define VIDCON0_L1_DATA_18BPP9			(0x2 << 23)
+#define VIDCON0_L1_DATA_24BPP			(0x3 << 23)
+#define VIDCON0_L1_DATA_18BPP			(0x4 << 23)
+#define VIDCON0_L1_DATA_16BPP8			(0x5 << 23)
+
+#define VIDCON0_L0_DATA_MASK			(0x7 << 20)
+#define VIDCON0_L0_DATA_SHIFT			(20)
+#define VIDCON0_L0_DATA_16BPP			(0x0 << 20)
+#define VIDCON0_L0_DATA_18BPP16			(0x1 << 20)
+#define VIDCON0_L0_DATA_18BPP9			(0x2 << 20)
+#define VIDCON0_L0_DATA_24BPP			(0x3 << 20)
+#define VIDCON0_L0_DATA_18BPP			(0x4 << 20)
+#define VIDCON0_L0_DATA_16BPP8			(0x5 << 20)
+
+#define VIDCON0_PNRMODE_MASK			(0x3 << 17)
+#define VIDCON0_PNRMODE_SHIFT			(17)
+#define VIDCON0_PNRMODE_RGB			(0x0 << 17)
+#define VIDCON0_PNRMODE_BGR			(0x1 << 17)
+#define VIDCON0_PNRMODE_SERIAL_RGB		(0x2 << 17)
+#define VIDCON0_PNRMODE_SERIAL_BGR		(0x3 << 17)
+
+#define VIDCON0_CLKVALUP			(1 << 16)
+#define VIDCON0_CLKVAL_F_MASK			(0xff << 6)
+#define VIDCON0_CLKVAL_F_SHIFT			(6)
+#define VIDCON0_CLKVAL_F_LIMIT			(0xff)
+#define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
+#define VIDCON0_VLCKFREE			(1 << 5)
+#define VIDCON0_CLKDIR				(1 << 4)
+
+#define VIDCON0_CLKSEL_MASK			(0x3 << 2)
+#define VIDCON0_CLKSEL_SHIFT			(2)
+#define VIDCON0_CLKSEL_HCLK			(0x0 << 2)
+#define VIDCON0_CLKSEL_LCD			(0x1 << 2)
+#define VIDCON0_CLKSEL_27M			(0x3 << 2)
+
+#define VIDCON0_ENVID				(1 << 1)
+#define VIDCON0_ENVID_F				(1 << 0)
+
+#define VIDCON1					(0x04)
+#define VIDCON1_LINECNT_MASK			(0x7ff << 16)
+#define VIDCON1_LINECNT_SHIFT			(16)
+#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
+#define VIDCON1_VSTATUS_MASK			(0x3 << 13)
+#define VIDCON1_VSTATUS_SHIFT			(13)
+#define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
+#define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
+#define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
+#define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
+
+#define VIDCON1_INV_VCLK			(1 << 7)
+#define VIDCON1_INV_HSYNC			(1 << 6)
+#define VIDCON1_INV_VSYNC			(1 << 5)
+#define VIDCON1_INV_VDEN			(1 << 4)
+
+/* VIDCON2 */
+
+#define VIDCON2					(0x08)
+#define VIDCON2_EN601				(1 << 23)
+#define VIDCON2_TVFMTSEL_SW			(1 << 14)
+
+#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
+#define VIDCON2_TVFMTSEL1_SHIFT			(12)
+#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
+#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
+#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
+
+#define VIDCON2_ORGYCbCr			(1 << 8)
+#define VIDCON2_YUVORDCrCb			(1 << 7)
+
+/* VIDTCON0 */
+
+#define VIDTCON0_VBPDE_MASK			(0xff << 24)
+#define VIDTCON0_VBPDE_SHIFT			(24)
+#define VIDTCON0_VBPDE_LIMIT			(0xff)
+#define VIDTCON0_VBPDE(_x)			((_x) << 24)
+
+#define VIDTCON0_VBPD_MASK			(0xff << 16)
+#define VIDTCON0_VBPD_SHIFT			(16)
+#define VIDTCON0_VBPD_LIMIT			(0xff)
+#define VIDTCON0_VBPD(_x)			((_x) << 16)
+
+#define VIDTCON0_VFPD_MASK			(0xff << 8)
+#define VIDTCON0_VFPD_SHIFT			(8)
+#define VIDTCON0_VFPD_LIMIT			(0xff)
+#define VIDTCON0_VFPD(_x)			((_x) << 8)
+
+#define VIDTCON0_VSPW_MASK			(0xff << 0)
+#define VIDTCON0_VSPW_SHIFT			(0)
+#define VIDTCON0_VSPW_LIMIT			(0xff)
+#define VIDTCON0_VSPW(_x)			((_x) << 0)
+
+/* VIDTCON1 */
+
+#define VIDTCON1_VFPDE_MASK			(0xff << 24)
+#define VIDTCON1_VFPDE_SHIFT			(24)
+#define VIDTCON1_VFPDE_LIMIT			(0xff)
+#define VIDTCON1_VFPDE(_x)			((_x) << 24)
+
+#define VIDTCON1_HBPD_MASK			(0xff << 16)
+#define VIDTCON1_HBPD_SHIFT			(16)
+#define VIDTCON1_HBPD_LIMIT			(0xff)
+#define VIDTCON1_HBPD(_x)			((_x) << 16)
+
+#define VIDTCON1_HFPD_MASK			(0xff << 8)
+#define VIDTCON1_HFPD_SHIFT			(8)
+#define VIDTCON1_HFPD_LIMIT			(0xff)
+#define VIDTCON1_HFPD(_x)			((_x) << 8)
+
+#define VIDTCON1_HSPW_MASK			(0xff << 0)
+#define VIDTCON1_HSPW_SHIFT			(0)
+#define VIDTCON1_HSPW_LIMIT			(0xff)
+#define VIDTCON1_HSPW(_x)			((_x) << 0)
+
+#define VIDTCON2				(0x18)
+#define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
+#define VIDTCON2_LINEVAL_SHIFT			(11)
+#define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
+#define VIDTCON2_LINEVAL(_x)			((_x) << 11)
+
+#define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
+#define VIDTCON2_HOZVAL_SHIFT			(0)
+#define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
+#define VIDTCON2_HOZVAL(_x)			((_x) << 0)
+
+/* WINCONx */
+
+
+#define WINCONx_BITSWP				(1 << 18)
+#define WINCONx_BYTSWP				(1 << 17)
+#define WINCONx_HAWSWP				(1 << 16)
+#define WINCONx_BURSTLEN_MASK			(0x3 << 9)
+#define WINCONx_BURSTLEN_SHIFT			(9)
+#define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
+#define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
+#define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
+
+#define WINCONx_ENWIN				(1 << 0)
+#define WINCON0_BPPMODE_MASK			(0xf << 2)
+#define WINCON0_BPPMODE_SHIFT			(2)
+#define WINCON0_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON0_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON0_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON0_BPPMODE_8BPP_PALETTE		(0x3 << 2)
+#define WINCON0_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON0_BPPMODE_16BPP_1555		(0x7 << 2)
+#define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
+
+#define WINCON1_BLD_PIX				(1 << 6)
+
+#define WINCON1_ALPHA_SEL			(1 << 1)
+#define WINCON1_BPPMODE_MASK			(0xf << 2)
+#define WINCON1_BPPMODE_SHIFT			(2)
+#define WINCON1_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON1_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON1_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON1_BPPMODE_8BPP_PALETTE		(0x3 << 2)
+#define WINCON1_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON1_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON1_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON1_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON1_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON1_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON1_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON1_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
+
+
+#define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
+#define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
+#define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
+#define VIDOSDxA_TOPLEFT_X(_x)			((_x) << 11)
+
+#define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
+#define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
+#define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
+#define VIDOSDxA_TOPLEFT_Y(_x)			((_x) << 0)
+
+#define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
+#define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
+#define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
+#define VIDOSDxB_BOTRIGHT_X(_x)			((_x) << 11)
+
+#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
+#define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
+#define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
+#define VIDOSDxB_BOTRIGHT_Y(_x)			((_x) << 0)
+
+/* For VIDOSD[1..4]C */
+#define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
+#define VIDISD14C_ALPHA0_G_MASK			(0xf << 16)
+#define VIDISD14C_ALPHA0_G_SHIFT		(16)
+#define VIDISD14C_ALPHA0_G_LIMIT		(0xf)
+#define VIDISD14C_ALPHA0_G(_x)			((_x) << 16)
+#define VIDISD14C_ALPHA0_B_MASK			(0xf << 12)
+#define VIDISD14C_ALPHA0_B_SHIFT		(12)
+#define VIDISD14C_ALPHA0_B_LIMIT		(0xf)
+#define VIDISD14C_ALPHA0_B(_x)			((_x) << 12)
+#define VIDISD14C_ALPHA1_R_MASK			(0xf << 8)
+#define VIDISD14C_ALPHA1_R_SHIFT		(8)
+#define VIDISD14C_ALPHA1_R_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_R(_x)			((_x) << 8)
+#define VIDISD14C_ALPHA1_G_MASK			(0xf << 4)
+#define VIDISD14C_ALPHA1_G_SHIFT		(4)
+#define VIDISD14C_ALPHA1_G_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_G(_x)			((_x) << 4)
+#define VIDISD14C_ALPHA1_B_MASK			(0xf << 0)
+#define VIDISD14C_ALPHA1_B_SHIFT		(0)
+#define VIDISD14C_ALPHA1_B_LIMIT		(0xf)
+#define VIDISD14C_ALPHA1_B(_x)			((_x) << 0)
+
+/* Video buffer addresses */
+#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
+#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
+#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
+#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
+#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
+
+#define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
+#define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
+#define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
+#define VIDW_BUF_SIZE_OFFSET(_x)		((_x) << 13)
+
+#define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
+#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
+#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		((_x) << 0)
+
+/* Interrupt controls and status */
+
+#define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
+#define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
+#define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
+#define VIDINTCON0_FIFOINTERVAL(_x)		((_x) << 20)
+
+#define VIDINTCON0_INT_SYSMAINCON		(1 << 19)
+#define VIDINTCON0_INT_SYSSUBCON		(1 << 18)
+#define VIDINTCON0_INT_I80IFDONE		(1 << 17)
+
+#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
+#define VIDINTCON0_FRAMESEL0_SHIFT		(15)
+#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
+#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
+#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
+#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
+
+#define VIDINTCON0_FRAMESEL1			(1 << 14)
+#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 14)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 14)
+#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 14)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 14)
+
+#define VIDINTCON0_INT_FRAME			(1 << 12)
+#define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
+#define VIDINTCON0_FIFIOSEL_SHIFT		(5)
+#define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
+
+#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
+#define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
+#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x0 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x1 << 2)
+#define VIDINTCON0_FIFOLEVEL_TO75PC		(0x2 << 2)
+#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x3 << 2)
+#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 2)
+
+#define VIDINTCON0_INT_FIFO_MASK		(0x3 << 0)
+#define VIDINTCON0_INT_FIFO_SHIFT		(0)
+#define VIDINTCON0_INT_ENABLE			(1 << 0)
+
+#define VIDINTCON1				(0x134)
+#define VIDINTCON1_INT_I180			(1 << 2)
+#define VIDINTCON1_INT_FRAME			(1 << 1)
+#define VIDINTCON1_INT_FIFO			(1 << 0)
+
+/* Window colour-key control registers */
+
+#define WxKEYCON0_KEYBL_EN			(1 << 26)
+#define WxKEYCON0_KEYEN_F			(1 << 25)
+#define WxKEYCON0_DIRCON			(1 << 24)
+#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
+#define WxKEYCON0_COMPKEY_SHIFT			(0)
+#define WxKEYCON0_COMPKEY_LIMIT			(0xffffff)
+#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
+#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
+#define WxKEYCON1_COLVAL_SHIFT			(0)
+#define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
+#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
+
+
+/* Window blanking (MAP) */
+
+#define WINxMAP_MAP				(1 << 24)
+#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
+#define WINxMAP_MAP_COLOUR_SHIFT		(0)
+#define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
+#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
+
+#define WPALCON_PAL_UPDATE			(1 << 9)
+#define WPALCON_W1PAL_MASK			(0x7 << 3)
+#define WPALCON_W1PAL_SHIFT			(3)
+#define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
+#define WPALCON_W1PAL_24BPP			(0x1 << 3)
+#define WPALCON_W1PAL_19BPP_A666		(0x2 << 3)
+#define WPALCON_W1PAL_18BPP_A665		(0x3 << 3)
+#define WPALCON_W1PAL_18BPP			(0x4 << 3)
+#define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
+#define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
+
+#define WPALCON_W0PAL_MASK			(0x7 << 0)
+#define WPALCON_W0PAL_SHIFT			(0)
+#define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
+#define WPALCON_W0PAL_24BPP			(0x1 << 0)
+#define WPALCON_W0PAL_19BPP_A666		(0x2 << 0)
+#define WPALCON_W0PAL_18BPP_A665		(0x3 << 0)
+#define WPALCON_W0PAL_18BPP			(0x4 << 0)
+#define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
+#define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-iic.h b/arch/arm/plat-samsung/include/plat/regs-iic.h
index 2f7c17d..2f7c17d 100644
--- a/arch/arm/plat-s3c/include/plat/regs-iic.h
+++ b/arch/arm/plat-samsung/include/plat/regs-iic.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
index c63cd3f..c63cd3f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-irqtype.h
+++ b/arch/arm/plat-samsung/include/plat/regs-irqtype.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-samsung/include/plat/regs-nand.h
index 238efea..238efea 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-samsung/include/plat/regs-nand.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h
new file mode 100644
index 0000000..930ea8b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-onenand.h
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
+ *
+ *  Copyright (C) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SAMSUNG_ONENAND_H__
+#define __SAMSUNG_ONENAND_H__
+
+#include <mach/hardware.h>
+
+/*
+ * OneNAND Controller
+ */
+#define MEM_CFG_OFFSET		0x0000
+#define BURST_LEN_OFFSET	0x0010
+#define MEM_RESET_OFFSET	0x0020
+#define INT_ERR_STAT_OFFSET	0x0030
+#define INT_ERR_MASK_OFFSET	0x0040
+#define INT_ERR_ACK_OFFSET	0x0050
+#define ECC_ERR_STAT_OFFSET	0x0060
+#define MANUFACT_ID_OFFSET	0x0070
+#define DEVICE_ID_OFFSET	0x0080
+#define DATA_BUF_SIZE_OFFSET	0x0090
+#define BOOT_BUF_SIZE_OFFSET	0x00A0
+#define BUF_AMOUNT_OFFSET	0x00B0
+#define TECH_OFFSET		0x00C0
+#define FBA_WIDTH_OFFSET	0x00D0
+#define FPA_WIDTH_OFFSET	0x00E0
+#define FSA_WIDTH_OFFSET	0x00F0
+#define TRANS_SPARE_OFFSET	0x0140
+#define DBS_DFS_WIDTH_OFFSET	0x0160
+#define INT_PIN_ENABLE_OFFSET	0x01A0
+#define ACC_CLOCK_OFFSET	0x01C0
+#define FLASH_VER_ID_OFFSET	0x01F0
+#define FLASH_AUX_CNTRL_OFFSET	0x0300		/* s3c64xx only */
+
+#define ONENAND_MEM_RESET_HOT	0x3
+#define ONENAND_MEM_RESET_COLD	0x2
+#define ONENAND_MEM_RESET_WARM	0x1
+
+#define CACHE_OP_ERR		(1 << 13)
+#define RST_CMP			(1 << 12)
+#define RDY_ACT			(1 << 11)
+#define INT_ACT			(1 << 10)
+#define UNSUP_CMD		(1 << 9)
+#define LOCKED_BLK		(1 << 8)
+#define BLK_RW_CMP		(1 << 7)
+#define ERS_CMP			(1 << 6)
+#define PGM_CMP			(1 << 5)
+#define LOAD_CMP		(1 << 4)
+#define ERS_FAIL		(1 << 3)
+#define PGM_FAIL		(1 << 2)
+#define INT_TO			(1 << 1)
+#define LD_FAIL_ECC_ERR		(1 << 0)
+
+#define TSRF			(1 << 0)
+
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
new file mode 100644
index 0000000..65c190d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -0,0 +1,65 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Internal RTC register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_RTC_H
+#define __ASM_ARCH_REGS_RTC_H __FILE__
+
+#define S3C2410_RTCREG(x) (x)
+
+#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
+#define S3C2410_RTCCON_RTCEN  (1<<0)
+#define S3C2410_RTCCON_CLKSEL (1<<1)
+#define S3C2410_RTCCON_CNTSEL (1<<2)
+#define S3C2410_RTCCON_CLKRST (1<<3)
+#define S3C64XX_RTCCON_TICEN  (1<<8)
+
+#define S3C64XX_RTCCON_TICMSK (0xF<<7)
+#define S3C64XX_RTCCON_TICSHT (7)
+
+#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
+#define S3C2410_TICNT_ENABLE  (1<<7)
+
+#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
+#define S3C2410_RTCALM_ALMEN  (1<<6)
+#define S3C2410_RTCALM_YEAREN (1<<5)
+#define S3C2410_RTCALM_MONEN  (1<<4)
+#define S3C2410_RTCALM_DAYEN  (1<<3)
+#define S3C2410_RTCALM_HOUREN (1<<2)
+#define S3C2410_RTCALM_MINEN  (1<<1)
+#define S3C2410_RTCALM_SECEN  (1<<0)
+
+#define S3C2410_RTCALM_ALL \
+  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
+  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
+  S3C2410_RTCALM_SECEN
+
+
+#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
+#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
+#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
+
+#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
+#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
+#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
+
+#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
+
+#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
+#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
+#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
+#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
+#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
+#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
+#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
+
+
+#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
index e34049ad..e34049ad 100644
--- a/arch/arm/plat-s3c/include/plat/regs-sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/regs-sdhci.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
new file mode 100644
index 0000000..a6eba84
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -0,0 +1,281 @@
+/* arch/arm/plat-samsung/include/plat/regs-serial.h
+ *
+ *  From linux/include/asm-arm/hardware/serial_s3c2410.h
+ *
+ *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
+ *
+ *  Adapted from:
+ *
+ *  Internal header file for MX1ADS serial ports (UART1 & 2)
+ *
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef __ASM_ARM_REGS_SERIAL_H
+#define __ASM_ARM_REGS_SERIAL_H
+
+#define S3C24XX_VA_UART0      (S3C_VA_UART)
+#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
+#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
+
+#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
+#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
+#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
+
+#define S3C2410_URXH	  (0x24)
+#define S3C2410_UTXH	  (0x20)
+#define S3C2410_ULCON	  (0x00)
+#define S3C2410_UCON	  (0x04)
+#define S3C2410_UFCON	  (0x08)
+#define S3C2410_UMCON	  (0x0C)
+#define S3C2410_UBRDIV	  (0x28)
+#define S3C2410_UTRSTAT	  (0x10)
+#define S3C2410_UERSTAT	  (0x14)
+#define S3C2410_UFSTAT	  (0x18)
+#define S3C2410_UMSTAT	  (0x1C)
+
+#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
+
+#define S3C2410_LCON_CS5	  (0x0)
+#define S3C2410_LCON_CS6	  (0x1)
+#define S3C2410_LCON_CS7	  (0x2)
+#define S3C2410_LCON_CS8	  (0x3)
+#define S3C2410_LCON_CSMASK	  (0x3)
+
+#define S3C2410_LCON_PNONE	  (0x0)
+#define S3C2410_LCON_PEVEN	  (0x5 << 3)
+#define S3C2410_LCON_PODD	  (0x4 << 3)
+#define S3C2410_LCON_PMASK	  (0x7 << 3)
+
+#define S3C2410_LCON_STOPB	  (1<<2)
+#define S3C2410_LCON_IRM          (1<<6)
+
+#define S3C2440_UCON_CLKMASK	  (3<<10)
+#define S3C2440_UCON_PCLK	  (0<<10)
+#define S3C2440_UCON_UCLK	  (1<<10)
+#define S3C2440_UCON_PCLK2	  (2<<10)
+#define S3C2440_UCON_FCLK	  (3<<10)
+#define S3C2443_UCON_EPLL	  (3<<10)
+
+#define S3C6400_UCON_CLKMASK	(3<<10)
+#define S3C6400_UCON_PCLK	(0<<10)
+#define S3C6400_UCON_PCLK2	(2<<10)
+#define S3C6400_UCON_UCLK0	(1<<10)
+#define S3C6400_UCON_UCLK1	(3<<10)
+
+#define S3C2440_UCON2_FCLK_EN	  (1<<15)
+#define S3C2440_UCON0_DIVMASK	  (15 << 12)
+#define S3C2440_UCON1_DIVMASK	  (15 << 12)
+#define S3C2440_UCON2_DIVMASK	  (7 << 12)
+#define S3C2440_UCON_DIVSHIFT	  (12)
+
+#define S3C2412_UCON_CLKMASK	(3<<10)
+#define S3C2412_UCON_UCLK	(1<<10)
+#define S3C2412_UCON_USYSCLK	(3<<10)
+#define S3C2412_UCON_PCLK	(0<<10)
+#define S3C2412_UCON_PCLK2	(2<<10)
+
+#define S3C2410_UCON_UCLK	  (1<<10)
+#define S3C2410_UCON_SBREAK	  (1<<4)
+
+#define S3C2410_UCON_TXILEVEL	  (1<<9)
+#define S3C2410_UCON_RXILEVEL	  (1<<8)
+#define S3C2410_UCON_TXIRQMODE	  (1<<2)
+#define S3C2410_UCON_RXIRQMODE	  (1<<0)
+#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
+#define S3C2443_UCON_LOOPBACK	  (1<<5)
+
+#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
+				   S3C2410_UCON_RXILEVEL  | \
+				   S3C2410_UCON_TXIRQMODE | \
+				   S3C2410_UCON_RXIRQMODE | \
+				   S3C2410_UCON_RXFIFO_TOI)
+
+#define S3C2410_UFCON_FIFOMODE	  (1<<0)
+#define S3C2410_UFCON_TXTRIG0	  (0<<6)
+#define S3C2410_UFCON_RXTRIG8	  (1<<4)
+#define S3C2410_UFCON_RXTRIG12	  (2<<4)
+
+/* S3C2440 FIFO trigger levels */
+#define S3C2440_UFCON_RXTRIG1	  (0<<4)
+#define S3C2440_UFCON_RXTRIG8	  (1<<4)
+#define S3C2440_UFCON_RXTRIG16	  (2<<4)
+#define S3C2440_UFCON_RXTRIG32	  (3<<4)
+
+#define S3C2440_UFCON_TXTRIG0	  (0<<6)
+#define S3C2440_UFCON_TXTRIG16	  (1<<6)
+#define S3C2440_UFCON_TXTRIG32	  (2<<6)
+#define S3C2440_UFCON_TXTRIG48	  (3<<6)
+
+#define S3C2410_UFCON_RESETBOTH	  (3<<1)
+#define S3C2410_UFCON_RESETTX	  (1<<2)
+#define S3C2410_UFCON_RESETRX	  (1<<1)
+
+#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
+				   S3C2410_UFCON_TXTRIG0  | \
+				   S3C2410_UFCON_RXTRIG8 )
+
+#define	S3C2410_UMCOM_AFC	  (1<<4)
+#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
+
+#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
+#define S3C2412_UMCON_AFC_56	(1<<5)
+#define S3C2412_UMCON_AFC_48	(2<<5)
+#define S3C2412_UMCON_AFC_40	(3<<5)
+#define S3C2412_UMCON_AFC_32	(4<<5)
+#define S3C2412_UMCON_AFC_24	(5<<5)
+#define S3C2412_UMCON_AFC_16	(6<<5)
+#define S3C2412_UMCON_AFC_8	(7<<5)
+
+#define S3C2410_UFSTAT_TXFULL	  (1<<9)
+#define S3C2410_UFSTAT_RXFULL	  (1<<8)
+#define S3C2410_UFSTAT_TXMASK	  (15<<4)
+#define S3C2410_UFSTAT_TXSHIFT	  (4)
+#define S3C2410_UFSTAT_RXMASK	  (15<<0)
+#define S3C2410_UFSTAT_RXSHIFT	  (0)
+
+/* UFSTAT S3C24A0 */
+#define S3C24A0_UFSTAT_TXFULL	  (1 << 14)
+#define S3C24A0_UFSTAT_RXFULL	  (1 << 6)
+#define S3C24A0_UFSTAT_TXMASK	  (63 << 8)
+#define S3C24A0_UFSTAT_TXSHIFT	  (8)
+#define S3C24A0_UFSTAT_RXMASK	  (63)
+#define S3C24A0_UFSTAT_RXSHIFT	  (0)
+
+/* UFSTAT S3C2443 same as S3C2440 */
+#define S3C2440_UFSTAT_TXFULL	  (1<<14)
+#define S3C2440_UFSTAT_RXFULL	  (1<<6)
+#define S3C2440_UFSTAT_TXSHIFT	  (8)
+#define S3C2440_UFSTAT_RXSHIFT	  (0)
+#define S3C2440_UFSTAT_TXMASK	  (63<<8)
+#define S3C2440_UFSTAT_RXMASK	  (63)
+
+#define S3C2410_UTRSTAT_TXE	  (1<<2)
+#define S3C2410_UTRSTAT_TXFE	  (1<<1)
+#define S3C2410_UTRSTAT_RXDR	  (1<<0)
+
+#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
+#define S3C2410_UERSTAT_FRAME	  (1<<2)
+#define S3C2410_UERSTAT_BREAK	  (1<<3)
+#define S3C2443_UERSTAT_PARITY	  (1<<1)
+
+#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
+				   S3C2410_UERSTAT_FRAME | \
+				   S3C2410_UERSTAT_BREAK)
+
+#define S3C2410_UMSTAT_CTS	  (1<<0)
+#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
+
+#define S3C2443_DIVSLOT		  (0x2C)
+
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP		0x30
+#define S3C64XX_UINTSP		0x34
+#define S3C64XX_UINTM		0x38
+
+/* Following are specific to S5PV210 and S5P6442 */
+#define S5PV210_UCON_CLKMASK	(1<<10)
+#define S5PV210_UCON_PCLK	(0<<10)
+#define S5PV210_UCON_UCLK	(1<<10)
+
+#define S5PV210_UFCON_TXTRIG0	(0<<8)
+#define S5PV210_UFCON_TXTRIG4	(1<<8)
+#define S5PV210_UFCON_TXTRIG8	(2<<8)
+#define S5PV210_UFCON_TXTRIG16	(3<<8)
+#define S5PV210_UFCON_TXTRIG32	(4<<8)
+#define S5PV210_UFCON_TXTRIG64	(5<<8)
+#define S5PV210_UFCON_TXTRIG128 (6<<8)
+#define S5PV210_UFCON_TXTRIG256 (7<<8)
+
+#define S5PV210_UFCON_RXTRIG1	(0<<4)
+#define S5PV210_UFCON_RXTRIG4	(1<<4)
+#define S5PV210_UFCON_RXTRIG8	(2<<4)
+#define S5PV210_UFCON_RXTRIG16	(3<<4)
+#define S5PV210_UFCON_RXTRIG32	(4<<4)
+#define S5PV210_UFCON_RXTRIG64	(5<<4)
+#define S5PV210_UFCON_RXTRIG128	(6<<4)
+#define S5PV210_UFCON_RXTRIG256	(7<<4)
+
+#define S5PV210_UFSTAT_TXFULL	(1<<24)
+#define S5PV210_UFSTAT_RXFULL	(1<<8)
+#define S5PV210_UFSTAT_TXMASK	(255<<16)
+#define S5PV210_UFSTAT_TXSHIFT	(16)
+#define S5PV210_UFSTAT_RXMASK	(255<<0)
+#define S5PV210_UFSTAT_RXSHIFT	(0)
+
+#ifndef __ASSEMBLY__
+
+/* struct s3c24xx_uart_clksrc
+ *
+ * this structure defines a named clock source that can be used for the
+ * uart, so that the best clock can be selected for the requested baud
+ * rate.
+ *
+ * min_baud and max_baud define the range of baud-rates this clock is
+ * acceptable for, if they are both zero, it is assumed any baud rate that
+ * can be generated from this clock will be used.
+ *
+ * divisor gives the divisor from the clock to the one seen by the uart
+*/
+
+struct s3c24xx_uart_clksrc {
+	const char	*name;
+	unsigned int	 divisor;
+	unsigned int	 min_baud;
+	unsigned int	 max_baud;
+};
+
+/* configuration structure for per-machine configurations for the
+ * serial port
+ *
+ * the pointer is setup by the machine specific initialisation from the
+ * arch/arm/mach-s3c2410/ directory.
+*/
+
+struct s3c2410_uartcfg {
+	unsigned char	   hwport;	 /* hardware port number */
+	unsigned char	   unused;
+	unsigned short	   flags;
+	upf_t		   uart_flags;	 /* default uart flags */
+
+	unsigned long	   ucon;	 /* value of ucon for port */
+	unsigned long	   ulcon;	 /* value of ulcon for port */
+	unsigned long	   ufcon;	 /* value of ufcon for port */
+
+	struct s3c24xx_uart_clksrc *clocks;
+	unsigned int		    clocks_size;
+};
+
+/* s3c24xx_uart_devs
+ *
+ * this is exported from the core as we cannot use driver_register(),
+ * or platform_add_device() before the console_initcall()
+*/
+
+extern struct platform_device *s3c24xx_uart_devs[4];
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARM_REGS_SERIAL_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
index d097d92..d097d92 100644
--- a/arch/arm/plat-s3c/include/plat/regs-timer.h
+++ b/arch/arm/plat-samsung/include/plat/regs-timer.h
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
new file mode 100644
index 0000000..a111ad8
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, this is a separate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
+#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
+#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
+
+#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11			(1 << 6)
+#define S3C_PHYCLK_EXT_OSC			(1 << 5)
+#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
+#define S3C_PHYCLK_ID_PULL			(1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
+#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
+
+#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK			(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 2)
+#define S3C_RSTCON_PHY				(1 << 0)
+
+#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
index 8d18d9d..8d18d9d 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
diff --git a/arch/arm/plat-s3c/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
index 4938492..4938492 100644
--- a/arch/arm/plat-s3c/include/plat/regs-watchdog.h
+++ b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
new file mode 100644
index 0000000..5fe6721
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__S3C_DMA_PL330_H_
+#define	__S3C_DMA_PL330_H_
+
+#define S3C2410_DMAF_AUTOSTART		(1 << 0)
+#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since S3C PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_MSM_REQ3,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ0,
+	/* END Marker, also used to denote a reserved channel */
+	DMACH_MAX,
+};
+
+static inline bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#include <plat/dma.h>
+
+#endif	/* __S3C_DMA_PL330_H_ */
diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
new file mode 100644
index 0000000..bf5e2a9
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __S3C_PL330_PDATA_H
+#define __S3C_PL330_PDATA_H
+
+#include <plat/s3c-dma-pl330.h>
+
+/*
+ * Every PL330 DMAC has max 32 peripheral interfaces,
+ * of which some may be not be really used in your
+ * DMAC's configuration.
+ * Populate this array of 32 peri i/fs with relevant
+ * channel IDs for used peri i/f and DMACH_MAX for
+ * those unused.
+ *
+ * The platforms just need to provide this info
+ * to the S3C DMA API driver for PL330.
+ */
+struct s3c_pl330_platdata {
+	enum dma_ch peri[32];
+};
+
+#endif /* __S3C_PL330_PDATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
new file mode 100644
index 0000000..e5aba8f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -0,0 +1,71 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C64XX_PLAT_SPI_H
+#define __S3C64XX_PLAT_SPI_H
+
+/**
+ * struct s3c64xx_spi_csinfo - ChipSelect description
+ * @fb_delay: Slave specific feedback delay.
+ *            Refer to FB_CLK_SEL register definition in SPI chapter.
+ * @line: Custom 'identity' of the CS line.
+ * @set_level: CS line control.
+ *
+ * This is per SPI-Slave Chipselect information.
+ * Allocate and initialize one in machine init code and make the
+ * spi_board_info.controller_data point to it.
+ */
+struct s3c64xx_spi_csinfo {
+	u8 fb_delay;
+	unsigned line;
+	void (*set_level)(unsigned line_id, int lvl);
+};
+
+/**
+ * struct s3c64xx_spi_info - SPI Controller defining structure
+ * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
+ * @src_clk_name: Platform name of the corresponding clock.
+ * @num_cs: Number of CS this controller emulates.
+ * @cfg_gpio: Configure pins for this SPI controller.
+ * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
+ * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
+ * @high_speed: If the controller supports HIGH_SPEED_EN bit
+ */
+struct s3c64xx_spi_info {
+	int src_clk_nr;
+	char *src_clk_name;
+
+	int num_cs;
+
+	int (*cfg_gpio)(struct platform_device *pdev);
+
+	/* Following two fields are for future compatibility */
+	int fifo_lvl_mask;
+	int rx_lvl_offset;
+	int high_speed;
+};
+
+/**
+ * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ *				initialization code.
+ * @cntrlr: SPI controller number the configuration is for.
+ * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
+ * @num_cs: Number of elements in the 'cs' array.
+ *
+ * Call this from machine init code for each SPI Controller that
+ * has some chips attached to it.
+ */
+extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+
+#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
new file mode 100644
index 0000000..016674f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -0,0 +1,278 @@
+/* linux/arch/arm/plat-s3c/include/plat/sdhci.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - SDHCI (HSMMC) platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_S3C_SDHCI_H
+#define __PLAT_S3C_SDHCI_H __FILE__
+
+struct platform_device;
+struct mmc_host;
+struct mmc_card;
+struct mmc_ios;
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ * @cfg_card: Configure the interface for a specific card and speed. This
+ *            is necessary the controllers and/or GPIO blocks require the
+ *	      changing of driver-strength and other controls dependant on
+ *	      the card and speed of operation.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+	unsigned int	max_width;
+	unsigned int	host_caps;
+
+	char		**clocks;	/* set of clock sources */
+
+	void	(*cfg_gpio)(struct platform_device *dev, int width);
+	void	(*cfg_card)(struct platform_device *dev,
+			    void __iomem *regbase,
+			    struct mmc_ios *ios,
+			    struct mmc_card *card);
+};
+
+/**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use withe S3C SDHCI device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+
+/* Default platform data, exported so that per-cpu initialisation can
+ * set the correct one when there are more than one cpu type selected.
+*/
+
+extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+
+/* Helper function availablity */
+
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+extern char *s3c64xx_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif  /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+/* S3C6410 SDHCI setup */
+
+extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+					 void __iomem *r,
+					 struct mmc_ios *ios,
+					 struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s3c6410_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6410_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#else
+static inline void s3c6410_default_sdhci0(void) { }
+static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
+
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+
+/* S5PC110 SDHCI setup */
+#ifdef CONFIG_S5PV210_SETUP_SDHCI
+extern char *s5pv210_hsmmc_clksrcs[4];
+
+extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pv210_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pv210_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pv210_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci1(void) { }
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+
+
+
+#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h
new file mode 100644
index 0000000..26fdb22
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ts.h
@@ -0,0 +1,25 @@
+/* arch/arm/plat-samsung/include/plat/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+	void    (*cfg_gpio)(struct platform_device *dev);
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
new file mode 100644
index 0000000..a22a4f2
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -0,0 +1,29 @@
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hsotg_dmamode {
+	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
+	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
+	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+	enum s3c_hsotg_dmamode	dma;
+	unsigned int		is_osc : 1;
+};
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
new file mode 100644
index 0000000..7d6ed72
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -0,0 +1,184 @@
+/* arch/arm/plat-samsung/include/plat/uncompress.h
+ *
+ * Copyright 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_UNCOMPRESS_H
+#define __ASM_PLAT_UNCOMPRESS_H
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+
+static __inline__ void
+uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int
+uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/* we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+*/
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+/* CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+*/
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+
+static void
+arch_decomp_setup(void)
+{
+	/* we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+
+	/* Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-samsung/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
new file mode 100644
index 0000000..7fa1fbe
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/usb-control.h
@@ -0,0 +1,43 @@
+/* arch/arm/plat-samsung/include/plat/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB host port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/arch/arm/plat-samsung/include/plat/wakeup-mask.h
new file mode 100644
index 0000000..43e4acd
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/wakeup-mask.h
@@ -0,0 +1,44 @@
+/* arch/arm/plat-samsung/include/plat/wakeup-mask.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __PLAT_WAKEUP_MASK_H
+#define __PLAT_WAKEUP_MASK_H __file__
+
+/* if no irq yet defined, but still want to mask */
+#define NO_WAKEUP_IRQ (0x90000000)
+
+/**
+ * struct samsung_wakeup_mask - wakeup mask information
+ * @irq: The interrupt associated with this wakeup.
+ * @bit: The bit, as a (1 << bitno) controlling this source.
+ */ 
+struct samsung_wakeup_mask {
+	unsigned int	irq;
+	u32		bit;
+};
+
+/**
+ * samsung_sync_wakemask - sync wakeup mask information for pm
+ * @reg: The register that is used.
+ * @masks: The list of masks to use.
+ * @nr_masks: The number of entries pointed to buy @masks.
+ *
+ * Synchronise the wakeup mask information at suspend time from the list
+ * of interrupts and control bits in @masks. We do this at suspend time
+ * as overriding the relevant irq chips is harder and the register is only
+ * required to be correct before we enter sleep.
+ */
+extern void samsung_sync_wakemask(void __iomem *reg,
+				  struct samsung_wakeup_mask *masks,
+				  int nr_masks);
+
+#endif /* __PLAT_WAKEUP_MASK_H */
diff --git a/arch/arm/plat-s3c/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 54b762a..54b762a 100644
--- a/arch/arm/plat-s3c/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c
index 6790edf..6790edf 100644
--- a/arch/arm/plat-s3c/init.c
+++ b/arch/arm/plat-samsung/init.c
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
new file mode 100644
index 0000000..4f8c102
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -0,0 +1,143 @@
+/* arch/arm/plat-samsung/irq-uart.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Samsung- UART Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-uart.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct s3c_uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct s3c_uart_irq *uirq = desc->handler_data;
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
+{
+	struct irq_desc *desc = irq_to_desc(uirq->parent_irq);
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	desc->handler_data = uirq;
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+/**
+ * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
+ * @irq: The interrupt data for registering
+ * @nr_irqs: The number of interrupt descriptions in @irq.
+ *
+ * Register the UART interrupts specified by @irq including the demuxing
+ * routines. This supports the S3C6400 and newer style of devices.
+ */
+void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
+{
+	for (; nr_irqs > 0; nr_irqs--, irq++)
+		s3c_init_uart_irq(irq);
+}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
new file mode 100644
index 0000000..0270519
--- /dev/null
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -0,0 +1,86 @@
+/* arch/arm/plat-samsung/irq-vic-timer.c
+ *	originally part of arch/arm/plat-s3c64xx/irq.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-timer.h>
+
+static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
+{
+	generic_handle_irq((int)desc->handler_data);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+/**
+ * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
+ * @parent_irq: The parent IRQ on the VIC for the timer.
+ * @timer_irq: The IRQ to be used for the timer.
+ *
+ * Register the necessary IRQ chaining and support for the timer IRQs
+ * chained of the VIC.
+ */
+void __init s3c_init_vic_timer_irq(unsigned int parent_irq,
+				   unsigned int timer_irq)
+{
+	struct irq_desc *desc = irq_to_desc(parent_irq);
+
+	set_irq_chained_handler(parent_irq, s3c_irq_demux_vic_timer);
+
+	set_irq_chip(timer_irq, &s3c_irq_timer);
+	set_irq_handler(timer_irq, handle_level_irq);
+	set_irq_flags(timer_irq, IRQF_VALID);
+
+	desc->handler_data = (void *)timer_irq;
+}
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
new file mode 100644
index 0000000..e4baf76
--- /dev/null
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -0,0 +1,243 @@
+/* linux/arch/arm/plat-s3c/pm-check.c
+ *  originally in linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <plat/pm.h>
+
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_MEM) &&
+		    strcmp(ptr->name, "System RAM") == 0) {
+			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+				  (unsigned long)ptr->start,
+				  (unsigned long)ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)(res->end - res->start)+1;
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+		  (unsigned long)res->start, (unsigned long)res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @vak: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+	void *save_at = phys_to_virt(s3c_sleep_save_phys);
+	unsigned long addr;
+	unsigned long left;
+	void *stkpage;
+	void *ptr;
+	u32 calc;
+
+	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, stkpage, 4096)) {
+			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, save_at, 32*4 )) {
+			S3C_PMDBG("skipping %08lx, has save block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+	if (crcs != NULL)
+		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+	kfree(crcs);
+	crcs = NULL;
+}
+
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
new file mode 100644
index 0000000..7df03f8
--- /dev/null
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -0,0 +1,384 @@
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON	(0x00)
+#define OFFS_DAT	(0x04)
+#define OFFS_UP		(0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon;
+
+	/* GPACON only has one bit per control / data and no PULLUPs.
+	 * GPACON[x] = 0 => Output, 1 => SFN */
+
+	/* first set all SFN bits to SFN */
+
+	gpcon = old_gpcon | gps_gpcon;
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* now set all the other bits */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+	.save	= s3c_gpio_pm_1bit_save,
+	.resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+	return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+	return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+	return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT }  Change DAT first
+ * { IN => SFN }  Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN }  Change CON first, so new data will not glitch
+ * { SFN => IN }  Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ *     state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon = __raw_readl(base + OFFS_CON);
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpcon = chip->pm_save[0];
+	u32 gps_gpdat = chip->pm_save[1];
+	u32 gpcon, old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	/* restore GPIO pull-up settings */
+	__raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+	/* Create a change_mask of all the items that need to have
+	 * their CON value changed before their DAT value, so that
+	 * we minimise the work between the two settings.
+	 */
+
+	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+
+	/* Write the new CON settings */
+
+	gpcon = old_gpcon & ~change_mask;
+	gpcon |= gps_gpcon & change_mask;
+
+	__raw_writel(gpcon, base + OFFS_CON);
+
+	/* Now change any items that require DAT,CON */
+
+	__raw_writel(gps_gpdat, base + OFFS_DAT);
+	__raw_writel(gps_gpcon, base + OFFS_CON);
+
+	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+	.save	= s3c_gpio_pm_2bit_save,
+	.resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8)
+		chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+	u32 old, new, mask;
+	u32 change_mask = 0x0;
+	int nr;
+
+	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+		old = (old_gpcon & mask) >> nr;
+		new = (gps_gpcon & mask) >> nr;
+
+		/* If there is no change, then skip */
+
+		if (old == new)
+			continue;
+
+		/* If both are special function, then skip */
+
+		if (is_sfn(old) && is_sfn(new))
+			continue;
+
+		/* Change is IN => OUT, do not change now */
+
+		if (is_in(old) && is_out(new))
+			continue;
+
+		/* Change is SFN => OUT, do not change now */
+
+		if (is_sfn(old) && is_out(new))
+			continue;
+
+		/* We should now be at the case of IN=>SFN,
+		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+		change_mask |= mask;
+	}
+
+	return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+	void __iomem *con = chip->base + (index * 4);
+	u32 old_gpcon = __raw_readl(con);
+	u32 gps_gpcon = chip->pm_save[index + 1];
+	u32 gpcon, mask;
+
+	mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+	gpcon = old_gpcon & ~mask;
+	gpcon |= gps_gpcon & mask;
+
+	__raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+	void __iomem *base = chip->base;
+	u32 old_gpcon[2];
+	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+	u32 gps_gpdat = chip->pm_save[2];
+
+	/* First, modify the CON settings */
+
+	old_gpcon[0] = 0;
+	old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+	s3c_gpio_pm_4bit_con(chip, 0);
+	if (chip->chip.ngpio > 8) {
+		old_gpcon[0] = __raw_readl(base - 4);
+		s3c_gpio_pm_4bit_con(chip, -1);
+	}
+
+	/* Now change the configurations that require DAT,CON */
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[1], base + OFFS_CON);
+	if (chip->chip.ngpio > 8)
+		__raw_writel(chip->pm_save[0], base - 4);
+
+	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
+	__raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+	if (chip->chip.ngpio > 8) {
+		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[0], old_gpcon[1],
+			  __raw_readl(base - 4),
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+	} else
+		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+			  chip->chip.label, old_gpcon[1],
+			  __raw_readl(base + OFFS_CON),
+			  old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+	.save	= s3c_gpio_pm_4bit_save,
+	.resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->save == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		s3c_pm_save_gpio(ourchip);
+
+		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+			  ourchip->chip.label,
+			  ourchip->pm_save[0],
+			  ourchip->pm_save[1],
+			  ourchip->pm_save[2],
+			  ourchip->pm_save[3]);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+	struct s3c_gpio_pm *pm = ourchip->pm;
+
+	if (pm == NULL || pm->resume == NULL)
+		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+	else
+		pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+	struct s3c_gpio_chip *ourchip;
+	unsigned int gpio_nr;
+
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
+		ourchip = s3c_gpiolib_getchip(gpio_nr);
+		if (!ourchip) {
+			gpio_nr++;
+			continue;
+		}
+
+		s3c_pm_resume_gpio(ourchip);
+
+		gpio_nr += ourchip->chip.ngpio;
+		gpio_nr += CONFIG_S3C_GPIO_SPACE;
+	}
+}
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
new file mode 100644
index 0000000..27cfca5
--- /dev/null
+++ b/arch/arm/plat-samsung/pm.c
@@ -0,0 +1,378 @@
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004-2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-irq.h>
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <mach/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+static inline void s3c_pm_debug_init(void)
+{
+	/* restart uart clocks so we can use them to output */
+	s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
+
+/* Save the UART configurations if we are configured for debug. */
+
+unsigned char pm_uart_udivslot;
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+
+struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+	save->ucon = __raw_readl(regs + S3C2410_UCON);
+	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+	save->umcon = __raw_readl(regs + S3C2410_UMCON);
+	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+}
+
+static void s3c_pm_save_uarts(void)
+{
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+	void __iomem *regs = S3C_VA_UARTx(uart);
+
+	s3c_pm_arch_update_uart(regs, save);
+
+	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
+	__raw_writel(save->ucon,  regs + S3C2410_UCON);
+	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
+	__raw_writel(save->umcon, regs + S3C2410_UMCON);
+	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+	if (pm_uart_udivslot)
+		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+}
+
+static void s3c_pm_restore_uarts(void)
+{
+	struct pm_uart_save *save = uart_save;
+	unsigned int uart;
+
+	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+		s3c_pm_restore_uart(uart, save);
+}
+#else
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		__raw_writel(ptr->val, ptr->reg);
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+				    unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+	static unsigned long regs_save[16];
+
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s(%d)\n", __func__, state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	/* store the physical address of the register recovery block */
+
+	s3c_sleep_save_phys = virt_to_phys(regs_save);
+
+	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
+
+	/* save all necessary core registers not covered by the drivers */
+
+	s3c_pm_save_gpios();
+	s3c_pm_save_uarts();
+	s3c_pm_save_core();
+
+	/* set the irq configuration for wake */
+
+	s3c_pm_configure_extint();
+
+	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	s3c_pm_arch_prepare_irqs();
+
+	/* call cpu specific preparation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	s3c_pm_arch_stop_clocks();
+
+	/* s3c_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state and restores it
+	 * during the resume.  */
+
+	s3c_cpu_save(regs_save);
+
+	/* restore the cpu state using the kernel's cpu init code. */
+
+	cpu_init();
+
+	/* restore the system state */
+
+	s3c_pm_restore_core();
+	s3c_pm_restore_uarts();
+	s3c_pm_restore_gpios();
+
+	s3c_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	s3c_pm_arch_show_resume_irqs();
+
+	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+	/* LEDs should now be 1110 */
+	s3c_pm_debug_smdkled(1 << 1, 0);
+
+	s3c_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	S3C_PMDBG("S3C PM Resume (post-restore)\n");
+	return 0;
+}
+
+/* callback from assembly code */
+void s3c_pm_cb_flushcache(void)
+{
+	flush_cache_all();
+}
+
+static int s3c_pm_prepare(void)
+{
+	/* prepare check area if configured */
+
+	s3c_pm_check_prepare();
+	return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static struct platform_suspend_ops s3c_pm_ops = {
+	.enter		= s3c_pm_enter,
+	.prepare	= s3c_pm_prepare,
+	.finish		= s3c_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+	suspend_set_ops(&s3c_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
new file mode 100644
index 0000000..46c9381
--- /dev/null
+++ b/arch/arm/plat-samsung/pwm-clock.c
@@ -0,0 +1,455 @@
+/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Copyright (c) 2007, 2008 Ben Dooks
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/log2.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+#include <plat/regs-timer.h>
+#include <mach/pwm-clock.h>
+
+/* Each of the timers 0 through 5 go through the following
+ * clock tree, with the inputs depending on the timers.
+ *
+ * pclk ---- [ prescaler 0 ] -+---> timer 0
+ *			      +---> timer 1
+ *
+ * pclk ---- [ prescaler 1 ] -+---> timer 2
+ *			      +---> timer 3
+ *			      \---> timer 4
+ *
+ * Which are fed into the timers as so:
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 0
+ * tclk 0 ------------------------------/
+ *
+ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 1
+ * tclk 0 ------------------------------/
+ *
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 2
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
+ *				       [mux] -> timer 3
+ * tclk 1 ------------------------------/
+ *
+ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
+ *				       [mux] -> timer 4
+ * tclk 1 ------------------------------/
+ *
+ * Since the mux and the divider are tied together in the
+ * same register space, it is impossible to set the parent
+ * and the rate at the same time. To avoid this, we add an
+ * intermediate 'prescaled-and-divided' clock to select
+ * as the parent for the timer input clock called tdiv.
+ *
+ * prescaled clk --> pwm-tdiv ---\
+ *                             [ mux ] --> timer X
+ * tclk -------------------------/
+*/
+
+static struct clk clk_timer_scaler[];
+
+static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
+{
+	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk == &clk_timer_scaler[1]) {
+		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
+	}
+
+	return clk_get_rate(clk->parent) / (tcfg0 + 1);
+}
+
+static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
+					       unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor = parent_rate / rate;
+
+	if (divisor > 256)
+		divisor = 256;
+	else if (divisor < 2)
+		divisor = 2;
+
+	return parent_rate / divisor;
+}
+
+static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
+	unsigned long tcfg0;
+	unsigned long divisor;
+	unsigned long flags;
+
+	divisor = clk_get_rate(clk->parent) / round;
+	divisor--;
+
+	local_irq_save(flags);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+
+	if (clk == &clk_timer_scaler[1]) {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
+		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
+	} else {
+		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
+		tcfg0 |= divisor;
+	}
+
+	__raw_writel(tcfg0, S3C2410_TCFG0);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_pwm_scaler_ops = {
+	.get_rate	= clk_pwm_scaler_get_rate,
+	.set_rate	= clk_pwm_scaler_set_rate,
+	.round_rate	= clk_pwm_scaler_round_rate,
+};
+
+static struct clk clk_timer_scaler[] = {
+	[0]	= {
+		.name		= "pwm-scaler0",
+		.id		= -1,
+		.ops		= &clk_pwm_scaler_ops,
+	},
+	[1]	= {
+		.name		= "pwm-scaler1",
+		.id		= -1,
+		.ops		= &clk_pwm_scaler_ops,
+	},
+};
+
+static struct clk clk_timer_tclk[] = {
+	[0]	= {
+		.name		= "pwm-tclk0",
+		.id		= -1,
+	},
+	[1]	= {
+		.name		= "pwm-tclk1",
+		.id		= -1,
+	},
+};
+
+struct pwm_tdiv_clk {
+	struct clk	clk;
+	unsigned int	divisor;
+};
+
+static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
+{
+	return container_of(clk, struct pwm_tdiv_clk, clk);
+}
+
+static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (pwm_cfg_src_is_tclk(tcfg1))
+		divisor = to_tdiv(clk)->divisor;
+	else
+		divisor = tcfg_to_divisor(tcfg1);
+
+	return clk_get_rate(clk->parent) / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	unsigned long parent_rate;
+	unsigned long divisor;
+
+	parent_rate = clk_get_rate(clk->parent);
+	divisor = parent_rate / rate;
+
+	if (divisor <= 1 && pwm_tdiv_has_div1())
+		divisor = 1;
+	else if (divisor <= 2)
+		divisor = 2;
+	else if (divisor <= 4)
+		divisor = 4;
+	else if (divisor <= 8)
+		divisor = 8;
+	else
+		divisor = 16;
+
+	return parent_rate / divisor;
+}
+
+static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
+{
+	return pwm_tdiv_div_bits(divclk->divisor);
+}
+
+static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long bits = clk_pwm_tdiv_bits(divclk);
+	unsigned long flags;
+	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	tcfg1 |= bits << shift;
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+}
+
+static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long divisor;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	rate = clk_round_rate(clk, rate);
+	divisor = parent_rate / rate;
+
+	if (divisor > 16)
+		return -EINVAL;
+
+	divclk->divisor = divisor;
+
+	/* Update the current MUX settings if we are currently
+	 * selected as the clock source for this clock. */
+
+	if (!pwm_cfg_src_is_tclk(tcfg1))
+		clk_pwm_tdiv_update(divclk);
+
+	return 0;
+}
+
+static struct clk_ops clk_tdiv_ops = {
+	.get_rate	= clk_pwm_tdiv_get_rate,
+	.set_rate	= clk_pwm_tdiv_set_rate,
+	.round_rate	= clk_pwm_tdiv_round_rate,
+};
+
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
+	[0]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
+		},
+	},
+	[1]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[0],
+		}
+	},
+	[2]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+	[3]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+	[4]	= {
+		.clk	= {
+			.name	= "pwm-tdiv",
+			.ops	= &clk_tdiv_ops,
+			.parent	= &clk_timer_scaler[1],
+		},
+	},
+};
+
+static int __init clk_pwm_tdiv_register(unsigned int id)
+{
+	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	divclk->clk.id = id;
+	divclk->divisor = tcfg_to_divisor(tcfg1);
+
+	return s3c24xx_register_clock(&divclk->clk);
+}
+
+static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
+{
+	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
+}
+
+static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
+{
+	return &clk_timer_tdiv[id].clk;
+}
+
+static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned int id = clk->id;
+	unsigned long tcfg1;
+	unsigned long flags;
+	unsigned long bits;
+	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
+
+	if (parent == s3c24xx_pwmclk_tclk(id))
+		bits = S3C_TCFG1_MUX_TCLK << shift;
+	else if (parent == s3c24xx_pwmclk_tdiv(id))
+		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	local_irq_save(flags);
+
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
+	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static struct clk_ops clk_tin_ops = {
+	.set_parent	= clk_pwm_tin_set_parent,
+};
+
+static struct clk clk_tin[] = {
+	[0]	= {
+		.name	= "pwm-tin",
+		.id	= 0,
+		.ops	= &clk_tin_ops,
+	},
+	[1]	= {
+		.name	= "pwm-tin",
+		.id	= 1,
+		.ops	= &clk_tin_ops,
+	},
+	[2]	= {
+		.name	= "pwm-tin",
+		.id	= 2,
+		.ops	= &clk_tin_ops,
+	},
+	[3]	= {
+		.name	= "pwm-tin",
+		.id	= 3,
+		.ops	= &clk_tin_ops,
+	},
+	[4]	= {
+		.name	= "pwm-tin",
+		.id	= 4,
+		.ops	= &clk_tin_ops,
+	},
+};
+
+static __init int clk_pwm_tin_register(struct clk *pwm)
+{
+	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
+	unsigned int id = pwm->id;
+
+	struct clk *parent;
+	int ret;
+
+	ret = s3c24xx_register_clock(pwm);
+	if (ret < 0)
+		return ret;
+
+	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
+	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
+
+	if (pwm_cfg_src_is_tclk(tcfg1))
+		parent = s3c24xx_pwmclk_tclk(id);
+	else
+		parent = s3c24xx_pwmclk_tdiv(id);
+
+	return clk_set_parent(pwm, parent);
+}
+
+/**
+ * s3c_pwmclk_init() - initialise pwm clocks
+ *
+ * Initialise and register the clocks which provide the inputs for the
+ * pwm timer blocks.
+ *
+ * Note, this call is required by the time core, so must be called after
+ * the base clocks are added and before any of the initcalls are run.
+ */
+__init void s3c_pwmclk_init(void)
+{
+	struct clk *clk_timers;
+	unsigned int clk;
+	int ret;
+
+	clk_timers = clk_get(NULL, "timers");
+	if (IS_ERR(clk_timers)) {
+		printk(KERN_ERR "%s: no parent clock\n", __func__);
+		return;
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
+		clk_timer_scaler[clk].parent = clk_timers;
+
+	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
+	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
+		ret = clk_pwm_tdiv_register(clk);
+
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
+			return;
+		}
+	}
+
+	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
+		ret = clk_pwm_tin_register(&clk_tin[clk]);
+		if (ret < 0) {
+			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
+			return;
+		}
+	}
+}
diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c
new file mode 100644
index 0000000..2eeb49f
--- /dev/null
+++ b/arch/arm/plat-samsung/pwm.c
@@ -0,0 +1,446 @@
+/* arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C series PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+
+struct pwm_device {
+	struct list_head	 list;
+	struct platform_device	*pdev;
+
+	struct clk		*clk_div;
+	struct clk		*clk;
+	const char		*label;
+
+	unsigned int		 period_ns;
+	unsigned int		 duty_ns;
+
+	unsigned char		 tcon_base;
+	unsigned char		 running;
+	unsigned char		 use_count;
+	unsigned char		 pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+	return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, list) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count = 1;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+	mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 1;
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long period;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned long tcnt;
+	long tcmp;
+
+	/* We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits. */
+
+	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	if (period_ns == pwm->period_ns &&
+	    duty_ns == pwm->duty_ns)
+		return 0;
+
+	/* The TCMP and TCNT can be read without a lock, they're not
+	 * shared between the timers. */
+
+	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+	period = NS_IN_HZ / period_ns;
+
+	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+		duty_ns, period_ns, period);
+
+	/* Check to see if we are changing the clock rate of the PWM */
+
+	if (pwm->period_ns != period_ns) {
+		if (pwm_is_tdiv(pwm)) {
+			tin_rate = pwm_calc_tin(pwm, period);
+			clk_set_rate(pwm->clk_div, tin_rate);
+		} else
+			tin_rate = clk_get_rate(pwm->clk);
+
+		pwm->period_ns = period_ns;
+
+		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NS_IN_HZ / tin_rate;
+		tcnt = period_ns / tin_ns;
+	} else
+		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+	/* Note, counters count down */
+
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+	/* the pwm hw only checks the compare register after a decrement,
+	   so the pin never toggles if tcmp = tcnt */
+	if (tcmp == tcnt)
+		tcmp--;
+
+	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+	if (tcmp < 0)
+		tcmp = 0;
+
+	/* Update the PWM register block. */
+
+	local_irq_save(flags);
+
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_manulupdate(pwm);
+	tcon |= pwm_tcon_autoreload(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	tcon &= ~pwm_tcon_manulupdate(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->list, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_device *pwm;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned int id = pdev->id;
+	int ret;
+
+	if (id == 4) {
+		dev_err(dev, "TIMER4 is currently not supported\n");
+		return -ENXIO;
+	}
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(dev, "failed to allocate pwm_device\n");
+		return -ENOMEM;
+	}
+
+	pwm->pdev = pdev;
+	pwm->pwm_id = id;
+
+	/* calculate base of control bits in TCON */
+	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+	pwm->clk = clk_get(dev, "pwm-tin");
+	if (IS_ERR(pwm->clk)) {
+		dev_err(dev, "failed to get pwm tin clk\n");
+		ret = PTR_ERR(pwm->clk);
+		goto err_alloc;
+	}
+
+	pwm->clk_div = clk_get(dev, "pwm-tdiv");
+	if (IS_ERR(pwm->clk_div)) {
+		dev_err(dev, "failed to get pwm tdiv clk\n");
+		ret = PTR_ERR(pwm->clk_div);
+		goto err_clk_tin;
+	}
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+
+	ret = pwm_register(pwm);
+	if (ret) {
+		dev_err(dev, "failed to register pwm\n");
+		goto err_clk_tdiv;
+	}
+
+	pwm_dbg(pwm, "config bits %02x\n",
+		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+		 clk_get_rate(pwm->clk),
+		 clk_get_rate(pwm->clk_div),
+		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+ err_clk_tdiv:
+	clk_put(pwm->clk_div);
+
+ err_clk_tin:
+	clk_put(pwm->clk);
+
+ err_alloc:
+	kfree(pwm);
+	return ret;
+}
+
+static int __devexit s3c_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	clk_put(pwm->clk_div);
+	clk_put(pwm->clk);
+	kfree(pwm);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	/* No one preserve these values during suspend so reset them
+	 * Otherwise driver leaves PWM unconfigured if same values
+	 * passed to pwm_config
+	 */
+	pwm->period_ns = 0;
+	pwm->duty_ns = 0;
+
+	return 0;
+}
+
+static int s3c_pwm_resume(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+	unsigned long tcon;
+
+	/* Restore invertion */
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	return 0;
+}
+
+#else
+#define s3c_pwm_suspend NULL
+#define s3c_pwm_resume NULL
+#endif
+
+static struct platform_driver s3c_pwm_driver = {
+	.driver		= {
+		.name	= "s3c24xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_pwm_probe,
+	.remove		= __devexit_p(s3c_pwm_remove),
+	.suspend	= s3c_pwm_suspend,
+	.resume		= s3c_pwm_resume,
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = platform_driver_register(&s3c_pwm_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
new file mode 100644
index 0000000..a91305a
--- /dev/null
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -0,0 +1,1224 @@
+/* linux/arch/arm/plat-samsung/s3c-pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/pl330.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+/**
+ * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
+ * @busy_chan: Number of channels currently busy.
+ * @peri: List of IDs of peripherals this DMAC can work with.
+ * @node: To attach to the global list of DMACs.
+ * @pi: PL330 configuration info for the DMAC.
+ * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ */
+struct s3c_pl330_dmac {
+	unsigned		busy_chan;
+	enum dma_ch		*peri;
+	struct list_head	node;
+	struct pl330_info	*pi;
+	struct kmem_cache	*kmcache;
+};
+
+/**
+ * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
+ * @token: Xfer ID provided by the client.
+ * @node: To attach to the list of xfers on a channel.
+ * @px: Xfer for PL330 core.
+ * @chan: Owner channel of this xfer.
+ */
+struct s3c_pl330_xfer {
+	void			*token;
+	struct list_head	node;
+	struct pl330_xfer	px;
+	struct s3c_pl330_chan	*chan;
+};
+
+/**
+ * struct s3c_pl330_chan - Logical channel to communicate with
+ * 	a Physical peripheral.
+ * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
+ * 	NULL if the channel is available to be acquired.
+ * @id: ID of the peripheral that this channel can communicate with.
+ * @options: Options specified by the client.
+ * @sdaddr: Address provided via s3c2410_dma_devconfig.
+ * @node: To attach to the global list of channels.
+ * @lrq: Pointer to the last submitted pl330_req to PL330 core.
+ * @xfer_list: To manage list of xfers enqueued.
+ * @req: Two requests to communicate with the PL330 engine.
+ * @callback_fn: Callback function to the client.
+ * @rqcfg: Channel configuration for the xfers.
+ * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @dmac: Pointer to the DMAC that manages this channel, NULL if the
+ * 	channel is available to be acquired.
+ * @client: Client of this channel. NULL if the
+ * 	channel is available to be acquired.
+ */
+struct s3c_pl330_chan {
+	void				*pl330_chan_id;
+	enum dma_ch			id;
+	unsigned int			options;
+	unsigned long			sdaddr;
+	struct list_head		node;
+	struct pl330_req		*lrq;
+	struct list_head		xfer_list;
+	struct pl330_req		req[2];
+	s3c2410_dma_cbfn_t		callback_fn;
+	struct pl330_reqcfg		rqcfg;
+	struct s3c_pl330_xfer		*xfer_head;
+	struct s3c_pl330_dmac		*dmac;
+	struct s3c2410_dma_client	*client;
+};
+
+/* All DMACs in the platform */
+static LIST_HEAD(dmac_list);
+
+/* All channels to peripherals in the platform */
+static LIST_HEAD(chan_list);
+
+/*
+ * Since we add resources(DMACs and Channels) to the global pool,
+ * we need to guard access to the resources using a global lock
+ */
+static DEFINE_SPINLOCK(res_lock);
+
+/* Returns the channel with ID 'id' in the chan_list */
+static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch;
+
+	list_for_each_entry(ch, &chan_list, node)
+		if (ch->id == id)
+			return ch;
+
+	return NULL;
+}
+
+/* Allocate a new channel with ID 'id' and add to chan_list */
+static void chan_add(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+
+	/* Return if the channel already exists */
+	if (ch)
+		return;
+
+	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
+	/* Return silently to work with other channels */
+	if (!ch)
+		return;
+
+	ch->id = id;
+	ch->dmac = NULL;
+
+	list_add_tail(&ch->node, &chan_list);
+}
+
+/* If the channel is not yet acquired by any client */
+static bool chan_free(struct s3c_pl330_chan *ch)
+{
+	if (!ch)
+		return false;
+
+	/* Channel points to some DMAC only when it's acquired */
+	return ch->dmac ? false : true;
+}
+
+/*
+ * Returns 0 is peripheral i/f is invalid or not present on the dmac.
+ * Index + 1, otherwise.
+ */
+static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
+{
+	enum dma_ch *id = dmac->peri;
+	int i;
+
+	/* Discount invalid markers */
+	if (ch_id == DMACH_MAX)
+		return 0;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch_id)
+			return i + 1;
+
+	return 0;
+}
+
+/* If all channel threads of the DMAC are busy */
+static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
+{
+	struct pl330_info *pi = dmac->pi;
+
+	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
+}
+
+/*
+ * Returns the number of free channels that
+ * can be handled by this dmac only.
+ */
+static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
+{
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	struct s3c_pl330_chan *ch;
+	unsigned found, count = 0;
+	enum dma_ch p;
+	int i;
+
+	for (i = 0; i < PL330_MAX_PERI; i++) {
+		p = id[i];
+		ch = id_to_chan(p);
+
+		if (p == DMACH_MAX || !chan_free(ch))
+			continue;
+
+		found = 0;
+		list_for_each_entry(d, &dmac_list, node) {
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				found = 1;
+				break;
+			}
+		}
+		if (!found)
+			count++;
+	}
+
+	return count;
+}
+
+/*
+ * Measure of suitability of 'dmac' handling 'ch'
+ *
+ * 0 indicates 'dmac' can not handle 'ch' either
+ * because it is not supported by the hardware or
+ * because all dmac channels are currently busy.
+ *
+ * >0 vlaue indicates 'dmac' has the capability.
+ * The bigger the value the more suitable the dmac.
+ */
+#define MAX_SUIT	UINT_MAX
+#define MIN_SUIT	0
+
+static unsigned suitablility(struct s3c_pl330_dmac *dmac,
+		struct s3c_pl330_chan *ch)
+{
+	struct pl330_info *pi = dmac->pi;
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	unsigned s;
+	int i;
+
+	s = MIN_SUIT;
+	/* If all the DMAC channel threads are busy */
+	if (dmac_busy(dmac))
+		return s;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch->id)
+			break;
+
+	/* If the 'dmac' can't talk to 'ch' */
+	if (i == PL330_MAX_PERI)
+		return s;
+
+	s = MAX_SUIT;
+	list_for_each_entry(d, &dmac_list, node) {
+		/*
+		 * If some other dmac can talk to this
+		 * peri and has some channel free.
+		 */
+		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
+			s = 0;
+			break;
+		}
+	}
+	if (s)
+		return s;
+
+	s = 100;
+
+	/* Good if free chans are more, bad otherwise */
+	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
+
+	return s;
+}
+
+/* More than one DMAC may have capability to transfer data with the
+ * peripheral. This function assigns most suitable DMAC to manage the
+ * channel and hence communicate with the peripheral.
+ */
+static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *d, *dmac = NULL;
+	unsigned sn, sl = MIN_SUIT;
+
+	list_for_each_entry(d, &dmac_list, node) {
+		sn = suitablility(d, ch);
+
+		if (sn == MAX_SUIT)
+			return d;
+
+		if (sn > sl)
+			dmac = d;
+	}
+
+	return dmac;
+}
+
+/* Acquire the channel for peripheral 'id' */
+static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct s3c_pl330_dmac *dmac;
+
+	/* If the channel doesn't exist or is already acquired */
+	if (!ch || !chan_free(ch)) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac = map_chan_to_dmac(ch);
+	/* If couldn't map */
+	if (!dmac) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac->busy_chan++;
+	ch->dmac = dmac;
+
+acq_exit:
+	return ch;
+}
+
+/* Delete xfer from the queue */
+static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
+{
+	struct s3c_pl330_xfer *t;
+	struct s3c_pl330_chan *ch;
+	int found;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Make sure xfer is in the queue */
+	found = 0;
+	list_for_each_entry(t, &ch->xfer_list, node)
+		if (t == xfer) {
+			found = 1;
+			break;
+		}
+
+	if (!found)
+		return;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		t = list_entry(ch->xfer_list.next,
+				struct s3c_pl330_xfer, node);
+	else
+		t = list_entry(xfer->node.next,
+				struct s3c_pl330_xfer, node);
+
+	/* If there was only one node left */
+	if (t == xfer)
+		ch->xfer_head = NULL;
+	else if (ch->xfer_head == xfer)
+		ch->xfer_head = t;
+
+	list_del(&xfer->node);
+}
+
+/* Provides pointer to the next xfer in the queue.
+ * If CIRCULAR option is set, the list is left intact,
+ * otherwise the xfer is removed from the list.
+ * Forced delete 'pluck' can be set to override the CIRCULAR option.
+ */
+static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
+		int pluck)
+{
+	struct s3c_pl330_xfer *xfer = ch->xfer_head;
+
+	if (!xfer)
+		return NULL;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		ch->xfer_head = list_entry(ch->xfer_list.next,
+					struct s3c_pl330_xfer, node);
+	else
+		ch->xfer_head = list_entry(xfer->node.next,
+					struct s3c_pl330_xfer, node);
+
+	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		del_from_queue(xfer);
+
+	return xfer;
+}
+
+static inline void add_to_queue(struct s3c_pl330_chan *ch,
+		struct s3c_pl330_xfer *xfer, int front)
+{
+	struct pl330_xfer *xt;
+
+	/* If queue empty */
+	if (ch->xfer_head == NULL)
+		ch->xfer_head = xfer;
+
+	xt = &ch->xfer_head->px;
+	/* If the head already submitted (CIRCULAR head) */
+	if (ch->options & S3C2410_DMAF_CIRCULAR &&
+		(xt == ch->req[0].x || xt == ch->req[1].x))
+		ch->xfer_head = xfer;
+
+	/* If this is a resubmission, it should go at the head */
+	if (front) {
+		ch->xfer_head = xfer;
+		list_add(&xfer->node, &ch->xfer_list);
+	} else {
+		list_add_tail(&xfer->node, &ch->xfer_list);
+	}
+}
+
+static inline void _finish_off(struct s3c_pl330_xfer *xfer,
+		enum s3c2410_dma_buffresult res, int ffree)
+{
+	struct s3c_pl330_chan *ch;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Do callback */
+	if (ch->callback_fn)
+		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
+
+	/* Force Free or if buffer is not needed anymore */
+	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		kmem_cache_free(ch->dmac->kmcache, xfer);
+}
+
+static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
+		struct pl330_req *r)
+{
+	struct s3c_pl330_xfer *xfer;
+	int ret = 0;
+
+	/* If already submitted */
+	if (r->x)
+		return 0;
+
+	xfer = get_from_queue(ch, 0);
+	if (xfer) {
+		r->x = &xfer->px;
+
+		/* Use max bandwidth for M<->M xfers */
+		if (r->rqtype == MEMTOMEM) {
+			struct pl330_info *pi = xfer->chan->dmac->pi;
+			int burst = 1 << ch->rqcfg.brst_size;
+			u32 bytes = r->x->bytes;
+			int bl;
+
+			bl = pi->pcfg.data_bus_width / 8;
+			bl *= pi->pcfg.data_buf_dep;
+			bl /= burst;
+
+			/* src/dst_burst_len can't be more than 16 */
+			if (bl > 16)
+				bl = 16;
+
+			while (bl > 1) {
+				if (!(bytes % (bl * burst)))
+					break;
+				bl--;
+			}
+
+			ch->rqcfg.brst_len = bl;
+		} else {
+			ch->rqcfg.brst_len = 1;
+		}
+
+		ret = pl330_submit_req(ch->pl330_chan_id, r);
+
+		/* If submission was successful */
+		if (!ret) {
+			ch->lrq = r; /* latest submitted req */
+			return 0;
+		}
+
+		r->x = NULL;
+
+		/* If both of the PL330 ping-pong buffers filled */
+		if (ret == -EAGAIN) {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			/* Queue back again */
+			add_to_queue(ch, xfer, 1);
+			ret = 0;
+		} else {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			_finish_off(xfer, S3C2410_RES_ERR, 0);
+		}
+	}
+
+	return ret;
+}
+
+static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
+	struct pl330_req *r, enum pl330_op_err err)
+{
+	unsigned long flags;
+	struct s3c_pl330_xfer *xfer;
+	struct pl330_xfer *xl = r->x;
+	enum s3c2410_dma_buffresult res;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	r->x = NULL;
+
+	s3c_pl330_submit(ch, r);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	/* Map result to S3C DMA API */
+	if (err == PL330_ERR_NONE)
+		res = S3C2410_RES_OK;
+	else if (err == PL330_ERR_ABORT)
+		res = S3C2410_RES_ABORT;
+	else
+		res = S3C2410_RES_ERR;
+
+	/* If last request had some xfer */
+	if (xl) {
+		xfer = container_of(xl, struct s3c_pl330_xfer, px);
+		_finish_off(xfer, res, 0);
+	} else {
+		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
+			__func__, __LINE__);
+	}
+}
+
+static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[0]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[1]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+/* Release an acquired channel */
+static void chan_release(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *dmac;
+
+	if (chan_free(ch))
+		return;
+
+	dmac = ch->dmac;
+	ch->dmac = NULL;
+	dmac->busy_chan--;
+}
+
+int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
+{
+	struct s3c_pl330_xfer *xfer;
+	enum pl330_chan_op pl330op;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int idx, ret;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto ctrl_exit;
+	}
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		/* Make sure both reqs are enqueued */
+		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+		s3c_pl330_submit(ch, &ch->req[idx]);
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+		pl330op = PL330_OP_START;
+		break;
+
+	case S3C2410_DMAOP_STOP:
+		pl330op = PL330_OP_ABORT;
+		break;
+
+	case S3C2410_DMAOP_FLUSH:
+		pl330op = PL330_OP_FLUSH;
+		break;
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_TIMEOUT:
+	case S3C2410_DMAOP_STARTED:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+
+	default:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return -EINVAL;
+	}
+
+	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
+
+	if (pl330op == PL330_OP_START) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return ret;
+	}
+
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	/* Abort the current xfer */
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		/* Drop xfer during FLUSH */
+		if (pl330op == PL330_OP_FLUSH)
+			del_from_queue(xfer);
+
+		ch->req[idx].x = NULL;
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT,
+				pl330op == PL330_OP_FLUSH ? 1 : 0);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Flush the whole queue */
+	if (pl330op == PL330_OP_FLUSH) {
+
+		if (ch->req[1 - idx].x) {
+			xfer = container_of(ch->req[1 - idx].x,
+					struct s3c_pl330_xfer, px);
+
+			del_from_queue(xfer);
+
+			ch->req[1 - idx].x = NULL;
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+		}
+
+		/* Finish off the remaining in the queue */
+		xfer = ch->xfer_head;
+		while (xfer) {
+
+			del_from_queue(xfer);
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+
+			xfer = ch->xfer_head;
+		}
+	}
+
+ctrl_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+int s3c2410_dma_enqueue(enum dma_ch id, void *token,
+			dma_addr_t addr, int size)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int idx, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	/* Error if invalid or free channel */
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	/* Error if size is unaligned */
+	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
+	if (!xfer) {
+		ret = -ENOMEM;
+		goto enq_exit;
+	}
+
+	xfer->token = token;
+	xfer->chan = ch;
+	xfer->px.bytes = size;
+	xfer->px.next = NULL; /* Single request */
+
+	/* For S3C DMA API, direction is always fixed for all xfers */
+	if (ch->req[0].rqtype == MEMTODEV) {
+		xfer->px.src_addr = addr;
+		xfer->px.dst_addr = ch->sdaddr;
+	} else {
+		xfer->px.src_addr = ch->sdaddr;
+		xfer->px.dst_addr = addr;
+	}
+
+	add_to_queue(ch, xfer, 0);
+
+	/* Try submitting on either request */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (!ch->req[idx].x)
+		s3c_pl330_submit(ch, &ch->req[idx]);
+	else
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	if (ch->options & S3C2410_DMAF_AUTOSTART)
+		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
+
+	return 0;
+
+enq_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+int s3c2410_dma_request(enum dma_ch id,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c_pl330_dmac *dmac;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = chan_acquire(id);
+	if (!ch) {
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	dmac = ch->dmac;
+
+	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
+	if (!ch->pl330_chan_id) {
+		chan_release(ch);
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	ch->client = client;
+	ch->options = 0; /* Clear any option */
+	ch->callback_fn = NULL; /* Clear any callback */
+	ch->lrq = NULL;
+
+	ch->rqcfg.brst_size = 2; /* Default word size */
+	ch->rqcfg.swap = SWAP_NO;
+	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.privileged = 0;
+	ch->rqcfg.insnaccess = 0;
+
+	/* Set invalid direction */
+	ch->req[0].rqtype = DEVTODEV;
+	ch->req[1].rqtype = ch->req[0].rqtype;
+
+	ch->req[0].cfg = &ch->rqcfg;
+	ch->req[1].cfg = ch->req[0].cfg;
+
+	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
+	ch->req[1].peri = ch->req[0].peri;
+
+	ch->req[0].token = &ch->req[0];
+	ch->req[0].xfer_cb = s3c_pl330_rq0;
+	ch->req[1].token = &ch->req[1];
+	ch->req[1].xfer_cb = s3c_pl330_rq1;
+
+	ch->req[0].x = NULL;
+	ch->req[1].x = NULL;
+
+	/* Reset xfer list */
+	INIT_LIST_HEAD(&ch->xfer_list);
+	ch->xfer_head = NULL;
+
+req_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int ret = 0;
+	unsigned idx;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		goto free_exit;
+
+	/* Refuse if someone else wanted to free the channel */
+	if (ch->client != client) {
+		ret = -EBUSY;
+		goto free_exit;
+	}
+
+	/* Stop any active xfer, Flushe the queue and do callbacks */
+	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
+
+	/* Abort the submitted requests */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	if (ch->req[1 - idx].x) {
+		xfer = container_of(ch->req[1 - idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[1 - idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Pluck and Abort the queued requests in order */
+	do {
+		xfer = get_from_queue(ch, 1);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	} while (xfer);
+
+	ch->client = NULL;
+
+	pl330_release_channel(ch->pl330_chan_id);
+
+	ch->pl330_chan_id = NULL;
+
+	chan_release(ch);
+
+free_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+int s3c2410_dma_config(enum dma_ch id, int xferunit)
+{
+	struct s3c_pl330_chan *ch;
+	struct pl330_info *pi;
+	unsigned long flags;
+	int i, dbwidth, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	pi = ch->dmac->pi;
+	dbwidth = pi->pcfg.data_bus_width / 8;
+
+	/* Max size of xfer can be pcfg.data_bus_width */
+	if (xferunit > dbwidth) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	i = 0;
+	while (xferunit != (1 << i))
+		i++;
+
+	/* If valid value */
+	if (xferunit == (1 << i))
+		ch->rqcfg.brst_size = i;
+	else
+		ret = -EINVAL;
+
+cfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+/* Options that are supported by this driver */
+#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
+
+int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
+		ret = -EINVAL;
+	else
+		ch->options = options;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		ret = -EINVAL;
+	else
+		ch->callback_fn = rtn;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
+			  unsigned long address)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	switch (source) {
+	case S3C2410_DMASRC_HW: /* P->M */
+		ch->req[0].rqtype = DEVTOMEM;
+		ch->req[1].rqtype = DEVTOMEM;
+		ch->rqcfg.src_inc = 0;
+		ch->rqcfg.dst_inc = 1;
+		break;
+	case S3C2410_DMASRC_MEM: /* M->P */
+		ch->req[0].rqtype = MEMTODEV;
+		ch->req[1].rqtype = MEMTODEV;
+		ch->rqcfg.src_inc = 1;
+		ch->rqcfg.dst_inc = 0;
+		break;
+	default:
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	ch->sdaddr = address;
+
+devcfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct pl330_chanstatus status;
+	int ret;
+
+	if (!ch || chan_free(ch))
+		return -EINVAL;
+
+	ret = pl330_chan_status(ch->pl330_chan_id, &status);
+	if (ret < 0)
+		return ret;
+
+	*src = status.src_addr;
+	*dst = status.dst_addr;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+	if (pl330_update(data))
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static int pl330_probe(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *s3c_pl330_dmac;
+	struct s3c_pl330_platdata *pl330pd;
+	struct pl330_info *pl330_info;
+	struct resource *res;
+	int i, ret, irq;
+
+	pl330pd = pdev->dev.platform_data;
+
+	/* Can't do without the list of _32_ peripherals */
+	if (!pl330pd || !pl330pd->peri) {
+		dev_err(&pdev->dev, "platform data missing!\n");
+		return -ENODEV;
+	}
+
+	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
+	if (!pl330_info)
+		return -ENOMEM;
+
+	pl330_info->pl330_data = NULL;
+	pl330_info->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto probe_err1;
+	}
+
+	request_mem_region(res->start, resource_size(res), pdev->name);
+
+	pl330_info->base = ioremap(res->start, resource_size(res));
+	if (!pl330_info->base) {
+		ret = -ENXIO;
+		goto probe_err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto probe_err3;
+	}
+
+	ret = request_irq(irq, pl330_irq_handler, 0,
+			dev_name(&pdev->dev), pl330_info);
+	if (ret)
+		goto probe_err4;
+
+	ret = pl330_add(pl330_info);
+	if (ret)
+		goto probe_err5;
+
+	/* Allocate a new DMAC */
+	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
+	if (!s3c_pl330_dmac) {
+		ret = -ENOMEM;
+		goto probe_err6;
+	}
+
+	/* Hook the info */
+	s3c_pl330_dmac->pi = pl330_info;
+
+	/* No busy channels */
+	s3c_pl330_dmac->busy_chan = 0;
+
+	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
+				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
+
+	if (!s3c_pl330_dmac->kmcache) {
+		ret = -ENOMEM;
+		goto probe_err7;
+	}
+
+	/* Get the list of peripherals */
+	s3c_pl330_dmac->peri = pl330pd->peri;
+
+	/* Attach to the list of DMACs */
+	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
+
+	/* Create a channel for each peripheral in the DMAC
+	 * that is, if it doesn't already exist
+	 */
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
+			chan_add(s3c_pl330_dmac->peri[i]);
+
+	printk(KERN_INFO
+		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
+	printk(KERN_INFO
+		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+		pl330_info->pcfg.data_buf_dep,
+		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
+		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
+
+	return 0;
+
+probe_err7:
+	kfree(s3c_pl330_dmac);
+probe_err6:
+	pl330_del(pl330_info);
+probe_err5:
+	free_irq(irq, pl330_info);
+probe_err4:
+probe_err3:
+	iounmap(pl330_info->base);
+probe_err2:
+	release_mem_region(res->start, resource_size(res));
+probe_err1:
+	kfree(pl330_info);
+
+	return ret;
+}
+
+static int pl330_remove(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *dmac, *d;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int del, found;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	found = 0;
+	list_for_each_entry(d, &dmac_list, node)
+		if (d->pi->dev == &pdev->dev) {
+			found = 1;
+			break;
+		}
+
+	if (!found) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+	}
+
+	dmac = d;
+
+	/* Remove all Channels that are managed only by this DMAC */
+	list_for_each_entry(ch, &chan_list, node) {
+
+		/* Only channels that are handled by this DMAC */
+		if (iface_of_dmac(dmac, ch->id))
+			del = 1;
+		else
+			continue;
+
+		/* Don't remove if some other DMAC has it too */
+		list_for_each_entry(d, &dmac_list, node)
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				del = 0;
+				break;
+			}
+
+		if (del) {
+			spin_unlock_irqrestore(&res_lock, flags);
+			s3c2410_dma_free(ch->id, ch->client);
+			spin_lock_irqsave(&res_lock, flags);
+			list_del(&ch->node);
+			kfree(ch);
+		}
+	}
+
+	/* Remove the DMAC */
+	list_del(&dmac->node);
+	kfree(dmac);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+
+static struct platform_driver pl330_driver = {
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c-pl330",
+	},
+	.probe		= pl330_probe,
+	.remove		= pl330_remove,
+};
+
+static int __init pl330_init(void)
+{
+	return platform_driver_register(&pl330_driver);
+}
+module_init(pl330_init);
+
+static void __exit pl330_exit(void)
+{
+	platform_driver_unregister(&pl330_driver);
+	return;
+}
+module_exit(pl330_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
new file mode 100644
index 0000000..2231d80
--- /dev/null
+++ b/arch/arm/plat-samsung/time.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-samsung/time.c
+ *
+ * Copyright (C) 2003-2005 Simtec Electronics
+ *	Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/system.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+#include <asm/irq.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <mach/regs-irq.h>
+#include <asm/mach/time.h>
+#include <mach/tick.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+static unsigned long timer_startval;
+static unsigned long timer_usec_ticks;
+
+#ifndef TICK_MAX
+#define TICK_MAX (0xffff)
+#endif
+
+#define TIMER_USEC_SHIFT 16
+
+/* we use the shifted arithmetic to work out the ratio of timer ticks
+ * to usecs, as often the peripheral clock is not a nice even multiple
+ * of 1MHz.
+ *
+ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
+ * for the current HZ value of 200 without producing overflows.
+ *
+ * Original patch by Dimitry Andric, updated by Ben Dooks
+*/
+
+
+/* timer_mask_usec_ticks
+ *
+ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
+ * to scale the ticks into usecs
+*/
+
+static inline unsigned long
+timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
+{
+	unsigned long den = pclk / 1000;
+
+	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
+}
+
+/* timer_ticks_to_usec
+ *
+ * convert timer ticks to usec.
+*/
+
+static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
+{
+	unsigned long res;
+
+	res = ticks * timer_usec_ticks;
+	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
+
+	return res >> TIMER_USEC_SHIFT;
+}
+
+/***
+ * Returns microsecond  since last clock interrupt.  Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ * IRQs are disabled before entering here from do_gettimeofday()
+ */
+
+static unsigned long s3c2410_gettimeoffset (void)
+{
+	unsigned long tdone;
+	unsigned long tval;
+
+	/* work out how many ticks have gone since last timer interrupt */
+
+	tval =  __raw_readl(S3C2410_TCNTO(4));
+	tdone = timer_startval - tval;
+
+	/* check to see if there is an interrupt pending */
+
+	if (s3c24xx_ostimer_pending()) {
+		/* re-read the timer, and try and fix up for the missed
+		 * interrupt. Note, the interrupt may go off before the
+		 * timer has re-loaded from wrapping.
+		 */
+
+		tval =  __raw_readl(S3C2410_TCNTO(4));
+		tdone = timer_startval - tval;
+
+		if (tval != 0)
+			tdone += timer_startval;
+	}
+
+	return timer_ticks_to_usec(tdone);
+}
+
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+s3c2410_timer_interrupt(int irq, void *dev_id)
+{
+	timer_tick();
+	return IRQ_HANDLED;
+}
+
+static struct irqaction s3c2410_timer_irq = {
+	.name		= "S3C2410 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= s3c2410_timer_interrupt,
+};
+
+#define use_tclk1_12() ( \
+	machine_is_bast()	|| \
+	machine_is_vr1000()	|| \
+	machine_is_anubis()	|| \
+	machine_is_osiris())
+
+static struct clk *tin;
+static struct clk *tdiv;
+static struct clk *timerclk;
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ *
+ * Currently we only use timer4, as it is the only timer which has no
+ * other function that can be exploited externally
+ */
+static void s3c2410_timer_setup (void)
+{
+	unsigned long tcon;
+	unsigned long tcnt;
+	unsigned long tcfg1;
+	unsigned long tcfg0;
+
+	tcnt = TICK_MAX;  /* default value for tcnt */
+
+	/* configure the system for whichever machine is in use */
+
+	if (use_tclk1_12()) {
+		/* timer is at 12MHz, scaler is 1 */
+		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
+		tcnt = 12000000 / HZ;
+
+		tcfg1 = __raw_readl(S3C2410_TCFG1);
+		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
+		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
+		__raw_writel(tcfg1, S3C2410_TCFG1);
+	} else {
+		unsigned long pclk;
+		struct clk *tscaler;
+
+		/* for the h1940 (and others), we use the pclk from the core
+		 * to generate the timer values. since values around 50 to
+		 * 70MHz are not values we can directly generate the timer
+		 * value from, we need to pre-scale and divide before using it.
+		 *
+		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
+		 * (8.45 ticks per usec)
+		 */
+
+		pclk = clk_get_rate(timerclk);
+
+		/* configure clock tick */
+
+		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
+
+		tscaler = clk_get_parent(tdiv);
+
+		clk_set_rate(tscaler, pclk / 3);
+		clk_set_rate(tdiv, pclk / 6);
+		clk_set_parent(tin, tdiv);
+
+		tcnt = clk_get_rate(tin) / HZ;
+	}
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcfg0 = __raw_readl(S3C2410_TCFG0);
+	tcfg1 = __raw_readl(S3C2410_TCFG1);
+
+	/* timers reload after counting zero, so reduce the count by 1 */
+
+	tcnt--;
+
+	printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
+	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
+
+	/* check to see if timer is within 16bit range... */
+	if (tcnt > TICK_MAX) {
+		panic("setup_timer: HZ is too small, cannot configure timer!");
+		return;
+	}
+
+	__raw_writel(tcfg1, S3C2410_TCFG1);
+	__raw_writel(tcfg0, S3C2410_TCFG0);
+
+	timer_startval = tcnt;
+	__raw_writel(tcnt, S3C2410_TCNTB(4));
+
+	/* ensure timer is stopped... */
+
+	tcon &= ~(7<<20);
+	tcon |= S3C2410_TCON_T4RELOAD;
+	tcon |= S3C2410_TCON_T4MANUALUPD;
+
+	__raw_writel(tcon, S3C2410_TCON);
+	__raw_writel(tcnt, S3C2410_TCNTB(4));
+	__raw_writel(tcnt, S3C2410_TCMPB(4));
+
+	/* start the timer running */
+	tcon |= S3C2410_TCON_T4START;
+	tcon &= ~S3C2410_TCON_T4MANUALUPD;
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void __init s3c2410_timer_resources(void)
+{
+	struct platform_device tmpdev;
+
+	tmpdev.dev.bus = &platform_bus_type;
+	tmpdev.id = 4;
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get clock for system timer");
+
+	clk_enable(timerclk);
+
+	if (!use_tclk1_12()) {
+		tin = clk_get(&tmpdev.dev, "pwm-tin");
+		if (IS_ERR(tin))
+			panic("failed to get pwm-tin clock for system timer");
+
+		tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
+		if (IS_ERR(tdiv))
+			panic("failed to get pwm-tdiv clock for system timer");
+	}
+
+	clk_enable(tin);
+}
+
+static void __init s3c2410_timer_init(void)
+{
+	s3c2410_timer_resources();
+	s3c2410_timer_setup();
+	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+}
+
+struct sys_timer s3c24xx_timer = {
+	.init		= s3c2410_timer_init,
+	.offset		= s3c2410_gettimeoffset,
+	.resume		= s3c2410_timer_setup
+};
diff --git a/arch/arm/plat-samsung/wakeup-mask.c b/arch/arm/plat-samsung/wakeup-mask.c
new file mode 100644
index 0000000..2e09b6a
--- /dev/null
+++ b/arch/arm/plat-samsung/wakeup-mask.c
@@ -0,0 +1,47 @@
+/* arch/arm/plat-samsung/wakeup-mask.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/wakeup-mask.h>
+#include <plat/pm.h>
+
+void samsung_sync_wakemask(void __iomem *reg,
+			   struct samsung_wakeup_mask *mask, int nr_mask)
+{
+	struct irq_desc *desc;
+	u32 val;
+
+	val = __raw_readl(reg);
+
+	for (; nr_mask > 0; nr_mask--, mask++) {
+		if (mask->irq == NO_WAKEUP_IRQ) {
+			val |= mask->bit;
+			continue;
+		}
+
+		desc = irq_to_desc(mask->irq);
+
+		/* bit of a liberty to read this directly from irq_desc. */
+		if (desc->wake_depth > 0)
+			val &= ~mask->bit;
+		else
+			val |= mask->bit;
+	}
+
+	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
+	__raw_writel(val, reg);
+}
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
new file mode 100644
index 0000000..1bb3dbc
--- /dev/null
+++ b/arch/arm/plat-spear/Kconfig
@@ -0,0 +1,31 @@
+#
+# SPEAr Platform configuration file
+#
+
+if PLAT_SPEAR
+
+choice
+	prompt "ST SPEAr Family"
+	default ARCH_SPEAR3XX
+
+config ARCH_SPEAR3XX
+	bool "SPEAr3XX"
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR3XX family
+
+config ARCH_SPEAR6XX
+	bool "SPEAr6XX"
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR6XX family
+
+endchoice
+
+# Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig"
+source "arch/arm/mach-spear6xx/Kconfig"
+
+endif
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
new file mode 100644
index 0000000..eb89540
--- /dev/null
+++ b/arch/arm/plat-spear/Makefile
@@ -0,0 +1,8 @@
+#
+# SPEAr Platform specific Makefile
+#
+
+# Common support
+obj-y	:= clock.o padmux.o time.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c
new file mode 100644
index 0000000..ee4f90e
--- /dev/null
+++ b/arch/arm/plat-spear/clock.c
@@ -0,0 +1,435 @@
+/*
+ * arch/arm/plat-spear/clock.c
+ *
+ * Clock framework for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(root_clks);
+
+static void propagate_rate(struct list_head *);
+
+static int generic_clk_enable(struct clk *clk)
+{
+	unsigned int val;
+
+	if (!clk->en_reg)
+		return -EFAULT;
+
+	val = readl(clk->en_reg);
+	if (unlikely(clk->flags & RESET_TO_ENABLE))
+		val &= ~(1 << clk->en_reg_bit);
+	else
+		val |= 1 << clk->en_reg_bit;
+
+	writel(val, clk->en_reg);
+
+	return 0;
+}
+
+static void generic_clk_disable(struct clk *clk)
+{
+	unsigned int val;
+
+	if (!clk->en_reg)
+		return;
+
+	val = readl(clk->en_reg);
+	if (unlikely(clk->flags & RESET_TO_ENABLE))
+		val |= 1 << clk->en_reg_bit;
+	else
+		val &= ~(1 << clk->en_reg_bit);
+
+	writel(val, clk->en_reg);
+}
+
+/* generic clk ops */
+static struct clkops generic_clkops = {
+	.enable = generic_clk_enable,
+	.disable = generic_clk_disable,
+};
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (!clk || IS_ERR(clk))
+		return -EFAULT;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->usage_count == 0) {
+		if (clk->ops && clk->ops->enable)
+			ret = clk->ops->enable(clk);
+	}
+	clk->usage_count++;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk))
+		return;
+
+	WARN_ON(clk->usage_count == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->usage_count--;
+	if (clk->usage_count == 0) {
+		if (clk->ops && clk->ops->disable)
+			clk->ops->disable(clk);
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *		 This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long flags, rate;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	rate = clk->rate;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i, found = 0, val = 0;
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+		return -EFAULT;
+	if (clk->usage_count)
+		return -EBUSY;
+	if (!clk->pclk_sel)
+		return -EPERM;
+	if (clk->pclk == parent)
+		return 0;
+
+	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	/* reflect parent change in hardware */
+	val = readl(clk->pclk_sel->pclk_sel_reg);
+	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
+	val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+	writel(val, clk->pclk_sel->pclk_sel_reg);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	/* reflect parent change in software */
+	clk->recalc(clk);
+	propagate_rate(&clk->children);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* registers clock in platform clock framework */
+void clk_register(struct clk_lookup *cl)
+{
+	struct clk *clk = cl->clk;
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	INIT_LIST_HEAD(&clk->children);
+	if (clk->flags & ALWAYS_ENABLED)
+		clk->ops = NULL;
+	else if (!clk->ops)
+		clk->ops = &generic_clkops;
+
+	/* root clock don't have any parents */
+	if (!clk->pclk && !clk->pclk_sel) {
+		list_add(&clk->sibling, &root_clks);
+		/* add clocks with only one parent to parent's children list */
+	} else if (clk->pclk && !clk->pclk_sel) {
+		list_add(&clk->sibling, &clk->pclk->children);
+	} else {
+		/* add clocks with > 1 parent to 1st parent's children list */
+		list_add(&clk->sibling,
+			 &clk->pclk_sel->pclk_info[0].pclk->children);
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	/* add clock to arm clockdev framework */
+	clkdev_add(cl);
+}
+
+/**
+ * propagate_rate - recalculate and propagate all clocks in list head
+ *
+ * Recalculates all root clocks in list head, which if the clock's .recalc is
+ * set correctly, should also propagate their rates.
+ */
+static void propagate_rate(struct list_head *lhead)
+{
+	struct clk *clkp, *_temp;
+
+	list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
+		if (clkp->recalc)
+			clkp->recalc(clkp);
+		propagate_rate(&clkp->children);
+	}
+}
+
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+	unsigned int mask, i;
+	unsigned long flags;
+	struct pclk_info *info = NULL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+			& clk->pclk_sel->pclk_sel_mask;
+
+	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+		if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
+			info = &clk->pclk_sel->pclk_info[i];
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return info;
+}
+
+/*
+ * Set pclk as cclk's parent and add clock sibling node to current parents
+ * children list
+ */
+static void change_parent(struct clk *cclk, struct clk *pclk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	list_del(&cclk->sibling);
+	list_add(&cclk->sibling, &pclk->children);
+
+	cclk->pclk = pclk;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of pll1
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+void pll1_clk_recalc(struct clk *clk)
+{
+	struct pll_clk_config *config = clk->private_data;
+	unsigned int num = 2, den = 0, val, mode = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
+		PLL_MODE_MASK;
+
+	val = readl(config->cfg_reg);
+	/* calculate denominator */
+	den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+	den = 1 << den;
+	den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+	/* calculate numerator & denominator */
+	if (!mode) {
+		/* Normal mode */
+		num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+	} else {
+		/* Dithered mode */
+		num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+		den *= 256;
+	}
+
+	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/* calculates current programmed rate of ahb or apb bus */
+void bus_clk_recalc(struct clk *clk)
+{
+	struct bus_clk_config *config = clk->private_data;
+	unsigned int div;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+	clk->rate = (unsigned long)clk->pclk->rate / div;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of auxiliary synthesizers
+ * used by: UART, FIRDA
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2
+ * Fout2 = Fin * X/Y
+ *
+ * Selection of eqn 1 or 2 is programmed in register
+ */
+void aux_clk_recalc(struct clk *clk)
+{
+	struct aux_clk_config *config = clk->private_data;
+	struct pclk_info *pclk_info = NULL;
+	unsigned int num = 1, den = 1, val, eqn;
+	unsigned long flags;
+
+	/* get current programmed parent */
+	pclk_info = pclk_info_get(clk);
+	if (!pclk_info) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		clk->pclk = NULL;
+		clk->rate = 0;
+		spin_unlock_irqrestore(&clocks_lock, flags);
+		return;
+	}
+
+	change_parent(clk, pclk_info->pclk);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (pclk_info->scalable) {
+		val = readl(config->synth_reg);
+
+		eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
+		if (eqn == AUX_EQ1_SEL)
+			den *= 2;
+
+		/* calculate numerator */
+		num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+
+		/* calculate denominator */
+		den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
+		val = (((clk->pclk->rate/10000) * num) / den) * 10000;
+	} else
+		val = clk->pclk->rate;
+
+	clk->rate = val;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of gpt synthesizers
+ * Fout from synthesizer can be given from below equations:
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+void gpt_clk_recalc(struct clk *clk)
+{
+	struct aux_clk_config *config = clk->private_data;
+	struct pclk_info *pclk_info = NULL;
+	unsigned int div = 1, val;
+	unsigned long flags;
+
+	pclk_info = pclk_info_get(clk);
+	if (!pclk_info) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		clk->pclk = NULL;
+		clk->rate = 0;
+		spin_unlock_irqrestore(&clocks_lock, flags);
+		return;
+	}
+
+	change_parent(clk, pclk_info->pclk);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (pclk_info->scalable) {
+		val = readl(config->synth_reg);
+		div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
+		div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+	}
+
+	clk->rate = (unsigned long)clk->pclk->rate / div;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * Used for clocks that always have same value as the parent clock divided by a
+ * fixed divisor
+ */
+void follow_parent(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->rate = clk->pclk->rate;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/**
+ * recalc_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ */
+void recalc_root_clocks(void)
+{
+	propagate_rate(&root_clks);
+}
diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h
new file mode 100644
index 0000000..a2d0112
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clkdev.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_CLKDEV_H
+#define __PLAT_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __PLAT_CLKDEV_H */
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
new file mode 100644
index 0000000..298bafc
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/plat-spear/include/plat/clock.h
+ *
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_CLOCK_H
+#define __PLAT_CLOCK_H
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+#include <linux/types.h>
+
+/* clk structure flags */
+#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
+#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
+
+/**
+ * struct clkops - clock operations
+ * @enable: pointer to clock enable function
+ * @disable: pointer to clock disable function
+ */
+struct clkops {
+	int (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+/**
+ * struct pclk_info - parents info
+ * @pclk: pointer to parent clk
+ * @pclk_mask: value to be written for selecting this parent
+ * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ */
+struct pclk_info {
+	struct clk *pclk;
+	u8 pclk_mask;
+	u8 scalable;
+};
+
+/**
+ * struct pclk_sel - parents selection configuration
+ * @pclk_info: pointer to array of parent clock info
+ * @pclk_count: number of parents
+ * @pclk_sel_reg: register for selecting a parent
+ * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
+ */
+struct pclk_sel {
+	struct pclk_info *pclk_info;
+	u8 pclk_count;
+	unsigned int *pclk_sel_reg;
+	unsigned int pclk_sel_mask;
+};
+
+/**
+ * struct clk - clock structure
+ * @usage_count: num of users who enabled this clock
+ * @flags: flags for clock properties
+ * @rate: programmed clock rate in Hz
+ * @en_reg: clk enable/disable reg
+ * @en_reg_bit: clk enable/disable bit
+ * @ops: clk enable/disable ops - generic_clkops selected if NULL
+ * @recalc: pointer to clock rate recalculate function
+ * @pclk: current parent clk
+ * @pclk_sel: pointer to parent selection structure
+ * @pclk_sel_shift: register shift for selecting parent of this clock
+ * @children: list for childrens or this clock
+ * @sibling: node for list of clocks having same parents
+ * @private_data: clock specific private data
+ */
+struct clk {
+	unsigned int usage_count;
+	unsigned int flags;
+	unsigned long rate;
+	unsigned int *en_reg;
+	u8 en_reg_bit;
+	const struct clkops *ops;
+	void (*recalc) (struct clk *);
+
+	struct clk *pclk;
+	struct pclk_sel *pclk_sel;
+	unsigned int pclk_sel_shift;
+
+	struct list_head children;
+	struct list_head sibling;
+	void *private_data;
+};
+
+/* pll configuration structure */
+struct pll_clk_config {
+	unsigned int *mode_reg;
+	unsigned int *cfg_reg;
+};
+
+/* ahb and apb bus configuration structure */
+struct bus_clk_config {
+	unsigned int *reg;
+	unsigned int mask;
+	unsigned int shift;
+};
+
+/*
+ * Aux clk configuration structure: applicable to GPT, UART and FIRDA
+ */
+struct aux_clk_config {
+	unsigned int *synth_reg;
+};
+
+/* platform specific clock functions */
+void clk_register(struct clk_lookup *cl);
+void recalc_root_clocks(void);
+
+/* clock recalc functions */
+void follow_parent(struct clk *clk);
+void pll1_clk_recalc(struct clk *clk);
+void bus_clk_recalc(struct clk *clk);
+void gpt_clk_recalc(struct clk *clk);
+void aux_clk_recalc(struct clk *clk);
+
+#endif /* __PLAT_CLOCK_H */
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
new file mode 100644
index 0000000..37fa593
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-spear/include/plat/debug-macro.S
+ *
+ * Debugging macro include header for spear platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1					@ MMU enabled?
+		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.endm
+
+		.macro	senduart, rd, rx
+		strb	\rd, [\rx, #UART01x_DR]			@ ASC_TX_BUFFER
+		.endm
+
+		.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART01x_FR_TXFF			@ TX_FULL
+		bne	1001b
+		.endm
+
+		.macro	busyuart, rd, rx
+1002:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART011_FR_TXFE			@ TX_EMPTY
+		beq	1002b
+		.endm
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
new file mode 100644
index 0000000..b857c91
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-spear/include/plat/gpio.h
+ *
+ * GPIO macros for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-spear/include/plat/io.h b/arch/arm/plat-spear/include/plat/io.h
new file mode 100644
index 0000000..4d4ba82
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/plat-spear/include/plat/io.h
+ *
+ * IO definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IO_H
+#define __PLAT_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif /* __PLAT_IO_H */
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
new file mode 100644
index 0000000..27a4aba
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/memory.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/memory.h
+ *
+ * Memory map for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MEMORY_H
+#define __PLAT_MEMORY_H
+
+/* Physical DRAM offset */
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
new file mode 100644
index 0000000..877f3ad
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/padmux.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.h
+ *
+ * SPEAr platform specific gpio pads muxing file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PADMUX_H
+#define __PLAT_PADMUX_H
+
+#include <linux/types.h>
+
+/*
+ * struct pmx_reg: configuration structure for mode reg and mux reg
+ *
+ * offset: offset of mode reg
+ * mask: mask of mode reg
+ */
+struct pmx_reg {
+	u32 offset;
+	u32 mask;
+};
+
+/*
+ * struct pmx_dev_mode: configuration structure every group of modes of a device
+ *
+ * ids: all modes for this configuration
+ * mask: mask for supported mode
+ */
+struct pmx_dev_mode {
+	u32 ids;
+	u32 mask;
+};
+
+/*
+ * struct pmx_mode: mode definition structure
+ *
+ * name: mode name
+ * mask: mode mask
+ */
+struct pmx_mode {
+	char *name;
+	u32 id;
+	u32 mask;
+};
+
+/*
+ * struct pmx_dev: device definition structure
+ *
+ * name: device name
+ * modes: device configuration array for different modes supported
+ * mode_count: size of modes array
+ * is_active: is peripheral active/enabled
+ * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
+ */
+struct pmx_dev {
+	char *name;
+	struct pmx_dev_mode *modes;
+	u8 mode_count;
+	bool is_active;
+	bool enb_on_reset;
+};
+
+/*
+ * struct pmx_driver: driver definition structure
+ *
+ * mode: mode to be set
+ * devs: array of pointer to pmx devices
+ * devs_count: ARRAY_SIZE of devs
+ * base: base address of soc config registers
+ * mode_reg: structure of mode config register
+ * mux_reg: structure of device mux config register
+ */
+struct pmx_driver {
+	struct pmx_mode *mode;
+	struct pmx_dev **devs;
+	u8 devs_count;
+	u32 *base;
+	struct pmx_reg mode_reg;
+	struct pmx_reg mux_reg;
+};
+
+/* pmx functions */
+int pmx_register(struct pmx_driver *driver);
+
+#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h
new file mode 100644
index 0000000..03ed8b5
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/shirq.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/plat-spear/include/plat/shirq.h
+ *
+ * SPEAr platform shared irq layer header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SHIRQ_H
+#define __PLAT_SHIRQ_H
+
+#include <linux/irq.h>
+#include <linux/types.h>
+
+/*
+ * struct shirq_dev_config: shared irq device configuration
+ *
+ * virq: virtual irq number of device
+ * enb_mask: enable mask of device
+ * status_mask: status mask of device
+ * clear_mask: clear mask of device
+ */
+struct shirq_dev_config {
+	u32 virq;
+	u32 enb_mask;
+	u32 status_mask;
+	u32 clear_mask;
+};
+
+/*
+ * struct shirq_regs: shared irq register configuration
+ *
+ * base: base address of shared irq register
+ * enb_reg: enable register offset
+ * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
+ * status_reg: status register offset
+ * status_reg_mask: status register valid mask
+ * clear_reg: clear register offset
+ * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
+ */
+struct shirq_regs {
+	void __iomem *base;
+	u32 enb_reg;
+	u32 reset_to_enb;
+	u32 status_reg;
+	u32 status_reg_mask;
+	u32 clear_reg;
+	u32 reset_to_clear;
+};
+
+/*
+ * struct spear_shirq: shared irq structure
+ *
+ * irq: hardware irq number
+ * dev_config: array of device config structures which are using "irq" line
+ * dev_count: size of dev_config array
+ * regs: register configuration for shared irq block
+ */
+struct spear_shirq {
+	u32 irq;
+	struct shirq_dev_config *dev_config;
+	u32 dev_count;
+	struct shirq_regs regs;
+};
+
+int spear_shirq_register(struct spear_shirq *shirq);
+
+#endif /* __PLAT_SHIRQ_H */
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
new file mode 100644
index 0000000..55a4e40
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-spear/include/plat/system.h
+ *
+ * SPEAr platform specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SYSTEM_H
+#define __PLAT_SYSTEM_H
+
+#include <asm/hardware/sp810.h>
+#include <linux/io.h>
+#include <mach/spear.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* software reset, Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* hardware reset, Use on-chip reset capability */
+		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+	}
+}
+
+#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h
new file mode 100644
index 0000000..914d09d
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/timex.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+
+#define CLOCK_TICK_RATE			48000000
+
+#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
new file mode 100644
index 0000000..99ba678
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-spear/include/plat/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+#ifndef __PLAT_UNCOMPRESS_H
+#define __PLAT_UNCOMPRESS_H
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
+
+	while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	writel(c, base + UART01x_DR);
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h
new file mode 100644
index 0000000..09e9372
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_VMALLOC_H
+#define __PLAT_VMALLOC_H
+
+#define VMALLOC_END		0xF0000000
+
+#endif /* __PLAT_VMALLOC_H */
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
new file mode 100644
index 0000000..d2aab3a
--- /dev/null
+++ b/arch/arm/plat-spear/padmux.c
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.c
+ *
+ * SPEAr platform specific gpio pads muxing source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <plat/padmux.h>
+
+/*
+ * struct pmx: pmx definition structure
+ *
+ * base: base address of configuration registers
+ * mode_reg: mode configurations
+ * mux_reg: muxing configurations
+ * active_mode: pointer to current active mode
+ */
+struct pmx {
+	u32 base;
+	struct pmx_reg mode_reg;
+	struct pmx_reg mux_reg;
+	struct pmx_mode *active_mode;
+};
+
+static struct pmx *pmx;
+
+/**
+ * pmx_mode_set - Enables an multiplexing mode
+ * @mode - pointer to pmx mode
+ *
+ * It will set mode of operation in hardware.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_mode_set(struct pmx_mode *mode)
+{
+	u32 val;
+
+	if (!mode->name)
+		return -EFAULT;
+
+	pmx->active_mode = mode;
+
+	val = readl(pmx->base + pmx->mode_reg.offset);
+	val &= ~pmx->mode_reg.mask;
+	val |= mode->mask & pmx->mode_reg.mask;
+	writel(val, pmx->base + pmx->mode_reg.offset);
+
+	return 0;
+}
+
+/**
+ * pmx_devs_enable - Enables list of devices
+ * @devs - pointer to pmx device array
+ * @count - number of devices to enable
+ *
+ * It will enable pads for all required peripherals once and only once.
+ * If peripheral is not supported by current mode then request is rejected.
+ * Conflicts between peripherals are not handled and peripherals will be
+ * enabled in the order they are present in pmx_dev array.
+ * In case of conflicts last peripheral enalbed will be present.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
+{
+	u32 val, i, mask;
+
+	if (!count)
+		return -EINVAL;
+
+	val = readl(pmx->base + pmx->mux_reg.offset);
+	for (i = 0; i < count; i++) {
+		u8 j = 0;
+
+		if (!devs[i]->name || !devs[i]->modes) {
+			printk(KERN_ERR "padmux: dev name or modes is null\n");
+			continue;
+		}
+		/* check if peripheral exists in active mode */
+		if (pmx->active_mode) {
+			bool found = false;
+			for (j = 0; j < devs[i]->mode_count; j++) {
+				if (devs[i]->modes[j].ids &
+						pmx->active_mode->id) {
+					found = true;
+					break;
+				}
+			}
+			if (found == false) {
+				printk(KERN_ERR "%s device not available in %s"\
+						"mode\n", devs[i]->name,
+						pmx->active_mode->name);
+				continue;
+			}
+		}
+
+		/* enable peripheral */
+		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
+		if (devs[i]->enb_on_reset)
+			val &= ~mask;
+		else
+			val |= mask;
+
+		devs[i]->is_active = true;
+	}
+	writel(val, pmx->base + pmx->mux_reg.offset);
+	kfree(pmx);
+
+	/* this will ensure that multiplexing can't be changed now */
+	pmx = (struct pmx *)-1;
+
+	return 0;
+}
+
+/**
+ * pmx_register - registers a platform requesting pad mux feature
+ * @driver - pointer to driver structure containing driver specific parameters
+ *
+ * Also this must be called only once. This will allocate memory for pmx
+ * structure, will call pmx_mode_set, will call pmx_devs_enable.
+ * Returns -ve on Err otherwise 0
+ */
+int pmx_register(struct pmx_driver *driver)
+{
+	int ret = 0;
+
+	if (pmx)
+		return -EPERM;
+	if (!driver->base || !driver->devs)
+		return -EFAULT;
+
+	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
+	if (!pmx)
+		return -ENOMEM;
+
+	pmx->base = (u32)driver->base;
+	pmx->mode_reg.offset = driver->mode_reg.offset;
+	pmx->mode_reg.mask = driver->mode_reg.mask;
+	pmx->mux_reg.offset = driver->mux_reg.offset;
+	pmx->mux_reg.mask = driver->mux_reg.mask;
+
+	/* choose mode to enable */
+	if (driver->mode) {
+		ret = pmx_mode_set(driver->mode);
+		if (ret)
+			goto pmx_fail;
+	}
+	ret = pmx_devs_enable(driver->devs, driver->devs_count);
+	if (ret)
+		goto pmx_fail;
+
+	return 0;
+
+pmx_fail:
+	return ret;
+}
diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c
new file mode 100644
index 0000000..2172d69
--- /dev/null
+++ b/arch/arm/plat-spear/shirq.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/plat-spear/shirq.c
+ *
+ * SPEAr platform shared irq layer source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <plat/shirq.h>
+
+struct spear_shirq *shirq;
+static DEFINE_SPINLOCK(lock);
+
+static void shirq_irq_mask(unsigned irq)
+{
+	struct spear_shirq *shirq = get_irq_chip_data(irq);
+	u32 val, id = irq - shirq->dev_config[0].virq;
+	unsigned long flags;
+
+	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+		return;
+
+	spin_lock_irqsave(&lock, flags);
+	val = readl(shirq->regs.base + shirq->regs.enb_reg);
+	if (shirq->regs.reset_to_enb)
+		val |= shirq->dev_config[id].enb_mask;
+	else
+		val &= ~(shirq->dev_config[id].enb_mask);
+	writel(val, shirq->regs.base + shirq->regs.enb_reg);
+	spin_unlock_irqrestore(&lock, flags);
+}
+
+static void shirq_irq_unmask(unsigned irq)
+{
+	struct spear_shirq *shirq = get_irq_chip_data(irq);
+	u32 val, id = irq - shirq->dev_config[0].virq;
+	unsigned long flags;
+
+	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+		return;
+
+	spin_lock_irqsave(&lock, flags);
+	val = readl(shirq->regs.base + shirq->regs.enb_reg);
+	if (shirq->regs.reset_to_enb)
+		val &= ~(shirq->dev_config[id].enb_mask);
+	else
+		val |= shirq->dev_config[id].enb_mask;
+	writel(val, shirq->regs.base + shirq->regs.enb_reg);
+	spin_unlock_irqrestore(&lock, flags);
+}
+
+static struct irq_chip shirq_chip = {
+	.name		= "spear_shirq",
+	.ack		= shirq_irq_mask,
+	.mask		= shirq_irq_mask,
+	.unmask		= shirq_irq_unmask,
+};
+
+static void shirq_handler(unsigned irq, struct irq_desc *desc)
+{
+	u32 i, val, mask;
+	struct spear_shirq *shirq = get_irq_data(irq);
+
+	desc->chip->ack(irq);
+	while ((val = readl(shirq->regs.base + shirq->regs.status_reg) &
+				shirq->regs.status_reg_mask)) {
+		for (i = 0; (i < shirq->dev_count) && val; i++) {
+			if (!(shirq->dev_config[i].status_mask & val))
+				continue;
+
+			generic_handle_irq(shirq->dev_config[i].virq);
+
+			/* clear interrupt */
+			val &= ~shirq->dev_config[i].status_mask;
+			if ((shirq->regs.clear_reg == -1) ||
+					shirq->dev_config[i].clear_mask == -1)
+				continue;
+			mask = readl(shirq->regs.base + shirq->regs.clear_reg);
+			if (shirq->regs.reset_to_clear)
+				mask &= ~shirq->dev_config[i].clear_mask;
+			else
+				mask |= shirq->dev_config[i].clear_mask;
+			writel(mask, shirq->regs.base + shirq->regs.clear_reg);
+		}
+	}
+	desc->chip->unmask(irq);
+}
+
+int spear_shirq_register(struct spear_shirq *shirq)
+{
+	int i;
+
+	if (!shirq || !shirq->dev_config || !shirq->regs.base)
+		return -EFAULT;
+
+	if (!shirq->dev_count)
+		return -EINVAL;
+
+	set_irq_chained_handler(shirq->irq, shirq_handler);
+	for (i = 0; i < shirq->dev_count; i++) {
+		set_irq_chip(shirq->dev_config[i].virq, &shirq_chip);
+		set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq);
+		set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID);
+		set_irq_chip_data(shirq->dev_config[i].virq, shirq);
+	}
+
+	set_irq_data(shirq->irq, shirq);
+	return 0;
+}
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
new file mode 100644
index 0000000..a1025d3
--- /dev/null
+++ b/arch/arm/plat-spear/time.c
@@ -0,0 +1,292 @@
+/*
+ * arch/arm/plat-spear/time.c
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Shiraz Hashim<shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <mach/generic.h>
+
+/*
+ * We would use TIMER0 and TIMER1 as clockevent and clocksource.
+ * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
+ * they share same functional clock. Any change in one's functional clock will
+ * also affect other timer.
+ */
+
+#define CLKEVT	0	/* gpt0, channel0 as clockevent */
+#define CLKSRC	1	/* gpt0, channel1 as clocksource */
+
+/* Register offsets, x is channel number */
+#define CR(x)		((x) * 0x80 + 0x80)
+#define IR(x)		((x) * 0x80 + 0x84)
+#define LOAD(x)		((x) * 0x80 + 0x88)
+#define COUNT(x)	((x) * 0x80 + 0x8C)
+
+/* Reg bit definitions */
+#define CTRL_INT_ENABLE		0x0100
+#define CTRL_ENABLE		0x0020
+#define CTRL_ONE_SHOT		0x0010
+
+#define CTRL_PRESCALER1		0x0
+#define CTRL_PRESCALER2		0x1
+#define CTRL_PRESCALER4		0x2
+#define CTRL_PRESCALER8		0x3
+#define CTRL_PRESCALER16	0x4
+#define CTRL_PRESCALER32	0x5
+#define CTRL_PRESCALER64	0x6
+#define CTRL_PRESCALER128	0x7
+#define CTRL_PRESCALER256	0x8
+
+#define INT_STATUS		0x1
+
+static __iomem void *gpt_base;
+static struct clk *gpt_clk;
+
+static void clockevent_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk_event_dev);
+static int clockevent_next_event(unsigned long evt,
+				 struct clock_event_device *clk_event_dev);
+
+/*
+ * Following clocksource_set_clock and clockevent_set_clock picked
+ * from arch/mips/kernel/time.c
+ */
+
+void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find a shift value */
+	for (shift = 32; shift > 0; shift--) {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, clock);
+		if ((temp >> 32) == 0)
+			break;
+	}
+	cs->shift = shift;
+	cs->mult = (u32) temp;
+}
+
+void __init clockevent_set_clock(struct clock_event_device *cd,
+	unsigned int clock)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find a shift value */
+	for (shift = 32; shift > 0; shift--) {
+		temp = (u64) clock << shift;
+		do_div(temp, NSEC_PER_SEC);
+		if ((temp >> 32) == 0)
+			break;
+	}
+	cd->shift = shift;
+	cd->mult = (u32) temp;
+}
+
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
+{
+	return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
+}
+
+static struct clocksource clksrc = {
+	.name = "tmr1",
+	.rating = 200,		/* its a pretty decent clock */
+	.read = clocksource_read_cycles,
+	.mask = 0xFFFF,		/* 16 bits */
+	.mult = 0,		/* to be computed */
+	.shift = 0,		/* to be computed */
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void spear_clocksource_init(void)
+{
+	u32 tick_rate;
+	u16 val;
+
+	/* program the prescaler (/256)*/
+	writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
+
+	/* find out actual clock driving Timer */
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER256;
+
+	writew(0xFFFF, gpt_base + LOAD(CLKSRC));
+
+	val = readw(gpt_base + CR(CLKSRC));
+	val &= ~CTRL_ONE_SHOT;	/* autoreload mode */
+	val |= CTRL_ENABLE ;
+	writew(val, gpt_base + CR(CLKSRC));
+
+	clocksource_set_clock(&clksrc, tick_rate);
+
+	/* register the clocksource */
+	clocksource_register(&clksrc);
+}
+
+static struct clock_event_device clkevt = {
+	.name = "tmr0",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = clockevent_set_mode,
+	.set_next_event = clockevent_next_event,
+	.shift = 0,	/* to be computed */
+};
+
+static void clockevent_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk_event_dev)
+{
+	u32 period;
+	u16 val;
+
+	/* stop the timer */
+	val = readw(gpt_base + CR(CLKEVT));
+	val &= ~CTRL_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(gpt_clk) / HZ;
+		period >>= CTRL_PRESCALER16;
+		writew(period, gpt_base + LOAD(CLKEVT));
+
+		val = readw(gpt_base + CR(CLKEVT));
+		val &= ~CTRL_ONE_SHOT;
+		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+		writew(val, gpt_base + CR(CLKEVT));
+
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		val = readw(gpt_base + CR(CLKEVT));
+		val |= CTRL_ONE_SHOT;
+		writew(val, gpt_base + CR(CLKEVT));
+
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+
+		break;
+	default:
+		pr_err("Invalid mode requested\n");
+		break;
+	}
+}
+
+static int clockevent_next_event(unsigned long cycles,
+				 struct clock_event_device *clk_event_dev)
+{
+	u16 val;
+
+	writew(cycles, gpt_base + LOAD(CLKEVT));
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clkevt;
+
+	writew(INT_STATUS, gpt_base + IR(CLKEVT));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction spear_timer_irq = {
+	.name = "timer",
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.handler = spear_timer_interrupt
+};
+
+static void __init spear_clockevent_init(void)
+{
+	u32 tick_rate;
+
+	/* program the prescaler */
+	writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
+
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER16;
+
+	clockevent_set_clock(&clkevt, tick_rate);
+
+	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
+			&clkevt);
+	clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
+
+	clkevt.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clkevt);
+
+	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+}
+
+void __init spear_setup_timer(void)
+{
+	struct clk *pll3_clk;
+
+	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+		pr_err("%s:cannot get IO addr\n", __func__);
+		return;
+	}
+
+	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	if (!gpt_base) {
+		pr_err("%s:ioremap failed for gpt\n", __func__);
+		goto err_mem;
+	}
+
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (!gpt_clk) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		goto err_iomap;
+	}
+
+	pll3_clk = clk_get(NULL, "pll3_48m_clk");
+	if (!pll3_clk) {
+		pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
+		goto err_iomap;
+	}
+
+	clk_set_parent(gpt_clk, pll3_clk);
+
+	spear_clockevent_init();
+	spear_clocksource_init();
+
+	return;
+
+err_iomap:
+	iounmap(gpt_base);
+
+err_mem:
+	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+}
+
+struct sys_timer spear_sys_timer = {
+	.init = spear_setup_timer,
+};
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
index 5d2f19a..e593a2a 100644
--- a/arch/arm/plat-stmp3xxx/clock.c
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -1126,9 +1126,8 @@ static int __init clk_init(void)
 			if (ops && ops->set_parent)
 				ops->set_parent(cl->clk, cl->clk->parent);
 		}
-
-		clkdev_add(cl);
 	}
+	clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
 	return 0;
 }
 
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index ef88f25..b4dcf8c 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -15,6 +15,7 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
+#include <linux/gfp.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index fb3b969..1b9348b 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address
diff --git a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
index 541b880..943c1a2 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
+++ b/arch/arm/plat-stmp3xxx/include/mach/vmalloc.h
@@ -9,4 +9,4 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#define VMALLOC_END       (0xF0000000)
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
new file mode 100644
index 0000000..9b1a668
--- /dev/null
+++ b/arch/arm/plat-versatile/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= clock.o
+obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
+obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
+obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c
new file mode 100644
index 0000000..5c8b656
--- /dev/null
+++ b/arch/arm/plat-versatile/clock.c
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/plat-versatile/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/hardware/icst.h>
+
+#include <mach/clkdev.h>
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	long ret = -EIO;
+	if (clk->ops && clk->ops->round)
+		ret = clk->ops->round(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+	if (clk->ops && clk->ops->set)
+		ret = clk->ops->set(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+long icst_clk_round(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+	vco = icst_hz_to_vco(clk->params, rate);
+	return icst_hz(clk->params, vco);
+}
+EXPORT_SYMBOL(icst_clk_round);
+
+int icst_clk_set(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(clk->params, rate);
+	clk->rate = icst_hz(clk->params, vco);
+	clk->ops->setvco(clk, vco);
+
+	return 0;
+}
+EXPORT_SYMBOL(icst_clk_set);
diff --git a/arch/arm/plat-versatile/include/plat/clock.h b/arch/arm/plat-versatile/include/plat/clock.h
new file mode 100644
index 0000000..3cfb024
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/clock.h
@@ -0,0 +1,15 @@
+#ifndef PLAT_CLOCK_H
+#define PLAT_CLOCK_H
+
+#include <asm/hardware/icst.h>
+
+struct clk_ops {
+	long	(*round)(struct clk *, unsigned long);
+	int	(*set)(struct clk *, unsigned long);
+	void	(*setvco)(struct clk *, struct icst_vco);
+};
+
+int icst_clk_set(struct clk *, unsigned long);
+long icst_clk_round(struct clk *, unsigned long);
+
+#endif
diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/plat-versatile/include/plat/timer-sp.h
new file mode 100644
index 0000000..21e75e3
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/timer-sp.h
@@ -0,0 +1,2 @@
+void sp804_clocksource_init(void __iomem *);
+void sp804_clockevents_init(void __iomem *, unsigned int);
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
new file mode 100644
index 0000000..9768cf7
--- /dev/null
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -0,0 +1,53 @@
+/*
+ *  linux/arch/arm/plat-versatile/sched-clock.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/cnt32_to_63.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+#endif
+
+/*
+ * This is the Realview and Versatile sched_clock implementation.  This
+ * has a resolution of 41.7ns, and a maximum value of about 35583 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 89 seconds between successive
+ * calls to this function.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(readl(REFCOUNTER));
+
+	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
+	v *= 125<<1;
+	do_div(v, 3<<1);
+
+	return v;
+}
diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/plat-versatile/timer-sp.c
new file mode 100644
index 0000000..fb0d1c2
--- /dev/null
+++ b/arch/arm/plat-versatile/timer-sp.c
@@ -0,0 +1,156 @@
+/*
+ *  linux/arch/arm/plat-versatile/timer-sp.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/arm_timer.h>
+
+#include <plat/timer-sp.h>
+
+/*
+ * These timers are currently always setup to be clocked at 1MHz.
+ */
+#define TIMER_FREQ_KHZ	(1000)
+#define TIMER_RELOAD	(TIMER_FREQ_KHZ * 1000 / HZ)
+
+static void __iomem *clksrc_base;
+
+static cycle_t sp804_read(struct clocksource *cs)
+{
+	return ~readl(clksrc_base + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_sp804 = {
+	.name		= "timer3",
+	.rating		= 200,
+	.read		= sp804_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sp804_clocksource_init(void __iomem *base)
+{
+	struct clocksource *cs = &clocksource_sp804;
+
+	clksrc_base = base;
+
+	/* setup timer 0 as free-running clocksource */
+	writel(0, clksrc_base + TIMER_CTRL);
+	writel(0xffffffff, clksrc_base + TIMER_LOAD);
+	writel(0xffffffff, clksrc_base + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+		clksrc_base + TIMER_CTRL);
+
+	cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift);
+	clocksource_register(cs);
+}
+
+
+static void __iomem *clkevt_base;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* clear the interrupt */
+	writel(1, clkevt_base + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void sp804_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl |= TIMER_CTRL_ONESHOT;
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		break;
+	}
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int sp804_set_next_event(unsigned long next,
+	struct clock_event_device *evt)
+{
+	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+	writel(next, clkevt_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device sp804_clockevent = {
+	.name		= "timer0",
+	.shift		= 32,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= sp804_set_mode,
+	.set_next_event	= sp804_set_next_event,
+	.rating		= 300,
+	.cpumask	= cpu_all_mask,
+};
+
+static struct irqaction sp804_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= sp804_timer_interrupt,
+	.dev_id		= &sp804_clockevent,
+};
+
+void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+{
+	struct clock_event_device *evt = &sp804_clockevent;
+
+	clkevt_base = base;
+
+	evt->irq = timer_irq;
+	evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
+	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+	setup_irq(timer_irq, &sp804_timer_irq);
+	clockevents_register_device(evt);
+}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 5a79fc6..48cbdcb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jan 28 22:15:54 2010
+# Last update: Mon Jul 12 21:10:14 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1994,7 +1994,7 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
 sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
 hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
 sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
@@ -2257,7 +2257,7 @@ oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
+vexpress		MACH_VEXPRESS		VEXPRESS		2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2609,7 +2609,7 @@ fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-sheevad			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_SHEEVAD		SHEEVAD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2636,3 +2636,317 @@ hw90240			MACH_HW90240		HW90240			2648
 dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
 mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
 scat110			MACH_SCAT110		SCAT110			2651
+acer_a1			MACH_ACER_A1		ACER_A1			2652
+cmcontrol		MACH_CMCONTROL		CMCONTROL		2653
+pelco_lamar		MACH_PELCO_LAMAR	PELCO_LAMAR		2654
+rfp43			MACH_RFP43		RFP43			2655
+sk86r0301		MACH_SK86R0301		SK86R0301		2656
+ctpxa			MACH_CTPXA		CTPXA			2657
+epb_arm9_a		MACH_EPB_ARM9_A		EPB_ARM9_A		2658
+guruplug		MACH_GURUPLUG		GURUPLUG		2659
+spear310		MACH_SPEAR310		SPEAR310		2660
+spear320		MACH_SPEAR320		SPEAR320		2661
+robotx			MACH_ROBOTX		ROBOTX			2662
+lsxhl			MACH_LSXHL		LSXHL			2663
+smartlite		MACH_SMARTLITE		SMARTLITE		2664
+cws2			MACH_CWS2		CWS2			2665
+m619			MACH_M619		M619			2666
+smartview		MACH_SMARTVIEW		SMARTVIEW		2667
+lsa_salsa		MACH_LSA_SALSA		LSA_SALSA		2668
+kizbox			MACH_KIZBOX		KIZBOX			2669
+htccharmer		MACH_HTCCHARMER		HTCCHARMER		2670
+guf_neso_lt		MACH_GUF_NESO_LT	GUF_NESO_LT		2671
+pm9g45			MACH_PM9G45		PM9G45			2672
+htcpanther		MACH_HTCPANTHER		HTCPANTHER		2673
+htcpanther_cdma		MACH_HTCPANTHER_CDMA	HTCPANTHER_CDMA		2674
+reb01			MACH_REB01		REB01			2675
+aquila			MACH_AQUILA		AQUILA			2676
+spark_sls_hw2		MACH_SPARK_SLS_HW2	SPARK_SLS_HW2		2677
+sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
+msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
+micro2440		MACH_MICRO2440		MICRO2440		2680
+am2440			MACH_AM2440		AM2440			2681
+tq2440			MACH_TQ2440		TQ2440			2682
+lpc2478oem		MACH_LPC2478OEM		LPC2478OEM		2683
+ak880x			MACH_AK880X		AK880X			2684
+cobra3530		MACH_COBRA3530		COBRA3530		2685
+pmppb			MACH_PMPPB		PMPPB			2686
+u6715			MACH_U6715		U6715			2687
+axar1500_sender		MACH_AXAR1500_SENDER	AXAR1500_SENDER		2688
+g30_dvb			MACH_G30_DVB		G30_DVB			2689
+vc088x			MACH_VC088X		VC088X			2690
+mioa702			MACH_MIOA702		MIOA702			2691
+hpmin			MACH_HPMIN		HPMIN			2692
+ak880xak		MACH_AK880XAK		AK880XAK		2693
+arm926tomap850		MACH_ARM926TOMAP850	ARM926TOMAP850		2694
+lkevm			MACH_LKEVM		LKEVM			2695
+mw6410			MACH_MW6410		MW6410			2696
+terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
+cpu8000e		MACH_CPU8000E		CPU8000E		2698
+catania			MACH_CATANIA		CATANIA			2699
+tokyo			MACH_TOKYO		TOKYO			2700
+msm7201a_surf		MACH_MSM7201A_SURF	MSM7201A_SURF		2701
+msm7201a_ffa		MACH_MSM7201A_FFA	MSM7201A_FFA		2702
+msm7x25_surf		MACH_MSM7X25_SURF	MSM7X25_SURF		2703
+msm7x25_ffa		MACH_MSM7X25_FFA	MSM7X25_FFA		2704
+msm7x27_surf		MACH_MSM7X27_SURF	MSM7X27_SURF		2705
+msm7x27_ffa		MACH_MSM7X27_FFA	MSM7X27_FFA		2706
+msm7x30_ffa		MACH_MSM7X30_FFA	MSM7X30_FFA		2707
+qsd8x50_surf		MACH_QSD8X50_SURF	QSD8X50_SURF		2708
+qsd8x50_comet		MACH_QSD8X50_COMET	QSD8X50_COMET		2709
+qsd8x50_ffa		MACH_QSD8X50_FFA	QSD8X50_FFA		2710
+qsd8x50a_surf		MACH_QSD8X50A_SURF	QSD8X50A_SURF		2711
+qsd8x50a_ffa		MACH_QSD8X50A_FFA	QSD8X50A_FFA		2712
+adx_xgcp10		MACH_ADX_XGCP10		ADX_XGCP10		2713
+mcgwumts2a		MACH_MCGWUMTS2A		MCGWUMTS2A		2714
+mobikt			MACH_MOBIKT		MOBIKT			2715
+mx53_evk		MACH_MX53_EVK		MX53_EVK		2716
+igep0030		MACH_IGEP0030		IGEP0030		2717
+axell_h40_h50_ctrl	MACH_AXELL_H40_H50_CTRL	AXELL_H40_H50_CTRL	2718
+dtcommod		MACH_DTCOMMOD		DTCOMMOD		2719
+gould			MACH_GOULD		GOULD			2720
+siberia			MACH_SIBERIA		SIBERIA			2721
+sbc3530			MACH_SBC3530		SBC3530			2722
+qarm			MACH_QARM		QARM			2723
+mips			MACH_MIPS		MIPS			2724
+mx27grb			MACH_MX27GRB		MX27GRB			2725
+sbc8100			MACH_SBC8100		SBC8100			2726
+saarb			MACH_SAARB		SAARB			2727
+omap3mini		MACH_OMAP3MINI		OMAP3MINI		2728
+cnmbook7se		MACH_CNMBOOK7SE		CNMBOOK7SE		2729
+catan			MACH_CATAN		CATAN			2730
+harmony			MACH_HARMONY		HARMONY			2731
+tonga			MACH_TONGA		TONGA			2732
+cybook_orizon		MACH_CYBOOK_ORIZON	CYBOOK_ORIZON		2733
+htcrhodiumcdma		MACH_HTCRHODIUMCDMA	HTCRHODIUMCDMA		2734
+epc_g45			MACH_EPC_G45		EPC_G45			2735
+epc_lpc3250		MACH_EPC_LPC3250	EPC_LPC3250		2736
+mxc91341evb		MACH_MXC91341EVB	MXC91341EVB		2737
+rtw1000			MACH_RTW1000		RTW1000			2738
+bobcat			MACH_BOBCAT		BOBCAT			2739
+trizeps6		MACH_TRIZEPS6		TRIZEPS6		2740
+msm7x30_fluid		MACH_MSM7X30_FLUID	MSM7X30_FLUID		2741
+nedap9263		MACH_NEDAP9263		NEDAP9263		2742
+netgear_ms2110		MACH_NETGEAR_MS2110	NETGEAR_MS2110		2743
+bmx			MACH_BMX		BMX			2744
+netstream		MACH_NETSTREAM		NETSTREAM		2745
+vpnext_rcu		MACH_VPNEXT_RCU		VPNEXT_RCU		2746
+vpnext_mpu		MACH_VPNEXT_MPU		VPNEXT_MPU		2747
+bcmring_tablet_v1	MACH_BCMRING_TABLET_V1	BCMRING_TABLET_V1	2748
+sgarm10			MACH_SGARM10		SGARM10			2749
+cm_t3517		MACH_CM_T3517		CM_T3517		2750
+omap3_cps		MACH_OMAP3_CPS		OMAP3_CPS		2751
+axar1500_receiver	MACH_AXAR1500_RECEIVER	AXAR1500_RECEIVER	2752
+wbd222			MACH_WBD222		WBD222			2753
+mt65xx			MACH_MT65XX		MT65XX			2754
+msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
+msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
+vmc300			MACH_VMC300		VMC300			2757
+tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
+nanos			MACH_NANOS		NANOS			2759
+stamp9g10		MACH_STAMP9G10		STAMP9G10		2760
+stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
+h6053			MACH_H6053		H6053			2762
+smint01			MACH_SMINT01		SMINT01			2763
+prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
+ap420			MACH_AP420		AP420			2765
+htcshift		MACH_HTCSHIFT		HTCSHIFT		2766
+davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
+msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
+msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
+esl_vamana		MACH_ESL_VAMANA		ESL_VAMANA		2770
+sbc35			MACH_SBC35		SBC35			2771
+mpx6446			MACH_MPX6446		MPX6446			2772
+oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
+kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
+ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
+cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
+lpc2			MACH_LPC2		LPC2			2777
+olympus			MACH_OLYMPUS		OLYMPUS			2778
+vortex			MACH_VORTEX		VORTEX			2779
+s5pc200			MACH_S5PC200		S5PC200			2780
+ecucore_9263		MACH_ECUCORE_9263	ECUCORE_9263		2781
+smdkc200		MACH_SMDKC200		SMDKC200		2782
+emsiso_sx27		MACH_EMSISO_SX27	EMSISO_SX27		2783
+apx_som9g45_ek		MACH_APX_SOM9G45_EK	APX_SOM9G45_EK		2784
+songshan		MACH_SONGSHAN		SONGSHAN		2785
+tianshan		MACH_TIANSHAN		TIANSHAN		2786
+vpx500			MACH_VPX500		VPX500			2787
+am3517sam		MACH_AM3517SAM		AM3517SAM		2788
+skat91_sim508		MACH_SKAT91_SIM508	SKAT91_SIM508		2789
+skat91_s3e		MACH_SKAT91_S3E		SKAT91_S3E		2790
+omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
+df7220			MACH_DF7220		DF7220			2792
+nemini			MACH_NEMINI		NEMINI			2793
+t8200			MACH_T8200		T8200			2794
+apf51			MACH_APF51		APF51			2795
+dr_rc_unit		MACH_DR_RC_UNIT		DR_RC_UNIT		2796
+bordeaux		MACH_BORDEAUX		BORDEAUX		2797
+catania_b		MACH_CATANIA_B		CATANIA_B		2798
+mx51_ocean		MACH_MX51_OCEAN		MX51_OCEAN		2799
+ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
+neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
+withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
+dbps			MACH_DBPS		DBPS			2803
+sbc9261			MACH_SBC9261		SBC9261			2804
+pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
+speedy			MACH_SPEEDY		SPEEDY			2806
+chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
+tango			MACH_TANGO		TANGO			2808
+synology_dsx11		MACH_SYNOLOGY_DSX11	SYNOLOGY_DSX11		2809
+hanlin_v3ext		MACH_HANLIN_V3EXT	HANLIN_V3EXT		2810
+hanlin_v5		MACH_HANLIN_V5		HANLIN_V5		2811
+hanlin_v3plus		MACH_HANLIN_V3PLUS	HANLIN_V3PLUS		2812
+iriver_story		MACH_IRIVER_STORY	IRIVER_STORY		2813
+irex_iliad		MACH_IREX_ILIAD		IREX_ILIAD		2814
+irex_dr1000		MACH_IREX_DR1000	IREX_DR1000		2815
+teton_bga		MACH_TETON_BGA		TETON_BGA		2816
+snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
+tam3517			MACH_TAM3517		TAM3517			2818
+pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
+fuji			MACH_FUJI		FUJI			2875
+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
+em1sy			MACH_EM1SY		EM1SY			2877
+m502			MACH_M502		M502			2878
+matrix518		MACH_MATRIX518		MATRIX518		2879
+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
+spear1310		MACH_SPEAR1310		SPEAR1310		2881
+bv07			MACH_BV07		BV07			2882
+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
+devixp			MACH_DEVIXP		DEVIXP			2885
+miccpt			MACH_MICCPT		MICCPT			2886
+mic256			MACH_MIC256		MIC256			2887
+as1167			MACH_AS1167		AS1167			2888
+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
+u5500			MACH_U5500		U5500			2890
+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
+mecha			MACH_MECHA		MECHA			2892
+bubba3			MACH_BUBBA3		BUBBA3			2893
+pupitre			MACH_PUPITRE		PUPITRE			2894
+tegra_harmony		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
+simplenet		MACH_SIMPLENET		SIMPLENET		2898
+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
+pec_tc			MACH_PEC_TC		PEC_TC			2900
+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
+blueshark		MACH_BLUESHARK		BLUESHARK		2907
+e10			MACH_E10		E10			2908
+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
+pov15hd			MACH_POV15HD		POV15HD			2910
+stella			MACH_STELLA		STELLA			2911
+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
+netwalker		MACH_NETWALKER		NETWALKER		2914
+acsx106			MACH_ACSX106		ACSX106			2915
+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
+nsb3ast			MACH_NSB3AST		NSB3AST			2917
+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
+af4000			MACH_AF4000		AF4000			2919
+ark9431			MACH_ARK9431		ARK9431			2920
+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
+oratisaes		MACH_ORATISAES		ORATISAES		2924
+smdkv310		MACH_SMDKV310		SMDKV310		2925
+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
+ventana			MACH_VENTANA		VENTANA			2927
+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
+mimas			MACH_MIMAS		MIMAS			2930
+titan			MACH_TITAN		TITAN			2931
+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
+es2440			MACH_ES2440		ES2440			2933
+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
+jigen301		MACH_JIGEN		JIGEN			2937
+smdk6450		MACH_SMDK6450		SMDK6450		2938
+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
+ns2416			MACH_NS2416		NS2416			2940
+rpc353			MACH_RPC353		RPC353			2941
+tq6410			MACH_TQ6410		TQ6410			2942
+sky6410			MACH_SKY6410		SKY6410			2943
+dynasty			MACH_DYNASTY		DYNASTY			2944
+vivo			MACH_VIVO		VIVO			2945
+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
+basi			MACH_BASI		BASI			2948
+tn200			MACH_TN200		TN200			2949
+c2mmi			MACH_C2MMI		C2MMI			2950
+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
+tube			MACH_TUBE		TUBE			2953
+messina			MACH_MESSINA		MESSINA			2954
+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
+cetus9263		MACH_CETUS9263		CETUS9263		2956
+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
+vmx25			MACH_VMX25		VMX25			2958
+vmx51			MACH_VMX51		VMX51			2959
+abacus			MACH_ABACUS		ABACUS			2960
+cm4745			MACH_CM4745		CM4745			2961
+oratislink		MACH_ORATISLINK		ORATISLINK		2962
+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
+netviz			MACH_NETVIZ		NETVIZ			2964
+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 66dc2d0..d66cead 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -277,7 +277,7 @@ ENTRY(vfp_put_double)
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
 	mov	pc, lr
 	.org	1b + 8
 	.endr
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a540..315a540 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 	}
 
 	/*
-	 * Update the FPSCR with the additional exception flags.
+	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
+	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
 	fpscr |= exceptions;
 
 	fmxr(FPSCR, fpscr);
@@ -425,54 +428,60 @@ static void vfp_pm_init(void)
 static inline void vfp_pm_init(void) { }
 #endif /* CONFIG_PM */
 
-/*
- * Synchronise the hardware VFP state of a thread other than current with the
- * saved one. This function is used by the ptrace mechanism.
- */
-#ifdef CONFIG_SMP
-void vfp_sync_state(struct thread_info *thread)
+void vfp_sync_hwstate(struct thread_info *thread)
 {
+	unsigned int cpu = get_cpu();
+
 	/*
-	 * On SMP systems, the VFP state is automatically saved at every
-	 * context switch. We mark the thread VFP state as belonging to a
-	 * non-existent CPU so that the saved one will be reloaded when
-	 * needed.
+	 * If the thread we're interested in is the current owner of the
+	 * hardware VFP state, then we need to save its state.
 	 */
-	thread->vfpstate.hard.cpu = NR_CPUS;
+	if (last_VFP_context[cpu] == &thread->vfpstate) {
+		u32 fpexc = fmrx(FPEXC);
+
+		/*
+		 * Save the last VFP state on this CPU.
+		 */
+		fmxr(FPEXC, fpexc | FPEXC_EN);
+		vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
+		fmxr(FPEXC, fpexc);
+	}
+
+	put_cpu();
 }
-#else
-void vfp_sync_state(struct thread_info *thread)
+
+void vfp_flush_hwstate(struct thread_info *thread)
 {
 	unsigned int cpu = get_cpu();
-	u32 fpexc = fmrx(FPEXC);
 
 	/*
-	 * If VFP is enabled, the previous state was already saved and
-	 * last_VFP_context updated.
+	 * If the thread we're interested in is the current owner of the
+	 * hardware VFP state, then we need to save its state.
 	 */
-	if (fpexc & FPEXC_EN)
-		goto out;
+	if (last_VFP_context[cpu] == &thread->vfpstate) {
+		u32 fpexc = fmrx(FPEXC);
 
-	if (!last_VFP_context[cpu])
-		goto out;
+		fmxr(FPEXC, fpexc & ~FPEXC_EN);
 
-	/*
-	 * Save the last VFP state on this CPU.
-	 */
-	fmxr(FPEXC, fpexc | FPEXC_EN);
-	vfp_save_state(last_VFP_context[cpu], fpexc);
-	fmxr(FPEXC, fpexc);
+		/*
+		 * Set the context to NULL to force a reload the next time
+		 * the thread uses the VFP.
+		 */
+		last_VFP_context[cpu] = NULL;
+	}
 
+#ifdef CONFIG_SMP
 	/*
-	 * Set the context to NULL to force a reload the next time the thread
-	 * uses the VFP.
+	 * For SMP we still have to take care of the case where the thread
+	 * migrates to another CPU and then back to the original CPU on which
+	 * the last VFP user is still the same thread. Mark the thread VFP
+	 * state as belonging to a non-existent CPU so that the saved one will
+	 * be reloaded in the above case.
 	 */
-	last_VFP_context[cpu] = NULL;
-
-out:
+	thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
 	put_cpu();
 }
-#endif
 
 #include <linux/smp.h>
 
@@ -525,7 +534,7 @@ static int __init vfp_init(void)
 		 */
 		elf_hwcap |= HWCAP_VFP;
 #ifdef CONFIG_VFPv3
-		if (VFP_arch >= 3) {
+		if (VFP_arch >= 2) {
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
index b131c27..bbce6a1 100644
--- a/arch/avr32/include/asm/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
@@ -19,7 +19,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 /*
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index 0cf2c0a..e6ac0b6 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -54,6 +54,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
index fecdda1..a9ae30c 100644
--- a/arch/avr32/include/asm/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
@@ -325,7 +325,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 struct vm_area_struct;
 extern void update_mmu_cache(struct vm_area_struct * vma,
-			     unsigned long address, pte_t pte);
+			     unsigned long address, pte_t *ptep);
 
 /*
  * Encode and decode a swap entry
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
index 9e2d44f..e53dd0d 100644
--- a/arch/avr32/include/asm/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
@@ -124,6 +124,8 @@ struct pt_regs {
 
 #include <asm/ocd.h>
 
+#define arch_has_single_step()		(1)
+
 #define arch_ptrace_attach(child)       ocd_enable(child)
 
 #define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 377320e..06394e5 100644
--- a/arch/avr32/include/asm/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -1,25 +1,7 @@
 #ifndef __ASM_AVR32_SCATTERLIST_H
 #define __ASM_AVR32_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-   unsigned long	sg_magic;
-#endif
-    unsigned long	page_link;
-    unsigned int	offset;
-    dma_addr_t		dma_address;
-    unsigned int	length;
-};
-
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0xffffffff)
 
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index fd0c5d7..7a9c03d 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -81,7 +81,7 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_BREAKPOINT		4	/* enter monitor mode on return */
 #define TIF_SINGLE_STEP		5	/* single step in progress */
-#define TIF_MEMDIE		6
+#define TIF_MEMDIE		6	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
 #define TIF_NOTIFY_RESUME	9	/* callback before returning to user */
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 93c0342..2d76515 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -11,6 +11,7 @@
 #include <linux/fs.h>
 #include <linux/pm.h>
 #include <linux/ptrace.h>
+#include <linux/slab.h>
 #include <linux/reboot.h>
 #include <linux/tick.h>
 #include <linux/uaccess.h>
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index 1fed38f..5e73c25 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -28,9 +28,9 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk)
 				  THREAD_SIZE - sizeof(struct pt_regs));
 }
 
-static void ptrace_single_step(struct task_struct *tsk)
+void user_enable_single_step(struct task_struct *tsk)
 {
-	pr_debug("ptrace_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
+	pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
 		 tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
 
 	/*
@@ -49,6 +49,11 @@ static void ptrace_single_step(struct task_struct *tsk)
 	set_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
 }
 
+void user_disable_single_step(struct task_struct *child)
+{
+	/* XXX(hch): a no-op here seems wrong.. */
+}
+
 /*
  * Called by kernel/ptrace.c when detaching
  *
@@ -167,50 +172,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal */
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* XXX: Are we sure no breakpoints are active here? */
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * Make the child exit. Best I can do is send it a
-	 * SIGKILL. Perhaps it should be put in the status that it
-	 * wants to exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_single_step(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index f27aa3b..668ed28 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -110,17 +110,17 @@ static struct clock_event_device comparator = {
 	.set_mode	= comparator_mode,
 };
 
+void read_persistent_clock(struct timespec *ts)
+{
+	ts->tv_sec = mktime(2007, 1, 1, 0, 0, 0);
+	ts->tv_nsec = 0;
+}
+
 void __init time_init(void)
 {
 	unsigned long counter_hz;
 	int ret;
 
-	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
-	xtime.tv_nsec = 0;
-
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
-
 	/* figure rate for counter */
 	counter_hz = clk_get_rate(boot_cpu_data.clk);
 	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 1aa1ea5..e67c999 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
@@ -1325,7 +1326,7 @@ struct platform_device *__init
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct platform_device		*pdev;
-	struct mci_dma_slave		*slave;
+	struct mci_dma_data	        *slave;
 	u32				pioa_mask;
 	u32				piob_mask;
 
@@ -1344,7 +1345,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 				ARRAY_SIZE(atmel_mci0_resource)))
 		goto fail;
 
-	slave = kzalloc(sizeof(struct mci_dma_slave), GFP_KERNEL);
+	slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+	if (!slave)
+		goto fail;
 
 	slave->sdata.dma_dev = &dw_dmac0_device.dev;
 	slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
@@ -1357,7 +1360,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct mci_platform_data)))
-		goto fail;
+		goto fail_free;
 
 	/* CLK line is common to both slots */
 	pioa_mask = 1 << 10;
@@ -1381,7 +1384,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		/* Slot is unused */
 		break;
 	default:
-		goto fail;
+		goto fail_free;
 	}
 
 	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
@@ -1408,7 +1411,7 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		break;
 	default:
 		if (!data->slot[0].bus_width)
-			goto fail;
+			goto fail_free;
 
 		data->slot[1].bus_width = 0;
 		break;
@@ -1419,9 +1422,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	platform_device_add(pdev);
 	return pdev;
 
+fail_free:
+	kfree(slave);
 fail:
 	data->dma_slave = NULL;
-	kfree(slave);
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -1767,10 +1771,13 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 					  ARRAY_SIZE(usba0_resource)))
 		goto out_free_pdev;
 
-	if (data)
+	if (data) {
 		usba_data.pdata.vbus_pin = data->vbus_pin;
-	else
+		usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted;
+	} else {
 		usba_data.pdata.vbus_pin = -EINVAL;
+		usba_data.pdata.vbus_pin_inverted = -EINVAL;
+	}
 
 	data = &usba_data.pdata;
 	data->num_ep = ARRAY_SIZE(at32_usba_ep);
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
index 310477b..e9d1205 100644
--- a/arch/avr32/mach-at32ap/extint.c
+++ b/arch/avr32/mach-at32ap/extint.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/random.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index 2875c11..f7672d3 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <mach/smc.h>
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index c7f25bb..6174020 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -5,6 +5,7 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
+#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -35,6 +36,7 @@ struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
index 6d8c794..3c00422 100644
--- a/arch/avr32/mm/dma-coherent.c
+++ b/arch/avr32/mm/dma-coherent.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/gfp.h>
 
 #include <asm/addrspace.h>
 #include <asm/cacheflush.h>
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 9492564..a7314d4 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/init.h>
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index f03b79f..7def0d8 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/pgtable.h>
 #include <asm/addrspace.h>
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index 06677be..0da2310 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -101,7 +101,7 @@ static void update_dtlb(unsigned long address, pte_t pte)
 }
 
 void update_mmu_cache(struct vm_area_struct *vma,
-		      unsigned long address, pte_t pte)
+		      unsigned long address, pte_t *ptep)
 {
 	unsigned long flags;
 
@@ -110,7 +110,7 @@ void update_mmu_cache(struct vm_area_struct *vma,
 		return;
 
 	local_irq_save(flags);
-	update_dtlb(address, pte);
+	update_dtlb(address, *ptep);
 	local_irq_restore(flags);
 }
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 53c1e1d..f66294b 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -23,12 +23,15 @@ config RWSEM_XCHGADD_ALGORITHM
 
 config BLACKFIN
 	def_bool y
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_IDE
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_BZIP2
-	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_GZIP if RAMKERNEL
+	select HAVE_KERNEL_BZIP2 if RAMKERNEL
+	select HAVE_KERNEL_LZMA if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
@@ -45,9 +48,6 @@ config ZONE_DMA
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
-config GENERIC_HWEIGHT
-	def_bool y
-
 config GENERIC_HARDIRQS
 	def_bool y
 
@@ -239,7 +239,7 @@ endchoice
 
 config SMP
 	depends on BF561
-	select GENERIC_CLOCKEVENTS
+	select TICKSOURCE_CORETMR
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -253,11 +253,20 @@ config NR_CPUS
 	depends on SMP
 	default 2 if BF561
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && HOTPLUG
+	default y
+
 config IRQ_PER_CPU
 	bool
 	depends on SMP
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+	depends on SMP
+
 config BF_REV_MIN
 	int
 	default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
@@ -339,7 +348,7 @@ config MEM_MT48LC16M16A2TG_75
 
 config MEM_MT48LC32M8A2_75
 	bool
-	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
+	depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
 	default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -349,12 +358,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
-	default y
-
-config MEM_MT48LC32M8A2_75
-	bool
-	depends on (BFIN518F_EZBRD)
+	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
 config MEM_MT48H32M16LFCJ_75
@@ -401,10 +405,18 @@ config BOOT_LOAD
 config ROM_BASE
 	hex "Kernel ROM Base"
 	depends on ROMKERNEL
-	default "0x20040000"
+	default "0x20040040"
 	range 0x20000000 0x20400000 if !(BF54x || BF561)
 	range 0x20000000 0x30000000 if (BF54x || BF561)
 	help
+	  Make sure your ROM base does not include any file-header
+	  information that is prepended to the kernel.
+
+	  For example, the bootable U-Boot format (created with
+	  mkimage) has a 64 byte header (0x40).  So while the image
+	  you write to flash might start at say 0x20080000, you have
+	  to add 0x40 to get the kernel's ROM base as it will come
+	  after the header.
 
 comment "Clock/PLL Setup"
 
@@ -448,7 +460,7 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
@@ -609,23 +621,23 @@ config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
 	default y
 
-choice
-	prompt "Kernel Tick Source"
+menu "Clock event device"
 	depends on GENERIC_CLOCKEVENTS
-	default TICKSOURCE_CORETMR
-
 config TICKSOURCE_GPTMR0
-	bool "Gptimer0 (SCLK domain)"
+	bool "GPTimer0"
+	depends on !SMP
 	select BFIN_GPTIMERS
 
 config TICKSOURCE_CORETMR
-	bool "Core timer (CCLK domain)"
-
-endchoice
+	bool "Core timer"
+	default y
+endmenu
 
-config CYCLES_CLOCKSOURCE
-	bool "Use 'CYCLES' as a clocksource"
+menu "Clock souce"
 	depends on GENERIC_CLOCKEVENTS
+config CYCLES_CLOCKSOURCE
+	bool "CYCLES"
+	default y
 	depends on !BFIN_SCRATCH_REG_CYCLES
 	depends on !SMP
 	help
@@ -636,10 +648,10 @@ config CYCLES_CLOCKSOURCE
 	  writing the registers will most likely crash the kernel.
 
 config GPTMR0_CLOCKSOURCE
-	bool "Use GPTimer0 as a clocksource"
+	bool "GPTimer0"
 	select BFIN_GPTIMERS
-	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
+endmenu
 
 config ARCH_USES_GETTIMEOFFSET
 	depends on !GENERIC_CLOCKEVENTS
@@ -774,6 +786,34 @@ config MEMCPY_L1
 	  If enabled, the memcpy function is linked
 	  into L1 instruction memory. (less latency)
 
+config STRCMP_L1
+	bool "locate strcmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCMP_L1
+	bool "locate strncmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRCPY_L1
+	bool "locate strcpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcpy function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCPY_L1
+	bool "locate strncpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncpy function is linked
+	  into L1 instruction memory (less latency).
+
 config SYS_BFIN_SPINLOCK_L1
 	bool "Locate sys_bfin_spinlock function in L1 Memory"
 	default y
@@ -1116,24 +1156,6 @@ config PCI
 
 source "drivers/pci/Kconfig"
 
-config HOTPLUG
-	bool "Support for hot-pluggable device"
-	  help
-	  Say Y here if you want to plug devices into your computer while
-	  the system is running, and be able to use them quickly.  In many
-	  cases, the devices can likewise be unplugged at any time too.
-
-	  One well known example of this is PCMCIA- or PC-cards, credit-card
-	  size devices such as network cards, modems or hard drives which are
-	  plugged into slots found on all modern laptop computers.  Another
-	  example, used on modern desktops as well as laptops, is USB.
-
-	  Enable HOTPLUG and build a modular kernel.  Get agent software
-	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
-	  Then your kernel will automatically call out to a user mode "policy
-	  agent" (/sbin/hotplug) to load modules and set up software needed
-	  to use devices as you hotplug them.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
@@ -1147,7 +1169,6 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options"
-	depends on !SMP
 
 source "kernel/power/Kconfig"
 
@@ -1189,32 +1210,6 @@ config  PM_BFIN_SLEEP
 	  If unsure, select "Sleep Deeper".
 endchoice
 
-config PM_WAKEUP_BY_GPIO
-	bool "Allow Wakeup from Standby by GPIO"
-	depends on PM && !BF54x
-
-config PM_WAKEUP_GPIO_NUMBER
-	int "GPIO number"
-	range 0 47
-	depends on PM_WAKEUP_BY_GPIO
-	default 2
-
-choice
-	prompt "GPIO Polarity"
-	depends on PM_WAKEUP_BY_GPIO
-	default PM_WAKEUP_GPIO_POLAR_H
-config  PM_WAKEUP_GPIO_POLAR_H
-	bool "Active High"
-config  PM_WAKEUP_GPIO_POLAR_L
-	bool "Active Low"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_F
-	bool "Falling EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_R
-	bool "Rising EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_B
-	bool "Both EDGE"
-endchoice
-
 comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 	depends on PM
 
@@ -1240,7 +1235,6 @@ config PM_BFIN_WAKE_GP
 endmenu
 
 menu "CPU Frequency scaling"
-	depends on !SMP
 
 source "drivers/cpufreq/Kconfig"
 
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 87f195e..d1825cb 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -18,9 +18,6 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
-config HAVE_ARCH_KGDB
-	def_bool y
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
@@ -238,6 +235,15 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
+config NMI_WATCHDOG
+	bool "Enable NMI watchdog to help debugging lockup on SMP"
+	default n
+	depends on SMP
+	help
+	  If any CPU in the system does not execute the period local timer
+	  interrupt for more than 5 seconds, then the NMI handler dumps debug
+	  information. This information can be used to debug the lockup.
+
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
@@ -258,4 +264,13 @@ config BFIN_ISRAM_SELF_TEST
 	help
 	  Run some self tests of the isram driver code at boot.
 
+config BFIN_PSEUDODBG_INSNS
+	bool "Support pseudo debug instructions"
+	default n
+	help
+	  This option allows the kernel to emulate some pseudo instructions which
+	  allow simulator test cases to be run under Linux with no changes.
+
+	  Most people should say N here.
+
 endmenu
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index f7ef923..9d5ffaf 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -14,6 +14,9 @@ OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
 
 KBUILD_CFLAGS           += $(call cc-option,-mno-fdpic)
+ifeq ($(CONFIG_ROMKERNEL),y)
+KBUILD_CFLAGS           += -mlong-calls
+endif
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 KBUILD_CFLAGS_MODULE    += -mlong-calls
 KBUILD_LDFLAGS_MODULE   += -m elf32bfin
@@ -130,7 +133,6 @@ KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
 
 archclean:
@@ -138,7 +140,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -156,6 +158,7 @@ define archhelp
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
+  echo  '  vmImage.xip     - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                     (distribution) PATH: $(INSTALLKERNEL) or'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index e9c48c6..d1b3d60 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,14 +8,18 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip
+
+UIMAGE_OPTS-y :=
+UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD)
+UIMAGE_OPTS-$(CONFIG_ROMKERNEL) += -a $(CONFIG_ROM_BASE) -x
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+                   -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' \
                    -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-                   -d $< $@
+                   $(UIMAGE_OPTS-y) -d $< $@
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -29,6 +33,12 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+# The mkimage tool wants 64bytes prepended to the image
+quiet_cmd_mk_bin_xip = BIN     $@
+      cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@
+$(obj)/vmlinux.bin.xip: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,mk_bin_xip)
+
 $(obj)/vmImage.bin: $(obj)/vmlinux.bin
 	$(call if_changed,uimage,none)
 
@@ -41,10 +51,15 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip
+	$(call if_changed,uimage,none)
+
 suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_ROMKERNEL)    := xip
+
 $(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index e315594..cf7c9bc 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF518=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -154,8 +182,8 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF51x=y
 CONFIG_MEM_MT48LC32M8A2_75=y
+CONFIG_BF51x=y
 CONFIG_BFIN518F_EZBRD=y
 
 #
@@ -313,7 +341,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -322,16 +349,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -342,7 +371,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -398,11 +427,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -426,7 +450,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -437,6 +460,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -450,7 +474,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -461,13 +488,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -488,6 +510,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -545,6 +568,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -560,6 +584,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -576,10 +605,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -614,6 +653,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -622,10 +664,14 @@ CONFIG_BFIN_MAC=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+CONFIG_BFIN_MAC_USE_HWSTAMP=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -634,15 +680,16 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -677,7 +724,10 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -688,16 +738,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -715,6 +762,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -726,12 +774,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -739,6 +785,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -771,14 +818,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -795,13 +834,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -817,6 +861,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -827,11 +872,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -853,28 +902,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -912,10 +953,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=m
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -950,6 +992,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -961,6 +1004,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -981,10 +1025,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -994,9 +1049,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1006,6 +1065,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1027,13 +1091,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1042,8 +1102,8 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1062,7 +1122,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1127,14 +1186,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1142,31 +1206,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1191,6 +1263,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1199,14 +1272,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1238,11 +1311,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1279,6 +1354,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1286,11 +1362,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1299,6 +1377,8 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 075e0fd..31c2a6d 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF526=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -154,8 +182,7 @@ CONFIG_BF_REV_0_0=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_MEM_MT48H32M16LFCJ_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_DMA0_ERROR=7
 CONFIG_IRQ_DMAR0_BLK=7
@@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_PORTF_INTA=13
 CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
 # CONFIG_BFIN527_EZKIT is not set
+# CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 CONFIG_BFIN526_EZBRD=y
 
@@ -318,7 +347,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -347,6 +377,10 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
+# Asynchronous Memory Configuration
+#
+
+#
 # EBIU_AMGCTL Global Control
 #
 CONFIG_C_AMCKEN=y
@@ -399,11 +433,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -427,7 +456,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -438,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -451,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -462,13 +494,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -489,6 +516,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -549,6 +577,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -564,11 +593,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_BF5XX is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -578,6 +602,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -595,10 +624,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -622,10 +661,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -642,6 +677,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -666,6 +702,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -675,9 +714,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -686,15 +728,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -744,7 +787,11 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -755,16 +802,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -782,6 +826,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -793,14 +838,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -808,6 +849,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -841,14 +883,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -865,13 +899,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -887,6 +926,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -897,11 +937,20 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -914,11 +963,13 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -934,17 +985,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -954,9 +1012,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -983,28 +1040,20 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,7 +1075,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1039,30 +1087,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1088,6 +1141,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
@@ -1118,18 +1172,17 @@ CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1165,7 +1218,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1177,6 +1229,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1212,6 +1271,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1223,6 +1283,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1243,10 +1304,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1256,9 +1328,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1268,6 +1344,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1291,13 +1372,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1316,17 +1393,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1345,7 +1413,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1360,7 +1427,7 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1410,14 +1477,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1425,31 +1497,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1474,6 +1554,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1482,15 +1563,15 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1522,11 +1603,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1563,6 +1646,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1570,11 +1654,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1584,6 +1670,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
new file mode 100644
index 0000000..d2dfcb0
--- /dev/null
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -0,0 +1,1811 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542_std is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544_std is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547_std is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548_std is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549_std is not set
+# CONFIG_BF549M is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TIMER0=8
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_EZKIT_V2=y
+# CONFIG_BFIN527_BLUETECHNIX_CM is not set
+# CONFIG_BFIN526_EZBRD is not set
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ADP5520=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
+CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+CONFIG_BFIN_SPORT=m
+# CONFIG_BFIN_TWI_LCD is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_UART0 is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5520 is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_ADP5520=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_BFIN_T350MCQB is not set
+CONFIG_FB_BFIN_LQ035Q1=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP5520 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_SPI=y
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BFIN_AD73322 is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_BF5XX_I2S=m
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+# CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
+CONFIG_SND_BF5XX_AC97=m
+CONFIG_SND_BF5XX_MMAP_SUPPORT=y
+# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
+CONFIG_SND_BF5XX_SOC_SPORT=m
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AD1980=m
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB Support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_ADP5520=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 6d1a623..edbb44d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,29 +160,28 @@ CONFIG_BF527=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
 CONFIG_MEM_MT48LC32M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_DMA0_ERROR=7
@@ -200,7 +227,9 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_PORTF_INTA=13
 CONFIG_IRQ_PORTF_INTB=13
+CONFIG_BF52x=y
 CONFIG_BFIN527_EZKIT=y
+# CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 # CONFIG_BFIN526_EZBRD is not set
 
@@ -318,7 +347,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -327,16 +355,18 @@ CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -347,7 +377,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -403,11 +433,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -431,7 +456,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -442,6 +466,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -455,7 +480,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -508,13 +536,8 @@ CONFIG_SIR_BFIN_DMA=y
 # CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -535,6 +558,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -593,6 +617,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -608,11 +633,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_BF5XX is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
@@ -622,6 +642,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -639,10 +664,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -666,10 +701,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -686,6 +717,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -710,6 +742,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -720,9 +755,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -731,15 +769,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -789,7 +828,11 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -800,16 +843,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -827,6 +867,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -838,14 +879,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -853,6 +890,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -886,14 +924,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,13 +940,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -932,6 +967,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -942,11 +978,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -973,28 +1013,21 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1030,15 +1063,18 @@ CONFIG_FB_BFIN_T350MCQB=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=m
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -1066,6 +1102,7 @@ CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -1074,6 +1111,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1084,7 +1126,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-# CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
@@ -1094,15 +1135,19 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 CONFIG_SND_BF5XX_SOC_SSM2602=m
 # CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_SSM2602=m
@@ -1110,7 +1155,6 @@ CONFIG_SND_SOC_SSM2602=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1123,30 +1167,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1172,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
@@ -1188,9 +1238,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_PERIPHERAL is not set
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -1202,18 +1250,17 @@ CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1249,7 +1296,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1261,6 +1307,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1296,6 +1349,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1307,6 +1361,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1327,10 +1382,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1340,9 +1406,13 @@ CONFIG_EXT2_FS=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1352,6 +1422,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1376,13 +1451,9 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1401,17 +1472,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1430,7 +1492,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1445,7 +1506,7 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1495,14 +1556,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1510,31 +1576,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1559,6 +1633,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1567,15 +1642,15 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1607,11 +1682,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1648,6 +1725,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1655,11 +1733,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1669,6 +1749,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 50f9a23..0b13d58 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF533=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
@@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -280,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -289,19 +316,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
-#
-# Cache Support
-#
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -312,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -358,6 +384,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -379,11 +406,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -407,7 +429,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -418,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -431,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -475,13 +500,8 @@ CONFIG_IRTTY_SIR=m
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -502,6 +522,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -559,6 +580,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -574,6 +596,11 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -590,9 +617,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -616,9 +648,12 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -627,15 +662,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -679,15 +715,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -701,6 +734,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -711,12 +745,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -734,13 +764,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -753,9 +788,6 @@ CONFIG_GPIO_SYSFS=y
 #
 # I2C GPIO expanders:
 #
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -766,11 +798,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -793,23 +829,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -826,14 +849,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -864,6 +885,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -884,10 +906,20 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -896,9 +928,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -908,6 +944,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -926,13 +967,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -951,17 +988,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -980,7 +1008,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1045,14 +1072,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1060,31 +1092,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1109,6 +1149,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1117,14 +1158,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1156,11 +1197,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1197,6 +1240,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1204,11 +1248,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1218,6 +1264,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 6c60c82..c3fe6e5 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_BF533=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=3
@@ -228,7 +256,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -280,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -289,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -309,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -355,6 +384,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -376,11 +406,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -404,7 +429,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -415,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -428,7 +453,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -474,13 +502,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -501,6 +524,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -560,6 +584,7 @@ CONFIG_MTD_BFIN_ASYNC=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -575,6 +600,11 @@ CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -591,10 +621,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -618,9 +658,12 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -629,15 +672,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -672,7 +716,10 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_CONFIG_INPUT_PCF8574=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -683,16 +730,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -706,6 +750,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -716,12 +761,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -729,6 +770,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -759,14 +801,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -783,13 +817,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -805,6 +844,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -815,11 +855,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -841,26 +885,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -904,6 +940,7 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -913,19 +950,27 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -936,13 +981,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73322=m
 CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
@@ -953,16 +991,20 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
 CONFIG_SND_BFIN_AD73311_SE=4
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_AD73311=m
@@ -970,14 +1012,12 @@ CONFIG_SND_SOC_AD73311=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1014,6 +1054,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1025,6 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1045,10 +1087,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1057,9 +1110,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1069,6 +1126,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1087,13 +1149,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1112,17 +1170,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1141,7 +1190,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1206,14 +1254,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1221,31 +1274,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1270,6 +1331,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1278,14 +1340,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1317,11 +1379,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1358,6 +1422,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1365,11 +1430,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1379,6 +1446,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 2908595..7596cf7 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_FREEZER=y
 CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
@@ -184,7 +212,8 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
@@ -235,7 +264,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -287,7 +316,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -296,16 +324,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -316,7 +346,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -362,6 +392,7 @@ CONFIG_PM=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
@@ -384,11 +415,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -412,7 +438,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -423,6 +448,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -436,14 +462,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -483,13 +529,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +551,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -568,6 +610,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -583,6 +626,11 @@ CONFIG_MTD_PHYSMAP=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -599,10 +647,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -637,6 +695,9 @@ CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -647,9 +708,12 @@ CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -658,15 +722,16 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -701,7 +766,10 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_CONFIG_INPUT_PCF8574=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -712,16 +780,13 @@ CONFIG_CONFIG_INPUT_PCF8574=m
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -735,6 +800,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -746,17 +812,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-CONFIG_CAN4LINUX=y
-
-#
-# linux embedded drivers
-#
-CONFIG_CAN_BLACKFIN=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -764,6 +821,7 @@ CONFIG_CAN_BLACKFIN=m
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -796,14 +854,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_SENSORS_AD5252=m
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -820,13 +870,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -842,6 +897,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -852,11 +908,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -878,26 +938,18 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -929,9 +981,6 @@ CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_BFIN_LQ035Q1 is not set
 CONFIG_FB_BF537_LQ035=m
-CONFIG_LQ035_SLAVE_ADDR=0x58
-# CONFIG_FB_BFIN_LANDSCAPE is not set
-# CONFIG_FB_BFIN_BGR is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -946,15 +995,18 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CORGI=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -963,19 +1015,27 @@ CONFIG_BACKLIGHT_CORGI=m
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -986,13 +1046,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73322=m
 CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
@@ -1003,16 +1056,20 @@ CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
 CONFIG_SND_BFIN_AD73311_SE=4
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SOC_SPORT=m
 CONFIG_SND_BF5XX_SOC_I2S=m
 CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SOC_AD1980=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=m
 CONFIG_SND_SOC_AD73311=m
@@ -1020,14 +1077,12 @@ CONFIG_SND_SOC_AD73311=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1064,6 +1119,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1075,6 +1131,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1095,10 +1152,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1107,9 +1175,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1119,6 +1191,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1137,13 +1214,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1162,17 +1235,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1191,7 +1255,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1256,14 +1319,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1271,31 +1339,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1320,6 +1396,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1328,14 +1405,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1367,11 +1444,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1408,6 +1487,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1415,11 +1495,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1429,6 +1511,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index 09ea249..bc1871d 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,22 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +31,41 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,6 +86,10 @@ CONFIG_EPOLL=y
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -69,11 +97,15 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +130,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -132,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 CONFIG_BF538=y
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=4
@@ -246,7 +274,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -298,7 +326,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -307,16 +334,18 @@ CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -327,7 +356,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -383,11 +412,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -411,7 +435,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -422,6 +445,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -435,14 +459,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -481,13 +525,8 @@ CONFIG_SIR_BFIN_DMA=y
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -508,6 +547,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -566,6 +606,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -581,11 +622,6 @@ CONFIG_MTD_NAND=m
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -593,6 +629,11 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -643,14 +684,20 @@ CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -659,15 +706,16 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -700,14 +748,17 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -715,9 +766,13 @@ CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -728,16 +783,13 @@ CONFIG_INPUT_MISC=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -751,6 +803,7 @@ CONFIG_BFIN_JTAG_COMM=m
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -765,12 +818,8 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -778,6 +827,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -810,14 +860,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -834,13 +876,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -856,6 +903,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -866,11 +914,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -892,26 +944,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -947,6 +990,7 @@ CONFIG_FB_BFIN_LQ035Q1=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -957,14 +1001,12 @@ CONFIG_FB_BFIN_LQ035Q1=m
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1001,6 +1043,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1012,6 +1055,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1032,10 +1076,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -1044,9 +1099,13 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1056,6 +1115,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1074,13 +1138,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1099,17 +1159,8 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1128,7 +1179,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1193,14 +1243,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1208,31 +1263,39 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1257,6 +1320,7 @@ CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1265,14 +1329,14 @@ CONFIG_ACCESS_CHECK=y
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1304,11 +1368,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1345,6 +1411,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1352,11 +1419,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1366,6 +1435,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index eb3e98b..ca309cf 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.5
-# Mon Nov  2 22:02:56 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,24 +88,23 @@ CONFIG_EPOLL=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 
 #
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
@@ -163,15 +161,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
 CONFIG_BF548_std=y
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
@@ -185,7 +183,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BF54x=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
 CONFIG_IRQ_SPORT0_RX=9
@@ -221,6 +218,8 @@ CONFIG_IRQ_SPI1=10
 CONFIG_IRQ_SPI2=10
 CONFIG_IRQ_TWI0=11
 CONFIG_IRQ_TWI1=11
+CONFIG_BF548=y
+CONFIG_BF54x=y
 CONFIG_BFIN548_EZKIT=y
 # CONFIG_BFIN548_BLUETECHNIX_CM is not set
 
@@ -387,12 +386,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
@@ -505,6 +506,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -528,7 +530,24 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=m
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_BFIN=m
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
 #
@@ -663,6 +682,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -711,10 +731,10 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
-# CONFIG_AD525X_DPOT is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -767,7 +787,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -808,6 +829,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 CONFIG_SMSC911X=y
 # CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -818,12 +840,10 @@ CONFIG_SMSC911X=y
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
@@ -877,10 +897,12 @@ CONFIG_INPUT_EVBUG=m
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_BFIN=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
@@ -900,6 +922,7 @@ CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -910,7 +933,6 @@ CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -976,11 +998,6 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -988,6 +1005,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -1021,9 +1039,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1078,11 +1093,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1116,8 +1135,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -1192,6 +1213,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_BLACKFIN_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1245,7 +1267,6 @@ CONFIG_SND_SOC_AD1980=y
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1268,6 +1289,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1422,10 +1444,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=y
 # CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1472,6 +1495,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1522,6 +1546,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1563,7 +1588,6 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -1595,7 +1619,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1680,6 +1703,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1714,12 +1738,14 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1730,7 +1756,6 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1766,7 +1791,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1798,11 +1822,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index b9b0f93..6a776ce 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -114,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -1486,19 +1486,10 @@ CONFIG_DEBUG_INFO=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index e3ecdcc..792ff09 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.5
-# Mon Nov  2 21:59:31 2009
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -12,7 +11,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
@@ -49,11 +47,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,17 +88,15 @@ CONFIG_EPOLL=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 
 #
@@ -163,15 +160,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_BF537 is not set
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 CONFIG_BF561=y
 # CONFIG_SMP is not set
@@ -180,9 +177,9 @@ CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
+CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_4 is not set
-CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
@@ -298,7 +295,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
-# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -353,12 +350,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
@@ -370,9 +369,11 @@ CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_DCACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
+CONFIG_BFIN_L2_DCACHEABLE=y
+# CONFIG_BFIN_L2_WRITEBACK is not set
+CONFIG_BFIN_L2_WRITETHROUGH=y
 
 #
 # Memory Protection Unit
@@ -472,6 +473,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -613,6 +615,7 @@ CONFIG_MTD_PHYSMAP=m
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -685,6 +688,7 @@ CONFIG_SMC91X=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -695,14 +699,10 @@ CONFIG_SMC91X=y
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -782,11 +782,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -838,11 +833,15 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -865,6 +864,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
@@ -884,7 +884,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -923,6 +922,7 @@ CONFIG_HID=m
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -957,7 +957,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -989,7 +988,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1064,6 +1062,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1098,26 +1097,24 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1153,7 +1150,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1185,11 +1181,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index bc7fae3..ed0a7eb 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -834,13 +834,6 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA Blackfin devices
 #
-CONFIG_SND_BLACKFIN_AD1836=m
-CONFIG_SND_BLACKFIN_AD1836_TDM=y
-# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
-CONFIG_SND_BLACKFIN_AD1836_MULSUB=y
-# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
-CONFIG_SND_BLACKFIN_SPORT=0
-CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 # CONFIG_SND_BFIN_AD73311 is not set
 
 #
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 67d1276..ad58fed 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,21 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
+# Linux kernel version: 2.6.32.2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -25,16 +31,32 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -58,6 +80,10 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -65,11 +91,14 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -77,11 +106,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -97,7 +123,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -128,15 +153,15 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BF537=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
+# CONFIG_BF542_std is not set
 # CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
+# CONFIG_BF544_std is not set
 # CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
+# CONFIG_BF547_std is not set
 # CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
+# CONFIG_BF548_std is not set
 # CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
+# CONFIG_BF549_std is not set
 # CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
@@ -180,7 +205,8 @@ CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 CONFIG_PNAV10=y
 # CONFIG_CAMSIG_MINOTAUR is not set
@@ -282,7 +308,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
@@ -291,16 +316,18 @@ CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
 
 #
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -311,7 +338,7 @@ CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -367,11 +394,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -395,7 +417,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -406,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -419,7 +441,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -430,13 +455,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -455,6 +475,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -506,6 +527,7 @@ CONFIG_MTD_UCLINUX=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -521,11 +543,6 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=y
-CONFIG_BFIN_NAND_BASE=0x20100000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=44
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -533,6 +550,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -549,10 +571,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -587,6 +619,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -597,9 +632,12 @@ CONFIG_BFIN_TX_DESC_NUM=100
 CONFIG_BFIN_RX_DESC_NUM=100
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -608,15 +646,16 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -649,14 +688,17 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -665,6 +707,7 @@ CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -673,7 +716,9 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -684,16 +729,13 @@ CONFIG_INPUT_UINPUT=y
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_BFIN_JTAG_COMM is not set
@@ -707,6 +749,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -719,24 +762,17 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-CONFIG_CAN4LINUX=y
-
-#
-# linux embedded drivers
-#
-CONFIG_CAN_BLACKFIN=m
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -769,14 +805,6 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -792,20 +820,29 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADCXX is not set
@@ -818,11 +855,13 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -838,17 +877,24 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -858,9 +904,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -875,28 +920,19 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -928,24 +964,24 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_BFIN_LQ035Q1 is not set
 CONFIG_FB_BF537_LQ035=y
-CONFIG_LQ035_SLAVE_ADDR=0x58
-CONFIG_FB_BFIN_LANDSCAPE=y
-# CONFIG_FB_BFIN_BGR is not set
 # CONFIG_FB_BFIN_7393 is not set
 # CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
 # Display device support
@@ -954,6 +990,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
@@ -963,6 +1000,11 @@ CONFIG_SND=m
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -973,7 +1015,6 @@ CONFIG_SND_SPI=y
 #
 # ALSA Blackfin devices
 #
-# CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73322 is not set
 # CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=y
@@ -993,9 +1034,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1031,6 +1076,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1042,6 +1088,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1062,10 +1109,21 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1078,9 +1136,13 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1090,6 +1152,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1108,13 +1175,9 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1123,17 +1186,8 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1152,7 +1206,6 @@ CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1217,18 +1270,19 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_VERBOSE=y
@@ -1245,6 +1299,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_EARLY_PRINTK is not set
 # CONFIG_CPLB_INFO is not set
 # CONFIG_ACCESS_CHECK is not set
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1253,14 +1308,14 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1292,11 +1347,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1333,6 +1390,7 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1340,11 +1398,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1356,3 +1416,4 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
new file mode 100644
index 0000000..4d31e2a
--- /dev/null
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -0,0 +1,1375 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.3
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+CONFIG_BF518=y
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542_std is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544_std is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547_std is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548_std is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549_std is not set
+# CONFIG_BF549M is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF51x=y
+# CONFIG_BFIN518F_EZBRD is not set
+CONFIG_BFIN518F_TCM=y
+
+#
+# BF518 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF518_SPORT0_PORTF is not set
+CONFIG_BF518_SPORT0_PORTG=y
+CONFIG_BF518_SPORT0_TSCLK_PG10=y
+# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF518_UART1_PORTF=y
+# CONFIG_BF518_UART1_PORTG is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_PTP_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI0=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI0_ERROR=7
+CONFIG_IRQ_SPI1_ERROR=7
+CONFIG_IRQ_RSI_INT0=7
+CONFIG_IRQ_RSI_INT1=7
+CONFIG_IRQ_PWM_TRIP=10
+CONFIG_IRQ_PWM_SYNC=10
+CONFIG_IRQ_PTP_STAT=10
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=m
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_512K is not set
+# CONFIG_DMA_UNCACHED_256K is not set
+# CONFIG_DMA_UNCACHED_128K is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+CONFIG_BFIN_MAC_USE_HWSTAMP=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_ADF702X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+CONFIG_SPI_BFIN_LOCK=y
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_SDH_BFIN is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
+# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
+# CONFIG_DEBUG_ICACHE_CHECK is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e6485c3..121cc04 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -39,9 +39,15 @@ extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
 struct pt_regs;
+#if defined(CONFIG_DEBUG_VERBOSE)
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
+#else
+#define dump_bfin_process(regs)
+#define dump_bfin_mem(regs)
+#define dump_bfin_trace_buffer()
+#endif
 
 /* init functions only */
 extern int init_arch_irq(void);
diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h
index 57bc21a..8368951 100644
--- a/arch/blackfin/include/asm/bfin-lq035q1.h
+++ b/arch/blackfin/include/asm/bfin-lq035q1.h
@@ -8,6 +8,9 @@
 #ifndef BFIN_LQ035Q1_H
 #define BFIN_LQ035Q1_H
 
+/*
+ * LCD Modes
+ */
 #define LQ035_RL	(0 << 8)	/* Right -> Left Scan */
 #define LQ035_LR	(1 << 8)	/* Left -> Right Scan */
 #define LQ035_TB	(1 << 9)	/* Top -> Botton Scan */
@@ -17,9 +20,18 @@
 #define LQ035_NORM	(1 << 13)	/* Reversal */
 #define LQ035_REV	(0 << 13)	/* Reversal */
 
+/*
+ * PPI Modes
+ */
+
+#define USE_RGB565_16_BIT_PPI	1
+#define USE_RGB565_8_BIT_PPI	2
+#define USE_RGB888_8_BIT_PPI	3
+
 struct bfin_lq035q1fb_disp_info {
 
 	unsigned	mode;
+	unsigned	ppi_mode;
 	/* GPIOs */
 	int		use_bl;
 	unsigned 	gpio_bl;
diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h
new file mode 100644
index 0000000..eec0076
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_can.h
@@ -0,0 +1,725 @@
+/*
+ * bfin_can.h - interface to Blackfin CANs
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_CAN_H__
+#define __ASM_BFIN_CAN_H__
+
+/*
+ * transmit and receive channels
+ */
+#define TRANSMIT_CHL            24
+#define RECEIVE_STD_CHL         0
+#define RECEIVE_EXT_CHL         4
+#define RECEIVE_RTR_CHL         8
+#define RECEIVE_EXT_RTR_CHL     12
+#define MAX_CHL_NUMBER          32
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin can registers layout
+ */
+struct bfin_can_mask_regs {
+	__BFP(aml);
+	__BFP(amh);
+};
+
+struct bfin_can_channel_regs {
+	u16 data[8];
+	__BFP(dlc);
+	__BFP(tsv);
+	__BFP(id0);
+	__BFP(id1);
+};
+
+struct bfin_can_regs {
+	/*
+	 * global control and status registers
+	 */
+	__BFP(mc1);           /* offset 0x00 */
+	__BFP(md1);           /* offset 0x04 */
+	__BFP(trs1);          /* offset 0x08 */
+	__BFP(trr1);          /* offset 0x0c */
+	__BFP(ta1);           /* offset 0x10 */
+	__BFP(aa1);           /* offset 0x14 */
+	__BFP(rmp1);          /* offset 0x18 */
+	__BFP(rml1);          /* offset 0x1c */
+	__BFP(mbtif1);        /* offset 0x20 */
+	__BFP(mbrif1);        /* offset 0x24 */
+	__BFP(mbim1);         /* offset 0x28 */
+	__BFP(rfh1);          /* offset 0x2c */
+	__BFP(opss1);         /* offset 0x30 */
+	u32 __pad1[3];
+	__BFP(mc2);           /* offset 0x40 */
+	__BFP(md2);           /* offset 0x44 */
+	__BFP(trs2);          /* offset 0x48 */
+	__BFP(trr2);          /* offset 0x4c */
+	__BFP(ta2);           /* offset 0x50 */
+	__BFP(aa2);           /* offset 0x54 */
+	__BFP(rmp2);          /* offset 0x58 */
+	__BFP(rml2);          /* offset 0x5c */
+	__BFP(mbtif2);        /* offset 0x60 */
+	__BFP(mbrif2);        /* offset 0x64 */
+	__BFP(mbim2);         /* offset 0x68 */
+	__BFP(rfh2);          /* offset 0x6c */
+	__BFP(opss2);         /* offset 0x70 */
+	u32 __pad2[3];
+	__BFP(clock);         /* offset 0x80 */
+	__BFP(timing);        /* offset 0x84 */
+	__BFP(debug);         /* offset 0x88 */
+	__BFP(status);        /* offset 0x8c */
+	__BFP(cec);           /* offset 0x90 */
+	__BFP(gis);           /* offset 0x94 */
+	__BFP(gim);           /* offset 0x98 */
+	__BFP(gif);           /* offset 0x9c */
+	__BFP(control);       /* offset 0xa0 */
+	__BFP(intr);          /* offset 0xa4 */
+	u32 __pad3[1];
+	__BFP(mbtd);          /* offset 0xac */
+	__BFP(ewr);           /* offset 0xb0 */
+	__BFP(esr);           /* offset 0xb4 */
+	u32 __pad4[2];
+	__BFP(ucreg);         /* offset 0xc0 */
+	__BFP(uccnt);         /* offset 0xc4 */
+	__BFP(ucrc);          /* offset 0xc8 */
+	__BFP(uccnf);         /* offset 0xcc */
+	u32 __pad5[12];
+
+	/*
+	 * channel(mailbox) mask and message registers
+	 */
+	struct bfin_can_mask_regs msk[MAX_CHL_NUMBER];    /* offset 0x100 */
+	struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
+};
+
+#undef __BFP
+
+/* CAN_CONTROL Masks */
+#define SRS			0x0001	/* Software Reset */
+#define DNM			0x0002	/* Device Net Mode */
+#define ABO			0x0004	/* Auto-Bus On Enable */
+#define TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*) */
+#define WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
+#define SMR			0x0020	/* Sleep Mode Request */
+#define CSR			0x0040	/* CAN Suspend Mode Request */
+#define CCR			0x0080	/* CAN Configuration Mode Request */
+
+/* CAN_STATUS Masks */
+#define WT			0x0001	/* TX Warning Flag */
+#define WR			0x0002	/* RX Warning Flag */
+#define EP			0x0004	/* Error Passive Mode */
+#define EBO			0x0008	/* Error Bus Off Mode */
+#define SMA			0x0020	/* Sleep Mode Acknowledge */
+#define CSA			0x0040	/* Suspend Mode Acknowledge */
+#define CCA			0x0080	/* Configuration Mode Acknowledge */
+#define MBPTR		0x1F00	/* Mailbox Pointer */
+#define TRM			0x4000	/* Transmit Mode */
+#define REC			0x8000	/* Receive Mode */
+
+/* CAN_CLOCK Masks */
+#define BRP			0x03FF	/* Bit-Rate Pre-Scaler */
+
+/* CAN_TIMING Masks */
+#define TSEG1		0x000F	/* Time Segment 1 */
+#define TSEG2		0x0070	/* Time Segment 2 */
+#define SAM			0x0080	/* Sampling */
+#define SJW			0x0300	/* Synchronization Jump Width */
+
+/* CAN_DEBUG Masks */
+#define DEC			0x0001	/* Disable CAN Error Counters */
+#define DRI			0x0002	/* Disable CAN RX Input */
+#define DTO			0x0004	/* Disable CAN TX Output */
+#define DIL			0x0008	/* Disable CAN Internal Loop */
+#define MAA			0x0010	/* Mode Auto-Acknowledge Enable */
+#define MRB			0x0020	/* Mode Read Back Enable */
+#define CDE			0x8000	/* CAN Debug Enable */
+
+/* CAN_CEC Masks */
+#define RXECNT		0x00FF	/* Receive Error Counter */
+#define TXECNT		0xFF00	/* Transmit Error Counter */
+
+/* CAN_INTR Masks */
+#define MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
+#define MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
+#define GIRQ		0x0004	/* Global Interrupt */
+#define SMACK		0x0008	/* Sleep Mode Acknowledge */
+#define CANTX		0x0040	/* CAN TX Bus Value */
+#define CANRX		0x0080	/* CAN RX Bus Value */
+
+/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
+#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define IDE			0x2000	/* Identifier Extension */
+#define RTR			0x4000	/* Remote Frame Transmission Request */
+#define AME			0x8000	/* Acceptance Mask Enable */
+
+/* CAN_MBxx_TIMESTAMP Masks */
+#define TSV			0xFFFF	/* Timestamp */
+
+/* CAN_MBxx_LENGTH Masks */
+#define DLC			0x000F	/* Data Length Code */
+
+/* CAN_AMxxH and CAN_AMxxL Masks */
+#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL) */
+#define EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
+#define EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
+#define BASEID		0x1FFC	/* Base Identifier */
+#define AMIDE		0x2000	/* Acceptance Mask ID Extension Enable */
+#define FMD			0x4000	/* Full Mask Data Field Enable */
+#define FDF			0x8000	/* Filter On Data Field Enable */
+
+/* CAN_MC1 Masks */
+#define MC0			0x0001	/* Enable Mailbox 0 */
+#define MC1			0x0002	/* Enable Mailbox 1 */
+#define MC2			0x0004	/* Enable Mailbox 2 */
+#define MC3			0x0008	/* Enable Mailbox 3 */
+#define MC4			0x0010	/* Enable Mailbox 4 */
+#define MC5			0x0020	/* Enable Mailbox 5 */
+#define MC6			0x0040	/* Enable Mailbox 6 */
+#define MC7			0x0080	/* Enable Mailbox 7 */
+#define MC8			0x0100	/* Enable Mailbox 8 */
+#define MC9			0x0200	/* Enable Mailbox 9 */
+#define MC10		0x0400	/* Enable Mailbox 10 */
+#define MC11		0x0800	/* Enable Mailbox 11 */
+#define MC12		0x1000	/* Enable Mailbox 12 */
+#define MC13		0x2000	/* Enable Mailbox 13 */
+#define MC14		0x4000	/* Enable Mailbox 14 */
+#define MC15		0x8000	/* Enable Mailbox 15 */
+
+/* CAN_MC2 Masks */
+#define MC16		0x0001	/* Enable Mailbox 16 */
+#define MC17		0x0002	/* Enable Mailbox 17 */
+#define MC18		0x0004	/* Enable Mailbox 18 */
+#define MC19		0x0008	/* Enable Mailbox 19 */
+#define MC20		0x0010	/* Enable Mailbox 20 */
+#define MC21		0x0020	/* Enable Mailbox 21 */
+#define MC22		0x0040	/* Enable Mailbox 22 */
+#define MC23		0x0080	/* Enable Mailbox 23 */
+#define MC24		0x0100	/* Enable Mailbox 24 */
+#define MC25		0x0200	/* Enable Mailbox 25 */
+#define MC26		0x0400	/* Enable Mailbox 26 */
+#define MC27		0x0800	/* Enable Mailbox 27 */
+#define MC28		0x1000	/* Enable Mailbox 28 */
+#define MC29		0x2000	/* Enable Mailbox 29 */
+#define MC30		0x4000	/* Enable Mailbox 30 */
+#define MC31		0x8000	/* Enable Mailbox 31 */
+
+/* CAN_MD1 Masks */
+#define MD0			0x0001	/* Enable Mailbox 0 For Receive */
+#define MD1			0x0002	/* Enable Mailbox 1 For Receive */
+#define MD2			0x0004	/* Enable Mailbox 2 For Receive */
+#define MD3			0x0008	/* Enable Mailbox 3 For Receive */
+#define MD4			0x0010	/* Enable Mailbox 4 For Receive */
+#define MD5			0x0020	/* Enable Mailbox 5 For Receive */
+#define MD6			0x0040	/* Enable Mailbox 6 For Receive */
+#define MD7			0x0080	/* Enable Mailbox 7 For Receive */
+#define MD8			0x0100	/* Enable Mailbox 8 For Receive */
+#define MD9			0x0200	/* Enable Mailbox 9 For Receive */
+#define MD10		0x0400	/* Enable Mailbox 10 For Receive */
+#define MD11		0x0800	/* Enable Mailbox 11 For Receive */
+#define MD12		0x1000	/* Enable Mailbox 12 For Receive */
+#define MD13		0x2000	/* Enable Mailbox 13 For Receive */
+#define MD14		0x4000	/* Enable Mailbox 14 For Receive */
+#define MD15		0x8000	/* Enable Mailbox 15 For Receive */
+
+/* CAN_MD2 Masks */
+#define MD16		0x0001	/* Enable Mailbox 16 For Receive */
+#define MD17		0x0002	/* Enable Mailbox 17 For Receive */
+#define MD18		0x0004	/* Enable Mailbox 18 For Receive */
+#define MD19		0x0008	/* Enable Mailbox 19 For Receive */
+#define MD20		0x0010	/* Enable Mailbox 20 For Receive */
+#define MD21		0x0020	/* Enable Mailbox 21 For Receive */
+#define MD22		0x0040	/* Enable Mailbox 22 For Receive */
+#define MD23		0x0080	/* Enable Mailbox 23 For Receive */
+#define MD24		0x0100	/* Enable Mailbox 24 For Receive */
+#define MD25		0x0200	/* Enable Mailbox 25 For Receive */
+#define MD26		0x0400	/* Enable Mailbox 26 For Receive */
+#define MD27		0x0800	/* Enable Mailbox 27 For Receive */
+#define MD28		0x1000	/* Enable Mailbox 28 For Receive */
+#define MD29		0x2000	/* Enable Mailbox 29 For Receive */
+#define MD30		0x4000	/* Enable Mailbox 30 For Receive */
+#define MD31		0x8000	/* Enable Mailbox 31 For Receive */
+
+/* CAN_RMP1 Masks */
+#define RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
+#define RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
+#define RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
+#define RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
+#define RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
+#define RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
+#define RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
+#define RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
+#define RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
+#define RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
+#define RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
+#define RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
+#define RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
+#define RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
+#define RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
+#define RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
+
+/* CAN_RMP2 Masks */
+#define RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
+#define RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
+#define RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
+#define RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
+#define RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
+#define RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
+#define RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
+#define RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
+#define RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
+#define RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
+#define RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
+#define RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
+#define RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
+#define RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
+#define RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
+#define RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
+
+/* CAN_RML1 Masks */
+#define RML0		0x0001	/* RX Message Lost In Mailbox 0 */
+#define RML1		0x0002	/* RX Message Lost In Mailbox 1 */
+#define RML2		0x0004	/* RX Message Lost In Mailbox 2 */
+#define RML3		0x0008	/* RX Message Lost In Mailbox 3 */
+#define RML4		0x0010	/* RX Message Lost In Mailbox 4 */
+#define RML5		0x0020	/* RX Message Lost In Mailbox 5 */
+#define RML6		0x0040	/* RX Message Lost In Mailbox 6 */
+#define RML7		0x0080	/* RX Message Lost In Mailbox 7 */
+#define RML8		0x0100	/* RX Message Lost In Mailbox 8 */
+#define RML9		0x0200	/* RX Message Lost In Mailbox 9 */
+#define RML10		0x0400	/* RX Message Lost In Mailbox 10 */
+#define RML11		0x0800	/* RX Message Lost In Mailbox 11 */
+#define RML12		0x1000	/* RX Message Lost In Mailbox 12 */
+#define RML13		0x2000	/* RX Message Lost In Mailbox 13 */
+#define RML14		0x4000	/* RX Message Lost In Mailbox 14 */
+#define RML15		0x8000	/* RX Message Lost In Mailbox 15 */
+
+/* CAN_RML2 Masks */
+#define RML16		0x0001	/* RX Message Lost In Mailbox 16 */
+#define RML17		0x0002	/* RX Message Lost In Mailbox 17 */
+#define RML18		0x0004	/* RX Message Lost In Mailbox 18 */
+#define RML19		0x0008	/* RX Message Lost In Mailbox 19 */
+#define RML20		0x0010	/* RX Message Lost In Mailbox 20 */
+#define RML21		0x0020	/* RX Message Lost In Mailbox 21 */
+#define RML22		0x0040	/* RX Message Lost In Mailbox 22 */
+#define RML23		0x0080	/* RX Message Lost In Mailbox 23 */
+#define RML24		0x0100	/* RX Message Lost In Mailbox 24 */
+#define RML25		0x0200	/* RX Message Lost In Mailbox 25 */
+#define RML26		0x0400	/* RX Message Lost In Mailbox 26 */
+#define RML27		0x0800	/* RX Message Lost In Mailbox 27 */
+#define RML28		0x1000	/* RX Message Lost In Mailbox 28 */
+#define RML29		0x2000	/* RX Message Lost In Mailbox 29 */
+#define RML30		0x4000	/* RX Message Lost In Mailbox 30 */
+#define RML31		0x8000	/* RX Message Lost In Mailbox 31 */
+
+/* CAN_OPSS1 Masks */
+#define OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
+#define OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
+#define OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
+#define OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
+#define OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
+#define OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
+#define OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
+#define OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
+#define OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
+#define OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
+#define OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
+#define OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
+#define OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
+#define OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
+#define OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
+#define OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
+
+/* CAN_OPSS2 Masks */
+#define OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
+#define OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
+#define OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
+#define OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
+#define OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
+#define OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
+#define OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
+#define OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
+#define OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
+#define OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
+#define OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
+#define OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
+#define OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
+#define OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
+#define OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
+#define OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
+
+/* CAN_TRR1 Masks */
+#define TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0 */
+#define TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1 */
+#define TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2 */
+#define TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3 */
+#define TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4 */
+#define TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5 */
+#define TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6 */
+#define TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7 */
+#define TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8 */
+#define TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9 */
+#define TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10 */
+#define TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11 */
+#define TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12 */
+#define TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13 */
+#define TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14 */
+#define TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15 */
+
+/* CAN_TRR2 Masks */
+#define TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16 */
+#define TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17 */
+#define TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18 */
+#define TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19 */
+#define TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20 */
+#define TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21 */
+#define TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22 */
+#define TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23 */
+#define TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24 */
+#define TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25 */
+#define TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26 */
+#define TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27 */
+#define TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28 */
+#define TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29 */
+#define TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30 */
+#define TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31 */
+
+/* CAN_TRS1 Masks */
+#define TRS0		0x0001	/* Remote Frame Request For Mailbox 0 */
+#define TRS1		0x0002	/* Remote Frame Request For Mailbox 1 */
+#define TRS2		0x0004	/* Remote Frame Request For Mailbox 2 */
+#define TRS3		0x0008	/* Remote Frame Request For Mailbox 3 */
+#define TRS4		0x0010	/* Remote Frame Request For Mailbox 4 */
+#define TRS5		0x0020	/* Remote Frame Request For Mailbox 5 */
+#define TRS6		0x0040	/* Remote Frame Request For Mailbox 6 */
+#define TRS7		0x0080	/* Remote Frame Request For Mailbox 7 */
+#define TRS8		0x0100	/* Remote Frame Request For Mailbox 8 */
+#define TRS9		0x0200	/* Remote Frame Request For Mailbox 9 */
+#define TRS10		0x0400	/* Remote Frame Request For Mailbox 10 */
+#define TRS11		0x0800	/* Remote Frame Request For Mailbox 11 */
+#define TRS12		0x1000	/* Remote Frame Request For Mailbox 12 */
+#define TRS13		0x2000	/* Remote Frame Request For Mailbox 13 */
+#define TRS14		0x4000	/* Remote Frame Request For Mailbox 14 */
+#define TRS15		0x8000	/* Remote Frame Request For Mailbox 15 */
+
+/* CAN_TRS2 Masks */
+#define TRS16		0x0001	/* Remote Frame Request For Mailbox 16 */
+#define TRS17		0x0002	/* Remote Frame Request For Mailbox 17 */
+#define TRS18		0x0004	/* Remote Frame Request For Mailbox 18 */
+#define TRS19		0x0008	/* Remote Frame Request For Mailbox 19 */
+#define TRS20		0x0010	/* Remote Frame Request For Mailbox 20 */
+#define TRS21		0x0020	/* Remote Frame Request For Mailbox 21 */
+#define TRS22		0x0040	/* Remote Frame Request For Mailbox 22 */
+#define TRS23		0x0080	/* Remote Frame Request For Mailbox 23 */
+#define TRS24		0x0100	/* Remote Frame Request For Mailbox 24 */
+#define TRS25		0x0200	/* Remote Frame Request For Mailbox 25 */
+#define TRS26		0x0400	/* Remote Frame Request For Mailbox 26 */
+#define TRS27		0x0800	/* Remote Frame Request For Mailbox 27 */
+#define TRS28		0x1000	/* Remote Frame Request For Mailbox 28 */
+#define TRS29		0x2000	/* Remote Frame Request For Mailbox 29 */
+#define TRS30		0x4000	/* Remote Frame Request For Mailbox 30 */
+#define TRS31		0x8000	/* Remote Frame Request For Mailbox 31 */
+
+/* CAN_AA1 Masks */
+#define AA0			0x0001	/* Aborted Message In Mailbox 0 */
+#define AA1			0x0002	/* Aborted Message In Mailbox 1 */
+#define AA2			0x0004	/* Aborted Message In Mailbox 2 */
+#define AA3			0x0008	/* Aborted Message In Mailbox 3 */
+#define AA4			0x0010	/* Aborted Message In Mailbox 4 */
+#define AA5			0x0020	/* Aborted Message In Mailbox 5 */
+#define AA6			0x0040	/* Aborted Message In Mailbox 6 */
+#define AA7			0x0080	/* Aborted Message In Mailbox 7 */
+#define AA8			0x0100	/* Aborted Message In Mailbox 8 */
+#define AA9			0x0200	/* Aborted Message In Mailbox 9 */
+#define AA10		0x0400	/* Aborted Message In Mailbox 10 */
+#define AA11		0x0800	/* Aborted Message In Mailbox 11 */
+#define AA12		0x1000	/* Aborted Message In Mailbox 12 */
+#define AA13		0x2000	/* Aborted Message In Mailbox 13 */
+#define AA14		0x4000	/* Aborted Message In Mailbox 14 */
+#define AA15		0x8000	/* Aborted Message In Mailbox 15 */
+
+/* CAN_AA2 Masks */
+#define AA16		0x0001	/* Aborted Message In Mailbox 16 */
+#define AA17		0x0002	/* Aborted Message In Mailbox 17 */
+#define AA18		0x0004	/* Aborted Message In Mailbox 18 */
+#define AA19		0x0008	/* Aborted Message In Mailbox 19 */
+#define AA20		0x0010	/* Aborted Message In Mailbox 20 */
+#define AA21		0x0020	/* Aborted Message In Mailbox 21 */
+#define AA22		0x0040	/* Aborted Message In Mailbox 22 */
+#define AA23		0x0080	/* Aborted Message In Mailbox 23 */
+#define AA24		0x0100	/* Aborted Message In Mailbox 24 */
+#define AA25		0x0200	/* Aborted Message In Mailbox 25 */
+#define AA26		0x0400	/* Aborted Message In Mailbox 26 */
+#define AA27		0x0800	/* Aborted Message In Mailbox 27 */
+#define AA28		0x1000	/* Aborted Message In Mailbox 28 */
+#define AA29		0x2000	/* Aborted Message In Mailbox 29 */
+#define AA30		0x4000	/* Aborted Message In Mailbox 30 */
+#define AA31		0x8000	/* Aborted Message In Mailbox 31 */
+
+/* CAN_TA1 Masks */
+#define TA0			0x0001	/* Transmit Successful From Mailbox 0 */
+#define TA1			0x0002	/* Transmit Successful From Mailbox 1 */
+#define TA2			0x0004	/* Transmit Successful From Mailbox 2 */
+#define TA3			0x0008	/* Transmit Successful From Mailbox 3 */
+#define TA4			0x0010	/* Transmit Successful From Mailbox 4 */
+#define TA5			0x0020	/* Transmit Successful From Mailbox 5 */
+#define TA6			0x0040	/* Transmit Successful From Mailbox 6 */
+#define TA7			0x0080	/* Transmit Successful From Mailbox 7 */
+#define TA8			0x0100	/* Transmit Successful From Mailbox 8 */
+#define TA9			0x0200	/* Transmit Successful From Mailbox 9 */
+#define TA10		0x0400	/* Transmit Successful From Mailbox 10 */
+#define TA11		0x0800	/* Transmit Successful From Mailbox 11 */
+#define TA12		0x1000	/* Transmit Successful From Mailbox 12 */
+#define TA13		0x2000	/* Transmit Successful From Mailbox 13 */
+#define TA14		0x4000	/* Transmit Successful From Mailbox 14 */
+#define TA15		0x8000	/* Transmit Successful From Mailbox 15 */
+
+/* CAN_TA2 Masks */
+#define TA16		0x0001	/* Transmit Successful From Mailbox 16 */
+#define TA17		0x0002	/* Transmit Successful From Mailbox 17 */
+#define TA18		0x0004	/* Transmit Successful From Mailbox 18 */
+#define TA19		0x0008	/* Transmit Successful From Mailbox 19 */
+#define TA20		0x0010	/* Transmit Successful From Mailbox 20 */
+#define TA21		0x0020	/* Transmit Successful From Mailbox 21 */
+#define TA22		0x0040	/* Transmit Successful From Mailbox 22 */
+#define TA23		0x0080	/* Transmit Successful From Mailbox 23 */
+#define TA24		0x0100	/* Transmit Successful From Mailbox 24 */
+#define TA25		0x0200	/* Transmit Successful From Mailbox 25 */
+#define TA26		0x0400	/* Transmit Successful From Mailbox 26 */
+#define TA27		0x0800	/* Transmit Successful From Mailbox 27 */
+#define TA28		0x1000	/* Transmit Successful From Mailbox 28 */
+#define TA29		0x2000	/* Transmit Successful From Mailbox 29 */
+#define TA30		0x4000	/* Transmit Successful From Mailbox 30 */
+#define TA31		0x8000	/* Transmit Successful From Mailbox 31 */
+
+/* CAN_MBTD Masks */
+#define TDPTR		0x001F	/* Mailbox To Temporarily Disable */
+#define TDA			0x0040	/* Temporary Disable Acknowledge */
+#define TDR			0x0080	/* Temporary Disable Request */
+
+/* CAN_RFH1 Masks */
+#define RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
+#define RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
+#define RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
+#define RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
+#define RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
+#define RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
+#define RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
+#define RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
+#define RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
+#define RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
+#define RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
+#define RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
+#define RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
+#define RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
+#define RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
+#define RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
+
+/* CAN_RFH2 Masks */
+#define RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
+#define RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
+#define RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
+#define RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
+#define RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
+#define RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
+#define RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
+#define RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
+#define RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
+#define RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
+#define RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
+#define RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
+#define RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
+#define RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
+#define RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
+#define RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
+
+/* CAN_MBTIF1 Masks */
+#define MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0 */
+#define MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1 */
+#define MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2 */
+#define MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3 */
+#define MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4 */
+#define MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5 */
+#define MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6 */
+#define MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7 */
+#define MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8 */
+#define MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9 */
+#define MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10 */
+#define MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11 */
+#define MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12 */
+#define MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13 */
+#define MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14 */
+#define MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBTIF2 Masks */
+#define MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16 */
+#define MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17 */
+#define MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18 */
+#define MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19 */
+#define MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20 */
+#define MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21 */
+#define MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22 */
+#define MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23 */
+#define MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24 */
+#define MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25 */
+#define MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26 */
+#define MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27 */
+#define MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28 */
+#define MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29 */
+#define MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30 */
+#define MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBRIF1 Masks */
+#define MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0 */
+#define MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1 */
+#define MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2 */
+#define MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3 */
+#define MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4 */
+#define MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5 */
+#define MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6 */
+#define MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7 */
+#define MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8 */
+#define MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9 */
+#define MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10 */
+#define MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11 */
+#define MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12 */
+#define MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13 */
+#define MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14 */
+#define MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15 */
+
+/* CAN_MBRIF2 Masks */
+#define MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16 */
+#define MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17 */
+#define MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18 */
+#define MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19 */
+#define MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20 */
+#define MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21 */
+#define MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22 */
+#define MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23 */
+#define MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24 */
+#define MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25 */
+#define MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26 */
+#define MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27 */
+#define MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28 */
+#define MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29 */
+#define MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30 */
+#define MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31 */
+
+/* CAN_MBIM1 Masks */
+#define MBIM0		0x0001	/* Enable Interrupt For Mailbox 0 */
+#define MBIM1		0x0002	/* Enable Interrupt For Mailbox 1 */
+#define MBIM2		0x0004	/* Enable Interrupt For Mailbox 2 */
+#define MBIM3		0x0008	/* Enable Interrupt For Mailbox 3 */
+#define MBIM4		0x0010	/* Enable Interrupt For Mailbox 4 */
+#define MBIM5		0x0020	/* Enable Interrupt For Mailbox 5 */
+#define MBIM6		0x0040	/* Enable Interrupt For Mailbox 6 */
+#define MBIM7		0x0080	/* Enable Interrupt For Mailbox 7 */
+#define MBIM8		0x0100	/* Enable Interrupt For Mailbox 8 */
+#define MBIM9		0x0200	/* Enable Interrupt For Mailbox 9 */
+#define MBIM10		0x0400	/* Enable Interrupt For Mailbox 10 */
+#define MBIM11		0x0800	/* Enable Interrupt For Mailbox 11 */
+#define MBIM12		0x1000	/* Enable Interrupt For Mailbox 12 */
+#define MBIM13		0x2000	/* Enable Interrupt For Mailbox 13 */
+#define MBIM14		0x4000	/* Enable Interrupt For Mailbox 14 */
+#define MBIM15		0x8000	/* Enable Interrupt For Mailbox 15 */
+
+/* CAN_MBIM2 Masks */
+#define MBIM16		0x0001	/* Enable Interrupt For Mailbox 16 */
+#define MBIM17		0x0002	/* Enable Interrupt For Mailbox 17 */
+#define MBIM18		0x0004	/* Enable Interrupt For Mailbox 18 */
+#define MBIM19		0x0008	/* Enable Interrupt For Mailbox 19 */
+#define MBIM20		0x0010	/* Enable Interrupt For Mailbox 20 */
+#define MBIM21		0x0020	/* Enable Interrupt For Mailbox 21 */
+#define MBIM22		0x0040	/* Enable Interrupt For Mailbox 22 */
+#define MBIM23		0x0080	/* Enable Interrupt For Mailbox 23 */
+#define MBIM24		0x0100	/* Enable Interrupt For Mailbox 24 */
+#define MBIM25		0x0200	/* Enable Interrupt For Mailbox 25 */
+#define MBIM26		0x0400	/* Enable Interrupt For Mailbox 26 */
+#define MBIM27		0x0800	/* Enable Interrupt For Mailbox 27 */
+#define MBIM28		0x1000	/* Enable Interrupt For Mailbox 28 */
+#define MBIM29		0x2000	/* Enable Interrupt For Mailbox 29 */
+#define MBIM30		0x4000	/* Enable Interrupt For Mailbox 30 */
+#define MBIM31		0x8000	/* Enable Interrupt For Mailbox 31 */
+
+/* CAN_GIM Masks */
+#define EWTIM		0x0001	/* Enable TX Error Count Interrupt */
+#define EWRIM		0x0002	/* Enable RX Error Count Interrupt */
+#define EPIM		0x0004	/* Enable Error-Passive Mode Interrupt */
+#define BOIM		0x0008	/* Enable Bus Off Interrupt */
+#define WUIM		0x0010	/* Enable Wake-Up Interrupt */
+#define UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
+#define AAIM		0x0040	/* Enable Abort Acknowledge Interrupt */
+#define RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
+#define UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
+#define EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
+#define ADIM		0x0400	/* Enable Access Denied Interrupt */
+
+/* CAN_GIS Masks */
+#define EWTIS		0x0001	/* TX Error Count IRQ Status */
+#define EWRIS		0x0002	/* RX Error Count IRQ Status */
+#define EPIS		0x0004	/* Error-Passive Mode IRQ Status */
+#define BOIS		0x0008	/* Bus Off IRQ Status */
+#define WUIS		0x0010	/* Wake-Up IRQ Status */
+#define UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
+#define AAIS		0x0040	/* Abort Acknowledge IRQ Status */
+#define RMLIS		0x0080	/* RX Message Lost IRQ Status */
+#define UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
+#define EXTIS		0x0200	/* External Trigger Output IRQ Status */
+#define ADIS		0x0400	/* Access Denied IRQ Status */
+
+/* CAN_GIF Masks */
+#define EWTIF		0x0001	/* TX Error Count IRQ Flag */
+#define EWRIF		0x0002	/* RX Error Count IRQ Flag */
+#define EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
+#define BOIF		0x0008	/* Bus Off IRQ Flag */
+#define WUIF		0x0010	/* Wake-Up IRQ Flag */
+#define UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
+#define AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
+#define RMLIF		0x0080	/* RX Message Lost IRQ Flag */
+#define UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
+#define EXTIF		0x0200	/* External Trigger Output IRQ Flag */
+#define ADIF		0x0400	/* Access Denied IRQ Flag */
+
+/* CAN_UCCNF Masks */
+#define UCCNF		0x000F	/* Universal Counter Mode */
+#define UC_STAMP	0x0001	/*  Timestamp Mode */
+#define UC_WDOG		0x0002	/*  Watchdog Mode */
+#define UC_AUTOTX	0x0003	/*  Auto-Transmit Mode */
+#define UC_ERROR	0x0006	/*  CAN Error Frame Count */
+#define UC_OVER		0x0007	/*  CAN Overload Frame Count */
+#define UC_LOST		0x0008	/*  Arbitration Lost During TX Count */
+#define UC_AA		0x0009	/*  TX Abort Count */
+#define UC_TA		0x000A	/*  TX Successful Count */
+#define UC_REJECT	0x000B	/*  RX Message Rejected Count */
+#define UC_RML		0x000C	/*  RX Message Lost Count */
+#define UC_RX		0x000D	/*  Total Successful RX Messages Count */
+#define UC_RMP		0x000E	/*  Successful RX W/Matching ID Count */
+#define UC_ALL		0x000F	/*  Correct Message On CAN Bus Line Count */
+#define UCRC		0x0020	/* Universal Counter Reload/Clear */
+#define UCCT		0x0040	/* Universal Counter CAN Trigger */
+#define UCE			0x0080	/* Universal Counter Enable */
+
+/* CAN_ESR Masks */
+#define ACKE		0x0004	/* Acknowledge Error */
+#define SER			0x0008	/* Stuff Error */
+#define CRCE		0x0010	/* CRC Error */
+#define SA0			0x0020	/* Stuck At Dominant Error */
+#define BEF			0x0040	/* Bit Error Flag */
+#define FER			0x0080	/* Form Error Flag */
+
+/* CAN_EWR Masks */
+#define EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS) */
+#define EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS) */
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index b558908..9626cf7 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sport.h - userspace header for bfin sport driver
+ * bfin_sport.h - interface to Blackfin SPORTs
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,16 +9,6 @@
 #ifndef __BFIN_SPORT_H__
 #define __BFIN_SPORT_H__
 
-#ifdef __KERNEL__
-#include <linux/cdev.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#endif
-
-#define SPORT_MAJOR	237
-#define SPORT_NR_DEVS	2
-
 /* Sport mode: it can be set to TDM, i2s or others */
 #define NORM_MODE	0x0
 #define TDM_MODE	0x1
@@ -35,7 +25,7 @@ struct sport_config {
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
-	int channels;		/* Must be in 8 units */
+	int channels;	/* Must be in 8 units */
 	unsigned int frame_delay:4;	/* Delay between frame sync pulse and first bit */
 
 	/* I2S mode */
@@ -69,94 +59,137 @@ struct sport_config {
 
 #ifdef __KERNEL__
 
-struct sport_register {
-	unsigned short tcr1;
-	unsigned short reserved0;
-	unsigned short tcr2;
-	unsigned short reserved1;
-	unsigned short tclkdiv;
-	unsigned short reserved2;
-	unsigned short tfsdiv;
-	unsigned short reserved3;
-	unsigned long tx;
-	unsigned long reserved_l0;
-	unsigned long rx;
-	unsigned long reserved_l1;
-	unsigned short rcr1;
-	unsigned short reserved4;
-	unsigned short rcr2;
-	unsigned short reserved5;
-	unsigned short rclkdiv;
-	unsigned short reserved6;
-	unsigned short rfsdiv;
-	unsigned short reserved7;
-	unsigned short stat;
-	unsigned short reserved8;
-	unsigned short chnl;
-	unsigned short reserved9;
-	unsigned short mcmc1;
-	unsigned short reserved10;
-	unsigned short mcmc2;
-	unsigned short reserved11;
-	unsigned long mtcs0;
-	unsigned long mtcs1;
-	unsigned long mtcs2;
-	unsigned long mtcs3;
-	unsigned long mrcs0;
-	unsigned long mrcs1;
-	unsigned long mrcs2;
-	unsigned long mrcs3;
-};
-
-struct sport_dev {
-	struct cdev cdev;	/* Char device structure */
-
-	int sport_num;
+#include <linux/types.h>
 
-	int dma_rx_chan;
-	int dma_tx_chan;
-
-	int rx_irq;
-	unsigned char *rx_buf;	/* Buffer store the received data */
-	int rx_len;		/* How many bytes will be received */
-	int rx_received;	/* How many bytes has been received */
-
-	int tx_irq;
-	const unsigned char *tx_buf;
-	int tx_len;
-	int tx_sent;
-
-	int err_irq;
-
-	struct mutex mutex;	/* mutual exclusion semaphore */
-	struct task_struct *task;
-
-	wait_queue_head_t waitq;
-	int	wait_con;
-	struct sport_register *regs;
-	struct sport_config config;
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+struct sport_register {
+	__BFP(tcr1);
+	__BFP(tcr2);
+	__BFP(tclkdiv);
+	__BFP(tfsdiv);
+	union {
+		u32 tx32;
+		u16 tx16;
+	};
+	u32 __pad_tx;
+	union {
+		u32 rx32;	/* use the anomaly wrapper below */
+		u16 rx16;
+	};
+	u32 __pad_rx;
+	__BFP(rcr1);
+	__BFP(rcr2);
+	__BFP(rclkdiv);
+	__BFP(rfsdiv);
+	__BFP(stat);
+	__BFP(chnl);
+	__BFP(mcmc1);
+	__BFP(mcmc2);
+	u32 mtcs0;
+	u32 mtcs1;
+	u32 mtcs2;
+	u32 mtcs3;
+	u32 mrcs0;
+	u32 mrcs1;
+	u32 mrcs2;
+	u32 mrcs3;
 };
+#undef __BFP
+
+#define bfin_read_sport_rx32(base) \
+({ \
+	struct sport_register *__mmrs = (void *)base; \
+	u32 __ret; \
+	unsigned long flags; \
+	if (ANOMALY_05000473) \
+		local_irq_save(flags); \
+	__ret = __mmrs->rx32; \
+	if (ANOMALY_05000473) \
+		local_irq_restore(flags); \
+	__ret; \
+})
 
 #endif
 
-#define SPORT_TCR1	0
-#define	SPORT_TCR2	1
-#define	SPORT_TCLKDIV	2
-#define	SPORT_TFSDIV	3
-#define	SPORT_RCR1	8
-#define	SPORT_RCR2	9
-#define SPORT_RCLKDIV	10
-#define	SPORT_RFSDIV	11
-#define SPORT_CHANNEL	13
-#define SPORT_MCMC1	14
-#define SPORT_MCMC2	15
-#define SPORT_MTCS0	16
-#define SPORT_MTCS1	17
-#define SPORT_MTCS2	18
-#define SPORT_MTCS3	19
-#define SPORT_MRCS0	20
-#define SPORT_MRCS1	21
-#define SPORT_MRCS2	22
-#define SPORT_MRCS3	23
+/* Workaround defBF*.h SPORT MMRs till they get cleansed */
+#undef DTYPE_NORM
+#undef SLEN
+#undef SP_WOFF
+#undef SP_WSIZE
+
+/* SPORT_TCR1 Masks */
+#define TSPEN		0x0001	/* TX enable */
+#define ITCLK		0x0002	/* Internal TX Clock Select */
+#define TDTYPE		0x000C	/* TX Data Formatting Select */
+#define DTYPE_NORM	0x0000	/* Data Format Normal */
+#define DTYPE_ULAW	0x0008	/* Compand Using u-Law */
+#define DTYPE_ALAW	0x000C	/* Compand Using A-Law */
+#define TLSBIT		0x0010	/* TX Bit Order */
+#define ITFS		0x0200	/* Internal TX Frame Sync Select */
+#define TFSR		0x0400	/* TX Frame Sync Required Select */
+#define DITFS		0x0800	/* Data Independent TX Frame Sync Select */
+#define LTFS		0x1000	/* Low TX Frame Sync Select */
+#define LATFS		0x2000	/* Late TX Frame Sync Select */
+#define TCKFE		0x4000	/* TX Clock Falling Edge Select */
+
+/* SPORT_TCR2 Masks */
+#define SLEN		0x001F	/* SPORT TX Word Length (2 - 31) */
+#define DP_SLEN(x)	BFIN_DEPOSIT(SLEN, x)
+#define EX_SLEN(x)	BFIN_EXTRACT(SLEN, x)
+#define TXSE		0x0100	/* TX Secondary Enable */
+#define TSFSE		0x0200	/* TX Stereo Frame Sync Enable */
+#define TRFST		0x0400	/* TX Right-First Data Order */
+
+/* SPORT_RCR1 Masks */
+#define RSPEN		0x0001	/* RX enable */
+#define IRCLK		0x0002	/* Internal RX Clock Select */
+#define RDTYPE		0x000C	/* RX Data Formatting Select */
+/* DTYPE_* defined above */
+#define RLSBIT		0x0010	/* RX Bit Order */
+#define IRFS		0x0200	/* Internal RX Frame Sync Select */
+#define RFSR		0x0400	/* RX Frame Sync Required Select */
+#define LRFS		0x1000	/* Low RX Frame Sync Select */
+#define LARFS		0x2000	/* Late RX Frame Sync Select */
+#define RCKFE		0x4000	/* RX Clock Falling Edge Select */
+
+/* SPORT_RCR2 Masks */
+/* SLEN defined above */
+#define RXSE		0x0100	/* RX Secondary Enable */
+#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable */
+#define RRFST		0x0400	/* Right-First Data Order */
+
+/* SPORT_STAT Masks */
+#define RXNE		0x0001	/* RX FIFO Not Empty Status */
+#define RUVF		0x0002	/* RX Underflow Status */
+#define ROVF		0x0004	/* RX Overflow Status */
+#define TXF		0x0008	/* TX FIFO Full Status */
+#define TUVF		0x0010	/* TX Underflow Status */
+#define TOVF		0x0020	/* TX Overflow Status */
+#define TXHRE		0x0040	/* TX Hold Register Empty */
+
+/* SPORT_MCMC1 Masks */
+#define SP_WOFF		0x03FF	/* Multichannel Window Offset Field */
+#define DP_SP_WOFF(x)	BFIN_DEPOSIT(SP_WOFF, x)
+#define EX_SP_WOFF(x)	BFIN_EXTRACT(SP_WOFF, x)
+#define SP_WSIZE	0xF000	/* Multichannel Window Size Field */
+#define DP_SP_WSIZE(x)	BFIN_DEPOSIT(SP_WSIZE, x)
+#define EX_SP_WSIZE(x)	BFIN_EXTRACT(SP_WSIZE, x)
+
+/* SPORT_MCMC2 Masks */
+#define MCCRM		0x0003	/* Multichannel Clock Recovery Mode */
+#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing */
+#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing */
+#define MCMEN		0x0010	/* Multichannel Frame Mode Enable */
+#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
+#define MFD		0xF000	/* Multichannel Frame Delay */
+#define DP_MFD(x)	BFIN_DEPOSIT(MFD, x)
+#define EX_MFD(x)	BFIN_EXTRACT(MFD, x)
 
 #endif
diff --git a/arch/blackfin/include/asm/bfin_watchdog.h b/arch/blackfin/include/asm/bfin_watchdog.h
new file mode 100644
index 0000000..dce0982
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_watchdog.h
@@ -0,0 +1,30 @@
+/*
+ * bfin_watchdog.h - Blackfin watchdog definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BFIN_WATCHDOG_H
+#define _BFIN_WATCHDOG_H
+
+/* Bit in SWRST that indicates boot caused by watchdog */
+#define SWRST_RESET_WDOG 0x4000
+
+/* Bit in WDOG_CTL that indicates watchdog has expired (WDR0) */
+#define WDOG_EXPIRED 0x8000
+
+/* Masks for WDEV field in WDOG_CTL register */
+#define ICTL_RESET   0x0
+#define ICTL_NMI     0x2
+#define ICTL_GPI     0x4
+#define ICTL_NONE    0x6
+#define ICTL_MASK    0x6
+
+/* Masks for WDEN field in WDOG_CTL register */
+#define WDEN_MASK    0x0FF0
+#define WDEN_ENABLE  0x0000
+#define WDEN_DISABLE 0x0AD0
+
+#endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index a2ff3fb..605ba8e 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -7,22 +7,41 @@
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 
-#ifndef CONFIG_SMP
-# include <asm-generic/bitops.h>
-#else
+#include <linux/compiler.h>
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
 
 #ifndef _LINUX_BITOPS_H
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#include <linux/compiler.h>
-#include <asm/byteorder.h>	/* swab32 */
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#ifndef CONFIG_SMP
+#include <linux/irqflags.h>
+
+/*
+ * clear_bit may not imply a memory barrier
+ */
+#ifndef smp_mb__before_clear_bit
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+#endif
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+#else
 
+#include <asm/byteorder.h>	/* swab32 */
 #include <linux/linkage.h>
 
 asmlinkage int __raw_bit_set_asm(volatile unsigned long *addr, int nr);
@@ -89,19 +108,36 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 
 #include <asm-generic/bitops/non-atomic.h>
 
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
+#endif /* CONFIG_SMP */
 
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/ext2-non-atomic.h>
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
 
-#include <asm-generic/bitops/minix.h>
+static inline unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
 
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
+	__asm__ ("%0.l = ONES %0;"
+		"%0 = %0.l (Z);"
+		: "=d" (res) : "d" (w));
+	return res;
+}
 
-#endif /* CONFIG_SMP */
+static inline unsigned int hweight64(__u64 w)
+{
+	return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	return hweight32(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	return hweight32(w & 0xff);
+}
 
 #endif				/* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 75f6dc3..8d9b1eb 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -9,7 +9,12 @@
 
 #ifdef CONFIG_BUG
 
-#define BFIN_BUG_OPCODE	0xefcd
+/*
+ * This can be any undefined 16-bit opcode, meaning
+ * ((opcode & 0xc000) != 0xc000)
+ * Anything from 0x0001 to 0x000A (inclusive) will work
+ */
+#define BFIN_BUG_OPCODE	0x0001
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 8542bc3..93f6c63 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -15,6 +15,8 @@
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #ifdef CONFIG_SMP
 #define __cacheline_aligned
 #else
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 5dffaf5..1f90603 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -73,6 +73,11 @@
 #else
 	cli r0;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+#endif
 	[--sp] = RETI;  /*orig_pc*/
 	/* Clear all L registers.  */
 	r0 = 0 (x);
@@ -279,6 +284,13 @@
 	RETN = [sp++];
 	RETX = [sp++];
 	RETI = [sp++];
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
+
 	RETS = [sp++];
 
 #ifdef CONFIG_SMP
@@ -374,3 +386,13 @@
 
 	(R7:0, P5:0) = [SP++];
 .endm
+
+.macro pseudo_long_call func:req, scratch:req
+#ifdef CONFIG_ROMKERNEL
+	\scratch\().l = \func;
+	\scratch\().h = \func;
+	call (\scratch);
+#else
+	call \func;
+#endif
+.endm
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index b191dc6..16883e5 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -17,8 +17,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long dcache_invld_count;
-	unsigned long icache_invld_count;
 };
 
 DECLARE_PER_CPU(struct blackfin_cpudata, cpu_data);
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index 2590646..f342ff0 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -12,6 +12,8 @@
 #include <mach/anomaly.h>
 
 #define MK_BMSK_(x) (1<<x)
+#define BFIN_DEPOSIT(mask, x)	(((x) << __ffs(mask)) & (mask))
+#define BFIN_EXTRACT(mask, x)	(((x) & (mask)) >> __ffs(mask))
 
 #ifndef __ASSEMBLY__
 
@@ -23,62 +25,30 @@
 # define NOP_PAD_ANOMALY_05000198
 #endif
 
-#define bfin_read8(addr) ({ \
-	uint32_t __v; \
+#define _bfin_readX(addr, size, asm_size, asm_ext) ({ \
+	u32 __v; \
 	__asm__ __volatile__( \
 		NOP_PAD_ANOMALY_05000198 \
-		"%0 = b[%1] (z);" \
+		"%0 = " #asm_size "[%1]" #asm_ext ";" \
 		: "=d" (__v) \
 		: "a" (addr) \
 	); \
 	__v; })
-
-#define bfin_read16(addr) ({ \
-	uint32_t __v; \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"%0 = w[%1] (z);" \
-		: "=d" (__v) \
-		: "a" (addr) \
-	); \
-	__v; })
-
-#define bfin_read32(addr) ({ \
-	uint32_t __v; \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"%0 = [%1];" \
-		: "=d" (__v) \
-		: "a" (addr) \
-	); \
-	__v; })
-
-#define bfin_write8(addr, val) \
+#define _bfin_writeX(addr, val, size, asm_size) \
 	__asm__ __volatile__( \
 		NOP_PAD_ANOMALY_05000198 \
-		"b[%0] = %1;" \
+		#asm_size "[%0] = %1;" \
 		: \
-		: "a" (addr), "d" ((uint8_t)(val)) \
+		: "a" (addr), "d" ((u##size)(val)) \
 		: "memory" \
 	)
 
-#define bfin_write16(addr, val) \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"w[%0] = %1;" \
-		: \
-		: "a" (addr), "d" ((uint16_t)(val)) \
-		: "memory" \
-	)
-
-#define bfin_write32(addr, val) \
-	__asm__ __volatile__( \
-		NOP_PAD_ANOMALY_05000198 \
-		"[%0] = %1;" \
-		: \
-		: "a" (addr), "d" (val) \
-		: "memory" \
-	)
+#define bfin_read8(addr)  _bfin_readX(addr,  8, b, (z))
+#define bfin_read16(addr) _bfin_readX(addr, 16, w, (z))
+#define bfin_read32(addr) _bfin_readX(addr, 32,  ,    )
+#define bfin_write8(addr, val)  _bfin_writeX(addr, val,  8, b)
+#define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
+#define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
index c31f91c..171d8de 100644
--- a/arch/blackfin/include/asm/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -30,10 +30,22 @@ __asm__ __volatile__ (
 
 #define	HZSCALE		(268435456 / (1000000/HZ))
 
-static inline void udelay(unsigned long usecs)
+static inline unsigned long __to_delay(unsigned long scale)
 {
 	extern unsigned long loops_per_jiffy;
-	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+	return (((scale * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6;
+}
+
+static inline void udelay(unsigned long usecs)
+{
+	__delay(__to_delay(usecs));
 }
 
+static inline void ndelay(unsigned long nsecs)
+{
+	__delay(__to_delay(1) * nsecs / 1000);
+}
+
+#define ndelay ndelay
+
 #endif
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index f9172ff..212cb80f 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -44,13 +44,8 @@ dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 extern void
 __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
 static inline void
-_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+__dma_sync_inline(dma_addr_t addr, size_t size, enum dma_data_direction dir)
 {
-	if (!__builtin_constant_p(dir)) {
-		__dma_sync(addr, size, dir);
-		return;
-	}
-
 	switch (dir) {
 	case DMA_NONE:
 		BUG();
@@ -64,14 +59,15 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
 		break;
 	}
 }
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	if (__builtin_constant_p(dir))
+		__dma_sync_inline(addr, size, dir);
+	else
+		__dma_sync(addr, size, dir);
+}
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline dma_addr_t
 dma_map_single(struct device *dev, void *ptr, size_t size,
 	       enum dma_data_direction dir)
@@ -88,14 +84,6 @@ dma_map_page(struct device *dev, struct page *page,
 	return dma_map_single(dev, page_address(page) + offset, size, dir);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline void
 dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		 enum dma_data_direction dir)
@@ -110,30 +98,9 @@ dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 	dma_unmap_single(dev, dma_addr, size, dir);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction dir);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline void
 dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	     int nhwentries, enum dma_data_direction dir)
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index bd2e622..2c09b1d 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -262,6 +262,10 @@ static inline void dma_disable_irq(unsigned int channel)
 {
 	disable_irq(dma_ch[channel].irq);
 }
+static inline void dma_disable_irq_nosync(unsigned int channel)
+{
+	disable_irq_nosync(dma_ch[channel].irq);
+}
 static inline void dma_enable_irq(unsigned int channel)
 {
 	enable_irq(dma_ch[channel].irq);
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 1597ae5..efcc3ae 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -75,7 +75,7 @@
 
 #define VLEV			0x00F0	/* Internal Voltage Level */
 #ifdef __ADSPBF52x__
-#define VLEV_085 		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
 #define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
 #define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
 #define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
@@ -84,7 +84,7 @@
 #define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
 #define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
 #else
-#define VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_085		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
 #define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
 #define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
 #define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 5b50f0e..117713a 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -22,12 +22,15 @@
 #define EF_BFIN_CODE_IN_L2	0x00000040	/* --code-in-l2 */
 #define EF_BFIN_DATA_IN_L2	0x00000080	/* --data-in-l2 */
 
+#if 1	/* core dumps not supported, but linux/elfcore.h needs these */
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct { } elf_fpregset_t;
+#endif
+
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
@@ -55,6 +58,9 @@ do {											\
 	_regs->p2	= _dynamic_addr;				\
 } while(0)
 
+#if 0
+#define CORE_DUMP_USE_REGSET
+#endif
 #define ELF_FDPIC_CORE_EFLAGS	EF_BFIN_FDPIC
 #define ELF_EXEC_PAGESIZE	4096
 
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 90c9b40..4cfe2d9 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -10,4 +10,57 @@
 
 #define MCOUNT_INSN_SIZE	6 /* sizeof "[++sp] = rets; call __mcount;" */
 
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_FRAME_POINTER
+#include <linux/mm.h>
+
+extern inline void *return_address(unsigned int level)
+{
+	unsigned long *endstack, *fp, *ret_addr;
+	unsigned int current_level = 0;
+
+	if (level == 0)
+		return __builtin_return_address(0);
+
+	fp = (unsigned long *)__builtin_frame_address(0);
+	endstack = (unsigned long *)PAGE_ALIGN((unsigned long)&level);
+
+	while (((unsigned long)fp & 0x3) == 0 && fp &&
+	       (fp + 1) < endstack && current_level < level) {
+		fp = (unsigned long *)*fp;
+		current_level++;
+	}
+
+	if (((unsigned long)fp & 0x3) == 0 && fp &&
+	    (fp + 1) < endstack)
+		ret_addr = (unsigned long *)*(fp + 1);
+	else
+		ret_addr = NULL;
+
+	return ret_addr;
+}
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#define HAVE_ARCH_CALLER_ADDR
+
+/* inline function or macro may lead to unexpected result */
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* __ASSEMBLY__ */
+
 #endif
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 539468a..01b19d0 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -70,6 +70,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/compiler.h>
+
 /***********************************************************
 *
 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -165,23 +167,23 @@ int bfin_special_gpio_request(unsigned gpio, const char *label);
 #endif
 
 #ifdef CONFIG_PM
+int bfin_pm_standby_ctrl(unsigned ctrl);
 
-unsigned int bfin_pm_standby_setup(void);
-void bfin_pm_standby_restore(void);
+static inline int bfin_pm_standby_setup(void)
+{
+	return bfin_pm_standby_ctrl(1);
+}
+
+static inline void bfin_pm_standby_restore(void)
+{
+	bfin_pm_standby_ctrl(0);
+}
 
 void bfin_gpio_pm_hibernate_restore(void);
 void bfin_gpio_pm_hibernate_suspend(void);
 
 #ifndef CONFIG_BF54x
-#define PM_WAKE_RISING	0x1
-#define PM_WAKE_FALLING	0x2
-#define PM_WAKE_HIGH	0x4
-#define PM_WAKE_LOW	0x8
-#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
-#define PM_WAKE_IGNORE	0xF0
-
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
-void gpio_pm_wakeup_free(unsigned gpio);
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
 
 struct gpio_port_s {
 	unsigned short data;
@@ -223,6 +225,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value);
 int bfin_gpio_get_value(unsigned gpio);
 void bfin_gpio_set_value(unsigned gpio, int value);
 
+#include <asm/irq.h>
+#include <asm/errno.h>
+
 #ifdef CONFIG_GPIOLIB
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
@@ -247,6 +252,11 @@ static inline int gpio_cansleep(unsigned int gpio)
 	return __gpio_cansleep(gpio);
 }
 
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
 #else /* !CONFIG_GPIOLIB */
 
 static inline int gpio_request(unsigned gpio, const char *label)
@@ -279,10 +289,6 @@ static inline void gpio_set_value(unsigned gpio, int value)
 	return bfin_gpio_set_value(gpio, value);
 }
 
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-#endif	/* !CONFIG_GPIOLIB */
-#include <asm/irq.h>
-
 static inline int gpio_to_irq(unsigned gpio)
 {
 	if (likely(gpio < MAX_BLACKFIN_GPIOS))
@@ -291,6 +297,9 @@ static inline int gpio_to_irq(unsigned gpio)
 	return -EINVAL;
 }
 
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+#endif	/* !CONFIG_GPIOLIB */
+
 static inline int irq_to_gpio(unsigned irq)
 {
 	return (irq - GPIO_IRQ_BASE);
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index e7c0623..12f4060 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -12,6 +12,9 @@
 
 #include <linux/irqflags.h>
 
+/* IRQs that may be used by external irq_chip controllers */
+#define NR_SPARE_IRQS	32
+
 #include <mach/anomaly.h>
 
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
@@ -35,4 +38,8 @@
 
 #include <asm-generic/irq.h>
 
+#ifdef CONFIG_NMI_WATCHDOG
+# define ARCH_HAS_NMI_WATCHDOG
+#endif
+
 #endif				/* _BFIN_IRQ_H_ */
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index ae8ef4f..e1a9b46 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -7,12 +7,13 @@
 #ifndef __BLACKFIN_MMU_CONTEXT_H__
 #define __BLACKFIN_MMU_CONTEXT_H__
 
-#include <linux/gfp.h>
+#include <linux/slab.h>
 #include <linux/sched.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/cplbinit.h>
+#include <asm/sections.h>
 
 /* Note: L1 stacks are CPU-private things, so we bluntly disable this
    feature in SMP mode, and use the per-CPU scratch SRAM bank only to
@@ -117,9 +118,16 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 				unsigned long flags)
 {
 	unsigned long *mask = mm->context.page_rwx_mask;
-	unsigned long page = addr >> 12;
-	unsigned long idx = page >> 5;
-	unsigned long bit = 1 << (page & 31);
+	unsigned long page;
+	unsigned long idx;
+	unsigned long bit;
+
+	if (unlikely(addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE))
+		page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> 12;
+	else
+		page = addr >> 12;
+	idx = page >> 5;
+	bit = 1 << (page & 31);
 
 	if (flags & VM_READ)
 		mask[idx] |= bit;
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3ae8b56..3a1e79d 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -1,5 +1,5 @@
 /*
- * BF5XX - NAND flash controller platfrom_device info
+ * BF5XX - NAND flash controller platform_device info
  *
  * Copyright 2007-2008 Analog Devices, Inc.
  *
@@ -8,7 +8,7 @@
 
 /* struct bf5xx_nand_platform
  *
- * define a interface between platfrom board specific code and
+ * define a interface between platform board specific code and
  * bf54x NFC driver.
  *
  * nr_partitions = number of partitions pointed to be partitoons (or zero)
diff --git a/arch/blackfin/include/asm/nmi.h b/arch/blackfin/include/asm/nmi.h
new file mode 100644
index 0000000..b9caac4
--- /dev/null
+++ b/arch/blackfin/include/asm/nmi.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2
+ */
+
+#ifndef _BFIN_NMI_H_
+#define _BFIN_NMI_H_
+
+#include <linux/nmi.h>
+
+#endif
diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h
index 1d04e40..d0ce975 100644
--- a/arch/blackfin/include/asm/page.h
+++ b/arch/blackfin/include/asm/page.h
@@ -15,4 +15,7 @@
 	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
 		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
 #endif
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index 821c699..dcca3e6 100644
--- a/arch/blackfin/include/asm/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -80,7 +80,8 @@ PTE_BIT_FUNC(mkyoung, |= _PAGE_ACCESSED);
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+extern char empty_zero_page[];
 
 extern unsigned int kobjsize(const void *objp);
 
diff --git a/arch/blackfin/include/asm/pseudo_instructions.h b/arch/blackfin/include/asm/pseudo_instructions.h
new file mode 100644
index 0000000..b00adfa
--- /dev/null
+++ b/arch/blackfin/include/asm/pseudo_instructions.h
@@ -0,0 +1,18 @@
+/*
+ * header file for pseudo instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PSEUDO_
+#define _BLACKFIN_PSEUDO_
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+extern bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode);
+extern bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode);
+
+#endif
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index b33a448..aaa1c6c 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -24,6 +24,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct task_struct;
+
 /* this struct defines the way the registers are stored on the
    stack during a system call. */
 
@@ -101,9 +103,30 @@ struct pt_regs {
    master interrupt enable.  */
 #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
 #define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs)  ((regs)->usp)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *child);
+extern void user_disable_single_step(struct task_struct *child);
+/* common code demands this function */
+#define ptrace_disable(child) user_disable_single_step(child)
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+#define task_pt_regs(task) \
+	(struct pt_regs *) \
+	    ((unsigned long)task_stack_page(task) + \
+	     (THREAD_SIZE - sizeof(struct pt_regs)))
+
 #endif  /*  __KERNEL__  */
 
 #endif				/* __ASSEMBLY__ */
@@ -173,4 +196,6 @@ extern void show_regs(struct pt_regs *);
 #define PT_FDPIC_EXEC 232
 #define PT_FDPIC_INTERP 236
 
+#define PT_LAST_PSEUDO PT_FDPIC_INTERP
+
 #endif				/* _BFIN_PTRACE_H */
diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 04f4487..64d41d3 100644
--- a/arch/blackfin/include/asm/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
@@ -1,27 +1,7 @@
 #ifndef _BLACKFIN_SCATTERLIST_H
 #define _BLACKFIN_SCATTERLIST_H
 
-#include <linux/mm.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	dma_addr_t dma_address;
-	unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD	(0xffffffff)
 
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 42f6c53..14a3e66 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -21,6 +21,9 @@ extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
 extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
 	_data_l1_lma[], __weak _data_l1_len[];
+#ifdef CONFIG_ROMKERNEL
+extern char _data_lma[], _data_len[], _sinitdata[], _einitdata[], _init_data_lma[], _init_data_len[];
+#endif
 extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
 	_data_b_l1_lma[], __weak _data_b_l1_len[];
 extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h
index 6a0fe94..f5b5379 100644
--- a/arch/blackfin/include/asm/smp.h
+++ b/arch/blackfin/include/asm/smp.h
@@ -22,8 +22,23 @@ extern char coreb_trampoline_start, coreb_trampoline_end;
 struct corelock_slot {
 	int lock;
 };
+extern struct corelock_slot corelock;
+
+#ifdef __ARCH_SYNC_CORE_ICACHE
+extern unsigned long icache_invld_count[NR_CPUS];
+#endif
+#ifdef __ARCH_SYNC_CORE_DCACHE
+extern unsigned long dcache_invld_count[NR_CPUS];
+#endif
 
 void smp_icache_flush_range_others(unsigned long start,
 				   unsigned long end);
+#ifdef CONFIG_HOTPLUG_CPU
+void coreb_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
+void cpu_die(void);
+void platform_cpu_die(void);
+int __cpu_disable(void);
+int __cpu_die(unsigned int cpu);
+#endif
 
 #endif /* !__ASM_BLACKFIN_SMP_H */
diff --git a/arch/blackfin/include/asm/string.h b/arch/blackfin/include/asm/string.h
index d7f0ccb..423c099 100644
--- a/arch/blackfin/include/asm/string.h
+++ b/arch/blackfin/include/asm/string.h
@@ -12,121 +12,16 @@
 #ifdef __KERNEL__		/* only set these up for kernel code */
 
 #define __HAVE_ARCH_STRCPY
-extern inline char *strcpy(char *dest, const char *src)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B [%1++] (Z);"
-		"B [%0++] = %2;"
-		"CC = %2;"
-		"if cc jump 1b (bp);"
-		: "+&a" (dest), "+&a" (src), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strcpy(char *dest, const char *src);
 
 #define __HAVE_ARCH_STRNCPY
-extern inline char *strncpy(char *dest, const char *src, size_t n)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	if (n == 0)
-		return xdest;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B [%1++] (Z);"
-		"B [%0++] = %3;"
-		"CC = %3;"
-		"if ! cc jump 2f;"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if ! cc jump 1b (bp);"
-		"jump 4f;"
-		"2:"
-		/* if src is shorter than n, we need to null pad bytes now */
-		"%3 = 0;"
-		"3:"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if cc jump 4f;"
-		"B [%0++] = %3;"
-		"jump 3b;"
-		"4:"
-		: "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strncpy(char *dest, const char *src, size_t n);
 
 #define __HAVE_ARCH_STRCMP
-extern inline int strcmp(const char *cs, const char *ct)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B[%0++] (Z);"      /* get *cs */
-		"%3 = B[%1++] (Z);"      /* get *ct */
-		"CC = %2 == %3;"         /* compare a byte */
-		"if ! cc jump 2f;"       /* not equal, break out */
-		"CC = %2;"               /* at end of cs? */
-		"if cc jump 1b (bp);"    /* no, keep going */
-		"jump.s 3f;"             /* strings are equal */
-		"2:"
-		"%2 = %2 - %3;"          /* *cs - *ct */
-		"3:"
-		: "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strcmp(const char *cs, const char *ct);
 
 #define __HAVE_ARCH_STRNCMP
-extern inline int strncmp(const char *cs, const char *ct, size_t count)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	if (!count)
-		return 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B[%0++] (Z);"      /* get *cs */
-		"%4 = B[%1++] (Z);"      /* get *ct */
-		"CC = %3 == %4;"         /* compare a byte */
-		"if ! cc jump 3f;"       /* not equal, break out */
-		"CC = %3;"               /* at end of cs? */
-		"if ! cc jump 4f;"       /* yes, all done */
-		"%2 += -1;"              /* no, adjust count */
-		"CC = %2 == 0;"
-		"if ! cc jump 1b;"       /* more to do, keep going */
-		"2:"
-		"%3 = 0;"                /* strings are equal */
-		"jump.s 4f;"
-		"3:"
-		"%3 = %3 - %4;"          /* *cs - *ct */
-		"4:"
-		: "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strncmp(const char *cs, const char *ct, size_t count);
 
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *s, int c, size_t count);
diff --git a/arch/blackfin/include/asm/syscall.h b/arch/blackfin/include/asm/syscall.h
new file mode 100644
index 0000000..4921a48
--- /dev/null
+++ b/arch/blackfin/include/asm/syscall.h
@@ -0,0 +1,96 @@
+/*
+ * Magic syscall break down functions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BLACKFIN_SYSCALL_H__
+#define __ASM_BLACKFIN_SYSCALL_H__
+
+/*
+ * Blackfin syscalls are simple:
+ *	enter:
+ *		p0: syscall number
+ *		r{0,1,2,3,4,5}: syscall args 0,1,2,3,4,5
+ *	exit:
+ *		r0: return/error value
+ */
+
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->p0;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->p0 = regs->orig_p0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+                         int error, long val)
+{
+	regs->r0 = error ? -error : val;
+}
+
+/**
+ *	syscall_get_arguments()
+ *	@task:   unused
+ *	@regs:   the register layout to extract syscall arguments from
+ *	@i:      first syscall argument to extract
+ *	@n:      number of syscall arguments to extract
+ *	@args:   array to return the syscall arguments in
+ *
+ * args[0] gets i'th argument, args[n - 1] gets the i+n-1'th argument
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, unsigned long *args)
+{
+	/*
+	 * Assume the ptrace layout doesn't change -- r5 is first in memory,
+	 * then r4, ..., then r0.  So we simply reverse the ptrace register
+	 * array in memory to store into the args array.
+	 */
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*args++ = *aregs--;
+}
+
+/* See syscall_get_arguments() comments */
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+                      unsigned int i, unsigned int n, const unsigned long *args)
+{
+	long *aregs = &regs->r0 - i;
+
+	BUG_ON(i > 5 || i + n > 6);
+
+	while (n--)
+		*aregs-- = *args++;
+}
+
+#endif
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index a40d936..02560fd 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -17,7 +17,7 @@
 /* Thread Align Mask to reach to the top of the stack
  * for any process
  */
-#define ALIGN_PAGE_MASK         0xffffe000
+#define ALIGN_PAGE_MASK		0xffffe000
 
 /*
  * Size of kernel stack for each process. This must be a power of 2...
@@ -57,7 +57,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = INIT_PREEMPT_COUNT,   \
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
@@ -73,8 +73,7 @@ __attribute_const__
 static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-      __asm__("%0 = sp;" : "=da"(ti) :
-	);
+	__asm__("%0 = sp;" : "=da"(ti));
 	return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
 }
 
@@ -99,21 +98,23 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE              4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_FREEZE              6       /* is freezing for suspend */
-#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
-#define TIF_NOTIFY_RESUME       8       /* callback before returning to user */
+#define TIF_FREEZE		6	/* is freezing for suspend */
+#define TIF_IRQ_SYNC		7	/* sync pipeline stage */
+#define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
+#define TIF_SINGLESTEP		9
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
-#define _TIF_FREEZE             (1<<TIF_FREEZE)
-#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC		(1<<TIF_IRQ_SYNC)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h
index 589e937..9ca7db8 100644
--- a/arch/blackfin/include/asm/time.h
+++ b/arch/blackfin/include/asm/time.h
@@ -23,9 +23,7 @@
  */
 
 #ifndef CONFIG_CPU_FREQ
-#define TIME_SCALE 1
-#define __bfin_cycles_off (0)
-#define __bfin_cycles_mod (0)
+# define TIME_SCALE 1
 #else
 /*
  * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -33,9 +31,16 @@
  * adjust the Core Timer Presale Register. This way we don't lose time.
  */
 #define TIME_SCALE 4
+
+# ifdef CONFIG_CYCLES_CLOCKSOURCE
 extern unsigned long long __bfin_cycles_off;
 extern unsigned int __bfin_cycles_mod;
+# endif
+#endif
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+extern void bfin_coretmr_init(void);
+extern void bfin_coretmr_clockevent_init(void);
 #endif
 
-extern void __init setup_core_timer(void);
 #endif
diff --git a/arch/blackfin/include/asm/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
index f1a06c0..7c36868 100644
--- a/arch/blackfin/include/asm/tlbflush.h
+++ b/arch/blackfin/include/asm/tlbflush.h
@@ -1 +1,2 @@
 #include <asm-generic/tlbflush.h>
+#define flush_tlb_kernel_range(s, e) do { } while (0)
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index dc0aa55..33589a2 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -23,6 +23,13 @@
 #ifndef __ASSEMBLY__
 extern unsigned long trace_buff_offset;
 extern unsigned long software_trace_buff[];
+#if defined(CONFIG_DEBUG_VERBOSE)
+extern void decode_address(char *buf, unsigned long address);
+extern bool get_instruction(unsigned int *val, unsigned short *address);
+#else
+static inline void decode_address(char *buf, unsigned long address) { }
+static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
+#endif
 
 /* Trace Macros for C files */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index a8ddbc8..30d0d1f 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -7,7 +7,8 @@ extra-y := init_task.o vmlinux.lds
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o
+	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
+	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
     obj-y += time-ts.o
@@ -25,9 +26,12 @@ obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
+obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
 obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
+obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
+obj-$(CONFIG_BFIN_PSEUDODBG_INSNS)   += pseudodbg.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 924c002..26403d1 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -91,7 +91,7 @@ late_initcall(proc_dma_init);
  */
 int request_dma(unsigned int channel, const char *device_id)
 {
-	pr_debug("request_dma() : BEGIN \n");
+	pr_debug("request_dma() : BEGIN\n");
 
 	if (device_id == NULL)
 		printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel);
@@ -107,7 +107,7 @@ int request_dma(unsigned int channel, const char *device_id)
 #endif
 
 	if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
-		pr_debug("DMA CHANNEL IN USE  \n");
+		pr_debug("DMA CHANNEL IN USE\n");
 		return -EBUSY;
 	}
 
@@ -131,7 +131,7 @@ int request_dma(unsigned int channel, const char *device_id)
 	 * you have to request DMA, before doing any operations on
 	 * descriptor/channel
 	 */
-	pr_debug("request_dma() : END  \n");
+	pr_debug("request_dma() : END\n");
 	return 0;
 }
 EXPORT_SYMBOL(request_dma);
@@ -171,7 +171,7 @@ static void clear_dma_buffer(unsigned int channel)
 
 void free_dma(unsigned int channel)
 {
-	pr_debug("freedma() : BEGIN \n");
+	pr_debug("freedma() : BEGIN\n");
 	BUG_ON(channel >= MAX_DMA_CHANNELS ||
 			!atomic_read(&dma_ch[channel].chan_status));
 
@@ -185,7 +185,7 @@ void free_dma(unsigned int channel)
 	/* Clear the DMA Variable in the Channel */
 	atomic_set(&dma_ch[channel].chan_status, 0);
 
-	pr_debug("freedma() : END \n");
+	pr_debug("freedma() : END\n");
 }
 EXPORT_SYMBOL(free_dma);
 
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index a174596..42833ee 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -475,9 +475,7 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
-
 static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 
 static const unsigned int sic_iwr_irqs[] = {
 #if defined(BF533_FAMILY)
@@ -514,112 +512,26 @@ static const unsigned int sic_iwr_irqs[] = {
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type)
-{
-	unsigned long flags;
-
-	if ((check_gpio(gpio) < 0) || !type)
-		return -EINVAL;
-
-	local_irq_save_hw(flags);
-	wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-	wakeup_flags_map[gpio] = type;
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_request);
-
-void gpio_pm_wakeup_free(unsigned gpio)
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 {
 	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
-		return;
+		return -EINVAL;
 
 	local_irq_save_hw(flags);
-
-	wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
-	local_irq_restore_hw(flags);
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_free);
-
-static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
-{
-	port_setup(gpio, GPIO_USAGE);
-	set_gpio_dir(gpio, 0);
-	set_gpio_inen(gpio, 1);
-
-	if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
-		set_gpio_edge(gpio, 1);
-	 else
-		set_gpio_edge(gpio, 0);
-
-	if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
-		set_gpio_both(gpio, 1);
+	if (ctrl)
+		wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
 	else
-		set_gpio_both(gpio, 0);
-
-	if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
-		set_gpio_polar(gpio, 1);
-	else
-		set_gpio_polar(gpio, 0);
-
-	SSYNC();
-
-	return 0;
-}
+		wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
 
-u32 bfin_pm_standby_setup(void)
-{
-	u16 bank, mask, i, gpio;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = wakeup_map[gpio_bank(i)];
-		bank = gpio_bank(i);
-
-		gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
-		gpio_array[bank]->maskb = 0;
-
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			gpio_bank_saved[bank].fer   = *port_fer[bank];
-#endif
-			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_array[bank]->both;
-			gpio_bank_saved[bank].reserved =
-						reserved_gpio_map[bank];
-
-			gpio = i;
-
-			while (mask) {
-				if ((mask & 1) && (wakeup_flags_map[gpio] !=
-					PM_WAKE_IGNORE)) {
-					reserved_gpio_map[gpio_bank(gpio)] |=
-							gpio_bit(gpio);
-					bfin_gpio_wakeup_type(gpio,
-						wakeup_flags_map[gpio]);
-					set_gpio_data(gpio, 0); /*Clear*/
-				}
-				gpio++;
-				mask >>= 1;
-			}
-
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
-			gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
-		}
-	}
-
-	AWA_DUMMY_READ(maskb_set);
+	set_gpio_maskb(gpio, ctrl);
+	local_irq_restore_hw(flags);
 
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	u16 bank, mask, i;
 
@@ -627,24 +539,10 @@ void bfin_pm_standby_restore(void)
 		mask = wakeup_map[gpio_bank(i)];
 		bank = gpio_bank(i);
 
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
-#endif
-			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-			reserved_gpio_map[bank] =
-					gpio_bank_saved[bank].reserved;
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
-		}
-
-		gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
+		if (mask)
+			bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
 	}
-	AWA_DUMMY_READ(maskb);
+	return 0;
 }
 
 void bfin_gpio_pm_hibernate_suspend(void)
@@ -708,16 +606,11 @@ void bfin_gpio_pm_hibernate_restore(void)
 #else /* CONFIG_BF54x */
 #ifdef CONFIG_PM
 
-u32 bfin_pm_standby_setup(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
-{
-
-}
-
 void bfin_gpio_pm_hibernate_suspend(void)
 {
 	int i, bank;
@@ -1289,44 +1182,50 @@ __initcall(gpio_register_proc);
 #endif
 
 #ifdef CONFIG_GPIOLIB
-int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_direction_input(gpio);
 }
 
-int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
 {
 	return bfin_gpio_direction_output(gpio, level);
 }
 
-int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_get_value(gpio);
 }
 
-void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
 {
 	return bfin_gpio_set_value(gpio, value);
 }
 
-int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
+static int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_request(gpio, chip->label);
 }
 
-void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
+static void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio)
 {
 	return bfin_gpio_free(gpio);
 }
 
+static int bfin_gpiolib_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio + GPIO_IRQ_BASE;
+}
+
 static struct gpio_chip bfin_chip = {
-	.label			= "Blackfin-GPIOlib",
+	.label			= "BFIN-GPIO",
 	.direction_input	= bfin_gpiolib_direction_input,
 	.get			= bfin_gpiolib_get_value,
 	.direction_output	= bfin_gpiolib_direction_output,
 	.set			= bfin_gpiolib_set_value,
 	.request		= bfin_gpiolib_gpio_request,
 	.free			= bfin_gpiolib_gpio_free,
+	.to_irq			= bfin_gpiolib_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= MAX_BLACKFIN_GPIOS,
 };
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index ed8392c..2c264b5 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -33,6 +33,18 @@ EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);
 
 /*
+ * Because string functions are both inline and exported functions and
+ * folder arch/blackfin/lib is configured as a library path in Makefile,
+ * symbols exported in folder lib  is not linked into built-in.o but
+ * inlined only. In order to export string symbols to kernel module
+ * properly, they should be exported here.
+ */
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+
+/*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
  * doesn't really matter since they're not versioned).
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 8d42b9e..30fd641 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -64,6 +64,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 		icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0);
 	}
 
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	dcplb_tbl[cpu][i_d].addr = addr;
+	dcplb_tbl[cpu][i_d++].data = d_data | CPLB_USER_RD;
+	icplb_tbl[cpu][i_i].addr = addr;
+	icplb_tbl[cpu][i_i++].data = i_data | CPLB_USER_RD;
+#endif
+
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
 #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0
 	dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu);
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 930c01c..87b25b1 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -31,6 +31,12 @@ int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
 int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 int nr_cplb_flush[NR_CPUS];
 
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+#define MGR_ATTR __attribute__((l1_text))
+#else
+#define MGR_ATTR
+#endif
+
 /*
  * Given the contents of the status register, return the index of the
  * CPLB that caused the fault.
@@ -59,7 +65,7 @@ static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS];
 /*
  * Find an ICPLB entry to be evicted and return its index.
  */
-static int evict_one_icplb(unsigned int cpu)
+MGR_ATTR static int evict_one_icplb(unsigned int cpu)
 {
 	int i;
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++)
@@ -74,7 +80,7 @@ static int evict_one_icplb(unsigned int cpu)
 	return i;
 }
 
-static int evict_one_dcplb(unsigned int cpu)
+MGR_ATTR static int evict_one_dcplb(unsigned int cpu)
 {
 	int i;
 	for (i = first_switched_dcplb; i < MAX_CPLBS; i++)
@@ -89,7 +95,7 @@ static int evict_one_dcplb(unsigned int cpu)
 	return i;
 }
 
-static noinline int dcplb_miss(unsigned int cpu)
+MGR_ATTR static noinline int dcplb_miss(unsigned int cpu)
 {
 	unsigned long addr = bfin_read_DCPLB_FAULT_ADDR();
 	int status = bfin_read_DCPLB_STATUS();
@@ -114,10 +120,15 @@ static noinline int dcplb_miss(unsigned int cpu)
 		d_data = L2_DMEMORY;
 	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-			addr &= ~(4 * 1024 * 1024 - 1);
-			d_data &= ~PAGE_SIZE_4KB;
-			d_data |= PAGE_SIZE_4MB;
-			d_data |= CPLB_USER_RD | CPLB_USER_WR;
+			mask = current_rwx_mask[cpu];
+			if (mask) {
+				int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+				int idx = page >> 5;
+				int bit = 1 << (page & 31);
+
+				if (mask[idx] & bit)
+					d_data |= CPLB_USER_RD;
+			}
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -126,7 +137,9 @@ static noinline int dcplb_miss(unsigned int cpu)
 		} else
 			return CPLB_PROT_VIOL;
 	} else if (addr >= _ramend) {
-	    d_data |= CPLB_USER_RD | CPLB_USER_WR;
+		d_data |= CPLB_USER_RD | CPLB_USER_WR;
+		if (reserved_mem_dcache_on)
+			d_data |= CPLB_L1_CHBL;
 	} else {
 		mask = current_rwx_mask[cpu];
 		if (mask) {
@@ -156,7 +169,7 @@ static noinline int dcplb_miss(unsigned int cpu)
 	return 0;
 }
 
-static noinline int icplb_miss(unsigned int cpu)
+MGR_ATTR static noinline int icplb_miss(unsigned int cpu)
 {
 	unsigned long addr = bfin_read_ICPLB_FAULT_ADDR();
 	int status = bfin_read_ICPLB_STATUS();
@@ -204,10 +217,19 @@ static noinline int icplb_miss(unsigned int cpu)
 		i_data = L2_IMEMORY;
 	} else if (addr >= physical_mem_end) {
 		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
-			addr &= ~(4 * 1024 * 1024 - 1);
-			i_data &= ~PAGE_SIZE_4KB;
-			i_data |= PAGE_SIZE_4MB;
-			i_data |= CPLB_USER_RD;
+			if (!(status & FAULT_USERSUPV)) {
+				unsigned long *mask = current_rwx_mask[cpu];
+
+				if (mask) {
+					int page = (addr - (ASYNC_BANK0_BASE - _ramend)) >> PAGE_SHIFT;
+					int idx = page >> 5;
+					int bit = 1 << (page & 31);
+
+					mask += 2 * page_mask_nelts;
+					if (mask[idx] & bit)
+						i_data |= CPLB_USER_RD;
+				}
+			}
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -217,6 +239,8 @@ static noinline int icplb_miss(unsigned int cpu)
 		    return CPLB_PROT_VIOL;
 	} else if (addr >= _ramend) {
 		i_data |= CPLB_USER_RD;
+		if (reserved_mem_icache_on)
+			i_data |= CPLB_L1_CHBL;
 	} else {
 		/*
 		 * Two cases to distinguish - a supervisor access must
@@ -251,7 +275,7 @@ static noinline int icplb_miss(unsigned int cpu)
 	return 0;
 }
 
-static noinline int dcplb_protection_fault(unsigned int cpu)
+MGR_ATTR static noinline int dcplb_protection_fault(unsigned int cpu)
 {
 	int status = bfin_read_DCPLB_STATUS();
 
@@ -271,7 +295,7 @@ static noinline int dcplb_protection_fault(unsigned int cpu)
 	return CPLB_PROT_VIOL;
 }
 
-int cplb_hdr(int seqstat, struct pt_regs *regs)
+MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
 	unsigned int cpu = raw_smp_processor_id();
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 282a791..bfe75af 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -56,6 +56,15 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 		i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
 	}
 
+#ifdef CONFIG_ROMKERNEL
+	/* Cover kernel XIP flash area */
+	addr = CONFIG_ROM_BASE & ~(4 * 1024 * 1024 - 1);
+	d_tbl[i_d].addr = addr;
+	d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB;
+	i_tbl[i_i].addr = addr;
+	i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB;
+#endif
+
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
 	if (cpu == 0) {
 		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index e937f32..04ddcfe 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(dma_free_coherent);
 void __dma_sync(dma_addr_t addr, size_t size,
 		enum dma_data_direction dir)
 {
-	_dma_sync(addr, size, dir);
+	__dma_sync_inline(addr, size, dir);
 }
 EXPORT_SYMBOL(__dma_sync);
 
diff --git a/arch/blackfin/kernel/dumpstack.c b/arch/blackfin/kernel/dumpstack.c
new file mode 100644
index 0000000..5cfbaa2
--- /dev/null
+++ b/arch/blackfin/kernel/dumpstack.c
@@ -0,0 +1,174 @@
+/* Provide basic stack dumping functions
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <asm/trace.h>
+
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+static bool is_bfin_call(unsigned short *addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, addr))
+		return false;
+
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077) ||
+	    (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
+		return true;
+
+	return false;
+
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+#ifdef CONFIG_PRINTK
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
+
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
+	 */
+
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
+			stack = (unsigned long *)task->thread.ksp;
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
+			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	printk(KERN_NOTICE "Stack info:\n");
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
+	}
+	if (fp) {
+		frame = fp;
+		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
+
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
+
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr < endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk(KERN_NOTICE "%p:", addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
+	}
+#endif
+}
+EXPORT_SYMBOL(show_stack);
+
+void dump_stack(void)
+{
+	unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags;
+#endif
+	trace_buffer_save(tflags);
+	dump_bfin_trace_buffer();
+	show_stack(current, &stack);
+	trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_stack);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index f27dc22..686478f 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -44,7 +44,7 @@ ENTRY(_ret_from_fork)
 	sti r4;
 #endif /* CONFIG_IPIPE */
 	SP += -12;
-	call _schedule_tail;
+	pseudo_long_call _schedule_tail, p5;
 	SP += 12;
 	r0 = [sp + PT_IPEND];
 	cc = bittst(r0,1);
@@ -79,7 +79,7 @@ ENTRY(_sys_vfork)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _bfin_vfork;
+	pseudo_long_call _bfin_vfork, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
@@ -90,7 +90,7 @@ ENTRY(_sys_clone)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _bfin_clone;
+	pseudo_long_call _bfin_clone, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
@@ -101,7 +101,7 @@ ENTRY(_sys_rt_sigreturn)
 	r0 += 24;
 	[--sp] = rets;
 	SP += -12;
-	call _do_rt_sigreturn;
+	pseudo_long_call _do_rt_sigreturn, p2;
 	SP += 12;
 	rets = [sp++];
 	rts;
diff --git a/arch/blackfin/kernel/exception.c b/arch/blackfin/kernel/exception.c
new file mode 100644
index 0000000..9208b5f
--- /dev/null
+++ b/arch/blackfin/kernel/exception.c
@@ -0,0 +1,45 @@
+/* Basic functions for adding/removing custom exception handlers
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/module.h>
+#include <asm/irq_handler.h>
+
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != ex_replaceable)
+		return -EBUSY;
+
+	ex_table[exception] = handler;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != handler)
+		return -EBUSY;
+
+	ex_table[exception] = ex_replaceable;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index 76dd4fb..d66446b 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -1,7 +1,7 @@
 /*
  * mcount and friends -- ftrace stuff
  *
- * Copyright (C) 2009 Analog Devices Inc.
+ * Copyright (C) 2009-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -21,6 +21,15 @@
  * function will be waiting there.  mmmm pie.
  */
 ENTRY(__mcount)
+#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	/* optional micro optimization: return if stopped */
+	p1.l = _function_trace_stop;
+	p1.h = _function_trace_stop;
+	r3 = [p1];
+	cc = r3 == 0;
+	if ! cc jump _ftrace_stub (bp);
+#endif
+
 	/* save third function arg early so we can do testing below */
 	[--sp] = r2;
 
@@ -106,9 +115,12 @@ ENTRY(_ftrace_graph_caller)
 	[--sp] = r1;
 	[--sp] = rets;
 
-	/* prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) */
-	r0 = sp;
-	r1 = rets;
+	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
+	r0 = sp;	/* unsigned long *parent */
+	r1 = rets;	/* unsigned long self_addr */
+#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+	r2 = fp;	/* unsigned long frame_pointer */
+#endif
 	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
@@ -127,6 +139,9 @@ ENTRY(_return_to_handler)
 	[--sp] = r1;
 
 	/* get original return address */
+#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+	r0 = fp;	/* Blackfin is sane, so omit this */
+#endif
 	call _ftrace_return_to_handler;
 	rets = r0;
 
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index f2c85ac..a61d948 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -16,7 +16,8 @@
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
  */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+                           unsigned long frame_pointer)
 {
 	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
@@ -24,7 +25,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, 0) == -EBUSY)
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth,
+	                             frame_pointer) == -EBUSY)
 		return;
 
 	trace.func = self_addr;
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index 118c5b9..d3970e8 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -28,5 +28,5 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry.
  */
 union thread_union init_thread_union
-    __attribute__ ((__section__(".init_task.data"))) = {
+    __init_task_data = {
 INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index a77307a..1a496cd 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -27,7 +27,6 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <linux/bitops.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kthread.h>
 #include <linux/unistd.h>
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index 34c7c3e..08bc44e 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -66,7 +66,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	gdb_regs[BFIN_RETN] = regs->retn;
 	gdb_regs[BFIN_RETE] = regs->rete;
 	gdb_regs[BFIN_PC] = regs->pc;
-	gdb_regs[BFIN_CC] = 0;
+	gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
 	gdb_regs[BFIN_EXTRA1] = 0;
 	gdb_regs[BFIN_EXTRA2] = 0;
 	gdb_regs[BFIN_EXTRA3] = 0;
@@ -145,7 +145,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 #endif
 }
 
-struct hw_breakpoint {
+static struct hw_breakpoint {
 	unsigned int occupied:1;
 	unsigned int skip:1;
 	unsigned int enabled:1;
@@ -155,7 +155,7 @@ struct hw_breakpoint {
 	unsigned int addr;
 } breakinfo[HW_WATCHPOINT_NUM];
 
-int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+static int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
 	int bfin_type;
@@ -202,7 +202,7 @@ int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 	return -ENOSPC;
 }
 
-int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
+static int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 {
 	int breakno;
 	int bfin_type;
@@ -230,7 +230,7 @@ int bfin_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype type)
 	return 0;
 }
 
-void bfin_remove_all_hw_break(void)
+static void bfin_remove_all_hw_break(void)
 {
 	int breakno;
 
@@ -242,7 +242,7 @@ void bfin_remove_all_hw_break(void)
 		breakinfo[breakno].type = TYPE_DATA_WATCHPOINT;
 }
 
-void bfin_correct_hw_break(void)
+static void bfin_correct_hw_break(void)
 {
 	int breakno;
 	unsigned int wpiactl = 0;
@@ -439,6 +439,11 @@ int kgdb_validate_break_address(unsigned long addr)
 	return -EFAULT;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->retx = ip;
+}
+
 int kgdb_arch_init(void)
 {
 	kgdb_single_step = 0;
diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c
new file mode 100644
index 0000000..0b5f72f
--- /dev/null
+++ b/arch/blackfin/kernel/nmi.c
@@ -0,0 +1,299 @@
+/*
+ * Blackfin nmi_watchdog Driver
+ *
+ * Originally based on bfin_wdt.c
+ * Copyright 2010-2010 Analog Devices Inc.
+ *		Graff Yang <graf.yang@analog.com>
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/bitops.h>
+#include <linux/hardirq.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/nmi.h>
+#include <linux/smp.h>
+#include <linux/timer.h>
+#include <asm/blackfin.h>
+#include <asm/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/bfin_watchdog.h>
+
+#define DRV_NAME "nmi-wdt"
+
+#define NMI_WDT_TIMEOUT 5          /* 5 seconds */
+#define NMI_CHECK_TIMEOUT (4 * HZ) /* 4 seconds in jiffies */
+static int nmi_wdt_cpu = 1;
+
+static unsigned int timeout = NMI_WDT_TIMEOUT;
+static int nmi_active;
+
+static unsigned short wdoga_ctl;
+static unsigned int wdoga_cnt;
+static struct corelock_slot saved_corelock;
+static atomic_t nmi_touched[NR_CPUS];
+static struct timer_list ntimer;
+
+enum {
+	COREA_ENTER_NMI = 0,
+	COREA_EXIT_NMI,
+	COREB_EXIT_NMI,
+
+	NMI_EVENT_NR,
+};
+static unsigned long nmi_event __attribute__ ((__section__(".l2.bss")));
+
+/* we are in nmi, non-atomic bit ops is safe */
+static inline void set_nmi_event(int event)
+{
+	__set_bit(event, &nmi_event);
+}
+
+static inline void wait_nmi_event(int event)
+{
+	while (!test_bit(event, &nmi_event))
+		barrier();
+	__clear_bit(event, &nmi_event);
+}
+
+static inline void send_corea_nmi(void)
+{
+	wdoga_ctl = bfin_read_WDOGA_CTL();
+	wdoga_cnt = bfin_read_WDOGA_CNT();
+
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CNT(0);
+	bfin_write_WDOGA_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline void restore_corea_nmi(void)
+{
+	bfin_write_WDOGA_CTL(WDEN_DISABLE);
+	bfin_write_WDOGA_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+
+	bfin_write_WDOGA_CNT(wdoga_cnt);
+	bfin_write_WDOGA_CTL(wdoga_ctl);
+}
+
+static inline void save_corelock(void)
+{
+	saved_corelock = corelock;
+	corelock.lock = 0;
+}
+
+static inline void restore_corelock(void)
+{
+	corelock = saved_corelock;
+}
+
+
+static inline void nmi_wdt_keepalive(void)
+{
+	bfin_write_WDOGB_STAT(0);
+}
+
+static inline void nmi_wdt_stop(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_DISABLE);
+}
+
+/* before calling this function, you must stop the WDT */
+static inline void nmi_wdt_clear(void)
+{
+	/* clear TRO bit, disable event generation */
+	bfin_write_WDOGB_CTL(WDOG_EXPIRED | WDEN_DISABLE | ICTL_NONE);
+}
+
+static inline void nmi_wdt_start(void)
+{
+	bfin_write_WDOGB_CTL(WDEN_ENABLE | ICTL_NMI);
+}
+
+static inline int nmi_wdt_running(void)
+{
+	return ((bfin_read_WDOGB_CTL() & WDEN_MASK) != WDEN_DISABLE);
+}
+
+static inline int nmi_wdt_set_timeout(unsigned long t)
+{
+	u32 cnt, max_t, sclk;
+	int run;
+
+	sclk = get_sclk();
+	max_t = -1 / sclk;
+	cnt = t * sclk;
+	if (t > max_t) {
+		pr_warning("NMI: timeout value is too large\n");
+		return -EINVAL;
+	}
+
+	run = nmi_wdt_running();
+	nmi_wdt_stop();
+	bfin_write_WDOGB_CNT(cnt);
+	if (run)
+		nmi_wdt_start();
+
+	timeout = t;
+
+	return 0;
+}
+
+int check_nmi_wdt_touched(void)
+{
+	unsigned int this_cpu = smp_processor_id();
+	unsigned int cpu;
+
+	cpumask_t mask = cpu_online_map;
+
+	if (!atomic_read(&nmi_touched[this_cpu]))
+		return 0;
+
+	atomic_set(&nmi_touched[this_cpu], 0);
+
+	cpu_clear(this_cpu, mask);
+	for_each_cpu_mask(cpu, mask) {
+		invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]),
+				(unsigned long)(&nmi_touched[cpu]));
+		if (!atomic_read(&nmi_touched[cpu]))
+			return 0;
+		atomic_set(&nmi_touched[cpu], 0);
+	}
+
+	return 1;
+}
+
+static void nmi_wdt_timer(unsigned long data)
+{
+	if (check_nmi_wdt_touched())
+		nmi_wdt_keepalive();
+
+	mod_timer(&ntimer, jiffies + NMI_CHECK_TIMEOUT);
+}
+
+static int __init init_nmi_wdt(void)
+{
+	nmi_wdt_set_timeout(timeout);
+	nmi_wdt_start();
+	nmi_active = true;
+
+	init_timer(&ntimer);
+	ntimer.function = nmi_wdt_timer;
+	ntimer.expires = jiffies + NMI_CHECK_TIMEOUT;
+	add_timer(&ntimer);
+
+	pr_info("nmi_wdt: initialized: timeout=%d sec\n", timeout);
+	return 0;
+}
+device_initcall(init_nmi_wdt);
+
+void touch_nmi_watchdog(void)
+{
+	atomic_set(&nmi_touched[smp_processor_id()], 1);
+}
+
+/* Suspend/resume support */
+#ifdef CONFIG_PM
+static int nmi_wdt_suspend(struct sys_device *dev, pm_message_t state)
+{
+	nmi_wdt_stop();
+	return 0;
+}
+
+static int nmi_wdt_resume(struct sys_device *dev)
+{
+	if (nmi_active)
+		nmi_wdt_start();
+	return 0;
+}
+
+static struct sysdev_class nmi_sysclass = {
+	.name		= DRV_NAME,
+	.resume		= nmi_wdt_resume,
+	.suspend	= nmi_wdt_suspend,
+};
+
+static struct sys_device device_nmi_wdt = {
+	.id	= 0,
+	.cls	= &nmi_sysclass,
+};
+
+static int __init init_nmi_wdt_sysfs(void)
+{
+	int error;
+
+	if (!nmi_active)
+		return 0;
+
+	error = sysdev_class_register(&nmi_sysclass);
+	if (!error)
+		error = sysdev_register(&device_nmi_wdt);
+	return error;
+}
+late_initcall(init_nmi_wdt_sysfs);
+
+#endif	/* CONFIG_PM */
+
+
+asmlinkage notrace void do_nmi(struct pt_regs *fp)
+{
+	unsigned int cpu = smp_processor_id();
+	nmi_enter();
+
+	cpu_pda[cpu].__nmi_count += 1;
+
+	if (cpu == nmi_wdt_cpu) {
+		/* CoreB goes here first */
+
+		/* reload the WDOG_STAT */
+		nmi_wdt_keepalive();
+
+		/* clear nmi interrupt for CoreB */
+		nmi_wdt_stop();
+		nmi_wdt_clear();
+
+		/* trigger NMI interrupt of CoreA */
+		send_corea_nmi();
+
+		/* waiting CoreB to enter NMI */
+		wait_nmi_event(COREA_ENTER_NMI);
+
+		/* recover WDOGA's settings */
+		restore_corea_nmi();
+
+		save_corelock();
+
+		/* corelock is save/cleared, CoreA is dummping messages */
+
+		wait_nmi_event(COREA_EXIT_NMI);
+	} else {
+		/* OK, CoreA entered NMI */
+		set_nmi_event(COREA_ENTER_NMI);
+	}
+
+	pr_emerg("\nNMI Watchdog detected LOCKUP, dump for CPU %d\n", cpu);
+	dump_bfin_process(fp);
+	dump_bfin_mem(fp);
+	show_regs(fp);
+	dump_bfin_trace_buffer();
+	show_stack(current, (unsigned long *)fp);
+
+	if (cpu == nmi_wdt_cpu) {
+		pr_emerg("This fault is not recoverable, sorry!\n");
+
+		/* CoreA dump finished, restore the corelock */
+		restore_corelock();
+
+		set_nmi_event(COREB_EXIT_NMI);
+	} else {
+		/* CoreB dump finished, notice the CoreA we are done */
+		set_nmi_event(COREA_EXIT_NMI);
+
+		/* synchronize with CoreA */
+		wait_nmi_event(COREB_EXIT_NMI);
+	}
+
+	nmi_exit();
+}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index b56b0e4..93ec07d 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -11,6 +11,7 @@
 #include <linux/unistd.h>
 #include <linux/user.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/tick.h>
 #include <linux/fs.h>
@@ -98,13 +99,6 @@ void cpu_idle(void)
 	}
 }
 
-/* Fill in the fpu structure for a core dump.  */
-
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
-{
-	return 1;
-}
-
 /*
  * This gets run with P1 containing the
  * function to call, and R1 containing
diff --git a/arch/blackfin/kernel/pseudodbg.c b/arch/blackfin/kernel/pseudodbg.c
new file mode 100644
index 0000000..db85bc9
--- /dev/null
+++ b/arch/blackfin/kernel/pseudodbg.c
@@ -0,0 +1,191 @@
+/* The fake debug assert instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+const char * const greg_names[] = {
+	"R0",    "R1",      "R2",     "R3",    "R4",    "R5",    "R6",     "R7",
+	"P0",    "P1",      "P2",     "P3",    "P4",    "P5",    "SP",     "FP",
+	"I0",    "I1",      "I2",     "I3",    "M0",    "M1",    "M2",     "M3",
+	"B0",    "B1",      "B2",     "B3",    "L0",    "L1",    "L2",     "L3",
+	"A0.X",  "A0.W",    "A1.X",   "A1.W",  "<res>", "<res>", "ASTAT",  "RETS",
+	"<res>", "<res>",   "<res>",  "<res>", "<res>", "<res>", "<res>",  "<res>",
+	"LC0",   "LT0",     "LB0",    "LC1",   "LT1",   "LB1",   "CYCLES", "CYCLES2",
+	"USP",   "SEQSTAT", "SYSCFG", "RETI",  "RETX",  "RETN",  "RETE",   "EMUDAT",
+};
+
+static const char *get_allreg_name(int grp, int reg)
+{
+	return greg_names[(grp << 3) | reg];
+}
+
+/*
+ * Unfortunately, the pt_regs structure is not laid out the same way as the
+ * hardware register file, so we need to do some fix ups.
+ *
+ * CYCLES is not stored in the pt_regs structure - so, we just read it from
+ * the hardware.
+ *
+ * Don't support:
+ *  - All reserved registers
+ *  - All in group 7 are (supervisors only)
+ */
+
+static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
+{
+	long *val = &fp->r0;
+	unsigned long tmp;
+
+	/* Only do Dregs and Pregs for now */
+	if (grp == 5 ||
+	   (grp == 4 && (reg == 4 || reg == 5)) ||
+	   (grp == 7))
+		return false;
+
+	if (grp == 0 || (grp == 1 && reg < 6))
+		val -= (reg + 8 * grp);
+	else if (grp == 1 && reg == 6)
+		val = &fp->usp;
+	else if (grp == 1 && reg == 7)
+		val = &fp->fp;
+	else if (grp == 2) {
+		val = &fp->i0;
+		val -= reg;
+	} else if (grp == 3 && reg >= 4) {
+		val = &fp->l0;
+		val -= (reg - 4);
+	} else if (grp == 3 && reg < 4) {
+		val = &fp->b0;
+		val -= reg;
+	} else if (grp == 4 && reg < 4) {
+		val = &fp->a0x;
+		val -= reg;
+	} else if (grp == 4 && reg == 6)
+		val = &fp->astat;
+	else if (grp == 4 && reg == 7)
+		val = &fp->rets;
+	else if (grp == 6 && reg < 6) {
+		val = &fp->lc0;
+		val -= reg;
+	} else if (grp == 6 && reg == 6) {
+		__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
+		val = &tmp;
+	} else if (grp == 6 && reg == 7) {
+		__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
+		val = &tmp;
+	}
+
+	*value = *val;
+	return true;
+
+}
+
+#define PseudoDbg_Assert_opcode         0xf0000000
+#define PseudoDbg_Assert_expected_bits  0
+#define PseudoDbg_Assert_expected_mask  0xffff
+#define PseudoDbg_Assert_regtest_bits   16
+#define PseudoDbg_Assert_regtest_mask   0x7
+#define PseudoDbg_Assert_grp_bits       19
+#define PseudoDbg_Assert_grp_mask       0x7
+#define PseudoDbg_Assert_dbgop_bits     22
+#define PseudoDbg_Assert_dbgop_mask     0x3
+#define PseudoDbg_Assert_dontcare_bits  24
+#define PseudoDbg_Assert_dontcare_mask  0x7
+#define PseudoDbg_Assert_code_bits      27
+#define PseudoDbg_Assert_code_mask      0x1f
+
+/*
+ * DBGA - debug assert
+ */
+bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
+{
+	int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
+	int dbgop    = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
+	int grp      = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
+	int regtest  = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
+	long value;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
+		return false;
+
+	if (!fix_up_reg(fp, &value, grp, regtest))
+		return false;
+
+	if (dbgop == 0 || dbgop == 2) {
+		/* DBGA ( regs_lo , uimm16 ) */
+		/* DBGAL ( regs , uimm16 ) */
+		if (expected != (value & 0xFFFF)) {
+			pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)(value & 0xFFFF));
+			return false;
+		}
+
+	} else if (dbgop == 1 || dbgop == 3) {
+		/* DBGA ( regs_hi , uimm16 ) */
+		/* DBGAH ( regs , uimm16 ) */
+		if (expected != ((value >> 16) & 0xFFFF)) {
+			pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)((value >> 16) & 0xFFFF));
+			return false;
+		}
+	}
+
+	fp->pc += 4;
+	return true;
+}
+
+#define PseudoDbg_opcode        0xf8000000
+#define PseudoDbg_reg_bits      0
+#define PseudoDbg_reg_mask      0x7
+#define PseudoDbg_grp_bits      3
+#define PseudoDbg_grp_mask      0x7
+#define PseudoDbg_fn_bits       6
+#define PseudoDbg_fn_mask       0x3
+#define PseudoDbg_code_bits     8
+#define PseudoDbg_code_mask     0xff
+
+/*
+ * DBG - debug (dump a register value out)
+ */
+bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
+{
+	int grp, fn, reg;
+	long value, value1;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_opcode)
+		return false;
+
+	opcode >>= 16;
+	grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
+	fn  = ((opcode >> PseudoDbg_fn_bits)  & PseudoDbg_fn_mask);
+	reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
+
+	if (fn == 3 && (reg == 0 || reg == 1)) {
+		if (!fix_up_reg(fp, &value, 4, 2 * reg))
+			return false;
+		if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
+			return false;
+
+		pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
+		fp->pc += 2;
+		return true;
+
+	} else if (fn == 0) {
+		if (!fix_up_reg(fp, &value, grp, reg))
+			return false;
+
+		pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
+		fp->pc += 2;
+		return true;
+	}
+
+	return false;
+}
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 65567dc..6ec7768 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -1,6 +1,6 @@
 /*
  * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- * these modifications are Copyright 2004-2009 Analog Devices Inc.
+ * these modifications are Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2
  */
@@ -9,10 +9,13 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/elf.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/regset.h>
 #include <linux/signal.h>
+#include <linux/tracehook.h>
 #include <linux/uaccess.h>
 
 #include <asm/page.h>
@@ -25,90 +28,57 @@
 #include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
-#define TEXT_OFFSET 0
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-/* determines which bits in the SYSCFG reg the user has access to. */
-/* 1 = access 0 = no access */
-#define SYSCFG_MASK 0x0007	/* SYSCFG reg */
-/* sets the trace bits. */
-#define TRACE_BITS 0x0001
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-
-/*
- * Get the address of the live pt_regs for the specified task.
- * These are saved onto the top kernel stack when the process
- * is not running.
- *
- * Note: if a user thread is execve'd from kernel space, the
- * kernel stack will not be empty on entry to the kernel, so
- * ptracing these tasks will fail.
- */
-static inline struct pt_regs *get_user_regs(struct task_struct *task)
-{
-	return (struct pt_regs *)
-	    ((unsigned long)task_stack_page(task) +
-	     (THREAD_SIZE - sizeof(struct pt_regs)));
-}
-
-/*
- * Get all user integer registers.
- */
-static inline int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs regs;
-	memcpy(&regs, get_user_regs(tsk), sizeof(regs));
-	regs.usp = tsk->thread.usp;
-	return copy_to_user(uregs, &regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- * saved.  Notice that usp has no stack-slot and needs to be treated
- * specially (see get_reg/put_reg below).
- */
-
 /*
  * Get contents of register REGNO in task TASK.
  */
-static inline long get_reg(struct task_struct *task, int regno)
+static inline long
+get_reg(struct task_struct *task, long regno, unsigned long __user *datap)
 {
-	unsigned char *reg_ptr;
+	long tmp;
+	struct pt_regs *regs = task_pt_regs(task);
 
-	struct pt_regs *regs =
-	    (struct pt_regs *)((unsigned long)task_stack_page(task) +
-			       (THREAD_SIZE - sizeof(struct pt_regs)));
-	reg_ptr = (char *)regs;
+	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+		return -EIO;
 
 	switch (regno) {
+	case PT_TEXT_ADDR:
+		tmp = task->mm->start_code;
+		break;
+	case PT_TEXT_END_ADDR:
+		tmp = task->mm->end_code;
+		break;
+	case PT_DATA_ADDR:
+		tmp = task->mm->start_data;
+		break;
 	case PT_USP:
-		return task->thread.usp;
+		tmp = task->thread.usp;
+		break;
 	default:
-		if (regno <= 216)
-			return *(long *)(reg_ptr + regno);
+		if (regno < sizeof(*regs)) {
+			void *reg_ptr = regs;
+			tmp = *(long *)(reg_ptr + regno);
+		} else
+			return -EIO;
 	}
-	/* slight mystery ... never seems to come here but kernel misbehaves without this code! */
 
-	printk(KERN_WARNING "Request to get for unknown register %d\n", regno);
-	return 0;
+	return put_user(tmp, datap);
 }
 
 /*
  * Write contents of register REGNO in task TASK.
  */
 static inline int
-put_reg(struct task_struct *task, int regno, unsigned long data)
+put_reg(struct task_struct *task, long regno, unsigned long data)
 {
-	char *reg_ptr;
+	struct pt_regs *regs = task_pt_regs(task);
 
-	struct pt_regs *regs =
-	    (struct pt_regs *)((unsigned long)task_stack_page(task) +
-			       (THREAD_SIZE - sizeof(struct pt_regs)));
-	reg_ptr = (char *)regs;
+	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+		return -EIO;
 
 	switch (regno) {
 	case PT_PC:
@@ -125,10 +95,18 @@ put_reg(struct task_struct *task, int regno, unsigned long data)
 		regs->usp = data;
 		task->thread.usp = data;
 		break;
+	case PT_SYSCFG:	/* don't let userspace screw with this */
+		if ((data & ~1) != 0x6)
+			pr_warning("ptrace: ignore syscfg write of %#lx\n", data);
+		break;		/* regs->syscfg = data; break; */
 	default:
-		if (regno <= 216)
-			*(long *)(reg_ptr + regno) = data;
+		if (regno < sizeof(*regs)) {
+			void *reg_offset = regs;
+			*(long *)(reg_offset + regno) = data;
+		}
+		/* Ignore writes to pseudo registers */
 	}
+
 	return 0;
 }
 
@@ -160,24 +138,98 @@ static inline int is_user_addr_valid(struct task_struct *child,
 	return -EIO;
 }
 
-void ptrace_enable(struct task_struct *child)
+/*
+ * retrieve the contents of Blackfin userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* This sucks ... */
+	regs->usp = target->thread.usp;
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs, 0, sizeof(*regs));
+	if (ret < 0)
+		return ret;
+
+	return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					sizeof(*regs), -1);
+}
+
+/*
+ * update the contents of the Blackfin userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
 {
-	unsigned long tmp;
-	tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
-	put_reg(child, PT_SYSCFG, tmp);
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* Don't let people set SYSCFG (it's at the end of pt_regs) */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 regs, 0, PT_SYSCFG);
+	if (ret < 0)
+		return ret;
+
+	/* This sucks ... */
+	target->thread.usp = regs->usp;
+	/* regs->retx = regs->pc; */
+
+	return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					PT_SYSCFG, -1);
 }
 
 /*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
+ * Define the register sets available on the Blackfin under Linux
  */
-void ptrace_disable(struct task_struct *child)
+enum bfin_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset bfin_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type = NT_PRSTATUS,
+		.n              = sizeof(struct pt_regs) / sizeof(long),
+		.size           = sizeof(long),
+		.align          = sizeof(long),
+		.get            = genregs_get,
+		.set            = genregs_set,
+	},
+};
+
+static const struct user_regset_view user_bfin_native_view = {
+	.name      = "Blackfin",
+	.e_machine = EM_BLACKFIN,
+	.regsets   = bfin_regsets,
+	.n         = ARRAY_SIZE(bfin_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_bfin_native_view;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg |= SYSCFG_SSSTEP;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
-	unsigned long tmp;
-	/* make sure the single step bit is not set. */
-	tmp = get_reg(child, PT_SYSCFG) & ~TRACE_BITS;
-	put_reg(child, PT_SYSCFG, tmp);
+	struct pt_regs *regs = task_pt_regs(child);
+	regs->syscfg &= ~SYSCFG_SSSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -240,62 +292,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-		/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR:
-		{
-			unsigned long tmp;
-			ret = -EIO;
-			tmp = 0;
-			if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
-				printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning "
-				                    "0 - %x sizeof(pt_regs) is %lx\n",
-				     (int)addr, sizeof(struct pt_regs));
-				break;
-			}
-			if (addr == sizeof(struct pt_regs)) {
-				/* PT_TEXT_ADDR */
-				tmp = child->mm->start_code + TEXT_OFFSET;
-			} else if (addr == (sizeof(struct pt_regs) + 4)) {
-				/* PT_TEXT_END_ADDR */
-				tmp = child->mm->end_code;
-			} else if (addr == (sizeof(struct pt_regs) + 8)) {
-				/* PT_DATA_ADDR */
-				tmp = child->mm->start_data;
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-			} else if (addr == (sizeof(struct pt_regs) + 12)) {
-				goto case_PTRACE_GETFDPIC_EXEC;
-			} else if (addr == (sizeof(struct pt_regs) + 16)) {
-				goto case_PTRACE_GETFDPIC_INTERP;
-#endif
-			} else {
-				tmp = get_reg(child, addr);
-			}
-			ret = put_user(tmp, datap);
-			break;
-		}
-
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	case PTRACE_GETFDPIC: {
-		unsigned long tmp = 0;
-
-		switch (addr) {
-		case_PTRACE_GETFDPIC_EXEC:
-		case PTRACE_GETFDPIC_EXEC:
-			tmp = child->mm->context.exec_fdpic_loadmap;
-			break;
-		case_PTRACE_GETFDPIC_INTERP:
-		case PTRACE_GETFDPIC_INTERP:
-			tmp = child->mm->context.interp_fdpic_loadmap;
-			break;
-		default:
-			break;
-		}
-
-		ret = put_user(tmp, datap);
-		break;
-	}
-#endif
-
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
 		pr_debug("ptrace: PTRACE_PEEKDATA\n");
@@ -336,79 +332,44 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-	case PTRACE_POKEUSR:	/* write the word at location addr in the USER area */
-		ret = -EIO;
-		if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
-			printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n");
-			break;
-		}
-
-		if (addr >= (sizeof(struct pt_regs))) {
-			ret = 0;
-			break;
-		}
-		if (addr == PT_SYSCFG) {
-			data &= SYSCFG_MASK;
-			data |= get_reg(child, PT_SYSCFG);
+	case PTRACE_PEEKUSR:
+		switch (addr) {
+#ifdef CONFIG_BINFMT_ELF_FDPIC	/* backwards compat */
+		case PT_FDPIC_EXEC:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_EXEC;
+			goto case_default;
+		case PT_FDPIC_INTERP:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_INTERP;
+			goto case_default;
+#endif
+		default:
+			ret = get_reg(child, addr, datap);
 		}
-		ret = put_reg(child, addr, data);
-		break;
-
-	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:	/* restart after signal. */
-		pr_debug("ptrace: syscall/cont\n");
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		ptrace_disable(child);
-		pr_debug("ptrace: before wake_up_process\n");
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		ptrace_disable(child);
-		wake_up_process(child);
+		pr_debug("ptrace: PEEKUSR reg %li with %#lx = %i\n", addr, data, ret);
 		break;
 
-	case PTRACE_SINGLESTEP:	/* set the trap flag. */
-		pr_debug("ptrace: single step\n");
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		ptrace_enable(child);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
+	case PTRACE_POKEUSR:
+		ret = put_reg(child, addr, data);
+		pr_debug("ptrace: POKEUSR reg %li with %li = %i\n", addr, data, ret);
 		break;
 
 	case PTRACE_GETREGS:
-		/* Get all gp regs from the child. */
-		ret = ptrace_getregs(child, datap);
-		break;
+		pr_debug("ptrace: PTRACE_GETREGS\n");
+		return copy_regset_to_user(child, &user_bfin_native_view,
+					   REGSET_GENERAL,
+					   0, sizeof(struct pt_regs),
+					   (void __user *)data);
 
 	case PTRACE_SETREGS:
-		printk(KERN_WARNING "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
-		/* Set all gp regs in the child. */
-		ret = 0;
-		break;
+		pr_debug("ptrace: PTRACE_SETREGS\n");
+		return copy_regset_from_user(child, &user_bfin_native_view,
+					     REGSET_GENERAL,
+					     0, sizeof(struct pt_regs),
+					     (const void __user *)data);
 
+	case_default:
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -417,27 +378,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	 * between a syscall stop and SIGTRAP delivery
-	 */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(regs);
+
+	return ret;
+}
+
+asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 95448ae..d37a397 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -220,6 +220,16 @@ void __init bfin_relocate_l1_mem(void)
 		memcpy(_stext_l2, _l2_lma, l2_len);
 }
 
+#ifdef CONFIG_ROMKERNEL
+void __init bfin_relocate_xip_data(void)
+{
+	early_shadow_stamp();
+
+	memcpy(_sdata, _data_lma, (unsigned long)_data_len - THREAD_SIZE + sizeof(struct thread_info));
+	memcpy(_sinitdata, _init_data_lma, (unsigned long)_init_data_len);
+}
+#endif
+
 /* add_memory_region to memmap */
 static void __init add_memory_region(unsigned long long start,
 			      unsigned long long size, int type)
@@ -504,7 +514,7 @@ static __init void memory_setup(void)
 #endif
 	unsigned long max_mem;
 
-	_rambase = (unsigned long)_stext;
+	_rambase = CONFIG_BOOT_LOAD;
 	_ramstart = (unsigned long)_end;
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
@@ -597,7 +607,12 @@ static __init void memory_setup(void)
 	}
 
 #ifdef CONFIG_MPU
+#if defined(CONFIG_ROMFS_ON_MTD) && defined(CONFIG_MTD_ROM)
+	page_mask_nelts = (((_ramend + ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE -
+					ASYNC_BANK0_BASE) >> PAGE_SHIFT) + 31) / 32;
+#else
 	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
+#endif
 	page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
 #endif
 
@@ -630,7 +645,7 @@ static __init void memory_setup(void)
 		__bss_start, __bss_stop,
 		_sdata, _edata,
 		(void *)&init_thread_union,
-		(void *)((int)(&init_thread_union) + 0x2000),
+		(void *)((int)(&init_thread_union) + THREAD_SIZE),
 		__init_begin, __init_end,
 		(void *)_ramstart, (void *)memory_end
 #ifdef CONFIG_MTD_UCLINUX
@@ -792,10 +807,17 @@ static inline int __init get_mem_size(void)
 	BUG();
 }
 
+__attribute__((weak))
+void __init native_machine_early_platform_add_devices(void)
+{
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	native_machine_early_platform_add_devices();
+
 	enable_shadow_console();
 
 	/* Check to make sure we are running on the right processor */
@@ -903,7 +925,7 @@ void __init setup_arch(char **cmdline_p)
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
 	else if (bfin_compiled_revid() == -1)
@@ -1217,10 +1239,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
 		   BFIN_DLINES);
 #ifdef __ARCH_SYNC_CORE_DCACHE
-	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count);
+	seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", dcache_invld_count[cpu_num]);
 #endif
 #ifdef __ARCH_SYNC_CORE_ICACHE
-	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
+	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", icache_invld_count[cpu_num]);
 #endif
 
 	if (cpu_num != num_possible_cpus() - 1)
@@ -1249,8 +1271,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
 		 physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
 	seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
-		((int)memory_end - (int)_stext) >> 10,
-		_stext,
+		((int)memory_end - (int)_rambase) >> 10,
+		(void *)_rambase,
 		(void *)memory_end);
 	seq_printf(m, "\n");
 
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index e0fd63e..d536f35 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
@@ -17,6 +17,7 @@
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/fixed_code.h>
+#include <asm/syscall.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
@@ -50,6 +51,9 @@ rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *p
 	unsigned long usp = 0;
 	int err = 0;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 #define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
 
 	/* restore passed registers */
@@ -206,16 +210,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
 	regs->r1 = (unsigned long)(&frame->info);
 	regs->r2 = (unsigned long)(&frame->uc);
 
-	/*
-	 * Clear the trace flag when entering the signal handler, but
-	 * notify any tracer that was single-stepping it. The tracer
-	 * may want to single-step inside the handler too.
-	 */
-	if (regs->syscfg & TRACE_BITS) {
-		regs->syscfg &= ~TRACE_BITS;
-		ptrace_notify(SIGTRAP);
-	}
-
 	return 0;
 
  give_sigsegv:
@@ -247,6 +241,11 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 		regs->r0 = regs->orig_r0;
 		regs->pc -= 2;
 		break;
+
+	case -ERESTART_RESTARTBLOCK:
+		regs->p0 = __NR_restart_syscall;
+		regs->pc -= 2;
+		break;
 	}
 }
 
@@ -315,6 +314,9 @@ asmlinkage void do_signal(struct pt_regs *regs)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+				test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index 2e7f8e1..bdc1e2f 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -47,3 +47,26 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
 }
 EXPORT_SYMBOL(get_fb_unmapped_area);
 #endif
+
+/* Needed for legacy userspace atomic emulation */
+static DEFINE_SPINLOCK(bfin_spinlock_lock);
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+__attribute__((l1_text))
+#endif
+asmlinkage int sys_bfin_spinlock(int *p)
+{
+	int ret, tmp = 0;
+
+	spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
+	ret = get_user(tmp, p);
+	if (likely(ret == 0)) {
+		if (unlikely(tmp))
+			ret = 1;
+		else
+			put_user(1, p);
+	}
+	spin_unlock(&bfin_spinlock_lock);
+
+	return ret;
+}
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 17c38c5..8c9a43d 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -21,6 +21,7 @@
 #include <asm/blackfin.h>
 #include <asm/time.h>
 #include <asm/gptimers.h>
+#include <asm/nmi.h>
 
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
@@ -50,7 +51,11 @@
 
 static notrace cycle_t bfin_read_cycles(struct clocksource *cs)
 {
+#ifdef CONFIG_CPU_FREQ
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
+#else
+	return get_cycles();
+#endif
 }
 
 static struct clocksource bfin_cs_cycles = {
@@ -132,7 +137,6 @@ static int __init bfin_cs_gptimer0_init(void)
 # define bfin_cs_gptimer0_init()
 #endif
 
-
 #if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
 /* prefer to use cycles since it has higher rating */
 notrace unsigned long long sched_clock(void)
@@ -145,47 +149,8 @@ notrace unsigned long long sched_clock(void)
 }
 #endif
 
-#ifdef CONFIG_CORE_TIMER_IRQ_L1
-__attribute__((l1_text))
-#endif
-irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-static int bfin_timer_set_next_event(unsigned long, \
-		struct clock_event_device *);
-
-static void bfin_timer_set_mode(enum clock_event_mode, \
-		struct clock_event_device *);
-
-static struct clock_event_device clockevent_bfin = {
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	.name		= "bfin_gptimer0",
-	.rating		= 300,
-	.irq		= IRQ_TIMER0,
-#else
-	.name		= "bfin_core_timer",
-	.rating		= 350,
-	.irq		= IRQ_CORETMR,
-#endif
-	.shift		= 32,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = bfin_timer_set_next_event,
-	.set_mode	= bfin_timer_set_mode,
-};
-
-static struct irqaction bfin_timer_irq = {
 #if defined(CONFIG_TICKSOURCE_GPTMR0)
-	.name		= "Blackfin GPTimer0",
-#else
-	.name		= "Blackfin CoreTimer",
-#endif
-	.flags		= IRQF_DISABLED | IRQF_TIMER | \
-			  IRQF_IRQPOLL | IRQF_PERCPU,
-	.handler	= timer_interrupt,
-	.dev_id		= &clockevent_bfin,
-};
-
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-static int bfin_timer_set_next_event(unsigned long cycles,
+static int bfin_gptmr0_set_next_event(unsigned long cycles,
                                      struct clock_event_device *evt)
 {
 	disable_gptimers(TIMER0bit);
@@ -196,7 +161,7 @@ static int bfin_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_timer_set_mode(enum clock_event_mode mode,
+static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
 	switch (mode) {
@@ -224,25 +189,65 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static void bfin_timer_ack(void)
+static void bfin_gptmr0_ack(void)
 {
 	set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0);
 }
 
-static void __init bfin_timer_init(void)
+static void __init bfin_gptmr0_init(void)
 {
 	disable_gptimers(TIMER0bit);
 }
 
-static unsigned long  __init bfin_clockevent_check(void)
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t bfin_gptmr0_interrupt(int irq, void *dev_id)
 {
-	setup_irq(IRQ_TIMER0, &bfin_timer_irq);
-	return get_sclk();
+	struct clock_event_device *evt = dev_id;
+	smp_mb();
+	evt->event_handler(evt);
+	bfin_gptmr0_ack();
+	return IRQ_HANDLED;
 }
 
-#else /* CONFIG_TICKSOURCE_CORETMR */
+static struct irqaction gptmr0_irq = {
+	.name		= "Blackfin GPTimer0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_gptmr0_interrupt,
+};
+
+static struct clock_event_device clockevent_gptmr0 = {
+	.name		= "bfin_gptimer0",
+	.rating		= 300,
+	.irq		= IRQ_TIMER0,
+	.shift		= 32,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = bfin_gptmr0_set_next_event,
+	.set_mode	= bfin_gptmr0_set_mode,
+};
 
-static int bfin_timer_set_next_event(unsigned long cycles,
+static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
+{
+	unsigned long clock_tick;
+
+	clock_tick = get_sclk();
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+
+	evt->cpumask = cpumask_of(0);
+
+	clockevents_register_device(evt);
+}
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+/* per-cpu local core timer */
+static DEFINE_PER_CPU(struct clock_event_device, coretmr_events);
+
+static int bfin_coretmr_set_next_event(unsigned long cycles,
 				struct clock_event_device *evt)
 {
 	bfin_write_TCNTL(TMPWR);
@@ -253,7 +258,7 @@ static int bfin_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_timer_set_mode(enum clock_event_mode mode,
+static void bfin_coretmr_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
 	switch (mode) {
@@ -285,19 +290,13 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static void bfin_timer_ack(void)
-{
-}
-
-static void __init bfin_timer_init(void)
+void bfin_coretmr_init(void)
 {
 	/* power up the timer, but don't enable it just yet */
 	bfin_write_TCNTL(TMPWR);
 	CSYNC();
 
-	/*
-	 * the TSCALE prescaler counter.
-	 */
+	/* the TSCALE prescaler counter. */
 	bfin_write_TSCALE(TIME_SCALE - 1);
 	bfin_write_TPERIOD(0);
 	bfin_write_TCOUNT(0);
@@ -305,52 +304,64 @@ static void __init bfin_timer_init(void)
 	CSYNC();
 }
 
-static unsigned long  __init bfin_clockevent_check(void)
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t bfin_coretmr_interrupt(int irq, void *dev_id)
 {
-	setup_irq(IRQ_CORETMR, &bfin_timer_irq);
-	return get_cclk() / TIME_SCALE;
-}
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
 
-void __init setup_core_timer(void)
-{
-	bfin_timer_init();
-	bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL);
-}
-#endif /* CONFIG_TICKSOURCE_GPTMR0 */
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
 	smp_mb();
 	evt->event_handler(evt);
-	bfin_timer_ack();
+
+	touch_nmi_watchdog();
+
 	return IRQ_HANDLED;
 }
 
-static int __init bfin_clockevent_init(void)
-{
-	unsigned long timer_clk;
-
-	timer_clk = bfin_clockevent_check();
+static struct irqaction coretmr_irq = {
+	.name		= "Blackfin CoreTimer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | \
+			  IRQF_IRQPOLL | IRQF_PERCPU,
+	.handler	= bfin_coretmr_interrupt,
+};
 
-	bfin_timer_init();
+void bfin_coretmr_clockevent_init(void)
+{
+	unsigned long clock_tick;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
+
+	evt->name = "bfin_core_timer";
+	evt->rating = 350;
+	evt->irq = -1;
+	evt->shift = 32;
+	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	evt->set_next_event = bfin_coretmr_set_next_event;
+	evt->set_mode = bfin_coretmr_set_mode;
+
+	clock_tick = get_cclk() / TIME_SCALE;
+	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(-1, evt);
+	evt->min_delta_ns = clockevent_delta2ns(100, evt);
+
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_register_device(evt);
+}
+#endif /* CONFIG_TICKSOURCE_CORETMR */
 
-	clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
-	clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
-	clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
-	clockevent_bfin.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_bfin);
 
-	return 0;
+void read_persistent_clock(struct timespec *ts)
+{
+	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
 }
 
 void __init time_init(void)
 {
-	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
 
 #ifdef CONFIG_RTC_DRV_BFIN
 	/* [#2663] hack to filter junk RTC values that would cause
@@ -363,12 +374,23 @@ void __init time_init(void)
 	}
 #endif
 
-	/* Initialize xtime. From now on, xtime is updated with timer interrupts */
-	xtime.tv_sec = secs_since_1970;
-	xtime.tv_nsec = 0;
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
-
 	bfin_cs_cycles_init();
 	bfin_cs_gptimer0_init();
-	bfin_clockevent_init();
+
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	setup_irq(IRQ_CORETMR, &coretmr_irq);
+	bfin_coretmr_clockevent_init();
+#endif
+
+#if defined(CONFIG_TICKSOURCE_GPTMR0)
+	bfin_gptmr0_init();
+	setup_irq(IRQ_TIMER0, &gptmr0_irq);
+	gptmr0_irq.dev_id = &clockevent_gptmr0;
+	bfin_gptmr0_clockevent_init(&clockevent_gptmr0);
+#endif
+
+#if !defined(CONFIG_TICKSOURCE_CORETMR) && !defined(CONFIG_TICKSOURCE_GPTMR0)
+# error at least one clock event device is required
+#endif
 }
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 13c1ee3..c911361 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -112,11 +112,6 @@ u32 arch_gettimeoffset(void)
 }
 #endif
 
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return 0;
-}
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -126,29 +121,8 @@ __attribute__((l1_text))
 #endif
 irqreturn_t timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update;
-
 	write_seqlock(&xtime_lock);
 	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / NSEC_PER_USEC) >=
-	    500000 - ((unsigned)TICK_SIZE) / 2
-	    && (xtime.tv_nsec / NSEC_PER_USEC) <=
-	    500000 + ((unsigned)TICK_SIZE) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* Do it again in 60s. */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
 	write_sequnlock(&xtime_lock);
 
 #ifdef CONFIG_IPIPE
@@ -161,10 +135,15 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
+}
 
+void __init time_init(void)
+{
 #ifdef CONFIG_RTC_DRV_BFIN
 	/* [#2663] hack to filter junk RTC values that would cause
 	 * userspace to have to deal with time values greater than
@@ -176,11 +155,5 @@ void __init time_init(void)
 	}
 #endif
 
-	/* Initialize xtime. From now on, xtime is updated with timer interrupts */
-	xtime.tv_sec = secs_since_1970;
-	xtime.tv_nsec = 0;
-
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
-
 	time_sched_init(timer_interrupt);
 }
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
new file mode 100644
index 0000000..59fcdf6
--- /dev/null
+++ b/arch/blackfin/kernel/trace.c
@@ -0,0 +1,981 @@
+/* provide some functions which dump the trace buffer, in a nice way for people
+ * to read it, and understand what is going on
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/dma.h>
+#include <asm/trace.h>
+#include <asm/fixed_code.h>
+#include <asm/traps.h>
+#include <asm/irq_handler.h>
+
+void decode_address(char *buf, unsigned long address)
+{
+	struct task_struct *p;
+	struct mm_struct *mm;
+	unsigned long flags, offset;
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+	struct rb_node *n;
+
+#ifdef CONFIG_KALLSYMS
+	unsigned long symsize;
+	const char *symname;
+	char *modname;
+	char *delim = ":";
+	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
+
+#ifdef CONFIG_KALLSYMS
+	/* look up the address and see if we are in kernel space */
+	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+	if (symname) {
+		/* yeah! kernel space! */
+		if (!modname)
+			modname = delim = "";
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+			delim, modname, delim, symname,
+			(unsigned long)offset);
+		return;
+	}
+#endif
+
+	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
+		return;
+
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
+		return;
+
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
+		return;
+
+	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
+		strcat(buf, "/* on-chip scratchpad */");
+		return;
+
+	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
+		strcat(buf, "/* unconnected memory */");
+		return;
+
+	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
+		strcat(buf, "/* reserved memory */");
+		return;
+
+	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank A */");
+		return;
+
+	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank B */");
+		return;
+	}
+
+	/*
+	 * Don't walk any of the vmas if we are oopsing, it has been known
+	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
+	 */
+	if (oops_in_progress) {
+		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+		return;
+	}
+
+	/* looks like we're off in user-land, so let's walk all the
+	 * mappings of all our processes and see if we can't be a whee
+	 * bit more specific
+	 */
+	write_lock_irqsave(&tasklist_lock, flags);
+	for_each_process(p) {
+		mm = (in_atomic ? p->mm : get_task_mm(p));
+		if (!mm)
+			continue;
+
+		if (!down_read_trylock(&mm->mmap_sem)) {
+			if (!in_atomic)
+				mmput(mm);
+			continue;
+		}
+
+		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
+			struct vm_area_struct *vma;
+
+			vma = rb_entry(n, struct vm_area_struct, vm_rb);
+
+			if (address >= vma->vm_start && address < vma->vm_end) {
+				char _tmpbuf[256];
+				char *name = p->comm;
+				struct file *file = vma->vm_file;
+
+				if (file) {
+					char *d_name = d_path(&file->f_path, _tmpbuf,
+						      sizeof(_tmpbuf));
+					if (!IS_ERR(d_name))
+						name = d_name;
+				}
+
+				/* FLAT does not have its text aligned to the start of
+				 * the map while FDPIC ELF does ...
+				 */
+
+				/* before we can check flat/fdpic, we need to
+				 * make sure current is valid
+				 */
+				if ((unsigned long)current >= FIXED_CODE_START &&
+				    !((unsigned long)current & 0x3)) {
+					if (current->mm &&
+					    (address > current->mm->start_code) &&
+					    (address < current->mm->end_code))
+						offset = address - current->mm->start_code;
+					else
+						offset = (address - vma->vm_start) +
+							 (vma->vm_pgoff << PAGE_SHIFT);
+
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
+				} else
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
+
+				up_read(&mm->mmap_sem);
+				if (!in_atomic)
+					mmput(mm);
+
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
+
+				goto done;
+			}
+		}
+
+		up_read(&mm->mmap_sem);
+		if (!in_atomic)
+			mmput(mm);
+	}
+
+	/*
+	 * we were unable to find this address anywhere,
+	 * or some MMs were skipped because they were in use.
+	 */
+	sprintf(buf, "/* kernel dynamic memory */");
+
+done:
+	write_unlock_irqrestore(&tasklist_lock, flags);
+}
+
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on success, false on bad address
+ */
+bool get_mem16(unsigned short *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	switch (bfin_mem_access_type(addr, 2)) {
+	case BFIN_MEM_ACCESS_CORE:
+	case BFIN_MEM_ACCESS_CORE_ONLY:
+		*val = *address;
+		return true;
+	case BFIN_MEM_ACCESS_DMA:
+		dma_memcpy(val, address, 2);
+		return true;
+	case BFIN_MEM_ACCESS_ITEST:
+		isram_memcpy(val, address, 2);
+		return true;
+	default: /* invalid access */
+		return false;
+	}
+}
+
+bool get_instruction(unsigned int *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+	unsigned short opcode0, opcode1;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
+		return false;
+
+	/* Scratchpad will never have instructions */
+	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+		return false;
+
+	/* Data banks will never have instructions */
+	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
+		return false;
+
+	if (!get_mem16(&opcode0, address))
+		return false;
+
+	/* was this a 32-bit instruction? If so, get the next 16 bits */
+	if ((opcode0 & 0xc000) == 0xc000) {
+		if (!get_mem16(&opcode1, address + 1))
+			return false;
+		*val = (opcode0 << 16) + opcode1;
+	} else
+		*val = opcode0;
+
+	return true;
+}
+
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * Decode the change of flow, and the common load/store instructions
+ * which are the main cause for faults, and discontinuities in the trace
+ * buffer.
+ */
+
+#define ProgCtrl_opcode         0x0000
+#define ProgCtrl_poprnd_bits    0
+#define ProgCtrl_poprnd_mask    0xf
+#define ProgCtrl_prgfunc_bits   4
+#define ProgCtrl_prgfunc_mask   0xf
+#define ProgCtrl_code_bits      8
+#define ProgCtrl_code_mask      0xff
+
+static void decode_ProgCtrl_0(unsigned int opcode)
+{
+	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
+	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
+
+	if (prgfunc == 0 && poprnd == 0)
+		pr_cont("NOP");
+	else if (prgfunc == 1 && poprnd == 0)
+		pr_cont("RTS");
+	else if (prgfunc == 1 && poprnd == 1)
+		pr_cont("RTI");
+	else if (prgfunc == 1 && poprnd == 2)
+		pr_cont("RTX");
+	else if (prgfunc == 1 && poprnd == 3)
+		pr_cont("RTN");
+	else if (prgfunc == 1 && poprnd == 4)
+		pr_cont("RTE");
+	else if (prgfunc == 2 && poprnd == 0)
+		pr_cont("IDLE");
+	else if (prgfunc == 2 && poprnd == 3)
+		pr_cont("CSYNC");
+	else if (prgfunc == 2 && poprnd == 4)
+		pr_cont("SSYNC");
+	else if (prgfunc == 2 && poprnd == 5)
+		pr_cont("EMUEXCPT");
+	else if (prgfunc == 3)
+		pr_cont("CLI R%i", poprnd);
+	else if (prgfunc == 4)
+		pr_cont("STI R%i", poprnd);
+	else if (prgfunc == 5)
+		pr_cont("JUMP (P%i)", poprnd);
+	else if (prgfunc == 6)
+		pr_cont("CALL (P%i)", poprnd);
+	else if (prgfunc == 7)
+		pr_cont("CALL (PC + P%i)", poprnd);
+	else if (prgfunc == 8)
+		pr_cont("JUMP (PC + P%i", poprnd);
+	else if (prgfunc == 9)
+		pr_cont("RAISE %i", poprnd);
+	else if (prgfunc == 10)
+		pr_cont("EXCPT %i", poprnd);
+	else
+		pr_cont("0x%04x", opcode);
+
+}
+
+#define BRCC_opcode             0x1000
+#define BRCC_offset_bits        0
+#define BRCC_offset_mask        0x3ff
+#define BRCC_B_bits             10
+#define BRCC_B_mask             0x1
+#define BRCC_T_bits             11
+#define BRCC_T_mask             0x1
+#define BRCC_code_bits          12
+#define BRCC_code_mask          0xf
+
+static void decode_BRCC_0(unsigned int opcode)
+{
+	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
+	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
+
+	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
+}
+
+#define CALLa_opcode    0xe2000000
+#define CALLa_addr_bits 0
+#define CALLa_addr_mask 0xffffff
+#define CALLa_S_bits    24
+#define CALLa_S_mask    0x1
+#define CALLa_code_bits 25
+#define CALLa_code_mask 0x7f
+
+static void decode_CALLa_0(unsigned int opcode)
+{
+	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
+
+	if (S)
+		pr_cont("CALL pcrel");
+	else
+		pr_cont("JUMP.L");
+}
+
+#define LoopSetup_opcode                0xe0800000
+#define LoopSetup_eoffset_bits          0
+#define LoopSetup_eoffset_mask          0x3ff
+#define LoopSetup_dontcare_bits         10
+#define LoopSetup_dontcare_mask         0x3
+#define LoopSetup_reg_bits              12
+#define LoopSetup_reg_mask              0xf
+#define LoopSetup_soffset_bits          16
+#define LoopSetup_soffset_mask          0xf
+#define LoopSetup_c_bits                20
+#define LoopSetup_c_mask                0x1
+#define LoopSetup_rop_bits              21
+#define LoopSetup_rop_mask              0x3
+#define LoopSetup_code_bits             23
+#define LoopSetup_code_mask             0x1ff
+
+static void decode_LoopSetup_0(unsigned int opcode)
+{
+	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask);
+	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
+	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
+
+	pr_cont("LSETUP <> LC%i", c);
+	if ((rop & 1) == 1)
+		pr_cont("= P%i", reg);
+	if ((rop & 2) == 2)
+		pr_cont(" >> 0x1");
+}
+
+#define DspLDST_opcode          0x9c00
+#define DspLDST_reg_bits        0
+#define DspLDST_reg_mask        0x7
+#define DspLDST_i_bits          3
+#define DspLDST_i_mask          0x3
+#define DspLDST_m_bits          5
+#define DspLDST_m_mask          0x3
+#define DspLDST_aop_bits        7
+#define DspLDST_aop_mask        0x3
+#define DspLDST_W_bits          9
+#define DspLDST_W_mask          0x1
+#define DspLDST_code_bits       10
+#define DspLDST_code_mask       0x3f
+
+static void decode_dspLDST_0(unsigned int opcode)
+{
+	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
+	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
+	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
+	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
+	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
+
+	if (W == 0) {
+		pr_cont("R%i", reg);
+		switch (m) {
+		case 0:
+			pr_cont(" = ");
+			break;
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+
+	pr_cont("[ I%i", i);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++ ]");
+		break;
+	case 1:
+		pr_cont("-- ]");
+		break;
+	}
+
+	if (W == 1) {
+		pr_cont(" = R%i", reg);
+		switch (m) {
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+}
+
+#define LDST_opcode             0x9000
+#define LDST_reg_bits           0
+#define LDST_reg_mask           0x7
+#define LDST_ptr_bits           3
+#define LDST_ptr_mask           0x7
+#define LDST_Z_bits             6
+#define LDST_Z_mask             0x1
+#define LDST_aop_bits           7
+#define LDST_aop_mask           0x3
+#define LDST_W_bits             9
+#define LDST_W_mask             0x1
+#define LDST_sz_bits            10
+#define LDST_sz_mask            0x3
+#define LDST_code_bits          12
+#define LDST_code_mask          0xf
+
+static void decode_LDST_0(unsigned int opcode)
+{
+	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
+	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask);
+	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
+	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
+	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
+	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	switch (sz) {
+	case 1:
+		pr_cont("W");
+		break;
+	case 2:
+		pr_cont("B");
+		break;
+	}
+
+	pr_cont("[P%i", ptr);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++");
+		break;
+	case 1:
+		pr_cont("--");
+		break;
+	}
+	pr_cont("]");
+
+	if (W == 1)
+		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	if (sz) {
+		if (Z)
+			pr_cont(" (X)");
+		else
+			pr_cont(" (Z)");
+	}
+}
+
+#define LDSTii_opcode           0xa000
+#define LDSTii_reg_bit          0
+#define LDSTii_reg_mask         0x7
+#define LDSTii_ptr_bit          3
+#define LDSTii_ptr_mask         0x7
+#define LDSTii_offset_bit       6
+#define LDSTii_offset_mask      0xf
+#define LDSTii_op_bit           10
+#define LDSTii_op_mask          0x3
+#define LDSTii_W_bit            12
+#define LDSTii_W_mask           0x1
+#define LDSTii_code_bit         13
+#define LDSTii_code_mask        0x7
+
+static void decode_LDSTii_0(unsigned int opcode)
+{
+	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
+	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
+	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
+	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
+	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
+
+	if (W == 0) {
+		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
+			op == 1 || op == 2 ? "" : "W", ptr, offset);
+		if (op == 2)
+			pr_cont("(Z)");
+		if (op == 3)
+			pr_cont("(X)");
+	} else {
+		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
+			offset, op == 3 ? "P" : "R", reg);
+	}
+}
+
+#define LDSTidxI_opcode         0xe4000000
+#define LDSTidxI_offset_bits    0
+#define LDSTidxI_offset_mask    0xffff
+#define LDSTidxI_reg_bits       16
+#define LDSTidxI_reg_mask       0x7
+#define LDSTidxI_ptr_bits       19
+#define LDSTidxI_ptr_mask       0x7
+#define LDSTidxI_sz_bits        22
+#define LDSTidxI_sz_mask        0x3
+#define LDSTidxI_Z_bits         24
+#define LDSTidxI_Z_mask         0x1
+#define LDSTidxI_W_bits         25
+#define LDSTidxI_W_mask         0x1
+#define LDSTidxI_code_bits      26
+#define LDSTidxI_code_mask      0x3f
+
+static void decode_LDSTidxI_0(unsigned int opcode)
+{
+	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask);
+	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask);
+	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask);
+	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask);
+	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask);
+	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
+
+	if (sz == 1)
+		pr_cont("W");
+	if (sz == 2)
+		pr_cont("B");
+
+	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
+		(offset & 0x1f) << 2);
+
+	if (W == 0 && sz != 0) {
+		if (Z)
+			pr_cont("(X)");
+		else
+			pr_cont("(Z)");
+	}
+
+	if (W == 1)
+		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+}
+
+static void decode_opcode(unsigned int opcode)
+{
+#ifdef CONFIG_BUG
+	if (opcode == BFIN_BUG_OPCODE)
+		pr_cont("BUG");
+	else
+#endif
+	if ((opcode & 0xffffff00) == ProgCtrl_opcode)
+		decode_ProgCtrl_0(opcode);
+	else if ((opcode & 0xfffff000) == BRCC_opcode)
+		decode_BRCC_0(opcode);
+	else if ((opcode & 0xfffff000) == 0x2000)
+		pr_cont("JUMP.S");
+	else if ((opcode & 0xfe000000) == CALLa_opcode)
+		decode_CALLa_0(opcode);
+	else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
+		decode_LoopSetup_0(opcode);
+	else if ((opcode & 0xfffffc00) == DspLDST_opcode)
+		decode_dspLDST_0(opcode);
+	else if ((opcode & 0xfffff000) == LDST_opcode)
+		decode_LDST_0(opcode);
+	else if ((opcode & 0xffffe000) == LDSTii_opcode)
+		decode_LDSTii_0(opcode);
+	else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
+		decode_LDSTidxI_0(opcode);
+	else if (opcode & 0xffff0000)
+		pr_cont("0x%08x", opcode);
+	else
+		pr_cont("0x%04x", opcode);
+}
+
+#define BIT_MULTI_INS 0x08000000
+static void decode_instruction(unsigned short *address)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, address))
+		return;
+
+	decode_opcode(opcode);
+
+	/* If things are a 32-bit instruction, it has the possibility of being
+	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
+	 * This test collidates with the unlink instruction, so disallow that
+	 */
+	if ((opcode & 0xc0000000) == 0xc0000000 &&
+	    (opcode & BIT_MULTI_INS) &&
+	    (opcode & 0xe8000000) != 0xe8000000) {
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 2))
+			return;
+		decode_opcode(opcode);
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 3))
+			return;
+		decode_opcode(opcode);
+	}
+}
+#endif
+
+void dump_bfin_trace_buffer(void)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags, i = 0, fault = 0;
+	char buf[150];
+	unsigned short *addr;
+	unsigned int cpu = raw_smp_processor_id();
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	int j, index;
+#endif
+
+	trace_buffer_save(tflags);
+
+	pr_notice("Hardware Trace:\n");
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
+	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("%4i Target : %s\n", i, buf);
+			/* Normally, the faulting instruction doesn't go into
+			 * the trace buffer, (since it doesn't commit), so
+			 * we print out the fault address here
+			 */
+			if (!fault && addr == ((unsigned short *)evt_ivhw)) {
+				addr = (unsigned short *)bfin_read_TBUF();
+				decode_address(buf, (unsigned long)addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction(addr);
+				pr_cont("\n");
+				fault = 1;
+				continue;
+			}
+			if (!fault && addr == (unsigned short *)trap &&
+				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
+				decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
+				pr_cont("\n");
+				fault = 1;
+			}
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("     Source : %s ", buf);
+			decode_instruction(addr);
+			pr_cont("\n");
+		}
+	}
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	if (trace_buff_offset)
+		index = trace_buff_offset / 4;
+	else
+		index = EXPAND_LEN;
+
+	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+	while (j) {
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("%4i Target : %s\n", i, buf);
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		pr_cont("\n");
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		j--;
+		i++;
+	}
+#endif
+
+	trace_buffer_restore(tflags);
+#endif
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+void dump_bfin_process(struct pt_regs *fp)
+{
+	/* We should be able to look at fp->ipend, but we don't push it on the
+	 * stack all the time, so do this until we fix that */
+	unsigned int context = bfin_read_IPEND();
+
+	if (oops_in_progress)
+		pr_emerg("Kernel OOPS in progress\n");
+
+	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
+		pr_notice("HW Error context\n");
+	else if (context & 0x0020)
+		pr_notice("Deferred Exception context\n");
+	else if (context & 0x3FC0)
+		pr_notice("Interrupt context\n");
+	else if (context & 0x4000)
+		pr_notice("Deferred Interrupt context\n");
+	else if (context & 0x8000)
+		pr_notice("Kernel process context\n");
+
+	/* Because we are crashing, and pointers could be bad, we check things
+	 * pretty closely before we use them
+	 */
+	if ((unsigned long)current >= FIXED_CODE_START &&
+	    !((unsigned long)current & 0x3) && current->pid) {
+		pr_notice("CURRENT PROCESS:\n");
+		if (current->comm >= (char *)FIXED_CODE_START)
+			pr_notice("COMM=%s PID=%d",
+				current->comm, current->pid);
+		else
+			pr_notice("COMM= invalid");
+
+		pr_cont("  CPU=%d\n", current_thread_info()->cpu);
+		if (!((unsigned long)current->mm & 0x3) &&
+			(unsigned long)current->mm >= FIXED_CODE_START) {
+			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
+				(void *)current->mm->start_code,
+				(void *)current->mm->end_code,
+				(void *)current->mm->start_data,
+				(void *)current->mm->end_data);
+			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
+				(void *)current->mm->end_data,
+				(void *)current->mm->brk,
+				(void *)current->mm->start_stack);
+		} else
+			pr_notice("invalid mm\n");
+	} else
+		pr_notice("No Valid process in current context\n");
+}
+
+void dump_bfin_mem(struct pt_regs *fp)
+{
+	unsigned short *addr, *erraddr, val = 0, err = 0;
+	char sti = 0, buf[6];
+
+	erraddr = (void *)fp->pc;
+
+	pr_notice("return address: [0x%p]; contents of:", erraddr);
+
+	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
+	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
+	     addr++) {
+		if (!((unsigned long)addr & 0xF))
+			pr_notice("0x%p: ", addr);
+
+		if (!get_mem16(&val, addr)) {
+				val = 0;
+				sprintf(buf, "????");
+		} else
+			sprintf(buf, "%04x", val);
+
+		if (addr == erraddr) {
+			pr_cont("[%s]", buf);
+			err = val;
+		} else
+			pr_cont(" %s ", buf);
+
+		/* Do any previous instructions turn on interrupts? */
+		if (addr <= erraddr &&				/* in the past */
+		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
+		      val == 0x017b))				/* [SP++] = RETI */
+			sti = 1;
+	}
+
+	pr_cont("\n");
+
+	/* Hardware error interrupts can be deferred */
+	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
+	    oops_in_progress)){
+		pr_notice("Looks like this was a deferred error - sorry\n");
+#ifndef CONFIG_DEBUG_HWERR
+		pr_notice("The remaining message may be meaningless\n");
+		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
+#else
+		/* If we are handling only one peripheral interrupt
+		 * and current mm and pid are valid, and the last error
+		 * was in that user space process's text area
+		 * print it out - because that is where the problem exists
+		 */
+		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
+		     (current->pid && current->mm)) {
+			/* And the last RETI points to the current userspace context */
+			if ((fp + 1)->pc >= current->mm->start_code &&
+			    (fp + 1)->pc <= current->mm->end_code) {
+				pr_notice("It might be better to look around here :\n");
+				pr_notice("-------------------------------------------\n");
+				show_regs(fp + 1);
+				pr_notice("-------------------------------------------\n");
+			}
+		}
+#endif
+	}
+}
+
+void show_regs(struct pt_regs *fp)
+{
+	char buf[150];
+	struct irqaction *action;
+	unsigned int i;
+	unsigned long flags = 0;
+	unsigned int cpu = raw_smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+
+	pr_notice("\n");
+	if (CPUID != bfin_cpuid())
+		pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	pr_notice("ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		pr_cont("(Detected 0.%d)", bfin_revid());
+
+	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	pr_notice("%s", linux_banner);
+
+	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		pr_notice("  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		pr_notice("  Kernel interrupts masked off\n");
+	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+		pr_notice("  HWERRCAUSE: 0x%lx\n",
+			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+		/* If the error was from the EBIU, print it out */
+		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+			pr_notice("  EBIU Error Reason  : 0x%04x\n",
+				bfin_read_EBIU_ERRMST());
+			pr_notice("  EBIU Error Address : 0x%08x\n",
+				bfin_read_EBIU_ERRADD());
+		}
+#endif
+	}
+	pr_notice("  EXCAUSE   : 0x%lx\n",
+		fp->seqstat & SEQSTAT_EXCAUSE);
+	for (i = 2; i <= 15 ; i++) {
+		if (fp->ipend & (1 << i)) {
+			if (i != 4) {
+				decode_address(buf, bfin_read32(EVT0 + 4*i));
+				pr_notice("  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				pr_notice("  interrupts disabled\n");
+		}
+	}
+
+	/* if no interrupts are going off, don't print this out */
+	if (fp->ipend & ~0x3F) {
+		for (i = 0; i < (NR_IRQS - 1); i++) {
+			if (!in_atomic)
+				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+			action = irq_desc[i].action;
+			if (!action)
+				goto unlock;
+
+			decode_address(buf, (unsigned int)action->handler);
+			pr_notice("  logical irq %3d mapped  : %s", i, buf);
+			for (action = action->next; action; action = action->next) {
+				decode_address(buf, (unsigned int)action->handler);
+				pr_cont(", %s", buf);
+			}
+			pr_cont("\n");
+unlock:
+			if (!in_atomic)
+				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+		}
+	}
+
+	decode_address(buf, fp->rete);
+	pr_notice(" RETE: %s\n", buf);
+	decode_address(buf, fp->retn);
+	pr_notice(" RETN: %s\n", buf);
+	decode_address(buf, fp->retx);
+	pr_notice(" RETX: %s\n", buf);
+	decode_address(buf, fp->rets);
+	pr_notice(" RETS: %s\n", buf);
+	decode_address(buf, fp->pc);
+	pr_notice(" PC  : %s\n", buf);
+
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
+	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
+		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
+	}
+
+	pr_notice("PROCESSOR STATE:\n");
+	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+		fp->r0, fp->r1, fp->r2, fp->r3);
+	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+		fp->r4, fp->r5, fp->r6, fp->r7);
+	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+		fp->p0, fp->p1, fp->p2, fp->p3);
+	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+		fp->p4, fp->p5, fp->fp, (long)fp);
+	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+		fp->lb0, fp->lt0, fp->lc0);
+	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+		fp->lb1, fp->lt1, fp->lc1);
+	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+		fp->b0, fp->l0, fp->m0, fp->i0);
+	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+		fp->b1, fp->l1, fp->m1, fp->i1);
+	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+		fp->b2, fp->l2, fp->m2, fp->i2);
+	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+		fp->b3, fp->l3, fp->m3, fp->i3);
+	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	pr_notice("USP : %08lx  ASTAT: %08lx\n",
+		rdusp(), fp->astat);
+
+	pr_notice("\n");
+}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index d3cbcd6..59c1df7 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -1,25 +1,22 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Main exception handling logic.
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
 
 #include <linux/bug.h>
 #include <linux/uaccess.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/fs.h>
-#include <linux/rbtree.h>
 #include <asm/traps.h>
-#include <asm/cacheflush.h>
 #include <asm/cplb.h>
-#include <asm/dma.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
+#include <asm/pseudo_instructions.h>
 
 #ifdef CONFIG_KGDB
 # include <linux/kgdb.h>
@@ -62,182 +59,6 @@ void __init trap_init(void)
 	CSYNC();
 }
 
-static void decode_address(char *buf, unsigned long address)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	struct task_struct *p;
-	struct mm_struct *mm;
-	unsigned long flags, offset;
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-	struct rb_node *n;
-
-#ifdef CONFIG_KALLSYMS
-	unsigned long symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
-#endif
-
-	buf += sprintf(buf, "<0x%08lx> ", address);
-
-#ifdef CONFIG_KALLSYMS
-	/* look up the address and see if we are in kernel space */
-	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
-
-	if (symname) {
-		/* yeah! kernel space! */
-		if (!modname)
-			modname = delim = "";
-		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
-		        delim, modname, delim, symname,
-		        (unsigned long)offset);
-		return;
-	}
-#endif
-
-	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		/* Problem in fixed code section? */
-		strcat(buf, "/* Maybe fixed code section */");
-		return;
-
-	} else if (address < CONFIG_BOOT_LOAD) {
-		/* Problem somewhere before the kernel start address */
-		strcat(buf, "/* Maybe null pointer? */");
-		return;
-
-	} else if (address >= COREMMR_BASE) {
-		strcat(buf, "/* core mmrs */");
-		return;
-
-	} else if (address >= SYSMMR_BASE) {
-		strcat(buf, "/* system mmrs */");
-		return;
-
-	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
-		strcat(buf, "/* on-chip L1 ROM */");
-		return;
-	}
-
-	/*
-	 * Don't walk any of the vmas if we are oopsing, it has been known
-	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
-	 */
-	if (oops_in_progress) {
-		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
-		return;
-	}
-
-	/* looks like we're off in user-land, so let's walk all the
-	 * mappings of all our processes and see if we can't be a whee
-	 * bit more specific
-	 */
-	write_lock_irqsave(&tasklist_lock, flags);
-	for_each_process(p) {
-		mm = (in_atomic ? p->mm : get_task_mm(p));
-		if (!mm)
-			continue;
-
-		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
-			struct vm_area_struct *vma;
-
-			vma = rb_entry(n, struct vm_area_struct, vm_rb);
-
-			if (address >= vma->vm_start && address < vma->vm_end) {
-				char _tmpbuf[256];
-				char *name = p->comm;
-				struct file *file = vma->vm_file;
-
-				if (file) {
-					char *d_name = d_path(&file->f_path, _tmpbuf,
-						      sizeof(_tmpbuf));
-					if (!IS_ERR(d_name))
-						name = d_name;
-				}
-
-				/* FLAT does not have its text aligned to the start of
-				 * the map while FDPIC ELF does ...
-				 */
-
-				/* before we can check flat/fdpic, we need to
-				 * make sure current is valid
-				 */
-				if ((unsigned long)current >= FIXED_CODE_START &&
-				    !((unsigned long)current & 0x3)) {
-					if (current->mm &&
-					    (address > current->mm->start_code) &&
-					    (address < current->mm->end_code))
-						offset = address - current->mm->start_code;
-					else
-						offset = (address - vma->vm_start) +
-							 (vma->vm_pgoff << PAGE_SHIFT);
-
-					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
-				} else
-					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
-						name, vma->vm_start, vma->vm_end);
-
-				if (!in_atomic)
-					mmput(mm);
-
-				if (buf[0] == '\0')
-					sprintf(buf, "[ %s ] dynamic memory", name);
-
-				goto done;
-			}
-		}
-		if (!in_atomic)
-			mmput(mm);
-	}
-
-	/* we were unable to find this address anywhere */
-	sprintf(buf, "/* kernel dynamic memory */");
-
-done:
-	write_unlock_irqrestore(&tasklist_lock, flags);
-#else
-	sprintf(buf, " ");
-#endif
-}
-
-asmlinkage void double_fault_c(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int j;
-	trace_buffer_save(j);
-#endif
-
-	console_verbose();
-	oops_in_progress = 1;
-#ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "Double Fault\n");
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = raw_smp_processor_id();
-		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx_doublefault);
-		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
-		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
-		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
-
-		decode_address(buf, fp->retx);
-		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
-	} else
-#endif
-	{
-		dump_bfin_process(fp);
-		dump_bfin_mem(fp);
-		show_regs(fp);
-		dump_bfin_trace_buffer();
-	}
-#endif
-	panic("Double Fault - unrecoverable event");
-
-}
-
 static int kernel_mode_regs(struct pt_regs *regs)
 {
 	return regs->ipend & 0xffc0;
@@ -248,9 +69,10 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
 #endif
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-	unsigned int cpu = raw_smp_processor_id();
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+	int opcode;
 #endif
+	unsigned int cpu = raw_smp_processor_id();
 	const char *strerror = NULL;
 	int sig = 0;
 	siginfo_t info;
@@ -382,6 +204,19 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 			}
 		}
 #endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+		/*
+		 * Support for the fake instructions, if the instruction fails,
+		 * then just execute a illegal opcode failure (like normal).
+		 * Don't support these instructions inside the kernel
+		 */
+		if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
+			if (execute_pseudodbg_assert(fp, opcode))
+				goto traps_done;
+			if (execute_pseudodbg(fp, opcode))
+				goto traps_done;
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
 		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
@@ -639,7 +474,17 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	{
 		info.si_signo = sig;
 		info.si_errno = 0;
-		info.si_addr = (void __user *)fp->pc;
+		switch (trapnr) {
+		case VEC_CPLB_VL:
+		case VEC_MISALI_D:
+		case VEC_CPLB_M:
+		case VEC_CPLB_MHIT:
+			info.si_addr = (void __user *)cpu_pda[cpu].dcplb_fault_addr;
+			break;
+		default:
+			info.si_addr = (void __user *)fp->pc;
+			break;
+		}
 		force_sig_info(sig, &info, current);
 	}
 
@@ -652,659 +497,44 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	trace_buffer_restore(j);
 }
 
-/* Typical exception handling routines	*/
-
-#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
-
-/*
- * Similar to get_user, do some address checking, then dereference
- * Return true on success, false on bad address
- */
-static bool get_instruction(unsigned short *val, unsigned short *address)
-{
-	unsigned long addr = (unsigned long)address;
-
-	/* Check for odd addresses */
-	if (addr & 0x1)
-		return false;
-
-	/* MMR region will never have instructions */
-	if (addr >= SYSMMR_BASE)
-		return false;
-
-	switch (bfin_mem_access_type(addr, 2)) {
-		case BFIN_MEM_ACCESS_CORE:
-		case BFIN_MEM_ACCESS_CORE_ONLY:
-			*val = *address;
-			return true;
-		case BFIN_MEM_ACCESS_DMA:
-			dma_memcpy(val, address, 2);
-			return true;
-		case BFIN_MEM_ACCESS_ITEST:
-			isram_memcpy(val, address, 2);
-			return true;
-		default: /* invalid access */
-			return false;
-	}
-}
-
-/*
- * decode the instruction if we are printing out the trace, as it
- * makes things easier to follow, without running it through objdump
- * These are the normal instructions which cause change of flow, which
- * would be at the source of the trace buffer
- */
-#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
-static void decode_instruction(unsigned short *address)
-{
-	unsigned short opcode;
-
-	if (get_instruction(&opcode, address)) {
-		if (opcode == 0x0010)
-			verbose_printk("RTS");
-		else if (opcode == 0x0011)
-			verbose_printk("RTI");
-		else if (opcode == 0x0012)
-			verbose_printk("RTX");
-		else if (opcode == 0x0013)
-			verbose_printk("RTN");
-		else if (opcode == 0x0014)
-			verbose_printk("RTE");
-		else if (opcode == 0x0025)
-			verbose_printk("EMUEXCPT");
-		else if (opcode == 0x0040 && opcode <= 0x0047)
-			verbose_printk("STI R%i", opcode & 7);
-		else if (opcode >= 0x0050 && opcode <= 0x0057)
-			verbose_printk("JUMP (P%i)", opcode & 7);
-		else if (opcode >= 0x0060 && opcode <= 0x0067)
-			verbose_printk("CALL (P%i)", opcode & 7);
-		else if (opcode >= 0x0070 && opcode <= 0x0077)
-			verbose_printk("CALL (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0080 && opcode <= 0x0087)
-			verbose_printk("JUMP (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0090 && opcode <= 0x009F)
-			verbose_printk("RAISE 0x%x", opcode & 0xF);
-		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
-			verbose_printk("EXCPT 0x%x", opcode & 0xF);
-		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
-			verbose_printk("IF !CC JUMP");
-		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
-			verbose_printk("IF CC JUMP");
-		else if (opcode >= 0x2000 && opcode <= 0x2fff)
-			verbose_printk("JUMP.S");
-		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
-			verbose_printk("LSETUP");
-		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
-			verbose_printk("JUMP.L");
-		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
-			verbose_printk("CALL pcrel");
-		else
-			verbose_printk("0x%04x", opcode);
-	}
-
-}
-#endif
-
-void dump_bfin_trace_buffer(void)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags, i = 0;
-	char buf[150];
-	unsigned short *addr;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	int j, index;
-#endif
-
-	trace_buffer_save(tflags);
-
-	printk(KERN_NOTICE "Hardware Trace:\n");
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
-#endif
-
-	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
-		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			addr = (unsigned short *)bfin_read_TBUF();
-			decode_address(buf, (unsigned long)addr);
-			printk(KERN_NOTICE "     Source : %s ", buf);
-			decode_instruction(addr);
-			printk("\n");
-		}
-	}
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	if (trace_buff_offset)
-		index = trace_buff_offset / 4;
-	else
-		index = EXPAND_LEN;
-
-	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
-	while (j) {
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-		index -= 1;
-		if (index < 0 )
-			index = EXPAND_LEN;
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s ", buf);
-		decode_instruction((unsigned short *)software_trace_buff[index]);
-		printk("\n");
-		index -= 1;
-		if (index < 0)
-			index = EXPAND_LEN;
-		j--;
-		i++;
-	}
-#endif
-
-	trace_buffer_restore(tflags);
-#endif
-#endif
-}
-EXPORT_SYMBOL(dump_bfin_trace_buffer);
-
-#ifdef CONFIG_BUG
-int is_valid_bugaddr(unsigned long addr)
-{
-	unsigned short opcode;
-
-	if (!get_instruction(&opcode, (unsigned short *)addr))
-		return 0;
-
-	return opcode == BFIN_BUG_OPCODE;
-}
-#endif
-
-/*
- * Checks to see if the address pointed to is either a
- * 16-bit CALL instruction, or a 32-bit CALL instruction
- */
-static bool is_bfin_call(unsigned short *addr)
-{
-	unsigned short opcode = 0, *ins_addr;
-	ins_addr = (unsigned short *)addr;
-
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
-	    (opcode >= 0x0070 && opcode <= 0x0077))
-		return true;
-
-	ins_addr--;
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if (opcode >= 0xE300 && opcode <= 0xE3FF)
-		return true;
-
-	return false;
-
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-#ifdef CONFIG_PRINTK
-	unsigned int *addr, *endstack, *fp = 0, *frame;
-	unsigned short *ins_addr;
-	char buf[150];
-	unsigned int i, j, ret_addr, frame_no = 0;
-
-	/*
-	 * If we have been passed a specific stack, use that one otherwise
-	 *    if we have been passed a task structure, use that, otherwise
-	 *    use the stack of where the variable "stack" exists
-	 */
-
-	if (stack == NULL) {
-		if (task) {
-			/* We know this is a kernel stack, so this is the start/end */
-			stack = (unsigned long *)task->thread.ksp;
-			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
-		} else {
-			/* print out the existing stack info */
-			stack = (unsigned long *)&stack;
-			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-		}
-	} else
-		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-
-	printk(KERN_NOTICE "Stack info:\n");
-	decode_address(buf, (unsigned int)stack);
-	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
-
-	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
-		printk(KERN_NOTICE "Invalid stack pointer\n");
-		return;
-	}
-
-	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
-		if (*addr & 0x1)
-			continue;
-		ins_addr = (unsigned short *)*addr;
-		ins_addr--;
-		if (is_bfin_call(ins_addr))
-			fp = addr - 1;
-
-		if (fp) {
-			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack
-			       && fp && ((unsigned int) fp & 0x3) == 0)
-				fp = (unsigned int *)*fp;
-			if (fp == 0 || fp == endstack) {
-				fp = addr - 1;
-				break;
-			}
-			fp = 0;
-		}
-	}
-	if (fp) {
-		frame = fp;
-		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
-	} else
-		frame = 0;
-
-	/*
-	 * Now that we think we know where things are, we
-	 * walk the stack again, this time printing things out
-	 * incase there is no frame pointer, we still look for
-	 * valid return addresses
-	 */
-
-	/* First time print out data, next time, print out symbols */
-	for (j = 0; j <= 1; j++) {
-		if (j)
-			printk(KERN_NOTICE "Return addresses in stack:\n");
-		else
-			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
-
-		fp = frame;
-		frame_no = 0;
-
-		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr < endstack; addr++, i++) {
-
-			ret_addr = 0;
-			if (!j && i % 8 == 0)
-				printk(KERN_NOTICE "%p:",addr);
-
-			/* if it is an odd address, or zero, just skip it */
-			if (*addr & 0x1 || !*addr)
-				goto print;
-
-			ins_addr = (unsigned short *)*addr;
-
-			/* Go back one instruction, and see if it is a CALL */
-			ins_addr--;
-			ret_addr = is_bfin_call(ins_addr);
- print:
-			if (!j && stack == (unsigned long *)addr)
-				printk("[%08x]", *addr);
-			else if (ret_addr)
-				if (j) {
-					decode_address(buf, (unsigned int)*addr);
-					if (frame == addr) {
-						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
-						continue;
-					}
-					printk(KERN_NOTICE "    address : %s\n", buf);
-				} else
-					printk("<%08x>", *addr);
-			else if (fp == addr) {
-				if (j)
-					frame = addr+1;
-				else
-					printk("(%08x)", *addr);
-
-				fp = (unsigned int *)*addr;
-				frame_no++;
-
-			} else if (!j)
-				printk(" %08x ", *addr);
-		}
-		if (!j)
-			printk("\n");
-	}
-#endif
-}
-EXPORT_SYMBOL(show_stack);
-
-void dump_stack(void)
+asmlinkage void double_fault_c(struct pt_regs *fp)
 {
-	unsigned long stack;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags;
+	int j;
+	trace_buffer_save(j);
 #endif
-	trace_buffer_save(tflags);
-	dump_bfin_trace_buffer();
-	show_stack(current, &stack);
-	trace_buffer_restore(tflags);
-}
-EXPORT_SYMBOL(dump_stack);
 
-void dump_bfin_process(struct pt_regs *fp)
-{
+	console_verbose();
+	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	/* We should be able to look at fp->ipend, but we don't push it on the
-	 * stack all the time, so do this until we fix that */
-	unsigned int context = bfin_read_IPEND();
-
-	if (oops_in_progress)
-		verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
-
-	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-		verbose_printk(KERN_NOTICE "HW Error context\n");
-	else if (context & 0x0020)
-		verbose_printk(KERN_NOTICE "Deferred Exception context\n");
-	else if (context & 0x3FC0)
-		verbose_printk(KERN_NOTICE "Interrupt context\n");
-	else if (context & 0x4000)
-		verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
-	else if (context & 0x8000)
-		verbose_printk(KERN_NOTICE "Kernel process context\n");
-
-	/* Because we are crashing, and pointers could be bad, we check things
-	 * pretty closely before we use them
-	 */
-	if ((unsigned long)current >= FIXED_CODE_START &&
-	    !((unsigned long)current & 0x3) && current->pid) {
-		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
-		if (current->comm >= (char *)FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
-				current->comm, current->pid);
-		else
-			verbose_printk(KERN_NOTICE "COMM= invalid");
+	printk(KERN_EMERG "Double Fault\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		unsigned int cpu = raw_smp_processor_id();
+		char buf[150];
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
 
-		printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
-		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE
-				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
-				(void *)current->mm->start_code,
-				(void *)current->mm->end_code,
-				(void *)current->mm->start_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->brk,
-				(void *)current->mm->start_stack);
-		else
-			verbose_printk(KERN_NOTICE "invalid mm\n");
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
 	} else
-		verbose_printk(KERN_NOTICE
-			       "No Valid process in current context\n");
-#endif
-}
-
-void dump_bfin_mem(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	unsigned short *addr, *erraddr, val = 0, err = 0;
-	char sti = 0, buf[6];
-
-	erraddr = (void *)fp->pc;
-
-	verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
-
-	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
-	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
-	     addr++) {
-		if (!((unsigned long)addr & 0xF))
-			verbose_printk(KERN_NOTICE "0x%p: ", addr);
-
-		if (!get_instruction(&val, addr)) {
-				val = 0;
-				sprintf(buf, "????");
-		} else
-			sprintf(buf, "%04x", val);
-
-		if (addr == erraddr) {
-			verbose_printk("[%s]", buf);
-			err = val;
-		} else
-			verbose_printk(" %s ", buf);
-
-		/* Do any previous instructions turn on interrupts? */
-		if (addr <= erraddr &&				/* in the past */
-		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
-		      val == 0x017b))				/* [SP++] = RETI */
-			sti = 1;
-	}
-
-	verbose_printk("\n");
-
-	/* Hardware error interrupts can be deferred */
-	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
-	    oops_in_progress)){
-		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
-#ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE
-"The remaining message may be meaningless\n"
-"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
-#else
-		/* If we are handling only one peripheral interrupt
-		 * and current mm and pid are valid, and the last error
-		 * was in that user space process's text area
-		 * print it out - because that is where the problem exists
-		 */
-		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
-		     (current->pid && current->mm)) {
-			/* And the last RETI points to the current userspace context */
-			if ((fp + 1)->pc >= current->mm->start_code &&
-			    (fp + 1)->pc <= current->mm->end_code) {
-				verbose_printk(KERN_NOTICE "It might be better to look around here : \n");
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-				show_regs(fp + 1);
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-			}
-		}
-#endif
-	}
-#endif
-}
-
-void show_regs(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	char buf [150];
-	struct irqaction *action;
-	unsigned int i;
-	unsigned long flags = 0;
-	unsigned int cpu = raw_smp_processor_id();
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-
-	verbose_printk(KERN_NOTICE "\n");
-	if (CPUID != bfin_cpuid())
-		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
-			"but running on:0x%04x (Rev %d)\n",
-			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
-
-	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
-		CPU, bfin_compiled_revid());
-
-	if (bfin_compiled_revid() !=  bfin_revid())
-		verbose_printk("(Detected 0.%d)", bfin_revid());
-
-	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
-		get_cclk()/1000000, get_sclk()/1000000,
-#ifdef CONFIG_MPU
-		"mpu on"
-#else
-		"mpu off"
-#endif
-		);
-
-	verbose_printk(KERN_NOTICE "%s", linux_banner);
-
-	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
-	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
-	if (fp->ipend & EVT_IRPTEN)
-		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
-			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
-		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
-		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
-	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
-		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
-			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
-#ifdef EBIU_ERRMST
-		/* If the error was from the EBIU, print it out */
-		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
-			verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
-				bfin_read_EBIU_ERRMST());
-			verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
-				bfin_read_EBIU_ERRADD());
-		}
 #endif
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
-	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
-		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 2; i <= 15 ; i++) {
-		if (fp->ipend & (1 << i)) {
-			if (i != 4) {
-				decode_address(buf, bfin_read32(EVT0 + 4*i));
-				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
-			} else
-				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
-		}
-	}
-
-	/* if no interrupts are going off, don't print this out */
-	if (fp->ipend & ~0x3F) {
-		for (i = 0; i < (NR_IRQS - 1); i++) {
-			if (!in_atomic)
-				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-
-			action = irq_desc[i].action;
-			if (!action)
-				goto unlock;
-
-			decode_address(buf, (unsigned int)action->handler);
-			verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
-			for (action = action->next; action; action = action->next) {
-				decode_address(buf, (unsigned int)action->handler);
-				verbose_printk(", %s", buf);
-			}
-			verbose_printk("\n");
-unlock:
-			if (!in_atomic)
-				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-		}
-	}
-
-	decode_address(buf, fp->rete);
-	verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
-	decode_address(buf, fp->retn);
-	verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
-	decode_address(buf, fp->retx);
-	verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
-	decode_address(buf, fp->rets);
-	verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
-	decode_address(buf, fp->pc);
-	verbose_printk(KERN_NOTICE " PC  : %s\n", buf);
-
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
-	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
-		verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
-	}
-
-	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
-	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
-		fp->r0, fp->r1, fp->r2, fp->r3);
-	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
-		fp->r4, fp->r5, fp->r6, fp->r7);
-	verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
-		fp->p0, fp->p1, fp->p2, fp->p3);
-	verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
-		fp->p4, fp->p5, fp->fp, (long)fp);
-	verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
-		fp->lb0, fp->lt0, fp->lc0);
-	verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
-		fp->lb1, fp->lt1, fp->lc1);
-	verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
-		fp->b0, fp->l0, fp->m0, fp->i0);
-	verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
-		fp->b1, fp->l1, fp->m1, fp->i1);
-	verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
-		fp->b2, fp->l2, fp->m2, fp->i2);
-	verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
-		fp->b3, fp->l3, fp->m3, fp->i3);
-	verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
-
-	verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
-		rdusp(), fp->astat);
-
-	verbose_printk(KERN_NOTICE "\n");
 #endif
-}
-
-#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
-asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
-#endif
-
-static DEFINE_SPINLOCK(bfin_spinlock_lock);
-
-asmlinkage int sys_bfin_spinlock(int *p)
-{
-	int ret, tmp = 0;
-
-	spin_lock(&bfin_spinlock_lock);	/* This would also hold kernel preemption. */
-	ret = get_user(tmp, p);
-	if (likely(ret == 0)) {
-		if (unlikely(tmp))
-			ret = 1;
-		else
-			put_user(1, p);
-	}
-	spin_unlock(&bfin_spinlock_lock);
-	return ret;
-}
-
-int bfin_request_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
-
-	if (curr_handler != ex_replaceable)
-		return -EBUSY;
-
-	ex_table[exception] = handler;
+	panic("Double Fault - unrecoverable event");
 
-	return 0;
 }
-EXPORT_SYMBOL(bfin_request_exception);
-
-int bfin_free_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
 
-	if (curr_handler != handler)
-		return -EBUSY;
-
-	ex_table[exception] = ex_replaceable;
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_free_exception);
 
 void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 {
@@ -1329,3 +559,23 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 	dump_stack();
 	panic("Unrecoverable event");
 }
+
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
+/* stub this out */
+#ifndef CONFIG_DEBUG_VERBOSE
+void show_regs(struct pt_regs *fp)
+{
+
+}
+#endif
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 66799e7..984c781 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -15,7 +15,12 @@ _jiffies = _jiffies_64;
 
 SECTIONS
 {
+#ifdef CONFIG_RAMKERNEL
 	. = CONFIG_BOOT_LOAD;
+#else
+	. = CONFIG_ROM_BASE;
+#endif
+
 	/* Neither the text, ro_data or bss section need to be aligned
 	 * So pack them back to back
 	 */
@@ -31,6 +36,12 @@ SECTIONS
 		LOCK_TEXT
 		IRQENTRY_TEXT
 		KPROBES_TEXT
+#ifdef CONFIG_ROMKERNEL
+		__sinittext = .;
+		INIT_TEXT
+		__einittext = .;
+		EXIT_TEXT
+#endif
 		*(.text.*)
 		*(.fixup)
 
@@ -50,8 +61,14 @@ SECTIONS
 
 	/* Just in case the first read only is a 32-bit access */
 	RO_DATA(4)
+	__rodata_end = .;
 
+#ifdef CONFIG_ROMKERNEL
+	. = CONFIG_BOOT_LOAD;
+	.bss : AT(__rodata_end)
+#else
 	.bss :
+#endif
 	{
 		. = ALIGN(4);
 		___bss_start = .;
@@ -67,7 +84,11 @@ SECTIONS
 		___bss_stop = .;
 	}
 
+#if defined(CONFIG_ROMKERNEL)
+	.data : AT(LOADADDR(.bss) + SIZEOF(.bss))
+#else
 	.data :
+#endif
 	{
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
@@ -94,6 +115,8 @@ SECTIONS
 
 		__edata = .;
 	}
+	__data_lma = LOADADDR(.data);
+	__data_len = SIZEOF(.data);
 
 	/* The init section should be last, so when we free it, it goes into
 	 * the general memory pool, and (hopefully) will decrease fragmentation
@@ -103,25 +126,58 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
+#ifdef CONFIG_RAMKERNEL
 	INIT_TEXT_SECTION(PAGE_SIZE)
-	. = ALIGN(16);
-	INIT_DATA_SECTION(16)
-	PERCPU(4)
 
-	/* we have to discard exit text and such at runtime, not link time, to
+	/* We have to discard exit text and such at runtime, not link time, to
 	 * handle embedded cross-section references (alt instructions, bug
-	 * table, eh_frame, etc...)
+	 * table, eh_frame, etc...).  We need all of our .text up front and
+	 * .data after it for PCREL call issues.
 	 */
 	.exit.text :
 	{
 		EXIT_TEXT
 	}
+
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
+	PERCPU(4)
+
 	.exit.data :
 	{
 		EXIT_DATA
 	}
 
 	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
+#else
+	.init.data : AT(__data_lma + __data_len)
+	{
+		__sinitdata = .;
+		INIT_DATA
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
+		. = ALIGN(4);
+		___per_cpu_load = .;
+		___per_cpu_start = .;
+		*(.data.percpu.first)
+		*(.data.percpu.page_aligned)
+		*(.data.percpu)
+		*(.data.percpu.shared_aligned)
+		___per_cpu_end = .;
+
+		EXIT_DATA
+		__einitdata = .;
+	}
+	__init_data_lma = LOADADDR(.init.data);
+	__init_data_len = SIZEOF(.init.data);
+	__init_data_end = .;
+
+	.text_l1 L1_CODE_START : AT(__init_data_lma + __init_data_len)
+#endif
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
@@ -202,7 +258,11 @@ SECTIONS
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
+#ifdef CONFIG_RAMKERNEL
 	. = __l2_lma + __l2_len;
+#else
+	. = __init_data_end;
+#endif
 	. = ALIGN(PAGE_SIZE);
 	___init_end = .;
 
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
index c30d99b..eab1bef 100644
--- a/arch/blackfin/lib/memset.S
+++ b/arch/blackfin/lib/memset.S
@@ -20,6 +20,7 @@
  * R1 = filler byte
  * R2 = count
  * Favours word aligned data.
+ * The strncpy assumes that I0 and I1 are not used in this function
  */
 
 ENTRY(_memset)
diff --git a/arch/blackfin/lib/strcmp.S b/arch/blackfin/lib/strcmp.S
new file mode 100644
index 0000000..d7c1d15
--- /dev/null
+++ b/arch/blackfin/lib/strcmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcmp(char *s1, const char *s2);
+ * R0 = address (s1)
+ * R1 = address (s2)
+ *
+ * Returns an integer less than, equal to, or greater than zero if s1
+ *  (or the first n  bytes thereof) is found, respectively, to be less
+ *  than, to match, or be greater than s2.
+ */
+
+#ifdef CONFIG_STRCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcmp)
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 2f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if cc jump 1b (bp);    /* no, keep going */
+	jump.s 3f;             /* strings are equal */
+2:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+3:
+	RTS;
+
+ENDPROC(_strcmp)
diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c
deleted file mode 100644
index fde39a1..0000000
--- a/arch/blackfin/lib/strcmp.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcmp __inline_strcmp
-#include <asm/string.h>
-#undef strcmp
-
-#include <linux/module.h>
-
-int strcmp(const char *dest, const char *src)
-{
-	return __inline_strcmp(dest, src);
-}
-EXPORT_SYMBOL(strcmp);
diff --git a/arch/blackfin/lib/strcpy.S b/arch/blackfin/lib/strcpy.S
new file mode 100644
index 0000000..a6a0c63
--- /dev/null
+++ b/arch/blackfin/lib/strcpy.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcpy(char *dest, const char *src);
+ * R0 = address (dest)
+ * R1 = address (src)
+ *
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcpy)
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1;
+	if cc jump 1b (bp);
+	RTS;
+
+ENDPROC(_strcpy)
diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c
deleted file mode 100644
index 2a8836b..0000000
--- a/arch/blackfin/lib/strcpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcpy __inline_strcpy
-#include <asm/string.h>
-#undef strcpy
-
-#include <linux/module.h>
-
-char *strcpy(char *dest, const char *src)
-{
-	return __inline_strcpy(dest, src);
-}
-EXPORT_SYMBOL(strcpy);
diff --git a/arch/blackfin/lib/strncmp.S b/arch/blackfin/lib/strncmp.S
new file mode 100644
index 0000000..6da37c3
--- /dev/null
+++ b/arch/blackfin/lib/strncmp.S
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strncpy(char *s1, const char *s2, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size (n)
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRNCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncmp)
+	CC = R2 == 0;
+	if CC JUMP 5f;
+
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 3f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if ! cc jump 4f;       /* yes, all done */
+	R2 += -1;              /* no, adjust count */
+	CC = R2 == 0;
+	if ! cc jump 1b (bp);  /* more to do, keep going */
+2:
+	R0 = 0;                /* strings are equal */
+	jump.s 4f;
+3:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+4:
+	RTS;
+
+5:
+	R0 = 0;
+	RTS;
+
+ENDPROC(_strncmp)
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
deleted file mode 100644
index 46518b1..0000000
--- a/arch/blackfin/lib/strncmp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncmp __inline_strncmp
-#include <asm/string.h>
-#include <linux/module.h>
-#undef strncmp
-
-int strncmp(const char *cs, const char *ct, size_t count)
-{
-	return __inline_strncmp(cs, ct, count);
-}
-EXPORT_SYMBOL(strncmp);
diff --git a/arch/blackfin/lib/strncpy.S b/arch/blackfin/lib/strncpy.S
new file mode 100644
index 0000000..f3931d5
--- /dev/null
+++ b/arch/blackfin/lib/strncpy.S
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+#include <asm/context.S>
+
+/* void *strncpy(char *dest, const char *src, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size
+ * Returns a pointer (R0) to the destination string dest
+ *  we do this by not changing R0
+ */
+
+#ifdef CONFIG_STRNCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncpy)
+	CC = R2 == 0;
+	if CC JUMP 4f;
+
+	P2 = R2 ;       /* size */
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+	LSETUP (1f, 2f) LC0 = P2;
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1 == 0;
+2:
+	if CC jump 3f;
+
+	RTS;
+
+	/* if src is shorter than n, we need to null pad bytes in dest
+	 * but, we can get here when the last byte is zero, and we don't
+	 * want to copy an extra byte at the end, so we need to check
+	 */
+3:
+	R2 = LC0;
+	CC = R2
+	if ! CC jump 6f;
+
+	/* if the required null padded portion is small, do it here, rather than
+	 * handling the overhead of memset (which is OK when things are big).
+	 */
+	R3 = 0x20;
+	CC = R2 < R3;
+	IF CC jump 4f;
+
+	R2 += -1;
+
+	/* Set things up for memset
+	 * R0 = address
+	 * R1 = filler byte (this case it's zero, set above)
+	 * R2 = count (set above)
+	 */
+
+	I1 = R0;
+	R0 = RETS;
+	I0 = R0;
+	R0 = P0;
+	pseudo_long_call _memset, p0;
+	R0 = I0;
+	RETS = R0;
+	R0 = I1;
+	RTS;
+
+4:
+	LSETUP(5f, 5f) LC0;
+5:
+	B [P0++] = R1;
+6:
+	RTS;
+
+ENDPROC(_strncpy)
diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c
deleted file mode 100644
index ea1dc6b..0000000
--- a/arch/blackfin/lib/strncpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncpy __inline_strncpy
-#include <asm/string.h>
-#undef strncpy
-
-#include <linux/module.h>
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
-	return __inline_strncpy(dest, src, n);
-}
-EXPORT_SYMBOL(strncpy);
diff --git a/arch/blackfin/mach-bf518/boards/Kconfig b/arch/blackfin/mach-bf518/boards/Kconfig
index 9616351..252261e 100644
--- a/arch/blackfin/mach-bf518/boards/Kconfig
+++ b/arch/blackfin/mach-bf518/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN518F_EZBRD
 	help
 	  BF518-EZBRD board support.
 
+config BFIN518F_TCM
+       bool "Bluetechnix TCM-BF518"
+       help
+         Bluetechnix TCM-BF518 board support.
+
 endchoice
diff --git a/arch/blackfin/mach-bf518/boards/Makefile b/arch/blackfin/mach-bf518/boards/Makefile
index 172e859..a9ef25c 100644
--- a/arch/blackfin/mach-bf518/boards/Makefile
+++ b/arch/blackfin/mach-bf518/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN518F_EZBRD)            += ezbrd.o
+obj-$(CONFIG_BFIN518F_TCM)		+= tcm-bf518.o
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 01975c0..44d6d52 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -382,30 +382,93 @@ static struct platform_device bfin_spi1_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -499,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -593,7 +715,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -610,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -644,6 +775,33 @@ static int __init ezbrd_init(void)
 
 arch_initcall(ezbrd_init);
 
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
new file mode 100644
index 0000000..9b72e5c
--- /dev/null
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -0,0 +1,753 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/bfin_sdh.h>
+#include <linux/spi/ad7877.h>
+#include <net/dsa.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM-BF518";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition tcm_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	},
+	{
+		.name       = "linux(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tcm_flash_data = {
+	.width      = 2,
+	.parts      = tcm_partitions,
+	.nr_parts   = ARRAY_SIZE(tcm_partitions),
+};
+
+static struct resource tcm_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device tcm_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &tcm_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &tcm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* SPI0_SSEL2 */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+/* SPI controller data */
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 6,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI0,
+		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+
+/* SPI (1) */
+static struct bfin5xx_spi_master bfin_spi1_info = {
+	.num_chipselect = 5,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct resource bfin_spi1_resource[] = {
+	[0] = {
+		.start = SPI1_REGBASE,
+		.end   = SPI1_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI1,
+		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi1_device = {
+	.name = "bfin-spi",
+	.id = 1, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
+	.resource = bfin_spi1_resource,
+	.dev = {
+		.platform_data = &bfin_spi1_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bf51x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *tcm_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+	&bfin_spi1_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+	&bf51x_sdh_device,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&tcm_flash_device,
+#endif
+};
+
+static int __init tcm_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(tcm_init);
+
+static struct platform_device *tcm_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tcm_early_devices,
+		ARRAY_SIZE(tcm_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h
index 14e52ec..435e76e 100644
--- a/arch/blackfin/mach-bf518/include/mach/irq.h
+++ b/arch/blackfin/mach-bf518/include/mach/irq.h
@@ -151,7 +151,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15 + 1)
+#define IRQ_MAC_PHYINT		119 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h
index 3c6777c..073b5d7 100644
--- a/arch/blackfin/mach-bf518/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -41,7 +41,7 @@
 #define L1_DATA_A_START		0xFF800000
 #define L1_DATA_B_START		0xFF900000
 
-#define L1_CODE_LENGTH		0xC000
+#define L1_CODE_LENGTH		0x8000
 
 #ifdef CONFIG_BFIN_DCACHE
 
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index df224d0..b14c288 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,6 +9,11 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_EZKIT_V2
+	bool "BF527-EZKIT-V2"
+	help
+	  BF527-EZKIT-LITE V2.1+ board support.
+
 config BFIN527_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF527"
 	help
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index eb6ed33..51a5817 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o
 obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
 obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 7ab0800..f392af6 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -18,7 +18,6 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -99,6 +98,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PF11,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -270,50 +273,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -384,8 +343,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -462,8 +421,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -603,30 +562,105 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -725,16 +759,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -795,10 +888,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
@@ -829,7 +918,12 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -846,9 +940,13 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -871,6 +969,33 @@ static int __init cm_init(void)
 
 arch_initcall(cm_init);
 
+static struct platform_device *cmbf527_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cmbf527_early_devices,
+		ARRAY_SIZE(cmbf527_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index cad23b1..606eb36 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -62,6 +62,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -274,8 +278,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -439,30 +443,105 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG0,
+		.end = GPIO_PG0,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -556,16 +635,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -615,9 +753,10 @@ static struct platform_device bfin_dpmc = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	1,
-	.gpio_bl =	GPIO_PG12,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 1,
+	.gpio_bl = GPIO_PG12,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -665,7 +804,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
@@ -686,9 +830,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -711,6 +859,33 @@ static int __init ezbrd_init(void)
 
 arch_initcall(ezbrd_init);
 
+static struct platform_device *ezbrd_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezbrd_early_devices,
+		ARRAY_SIZE(ezbrd_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5294fdd..a05c967 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -16,8 +16,9 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -29,7 +30,11 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
+#ifdef CONFIG_BFIN527_EZKIT_V2
+const char bfin_board_name[] = "ADI BF527-EZKIT V2";
+#else
 const char bfin_board_name[] = "ADI BF527-EZKIT";
+#endif
 
 /*
  *  Driver needs to know address, irq and flag pin.
@@ -97,6 +102,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -143,6 +152,33 @@ static struct platform_device bf52x_t350mcqb_device = {
 };
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_8_BIT_PPI,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
 	{
@@ -326,50 +362,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -440,8 +432,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -488,8 +480,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 0,	/* Export GPIO to gpiolib */
 };
 #endif
 
@@ -500,14 +491,6 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -515,6 +498,29 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -542,8 +548,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -586,17 +592,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
-	 && defined(CONFIG_SND_SOC_WM8731_SPI)
-	{
-		.modalias	= "wm8731",
-		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select    = 5,
-		.controller_data = &spi_wm8731_chip_info,
-		.mode = SPI_MODE_0,
-	},
-#endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -606,6 +601,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -647,30 +652,105 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -749,6 +829,71 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#include <linux/mfd/adp5520.h>
+
+	/*
+	 *  ADP5520/5501 LEDs Data
+	 */
+
+static struct led_info adp5520_leds[] = {
+	{
+		.name = "adp5520-led1",
+		.default_trigger = "none",
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
+	},
+};
+
+static struct adp5520_leds_platform_data adp5520_leds_data = {
+	.num_leds = ARRAY_SIZE(adp5520_leds),
+	.leds = adp5520_leds,
+	.fade_in = ADP5520_FADE_T_600ms,
+	.fade_out = ADP5520_FADE_T_600ms,
+	.led_on_time = ADP5520_LED_ONT_600ms,
+};
+
+	/*
+	 *  ADP5520 Keypad Data
+	 */
+
+static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
+	[ADP5520_KEY(3, 3)]	= KEY_1,
+	[ADP5520_KEY(2, 3)]	= KEY_2,
+	[ADP5520_KEY(1, 3)]	= KEY_3,
+	[ADP5520_KEY(0, 3)]	= KEY_UP,
+	[ADP5520_KEY(3, 2)]	= KEY_4,
+	[ADP5520_KEY(2, 2)]	= KEY_5,
+	[ADP5520_KEY(1, 2)]	= KEY_6,
+	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
+	[ADP5520_KEY(3, 1)]	= KEY_7,
+	[ADP5520_KEY(2, 1)]	= KEY_8,
+	[ADP5520_KEY(1, 1)]	= KEY_9,
+	[ADP5520_KEY(0, 1)]	= KEY_DOT,
+	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
+	[ADP5520_KEY(2, 0)]	= KEY_0,
+	[ADP5520_KEY(1, 0)]	= KEY_HELP,
+	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
+};
+
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
+	.keymap		= adp5520_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
+	.repeat		= 0,
+};
+
+	/*
+	 *  ADP5520/5501 Multifuction Device Init Data
+	 */
+
+static struct adp5520_platform_data adp5520_pdev_data = {
+	.leds = &adp5520_leds_data,
+	.keys = &adp5520_keys_data,
+};
+
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
@@ -766,22 +911,99 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2C),
+		.irq = IRQ_PF8,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+	{
+		I2C_BOARD_INFO("pmic-adp5520", 0x32),
+		.irq = IRQ_PF9,
+		.platform_data = (void *)&adp5520_pdev_data,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
 #include <linux/gpio_keys.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -803,7 +1025,6 @@ static struct platform_device bfin_device_gpiokeys = {
 #endif
 
 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
-#include <linux/input.h>
 #include <asm/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -872,10 +1093,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
@@ -909,8 +1126,17 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bf52x_t350mcqb_device,
 #endif
 
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -927,9 +1153,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -942,6 +1172,14 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -956,6 +1194,33 @@ static int __init ezkit_init(void)
 
 arch_initcall(ezkit_init);
 
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
index aa6579a..704d925 100644
--- a/arch/blackfin/mach-bf527/include/mach/irq.h
+++ b/arch/blackfin/mach-bf527/include/mach/irq.h
@@ -151,7 +151,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15+1)
+#define IRQ_MAC_PHYINT		119 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		120 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		121 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		122 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		123 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	124 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	125 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		126 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 4adceb0..175371a 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -206,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 16,
@@ -257,21 +257,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -394,7 +423,9 @@ static struct platform_device *h8606_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -424,3 +455,18 @@ static int __init H8606_init(void)
 }
 
 arch_initcall(H8606_init);
+
+static struct platform_device *H8606_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(H8606_early_devices,
+		ARRAY_SIZE(H8606_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index b580884..842b4fa 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -195,21 +195,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -241,16 +270,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -344,7 +432,9 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -354,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -392,3 +486,27 @@ static int __init blackstamp_init(void)
 }
 
 arch_initcall(blackstamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 7fc3b86..fdcde61 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -110,7 +110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -242,21 +242,50 @@ static struct platform_device smsc911x_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -288,16 +317,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 static struct resource isp1362_hcd_resources[] = {
@@ -432,7 +520,9 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 	&bfin_dpmc,
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -442,9 +532,13 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 	&rtc_device,
@@ -486,3 +580,27 @@ static int __init cm_bf533_init(void)
 }
 
 arch_initcall(cm_bf533_init);
+
+static struct platform_device *cm_bf533_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf533_early_devices,
+		ARRAY_SIZE(cm_bf533_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index d4689dc..739773c 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -261,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -320,21 +320,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -444,6 +473,30 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -471,7 +524,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -487,6 +542,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -500,3 +567,18 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 8ec42ba..7349970 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -19,6 +19,7 @@
 #include <linux/usb/isp1362.h>
 #endif
 #include <asm/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 
@@ -143,21 +144,50 @@ static struct platform_device spi_bfin_master_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -241,7 +271,9 @@ static struct platform_device *ip0x_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -276,3 +308,18 @@ static int __init ip0x_init(void)
 }
 
 arch_initcall(ip0x_init);
+
+static struct platform_device *ip0x_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ip0x_early_devices,
+		ARRAY_SIZE(ip0x_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 6d68dcf..c457eaa 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -184,7 +184,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -251,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -322,21 +322,50 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX + 1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -368,16 +397,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -474,6 +562,30 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -495,7 +607,9 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -505,9 +619,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
@@ -520,6 +638,18 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 	&stamp_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init stamp_init(void)
@@ -548,6 +678,30 @@ static int __init stamp_init(void)
 
 arch_initcall(stamp_init);
 
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround pull up on cpld / flash pin not being strong enough */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
index c31498b..1f7e976 100644
--- a/arch/blackfin/mach-bf533/include/mach/irq.h
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -104,7 +104,8 @@ Core        Emulation               **
 
 #define GPIO_IRQ_BASE		IRQ_PF0
 
-#define	NR_IRQS		(IRQ_PF15+1)
+#define NR_MACH_IRQS		(IRQ_PF15 + 1)
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7			7
 #define IVG8			8
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index c85f4d7..d35fc5f 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -112,7 +112,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -329,8 +329,8 @@ static struct platform_device cm_flash_device = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
 	{
@@ -373,18 +373,25 @@ static struct resource bfin_uart0_resources[] = {
 #endif
 };
 
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
 static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
 	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
 	{
@@ -427,11 +434,18 @@ static struct resource bfin_uart1_resources[] = {
 #endif
 };
 
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
 static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
 	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
 #endif
@@ -512,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -633,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -683,6 +760,33 @@ static int __init cm_bf537e_init(void)
 
 arch_initcall(cm_bf537e_init);
 
+static struct platform_device *cm_bf537e_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537e_early_devices,
+		ARRAY_SIZE(cm_bf537e_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index ea11aa8..d464ad5 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -423,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -522,7 +649,12 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -539,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -589,6 +725,33 @@ static int __init cm_bf537u_init(void)
 
 arch_initcall(cm_bf537u_init);
 
+static struct platform_device *cm_bf537u_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537u_early_devices,
+		ARRAY_SIZE(cm_bf537u_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 0da9272..05d4599 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -23,12 +23,13 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "CamSig Minotaur BF537";
+const char bfin_board_name[] = "CamSig Minotaur BF537";
 
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
@@ -211,25 +212,93 @@ static struct platform_device bfin_spi0_device = {
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -309,16 +378,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 static struct platform_device *minotaur_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -343,7 +471,12 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -360,9 +493,13 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 };
 
@@ -380,6 +517,33 @@ static int __init minotaur_init(void)
 
 arch_initcall(minotaur_init);
 
+static struct platform_device *minotaur_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(minotaur_early_devices,
+		ARRAY_SIZE(minotaur_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e0afda..812e8f9 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -17,7 +17,6 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
-#include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
 
@@ -99,51 +98,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -221,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -284,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -362,25 +316,93 @@ static struct platform_device bfin_fb_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -446,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
@@ -472,7 +490,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -498,6 +521,24 @@ static int __init pnav_init(void)
 
 arch_initcall(pnav_init);
 
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ac9b52e..9eaf5b0 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -20,10 +20,12 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
+#include <linux/i2c.h>
+#include <linux/i2c/adp5588.h>
+#include <linux/etherdevice.h>
 #include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/i2c.h>
 #include <linux/usb/sl811.h>
 #include <linux/spi/mmc_spi.h>
 #include <linux/leds.h>
@@ -33,6 +35,14 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#ifdef CONFIG_REGULATOR_ADP_SWITCH
+#include <linux/regulator/adp_switch.h>
+#endif
+#ifdef CONFIG_REGULATOR_AD5398
+#include <linux/regulator/ad5398.h>
+#endif
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/userspace-consumer.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -208,8 +218,8 @@ static struct resource sl811_hcd_resources[] = {
 		.end = 0x20340004,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -454,6 +464,9 @@ static struct physmap_flash_data stamp_flash_data = {
 	.width      = 2,
 	.parts      = stamp_partitions,
 	.nr_parts   = ARRAY_SIZE(stamp_partitions),
+#ifdef CONFIG_ROMKERNEL
+	.probe_type = "map_rom",
+#endif
 };
 
 static struct resource stamp_flash_resource = {
@@ -515,20 +528,19 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 8,
-	.cs_gpio = GPIO_PF5,
 };
 #endif
 
@@ -644,6 +656,42 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = {
 };
 #endif
 
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+unsigned short ad2s120x_platform_data[] = {
+	/* used as SAMPLE and RDVEL */
+	GPIO_PF5, GPIO_PF6, 0
+};
+
+static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+unsigned short ad2s1210_platform_data[] = {
+	/* use as SAMPLE, A0, A1 */
+	GPIO_PF7, GPIO_PF8, GPIO_PF9,
+# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
+	/* the RES0 and RES1 pins */
+	GPIO_PF4, GPIO_PF5,
+# endif
+	0,
+};
+
+static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -686,11 +734,11 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1000,
 	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
+	.stopacq_polarity	= 1,
+	.first_conversion_delay	= 3,
+	.acquisition_time	= 1,
+	.averaging		= 1,
+	.pen_down_acc_interval	= 1,
 };
 #endif
 
@@ -701,13 +749,13 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
 	.pressure_max		= 10000,
 	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
+	.first_conversion_delay	= 3,	/* wait 512us before do a first conversion */
+	.acquisition_time	= 1,	/* 4us acquisition time per sample */
 	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.averaging		= 1,	/* take the average of 4 middle samples */
+	.pen_down_acc_interval	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -742,6 +790,11 @@ static const struct adxl34x_platform_data adxl34x_info = {
 /*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
 	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 };
 #endif
 
@@ -813,6 +866,35 @@ static struct adf702x_platform_data adf7021_platform_data = {
 	.adf702x_regs = adf7021_regs,
 	.tx_reg = TXREG,
 };
+static inline void adf702x_mac_init(void)
+{
+	random_ether_addr(adf7021_platform_data.mac_addr);
+}
+#else
+static inline void adf702x_mac_init(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/ads7846.h>
+static struct bfin5xx_spi_chip ad7873_spi_chip_info = {
+	.bits_per_word	= 8,
+};
+
+static int ads7873_get_pendown_state(void)
+{
+	return gpio_get_value(GPIO_PF6);
+}
+
+static struct ads7846_platform_data __initdata ad7873_pdata = {
+	.model		= 7873,		/* AD7873 */
+	.x_max		= 0xfff,
+	.y_max		= 0xfff,
+	.x_plate_ohms	= 620,
+	.debounce_max	= 1,
+	.debounce_rep	= 0,
+	.debounce_tol	= (~0),
+	.get_pendown_state = ads7873_get_pendown_state,
+};
 #endif
 
 #if defined(CONFIG_MTD_DATAFLASH) \
@@ -893,24 +975,25 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.platform_data = "ad1836", /* only includes chip name for the moment */
 		.controller_data = &ad1836_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 	{
-		.modalias = "ad1938",
+		.modalias = "ad193x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.chip_select = 5,
 		.controller_data = &ad1938_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -929,6 +1012,37 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+	{
+		.modalias = "ad2s90",
+		.bus_num = 0,
+		.chip_select = 3,            /* change it for your board */
+		.platform_data = NULL,
+		.controller_data = &ad2s90_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+	{
+		.modalias = "ad2s120x",
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s120x_platform_data,
+		.controller_data = &ad2s120x_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+	{
+		.modalias = "ad2s1210",
+		.max_speed_hz = 8192000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad2s1210_platform_data,
+		.controller_data = &ad2s1210_spi_chip_info,
+	},
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -1016,7 +1130,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
-
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	{
+		.modalias = "ads7846",
+		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.irq = IRQ_PF6,
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
+		.controller_data = &ad7873_spi_chip_info,
+		.platform_data = &ad7873_pdata,
+		.mode = SPI_MODE_0,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -1132,9 +1257,10 @@ static struct platform_device bfin_fb_device = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	0,	/* let something else control the LCD Blacklight */
-	.gpio_bl =	GPIO_PF7,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -1148,8 +1274,8 @@ static struct resource bfin_lq035q1_resources[] = {
 static struct platform_device bfin_lq035q1_device = {
 	.name		= "bfin-lq035q1",
 	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource 	= bfin_lq035q1_resources,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
 	.dev		= {
 		.platform_data = &bfin_lq035q1_data,
 	},
@@ -1157,30 +1283,105 @@ static struct platform_device bfin_lq035q1_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -1260,7 +1461,6 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
@@ -1457,7 +1657,6 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 #endif
 
 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
-#include <linux/i2c/adp5588.h>
 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
 	.gpio_start = 50,
 	.pullup_dis_mask = 0,
@@ -1516,6 +1715,101 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
 };
 #endif
 
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#include <linux/i2c/adp8860.h>
+static struct led_info adp8860_leds[] = {
+	{
+		.name = "adp8860-led7",
+		.default_trigger = "none",
+		.flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
+	},
+};
+
+static struct adp8860_backlight_platform_data adp8860_pdata = {
+	.bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
+			 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6,	/* 1 = Backlight 0 = Individual LED */
+
+	.bl_fade_in = ADP8860_FADE_T_1200ms,		/* Backlight Fade-In Timer */
+	.bl_fade_out = ADP8860_FADE_T_1200ms,		/* Backlight Fade-Out Timer */
+	.bl_fade_law = ADP8860_FADE_LAW_CUBIC1,		/* fade-on/fade-off transfer characteristic */
+
+	.en_ambl_sens = 1,				/* 1 = enable ambient light sensor */
+	.abml_filt = ADP8860_BL_AMBL_FILT_320ms,	/* Light sensor filter time */
+
+	.l1_daylight_max = ADP8860_BL_CUR_mA(20),	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l1_daylight_dim = ADP8860_BL_CUR_mA(0),	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_max = ADP8860_BL_CUR_mA(6),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_office_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_max = ADP8860_BL_CUR_mA(2),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_dark_dim = ADP8860_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	.l2_trip = ADP8860_L2_COMP_CURR_uA(710),	/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l2_hyst = ADP8860_L2_COMP_CURR_uA(73),		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l3_trip = ADP8860_L3_COMP_CURR_uA(43),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	.l3_hyst = ADP8860_L3_COMP_CURR_uA(11),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	.leds = adp8860_leds,
+	.num_leds = ARRAY_SIZE(adp8860_leds),
+	.led_fade_law = ADP8860_FADE_LAW_SQUARE,	/* fade-on/fade-off transfer characteristic */
+	.led_fade_in = ADP8860_FADE_T_600ms,
+	.led_fade_out = ADP8860_FADE_T_600ms,
+	.led_on_time = ADP8860_LED_ONT_200ms,
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+static struct regulator_consumer_supply ad5398_consumer = {
+	.supply = "current",
+};
+
+static struct regulator_init_data ad5398_regulator_data = {
+	.constraints = {
+		.name = "current range",
+		.max_uA = 120000,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies     = &ad5398_consumer,
+};
+
+static struct ad5398_platform_data ad5398_i2c_platform_data = {
+	.current_bits = 10,
+	.current_offset = 4,
+	.regulator_data = &ad5398_regulator_data,
+};
+
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+static struct platform_device ad5398_virt_consumer_device = {
+	.name = "reg-virt-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = "current", /* Passed to driver */
+	},
+};
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data ad5398_bulk_data = {
+	.supply = "current",
+};
+
+static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
+	.name = "ad5398",
+	.num_supplies = 1,
+	.supplies = &ad5398_bulk_data,
+};
+
+static struct platform_device ad5398_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &ad5398_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 	{
@@ -1524,6 +1818,52 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&ad7142_i2c_platform_data,
 	},
 #endif
+
+#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
+	{
+		I2C_BOARD_INFO("ad7150", 0x48),
+		.irq = IRQ_PG5, /* fixme: use real interrupt number */
+	},
+#endif
+
+#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
+	{
+		I2C_BOARD_INFO("ad7152", 0x48),
+	},
+#endif
+
+#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
+	{
+		I2C_BOARD_INFO("ad774x", 0x48),
+	},
+#endif
+
+#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE)
+	{
+		I2C_BOARD_INFO("ad7414", 0x9),
+		.irq = IRQ_PG5,
+		/*
+		 * platform_data pointer is borrwoed by the driver to
+		 * store custimer defined IRQ ALART level mode.
+		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+		 */
+		.platform_data = (void *)IRQF_TRIGGER_LOW,
+	},
+#endif
+
+#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE)
+	{
+		I2C_BOARD_INFO("ad7417", 0xb),
+		.irq = IRQ_PG5,
+		/*
+		 * platform_data pointer is borrwoed by the driver to
+		 * store custimer defined IRQ ALART level mode.
+		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
+		 */
+		.platform_data = (void *)IRQF_TRIGGER_LOW,
+	},
+#endif
+
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
@@ -1595,24 +1935,105 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("adau1761", 0x38),
 	},
 #endif
+#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
+	{
+		I2C_BOARD_INFO("adau1361", 0x38),
+	},
+#endif
 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
 	{
 		I2C_BOARD_INFO("ad5258", 0x18),
 	},
 #endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+	{
+		I2C_BOARD_INFO("ad5398", 0xC),
+		.platform_data = (void *)&ad5398_i2c_platform_data,
+	},
+#endif
+#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+	{
+		I2C_BOARD_INFO("adp8860", 0x2A),
+		.platform_data = (void *)&adp8860_pdata,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
@@ -1701,13 +2122,121 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 static struct platform_device bfin_tdm = {
 	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
 	/* TODO: add platform data here */
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+#define REGULATOR_ADP122        "adp122"
+#define REGULATOR_ADP150        "adp150"
+
+static struct regulator_consumer_supply adp122_consumers = {
+		.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_consumer_supply adp150_consumers = {
+		.supply = REGULATOR_ADP150,
+};
+
+static struct regulator_init_data adp_switch_regulator_data[] = {
+	{
+		.constraints = {
+			.name = REGULATOR_ADP122,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.min_uA = 0,
+			.max_uA = 300000,
+		},
+		.num_consumer_supplies = 1,	/* only 1 */
+		.consumer_supplies     = &adp122_consumers,
+		.driver_data	       = (void *)GPIO_PF2, /* gpio port only */
+	},
+	{
+		.constraints = {
+			.name = REGULATOR_ADP150,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.min_uA = 0,
+			.max_uA = 150000,
+		},
+		.num_consumer_supplies = 1,	/* only 1 */
+		.consumer_supplies     = &adp150_consumers,
+		.driver_data	       = (void *)GPIO_PF3, /* gpio port only */
+	},
+};
+
+static struct adp_switch_platform_data adp_switch_pdata = {
+	.regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
+	.regulator_data = adp_switch_regulator_data,
+};
+
+static struct platform_device adp_switch_device = {
+	.name = "adp_switch",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp_switch_pdata,
+	},
+};
+
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+static struct regulator_bulk_data adp122_bulk_data = {
+	.supply = REGULATOR_ADP122,
+};
+
+static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
+	.name = REGULATOR_ADP122,
+	.num_supplies = 1,
+	.supplies = &adp122_bulk_data,
+};
+
+static struct platform_device adp122_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 0,
+	.dev = {
+		.platform_data = &adp122_userspace_comsumer_data,
+	},
+};
+
+static struct regulator_bulk_data adp150_bulk_data = {
+	.supply = REGULATOR_ADP150,
+};
+
+static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
+	.name = REGULATOR_ADP150,
+	.num_supplies = 1,
+	.supplies = &adp150_bulk_data,
+};
+
+static struct platform_device adp150_userspace_consumer_device = {
+	.name = "reg-userspace-consumer",
+	.id = 1,
+	.dev = {
+		.platform_data = &adp150_userspace_comsumer_data,
+	},
+};
+#endif
+#endif
+
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -1771,7 +2300,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -1788,9 +2322,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 	&bfin_pata_device,
@@ -1808,18 +2346,46 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&stamp_flash_device,
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 	&bfin_tdm,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
+#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
+	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+	&ad5398_virt_consumer_device,
+#endif
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+	&ad5398_userspace_consumer_device,
+#endif
+#endif
+
+#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+	&adp_switch_device,
+#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
+	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+	&adp122_userspace_consumer_device,
+	&adp150_userspace_consumer_device,
+#endif
+#endif
 };
 
 static int __init stamp_init(void)
 {
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
 	bfin_plat_nand_init();
+	adf702x_mac_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 	return 0;
@@ -1827,6 +2393,34 @@ static int __init stamp_init(void)
 
 arch_initcall(stamp_init);
 
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
 void native_machine_restart(char *cmd)
 {
 	/* workaround reboot hang when booting from SPI */
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 57163b6..4f0a2e7 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -327,25 +327,93 @@ static struct platform_device cm_flash_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart1_device = {
 	.name = "bfin-uart",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -425,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
 	.name = "bfin-sport-uart",
 	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -524,7 +651,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -541,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 	&bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 	&isp1362_hcd_device,
@@ -591,6 +727,33 @@ static int __init tcm_bf537_init(void)
 
 arch_initcall(tcm_bf537_init);
 
+static struct platform_device *cm_bf537_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf537_early_devices,
+		ARRAY_SIZE(cm_bf537_early_devices));
+}
+
 void bfin_get_ether_addr(char *addr)
 {
 	random_ether_addr(addr);
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 066d5c2..cf396ea 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1702,628 +1702,6 @@
 #define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
 #define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
 
-/* ************  CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks												*/
-#define	SRS			0x0001	/* Software Reset                                               */
-#define	DNM			0x0002	/* Device Net Mode                                              */
-#define	ABO			0x0004	/* Auto-Bus On Enable                                   */
-#define	TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*)              */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable   */
-#define	SMR			0x0020	/* Sleep Mode Request                                   */
-#define	CSR			0x0040	/* CAN Suspend Mode Request                             */
-#define	CCR			0x0080	/* CAN Configuration Mode Request               */
-
-/* CAN_STATUS Masks												*/
-#define	WT			0x0001	/* TX Warning Flag                                      */
-#define	WR			0x0002	/* RX Warning Flag                                      */
-#define	EP			0x0004	/* Error Passive Mode                           */
-#define	EBO			0x0008	/* Error Bus Off Mode                           */
-#define	SMA			0x0020	/* Sleep Mode Acknowledge                       */
-#define	CSA			0x0040	/* Suspend Mode Acknowledge                     */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge       */
-#define	MBPTR		0x1F00	/* Mailbox Pointer                                      */
-#define	TRM			0x4000	/* Transmit Mode                                        */
-#define	REC			0x8000	/* Receive Mode                                         */
-
-/* CAN_CLOCK Masks									*/
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler  */
-
-/* CAN_TIMING Masks											*/
-#define	TSEG1		0x000F	/* Time Segment 1                               */
-#define	TSEG2		0x0070	/* Time Segment 2                               */
-#define	SAM			0x0080	/* Sampling                                             */
-#define	SJW			0x0300	/* Synchronization Jump Width   */
-
-/* CAN_DEBUG Masks											*/
-#define	DEC			0x0001	/* Disable CAN Error Counters   */
-#define	DRI			0x0002	/* Disable CAN RX Input                 */
-#define	DTO			0x0004	/* Disable CAN TX Output                */
-#define	DIL			0x0008	/* Disable CAN Internal Loop    */
-#define	MAA			0x0010	/* Mode Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode Read Back Enable                */
-#define	CDE			0x8000	/* CAN Debug Enable                             */
-
-/* CAN_CEC Masks										*/
-#define	RXECNT		0x00FF	/* Receive Error Counter        */
-#define	TXECNT		0xFF00	/* Transmit Error Counter       */
-
-/* CAN_INTR Masks											*/
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt	*/
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt	*/
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt                             */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge               */
-#define	CANTX		0x0040	/* CAN TX Bus Value                             */
-#define	CANRX		0x0080	/* CAN RX Bus Value                             */
-
-/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks										*/
-#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0)               */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0)   */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1)    */
-#define	BASEID		0x1FFC	/* Base Identifier                                                              */
-#define	IDE			0x2000	/* Identifier Extension                                                 */
-#define	RTR			0x4000	/* Remote Frame Transmission Request                    */
-#define	AME			0x8000	/* Acceptance Mask Enable                                               */
-
-/* CAN_MBxx_TIMESTAMP Masks					*/
-#define TSV			0xFFFF	/* Timestamp    */
-
-/* CAN_MBxx_LENGTH Masks						*/
-#define DLC			0x000F	/* Data Length Code     */
-
-/* CAN_AMxxH and CAN_AMxxL Masks												*/
-#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL)                     */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL)     */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH)      */
-#define	BASEID		0x1FFC	/* Base Identifier                                                                      */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension Enable                          */
-#define	FMD			0x4000	/* Full Mask Data Field Enable                                          */
-#define	FDF			0x8000	/* Filter On Data Field Enable                                          */
-
-/* CAN_MC1 Masks									*/
-#define	MC0			0x0001	/* Enable Mailbox 0             */
-#define	MC1			0x0002	/* Enable Mailbox 1             */
-#define	MC2			0x0004	/* Enable Mailbox 2             */
-#define	MC3			0x0008	/* Enable Mailbox 3             */
-#define	MC4			0x0010	/* Enable Mailbox 4             */
-#define	MC5			0x0020	/* Enable Mailbox 5             */
-#define	MC6			0x0040	/* Enable Mailbox 6             */
-#define	MC7			0x0080	/* Enable Mailbox 7             */
-#define	MC8			0x0100	/* Enable Mailbox 8             */
-#define	MC9			0x0200	/* Enable Mailbox 9             */
-#define	MC10		0x0400	/* Enable Mailbox 10    */
-#define	MC11		0x0800	/* Enable Mailbox 11    */
-#define	MC12		0x1000	/* Enable Mailbox 12    */
-#define	MC13		0x2000	/* Enable Mailbox 13    */
-#define	MC14		0x4000	/* Enable Mailbox 14    */
-#define	MC15		0x8000	/* Enable Mailbox 15    */
-
-/* CAN_MC2 Masks									*/
-#define	MC16		0x0001	/* Enable Mailbox 16    */
-#define	MC17		0x0002	/* Enable Mailbox 17    */
-#define	MC18		0x0004	/* Enable Mailbox 18    */
-#define	MC19		0x0008	/* Enable Mailbox 19    */
-#define	MC20		0x0010	/* Enable Mailbox 20    */
-#define	MC21		0x0020	/* Enable Mailbox 21    */
-#define	MC22		0x0040	/* Enable Mailbox 22    */
-#define	MC23		0x0080	/* Enable Mailbox 23    */
-#define	MC24		0x0100	/* Enable Mailbox 24    */
-#define	MC25		0x0200	/* Enable Mailbox 25    */
-#define	MC26		0x0400	/* Enable Mailbox 26    */
-#define	MC27		0x0800	/* Enable Mailbox 27    */
-#define	MC28		0x1000	/* Enable Mailbox 28    */
-#define	MC29		0x2000	/* Enable Mailbox 29    */
-#define	MC30		0x4000	/* Enable Mailbox 30    */
-#define	MC31		0x8000	/* Enable Mailbox 31    */
-
-/* CAN_MD1 Masks												*/
-#define	MD0			0x0001	/* Enable Mailbox 0 For Receive         */
-#define	MD1			0x0002	/* Enable Mailbox 1 For Receive         */
-#define	MD2			0x0004	/* Enable Mailbox 2 For Receive         */
-#define	MD3			0x0008	/* Enable Mailbox 3 For Receive         */
-#define	MD4			0x0010	/* Enable Mailbox 4 For Receive         */
-#define	MD5			0x0020	/* Enable Mailbox 5 For Receive         */
-#define	MD6			0x0040	/* Enable Mailbox 6 For Receive         */
-#define	MD7			0x0080	/* Enable Mailbox 7 For Receive         */
-#define	MD8			0x0100	/* Enable Mailbox 8 For Receive         */
-#define	MD9			0x0200	/* Enable Mailbox 9 For Receive         */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive        */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive        */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive        */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive        */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive        */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive        */
-
-/* CAN_MD2 Masks												*/
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive        */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive        */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive        */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive        */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive        */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive        */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive        */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive        */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive        */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive        */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive        */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive        */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive        */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive        */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive        */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive        */
-
-/* CAN_RMP1 Masks												*/
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0      */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1      */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2      */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3      */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4      */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5      */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6      */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7      */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8      */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9      */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10     */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11     */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12     */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13     */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14     */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15     */
-
-/* CAN_RMP2 Masks												*/
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16     */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17     */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18     */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19     */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20     */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21     */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22     */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23     */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24     */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25     */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26     */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27     */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28     */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29     */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30     */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31     */
-
-/* CAN_RML1 Masks												*/
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0         */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1         */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2         */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3         */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4         */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5         */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6         */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7         */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8         */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9         */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10        */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11        */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12        */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13        */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14        */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15        */
-
-/* CAN_RML2 Masks												*/
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16        */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17        */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18        */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19        */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20        */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21        */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22        */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23        */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24        */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25        */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26        */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27        */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28        */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29        */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30        */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31        */
-
-/* CAN_OPSS1 Masks																				*/
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0       */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1       */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2       */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3       */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4       */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5       */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6       */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7       */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8       */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9       */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10      */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11      */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12      */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13      */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14      */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15      */
-
-/* CAN_OPSS2 Masks																				*/
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16      */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17      */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18      */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19      */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20      */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21      */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22      */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23      */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24      */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25      */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26      */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27      */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28      */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29      */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30      */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31      */
-
-/* CAN_TRR1 Masks														*/
-#define	TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0      */
-#define	TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1      */
-#define	TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2      */
-#define	TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3      */
-#define	TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4      */
-#define	TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5      */
-#define	TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6      */
-#define	TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7      */
-#define	TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8      */
-#define	TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9      */
-#define	TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10     */
-#define	TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11     */
-#define	TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12     */
-#define	TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13     */
-#define	TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14     */
-#define	TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15     */
-
-/* CAN_TRR2 Masks														*/
-#define	TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16     */
-#define	TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17     */
-#define	TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18     */
-#define	TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19     */
-#define	TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20     */
-#define	TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21     */
-#define	TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22     */
-#define	TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23     */
-#define	TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24     */
-#define	TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25     */
-#define	TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26     */
-#define	TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27     */
-#define	TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28     */
-#define	TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29     */
-#define	TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30     */
-#define	TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31     */
-
-/* CAN_TRS1 Masks													*/
-#define	TRS0		0x0001	/* Remote Frame Request For Mailbox 0   */
-#define	TRS1		0x0002	/* Remote Frame Request For Mailbox 1   */
-#define	TRS2		0x0004	/* Remote Frame Request For Mailbox 2   */
-#define	TRS3		0x0008	/* Remote Frame Request For Mailbox 3   */
-#define	TRS4		0x0010	/* Remote Frame Request For Mailbox 4   */
-#define	TRS5		0x0020	/* Remote Frame Request For Mailbox 5   */
-#define	TRS6		0x0040	/* Remote Frame Request For Mailbox 6   */
-#define	TRS7		0x0080	/* Remote Frame Request For Mailbox 7   */
-#define	TRS8		0x0100	/* Remote Frame Request For Mailbox 8   */
-#define	TRS9		0x0200	/* Remote Frame Request For Mailbox 9   */
-#define	TRS10		0x0400	/* Remote Frame Request For Mailbox 10  */
-#define	TRS11		0x0800	/* Remote Frame Request For Mailbox 11  */
-#define	TRS12		0x1000	/* Remote Frame Request For Mailbox 12  */
-#define	TRS13		0x2000	/* Remote Frame Request For Mailbox 13  */
-#define	TRS14		0x4000	/* Remote Frame Request For Mailbox 14  */
-#define	TRS15		0x8000	/* Remote Frame Request For Mailbox 15  */
-
-/* CAN_TRS2 Masks													*/
-#define	TRS16		0x0001	/* Remote Frame Request For Mailbox 16  */
-#define	TRS17		0x0002	/* Remote Frame Request For Mailbox 17  */
-#define	TRS18		0x0004	/* Remote Frame Request For Mailbox 18  */
-#define	TRS19		0x0008	/* Remote Frame Request For Mailbox 19  */
-#define	TRS20		0x0010	/* Remote Frame Request For Mailbox 20  */
-#define	TRS21		0x0020	/* Remote Frame Request For Mailbox 21  */
-#define	TRS22		0x0040	/* Remote Frame Request For Mailbox 22  */
-#define	TRS23		0x0080	/* Remote Frame Request For Mailbox 23  */
-#define	TRS24		0x0100	/* Remote Frame Request For Mailbox 24  */
-#define	TRS25		0x0200	/* Remote Frame Request For Mailbox 25  */
-#define	TRS26		0x0400	/* Remote Frame Request For Mailbox 26  */
-#define	TRS27		0x0800	/* Remote Frame Request For Mailbox 27  */
-#define	TRS28		0x1000	/* Remote Frame Request For Mailbox 28  */
-#define	TRS29		0x2000	/* Remote Frame Request For Mailbox 29  */
-#define	TRS30		0x4000	/* Remote Frame Request For Mailbox 30  */
-#define	TRS31		0x8000	/* Remote Frame Request For Mailbox 31  */
-
-/* CAN_AA1 Masks												*/
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0         */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1         */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2         */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3         */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4         */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5         */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6         */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7         */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8         */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9         */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10        */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11        */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12        */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13        */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14        */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15        */
-
-/* CAN_AA2 Masks												*/
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16        */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17        */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18        */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19        */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20        */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21        */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22        */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23        */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24        */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25        */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26        */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27        */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28        */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29        */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30        */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31        */
-
-/* CAN_TA1 Masks													*/
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0   */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1   */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2   */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3   */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4   */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5   */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6   */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7   */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8   */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9   */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10  */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11  */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12  */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13  */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14  */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15  */
-
-/* CAN_TA2 Masks													*/
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16  */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17  */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18  */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19  */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20  */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21  */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22  */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23  */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24  */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25  */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26  */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27  */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28  */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29  */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30  */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31  */
-
-/* CAN_MBTD Masks												*/
-#define TDPTR		0x001F	/* Mailbox To Temporarily Disable       */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge        */
-#define	TDR			0x0080	/* Temporary Disable Request            */
-
-/* CAN_RFH1 Masks																		*/
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0         */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1         */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2         */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3         */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4         */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5         */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6         */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7         */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8         */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9         */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10        */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11        */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12        */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13        */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14        */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15        */
-
-/* CAN_RFH2 Masks																		*/
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16        */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17        */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18        */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19        */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20        */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21        */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22        */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23        */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24        */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25        */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26        */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27        */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28        */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29        */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30        */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31        */
-
-/* CAN_MBTIF1 Masks													*/
-#define	MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0             */
-#define	MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1             */
-#define	MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2             */
-#define	MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3             */
-#define	MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4             */
-#define	MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5             */
-#define	MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6             */
-#define	MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7             */
-#define	MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8             */
-#define	MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9             */
-#define	MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10    */
-#define	MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11    */
-#define	MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12    */
-#define	MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13    */
-#define	MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14    */
-#define	MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBTIF2 Masks													*/
-#define	MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16    */
-#define	MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17    */
-#define	MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18    */
-#define	MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19    */
-#define	MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20    */
-#define	MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21    */
-#define	MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22    */
-#define	MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23    */
-#define	MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24    */
-#define	MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25    */
-#define	MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26    */
-#define	MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27    */
-#define	MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28    */
-#define	MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29    */
-#define	MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30    */
-#define	MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBRIF1 Masks													*/
-#define	MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0             */
-#define	MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1             */
-#define	MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2             */
-#define	MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3             */
-#define	MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4             */
-#define	MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5             */
-#define	MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6             */
-#define	MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7             */
-#define	MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8             */
-#define	MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9             */
-#define	MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10    */
-#define	MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11    */
-#define	MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12    */
-#define	MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13    */
-#define	MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14    */
-#define	MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBRIF2 Masks													*/
-#define	MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16    */
-#define	MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17    */
-#define	MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18    */
-#define	MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19    */
-#define	MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20    */
-#define	MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21    */
-#define	MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22    */
-#define	MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23    */
-#define	MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24    */
-#define	MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25    */
-#define	MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26    */
-#define	MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27    */
-#define	MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28    */
-#define	MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29    */
-#define	MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30    */
-#define	MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBIM1 Masks												*/
-#define	MBIM0		0x0001	/* Enable Interrupt For Mailbox 0       */
-#define	MBIM1		0x0002	/* Enable Interrupt For Mailbox 1       */
-#define	MBIM2		0x0004	/* Enable Interrupt For Mailbox 2       */
-#define	MBIM3		0x0008	/* Enable Interrupt For Mailbox 3       */
-#define	MBIM4		0x0010	/* Enable Interrupt For Mailbox 4       */
-#define	MBIM5		0x0020	/* Enable Interrupt For Mailbox 5       */
-#define	MBIM6		0x0040	/* Enable Interrupt For Mailbox 6       */
-#define	MBIM7		0x0080	/* Enable Interrupt For Mailbox 7       */
-#define	MBIM8		0x0100	/* Enable Interrupt For Mailbox 8       */
-#define	MBIM9		0x0200	/* Enable Interrupt For Mailbox 9       */
-#define	MBIM10		0x0400	/* Enable Interrupt For Mailbox 10      */
-#define	MBIM11		0x0800	/* Enable Interrupt For Mailbox 11      */
-#define	MBIM12		0x1000	/* Enable Interrupt For Mailbox 12      */
-#define	MBIM13		0x2000	/* Enable Interrupt For Mailbox 13      */
-#define	MBIM14		0x4000	/* Enable Interrupt For Mailbox 14      */
-#define	MBIM15		0x8000	/* Enable Interrupt For Mailbox 15      */
-
-/* CAN_MBIM2 Masks												*/
-#define	MBIM16		0x0001	/* Enable Interrupt For Mailbox 16      */
-#define	MBIM17		0x0002	/* Enable Interrupt For Mailbox 17      */
-#define	MBIM18		0x0004	/* Enable Interrupt For Mailbox 18      */
-#define	MBIM19		0x0008	/* Enable Interrupt For Mailbox 19      */
-#define	MBIM20		0x0010	/* Enable Interrupt For Mailbox 20      */
-#define	MBIM21		0x0020	/* Enable Interrupt For Mailbox 21      */
-#define	MBIM22		0x0040	/* Enable Interrupt For Mailbox 22      */
-#define	MBIM23		0x0080	/* Enable Interrupt For Mailbox 23      */
-#define	MBIM24		0x0100	/* Enable Interrupt For Mailbox 24      */
-#define	MBIM25		0x0200	/* Enable Interrupt For Mailbox 25      */
-#define	MBIM26		0x0400	/* Enable Interrupt For Mailbox 26      */
-#define	MBIM27		0x0800	/* Enable Interrupt For Mailbox 27      */
-#define	MBIM28		0x1000	/* Enable Interrupt For Mailbox 28      */
-#define	MBIM29		0x2000	/* Enable Interrupt For Mailbox 29      */
-#define	MBIM30		0x4000	/* Enable Interrupt For Mailbox 30      */
-#define	MBIM31		0x8000	/* Enable Interrupt For Mailbox 31      */
-
-/* CAN_GIM Masks																*/
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt                                      */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt                                      */
-#define	EPIM		0x0004	/* Enable Error-Passive Mode Interrupt                          */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt                                                     */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt                                                     */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt     */
-#define	AAIM		0x0040	/* Enable Abort Acknowledge Interrupt                           */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt                                     */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt          */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt                     */
-#define	ADIM		0x0400	/* Enable Access Denied Interrupt                                       */
-
-/* CAN_GIS Masks															*/
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status                                    */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status                                    */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status                                */
-#define	BOIS		0x0008	/* Bus Off IRQ Status                                                   */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status                                                   */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status   */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status                                 */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status                                   */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status                */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status                   */
-#define	ADIS		0x0400	/* Access Denied IRQ Status                                             */
-
-/* CAN_GIF Masks															*/
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag                                              */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag                                              */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag                                  */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag                                                             */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag                                                             */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag             */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag                                   */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag                                             */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag                  */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag                             */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag                                               */
-
-/* CAN_UCCNF Masks															*/
-#define	UCCNF		0x000F	/* Universal Counter Mode                                               */
-#define UC_STAMP	0x0001	/*              Timestamp Mode                                                  */
-#define UC_WDOG		0x0002	/*              Watchdog Mode                                                   */
-#define UC_AUTOTX	0x0003	/*              Auto-Transmit Mode                                              */
-#define UC_ERROR	0x0006	/*              CAN Error Frame Count                                   */
-#define UC_OVER		0x0007	/*              CAN Overload Frame Count                                */
-#define UC_LOST		0x0008	/*              Arbitration Lost During TX Count                */
-#define UC_AA		0x0009	/*              TX Abort Count                                                  */
-#define UC_TA		0x000A	/*              TX Successful Count                                             */
-#define UC_REJECT	0x000B	/*              RX Message Rejected Count                               */
-#define UC_RML		0x000C	/*              RX Message Lost Count                                   */
-#define UC_RX		0x000D	/*              Total Successful RX Messages Count              */
-#define UC_RMP		0x000E	/*              Successful RX W/Matching ID Count               */
-#define UC_ALL		0x000F	/*              Correct Message On CAN Bus Line Count   */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear                               */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger                                */
-#define	UCE			0x0080	/* Universal Counter Enable                                             */
-
-/* CAN_ESR Masks										*/
-#define	ACKE		0x0004	/* Acknowledge Error            */
-#define	SER			0x0008	/* Stuff Error                          */
-#define	CRCE		0x0010	/* CRC Error                            */
-#define	SA0			0x0020	/* Stuck At Dominant Error      */
-#define	BEF			0x0040	/* Bit Error Flag                       */
-#define	FER			0x0080	/* Form Error Flag                      */
-
-/* CAN_EWR Masks												*/
-#define	EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS)     */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS)     */
-
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
 #define	PJSE			0x0001	/* Port J SPI/SPORT Enable                      */
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 0defa94..1a6d617 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -74,7 +74,7 @@
 
 #define IRQ_PPI_ERROR       42	/*PPI Error Interrupt */
 #define IRQ_CAN_ERROR       43	/*CAN Error Interrupt */
-#define IRQ_MAC_ERROR       44	/*PPI Error Interrupt */
+#define IRQ_MAC_ERROR       44	/*MAC Status/Error Interrupt */
 #define IRQ_SPORT0_ERROR    45	/*SPORT0 Error Interrupt */
 #define IRQ_SPORT1_ERROR    46	/*SPORT1 Error Interrupt */
 #define IRQ_SPI_ERROR       47	/*SPI Error Interrupt */
@@ -134,7 +134,17 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PH15+1)
+#define IRQ_MAC_PHYINT		98 /* PHY_INT Interrupt */
+#define IRQ_MAC_MMCINT		99 /* MMC Counter Interrupt */
+#define IRQ_MAC_RXFSINT		100 /* RX Frame-Status Interrupt */
+#define IRQ_MAC_TXFSINT		101 /* TX Frame-Status Interrupt */
+#define IRQ_MAC_WAKEDET		102 /* Wake-Up Interrupt */
+#define IRQ_MAC_RXDMAERR	103 /* RX DMA Direction Error Interrupt */
+#define IRQ_MAC_TXDMAERR	104 /* TX DMA Direction Error Interrupt */
+#define IRQ_MAC_STMDONE		105 /* Station Mgt. Transfer Done Interrupt */
+
+#define NR_MACH_IRQS	(IRQ_MAC_STMDONE + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index c296bb1..1a1f658 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -41,37 +41,148 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PG7,
+		.end = GPIO_PG7,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PG6,
+		.end = GPIO_PG6,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_THR,
+		.end = UART2_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
 };
 
-static struct platform_device bfin_uart_device = {
+static struct platform_device bfin_uart2_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -151,6 +262,145 @@ static struct platform_device bfin_sir2_device = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -268,8 +518,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.median			= 2,	/* do 8 measurements */
 	.averaging 		= 1,	/* take the average of 4 middle samples */
 	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_output		= 1,	/* configure AUX/VBAT/GPIO as GPIO output */
-	.gpio_default 		= 1,	/* During initialization set GPIO = HIGH */
+	.gpio_export		= 1,	/* Export GPIO to gpiolib */
+	.gpio_base		= -1,	/* Dynamic allocation */
 };
 #endif
 
@@ -284,9 +534,10 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 #include <asm/bfin-lq035q1.h>
 
 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = 	LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.use_bl = 	0,	/* let something else control the LCD Blacklight */
-	.gpio_bl =	GPIO_PF7,
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 0,	/* let something else control the LCD Blacklight */
+	.gpio_bl = GPIO_PF7,
 };
 
 static struct resource bfin_lq035q1_resources[] = {
@@ -622,7 +873,15 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -648,6 +907,21 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 	&bfin_can_device,
 #endif
@@ -683,3 +957,39 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index fac563e..d7061d9 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2418,625 +2418,4 @@
 #define	RCV_HALF	0x0004		/*		Receive	FIFO Has 1 Byte	To Read */
 #define	RCV_FULL	0x000C		/*		Receive	FIFO Full (2 Bytes To Read) */
 
-
-/* ************	 CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks					 */
-#define	SRS			0x0001	/* Software Reset */
-#define	DNM			0x0002	/* Device Net Mode */
-#define	ABO			0x0004	/* Auto-Bus On Enable */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
-#define	SMR			0x0020	/* Sleep Mode Request */
-#define	CSR			0x0040	/* CAN Suspend Mode Request */
-#define	CCR			0x0080	/* CAN Configuration Mode Request */
-
-/* CAN_STATUS Masks					 */
-#define	WT			0x0001	/* TX Warning Flag */
-#define	WR			0x0002	/* RX Warning Flag */
-#define	EP			0x0004	/* Error Passive Mode */
-#define	EBO			0x0008	/* Error Bus Off Mode */
-#define	CSA			0x0040	/* Suspend Mode	Acknowledge */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge */
-#define	MBPTR		0x1F00	/* Mailbox Pointer */
-#define	TRM			0x4000	/* Transmit Mode */
-#define	REC			0x8000	/* Receive Mode */
-
-/* CAN_CLOCK Masks		 */
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler */
-
-/* CAN_TIMING Masks				 */
-#define	TSEG1		0x000F	/* Time	Segment	1 */
-#define	TSEG2		0x0070	/* Time	Segment	2 */
-#define	SAM			0x0080	/* Sampling */
-#define	SJW			0x0300	/* Synchronization Jump	Width */
-
-/* CAN_DEBUG Masks				 */
-#define	DEC			0x0001	/* Disable CAN Error Counters */
-#define	DRI			0x0002	/* Disable CAN RX Input */
-#define	DTO			0x0004	/* Disable CAN TX Output */
-#define	DIL			0x0008	/* Disable CAN Internal	Loop */
-#define	MAA			0x0010	/* Mode	Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode	Read Back Enable */
-#define	CDE			0x8000	/* CAN Debug Enable */
-
-/* CAN_CEC Masks			 */
-#define	RXECNT		0x00FF	/* Receive Error Counter */
-#define	TXECNT		0xFF00	/* Transmit Error Counter */
-
-/* CAN_INTR Masks				 */
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge */
-#define	CANTX		0x0040	/* CAN TX Bus Value */
-#define	CANRX		0x0080	/* CAN RX Bus Value */
-
-/* CAN_MBxx_ID1	and CAN_MBxx_ID0 Masks			 */
-#define	DFC			0xFFFF	/* Data	Filtering Code (If Enabled) (ID0) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(ID0) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (ID1) */
-#define	BASEID		0x1FFC	/* Base	Identifier	 */
-#define	IDE			0x2000	/* Identifier Extension */
-#define	RTR			0x4000	/* Remote Frame	Transmission Request */
-#define	AME			0x8000	/* Acceptance Mask Enable */
-
-/* CAN_MBxx_TIMESTAMP Masks */
-#define	TSV			0xFFFF	/* Timestamp */
-
-/* CAN_MBxx_LENGTH Masks */
-#define	DLC			0x000F	/* Data	Length Code */
-
-/* CAN_AMxxH and CAN_AMxxL Masks					 */
-#define	DFM			0xFFFF	/* Data	Field Mask (If Enabled)	(CAN_AMxxL) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(CAN_AMxxL) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (CAN_AMxxH) */
-#define	BASEID		0x1FFC	/* Base	Identifier		 */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension	Enable */
-#define	FMD			0x4000	/* Full	Mask Data Field	Enable */
-#define	FDF			0x8000	/* Filter On Data Field	Enable */
-
-/* CAN_MC1 Masks		 */
-#define	MC0			0x0001	/* Enable Mailbox 0 */
-#define	MC1			0x0002	/* Enable Mailbox 1 */
-#define	MC2			0x0004	/* Enable Mailbox 2 */
-#define	MC3			0x0008	/* Enable Mailbox 3 */
-#define	MC4			0x0010	/* Enable Mailbox 4 */
-#define	MC5			0x0020	/* Enable Mailbox 5 */
-#define	MC6			0x0040	/* Enable Mailbox 6 */
-#define	MC7			0x0080	/* Enable Mailbox 7 */
-#define	MC8			0x0100	/* Enable Mailbox 8 */
-#define	MC9			0x0200	/* Enable Mailbox 9 */
-#define	MC10		0x0400	/* Enable Mailbox 10 */
-#define	MC11		0x0800	/* Enable Mailbox 11 */
-#define	MC12		0x1000	/* Enable Mailbox 12 */
-#define	MC13		0x2000	/* Enable Mailbox 13 */
-#define	MC14		0x4000	/* Enable Mailbox 14 */
-#define	MC15		0x8000	/* Enable Mailbox 15 */
-
-/* CAN_MC2 Masks		 */
-#define	MC16		0x0001	/* Enable Mailbox 16 */
-#define	MC17		0x0002	/* Enable Mailbox 17 */
-#define	MC18		0x0004	/* Enable Mailbox 18 */
-#define	MC19		0x0008	/* Enable Mailbox 19 */
-#define	MC20		0x0010	/* Enable Mailbox 20 */
-#define	MC21		0x0020	/* Enable Mailbox 21 */
-#define	MC22		0x0040	/* Enable Mailbox 22 */
-#define	MC23		0x0080	/* Enable Mailbox 23 */
-#define	MC24		0x0100	/* Enable Mailbox 24 */
-#define	MC25		0x0200	/* Enable Mailbox 25 */
-#define	MC26		0x0400	/* Enable Mailbox 26 */
-#define	MC27		0x0800	/* Enable Mailbox 27 */
-#define	MC28		0x1000	/* Enable Mailbox 28 */
-#define	MC29		0x2000	/* Enable Mailbox 29 */
-#define	MC30		0x4000	/* Enable Mailbox 30 */
-#define	MC31		0x8000	/* Enable Mailbox 31 */
-
-/* CAN_MD1 Masks					 */
-#define	MD0			0x0001	/* Enable Mailbox 0 For	Receive */
-#define	MD1			0x0002	/* Enable Mailbox 1 For	Receive */
-#define	MD2			0x0004	/* Enable Mailbox 2 For	Receive */
-#define	MD3			0x0008	/* Enable Mailbox 3 For	Receive */
-#define	MD4			0x0010	/* Enable Mailbox 4 For	Receive */
-#define	MD5			0x0020	/* Enable Mailbox 5 For	Receive */
-#define	MD6			0x0040	/* Enable Mailbox 6 For	Receive */
-#define	MD7			0x0080	/* Enable Mailbox 7 For	Receive */
-#define	MD8			0x0100	/* Enable Mailbox 8 For	Receive */
-#define	MD9			0x0200	/* Enable Mailbox 9 For	Receive */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive */
-
-/* CAN_MD2 Masks					 */
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive */
-
-/* CAN_RMP1 Masks					 */
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
-
-/* CAN_RMP2 Masks					 */
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
-
-/* CAN_RML1 Masks					 */
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0 */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1 */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2 */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3 */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4 */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5 */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6 */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7 */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8 */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9 */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10 */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11 */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12 */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13 */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14 */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15 */
-
-/* CAN_RML2 Masks					 */
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16 */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17 */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18 */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19 */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20 */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21 */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22 */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23 */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24 */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25 */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26 */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27 */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28 */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29 */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30 */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31 */
-
-/* CAN_OPSS1 Masks													 */
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	0 */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	1 */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	2 */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	3 */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	4 */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	5 */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	6 */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	7 */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	8 */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	9 */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	10 */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	11 */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	12 */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	13 */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	14 */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	15 */
-
-/* CAN_OPSS2 Masks													 */
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	16 */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	17 */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	18 */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	19 */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	20 */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	21 */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	22 */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	23 */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	24 */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	25 */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	26 */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	27 */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	28 */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	29 */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	30 */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	31 */
-
-/* CAN_TRR1 Masks							 */
-#define	TRR0		0x0001	/* Deny	But Don't Lock Access To Mailbox 0 */
-#define	TRR1		0x0002	/* Deny	But Don't Lock Access To Mailbox 1 */
-#define	TRR2		0x0004	/* Deny	But Don't Lock Access To Mailbox 2 */
-#define	TRR3		0x0008	/* Deny	But Don't Lock Access To Mailbox 3 */
-#define	TRR4		0x0010	/* Deny	But Don't Lock Access To Mailbox 4 */
-#define	TRR5		0x0020	/* Deny	But Don't Lock Access To Mailbox 5 */
-#define	TRR6		0x0040	/* Deny	But Don't Lock Access To Mailbox 6 */
-#define	TRR7		0x0080	/* Deny	But Don't Lock Access To Mailbox 7 */
-#define	TRR8		0x0100	/* Deny	But Don't Lock Access To Mailbox 8 */
-#define	TRR9		0x0200	/* Deny	But Don't Lock Access To Mailbox 9 */
-#define	TRR10		0x0400	/* Deny	But Don't Lock Access To Mailbox 10 */
-#define	TRR11		0x0800	/* Deny	But Don't Lock Access To Mailbox 11 */
-#define	TRR12		0x1000	/* Deny	But Don't Lock Access To Mailbox 12 */
-#define	TRR13		0x2000	/* Deny	But Don't Lock Access To Mailbox 13 */
-#define	TRR14		0x4000	/* Deny	But Don't Lock Access To Mailbox 14 */
-#define	TRR15		0x8000	/* Deny	But Don't Lock Access To Mailbox 15 */
-
-/* CAN_TRR2 Masks							 */
-#define	TRR16		0x0001	/* Deny	But Don't Lock Access To Mailbox 16 */
-#define	TRR17		0x0002	/* Deny	But Don't Lock Access To Mailbox 17 */
-#define	TRR18		0x0004	/* Deny	But Don't Lock Access To Mailbox 18 */
-#define	TRR19		0x0008	/* Deny	But Don't Lock Access To Mailbox 19 */
-#define	TRR20		0x0010	/* Deny	But Don't Lock Access To Mailbox 20 */
-#define	TRR21		0x0020	/* Deny	But Don't Lock Access To Mailbox 21 */
-#define	TRR22		0x0040	/* Deny	But Don't Lock Access To Mailbox 22 */
-#define	TRR23		0x0080	/* Deny	But Don't Lock Access To Mailbox 23 */
-#define	TRR24		0x0100	/* Deny	But Don't Lock Access To Mailbox 24 */
-#define	TRR25		0x0200	/* Deny	But Don't Lock Access To Mailbox 25 */
-#define	TRR26		0x0400	/* Deny	But Don't Lock Access To Mailbox 26 */
-#define	TRR27		0x0800	/* Deny	But Don't Lock Access To Mailbox 27 */
-#define	TRR28		0x1000	/* Deny	But Don't Lock Access To Mailbox 28 */
-#define	TRR29		0x2000	/* Deny	But Don't Lock Access To Mailbox 29 */
-#define	TRR30		0x4000	/* Deny	But Don't Lock Access To Mailbox 30 */
-#define	TRR31		0x8000	/* Deny	But Don't Lock Access To Mailbox 31 */
-
-/* CAN_TRS1 Masks						 */
-#define	TRS0		0x0001	/* Remote Frame	Request	For Mailbox 0 */
-#define	TRS1		0x0002	/* Remote Frame	Request	For Mailbox 1 */
-#define	TRS2		0x0004	/* Remote Frame	Request	For Mailbox 2 */
-#define	TRS3		0x0008	/* Remote Frame	Request	For Mailbox 3 */
-#define	TRS4		0x0010	/* Remote Frame	Request	For Mailbox 4 */
-#define	TRS5		0x0020	/* Remote Frame	Request	For Mailbox 5 */
-#define	TRS6		0x0040	/* Remote Frame	Request	For Mailbox 6 */
-#define	TRS7		0x0080	/* Remote Frame	Request	For Mailbox 7 */
-#define	TRS8		0x0100	/* Remote Frame	Request	For Mailbox 8 */
-#define	TRS9		0x0200	/* Remote Frame	Request	For Mailbox 9 */
-#define	TRS10		0x0400	/* Remote Frame	Request	For Mailbox 10 */
-#define	TRS11		0x0800	/* Remote Frame	Request	For Mailbox 11 */
-#define	TRS12		0x1000	/* Remote Frame	Request	For Mailbox 12 */
-#define	TRS13		0x2000	/* Remote Frame	Request	For Mailbox 13 */
-#define	TRS14		0x4000	/* Remote Frame	Request	For Mailbox 14 */
-#define	TRS15		0x8000	/* Remote Frame	Request	For Mailbox 15 */
-
-/* CAN_TRS2 Masks						 */
-#define	TRS16		0x0001	/* Remote Frame	Request	For Mailbox 16 */
-#define	TRS17		0x0002	/* Remote Frame	Request	For Mailbox 17 */
-#define	TRS18		0x0004	/* Remote Frame	Request	For Mailbox 18 */
-#define	TRS19		0x0008	/* Remote Frame	Request	For Mailbox 19 */
-#define	TRS20		0x0010	/* Remote Frame	Request	For Mailbox 20 */
-#define	TRS21		0x0020	/* Remote Frame	Request	For Mailbox 21 */
-#define	TRS22		0x0040	/* Remote Frame	Request	For Mailbox 22 */
-#define	TRS23		0x0080	/* Remote Frame	Request	For Mailbox 23 */
-#define	TRS24		0x0100	/* Remote Frame	Request	For Mailbox 24 */
-#define	TRS25		0x0200	/* Remote Frame	Request	For Mailbox 25 */
-#define	TRS26		0x0400	/* Remote Frame	Request	For Mailbox 26 */
-#define	TRS27		0x0800	/* Remote Frame	Request	For Mailbox 27 */
-#define	TRS28		0x1000	/* Remote Frame	Request	For Mailbox 28 */
-#define	TRS29		0x2000	/* Remote Frame	Request	For Mailbox 29 */
-#define	TRS30		0x4000	/* Remote Frame	Request	For Mailbox 30 */
-#define	TRS31		0x8000	/* Remote Frame	Request	For Mailbox 31 */
-
-/* CAN_AA1 Masks					 */
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0 */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1 */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2 */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3 */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4 */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5 */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6 */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7 */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8 */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9 */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10 */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11 */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12 */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13 */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14 */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15 */
-
-/* CAN_AA2 Masks					 */
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16 */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17 */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18 */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19 */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20 */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21 */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22 */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23 */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24 */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25 */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26 */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27 */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28 */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29 */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30 */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31 */
-
-/* CAN_TA1 Masks						 */
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0 */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1 */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2 */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3 */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4 */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5 */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6 */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7 */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8 */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9 */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10 */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11 */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12 */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13 */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14 */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15 */
-
-/* CAN_TA2 Masks						 */
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16 */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17 */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18 */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19 */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20 */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21 */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22 */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23 */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24 */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25 */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26 */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27 */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28 */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29 */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30 */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31 */
-
-/* CAN_MBTD Masks					 */
-#define	TDPTR		0x001F	/* Mailbox To Temporarily Disable */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge */
-#define	TDR			0x0080	/* Temporary Disable Request */
-
-/* CAN_RFH1 Masks											 */
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
-
-/* CAN_RFH2 Masks											 */
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
-
-/* CAN_MBTIF1 Masks						 */
-#define	MBTIF0		0x0001	/* TX Interrupt	Active In Mailbox 0 */
-#define	MBTIF1		0x0002	/* TX Interrupt	Active In Mailbox 1 */
-#define	MBTIF2		0x0004	/* TX Interrupt	Active In Mailbox 2 */
-#define	MBTIF3		0x0008	/* TX Interrupt	Active In Mailbox 3 */
-#define	MBTIF4		0x0010	/* TX Interrupt	Active In Mailbox 4 */
-#define	MBTIF5		0x0020	/* TX Interrupt	Active In Mailbox 5 */
-#define	MBTIF6		0x0040	/* TX Interrupt	Active In Mailbox 6 */
-#define	MBTIF7		0x0080	/* TX Interrupt	Active In Mailbox 7 */
-#define	MBTIF8		0x0100	/* TX Interrupt	Active In Mailbox 8 */
-#define	MBTIF9		0x0200	/* TX Interrupt	Active In Mailbox 9 */
-#define	MBTIF10		0x0400	/* TX Interrupt	Active In Mailbox 10 */
-#define	MBTIF11		0x0800	/* TX Interrupt	Active In Mailbox 11 */
-#define	MBTIF12		0x1000	/* TX Interrupt	Active In Mailbox 12 */
-#define	MBTIF13		0x2000	/* TX Interrupt	Active In Mailbox 13 */
-#define	MBTIF14		0x4000	/* TX Interrupt	Active In Mailbox 14 */
-#define	MBTIF15		0x8000	/* TX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBTIF2 Masks						 */
-#define	MBTIF16		0x0001	/* TX Interrupt	Active In Mailbox 16 */
-#define	MBTIF17		0x0002	/* TX Interrupt	Active In Mailbox 17 */
-#define	MBTIF18		0x0004	/* TX Interrupt	Active In Mailbox 18 */
-#define	MBTIF19		0x0008	/* TX Interrupt	Active In Mailbox 19 */
-#define	MBTIF20		0x0010	/* TX Interrupt	Active In Mailbox 20 */
-#define	MBTIF21		0x0020	/* TX Interrupt	Active In Mailbox 21 */
-#define	MBTIF22		0x0040	/* TX Interrupt	Active In Mailbox 22 */
-#define	MBTIF23		0x0080	/* TX Interrupt	Active In Mailbox 23 */
-#define	MBTIF24		0x0100	/* TX Interrupt	Active In Mailbox 24 */
-#define	MBTIF25		0x0200	/* TX Interrupt	Active In Mailbox 25 */
-#define	MBTIF26		0x0400	/* TX Interrupt	Active In Mailbox 26 */
-#define	MBTIF27		0x0800	/* TX Interrupt	Active In Mailbox 27 */
-#define	MBTIF28		0x1000	/* TX Interrupt	Active In Mailbox 28 */
-#define	MBTIF29		0x2000	/* TX Interrupt	Active In Mailbox 29 */
-#define	MBTIF30		0x4000	/* TX Interrupt	Active In Mailbox 30 */
-#define	MBTIF31		0x8000	/* TX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBRIF1 Masks						 */
-#define	MBRIF0		0x0001	/* RX Interrupt	Active In Mailbox 0 */
-#define	MBRIF1		0x0002	/* RX Interrupt	Active In Mailbox 1 */
-#define	MBRIF2		0x0004	/* RX Interrupt	Active In Mailbox 2 */
-#define	MBRIF3		0x0008	/* RX Interrupt	Active In Mailbox 3 */
-#define	MBRIF4		0x0010	/* RX Interrupt	Active In Mailbox 4 */
-#define	MBRIF5		0x0020	/* RX Interrupt	Active In Mailbox 5 */
-#define	MBRIF6		0x0040	/* RX Interrupt	Active In Mailbox 6 */
-#define	MBRIF7		0x0080	/* RX Interrupt	Active In Mailbox 7 */
-#define	MBRIF8		0x0100	/* RX Interrupt	Active In Mailbox 8 */
-#define	MBRIF9		0x0200	/* RX Interrupt	Active In Mailbox 9 */
-#define	MBRIF10		0x0400	/* RX Interrupt	Active In Mailbox 10 */
-#define	MBRIF11		0x0800	/* RX Interrupt	Active In Mailbox 11 */
-#define	MBRIF12		0x1000	/* RX Interrupt	Active In Mailbox 12 */
-#define	MBRIF13		0x2000	/* RX Interrupt	Active In Mailbox 13 */
-#define	MBRIF14		0x4000	/* RX Interrupt	Active In Mailbox 14 */
-#define	MBRIF15		0x8000	/* RX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBRIF2 Masks						 */
-#define	MBRIF16		0x0001	/* RX Interrupt	Active In Mailbox 16 */
-#define	MBRIF17		0x0002	/* RX Interrupt	Active In Mailbox 17 */
-#define	MBRIF18		0x0004	/* RX Interrupt	Active In Mailbox 18 */
-#define	MBRIF19		0x0008	/* RX Interrupt	Active In Mailbox 19 */
-#define	MBRIF20		0x0010	/* RX Interrupt	Active In Mailbox 20 */
-#define	MBRIF21		0x0020	/* RX Interrupt	Active In Mailbox 21 */
-#define	MBRIF22		0x0040	/* RX Interrupt	Active In Mailbox 22 */
-#define	MBRIF23		0x0080	/* RX Interrupt	Active In Mailbox 23 */
-#define	MBRIF24		0x0100	/* RX Interrupt	Active In Mailbox 24 */
-#define	MBRIF25		0x0200	/* RX Interrupt	Active In Mailbox 25 */
-#define	MBRIF26		0x0400	/* RX Interrupt	Active In Mailbox 26 */
-#define	MBRIF27		0x0800	/* RX Interrupt	Active In Mailbox 27 */
-#define	MBRIF28		0x1000	/* RX Interrupt	Active In Mailbox 28 */
-#define	MBRIF29		0x2000	/* RX Interrupt	Active In Mailbox 29 */
-#define	MBRIF30		0x4000	/* RX Interrupt	Active In Mailbox 30 */
-#define	MBRIF31		0x8000	/* RX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBIM1 Masks					 */
-#define	MBIM0		0x0001	/* Enable Interrupt For	Mailbox	0 */
-#define	MBIM1		0x0002	/* Enable Interrupt For	Mailbox	1 */
-#define	MBIM2		0x0004	/* Enable Interrupt For	Mailbox	2 */
-#define	MBIM3		0x0008	/* Enable Interrupt For	Mailbox	3 */
-#define	MBIM4		0x0010	/* Enable Interrupt For	Mailbox	4 */
-#define	MBIM5		0x0020	/* Enable Interrupt For	Mailbox	5 */
-#define	MBIM6		0x0040	/* Enable Interrupt For	Mailbox	6 */
-#define	MBIM7		0x0080	/* Enable Interrupt For	Mailbox	7 */
-#define	MBIM8		0x0100	/* Enable Interrupt For	Mailbox	8 */
-#define	MBIM9		0x0200	/* Enable Interrupt For	Mailbox	9 */
-#define	MBIM10		0x0400	/* Enable Interrupt For	Mailbox	10 */
-#define	MBIM11		0x0800	/* Enable Interrupt For	Mailbox	11 */
-#define	MBIM12		0x1000	/* Enable Interrupt For	Mailbox	12 */
-#define	MBIM13		0x2000	/* Enable Interrupt For	Mailbox	13 */
-#define	MBIM14		0x4000	/* Enable Interrupt For	Mailbox	14 */
-#define	MBIM15		0x8000	/* Enable Interrupt For	Mailbox	15 */
-
-/* CAN_MBIM2 Masks					 */
-#define	MBIM16		0x0001	/* Enable Interrupt For	Mailbox	16 */
-#define	MBIM17		0x0002	/* Enable Interrupt For	Mailbox	17 */
-#define	MBIM18		0x0004	/* Enable Interrupt For	Mailbox	18 */
-#define	MBIM19		0x0008	/* Enable Interrupt For	Mailbox	19 */
-#define	MBIM20		0x0010	/* Enable Interrupt For	Mailbox	20 */
-#define	MBIM21		0x0020	/* Enable Interrupt For	Mailbox	21 */
-#define	MBIM22		0x0040	/* Enable Interrupt For	Mailbox	22 */
-#define	MBIM23		0x0080	/* Enable Interrupt For	Mailbox	23 */
-#define	MBIM24		0x0100	/* Enable Interrupt For	Mailbox	24 */
-#define	MBIM25		0x0200	/* Enable Interrupt For	Mailbox	25 */
-#define	MBIM26		0x0400	/* Enable Interrupt For	Mailbox	26 */
-#define	MBIM27		0x0800	/* Enable Interrupt For	Mailbox	27 */
-#define	MBIM28		0x1000	/* Enable Interrupt For	Mailbox	28 */
-#define	MBIM29		0x2000	/* Enable Interrupt For	Mailbox	29 */
-#define	MBIM30		0x4000	/* Enable Interrupt For	Mailbox	30 */
-#define	MBIM31		0x8000	/* Enable Interrupt For	Mailbox	31 */
-
-/* CAN_GIM Masks									 */
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt */
-#define	EPIM		0x0004	/* Enable Error-Passive	Mode Interrupt */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
-#define	AAIM		0x0040	/* Enable Abort	Acknowledge Interrupt */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
-#define	ADIM		0x0400	/* Enable Access Denied	Interrupt */
-
-/* CAN_GIS Masks								 */
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status */
-#define	BOIS		0x0008	/* Bus Off IRQ Status */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status */
-#define	ADIS		0x0400	/* Access Denied IRQ Status */
-
-/* CAN_GIF Masks								 */
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag	 */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag	 */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag */
-
-/* CAN_UCCNF Masks								 */
-#define	UCCNF		0x000F	/* Universal Counter Mode */
-#define	UC_STAMP	0x0001	/*		Timestamp Mode */
-#define	UC_WDOG		0x0002	/*		Watchdog Mode */
-#define	UC_AUTOTX	0x0003	/*		Auto-Transmit Mode */
-#define	UC_ERROR	0x0006	/*		CAN Error Frame	Count */
-#define	UC_OVER		0x0007	/*		CAN Overload Frame Count */
-#define	UC_LOST		0x0008	/*		Arbitration Lost During	TX Count */
-#define	UC_AA		0x0009	/*		TX Abort Count */
-#define	UC_TA		0x000A	/*		TX Successful Count */
-#define	UC_REJECT	0x000B	/*		RX Message Rejected Count */
-#define	UC_RML		0x000C	/*		RX Message Lost	Count */
-#define	UC_RX		0x000D	/*		Total Successful RX Messages Count */
-#define	UC_RMP		0x000E	/*		Successful RX W/Matching ID Count */
-#define	UC_ALL		0x000F	/*		Correct	Message	On CAN Bus Line	Count */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger */
-#define	UCE			0x0080	/* Universal Counter Enable */
-
-/* CAN_ESR Masks			 */
-#define	ACKE		0x0004	/* Acknowledge Error */
-#define	SER			0x0008	/* Stuff Error */
-#define	CRCE		0x0010	/* CRC Error */
-#define	SA0			0x0020	/* Stuck At Dominant Error */
-#define	BEF			0x0040	/* Bit Error Flag */
-#define	FER			0x0080	/* Form	Error Flag */
-
-/* CAN_EWR Masks					 */
-#define	EWLREC		0x00FF	/* RX Error Count Limit	(For EWRIS) */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit	(For EWTIS) */
-
 #endif /* _DEF_BF539_H */
diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h
index a4b7fcb..7a479d2 100644
--- a/arch/blackfin/mach-bf538/include/mach/irq.h
+++ b/arch/blackfin/mach-bf538/include/mach/irq.h
@@ -110,7 +110,8 @@
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#define NR_IRQS     (IRQ_PF15+1)
+#define NR_MACH_IRQS	(IRQ_PF15 + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7            7
 #define IVG8            8
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ccdcd6d..dbb6b1d 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -127,44 +127,211 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
 	{
-		.start = 0xFFC03100,
-		.end = 0xFFC031FF,
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -331,6 +498,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PH6,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -359,6 +530,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
 	{
@@ -752,7 +1062,18 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -782,6 +1103,21 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 	&musb_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 	&bfin_atapi_device,
 #endif
@@ -833,3 +1169,42 @@ static int __init cm_bf548_init(void)
 }
 
 arch_initcall(cm_bf548_init);
+
+static struct platform_device *cm_bf548_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf548_early_devices,
+		ARRAY_SIZE(cm_bf548_early_devices));
+}
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 60193f7..6fcfb91 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -232,44 +232,211 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = UART0_DLL,
+		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
 	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
+		.start = UART1_DLL,
+		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PE10,
+		.end = GPIO_PE10,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PE9,
+		.end = GPIO_PE9,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX,
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	P_UART1_RTS, P_UART1_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
+static struct resource bfin_uart2_resources[] = {
 	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
+		.start = UART2_DLL,
+		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_RX,
+		.end = IRQ_UART2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART2_ERROR,
+		.end = IRQ_UART2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART2_TX,
+		.end = CH_UART2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART2_RX,
+		.end = CH_UART2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart2_peripherals[] = {
+	P_UART2_TX, P_UART2_RX, 0
+};
+
+static struct platform_device bfin_uart2_device = {
+	.name = "bfin-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
+	.resource = bfin_uart2_resources,
+	.dev = {
+		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
+	},
+};
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART3
+static struct resource bfin_uart3_resources[] = {
 	{
-		.start = 0xFFC03100,
-		.end = 0xFFC031FF,
+		.start = UART3_DLL,
+		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_RX,
+		.end = IRQ_UART3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART3_ERROR,
+		.end = IRQ_UART3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART3_TX,
+		.end = CH_UART3_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART3_RX,
+		.end = CH_UART3_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	{	/* CTS pin -- 0 means not supported */
+		.start = GPIO_PB3,
+		.end = GPIO_PB3,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin -- 0 means not supported */
+		.start = GPIO_PB2,
+		.end = GPIO_PB2,
+		.flags = IORESOURCE_IO,
+	},
 #endif
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart3_peripherals[] = {
+	P_UART3_TX, P_UART3_RX,
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	P_UART3_RTS, P_UART3_CTS,
+#endif
+	0
+};
+
+static struct platform_device bfin_uart3_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_uart3_resources),
+	.resource = bfin_uart3_resources,
+	.dev = {
+		.platform_data = &bfin_uart3_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -436,6 +603,10 @@ static struct musb_hdrc_config musb_config = {
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PE7,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
@@ -464,6 +635,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+	{
+		.start = SPORT2_TCR1,
+		.end = SPORT2_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT2_RX,
+		.end = IRQ_SPORT2_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT2_ERROR,
+		.end = IRQ_SPORT2_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+	.resource = bfin_sport2_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+	{
+		.start = SPORT3_TCR1,
+		.end = SPORT3_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT3_RX,
+		.end = IRQ_SPORT3_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT3_ERROR,
+		.end = IRQ_SPORT3_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+	.resource = bfin_sport3_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
 	P_CAN0_RX, P_CAN0_TX, 0
@@ -657,8 +967,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -714,8 +1024,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -951,6 +1261,30 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -960,7 +1294,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -994,6 +1339,21 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_isp1760_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 	&bfin_can_device,
 #endif
@@ -1037,6 +1397,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -1058,3 +1430,42 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	&bfin_uart2_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	&bfin_uart3_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+	&bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+	&bfin_sport3_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index ab04d13..0ed06c2 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -2104,677 +2104,6 @@
 
 #define                    ECCCNT  0x3ff      /* Transfer Count */
 
-/* Bit masks for CAN0_CONTROL */
-
-#define                       SRS  0x1        /* Software Reset */
-#define                       DNM  0x2        /* DeviceNet Mode */
-#define                       ABO  0x4        /* Auto Bus On */
-#define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
-#define                       SMR  0x20       /* Sleep Mode Request */
-#define                       CSR  0x40       /* CAN Suspend Mode Request */
-#define                       CCR  0x80       /* CAN Configuration Mode Request */
-
-/* Bit masks for CAN0_STATUS */
-
-#define                        WT  0x1        /* CAN Transmit Warning Flag */
-#define                        WR  0x2        /* CAN Receive Warning Flag */
-#define                        EP  0x4        /* CAN Error Passive Mode */
-#define                       EBO  0x8        /* CAN Error Bus Off Mode */
-#define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
-#define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
-#define                     MBPTR  0x1f00     /* Mailbox Pointer */
-#define                       TRM  0x4000     /* Transmit Mode Status */
-#define                       REC  0x8000     /* Receive Mode Status */
-
-/* Bit masks for CAN0_DEBUG */
-
-#define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
-#define                       DRI  0x2        /* Disable CANRX Input Pin */
-#define                       DTO  0x4        /* Disable CANTX Output Pin */
-#define                       DIL  0x8        /* Disable Internal Loop */
-#define                       MAA  0x10       /* Mode Auto-Acknowledge */
-#define                       MRB  0x20       /* Mode Read Back */
-#define                       CDE  0x8000     /* CAN Debug Mode Enable */
-
-/* Bit masks for CAN0_CLOCK */
-
-#define                       BRP  0x3ff      /* CAN Bit Rate Prescaler */
-
-/* Bit masks for CAN0_TIMING */
-
-#define                       SJW  0x300      /* Synchronization Jump Width */
-#define                       SAM  0x80       /* Sampling */
-#define                     TSEG2  0x70       /* Time Segment 2 */
-#define                     TSEG1  0xf        /* Time Segment 1 */
-
-/* Bit masks for CAN0_INTR */
-
-#define                     CANRX  0x80       /* Serial Input From Transceiver */
-#define                     CANTX  0x40       /* Serial Output To Transceiver */
-#define                     SMACK  0x8        /* Sleep Mode Acknowledge */
-#define                      GIRQ  0x4        /* Global Interrupt Request Status */
-#define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
-#define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
-
-/* Bit masks for CAN0_GIM */
-
-#define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
-#define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
-#define                      EPIM  0x4        /* Error Passive Interrupt Mask */
-#define                      BOIM  0x8        /* Bus Off Interrupt Mask */
-#define                      WUIM  0x10       /* Wakeup Interrupt Mask */
-#define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
-#define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
-#define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
-#define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
-#define                      ADIM  0x400      /* Access Denied Interrupt Mask */
-
-/* Bit masks for CAN0_GIS */
-
-#define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
-#define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
-#define                      EPIS  0x4        /* Error Passive Interrupt Status */
-#define                      BOIS  0x8        /* Bus Off Interrupt Status */
-#define                      WUIS  0x10       /* Wakeup Interrupt Status */
-#define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
-#define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
-#define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
-#define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
-#define                      ADIS  0x400      /* Access Denied Interrupt Status */
-
-/* Bit masks for CAN0_GIF */
-
-#define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
-#define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
-#define                      EPIF  0x4        /* Error Passive Interrupt Flag */
-#define                      BOIF  0x8        /* Bus Off Interrupt Flag */
-#define                      WUIF  0x10       /* Wakeup Interrupt Flag */
-#define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
-#define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
-#define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
-#define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
-#define                      ADIF  0x400      /* Access Denied Interrupt Flag */
-
-/* Bit masks for CAN0_MBTD */
-
-#define                       TDR  0x80       /* Temporary Disable Request */
-#define                       TDA  0x40       /* Temporary Disable Acknowledge */
-#define                     TDPTR  0x1f       /* Temporary Disable Pointer */
-
-/* Bit masks for CAN0_UCCNF */
-
-#define                     UCCNF  0xf        /* Universal Counter Configuration */
-#define                      UCRC  0x20       /* Universal Counter Reload/Clear */
-#define                      UCCT  0x40       /* Universal Counter CAN Trigger */
-#define                       UCE  0x80       /* Universal Counter Enable */
-
-/* Bit masks for CAN0_CEC */
-
-#define                    RXECNT  0xff       /* Receive Error Counter */
-#define                    TXECNT  0xff00     /* Transmit Error Counter */
-
-/* Bit masks for CAN0_ESR */
-
-#define                       FER  0x80       /* Form Error */
-#define                       BEF  0x40       /* Bit Error Flag */
-#define                       SA0  0x20       /* Stuck At Dominant */
-#define                      CRCE  0x10       /* CRC Error */
-#define                       SER  0x8        /* Stuff Bit Error */
-#define                      ACKE  0x4        /* Acknowledge Error */
-
-/* Bit masks for CAN0_EWR */
-
-#define                    EWLTEC  0xff00     /* Transmit Error Warning Limit */
-#define                    EWLREC  0xff       /* Receive Error Warning Limit */
-
-/* Bit masks for CAN0_AMxx_H */
-
-#define                       FDF  0x8000     /* Filter On Data Field */
-#define                       FMD  0x4000     /* Full Mask Data */
-#define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_AMxx_L */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_ID1 */
-
-#define                       AME  0x8000     /* Acceptance Mask Enable */
-#define                       RTR  0x4000     /* Remote Transmission Request */
-#define                       IDE  0x2000     /* Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_MBxx_ID0 */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_TIMESTAMP */
-
-#define                       TSV  0xffff     /* Time Stamp Value */
-
-/* Bit masks for CAN0_MBxx_LENGTH */
-
-#define                       DLC  0xf        /* Data Length Code */
-
-/* Bit masks for CAN0_MBxx_DATA3 */
-
-#define                 CAN_BYTE0  0xff00     /* Data Field Byte 0 */
-#define                 CAN_BYTE1  0xff       /* Data Field Byte 1 */
-
-/* Bit masks for CAN0_MBxx_DATA2 */
-
-#define                 CAN_BYTE2  0xff00     /* Data Field Byte 2 */
-#define                 CAN_BYTE3  0xff       /* Data Field Byte 3 */
-
-/* Bit masks for CAN0_MBxx_DATA1 */
-
-#define                 CAN_BYTE4  0xff00     /* Data Field Byte 4 */
-#define                 CAN_BYTE5  0xff       /* Data Field Byte 5 */
-
-/* Bit masks for CAN0_MBxx_DATA0 */
-
-#define                 CAN_BYTE6  0xff00     /* Data Field Byte 6 */
-#define                 CAN_BYTE7  0xff       /* Data Field Byte 7 */
-
-/* Bit masks for CAN0_MC1 */
-
-#define                       MC0  0x1        /* Mailbox 0 Enable */
-#define                       MC1  0x2        /* Mailbox 1 Enable */
-#define                       MC2  0x4        /* Mailbox 2 Enable */
-#define                       MC3  0x8        /* Mailbox 3 Enable */
-#define                       MC4  0x10       /* Mailbox 4 Enable */
-#define                       MC5  0x20       /* Mailbox 5 Enable */
-#define                       MC6  0x40       /* Mailbox 6 Enable */
-#define                       MC7  0x80       /* Mailbox 7 Enable */
-#define                       MC8  0x100      /* Mailbox 8 Enable */
-#define                       MC9  0x200      /* Mailbox 9 Enable */
-#define                      MC10  0x400      /* Mailbox 10 Enable */
-#define                      MC11  0x800      /* Mailbox 11 Enable */
-#define                      MC12  0x1000     /* Mailbox 12 Enable */
-#define                      MC13  0x2000     /* Mailbox 13 Enable */
-#define                      MC14  0x4000     /* Mailbox 14 Enable */
-#define                      MC15  0x8000     /* Mailbox 15 Enable */
-
-/* Bit masks for CAN0_MC2 */
-
-#define                      MC16  0x1        /* Mailbox 16 Enable */
-#define                      MC17  0x2        /* Mailbox 17 Enable */
-#define                      MC18  0x4        /* Mailbox 18 Enable */
-#define                      MC19  0x8        /* Mailbox 19 Enable */
-#define                      MC20  0x10       /* Mailbox 20 Enable */
-#define                      MC21  0x20       /* Mailbox 21 Enable */
-#define                      MC22  0x40       /* Mailbox 22 Enable */
-#define                      MC23  0x80       /* Mailbox 23 Enable */
-#define                      MC24  0x100      /* Mailbox 24 Enable */
-#define                      MC25  0x200      /* Mailbox 25 Enable */
-#define                      MC26  0x400      /* Mailbox 26 Enable */
-#define                      MC27  0x800      /* Mailbox 27 Enable */
-#define                      MC28  0x1000     /* Mailbox 28 Enable */
-#define                      MC29  0x2000     /* Mailbox 29 Enable */
-#define                      MC30  0x4000     /* Mailbox 30 Enable */
-#define                      MC31  0x8000     /* Mailbox 31 Enable */
-
-/* Bit masks for CAN0_MD1 */
-
-#define                       MD0  0x1        /* Mailbox 0 Receive Enable */
-#define                       MD1  0x2        /* Mailbox 1 Receive Enable */
-#define                       MD2  0x4        /* Mailbox 2 Receive Enable */
-#define                       MD3  0x8        /* Mailbox 3 Receive Enable */
-#define                       MD4  0x10       /* Mailbox 4 Receive Enable */
-#define                       MD5  0x20       /* Mailbox 5 Receive Enable */
-#define                       MD6  0x40       /* Mailbox 6 Receive Enable */
-#define                       MD7  0x80       /* Mailbox 7 Receive Enable */
-#define                       MD8  0x100      /* Mailbox 8 Receive Enable */
-#define                       MD9  0x200      /* Mailbox 9 Receive Enable */
-#define                      MD10  0x400      /* Mailbox 10 Receive Enable */
-#define                      MD11  0x800      /* Mailbox 11 Receive Enable */
-#define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
-#define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
-#define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
-#define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
-
-/* Bit masks for CAN0_MD2 */
-
-#define                      MD16  0x1        /* Mailbox 16 Receive Enable */
-#define                      MD17  0x2        /* Mailbox 17 Receive Enable */
-#define                      MD18  0x4        /* Mailbox 18 Receive Enable */
-#define                      MD19  0x8        /* Mailbox 19 Receive Enable */
-#define                      MD20  0x10       /* Mailbox 20 Receive Enable */
-#define                      MD21  0x20       /* Mailbox 21 Receive Enable */
-#define                      MD22  0x40       /* Mailbox 22 Receive Enable */
-#define                      MD23  0x80       /* Mailbox 23 Receive Enable */
-#define                      MD24  0x100      /* Mailbox 24 Receive Enable */
-#define                      MD25  0x200      /* Mailbox 25 Receive Enable */
-#define                      MD26  0x400      /* Mailbox 26 Receive Enable */
-#define                      MD27  0x800      /* Mailbox 27 Receive Enable */
-#define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
-#define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
-#define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
-#define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
-
-/* Bit masks for CAN0_RMP1 */
-
-#define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
-#define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
-#define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
-#define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
-#define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
-#define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
-#define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
-#define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
-#define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
-#define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
-#define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
-#define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
-#define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
-#define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
-#define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
-#define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
-
-/* Bit masks for CAN0_RMP2 */
-
-#define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
-#define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
-#define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
-#define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
-#define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
-#define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
-#define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
-#define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
-#define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
-#define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
-#define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
-#define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
-#define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
-#define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
-#define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
-#define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
-
-/* Bit masks for CAN0_RML1 */
-
-#define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
-#define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
-#define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
-#define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
-#define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
-#define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
-#define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
-#define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
-#define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
-#define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
-#define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
-#define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
-#define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
-#define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
-#define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
-#define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
-
-/* Bit masks for CAN0_RML2 */
-
-#define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
-#define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
-#define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
-#define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
-#define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
-#define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
-#define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
-#define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
-#define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
-#define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
-#define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
-#define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
-#define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
-#define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
-#define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
-#define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
-
-/* Bit masks for CAN0_OPSS1 */
-
-#define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_OPSS2 */
-
-#define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_TRS1 */
-
-#define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
-#define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
-#define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
-#define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
-#define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
-#define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
-#define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
-#define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
-#define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
-#define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
-#define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
-#define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
-#define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
-#define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
-#define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
-#define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
-
-/* Bit masks for CAN0_TRS2 */
-
-#define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
-#define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
-#define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
-#define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
-#define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
-#define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
-#define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
-#define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
-#define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
-#define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
-#define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
-#define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
-#define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
-#define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
-#define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
-#define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
-
-/* Bit masks for CAN0_TRR1 */
-
-#define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
-#define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
-#define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
-#define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
-#define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
-#define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
-#define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
-#define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
-#define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
-#define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
-#define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
-#define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
-#define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
-#define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
-#define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
-#define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
-
-/* Bit masks for CAN0_TRR2 */
-
-#define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
-#define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
-#define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
-#define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
-#define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
-#define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
-#define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
-#define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
-#define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
-#define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
-#define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
-#define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
-#define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
-#define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
-#define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
-#define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
-
-/* Bit masks for CAN0_AA1 */
-
-#define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
-#define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
-#define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
-#define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
-#define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
-#define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
-#define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
-#define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
-#define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
-#define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
-#define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
-#define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
-#define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
-#define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
-#define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
-#define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
-
-/* Bit masks for CAN0_AA2 */
-
-#define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
-#define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
-#define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
-#define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
-#define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
-#define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
-#define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
-#define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
-#define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
-#define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
-#define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
-#define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
-#define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
-#define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
-#define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
-#define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
-
-/* Bit masks for CAN0_TA1 */
-
-#define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
-#define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
-#define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
-#define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
-#define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
-#define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
-#define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
-#define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
-#define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
-#define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
-#define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
-#define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
-#define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
-#define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
-#define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
-#define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
-
-/* Bit masks for CAN0_TA2 */
-
-#define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
-#define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
-#define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
-#define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
-#define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
-#define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
-#define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
-#define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
-#define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
-#define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
-#define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
-#define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
-#define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
-#define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
-#define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
-#define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
-
-/* Bit masks for CAN0_RFH1 */
-
-#define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
-#define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
-#define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
-#define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
-#define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
-#define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
-#define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
-#define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
-#define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
-#define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
-#define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
-#define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
-#define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
-#define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
-#define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
-#define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_RFH2 */
-
-#define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
-#define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
-#define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
-#define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
-#define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
-#define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
-#define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
-#define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
-#define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
-#define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
-#define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
-#define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
-#define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
-#define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
-#define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
-#define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_MBIM1 */
-
-#define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
-#define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
-#define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
-#define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
-#define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
-#define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
-#define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
-#define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
-#define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
-#define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
-#define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
-#define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
-#define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
-#define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
-#define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
-#define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBIM2 */
-
-#define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
-#define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
-#define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
-#define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
-#define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
-#define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
-#define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
-#define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
-#define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
-#define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
-#define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
-#define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
-#define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
-#define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
-#define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
-#define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBTIF1 */
-
-#define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBTIF2 */
-
-#define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF1 */
-
-#define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF2 */
-
-#define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 106db05..1f99b51 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -317,7 +317,8 @@ Events         (highest priority)  EMU         0
 
 #define GPIO_IRQ_BASE	IRQ_PA0
 
-#define NR_IRQS     (IRQ_PJ15+1)
+#define NR_MACH_IRQS	(IRQ_PJ15 + 1)
+#define NR_IRQS		(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 /* For compatibility reasons with existing code */
 
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
index 59e18af..b340297 100644
--- a/arch/blackfin/mach-bf561/Makefile
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -6,3 +6,4 @@ obj-y := ints-priority.o dma.o
 
 obj-$(CONFIG_BF561_COREB) += coreb.o
 obj-$(CONFIG_SMP)  += smp.o secondary.o atomic.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 07e8dc8..bfcfa86 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -44,6 +44,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -112,7 +113,7 @@ static struct resource bfin_i2c_pca_resources[] = {
 struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
 	.gpio = -1,
 	.i2c_clock_speed = 330000,
-	.timeout = 10000
+	.timeout = HZ,
 };
 
 /* PCA9564 I2C Bus driver */
@@ -176,7 +177,7 @@ static struct resource smsc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_config = {
-	.flags = SMSC911X_USE_32BIT,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index dfc8d5b..e127aed 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -111,7 +111,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -305,21 +305,50 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -463,7 +492,9 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -516,3 +547,18 @@ static int __init cm_bf561_init(void)
 }
 
 arch_initcall(cm_bf561_init);
+
+static struct platform_device *cm_bf561_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf561_early_devices,
+		ARRAY_SIZE(cm_bf561_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index ffd3e6a..9b93e2f 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -160,21 +160,50 @@ static struct platform_device smc91x_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
 	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_uart_device = {
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
 	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -245,8 +274,8 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -299,8 +328,8 @@ static struct platform_device bfin_spi0_device = {
 #endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BLACKFIN_AD183X) \
+	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
 	{
 		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -412,7 +441,9 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
@@ -458,3 +489,18 @@ static int __init ezkit_init(void)
 }
 
 arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
index 8ba7252..d3017e5 100644
--- a/arch/blackfin/mach-bf561/boards/tepla.c
+++ b/arch/blackfin/mach-bf561/boards/tepla.c
@@ -42,6 +42,52 @@ static struct platform_device smc91x_device = {
 	.resource      = smc91x_resources,
 };
 
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART_RX,
+		.end = IRQ_UART_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART_ERROR,
+		.end = IRQ_UART_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART_TX,
+		.end = CH_UART_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART_RX,
+		.end = CH_UART_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
@@ -73,6 +119,13 @@ static struct platform_device bfin_sir0_device = {
 
 static struct platform_device *tepla_devices[] __initdata = {
 	&smc91x_device,
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
@@ -87,3 +140,18 @@ static int __init tepla_init(void)
 }
 
 arch_initcall(tepla_init);
+
+static struct platform_device *tepla_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tepla_early_devices,
+		ARRAY_SIZE(tepla_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/hotplug.c b/arch/blackfin/mach-bf561/hotplug.c
new file mode 100644
index 0000000..c95169b
--- /dev/null
+++ b/arch/blackfin/mach-bf561/hotplug.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *               Graff Yang <graf.yang@analog.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/smp.h>
+#define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
+
+int hotplug_coreb;
+
+void platform_cpu_die(void)
+{
+	unsigned long iwr[2] = {0, 0};
+	unsigned long bank = SIC_SYSIRQ(IRQ_SUPPLE_0) / 32;
+	unsigned long bit = 1 << (SIC_SYSIRQ(IRQ_SUPPLE_0) % 32);
+
+	hotplug_coreb = 1;
+
+	iwr[bank] = bit;
+
+	/* disable core timer */
+	bfin_write_TCNTL(0);
+
+	/* clear ipi interrupt IRQ_SUPPLE_0 */
+	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + 1)));
+	SSYNC();
+
+	coreb_sleep(iwr[0], iwr[1], 0);
+}
diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
index 7b208db..c95566a 100644
--- a/arch/blackfin/mach-bf561/include/mach/irq.h
+++ b/arch/blackfin/mach-bf561/include/mach/irq.h
@@ -265,7 +265,8 @@
 
 #define GPIO_IRQ_BASE		IRQ_PF0
 
-#define NR_IRQS			(IRQ_PF47 + 1)
+#define NR_MACH_IRQS		(IRQ_PF47 + 1)
+#define NR_IRQS			(NR_MACH_IRQS + NR_SPARE_IRQS)
 
 #define IVG7			7
 #define IVG8			8
diff --git a/arch/blackfin/mach-bf561/include/mach/smp.h b/arch/blackfin/mach-bf561/include/mach/smp.h
index 390c7f4..2c8c514 100644
--- a/arch/blackfin/mach-bf561/include/mach/smp.h
+++ b/arch/blackfin/mach-bf561/include/mach/smp.h
@@ -25,4 +25,6 @@ void platform_send_ipi_cpu(unsigned int cpu);
 
 void platform_clear_ipi(unsigned int cpu);
 
+void bfin_local_timer_setup(void);
+
 #endif /* !_MACH_BF561_SMP */
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 8e60503..4624eeb 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/asm-offsets.h>
+#include <asm/trace.h>
 
 __INIT
 
@@ -62,6 +63,8 @@ ENTRY(_coreb_trampoline_start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_init(p0,r0);
+
 	/* Turn off the icache */
 	p0.l = LO(IMEM_CONTROL);
 	p0.h = HI(IMEM_CONTROL);
@@ -159,6 +162,41 @@ ENTRY(_coreb_trampoline_start)
 ENDPROC(_coreb_trampoline_start)
 ENTRY(_coreb_trampoline_end)
 
+.section ".text"
+ENTRY(_set_sicb_iwr)
+	P0.H = hi(SICB_IWR0);
+	P0.L = lo(SICB_IWR0);
+	P1.H = hi(SICB_IWR1);
+	P1.L = lo(SICB_IWR1);
+	[P0] = R0;
+	[P1] = R1;
+	SSYNC;
+	RTS;
+ENDPROC(_set_sicb_iwr)
+
+ENTRY(_coreb_sleep)
+	sp.l = lo(INITIAL_STACK);
+	sp.h = hi(INITIAL_STACK);
+	fp = sp;
+	usp = sp;
+
+	call _set_sicb_iwr;
+
+	CLI R2;
+	SSYNC;
+	IDLE;
+	STI R2;
+
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	call _set_sicb_iwr;
+
+	p0.h = hi(COREB_L1_CODE_START);
+	p0.l = lo(COREB_L1_CODE_START);
+	jump (p0);
+ENDPROC(_coreb_sleep)
+
+__CPUINIT
 ENTRY(_coreb_start)
 	[--sp] = reti;
 
@@ -176,12 +214,20 @@ ENTRY(_coreb_start)
 	sp = [p0];
 	usp = sp;
 	fp = sp;
+#ifdef CONFIG_HOTPLUG_CPU
+	p0.l = _hotplug_coreb;
+	p0.h = _hotplug_coreb;
+	r0 = [p0];
+	cc = BITTST(r0, 0);
+	if cc jump 3f;
+#endif
 	sp += -12;
 	call _init_pda
 	sp += 12;
+#ifdef CONFIG_HOTPLUG_CPU
+3:
+#endif
 	call _secondary_start_kernel;
 .L_exit:
 	jump.s	.L_exit;
 ENDPROC(_coreb_start)
-
-__FINIT
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 0192532..3b9a4bf 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -11,11 +11,10 @@
 #include <linux/delay.h>
 #include <asm/smp.h>
 #include <asm/dma.h>
+#include <asm/time.h>
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static cpumask_t cpu_callin_map;
-
 /*
  * platform_init_cpus() - Tell the world about how many cores we
  * have. This is called while setting up the architecture support
@@ -66,13 +65,15 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	bfin_write_SICB_IAR5(bfin_read_SICA_IAR5());
 	bfin_write_SICB_IAR6(bfin_read_SICA_IAR6());
 	bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
+	bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
+	bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
 	SSYNC();
 
 	/* Store CPU-private information to the cpu_data array. */
 	bfin_setup_cpudata(cpu);
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
-	cpu_set(cpu, cpu_callin_map);
+	set_cpu_online(cpu, true);
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }
@@ -81,28 +82,28 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 {
 	unsigned long timeout;
 
-	/* CoreB already running?! */
-	BUG_ON((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0);
-
 	printk(KERN_INFO "Booting Core B.\n");
 
 	spin_lock(&boot_lock);
 
-	/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
-	SSYNC();
-	bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
-	SSYNC();
+	if ((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0) {
+		/* CoreB already running, sending ipi to wakeup it */
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
+	} else {
+		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
+		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
+		SSYNC();
+	}
 
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
-		if (cpu_isset(cpu, cpu_callin_map))
+		if (cpu_online(cpu))
 			break;
 		udelay(100);
 		barrier();
 	}
 
-	if (cpu_isset(cpu, cpu_callin_map)) {
-		cpu_set(cpu, cpu_online_map);
+	if (cpu_online(cpu)) {
 		/* release the lock and let coreb run */
 		spin_unlock(&boot_lock);
 		return 0;
@@ -147,3 +148,20 @@ void platform_clear_ipi(unsigned int cpu)
 	bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (10 + cpu)));
 	SSYNC();
 }
+
+/*
+ * Setup core B's local core timer.
+ * In SMP, core timer is used for clock event device.
+ */
+void __cpuinit bfin_local_timer_setup(void)
+{
+#if defined(CONFIG_TICKSOURCE_CORETMR)
+	bfin_coretmr_init();
+	bfin_coretmr_clockevent_init();
+	get_irq_chip(IRQ_CORETMR)->unmask(IRQ_CORETMR);
+#else
+	/* Power down the core timer, just to play safe. */
+	bfin_write_TCNTL(0);
+#endif
+
+}
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 7775828..4391d03 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -11,10 +11,13 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/fs.h>
+#include <linux/delay.h>
 #include <asm/blackfin.h>
 #include <asm/time.h>
 #include <asm/dpmc.h>
 
+#define CPUFREQ_CPU 0
+
 /* this is the table of CCLK frequencies, in Hz */
 /* .index is the entry in the auxillary dpm_state_table[] */
 static struct cpufreq_frequency_table bfin_freq_table[] = {
@@ -41,64 +44,124 @@ static struct bfin_dpm_state {
 	unsigned int tscale; /* change the divider on the core timer interrupt */
 } dpm_state_table[3];
 
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 /*
-   normalized to maximum frequncy offset for CYCLES,
-   used in time-ts cycles clock source, but could be used
-   somewhere also.
+ * normalized to maximum frequncy offset for CYCLES,
+ * used in time-ts cycles clock source, but could be used
+ * somewhere also.
  */
 unsigned long long __bfin_cycles_off;
 unsigned int __bfin_cycles_mod;
+#endif
 
 /**************************************************************************/
+static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
+{
 
-static unsigned int bfin_getfreq_khz(unsigned int cpu)
+	unsigned long csel, min_cclk;
+	int index;
+
+	/* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
+#if ANOMALY_05000273 || ANOMALY_05000274 || \
+	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
+	min_cclk = sclk * 2;
+#else
+	min_cclk = sclk;
+#endif
+	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
+
+	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
+		bfin_freq_table[index].frequency = cclk >> index;
+		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
+		dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
+
+		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
+						 bfin_freq_table[index].frequency,
+						 dpm_state_table[index].csel,
+						 dpm_state_table[index].tscale);
+	}
+	return;
+}
+
+static void bfin_adjust_core_timer(void *info)
 {
-	/* The driver only support single cpu */
-	if (cpu != 0)
-		return -1;
+	unsigned int tscale;
+	unsigned int index = *(unsigned int *)info;
 
-	return get_cclk() / 1000;
+	/* we have to adjust the core timer, because it is using cclk */
+	tscale = dpm_state_table[index].tscale;
+	bfin_write_TSCALE(tscale);
+	return;
 }
 
+static unsigned int bfin_getfreq_khz(unsigned int cpu)
+{
+	/* Both CoreA/B have the same core clock */
+	return get_cclk() / 1000;
+}
 
-static int bfin_target(struct cpufreq_policy *policy,
+static int bfin_target(struct cpufreq_policy *poli,
 			unsigned int target_freq, unsigned int relation)
 {
-	unsigned int index, plldiv, tscale;
+	unsigned int index, plldiv, cpu;
 	unsigned long flags, cclk_hz;
 	struct cpufreq_freqs freqs;
+	static unsigned long lpj_ref;
+	static unsigned int  lpj_ref_freq;
+
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 	cycles_t cycles;
+#endif
 
-	if (cpufreq_frequency_table_target(policy, bfin_freq_table,
-		 target_freq, relation, &index))
-		return -EINVAL;
-
-	cclk_hz = bfin_freq_table[index].frequency;
-
-	freqs.old = bfin_getfreq_khz(0);
-	freqs.new = cclk_hz;
-	freqs.cpu = 0;
-
-	pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
-		 cclk_hz, target_freq, freqs.old);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	local_irq_save_hw(flags);
-		plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
-		tscale = dpm_state_table[index].tscale;
-		bfin_write_PLL_DIV(plldiv);
-		/* we have to adjust the core timer, because it is using cclk */
-		bfin_write_TSCALE(tscale);
-		cycles = get_cycles();
-		SSYNC();
-	cycles += 10; /* ~10 cycles we lose after get_cycles() */
-	__bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
-	__bfin_cycles_mod = index;
-	local_irq_restore_hw(flags);
-	/* TODO: just test case for cycles clock source, remove later */
-	pr_debug("cpufreq: done\n");
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_online_cpu(cpu) {
+		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+
+		if (!policy)
+			continue;
+
+		if (cpufreq_frequency_table_target(policy, bfin_freq_table,
+				 target_freq, relation, &index))
+			return -EINVAL;
+
+		cclk_hz = bfin_freq_table[index].frequency;
+
+		freqs.old = bfin_getfreq_khz(0);
+		freqs.new = cclk_hz;
+		freqs.cpu = cpu;
+
+		pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
+			 cclk_hz, target_freq, freqs.old);
+
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		if (cpu == CPUFREQ_CPU) {
+			local_irq_save_hw(flags);
+			plldiv = (bfin_read_PLL_DIV() & SSEL) |
+						dpm_state_table[index].csel;
+			bfin_write_PLL_DIV(plldiv);
+			on_each_cpu(bfin_adjust_core_timer, &index, 1);
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+			cycles = get_cycles();
+			SSYNC();
+			cycles += 10; /* ~10 cycles we lose after get_cycles() */
+			__bfin_cycles_off +=
+			    (cycles << __bfin_cycles_mod) - (cycles << index);
+			__bfin_cycles_mod = index;
+#endif
+			if (!lpj_ref_freq) {
+				lpj_ref = loops_per_jiffy;
+				lpj_ref_freq = freqs.old;
+			}
+			if (freqs.new != freqs.old) {
+				loops_per_jiffy = cpufreq_scale(lpj_ref,
+						lpj_ref_freq, freqs.new);
+			}
+			local_irq_restore_hw(flags);
+		}
+		/* TODO: just test case for cycles clock source, remove later */
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	}
 
+	pr_debug("cpufreq: done\n");
 	return 0;
 }
 
@@ -110,37 +173,16 @@ static int bfin_verify_speed(struct cpufreq_policy *policy)
 static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
 {
 
-	unsigned long cclk, sclk, csel, min_cclk;
-	int index;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
+	unsigned long cclk, sclk;
 
 	cclk = get_cclk() / 1000;
 	sclk = get_sclk() / 1000;
 
-#if ANOMALY_05000273 || ANOMALY_05000274 || \
-	(!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
-	min_cclk = sclk * 2;
-#else
-	min_cclk = sclk;
-#endif
-	csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
-
-	for (index = 0;  (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
-		bfin_freq_table[index].frequency = cclk >> index;
-		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
-		dpm_state_table[index].tscale =  (TIME_SCALE / (1 << csel)) - 1;
-
-		pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
-						 bfin_freq_table[index].frequency,
-						 dpm_state_table[index].csel,
-						 dpm_state_table[index].tscale);
-	}
+	if (policy->cpu == CPUFREQ_CPU)
+		bfin_init_tables(cclk, sclk);
 
 	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
 
-	/*Now ,only support one cpu */
 	policy->cur = cclk;
 	cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
 	return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index b0ed0b4..a5847f5 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -405,7 +405,7 @@ ENTRY(_double_fault)
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _double_fault_c;
+	pseudo_long_call _double_fault_c, p5;
 	SP += 12;
 .L_double_fault_panic:
         JUMP .L_double_fault_panic
@@ -447,7 +447,7 @@ ENTRY(_exception_to_level5)
 
 	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _trap_c;
+	pseudo_long_call _trap_c, p4;
 	SP += 12;
 
 	/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
@@ -482,6 +482,8 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
 
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
 #ifdef CONFIG_EXACT_HWERR
 	/* Make sure all pending read/writes complete. This will ensure any
 	 * accesses which could cause hardware errors completes, and signal
@@ -492,8 +494,6 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	ssync;
 #endif
 
-	ANOMALY_283_315_WORKAROUND(p5, r7)
-
 #ifdef CONFIG_DEBUG_DOUBLEFAULT
 	/*
 	 * Save these registers, as they are only valid in exception context
@@ -551,7 +551,7 @@ ENTRY(_kernel_execve)
 	p0 = sp;
 	sp += -16;
 	[sp + 12] = p0;
-	call _do_execve;
+	pseudo_long_call _do_execve, p5;
 	SP += 16;
 	cc = r0 == 0;
 	if ! cc jump .Lexecve_failed;
@@ -626,13 +626,6 @@ ENTRY(_system_call)
 	p0 = [sp + PT_ORIG_P0];
 #endif /* CONFIG_IPIPE */
 
-	/* Check the System Call */
-	r7 = __NR_syscall;
-	/* System call number is passed in P0 */
-	r6 = p0;
-	cc = r6 < r7;
-	if ! cc jump .Lbadsys;
-
 	/* are we tracing syscalls?*/
 	r7 = sp;
 	r6.l = lo(ALIGN_PAGE_MASK);
@@ -642,6 +635,14 @@ ENTRY(_system_call)
 	r7 = [p2+TI_FLAGS];
 	CC = BITTST(r7,TIF_SYSCALL_TRACE);
 	if CC JUMP _sys_trace;
+	CC = BITTST(r7,TIF_SINGLESTEP);
+	if CC JUMP _sys_trace;
+
+	/* Make sure the system call # is valid */
+	p4 = __NR_syscall;
+	/* System call number is passed in P0 */
+	cc = p4 <= p0;
+	if cc jump .Lbadsys;
 
 	/* Execute the appropriate system call */
 
@@ -704,7 +705,7 @@ ENTRY(_system_call)
 	sp += 4;
 
 	SP += -12;
-	call _schedule;
+	pseudo_long_call _schedule, p4;
 	SP += 12;
 
 	jump .Lresume_userspace_1;
@@ -723,7 +724,7 @@ ENTRY(_system_call)
 
 	r0 = sp;
 	SP += -12;
-	call _do_notify_resume;
+	pseudo_long_call _do_notify_resume, p5;
 	SP += 12;
 
 .Lsyscall_really_exit:
@@ -736,11 +737,17 @@ ENDPROC(_system_call)
  * this symbol need not be global anyways, so ...
  */
 _sys_trace:
-	call _syscall_trace;
-
-	/* Execute the appropriate system call */
+	r0 = sp;
+	pseudo_long_call _syscall_trace_enter, p5;
 
+	/* Make sure the system call # is valid */
 	p4 = [SP + PT_P0];
+	p3 = __NR_syscall;
+	cc = p3 <= p4;
+	r0 = -ENOSYS;
+	if cc jump .Lsys_trace_badsys;
+
+	/* Execute the appropriate system call */
 	p5.l = _sys_call_table;
 	p5.h = _sys_call_table;
 	p5 = p5 + (p4 << 2);
@@ -758,9 +765,11 @@ _sys_trace:
 	SP += -12;
 	call (p5);
 	SP += 24;
+.Lsys_trace_badsys:
 	[sp + PT_R0] = r0;
 
-	call _syscall_trace;
+	r0 = sp;
+	pseudo_long_call _syscall_trace_leave, p5;
 	jump .Lresume_userspace;
 ENDPROC(_sys_trace)
 
@@ -816,8 +825,8 @@ ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
 #ifdef CONFIG_IPIPE
-	p2.l = _per_cpu__ipipe_percpu_domain;
-	p2.h = _per_cpu__ipipe_percpu_domain;
+	p2.l = _ipipe_percpu_domain;
+	p2.h = _ipipe_percpu_domain;
 	r0.l = _ipipe_root;
 	r0.h = _ipipe_root;
 	r2 = [p2];
@@ -966,6 +975,13 @@ ENTRY(_evt_evt14)
 #else
 	cli r0;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = rets;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	rets = [sp++];
+#endif
 	[--sp] = RETI;
 	SP += 4;
 	rts;
@@ -989,6 +1005,14 @@ ENTRY(_schedule_and_signal_from_int)
 	p1 = rets;
 	[sp + PT_RESERVED] = p1;
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
+	 * is turned on, so disable all irqs. */
+	cli r0;
+	sp += -12;
+	call _trace_hardirqs_on;
+	sp += 12;
+#endif
 #ifdef CONFIG_SMP
 	GET_PDA(p0, r0); 	/* Fetch current PDA (can't migrate to other CPU here) */
 	r0 = [p0 + PDA_IRQFLAGS];
@@ -1007,7 +1031,8 @@ ENTRY(_schedule_and_signal_from_int)
 
 	r0 = sp;
 	sp += -12;
-	call _finish_atomic_sections;
+
+	pseudo_long_call _finish_atomic_sections, p5;
 	sp += 12;
 	jump.s .Lresume_userspace;
 ENDPROC(_schedule_and_signal_from_int)
@@ -1357,7 +1382,7 @@ ENTRY(_sys_call_table)
 	.long _sys_newuname
 	.long _sys_ni_syscall	/* old sys_modify_ldt */
 	.long _sys_adjtimex
-	.long _sys_ni_syscall	/* 125 */ /* sys_mprotect */
+	.long _sys_mprotect	/* 125 */
 	.long _sys_ni_syscall	/* old sys_sigprocmask */
 	.long _sys_ni_syscall	/* old "creat_module" */
 	.long _sys_init_module
@@ -1376,16 +1401,16 @@ ENTRY(_sys_call_table)
 	.long _sys_getdents
 	.long _sys_ni_syscall	/* sys_select */
 	.long _sys_flock
-	.long _sys_ni_syscall	/* sys_msync */
+	.long _sys_msync
 	.long _sys_readv		/* 145 */
 	.long _sys_writev
 	.long _sys_getsid
 	.long _sys_fdatasync
 	.long _sys_sysctl
-	.long _sys_ni_syscall	/* 150 */ /* sys_mlock */
-	.long _sys_ni_syscall	/* sys_munlock */
-	.long _sys_ni_syscall	/* sys_mlockall */
-	.long _sys_ni_syscall	/* sys_munlockall */
+	.long _sys_mlock	/* 150 */
+	.long _sys_munlock
+	.long _sys_mlockall
+	.long _sys_munlockall
 	.long _sys_sched_setparam
 	.long _sys_sched_getparam /* 155 */
 	.long _sys_sched_setscheduler
@@ -1450,8 +1475,8 @@ ENTRY(_sys_call_table)
 	.long _sys_setfsuid	/* 215 */
 	.long _sys_setfsgid
 	.long _sys_pivot_root
-	.long _sys_ni_syscall	/* sys_mincore */
-	.long _sys_ni_syscall	/* sys_madvise */
+	.long _sys_mincore
+	.long _sys_madvise
 	.long _sys_getdents64	/* 220 */
 	.long _sys_fcntl64
 	.long _sys_ni_syscall	/* reserved for TUX */
@@ -1507,7 +1532,7 @@ ENTRY(_sys_call_table)
 	.long _sys_utimes
 	.long _sys_fadvise64_64
 	.long _sys_ni_syscall /* vserver */
-	.long _sys_ni_syscall /* 275, mbind */
+	.long _sys_mbind	/* 275 */
 	.long _sys_ni_syscall /* get_mempolicy */
 	.long _sys_ni_syscall /* set_mempolicy */
 	.long _sys_mq_open
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index cab0a00..4391621 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -144,8 +144,8 @@ ENTRY(__start)
 #endif
 
 	/* Initialize stack pointer */
-	sp.l = _init_thread_union;
-	sp.h = _init_thread_union;
+	sp.l = _init_thread_union + THREAD_SIZE;
+	sp.h = _init_thread_union + THREAD_SIZE;
 	fp = sp;
 	usp = sp;
 
@@ -186,6 +186,11 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bfin_relocate_l1_mem;
+
+#ifdef CONFIG_ROMKERNEL
+	call _bfin_relocate_xip_data;
+#endif
+
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 	/* Only use on-chip scratch space for stack when absolutely required
 	 * to avoid Anomaly 05000227 ... we know the init_clocks() func only
@@ -257,12 +262,7 @@ ENTRY(_real_start)
 	R0 = R7;
 	call _cmdline_init;
 
-	/* Load the current thread pointer and stack */
-	p1 = THREAD_SIZE + 4 (z);	/* +4 is for reti loading */
-	sp = sp + p1;
-	usp = sp;
-	fp = sp;
-	sp += -12;
+	sp += -12 + 4; /* +4 is for reti loading above */
 	call _init_pda
 	sp += 12;
 	jump.l _start_kernel;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 8085ff1..cee62cf 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -88,6 +88,13 @@ __common_int_entry:
 #else
 	cli r1;
 #endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = r0;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	r0 = [sp++];
+#endif
 	[--sp] = RETI;  /* orig_pc */
 	/* Clear all L registers.  */
 	r1 = 0 (x);
@@ -109,10 +116,10 @@ __common_int_entry:
 	cc = r0 == 0;
 	if cc jump .Lcommon_restore_context;
 #else /* CONFIG_IPIPE */
-	call _do_irq;
+	pseudo_long_call _do_irq, p2;
 	SP += 12;
 #endif /* CONFIG_IPIPE */
-	call _return_from_int;
+	pseudo_long_call _return_from_int, p2;
 .Lcommon_restore_context:
 	RESTORE_CONTEXT
 	rti;
@@ -168,7 +175,7 @@ ENTRY(_evt_ivhw)
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
-	call _trap_c;
+	pseudo_long_call _trap_c, p5;
 	SP += 12;
 
 #ifdef EBIU_ERRMST
@@ -179,7 +186,7 @@ ENTRY(_evt_ivhw)
 	w[p0] = r0.l;
 #endif
 
-	call _ret_from_exception;
+	pseudo_long_call _ret_from_exception, p2;
 
 .Lcommon_restore_all_sys:
 	RESTORE_ALL_SYS
@@ -187,12 +194,28 @@ ENTRY(_evt_ivhw)
 ENDPROC(_evt_ivhw)
 
 /* Interrupt routine for evt2 (NMI).
- * We don't actually use this, so just return.
  * For inner circle type details, please see:
  * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
  */
 ENTRY(_evt_nmi)
+#ifndef CONFIG_NMI_WATCHDOG
 .weak _evt_nmi
+#else
+	/* Not take account of CPLBs, this handler will not return */
+	SAVE_ALL_SYS
+	r0 = sp;
+	r1 = retn;
+	[sp + PT_PC] = r1;
+	trace_buffer_save(p4,r5);
+
+	ANOMALY_283_315_WORKAROUND(p4, r5)
+
+	SP += -12;
+	call _do_nmi;
+	SP += 12;
+1:
+	jump 1b;
+#endif
 	rtn;
 ENDPROC(_evt_nmi)
 
@@ -223,7 +246,7 @@ ENTRY(_evt_system_call)
 #ifdef CONFIG_FRAME_POINTER
 	fp = 0;
 #endif
-	call _system_call;
+	pseudo_long_call _system_call, p2;
 	jump .Lcommon_restore_context;
 ENDPROC(_evt_system_call)
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 1873b2c..1c8c4c7 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -28,6 +28,7 @@
 #include <asm/dpmc.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/bfin_sport.h>
+#include <asm/bfin_can.h>
 
 #define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
 
@@ -91,26 +92,29 @@ static void __init search_IAR(void)
 {
 	unsigned ivg, irq_pos = 0;
 	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
-		int irqn;
+		int irqN;
 
 		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
 
-		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
-			int iar_shift = (irqn & 7) * 4;
-				if (ivg == (0xf &
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \
-	|| defined(CONFIG_BF539) || defined(CONFIG_BF51x)
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 ((irqn % 32) >> 3) + ((irqn / 32) *
-					 ((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) {
+		for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
+			int irqn;
+			u32 iar = bfin_read32((unsigned long *)SIC_IAR0 +
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
+	defined(CONFIG_BF538) || defined(CONFIG_BF539)
+				((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
 #else
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 (irqn >> 3)) >> iar_shift)) {
+				(irqN >> 3)
 #endif
-				ivg_table[irq_pos].irqno = IVG7 + irqn;
-				ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
-				ivg7_13[ivg].istop++;
-				irq_pos++;
+				);
+
+			for (irqn = irqN; irqn < irqN + 4; ++irqn) {
+				int iar_shift = (irqn & 7) * 4;
+				if (ivg == (0xf & (iar >> iar_shift))) {
+					ivg_table[irq_pos].irqno = IVG7 + irqn;
+					ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
+					ivg7_13[ivg].istop++;
+					irq_pos++;
+				}
 			}
 		}
 	}
@@ -172,7 +176,12 @@ static void bfin_internal_mask_irq(unsigned int irq)
 	local_irq_restore_hw(flags);
 }
 
+#ifdef CONFIG_SMP
+static void bfin_internal_unmask_irq_affinity(unsigned int irq,
+		const struct cpumask *affinity)
+#else
 static void bfin_internal_unmask_irq(unsigned int irq)
+#endif
 {
 	unsigned long flags;
 
@@ -185,16 +194,38 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
-	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
-			     (1 << mask_bit));
 #ifdef CONFIG_SMP
-	bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) |
-			     (1 << mask_bit));
+	if (cpumask_test_cpu(0, affinity))
+#endif
+		bfin_write_SIC_IMASK(mask_bank,
+			bfin_read_SIC_IMASK(mask_bank) |
+			(1 << mask_bit));
+#ifdef CONFIG_SMP
+	if (cpumask_test_cpu(1, affinity))
+		bfin_write_SICB_IMASK(mask_bank,
+			bfin_read_SICB_IMASK(mask_bank) |
+			(1 << mask_bit));
 #endif
 #endif
 	local_irq_restore_hw(flags);
 }
 
+#ifdef CONFIG_SMP
+static void bfin_internal_unmask_irq(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	bfin_internal_unmask_irq_affinity(irq, desc->affinity);
+}
+
+static int bfin_internal_set_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	bfin_internal_mask_irq(irq);
+	bfin_internal_unmask_irq_affinity(irq, mask);
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_PM
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
@@ -224,11 +255,6 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 	wakeup |= USBWE;
 	break;
 #endif
-#ifdef IRQ_KEY
-	case IRQ_KEY:
-	wakeup |= KPADWE;
-	break;
-#endif
 #ifdef CONFIG_BF54x
 	case IRQ_CNT:
 	wakeup |= ROTWE;
@@ -270,6 +296,9 @@ static struct irq_chip bfin_internal_irqchip = {
 	.mask_ack = bfin_internal_mask_irq,
 	.disable = bfin_internal_mask_irq,
 	.enable = bfin_internal_unmask_irq,
+#ifdef CONFIG_SMP
+	.set_affinity = bfin_internal_set_affinity,
+#endif
 #ifdef CONFIG_PM
 	.set_wake = bfin_internal_set_wake,
 #endif
@@ -294,7 +323,6 @@ static int error_int_mask;
 static void bfin_generic_error_mask_irq(unsigned int irq)
 {
 	error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
-
 	if (!error_int_mask)
 		bfin_internal_mask_irq(IRQ_GENERIC_ERROR);
 }
@@ -385,6 +413,127 @@ static void bfin_demux_error_irq(unsigned int int_err_irq,
 }
 #endif				/* BF537_GENERIC_ERROR_INT_DEMUX */
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static int mac_stat_int_mask;
+
+static void bfin_mac_status_ack_irq(unsigned int irq)
+{
+	switch (irq) {
+	case IRQ_MAC_MMCINT:
+		bfin_write_EMAC_MMC_TIRQS(
+			bfin_read_EMAC_MMC_TIRQE() &
+			bfin_read_EMAC_MMC_TIRQS());
+		bfin_write_EMAC_MMC_RIRQS(
+			bfin_read_EMAC_MMC_RIRQE() &
+			bfin_read_EMAC_MMC_RIRQS());
+		break;
+	case IRQ_MAC_RXFSINT:
+		bfin_write_EMAC_RX_STKY(
+			bfin_read_EMAC_RX_IRQE() &
+			bfin_read_EMAC_RX_STKY());
+		break;
+	case IRQ_MAC_TXFSINT:
+		bfin_write_EMAC_TX_STKY(
+			bfin_read_EMAC_TX_IRQE() &
+			bfin_read_EMAC_TX_STKY());
+		break;
+	case IRQ_MAC_WAKEDET:
+		 bfin_write_EMAC_WKUP_CTL(
+			bfin_read_EMAC_WKUP_CTL() | MPKS | RWKS);
+		break;
+	default:
+		/* These bits are W1C */
+		bfin_write_EMAC_SYSTAT(1L << (irq - IRQ_MAC_PHYINT));
+		break;
+	}
+}
+
+static void bfin_mac_status_mask_irq(unsigned int irq)
+{
+	mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT));
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_mask_irq(IRQ_MAC_ERROR);
+#endif
+	bfin_mac_status_ack_irq(irq);
+}
+
+static void bfin_mac_status_unmask_irq(unsigned int irq)
+{
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	switch (irq) {
+	case IRQ_MAC_PHYINT:
+		bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE);
+		break;
+	default:
+		break;
+	}
+#else
+	if (!mac_stat_int_mask)
+		bfin_internal_unmask_irq(IRQ_MAC_ERROR);
+#endif
+	mac_stat_int_mask |= 1L << (irq - IRQ_MAC_PHYINT);
+}
+
+#ifdef CONFIG_PM
+int bfin_mac_status_set_wake(unsigned int irq, unsigned int state)
+{
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+	return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state);
+#else
+	return bfin_internal_set_wake(IRQ_MAC_ERROR, state);
+#endif
+}
+#endif
+
+static struct irq_chip bfin_mac_status_irqchip = {
+	.name = "MACST",
+	.ack = bfin_ack_noop,
+	.mask_ack = bfin_mac_status_mask_irq,
+	.mask = bfin_mac_status_mask_irq,
+	.unmask = bfin_mac_status_unmask_irq,
+#ifdef CONFIG_PM
+	.set_wake = bfin_mac_status_set_wake,
+#endif
+};
+
+static void bfin_demux_mac_status_irq(unsigned int int_err_irq,
+				 struct irq_desc *inta_desc)
+{
+	int i, irq = 0;
+	u32 status = bfin_read_EMAC_SYSTAT();
+
+	for (i = 0; i < (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
+		if (status & (1L << i)) {
+			irq = IRQ_MAC_PHYINT + i;
+			break;
+		}
+
+	if (irq) {
+		if (mac_stat_int_mask & (1L << (irq - IRQ_MAC_PHYINT))) {
+			bfin_handle_irq(irq);
+		} else {
+			bfin_mac_status_ack_irq(irq);
+			pr_debug("IRQ %d:"
+				 " MASKED MAC ERROR INTERRUPT ASSERTED\n",
+				 irq);
+		}
+	} else
+		printk(KERN_ERR
+		       "%s : %s : LINE %d :\nIRQ ?: MAC ERROR"
+		       " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+		       __func__, __FILE__, __LINE__);
+}
+#endif
+
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
@@ -516,14 +665,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 #ifdef CONFIG_PM
 int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned gpio = irq_to_gpio(irq);
-
-	if (state)
-		gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
-	else
-		gpio_pm_wakeup_free(gpio);
-
-	return 0;
+	return gpio_pm_wakeup_ctrl(irq_to_gpio(irq), state);
 }
 #endif
 
@@ -1031,7 +1173,6 @@ int __init init_arch_irq(void)
 #elif defined(CONFIG_BF538) || defined(CONFIG_BF539)
 		case IRQ_PORTF_INTA:
 #endif
-
 			set_irq_chained_handler(irq,
 						bfin_demux_gpio_irq);
 			break;
@@ -1040,29 +1181,36 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_TICKSOURCE_GPTMR0
-		case IRQ_TIMER0:
-#endif
-#ifdef CONFIG_TICKSOURCE_CORETMR
-		case IRQ_CORETMR:
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+		case IRQ_MAC_ERROR:
+			set_irq_chained_handler(irq, bfin_demux_mac_status_irq);
+			break;
 #endif
+#ifdef CONFIG_SMP
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
 
-#ifdef CONFIG_IPIPE
-#ifndef CONFIG_TICKSOURCE_CORETMR
-		case IRQ_TIMER0:
+#ifdef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_CORETMR:
+# ifdef CONFIG_SMP
+			set_irq_handler(irq, handle_percpu_irq);
+			break;
+# else
 			set_irq_handler(irq, handle_simple_irq);
 			break;
+# endif
 #endif
-		case IRQ_CORETMR:
+
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
+#endif
+
+#ifdef CONFIG_IPIPE
 		default:
 			set_irq_handler(irq, handle_level_irq);
 			break;
@@ -1078,14 +1226,22 @@ int __init init_arch_irq(void)
 	for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++)
 		set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip,
 					 handle_level_irq);
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	set_irq_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq);
+#endif
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++)
+		set_irq_chip_and_handler(irq, &bfin_mac_status_irqchip,
+					 handle_level_irq);
+#endif
 	/* if configured as edge, then will be changed to do_edge_IRQ */
-	for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++)
+	for (irq = GPIO_IRQ_BASE;
+		irq < (GPIO_IRQ_BASE + MAX_BLACKFIN_GPIOS); irq++)
 		set_irq_chip_and_handler(irq, &bfin_gpio_irqchip,
 					 handle_level_irq);
 
-
 	bfin_write_IMASK(0);
 	CSYNC();
 	ilat = bfin_read_ILAT();
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 8837be4..ea7f95f 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -11,6 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 
@@ -19,35 +20,11 @@
 #include <asm/dma.h>
 #include <asm/dpmc.h>
 
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
-#define WAKEUP_TYPE	PM_WAKE_HIGH
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
-#define WAKEUP_TYPE	PM_WAKE_LOW
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
-#define WAKEUP_TYPE	PM_WAKE_FALLING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
-#define WAKEUP_TYPE	PM_WAKE_RISING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
-#define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
-#endif
-
 
 void bfin_pm_suspend_standby_enter(void)
 {
 	unsigned long flags;
 
-#ifdef CONFIG_PM_WAKEUP_BY_GPIO
-	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
-#endif
-
 	local_irq_save_hw(flags);
 	bfin_pm_standby_setup();
 
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 369e687..a17107a 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
@@ -122,9 +123,17 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 	wait = msg->call_struct.wait;
 	cpu_clear(cpu, msg->call_struct.pending);
 	func(info);
-	if (wait)
+	if (wait) {
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * 'wait' usually means synchronization between CPUs.
+		 * Invalidate D cache in case shared data was changed
+		 * by func() to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		cpu_clear(cpu, msg->call_struct.waitmask);
-	else
+	} else
 		kfree(msg);
 }
 
@@ -161,8 +170,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 			kfree(msg);
 			break;
 		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message \
-			0x%lx\n", cpu, msg->type);
+			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
+			       cpu, msg->type);
 			kfree(msg);
 			break;
 		}
@@ -219,6 +228,13 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 			blackfin_dcache_invalidate_range(
 				(unsigned long)(&msg->call_struct.waitmask),
 				(unsigned long)(&msg->call_struct.waitmask));
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * Invalidate D cache in case shared data was changed by
+		 * other processors to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		kfree(msg);
 	}
 	return 0;
@@ -261,6 +277,13 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 			blackfin_dcache_invalidate_range(
 				(unsigned long)(&msg->call_struct.waitmask),
 				(unsigned long)(&msg->call_struct.waitmask));
+#ifdef __ARCH_SYNC_CORE_DCACHE
+		/*
+		 * Invalidate D cache in case shared data was changed by
+		 * other processors to ensure cache coherence.
+		 */
+		resync_core_dcache();
+#endif
 		kfree(msg);
 	}
 	return 0;
@@ -322,8 +345,11 @@ void smp_send_stop(void)
 
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	struct task_struct *idle;
 	int ret;
+	static struct task_struct *idle;
+
+	if (idle)
+		free_task(idle);
 
 	idle = fork_idle(cpu);
 	if (IS_ERR(idle)) {
@@ -332,7 +358,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	}
 
 	secondary_stack = task_stack_page(idle) + THREAD_SIZE;
-	smp_wmb();
 
 	ret = platform_boot_secondary(cpu, idle);
 
@@ -343,9 +368,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 static void __cpuinit setup_secondary(unsigned int cpu)
 {
-#if !defined(CONFIG_TICKSOURCE_GPTMR0)
-	struct irq_desc *timer_desc;
-#endif
 	unsigned long ilat;
 
 	bfin_write_IMASK(0);
@@ -360,17 +382,6 @@ static void __cpuinit setup_secondary(unsigned int cpu)
 	bfin_irq_flags |= IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
 	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
-	/* Power down the core timer, just to play safe. */
-	bfin_write_TCNTL(0);
-
-	/* system timer0 has been setup by CoreA. */
-#else
-	timer_desc = irq_desc + IRQ_CORETMR;
-	setup_core_timer();
-	timer_desc->chip->enable(IRQ_CORETMR);
-#endif
 }
 
 void __cpuinit secondary_start_kernel(void)
@@ -405,7 +416,6 @@ void __cpuinit secondary_start_kernel(void)
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
-	BUG_ON(current->mm);	/* Can't be, but better be safe than sorry. */
 
 	preempt_disable();
 
@@ -413,6 +423,9 @@ void __cpuinit secondary_start_kernel(void)
 
 	platform_secondary_init(cpu);
 
+	/* setup local core timer */
+	bfin_local_timer_setup();
+
 	local_irq_enable();
 
 	/*
@@ -462,25 +475,58 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end)
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
 
 #ifdef __ARCH_SYNC_CORE_ICACHE
+unsigned long icache_invld_count[NR_CPUS];
 void resync_core_icache(void)
 {
 	unsigned int cpu = get_cpu();
 	blackfin_invalidate_entire_icache();
-	++per_cpu(cpu_data, cpu).icache_invld_count;
+	icache_invld_count[cpu]++;
 	put_cpu();
 }
 EXPORT_SYMBOL(resync_core_icache);
 #endif
 
 #ifdef __ARCH_SYNC_CORE_DCACHE
+unsigned long dcache_invld_count[NR_CPUS];
 unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
 
 void resync_core_dcache(void)
 {
 	unsigned int cpu = get_cpu();
 	blackfin_invalidate_entire_dcache();
-	++per_cpu(cpu_data, cpu).dcache_invld_count;
+	dcache_invld_count[cpu]++;
 	put_cpu();
 }
 EXPORT_SYMBOL(resync_core_dcache);
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+int __cpuexit __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (cpu == 0)
+		return -EPERM;
+
+	set_cpu_online(cpu, false);
+	return 0;
+}
+
+static DECLARE_COMPLETION(cpu_killed);
+
+int __cpuexit __cpu_die(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+void cpu_die(void)
+{
+	complete(&cpu_killed);
+
+	atomic_dec(&init_mm.mm_users);
+	atomic_dec(&init_mm.mm_count);
+
+	local_irq_disable();
+	platform_cpu_die();
+}
+#endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index bb9c98f..bb4e8ff 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -4,6 +4,7 @@
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/gfp.h>
 #include <linux/swap.h>
 #include <linux/bootmem.h>
 #include <linux/uaccess.h>
@@ -14,23 +15,11 @@
 #include "blackfin_sram.h"
 
 /*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
+ * ZERO_PAGE is a special page that is used for zero-initialized data and COW.
+ * Let the bss do its zero-init magic so we don't have to do it ourselves.
  */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-static unsigned long empty_zero_page;
+char empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+EXPORT_SYMBOL(empty_zero_page);
 
 #ifndef CONFIG_EXCEPTION_L1_SCRATCH
 #if defined CONFIG_SYSCALL_TAB_L1
@@ -51,40 +40,26 @@ EXPORT_SYMBOL(cpu_pda);
 void __init paging_init(void)
 {
 	/*
-	 * make sure start_mem is page aligned,  otherwise bootmem and
-	 * page_alloc get different views og the world
+	 * make sure start_mem is page aligned, otherwise bootmem and
+	 * page_alloc get different views of the world
 	 */
 	unsigned long end_mem = memory_end & PAGE_MASK;
 
-	pr_debug("start_mem is %#lx   virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
-
-	/*
-	 * initialize the bad page table and bad page to point
-	 * to a couple of allocated pages
-	 */
-	empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	memset((void *)empty_zero_page, 0, PAGE_SIZE);
+	unsigned long zones_size[MAX_NR_ZONES] = {
+		[0] = 0,
+		[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT,
+		[ZONE_NORMAL] = 0,
+#ifdef CONFIG_HIGHMEM
+		[ZONE_HIGHMEM] = 0,
+#endif
+	};
 
-	/*
-	 * Set up SFC/DFC registers (user data space)
-	 */
+	/* Set up SFC/DFC registers (user data space) */
 	set_fs(KERNEL_DS);
 
-	pr_debug("free_area_init -> start_mem is %#lx   virtual_end is %#lx\n",
+	pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
 	        PAGE_ALIGN(memory_start), end_mem);
-
-	{
-		unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-
-		zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-		zones_size[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
-		zones_size[ZONE_HIGHMEM] = 0;
-#endif
-		free_area_init(zones_size);
-	}
+	free_area_init(zones_size);
 }
 
 asmlinkage void __init init_pda(void)
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 84cdc5a..7e2e674 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/sched.h>
 
@@ -42,13 +43,12 @@ static DEFINE_SPINLOCK(dtest_lock);
 /* Takes a void pointer */
 #define IADDR2DTEST(x) \
 	({ unsigned long __addr = (unsigned long)(x); \
-		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
-		(__addr & 0x8000) << 23  | /* Bank A/B               */ \
-		(__addr & 0x0800) << 15  | /* address bit  11        */ \
-		(__addr & 0x3000) <<  4  | /* address bits 13:12     */ \
-		(__addr & 0x8000) <<  8  | /* address bit  15        */ \
-		(0x1000000)              | /* instruction access = 1 */ \
-		(0x4);                     /* data array = 1         */ \
+		((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1)   */ \
+		(1 << 24)                           | /* instruction access = 1    */ \
+		((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank)   */ \
+		((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
+		(__addr & 0x47F8)                   | /* addr bits 14 & 10:3       */ \
+		(1 << 2);                             /* data array = 1            */ \
 	})
 
 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
@@ -62,7 +62,7 @@ static void isram_write(const void *addr, uint64_t data)
 	uint32_t cmd;
 	unsigned long flags;
 
-	if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
+	if (unlikely(addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH)))
 		return;
 
 	cmd = IADDR2DTEST(addr) | 2;             /* write */
@@ -93,7 +93,7 @@ static uint64_t isram_read(const void *addr)
 	unsigned long flags;
 	uint64_t ret;
 
-	if (addr > (void *)(L1_CODE_START + L1_CODE_LENGTH))
+	if (unlikely(addr > (void *)(L1_CODE_START + L1_CODE_LENGTH)))
 		return 0;
 
 	cmd = IADDR2DTEST(addr) | 0;              /* read */
@@ -120,7 +120,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 {
 	if ((addr >= (void *)L1_CODE_START) &&
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
-		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
+		if (unlikely((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 			show_stack(NULL, NULL);
 			pr_err("copy involving %p length (%zu) too long\n", addr, n);
 		}
@@ -195,7 +195,7 @@ EXPORT_SYMBOL(isram_memcpy);
 
 #ifdef CONFIG_BFIN_ISRAM_SELF_TEST
 
-#define TEST_LEN 0x100
+static int test_len = 0x20000;
 
 static __init void hex_dump(unsigned char *buf, int len)
 {
@@ -211,15 +211,15 @@ static __init int isram_read_test(char *sdram, void *l1inst)
 	pr_info("INFO: running isram_read tests\n");
 
 	/* setup some different data to play with */
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	/* make sure we can read the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		data1 = isram_read(l1inst + i);
 		memcpy(&data2, sdram + i, sizeof(data2));
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
@@ -237,25 +237,25 @@ static __init int isram_write_test(char *sdram, void *l1inst)
 	pr_info("INFO: running isram_write tests\n");
 
 	/* setup some different data to play with */
-	memset(sdram, 0, TEST_LEN * 2);
-	dma_memcpy(l1inst, sdram, TEST_LEN);
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
+	memset(sdram, 0, test_len * 2);
+	dma_memcpy(l1inst, sdram, test_len);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
 
 	/* make sure we can write the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		memcpy(&data1, sdram + i, sizeof(data1));
 		isram_write(l1inst + i, data1);
 		data2 = isram_read(l1inst + i);
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
 		}
 	}
 
-	dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	dma_memcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: isram_write() did not work properly\n");
 		++ret;
 	}
@@ -267,12 +267,12 @@ static __init int
 _isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
                    void *(*fmemcpy)(void *, const void *, size_t))
 {
-	memset(sdram, pattern, TEST_LEN);
-	fmemcpy(l1inst, sdram, TEST_LEN);
-	fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	memset(sdram, pattern, test_len);
+	fmemcpy(l1inst, sdram, test_len);
+	fmemcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
-			smemcpy, l1inst, sdram, TEST_LEN, pattern);
+			smemcpy, l1inst, sdram, test_len, pattern);
 		return 1;
 	}
 	return 0;
@@ -291,12 +291,13 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 	/* check read of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (read) tests\n");
 
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	/* setup some different data to play with */
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			memset(cmp, 0, sizeof(cmp));
@@ -309,7 +310,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -320,11 +321,11 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 	/* check write of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (write) tests\n");
 
-	memset(sdram + TEST_LEN, 0, TEST_LEN);
-	dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+	memset(sdram + test_len, 0, test_len);
+	dma_memcpy(l1inst, sdram + test_len, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			isram_memcpy(l1inst + i, sdram + i, j);
@@ -337,7 +338,7 @@ static __init int isram_memcpy_test(char *sdram, void *l1inst)
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -354,22 +355,30 @@ static __init int isram_test_init(void)
 	char *sdram;
 	void *l1inst;
 
-	sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
-	if (!sdram) {
-		pr_warning("SKIP: could not allocate sdram\n");
-		return 0;
+	/* Try to test as much of L1SRAM as possible */
+	while (test_len) {
+		test_len >>= 1;
+		l1inst = l1_inst_sram_alloc(test_len);
+		if (l1inst)
+			break;
 	}
-
-	l1inst = l1_inst_sram_alloc(TEST_LEN);
 	if (!l1inst) {
-		kfree(sdram);
 		pr_warning("SKIP: could not allocate L1 inst\n");
 		return 0;
 	}
+	pr_info("INFO: testing %#x bytes (%p - %p)\n",
+	        test_len, l1inst, l1inst + test_len);
+
+	sdram = kmalloc(test_len * 2, GFP_KERNEL);
+	if (!sdram) {
+		sram_free(l1inst);
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
 
 	/* sanity check initial L1 inst state */
 	ret = 1;
-	pr_info("INFO: running initial dma_memcpy checks\n");
+	pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
 	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
 		goto abort;
 	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index f068c11..627e04b 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -17,6 +17,7 @@
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
 #include <linux/rtc.h>
+#include <linux/slab.h>
 #include <asm/blackfin.h>
 #include <asm/mem_map.h>
 #include "blackfin_sram.h"
@@ -255,7 +256,8 @@ static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
 		plast->next = pslot->next;
 		pavail = pslot;
 	} else {
-		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		/* use atomic so our L1 allocator can be used atomically */
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_ATOMIC);
 
 		if (!pavail)
 			return NULL;
@@ -402,7 +404,7 @@ void *l1_data_A_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -411,7 +413,6 @@ void *l1_data_A_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -430,7 +431,7 @@ int l1_data_A_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -439,7 +440,6 @@ int l1_data_A_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -455,7 +455,7 @@ void *l1_data_B_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -464,7 +464,6 @@ void *l1_data_B_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -483,7 +482,7 @@ int l1_data_B_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
@@ -492,7 +491,6 @@ int l1_data_B_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -540,7 +538,7 @@ void *l1_inst_sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
 
@@ -549,7 +547,6 @@ void *l1_inst_sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
-	put_cpu();
 
 	pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
 		 (long unsigned int)addr, size);
@@ -568,7 +565,7 @@ int l1_inst_sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_inst_sram_lock, cpu), flags);
 
@@ -577,7 +574,6 @@ int l1_inst_sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_inst_sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 #else
@@ -593,7 +589,7 @@ void *l1sram_alloc(size_t size)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -602,7 +598,6 @@ void *l1sram_alloc(size_t size)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return addr;
 }
@@ -614,7 +609,7 @@ void *l1sram_alloc_max(size_t *psize)
 	void *addr;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -623,7 +618,6 @@ void *l1sram_alloc_max(size_t *psize)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return addr;
 }
@@ -635,7 +629,7 @@ int l1sram_free(const void *addr)
 	int ret;
 	unsigned int cpu;
 
-	cpu = get_cpu();
+	cpu = smp_processor_id();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1sram_lock, cpu), flags);
 
@@ -644,7 +638,6 @@ int l1sram_free(const void *addr)
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1sram_lock, cpu), flags);
-	put_cpu();
 
 	return ret;
 }
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 7adac38..e25bf44 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -20,6 +20,15 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
+config GENERIC_TIME
+	def_bool y
+
+config GENERIC_CMOS_UPDATE
+	def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
+	def_bool y
+
 config GENERIC_IOMAP
        bool
        default y
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index 77630df..8842756 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
 #include <linux/bcd.h>
 #include <linux/capability.h>
 
@@ -238,9 +239,7 @@ static unsigned char days_in_mo[] =
 
 /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
 
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg) 
+static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 
@@ -354,6 +353,17 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	}
 }
 
+static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = rtc_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static void
 print_rtc_status(void)
 {
@@ -375,8 +385,8 @@ print_rtc_status(void)
 /* The various file operations we support. */
 
 static const struct file_operations rtc_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	rtc_ioctl,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = rtc_unlocked_ioctl,
 }; 
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index 1f2ae90..c340550 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -73,8 +73,7 @@ struct eeprom_type
   int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */
   
   /* this one is to keep the read/write operations atomic */
-  wait_queue_head_t wait_q;
-  volatile int busy;
+  struct mutex lock;
   int retry_cnt_addr; /* Used to keep track of number of retries for
                          adaptive timing adjustments */
   int retry_cnt_read;
@@ -115,8 +114,7 @@ const struct file_operations eeprom_fops =
 
 int __init eeprom_init(void)
 {
-  init_waitqueue_head(&eeprom.wait_q);
-  eeprom.busy = 0;
+  mutex_init(&eeprom.lock);
 
 #ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
 #define EETEXT "Found"
@@ -439,10 +437,7 @@ static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig)
 
 static int eeprom_read_buf(loff_t addr, char * buf, int count)
 {
-  struct file f;
-
-  f.f_pos = addr;
-  return eeprom_read(&f, buf, count, &addr);
+  return eeprom_read(NULL, buf, count, &addr);
 }
 
 
@@ -452,7 +447,7 @@ static int eeprom_read_buf(loff_t addr, char * buf, int count)
 static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off)
 {
   int read=0;
-  unsigned long p = file->f_pos;
+  unsigned long p = *off;
 
   unsigned char page;
 
@@ -461,12 +456,9 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
     return -EFAULT;
   }
   
-  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
-  if (signal_pending(current))
+  if (mutex_lock_interruptible(&eeprom.lock))
     return -EINTR;
 
-  eeprom.busy++;
-
   page = (unsigned char) (p >> 8);
   
   if(!eeprom_address(p))
@@ -476,8 +468,7 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
     i2c_stop();
     
     /* don't forget to wake them up */
-    eeprom.busy--;
-    wake_up_interruptible(&eeprom.wait_q);  
+    mutex_unlock(&eeprom.lock);
     return -EFAULT;
   }
 
@@ -501,11 +492,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
   
   if(read > 0)
   {
-    file->f_pos += read;
+    *off += read;
   }
 
-  eeprom.busy--;
-  wake_up_interruptible(&eeprom.wait_q);
+  mutex_unlock(&eeprom.lock);
   return read;
 }
 
@@ -513,11 +503,7 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
 
 static int eeprom_write_buf(loff_t addr, const char * buf, int count)
 {
-  struct file f;
-
-  f.f_pos = addr;
-  
-  return eeprom_write(&f, buf, count, &addr);
+  return eeprom_write(NULL, buf, count, &addr);
 }
 
 
@@ -534,16 +520,14 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
     return -EFAULT;
   }
 
-  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
   /* bail out if we get interrupted */
-  if (signal_pending(current))
+  if (mutex_lock_interruptible(&eeprom.lock))
     return -EINTR;
-  eeprom.busy++;
   for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
   {
     restart = 0;
     written = 0;
-    p = file->f_pos;
+    p = *off;
    
     
     while( (written < count) && (p < eeprom.size))
@@ -556,8 +540,7 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
         i2c_stop();
         
         /* don't forget to wake them up */
-        eeprom.busy--;
-        wake_up_interruptible(&eeprom.wait_q);
+        mutex_unlock(&eeprom.lock);
         return -EFAULT;
       }
 #ifdef EEPROM_ADAPTIVE_TIMING      
@@ -669,12 +652,11 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
     } /* while */
   } /* for  */
 
-  eeprom.busy--;
-  wake_up_interruptible(&eeprom.wait_q);
-  if (written == 0 && file->f_pos >= eeprom.size){
+  mutex_unlock(&eeprom.lock);
+  if (written == 0 && p >= eeprom.size){
     return -ENOSPC;
   }
-  file->f_pos += written;
+  *off = p;
   return written;
 }
 
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 7f656ae..a8737a8 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -14,7 +14,6 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 1e90c1a..7dcb1f8 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -53,7 +54,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -62,7 +63,7 @@ static int voltage_low;
 
 static const struct file_operations pcf8563_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = pcf8563_ioctl,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -212,8 +213,7 @@ pcf8563_exit(void)
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -339,6 +339,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 562b9a7f..109dcd8 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/major.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/init.h>
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index 2c18d08..0d6420d 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -358,7 +358,7 @@ mmu_bus_fault:
 1:	btstq	12, $r1		   ; Refill?
 	bpl	2f
 	lsrq	24, $r1     ; Get PGD index (bit 24-31)
-	move.d  [per_cpu__current_pgd], $r0 ; PGD for the current process
+	move.d  [current_pgd], $r0 ; PGD for the current process
 	move.d	[$r0+$r1.d], $r0   ; Get PMD
 	beq	2f
 	nop
@@ -692,7 +692,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 5d75f77..a0c0df8 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -17,8 +17,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
-#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
 /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
  * global just so that the kernel gdb can use it.
@@ -116,12 +116,12 @@ static unsigned int startup_crisv10_irq(unsigned int irq)
 
 static void enable_crisv10_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv10_unmask_irq(irq);
 }
 
 static void disable_crisv10_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv10_mask_irq(irq);
 }
 
 static void ack_crisv10_irq(unsigned int irq)
@@ -133,7 +133,7 @@ static void end_crisv10_irq(unsigned int irq)
 }
 
 static struct irq_chip crisv10_irq_type = {
-	.typename =    "CRISv10",
+	.name =        "CRISv10",
 	.startup =     startup_crisv10_irq,
 	.shutdown =    shutdown_crisv10_irq,
 	.enable =      enable_crisv10_irq,
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index c4c69cf..93f0f64 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -11,9 +11,9 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/fs.h>
-#include <linux/slab.h>
 #include <arch/svinto.h>
 #include <linux/init.h>
 
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index ee505b2..e70c804 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -127,57 +127,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-                        
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			
-			child->exit_code = data;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-			
-			break;
-		
- 		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-			
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-			
-			child->exit_code = SIGKILL;
-			
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:
-			ret = -EIO;
-			
-			if (!valid_signal(data))
-				break;
-			
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 		  	int i;
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 31ca141..30adae5 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -26,7 +26,6 @@
 /* it will make jiffies at 96 hz instead of 100 hz though */
 #undef USE_CASCADE_TIMERS
 
-extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
 extern int have_rtc;
 
@@ -188,8 +187,6 @@ stop_watchdog(void)
 #endif	
 }
 
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
 
 /*
  * timer_interrupt() needs to keep up the real-time clock,
@@ -232,24 +229,6 @@ timer_interrupt(int irq, void *dev_id)
 	do_timer(1);
 	
         cris_do_profile(regs); /* Save profiling information */
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 *
-	 * The division here is not time critical since it will run once in 
-	 * 11 minutes
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
         return IRQ_HANDLED;
 }
 
@@ -274,22 +253,10 @@ time_init(void)
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0) {
-		/* no RTC, start at 1980 */
-		xtime.tv_sec = 0;
-		xtime.tv_nsec = 0;
+	if(RTC_INIT() < 0)
 		have_rtc = 0;
-	} else {		
-		/* get the current time */
+	else
 		have_rtc = 1;
-		update_xtime_from_cmos();
-	}
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
-	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* Setup the etrax timers
 	 * Base frequency is 25000 hz, divider 250 -> 100 HZ
diff --git a/arch/cris/arch-v10/lib/dmacopy.c b/arch/cris/arch-v10/lib/dmacopy.c
index e5fb44f..49f5b8c 100644
--- a/arch/cris/arch-v10/lib/dmacopy.c
+++ b/arch/cris/arch-v10/lib/dmacopy.c
@@ -1,5 +1,4 @@
-/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $ 
- *
+/*
  * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
  */
 
@@ -13,11 +12,11 @@ void *dma_memcpy(void *pdst,
 		 unsigned int pn)
 {
 	static etrax_dma_descr indma, outdma;
-	
-	D(printk("dma_memcpy %d bytes... ", pn));
+
+	D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
 
 #if 0
-	*R_GEN_CONFIG = genconfig_shadow = 
+	*R_GEN_CONFIG = genconfig_shadow =
 		(genconfig_shadow & ~0x3c0000) |
 		IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
 		IO_STATE(R_GEN_CONFIG, dma7, intdma6);
@@ -32,11 +31,11 @@ void *dma_memcpy(void *pdst,
 	*R_DMA_CH7_FIRST = &outdma;
 	*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
 	*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
-	
-	while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
 
-	D(printk("done\n"));
+	while (*R_DMA_CH7_CMD == 1)
+		/* wait for completion */;
 
+	D(printk(KERN_DEBUG "done\n"));
 }
 
 
diff --git a/arch/cris/arch-v10/lib/hw_settings.S b/arch/cris/arch-v10/lib/hw_settings.S
index 56905aa..c09f19f 100644
--- a/arch/cris/arch-v10/lib/hw_settings.S
+++ b/arch/cris/arch-v10/lib/hw_settings.S
@@ -1,13 +1,11 @@
 /*
- * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- * 
  * This table is used by some tools to extract hardware parameters.
  * The table should be included in the kernel and the decompressor.
  * Don't forget to update the tools if you change this table.
  *
  * Copyright (C) 2001 Axis Communications AB
  *
- * Authors:  Mikael Starvik (starvik@axis.com)	
+ * Authors:  Mikael Starvik (starvik@axis.com)
  */
 
 #define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
@@ -15,13 +13,13 @@
 #define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-	
+
 	.ascii "HW_PARAM_MAGIC" ; Magic number
 	.dword 0xc0004000	; Kernel start address
 
 	; Debug port
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-	.dword 0		
+	.dword 0
 #elif defined(CONFIG_ETRAX_DEBUG_PORT1)
 	.dword 1
 #elif defined(CONFIG_ETRAX_DEBUG_PORT2)
@@ -30,7 +28,7 @@
 	.dword 3
 #else
 	.dword 4 ; No debug
-#endif			
+#endif
 
 	; SDRAM or EDO DRAM?
 #ifdef CONFIG_ETRAX_SDRAM
@@ -39,7 +37,7 @@
 	.dword 0
 #endif
 
-	; Register values 
+	; Register values
 	.dword R_WAITSTATES
 	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
 	.dword R_BUS_CONFIG
@@ -56,7 +54,7 @@
 	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
 #endif
 	.dword R_PORT_PA_SET
-	.dword PA_SET_VALUE 
+	.dword PA_SET_VALUE
 	.dword R_PORT_PB_SET
 	.dword PB_SET_VALUE
 	.dword 0 ; No more register values
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b46..8f79163 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum)
 		sum += *buff++;
 
 	if (endMarker > buff)
-		sum += *(const u8 *)buff;	/* add extra byte seperately */
+		sum += *(const u8 *)buff;	/* add extra byte separately */
 
 	BITOFF;
 	return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index b9e328e..a2dd740 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -360,24 +360,10 @@ config ETRAX_SER4_DSR_BIT
 	string "Ser 4 DSR bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_SER3_CD_BIT
+config ETRAX_SER4_CD_BIT
 	string "Ser 4 CD bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_RS485
-	bool "RS-485 support"
-	depends on ETRAXFS_SERIAL
-	help
-	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-
-config ETRAX_RS485_DISABLE_RECEIVER
-	bool "Disable serial receiver"
-	depends on ETRAX_RS485
-	help
-	  It is necessary to disable the serial receiver to avoid serial
-	  loopback.  Not all products are able to do this in software only.
-
 config ETRAX_SYNCHRONOUS_SERIAL
 	bool "Synchronous serial-port support"
 	depends on ETRAX_ARCH_V32
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index fd529a0..b70fb34 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -628,9 +628,9 @@ static int create_output_descriptors(struct cryptocop_operation *operation, int
 		cdesc->dma_descr->buf = (char*)virt_to_phys(operation->tfrm_op.indata[*iniov_ix].iov_base + *iniov_offset);
 		cdesc->dma_descr->after = cdesc->dma_descr->buf + dlength;
 
+		assert(desc_len >= dlength);
 		desc_len -= dlength;
 		*iniov_offset += dlength;
-		assert(desc_len >= 0);
 		if (*iniov_offset >= operation->tfrm_op.indata[*iniov_ix].iov_len) {
 			*iniov_offset = 0;
 			++(*iniov_ix);
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 179e7b8..2fd6a74 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -27,7 +27,6 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
@@ -650,10 +649,10 @@ i2c_release(struct inode *inode, struct file *filp)
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long
+i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
+	int ret;
 	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
 		return -ENOTTY;
 	}
@@ -666,9 +665,13 @@ i2c_ioctl(struct inode *inode, struct file *file,
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
 
-			return i2c_writereg(I2C_ARGSLAVE(arg),
+			lock_kernel();
+			ret = i2c_writereg(I2C_ARGSLAVE(arg),
 					    I2C_ARGREG(arg),
 					    I2C_ARGVALUE(arg));
+			unlock_kernel();
+			return ret;
+
 		case I2C_READREG:
 		{
 			unsigned char val;
@@ -676,7 +679,9 @@ i2c_ioctl(struct inode *inode, struct file *file,
 			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
+			lock_kernel();
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			unlock_kernel();
 			D(printk("= %d\n", val));
 			return val;
 		}
@@ -689,10 +694,10 @@ i2c_ioctl(struct inode *inode, struct file *file,
 }
 
 static const struct file_operations i2c_fops = {
-	.owner =    THIS_MODULE,
-	.ioctl =    i2c_ioctl,
-	.open =     i2c_open,
-	.release =  i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 static int __init i2c_init(void)
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index f447850..bef6eb5 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
@@ -49,7 +50,7 @@ static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -57,8 +58,8 @@ int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
 static int voltage_low;
 
 static const struct file_operations pcf8563_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	pcf8563_ioctl
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -208,8 +209,7 @@ pcf8563_exit(void)
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -335,6 +335,17 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 77ee319..bc0cfda 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -41,18 +41,16 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	return 0;
 }
 
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
+	resource_size_t start = res->start;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start;
 }
 
 int pcibios_enable_resources(struct pci_dev *dev, int mask)
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index fbe6595..ee55578 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/pci.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index d2a0fbf..4889f19 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -13,7 +13,6 @@
 #include <linux/errno.h>
 #include <linux/major.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c
index 64933e2..bde8d1a 100644
--- a/arch/cris/arch-v32/kernel/crisksyms.c
+++ b/arch/cris/arch-v32/kernel/crisksyms.c
@@ -24,5 +24,5 @@ EXPORT_SYMBOL(crisv32_io_get_name);
 EXPORT_SYMBOL(crisv32_io_get);
 
 /* Functions masking/unmasking interrupts */
-EXPORT_SYMBOL(mask_irq);
-EXPORT_SYMBOL(unmask_irq);
+EXPORT_SYMBOL(crisv32_mask_irq);
+EXPORT_SYMBOL(crisv32_unmask_irq);
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 435b967..1f39861 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -615,7 +615,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 57668db..0b1febe 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -280,8 +280,7 @@ out:
 	return cpu;
 }
 
-void
-mask_irq(int irq)
+void crisv32_mask_irq(int irq)
 {
 	int cpu;
 
@@ -289,8 +288,7 @@ mask_irq(int irq)
 		block_irq(irq, cpu);
 }
 
-void
-unmask_irq(int irq)
+void crisv32_unmask_irq(int irq)
 {
 	unblock_irq(irq, irq_cpu(irq));
 }
@@ -298,23 +296,23 @@ unmask_irq(int irq)
 
 static unsigned int startup_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 	return 0;
 }
 
 static void shutdown_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void enable_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 }
 
 static void disable_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void ack_crisv32_irq(unsigned int irq)
@@ -336,7 +334,7 @@ int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
 }
 
 static struct irq_chip crisv32_irq_type = {
-	.typename =    "CRISv32",
+	.name =        "CRISv32",
 	.startup =     startup_crisv32_irq,
 	.shutdown =    shutdown_crisv32_irq,
 	.enable =      enable_crisv32_irq,
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
index 6eb54ea..f6f3637 100644
--- a/arch/cris/arch-v32/kernel/pinmux.c
+++ b/arch/cris/arch-v32/kernel/pinmux.c
@@ -54,7 +54,7 @@ crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
 
 	crisv32_pinmux_init();
 
-	if (port > PORTS)
+	if (port > PORTS || port < 0)
 		return -EINVAL;
 
 	spin_lock_irqsave(&pinmux_lock, flags);
@@ -197,7 +197,7 @@ crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
 
 	crisv32_pinmux_init();
 
-	if (port > PORTS)
+	if (port > PORTS || port < 0)
 		return -EINVAL;
 
 	spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 120e7f7..2661a95 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -9,9 +9,9 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/fs.h>
-#include <linux/slab.h>
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/timer_defs.h>
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index dd40147..f4ebd1e 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -78,6 +78,35 @@ int put_reg(struct task_struct *task, unsigned int regno, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp;
+
+	/*
+	 * Set up SPC if not set already (in which case we have no other
+	 * choice but to trust it).
+	 */
+	if (!get_reg(child, PT_SPC)) {
+		/* In case we're stopped in a delay slot. */
+		tmp = get_reg(child, PT_ERP) & ~1;
+		put_reg(child, PT_SPC, tmp);
+	}
+	tmp = get_reg(child, PT_CCS) | SBIT_USER;
+	put_reg(child, PT_CCS, tmp);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	put_reg(child, PT_SPC, 0);
+
+	if (!get_debugreg(child->pid, PT_BP_CTRL)) {
+		unsigned long tmp;
+		/* If no h/w bp configured, disable S bit. */
+		tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
+		put_reg(child, PT_CCS, tmp);
+	}
+}
+
 /*
  * Called by kernel/ptrace.c when detaching.
  *
@@ -89,8 +118,7 @@ ptrace_disable(struct task_struct *child)
 	unsigned long tmp;
 
 	/* Deconfigure SPC and S-bit. */
-	tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-	put_reg(child, PT_CCS, tmp);
+	user_disable_single_step(child);
 	put_reg(child, PT_SPC, 0);
 
 	/* Deconfigure any watchpoints associated with the child. */
@@ -169,83 +197,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = 0;
 			break;
 
-		case PTRACE_SYSCALL:
-		case PTRACE_CONT:
-			ret = -EIO;
-
-			if (!valid_signal(data))
-				break;
-
-			/* Continue means no single-step. */
-			put_reg(child, PT_SPC, 0);
-
-			if (!get_debugreg(child->pid, PT_BP_CTRL)) {
-				unsigned long tmp;
-				/* If no h/w bp configured, disable S bit. */
-				tmp = get_reg(child, PT_CCS) & ~SBIT_USER;
-				put_reg(child, PT_CCS, tmp);
-			}
-
-			if (request == PTRACE_SYSCALL) {
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-			else {
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			}
-
-			child->exit_code = data;
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			ret = 0;
-
-			break;
-
-		/* Make the child exit by sending it a sigkill. */
-		case PTRACE_KILL:
-			ret = 0;
-
-			if (child->exit_state == EXIT_ZOMBIE)
-				break;
-
-			child->exit_code = SIGKILL;
-
-			/* Deconfigure single-step and h/w bp. */
-			ptrace_disable(child);
-
-			/* TODO: make sure any pending breakpoint is killed */
-			wake_up_process(child);
-			break;
-
-		/* Set the trap flag. */
-		case PTRACE_SINGLESTEP:	{
-			unsigned long tmp;
-			ret = -EIO;
-
-			/* Set up SPC if not set already (in which case we have
-			   no other choice but to trust it). */
-			if (!get_reg(child, PT_SPC)) {
-				/* In case we're stopped in a delay slot. */
-				tmp = get_reg(child, PT_ERP) & ~1;
-				put_reg(child, PT_SPC, tmp);
-			}
-			tmp = get_reg(child, PT_CCS) | SBIT_USER;
-			put_reg(child, PT_CCS, tmp);
-
-			if (!valid_signal(data))
-				break;
-
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-			/* TODO: set some clever breakpoint mechanism... */
-
-			child->exit_code = data;
-			wake_up_process(child);
-			ret = 0;
-			break;
-
-		}
-
 		/* Get all GP registers from the child. */
 		case PTRACE_GETREGS: {
 			int i;
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 372d0ca..0b7e3f1 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -4,6 +4,7 @@
 
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 058addd..84fed3b 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -168,8 +168,8 @@ void __init smp_callin(void)
 
 	/* Enable IRQ and idle */
 	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
-	unmask_irq(IPI_INTR_VECT);
-	unmask_irq(TIMER0_INTR_VECT);
+	crisv32_unmask_irq(IPI_INTR_VECT);
+	crisv32_unmask_irq(TIMER0_INTR_VECT);
 	preempt_disable();
 	notify_cpu_starting(cpu);
 	local_irq_enable();
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index b1920d8..1ee0e10 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -44,7 +44,6 @@ unsigned long timer_regs[NR_CPUS] =
 #endif
 };
 
-extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
 extern int have_rtc;
 
@@ -198,9 +197,6 @@ handle_watchdog_bite(struct pt_regs* regs)
 #endif
 }
 
-/* Last time the cmos clock got updated. */
-static long last_rtc_update = 0;
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick.
@@ -238,25 +234,6 @@ timer_interrupt(int irq, void *dev_id)
 
 	/* Call the real timer interrupt handler */
 	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 *
-	 * The division here is not time critical since it will run once in
-	 * 11 minutes
-	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* Do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
         return IRQ_HANDLED;
 }
 
@@ -309,23 +286,10 @@ time_init(void)
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0) {
-		/* No RTC, start at 1980 */
-		xtime.tv_sec = 0;
-		xtime.tv_nsec = 0;
+	if(RTC_INIT() < 0)
 		have_rtc = 0;
-	} else {
-		/* Get the current time */
+	else
 		have_rtc = 1;
-		update_xtime_from_cmos();
-	}
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to
-	 * xtime will yield zero, the tv_nsec field must be normalized
-	 * (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* Start CPU local timer. */
 	cris_timer_init();
diff --git a/arch/cris/arch-v32/mach-a3/pinmux.c b/arch/cris/arch-v32/mach-a3/pinmux.c
index 0a28c9b..18648ef 100644
--- a/arch/cris/arch-v32/mach-a3/pinmux.c
+++ b/arch/cris/arch-v32/mach-a3/pinmux.c
@@ -242,7 +242,7 @@ crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
 
 	crisv32_pinmux_init();
 
-	if (port > PORTS)
+	if (port > PORTS || port < 0)
 		return -EINVAL;
 
 	spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c
index 84d31bd..82ef293 100644
--- a/arch/cris/arch-v32/mach-fs/arbiter.c
+++ b/arch/cris/arch-v32/mach-fs/arbiter.c
@@ -332,7 +332,7 @@ int crisv32_arbiter_unwatch(int id)
 	if (id == 0)
 		intr_mask.bp0 = regk_marb_no;
 	else if (id == 1)
-		intr_mask.bp2 = regk_marb_no;
+		intr_mask.bp1 = regk_marb_no;
 	else if (id == 2)
 		intr_mask.bp2 = regk_marb_no;
 	else if (id == 3)
diff --git a/arch/cris/arch-v32/mach-fs/pinmux.c b/arch/cris/arch-v32/mach-fs/pinmux.c
index d722ad9..38f29ee 100644
--- a/arch/cris/arch-v32/mach-fs/pinmux.c
+++ b/arch/cris/arch-v32/mach-fs/pinmux.c
@@ -54,7 +54,7 @@ crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
 
 	crisv32_pinmux_init();
 
-	if (port > PORTS)
+	if (port > PORTS || port < 0)
 		return -EINVAL;
 
 	spin_lock_irqsave(&pinmux_lock, flags);
@@ -195,7 +195,7 @@ int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
 
 	crisv32_pinmux_init();
 
-	if (port > PORTS)
+	if (port > PORTS || port < 0)
 		return -EINVAL;
 
 	spin_lock_irqsave(&pinmux_lock, flags);
diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S
index 2238d15..f125d91 100644
--- a/arch/cris/arch-v32/mm/mmu.S
+++ b/arch/cris/arch-v32/mm/mmu.S
@@ -115,7 +115,7 @@
 #ifdef CONFIG_SMP
 	move    $s7, $acr	; PGD
 #else
-	move.d  per_cpu__current_pgd, $acr ; PGD
+	move.d  current_pgd, $acr ; PGD
 #endif
 	; Look up PMD in PGD
 	lsrq	24, $r0	; Get PMD index into PGD (bit 24-31)
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb..c030d02 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		spin_unlock(&mmu_context_lock);
 
 		/*
-		 * Remember the pgd for the fault handlers. Keep a seperate
+		 * Remember the pgd for the fault handlers. Keep a separate
 		 * copy of it because current and active_mm might be invalid
 		 * at points where * there's still a need to derefer the pgd.
 		 */
diff --git a/arch/cris/include/arch-v10/arch/irq.h b/arch/cris/include/arch-v10/arch/irq.h
index 6248004..7d34594 100644
--- a/arch/cris/include/arch-v10/arch/irq.h
+++ b/arch/cris/include/arch-v10/arch/irq.h
@@ -93,15 +93,16 @@ void set_break_vector(int n, irqvectptr addr);
   "push $r10\n\t"       /* push orig_r10 */ \
   "clear.d [$sp=$sp-4]\n\t"  /* frametype - this is a normal stackframe */
 
-  /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
+/* BLOCK_IRQ and UNBLOCK_IRQ do the same as
+ * crisv10_mask_irq and crisv10_unmask_irq */
 
 #define BLOCK_IRQ(mask,nr) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000d8]\n\t" 
-  
+  "move.d $r0,[0xb00000d8]\n\t"
+
 #define UNBLOCK_IRQ(mask) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000dc]\n\t" 
+  "move.d $r0,[0xb00000dc]\n\t"
 
 #define IRQ_NAME2(nr) nr##_interrupt(void)
 #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h
index 9e4c9fb..b31e998 100644
--- a/arch/cris/include/arch-v32/arch/irq.h
+++ b/arch/cris/include/arch-v32/arch/irq.h
@@ -23,8 +23,8 @@ struct etrax_interrupt_vector {
 
 extern struct etrax_interrupt_vector *etrax_irv;	/* head.S */
 
-void mask_irq(int irq);
-void unmask_irq(int irq);
+void crisv32_mask_irq(int irq);
+void crisv32_unmask_irq(int irq);
 
 void set_exception_vector(int n, irqvectptr addr);
 
diff --git a/arch/cris/include/arch-v32/arch/ptrace.h b/arch/cris/include/arch-v32/arch/ptrace.h
index 41f4e86..ffca8d0 100644
--- a/arch/cris/include/arch-v32/arch/ptrace.h
+++ b/arch/cris/include/arch-v32/arch/ptrace.h
@@ -108,6 +108,7 @@ struct switch_stack {
 
 #ifdef __KERNEL__
 
+#define arch_has_single_step() (1)
 #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
 #define instruction_pointer(regs) ((regs)->erp)
 extern void show_regs(struct pt_regs *);
diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h
index a6aca81..88dc9b9 100644
--- a/arch/cris/include/asm/atomic.h
+++ b/arch/cris/include/asm/atomic.h
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 #define atomic_set(v,i) (((v)->counter) = (i))
 
 /* These should be written in asm but we do it in C for now. */
diff --git a/arch/cris/include/asm/param.h b/arch/cris/include/asm/param.h
index 0e47994..484fcf8 100644
--- a/arch/cris/include/asm/param.h
+++ b/arch/cris/include/asm/param.h
@@ -2,22 +2,9 @@
 #define _ASMCRIS_PARAM_H
 
 /* Currently we assume that HZ=100 is good for CRIS. */
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
 
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
-#endif
+#endif /* _ASMCRIS_PARAM_H */
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index 730ce40..9f1cd56 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -44,14 +44,6 @@ struct pci_dev;
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 1fcce00..99ea6cd 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -270,7 +270,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; /* defined in head.S */
  * Actually I am not sure on what this could be used for.
  */
 static inline void update_mmu_cache(struct vm_area_struct * vma,
-	unsigned long address, pte_t pte)
+	unsigned long address, pte_t *ptep)
 {
 }
 
diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h
index faff53a..249a784 100644
--- a/arch/cris/include/asm/scatterlist.h
+++ b/arch/cris/include/asm/scatterlist.h
@@ -1,22 +1,7 @@
 #ifndef __ASM_CRIS_SCATTERLIST_H
 #define __ASM_CRIS_SCATTERLIST_H
 
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	char *  address;    /* Location data is to be transferred to */
-	unsigned int length;
-
-	/* The following is i386 highmem junk - not used by us */
-	unsigned long page_link;
-	unsigned int offset;/* for highmem, page offset */
-
-};
-
-#define sg_dma_address(sg)	((sg)->address)
-#define sg_dma_len(sg)		((sg)->length)
-/* i386 junk */
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x1fffffff)
 
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index c3aade3..9177606 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -85,7 +85,7 @@ struct thread_info {
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index c170793..f6fad83 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -352,6 +352,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -364,6 +365,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index b5ce072..469f7f9 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -29,7 +29,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
@@ -63,7 +62,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
-		seq_printf(p, " %14s", irq_desc[i].chip->typename);
+		seq_printf(p, " %14s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)
diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c
index abc13e3..bcd502f 100644
--- a/arch/cris/kernel/module.c
+++ b/arch/cris/kernel/module.c
@@ -21,6 +21,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 
 #if 0
 #define DEBUGP printk
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 9aa5711..b917549 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -2,6 +2,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index c2bbb1a..7aa036e 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -26,24 +26,6 @@
 #include <asm/uaccess.h>
 #include <asm/segment.h>
 
-asmlinkage unsigned long old_mmap(unsigned long __user *args)
-{        
-	unsigned long buffer[6];
-	int err = -EFAULT;
-
-	if (copy_from_user(&buffer, args, sizeof(buffer)))
-		goto out;
-
-	err = -EINVAL;
-	if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */
-		goto out;
-
-	err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3],
-                       buffer[4], buffer[5] >> PAGE_SHIFT);
-out:
-	return err;
-}
-
 asmlinkage long
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
           unsigned long flags, unsigned long fd, unsigned long pgoff)
@@ -51,81 +33,3 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	/* bug(?): 8Kb pages here */
         return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. (same as arch/i386)
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-			
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr, 
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT: {
-                ulong raddr;
-                ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-                if (ret)
-                        return ret;
-                return put_user (raddr, (ulong __user *) third);
-        }
-	case SHMDT: 
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index 074fe7d..c72730d 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -42,75 +42,11 @@ unsigned long loops_per_usec;
 extern unsigned long do_slow_gettimeoffset(void);
 static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- *
- * Note: Division is quite slow on CRIS and do_gettimeofday is called
- *       rather often. Maybe we should do some kind of approximation here
- *       (a naive approximation would be to divide by 1024).
- */
-void do_gettimeofday(struct timeval *tv)
+u32 arch_gettimeoffset(void)
 {
-	unsigned long flags;
-	signed long usec, sec;
-	local_irq_save(flags);
-	usec = do_gettimeoffset();
-
-        /*
-	 * If time_adjust is negative then NTP is slowing the clock
-	 * so make sure not to go into next possible interval.
-	 * Better to lose some accuracy than have time go backwards..
-	 */
-	if (unlikely(time_adjust < 0) && usec > tickadj)
-		usec = tickadj;
-
-	sec = xtime.tv_sec;
-	usec += xtime.tv_nsec / 1000;
-	local_irq_restore(flags);
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
+	return do_gettimeoffset() * 1000;
 }
 
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= do_gettimeoffset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-
 /*
  * BUG: This routine does not handle hour overflow properly; it just
  *      sets the minutes. Usually you'll only notice that after reboot!
@@ -162,6 +98,8 @@ unsigned long
 get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
+	if(!have_rtc)
+		return 0;
 
 	sec = CMOS_READ(RTC_SECONDS);
 	min = CMOS_READ(RTC_MINUTES);
@@ -183,19 +121,19 @@ get_cmos_time(void)
 	return mktime(year, mon, day, hour, min, sec);
 }
 
-/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
- * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
- */
 
-void
-update_xtime_from_cmos(void)
+int update_persistent_clock(struct timespec now)
 {
-	if(have_rtc) {
-		xtime.tv_sec = get_cmos_time();
-		xtime.tv_nsec = 0;
-	}
+	return set_rtc_mmss(now.tv_sec);
 }
 
+void read_persistent_clock(struct timespec *ts)
+{
+	ts->tv_sec = get_cmos_time();
+	ts->tv_nsec = 0;
+}
+
+
 extern void cris_profile_sample(struct pt_regs* regs);
 
 void
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index ff68b9f..df33ab8 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <asm/tlb.h>
diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 00a57af..fae32c7 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -36,7 +36,7 @@
 #define smp_mb__after_atomic_inc()	barrier()
 
 #define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = (i))
 
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
index b289887..6af5d83 100644
--- a/arch/frv/include/asm/dma-mapping.h
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -7,6 +7,11 @@
 #include <asm/scatterlist.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
@@ -16,24 +21,9 @@ extern unsigned long __nongprelbss dma_coherent_mem_end;
 void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
 void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 				 enum dma_data_direction direction);
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -41,30 +31,9 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		      enum dma_data_direction direction);
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	     enum dma_data_direction direction)
diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h
index 2da7164..e6bedd0 100644
--- a/arch/frv/include/asm/gdb-stub.h
+++ b/arch/frv/include/asm/gdb-stub.h
@@ -12,6 +12,7 @@
 #ifndef __ASM_GDB_STUB_H
 #define __ASM_GDB_STUB_H
 
+#undef GDBSTUB_DEBUG_IO
 #undef GDBSTUB_DEBUG_PROTOCOL
 
 #include <asm/ptrace.h>
@@ -108,6 +109,12 @@ extern void gdbstub_printk(const char *fmt, ...);
 extern void debug_to_serial(const char *p, int n);
 extern void console_set_baud(unsigned baud);
 
+#ifdef GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT,...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT,...) ({ 0; })
+#endif
+
 #ifdef GDBSTUB_DEBUG_PROTOCOL
 #define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
 #else
diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h
index 2947764..ccae981 100644
--- a/arch/frv/include/asm/mem-layout.h
+++ b/arch/frv/include/asm/mem-layout.h
@@ -35,8 +35,8 @@
  * the slab must be aligned such that load- and store-double instructions don't
  * fault if used
  */
-#define	ARCH_KMALLOC_MINALIGN		8
-#define	ARCH_SLAB_MINALIGN		8
+#define	ARCH_KMALLOC_MINALIGN		L1_CACHE_BYTES
+#define	ARCH_SLAB_MINALIGN		L1_CACHE_BYTES
 
 /*****************************************************************************/
 /*
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index 492b5c4..0d59979 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -43,14 +43,6 @@ extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
@@ -68,41 +60,4 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 #define PCIBIOS_MIN_IO		0x100
 #define PCIBIOS_MIN_MEM		0x00010000
 
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, the
- * device again owns the buffer.
- */
-static inline void pci_dma_sync_single(struct pci_dev *hwdev,
-				       dma_addr_t dma_handle,
-				       size_t size, int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-
-	frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
-			    (unsigned long)bus_to_virt(dma_handle) + size);
-}
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
-				   struct scatterlist *sg,
-				   int nelems, int direction)
-{
-	int i;
-	BUG_ON(direction == PCI_DMA_NONE);
-
-	for (i = 0; i < nelems; i++)
-		frv_cache_wback_inv(sg_dma_address(&sg[i]),
-				    sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
-}
-
 #endif /* _ASM_FRV_PCI_H */
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 22c6069..c18b0d3 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -505,7 +505,7 @@ static inline int pte_file(pte_t pte)
 /*
  * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
  */
-static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
 	struct mm_struct *mm;
 	unsigned long ampr;
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
index a54b535..6bfad4c 100644
--- a/arch/frv/include/asm/ptrace.h
+++ b/arch/frv/include/asm/ptrace.h
@@ -84,8 +84,6 @@ extern void show_regs(struct pt_regs *);
 #define task_pt_regs(task) ((task)->thread.frame0)
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h
index 4bca8a2..1614bfd 100644
--- a/arch/frv/include/asm/scatterlist.h
+++ b/arch/frv/include/asm/scatterlist.h
@@ -1,45 +1,7 @@
 #ifndef _ASM_SCATTERLIST_H
 #define _ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_buf(sg, some_ptr, length);
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* for highmem, page offset */
-
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0xffffffffUL)
 
diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h
index e3616a6..a2320a4 100644
--- a/arch/frv/include/asm/segment.h
+++ b/arch/frv/include/asm/segment.h
@@ -21,12 +21,12 @@ typedef struct {
 
 #define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
 
-#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
-
 #ifdef CONFIG_MMU
 #define USER_DS			MAKE_MM_SEG(TASK_SIZE - 1)
+#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
 #else
-#define USER_DS			KERNEL_DS
+#define USER_DS			MAKE_MM_SEG(memory_end)
+#define KERNEL_DS		MAKE_MM_SEG(0xe0000000UL)
 #endif
 
 #define get_ds()		(KERNEL_DS)
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e608e05..11f33ea 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -113,7 +113,7 @@ register struct thread_info *__current_thread_info asm("gr15");
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17	/* OOM killer killed process */
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h
index 53650c9..0b67ec5 100644
--- a/arch/frv/include/asm/uaccess.h
+++ b/arch/frv/include/asm/uaccess.h
@@ -27,8 +27,6 @@
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
-#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
-
 /*
  * check that a range of addresses falls within the current address limit
  */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index be6ef0f..b28da49 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 /* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 /* #define __ARCH_WANT_SYS_SGETMASK */
 /* #define __ARCH_WANT_SYS_SIGNAL */
diff --git a/arch/frv/kernel/gdb-io.c b/arch/frv/kernel/gdb-io.c
index c997bcc..2ca641d 100644
--- a/arch/frv/kernel/gdb-io.c
+++ b/arch/frv/kernel/gdb-io.c
@@ -171,11 +171,11 @@ int gdbstub_rx_char(unsigned char *_ch, int nonblock)
 		return -EINTR;
 	}
 	else if (st & (UART_LSR_FE|UART_LSR_OE|UART_LSR_PE)) {
-		gdbstub_proto("### GDB Rx Error (st=%02x) ###\n",st);
+		gdbstub_io("### GDB Rx Error (st=%02x) ###\n",st);
 		return -EIO;
 	}
 	else {
-		gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n",ch,st);
+		gdbstub_io("### GDB Rx %02x (st=%02x) ###\n",ch,st);
 		*_ch = ch & 0x7f;
 		return 0;
 	}
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 7ca8a6b..a4dba6b 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -1344,6 +1344,44 @@ void gdbstub_get_mmu_state(void)
 
 } /* end gdbstub_get_mmu_state() */
 
+/*
+ * handle general query commands of the form 'qXXXXX'
+ */
+static void gdbstub_handle_query(void)
+{
+	if (strcmp(input_buffer, "qAttached") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "1");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qC") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "QC 0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qOffsets") == 0) {
+		/* return relocation offset of text and data segments */
+		sprintf(output_buffer, "Text=0;Data=0;Bss=0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSymbol::") == 0) {
+		sprintf(output_buffer, "OK");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSupported") == 0) {
+		/* query of supported features */
+		sprintf(output_buffer, "PacketSize=%u;ReverseContinue-;ReverseStep-",
+			sizeof(input_buffer));
+		return;
+	}
+
+	gdbstub_strcpy(output_buffer,"E01");
+}
+
 /*****************************************************************************/
 /*
  * handle event interception and GDB remote protocol processing
@@ -1751,6 +1789,12 @@ void gdbstub(int sigval)
 			flush_cache = 1;
 			break;
 
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
 			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
 		case 'P':
 			ptr = &input_buffer[1];
@@ -1840,6 +1884,10 @@ void gdbstub(int sigval)
 		case 'k' :
 			goto done;	/* just continue */
 
+			/* detach */
+		case 'D':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
 
 			/* reset the whole machine (FIXME: system dependent) */
 		case 'r':
@@ -1852,6 +1900,14 @@ void gdbstub(int sigval)
 			__debug_status.dcr |= DCR_SE;
 			goto done;
 
+			/* extended command */
+		case 'v':
+			if (strcmp(input_buffer, "vCont?") == 0) {
+				output_buffer[0] = 0;
+				break;
+			}
+			goto unsupported_cmd;
+
 			/* set baud rate (bBB) */
 		case 'b':
 			ptr = &input_buffer[1];
@@ -1923,8 +1979,19 @@ void gdbstub(int sigval)
 			gdbstub_strcpy(output_buffer,"OK");
 			break;
 
+			/* Thread-setting packet */
+		case 'H':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
+
+		case 'q':
+			gdbstub_handle_query();
+			break;
+
 		default:
+		unsupported_cmd:
 			gdbstub_proto("### GDB Unsupported Cmd '%s'\n",input_buffer);
+			gdbstub_strcpy(output_buffer,"E01");
 			break;
 		}
 
diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c
index 62d1aba..6251366 100644
--- a/arch/frv/kernel/irq.c
+++ b/arch/frv/kernel/irq.c
@@ -16,7 +16,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c
index 60eeed3..fac0289 100644
--- a/arch/frv/kernel/ptrace.c
+++ b/arch/frv/kernel/ptrace.c
@@ -344,26 +344,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     0, sizeof(child->thread.user->f),
 					     (const void __user *)data);
 
-	case PTRACE_GETFDPIC:
-		tmp = 0;
-		switch (addr) {
-		case PTRACE_GETFDPIC_EXEC:
-			tmp = child->mm->context.exec_fdpic_loadmap;
-			break;
-		case PTRACE_GETFDPIC_INTERP:
-			tmp = child->mm->context.interp_fdpic_loadmap;
-			break;
-		default:
-			break;
-		}
-
-		ret = 0;
-		if (put_user(tmp, (unsigned long *) data)) {
-			ret = -EFAULT;
-			break;
-		}
-		break;
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index 1d3d4c9..9c49808 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -42,92 +42,3 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd,
 			      pgoff >> (PAGE_SHIFT - 12));
 }
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(unsigned long call,
-			unsigned long first,
-			unsigned long second,
-			unsigned long third,
-			void __user *ptr,
-			unsigned long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-				      (const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c
index 035516cb..6c155d6 100644
--- a/arch/frv/kernel/sysctl.c
+++ b/arch/frv/kernel/sysctl.c
@@ -9,7 +9,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
@@ -47,8 +46,9 @@ static void frv_change_dcache_mode(unsigned long newmode)
 /*
  * handle requests to dynamically switch the write caching mode delivered by /proc
  */
-static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
-				 void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_cachemode(ctl_table *table, int write,
+				 void __user *buffer, size_t *lenp,
+				 loff_t *ppos)
 {
 	unsigned long hsr0;
 	char buff[8];
@@ -85,7 +85,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
 	}
 
 	/* read the state */
-	if (filp->f_pos > 0) {
+	if (*ppos > 0) {
 		*lenp = 0;
 		return 0;
 	}
@@ -111,7 +111,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
 		return -EFAULT;
 
 	*lenp = len;
-	filp->f_pos = len;
+	*ppos = len;
 	return 0;
 
 } /* end procctl_frv_cachemode() */
@@ -121,8 +121,9 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
  * permit the mm_struct the nominated process is using have its MMU context ID pinned
  */
 #ifdef CONFIG_MMU
-static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_pin_cxnr(ctl_table *table, int write,
+				void __user *buffer, size_t *lenp,
+				loff_t *ppos)
 {
 	pid_t pid;
 	char buff[16], *p;
@@ -151,7 +152,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
 	}
 
 	/* read the currently pinned CXN */
-	if (filp->f_pos > 0) {
+	if (*ppos > 0) {
 		*lenp = 0;
 		return 0;
 	}
@@ -164,7 +165,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
 		return -EFAULT;
 
 	*lenp = len;
-	filp->f_pos = len;
+	*ppos = len;
 	return 0;
 
 } /* end procctl_frv_pin_cxnr() */
diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c
index fb0ce75..0ddbbae 100644
--- a/arch/frv/kernel/time.c
+++ b/arch/frv/kernel/time.c
@@ -48,20 +48,12 @@ static struct irqaction timer_irq  = {
 	.name = "timer",
 };
 
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return -1;
-}
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 static irqreturn_t timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update = 0;
-
 	profile_tick(CPU_PROFILING);
 	/*
 	 * Here we are in the timer irq handler. We just have irqs locally
@@ -74,22 +66,6 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
 
 	do_timer(1);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2
-	    ) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-
 #ifdef CONFIG_HEARTBEAT
 	static unsigned short n;
 	n++;
@@ -119,7 +95,8 @@ void time_divisor_init(void)
 	__set_TCSR_DATA(0, base >> 8);
 }
 
-void time_init(void)
+
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -135,9 +112,12 @@ void time_init(void)
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
+}
 
+void time_init(void)
+{
 	/* install scheduling interrupt handler */
 	setup_irq(IRQ_CPU_TIMER0, &timer_irq);
 
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4e1ba0b..e47857f 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -106,13 +106,6 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either dma_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -125,22 +118,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -157,13 +134,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 45954f0..85d110b 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -38,13 +37,6 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_
 
 EXPORT_SYMBOL(dma_free_coherent);
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
 {
@@ -57,22 +49,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 
 EXPORT_SYMBOL(dma_map_single);
 
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above dma_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	       enum dma_data_direction direction)
 {
@@ -103,13 +79,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 EXPORT_SYMBOL(dma_map_sg);
 
-/*
- * Map a single page of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Device ownership issues as mentioned above for dma_map_single are
- * the same here.
- */
 dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
 			size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 566bdeb..6b4fb28 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -32,18 +32,16 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
+	resource_size_t start = res->start;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	return start;
 }
 
 
@@ -96,8 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->start)
 					continue;
-				if (pci_claim_resource(dev, idx) < 0)
-					printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
+				pci_claim_resource(dev, idx);
 			}
 		}
 		pcibios_allocate_bus_resources(&bus->children);
@@ -127,7 +124,6 @@ static void __init pcibios_allocate_resources(int pass)
 				DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
 				    r->start, r->end, r->flags, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c
index ba58752..20f6497 100644
--- a/arch/frv/mb93090-mb00/pci-irq.c
+++ b/arch/frv/mb93090-mb00/pci-irq.c
@@ -9,7 +9,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index c0dcec6..f8dd37e 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -16,7 +16,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/slab.h>
 
 #include <asm/segment.h>
 #include <asm/io.h>
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
index 44840e7..7a73aae 100644
--- a/arch/frv/mm/dma-alloc.c
+++ b/arch/frv/mm/dma-alloc.c
@@ -37,6 +37,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/hardirq.h>
+#include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
 #include <asm/io.h>
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 30f5d10..a325d57 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -257,10 +257,10 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
  */
  out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(__frame))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(__frame))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 0708284..ed64588 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -19,6 +19,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/pagemap.h>
+#include <linux/gfp.h>
 #include <linux/swap.h>
 #include <linux/mm.h>
 #include <linux/kernel.h>
diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c
index 66f616f..c42c83d 100644
--- a/arch/frv/mm/pgalloc.c
+++ b/arch/frv/mm/pgalloc.c
@@ -10,7 +10,7 @@
  */
 
 #include <linux/sched.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/quicklist.h>
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
index 33c8c0f..e936804 100644
--- a/arch/h8300/include/asm/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
@@ -10,7 +10,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 #include <asm/system.h>
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f..c1a8df2 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
index c2e05e4..d866c0e 100644
--- a/arch/h8300/include/asm/ptrace.h
+++ b/arch/h8300/include/asm/ptrace.h
@@ -55,6 +55,8 @@ struct pt_regs {
 /* Find the stack offset for a register, relative to thread.esp0. */
 #define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
 
+#define arch_has_single_step()	(1)
+
 #define user_mode(regs) (!((regs)->ccr & PS_S))
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
index d3ecdd8..de08a4a 100644
--- a/arch/h8300/include/asm/scatterlist.h
+++ b/arch/h8300/include/asm/scatterlist.h
@@ -1,17 +1,7 @@
 #ifndef _H8300_SCATTERLIST_H
 #define _H8300_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD	(0xffffffff)
 
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 70e67e47..d6f1784 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -87,7 +87,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
index 99f3c35..50f2c5a 100644
--- a/arch/h8300/include/asm/unistd.h
+++ b/arch/h8300/include/asm/unistd.h
@@ -336,6 +336,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -348,6 +349,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index bd883fa..8c8b0ff 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -32,11 +32,11 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
index d32bbf0..df11412 100644
--- a/arch/h8300/kernel/ptrace.c
+++ b/arch/h8300/kernel/ptrace.c
@@ -34,25 +34,20 @@
 /* cpu depend functions */
 extern long h8300_get_reg(struct task_struct *task, int regno);
 extern int  h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-extern void h8300_disable_trace(struct task_struct *child);
-extern void h8300_enable_trace(struct task_struct *child);
+
+
+void user_disable_single_step(struct task_struct *child)
+{
+}
 
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
 
-inline
-static int read_long(struct task_struct * tsk, unsigned long addr,
-	unsigned long * result)
-{
-	*result = *(unsigned long *)addr;
-	return 0;
-}
-
 void ptrace_disable(struct task_struct *child)
 {
-	h8300_disable_trace(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -60,17 +55,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA: {
-			unsigned long tmp;
-
-			ret = read_long(child, addr, &tmp);
-			if (ret < 0)
-				break ;
-			ret = put_user(tmp, (unsigned long *) data);
-			break ;
-		}
-
 	/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp = 0;
@@ -109,11 +93,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 
       /* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) {
 				ret = -EIO;
@@ -131,53 +110,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			}
 			ret = -EIO;
 			break ;
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break ;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			wake_up_process(child);
-			/* make sure the single step bit is not set. */
-			h8300_disable_trace(child);
-			ret = 0;
-		}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill. 
- * perhaps it should be put in the status that it wants to 
- * exit.
- */
-		case PTRACE_KILL: {
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			h8300_disable_trace(child);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			h8300_enable_trace(child);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
 
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
@@ -210,7 +142,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index b5969db..f9b3f44 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -26,144 +26,6 @@
 #include <asm/traps.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong *) third);
-			}
-			}
-		case SHMDT: 
-			return sys_shmdt ((char *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- no support.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 2d69881..faefaff 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -96,7 +96,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_settimeofday)
 	.long SYMBOL_NAME(sys_getgroups16)	/* 80 */
 	.long SYMBOL_NAME(sys_setgroups16)
-	.long SYMBOL_NAME(old_select)
+	.long SYMBOL_NAME(sys_old_select)
 	.long SYMBOL_NAME(sys_symlink)
 	.long SYMBOL_NAME(sys_lstat)
 	.long SYMBOL_NAME(sys_readlink)		/* 85 */
@@ -104,7 +104,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_swapon)
 	.long SYMBOL_NAME(sys_reboot)
 	.long SYMBOL_NAME(sys_old_readdir)
-	.long SYMBOL_NAME(old_mmap)		/* 90 */
+	.long SYMBOL_NAME(sys_old_mmap)		/* 90 */
 	.long SYMBOL_NAME(sys_munmap)
 	.long SYMBOL_NAME(sys_truncate)
 	.long SYMBOL_NAME(sys_ftruncate)
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
index 7f2d6cf..165005a 100644
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@@ -41,7 +41,7 @@ void h8300_timer_tick(void)
 	update_process_times(user_mode(get_irq_regs()));
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -56,8 +56,12 @@ void __init time_init(void)
 #endif
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
 
 	h8300_timer_setup();
 }
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index 9942f24..7cc3380 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -30,7 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c
index 5c7af09..944a502 100644
--- a/arch/h8300/mm/kmap.c
+++ b/arch/h8300/mm/kmap.c
@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include <asm/setup.h>
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
index ccd6ade..5552ddf 100644
--- a/arch/h8300/mm/memory.c
+++ b/arch/h8300/mm/memory.c
@@ -21,7 +21,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
@@ -44,8 +43,8 @@ void cache_push_v (unsigned long vaddr, int len)
 {
 }
 
-/* Map some physical address range into the kernel address space. The
- * code is copied and adapted from map_chunk().
+/*
+ * Map some physical address range into the kernel address space.
  */
 
 unsigned long kernel_map(unsigned long paddr, unsigned long size,
diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c
index 746b1ae..4f1ed02 100644
--- a/arch/h8300/platform/h8300h/ptrace_h8300h.c
+++ b/arch/h8300/platform/h8300h/ptrace_h8300h.c
@@ -60,7 +60,7 @@ int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	if((long)child->thread.breakinfo.addr != -1L) {
 		*child->thread.breakinfo.addr = child->thread.breakinfo.inst;
@@ -264,7 +264,7 @@ static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
 
 /* Set breakpoint(s) to simulate a single step from the current PC.  */
 
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	unsigned short *nextpc;
 	nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
@@ -276,7 +276,7 @@ void h8300_enable_trace(struct task_struct *child)
 asmlinkage void trace_trap(unsigned long bp)
 {
 	if ((unsigned long)current->thread.breakinfo.addr == bp) {
-		h8300_disable_trace(current);
+		user_disable_single_step(current);
 		force_sig(SIGTRAP,current);
 	} else
 	        force_sig(SIGILL,current);
diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c
index e8cd46f..c058ab1 100644
--- a/arch/h8300/platform/h8s/ptrace_h8s.c
+++ b/arch/h8300/platform/h8s/ptrace_h8s.c
@@ -65,13 +65,13 @@ int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
 }
 
 /* disable singlestep */
-void h8300_disable_trace(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
 }
 
 /* enable singlestep */
-void h8300_enable_trace(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
 {
 	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
 }
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 2d7f56a..9561082 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -53,10 +53,13 @@ config MMU
 	bool
 	default y
 
-config SWIOTLB
-       bool
+config NEED_DMA_MAP_STATE
+	def_bool y
 
-config IOMMU_HELPER
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config SWIOTLB
        bool
 
 config GENERIC_LOCKBREAK
@@ -495,26 +498,17 @@ config HAVE_ARCH_NODEDATA_EXTENSION
 	def_bool y
 	depends on NUMA
 
-config ARCH_PROC_KCORE_TEXT
+config USE_PERCPU_NUMA_NODE_ID
 	def_bool y
-	depends on PROC_KCORE
-
-config IA32_SUPPORT
-	bool "Support for Linux/x86 binaries"
-	help
-	  IA-64 processors can execute IA-32 (X86) instructions.  By
-	  saying Y here, the kernel will include IA-32 system call
-	  emulation support which makes it possible to transparently
-	  run IA-32 Linux binaries on an IA-64 Linux system.
-	  If in doubt, say Y.
+	depends on NUMA
 
-config COMPAT
-	bool
-	depends on IA32_SUPPORT
-	default y
+config HAVE_MEMORYLESS_NODES
+	def_bool y
+	depends on NUMA
 
-config COMPAT_FOR_U64_ALIGNMENT
-	def_bool COMPAT
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+	depends on PROC_KCORE
 
 config IA64_MCA_RECOVERY
 	tristate "MCA recovery from errors other than TLB."
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 62b10f5..be7bfa1 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -46,7 +46,6 @@ head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
 
 libs-y				+= arch/ia64/lib/
 core-y				+= arch/ia64/kernel/ arch/ia64/mm/
-core-$(CONFIG_IA32_SUPPORT)	+= arch/ia64/ia32/
 core-$(CONFIG_IA64_DIG) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_DIG_VTD) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index ace4109..312b120 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -131,8 +131,6 @@ CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 # CONFIG_VIRTUAL_MEM_MAP is not set
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
 # CONFIG_IA64_MCA_RECOVERY is not set
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 7564549..6a4cc50 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -205,8 +205,6 @@ CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index e86fbd3..2dc185b 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -139,8 +139,6 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index 546a772..21a23cd 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -130,8 +130,6 @@ CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 # CONFIG_VIRTUAL_MEM_MAP is not set
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
 # CONFIG_IA64_MCA_RECOVERY is not set
 # CONFIG_PERFMON is not set
 CONFIG_IA64_PALINFO=m
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index c522edf..c5a5ea9 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -154,7 +154,6 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
-# CONFIG_IA32_SUPPORT is not set
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 0bb0714..c67eafc 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -200,8 +200,6 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
-# CONFIG_IA32_SUPPORT is not set
-# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 514f063..3cec65b 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -150,8 +150,6 @@ CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
diff --git a/arch/ia64/hp/common/aml_nfw.c b/arch/ia64/hp/common/aml_nfw.c
index 4abd2c79..2207848 100644
--- a/arch/ia64/hp/common/aml_nfw.c
+++ b/arch/ia64/hp/common/aml_nfw.c
@@ -77,7 +77,7 @@ static void aml_nfw_execute(struct ia64_nfw_context *c)
 		     c->arg[4], c->arg[5], c->arg[6], c->arg[7]);
 }
 
-static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value)
+static void aml_nfw_read_arg(u8 *offset, u32 bit_width, u64 *value)
 {
 	switch (bit_width) {
 	case 8:
@@ -95,7 +95,7 @@ static void aml_nfw_read_arg(u8 *offset, u32 bit_width, acpi_integer *value)
 	}
 }
 
-static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value)
+static void aml_nfw_write_arg(u8 *offset, u32 bit_width, u64 *value)
 {
 	switch (bit_width) {
 	case 8:
@@ -114,7 +114,7 @@ static void aml_nfw_write_arg(u8 *offset, u32 bit_width, acpi_integer *value)
 }
 
 static acpi_status aml_nfw_handler(u32 function, acpi_physical_address address,
-	u32 bit_width, acpi_integer *value, void *handler_context,
+	u32 bit_width, u64 *value, void *handler_context,
 	void *region_context)
 {
 	struct ia64_nfw_context *context = handler_context;
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index e14c492..4ce8d13 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2046,13 +2046,13 @@ acpi_sba_ioc_add(struct acpi_device *device)
 	struct ioc *ioc;
 	acpi_status status;
 	u64 hpa, length;
-	struct acpi_device_info *dev_info;
+	struct acpi_device_info *adi;
 
 	status = hp_acpi_csr_space(device->handle, &hpa, &length);
 	if (ACPI_FAILURE(status))
 		return 1;
 
-	status = acpi_get_object_info(device->handle, &dev_info);
+	status = acpi_get_object_info(device->handle, &adi);
 	if (ACPI_FAILURE(status))
 		return 1;
 
@@ -2060,13 +2060,13 @@ acpi_sba_ioc_add(struct acpi_device *device)
 	 * For HWP0001, only SBA appears in ACPI namespace.  It encloses the PCI
 	 * root bridges, and its CSR space includes the IOC function.
 	 */
-	if (strncmp("HWP0001", dev_info->hardware_id.string, 7) == 0) {
+	if (strncmp("HWP0001", adi->hardware_id.string, 7) == 0) {
 		hpa += ZX1_IOC_OFFSET;
 		/* zx1 based systems default to kernel page size iommu pages */
 		if (!iovp_shift)
 			iovp_shift = min(PAGE_SHIFT, 16);
 	}
-	kfree(dev_info);
+	kfree(adi);
 
 	/*
 	 * default anything not caught above or specified on cmdline to 4k
diff --git a/arch/ia64/ia32/Makefile b/arch/ia64/ia32/Makefile
deleted file mode 100644
index baad8c7..0000000
--- a/arch/ia64/ia32/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the ia32 kernel emulation subsystem.
-#
-
-obj-y := ia32_entry.o sys_ia32.o ia32_signal.o \
-	 ia32_support.o ia32_traps.o binfmt_elf32.o ia32_ldt.o
-obj-$(CONFIG_AUDIT) += audit.o
-
-# Don't let GCC uses f16-f31 so that save_ia32_fpstate_live() and
-# restore_ia32_fpstate_live() can be sure the live register contain user-level state.
-CFLAGS_ia32_signal.o += -mfixed-range=f16-f31
diff --git a/arch/ia64/ia32/audit.c b/arch/ia64/ia32/audit.c
deleted file mode 100644
index 5c93ddd..0000000
--- a/arch/ia64/ia32/audit.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "../../x86/include/asm/unistd_32.h"
-
-unsigned ia32_dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-unsigned ia32_chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-unsigned ia32_write_class[] = {
-#include <asm-generic/audit_write.h>
-~0U
-};
-
-unsigned ia32_read_class[] = {
-#include <asm-generic/audit_read.h>
-~0U
-};
-
-unsigned ia32_signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
-int ia32_classify_syscall(unsigned syscall)
-{
-	switch(syscall) {
-	case __NR_open:
-		return 2;
-	case __NR_openat:
-		return 3;
-	case __NR_socketcall:
-		return 4;
-	case __NR_execve:
-		return 5;
-	default:
-		return 1;
-	}
-}
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
deleted file mode 100644
index c69552b..0000000
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * IA-32 ELF support.
- *
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2001 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00	A. Mallick	initialize csd/ssd/tssd/cflg for ia32_load_state
- * 04/13/01	D. Mosberger	dropped saving tssd in ar.k1---it's not needed
- * 09/14/01	D. Mosberger	fixed memory management for gdt/tss page
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/security.h>
-
-#include <asm/param.h>
-#include <asm/signal.h>
-
-#include "ia32priv.h"
-#include "elfcore32.h"
-
-/* Override some function names */
-#undef start_thread
-#define start_thread			ia32_start_thread
-#define elf_format			elf32_format
-#define init_elf_binfmt			init_elf32_binfmt
-#define exit_elf_binfmt			exit_elf32_binfmt
-
-#undef CLOCKS_PER_SEC
-#define CLOCKS_PER_SEC	IA32_CLOCKS_PER_SEC
-
-extern void ia64_elf32_init (struct pt_regs *regs);
-
-static void elf32_set_personality (void);
-
-static unsigned long __attribute ((unused))
-randomize_stack_top(unsigned long stack_top);
-
-#define setup_arg_pages(bprm,tos,exec)		ia32_setup_arg_pages(bprm,exec)
-#define elf_map				elf32_map
-
-#undef SET_PERSONALITY
-#define SET_PERSONALITY(ex)	elf32_set_personality()
-
-#define elf_read_implies_exec(ex, have_pt_gnu_stack)	(!(have_pt_gnu_stack))
-
-/* Ugly but avoids duplication */
-#include "../../../fs/binfmt_elf.c"
-
-extern struct page *ia32_shared_page[];
-extern unsigned long *ia32_gdt;
-extern struct page *ia32_gate_page;
-
-int
-ia32_install_shared_page (struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	vmf->page = ia32_shared_page[smp_processor_id()];
-	get_page(vmf->page);
-	return 0;
-}
-
-int
-ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf)
-{
-	vmf->page = ia32_gate_page;
-	get_page(vmf->page);
-	return 0;
-}
-
-
-static const struct vm_operations_struct ia32_shared_page_vm_ops = {
-	.fault = ia32_install_shared_page
-};
-
-static const struct vm_operations_struct ia32_gate_page_vm_ops = {
-	.fault = ia32_install_gate_page
-};
-
-void
-ia64_elf32_init (struct pt_regs *regs)
-{
-	struct vm_area_struct *vma;
-
-	/*
-	 * Map GDT below 4GB, where the processor can find it.  We need to map
-	 * it with privilege level 3 because the IVE uses non-privileged accesses to these
-	 * tables.  IA-32 segmentation is used to protect against IA-32 accesses to them.
-	 */
-	vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
-	if (vma) {
-		vma->vm_mm = current->mm;
-		vma->vm_start = IA32_GDT_OFFSET;
-		vma->vm_end = vma->vm_start + PAGE_SIZE;
-		vma->vm_page_prot = PAGE_SHARED;
-		vma->vm_flags = VM_READ|VM_MAYREAD|VM_RESERVED;
-		vma->vm_ops = &ia32_shared_page_vm_ops;
-		down_write(&current->mm->mmap_sem);
-		{
-			if (insert_vm_struct(current->mm, vma)) {
-				kmem_cache_free(vm_area_cachep, vma);
-				up_write(&current->mm->mmap_sem);
-				BUG();
-			}
-		}
-		up_write(&current->mm->mmap_sem);
-	}
-
-	/*
-	 * When user stack is not executable, push sigreturn code to stack makes
-	 * segmentation fault raised when returning to kernel. So now sigreturn
-	 * code is locked in specific gate page, which is pointed by pretcode
-	 * when setup_frame_ia32
-	 */
-	vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
-	if (vma) {
-		vma->vm_mm = current->mm;
-		vma->vm_start = IA32_GATE_OFFSET;
-		vma->vm_end = vma->vm_start + PAGE_SIZE;
-		vma->vm_page_prot = PAGE_COPY_EXEC;
-		vma->vm_flags = VM_READ | VM_MAYREAD | VM_EXEC
-				| VM_MAYEXEC | VM_RESERVED;
-		vma->vm_ops = &ia32_gate_page_vm_ops;
-		down_write(&current->mm->mmap_sem);
-		{
-			if (insert_vm_struct(current->mm, vma)) {
-				kmem_cache_free(vm_area_cachep, vma);
-				up_write(&current->mm->mmap_sem);
-				BUG();
-			}
-		}
-		up_write(&current->mm->mmap_sem);
-	}
-
-	/*
-	 * Install LDT as anonymous memory.  This gives us all-zero segment descriptors
-	 * until a task modifies them via modify_ldt().
-	 */
-	vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
-	if (vma) {
-		vma->vm_mm = current->mm;
-		vma->vm_start = IA32_LDT_OFFSET;
-		vma->vm_end = vma->vm_start + PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
-		vma->vm_page_prot = PAGE_SHARED;
-		vma->vm_flags = VM_READ|VM_WRITE|VM_MAYREAD|VM_MAYWRITE;
-		down_write(&current->mm->mmap_sem);
-		{
-			if (insert_vm_struct(current->mm, vma)) {
-				kmem_cache_free(vm_area_cachep, vma);
-				up_write(&current->mm->mmap_sem);
-				BUG();
-			}
-		}
-		up_write(&current->mm->mmap_sem);
-	}
-
-	ia64_psr(regs)->ac = 0;		/* turn off alignment checking */
-	regs->loadrs = 0;
-	/*
-	 *  According to the ABI %edx points to an `atexit' handler.  Since we don't have
-	 *  one we'll set it to 0 and initialize all the other registers just to make
-	 *  things more deterministic, ala the i386 implementation.
-	 */
-	regs->r8 = 0;	/* %eax */
-	regs->r11 = 0;	/* %ebx */
-	regs->r9 = 0;	/* %ecx */
-	regs->r10 = 0;	/* %edx */
-	regs->r13 = 0;	/* %ebp */
-	regs->r14 = 0;	/* %esi */
-	regs->r15 = 0;	/* %edi */
-
-	current->thread.eflag = IA32_EFLAG;
-	current->thread.fsr = IA32_FSR_DEFAULT;
-	current->thread.fcr = IA32_FCR_DEFAULT;
-	current->thread.fir = 0;
-	current->thread.fdr = 0;
-
-	/*
-	 * Setup GDTD.  Note: GDTD is the descrambled version of the pseudo-descriptor
-	 * format defined by Figure 3-11 "Pseudo-Descriptor Format" in the IA-32
-	 * architecture manual. Also note that the only fields that are not ignored are
-	 * `base', `limit', 'G', `P' (must be 1) and `S' (must be 0).
-	 */
-	regs->r31 = IA32_SEG_UNSCRAMBLE(IA32_SEG_DESCRIPTOR(IA32_GDT_OFFSET, IA32_PAGE_SIZE - 1,
-							    0, 0, 0, 1, 0, 0, 0));
-	/* Setup the segment selectors */
-	regs->r16 = (__USER_DS << 16) | __USER_DS; /* ES == DS, GS, FS are zero */
-	regs->r17 = (__USER_DS << 16) | __USER_CS; /* SS, CS; ia32_load_state() sets TSS and LDT */
-
-	ia32_load_segment_descriptors(current);
-	ia32_load_state(current);
-}
-
-/*
- * Undo the override of setup_arg_pages() without this ia32_setup_arg_pages()
- * will suffer infinite self recursion.
- */
-#undef setup_arg_pages
-
-int
-ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack)
-{
-	int ret;
-
-	ret = setup_arg_pages(bprm, IA32_STACK_TOP, executable_stack);
-	if (!ret) {
-		/*
-		 * Can't do it in ia64_elf32_init(). Needs to be done before
-		 * calls to elf32_map()
-		 */
-		current->thread.ppl = ia32_init_pp_list();
-	}
-
-	return ret;
-}
-
-static void
-elf32_set_personality (void)
-{
-	set_personality(PER_LINUX32);
-	current->thread.map_base  = IA32_PAGE_OFFSET/3;
-}
-
-static unsigned long
-elf32_map(struct file *filep, unsigned long addr, struct elf_phdr *eppnt,
-		int prot, int type, unsigned long unused)
-{
-	unsigned long pgoff = (eppnt->p_vaddr) & ~IA32_PAGE_MASK;
-
-	return ia32_do_mmap(filep, (addr & IA32_PAGE_MASK), eppnt->p_filesz + pgoff, prot, type,
-			    eppnt->p_offset - pgoff);
-}
-
-#define cpu_uses_ia32el()	(local_cpu_data->family > 0x1f)
-
-static int __init check_elf32_binfmt(void)
-{
-	if (cpu_uses_ia32el()) {
-		printk("Please use IA-32 EL for executing IA-32 binaries\n");
-		unregister_binfmt(&elf_format);
-	}
-	return 0;
-}
-
-module_init(check_elf32_binfmt)
diff --git a/arch/ia64/ia32/elfcore32.h b/arch/ia64/ia32/elfcore32.h
deleted file mode 100644
index 6577257..0000000
--- a/arch/ia64/ia32/elfcore32.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * IA-32 ELF core dump support.
- *
- * Copyright (C) 2003 Arun Sharma <arun.sharma@intel.com>
- *
- * Derived from the x86_64 version
- */
-#ifndef _ELFCORE32_H_
-#define _ELFCORE32_H_
-
-#include <asm/intrinsics.h>
-#include <asm/uaccess.h>
-
-/* Override elfcore.h */
-#define _LINUX_ELFCORE_H 1
-typedef unsigned int elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct32) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct ia32_user_i387_struct elf_fpregset_t;
-typedef struct ia32_user_fxsr_struct elf_fpxregset_t;
-
-struct elf_siginfo
-{
-	int	si_signo;			/* signal number */
-	int	si_code;			/* extra code */
-	int	si_errno;			/* errno */
-};
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-/*
- * Hacks are here since types between compat_timeval (= pair of s32) and
- * ia64-native timeval (= pair of s64) are not compatible, at least a file
- * arch/ia64/ia32/../../../fs/binfmt_elf.c will get warnings from compiler on
- * use of cputime_to_timeval(), which usually an alias of jiffies_to_timeval().
- */
-#define cputime_to_timeval(a,b) \
-	do { (b)->tv_usec = 0; (b)->tv_sec = (a)/NSEC_PER_SEC; } while(0)
-#else
-#define jiffies_to_timeval(a,b) \
-	do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; } while(0)
-#endif
-
-struct elf_prstatus
-{
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	unsigned int pr_sigpend;	/* Set of pending signals */
-	unsigned int pr_sighold;	/* Set of held signals */
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct compat_timeval pr_utime;	/* User time */
-	struct compat_timeval pr_stime;	/* System time */
-	struct compat_timeval pr_cutime;	/* Cumulative user time */
-	struct compat_timeval pr_cstime;	/* Cumulative system time */
-	elf_gregset_t pr_reg;	/* GP registers */
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define ELF_PRARGSZ	(80)	/* Number of chars for args */
-
-struct elf_prpsinfo
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	unsigned int pr_flag;	/* flags */
-	__u16	pr_uid;
-	__u16	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs)       		\
-	pr_reg[0] = regs->r11;				\
-	pr_reg[1] = regs->r9;				\
-	pr_reg[2] = regs->r10;				\
-	pr_reg[3] = regs->r14;				\
-	pr_reg[4] = regs->r15;				\
-	pr_reg[5] = regs->r13;				\
-	pr_reg[6] = regs->r8;				\
-	pr_reg[7] = regs->r16 & 0xffff;			\
-	pr_reg[8] = (regs->r16 >> 16) & 0xffff;		\
-	pr_reg[9] = (regs->r16 >> 32) & 0xffff;		\
-	pr_reg[10] = (regs->r16 >> 48) & 0xffff;	\
-	pr_reg[11] = regs->r1; 				\
-	pr_reg[12] = regs->cr_iip;			\
-	pr_reg[13] = regs->r17 & 0xffff;		\
-	pr_reg[14] = ia64_getreg(_IA64_REG_AR_EFLAG);	\
-	pr_reg[15] = regs->r12;				\
-	pr_reg[16] = (regs->r17 >> 16) & 0xffff;
-
-static inline void elf_core_copy_regs(elf_gregset_t *elfregs,
-				      struct pt_regs *regs)
-{
-	ELF_CORE_COPY_REGS((*elfregs), regs)
-}
-
-static inline int elf_core_copy_task_regs(struct task_struct *t,
-					  elf_gregset_t* elfregs)
-{
-	ELF_CORE_COPY_REGS((*elfregs), task_pt_regs(t));
-	return 1;
-}
-
-static inline int
-elf_core_copy_task_fpregs(struct task_struct *tsk, struct pt_regs *regs, elf_fpregset_t *fpu)
-{
-	struct ia32_user_i387_struct *fpstate = (void*)fpu;
-	mm_segment_t old_fs;
-
-	if (!tsk_used_math(tsk))
-		return 0;
-	
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	save_ia32_fpstate(tsk, (struct ia32_user_i387_struct __user *) fpstate);
-	set_fs(old_fs);
-
-	return 1;
-}
-
-#define ELF_CORE_COPY_XFPREGS 1
-#define ELF_CORE_XFPREG_TYPE NT_PRXFPREG
-static inline int
-elf_core_copy_task_xfpregs(struct task_struct *tsk, elf_fpxregset_t *xfpu)
-{
-	struct ia32_user_fxsr_struct *fpxstate = (void*) xfpu;
-	mm_segment_t old_fs;
-
-	if (!tsk_used_math(tsk))
-		return 0;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	save_ia32_fpxstate(tsk, (struct ia32_user_fxsr_struct __user *) fpxstate);
-	set_fs(old_fs);
-
-	return 1;
-}
-
-#endif /* _ELFCORE32_H_ */
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
deleted file mode 100644
index 2fd7479..0000000
--- a/arch/ia64/ia32/ia32_entry.S
+++ /dev/null
@@ -1,468 +0,0 @@
-#include <asm/asmmacro.h>
-#include <asm/ia32.h>
-#include <asm/asm-offsets.h>
-#include <asm/signal.h>
-#include <asm/thread_info.h>
-
-#include "../kernel/minstate.h"
-
-	/*
-	 * execve() is special because in case of success, we need to
-	 * setup a null register window frame (in case an IA-32 process
-	 * is exec'ing an IA-64 program).
-	 */
-ENTRY(ia32_execve)
-	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(3)
-	alloc loc1=ar.pfs,3,2,4,0
-	mov loc0=rp
-	.body
-	zxt4 out0=in0			// filename
-	;;				// stop bit between alloc and call
-	zxt4 out1=in1			// argv
-	zxt4 out2=in2			// envp
-	add out3=16,sp			// regs
-	br.call.sptk.few rp=sys32_execve
-1:	cmp.ge p6,p0=r8,r0
-	mov ar.pfs=loc1			// restore ar.pfs
-	;;
-(p6)	mov ar.pfs=r0			// clear ar.pfs in case of success
-	sxt4 r8=r8			// return 64-bit result
-	mov rp=loc0
-	br.ret.sptk.few rp
-END(ia32_execve)
-
-ENTRY(ia32_clone)
-	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5)
-	alloc r16=ar.pfs,5,2,6,0
-	DO_SAVE_SWITCH_STACK
-	mov loc0=rp
-	mov loc1=r16				// save ar.pfs across do_fork
-	.body
-	zxt4 out1=in1				// newsp
-	mov out3=16				// stacksize (compensates for 16-byte scratch area)
-	adds out2=IA64_SWITCH_STACK_SIZE+16,sp	// out2 = &regs
-	mov out0=in0				// out0 = clone_flags
-	zxt4 out4=in2				// out4 = parent_tidptr
-	zxt4 out5=in4				// out5 = child_tidptr
-	br.call.sptk.many rp=do_fork
-.ret0:	.restore sp
-	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
-	mov ar.pfs=loc1
-	mov rp=loc0
-	br.ret.sptk.many rp
-END(ia32_clone)
-
-GLOBAL_ENTRY(ia32_ret_from_clone)
-	PT_REGS_UNWIND_INFO(0)
-{	/*
-	 * Some versions of gas generate bad unwind info if the first instruction of a
-	 * procedure doesn't go into the first slot of a bundle.  This is a workaround.
-	 */
-	nop.m 0
-	nop.i 0
-	/*
-	 * We need to call schedule_tail() to complete the scheduling process.
-	 * Called by ia64_switch_to after do_fork()->copy_thread().  r8 contains the
-	 * address of the previously executing task.
-	 */
-	br.call.sptk.many rp=ia64_invoke_schedule_tail
-}
-.ret1:
-	adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
-	;;
-	ld4 r2=[r2]
-	;;
-	mov r8=0
-	and r2=_TIF_SYSCALL_TRACEAUDIT,r2
-	;;
-	cmp.ne p6,p0=r2,r0
-(p6)	br.cond.spnt .ia32_strace_check_retval
-	;;					// prevent RAW on r8
-END(ia32_ret_from_clone)
-	// fall through
-GLOBAL_ENTRY(ia32_ret_from_syscall)
-	PT_REGS_UNWIND_INFO(0)
-
-	cmp.ge p6,p7=r8,r0                      // syscall executed successfully?
-	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp    // r2 = &pt_regs.r8
-	;;
-	alloc r3=ar.pfs,0,0,0,0			// drop the syscall argument frame
-	st8 [r2]=r8                             // store return value in slot for r8
-	br.cond.sptk.many ia64_leave_kernel
-END(ia32_ret_from_syscall)
-
-	//
-	// Invoke a system call, but do some tracing before and after the call.
-	// We MUST preserve the current register frame throughout this routine
-	// because some system calls (such as ia64_execve) directly
-	// manipulate ar.pfs.
-	//
-	// Input:
-	//	r8 = syscall number
-	//	b6 = syscall entry point
-	//
-GLOBAL_ENTRY(ia32_trace_syscall)
-	PT_REGS_UNWIND_INFO(0)
-	mov r3=-38
-	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp
-	;;
-	st8 [r2]=r3				// initialize return code to -ENOSYS
-	br.call.sptk.few rp=syscall_trace_enter	// give parent a chance to catch syscall args
-	cmp.lt p6,p0=r8,r0			// check tracehook
-	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp	// r2 = &pt_regs.r8
-	;;
-(p6)	st8.spill [r2]=r8			// store return value in slot for r8
-(p6)	br.spnt.few .ret4
-.ret2:	// Need to reload arguments (they may be changed by the tracing process)
-	adds r2=IA64_PT_REGS_R1_OFFSET+16,sp	// r2 = &pt_regs.r1
-	adds r3=IA64_PT_REGS_R13_OFFSET+16,sp	// r3 = &pt_regs.r13
-	mov r15=IA32_NR_syscalls
-	;;
-	ld4 r8=[r2],IA64_PT_REGS_R9_OFFSET-IA64_PT_REGS_R1_OFFSET
-	movl r16=ia32_syscall_table
-	;;
-	ld4 r33=[r2],8				// r9 == ecx
-	ld4 r37=[r3],16				// r13 == ebp
-	cmp.ltu.unc p6,p7=r8,r15
-	;;
-	ld4 r34=[r2],8				// r10 == edx
-	ld4 r36=[r3],8				// r15 == edi
-(p6)	shladd r16=r8,3,r16	// force ni_syscall if not valid syscall number
-	;;
-	ld8 r16=[r16]
-	;;
-	ld4 r32=[r2],8				// r11 == ebx
-	mov b6=r16
-	ld4 r35=[r3],8				// r14 == esi
-	br.call.sptk.few rp=b6			// do the syscall
-.ia32_strace_check_retval:
-	cmp.lt p6,p0=r8,r0			// syscall failed?
-	adds r2=IA64_PT_REGS_R8_OFFSET+16,sp	// r2 = &pt_regs.r8
-	;;
-	st8.spill [r2]=r8			// store return value in slot for r8
-	br.call.sptk.few rp=syscall_trace_leave	// give parent a chance to catch return value
-.ret4:	alloc r2=ar.pfs,0,0,0,0			// drop the syscall argument frame
-	br.cond.sptk.many ia64_leave_kernel
-END(ia32_trace_syscall)
-
-GLOBAL_ENTRY(sys32_vfork)
-	alloc r16=ar.pfs,2,2,4,0;;
-	mov out0=IA64_CLONE_VFORK|IA64_CLONE_VM|SIGCHLD	// out0 = clone_flags
-	br.cond.sptk.few .fork1			// do the work
-END(sys32_vfork)
-
-GLOBAL_ENTRY(sys32_fork)
-	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
-	alloc r16=ar.pfs,2,2,4,0
-	mov out0=SIGCHLD			// out0 = clone_flags
-	;;
-.fork1:
-	mov loc0=rp
-	mov loc1=r16				// save ar.pfs across do_fork
-	DO_SAVE_SWITCH_STACK
-
-	.body
-
-	mov out1=0
-	mov out3=0
-	adds out2=IA64_SWITCH_STACK_SIZE+16,sp	// out2 = &regs
-	br.call.sptk.few rp=do_fork
-.ret5:	.restore sp
-	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
-	mov ar.pfs=loc1
-	mov rp=loc0
-	br.ret.sptk.many rp
-END(sys32_fork)
-
-	.rodata
-	.align 8
-	.globl ia32_syscall_table
-ia32_syscall_table:
-	data8 sys_ni_syscall	  /* 0	-  old "setup(" system call*/
-	data8 sys_exit
-	data8 sys32_fork
-	data8 sys_read
-	data8 sys_write
-	data8 compat_sys_open	  /* 5 */
-	data8 sys_close
-	data8 sys32_waitpid
-	data8 sys_creat
-	data8 sys_link
-	data8 sys_unlink	  /* 10 */
-	data8 ia32_execve
-	data8 sys_chdir
-	data8 compat_sys_time
-	data8 sys_mknod
-	data8 sys_chmod		  /* 15 */
-	data8 sys_lchown	/* 16-bit version */
-	data8 sys_ni_syscall	  /* old break syscall holder */
-	data8 sys_ni_syscall
-	data8 sys32_lseek
-	data8 sys_getpid	  /* 20 */
-	data8 compat_sys_mount
-	data8 sys_oldumount
-	data8 sys_setuid	/* 16-bit version */
-	data8 sys_getuid	/* 16-bit version */
-	data8 compat_sys_stime    /* 25 */
-	data8 compat_sys_ptrace
-	data8 sys32_alarm
-	data8 sys_ni_syscall
-	data8 sys_pause
-	data8 compat_sys_utime	  /* 30 */
-	data8 sys_ni_syscall	  /* old stty syscall holder */
-	data8 sys_ni_syscall	  /* old gtty syscall holder */
-	data8 sys_access
-	data8 sys_nice
-	data8 sys_ni_syscall	  /* 35 */	  /* old ftime syscall holder */
-	data8 sys_sync
-	data8 sys_kill
-	data8 sys_rename
-	data8 sys_mkdir
-	data8 sys_rmdir		  /* 40 */
-	data8 sys_dup
-	data8 sys_ia64_pipe
-	data8 compat_sys_times
-	data8 sys_ni_syscall	  /* old prof syscall holder */
-	data8 sys32_brk		  /* 45 */
-	data8 sys_setgid	/* 16-bit version */
-	data8 sys_getgid	/* 16-bit version */
-	data8 sys32_signal
-	data8 sys_geteuid	/* 16-bit version */
-	data8 sys_getegid	/* 16-bit version */	  /* 50 */
-	data8 sys_acct
-	data8 sys_umount	  /* recycled never used phys( */
-	data8 sys_ni_syscall	  /* old lock syscall holder */
-	data8 compat_sys_ioctl
-	data8 compat_sys_fcntl	  /* 55 */
-	data8 sys_ni_syscall	  /* old mpx syscall holder */
-	data8 sys_setpgid
-	data8 sys_ni_syscall	  /* old ulimit syscall holder */
-	data8 sys_ni_syscall
-	data8 sys_umask		  /* 60 */
-	data8 sys_chroot
-	data8 compat_sys_ustat
-	data8 sys_dup2
-	data8 sys_getppid
-	data8 sys_getpgrp	  /* 65 */
-	data8 sys_setsid
-	data8 sys32_sigaction
-	data8 sys_ni_syscall
-	data8 sys_ni_syscall
-	data8 sys_setreuid	/* 16-bit version */	  /* 70 */
-	data8 sys_setregid	/* 16-bit version */
-	data8 sys32_sigsuspend
-	data8 compat_sys_sigpending
-	data8 sys_sethostname
-	data8 compat_sys_setrlimit	  /* 75 */
-	data8 compat_sys_old_getrlimit
-	data8 compat_sys_getrusage
-	data8 compat_sys_gettimeofday
-	data8 compat_sys_settimeofday
-	data8 sys32_getgroups16	  /* 80 */
-	data8 sys32_setgroups16
-	data8 sys32_old_select
-	data8 sys_symlink
-	data8 sys_ni_syscall
-	data8 sys_readlink	  /* 85 */
-	data8 sys_uselib
-	data8 sys_swapon
-	data8 sys_reboot
-	data8 compat_sys_old_readdir
-	data8 sys32_mmap	  /* 90 */
-	data8 sys32_munmap
-	data8 sys_truncate
-	data8 sys_ftruncate
-	data8 sys_fchmod
-	data8 sys_fchown	/* 16-bit version */	  /* 95 */
-	data8 sys_getpriority
-	data8 sys_setpriority
-	data8 sys_ni_syscall	  /* old profil syscall holder */
-	data8 compat_sys_statfs
-	data8 compat_sys_fstatfs	  /* 100 */
-	data8 sys_ni_syscall	/* ioperm */
-	data8 compat_sys_socketcall
-	data8 sys_syslog
-	data8 compat_sys_setitimer
-	data8 compat_sys_getitimer	  /* 105 */
-	data8 compat_sys_newstat
-	data8 compat_sys_newlstat
-	data8 compat_sys_newfstat
-	data8 sys_ni_syscall
-	data8 sys_ni_syscall	/* iopl */	/* 110 */
-	data8 sys_vhangup
-	data8 sys_ni_syscall		/* used to be sys_idle */
-	data8 sys_ni_syscall
-	data8 compat_sys_wait4
-	data8 sys_swapoff	  /* 115 */
-	data8 compat_sys_sysinfo
-	data8 sys32_ipc
-	data8 sys_fsync
-	data8 sys32_sigreturn
-	data8 ia32_clone	  /* 120 */
-	data8 sys_setdomainname
-	data8 sys32_newuname
-	data8 sys32_modify_ldt
-	data8 compat_sys_adjtimex
-	data8 sys32_mprotect	  /* 125 */
-	data8 compat_sys_sigprocmask
-	data8 sys_ni_syscall	/* create_module */
-	data8 sys_ni_syscall	/* init_module */
-	data8 sys_ni_syscall	/* delete_module */
-	data8 sys_ni_syscall	/* get_kernel_syms */  /* 130 */
-	data8 sys32_quotactl
-	data8 sys_getpgid
-	data8 sys_fchdir
-	data8 sys_ni_syscall	/* sys_bdflush */
-	data8 sys_sysfs		/* 135 */
-	data8 sys32_personality
-	data8 sys_ni_syscall	  /* for afs_syscall */
-	data8 sys_setfsuid	/* 16-bit version */
-	data8 sys_setfsgid	/* 16-bit version */
-	data8 sys_llseek	  /* 140 */
-	data8 compat_sys_getdents
-	data8 compat_sys_select
-	data8 sys_flock
-	data8 sys32_msync
-	data8 compat_sys_readv	  /* 145 */
-	data8 compat_sys_writev
-	data8 sys_getsid
-	data8 sys_fdatasync
-	data8 compat_sys_sysctl
-	data8 sys_mlock		  /* 150 */
-	data8 sys_munlock
-	data8 sys_mlockall
-	data8 sys_munlockall
-	data8 sys_sched_setparam
-	data8 sys_sched_getparam  /* 155 */
-	data8 sys_sched_setscheduler
-	data8 sys_sched_getscheduler
-	data8 sys_sched_yield
-	data8 sys_sched_get_priority_max
-	data8 sys_sched_get_priority_min	 /* 160 */
-	data8 sys32_sched_rr_get_interval
-	data8 compat_sys_nanosleep
-	data8 sys32_mremap
-	data8 sys_setresuid	/* 16-bit version */
-	data8 sys32_getresuid16	/* 16-bit version */	  /* 165 */
-	data8 sys_ni_syscall	/* vm86 */
-	data8 sys_ni_syscall	/* sys_query_module */
-	data8 sys_poll
-	data8 sys_ni_syscall	/* nfsservctl */
-	data8 sys_setresgid	  /* 170 */
-	data8 sys32_getresgid16
-	data8 sys_prctl
-	data8 sys32_rt_sigreturn
-	data8 sys32_rt_sigaction
-	data8 sys32_rt_sigprocmask /* 175 */
-	data8 sys_rt_sigpending
-	data8 compat_sys_rt_sigtimedwait
-	data8 sys32_rt_sigqueueinfo
-	data8 compat_sys_rt_sigsuspend
-	data8 sys32_pread	  /* 180 */
-	data8 sys32_pwrite
-	data8 sys_chown	/* 16-bit version */
-	data8 sys_getcwd
-	data8 sys_capget
-	data8 sys_capset	  /* 185 */
-	data8 sys32_sigaltstack
-	data8 sys32_sendfile
-	data8 sys_ni_syscall		  /* streams1 */
-	data8 sys_ni_syscall		  /* streams2 */
-	data8 sys32_vfork	  /* 190 */
-	data8 compat_sys_getrlimit
-	data8 sys32_mmap2
-	data8 sys32_truncate64
-	data8 sys32_ftruncate64
-	data8 sys32_stat64	  /* 195 */
-	data8 sys32_lstat64
-	data8 sys32_fstat64
-	data8 sys_lchown
-	data8 sys_getuid
-	data8 sys_getgid	  /* 200 */
-	data8 sys_geteuid
-	data8 sys_getegid
-	data8 sys_setreuid
-	data8 sys_setregid
-	data8 sys_getgroups	  /* 205 */
-	data8 sys_setgroups
-	data8 sys_fchown
-	data8 sys_setresuid
-	data8 sys_getresuid
-	data8 sys_setresgid	  /* 210 */
-	data8 sys_getresgid
-	data8 sys_chown
-	data8 sys_setuid
-	data8 sys_setgid
-	data8 sys_setfsuid	  /* 215 */
-	data8 sys_setfsgid
-	data8 sys_pivot_root
-	data8 sys_mincore
-	data8 sys_madvise
-	data8 compat_sys_getdents64	  /* 220 */
-	data8 compat_sys_fcntl64
-	data8 sys_ni_syscall		/* reserved for TUX */
-	data8 sys_ni_syscall		/* reserved for Security */
-	data8 sys_gettid
-	data8 sys_readahead	  /* 225 */
- 	data8 sys_setxattr
- 	data8 sys_lsetxattr
- 	data8 sys_fsetxattr
- 	data8 sys_getxattr
- 	data8 sys_lgetxattr	/* 230 */
- 	data8 sys_fgetxattr
- 	data8 sys_listxattr
- 	data8 sys_llistxattr
- 	data8 sys_flistxattr
- 	data8 sys_removexattr	/* 235 */
- 	data8 sys_lremovexattr
- 	data8 sys_fremovexattr
-	data8 sys_tkill
- 	data8 sys_sendfile64
-	data8 compat_sys_futex	/* 240 */
-	data8 compat_sys_sched_setaffinity
-	data8 compat_sys_sched_getaffinity
-	data8 sys32_set_thread_area
-	data8 sys32_get_thread_area
- 	data8 compat_sys_io_setup	/* 245 */
- 	data8 sys_io_destroy
- 	data8 compat_sys_io_getevents
- 	data8 compat_sys_io_submit
- 	data8 sys_io_cancel
- 	data8 sys_fadvise64	/* 250 */
-	data8 sys_ni_syscall
-	data8 sys_exit_group
- 	data8 sys_lookup_dcookie
-	data8 sys_epoll_create
-	data8 sys32_epoll_ctl	/* 255 */
-	data8 sys32_epoll_wait
-	data8 sys_remap_file_pages
-	data8 sys_set_tid_address
- 	data8 compat_sys_timer_create
- 	data8 compat_sys_timer_settime	/* 260 */
- 	data8 compat_sys_timer_gettime
- 	data8 sys_timer_getoverrun
- 	data8 sys_timer_delete
- 	data8 compat_sys_clock_settime
- 	data8 compat_sys_clock_gettime /* 265 */
- 	data8 compat_sys_clock_getres
- 	data8 compat_sys_clock_nanosleep
-	data8 compat_sys_statfs64
-	data8 compat_sys_fstatfs64
- 	data8 sys_tgkill	/* 270 */
- 	data8 compat_sys_utimes
- 	data8 sys32_fadvise64_64
- 	data8 sys_ni_syscall
-  	data8 sys_ni_syscall
- 	data8 sys_ni_syscall	/* 275 */
-  	data8 sys_ni_syscall
-  	data8 compat_sys_mq_open
-  	data8 sys_mq_unlink
-  	data8 compat_sys_mq_timedsend
-  	data8 compat_sys_mq_timedreceive	/* 280 */
-  	data8 compat_sys_mq_notify
-  	data8 compat_sys_mq_getsetattr
-	data8 sys_ni_syscall		/* reserved for kexec */
-	data8 compat_sys_waitid
-
-	// guard against failures to increase IA32_NR_syscalls
-	.org ia32_syscall_table + 8*IA32_NR_syscalls
diff --git a/arch/ia64/ia32/ia32_ldt.c b/arch/ia64/ia32/ia32_ldt.c
deleted file mode 100644
index 16d51c1..0000000
--- a/arch/ia64/ia32/ia32_ldt.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2001, 2004 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * Adapted from arch/i386/kernel/ldt.c
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/vmalloc.h>
-
-#include <asm/uaccess.h>
-
-#include "ia32priv.h"
-
-/*
- * read_ldt() is not really atomic - this is not a problem since synchronization of reads
- * and writes done to the LDT has to be assured by user-space anyway. Writes are atomic,
- * to protect the security checks done on new descriptors.
- */
-static int
-read_ldt (void __user *ptr, unsigned long bytecount)
-{
-	unsigned long bytes_left, n;
-	char __user *src, *dst;
-	char buf[256];	/* temporary buffer (don't overflow kernel stack!) */
-
-	if (bytecount > IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE)
-		bytecount = IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE;
-
-	bytes_left = bytecount;
-
-	src = (void __user *) IA32_LDT_OFFSET;
-	dst = ptr;
-
-	while (bytes_left) {
-		n = sizeof(buf);
-		if (n > bytes_left)
-			n = bytes_left;
-
-		/*
-		 * We know we're reading valid memory, but we still must guard against
-		 * running out of memory.
-		 */
-		if (__copy_from_user(buf, src, n))
-			return -EFAULT;
-
-		if (copy_to_user(dst, buf, n))
-			return -EFAULT;
-
-		src += n;
-		dst += n;
-		bytes_left -= n;
-	}
-	return bytecount;
-}
-
-static int
-read_default_ldt (void __user * ptr, unsigned long bytecount)
-{
-	unsigned long size;
-	int err;
-
-	/* XXX fix me: should return equivalent of default_ldt[0] */
-	err = 0;
-	size = 8;
-	if (size > bytecount)
-		size = bytecount;
-
-	err = size;
-	if (clear_user(ptr, size))
-		err = -EFAULT;
-
-	return err;
-}
-
-static int
-write_ldt (void __user * ptr, unsigned long bytecount, int oldmode)
-{
-	struct ia32_user_desc ldt_info;
-	__u64 entry;
-	int ret;
-
-	if (bytecount != sizeof(ldt_info))
-		return -EINVAL;
-	if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
-		return -EFAULT;
-
-	if (ldt_info.entry_number >= IA32_LDT_ENTRIES)
-		return -EINVAL;
-	if (ldt_info.contents == 3) {
-		if (oldmode)
-			return -EINVAL;
-		if (ldt_info.seg_not_present == 0)
-			return -EINVAL;
-	}
-
-	if (ldt_info.base_addr == 0 && ldt_info.limit == 0
-	    && (oldmode || (ldt_info.contents == 0 && ldt_info.read_exec_only == 1
-			    && ldt_info.seg_32bit == 0 && ldt_info.limit_in_pages == 0
-			    && ldt_info.seg_not_present == 1 && ldt_info.useable == 0)))
-		/* allow LDTs to be cleared by the user */
-		entry = 0;
-	else
-		/* we must set the "Accessed" bit as IVE doesn't emulate it */
-		entry = IA32_SEG_DESCRIPTOR(ldt_info.base_addr, ldt_info.limit,
-					    (((ldt_info.read_exec_only ^ 1) << 1)
-					     | (ldt_info.contents << 2)) | 1,
-					    1, 3, ldt_info.seg_not_present ^ 1,
-					    (oldmode ? 0 : ldt_info.useable),
-					    ldt_info.seg_32bit,
-					    ldt_info.limit_in_pages);
-	/*
-	 * Install the new entry.  We know we're accessing valid (mapped) user-level
-	 * memory, but we still need to guard against out-of-memory, hence we must use
-	 * put_user().
-	 */
-	ret = __put_user(entry, (__u64 __user *) IA32_LDT_OFFSET + ldt_info.entry_number);
-	ia32_load_segment_descriptors(current);
-	return ret;
-}
-
-asmlinkage int
-sys32_modify_ldt (int func, unsigned int ptr, unsigned int bytecount)
-{
-	int ret = -ENOSYS;
-
-	switch (func) {
-	      case 0:
-		ret = read_ldt(compat_ptr(ptr), bytecount);
-		break;
-	      case 1:
-		ret = write_ldt(compat_ptr(ptr), bytecount, 1);
-		break;
-	      case 2:
-		ret = read_default_ldt(compat_ptr(ptr), bytecount);
-		break;
-	      case 0x11:
-		ret = write_ldt(compat_ptr(ptr), bytecount, 0);
-		break;
-	}
-	return ret;
-}
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
deleted file mode 100644
index b763ca1..0000000
--- a/arch/ia64/ia32/ia32_signal.c
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * IA32 Architecture-specific signal handling support.
- *
- * Copyright (C) 1999, 2001-2002, 2005 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2000 VA Linux Co
- * Copyright (C) 2000 Don Dugger <n0ano@valinux.com>
- *
- * Derived from i386 and Alpha versions.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/syscalls.h>
-#include <linux/unistd.h>
-#include <linux/wait.h>
-#include <linux/compat.h>
-
-#include <asm/intrinsics.h>
-#include <asm/uaccess.h>
-#include <asm/rse.h>
-#include <asm/sigcontext.h>
-
-#include "ia32priv.h"
-
-#include "../kernel/sigframe.h"
-
-#define A(__x)		((unsigned long)(__x))
-
-#define DEBUG_SIG	0
-#define _BLOCKABLE	(~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-#define __IA32_NR_sigreturn            119
-#define __IA32_NR_rt_sigreturn         173
-
-struct sigframe_ia32
-{
-       int pretcode;
-       int sig;
-       struct sigcontext_ia32 sc;
-       struct _fpstate_ia32 fpstate;
-       unsigned int extramask[_COMPAT_NSIG_WORDS-1];
-       char retcode[8];
-};
-
-struct rt_sigframe_ia32
-{
-       int pretcode;
-       int sig;
-       int pinfo;
-       int puc;
-       compat_siginfo_t info;
-       struct ucontext_ia32 uc;
-       struct _fpstate_ia32 fpstate;
-       char retcode[8];
-};
-
-int
-copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
-{
-	unsigned long tmp;
-	int err;
-
-	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
-		return -EFAULT;
-
-	err = __get_user(to->si_signo, &from->si_signo);
-	err |= __get_user(to->si_errno, &from->si_errno);
-	err |= __get_user(to->si_code, &from->si_code);
-
-	if (to->si_code < 0)
-		err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
-	else {
-		switch (to->si_code >> 16) {
-		      case __SI_CHLD >> 16:
-			err |= __get_user(to->si_utime, &from->si_utime);
-			err |= __get_user(to->si_stime, &from->si_stime);
-			err |= __get_user(to->si_status, &from->si_status);
-		      default:
-			err |= __get_user(to->si_pid, &from->si_pid);
-			err |= __get_user(to->si_uid, &from->si_uid);
-			break;
-		      case __SI_FAULT >> 16:
-			err |= __get_user(tmp, &from->si_addr);
-			to->si_addr = (void __user *) tmp;
-			break;
-		      case __SI_POLL >> 16:
-			err |= __get_user(to->si_band, &from->si_band);
-			err |= __get_user(to->si_fd, &from->si_fd);
-			break;
-		      case __SI_RT >> 16: /* This is not generated by the kernel as of now.  */
-		      case __SI_MESGQ >> 16:
-			err |= __get_user(to->si_pid, &from->si_pid);
-			err |= __get_user(to->si_uid, &from->si_uid);
-			err |= __get_user(to->si_int, &from->si_int);
-			break;
-		}
-	}
-	return err;
-}
-
-int
-copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
-{
-	unsigned int addr;
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
-		return -EFAULT;
-
-	/* If you change siginfo_t structure, please be sure
-	   this code is fixed accordingly.
-	   It should never copy any pad contained in the structure
-	   to avoid security leaks, but must copy the generic
-	   3 ints plus the relevant union member.
-	   This routine must convert siginfo from 64bit to 32bit as well
-	   at the same time.  */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-	if (from->si_code < 0)
-		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
-	else {
-		switch (from->si_code >> 16) {
-		case __SI_CHLD >> 16:
-			err |= __put_user(from->si_utime, &to->si_utime);
-			err |= __put_user(from->si_stime, &to->si_stime);
-			err |= __put_user(from->si_status, &to->si_status);
-		default:
-			err |= __put_user(from->si_pid, &to->si_pid);
-			err |= __put_user(from->si_uid, &to->si_uid);
-			break;
-		case __SI_FAULT >> 16:
-			/* avoid type-checking warnings by copying _pad[0] in lieu of si_addr... */
-			err |= __put_user(from->_sifields._pad[0], &to->si_addr);
-			break;
-		case __SI_POLL >> 16:
-			err |= __put_user(from->si_band, &to->si_band);
-			err |= __put_user(from->si_fd, &to->si_fd);
-			break;
-		case __SI_TIMER >> 16:
-			err |= __put_user(from->si_tid, &to->si_tid);
-			err |= __put_user(from->si_overrun, &to->si_overrun);
-			addr = (unsigned long) from->si_ptr;
-			err |= __put_user(addr, &to->si_ptr);
-			break;
-		case __SI_RT >> 16:	/* Not generated by the kernel as of now.  */
-		case __SI_MESGQ >> 16:
-			err |= __put_user(from->si_uid, &to->si_uid);
-			err |= __put_user(from->si_pid, &to->si_pid);
-			addr = (unsigned long) from->si_ptr;
-			err |= __put_user(addr, &to->si_ptr);
-			break;
-		}
-	}
-	return err;
-}
-
-
-/*
- *  SAVE and RESTORE of ia32 fpstate info, from ia64 current state
- *  Used in exception handler to pass the fpstate to the user, and restore
- *  the fpstate while returning from the exception handler.
- *
- *    fpstate info and their mapping to IA64 regs:
- *    fpstate    REG(BITS)      Attribute    Comments
- *    cw         ar.fcr(0:12)                with bits 7 and 6 not used
- *    sw         ar.fsr(0:15)
- *    tag        ar.fsr(16:31)               with odd numbered bits not used
- *                                           (read returns 0, writes ignored)
- *    ipoff      ar.fir(0:31)
- *    cssel      ar.fir(32:47)
- *    dataoff    ar.fdr(0:31)
- *    datasel    ar.fdr(32:47)
- *
- *    _st[(0+TOS)%8]   f8
- *    _st[(1+TOS)%8]   f9
- *    _st[(2+TOS)%8]   f10
- *    _st[(3+TOS)%8]   f11                   (f8..f11 from ptregs)
- *      : :            :                     (f12..f15 from live reg)
- *      : :            :
- *    _st[(7+TOS)%8]   f15                   TOS=sw.top(bits11:13)
- *
- *    status     Same as sw     RO
- *    magic      0                           as X86_FXSR_MAGIC in ia32
- *    mxcsr      Bits(7:15)=ar.fcr(39:47)
- *               Bits(0:5) =ar.fsr(32:37)    with bit 6 reserved
- *    _xmm[0..7] f16..f31                    (live registers)
- *                                           with _xmm[0]
- *                                             Bit(64:127)=f17(0:63)
- *                                             Bit(0:63)=f16(0:63)
- *    All other fields unused...
- */
-
-static int
-save_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
-{
-	struct task_struct *tsk = current;
-	struct pt_regs *ptp;
-	struct _fpreg_ia32 *fpregp;
-	char buf[32];
-	unsigned long fsr, fcr, fir, fdr;
-	unsigned long new_fsr;
-	unsigned long num128[2];
-	unsigned long mxcsr=0;
-	int fp_tos, fr8_st_map;
-
-	if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
-		return -EFAULT;
-
-	/* Read in fsr, fcr, fir, fdr and copy onto fpstate */
-	fsr = ia64_getreg(_IA64_REG_AR_FSR);
-	fcr = ia64_getreg(_IA64_REG_AR_FCR);
-	fir = ia64_getreg(_IA64_REG_AR_FIR);
-	fdr = ia64_getreg(_IA64_REG_AR_FDR);
-
-	/*
-	 * We need to clear the exception state before calling the signal handler. Clear
-	 * the bits 15, bits 0-7 in fp status word. Similar to the functionality of fnclex
-	 * instruction.
-	 */
-	new_fsr = fsr & ~0x80ff;
-	ia64_setreg(_IA64_REG_AR_FSR, new_fsr);
-
-	__put_user(fcr & 0xffff, &save->cw);
-	__put_user(fsr & 0xffff, &save->sw);
-	__put_user((fsr>>16) & 0xffff, &save->tag);
-	__put_user(fir, &save->ipoff);
-	__put_user((fir>>32) & 0xffff, &save->cssel);
-	__put_user(fdr, &save->dataoff);
-	__put_user((fdr>>32) & 0xffff, &save->datasel);
-	__put_user(fsr & 0xffff, &save->status);
-
-	mxcsr = ((fcr>>32) & 0xff80) | ((fsr>>32) & 0x3f);
-	__put_user(mxcsr & 0xffff, &save->mxcsr);
-	__put_user( 0, &save->magic); //#define X86_FXSR_MAGIC   0x0000
-
-	/*
-	 * save f8..f11  from pt_regs
-	 * save f12..f15 from live register set
-	 */
-	/*
-	 *  Find the location where f8 has to go in fp reg stack.  This depends on
-	 *  TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
-	 *  to.
-	 */
-	fp_tos = (fsr>>11)&0x7;
-	fr8_st_map = (8-fp_tos)&0x7;
-	ptp = task_pt_regs(tsk);
-	fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
-	ia64f2ia32f(fpregp, &ptp->f8);
-	copy_to_user(&save->_st[(0+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64f2ia32f(fpregp, &ptp->f9);
-	copy_to_user(&save->_st[(1+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64f2ia32f(fpregp, &ptp->f10);
-	copy_to_user(&save->_st[(2+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64f2ia32f(fpregp, &ptp->f11);
-	copy_to_user(&save->_st[(3+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-
-	ia64_stfe(fpregp, 12);
-	copy_to_user(&save->_st[(4+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64_stfe(fpregp, 13);
-	copy_to_user(&save->_st[(5+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64_stfe(fpregp, 14);
-	copy_to_user(&save->_st[(6+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-	ia64_stfe(fpregp, 15);
-	copy_to_user(&save->_st[(7+fr8_st_map)&0x7], fpregp, sizeof(struct _fpreg_ia32));
-
-	ia64_stf8(&num128[0], 16);
-	ia64_stf8(&num128[1], 17);
-	copy_to_user(&save->_xmm[0], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 18);
-	ia64_stf8(&num128[1], 19);
-	copy_to_user(&save->_xmm[1], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 20);
-	ia64_stf8(&num128[1], 21);
-	copy_to_user(&save->_xmm[2], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 22);
-	ia64_stf8(&num128[1], 23);
-	copy_to_user(&save->_xmm[3], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 24);
-	ia64_stf8(&num128[1], 25);
-	copy_to_user(&save->_xmm[4], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 26);
-	ia64_stf8(&num128[1], 27);
-	copy_to_user(&save->_xmm[5], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 28);
-	ia64_stf8(&num128[1], 29);
-	copy_to_user(&save->_xmm[6], num128, sizeof(struct _xmmreg_ia32));
-
-	ia64_stf8(&num128[0], 30);
-	ia64_stf8(&num128[1], 31);
-	copy_to_user(&save->_xmm[7], num128, sizeof(struct _xmmreg_ia32));
-	return 0;
-}
-
-static int
-restore_ia32_fpstate_live (struct _fpstate_ia32 __user *save)
-{
-	struct task_struct *tsk = current;
-	struct pt_regs *ptp;
-	unsigned int lo, hi;
-	unsigned long num128[2];
-	unsigned long num64, mxcsr;
-	struct _fpreg_ia32 *fpregp;
-	char buf[32];
-	unsigned long fsr, fcr, fir, fdr;
-	int fp_tos, fr8_st_map;
-
-	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
-		return(-EFAULT);
-
-	/*
-	 * Updating fsr, fcr, fir, fdr.
-	 * Just a bit more complicated than save.
-	 * - Need to make sure that we don't write any value other than the
-	 *   specific fpstate info
-	 * - Need to make sure that the untouched part of frs, fdr, fir, fcr
-	 *   should remain same while writing.
-	 * So, we do a read, change specific fields and write.
-	 */
-	fsr = ia64_getreg(_IA64_REG_AR_FSR);
-	fcr = ia64_getreg(_IA64_REG_AR_FCR);
-	fir = ia64_getreg(_IA64_REG_AR_FIR);
-	fdr = ia64_getreg(_IA64_REG_AR_FDR);
-
-	__get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
-	/* setting bits 0..5 8..12 with cw and 39..47 from mxcsr */
-	__get_user(lo, (unsigned int __user *)&save->cw);
-	num64 = mxcsr & 0xff10;
-	num64 = (num64 << 32) | (lo & 0x1f3f);
-	fcr = (fcr & (~0xff1000001f3fUL)) | num64;
-
-	/* setting bits 0..31 with sw and tag and 32..37 from mxcsr */
-	__get_user(lo, (unsigned int __user *)&save->sw);
-	/* set bits 15,7 (fsw.b, fsw.es) to reflect the current error status */
-	if ( !(lo & 0x7f) )
-		lo &= (~0x8080);
-	__get_user(hi, (unsigned int __user *)&save->tag);
-	num64 = mxcsr & 0x3f;
-	num64 = (num64 << 16) | (hi & 0xffff);
-	num64 = (num64 << 16) | (lo & 0xffff);
-	fsr = (fsr & (~0x3fffffffffUL)) | num64;
-
-	/* setting bits 0..47 with cssel and ipoff */
-	__get_user(lo, (unsigned int __user *)&save->ipoff);
-	__get_user(hi, (unsigned int __user *)&save->cssel);
-	num64 = hi & 0xffff;
-	num64 = (num64 << 32) | lo;
-	fir = (fir & (~0xffffffffffffUL)) | num64;
-
-	/* setting bits 0..47 with datasel and dataoff */
-	__get_user(lo, (unsigned int __user *)&save->dataoff);
-	__get_user(hi, (unsigned int __user *)&save->datasel);
-	num64 = hi & 0xffff;
-	num64 = (num64 << 32) | lo;
-	fdr = (fdr & (~0xffffffffffffUL)) | num64;
-
-	ia64_setreg(_IA64_REG_AR_FSR, fsr);
-	ia64_setreg(_IA64_REG_AR_FCR, fcr);
-	ia64_setreg(_IA64_REG_AR_FIR, fir);
-	ia64_setreg(_IA64_REG_AR_FDR, fdr);
-
-	/*
-	 * restore f8..f11 onto pt_regs
-	 * restore f12..f15 onto live registers
-	 */
-	/*
-	 *  Find the location where f8 has to go in fp reg stack.  This depends on
-	 *  TOP(11:13) field of sw. Other f reg continue sequentially from where f8 maps
-	 *  to.
-	 */
-	fp_tos = (fsr>>11)&0x7;
-	fr8_st_map = (8-fp_tos)&0x7;
-	fpregp = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
-
-	ptp = task_pt_regs(tsk);
-	copy_from_user(fpregp, &save->_st[(0+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia32f2ia64f(&ptp->f8, fpregp);
-	copy_from_user(fpregp, &save->_st[(1+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia32f2ia64f(&ptp->f9, fpregp);
-	copy_from_user(fpregp, &save->_st[(2+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia32f2ia64f(&ptp->f10, fpregp);
-	copy_from_user(fpregp, &save->_st[(3+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia32f2ia64f(&ptp->f11, fpregp);
-
-	copy_from_user(fpregp, &save->_st[(4+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia64_ldfe(12, fpregp);
-	copy_from_user(fpregp, &save->_st[(5+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia64_ldfe(13, fpregp);
-	copy_from_user(fpregp, &save->_st[(6+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia64_ldfe(14, fpregp);
-	copy_from_user(fpregp, &save->_st[(7+fr8_st_map)&0x7], sizeof(struct _fpreg_ia32));
-	ia64_ldfe(15, fpregp);
-
-	copy_from_user(num128, &save->_xmm[0], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(16, &num128[0]);
-	ia64_ldf8(17, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[1], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(18, &num128[0]);
-	ia64_ldf8(19, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[2], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(20, &num128[0]);
-	ia64_ldf8(21, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[3], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(22, &num128[0]);
-	ia64_ldf8(23, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[4], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(24, &num128[0]);
-	ia64_ldf8(25, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[5], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(26, &num128[0]);
-	ia64_ldf8(27, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[6], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(28, &num128[0]);
-	ia64_ldf8(29, &num128[1]);
-
-	copy_from_user(num128, &save->_xmm[7], sizeof(struct _xmmreg_ia32));
-	ia64_ldf8(30, &num128[0]);
-	ia64_ldf8(31, &num128[1]);
-	return 0;
-}
-
-static inline void
-sigact_set_handler (struct k_sigaction *sa, unsigned int handler, unsigned int restorer)
-{
-	if (handler + 1 <= 2)
-		/* SIG_DFL, SIG_IGN, or SIG_ERR: must sign-extend to 64-bits */
-		sa->sa.sa_handler = (__sighandler_t) A((int) handler);
-	else
-		sa->sa.sa_handler = (__sighandler_t) (((unsigned long) restorer << 32) | handler);
-}
-
-asmlinkage long
-sys32_sigsuspend (int history0, int history1, old_sigset_t mask)
-{
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage long
-sys32_signal (int sig, unsigned int handler)
-{
-	struct k_sigaction new_sa, old_sa;
-	int ret;
-
-	sigact_set_handler(&new_sa, handler, 0);
-	new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
-	sigemptyset(&new_sa.sa.sa_mask);
-
-	ret = do_sigaction(sig, &new_sa, &old_sa);
-
-	return ret ? ret : IA32_SA_HANDLER(&old_sa);
-}
-
-asmlinkage long
-sys32_rt_sigaction (int sig, struct sigaction32 __user *act,
-		    struct sigaction32 __user *oact, unsigned int sigsetsize)
-{
-	struct k_sigaction new_ka, old_ka;
-	unsigned int handler, restorer;
-	int ret;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(compat_sigset_t))
-		return -EINVAL;
-
-	if (act) {
-		ret = get_user(handler, &act->sa_handler);
-		ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		ret |= get_user(restorer, &act->sa_restorer);
-		ret |= copy_from_user(&new_ka.sa.sa_mask, &act->sa_mask, sizeof(compat_sigset_t));
-		if (ret)
-			return -EFAULT;
-
-		sigact_set_handler(&new_ka, handler, restorer);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
-		ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
-		ret |= copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, sizeof(compat_sigset_t));
-	}
-	return ret;
-}
-
-
-asmlinkage long
-sys32_rt_sigprocmask (int how, compat_sigset_t __user *set, compat_sigset_t __user *oset,
-		      unsigned int sigsetsize)
-{
-	mm_segment_t old_fs = get_fs();
-	sigset_t s;
-	long ret;
-
-	if (sigsetsize > sizeof(s))
-		return -EINVAL;
-
-	if (set) {
-		memset(&s, 0, sizeof(s));
-		if (copy_from_user(&s.sig, set, sigsetsize))
-			return -EFAULT;
-	}
-	set_fs(KERNEL_DS);
-	ret = sys_rt_sigprocmask(how,
-				 set ? (sigset_t __user *) &s : NULL,
-				 oset ? (sigset_t __user *) &s : NULL, sizeof(s));
-	set_fs(old_fs);
-	if (ret)
-		return ret;
-	if (oset) {
-		if (copy_to_user(oset, &s.sig, sigsetsize))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-asmlinkage long
-sys32_rt_sigqueueinfo (int pid, int sig, compat_siginfo_t __user *uinfo)
-{
-	mm_segment_t old_fs = get_fs();
-	siginfo_t info;
-	int ret;
-
-	if (copy_siginfo_from_user32(&info, uinfo))
-		return -EFAULT;
-	set_fs(KERNEL_DS);
-	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
-	set_fs(old_fs);
-	return ret;
-}
-
-asmlinkage long
-sys32_sigaction (int sig, struct old_sigaction32 __user *act, struct old_sigaction32 __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	unsigned int handler, restorer;
-	int ret;
-
-	if (act) {
-		compat_old_sigset_t mask;
-
-		ret = get_user(handler, &act->sa_handler);
-		ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		ret |= get_user(restorer, &act->sa_restorer);
-		ret |= get_user(mask, &act->sa_mask);
-		if (ret)
-			return ret;
-
-		sigact_set_handler(&new_ka, handler, restorer);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		ret = put_user(IA32_SA_HANDLER(&old_ka), &oact->sa_handler);
-		ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		ret |= put_user(IA32_SA_RESTORER(&old_ka), &oact->sa_restorer);
-		ret |= put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-static int
-setup_sigcontext_ia32 (struct sigcontext_ia32 __user *sc, struct _fpstate_ia32 __user *fpstate,
-		       struct pt_regs *regs, unsigned long mask)
-{
-	int  err = 0;
-	unsigned long flag;
-
-	if (!access_ok(VERIFY_WRITE, sc, sizeof(*sc)))
-		return -EFAULT;
-
-	err |= __put_user((regs->r16 >> 32) & 0xffff, (unsigned int __user *)&sc->fs);
-	err |= __put_user((regs->r16 >> 48) & 0xffff, (unsigned int __user *)&sc->gs);
-	err |= __put_user((regs->r16 >> 16) & 0xffff, (unsigned int __user *)&sc->es);
-	err |= __put_user(regs->r16 & 0xffff, (unsigned int __user *)&sc->ds);
-	err |= __put_user(regs->r15, &sc->edi);
-	err |= __put_user(regs->r14, &sc->esi);
-	err |= __put_user(regs->r13, &sc->ebp);
-	err |= __put_user(regs->r12, &sc->esp);
-	err |= __put_user(regs->r11, &sc->ebx);
-	err |= __put_user(regs->r10, &sc->edx);
-	err |= __put_user(regs->r9, &sc->ecx);
-	err |= __put_user(regs->r8, &sc->eax);
-#if 0
-	err |= __put_user(current->tss.trap_no, &sc->trapno);
-	err |= __put_user(current->tss.error_code, &sc->err);
-#endif
-	err |= __put_user(regs->cr_iip, &sc->eip);
-	err |= __put_user(regs->r17 & 0xffff, (unsigned int __user *)&sc->cs);
-	/*
-	 *  `eflags' is in an ar register for this context
-	 */
-	flag = ia64_getreg(_IA64_REG_AR_EFLAG);
-	err |= __put_user((unsigned int)flag, &sc->eflags);
-	err |= __put_user(regs->r12, &sc->esp_at_signal);
-	err |= __put_user((regs->r17 >> 16) & 0xffff, (unsigned int __user *)&sc->ss);
-
-	if ( save_ia32_fpstate_live(fpstate) < 0 )
-		err = -EFAULT;
-	else
-		err |= __put_user((u32)(u64)fpstate, &sc->fpstate);
-
-#if 0
-	tmp = save_i387(fpstate);
-	if (tmp < 0)
-		err = 1;
-	else
-		err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
-
-	/* non-iBCS2 extensions.. */
-#endif
-	err |= __put_user(mask, &sc->oldmask);
-#if 0
-	err |= __put_user(current->tss.cr2, &sc->cr2);
-#endif
-	return err;
-}
-
-static int
-restore_sigcontext_ia32 (struct pt_regs *regs, struct sigcontext_ia32 __user *sc, int *peax)
-{
-	unsigned int err = 0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
-		return(-EFAULT);
-
-#define COPY(ia64x, ia32x)	err |= __get_user(regs->ia64x, &sc->ia32x)
-
-#define copyseg_gs(tmp)		(regs->r16 |= (unsigned long) (tmp) << 48)
-#define copyseg_fs(tmp)		(regs->r16 |= (unsigned long) (tmp) << 32)
-#define copyseg_cs(tmp)		(regs->r17 |= tmp)
-#define copyseg_ss(tmp)		(regs->r17 |= (unsigned long) (tmp) << 16)
-#define copyseg_es(tmp)		(regs->r16 |= (unsigned long) (tmp) << 16)
-#define copyseg_ds(tmp)		(regs->r16 |= tmp)
-
-#define COPY_SEG(seg)					\
-	{						\
-		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
-		copyseg_##seg(tmp);			\
-	}
-#define COPY_SEG_STRICT(seg)				\
-	{						\
-		unsigned short tmp;			\
-		err |= __get_user(tmp, &sc->seg);	\
-		copyseg_##seg(tmp|3);			\
-	}
-
-	/* To make COPY_SEGs easier, we zero r16, r17 */
-	regs->r16 = 0;
-	regs->r17 = 0;
-
-	COPY_SEG(gs);
-	COPY_SEG(fs);
-	COPY_SEG(es);
-	COPY_SEG(ds);
-	COPY(r15, edi);
-	COPY(r14, esi);
-	COPY(r13, ebp);
-	COPY(r12, esp);
-	COPY(r11, ebx);
-	COPY(r10, edx);
-	COPY(r9, ecx);
-	COPY(cr_iip, eip);
-	COPY_SEG_STRICT(cs);
-	COPY_SEG_STRICT(ss);
-	ia32_load_segment_descriptors(current);
-	{
-		unsigned int tmpflags;
-		unsigned long flag;
-
-		/*
-		 *  IA32 `eflags' is not part of `pt_regs', it's in an ar register which
-		 *  is part of the thread context.  Fortunately, we are executing in the
-		 *  IA32 process's context.
-		 */
-		err |= __get_user(tmpflags, &sc->eflags);
-		flag = ia64_getreg(_IA64_REG_AR_EFLAG);
-		flag &= ~0x40DD5;
-		flag |= (tmpflags & 0x40DD5);
-		ia64_setreg(_IA64_REG_AR_EFLAG, flag);
-
-		regs->r1 = -1;	/* disable syscall checks, r1 is orig_eax */
-	}
-
-	{
-		struct _fpstate_ia32 __user *buf = NULL;
-		u32    fpstate_ptr;
-		err |= get_user(fpstate_ptr, &(sc->fpstate));
-		buf = compat_ptr(fpstate_ptr);
-		if (buf) {
-			err |= restore_ia32_fpstate_live(buf);
-		}
-	}
-
-#if 0
-	{
-		struct _fpstate * buf;
-		err |= __get_user(buf, &sc->fpstate);
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		}
-	}
-#endif
-
-	err |= __get_user(*peax, &sc->eax);
-	return err;
-
-#if 0
-  badframe:
-	return 1;
-#endif
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe (struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
-{
-	unsigned long esp;
-
-	/* Default to using normal stack (truncate off sign-extension of bit 31: */
-	esp = (unsigned int) regs->r12;
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		int onstack = sas_ss_flags(esp);
-
-		if (onstack == 0)
-			esp = current->sas_ss_sp + current->sas_ss_size;
-		else if (onstack == SS_ONSTACK) {
-			/*
-			 * If we are on the alternate signal stack and would
-			 * overflow it, don't. Return an always-bogus address
-			 * instead so we will die with SIGSEGV.
-			 */
-			if (!likely(on_sig_stack(esp - frame_size)))
-				return (void __user *) -1L;
-		}
-	}
-	/* Legacy stack switching not supported */
-
-	esp -= frame_size;
-	/* Align the stack pointer according to the i386 ABI,
-	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
-	esp = ((esp + 4) & -16ul) - 4;
-	return (void __user *) esp;
-}
-
-static int
-setup_frame_ia32 (int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs * regs)
-{
-	struct exec_domain *ed = current_thread_info()->exec_domain;
-	struct sigframe_ia32 __user *frame;
-	int err = 0;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	err |= __put_user((ed && ed->signal_invmap && sig < 32
-			   ? (int)(ed->signal_invmap[sig]) : sig), &frame->sig);
-
-	err |= setup_sigcontext_ia32(&frame->sc, &frame->fpstate, regs, set->sig[0]);
-
-	if (_COMPAT_NSIG_WORDS > 1)
-		err |= __copy_to_user(frame->extramask, (char *) &set->sig + 4,
-				      sizeof(frame->extramask));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		unsigned int restorer = IA32_SA_RESTORER(ka);
-		err |= __put_user(restorer, &frame->pretcode);
-	} else {
-		/* Pointing to restorer in ia32 gate page */
-		err |= __put_user(IA32_GATE_OFFSET, &frame->pretcode);
-	}
-
-	/* This is popl %eax ; movl $,%eax ; int $0x80
-	 * and there for historical reasons only.
-	 * See arch/i386/kernel/signal.c
-	 */
-
-	err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
-	err |= __put_user(__IA32_NR_sigreturn, (int __user *)(frame->retcode+2));
-	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	regs->r12 = (unsigned long) frame;
-	regs->cr_iip = IA32_SA_HANDLER(ka);
-
-	set_fs(USER_DS);
-
-#if 0
-	regs->eflags &= ~TF_MASK;
-#endif
-
-#if 0
-	printk("SIG deliver (%s:%d): sig=%d sp=%p pc=%lx ra=%x\n",
-               current->comm, current->pid, sig, (void *) frame, regs->cr_iip, frame->pretcode);
-#endif
-
-	return 1;
-
-  give_sigsegv:
-	force_sigsegv(sig, current);
-	return 0;
-}
-
-static int
-setup_rt_frame_ia32 (int sig, struct k_sigaction *ka, siginfo_t *info,
-		     sigset_t *set, struct pt_regs * regs)
-{
-	struct exec_domain *ed = current_thread_info()->exec_domain;
-	compat_uptr_t pinfo, puc;
-	struct rt_sigframe_ia32 __user *frame;
-	int err = 0;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	err |= __put_user((ed && ed->signal_invmap
-			   && sig < 32 ? ed->signal_invmap[sig] : sig), &frame->sig);
-
-	pinfo = (long __user) &frame->info;
-	puc = (long __user) &frame->uc;
-	err |= __put_user(pinfo, &frame->pinfo);
-	err |= __put_user(puc, &frame->puc);
-	err |= copy_siginfo_to_user32(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->r12), &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext_ia32(&frame->uc.uc_mcontext, &frame->fpstate, regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		unsigned int restorer = IA32_SA_RESTORER(ka);
-		err |= __put_user(restorer, &frame->pretcode);
-	} else {
-		/* Pointing to rt_restorer in ia32 gate page */
-		err |= __put_user(IA32_GATE_OFFSET + 8, &frame->pretcode);
-	}
-
-	/* This is movl $,%eax ; int $0x80
-	 * and there for historical reasons only.
-	 * See arch/i386/kernel/signal.c
-	 */
-
-	err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
-	err |= __put_user(__IA32_NR_rt_sigreturn, (int __user *)(frame->retcode+1));
-	err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler */
-	regs->r12 = (unsigned long) frame;
-	regs->cr_iip = IA32_SA_HANDLER(ka);
-
-	set_fs(USER_DS);
-
-#if 0
-	regs->eflags &= ~TF_MASK;
-#endif
-
-#if 0
-	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%x\n",
-               current->comm, current->pid, (void *) frame, regs->cr_iip, frame->pretcode);
-#endif
-
-	return 1;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return 0;
-}
-
-int
-ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
-		   sigset_t *set, struct pt_regs *regs)
-{
-       /* Set up the stack frame */
-       if (ka->sa.sa_flags & SA_SIGINFO)
-               return setup_rt_frame_ia32(sig, ka, info, set, regs);
-       else
-               return setup_frame_ia32(sig, ka, set, regs);
-}
-
-asmlinkage long
-sys32_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4, int arg5,
-		 int arg6, int arg7, struct pt_regs regs)
-{
-	unsigned long esp = (unsigned int) regs.r12;
-	struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(esp - 8);
-	sigset_t set;
-	int eax;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_COMPAT_NSIG_WORDS > 1 && __copy_from_user((char *) &set.sig + 4, &frame->extramask,
-							 sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext_ia32(&regs, &frame->sc, &eax))
-		goto badframe;
-	return eax;
-
-  badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage long
-sys32_rt_sigreturn (int arg0, int arg1, int arg2, int arg3, int arg4,
-		    int arg5, int arg6, int arg7, struct pt_regs regs)
-{
-	unsigned long esp = (unsigned int) regs.r12;
-	struct rt_sigframe_ia32 __user *frame = (struct rt_sigframe_ia32 __user *)(esp - 4);
-	sigset_t set;
-	int eax;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked =  set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext_ia32(&regs, &frame->uc.uc_mcontext, &eax))
-		goto badframe;
-
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack((stack_t __user *) &frame->uc.uc_stack, NULL, esp);
-
-	return eax;
-
-  badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
deleted file mode 100644
index a6965dd..0000000
--- a/arch/ia64/ia32/ia32_support.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * IA32 helper functions
- *
- * Copyright (C) 1999 Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2001-2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 thread context
- * 02/19/01	D. Mosberger	dropped tssd; it's not needed
- * 09/14/01	D. Mosberger	fixed memory management for gdt/tss page
- * 09/29/01	D. Mosberger	added ia32_load_segment_descriptors()
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-
-#include <asm/intrinsics.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-#include "ia32priv.h"
-
-extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
-
-struct page *ia32_shared_page[NR_CPUS];
-unsigned long *ia32_boot_gdt;
-unsigned long *cpu_gdt_table[NR_CPUS];
-struct page *ia32_gate_page;
-
-static unsigned long
-load_desc (u16 selector)
-{
-	unsigned long *table, limit, index;
-
-	if (!selector)
-		return 0;
-	if (selector & IA32_SEGSEL_TI) {
-		table = (unsigned long *) IA32_LDT_OFFSET;
-		limit = IA32_LDT_ENTRIES;
-	} else {
-		table = cpu_gdt_table[smp_processor_id()];
-		limit = IA32_PAGE_SIZE / sizeof(ia32_boot_gdt[0]);
-	}
-	index = selector >> IA32_SEGSEL_INDEX_SHIFT;
-	if (index >= limit)
-		return 0;
-	return IA32_SEG_UNSCRAMBLE(table[index]);
-}
-
-void
-ia32_load_segment_descriptors (struct task_struct *task)
-{
-	struct pt_regs *regs = task_pt_regs(task);
-
-	/* Setup the segment descriptors */
-	regs->r24 = load_desc(regs->r16 >> 16);		/* ESD */
-	regs->r27 = load_desc(regs->r16 >>  0);		/* DSD */
-	regs->r28 = load_desc(regs->r16 >> 32);		/* FSD */
-	regs->r29 = load_desc(regs->r16 >> 48);		/* GSD */
-	regs->ar_csd = load_desc(regs->r17 >>  0);	/* CSD */
-	regs->ar_ssd = load_desc(regs->r17 >> 16);	/* SSD */
-}
-
-int
-ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs)
-{
-	struct desc_struct *desc;
-	struct ia32_user_desc info;
-	int idx;
-
-	if (copy_from_user(&info, (void __user *)(childregs->r14 & 0xffffffff), sizeof(info)))
-		return -EFAULT;
-	if (LDT_empty(&info))
-		return -EINVAL;
-
-	idx = info.entry_number;
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-
-	desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
-	desc->a = LDT_entry_a(&info);
-	desc->b = LDT_entry_b(&info);
-
-	/* XXX: can this be done in a cleaner way ? */
-	load_TLS(&child->thread, smp_processor_id());
-	ia32_load_segment_descriptors(child);
-	load_TLS(&current->thread, smp_processor_id());
-
-	return 0;
-}
-
-void
-ia32_save_state (struct task_struct *t)
-{
-	t->thread.eflag = ia64_getreg(_IA64_REG_AR_EFLAG);
-	t->thread.fsr   = ia64_getreg(_IA64_REG_AR_FSR);
-	t->thread.fcr   = ia64_getreg(_IA64_REG_AR_FCR);
-	t->thread.fir   = ia64_getreg(_IA64_REG_AR_FIR);
-	t->thread.fdr   = ia64_getreg(_IA64_REG_AR_FDR);
-	ia64_set_kr(IA64_KR_IO_BASE, t->thread.old_iob);
-	ia64_set_kr(IA64_KR_TSSD, t->thread.old_k1);
-}
-
-void
-ia32_load_state (struct task_struct *t)
-{
-	unsigned long eflag, fsr, fcr, fir, fdr, tssd;
-	struct pt_regs *regs = task_pt_regs(t);
-
-	eflag = t->thread.eflag;
-	fsr = t->thread.fsr;
-	fcr = t->thread.fcr;
-	fir = t->thread.fir;
-	fdr = t->thread.fdr;
-	tssd = load_desc(_TSS);					/* TSSD */
-
-	ia64_setreg(_IA64_REG_AR_EFLAG, eflag);
-	ia64_setreg(_IA64_REG_AR_FSR, fsr);
-	ia64_setreg(_IA64_REG_AR_FCR, fcr);
-	ia64_setreg(_IA64_REG_AR_FIR, fir);
-	ia64_setreg(_IA64_REG_AR_FDR, fdr);
-	current->thread.old_iob = ia64_get_kr(IA64_KR_IO_BASE);
-	current->thread.old_k1 = ia64_get_kr(IA64_KR_TSSD);
-	ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
-	ia64_set_kr(IA64_KR_TSSD, tssd);
-
-	regs->r17 = (_TSS << 48) | (_LDT << 32) | (__u32) regs->r17;
-	regs->r30 = load_desc(_LDT);				/* LDTD */
-	load_TLS(&t->thread, smp_processor_id());
-}
-
-/*
- * Setup IA32 GDT and TSS
- */
-void
-ia32_gdt_init (void)
-{
-	int cpu = smp_processor_id();
-
-	ia32_shared_page[cpu] = alloc_page(GFP_KERNEL);
-	if (!ia32_shared_page[cpu])
-		panic("failed to allocate ia32_shared_page[%d]\n", cpu);
-
-	cpu_gdt_table[cpu] = page_address(ia32_shared_page[cpu]);
-
-	/* Copy from the boot cpu's GDT */
-	memcpy(cpu_gdt_table[cpu], ia32_boot_gdt, PAGE_SIZE);
-}
-
-
-/*
- * Setup IA32 GDT and TSS
- */
-static void
-ia32_boot_gdt_init (void)
-{
-	unsigned long ldt_size;
-
-	ia32_shared_page[0] = alloc_page(GFP_KERNEL);
-	if (!ia32_shared_page[0])
-		panic("failed to allocate ia32_shared_page[0]\n");
-
-	ia32_boot_gdt = page_address(ia32_shared_page[0]);
-	cpu_gdt_table[0] = ia32_boot_gdt;
-
-	/* CS descriptor in IA-32 (scrambled) format */
-	ia32_boot_gdt[__USER_CS >> 3]
-		= IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
-				      0xb, 1, 3, 1, 1, 1, 1);
-
-	/* DS descriptor in IA-32 (scrambled) format */
-	ia32_boot_gdt[__USER_DS >> 3]
-		= IA32_SEG_DESCRIPTOR(0, (IA32_GATE_END-1) >> IA32_PAGE_SHIFT,
-				      0x3, 1, 3, 1, 1, 1, 1);
-
-	ldt_size = PAGE_ALIGN(IA32_LDT_ENTRIES*IA32_LDT_ENTRY_SIZE);
-	ia32_boot_gdt[TSS_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_TSS_OFFSET, 235,
-						       0xb, 0, 3, 1, 1, 1, 0);
-	ia32_boot_gdt[LDT_ENTRY] = IA32_SEG_DESCRIPTOR(IA32_LDT_OFFSET, ldt_size - 1,
-						       0x2, 0, 3, 1, 1, 1, 0);
-}
-
-static void
-ia32_gate_page_init(void)
-{
-	unsigned long *sr;
-
-	ia32_gate_page = alloc_page(GFP_KERNEL);
-	sr = page_address(ia32_gate_page);
-	/* This is popl %eax ; movl $,%eax ; int $0x80 */
-	*sr++ = 0xb858 | (__IA32_NR_sigreturn << 16) | (0x80cdUL << 48);
-
-	/* This is movl $,%eax ; int $0x80 */
-	*sr = 0xb8 | (__IA32_NR_rt_sigreturn << 8) | (0x80cdUL << 40);
-}
-
-void
-ia32_mem_init(void)
-{
-	ia32_boot_gdt_init();
-	ia32_gate_page_init();
-}
-
-/*
- * Handle bad IA32 interrupt via syscall
- */
-void
-ia32_bad_interrupt (unsigned long int_num, struct pt_regs *regs)
-{
-	siginfo_t siginfo;
-
-	if (die_if_kernel("Bad IA-32 interrupt", regs, int_num))
-		return;
-
-	siginfo.si_signo = SIGTRAP;
-	siginfo.si_errno = int_num;	/* XXX is it OK to abuse si_errno like this? */
-	siginfo.si_flags = 0;
-	siginfo.si_isr = 0;
-	siginfo.si_addr = NULL;
-	siginfo.si_imm = 0;
-	siginfo.si_code = TRAP_BRKPT;
-	force_sig_info(SIGTRAP, &siginfo, current);
-}
-
-void
-ia32_cpu_init (void)
-{
-	/* initialize global ia32 state - CR0 and CR4 */
-	ia64_setreg(_IA64_REG_AR_CFLAG, (((ulong) IA32_CR4 << 32) | IA32_CR0));
-}
-
-static int __init
-ia32_init (void)
-{
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-	{
-		extern struct kmem_cache *ia64_partial_page_cachep;
-
-		ia64_partial_page_cachep = kmem_cache_create("ia64_partial_page_cache",
-					sizeof(struct ia64_partial_page),
-					0, SLAB_PANIC, NULL);
-	}
-#endif
-	return 0;
-}
-
-__initcall(ia32_init);
diff --git a/arch/ia64/ia32/ia32_traps.c b/arch/ia64/ia32/ia32_traps.c
deleted file mode 100644
index e486042..0000000
--- a/arch/ia64/ia32/ia32_traps.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * IA-32 exception handlers
- *
- * Copyright (C) 2000 Asit K. Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2001-2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *
- * 06/16/00	A. Mallick	added siginfo for most cases (close to IA32)
- * 09/29/00	D. Mosberger	added ia32_intercept()
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include "ia32priv.h"
-
-#include <asm/intrinsics.h>
-#include <asm/ptrace.h>
-
-int
-ia32_intercept (struct pt_regs *regs, unsigned long isr)
-{
-	switch ((isr >> 16) & 0xff) {
-	      case 0:	/* Instruction intercept fault */
-	      case 4:	/* Locked Data reference fault */
-	      case 1:	/* Gate intercept trap */
-		return -1;
-
-	      case 2:	/* System flag trap */
-		if (((isr >> 14) & 0x3) >= 2) {
-			/* MOV SS, POP SS instructions */
-			ia64_psr(regs)->id = 1;
-			return 0;
-		} else
-			return -1;
-	}
-	return -1;
-}
-
-int
-ia32_exception (struct pt_regs *regs, unsigned long isr)
-{
-	struct siginfo siginfo;
-
-	/* initialize these fields to avoid leaking kernel bits to user space: */
-	siginfo.si_errno = 0;
-	siginfo.si_flags = 0;
-	siginfo.si_isr = 0;
-	siginfo.si_imm = 0;
-	switch ((isr >> 16) & 0xff) {
-	      case 1:
-	      case 2:
-		siginfo.si_signo = SIGTRAP;
-		if (isr == 0)
-			siginfo.si_code = TRAP_TRACE;
-		else if (isr & 0x4)
-			siginfo.si_code = TRAP_BRANCH;
-		else
-			siginfo.si_code = TRAP_BRKPT;
-		break;
-
-	      case 3:
-		siginfo.si_signo = SIGTRAP;
-		siginfo.si_code = TRAP_BRKPT;
-		break;
-
-	      case 0:	/* Divide fault */
-		siginfo.si_signo = SIGFPE;
-		siginfo.si_code = FPE_INTDIV;
-		break;
-
-	      case 4:	/* Overflow */
-	      case 5:	/* Bounds fault */
-		siginfo.si_signo = SIGFPE;
-		siginfo.si_code = 0;
-		break;
-
-	      case 6:	/* Invalid Op-code */
-		siginfo.si_signo = SIGILL;
-		siginfo.si_code = ILL_ILLOPN;
-		break;
-
-	      case 7:	/* FP DNA */
-	      case 8:	/* Double Fault */
-	      case 9:	/* Invalid TSS */
-	      case 11:	/* Segment not present */
-	      case 12:	/* Stack fault */
-	      case 13:	/* General Protection Fault */
-		siginfo.si_signo = SIGSEGV;
-		siginfo.si_code = 0;
-		break;
-
-	      case 16:	/* Pending FP error */
-		{
-			unsigned long fsr, fcr;
-
-			fsr = ia64_getreg(_IA64_REG_AR_FSR);
-			fcr = ia64_getreg(_IA64_REG_AR_FCR);
-
-			siginfo.si_signo = SIGFPE;
-			/*
-			 * (~cwd & swd) will mask out exceptions that are not set to unmasked
-			 * status.  0x3f is the exception bits in these regs, 0x200 is the
-			 * C1 reg you need in case of a stack fault, 0x040 is the stack
-			 * fault bit.  We should only be taking one exception at a time,
-			 * so if this combination doesn't produce any single exception,
-			 * then we have a bad program that isn't synchronizing its FPU usage
-			 * and it will suffer the consequences since we won't be able to
-			 * fully reproduce the context of the exception
-			 */
-			siginfo.si_isr = isr;
-			siginfo.si_flags = __ISR_VALID;
-			switch(((~fcr) & (fsr & 0x3f)) | (fsr & 0x240)) {
-				case 0x000:
-				default:
-					siginfo.si_code = 0;
-					break;
-				case 0x001: /* Invalid Op */
-				case 0x040: /* Stack Fault */
-				case 0x240: /* Stack Fault | Direction */
-					siginfo.si_code = FPE_FLTINV;
-					break;
-				case 0x002: /* Denormalize */
-				case 0x010: /* Underflow */
-					siginfo.si_code = FPE_FLTUND;
-					break;
-				case 0x004: /* Zero Divide */
-					siginfo.si_code = FPE_FLTDIV;
-					break;
-				case 0x008: /* Overflow */
-					siginfo.si_code = FPE_FLTOVF;
-					break;
-				case 0x020: /* Precision */
-					siginfo.si_code = FPE_FLTRES;
-					break;
-			}
-
-			break;
-		}
-
-	      case 17:	/* Alignment check */
-		siginfo.si_signo = SIGSEGV;
-		siginfo.si_code = BUS_ADRALN;
-		break;
-
-	      case 19:	/* SSE Numeric error */
-		siginfo.si_signo = SIGFPE;
-		siginfo.si_code = 0;
-		break;
-
-	      default:
-		return -1;
-	}
-	force_sig_info(siginfo.si_signo, &siginfo, current);
-	return 0;
-}
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
deleted file mode 100644
index 0f15349..0000000
--- a/arch/ia64/ia32/ia32priv.h
+++ /dev/null
@@ -1,532 +0,0 @@
-#ifndef _ASM_IA64_IA32_PRIV_H
-#define _ASM_IA64_IA32_PRIV_H
-
-
-#include <asm/ia32.h>
-
-#ifdef CONFIG_IA32_SUPPORT
-
-#include <linux/binfmts.h>
-#include <linux/compat.h>
-#include <linux/rbtree.h>
-
-#include <asm/processor.h>
-
-/*
- * 32 bit structures for IA32 support.
- */
-
-#define IA32_PAGE_SIZE		(1UL << IA32_PAGE_SHIFT)
-#define IA32_PAGE_MASK		(~(IA32_PAGE_SIZE - 1))
-#define IA32_PAGE_ALIGN(addr)	(((addr) + IA32_PAGE_SIZE - 1) & IA32_PAGE_MASK)
-#define IA32_CLOCKS_PER_SEC	100	/* Cast in stone for IA32 Linux */
-
-/*
- * partially mapped pages provide precise accounting of which 4k sub pages
- * are mapped and which ones are not, thereby improving IA-32 compatibility.
- */
-struct ia64_partial_page {
-	struct ia64_partial_page *next; /* linked list, sorted by address */
-	struct rb_node		pp_rb;
-	/* 64K is the largest "normal" page supported by ia64 ABI. So 4K*64
-	 * should suffice.*/
-	unsigned long		bitmap;
-	unsigned int		base;
-};
-
-struct ia64_partial_page_list {
-	struct ia64_partial_page *pp_head; /* list head, points to the lowest
-					   * addressed partial page */
-	struct rb_root		ppl_rb;
-	struct ia64_partial_page *pp_hint; /* pp_hint->next is the last
-					   * accessed partial page */
-	atomic_t		pp_count; /* reference count */
-};
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-struct ia64_partial_page_list* ia32_init_pp_list (void);
-#else
-# define ia32_init_pp_list()	0
-#endif
-
-/* sigcontext.h */
-/*
- * As documented in the iBCS2 standard..
- *
- * The first part of "struct _fpstate" is just the
- * normal i387 hardware setup, the extra "status"
- * word is used to save the coprocessor status word
- * before entering the handler.
- */
-struct _fpreg_ia32 {
-       unsigned short significand[4];
-       unsigned short exponent;
-};
-
-struct _fpxreg_ia32 {
-        unsigned short significand[4];
-        unsigned short exponent;
-        unsigned short padding[3];
-};
-
-struct _xmmreg_ia32 {
-        unsigned int element[4];
-};
-
-
-struct _fpstate_ia32 {
-       unsigned int    cw,
-		       sw,
-		       tag,
-		       ipoff,
-		       cssel,
-		       dataoff,
-		       datasel;
-       struct _fpreg_ia32      _st[8];
-       unsigned short  status;
-       unsigned short  magic;          /* 0xffff = regular FPU data only */
-
-       /* FXSR FPU environment */
-       unsigned int         _fxsr_env[6];   /* FXSR FPU env is ignored */
-       unsigned int         mxcsr;
-       unsigned int         reserved;
-       struct _fpxreg_ia32  _fxsr_st[8];    /* FXSR FPU reg data is ignored */
-       struct _xmmreg_ia32  _xmm[8];
-       unsigned int         padding[56];
-};
-
-struct sigcontext_ia32 {
-       unsigned short gs, __gsh;
-       unsigned short fs, __fsh;
-       unsigned short es, __esh;
-       unsigned short ds, __dsh;
-       unsigned int edi;
-       unsigned int esi;
-       unsigned int ebp;
-       unsigned int esp;
-       unsigned int ebx;
-       unsigned int edx;
-       unsigned int ecx;
-       unsigned int eax;
-       unsigned int trapno;
-       unsigned int err;
-       unsigned int eip;
-       unsigned short cs, __csh;
-       unsigned int eflags;
-       unsigned int esp_at_signal;
-       unsigned short ss, __ssh;
-       unsigned int fpstate;		/* really (struct _fpstate_ia32 *) */
-       unsigned int oldmask;
-       unsigned int cr2;
-};
-
-/* user.h */
-/*
- * IA32 (Pentium III/4) FXSR, SSE support
- *
- * Provide support for the GDB 5.0+ PTRACE_{GET|SET}FPXREGS requests for
- * interacting with the FXSR-format floating point environment.  Floating
- * point data can be accessed in the regular format in the usual manner,
- * and both the standard and SIMD floating point data can be accessed via
- * the new ptrace requests.  In either case, changes to the FPU environment
- * will be reflected in the task's state as expected.
- */
-struct ia32_user_i387_struct {
-	int	cwd;
-	int	swd;
-	int	twd;
-	int	fip;
-	int	fcs;
-	int	foo;
-	int	fos;
-	/* 8*10 bytes for each FP-reg = 80 bytes */
-	struct _fpreg_ia32 	st_space[8];
-};
-
-struct ia32_user_fxsr_struct {
-	unsigned short	cwd;
-	unsigned short	swd;
-	unsigned short	twd;
-	unsigned short	fop;
-	int	fip;
-	int	fcs;
-	int	foo;
-	int	fos;
-	int	mxcsr;
-	int	reserved;
-	int	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
-	int	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
-	int	padding[56];
-};
-
-/* signal.h */
-#define IA32_SET_SA_HANDLER(ka,handler,restorer)				\
-				((ka)->sa.sa_handler = (__sighandler_t)		\
-					(((unsigned long)(restorer) << 32)	\
-					 | ((handler) & 0xffffffff)))
-#define IA32_SA_HANDLER(ka)	((unsigned long) (ka)->sa.sa_handler & 0xffffffff)
-#define IA32_SA_RESTORER(ka)	((unsigned long) (ka)->sa.sa_handler >> 32)
-
-#define __IA32_NR_sigreturn 119
-#define __IA32_NR_rt_sigreturn 173
-
-struct sigaction32 {
-       unsigned int sa_handler;		/* Really a pointer, but need to deal with 32 bits */
-       unsigned int sa_flags;
-       unsigned int sa_restorer;	/* Another 32 bit pointer */
-       compat_sigset_t sa_mask;		/* A 32 bit mask */
-};
-
-struct old_sigaction32 {
-       unsigned int  sa_handler;	/* Really a pointer, but need to deal
-					     with 32 bits */
-       compat_old_sigset_t sa_mask;		/* A 32 bit mask */
-       unsigned int sa_flags;
-       unsigned int sa_restorer;	/* Another 32 bit pointer */
-};
-
-typedef struct sigaltstack_ia32 {
-	unsigned int	ss_sp;
-	int		ss_flags;
-	unsigned int	ss_size;
-} stack_ia32_t;
-
-struct ucontext_ia32 {
-	unsigned int	  uc_flags;
-	unsigned int	  uc_link;
-	stack_ia32_t	  uc_stack;
-	struct sigcontext_ia32 uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char	__pad0[4];
-	unsigned int	__st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned long long	st_rdev;
-	unsigned char	__pad3[4];
-	unsigned int	st_size_lo;
-	unsigned int	st_size_hi;
-	unsigned int	st_blksize;
-	unsigned int	st_blocks;	/* Number 512-byte blocks allocated. */
-	unsigned int	__pad4;		/* future possible st_blocks high bits */
-	unsigned int	st_atime;
-	unsigned int	st_atime_nsec;
-	unsigned int	st_mtime;
-	unsigned int	st_mtime_nsec;
-	unsigned int	st_ctime;
-	unsigned int	st_ctime_nsec;
-	unsigned int	st_ino_lo;
-	unsigned int	st_ino_hi;
-};
-
-typedef struct compat_siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[((128/sizeof(int)) - 3)];
-
-		/* kill() */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			compat_timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			char _pad[sizeof(unsigned int) - sizeof(int)];
-			compat_sigval_t _sigval;	/* same as below */
-			int _sys_private;       /* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			unsigned int _pid;	/* sender's pid */
-			unsigned int _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			unsigned int _pid;	/* which child */
-			unsigned int _uid;	/* sender's uid */
-			int _status;		/* exit code */
-			compat_clock_t _utime;
-			compat_clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			unsigned int _addr;	/* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} compat_siginfo_t;
-
-/*
- * IA-32 ELF specific definitions for IA-64.
- */
-
-#define _ASM_IA64_ELF_H		/* Don't include elf.h */
-
-#include <linux/sched.h>
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_386)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_386
-
-#define IA32_STACK_TOP		IA32_PAGE_OFFSET
-#define IA32_GATE_OFFSET	IA32_PAGE_OFFSET
-#define IA32_GATE_END		IA32_PAGE_OFFSET + PAGE_SIZE
-
-/*
- * The system segments (GDT, TSS, LDT) have to be mapped below 4GB so the IA-32 engine can
- * access them.
- */
-#define IA32_GDT_OFFSET		(IA32_PAGE_OFFSET + PAGE_SIZE)
-#define IA32_TSS_OFFSET		(IA32_PAGE_OFFSET + 2*PAGE_SIZE)
-#define IA32_LDT_OFFSET		(IA32_PAGE_OFFSET + 3*PAGE_SIZE)
-
-#define ELF_EXEC_PAGESIZE	IA32_PAGE_SIZE
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed.
- * Typical use of this is to invoke "./ld.so someprog" to test out a
- * new version of the loader.  We need to make sure that it is out of
- * the way of the program that it will "exec", and that there is
- * sufficient room for the brk.
- */
-#define ELF_ET_DYN_BASE		(IA32_PAGE_OFFSET/3 + 0x1000000)
-
-void ia64_elf32_init(struct pt_regs *regs);
-#define ELF_PLAT_INIT(_r, load_addr)	ia64_elf32_init(_r)
-
-/* This macro yields a bitmask that programs can use to figure out
-   what instruction set this CPU supports.  */
-#define ELF_HWCAP	0
-
-/* This macro yields a string that ld.so will use to load
-   implementation specific libraries for optimization.  Not terribly
-   relevant until we have real hardware to play with... */
-#define ELF_PLATFORM	NULL
-
-#ifdef __KERNEL__
-# define SET_PERSONALITY(EX)				\
-	(current->personality = PER_LINUX)
-#endif
-
-#define IA32_EFLAG	0x200
-
-/*
- * IA-32 ELF specific definitions for IA-64.
- */
-
-#define __USER_CS      0x23
-#define __USER_DS      0x2B
-
-/*
- * The per-cpu GDT has 32 entries: see <asm-i386/segment.h>
- */
-#define GDT_ENTRIES 32
-
-#define GDT_SIZE	(GDT_ENTRIES * 8)
-
-#define TSS_ENTRY 14
-#define LDT_ENTRY	(TSS_ENTRY + 1)
-
-#define IA32_SEGSEL_RPL		(0x3 << 0)
-#define IA32_SEGSEL_TI		(0x1 << 2)
-#define IA32_SEGSEL_INDEX_SHIFT	3
-
-#define _TSS			((unsigned long) TSS_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
-#define _LDT			((unsigned long) LDT_ENTRY << IA32_SEGSEL_INDEX_SHIFT)
-
-#define IA32_SEG_BASE		16
-#define IA32_SEG_TYPE		40
-#define IA32_SEG_SYS		44
-#define IA32_SEG_DPL		45
-#define IA32_SEG_P		47
-#define IA32_SEG_HIGH_LIMIT	48
-#define IA32_SEG_AVL		52
-#define IA32_SEG_DB		54
-#define IA32_SEG_G		55
-#define IA32_SEG_HIGH_BASE	56
-
-#define IA32_SEG_DESCRIPTOR(base, limit, segtype, nonsysseg, dpl, segpresent, avl, segdb, gran)	\
-	       (((limit) & 0xffff)								\
-		| (((unsigned long) (base) & 0xffffff) << IA32_SEG_BASE)			\
-		| ((unsigned long) (segtype) << IA32_SEG_TYPE)					\
-		| ((unsigned long) (nonsysseg) << IA32_SEG_SYS)					\
-		| ((unsigned long) (dpl) << IA32_SEG_DPL)					\
-		| ((unsigned long) (segpresent) << IA32_SEG_P)					\
-		| ((((unsigned long) (limit) >> 16) & 0xf) << IA32_SEG_HIGH_LIMIT)		\
-		| ((unsigned long) (avl) << IA32_SEG_AVL)					\
-		| ((unsigned long) (segdb) << IA32_SEG_DB)					\
-		| ((unsigned long) (gran) << IA32_SEG_G)					\
-		| ((((unsigned long) (base) >> 24) & 0xff) << IA32_SEG_HIGH_BASE))
-
-#define SEG_LIM		32
-#define SEG_TYPE	52
-#define SEG_SYS		56
-#define SEG_DPL		57
-#define SEG_P		59
-#define SEG_AVL		60
-#define SEG_DB		62
-#define SEG_G		63
-
-/* Unscramble an IA-32 segment descriptor into the IA-64 format.  */
-#define IA32_SEG_UNSCRAMBLE(sd)									 \
-	(   (((sd) >> IA32_SEG_BASE) & 0xffffff) | ((((sd) >> IA32_SEG_HIGH_BASE) & 0xff) << 24) \
-	 | ((((sd) & 0xffff) | ((((sd) >> IA32_SEG_HIGH_LIMIT) & 0xf) << 16)) << SEG_LIM)	 \
-	 | ((((sd) >> IA32_SEG_TYPE) & 0xf) << SEG_TYPE)					 \
-	 | ((((sd) >> IA32_SEG_SYS) & 0x1) << SEG_SYS)						 \
-	 | ((((sd) >> IA32_SEG_DPL) & 0x3) << SEG_DPL)						 \
-	 | ((((sd) >> IA32_SEG_P) & 0x1) << SEG_P)						 \
-	 | ((((sd) >> IA32_SEG_AVL) & 0x1) << SEG_AVL)						 \
-	 | ((((sd) >> IA32_SEG_DB) & 0x1) << SEG_DB)						 \
-	 | ((((sd) >> IA32_SEG_G) & 0x1) << SEG_G))
-
-#define IA32_IOBASE	0x2000000000000000UL /* Virtual address for I/O space */
-
-#define IA32_CR0	0x80000001	/* Enable PG and PE bits */
-#define IA32_CR4	0x600		/* MMXEX and FXSR on */
-
-/*
- *  IA32 floating point control registers starting values
- */
-
-#define IA32_FSR_DEFAULT	0x55550000		/* set all tag bits */
-#define IA32_FCR_DEFAULT	0x17800000037fUL	/* extended precision, all masks */
-
-#define IA32_PTRACE_GETREGS	12
-#define IA32_PTRACE_SETREGS	13
-#define IA32_PTRACE_GETFPREGS	14
-#define IA32_PTRACE_SETFPREGS	15
-#define IA32_PTRACE_GETFPXREGS	18
-#define IA32_PTRACE_SETFPXREGS	19
-
-#define ia32_start_thread(regs,new_ip,new_sp) do {				\
-	set_fs(USER_DS);							\
-	ia64_psr(regs)->cpl = 3;	/* set user mode */			\
-	ia64_psr(regs)->ri = 0;		/* clear return slot number */		\
-	ia64_psr(regs)->is = 1;		/* IA-32 instruction set */		\
-	regs->cr_iip = new_ip;							\
-	regs->ar_rsc = 0xc;		/* enforced lazy mode, priv. level 3 */	\
-	regs->ar_rnat = 0;							\
-	regs->loadrs = 0;							\
-	regs->r12 = new_sp;							\
-} while (0)
-
-/*
- * Local Descriptor Table (LDT) related declarations.
- */
-
-#define IA32_LDT_ENTRIES	8192		/* Maximum number of LDT entries supported. */
-#define IA32_LDT_ENTRY_SIZE	8		/* The size of each LDT entry. */
-
-#define LDT_entry_a(info) \
-	((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info)				\
-	(((info)->base_addr & 0xff000000) |		\
-	(((info)->base_addr & 0x00ff0000) >> 16) |	\
-	((info)->limit & 0xf0000) |			\
-	(((info)->read_exec_only ^ 1) << 9) |		\
-	((info)->contents << 10) |			\
-	(((info)->seg_not_present ^ 1) << 15) |		\
-	((info)->seg_32bit << 22) |			\
-	((info)->limit_in_pages << 23) |		\
-	((info)->useable << 20) |			\
-	0x7100)
-
-#define LDT_empty(info) (			\
-	(info)->base_addr	== 0	&&	\
-	(info)->limit		== 0	&&	\
-	(info)->contents	== 0	&&	\
-	(info)->read_exec_only	== 1	&&	\
-	(info)->seg_32bit	== 0	&&	\
-	(info)->limit_in_pages	== 0	&&	\
-	(info)->seg_not_present	== 1	&&	\
-	(info)->useable		== 0	)
-
-static inline void
-load_TLS (struct thread_struct *t, unsigned int cpu)
-{
-	extern unsigned long *cpu_gdt_table[NR_CPUS];
-
-	memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0], sizeof(long));
-	memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1], sizeof(long));
-	memcpy(cpu_gdt_table[cpu] + GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2], sizeof(long));
-}
-
-struct ia32_user_desc {
-	unsigned int entry_number;
-	unsigned int base_addr;
-	unsigned int limit;
-	unsigned int seg_32bit:1;
-	unsigned int contents:2;
-	unsigned int read_exec_only:1;
-	unsigned int limit_in_pages:1;
-	unsigned int seg_not_present:1;
-	unsigned int useable:1;
-};
-
-struct linux_binprm;
-
-extern void ia32_init_addr_space (struct pt_regs *regs);
-extern int ia32_setup_arg_pages (struct linux_binprm *bprm, int exec_stack);
-extern unsigned long ia32_do_mmap (struct file *, unsigned long, unsigned long, int, int, loff_t);
-extern void ia32_load_segment_descriptors (struct task_struct *task);
-
-#define ia32f2ia64f(dst,src)			\
-do {						\
-	ia64_ldfe(6,src);			\
-	ia64_stop();				\
-	ia64_stf_spill(dst, 6);			\
-} while(0)
-
-#define ia64f2ia32f(dst,src)			\
-do {						\
-	ia64_ldf_fill(6, src);			\
-	ia64_stop();				\
-	ia64_stfe(dst, 6);			\
-} while(0)
-
-struct user_regs_struct32 {
-	__u32 ebx, ecx, edx, esi, edi, ebp, eax;
-	unsigned short ds, __ds, es, __es;
-	unsigned short fs, __fs, gs, __gs;
-	__u32 orig_eax, eip;
-	unsigned short cs, __cs;
-	__u32 eflags, esp;
-	unsigned short ss, __ss;
-};
-
-/* Prototypes for use in elfcore32.h */
-extern int save_ia32_fpstate (struct task_struct *, struct ia32_user_i387_struct __user *);
-extern int save_ia32_fpxstate (struct task_struct *, struct ia32_user_fxsr_struct __user *);
-
-#endif /* !CONFIG_IA32_SUPPORT */
-
-#endif /* _ASM_IA64_IA32_PRIV_H */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
deleted file mode 100644
index 045b746..0000000
--- a/arch/ia64/ia32/sys_ia32.c
+++ /dev/null
@@ -1,2765 +0,0 @@
-/*
- * sys_ia32.c: Conversion between 32bit and 64bit native syscalls. Derived from sys_sparc32.c.
- *
- * Copyright (C) 2000		VA Linux Co
- * Copyright (C) 2000		Don Dugger <n0ano@valinux.com>
- * Copyright (C) 1999		Arun Sharma <arun.sharma@intel.com>
- * Copyright (C) 1997,1998	Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997		David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 2000-2003, 2005 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 2004		Gordon Jin <gordon.jin@intel.com>
- *
- * These routines maintain argument size conversion between 32bit and 64bit
- * environment.
- */
-
-#include <linux/kernel.h>
-#include <linux/syscalls.h>
-#include <linux/sysctl.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/signal.h>
-#include <linux/resource.h>
-#include <linux/times.h>
-#include <linux/utsname.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/mm.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
-#include <linux/uio.h>
-#include <linux/socket.h>
-#include <linux/quota.h>
-#include <linux/poll.h>
-#include <linux/eventpoll.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/regset.h>
-#include <linux/stat.h>
-#include <linux/ipc.h>
-#include <linux/capability.h>
-#include <linux/compat.h>
-#include <linux/vfs.h>
-#include <linux/mman.h>
-#include <linux/mutex.h>
-
-#include <asm/intrinsics.h>
-#include <asm/types.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-#include "ia32priv.h"
-
-#include <net/scm.h>
-#include <net/sock.h>
-
-#define DEBUG	0
-
-#if DEBUG
-# define DBG(fmt...)	printk(KERN_DEBUG fmt)
-#else
-# define DBG(fmt...)
-#endif
-
-#define ROUND_UP(x,a)	((__typeof__(x))(((unsigned long)(x) + ((a) - 1)) & ~((a) - 1)))
-
-#define OFFSET4K(a)		((a) & 0xfff)
-#define PAGE_START(addr)	((addr) & PAGE_MASK)
-#define MINSIGSTKSZ_IA32	2048
-
-#define high2lowuid(uid) ((uid) > 65535 ? 65534 : (uid))
-#define high2lowgid(gid) ((gid) > 65535 ? 65534 : (gid))
-
-/*
- * Anything that modifies or inspects ia32 user virtual memory must hold this semaphore
- * while doing so.
- */
-/* XXX make per-mm: */
-static DEFINE_MUTEX(ia32_mmap_mutex);
-
-asmlinkage long
-sys32_execve (char __user *name, compat_uptr_t __user *argv, compat_uptr_t __user *envp,
-	      struct pt_regs *regs)
-{
-	long error;
-	char *filename;
-	unsigned long old_map_base, old_task_size, tssd;
-
-	filename = getname(name);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-
-	old_map_base  = current->thread.map_base;
-	old_task_size = current->thread.task_size;
-	tssd = ia64_get_kr(IA64_KR_TSSD);
-
-	/* we may be exec'ing a 64-bit process: reset map base, task-size, and io-base: */
-	current->thread.map_base  = DEFAULT_MAP_BASE;
-	current->thread.task_size = DEFAULT_TASK_SIZE;
-	ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
-	ia64_set_kr(IA64_KR_TSSD, current->thread.old_k1);
-
-	error = compat_do_execve(filename, argv, envp, regs);
-	putname(filename);
-
-	if (error < 0) {
-		/* oops, execve failed, switch back to old values... */
-		ia64_set_kr(IA64_KR_IO_BASE, IA32_IOBASE);
-		ia64_set_kr(IA64_KR_TSSD, tssd);
-		current->thread.map_base  = old_map_base;
-		current->thread.task_size = old_task_size;
-	}
-
-	return error;
-}
-
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-
-
-static int
-get_page_prot (struct vm_area_struct *vma, unsigned long addr)
-{
-	int prot = 0;
-
-	if (!vma || vma->vm_start > addr)
-		return 0;
-
-	if (vma->vm_flags & VM_READ)
-		prot |= PROT_READ;
-	if (vma->vm_flags & VM_WRITE)
-		prot |= PROT_WRITE;
-	if (vma->vm_flags & VM_EXEC)
-		prot |= PROT_EXEC;
-	return prot;
-}
-
-/*
- * Map a subpage by creating an anonymous page that contains the union of the old page and
- * the subpage.
- */
-static unsigned long
-mmap_subpage (struct file *file, unsigned long start, unsigned long end, int prot, int flags,
-	      loff_t off)
-{
-	void *page = NULL;
-	struct inode *inode;
-	unsigned long ret = 0;
-	struct vm_area_struct *vma = find_vma(current->mm, start);
-	int old_prot = get_page_prot(vma, start);
-
-	DBG("mmap_subpage(file=%p,start=0x%lx,end=0x%lx,prot=%x,flags=%x,off=0x%llx)\n",
-	    file, start, end, prot, flags, off);
-
-
-	/* Optimize the case where the old mmap and the new mmap are both anonymous */
-	if ((old_prot & PROT_WRITE) && (flags & MAP_ANONYMOUS) && !vma->vm_file) {
-		if (clear_user((void __user *) start, end - start)) {
-			ret = -EFAULT;
-			goto out;
-		}
-		goto skip_mmap;
-	}
-
-	page = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!page)
-		return -ENOMEM;
-
-	if (old_prot)
-		copy_from_user(page, (void __user *) PAGE_START(start), PAGE_SIZE);
-
-	down_write(&current->mm->mmap_sem);
-	{
-		ret = do_mmap(NULL, PAGE_START(start), PAGE_SIZE, prot | PROT_WRITE,
-			      flags | MAP_FIXED | MAP_ANONYMOUS, 0);
-	}
-	up_write(&current->mm->mmap_sem);
-
-	if (IS_ERR((void *) ret))
-		goto out;
-
-	if (old_prot) {
-		/* copy back the old page contents.  */
-		if (offset_in_page(start))
-			copy_to_user((void __user *) PAGE_START(start), page,
-				     offset_in_page(start));
-		if (offset_in_page(end))
-			copy_to_user((void __user *) end, page + offset_in_page(end),
-				     PAGE_SIZE - offset_in_page(end));
-	}
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		/* read the file contents */
-		inode = file->f_path.dentry->d_inode;
-		if (!inode->i_fop || !file->f_op->read
-		    || ((*file->f_op->read)(file, (char __user *) start, end - start, &off) < 0))
-		{
-			ret = -EINVAL;
-			goto out;
-		}
-	}
-
- skip_mmap:
-	if (!(prot & PROT_WRITE))
-		ret = sys_mprotect(PAGE_START(start), PAGE_SIZE, prot | old_prot);
-  out:
-	if (page)
-		free_page((unsigned long) page);
-	return ret;
-}
-
-/* SLAB cache for ia64_partial_page structures */
-struct kmem_cache *ia64_partial_page_cachep;
-
-/*
- * init ia64_partial_page_list.
- * return 0 means kmalloc fail.
- */
-struct ia64_partial_page_list*
-ia32_init_pp_list(void)
-{
-	struct ia64_partial_page_list *p;
-
-	if ((p = kmalloc(sizeof(*p), GFP_KERNEL)) == NULL)
-		return p;
-	p->pp_head = NULL;
-	p->ppl_rb = RB_ROOT;
-	p->pp_hint = NULL;
-	atomic_set(&p->pp_count, 1);
-	return p;
-}
-
-/*
- * Search for the partial page with @start in partial page list @ppl.
- * If finds the partial page, return the found partial page.
- * Else, return 0 and provide @pprev, @rb_link, @rb_parent to
- * be used by later __ia32_insert_pp().
- */
-static struct ia64_partial_page *
-__ia32_find_pp(struct ia64_partial_page_list *ppl, unsigned int start,
-	struct ia64_partial_page **pprev, struct rb_node ***rb_link,
-	struct rb_node **rb_parent)
-{
-	struct ia64_partial_page *pp;
-	struct rb_node **__rb_link, *__rb_parent, *rb_prev;
-
-	pp = ppl->pp_hint;
-	if (pp && pp->base == start)
-		return pp;
-
-	__rb_link = &ppl->ppl_rb.rb_node;
-	rb_prev = __rb_parent = NULL;
-
-	while (*__rb_link) {
-		__rb_parent = *__rb_link;
-		pp = rb_entry(__rb_parent, struct ia64_partial_page, pp_rb);
-
-		if (pp->base == start) {
-			ppl->pp_hint = pp;
-			return pp;
-		} else if (pp->base < start) {
-			rb_prev = __rb_parent;
-			__rb_link = &__rb_parent->rb_right;
-		} else {
-			__rb_link = &__rb_parent->rb_left;
-		}
-	}
-
-	*rb_link = __rb_link;
-	*rb_parent = __rb_parent;
-	*pprev = NULL;
-	if (rb_prev)
-		*pprev = rb_entry(rb_prev, struct ia64_partial_page, pp_rb);
-	return NULL;
-}
-
-/*
- * insert @pp into @ppl.
- */
-static void
-__ia32_insert_pp(struct ia64_partial_page_list *ppl,
-	struct ia64_partial_page *pp, struct ia64_partial_page *prev,
-	struct rb_node **rb_link, struct rb_node *rb_parent)
-{
-	/* link list */
-	if (prev) {
-		pp->next = prev->next;
-		prev->next = pp;
-	} else {
-		ppl->pp_head = pp;
-		if (rb_parent)
-			pp->next = rb_entry(rb_parent,
-				struct ia64_partial_page, pp_rb);
-		else
-			pp->next = NULL;
-	}
-
-	/* link rb */
-	rb_link_node(&pp->pp_rb, rb_parent, rb_link);
-	rb_insert_color(&pp->pp_rb, &ppl->ppl_rb);
-
-	ppl->pp_hint = pp;
-}
-
-/*
- * delete @pp from partial page list @ppl.
- */
-static void
-__ia32_delete_pp(struct ia64_partial_page_list *ppl,
-	struct ia64_partial_page *pp, struct ia64_partial_page *prev)
-{
-	if (prev) {
-		prev->next = pp->next;
-		if (ppl->pp_hint == pp)
-			ppl->pp_hint = prev;
-	} else {
-		ppl->pp_head = pp->next;
-		if (ppl->pp_hint == pp)
-			ppl->pp_hint = pp->next;
-	}
-	rb_erase(&pp->pp_rb, &ppl->ppl_rb);
-	kmem_cache_free(ia64_partial_page_cachep, pp);
-}
-
-static struct ia64_partial_page *
-__pp_prev(struct ia64_partial_page *pp)
-{
-	struct rb_node *prev = rb_prev(&pp->pp_rb);
-	if (prev)
-		return rb_entry(prev, struct ia64_partial_page, pp_rb);
-	else
-		return NULL;
-}
-
-/*
- * Delete partial pages with address between @start and @end.
- * @start and @end are page aligned.
- */
-static void
-__ia32_delete_pp_range(unsigned int start, unsigned int end)
-{
-	struct ia64_partial_page *pp, *prev;
-	struct rb_node **rb_link, *rb_parent;
-
-	if (start >= end)
-		return;
-
-	pp = __ia32_find_pp(current->thread.ppl, start, &prev,
-					&rb_link, &rb_parent);
-	if (pp)
-		prev = __pp_prev(pp);
-	else {
-		if (prev)
-			pp = prev->next;
-		else
-			pp = current->thread.ppl->pp_head;
-	}
-
-	while (pp && pp->base < end) {
-		struct ia64_partial_page *tmp = pp->next;
-		__ia32_delete_pp(current->thread.ppl, pp, prev);
-		pp = tmp;
-	}
-}
-
-/*
- * Set the range between @start and @end in bitmap.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- */
-static int
-__ia32_set_pp(unsigned int start, unsigned int end, int flags)
-{
-	struct ia64_partial_page *pp, *prev;
-	struct rb_node ** rb_link, *rb_parent;
-	unsigned int pstart, start_bit, end_bit, i;
-
-	pstart = PAGE_START(start);
-	start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
-	end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
-	if (end_bit == 0)
-		end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
-	pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
-					&rb_link, &rb_parent);
-	if (pp) {
-		for (i = start_bit; i < end_bit; i++)
-			set_bit(i, &pp->bitmap);
-		/*
-		 * Check: if this partial page has been set to a full page,
-		 * then delete it.
-		 */
-		if (find_first_zero_bit(&pp->bitmap, sizeof(pp->bitmap)*8) >=
-				PAGE_SIZE/IA32_PAGE_SIZE) {
-			__ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
-		}
-		return 0;
-	}
-
-	/*
-	 * MAP_FIXED may lead to overlapping mmap.
-	 * In this case, the requested mmap area may already mmaped as a full
-	 * page. So check vma before adding a new partial page.
-	 */
-	if (flags & MAP_FIXED) {
-		struct vm_area_struct *vma = find_vma(current->mm, pstart);
-		if (vma && vma->vm_start <= pstart)
-			return 0;
-	}
-
-	/* new a ia64_partial_page */
-	pp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-	pp->base = pstart;
-	pp->bitmap = 0;
-	for (i=start_bit; i<end_bit; i++)
-		set_bit(i, &(pp->bitmap));
-	pp->next = NULL;
-	__ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
-	return 0;
-}
-
-/*
- * @start and @end should be IA32 page aligned, but don't need to be in the
- * same IA64 page. Split @start and @end to make sure they're in the same IA64
- * page, then call __ia32_set_pp().
- */
-static void
-ia32_set_pp(unsigned int start, unsigned int end, int flags)
-{
-	down_write(&current->mm->mmap_sem);
-	if (flags & MAP_FIXED) {
-		/*
-		 * MAP_FIXED may lead to overlapping mmap. When this happens,
-		 * a series of complete IA64 pages results in deletion of
-		 * old partial pages in that range.
-		 */
-		__ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
-	}
-
-	if (end < PAGE_ALIGN(start)) {
-		__ia32_set_pp(start, end, flags);
-	} else {
-		if (offset_in_page(start))
-			__ia32_set_pp(start, PAGE_ALIGN(start), flags);
-		if (offset_in_page(end))
-			__ia32_set_pp(PAGE_START(end), end, flags);
-	}
-	up_write(&current->mm->mmap_sem);
-}
-
-/*
- * Unset the range between @start and @end in bitmap.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- * After doing that, if the bitmap is 0, then free the page and return 1,
- * 	else return 0;
- * If not find the partial page in the list, then
- * 	If the vma exists, then the full page is set to a partial page;
- *	Else return -ENOMEM.
- */
-static int
-__ia32_unset_pp(unsigned int start, unsigned int end)
-{
-	struct ia64_partial_page *pp, *prev;
-	struct rb_node ** rb_link, *rb_parent;
-	unsigned int pstart, start_bit, end_bit, i;
-	struct vm_area_struct *vma;
-
-	pstart = PAGE_START(start);
-	start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
-	end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
-	if (end_bit == 0)
-		end_bit = PAGE_SIZE / IA32_PAGE_SIZE;
-
-	pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
-					&rb_link, &rb_parent);
-	if (pp) {
-		for (i = start_bit; i < end_bit; i++)
-			clear_bit(i, &pp->bitmap);
-		if (pp->bitmap == 0) {
-			__ia32_delete_pp(current->thread.ppl, pp, __pp_prev(pp));
-			return 1;
-		}
-		return 0;
-	}
-
-	vma = find_vma(current->mm, pstart);
-	if (!vma || vma->vm_start > pstart) {
-		return -ENOMEM;
-	}
-
-	/* new a ia64_partial_page */
-	pp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-	pp->base = pstart;
-	pp->bitmap = 0;
-	for (i = 0; i < start_bit; i++)
-		set_bit(i, &(pp->bitmap));
-	for (i = end_bit; i < PAGE_SIZE / IA32_PAGE_SIZE; i++)
-		set_bit(i, &(pp->bitmap));
-	pp->next = NULL;
-	__ia32_insert_pp(current->thread.ppl, pp, prev, rb_link, rb_parent);
-	return 0;
-}
-
-/*
- * Delete pp between PAGE_ALIGN(start) and PAGE_START(end) by calling
- * __ia32_delete_pp_range(). Unset possible partial pages by calling
- * __ia32_unset_pp().
- * The returned value see __ia32_unset_pp().
- */
-static int
-ia32_unset_pp(unsigned int *startp, unsigned int *endp)
-{
-	unsigned int start = *startp, end = *endp;
-	int ret = 0;
-
-	down_write(&current->mm->mmap_sem);
-
-	__ia32_delete_pp_range(PAGE_ALIGN(start), PAGE_START(end));
-
-	if (end < PAGE_ALIGN(start)) {
-		ret = __ia32_unset_pp(start, end);
-		if (ret == 1) {
-			*startp = PAGE_START(start);
-			*endp = PAGE_ALIGN(end);
-		}
-		if (ret == 0) {
-			/* to shortcut sys_munmap() in sys32_munmap() */
-			*startp = PAGE_START(start);
-			*endp = PAGE_START(end);
-		}
-	} else {
-		if (offset_in_page(start)) {
-			ret = __ia32_unset_pp(start, PAGE_ALIGN(start));
-			if (ret == 1)
-				*startp = PAGE_START(start);
-			if (ret == 0)
-				*startp = PAGE_ALIGN(start);
-			if (ret < 0)
-				goto out;
-		}
-		if (offset_in_page(end)) {
-			ret = __ia32_unset_pp(PAGE_START(end), end);
-			if (ret == 1)
-				*endp = PAGE_ALIGN(end);
-			if (ret == 0)
-				*endp = PAGE_START(end);
-		}
-	}
-
- out:
-	up_write(&current->mm->mmap_sem);
-	return ret;
-}
-
-/*
- * Compare the range between @start and @end with bitmap in partial page.
- * @start and @end should be IA32 page aligned and in the same IA64 page.
- */
-static int
-__ia32_compare_pp(unsigned int start, unsigned int end)
-{
-	struct ia64_partial_page *pp, *prev;
-	struct rb_node ** rb_link, *rb_parent;
-	unsigned int pstart, start_bit, end_bit, size;
-	unsigned int first_bit, next_zero_bit;	/* the first range in bitmap */
-
-	pstart = PAGE_START(start);
-
-	pp = __ia32_find_pp(current->thread.ppl, pstart, &prev,
-					&rb_link, &rb_parent);
-	if (!pp)
-		return 1;
-
-	start_bit = (start % PAGE_SIZE) / IA32_PAGE_SIZE;
-	end_bit = (end % PAGE_SIZE) / IA32_PAGE_SIZE;
-	size = sizeof(pp->bitmap) * 8;
-	first_bit = find_first_bit(&pp->bitmap, size);
-	next_zero_bit = find_next_zero_bit(&pp->bitmap, size, first_bit);
-	if ((start_bit < first_bit) || (end_bit > next_zero_bit)) {
-		/* exceeds the first range in bitmap */
-		return -ENOMEM;
-	} else if ((start_bit == first_bit) && (end_bit == next_zero_bit)) {
-		first_bit = find_next_bit(&pp->bitmap, size, next_zero_bit);
-		if ((next_zero_bit < first_bit) && (first_bit < size))
-			return 1;	/* has next range */
-		else
-			return 0; 	/* no next range */
-	} else
-		return 1;
-}
-
-/*
- * @start and @end should be IA32 page aligned, but don't need to be in the
- * same IA64 page. Split @start and @end to make sure they're in the same IA64
- * page, then call __ia32_compare_pp().
- *
- * Take this as example: the range is the 1st and 2nd 4K page.
- * Return 0 if they fit bitmap exactly, i.e. bitmap = 00000011;
- * Return 1 if the range doesn't cover whole bitmap, e.g. bitmap = 00001111;
- * Return -ENOMEM if the range exceeds the bitmap, e.g. bitmap = 00000001 or
- * 	bitmap = 00000101.
- */
-static int
-ia32_compare_pp(unsigned int *startp, unsigned int *endp)
-{
-	unsigned int start = *startp, end = *endp;
-	int retval = 0;
-
-	down_write(&current->mm->mmap_sem);
-
-	if (end < PAGE_ALIGN(start)) {
-		retval = __ia32_compare_pp(start, end);
-		if (retval == 0) {
-			*startp = PAGE_START(start);
-			*endp = PAGE_ALIGN(end);
-		}
-	} else {
-		if (offset_in_page(start)) {
-			retval = __ia32_compare_pp(start,
-						   PAGE_ALIGN(start));
-			if (retval == 0)
-				*startp = PAGE_START(start);
-			if (retval < 0)
-				goto out;
-		}
-		if (offset_in_page(end)) {
-			retval = __ia32_compare_pp(PAGE_START(end), end);
-			if (retval == 0)
-				*endp = PAGE_ALIGN(end);
-		}
-	}
-
- out:
-	up_write(&current->mm->mmap_sem);
-	return retval;
-}
-
-static void
-__ia32_drop_pp_list(struct ia64_partial_page_list *ppl)
-{
-	struct ia64_partial_page *pp = ppl->pp_head;
-
-	while (pp) {
-		struct ia64_partial_page *next = pp->next;
-		kmem_cache_free(ia64_partial_page_cachep, pp);
-		pp = next;
-	}
-
-	kfree(ppl);
-}
-
-void
-ia32_drop_ia64_partial_page_list(struct task_struct *task)
-{
-	struct ia64_partial_page_list* ppl = task->thread.ppl;
-
-	if (ppl && atomic_dec_and_test(&ppl->pp_count))
-		__ia32_drop_pp_list(ppl);
-}
-
-/*
- * Copy current->thread.ppl to ppl (already initialized).
- */
-static int
-__ia32_copy_pp_list(struct ia64_partial_page_list *ppl)
-{
-	struct ia64_partial_page *pp, *tmp, *prev;
-	struct rb_node **rb_link, *rb_parent;
-
-	ppl->pp_head = NULL;
-	ppl->pp_hint = NULL;
-	ppl->ppl_rb = RB_ROOT;
-	rb_link = &ppl->ppl_rb.rb_node;
-	rb_parent = NULL;
-	prev = NULL;
-
-	for (pp = current->thread.ppl->pp_head; pp; pp = pp->next) {
-		tmp = kmem_cache_alloc(ia64_partial_page_cachep, GFP_KERNEL);
-		if (!tmp)
-			return -ENOMEM;
-		*tmp = *pp;
-		__ia32_insert_pp(ppl, tmp, prev, rb_link, rb_parent);
-		prev = tmp;
-		rb_link = &tmp->pp_rb.rb_right;
-		rb_parent = &tmp->pp_rb;
-	}
-	return 0;
-}
-
-int
-ia32_copy_ia64_partial_page_list(struct task_struct *p,
-				unsigned long clone_flags)
-{
-	int retval = 0;
-
-	if (clone_flags & CLONE_VM) {
-		atomic_inc(&current->thread.ppl->pp_count);
-		p->thread.ppl = current->thread.ppl;
-	} else {
-		p->thread.ppl = ia32_init_pp_list();
-		if (!p->thread.ppl)
-			return -ENOMEM;
-		down_write(&current->mm->mmap_sem);
-		{
-			retval = __ia32_copy_pp_list(p->thread.ppl);
-		}
-		up_write(&current->mm->mmap_sem);
-	}
-
-	return retval;
-}
-
-static unsigned long
-emulate_mmap (struct file *file, unsigned long start, unsigned long len, int prot, int flags,
-	      loff_t off)
-{
-	unsigned long tmp, end, pend, pstart, ret, is_congruent, fudge = 0;
-	struct inode *inode;
-	loff_t poff;
-
-	end = start + len;
-	pstart = PAGE_START(start);
-	pend = PAGE_ALIGN(end);
-
-	if (flags & MAP_FIXED) {
-		ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
-		if (start > pstart) {
-			if (flags & MAP_SHARED)
-				printk(KERN_INFO
-				       "%s(%d): emulate_mmap() can't share head (addr=0x%lx)\n",
-				       current->comm, task_pid_nr(current), start);
-			ret = mmap_subpage(file, start, min(PAGE_ALIGN(start), end), prot, flags,
-					   off);
-			if (IS_ERR((void *) ret))
-				return ret;
-			pstart += PAGE_SIZE;
-			if (pstart >= pend)
-				goto out;	/* done */
-		}
-		if (end < pend) {
-			if (flags & MAP_SHARED)
-				printk(KERN_INFO
-				       "%s(%d): emulate_mmap() can't share tail (end=0x%lx)\n",
-				       current->comm, task_pid_nr(current), end);
-			ret = mmap_subpage(file, max(start, PAGE_START(end)), end, prot, flags,
-					   (off + len) - offset_in_page(end));
-			if (IS_ERR((void *) ret))
-				return ret;
-			pend -= PAGE_SIZE;
-			if (pstart >= pend)
-				goto out;	/* done */
-		}
-	} else {
-		/*
-		 * If a start address was specified, use it if the entire rounded out area
-		 * is available.
-		 */
-		if (start && !pstart)
-			fudge = 1;	/* handle case of mapping to range (0,PAGE_SIZE) */
-		tmp = arch_get_unmapped_area(file, pstart - fudge, pend - pstart, 0, flags);
-		if (tmp != pstart) {
-			pstart = tmp;
-			start = pstart + offset_in_page(off);	/* make start congruent with off */
-			end = start + len;
-			pend = PAGE_ALIGN(end);
-		}
-	}
-
-	poff = off + (pstart - start);	/* note: (pstart - start) may be negative */
-	is_congruent = (flags & MAP_ANONYMOUS) || (offset_in_page(poff) == 0);
-
-	if ((flags & MAP_SHARED) && !is_congruent)
-		printk(KERN_INFO "%s(%d): emulate_mmap() can't share contents of incongruent mmap "
-		       "(addr=0x%lx,off=0x%llx)\n", current->comm, task_pid_nr(current), start, off);
-
-	DBG("mmap_body: mapping [0x%lx-0x%lx) %s with poff 0x%llx\n", pstart, pend,
-	    is_congruent ? "congruent" : "not congruent", poff);
-
-	down_write(&current->mm->mmap_sem);
-	{
-		if (!(flags & MAP_ANONYMOUS) && is_congruent)
-			ret = do_mmap(file, pstart, pend - pstart, prot, flags | MAP_FIXED, poff);
-		else
-			ret = do_mmap(NULL, pstart, pend - pstart,
-				      prot | ((flags & MAP_ANONYMOUS) ? 0 : PROT_WRITE),
-				      flags | MAP_FIXED | MAP_ANONYMOUS, 0);
-	}
-	up_write(&current->mm->mmap_sem);
-
-	if (IS_ERR((void *) ret))
-		return ret;
-
-	if (!is_congruent) {
-		/* read the file contents */
-		inode = file->f_path.dentry->d_inode;
-		if (!inode->i_fop || !file->f_op->read
-		    || ((*file->f_op->read)(file, (char __user *) pstart, pend - pstart, &poff)
-			< 0))
-		{
-			sys_munmap(pstart, pend - pstart);
-			return -EINVAL;
-		}
-		if (!(prot & PROT_WRITE) && sys_mprotect(pstart, pend - pstart, prot) < 0)
-			return -EINVAL;
-	}
-
-	if (!(flags & MAP_FIXED))
-		ia32_set_pp((unsigned int)start, (unsigned int)end, flags);
-out:
-	return start;
-}
-
-#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
-
-static inline unsigned int
-get_prot32 (unsigned int prot)
-{
-	if (prot & PROT_WRITE)
-		/* on x86, PROT_WRITE implies PROT_READ which implies PROT_EEC */
-		prot |= PROT_READ | PROT_WRITE | PROT_EXEC;
-	else if (prot & (PROT_READ | PROT_EXEC))
-		/* on x86, there is no distinction between PROT_READ and PROT_EXEC */
-		prot |= (PROT_READ | PROT_EXEC);
-
-	return prot;
-}
-
-unsigned long
-ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot, int flags,
-	      loff_t offset)
-{
-	DBG("ia32_do_mmap(file=%p,addr=0x%lx,len=0x%lx,prot=%x,flags=%x,offset=0x%llx)\n",
-	    file, addr, len, prot, flags, offset);
-
-	if (file && (!file->f_op || !file->f_op->mmap))
-		return -ENODEV;
-
-	len = IA32_PAGE_ALIGN(len);
-	if (len == 0)
-		return addr;
-
-	if (len > IA32_PAGE_OFFSET || addr > IA32_PAGE_OFFSET - len)
-	{
-		if (flags & MAP_FIXED)
-			return -ENOMEM;
-		else
-		return -EINVAL;
-	}
-
-	if (OFFSET4K(offset))
-		return -EINVAL;
-
-	prot = get_prot32(prot);
-
-	if (flags & MAP_HUGETLB)
-		return -ENOMEM;
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-	mutex_lock(&ia32_mmap_mutex);
-	{
-		addr = emulate_mmap(file, addr, len, prot, flags, offset);
-	}
-	mutex_unlock(&ia32_mmap_mutex);
-#else
-	down_write(&current->mm->mmap_sem);
-	{
-		addr = do_mmap(file, addr, len, prot, flags, offset);
-	}
-	up_write(&current->mm->mmap_sem);
-#endif
-	DBG("ia32_do_mmap: returning 0x%lx\n", addr);
-	return addr;
-}
-
-/*
- * Linux/i386 didn't use to be able to handle more than 4 system call parameters, so these
- * system calls used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned int addr;
-	unsigned int len;
-	unsigned int prot;
-	unsigned int flags;
-	unsigned int fd;
-	unsigned int offset;
-};
-
-asmlinkage long
-sys32_mmap (struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	struct file *file = NULL;
-	unsigned long addr;
-	int flags;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-
-	if (OFFSET4K(a.offset))
-		return -EINVAL;
-
-	flags = a.flags;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(a.fd);
-		if (!file)
-			return -EBADF;
-	}
-
-	addr = ia32_do_mmap(file, a.addr, a.len, a.prot, flags, a.offset);
-
-	if (file)
-		fput(file);
-	return addr;
-}
-
-asmlinkage long
-sys32_mmap2 (unsigned int addr, unsigned int len, unsigned int prot, unsigned int flags,
-	     unsigned int fd, unsigned int pgoff)
-{
-	struct file *file = NULL;
-	unsigned long retval;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			return -EBADF;
-	}
-
-	retval = ia32_do_mmap(file, addr, len, prot, flags,
-			      (unsigned long) pgoff << IA32_PAGE_SHIFT);
-
-	if (file)
-		fput(file);
-	return retval;
-}
-
-asmlinkage long
-sys32_munmap (unsigned int start, unsigned int len)
-{
-	unsigned int end = start + len;
-	long ret;
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
-	ret = sys_munmap(start, end - start);
-#else
-	if (OFFSET4K(start))
-		return -EINVAL;
-
-	end = IA32_PAGE_ALIGN(end);
-	if (start >= end)
-		return -EINVAL;
-
-	ret = ia32_unset_pp(&start, &end);
-	if (ret < 0)
-		return ret;
-
-	if (start >= end)
-		return 0;
-
-	mutex_lock(&ia32_mmap_mutex);
-	ret = sys_munmap(start, end - start);
-	mutex_unlock(&ia32_mmap_mutex);
-#endif
-	return ret;
-}
-
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-
-/*
- * When mprotect()ing a partial page, we set the permission to the union of the old
- * settings and the new settings.  In other words, it's only possible to make access to a
- * partial page less restrictive.
- */
-static long
-mprotect_subpage (unsigned long address, int new_prot)
-{
-	int old_prot;
-	struct vm_area_struct *vma;
-
-	if (new_prot == PROT_NONE)
-		return 0;		/* optimize case where nothing changes... */
-	vma = find_vma(current->mm, address);
-	old_prot = get_page_prot(vma, address);
-	return sys_mprotect(address, PAGE_SIZE, new_prot | old_prot);
-}
-
-#endif /* PAGE_SHIFT > IA32_PAGE_SHIFT */
-
-asmlinkage long
-sys32_mprotect (unsigned int start, unsigned int len, int prot)
-{
-	unsigned int end = start + len;
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-	long retval = 0;
-#endif
-
-	prot = get_prot32(prot);
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
-	return sys_mprotect(start, end - start, prot);
-#else
-	if (OFFSET4K(start))
-		return -EINVAL;
-
-	end = IA32_PAGE_ALIGN(end);
-	if (end < start)
-		return -EINVAL;
-
-	retval = ia32_compare_pp(&start, &end);
-
-	if (retval < 0)
-		return retval;
-
-	mutex_lock(&ia32_mmap_mutex);
-	{
-		if (offset_in_page(start)) {
-			/* start address is 4KB aligned but not page aligned. */
-			retval = mprotect_subpage(PAGE_START(start), prot);
-			if (retval < 0)
-				goto out;
-
-			start = PAGE_ALIGN(start);
-			if (start >= end)
-				goto out;	/* retval is already zero... */
-		}
-
-		if (offset_in_page(end)) {
-			/* end address is 4KB aligned but not page aligned. */
-			retval = mprotect_subpage(PAGE_START(end), prot);
-			if (retval < 0)
-				goto out;
-
-			end = PAGE_START(end);
-		}
-		retval = sys_mprotect(start, end - start, prot);
-	}
-  out:
-	mutex_unlock(&ia32_mmap_mutex);
-	return retval;
-#endif
-}
-
-asmlinkage long
-sys32_mremap (unsigned int addr, unsigned int old_len, unsigned int new_len,
-		unsigned int flags, unsigned int new_addr)
-{
-	long ret;
-
-#if PAGE_SHIFT <= IA32_PAGE_SHIFT
-	ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
-#else
-	unsigned int old_end, new_end;
-
-	if (OFFSET4K(addr))
-		return -EINVAL;
-
-	old_len = IA32_PAGE_ALIGN(old_len);
-	new_len = IA32_PAGE_ALIGN(new_len);
-	old_end = addr + old_len;
-	new_end = addr + new_len;
-
-	if (!new_len)
-		return -EINVAL;
-
-	if ((flags & MREMAP_FIXED) && (OFFSET4K(new_addr)))
-		return -EINVAL;
-
-	if (old_len >= new_len) {
-		ret = sys32_munmap(addr + new_len, old_len - new_len);
-		if (ret && old_len != new_len)
-			return ret;
-		ret = addr;
-		if (!(flags & MREMAP_FIXED) || (new_addr == addr))
-			return ret;
-		old_len = new_len;
-	}
-
-	addr = PAGE_START(addr);
-	old_len = PAGE_ALIGN(old_end) - addr;
-	new_len = PAGE_ALIGN(new_end) - addr;
-
-	mutex_lock(&ia32_mmap_mutex);
-	ret = sys_mremap(addr, old_len, new_len, flags, new_addr);
-	mutex_unlock(&ia32_mmap_mutex);
-
-	if ((ret >= 0) && (old_len < new_len)) {
-		/* mremap expanded successfully */
-		ia32_set_pp(old_end, new_end, flags);
-	}
-#endif
-	return ret;
-}
-
-asmlinkage unsigned long
-sys32_alarm (unsigned int seconds)
-{
-	return alarm_setitimer(seconds);
-}
-
-struct sel_arg_struct {
-	unsigned int n;
-	unsigned int inp;
-	unsigned int outp;
-	unsigned int exp;
-	unsigned int tvp;
-};
-
-asmlinkage long
-sys32_old_select (struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
-				 compat_ptr(a.exp), compat_ptr(a.tvp));
-}
-
-#define SEMOP		 1
-#define SEMGET		 2
-#define SEMCTL		 3
-#define SEMTIMEDOP	 4
-#define MSGSND		11
-#define MSGRCV		12
-#define MSGGET		13
-#define MSGCTL		14
-#define SHMAT		21
-#define SHMDT		22
-#define SHMGET		23
-#define SHMCTL		24
-
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
-{
-	int version;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	      case SEMTIMEDOP:
-		if (fifth)
-			return compat_sys_semtimedop(first, compat_ptr(ptr),
-				second, compat_ptr(fifth));
-		/* else fall through for normal semop() */
-	      case SEMOP:
-		/* struct sembuf is the same on 32 and 64bit :)) */
-		return sys_semtimedop(first, compat_ptr(ptr), second,
-				      NULL);
-	      case SEMGET:
-		return sys_semget(first, second, third);
-	      case SEMCTL:
-		return compat_sys_semctl(first, second, third, compat_ptr(ptr));
-
-	      case MSGSND:
-		return compat_sys_msgsnd(first, second, third, compat_ptr(ptr));
-	      case MSGRCV:
-		return compat_sys_msgrcv(first, second, fifth, third, version, compat_ptr(ptr));
-	      case MSGGET:
-		return sys_msgget((key_t) first, second);
-	      case MSGCTL:
-		return compat_sys_msgctl(first, second, compat_ptr(ptr));
-
-	      case SHMAT:
-		return compat_sys_shmat(first, second, third, version, compat_ptr(ptr));
-		break;
-	      case SHMDT:
-		return sys_shmdt(compat_ptr(ptr));
-	      case SHMGET:
-		return sys_shmget(first, (unsigned)second, third);
-	      case SHMCTL:
-		return compat_sys_shmctl(first, second, compat_ptr(ptr));
-
-	      default:
-		return -ENOSYS;
-	}
-	return -EINVAL;
-}
-
-asmlinkage long
-compat_sys_wait4 (compat_pid_t pid, compat_uint_t * stat_addr, int options,
-		 struct compat_rusage *ru);
-
-asmlinkage long
-sys32_waitpid (int pid, unsigned int *stat_addr, int options)
-{
-	return compat_sys_wait4(pid, stat_addr, options, NULL);
-}
-
-/*
- *  The order in which registers are stored in the ptrace regs structure
- */
-#define PT_EBX	0
-#define PT_ECX	1
-#define PT_EDX	2
-#define PT_ESI	3
-#define PT_EDI	4
-#define PT_EBP	5
-#define PT_EAX	6
-#define PT_DS	7
-#define PT_ES	8
-#define PT_FS	9
-#define PT_GS	10
-#define PT_ORIG_EAX 11
-#define PT_EIP	12
-#define PT_CS	13
-#define PT_EFL	14
-#define PT_UESP	15
-#define PT_SS	16
-
-static unsigned int
-getreg (struct task_struct *child, int regno)
-{
-	struct pt_regs *child_regs;
-
-	child_regs = task_pt_regs(child);
-	switch (regno / sizeof(int)) {
-	      case PT_EBX: return child_regs->r11;
-	      case PT_ECX: return child_regs->r9;
-	      case PT_EDX: return child_regs->r10;
-	      case PT_ESI: return child_regs->r14;
-	      case PT_EDI: return child_regs->r15;
-	      case PT_EBP: return child_regs->r13;
-	      case PT_EAX: return child_regs->r8;
-	      case PT_ORIG_EAX: return child_regs->r1; /* see dispatch_to_ia32_handler() */
-	      case PT_EIP: return child_regs->cr_iip;
-	      case PT_UESP: return child_regs->r12;
-	      case PT_EFL: return child->thread.eflag;
-	      case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
-		return __USER_DS;
-	      case PT_CS: return __USER_CS;
-	      default:
-		printk(KERN_ERR "ia32.getreg(): unknown register %d\n", regno);
-		break;
-	}
-	return 0;
-}
-
-static void
-putreg (struct task_struct *child, int regno, unsigned int value)
-{
-	struct pt_regs *child_regs;
-
-	child_regs = task_pt_regs(child);
-	switch (regno / sizeof(int)) {
-	      case PT_EBX: child_regs->r11 = value; break;
-	      case PT_ECX: child_regs->r9 = value; break;
-	      case PT_EDX: child_regs->r10 = value; break;
-	      case PT_ESI: child_regs->r14 = value; break;
-	      case PT_EDI: child_regs->r15 = value; break;
-	      case PT_EBP: child_regs->r13 = value; break;
-	      case PT_EAX: child_regs->r8 = value; break;
-	      case PT_ORIG_EAX: child_regs->r1 = value; break;
-	      case PT_EIP: child_regs->cr_iip = value; break;
-	      case PT_UESP: child_regs->r12 = value; break;
-	      case PT_EFL: child->thread.eflag = value; break;
-	      case PT_DS: case PT_ES: case PT_FS: case PT_GS: case PT_SS:
-		if (value != __USER_DS)
-			printk(KERN_ERR
-			       "ia32.putreg: attempt to set invalid segment register %d = %x\n",
-			       regno, value);
-		break;
-	      case PT_CS:
-		if (value != __USER_CS)
-			printk(KERN_ERR
-			       "ia32.putreg: attempt to set invalid segment register %d = %x\n",
-			       regno, value);
-		break;
-	      default:
-		printk(KERN_ERR "ia32.putreg: unknown register %d\n", regno);
-		break;
-	}
-}
-
-static void
-put_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
-	   struct switch_stack *swp, int tos)
-{
-	struct _fpreg_ia32 *f;
-	char buf[32];
-
-	f = (struct _fpreg_ia32 *)(((unsigned long)buf + 15) & ~15);
-	if ((regno += tos) >= 8)
-		regno -= 8;
-	switch (regno) {
-	      case 0:
-		ia64f2ia32f(f, &ptp->f8);
-		break;
-	      case 1:
-		ia64f2ia32f(f, &ptp->f9);
-		break;
-	      case 2:
-		ia64f2ia32f(f, &ptp->f10);
-		break;
-	      case 3:
-		ia64f2ia32f(f, &ptp->f11);
-		break;
-	      case 4:
-	      case 5:
-	      case 6:
-	      case 7:
-		ia64f2ia32f(f, &swp->f12 + (regno - 4));
-		break;
-	}
-	copy_to_user(reg, f, sizeof(*reg));
-}
-
-static void
-get_fpreg (int regno, struct _fpreg_ia32 __user *reg, struct pt_regs *ptp,
-	   struct switch_stack *swp, int tos)
-{
-
-	if ((regno += tos) >= 8)
-		regno -= 8;
-	switch (regno) {
-	      case 0:
-		copy_from_user(&ptp->f8, reg, sizeof(*reg));
-		break;
-	      case 1:
-		copy_from_user(&ptp->f9, reg, sizeof(*reg));
-		break;
-	      case 2:
-		copy_from_user(&ptp->f10, reg, sizeof(*reg));
-		break;
-	      case 3:
-		copy_from_user(&ptp->f11, reg, sizeof(*reg));
-		break;
-	      case 4:
-	      case 5:
-	      case 6:
-	      case 7:
-		copy_from_user(&swp->f12 + (regno - 4), reg, sizeof(*reg));
-		break;
-	}
-	return;
-}
-
-int
-save_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
-{
-	struct switch_stack *swp;
-	struct pt_regs *ptp;
-	int i, tos;
-
-	if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
-		return -EFAULT;
-
-	__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
-	__put_user(tsk->thread.fsr & 0xffff, &save->swd);
-	__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
-	__put_user(tsk->thread.fir, &save->fip);
-	__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
-	__put_user(tsk->thread.fdr, &save->foo);
-	__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
-
-	/*
-	 *  Stack frames start with 16-bytes of temp space
-	 */
-	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
-	ptp = task_pt_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 7;
-	for (i = 0; i < 8; i++)
-		put_fpreg(i, &save->st_space[i], ptp, swp, tos);
-	return 0;
-}
-
-static int
-restore_ia32_fpstate (struct task_struct *tsk, struct ia32_user_i387_struct __user *save)
-{
-	struct switch_stack *swp;
-	struct pt_regs *ptp;
-	int i, tos;
-	unsigned int fsrlo, fsrhi, num32;
-
-	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
-		return(-EFAULT);
-
-	__get_user(num32, (unsigned int __user *)&save->cwd);
-	tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
-	__get_user(fsrlo, (unsigned int __user *)&save->swd);
-	__get_user(fsrhi, (unsigned int __user *)&save->twd);
-	num32 = (fsrhi << 16) | fsrlo;
-	tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
-	__get_user(num32, (unsigned int __user *)&save->fip);
-	tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
-	__get_user(num32, (unsigned int __user *)&save->foo);
-	tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
-
-	/*
-	 *  Stack frames start with 16-bytes of temp space
-	 */
-	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
-	ptp = task_pt_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 7;
-	for (i = 0; i < 8; i++)
-		get_fpreg(i, &save->st_space[i], ptp, swp, tos);
-	return 0;
-}
-
-int
-save_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
-{
-	struct switch_stack *swp;
-	struct pt_regs *ptp;
-	int i, tos;
-	unsigned long mxcsr=0;
-	unsigned long num128[2];
-
-	if (!access_ok(VERIFY_WRITE, save, sizeof(*save)))
-		return -EFAULT;
-
-	__put_user(tsk->thread.fcr & 0xffff, &save->cwd);
-	__put_user(tsk->thread.fsr & 0xffff, &save->swd);
-	__put_user((tsk->thread.fsr>>16) & 0xffff, &save->twd);
-	__put_user(tsk->thread.fir, &save->fip);
-	__put_user((tsk->thread.fir>>32) & 0xffff, &save->fcs);
-	__put_user(tsk->thread.fdr, &save->foo);
-	__put_user((tsk->thread.fdr>>32) & 0xffff, &save->fos);
-
-        /*
-         *  Stack frames start with 16-bytes of temp space
-         */
-        swp = (struct switch_stack *)(tsk->thread.ksp + 16);
-        ptp = task_pt_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 7;
-        for (i = 0; i < 8; i++)
-		put_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
-
-	mxcsr = ((tsk->thread.fcr>>32) & 0xff80) | ((tsk->thread.fsr>>32) & 0x3f);
-	__put_user(mxcsr & 0xffff, &save->mxcsr);
-	for (i = 0; i < 8; i++) {
-		memcpy(&(num128[0]), &(swp->f16) + i*2, sizeof(unsigned long));
-		memcpy(&(num128[1]), &(swp->f17) + i*2, sizeof(unsigned long));
-		copy_to_user(&save->xmm_space[0] + 4*i, num128, sizeof(struct _xmmreg_ia32));
-	}
-	return 0;
-}
-
-static int
-restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __user *save)
-{
-	struct switch_stack *swp;
-	struct pt_regs *ptp;
-	int i, tos;
-	unsigned int fsrlo, fsrhi, num32;
-	int mxcsr;
-	unsigned long num64;
-	unsigned long num128[2];
-
-	if (!access_ok(VERIFY_READ, save, sizeof(*save)))
-		return(-EFAULT);
-
-	__get_user(num32, (unsigned int __user *)&save->cwd);
-	tsk->thread.fcr = (tsk->thread.fcr & (~0x1f3f)) | (num32 & 0x1f3f);
-	__get_user(fsrlo, (unsigned int __user *)&save->swd);
-	__get_user(fsrhi, (unsigned int __user *)&save->twd);
-	num32 = (fsrhi << 16) | fsrlo;
-	tsk->thread.fsr = (tsk->thread.fsr & (~0xffffffff)) | num32;
-	__get_user(num32, (unsigned int __user *)&save->fip);
-	tsk->thread.fir = (tsk->thread.fir & (~0xffffffff)) | num32;
-	__get_user(num32, (unsigned int __user *)&save->foo);
-	tsk->thread.fdr = (tsk->thread.fdr & (~0xffffffff)) | num32;
-
-	/*
-	 *  Stack frames start with 16-bytes of temp space
-	 */
-	swp = (struct switch_stack *)(tsk->thread.ksp + 16);
-	ptp = task_pt_regs(tsk);
-	tos = (tsk->thread.fsr >> 11) & 7;
-	for (i = 0; i < 8; i++)
-	get_fpreg(i, (struct _fpreg_ia32 __user *)&save->st_space[4*i], ptp, swp, tos);
-
-	__get_user(mxcsr, (unsigned int __user *)&save->mxcsr);
-	num64 = mxcsr & 0xff10;
-	tsk->thread.fcr = (tsk->thread.fcr & (~0xff1000000000UL)) | (num64<<32);
-	num64 = mxcsr & 0x3f;
-	tsk->thread.fsr = (tsk->thread.fsr & (~0x3f00000000UL)) | (num64<<32);
-
-	for (i = 0; i < 8; i++) {
-		copy_from_user(num128, &save->xmm_space[0] + 4*i, sizeof(struct _xmmreg_ia32));
-		memcpy(&(swp->f16) + i*2, &(num128[0]), sizeof(unsigned long));
-		memcpy(&(swp->f17) + i*2, &(num128[1]), sizeof(unsigned long));
-	}
-	return 0;
-}
-
-long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
-	compat_ulong_t caddr, compat_ulong_t cdata)
-{
-	unsigned long addr = caddr;
-	unsigned long data = cdata;
-	unsigned int tmp;
-	long i, ret;
-
-	switch (request) {
-	      case PTRACE_PEEKUSR:	/* read word at addr in USER area */
-		ret = -EIO;
-		if ((addr & 3) || addr > 17*sizeof(int))
-			break;
-
-		tmp = getreg(child, addr);
-		if (!put_user(tmp, (unsigned int __user *) compat_ptr(data)))
-			ret = 0;
-		break;
-
-	      case PTRACE_POKEUSR:	/* write word at addr in USER area */
-		ret = -EIO;
-		if ((addr & 3) || addr > 17*sizeof(int))
-			break;
-
-		putreg(child, addr, data);
-		ret = 0;
-		break;
-
-	      case IA32_PTRACE_GETREGS:
-		if (!access_ok(VERIFY_WRITE, compat_ptr(data), 17*sizeof(int))) {
-			ret = -EIO;
-			break;
-		}
-		for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
-			put_user(getreg(child, i), (unsigned int __user *) compat_ptr(data));
-			data += sizeof(int);
-		}
-		ret = 0;
-		break;
-
-	      case IA32_PTRACE_SETREGS:
-		if (!access_ok(VERIFY_READ, compat_ptr(data), 17*sizeof(int))) {
-			ret = -EIO;
-			break;
-		}
-		for (i = 0; i < (int) (17*sizeof(int)); i += sizeof(int) ) {
-			get_user(tmp, (unsigned int __user *) compat_ptr(data));
-			putreg(child, i, tmp);
-			data += sizeof(int);
-		}
-		ret = 0;
-		break;
-
-	      case IA32_PTRACE_GETFPREGS:
-		ret = save_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
-					compat_ptr(data));
-		break;
-
-	      case IA32_PTRACE_GETFPXREGS:
-		ret = save_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
-					 compat_ptr(data));
-		break;
-
-	      case IA32_PTRACE_SETFPREGS:
-		ret = restore_ia32_fpstate(child, (struct ia32_user_i387_struct __user *)
-					   compat_ptr(data));
-		break;
-
-	      case IA32_PTRACE_SETFPXREGS:
-		ret = restore_ia32_fpxstate(child, (struct ia32_user_fxsr_struct __user *)
-					    compat_ptr(data));
-		break;
-
-	      default:
-		return compat_ptrace_request(child, request, caddr, cdata);
-	}
-	return ret;
-}
-
-typedef struct {
-	unsigned int	ss_sp;
-	unsigned int	ss_flags;
-	unsigned int	ss_size;
-} ia32_stack_t;
-
-asmlinkage long
-sys32_sigaltstack (ia32_stack_t __user *uss32, ia32_stack_t __user *uoss32,
-		   long arg2, long arg3, long arg4, long arg5, long arg6,
-		   long arg7, struct pt_regs pt)
-{
-	stack_t uss, uoss;
-	ia32_stack_t buf32;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-
-	if (uss32) {
-		if (copy_from_user(&buf32, uss32, sizeof(ia32_stack_t)))
-			return -EFAULT;
-		uss.ss_sp = (void __user *) (long) buf32.ss_sp;
-		uss.ss_flags = buf32.ss_flags;
-		/* MINSIGSTKSZ is different for ia32 vs ia64. We lie here to pass the
-	           check and set it to the user requested value later */
-		if ((buf32.ss_flags != SS_DISABLE) && (buf32.ss_size < MINSIGSTKSZ_IA32)) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		uss.ss_size = MINSIGSTKSZ;
-	}
-	set_fs(KERNEL_DS);
-	ret = do_sigaltstack(uss32 ? (stack_t __user *) &uss : NULL,
-			     (stack_t __user *) &uoss, pt.r12);
- 	current->sas_ss_size = buf32.ss_size;
-	set_fs(old_fs);
-out:
-	if (ret < 0)
-		return(ret);
-	if (uoss32) {
-		buf32.ss_sp = (long __user) uoss.ss_sp;
-		buf32.ss_flags = uoss.ss_flags;
-		buf32.ss_size = uoss.ss_size;
-		if (copy_to_user(uoss32, &buf32, sizeof(ia32_stack_t)))
-			return -EFAULT;
-	}
-	return ret;
-}
-
-asmlinkage int
-sys32_msync (unsigned int start, unsigned int len, int flags)
-{
-	unsigned int addr;
-
-	if (OFFSET4K(start))
-		return -EINVAL;
-	addr = PAGE_START(start);
-	return sys_msync(addr, len + (start - addr), flags);
-}
-
-asmlinkage long
-sys32_newuname (struct new_utsname __user *name)
-{
-	int ret = sys_newuname(name);
-
-	if (!ret)
-		if (copy_to_user(name->machine, "i686\0\0\0", 8))
-			ret = -EFAULT;
-	return ret;
-}
-
-asmlinkage long
-sys32_getresuid16 (u16 __user *ruid, u16 __user *euid, u16 __user *suid)
-{
-	uid_t a, b, c;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-	ret = sys_getresuid((uid_t __user *) &a, (uid_t __user *) &b, (uid_t __user *) &c);
-	set_fs(old_fs);
-
-	if (put_user(a, ruid) || put_user(b, euid) || put_user(c, suid))
-		return -EFAULT;
-	return ret;
-}
-
-asmlinkage long
-sys32_getresgid16 (u16 __user *rgid, u16 __user *egid, u16 __user *sgid)
-{
-	gid_t a, b, c;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-	ret = sys_getresgid((gid_t __user *) &a, (gid_t __user *) &b, (gid_t __user *) &c);
-	set_fs(old_fs);
-
-	if (ret)
-		return ret;
-
-	return put_user(a, rgid) | put_user(b, egid) | put_user(c, sgid);
-}
-
-asmlinkage long
-sys32_lseek (unsigned int fd, int offset, unsigned int whence)
-{
-	/* Sign-extension of "offset" is important here... */
-	return sys_lseek(fd, offset, whence);
-}
-
-static int
-groups16_to_user(short __user *grouplist, struct group_info *group_info)
-{
-	int i;
-	short group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		group = (short)GROUP_AT(group_info, i);
-		if (put_user(group, grouplist+i))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int
-groups16_from_user(struct group_info *group_info, short __user *grouplist)
-{
-	int i;
-	short group;
-
-	for (i = 0; i < group_info->ngroups; i++) {
-		if (get_user(group, grouplist+i))
-			return  -EFAULT;
-		GROUP_AT(group_info, i) = (gid_t)group;
-	}
-
-	return 0;
-}
-
-asmlinkage long
-sys32_getgroups16 (int gidsetsize, short __user *grouplist)
-{
-	const struct cred *cred = current_cred();
-	int i;
-
-	if (gidsetsize < 0)
-		return -EINVAL;
-
-	i = cred->group_info->ngroups;
-	if (gidsetsize) {
-		if (i > gidsetsize) {
-			i = -EINVAL;
-			goto out;
-		}
-		if (groups16_to_user(grouplist, cred->group_info)) {
-			i = -EFAULT;
-			goto out;
-		}
-	}
-out:
-	return i;
-}
-
-asmlinkage long
-sys32_setgroups16 (int gidsetsize, short __user *grouplist)
-{
-	struct group_info *group_info;
-	int retval;
-
-	if (!capable(CAP_SETGID))
-		return -EPERM;
-	if ((unsigned)gidsetsize > NGROUPS_MAX)
-		return -EINVAL;
-
-	group_info = groups_alloc(gidsetsize);
-	if (!group_info)
-		return -ENOMEM;
-	retval = groups16_from_user(group_info, grouplist);
-	if (retval) {
-		put_group_info(group_info);
-		return retval;
-	}
-
-	retval = set_current_groups(group_info);
-	put_group_info(group_info);
-
-	return retval;
-}
-
-asmlinkage long
-sys32_truncate64 (unsigned int path, unsigned int len_lo, unsigned int len_hi)
-{
-	return sys_truncate(compat_ptr(path), ((unsigned long) len_hi << 32) | len_lo);
-}
-
-asmlinkage long
-sys32_ftruncate64 (int fd, unsigned int len_lo, unsigned int len_hi)
-{
-	return sys_ftruncate(fd, ((unsigned long) len_hi << 32) | len_lo);
-}
-
-static int
-putstat64 (struct stat64 __user *ubuf, struct kstat *kbuf)
-{
-	int err;
-	u64 hdev;
-
-	if (clear_user(ubuf, sizeof(*ubuf)))
-		return -EFAULT;
-
-	hdev = huge_encode_dev(kbuf->dev);
-	err  = __put_user(hdev, (u32 __user*)&ubuf->st_dev);
-	err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_dev) + 1);
-	err |= __put_user(kbuf->ino, &ubuf->__st_ino);
-	err |= __put_user(kbuf->ino, &ubuf->st_ino_lo);
-	err |= __put_user(kbuf->ino >> 32, &ubuf->st_ino_hi);
-	err |= __put_user(kbuf->mode, &ubuf->st_mode);
-	err |= __put_user(kbuf->nlink, &ubuf->st_nlink);
-	err |= __put_user(kbuf->uid, &ubuf->st_uid);
-	err |= __put_user(kbuf->gid, &ubuf->st_gid);
-	hdev = huge_encode_dev(kbuf->rdev);
-	err  = __put_user(hdev, (u32 __user*)&ubuf->st_rdev);
-	err |= __put_user(hdev >> 32, ((u32 __user*)&ubuf->st_rdev) + 1);
-	err |= __put_user(kbuf->size, &ubuf->st_size_lo);
-	err |= __put_user((kbuf->size >> 32), &ubuf->st_size_hi);
-	err |= __put_user(kbuf->atime.tv_sec, &ubuf->st_atime);
-	err |= __put_user(kbuf->atime.tv_nsec, &ubuf->st_atime_nsec);
-	err |= __put_user(kbuf->mtime.tv_sec, &ubuf->st_mtime);
-	err |= __put_user(kbuf->mtime.tv_nsec, &ubuf->st_mtime_nsec);
-	err |= __put_user(kbuf->ctime.tv_sec, &ubuf->st_ctime);
-	err |= __put_user(kbuf->ctime.tv_nsec, &ubuf->st_ctime_nsec);
-	err |= __put_user(kbuf->blksize, &ubuf->st_blksize);
-	err |= __put_user(kbuf->blocks, &ubuf->st_blocks);
-	return err;
-}
-
-asmlinkage long
-sys32_stat64 (char __user *filename, struct stat64 __user *statbuf)
-{
-	struct kstat s;
-	long ret = vfs_stat(filename, &s);
-	if (!ret)
-		ret = putstat64(statbuf, &s);
-	return ret;
-}
-
-asmlinkage long
-sys32_lstat64 (char __user *filename, struct stat64 __user *statbuf)
-{
-	struct kstat s;
-	long ret = vfs_lstat(filename, &s);
-	if (!ret)
-		ret = putstat64(statbuf, &s);
-	return ret;
-}
-
-asmlinkage long
-sys32_fstat64 (unsigned int fd, struct stat64 __user *statbuf)
-{
-	struct kstat s;
-	long ret = vfs_fstat(fd, &s);
-	if (!ret)
-		ret = putstat64(statbuf, &s);
-	return ret;
-}
-
-asmlinkage long
-sys32_sched_rr_get_interval (pid_t pid, struct compat_timespec __user *interval)
-{
-	mm_segment_t old_fs = get_fs();
-	struct timespec t;
-	long ret;
-
-	set_fs(KERNEL_DS);
-	ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
-	set_fs(old_fs);
-	if (put_compat_timespec(&t, interval))
-		return -EFAULT;
-	return ret;
-}
-
-asmlinkage long
-sys32_pread (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
-{
-	return sys_pread64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
-}
-
-asmlinkage long
-sys32_pwrite (unsigned int fd, void __user *buf, unsigned int count, u32 pos_lo, u32 pos_hi)
-{
-	return sys_pwrite64(fd, buf, count, ((unsigned long) pos_hi << 32) | pos_lo);
-}
-
-asmlinkage long
-sys32_sendfile (int out_fd, int in_fd, int __user *offset, unsigned int count)
-{
-	mm_segment_t old_fs = get_fs();
-	long ret;
-	off_t of;
-
-	if (offset && get_user(of, offset))
-		return -EFAULT;
-
-	set_fs(KERNEL_DS);
-	ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *) &of : NULL, count);
-	set_fs(old_fs);
-
-	if (offset && put_user(of, offset))
-		return -EFAULT;
-
-	return ret;
-}
-
-asmlinkage long
-sys32_personality (unsigned int personality)
-{
-	long ret;
-
-	if (current->personality == PER_LINUX32 && personality == PER_LINUX)
-		personality = PER_LINUX32;
-	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
-	return ret;
-}
-
-asmlinkage unsigned long
-sys32_brk (unsigned int brk)
-{
-	unsigned long ret, obrk;
-	struct mm_struct *mm = current->mm;
-
-	obrk = mm->brk;
-	ret = sys_brk(brk);
-	if (ret < obrk)
-		clear_user(compat_ptr(ret), PAGE_ALIGN(ret) - ret);
-	return ret;
-}
-
-/* Structure for ia32 emulation on ia64 */
-struct epoll_event32
-{
-	u32 events;
-	u32 data[2];
-};
-
-asmlinkage long
-sys32_epoll_ctl(int epfd, int op, int fd, struct epoll_event32 __user *event)
-{
-	mm_segment_t old_fs = get_fs();
-	struct epoll_event event64;
-	int error;
-	u32 data_halfword;
-
-	if (!access_ok(VERIFY_READ, event, sizeof(struct epoll_event32)))
-		return -EFAULT;
-
-	__get_user(event64.events, &event->events);
-	__get_user(data_halfword, &event->data[0]);
-	event64.data = data_halfword;
-	__get_user(data_halfword, &event->data[1]);
- 	event64.data |= (u64)data_halfword << 32;
-
-	set_fs(KERNEL_DS);
-	error = sys_epoll_ctl(epfd, op, fd, (struct epoll_event __user *) &event64);
-	set_fs(old_fs);
-
-	return error;
-}
-
-asmlinkage long
-sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents,
-		 int timeout)
-{
-	struct epoll_event *events64 = NULL;
-	mm_segment_t old_fs = get_fs();
-	int numevents, size;
-	int evt_idx;
-	int do_free_pages = 0;
-
-	if (maxevents <= 0) {
-		return -EINVAL;
-	}
-
-	/* Verify that the area passed by the user is writeable */
-	if (!access_ok(VERIFY_WRITE, events, maxevents * sizeof(struct epoll_event32)))
-		return -EFAULT;
-
-	/*
- 	 * Allocate space for the intermediate copy.  If the space needed
-	 * is large enough to cause kmalloc to fail, then try again with
-	 * __get_free_pages.
-	 */
-	size = maxevents * sizeof(struct epoll_event);
-	events64 = kmalloc(size, GFP_KERNEL);
-	if (events64 == NULL) {
-		events64 = (struct epoll_event *)
-				__get_free_pages(GFP_KERNEL, get_order(size));
-		if (events64 == NULL)
-			return -ENOMEM;
-		do_free_pages = 1;
-	}
-
-	/* Do the system call */
-	set_fs(KERNEL_DS); /* copy_to/from_user should work on kernel mem*/
-	numevents = sys_epoll_wait(epfd, (struct epoll_event __user *) events64,
-				   maxevents, timeout);
-	set_fs(old_fs);
-
-	/* Don't modify userspace memory if we're returning an error */
-	if (numevents > 0) {
-		/* Translate the 64-bit structures back into the 32-bit
-		   structures */
-		for (evt_idx = 0; evt_idx < numevents; evt_idx++) {
-			__put_user(events64[evt_idx].events,
-				   &events[evt_idx].events);
-			__put_user((u32)events64[evt_idx].data,
-				   &events[evt_idx].data[0]);
-			__put_user((u32)(events64[evt_idx].data >> 32),
-				   &events[evt_idx].data[1]);
-		}
-	}
-
-	if (do_free_pages)
-		free_pages((unsigned long) events64, get_order(size));
-	else
-		kfree(events64);
-	return numevents;
-}
-
-/*
- * Get a yet unused TLS descriptor index.
- */
-static int
-get_free_idx (void)
-{
-	struct thread_struct *t = &current->thread;
-	int idx;
-
-	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
-		if (desc_empty(t->tls_array + idx))
-			return idx + GDT_ENTRY_TLS_MIN;
-	return -ESRCH;
-}
-
-static void set_tls_desc(struct task_struct *p, int idx,
-		const struct ia32_user_desc *info, int n)
-{
-	struct thread_struct *t = &p->thread;
-	struct desc_struct *desc = &t->tls_array[idx - GDT_ENTRY_TLS_MIN];
-	int cpu;
-
-	/*
-	 * We must not get preempted while modifying the TLS.
-	 */
-	cpu = get_cpu();
-
-	while (n-- > 0) {
-		if (LDT_empty(info)) {
-			desc->a = 0;
-			desc->b = 0;
-		} else {
-			desc->a = LDT_entry_a(info);
-			desc->b = LDT_entry_b(info);
-		}
-
-		++info;
-		++desc;
-	}
-
-	if (t == &current->thread)
-		load_TLS(t, cpu);
-
-	put_cpu();
-}
-
-/*
- * Set a given TLS descriptor:
- */
-asmlinkage int
-sys32_set_thread_area (struct ia32_user_desc __user *u_info)
-{
-	struct ia32_user_desc info;
-	int idx;
-
-	if (copy_from_user(&info, u_info, sizeof(info)))
-		return -EFAULT;
-	idx = info.entry_number;
-
-	/*
-	 * index -1 means the kernel should try to find and allocate an empty descriptor:
-	 */
-	if (idx == -1) {
-		idx = get_free_idx();
-		if (idx < 0)
-			return idx;
-		if (put_user(idx, &u_info->entry_number))
-			return -EFAULT;
-	}
-
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-
-	set_tls_desc(current, idx, &info, 1);
-	return 0;
-}
-
-/*
- * Get the current Thread-Local Storage area:
- */
-
-#define GET_BASE(desc) (			\
-	(((desc)->a >> 16) & 0x0000ffff) |	\
-	(((desc)->b << 16) & 0x00ff0000) |	\
-	( (desc)->b        & 0xff000000)   )
-
-#define GET_LIMIT(desc) (			\
-	((desc)->a & 0x0ffff) |			\
-	 ((desc)->b & 0xf0000) )
-
-#define GET_32BIT(desc)		(((desc)->b >> 22) & 1)
-#define GET_CONTENTS(desc)	(((desc)->b >> 10) & 3)
-#define GET_WRITABLE(desc)	(((desc)->b >>  9) & 1)
-#define GET_LIMIT_PAGES(desc)	(((desc)->b >> 23) & 1)
-#define GET_PRESENT(desc)	(((desc)->b >> 15) & 1)
-#define GET_USEABLE(desc)	(((desc)->b >> 20) & 1)
-
-static void fill_user_desc(struct ia32_user_desc *info, int idx,
-		const struct desc_struct *desc)
-{
-	info->entry_number = idx;
-	info->base_addr = GET_BASE(desc);
-	info->limit = GET_LIMIT(desc);
-	info->seg_32bit = GET_32BIT(desc);
-	info->contents = GET_CONTENTS(desc);
-	info->read_exec_only = !GET_WRITABLE(desc);
-	info->limit_in_pages = GET_LIMIT_PAGES(desc);
-	info->seg_not_present = !GET_PRESENT(desc);
-	info->useable = GET_USEABLE(desc);
-}
-
-asmlinkage int
-sys32_get_thread_area (struct ia32_user_desc __user *u_info)
-{
-	struct ia32_user_desc info;
-	struct desc_struct *desc;
-	int idx;
-
-	if (get_user(idx, &u_info->entry_number))
-		return -EFAULT;
-	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
-		return -EINVAL;
-
-	desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
-	fill_user_desc(&info, idx, desc);
-
-	if (copy_to_user(u_info, &info, sizeof(info)))
-		return -EFAULT;
-	return 0;
-}
-
-struct regset_get {
-	void *kbuf;
-	void __user *ubuf;
-};
-
-struct regset_set {
-	const void *kbuf;
-	const void __user *ubuf;
-};
-
-struct regset_getset {
-	struct task_struct *target;
-	const struct user_regset *regset;
-	union {
-		struct regset_get get;
-		struct regset_set set;
-	} u;
-	unsigned int pos;
-	unsigned int count;
-	int ret;
-};
-
-static void getfpreg(struct task_struct *task, int regno, int *val)
-{
-	switch (regno / sizeof(int)) {
-	case 0:
-		*val = task->thread.fcr & 0xffff;
-		break;
-	case 1:
-		*val = task->thread.fsr & 0xffff;
-		break;
-	case 2:
-		*val = (task->thread.fsr>>16) & 0xffff;
-		break;
-	case 3:
-		*val = task->thread.fir;
-		break;
-	case 4:
-		*val = (task->thread.fir>>32) & 0xffff;
-		break;
-	case 5:
-		*val = task->thread.fdr;
-		break;
-	case 6:
-		*val = (task->thread.fdr >> 32) & 0xffff;
-		break;
-	}
-}
-
-static void setfpreg(struct task_struct *task, int regno, int val)
-{
-	switch (regno / sizeof(int)) {
-	case 0:
-		task->thread.fcr = (task->thread.fcr & (~0x1f3f))
-			| (val & 0x1f3f);
-		break;
-	case 1:
-		task->thread.fsr = (task->thread.fsr & (~0xffff)) | val;
-		break;
-	case 2:
-		task->thread.fsr = (task->thread.fsr & (~0xffff0000))
-			| (val << 16);
-		break;
-	case 3:
-		task->thread.fir = (task->thread.fir & (~0xffffffff)) | val;
-		break;
-	case 5:
-		task->thread.fdr = (task->thread.fdr & (~0xffffffff)) | val;
-		break;
-	}
-}
-
-static void access_fpreg_ia32(int regno, void *reg,
-		struct pt_regs *pt, struct switch_stack *sw,
-		int tos, int write)
-{
-	void *f;
-
-	if ((regno += tos) >= 8)
-		regno -= 8;
-	if (regno < 4)
-		f = &pt->f8 + regno;
-	else if (regno <= 7)
-		f = &sw->f12 + (regno - 4);
-	else {
-		printk(KERN_ERR "regno must be less than 7 \n");
-		 return;
-	}
-
-	if (write)
-		memcpy(f, reg, sizeof(struct _fpreg_ia32));
-	else
-		memcpy(reg, f, sizeof(struct _fpreg_ia32));
-}
-
-static void do_fpregs_get(struct unw_frame_info *info, void *arg)
-{
-	struct regset_getset *dst = arg;
-	struct task_struct *task = dst->target;
-	struct pt_regs *pt;
-	int start, end, tos;
-	char buf[80];
-
-	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
-		return;
-	if (dst->pos < 7 * sizeof(int)) {
-		end = min((dst->pos + dst->count),
-			(unsigned int)(7 * sizeof(int)));
-		for (start = dst->pos; start < end; start += sizeof(int))
-			getfpreg(task, start, (int *)(buf + start));
-		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
-				&dst->u.get.kbuf, &dst->u.get.ubuf, buf,
-				0, 7 * sizeof(int));
-		if (dst->ret || dst->count == 0)
-			return;
-	}
-	if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
-		pt = task_pt_regs(task);
-		tos = (task->thread.fsr >> 11) & 7;
-		end = min(dst->pos + dst->count,
-			(unsigned int)(sizeof(struct ia32_user_i387_struct)));
-		start = (dst->pos - 7 * sizeof(int)) /
-			sizeof(struct _fpreg_ia32);
-		end = (end - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
-		for (; start < end; start++)
-			access_fpreg_ia32(start,
-				(struct _fpreg_ia32 *)buf + start,
-				pt, info->sw, tos, 0);
-		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
-				&dst->u.get.kbuf, &dst->u.get.ubuf,
-				buf, 7 * sizeof(int),
-				sizeof(struct ia32_user_i387_struct));
-		if (dst->ret || dst->count == 0)
-			return;
-	}
-}
-
-static void do_fpregs_set(struct unw_frame_info *info, void *arg)
-{
-	struct regset_getset *dst = arg;
-	struct task_struct *task = dst->target;
-	struct pt_regs *pt;
-	char buf[80];
-	int end, start, tos;
-
-	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
-		return;
-
-	if (dst->pos < 7 * sizeof(int)) {
-		start = dst->pos;
-		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
-				&dst->u.set.kbuf, &dst->u.set.ubuf, buf,
-				0, 7 * sizeof(int));
-		if (dst->ret)
-			return;
-		for (; start < dst->pos; start += sizeof(int))
-			setfpreg(task, start, *((int *)(buf + start)));
-		if (dst->count == 0)
-			return;
-	}
-	if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
-		start = (dst->pos - 7 * sizeof(int)) /
-			sizeof(struct _fpreg_ia32);
-		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
-				&dst->u.set.kbuf, &dst->u.set.ubuf,
-				buf, 7 * sizeof(int),
-				sizeof(struct ia32_user_i387_struct));
-		if (dst->ret)
-			return;
-		pt = task_pt_regs(task);
-		tos = (task->thread.fsr >> 11) & 7;
-		end = (dst->pos - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
-		for (; start < end; start++)
-			access_fpreg_ia32(start,
-				(struct _fpreg_ia32 *)buf + start,
-				pt, info->sw, tos, 1);
-		if (dst->count == 0)
-			return;
-	}
-}
-
-#define OFFSET(member) ((int)(offsetof(struct ia32_user_fxsr_struct, member)))
-static void getfpxreg(struct task_struct *task, int start, int end, char *buf)
-{
-	int min_val;
-
-	min_val = min(end, OFFSET(fop));
-	while (start < min_val) {
-		if (start == OFFSET(cwd))
-			*((short *)buf) = task->thread.fcr & 0xffff;
-		else if (start == OFFSET(swd))
-			*((short *)buf) = task->thread.fsr & 0xffff;
-		else if (start == OFFSET(twd))
-			*((short *)buf) = (task->thread.fsr>>16) & 0xffff;
-		buf += 2;
-		start += 2;
-	}
-	/* skip fop element */
-	if (start == OFFSET(fop)) {
-		start += 2;
-		buf += 2;
-	}
-	while (start < end) {
-		if (start == OFFSET(fip))
-			*((int *)buf) = task->thread.fir;
-		else if (start == OFFSET(fcs))
-			*((int *)buf) = (task->thread.fir>>32) & 0xffff;
-		else if (start == OFFSET(foo))
-			*((int *)buf) = task->thread.fdr;
-		else if (start == OFFSET(fos))
-			*((int *)buf) = (task->thread.fdr>>32) & 0xffff;
-		else if (start == OFFSET(mxcsr))
-			*((int *)buf) = ((task->thread.fcr>>32) & 0xff80)
-					 | ((task->thread.fsr>>32) & 0x3f);
-		buf += 4;
-		start += 4;
-	}
-}
-
-static void setfpxreg(struct task_struct *task, int start, int end, char *buf)
-{
-	int min_val, num32;
-	short num;
-	unsigned long num64;
-
-	min_val = min(end, OFFSET(fop));
-	while (start < min_val) {
-		num = *((short *)buf);
-		if (start == OFFSET(cwd)) {
-			task->thread.fcr = (task->thread.fcr & (~0x1f3f))
-						| (num & 0x1f3f);
-		} else if (start == OFFSET(swd)) {
-			task->thread.fsr = (task->thread.fsr & (~0xffff)) | num;
-		} else if (start == OFFSET(twd)) {
-			task->thread.fsr = (task->thread.fsr & (~0xffff0000))
-				| (((int)num) << 16);
-		}
-		buf += 2;
-		start += 2;
-	}
-	/* skip fop element */
-	if (start == OFFSET(fop)) {
-		start += 2;
-		buf += 2;
-	}
-	while (start < end) {
-		num32 = *((int *)buf);
-		if (start == OFFSET(fip))
-			task->thread.fir = (task->thread.fir & (~0xffffffff))
-						 | num32;
-		else if (start == OFFSET(foo))
-			task->thread.fdr = (task->thread.fdr & (~0xffffffff))
-						 | num32;
-		else if (start == OFFSET(mxcsr)) {
-			num64 = num32 & 0xff10;
-			task->thread.fcr = (task->thread.fcr &
-				(~0xff1000000000UL)) | (num64<<32);
-			num64 = num32 & 0x3f;
-			task->thread.fsr = (task->thread.fsr &
-				(~0x3f00000000UL)) | (num64<<32);
-		}
-		buf += 4;
-		start += 4;
-	}
-}
-
-static void do_fpxregs_get(struct unw_frame_info *info, void *arg)
-{
-	struct regset_getset *dst = arg;
-	struct task_struct *task = dst->target;
-	struct pt_regs *pt;
-	char buf[128];
-	int start, end, tos;
-
-	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
-		return;
-	if (dst->pos < OFFSET(st_space[0])) {
-		end = min(dst->pos + dst->count, (unsigned int)32);
-		getfpxreg(task, dst->pos, end, buf);
-		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
-				&dst->u.get.kbuf, &dst->u.get.ubuf, buf,
-				0, OFFSET(st_space[0]));
-		if (dst->ret || dst->count == 0)
-			return;
-	}
-	if (dst->pos < OFFSET(xmm_space[0])) {
-		pt = task_pt_regs(task);
-		tos = (task->thread.fsr >> 11) & 7;
-		end = min(dst->pos + dst->count,
-				(unsigned int)OFFSET(xmm_space[0]));
-		start = (dst->pos - OFFSET(st_space[0])) / 16;
-		end = (end - OFFSET(st_space[0])) / 16;
-		for (; start < end; start++)
-			access_fpreg_ia32(start, buf + 16 * start, pt,
-						info->sw, tos, 0);
-		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
-				&dst->u.get.kbuf, &dst->u.get.ubuf,
-				buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
-		if (dst->ret || dst->count == 0)
-			return;
-	}
-	if (dst->pos < OFFSET(padding[0]))
-		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
-				&dst->u.get.kbuf, &dst->u.get.ubuf,
-				&info->sw->f16, OFFSET(xmm_space[0]),
-				OFFSET(padding[0]));
-}
-
-static void do_fpxregs_set(struct unw_frame_info *info, void *arg)
-{
-	struct regset_getset *dst = arg;
-	struct task_struct *task = dst->target;
-	char buf[128];
-	int start, end;
-
-	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
-		return;
-
-	if (dst->pos < OFFSET(st_space[0])) {
-		start = dst->pos;
-		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
-				&dst->u.set.kbuf, &dst->u.set.ubuf,
-				buf, 0, OFFSET(st_space[0]));
-		if (dst->ret)
-			return;
-		setfpxreg(task, start, dst->pos, buf);
-		if (dst->count == 0)
-			return;
-	}
-	if (dst->pos < OFFSET(xmm_space[0])) {
-		struct pt_regs *pt;
-		int tos;
-		pt = task_pt_regs(task);
-		tos = (task->thread.fsr >> 11) & 7;
-		start = (dst->pos - OFFSET(st_space[0])) / 16;
-		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
-				&dst->u.set.kbuf, &dst->u.set.ubuf,
-				buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
-		if (dst->ret)
-			return;
-		end = (dst->pos - OFFSET(st_space[0])) / 16;
-		for (; start < end; start++)
-			access_fpreg_ia32(start, buf + 16 * start, pt, info->sw,
-						 tos, 1);
-		if (dst->count == 0)
-			return;
-	}
-	if (dst->pos < OFFSET(padding[0]))
-		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
-				&dst->u.set.kbuf, &dst->u.set.ubuf,
-				&info->sw->f16, OFFSET(xmm_space[0]),
-				 OFFSET(padding[0]));
-}
-#undef OFFSET
-
-static int do_regset_call(void (*call)(struct unw_frame_info *, void *),
-		struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		const void *kbuf, const void __user *ubuf)
-{
-	struct regset_getset info = { .target = target, .regset = regset,
-		.pos = pos, .count = count,
-		.u.set = { .kbuf = kbuf, .ubuf = ubuf },
-		.ret = 0 };
-
-	if (target == current)
-		unw_init_running(call, &info);
-	else {
-		struct unw_frame_info ufi;
-		memset(&ufi, 0, sizeof(ufi));
-		unw_init_from_blocked_task(&ufi, target);
-		(*call)(&ufi, &info);
-	}
-
-	return info.ret;
-}
-
-static int ia32_fpregs_get(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		void *kbuf, void __user *ubuf)
-{
-	return do_regset_call(do_fpregs_get, target, regset, pos, count,
-		kbuf, ubuf);
-}
-
-static int ia32_fpregs_set(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		const void *kbuf, const void __user *ubuf)
-{
-	return do_regset_call(do_fpregs_set, target, regset, pos, count,
-		kbuf, ubuf);
-}
-
-static int ia32_fpxregs_get(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		void *kbuf, void __user *ubuf)
-{
-	return do_regset_call(do_fpxregs_get, target, regset, pos, count,
-		kbuf, ubuf);
-}
-
-static int ia32_fpxregs_set(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		const void *kbuf, const void __user *ubuf)
-{
-	return do_regset_call(do_fpxregs_set, target, regset, pos, count,
-		kbuf, ubuf);
-}
-
-static int ia32_genregs_get(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		void *kbuf, void __user *ubuf)
-{
-	if (kbuf) {
-		u32 *kp = kbuf;
-		while (count > 0) {
-			*kp++ = getreg(target, pos);
-			pos += 4;
-			count -= 4;
-		}
-	} else {
-		u32 __user *up = ubuf;
-		while (count > 0) {
-			if (__put_user(getreg(target, pos), up++))
-				return -EFAULT;
-			pos += 4;
-			count -= 4;
-		}
-	}
-	return 0;
-}
-
-static int ia32_genregs_set(struct task_struct *target,
-		const struct user_regset *regset,
-		unsigned int pos, unsigned int count,
-		const void *kbuf, const void __user *ubuf)
-{
-	int ret = 0;
-
-	if (kbuf) {
-		const u32 *kp = kbuf;
-		while (!ret && count > 0) {
-			putreg(target, pos, *kp++);
-			pos += 4;
-			count -= 4;
-		}
-	} else {
-		const u32 __user *up = ubuf;
-		u32 val;
-		while (!ret && count > 0) {
-			ret = __get_user(val, up++);
-			if (!ret)
-				putreg(target, pos, val);
-			pos += 4;
-			count -= 4;
-		}
-	}
-	return ret;
-}
-
-static int ia32_tls_active(struct task_struct *target,
-		const struct user_regset *regset)
-{
-	struct thread_struct *t = &target->thread;
-	int n = GDT_ENTRY_TLS_ENTRIES;
-	while (n > 0 && desc_empty(&t->tls_array[n -1]))
-		--n;
-	return n;
-}
-
-static int ia32_tls_get(struct task_struct *target,
-		const struct user_regset *regset, unsigned int pos,
-		unsigned int count, void *kbuf, void __user *ubuf)
-{
-	const struct desc_struct *tls;
-
-	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
-			(pos % sizeof(struct ia32_user_desc)) != 0 ||
-			(count % sizeof(struct ia32_user_desc)) != 0)
-		return -EINVAL;
-
-	pos /= sizeof(struct ia32_user_desc);
-	count /= sizeof(struct ia32_user_desc);
-
-	tls = &target->thread.tls_array[pos];
-
-	if (kbuf) {
-		struct ia32_user_desc *info = kbuf;
-		while (count-- > 0)
-			fill_user_desc(info++, GDT_ENTRY_TLS_MIN + pos++,
-					tls++);
-	} else {
-		struct ia32_user_desc __user *u_info = ubuf;
-		while (count-- > 0) {
-			struct ia32_user_desc info;
-			fill_user_desc(&info, GDT_ENTRY_TLS_MIN + pos++, tls++);
-			if (__copy_to_user(u_info++, &info, sizeof(info)))
-				return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-static int ia32_tls_set(struct task_struct *target,
-		const struct user_regset *regset, unsigned int pos,
-		unsigned int count, const void *kbuf, const void __user *ubuf)
-{
-	struct ia32_user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
-	const struct ia32_user_desc *info;
-
-	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
-			(pos % sizeof(struct ia32_user_desc)) != 0 ||
-			(count % sizeof(struct ia32_user_desc)) != 0)
-		return -EINVAL;
-
-	if (kbuf)
-		info = kbuf;
-	else if (__copy_from_user(infobuf, ubuf, count))
-		return -EFAULT;
-	else
-		info = infobuf;
-
-	set_tls_desc(target,
-		GDT_ENTRY_TLS_MIN + (pos / sizeof(struct ia32_user_desc)),
-		info, count / sizeof(struct ia32_user_desc));
-
-	return 0;
-}
-
-/*
- * This should match arch/i386/kernel/ptrace.c:native_regsets.
- * XXX ioperm? vm86?
- */
-static const struct user_regset ia32_regsets[] = {
-	{
-		.core_note_type = NT_PRSTATUS,
-		.n = sizeof(struct user_regs_struct32)/4,
-		.size = 4, .align = 4,
-		.get = ia32_genregs_get, .set = ia32_genregs_set
-	},
-	{
-		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct ia32_user_i387_struct) / 4,
-		.size = 4, .align = 4,
-		.get = ia32_fpregs_get, .set = ia32_fpregs_set
-	},
-	{
-		.core_note_type = NT_PRXFPREG,
-		.n = sizeof(struct ia32_user_fxsr_struct) / 4,
-		.size = 4, .align = 4,
-		.get = ia32_fpxregs_get, .set = ia32_fpxregs_set
-	},
-	{
-		.core_note_type = NT_386_TLS,
-		.n = GDT_ENTRY_TLS_ENTRIES,
-		.bias = GDT_ENTRY_TLS_MIN,
-		.size = sizeof(struct ia32_user_desc),
-		.align = sizeof(struct ia32_user_desc),
-		.active = ia32_tls_active,
-		.get = ia32_tls_get, .set = ia32_tls_set,
-	},
-};
-
-const struct user_regset_view user_ia32_view = {
-	.name = "i386", .e_machine = EM_386,
-	.regsets = ia32_regsets, .n = ARRAY_SIZE(ia32_regsets)
-};
-
-long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high, 
-			__u32 len_low, __u32 len_high, int advice)
-{ 
-	return sys_fadvise64_64(fd,
-			       (((u64)offset_high)<<32) | offset_low,
-			       (((u64)len_high)<<32) | len_low,
-			       advice); 
-} 
-
-#ifdef	NOTYET  /* UNTESTED FOR IA64 FROM HERE DOWN */
-
-asmlinkage long sys32_setreuid(compat_uid_t ruid, compat_uid_t euid)
-{
-	uid_t sruid, seuid;
-
-	sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
-	seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
-	return sys_setreuid(sruid, seuid);
-}
-
-asmlinkage long
-sys32_setresuid(compat_uid_t ruid, compat_uid_t euid,
-		compat_uid_t suid)
-{
-	uid_t sruid, seuid, ssuid;
-
-	sruid = (ruid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)ruid);
-	seuid = (euid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)euid);
-	ssuid = (suid == (compat_uid_t)-1) ? ((uid_t)-1) : ((uid_t)suid);
-	return sys_setresuid(sruid, seuid, ssuid);
-}
-
-asmlinkage long
-sys32_setregid(compat_gid_t rgid, compat_gid_t egid)
-{
-	gid_t srgid, segid;
-
-	srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
-	segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
-	return sys_setregid(srgid, segid);
-}
-
-asmlinkage long
-sys32_setresgid(compat_gid_t rgid, compat_gid_t egid,
-		compat_gid_t sgid)
-{
-	gid_t srgid, segid, ssgid;
-
-	srgid = (rgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)rgid);
-	segid = (egid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)egid);
-	ssgid = (sgid == (compat_gid_t)-1) ? ((gid_t)-1) : ((gid_t)sgid);
-	return sys_setresgid(srgid, segid, ssgid);
-}
-#endif /* NOTYET */
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 7ae5889..837dc82 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -97,8 +97,34 @@ ia64_acpi_release_global_lock (unsigned int *lock)
 #endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
+static inline void pci_acpi_crs_quirks(void) { }
 
+#ifdef CONFIG_IA64_GENERIC
 const char *acpi_get_sysname (void);
+#else
+static inline const char *acpi_get_sysname (void)
+{
+# if defined (CONFIG_IA64_HP_SIM)
+	return "hpsim";
+# elif defined (CONFIG_IA64_HP_ZX1)
+	return "hpzx1";
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+	return "hpzx1_swiotlb";
+# elif defined (CONFIG_IA64_SGI_SN2)
+	return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+	return "uv";
+# elif defined (CONFIG_IA64_DIG)
+	return "dig";
+# elif defined (CONFIG_IA64_XEN_GUEST)
+	return "xen";
+# elif defined(CONFIG_IA64_DIG_VTD)
+	return "dig_vtd";
+# else
+#	error Unknown platform.  Fix acpi.c.
+# endif
+}
+#endif
 int acpi_request_vector (u32 int_type);
 int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
 
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index 88405cb..4e19484 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -21,8 +21,8 @@
 #define ATOMIC_INIT(i)		((atomic_t) { (i) })
 #define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
 
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		(((v)->counter) = (i))
 #define atomic64_set(v,i)	(((v)->counter) = (i))
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
index 6ebc229..9da3df6 100644
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -437,17 +437,18 @@ __fls (unsigned long x)
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
  */
-static __inline__ unsigned long
-hweight64 (unsigned long x)
+static __inline__ unsigned long __arch_hweight64(unsigned long x)
 {
 	unsigned long result;
 	result = ia64_popcnt(x);
 	return result;
 }
 
-#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
-#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
-#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+#define __arch_hweight32(x) ((unsigned int) __arch_hweight64((x) & 0xfffffffful))
+#define __arch_hweight16(x) ((unsigned int) __arch_hweight64((x) & 0xfffful))
+#define __arch_hweight8(x)  ((unsigned int) __arch_hweight64((x) & 0xfful))
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
index dfcf75b..f90edc8 100644
--- a/arch/ia64/include/asm/compat.h
+++ b/arch/ia64/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h
index 00eb1b1..1ed4c8f 100644
--- a/arch/ia64/include/asm/dmi.h
+++ b/arch/ia64/include/asm/dmi.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_DMI_H
 #define _ASM_DMI_H 1
 
+#include <linux/slab.h>
 #include <asm/io.h>
 
 /* Use normal IO mappings for DMI */
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
index e14108b..b5298eb 100644
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -201,7 +201,9 @@ extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
    relevant until we have real hardware to play with... */
 #define ELF_PLATFORM	NULL
 
-#define SET_PERSONALITY(ex)	set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex)	\
+	set_personality((current->personality & ~PER_MASK) | PER_LINUX)
+
 #define elf_read_implies_exec(ex, executable_stack)					\
 	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
 
@@ -217,54 +219,6 @@ do {										\
 	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
 } while (0)
 
-
-/*
- * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the gate DSO contents.  Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the gate DSO was being used.
- */
-#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
-#define ELF_CORE_WRITE_EXTRA_PHDRS						\
-do {										\
-	const struct elf_phdr *const gate_phdrs =			      \
-		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
-	int i;									\
-	Elf64_Off ofs = 0;						      \
-	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
-		struct elf_phdr phdr = gate_phdrs[i];			      \
-		if (phdr.p_type == PT_LOAD) {					\
-			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
-			phdr.p_filesz = phdr.p_memsz;			      \
-			if (ofs == 0) {					      \
-				ofs = phdr.p_offset = offset;		      \
-			offset += phdr.p_filesz;				\
-		}							      \
-		else							      \
-				phdr.p_offset = ofs;			      \
-		}							      \
-		else							      \
-			phdr.p_offset += ofs;					\
-		phdr.p_paddr = 0; /* match other core phdrs */			\
-		DUMP_WRITE(&phdr, sizeof(phdr));				\
-	}									\
-} while (0)
-#define ELF_CORE_WRITE_EXTRA_DATA					\
-do {									\
-	const struct elf_phdr *const gate_phdrs =			      \
-		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
-	int i;								\
-	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
-		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
-			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
-				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
-			break;						      \
-		}							      \
-	}								\
-} while (0)
-
 /*
  * format for entries in the Global Offset Table
  */
diff --git a/arch/ia64/include/asm/ia32.h b/arch/ia64/include/asm/ia32.h
deleted file mode 100644
index 2390ee1..0000000
--- a/arch/ia64/include/asm/ia32.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_IA64_IA32_H
-#define _ASM_IA64_IA32_H
-
-
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-
-#define IA32_NR_syscalls		285	/* length of syscall table */
-#define IA32_PAGE_SHIFT			12	/* 4KB pages */
-
-#ifndef __ASSEMBLY__
-
-# ifdef CONFIG_IA32_SUPPORT
-
-#define IA32_PAGE_OFFSET	0xc0000000
-
-extern void ia32_cpu_init (void);
-extern void ia32_mem_init (void);
-extern void ia32_gdt_init (void);
-extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
-extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
-extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
-
-# endif /* !CONFIG_IA32_SUPPORT */
-
-/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
-extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
-			      sigset_t *set, struct pt_regs *regs);
-#if PAGE_SHIFT > IA32_PAGE_SHIFT
-extern int ia32_copy_ia64_partial_page_list(struct task_struct *,
-					unsigned long);
-extern void ia32_drop_ia64_partial_page_list(struct task_struct *);
-#else
-# define ia32_copy_ia64_partial_page_list(a1, a2)	0
-# define ia32_drop_ia64_partial_page_list(a1)	do { ; } while (0)
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_IA64_IA32_H */
diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h
index f2ca320..e0de617 100644
--- a/arch/ia64/include/asm/mmzone.h
+++ b/arch/ia64/include/asm/mmzone.h
@@ -19,16 +19,12 @@
 
 static inline int pfn_to_nid(unsigned long pfn)
 {
-#ifdef CONFIG_NUMA
 	extern int paddr_to_nid(unsigned long);
 	int nid = paddr_to_nid(pfn << PAGE_SHIFT);
 	if (nid < 0)
 		return 0;
 	else
 		return nid;
-#else
-	return 0;
-#endif
 }
 
 #ifdef CONFIG_IA64_DIG /* DIG systems are small */
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 55281aa..73b5f78 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -56,20 +56,6 @@ pcibios_penalize_isa_irq (int irq, int active)
 
 #include <asm-generic/pci-dma-compat.h>
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
index 35d9aeb..14aa1c5 100644
--- a/arch/ia64/include/asm/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
@@ -9,7 +9,7 @@
 #define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
 
 #ifdef __ASSEMBLY__
-# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
+# define THIS_CPU(var)	(var)  /* use this to mark accesses to per-CPU variables... */
 #else /* !__ASSEMBLY__ */
 
 
@@ -39,7 +39,10 @@ extern void *per_cpu_init(void);
  * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
  * more efficient.
  */
-#define __ia64_per_cpu_var(var)	per_cpu__##var
+#define __ia64_per_cpu_var(var) (*({					\
+	__verify_pcpu_ptr(&(var));					\
+	((typeof(var) __kernel __force *)&(var));			\
+}))
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 69bf138..c3286f4 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -462,7 +462,7 @@ pte_same (pte_t a, pte_t b)
 	return pte_val(a) == pte_val(b);
 }
 
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern void paging_init (void);
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
index 7fa90f7..348e44d 100644
--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -270,23 +270,6 @@ typedef struct {
 		 (int __user *) (addr));							\
 })
 
-#ifdef CONFIG_IA32_SUPPORT
-struct desc_struct {
-	unsigned int a, b;
-};
-
-#define desc_empty(desc)		(!((desc)->a | (desc)->b))
-#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
-
-#define GDT_ENTRY_TLS_ENTRIES	3
-#define GDT_ENTRY_TLS_MIN	6
-#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
-
-#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
-
-struct ia64_partial_page_list;
-#endif
-
 struct thread_struct {
 	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
 	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
@@ -298,29 +281,6 @@ struct thread_struct {
 	__u64 rbs_bot;			/* the base address for the RBS */
 	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
 
-#ifdef CONFIG_IA32_SUPPORT
-	__u64 eflag;			/* IA32 EFLAGS reg */
-	__u64 fsr;			/* IA32 floating pt status reg */
-	__u64 fcr;			/* IA32 floating pt control reg */
-	__u64 fir;			/* IA32 fp except. instr. reg */
-	__u64 fdr;			/* IA32 fp except. data reg */
-	__u64 old_k1;			/* old value of ar.k1 */
-	__u64 old_iob;			/* old IOBase value */
-	struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */
-        /* cached TLS descriptors. */
-	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
-
-# define INIT_THREAD_IA32	.eflag =	0,			\
-				.fsr =		0,			\
-				.fcr =		0x17800000037fULL,	\
-				.fir =		0,			\
-				.fdr =		0,			\
-				.old_k1 =	0,			\
-				.old_iob =	0,			\
-				.ppl =		NULL,
-#else
-# define INIT_THREAD_IA32
-#endif /* CONFIG_IA32_SUPPORT */
 #ifdef CONFIG_PERFMON
 	void *pfm_context;		     /* pointer to detailed PMU context */
 	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
@@ -342,7 +302,6 @@ struct thread_struct {
 	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
 	.task_size =	DEFAULT_TASK_SIZE,			\
 	.last_fph_cpu =  -1,					\
-	INIT_THREAD_IA32					\
 	INIT_THREAD_PM						\
 	.dbr =		{0, },					\
 	.ibr =		{0, },					\
@@ -485,11 +444,6 @@ extern void __ia64_load_fpu (struct ia64_fpreg *fph);
 extern void ia64_save_debug_regs (unsigned long *save_area);
 extern void ia64_load_debug_regs (unsigned long *save_area);
 
-#ifdef CONFIG_IA32_SUPPORT
-extern void ia32_save_state (struct task_struct *task);
-extern void ia32_load_state (struct task_struct *task);
-#endif
-
 #define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
 #define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
 
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 14055c6..7ae9c3f 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -319,11 +319,7 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 	ptrace_attach_sync_user_rbs(child)
 
   #define arch_has_single_step()  (1)
-  extern void user_enable_single_step(struct task_struct *);
-  extern void user_disable_single_step(struct task_struct *);
-
   #define arch_has_block_step()   (1)
-  extern void user_enable_block_step(struct task_struct *);
 
 #endif /* !__KERNEL__ */
 
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
index d6f5787..f299a4f 100644
--- a/arch/ia64/include/asm/scatterlist.h
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -1,25 +1,7 @@
 #ifndef _ASM_IA64_SCATTERLIST_H
 #define _ASM_IA64_SCATTERLIST_H
 
-/*
- * Modified 1998-1999, 2001-2002, 2004
- *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;	/* buffer length */
-
-	dma_addr_t dma_address;
-	unsigned int dma_length;
-};
-
+#include <asm-generic/scatterlist.h>
 /*
  * It used to be that ISA_DMA_THRESHOLD had something to do with the
  * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
@@ -29,10 +11,6 @@ struct scatterlist {
  * that's 4GB - 1.
  */
 #define ISA_DMA_THRESHOLD	0xffffffff
-
-#define sg_dma_len(sg)		((sg)->dma_length)
-#define sg_dma_address(sg)	((sg)->dma_address)
-
-#define	ARCH_HAS_SG_CHAIN
+#define ARCH_HAS_SG_CHAIN
 
 #endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h
index 2f758a4..a7ff1c6 100644
--- a/arch/ia64/include/asm/syscall.h
+++ b/arch/ia64/include/asm/syscall.h
@@ -22,33 +22,18 @@ static inline long syscall_get_nr(struct task_struct *task,
 	if ((long)regs->cr_ifs < 0) /* Not a syscall */
 		return -1;
 
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs))
-		return regs->r1;
-#endif
-
 	return regs->r15;
 }
 
 static inline void syscall_rollback(struct task_struct *task,
 				    struct pt_regs *regs)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs))
-		regs->r8 = regs->r1;
-#endif
-
 	/* do nothing */
 }
 
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs))
-		return regs->r8;
-#endif
-
 	return regs->r10 == -1 ? regs->r8:0;
 }
 
@@ -62,13 +47,6 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs)) {
-		regs->r8 = (long) error ? error : val;
-		return;
-	}
-#endif
-
 	if (error) {
 		/* error < 0, but ia64 uses > 0 return value */
 		regs->r8 = -error;
@@ -89,37 +67,6 @@ static inline void syscall_get_arguments(struct task_struct *task,
 {
 	BUG_ON(i + n > 6);
 
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs)) {
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			*args++ = regs->r13;
-		case 5:
-			if (!n--) break;
-			*args++ = regs->r15;
-		case 4:
-			if (!n--) break;
-			*args++ = regs->r14;
-		case 3:
-			if (!n--) break;
-			*args++ = regs->r10;
-		case 2:
-			if (!n--) break;
-			*args++ = regs->r9;
-		case 1:
-			if (!n--) break;
-			*args++ = regs->r11;
-		case 0:
-			if (!n--) break;
-		default:
-			BUG();
-			break;
-		}
-
-		return;
-	}
-#endif
 	ia64_syscall_get_set_arguments(task, regs, i, n, args, 0);
 }
 
@@ -130,34 +77,6 @@ static inline void syscall_set_arguments(struct task_struct *task,
 {
 	BUG_ON(i + n > 6);
 
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(regs)) {
-		switch (i + n) {
-		case 6:
-			if (!n--) break;
-			regs->r13 = *args++;
-		case 5:
-			if (!n--) break;
-			regs->r15 = *args++;
-		case 4:
-			if (!n--) break;
-			regs->r14 = *args++;
-		case 3:
-			if (!n--) break;
-			regs->r10 = *args++;
-		case 2:
-			if (!n--) break;
-			regs->r9 = *args++;
-		case 1:
-			if (!n--) break;
-			regs->r11 = *args++;
-		case 0:
-			if (!n--) break;
-		}
-
-		return;
-	}
-#endif
 	ia64_syscall_get_set_arguments(task, regs, i, n, args, 1);
 }
 #endif	/* _ASM_SYSCALL_H */
diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h
index 927a381..9f342a5 100644
--- a/arch/ia64/include/asm/system.h
+++ b/arch/ia64/include/asm/system.h
@@ -191,15 +191,6 @@ do {								\
 
 #ifdef __KERNEL__
 
-#ifdef CONFIG_IA32_SUPPORT
-# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
-#else
-# define IS_IA32_PROCESS(regs)		0
-struct task_struct;
-static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
-static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
-#endif
-
 /*
  * Context switch from one thread to another.  If the two threads have
  * different address spaces, schedule() has already taken care of
@@ -233,7 +224,7 @@ extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct
 
 #define IA64_HAS_EXTRA_STATE(t)							\
 	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
-	 || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
+	 || PERFMON_IS_SYSWIDE())
 
 #define __switch_to(prev,next,last) do {							 \
 	IA64_ACCOUNT_ON_SWITCH(prev, next);							 \
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 8ce2e38..b6a5ba2 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -102,7 +102,7 @@ struct thread_info {
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
 #define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
 #define TIF_FREEZE		20	/* is freezing for suspend */
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index d323071..09f6467 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -26,11 +26,6 @@
 #define RECLAIM_DISTANCE 15
 
 /*
- * Returns the number of the node containing CPU 'cpu'
- */
-#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
-
-/*
  * Returns a bitmask of CPUs on Node 'node'.
  */
 #define cpumask_of_node(node) ((node) == -1 ?				\
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 10a8f21..bb8b0ff 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -335,20 +335,6 @@
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
-#ifdef CONFIG_IA32_SUPPORT
-# define __ARCH_WANT_SYS_FADVISE64
-# define __ARCH_WANT_SYS_GETPGRP
-# define __ARCH_WANT_SYS_LLSEEK
-# define __ARCH_WANT_SYS_NICE
-# define __ARCH_WANT_SYS_OLD_GETRLIMIT
-# define __ARCH_WANT_SYS_OLDUMOUNT
-# define __ARCH_WANT_SYS_PAUSE
-# define __ARCH_WANT_SYS_SIGPENDING
-# define __ARCH_WANT_SYS_SIGPROCMASK
-# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-# define __ARCH_WANT_COMPAT_SYS_TIME
-#endif
-
 #if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
 
 #include <linux/types.h>
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
index b8370c8..baa74c8 100644
--- a/arch/ia64/include/asm/xen/events.h
+++ b/arch/ia64/include/asm/xen/events.h
@@ -36,10 +36,6 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return !(ia64_psr(regs)->i);
 }
 
-static inline void handle_irq(int irq, struct pt_regs *regs)
-{
-	__do_IRQ(irq);
-}
 #define irq_ctx_init(cpu)	do { } while (0)
 
 #endif /* _ASM_IA64_XEN_EVENTS_H */
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index e123634..db10b1e 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -8,15 +8,13 @@ endif
 
 extra-y	:= head.o init_task.o vmlinux.lds
 
-obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
+obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o paravirt_patchlist.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
 	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o
 
+obj-$(CONFIG_ACPI)		+= acpi.o acpi-ext.o
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
-obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
-obj-$(CONFIG_IA64_HP_ZX1)	+= acpi-ext.o
-obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o
 
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
 obj-$(CONFIG_IOSAPIC)		+= iosapic.o
@@ -47,6 +45,8 @@ endif
 obj-$(CONFIG_DMAR)		+= pci-dma.o
 obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
 
+obj-$(CONFIG_BINFMT_ELF)	+= elfcore.o
+
 # fp_emulate() expects f2-f5,f16-f31 to contain the user-level state.
 CFLAGS_traps.o  += -mfixed-range=f2-f5,f16-f31
 
diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c
index b7515bc..8b9318d 100644
--- a/arch/ia64/kernel/acpi-ext.c
+++ b/arch/ia64/kernel/acpi-ext.c
@@ -10,6 +10,7 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/acpi.h>
 
 #include <asm/acpi-ext.h>
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 40574ae..c6c90f3 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -44,6 +44,8 @@
 #include <linux/efi.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
+#include <linux/slab.h>
+#include <acpi/processor.h>
 #include <asm/io.h>
 #include <asm/iosapic.h>
 #include <asm/machvec.h>
@@ -60,11 +62,6 @@
 
 #define PREFIX			"ACPI: "
 
-void (*pm_idle) (void);
-EXPORT_SYMBOL(pm_idle);
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
-
 u32 acpi_rsdt_forced;
 unsigned int acpi_cpei_override;
 unsigned int acpi_cpei_phys_cpuid;
@@ -83,12 +80,10 @@ static unsigned long __init acpi_find_rsdp(void)
 		       "v1.0/r0.71 tables no longer supported\n");
 	return rsdp_phys;
 }
-#endif
 
 const char __init *
 acpi_get_sysname(void)
 {
-#ifdef CONFIG_IA64_GENERIC
 	unsigned long rsdp_phys;
 	struct acpi_table_rsdp *rsdp;
 	struct acpi_table_xsdt *xsdt;
@@ -143,30 +138,8 @@ acpi_get_sysname(void)
 #endif
 
 	return "dig";
-#else
-# if defined (CONFIG_IA64_HP_SIM)
-	return "hpsim";
-# elif defined (CONFIG_IA64_HP_ZX1)
-	return "hpzx1";
-# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
-	return "hpzx1_swiotlb";
-# elif defined (CONFIG_IA64_SGI_SN2)
-	return "sn2";
-# elif defined (CONFIG_IA64_SGI_UV)
-	return "uv";
-# elif defined (CONFIG_IA64_DIG)
-	return "dig";
-# elif defined (CONFIG_IA64_XEN_GUEST)
-	return "xen";
-# elif defined(CONFIG_IA64_DIG_VTD)
-	return "dig_vtd";
-# else
-#	error Unknown platform.  Fix acpi.c.
-# endif
-#endif
 }
-
-#ifdef CONFIG_ACPI
+#endif /* CONFIG_IA64_GENERIC */
 
 #define ACPI_MAX_PLATFORM_INTERRUPTS	256
 
@@ -812,6 +785,14 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 	return 0;
 }
 
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq >= 16)
+		return -1;
+	*gsi = isa_irq;
+	return 0;
+}
+
 /*
  *  ACPI based hotplug CPU support
  */
@@ -881,8 +862,8 @@ __init void prefill_possible_map(void)
 
 	possible = available_cpus + additional_cpus;
 
-	if (possible > NR_CPUS)
-		possible = NR_CPUS;
+	if (possible > nr_cpu_ids)
+		possible = nr_cpu_ids;
 
 	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
 		possible, max((possible - available_cpus), 0));
@@ -936,6 +917,8 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	cpu_set(cpu, cpu_present_map);
 	ia64_cpu_to_sapicid[cpu] = physid;
 
+	acpi_processor_set_pdc(handle);
+
 	*pcpu = cpu;
 	return (0);
 }
@@ -1060,5 +1043,3 @@ void acpi_restore_state_mem(void) {}
  * do_suspend_lowlevel()
  */
 void do_suspend_lowlevel(void) {}
-
-#endif				/* CONFIG_ACPI */
diff --git a/arch/ia64/kernel/audit.c b/arch/ia64/kernel/audit.c
index f3802ae..96a9d18 100644
--- a/arch/ia64/kernel/audit.c
+++ b/arch/ia64/kernel/audit.c
@@ -30,20 +30,11 @@ static unsigned signal_class[] = {
 
 int audit_classify_arch(int arch)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	if (arch == AUDIT_ARCH_I386)
-		return 1;
-#endif
 	return 0;
 }
 
 int audit_classify_syscall(int abi, unsigned syscall)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	extern int ia32_classify_syscall(unsigned);
-	if (abi == AUDIT_ARCH_I386)
-		return ia32_classify_syscall(syscall);
-#endif
 	switch(syscall) {
 	case __NR_open:
 		return 2;
@@ -58,18 +49,6 @@ int audit_classify_syscall(int abi, unsigned syscall)
 
 static int __init audit_classes_init(void)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	extern __u32 ia32_dir_class[];
-	extern __u32 ia32_write_class[];
-	extern __u32 ia32_read_class[];
-	extern __u32 ia32_chattr_class[];
-	extern __u32 ia32_signal_class[];
-	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
-	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
-	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
-	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
-	audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
-#endif
 	audit_register_class(AUDIT_CLASS_WRITE, write_class);
 	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index 7b43545..22f6152 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
@@ -112,7 +113,7 @@ processor_get_freq (
 	dprintk("processor_get_freq\n");
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (smp_processor_id() != cpu)
 		goto migrate_end;
 
@@ -120,7 +121,7 @@ processor_get_freq (
 	ret = processor_get_pstate(&value);
 
 	if (ret) {
-		set_cpus_allowed(current, saved_mask);
+		set_cpus_allowed_ptr(current, &saved_mask);
 		printk(KERN_WARNING "get performance failed with error %d\n",
 		       ret);
 		ret = 0;
@@ -130,7 +131,7 @@ processor_get_freq (
 	ret = (clock_freq*1000);
 
 migrate_end:
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return ret;
 }
 
@@ -150,7 +151,7 @@ processor_set_freq (
 	dprintk("processor_set_freq\n");
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (smp_processor_id() != cpu) {
 		retval = -EAGAIN;
 		goto migrate_end;
@@ -207,7 +208,7 @@ processor_set_freq (
 	retval = 0;
 
 migrate_end:
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return (retval);
 }
 
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index c745d0a..a0f0019 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/efi.h>
 #include <linux/kexec.h>
diff --git a/arch/ia64/kernel/elfcore.c b/arch/ia64/kernel/elfcore.c
new file mode 100644
index 0000000..bac1639
--- /dev/null
+++ b/arch/ia64/kernel/elfcore.c
@@ -0,0 +1,80 @@
+#include <linux/elf.h>
+#include <linux/coredump.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/elf.h>
+
+
+Elf64_Half elf_core_extra_phdrs(void)
+{
+	return GATE_EHDR->e_phnum;
+}
+
+int elf_core_write_extra_phdrs(struct file *file, loff_t offset, size_t *size,
+			       unsigned long limit)
+{
+	const struct elf_phdr *const gate_phdrs =
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);
+	int i;
+	Elf64_Off ofs = 0;
+
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {
+		struct elf_phdr phdr = gate_phdrs[i];
+
+		if (phdr.p_type == PT_LOAD) {
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);
+			phdr.p_filesz = phdr.p_memsz;
+			if (ofs == 0) {
+				ofs = phdr.p_offset = offset;
+				offset += phdr.p_filesz;
+			} else {
+				phdr.p_offset = ofs;
+			}
+		} else {
+			phdr.p_offset += ofs;
+		}
+		phdr.p_paddr = 0; /* match other core phdrs */
+		*size += sizeof(phdr);
+		if (*size > limit || !dump_write(file, &phdr, sizeof(phdr)))
+			return 0;
+	}
+	return 1;
+}
+
+int elf_core_write_extra_data(struct file *file, size_t *size,
+			      unsigned long limit)
+{
+	const struct elf_phdr *const gate_phdrs =
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);
+	int i;
+
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {
+		if (gate_phdrs[i].p_type == PT_LOAD) {
+			void *addr = (void *)gate_phdrs[i].p_vaddr;
+			size_t memsz = PAGE_ALIGN(gate_phdrs[i].p_memsz);
+
+			*size += memsz;
+			if (*size > limit || !dump_write(file, addr, memsz))
+				return 0;
+			break;
+		}
+	}
+	return 1;
+}
+
+size_t elf_core_extra_data_size(void)
+{
+	const struct elf_phdr *const gate_phdrs =
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);
+	int i;
+	size_t size = 0;
+
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {
+		if (gate_phdrs[i].p_type == PT_LOAD) {
+			size += PAGE_ALIGN(gate_phdrs[i].p_memsz);
+			break;
+		}
+	}
+	return size;
+}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d75b872..9a260b3 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -71,15 +71,6 @@ ENTRY(ia64_execve)
 	add out3=16,sp			// regs
 	br.call.sptk.many rp=sys_execve
 .ret0:
-#ifdef CONFIG_IA32_SUPPORT
-	/*
-	 * Check if we're returning to ia32 mode. If so, we need to restore ia32 registers
-	 * from pt_regs.
-	 */
-	adds r16=PT(CR_IPSR)+16,sp
-	;;
-	ld8 r16=[r16]
-#endif
 	cmp4.ge p6,p7=r8,r0
 	mov ar.pfs=loc1			// restore ar.pfs
 	sxt4 r8=r8			// return 64-bit result
@@ -108,12 +99,6 @@ ENTRY(ia64_execve)
 	ldf.fill f23=[sp];	ldf.fill f24=[sp];	mov f25=f0
 	ldf.fill f26=[sp];	ldf.fill f27=[sp];	mov f28=f0
 	ldf.fill f29=[sp];	ldf.fill f30=[sp];	mov f31=f0
-#ifdef CONFIG_IA32_SUPPORT
-	tbit.nz p6,p0=r16, IA64_PSR_IS_BIT
-	movl loc0=ia64_ret_from_ia32_execve
-	;;
-(p6)	mov rp=loc0
-#endif
 	br.ret.sptk.many rp
 END(ia64_execve)
 
@@ -848,30 +833,6 @@ __paravirt_work_processed_syscall:
 	br.cond.sptk.many rbs_switch	// B
 END(__paravirt_leave_syscall)
 
-#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
-#ifdef CONFIG_IA32_SUPPORT
-GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
-	PT_REGS_UNWIND_INFO(0)
-	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
-	adds r3=PT(R10)+16,sp			// r3 = &pt_regs.r10
-	;;
-	.mem.offset 0,0
-	st8.spill [r2]=r8	// store return value in slot for r8 and set unat bit
-	.mem.offset 8,0
-	st8.spill [r3]=r0	// clear error indication in slot for r10 and set unat bit
-#ifdef CONFIG_PARAVIRT
-	;;
-	// don't fall through, ia64_leave_kernel may be #define'd
-	br.cond.sptk.few ia64_leave_kernel
-	;;
-#endif /* CONFIG_PARAVIRT */
-END(ia64_ret_from_ia32_execve)
-#ifndef CONFIG_PARAVIRT
-	// fall through
-#endif
-#endif /* CONFIG_IA32_SUPPORT */
-#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
-
 GLOBAL_ENTRY(__paravirt_leave_kernel)
 	PT_REGS_UNWIND_INFO(0)
 	/*
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 461b999..7f4a0ed 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -30,9 +30,9 @@ EXPORT_SYMBOL(max_low_pfn);	/* defined by bootmem.c, but not exported by generic
 #endif
 
 #include <asm/processor.h>
-EXPORT_SYMBOL(per_cpu__ia64_cpu_info);
+EXPORT_SYMBOL(ia64_cpu_info);
 #ifdef CONFIG_SMP
-EXPORT_SYMBOL(per_cpu__local_per_cpu_offset);
+EXPORT_SYMBOL(local_per_cpu_offset);
 #endif
 
 #include <asm/uaccess.h>
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 95ac77a..7ded766 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -86,6 +86,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/smp.h>
 #include <linux/string.h>
 #include <linux/bootmem.h>
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index d4093a1..f14c35f 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -22,7 +22,6 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/kernel_stat.h>
-#include <linux/slab.h>
 #include <linux/ptrace.h>
 #include <linux/random.h>	/* for rand_initialize_irq() */
 #include <linux/signal.h>
@@ -30,6 +29,7 @@
 #include <linux/threads.h>
 #include <linux/bitops.h>
 #include <linux/irq.h>
+#include <linux/ratelimit.h>
 
 #include <asm/delay.h>
 #include <asm/intrinsics.h>
@@ -468,13 +468,9 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 		sp = ia64_getreg(_IA64_REG_SP);
 
 		if ((sp - bsp) < 1024) {
-			static unsigned char count;
-			static long last_time;
+			static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 
-			if (time_after(jiffies, last_time + 5 * HZ))
-				count = 0;
-			if (++count < 5) {
-				last_time = jiffies;
+			if (__ratelimit(&ratelimit)) {
 				printk("ia64_handle_irq: DANGER: less than "
 				       "1KB of free stack space!!\n"
 				       "(bsp=0x%lx, sp=%lx)\n", bsp, sp);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 0c14512..d93e396 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -49,7 +49,6 @@
 
 #include <asm/asmmacro.h>
 #include <asm/break.h>
-#include <asm/ia32.h>
 #include <asm/kregs.h>
 #include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
@@ -1386,28 +1385,6 @@ END(ia32_exception)
 // 0x6a00 Entry 46 (size 16 bundles) IA-32 Intercept  (30,31,59,70,71)
 ENTRY(ia32_intercept)
 	DBG_FAULT(46)
-#ifdef	CONFIG_IA32_SUPPORT
-	mov r31=pr
-	MOV_FROM_ISR(r16)
-	;;
-	extr.u r17=r16,16,8	// get ISR.code
-	mov r18=ar.eflag
-	MOV_FROM_IIM(r19)	// old eflag value
-	;;
-	cmp.ne p6,p0=2,r17
-(p6)	br.cond.spnt 1f		// not a system flag fault
-	xor r16=r18,r19
-	;;
-	extr.u r17=r16,18,1	// get the eflags.ac bit
-	;;
-	cmp.eq p6,p0=0,r17
-(p6)	br.cond.spnt 1f		// eflags.ac bit didn't change
-	;;
-	mov pr=r31,-1		// restore predicate registers
-	RFI
-
-1:
-#endif	// CONFIG_IA32_SUPPORT
 	FAULT(46)
 END(ia32_intercept)
 
@@ -1416,12 +1393,7 @@ END(ia32_intercept)
 // 0x6b00 Entry 47 (size 16 bundles) IA-32 Interrupt  (74)
 ENTRY(ia32_interrupt)
 	DBG_FAULT(47)
-#ifdef CONFIG_IA32_SUPPORT
-	mov r31=pr
-	br.sptk.many dispatch_to_ia32_handler
-#else
 	FAULT(47)
-#endif
 END(ia32_interrupt)
 
 	.org ia64_ivt+0x6c00
@@ -1715,89 +1687,3 @@ ENTRY(dispatch_illegal_op_fault)
 (p6)	br.call.dpnt.many b6=b6		// call returns to ia64_leave_kernel
 	br.sptk.many ia64_leave_kernel
 END(dispatch_illegal_op_fault)
-
-#ifdef CONFIG_IA32_SUPPORT
-
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-	// IA32 interrupt entry point
-
-ENTRY(dispatch_to_ia32_handler)
-	SAVE_MIN
-	;;
-	MOV_FROM_ISR(r14)
-	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
-				// guarantee that interruption collection is on
-	;;
-	SSM_PSR_I(p15, p15, r3)
-	adds r3=8,r2		// Base pointer for SAVE_REST
-	;;
-	SAVE_REST
-	;;
-	mov r15=0x80
-	shr r14=r14,16		// Get interrupt number
-	;;
-	cmp.ne p6,p0=r14,r15
-(p6)	br.call.dpnt.many b6=non_ia32_syscall
-
-	adds r14=IA64_PT_REGS_R8_OFFSET + 16,sp	// 16 byte hole per SW conventions
-	adds r15=IA64_PT_REGS_R1_OFFSET + 16,sp
-	;;
-	cmp.eq pSys,pNonSys=r0,r0 // set pSys=1, pNonSys=0
-	ld8 r8=[r14]		// get r8
-	;;
-	st8 [r15]=r8		// save original EAX in r1 (IA32 procs don't use the GP)
-	;;
-	alloc r15=ar.pfs,0,0,6,0	// must first in an insn group
-	;;
-	ld4 r8=[r14],8		// r8 == eax (syscall number)
-	mov r15=IA32_NR_syscalls
-	;;
-	cmp.ltu.unc p6,p7=r8,r15
-	ld4 out1=[r14],8	// r9 == ecx
-	;;
-	ld4 out2=[r14],8	// r10 == edx
-	;;
-	ld4 out0=[r14]		// r11 == ebx
-	adds r14=(IA64_PT_REGS_R13_OFFSET) + 16,sp
-	;;
-	ld4 out5=[r14],PT(R14)-PT(R13)	// r13 == ebp
-	;;
-	ld4 out3=[r14],PT(R15)-PT(R14)	// r14 == esi
-	adds r2=TI_FLAGS+IA64_TASK_SIZE,r13
-	;;
-	ld4 out4=[r14]		// r15 == edi
-	movl r16=ia32_syscall_table
-	;;
-(p6)	shladd r16=r8,3,r16	// force ni_syscall if not valid syscall number
-	ld4 r2=[r2]		// r2 = current_thread_info()->flags
-	;;
-	ld8 r16=[r16]
-	and r2=_TIF_SYSCALL_TRACEAUDIT,r2	// mask trace or audit
-	;;
-	mov b6=r16
-	movl r15=ia32_ret_from_syscall
-	cmp.eq p8,p0=r2,r0
-	;;
-	mov rp=r15
-(p8)	br.call.sptk.many b6=b6
-	br.cond.sptk ia32_trace_syscall
-
-non_ia32_syscall:
-	alloc r15=ar.pfs,0,0,2,0
-	mov out0=r14				// interrupt #
-	add out1=16,sp				// pointer to pt_regs
-	;;			// avoid WAW on CFM
-	br.call.sptk.many rp=ia32_bad_interrupt
-.ret1:	movl r15=ia64_leave_kernel
-	;;
-	mov rp=r15
-	br.ret.sptk.many rp
-END(dispatch_to_ia32_handler)
-
-#endif /* CONFIG_IA32_SUPPORT */
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 9adac44..7026b29 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -870,7 +870,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		return 1;
 
 ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
+#if !defined(CONFIG_PREEMPT)
 	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
 		ia64_psr(regs)->ri = p->ainsn.slot;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 378b483..a0220dc 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -85,6 +85,7 @@
 #include <linux/cpumask.h>
 #include <linux/kdebug.h>
 #include <linux/cpu.h>
+#include <linux/gfp.h>
 
 #include <asm/delay.h>
 #include <asm/machvec.h>
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index f94aaa8..09b4d68 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -22,6 +22,7 @@
 #include <linux/smp.h>
 #include <linux/workqueue.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 
 #include <asm/delay.h>
 #include <asm/machvec.h>
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 53292ab..d9485d9 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -1,6 +1,7 @@
 /* Glue code to lib/swiotlb.c */
 
 #include <linux/pci.h>
+#include <linux/gfp.h>
 #include <linux/cache.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
@@ -30,8 +31,6 @@ struct dma_map_ops swiotlb_dma_ops = {
 	.unmap_sg = swiotlb_unmap_sg_attrs,
 	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
 	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.dma_supported = swiotlb_dma_supported,
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 6bcbe21..ab985f7 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -41,6 +41,7 @@
 #include <linux/rcupdate.h>
 #include <linux/completion.h>
 #include <linux/tracehook.h>
+#include <linux/slab.h>
 
 #include <asm/errno.h>
 #include <asm/intrinsics.h>
@@ -2315,6 +2316,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
 		DPRINT(("Cannot allocate vma\n"));
 		goto error_kmem;
 	}
+	INIT_LIST_HEAD(&vma->anon_vma_chain);
 
 	/*
 	 * partially initialize the vma for the sampling buffer
@@ -2713,7 +2715,7 @@ pfm_context_create(pfm_context_t *ctx, void *arg, int count, struct pt_regs *reg
 			goto buffer_error;
 	}
 
-	DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d \n",
+	DPRINT(("ctx=%p flags=0x%x system=%d notify_block=%d excl_idle=%d no_msg=%d ctx_fd=%d\n",
 		ctx,
 		ctx_flags,
 		ctx->ctx_fl_system,
@@ -3677,7 +3679,7 @@ pfm_restart(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
 	 * "self-monitoring".
 	 */
 	if (CTX_OVFL_NOBLOCK(ctx) == 0 && state == PFM_CTX_MASKED) {
-		DPRINT(("unblocking [%d] \n", task_pid_nr(task)));
+		DPRINT(("unblocking [%d]\n", task_pid_nr(task)));
 		complete(&ctx->ctx_restart_done);
 	} else {
 		DPRINT(("[%d] armed exit trap\n", task_pid_nr(task)));
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 9bcec99..53f1648 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -15,11 +15,11 @@
 #include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/personality.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/thread_info.h>
 #include <linux/unistd.h>
@@ -33,7 +33,6 @@
 #include <asm/cpu.h>
 #include <asm/delay.h>
 #include <asm/elf.h>
-#include <asm/ia32.h>
 #include <asm/irq.h>
 #include <asm/kexec.h>
 #include <asm/pgalloc.h>
@@ -60,6 +59,10 @@ unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
 unsigned long idle_nomwait;
 EXPORT_SYMBOL(idle_nomwait);
+void (*pm_idle) (void);
+EXPORT_SYMBOL(pm_idle);
+void (*pm_power_off) (void);
+EXPORT_SYMBOL(pm_power_off);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -358,11 +361,6 @@ ia64_save_extra (struct task_struct *task)
 	if (info & PFM_CPUINFO_SYST_WIDE)
 		pfm_syst_wide_update_task(task, info, 0);
 #endif
-
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(task_pt_regs(task)))
-		ia32_save_state(task);
-#endif
 }
 
 void
@@ -383,11 +381,6 @@ ia64_load_extra (struct task_struct *task)
 	if (info & PFM_CPUINFO_SYST_WIDE) 
 		pfm_syst_wide_update_task(task, info, 1);
 #endif
-
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(task_pt_regs(task)))
-		ia32_load_state(task);
-#endif
 }
 
 /*
@@ -426,7 +419,7 @@ copy_thread(unsigned long clone_flags,
 	     unsigned long user_stack_base, unsigned long user_stack_size,
 	     struct task_struct *p, struct pt_regs *regs)
 {
-	extern char ia64_ret_from_clone, ia32_ret_from_clone;
+	extern char ia64_ret_from_clone;
 	struct switch_stack *child_stack, *stack;
 	unsigned long rbs, child_rbs, rbs_size;
 	struct pt_regs *child_ptregs;
@@ -457,7 +450,7 @@ copy_thread(unsigned long clone_flags,
 	memcpy((void *) child_rbs, (void *) rbs, rbs_size);
 
 	if (likely(user_mode(child_ptregs))) {
-		if ((clone_flags & CLONE_SETTLS) && !IS_IA32_PROCESS(regs))
+		if (clone_flags & CLONE_SETTLS)
 			child_ptregs->r13 = regs->r16;	/* see sys_clone2() in entry.S */
 		if (user_stack_base) {
 			child_ptregs->r12 = user_stack_base + user_stack_size - 16;
@@ -477,10 +470,7 @@ copy_thread(unsigned long clone_flags,
 		child_ptregs->r13 = (unsigned long) p;		/* set `current' pointer */
 	}
 	child_stack->ar_bspstore = child_rbs + rbs_size;
-	if (IS_IA32_PROCESS(regs))
-		child_stack->b0 = (unsigned long) &ia32_ret_from_clone;
-	else
-		child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
+	child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
 
 	/* copy parts of thread_struct: */
 	p->thread.ksp = (unsigned long) child_stack - 16;
@@ -515,22 +505,6 @@ copy_thread(unsigned long clone_flags,
 	p->thread.flags = ((current->thread.flags & ~THREAD_FLAGS_TO_CLEAR)
 			   | THREAD_FLAGS_TO_SET);
 	ia64_drop_fpu(p);	/* don't pick up stale state from a CPU's fph */
-#ifdef CONFIG_IA32_SUPPORT
-	/*
-	 * If we're cloning an IA32 task then save the IA32 extra
-	 * state from the current task to the new task
-	 */
-	if (IS_IA32_PROCESS(task_pt_regs(current))) {
-		ia32_save_state(p);
-		if (clone_flags & CLONE_SETTLS)
-			retval = ia32_clone_tls(p, child_ptregs);
-
-		/* Copy partially mapped page list */
-		if (!retval)
-			retval = ia32_copy_ia64_partial_page_list(p,
-								clone_flags);
-	}
-#endif
 
 #ifdef CONFIG_PERFMON
 	if (current->thread.pfm_context)
@@ -704,15 +678,6 @@ EXPORT_SYMBOL(kernel_thread);
 int
 kernel_thread_helper (int (*fn)(void *), void *arg)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(task_pt_regs(current))) {
-		/* A kernel thread is always a 64-bit process. */
-		current->thread.map_base  = DEFAULT_MAP_BASE;
-		current->thread.task_size = DEFAULT_TASK_SIZE;
-		ia64_set_kr(IA64_KR_IO_BASE, current->thread.old_iob);
-		ia64_set_kr(IA64_KR_TSSD, current->thread.old_k1);
-	}
-#endif
 	return (*fn)(arg);
 }
 
@@ -725,14 +690,6 @@ flush_thread (void)
 	/* drop floating-point and debug-register state if it exists: */
 	current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
 	ia64_drop_fpu(current);
-#ifdef CONFIG_IA32_SUPPORT
-	if (IS_IA32_PROCESS(task_pt_regs(current))) {
-		ia32_drop_ia64_partial_page_list(current);
-		current->thread.task_size = IA32_PAGE_OFFSET;
-		set_fs(USER_DS);
-		memset(current->thread.tls_array, 0, sizeof(current->thread.tls_array));
-	}
-#endif
 }
 
 /*
@@ -753,8 +710,6 @@ exit_thread (void)
 	if (current->thread.flags & IA64_THREAD_DBG_VALID)
 		pfm_release_debug_registers(current);
 #endif
-	if (IS_IA32_PROCESS(task_pt_regs(current)))
-		ia32_drop_ia64_partial_page_list(current);
 }
 
 unsigned long
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 9daa87f..7c7909f 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -11,7 +11,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
@@ -639,7 +638,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
 	 */
 
 	read_lock(&tasklist_lock);
-	if (child->signal) {
+	if (child->sighand) {
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_STOPPED &&
 		    !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) {
@@ -663,7 +662,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
 	 * job control stop, so that SIGCONT can be used to wake it up.
 	 */
 	read_lock(&tasklist_lock);
-	if (child->signal) {
+	if (child->sighand) {
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_TRACED &&
 		    (child->signal->flags & SIGNAL_STOP_STOPPED)) {
@@ -1250,13 +1249,8 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 		long syscall;
 		int arch;
 
-		if (IS_IA32_PROCESS(&regs)) {
-			syscall = regs.r1;
-			arch = AUDIT_ARCH_I386;
-		} else {
-			syscall = regs.r15;
-			arch = AUDIT_ARCH_IA64;
-		}
+		syscall = regs.r15;
+		arch = AUDIT_ARCH_IA64;
 
 		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
@@ -2172,11 +2166,6 @@ static const struct user_regset_view user_ia64_view = {
 
 const struct user_regset_view *task_user_regset_view(struct task_struct *tsk)
 {
-#ifdef CONFIG_IA32_SUPPORT
-	extern const struct user_regset_view user_ia32_view;
-	if (IS_IA32_PROCESS(task_pt_regs(tsk)))
-		return &user_ia32_view;
-#endif
 	return &user_ia64_view;
 }
 
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index e6676fc..aa8b5fa 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -404,10 +404,9 @@ static void
 call_on_cpu(int cpu, void (*fn)(void *), void *arg)
 {
 	cpumask_t save_cpus_allowed = current->cpus_allowed;
-	cpumask_t new_cpus_allowed = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, new_cpus_allowed);
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	(*fn)(arg);
-	set_cpus_allowed(current, save_cpus_allowed);
+	set_cpus_allowed_ptr(current, &save_cpus_allowed);
 }
 
 static void
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index a1ea879..41ae6a5 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -46,7 +46,6 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 
-#include <asm/ia32.h>
 #include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/meminit.h>
@@ -1016,10 +1015,6 @@ cpu_init (void)
 	ia64_mmu_init(ia64_imva(cpu_data));
 	ia64_mca_cpu_init(ia64_imva(cpu_data));
 
-#ifdef CONFIG_IA32_SUPPORT
-	ia32_cpu_init();
-#endif
-
 	/* Clear ITC to eliminate sched_clock() overflows in human time.  */
 	ia64_set_itc(0);
 
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index e1821ca..7bdafc8 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -21,7 +21,6 @@
 #include <linux/unistd.h>
 #include <linux/wait.h>
 
-#include <asm/ia32.h>
 #include <asm/intrinsics.h>
 #include <asm/uaccess.h>
 #include <asm/rse.h>
@@ -425,14 +424,8 @@ static long
 handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset,
 	       struct sigscratch *scr)
 {
-	if (IS_IA32_PROCESS(&scr->pt)) {
-		/* send signal to IA-32 process */
-		if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt))
-			return 0;
-	} else
-		/* send signal to IA-64 process */
-		if (!setup_frame(sig, ka, info, oldset, scr))
-			return 0;
+	if (!setup_frame(sig, ka, info, oldset, scr))
+		return 0;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
@@ -462,7 +455,6 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
 	siginfo_t info;
 	long restart = in_syscall;
 	long errno = scr->pt.r8;
-#	define ERR_CODE(c)	(IS_IA32_PROCESS(&scr->pt) ? -(c) : (c))
 
 	/*
 	 * In the ia64_leave_kernel code path, we want the common case to go fast, which
@@ -490,14 +482,7 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
 		 * inferior call), thus it's important to check for restarting _after_
 		 * get_signal_to_deliver().
 		 */
-		if (IS_IA32_PROCESS(&scr->pt)) {
-			if (in_syscall) {
-				if (errno >= 0)
-					restart = 0;
-				else
-					errno = -errno;
-			}
-		} else if ((long) scr->pt.r10 != -1)
+		if ((long) scr->pt.r10 != -1)
 			/*
 			 * A system calls has to be restarted only if one of the error codes
 			 * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned.  If r10
@@ -513,22 +498,18 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
 			switch (errno) {
 			      case ERESTART_RESTARTBLOCK:
 			      case ERESTARTNOHAND:
-				scr->pt.r8 = ERR_CODE(EINTR);
+				scr->pt.r8 = EINTR;
 				/* note: scr->pt.r10 is already -1 */
 				break;
 
 			      case ERESTARTSYS:
 				if ((ka.sa.sa_flags & SA_RESTART) == 0) {
-					scr->pt.r8 = ERR_CODE(EINTR);
+					scr->pt.r8 = EINTR;
 					/* note: scr->pt.r10 is already -1 */
 					break;
 				}
 			      case ERESTARTNOINTR:
-				if (IS_IA32_PROCESS(&scr->pt)) {
-					scr->pt.r8 = scr->pt.r1;
-					scr->pt.cr_iip -= 2;
-				} else
-					ia64_decrement_ip(&scr->pt);
+				ia64_decrement_ip(&scr->pt);
 				restart = 0; /* don't restart twice if handle_signal() fails... */
 			}
 		}
@@ -555,21 +536,14 @@ ia64_do_signal (struct sigscratch *scr, long in_syscall)
 		if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
 		    || errno == ERESTART_RESTARTBLOCK)
 		{
-			if (IS_IA32_PROCESS(&scr->pt)) {
-				scr->pt.r8 = scr->pt.r1;
-				scr->pt.cr_iip -= 2;
-				if (errno == ERESTART_RESTARTBLOCK)
-					scr->pt.r8 = 0;	/* x86 version of __NR_restart_syscall */
-			} else {
-				/*
-				 * Note: the syscall number is in r15 which is saved in
-				 * pt_regs so all we need to do here is adjust ip so that
-				 * the "break" instruction gets re-executed.
-				 */
-				ia64_decrement_ip(&scr->pt);
-				if (errno == ERESTART_RESTARTBLOCK)
-					scr->pt.r15 = __NR_restart_syscall;
-			}
+			/*
+			 * Note: the syscall number is in r15 which is saved in
+			 * pt_regs so all we need to do here is adjust ip so that
+			 * the "break" instruction gets re-executed.
+			 */
+			ia64_decrement_ip(&scr->pt);
+			if (errno == ERESTART_RESTARTBLOCK)
+				scr->pt.r15 = __NR_restart_syscall;
 		}
 	}
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index de100aa..6a1380e 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -44,7 +44,6 @@
 #include <asm/cache.h>
 #include <asm/current.h>
 #include <asm/delay.h>
-#include <asm/ia32.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/machvec.h>
@@ -391,6 +390,14 @@ smp_callin (void)
 
 	fix_b0_for_bsp();
 
+#ifdef CONFIG_NUMA
+	/*
+	 * numa_node_id() works after this.
+	 */
+	set_numa_node(cpu_to_node_map[cpuid]);
+	set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
+#endif
+
 	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
@@ -443,10 +450,6 @@ smp_callin (void)
 		calibrate_delay();
 	local_cpu_data->loops_per_jiffy = loops_per_jiffy;
 
-#ifdef CONFIG_IA32_SUPPORT
-	ia32_gdt_init();
-#endif
-
 	/*
 	 * Allow the master to continue.
 	 */
@@ -637,6 +640,9 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
+#ifdef CONFIG_NUMA
+	set_numa_node(cpu_to_node_map[smp_processor_id()]);
+#endif
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 	paravirt_post_smp_prepare_boot_cpu();
 }
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index a35c661..653b3c4 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -61,7 +61,7 @@ unsigned long long sched_clock(void)
 
 #ifdef CONFIG_PARAVIRT
 static void
-paravirt_clocksource_resume(void)
+paravirt_clocksource_resume(struct clocksource *cs)
 {
 	if (pv_time_ops.clocksource_resume)
 		pv_time_ops.clocksource_resume();
@@ -430,18 +430,16 @@ static int __init rtc_init(void)
 }
 module_init(rtc_init);
 
+void read_persistent_clock(struct timespec *ts)
+{
+	efi_gettimeofday(ts);
+}
+
 void __init
 time_init (void)
 {
 	register_percpu_irq(IA64_TIMER_VECTOR, &timer_irqaction);
-	efi_gettimeofday(&xtime);
 	ia64_init_itm();
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
-	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 }
 
 /*
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 8f06035..0baa1bb 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/node.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/nodemask.h>
@@ -282,7 +283,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char *
 	return ret;
 }
 
-static struct sysfs_ops cache_sysfs_ops = {
+static const struct sysfs_ops cache_sysfs_ops = {
 	.show   = cache_show
 };
 
@@ -360,12 +361,12 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 		return 0;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (unlikely(retval))
 		return retval;
 
 	retval = cpu_cache_sysfs_init(cpu);
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	if (unlikely(retval < 0))
 		return retval;
 
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index f0cda76..fd80e70 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -19,7 +19,6 @@
 #include <linux/kdebug.h>
 
 #include <asm/fpswa.h>
-#include <asm/ia32.h>
 #include <asm/intrinsics.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
@@ -626,10 +625,6 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa,
 		break;
 
 	      case 45:
-#ifdef CONFIG_IA32_SUPPORT
-		if (ia32_exception(&regs, isr) == 0)
-			return;
-#endif
 		printk(KERN_ERR "Unexpected IA-32 exception (Trap 45)\n");
 		printk(KERN_ERR "  iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx\n",
 		       iip, ifa, isr);
@@ -637,10 +632,6 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa,
 		break;
 
 	      case 46:
-#ifdef CONFIG_IA32_SUPPORT
-		if (ia32_intercept(&regs, isr) == 0)
-			return;
-#endif
 		printk(KERN_ERR "Unexpected IA-32 intercept trap (Trap 46)\n");
 		printk(KERN_ERR "  iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx, iim - 0x%lx\n",
 		       iip, ifa, isr, iim);
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 776dd40..622772b 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
+#include <linux/ratelimit.h>
 
 #include <asm/intrinsics.h>
 #include <asm/processor.h>
@@ -1283,24 +1284,9 @@ emulate_store_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 /*
  * Make sure we log the unaligned access, so that user/sysadmin can notice it and
  * eventually fix the program.  However, we don't want to do that for every access so we
- * pace it with jiffies.  This isn't really MP-safe, but it doesn't really have to be
- * either...
+ * pace it with jiffies.
  */
-static int
-within_logging_rate_limit (void)
-{
-	static unsigned long count, last_time;
-
-	if (time_after(jiffies, last_time + 5 * HZ))
-		count = 0;
-	if (count < 5) {
-		last_time = jiffies;
-		count++;
-		return 1;
-	}
-	return 0;
-
-}
+static DEFINE_RATELIMIT_STATE(logging_rate_limit, 5 * HZ, 5);
 
 void
 ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
@@ -1337,7 +1323,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 
 		if (!no_unaligned_warning &&
 		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
-		    within_logging_rate_limit())
+		    __ratelimit(&logging_rate_limit))
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1370,7 +1356,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			}
 		}
 	} else {
-		if (within_logging_rate_limit()) {
+		if (__ratelimit(&logging_rate_limit)) {
 			printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
 			       ifa, regs->cr_iip + ipsr->ri);
 			if (unaligned_dump_stack)
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index a595823..c4696d2 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -18,9 +18,9 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/efi.h>
 #include <linux/genalloc.h>
+#include <linux/gfp.h>
 #include <asm/page.h>
 #include <asm/pal.h>
 #include <asm/system.h>
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index ef3e7be..fa4d1e5 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -26,6 +26,7 @@ config KVM
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
 	select KVM_APIC_ARCHITECTURE
+	select KVM_MMIO
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
@@ -47,6 +48,7 @@ config KVM_INTEL
 	  Provides support for KVM on Itanium 2 processors equipped with the VT
 	  extensions.
 
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 5fdeec5..21b7013 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -23,8 +23,8 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/percpu.h>
-#include <linux/gfp.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 #include <linux/smp.h>
 #include <linux/kvm_host.h>
 #include <linux/kvm.h>
@@ -144,6 +144,7 @@ int kvm_arch_hardware_enable(void *garbage)
 				VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
+		spin_unlock(&vp_lock);
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
 		return -EINVAL;
 	}
@@ -241,10 +242,10 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 0;
 mmio:
 	if (p->dir)
-		r = kvm_io_bus_read(&vcpu->kvm->mmio_bus, p->addr,
+		r = kvm_io_bus_read(vcpu->kvm, KVM_MMIO_BUS, p->addr,
 				    p->size, &p->data);
 	else
-		r = kvm_io_bus_write(&vcpu->kvm->mmio_bus, p->addr,
+		r = kvm_io_bus_write(vcpu->kvm, KVM_MMIO_BUS, p->addr,
 				     p->size, &p->data);
 	if (r)
 		printk(KERN_ERR"kvm: No iodevice found! addr:%lx\n", p->addr);
@@ -636,12 +637,9 @@ static void kvm_vcpu_post_transition(struct kvm_vcpu *vcpu)
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	union context *host_ctx, *guest_ctx;
-	int r;
+	int r, idx;
 
-	/*
-	 * down_read() may sleep and return with interrupts enabled
-	 */
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 
 again:
 	if (signal_pending(current)) {
@@ -663,7 +661,7 @@ again:
 	if (r < 0)
 		goto vcpu_run_fail;
 
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	kvm_guest_enter();
 
 	/*
@@ -687,7 +685,7 @@ again:
 	kvm_guest_exit();
 	preempt_enable();
 
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 
 	r = kvm_handle_exit(kvm_run, vcpu);
 
@@ -697,10 +695,10 @@ again:
 	}
 
 out:
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	if (r > 0) {
 		kvm_resched(vcpu);
-		down_read(&vcpu->kvm->slots_lock);
+		idx = srcu_read_lock(&vcpu->kvm->srcu);
 		goto again;
 	}
 
@@ -971,7 +969,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		r = kvm_setup_default_irq_routing(kvm);
 		if (r) {
-			kfree(kvm->arch.vioapic);
+			kvm_ioapic_destroy(kvm);
 			goto out;
 		}
 		break;
@@ -982,11 +980,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&irq_event, argp, sizeof irq_event))
 			goto out;
+		r = -ENXIO;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
+				r = -EFAULT;
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
 							sizeof irq_event))
@@ -1377,12 +1377,14 @@ static void free_kvm(struct kvm *kvm)
 
 static void kvm_release_vm_pages(struct kvm *kvm)
 {
+	struct kvm_memslots *slots;
 	struct kvm_memory_slot *memslot;
 	int i, j;
 	unsigned long base_gfn;
 
-	for (i = 0; i < kvm->nmemslots; i++) {
-		memslot = &kvm->memslots[i];
+	slots = kvm_memslots(kvm);
+	for (i = 0; i < slots->nmemslots; i++) {
+		memslot = &slots->memslots[i];
 		base_gfn = memslot->base_gfn;
 
 		for (j = 0; j < memslot->npages; j++) {
@@ -1405,6 +1407,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	kfree(kvm->arch.vioapic);
 	kvm_release_vm_pages(kvm);
 	kvm_free_physmem(kvm);
+	cleanup_srcu_struct(&kvm->srcu);
 	free_kvm(kvm);
 }
 
@@ -1535,8 +1538,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 			goto out;
 
 		if (copy_to_user(user_stack, stack,
-				 sizeof(struct kvm_ia64_vcpu_stack)))
+				 sizeof(struct kvm_ia64_vcpu_stack))) {
+			r = -EFAULT;
 			goto out;
+		}
 
 		break;
 	}
@@ -1576,15 +1581,15 @@ out:
 	return r;
 }
 
-int kvm_arch_set_memory_region(struct kvm *kvm,
-		struct kvm_userspace_memory_region *mem,
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+		struct kvm_memory_slot *memslot,
 		struct kvm_memory_slot old,
+		struct kvm_userspace_memory_region *mem,
 		int user_alloc)
 {
 	unsigned long i;
 	unsigned long pfn;
-	int npages = mem->memory_size >> PAGE_SHIFT;
-	struct kvm_memory_slot *memslot = &kvm->memslots[mem->slot];
+	int npages = memslot->npages;
 	unsigned long base_gfn = memslot->base_gfn;
 
 	if (base_gfn + npages > (KVM_MAX_MEM_SIZE >> PAGE_SHIFT))
@@ -1608,6 +1613,14 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+		struct kvm_userspace_memory_region *mem,
+		struct kvm_memory_slot old,
+		int user_alloc)
+{
+	return;
+}
+
 void kvm_arch_flush_shadow(struct kvm *kvm)
 {
 	kvm_flush_remote_tlbs(kvm);
@@ -1794,7 +1807,8 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
 {
 	struct kvm_memory_slot *memslot;
 	int r, i;
-	long n, base;
+	long base;
+	unsigned long n;
 	unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
 			offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
 
@@ -1802,12 +1816,12 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
 	if (log->slot >= KVM_MEMORY_SLOTS)
 		goto out;
 
-	memslot = &kvm->memslots[log->slot];
+	memslot = &kvm->memslots->memslots[log->slot];
 	r = -ENOENT;
 	if (!memslot->dirty_bitmap)
 		goto out;
 
-	n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+	n = kvm_dirty_bitmap_bytes(memslot);
 	base = memslot->base_gfn / BITS_PER_LONG;
 
 	for (i = 0; i < n/sizeof(long); ++i) {
@@ -1823,10 +1837,11 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		struct kvm_dirty_log *log)
 {
 	int r;
-	int n;
+	unsigned long n;
 	struct kvm_memory_slot *memslot;
 	int is_dirty = 0;
 
+	mutex_lock(&kvm->slots_lock);
 	spin_lock(&kvm->arch.dirty_log_lock);
 
 	r = kvm_ia64_sync_dirty_log(kvm, log);
@@ -1840,12 +1855,13 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
 		kvm_flush_remote_tlbs(kvm);
-		memslot = &kvm->memslots[log->slot];
-		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+		memslot = &kvm->memslots->memslots[log->slot];
+		n = kvm_dirty_bitmap_bytes(memslot);
 		memset(memslot->dirty_bitmap, 0, n);
 	}
 	r = 0;
 out:
+	mutex_unlock(&kvm->slots_lock);
 	spin_unlock(&kvm->arch.dirty_log_lock);
 	return r;
 }
diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index e4b8231..cb548ee 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -75,7 +75,7 @@ static void set_pal_result(struct kvm_vcpu *vcpu,
 	struct exit_ctl_data *p;
 
 	p = kvm_get_exit_data(vcpu);
-	if (p && p->exit_reason == EXIT_REASON_PAL_CALL) {
+	if (p->exit_reason == EXIT_REASON_PAL_CALL) {
 		p->u.pal_data.ret = result;
 		return ;
 	}
@@ -87,7 +87,7 @@ static void set_sal_result(struct kvm_vcpu *vcpu,
 	struct exit_ctl_data *p;
 
 	p = kvm_get_exit_data(vcpu);
-	if (p && p->exit_reason == EXIT_REASON_SAL_CALL) {
+	if (p->exit_reason == EXIT_REASON_SAL_CALL) {
 		p->u.sal_data.ret = result;
 		return ;
 	}
@@ -322,7 +322,7 @@ static  u64 kvm_get_pal_call_index(struct kvm_vcpu *vcpu)
 	struct exit_ctl_data *p;
 
 	p = kvm_get_exit_data(vcpu);
-	if (p && (p->exit_reason == EXIT_REASON_PAL_CALL))
+	if (p->exit_reason == EXIT_REASON_PAL_CALL)
 		index = p->u.pal_data.gr28;
 
 	return index;
@@ -646,18 +646,16 @@ static void kvm_get_sal_call_data(struct kvm_vcpu *vcpu, u64 *in0, u64 *in1,
 
 	p = kvm_get_exit_data(vcpu);
 
-	if (p) {
-		if (p->exit_reason == EXIT_REASON_SAL_CALL) {
-			*in0 = p->u.sal_data.in0;
-			*in1 = p->u.sal_data.in1;
-			*in2 = p->u.sal_data.in2;
-			*in3 = p->u.sal_data.in3;
-			*in4 = p->u.sal_data.in4;
-			*in5 = p->u.sal_data.in5;
-			*in6 = p->u.sal_data.in6;
-			*in7 = p->u.sal_data.in7;
-			return ;
-		}
+	if (p->exit_reason == EXIT_REASON_SAL_CALL) {
+		*in0 = p->u.sal_data.in0;
+		*in1 = p->u.sal_data.in1;
+		*in2 = p->u.sal_data.in2;
+		*in3 = p->u.sal_data.in3;
+		*in4 = p->u.sal_data.in4;
+		*in5 = p->u.sal_data.in5;
+		*in6 = p->u.sal_data.in6;
+		*in7 = p->u.sal_data.in7;
+		return ;
 	}
 	*in0 = 0;
 }
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 9bf55af..fb8f9f5 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -316,8 +316,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma)
 		return;
 	} else {
 		inst_type = -1;
-		panic_vm(vcpu, "Unsupported MMIO access instruction! \
-				Bunld[0]=0x%lx, Bundle[1]=0x%lx\n",
+		panic_vm(vcpu, "Unsupported MMIO access instruction! "
+				"Bunld[0]=0x%lx, Bundle[1]=0x%lx\n",
 				bundle.i64[0], bundle.i64[1]);
 	}
 
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index dce75b70..958815c 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -1639,8 +1639,8 @@ void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val)
 	 * Otherwise panic
 	 */
 	if (val & (IA64_PSR_PK | IA64_PSR_IS | IA64_PSR_VM))
-		panic_vm(vcpu, "Only support guests with vpsr.pk =0 \
-				& vpsr.is=0\n");
+		panic_vm(vcpu, "Only support guests with vpsr.pk =0 "
+				"& vpsr.is=0\n");
 
 	/*
 	 * For those IA64_PSR bits: id/da/dd/ss/ed/ia
diff --git a/arch/ia64/kvm/vmm.c b/arch/ia64/kvm/vmm.c
index 7a62f75..f0b9cac 100644
--- a/arch/ia64/kvm/vmm.c
+++ b/arch/ia64/kvm/vmm.c
@@ -51,7 +51,7 @@ static int __init  kvm_vmm_init(void)
 	vmm_fpswa_interface = fpswa_interface;
 
 	/*Register vmm data to kvm side*/
-	return kvm_init(&vmm_info, 1024, THIS_MODULE);
+	return kvm_init(&vmm_info, 1024, 0, THIS_MODULE);
 }
 
 static void __exit kvm_vmm_exit(void)
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 19c4b21..6162032 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -22,6 +22,7 @@
 #include <linux/acpi.h>
 #include <linux/efi.h>
 #include <linux/nodemask.h>
+#include <linux/slab.h>
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
 #include <asm/meminit.h>
@@ -459,7 +460,7 @@ static void __init initialize_pernode_data(void)
 		cpu = 0;
 		node = node_cpuid[cpu].nid;
 		cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
-			((char *)&per_cpu__ia64_cpu_info - __per_cpu_start));
+			((char *)&ia64_cpu_info - __per_cpu_start));
 		cpu0_cpu_info->node_data = mem_data[node].node_data;
 	}
 #endif /* CONFIG_SMP */
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 19261a9..0799fea 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -148,7 +148,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	if ((vma->vm_flags & mask) != mask)
 		goto bad_area;
 
-  survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault, make
 	 * sure we exit gracefully rather than endlessly redo the
@@ -276,13 +275,7 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 
   out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk(KERN_CRIT "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
 }
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index b0f6157..1841ee7 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -14,7 +14,6 @@
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
 #include <asm/mman.h>
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 7c0d481..ed41759 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -22,7 +22,6 @@
 #include <linux/kexec.h>
 
 #include <asm/dma.h>
-#include <asm/ia32.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/numa.h>
@@ -118,6 +117,7 @@ ia64_init_addr_space (void)
 	 */
 	vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
 	if (vma) {
+		INIT_LIST_HEAD(&vma->anon_vma_chain);
 		vma->vm_mm = current->mm;
 		vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
 		vma->vm_end = vma->vm_start + PAGE_SIZE;
@@ -136,6 +136,7 @@ ia64_init_addr_space (void)
 	if (!(current->personality & MMAP_PAGE_ZERO)) {
 		vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
 		if (vma) {
+			INIT_LIST_HEAD(&vma->anon_vma_chain);
 			vma->vm_mm = current->mm;
 			vma->vm_end = PAGE_SIZE;
 			vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT);
@@ -668,10 +669,6 @@ mem_init (void)
 			fsyscall_table[i] = sys_call_table[i] | 1;
 	}
 	setup_gate();
-
-#ifdef CONFIG_IA32_SUPPORT
-	ia32_mem_init();
-#endif
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index f3de9d7..7b3cdc6 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -22,6 +22,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
@@ -120,7 +121,7 @@ static inline void down_spin(struct spinaphore *ss)
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index df639db7..aa2533a 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -320,9 +320,9 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
 static void __devinit
 pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 {
-	int i, j;
+	int i;
 
-	j = 0;
+	pci_bus_remove_resources(bus);
 	for (i = 0; i < ctrl->windows; i++) {
 		struct resource *res = &ctrl->window[i].resource;
 		/* HP's firmware has a hack to work around a Windows bug.
@@ -330,19 +330,16 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 		if ((res->flags & IORESOURCE_MEM) &&
 		    (res->end - res->start < 16))
 			continue;
-		if (j >= PCI_BUS_NUM_RESOURCES) {
-			dev_warn(&bus->dev,
-				 "ignoring host bridge window %pR (no space)\n",
-				 res);
-			continue;
-		}
-		bus->resource[j++] = res;
+		pci_bus_add_resource(bus, res, 0);
 	}
 }
 
 struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
+pci_acpi_scan_root(struct acpi_pci_root *root)
 {
+	struct acpi_device *device = root->device;
+	int domain = root->segment;
+	int bus = root->secondary.start;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
@@ -452,13 +449,12 @@ EXPORT_SYMBOL(pcibios_bus_to_resource);
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
 	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx];
+	struct resource *devr = &dev->resource[idx], *busr;
 
 	if (!dev->bus)
 		return 0;
-	for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *busr = dev->bus->resource[i];
 
+	pci_bus_for_each_resource(dev->bus, busr, i) {
 		if (!busr || ((busr->flags ^ devr->flags) & type_mask))
 			continue;
 		if ((devr->start) && (devr->start >= busr->start) &&
@@ -547,10 +543,11 @@ pcibios_disable_device (struct pci_dev *dev)
 		acpi_pci_irq_disable(dev);
 }
 
-void
-pcibios_align_resource (void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource (void *data, const struct resource *res,
 		        resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 /*
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index c6d6b62..cad775a 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -19,6 +19,7 @@
 #include <linux/bootmem.h>
 #include <linux/string.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 
 #include <asm/sn/bte.h>
 
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 66f633b..8cdcb17 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -13,6 +13,7 @@
 #include <asm/sn/sn_sal.h>
 #include "xtalk/hubdev.h"
 #include <linux/acpi.h>
+#include <linux/slab.h>
 
 
 /*
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 308e659..4433dd0 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/bootmem.h>
+#include <linux/slab.h>
 #include <asm/sn/types.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/sn_feature_sets.h>
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index ee774c3..98079f2 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -6,6 +6,7 @@
  * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <linux/slab.h>
 #include <asm/sn/types.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/io.h>
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 40d6eed..13c15d9 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -12,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/rculist.h>
+#include <linux/slab.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/intr.h>
diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c
index fbbfb97..ebfdd6a 100644
--- a/arch/ia64/sn/kernel/msi_sn.c
+++ b/arch/ia64/sn/kernel/msi_sn.c
@@ -11,6 +11,7 @@
 #include <linux/pci.h>
 #include <linux/cpumask.h>
 #include <linux/msi.h>
+#include <linux/slab.h>
 
 #include <asm/sn/addrs.h>
 #include <asm/sn/intr.h>
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf9..d00dfc1 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
@@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void)
  * Note:  This stuff is duped here because Altix requires the PCDP to
  * locate a usable VGA device due to lack of proper ACPI support.  Structures
  * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
  */
 
 struct hcdp_uart_desc {
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 55ac3c4..fa1ecee 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -30,7 +30,6 @@
 #include <linux/miscdevice.h>
 #include <linux/utsname.h>
 #include <linux/cpumask.h>
-#include <linux/smp_lock.h>
 #include <linux/nodemask.h>
 #include <linux/smp.h>
 #include <linux/mutex.h>
@@ -629,9 +628,9 @@ static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
 		else {
 			/* migrate the task before calling SAL */ 
 			save_allowed = current->cpus_allowed;
-			set_cpus_allowed(current, cpumask_of_cpu(cpu));
+			set_cpus_allowed_ptr(current, cpumask_of(cpu));
 			sn_hwperf_call_sal(op_info);
-			set_cpus_allowed(current, save_allowed);
+			set_cpus_allowed_ptr(current, &save_allowed);
 		}
 	}
 	r = op_info->ret;
@@ -682,8 +681,7 @@ static int sn_hwperf_map_err(int hwperf_err)
 /*
  * ioctl for "sn_hwperf" misc device
  */
-static int
-sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg)
+static long sn_hwperf_ioctl(struct file *fp, u32 op, unsigned long arg)
 {
 	struct sn_hwperf_ioctl_args a;
 	struct cpuinfo_ia64 *cdata;
@@ -699,8 +697,6 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg)
 	int i;
 	int j;
 
-	unlock_kernel();
-
 	/* only user requests are allowed here */
 	if ((op & SN_HWPERF_OP_MASK) < 10) {
 		r = -EINVAL;
@@ -859,12 +855,11 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg)
 error:
 	vfree(p);
 
-	lock_kernel();
 	return r;
 }
 
 static const struct file_operations sn_hwperf_fops = {
-	.ioctl = sn_hwperf_ioctl,
+	.unlocked_ioctl = sn_hwperf_ioctl,
 };
 
 static struct miscdevice sn_hwperf_dev = {
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 98b6849..a9d310d 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -9,6 +9,7 @@
  * a description of how these routines should be used.
  */
 
+#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <asm/dma.h>
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index d13e5a2..3cb5cf3 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -8,6 +8,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/geo.h>
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index efb4545..4d4536e 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -10,6 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/bitmap.h>
+#include <linux/slab.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/io.h>
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 012f3b8..27faba0 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/addrs.h>
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
index 7a5ae63..f149065 100644
--- a/arch/ia64/uv/kernel/setup.c
+++ b/arch/ia64/uv/kernel/setup.c
@@ -104,7 +104,7 @@ void __init uv_setup(char **cmdline_p)
 		uv_cpu_hub_info(cpu)->lowmem_remap_top =
 			lowmem_redir_base + lowmem_redir_size;
 		uv_cpu_hub_info(cpu)->m_val = m_val;
-		uv_cpu_hub_info(cpu)->n_val = m_val;
+		uv_cpu_hub_info(cpu)->n_val = n_val;
 		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
diff --git a/arch/ia64/xen/grant-table.c b/arch/ia64/xen/grant-table.c
index 777dd9a..48cca37 100644
--- a/arch/ia64/xen/grant-table.c
+++ b/arch/ia64/xen/grant-table.c
@@ -22,6 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 #include <linux/mm.h>
 
 #include <xen/interface/xen.h>
diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S
index e32dae4..08847aa 100644
--- a/arch/ia64/xen/hypercall.S
+++ b/arch/ia64/xen/hypercall.S
@@ -58,11 +58,6 @@ __HCALL2(xen_ptcga, HYPERPRIVOP_PTC_GA)
 __HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR)
 __HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR)
 
-#ifdef CONFIG_IA32_SUPPORT
-__HCALL0(xen_get_eflag, HYPERPRIVOP_GET_EFLAG)
-__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG)	// refer SDM vol1 3.1.8
-#endif /* CONFIG_IA32_SUPPORT */
-
 GLOBAL_ENTRY(xen_set_rr0_to_rr4)
 	mov r8=r32
 	mov r9=r33
diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c
index 5e2270a..8adc6a1 100644
--- a/arch/ia64/xen/xen_pv_ops.c
+++ b/arch/ia64/xen/xen_pv_ops.c
@@ -301,11 +301,6 @@ static void xen_setreg(int regnum, unsigned long val)
 	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_KR7:
 		xen_set_kr(regnum - _IA64_REG_AR_KR0, val);
 		break;
-#ifdef CONFIG_IA32_SUPPORT
-	case _IA64_REG_AR_EFLAG:
-		xen_set_eflag(val);
-		break;
-#endif
 	case _IA64_REG_AR_ITC:
 		xen_set_itc(val);
 		break;
@@ -332,11 +327,6 @@ static unsigned long xen_getreg(int regnum)
 	case _IA64_REG_PSR:
 		res = xen_get_psr();
 		break;
-#ifdef CONFIG_IA32_SUPPORT
-	case _IA64_REG_AR_EFLAG:
-		res = xen_get_eflag();
-		break;
-#endif
 	case _IA64_REG_AR_ITC:
 		res = xen_get_itc();
 		break;
@@ -710,9 +700,6 @@ extern unsigned long xen_getreg(int regnum);
 
 __DEFINE_FUNC(getreg,
 	      __DEFINE_GET_REG(PSR, PSR)
-#ifdef CONFIG_IA32_SUPPORT
-	      __DEFINE_GET_REG(AR_EFLAG, EFLAG)
-#endif
 
 	      /* get_itc */
 	      "mov r2 = " __stringify(_IA64_REG_AR_ITC) "\n"
@@ -789,9 +776,6 @@ __DEFINE_FUNC(setreg,
 	      ";;\n"
 	      "(p6) br.cond.spnt xen_set_itc\n"
 
-#ifdef CONFIG_IA32_SUPPORT
-	      __DEFINE_SET_REG(AR_EFLAG, SET_EFLAG)
-#endif
 	      __DEFINE_SET_REG(CR_TPR, SET_TPR)
 	      __DEFINE_SET_REG(CR_EOI, EOI)
 
diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h
index 63f0cf0..d44a51e 100644
--- a/arch/m32r/include/asm/atomic.h
+++ b/arch/m32r/include/asm/atomic.h
@@ -26,7 +26,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable
diff --git a/arch/m32r/include/asm/local.h b/arch/m32r/include/asm/local.h
index 22256d1..734bca8 100644
--- a/arch/m32r/include/asm/local.h
+++ b/arch/m32r/include/asm/local.h
@@ -338,29 +338,4 @@ static inline void local_set_mask(unsigned long  mask, local_t *addr)
  * a variable, not an address.
  */
 
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non local way. */
-#define cpu_local_wrap_v(l)	 	\
-	({ local_t res__;		\
-	   preempt_disable(); 		\
-	   res__ = (l);			\
-	   preempt_enable();		\
-	   res__; })
-#define cpu_local_wrap(l)		\
-	({ preempt_disable();		\
-	   l;				\
-	   preempt_enable(); })		\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l)	cpu_local_inc(l)
-#define __cpu_local_dec(l)	cpu_local_dec(l)
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
 #endif /* __M32R_LOCAL_H */
diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h
index a0755b9..840a123 100644
--- a/arch/m32r/include/asm/ptrace.h
+++ b/arch/m32r/include/asm/ptrace.h
@@ -120,6 +120,8 @@ struct pt_regs {
 
 #include <asm/m32r.h>		/* M32R_PSW_BSM, M32R_PSW_BPM */
 
+#define arch_has_single_step() (1)
+
 struct task_struct;
 extern void init_debug_traps(struct task_struct *);
 #define arch_ptrace_attach(child) \
diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
index 1ed372c..aeeddd8 100644
--- a/arch/m32r/include/asm/scatterlist.h
+++ b/arch/m32r/include/asm/scatterlist.h
@@ -1,20 +1,7 @@
 #ifndef _ASM_M32R_SCATTERLIST_H
 #define _ASM_M32R_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    char *  address;    /* Location data is to be transferred to, NULL for
-                         * highmem page */
-    unsigned long page_link;
-    unsigned int offset;/* for highmem, page offset */
-
-    dma_addr_t dma_address;
-    unsigned int length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x1fffffff)
 
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index ed240b6..71faff5 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -142,7 +142,7 @@ static inline unsigned int get_thread_fault_code(void)
 #define TIF_RESTORE_SIGMASK	8	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18	/* OOM killer killed process */
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
diff --git a/arch/m32r/include/asm/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
index 0ef9530..92614b0 100644
--- a/arch/m32r/include/asm/tlbflush.h
+++ b/arch/m32r/include/asm/tlbflush.h
@@ -92,6 +92,6 @@ static __inline__ void __flush_tlb_all(void)
 	);
 }
 
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
 
 #endif	/* _ASM_M32R_TLBFLUSH_H */
diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h
index cf701c9..7612577 100644
--- a/arch/m32r/include/asm/unistd.h
+++ b/arch/m32r/include/asm/unistd.h
@@ -339,6 +339,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_TIME
 #define __ARCH_WANT_SYS_UTIME
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 67a01e1..bc8c8c1 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -21,10 +21,10 @@
  */
 
 #include <linux/fs.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/hardirq.h>
 
 #include <asm/io.h>
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 98682bb..e555091 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -580,6 +580,35 @@ init_debug_traps(struct task_struct *child)
 	}
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long next_pc;
+	unsigned long pc, insn;
+
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+	/* Compute next pc.  */
+	pc = get_stack_long(child, PT_BPC);
+
+	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
+	    != sizeof(insn))
+		break;
+
+	compute_next_pc(insn, pc, &next_pc, child);
+	if (next_pc & 0x80000000)
+		break;
+
+	if (embed_debug_trap(child, next_pc))
+		break;
+
+	invalidate_cache();
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	unregister_all_debug_traps(child);
+	invalidate_cache();
+}
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -630,74 +659,6 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_write_user(child, addr, data);
 		break;
 
-	/*
-	 * continue/restart and stop at next (return from) syscall
-	 */
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL: {
-		ret = 0;
-		unregister_all_debug_traps(child);
-		invalidate_cache();
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	/*
-	 * execute single instruction.
-	 */
-	case PTRACE_SINGLESTEP: {
-		unsigned long next_pc;
-		unsigned long pc, insn;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		/* Compute next pc.  */
-		pc = get_stack_long(child, PT_BPC);
-
-		if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
-		    != sizeof(insn))
-			break;
-
-		compute_next_pc(insn, pc, &next_pc, child);
-		if (next_pc & 0x80000000)
-			break;
-
-		if (embed_debug_trap(child, next_pc))
-			break;
-
-		invalidate_cache();
-		child->exit_code = data;
-
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *)data);
 		break;
diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c
index d3c865c..0a00f46 100644
--- a/arch/m32r/kernel/sys_m32r.c
+++ b/arch/m32r/kernel/sys_m32r.c
@@ -76,98 +76,6 @@ asmlinkage int sys_tas(int __user *addr)
 	return oldval;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-		}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-			}
-		default:
-			return sys_msgrcv (first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second,
-				   (struct msqid_ds __user *) ptr);
-	case SHMAT: {
-		ulong raddr;
-
-		if (!access_ok(VERIFY_WRITE, (ulong __user *) third,
-				      sizeof(ulong)))
-			return -EFAULT;
-		ret = do_shmat (first, (char __user *) ptr, second, &raddr);
-		if (ret)
-			return ret;
-		return put_user (raddr, (ulong __user *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-asmlinkage int sys_uname(struct old_utsname __user * name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
 asmlinkage int sys_cacheflush(void *addr, int bytes, int cache)
 {
 	/* This should flush more selectively ...  */
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 9cedcef..bda8682 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -106,24 +106,6 @@ u32 arch_gettimeoffset(void)
 }
 
 /*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return 0;
-}
-
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
-
-/*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
@@ -138,23 +120,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));
 #endif
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	write_seqlock(&xtime_lock);
-	if (ntp_synced()
-		&& xtime.tv_sec > last_rtc_update + 660
-		&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
-		&& (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2)
-	{
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else	/* do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-	write_sequnlock(&xtime_lock);
 	/* As we return to user mode fire off the other CPU schedulers..
 	   this is basically because we don't yet share IRQ's around.
 	   This message is rigged to be safe on the 386 - basically it's
@@ -174,7 +139,7 @@ static struct irqaction irq0 = {
 	.name = "MFT2",
 };
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int epoch, year, mon, day, hour, min, sec;
 
@@ -194,11 +159,13 @@ void __init time_init(void)
 		epoch = 1952;
 	year += epoch;
 
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+}
 
+
+void __init time_init(void)
+{
 #if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
 	|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
 	|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
diff --git a/arch/m32r/mm/fault-nommu.c b/arch/m32r/mm/fault-nommu.c
index 8846917..888aab1 100644
--- a/arch/m32r/mm/fault-nommu.c
+++ b/arch/m32r/mm/fault-nommu.c
@@ -95,7 +95,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
  * update_mmu_cache()
  *======================================================================*/
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t pte)
+	pte_t *ptep)
 {
 	BUG();
 }
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 7274b47..b8ec002 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -188,7 +188,6 @@ good_area:
 	if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
 	  goto bad_area;
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (error_code & ACE_USERMODE)
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!(error_code & ACE_USERMODE))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
@@ -336,7 +330,7 @@ vmalloc_fault:
 
 		addr = (address & PAGE_MASK);
 		set_thread_fault_code(error_code);
-		update_mmu_cache(NULL, addr, *pte_k);
+		update_mmu_cache(NULL, addr, pte_k);
 		set_thread_fault_code(0);
 		return;
 	}
@@ -349,7 +343,7 @@ vmalloc_fault:
 #define ITLB_END	(unsigned long *)(ITLB_BASE + (NR_TLB_ENTRIES * 8))
 #define DTLB_END	(unsigned long *)(DTLB_BASE + (NR_TLB_ENTRIES * 8))
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
-	pte_t pte)
+	pte_t *ptep)
 {
 	volatile unsigned long *entry1, *entry2;
 	unsigned long pte_data, flags;
@@ -365,7 +359,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr,
 
 	vaddr = (vaddr & PAGE_MASK) | get_asid();
 
-	pte_data = pte_val(pte);
+	pte_data = pte_val(*ptep);
 
 #ifdef CONFIG_CHIP_OPSP
 	entry1 = (unsigned long *)ITLB_BASE;
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 9f581df..73e2205 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -19,6 +19,7 @@
 #include <linux/bitops.h>
 #include <linux/nodemask.h>
 #include <linux/pfn.h>
+#include <linux/gfp.h>
 #include <asm/types.h>
 #include <asm/processor.h>
 #include <asm/page.h>
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ecdc19a..2e3737b 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,7 @@ config M68K
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select GENERIC_ATOMIC64
 
 config MMU
 	bool
@@ -536,10 +537,6 @@ config GVPIOEXT_PLIP
 	  Say Y to enable doing IP over the parallel port on your GVP
 	  IO-Extender card, N otherwise.
 
-config MAC_SCC
-	tristate "Macintosh serial support"
-	depends on MAC
-
 config MAC_HID
 	bool
 	depends on INPUT_ADBHID
@@ -595,7 +592,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+	depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
diff --git a/arch/m68k/amiga/Makefile b/arch/m68k/amiga/Makefile
index 6a0d765..11dd30b 100644
--- a/arch/m68k/amiga/Makefile
+++ b/arch/m68k/amiga/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-obj-y		:= config.o amiints.o cia.o chipram.o amisound.o
+obj-y		:= config.o amiints.o cia.o chipram.o amisound.o platform.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 6c74751..b1577f7 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -97,10 +97,6 @@ static void amiga_get_model(char *model);
 static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
 static unsigned long amiga_gettimeoffset(void);
-static int a3000_hwclk(int, struct rtc_time *);
-static int a2000_hwclk(int, struct rtc_time *);
-static int amiga_set_clock_mmss(unsigned long);
-static unsigned int amiga_get_ss(void);
 extern void amiga_mksound(unsigned int count, unsigned int ticks);
 static void amiga_reset(void);
 extern void amiga_init_sound(void);
@@ -138,10 +134,6 @@ static struct {
 	}
 };
 
-static struct resource rtc_resource = {
-	.start = 0x00dc0000, .end = 0x00dcffff
-};
-
 static struct resource ram_resource[NUM_MEMINFO];
 
 
@@ -387,15 +379,6 @@ void __init config_amiga(void)
 	mach_get_model       = amiga_get_model;
 	mach_get_hardware_list = amiga_get_hardware_list;
 	mach_gettimeoffset   = amiga_gettimeoffset;
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		mach_hwclk         = a3000_hwclk;
-		rtc_resource.name = "A3000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		mach_hwclk         = a2000_hwclk;
-		rtc_resource.name = "A2000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	}
 
 	/*
 	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -404,8 +387,6 @@ void __init config_amiga(void)
 	 */
 	mach_max_dma_address = 0xffffffff;
 
-	mach_set_clock_mmss  = amiga_set_clock_mmss;
-	mach_get_ss          = amiga_get_ss;
 	mach_reset           = amiga_reset;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep            = amiga_mksound;
@@ -480,7 +461,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 	static struct resource sched_res = {
 		.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
 	};
-	jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
+	jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
 
 	if (request_resource(&mb_resources._ciab, &sched_res))
 		printk("Cannot allocate ciab.ta{lo,hi}\n");
@@ -530,161 +511,6 @@ static unsigned long amiga_gettimeoffset(void)
 	return ticks + offset;
 }
 
-static int a3000_hwclk(int op, struct rtc_time *t)
-{
-	tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_3000.second1 * 10 + tod_3000.second2;
-		t->tm_min  = tod_3000.minute1 * 10 + tod_3000.minute2;
-		t->tm_hour = tod_3000.hour1   * 10 + tod_3000.hour2;
-		t->tm_mday = tod_3000.day1    * 10 + tod_3000.day2;
-		t->tm_wday = tod_3000.weekday;
-		t->tm_mon  = tod_3000.month1  * 10 + tod_3000.month2 - 1;
-		t->tm_year = tod_3000.year1   * 10 + tod_3000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-	} else {
-		tod_3000.second1 = t->tm_sec / 10;
-		tod_3000.second2 = t->tm_sec % 10;
-		tod_3000.minute1 = t->tm_min / 10;
-		tod_3000.minute2 = t->tm_min % 10;
-		tod_3000.hour1   = t->tm_hour / 10;
-		tod_3000.hour2   = t->tm_hour % 10;
-		tod_3000.day1    = t->tm_mday / 10;
-		tod_3000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_3000.weekday = t->tm_wday;
-		tod_3000.month1  = (t->tm_mon + 1) / 10;
-		tod_3000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_3000.year1   = t->tm_year / 10;
-		tod_3000.year2   = t->tm_year % 10;
-	}
-
-	tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-
-	return 0;
-}
-
-static int a2000_hwclk(int op, struct rtc_time *t)
-{
-	int cnt = 5;
-
-	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
-
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-		udelay(70);
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-		--cnt;
-	}
-
-	if (!cnt)
-		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
-			tod_2000.cntrl1);
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_2000.second1     * 10 + tod_2000.second2;
-		t->tm_min  = tod_2000.minute1     * 10 + tod_2000.minute2;
-		t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2;
-		t->tm_mday = tod_2000.day1        * 10 + tod_2000.day2;
-		t->tm_wday = tod_2000.weekday;
-		t->tm_mon  = tod_2000.month1      * 10 + tod_2000.month2 - 1;
-		t->tm_year = tod_2000.year1       * 10 + tod_2000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-
-		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
-			if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
-				t->tm_hour = 0;
-			else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
-				t->tm_hour += 12;
-		}
-	} else {
-		tod_2000.second1 = t->tm_sec / 10;
-		tod_2000.second2 = t->tm_sec % 10;
-		tod_2000.minute1 = t->tm_min / 10;
-		tod_2000.minute2 = t->tm_min % 10;
-		if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)
-			tod_2000.hour1 = t->tm_hour / 10;
-		else if (t->tm_hour >= 12)
-			tod_2000.hour1 = TOD2000_HOUR1_PM +
-				(t->tm_hour - 12) / 10;
-		else
-			tod_2000.hour1 = t->tm_hour / 10;
-		tod_2000.hour2   = t->tm_hour % 10;
-		tod_2000.day1    = t->tm_mday / 10;
-		tod_2000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_2000.weekday = t->tm_wday;
-		tod_2000.month1  = (t->tm_mon + 1) / 10;
-		tod_2000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_2000.year1   = t->tm_year / 10;
-		tod_2000.year2   = t->tm_year % 10;
-	}
-
-	tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-
-	return 0;
-}
-
-static int amiga_set_clock_mmss(unsigned long nowtime)
-{
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-		tod_3000.second1 = real_seconds / 10;
-		tod_3000.second2 = real_seconds % 10;
-		tod_3000.minute1 = real_minutes / 10;
-		tod_3000.minute2 = real_minutes % 10;
-
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		int cnt = 5;
-
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-			udelay(70);
-			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-			--cnt;
-		}
-
-		if (!cnt)
-			printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
-		tod_2000.second1 = real_seconds / 10;
-		tod_2000.second2 = real_seconds % 10;
-		tod_2000.minute1 = real_minutes / 10;
-		tod_2000.minute2 = real_minutes % 10;
-
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	}
-
-	return 0;
-}
-
-static unsigned int amiga_get_ss(void)
-{
-	unsigned int s;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-		s = tod_3000.second1 * 10 + tod_3000.second2;
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		s = tod_2000.second1 * 10 + tod_2000.second2;
-	}
-	return s;
-}
-
 static NORET_TYPE void amiga_reset(void)
     ATTRIB_NORET;
 
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
new file mode 100644
index 0000000..7fd8b41
--- /dev/null
+++ b/arch/m68k/amiga/platform.c
@@ -0,0 +1,197 @@
+/*
+ *  Copyright (C) 2007-2009 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigayle.h>
+
+
+#ifdef CONFIG_ZORRO
+
+static const struct resource zorro_resources[] __initconst = {
+	/* Zorro II regions (on Zorro II/III) */
+	{
+		.name	= "Zorro II exp",
+		.start	= 0x00e80000,
+		.end	= 0x00efffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro II mem",
+		.start	= 0x00200000,
+		.end	= 0x009fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* Zorro III regions (on Zorro III only) */
+	{
+		.name	= "Zorro III exp",
+		.start	= 0xff000000,
+		.end	= 0xffffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro III cfg",
+		.start	= 0x40000000,
+		.end	= 0x7fffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+
+static int __init amiga_init_bus(void)
+{
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
+		return -ENODEV;
+
+	platform_device_register_simple("amiga-zorro", -1, zorro_resources,
+					AMIGAHW_PRESENT(ZORRO3) ? 4 : 2);
+	return 0;
+}
+
+subsys_initcall(amiga_init_bus);
+
+
+static int z_dev_present(zorro_id id)
+{
+	unsigned int i;
+
+	for (i = 0; i < zorro_num_autocon; i++)
+		if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) &&
+		    zorro_autocon[i].rom.er_Product == ZORRO_PROD(id))
+			return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_ZORRO */
+
+static inline int z_dev_present(zorro_id id) { return 0; }
+
+#endif /* !CONFIG_ZORRO */
+
+
+static const struct resource a3000_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd00ff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a4000t_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a1200_ide_resource __initconst = {
+	.start	= 0xda0000,
+	.end	= 0xda1fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
+	.base		= 0xda0000,
+	.irqport	= 0xda9000,
+	.explicit_ack	= 1,
+};
+
+
+static const struct resource a4000_ide_resource __initconst = {
+	.start	= 0xdd2000,
+	.end	= 0xdd3fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
+	.base		= 0xdd2020,
+	.irqport	= 0xdd3020,
+	.explicit_ack	= 0,
+};
+
+
+static const struct resource amiga_rtc_resource __initconst = {
+	.start	= 0x00dc0000,
+	.end	= 0x00dcffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static int __init amiga_init_devices(void)
+{
+	struct platform_device *pdev;
+
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	/* video hardware */
+	if (AMIGAHW_PRESENT(AMI_VIDEO))
+		platform_device_register_simple("amiga-video", -1, NULL, 0);
+
+
+	/* sound hardware */
+	if (AMIGAHW_PRESENT(AMI_AUDIO))
+		platform_device_register_simple("amiga-audio", -1, NULL, 0);
+
+
+	/* storage interfaces */
+	if (AMIGAHW_PRESENT(AMI_FLOPPY))
+		platform_device_register_simple("amiga-floppy", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(A3000_SCSI))
+		platform_device_register_simple("amiga-a3000-scsi", -1,
+						&a3000_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A4000_SCSI))
+		platform_device_register_simple("amiga-a4000t-scsi", -1,
+						&a4000t_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A1200_IDE) ||
+	    z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a1200_ide_resource, 1);
+		platform_device_add_data(pdev, &a1200_ide_pdata,
+					 sizeof(a1200_ide_pdata));
+	}
+
+	if (AMIGAHW_PRESENT(A4000_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a4000_ide_resource, 1);
+		platform_device_add_data(pdev, &a4000_ide_pdata,
+					 sizeof(a4000_ide_pdata));
+	}
+
+
+	/* other I/O hardware */
+	if (AMIGAHW_PRESENT(AMI_KEYBOARD))
+		platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_MOUSE))
+		platform_device_register_simple("amiga-mouse", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_SERIAL))
+		platform_device_register_simple("amiga-serial", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_PARALLEL))
+		platform_device_register_simple("amiga-parallel", -1, NULL, 0);
+
+
+	/* real time clocks */
+	if (AMIGAHW_PRESENT(A2000_CLK))
+		platform_device_register_simple("rtc-msm6242", -1,
+						&amiga_rtc_resource, 1);
+
+	if (AMIGAHW_PRESENT(A3000_CLK))
+		platform_device_register_simple("rtc-rp5c01", -1,
+						&amiga_rtc_resource, 1);
+
+	return 0;
+}
+
+device_initcall(amiga_init_devices);
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d..5890897 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state;
  * bytes have been lost and in which state of the packet structure we are now.
  * This usually causes keyboards bytes to be interpreted as mouse movements
  * and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
  * introduced the RESYNC state for IKBD data. In this state, the bytes up to
  * one that really looks like a key event (0x04..0xf2) or the start of a mouse
  * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
index c50bec8..cb8617b 100644
--- a/arch/m68k/bvme6000/rtc.c
+++ b/arch/m68k/bvme6000/rtc.c
@@ -9,8 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -36,10 +34,9 @@
 static unsigned char days_in_mo[] =
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
-static char rtc_status;
+static atomic_t rtc_status = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 	unsigned char msr;
@@ -133,29 +130,20 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	if(rtc_status) {
-		unlock_kernel();
+	if (!atomic_dec_and_test(&rtc_status)) {
+		atomic_inc(&rtc_status);
 		return -EBUSY;
 	}
-
-	rtc_status = 1;
-	unlock_kernel();
 	return 0;
 }
 
 static int rtc_release(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	rtc_status = 0;
-	unlock_kernel();
+	atomic_inc(&rtc_status);
 	return 0;
 }
 
@@ -164,9 +152,9 @@ static int rtc_release(struct inode *inode, struct file *file)
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev = {
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 9991b64..c5f3232 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -701,6 +701,11 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -834,9 +839,7 @@ CONFIG_HIDRAW=y
 #
 # Character devices
 #
-CONFIG_MAC_SCC=y
 CONFIG_MAC_HID=y
-CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 69c43e2..a8bfa3f 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -822,6 +822,11 @@ CONFIG_A2232=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -982,7 +987,6 @@ CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
-CONFIG_MAC_SCC=y
 CONFIG_MAC_HID=y
 CONFIG_MVME147_SCC=y
 CONFIG_SERIAL167=y
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index f5b3d09..7b98242 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1,4 +1,2 @@
 extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset (void);
-
-
+extern unsigned long hp300_gettimeoffset(void);
diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h
index bb5a6aa..a01453d 100644
--- a/arch/m68k/include/asm/amigayle.h
+++ b/arch/m68k/include/asm/amigayle.h
@@ -104,4 +104,10 @@ struct GAYLE {
 #define GAYLE_CFG_250NS		0x00
 #define GAYLE_CFG_720NS		0x0c
 
+struct gayle_ide_platform_data {
+	unsigned long base;
+	unsigned long irqport;
+	int explicit_ack;	/* A1200 IDE needs explicit ack */
+};
+
 #endif /* asm-m68k/amigayle.h */
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
index 8d29145..eab36dc 100644
--- a/arch/m68k/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic.h
@@ -3,3 +3,5 @@
 #else
 #include "atomic_mm.h"
 #endif
+
+#include <asm-generic/atomic64.h>
diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h
index 88b7af2..6a223b3 100644
--- a/arch/m68k/include/asm/atomic_mm.h
+++ b/arch/m68k/include/asm/atomic_mm.h
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static inline void atomic_add(int i, atomic_t *v)
@@ -148,14 +148,18 @@ static inline int atomic_xchg(atomic_t *v, int new)
 static inline int atomic_sub_and_test(int i, atomic_t *v)
 {
 	char c;
-	__asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "id" (i));
 	return c != 0;
 }
 
 static inline int atomic_add_negative(int i, atomic_t *v)
 {
 	char c;
-	__asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
+	__asm__ __volatile__("addl %2,%1; smi %0"
+			     : "=d" (c), "+m" (*v)
+			     : "id" (i));
 	return c != 0;
 }
 
diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h
index 5674cb9..289310c 100644
--- a/arch/m68k/include/asm/atomic_no.h
+++ b/arch/m68k/include/asm/atomic_no.h
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static __inline__ void atomic_add(int i, atomic_t *v)
diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h
index 9bde784..b4ecdaa 100644
--- a/arch/m68k/include/asm/bitops_mm.h
+++ b/arch/m68k/include/asm/bitops_mm.h
@@ -365,6 +365,10 @@ static inline int minix_test_bit(int nr, const void *vaddr)
 #define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit(nr, addr)		__test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_find_next_zero_bit(addr, size, offset) \
+	generic_find_next_zero_le_bit((unsigned long *)addr, size, offset)
+#define ext2_find_next_bit(addr, size, offset) \
+	generic_find_next_le_bit((unsigned long *)addr, size, offset)
 
 static inline int ext2_test_bit(int nr, const void *vaddr)
 {
@@ -394,10 +398,9 @@ static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
-					  unsigned offset)
+static inline unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 
@@ -437,10 +440,9 @@ static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
-				     unsigned offset)
+static inline unsigned long generic_find_next_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index fed3fd3..ecafbe1 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -8,4 +8,6 @@
 #define        L1_CACHE_SHIFT  4
 #define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #endif
diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h
index b9215a0..0a21da8 100644
--- a/arch/m68k/include/asm/fbio.h
+++ b/arch/m68k/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5..6e2413e 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
  * memory location directly.
  */
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
  */
 
 /*
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index ed2b69b..db824a4 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -113,6 +113,7 @@
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_QSPI                   (0xA4034)
 #define MCF_GPIO_PAR_FEC                    (0xA4038)
 
 #define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index a34894c..e8d06b2 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -127,5 +127,10 @@
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
 
+/*
+ * Pin Assignment
+*/
+#define	MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
+#define	MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 14bce87..79b7b40 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -69,10 +69,12 @@
 #define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+#define	MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
 
 /*
  *	Define system peripheral IRQ usage.
  */
+#define	MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 453356d..1feb46f 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -31,6 +31,7 @@
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
 
 /*
@@ -120,6 +121,9 @@
 #define MCFGPIO_PIN_MAX			100
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
 #endif
 
 #ifdef CONFIG_M5275
@@ -212,6 +216,8 @@
 #define MCFGPIO_PIN_MAX			148
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10007E)
 #endif
 
 /*
@@ -223,6 +229,7 @@
 #define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
 
 
+
 /*
  *	GPIO pins setups to enable the UARTs.
  */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index e2ad1f4..891cbed 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -29,6 +29,7 @@
 
 #define	MCFINT_VECBASE		64		/* Vector base number */
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
 
 /*
@@ -249,70 +250,4 @@
 #define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
 
 
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
-#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT                           (0x8000)
-#define MCF5282_QSPI_QWR_WREN                           (0x4000)
-#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
-#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
-#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
-#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
-#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT                           (0x8000)
-#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
-#define MCF5282_QSPI_QCR_DT                             (0x2000)
-#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
-#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
-
-/****************************************************************************/
 #endif	/* m528xsim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 36bf15a..c4bf1c8 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -17,6 +17,7 @@
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 
 #define MCF_WTM_WCR	MCF_REG16(0xFC098000)
 
diff --git a/arch/m68k/include/asm/machw.h b/arch/m68k/include/asm/machw.h
index 2b4de0c..a220951 100644
--- a/arch/m68k/include/asm/machw.h
+++ b/arch/m68k/include/asm/machw.h
@@ -21,29 +21,4 @@
 #define VIDEOMEMSIZE	(4096*1024)
 #define VIDEOMEMMASK	(-4096*1024)
 
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-#if 0
-/*
-** SCC Z8530
-*/
-
-#define MAC_SCC_BAS (0x50F04000)
-struct MAC_SCC
- {
-  u_char cha_a_ctrl;
-  u_char char_dummy1;
-  u_char cha_a_data;
-  u_char char_dummy2;
-  u_char cha_b_ctrl;
-  u_char char_dummy3;
-  u_char cha_b_data;
- };
-# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
-#endif
-
-#endif /* __ASSEMBLY__ */
-
 #endif /* linux/machw.h */
diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h
index 679c48a..ebe1b70 100644
--- a/arch/m68k/include/asm/macints.h
+++ b/arch/m68k/include/asm/macints.h
@@ -37,7 +37,6 @@
 
 #define VIA1_SOURCE_BASE	8
 #define VIA2_SOURCE_BASE	16
-#define MAC_SCC_SOURCE_BASE	24
 #define PSC3_SOURCE_BASE	24
 #define PSC4_SOURCE_BASE	32
 #define PSC5_SOURCE_BASE	40
@@ -96,26 +95,12 @@
 #define IRQ_PSC3_2	  (26)
 #define IRQ_PSC3_3	  (27)
 
-/* Level 4 (SCC) interrupts */
-#define IRQ_SCC		     (32)
-#define IRQ_SCCA	     (33)
-#define IRQ_SCCB	     (34)
-#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
-/* SCC interrupts */
-#define IRQ_SCCB_TX	     (32)
-#define IRQ_SCCB_STAT	     (33)
-#define IRQ_SCCB_RX	     (34)
-#define IRQ_SCCB_SPCOND	     (35)
-#define IRQ_SCCA_TX	     (36)
-#define IRQ_SCCA_STAT	     (37)
-#define IRQ_SCCA_RX	     (38)
-#define IRQ_SCCA_SPCOND	     (39)
-#endif
-
 /* Level 4 (PSC, AV Macs only) interrupts */
 #define IRQ_PSC4_0	  (32)
 #define IRQ_PSC4_1	  (33)
+#define IRQ_MAC_SCC_A	  IRQ_PSC4_1
 #define IRQ_PSC4_2	  (34)
+#define IRQ_MAC_SCC_B	  IRQ_PSC4_2
 #define IRQ_PSC4_3	  (35)
 #define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
 
@@ -146,6 +131,9 @@
 #define IRQ_BABOON_2	  (66)
 #define IRQ_BABOON_3	  (67)
 
+/* On non-PSC machines, the serial ports share an IRQ */
+#define IRQ_MAC_SCC	  IRQ_AUTO_4
+
 #define SLOT2IRQ(x)	  (x + 47)
 #define IRQ2SLOT(x)	  (x - 47)
 
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
new file mode 100644
index 0000000..39d90d5
--- /dev/null
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -0,0 +1,64 @@
+/*
+ * Definitions for Freescale Coldfire QSPI module
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+*/
+
+#ifndef mcfqspi_h
+#define mcfqspi_h
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#elif defined(CONFIG_M5249)
+#define MCFQSPI_IOBASE		(MCF_MBAR + 0x300)
+#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#define MCFQSPI_IOBASE		0xFC058000
+#endif
+#define MCFQSPI_IOSIZE		0x40
+
+/**
+ * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
+ * @setup: setup the control; allocate gpio's, etc. May be NULL.
+ * @teardown: finish with the control; free gpio's, etc. May be NULL.
+ * @select: output the signals to select the device.  Can not be NULL.
+ * @deselect: output the signals to deselect the device. Can not be NULL.
+ *
+ * The QSPI module has 4 hardware chip selects.  We don't use them.  Instead
+ * platforms are required to supply a mcfqspi_cs_control as a part of the
+ * platform data for each QSPI master controller.  Only the select and
+ * deselect functions are required.
+*/
+struct mcfqspi_cs_control {
+	int 	(*setup)(struct mcfqspi_cs_control *);
+	void	(*teardown)(struct mcfqspi_cs_control *);
+	void	(*select)(struct mcfqspi_cs_control *, u8, bool);
+	void	(*deselect)(struct mcfqspi_cs_control *, u8, bool);
+};
+
+/**
+ * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
+ * @bus_num: board specific identifier for this qspi driver.
+ * @num_chipselects: number of chip selects supported by this qspi driver.
+ * @cs_control: platform dependent chip select control.
+*/
+struct mcfqspi_platform_data {
+	s16	bus_num;
+	u16	num_chipselect;
+	struct mcfqspi_cs_control *cs_control;
+};
+
+#endif /* mcfqspi_h */
diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
deleted file mode 100644
index 527bea5..0000000
--- a/arch/m68k/include/asm/mcfsmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsmc_h
-#define	mcfsmc_h
-/****************************************************************************/
-
-/*
- *	None of the current ColdFire targets that use the SMC91x111
- *	allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef	outb
-#undef	inb
-#undef	outw
-#undef	outwd
-#undef	inw	
-#undef	outl
-#undef	inl
-
-#undef	outsb
-#undef	outsw
-#undef	outsl
-#undef	insb
-#undef	insw
-#undef	insl
-
-/*
- *	Re-defines for ColdFire environment... The SMC part is
- *	mapped into memory space, so remap the PC-style in/out
- *	routines to handle that.
- */
-#define	outb	smc_outb
-#define	inb	smc_inb
-#define	outw	smc_outw
-#define	outwd	smc_outwd
-#define	inw	smc_inw
-#define	outl	smc_outl
-#define	inl	smc_inl
-
-#define	outsb	smc_outsb
-#define	outsw	smc_outsw
-#define	outsl	smc_outsl
-#define	insb	smc_insb
-#define	insw	smc_insw
-#define	insl	smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) (addr & ~0x1));
-	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) addr);
-	return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
-	*((volatile unsigned long *) addr) = 
-		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
-		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- *	The rep* functions are used to feed the data port with
- *	raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-
-	/* Copy as words for as long as possible */
-	for (ebuf = buf + (len >> 1); (buf < ebuf); )
-		*buf++ = *rp;
-
-	/* Lastly, handle left over byte */
-	if (len & 0x1)
-		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- *	Re-map the address space of at least one of the SMC ethernet
- *	parts. Both parts power up decoding the same address, so we
- *	need to move one of them first, before doing enything else.
- *
- *	We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
-	static int		once = 0;
-	extern unsigned short	ppdata;
-	if (once++ == 0) {
-		*((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
-		ppdata |= 0x0080;
-		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0067, ioaddr + BASE);
-
-		ppdata &= ~0x0080;
-		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
-	}
-	
-	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif	/* mcfsmc_h */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index ef22938..01a8716 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -212,5 +212,10 @@ struct mcf_platform_uart {
 #define	MCFUART_URF_RXS		0xc0		/* Receiver status */
 #endif
 
+#if defined(CONFIG_M5272)
+#define MCFUART_TXFIFOSIZE	25
+#else
+#define MCFUART_TXFIFOSIZE	1
+#endif
 /****************************************************************************/
 #endif	/* mcfuart_h */
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
index 85c41b7..36265cc 100644
--- a/arch/m68k/include/asm/param.h
+++ b/arch/m68k/include/asm/param.h
@@ -1,26 +1,12 @@
 #ifndef _M68K_PARAM_H
 #define _M68K_PARAM_H
 
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
 #ifdef __uClinux__
 #define EXEC_PAGESIZE	4096
 #else
 #define EXEC_PAGESIZE	8192
 #endif
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index aca0e28..87174c9 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -115,7 +115,7 @@ extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
  * they are updated on demand.
  */
 static inline void update_mmu_cache(struct vm_area_struct *vma,
-				    unsigned long address, pte_t pte)
+				    unsigned long address, pte_t *ptep)
 {
 }
 
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index cbd3d47..7a6a759 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -44,11 +44,15 @@ static inline void wrusp(unsigned long usp)
  * User space process size: 3.75GB. This is hardcoded into a few places,
  * so don't change it unless you know what you are doing.
  */
+#ifdef CONFIG_MMU
 #ifndef CONFIG_SUN3
 #define TASK_SIZE	(0xF0000000UL)
 #else
 #define TASK_SIZE	(0x0E000000UL)
 #endif
+#else
+#define TASK_SIZE	(0xFFFFFFFFUL)
+#endif
 
 #ifdef __KERNEL__
 #define STACK_TOP	TASK_SIZE
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index ee4011c..6e6e3ac 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -71,6 +71,8 @@ struct switch_stack {
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15
 
+#define PTRACE_GET_THREAD_AREA    25
+
 #define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
 
 #ifdef __KERNEL__
@@ -85,18 +87,10 @@ struct switch_stack {
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
 
-/*
- * These are defined as per linux/ptrace.h.
- */
-struct task_struct;
-
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #ifdef CONFIG_MMU
 #define arch_has_block_step()	(1)
-extern void user_enable_block_step(struct task_struct *);
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
index e27ad90..175da06 100644
--- a/arch/m68k/include/asm/scatterlist.h
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -1,23 +1,9 @@
 #ifndef _M68K_SCATTERLIST_H
 #define _M68K_SCATTERLIST_H
 
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;
-
-	dma_addr_t dma_address;	/* A place to hang host-specific addresses at. */
-};
+#include <asm-generic/scatterlist.h>
 
 /* This is bogus and should go away. */
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 #endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
index 523db2a..a29dd74 100644
--- a/arch/m68k/include/asm/sigcontext.h
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -15,7 +15,11 @@ struct sigcontext {
 	unsigned long  sc_pc;
 	unsigned short sc_formatvec;
 #ifndef __uClinux__
+# ifdef __mcoldfire__
+	unsigned long  sc_fpregs[2][2];	/* room for two fp registers */
+# else
 	unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
+# endif
 	unsigned long  sc_fpcntl[3];
 	unsigned char  sc_fpstate[216];
 #endif
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
index ca7dde8..851d3d7 100644
--- a/arch/m68k/include/asm/siginfo.h
+++ b/arch/m68k/include/asm/siginfo.h
@@ -1,97 +1,6 @@
 #ifndef _M68K_SIGINFO_H
 #define _M68K_SIGINFO_H
 
-#ifndef __uClinux__
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-#endif
-
 #include <asm-generic/siginfo.h>
 
-#ifndef __uClinux__
-
-typedef struct siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-
-	union {
-		int _pad[SI_PAD_SIZE];
-
-		/* kill() */
-		struct {
-			__kernel_pid_t _pid;	/* sender's pid */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
-			sigval_t _sigval;	/* same as below */
-			int _sys_private;       /* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			__kernel_pid_t _pid;	/* sender's pid */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			sigval_t _sigval;
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			__kernel_pid_t _pid;	/* which child */
-			__kernel_uid_t _uid;	/* backwards compatibility */
-			int _status;		/* exit code */
-			clock_t _utime;
-			clock_t _stime;
-			__kernel_uid32_t _uid32; /* sender's uid */
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			void *_addr; /* faulting insn/memory ref. */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} siginfo_t;
-
-#define UID16_SIGINFO_COMPAT_NEEDED
-
-/*
- * How these fields are to be accessed.
- */
-#undef si_uid
-#ifdef __KERNEL__
-#define si_uid		_sifields._kill._uid32
-#define si_uid16	_sifields._kill._uid
-#else
-#define si_uid		_sifields._kill._uid
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/string.h>
-
-static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
-{
-	if (from->si_code < 0)
-		memcpy(to, from, sizeof(*to));
-	else
-		/* _sigchld is currently the largest know union member */
-		memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
-}
-
-#endif /* __KERNEL__ */
-#endif /* !__uClinux__ */
-
 #endif
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
index 5b754aa..b7b37a4 100644
--- a/arch/m68k/include/asm/swab.h
+++ b/arch/m68k/include/asm/swab.h
@@ -14,7 +14,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
 }
 
 #define __arch_swab32 __arch_swab32
-#elif !defined(__uClinux__)
+#elif !defined(__mcoldfire__)
 
 static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
 {
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index 167e518..3bf31dc 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -16,6 +16,7 @@ struct thread_info {
 	struct exec_domain	*exec_domain;	/* execution domain */
 	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
 	__u32 cpu; /* should always be 0 on m68k */
+	unsigned long		tp_value;	/* thread pointer */
 	struct restart_block    restart_block;
 };
 #endif /* __ASSEMBLY__ */
@@ -64,7 +65,7 @@ struct thread_info {
 #define TIF_NEED_RESCHED	7	/* rescheduling necessary */
 #define TIF_DELAYED_TRACE	14	/* single step a syscall */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-#define TIF_MEMDIE		16
+#define TIF_MEMDIE		16	/* is terminating due to OOM killer */
 #define TIF_FREEZE		17	/* thread is freezing for suspend */
 
 #endif	/* _ASM_M68K_THREAD_INFO_H */
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index a6512bf..51f354b 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -37,6 +37,7 @@ struct thread_info {
 	unsigned long	   flags;		/* low level flags */
 	int		   cpu;			/* cpu we're on */
 	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
+	unsigned long	   tp_value;		/* thread pointer */
 	struct restart_block restart_block;
 };
 
@@ -84,7 +85,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
index e4e2266..00dcc51 100644
--- a/arch/m68k/include/asm/ucontext.h
+++ b/arch/m68k/include/asm/ucontext.h
@@ -7,7 +7,11 @@ typedef greg_t gregset_t[NGREG];
 
 typedef struct fpregset {
 	int f_fpcntl[3];
+#ifdef __mcoldfire__
+	int f_fpregs[8][2];
+#else
 	int f_fpregs[8*3];
+#endif
 } fpregset_t;
 
 struct mcontext {
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 48b87f5..60b15d0 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -336,10 +336,14 @@
 #define __NR_pwritev		330
 #define __NR_rt_tgsigqueueinfo	331
 #define __NR_perf_event_open	332
+#define __NR_get_thread_area	333
+#define __NR_set_thread_area	334
+#define __NR_atomic_cmpxchg_32	335
+#define __NR_atomic_barrier	336
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		333
+#define NR_syscalls		337
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
@@ -347,6 +351,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -359,6 +364,8 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
index 3f834b3..f35229b 100644
--- a/arch/m68k/include/asm/virtconvert.h
+++ b/arch/m68k/include/asm/virtconvert.h
@@ -31,12 +31,7 @@ static inline void *phys_to_virt(unsigned long address)
 #define page_to_phys(page) \
 	__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
 #else
-#define page_to_phys(_page) ({						\
-	struct page *__page = _page;					\
-	struct pglist_data *pgdat;					\
-	pgdat = pg_data_table[page_to_nid(__page)];			\
-	page_to_pfn(__page) << PAGE_SHIFT;				\
-})
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 #endif
 #else
 #define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 2bb4245..4bbb3c2 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -10,6 +10,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include <asm/pgalloc.h>
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 77fc7c1..2391bdf 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -510,7 +510,7 @@ sys_call_table:
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -518,7 +518,7 @@ sys_call_table:
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
@@ -761,4 +761,8 @@ sys_call_table:
 	.long sys_pwritev		/* 330 */
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
+	.long sys_get_thread_area
+	.long sys_set_thread_area
+	.long sys_atomic_cmpxchg_32	/* 335 */
+	.long sys_atomic_barrier
 
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 0529659..1a6be27 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -15,13 +15,13 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/reboot.h>
 #include <linux/init_task.h>
@@ -251,6 +251,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	p->thread.usp = usp;
 	p->thread.ksp = (unsigned long)childstack;
+
+	if (clone_flags & CLONE_SETTLS)
+		task_thread_info(p)->tp_value = regs->d5;
+
 	/*
 	 * Must save the current SFC/DFC value, NOT the value when
 	 * the parent was last descheduled - RGH  10-08-96
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 1fc217e..616e597 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -245,6 +245,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = -EFAULT;
 		break;
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->tp_value,
+			       (unsigned long __user *)data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index de2d05d..4b38753 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -897,10 +897,17 @@ static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up to return from userspace.  */
 	err |= __put_user(frame->retcode, &frame->pretcode);
+#ifdef __mcoldfire__
+	/* movel #__NR_rt_sigreturn,d0; trap #0 */
+	err |= __put_user(0x203c0000, (long __user *)(frame->retcode + 0));
+	err |= __put_user(0x00004e40 + (__NR_rt_sigreturn << 16),
+			  (long __user *)(frame->retcode + 4));
+#else
 	/* moveq #,d0; notb d0; trap #0 */
 	err |= __put_user(0x70004600 + ((__NR_rt_sigreturn ^ 0xff) << 16),
 			  (long __user *)(frame->retcode + 0));
 	err |= __put_user(0x4e40, (short __user *)(frame->retcode + 4));
+#endif
 
 	if (err)
 		goto give_sigsegv;
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 218f441..7789669 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -28,6 +28,11 @@
 #include <asm/traps.h>
 #include <asm/page.h>
 #include <asm/unistd.h>
+#include <linux/elf.h>
+#include <asm/tlb.h>
+
+asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
+			     unsigned long error_code);
 
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
@@ -41,137 +46,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user *__user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -ENOSYS;
-		}
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, ptr, second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp, ptr, sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first, ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* Convert virtual (user) address VADDR to physical address PADDR */
 #define virt_to_phys_040(vaddr)						\
 ({									\
@@ -595,3 +469,79 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 			: "d" (__a), "d" (__b), "d" (__c));
 	return __res;
 }
+
+asmlinkage unsigned long sys_get_thread_area(void)
+{
+	return current_thread_info()->tp_value;
+}
+
+asmlinkage int sys_set_thread_area(unsigned long tp)
+{
+	current_thread_info()->tp_value = tp;
+	return 0;
+}
+
+/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
+   D1 (newval).  */
+asmlinkage int
+sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
+		      unsigned long __user * mem)
+{
+	/* This was borrowed from ARM's implementation.  */
+	for (;;) {
+		struct mm_struct *mm = current->mm;
+		pgd_t *pgd;
+		pmd_t *pmd;
+		pte_t *pte;
+		spinlock_t *ptl;
+		unsigned long mem_value;
+
+		down_read(&mm->mmap_sem);
+		pgd = pgd_offset(mm, (unsigned long)mem);
+		if (!pgd_present(*pgd))
+			goto bad_access;
+		pmd = pmd_offset(pgd, (unsigned long)mem);
+		if (!pmd_present(*pmd))
+			goto bad_access;
+		pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl);
+		if (!pte_present(*pte) || !pte_dirty(*pte)
+		    || !pte_write(*pte)) {
+			pte_unmap_unlock(pte, ptl);
+			goto bad_access;
+		}
+
+		mem_value = *mem;
+		if (mem_value == oldval)
+			*mem = newval;
+
+		pte_unmap_unlock(pte, ptl);
+		up_read(&mm->mmap_sem);
+		return mem_value;
+
+	      bad_access:
+		up_read(&mm->mmap_sem);
+		/* This is not necessarily a bad access, we can get here if
+		   a memory we're trying to write to should be copied-on-write.
+		   Make the kernel do the necessary page stuff, then re-iterate.
+		   Simulate a write access fault to do that.  */
+		{
+			/* The first argument of the function corresponds to
+			   D1, which is the first field of struct pt_regs.  */
+			struct pt_regs *fp = (struct pt_regs *)&newval;
+
+			/* '3' is an RMW flag.  */
+			if (do_page_fault(fp, (unsigned long)mem, 3))
+				/* If the do_page_fault() failed, we don't
+				   have anything meaningful to return.
+				   There should be a SIGSEGV pending for
+				   the process.  */
+				return 0xdeadbeef;
+		}
+	}
+}
+
+asmlinkage int sys_atomic_barrier(void)
+{
+	/* no code needed for uniprocs */
+	return 0;
+}
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 17dc2a3..4926b38 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -73,21 +73,24 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
 	return IRQ_HANDLED;
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time time;
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
 
 	if (mach_hwclk) {
 		mach_hwclk(0, &time);
 
 		if ((time.tm_year += 1900) < 1970)
 			time.tm_year += 100;
-		xtime.tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
+		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
 				      time.tm_hour, time.tm_min, time.tm_sec);
-		xtime.tv_nsec = 0;
 	}
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
+}
 
+void __init time_init(void)
+{
 	mach_sched_init(timer_interrupt);
 }
 
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index aacd6d1..ada4f4c 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -455,7 +455,7 @@ static inline void access_error040(struct frame *fp)
 
 		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
 #ifdef DEBUG
-		        printk("do_page_fault() !=0 \n");
+			printk("do_page_fault() !=0\n");
 #endif
 			if (user_mode(&fp->ptregs)){
 				/* delay writebacks after signal delivery */
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index daebd80..b8d4c83 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -3,4 +3,4 @@
 #
 
 obj-y		:= config.o macints.o iop.o via.o oss.o psc.o \
-			baboon.o macboing.o debug.o misc.o
+			baboon.o macboing.o misc.o
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index be01798..1c16b1b 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -23,6 +23,8 @@
 #include <linux/init.h>
 #include <linux/vt_kern.h>
 #include <linux/platform_device.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
 
 #define BOOTINFO_COMPAT_1_0
 #include <asm/setup.h>
@@ -44,12 +46,7 @@
 #include <asm/mac_oss.h>
 #include <asm/mac_psc.h>
 
-/* platform device info */
-
-#define SWIM_IO_SIZE 0x2000	/* SWIM IO resource size */
-
 /* Mac bootinfo struct */
-
 struct mac_booter_data mac_bi_data;
 
 /* The phys. video addr. - might be bogus on some machines */
@@ -70,8 +67,6 @@ extern void baboon_init(void);
 
 extern void mac_mksound(unsigned int, unsigned int);
 
-extern void nubus_sweep_video(void);
-
 static void mac_get_model(char *str);
 static void mac_identify(void);
 static void mac_report_hardware(void);
@@ -153,7 +148,7 @@ static void mac_cache_card_flush(int writeback)
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
-		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
+		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!!\n");
 
 	mach_sched_init = mac_sched_init;
 	mach_init_IRQ = mac_init_IRQ;
@@ -168,12 +163,6 @@ void __init config_mac(void)
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep = mac_mksound;
 #endif
-#ifdef CONFIG_HEARTBEAT
-#if 0
-	mach_heartbeat = mac_heartbeat;
-	mach_heartbeat_irq = IRQ_MAC_TIMER;
-#endif
-#endif
 
 	/*
 	 * Determine hardware present
@@ -191,27 +180,19 @@ void __init config_mac(void)
 	if (macintosh_config->ident == MAC_MODEL_IICI
 	    || macintosh_config->ident == MAC_MODEL_IIFX)
 		mach_l2_flush = mac_cache_card_flush;
-
-	/*
-	 * Check for machine specific fixups.
-	 */
-
-#ifdef OLD_NUBUS_CODE
-	nubus_sweep_video();
-#endif
 }
 
 
 /*
- *	Macintosh Table: hardcoded model configuration data.
+ * Macintosh Table: hardcoded model configuration data.
  *
- *	Much of this was defined by Alan, based on who knows what docs.
- *	I've added a lot more, and some of that was pure guesswork based
- *	on hardware pages present on the Mac web site. Possibly wildly
- *	inaccurate, so look here if a new Mac model won't run. Example: if
- *	a Mac crashes immediately after the VIA1 registers have been dumped
- *	to the screen, it probably died attempting to read DirB on a RBV.
- *	Meaning it should have MAC_VIA_IIci here :-)
+ * Much of this was defined by Alan, based on who knows what docs.
+ * I've added a lot more, and some of that was pure guesswork based
+ * on hardware pages present on the Mac web site. Possibly wildly
+ * inaccurate, so look here if a new Mac model won't run. Example: if
+ * a Mac crashes immediately after the VIA1 registers have been dumped
+ * to the screen, it probably died attempting to read DirB on a RBV.
+ * Meaning it should have MAC_VIA_IIci here :-)
  */
 
 struct mac_model *macintosh_config;
@@ -219,7 +200,7 @@ EXPORT_SYMBOL(macintosh_config);
 
 static struct mac_model mac_data_table[] = {
 	/*
-	 *	We'll pretend to be a Macintosh II, that's pretty safe.
+	 * We'll pretend to be a Macintosh II, that's pretty safe.
 	 */
 
 	{
@@ -230,12 +211,11 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_IWM
+		.floppy_type	= MAC_FLOPPY_IWM,
 	},
 
 	/*
-	 *	Original MacII hardware
-	 *
+	 * Original Mac II hardware
 	 */
 
 	{
@@ -246,7 +226,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_IWM
+		.floppy_type	= MAC_FLOPPY_IWM,
 	}, {
 		.ident		= MAC_MODEL_IIX,
 		.name		= "IIx",
@@ -255,7 +235,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_IICX,
 		.name		= "IIcx",
@@ -264,7 +244,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_SE30,
 		.name		= "SE/30",
@@ -273,13 +253,13 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Weirdified MacII hardware - all subtly different. Gee thanks
-	 *	Apple. All these boxes seem to have VIA2 in a different place to
-	 *	the MacII (+1A000 rather than +4000)
+	 * Weirdified Mac II hardware - all subtly different. Gee thanks
+	 * Apple. All these boxes seem to have VIA2 in a different place to
+	 * the Mac II (+1A000 rather than +4000)
 	 * CSA: see http://developer.apple.com/technotes/hw/hw_09.html
 	 */
 
@@ -291,7 +271,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_IIFX,
 		.name		= "IIfx",
@@ -300,7 +280,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_IOP,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_IOP
+		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
 	}, {
 		.ident		= MAC_MODEL_IISI,
 		.name		= "IIsi",
@@ -309,7 +289,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_IIVI,
 		.name		= "IIvi",
@@ -318,7 +298,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_IIVX,
 		.name		= "IIvx",
@@ -327,11 +307,11 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Classic models (guessing: similar to SE/30 ?? Nope, similar to LC ...)
+	 * Classic models (guessing: similar to SE/30? Nope, similar to LC...)
 	 */
 
 	{
@@ -342,7 +322,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_CCL,
 		.name		= "Color Classic",
@@ -351,11 +331,11 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
+	 * Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
 	 */
 
 	{
@@ -366,7 +346,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_LCII,
 		.name		= "LC II",
@@ -375,7 +355,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_LCIII,
 		.name		= "LC III",
@@ -384,17 +364,17 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Quadra. Video is at 0xF9000000, via is like a MacII. We label it differently
-	 *	as some of the stuff connected to VIA2 seems different. Better SCSI chip and
-	 *	onboard ethernet using a NatSemi SONIC except the 660AV and 840AV which use an
-	 *	AMD 79C940 (MACE).
-	 *	The 700, 900 and 950 have some I/O chips in the wrong place to
-	 *	confuse us. The 840AV has a SCSI location of its own (same as
-	 *	the 660AV).
+	 * Quadra. Video is at 0xF9000000, via is like a MacII. We label it
+	 * differently as some of the stuff connected to VIA2 seems different.
+	 * Better SCSI chip and onboard ethernet using a NatSemi SONIC except
+	 * the 660AV and 840AV which use an AMD 79C940 (MACE).
+	 * The 700, 900 and 950 have some I/O chips in the wrong place to
+	 * confuse us. The 840AV has a SCSI location of its own (same as
+	 * the 660AV).
 	 */
 
 	{
@@ -405,7 +385,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q605_ACC,
 		.name		= "Quadra 605",
@@ -414,7 +394,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q610,
 		.name		= "Quadra 610",
@@ -424,7 +404,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q630,
 		.name		= "Quadra 630",
@@ -435,7 +415,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q650,
 		.name		= "Quadra 650",
@@ -445,9 +425,9 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	},
-	/*	The Q700 does have a NS Sonic */
+	/* The Q700 does have a NS Sonic */
 	{
 		.ident		= MAC_MODEL_Q700,
 		.name		= "Quadra 700",
@@ -457,7 +437,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q800,
 		.name		= "Quadra 800",
@@ -467,7 +447,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_Q840,
 		.name		= "Quadra 840AV",
@@ -477,7 +457,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_PSC,
 		.ether_type	= MAC_ETHER_MACE,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_AV
+		.floppy_type	= MAC_FLOPPY_AV,
 	}, {
 		.ident		= MAC_MODEL_Q900,
 		.name		= "Quadra 900",
@@ -487,7 +467,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_IOP,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_IOP
+		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
 	}, {
 		.ident		= MAC_MODEL_Q950,
 		.name		= "Quadra 950",
@@ -497,60 +477,60 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_IOP,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_IOP
+		.floppy_type	= MAC_FLOPPY_SWIM_IOP,
 	},
 
 	/*
-	 *	Performa - more LC type machines
+	 * Performa - more LC type machines
 	 */
 
 	{
 		.ident		= MAC_MODEL_P460,
-		.name		=  "Performa 460",
+		.name		= "Performa 460",
 		.adb_type	= MAC_ADB_IISI,
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_P475,
-		.name		=  "Performa 475",
+		.name		= "Performa 475",
 		.adb_type	= MAC_ADB_CUDA,
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_P475F,
-		.name		=  "Performa 475",
+		.name		= "Performa 475",
 		.adb_type	= MAC_ADB_CUDA,
 		.via_type	= MAC_VIA_QUADRA,
 		.scsi_type	= MAC_SCSI_QUADRA,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_P520,
-		.name		=  "Performa 520",
+		.name		= "Performa 520",
 		.adb_type	= MAC_ADB_CUDA,
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_P550,
-		.name		=  "Performa 550",
+		.name		= "Performa 550",
 		.adb_type	= MAC_ADB_CUDA,
 		.via_type	= MAC_VIA_IIci,
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
-	/* These have the comm slot, and therefore the possibility of SONIC ethernet */
+	/* These have the comm slot, and therefore possibly SONIC ethernet */
 	{
 		.ident		= MAC_MODEL_P575,
 		.name		= "Performa 575",
@@ -560,7 +540,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_II,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_P588,
 		.name		= "Performa 588",
@@ -571,7 +551,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_II,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_TV,
 		.name		= "TV",
@@ -580,7 +560,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_P600,
 		.name		= "Performa 600",
@@ -589,14 +569,14 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_II,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Centris - just guessing again; maybe like Quadra
+	 * Centris - just guessing again; maybe like Quadra.
+	 * The C610 may or may not have SONIC. We probe to make sure.
 	 */
 
-	/* The C610 may or may not have SONIC.  We probe to make sure */
 	{
 		.ident		= MAC_MODEL_C610,
 		.name		= "Centris 610",
@@ -606,7 +586,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_C650,
 		.name		= "Centris 650",
@@ -616,7 +596,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR1
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR1,
 	}, {
 		.ident		= MAC_MODEL_C660,
 		.name		= "Centris 660AV",
@@ -626,7 +606,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_PSC,
 		.ether_type	= MAC_ETHER_MACE,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_AV
+		.floppy_type	= MAC_FLOPPY_AV,
 	},
 
 	/*
@@ -643,7 +623,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB145,
 		.name		= "PowerBook 145",
@@ -652,7 +632,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB150,
 		.name		= "PowerBook 150",
@@ -662,7 +642,7 @@ static struct mac_model mac_data_table[] = {
 		.ide_type	= MAC_IDE_PB,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB160,
 		.name		= "PowerBook 160",
@@ -671,7 +651,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB165,
 		.name		= "PowerBook 165",
@@ -680,7 +660,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB165C,
 		.name		= "PowerBook 165c",
@@ -689,7 +669,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB170,
 		.name		= "PowerBook 170",
@@ -698,7 +678,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB180,
 		.name		= "PowerBook 180",
@@ -707,7 +687,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB180C,
 		.name		= "PowerBook 180c",
@@ -716,7 +696,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB190,
 		.name		= "PowerBook 190",
@@ -726,7 +706,7 @@ static struct mac_model mac_data_table[] = {
 		.ide_type	= MAC_IDE_BABOON,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB520,
 		.name		= "PowerBook 520",
@@ -736,7 +716,7 @@ static struct mac_model mac_data_table[] = {
 		.scc_type	= MAC_SCC_QUADRA,
 		.ether_type	= MAC_ETHER_SONIC,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
@@ -757,7 +737,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB230,
 		.name		= "PowerBook Duo 230",
@@ -766,7 +746,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB250,
 		.name		= "PowerBook Duo 250",
@@ -775,7 +755,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB270C,
 		.name		= "PowerBook Duo 270c",
@@ -784,7 +764,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB280,
 		.name		= "PowerBook Duo 280",
@@ -793,7 +773,7 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	}, {
 		.ident		= MAC_MODEL_PB280C,
 		.name		= "PowerBook Duo 280c",
@@ -802,17 +782,44 @@ static struct mac_model mac_data_table[] = {
 		.scsi_type	= MAC_SCSI_OLD,
 		.scc_type	= MAC_SCC_QUADRA,
 		.nubus_type	= MAC_NUBUS,
-		.floppy_type    = MAC_FLOPPY_SWIM_ADDR2
+		.floppy_type	= MAC_FLOPPY_SWIM_ADDR2,
 	},
 
 	/*
-	 *	Other stuff ??
+	 * Other stuff?
 	 */
+
 	{
 		.ident		= -1
 	}
 };
 
+static struct resource scc_a_rsrcs[] = {
+	{ .flags = IORESOURCE_MEM },
+	{ .flags = IORESOURCE_IRQ },
+};
+
+static struct resource scc_b_rsrcs[] = {
+	{ .flags = IORESOURCE_MEM },
+	{ .flags = IORESOURCE_IRQ },
+};
+
+struct platform_device scc_a_pdev = {
+	.name           = "scc",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(scc_a_rsrcs),
+	.resource       = scc_a_rsrcs,
+};
+EXPORT_SYMBOL(scc_a_pdev);
+
+struct platform_device scc_b_pdev = {
+	.name           = "scc",
+	.id             = 1,
+	.num_resources  = ARRAY_SIZE(scc_b_rsrcs),
+	.resource       = scc_b_rsrcs,
+};
+EXPORT_SYMBOL(scc_b_pdev);
+
 static void __init mac_identify(void)
 {
 	struct mac_model *m;
@@ -823,7 +830,8 @@ static void __init mac_identify(void)
 		/* no bootinfo model id -> NetBSD booter was used! */
 		/* XXX FIXME: breaks for model > 31 */
 		model = (mac_bi_data.cpuid >> 2) & 63;
-		printk(KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
+		printk(KERN_WARNING "No bootinfo model ID, using cpuid instead "
+		       "(obsolete bootloader?)\n");
 	}
 
 	macintosh_config = mac_data_table;
@@ -834,28 +842,48 @@ static void __init mac_identify(void)
 		}
 	}
 
-	/* We need to pre-init the IOPs, if any. Otherwise */
-	/* the serial console won't work if the user had   */
-	/* the serial ports set to "Faster" mode in MacOS. */
+	/* Set up serial port resources for the console initcall. */
+
+	scc_a_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase + 2;
+	scc_a_rsrcs[0].end   = scc_a_rsrcs[0].start;
+	scc_b_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase;
+	scc_b_rsrcs[0].end   = scc_b_rsrcs[0].start;
 
+	switch (macintosh_config->scc_type) {
+	case MAC_SCC_PSC:
+		scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC_A;
+		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
+		break;
+	default:
+		scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
+		scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
+		break;
+	}
+
+	/*
+	 * We need to pre-init the IOPs, if any. Otherwise
+	 * the serial console won't work if the user had
+	 * the serial ports set to "Faster" mode in MacOS.
+	 */
 	iop_preinit();
 
-	printk(KERN_INFO "Detected Macintosh model: %d \n", model);
+	printk(KERN_INFO "Detected Macintosh model: %d\n", model);
 
 	/*
 	 * Report booter data:
 	 */
 	printk(KERN_DEBUG " Penguin bootinfo data:\n");
-	printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
+	printk(KERN_DEBUG " Video: addr 0x%lx "
+		"row 0x%lx depth %lx dimensions %ld x %ld\n",
 		mac_bi_data.videoaddr, mac_bi_data.videorow,
 		mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
 		mac_bi_data.dimensions >> 16);
-	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n",
 		mac_bi_data.videological, mac_orig_videoaddr,
 		mac_bi_data.sccbase);
-	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n",
 		mac_bi_data.boottime, mac_bi_data.gmtbias);
-	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n",
 		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
 
 	iop_init();
@@ -863,6 +891,10 @@ static void __init mac_identify(void)
 	oss_init();
 	psc_init();
 	baboon_init();
+
+#ifdef CONFIG_ADB_CUDA
+	find_via_cuda();
+#endif
 }
 
 static void __init mac_report_hardware(void)
@@ -876,23 +908,50 @@ static void mac_get_model(char *str)
 	strcat(str, macintosh_config->name);
 }
 
-static struct resource swim_resources[1];
+static struct resource swim_rsrc = { .flags = IORESOURCE_MEM };
 
-static struct platform_device swim_device = {
+static struct platform_device swim_pdev = {
 	.name		= "swim",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(swim_resources),
-	.resource	= swim_resources,
+	.num_resources	= 1,
+	.resource	= &swim_rsrc,
 };
 
-static struct platform_device *mac_platform_devices[] __initdata = {
-	&swim_device
+static struct platform_device esp_0_pdev = {
+	.name		= "mac_esp",
+	.id		= 0,
+};
+
+static struct platform_device esp_1_pdev = {
+	.name		= "mac_esp",
+	.id		= 1,
+};
+
+static struct platform_device sonic_pdev = {
+	.name		= "macsonic",
+	.id		= -1,
+};
+
+static struct platform_device mace_pdev = {
+	.name		= "macmace",
+	.id		= -1,
 };
 
 int __init mac_platform_init(void)
 {
 	u8 *swim_base;
 
+	/*
+	 * Serial devices
+	 */
+
+	platform_device_register(&scc_a_pdev);
+	platform_device_register(&scc_b_pdev);
+
+	/*
+	 * Floppy device
+	 */
+
 	switch (macintosh_config->floppy_type) {
 	case MAC_FLOPPY_SWIM_ADDR1:
 		swim_base = (u8 *)(VIA1_BASE + 0x1E000);
@@ -901,16 +960,47 @@ int __init mac_platform_init(void)
 		swim_base = (u8 *)(VIA1_BASE + 0x16000);
 		break;
 	default:
-		return 0;
+		swim_base = NULL;
+		break;
 	}
 
-	swim_resources[0].name = "swim-regs";
-	swim_resources[0].start = (resource_size_t)swim_base;
-	swim_resources[0].end = (resource_size_t)(swim_base + SWIM_IO_SIZE);
-	swim_resources[0].flags = IORESOURCE_MEM;
+	if (swim_base) {
+		swim_rsrc.start = (resource_size_t) swim_base,
+		swim_rsrc.end   = (resource_size_t) swim_base + 0x2000,
+		platform_device_register(&swim_pdev);
+	}
+
+	/*
+	 * SCSI device(s)
+	 */
+
+	switch (macintosh_config->scsi_type) {
+	case MAC_SCSI_QUADRA:
+	case MAC_SCSI_QUADRA3:
+		platform_device_register(&esp_0_pdev);
+		break;
+	case MAC_SCSI_QUADRA2:
+		platform_device_register(&esp_0_pdev);
+		if ((macintosh_config->ident == MAC_MODEL_Q900) ||
+		    (macintosh_config->ident == MAC_MODEL_Q950))
+			platform_device_register(&esp_1_pdev);
+		break;
+	}
+
+	/*
+	 * Ethernet device
+	 */
+
+	switch (macintosh_config->ether_type) {
+	case MAC_ETHER_SONIC:
+		platform_device_register(&sonic_pdev);
+		break;
+	case MAC_ETHER_MACE:
+		platform_device_register(&mace_pdev);
+		break;
+	}
 
-	return platform_add_devices(mac_platform_devices,
-				    ARRAY_SIZE(mac_platform_devices));
+	return 0;
 }
 
 arch_initcall(mac_platform_init);
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
deleted file mode 100644
index bce074c..0000000
--- a/arch/m68k/mac/debug.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * linux/arch/m68k/mac/debug.c
- *
- * Shamelessly stolen (SCC code and general framework) from:
- *
- * linux/arch/m68k/atari/debug.c
- *
- * Atari debugging and serial console stuff
- *
- * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#define BOOTINFO_COMPAT_1_0
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macints.h>
-
-extern unsigned long mac_videobase;
-extern unsigned long mac_rowbytes;
-
-extern void mac_serial_print(const char *);
-
-#define DEBUG_HEADS
-#undef DEBUG_SCREEN
-#define DEBUG_SERIAL
-
-/*
- * These two auxiliary debug functions should go away ASAP. Only usage:
- * before the console output is up (after head.S come some other crucial
- * setup routines :-) it permits writing 'data' to the screen as bit patterns
- * (good luck reading those). Helped to figure that the bootinfo contained
- * garbage data on the amount and size of memory chunks ...
- *
- * The 'pos' argument now simply means 'linefeed after print' ...
- */
-
-#ifdef DEBUG_SCREEN
-static int peng, line;
-#endif
-
-#if 0
-
-void mac_debugging_short(int pos, short num)
-{
-#ifdef DEBUG_SCREEN
-	unsigned char *pengoffset;
-	unsigned char *pptr;
-	int i;
-#endif
-
-#ifdef DEBUG_SERIAL
-	printk("debug: %d !\n", num);
-#endif
-
-#ifdef DEBUG_SCREEN
-	if (!MACH_IS_MAC) {
-		/* printk("debug: %d !\n", num); */
-		return;
-	}
-
-	/* calculate current offset */
-	pengoffset = (unsigned char *)mac_videobase +
-		(150+line*2) * mac_rowbytes + 80 * peng;
-
-	pptr = pengoffset;
-
-	for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */
-		/*        value        mask for bit i, reverse order */
-		*pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00);
-	}
-
-	peng++;
-
-	if (pos) {
-		line++;
-		peng = 0;
-	}
-#endif
-}
-
-void mac_debugging_long(int pos, long addr)
-{
-#ifdef DEBUG_SCREEN
-	unsigned char *pengoffset;
-	unsigned char *pptr;
-	int i;
-#endif
-
-#ifdef DEBUG_SERIAL
-	printk("debug: #%ld !\n", addr);
-#endif
-
-#ifdef DEBUG_SCREEN
-	if (!MACH_IS_MAC) {
-		/* printk("debug: #%ld !\n", addr); */
-		return;
-	}
-
-	pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
-		    +80*peng;
-
-	pptr = pengoffset;
-
-	for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */
-		*pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00);
-	}
-
-	peng++;
-
-	if (pos) {
-		line++;
-		peng = 0;
-	}
-#endif
-}
-
-#endif  /*  0  */
-
-#ifdef DEBUG_SERIAL
-/*
- * TODO: serial debug code
- */
-
-struct mac_SCC {
-	u_char cha_b_ctrl;
-	u_char char_dummy1;
-	u_char cha_a_ctrl;
-	u_char char_dummy2;
-	u_char cha_b_data;
-	u_char char_dummy3;
-	u_char cha_a_data;
-};
-
-# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
-
-static int scc_port = -1;
-
-static struct console mac_console_driver = {
-	.name	= "debug",
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-/*
- * Crude hack to get console output to the screen before the framebuffer
- * is initialized (happens a lot later in 2.1!).
- * We just use the console routines declared in head.S, this will interfere
- * with regular framebuffer console output and should be used exclusively
- * to debug kernel problems manifesting before framebuffer init (aka WSOD)
- *
- * To keep this hack from interfering with the regular console driver, either
- * deregister this driver before/on framebuffer console init, or silence this
- * function after the fbcon driver is running (will lose console messages!?).
- * To debug real early bugs, need to write a 'mac_register_console_hack()'
- * that is called from start_kernel() before setup_arch() and just registers
- * this driver if Mac.
- */
-
-static void mac_debug_console_write(struct console *co, const char *str,
-				    unsigned int count)
-{
-	mac_serial_print(str);
-}
-
-
-
-/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
-
-#define uSEC 1
-
-static inline void mac_sccb_out(char c)
-{
-	int i;
-
-	do {
-		for (i = uSEC; i > 0; --i)
-			barrier();
-	} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
-	for (i = uSEC; i > 0; --i)
-		barrier();
-	scc.cha_b_data = c;
-}
-
-static inline void mac_scca_out(char c)
-{
-	int i;
-
-	do {
-		for (i = uSEC; i > 0; --i)
-			barrier();
-	} while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
-	for (i = uSEC; i > 0; --i)
-		barrier();
-	scc.cha_a_data = c;
-}
-
-static void mac_sccb_console_write(struct console *co, const char *str,
-				   unsigned int count)
-{
-	while (count--) {
-		if (*str == '\n')
-			mac_sccb_out('\r');
-		mac_sccb_out(*str++);
-	}
-}
-
-static void mac_scca_console_write(struct console *co, const char *str,
-				   unsigned int count)
-{
-	while (count--) {
-		if (*str == '\n')
-			mac_scca_out('\r');
-		mac_scca_out(*str++);
-	}
-}
-
-
-/* The following two functions do a quick'n'dirty initialization of the MFP or
- * SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code. */
-#define SCCB_WRITE(reg,val)				\
-	do {						\
-		int i;					\
-		scc.cha_b_ctrl = (reg);			\
-		for (i = uSEC; i > 0; --i)		\
-			barrier();			\
-		scc.cha_b_ctrl = (val);			\
-		for (i = uSEC; i > 0; --i)		\
-			barrier();			\
-	} while(0)
-
-#define SCCA_WRITE(reg,val)				\
-	do {						\
-		int i;					\
-		scc.cha_a_ctrl = (reg);			\
-		for (i = uSEC; i > 0; --i)		\
-			barrier();			\
-		scc.cha_a_ctrl = (val);			\
-		for (i = uSEC; i > 0; --i)		\
-			barrier();			\
-	} while(0)
-
-/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
- * delay of ~ 60us. */
-/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
-#define LONG_DELAY()					\
-	do {						\
-		int i;					\
-		for (i = 60*uSEC; i > 0; --i)		\
-		    barrier();				\
-	} while(0)
-
-static void __init mac_init_scc_port(int cflag, int port)
-{
-	/*
-	 * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
-	 */
-
-	static int clksrc_table[9] =
-		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
-		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
-	static int clkmode_table[9] =
-		/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
-		{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
-	static int div_table[9] =
-		/* reg12 (BRG low) */
-		{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
-
-	int baud = cflag & CBAUD;
-	int clksrc, clkmode, div, reg3, reg5;
-
-	if (cflag & CBAUDEX)
-		baud += B38400;
-	if (baud < B1200 || baud > B38400+2)
-		baud = B9600; /* use default 9600bps for non-implemented rates */
-	baud -= B1200; /* tables starts at 1200bps */
-
-	clksrc  = clksrc_table[baud];
-	clkmode = clkmode_table[baud];
-	div     = div_table[baud];
-
-	reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
-	reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
-
-	if (port == 1) {
-		(void)scc.cha_b_ctrl;	/* reset reg pointer */
-		SCCB_WRITE(9, 0xc0);	/* reset */
-		LONG_DELAY();		/* extra delay after WR9 access */
-		SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
-			   0x04 /* 1 stopbit */ |
-			   clkmode);
-		SCCB_WRITE(3, reg3);
-		SCCB_WRITE(5, reg5);
-		SCCB_WRITE(9, 0);	/* no interrupts */
-		LONG_DELAY();		/* extra delay after WR9 access */
-		SCCB_WRITE(10, 0);	/* NRZ mode */
-		SCCB_WRITE(11, clksrc);	/* main clock source */
-		SCCB_WRITE(12, div);	/* BRG value */
-		SCCB_WRITE(13, 0);	/* BRG high byte */
-		SCCB_WRITE(14, 1);
-		SCCB_WRITE(3, reg3 | 1);
-		SCCB_WRITE(5, reg5 | 8);
-	} else if (port == 0) {
-		(void)scc.cha_a_ctrl;	/* reset reg pointer */
-		SCCA_WRITE(9, 0xc0);	/* reset */
-		LONG_DELAY();		/* extra delay after WR9 access */
-		SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
-			  0x04 /* 1 stopbit */ |
-			  clkmode);
-		SCCA_WRITE(3, reg3);
-		SCCA_WRITE(5, reg5);
-		SCCA_WRITE(9, 0);	/* no interrupts */
-		LONG_DELAY();		/* extra delay after WR9 access */
-		SCCA_WRITE(10, 0);	/* NRZ mode */
-		SCCA_WRITE(11, clksrc);	/* main clock source */
-		SCCA_WRITE(12, div);	/* BRG value */
-		SCCA_WRITE(13, 0);	/* BRG high byte */
-		SCCA_WRITE(14, 1);
-		SCCA_WRITE(3, reg3 | 1);
-		SCCA_WRITE(5, reg5 | 8);
-	}
-}
-#endif /* DEBUG_SERIAL */
-
-static int __init mac_debug_setup(char *arg)
-{
-	if (!MACH_IS_MAC)
-		return 0;
-
-#ifdef DEBUG_SERIAL
-	if (!strcmp(arg, "ser") || !strcmp(arg, "ser1")) {
-		/* Mac modem port */
-		mac_init_scc_port(B9600|CS8, 0);
-		mac_console_driver.write = mac_scca_console_write;
-		scc_port = 0;
-	} else if (!strcmp(arg, "ser2")) {
-		/* Mac printer port */
-		mac_init_scc_port(B9600|CS8, 1);
-		mac_console_driver.write = mac_sccb_console_write;
-		scc_port = 1;
-	}
-#endif
-#ifdef DEBUG_HEADS
-	if (!strcmp(arg, "scn") || !strcmp(arg, "con")) {
-		/* display, using head.S console routines */
-		mac_console_driver.write = mac_debug_console_write;
-	}
-#endif
-	if (mac_console_driver.write)
-		register_console(&mac_console_driver);
-	return 0;
-}
-
-early_param("debug", mac_debug_setup);
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index 2371107..900d899 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -34,9 +34,7 @@
  *
  *	3	- unused (?)
  *
- *	4	- SCC (slot number determined by reading RR3 on the SSC itself)
- *		  - slot 1: SCC channel A
- *		  - slot 2: SCC channel B
+ *	4	- SCC
  *
  *	5	- unused (?)
  *		  [serial errors or special conditions seem to raise level 6
@@ -55,8 +53,6 @@
  *		  - slot 5: Slot $E
  *
  *	4	- SCC IOP
- *		  - slot 1: SCC channel A
- *		  - slot 2: SCC channel B
  *
  *	5	- ISM IOP (ADB?)
  *
@@ -136,13 +132,8 @@
 #include <asm/irq_regs.h>
 #include <asm/mac_oss.h>
 
-#define DEBUG_SPURIOUS
 #define SHUTUP_SONIC
 
-/* SCC interrupt mask */
-
-static int scc_mask;
-
 /*
  * VIA/RBV hooks
  */
@@ -191,13 +182,6 @@ extern void baboon_irq_disable(int);
 extern void baboon_irq_clear(int);
 
 /*
- * SCC interrupt routines
- */
-
-static void scc_irq_enable(unsigned int);
-static void scc_irq_disable(unsigned int);
-
-/*
  * console_loglevel determines NMI handler function
  */
 
@@ -221,8 +205,6 @@ void __init mac_init_IRQ(void)
 #ifdef DEBUG_MACINTS
 	printk("mac_init_IRQ(): Setting things up...\n");
 #endif
-	scc_mask = 0;
-
 	m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
 				  NUM_MAC_SOURCES - IRQ_USER);
 	/* Make sure the SONIC interrupt is cleared or things get ugly */
@@ -283,15 +265,16 @@ void mac_enable_irq(unsigned int irq)
 			via_irq_enable(irq);
 		break;
 	case 3:
-	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
 			psc_irq_enable(irq);
 		else if (oss_present)
 			oss_irq_enable(irq);
-		else if (irq_src == 4)
-			scc_irq_enable(irq);
+		break;
+	case 4:
+		if (psc_present)
+			psc_irq_enable(irq);
 		break;
 	case 8:
 		if (baboon_present)
@@ -316,15 +299,16 @@ void mac_disable_irq(unsigned int irq)
 			via_irq_disable(irq);
 		break;
 	case 3:
-	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
 			psc_irq_disable(irq);
 		else if (oss_present)
 			oss_irq_disable(irq);
-		else if (irq_src == 4)
-			scc_irq_disable(irq);
+		break;
+	case 4:
+		if (psc_present)
+			psc_irq_disable(irq);
 		break;
 	case 8:
 		if (baboon_present)
@@ -347,7 +331,6 @@ void mac_clear_irq(unsigned int irq)
 			via_irq_clear(irq);
 		break;
 	case 3:
-	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
@@ -355,6 +338,10 @@ void mac_clear_irq(unsigned int irq)
 		else if (oss_present)
 			oss_irq_clear(irq);
 		break;
+	case 4:
+		if (psc_present)
+			psc_irq_clear(irq);
+		break;
 	case 8:
 		if (baboon_present)
 			baboon_irq_clear(irq);
@@ -374,13 +361,17 @@ int mac_irq_pending(unsigned int irq)
 		else
 			return via_irq_pending(irq);
 	case 3:
-	case 4:
 	case 5:
 	case 6:
 		if (psc_present)
 			return psc_irq_pending(irq);
 		else if (oss_present)
 			return oss_irq_pending(irq);
+		break;
+	case 4:
+		if (psc_present)
+			psc_irq_pending(irq);
+		break;
 	}
 	return 0;
 }
@@ -448,59 +439,3 @@ irqreturn_t mac_nmi_handler(int irq, void *dev_id)
 	in_nmi--;
 	return IRQ_HANDLED;
 }
-
-/*
- * Simple routines for masking and unmasking
- * SCC interrupts in cases where this can't be
- * done in hardware (only the PSC can do that.)
- */
-
-static void scc_irq_enable(unsigned int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	scc_mask |= (1 << irq_idx);
-}
-
-static void scc_irq_disable(unsigned int irq)
-{
-	int irq_idx = IRQ_IDX(irq);
-
-	scc_mask &= ~(1 << irq_idx);
-}
-
-/*
- * SCC master interrupt handler. We have to do a bit of magic here
- * to figure out what channel gave us the interrupt; putting this
- * here is cleaner than hacking it into drivers/char/macserial.c.
- */
-
-void mac_scc_dispatch(int irq, void *dev_id)
-{
-	volatile unsigned char *scc = (unsigned char *) mac_bi_data.sccbase + 2;
-	unsigned char reg;
-	unsigned long flags;
-
-	/* Read RR3 from the chip. Always do this on channel A */
-	/* This must be an atomic operation so disable irqs.   */
-
-	local_irq_save(flags);
-	*scc = 3;
-	reg = *scc;
-	local_irq_restore(flags);
-
-	/* Now dispatch. Bits 0-2 are for channel B and */
-	/* bits 3-5 are for channel A. We can safely    */
-	/* ignore the remaining bits here.              */
-	/*                                              */
-	/* Note that we're ignoring scc_mask for now.   */
-	/* If we actually mask the ints then we tend to */
-	/* get hammered by very persistent SCC irqs,    */
-	/* and since they're autovector interrupts they */
-	/* pretty much kill the system.                 */
-
-	if (reg & 0x38)
-		m68k_handle_int(IRQ_SCCA);
-	if (reg & 0x07)
-		m68k_handle_int(IRQ_SCCB);
-}
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 5d818568..0f118ca 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -8,7 +8,6 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
 #include <linux/mm.h>
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index f3d23d6..a9c0f5a 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -33,7 +33,6 @@ static irqreturn_t oss_irq(int, void *);
 static irqreturn_t oss_nubus_irq(int, void *);
 
 extern irqreturn_t via1_irq(int, void *);
-extern irqreturn_t mac_scc_dispatch(int, void *);
 
 /*
  * Initialize the OSS
@@ -69,9 +68,6 @@ void __init oss_register_interrupts(void)
 	if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
 			"scsi", (void *) oss))
 		pr_err("Couldn't register %s interrupt\n", "scsi");
-	if (request_irq(OSS_IRQLEV_IOPSCC, mac_scc_dispatch, IRQ_FLG_LOCK,
-			"scc", mac_scc_dispatch))
-		pr_err("Couldn't register %s interrupt\n", "scc");
 	if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
 			"nubus", (void *) oss))
 		pr_err("Couldn't register %s interrupt\n", "nubus");
@@ -172,9 +168,7 @@ void oss_irq_enable(int irq) {
 	printk("oss_irq_enable(%d)\n", irq);
 #endif
 	switch(irq) {
-		case IRQ_SCC:
-		case IRQ_SCCA:
-		case IRQ_SCCB:
+		case IRQ_MAC_SCC:
 			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
 			break;
 		case IRQ_MAC_ADB:
@@ -212,9 +206,7 @@ void oss_irq_disable(int irq) {
 	printk("oss_irq_disable(%d)\n", irq);
 #endif
 	switch(irq) {
-		case IRQ_SCC:
-		case IRQ_SCCA:
-		case IRQ_SCCB:
+		case IRQ_MAC_SCC:
 			oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
 			break;
 		case IRQ_MAC_ADB:
@@ -250,9 +242,7 @@ void oss_irq_disable(int irq) {
 void oss_irq_clear(int irq) {
 	/* FIXME: how to do this on OSS? */
 	switch(irq) {
-		case IRQ_SCC:
-		case IRQ_SCCA:
-		case IRQ_SCCB:
+		case IRQ_MAC_SCC:
 			oss->irq_pending &= ~OSS_IP_IOPSCC;
 			break;
 		case IRQ_MAC_ADB:
@@ -280,9 +270,7 @@ void oss_irq_clear(int irq) {
 int oss_irq_pending(int irq)
 {
 	switch(irq) {
-		case IRQ_SCC:
-		case IRQ_SCCA:
-		case IRQ_SCCB:
+		case IRQ_MAC_SCC:
 			return oss->irq_pending & OSS_IP_IOPSCC;
 			break;
 		case IRQ_MAC_ADB:
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 11bce3c..e71166d 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -84,8 +84,6 @@ void via_irq_enable(int irq);
 void via_irq_disable(int irq);
 void via_irq_clear(int irq);
 
-extern irqreturn_t mac_scc_dispatch(int, void *);
-
 /*
  * Initialize the VIAs
  *
@@ -311,11 +309,6 @@ void __init via_register_interrupts(void)
 	if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
 			"via2", (void *) via2))
 		pr_err("Couldn't register %s interrupt\n", "via2");
-	if (!psc_present) {
-		if (request_irq(IRQ_AUTO_4, mac_scc_dispatch, IRQ_FLG_LOCK,
-				"scc", mac_scc_dispatch))
-			pr_err("Couldn't register %s interrupt\n", "scc");
-	}
 	if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
 			IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
 		pr_err("Couldn't register %s interrupt\n", "nubus");
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index d0e35cf..a96394a 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -154,7 +154,6 @@ good_area:
 	 * the fault.
 	 */
 
- survive:
 	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 #ifdef DEBUG
 	printk("handle_mm_fault returns %d\n",fault);
@@ -180,15 +179,10 @@ good_area:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return 0;
 
 no_context:
 	current->thread.signo = SIGBUS;
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 774549a..8bc8425 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index df620ac..6934584 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -99,8 +99,7 @@ static inline void free_io_area(void *addr)
 #endif
 
 /*
- * Map some physical address range into the kernel address space. The
- * code is copied and adapted from map_chunk().
+ * Map some physical address range into the kernel address space.
  */
 /* Rewritten by Andreas Schwab to remove all races. */
 
@@ -116,7 +115,7 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla
 	/*
 	 * Don't allow mappings that wrap..
 	 */
-	if (!size || size > physaddr + size)
+	if (!size || physaddr > (unsigned long)(-size))
 		return NULL;
 
 #ifdef CONFIG_AMIGA
diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c
index b747352..34c77ce 100644
--- a/arch/m68k/mm/memory.c
+++ b/arch/m68k/mm/memory.c
@@ -9,9 +9,9 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
+#include <linux/gfp.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 4665fc8..02b7a03 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c
index cea5e3e..11ac6f6 100644
--- a/arch/m68k/mvme16x/rtc.c
+++ b/arch/m68k/mvme16x/rtc.c
@@ -9,8 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -37,8 +35,7 @@ static const unsigned char days_in_mo[] =
 
 static atomic_t rtc_ready = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 	unsigned long flags;
@@ -121,22 +118,15 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
 	if( !atomic_dec_and_test(&rtc_ready) )
 	{
 		atomic_inc( &rtc_ready );
-		unlock_kernel();
 		return -EBUSY;
 	}
-	unlock_kernel();
-
 	return 0;
 }
 
@@ -151,9 +141,9 @@ static int rtc_release(struct inode *inode, struct file *file)
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev=
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 31ab3f0..ad10fec 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -126,7 +126,7 @@ static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
-		"Called q40_reset : press the RESET button!! \n"
+		"Called q40_reset : press the RESET button!!\n"
 		"*******************************************\n");
 	Q40_LED_ON();
 	while (1)
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index f9277e8..ca0966c 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -8,6 +8,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 
diff --git a/arch/m68k/sun3x/dvma.c b/arch/m68k/sun3x/dvma.c
index 117481e..d5ddcda 100644
--- a/arch/m68k/sun3x/dvma.c
+++ b/arch/m68k/sun3x/dvma.c
@@ -15,7 +15,6 @@
 #include <linux/bitops.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
-#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include <asm/sun3x.h>
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 064f591..efeb603 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -566,7 +566,7 @@ config RAMBASE
 	  processor address space.
 
 config RAMSIZE
-	hex "Size of RAM (in bytes)"
+	hex "Size of RAM (in bytes), or 0 for automatic"
 	default "0x400000"
 	help
 	  Define the size of the system RAM. If you select 0 then the
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index ce404bc..1404257 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -94,7 +94,7 @@ cflags-$(CONFIG_M520x)		:= $(call cc-option,-mcpu=5208,-m5200)
 cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= $(call cc-option,-mcpu=5249,-m5200)
 cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
-cflags-$(CONFIG_M5272)		:= $(call cc-option,-mcpu=5271,-m5200)
+cflags-$(CONFIG_M5272)		:= $(call cc-option,-mcpu=5272,-m5307)
 cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
 cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= $(call cc-option,-m5307,-m5200)
diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c
index aaf38bb..fc61541 100644
--- a/arch/m68knommu/kernel/dma.c
+++ b/arch/m68knommu/kernel/dma.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
diff --git a/arch/m68knommu/kernel/entry.S b/arch/m68knommu/kernel/entry.S
index 56043ad..aff6f57 100644
--- a/arch/m68knommu/kernel/entry.S
+++ b/arch/m68knommu/kernel/entry.S
@@ -145,6 +145,6 @@ ENTRY(ret_from_user_signal)
 	trap #0
 
 ENTRY(ret_from_user_rt_signal)
-	move #__NR_rt_sigreturn,%d0
+	movel #__NR_rt_sigreturn,%d0
 	trap #0
 
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 5c9ecd4..6aa6613 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -23,11 +23,11 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -221,6 +221,10 @@ int copy_thread(unsigned long clone_flags,
 
 	p->thread.usp = usp;
 	p->thread.ksp = (unsigned long)childstack;
+
+	if (clone_flags & CLONE_SETTLS)
+		task_thread_info(p)->tp_value = regs->d5;
+
 	/*
 	 * Must save the current SFC/DFC value, NOT the value when
 	 * the parent was last descheduled - RGH  10-08-96
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index 4d38289..f6be124 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -116,12 +116,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-		/* when I and D space are separate, these will need to be fixed. */
-		case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-		case PTRACE_PEEKDATA:
-			ret = generic_ptrace_peekdata(child, addr, data);
-			break;
-
 		/* read the word at location addr in the USER area. */
 		case PTRACE_PEEKUSR: {
 			unsigned long tmp;
@@ -160,12 +154,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
-		/* when I and D space are separate, this will have to be fixed. */
-		case PTRACE_POKETEXT: /* write the word at location addr. */
-		case PTRACE_POKEDATA:
-			ret = generic_ptrace_pokedata(child, addr, data);
-			break;
-
 		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 			ret = -EIO;
 			if ((addr & 3) || addr < 0 ||
@@ -202,66 +190,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			}
 			break;
 
-		case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-		case PTRACE_CONT: { /* restart after signal. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			if (request == PTRACE_SYSCALL)
-				set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			else
-				clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			child->exit_code = data;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		/*
-		 * make the child exit.  Best I can do is send it a sigkill. 
-		 * perhaps it should be put in the status that it wants to 
-		 * exit.
-		 */
-		case PTRACE_KILL: {
-			long tmp;
-
-			ret = 0;
-			if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-				break;
-			child->exit_code = SIGKILL;
-			/* make sure the single step bit is not set. */
-			tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-			wake_up_process(child);
-			break;
-		}
-
-		case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-			long tmp;
-
-			ret = -EIO;
-			if (!valid_signal(data))
-				break;
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-			tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
-			put_reg(child, PT_SR, tmp);
-
-			child->exit_code = data;
-			/* give it a chance to run. */
-			wake_up_process(child);
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_DETACH:	/* detach a process that was attached. */
-			ret = ptrace_detach(child, data);
-			break;
-
 		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		  	int i;
 			unsigned long tmp;
@@ -319,8 +247,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 #endif
 
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->tp_value,
+			       (unsigned long __user *)data);
+		break;
+
 		default:
-			ret = -EIO;
+			ret = ptrace_request(child, request, addr, data);
 			break;
 	}
 	return ret;
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index b67cbc7..d65e9c4 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -27,142 +27,6 @@
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 
-/*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to
- * handle more than 4 system call parameters, so these system calls
- * used a memory block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct *arg)
-{
-	struct mmap_arg_struct a;
-	int error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-				a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp, *outp, *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc (uint call, int first, int second,
-			int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			return sys_semop (first, (struct sembuf *)ptr, second);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void **) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf *) ptr, 
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				if (!ptr)
-					return -EINVAL;
-				if (copy_from_user (&tmp,
-						    (struct ipc_kludge *)ptr,
-						    sizeof (tmp)))
-					return -EFAULT;
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-				}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, ptr, second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			}
-		case SHMDT:
-			return sys_shmdt (ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second, ptr);
-		default:
-			return -ENOSYS;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int
 sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
@@ -190,3 +54,39 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 			: "d" (__a), "d" (__b), "d" (__c));
 	return __res;
 }
+
+asmlinkage unsigned long sys_get_thread_area(void)
+{
+	return current_thread_info()->tp_value;
+}
+
+asmlinkage int sys_set_thread_area(unsigned long tp)
+{
+	current_thread_info()->tp_value = tp;
+	return 0;
+}
+
+/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
+   D1 (newval).  */
+asmlinkage int
+sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
+		      unsigned long __user * mem)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long mem_value;
+
+	down_read(&mm->mmap_sem);
+
+	mem_value = *mem;
+	if (mem_value == oldval)
+		*mem = newval;
+
+	up_read(&mm->mmap_sem);
+	return mem_value;
+}
+
+asmlinkage int sys_atomic_barrier(void)
+{
+	/* no code needed for uniprocs */
+	return 0;
+}
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 486837e..b30b3eb 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -100,7 +100,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -108,7 +108,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* sys_swapon */
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
@@ -351,6 +351,10 @@ ENTRY(sys_call_table)
 	.long sys_pwritev		/* 330 */
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
+	.long sys_get_thread_area
+	.long sys_set_thread_area
+	.long sys_atomic_cmpxchg_32	/* 335 */
+	.long sys_atomic_barrier
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/mm/fault.c b/arch/m68knommu/mm/fault.c
index 6f6673c..bc05cf7 100644
--- a/arch/m68knommu/mm/fault.c
+++ b/arch/m68knommu/mm/fault.c
@@ -2,7 +2,7 @@
  *  linux/arch/m68knommu/mm/fault.c
  *
  *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com) 
+ *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com)
  *
  *  Based on:
  *
@@ -36,7 +36,7 @@ asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
 			      unsigned long error_code)
 {
 #ifdef DEBUG
-	printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
+	printk(KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
 		regs->sr, regs->pc, address, error_code);
 #endif
 
@@ -44,11 +44,11 @@ asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-	if ((unsigned long) address < PAGE_SIZE) {
+	if ((unsigned long) address < PAGE_SIZE)
 		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-	} else
+	else
 		printk(KERN_ALERT "Unable to handle kernel access");
-	printk(KERN_ALERT " at virtual address %08lx\n",address);
+	printk(KERN_ALERT " at virtual address %08lx\n", address);
 	die_if_kernel("Oops", regs, error_code);
 	do_exit(SIGKILL);
 
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index f3236d0..8a6653f 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -29,7 +29,7 @@
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 
 #include <asm/setup.h>
 #include <asm/segment.h>
diff --git a/arch/m68knommu/mm/kmap.c b/arch/m68knommu/mm/kmap.c
index bc32f38..902c1df 100644
--- a/arch/m68knommu/mm/kmap.c
+++ b/arch/m68knommu/mm/kmap.c
@@ -9,7 +9,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include <asm/setup.h>
diff --git a/arch/m68knommu/mm/memory.c b/arch/m68knommu/mm/memory.c
index f93b88b..8f7949e 100644
--- a/arch/m68knommu/mm/memory.c
+++ b/arch/m68knommu/mm/memory.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 
 #include <asm/segment.h>
 #include <asm/page.h>
@@ -24,7 +23,6 @@
 
 /*
  * Map some physical address range into the kernel address space.
- * The code is copied and adapted from map_chunk().
  */
 
 unsigned long kernel_map(unsigned long paddr, unsigned long size,
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 92614de..71d2ba4 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -15,10 +15,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -74,9 +77,152 @@ static struct platform_device m520x_fec = {
 	.resource		= m520x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m520x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    62
+#define MCFQSPI_CS1    63
+#define MCFQSPI_CS2    44
+
+static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	}
+}
+
+static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m520x_cs_control = {
+	.setup                  = m520x_cs_setup,
+	.teardown               = m520x_cs_teardown,
+	.select                 = m520x_cs_select,
+	.deselect               = m520x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m520x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 3,
+	.cs_control		= &m520x_cs_control,
+};
+
+static struct platform_device m520x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m520x_qspi_resources),
+	.resource		= m520x_qspi_resources,
+	.dev.platform_data	= &m520x_qspi_data,
+};
+
+static void __init m520x_qspi_init(void)
+{
+	u16 par;
+	/* setup Port QS for QSPI with gpio CS control */
+	writeb(0x3f, MCF_IPSBAR + MCF_GPIO_PAR_QSPI);
+	/* make U1CTS and U2RTS gpio for cs_control */
+	par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+	par &= 0x00ff;
+	writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m520x_devices[] __initdata = {
 	&m520x_uart,
 	&m520x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m520x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -147,6 +293,9 @@ void __init config_BSP(char *commandp, int size)
 	mach_reset = m520x_cpu_reset;
 	m520x_uarts_init();
 	m520x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m520x_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 6ba84f2..8980f6d 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -16,10 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -75,9 +78,173 @@ static struct platform_device m523x_fec = {
 	.resource		= m523x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m523x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    91
+#define MCFQSPI_CS1    92
+#define MCFQSPI_CS2    103
+#define MCFQSPI_CS3    99
+
+static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m523x_cs_control = {
+	.setup                  = m523x_cs_setup,
+	.teardown               = m523x_cs_teardown,
+	.select                 = m523x_cs_select,
+	.deselect               = m523x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m523x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m523x_cs_control,
+};
+
+static struct platform_device m523x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m523x_qspi_resources),
+	.resource		= m523x_qspi_resources,
+	.dev.platform_data	= &m523x_qspi_data,
+};
+
+static void __init m523x_qspi_init(void)
+{
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
 static struct platform_device *m523x_devices[] __initdata = {
 	&m523x_uart,
 	&m523x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m523x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -114,6 +281,9 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m523x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m523x_qspi_init();
+#endif
 	platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 646f5ba..ceb31e5 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -12,10 +12,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -37,8 +40,196 @@ static struct platform_device m5249_uart = {
 	.dev.platform_data	= m5249_uart_platform,
 };
 
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+	{
+		.start		= 0xe0000300,
+		.end		= 0xe0000300 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINTC2_GPIOIRQ6,
+		.end		= MCFINTC2_GPIOIRQ6,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5249_smc91x = {
+	.name			= "smc91x",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
+	.resource		= m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m5249_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_QSPI,
+		.end		= MCF_IRQ_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    29
+#define MCFQSPI_CS1    24
+#define MCFQSPI_CS2    21
+#define MCFQSPI_CS3    22
+
+static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m5249_cs_control = {
+	.setup                  = m5249_cs_setup,
+	.teardown               = m5249_cs_teardown,
+	.select                 = m5249_cs_select,
+	.deselect               = m5249_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m5249_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m5249_cs_control,
+};
+
+static struct platform_device m5249_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5249_qspi_resources),
+	.resource		= m5249_qspi_resources,
+	.dev.platform_data	= &m5249_qspi_data,
+};
+
+static void __init m5249_qspi_init(void)
+{
+	/* QSPI irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+	       MCF_MBAR + MCFSIM_QSPIICR);
+	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m5249_devices[] __initdata = {
 	&m5249_uart,
+#ifdef CONFIG_M5249C3
+	&m5249_smc91x,
+#endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m5249_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -67,6 +258,24 @@ static void __init m5249_uarts_init(void)
 
 /***************************************************************************/
 
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+	u32  gpio;
+
+	/* Set the GPIO line as interrupt source for smc91x device */
+	gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+
+	gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+	writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
 static void __init m5249_timers_init(void)
 {
 	/* Timer1 is always used as system timer */
@@ -100,6 +309,12 @@ void __init config_BSP(char *commandp, int size)
 	mach_reset = m5249_cpu_reset;
 	m5249_timers_init();
 	m5249_uarts_init();
+#ifdef CONFIG_M5249C3
+	m5249_smc91x_init();
+#endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m5249_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index fa51be1..3d9c35c 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -16,10 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -106,12 +109,188 @@ static struct platform_device m527x_fec[] = {
 	},
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m527x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#if defined(CONFIG_M5271)
+#define MCFQSPI_CS0    91
+#define MCFQSPI_CS1    92
+#define MCFQSPI_CS2    99
+#define MCFQSPI_CS3    103
+#elif defined(CONFIG_M5275)
+#define MCFQSPI_CS0    59
+#define MCFQSPI_CS1    60
+#define MCFQSPI_CS2    61
+#define MCFQSPI_CS3    62
+#endif
+
+static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m527x_cs_control = {
+	.setup                  = m527x_cs_setup,
+	.teardown               = m527x_cs_teardown,
+	.select                 = m527x_cs_select,
+	.deselect               = m527x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m527x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m527x_cs_control,
+};
+
+static struct platform_device m527x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m527x_qspi_resources),
+	.resource		= m527x_qspi_resources,
+	.dev.platform_data	= &m527x_qspi_data,
+};
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
 static struct platform_device *m527x_devices[] __initdata = {
 	&m527x_uart,
 	&m527x_fec[0],
 #ifdef CONFIG_FEC2
 	&m527x_fec[1],
 #endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m527x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -187,6 +366,9 @@ void __init config_BSP(char *commandp, int size)
 	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m527x_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index 6e608d1..76b7433 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -17,10 +17,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -76,10 +79,141 @@ static struct platform_device m528x_fec = {
 	.resource		= m528x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m528x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    147
+#define MCFQSPI_CS1    148
+#define MCFQSPI_CS2    149
+#define MCFQSPI_CS3    150
+
+static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
+}
+
+static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
+}
+
+static struct mcfqspi_cs_control m528x_cs_control = {
+	.setup                  = m528x_cs_setup,
+	.teardown               = m528x_cs_teardown,
+	.select                 = m528x_cs_select,
+	.deselect               = m528x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m528x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m528x_cs_control,
+};
+
+static struct platform_device m528x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m528x_qspi_resources),
+	.resource		= m528x_qspi_resources,
+	.dev.platform_data	= &m528x_qspi_data,
+};
+
+static void __init m528x_qspi_init(void)
+{
+	/* setup Port QS for QSPI with gpio CS control */
+	__raw_writeb(0x07, MCFGPIO_PQSPAR);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
 static struct platform_device *m528x_devices[] __initdata = {
 	&m528x_uart,
 	&m528x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m528x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -174,6 +308,9 @@ static int __init init_BSP(void)
 	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m528x_qspi_init();
+#endif
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 667db65..6de5269 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -14,5 +14,7 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y	+= config.o gpio.o
+obj-y			+= config.o gpio.o
+obj-$(CONFIG_NETtel)	+= nettel.o
+obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 
diff --git a/arch/m68knommu/platform/5307/nettel.c b/arch/m68knommu/platform/5307/nettel.c
new file mode 100644
index 0000000..e925ea4
--- /dev/null
+++ b/arch/m68knommu/platform/5307/nettel.c
@@ -0,0 +1,153 @@
+/***************************************************************************/
+
+/*
+ *	nettel.c -- startup code support for the NETtel boards
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define	NETTEL_SMC0_ADDR	0x30600300
+#define	NETTEL_SMC0_IRQ		29
+
+#define	NETTEL_SMC1_ADDR	0x30600000
+#define	NETTEL_SMC1_IRQ		27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define	SMC91xx_BANKSELECT	14
+#define	SMC91xx_BASEADDR	2
+#define	SMC91xx_BASEMAC		4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+	{
+		.start		= NETTEL_SMC0_ADDR,
+		.end		= NETTEL_SMC0_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC0_IRQ,
+		.end		= NETTEL_SMC0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+	{
+		.start		= NETTEL_SMC1_ADDR,
+		.end		= NETTEL_SMC1_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC1_IRQ,
+		.end		= NETTEL_SMC1_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device nettel_smc91x[] = {
+	{
+		.name			= "smc91x",
+		.id			= 0,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
+		.resource		= nettel_smc91x_0_resources,
+	},
+	{
+		.name			= "smc91x",
+		.id			= 1,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
+		.resource		= nettel_smc91x_1_resources,
+	},
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+	&nettel_smc91x[0],
+	&nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+	u16 *macp;
+
+	macp = (u16 *) flashaddr;
+	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+		macp = (u16 *) &nettel_macdefault[0];
+
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+	mcf_setppdata(0, 0x0080);
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+	mcf_setppdata(0x0080, 0);
+
+	/* Set correct chip select timing for SMC9196 accesses */
+	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+
+	/* Set the SMC interrupts to be auto-vectored */
+	mcf_autovector(NETTEL_SMC0_IRQ);
+	mcf_autovector(NETTEL_SMC1_IRQ);
+
+	/* Set MAC addresses from flash for both interfaces */
+	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+	nettel_smc91x_init();
+	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+	return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index d632948..ca51323 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -21,12 +21,15 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfwdebug.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -82,9 +85,127 @@ static struct platform_device m532x_fec = {
 	.resource		= m532x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m532x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    84
+#define MCFQSPI_CS1    85
+#define MCFQSPI_CS2    86
+
+static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m532x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
+}
+
+static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
+}
+
+static struct mcfqspi_cs_control m532x_cs_control = {
+	.setup                  = m532x_cs_setup,
+	.teardown               = m532x_cs_teardown,
+	.select                 = m532x_cs_select,
+	.deselect               = m532x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m532x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 3,
+	.cs_control		= &m532x_cs_control,
+};
+
+static struct platform_device m532x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m532x_qspi_resources),
+	.resource		= m532x_qspi_resources,
+	.dev.platform_data	= &m532x_qspi_data,
+};
+
+static void __init m532x_qspi_init(void)
+{
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x01f0, MCF_GPIO_PAR_QSPI);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
 	&m532x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m532x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -158,6 +279,9 @@ static int __init init_BSP(void)
 {
 	m532x_uarts_init();
 	m532x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m532x_qspi_init();
+#endif
 	platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/68360/commproc.c b/arch/m68knommu/platform/68360/commproc.c
index 6acb8d2..f27e688 100644
--- a/arch/m68knommu/platform/68360/commproc.c
+++ b/arch/m68knommu/platform/68360/commproc.c
@@ -110,7 +110,7 @@ void m360_cpm_reset()
 	/* 	pte = find_pte(&init_mm, host_page_addr); */
 	/* 	pte_val(*pte) |= _PAGE_NO_CACHE; */
 	/* 	flush_tlb_page(current->mm->mmap, host_buffer); */
-	
+
 	/* Tell everyone where the comm processor resides.
 	*/
 /* 	cpmp = (cpm360_t *)commproc; */
@@ -191,7 +191,7 @@ cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
 	 */
 	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
 #endif
-	
+
 }
 
 /* The CPM can generate the error interrupt when there is a race condition
diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index 1143f77..6f22970 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -107,7 +107,6 @@ void init_IRQ(void)
 	_ramvec[vba+CPMVEC_PIO_PC7]     = inthandler;  /* pio - pc7 */
 	_ramvec[vba+CPMVEC_PIO_PC6]     = inthandler;  /* pio - pc6 */
 	_ramvec[vba+CPMVEC_TIMER3]      = inthandler;  /* timer 3 */
-	_ramvec[vba+CPMVEC_RISCTIMER]   = inthandler;  /* reserved */
 	_ramvec[vba+CPMVEC_PIO_PC5]     = inthandler;  /* pio - pc5 */
 	_ramvec[vba+CPMVEC_PIO_PC4]     = inthandler;  /* pio - pc4 */
 	_ramvec[vba+CPMVEC_RESERVED2]   = inthandler;  /* reserved */
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cd5837e..505a085 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -5,7 +5,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 
 config MICROBLAZE
 	def_bool y
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -14,6 +14,8 @@ config MICROBLAZE
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select TRACING_SUPPORT
 
 config SWAP
@@ -73,12 +75,6 @@ config LOCKDEP_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config PCI
-	def_bool n
-
-config NO_DMA
-	def_bool y
-
 config DTC
 	def_bool y
 
@@ -130,6 +126,7 @@ config CMDLINE_FORCE
 
 config OF
 	def_bool y
+	select OF_FLATTREE
 
 config PROC_DEVICETREE
 	bool "Support for device tree in /proc"
@@ -145,7 +142,6 @@ menu "Advanced setup"
 
 config ADVANCED_OPTIONS
 	bool "Prompt for advanced kernel configuration options"
-	depends on MMU
 	help
 	  This option will enable prompting for a variety of advanced kernel
 	  configuration options.  These options can cause the kernel to not
@@ -157,6 +153,15 @@ config ADVANCED_OPTIONS
 comment "Default settings for advanced configuration options are used"
 	depends on !ADVANCED_OPTIONS
 
+config XILINX_UNCACHED_SHADOW
+	bool "Are you using uncached shadow for RAM ?"
+	depends on ADVANCED_OPTIONS && !MMU
+	default n
+	help
+	  This is needed to be able to allocate uncachable memory regions.
+	  The feature requires the design to define the RAM memory controller
+	  window to be twice as large as the actual physical memory.
+
 config HIGHMEM_START_BOOL
 	bool "Set high memory pool address"
 	depends on ADVANCED_OPTIONS && HIGHMEM
@@ -174,7 +179,7 @@ config HIGHMEM_START
 
 config LOWMEM_SIZE_BOOL
 	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the maximum amount of memory which
 	  will be used as "low memory", that is, memory which the kernel can
@@ -186,7 +191,6 @@ config LOWMEM_SIZE_BOOL
 
 config LOWMEM_SIZE
 	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	depends on MMU
 	default "0x30000000"
 
 config KERNEL_START_BOOL
@@ -207,7 +211,7 @@ config KERNEL_START
 
 config TASK_SIZE_BOOL
 	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
+	depends on ADVANCED_OPTIONS && MMU
 	help
 	  This option allows you to set the amount of virtual address space
 	  allocated to user tasks.  This can be useful in optimizing the
@@ -217,42 +221,34 @@ config TASK_SIZE_BOOL
 
 config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
-	depends on MMU
 	default "0x80000000"
 
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
+endmenu
 
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	depends on MMU
-	default "0xff100000" if NOT_COHERENT_CACHE
+source "mm/Kconfig"
 
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
+menu "Exectuable file formats"
 
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	depends on MMU
-	default "0x00200000" if NOT_COHERENT_CACHE
+source "fs/Kconfig.binfmt"
 
 endmenu
 
-source "mm/Kconfig"
+menu "Bus Options"
 
-menu "Exectuable file formats"
+config PCI
+	bool "PCI support"
 
-source "fs/Kconfig.binfmt"
+config PCI_DOMAINS
+	def_bool PCI
+
+config PCI_SYSCALL
+	def_bool PCI
+
+config PCI_XILINX
+	bool "Xilinx PCI host bridge support"
+	depends on PCI
+
+source "drivers/pci/Kconfig"
 
 endmenu
 
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d2d6cfc..72f6e85 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -50,6 +50,7 @@ libs-y += $(LIBGCC)
 core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
 core-y += arch/microblaze/platform/
+core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
 
@@ -83,7 +84,7 @@ define archhelp
   echo '* linux.bin    - Create raw binary'
   echo '  linux.bin.gz - Create compressed raw binary'
   echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
-  echo '                   - stripped elf with fdt blob
+  echo '                   - stripped elf with fdt blob'
   echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
   echo '  *_defconfig      - Select default config from arch/microblaze/configs'
   echo ''
@@ -93,3 +94,5 @@ define archhelp
   echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
   echo '  (minus the .dts extension).'
 endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 902cf98..57f50c2 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb
 endif
 
 $(obj)/linux.bin: vmlinux FORCE
-	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
-	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
@@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC     $@
 $(obj)/%.dtb: $(dtstree)/%.dts FORCE
 	$(call if_changed,dtc)
 
-clean-kernel += linux.bin linux.bin.gz simpleImage.*
-
-clean-files += *.dtb simpleImage.*.unstrip
+clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index bb7c374..3c91cf6 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:28:50 2009
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:22:14 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -19,8 +19,10 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_CSUM=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -51,7 +54,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -64,10 +66,12 @@ CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_INITRAMFS_COMPRESSION_NONE is not set
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y
 # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
 # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -90,21 +94,22 @@ CONFIG_EVENTFD=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
 #
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
@@ -123,14 +128,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -139,11 +171,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_PLATFORM_GENERIC=y
 CONFIG_OPT_LIB_FUNCTION=y
 CONFIG_OPT_LIB_ASM=y
-CONFIG_ALLOW_EDIT_AUTO=y
-
-#
-# Automatic platform settings from Kconfig.auto
-#
 
 #
 # Definitions for MICROBLAZE0
@@ -203,12 +230,11 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -218,13 +244,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -289,7 +322,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -308,11 +347,17 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -333,6 +378,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -346,7 +392,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_ETHOC is not set
@@ -358,13 +424,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_XILINX_EMACLITE=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -408,6 +475,8 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -433,8 +502,13 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -466,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -526,8 +601,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -538,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -561,6 +635,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
@@ -638,11 +713,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -660,8 +737,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -680,10 +761,30 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
 CONFIG_DEBUG_BOOTMEM=y
@@ -694,7 +795,11 @@ CONFIG_DEBUG_BOOTMEM=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
@@ -800,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index adb839b..dd3a494 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:29:43 2009
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:25:12 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -19,8 +19,10 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_CSUM=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,6 +48,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -53,7 +56,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -81,16 +83,18 @@ CONFIG_EVENTFD=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -116,14 +120,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,7 +163,10 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_PLATFORM_GENERIC=y
 # CONFIG_SELFMOD is not set
 # CONFIG_OPT_LIB_FUNCTION is not set
-# CONFIG_ALLOW_EDIT_AUTO is not set
+
+#
+# Definitions for MICROBLAZE0
+#
 CONFIG_KERNEL_BASE_ADDR=0x90000000
 CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
@@ -174,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y
 #
 # Advanced setup
 #
+# CONFIG_ADVANCED_OPTIONS is not set
 
 #
 # Default settings for advanced configuration options are used
 #
+CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -190,7 +227,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -201,13 +237,20 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -274,9 +317,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -301,9 +341,9 @@ CONFIG_STANDALONE=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -382,11 +422,16 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -407,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -432,13 +478,14 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -482,6 +529,8 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -508,8 +557,13 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -559,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -616,7 +671,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -628,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -656,6 +711,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -672,11 +728,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -695,12 +753,17 @@ CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
+# CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -719,10 +782,32 @@ CONFIG_DEBUG_SG=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -734,7 +819,11 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
@@ -838,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
index e522108..4efe96a 100644
--- a/arch/microblaze/include/asm/cache.h
+++ b/arch/microblaze/include/asm/cache.h
@@ -15,7 +15,7 @@
 
 #include <asm/registers.h>
 
-#define L1_CACHE_SHIFT	2
+#define L1_CACHE_SHIFT 5
 /* word-granular cache in microblaze */
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 
diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
index 78a0384..123b2fe 100644
--- a/arch/microblaze/include/asm/device.h
+++ b/arch/microblaze/include/asm/device.h
@@ -12,25 +12,15 @@
 struct device_node;
 
 struct dev_archdata {
-	/* Optional pointer to an OF device node */
-	struct device_node	*of_node;
+	/* DMA operations on that device */
+	struct dma_map_ops	*dma_ops;
+	void                    *dma_data;
 };
 
 struct pdev_archdata {
+	u64 dma_mask;
 };
 
-static inline void dev_archdata_set_node(struct dev_archdata *ad,
-					 struct device_node *np)
-{
-	ad->of_node = np;
-}
-
-static inline struct device_node *
-dev_archdata_get_node(const struct dev_archdata *ad)
-{
-	return ad->of_node;
-}
-
 #endif /* _ASM_MICROBLAZE_DEVICE_H */
 
 
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index d00e400..18b3731 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -1 +1,153 @@
-#include <asm-generic/dma-mapping-broken.h>
+/*
+ * Implements the generic device dma API for microblaze and the pci
+ *
+ * Copyright (C) 2009-2010 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009-2010 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file is base on powerpc and x86 dma-mapping.h versions
+ * Copyright (C) 2004 IBM
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
+#define _ASM_MICROBLAZE_DMA_MAPPING_H
+
+/*
+ * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * Documentation/DMA-API.txt for documentation.
+ */
+
+#include <linux/types.h>
+#include <linux/cache.h>
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#define __dma_alloc_coherent(dev, gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+extern struct dma_map_ops *dma_ops;
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_map_ops dma_direct_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(!dev) || !dev->archdata.dma_ops)
+		return NULL;
+
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(!ops))
+		return 0;
+	if (!ops->dma_supported)
+		return 1;
+	return ops->dma_supported(dev, mask);
+}
+
+#ifdef CONFIG_PCI
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+#endif
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	if (unlikely(ops == NULL))
+		return -EIO;
+	if (ops->set_dma_mask)
+		return ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	if (ops->mapping_error)
+		return ops->mapping_error(dev, dma_addr);
+
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+					dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *memory;
+
+	BUG_ON(!ops);
+
+	memory = ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, memory);
+	return memory;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
+	BUG_ON(!ops);
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+	ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return L1_CACHE_BYTES;
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif	/* _ASM_MICROBLAZE_DMA_MAPPING_H */
diff --git a/arch/microblaze/include/asm/dma.h b/arch/microblaze/include/asm/dma.h
index 08c073b..0d73d0c 100644
--- a/arch/microblaze/include/asm/dma.h
+++ b/arch/microblaze/include/asm/dma.h
@@ -18,4 +18,10 @@
 #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
 #endif
 
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy     (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_DMA_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 61abbd2..ec89f2a 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -21,7 +21,7 @@
  * places
  */
 
-#define PER_CPU(var) per_cpu__##var
+#define PER_CPU(var) var
 
 # ifndef __ASSEMBLY__
 DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 90731df..4c7b5d0 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
 #if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h
index 8dbb6e7..ad3fd61 100644
--- a/arch/microblaze/include/asm/futex.h
+++ b/arch/microblaze/include/asm/futex.h
@@ -55,7 +55,7 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 		__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index fc9997b..00b5398 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -15,7 +15,23 @@
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
+#include <asm-generic/iomap.h>
 
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET	0
+#else
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
 
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
@@ -92,6 +108,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
 #define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
 
+#define ioread16be(addr)	__raw_readw((u16 *)(addr))
+#define ioread32be(addr)	__raw_readl((u32 *)(addr))
+#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
+
 /* These are the definitions for the x86 IO instructions
  * inb/inw/inl/outb/outw/outl, the "string" versions
  * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
@@ -118,15 +139,10 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 
 #ifdef CONFIG_MMU
 
-#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
-#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
 #define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
 #define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
 
-#define __page_address(page) \
-		(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
-#define page_to_phys(page)	virt_to_phys((void *)__page_address(page))
 #define page_to_bus(page)	(page_to_phys(page))
 #define bus_to_virt(addr)	(phys_to_virt(addr))
 
@@ -217,7 +233,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
  * Little endian
  */
 
-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
 #define in_le32(a) __le32_to_cpu(__raw_readl(a))
@@ -227,15 +243,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-/* FIXME */
-static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port);
-}
-
-static inline void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
+#define ioport_map(port, nr)	((void __iomem *)(port))
+#define ioport_unmap(addr)
 
 #endif /* _ASM_MICROBLAZE_IO_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 90f0505..31a35c3 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -14,6 +14,12 @@
 
 #include <linux/interrupt.h>
 
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
 extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
@@ -21,7 +27,8 @@ extern unsigned int nr_irq;
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
@@ -40,4 +47,32 @@ static inline void irq_dispose_mapping(unsigned int virq)
 	return;
 }
 
+struct irq_host;
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+					irq_hw_number_t hwirq);
+
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize);
+
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/lmb.h b/arch/microblaze/include/asm/lmb.h
deleted file mode 100644
index a0a0a92..0000000
--- a/arch/microblaze/include/asm/lmb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
-
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT	0xFFFFFFFF
-
-#endif /* _ASM_MICROBLAZE_LMB_H */
-
-
diff --git a/arch/microblaze/include/asm/memblock.h b/arch/microblaze/include/asm/memblock.h
new file mode 100644
index 0000000..f9c2fa3
--- /dev/null
+++ b/arch/microblaze/include/asm/memblock.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
+
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT	0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
+
+
diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h
index ba917cf..73cb980 100644
--- a/arch/microblaze/include/asm/of_device.h
+++ b/arch/microblaze/include/asm/of_device.h
@@ -21,9 +21,8 @@
  * probed using OF properties.
  */
 struct of_device {
-	struct device_node	*node; /* to be obsoleted */
-	u64			dma_mask; /* DMA mask */
 	struct device		dev; /* Generic device interface */
+	struct pdev_archdata	archdata;
 };
 
 extern ssize_t of_device_get_modalias(struct of_device *ofdev,
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 9b66c0f..464ff32 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -31,6 +31,11 @@
 
 #ifndef __ASSEMBLY__
 
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
@@ -62,12 +67,6 @@ extern unsigned int __page_offset;
 #define PAGE_OFFSET	CONFIG_KERNEL_START
 
 /*
- * MAP_NR -- given an address, calculate the index of the page struct which
- * points to the address's page.
- */
-#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
-
-/*
  * The basic type of a PTE - 32 bit physical addressing.
  */
 typedef unsigned long pte_basic_t;
@@ -76,14 +75,7 @@ typedef unsigned long pte_basic_t;
 
 #endif /* CONFIG_MMU */
 
-#  ifndef CONFIG_MMU
-#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#  define free_user_page(page, addr)		free_page(addr)
-#  else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-#  endif /* CONFIG_MMU */
-
+# define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
 # define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
 
 # define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
@@ -154,7 +146,11 @@ extern int page_is_ram(unsigned long pfn);
 # define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
 
 #  ifdef CONFIG_MMU
-#  define virt_to_page(kaddr) 	(mem_map +  MAP_NR(kaddr))
+
+#  define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
+#  define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
+
 #  else /* CONFIG_MMU */
 #  define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
 #  define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 7ad28f6..0c77cda 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -1 +1,196 @@
+#ifndef _ASM_MICROBLAZE_PCI_BRIDGE_H
+#define _ASM_MICROBLAZE_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
 #include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+
+	int self_busno;
+
+	void __iomem *io_base_virt;
+	resource_size_t io_base_phys;
+
+	resource_size_t pci_io_size;
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+
+	/* Some machines have a special region to forward the ISA
+	 * "memory" cycles such as VGA memory regions. Left to 0
+	 * if unsupported
+	 */
+	resource_size_t isa_mem_phys;
+	resource_size_t isa_mem_size;
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs
+	 *   on the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define INDIRECT_TYPE_EXT_REG		0x00000002
+#define INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource io_resource;
+	struct resource mem_resources[3];
+	int global_number;	/* PCI domain number */
+};
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller *hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node *node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_setup_phb_resources(struct pci_controller *hose);
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+	pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+	pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+	return pci_flags & flag;
+}
+
+extern struct list_head hose_list;
+
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index 9f0df5f..5a388ee 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1,169 @@
-#include <asm-generic/pci.h>
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on powerpc version
+ */
+
+#ifndef __ASM_MICROBLAZE_PCI_H
+#define __ASM_MICROBLAZE_PCI_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses() \
+	(pci_has_flag(PCI_REASSIGN_ALL_BUS))
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
+			   size_t count);
+extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
+			   size_t count);
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma,
+				      enum pci_mmap_state mmap_state);
+
+#define HAVE_PCI_LEGACY	1
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern int remove_phb_dynamic(struct pci_controller *phb);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+extern int pci_bus_find_capability(struct pci_bus *bus,
+						unsigned int devfn, int cap);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_setup_bus_devices(struct pci_bus *bus);
+extern void pcibios_setup_bus_self(struct pci_bus *bus);
+
+/* This part of code was originaly in xilinx-pci.h */
+#ifdef CONFIG_PCI_XILINX
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_PCI_H */
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 7547f50..c614a89 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -19,6 +19,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/cache.h>
+#include <asm/pgtable.h>
 
 #define PGDIR_ORDER	0
 
@@ -107,22 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd)
 #define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-		unsigned long address)
-{
-	pte_t *pte;
-	extern int mem_init_done;
-	extern void *early_get_page(void);
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL |
-					__GFP_REPEAT | __GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
 
 static inline struct page *pte_alloc_one(struct mm_struct *mm,
 		unsigned long address)
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index cc3a4df..ca2d928 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -16,6 +16,10 @@
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
+#ifndef __ASSEMBLY__
+extern int mem_init_done;
+#endif
+
 #ifndef CONFIG_MMU
 
 #define pgd_present(pgd)	(1) /* pages are always present on non MMU */
@@ -51,6 +55,8 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 #define arch_enter_lazy_cpu_mode()	do {} while (0)
 
+#define pgprot_noncached_wc(prot)	prot
+
 #else /* CONFIG_MMU */
 
 #include <asm-generic/4level-fixup.h>
@@ -68,7 +74,6 @@ static inline int pte_file(pte_t pte) { return 0; }
 
 extern unsigned long va_to_phys(unsigned long address);
 extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
 
 /*
  * The following only work if pte_present() is true.
@@ -85,11 +90,25 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 #define VMALLOC_START	(CONFIG_KERNEL_START + \
 				max(32 * 1024 * 1024UL, memory_size))
 #define VMALLOC_END	ioremap_bot
-#define VMALLOC_VMADDR(x) ((unsigned long)(x))
 
 #endif /* __ASSEMBLY__ */
 
 /*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_GUARDED | _PAGE_NO_CACHE | \
+							_PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) \
+			(__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+					_PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) \
+			 (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+							_PAGE_NO_CACHE))
+
+/*
  * The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
  * table containing PTEs, together with a set of 16 segment registers, to
  * define the virtual to physical address mapping.
@@ -397,7 +416,7 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr,
 	mts     rmsr, %2\n\
 	nop"
 	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
-	: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
 	: "cc");
 
 	return old;
@@ -493,15 +512,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
 /*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/*
  * Encode and decode a swap entry.
  * Note that the bits we use in a PTE for representing a swap entry
  * must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
@@ -514,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
 
-
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk(unsigned long addr, int len);
 extern unsigned long iopa(unsigned long addr);
-/* extern unsigned long mm_ptov(unsigned long addr) \
-	__attribute__ ((const)); TBD */
 
 /* Values for nocacheflag and cmode */
 /* These are not used by the APUS kernel_map, but prevents
@@ -533,18 +535,6 @@ extern unsigned long iopa(unsigned long addr);
 #define	IOMAP_NOCACHE_NONSER	2
 #define	IOMAP_NO_COPYBACK	3
 
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
-				int nocacheflag, unsigned long *memavailp);
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode(unsigned long address, unsigned long size,
-				unsigned int cmode);
-
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 #define kern_addr_valid(addr)	(1)
 
@@ -558,26 +548,15 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size,
 void do_page_fault(struct pt_regs *regs, unsigned long address,
 		   unsigned long error_code);
 
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags);
-
-void __init adjust_total_lowmem(void);
 void mapin_ram(void);
 int map_page(unsigned long va, phys_addr_t pa, int flags);
 
 extern int mem_init_done;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
 
 asmlinkage void __init mmu_init(void);
 
 void __init *early_get_page(void);
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
-void consistent_sync(void *vaddr, size_t size, int direction);
-void consistent_sync_page(struct page *page, unsigned long offset,
-	size_t size, int direction);
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
@@ -586,6 +565,14 @@ void consistent_sync_page(struct page *page, unsigned long offset,
 #ifndef __ASSEMBLY__
 #include <asm-generic/pgtable.h>
 
+extern unsigned long ioremap_bot, ioremap_base;
+
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+void consistent_free(size_t size, void *vaddr);
+void consistent_sync(void *vaddr, size_t size, int direction);
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction);
+
 void setup_memory(void);
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 563c6b9..8eeb092 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -14,7 +14,6 @@
 #include <asm/ptrace.h>
 #include <asm/setup.h>
 #include <asm/registers.h>
-#include <asm/segment.h>
 #include <asm/entry.h>
 #include <asm/current.h>
 
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index ef3ec1d..e7d67a3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -26,30 +26,25 @@
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strncasecmp((s1), (s2), (l))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-extern struct device_node *allnodes;	/* temporary while merging */
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
 /* Other Prototypes */
 extern int early_uartlite_console(void);
 
-extern struct resource *request_OF_resource(struct device_node *node,
-				int index, const char *name_postfix);
-extern int release_OF_resource(struct device_node *node, int index);
+#ifdef CONFIG_PCI
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+					u8 *bus, u8 *devfn);
+extern struct device_node *pci_busdev_to_OF_node(struct pci_bus *bus,
+							int devfn);
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *dev);
+extern void pci_create_OF_bus_map(void);
+#endif
 
 /*
  * OF address retreival & translation
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 35d786f..dc4a890 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1 +1,3 @@
 #include <asm-generic/scatterlist.h>
+
+#define ISA_DMA_THRESHOLD	(~0UL)
diff --git a/arch/microblaze/include/asm/segment.h b/arch/microblaze/include/asm/segment.h
deleted file mode 100644
index 0e7102c..0000000
--- a/arch/microblaze/include/asm/segment.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEGMENT_H
-#define _ASM_MICROBLAZE_SEGMENT_H
-
-# ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-/*
- * On Microblaze the fs value is actually the top of the corresponding
- * address space.
- *
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
- */
-# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
-
-#  ifndef CONFIG_MMU
-#  define KERNEL_DS	MAKE_MM_SEG(0)
-#  define USER_DS	KERNEL_DS
-#  else
-#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
-#  endif
-
-# define get_ds()	(KERNEL_DS)
-# define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(val)	(current_thread_info()->addr_limit = (val))
-
-# define segment_eq(a, b)	((a).seg == (b).seg)
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SEGMENT_H */
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index 15797068..48c4f03 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -12,6 +12,7 @@
 #include <asm/registers.h>
 #include <asm/setup.h>
 #include <asm/irqflags.h>
+#include <asm/cache.h>
 
 #include <asm-generic/cmpxchg.h>
 #include <asm-generic/cmpxchg-local.h>
@@ -87,10 +88,23 @@ void free_initmem(void);
 extern char *klimit;
 extern void ret_from_fork(void);
 
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
 #ifdef CONFIG_DEBUG_FS
 extern struct dentry *of_debugfs_root;
 #endif
 
 #define arch_align_stack(x) (x)
 
+/*
+ * MicroBlaze doesn't handle unaligned accesses in hardware.
+ *
+ * Based on this we force the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	2
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
 #endif /* _ASM_MICROBLAZE_SYSTEM_H */
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 6e92885..8a8e9fc 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -19,7 +19,6 @@
 #ifndef __ASSEMBLY__
 # include <linux/types.h>
 # include <asm/processor.h>
-# include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -60,6 +59,10 @@ struct cpu_context {
 	__u32	fsr;
 };
 
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
 struct thread_info {
 	struct task_struct	*task; /* main task structure */
 	struct exec_domain	*exec_domain; /* execution domain */
@@ -119,7 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 /* restore singlestep on return to user mode */
 #define TIF_SINGLESTEP		4
 #define TIF_IRET		5 /* return with iret */
-#define TIF_MEMDIE		6
+#define TIF_MEMDIE		6	/* is terminating due to OOM killer */
 #define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
 #define TIF_SECCOMP		10      /* secure computing */
 #define TIF_FREEZE		14	/* Freezing for suspend */
diff --git a/arch/microblaze/include/asm/tlbflush.h b/arch/microblaze/include/asm/tlbflush.h
index eb31a0e..2e1353c 100644
--- a/arch/microblaze/include/asm/tlbflush.h
+++ b/arch/microblaze/include/asm/tlbflush.h
@@ -23,7 +23,8 @@
 extern void _tlbie(unsigned long address);
 extern void _tlbia(void);
 
-#define __tlbia()	_tlbia()
+#define __tlbia()	{ preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x)	{ _tlbie(x); }
 
 static inline void local_flush_tlb_all(void)
 	{ __tlbia(); }
@@ -31,14 +32,14 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	{ __tlbia(); }
 static inline void local_flush_tlb_page(struct vm_area_struct *vma,
 				unsigned long vmaddr)
-	{ _tlbie(vmaddr); }
+	{ __tlbie(vmaddr); }
 static inline void local_flush_tlb_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 	{ __tlbia(); }
 
 #define flush_tlb_kernel_range(start, end)	do { } while (0)
 
-#define update_mmu_cache(vma, addr, pte)	do { } while (0)
+#define update_mmu_cache(vma, addr, ptep)	do { } while (0)
 
 #define flush_tlb_all local_flush_tlb_all
 #define flush_tlb_mm local_flush_tlb_mm
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 371bd6e..26460d1 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -22,101 +22,73 @@
 #include <asm/mmu.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/segment.h>
 #include <linux/string.h>
 
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
-#define __clear_user(addr, n)	(memset((void *)(addr), 0, (n)), 0)
-
-#ifndef CONFIG_MMU
-
-extern int ___range_ok(unsigned long addr, unsigned long size);
-
-#define __range_ok(addr, size) \
-		___range_ok((unsigned long)(addr), (unsigned long)(size))
-
-#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
-
-/* Undefined function to trigger linker error */
-extern int bad_user_access_length(void);
-
-/* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr)				\
-({							\
-	int __gu_err = 0;				\
-	switch (sizeof(*(ptr))) {			\
-	case 1:						\
-	case 2:						\
-	case 4:						\
-		(var) = *(ptr);				\
-		break;					\
-	case 8:						\
-		memcpy((void *) &(var), (ptr), 8);	\
-		break;					\
-	default:					\
-		(var) = 0;				\
-		__gu_err = __get_user_bad();		\
-		break;					\
-	}						\
-	__gu_err;					\
-})
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
 
-#define __get_user_bad()	(bad_user_access_length(), (-EFAULT))
+#  ifndef CONFIG_MMU
+#  define KERNEL_DS	MAKE_MM_SEG(0)
+#  define USER_DS	KERNEL_DS
+#  else
+#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
+#  endif
 
-/* FIXME is not there defined __pu_val */
-#define __put_user(var, ptr)					\
-({								\
-	int __pu_err = 0;					\
-	switch (sizeof(*(ptr))) {				\
-	case 1:							\
-	case 2:							\
-	case 4:							\
-		*(ptr) = (var);					\
-		break;						\
-	case 8: {						\
-		typeof(*(ptr)) __pu_val = (var);		\
-		memcpy(ptr, &__pu_val, sizeof(__pu_val));	\
-		}						\
-		break;						\
-	default:						\
-		__pu_err = __put_user_bad();			\
-		break;						\
-	}							\
-	__pu_err;						\
-})
+# define get_ds()	(KERNEL_DS)
+# define get_fs()	(current_thread_info()->addr_limit)
+# define set_fs(val)	(current_thread_info()->addr_limit = (val))
 
-#define __put_user_bad()	(bad_user_access_length(), (-EFAULT))
+# define segment_eq(a, b)	((a).seg == (b).seg)
 
-#define put_user(x, ptr)	__put_user((x), (ptr))
-#define get_user(x, ptr)	__get_user((x), (ptr))
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
 
-#define copy_to_user(to, from, n)	(memcpy((to), (from), (n)), 0)
-#define copy_from_user(to, from, n)	(memcpy((to), (from), (n)), 0)
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
 
-#define __copy_to_user(to, from, n)	(copy_to_user((to), (from), (n)))
-#define __copy_from_user(to, from, n)	(copy_from_user((to), (from), (n)))
-#define __copy_to_user_inatomic(to, from, n) \
-			(__copy_to_user((to), (from), (n)))
-#define __copy_from_user_inatomic(to, from, n) \
-			(__copy_from_user((to), (from), (n)))
+#ifndef CONFIG_MMU
 
-static inline unsigned long clear_user(void *addr, unsigned long size)
+/* Check against bounds of physical memory */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
 {
-	if (access_ok(VERIFY_WRITE, addr, size))
-		size = __clear_user(addr, size);
-	return size;
+	return ((addr < memory_start) ||
+		((addr + size) > memory_end));
 }
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
+#define __range_ok(addr, size) \
+		___range_ok((unsigned long)(addr), (unsigned long)(size))
 
-extern long strncpy_from_user(char *dst, const char *src, long count);
-extern long strnlen_user(const char *src, long count);
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 
-#else /* CONFIG_MMU */
+#else
 
 /*
  * Address is valid if:
@@ -129,22 +101,119 @@ extern long strnlen_user(const char *src, long count);
 /* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
  type?"WRITE":"READ",addr,size,get_fs().seg)) */
 
-/*
- * All the __XXX versions macros/functions below do not perform
- * access checking. It is assumed that the necessary checks have been
- * already performed before the finction (macro) is called.
- */
+#endif
 
-#define get_user(x, ptr)						\
-({									\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))			\
-		? __get_user((x), (ptr)) : -EFAULT;			\
+#ifdef CONFIG_MMU
+# define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
+#else
+# define __FIXUP_SECTION	".section .discard,\"ax\"\n"
+# define __EX_TABLE_SECTION	".section .discard,\"a\"\n"
+#endif
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+							unsigned long n)
+{
+	/* normal memset with two words to __ex_table */
+	__asm__ __volatile__ (				\
+			"1:	sb	r0, %2, r0;"	\
+			"	addik	%0, %0, -1;"	\
+			"	bneid	%0, 1b;"	\
+			"	addik	%2, %2, 1;"	\
+			"2:			"	\
+			__EX_TABLE_SECTION		\
+			".word	1b,2b;"			\
+			".previous;"			\
+		: "=r"(n)				\
+		: "0"(n), "r"(to)
+	);
+	return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+							unsigned long n)
+{
+	might_sleep();
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+
+	return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err), "=r"(__gu_val)		\
+		: "r"(__gu_ptr), "i"(-EFAULT)			\
+	);							\
 })
 
-#define put_user(x, ptr)						\
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x, ptr)						\
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_check(x, ptr, size)					\
 ({									\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))			\
-		? __put_user((x), (ptr)) : -EFAULT;			\
+	unsigned long __gu_val = 0;					\
+	const typeof(*(ptr)) __user *__gu_addr = (ptr);			\
+	int __gu_err = 0;						\
+									\
+	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__get_user_asm("lbu", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		case 2:							\
+			__get_user_asm("lhu", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		case 4:							\
+			__get_user_asm("lw", __gu_addr, __gu_val,	\
+				       __gu_err);			\
+			break;						\
+		default:						\
+			__gu_err = __user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__gu_err = -EFAULT;					\
+	}								\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
 })
 
 #define __get_user(x, ptr)						\
@@ -163,28 +232,102 @@ extern long strnlen_user(const char *src, long count);
 		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	default:							\
-		__gu_val = 0; __gu_err = -EINVAL;			\
+		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
 	}								\
 	x = (__typeof__(*(ptr))) __gu_val;				\
 	__gu_err;							\
 })
 
-#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err)		\
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
+({								\
+	__asm__ __volatile__ (					\
+			"1:"	insn	" %1, %2, r0;"		\
+			"	addk	%0, r0, r0;"		\
+			"2:			"		\
+			__FIXUP_SECTION				\
+			"3:	brid	2b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,3b;"				\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+	);							\
+})
+
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)		\
+({								\
+	__asm__ __volatile__ ("	lwi	%0, %1, 0;"		\
+			"1:	swi	%0, %2, 0;"		\
+			"	lwi	%0, %1, 4;"		\
+			"2:	swi	%0, %2, 4;"		\
+			"	addk	%0, r0, r0;"		\
+			"3:			"		\
+			__FIXUP_SECTION				\
+			"4:	brid	3b;"			\
+			"	addik	%0, r0, %3;"		\
+			".previous;"				\
+			__EX_TABLE_SECTION			\
+			".word	1b,4b,2b,4b;"			\
+			".previous;"				\
+		: "=&r"(__gu_err)				\
+		: "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
+		);						\
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr)						\
+	__put_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __put_user_check(x, ptr, size)					\
 ({									\
-	__asm__ __volatile__ (						\
-			"1:"	insn	" %1, %2, r0;			\
-				addk	%0, r0, r0;			\
-			2:						\
-			.section .fixup,\"ax\";				\
-			3:	brid	2b;				\
-				addik	%0, r0, %3;			\
-			.previous;					\
-			.section __ex_table,\"a\";			\
-			.word	1b,3b;					\
-			.previous;"					\
-		: "=r"(__gu_err), "=r"(__gu_val)			\
-		: "r"(__gu_ptr), "i"(-EFAULT)				\
-	);								\
+	typeof(*(ptr)) __pu_val;					\
+	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("sb", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 2:							\
+			__put_user_asm("sh", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 4:							\
+			__put_user_asm("sw", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 8:							\
+			__put_user_asm_8(__pu_addr, __pu_val, __pu_err);\
+			break;						\
+		default:						\
+			__pu_err = __user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
 })
 
 #define __put_user(x, ptr)						\
@@ -195,7 +338,7 @@ extern long strnlen_user(const char *src, long count);
 	case 1:								\
 		__put_user_asm("sb", (ptr), __gu_val, __gu_err);	\
 		break;							\
-	case 2: 							\
+	case 2:								\
 		__put_user_asm("sh", (ptr), __gu_val, __gu_err);	\
 		break;							\
 	case 4:								\
@@ -205,121 +348,70 @@ extern long strnlen_user(const char *src, long count);
 		__put_user_asm_8((ptr), __gu_val, __gu_err);		\
 		break;							\
 	default:							\
-		__gu_err = -EINVAL;					\
+		/*__gu_err = -EINVAL;*/	__gu_err = __user_bad();	\
 	}								\
 	__gu_err;							\
 })
 
-#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err)	\
-({							\
-__asm__ __volatile__ ("	lwi	%0, %1, 0;		\
-		1:	swi	%0, %2, 0;		\
-			lwi	%0, %1, 4;		\
-		2:	swi	%0, %2, 4;		\
-			addk	%0,r0,r0;		\
-		3:					\
-		.section .fixup,\"ax\";			\
-		4:	brid	3b;			\
-			addik	%0, r0, %3;		\
-		.previous;				\
-		.section __ex_table,\"a\";		\
-		.word	1b,4b,2b,4b;			\
-		.previous;"				\
-	: "=&r"(__gu_err)				\
-	: "r"(&__gu_val),				\
-	"r"(__gu_ptr), "i"(-EFAULT)			\
-	);						\
-})
-
-#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)	\
-({								\
-	__asm__ __volatile__ (					\
-			"1:"	insn	" %1, %2, r0;		\
-				addk	%0, r0, r0;		\
-			2:					\
-			.section .fixup,\"ax\";			\
-			3:	brid	2b;			\
-				addik	%0, r0, %3;		\
-			.previous;				\
-			.section __ex_table,\"a\";		\
-			.word	1b,3b;				\
-			.previous;"				\
-		: "=r"(__gu_err)				\
-		: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT)	\
-	);							\
-})
 
-/*
- * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
- */
-static inline int clear_user(char *to, int size)
-{
-	if (size && access_ok(VERIFY_WRITE, to, size)) {
-		__asm__ __volatile__ ("				\
-				1:				\
-					sb	r0, %2, r0;	\
-					addik	%0, %0, -1;	\
-					bneid	%0, 1b;		\
-					addik	%2, %2, 1;	\
-				2:				\
-				.section __ex_table,\"a\";	\
-				.word	1b,2b;			\
-				.section .text;"		\
-			: "=r"(size)				\
-			: "0"(size), "r"(to)
-		);
-	}
-	return size;
-}
-
-#define __copy_from_user(to, from, n)	copy_from_user((to), (from), (n))
+/* copy_to_from_user */
+#define __copy_from_user(to, from, n)	\
+	__copy_tofrom_user((__force void __user *)(to), \
+				(void __user *)(from), (n))
 #define __copy_from_user_inatomic(to, from, n) \
 		copy_from_user((to), (from), (n))
 
-#define copy_to_user(to, from, n)					\
-	(access_ok(VERIFY_WRITE, (to), (n)) ?				\
-		__copy_tofrom_user((void __user *)(to),			\
-			(__force const void __user *)(from), (n))	\
-		: -EFAULT)
+static inline long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_from_user(to, from, n);
+	return n;
+}
 
-#define __copy_to_user(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user(to, from, n)	\
+		__copy_tofrom_user((void __user *)(to), \
+			(__force const void __user *)(from), (n))
 #define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
 
-#define copy_from_user(to, from, n)					\
-	(access_ok(VERIFY_READ, (from), (n)) ?				\
-		__copy_tofrom_user((__force void __user *)(to),		\
-			(void __user *)(from), (n))			\
-		: -EFAULT)
+static inline long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_to_user(to, from, n);
+	return n;
+}
 
+/*
+ * Copy a null terminated string from userspace.
+ */
 extern int __strncpy_user(char *to, const char __user *from, int len);
-extern int __strnlen_user(const char __user *sstr, int len);
-
-#define strncpy_from_user(to, from, len)	\
-		(access_ok(VERIFY_READ, from, 1) ?	\
-			__strncpy_user(to, from, len) : -EFAULT)
-#define strnlen_user(str, len)	\
-		(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
 
-#endif /* CONFIG_MMU */
+#define __strncpy_from_user	__strncpy_user
 
-extern unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size);
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
 
 /*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * Return the size of a string (including the ending 0)
  *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
+ * Return 0 on exception, a value greater than N if too long
  */
-struct exception_table_entry {
-	unsigned long insn, fixup;
-};
+extern int __strnlen_user(const char __user *sstr, int len);
+
+static inline long strnlen_user(const char __user *src, long n)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return 0;
+	return __strnlen_user(src, n);
+}
 
 #endif  /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index b07594e..e51bc15 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -14,7 +14,7 @@ endif
 
 extra-y := head.o vmlinux.lds
 
-obj-y += exceptions.o \
+obj-y += dma.o exceptions.o \
 	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
 	of_platform.o process.o prom.o prom_parse.o ptrace.o \
 	setup.o signal.o sys_microblaze.o timer.o traps.o reset.o
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 7bc7b68..c1b459c 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -16,6 +16,7 @@
 #include <linux/hardirq.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
 
 int main(int argc, char *argv[])
 {
@@ -90,6 +91,7 @@ int main(int argc, char *argv[])
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+	DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
 	BLANK();
 
 	/* struct cpu_context */
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index d9d6383..109876e 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -15,25 +15,6 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-static inline void __invalidate_flush_icache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wic	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __flush_dcache(unsigned int addr)
-{
-	__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
-					: : "r" (addr));
-}
-
-static inline void __invalidate_dcache(unsigned int baseaddr,
-						unsigned int offset)
-{
-	__asm__ __volatile__ ("wdc.clear	%0, %1;"	\
-					: : "r" (baseaddr), "r" (offset));
-}
-
 static inline void __enable_icache_msr(void)
 {
 	__asm__ __volatile__ ("	msrset	r0, %0;		\
@@ -115,13 +96,16 @@ static inline void __disable_dcache_nomsr(void)
 }
 
 
-/* Helper macro for computing the limits of cache range loops */
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
 #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)	\
 do {									\
 	int align = ~(cache_line_length - 1);				\
 	end = min(start + cache_size, end);				\
 	start &= align;							\
-	end = ((end & align) + cache_line_length);			\
 } while (0);
 
 /*
@@ -130,9 +114,9 @@ do {									\
  */
 #define CACHE_ALL_LOOP(cache_size, line_length, op)			\
 do {									\
-	unsigned int len = cache_size;					\
+	unsigned int len = cache_size - line_length;			\
 	int step = -line_length;					\
-	BUG_ON(step >= 0);						\
+	WARN_ON(step >= 0);						\
 									\
 	__asm__ __volatile__ (" 1:      " #op " %0, r0;			\
 					bgtid   %0, 1b;			\
@@ -141,30 +125,26 @@ do {									\
 					: "memory");			\
 } while (0);
 
-
-#define CACHE_ALL_LOOP2(cache_size, line_length, op)			\
-do {									\
-	unsigned int len = cache_size;					\
-	int step = -line_length;					\
-	BUG_ON(step >= 0);						\
-									\
-	__asm__ __volatile__ (" 1:      " #op " r0, %0;			\
-					bgtid   %0, 1b;			\
-					addk    %0, %0, %1;		\
-					" : : "r" (len), "r" (step)	\
-					: "memory");			\
-} while (0);
-
-/* for wdc.flush/clear */
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to substract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
 #define CACHE_RANGE_LOOP_2(start, end, line_length, op)			\
 do {									\
 	int step = -line_length;					\
-	int count = end - start;					\
-	BUG_ON(count <= 0);						\
+	int align = ~(line_length - 1);					\
+	int count;							\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
+	count = end - start;						\
+	WARN_ON(count < 0);						\
 									\
-	__asm__ __volatile__ (" 1:	" #op " %0, %1;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
+	__asm__ __volatile__ (" 1:	" #op "	%0, %1;			\
+					bgtid	%1, 1b;			\
+					addk	%1, %1, %2;		\
 					" : : "r" (start), "r" (count),	\
 					"r" (step) : "memory");		\
 } while (0);
@@ -172,22 +152,27 @@ do {									\
 /* It is used only first parameter for OP - for wic, wdc */
 #define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
 do {									\
-	int step = -line_length;					\
-	int count = end - start;					\
-	BUG_ON(count <= 0);						\
+	int volatile temp;						\
+	int align = ~(line_length - 1);					\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
+	WARN_ON(end - start < 0);					\
 									\
-	__asm__ __volatile__ (" 1:	addk	%0, %0, %1;		\
-					" #op " %0, r0;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
-					" : : "r" (start), "r" (count),	\
-					"r" (step) : "memory");		\
+	__asm__ __volatile__ (" 1:	" #op "	%1, r0;			\
+					cmpu	%0, %1, %2;		\
+					bgtid	%0, 1b;			\
+					addk	%1, %1, %3;		\
+				" : : "r" (temp), "r" (start), "r" (end),\
+					"r" (line_length) : "memory");	\
 } while (0);
 
+#define ASM_LOOP
+
 static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -197,8 +182,13 @@ static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
 	local_irq_save(flags);
 	__disable_icache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
@@ -207,7 +197,9 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 				unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -217,7 +209,13 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 	local_irq_save(flags);
 	__disable_icache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
@@ -226,25 +224,41 @@ static void __flush_icache_range_nomsr_irq(unsigned long start,
 static void __flush_icache_range_noirq(unsigned long start,
 				unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.icache_line_length, cpuinfo.icache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic);
+#else
+	for (i = start; i < end; i += cpuinfo.icache_line_length)
+		__asm__ __volatile__ ("wic	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __flush_icache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_msr();
 	local_irq_restore(flags);
 }
@@ -252,35 +266,59 @@ static void __flush_icache_all_msr_irq(void)
 static void __flush_icache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_icache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
-
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_icache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __flush_icache_all_noirq(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic);
+#else
+	for (i = 0; i < cpuinfo.icache_size;
+		 i += cpuinfo.icache_line_length)
+			__asm__ __volatile__ ("wic	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_all_msr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_msr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_msr();
 	local_irq_restore(flags);
 }
@@ -288,70 +326,111 @@ static void __invalidate_dcache_all_msr_irq(void)
 static void __invalidate_dcache_all_nomsr_irq(void)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
 
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
-
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc);
-
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
 }
 
 static void __invalidate_dcache_all_noirq_wt(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
-/* FIXME this is weird - should be only wdc but not work
- * MS: I am getting bus errors and other weird things */
+/* FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
 static void __invalidate_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
-	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
-					wdc.clear)
-
-#if 0
-	unsigned int i;
-
-	pr_debug("%s\n", __func__);
-
-	/* Just loop through cache size and invalidate it */
-	for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
-			__invalidate_dcache(0, i);
+#ifdef ASM_LOOP
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+					wdc)
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc	%0, r0;" \
+					: : "r" (i));
 #endif
 }
 
 static void __invalidate_dcache_range_wb(unsigned long start,
 						unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc.clear	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
 							unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 	CACHE_LOOP_LIMITS(start, end,
@@ -360,7 +439,13 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 	local_irq_save(flags);
 	__disable_dcache_msr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_msr();
 	local_irq_restore(flags);
@@ -370,7 +455,9 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 							unsigned long end)
 {
 	unsigned long flags;
-
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
@@ -380,7 +467,13 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 	local_irq_save(flags);
 	__disable_dcache_nomsr();
 
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc	%0, r0;"	\
+				: : "r" (i));
+#endif
 
 	__enable_dcache_nomsr();
 	local_irq_restore(flags);
@@ -388,19 +481,38 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 
 static void __flush_dcache_all_wb(void)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s\n", __func__);
+#ifdef ASM_LOOP
 	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 				wdc.flush);
+#else
+	for (i = 0; i < cpuinfo.dcache_size;
+		 i += cpuinfo.dcache_line_length)
+			__asm__ __volatile__ ("wdc.flush	%0, r0;" \
+					: : "r" (i));
+#endif
 }
 
 static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 {
+#ifndef ASM_LOOP
+	int i;
+#endif
 	pr_debug("%s: start 0x%x, end 0x%x\n", __func__,
 				(unsigned int)start, (unsigned int) end);
 
 	CACHE_LOOP_LIMITS(start, end,
 			cpuinfo.dcache_line_length, cpuinfo.dcache_size);
+#ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
+#else
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
+		__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
+				: : "r" (i));
+#endif
 }
 
 /* struct for wb caches and for wt caches */
@@ -504,7 +616,7 @@ const struct scache wt_nomsr_noirq = {
 #define CPUVER_7_20_A	0x0c
 #define CPUVER_7_20_D	0x0f
 
-#define INFO(s)	printk(KERN_INFO "cache: " s " \n");
+#define INFO(s)	printk(KERN_INFO "cache: " s "\n");
 
 void microblaze_cache_init(void)
 {
@@ -543,4 +655,13 @@ void microblaze_cache_init(void)
 			}
 		}
 	}
+/* FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+	/* invalidate_dcache(); */
+	enable_dcache();
+
+	invalidate_icache();
+	enable_icache();
 }
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 991d713..255ef88 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index 0c912b2..4216eb1 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	if (cpuinfo.use_icache)
 		count += seq_printf(m,
-				"Icache:\t\t%ukB\n",
-				cpuinfo.icache_size >> 10);
+				"Icache:\t\t%ukB\tline length:\t%dB\n",
+				cpuinfo.icache_size >> 10,
+				cpuinfo.icache_line_length);
 	else
 		count += seq_printf(m, "Icache:\t\tno\n");
 
 	if (cpuinfo.use_dcache) {
 		count += seq_printf(m,
-				"Dcache:\t\t%ukB\n",
-				cpuinfo.dcache_size >> 10);
+				"Dcache:\t\t%ukB\tline length:\t%dB\n",
+				cpuinfo.dcache_size >> 10,
+				cpuinfo.dcache_line_length);
 		if (cpuinfo.dcache_wb)
 			count += seq_printf(m, "\t\twrite-back\n");
 		else
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
new file mode 100644
index 0000000..79c7465
--- /dev/null
+++ b/arch/microblaze/kernel/dma.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2009-2010 PetaLogix
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
+ *
+ * Provide default implementations of the DMA mapping callbacks for
+ * directly mapped busses.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/dma-debug.h>
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Generic direct DMA implementation
+ *
+ * This implementation supports a per-device offset that can be applied if
+ * the address at which memory is visible to devices is not 0. Platform code
+ * can set archdata.dma_data to an unsigned long holding the offset. By
+ * default the offset is PCI_DRAM_OFFSET.
+ */
+static inline void __dma_sync_page(unsigned long paddr, unsigned long offset,
+				size_t size, enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		flush_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range(paddr + offset, paddr + offset + size);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static unsigned long get_dma_direct_offset(struct device *dev)
+{
+	if (likely(dev))
+		return (unsigned long)dev->archdata.dma_data;
+
+	return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */
+}
+
+#define NOT_COHERENT_CACHE
+
+static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag)
+{
+#ifdef NOT_COHERENT_CACHE
+	return consistent_alloc(flag, size, dma_handle);
+#else
+	void *ret;
+	struct page *page;
+	int node = dev_to_node(dev);
+
+	/* ignore region specifiers */
+	flag  &= ~(__GFP_HIGHMEM);
+
+	page = alloc_pages_node(node, flag, get_order(size));
+	if (page == NULL)
+		return NULL;
+	ret = page_address(page);
+	memset(ret, 0, size);
+	*dma_handle = virt_to_phys(ret) + get_dma_direct_offset(dev);
+
+	return ret;
+#endif
+}
+
+static void dma_direct_free_coherent(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle)
+{
+#ifdef NOT_COHERENT_CACHE
+	consistent_free(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	/* FIXME this part of code is untested */
+	for_each_sg(sgl, sg, nents, i) {
+		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
+							sg->length, direction);
+	}
+
+	return nents;
+}
+
+static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
+{
+}
+
+static int dma_direct_dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline dma_addr_t dma_direct_map_page(struct device *dev,
+					     struct page *page,
+					     unsigned long offset,
+					     size_t size,
+					     enum dma_data_direction direction,
+					     struct dma_attrs *attrs)
+{
+	__dma_sync_page(page_to_phys(page), offset, size, direction);
+	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+}
+
+static inline void dma_direct_unmap_page(struct device *dev,
+					 dma_addr_t dma_address,
+					 size_t size,
+					 enum dma_data_direction direction,
+					 struct dma_attrs *attrs)
+{
+/* There is not necessary to do cache cleanup
+ *
+ * phys_to_virt is here because in __dma_sync_page is __virt_to_phys and
+ * dma_address is physical address
+ */
+	__dma_sync_page(dma_address, 0 , size, direction);
+}
+
+struct dma_map_ops dma_direct_ops = {
+	.alloc_coherent	= dma_direct_alloc_coherent,
+	.free_coherent	= dma_direct_free_coherent,
+	.map_sg		= dma_direct_map_sg,
+	.unmap_sg	= dma_direct_unmap_sg,
+	.dma_supported	= dma_direct_dma_supported,
+	.map_page	= dma_direct_map_page,
+	.unmap_page	= dma_direct_unmap_page,
+};
+EXPORT_SYMBOL(dma_direct_ops);
+
+/* Number of entries preallocated for DMA-API debugging */
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+       return 0;
+}
+fs_initcall(dma_init);
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 95b0855..8cc18cd 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -122,7 +122,7 @@ ENTRY(_interrupt)
 
 ret_from_intr:
 	lwi	r11, r1, PT_MODE
-	bneid	r11, 3f
+	bneid	r11, no_intr_resched
 
 	lwi	r6, r31, TS_THREAD_INFO	/* get thread info */
 	lwi	r19, r6, TI_FLAGS	/* get flags in thread info */
@@ -133,16 +133,18 @@ ret_from_intr:
 	bralid	r15, schedule
 	nop
 1:	andi	r11, r19, _TIF_SIGPENDING
-	beqid	r11, no_intr_reshed
+	beqid	r11, no_intr_resched
 	addk	r5, r1, r0
 	addk	r7, r0, r0
 	bralid	r15, do_signal
 	addk	r6, r0, r0
 
-no_intr_reshed:
+no_intr_resched:
+	/* Disable interrupts, we are now committed to the state restore */
+	disable_irq
+
 	/* save mode indicator */
 	lwi	r11, r1, PT_MODE
-3:
 	swi	r11, r0, PER_CPU(KM)
 
 	/* save r31 */
@@ -474,6 +476,8 @@ ENTRY(ret_from_fork)
 	nop
 
 work_pending:
+	enable_irq
+
 	andi	r11, r19, _TIF_NEED_RESCHED
 	beqi	r11, 1f
 	bralid	r15, schedule
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 3bad4ff..c0ede25 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -305,7 +305,7 @@ C_ENTRY(_user_exception):
 	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	/* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
@@ -322,8 +322,7 @@ C_ENTRY(_user_exception):
 	rtid	r11, 0
 	nop
 3:
-	add	r11, r0, CURRENT_TASK	 /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO /* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */
 	lwi	r11, r11, TI_FLAGS	 /* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 4f
@@ -382,60 +381,50 @@ C_ENTRY(ret_from_trap):
 /* See if returning to kernel mode, if so, skip resched &c.  */
 	bnei	r11, 2f;
 
+	swi	r3, r1, PTO + PT_R3
+	swi	r4, r1, PTO + PT_R4
+
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	# FIXME: Restructure all these flag checks.
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* FIXME: Restructure all these flag checks. */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
 	beqi	r11, 1f
 
-	swi	r3, r1, PTO + PT_R3
-	swi	r4, r1, PTO + PT_R4
 	brlid	r15, do_syscall_trace_leave
 	addik	r5, r1, PTO + PT_R0
-	lwi	r3, r1, PTO + PT_R3
-	lwi	r4, r1, PTO + PT_R4
 1:
-
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	/* get thread info from current task */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	bralid	r15, schedule;	/* Call scheduler */
 	nop;				/* delay slot */
-	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
-	lwi	r4, r1, PTO + PT_R4;
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	/* get thread info from current task*/
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
 
-	swi	r3, r1, PTO + PT_R3; /* store syscall result */
-	swi	r4, r1, PTO + PT_R4;
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
+
+/* Finally, return to user state.  */
+1:
 	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
 	lwi	r4, r1, PTO + PT_R4;
 
-/* Finally, return to user state.  */
-1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 	RESTORE_REGS;
@@ -565,7 +554,7 @@ C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
 	addi	r11, r0, 1;						\
 	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	\
 	/* Save away the syscall number.  */				\
 	swi	r0, r1, PTO+PT_R0;					\
 	tovirt(r1,r1)
@@ -673,9 +662,7 @@ C_ENTRY(ret_from_exc):
 
 	/* We're returning to user mode, so check for various conditions that
 	   trigger rescheduling. */
-	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
@@ -685,8 +672,7 @@ C_ENTRY(ret_from_exc):
 	nop;				/* delay slot */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
@@ -705,15 +691,13 @@ C_ENTRY(ret_from_exc):
 	 * store return registers separately because this macros is use
 	 * for others exceptions */
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
@@ -802,7 +786,7 @@ C_ENTRY(_interrupt):
 	swi	r11, r0, TOPHYS(PER_CPU(KM));
 
 2:
-	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	swi	r0, r1, PTO + PT_R0;
 	tovirt(r1,r1)
 	la	r5, r1, PTO;
@@ -817,8 +801,7 @@ ret_from_irq:
 	lwi	r11, r1, PTO + PT_MODE;
 	bnei	r11, 2f;
 
-	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO;
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
 	lwi	r11, r11, TI_FLAGS; /* MS: get flags from thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f
@@ -826,8 +809,7 @@ ret_from_irq:
 	nop; /* delay slot */
 
     /* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK;
-	lwi	r11, r11, TS_THREAD_INFO; /* MS: get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO; /* MS: get thread info */
 	lwi	r11, r11, TI_FLAGS; /* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqid	r11, no_intr_resched
@@ -842,8 +824,7 @@ no_intr_resched:
     /* Disable interrupts, we are now committed to the state restore */
 	disable_irq
 	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
-	add	r11, r0, CURRENT_TASK;
-	swi	r11, r0, PER_CPU(CURRENT_SAVE);
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE);
 	VM_OFF;
 	tophys(r1,r1);
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
@@ -853,7 +834,28 @@ no_intr_resched:
 	lwi	r1, r1, PT_R1 - PT_SIZE;
 	bri	6f;
 /* MS: Return to kernel state. */
-2:	VM_OFF /* MS: turn off MMU */
+2:
+#ifdef CONFIG_PREEMPT
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;
+	/* MS: get preempt_count from thread info */
+	lwi	r5, r11, TI_PREEMPT_COUNT;
+	bgti	r5, restore;
+
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	beqi	r5, restore /* if zero jump over */
+
+preempt:
+	/* interrupts are off that's why I am calling preempt_chedule_irq */
+	bralid	r15, preempt_schedule_irq
+	nop
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
+	lwi	r5, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r5, r5, _TIF_NEED_RESCHED;
+	bnei	r5, preempt /* if non zero jump to resched */
+restore:
+#endif
+	VM_OFF /* MS: turn off MMU */
 	tophys(r1,r1)
 	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
 	lwi	r4, r1, PTO + PT_R4;
@@ -915,7 +917,7 @@ C_ENTRY(_debug_exception):
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
 	addi	r11, r0, 1;
 	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r0, r1, PTO+PT_R0;
 	tovirt(r1,r1)
@@ -935,8 +937,7 @@ dbtrap_call:	rtbd	r11, 0;
 	bnei	r11, 2f;
 
 	/* Get current task ptr into r11 */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
@@ -949,8 +950,7 @@ dbtrap_call:	rtbd	r11, 0;
 	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
 
 	/* Maybe handle a signal */
-5:	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
@@ -966,16 +966,14 @@ dbtrap_call:	rtbd	r11, 0;
 	   (in a possibly modified form) after do_signal returns.  */
 
 	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
-	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
-	nop;
+	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 
 /* Finally, return to user state.  */
 1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	add	r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	swi	r11, r0, PER_CPU(CURRENT_SAVE); /* save current */
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
@@ -1007,7 +1005,7 @@ DBTRAP_return:		/* Make global symbol for debugging */
 
 ENTRY(_switch_to)
 	/* prepare return value */
-	addk	r3, r0, r31
+	addk	r3, r0, CURRENT_TASK
 
 	/* save registers in cpu_context */
 	/* use r11 and r12, volatile registers, as temp register */
@@ -1051,10 +1049,10 @@ ENTRY(_switch_to)
 	nop
 	swi	r12, r11, CC_FSR
 
-	/* update r31, the current */
-	lwi	r31, r6, TI_TASK/* give me pointer to task which will be next */
+	/* update r31, the current-give me pointer to task which will be next */
+	lwi	CURRENT_TASK, r6, TI_TASK
 	/* stored it to current_save too */
-	swi	r31, r0, PER_CPU(CURRENT_SAVE)
+	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE)
 
 	/* get new process' cpu context and restore */
 	/* give me start where start context of next task */
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index d9f70f8..02cbdfe 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -121,7 +121,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		}
 		printk(KERN_WARNING "Divide by zero exception " \
 							"in kernel mode.\n");
-		die("Divide by exception", regs, SIGBUS);
+		die("Divide by zero exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_FPU_EXCEPTION:
 		pr_debug(KERN_WARNING "FPU exception\n");
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index 388b31c..515feb4 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -151,13 +151,10 @@ int ftrace_make_nop(struct module *mod,
 	return ret;
 }
 
-static int ret_addr; /* initialized as 0 by default */
-
 /* I believe that first is called ftrace_make_nop before this function */
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	int ret;
-	ret_addr = addr; /* saving where the barrier jump is */
 	pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
 		__func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
 	ret = ftrace_modify_code(rec->ip, imm);
@@ -194,12 +191,9 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	ret = ftrace_modify_code(ip, upper);
 	ret += ftrace_modify_code(ip + 4, lower);
 
-	/* We just need to remove the rtsd r15, 8 by NOP */
-	BUG_ON(!ret_addr);
-	if (ret_addr)
-		ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP);
-	else
-		ret = 1; /* fault */
+	/* We just need to replace the rtsd r15, 8 with NOP */
+	ret += ftrace_modify_code((unsigned long)&ftrace_caller,
+				  MICROBLAZE_NOP);
 
 	/* All changes are done - lets do caches consistent */
 	flush_icache();
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 3091619..1bf7398 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -28,6 +28,7 @@
  * for more details.
  */
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
@@ -49,8 +50,14 @@ swapper_pg_dir:
 
 #endif /* CONFIG_MMU */
 
-	.text
+	__HEAD
 ENTRY(_start)
+#if CONFIG_KERNEL_BASE_ADDR == 0
+	brai	TOPHYS(real_start)
+	.org	0x100
+real_start:
+#endif
+
 	mfs	r1, rmsr
 	andi	r1, r1, ~2
 	mts	rmsr, r1
@@ -99,8 +106,8 @@ no_fdt_arg:
 	tophys(r4,r4)			/* convert to phys address */
 	ori	r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
 _copy_command_line:
-	lbu	r7, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
-	sb	r7, r4, r6		/* addr[r4+r6]= r7*/
+	lbu	r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */
+	sb	r2, r4, r6		/* addr[r4+r6]= r2*/
 	addik	r6, r6, 1		/* increment counting */
 	bgtid	r3, _copy_command_line	/* loop for all entries       */
 	addik	r3, r3, -1		/* descrement loop */
@@ -128,7 +135,7 @@ _copy_bram:
 	 * virtual to physical.
 	 */
 	nop
-	addik	r3, r0, 63		/* Invalidate all TLB entries */
+	addik	r3, r0, MICROBLAZE_TLB_SIZE -1	/* Invalidate all TLB entries */
 _invalidate:
 	mts	rtlbx, r3
 	mts	rtlbhi, r0			/* flush: ensure V is clear   */
@@ -136,6 +143,11 @@ _invalidate:
 	addik	r3, r3, -1
 	/* sync */
 
+	/* Setup the kernel PID */
+	mts	rpid,r0			/* Load the kernel PID */
+	nop
+	bri	4
+
 	/*
 	 * We should still be executing code at physical address area
 	 * RAM_BASEADDR at this point. However, kernel code is at
@@ -146,10 +158,6 @@ _invalidate:
 	addik	r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */
 	tophys(r4,r3)			/* Load the kernel physical address */
 
-	mts	rpid,r0			/* Load the kernel PID */
-	nop
-	bri	4
-
 	/*
 	 * Configure and load two entries into TLB slots 0 and 1.
 	 * In case we are pinning TLBs, these are reserved in by the
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 2b86c03..995a212 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -313,13 +313,13 @@ _hw_exception_handler:
 	mfs	r5, rmsr;
 	nop
 	swi	r5, r1, 0;
-	mfs	r3, resr
+	mfs	r4, resr
 	nop
-	mfs	r4, rear;
+	mfs	r3, rear;
 	nop
 
 #ifndef CONFIG_MMU
-	andi	r5, r3, 0x1000;		/* Check ESR[DS] */
+	andi	r5, r4, 0x1000;		/* Check ESR[DS] */
 	beqi	r5, not_in_delay_slot;	/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
@@ -327,13 +327,14 @@ not_in_delay_slot:
 	swi	r17, r1, PT_R17
 #endif
 
-	andi	r5, r3, 0x1F;		/* Extract ESR[EXC] */
+	andi	r5, r4, 0x1F;		/* Extract ESR[EXC] */
 
 #ifdef CONFIG_MMU
 	/* Calculate exception vector offset = r5 << 2 */
 	addk	r6, r5, r5; /* << 1 */
 	addk	r6, r6, r6; /* << 2 */
 
+#ifdef DEBUG
 /* counting which exception happen */
 	lwi	r5, r0, 0x200 + TOPHYS(r0_ram)
 	addi	r5, r5, 1
@@ -341,6 +342,7 @@ not_in_delay_slot:
 	lwi	r5, r6, 0x200 + TOPHYS(r0_ram)
 	addi	r5, r5, 1
 	swi	r5, r6, 0x200 + TOPHYS(r0_ram)
+#endif
 /* end */
 	/* Load the HW Exception vector */
 	lwi	r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
@@ -376,7 +378,7 @@ handle_other_ex: /* Handle Other exceptions here */
 	swi	r18, r1, PT_R18
 
 	or	r5, r1, r0
-	andi	r6, r3, 0x1F; /* Load ESR[EC] */
+	andi	r6, r4, 0x1F; /* Load ESR[EC] */
 	lwi	r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
 	swi	r7, r1, PT_MODE
 	mfs	r7, rfsr
@@ -426,11 +428,11 @@ handle_other_ex: /* Handle Other exceptions here */
  */
 handle_unaligned_ex:
 	/* Working registers already saved: R3, R4, R5, R6
-	 *  R3 = ESR
-	 *  R4 = EAR
+	 *  R4 = ESR
+	 *  R3 = EAR
 	 */
 #ifdef CONFIG_MMU
-	andi	r6, r3, 0x1000			/* Check ESR[DS] */
+	andi	r6, r4, 0x1000			/* Check ESR[DS] */
 	beqi	r6, _no_delayslot		/* Branch if ESR[DS] not set */
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
@@ -439,7 +441,7 @@ _no_delayslot:
 	RESTORE_STATE;
 	bri	unaligned_data_trap
 #endif
-	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
+	andi	r6, r4, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
 	srl	r6, r6;
 	srl	r6, r6;
@@ -448,33 +450,33 @@ _no_delayslot:
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
 
-	andi	r6, r3, 0x400; /* Extract ESR[S] */
+	andi	r6, r4, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
 ex_lw:
-	andi	r6, r3, 0x800; /* Extract ESR[W] */
+	andi	r6, r4, 0x800; /* Extract ESR[W] */
 	beqi	r6, ex_lhw;
-	lbui	r5, r4, 0; /* Exception address in r4 */
+	lbui	r5, r3, 0; /* Exception address in r3 */
 	/* Load a word, byte-by-byte from destination address
 		and save it in tmp space */
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r5, r4, 1;
+	lbui	r5, r3, 1;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_1);
-	lbui	r5, r4, 2;
+	lbui	r5, r3, 2;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_2);
-	lbui	r5, r4, 3;
+	lbui	r5, r3, 3;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_3);
-	/* Get the destination register value into r3 */
-	lwi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	/* Get the destination register value into r4 */
+	lwi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 	bri	ex_lw_tail;
 ex_lhw:
-	lbui	r5, r4, 0; /* Exception address in r4 */
+	lbui	r5, r3, 0; /* Exception address in r3 */
 	/* Load a half-word, byte-by-byte from destination
 		address and save it in tmp space */
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r5, r4, 1;
+	lbui	r5, r3, 1;
 	sbi	r5, r0, TOPHYS(ex_tmp_data_loc_1);
-	/* Get the destination register value into r3 */
-	lhui	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	/* Get the destination register value into r4 */
+	lhui	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 ex_lw_tail:
 	/* Get the destination register number into r5 */
 	lbui	r5, r0, TOPHYS(ex_reg_op);
@@ -502,25 +504,25 @@ ex_sw_tail:
 	andi	r6, r6, 0x800; /* Extract ESR[W] */
 	beqi	r6, ex_shw;
 	/* Get the word - delay slot */
-	swi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
+	swi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
 	/* Store the word, byte-by-byte into destination address */
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_0);
-	sbi	r3, r4, 0;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_1);
-	sbi	r3, r4, 1;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_2);
-	sbi	r3, r4, 2;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_3);
-	sbi	r3, r4, 3;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_0);
+	sbi	r4, r3, 0;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_1);
+	sbi	r4, r3, 1;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_2);
+	sbi	r4, r3, 2;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_3);
+	sbi	r4, r3, 3;
 	bri	ex_handler_done;
 
 ex_shw:
 	/* Store the lower half-word, byte-by-byte into destination address */
-	swi	r3, r0, TOPHYS(ex_tmp_data_loc_0);
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_2);
-	sbi	r3, r4, 0;
-	lbui	r3, r0, TOPHYS(ex_tmp_data_loc_3);
-	sbi	r3, r4, 1;
+	swi	r4, r0, TOPHYS(ex_tmp_data_loc_0);
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_2);
+	sbi	r4, r3, 0;
+	lbui	r4, r0, TOPHYS(ex_tmp_data_loc_3);
+	sbi	r4, r3, 1;
 ex_sw_end: /* Exception handling of store word, ends. */
 
 ex_handler_done:
@@ -560,21 +562,16 @@ ex_handler_done:
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables.
 		 */
-		ori	r4, r0, CONFIG_KERNEL_START
-		cmpu	r4, r3, r4
-		bgti	r4, ex3
+		ori	r5, r0, CONFIG_KERNEL_START
+		cmpu	r5, r3, r5
+		bgti	r5, ex3
 		/* First, check if it was a zone fault (which means a user
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		mfs	r4, resr
-		nop
 		andi	r4, r4, 0x800		/* ESR_Z - zone protection */
 		bnei	r4, ex2
 
@@ -589,8 +586,6 @@ ex_handler_done:
 		 * tried to access a kernel or read-protected page - always
 		 * a SEGV). All other faults here must be stores, so no
 		 * need to check ESR_S as well. */
-		mfs	r4, resr
-		nop
 		andi	r4, r4, 0x800		/* ESR_Z */
 		bnei	r4, ex2
 		/* get current task address */
@@ -665,8 +660,6 @@ ex_handler_done:
 		 * R3 = ESR
 		 */
 
-		mfs	r3, rear		/* Get faulting address */
-		nop
 		RESTORE_STATE;
 		bri	page_fault_instr_trap
 
@@ -677,18 +670,15 @@ ex_handler_done:
 	 */
 	handle_data_tlb_miss_exception:
 		/* Working registers already saved: R3, R4, R5, R6
-		 * R3 = ESR
+		 * R3 = EAR, R4 = ESR
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables. */
-		ori	r4, r0, CONFIG_KERNEL_START
-		cmpu	r4, r3, r4
+		ori	r6, r0, CONFIG_KERNEL_START
+		cmpu	r4, r3, r6
 		bgti	r4, ex5
 		ori	r4, r0, swapper_pg_dir
 		mts	rpid, r0		/* TLB will have 0 TID */
@@ -731,9 +721,8 @@ ex_handler_done:
 		 * Many of these bits are software only. Bits we don't set
 		 * here we (properly should) assume have the appropriate value.
 		 */
+		brid	finish_tlb_load
 		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
-
-		bri	finish_tlb_load
 	ex7:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -754,9 +743,6 @@ ex_handler_done:
 		 */
 		mfs	r11, rpid
 		nop
-		bri	4
-		mfs	r3, rear		/* Get faulting address */
-		nop
 
 		/* If we are faulting a kernel address, we have to use the
 		 * kernel page tables.
@@ -792,7 +778,7 @@ ex_handler_done:
 		lwi	r4, r5, 0		/* Get Linux PTE */
 
 		andi	r6, r4, _PAGE_PRESENT
-		beqi	r6, ex7
+		beqi	r6, ex10
 
 		ori	r4, r4, _PAGE_ACCESSED
 		swi	r4, r5, 0
@@ -805,9 +791,8 @@ ex_handler_done:
 		 * Many of these bits are software only. Bits we don't set
 		 * here we (properly should) assume have the appropriate value.
 		 */
+		brid	finish_tlb_load
 		andni	r4, r4, 0x0ce2		/* Make sure 20, 21 are zero */
-
-		bri	finish_tlb_load
 	ex10:
 		/* The bailout. Restore registers to pre-exception conditions
 		 * and call the heavyweights to help us out.
@@ -837,9 +822,9 @@ ex_handler_done:
 		andi	r5, r5, (MICROBLAZE_TLB_SIZE-1)
 		ori	r6, r0, 1
 		cmp	r31, r5, r6
-		blti	r31, sem
+		blti	r31, ex12
 		addik	r5, r6, 1
-	sem:
+	ex12:
 		/* MS: save back current TLB index */
 		swi	r5, r0, TOPHYS(tlb_index)
 
@@ -859,7 +844,6 @@ ex_handler_done:
 		nop
 
 		/* Done...restore registers and get out of here. */
-	ex12:
 		mts	rpid, r11
 		nop
 		bri 4
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 0f06034..8f120ac 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/hardirq.h>
 #include <linux/interrupt.h>
@@ -32,7 +33,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
 static u32 concurrent_irq;
 
-void do_IRQ(struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	unsigned int irq;
 	struct pt_regs *old_regs = set_irq_regs(regs);
@@ -93,3 +94,18 @@ skip:
 	}
 	return 0;
 }
+
+/* MS: There is no any advance mapping mechanism. We are using simple 32bit
+  intc without any cascades or any connection that's why mapping is 1:1 */
+unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
+{
+	return hwirq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+unsigned int irq_create_of_mapping(struct device_node *controller,
+					u32 *intspec, unsigned int intsize)
+{
+	return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c
index bc4dcb7..ff85f77 100644
--- a/arch/microblaze/kernel/microblaze_ksyms.c
+++ b/arch/microblaze/kernel/microblaze_ksyms.c
@@ -52,3 +52,14 @@ EXPORT_SYMBOL_GPL(_ebss);
 extern void _mcount(void);
 EXPORT_SYMBOL(_mcount);
 #endif
+
+/*
+ * Assembly functions that may be used (directly or indirectly) by modules
+ */
+EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__strncpy_user);
+
+#ifdef CONFIG_OPT_LIB_ASM
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+#endif
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
index df16c62..0fb5fc6 100644
--- a/arch/microblaze/kernel/misc.S
+++ b/arch/microblaze/kernel/misc.S
@@ -26,9 +26,10 @@
  * We avoid flushing the pinned 0, 1 and possibly 2 entries.
  */
 .globl _tlbia;
+.type  _tlbia, @function
 .align 4;
 _tlbia:
-	addik	r12, r0, 63 /* flush all entries (63 - 3) */
+	addik	r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */
 	/* isync */
 _tlbia_1:
 	mts	rtlbx, r12
@@ -41,11 +42,13 @@ _tlbia_1:
 	/* sync */
 	rtsd	r15, 8
 	nop
+	.size  _tlbia, . - _tlbia
 
 /*
  * Flush MMU TLB for a particular address (in r5)
  */
 .globl _tlbie;
+.type  _tlbie, @function
 .align 4;
 _tlbie:
 	mts	rtlbsx, r5 /* look up the address in TLB */
@@ -59,17 +62,20 @@ _tlbie_1:
 	rtsd	r15, 8
 	nop
 
+	.size  _tlbie, . - _tlbie
+
 /*
  * Allocate TLB entry for early console
  */
 .globl early_console_reg_tlb_alloc;
+.type  early_console_reg_tlb_alloc, @function
 .align 4;
 early_console_reg_tlb_alloc:
 	/*
 	 * Load a TLB entry for the UART, so that microblaze_progress() can use
 	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
 	 */
-	ori	r4, r0, 63
+	ori	r4, r0, MICROBLAZE_TLB_SIZE - 1
 	mts	rtlbx, r4 /* TLB slot 2 */
 
 	or	r4,r5,r0
@@ -86,35 +92,4 @@ early_console_reg_tlb_alloc:
 	rtsd	r15, 8
 	nop
 
-/*
- * Copy a whole page (4096 bytes).
- */
-#define COPY_16_BYTES		\
-	lwi	r7, r6, 0;	\
-	lwi	r8, r6, 4;	\
-	lwi	r9, r6, 8;	\
-	lwi	r10, r6, 12;	\
-	swi	r7, r5, 0;	\
-	swi	r8, r5, 4;	\
-	swi	r9, r5, 8;	\
-	swi	r10, r5, 12
-
-
-/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
-#define DCACHE_LINE_BYTES (4 * 4)
-
-.globl copy_page;
-.align 4;
-copy_page:
-	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
-_copy_page_loop:
-	COPY_16_BYTES
-#if DCACHE_LINE_BYTES >= 32
-	COPY_16_BYTES
-#endif
-	addik	r6, r6, DCACHE_LINE_BYTES
-	addik	r5, r5, DCACHE_LINE_BYTES
-	bneid	r11, _copy_page_loop
-	addik	r11, r11, -1
-	rtsd	r15, 8
-	nop
+	.size  early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 5a45b1a..0e73f66 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -12,11 +12,11 @@
 #include <linux/kernel.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
-#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 
 #include <asm/pgtable.h>
+#include <asm/cacheflush.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -152,6 +152,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		struct module *module)
 {
+	flush_dcache();
 	return 0;
 }
 
diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
index 9a0f7632..b372787 100644
--- a/arch/microblaze/kernel/of_device.c
+++ b/arch/microblaze/kernel/of_device.c
@@ -12,7 +12,7 @@
 void of_device_make_bus_id(struct of_device *dev)
 {
 	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->node;
+	struct device_node *node = dev->dev.of_node;
 	const u32 *reg;
 	u64 addr;
 	int magic;
@@ -49,11 +49,10 @@ struct of_device *of_device_alloc(struct device_node *np,
 	if (!dev)
 		return NULL;
 
-	dev->node = of_node_get(np);
-	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dev.of_node = of_node_get(np);
+	dev->dev.dma_mask = &dev->archdata.dma_mask;
 	dev->dev.parent = parent;
 	dev->dev.release = of_release_dev;
-	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
 		dev_set_name(&dev->dev, bus_id);
@@ -75,17 +74,17 @@ int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 	ofdev = to_of_device(dev);
 
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
 		return -ENOMEM;
 
 	/* Since the compatible field can contain pretty much anything
 	 * it's not really legal to split it out with commas. We split it
 	 * up using a number of environment variables instead. */
 
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
 	while (compat && *compat && cplen > 0) {
 		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
 			return -ENOMEM;
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
index acf4574..ccf6f42 100644
--- a/arch/microblaze/kernel/of_platform.c
+++ b/arch/microblaze/kernel/of_platform.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
-#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -48,7 +47,7 @@ struct of_device *of_platform_device_create(struct device_node *np,
 	if (!dev)
 		return NULL;
 
-	dev->dma_mask = 0xffffffffUL;
+	dev->archdata.dma_mask = 0xffffffffUL;
 	dev->dev.bus = &of_platform_bus_type;
 
 	/* We do not fill the DMA ops for platform devices by default.
@@ -167,7 +166,7 @@ EXPORT_SYMBOL(of_platform_bus_probe);
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 struct of_device *of_find_device_by_node(struct device_node *np)
@@ -185,7 +184,7 @@ EXPORT_SYMBOL(of_find_device_by_node);
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->linux_phandle == *ph;
+	return to_of_device(dev)->dev.of_node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 812f1bf..09bed44 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <asm/system.h>
 #include <asm/pgalloc.h>
+#include <asm/uaccess.h> /* for USER_DS macros */
 #include <asm/cacheflush.h>
 
 void show_regs(struct pt_regs *regs)
@@ -74,7 +75,10 @@ __setup("hlt", hlt_setup);
 
 void default_idle(void)
 {
-	if (!hlt_counter) {
+	if (likely(hlt_counter)) {
+		while (!need_resched())
+			cpu_relax();
+	} else {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
 		smp_mb__after_clear_bit();
 		local_irq_disable();
@@ -82,9 +86,7 @@ void default_idle(void)
 			cpu_sleep();
 		local_irq_enable();
 		set_thread_flag(TIF_POLLING_NRFLAG);
-	} else
-		while (!need_resched())
-			cpu_relax();
+	}
 }
 
 void cpu_idle(void)
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index b817df1..427b13b 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -29,7 +29,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -42,698 +42,21 @@
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
-typedef u32 cell_t;
-
-static struct boot_param_header *initial_boot_params;
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
-{
-	return ((char *)initial_boot_params) +
-		initial_boot_params->off_dt_strings + offset;
-}
-
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
-				     const char *uname, int depth,
-				     void *data),
-			   void *data)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	int rc = 0;
-	int depth = -1;
-
-	do {
-		u32 tag = *((u32 *)p);
-		char *pathp;
-
-		p += 4;
-		if (tag == OF_DT_END_NODE) {
-			depth--;
-			continue;
-		}
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag == OF_DT_END)
-			break;
-		if (tag == OF_DT_PROP) {
-			u32 sz = *((u32 *)p);
-			p += 8;
-			if (initial_boot_params->version < 0x10)
-				p = _ALIGN(p, sz >= 8 ? 8 : 4);
-			p += sz;
-			p = _ALIGN(p, 4);
-			continue;
-		}
-		if (tag != OF_DT_BEGIN_NODE) {
-			printk(KERN_WARNING "Invalid tag %x scanning flattened"
-				" device tree !\n", tag);
-			return -EINVAL;
-		}
-		depth++;
-		pathp = (char *)p;
-		p = _ALIGN(p + strlen(pathp) + 1, 4);
-		if ((*pathp) == '/') {
-			char *lp, *np;
-			for (lp = NULL, np = pathp; *np; np++)
-				if ((*np) == '/')
-					lp = np+1;
-			if (lp != NULL)
-				pathp = lp;
-		}
-		rc = it(p, pathp, depth, data);
-		if (rc != 0)
-			break;
-	} while (1);
-
-	return rc;
-}
-
-unsigned long __init of_get_flat_dt_root(void)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-
-	while (*((u32 *)p) == OF_DT_NOP)
-		p += 4;
-	BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
-	p += 4;
-	return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
-/**
- * This function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
-				unsigned long *size)
-{
-	unsigned long p = node;
-
-	do {
-		u32 tag = *((u32 *)p);
-		u32 sz, noff;
-		const char *nstr;
-
-		p += 4;
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag != OF_DT_PROP)
-			return NULL;
-
-		sz = *((u32 *)p);
-		noff = *((u32 *)(p + 4));
-		p += 8;
-		if (initial_boot_params->version < 0x10)
-			p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
-		nstr = find_flat_dt_string(noff);
-		if (nstr == NULL) {
-			printk(KERN_WARNING "Can't find property index"
-				" name !\n");
-			return NULL;
-		}
-		if (strcmp(name, nstr) == 0) {
-			if (size)
-				*size = sz;
-			return (void *)p;
-		}
-		p += sz;
-		p = _ALIGN(p, 4);
-	} while (1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
-	const char *cp;
-	unsigned long cplen, l;
-
-	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
-					unsigned long align)
-{
-	void *res;
-
-	*mem = _ALIGN(*mem, align);
-	res = (void *)*mem;
-	*mem += size;
-
-	return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
-					unsigned long *p,
-					struct device_node *dad,
-					struct device_node ***allnextpp,
-					unsigned long fpsize)
-{
-	struct device_node *np;
-	struct property *pp, **prev_pp = NULL;
-	char *pathp;
-	u32 tag;
-	unsigned int l, allocl;
-	int has_name = 0;
-	int new_format = 0;
-
-	tag = *((u32 *)(*p));
-	if (tag != OF_DT_BEGIN_NODE) {
-		printk("Weird tag at start of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	pathp = (char *)*p;
-	l = allocl = strlen(pathp) + 1;
-	*p = _ALIGN(*p + l, 4);
-
-	/* version 0x10 has a more compact unit name here instead of the full
-	 * path. we accumulate the full path size using "fpsize", we'll rebuild
-	 * it later. We detect this because the first character of the name is
-	 * not '/'.
-	 */
-	if ((*pathp) != '/') {
-		new_format = 1;
-		if (fpsize == 0) {
-			/* root node: special case. fpsize accounts for path
-			 * plus terminating zero. root node only has '/', so
-			 * fpsize should be 2, but we want to avoid the first
-			 * level nodes to have two '/' so we use fpsize 1 here
-			 */
-			fpsize = 1;
-			allocl = 2;
-		} else {
-			/* account for '/' and path size minus terminal 0
-			 * already in 'l'
-			 */
-			fpsize += l;
-			allocl = fpsize;
-		}
-	}
-
-	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
-				__alignof__(struct device_node));
-	if (allnextpp) {
-		memset(np, 0, sizeof(*np));
-		np->full_name = ((char *)np) + sizeof(struct device_node);
-		if (new_format) {
-			char *p2 = np->full_name;
-			/* rebuild full path for new format */
-			if (dad && dad->parent) {
-				strcpy(p2, dad->full_name);
-#ifdef DEBUG
-				if ((strlen(p2) + l + 1) != allocl) {
-					pr_debug("%s: p: %d, l: %d, a: %d\n",
-						pathp, (int)strlen(p2),
-						l, allocl);
-				}
-#endif
-				p2 += strlen(p2);
-			}
-			*(p2++) = '/';
-			memcpy(p2, pathp, l);
-		} else
-			memcpy(np->full_name, pathp, l);
-		prev_pp = &np->properties;
-		**allnextpp = np;
-		*allnextpp = &np->allnext;
-		if (dad != NULL) {
-			np->parent = dad;
-			/* we temporarily use the next field as `last_child'*/
-			if (dad->next == NULL)
-				dad->child = np;
-			else
-				dad->next->sibling = np;
-			dad->next = np;
-		}
-		kref_init(&np->kref);
-	}
-	while (1) {
-		u32 sz, noff;
-		char *pname;
-
-		tag = *((u32 *)(*p));
-		if (tag == OF_DT_NOP) {
-			*p += 4;
-			continue;
-		}
-		if (tag != OF_DT_PROP)
-			break;
-		*p += 4;
-		sz = *((u32 *)(*p));
-		noff = *((u32 *)((*p) + 4));
-		*p += 8;
-		if (initial_boot_params->version < 0x10)
-			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
-		pname = find_flat_dt_string(noff);
-		if (pname == NULL) {
-			printk(KERN_INFO
-				"Can't find property name in list !\n");
-			break;
-		}
-		if (strcmp(pname, "name") == 0)
-			has_name = 1;
-		l = strlen(pname) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
-					__alignof__(struct property));
-		if (allnextpp) {
-			if (strcmp(pname, "linux,phandle") == 0) {
-				np->node = *((u32 *)*p);
-				if (np->linux_phandle == 0)
-					np->linux_phandle = np->node;
-			}
-			if (strcmp(pname, "ibm,phandle") == 0)
-				np->linux_phandle = *((u32 *)*p);
-			pp->name = pname;
-			pp->length = sz;
-			pp->value = (void *)*p;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-		}
-		*p = _ALIGN((*p) + sz, 4);
-	}
-	/* with version 0x10 we may not have the name property, recreate
-	 * it here from the unit name if absent
-	 */
-	if (!has_name) {
-		char *p1 = pathp, *ps = pathp, *pa = NULL;
-		int sz;
-
-		while (*p1) {
-			if ((*p1) == '@')
-				pa = p1;
-			if ((*p1) == '/')
-				ps = p1 + 1;
-			p1++;
-		}
-		if (pa < ps)
-			pa = p1;
-		sz = (pa - ps) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
-					__alignof__(struct property));
-		if (allnextpp) {
-			pp->name = "name";
-			pp->length = sz;
-			pp->value = pp + 1;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-			memcpy(pp->value, ps, sz - 1);
-			((char *)pp->value)[sz - 1] = 0;
-			pr_debug("fixed up name for %s -> %s\n", pathp,
-				(char *)pp->value);
-		}
-	}
-	if (allnextpp) {
-		*prev_pp = NULL;
-		np->name = of_get_property(np, "name", NULL);
-		np->type = of_get_property(np, "device_type", NULL);
-
-		if (!np->name)
-			np->name = "<NULL>";
-		if (!np->type)
-			np->type = "<NULL>";
-	}
-	while (tag == OF_DT_BEGIN_NODE) {
-		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
-		tag = *((u32 *)(*p));
-	}
-	if (tag != OF_DT_END_NODE) {
-		printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	return mem;
-}
-
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
-	unsigned long start, mem, size;
-	struct device_node **allnextp = &allnodes;
-
-	pr_debug(" -> unflatten_device_tree()\n");
-
-	/* First pass, scan for size */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	size = unflatten_dt_node(0, &start, NULL, NULL, 0);
-	size = (size | 3) + 1;
-
-	pr_debug("  size is %lx, allocating...\n", size);
-
-	/* Allocate memory for the expanded device tree */
-	mem = lmb_alloc(size + 4, __alignof__(struct device_node));
-	mem = (unsigned long) __va(mem);
-
-	((u32 *)mem)[size / 4] = 0xdeadbeef;
-
-	pr_debug("  unflattening %lx...\n", mem);
-
-	/* Second pass, do actual unflattening */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
-	if (*((u32 *)start) != OF_DT_END)
-		printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
-			*((u32 *)start));
-	if (((u32 *)mem)[size / 4] != 0xdeadbeef)
-		printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
-			((u32 *)mem)[size / 4]);
-	*allnextp = NULL;
-
-	/* Get pointer to OF "/chosen" node for use everywhere */
-	of_chosen = of_find_node_by_path("/chosen");
-	if (of_chosen == NULL)
-		of_chosen = of_find_node_by_path("/chosen@0");
-
-	pr_debug(" <- unflatten_device_tree()\n");
-}
-
-#define early_init_dt_scan_drconf_memory(node) 0
-
-static int __init early_init_dt_scan_cpus(unsigned long node,
-					  const char *uname, int depth,
-					  void *data)
-{
-	static int logical_cpuid;
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const u32 *intserv;
-	int i, nthreads;
-	int found = 0;
-
-	/* We are scanning "cpu" nodes only */
-	if (type == NULL || strcmp(type, "cpu") != 0)
-		return 0;
-
-	/* Get physical cpuid */
-	intserv = of_get_flat_dt_prop(node, "reg", NULL);
-	nthreads = 1;
-
-	/*
-	 * Now see if any of these threads match our boot cpu.
-	 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
-	 */
-	for (i = 0; i < nthreads; i++) {
-		/*
-		 * version 2 of the kexec param format adds the phys cpuid of
-		 * booted proc.
-		 */
-		if (initial_boot_params && initial_boot_params->version >= 2) {
-			if (intserv[i] ==
-					initial_boot_params->boot_cpuid_phys) {
-				found = 1;
-				break;
-			}
-		} else {
-			/*
-			 * Check if it's the boot-cpu, set it's hw index now,
-			 * unfortunately this format did not support booting
-			 * off secondary threads.
-			 */
-			if (of_get_flat_dt_prop(node,
-					"linux,boot-cpu", NULL) != NULL) {
-				found = 1;
-				break;
-			}
-		}
-
-#ifdef CONFIG_SMP
-		/* logical cpu id is always 0 on UP kernels */
-		logical_cpuid++;
-#endif
-	}
-
-	if (found) {
-		pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
-			intserv[i]);
-		boot_cpuid = logical_cpuid;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
-	unsigned long l;
-	u32 *prop;
-
-	pr_debug("Looking for initrd properties... ");
-
-	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
-	if (prop) {
-		initrd_start = (unsigned long)
-					__va((u32)of_read_ulong(prop, l/4));
-
-		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
-		if (prop) {
-			initrd_end = (unsigned long)
-					__va((u32)of_read_ulong(prop, 1/4));
-			initrd_below_start_ok = 1;
-		} else {
-			initrd_start = 0;
-		}
-	}
-
-	pr_debug("initrd_start=0x%lx  initrd_end=0x%lx\n",
-					initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	unsigned long l;
-	char *p;
-
-	pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
-	if (depth != 1 ||
-		(strcmp(uname, "chosen") != 0 &&
-				strcmp(uname, "chosen@0") != 0))
-		return 0;
-
-#ifdef CONFIG_KEXEC
-	lprop = (u64 *)of_get_flat_dt_prop(node,
-				"linux,crashkernel-base", NULL);
-	if (lprop)
-		crashk_res.start = *lprop;
-
-	lprop = (u64 *)of_get_flat_dt_prop(node,
-				"linux,crashkernel-size", NULL);
-	if (lprop)
-		crashk_res.end = crashk_res.start + *lprop - 1;
-#endif
-
-	early_init_dt_check_for_initrd(node);
-
-	/* Retreive command line */
-	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
-		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
-#ifndef CONFIG_CMDLINE_FORCE
-	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
-#endif
-		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", cmd_line);
-
-	/* break now */
-	return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	u32 *prop;
-
-	if (depth != 0)
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
-	dt_root_size_cells = (prop == NULL) ? 1 : *prop;
-	pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
-
-	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
-	dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
-	pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-
-	/* break now */
-	return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
-	cell_t *p = *cellp;
-
-	*cellp = p + s;
-	return of_read_number(p, s);
+	/* No Microblaze specific code here */
 }
 
-static int __init early_init_dt_scan_memory(unsigned long node,
-				const char *uname, int depth, void *data)
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	cell_t *reg, *endp;
-	unsigned long l;
-
-	/* Look for the ibm,dynamic-reconfiguration-memory node */
-/*	if (depth == 1 &&
-		strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
-		return early_init_dt_scan_drconf_memory(node);
-*/
-	/* We are scanning "memory" nodes only */
-	if (type == NULL) {
-		/*
-		 * The longtrail doesn't have a device_type on the
-		 * /memory node, so look for the node called /memory@0.
-		 */
-		if (depth != 1 || strcmp(uname, "memory@0") != 0)
-			return 0;
-	} else if (strcmp(type, "memory") != 0)
-		return 0;
-
-	reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(cell_t));
-
-	pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
-		uname, l, reg[0], reg[1], reg[2], reg[3]);
-
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
-
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
-
-		if (size == 0)
-			continue;
-		pr_debug(" - %llx ,  %llx\n", (unsigned long long)base,
-			(unsigned long long)size);
-
-		lmb_add(base, size);
-	}
-	return 0;
+	memblock_add(base, size);
 }
 
-#ifdef CONFIG_PHYP_DUMP
-/**
- * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
- *
- * Function to find the largest size we need to reserve
- * during early boot process.
- *
- * It either looks for boot param and returns that OR
- * returns larger of 256 or 5% rounded down to multiples of 256MB.
- *
- */
-static inline unsigned long phyp_dump_calculate_reserve_size(void)
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	unsigned long tmp;
-
-	if (phyp_dump_info->reserve_bootvar)
-		return phyp_dump_info->reserve_bootvar;
-
-	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
-	do_div(tmp, 20);
-
-	/* round it down in multiples of 256 */
-	tmp = tmp & ~0x0FFFFFFFUL;
-
-	return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+	return memblock_alloc(size, align);
 }
 
-/**
- * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
- *
- * This routine may reserve memory regions in the kernel only
- * if the system is supported and a dump was taken in last
- * boot instance or if the hardware is supported and the
- * scratch area needs to be setup. In other instances it returns
- * without reserving anything. The memory in case of dump being
- * active is freed when the dump is collected (by userland tools).
- */
-static void __init phyp_dump_reserve_mem(void)
-{
-	unsigned long base, size;
-	unsigned long variable_reserve_size;
-
-	if (!phyp_dump_info->phyp_dump_configured) {
-		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
-		return;
-	}
-
-	if (!phyp_dump_info->phyp_dump_at_boot) {
-		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
-		return;
-	}
-
-	variable_reserve_size = phyp_dump_calculate_reserve_size();
-
-	if (phyp_dump_info->phyp_dump_is_active) {
-		/* Reserve *everything* above RMR.Area freed by userland tools*/
-		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
-
-		/* XXX crashed_ram_end is wrong, since it may be beyond
-		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
-
-		phyp_dump_info->init_reserve_start = base;
-		phyp_dump_info->init_reserve_size = size;
-	} else {
-		size = phyp_dump_info->cpu_state_size +
-			phyp_dump_info->hpte_region_size +
-			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
-		phyp_dump_info->init_reserve_start = base;
-		phyp_dump_info->init_reserve_size = size;
-	}
-}
-#else
-static inline void __init phyp_dump_reserve_mem(void) {}
-#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
-
 #ifdef CONFIG_EARLY_PRINTK
 /* MS this is Microblaze specifig function */
 static int __init early_init_dt_scan_serial(unsigned long node,
@@ -775,19 +98,14 @@ void __init early_init_devtree(void *params)
 	/* Setup flat device-tree pointer */
 	initial_boot_params = params;
 
-#ifdef CONFIG_PHYP_DUMP
-	/* scan tree to see if dump occured during last boot */
-	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
-#endif
-
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -795,37 +113,22 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	lmb_analyze();
+	memblock_analyze();
 
-	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
-
-	pr_debug("Scanning CPUs ...\n");
-
-	/* Retreive CPU related informations from the flat tree
-	 * (altivec support, boot CPU ID, ...)
-	 */
-	of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
 	pr_debug(" <- early_init_devtree()\n");
 }
 
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+		unsigned long end)
 {
-	struct device_node *root;
-	int rc = 0;
-
-	root = of_find_node_by_path("/");
-	if (root) {
-		rc = of_device_is_compatible(root, compat);
-		of_node_put(root);
-	}
-	return rc;
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
 }
-EXPORT_SYMBOL(machine_is_compatible);
+#endif
 
 /*******
  *
@@ -838,273 +141,6 @@ EXPORT_SYMBOL(machine_is_compatible);
  *
  *******/
 
-/**
- *	of_find_node_by_phandle - Find a node given a phandle
- *	@handle:	phandle of the node to find
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	for (np = allnodes; np != NULL; np = np->allnext)
-		if (np->linux_phandle == handle)
-			break;
-	of_node_get(np);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	if (node)
-		kref_get(&node->kref);
-	return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node *kref_to_device_node(struct kref *kref)
-{
-	return container_of(kref, struct device_node, kref);
-}
-
-/**
- *	of_node_release - release a dynamically allocated node
- *	@kref:  kref element of the node to be released
- *
- *	In of_node_put() this function is passed to kref_put()
- *	as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
-	struct device_node *node = kref_to_device_node(kref);
-	struct property *prop = node->properties;
-
-	/* We should never be releasing nodes that haven't been detached. */
-	if (!of_node_check_flag(node, OF_DETACHED)) {
-		printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
-			node->full_name);
-		dump_stack();
-		kref_init(&node->kref);
-		return;
-	}
-
-	if (!of_node_check_flag(node, OF_DYNAMIC))
-		return;
-
-	while (prop) {
-		struct property *next = prop->next;
-		kfree(prop->name);
-		kfree(prop->value);
-		kfree(prop);
-		prop = next;
-
-		if (!prop) {
-			prop = node->deadprops;
-			node->deadprops = NULL;
-		}
-	}
-	kfree(node->full_name);
-	kfree(node->data);
-	kfree(node);
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
-	if (node)
-		kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	np->sibling = np->parent->child;
-	np->allnext = allnodes;
-	np->parent->child = np;
-	allnodes = np;
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree.  The caller must hold
- * a reference to the node.  The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
-	struct device_node *parent;
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-
-	parent = np->parent;
-	if (!parent)
-		goto out_unlock;
-
-	if (allnodes == np)
-		allnodes = np->allnext;
-	else {
-		struct device_node *prev;
-		for (prev = allnodes;
-		     prev->allnext != np;
-		     prev = prev->allnext)
-			;
-		prev->allnext = np->allnext;
-	}
-
-	if (parent->child == np)
-		parent->child = np->sibling;
-	else {
-		struct device_node *prevsib;
-		for (prevsib = np->parent->child;
-		     prevsib->sibling != np;
-		     prevsib = prevsib->sibling)
-			;
-		prevsib->sibling = np->sibling;
-	}
-
-	of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-
-	prop->next = NULL;
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (strcmp(prop->name, (*next)->name) == 0) {
-			/* duplicate ! don't insert it */
-			write_unlock_irqrestore(&devtree_lock, flags);
-			return -1;
-		}
-		next = &(*next)->next;
-	}
-	*next = prop;
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Remove a property from a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == prop) {
-			/* found the node */
-			*next = prop->next;
-			prop->next = np->deadprops;
-			np->deadprops = prop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to remove the proc node as well */
-	if (np->pde)
-		proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Update a property in a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
-			 struct property *newprop,
-			 struct property *oldprop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == oldprop) {
-			/* found the node */
-			newprop->next = oldprop->next;
-			*next = newprop;
-			oldprop->next = np->deadprops;
-			np->deadprops = oldprop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
 #if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
 static struct debugfs_blob_wrapper flat_dt_blob;
 
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 4b3ac32..a4a7770 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -75,29 +75,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int rval;
 	unsigned long val = 0;
-	unsigned long copied;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr);
-		copied = access_process_vm(child, addr, &val, sizeof(val), 0);
-		rval = -EIO;
-		if (copied != sizeof(val))
-			break;
-		rval = put_user(val, (unsigned long *)data);
-		break;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		pr_debug("POKETEXT/POKEDATA to %08lX\n", addr);
-		rval = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-		    == sizeof(data))
-			break;
-		rval = -EIO;
-		break;
-
 	/* Read/write the word at location ADDR in the registers. */
 	case PTRACE_PEEKUSR:
 	case PTRACE_POKEUSR:
@@ -130,50 +109,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		if (rval == 0 && request == PTRACE_PEEKUSR)
 			rval = put_user(val, (unsigned long *)data);
 		break;
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-		pr_debug("PTRACE_SYSCALL\n");
-	case PTRACE_SINGLESTEP:
-		pr_debug("PTRACE_SINGLESTEP\n");
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-		pr_debug("PTRACE_CONT\n");
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		pr_debug("wakeup_process\n");
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		pr_debug("PTRACE_KILL\n");
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		pr_debug("PTRACE_DETACH\n");
-		rval = ptrace_detach(child, data);
-		break;
 	default:
-		/* rval = ptrace_request(child, request, addr, data); noMMU */
-		rval = -EIO;
+		rval = ptrace_request(child, request, addr, data);
 	}
 	return rval;
 }
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 5372b24..17c98db 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -22,7 +22,10 @@
 #include <linux/io.h>
 #include <linux/bug.h>
 #include <linux/param.h>
+#include <linux/pci.h>
 #include <linux/cache.h>
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/entry.h>
 #include <asm/cpuinfo.h>
@@ -54,13 +57,10 @@ void __init setup_arch(char **cmdline_p)
 
 	microblaze_cache_init();
 
-	enable_dcache();
-
-	invalidate_icache();
-	enable_icache();
-
 	setup_memory();
 
+	xilinx_pci_init();
+
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
 	printk(KERN_NOTICE "Self modified code enable\n");
 #endif
@@ -92,6 +92,12 @@ inline unsigned get_romfs_len(unsigned *addr)
 }
 #endif	/* CONFIG_MTD_UCLINUX_EBSS */
 
+#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
+#define eprintk early_printk
+#else
+#define eprintk printk
+#endif
+
 void __init machine_early_init(const char *cmdline, unsigned int ram,
 		unsigned int fdt, unsigned int msr)
 {
@@ -139,32 +145,32 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	early_printk("Ramdisk addr 0x%08x, ", ram);
+	eprintk("Ramdisk addr 0x%08x, ", ram);
 	if (fdt)
-		early_printk("FDT at 0x%08x\n", fdt);
+		eprintk("FDT at 0x%08x\n", fdt);
 	else
-		early_printk("Compiled-in FDT at 0x%08x\n",
+		eprintk("Compiled-in FDT at 0x%08x\n",
 					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
-	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+	eprintk("Found romfs @ 0x%08x (0x%08x)\n",
 			romfs_base, romfs_size);
-	early_printk("#### klimit %p ####\n", old_klimit);
+	eprintk("#### klimit %p ####\n", old_klimit);
 	BUG_ON(romfs_size < 0); /* What else can we do? */
 
-	early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+	eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
 			romfs_size, romfs_base, (unsigned)&_ebss);
 
-	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
+	eprintk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
-		early_printk("!!!Your kernel has setup MSR instruction but "
+		eprintk("!!!Your kernel has setup MSR instruction but "
 				"CPU don't have it %d\n", msr);
 #else
 	if (!msr)
-		early_printk("!!!Your kernel not setup MSR instruction but "
+		eprintk("!!!Your kernel not setup MSR instruction but "
 				"CPU have it %d\n", msr);
 #endif
 
@@ -187,3 +193,37 @@ static int microblaze_debugfs_init(void)
 }
 arch_initcall(microblaze_debugfs_init);
 #endif
+
+static int dflt_bus_notify(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct device *dev = data;
+
+	/* We are only intereted in device addition */
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return 0;
+
+	set_dma_ops(dev, &dma_direct_ops);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block dflt_plat_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static struct notifier_block dflt_of_bus_notifier = {
+	.notifier_call = dflt_bus_notify,
+	.priority = INT_MAX,
+};
+
+static int __init setup_bus_notifier(void)
+{
+	bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier);
+	bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier);
+
+	return 0;
+}
+
+arch_initcall(setup_bus_notifier);
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 9f3c205..f4e00b7 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -30,6 +30,7 @@
 #include <linux/semaphore.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
+#include <linux/slab.h>
 
 #include <asm/syscalls.h>
 
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index eaaaf80..75e4920 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -22,13 +22,11 @@ void trap_init(void)
 	__enable_hw_exceptions();
 }
 
-static int kstack_depth_to_print = 24;
+static unsigned long kstack_depth_to_print = 24;
 
 static int __init kstack_setup(char *s)
 {
-	kstack_depth_to_print = strict_strtoul(s, 0, NULL);
-
-	return 1;
+	return !strict_strtoul(s, 0, &kstack_depth_to_print);
 }
 __setup("kstack=", kstack_setup);
 
@@ -97,37 +95,3 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data)
-{
-	if (data)
-		printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
-			file, line, data);
-	else
-		printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
-
-	machine_halt();
-}
-
-int bad_trap(int trap_num, struct pt_regs *regs)
-{
-	printk(KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-int debug_trap(struct pt_regs *regs)
-{
-	int i;
-	printk(KERN_CRIT "debug trap\n");
-	for (i = 0; i < 32; i++) {
-		/* printk("r%i:%08X\t",i,regs->gpr[i]); */
-		if ((i % 4) == 3)
-			printk(KERN_CRIT "\n");
-	}
-	printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
-	return -ENOSYS;
-}
-#endif
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 5ef619a..db72d71 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -24,7 +24,8 @@ SECTIONS {
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
-		*(.text .text.*)
+		HEAD_TEXT
+		TEXT_TEXT
 		*(.fixup)
 		EXIT_TEXT
 		EXIT_CALL
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index b579db0..4dfe47d 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -10,5 +10,4 @@ else
 lib-y += memcpy.o memmove.o
 endif
 
-lib-$(CONFIG_NO_MMU) += uaccess.o
-lib-$(CONFIG_MMU) += uaccess_old.o
+lib-y += uaccess_old.o
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
index 02e3ab4..fdc48bb 100644
--- a/arch/microblaze/lib/fastcopy.S
+++ b/arch/microblaze/lib/fastcopy.S
@@ -30,8 +30,9 @@
  */
 
 #include <linux/linkage.h>
-
+	.text
 	.globl	memcpy
+	.type  memcpy, @function
 	.ent	memcpy
 
 memcpy:
@@ -345,9 +346,11 @@ a_done:
 	rtsd	r15, 8
 	nop
 
+.size  memcpy, . - memcpy
 .end memcpy
 /*----------------------------------------------------------------------------*/
 	.globl	memmove
+	.type  memmove, @function
 	.ent	memmove
 
 memmove:
@@ -659,4 +662,5 @@ d_done:
 	rtsd	r15, 8
 	nop
 
+.size  memmove, . - memmove
 .end memmove
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index cc2108b..014bac9 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -53,7 +53,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
 	const uint32_t *i_src;
 	uint32_t *i_dst;
 
-	if (c >= 4) {
+	if (likely(c >= 4)) {
 		unsigned  value, buf_hold;
 
 		/* Align the dstination to a word boundry. */
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 4df851d..ecfb663 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -33,22 +33,23 @@
 #ifdef __HAVE_ARCH_MEMSET
 void *memset(void *v_src, int c, __kernel_size_t n)
 {
-
 	char *src = v_src;
 #ifdef CONFIG_OPT_LIB_FUNCTION
 	uint32_t *i_src;
-	uint32_t w32;
+	uint32_t w32 = 0;
 #endif
 	/* Truncate c to 8 bits */
 	c = (c & 0xFF);
 
 #ifdef CONFIG_OPT_LIB_FUNCTION
-	/* Make a repeating word out of it */
-	w32 = c;
-	w32 |= w32 << 8;
-	w32 |= w32 << 16;
+	if (unlikely(c)) {
+		/* Make a repeating word out of it */
+		w32 = c;
+		w32 |= w32 << 8;
+		w32 |= w32 << 16;
+	}
 
-	if (n >= 4) {
+	if (likely(n >= 4)) {
 		/* Align the destination to a word boundary */
 		/* This is done in an endian independant manner */
 		switch ((unsigned) src & 3) {
diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c
deleted file mode 100644
index a853fe0..0000000
--- a/arch/microblaze/lib/uaccess.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-#include <asm/bug.h>
-
-long strnlen_user(const char __user *src, long count)
-{
-	return strlen(src) + 1;
-}
-
-#define __do_strncpy_from_user(dst, src, count, res)			\
-	do {								\
-		char *tmp;						\
-		strncpy(dst, src, count);				\
-		for (tmp = dst; *tmp && count > 0; tmp++, count--)	\
-			;						\
-		res = (tmp - dst);					\
-	} while (0)
-
-long __strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-unsigned long __copy_tofrom_user(void __user *to,
-		const void __user *from, unsigned long size)
-{
-	memcpy(to, from, size);
-	return 0;
-}
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
index 67f991c..5810cec 100644
--- a/arch/microblaze/lib/uaccess_old.S
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -22,6 +22,7 @@
 
 	.text
 .globl __strncpy_user;
+.type  __strncpy_user, @function
 .align 4;
 __strncpy_user:
 
@@ -50,7 +51,7 @@ __strncpy_user:
 3:
 	rtsd	r15,8
 	nop
-
+	.size   __strncpy_user, . - __strncpy_user
 
 	.section	.fixup, "ax"
 	.align	2
@@ -72,6 +73,7 @@ __strncpy_user:
 
 	.text
 .globl __strnlen_user;
+.type  __strnlen_user, @function
 .align 4;
 __strnlen_user:
 	addik	r3,r6,0
@@ -90,7 +92,7 @@ __strnlen_user:
 3:
 	rtsd	r15,8
 	nop
-
+	.size   __strnlen_user, . - __strnlen_user
 
 	.section	.fixup,"ax"
 4:
@@ -108,6 +110,7 @@ __strnlen_user:
  */
 	.text
 .globl __copy_tofrom_user;
+.type  __copy_tofrom_user, @function
 .align 4;
 __copy_tofrom_user:
 	/*
@@ -116,20 +119,34 @@ __copy_tofrom_user:
 	 * r7, r3 - count
 	 * r4 - tempval
 	 */
-	addik	r3,r7,0
-	beqi	r3,3f
-1:
-	lbu	r4,r6,r0
-	addik	r6,r6,1
-2:
-	sb	r4,r5,r0
-	addik	r3,r3,-1
-	bneid	r3,1b
-	addik	r5,r5,1		/* delay slot */
+	beqid	r7, 3f /* zero size is not likely */
+	andi	r3, r7, 0x3 /* filter add count */
+	bneid	r3, 4f /* if is odd value then byte copying */
+	or	r3, r5, r6 /* find if is any to/from unaligned */
+	andi	r3, r3, 0x3 /* mask unaligned */
+	bneid	r3, 1f /* it is unaligned -> then jump */
+	or	r3, r0, r0
+
+/* at least one 4 byte copy */
+5:	lw	r4, r6, r3
+6:	sw	r4, r5, r3
+	addik	r7, r7, -4
+	bneid	r7, 5b
+	addik	r3, r3, 4
+	addik	r3, r7, 0
+	rtsd	r15, 8
+	nop
+4:	or	r3, r0, r0
+1:	lbu	r4,r6,r3
+2:	sb	r4,r5,r3
+	addik	r7,r7,-1
+	bneid	r7,1b
+	addik	r3,r3,1		/* delay slot */
 3:
+	addik	r3,r7,0
 	rtsd	r15,8
 	nop
-
+	.size   __copy_tofrom_user, . - __copy_tofrom_user
 
 	.section	__ex_table,"a"
-	.word	1b,3b,2b,3b
+	.word	1b,3b,2b,3b,5b,3b,6b,3b
diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile
index 6c8a924..09c49ed 100644
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -2,6 +2,6 @@
 # Makefile
 #
 
-obj-y := init.o
+obj-y := consistent.o init.o
 
 obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
new file mode 100644
index 0000000..5a59dad
--- /dev/null
+++ b/arch/microblaze/mm/consistent.c
@@ -0,0 +1,255 @@
+/*
+ * Microblaze support for cache consistent memory.
+ * Copyright (C) 2010 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2010 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * Based on PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/gfp.h>
+
+#include <asm/pgalloc.h>
+#include <linux/io.h>
+#include <linux/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/cpuinfo.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_MMU
+/* I have to use dcache values because I can't relate on ram size */
+# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+#endif
+
+/*
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core.
+ * My crufty no-MMU approach is simple. In the HW platform we can optionally
+ * mirror the DDR up above the processor cacheable region.  So, memory accessed
+ * in this mirror region will not be cached.  It's alloced from the same
+ * pool as normal memory, but the handle we return is shifted up into the
+ * uncached region.  This will no doubt cause big problems if memory allocated
+ * here is not also freed properly. -- JW
+ */
+void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+{
+	unsigned long order, vaddr;
+	void *ret;
+	unsigned int i, err = 0;
+	struct page *page, *end;
+
+#ifdef CONFIG_MMU
+	phys_addr_t pa;
+	struct vm_struct *area;
+	unsigned long va;
+#endif
+
+	if (in_interrupt())
+		BUG();
+
+	/* Only allocate page size areas. */
+	size = PAGE_ALIGN(size);
+	order = get_order(size);
+
+	vaddr = __get_free_pages(gfp, order);
+	if (!vaddr)
+		return NULL;
+
+	/*
+	 * we need to ensure that there are no cachelines in use,
+	 * or worse dirty in this area.
+	 */
+	flush_dcache_range(virt_to_phys((void *)vaddr),
+					virt_to_phys((void *)vaddr) + size);
+
+#ifndef CONFIG_MMU
+	ret = (void *)vaddr;
+	/*
+	 * Here's the magic!  Note if the uncached shadow is not implemented,
+	 * it's up to the calling code to also test that condition and make
+	 * other arranegments, such as manually flushing the cache and so on.
+	 */
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+# endif
+	if ((unsigned int)ret > cpuinfo.dcache_base &&
+				(unsigned int)ret < cpuinfo.dcache_high)
+		printk(KERN_WARNING
+			"ERROR: Your cache coherent area is CACHED!!!\n");
+
+	/* dma_handle is same as physical (shadowed) address */
+	*dma_handle = (dma_addr_t)ret;
+#else
+	/* Allocate some common virtual space to map the new pages. */
+	area = get_vm_area(size, VM_ALLOC);
+	if (!area) {
+		free_pages(vaddr, order);
+		return NULL;
+	}
+	va = (unsigned long) area->addr;
+	ret = (void *)va;
+
+	/* This gives us the real physical address of the first page. */
+	*dma_handle = pa = virt_to_bus((void *)vaddr);
+#endif
+
+	/*
+	 * free wasted pages.  We skip the first page since we know
+	 * that it will have count = 1 and won't require freeing.
+	 * We also mark the pages in use as reserved so that
+	 * remap_page_range works.
+	 */
+	page = virt_to_page(vaddr);
+	end = page + (1 << order);
+
+	split_page(page, order);
+
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE) {
+#ifdef CONFIG_MMU
+		/* MS: This is the whole magic - use cache inhibit pages */
+		err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE);
+#endif
+
+		SetPageReserved(page);
+		page++;
+	}
+
+	/* Free the otherwise unused pages. */
+	while (page < end) {
+		__free_page(page);
+		page++;
+	}
+
+	if (err) {
+		free_pages(vaddr, order);
+		return NULL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(consistent_alloc);
+
+/*
+ * free page(s) as defined by the above mapping.
+ */
+void consistent_free(size_t size, void *vaddr)
+{
+	struct page *page;
+
+	if (in_interrupt())
+		BUG();
+
+	size = PAGE_ALIGN(size);
+
+#ifndef CONFIG_MMU
+	/* Clear SHADOW_MASK bit in address, and free as per usual */
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+# endif
+	page = virt_to_page(vaddr);
+
+	do {
+		ClearPageReserved(page);
+		__free_page(page);
+		page++;
+	} while (size -= PAGE_SIZE);
+#else
+	do {
+		pte_t *ptep;
+		unsigned long pfn;
+
+		ptep = pte_offset_kernel(pmd_offset(pgd_offset_k(
+						(unsigned int)vaddr),
+					(unsigned int)vaddr),
+				(unsigned int)vaddr);
+		if (!pte_none(*ptep) && pte_present(*ptep)) {
+			pfn = pte_pfn(*ptep);
+			pte_clear(&init_mm, (unsigned int)vaddr, ptep);
+			if (pfn_valid(pfn)) {
+				page = pfn_to_page(pfn);
+
+				ClearPageReserved(page);
+				__free_page(page);
+			}
+		}
+		vaddr += PAGE_SIZE;
+	} while (size -= PAGE_SIZE);
+
+	/* flush tlb */
+	flush_tlb_all();
+#endif
+}
+EXPORT_SYMBOL(consistent_free);
+
+/*
+ * make an area consistent.
+ */
+void consistent_sync(void *vaddr, size_t size, int direction)
+{
+	unsigned long start;
+	unsigned long end;
+
+	start = (unsigned long)vaddr;
+
+	/* Convert start address back down to unshadowed memory region */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	start &= ~UNCACHED_SHADOW_MASK;
+#endif
+	end = start + size;
+
+	switch (direction) {
+	case PCI_DMA_NONE:
+		BUG();
+	case PCI_DMA_FROMDEVICE:	/* invalidate only */
+		invalidate_dcache_range(start, end);
+		break;
+	case PCI_DMA_TODEVICE:		/* writeback only */
+		flush_dcache_range(start, end);
+		break;
+	case PCI_DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		flush_dcache_range(start, end);
+		break;
+	}
+}
+EXPORT_SYMBOL(consistent_sync);
+
+/*
+ * consistent_sync_page makes memory consistent. identical
+ * to consistent_sync, but takes a struct page instead of a
+ * virtual address
+ */
+void consistent_sync_page(struct page *page, unsigned long offset,
+	size_t size, int direction)
+{
+	unsigned long start = (unsigned long)page_address(page) + offset;
+	consistent_sync((void *)start, size, direction);
+}
+EXPORT_SYMBOL(consistent_sync_page);
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index d9d249a..bab9229 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -106,7 +106,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	regs->esr = error_code;
 
 	/* On a kernel SLB miss we can only check for a valid exception entry */
-	if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+	if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) {
 		printk(KERN_WARNING "kernel task_size exceed");
 		_exception(SIGSEGV, regs, code, address);
 	}
@@ -122,7 +122,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 #endif /* CONFIG_KGDB */
 
-	if (in_atomic() || !mm) {
+	if (unlikely(in_atomic() || !mm)) {
 		if (kernel_mode(regs))
 			goto bad_area_nosemaphore;
 
@@ -150,7 +150,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * source.  If this is invalid we can skip the address space check,
 	 * thus avoiding the deadlock.
 	 */
-	if (!down_read_trylock(&mm->mmap_sem)) {
+	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
 		if (kernel_mode(regs) && !search_exception_tables(regs->pc))
 			goto bad_area_nosemaphore;
 
@@ -158,16 +158,16 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 
 	vma = find_vma(mm, address);
-	if (!vma)
+	if (unlikely(!vma))
 		goto bad_area;
 
 	if (vma->vm_start <= address)
 		goto good_area;
 
-	if (!(vma->vm_flags & VM_GROWSDOWN))
+	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
 		goto bad_area;
 
-	if (!is_write)
+	if (unlikely(!is_write))
 		goto bad_area;
 
 	/*
@@ -179,7 +179,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * before setting the user r1.  Thus we allow the stack to
 	 * expand to 1MB without further checks.
 	 */
-	if (address + 0x100000 < vma->vm_end) {
+	if (unlikely(address + 0x100000 < vma->vm_end)) {
 
 		/* get user regs even if this fault is in kernel mode */
 		struct pt_regs *uregs = current->thread.regs;
@@ -209,15 +209,15 @@ good_area:
 	code = SEGV_ACCERR;
 
 	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
+	if (unlikely(is_write)) {
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
 			goto bad_area;
 	/* a read */
 	} else {
 		/* protection fault */
-		if (error_code & 0x08000000)
+		if (unlikely(error_code & 0x08000000))
 			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+		if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC))))
 			goto bad_area;
 	}
 
@@ -235,7 +235,7 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (unlikely(fault & VM_FAULT_MAJOR))
 		current->maj_flt++;
 	else
 		current->min_flt++;
@@ -273,16 +273,11 @@ bad_area_nosemaphore:
  * us unable to handle the page fault gracefully.
  */
 out_of_memory:
-	if (current->pid == 1) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
 	up_read(&mm->mmap_sem);
-	printk(KERN_WARNING "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_exit(SIGKILL);
-	bad_page_fault(regs, address, SIGKILL);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
 	return;
 
 do_sigbus:
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index a57cedf..db59349 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -10,11 +10,12 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h> /* mem_init */
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/pfn.h>
+#include <linux/slab.h>
 #include <linux/swap.h>
 
 #include <asm/page.h>
@@ -23,6 +24,9 @@
 #include <asm/sections.h>
 #include <asm/tlb.h>
 
+/* Use for MMU and noMMU because of PCI generic code */
+int mem_init_done;
+
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
@@ -30,7 +34,6 @@ EXPORT_SYMBOL(__page_offset);
 #else
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-int mem_init_done;
 static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
@@ -44,6 +47,7 @@ unsigned long memory_start;
 EXPORT_SYMBOL(memory_start);
 unsigned long memory_end; /* due to mm/nommu.c */
 unsigned long memory_size;
+EXPORT_SYMBOL(memory_size);
 
 /*
  * paging_init() sets up the page tables - in fact we've already done this.
@@ -72,10 +76,10 @@ void __init setup_memory(void)
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		memory_start = (u32) lmb.memory.region[i].base;
-		memory_end = (u32) lmb.memory.region[i].base
-				+ (u32) lmb.memory.region[i].size;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		memory_start = (u32) memblock.memory.region[i].base;
+		memory_end = (u32) memblock.memory.region[i].base
+				+ (u32) memblock.memory.region[i].size;
 		if ((memory_start <= (u32)_text) &&
 					((u32)_text <= memory_end)) {
 			memory_size = memory_end - memory_start;
@@ -96,7 +100,7 @@ void __init setup_memory(void)
 	kernel_align_start = PAGE_DOWN((u32)_text);
 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
-	lmb_reserve(kernel_align_start, kernel_align_size);
+	memblock_reserve(kernel_align_start, kernel_align_size);
 	printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
@@ -137,18 +141,18 @@ void __init setup_memory(void)
 	map_size = init_bootmem_node(&contig_page_data,
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
 
 	/* reserve allocate blocks */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
+	for (i = 0; i < memblock.reserved.cnt; i++) {
 		pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
-			(u32) lmb.reserved.region[i].base,
-			(u32) lmb_size_bytes(&lmb.reserved, i));
-		reserve_bootmem(lmb.reserved.region[i].base,
-			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+			(u32) memblock.reserved.region[i].base,
+			(u32) memblock_size_bytes(&memblock.reserved, i));
+		reserve_bootmem(memblock.reserved.region[i].base,
+			memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
 #ifdef CONFIG_MMU
 	init_bootmem_done = 1;
@@ -163,7 +167,6 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	for (addr = begin; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)addr, 0xcc, PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
 	}
@@ -193,12 +196,6 @@ void free_initmem(void)
 			(unsigned long)(&__init_end));
 }
 
-/* FIXME from arch/powerpc/mm/mem.c*/
-void show_mem(void)
-{
-	printk(KERN_NOTICE "%s\n", __func__);
-}
-
 void __init mem_init(void)
 {
 	high_memory = (void *)__va(memory_end);
@@ -208,20 +205,14 @@ void __init mem_init(void)
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
 	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
-#ifdef CONFIG_MMU
 	mem_init_done = 1;
-#endif
 }
 
 #ifndef CONFIG_MMU
-/* Check against bounds of physical memory */
-int ___range_ok(unsigned long addr, unsigned long size)
+int page_is_ram(unsigned long pfn)
 {
-	return ((addr < memory_start) ||
-		((addr + size) > memory_end));
+	return __range_ok(pfn, 0);
 }
-EXPORT_SYMBOL(___range_ok);
-
 #else
 int page_is_ram(unsigned long pfn)
 {
@@ -244,7 +235,7 @@ static void mm_cmdline_setup(void)
 		if (maxmem && memory_size > maxmem) {
 			memory_size = maxmem;
 			memory_end = memory_start + memory_size;
-			lmb.memory.region[0].size = memory_size;
+			memblock.memory.region[0].size = memory_size;
 		}
 	}
 }
@@ -282,19 +273,19 @@ asmlinkage void __init mmu_init(void)
 {
 	unsigned int kstart, ksize;
 
-	if (!lmb.reserved.cnt) {
+	if (!memblock.reserved.cnt) {
 		printk(KERN_EMERG "Error memory count\n");
 		machine_restart(NULL);
 	}
 
-	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+	if ((u32) memblock.memory.region[0].size < 0x1000000) {
 		printk(KERN_EMERG "Memory must be greater than 16MB\n");
 		machine_restart(NULL);
 	}
 	/* Find main memory where the kernel is */
-	memory_start = (u32) lmb.memory.region[0].base;
-	memory_end = (u32) lmb.memory.region[0].base +
-				(u32) lmb.memory.region[0].size;
+	memory_start = (u32) memblock.memory.region[0].base;
+	memory_end = (u32) memblock.memory.region[0].base +
+				(u32) memblock.memory.region[0].size;
 	memory_size = memory_end - memory_start;
 
 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -306,7 +297,7 @@ asmlinkage void __init mmu_init(void)
 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 	/* kernel size */
 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
-	lmb_reserve(kstart, ksize);
+	memblock_reserve(kstart, ksize);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/* Remove the init RAM disk from the available memory. */
@@ -344,9 +335,32 @@ void __init *early_get_page(void)
 		 * Mem start + 32MB -> here is limit
 		 * because of mem mapping from head.S
 		 */
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					memory_start + 0x2000000));
 	}
 	return p;
 }
+
 #endif /* CONFIG_MMU */
+
+void * __init_refok alloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	if (mem_init_done)
+		return kmalloc(size, mask);
+	else
+		return alloc_bootmem(size);
+}
+
+void * __init_refok zalloc_maybe_bootmem(size_t size, gfp_t mask)
+{
+	void *p;
+
+	if (mem_init_done)
+		p = kzalloc(size, mask);
+	else {
+		p = alloc_bootmem(size);
+		if (p)
+			memset(p, 0, size);
+	}
+	return p;
+}
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 2820081..59bf233 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -42,6 +42,7 @@
 
 unsigned long ioremap_base;
 unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot);
 
 /* The maximum lowmem defaults to 768Mb, but this can be configured to
  * another value.
@@ -103,7 +104,7 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
 		area = get_vm_area(size, VM_IOREMAP);
 		if (area == NULL)
 			return NULL;
-		v = VMALLOC_VMADDR(area->addr);
+		v = (unsigned long) area->addr;
 	} else {
 		v = (ioremap_bot -= size);
 	}
@@ -154,31 +155,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 		err = 0;
 		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
 				__pgprot(flags)));
-		if (mem_init_done)
+		if (unlikely(mem_init_done))
 			flush_HPTE(0, va, pmd_val(*pd));
 			/* flush_HPTE(0, va, pg); */
 	}
 	return err;
 }
 
-void __init adjust_total_lowmem(void)
-{
-/* TBD */
-#if 0
-	unsigned long max_low_mem = MAX_LOW_MEM;
-
-	if (total_lowmem > max_low_mem) {
-		total_lowmem = max_low_mem;
-#ifndef CONFIG_HIGHMEM
-		printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
-				"CONFIG_HIGHMEM to reach %ld Mb\n",
-				max_low_mem >> 20, total_memory >> 20);
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-#endif
-}
-
 /*
  * Map in all of physical memory starting at CONFIG_KERNEL_START.
  */
@@ -206,24 +189,6 @@ void __init mapin_ram(void)
 /* is x a power of 2? */
 #define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
 
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-	/* Put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
 /* Scan the real Linux page tables and return a PTE pointer for
  * a virtual address in a context.
  * Returns true (1) if PTE was found, zero otherwise.  The pointer to
@@ -274,3 +239,18 @@ unsigned long iopa(unsigned long addr)
 
 	return pa;
 }
+
+__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+		unsigned long address)
+{
+	pte_t *pte;
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL |
+					__GFP_REPEAT | __GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}
diff --git a/arch/microblaze/pci/Makefile b/arch/microblaze/pci/Makefile
new file mode 100644
index 0000000..9889cc2
--- /dev/null
+++ b/arch/microblaze/pci/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile
+#
+
+obj-$(CONFIG_PCI)		+= pci_32.o pci-common.o indirect_pci.o iomap.o
+obj-$(CONFIG_PCI_XILINX)	+= xilinx_pci.o
diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c
new file mode 100644
index 0000000..25f18f0
--- /dev/null
+++ b/arch/microblaze/pci/indirect_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+static int
+indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc; /* Only 3 bits for function */
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3); /* Only 3 bits for function */
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_data);
+		break;
+	case 2:
+		*val = in_le16(cfg_data);
+		break;
+	default:
+		*val = in_le32(cfg_data);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	volatile void __iomem *cfg_data;
+	u8 cfg_type = 0;
+	u32 bus_no, reg;
+
+	if (hose->indirect_type & INDIRECT_TYPE_NO_PCIE_LINK) {
+		if (bus->number != hose->first_busno)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (hose->indirect_type & INDIRECT_TYPE_SET_CFG_TYPE)
+		if (bus->number != hose->first_busno)
+			cfg_type = 1;
+
+	bus_no = (bus->number == hose->first_busno) ?
+			hose->self_busno : bus->number;
+
+	if (hose->indirect_type & INDIRECT_TYPE_EXT_REG)
+		reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
+	else
+		reg = offset & 0xfc;
+
+	if (hose->indirect_type & INDIRECT_TYPE_BIG_ENDIAN)
+		out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+	else
+		out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
+			 (devfn << 8) | reg | cfg_type));
+
+	/* surpress setting of PCI_PRIMARY_BUS */
+	if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
+		if ((offset == PCI_PRIMARY_BUS) &&
+			(bus->number == hose->first_busno))
+			val &= 0xffffff00;
+
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	cfg_data = hose->cfg_data + (offset & 3);
+	switch (len) {
+	case 1:
+		out_8(cfg_data, val);
+		break;
+	case 2:
+		out_le16(cfg_data, val);
+		break;
+	default:
+		out_le32(cfg_data, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pci_ops = {
+	.read = indirect_read_config,
+	.write = indirect_write_config,
+};
+
+void __init
+setup_indirect_pci(struct pci_controller *hose,
+		   resource_size_t cfg_addr,
+		   resource_size_t cfg_data, u32 flags)
+{
+	resource_size_t base = cfg_addr & PAGE_MASK;
+	void __iomem *mbase;
+
+	mbase = ioremap(base, PAGE_SIZE);
+	hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
+	if ((cfg_data & PAGE_MASK) != base)
+		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+	hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
+	hose->ops = &indirect_pci_ops;
+	hose->indirect_type = flags;
+}
diff --git a/arch/microblaze/pci/iomap.c b/arch/microblaze/pci/iomap.c
new file mode 100644
index 0000000..3fbf16f
--- /dev/null
+++ b/arch/microblaze/pci/iomap.c
@@ -0,0 +1,39 @@
+/*
+ * ppc64 "iomap" interface implementation.
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	resource_size_t start = pci_resource_start(dev, bar);
+	resource_size_t len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+	if (flags & IORESOURCE_IO)
+		return ioport_map(start, len);
+	if (flags & IORESOURCE_MEM)
+		return ioremap(start, len);
+	/* What? */
+	return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+	if (isa_vaddr_is_ioport(addr))
+		return;
+	if (pcibios_vaddr_is_ioport(addr))
+		return;
+	iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
new file mode 100644
index 0000000..23be25f
--- /dev/null
+++ b/arch/microblaze/pci/pci-common.c
@@ -0,0 +1,1643 @@
+/*
+ * Contains common pci routines for ALL ppc platform
+ * (based on pci_32.c and pci_64.c)
+ *
+ * Port for PPC64 David Engebretsen, IBM Corp.
+ * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ *
+ * Common pmac/prep/chrp pci routines. -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+/* XXX kill that some day ... */
+static int global_phb_number;		/* Global phb counter */
+
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
+
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int pci_flags;
+
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
+
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+struct dma_map_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+	int rc;
+
+	rc = dma_set_mask(&dev->dev, mask);
+	dev->dev.coherent_dma_mask = dev->dma_mask;
+
+	return rc;
+}
+
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+	if (!phb)
+		return NULL;
+	spin_lock(&hose_spinlock);
+	phb->global_number = global_phb_number++;
+	list_add_tail(&phb->list_node, &hose_list);
+	spin_unlock(&hose_spinlock);
+	phb->dn = dev;
+	phb->is_dynamic = mem_init_done;
+	return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	spin_lock(&hose_spinlock);
+	list_del(&phb->list_node);
+	spin_unlock(&hose_spinlock);
+
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+	return hose->io_resource.end - hose->io_resource.start + 1;
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	int ret = 0;
+	struct pci_controller *hose;
+	resource_size_t size;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_virt &&
+		    address < (hose->io_base_virt + size)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+	return ret;
+}
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	struct pci_controller *hose;
+	resource_size_t size;
+	unsigned long ret = ~0;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_phys &&
+		    address < (hose->io_base_phys + size)) {
+			unsigned long base =
+				(unsigned long)hose->io_base_virt - _IO_BASE;
+			ret = base + (address - hose->io_base_phys);
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+/*
+ * Return the domain number for this bus.
+ */
+int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return hose->global_number;
+}
+EXPORT_SYMBOL(pci_domain_nr);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node)
+{
+	while (node) {
+		struct pci_controller *hose, *tmp;
+		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+			if (hose->dn == node)
+				return hose;
+		node = node->parent;
+	}
+	return NULL;
+}
+
+static ssize_t pci_show_devspec(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
+	struct device_node *np;
+
+	pdev = to_pci_dev(dev);
+	np = pci_device_to_OF_node(pdev);
+	if (np == NULL || np->full_name == NULL)
+		return 0;
+	return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+/* Add sysfs properties */
+int pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+	return device_create_file(&pdev->dev, &dev_attr_devspec);
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+	return str;
+}
+
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+	struct of_irq oirq;
+	unsigned int virq;
+
+	/* The current device-tree that iSeries generates from the HV
+	 * PCI informations doesn't contain proper interrupt routing,
+	 * and all the fallback would do is print out crap, so we
+	 * don't attempt to resolve the interrupts here at all, some
+	 * iSeries specific fixup does it.
+	 *
+	 * In the long run, we will hopefully fix the generated device-tree
+	 * instead.
+	 */
+	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
+
+#ifdef DEBUG
+	memset(&oirq, 0xff, sizeof(oirq));
+#endif
+	/* Try to get a mapping from the device-tree */
+	if (of_irq_map_pci(pci_dev, &oirq)) {
+		u8 line, pin;
+
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff || line == 0) {
+			return -1;
+		}
+		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+			 line, pin);
+
+		virq = irq_create_mapping(NULL, line);
+		if (virq != NO_IRQ)
+			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	} else {
+		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+			 oirq.size, oirq.specifier[0], oirq.specifier[1],
+			 oirq.controller ? oirq.controller->full_name :
+			 "<default>");
+
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+	}
+	if (virq == NO_IRQ) {
+		pr_debug(" Failed to map !\n");
+		return -1;
+	}
+
+	pr_debug(" Mapped to linux irq %d\n", virq);
+
+	pci_dev->irq = virq;
+
+	return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s,
+ * modelled on the sparc64 implementation by Dave Miller.
+ *  -- paulus.
+ */
+
+/*
+ * Adjust vm_pgoff of VMA such that it is the physical page offset
+ * corresponding to the 32-bit pci bus offset for DEV requested by the user.
+ *
+ * Basically, the user finds the base address for his device which he wishes
+ * to mmap.  They read the 32-bit value from the config space base register,
+ * add whatever PAGE_SIZE multiple offset they wish, and feed this into the
+ * offset parameter of mmap on /proc/bus/pci/XXX for that device.
+ *
+ * Returns negative error code on failure, zero on success.
+ */
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+					       resource_size_t *offset,
+					       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	unsigned long io_offset = 0;
+	int i, res_bit;
+
+	if (hose == 0)
+		return NULL;		/* should never happen */
+
+	/* If memory, add on the PCI bridge address offset */
+	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
+		*offset += hose->pci_mem_offset;
+#endif
+		res_bit = IORESOURCE_MEM;
+	} else {
+		io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		*offset += io_offset;
+		res_bit = IORESOURCE_IO;
+	}
+
+	/*
+	 * Check that the offset requested corresponds to one of the
+	 * resources of the device.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+		struct resource *rp = &dev->resource[i];
+		int flags = rp->flags;
+
+		/* treat ROM as memory (should be already) */
+		if (i == PCI_ROM_RESOURCE)
+			flags |= IORESOURCE_MEM;
+
+		/* Active and same type? */
+		if ((flags & res_bit) == 0)
+			continue;
+
+		/* In the range of this resource? */
+		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+			continue;
+
+		/* found it! construct the final physical address */
+		if (mmap_state == pci_mmap_io)
+			*offset += hose->io_base_phys - io_offset;
+		return rp;
+	}
+
+	return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+				      pgprot_t protection,
+				      enum pci_mmap_state mmap_state,
+				      int write_combine)
+{
+	pgprot_t prot = protection;
+
+	/* Write combine is always 0 on non-memory space mappings. On
+	 * memory space, if the user didn't pass 1, we check for a
+	 * "prefetchable" resource. This is a bit hackish, but we use
+	 * this to workaround the inability of /sysfs to provide a write
+	 * combine bit
+	 */
+	if (mmap_state != pci_mmap_mem)
+		write_combine = 0;
+	else if (write_combine == 0) {
+		if (rp->flags & IORESOURCE_PREFETCH)
+			write_combine = 1;
+	}
+
+	return pgprot_noncached(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+				  unsigned long pfn,
+				  unsigned long size,
+				  pgprot_t prot)
+{
+	struct pci_dev *pdev = NULL;
+	struct resource *found = NULL;
+	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
+	int i;
+
+	if (page_is_ram(pfn))
+		return prot;
+
+	prot = pgprot_noncached(prot);
+	for_each_pci_dev(pdev) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *rp = &pdev->resource[i];
+			int flags = rp->flags;
+
+			/* Active and same type? */
+			if ((flags & IORESOURCE_MEM) == 0)
+				continue;
+			/* In the range of this resource? */
+			if (offset < (rp->start & PAGE_MASK) ||
+			    offset > rp->end)
+				continue;
+			found = rp;
+			break;
+		}
+		if (found)
+			break;
+	}
+	if (found) {
+		if (found->flags & IORESOURCE_PREFETCH)
+			prot = pgprot_noncached_wc(prot);
+		pci_dev_put(pdev);
+	}
+
+	pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+		 (unsigned long long)offset, pgprot_val(prot));
+
+	return prot;
+}
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	struct resource *rp;
+	int ret;
+
+	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+	if (rp == NULL)
+		return -EINVAL;
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+						  vma->vm_page_prot,
+						  mmap_state, write_combine);
+
+	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+	return ret;
+}
+
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	switch (size) {
+	case 1:
+		*((u8 *)val) = in_8(addr);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = in_le16(addr);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = in_le32(addr);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	/* WARNING: The generic code is idiotic. It gets passed a pointer
+	 * to what can be a 1, 2 or 4 byte quantity and always reads that
+	 * as a u32, which means that we have to correct the location of
+	 * the data read within those 32 bits for size 1 and 2
+	 */
+	switch (size) {
+	case 1:
+		out_8(addr, val >> 24);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		out_le16(addr, val >> 16);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		out_le32(addr, val);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+			       struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	resource_size_t size = vma->vm_end - vma->vm_start;
+	struct resource *rp;
+
+	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+		 pci_domain_nr(bus), bus->number,
+		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
+		 (unsigned long long)offset,
+		 (unsigned long long)(offset + size - 1));
+
+	if (mmap_state == pci_mmap_mem) {
+		/* Hack alert !
+		 *
+		 * Because X is lame and can fail starting if it gets an error
+		 * trying to mmap legacy_mem (instead of just moving on without
+		 * legacy memory access) we fake it here by giving it anonymous
+		 * memory, effectively behaving just like /dev/zero
+		 */
+		if ((offset + size) > hose->isa_mem_size) {
+#ifdef CONFIG_MMU
+			printk(KERN_DEBUG
+				"Process %s (pid:%d) mapped non-existing PCI"
+				"legacy memory for 0%04x:%02x\n",
+				current->comm, current->pid, pci_domain_nr(bus),
+								bus->number);
+#endif
+			if (vma->vm_flags & VM_SHARED)
+				return shmem_zero_setup(vma);
+			return 0;
+		}
+		offset += hose->isa_mem_phys;
+	} else {
+		unsigned long io_offset = (unsigned long)hose->io_base_virt - \
+								_IO_BASE;
+		unsigned long roffset = offset + io_offset;
+		rp = &hose->io_resource;
+		if (!(rp->flags & IORESOURCE_IO))
+			return -ENXIO;
+		if (roffset < rp->start || (roffset + size) > rp->end)
+			return -ENXIO;
+		offset += hose->io_base_phys;
+	}
+	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  resource_size_t *start, resource_size_t *end)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0;
+
+	if (hose == NULL)
+		return;
+
+	if (rsrc->flags & IORESOURCE_IO)
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
+
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
+}
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - We can only cope with all memory ranges having the same offset
+ *     between CPU addresses and PCI addresses. Unfortunately, some bridges
+ *     are setup for a large 1:1 mapping along with a small "window" which
+ *     maps PCI address 0 to some arbitrary high address of the CPU space in
+ *     order to give access to the ISA memory hole.
+ *     The way out of here that I've chosen for now is to always set the
+ *     offset based on the first resource found, then override it if we
+ *     have a different offset and the previous was set by an ISA hole.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
+					    struct device_node *dev,
+					    int primary)
+{
+	const u32 *ranges;
+	int rlen;
+	int pna = of_n_addr_cells(dev);
+	int np = pna + 5;
+	int memno = 0, isa_hole = -1;
+	u32 pci_space;
+	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
+	unsigned long long isa_mb = 0;
+	struct resource *res;
+
+	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
+	       dev->full_name, primary ? "(primary)" : "");
+
+	/* Get ranges property */
+	ranges = of_get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+
+	/* Parse it */
+	pr_debug("Parsing ranges property...\n");
+	while ((rlen -= np * 4) >= 0) {
+		/* Read next ranges element */
+		pci_space = ranges[0];
+		pci_addr = of_read_number(ranges + 1, 2);
+		cpu_addr = of_translate_address(dev, ranges + 3);
+		size = of_read_number(ranges + pna + 3, 2);
+
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx "
+				"cpu_addr:0x%016llx size:0x%016llx\n",
+					pci_space, pci_addr, cpu_addr, size);
+
+		ranges += np;
+
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt
+		 * at exposing the VGA memory hole)
+		 */
+		if (cpu_addr == OF_BAD_ADDR || size == 0)
+			continue;
+
+		/* Now consume following elements while they are contiguous */
+		for (; rlen >= np * sizeof(u32);
+		     ranges += np, rlen -= np * 4) {
+			if (ranges[0] != pci_space)
+				break;
+			pci_next = of_read_number(ranges + 1, 2);
+			cpu_next = of_translate_address(dev, ranges + 3);
+			if (pci_next != pci_addr + size ||
+			    cpu_next != cpu_addr + size)
+				break;
+			size += of_read_number(ranges + pna + 3, 2);
+		}
+
+		/* Act based on address space type */
+		res = NULL;
+		switch ((pci_space >> 24) & 0x3) {
+		case 1:		/* PCI IO space */
+			printk(KERN_INFO
+			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* On 32 bits, limit I/O space to 16MB */
+			if (size > 0x01000000)
+				size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(cpu_addr, size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = pci_addr + size;
+			hose->io_base_phys = cpu_addr - pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			res->flags = IORESOURCE_IO;
+			res->start = pci_addr;
+			break;
+		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
+			printk(KERN_INFO
+			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       cpu_addr, cpu_addr + size - 1, pci_addr,
+			       (pci_space & 0x40000000) ? "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (pci_addr == 0) {
+				isa_mb = cpu_addr;
+				isa_hole = memno;
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = cpu_addr;
+				hose->isa_mem_phys = cpu_addr;
+				hose->isa_mem_size = size;
+			}
+
+			/* We get the PCI/Mem offset from the first range or
+			 * the, current one if the offset came from an ISA
+			 * hole. If they don't match, bugger.
+			 */
+			if (memno == 0 ||
+			    (isa_hole >= 0 && pci_addr != 0 &&
+			     hose->pci_mem_offset == isa_mb))
+				hose->pci_mem_offset = cpu_addr - pci_addr;
+			else if (pci_addr != 0 &&
+				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				printk(KERN_INFO
+				       " \\--> Skipped (offset mismatch) !\n");
+				continue;
+			}
+
+			/* Build resource */
+			res = &hose->mem_resources[memno++];
+			res->flags = IORESOURCE_MEM;
+			if (pci_space & 0x40000000)
+				res->flags |= IORESOURCE_PREFETCH;
+			res->start = cpu_addr;
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->end = res->start + size - 1;
+			res->parent = NULL;
+			res->sibling = NULL;
+			res->child = NULL;
+		}
+	}
+
+	/* If there's an ISA hole and the pci_mem_offset is -not- matching
+	 * the ISA hole offset, then we need to remove the ISA hole from
+	 * the resource list for that brige
+	 */
+	if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+		unsigned int next = isa_hole + 1;
+		printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+		if (next < memno)
+			memmove(&hose->mem_resources[isa_hole],
+				&hose->mem_resources[next],
+				sizeof(struct resource) * (memno - next));
+		hose->mem_resources[--memno].flags = 0;
+	}
+}
+
+/* Decide whether to display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS))
+		return 0;
+	if (pci_flags & PCI_COMPAT_DOMAIN_0)
+		return hose->global_number != 0;
+	return 1;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			     struct resource *res)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	region->start = (res->start - offset) & mask;
+	region->end = (res->end - offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			     struct pci_bus_region *region)
+{
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+
+	if (!hose)
+		return;
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+	res->start = (region->start + offset) & mask;
+	res->end = (region->end + offset) & mask;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/* Fixup a bus resource into a linux resource */
+static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	resource_size_t offset = 0, mask = (resource_size_t)-1;
+
+	if (res->flags & IORESOURCE_IO) {
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		mask = 0xffffffffu;
+	} else if (res->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+
+	res->start = (res->start + offset) & mask;
+	res->end = (res->end + offset) & mask;
+}
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	int i;
+
+	if (!hose) {
+		printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+		       pci_name(dev));
+		return;
+	}
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = dev->resource + i;
+		if (!res->flags)
+			continue;
+		/* On platforms that have PCI_PROBE_ONLY set, we don't
+		 * consider 0 as an unassigned BAR value. It's technically
+		 * a valid value, but linux doesn't like it... so when we can
+		 * re-assign things, we do so, but if we can't, we keep it
+		 * around and hope for the best...
+		 */
+		if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) {
+			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \
+							"is unassigned\n",
+				 pci_name(dev), i,
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end,
+				 (unsigned int)res->flags);
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+			continue;
+		}
+
+		pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		fixup_resource(res, dev);
+
+		pr_debug("PCI:%s            %016llx-%016llx\n",
+			 pci_name(dev),
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+							   struct resource *res)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_dev *dev = bus->self;
+	resource_size_t offset;
+	u16 command;
+	int i;
+
+	/* We don't do anything if PCI_PROBE_ONLY is set */
+	if (pci_flags & PCI_PROBE_ONLY)
+		return 0;
+
+	/* Job is a bit different between memory and IO */
+	if (res->flags & IORESOURCE_MEM) {
+		/* If the BAR is non-0 (res != pci_mem_offset) then it's
+		 * probably been initialized by somebody
+		 */
+		if (res->start != hose->pci_mem_offset)
+			return 0;
+
+		/* The BAR is 0, let's check if memory decoding is enabled on
+		 * the bridge. If not, we consider it unassigned
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if ((command & PCI_COMMAND_MEMORY) == 0)
+			return 1;
+
+		/* Memory decoding is enabled and the BAR is 0. If any of
+		 * the bridge resources covers that starting address (0 then
+		 * it's good enough for us for memory
+		 */
+		for (i = 0; i < 3; i++) {
+			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+			   hose->mem_resources[i].start == hose->pci_mem_offset)
+				return 0;
+		}
+
+		/* Well, it starts at 0 and we know it will collide so we may as
+		 * well consider it as unassigned. That covers the Apple case.
+		 */
+		return 1;
+	} else {
+		/* If the BAR is non-0, then we consider it assigned */
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		if (((res->start - offset) & 0xfffffffful) != 0)
+			return 0;
+
+		/* Here, we are a bit different than memory as typically IO
+		 * space starting at low addresses -is- valid. What we do
+		 * instead if that we consider as unassigned anything that
+		 * doesn't have IO enabled in the PCI command register,
+		 * and that's it.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_IO)
+			return 0;
+
+		/* It's starting at 0 and IO is disabled in the bridge, consider
+		 * it unassigned
+		 */
+		return 1;
+	}
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+	struct resource *res;
+	int i;
+
+	struct pci_dev *dev = bus->self;
+
+	pci_bus_for_each_resource(bus, res, i) {
+		res = bus->resource[i];
+		if (!res)
+			continue;
+		if (!res->flags)
+			continue;
+		if (i >= 3 && bus->self->transparent)
+			continue;
+
+		pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+			 pci_name(dev), i,
+			 (unsigned long long)res->start,\
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags);
+
+		/* Perform fixup */
+		fixup_resource(res, dev);
+
+		/* Try to detect uninitialized P2P bridge resources,
+		 * and clear them out so they get re-assigned later
+		 */
+		if (pcibios_uninitialized_bridge_resource(bus, res)) {
+			res->flags = 0;
+			pr_debug("PCI:%s            (unassigned)\n",
+								pci_name(dev));
+		} else {
+			pr_debug("PCI:%s            %016llx-%016llx\n",
+				 pci_name(dev),
+				 (unsigned long long)res->start,
+				 (unsigned long long)res->end);
+		}
+	}
+}
+
+void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
+{
+	/* Fix up the bus resources for P2P bridges */
+	if (bus->self != NULL)
+		pcibios_fixup_bridge(bus);
+}
+
+void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	pr_debug("PCI: Fixup bus devices %d (%s)\n",
+		 bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		struct dev_archdata *sd = &dev->dev.archdata;
+
+		/* Setup OF node pointer in archdata */
+		sd->of_node = pci_device_to_OF_node(dev);
+
+		/* Fixup NUMA node as it may not be setup yet by the generic
+		 * code and is needed by the DMA init
+		 */
+		set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+		/* Hook up default DMA ops */
+		sd->dma_ops = pci_dma_ops;
+		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+
+		/* Read default IRQs and fixup if necessary */
+		pci_read_irq_line(dev);
+	}
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* When called from the generic PCI probe, read PCI<->PCI bridge
+	 * bases. This is -not- called when generating the PCI tree from
+	 * the OF device-tree.
+	 */
+	if (bus->self != NULL)
+		pci_read_bridge_bases(bus);
+
+	/* Now fixup the bus bus */
+	pcibios_setup_bus_self(bus);
+
+	/* Now fixup devices on that bus */
+	pcibios_setup_bus_devices(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+	if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) &&
+	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+		return 1;
+	return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		if (skip_isa_ioresource_align(dev))
+			return start;
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+
+	return start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init reparent_resources(struct resource *parent,
+				     struct resource *res)
+{
+	struct resource *p, **pp;
+	struct resource **firstpp = NULL;
+
+	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+		if (p->end < res->start)
+			continue;
+		if (res->end < p->start)
+			break;
+		if (p->start < res->start || p->end > res->end)
+			return -1;	/* not completely contained */
+		if (firstpp == NULL)
+			firstpp = pp;
+	}
+	if (firstpp == NULL)
+		return -1;	/* didn't find any conflicting entries? */
+	res->parent = parent;
+	res->child = *firstpp;
+	res->sibling = *pp;
+	*firstpp = res;
+	*pp = NULL;
+	for (p = res->child; p != NULL; p = p->sibling) {
+		p->parent = res;
+		pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+			 p->name,
+			 (unsigned long long)p->start,
+			 (unsigned long long)p->end, res->name);
+	}
+	return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	int i;
+	struct resource *res, *pr;
+
+	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+		 pci_domain_nr(bus), bus->number);
+
+	pci_bus_for_each_resource(bus, res, i) {
+		res = bus->resource[i];
+		if (!res || !res->flags
+		    || res->start > res->end || res->parent)
+			continue;
+		if (bus->parent == NULL)
+			pr = (res->flags & IORESOURCE_IO) ?
+				&ioport_resource : &iomem_resource;
+		else {
+			/* Don't bother with non-root busses when
+			 * re-assigning all resources. We clear the
+			 * resource flags as if they were colliding
+			 * and as such ensure proper re-allocation
+			 * later.
+			 */
+			if (pci_flags & PCI_REASSIGN_ALL_RSRC)
+				goto clear_resource;
+			pr = pci_find_parent_resource(bus->self, res);
+			if (pr == res) {
+				/* this happens when the generic PCI
+				 * code (wrongly) decides that this
+				 * bridge is transparent  -- paulus
+				 */
+				continue;
+			}
+		}
+
+		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+			 "[0x%x], parent %p (%s)\n",
+			 bus->self ? pci_name(bus->self) : "PHB",
+			 bus->number, i,
+			 (unsigned long long)res->start,
+			 (unsigned long long)res->end,
+			 (unsigned int)res->flags,
+			 pr, (pr && pr->name) ? pr->name : "nil");
+
+		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			if (request_resource(pr, res) == 0)
+				continue;
+			/*
+			 * Must be a conflict with an existing entry.
+			 * Move that entry (or entries) under the
+			 * bridge resource and try again.
+			 */
+			if (reparent_resources(pr, res) == 0)
+				continue;
+		}
+		printk(KERN_WARNING "PCI: Cannot allocate resource region "
+		       "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+		res->start = res->end = 0;
+		res->flags = 0;
+	}
+
+	list_for_each_entry(b, &bus->children, node)
+		pcibios_allocate_bus_resources(b);
+}
+
+static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
+{
+	struct resource *pr, *r = &dev->resource[idx];
+
+	pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+		 pci_name(dev), idx,
+		 (unsigned long long)r->start,
+		 (unsigned long long)r->end,
+		 (unsigned int)r->flags);
+
+	pr = pci_find_parent_resource(dev, r);
+	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+	    request_resource(pr, r) < 0) {
+		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+		       " of device %s, will remap\n", idx, pci_name(dev));
+		if (pr)
+			pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
+				 pr,
+				 (unsigned long long)pr->start,
+				 (unsigned long long)pr->end,
+				 (unsigned int)pr->flags);
+		/* We'll assign a new address later */
+		r->flags |= IORESOURCE_UNSET;
+		r->end -= r->start;
+		r->start = 0;
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE)
+				disabled = 1;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled)
+				alloc_resource(dev, idx);
+		}
+		if (pass)
+			continue;
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		if (r->flags) {
+			/* Turn the ROM off, leave the resource region,
+			 * but keep it unregistered.
+			 */
+			u32 reg;
+			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t	offset;
+	struct resource *res, *pres;
+	int i;
+
+	pr_debug("Reserving legacy ranges for domain %04x\n",
+							pci_domain_nr(bus));
+
+	/* Check for IO */
+	if (!(hose->io_resource.flags & IORESOURCE_IO))
+		goto no_io;
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy IO";
+	res->flags = IORESOURCE_IO;
+	res->start = offset;
+	res->end = (offset + 0xfff) & 0xfffffffful;
+	pr_debug("Candidate legacy IO: %pR\n", res);
+	if (request_resource(&hose->io_resource, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+
+ no_io:
+	/* Check for memory */
+	offset = hose->pci_mem_offset;
+	pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
+	for (i = 0; i < 3; i++) {
+		pres = &hose->mem_resources[i];
+		if (!(pres->flags & IORESOURCE_MEM))
+			continue;
+		pr_debug("hose mem res: %pR\n", pres);
+		if ((pres->start - offset) <= 0xa0000 &&
+		    (pres->end - offset) >= 0xbffff)
+			break;
+	}
+	if (i >= 3)
+		return;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy VGA memory";
+	res->flags = IORESOURCE_MEM;
+	res->start = 0xa0000 + offset;
+	res->end = 0xbffff + offset;
+	pr_debug("Candidate VGA memory: %pR\n", res);
+	if (request_resource(pres, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+}
+
+void __init pcibios_resource_survey(void)
+{
+	struct pci_bus *b;
+
+	/* Allocate and assign resources. If we re-assign everything, then
+	 * we skip the allocate phase
+	 */
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_allocate_bus_resources(b);
+
+	if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) {
+		pcibios_allocate_resources(0);
+		pcibios_allocate_resources(1);
+	}
+
+	/* Before we start assigning unassigned resource, we try to reserve
+	 * the low IO area and the VGA memory area if they intersect the
+	 * bus available resources to avoid allocating things on top of them
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		list_for_each_entry(b, &pci_root_buses, node)
+			pcibios_reserve_legacy_regions(b);
+	}
+
+	/* Now, if the platform didn't decide to blindly trust the firmware,
+	 * we proceed to assigning things that were left unassigned
+	 */
+	if (!(pci_flags & PCI_PROBE_ONLY)) {
+		pr_debug("PCI: Assigning unassigned resources...\n");
+		pci_assign_unassigned_resources();
+	}
+}
+
+#ifdef CONFIG_HOTPLUG
+
+/* This is used by the PCI hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
+ */
+void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int i;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource *r = &dev->resource[i];
+
+			if (r->parent || !r->start || !r->flags)
+				continue;
+
+			pr_debug("PCI: Claiming %s: "
+				 "Resource %d: %016llx..%016llx [%x]\n",
+				 pci_name(dev), i,
+				 (unsigned long long)r->start,
+				 (unsigned long long)r->end,
+				 (unsigned int)r->flags);
+
+			pci_claim_resource(dev, i);
+		}
+	}
+
+	list_for_each_entry(child_bus, &bus->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+	pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
+
+	/* Allocate bus and devices resources */
+	pcibios_allocate_bus_resources(bus);
+	pcibios_claim_one_bus(bus);
+
+	/* Add new devices to global lists.  Register in proc, sysfs. */
+	pci_bus_add_devices(bus);
+
+	/* Fixup EEH */
+	/* eeh_add_device_tree_late(bus); */
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
+#endif /* CONFIG_HOTPLUG */
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	return pci_enable_resources(dev, mask);
+}
+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+	struct pci_bus *bus = hose->bus;
+	struct resource *res;
+	int i;
+
+	/* Hookup PHB IO resource */
+	bus->resource[0] = res = &hose->io_resource;
+
+	if (!res->flags) {
+		printk(KERN_WARNING "PCI: I/O resource not set for host"
+		       " bridge %s (domain %d)\n",
+		       hose->dn->full_name, hose->global_number);
+		/* Workaround for lack of IO resource only on 32-bit */
+		res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+		res->end = res->start + IO_SPACE_LIMIT;
+		res->flags = IORESOURCE_IO;
+	}
+
+	pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
+		 (unsigned long long)res->start,
+		 (unsigned long long)res->end,
+		 (unsigned long)res->flags);
+
+	/* Hookup PHB Memory resources */
+	for (i = 0; i < 3; ++i) {
+		res = &hose->mem_resources[i];
+		if (!res->flags) {
+			if (i > 0)
+				continue;
+			printk(KERN_ERR "PCI: Memory resource 0 not set for "
+			       "host bridge %s (domain %d)\n",
+			       hose->dn->full_name, hose->global_number);
+
+			/* Workaround for lack of MEM resource only on 32-bit */
+			res->start = hose->pci_mem_offset;
+			res->end = (resource_size_t)-1LL;
+			res->flags = IORESOURCE_MEM;
+
+		}
+		bus->resource[i+1] = res;
+
+		pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n",
+			i, (unsigned long long)res->start,
+			(unsigned long long)res->end,
+			(unsigned long)res->flags);
+	}
+
+	pr_debug("PCI: PHB MEM offset     = %016llx\n",
+		 (unsigned long long)hose->pci_mem_offset);
+	pr_debug("PCI: PHB IO  offset     = %08lx\n",
+		 (unsigned long)hose->io_base_virt - _IO_BASE);
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops = {
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (!hose)
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose ? hose->ops : &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c
new file mode 100644
index 0000000..3c3d808
--- /dev/null
+++ b/arch/microblaze/pci/pci_32.c
@@ -0,0 +1,431 @@
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+unsigned long isa_io_base;
+unsigned long pci_dram_offset;
+int pcibios_assign_bus_offset = 1;
+
+static u8 *pci_to_OF_bus_map;
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+static int pci_assign_all_buses;
+
+static int pci_bus_count;
+
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void
+make_one_node_map(struct device_node *node, u8 pci_bus)
+{
+	const int *bus_range;
+	int len;
+
+	if (pci_bus >= pci_bus_count)
+		return;
+	bus_range = of_get_property(node, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, "
+		       "assuming it starts at 0\n", node->full_name);
+		pci_to_OF_bus_map[pci_bus] = 0;
+	} else
+		pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+	for_each_child_of_node(node, node) {
+		struct pci_dev *dev;
+		const unsigned int *class_code, *reg;
+
+		class_code = of_get_property(node, "class-code", NULL);
+		if (!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+			continue;
+		reg = of_get_property(node, "reg", NULL);
+		if (!reg)
+			continue;
+		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		if (!dev || !dev->subordinate) {
+			pci_dev_put(dev);
+			continue;
+		}
+		make_one_node_map(node, dev->subordinate->number);
+		pci_dev_put(dev);
+	}
+}
+
+void
+pcibios_make_OF_bus_map(void)
+{
+	int i;
+	struct pci_controller *hose, *tmp;
+	struct property *map_prop;
+	struct device_node *dn;
+
+	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
+	if (!pci_to_OF_bus_map) {
+		printk(KERN_ERR "Can't allocate OF bus map !\n");
+		return;
+	}
+
+	/* We fill the bus map with invalid values, that helps
+	 * debugging.
+	 */
+	for (i = 0; i < pci_bus_count; i++)
+		pci_to_OF_bus_map[i] = 0xff;
+
+	/* For each hose, we begin searching bridges */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		struct device_node *node = hose->dn;
+
+		if (!node)
+			continue;
+		make_one_node_map(node, hose->first_busno);
+	}
+	dn = of_find_node_by_path("/");
+	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
+	if (map_prop) {
+		BUG_ON(pci_bus_count > map_prop->length);
+		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
+	}
+	of_node_put(dn);
+#ifdef DEBUG
+	printk(KERN_INFO "PCI->OF bus map:\n");
+	for (i = 0; i < pci_bus_count; i++) {
+		if (pci_to_OF_bus_map[i] == 0xff)
+			continue;
+		printk(KERN_INFO "%d -> %d\n", i, pci_to_OF_bus_map[i]);
+	}
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node *node, void *data);
+
+static struct device_node *scan_OF_pci_childs(struct device_node *parent,
+					pci_OF_scan_iterator filter, void *data)
+{
+	struct device_node *node;
+	struct device_node *sub_node;
+
+	for_each_child_of_node(parent, node) {
+		const unsigned int *class_code;
+
+		if (filter(node, data)) {
+			of_node_put(node);
+			return node;
+		}
+
+		/* For PCI<->PCI bridges or CardBus bridges, we go down
+		 * Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well.
+		 */
+		class_code = of_get_property(node, "class-code", NULL);
+		if ((!class_code ||
+			((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+			strcmp(node->name, "multifunc-device"))
+			continue;
+		sub_node = scan_OF_pci_childs(node, filter, data);
+		if (sub_node) {
+			of_node_put(node);
+			return sub_node;
+		}
+	}
+	return NULL;
+}
+
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+					       unsigned int devfn)
+{
+	struct device_node *np, *cnp;
+	const u32 *reg;
+	unsigned int psize;
+
+	for_each_child_of_node(parent, np) {
+		reg = of_get_property(np, "reg", &psize);
+		if (reg && psize >= 4 && ((reg[0] >> 8) & 0xff) == devfn)
+			return np;
+
+		/* Note: some OFs create a parent node "multifunc-device" as
+		 * a fake root for all functions of a multi-function device,
+		 * we go down them as well. */
+		if (!strcmp(np->name, "multifunc-device")) {
+			cnp = scan_OF_for_pci_dev(np, devfn);
+			if (cnp)
+				return cnp;
+		}
+	}
+	return NULL;
+}
+
+
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
+{
+	struct device_node *parent, *np;
+
+	/* Are we a root bus ? */
+	if (bus->self == NULL || bus->parent == NULL) {
+		struct pci_controller *hose = pci_bus_to_host(bus);
+		if (hose == NULL)
+			return NULL;
+		return of_node_get(hose->dn);
+	}
+
+	/* not a root bus, we need to get our parent */
+	parent = scan_OF_for_pci_bus(bus->parent);
+	if (parent == NULL)
+		return NULL;
+
+	/* now iterate for children for a match */
+	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+	of_node_put(parent);
+
+	return np;
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+	struct device_node *parent, *np;
+
+	pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+	parent = scan_OF_for_pci_bus(bus);
+	if (parent == NULL)
+		return NULL;
+	pr_debug(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+	np = scan_OF_for_pci_dev(parent, devfn);
+	of_node_put(parent);
+	pr_debug(" result is %s\n", np ? np->full_name : "<NULL>");
+
+	/* XXX most callers don't release the returned node
+	 * mostly because ppc64 doesn't increase the refcount,
+	 * we need to fix that.
+	 */
+	return np;
+}
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+static int
+find_OF_pci_device_filter(struct device_node *node, void *data)
+{
+	return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
+{
+	const unsigned int *reg;
+	struct pci_controller *hose;
+	struct pci_dev *dev = NULL;
+
+	/* Make sure it's really a PCI device */
+	hose = pci_find_hose_for_OF_device(node);
+	if (!hose || !hose->dn)
+		return -ENODEV;
+	if (!scan_OF_pci_childs(hose->dn,
+			find_OF_pci_device_filter, (void *)node))
+		return -ENODEV;
+	reg = of_get_property(node, "reg", NULL);
+	if (!reg)
+		return -ENODEV;
+	*bus = (reg[0] >> 16) & 0xff;
+	*devfn = ((reg[0] >> 8) & 0xff);
+
+	/* Ok, here we need some tweak. If we have already renumbered
+	 * all busses, we can't rely on the OF bus number any more.
+	 * the pci_to_OF_bus_map is not enough as several PCI busses
+	 * may match the same OF bus number.
+	 */
+	if (!pci_to_OF_bus_map)
+		return 0;
+
+	for_each_pci_dev(dev)
+		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+				dev->devfn == *devfn) {
+			*bus = dev->bus->number;
+			pci_dev_put(dev);
+			return 0;
+		}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(pci_device_from_OF_node);
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+	struct property *of_prop;
+	struct device_node *dn;
+
+	of_prop = (struct property *) alloc_bootmem(sizeof(struct property) + \
+									 256);
+	if (!of_prop)
+		return;
+	dn = of_find_node_by_path("/");
+	if (dn) {
+		memset(of_prop, -1, sizeof(struct property) + 256);
+		of_prop->name = "pci-OF-bus-map";
+		of_prop->length = 256;
+		of_prop->value = &of_prop[1];
+		prom_add_property(dn, of_prop);
+		of_node_put(dn);
+	}
+}
+
+static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	unsigned long io_offset;
+	struct resource *res = &hose->io_resource;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+	if (bus == NULL) {
+		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+		       hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Fixup IO space offset */
+	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+	res->start = (res->start + io_offset) & 0xffffffffu;
+	res->end = (res->end + io_offset) & 0xffffffffu;
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Scan children */
+	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
+
+static int __init pcibios_init(void)
+{
+	struct pci_controller *hose, *tmp;
+	int next_busno = 0;
+
+	printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+	if (pci_flags & PCI_REASSIGN_ALL_BUS) {
+		printk(KERN_INFO "setting pci_asign_all_busses\n");
+		pci_assign_all_buses = 1;
+	}
+
+	/* Scan all of the recorded PCI controllers.  */
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		if (pci_assign_all_buses)
+			hose->first_busno = next_busno;
+		hose->last_busno = 0xff;
+		pcibios_scan_phb(hose);
+		printk(KERN_INFO "calling pci_bus_add_devices()\n");
+		pci_bus_add_devices(hose->bus);
+		if (pci_assign_all_buses || next_busno <= hose->last_busno)
+			next_busno = hose->last_busno + \
+					pcibios_assign_bus_offset;
+	}
+	pci_bus_count = next_busno;
+
+	/* OpenFirmware based machines need a map of OF bus
+	 * numbers vs. kernel bus numbers since we may have to
+	 * remap them.
+	 */
+	if (pci_assign_all_buses)
+		pcibios_make_OF_bus_map();
+
+	/* Call common code to handle resource allocation */
+	pcibios_resource_survey();
+
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+static struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+	struct pci_controller *hose, *tmp;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+		if (bus >= hose->first_busno && bus <= hose->last_busno)
+			return hose;
+	return NULL;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+	struct pci_controller *hose;
+	long result = -EOPNOTSUPP;
+
+	hose = pci_bus_to_hose(bus);
+	if (!hose)
+		return -ENODEV;
+
+	switch (which) {
+	case IOBASE_BRIDGE_NUMBER:
+		return (long)hose->first_busno;
+	case IOBASE_MEMORY:
+		return (long)hose->pci_mem_offset;
+	case IOBASE_IO:
+		return (long)hose->io_base_phys;
+	case IOBASE_ISA_IO:
+		return (long)isa_io_base;
+	case IOBASE_ISA_MEM:
+		return (long)isa_mem_base;
+	}
+
+	return result;
+}
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
new file mode 100644
index 0000000..7869a41
--- /dev/null
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -0,0 +1,168 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS  0x114
+
+#define PCI_HOST_ENABLE_CMD (PCI_COMMAND_SERR | PCI_COMMAND_PARITY | \
+				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY)
+
+static struct of_device_id xilinx_pci_match[] = {
+	{ .compatible = "xlnx,plbv46-pci-1.03.a", },
+	{}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	int i;
+
+	if (dev->devfn || dev->bus->self)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose)
+		return;
+
+	if (!of_match_node(xilinx_pci_match, hose->dn))
+		return;
+
+	/* Hide the PCI host BARs from the kernel as their content doesn't
+	 * fit well in the resource management
+	 */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+		 pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+#ifdef DEBUG
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack.  Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+	return (bus != 0);
+}
+
+/**
+ * xilinx_early_pci_scan - List pci config space for available devices
+ *
+ * List pci devices in very early phase.
+ */
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+	u32 bus = 0;
+	u32 val, dev, func, offset;
+
+	/* Currently we have only 2 device connected - up-to 32 devices */
+	for (dev = 0; dev < 2; dev++) {
+		/* List only first function number - up-to 8 functions */
+		for (func = 0; func < 1; func++) {
+			printk(KERN_INFO "%02x:%02x:%02x", bus, dev, func);
+			/* read the first 64 standardized bytes */
+			/* Up-to 192 bytes can be list of capabilities */
+			for (offset = 0; offset < 64; offset += 4) {
+				early_read_config_dword(hose, bus,
+					PCI_DEVFN(dev, func), offset, &val);
+				if (offset == 0 && val == 0xFFFFFFFF) {
+					printk(KERN_CONT "\nABSENT");
+					break;
+				}
+				if (!(offset % 0x10))
+					printk(KERN_CONT "\n%04x:    ", offset);
+
+				printk(KERN_CONT "%08x  ", val);
+			}
+			printk(KERN_INFO "\n");
+		}
+	}
+}
+#else
+void __init xilinx_early_pci_scan(struct pci_controller *hose)
+{
+}
+#endif
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+	struct pci_controller *hose;
+	struct resource r;
+	void __iomem *pci_reg;
+	struct device_node *pci_node;
+
+	pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+	if (!pci_node)
+		return;
+
+	if (of_address_to_resource(pci_node, 0, &r)) {
+		pr_err("xilinx-pci: cannot resolve base address\n");
+		return;
+	}
+
+	hose = pcibios_alloc_controller(pci_node);
+	if (!hose) {
+		pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+		return;
+	}
+
+	/* Setup config space */
+	setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+			   r.start + XPLB_PCI_DATA,
+			   INDIRECT_TYPE_SET_CFG_TYPE);
+
+	/* According to the xilinx plbv46_pci documentation the soft-core starts
+	 * a self-init when the bus master enable bit is set. Without this bit
+	 * set the pci bus can't be scanned.
+	 */
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+	/* Set the max latency timer to 255 */
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+	/* Set the max bus number to 255, and bus/subbus no's to 0 */
+	pci_reg = of_iomap(pci_node, 0);
+	out_be32(pci_reg + XPLB_PCI_BUS, 0x000000ff);
+	iounmap(pci_reg);
+
+	/* Register the host bridge with the linux kernel! */
+	pci_process_bridge_OF_ranges(hose, pci_node,
+					INDIRECT_TYPE_SET_CFG_TYPE);
+
+	pr_info("xilinx-pci: Registered PCI host bridge\n");
+	xilinx_early_pci_scan(hose);
+}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8b5d174..cdaae94 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -41,7 +41,7 @@ config AR7
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT_UART16550
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GCD
 	select VLYNQ
 	help
@@ -49,7 +49,7 @@ config AR7
 	  family: TNETD7100, 7200 and 7300.
 
 config BCM47XX
-	bool "BCM47XX based boards"
+	bool "Broadcom BCM47XX based boards"
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -180,7 +180,7 @@ config LASAT
 
 config MACH_LOONGSON
 	bool "Loongson family of machines"
-	select SYS_SUPPORTS_ZBOOT_UART16550
+	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables the support of Loongson family of machines.
 
@@ -509,6 +509,7 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -812,9 +814,9 @@ config DMA_COHERENT
 
 config DMA_NONCOHERENT
 	bool
-	select DMA_NEED_PCI_MAP_STATE
+	select NEED_DMA_MAP_STATE
 
-config DMA_NEED_PCI_MAP_STATE
+config NEED_DMA_MAP_STATE
 	bool
 
 config SYS_HAS_EARLY_PRINTK
@@ -1073,6 +1075,8 @@ config CPU_LOONGSON2F
 	bool "Loongson 2F"
 	depends on SYS_HAS_CPU_LOONGSON2F
 	select CPU_LOONGSON2
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  The Loongson 2F processor implements the MIPS III instruction set
 	  with many extensions.
@@ -1295,7 +1299,6 @@ config CPU_CAVIUM_OCTEON
 	select SYS_SUPPORTS_SMP
 	select NR_CPUS_DEFAULT_16
 	select WEAK_ORDERING
-	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
 	help
@@ -1306,6 +1309,33 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
+if CPU_LOONGSON2F
+config CPU_NOP_WORKAROUNDS
+	bool
+
+config CPU_JUMP_WORKAROUNDS
+	bool
+
+config CPU_LOONGSON2F_WORKAROUNDS
+	bool "Loongson 2F Workarounds"
+	default y
+	select CPU_NOP_WORKAROUNDS
+	select CPU_JUMP_WORKAROUNDS
+	help
+	  Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
+	  require workarounds.  Without workarounds the system may hang
+	  unexpectedly.  For more information please refer to the gas
+	  -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
+
+	  Loongson 2F03 and later have fixed these issues and no workarounds
+	  are needed.  The workarounds have no significant side effect on them
+	  but may decrease the performance of the system so this option should
+	  be disabled unless the kernel is intended to be run on 2F01 or 2F02
+	  systems.
+
+	  If unsure, please say Y.
+endif # CPU_LOONGSON2F
+
 config SYS_SUPPORTS_ZBOOT
 	bool
 	select HAVE_KERNEL_GZIP
@@ -1726,6 +1756,9 @@ config SB1_PASS_2_1_WORKAROUNDS
 config 64BIT_PHYS_ADDR
 	bool
 
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool 64BIT_PHYS_ADDR
+
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
 	bool "Support for the SmartMIPS ASE"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index d2b88a0..43dc279 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -102,4 +102,30 @@ config RUNTIME_DEBUG
 	  arch/mips/include/asm/debug.h for debugging macros.
 	  If unsure, say N.
 
+config DEBUG_ZBOOT
+	bool "Enable compressed kernel support debugging"
+	depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT
+	default n
+	help
+	  If you want to add compressed kernel support to a new board, and the
+	  board supports uart16550 compatible serial port, please select
+	  SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to
+	  debug it.
+
+	  If your board doesn't support uart16550 compatible serial port, you
+	  can try to select SYS_SUPPORTS_ZBOOT and use the other methods to
+	  debug it. for example, add a new serial port support just as
+	  arch/mips/boot/compressed/uart-16550.c does.
+
+	  After the compressed kernel support works, please disable this option
+	  to reduce the kernel image size and speed up the booting procedure a
+	  little.
+
+config SPINLOCK_TEST
+	bool "Enable spinlock timing tests in debugfs"
+	depends on DEBUG_FS
+	default n
+	help
+	  Add several files to the debugfs to test spinlock speed.
+
 endmenu
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a77dcf3..f7139b2 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -137,6 +137,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
 cflags-$(CONFIG_CPU_LOONGSON2F) += \
 	$(call cc-option,-march=loongson2f,-march=r4600)
+# enable the workarounds for loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+  else
+    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+  endif
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+  else
+    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+  endif
+endif
 
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
@@ -187,6 +200,15 @@ libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
 libs-y				+= arch/mips/fw/lib/
 
 #
+# Kernel compression
+#
+ifdef SYS_SUPPORTS_ZBOOT
+COMPRESSION_FNAME		= vmlinuz
+else
+COMPRESSION_FNAME		= vmlinux
+endif
+
+#
 # Board-dependent options and extra files
 #
 
@@ -334,11 +356,11 @@ load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 #
 # Loongson family
 #
-core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/
 cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
                     -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
 
 #
 # MIPS Malta board
@@ -346,7 +368,7 @@ load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
 cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= vmlinuz.bin
+all-$(CONFIG_MIPS_MALTA)	:= $(COMPRESSION_FNAME).bin
 
 #
 # MIPS SIM
@@ -596,7 +618,7 @@ load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
 else
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
 endif
-all-$(CONFIG_SNI_RM)		:= vmlinuz.ecoff
+all-$(CONFIG_SNI_RM)		:= $(COMPRESSION_FNAME).ecoff
 
 #
 # Common TXx9
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 00b498e..df3b1a7 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -1,5 +1,5 @@
-# au1000-style gpio
-config ALCHEMY_GPIO_AU1000
+# au1000-style gpio and interrupt controllers
+config ALCHEMY_GPIOINT_AU1000
 	bool
 
 # select this in your board config if you don't want to use the gpio
@@ -20,12 +20,14 @@ config MIPS_MTX1
 	select HW_HAS_PCI
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_BOSPORUS
 	bool "Alchemy Bosporus board"
 	select SOC_AU1500
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1000
 	bool "Alchemy DB1000 board"
@@ -33,12 +35,14 @@ config MIPS_DB1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1100
 	bool "Alchemy DB1100 board"
 	select SOC_AU1100
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
 	bool "Alchemy DB1200 board"
@@ -46,6 +50,7 @@ config MIPS_DB1200
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1500
 	bool "Alchemy DB1500 board"
@@ -55,6 +60,7 @@ config MIPS_DB1500
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1550
 	bool "Alchemy DB1550 board"
@@ -63,12 +69,14 @@ config MIPS_DB1550
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_MIRAGE
 	bool "Alchemy Mirage board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1000
 	bool "Alchemy PB1000 board"
@@ -77,6 +85,7 @@ config MIPS_PB1000
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
@@ -85,6 +94,7 @@ config MIPS_PB1100
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1200
 	bool "Alchemy PB1200 board"
@@ -92,6 +102,7 @@ config MIPS_PB1200
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
@@ -99,6 +110,7 @@ config MIPS_PB1500
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1550
 	bool "Alchemy PB1550 board"
@@ -107,39 +119,41 @@ config MIPS_PB1550
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 endchoice
 
 config SOC_AU1000
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1100
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1500
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1550
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1200
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1X00
 	bool
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index b67fb51..06c0e65 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -5,14 +5,15 @@
 # Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
-obj-y += prom.o irq.o puts.o time.o reset.o \
-	clocks.o platform.o power.o setup.o \
+obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
 	sleeper.o dma.o dbdma.o
 
+obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
  ifeq ($(CONFIG_GPIOLIB),y)
-  obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
+  obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
  endif
 endif
 
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index d899185..460c628 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -40,8 +40,6 @@
 static unsigned int au1x00_clock; /*  Hz */
 static unsigned long uart_baud_base;
 
-static DEFINE_SPINLOCK(time_lock);
-
 /*
  * Set the au1000_clock
  */
@@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 unsigned long au1xxx_calc_clock(void)
 {
 	unsigned long cpu_speed;
-	unsigned long flags;
-
-	spin_lock_irqsave(&time_lock, flags);
 
 	/*
 	 * On early Au1000, sys_cpupll was write-only. Since these
@@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
 							  & 0x03) + 2) * 16));
 
-	spin_unlock_irqrestore(&time_lock, flags);
-
 	set_au1x00_speed(cpu_speed);
 
 	return cpu_speed;
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 5c68569..ca0506a 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -30,11 +30,13 @@
  *
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/sysdev.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
@@ -58,7 +60,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 
 static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
 static int dbdma_initialized;
-static void au1xxx_dbdma_init(void);
 
 static dbdev_tab_t dbdev_tab[] = {
 #ifdef CONFIG_SOC_AU1550
@@ -174,10 +175,6 @@ static dbdev_tab_t dbdev_tab[] = {
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
-#ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
-#endif
-
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
@@ -237,7 +234,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
 	unsigned long   flags;
-	u32		used, chan, rv;
+	u32		used, chan;
 	u32		dcp;
 	int		i;
 	dbdev_tab_t	*stp, *dtp;
@@ -250,8 +247,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	 * which can't be done successfully during board set up.
 	 */
 	if (!dbdma_initialized)
-		au1xxx_dbdma_init();
-	dbdma_initialized = 1;
+		return 0;
 
 	stp = find_dbdev_id(srcid);
 	if (stp == NULL)
@@ -261,7 +257,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		return 0;
 
 	used = 0;
-	rv = 0;
 
 	/* Check to see if we can get both channels. */
 	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
@@ -282,63 +277,65 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		used++;
 	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
 
-	if (!used) {
-		/* Let's see if we can allocate a channel for it. */
-		ctp = NULL;
-		chan = 0;
-		spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
-		for (i = 0; i < NUM_DBDMA_CHANS; i++)
-			if (chan_tab_ptr[i] == NULL) {
-				/*
-				 * If kmalloc fails, it is caught below same
-				 * as a channel not available.
-				 */
-				ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
-				chan_tab_ptr[i] = ctp;
-				break;
-			}
-		spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
-
-		if (ctp != NULL) {
-			memset(ctp, 0, sizeof(chan_tab_t));
-			ctp->chan_index = chan = i;
-			dcp = DDMA_CHANNEL_BASE;
-			dcp += (0x0100 * chan);
-			ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
-			cp = (au1x_dma_chan_t *)dcp;
-			ctp->chan_src = stp;
-			ctp->chan_dest = dtp;
-			ctp->chan_callback = callback;
-			ctp->chan_callparam = callparam;
-
-			/* Initialize channel configuration. */
-			i = 0;
-			if (stp->dev_intlevel)
-				i |= DDMA_CFG_SED;
-			if (stp->dev_intpolarity)
-				i |= DDMA_CFG_SP;
-			if (dtp->dev_intlevel)
-				i |= DDMA_CFG_DED;
-			if (dtp->dev_intpolarity)
-				i |= DDMA_CFG_DP;
-			if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
-				(dtp->dev_flags & DEV_FLAGS_SYNC))
-					i |= DDMA_CFG_SYNC;
-			cp->ddma_cfg = i;
-			au_sync();
+	if (used)
+		return 0;
 
-			/* Return a non-zero value that can be used to
-			 * find the channel information in subsequent
-			 * operations.
+	/* Let's see if we can allocate a channel for it. */
+	ctp = NULL;
+	chan = 0;
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	for (i = 0; i < NUM_DBDMA_CHANS; i++)
+		if (chan_tab_ptr[i] == NULL) {
+			/*
+			 * If kmalloc fails, it is caught below same
+			 * as a channel not available.
 			 */
-			rv = (u32)(&chan_tab_ptr[chan]);
-		} else {
-			/* Release devices */
-			stp->dev_flags &= ~DEV_FLAGS_INUSE;
-			dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+			ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
+			chan_tab_ptr[i] = ctp;
+			break;
 		}
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (ctp != NULL) {
+		memset(ctp, 0, sizeof(chan_tab_t));
+		ctp->chan_index = chan = i;
+		dcp = DDMA_CHANNEL_BASE;
+		dcp += (0x0100 * chan);
+		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+		cp = (au1x_dma_chan_t *)dcp;
+		ctp->chan_src = stp;
+		ctp->chan_dest = dtp;
+		ctp->chan_callback = callback;
+		ctp->chan_callparam = callparam;
+
+		/* Initialize channel configuration. */
+		i = 0;
+		if (stp->dev_intlevel)
+			i |= DDMA_CFG_SED;
+		if (stp->dev_intpolarity)
+			i |= DDMA_CFG_SP;
+		if (dtp->dev_intlevel)
+			i |= DDMA_CFG_DED;
+		if (dtp->dev_intpolarity)
+			i |= DDMA_CFG_DP;
+		if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+			(dtp->dev_flags & DEV_FLAGS_SYNC))
+				i |= DDMA_CFG_SYNC;
+		cp->ddma_cfg = i;
+		au_sync();
+
+		/*
+		 * Return a non-zero value that can be used to find the channel
+		 * information in subsequent operations.
+		 */
+		return (u32)(&chan_tab_ptr[chan]);
 	}
-	return rv;
+
+	/* Release devices */
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+	return 0;
 }
 EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
 
@@ -412,8 +409,11 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		if (desc_base == 0)
 			return 0;
 
+		ctp->cdb_membase = desc_base;
 		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
-	}
+	} else
+		ctp->cdb_membase = desc_base;
+
 	dp = (au1x_ddma_desc_t *)desc_base;
 
 	/* Keep track of the base descriptor. */
@@ -569,7 +569,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
  * This updates the source pointer and byte count.  Normally used
  * for memory to fifo transfers.
  */
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -595,7 +595,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 		return 0;
 
 	/* Load up buffer address and byte count. */
-	dp->dscr_source0 = virt_to_phys(buf);
+	dp->dscr_source0 = buf & ~0UL;
 	dp->dscr_cmd1 = nbytes;
 	/* Check flags */
 	if (flags & DDMA_FLAGS_IE)
@@ -622,14 +622,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 	/* Return something non-zero. */
 	return nbytes;
 }
-EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
 
 /* Put a destination buffer into the DMA ring.
  * This updates the destination pointer and byte count.  Normally used
  * to place an empty buffer into the ring for fifo to memory transfers.
  */
-u32
-_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -659,7 +658,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	if (flags & DDMA_FLAGS_NOIE)
 		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 
-	dp->dscr_dest0 = virt_to_phys(buf);
+	dp->dscr_dest0 = buf & ~0UL;
 	dp->dscr_cmd1 = nbytes;
 #if 0
 	printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
@@ -685,7 +684,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	/* Return something non-zero. */
 	return nbytes;
 }
-EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
 
 /*
  * Get a destination buffer into the DMA ring.
@@ -831,7 +830,7 @@ void au1xxx_dbdma_chan_free(u32 chanid)
 
 	au1xxx_dbdma_stop(chanid);
 
-	kfree((void *)ctp->chan_desc_base);
+	kfree((void *)ctp->cdb_membase);
 
 	stp->dev_flags &= ~DEV_FLAGS_INUSE;
 	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -868,28 +867,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
 	return IRQ_RETVAL(1);
 }
 
-static void au1xxx_dbdma_init(void)
-{
-	int irq_nr;
-
-	dbdma_gptr->ddma_config = 0;
-	dbdma_gptr->ddma_throttle = 0;
-	dbdma_gptr->ddma_inten = 0xffff;
-	au_sync();
-
-#if defined(CONFIG_SOC_AU1550)
-	irq_nr = AU1550_DDMA_INT;
-#elif defined(CONFIG_SOC_AU1200)
-	irq_nr = AU1200_DDMA_INT;
-#else
-	#error Unknown Au1x00 SOC
-#endif
-
-	if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
-			"Au1xxx dbdma", (void *)dbdma_gptr))
-		printk(KERN_ERR "Can't get 1550 dbdma irq");
-}
-
 void au1xxx_dbdma_dump(u32 chanid)
 {
 	chan_tab_t	 *ctp;
@@ -903,7 +880,7 @@ void au1xxx_dbdma_dump(u32 chanid)
 	dtp = ctp->chan_dest;
 	cp = ctp->chan_ptr;
 
-	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d) \n",
+	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d)\n",
 			  (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
 			  dtp - dbdev_tab);
 	printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
@@ -980,29 +957,37 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	return nbytes;
 }
 
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void)
+
+struct alchemy_dbdma_sysdev {
+	struct sys_device sysdev;
+	u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
+};
+
+static int alchemy_dbdma_suspend(struct sys_device *dev,
+				 pm_message_t state)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
-	au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
-	au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
-	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+	sdev->pm_regs[0][0] = au_readl(addr + 0x00);
+	sdev->pm_regs[0][1] = au_readl(addr + 0x04);
+	sdev->pm_regs[0][2] = au_readl(addr + 0x08);
+	sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
-		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
-		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
-		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
-		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
-		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+		sdev->pm_regs[i][0] = au_readl(addr + 0x00);
+		sdev->pm_regs[i][1] = au_readl(addr + 0x04);
+		sdev->pm_regs[i][2] = au_readl(addr + 0x08);
+		sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
+		sdev->pm_regs[i][4] = au_readl(addr + 0x10);
+		sdev->pm_regs[i][5] = au_readl(addr + 0x14);
 
 		/* halt channel */
-		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+		au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
 		au_sync();
 		while (!(au_readl(addr + 0x14) & 1))
 			au_sync();
@@ -1012,30 +997,102 @@ void au1xxx_dbdma_suspend(void)
 	/* disable channel interrupts */
 	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
 	au_sync();
+
+	return 0;
 }
 
-void au1xxx_dbdma_resume(void)
+static int alchemy_dbdma_resume(struct sys_device *dev)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
-	au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
-	au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
-	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+	au_writel(sdev->pm_regs[0][0], addr + 0x00);
+	au_writel(sdev->pm_regs[0][1], addr + 0x04);
+	au_writel(sdev->pm_regs[0][2], addr + 0x08);
+	au_writel(sdev->pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
-		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
-		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
-		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
-		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
-		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+		au_writel(sdev->pm_regs[i][0], addr + 0x00);
+		au_writel(sdev->pm_regs[i][1], addr + 0x04);
+		au_writel(sdev->pm_regs[i][2], addr + 0x08);
+		au_writel(sdev->pm_regs[i][3], addr + 0x0c);
+		au_writel(sdev->pm_regs[i][4], addr + 0x10);
+		au_writel(sdev->pm_regs[i][5], addr + 0x14);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_dbdma_sysdev_class = {
+	.name		= "dbdma",
+	.suspend	= alchemy_dbdma_suspend,
+	.resume		= alchemy_dbdma_resume,
+};
+
+static int __init alchemy_dbdma_sysdev_init(void)
+{
+	struct alchemy_dbdma_sysdev *sdev;
+	int ret;
+
+	ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
+	if (ret)
+		return ret;
+
+	sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->sysdev.id = -1;
+	sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
+	ret = sysdev_register(&sdev->sysdev);
+	if (ret)
+		kfree(sdev);
+
+	return ret;
+}
+
+static int __init au1xxx_dbdma_init(void)
+{
+	int irq_nr, ret;
+
+	dbdma_gptr->ddma_config = 0;
+	dbdma_gptr->ddma_throttle = 0;
+	dbdma_gptr->ddma_inten = 0xffff;
+	au_sync();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		irq_nr = AU1550_DDMA_INT;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		irq_nr = AU1200_DDMA_INT;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
+			"Au1xxx dbdma", (void *)dbdma_gptr);
+	if (ret)
+		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+	else {
+		dbdma_initialized = 1;
+		printk(KERN_INFO "Alchemy DBDMA initialized\n");
+		ret = alchemy_dbdma_sysdev_init();
+		if (ret) {
+			printk(KERN_ERR "DBDMA PM init failed\n");
+			ret = 0;
+		}
+	}
+
+	return ret;
 }
-#endif	/* CONFIG_PM */
+subsys_initcall(au1xxx_dbdma_init);
+
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index d6fbda2..d527887 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -29,6 +29,8 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
+
+#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 		dev = &dma_dev_table[dev_id];
 
 	if (irqhandler) {
-		chan->irq = AU1000_DMA_INT_BASE + i;
 		chan->irq_dev = irq_dev_id;
 		ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
 				  chan->irq_dev);
 		if (ret) {
-			chan->irq = 0;
 			chan->irq_dev = NULL;
 			return ret;
 		}
 	} else {
-		chan->irq = 0;
 		chan->irq_dev = NULL;
 	}
 
@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
 	}
 
 	disable_dma(dmanr);
-	if (chan->irq)
+	if (chan->irq_dev)
 		free_irq(chan->irq, chan->irq_dev);
 
-	chan->irq = 0;
 	chan->irq_dev = NULL;
 	chan->dev_id = -1;
 }
 EXPORT_SYMBOL(free_au1000_dma);
 
+static int __init au1000_dma_init(void)
+{
+        int base, i;
+
+        switch (alchemy_get_cputype()) {
+        case ALCHEMY_CPU_AU1000:
+                base = AU1000_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1500:
+                base = AU1500_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1100:
+                base = AU1100_DMA_INT_BASE;
+                break;
+        default:
+                goto out;
+        }
+
+        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+                au1000_dma_table[i].irq = base + i;
+
+        printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+        return 0;
+}
+arch_initcall(au1000_dma_init);
+
 #endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib-au1000.c
index 1bfa91f..c8e1a94 100644
--- a/arch/mips/alchemy/common/gpiolib-au1000.c
+++ b/arch/mips/alchemy/common/gpiolib-au1000.c
@@ -36,7 +36,6 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio.h>
 
-#if !defined(CONFIG_SOC_AU1000)
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
 	return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
@@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
 }
-#endif /* !defined(CONFIG_SOC_AU1000) */
+
 
 static int gpio1_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.base			= ALCHEMY_GPIO1_BASE,
 		.ngpio			= ALCHEMY_GPIO1_NUM,
 	},
-#if !defined(CONFIG_SOC_AU1000)
 	[1] = {
 		.label                  = "alchemy-gpio2",
 		.direction_input        = gpio2_direction_input,
@@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.base                   = ALCHEMY_GPIO2_BASE,
 		.ngpio                  = ALCHEMY_GPIO2_NUM,
 	},
-#endif
 };
 
 static int __init alchemy_gpiolib_init(void)
 {
 	gpiochip_add(&alchemy_gpio_chip[0]);
-#if !defined(CONFIG_SOC_AU1000)
-	gpiochip_add(&alchemy_gpio_chip[1]);
-#endif
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
+		gpiochip_add(&alchemy_gpio_chip[1]);
 
 	return 0;
 }
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index d670928..9f78ada 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -29,6 +29,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/sysdev.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -39,253 +41,181 @@
 
 static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
 
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+
 /* per-processor fixed function irqs */
-struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
-
-#if defined(CONFIG_SOC_AU1000)
-	{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
-	{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
-	{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+struct au1xxx_irqmap {
+	int im_irq;
+	int im_type;
+	int im_request;		/* set 1 to get higher priority */
+};
+
+struct au1xxx_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
 	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
-	{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
-	{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
 };
 
+struct au1xxx_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
+};
 
-#ifdef CONFIG_PM
+struct au1xxx_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
+};
 
-/*
- * Save/restore the interrupt controller state.
- * Called from the save/restore core registers as part of the
- * au_sleep function in power.c.....maybe I should just pm_register()
- * them instead?
- */
-static unsigned int	sleep_intctl_config0[2];
-static unsigned int	sleep_intctl_config1[2];
-static unsigned int	sleep_intctl_config2[2];
-static unsigned int	sleep_intctl_src[2];
-static unsigned int	sleep_intctl_assign[2];
-static unsigned int	sleep_intctl_wake[2];
-static unsigned int	sleep_intctl_mask[2];
-
-void save_au1xxx_intctl(void)
-{
-	sleep_intctl_config0[0] = au_readl(IC0_CFG0RD);
-	sleep_intctl_config1[0] = au_readl(IC0_CFG1RD);
-	sleep_intctl_config2[0] = au_readl(IC0_CFG2RD);
-	sleep_intctl_src[0] = au_readl(IC0_SRCRD);
-	sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD);
-	sleep_intctl_wake[0] = au_readl(IC0_WAKERD);
-	sleep_intctl_mask[0] = au_readl(IC0_MASKRD);
-
-	sleep_intctl_config0[1] = au_readl(IC1_CFG0RD);
-	sleep_intctl_config1[1] = au_readl(IC1_CFG1RD);
-	sleep_intctl_config2[1] = au_readl(IC1_CFG2RD);
-	sleep_intctl_src[1] = au_readl(IC1_SRCRD);
-	sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD);
-	sleep_intctl_wake[1] = au_readl(IC1_WAKERD);
-	sleep_intctl_mask[1] = au_readl(IC1_MASKRD);
-}
+struct au1xxx_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ -1, },
+};
 
-/*
- * For most restore operations, we clear the entire register and
- * then set the bits we found during the save.
- */
-void restore_au1xxx_intctl(void)
-{
-	au_writel(0xffffffff, IC0_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC0_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC0_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync();
-	au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC0_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync();
-	au_writel(0xffffffff, IC0_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC0_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC0_TESTBIT); au_sync();
-
-	au_writel(0xffffffff, IC1_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC1_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC1_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync();
-	au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC1_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync();
-	au_writel(0xffffffff, IC1_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC1_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC1_TESTBIT); au_sync();
-
-	au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync();
-
-	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
-}
-#endif /* CONFIG_PM */
+struct au1xxx_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ -1, },
+};
 
 
 static void au1x_ic0_unmask(unsigned int irq_nr)
@@ -306,7 +236,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr)
  * nowhere in the current kernel sources is it disabled.	--mlau
  */
 #if defined(CONFIG_MIPS_PB1000)
-	if (irq_nr == AU1000_GPIO_15)
+	if (irq_nr == AU1000_GPIO15_INT)
 		au_writel(0x4000, PB1000_MDR); /* enable int */
 #endif
 	au_sync();
@@ -378,11 +308,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr)
 
 static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
 {
-	unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+	int bit = irq - AU1000_INTC1_INT_BASE;
 	unsigned long wakemsk, flags;
 
-	/* only GPIO 0-7 can act as wakeup source: */
-	if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+	/* only GPIO 0-7 can act as wakeup source.  Fortunately these
+	 * are wired up identically on all supported variants.
+	 */
+	if ((bit < 0) || (bit > 7))
 		return -EINVAL;
 
 	local_irq_save(flags);
@@ -504,11 +436,11 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned int pending = read_c0_status() & read_c0_cause();
-	unsigned long s, off, bit;
+	unsigned long s, off;
 
 	if (pending & CAUSEF_IP7) {
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-		return;
+		off = MIPS_CPU_IRQ_BASE + 7;
+		goto handle;
 	} else if (pending & CAUSEF_IP2) {
 		s = IC0_REQ0INT;
 		off = AU1000_INTC0_INT_BASE;
@@ -524,58 +456,20 @@ asmlinkage void plat_irq_dispatch(void)
 	} else
 		goto spurious;
 
-	bit = 0;
 	s = au_readl(s);
 	if (unlikely(!s)) {
 spurious:
 		spurious_interrupt();
 		return;
 	}
-#ifdef AU1000_USB_DEV_REQ_INT
-	/*
-	 * Because of the tight timing of SETUP token to reply
-	 * transactions, the USB devices-side packet complete
-	 * interrupt needs the highest priority.
-	 */
-	bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
-	if ((pending & CAUSEF_IP2) && (s & bit)) {
-		do_IRQ(AU1000_USB_DEV_REQ_INT);
-		return;
-	}
-#endif
-	do_IRQ(__ffs(s) + off);
+	off += __ffs(s);
+handle:
+	do_IRQ(off);
 }
 
-/* setup edge/level and assign request 0/1 */
-void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
+static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 {
 	unsigned int bit, irq_nr;
-
-	while (count--) {
-		irq_nr = map[count].im_irq;
-
-		if (((irq_nr < AU1000_INTC0_INT_BASE) ||
-		     (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
-		    ((irq_nr < AU1000_INTC1_INT_BASE) ||
-		     (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
-			continue;
-
-		if (irq_nr >= AU1000_INTC1_INT_BASE) {
-			bit = irq_nr - AU1000_INTC1_INT_BASE;
-			if (map[count].im_request)
-				au_writel(1 << bit, IC1_ASSIGNCLR);
-		} else {
-			bit = irq_nr - AU1000_INTC0_INT_BASE;
-			if (map[count].im_request)
-				au_writel(1 << bit, IC0_ASSIGNCLR);
-		}
-
-		au1x_ic_settype(irq_nr, map[count].im_type);
-	}
-}
-
-void __init arch_init_irq(void)
-{
 	int i;
 
 	/*
@@ -585,7 +479,7 @@ void __init arch_init_irq(void)
 	au_writel(0xffffffff, IC0_CFG1CLR);
 	au_writel(0xffffffff, IC0_CFG2CLR);
 	au_writel(0xffffffff, IC0_MASKCLR);
-	au_writel(0xffffffff, IC0_ASSIGNSET);
+	au_writel(0xffffffff, IC0_ASSIGNCLR);
 	au_writel(0xffffffff, IC0_WAKECLR);
 	au_writel(0xffffffff, IC0_SRCSET);
 	au_writel(0xffffffff, IC0_FALLINGCLR);
@@ -596,7 +490,7 @@ void __init arch_init_irq(void)
 	au_writel(0xffffffff, IC1_CFG1CLR);
 	au_writel(0xffffffff, IC1_CFG2CLR);
 	au_writel(0xffffffff, IC1_MASKCLR);
-	au_writel(0xffffffff, IC1_ASSIGNSET);
+	au_writel(0xffffffff, IC1_ASSIGNCLR);
 	au_writel(0xffffffff, IC1_WAKECLR);
 	au_writel(0xffffffff, IC1_SRCSET);
 	au_writel(0xffffffff, IC1_FALLINGCLR);
@@ -619,11 +513,131 @@ void __init arch_init_irq(void)
 	/*
 	 * Initialize IC0, which is fixed per processor.
 	 */
-	au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
+	while (map->im_irq != -1) {
+		irq_nr = map->im_irq;
 
-	/* Boards can register additional (GPIO-based) IRQs.
-	*/
-	board_init_irq();
+		if (irq_nr >= AU1000_INTC1_INT_BASE) {
+			bit = irq_nr - AU1000_INTC1_INT_BASE;
+			if (map->im_request)
+				au_writel(1 << bit, IC1_ASSIGNSET);
+		} else {
+			bit = irq_nr - AU1000_INTC0_INT_BASE;
+			if (map->im_request)
+				au_writel(1 << bit, IC0_ASSIGNSET);
+		}
+
+		au1x_ic_settype(irq_nr, map->im_type);
+		++map;
+	}
 
 	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
 }
+
+void __init arch_init_irq(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		au1000_init_irq(au1000_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1500:
+		au1000_init_irq(au1500_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1100:
+		au1000_init_irq(au1100_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_init_irq(au1550_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1000_init_irq(au1200_irqmap);
+		break;
+	}
+}
+
+struct alchemy_ic_sysdev {
+	struct sys_device sysdev;
+	void __iomem *base;
+	unsigned long pmdata[7];
+};
+
+static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
+	icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
+	icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
+	icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
+	icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
+	icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
+	icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
+
+	return 0;
+}
+
+static int alchemy_ic_resume(struct sys_device *dev)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
+	__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
+	__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
+	wmb();
+	__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
+	__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
+	__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
+	__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
+	__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
+	__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+	wmb();
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_ic_sysdev_class = {
+	.name		= "ic",
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static int __init alchemy_ic_sysdev_init(void)
+{
+	struct alchemy_ic_sysdev *icdev;
+	unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+	int err, i;
+
+	err = sysdev_class_register(&alchemy_ic_sysdev_class);
+	if (err)
+		return err;
+
+	for (i = 0; i < 2; i++) {
+		icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
+		if (!icdev)
+			return -ENOMEM;
+
+		icdev->base = ioremap(icbase[i], 0x1000);
+
+		icdev->sysdev.id = i;
+		icdev->sysdev.cls = &alchemy_ic_sysdev_class;
+		err = sysdev_register(&icdev->sysdev);
+		if (err) {
+			kfree(icdev);
+			return err;
+		}
+	}
+
+	return 0;
+}
+device_initcall(alchemy_ic_sysdev_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 117f99f..f9e5622 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -19,39 +19,40 @@
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
-
-#define PORT(_base, _irq)				\
-	{						\
-		.iobase		= _base,		\
-		.membase	= (void __iomem *)_base,\
-		.mapbase	= CPHYSADDR(_base),	\
-		.irq		= _irq,			\
-		.regshift	= 2,			\
-		.iotype		= UPIO_AU,		\
-		.flags		= UPF_SKIP_TEST 	\
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#define PORT(_base, _irq)					\
+	{							\
+		.mapbase	= _base,			\
+		.irq		= _irq,				\
+		.regshift	= 2,				\
+		.iotype		= UPIO_AU,			\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
+				  UPF_FIXED_TYPE,		\
+		.type		= PORT_16550A,			\
 	}
 
 static struct plat_serial8250_port au1x00_uart_data[] = {
 #if defined(CONFIG_SERIAL_8250_AU1X00)
 #if defined(CONFIG_SOC_AU1000)
-	PORT(UART0_ADDR, AU1000_UART0_INT),
-	PORT(UART1_ADDR, AU1000_UART1_INT),
-	PORT(UART2_ADDR, AU1000_UART2_INT),
-	PORT(UART3_ADDR, AU1000_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
+	PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
+	PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
 #elif defined(CONFIG_SOC_AU1500)
-	PORT(UART0_ADDR, AU1500_UART0_INT),
-	PORT(UART3_ADDR, AU1500_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
+	PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
 #elif defined(CONFIG_SOC_AU1100)
-	PORT(UART0_ADDR, AU1100_UART0_INT),
-	PORT(UART1_ADDR, AU1100_UART1_INT),
-	PORT(UART3_ADDR, AU1100_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
+	PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
 #elif defined(CONFIG_SOC_AU1550)
-	PORT(UART0_ADDR, AU1550_UART0_INT),
-	PORT(UART1_ADDR, AU1550_UART1_INT),
-	PORT(UART3_ADDR, AU1550_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
+	PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
 #elif defined(CONFIG_SOC_AU1200)
-	PORT(UART0_ADDR, AU1200_UART0_INT),
-	PORT(UART1_ADDR, AU1200_UART1_INT),
+	PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
 #endif
 #endif	/* CONFIG_SERIAL_8250_AU1X00 */
 	{ },
@@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= FOR_PLATFORM_C_USB_HOST_INT,
+		.end		= FOR_PLATFORM_C_USB_HOST_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = {
 #endif /* #ifndef CONFIG_MIPS_DB1200 */
 #endif /* #ifdef CONFIG_SOC_AU1200 */
 
-static struct platform_device au1x00_pcmcia_device = {
-	.name 		= "au1x00-pcmcia",
-	.id 		= 0,
-};
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = {
 };
 #endif
 
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq)			\
+	{						\
+		.start	= CPHYSADDR(_base),		\
+		.end	= CPHYSADDR(_base + 0xffff),	\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= CPHYSADDR(_enable),		\
+		.end	= CPHYSADDR(_enable + 0x3),	\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _irq,				\
+		.end	= _irq,				\
+		.flags	= IORESOURCE_IRQ		\
+	}
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+	MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+	MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+	.name		= "au1000-eth",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(au1xxx_eth0_resources),
+	.resource	= au1xxx_eth0_resources,
+	.dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+	MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+	.name		= "au1000-eth",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(au1xxx_eth1_resources),
+	.resource	= au1xxx_eth1_resources,
+	.dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+			struct au1000_eth_platform_data *eth_data)
+{
+	if (!eth_data || port > 1)
+		return;
+
+	if (port == 0)
+		memcpy(&au1xxx_eth0_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+	else
+		memcpy(&au1xxx_eth1_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
-	&au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
 	&au1100_lcd_device,
 #endif
@@ -351,19 +429,27 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif
+	&au1xxx_eth0_device,
 };
 
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int i;
+	int err, i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
-	return platform_add_devices(au1xxx_platform_devices,
-				    ARRAY_SIZE(au1xxx_platform_devices));
+	err = platform_add_devices(au1xxx_platform_devices,
+				   ARRAY_SIZE(au1xxx_platform_devices));
+#ifndef CONFIG_SOC_AU1100
+	/* Register second MAC if enabled in pinfunc */
+	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+		platform_device_register(&au1xxx_eth1_device);
+#endif
+
+	return err;
 }
 
 arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 6ab7b42..5ef06a1 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -36,9 +36,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#endif
 
 #ifdef CONFIG_PM
 
@@ -106,9 +103,6 @@ static void save_core_regs(void)
 	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
 #endif
 
-	/* Save interrupt controller state. */
-	save_au1xxx_intctl();
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -132,10 +126,6 @@ static void save_core_regs(void)
 	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
 	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
 	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_suspend();
-#endif
 }
 
 static void restore_core_regs(void)
@@ -199,19 +189,19 @@ static void restore_core_regs(void)
 		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
 		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
 	}
-
-	restore_au1xxx_intctl();
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_resume();
-#endif
 }
 
 void au_sleep(void)
 {
-	save_core_regs();
-	au1xxx_save_and_sleep();
-	restore_core_regs();
+	int cpuid = alchemy_get_cputype();
+	if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+		save_core_regs();
+		if (cpuid <= ALCHEMY_CPU_AU1500)
+			alchemy_sleep_au1000();
+		else if (cpuid <= ALCHEMY_CPU_AU1200)
+			alchemy_sleep_au1550();
+		restore_core_regs();
+	}
 }
 
 #endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index 18b310b..c29511b 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -43,29 +43,15 @@ int prom_argc;
 char **prom_argv;
 char **prom_envp;
 
-char * __init_or_module prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
 void prom_init_cmdline(void)
 {
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
+	int i;
 
-	cp = &(arcs_cmdline[0]);
-	while (actr < prom_argc) {
-		strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
+	for (i = 1; i < prom_argc; i++) {
+		strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+		if (i < (prom_argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	if (prom_argc > 1)
-		*cp = '\0';
 }
 
 char *prom_getenv(char *envname)
@@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 int prom_get_ethernet_addr(char *ethernet_addr)
 {
 	char *ethaddr_str;
-	char *argptr;
 
 	/* Check the environment variables first */
 	ethaddr_str = prom_getenv("ethaddr");
 	if (!ethaddr_str) {
 		/* Check command line */
-		argptr = prom_getcmdline();
-		ethaddr_str = strstr(argptr, "ethaddr=");
+		ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
 		if (!ethaddr_str)
 			return -1;
 
diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c
deleted file mode 100644
index 55bbe24..0000000
--- a/arch/mips/alchemy/common/puts.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Low level UART routines to directly access Alchemy UART.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-#define SERIAL_BASE   UART_BASE
-#define SER_CMD       0x7
-#define SER_DATA      0x1
-#define TX_BUSY       0x20
-
-#define TIMEOUT       0xffffff
-#define SLOW_DOWN
-
-static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
-#ifdef SLOW_DOWN
-static inline void slow_down(void)
-{
-	int k;
-
-	for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void
-prom_putchar(const unsigned char c)
-{
-	unsigned char ch;
-	int i = 0;
-
-	do {
-		ch = com1[SER_CMD];
-		slow_down();
-		i++;
-		if (i > TIMEOUT)
-			break;
-	} while (0 == (ch & TX_BUSY));
-
-	com1[SER_DATA] = c;
-}
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
deleted file mode 100644
index 4791011..0000000
--- a/arch/mips/alchemy/common/reset.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach-au1x00/au1000.h>
-
-void au1000_restart(char *command)
-{
-	/* Set all integrated peripherals to disabled states */
-	extern void board_reset(void);
-	u32 prid = read_c0_prid();
-
-	printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
-	switch (prid & 0xFF000000) {
-	case 0x00000000: /* Au1000 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb0300040); /* ir_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb0520000); /* macen0 */
-		au_writel(0x00, 0xb0520004); /* macen1 */
-		au_writel(0x00, 0xb1000008); /* i2s_enable  */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1300100); /* uart2_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x02, 0xb1600100); /* ssi0_enable */
-		au_writel(0x02, 0xb1680100); /* ssi1_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x01000000: /* Au1500 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb1520000); /* macen0 */
-		au_writel(0x00, 0xb1520004); /* macen1 */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x02000000: /* Au1100 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb0300040); /* ir_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb0520000); /* macen0 */
-		au_writel(0x00, 0xb1000008); /* i2s_enable  */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x02, 0xb1600100); /* ssi0_enable */
-		au_writel(0x02, 0xb1680100); /* ssi1_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x03000000: /* Au1550 */
-		au_writel(0x00, 0xb1a00004); /* psc 0 */
-		au_writel(0x00, 0xb1b00004); /* psc 1 */
-		au_writel(0x00, 0xb0a00004); /* psc 2 */
-		au_writel(0x00, 0xb0b00004); /* psc 3 */
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb1520000); /* macen0 */
-		au_writel(0x00, 0xb1520004); /* macen1 */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	}
-
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-
-	/* Give board a chance to do a hardware reset */
-	board_reset();
-
-	/* Jump to the beggining in case board_reset() is empty */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
-	/* Power off system */
-	printk(KERN_NOTICE "\n** Powering off...\n");
-	au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
-	au_sync();
-	while (1); /* should not get here */
-#else
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
-	gpio_direction_output(210, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
-#endif
-#ifdef CONFIG_PM
-	au_sleep();
-
-	/* Should not get here */
-	printk(KERN_ERR "Unable to put CPU in sleep mode\n");
-	while (1);
-#else
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
-	au1000_halt();
-}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 6184baa..561e5da 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -29,18 +29,13 @@
 #include <linux/ioport.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/mipsregs.h>
-#include <asm/reboot.h>
 #include <asm/time.h>
 
 #include <au1000.h>
 
 extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
 	/* this is faster than wasting cycles trying to approximate it */
 	preset_lpj = (est_freq >> 1) / HZ;
 
-	_machine_restart = au1000_restart;
-	_machine_halt = au1000_halt;
-	pm_power_off = au1000_power_off;
-
 	board_setup();  /* board specific setup */
 
 	if (au1xxx_cpu_needs_config_od())
@@ -78,37 +69,20 @@ void __init plat_mem_setup(void)
 	iomem_resource.end = IOMEM_RESOURCE_END;
 }
 
-#if defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
 /* This routine should be valid for all Au1x based boards */
 phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
+	u32 start = (u32)Au1500_PCI_MEM_START;
+	u32 end   = (u32)Au1500_PCI_MEM_END;
+
 	/* Don't fixup 36-bit addresses */
 	if ((phys_addr >> 32) != 0)
 		return phys_addr;
 
-#ifdef CONFIG_PCI
-	{
-		u32 start = (u32)Au1500_PCI_MEM_START;
-		u32 end   = (u32)Au1500_PCI_MEM_END;
-
-		/* Check for PCI memory window */
-		if (phys_addr >= start && (phys_addr + size - 1) <= end)
-			return (phys_t)
-			       ((phys_addr - start) + Au1500_PCI_MEM_START);
-	}
-#endif
-
-	/*
-	 * All Au1xx0 SOCs have a PCMCIA controller.
-	 * We setup our 32-bit pseudo addresses to be equal to the
-	 * 36-bit addr >> 4, to make it easier to check the address
-	 * and fix it.
-	 * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
-	 * The pseudo address we use is 0xF400 0000. Any address over
-	 * 0xF400 0000 is a PCMCIA pseudo address.
-	 */
-	if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
-		return (phys_t)(phys_addr << 4);
+	/* Check for PCI memory window */
+	if (phys_addr >= start && (phys_addr + size - 1) <= end)
+		return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
 
 	/* default nop */
 	return phys_addr;
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4f4b167..77f3c74 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -22,10 +22,9 @@
 	.set noat
 	.align	5
 
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
 	subu	sp, PT_SIZE
 	sw	$1, PT_R1(sp)
 	sw	$2, PT_R2(sp)
@@ -69,12 +68,32 @@ LEAF(au1xxx_save_and_sleep)
 	 */
 	lui	t3, 0xb190		/* sys_xxx */
 	sw	sp, 0x0018(t3)
-	la	k0, 3f			/* resume path */
+	la	k0, alchemy_sleep_wakeup	/* resume path */
 	sw	k0, 0x001c(t3)
+.endm
 
-	/* Put SDRAM into self refresh:  Preload instructions into cache,
-	 * issue a precharge, auto/self refresh, then sleep commands to it.
-	 */
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
 	.set	mips3
 	cache	0x14, 0(t0)
@@ -84,17 +103,32 @@ LEAF(au1xxx_save_and_sleep)
 	.set	mips0
 
 1:	lui 	a0, 0xb400		/* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) ||	\
-    defined(CONFIG_SOC_AU1500)
 	sw	zero, 0x001c(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
 	sw	zero, 0x0030(a0)  	/* Sleep */
 	sync
-#endif
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	mips3
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui 	a0, 0xb400		/* mem_xxx */
 	sw	zero, 0x08c0(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
@@ -114,26 +148,17 @@ LEAF(au1xxx_save_and_sleep)
 	and 	t1, t0, t1		/* clear CE[1:0] */
 	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
-#endif
 
-	/* put power supply and processor to sleep */
-	sw	zero, 0x0078(t3)	/* sys_slppwr */
-	sync
-	sw	zero, 0x007c(t3)	/* sys_sleep */
-	sync
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
 	 */
-3:	lw	k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
 	mtc0	k0, CP0_STATUS
 	lw	k0, 0x1c(sp)
 	mtc0	k0, CP0_CONTEXT
@@ -169,4 +194,4 @@ LEAF(au1xxx_save_and_sleep)
 	lw	$31, PT_R31(sp)
 	jr	ra
 	 addiu	sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 379a664..2aecb2f 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
  *
  * Previous incarnations were:
  * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.name		= "rtcmatch2",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 100,
-	.irq		= AU1000_RTC_MATCH2_INT,
 	.set_next_event	= au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
 	.cpumask	= cpu_all_mask,
@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
 	.dev_id		= &au1x_rtcmatch2_clockdev,
 };
 
-void __init plat_time_init(void)
+static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
 	unsigned long t;
 
+	au1x_rtcmatch2_clockdev.irq = m2int;
+
 	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
 	 * has been detected.  If so install the rtcmatch2 clocksource,
 	 * otherwise don't bother.  Note that both bits being set is by
@@ -148,13 +149,18 @@ void __init plat_time_init(void)
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
 	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
 	clockevents_register_device(cd);
-	setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
-	return;
+	return 0;
 
 cntr_err:
+	return -1;
+}
+
+static void __init alchemy_setup_c0timer(void)
+{
 	/*
 	 * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
 	 * function is called.  Because the Alchemy counters are unusable
@@ -166,3 +172,22 @@ cntr_err:
 	r4k_clockevent_init();
 	init_r4k_clocksource();
 }
+
+static int alchemy_m2inttab[] __initdata = {
+	AU1000_RTC_MATCH2_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1550_RTC_MATCH2_INT,
+	AU1200_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+	int t;
+
+	t = alchemy_get_cputype();
+	if (t == ALCHEMY_CPU_UNKNOWN)
+		alchemy_setup_c0timer();
+	else if (alchemy_time_init(alchemy_m2inttab[t]))
+		alchemy_setup_c0timer();
+}
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 730f9f2..ecbd37f 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -2,7 +2,7 @@
 # Alchemy Develboards
 #
 
-obj-y += prom.o
+obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
@@ -11,8 +11,10 @@ obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
 obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
 obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1200)	+= pb1200/
+obj-$(CONFIG_MIPS_DB1200)	+= db1200/
 obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
 obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
 obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
new file mode 100644
index 0000000..3bc4fd2
--- /dev/null
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -0,0 +1,148 @@
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address.
+ * All registers are 16bits wide with 32bit spacing.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static struct bcsr_reg {
+	void __iomem *raddr;
+	spinlock_t lock;
+} bcsr_regs[BCSR_CNT];
+
+static void __iomem *bcsr_virt;	/* KSEG1 addr of BCSR base */
+static int bcsr_csc_base;	/* linux-irq of first cascaded irq */
+
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
+{
+	int i;
+
+	bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys));
+	bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys));
+
+	bcsr_virt = (void __iomem *)bcsr1_phys;
+
+	for (i = 0; i < BCSR_CNT; i++) {
+		if (i >= BCSR_HEXLEDS)
+			bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys +
+					(0x04 * (i - BCSR_HEXLEDS));
+		else
+			bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys +
+					(0x04 * i);
+
+		spin_lock_init(&bcsr_regs[i].lock);
+	}
+}
+
+unsigned short bcsr_read(enum bcsr_id reg)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+	return r;
+}
+EXPORT_SYMBOL_GPL(bcsr_read);
+
+void bcsr_write(enum bcsr_id reg, unsigned short val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	__raw_writew(val, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_write);
+
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	r &= ~clr;
+	r |= set;
+	__raw_writew(r, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_mod);
+
+/*
+ * DB1200/PB1200 CPLD IRQ muxer
+ */
+static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
+{
+	unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
+
+	for ( ; bisr; bisr &= bisr - 1)
+		generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+}
+
+/* NOTE: both the enable and mask bits must be cleared, otherwise the
+ * CPLD generates tons of spurious interrupts (at least on my DB1200).
+ *	-- mlau
+ */
+static void bcsr_irq_mask(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	wmb();
+}
+
+static void bcsr_irq_maskack(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT);	/* ack */
+	wmb();
+}
+
+static void bcsr_irq_unmask(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
+	wmb();
+}
+
+static struct irq_chip bcsr_irq_type = {
+	.name		= "CPLD",
+	.mask		= bcsr_irq_mask,
+	.mask_ack	= bcsr_irq_maskack,
+	.unmask		= bcsr_irq_unmask,
+};
+
+void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
+{
+	unsigned int irq;
+
+	/* mask & disable & ack all */
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
+	wmb();
+
+	bcsr_csc_base = csc_start;
+
+	for (irq = csc_start; irq <= csc_end; irq++)
+		set_irq_chip_and_handler_name(irq, &bcsr_irq_type,
+			handle_level_irq, "level");
+
+	set_irq_chained_handler(hook_irq, bcsr_csc_handler);
+}
diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile
new file mode 100644
index 0000000..17840a5
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1200/Makefile
@@ -0,0 +1 @@
+obj-y += setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
new file mode 100644
index 0000000..3cb95a9
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -0,0 +1,561 @@
+/*
+ * DBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008-2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+#include "../platform.h"
+
+static struct mtd_partition db1200_spiflash_parts[] = {
+	{
+		.name	= "DB1200 SPI flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data db1200_spiflash_data = {
+	.name		= "s25fl001",
+	.parts		= db1200_spiflash_parts,
+	.nr_parts	= ARRAY_SIZE(db1200_spiflash_parts),
+	.type		= "m25p10",
+};
+
+static struct spi_board_info db1200_spi_devs[] __initdata = {
+	{
+		/* TI TMP121AIDBVR temp sensor */
+		.modalias	= "tmp121",
+		.max_speed_hz	= 2000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= 0,
+	},
+	{
+		/* Spansion S25FL001D0FMA SPI flash */
+		.modalias	= "m25p80",
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= 0,
+		.platform_data	= &db1200_spiflash_data,
+	},
+};
+
+static struct i2c_board_info db1200_i2c_devs[] __initdata = {
+	{
+		/* AT24C04-10 I2C eeprom */
+		I2C_BOARD_INFO("24c04", 0x52),
+	},
+	{
+		/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
+		I2C_BOARD_INFO("ne1619", 0x2d),
+	},
+	{
+		/* I2S audio codec WM8731 */
+		I2C_BOARD_INFO("wm8731", 0x1b),
+	},
+};
+
+/**********************************************************************/
+
+static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1200_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1200_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1200_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
+		.partitions	= db1200_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1200_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1200_nand_device_ready,
+		.cmd_ctrl	= au1200_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1200_nand_res[] = {
+	[0] = {
+		.start	= DB1200_NAND_PHYS_ADDR,
+		.end	= DB1200_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1200_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1200_nand_res),
+	.resource	= db1200_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1200_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct smc91x_platdata db1200_eth_data = {
+	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource db1200_eth_res[] = {
+	[0] = {
+		.start	= DB1200_ETH_PHYS_ADDR,
+		.end	= DB1200_ETH_PHYS_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_ETH_INT,
+		.end	= DB1200_ETH_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1200_eth_dev = {
+	.dev	= {
+		.platform_data	= &db1200_eth_data,
+	},
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(db1200_eth_res),
+	.resource	= db1200_eth_res,
+};
+
+/**********************************************************************/
+
+static struct resource db1200_ide_res[] = {
+	[0] = {
+		.start	= DB1200_IDE_PHYS_ADDR,
+		.end 	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_IDE_INT,
+		.end	= DB1200_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 ide_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_ide_dev = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+	},
+	.num_resources	= ARRAY_SIZE(db1200_ide_res),
+	.resource	= db1200_ide_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device db1200_rtc_dev = {
+	.name	= "rtc-au1xxx",
+	.id	= -1,
+};
+
+/**********************************************************************/
+
+/* SD carddetects:  they're supposed to be edge-triggered, but ack
+ * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
+ * is disabled and its counterpart enabled.  The 500ms timeout is
+ * because the carddetect isn't debounced in hardware.
+ */
+static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	if (irq == DB1200_SD0_INSERT_INT) {
+		disable_irq_nosync(DB1200_SD0_INSERT_INT);
+		enable_irq(DB1200_SD0_EJECT_INT);
+	} else {
+		disable_irq_nosync(DB1200_SD0_EJECT_INT);
+		enable_irq(DB1200_SD0_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	if (mmc_cd) {
+		mmc_cd(ptr, msecs_to_jiffies(500));
+		symbol_put(mmc_detect_change);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int db1200_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
+				  IRQF_DISABLED, "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
+				  IRQF_DISABLED, "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
+			enable_irq(DB1200_SD0_EJECT_INT);
+		else
+			enable_irq(DB1200_SD0_INSERT_INT);
+
+	} else {
+		free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+		free_irq(DB1200_SD0_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1200_mmc_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static int db1200_mmc_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int db1200_mmc_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void db1200_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1200_mmc_led = {
+	.brightness_set	= db1200_mmcled_set,
+};
+
+/* needed by arch/mips/alchemy/common/platform.c */
+struct au1xmmc_platform_data au1xmmc_platdata[] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+};
+
+/**********************************************************************/
+
+static struct resource au1200_psc0_res[] = {
+	[0] = {
+		.start	= PSC0_PHYS_ADDR,
+		.end	= PSC0_PHYS_ADDR + 0x000fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC0_INT,
+		.end	= AU1200_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DSCR_CMD0_PSC0_TX,
+		.end	= DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DSCR_CMD0_PSC0_RX,
+		.end	= DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+	if (cs)
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
+	else
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1200_spi_platdata = {
+	.mainclk_hz	= 50000000,	/* PSC0 clock */
+	.num_chipselect = 2,
+	.activate_cs	= db1200_spi_cs_en,
+};
+
+static u64 spi_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_spi_dev = {
+	.dev	= {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &db1200_spi_platdata,
+	},
+	.name		= "au1550-spi",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static struct resource au1200_psc1_res[] = {
+	[0] = {
+		.start	= PSC1_PHYS_ADDR,
+		.end	= PSC1_PHYS_ADDR + 0x000fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC1_INT,
+		.end	= AU1200_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DSCR_CMD0_PSC1_TX,
+		.end	= DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DSCR_CMD0_PSC1_RX,
+		.end	= DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_audio_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1200_psc1_res),
+	.resource	= au1200_psc1_res,
+};
+
+static struct platform_device *db1200_devs[] __initdata = {
+	NULL,		/* PSC0, selected by S6.8 */
+	&db1200_ide_dev,
+	&db1200_eth_dev,
+	&db1200_rtc_dev,
+	&db1200_nand_dev,
+	&db1200_audio_dev,
+};
+
+static int __init db1200_dev_init(void)
+{
+	unsigned long pfc;
+	unsigned short sw;
+	int swapped;
+
+	i2c_register_board_info(0, db1200_i2c_devs,
+				ARRAY_SIZE(db1200_i2c_devs));
+	spi_register_board_info(db1200_spi_devs,
+				ARRAY_SIZE(db1200_i2c_devs));
+
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 */
+
+	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
+	 * this pin is claimed by PSC0 (unused though, but pinmux doesn't
+	 * allow to free it without crippling the SPI interface).
+	 * As a result, in SPI mode, OTG simply won't work (PSC0 uses
+	 * it as an input pin which is pulled high on the boards).
+	 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
+
+	/* switch off OTG VBUS supply */
+	gpio_request(215, "otg-vbus");
+	gpio_direction_output(215, 1);
+
+	printk(KERN_INFO "DB1200 device configuration:\n");
+
+	sw = bcsr_read(BCSR_SWITCHES);
+	if (sw & BCSR_SWITCHES_DIP_8) {
+		db1200_devs[0] = &db1200_i2c_dev;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+
+		pfc |= (2 << 17);	/* GPIO2 block owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
+		printk(KERN_INFO "   OTG port VBUS supply available!\n");
+	} else {
+		db1200_devs[0] = &db1200_spi_dev;
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
+
+		pfc |= (1 << 17);	/* PSC0 owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
+		printk(KERN_INFO "   OTG port VBUS supply disabled\n");
+	}
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
+	 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
+	 */
+	sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
+	if (sw == BCSR_SWITCHES_DIP_8) {
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
+		db1200_audio_dev.name = "au1xpsc_i2s";
+		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
+	} else {
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
+		db1200_audio_dev.name = "au1xpsc_ac97";
+		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
+	}
+
+	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+		(void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    DB1200_PC0_INT,
+				    DB1200_PC0_INSERT_INT,
+				    /*DB1200_PC0_STSCHG_INT*/0,
+				    DB1200_PC0_EJECT_INT,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+				    DB1200_PC1_INT,
+				    DB1200_PC1_INSERT_INT,
+				    /*DB1200_PC1_STSCHG_INT*/0,
+				    DB1200_PC1_EJECT_INT,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+}
+device_initcall(db1200_dev_init);
+
+/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
+int board_au1200fb_panel(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+int board_au1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+int board_au1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}
diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
new file mode 100644
index 0000000..8876195
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -0,0 +1,82 @@
+/*
+ * Alchemy/AMD/RMI DB1200 board setup.
+ *
+ * Licensed under the terms outlined in the file COPYING in the root of
+ * this source archive.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+const char *get_system_type(void)
+{
+	return "Alchemy Db1200";
+}
+
+void __init board_setup(void)
+{
+	unsigned long freq0, clksrc, div, pfc;
+	unsigned short whoami;
+
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n",
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+	 * CPU clock; all other clock generators off/unused.
+	 */
+	div = (get_au1x00_speed() + 25000000) / 50000000;
+	if (div & 1)
+		div++;
+	div = ((div >> 1) - 1) & 0xff;
+
+	freq0 = div << SYS_FC_FRDIV0_BIT;
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+	freq0 |= SYS_FC_FE0;	/* enable F0 */
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+
+	/* psc0_intclk comes 1:1 from F0 */
+	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+	wmb();
+}
+
+static int __init db1200_arch_init(void)
+{
+	/* GPIO7 is low-level triggered CPLD cascade */
+	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
+	 */
+	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
+
+	return 0;
+}
+arch_initcall(db1200_arch_init);
diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
index 432241a..613c0c0 100644
--- a/arch/mips/alchemy/devboards/db1x00/Makefile
+++ b/arch/mips/alchemy/devboards/db1x00/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
 #
 
-obj-y := board_setup.o irqmap.o
+obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index de30d8e..50c9bef 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -29,59 +29,139 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 #include <asm/mach-db1x00/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
 
 #include <prom.h>
 
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+#endif
 
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+/*
+ * Micrel/Kendin 5 port switch attached to MAC0,
+ * MAC0 is associated with PHY address 5 (== WAN port)
+ * MAC1 is not associated with any PHY, since it's connected directly
+ * to the switch.
+ * no interrupts are used
+ */
+static struct au1000_eth_platform_data eth0_pdata = {
+	.phy_static_config	= 1,
+	.phy_addr		= 5,
+};
+
+static void bosporus_power_off(void)
+{
+	printk(KERN_INFO "It's now safe to turn off power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips0");
+}
 
 const char *get_system_type(void)
 {
-#ifdef CONFIG_MIPS_BOSPORUS
 	return "Alchemy Bosporus Gateway Reference";
-#else
-	return "Alchemy Db1x00";
+}
 #endif
+
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
+	[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
+};
+
+static void mirage_power_off(void)
+{
+	alchemy_gpio_direction_output(210, 1);
+}
+
+const char *get_system_type(void)
+{
+	return "Alchemy Mirage";
+}
+#endif
+
+
+#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+static void mips_softreset(void)
+{
+	asm volatile ("jr\t%0" : : "r"(0xbfc00000));
 }
 
-void board_reset(void)
+#else
+
+const char *get_system_type(void)
 {
-	/* Hit BCSR.SW_RESET[RESET] */
-	bcsr->swreset = 0x0000;
+	return "Alchemy Db1x00";
 }
+#endif
+
 
 void __init board_setup(void)
 {
-	u32 pin_func = 0;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
+	unsigned long bcsr1, bcsr2;
+	u32 pin_func;
+
+	bcsr1 = DB1000_BCSR_PHYS_ADDR;
+	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
+
+	pin_func = 0;
+
+#ifdef CONFIG_MIPS_DB1000
+	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
 #endif
+#ifdef CONFIG_MIPS_DB1100
+	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+	au1xxx_override_eth_cfg(0, &eth0_pdata);
 
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
+	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 #endif
+#ifdef CONFIG_MIPS_MIRAGE
+	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
+	bcsr1 = DB1550_BCSR_PHYS_ADDR;
+	bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
 #endif
 
+	/* initialize board register space */
+	bcsr_init(bcsr1, bcsr2);
+
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
@@ -89,11 +169,10 @@ void __init board_setup(void)
 	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
 	au_writel(pin_func, SYS_PINFUNC);
 	/* Power off until the driver is in use */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
-	au_sync();
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+				BCSR_RESETS_IRDA_MODE_OFF);
 #endif
-	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	/* Enable GPIO[31:0] inputs */
 	alchemy_gpio1_input_enable();
@@ -120,26 +199,53 @@ void __init board_setup(void)
 	 * be part of the audio driver.
 	 */
 	alchemy_gpio_direction_output(209, 1);
-#endif
-
-	au_sync();
 
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+	pm_power_off = mirage_power_off;
+	_machine_halt = mirage_power_off;
+	_machine_restart = (void(*)(char *))mips_softreset;
 #endif
+
 #ifdef CONFIG_MIPS_BOSPORUS
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
+	pm_power_off = bosporus_power_off;
+	_machine_halt = bosporus_power_off;
+	_machine_restart = (void(*)(char *))mips_softreset;
 #endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
+	au_sync();
+}
+
+static int __init db1x00_init_irq(void)
+{
+#if defined(CONFIG_MIPS_MIRAGE)
+	set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
+#elif defined(CONFIG_MIPS_DB1550)
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
+	set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
+	set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
+	set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1500)
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1100)
+	set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1000)
+	set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 #endif
+	return 0;
 }
+arch_initcall(db1x00_init_irq);
diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
deleted file mode 100644
index 0b09025..0000000
--- a/arch/mips/alchemy/devboards/db1x00/irqmap.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI  */
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
-	[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
-	[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-
-#ifndef CONFIG_MIPS_MIRAGE
-#ifdef CONFIG_MIPS_DB1550
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#else
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
-	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
-	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#endif
-#else
-	{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
-#endif
-
-};
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
new file mode 100644
index 0000000..978d5ab
--- /dev/null
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -0,0 +1,118 @@
+/*
+ * DBAu1xxx board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include "../platform.h"
+
+/* DB1xxx PCMCIA interrupt sources:
+ * CD0/1 	GPIO0/3
+ * STSCHG0/1	GPIO1/4
+ * CARD0/1	GPIO2/5
+ * Db1550:	0/1, 21/22, 3/5
+ */
+
+#define DB1XXX_HAS_PCMCIA
+#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
+
+#if defined(CONFIG_MIPS_DB1000)
+#define DB1XXX_PCMCIA_CD0	AU1000_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1000_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1100)
+#define DB1XXX_PCMCIA_CD0	AU1100_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1100_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1100_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1100_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1100_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1100_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1500)
+#define DB1XXX_PCMCIA_CD0	AU1500_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1500_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1500_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1500_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_PCMCIA_CD0	AU1550_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1550_GPIO21_INT
+#define DB1XXX_PCMCIA_CARD0	AU1550_GPIO3_INT
+#define DB1XXX_PCMCIA_CD1	AU1550_GPIO1_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1550_GPIO22_INT
+#define DB1XXX_PCMCIA_CARD1	AU1550_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#else
+/* other board: no PCMCIA */
+#undef DB1XXX_HAS_PCMCIA
+#undef F_SWAPPED
+#define F_SWAPPED 0
+#if defined(CONFIG_MIPS_BOSPORUS)
+#define BOARD_FLASH_SIZE	0x01000000 /* 16MB */
+#define BOARD_FLASH_WIDTH	2 /* 16-bits */
+#elif defined(CONFIG_MIPS_MIRAGE)
+#define BOARD_FLASH_SIZE	0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#endif
+#endif
+
+static int __init db1xxx_dev_init(void)
+{
+#ifdef DB1XXX_HAS_PCMCIA
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    DB1XXX_PCMCIA_CARD0,
+				    DB1XXX_PCMCIA_CD0,
+				    /*DB1XXX_PCMCIA_STSCHG0*/0,
+				    0,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+				    DB1XXX_PCMCIA_CARD1,
+				    DB1XXX_PCMCIA_CD1,
+				    /*DB1XXX_PCMCIA_STSCHG1*/0,
+				    0,
+				    1);
+#endif
+	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+	return 0;
+}
+device_initcall(db1xxx_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index cd27354..4ef50d8 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -27,28 +27,29 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
+#include <asm/reboot.h>
 #include <prom.h>
 
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
-};
-
+#include "../platform.h"
 
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1000";
 }
 
-void board_reset(void)
+static void board_reset(char *c)
 {
+	asm volatile ("jr %0" : : "r" (0xbfc00000));
 }
 
-void __init board_init_irq(void)
+static void board_power_off(void)
 {
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
 }
 
 void __init board_setup(void)
@@ -57,14 +58,8 @@ void __init board_setup(void)
 	u32 sys_freqctrl, sys_clksrc;
 	u32 prid = read_c0_prid();
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	sys_freqctrl = 0;
+	sys_clksrc = 0;
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
@@ -192,4 +187,21 @@ void __init board_setup(void)
 		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 		break;
 	}
+
+	pm_power_off = board_power_off;
+	_machine_halt = board_power_off;
+	_machine_restart = board_reset;
+}
+
+static int __init pb1000_init_irq(void)
+{
+	set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
+	return 0;
+}
+arch_initcall(pb1000_init_irq);
+
+static int __init pb1000_device_init(void)
+{
+	return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
 }
+device_initcall(pb1000_device_init);
diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
index c586dd7..7e3756c 100644
--- a/arch/mips/alchemy/devboards/pb1100/Makefile
+++ b/arch/mips/alchemy/devboards/pb1100/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1100 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index 6126308..90dda5f 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -29,63 +29,22 @@
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1100.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
 
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
-	{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
-	{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
-	{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
-};
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1100";
 }
 
-void board_reset(void)
-{
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1100_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
-
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
-#endif
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
@@ -155,3 +114,14 @@ void __init board_setup(void)
 		au_sync();
 	}
 }
+
+static int __init pb1100_init_irq(void)
+{
+	set_irq_type(AU1100_GPIO9_INT,  IRQF_TRIGGER_LOW); /* PCCD# */
+	set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
+	set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
+	set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
+
+	return 0;
+}
+arch_initcall(pb1100_init_irq);
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
new file mode 100644
index 0000000..2c8dc29
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1100/platform.c
@@ -0,0 +1,50 @@
+/*
+ * Pb1100 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1100_dev_init(void)
+{
+	int swapped;
+
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1100_GPIO11_INT,	 /* card */
+				    AU1100_GPIO9_INT,	 /* insert */
+				    /*AU1100_GPIO10_INT*/0, /* stschg */
+				    0,			 /* eject */
+				    0);			 /* id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1100_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
index c8c3a99..2ea9b02 100644
--- a/arch/mips/alchemy/devboards/pb1200/Makefile
+++ b/arch/mips/alchemy/devboards/pb1200/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
 #
 
-obj-y := board_setup.o irqmap.o platform.o
+obj-y := board_setup.o platform.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 94e6b7e..8b4466f 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -25,38 +25,34 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/sched.h>
 
-#include <prom.h>
-#include <au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
 
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+#include <prom.h>
 
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1200";
 }
 
-void board_reset(void)
-{
-	bcsr->resets = 0;
-	bcsr->system = 0;
-}
-
 void __init board_setup(void)
 {
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-#ifdef CONFIG_FB_AU1200
-	strcat(argptr, " video=au1200fb:panel:bs");
-#endif
+	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
 
 #if 0
 	{
@@ -82,7 +78,7 @@ void __init board_setup(void)
 		u32 pin_func;
 
 		/* Select SMBus in CPLD */
-		bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 
 		pin_func = au_readl(SYS_PINFUNC);
 		au_sync();
@@ -116,38 +112,54 @@ void __init board_setup(void)
 
 	/*
 	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
 	 */
 #ifdef CONFIG_I2C_AU1550
-	bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 #endif
 	au_sync();
+}
 
-#ifdef CONFIG_MIPS_PB1200
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
-#endif
+static int __init pb1200_init_irq(void)
+{
+	/* We have a problem with CPLD rev 3. */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+		printk(KERN_ERR "updated to latest revision. This software will\n");
+		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		panic("Game over.  Your score is 0.");
+	}
+
+	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
+
+	return 0;
 }
+arch_initcall(pb1200_init_irq);
+
 
 int board_au1200fb_panel(void)
 {
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-	int p;
-
-	p = bcsr->switches;
-	p >>= 8;
-	p &= 0x0F;
-	return p;
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
 }
 
 int board_au1200fb_panel_init(void)
 {
 	/* Apply power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
 	return 0;
 }
@@ -155,10 +167,8 @@ int board_au1200fb_panel_init(void)
 int board_au1200fb_panel_shutdown(void)
 {
 	/* Remove power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			 BCSR_BOARD_LCDBL);
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
 	return 0;
 }
diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
deleted file mode 100644
index fe47498..0000000
--- a/arch/mips/alchemy/devboards/pb1200/irqmap.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	/* This is external interrupt cascade */
-	{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-/*
- * Support for External interrupts on the Pb1200 Development platform.
- */
-
-static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
-{
-	unsigned short bisr = bcsr->int_status;
-
-	for ( ; bisr; bisr &= bisr - 1)
-		generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
-}
-
-/* NOTE: both the enable and mask bits must be cleared, otherwise the
- * CPLD generates tons of spurious interrupts (at least on the DB1200).
- */
-static void pb1200_mask_irq(unsigned int irq_nr)
-{
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
-}
-
-static void pb1200_maskack_irq(unsigned int irq_nr)
-{
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN);	/* ack */
-	au_sync();
-}
-
-static void pb1200_unmask_irq(unsigned int irq_nr)
-{
-	bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
-}
-
-static struct irq_chip pb1200_cpld_irq_type = {
-#ifdef CONFIG_MIPS_PB1200
-	.name = "Pb1200 Ext",
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	.name = "Db1200 Ext",
-#endif
-	.mask		= pb1200_mask_irq,
-	.mask_ack	= pb1200_maskack_irq,
-	.unmask		= pb1200_unmask_irq,
-};
-
-void __init board_init_irq(void)
-{
-	unsigned int irq;
-
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-
-#ifdef CONFIG_MIPS_PB1200
-	/* We have a problem with CPLD rev 3. */
-	if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
-		printk(KERN_ERR "updated to latest revision. This software will\n");
-		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		panic("Game over.  Your score is 0.");
-	}
-#endif
-	/* mask & disable & ack all */
-	bcsr->intclr_mask = 0xffff;
-	bcsr->intclr = 0xffff;
-	bcsr->int_status = 0xffff;
-	au_sync();
-
-	for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
-		set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
-					 handle_level_irq, "level");
-
-	set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
-}
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index b93dff4..3ef2dce 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -26,27 +26,30 @@
 
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
 
 static int mmc_activity;
 
 static void pb1200mmc0_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc0_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
 }
 
 static int pb1200mmc0_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
 }
 
 static void pb1200_mmcled_set(struct led_classdev *led,
@@ -54,10 +57,10 @@ static void pb1200_mmcled_set(struct led_classdev *led,
 {
 	if (brightness != LED_OFF) {
 		if (++mmc_activity == 1)
-			bcsr->disk_leds &= ~(1 << 8);
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 	} else {
 		if (--mmc_activity == 0)
-			bcsr->disk_leds |= (1 << 8);
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 	}
 }
 
@@ -65,27 +68,25 @@ static struct led_classdev pb1200mmc_led = {
 	.brightness_set	= pb1200_mmcled_set,
 };
 
-#ifndef CONFIG_MIPS_DB1200
 static void pb1200mmc1_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc1_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
 }
 
 static int pb1200mmc1_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 }
-#endif
 
 const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 	[0] = {
@@ -95,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 		.cd_setup	= NULL,		/* use poll-timer in driver */
 		.led		= &pb1200mmc_led,
 	},
-#ifndef CONFIG_MIPS_DB1200
 	[1] = {
 		.set_power	= pb1200mmc1_set_power,
 		.card_inserted	= pb1200mmc1_card_inserted,
@@ -103,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 		.cd_setup	= NULL,		/* use poll-timer in driver */
 		.led		= &pb1200mmc_led,
 	},
-#endif
 };
 
 static struct resource ide_resources[] = {
@@ -169,8 +168,36 @@ static struct platform_device *board_platform_devices[] __initdata = {
 
 static int __init board_register_devices(void)
 {
+	int swapped;
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    PB1200_PC0_INT,
+				    PB1200_PC0_INSERT_INT,
+				    /*PB1200_PC0_STSCHG_INT*/0,
+				    PB1200_PC0_EJECT_INT,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+				    PB1200_PC1_INT,
+				    PB1200_PC1_INSERT_INT,
+				    /*PB1200_PC1_STSCHG_INT*/0,
+				    PB1200_PC1_EJECT_INT,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
+
 	return platform_add_devices(board_platform_devices,
 				    ARRAY_SIZE(board_platform_devices));
 }
-
-arch_initcall(board_register_devices);
+device_initcall(board_register_devices);
diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
index 173b419..e83b151 100644
--- a/arch/mips/alchemy/devboards/pb1500/Makefile
+++ b/arch/mips/alchemy/devboards/pb1500/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1500 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index d7a5656..9cd9dfa 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -29,22 +29,14 @@
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1500.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff },   /* IDSEL 12 - HPT370	*/
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD },   /* IDSEL 13 - PCI slot */
 };
 
 
@@ -53,37 +45,13 @@ const char *get_system_type(void)
 	return "Alchemy Pb1500";
 }
 
-void board_reset(void)
-{
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1500_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;
 	u32 sys_freqctrl, sys_clksrc;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
@@ -163,3 +131,18 @@ void __init board_setup(void)
 		au_sync();
 	}
 }
+
+static int __init pb1500_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
+	set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
+	set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(pb1500_init_irq);
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
new file mode 100644
index 0000000..d443bc7
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1500/platform.c
@@ -0,0 +1,49 @@
+/*
+ * Pb1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1500_dev_init(void)
+{
+	int swapped;
+
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1500_GPIO11_INT,	 /* card */
+				    AU1500_GPIO9_INT,	 /* insert */
+				    /*AU1500_GPIO10_INT*/0, /* stschg */
+				    0,			 /* eject */
+				    0);			 /* id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
index cff95bc..9661b6e 100644
--- a/arch/mips/alchemy/devboards/pb1550/Makefile
+++ b/arch/mips/alchemy/devboards/pb1550/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b6e9e7d..9d7d6ed 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,18 +32,15 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/gpio.h>
 
 #include <prom.h>
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 
 const char *get_system_type(void)
@@ -51,30 +48,14 @@ const char *get_system_type(void)
 	return "Alchemy Pb1550";
 }
 
-void board_reset(void)
-{
-	/* Hit BCSR.SYSTEM[RESET] */
-	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+	alchemy_gpio2_enable();
 
 	/*
 	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
@@ -85,8 +66,21 @@ void __init board_setup(void)
 	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
 	au_writel(pin_func, SYS_PINFUNC);
 
-	au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-	au_sync();
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
 }
+
+static int __init pb1550_init_irq(void)
+{
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+	/* enable both PCMCIA card irqs in the shared line */
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
+
+	return 0;
+}
+arch_initcall(pb1550_init_irq);
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c
new file mode 100644
index 0000000..d7150d0
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pb1550/platform.c
@@ -0,0 +1,69 @@
+/*
+ * Pb1550 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1550_dev_init(void)
+{
+	int swapped;
+
+	/* Pb1550, like all others, also has statuschange irqs; however they're
+	* wired up on one of the Au1550's shared GPIO201_205 line, which also
+	* services the PCMCIA card interrupts.  So we ignore statuschange and
+	* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
+	* drivers are used to shared irqs and b) statuschange isn't really use-
+	* ful anyway.
+	*/
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO0_INT,
+				    0,
+				    0,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO1_INT,
+				    0,
+				    0,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
+	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1550_dev_init);
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
new file mode 100644
index 0000000..49a4b32
--- /dev/null
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -0,0 +1,222 @@
+/*
+ * devoard misc stuff.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static void db1x_power_off(void)
+{
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
+}
+
+static void db1x_reset(char *c)
+{
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, 0);
+}
+
+static int __init db1x_poweroff_setup(void)
+{
+	if (!pm_power_off)
+		pm_power_off = db1x_power_off;
+	if (!_machine_halt)
+		_machine_halt = db1x_power_off;
+	if (!_machine_restart)
+		_machine_restart = db1x_reset;
+
+	return 0;
+}
+late_initcall(db1x_poweroff_setup);
+
+/* register a pcmcia socket */
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+				       phys_addr_t pcmcia_attr_end,
+				       phys_addr_t pcmcia_mem_start,
+				       phys_addr_t pcmcia_mem_end,
+				       phys_addr_t pcmcia_io_start,
+				       phys_addr_t pcmcia_io_end,
+				       int card_irq,
+				       int cd_irq,
+				       int stschg_irq,
+				       int eject_irq,
+				       int id)
+{
+	int cnt, i, ret;
+	struct resource *sr;
+	struct platform_device *pd;
+
+	cnt = 5;
+	if (eject_irq)
+		cnt++;
+	if (stschg_irq)
+		cnt++;
+
+	sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
+	if (!sr)
+		return -ENOMEM;
+
+	pd = platform_device_alloc("db1xxx_pcmcia", id);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	sr[0].name	= "pcmcia-attr";
+	sr[0].flags	= IORESOURCE_MEM;
+	sr[0].start	= pcmcia_attr_start;
+	sr[0].end	= pcmcia_attr_end;
+
+	sr[1].name	= "pcmcia-mem";
+	sr[1].flags	= IORESOURCE_MEM;
+	sr[1].start	= pcmcia_mem_start;
+	sr[1].end	= pcmcia_mem_end;
+
+	sr[2].name	= "pcmcia-io";
+	sr[2].flags	= IORESOURCE_MEM;
+	sr[2].start	= pcmcia_io_start;
+	sr[2].end	= pcmcia_io_end;
+
+	sr[3].name	= "insert";
+	sr[3].flags	= IORESOURCE_IRQ;
+	sr[3].start = sr[3].end = cd_irq;
+
+	sr[4].name	= "card";
+	sr[4].flags	= IORESOURCE_IRQ;
+	sr[4].start = sr[4].end = card_irq;
+
+	i = 5;
+	if (stschg_irq) {
+		sr[i].name	= "stschg";
+		sr[i].flags	= IORESOURCE_IRQ;
+		sr[i].start = sr[i].end = stschg_irq;
+		i++;
+	}
+	if (eject_irq) {
+		sr[i].name	= "eject";
+		sr[i].flags	= IORESOURCE_IRQ;
+		sr[i].start = sr[i].end = eject_irq;
+	}
+
+	pd->resource = sr;
+	pd->num_resources = cnt;
+
+	ret = platform_device_add(pd);
+	if (!ret)
+		return 0;
+
+	platform_device_put(pd);
+out:
+	kfree(sr);
+	return ret;
+}
+
+#define YAMON_SIZE	0x00100000
+#define YAMON_ENV_SIZE	0x00040000
+
+int __init db1x_register_norflash(unsigned long size, int width,
+				  int swapped)
+{
+	struct physmap_flash_data *pfd;
+	struct platform_device *pd;
+	struct mtd_partition *parts;
+	struct resource *res;
+	int ret, i;
+
+	if (size < (8 * 1024 * 1024))
+		return -EINVAL;
+
+	ret = -ENOMEM;
+	parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
+	if (!parts)
+		goto out;
+
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		goto out1;
+
+	pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL);
+	if (!pfd)
+		goto out2;
+
+	pd = platform_device_alloc("physmap-flash", 0);
+	if (!pd)
+		goto out3;
+
+	/* NOR flash ends at 0x20000000, regardless of size */
+	res->start = 0x20000000 - size;
+	res->end = 0x20000000 - 1;
+	res->flags = IORESOURCE_MEM;
+
+	/* partition setup.  Most Develboards have a switch which allows
+	 * to swap the physical locations of the 2 NOR flash banks.
+	 */
+	i = 0;
+	if (!swapped) {
+		/* first NOR chip */
+		parts[i].offset = 0;
+		parts[i].name = "User FS";
+		parts[i].size = size / 2;
+		i++;
+	}
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "User FS 2";
+	parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000);
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "YAMON";
+	parts[i].size = YAMON_SIZE;
+	parts[i].mask_flags = MTD_WRITEABLE;
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "raw kernel";
+	parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE;
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "YAMON Env";
+	parts[i].size = YAMON_ENV_SIZE;
+	parts[i].mask_flags = MTD_WRITEABLE;
+	i++;
+
+	if (swapped) {
+		parts[i].offset = MTDPART_OFS_APPEND;
+		parts[i].name = "User FS";
+		parts[i].size = size / 2;
+		i++;
+	}
+
+	pfd->width = width;
+	pfd->parts = parts;
+	pfd->nr_parts = 5;
+
+	pd->dev.platform_data = pfd;
+	pd->resource = res;
+	pd->num_resources = 1;
+
+	ret = platform_device_add(pd);
+	if (!ret)
+		return ret;
+
+	platform_device_put(pd);
+out3:
+	kfree(pfd);
+out2:
+	kfree(res);
+out1:
+	kfree(parts);
+out:
+	return ret;
+}
diff --git a/arch/mips/alchemy/devboards/platform.h b/arch/mips/alchemy/devboards/platform.h
new file mode 100644
index 0000000..5ac055d
--- /dev/null
+++ b/arch/mips/alchemy/devboards/platform.h
@@ -0,0 +1,21 @@
+#ifndef _DEVBOARD_PLATFORM_H_
+#define _DEVBOARD_PLATFORM_H_
+
+#include <linux/init.h>
+
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+				       phys_addr_t pcmcia_attr_len,
+				       phys_addr_t pcmcia_mem_start,
+				       phys_addr_t pcmcia_mem_end,
+				       phys_addr_t pcmcia_io_start,
+				       phys_addr_t pcmcia_io_end,
+				       int card_irq,
+				       int cd_irq,
+				       int stschg_irq,
+				       int eject_irq,
+				       int id);
+
+int __init db1x_register_norflash(unsigned long size, int width,
+				  int swapped);
+
+#endif
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 632f986..4bbd313 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -10,6 +10,7 @@
 #include <linux/sysfs.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 /*
  * Generic suspend userspace interface for Alchemy development boards.
@@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc;
 
 static int db1x_pm_enter(suspend_state_t state)
 {
+	unsigned short bcsrs[16];
+	int i, j, hasint;
+
+	/* save CPLD regs */
+	hasint = bcsr_read(BCSR_WHOAMI);
+	hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200;
+	j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM;
+
+	for (i = BCSR_STATUS; i <= j; i++)
+		bcsrs[i] = bcsr_read(i);
+
+	/* shut off hexleds */
+	bcsr_write(BCSR_HEXCLEAR, 3);
+
 	/* enable GPIO based wakeup */
 	alchemy_gpio1_input_enable();
 
@@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state)
 	/* ...and now the sandman can come! */
 	au_sleep();
 
+
+	/* restore CPLD regs */
+	for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++)
+		bcsr_write(i, bcsrs[i]);
+
+	/* restore CPLD int registers */
+	if (hasint) {
+		bcsr_write(BCSR_INTCLR, 0xffff);
+		bcsr_write(BCSR_MASKCLR, 0xffff);
+		bcsr_write(BCSR_INTSTAT, 0xffff);
+		bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]);
+		bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]);
+	}
+
+	/* light up hexleds */
+	bcsr_write(BCSR_HEXCLEAR, 0);
+
 	return 0;
 }
 
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index 0042bd6..b30df5c 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -60,3 +60,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+    alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
index 7c67b3d..4a53815 100644
--- a/arch/mips/alchemy/mtx-1/Makefile
+++ b/arch/mips/alchemy/mtx-1/Makefile
@@ -6,7 +6,7 @@
 # Makefile for 4G Systems MTX-1 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o
 obj-y := platform.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 45b61c9..52d883d 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -30,34 +30,43 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
 int mtx1_pci_idsel(unsigned int devsel, int assert);
 
-void board_reset(void)
+static void mtx1_reset(char *c)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
 	au_writel(0x00000000, 0xAE00001C);
 }
 
-void __init board_setup(void)
+static void mtx1_power_off(void)
 {
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-	alchemy_gpio2_enable();
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
+}
 
+void __init board_setup(void)
+{
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -86,6 +95,10 @@ void __init board_setup(void)
 	alchemy_gpio_direction_output(211, 1);	/* green on */
 	alchemy_gpio_direction_output(212, 0);	/* red off */
 
+	pm_power_off = mtx1_power_off;
+	_machine_halt = mtx1_power_off;
+	_machine_restart = mtx1_reset;
+
 	printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
@@ -102,10 +115,22 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	au_sync_udelay(1);
+	udelay(1);
 	return 1;
 }
+
+static int __init mtx1_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(mtx1_init_irq);
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index 5e871c8..f8d2557 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -32,6 +32,7 @@
 #include <linux/init.h>
 
 #include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
@@ -58,3 +59,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
deleted file mode 100644
index f1ab12a..0000000
--- a/arch/mips/alchemy/mtx-1/irqmap.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-       { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-       { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
index db3c526..4dc81d7 100644
--- a/arch/mips/alchemy/xxs1500/Makefile
+++ b/arch/mips/alchemy/xxs1500/Makefile
@@ -5,4 +5,6 @@
 # Makefile for MyCable XXS1500 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o platform.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4de2d48..47b4292 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -25,31 +25,35 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
-void board_reset(void)
+static void xxs1500_reset(char *c)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
 	au_writel(0x00000000, 0xAE00001C);
 }
 
+static void xxs1500_power_off(void)
+{
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	pm_power_off = xxs1500_power_off;
+	_machine_halt = xxs1500_power_off;
+	_machine_restart = xxs1500_reset;
 
 	alchemy_gpio1_input_enable();
 	alchemy_gpio2_enable();
@@ -68,22 +72,6 @@ void __init board_setup(void)
 	/* Enable DTR = USB power up */
 	au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
 
-#ifdef CONFIG_PCMCIA_XXS1500
-	/* GPIO 0, 1, and 4 are inputs */
-	alchemy_gpio_direction_input(0);
-	alchemy_gpio_direction_input(1);
-	alchemy_gpio_direction_input(4);
-
-	/* GPIO2 208/9/10/11 are inputs */
-	alchemy_gpio_direction_input(208);
-	alchemy_gpio_direction_input(209);
-	alchemy_gpio_direction_input(210);
-	alchemy_gpio_direction_input(211);
-
-	/* Turn off power */
-	alchemy_gpio_direction_output(214, 0);
-#endif
-
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
 	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
@@ -92,3 +80,23 @@ void __init board_setup(void)
 #endif
 #endif
 }
+
+static int __init xxs1500_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
+
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(xxs1500_init_irq);
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 456fa14..15125c2 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 
 #include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
@@ -56,3 +57,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
deleted file mode 100644
index 0f0f301..0000000
--- a/arch/mips/alchemy/xxs1500/irqmap.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
-
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
-};
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c
new file mode 100644
index 0000000..e87c45c
--- /dev/null
+++ b/arch/mips/alchemy/xxs1500/platform.c
@@ -0,0 +1,63 @@
+/*
+ * XXS1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+static struct resource xxs1500_pcmcia_res[] = {
+	{
+		.name	= "pcmcia-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PHYS_ADDR,
+		.end	= PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PHYS_ADDR,
+		.end	= PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PHYS_ADDR,
+		.end	= PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+	},
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+	.name		= "xxs1500_pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
+	.resource	= xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+	&xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+	return platform_add_devices(xxs1500_devs,
+				    ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index cc65c8e..fc0e715 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +25,8 @@
 #include <linux/delay.h>
 #include <linux/gcd.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -94,12 +97,16 @@ struct tnetd7200_clocks {
 	struct tnetd7200_clock usb;
 };
 
-int ar7_cpu_clock = 150000000;
-EXPORT_SYMBOL(ar7_cpu_clock);
-int ar7_bus_clock = 125000000;
-EXPORT_SYMBOL(ar7_bus_clock);
-int ar7_dsp_clock;
-EXPORT_SYMBOL(ar7_dsp_clock);
+static struct clk bus_clk = {
+	.rate	= 125000000,
+};
+
+static struct clk cpu_clk = {
+	.rate	= 150000000,
+};
+
+static struct clk dsp_clk;
+static struct clk vbus_clk;
 
 static void approximate(int base, int target, int *prediv,
 			int *postdiv, int *mul)
@@ -185,7 +192,7 @@ static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -212,11 +219,11 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	u32 *bootcr, u32 frequency)
 {
 	int prediv, postdiv, mul;
-	int base_clock = ar7_bus_clock;
+	int base_clock = bus_clk.rate;
 
 	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
 	case BOOT_PLL_SOURCE_BUS:
-		base_clock = ar7_bus_clock;
+		base_clock = bus_clk.rate;
 		break;
 	case BOOT_PLL_SOURCE_REF:
 		base_clock = AR7_REF_CLOCK;
@@ -225,7 +232,7 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -247,18 +254,18 @@ static void __init tnetd7300_init_clocks(void)
 					ioremap_nocache(UR8_REGS_CLOCKS,
 					sizeof(struct tnetd7300_clocks));
 
-	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+	bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
 		&clocks->bus, bootcr, AR7_AFE_CLOCK);
 
 	if (*bootcr & BOOT_PLL_ASYNC_MODE)
-		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+		cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
 			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
 	else
-		ar7_cpu_clock = ar7_bus_clock;
+		cpu_clk.rate = bus_clk.rate;
 
-	if (ar7_dsp_clock == 250000000)
+	if (dsp_clk.rate == 250000000)
 		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
-			bootcr, ar7_dsp_clock);
+			bootcr, dsp_clk.rate);
 
 	iounmap(clocks);
 	iounmap(bootcr);
@@ -343,20 +350,20 @@ static void __init tnetd7200_init_clocks(void)
 		printk(KERN_INFO "Clocks: Setting DSP clock\n");
 		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
 			&dsp_prediv, &dsp_postdiv, &dsp_mul);
-		ar7_bus_clock =
+		bus_clk.rate =
 			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
 		tnetd7200_set_clock(dsp_base, &clocks->dsp,
 			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
-			ar7_bus_clock);
+			bus_clk.rate);
 
 		printk(KERN_INFO "Clocks: Setting CPU clock\n");
 		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 			&cpu_postdiv, &cpu_mul);
-		ar7_cpu_clock =
+		cpu_clk.rate =
 			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
 		tnetd7200_set_clock(cpu_base, &clocks->cpu,
 			cpu_prediv, cpu_postdiv, -1, cpu_mul,
-			ar7_cpu_clock);
+			cpu_clk.rate);
 
 	} else
 		if (*bootcr & BOOT_PLL_2TO1_MODE) {
@@ -365,48 +372,90 @@ static void __init tnetd7200_init_clocks(void)
 			printk(KERN_INFO "Clocks: Setting CPU clock\n");
 			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 				&cpu_postdiv, &cpu_mul);
-			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+			cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul)
 								/ cpu_postdiv;
 			tnetd7200_set_clock(cpu_base, &clocks->cpu,
 				cpu_prediv, cpu_postdiv, -1, cpu_mul,
-				ar7_cpu_clock);
+				cpu_clk.rate);
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ar7_cpu_clock / 2;
+			bus_clk.rate = cpu_clk.rate / 2;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 		} else {
 			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+			bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul)
 								/ dsp_postdiv;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 
-			ar7_cpu_clock = ar7_bus_clock;
+			cpu_clk.rate = bus_clk.rate;
 		}
 
 	printk(KERN_INFO "Clocks: Setting USB clock\n");
-	usb_base = ar7_bus_clock;
+	usb_base = bus_clk.rate;
 	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
 		&usb_postdiv, &usb_mul);
 	tnetd7200_set_clock(usb_base, &clocks->usb,
 		usb_prediv, usb_postdiv, -1, usb_mul,
 		TNETD7200_DEF_USB_CLK);
 
-	ar7_dsp_clock = ar7_cpu_clock;
+	dsp_clk.rate = cpu_clk.rate;
 
 	iounmap(clocks);
 	iounmap(bootcr);
 }
 
+/*
+ * Linux clock API
+ */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "bus"))
+		return &bus_clk;
+	/* cpmac and vbus share the same rate */
+	if (!strcmp(id, "cpmac"))
+		return &vbus_clk;
+	if (!strcmp(id, "cpu"))
+		return &cpu_clk;
+	if (!strcmp(id, "dsp"));
+		return &dsp_clk;
+	if (!strcmp(id, "vbus"))
+		return &vbus_clk;
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
@@ -415,12 +464,14 @@ int __init ar7_init_clocks(void)
 		tnetd7200_init_clocks();
 		break;
 	case AR7_CHIP_7300:
-		ar7_dsp_clock = tnetd7300_dsp_clock();
+		dsp_clk.rate = tnetd7300_dsp_clock();
 		tnetd7300_init_clocks();
 		break;
 	default:
 		break;
 	}
+	/* adjust vbus clock rate */
+	vbus_clk.rate = bus_clk.rate / 2;
 
 	return 0;
 }
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index 74e14a3..c32fbb5 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,31 +19,113 @@
  */
 
 #include <linux/module.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-ar7/gpio.h>
 
-static const char *ar7_gpio_list[AR7_GPIO_MAX];
+struct ar7_gpio_chip {
+	void __iomem		*regs;
+	struct gpio_chip	chip;
+};
 
-int gpio_request(unsigned gpio, const char *label)
+static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 {
-	if (gpio >= AR7_GPIO_MAX)
-		return -EINVAL;
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
 
-	if (ar7_gpio_list[gpio])
-		return -EBUSY;
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static void ar7_gpio_set_value(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
 
-	if (label)
-		ar7_gpio_list[gpio] = label;
-	else
-		ar7_gpio_list[gpio] = "busy";
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned gpio)
+static int ar7_gpio_direction_output(struct gpio_chip *chip,
+					unsigned gpio, int value)
 {
-	BUG_ON(!ar7_gpio_list[gpio]);
-	ar7_gpio_list[gpio] = NULL;
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
+
+	ar7_gpio_set_value(chip, gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static struct ar7_gpio_chip ar7_gpio_chip = {
+	.chip = {
+		.label			= "ar7-gpio",
+		.direction_input	= ar7_gpio_direction_input,
+		.direction_output	= ar7_gpio_direction_output,
+		.set			= ar7_gpio_set_value,
+		.get			= ar7_gpio_get_value,
+		.base			= 0,
+		.ngpio			= AR7_GPIO_MAX,
+	}
+};
+
+int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_enable);
+
+int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_disable);
+
+static int __init ar7_gpio_init(void)
+{
+	int ret;
+
+	ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO,
+					AR7_REGS_GPIO + 0x10);
+
+	if (!ar7_gpio_chip.regs) {
+		printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n");
+		return -ENOMEM;
+	}
+
+	ret = gpiochip_add(&ar7_gpio_chip.chip);
+	if (ret) {
+		printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n");
+		return ret;
+	}
+	printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n",
+				ar7_gpio_chip.chip.ngpio);
+	return ret;
 }
-EXPORT_SYMBOL(gpio_free);
+arch_initcall(ar7_gpio_init);
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
index 696c723..28abfee 100644
--- a/arch/mips/ar7/memory.c
+++ b/arch/mips/ar7/memory.c
@@ -62,8 +62,7 @@ void __init prom_meminit(void)
 	unsigned long pages;
 
 	pages = memsize() >> PAGE_SHIFT;
-	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
-			  BOOT_MEM_RAM);
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM);
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 85169c0..8f31d1d 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -34,45 +34,50 @@
 #include <linux/etherdevice.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
 #include <asm/mach-ar7/gpio.h>
 #include <asm/mach-ar7/prom.h>
 
+/*****************************************************************************
+ * VLYNQ Bus
+ ****************************************************************************/
 struct plat_vlynq_data {
 	struct plat_vlynq_ops ops;
 	int gpio_bit;
 	int reset_bit;
 };
 
-
 static int vlynq_on(struct vlynq_device *dev)
 {
-	int result;
+	int ret;
 	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 
-	result = gpio_request(pdata->gpio_bit, "vlynq");
-	if (result)
+	ret = gpio_request(pdata->gpio_bit, "vlynq");
+	if (ret)
 		goto out;
 
 	ar7_device_reset(pdata->reset_bit);
 
-	result = ar7_gpio_disable(pdata->gpio_bit);
-	if (result)
+	ret = ar7_gpio_disable(pdata->gpio_bit);
+	if (ret)
 		goto out_enabled;
 
-	result = ar7_gpio_enable(pdata->gpio_bit);
-	if (result)
+	ret = ar7_gpio_enable(pdata->gpio_bit);
+	if (ret)
 		goto out_enabled;
 
-	result = gpio_direction_output(pdata->gpio_bit, 0);
-	if (result)
+	ret = gpio_direction_output(pdata->gpio_bit, 0);
+	if (ret)
 		goto out_gpio_enabled;
 
 	msleep(50);
 
 	gpio_set_value(pdata->gpio_bit, 1);
+
 	msleep(50);
 
 	return 0;
@@ -83,320 +88,384 @@ out_enabled:
 	ar7_device_disable(pdata->reset_bit);
 	gpio_free(pdata->gpio_bit);
 out:
-	return result;
+	return ret;
 }
 
 static void vlynq_off(struct vlynq_device *dev)
 {
 	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
 	ar7_gpio_disable(pdata->gpio_bit);
 	gpio_free(pdata->gpio_bit);
 	ar7_device_disable(pdata->reset_bit);
 }
 
-static struct resource physmap_flash_resource = {
-	.name = "mem",
-	.flags = IORESOURCE_MEM,
-	.start = 0x10000000,
-	.end = 0x107fffff,
-};
-
-static struct resource cpmac_low_res[] = {
+static struct resource vlynq_low_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_MAC0,
-		.end = AR7_REGS_MAC0 + 0x7ff,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_VLYNQ0,
+		.end	= AR7_REGS_VLYNQ0 + 0xff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 27,
-		.end = 27,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 29,
+		.end	= 29,
 	},
-};
-
-static struct resource cpmac_high_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_MAC1,
-		.end = AR7_REGS_MAC1 + 0x7ff,
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x04000000,
+		.end	= 0x04ffffff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 41,
-		.end = 41,
+		.name	= "devirq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 80,
+		.end	= 111,
 	},
 };
 
-static struct resource vlynq_low_res[] = {
+static struct resource vlynq_high_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_VLYNQ0,
-		.end = AR7_REGS_VLYNQ0 + 0xff,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_VLYNQ1,
+		.end	= AR7_REGS_VLYNQ1 + 0xff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 29,
-		.end = 29,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 33,
+		.end	= 33,
 	},
 	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x04000000,
-		.end = 0x04ffffff,
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x0c000000,
+		.end	= 0x0cffffff,
 	},
 	{
-		.name = "devirq",
-		.flags = IORESOURCE_IRQ,
-		.start = 80,
-		.end = 111,
+		.name	= "devirq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 112,
+		.end	= 143,
 	},
 };
 
-static struct resource vlynq_high_res[] = {
-	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_VLYNQ1,
-		.end = AR7_REGS_VLYNQ1 + 0xff,
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops = {
+		.on	= vlynq_on,
+		.off	= vlynq_off,
 	},
-	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 33,
-		.end = 33,
+	.reset_bit	= 20,
+	.gpio_bit	= 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops = {
+		.on	= vlynq_on,
+		.off	= vlynq_off,
 	},
-	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x0c000000,
-		.end = 0x0cffffff,
+	.reset_bit	= 16,
+	.gpio_bit	= 19,
+};
+
+static struct platform_device vlynq_low = {
+	.id		= 0,
+	.name		= "vlynq",
+	.dev = {
+		.platform_data	= &vlynq_low_data,
 	},
-	{
-		.name = "devirq",
-		.flags = IORESOURCE_IRQ,
-		.start = 112,
-		.end = 143,
+	.resource	= vlynq_low_res,
+	.num_resources	= ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id		= 1,
+	.name		= "vlynq",
+	.dev = {
+		.platform_data	= &vlynq_high_data,
 	},
+	.resource	= vlynq_high_res,
+	.num_resources	= ARRAY_SIZE(vlynq_high_res),
 };
 
-static struct resource usb_res[] = {
-	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_USB,
-		.end = AR7_REGS_USB + 0xff,
+/*****************************************************************************
+ * Flash
+ ****************************************************************************/
+static struct resource physmap_flash_resource = {
+	.name	= "mem",
+	.flags	= IORESOURCE_MEM,
+	.start	= 0x10000000,
+	.end	= 0x107fffff,
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width	= 2,
+};
+
+static struct platform_device physmap_flash = {
+	.name		= "physmap-flash",
+	.dev = {
+		.platform_data	= &physmap_flash_data,
 	},
+	.resource	= &physmap_flash_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct resource cpmac_low_res[] = {
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 32,
-		.end = 32,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_MAC0,
+		.end	= AR7_REGS_MAC0 + 0x7ff,
 	},
 	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x03400000,
-		.end = 0x034001fff,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 27,
+		.end 	= 27,
 	},
 };
 
-static struct physmap_flash_data physmap_flash_data = {
-	.width = 2,
+static struct resource cpmac_high_res[] = {
+	{
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_MAC1,
+		.end	= AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 41,
+		.end	= 41,
+	},
 };
 
 static struct fixed_phy_status fixed_phy_status __initdata = {
-	.link = 1,
-	.speed = 100,
-	.duplex = 1,
+	.link		= 1,
+	.speed		= 100,
+	.duplex		= 1,
 };
 
 static struct plat_cpmac_data cpmac_low_data = {
-	.reset_bit = 17,
-	.power_bit = 20,
-	.phy_mask = 0x80000000,
+	.reset_bit	= 17,
+	.power_bit	= 20,
+	.phy_mask	= 0x80000000,
 };
 
 static struct plat_cpmac_data cpmac_high_data = {
-	.reset_bit = 21,
-	.power_bit = 22,
-	.phy_mask = 0x7fffffff,
-};
-
-static struct plat_vlynq_data vlynq_low_data = {
-	.ops.on = vlynq_on,
-	.ops.off = vlynq_off,
-	.reset_bit = 20,
-	.gpio_bit = 18,
-};
-
-static struct plat_vlynq_data vlynq_high_data = {
-	.ops.on = vlynq_on,
-	.ops.off = vlynq_off,
-	.reset_bit = 16,
-	.gpio_bit = 19,
-};
-
-static struct platform_device physmap_flash = {
-	.id = 0,
-	.name = "physmap-flash",
-	.dev.platform_data = &physmap_flash_data,
-	.resource = &physmap_flash_resource,
-	.num_resources = 1,
+	.reset_bit	= 21,
+	.power_bit	= 22,
+	.phy_mask	= 0x7fffffff,
 };
 
 static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device cpmac_low = {
-	.id = 0,
-	.name = "cpmac",
+	.id		= 0,
+	.name		= "cpmac",
 	.dev = {
-		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &cpmac_low_data,
+		.dma_mask		= &cpmac_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &cpmac_low_data,
 	},
-	.resource = cpmac_low_res,
-	.num_resources = ARRAY_SIZE(cpmac_low_res),
+	.resource	= cpmac_low_res,
+	.num_resources	= ARRAY_SIZE(cpmac_low_res),
 };
 
 static struct platform_device cpmac_high = {
-	.id = 1,
-	.name = "cpmac",
+	.id		= 1,
+	.name		= "cpmac",
 	.dev = {
-		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &cpmac_high_data,
+		.dma_mask		= &cpmac_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &cpmac_high_data,
 	},
-	.resource = cpmac_high_res,
-	.num_resources = ARRAY_SIZE(cpmac_high_res),
+	.resource	= cpmac_high_res,
+	.num_resources	= ARRAY_SIZE(cpmac_high_res),
 };
 
-static struct platform_device vlynq_low = {
-	.id = 0,
-	.name = "vlynq",
-	.dev.platform_data = &vlynq_low_data,
-	.resource = vlynq_low_res,
-	.num_resources = ARRAY_SIZE(vlynq_low_res),
-};
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
 
-static struct platform_device vlynq_high = {
-	.id = 1,
-	.name = "vlynq",
-	.dev.platform_data = &vlynq_high_data,
-	.resource = vlynq_high_res,
-	.num_resources = ARRAY_SIZE(vlynq_high_res),
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+/*****************************************************************************
+ * USB
+ ****************************************************************************/
+static struct resource usb_res[] = {
+	{
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_USB,
+		.end	= AR7_REGS_USB + 0xff,
+	},
+	{
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 32,
+		.end	= 32,
+	},
+	{
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x03400000,
+		.end	= 0x03401fff,
+	},
 };
 
+static struct platform_device ar7_udc = {
+	.name		= "ar7_udc",
+	.resource	= usb_res,
+	.num_resources	= ARRAY_SIZE(usb_res),
+};
 
+/*****************************************************************************
+ * LEDs
+ ****************************************************************************/
 static struct gpio_led default_leds[] = {
 	{
-		.name = "status",
-		.gpio = 8,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 8,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led dsl502t_leds[] = {
 	{
-		.name = "status",
-		.gpio = 9,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 9,
+		.active_low		= 1,
 	},
 	{
-		.name = "ethernet",
-		.gpio = 7,
-		.active_low = 1,
+		.name			= "ethernet",
+		.gpio			= 7,
+		.active_low		= 1,
 	},
 	{
-		.name = "usb",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "usb",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led dg834g_leds[] = {
 	{
-		.name = "ppp",
-		.gpio = 6,
-		.active_low = 1,
+		.name			= "ppp",
+		.gpio			= 6,
+		.active_low		= 1,
 	},
 	{
-		.name = "status",
-		.gpio = 7,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 7,
+		.active_low		= 1,
 	},
 	{
-		.name = "adsl",
-		.gpio = 8,
-		.active_low = 1,
+		.name			= "adsl",
+		.gpio			= 8,
+		.active_low		= 1,
 	},
 	{
-		.name = "wifi",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "wifi",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 	{
-		.name = "power",
-		.gpio = 14,
-		.active_low = 1,
-		.default_trigger = "default-on",
+		.name			= "power",
+		.gpio			= 14,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
 	},
 };
 
 static struct gpio_led fb_sl_leds[] = {
 	{
-		.name = "1",
-		.gpio = 7,
+		.name			= "1",
+		.gpio			= 7,
 	},
 	{
-		.name = "2",
-		.gpio = 13,
-		.active_low = 1,
+		.name			= "2",
+		.gpio			= 13,
+		.active_low		= 1,
 	},
 	{
-		.name = "3",
-		.gpio = 10,
-		.active_low = 1,
+		.name			= "3",
+		.gpio			= 10,
+		.active_low		= 1,
 	},
 	{
-		.name = "4",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "4",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 	{
-		.name = "5",
-		.gpio = 9,
-		.active_low = 1,
+		.name			= "5",
+		.gpio			= 9,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led fb_fon_leds[] = {
 	{
-		.name = "1",
-		.gpio = 8,
+		.name			= "1",
+		.gpio			= 8,
 	},
 	{
-		.name = "2",
-		.gpio = 3,
-		.active_low = 1,
+		.name			= "2",
+		.gpio			= 3,
+		.active_low		= 1,
 	},
 	{
-		.name = "3",
-		.gpio = 5,
+		.name			= "3",
+		.gpio			= 5,
 	},
 	{
-		.name = "4",
-		.gpio = 4,
-		.active_low = 1,
+		.name			= "4",
+		.gpio			= 4,
+		.active_low		= 1,
 	},
 	{
-		.name = "5",
-		.gpio = 11,
-		.active_low = 1,
+		.name			= "5",
+		.gpio			= 11,
+		.active_low		= 1,
 	},
 };
 
@@ -404,69 +473,11 @@ static struct gpio_led_platform_data ar7_led_data;
 
 static struct platform_device ar7_gpio_leds = {
 	.name = "leds-gpio",
-	.id = -1,
 	.dev = {
 		.platform_data = &ar7_led_data,
 	}
 };
 
-static struct platform_device ar7_udc = {
-	.id = -1,
-	.name = "ar7_udc",
-	.resource = usb_res,
-	.num_resources = ARRAY_SIZE(usb_res),
-};
-
-static struct resource ar7_wdt_res = {
-	.name = "regs",
-	.start = -1, /* Filled at runtime */
-	.end = -1, /* Filled at runtime */
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ar7_wdt = {
-	.id = -1,
-	.name  = "ar7_wdt",
-	.resource = &ar7_wdt_res,
-	.num_resources = 1,
-};
-
-static inline unsigned char char2hex(char h)
-{
-	switch (h) {
-	case '0': case '1': case '2': case '3': case '4':
-	case '5': case '6': case '7': case '8': case '9':
-		return h - '0';
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-		return h - 'A' + 10;
-	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
-		return h - 'a' + 10;
-	default:
-		return 0;
-	}
-}
-
-static void cpmac_get_mac(int instance, unsigned char *dev_addr)
-{
-	int i;
-	char name[5], default_mac[ETH_ALEN], *mac;
-
-	mac = NULL;
-	sprintf(name, "mac%c", 'a' + instance);
-	mac = prom_getenv(name);
-	if (!mac) {
-		sprintf(name, "mac%c", 'a');
-		mac = prom_getenv(name);
-	}
-	if (!mac) {
-		random_ether_addr(default_mac);
-		mac = default_mac;
-	}
-	for (i = 0; i < 6; i++)
-		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
-			char2hex(mac[i * 3 + 1]);
-}
-
 static void __init detect_leds(void)
 {
 	char *prid, *usb_prod;
@@ -499,111 +510,141 @@ static void __init detect_leds(void)
 	}
 }
 
-static int __init ar7_register_devices(void)
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct resource ar7_wdt_res = {
+	.name		= "regs",
+	.flags		= IORESOURCE_MEM,
+	.start		= -1,	/* Filled at runtime */
+	.end		= -1,	/* Filled at runtime */
+};
+
+static struct platform_device ar7_wdt = {
+	.name		= "ar7_wdt",
+	.resource	= &ar7_wdt_res,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * Init
+ ****************************************************************************/
+static int __init ar7_register_uarts(void)
 {
-	u16 chip_id;
-	int res;
-	u32 *bootcr, val;
 #ifdef CONFIG_SERIAL_8250
-	static struct uart_port uart_port[2] __initdata;
-
-	memset(uart_port, 0, sizeof(struct uart_port) * 2);
-
-	uart_port[0].type = PORT_16550A;
-	uart_port[0].line = 0;
-	uart_port[0].irq = AR7_IRQ_UART0;
-	uart_port[0].uartclk = ar7_bus_freq() / 2;
-	uart_port[0].iotype = UPIO_MEM32;
-	uart_port[0].mapbase = AR7_REGS_UART0;
-	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
-	uart_port[0].regshift = 2;
-	res = early_serial_setup(&uart_port[0]);
+	static struct uart_port uart_port __initdata;
+	struct clk *bus_clk;
+	int res;
+
+	memset(&uart_port, 0, sizeof(struct uart_port));
+
+	bus_clk = clk_get(NULL, "bus");
+	if (IS_ERR(bus_clk))
+		panic("unable to get bus clk\n");
+
+	uart_port.type		= PORT_AR7;
+	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
+	uart_port.iotype	= UPIO_MEM32;
+	uart_port.regshift	= 2;
+
+	uart_port.line		= 0;
+	uart_port.irq		= AR7_IRQ_UART0;
+	uart_port.mapbase	= AR7_REGS_UART0;
+	uart_port.membase	= ioremap(uart_port.mapbase, 256);
+
+	res = early_serial_setup(&uart_port);
 	if (res)
 		return res;
 
-
 	/* Only TNETD73xx have a second serial port */
 	if (ar7_has_second_uart()) {
-		uart_port[1].type = PORT_16550A;
-		uart_port[1].line = 1;
-		uart_port[1].irq = AR7_IRQ_UART1;
-		uart_port[1].uartclk = ar7_bus_freq() / 2;
-		uart_port[1].iotype = UPIO_MEM32;
-		uart_port[1].mapbase = UR8_REGS_UART1;
-		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
-		uart_port[1].regshift = 2;
-		res = early_serial_setup(&uart_port[1]);
+		uart_port.line		= 1;
+		uart_port.irq		= AR7_IRQ_UART1;
+		uart_port.mapbase	= UR8_REGS_UART1;
+		uart_port.membase	= ioremap(uart_port.mapbase, 256);
+
+		res = early_serial_setup(&uart_port);
 		if (res)
 			return res;
 	}
-#endif /* CONFIG_SERIAL_8250 */
+#endif
+
+	return 0;
+}
+
+static int __init ar7_register_devices(void)
+{
+	void __iomem *bootcr;
+	u32 val;
+	int res;
+
+	res = ar7_register_uarts();
+	if (res)
+		pr_err("unable to setup uart(s): %d\n", res);
+
 	res = platform_device_register(&physmap_flash);
 	if (res)
-		return res;
+		pr_warning("unable to register physmap-flash: %d\n", res);
 
 	ar7_device_disable(vlynq_low_data.reset_bit);
 	res = platform_device_register(&vlynq_low);
 	if (res)
-		return res;
+		pr_warning("unable to register vlynq-low: %d\n", res);
 
 	if (ar7_has_high_vlynq()) {
 		ar7_device_disable(vlynq_high_data.reset_bit);
 		res = platform_device_register(&vlynq_high);
 		if (res)
-			return res;
+			pr_warning("unable to register vlynq-high: %d\n", res);
 	}
 
 	if (ar7_has_high_cpmac()) {
 		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-		if (res && res != -ENODEV)
-			return res;
-		cpmac_get_mac(1, cpmac_high_data.dev_addr);
-		res = platform_device_register(&cpmac_high);
-		if (res)
-			return res;
-	} else {
+		if (!res) {
+			cpmac_get_mac(1, cpmac_high_data.dev_addr);
+
+			res = platform_device_register(&cpmac_high);
+			if (res)
+				pr_warning("unable to register cpmac-high: %d\n", res);
+		} else
+			pr_warning("unable to add cpmac-high phy: %d\n", res);
+	} else
 		cpmac_low_data.phy_mask = 0xffffffff;
-	}
 
 	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-	if (res && res != -ENODEV)
-		return res;
-
-	cpmac_get_mac(0, cpmac_low_data.dev_addr);
-	res = platform_device_register(&cpmac_low);
-	if (res)
-		return res;
+	if (!res) {
+		cpmac_get_mac(0, cpmac_low_data.dev_addr);
+		res = platform_device_register(&cpmac_low);
+		if (res)
+			pr_warning("unable to register cpmac-low: %d\n", res);
+	} else
+		pr_warning("unable to add cpmac-low phy: %d\n", res);
 
 	detect_leds();
 	res = platform_device_register(&ar7_gpio_leds);
 	if (res)
-		return res;
+		pr_warning("unable to register leds: %d\n", res);
 
 	res = platform_device_register(&ar7_udc);
+	if (res)
+		pr_warning("unable to register usb slave: %d\n", res);
 
-	chip_id = ar7_chip_id();
-	switch (chip_id) {
-	case AR7_CHIP_7100:
-	case AR7_CHIP_7200:
-		ar7_wdt_res.start = AR7_REGS_WDT;
-		break;
-	case AR7_CHIP_7300:
-		ar7_wdt_res.start = UR8_REGS_WDT;
-		break;
-	default:
-		break;
-	}
-
-	ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
-
-	bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
-	val = *bootcr;
+	/* Register watchdog only if enabled in hardware */
+	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
+	val = readl(bootcr);
 	iounmap(bootcr);
+	if (val & AR7_WDT_HW_ENA) {
+		if (ar7_has_high_vlynq())
+			ar7_wdt_res.start = UR8_REGS_WDT;
+		else
+			ar7_wdt_res.start = AR7_REGS_WDT;
 
-	/* Register watchdog only if enabled in hardware */
-	if (val & AR7_WDT_HW_ENA)
+		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 		res = platform_device_register(&ar7_wdt);
+		if (res)
+			pr_warning("unable to register watchdog: %d\n", res);
+	}
 
-	return res;
+	return 0;
 }
-arch_initcall(ar7_register_devices);
+device_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
index c1fdd36..5238579 100644
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -32,8 +32,8 @@
 #define MAX_ENTRY 80
 
 struct env_var {
-	char *name;
-	char *value;
+	char	*name;
+	char	*value;
 };
 
 static struct env_var adam2_env[MAX_ENTRY];
@@ -41,6 +41,7 @@ static struct env_var adam2_env[MAX_ENTRY];
 char *prom_getenv(const char *name)
 {
 	int i;
+
 	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
 		if (!strcmp(name, adam2_env[i].name))
 			return adam2_env[i].value;
@@ -49,65 +50,50 @@ char *prom_getenv(const char *name)
 }
 EXPORT_SYMBOL(prom_getenv);
 
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
 static void  __init ar7_init_cmdline(int argc, char *argv[])
 {
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
+	int i;
 
-	cp = &(arcs_cmdline[0]);
-	while (actr < argc) {
-		strcpy(cp, argv[actr]);
-		cp += strlen(argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) {
-		/* get rid of trailing space */
-		--cp;
-		*cp = '\0';
+	for (i = 1; i < argc; i++) {
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+		if (i < (argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 }
 
 struct psbl_rec {
-	u32 psbl_size;
-	u32 env_base;
-	u32 env_size;
-	u32 ffs_base;
-	u32 ffs_size;
+	u32	psbl_size;
+	u32	env_base;
+	u32	env_size;
+	u32	ffs_base;
+	u32	ffs_size;
 };
 
 static __initdata char psp_env_version[] = "TIENV0.8";
 
 struct psp_env_chunk {
-	u8 num;
-	u8 ctrl;
-	u16 csum;
-	u8 len;
-	char data[11];
+	u8	num;
+	u8	ctrl;
+	u16	csum;
+	u8	len;
+	char	data[11];
 } __attribute__ ((packed));
 
 struct psp_var_map_entry {
-	u8 num;
-	char *value;
+	u8	num;
+	char	*value;
 };
 
 static struct psp_var_map_entry psp_var_map[] = {
-	{ 1, "cpufrequency" },
-	{ 2, "memsize" },
-	{ 3, "flashsize" },
-	{ 4, "modetty0" },
-	{ 5, "modetty1" },
-	{ 8, "maca" },
-	{ 9, "macb" },
-	{ 28, "sysfrequency" },
-	{ 38, "mipsfrequency" },
+	{  1,	"cpufrequency" },
+	{  2,	"memsize" },
+	{  3,	"flashsize" },
+	{  4,	"modetty0" },
+	{  5,	"modetty1" },
+	{  8,	"maca" },
+	{  9,	"macb" },
+	{ 28,	"sysfrequency" },
+	{ 38,	"mipsfrequency" },
 };
 
 /*
@@ -154,6 +140,7 @@ static char * __init lookup_psp_var_map(u8 num)
 static void __init add_adam2_var(char *name, char *value)
 {
 	int i;
+
 	for (i = 0; i < MAX_ENTRY; i++) {
 		if (!adam2_env[i].name) {
 			adam2_env[i].name = name;
@@ -216,7 +203,7 @@ static void __init console_config(void)
 	char parity = '\0', bits = '\0', flow = '\0';
 	char *s, *p;
 
-	if (strstr(prom_getcmdline(), "console="))
+	if (strstr(arcs_cmdline, "console="))
 		return;
 
 	s = prom_getenv("modetty0");
@@ -250,7 +237,7 @@ static void __init console_config(void)
 	else
 		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
 			bits);
-	strcat(prom_getcmdline(), console_string);
+	strlcat(arcs_cmdline, console_string, COMMAND_LINE_SIZE);
 #endif
 }
 
@@ -279,4 +266,3 @@ int prom_putchar(char c)
 	serial_out(UART_TX, c);
 	return 1;
 }
-
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
index 39f6b5b..3a801d2 100644
--- a/arch/mips/ar7/setup.c
+++ b/arch/mips/ar7/setup.c
@@ -26,8 +26,8 @@
 
 static void ar7_machine_restart(char *command)
 {
-	u32 *softres_reg = ioremap(AR7_REGS_RESET +
-					  AR7_RESET_SOFTWARE, 1);
+	u32 *softres_reg = ioremap(AR7_REGS_RESET + AR7_RESET_SOFTWARE, 1);
+
 	writel(1, softres_reg);
 }
 
@@ -41,6 +41,7 @@ static void ar7_machine_power_off(void)
 {
 	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
 	u32 power_state = readl(power_reg) | (3 << 30);
+
 	writel(power_state, power_reg);
 	ar7_machine_halt();
 }
@@ -49,14 +50,14 @@ const char *get_system_type(void)
 {
 	u16 chip_id = ar7_chip_id();
 	switch (chip_id) {
-	case AR7_CHIP_7300:
-		return "TI AR7 (TNETD7300)";
 	case AR7_CHIP_7100:
 		return "TI AR7 (TNETD7100)";
 	case AR7_CHIP_7200:
 		return "TI AR7 (TNETD7200)";
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
 	default:
-		return "TI AR7 (Unknown)";
+		return "TI AR7 (unknown)";
 	}
 }
 
@@ -70,7 +71,6 @@ console_initcall(ar7_init_console);
  * Initializes basic routines and structures pointers, memory size (as
  * given by the bios and saves the command line.
  */
-
 void __init plat_mem_setup(void)
 {
 	unsigned long io_base;
@@ -88,6 +88,5 @@ void __init plat_mem_setup(void)
 	prom_meminit();
 
 	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
-					get_system_type(),
-		ar7_chip_id(), ar7_chip_rev());
+			get_system_type(), ar7_chip_id(), ar7_chip_rev());
 }
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index a1fba89..5fb8a01 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -20,11 +20,21 @@
 
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/time.h>
 #include <asm/mach-ar7/ar7.h>
 
 void __init plat_time_init(void)
 {
-	mips_hpt_frequency = ar7_cpu_freq() / 2;
+	struct clk *cpu_clk;
+
+	cpu_clk = clk_get(NULL, "cpu");
+	if (IS_ERR(cpu_clk)) {
+		printk(KERN_ERR "unable to get cpu clock\n");
+		return;
+	}
+
+	mips_hpt_frequency = clk_get_rate(cpu_clk) / 2;
 }
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 35294b1..7465e8a 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,4 +3,4 @@
 # under Linux.
 #
 
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index 9b79880..e4a5ee9 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -59,4 +59,3 @@ int gpio_to_irq(unsigned gpio)
 		return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(gpio_to_irq);
-
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
new file mode 100644
index 0000000..06e03b2
--- /dev/null
+++ b/arch/mips/bcm47xx/nvram.c
@@ -0,0 +1,94 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+static char nvram_buf[NVRAM_SPACE];
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+	struct nvram_header *header;
+	int i;
+	u32 base, lim, off;
+	u32 *src, *dst;
+
+	base = mcore->flash_window;
+	lim = mcore->flash_window_size;
+
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		header = (struct nvram_header *)
+			KSEG1ADDR(base + off - NVRAM_SPACE);
+		if (header->magic == NVRAM_HEADER)
+			goto found;
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	return;
+
+found:
+	src = (u32 *) header;
+	dst = (u32 *) nvram_buf;
+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+		*dst++ = *src++;
+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+		*dst++ = le32_to_cpu(*src++);
+}
+
+int nvram_getenv(char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+
+	if (!name)
+		return 1;
+
+	if (!nvram_buf[0])
+		early_nvram_init();
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf) - 2;
+	end[0] = end[1] = '\0';
+	for (; *var; var = value + strlen(value) + 1) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if ((eq - var) == strlen(name) &&
+			strncmp(var, name, (eq - var)) == 0) {
+			snprintf(val, val_len, "%s", value);
+			return 0;
+		}
+	}
+	return 1;
+}
+EXPORT_SYMBOL(nvram_getenv);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index c51405e..0fa646c 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -141,6 +141,14 @@ static __init void prom_init_mem(void)
 			break;
 	}
 
+	/* Ignoring the last page when ddr size is 128M. Cached
+	 * accesses to last page is causing the processor to prefetch
+	 * using address above 128M stepping out of the ddr address
+	 * space.
+	 */
+	if (mem == 0x8000000)
+		mem -= 0x1000;
+
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 
@@ -155,4 +163,3 @@ void __init prom_init(void)
 void __init prom_free_prom_memory(void)
 {
 }
-
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 2f580fa..b1aee33 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -1,8 +1,8 @@
 /*
  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -33,6 +33,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <asm/fw/cfe/cfe_api.h>
+#include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
 EXPORT_SYMBOL(ssb_bcm47xx);
@@ -81,28 +82,42 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
 	/* Fill sprom structure */
 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
 	iv->sprom.revision = 3;
 
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et0mac);
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et1mac);
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
 
 	return 0;
@@ -121,4 +136,3 @@ void __init plat_mem_setup(void)
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
 }
-
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index ef00e7f..74d0696 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -164,4 +164,3 @@ static int __init wgt634u_init(void)
 }
 
 module_init(wgt634u_init);
-
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 1fe412c..8dba8cf 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -18,6 +18,7 @@
 #include <asm/addrspace.h>
 #include <bcm63xx_board.h>
 #include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
 #include <bcm63xx_dev_pci.h>
@@ -40,6 +41,7 @@ static struct board_info __initdata board_96338gw = {
 	.name				= "96338GW",
 	.expected_cpu_id		= 0x6338,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.enet0 = {
 		.force_speed_100	= 1,
@@ -82,6 +84,7 @@ static struct board_info __initdata board_96338w = {
 	.name				= "96338W",
 	.expected_cpu_id		= 0x6338,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.enet0 = {
 		.force_speed_100	= 1,
@@ -126,6 +129,8 @@ static struct board_info __initdata board_96338w = {
 static struct board_info __initdata board_96345gw2 = {
 	.name				= "96345GW2",
 	.expected_cpu_id		= 0x6345,
+
+	.has_uart0			= 1,
 };
 #endif
 
@@ -137,6 +142,7 @@ static struct board_info __initdata board_96348r = {
 	.name				= "96348R",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_pci			= 1,
 
@@ -180,6 +186,7 @@ static struct board_info __initdata board_96348gw_10 = {
 	.name				= "96348GW-10",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -239,6 +246,7 @@ static struct board_info __initdata board_96348gw_11 = {
 	.name				= "96348GW-11",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -292,6 +300,7 @@ static struct board_info __initdata board_96348gw = {
 	.name				= "96348GW",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -349,9 +358,10 @@ static struct board_info __initdata board_FAST2404 = {
 	.name				= "F@ST2404",
 	.expected_cpu_id		= 0x6348,
 
-	.has_enet0			= 1,
-	.has_enet1			= 1,
-	.has_pci			= 1,
+	.has_uart0			= 1,
+        .has_enet0			= 1,
+        .has_enet1			= 1,
+        .has_pci			= 1,
 
 	.enet0 = {
 		.has_phy		= 1,
@@ -368,10 +378,30 @@ static struct board_info __initdata board_FAST2404 = {
 	.has_ehci0			= 1,
 };
 
+static struct board_info __initdata board_rta1025w_16 = {
+	.name				= "RTA1025W_16",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+};
+
+
 static struct board_info __initdata board_DV201AMR = {
 	.name				= "DV201AMR",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_pci			= 1,
 	.has_ohci0			= 1,
 
@@ -391,6 +421,7 @@ static struct board_info __initdata board_96348gw_a = {
 	.name				= "96348GW-A",
 	.expected_cpu_id		= 0x6348,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -416,6 +447,7 @@ static struct board_info __initdata board_96358vw = {
 	.name				= "96358VW",
 	.expected_cpu_id		= 0x6358,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -467,6 +499,7 @@ static struct board_info __initdata board_96358vw2 = {
 	.name				= "96358VW2",
 	.expected_cpu_id		= 0x6358,
 
+	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.has_enet1			= 1,
 	.has_pci			= 1,
@@ -514,6 +547,7 @@ static struct board_info __initdata board_AGPFS0 = {
 	.name                           = "AGPF-S0",
 	.expected_cpu_id                = 0x6358,
 
+	.has_uart0			= 1,
 	.has_enet0                      = 1,
 	.has_enet1                      = 1,
 	.has_pci                        = 1,
@@ -531,6 +565,27 @@ static struct board_info __initdata board_AGPFS0 = {
 	.has_ohci0 = 1,
 	.has_ehci0 = 1,
 };
+
+static struct board_info __initdata board_DWVS0 = {
+	.name				= "DWV-S0",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+};
 #endif
 
 /*
@@ -552,16 +607,88 @@ static const struct board_info __initdata *bcm963xx_boards[] = {
 	&board_FAST2404,
 	&board_DV201AMR,
 	&board_96348gw_a,
+	&board_rta1025w_16,
 #endif
 
 #ifdef CONFIG_BCM63XX_CPU_6358
 	&board_96358vw,
 	&board_96358vw2,
 	&board_AGPFS0,
+	&board_DWVS0,
 #endif
 };
 
 /*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+	.revision		= 0x02,
+	.board_rev		= 0x17,
+	.country_code		= 0x0,
+	.ant_available_bg 	= 0x3,
+	.pa0b0			= 0x15ae,
+	.pa0b1			= 0xfa85,
+	.pa0b2			= 0xfe8d,
+	.pa1b0			= 0xffff,
+	.pa1b1			= 0xffff,
+	.pa1b2			= 0xffff,
+	.gpio0			= 0xff,
+	.gpio1			= 0xff,
+	.gpio2			= 0xff,
+	.gpio3			= 0xff,
+	.maxpwr_bg		= 0x004c,
+	.itssi_bg		= 0x00,
+	.boardflags_lo		= 0x2848,
+	.boardflags_hi		= 0x0000,
+};
+#endif
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+	return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+	u8 *p;
+	int count;
+
+	if (mac_addr_used >= nvram.mac_addr_count) {
+		printk(KERN_ERR PFX "not enough mac address\n");
+		return -ENODEV;
+	}
+
+	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+	p = mac + ETH_ALEN - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != mac);
+	}
+
+	if (p == mac) {
+		printk(KERN_ERR PFX "unable to fetch mac address\n");
+		return -ENODEV;
+	}
+
+	mac_addr_used++;
+	return 0;
+}
+
+/*
  * early init callback, read nvram data from flash and checksum it
  */
 void __init board_prom_init(void)
@@ -659,6 +786,17 @@ void __init board_prom_init(void)
 	}
 
 	bcm_gpio_writel(val, GPIO_MODE_REG);
+
+	/* Generate MAC address for WLAN and
+	 * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+			printk(KERN_ERR "failed to register fallback SPROM\n");
+	}
+#endif
 }
 
 /*
@@ -676,49 +814,6 @@ void __init board_setup(void)
 		panic("unexpected CPU for bcm963xx board");
 }
 
-/*
- * return board name for /proc/cpuinfo
- */
-const char *board_get_name(void)
-{
-	return board.name;
-}
-
-/*
- * register & return a new board mac address
- */
-static int board_get_mac_address(u8 *mac)
-{
-	u8 *p;
-	int count;
-
-	if (mac_addr_used >= nvram.mac_addr_count) {
-		printk(KERN_ERR PFX "not enough mac address\n");
-		return -ENODEV;
-	}
-
-	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
-	p = mac + ETH_ALEN - 1;
-	count = mac_addr_used;
-
-	while (count--) {
-		do {
-			(*p)++;
-			if (*p != 0)
-				break;
-			p--;
-		} while (p != mac);
-	}
-
-	if (p == mac) {
-		printk(KERN_ERR PFX "unable to fetch mac address\n");
-		return -ENODEV;
-	}
-
-	mac_addr_used++;
-	return 0;
-}
-
 static struct mtd_partition mtd_partitions[] = {
 	{
 		.name		= "cfe",
@@ -750,33 +845,6 @@ static struct platform_device mtd_dev = {
 	},
 };
 
-/*
- * Register a sane SPROMv2 to make the on-board
- * bcm4318 WLAN work
- */
-#ifdef CONFIG_SSB_PCIHOST
-static struct ssb_sprom bcm63xx_sprom = {
-	.revision		= 0x02,
-	.board_rev		= 0x17,
-	.country_code		= 0x0,
-	.ant_available_bg 	= 0x3,
-	.pa0b0			= 0x15ae,
-	.pa0b1			= 0xfa85,
-	.pa0b2			= 0xfe8d,
-	.pa1b0			= 0xffff,
-	.pa1b1			= 0xffff,
-	.pa1b2			= 0xffff,
-	.gpio0			= 0xff,
-	.gpio1			= 0xff,
-	.gpio2			= 0xff,
-	.gpio3			= 0xff,
-	.maxpwr_bg		= 0x004c,
-	.itssi_bg		= 0x00,
-	.boardflags_lo		= 0x2848,
-	.boardflags_hi		= 0x0000,
-};
-#endif
-
 static struct gpio_led_platform_data bcm63xx_led_data;
 
 static struct platform_device bcm63xx_gpio_leds = {
@@ -792,6 +860,12 @@ int __init board_register_devices(void)
 {
 	u32 val;
 
+	if (board.has_uart0)
+		bcm63xx_uart_register(0);
+
+	if (board.has_uart1)
+		bcm63xx_uart_register(1);
+
 	if (board.has_pccard)
 		bcm63xx_pcmcia_register();
 
@@ -806,17 +880,6 @@ int __init board_register_devices(void)
 	if (board.has_dsp)
 		bcm63xx_dsp_register(&board.dsp);
 
-	/* Generate MAC address for WLAN and
-	 * register our SPROM */
-#ifdef CONFIG_SSB_PCIHOST
-	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
-			printk(KERN_ERR "failed to register fallback SPROM\n");
-	}
-#endif
-
 	/* read base address of boot chip select (0) */
 	if (BCMCPU_IS_6345())
 		val = 0x1fc00000;
@@ -836,4 +899,3 @@ int __init board_register_devices(void)
 
 	return 0;
 }
-
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 70378bb..cbb7caf 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -36,6 +36,7 @@ static const unsigned long bcm96338_regs_base[] = {
 	[RSET_TIMER]		= BCM_6338_TIMER_BASE,
 	[RSET_WDT]		= BCM_6338_WDT_BASE,
 	[RSET_UART0]		= BCM_6338_UART0_BASE,
+	[RSET_UART1]		= BCM_6338_UART1_BASE,
 	[RSET_GPIO]		= BCM_6338_GPIO_BASE,
 	[RSET_SPI]		= BCM_6338_SPI_BASE,
 	[RSET_OHCI0]		= BCM_6338_OHCI0_BASE,
@@ -72,6 +73,7 @@ static const unsigned long bcm96345_regs_base[] = {
 	[RSET_TIMER]		= BCM_6345_TIMER_BASE,
 	[RSET_WDT]		= BCM_6345_WDT_BASE,
 	[RSET_UART0]		= BCM_6345_UART0_BASE,
+	[RSET_UART1]		= BCM_6345_UART1_BASE,
 	[RSET_GPIO]		= BCM_6345_GPIO_BASE,
 	[RSET_SPI]		= BCM_6345_SPI_BASE,
 	[RSET_UDC0]		= BCM_6345_UDC0_BASE,
@@ -109,6 +111,7 @@ static const unsigned long bcm96348_regs_base[] = {
 	[RSET_TIMER]		= BCM_6348_TIMER_BASE,
 	[RSET_WDT]		= BCM_6348_WDT_BASE,
 	[RSET_UART0]		= BCM_6348_UART0_BASE,
+	[RSET_UART1]		= BCM_6348_UART1_BASE,
 	[RSET_GPIO]		= BCM_6348_GPIO_BASE,
 	[RSET_SPI]		= BCM_6348_SPI_BASE,
 	[RSET_OHCI0]		= BCM_6348_OHCI0_BASE,
@@ -150,6 +153,7 @@ static const unsigned long bcm96358_regs_base[] = {
 	[RSET_TIMER]		= BCM_6358_TIMER_BASE,
 	[RSET_WDT]		= BCM_6358_WDT_BASE,
 	[RSET_UART0]		= BCM_6358_UART0_BASE,
+	[RSET_UART1]		= BCM_6358_UART1_BASE,
 	[RSET_GPIO]		= BCM_6358_GPIO_BASE,
 	[RSET_SPI]		= BCM_6358_SPI_BASE,
 	[RSET_OHCI0]		= BCM_6358_OHCI0_BASE,
@@ -170,6 +174,7 @@ static const unsigned long bcm96358_regs_base[] = {
 static const int bcm96358_irqs[] = {
 	[IRQ_TIMER]		= BCM_6358_TIMER_IRQ,
 	[IRQ_UART0]		= BCM_6358_UART0_IRQ,
+	[IRQ_UART1]		= BCM_6358_UART1_IRQ,
 	[IRQ_DSL]		= BCM_6358_DSL_IRQ,
 	[IRQ_ENET0]		= BCM_6358_ENET0_IRQ,
 	[IRQ_ENET1]		= BCM_6358_ENET1_IRQ,
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
index 9f544ba..39c2336 100644
--- a/arch/mips/bcm63xx/dev-enet.c
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -104,6 +104,9 @@ int __init bcm63xx_enet_register(int unit,
 	if (unit > 1)
 		return -ENODEV;
 
+	if (unit == 1 && BCMCPU_IS_6338())
+		return -ENODEV;
+
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
index b051946..c2963da 100644
--- a/arch/mips/bcm63xx/dev-uart.c
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -11,31 +11,65 @@
 #include <linux/platform_device.h>
 #include <bcm63xx_cpu.h>
 
-static struct resource uart_resources[] = {
+static struct resource uart0_resources[] = {
 	{
-		.start		= -1, /* filled at runtime */
-		.end		= -1, /* filled at runtime */
+		/* start & end filled at runtime */
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= -1, /* filled at runtime */
+		/* start filled at runtime */
 		.flags		= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device bcm63xx_uart_device = {
-	.name		= "bcm63xx_uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(uart_resources),
-	.resource	= uart_resources,
+static struct resource uart1_resources[] = {
+	{
+		/* start & end filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		/* start filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_uart_devices[] = {
+	{
+		.name		= "bcm63xx_uart",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(uart0_resources),
+		.resource	= uart0_resources,
+	},
+
+	{
+		.name		= "bcm63xx_uart",
+		.id		= 1,
+		.num_resources	= ARRAY_SIZE(uart1_resources),
+		.resource	= uart1_resources,
+	}
 };
 
-int __init bcm63xx_uart_register(void)
+int __init bcm63xx_uart_register(unsigned int id)
 {
-	uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
-	uart_resources[0].end = uart_resources[0].start;
-	uart_resources[0].end += RSET_UART_SIZE - 1;
-	uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
-	return platform_device_register(&bcm63xx_uart_device);
+	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+		return -ENODEV;
+
+	if (id == 1 && !BCMCPU_IS_6358())
+		return -ENODEV;
+
+	if (id == 0) {
+		uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+		uart0_resources[0].end = uart0_resources[0].start +
+			RSET_UART_SIZE - 1;
+		uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+	}
+
+	if (id == 1) {
+		uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
+		uart1_resources[0].end = uart1_resources[0].start +
+			RSET_UART_SIZE - 1;
+		uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
+	}
+
+	return platform_device_register(&bcm63xx_uart_devices[id]);
 }
-arch_initcall(bcm63xx_uart_register);
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
index 87ca390..f560fe7 100644
--- a/arch/mips/bcm63xx/gpio.c
+++ b/arch/mips/bcm63xx/gpio.c
@@ -91,7 +91,7 @@ static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
 	tmp = bcm_gpio_readl(reg);
-	if (dir == GPIO_DIR_IN)
+	if (dir == BCM63XX_GPIO_DIR_IN)
 		tmp &= ~mask;
 	else
 		tmp |= mask;
@@ -103,14 +103,14 @@ static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
 
 static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
 }
 
 static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned gpio, int value)
 {
 	bcm63xx_gpio_set(chip, gpio, value);
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
 }
 
 
@@ -125,10 +125,10 @@ static struct gpio_chip bcm63xx_gpio_chip = {
 
 int __init bcm63xx_gpio_init(void)
 {
+	gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
+	gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
 	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
 	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
 
 	return gpiochip_add(&bcm63xx_gpio_chip);
 }
-
-arch_initcall(bcm63xx_gpio_init);
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index ba522bd..5f11359 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -17,8 +17,8 @@
 #include <bcm63xx_timer.h>
 #include <bcm63xx_regs.h>
 
-static DEFINE_SPINLOCK(timer_reg_lock);
-static DEFINE_SPINLOCK(timer_data_lock);
+static DEFINE_RAW_SPINLOCK(timer_reg_lock);
+static DEFINE_RAW_SPINLOCK(timer_data_lock);
 static struct clk *periph_clk;
 
 static struct timer_data {
@@ -31,23 +31,23 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	u32 stat;
 	int i;
 
-	spin_lock(&timer_reg_lock);
+	raw_spin_lock(&timer_reg_lock);
 	stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
 	bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
-	spin_unlock(&timer_reg_lock);
+	raw_spin_unlock(&timer_reg_lock);
 
 	for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
 		if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
 			continue;
 
-		spin_lock(&timer_data_lock);
+		raw_spin_lock(&timer_data_lock);
 		if (!timer_data[i].cb) {
-			spin_unlock(&timer_data_lock);
+			raw_spin_unlock(&timer_data_lock);
 			continue;
 		}
 
 		timer_data[i].cb(timer_data[i].data);
-		spin_unlock(&timer_data_lock);
+		raw_spin_unlock(&timer_data_lock);
 	}
 
 	return IRQ_HANDLED;
@@ -61,7 +61,7 @@ int bcm63xx_timer_enable(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 	reg |= TIMER_CTL_ENABLE_MASK;
@@ -71,7 +71,7 @@ int bcm63xx_timer_enable(int id)
 	reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
 	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 
@@ -85,7 +85,7 @@ int bcm63xx_timer_disable(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 	reg &= ~TIMER_CTL_ENABLE_MASK;
@@ -95,7 +95,7 @@ int bcm63xx_timer_disable(int id)
 	reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
 	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 
@@ -110,7 +110,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
 		return -EINVAL;
 
 	ret = 0;
-	spin_lock_irqsave(&timer_data_lock, flags);
+	raw_spin_lock_irqsave(&timer_data_lock, flags);
 	if (timer_data[id].cb) {
 		ret = -EBUSY;
 		goto out;
@@ -120,7 +120,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
 	timer_data[id].data = data;
 
 out:
-	spin_unlock_irqrestore(&timer_data_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_data_lock, flags);
 	return ret;
 }
 
@@ -133,9 +133,9 @@ void bcm63xx_timer_unregister(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return;
 
-	spin_lock_irqsave(&timer_data_lock, flags);
+	raw_spin_lock_irqsave(&timer_data_lock, flags);
 	timer_data[id].cb = NULL;
-	spin_unlock_irqrestore(&timer_data_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_data_lock, flags);
 }
 
 EXPORT_SYMBOL(bcm63xx_timer_unregister);
@@ -159,7 +159,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 	if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 
 	if (monotonic)
@@ -171,7 +171,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 	reg |= countdown;
 	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 9df903d..790ddd3 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -9,7 +9,7 @@
 # modified by Cort (cort@cs.nmt.edu)
 #
 # Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
-# Author: Wu Zhangjin <wuzj@lemote.com>
+# Author: Wu Zhangjin <wuzhangjin@gmail.com>
 #
 
 # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
@@ -27,15 +27,18 @@ BOOT_HEAP_SIZE := 0x400000
 KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
 
 KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
 
 KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
-	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
 
 obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
 
+ifdef CONFIG_DEBUG_ZBOOT
 obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+obj-$(CONFIG_MACH_ALCHEMY)		   += $(obj)/uart-alchemy.o
+endif
 
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE)
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
index ff4dc7a..134a616 100644
--- a/arch/mips/boot/compressed/dbg.c
+++ b/arch/mips/boot/compressed/dbg.c
@@ -5,11 +5,11 @@
  * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
  * need to implement your own putc().
  */
-
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/types.h>
 
-void __attribute__ ((weak)) putc(char c)
+void __weak putc(char c)
 {
 }
 
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 55d02b3..5db43c5 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -5,8 +5,8 @@
  * Author: Matt Porter <mporter@mvista.com> Derived from
  * arch/ppc/boot/prep/misc.c
  *
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c
new file mode 100644
index 0000000..1bff22f
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-alchemy.c
@@ -0,0 +1,7 @@
+#include <asm/mach-au1x00/au1000.h>
+
+void putc(char c)
+{
+	/* all current (Jan. 2010) in-kernel boards */
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 4b92bfc..be531ec 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -41,7 +41,7 @@ struct bar1_index_state {
 };
 
 #ifdef CONFIG_PCI
-static DEFINE_SPINLOCK(bar1_lock);
+static DEFINE_RAW_SPINLOCK(bar1_lock);
 static struct bar1_index_state bar1_state[32];
 #endif
 
@@ -198,7 +198,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
 		start_index = 31;
 
 	/* Only one processor can access the Bar register at once */
-	spin_lock_irqsave(&bar1_lock, flags);
+	raw_spin_lock_irqsave(&bar1_lock, flags);
 
 	/* Look through Bar1 for existing mapping that will work */
 	for (index = start_index; index >= 0; index--) {
@@ -250,7 +250,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
 	       (unsigned long long) physical);
 
 done_unlock:
-	spin_unlock_irqrestore(&bar1_lock, flags);
+	raw_spin_unlock_irqrestore(&bar1_lock, flags);
 done:
 	pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result);
 	return result;
@@ -324,14 +324,14 @@ void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 		      "Attempt to unmap an invalid address (0x%llx)\n",
 		      dma_addr);
 
-	spin_lock_irqsave(&bar1_lock, flags);
+	raw_spin_lock_irqsave(&bar1_lock, flags);
 	bar1_state[index].ref_count--;
 	if (bar1_state[index].ref_count == 0)
 		octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
 	else if (unlikely(bar1_state[index].ref_count < 0))
 		panic("dma_unmap_single: Bar1[%u] reference count < 0\n",
 		      (int) index);
-	spin_unlock_irqrestore(&bar1_lock, flags);
+	raw_spin_unlock_irqrestore(&bar1_lock, flags);
 done:
 	pr_debug("dma_unmap_single 0x%llx\n", dma_addr);
 	return;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 25666da..fdf5f19 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -253,7 +253,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 	 * impossible requests up front. (NOP for address_min == 0)
 	 */
 	if (alignment)
-		address_min = __ALIGN_MASK(address_min, (alignment - 1));
+		address_min = ALIGN(address_min, alignment);
 
 	/*
 	 * Reject inconsistent args.  We have adjusted these, so this
@@ -291,7 +291,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 		 * satisfy request.
 		 */
 		usable_base =
-		    __ALIGN_MASK(max(address_min, ent_addr), alignment - 1);
+		    ALIGN(max(address_min, ent_addr), alignment);
 		usable_max = min(address_max, ent_addr + ent_size);
 		/*
 		 * We should be able to allocate block at address
@@ -671,7 +671,7 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
 	 * coallesced when they are freed.  The alloc routine does the
 	 * same rounding up on all allocations.
 	 */
-	size = __ALIGN_MASK(size, (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1));
+	size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE);
 
 	addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr,
 						alignment,
diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
index e583889..8b18a20 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -115,4 +115,3 @@ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 
 	return 1;
 }
-
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 6f2acf0..c424cd1 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -13,9 +13,8 @@
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 
-DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
-DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
-DEFINE_SPINLOCK(octeon_irq_msi_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock);
 
 static int octeon_coreid_for_cpu(int cpu)
 {
@@ -51,9 +50,6 @@ static void octeon_irq_core_eoi(unsigned int irq)
 	 */
 	if (desc->status & IRQ_DISABLED)
 		return;
-
-	/* There is a race here.  We should fix it.  */
-
 	/*
 	 * We don't need to disable IRQs to make these atomic since
 	 * they are already disabled earlier in the low level
@@ -141,19 +137,12 @@ static void octeon_irq_ciu0_enable(unsigned int irq)
 	uint64_t en0;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
 
-	/*
-	 * A read lock is used here to make sure only one core is ever
-	 * updating the CIU enable bits at a time. During an enable
-	 * the cores don't interfere with each other. During a disable
-	 * the write lock stops any enables that might cause a
-	 * problem.
-	 */
-	read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
 	en0 |= 1ull << bit;
 	cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
-	read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 }
 
 static void octeon_irq_ciu0_disable(unsigned int irq)
@@ -162,7 +151,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 	unsigned long flags;
 	uint64_t en0;
 	int cpu;
-	write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
@@ -174,7 +163,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
-	write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 }
 
 /*
@@ -193,7 +182,7 @@ static void octeon_irq_ciu0_enable_v2(unsigned int irq)
  * Disable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu0_disable_v2(unsigned int irq)
+static void octeon_irq_ciu0_ack_v2(unsigned int irq)
 {
 	int index = cvmx_get_core_num() * 2;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
@@ -202,6 +191,43 @@ static void octeon_irq_ciu0_disable_v2(unsigned int irq)
 }
 
 /*
+ * CIU timer type interrupts must be acknoleged by writing a '1' bit
+ * to their sum0 bit.
+ */
+static void octeon_irq_ciu0_timer_ack(unsigned int irq)
+{
+	int index = cvmx_get_core_num() * 2;
+	uint64_t mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+	cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
+}
+
+static void octeon_irq_ciu0_timer_ack_v1(unsigned int irq)
+{
+	octeon_irq_ciu0_timer_ack(irq);
+	octeon_irq_ciu0_ack(irq);
+}
+
+static void octeon_irq_ciu0_timer_ack_v2(unsigned int irq)
+{
+	octeon_irq_ciu0_timer_ack(irq);
+	octeon_irq_ciu0_ack_v2(irq);
+}
+
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_eoi_v2(unsigned int irq)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	int index = cvmx_get_core_num() * 2;
+	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
+	if ((desc->status & IRQ_DISABLED) == 0)
+		cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+}
+
+/*
  * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
  * registers.
  */
@@ -223,7 +249,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
 
-	write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en0 =
@@ -239,7 +265,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
-	write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 
 	return 0;
 }
@@ -272,8 +298,8 @@ static struct irq_chip octeon_irq_chip_ciu0_v2 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu0_enable_v2,
 	.disable = octeon_irq_ciu0_disable_all_v2,
-	.ack = octeon_irq_ciu0_disable_v2,
-	.eoi = octeon_irq_ciu0_enable_v2,
+	.ack = octeon_irq_ciu0_ack_v2,
+	.eoi = octeon_irq_ciu0_eoi_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
 #endif
@@ -290,6 +316,28 @@ static struct irq_chip octeon_irq_chip_ciu0 = {
 #endif
 };
 
+static struct irq_chip octeon_irq_chip_ciu0_timer_v2 = {
+	.name = "CIU0-T",
+	.enable = octeon_irq_ciu0_enable_v2,
+	.disable = octeon_irq_ciu0_disable_all_v2,
+	.ack = octeon_irq_ciu0_timer_ack_v2,
+	.eoi = octeon_irq_ciu0_eoi_v2,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
+#endif
+};
+
+static struct irq_chip octeon_irq_chip_ciu0_timer = {
+	.name = "CIU0-T",
+	.enable = octeon_irq_ciu0_enable,
+	.disable = octeon_irq_ciu0_disable,
+	.ack = octeon_irq_ciu0_timer_ack_v1,
+	.eoi = octeon_irq_ciu0_eoi,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu0_set_affinity,
+#endif
+};
+
 
 static void octeon_irq_ciu1_ack(unsigned int irq)
 {
@@ -322,19 +370,12 @@ static void octeon_irq_ciu1_enable(unsigned int irq)
 	uint64_t en1;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
 
-	/*
-	 * A read lock is used here to make sure only one core is ever
-	 * updating the CIU enable bits at a time.  During an enable
-	 * the cores don't interfere with each other.  During a disable
-	 * the write lock stops any enables that might cause a
-	 * problem.
-	 */
-	read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
 	en1 |= 1ull << bit;
 	cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
-	read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 }
 
 static void octeon_irq_ciu1_disable(unsigned int irq)
@@ -343,7 +384,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 	unsigned long flags;
 	uint64_t en1;
 	int cpu;
-	write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
@@ -355,7 +396,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
-	write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 }
 
 /*
@@ -374,7 +415,7 @@ static void octeon_irq_ciu1_enable_v2(unsigned int irq)
  * Disable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu1_disable_v2(unsigned int irq)
+static void octeon_irq_ciu1_ack_v2(unsigned int irq)
 {
 	int index = cvmx_get_core_num() * 2 + 1;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
@@ -383,6 +424,20 @@ static void octeon_irq_ciu1_disable_v2(unsigned int irq)
 }
 
 /*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_eoi_v2(unsigned int irq)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	int index = cvmx_get_core_num() * 2 + 1;
+	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+
+	if ((desc->status & IRQ_DISABLED) == 0)
+		cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+}
+
+/*
  * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
  * registers.
  */
@@ -405,7 +460,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq,
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
 
-	write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en1 =
@@ -422,7 +477,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq,
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
-	write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 
 	return 0;
 }
@@ -455,8 +510,8 @@ static struct irq_chip octeon_irq_chip_ciu1_v2 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu1_enable_v2,
 	.disable = octeon_irq_ciu1_disable_all_v2,
-	.ack = octeon_irq_ciu1_disable_v2,
-	.eoi = octeon_irq_ciu1_enable_v2,
+	.ack = octeon_irq_ciu1_ack_v2,
+	.eoi = octeon_irq_ciu1_eoi_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu1_set_affinity_v2,
 #endif
@@ -475,6 +530,8 @@ static struct irq_chip octeon_irq_chip_ciu1 = {
 
 #ifdef CONFIG_PCI_MSI
 
+static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
+
 static void octeon_irq_msi_ack(unsigned int irq)
 {
 	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
@@ -515,12 +572,12 @@ static void octeon_irq_msi_enable(unsigned int irq)
 		 */
 		uint64_t en;
 		unsigned long flags;
-		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
 		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
 		en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
 		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
 		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
 	}
 }
 
@@ -537,12 +594,12 @@ static void octeon_irq_msi_disable(unsigned int irq)
 		 */
 		uint64_t en;
 		unsigned long flags;
-		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
 		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
 		en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
 		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
 		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
 	}
 }
 
@@ -559,6 +616,7 @@ void __init arch_init_irq(void)
 {
 	int irq;
 	struct irq_chip *chip0;
+	struct irq_chip *chip0_timer;
 	struct irq_chip *chip1;
 
 #ifdef CONFIG_SMP
@@ -574,9 +632,11 @@ void __init arch_init_irq(void)
 	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
 	    OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) {
 		chip0 = &octeon_irq_chip_ciu0_v2;
+		chip0_timer = &octeon_irq_chip_ciu0_timer_v2;
 		chip1 = &octeon_irq_chip_ciu1_v2;
 	} else {
 		chip0 = &octeon_irq_chip_ciu0;
+		chip0_timer = &octeon_irq_chip_ciu0_timer;
 		chip1 = &octeon_irq_chip_ciu1;
 	}
 
@@ -590,7 +650,21 @@ void __init arch_init_irq(void)
 
 	/* 24 - 87 CIU_INT_SUM0 */
 	for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
-		set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+		switch (irq) {
+		case OCTEON_IRQ_GMX_DRP0:
+		case OCTEON_IRQ_GMX_DRP1:
+		case OCTEON_IRQ_IPD_DRP:
+		case OCTEON_IRQ_KEY_ZERO:
+		case OCTEON_IRQ_TIMER0:
+		case OCTEON_IRQ_TIMER1:
+		case OCTEON_IRQ_TIMER2:
+		case OCTEON_IRQ_TIMER3:
+			set_irq_chip_and_handler(irq, chip0_timer, handle_percpu_irq);
+			break;
+		default:
+			set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+			break;
+		}
 	}
 
 	/* 88 - 151 CIU_INT_SUM1 */
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index cfdb4c2..62ac30e 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -9,6 +9,7 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
@@ -159,6 +160,90 @@ out:
 }
 device_initcall(octeon_rng_device_init);
 
+static struct i2c_board_info __initdata octeon_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static int __init octeon_i2c_devices_init(void)
+{
+	return i2c_register_board_info(0, octeon_i2c_devices,
+				       ARRAY_SIZE(octeon_i2c_devices));
+}
+arch_initcall(octeon_i2c_devices_init);
+
+#define OCTEON_I2C_IO_BASE 0x1180000001000ull
+#define OCTEON_I2C_IO_UNIT_OFFSET 0x200
+
+static struct octeon_i2c_data octeon_i2c_data[2];
+
+static int __init octeon_i2c_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+	int port, num_ports;
+
+	struct resource i2c_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
+		num_ports = 2;
+	else
+		num_ports = 1;
+
+	for (port = 0; port < num_ports; port++) {
+		octeon_i2c_data[port].sys_freq = octeon_get_clock_rate();
+		/*FIXME: should be examined. At the moment is set for 100Khz */
+		octeon_i2c_data[port].i2c_freq = 100000;
+
+		pd = platform_device_alloc("i2c-octeon", port);
+		if (!pd) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		pd->dev.platform_data = octeon_i2c_data + port;
+
+		i2c_resources[0].start =
+			OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET);
+		i2c_resources[0].end = i2c_resources[0].start + 0x1f;
+		switch (port) {
+		case 0:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI;
+			break;
+		case 1:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI2;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI2;
+			break;
+		default:
+			BUG();
+		}
+
+		ret = platform_device_add_resources(pd,
+						    i2c_resources,
+						    ARRAY_SIZE(i2c_resources));
+		if (ret)
+			goto fail;
+
+		ret = platform_device_add(pd);
+		if (ret)
+			goto fail;
+	}
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_i2c_device_init);
+
 /* Octeon SMI/MDIO interface.  */
 static int __init octeon_mdiobus_device_init(void)
 {
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 8240728..83eac37 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -65,7 +65,11 @@ static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
 	p->type = PORT_OCTEON;
 	p->iotype = UPIO_MEM;
 	p->regshift = 3;	/* I/O addresses are every 8 bytes */
-	p->uartclk = mips_hpt_frequency;
+	if (octeon_is_simulation())
+		/* Make simulator output fast*/
+		p->uartclk = 115200 * 16;
+	else
+		p->uartclk = mips_hpt_frequency;
 	p->serial_in = octeon_serial_in;
 	p->serial_out = octeon_serial_out;
 }
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index b321d3b..d1b5ffa 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -45,9 +45,6 @@ extern struct plat_smp_ops octeon_smp_ops;
 extern void pci_console_init(const char *arg);
 #endif
 
-#ifdef CONFIG_CAVIUM_RESERVE32
-extern uint64_t octeon_reserve32_memory;
-#endif
 static unsigned long long MAX_MEMORY = 512ull << 20;
 
 struct octeon_boot_descriptor *octeon_boot_desc_ptr;
@@ -186,54 +183,6 @@ void octeon_check_cpu_bist(void)
 	write_octeon_c0_dcacheerr(0);
 }
 
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-/**
- * Called on every core to setup the wired tlb entry needed
- * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
- *
- */
-static void octeon_hal_setup_per_cpu_reserved32(void *unused)
-{
-	/*
-	 * The config has selected to wire the reserve32 memory for all
-	 * userspace applications. We need to put a wired TLB entry in for each
-	 * 512MB of reserve32 memory. We only handle double 256MB pages here,
-	 * so reserve32 must be multiple of 512MB.
-	 */
-	uint32_t size = CONFIG_CAVIUM_RESERVE32;
-	uint32_t entrylo0 =
-		0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
-	uint32_t entrylo1 = entrylo0 + (256 << 14);
-	uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
-	while (size >= 512) {
-#if 0
-		pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
-			smp_processor_id(), entryhi);
-#endif
-		add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
-		entrylo0 += 512 << 14;
-		entrylo1 += 512 << 14;
-		entryhi += 512 << 20;
-		size -= 512;
-	}
-}
-#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
-
-/**
- * Called to release the named block which was used to made sure
- * that nobody used the memory for something else during
- * init. Now we'll free it so userspace apps can use this
- * memory region with bootmem_alloc.
- *
- * This function is called only once from prom_free_prom_memory().
- */
-void octeon_hal_setup_reserved32(void)
-{
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-	on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
-#endif
-}
-
 /**
  * Reboot Octeon
  *
@@ -294,18 +243,6 @@ static void octeon_halt(void)
 	octeon_kill_core(NULL);
 }
 
-#if 0
-/**
- * Platform time init specifics.
- * Returns
- */
-void __init plat_time_init(void)
-{
-	/* Nothing special here, but we are required to have one */
-}
-
-#endif
-
 /**
  * Handle all the error condition interrupts that might occur.
  *
@@ -466,7 +403,6 @@ void __init prom_init(void)
 	const int coreid = cvmx_get_core_num();
 	int i;
 	int argc;
-	struct uart_port octeon_port;
 #ifdef CONFIG_CAVIUM_RESERVE32
 	int64_t addr = -1;
 #endif
@@ -502,25 +438,13 @@ void __init prom_init(void)
 	 * memory when it is getting memory from the
 	 * bootloader. Later, after the memory allocations are
 	 * complete, the reserve32 will be freed.
-	 */
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-	if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
-		pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
-		       "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
-		       "is set\n");
-	else
-		addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
-							0, 0, 512 << 20,
-							"CAVIUM_RESERVE32", 0);
-#else
-	/*
+	 *
 	 * Allocate memory for RESERVED32 aligned on 2MB boundary. This
 	 * is in case we later use hugetlb entries with it.
 	 */
 	addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
 						0, 0, 2 << 20,
 						"CAVIUM_RESERVE32", 0);
-#endif
 	if (addr < 0)
 		pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
 	else
@@ -685,30 +609,6 @@ void __init prom_init(void)
 	_machine_restart = octeon_restart;
 	_machine_halt = octeon_halt;
 
-	memset(&octeon_port, 0, sizeof(octeon_port));
-	/*
-	 * For early_serial_setup we don't set the port type or
-	 * UPF_FIXED_TYPE.
-	 */
-	octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
-	octeon_port.iotype = UPIO_MEM;
-	/* I/O addresses are every 8 bytes */
-	octeon_port.regshift = 3;
-	/* Clock rate of the chip */
-	octeon_port.uartclk = mips_hpt_frequency;
-	octeon_port.fifosize = 64;
-	octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
-	octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
-	octeon_port.serial_in = octeon_serial_in;
-	octeon_port.serial_out = octeon_serial_out;
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-	octeon_port.line = 0;
-#else
-	octeon_port.line = octeon_uart;
-#endif
-	octeon_port.irq = 42 + octeon_uart;
-	early_serial_setup(&octeon_port);
-
 	octeon_user_io_init();
 	register_smp_ops(&octeon_smp_ops);
 }
@@ -802,7 +702,7 @@ int prom_putchar(char c)
 	} while ((lsrval & 0x20) == 0);
 
 	/* Write the byte */
-	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
+	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
 	return 1;
 }
 
@@ -817,9 +717,4 @@ void prom_free_prom_memory(void)
 		panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
 	}
 #endif
-
-	/* This call is here so that it is performed after any TLB
-	   initializations. It needs to be after these in case the
-	   CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
-	octeon_hal_setup_reserved32();
 }
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index c198efd..6d99b9d 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -279,14 +279,6 @@ static void octeon_cpu_die(unsigned int cpu)
 	uint32_t avail_coremask;
 	struct cvmx_bootmem_named_block_desc *block_desc;
 
-#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG
-	/* Disable the watchdog */
-	cvmx_ciu_wdogx_t ciu_wdog;
-	ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu));
-	ciu_wdog.s.mode = 0;
-	cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64);
-#endif
-
 	while (per_cpu(cpu_state, cpu) != CPU_DEAD)
 		cpu_relax();
 
@@ -327,7 +319,7 @@ static void octeon_cpu_die(unsigned int cpu)
 				   avail_coremask);
 	}
 
-	pr_info("Reset core %d. Available Coremask = %x \n", coreid,
+	pr_info("Reset core %d. Available Coremask = %x\n", coreid,
 		avail_coremask);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 0);
diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c
index cfce7af..85ec9cc 100644
--- a/arch/mips/cobalt/pci.c
+++ b/arch/mips/cobalt/pci.c
@@ -25,7 +25,7 @@ static struct resource cobalt_mem_resource = {
 
 static struct resource cobalt_io_resource = {
 	.start	= 0x1000,
-	.end	= GT_DEF_PCI0_IO_SIZE - 1,
+	.end	= 0xffffffUL,
 	.name	= "PCI I/O",
 	.flags	= IORESOURCE_IO,
 };
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 5a5b6ba..e700095 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 24 14:08:59 2009
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 11:35:01 2010
 #
 CONFIG_MIPS=y
 
@@ -11,11 +11,12 @@ CONFIG_MIPS=y
 # CONFIG_MACH_ALCHEMY is not set
 CONFIG_AR7=y
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@ CONFIG_AR7=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -46,6 +48,7 @@ CONFIG_AR7=y
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -63,10 +66,8 @@ CONFIG_CEVT_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -81,7 +82,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -103,6 +105,8 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
@@ -124,6 +128,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -141,8 +146,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -165,6 +169,7 @@ CONFIG_KEXEC=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -174,6 +179,14 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -186,14 +199,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -204,6 +215,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -225,19 +237,22 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -248,7 +263,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -256,14 +271,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -293,7 +335,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -377,6 +418,7 @@ CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_LED is not set
@@ -458,6 +500,7 @@ CONFIG_IP_NF_RAW=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 # CONFIG_ATM_CLIP is not set
@@ -466,6 +509,7 @@ CONFIG_ATM_BR2684=m
 CONFIG_ATM_BR2684_IPFILTER=y
 CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -541,20 +585,19 @@ CONFIG_HAMRADIO=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -576,6 +619,7 @@ CONFIG_MAC80211_RC_DEFAULT="pid"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -585,9 +629,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -636,6 +680,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -668,6 +713,10 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -687,6 +736,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -727,6 +777,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -737,23 +788,21 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_CPMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +862,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -824,11 +874,39 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -842,13 +920,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_DRIVER_EXTIF=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -882,15 +954,18 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
@@ -921,6 +996,7 @@ CONFIG_VLYNQ=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -984,6 +1060,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -996,11 +1073,11 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1039,21 +1116,29 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 # CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
@@ -1061,13 +1146,16 @@ CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD2=m
@@ -1108,11 +1196,13 @@ CONFIG_CRYPTO_ECB=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 267bd46..bbd826b 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Mon Feb 18 11:55:24 2008
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 12:14:30 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,25 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 CONFIG_BCM47XX=y
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -36,10 +41,14 @@ CONFIG_BCM47XX=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -50,16 +59,16 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_CFE=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -71,7 +80,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -84,6 +94,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -91,11 +102,13 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -105,11 +118,13 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -122,12 +137,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -144,12 +160,12 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -163,6 +179,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -170,25 +187,37 @@ CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -197,54 +226,90 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+# CONFIG_CFQ_GROUP_IOSCHED is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -253,7 +318,8 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -262,31 +328,30 @@ CONFIG_MMU=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -315,7 +380,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
@@ -339,36 +404,6 @@ CONFIG_DEFAULT_BIC=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="bic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -384,9 +419,12 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -404,6 +442,7 @@ CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -417,20 +456,25 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -439,20 +483,23 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -460,20 +507,53 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -481,10 +561,13 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -493,9 +576,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -507,24 +590,20 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -533,6 +612,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -545,31 +625,30 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 CONFIG_TIPC=m
 CONFIG_TIPC_ADVANCED=y
 CONFIG_TIPC_ZONES=3
 CONFIG_TIPC_CLUSTERS=1
 CONFIG_TIPC_NODES=255
-CONFIG_TIPC_SLAVE_NODES=0
 CONFIG_TIPC_PORTS=8191
 CONFIG_TIPC_LOG=0
 # CONFIG_TIPC_DEBUG is not set
@@ -580,8 +659,12 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -591,6 +674,8 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -601,7 +686,7 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -609,6 +694,7 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -626,6 +712,7 @@ CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -642,8 +729,10 @@ CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -651,58 +740,7 @@ CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_TOSHIBA_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_MCS_FIR=m
+# CONFIG_IRDA is not set
 CONFIG_BT=m
 # CONFIG_BT_L2CAP is not set
 # CONFIG_BT_SCO is not set
@@ -710,8 +748,7 @@ CONFIG_BT=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -720,51 +757,37 @@ CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
 CONFIG_RFKILL_LEDS=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_FD=m
-# CONFIG_NET_9P_DEBUG is not set
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -774,17 +797,22 @@ CONFIG_NET_9P_FD=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -829,9 +857,7 @@ CONFIG_MTD_ABSENT=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -854,6 +880,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -866,6 +897,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -875,18 +907,27 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -904,10 +945,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -924,21 +961,30 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -954,7 +1000,12 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -962,11 +1013,18 @@ CONFIG_ISCSI_TCP=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
@@ -990,8 +1048,11 @@ CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_MDIO_BITBANG=m
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -999,24 +1060,31 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -1026,41 +1094,67 @@ CONFIG_B44_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
-# CONFIG_P54_COMMON is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
 CONFIG_ATH5K=m
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
 # CONFIG_HOSTAP is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 CONFIG_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -1072,7 +1166,10 @@ CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
@@ -1086,6 +1183,10 @@ CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
 # CONFIG_WAN is not set
 CONFIG_ATM_DRIVERS=y
 CONFIG_ATM_DUMMY=m
@@ -1099,8 +1200,9 @@ CONFIG_ATM_TCP=m
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -1120,11 +1222,10 @@ CONFIG_SLHC=m
 # CONFIG_SLIP_SMART is not set
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_NET_FC is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -1134,6 +1235,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1166,6 +1268,7 @@ CONFIG_INPUT_EVDEV=m
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -1185,23 +1288,24 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# SPI support
+# PPS support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PPS is not set
 CONFIG_W1=m
 CONFIG_W1_CON=y
 
@@ -1217,21 +1321,45 @@ CONFIG_W1_MASTER_DS2490=m
 #
 CONFIG_W1_SLAVE_THERM=m
 CONFIG_W1_SLAVE_SMEM=m
+# CONFIG_W1_SLAVE_DS2431 is not set
 CONFIG_W1_SLAVE_DS2433=m
 # CONFIG_W1_SLAVE_DS2433_CRC is not set
 CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Sonics Silicon Backplane
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_BCM47XX_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
 # CONFIG_SSB_SILENT is not set
 # CONFIG_SSB_DEBUG is not set
 CONFIG_SSB_SERIAL=y
@@ -1239,24 +1367,26 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_SSB_PCICORE_HOSTMODE=y
 CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
 CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1271,15 +1401,9 @@ CONFIG_DISPLAY_SUPPORT=m
 #
 # Display hardware drivers
 #
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1292,24 +1416,24 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -1318,6 +1442,7 @@ CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1325,6 +1450,8 @@ CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1337,6 +1464,8 @@ CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1353,6 +1482,7 @@ CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1368,45 +1498,22 @@ CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
 
 #
@@ -1414,6 +1521,41 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1429,14 +1571,24 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_SSB is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1446,26 +1598,30 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_U132_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1473,6 +1629,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 CONFIG_USB_STORAGE_ALAUDA=y
 CONFIG_USB_STORAGE_ONETOUCH=y
 CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1480,7 +1637,6 @@ CONFIG_USB_STORAGE_KARMA=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1489,13 +1645,12 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1515,18 +1670,26 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_MOS7720=m
 CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 CONFIG_USB_SERIAL_DEBUG=m
 
 #
@@ -1535,18 +1698,13 @@ CONFIG_USB_SERIAL_DEBUG=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGET=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETMOTORCONTROL=m
-CONFIG_USB_PHIDGETSERVO=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1555,6 +1713,7 @@ CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
@@ -1563,30 +1722,51 @@ CONFIG_USB_XUSBATM=m
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1596,21 +1776,33 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Userspace I/O
+# TI VLYNQ
 #
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1621,10 +1813,11 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1642,28 +1835,39 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1690,15 +1894,13 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1721,12 +1923,19 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1736,13 +1945,12 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_V4_1 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1750,10 +1958,10 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1771,9 +1979,7 @@ CONFIG_NCPFS_OS2_NS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
-CONFIG_9P_FS=m
 
 #
 # Partition Types
@@ -1846,90 +2052,167 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 # CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 7fee027..6389ca0 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Sun May 31 20:17:18 2009
+# Linux kernel version: 2.6.34-rc2
+# Tue Mar 23 10:36:32 2010
 #
 CONFIG_MIPS=y
 
@@ -9,13 +9,14 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 CONFIG_BCM63XX=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@ CONFIG_BCM63XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -45,13 +47,17 @@ CONFIG_BCM63XX=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 
 #
 # CPU support
 #
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
 CONFIG_BCM63XX_CPU_6358=y
 CONFIG_BOARD_BCM963XX=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
@@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -189,15 +194,12 @@ CONFIG_LOCALVERSION=""
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y
 # CONFIG_EVENTFD is not set
 # CONFIG_SHMEM is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -246,14 +255,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 CONFIG_NET=y
@@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -529,6 +589,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -541,17 +602,48 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_BCM63XX_ENET=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_PIO=y
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
@@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
 # CONFIG_SSB_DEBUG is not set
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-# CONFIG_SSB_DRIVER_PCICORE is not set
+CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_SSB_DRIVER_MIPS is not set
 
 #
@@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 #
 # Display device support
 #
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -741,13 +832,14 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_SSB is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
@@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_CMDLINE_OVERRIDE is not set
@@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index c2f06e3..0583bb2 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 17:02:55 2008
+# Linux kernel version: 2.6.34-rc3
+# Sat Apr  3 16:32:11 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,25 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -36,10 +41,13 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 CONFIG_SIBYTE_BIGSUR=y
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_SIBYTE_BCM1x80=y
 CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_1 is not set
@@ -48,14 +56,13 @@ CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_4 is not set
 # CONFIG_CPU_SB1_PASS_2_112x is not set
 # CONFIG_CPU_SB1_PASS_3 is not set
-# CONFIG_SIMULATION is not set
 # CONFIG_SB1_CEX_ALWAYS_FATAL is not set
 # CONFIG_SB1_CERR_STALL is not set
-CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -66,15 +73,13 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_CEVT_BCM1480=y
 CONFIG_CSRC_BCM1480=y
 CONFIG_CFE=y
 CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -88,7 +93,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -101,6 +107,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -108,6 +115,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 CONFIG_CPU_SB1=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_SB1=y
 CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
@@ -123,11 +131,13 @@ CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -142,18 +152,17 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
-# CONFIG_MIPS_CMP is not set
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -175,6 +184,7 @@ CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -188,6 +198,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -195,23 +206,39 @@ CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
@@ -222,29 +249,36 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 # CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -252,26 +286,52 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -280,8 +340,9 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 CONFIG_ZONE_DMA32=y
 # CONFIG_PCCARD is not set
@@ -291,6 +352,8 @@ CONFIG_ZONE_DMA32=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
@@ -304,23 +367,20 @@ CONFIG_BINFMT_ELF32=y
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -353,36 +413,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -399,11 +429,13 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 # CONFIG_IPV6_MROUTE is not set
+CONFIG_NETLABEL=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -421,19 +453,53 @@ CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=m
@@ -459,22 +525,44 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
+CONFIG_SCTP_HMAC_SHA1=y
+# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -482,26 +570,47 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -513,9 +622,12 @@ CONFIG_FIB_RULES=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -530,33 +642,53 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=m
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+CONFIG_EEPROM_MAX6875=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -581,14 +713,13 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -600,14 +731,12 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_BLK_DEV_IDE_SWARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -625,10 +754,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -645,27 +770,36 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -676,9 +810,15 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
@@ -700,6 +840,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -715,6 +856,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -725,14 +867,16 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 CONFIG_PATA_SIL680=y
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -745,13 +889,16 @@ CONFIG_PATA_SIL680=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -774,6 +921,9 @@ CONFIG_PHYLIB=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -783,23 +933,33 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -811,29 +971,42 @@ CONFIG_SB1250_MAC=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -856,6 +1029,7 @@ CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -873,6 +1047,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_LIBPS2 is not set
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -893,8 +1068,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 # CONFIG_NOZOMI is not set
 
@@ -911,7 +1084,9 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -923,89 +1098,99 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-CONFIG_I2C_SIBYTE=y
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
-# Miscellaneous I2C Chip support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-CONFIG_SENSORS_PCF8591=y
-CONFIG_EEPROM_MAX6875=y
-# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_STUB is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1016,10 +1201,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1030,9 +1211,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1040,41 +1230,66 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
 CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=m
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1103,15 +1318,13 @@ CONFIG_NTFS_RW=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1120,9 +1333,12 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1133,16 +1349,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1205,12 +1422,18 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1219,23 +1442,53 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
@@ -1246,20 +1499,50 @@ CONFIG_DEBUG_MUTEXES=y
 #
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1276,7 +1559,7 @@ CONFIG_CRYPTO_SEQIV=m
 #
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
@@ -1287,14 +1570,20 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1325,25 +1614,36 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 68e90cd..f66d406 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,78 +1,102 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:24 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:46:14 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1000=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -106,184 +134,244 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1000"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 # CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
 
 #
 # PC-card bridges
 #
 # CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -294,110 +382,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -407,27 +410,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -436,25 +436,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -467,6 +467,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -492,14 +493,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -516,174 +516,115 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
+# UBI - Unsorted block images
 #
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
 
 #
-# Block devices
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -691,16 +632,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -710,35 +649,33 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -750,198 +687,291 @@ CONFIG_SERIAL_8250_AU1X00=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# Real Time Clock
+# OTG and related infrastructure
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -960,74 +990,65 @@ CONFIG_GENERIC_ACL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -1045,10 +1066,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1058,38 +1079,75 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1097,67 +1155,29 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 9081283..abb9a58 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,78 +1,102 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:24 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:50:15 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -106,173 +134,242 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1100"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
+# PC-card bridges
 #
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -283,110 +380,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -396,27 +408,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -425,25 +434,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -456,6 +465,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -481,14 +491,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -505,161 +514,123 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
+# UBI - Unsorted block images
 #
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
 
 #
-# Misc devices
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
 
 #
-# ATA/ATAPI/MFM/RLL support
+# IDE chipset support/bugfixes
 #
-# CONFIG_IDE is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -667,16 +638,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -686,34 +655,33 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -725,78 +693,91 @@ CONFIG_SERIAL_8250_AU1X00=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# PCMCIA character devices
 #
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_AU1100=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -804,9 +785,10 @@ CONFIG_FB_AU1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
@@ -816,132 +798,186 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# Real Time Clock
+# OTG and related infrastructure
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -960,69 +996,76 @@ CONFIG_GENERIC_ACL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1062,34 +1105,71 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1097,67 +1177,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index dabf030..991c20a 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1,78 +1,102 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:25 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:18:09 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-CONFIG_MIPS_DB1200=y
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_COHERENT=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1200=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -106,180 +134,235 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1200"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
 
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -290,107 +373,25 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -400,21 +401,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -423,25 +427,25 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -454,6 +458,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -479,19 +484,21 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -503,224 +510,134 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_AU1550 is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 
 #
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
 # CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_MIPS_AU1X00_ENET is not set
-# CONFIG_SMC91X is not set
+CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -728,16 +645,14 @@ CONFIG_MII=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -747,28 +662,26 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
 
 #
 # Serial drivers
@@ -776,33 +689,22 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
@@ -811,223 +713,624 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
 
 #
-# TPM devices
+# I2C Algorithms
 #
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C support
+# I2C Hardware Bus support
 #
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# Dallas's 1-wire bus
+# External I2C/SMBus adapter drivers
 #
-# CONFIG_W1 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# Hardware Monitoring support
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
-# Multimedia devices
+# Miscellaneous I2C Chip support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Digital Video Broadcasting Devices
+# SPI Master Controller Drivers
 #
-# CONFIG_DVB is not set
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_ADM1025=y
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM70=y
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_AU1200=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
-# Logo configuration
+# Miscellaneous USB options
 #
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# Sound
+# USB Host Controller Drivers
 #
-# CONFIG_SOUND is not set
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# HID Devices
+# USB Device Class drivers
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# USB support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Gadget Support
+# USB Imaging devices
 #
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_MDC800 is not set
 
 #
-# MMC/SD Card support
+# USB port drivers
 #
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AU1X=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# LED devices
+# MMC/SD/SDIO Card Drivers
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# LED drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AU1X=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# LED Triggers
+# LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
-# InfiniBand support
+# LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# Real Time Clock
+# RTC interfaces
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Engine support
+# I2C RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
-CONFIG_JFS_FS=y
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
+CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
+CONFIG_UDF_FS=y
 CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -1036,21 +1339,17 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1059,27 +1358,36 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
 # CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
 CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1087,93 +1395,140 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="mem=48M"
+CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1181,67 +1536,32 @@ CONFIG_CMDLINE="mem=48M"
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index a151313..5424c91 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,80 +1,104 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:26 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:46:33 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -87,6 +111,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -94,11 +119,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -108,137 +136,207 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1500"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
@@ -246,51 +344,49 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -301,110 +397,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -414,27 +425,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,25 +451,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -474,6 +482,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -499,14 +508,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -524,152 +533,152 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 # CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# You can enable one or both FireWire driver stacks.
 #
-# CONFIG_I2O is not set
 
 #
-# Network device support
+# The newer stack is recommended.
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -677,88 +686,51 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -766,16 +738,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -785,33 +755,34 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -825,301 +796,143 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-CONFIG_SND_AU1X00=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-CONFIG_USB_YEALINK=m
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 
 #
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1128,7 +941,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1136,112 +949,107 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_LD=m
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
+# RTC interfaces
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Engine support
+# SPI RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
 
 #
-# DMA Clients
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Devices
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1260,74 +1068,81 @@ CONFIG_GENERIC_ACL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -1345,10 +1160,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
 # CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1358,38 +1173,76 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1397,67 +1250,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 6b64339..949b6dc 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,79 +1,103 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:27 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:58:22 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -107,137 +135,205 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1550"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
@@ -245,51 +341,49 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -300,110 +394,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -413,27 +422,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -442,25 +448,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -473,6 +479,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -498,20 +505,23 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -523,105 +533,96 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_AU1550=m
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_AU1550=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
+# CONFIG_BLK_DEV_LOOP is not set
 
 #
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
+CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -631,82 +632,65 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# You can enable one or both FireWire driver stacks.
 #
-# CONFIG_I2O is not set
 
 #
-# Network device support
+# The newer stack is recommended.
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -714,96 +698,53 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -811,16 +752,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -830,26 +769,27 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -866,199 +806,420 @@ CONFIG_SERIAL_8250_AU1X00=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
 
 #
-# TPM devices
+# I2C Algorithms
 #
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C support
+# I2C Hardware Bus support
 #
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# PC SMBus host controller drivers
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
 
 #
-# Dallas's 1-wire bus
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_W1 is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
 
 #
-# Hardware Monitoring support
+# External I2C/SMBus adapter drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# Multimedia devices
+# Other I2C/SMBus bus drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Miscellaneous I2C Chip support
 #
-# CONFIG_DVB is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Graphics support
+# SPI Master Controller Drivers
 #
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
-# Sound
+# SPI Protocol Masters
 #
-# CONFIG_SOUND is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 
 #
-# HID Devices
+# PPS support
 #
-# CONFIG_HID is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# USB support
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
 #
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AU1XPSC=y
+# CONFIG_SND_SOC_DB1200 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# Real Time Clock
+# RTC interfaces
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Engine support
+# I2C RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1077,75 +1238,82 @@ CONFIG_GENERIC_ACL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
@@ -1162,10 +1330,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
 # CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1175,38 +1343,75 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1214,67 +1419,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index ed84b4c..84b6503 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 13:04:24 2007
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb  3 18:12:31 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,28 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -33,32 +41,39 @@ CONFIG_SGI_IP27=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_SGI_SN_M_MODE=y
 # CONFIG_SGI_SN_N_MODE is not set
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
 CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_DEFAULT_SGI_PARTITION=y
 CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC64=y
 CONFIG_BOOT_ELF64=y
@@ -66,7 +81,8 @@ CONFIG_BOOT_ELF64=y
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -79,6 +95,7 @@ CONFIG_BOOT_ELF64=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -86,6 +103,7 @@ CONFIG_CPU_R10000=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_R10000=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -99,6 +117,7 @@ CONFIG_64BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
@@ -110,6 +129,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_NUMA=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_NODES_SHIFT=6
@@ -120,16 +140,22 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_64=y
 CONFIG_NR_CPUS=64
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,13 +168,13 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
 # CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -162,20 +188,41 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -184,44 +231,92 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -230,11 +325,10 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -242,8 +336,9 @@ CONFIG_MMU=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -255,13 +350,10 @@ CONFIG_BINFMT_ELF32=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
@@ -273,6 +365,8 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -292,19 +386,40 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,9 +429,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,12 +443,9 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -340,7 +454,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+CONFIG_NET_SCH_MULTIQ=y
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -348,6 +462,7 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -364,41 +479,63 @@ CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -408,9 +545,13 @@ CONFIG_RFKILL=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -423,14 +564,19 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_OSD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -453,10 +599,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -471,11 +613,18 @@ CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+CONFIG_SCSI_HPSA=m
 # CONFIG_SCSI_3W_9XXX is not set
+CONFIG_SCSI_3W_SAS=m
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -483,11 +632,21 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC79XX is not set
 CONFIG_SCSI_AIC94XX=m
 # CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+CONFIG_SCSI_DPT_I2O=m
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
 # CONFIG_SCSI_HPTIOP is not set
+CONFIG_LIBFC=m
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -502,16 +661,31 @@ CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_PMCRAID=m
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -519,36 +693,39 @@ CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
 # CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -562,23 +739,51 @@ CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
 # CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
 CONFIG_SGI_IOC3_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=m
 # CONFIG_DM9000 is not set
+CONFIG_ETHOC=m
+CONFIG_SMSC911X=m
+CONFIG_DNET=m
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_ATL2=m
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+CONFIG_E1000E=m
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_IGBVF=m
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -588,24 +793,75 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SKY2 is not set
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=m
+CONFIG_CNIC=m
 CONFIG_QLA3XXX=m
 # CONFIG_ATL1 is not set
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_JME=m
 CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 CONFIG_CHELSIO_T3=m
+CONFIG_ENIC=m
+CONFIG_IXGBE=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-# CONFIG_MLX4_CORE is not set
+CONFIG_NIU=m
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+# CONFIG_MLX4_DEBUG is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_QLGE=m
+CONFIG_SFC=m
+CONFIG_BE2NET=m
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_RTL8180=m
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
 CONFIG_IPW2100=m
 CONFIG_IPW2100_MONITOR=y
 CONFIG_IPW2100_DEBUG=y
@@ -615,38 +871,57 @@ CONFIG_IPW2200_RADIOTAP=y
 CONFIG_IPW2200_PROMISCUOUS=y
 CONFIG_IPW2200_QOS=y
 CONFIG_IPW2200_DEBUG=y
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLAGN=m
+CONFIG_IWL4965=y
+CONFIG_IWL5000=y
+CONFIG_IWL3945=m
+CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_HERMES=m
+# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
 CONFIG_NORTEL_HERMES=m
 CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI_PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -664,13 +939,16 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_NOZOMI=m
 
 #
 # Serial drivers
@@ -693,95 +971,258 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_RTC is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
 
 #
-# SPI support
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=m
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=m
+CONFIG_MFD_WM8350_I2C=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_AB3100_CORE=m
+CONFIG_AB3100_OTP=m
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_WM8350=m
+CONFIG_LEDS_BD2802=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 
 #
-# DMA Engine support
+# iptables trigger is under Netfilter config (LED target)
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Clients
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Devices
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
 #
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=y
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_WM8350 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
+CONFIG_RTC_DRV_AB3100=m
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+CONFIG_UIO_SMX=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -792,36 +1233,58 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -840,16 +1303,13 @@ CONFIG_GENERIC_ACL=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -859,28 +1319,32 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 # CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -910,35 +1374,37 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 CONFIG_DLM=m
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -947,65 +1413,140 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index b71a0a4..4caa0e0 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Mon Nov  9 23:42:42 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan  4 13:41:09 2010
 #
 CONFIG_MIPS=y
 
@@ -27,6 +27,7 @@ CONFIG_MACH_LOONGSON=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -51,6 +52,9 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y
 # CONFIG_LEMOTE_FULOONG2E is not set
 CONFIG_LEMOTE_MACH2F=y
 CONFIG_CS5536=y
+CONFIG_CS5536_MFGPT=y
+CONFIG_LOONGSON_SUSPEND=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -63,13 +67,8 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
@@ -109,13 +108,15 @@ CONFIG_CPU_LOONGSON2F=y
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_CPU_LOONGSON2=y
 CONFIG_SYS_HAS_CPU_LOONGSON2F=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
+CONFIG_CPU_SUPPORTS_ADDRWINCFG=y
+CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED=y
 
 #
 # Kernel type
@@ -137,7 +138,6 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -146,17 +146,11 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
@@ -175,7 +169,7 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -194,9 +188,9 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -211,6 +205,7 @@ CONFIG_AUDIT=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=64
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -224,7 +219,11 @@ CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -256,14 +255,18 @@ CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
 
 #
 # GCOV-based kernel profiling
 #
-# CONFIG_SLOW_WORK is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -283,14 +286,41 @@ CONFIG_BLOCK_COMPAT=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_DEADLINE=m
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_FREEZER=y
 
 #
@@ -314,7 +344,7 @@ CONFIG_MMU=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -335,9 +365,34 @@ CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_MIPS_EXTERNAL_TIMER=y
+CONFIG_MIPS_CPUFREQ=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPUFreq processor drivers
+#
+CONFIG_LOONGSON2_CPUFREQ=m
 CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
@@ -346,11 +401,12 @@ CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -361,12 +417,13 @@ CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 # CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
+CONFIG_ARPD=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -399,30 +456,34 @@ CONFIG_DEFAULT_BIC=y
 # CONFIG_DEFAULT_WESTWOOD is not set
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
 # CONFIG_IPV6_OPTIMISTIC_DAD is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 # CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
 
 #
 # Core Netfilter Configuration
@@ -446,17 +507,22 @@ CONFIG_NETFILTER_ADVANCED=y
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
 # CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
@@ -518,26 +584,61 @@ CONFIG_NET_SCH_FIFO=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
+CONFIG_LIB80211=m
+CONFIG_LIB80211_DEBUG=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
-# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
 # CONFIG_NET_9P is not set
 
 #
@@ -555,7 +656,7 @@ CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
@@ -566,7 +667,12 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -577,19 +683,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -619,8 +713,7 @@ CONFIG_BLK_DEV_IDEDMA_SFF=y
 #
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AEC62XX is not set
@@ -700,7 +793,29 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
 # CONFIG_FUSION is not set
 
 #
@@ -712,19 +827,19 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -738,6 +853,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
@@ -769,7 +885,7 @@ CONFIG_NET_PCI=y
 # CONFIG_8139CP is not set
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
 # CONFIG_R6040 is not set
@@ -795,6 +911,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
+CONFIG_R8169_VLAN=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -810,15 +927,31 @@ CONFIG_R8169=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-CONFIG_WLAN_PRE80211=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -831,17 +964,39 @@ CONFIG_WLAN_80211=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
 # CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -849,8 +1004,9 @@ CONFIG_WLAN_80211=y
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -884,7 +1040,7 @@ CONFIG_MOUSE_PS2_SYNAPTICS=y
 # CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
@@ -904,6 +1060,7 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -934,8 +1091,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250=m
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -953,8 +1109,7 @@ CONFIG_SERIAL_8250_FOURPORT=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=m
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1033,14 +1188,18 @@ CONFIG_VIDEO_MEDIA=m
 #
 # Multimedia drivers
 #
+CONFIG_IR_CORE=m
+CONFIG_VIDEO_IR=m
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_VIVI=m
 # CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
@@ -1049,52 +1208,55 @@ CONFIG_V4L_USB_DRIVERS=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
 CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
 # CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
 # CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
 # CONFIG_VIDEO_HDPVR is not set
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_ET61X251=m
 # CONFIG_USB_OV511 is not set
 # CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
+CONFIG_USB_SN9C102=m
 # CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_ZC0301=m
 # CONFIG_USB_PWC is not set
 CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
@@ -1132,6 +1294,7 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
@@ -1161,7 +1324,7 @@ CONFIG_FB_SIS_315=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_GENERIC=m
 
 #
 # Display device support
@@ -1193,28 +1356,44 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 # CONFIG_SND_RTCTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
+CONFIG_SND_RAWMIDI_SEQ=m
 # CONFIG_SND_OPL3_LIB_SEQ is not set
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=10
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
@@ -1281,7 +1460,10 @@ CONFIG_SND_CS5535AUDIO=m
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_MIPS is not set
-# CONFIG_SND_USB is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
@@ -1299,32 +1481,41 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1344,7 +1535,7 @@ CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG_WHITELIST=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB=m
 # CONFIG_USB_WUSB_CBAF is not set
 
 #
@@ -1366,14 +1557,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
 # CONFIG_USB_TMC is not set
 
@@ -1397,7 +1589,7 @@ CONFIG_USB_STORAGE_ALAUDA=m
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
@@ -1467,7 +1659,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
+CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_IDMOUSE is not set
@@ -1480,16 +1672,95 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=m
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
 #
 # CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+# CONFIG_UWB_WLP is not set
+# CONFIG_UWB_I1480U is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
@@ -1504,22 +1775,18 @@ CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
 # CONFIG_ET131X is not set
 # CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
+# CONFIG_W35UND is not set
 # CONFIG_ECHO is not set
+# CONFIG_OTUS is not set
 # CONFIG_COMEDI is not set
 # CONFIG_ASUS_OLED is not set
 # CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_RTL8187SE is not set
-# CONFIG_RTL8192SU is not set
+# CONFIG_R8187SE is not set
 # CONFIG_RTL8192E is not set
 # CONFIG_INPUT_MIMIO is not set
 # CONFIG_TRANZPORT is not set
 
 #
-# Android
-#
-
-#
 # Qualcomm MSM Camera And Video
 #
 
@@ -1527,7 +1794,6 @@ CONFIG_STAGING=y
 # Camera Sensor Selection
 #
 # CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
 # CONFIG_POHMELFS is not set
 # CONFIG_B3DFG is not set
 # CONFIG_PLAN9AUTH is not set
@@ -1544,28 +1810,55 @@ CONFIG_STAGING=y
 #
 # CONFIG_RAR_REGISTER is not set
 # CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
 CONFIG_FB_SM7XX=y
-CONFIG_FB_SM7XX_ACCEL=y
+# CONFIG_FB_SM7XX_ACCEL is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
 CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
 # CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
@@ -1575,17 +1868,25 @@ CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
+CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
 
 #
 # Caches
 #
-# CONFIG_FSCACHE is not set
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1599,11 +1900,13 @@ CONFIG_ZISOFS=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
 
 #
 # Pseudo filesystems
@@ -1616,23 +1919,60 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_FSCACHE is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1643,45 +1983,45 @@ CONFIG_SUNRPC=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
 
 #
@@ -1695,125 +2035,155 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
 #
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER=m
 CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
 
 #
 # Authenticated Encryption with Associated Data
 #
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
 
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
 # CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
 
 #
 # Hash modes
 #
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
 
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
 
 #
 # Random Number Generation
 #
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1821,14 +2191,20 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 144b94d..cff8f4c 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Sun Sep 30 12:56:10 2007
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 13:39:10 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,28 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_MACH_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -33,10 +41,14 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_MIPS_MTX1=y
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_DB1000 is not set
@@ -53,29 +65,38 @@ CONFIG_MIPS_MTX1=y
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1500=y
 CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -88,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -95,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -109,28 +134,36 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +181,7 @@ CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -157,23 +191,49 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -182,61 +242,104 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -251,6 +354,7 @@ CONFIG_YENTA_TOSHIBA=y
 CONFIG_PD6729=m
 CONFIG_I82092=m
 # CONFIG_PCMCIA_AU1X00 is not set
+# CONFIG_PCMCIA_ALCHEMY_DEVBOARD is not set
 CONFIG_PCCARD_NONSTATIC=m
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -258,35 +362,38 @@ CONFIG_PCCARD_NONSTATIC=m
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
 # CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -315,42 +422,13 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -366,12 +444,15 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETLABEL is not set
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
@@ -380,57 +461,97 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -439,34 +560,29 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 # CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
 # DECnet: Netfilter Configuration
 #
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -475,6 +591,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -487,25 +604,25 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 CONFIG_TIPC=m
 # CONFIG_TIPC_ADVANCED is not set
 # CONFIG_TIPC_DEBUG is not set
@@ -516,8 +633,12 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 # CONFIG_DECNET_ROUTER is not set
 CONFIG_LLC=y
@@ -535,12 +656,9 @@ CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -550,7 +668,7 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -558,6 +676,7 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -574,6 +693,7 @@ CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -586,10 +706,13 @@ CONFIG_NET_ACT_POLICE=y
 # CONFIG_NET_ACT_GACT is not set
 # CONFIG_NET_ACT_MIRRED is not set
 # CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_ACT_SKBEDIT is not set
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -613,9 +736,8 @@ CONFIG_6PACK=m
 CONFIG_BPQETHER=m
 CONFIG_BAYCOM_SER_FDX=m
 CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_BAYCOM_EPP=m
 CONFIG_YAM=m
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -657,15 +779,8 @@ CONFIG_MCP2120_DONGLE=m
 CONFIG_OLD_BELKIN_DONGLE=m
 CONFIG_ACT200L_DONGLE=m
 # CONFIG_KINGSUN_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
@@ -683,17 +798,17 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -702,24 +817,19 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
 # CONFIG_AF_RXRPC_DEBUG is not set
 # CONFIG_RXKAD is not set
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -730,40 +840,43 @@ CONFIG_IEEE80211_SOFTMAC=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
-CONFIG_MTD=m
+CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -775,206 +888,81 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
 
 #
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ALCHEMY is not set
-# CONFIG_MTD_MTX1 is not set
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
-CONFIG_MTD_PMC551=m
-# CONFIG_MTD_PMC551_BUGFIX is not set
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
 #
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_NANDSIM=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
 
 #
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
-CONFIG_PARIDE=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CY82C693=m
-# CONFIG_BLK_DEV_CS5520 is not set
-CONFIG_BLK_DEV_CS5530=m
-CONFIG_BLK_DEV_HPT34X=m
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=m
-# CONFIG_BLK_DEV_JMICRON is not set
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8213 is not set
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_PDC202XX_BURST=y
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-# CONFIG_BLK_DEV_SLC90E66 is not set
-CONFIG_BLK_DEV_TRM290=m
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_TIFM_CORE=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+CONFIG_SCSI_MOD=m
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
@@ -985,18 +973,13 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
+# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 # CONFIG_SCSI_SCAN_ASYNC is not set
 CONFIG_SCSI_WAIT_SCAN=m
@@ -1009,198 +992,39 @@ CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_ATA is not set
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-CONFIG_AIC79XX_DEBUG_ENABLE=y
-CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ARCMSR=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
-CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_AHCI=m
-CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
-CONFIG_SATA_MV=m
-CONFIG_SATA_NV=m
-CONFIG_PDC_ADMA=m
-CONFIG_SATA_QSTOR=m
-CONFIG_SATA_PROMISE=m
-CONFIG_SATA_SX4=m
-CONFIG_SATA_SIL=m
-CONFIG_SATA_SIL24=m
-CONFIG_SATA_SIS=m
-CONFIG_SATA_ULI=m
-CONFIG_SATA_VIA=m
-CONFIG_SATA_VITESSE=m
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-CONFIG_PATA_CS5520=m
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-CONFIG_PATA_EFAR=m
-CONFIG_ATA_GENERIC=m
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-CONFIG_PATA_JMICRON=m
-CONFIG_PATA_TRIFLEX=m
-# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPIIX=m
-# CONFIG_PATA_OLDPIIX is not set
-CONFIG_PATA_NETCELL=m
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-CONFIG_PATA_RZ1000=m
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-CONFIG_PATA_PDC2027X=m
-CONFIG_PATA_SIL680=m
-CONFIG_PATA_SIS=m
-CONFIG_PATA_VIA=m
-CONFIG_PATA_WINBOND=m
-# CONFIG_PATA_PLATFORM is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# You can enable one or both FireWire driver stacks.
 #
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
 
 #
-# Protocols
+# The newer stack is recommended.
 #
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_CONFIG=m
-CONFIG_I2O_CONFIG_OLD_IOCTL=y
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+# CONFIG_VETH is not set
 CONFIG_ARCNET=m
 CONFIG_ARCNET_1201=m
 CONFIG_ARCNET_1051=m
@@ -1225,9 +1049,11 @@ CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_AX88796 is not set
@@ -1240,8 +1066,12 @@ CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
 CONFIG_TULIP=m
 # CONFIG_TULIP_MWI is not set
 # CONFIG_TULIP_MMIO is not set
@@ -1251,21 +1081,26 @@ CONFIG_WINBOND_840=m
 CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 CONFIG_AMD8111_ETH=m
-# CONFIG_AMD8111E_NAPI is not set
 CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
+# CONFIG_KSZ884X_PCI is not set
 CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
 CONFIG_FORCEDETH=m
 # CONFIG_FORCEDETH_NAPI is not set
 # CONFIG_TC35815 is not set
-CONFIG_DGRS=m
-CONFIG_EEPRO100=m
 CONFIG_E100=m
 CONFIG_FEALNX=m
 CONFIG_NATSEMI=m
@@ -1276,52 +1111,71 @@ CONFIG_8139TOO=m
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 CONFIG_8139TOO_8129=y
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 CONFIG_SIS900=m
 CONFIG_EPIC100=m
+# CONFIG_SMSC9420 is not set
 CONFIG_SUNDANCE=m
 # CONFIG_SUNDANCE_MMIO is not set
 CONFIG_TLAN=m
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_VIA_RHINE=m
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
-CONFIG_NET_POCKET=y
-CONFIG_DE600=m
-CONFIG_DE620=m
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
-# CONFIG_R8169_NAPI is not set
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
 CONFIG_SKY2=m
-CONFIG_SK98LIN=m
+# CONFIG_SKY2_DEBUG is not set
 CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
+# CONFIG_CNIC is not set
 CONFIG_QLA3XXX=m
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
 CONFIG_CHELSIO_T1=m
 # CONFIG_CHELSIO_T1_1G is not set
-CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
+# CONFIG_VXGE is not set
 CONFIG_MYRI10GE=m
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 CONFIG_IBMOL=m
 CONFIG_IBMLS=m
@@ -1329,12 +1183,18 @@ CONFIG_3C359=m
 CONFIG_TMS380TR=m
 CONFIG_TMSPCI=m
 CONFIG_ABYSS=m
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
 
 #
 # USB Network Adapters
@@ -1343,11 +1203,13 @@ CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
@@ -1361,6 +1223,9 @@ CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 # CONFIG_USB_KC2190 is not set
 CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -1383,16 +1248,6 @@ CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
 CONFIG_PCI200SYN=m
 CONFIG_WANXL=m
-CONFIG_PC300=m
-CONFIG_PC300_MLPPP=y
-
-#
-# Cyclades-PC300 MLPPP support is disabled.
-#
-
-#
-# Refer to the file README.mlppp, provided by PC300 package.
-#
 # CONFIG_PC300TOO is not set
 CONFIG_FARSYNC=m
 CONFIG_DSCC4=m
@@ -1428,15 +1283,13 @@ CONFIG_ATM_HORIZON=m
 # CONFIG_ATM_HORIZON_DEBUG is not set
 CONFIG_ATM_IA=m
 # CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-CONFIG_ATM_FORE200E_PCA=y
-CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
+CONFIG_ATM_FORE200E=m
 # CONFIG_ATM_FORE200E_USE_TASKLET is not set
 CONFIG_ATM_FORE200E_TX_RETRY=16
 CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_FORE200E=m
 CONFIG_ATM_HE=m
 CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_SOLOS is not set
 CONFIG_FDDI=y
 CONFIG_DEFXX=m
 # CONFIG_DEFXX_MMIO is not set
@@ -1444,7 +1297,6 @@ CONFIG_SKFP=m
 CONFIG_HIPPI=y
 CONFIG_ROADRUNNER=m
 # CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -1462,219 +1314,53 @@ CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_NET_FC=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
-
-#
-# ISDN feature submodules
-#
-# CONFIG_ISDN_DRV_LOOP is not set
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-# CONFIG_HYSDN is not set
-CONFIG_ISDN_DRV_GIGASET=m
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_UNDOCREQ is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -1682,10 +1368,10 @@ CONFIG_INPUT_UINPUT=m
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_PARKBD=m
 CONFIG_SERIO_PCIPS2=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
@@ -1696,30 +1382,13 @@ CONFIG_GAMEPORT_FM801=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-# CONFIG_MOXA_INTELLIO is not set
-CONFIG_MOXA_SMARTIO=m
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-CONFIG_SPECIALIX=m
-# CONFIG_SPECIALIX_RTSCTS is not set
-CONFIG_SX=m
-# CONFIG_RIO is not set
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1741,161 +1410,128 @@ CONFIG_SERIAL_8250_RSA=y
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_JSM=m
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_WDT_MTX1 is not set
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
+# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_TCG_TPM=m
-CONFIG_TCG_ATMEL=m
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_I810=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_PROSAVAGE=m
-CONFIG_I2C_SAVAGE4=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-CONFIG_I2C_STUB=m
 # CONFIG_I2C_TINY_USB is not set
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-CONFIG_I2C_VOODOO3=m
 
 #
-# Miscellaneous I2C Chip support
+# Other I2C/SMBus bus drivers
 #
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_EEPROM_MAX6875=m
-# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
 
 #
-# SPI support
+# PPS support
 #
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# SPI Master Controller Drivers
+# Memory mapped GPIO expanders:
 #
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
-# SPI Protocol Masters
+# I2C GPIO expanders:
 #
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_W1=m
-CONFIG_W1_CON=y
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
-# 1-wire Bus Masters
+# PCI GPIO expanders:
 #
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
-# 1-wire Slaves
+# SPI GPIO expanders:
 #
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2433=m
-# CONFIG_W1_SLAVE_DS2433_CRC is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
-CONFIG_SENSORS_ABITUGURU=m
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1903,17 +1539,23 @@ CONFIG_SENSORS_ADM1026=m
 # CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ASB100=m
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 CONFIG_SENSORS_ATXP1=m
 CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
 CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_FSCHER=m
-CONFIG_SENSORS_FSCPOS=m
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
 CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
 CONFIG_SENSORS_LM78=m
@@ -1924,16 +1566,25 @@ CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 CONFIG_SENSORS_PC87360=m
 # CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_SHT15 is not set
 CONFIG_SENSORS_SIS5595=m
 # CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47M192=m
 CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 CONFIG_SENSORS_VIA686A=m
 CONFIG_SENSORS_VT1211=m
 CONFIG_SENSORS_VT8231=m
@@ -1942,370 +1593,94 @@ CONFIG_SENSORS_W83791D=m
 CONFIG_SENSORS_W83792D=m
 # CONFIG_SENSORS_W83793 is not set
 CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
 CONFIG_SENSORS_W83627HF=m
 CONFIG_SENSORS_W83627EHF=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA7111=m
-CONFIG_VIDEO_SAA7114=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_VPX3220=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_SAA6588=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-# CONFIG_TUNER_TEA5761 is not set
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_OSS=m
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_VP3054=m
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_29XXX=y
-CONFIG_VIDEO_PVRUSB2_24XXX=y
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_EM28XX=m
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-# CONFIG_USB_OV511 is not set
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_USB_DSBR=m
-CONFIG_DVB_CORE=m
-CONFIG_DVB_CORE_ATTACH=y
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-# CONFIG_DVB_USB_M920X is not set
-# CONFIG_DVB_USB_GL861 is not set
-# CONFIG_DVB_USB_AU6610 is not set
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-# CONFIG_DVB_USB_TTUSB2 is not set
-CONFIG_DVB_USB_DTT200U=m
-# CONFIG_DVB_USB_OPERA1 is not set
-# CONFIG_DVB_USB_AF9005 is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_TDA10086=m
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# DVB-T (terrestrial) frontends
+# Watchdog Device Drivers
 #
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_WDT_MTX1=y
 
 #
-# DVB-C (cable) frontends
+# PCI-based Watchdog Cards
 #
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+# USB-based Watchdog Cards
 #
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Tuners/PLL support
+# Sonics Silicon Backplane
 #
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TDA827X=m
-# CONFIG_DVB_TUNER_QT1010 is not set
-CONFIG_DVB_TUNER_MT2060=m
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
 
 #
-# Miscellaneous devices
+# Multifunction device drivers
 #
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_TUA6100=m
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR_I2C=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-CONFIG_FB_PM2_FIFO_DISCONNECT=y
-CONFIG_FB_CYBER2000=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_MATROX_MULTIHEAD=y
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-# CONFIG_FB_S3 is not set
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_VOODOO1=m
-# CONFIG_FB_VT8623 is not set
-CONFIG_FB_TRIDENT=m
-# CONFIG_FB_TRIDENT_ACCEL is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -2318,32 +1693,29 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_VX_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 CONFIG_SND_AD1889=m
 CONFIG_SND_ALS300=m
 CONFIG_SND_ALI5451=m
@@ -2352,14 +1724,18 @@ CONFIG_SND_ATIIXP_MODEM=m
 CONFIG_SND_AU8810=m
 CONFIG_SND_AU8820=m
 CONFIG_SND_AU8830=m
+# CONFIG_SND_AW2 is not set
 CONFIG_SND_AZT3328=m
 CONFIG_SND_BT87X=m
 # CONFIG_SND_BT87X_OVERCLOCK is not set
 CONFIG_SND_CA0106=m
 CONFIG_SND_CMIPCI=m
+# CONFIG_SND_OXYGEN is not set
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
 CONFIG_SND_DARLA20=m
 CONFIG_SND_GINA20=m
 CONFIG_SND_LAYLA20=m
@@ -2372,6 +1748,8 @@ CONFIG_SND_ECHO3G=m
 CONFIG_SND_INDIGO=m
 CONFIG_SND_INDIGOIO=m
 CONFIG_SND_INDIGODJ=m
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 CONFIG_SND_EMU10K1=m
 CONFIG_SND_EMU10K1X=m
 CONFIG_SND_ENS1370=m
@@ -2379,19 +1757,36 @@ CONFIG_SND_ENS1371=m
 CONFIG_SND_ES1938=m
 CONFIG_SND_ES1968=m
 CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
 CONFIG_SND_HDA_INTEL=m
+# CONFIG_SND_HDA_HWDEP is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+# CONFIG_SND_HDA_INPUT_JACK is not set
+# CONFIG_SND_HDA_PATCH_LOADER is not set
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
 CONFIG_SND_HDSP=m
 CONFIG_SND_HDSPM=m
+# CONFIG_SND_HIFIER is not set
 CONFIG_SND_ICE1712=m
 CONFIG_SND_ICE1724=m
 CONFIG_SND_INTEL8X0=m
 CONFIG_SND_INTEL8X0M=m
 CONFIG_SND_KORG1212=m
-CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
+# CONFIG_SND_LX6464ES is not set
 CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
 CONFIG_SND_MIXART=m
 CONFIG_SND_NM256=m
 CONFIG_SND_PCXHR=m
@@ -2403,55 +1798,30 @@ CONFIG_SND_SONICVIBES=m
 CONFIG_SND_TRIDENT=m
 CONFIG_SND_VIA82XX=m
 CONFIG_SND_VIA82XX_MODEM=m
+# CONFIG_SND_VIRTUOSO is not set
 CONFIG_SND_VX222=m
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
+CONFIG_SND_MIPS=y
 # CONFIG_SND_AU1X00 is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 CONFIG_SND_VXPOCKET=m
 CONFIG_SND_PDAUDIOCF=m
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_TRIDENT=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
 
 #
@@ -2459,12 +1829,50 @@ CONFIG_USB_HIDDEV=y
 #
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -2472,19 +1880,27 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_SSB is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -2493,32 +1909,38 @@ CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=m
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -2526,25 +1948,20 @@ CONFIG_USB_LIBUSUAL=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -2556,6 +1973,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -2575,20 +1993,27 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_MOS7720=m
 CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -2596,18 +2021,13 @@ CONFIG_USB_EZUSB=y
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGET=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETMOTORCONTROL=m
-CONFIG_USB_PHIDGETSERVO=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
 CONFIG_USB_APPLEDISPLAY=m
@@ -2617,86 +2037,113 @@ CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_XUSBATM=m
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_TIFM_SD=m
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-CONFIG_INFINIBAND_AMSO1100=m
-CONFIG_INFINIBAND_AMSO1100_DEBUG=y
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_RTC_LIB=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
 #
@@ -2712,6 +2159,7 @@ CONFIG_RTC_DRV_TEST=m
 # I2C RTC drivers
 #
 CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
 CONFIG_RTC_DRV_DS1672=m
 # CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=m
@@ -2720,48 +2168,45 @@ CONFIG_RTC_DRV_X1205=m
 CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
-CONFIG_RTC_DRV_RS5C348=m
-CONFIG_RTC_DRV_MAX6902=m
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 CONFIG_RTC_DRV_DS1553=m
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=m
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=m
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 CONFIG_RTC_DRV_V3020=m
 
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_IOATDMA=m
+# CONFIG_RTC_DRV_AU1XXX is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Userspace I/O
+# TI VLYNQ
 #
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -2772,44 +2217,43 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -2838,73 +2282,79 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_ECRYPT_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
@@ -2916,7 +2366,6 @@ CONFIG_NCPFS_OS2_NS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
 # CONFIG_AFS_DEBUG is not set
 
@@ -2948,10 +2397,6 @@ CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
 CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
@@ -2992,118 +2437,179 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
 #
 CONFIG_KEYS=y
 # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index ddf67f6..97382b6 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,79 +1,103 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 09:53:29 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -107,184 +135,244 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1100"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 # CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
 
 #
 # PC-card bridges
 #
 # CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -295,110 +383,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -408,27 +411,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -437,25 +437,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -468,6 +468,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -493,14 +494,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -517,166 +517,136 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
 
 #
-# Misc devices
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
 
 #
-# ATA/ATAPI/MFM/RLL support
+# IDE chipset support/bugfixes
 #
-# CONFIG_IDE is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -684,16 +654,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -703,28 +671,26 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
 
 #
 # Serial drivers
@@ -743,198 +709,288 @@ CONFIG_SERIAL_8250_AU1X00=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# Real Time Clock
+# OTG and related infrastructure
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -953,69 +1009,76 @@ CONFIG_GENERIC_ACL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1055,34 +1118,71 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1090,67 +1190,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig
new file mode 100644
index 0000000..e9ad773
--- /dev/null
+++ b/arch/mips/configs/pb1200_defconfig
@@ -0,0 +1,1568 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:23:34 2010
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_MACH_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1200=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-pb1200"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_ADM1025=y
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM70=y
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AU1X=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 5ec6083..7497d33 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,78 +1,102 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:05:27 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -106,190 +134,255 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1500"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
 CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
 #
 # CONFIG_YENTA is not set
-CONFIG_PD6729=m
+# CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
 # CONFIG_PCMCIA_AU1X00 is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -300,110 +393,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -413,27 +421,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -442,25 +447,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -473,6 +478,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -498,14 +504,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -523,30 +529,20 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -554,67 +550,66 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
 
 #
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -624,82 +619,65 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# You can enable one or both FireWire driver stacks.
 #
-# CONFIG_I2O is not set
 
 #
-# Network device support
+# The newer stack is recommended.
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -707,96 +685,51 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -804,16 +737,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -823,33 +754,34 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -863,282 +795,450 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_S1D13XXX=y
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Console display driver support
 #
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# Real Time Clock
+# OTG and related infrastructure
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
@@ -1155,10 +1255,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
 # CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1168,38 +1268,75 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1207,67 +1344,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 6647642..aa526f5 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,79 +1,103 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:06:07 2010
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -107,190 +135,255 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1550"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
 CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_CARDBUS is not set
 
 #
 # PC-card bridges
 #
 # CONFIG_YENTA is not set
-CONFIG_PD6729=m
+# CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
 # CONFIG_PCMCIA_AU1X00 is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -301,110 +394,25 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -414,27 +422,30 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,25 +454,25 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -474,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -499,14 +511,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -524,30 +536,30 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_AU1550=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
 #
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Block devices
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -555,67 +567,66 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
 
 #
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
 #
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -625,82 +636,65 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# You can enable one or both FireWire driver stacks.
 #
-# CONFIG_I2O is not set
 
 #
-# Network device support
+# The newer stack is recommended.
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -708,88 +702,51 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -797,16 +754,14 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -816,33 +771,34 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -856,282 +812,492 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
 
 #
-# TPM devices
+# I2C Algorithms
 #
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C support
+# I2C Hardware Bus support
 #
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# PC SMBus host controller drivers
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
 
 #
-# Dallas's 1-wire bus
+# I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_W1 is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
-# Hardware Monitoring support
+# Other I2C/SMBus bus drivers
 #
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
+# Display device support
 #
-# CONFIG_HID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Console display driver support
 #
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
-# MMC/SD Card support
+# USB Device Class drivers
 #
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_NEW_LEDS is not set
 
 #
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
 #
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED Triggers
+# USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 
 #
-# InfiniBand support
+# USB port drivers
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# Real Time Clock
+# RTC interfaces
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Engine support
+# I2C RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
-# DMA Clients
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Auxiliary Display support
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Virtualization
+# TI VLYNQ
 #
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
 # CONFIG_NLS_CODEPAGE_860 is not set
@@ -1148,10 +1314,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
 # CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1161,38 +1327,75 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_9 is not set
 # CONFIG_NLS_ISO8859_13 is not set
 # CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
 
 #
 # Security options
@@ -1200,67 +1403,32 @@ CONFIG_CROSSCOMPILE=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index 57a5048..90a032a 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:24:17 2008
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 11:49:51 2010
 #
 CONFIG_MIPS=y
 
@@ -9,22 +9,25 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -38,11 +41,14 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
 CONFIG_MIKROTIK_RB532=y
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -53,14 +59,15 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_NEED_DMA_MAP_STATE=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -73,7 +80,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=4
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -86,6 +94,7 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -93,11 +102,13 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -107,11 +118,13 @@ CONFIG_32BIT=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -124,12 +137,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -151,6 +165,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -168,23 +183,31 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
@@ -192,54 +215,87 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_PCI_QUIRKS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -248,7 +304,8 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -257,25 +314,22 @@ CONFIG_MMU=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -325,7 +379,6 @@ CONFIG_DEFAULT_VEGAS=y
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="vegas"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -336,8 +389,9 @@ CONFIG_NETFILTER_ADVANCED=y
 #
 # Core Netfilter Configuration
 #
+CONFIG_NETFILTER_NETLINK=m
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=y
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -355,18 +409,23 @@ CONFIG_NF_CONNTRACK_IRC=m
 # CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=y
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -375,18 +434,21 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 CONFIG_NETFILTER_XT_MATCH_LIMIT=y
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=y
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
@@ -394,20 +456,21 @@ CONFIG_NETFILTER_XT_MATCH_STATE=y
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 # CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 # CONFIG_IP_NF_TARGET_LOG is not set
@@ -415,8 +478,8 @@ CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_NF_NAT=y
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=y
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
 # CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
@@ -426,17 +489,22 @@ CONFIG_NF_NAT_TFTP=m
 # CONFIG_NF_NAT_H323 is not set
 # CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_RAW=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
 CONFIG_LLC2=m
@@ -446,6 +514,8 @@ CONFIG_LLC2=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -455,7 +525,7 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -463,6 +533,7 @@ CONFIG_NET_SCH_RR=m
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -496,8 +567,10 @@ CONFIG_NET_ACT_IPT=m
 # CONFIG_NET_ACT_NAT is not set
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -514,14 +587,19 @@ CONFIG_HAMRADIO=y
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -533,13 +611,17 @@ CONFIG_WIRELESS_EXT=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -612,6 +694,11 @@ CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -623,23 +710,36 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -656,10 +756,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -676,27 +772,35 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -708,9 +812,15 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_VERBOSE_ERROR is not set
 # CONFIG_SATA_PMP is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -732,6 +842,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -747,6 +858,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -757,29 +869,39 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 CONFIG_PATA_RB532=y
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_IFB=m
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -797,21 +919,28 @@ CONFIG_KORINA=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -821,30 +950,27 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-CONFIG_VIA_RHINE_NAPI=y
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
+CONFIG_WLAN=y
 CONFIG_ATMEL=m
 # CONFIG_PCI_ATMEL is not set
 # CONFIG_PRISM54 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -864,6 +990,7 @@ CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -872,7 +999,8 @@ CONFIG_SLHC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -887,17 +1015,29 @@ CONFIG_INPUT=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_RB532_BUTTON=y
 
 #
 # Hardware I/O ports
@@ -909,6 +1049,7 @@ CONFIG_INPUT_KEYBOARD=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -928,105 +1069,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Watchdog Device Drivers
+# PPS support
 #
-# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# PCI-based Watchdog Cards
+# Memory mapped GPIO expanders:
 #
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
-# Sonics Silicon Backplane
+# I2C GPIO expanders:
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
 
 #
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
+# PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
-# Audio decoders
+# SPI GPIO expanders:
 #
 
 #
-# Video decoders
+# AC97 GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Video and audio decoders
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_RC32434_WDT=y
 
 #
-# MPEG video encoders
+# PCI-based Watchdog Cards
 #
-# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Video encoders
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# Video improvement chips
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1037,13 +1168,10 @@ CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1053,9 +1181,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1064,41 +1201,67 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_MIKROTIK_RB532=y
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1117,15 +1280,13 @@ CONFIG_EXT2_FS=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1148,9 +1309,14 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1160,6 +1326,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1198,11 +1365,22 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -1210,18 +1388,32 @@ CONFIG_FRAME_WARN=1024
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
@@ -1249,14 +1441,20 @@ CONFIG_CRYPTO_TEST=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1266,7 +1464,7 @@ CONFIG_CRYPTO_TEST=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1286,27 +1484,36 @@ CONFIG_CRYPTO_TEST=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
index b0dc6d5..94d23b4 100644
--- a/arch/mips/dec/kn01-berr.c
+++ b/arch/mips/dec/kn01-berr.c
@@ -46,7 +46,7 @@
  * There is no default value -- it has to be initialized.
  */
 u16 cached_kn01_csr;
-DEFINE_SPINLOCK(kn01_lock);
+static DEFINE_RAW_SPINLOCK(kn01_lock);
 
 
 static inline void dec_kn01_be_ack(void)
@@ -54,12 +54,12 @@ static inline void dec_kn01_be_ack(void)
 	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
-	spin_lock_irqsave(&kn01_lock, flags);
+	raw_spin_lock_irqsave(&kn01_lock, flags);
 
 	*csr = cached_kn01_csr | KN01_CSR_MEMERR;	/* Clear bus IRQ. */
 	iob();
 
-	spin_unlock_irqrestore(&kn01_lock, flags);
+	raw_spin_unlock_irqrestore(&kn01_lock, flags);
 }
 
 static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
@@ -182,7 +182,7 @@ void __init dec_kn01_be_init(void)
 	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
-	spin_lock_irqsave(&kn01_lock, flags);
+	raw_spin_lock_irqsave(&kn01_lock, flags);
 
 	/* Preset write-only bits of the Control Register cache. */
 	cached_kn01_csr = *csr;
@@ -194,7 +194,7 @@ void __init dec_kn01_be_init(void)
 	*csr = cached_kn01_csr;
 	iob();
 
-	spin_unlock_irqrestore(&kn01_lock, flags);
+	raw_spin_unlock_irqrestore(&kn01_lock, flags);
 
 	/* Clear any leftover errors from the firmware. */
 	dec_kn01_be_ack();
diff --git a/arch/mips/dec/prom/locore.S b/arch/mips/dec/prom/locore.S
index d9acdce..f72b574 100644
--- a/arch/mips/dec/prom/locore.S
+++ b/arch/mips/dec/prom/locore.S
@@ -27,4 +27,3 @@ NESTED(genexcept_early, 0, sp)
 	jr	k0
 	 rfe
 END(genexcept_early)
-
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
index 1dd74fb..9252d9b 100644
--- a/arch/mips/include/asm/abi.h
+++ b/arch/mips/include/asm/abi.h
@@ -13,12 +13,14 @@
 #include <asm/siginfo.h>
 
 struct mips_abi {
-	int (* const setup_frame)(struct k_sigaction * ka,
+	int (* const setup_frame)(void *sig_return, struct k_sigaction *ka,
 	                          struct pt_regs *regs, int signr,
 	                          sigset_t *set);
-	int (* const setup_rt_frame)(struct k_sigaction * ka,
+	const unsigned long	signal_return_offset;
+	int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka,
 	                       struct pt_regs *regs, int signr,
 	                       sigset_t *set, siginfo_t *info);
+	const unsigned long	rt_signal_return_offset;
 	const unsigned long	restart;
 };
 
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index dd75d67..c63c56b 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -29,7 +29,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 
 /*
  * atomic_set - set atomic variable
@@ -137,7 +137,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -189,7 +189,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -249,7 +249,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -410,7 +410,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
  * @v: pointer of type atomic64_t
  *
  */
-#define atomic64_read(v)	((v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 /*
  * atomic64_set - set atomic variable
@@ -434,7 +434,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -516,7 +516,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -524,10 +524,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -568,7 +568,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -576,10 +576,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -628,7 +628,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -788,9 +788,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
  * atomic*_return operations are serializing but not the non-*_return
  * versions.
  */
-#define smp_mb__before_atomic_dec()	smp_llsc_mb()
+#define smp_mb__before_atomic_dec()	smp_mb__before_llsc()
 #define smp_mb__after_atomic_dec()	smp_llsc_mb()
-#define smp_mb__before_atomic_inc()	smp_llsc_mb()
+#define smp_mb__before_atomic_inc()	smp_mb__before_llsc()
 #define smp_mb__after_atomic_inc()	smp_llsc_mb()
 
 #include <asm-generic/atomic-long.h>
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index 8e9ac31..c0884f0 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -88,12 +88,20 @@
 		: /* no output */		\
 		: "m" (*(int *)CKSEG1)		\
 		: "memory")
-
-#define fast_wmb()	__sync()
-#define fast_rmb()	__sync()
-#define fast_mb()	__sync()
-#ifdef CONFIG_SGI_IP28
-#define fast_iob()				\
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+# define OCTEON_SYNCW_STR	".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
+# define __syncw() 	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
+
+# define fast_wmb()	__syncw()
+# define fast_rmb()	barrier()
+# define fast_mb()	__sync()
+# define fast_iob()	do { } while (0)
+#else /* ! CONFIG_CPU_CAVIUM_OCTEON */
+# define fast_wmb()	__sync()
+# define fast_rmb()	__sync()
+# define fast_mb()	__sync()
+# ifdef CONFIG_SGI_IP28
+#  define fast_iob()				\
 	__asm__ __volatile__(			\
 		".set	push\n\t"		\
 		".set	noreorder\n\t"		\
@@ -104,13 +112,14 @@
 		: /* no output */		\
 		: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
 		: "memory")
-#else
-#define fast_iob()				\
+# else
+#  define fast_iob()				\
 	do {					\
 		__sync();			\
 		__fast_iob();			\
 	} while (0)
-#endif
+# endif
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
 
 #ifdef CONFIG_CPU_HAS_WB
 
@@ -131,25 +140,42 @@
 #endif /* !CONFIG_CPU_HAS_WB */
 
 #if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
-#define __WEAK_ORDERING_MB	"       sync	\n"
+# ifdef CONFIG_CPU_CAVIUM_OCTEON
+#  define smp_mb()	__sync()
+#  define smp_rmb()	barrier()
+#  define smp_wmb()	__syncw()
+# else
+#  define smp_mb()	__asm__ __volatile__("sync" : : :"memory")
+#  define smp_rmb()	__asm__ __volatile__("sync" : : :"memory")
+#  define smp_wmb()	__asm__ __volatile__("sync" : : :"memory")
+# endif
 #else
-#define __WEAK_ORDERING_MB	"		\n"
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
 #endif
+
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
 #define __WEAK_LLSC_MB		"       sync	\n"
 #else
 #define __WEAK_LLSC_MB		"		\n"
 #endif
 
-#define smp_mb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_rmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_wmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-
 #define set_mb(var, value) \
 	do { var = value; smp_mb(); } while (0)
 
 #define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_rmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_wmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define smp_mb__before_llsc() smp_wmb()
+/* Cause previous writes to become visible on all CPUs as soon as possible */
+#define nudge_writes() __asm__ __volatile__(".set push\n\t"		\
+					    ".set arch=octeon\n\t"	\
+					    "syncw\n\t"			\
+					    ".set pop" : : : "memory")
+#else
+#define smp_mb__before_llsc() smp_llsc_mb()
+#define nudge_writes() mb()
+#endif
 
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 84a3838..9255cfb 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -42,7 +42,7 @@
 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
-#define smp_mb__before_clear_bit()	smp_llsc_mb()
+#define smp_mb__before_clear_bit()	smp_mb__before_llsc()
 #define smp_mb__after_clear_bit()	smp_llsc_mb()
 
 /*
@@ -258,7 +258,7 @@ static inline int test_and_set_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -395,7 +395,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -485,7 +485,7 @@ static inline int test_and_change_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index 815a438..2d28017 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -16,7 +16,7 @@
 ({									\
 	__typeof(*(m)) __ret;						\
 									\
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {				\
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {			\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -72,14 +72,14 @@
  */
 extern void __cmpxchg_called_with_bad_pointer(void);
 
-#define __cmpxchg(ptr, old, new, barrier)				\
+#define __cmpxchg(ptr, old, new, pre_barrier, post_barrier)		\
 ({									\
 	__typeof__(ptr) __ptr = (ptr);					\
 	__typeof__(*(ptr)) __old = (old);				\
 	__typeof__(*(ptr)) __new = (new);				\
 	__typeof__(*(ptr)) __res = 0;					\
 									\
-	barrier;							\
+	pre_barrier;							\
 									\
 	switch (sizeof(*(__ptr))) {					\
 	case 4:								\
@@ -96,13 +96,13 @@ extern void __cmpxchg_called_with_bad_pointer(void);
 		break;							\
 	}								\
 									\
-	barrier;							\
+	post_barrier;							\
 									\
 	__res;								\
 })
 
-#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_llsc_mb())
-#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, )
+#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_mb__before_llsc(), smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, , )
 
 #define cmpxchg64(ptr, o, n)						\
   ({									\
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index f58aed3..613f691 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"mips\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 1f4df64..ac73ced 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -95,6 +95,9 @@
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
 #endif
+#ifndef kernel_uses_smartmips_rixi
+#define kernel_uses_smartmips_rixi 0
+#endif
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
 #endif
@@ -191,6 +194,9 @@
 # ifndef cpu_has_64bit_addresses
 # define cpu_has_64bit_addresses	0
 # endif
+# ifndef cpu_vmbits
+# define cpu_vmbits 31
+# endif
 #endif
 
 #ifdef CONFIG_64BIT
@@ -209,6 +215,10 @@
 # ifndef cpu_has_64bit_addresses
 # define cpu_has_64bit_addresses	1
 # endif
+# ifndef cpu_vmbits
+# define cpu_vmbits cpu_data[0].vmbits
+# define __NEED_VMBITS_PROBE
+# endif
 #endif
 
 #if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 1260443..b39def3 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -58,6 +58,9 @@ struct cpuinfo_mips {
 	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
 	int			srsets;	/* Shadow register sets */
 	int			core;	/* physical core number */
+#ifdef CONFIG_64BIT
+	int			vmbits;	/* Virtual memory size in bits */
+#endif
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
 	/*
 	 * In the MIPS MT "SMTC" model, each TC is considered
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index cf373a9..a5acda4 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -224,7 +224,7 @@ enum cpu_type_enum {
 	 * MIPS64 class processors
 	 */
 	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
-	CPU_CAVIUM_OCTEON,
+	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
 
 	CPU_LAST
 };
diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h
index 559db66..4c51401 100644
--- a/arch/mips/include/asm/current.h
+++ b/arch/mips/include/asm/current.h
@@ -1,23 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2002 Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct * get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current		get_current()
-
-#endif /* _ASM_CURRENT_H */
+#include <asm-generic/current.h>
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
index 28fa717..88d9ffd 100644
--- a/arch/mips/include/asm/dec/kn01.h
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -80,7 +80,6 @@
 struct pt_regs;
 
 extern u16 cached_kn01_csr;
-extern spinlock_t kn01_lock;
 
 extern void dec_kn01_be_init(void);
 extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
index d8f9872..06746c5 100644
--- a/arch/mips/include/asm/device.h
+++ b/arch/mips/include/asm/device.h
@@ -4,4 +4,3 @@
  * This file is released under the GPLv2
  */
 #include <asm-generic/device.h>
-
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 7a6a35d..ea77a42 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -310,6 +310,7 @@ do {									\
 
 #endif /* CONFIG_64BIT */
 
+struct pt_regs;
 struct task_struct;
 
 extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
@@ -334,14 +335,14 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
 #define ELF_HWCAP       (0)
 
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
 
-#define ELF_PLATFORM  (NULL)
+#define ELF_PLATFORM  __elf_platform
+extern const char *__elf_platform;
 
 /*
  * See comments in asm-alpha/elf.h, this is the same thing
@@ -367,4 +368,8 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 #define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
 #endif
 
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int uses_interp);
 #endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index aecada6..3b40927 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -41,7 +41,11 @@ struct mips_fpu_emulator_stats {
 DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
 
 #define MIPS_FPU_EMU_INC_STATS(M)					\
-	cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M))
+do {									\
+	preempt_disable();						\
+	__local_inc(&__get_cpu_var(fpuemustats).M);			\
+	preempt_enable();						\
+} while (0)
 
 #else
 #define MIPS_FPU_EMU_INC_STATS(M) do { } while (0)
diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h
index 3986cd8..ce35c9a 100644
--- a/arch/mips/include/asm/ftrace.h
+++ b/arch/mips/include/asm/ftrace.h
@@ -4,7 +4,7 @@
  * more details.
  *
  * Copyright (C) 2009 DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
 #ifndef _ASM_MIPS_FTRACE_H
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
index 032ca73..48bb823 100644
--- a/arch/mips/include/asm/i8253.h
+++ b/arch/mips/include/asm/i8253.h
@@ -12,7 +12,7 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
-extern spinlock_t i8253_lock;
+extern raw_spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
 
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
index 8572a2d..c7e2784 100644
--- a/arch/mips/include/asm/i8259.h
+++ b/arch/mips/include/asm/i8259.h
@@ -35,7 +35,7 @@
 #define SLAVE_ICW4_DEFAULT	0x01
 #define PIC_ICW4_AEOI		2
 
-extern spinlock_t i8259A_lock;
+extern raw_spinlock_t i8259A_lock;
 
 extern int i8259A_irq_pending(unsigned int irq);
 extern void make_8259A_irq(unsigned int irq);
@@ -51,7 +51,7 @@ static inline int i8259_irq(void)
 {
 	int irq;
 
-	spin_lock(&i8259A_lock);
+	raw_spin_lock(&i8259A_lock);
 
 	/* Perform an interrupt acknowledge cycle on controller 1. */
 	outb(0x0C, PIC_MASTER_CMD);		/* prepare for poll */
@@ -78,7 +78,7 @@ static inline int i8259_irq(void)
 			irq = -1;
 	}
 
-	spin_unlock(&i8259A_lock);
+	raw_spin_unlock(&i8259A_lock);
 
 	return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
 }
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 436878e..c98bf51 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -447,6 +447,24 @@ __BUILDIO(q, u64)
 #define readl_relaxed			readl
 #define readq_relaxed			readq
 
+#define readb_be(addr)							\
+	__raw_readb((__force unsigned *)(addr))
+#define readw_be(addr)							\
+	be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
+#define readl_be(addr)							\
+	be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
+#define readq_be(addr)							\
+	be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
+
+#define writeb_be(val, addr)						\
+	__raw_writeb((val), (__force unsigned *)(addr))
+#define writew_be(val, addr)						\
+	__raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
+#define writel_be(val, addr)						\
+	__raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
+#define writeq_be(val, addr)						\
+	__raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
+
 /*
  * Some code tests for these symbols
  */
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
index 48223b0..19002d6 100644
--- a/arch/mips/include/asm/kgdb.h
+++ b/arch/mips/include/asm/kgdb.h
@@ -38,6 +38,8 @@ extern int kgdb_early_setup;
 extern void *saved_vectors[32];
 extern void handle_exception(struct pt_regs *regs);
 extern void breakinst(void);
+extern int kgdb_ll_trap(int cmd, const char *str,
+			struct pt_regs *regs, long err, int trap, int sig);
 
 #endif				/* __KERNEL__ */
 
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index 361f4f16..bdcdef0 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -193,29 +193,4 @@ static __inline__ long local_sub_return(long i, local_t * l)
 #define __local_add(i, l)	((l)->a.counter+=(i))
 #define __local_sub(i, l)	((l)->a.counter-=(i))
 
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)	 	\
-	({ local_t res__;		\
-	   preempt_disable(); 		\
-	   res__ = (l);			\
-	   preempt_enable();		\
-	   res__; })
-#define cpu_local_wrap(l)		\
-	({ preempt_disable();		\
-	   l;				\
-	   preempt_enable(); })		\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l)	cpu_local_inc(l)
-#define __cpu_local_dec(l)	cpu_local_dec(l)
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
 #endif /* _ARCH_MIPS_LOCAL_H */
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 21cbbc7..483ffea 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -50,7 +50,7 @@
 #define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
 #define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
 
-#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_PERIPHERAL	0x0
 #define AR7_RESET_SOFTWARE	0x4
 #define AR7_RESET_STATUS	0x8
 
@@ -105,26 +105,9 @@ static inline u8 ar7_chip_rev(void)
 	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
 }
 
-static inline int ar7_cpu_freq(void)
-{
-	return ar7_cpu_clock;
-}
-
-static inline int ar7_bus_freq(void)
-{
-	return ar7_bus_clock;
-}
-
-static inline int ar7_vbus_freq(void)
-{
-	return ar7_bus_clock / 2;
-}
-#define ar7_cpmac_freq ar7_vbus_freq
-
-static inline int ar7_dsp_freq(void)
-{
-	return ar7_dsp_clock;
-}
+struct clk {
+	unsigned int	rate;
+};
 
 static inline int ar7_has_high_cpmac(void)
 {
@@ -145,7 +128,7 @@ static inline int ar7_has_high_cpmac(void)
 static inline void ar7_device_enable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) | (1 << bit), reset_reg);
 	msleep(20);
 }
@@ -153,7 +136,7 @@ static inline void ar7_device_enable(u32 bit)
 static inline void ar7_device_disable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
 	msleep(20);
 }
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
index cbe9c4f..abc317c 100644
--- a/arch/mips/include/asm/mach-ar7/gpio.h
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,88 +22,18 @@
 #include <asm/mach-ar7/ar7.h>
 
 #define AR7_GPIO_MAX 32
+#define NR_BUILTIN_GPIO AR7_GPIO_MAX
 
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
+#define gpio_to_irq(gpio)	-1
 
-/* Common GPIO layer */
-static inline int gpio_get_value(unsigned gpio)
-{
-	void __iomem *gpio_in =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
 
-	return readl(gpio_in) & (1 << gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	void __iomem *gpio_out =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
-	unsigned tmp;
-
-	tmp = readl(gpio_out) & ~(1 << gpio);
-	if (value)
-		tmp |= 1 << gpio;
-	writel(tmp, gpio_out);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	void __iomem *gpio_dir =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
-	if (gpio >= AR7_GPIO_MAX)
-		return -EINVAL;
-
-	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
-
-	return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	void __iomem *gpio_dir =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
-	if (gpio >= AR7_GPIO_MAX)
-		return -EINVAL;
-
-	gpio_set_value(gpio, value);
-	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
-
-	return 0;
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
+#define gpio_cansleep __gpio_cansleep
 
 /* Board specific GPIO functions */
-static inline int ar7_gpio_enable(unsigned gpio)
-{
-	void __iomem *gpio_en =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
-	writel(readl(gpio_en) | (1 << gpio), gpio_en);
-
-	return 0;
-}
-
-static inline int ar7_gpio_disable(unsigned gpio)
-{
-	void __iomem *gpio_en =
-		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
-	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
-
-	return 0;
-}
+int ar7_gpio_enable(unsigned gpio);
+int ar7_gpio_disable(unsigned gpio);
 
 #include <asm-generic/gpio.h>
 
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 854e95f..a697661 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -130,6 +130,56 @@ static inline int au1xxx_cpu_needs_config_od(void)
 	return 0;
 }
 
+#define ALCHEMY_CPU_UNKNOWN	-1
+#define ALCHEMY_CPU_AU1000	0
+#define ALCHEMY_CPU_AU1500	1
+#define ALCHEMY_CPU_AU1100	2
+#define ALCHEMY_CPU_AU1550	3
+#define ALCHEMY_CPU_AU1200	4
+
+static inline int alchemy_get_cputype(void)
+{
+	switch (read_c0_prid() & 0xffff0000) {
+	case 0x00030000:
+		return ALCHEMY_CPU_AU1000;
+		break;
+	case 0x01030000:
+		return ALCHEMY_CPU_AU1500;
+		break;
+	case 0x02030000:
+		return ALCHEMY_CPU_AU1100;
+		break;
+	case 0x03030000:
+		return ALCHEMY_CPU_AU1550;
+		break;
+	case 0x04030000:
+	case 0x05030000:
+		return ALCHEMY_CPU_AU1200;
+		break;
+	}
+
+	return ALCHEMY_CPU_UNKNOWN;
+}
+
+static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
+	int timeout, i;
+
+	/* check LSR TX_EMPTY bit */
+	timeout = 0xffffff;
+	do {
+		if (__raw_readl(base + 0x1c) & 0x20)
+			break;
+		/* slow down */
+		for (i = 10000; i; i--)
+			asm volatile ("nop");
+	} while (--timeout);
+
+	__raw_writel(c, base + 0x04);	/* tx */
+	wmb();
+}
+
 /* arch/mips/au1000/common/clocks.c */
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -138,25 +188,336 @@ extern unsigned long get_au1x00_uart_baud_base(void);
 extern unsigned long au1xxx_calc_clock(void);
 
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
-void au1xxx_save_and_sleep(void);
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
 void au_sleep(void);
-void save_au1xxx_intctl(void);
-void restore_au1xxx_intctl(void);
 
-/*
- * Every board describes its IRQ mapping with this table.
- */
-struct au1xxx_irqmap {
-	int	im_irq;
-	int	im_type;
-	int	im_request;
+
+/* SOC Interrupt numbers */
+
+#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
+
+enum soc_au1000_ints {
+	AU1000_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1000_UART0_INT	= AU1000_FIRST_INT,
+	AU1000_UART1_INT,
+	AU1000_UART2_INT,
+	AU1000_UART3_INT,
+	AU1000_SSI0_INT,
+	AU1000_SSI1_INT,
+	AU1000_DMA_INT_BASE,
+
+	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
+	AU1000_TOY_MATCH0_INT,
+	AU1000_TOY_MATCH1_INT,
+	AU1000_TOY_MATCH2_INT,
+	AU1000_RTC_INT,
+	AU1000_RTC_MATCH0_INT,
+	AU1000_RTC_MATCH1_INT,
+	AU1000_RTC_MATCH2_INT,
+	AU1000_IRDA_TX_INT,
+	AU1000_IRDA_RX_INT,
+	AU1000_USB_DEV_REQ_INT,
+	AU1000_USB_DEV_SUS_INT,
+	AU1000_USB_HOST_INT,
+	AU1000_ACSYNC_INT,
+	AU1000_MAC0_DMA_INT,
+	AU1000_MAC1_DMA_INT,
+	AU1000_I2S_UO_INT,
+	AU1000_AC97C_INT,
+	AU1000_GPIO0_INT,
+	AU1000_GPIO1_INT,
+	AU1000_GPIO2_INT,
+	AU1000_GPIO3_INT,
+	AU1000_GPIO4_INT,
+	AU1000_GPIO5_INT,
+	AU1000_GPIO6_INT,
+	AU1000_GPIO7_INT,
+	AU1000_GPIO8_INT,
+	AU1000_GPIO9_INT,
+	AU1000_GPIO10_INT,
+	AU1000_GPIO11_INT,
+	AU1000_GPIO12_INT,
+	AU1000_GPIO13_INT,
+	AU1000_GPIO14_INT,
+	AU1000_GPIO15_INT,
+	AU1000_GPIO16_INT,
+	AU1000_GPIO17_INT,
+	AU1000_GPIO18_INT,
+	AU1000_GPIO19_INT,
+	AU1000_GPIO20_INT,
+	AU1000_GPIO21_INT,
+	AU1000_GPIO22_INT,
+	AU1000_GPIO23_INT,
+	AU1000_GPIO24_INT,
+	AU1000_GPIO25_INT,
+	AU1000_GPIO26_INT,
+	AU1000_GPIO27_INT,
+	AU1000_GPIO28_INT,
+	AU1000_GPIO29_INT,
+	AU1000_GPIO30_INT,
+	AU1000_GPIO31_INT,
+};
+
+enum soc_au1100_ints {
+	AU1100_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
+	AU1100_UART1_INT,
+	AU1100_SD_INT,
+	AU1100_UART3_INT,
+	AU1100_SSI0_INT,
+	AU1100_SSI1_INT,
+	AU1100_DMA_INT_BASE,
+
+	AU1100_TOY_INT		= AU1100_FIRST_INT + 14,
+	AU1100_TOY_MATCH0_INT,
+	AU1100_TOY_MATCH1_INT,
+	AU1100_TOY_MATCH2_INT,
+	AU1100_RTC_INT,
+	AU1100_RTC_MATCH0_INT,
+	AU1100_RTC_MATCH1_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1100_IRDA_TX_INT,
+	AU1100_IRDA_RX_INT,
+	AU1100_USB_DEV_REQ_INT,
+	AU1100_USB_DEV_SUS_INT,
+	AU1100_USB_HOST_INT,
+	AU1100_ACSYNC_INT,
+	AU1100_MAC0_DMA_INT,
+	AU1100_GPIO208_215_INT,
+	AU1100_LCD_INT,
+	AU1100_AC97C_INT,
+	AU1100_GPIO0_INT,
+	AU1100_GPIO1_INT,
+	AU1100_GPIO2_INT,
+	AU1100_GPIO3_INT,
+	AU1100_GPIO4_INT,
+	AU1100_GPIO5_INT,
+	AU1100_GPIO6_INT,
+	AU1100_GPIO7_INT,
+	AU1100_GPIO8_INT,
+	AU1100_GPIO9_INT,
+	AU1100_GPIO10_INT,
+	AU1100_GPIO11_INT,
+	AU1100_GPIO12_INT,
+	AU1100_GPIO13_INT,
+	AU1100_GPIO14_INT,
+	AU1100_GPIO15_INT,
+	AU1100_GPIO16_INT,
+	AU1100_GPIO17_INT,
+	AU1100_GPIO18_INT,
+	AU1100_GPIO19_INT,
+	AU1100_GPIO20_INT,
+	AU1100_GPIO21_INT,
+	AU1100_GPIO22_INT,
+	AU1100_GPIO23_INT,
+	AU1100_GPIO24_INT,
+	AU1100_GPIO25_INT,
+	AU1100_GPIO26_INT,
+	AU1100_GPIO27_INT,
+	AU1100_GPIO28_INT,
+	AU1100_GPIO29_INT,
+	AU1100_GPIO30_INT,
+	AU1100_GPIO31_INT,
+};
+
+enum soc_au1500_ints {
+	AU1500_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1500_UART0_INT	= AU1500_FIRST_INT,
+	AU1500_PCI_INTA,
+	AU1500_PCI_INTB,
+	AU1500_UART3_INT,
+	AU1500_PCI_INTC,
+	AU1500_PCI_INTD,
+	AU1500_DMA_INT_BASE,
+
+	AU1500_TOY_INT		= AU1500_FIRST_INT + 14,
+	AU1500_TOY_MATCH0_INT,
+	AU1500_TOY_MATCH1_INT,
+	AU1500_TOY_MATCH2_INT,
+	AU1500_RTC_INT,
+	AU1500_RTC_MATCH0_INT,
+	AU1500_RTC_MATCH1_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1500_PCI_ERR_INT,
+	AU1500_RESERVED_INT,
+	AU1500_USB_DEV_REQ_INT,
+	AU1500_USB_DEV_SUS_INT,
+	AU1500_USB_HOST_INT,
+	AU1500_ACSYNC_INT,
+	AU1500_MAC0_DMA_INT,
+	AU1500_MAC1_DMA_INT,
+	AU1500_AC97C_INT	= AU1500_FIRST_INT + 31,
+	AU1500_GPIO0_INT,
+	AU1500_GPIO1_INT,
+	AU1500_GPIO2_INT,
+	AU1500_GPIO3_INT,
+	AU1500_GPIO4_INT,
+	AU1500_GPIO5_INT,
+	AU1500_GPIO6_INT,
+	AU1500_GPIO7_INT,
+	AU1500_GPIO8_INT,
+	AU1500_GPIO9_INT,
+	AU1500_GPIO10_INT,
+	AU1500_GPIO11_INT,
+	AU1500_GPIO12_INT,
+	AU1500_GPIO13_INT,
+	AU1500_GPIO14_INT,
+	AU1500_GPIO15_INT,
+	AU1500_GPIO200_INT,
+	AU1500_GPIO201_INT,
+	AU1500_GPIO202_INT,
+	AU1500_GPIO203_INT,
+	AU1500_GPIO20_INT,
+	AU1500_GPIO204_INT,
+	AU1500_GPIO205_INT,
+	AU1500_GPIO23_INT,
+	AU1500_GPIO24_INT,
+	AU1500_GPIO25_INT,
+	AU1500_GPIO26_INT,
+	AU1500_GPIO27_INT,
+	AU1500_GPIO28_INT,
+	AU1500_GPIO206_INT,
+	AU1500_GPIO207_INT,
+	AU1500_GPIO208_215_INT,
 };
 
-/* core calls this function to let boards initialize other IRQ sources */
-void board_init_irq(void);
+enum soc_au1550_ints {
+	AU1550_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1550_UART0_INT	= AU1550_FIRST_INT,
+	AU1550_PCI_INTA,
+	AU1550_PCI_INTB,
+	AU1550_DDMA_INT,
+	AU1550_CRYPTO_INT,
+	AU1550_PCI_INTC,
+	AU1550_PCI_INTD,
+	AU1550_PCI_RST_INT,
+	AU1550_UART1_INT,
+	AU1550_UART3_INT,
+	AU1550_PSC0_INT,
+	AU1550_PSC1_INT,
+	AU1550_PSC2_INT,
+	AU1550_PSC3_INT,
+	AU1550_TOY_INT,
+	AU1550_TOY_MATCH0_INT,
+	AU1550_TOY_MATCH1_INT,
+	AU1550_TOY_MATCH2_INT,
+	AU1550_RTC_INT,
+	AU1550_RTC_MATCH0_INT,
+	AU1550_RTC_MATCH1_INT,
+	AU1550_RTC_MATCH2_INT,
+
+	AU1550_NAND_INT		= AU1550_FIRST_INT + 23,
+	AU1550_USB_DEV_REQ_INT,
+	AU1550_USB_DEV_SUS_INT,
+	AU1550_USB_HOST_INT,
+	AU1550_MAC0_DMA_INT,
+	AU1550_MAC1_DMA_INT,
+	AU1550_GPIO0_INT	= AU1550_FIRST_INT + 32,
+	AU1550_GPIO1_INT,
+	AU1550_GPIO2_INT,
+	AU1550_GPIO3_INT,
+	AU1550_GPIO4_INT,
+	AU1550_GPIO5_INT,
+	AU1550_GPIO6_INT,
+	AU1550_GPIO7_INT,
+	AU1550_GPIO8_INT,
+	AU1550_GPIO9_INT,
+	AU1550_GPIO10_INT,
+	AU1550_GPIO11_INT,
+	AU1550_GPIO12_INT,
+	AU1550_GPIO13_INT,
+	AU1550_GPIO14_INT,
+	AU1550_GPIO15_INT,
+	AU1550_GPIO200_INT,
+	AU1550_GPIO201_205_INT,	/* Logical or of GPIO201:205 */
+	AU1550_GPIO16_INT,
+	AU1550_GPIO17_INT,
+	AU1550_GPIO20_INT,
+	AU1550_GPIO21_INT,
+	AU1550_GPIO22_INT,
+	AU1550_GPIO23_INT,
+	AU1550_GPIO24_INT,
+	AU1550_GPIO25_INT,
+	AU1550_GPIO26_INT,
+	AU1550_GPIO27_INT,
+	AU1550_GPIO28_INT,
+	AU1550_GPIO206_INT,
+	AU1550_GPIO207_INT,
+	AU1550_GPIO208_215_INT,	/* Logical or of GPIO208:215 */
+};
 
-/* boards call this to register additional (GPIO) interrupts */
-void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
+enum soc_au1200_ints {
+	AU1200_FIRST_INT	= AU1000_INTC0_INT_BASE,
+	AU1200_UART0_INT	= AU1200_FIRST_INT,
+	AU1200_SWT_INT,
+	AU1200_SD_INT,
+	AU1200_DDMA_INT,
+	AU1200_MAE_BE_INT,
+	AU1200_GPIO200_INT,
+	AU1200_GPIO201_INT,
+	AU1200_GPIO202_INT,
+	AU1200_UART1_INT,
+	AU1200_MAE_FE_INT,
+	AU1200_PSC0_INT,
+	AU1200_PSC1_INT,
+	AU1200_AES_INT,
+	AU1200_CAMERA_INT,
+	AU1200_TOY_INT,
+	AU1200_TOY_MATCH0_INT,
+	AU1200_TOY_MATCH1_INT,
+	AU1200_TOY_MATCH2_INT,
+	AU1200_RTC_INT,
+	AU1200_RTC_MATCH0_INT,
+	AU1200_RTC_MATCH1_INT,
+	AU1200_RTC_MATCH2_INT,
+	AU1200_GPIO203_INT,
+	AU1200_NAND_INT,
+	AU1200_GPIO204_INT,
+	AU1200_GPIO205_INT,
+	AU1200_GPIO206_INT,
+	AU1200_GPIO207_INT,
+	AU1200_GPIO208_215_INT,	/* Logical OR of 208:215 */
+	AU1200_USB_INT,
+	AU1200_LCD_INT,
+	AU1200_MAE_BOTH_INT,
+	AU1200_GPIO0_INT,
+	AU1200_GPIO1_INT,
+	AU1200_GPIO2_INT,
+	AU1200_GPIO3_INT,
+	AU1200_GPIO4_INT,
+	AU1200_GPIO5_INT,
+	AU1200_GPIO6_INT,
+	AU1200_GPIO7_INT,
+	AU1200_GPIO8_INT,
+	AU1200_GPIO9_INT,
+	AU1200_GPIO10_INT,
+	AU1200_GPIO11_INT,
+	AU1200_GPIO12_INT,
+	AU1200_GPIO13_INT,
+	AU1200_GPIO14_INT,
+	AU1200_GPIO15_INT,
+	AU1200_GPIO16_INT,
+	AU1200_GPIO17_INT,
+	AU1200_GPIO18_INT,
+	AU1200_GPIO19_INT,
+	AU1200_GPIO20_INT,
+	AU1200_GPIO21_INT,
+	AU1200_GPIO22_INT,
+	AU1200_GPIO23_INT,
+	AU1200_GPIO24_INT,
+	AU1200_GPIO25_INT,
+	AU1200_GPIO26_INT,
+	AU1200_GPIO27_INT,
+	AU1200_GPIO28_INT,
+	AU1200_GPIO29_INT,
+	AU1200_GPIO30_INT,
+	AU1200_GPIO31_INT,
+};
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
@@ -473,6 +834,38 @@ void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
 #define MEM_STNAND_DATA 	0x20
 #endif
 
+
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD		0x40
+#define IC_CFG0SET		0x40
+#define IC_CFG0CLR		0x44
+#define IC_CFG1RD		0x48
+#define IC_CFG1SET		0x48
+#define IC_CFG1CLR		0x4C
+#define IC_CFG2RD		0x50
+#define IC_CFG2SET		0x50
+#define IC_CFG2CLR		0x54
+#define IC_REQ0INT		0x54
+#define IC_SRCRD		0x58
+#define IC_SRCSET		0x58
+#define IC_SRCCLR		0x5C
+#define IC_REQ1INT		0x5C
+#define IC_ASSIGNRD		0x60
+#define IC_ASSIGNSET		0x60
+#define IC_ASSIGNCLR		0x64
+#define IC_WAKERD		0x68
+#define IC_WAKESET		0x68
+#define IC_WAKECLR		0x6C
+#define IC_MASKRD		0x70
+#define IC_MASKSET		0x70
+#define IC_MASKCLR		0x74
+#define IC_RISINGRD		0x78
+#define IC_RISINGCLR		0x78
+#define IC_FALLINGRD		0x7C
+#define IC_FALLINGCLR		0x7C
+#define IC_TESTBIT		0x80
+
+
 /* Interrupt Controller 0 */
 #define IC0_CFG0RD		0xB0400040
 #define IC0_CFG0SET		0xB0400040
@@ -549,78 +942,16 @@ void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
 
 #define IC1_TESTBIT		0xB1800080
 
-/* Interrupt Numbers */
+
 /* Au1000 */
 #ifdef CONFIG_SOC_AU1000
-enum soc_au1000_ints {
-	AU1000_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1000_UART0_INT	= AU1000_FIRST_INT,
-	AU1000_UART1_INT,				/* au1000 */
-	AU1000_UART2_INT,				/* au1000 */
-	AU1000_UART3_INT,
-	AU1000_SSI0_INT,				/* au1000 */
-	AU1000_SSI1_INT,				/* au1000 */
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1000_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1000_IRDA_TX_INT,				/* au1000 */
-	AU1000_IRDA_RX_INT,				/* au1000 */
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1000_MAC0_DMA_INT,
-	AU1000_MAC1_DMA_INT,
-	AU1000_I2S_UO_INT,				/* au1000 */
-	AU1000_AC97C_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
-#define UART2_ADDR		0xB1300000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
 
 #define AU1000_ETH0_BASE	0xB0500000
 #define AU1000_ETH1_BASE	0xB0510000
@@ -631,78 +962,13 @@ enum soc_au1000_ints {
 
 /* Au1500 */
 #ifdef CONFIG_SOC_AU1500
-enum soc_au1500_ints {
-	AU1500_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1500_UART0_INT	= AU1500_FIRST_INT,
-	AU1000_PCI_INTA,				/* au1500 */
-	AU1000_PCI_INTB,				/* au1500 */
-	AU1500_UART3_INT,
-	AU1000_PCI_INTC,				/* au1500 */
-	AU1000_PCI_INTD,				/* au1500 */
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1500_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1500_PCI_ERR_INT,
-	AU1500_RESERVED_INT,
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1500_MAC0_DMA_INT,
-	AU1500_MAC1_DMA_INT,
-	AU1000_AC97C_INT	= AU1500_FIRST_INT + 31,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1500_GPIO_200,
-	AU1500_GPIO_201,
-	AU1500_GPIO_202,
-	AU1500_GPIO_203,
-	AU1500_GPIO_20,
-	AU1500_GPIO_204,
-	AU1500_GPIO_205,
-	AU1500_GPIO_23,
-	AU1500_GPIO_24,
-	AU1500_GPIO_25,
-	AU1500_GPIO_26,
-	AU1500_GPIO_27,
-	AU1500_GPIO_28,
-	AU1500_GPIO_206,
-	AU1500_GPIO_207,
-	AU1500_GPIO_208_215,
-};
-
-/* shortcuts */
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
 
 #define UART0_ADDR		0xB1100000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017fffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
 
 #define AU1500_ETH0_BASE	0xB1500000
 #define AU1500_ETH1_BASE	0xB1510000
@@ -713,74 +979,13 @@ enum soc_au1500_ints {
 
 /* Au1100 */
 #ifdef CONFIG_SOC_AU1100
-enum soc_au1100_ints {
-	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT	= AU1100_FIRST_INT,
-	AU1100_UART1_INT,
-	AU1100_SD_INT,
-	AU1100_UART3_INT,
-	AU1000_SSI0_INT,
-	AU1000_SSI1_INT,
-	AU1000_DMA_INT_BASE,
-
-	AU1000_TOY_INT		= AU1100_FIRST_INT + 14,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1000_IRDA_TX_INT,
-	AU1000_IRDA_RX_INT,
-	AU1000_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_SUS_INT,
-	AU1000_USB_HOST_INT,
-	AU1000_ACSYNC_INT,
-	AU1100_MAC0_DMA_INT,
-	AU1100_GPIO_208_215,
-	AU1100_LCD_INT,
-	AU1000_AC97C_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
 #define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x10100000	/* phys addr for ioremap */
 #define USB_HOST_CONFIG 	0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
 
 #define AU1100_ETH0_BASE	0xB0500000
 #define AU1100_MAC0_ENABLE	0xB0520000
@@ -788,87 +993,12 @@ enum soc_au1100_ints {
 #endif /* CONFIG_SOC_AU1100 */
 
 #ifdef CONFIG_SOC_AU1550
-enum soc_au1550_ints {
-	AU1550_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1550_UART0_INT	= AU1550_FIRST_INT,
-	AU1550_PCI_INTA,
-	AU1550_PCI_INTB,
-	AU1550_DDMA_INT,
-	AU1550_CRYPTO_INT,
-	AU1550_PCI_INTC,
-	AU1550_PCI_INTD,
-	AU1550_PCI_RST_INT,
-	AU1550_UART1_INT,
-	AU1550_UART3_INT,
-	AU1550_PSC0_INT,
-	AU1550_PSC1_INT,
-	AU1550_PSC2_INT,
-	AU1550_PSC3_INT,
-	AU1000_TOY_INT,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-
-	AU1550_NAND_INT			= AU1550_FIRST_INT + 23,
-	AU1550_USB_DEV_REQ_INT,
-	AU1000_USB_DEV_REQ_INT		= AU1550_USB_DEV_REQ_INT,
-	AU1550_USB_DEV_SUS_INT,
-	AU1000_USB_DEV_SUS_INT		= AU1550_USB_DEV_SUS_INT,
-	AU1550_USB_HOST_INT,
-	AU1000_USB_HOST_INT		= AU1550_USB_HOST_INT,
-	AU1550_MAC0_DMA_INT,
-	AU1550_MAC1_DMA_INT,
-	AU1000_GPIO_0			= AU1550_FIRST_INT + 32,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1550_GPIO_200,
-	AU1500_GPIO_201_205,			/* Logical or of GPIO201:205 */
-	AU1500_GPIO_16,
-	AU1500_GPIO_17,
-	AU1500_GPIO_20,
-	AU1500_GPIO_21,
-	AU1500_GPIO_22,
-	AU1500_GPIO_23,
-	AU1500_GPIO_24,
-	AU1500_GPIO_25,
-	AU1500_GPIO_26,
-	AU1500_GPIO_27,
-	AU1500_GPIO_28,
-	AU1500_GPIO_206,
-	AU1500_GPIO_207,
-	AU1500_GPIO_208_218,			/* Logical or of GPIO208:218 */
-};
-
-/* shortcuts */
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
-#define UART3_ADDR		0xB1400000
 
 #define USB_OHCI_BASE		0x14020000	/* phys addr for ioremap */
 #define USB_OHCI_LEN		0x00060000
 #define USB_HOST_CONFIG 	0xB4027ffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
 
 #define AU1550_ETH0_BASE	0xB0500000
 #define AU1550_ETH1_BASE	0xB0510000
@@ -877,78 +1007,10 @@ enum soc_au1550_ints {
 #define NUM_ETH_INTERFACES 2
 #endif /* CONFIG_SOC_AU1550 */
 
+
 #ifdef CONFIG_SOC_AU1200
-enum soc_au1200_ints {
-	AU1200_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1200_UART0_INT	= AU1200_FIRST_INT,
-	AU1200_SWT_INT,
-	AU1200_SD_INT,
-	AU1200_DDMA_INT,
-	AU1200_MAE_BE_INT,
-	AU1200_GPIO_200,
-	AU1200_GPIO_201,
-	AU1200_GPIO_202,
-	AU1200_UART1_INT,
-	AU1200_MAE_FE_INT,
-	AU1200_PSC0_INT,
-	AU1200_PSC1_INT,
-	AU1200_AES_INT,
-	AU1200_CAMERA_INT,
-	AU1000_TOY_INT,
-	AU1000_TOY_MATCH0_INT,
-	AU1000_TOY_MATCH1_INT,
-	AU1000_TOY_MATCH2_INT,
-	AU1000_RTC_INT,
-	AU1000_RTC_MATCH0_INT,
-	AU1000_RTC_MATCH1_INT,
-	AU1000_RTC_MATCH2_INT,
-	AU1200_GPIO_203,
-	AU1200_NAND_INT,
-	AU1200_GPIO_204,
-	AU1200_GPIO_205,
-	AU1200_GPIO_206,
-	AU1200_GPIO_207,
-	AU1200_GPIO_208_215,			/* Logical OR of 208:215 */
-	AU1200_USB_INT,
-	AU1000_USB_HOST_INT	= AU1200_USB_INT,
-	AU1200_LCD_INT,
-	AU1200_MAE_BOTH_INT,
-	AU1000_GPIO_0,
-	AU1000_GPIO_1,
-	AU1000_GPIO_2,
-	AU1000_GPIO_3,
-	AU1000_GPIO_4,
-	AU1000_GPIO_5,
-	AU1000_GPIO_6,
-	AU1000_GPIO_7,
-	AU1000_GPIO_8,
-	AU1000_GPIO_9,
-	AU1000_GPIO_10,
-	AU1000_GPIO_11,
-	AU1000_GPIO_12,
-	AU1000_GPIO_13,
-	AU1000_GPIO_14,
-	AU1000_GPIO_15,
-	AU1000_GPIO_16,
-	AU1000_GPIO_17,
-	AU1000_GPIO_18,
-	AU1000_GPIO_19,
-	AU1000_GPIO_20,
-	AU1000_GPIO_21,
-	AU1000_GPIO_22,
-	AU1000_GPIO_23,
-	AU1000_GPIO_24,
-	AU1000_GPIO_25,
-	AU1000_GPIO_26,
-	AU1000_GPIO_27,
-	AU1000_GPIO_28,
-	AU1000_GPIO_29,
-	AU1000_GPIO_30,
-	AU1000_GPIO_31,
-};
 
 #define UART0_ADDR		0xB1100000
-#define UART1_ADDR		0xB1200000
 
 #define USB_UOC_BASE		0x14020020
 #define USB_UOC_LEN		0x20
@@ -974,15 +1036,9 @@ enum soc_au1200_ints {
 #define USBMSRMCFG_RDCOMB	30
 #define USBMSRMCFG_PFEN 	31
 
-#endif /* CONFIG_SOC_AU1200 */
+#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
 
-#define AU1000_INTC0_INT_BASE	(MIPS_CPU_IRQ_BASE + 8)
-#define AU1000_INTC0_INT_LAST	(AU1000_INTC0_INT_BASE + 31)
-#define AU1000_INTC1_INT_BASE	(AU1000_INTC0_INT_BASE + 32)
-#define AU1000_INTC1_INT_LAST	(AU1000_INTC1_INT_BASE + 31)
-
-#define AU1000_MAX_INTR 	AU1000_INTC1_INT_LAST
-#define INTX			0xFF			/* not valid */
+#endif /* CONFIG_SOC_AU1200 */
 
 /* Programmable Counters 0 and 1 */
 #define SYS_BASE		0xB1900000
@@ -1231,14 +1287,6 @@ enum soc_au1200_ints {
 #define MAC_RX_BUFF3_STATUS	0x30
 #define MAC_RX_BUFF3_ADDR	0x34
 
-/* UARTS 0-3 */
-#define UART_BASE		UART0_ADDR
-#ifdef	CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE 	UART1_ADDR
-#else
-#define UART_DEBUG_BASE 	UART3_ADDR
-#endif
-
 #define UART_RX		0	/* Receive buffer */
 #define UART_TX		4	/* Transmit buffer */
 #define UART_IER	8	/* Interrupt Enable Register */
@@ -1251,84 +1299,6 @@ enum soc_au1200_ints {
 #define UART_CLK	0x28	/* Baud Rate Clock Divider */
 #define UART_MOD_CNTRL	0x100	/* Module Control */
 
-#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK	0xF0 /* Mask for the FIFO trigger range */
-#define UART_FCR_R_TRIGGER_1	0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR_R_TRIGGER_4	0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR_R_TRIGGER_8	0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR_R_TRIGGER_14   0xA0 /* Mask for receive trigger set at 14 */
-#define UART_FCR_T_TRIGGER_0	0x00 /* Mask for transmit trigger set at 0 */
-#define UART_FCR_T_TRIGGER_4	0x10 /* Mask for transmit trigger set at 4 */
-#define UART_FCR_T_TRIGGER_8    0x20 /* Mask for transmit trigger set at 8 */
-#define UART_FCR_T_TRIGGER_12	0x30 /* Mask for transmit trigger set at 12 */
-
-/*
- * These are the definitions for the Line Control Register
- */
-#define UART_LCR_SBC	0x40	/* Set break control */
-#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-#define UART_LCR_EPAR	0x10	/* Even parity select */
-#define UART_LCR_PARITY	0x08	/* Parity Enable */
-#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT	0x40	/* Transmitter empty */
-#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-#define UART_LSR_BI	0x10	/* Break interrupt indicator */
-#define UART_LSR_FE	0x08	/* Frame error indicator */
-#define UART_LSR_PE	0x04	/* Parity error indicator */
-#define UART_LSR_OE	0x02	/* Overrun error indicator */
-#define UART_LSR_DR	0x01	/* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
-#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
-#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
-#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-#define UART_MCR_OUT2	0x08	/* Out2 complement */
-#define UART_MCR_OUT1	0x04	/* Out1 complement */
-#define UART_MCR_RTS	0x02	/* RTS complement */
-#define UART_MCR_DTR	0x01	/* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
-#define UART_MSR_RI	0x40	/* Ring Indicator */
-#define UART_MSR_DSR	0x20	/* Data Set Ready */
-#define UART_MSR_CTS	0x10	/* Clear to Send */
-#define UART_MSR_DDCD	0x08	/* Delta DCD */
-#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
-#define UART_MSR_DDSR	0x02	/* Delta DSR */
-#define UART_MSR_DCTS	0x01	/* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-
 /* SSIO */
 #define SSI0_STATUS		0xB1600000
 #  define SSI_STATUS_BF 	(1 << 4)
@@ -1720,7 +1690,7 @@ enum soc_au1200_ints {
 #define IOPORT_RESOURCE_START	0x00001000	/* skip legacy probing */
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_END	0xfffffffffULL
 
 #else /* Au1000 and Au1100 and Au1200 */
 
@@ -1728,7 +1698,7 @@ enum soc_au1200_ints {
 #define IOPORT_RESOURCE_START	0x10000000
 #define IOPORT_RESOURCE_END	0xffffffff
 #define IOMEM_RESOURCE_START	0x10000000
-#define IOMEM_RESOURCE_END	0xffffffff
+#define IOMEM_RESOURCE_END	0xfffffffffULL
 
 #define PCI_IO_START	0
 #define PCI_IO_END	0
@@ -1739,53 +1709,4 @@ enum soc_au1200_ints {
 
 #endif
 
-#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct {
-	/* 0x0000 */ u32 toytrim;
-	/* 0x0004 */ u32 toywrite;
-	/* 0x0008 */ u32 toymatch0;
-	/* 0x000C */ u32 toymatch1;
-	/* 0x0010 */ u32 toymatch2;
-	/* 0x0014 */ u32 cntrctrl;
-	/* 0x0018 */ u32 scratch0;
-	/* 0x001C */ u32 scratch1;
-	/* 0x0020 */ u32 freqctrl0;
-	/* 0x0024 */ u32 freqctrl1;
-	/* 0x0028 */ u32 clksrc;
-	/* 0x002C */ u32 pinfunc;
-	/* 0x0030 */ u32 reserved0;
-	/* 0x0034 */ u32 wakemsk;
-	/* 0x0038 */ u32 endian;
-	/* 0x003C */ u32 powerctrl;
-	/* 0x0040 */ u32 toyread;
-	/* 0x0044 */ u32 rtctrim;
-	/* 0x0048 */ u32 rtcwrite;
-	/* 0x004C */ u32 rtcmatch0;
-	/* 0x0050 */ u32 rtcmatch1;
-	/* 0x0054 */ u32 rtcmatch2;
-	/* 0x0058 */ u32 rtcread;
-	/* 0x005C */ u32 wakesrc;
-	/* 0x0060 */ u32 cpupll;
-	/* 0x0064 */ u32 auxpll;
-	/* 0x0068 */ u32 reserved1;
-	/* 0x006C */ u32 reserved2;
-	/* 0x0070 */ u32 reserved3;
-	/* 0x0074 */ u32 reserved4;
-	/* 0x0078 */ u32 slppwr;
-	/* 0x007C */ u32 sleep;
-	/* 0x0080 */ u32 reserved5[32];
-	/* 0x0100 */ u32 trioutrd;
-#define trioutclr trioutrd
-	/* 0x0104 */ u32 reserved6;
-	/* 0x0108 */ u32 outputrd;
-#define outputset outputrd
-	/* 0x010C */ u32 outputclr;
-	/* 0x0110 */ u32 pinstaterd;
-#define pininputen pinstaterd
-} AU1X00_SYS;
-
-static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
-
-#endif
-
 #endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
index c35e209..94000a3 100644
--- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -46,6 +46,7 @@ struct au1xmmc_platform_data {
 	int(*card_readonly)(void *mmc_host);
 	void(*set_power)(void *mmc_host, int state);
 	struct led_classdev *led;
+	unsigned long mask_host_caps;
 };
 
 #define SD0_BASE	0xB0600000
@@ -205,4 +206,3 @@ struct au1xmmc_platform_data {
 
 
 #endif /* __ASM_AU1100_MMC_H */
-
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 06f68f4..c8a553a3 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -305,6 +305,7 @@ typedef struct dbdma_chan_config {
 	dbdev_tab_t		*chan_dest;
 	au1x_dma_chan_t		*chan_ptr;
 	au1x_ddma_desc_t	*chan_desc_base;
+	u32			cdb_membase; /* kmalloc base of above */
 	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
 	void			*chan_callparam;
 	void			(*chan_callback)(int, void *);
@@ -338,8 +339,8 @@ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
 u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
 
 /* Put buffers on source/destination descriptors. */
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
-u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
 
 /* Get a buffer from the destination descriptor. */
 u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
@@ -357,29 +358,6 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
 extern void au1xxx_ddma_del_device(u32 devid);
 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void);
-void au1xxx_dbdma_resume(void);
-#endif
-
-
-/*
- * Some compatibilty macros -- needed to make changes to API
- * without breaking existing drivers.
- */
-#define au1xxx_dbdma_put_source(chanid, buf, nbytes)			\
-	_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)	\
-	_au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-#define put_source_flags(chanid, buf, nbytes, flags)			\
-	au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
-
-#define au1xxx_dbdma_put_dest(chanid, buf, nbytes)			\
-	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) 	\
-	_au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-#define put_dest_flags(chanid, buf, nbytes, flags)			\
-	au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
 
 /*
  *	Flags for the put_source/put_dest functions.
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
new file mode 100644
index 0000000..bae9b75
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -0,0 +1,17 @@
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+	int phy_static_config;
+	int phy_search_highest_addr;
+	int phy1_search_mac0;
+	int phy_addr;
+	int phy_busid;
+	int phy_irq;
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+			struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 91595fa..62d2f13 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -35,15 +35,13 @@ static inline int au1000_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1000
 static inline int au1000_irq_to_gpio(int irq)
 {
-	if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31))
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
+	if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1500_gpio1_to_irq(int gpio)
 {
@@ -71,27 +69,25 @@ static inline int au1500_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1500
 static inline int au1500_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_15:
-	case AU1500_GPIO_20:
-	case AU1500_GPIO_23 ... AU1500_GPIO_28:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1500_GPIO_200 ... AU1500_GPIO_203:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0;
-	case AU1500_GPIO_204 ... AU1500_GPIO_205:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4;
-	case AU1500_GPIO_206 ... AU1500_GPIO_207:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
-	case AU1500_GPIO_208_215:
+	case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+	case AU1500_GPIO20_INT:
+	case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+	case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+	case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+	case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+	case AU1500_GPIO208_215_INT:
 		return ALCHEMY_GPIO2_BASE + 8;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1100_gpio1_to_irq(int gpio)
 {
@@ -108,19 +104,17 @@ static inline int au1100_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1100
 static inline int au1100_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_31:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1100_GPIO_208_215:
+	case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+	case AU1100_GPIO208_215_INT:
 		return ALCHEMY_GPIO2_BASE + 8;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1550_gpio1_to_irq(int gpio)
 {
@@ -149,24 +143,22 @@ static inline int au1550_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1550
 static inline int au1550_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_15:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1550_GPIO_200:
-	case AU1500_GPIO_201_205:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0;
-	case AU1500_GPIO_16 ... AU1500_GPIO_28:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16;
-	case AU1500_GPIO_206 ... AU1500_GPIO_208_218:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
+	case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+	case AU1550_GPIO200_INT:
+	case AU1550_GPIO201_205_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+	case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+	case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 static inline int au1200_gpio1_to_irq(int gpio)
 {
@@ -187,23 +179,21 @@ static inline int au1200_gpio2_to_irq(int gpio)
 	return -ENXIO;
 }
 
-#ifdef CONFIG_SOC_AU1200
 static inline int au1200_irq_to_gpio(int irq)
 {
 	switch (irq) {
-	case AU1000_GPIO_0 ... AU1000_GPIO_31:
-		return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
-	case AU1200_GPIO_200 ... AU1200_GPIO_202:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0;
-	case AU1200_GPIO_203:
+	case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+		return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+	case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+	case AU1200_GPIO203_INT:
 		return ALCHEMY_GPIO2_BASE + 3;
-	case AU1200_GPIO_204 ... AU1200_GPIO_208_215:
-		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4;
+	case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+		return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
 	}
 
 	return -ENXIO;
 }
-#endif
 
 /*
  * GPIO1 block macros for common linux gpio functions.
@@ -246,19 +236,19 @@ static inline int alchemy_gpio1_is_valid(int gpio)
 
 static inline int alchemy_gpio1_to_irq(int gpio)
 {
-#if defined(CONFIG_SOC_AU1000)
-	return au1000_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1100)
-	return au1100_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1500)
-	return au1500_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1550)
-	return au1550_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1200)
-	return au1200_gpio1_to_irq(gpio);
-#else
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio1_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio1_to_irq(gpio);
+	}
 	return -ENXIO;
-#endif
 }
 
 /*
@@ -316,19 +306,19 @@ static inline int alchemy_gpio2_is_valid(int gpio)
 
 static inline int alchemy_gpio2_to_irq(int gpio)
 {
-#if defined(CONFIG_SOC_AU1000)
-	return au1000_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1100)
-	return au1100_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1500)
-	return au1500_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1550)
-	return au1550_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1200)
-	return au1200_gpio2_to_irq(gpio);
-#else
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_gpio2_to_irq(gpio);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_gpio2_to_irq(gpio);
+	}
 	return -ENXIO;
-#endif
 }
 
 /**********************************************************************/
@@ -384,10 +374,13 @@ static inline void alchemy_gpio2_enable_int(int gpio2)
 
 	gpio2 -= ALCHEMY_GPIO2_BASE;
 
-#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
 	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
-	gpio2 -= 8;
-#endif
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
 	local_irq_save(flags);
 	__alchemy_gpio2_mod_int(gpio2, 1);
 	local_irq_restore(flags);
@@ -405,10 +398,13 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
 
 	gpio2 -= ALCHEMY_GPIO2_BASE;
 
-#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
 	/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
-	gpio2 -= 8;
-#endif
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1100:
+	case ALCHEMY_CPU_AU1500:
+		gpio2 -= 8;
+	}
+
 	local_irq_save(flags);
 	__alchemy_gpio2_mod_int(gpio2, 0);
 	local_irq_restore(flags);
@@ -494,19 +490,19 @@ static inline int alchemy_gpio_to_irq(int gpio)
 
 static inline int alchemy_irq_to_gpio(int irq)
 {
-#if defined(CONFIG_SOC_AU1000)
-	return au1000_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1100)
-	return au1100_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1500)
-	return au1500_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1550)
-	return au1550_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1200)
-	return au1200_irq_to_gpio(irq);
-#else
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		return au1000_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1100:
+		return au1100_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1500:
+		return au1500_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1550:
+		return au1550_irq_to_gpio(irq);
+	case ALCHEMY_CPU_AU1200:
+		return au1200_irq_to_gpio(irq);
+	}
 	return -ENXIO;
-#endif
 }
 
 /**********************************************************************/
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
index f9b7d41..c3f60cd 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -1,7 +1,7 @@
 #ifndef _ALCHEMY_GPIO_H_
 #define _ALCHEMY_GPIO_H_
 
-#if defined(CONFIG_ALCHEMY_GPIO_AU1000)
+#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
 
 #include <asm/mach-au1x00/gpio-au1000.h>
 
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
index 364cea2..75a94ad 100644
--- a/arch/mips/include/asm/mach-au1x00/ioremap.h
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -11,7 +11,7 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
 extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
 #else
 static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h
index e387155..4c0e09c 100644
--- a/arch/mips/include/asm/mach-au1x00/prom.h
+++ b/arch/mips/include/asm/mach-au1x00/prom.h
@@ -6,7 +6,6 @@ extern char **prom_argv;
 extern char **prom_envp;
 
 extern void prom_init_cmdline(void);
-extern char *prom_getcmdline(void);
 extern char *prom_getenv(char *envname);
 extern int prom_get_ethernet_addr(char *ethernet_addr);
 
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
new file mode 100644
index 0000000..0d8cc14
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2005, Broadcom Corporation
+ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+#include <linux/types.h>
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
+#define NVRAM_VERSION		1
+#define NVRAM_HEADER_SIZE	20
+#define NVRAM_SPACE		0x8000
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+extern int nvram_getenv(char *name, char *val, size_t val_len);
+
+#endif
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index b12c4ac..96a2391 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -85,6 +85,7 @@ enum bcm63xx_regs_set {
 	RSET_TIMER,
 	RSET_WDT,
 	RSET_UART0,
+	RSET_UART1,
 	RSET_GPIO,
 	RSET_SPI,
 	RSET_UDC0,
@@ -123,6 +124,7 @@ enum bcm63xx_regs_set {
 #define BCM_6338_TIMER_BASE		(0xfffe0200)
 #define BCM_6338_WDT_BASE		(0xfffe021c)
 #define BCM_6338_UART0_BASE		(0xfffe0300)
+#define BCM_6338_UART1_BASE		(0xdeadbeef)
 #define BCM_6338_GPIO_BASE		(0xfffe0400)
 #define BCM_6338_SPI_BASE		(0xfffe0c00)
 #define BCM_6338_UDC0_BASE		(0xdeadbeef)
@@ -153,6 +155,7 @@ enum bcm63xx_regs_set {
 #define BCM_6345_TIMER_BASE		(0xfffe0200)
 #define BCM_6345_WDT_BASE		(0xfffe021c)
 #define BCM_6345_UART0_BASE		(0xfffe0300)
+#define BCM_6345_UART1_BASE		(0xdeadbeef)
 #define BCM_6345_GPIO_BASE		(0xfffe0400)
 #define BCM_6345_SPI_BASE		(0xdeadbeef)
 #define BCM_6345_UDC0_BASE		(0xdeadbeef)
@@ -182,6 +185,7 @@ enum bcm63xx_regs_set {
 #define BCM_6348_TIMER_BASE		(0xfffe0200)
 #define BCM_6348_WDT_BASE		(0xfffe021c)
 #define BCM_6348_UART0_BASE		(0xfffe0300)
+#define BCM_6348_UART1_BASE		(0xdeadbeef)
 #define BCM_6348_GPIO_BASE		(0xfffe0400)
 #define BCM_6348_SPI_BASE		(0xfffe0c00)
 #define BCM_6348_UDC0_BASE		(0xfffe1000)
@@ -208,6 +212,7 @@ enum bcm63xx_regs_set {
 #define BCM_6358_TIMER_BASE		(0xfffe0040)
 #define BCM_6358_WDT_BASE		(0xfffe005c)
 #define BCM_6358_UART0_BASE		(0xfffe0100)
+#define BCM_6358_UART1_BASE		(0xfffe0120)
 #define BCM_6358_GPIO_BASE		(0xfffe0080)
 #define BCM_6358_SPI_BASE		(0xdeadbeef)
 #define BCM_6358_UDC0_BASE		(0xfffe0800)
@@ -246,6 +251,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 		return BCM_6338_WDT_BASE;
 	case RSET_UART0:
 		return BCM_6338_UART0_BASE;
+	case RSET_UART1:
+		return BCM_6338_UART1_BASE;
 	case RSET_GPIO:
 		return BCM_6338_GPIO_BASE;
 	case RSET_SPI:
@@ -292,6 +299,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 		return BCM_6345_WDT_BASE;
 	case RSET_UART0:
 		return BCM_6345_UART0_BASE;
+	case RSET_UART1:
+		return BCM_6345_UART1_BASE;
 	case RSET_GPIO:
 		return BCM_6345_GPIO_BASE;
 	case RSET_SPI:
@@ -338,6 +347,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 		return BCM_6348_WDT_BASE;
 	case RSET_UART0:
 		return BCM_6348_UART0_BASE;
+	case RSET_UART1:
+		return BCM_6348_UART1_BASE;
 	case RSET_GPIO:
 		return BCM_6348_GPIO_BASE;
 	case RSET_SPI:
@@ -384,6 +395,8 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 		return BCM_6358_WDT_BASE;
 	case RSET_UART0:
 		return BCM_6358_UART0_BASE;
+	case RSET_UART1:
+		return BCM_6358_UART1_BASE;
 	case RSET_GPIO:
 		return BCM_6358_GPIO_BASE;
 	case RSET_SPI:
@@ -429,6 +442,7 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 enum bcm63xx_irq {
 	IRQ_TIMER = 0,
 	IRQ_UART0,
+	IRQ_UART1,
 	IRQ_DSL,
 	IRQ_ENET0,
 	IRQ_ENET1,
@@ -510,6 +524,7 @@ enum bcm63xx_irq {
  */
 #define BCM_6358_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
 #define BCM_6358_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_UART1_IRQ		(IRQ_INTERNAL_BASE + 3)
 #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
 #define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 0000000..23c705b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(unsigned int id);
+
+#endif /* BCM63XX_DEV_UART_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
index 76a0b72..3999ec0 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -10,13 +10,17 @@ static inline unsigned long bcm63xx_gpio_count(void)
 	switch (bcm63xx_get_cpu_id()) {
 	case BCM6358_CPU_ID:
 		return 40;
+	case BCM6338_CPU_ID:
+		return 8;
+	case BCM6345_CPU_ID:
+		return 16;
 	case BCM6348_CPU_ID:
 	default:
 		return 37;
 	}
 }
 
-#define GPIO_DIR_OUT	0x0
-#define GPIO_DIR_IN	0x1
+#define BCM63XX_GPIO_DIR_OUT	0x0
+#define BCM63XX_GPIO_DIR_IN	0x1
 
 #endif /* !BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index ed4ccec..85fd275 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -770,4 +770,3 @@
 #define DMIPSPLLCFG_N2_MASK		(0x7 << DMIPSPLLCFG_N2_SHIFT)
 
 #endif /* BCM63XX_REGS_H_ */
-
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
index 6479090..474daaa 100644
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -45,6 +45,8 @@ struct board_info {
 	unsigned int	has_ohci0:1;
 	unsigned int	has_ehci0:1;
 	unsigned int	has_dsp:1;
+	unsigned int	has_uart0:1;
+	unsigned int	has_uart1:1;
 
 	/* ethernet config */
 	struct bcm63xx_enet_platform_data enet0;
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
index 71742bac..f453c01 100644
--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -24,7 +24,7 @@
 #define cpu_has_smartmips		0
 #define cpu_has_vtag_icache		0
 
-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
 #define cpu_has_dc_aliases		0
 #endif
 
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
index 7cda8c0..1eb534d 100644
--- a/arch/mips/include/asm/mach-bcm63xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -3,7 +3,7 @@
 
 #include <bcm63xx_gpio.h>
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 425e708..bbf0540 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -58,6 +58,9 @@
 #define cpu_has_vint		0
 #define cpu_has_veic		0
 #define cpu_hwrena_impl_bits	0xc0000000
+
+#define kernel_uses_smartmips_rixi (cpu_data[0].cputype == CPU_CAVIUM_OCTEON_PLUS)
+
 #define ARCH_HAS_READ_CURRENT_TIMER 1
 #define ARCH_HAS_IRQ_PER_CPU	1
 #define ARCH_HAS_SPINLOCK_PREFETCH 1
diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h
new file mode 100644
index 0000000..618d2de
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/bcsr.h
@@ -0,0 +1,238 @@
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address and bit meanings in the RESETS and BOARD
+ * registers.
+ *
+ * All data taken from the official AMD board documentation sheets.
+ */
+
+#ifndef _DB1XXX_BCSR_H_
+#define _DB1XXX_BCSR_H_
+
+
+/* BCSR base addresses on various boards. BCSR base 2 refers to the
+ * physical address of the first HEXLEDS register, which is usually
+ * a variable offset from the WHOAMI register.
+ */
+
+/* DB1000, DB1100, DB1500, PB1100, PB1500 */
+#define DB1000_BCSR_PHYS_ADDR	0x0E000000
+#define DB1000_BCSR_HEXLED_OFS	0x01000000
+
+#define DB1550_BCSR_PHYS_ADDR	0x0F000000
+#define DB1550_BCSR_HEXLED_OFS	0x00400000
+
+#define PB1550_BCSR_PHYS_ADDR	0x0F000000
+#define PB1550_BCSR_HEXLED_OFS	0x00800000
+
+#define DB1200_BCSR_PHYS_ADDR	0x19800000
+#define DB1200_BCSR_HEXLED_OFS	0x00400000
+
+#define PB1200_BCSR_PHYS_ADDR	0x0D800000
+#define PB1200_BCSR_HEXLED_OFS	0x00400000
+
+
+enum bcsr_id {
+	/* BCSR base 1 */
+	BCSR_WHOAMI	= 0,
+	BCSR_STATUS,
+	BCSR_SWITCHES,
+	BCSR_RESETS,
+	BCSR_PCMCIA,
+	BCSR_BOARD,
+	BCSR_LEDS,
+	BCSR_SYSTEM,
+	/* Au1200/1300 based boards */
+	BCSR_INTCLR,
+	BCSR_INTSET,
+	BCSR_MASKCLR,
+	BCSR_MASKSET,
+	BCSR_SIGSTAT,
+	BCSR_INTSTAT,
+
+	/* BCSR base 2 */
+	BCSR_HEXLEDS,
+	BCSR_RSVD1,
+	BCSR_HEXCLEAR,
+
+	BCSR_CNT,
+};
+
+/* register offsets, valid for all Db1xxx/Pb1xxx boards */
+#define BCSR_REG_WHOAMI		0x00
+#define BCSR_REG_STATUS		0x04
+#define BCSR_REG_SWITCHES	0x08
+#define BCSR_REG_RESETS		0x0c
+#define BCSR_REG_PCMCIA		0x10
+#define BCSR_REG_BOARD		0x14
+#define BCSR_REG_LEDS		0x18
+#define BCSR_REG_SYSTEM		0x1c
+/* Au1200/Au1300 based boards: CPLD IRQ muxer */
+#define BCSR_REG_INTCLR		0x20
+#define BCSR_REG_INTSET		0x24
+#define BCSR_REG_MASKCLR	0x28
+#define BCSR_REG_MASKSET	0x2c
+#define BCSR_REG_SIGSTAT	0x30
+#define BCSR_REG_INTSTAT	0x34
+
+/* hexled control, offset from BCSR base 2 */
+#define BCSR_REG_HEXLEDS	0x00
+#define BCSR_REG_HEXCLEAR	0x08
+
+/*
+ * Register Bits and Pieces.
+ */
+#define BCSR_WHOAMI_DCID(x)		((x) & 0xf)
+#define BCSR_WHOAMI_CPLD(x)		(((x) >> 4) & 0xf)
+#define BCSR_WHOAMI_BOARD(x)		(((x) >> 8) & 0xf)
+
+/* register "WHOAMI" bits 11:8 identify the board */
+enum bcsr_whoami_boards {
+	BCSR_WHOAMI_PB1500 = 1,
+	BCSR_WHOAMI_PB1500R2,
+	BCSR_WHOAMI_PB1100,
+	BCSR_WHOAMI_DB1000,
+	BCSR_WHOAMI_DB1100,
+	BCSR_WHOAMI_DB1500,
+	BCSR_WHOAMI_DB1550,
+	BCSR_WHOAMI_PB1550_DDR,
+	BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
+	BCSR_WHOAMI_PB1550_SDR,
+	BCSR_WHOAMI_PB1200_DDR1,
+	BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
+	BCSR_WHOAMI_PB1200_DDR2,
+	BCSR_WHOAMI_DB1200,
+};
+
+/* STATUS reg.  Unless otherwise noted, they're valid on all boards.
+ * PB1200 = DB1200.
+ */
+#define BCSR_STATUS_PC0VS		0x0003
+#define BCSR_STATUS_PC1VS		0x000C
+#define BCSR_STATUS_PC0FI		0x0010
+#define BCSR_STATUS_PC1FI		0x0020
+#define BCSR_STATUS_PB1550_SWAPBOOT	0x0040
+#define BCSR_STATUS_SRAMWIDTH		0x0080
+#define BCSR_STATUS_FLASHBUSY		0x0100
+#define BCSR_STATUS_ROMBUSY		0x0400
+#define BCSR_STATUS_SD0WP		0x0400	/* DB1200 */
+#define BCSR_STATUS_SD1WP		0x0800
+#define BCSR_STATUS_USBOTGID		0x0800	/* PB/DB1550 */
+#define BCSR_STATUS_DB1000_SWAPBOOT	0x2000
+#define BCSR_STATUS_DB1200_SWAPBOOT	0x0040	/* DB1200 */
+#define BCSR_STATUS_IDECBLID		0x0200	/* DB1200 */
+#define BCSR_STATUS_DB1200_U0RXD	0x1000	/* DB1200 */
+#define BCSR_STATUS_DB1200_U1RXD	0x2000	/* DB1200 */
+#define BCSR_STATUS_FLASHDEN		0xC000
+#define BCSR_STATUS_DB1550_U0RXD	0x1000	/* DB1550 */
+#define BCSR_STATUS_DB1550_U3RXD	0x2000	/* DB1550 */
+#define BCSR_STATUS_PB1550_U0RXD	0x1000	/* PB1550 */
+#define BCSR_STATUS_PB1550_U1RXD	0x2000	/* PB1550 */
+#define BCSR_STATUS_PB1550_U3RXD	0x8000	/* PB1550 */
+
+
+/* DB/PB1000,1100,1500,1550 */
+#define BCSR_RESETS_PHY0		0x0001
+#define BCSR_RESETS_PHY1		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_FIR_SEL		0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
+#define BCSR_RESETS_PB1550_WSCFSM	0x2000
+#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
+#define BCSR_RESETS_DMAREQ		0x8000	/* PB1550 */
+
+#define BCSR_BOARD_PCIM66EN		0x0001
+#define BCSR_BOARD_SD0PWR		0x0040
+#define BCSR_BOARD_SD1PWR		0x0080
+#define BCSR_BOARD_PCIM33		0x0100
+#define BCSR_BOARD_PCIEXTARB		0x0200
+#define BCSR_BOARD_GPIO200RST		0x0400
+#define BCSR_BOARD_PCICLKOUT		0x0800
+#define BCSR_BOARD_PCICFG		0x1000
+#define BCSR_BOARD_SPISEL		0x4000	/* PB/DB1550 */
+#define BCSR_BOARD_SD0WP		0x4000	/* DB1100 */
+#define BCSR_BOARD_SD1WP		0x8000	/* DB1100 */
+
+
+/* DB/PB1200 */
+#define BCSR_RESETS_ETH			0x0001
+#define BCSR_RESETS_CAMERA		0x0002
+#define BCSR_RESETS_DC			0x0004
+#define BCSR_RESETS_IDE			0x0008
+#define BCSR_RESETS_TV			0x0010	/* DB1200 */
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX		0x0800	/* DB1200 */
+#define BCSR_RESETS_PB1200_WSCFSM	0x0800	/* PB1200 */
+#define BCSR_RESETS_PSC0MUX		0x1000
+#define BCSR_RESETS_PSC1MUX		0x2000
+#define BCSR_RESETS_SPISEL		0x4000
+#define BCSR_RESETS_SD1MUX		0x8000	/* PB1200 */
+
+#define BCSR_BOARD_LCDVEE		0x0001
+#define BCSR_BOARD_LCDVDD		0x0002
+#define BCSR_BOARD_LCDBL		0x0004
+#define BCSR_BOARD_CAMSNAP		0x0010
+#define BCSR_BOARD_CAMPWR		0x0020
+#define BCSR_BOARD_SD0PWR		0x0040
+
+
+#define BCSR_SWITCHES_DIP		0x00FF
+#define BCSR_SWITCHES_DIP_1		0x0080
+#define BCSR_SWITCHES_DIP_2		0x0040
+#define BCSR_SWITCHES_DIP_3		0x0020
+#define BCSR_SWITCHES_DIP_4		0x0010
+#define BCSR_SWITCHES_DIP_5		0x0008
+#define BCSR_SWITCHES_DIP_6		0x0004
+#define BCSR_SWITCHES_DIP_7		0x0002
+#define BCSR_SWITCHES_DIP_8		0x0001
+#define BCSR_SWITCHES_ROTARY		0x0F00
+
+
+#define BCSR_PCMCIA_PC0VPP		0x0003
+#define BCSR_PCMCIA_PC0VCC		0x000C
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+#define BCSR_PCMCIA_PC1VPP		0x0300
+#define BCSR_PCMCIA_PC1VCC		0x0C00
+#define BCSR_PCMCIA_PC1DRVEN		0x1000
+#define BCSR_PCMCIA_PC1RST		0x8000
+
+
+#define BCSR_LEDS_DECIMALS		0x0003
+#define BCSR_LEDS_LED0			0x0100
+#define BCSR_LEDS_LED1			0x0200
+#define BCSR_LEDS_LED2			0x0400
+#define BCSR_LEDS_LED3			0x0800
+
+
+#define BCSR_SYSTEM_RESET		0x8000	/* clear to reset */
+#define BCSR_SYSTEM_PWROFF		0x4000	/* set to power off */
+#define BCSR_SYSTEM_VDDI		0x001F	/* PB1xxx boards */
+
+
+
+
+/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
+ * BCSR spaces.
+ */
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
+
+/* read a board register */
+unsigned short bcsr_read(enum bcsr_id reg);
+
+/* write to a board register */
+void bcsr_write(enum bcsr_id reg, unsigned short val);
+
+/* modify a register. clear bits set in 'clr', set bits set in 'set' */
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
+
+/* install CPLD IRQ demuxer (DB1200/PB1200) */
+void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
+
+#endif
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 27f2610..3404248 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -25,133 +25,9 @@
 #define __ASM_DB1200_H
 
 #include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
-#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
-
-/*
- * SPI and SMB are muxed on the DBAu1200 board.
- * Refer to board documentation.
- */
-#define SPI_PSC_BASE		PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
-/*
- * AC'97 and I2S are muxed on the DBAu1200 board.
- * Refer to board documentation.
- */
-#define AC97_PSC_BASE		PSC1_BASE_ADDR
-#define I2S_PSC_BASE		PSC1_BASE_ADDR
-
-#define BCSR_KSEG1_ADDR 	0xB9800000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 board;
-		u16 reserved5;
-	/*18*/	u16 disk_leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-	/*20*/	u16 intclr;
-		u16 reserved8;
-	/*24*/	u16 intset;
-		u16 reserved9;
-	/*28*/	u16 intclr_mask;
-		u16 reserved10;
-	/*2C*/	u16 intset_mask;
-		u16 reserved11;
-
-	/*30*/	u16 sig_status;
-		u16 reserved12;
-	/*34*/	u16 int_status;
-		u16 reserved13;
-	/*38*/	u16 reserved14;
-		u16 reserved15;
-	/*3C*/	u16 reserved16;
-		u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_IDECBLID	0x0200
-#define BCSR_STATUS_SD0WP	0x0400
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_ETH		0x0001
-#define BCSR_RESETS_CAMERA	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_IDE		0x0008
-#define BCSR_RESETS_TV		0x0010
-/* Not resets but in the same register */
-#define BCSR_RESETS_PWMR1MUX	0x0800
-#define BCSR_RESETS_PCS0MUX	0x1000
-#define BCSR_RESETS_PCS1MUX	0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_BOARD_LCDVEE	0x0001
-#define BCSR_BOARD_LCDVDD	0x0002
-#define BCSR_BOARD_LCDBL	0x0004
-#define BCSR_BOARD_CAMSNAP	0x0010
-#define BCSR_BOARD_CAMPWR	0x0020
-#define BCSR_BOARD_SD0PWR	0x0040
-
-#define BCSR_LEDS_DECIMALS	0x0003
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
-
-#define BCSR_SYSTEM_POWEROFF	0x4000
-#define BCSR_SYSTEM_RESET	0x8000
-
 /* Bit positions for the different interrupt sources */
 #define BCSR_INT_IDE		0x0001
 #define BCSR_INT_ETH		0x0002
@@ -168,17 +44,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #define BCSR_INT_SD0INSERT	0x1000
 #define BCSR_INT_SD0EJECT	0x2000
 
-#define SMC91C111_PHYS_ADDR	0x19000300
-#define SMC91C111_INT		DB1200_ETH_INT
-
 #define IDE_PHYS_ADDR		0x18800000
 #define IDE_REG_SHIFT		5
-#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
-#define IDE_INT 		DB1200_IDE_INT
 #define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
 #define IDE_RQSIZE		128
 
-#define NAND_PHYS_ADDR		0x20000000
+#define DB1200_IDE_PHYS_ADDR	IDE_PHYS_ADDR
+#define DB1200_IDE_PHYS_LEN	(16 << IDE_REG_SHIFT)
+#define DB1200_ETH_PHYS_ADDR	0x19000300
+#define DB1200_NAND_PHYS_ADDR	0x20000000
 
 /*
  * External Interrupts for DBAu1200 as of 8/6/2004.
@@ -188,7 +62,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
  *   Example: IDE bis pos is  = 64 - 64
  *            ETH bit pos is  = 65 - 64
  */
-enum external_pb1200_ints {
+enum external_db1200_ints {
 	DB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
 
 	DB1200_IDE_INT		= DB1200_INT_BEGIN,
@@ -209,22 +83,4 @@ enum external_pb1200_ints {
 	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
 };
 
-
-/*
- * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT	DB1200_PC0_INT
-#define BOARD_PC1_INT	DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
-/* NAND chip select */
-#define NAND_CS 1
-
 #endif /* __ASM_DB1200_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index 1a515b8..a919dac 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -41,111 +41,11 @@
 #define SMBUS_PSC_BASE		PSC2_BASE_ADDR
 #define I2S_PSC_BASE		PSC3_BASE_ADDR
 
-#define BCSR_KSEG1_ADDR 	0xAF000000
 #define NAND_PHYS_ADDR		0x20000000
 
-#else
-#define BCSR_KSEG1_ADDR 0xAE000000
 #endif
 
 /*
- * Overlay data structure of the DBAu1x00 board registers.
- * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
- */
-typedef volatile struct
-{
-	/*00*/	unsigned short whoami;
-	unsigned short reserved0;
-	/*04*/	unsigned short status;
-	unsigned short reserved1;
-	/*08*/	unsigned short switches;
-	unsigned short reserved2;
-	/*0C*/	unsigned short resets;
-	unsigned short reserved3;
-	/*10*/	unsigned short pcmcia;
-	unsigned short reserved4;
-	/*14*/	unsigned short specific;
-	unsigned short reserved5;
-	/*18*/	unsigned short leds;
-	unsigned short reserved6;
-	/*1C*/	unsigned short swreset;
-	unsigned short reserved7;
-
-} BCSR;
-
-
-/*
- * Register/mask bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID		0x000F
-#define BCSR_WHOAMI_CPLD		0x00F0
-#define BCSR_WHOAMI_BOARD		0x0F00
-
-#define BCSR_STATUS_PC0VS		0x0003
-#define BCSR_STATUS_PC1VS		0x000C
-#define BCSR_STATUS_PC0FI		0x0010
-#define BCSR_STATUS_PC1FI		0x0020
-#define BCSR_STATUS_FLASHBUSY		0x0100
-#define BCSR_STATUS_ROMBUSY		0x0400
-#define BCSR_STATUS_SWAPBOOT		0x2000
-#define BCSR_STATUS_FLASHDEN		0xC000
-
-#define BCSR_SWITCHES_DIP		0x00FF
-#define BCSR_SWITCHES_DIP_1		0x0080
-#define BCSR_SWITCHES_DIP_2		0x0040
-#define BCSR_SWITCHES_DIP_3		0x0020
-#define BCSR_SWITCHES_DIP_4		0x0010
-#define BCSR_SWITCHES_DIP_5		0x0008
-#define BCSR_SWITCHES_DIP_6		0x0004
-#define BCSR_SWITCHES_DIP_7		0x0002
-#define BCSR_SWITCHES_DIP_8		0x0001
-#define BCSR_SWITCHES_ROTARY		0x0F00
-
-#define BCSR_RESETS_PHY0		0x0001
-#define BCSR_RESETS_PHY1		0x0002
-#define BCSR_RESETS_DC			0x0004
-#define BCSR_RESETS_FIR_SEL		0x2000
-#define BCSR_RESETS_IRDA_MODE_MASK	0xC000
-#define BCSR_RESETS_IRDA_MODE_FULL	0x0000
-#define BCSR_RESETS_IRDA_MODE_OFF	0x4000
-#define BCSR_RESETS_IRDA_MODE_2_3	0x8000
-#define BCSR_RESETS_IRDA_MODE_1_3	0xC000
-
-#define BCSR_PCMCIA_PC0VPP		0x0003
-#define BCSR_PCMCIA_PC0VCC		0x000C
-#define BCSR_PCMCIA_PC0DRVEN		0x0010
-#define BCSR_PCMCIA_PC0RST		0x0080
-#define BCSR_PCMCIA_PC1VPP		0x0300
-#define BCSR_PCMCIA_PC1VCC		0x0C00
-#define BCSR_PCMCIA_PC1DRVEN		0x1000
-#define BCSR_PCMCIA_PC1RST		0x8000
-
-#define BCSR_BOARD_PCIM66EN		0x0001
-#define BCSR_BOARD_SD0_PWR		0x0040
-#define BCSR_BOARD_SD1_PWR		0x0080
-#define BCSR_BOARD_PCIM33		0x0100
-#define BCSR_BOARD_GPIO200RST		0x0400
-#define BCSR_BOARD_PCICFG		0x1000
-#define BCSR_BOARD_SD0_WP		0x4000
-#define BCSR_BOARD_SD1_WP		0x8000
-
-#define BCSR_LEDS_DECIMALS		0x0003
-#define BCSR_LEDS_LED0			0x0100
-#define BCSR_LEDS_LED1			0x0200
-#define BCSR_LEDS_LED2			0x0400
-#define BCSR_LEDS_LED3			0x0800
-
-#define BCSR_SWRESET_RESET		0x0080
-
-/* PCMCIA DBAu1x00 specific defines */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-/*
  * NAND defines
  *
  * Timing values as described in databook, * ns value stripped of the
diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
index 9947e57..675bd86 100644
--- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
  * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
  * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
  *
@@ -52,6 +52,8 @@
 #define cpu_has_tx39_cache	0
 #define cpu_has_userlocal	0
 #define cpu_has_vce		0
+#define cpu_has_veic		0
+#define cpu_has_vint		0
 #define cpu_has_vtag_icache	0
 #define cpu_has_watch		1
 
diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
index 6305bea..21c4ece 100644
--- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
+++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h
@@ -2,7 +2,7 @@
  * the read/write interfaces for Virtual Support Module(VSM)
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
 #ifndef	_CS5536_VSM_H
diff --git a/arch/mips/include/asm/mach-loongson/gpio.h b/arch/mips/include/asm/mach-loongson/gpio.h
new file mode 100644
index 0000000..e30e73d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * STLS2F GPIO Support
+ *
+ * Copyright (c) 2008  Richard Liu, STMicroelectronics <richard.liu@st.com>
+ * Copyright (c) 2008-2010  Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__STLS2F_GPIO_H
+#define	__STLS2F_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+extern void gpio_set_value(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern int gpio_cansleep(unsigned gpio);
+
+/* The chip can do interrupt
+ * but it has not been tested and doc not clear
+ */
+static inline int gpio_to_irq(int gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+	return -EINVAL;
+}
+
+#endif				/* __STLS2F_GPIO_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index ee8bc83..fcdbe3a 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -1,12 +1,11 @@
 /*
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
  */
 
 #ifndef __ASM_MACH_LOONGSON_LOONGSON_H
@@ -23,7 +22,7 @@ extern void mach_prepare_reboot(void);
 extern void mach_prepare_shutdown(void);
 
 /* environment arguments from bootloader */
-extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long cpu_clock_freq;
 extern unsigned long memsize, highmemsize;
 
 /* loongson-specific command line, env and memory initialization */
@@ -308,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base;
  */
 #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
 	s##_WIN##w##_BASE = (src); \
-	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
 	s##_WIN##w##_MASK = ~(size-1); \
 } while (0)
 
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index acf8359..4321338 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
index e9960f3..3b23ee8 100644
--- a/arch/mips/include/asm/mach-loongson/mem.h
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index a199a4f..bc99dab 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -1,23 +1,12 @@
 /*
  * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
- * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General
  * Public License as published by the Free Software
  * Foundation; either version 2 of the License, or (at your
  * option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
- * 02139, USA.
  */
 
 #ifndef __ASM_MACH_LOONGSON_PCI_H_
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
deleted file mode 100644
index b1a60f1..0000000
--- a/arch/mips/include/asm/mach-pb1x00/pb1100.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Alchemy Semi Pb1100 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1100_H
-#define __ASM_PB1100_H
-
-#define PB1100_IDENT		0xAE000000
-#define BOARD_STATUS_REG	0xAE000004
-#  define PB1100_ROM_SEL	(1 << 15)
-#  define PB1100_ROM_SIZ	(1 << 14)
-#  define PB1100_SWAP_BOOT	(1 << 13)
-#  define PB1100_FLASH_WP	(1 << 12)
-#  define PB1100_ROM_H_STS	(1 << 11)
-#  define PB1100_ROM_L_STS	(1 << 10)
-#  define PB1100_FLASH_H_STS	(1 << 9)
-#  define PB1100_FLASH_L_STS	(1 << 8)
-#  define PB1100_SRAM_SIZ	(1 << 7)
-#  define PB1100_TSC_BUSY	(1 << 6)
-#  define PB1100_PCMCIA_VS_MASK (3 << 4)
-#  define PB1100_RS232_CD	(1 << 3)
-#  define PB1100_RS232_CTS	(1 << 2)
-#  define PB1100_RS232_DSR	(1 << 1)
-#  define PB1100_RS232_RI	(1 << 0)
-
-#define PB1100_IRDA_RS232	0xAE00000C
-#  define PB1100_IRDA_FULL	(0 << 14)	/* full power		*/
-#  define PB1100_IRDA_SHUTDOWN	(1 << 14)
-#  define PB1100_IRDA_TT	(2 << 14)	/* 2/3 power		*/
-#  define PB1100_IRDA_OT	(3 << 14)	/* 1/3 power		*/
-#  define PB1100_IRDA_FIR	(1 << 13)
-
-#define PCMCIA_BOARD_REG	0xAE000010
-#  define PB1100_SD_WP1_RO	(1 << 15)	/* read only		*/
-#  define PB1100_SD_WP0_RO	(1 << 14)	/* read only		*/
-#  define PB1100_SD_PWR1	(1 << 11)	/* applies power to SD1 */
-#  define PB1100_SD_PWR0	(1 << 10)	/* applies power to SD0 */
-#  define PB1100_SEL_SD_CONN1	(1 << 9)
-#  define PB1100_SEL_SD_CONN0	(1 << 8)
-#  define PC_DEASSERT_RST	(1 << 7)
-#  define PC_DRV_EN		(1 << 4)
-
-#define PB1100_G_CONTROL	0xAE000014	/* graphics control	*/
-
-#define PB1100_RST_VDDI 	0xAE00001C
-#  define PB1100_SOFT_RESET	(1 << 15)	/* clear to reset the board */
-#  define PB1100_VDDI_MASK	0x1F
-
-#define PB1100_LEDS		0xAE000018
-
-/*
- * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0  is the LED Display's decimal points.
- */
-#define PB1100_HEX_LED		0xAE000018
-
-/* PCMCIA Pb1100 specific defines */
-#define PCMCIA_MAX_SOCK  0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1100_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index c8618df..962eb55 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -25,6 +25,7 @@
 #define __ASM_PB1200_H
 
 #include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
 #define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
@@ -43,113 +44,8 @@
  * Refer to board documentation.
  */
 #define AC97_PSC_BASE       PSC1_BASE_ADDR
-#define I2S_PSC_BASE		PSC1_BASE_ADDR
+#define I2S_PSC_BASE	PSC1_BASE_ADDR
 
-#define BCSR_KSEG1_ADDR 0xAD800000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 board;
-		u16 reserved5;
-	/*18*/	u16 disk_leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-	/*20*/	u16 intclr;
-		u16 reserved8;
-	/*24*/	u16 intset;
-		u16 reserved9;
-	/*28*/	u16 intclr_mask;
-		u16 reserved10;
-	/*2C*/	u16 intset_mask;
-		u16 reserved11;
-
-	/*30*/	u16 sig_status;
-		u16 reserved12;
-	/*34*/	u16 int_status;
-		u16 reserved13;
-	/*38*/	u16 reserved14;
-		u16 reserved15;
-	/*3C*/	u16 reserved16;
-		u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_IDECBLID	0x0200
-#define BCSR_STATUS_SD0WP	0x0400
-#define BCSR_STATUS_SD1WP	0x0800
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_ETH		0x0001
-#define BCSR_RESETS_CAMERA	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_IDE		0x0008
-/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM	0x0800
-#define BCSR_RESETS_PCS0MUX	0x1000
-#define BCSR_RESETS_PCS1MUX	0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-#define BCSR_RESETS_SD1MUX	0x8000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_BOARD_LCDVEE	0x0001
-#define BCSR_BOARD_LCDVDD	0x0002
-#define BCSR_BOARD_LCDBL	0x0004
-#define BCSR_BOARD_CAMSNAP	0x0010
-#define BCSR_BOARD_CAMPWR	0x0020
-#define BCSR_BOARD_SD0PWR	0x0040
-#define BCSR_BOARD_SD1PWR	0x0080
-
-#define BCSR_LEDS_DECIMALS	0x00FF
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
 
 #define BCSR_SYSTEM_VDDI	0x001F
 #define BCSR_SYSTEM_POWEROFF	0x4000
@@ -239,20 +135,6 @@ enum external_pb1200_ints {
 	PB1200_INT_END		= PB1200_INT_BEGIN + 15
 };
 
-/*
- * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT	PB1200_PC0_INT
-#define BOARD_PC1_INT	PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
 /* NAND chip select */
 #define NAND_CS 1
 
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
deleted file mode 100644
index da51a2e..0000000
--- a/arch/mips/include/asm/mach-pb1x00/pb1500.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Alchemy Semi Pb1500 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1500_H
-#define __ASM_PB1500_H
-
-#define IDENT_BOARD_REG 	0xAE000000
-#define BOARD_STATUS_REG	0xAE000004
-#define PCI_BOARD_REG		0xAE000010
-#define PCMCIA_BOARD_REG	0xAE000010
-#  define PC_DEASSERT_RST	      0x80
-#  define PC_DRV_EN		      0x10
-#define PB1500_G_CONTROL	0xAE000014
-#define PB1500_RST_VDDI 	0xAE00001C
-#define PB1500_LEDS		0xAE000018
-
-#define PB1500_HEX_LED		0xAF000004
-#define PB1500_HEX_LED_BLANK	0xAF000008
-
-/* PCMCIA Pb1500 specific defines */
-#define PCMCIA_MAX_SOCK  0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1500_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index 6704a11..5879641 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -40,102 +40,6 @@
 #define SMBUS_PSC_BASE		PSC2_BASE_ADDR
 #define I2S_PSC_BASE		PSC3_BASE_ADDR
 
-#define BCSR_PHYS_ADDR 0xAF000000
-
-typedef volatile struct
-{
-	/*00*/	u16 whoami;
-		u16 reserved0;
-	/*04*/	u16 status;
-		u16 reserved1;
-	/*08*/	u16 switches;
-		u16 reserved2;
-	/*0C*/	u16 resets;
-		u16 reserved3;
-	/*10*/	u16 pcmcia;
-		u16 reserved4;
-	/*14*/	u16 pci;
-		u16 reserved5;
-	/*18*/	u16 leds;
-		u16 reserved6;
-	/*1C*/	u16 system;
-		u16 reserved7;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID	0x000F
-#define BCSR_WHOAMI_CPLD	0x00F0
-#define BCSR_WHOAMI_BOARD	0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS	0x0003
-#define BCSR_STATUS_PCMCIA1VS	0x000C
-#define BCSR_STATUS_PCMCIA0FI	0x0010
-#define BCSR_STATUS_PCMCIA1FI	0x0020
-#define BCSR_STATUS_SWAPBOOT	0x0040
-#define BCSR_STATUS_SRAMWIDTH	0x0080
-#define BCSR_STATUS_FLASHBUSY	0x0100
-#define BCSR_STATUS_ROMBUSY	0x0200
-#define BCSR_STATUS_USBOTGID	0x0800
-#define BCSR_STATUS_U0RXD	0x1000
-#define BCSR_STATUS_U1RXD	0x2000
-#define BCSR_STATUS_U3RXD	0x8000
-
-#define BCSR_SWITCHES_OCTAL	0x00FF
-#define BCSR_SWITCHES_DIP_1	0x0080
-#define BCSR_SWITCHES_DIP_2	0x0040
-#define BCSR_SWITCHES_DIP_3	0x0020
-#define BCSR_SWITCHES_DIP_4	0x0010
-#define BCSR_SWITCHES_DIP_5	0x0008
-#define BCSR_SWITCHES_DIP_6	0x0004
-#define BCSR_SWITCHES_DIP_7	0x0002
-#define BCSR_SWITCHES_DIP_8	0x0001
-#define BCSR_SWITCHES_ROTARY	0x0F00
-
-#define BCSR_RESETS_PHY0	0x0001
-#define BCSR_RESETS_PHY1	0x0002
-#define BCSR_RESETS_DC		0x0004
-#define BCSR_RESETS_WSC		0x2000
-#define BCSR_RESETS_SPISEL	0x4000
-#define BCSR_RESETS_DMAREQ	0x8000
-
-#define BCSR_PCMCIA_PC0VPP	0x0003
-#define BCSR_PCMCIA_PC0VCC	0x000C
-#define BCSR_PCMCIA_PC0DRVEN	0x0010
-#define BCSR_PCMCIA_PC0RST	0x0080
-#define BCSR_PCMCIA_PC1VPP	0x0300
-#define BCSR_PCMCIA_PC1VCC	0x0C00
-#define BCSR_PCMCIA_PC1DRVEN	0x1000
-#define BCSR_PCMCIA_PC1RST	0x8000
-
-#define BCSR_PCI_M66EN		0x0001
-#define BCSR_PCI_M33		0x0100
-#define BCSR_PCI_EXTERNARB	0x0200
-#define BCSR_PCI_GPIO200RST	0x0400
-#define BCSR_PCI_CLKOUT		0x0800
-#define BCSR_PCI_CFGHOST	0x1000
-
-#define BCSR_LEDS_DECIMALS	0x00FF
-#define BCSR_LEDS_LED0		0x0100
-#define BCSR_LEDS_LED1		0x0200
-#define BCSR_LEDS_LED2		0x0400
-#define BCSR_LEDS_LED3		0x0800
-
-#define BCSR_SYSTEM_VDDI	0x001F
-#define BCSR_SYSTEM_POWEROFF	0x4000
-#define BCSR_SYSTEM_RESET	0x8000
-
-#define PCMCIA_MAX_SOCK  1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
-	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
 #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
 #define PB1550_BOTH_BANKS
 #elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
index 657f089..6d70264 100644
--- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
+++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h
@@ -123,4 +123,3 @@
 #define PNX833X_GPIO_15_INT			(PNX833X_GPIO_IRQ_BASE + 15)
 
 #endif
-
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
index 629a574..4fd652c 100644
--- a/arch/mips/include/asm/mach-powertv/interrupts.h
+++ b/arch/mips/include/asm/mach-powertv/interrupts.h
@@ -251,4 +251,3 @@
 						 * channel 3. */
 #define irq_mpeg_d		(ibase+0) 	/* MPEG Decoder Interrupt */
 #endif	/* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
-
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
index 7950ef4..743385d 100644
--- a/arch/mips/include/asm/mach-sibyte/war.h
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -16,7 +16,11 @@
 #if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
     defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
 
-#define BCM1250_M3_WAR	1
+#ifndef __ASSEMBLY__
+extern int sb1250_m3_workaround_needed(void);
+#endif
+
+#define BCM1250_M3_WAR	sb1250_m3_workaround_needed()
 #define SIBYTE_1956_WAR	1
 
 #else
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index f4ab313..c6e3c93 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -135,6 +135,12 @@
 #define FPU_CSR_COND7   0x80000000      /* $fcc7 */
 
 /*
+ * Bits 18 - 20 of the FPU Status Register will be read as 0,
+ * and should be written as zero.
+ */
+#define FPU_CSR_RSVD	0x001c0000
+
+/*
  * X the exception cause indicator
  * E the exception enable
  * S the sticky/flag bit
@@ -161,7 +167,8 @@
 #define FPU_CSR_UDF_S   0x00000008
 #define FPU_CSR_INE_S   0x00000004
 
-/* rounding mode */
+/* Bits 0 and 1 of FPU Status Register specify the rounding mode */
+#define FPU_CSR_RM	0x00000003
 #define FPU_CSR_RN      0x0     /* nearest */
 #define FPU_CSR_RZ      0x1     /* towards zero */
 #define FPU_CSR_RU      0x2     /* towards +Infinity */
@@ -251,6 +258,14 @@
 #define PL_256M		28
 
 /*
+ * PageGrain bits
+ */
+#define PG_RIE		(_ULCAST_(1) <<  31)
+#define PG_XIE		(_ULCAST_(1) <<  30)
+#define PG_ELPA		(_ULCAST_(1) <<  29)
+#define PG_ESP		(_ULCAST_(1) <<  28)
+
+/*
  * R4x00 interrupt enable / cause bits
  */
 #define IE_SW0          (_ULCAST_(1) <<  8)
@@ -576,6 +591,10 @@
 #define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
 #define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
 
+#define MIPS_CONF4_MMUSIZEEXT	(_ULCAST_(255) << 0)
+#define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
+#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
+
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
 
 #define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
@@ -826,6 +845,9 @@ do {									\
 #define read_c0_pagemask()	__read_32bit_c0_register($5, 0)
 #define write_c0_pagemask(val)	__write_32bit_c0_register($5, 0, val)
 
+#define read_c0_pagegrain()	__read_32bit_c0_register($5, 1)
+#define write_c0_pagegrain(val)	__write_32bit_c0_register($5, 1, val)
+
 #define read_c0_wired()		__read_32bit_c0_register($6, 0)
 #define write_c0_wired(val)	__write_32bit_c0_register($6, 0, val)
 
diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h
index 4063edd..c436138 100644
--- a/arch/mips/include/asm/mmu.h
+++ b/arch/mips/include/asm/mmu.h
@@ -1,6 +1,9 @@
 #ifndef __ASM_MMU_H
 #define __ASM_MMU_H
 
-typedef unsigned long mm_context_t[NR_CPUS];
+typedef struct {
+	unsigned long asid[NR_CPUS];
+	void *vdso;
+} mm_context_t;
 
 #endif /* __ASM_MMU_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 145bb81..d959273 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -104,7 +104,7 @@ extern unsigned long smtc_asid_mask;
 
 #endif
 
-#define cpu_context(cpu, mm)	((mm)->context[cpu])
+#define cpu_context(cpu, mm)	((mm)->context.asid[cpu])
 #define cpu_asid(cpu, mm)	(cpu_context((cpu), (mm)) & ASID_MASK)
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 
diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h
index 7989b9f..d92406a 100644
--- a/arch/mips/include/asm/msc01_ic.h
+++ b/arch/mips/include/asm/msc01_ic.h
@@ -145,4 +145,3 @@ extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_i
 extern void ll_msc_irq(void);
 
 #endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
-
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
index c3ca959..af0e51a 100644
--- a/arch/mips/include/asm/nile4.h
+++ b/arch/mips/include/asm/nile4.h
@@ -307,4 +307,3 @@ extern u8 nile4_i8259_iack(void);
 extern void nile4_dump_irq_status(void);	/* Debug */
 
 #endif
-
diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h
index ef24a7b..cba6fbe 100644
--- a/arch/mips/include/asm/octeon/octeon-feature.h
+++ b/arch/mips/include/asm/octeon/octeon-feature.h
@@ -99,6 +99,8 @@ static inline int octeon_has_feature(enum octeon_feature feature)
 		return !cvmx_fuse_read(90);
 
 	case OCTEON_FEATURE_PCIE:
+	case OCTEON_FEATURE_MGMT_PORT:
+	case OCTEON_FEATURE_RAID:
 		return OCTEON_IS_MODEL(OCTEON_CN56XX)
 			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
 
@@ -110,12 +112,6 @@ static inline int octeon_has_feature(enum octeon_feature feature)
 	case OCTEON_FEATURE_TRA:
 		return !(OCTEON_IS_MODEL(OCTEON_CN30XX)
 			 || OCTEON_IS_MODEL(OCTEON_CN50XX));
-	case OCTEON_FEATURE_MGMT_PORT:
-		return OCTEON_IS_MODEL(OCTEON_CN56XX)
-			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
-	case OCTEON_FEATURE_RAID:
-		return OCTEON_IS_MODEL(OCTEON_CN56XX)
-			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
 	case OCTEON_FEATURE_USB:
 		return !(OCTEON_IS_MODEL(OCTEON_CN38XX)
 			 || OCTEON_IS_MODEL(OCTEON_CN58XX));
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index 4d0a8c6..ca6214b 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -213,6 +213,11 @@ struct octeon_cf_data {
 	int		dma_engine;	/* -1 for no DMA */
 };
 
+struct octeon_i2c_data {
+	unsigned int	sys_freq;
+	unsigned int	i2c_freq;
+};
+
 extern void octeon_write_lcd(const char *s);
 extern void octeon_check_cpu_bist(void);
 extern int octeon_get_boot_debug_flag(void);
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index f266295..a16beaf 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -107,18 +107,6 @@ typedef struct { unsigned long pte; } pte_t;
 typedef struct page *pgtable_t;
 
 /*
- * For 3-level pagetables we defines these ourselves, for 2-level the
- * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
- */
-#ifdef CONFIG_64BIT
-
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)	((x).pmd)
-#define __pmd(x)	((pmd_t) { (x) } )
-
-#endif
-
-/*
  * Right now we don't support 4-level pagetables, so all pud-related
  * definitions come from <asm-generic/pgtable-nopud.h>.
  */
@@ -200,8 +188,10 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
-#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE + 	\
+								PHYS_OFFSET)
+#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET -	\
+								PHYS_OFFSET)
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h
index 1d9bb8c..da3920f 100644
--- a/arch/mips/include/asm/param.h
+++ b/arch/mips/include/asm/param.h
@@ -9,23 +9,8 @@
 #ifndef _ASM_PARAM_H
 #define _ASM_PARAM_H
 
-#ifdef __KERNEL__
-
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
 #define EXEC_PAGESIZE	65536
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _ASM_PARAM_H */
diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h
index f526568..cf252af 100644
--- a/arch/mips/include/asm/parport.h
+++ b/arch/mips/include/asm/parport.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-#ifndef _ASM_PARPORT_H
-#define _ASM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* _ASM_PARPORT_H */
+#include <asm-generic/parport.h>
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 5ebf825..3beea14 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -102,28 +102,6 @@ struct pci_dev;
  */
 extern unsigned int PCI_DMA_BUS_IS_PHYS;
 
-#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
-
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE  */
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 3738f4b..881d18b 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -31,7 +31,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
  */
 extern void pmd_init(unsigned long page, unsigned long pagetable);
 
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
 
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
@@ -104,7 +104,7 @@ do {							\
 	tlb_remove_page((tlb), pte);			\
 } while (0)
 
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index 55813d6..ae90412 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -127,8 +127,8 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
 #else
-#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot)	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(x)		((unsigned long)((x).pte >> _PFN_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((unsigned long long)(pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif
 #endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
 
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 9cd5089..1be4b0f 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -16,7 +16,11 @@
 #include <asm/cachectl.h>
 #include <asm/fixmap.h>
 
+#ifdef CONFIG_PAGE_SIZE_64KB
+#include <asm-generic/pgtable-nopmd.h>
+#else
 #include <asm-generic/pgtable-nopud.h>
+#endif
 
 /*
  * Each address space has 2 4K pages as its page directory, giving 1024
@@ -37,13 +41,20 @@
  * fault address - VMALLOC_START.
  */
 
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#ifdef __PAGETABLE_PMD_FOLDED
+#define PGDIR_SHIFT	(PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3)
+#else
+
 /* PMD_SHIFT determines the size of the area a second-level page table can map */
 #define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
 #define PMD_SIZE	(1UL << PMD_SHIFT)
 #define PMD_MASK	(~(PMD_SIZE-1))
 
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
 #define PGDIR_SHIFT	(PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
+#endif
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
@@ -92,12 +103,14 @@
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud
-#define PMD_ORDER		0
+#define PMD_ORDER		aieeee_attempt_to_allocate_pmd
 #define PTE_ORDER		0
 #endif
 
 #define PTRS_PER_PGD	((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#ifndef __PAGETABLE_PMD_FOLDED
 #define PTRS_PER_PMD	((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#endif
 #define PTRS_PER_PTE	((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
 
 #if PGDIR_SIZE >= TASK_SIZE
@@ -107,10 +120,17 @@
 #endif
 #define FIRST_USER_ADDRESS	0UL
 
-#define VMALLOC_START		MAP_BASE
+/*
+ * TLB refill handlers also map the vmalloc area into xuseg.  Avoid
+ * the first couple of pages so NULL pointer dereferences will still
+ * reliably trap.
+ */
+#define VMALLOC_START		(MAP_BASE + (2 * PAGE_SIZE))
 #define VMALLOC_END	\
-	(VMALLOC_START + \
-	 PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32))
+	(MAP_BASE + \
+	 min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
+	     (1UL << cpu_vmbits)) - (1UL << 32))
+
 #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
 	VMALLOC_START != CKSSEG
 /* Load modules into 32bit-compatible segment. */
@@ -120,15 +140,30 @@
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#ifndef __PAGETABLE_PMD_FOLDED
 #define pmd_ERROR(e) \
 	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#endif
 #define pgd_ERROR(e) \
 	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
 
 extern pte_t invalid_pte_table[PTRS_PER_PTE];
 extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+
+
+#ifndef __PAGETABLE_PMD_FOLDED
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+
+
 extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
 extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
+#endif
 
 /*
  * Empty pgd/pmd entries point to the invalid_pte_table.
@@ -149,6 +184,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 {
 	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
 }
+#ifndef __PAGETABLE_PMD_FOLDED
 
 /*
  * Empty pud entries point to the invalid_pmd_table.
@@ -172,6 +208,7 @@ static inline void pud_clear(pud_t *pudp)
 {
 	pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
 }
+#endif
 
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 
@@ -179,8 +216,8 @@ static inline void pud_clear(pud_t *pudp)
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
 #else
-#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(x)		((unsigned long)((x).pte >> _PFN_SHIFT))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
 #endif
 
 #define __pgd_offset(address)	pgd_index(address)
@@ -196,6 +233,7 @@ static inline void pud_clear(pud_t *pudp)
 /* to find an entry in a page-table-directory */
 #define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
 
+#ifndef __PAGETABLE_PMD_FOLDED
 static inline unsigned long pud_page_vaddr(pud_t pud)
 {
 	return pud_val(pud);
@@ -208,6 +246,7 @@ static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
 {
 	return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address);
 }
+#endif
 
 /* Find an entry in the third-level page table.. */
 #define __pte_offset(address)						\
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 1073e6d..e9fe7e9 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -50,7 +50,7 @@
 #define _CACHE_SHIFT                3
 #define _CACHE_MASK                 (7<<3)
 
-#else
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
 #define _PAGE_PRESENT               (1<<0)  /* implemented in software */
 #define _PAGE_READ                  (1<<1)  /* implemented in software */
@@ -59,8 +59,6 @@
 #define _PAGE_MODIFIED              (1<<4)  /* implemented in software */
 #define _PAGE_FILE                  (1<<4)  /* set:pagecache unset:swap */
 
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-
 #define _PAGE_GLOBAL                (1<<8)
 #define _PAGE_VALID                 (1<<9)
 #define _PAGE_SILENT_READ           (1<<9)  /* synonym                 */
@@ -69,21 +67,113 @@
 #define _CACHE_UNCACHED             (1<<11)
 #define _CACHE_MASK                 (1<<11)
 
+#else /* 'Normal' r4K case */
+/*
+ * When using the RI/XI bit support, we have 13 bits of flags below
+ * the physical address. The RI/XI bits are placed such that a SRL 5
+ * can strip off the software bits, then a ROTR 2 can move the RI/XI
+ * into bits [63:62]. This also limits physical address to 56 bits,
+ * which is more than we need right now.
+ */
+
+/* implemented in software */
+#define _PAGE_PRESENT_SHIFT	(0)
+#define _PAGE_PRESENT		(1 << _PAGE_PRESENT_SHIFT)
+/* implemented in software, should be unused if kernel_uses_smartmips_rixi. */
+#define _PAGE_READ_SHIFT	(kernel_uses_smartmips_rixi ? _PAGE_PRESENT_SHIFT : _PAGE_PRESENT_SHIFT + 1)
+#define _PAGE_READ ({if (kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_READ_SHIFT; })
+/* implemented in software */
+#define _PAGE_WRITE_SHIFT	(_PAGE_READ_SHIFT + 1)
+#define _PAGE_WRITE		(1 << _PAGE_WRITE_SHIFT)
+/* implemented in software */
+#define _PAGE_ACCESSED_SHIFT	(_PAGE_WRITE_SHIFT + 1)
+#define _PAGE_ACCESSED		(1 << _PAGE_ACCESSED_SHIFT)
+/* implemented in software */
+#define _PAGE_MODIFIED_SHIFT	(_PAGE_ACCESSED_SHIFT + 1)
+#define _PAGE_MODIFIED		(1 << _PAGE_MODIFIED_SHIFT)
+/* set:pagecache unset:swap */
+#define _PAGE_FILE		(_PAGE_MODIFIED)
+
+#ifdef CONFIG_HUGETLB_PAGE
+/* huge tlb page */
+#define _PAGE_HUGE_SHIFT	(_PAGE_MODIFIED_SHIFT + 1)
+#define _PAGE_HUGE		(1 << _PAGE_HUGE_SHIFT)
 #else
+#define _PAGE_HUGE_SHIFT	(_PAGE_MODIFIED_SHIFT)
+#define _PAGE_HUGE		({BUG(); 1; })  /* Dummy value */
+#endif
 
-#define _PAGE_R4KBUG                (1<<5)  /* workaround for r4k bug  */
-#define _PAGE_HUGE                  (1<<5)  /* huge tlb page */
-#define _PAGE_GLOBAL                (1<<6)
-#define _PAGE_VALID                 (1<<7)
-#define _PAGE_SILENT_READ           (1<<7)  /* synonym                 */
-#define _PAGE_DIRTY                 (1<<8)  /* The MIPS dirty bit      */
-#define _PAGE_SILENT_WRITE          (1<<8)
-#define _CACHE_SHIFT		    9
-#define _CACHE_MASK                 (7<<9)
+/* Page cannot be executed */
+#define _PAGE_NO_EXEC_SHIFT	(kernel_uses_smartmips_rixi ? _PAGE_HUGE_SHIFT + 1 : _PAGE_HUGE_SHIFT)
+#define _PAGE_NO_EXEC		({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_EXEC_SHIFT; })
+
+/* Page cannot be read */
+#define _PAGE_NO_READ_SHIFT	(kernel_uses_smartmips_rixi ? _PAGE_NO_EXEC_SHIFT + 1 : _PAGE_NO_EXEC_SHIFT)
+#define _PAGE_NO_READ		({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_READ_SHIFT; })
+
+#define _PAGE_GLOBAL_SHIFT	(_PAGE_NO_READ_SHIFT + 1)
+#define _PAGE_GLOBAL		(1 << _PAGE_GLOBAL_SHIFT)
+
+#define _PAGE_VALID_SHIFT	(_PAGE_GLOBAL_SHIFT + 1)
+#define _PAGE_VALID		(1 << _PAGE_VALID_SHIFT)
+/* synonym                 */
+#define _PAGE_SILENT_READ	(_PAGE_VALID)
+
+/* The MIPS dirty bit      */
+#define _PAGE_DIRTY_SHIFT	(_PAGE_VALID_SHIFT + 1)
+#define _PAGE_DIRTY		(1 << _PAGE_DIRTY_SHIFT)
+#define _PAGE_SILENT_WRITE	(_PAGE_DIRTY)
+
+#define _CACHE_SHIFT		(_PAGE_DIRTY_SHIFT + 1)
+#define _CACHE_MASK		(7 << _CACHE_SHIFT)
+
+#define _PFN_SHIFT		(PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
 
-#endif
 #endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
 
+#ifndef _PFN_SHIFT
+#define _PFN_SHIFT                  PAGE_SHIFT
+#endif
+#define _PFN_MASK		(~((1 << (_PFN_SHIFT)) - 1))
+
+#ifndef _PAGE_NO_READ
+#define _PAGE_NO_READ ({BUG(); 0; })
+#define _PAGE_NO_READ_SHIFT ({BUG(); 0; })
+#endif
+#ifndef _PAGE_NO_EXEC
+#define _PAGE_NO_EXEC ({BUG(); 0; })
+#endif
+#ifndef _PAGE_GLOBAL_SHIFT
+#define _PAGE_GLOBAL_SHIFT ilog2(_PAGE_GLOBAL)
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ * pte_to_entrylo converts a page table entry (PTE) into a Mips
+ * entrylo0/1 value.
+ */
+static inline uint64_t pte_to_entrylo(unsigned long pte_val)
+{
+	if (kernel_uses_smartmips_rixi) {
+		int sa;
+#ifdef CONFIG_32BIT
+		sa = 31 - _PAGE_NO_READ_SHIFT;
+#else
+		sa = 63 - _PAGE_NO_READ_SHIFT;
+#endif
+		/*
+		 * C has no way to express that this is a DSRL
+		 * _PAGE_NO_EXEC_SHIFT followed by a ROTR 2.  Luckily
+		 * in the fast path this is done in assembly
+		 */
+		return (pte_val >> _PAGE_GLOBAL_SHIFT) |
+			((pte_val & (_PAGE_NO_EXEC | _PAGE_NO_READ)) << sa);
+	}
+
+	return pte_val >> _PAGE_GLOBAL_SHIFT;
+}
+#endif
 
 /*
  * Cache attributes
@@ -130,9 +220,9 @@
 
 #endif
 
-#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __READABLE	(_PAGE_SILENT_READ | _PAGE_ACCESSED | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ))
 #define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
 
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+#define _PAGE_CHG_MASK  (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
 
 #endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 1854336..7e40f37 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -22,23 +22,24 @@ struct mm_struct;
 struct vm_area_struct;
 
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
-#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_WRITE | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
 				 _page_cachable_default)
-#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
-				 _page_cachable_default)
-#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
+				 (kernel_uses_smartmips_rixi ?  _PAGE_NO_EXEC : 0) | _page_cachable_default)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
 				 _page_cachable_default)
 #define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
 				 _PAGE_GLOBAL | _page_cachable_default)
-#define PAGE_USERIO	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+#define PAGE_USERIO	__pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | _PAGE_WRITE | \
 				 _page_cachable_default)
 #define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
 			__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
 
 /*
- * MIPS can't do page protection for execute, and considers that the same like
- * read. Also, write permissions imply read permissions. This is the closest
- * we can get by reasonable means..
+ * If _PAGE_NO_EXEC is not defined, we can't do page protection for
+ * execute, and consider it to be the same as read. Also, write
+ * permissions imply read permissions. This is the closest we can get
+ * by reasonable means..
  */
 
 /*
@@ -177,7 +178,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt
  */
 #define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
 
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
 /*
  * (puds are folded into pgds so this doesn't get actually called,
  * but the define is needed for a generic inline function.)
@@ -298,8 +299,13 @@ static inline pte_t pte_mkdirty(pte_t pte)
 static inline pte_t pte_mkyoung(pte_t pte)
 {
 	pte_val(pte) |= _PAGE_ACCESSED;
-	if (pte_val(pte) & _PAGE_READ)
-		pte_val(pte) |= _PAGE_SILENT_READ;
+	if (kernel_uses_smartmips_rixi) {
+		if (!(pte_val(pte) & _PAGE_NO_READ))
+			pte_val(pte) |= _PAGE_SILENT_READ;
+	} else {
+		if (pte_val(pte) & _PAGE_READ)
+			pte_val(pte) |= _PAGE_SILENT_READ;
+	}
 	return pte;
 }
 
@@ -362,8 +368,9 @@ extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	pte_t pte);
 
 static inline void update_mmu_cache(struct vm_area_struct *vma,
-	unsigned long address, pte_t pte)
+	unsigned long address, pte_t *ptep)
 {
+	pte_t pte = *ptep;
 	__update_tlb(vma, address, pte);
 	__update_cache(vma, address, pte);
 }
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
index 14ca7dc..54ef1a9 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -118,7 +118,6 @@
 #define ZSP_DUET		'D'	/* one DUET zsp engine */
 #define ZSP_TRIAD		'T'	/* two TRIAD zsp engines */
 
-extern char *prom_getcmdline(void);
 extern char *prom_getenv(char *name);
 extern void prom_init_cmdline(void);
 extern void prom_meminit(void);
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 087a888..5d33b72 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -33,13 +33,19 @@ extern void (*cpu_wait)(void);
 
 extern unsigned int vced_count, vcei_count;
 
+/*
+ * A special page (the vdso) is mapped into all processes at the very
+ * top of the virtual memory space.
+ */
+#define SPECIAL_PAGES_SIZE PAGE_SIZE
+
 #ifdef CONFIG_32BIT
 /*
  * User space process size: 2GB. This is hardcoded into a few places,
  * so don't change it unless you know what you are doing.
  */
 #define TASK_SIZE	0x7fff8000UL
-#define STACK_TOP	TASK_SIZE
+#define STACK_TOP	((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
 
 /*
  * This decides where the kernel will search for a free chunk of vm
@@ -59,7 +65,8 @@ extern unsigned int vced_count, vcei_count;
 #define TASK_SIZE32	0x7fff8000UL
 #define TASK_SIZE	0x10000000000UL
 #define STACK_TOP	\
-      (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+	(((test_thread_flag(TIF_32BIT_ADDR) ?				\
+	   TASK_SIZE32 : TASK_SIZE) & PAGE_MASK) - SPECIAL_PAGES_SIZE)
 
 /*
  * This decides where the kernel will search for a free chunk of vm
@@ -337,16 +344,10 @@ unsigned long get_wchan(struct task_struct *p);
 #ifdef CONFIG_CPU_HAS_PREFETCH
 
 #define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch((x), 0, 1)
 
-static inline void prefetch(const void *addr)
-{
-	__asm__ __volatile__(
-	"	.set	mips4		\n"
-	"	pref	%0, (%1)	\n"
-	"	.set	mips0		\n"
-	:
-	: "i" (Pref_Load), "r" (addr));
-}
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(x) __builtin_prefetch((x), 1, 1)
 
 #endif
 
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index ce47118..cdc6a46 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
 
 extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
 
-extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 
-static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
 {
 	if (unlikely(!user_mode(regs)))
 		die(str, regs);
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
index 83d69fe..9af65e7 100644
--- a/arch/mips/include/asm/scatterlist.h
+++ b/arch/mips/include/asm/scatterlist.h
@@ -1,27 +1,7 @@
 #ifndef __ASM_SCATTERLIST_H
 #define __ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x00ffffffUL)
 
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
index c07ebd8..a0cb0ca 100644
--- a/arch/mips/include/asm/serial.h
+++ b/arch/mips/include/asm/serial.h
@@ -1,22 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
index 63741ca..2a2f1bd 100644
--- a/arch/mips/include/asm/sgialib.h
+++ b/arch/mips/include/asm/sgialib.h
@@ -33,14 +33,6 @@ extern int prom_flags;
 extern void prom_putchar(char c);
 extern char prom_getchar(void);
 
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS    32
-struct prom_pmemblock {
-	LONG	base;		/* Within KSEG0 or XKPHYS. */
-	ULONG	size;		/* In bytes. */
-	ULONG	type;		/* free or prom memory */
-};
-
 /* Get next memory descriptor after CURR, returns first descriptor
  * in chain is CURR is NULL.
  */
@@ -51,7 +43,6 @@ extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
  * array.
  */
 extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
 
 /* PROM device tree library routines. */
 #define PROM_NULL_COMPONENT ((pcomponent *) 0)
@@ -62,20 +53,6 @@ extern pcomponent *ArcGetPeer(pcomponent *this);
 /* Get child component of THIS. */
 extern pcomponent *ArcGetChild(pcomponent *this);
 
-/* Get parent component of CHILD. */
-extern pcomponent *prom_getparent(pcomponent *child);
-
-/* Copy component opaque data of component THIS into BUFFER
- * if component THIS has opaque data.  Returns success or
- * failure status.
- */
-extern long prom_getcdata(void *buffer, pcomponent *this);
-
-/* Other misc. component routines. */
-extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
-extern long prom_delcomponent(pcomponent *this);
-extern pcomponent *prom_componentbypath(char *path);
-
 /* This is called at prom_init time to identify the
  * ARC architecture we are running on
  */
@@ -88,35 +65,13 @@ extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
 /* ARCS command line parsing. */
 extern void prom_init_cmdline(void);
 
-/* Acquiring info about the current time, etc. */
-extern struct linux_tinfo *prom_gettinfo(void);
-extern unsigned long prom_getrtime(void);
-
 /* File operations. */
-extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
-extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
-extern long prom_close(unsigned long fd);
 extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
-extern long prom_getrstatus(unsigned long fd);
 extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
-extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
-extern long prom_mount(char *name, enum linux_mountops op);
-extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
-extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
-
-/* Running stand-along programs. */
-extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
-extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
-extern long prom_exec(char *name, long argc, char **argv, char **envp);
 
 /* Misc. routines. */
-extern VOID prom_halt(VOID) __attribute__((noreturn));
-extern VOID prom_powerdown(VOID) __attribute__((noreturn));
-extern VOID prom_restart(VOID) __attribute__((noreturn));
 extern VOID ArcReboot(VOID) __attribute__((noreturn));
 extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
-extern long prom_cfgsave(VOID);
-extern struct linux_sysid *prom_getsysid(VOID);
 extern VOID ArcFlushAllCaches(VOID);
 extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
 
diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h
index ebefe79..2d1a26d 100644
--- a/arch/mips/include/asm/sibyte/bigsur.h
+++ b/arch/mips/include/asm/sibyte/bigsur.h
@@ -46,4 +46,3 @@
 #endif
 
 #endif /* __ASM_SIBYTE_BIGSUR_H */
-
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
index 081e8b1..1e76cf1 100644
--- a/arch/mips/include/asm/sibyte/sb1250_ldt.h
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -420,4 +420,3 @@
 #endif /* 1250 PASS2 || 112x PASS1 */
 
 #endif
-
diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h
index 5de4c5e..6af25ba 100644
--- a/arch/mips/include/asm/sn/klkernvars.h
+++ b/arch/mips/include/asm/sn/klkernvars.h
@@ -26,4 +26,3 @@ typedef struct kern_vars_s {
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_SN_KLKERNVARS_H */
-
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
index 795ac6c..7165333 100644
--- a/arch/mips/include/asm/sparsemem.h
+++ b/arch/mips/include/asm/sparsemem.h
@@ -11,4 +11,3 @@
 
 #endif /* CONFIG_SPARSEMEM */
 #endif /* _MIPS_SPARSEMEM_H */
-
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
index 21ef9ef..396e402 100644
--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -36,9 +36,9 @@
 
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
-	unsigned int counters = ACCESS_ONCE(lock->lock);
+	u32 counters = ACCESS_ONCE(lock->lock);
 
-	return ((counters >> 14) ^ counters) & 0x1fff;
+	return ((counters >> 16) ^ counters) & 0xffff;
 }
 
 #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
@@ -47,9 +47,9 @@ static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 
 static inline int arch_spin_is_contended(arch_spinlock_t *lock)
 {
-	unsigned int counters = ACCESS_ONCE(lock->lock);
+	u32 counters = ACCESS_ONCE(lock->lock);
 
-	return (((counters >> 14) - counters) & 0x1fff) > 1;
+	return (((counters >> 16) - counters) & 0xffff) > 1;
 }
 #define arch_spin_is_contended	arch_spin_is_contended
 
@@ -57,6 +57,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	int my_ticket;
 	int tmp;
+	int inc = 0x10000;
 
 	if (R10000_LLSC_WAR) {
 		__asm__ __volatile__ (
@@ -64,25 +65,24 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 		"	.set noreorder					\n"
 		"							\n"
 		"1:	ll	%[ticket], %[ticket_ptr]		\n"
-		"	addiu	%[my_ticket], %[ticket], 0x4000		\n"
+		"	addu	%[my_ticket], %[ticket], %[inc]		\n"
 		"	sc	%[my_ticket], %[ticket_ptr]		\n"
 		"	beqzl	%[my_ticket], 1b			\n"
 		"	 nop						\n"
-		"	srl	%[my_ticket], %[ticket], 14		\n"
-		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
-		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	srl	%[my_ticket], %[ticket], 16		\n"
+		"	andi	%[ticket], %[ticket], 0xffff		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0xffff	\n"
 		"	bne	%[ticket], %[my_ticket], 4f		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
 		"2:							\n"
 		"	.subsection 2					\n"
-		"4:	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"4:	andi	%[ticket], %[ticket], 0xffff		\n"
 		"	sll	%[ticket], 5				\n"
 		"							\n"
 		"6:	bnez	%[ticket], 6b				\n"
 		"	 subu	%[ticket], 1				\n"
 		"							\n"
-		"	lw	%[ticket], %[ticket_ptr]		\n"
-		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	lhu	%[ticket], %[serving_now_ptr]		\n"
 		"	beq	%[ticket], %[my_ticket], 2b		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
 		"	b	4b					\n"
@@ -90,36 +90,33 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 		"	.previous					\n"
 		"	.set pop					\n"
 		: [ticket_ptr] "+m" (lock->lock),
+		  [serving_now_ptr] "+m" (lock->h.serving_now),
 		  [ticket] "=&r" (tmp),
-		  [my_ticket] "=&r" (my_ticket));
+		  [my_ticket] "=&r" (my_ticket)
+		: [inc] "r" (inc));
 	} else {
 		__asm__ __volatile__ (
 		"	.set push		# arch_spin_lock	\n"
 		"	.set noreorder					\n"
 		"							\n"
-		"	ll	%[ticket], %[ticket_ptr]		\n"
-		"1:	addiu	%[my_ticket], %[ticket], 0x4000		\n"
+		"1:	ll	%[ticket], %[ticket_ptr]		\n"
+		"	addu	%[my_ticket], %[ticket], %[inc]		\n"
 		"	sc	%[my_ticket], %[ticket_ptr]		\n"
-		"	beqz	%[my_ticket], 3f			\n"
-		"	 nop						\n"
-		"	srl	%[my_ticket], %[ticket], 14		\n"
-		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
-		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	beqz	%[my_ticket], 1b			\n"
+		"	 srl	%[my_ticket], %[ticket], 16		\n"
+		"	andi	%[ticket], %[ticket], 0xffff		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0xffff	\n"
 		"	bne	%[ticket], %[my_ticket], 4f		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
 		"2:							\n"
 		"	.subsection 2					\n"
-		"3:	b	1b					\n"
-		"	 ll	%[ticket], %[ticket_ptr]		\n"
-		"							\n"
 		"4:	andi	%[ticket], %[ticket], 0x1fff		\n"
 		"	sll	%[ticket], 5				\n"
 		"							\n"
 		"6:	bnez	%[ticket], 6b				\n"
 		"	 subu	%[ticket], 1				\n"
 		"							\n"
-		"	lw	%[ticket], %[ticket_ptr]		\n"
-		"	andi	%[ticket], %[ticket], 0x1fff		\n"
+		"	lhu	%[ticket], %[serving_now_ptr]		\n"
 		"	beq	%[ticket], %[my_ticket], 2b		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
 		"	b	4b					\n"
@@ -127,8 +124,10 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 		"	.previous					\n"
 		"	.set pop					\n"
 		: [ticket_ptr] "+m" (lock->lock),
+		  [serving_now_ptr] "+m" (lock->h.serving_now),
 		  [ticket] "=&r" (tmp),
-		  [my_ticket] "=&r" (my_ticket));
+		  [my_ticket] "=&r" (my_ticket)
+		: [inc] "r" (inc));
 	}
 
 	smp_llsc_mb();
@@ -136,47 +135,16 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	int tmp;
-
-	smp_llsc_mb();
-
-	if (R10000_LLSC_WAR) {
-		__asm__ __volatile__ (
-		"				# arch_spin_unlock	\n"
-		"1:	ll	%[ticket], %[ticket_ptr]		\n"
-		"	addiu	%[ticket], %[ticket], 1			\n"
-		"	ori	%[ticket], %[ticket], 0x2000		\n"
-		"	xori	%[ticket], %[ticket], 0x2000		\n"
-		"	sc	%[ticket], %[ticket_ptr]		\n"
-		"	beqzl	%[ticket], 1b				\n"
-		: [ticket_ptr] "+m" (lock->lock),
-		  [ticket] "=&r" (tmp));
-	} else {
-		__asm__ __volatile__ (
-		"	.set push		# arch_spin_unlock	\n"
-		"	.set noreorder					\n"
-		"							\n"
-		"	ll	%[ticket], %[ticket_ptr]		\n"
-		"1:	addiu	%[ticket], %[ticket], 1			\n"
-		"	ori	%[ticket], %[ticket], 0x2000		\n"
-		"	xori	%[ticket], %[ticket], 0x2000		\n"
-		"	sc	%[ticket], %[ticket_ptr]		\n"
-		"	beqz	%[ticket], 2f				\n"
-		"	 nop						\n"
-		"							\n"
-		"	.subsection 2					\n"
-		"2:	b	1b					\n"
-		"	 ll	%[ticket], %[ticket_ptr]		\n"
-		"	.previous					\n"
-		"	.set pop					\n"
-		: [ticket_ptr] "+m" (lock->lock),
-		  [ticket] "=&r" (tmp));
-	}
+	unsigned int serving_now = lock->h.serving_now + 1;
+	wmb();
+	lock->h.serving_now = (u16)serving_now;
+	nudge_writes();
 }
 
 static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	int tmp, tmp2, tmp3;
+	int inc = 0x10000;
 
 	if (R10000_LLSC_WAR) {
 		__asm__ __volatile__ (
@@ -184,11 +152,11 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 		"	.set noreorder					\n"
 		"							\n"
 		"1:	ll	%[ticket], %[ticket_ptr]		\n"
-		"	srl	%[my_ticket], %[ticket], 14		\n"
-		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
-		"	andi	%[now_serving], %[ticket], 0x1fff	\n"
+		"	srl	%[my_ticket], %[ticket], 16		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0xffff	\n"
+		"	andi	%[now_serving], %[ticket], 0xffff	\n"
 		"	bne	%[my_ticket], %[now_serving], 3f	\n"
-		"	 addiu	%[ticket], %[ticket], 0x4000		\n"
+		"	 addu	%[ticket], %[ticket], %[inc]		\n"
 		"	sc	%[ticket], %[ticket_ptr]		\n"
 		"	beqzl	%[ticket], 1b				\n"
 		"	 li	%[ticket], 1				\n"
@@ -201,33 +169,33 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 		: [ticket_ptr] "+m" (lock->lock),
 		  [ticket] "=&r" (tmp),
 		  [my_ticket] "=&r" (tmp2),
-		  [now_serving] "=&r" (tmp3));
+		  [now_serving] "=&r" (tmp3)
+		: [inc] "r" (inc));
 	} else {
 		__asm__ __volatile__ (
 		"	.set push		# arch_spin_trylock	\n"
 		"	.set noreorder					\n"
 		"							\n"
-		"	ll	%[ticket], %[ticket_ptr]		\n"
-		"1:	srl	%[my_ticket], %[ticket], 14		\n"
-		"	andi	%[my_ticket], %[my_ticket], 0x1fff	\n"
-		"	andi	%[now_serving], %[ticket], 0x1fff	\n"
+		"1:	ll	%[ticket], %[ticket_ptr]		\n"
+		"	srl	%[my_ticket], %[ticket], 16		\n"
+		"	andi	%[my_ticket], %[my_ticket], 0xffff	\n"
+		"	andi	%[now_serving], %[ticket], 0xffff	\n"
 		"	bne	%[my_ticket], %[now_serving], 3f	\n"
-		"	 addiu	%[ticket], %[ticket], 0x4000		\n"
+		"	 addu	%[ticket], %[ticket], %[inc]		\n"
 		"	sc	%[ticket], %[ticket_ptr]		\n"
-		"	beqz	%[ticket], 4f				\n"
+		"	beqz	%[ticket], 1b				\n"
 		"	 li	%[ticket], 1				\n"
 		"2:							\n"
 		"	.subsection 2					\n"
 		"3:	b	2b					\n"
 		"	 li	%[ticket], 0				\n"
-		"4:	b	1b					\n"
-		"	 ll	%[ticket], %[ticket_ptr]		\n"
 		"	.previous					\n"
 		"	.set pop					\n"
 		: [ticket_ptr] "+m" (lock->lock),
 		  [ticket] "=&r" (tmp),
 		  [my_ticket] "=&r" (tmp2),
-		  [now_serving] "=&r" (tmp3));
+		  [now_serving] "=&r" (tmp3)
+		: [inc] "r" (inc));
 	}
 
 	smp_llsc_mb();
@@ -305,7 +273,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 {
 	unsigned int tmp;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (R10000_LLSC_WAR) {
 		__asm__ __volatile__(
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
index ee197c2..c52f360 100644
--- a/arch/mips/include/asm/spinlock_types.h
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -5,16 +5,28 @@
 # error "please don't include this file directly"
 #endif
 
-typedef struct {
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+
+typedef union {
 	/*
-	 * bits  0..13: serving_now
-	 * bits 14    : junk data
-	 * bits 15..28: ticket
+	 * bits  0..15 : serving_now
+	 * bits 16..31 : ticket
 	 */
-	unsigned int lock;
+	u32 lock;
+	struct {
+#ifdef __BIG_ENDIAN
+		u16 ticket;
+		u16 serving_now;
+#else
+		u16 serving_now;
+		u16 ticket;
+#endif
+	} h;
 } arch_spinlock_t;
 
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ .lock = 0 }
 
 typedef struct {
 	volatile unsigned int lock;
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 3b6da33..58730c5 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -121,6 +121,25 @@
 		.endm
 #else
 		.macro	get_saved_sp	/* Uniprocessor variation */
+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
+		/*
+		 * Clear BTB (branch target buffer), forbid RAS (return address
+		 * stack) to workaround the Out-of-order Issue in Loongson2F
+		 * via its diagnostic register.
+		 */
+		move	k0, ra
+		jal	1f
+		 nop
+1:		jal	1f
+		 nop
+1:		jal	1f
+		 nop
+1:		jal	1f
+		 nop
+1:		move	ra, k0
+		li	k0, 3
+		mtc0	k0, $22
+#endif /* CONFIG_CPU_LOONGSON2F */
 #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		lui	k1, %hi(kernelsp)
 #else
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index 83b5509..bb937cc 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -95,6 +95,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 {
 	__u32 retval;
 
+	smp_mb__before_llsc();
+
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
@@ -147,6 +149,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 {
 	__u64 retval;
 
+	smp_mb__before_llsc();
+
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 845da21..2376f2e 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -112,7 +112,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_FIXADE		20	/* Fix address errors in software */
 #define TIF_LOGADE		21	/* Log address errors to syslog */
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 827dc22..64887d3 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -42,7 +42,6 @@ struct txx9_board_vec {
 };
 extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
-char *prom_getcmdline(void);
 const char *prom_getenv(const char *name);
 void txx9_wdt_init(unsigned long base);
 void txx9_wdt_now(unsigned long base);
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
new file mode 100644
index 0000000..697e40c
--- /dev/null
+++ b/arch/mips/include/asm/uasm.h
@@ -0,0 +1,215 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005, 2006, 2008  Thiemo Seufer
+ * Copyright (C) 2005  Maciej W. Rozycki
+ * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
+ */
+
+#include <linux/types.h>
+
+#define Ip_u1u2u3(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u2u1u3(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u3u1u2(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u1u2s3(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
+
+#define Ip_u2s3u1(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
+
+#define Ip_u2u1s3(op)							\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
+
+#define Ip_u2u1msbu3(op)						\
+void __cpuinit								\
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c,	\
+	   unsigned int d)
+
+#define Ip_u1u2(op)							\
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
+
+#define Ip_u1s2(op)							\
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
+
+#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
+
+#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
+
+Ip_u2u1s3(_addiu);
+Ip_u3u1u2(_addu);
+Ip_u2u1u3(_andi);
+Ip_u3u1u2(_and);
+Ip_u1u2s3(_beq);
+Ip_u1u2s3(_beql);
+Ip_u1s2(_bgez);
+Ip_u1s2(_bgezl);
+Ip_u1s2(_bltz);
+Ip_u1s2(_bltzl);
+Ip_u1u2s3(_bne);
+Ip_u2s3u1(_cache);
+Ip_u1u2u3(_dmfc0);
+Ip_u1u2u3(_dmtc0);
+Ip_u2u1s3(_daddiu);
+Ip_u3u1u2(_daddu);
+Ip_u2u1u3(_dsll);
+Ip_u2u1u3(_dsll32);
+Ip_u2u1u3(_dsra);
+Ip_u2u1u3(_dsrl);
+Ip_u2u1u3(_dsrl32);
+Ip_u2u1u3(_drotr);
+Ip_u3u1u2(_dsubu);
+Ip_0(_eret);
+Ip_u1(_j);
+Ip_u1(_jal);
+Ip_u1(_jr);
+Ip_u2s3u1(_ld);
+Ip_u2s3u1(_ll);
+Ip_u2s3u1(_lld);
+Ip_u1s2(_lui);
+Ip_u2s3u1(_lw);
+Ip_u1u2u3(_mfc0);
+Ip_u1u2u3(_mtc0);
+Ip_u2u1u3(_ori);
+Ip_u3u1u2(_or);
+Ip_u2s3u1(_pref);
+Ip_0(_rfe);
+Ip_u2s3u1(_sc);
+Ip_u2s3u1(_scd);
+Ip_u2s3u1(_sd);
+Ip_u2u1u3(_sll);
+Ip_u2u1u3(_sra);
+Ip_u2u1u3(_srl);
+Ip_u2u1u3(_rotr);
+Ip_u3u1u2(_subu);
+Ip_u2s3u1(_sw);
+Ip_0(_tlbp);
+Ip_0(_tlbr);
+Ip_0(_tlbwi);
+Ip_0(_tlbwr);
+Ip_u3u1u2(_xor);
+Ip_u2u1u3(_xori);
+Ip_u2u1msbu3(_dins);
+Ip_u1(_syscall);
+
+/* Handle labels. */
+struct uasm_label {
+	u32 *addr;
+	int lab;
+};
+
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
+#ifdef CONFIG_64BIT
+int uasm_in_compat_space_p(long addr);
+#endif
+int uasm_rel_hi(long val);
+int uasm_rel_lo(long val);
+void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
+void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
+
+#define UASM_L_LA(lb)							\
+static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
+{									\
+	uasm_build_label(lab, addr, label##lb);				\
+}
+
+/* convenience macros for instructions */
+#ifdef CONFIG_64BIT
+# define UASM_i_LW(buf, rs, rt, off) uasm_i_ld(buf, rs, rt, off)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
+# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh)
+# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh)
+# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_drotr(buf, rs, rt, sh)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
+# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_dsubu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
+#else
+# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
+# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
+# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh)
+# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_rotr(buf, rs, rt, sh)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
+# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_subu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
+#endif
+
+#define uasm_i_b(buf, off) uasm_i_beq(buf, 0, 0, off)
+#define uasm_i_beqz(buf, rs, off) uasm_i_beq(buf, rs, 0, off)
+#define uasm_i_beqzl(buf, rs, off) uasm_i_beql(buf, rs, 0, off)
+#define uasm_i_bnez(buf, rs, off) uasm_i_bne(buf, rs, 0, off)
+#define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
+#define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
+#define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
+#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
+#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
+
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsrl(p, a1, a2, a3);
+	else
+		uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
+static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsll(p, a1, a2, a3);
+	else
+		uasm_i_dsll32(p, a1, a2, a3 - 32);
+}
+
+/* Handle relocations. */
+struct uasm_reloc {
+	u32 *addr;
+	unsigned int type;
+	int lab;
+};
+
+/* This is zero so we can use zeroed label arrays. */
+#define UASM_LABEL_INVALID 0
+
+void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
+void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
+void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
+void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
+void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
+	u32 *first, u32 *end, u32 *target);
+int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
+
+/* Convenience functions for labeled branches. */
+void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
+void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
+		 unsigned int reg2, int lid);
+void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h
index 8a4b20e..9bc07b9 100644
--- a/arch/mips/include/asm/ucontext.h
+++ b/arch/mips/include/asm/ucontext.h
@@ -1,21 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Low level exception handling
- *
- * Copyright (C) 1998, 1999 by Ralf Baechle
- */
-#ifndef _ASM_UCONTEXT_H
-#define _ASM_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* _ASM_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 65c679e..baa318a 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -984,16 +984,17 @@
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
+#define __NR_getdents64			(__NR_Linux + 299)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		298
+#define __NR_Linux_syscalls		299
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		298
+#define __NR_N32_Linux_syscalls		299
 
 #ifdef __KERNEL__
 
@@ -1004,6 +1005,7 @@
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_UTIME
@@ -1013,6 +1015,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h
new file mode 100644
index 0000000..cca56aa
--- /dev/null
+++ b/arch/mips/include/asm/vdso.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+#include <linux/types.h>
+
+
+#ifdef CONFIG_32BIT
+struct mips_vdso {
+	u32 signal_trampoline[2];
+	u32 rt_signal_trampoline[2];
+};
+#else  /* !CONFIG_32BIT */
+struct mips_vdso {
+	u32 o32_signal_trampoline[2];
+	u32 o32_rt_signal_trampoline[2];
+	u32 rt_signal_trampoline[2];
+	u32 n32_rt_signal_trampoline[2];
+};
+#endif /* CONFIG_32BIT */
+
+#endif /* __ASM_VDSO_H */
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 7bd32d0..ee18028 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -20,17 +20,17 @@
 #include <asm/jazz.h>
 #include <asm/pgtable.h>
 
-static DEFINE_SPINLOCK(r4030_lock);
+static DEFINE_RAW_SPINLOCK(r4030_lock);
 
 static void enable_r4030_irq(unsigned int irq)
 {
 	unsigned int mask = 1 << (irq - JAZZ_IRQ_START);
 	unsigned long flags;
 
-	spin_lock_irqsave(&r4030_lock, flags);
+	raw_spin_lock_irqsave(&r4030_lock, flags);
 	mask |= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
 	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
-	spin_unlock_irqrestore(&r4030_lock, flags);
+	raw_spin_unlock_irqrestore(&r4030_lock, flags);
 }
 
 void disable_r4030_irq(unsigned int irq)
@@ -38,10 +38,10 @@ void disable_r4030_irq(unsigned int irq)
 	unsigned int mask = ~(1 << (irq - JAZZ_IRQ_START));
 	unsigned long flags;
 
-	spin_lock_irqsave(&r4030_lock, flags);
+	raw_spin_lock_irqsave(&r4030_lock, flags);
 	mask &= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
 	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
-	spin_unlock_irqrestore(&r4030_lock, flags);
+	raw_spin_unlock_irqrestore(&r4030_lock, flags);
 }
 
 static struct irq_chip r4030_irq_type = {
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 0d64d0f..9ce9f64 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/gfp.h>
 #include <asm/mipsregs.h>
 #include <asm/jazz.h>
 #include <asm/io.h>
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index 7043f6b..0d0f054 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -76,15 +76,9 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,		/* orig-x, orig-y */
-		0,		/* unused */
-		0,		/* orig_video_page */
-		0,		/* orig_video_mode */
-		160,		/* orig_video_cols */
-		0, 0, 0,	/* unused, ega_bx, unused */
-		64,		/* orig_video_lines */
-		0,		/* orig_video_isVGA */
-		16		/* orig_video_points */
+		.orig_video_cols	= 160,
+		.orig_video_lines	= 64,
+		.orig_video_points	= 16,
 	};
 #endif
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 9326af5..7a6ac50 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -6,7 +6,7 @@ extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   ptrace.o reset.o setup.o signal.o syscall.o \
-		   time.o topology.o traps.o unaligned.o watch.o
+		   time.o topology.o traps.o unaligned.o watch.o vdso.o
 
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
@@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
 
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 2c1e1d0..ca6c832 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -188,11 +188,15 @@ void output_mm_defines(void)
 	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
 	BLANK();
 	DEFINE(_PGD_T_LOG2, PGD_T_LOG2);
+#ifndef __PAGETABLE_PMD_FOLDED
 	DEFINE(_PMD_T_LOG2, PMD_T_LOG2);
+#endif
 	DEFINE(_PTE_T_LOG2, PTE_T_LOG2);
 	BLANK();
 	DEFINE(_PGD_ORDER, PGD_ORDER);
+#ifndef __PAGETABLE_PMD_FOLDED
 	DEFINE(_PMD_ORDER, PMD_ORDER);
+#endif
 	DEFINE(_PTE_ORDER, PTE_ORDER);
 	BLANK();
 	DEFINE(_PMD_SHIFT, PMD_SHIFT);
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index f5d265e..392ef37 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -25,7 +25,7 @@
 #include <asm/gt64120.h>
 #include <asm/time.h>
 
-static DEFINE_SPINLOCK(gt641xx_timer_lock);
+static DEFINE_RAW_SPINLOCK(gt641xx_timer_lock);
 static unsigned int gt641xx_base_clock;
 
 void gt641xx_set_base_clock(unsigned int clock)
@@ -49,7 +49,7 @@ static int gt641xx_timer0_set_next_event(unsigned long delta,
 {
 	u32 ctrl;
 
-	spin_lock(&gt641xx_timer_lock);
+	raw_spin_lock(&gt641xx_timer_lock);
 
 	ctrl = GT_READ(GT_TC_CONTROL_OFS);
 	ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
@@ -58,7 +58,7 @@ static int gt641xx_timer0_set_next_event(unsigned long delta,
 	GT_WRITE(GT_TC0_OFS, delta);
 	GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
 
-	spin_unlock(&gt641xx_timer_lock);
+	raw_spin_unlock(&gt641xx_timer_lock);
 
 	return 0;
 }
@@ -68,7 +68,7 @@ static void gt641xx_timer0_set_mode(enum clock_event_mode mode,
 {
 	u32 ctrl;
 
-	spin_lock(&gt641xx_timer_lock);
+	raw_spin_lock(&gt641xx_timer_lock);
 
 	ctrl = GT_READ(GT_TC_CONTROL_OFS);
 	ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
@@ -86,7 +86,7 @@ static void gt641xx_timer0_set_mode(enum clock_event_mode mode,
 
 	GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
 
-	spin_unlock(&gt641xx_timer_lock);
+	raw_spin_unlock(&gt641xx_timer_lock);
 }
 
 static void gt641xx_timer0_event_handler(struct clock_event_device *dev)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 80e202e..3562b85 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -125,6 +125,30 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
+static int __cpuinitdata mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+	cpu_data[0].options &= ~MIPS_CPU_FPU;
+	mips_fpu_disabled = 1;
+
+	return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
+int __cpuinitdata mips_dsp_disabled;
+
+static int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~MIPS_ASE_DSP;
+	mips_dsp_disabled = 1;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
+
 void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -162,6 +186,7 @@ void __init check_wait(void)
 	case CPU_BCM6348:
 	case CPU_BCM6358:
 	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
 		cpu_wait = r4k_wait;
 		break;
 
@@ -284,6 +309,15 @@ static inline int __cpu_has_fpu(void)
 	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 }
 
+static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
+{
+#ifdef __NEED_VMBITS_PROBE
+	write_c0_entryhi(0x3fffffffffffe000ULL);
+	back_to_back_c0_hazard();
+	c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
+#endif
+}
+
 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 		| MIPS_CPU_COUNTER)
 
@@ -691,6 +725,19 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 	return config3 & MIPS_CONF_M;
 }
 
+static inline unsigned int decode_config4(struct cpuinfo_mips *c)
+{
+	unsigned int config4;
+
+	config4 = read_c0_config4();
+
+	if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
+	    && cpu_has_tlb)
+		c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+
+	return config4 & MIPS_CONF_M;
+}
+
 static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 {
 	int ok;
@@ -709,6 +756,8 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 		ok = decode_config2(c);
 	if (ok)
 		ok = decode_config3(c);
+	if (ok)
+		ok = decode_config4(c);
 
 	mips_probe_watch_registers(c);
 }
@@ -722,9 +771,6 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "MIPS 4Kc";
 		break;
 	case PRID_IMP_4KEC:
-		c->cputype = CPU_4KEC;
-		__cpu_name[cpu] = "MIPS 4KEc";
-		break;
 	case PRID_IMP_4KECR2:
 		c->cputype = CPU_4KEC;
 		__cpu_name[cpu] = "MIPS 4KEc";
@@ -890,12 +936,18 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:
 	case PRID_IMP_CAVIUM_CN30XX:
+		c->cputype = CPU_CAVIUM_OCTEON;
+		__cpu_name[cpu] = "Cavium Octeon";
+		goto platform;
 	case PRID_IMP_CAVIUM_CN58XX:
 	case PRID_IMP_CAVIUM_CN56XX:
 	case PRID_IMP_CAVIUM_CN50XX:
 	case PRID_IMP_CAVIUM_CN52XX:
-		c->cputype = CPU_CAVIUM_OCTEON;
-		__cpu_name[cpu] = "Cavium Octeon";
+		c->cputype = CPU_CAVIUM_OCTEON_PLUS;
+		__cpu_name[cpu] = "Cavium Octeon+";
+platform:
+		if (cpu == 0)
+			__elf_platform = "octeon";
 		break;
 	default:
 		printk(KERN_INFO "Unknown Octeon chip!\n");
@@ -905,6 +957,7 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 }
 
 const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
 
 __cpuinit void cpu_probe(void)
 {
@@ -953,6 +1006,12 @@ __cpuinit void cpu_probe(void)
 	 */
 	BUG_ON(current_cpu_type() != c->cputype);
 
+	if (mips_fpu_disabled)
+		c->options &= ~MIPS_CPU_FPU;
+
+	if (mips_dsp_disabled)
+		c->ases &= ~MIPS_ASE_DSP;
+
 	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
 
@@ -969,6 +1028,8 @@ __cpuinit void cpu_probe(void)
 		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
 	else
 		c->srsets = 1;
+
+	cpu_probe_vmbits(c);
 }
 
 __cpuinit void cpu_report(void)
diff --git a/arch/mips/kernel/cpufreq/loongson2_clock.c b/arch/mips/kernel/cpufreq/loongson2_clock.c
index d7ca256..cefc6e2 100644
--- a/arch/mips/kernel/cpufreq/loongson2_clock.c
+++ b/arch/mips/kernel/cpufreq/loongson2_clock.c
@@ -164,3 +164,7 @@ void loongson2_cpu_wait(void)
 	spin_unlock_irqrestore(&loongson2_wait_lock, flags);
 }
 EXPORT_SYMBOL_GPL(loongson2_cpu_wait);
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson 2F");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
index 2f6a0b1..ae5db20 100644
--- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
+++ b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
@@ -65,7 +65,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 		return -ENODEV;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	if (cpufreq_frequency_table_target
 	    (policy, &loongson2_clockmod_table[0], target_freq, relation,
@@ -91,7 +91,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 	/* notifiers */
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	/* setting the cpu frequency */
 	clk_set_rate(cpuclk, freq);
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 68b0670..5a84a1f 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -2,8 +2,8 @@
  * Code for replacing ftrace calls with jumps.
  *
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2009 DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * Thanks goes to Steven Rostedt for writing the original x86 version.
  */
@@ -12,18 +12,62 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
-#include <asm/cacheflush.h>
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/uasm.h>
+
+/*
+ * If the Instruction Pointer is in module space (0xc0000000), return true;
+ * otherwise, it is in kernel space (0x80000000), return false.
+ *
+ * FIXME: This will not work when the kernel space and module space are the
+ * same. If they are the same, we need to modify scripts/recordmcount.pl,
+ * ftrace_make_nop/call() and the other related parts to ensure the
+ * enabling/disabling of the calling site to _mcount is right for both kernel
+ * and module.
+ */
+
+static inline int in_module(unsigned long ip)
+{
+	return ip & 0x40000000;
+}
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
-#define jump_insn_encode(op_code, addr) \
-	((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
 
-static unsigned int ftrace_nop = 0x00000000;
+#define INSN_B_1F_4 0x10000004	/* b 1f; offset = 4 */
+#define INSN_B_1F_5 0x10000005	/* b 1f; offset = 5 */
+#define INSN_NOP 0x00000000	/* nop */
+#define INSN_JAL(addr)	\
+	((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_lui_v1_hi16_mcount __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+	u32 *buf;
+	unsigned int v1;
+
+	/* lui v1, hi16_mcount */
+	v1 = 3;
+	buf = (u32 *)&insn_lui_v1_hi16_mcount;
+	UASM_i_LA_mostly(&buf, v1, MCOUNT_ADDR);
+
+	/* jal (ftrace_caller + 8), jump over the first two instruction */
+	buf = (u32 *)&insn_jal_ftrace_caller;
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* j ftrace_graph_caller */
+	buf = (u32 *)&insn_j_ftrace_graph_caller;
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+#endif
+}
 
 static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 {
@@ -40,67 +84,56 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	return 0;
 }
 
-static int lui_v1;
-static int jal_mcount;
-
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
-	int faulted;
 	unsigned long ip = rec->ip;
 
-	/* We have compiled module with -mlong-calls, but compiled the kernel
-	 * without it, we need to cope with them respectively. */
-	if (ip & 0x40000000) {
-		/* record it for ftrace_make_call */
-		if (lui_v1 == 0) {
-			/* lui_v1 = *(unsigned int *)ip; */
-			safe_load_code(lui_v1, ip, faulted);
-
-			if (unlikely(faulted))
-				return -EFAULT;
-		}
-
-		/* lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+	/*
+	 * We have compiled module with -mlong-calls, but compiled the kernel
+	 * without it, we need to cope with them respectively.
+	 */
+	if (in_module(ip)) {
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000005)
+		 * addiu v1, v1, low_16bit_of_mcount
+		 * move at, ra
+		 * move $12, ra_address
+		 * jalr v1
+		 *  sub sp, sp, 8
+		 *                                  1: offset = 5 instructions
+		 */
+		new = INSN_B_1F_5;
+#else
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
 		 * addiu v1, v1, low_16bit_of_mcount
 		 * move at, ra
 		 * jalr v1
-		 * nop
-		 * 				     1f: (ip + 12)
+		 *  nop | move $12, ra_address | sub sp, sp, 8
+		 *                                  1: offset = 4 instructions
 		 */
-		new = 0x10000004;
+		new = INSN_B_1F_4;
+#endif
 	} else {
-		/* record/calculate it for ftrace_make_call */
-		if (jal_mcount == 0) {
-			/* We can record it directly like this:
-			 *     jal_mcount = *(unsigned int *)ip;
-			 * Herein, jump over the first two nop instructions */
-			jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
-		}
-
-		/* move at, ra
-		 * jalr v1		--> nop
+		/*
+		 * move at, ra
+		 * jal _mcount		--> nop
 		 */
-		new = ftrace_nop;
+		new = INSN_NOP;
 	}
 	return ftrace_modify_code(ip, new);
 }
 
-static int modified;	/* initialized as 0 by default */
-
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
-	/* We just need to remove the "b ftrace_stub" at the fist time! */
-	if (modified == 0) {
-		modified = 1;
-		ftrace_modify_code(addr, ftrace_nop);
-	}
 	/* ip, module: 0xc0000000, kernel: 0x80000000 */
-	new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+	new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
 
 	return ftrace_modify_code(ip, new);
 }
@@ -111,44 +144,48 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned int new;
 
-	new = jump_insn_encode(JAL, (unsigned long)func);
+	new = INSN_JAL((unsigned long)func);
 
 	return ftrace_modify_code(FTRACE_CALL_IP, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
+	/* Encode the instructions when booting */
+	ftrace_dyn_arch_init_insns();
+
+	/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+	ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
 	/* The return code is retured via data */
 	*(unsigned long *)data = 0;
 
 	return 0;
 }
-#endif				/* CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 extern void ftrace_graph_call(void);
-#define JMP	0x08000000	/* jump to target directly */
-#define CALL_FTRACE_GRAPH_CALLER \
-	jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
 #define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
 
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
-				  CALL_FTRACE_GRAPH_CALLER);
+			insn_j_ftrace_graph_caller);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
 }
 
-#endif				/* !CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
+
 #define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
 #define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
@@ -162,17 +199,17 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 	unsigned int code;
 	int faulted;
 
-	/* in module or kernel? */
-	if (self_addr & 0x40000000) {
-		/* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
-		ip = self_addr - 20;
-	} else {
-		/* kernel: move to the instruction "move ra, at" */
-		ip = self_addr - 12;
-	}
+	/*
+	 * For module, move the ip from calling site of mcount to the
+	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
+	 * kernel, move to the instruction "move ra, at"(offset is 12)
+	 */
+	ip = self_addr - (in_module(self_addr) ? 20 : 12);
 
-	/* search the text until finding the non-store instruction or "s{d,w}
-	 * ra, offset(sp)" instruction */
+	/*
+	 * search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction
+	 */
 	do {
 		ip -= 4;
 
@@ -181,10 +218,11 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 
 		if (unlikely(faulted))
 			return 0;
-
-		/* If we hit the non-store instruction before finding where the
+		/*
+		 * If we hit the non-store instruction before finding where the
 		 * ra is stored, then this is a leaf function and it does not
-		 * store the ra on the stack. */
+		 * store the ra on the stack
+		 */
 		if ((code & S_R_SP) != S_R_SP)
 			return parent_addr;
 
@@ -202,7 +240,7 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
 	return 0;
 }
 
-#endif
+#endif	/* !KBUILD_MCOUNT_RA_ADDRESS */
 
 /*
  * Hook the return address and push it in the stack of return addrs
@@ -220,7 +258,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	/* "parent" is the stack address saved the return address of the caller
+	/*
+	 * "parent" is the stack address saved the return address of the caller
 	 * of _mcount.
 	 *
 	 * if the gcc < 4.5, a leaf function does not save the return address
@@ -242,10 +281,11 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		goto out;
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
 	parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
-							 (unsigned long)parent,
-							 fp);
-	/* If fails when getting the stack address of the non-leaf function's
-	 * ra, stop function graph tracer and return */
+			(unsigned long)parent, fp);
+	/*
+	 * If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return
+	 */
 	if (parent == 0)
 		goto out;
 #endif
@@ -272,4 +312,4 @@ out:
 	ftrace_graph_stop();
 	WARN_ON(1);
 }
-#endif				/* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index ed5c441..9479406 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,7 +15,7 @@
 #include <asm/io.h>
 #include <asm/time.h>
 
-DEFINE_SPINLOCK(i8253_lock);
+DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
 /*
@@ -26,7 +26,7 @@ EXPORT_SYMBOL(i8253_lock);
 static void init_pit_timer(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -55,7 +55,7 @@ static void init_pit_timer(enum clock_event_mode mode,
 		/* Nothing to do here */
 		break;
 	}
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 }
 
 /*
@@ -65,10 +65,10 @@ static void init_pit_timer(enum clock_event_mode mode,
  */
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 	outb_p(delta & 0xff , PIT_CH0);	/* LSB */
 	outb(delta >> 8 , PIT_CH0);	/* MSB */
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 
 	return 0;
 }
@@ -137,7 +137,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	static int old_count;
 	static u32 old_jifs;
 
-	spin_lock_irqsave(&i8253_lock, flags);
+	raw_spin_lock_irqsave(&i8253_lock, flags);
 	/*
 	 * Although our caller may have the read side of xtime_lock,
 	 * this is now a seqlock, and we are cheating in this routine
@@ -183,7 +183,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	old_count = count;
 	old_jifs = jifs;
 
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
 
 	count = (LATCH - 1) - count;
 
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index 01c0885..2779911 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -29,7 +29,7 @@
  */
 
 static int i8259A_auto_eoi = -1;
-DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_RAW_SPINLOCK(i8259A_lock);
 static void disable_8259A_irq(unsigned int irq);
 static void enable_8259A_irq(unsigned int irq);
 static void mask_and_ack_8259A(unsigned int irq);
@@ -65,13 +65,13 @@ static void disable_8259A_irq(unsigned int irq)
 
 	irq -= I8259A_IRQ_BASE;
 	mask = 1 << irq;
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask |= mask;
 	if (irq & 8)
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
 		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
 static void enable_8259A_irq(unsigned int irq)
@@ -81,13 +81,13 @@ static void enable_8259A_irq(unsigned int irq)
 
 	irq -= I8259A_IRQ_BASE;
 	mask = ~(1 << irq);
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask &= mask;
 	if (irq & 8)
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
 		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
 int i8259A_irq_pending(unsigned int irq)
@@ -98,12 +98,12 @@ int i8259A_irq_pending(unsigned int irq)
 
 	irq -= I8259A_IRQ_BASE;
 	mask = 1 << irq;
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	if (irq < 8)
 		ret = inb(PIC_MASTER_CMD) & mask;
 	else
 		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	return ret;
 }
@@ -151,7 +151,7 @@ static void mask_and_ack_8259A(unsigned int irq)
 
 	irq -= I8259A_IRQ_BASE;
 	irqmask = 1 << irq;
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	/*
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
@@ -183,7 +183,7 @@ handle_real_irq:
 		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
 	}
 	smtc_im_ack_irq(irq);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
 
 spurious_8259A_irq:
@@ -264,7 +264,7 @@ static void init_8259A(int auto_eoi)
 
 	i8259A_auto_eoi = auto_eoi;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
@@ -298,7 +298,7 @@ static void init_8259A(int auto_eoi)
 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
 /*
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index ebcc5f7..42ef814 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -27,18 +27,18 @@
 
 #define GT641XX_IRQ_TO_BIT(irq)	(1U << (irq - GT641XX_IRQ_BASE))
 
-static DEFINE_SPINLOCK(gt641xx_irq_lock);
+static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock);
 
 static void ack_gt641xx_irq(unsigned int irq)
 {
 	unsigned long flags;
 	u32 cause;
 
-	spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
 	cause = GT_READ(GT_INTRCAUSE_OFS);
 	cause &= ~GT641XX_IRQ_TO_BIT(irq);
 	GT_WRITE(GT_INTRCAUSE_OFS, cause);
-	spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
 }
 
 static void mask_gt641xx_irq(unsigned int irq)
@@ -46,11 +46,11 @@ static void mask_gt641xx_irq(unsigned int irq)
 	unsigned long flags;
 	u32 mask;
 
-	spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
 	mask = GT_READ(GT_INTRMASK_OFS);
 	mask &= ~GT641XX_IRQ_TO_BIT(irq);
 	GT_WRITE(GT_INTRMASK_OFS, mask);
-	spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
 }
 
 static void mask_ack_gt641xx_irq(unsigned int irq)
@@ -58,7 +58,7 @@ static void mask_ack_gt641xx_irq(unsigned int irq)
 	unsigned long flags;
 	u32 cause, mask;
 
-	spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
 	mask = GT_READ(GT_INTRMASK_OFS);
 	mask &= ~GT641XX_IRQ_TO_BIT(irq);
 	GT_WRITE(GT_INTRMASK_OFS, mask);
@@ -66,7 +66,7 @@ static void mask_ack_gt641xx_irq(unsigned int irq)
 	cause = GT_READ(GT_INTRCAUSE_OFS);
 	cause &= ~GT641XX_IRQ_TO_BIT(irq);
 	GT_WRITE(GT_INTRCAUSE_OFS, cause);
-	spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
 }
 
 static void unmask_gt641xx_irq(unsigned int irq)
@@ -74,11 +74,11 @@ static void unmask_gt641xx_irq(unsigned int irq)
 	unsigned long flags;
 	u32 mask;
 
-	spin_lock_irqsave(&gt641xx_irq_lock, flags);
+	raw_spin_lock_irqsave(&gt641xx_irq_lock, flags);
 	mask = GT_READ(GT_INTRMASK_OFS);
 	mask |= GT641XX_IRQ_TO_BIT(irq);
 	GT_WRITE(GT_INTRMASK_OFS, mask);
-	spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&gt641xx_irq_lock, flags);
 }
 
 static struct irq_chip gt641xx_irq_chip = {
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 981f86c..c6345f5 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -15,7 +15,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/proc_fs.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/random.h>
 #include <linux/sched.h>
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 50c9bb8..9b78ff6 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -180,6 +180,11 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	*(ptr++) = regs->cp0_epc;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->cp0_epc = pc;
+}
+
 /*
  * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
  * then try to fall into the debugger
@@ -198,7 +203,7 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	if (atomic_read(&kgdb_active) != -1)
 		kgdb_nmicallback(smp_processor_id(), regs);
 
-	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+	if (kgdb_handle_exception(trap, compute_signal(trap), cmd, regs))
 		return NOTIFY_DONE;
 
 	if (atomic_read(&kgdb_setting_breakpoint))
@@ -212,6 +217,26 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	return NOTIFY_STOP;
 }
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr	= trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return kgdb_mips_notify(NULL, cmd, &args);
+}
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 static struct notifier_block kgdb_notifier = {
 	.notifier_call = kgdb_mips_notify,
 };
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index f042563..c2dab14 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -9,14 +9,12 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/file.h>
-#include <linux/smp_lock.h>
 #include <linux/highuid.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
 #include <linux/times.h>
 #include <linux/poll.h>
-#include <linux/slab.h>
 #include <linux/skbuff.h>
 #include <linux/filter.h>
 #include <linux/shm.h>
@@ -35,6 +33,7 @@
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ipc.h>
+#include <linux/slab.h>
 
 #include <net/sock.h>
 #include <net/scm.h>
@@ -250,22 +249,6 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
 }
 #endif
 
-SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
-{
-	int ret = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof *name))
-		ret = -EFAULT;
-	up_read(&uts_sem);
-
-	if (current->personality == PER_LINUX32 && !ret)
-		if (copy_to_user(name->machine, "mips\0\0\0", 8))
-			ret = -EFAULT;
-
-	return ret;
-}
-
 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 0a9cfdb..6bfcb7a 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -6,7 +6,8 @@
  * more details.
  *
  * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
 #include <asm/regdef.h>
@@ -45,8 +46,6 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#endif
-#ifdef CONFIG_64BIT
 	PTR_ADDIU	sp, PT_SIZE
 #else
 	PTR_ADDIU	sp, (PT_SIZE + 8)
@@ -58,6 +57,12 @@
 	 move ra, AT
 	.endm
 
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG	$12
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 NESTED(ftrace_caller, PT_SIZE, ra)
@@ -71,14 +76,14 @@ _mcount:
 
 	MCOUNT_SAVE_REGS
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_S	t0, PT_R12(sp)	/* t0 saved the location of the return address(at) by -mmcount-ra-address */
+	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call
@@ -119,9 +124,9 @@ NESTED(_mcount, PT_SIZE, ra)
 static_trace:
 	MCOUNT_SAVE_REGS
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	jalr	t2		/* (1) call *ftrace_trace_function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 	MCOUNT_RESTORE_REGS
 	.globl ftrace_stub
@@ -134,28 +139,34 @@ ftrace_stub:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 NESTED(ftrace_graph_caller, PT_SIZE, ra)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	PTR_L	a1, PT_R31(sp)	/* load the original ra from the stack */
-#ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_L	t0, PT_R12(sp)	/* load the original t0 from the stack */
-#endif
-#else
+#ifndef CONFIG_DYNAMIC_FTRACE
 	MCOUNT_SAVE_REGS
-	move	a1, ra		/* arg2: next ip, selfaddr */
 #endif
 
+	/* arg1: Get the location of the parent's return address */
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	bnez	t0, 1f		/* non-leaf func: t0 saved the location of the return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a0, PT_R12(sp)
+#else
+	move	a0, MCOUNT_RA_ADDRESS_REG
+#endif
+	bnez	a0, 1f	/* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
 	 nop
-	PTR_LA	t0, PT_R1(sp)	/* leaf func: get the location of at(old ra) from our own stack */
-1:	move	a0, t0		/* arg1: the location of the return address */
+#endif
+	PTR_LA	a0, PT_R1(sp)	/* leaf func: the location in current stack */
+1:
+
+	/* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)
 #else
-	PTR_LA	a0, PT_R1(sp)	/* arg1: &AT -> a0 */
+	move	a1, ra
 #endif
-	jal	prepare_ftrace_return
+
+	/* arg3: Get frame pointer of current stack */
 #ifdef CONFIG_FRAME_POINTER
-	 move	a2, fp		/* arg3: frame pointer */
-#else
+	 move	a2, fp
+#else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
 	 PTR_LA	a2, PT_SIZE(sp)
 #else
@@ -163,6 +174,8 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
 #endif
 #endif
 
+	jal	prepare_ftrace_return
+	 nop
 	MCOUNT_RESTORE_REGS
 	RETURN_BACK
 	END(ftrace_graph_caller)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index cbc6182..2340f11 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 #include <linux/cpu.h>
+#include <linux/cpuset.h>
 #include <linux/cpumask.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -39,6 +40,21 @@ static inline struct task_struct *find_process_by_pid(pid_t pid)
 	return pid ? find_task_by_vpid(pid) : current;
 }
 
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+	const struct cred *cred = current_cred(), *pcred;
+	bool match;
+
+	rcu_read_lock();
+	pcred = __task_cred(p);
+	match = (cred->euid == pcred->euid ||
+		 cred->euid == pcred->uid);
+	rcu_read_unlock();
+	return match;
+}
 
 /*
  * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
@@ -46,12 +62,10 @@ static inline struct task_struct *find_process_by_pid(pid_t pid)
 asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 				      unsigned long __user *user_mask_ptr)
 {
-	cpumask_t new_mask;
-	cpumask_t effective_mask;
-	int retval;
-	struct task_struct *p;
+	cpumask_var_t cpus_allowed, new_mask, effective_mask;
 	struct thread_info *ti;
-	uid_t euid;
+	struct task_struct *p;
+	int retval;
 
 	if (len < sizeof(new_mask))
 		return -EINVAL;
@@ -60,53 +74,74 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 		return -EFAULT;
 
 	get_online_cpus();
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 
 	p = find_process_by_pid(pid);
 	if (!p) {
-		read_unlock(&tasklist_lock);
+		rcu_read_unlock();
 		put_online_cpus();
 		return -ESRCH;
 	}
 
-	/*
-	 * It is not safe to call set_cpus_allowed with the
-	 * tasklist_lock held.  We will bump the task_struct's
-	 * usage count and drop tasklist_lock before invoking
-	 * set_cpus_allowed.
-	 */
+	/* Prevent p going away */
 	get_task_struct(p);
+	rcu_read_unlock();
 
-	euid = current_euid();
+	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_put_task;
+	}
+	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_cpus_allowed;
+	}
+	if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_new_mask;
+	}
 	retval = -EPERM;
-	if (euid != p->cred->euid && euid != p->cred->uid &&
-	    !capable(CAP_SYS_NICE)) {
-		read_unlock(&tasklist_lock);
+	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
 		goto out_unlock;
-	}
 
 	retval = security_task_setscheduler(p, 0, NULL);
 	if (retval)
 		goto out_unlock;
 
 	/* Record new user-specified CPU set for future reference */
-	p->thread.user_cpus_allowed = new_mask;
-
-	/* Unlock the task list */
-	read_unlock(&tasklist_lock);
+	cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
 
+ again:
 	/* Compute new global allowed CPU set if necessary */
 	ti = task_thread_info(p);
 	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
-	    cpus_intersects(new_mask, mt_fpu_cpumask)) {
-		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed(p, effective_mask);
+	    cpus_intersects(*new_mask, mt_fpu_cpumask)) {
+		cpus_and(*effective_mask, *new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed_ptr(p, effective_mask);
 	} else {
+		cpumask_copy(effective_mask, new_mask);
 		clear_ti_thread_flag(ti, TIF_FPUBOUND);
-		retval = set_cpus_allowed(p, new_mask);
+		retval = set_cpus_allowed_ptr(p, new_mask);
 	}
 
+	if (!retval) {
+		cpuset_cpus_allowed(p, cpus_allowed);
+		if (!cpumask_subset(effective_mask, cpus_allowed)) {
+			/*
+			 * We must have raced with a concurrent cpuset
+			 * update. Just reset the cpus_allowed to the
+			 * cpuset's cpus_allowed
+			 */
+			cpumask_copy(new_mask, cpus_allowed);
+			goto again;
+		}
+	}
 out_unlock:
+	free_cpumask_var(effective_mask);
+out_free_new_mask:
+	free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+	free_cpumask_var(cpus_allowed);
+out_put_task:
 	put_task_struct(p);
 	put_online_cpus();
 	return retval;
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 3952b83..dd18b26 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -500,4 +500,3 @@ done_restore:
 	 nop
 	END(octeon_mult_restore)
 	.set pop
-
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index f3d73e1..9996094 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -17,7 +17,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/personality.h>
 #include <linux/sys.h>
@@ -64,8 +63,13 @@ void __noreturn cpu_idle(void)
 
 			smtc_idle_loop_hook();
 #endif
-			if (cpu_wait)
+
+			if (cpu_wait) {
+				/* Don't trace irqs off for idle */
+				stop_critical_timings();
 				(*cpu_wait)();
+				start_critical_timings();
+			}
 		}
 #ifdef CONFIG_HOTPLUG_CPU
 		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 054861c..c51b95f 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -493,36 +493,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_setfpregs(child, (__u32 __user *) data);
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL) {
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		else {
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GET_THREAD_AREA:
 		ret = put_user(task_thread_info(child)->tp_value,
 				(unsigned long __user *) data);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 364f066..26f9b9a 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -23,12 +23,10 @@
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
-#include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 66b5a48..a4facee 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -181,7 +181,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_exit
 	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_semget
 	PTR	sys_semop
 	PTR	sys_n32_semctl
@@ -385,7 +385,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_fchmodat
 	PTR	sys_faccessat
 	PTR	compat_sys_pselect6
-	PTR	sys_ppoll			/* 6265 */
+	PTR	compat_sys_ppoll		/* 6265 */
 	PTR	sys_unshare
 	PTR	sys_splice
 	PTR	sys_sync_file_range
@@ -419,4 +419,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
+	PTR     sys_getdents
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 515f9ea..813689e 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -325,7 +325,7 @@ sys_call_table:
 	PTR	sys32_sigreturn
 	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
-	PTR	sys_32_newuname
+	PTR	sys_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
 	PTR	compat_sys_adjtimex
 	PTR	sys_mprotect			/* 4125 */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index f9513f9..85aef3f 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -569,27 +569,6 @@ void __init setup_arch(char **cmdline_p)
 	plat_smp_setup();
 }
 
-static int __init fpu_disable(char *s)
-{
-	int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		cpu_data[i].options &= ~MIPS_CPU_FPU;
-
-	return 1;
-}
-
-__setup("nofpu", fpu_disable);
-
-static int __init dsp_disable(char *s)
-{
-	cpu_data[0].ases &= ~MIPS_ASE_DSP;
-
-	return 1;
-}
-
-__setup("nodsp", dsp_disable);
-
 unsigned long kernelsp[NR_CPUS];
 unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
 
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 6c8e8c4..10263b4 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -26,11 +26,6 @@
  */
 extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 				 size_t frame_size);
-/*
- * install trampoline code to get back from the sig handler
- */
-extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall);
-
 /* Check and clear pending FPU exceptions in saved CSR */
 extern int fpcsr_pending(unsigned int __user *fpcsr);
 
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index d0c68b5..2099d5a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -32,6 +32,7 @@
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
+#include <asm/vdso.h>
 
 #include "signal-common.h"
 
@@ -44,47 +45,20 @@ extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc);
 extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
 extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
 
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
 struct sigframe {
 	u32 sf_ass[4];		/* argument save space for o32 */
-	u32 sf_code[2];		/* signal trampoline */
+	u32 sf_pad[2];		/* Was: signal trampoline */
 	struct sigcontext sf_sc;
 	sigset_t sf_mask;
 };
 
 struct rt_sigframe {
 	u32 rs_ass[4];		/* argument save space for o32 */
-	u32 rs_code[2];		/* signal trampoline */
+	u32 rs_pad[2];		/* Was: signal trampoline */
 	struct siginfo rs_info;
 	struct ucontext rs_uc;
 };
 
-#else
-
-struct sigframe {
-	u32 sf_ass[4];			/* argument save space for o32 */
-	u32 sf_pad[2];
-	struct sigcontext sf_sc;	/* hw context */
-	sigset_t sf_mask;
-	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
-};
-
-struct rt_sigframe {
-	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_pad[2];
-	struct siginfo rs_info;
-	struct ucontext rs_uc;
-	u32 rs_code[8] ____cacheline_aligned;	/* signal trampoline */
-};
-
-#endif
-
 /*
  * Helper routines
  */
@@ -266,32 +240,6 @@ void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
 }
 
-int install_sigtramp(unsigned int __user *tramp, unsigned int syscall)
-{
-	int err;
-
-	/*
-	 * Set up the return code ...
-	 *
-	 *         li      v0, __NR__foo_sigreturn
-	 *         syscall
-	 */
-
-	err = __put_user(0x24020000 + syscall, tramp + 0);
-	err |= __put_user(0x0000000c         , tramp + 1);
-	if (ICACHE_REFILLS_WORKAROUND_WAR) {
-		err |= __put_user(0, tramp + 2);
-		err |= __put_user(0, tramp + 3);
-		err |= __put_user(0, tramp + 4);
-		err |= __put_user(0, tramp + 5);
-		err |= __put_user(0, tramp + 6);
-		err |= __put_user(0, tramp + 7);
-	}
-	flush_cache_sigtramp((unsigned long) tramp);
-
-	return err;
-}
-
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -484,8 +432,8 @@ badframe:
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
-	int signr, sigset_t *set)
+static int setup_frame(void *sig_return, struct k_sigaction *ka,
+		       struct pt_regs *regs, int signr, sigset_t *set)
 {
 	struct sigframe __user *frame;
 	int err = 0;
@@ -494,8 +442,6 @@ static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	err |= install_sigtramp(frame->sf_code, __NR_sigreturn);
-
 	err |= setup_sigcontext(regs, &frame->sf_sc);
 	err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
 	if (err)
@@ -515,7 +461,7 @@ static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	regs->regs[ 5] = 0;
 	regs->regs[ 6] = (unsigned long) &frame->sf_sc;
 	regs->regs[29] = (unsigned long) frame;
-	regs->regs[31] = (unsigned long) frame->sf_code;
+	regs->regs[31] = (unsigned long) sig_return;
 	regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
 
 	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -529,8 +475,9 @@ give_sigsegv:
 }
 #endif
 
-static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
-	int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame(void *sig_return, struct k_sigaction *ka,
+			  struct pt_regs *regs,	int signr, sigset_t *set,
+			  siginfo_t *info)
 {
 	struct rt_sigframe __user *frame;
 	int err = 0;
@@ -539,8 +486,6 @@ static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	err |= install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
-
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
 
@@ -573,7 +518,7 @@ static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	regs->regs[ 5] = (unsigned long) &frame->rs_info;
 	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
 	regs->regs[29] = (unsigned long) frame;
-	regs->regs[31] = (unsigned long) frame->rs_code;
+	regs->regs[31] = (unsigned long) sig_return;
 	regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
 
 	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -590,8 +535,11 @@ give_sigsegv:
 struct mips_abi mips_abi = {
 #ifdef CONFIG_TRAD_SIGNALS
 	.setup_frame	= setup_frame,
+	.signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
 #endif
 	.setup_rt_frame	= setup_rt_frame,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, rt_signal_trampoline),
 	.restart	= __NR_restart_syscall
 };
 
@@ -599,6 +547,8 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
 {
 	int ret;
+	struct mips_abi *abi = current->thread.abi;
+	void *vdso = current->mm->context.vdso;
 
 	switch(regs->regs[0]) {
 	case ERESTART_RESTARTBLOCK:
@@ -619,9 +569,11 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	regs->regs[0] = 0;		/* Don't deal with this again.  */
 
 	if (sig_uses_siginfo(ka))
-		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
+		ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+					  ka, regs, sig, oldset, info);
 	else
-		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
+		ret = abi->setup_frame(vdso + abi->signal_return_offset,
+				       ka, regs, sig, oldset);
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 03abaf0..a0ed0e0 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -32,6 +32,7 @@
 #include <asm/system.h>
 #include <asm/fpu.h>
 #include <asm/war.h>
+#include <asm/vdso.h>
 
 #include "signal-common.h"
 
@@ -47,8 +48,6 @@ extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user
 /*
  * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
  */
-#define __NR_O32_sigreturn		4119
-#define __NR_O32_rt_sigreturn		4193
 #define __NR_O32_restart_syscall        4253
 
 /* 32-bit compatibility types */
@@ -77,47 +76,20 @@ struct ucontext32 {
 	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
 };
 
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
 struct sigframe32 {
 	u32 sf_ass[4];		/* argument save space for o32 */
-	u32 sf_code[2];		/* signal trampoline */
+	u32 sf_pad[2];		/* Was: signal trampoline */
 	struct sigcontext32 sf_sc;
 	compat_sigset_t sf_mask;
 };
 
 struct rt_sigframe32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2];			/* signal trampoline */
+	u32 rs_pad[2];			/* Was: signal trampoline */
 	compat_siginfo_t rs_info;
 	struct ucontext32 rs_uc;
 };
 
-#else  /* ICACHE_REFILLS_WORKAROUND_WAR */
-
-struct sigframe32 {
-	u32 sf_ass[4];			/* argument save space for o32 */
-	u32 sf_pad[2];
-	struct sigcontext32 sf_sc;	/* hw context */
-	compat_sigset_t sf_mask;
-	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
-};
-
-struct rt_sigframe32 {
-	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_pad[2];
-	compat_siginfo_t rs_info;
-	struct ucontext32 rs_uc;
-	u32 rs_code[8] __attribute__((aligned(32)));	/* signal trampoline */
-};
-
-#endif	/* !ICACHE_REFILLS_WORKAROUND_WAR */
-
 /*
  * sigcontext handlers
  */
@@ -598,8 +570,8 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
-	int signr, sigset_t *set)
+static int setup_frame_32(void *sig_return, struct k_sigaction *ka,
+			  struct pt_regs *regs, int signr, sigset_t *set)
 {
 	struct sigframe32 __user *frame;
 	int err = 0;
@@ -608,8 +580,6 @@ static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn);
-
 	err |= setup_sigcontext32(regs, &frame->sf_sc);
 	err |= __copy_conv_sigset_to_user(&frame->sf_mask, set);
 
@@ -630,7 +600,7 @@ static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	regs->regs[ 5] = 0;
 	regs->regs[ 6] = (unsigned long) &frame->sf_sc;
 	regs->regs[29] = (unsigned long) frame;
-	regs->regs[31] = (unsigned long) frame->sf_code;
+	regs->regs[31] = (unsigned long) sig_return;
 	regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
 
 	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -644,8 +614,9 @@ give_sigsegv:
 	return -EFAULT;
 }
 
-static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
-	int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame_32(void *sig_return, struct k_sigaction *ka,
+			     struct pt_regs *regs, int signr, sigset_t *set,
+			     siginfo_t *info)
 {
 	struct rt_sigframe32 __user *frame;
 	int err = 0;
@@ -655,8 +626,6 @@ static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	err |= install_sigtramp(frame->rs_code, __NR_O32_rt_sigreturn);
-
 	/* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */
 	err |= copy_siginfo_to_user32(&frame->rs_info, info);
 
@@ -690,7 +659,7 @@ static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	regs->regs[ 5] = (unsigned long) &frame->rs_info;
 	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
 	regs->regs[29] = (unsigned long) frame;
-	regs->regs[31] = (unsigned long) frame->rs_code;
+	regs->regs[31] = (unsigned long) sig_return;
 	regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
 
 	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -709,7 +678,11 @@ give_sigsegv:
  */
 struct mips_abi mips_abi_32 = {
 	.setup_frame	= setup_frame_32,
+	.signal_return_offset =
+		offsetof(struct mips_vdso, o32_signal_trampoline),
 	.setup_rt_frame	= setup_rt_frame_32,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, o32_rt_signal_trampoline),
 	.restart	= __NR_O32_restart_syscall
 };
 
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index bb277e8..2c5df81 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -39,13 +39,13 @@
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
+#include <asm/vdso.h>
 
 #include "signal-common.h"
 
 /*
  * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
  */
-#define __NR_N32_rt_sigreturn		6211
 #define __NR_N32_restart_syscall	6214
 
 extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
@@ -67,27 +67,13 @@ struct ucontextn32 {
 	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
 };
 
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
-struct rt_sigframe_n32 {
-	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_code[2];			/* signal trampoline */
-	struct compat_siginfo rs_info;
-	struct ucontextn32 rs_uc;
-};
-
-#else  /* ICACHE_REFILLS_WORKAROUND_WAR */
-
 struct rt_sigframe_n32 {
 	u32 rs_ass[4];			/* argument save space for o32 */
-	u32 rs_pad[2];
+	u32 rs_pad[2];			/* Was: signal trampoline */
 	struct compat_siginfo rs_info;
 	struct ucontextn32 rs_uc;
-	u32 rs_code[8] ____cacheline_aligned;		/* signal trampoline */
 };
 
-#endif	/* !ICACHE_REFILLS_WORKAROUND_WAR */
-
 extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
 
 asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
@@ -173,7 +159,7 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-static int setup_rt_frame_n32(struct k_sigaction * ka,
+static int setup_rt_frame_n32(void *sig_return, struct k_sigaction *ka,
 	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe_n32 __user *frame;
@@ -184,8 +170,6 @@ static int setup_rt_frame_n32(struct k_sigaction * ka,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
 		goto give_sigsegv;
 
-	install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
-
 	/* Create siginfo.  */
 	err |= copy_siginfo_to_user32(&frame->rs_info, info);
 
@@ -219,7 +203,7 @@ static int setup_rt_frame_n32(struct k_sigaction * ka,
 	regs->regs[ 5] = (unsigned long) &frame->rs_info;
 	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
 	regs->regs[29] = (unsigned long) frame;
-	regs->regs[31] = (unsigned long) frame->rs_code;
+	regs->regs[31] = (unsigned long) sig_return;
 	regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
 
 	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
@@ -235,5 +219,7 @@ give_sigsegv:
 
 struct mips_abi mips_abi_n32 = {
 	.setup_rt_frame	= setup_rt_frame_n32,
+	.rt_signal_return_offset =
+		offsetof(struct mips_vdso, n32_rt_signal_trampoline),
 	.restart	= __NR_N32_restart_syscall
 };
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 23499b5..a95dea5 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -26,6 +26,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/ftrace.h>
+#include <linux/slab.h>
 
 #include <asm/cpu.h>
 #include <asm/processor.h>
@@ -181,7 +182,7 @@ static int vpemask[2][8] = {
 	{0, 0, 0, 0, 0, 0, 0, 1}
 };
 int tcnoprog[NR_CPUS];
-static atomic_t idle_hook_initialized = {0};
+static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
 static int clock_hang_reported[NR_CPUS];
 
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c
new file mode 100644
index 0000000..da61134
--- /dev/null
+++ b/arch/mips/kernel/spinlock_test.c
@@ -0,0 +1,141 @@
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/hrtimer.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+
+static int ss_get(void *data, u64 *val)
+{
+	ktime_t start, finish;
+	int loops;
+	int cont;
+	DEFINE_RAW_SPINLOCK(ss_spin);
+
+	loops = 1000000;
+	cont = 1;
+
+	start = ktime_get();
+
+	while (cont) {
+		raw_spin_lock(&ss_spin);
+		loops--;
+		if (loops == 0)
+			cont = 0;
+		raw_spin_unlock(&ss_spin);
+	}
+
+	finish = ktime_get();
+
+	*val = ktime_us_delta(finish, start);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ss, ss_get, NULL, "%llu\n");
+
+
+
+struct spin_multi_state {
+	raw_spinlock_t lock;
+	atomic_t start_wait;
+	atomic_t enter_wait;
+	atomic_t exit_wait;
+	int loops;
+};
+
+struct spin_multi_per_thread {
+	struct spin_multi_state *state;
+	ktime_t start;
+};
+
+static int multi_other(void *data)
+{
+	int loops;
+	int cont;
+	struct spin_multi_per_thread *pt = data;
+	struct spin_multi_state *s = pt->state;
+
+	loops = s->loops;
+	cont = 1;
+
+	atomic_dec(&s->enter_wait);
+
+	while (atomic_read(&s->enter_wait))
+		; /* spin */
+
+	pt->start = ktime_get();
+
+	atomic_dec(&s->start_wait);
+
+	while (atomic_read(&s->start_wait))
+		; /* spin */
+
+	while (cont) {
+		raw_spin_lock(&s->lock);
+		loops--;
+		if (loops == 0)
+			cont = 0;
+		raw_spin_unlock(&s->lock);
+	}
+
+	atomic_dec(&s->exit_wait);
+	while (atomic_read(&s->exit_wait))
+		; /* spin */
+	return 0;
+}
+
+static int multi_get(void *data, u64 *val)
+{
+	ktime_t finish;
+	struct spin_multi_state ms;
+	struct spin_multi_per_thread t1, t2;
+
+	ms.lock = __RAW_SPIN_LOCK_UNLOCKED("multi_get");
+	ms.loops = 1000000;
+
+	atomic_set(&ms.start_wait, 2);
+	atomic_set(&ms.enter_wait, 2);
+	atomic_set(&ms.exit_wait, 2);
+	t1.state = &ms;
+	t2.state = &ms;
+
+	kthread_run(multi_other, &t2, "multi_get");
+
+	multi_other(&t1);
+
+	finish = ktime_get();
+
+	*val = ktime_us_delta(finish, t1.start);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
+
+
+extern struct dentry *mips_debugfs_dir;
+static int __init spinlock_test(void)
+{
+	struct dentry *d;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+
+	d = debugfs_create_file("spin_single", S_IRUGO,
+				mips_debugfs_dir, NULL,
+				&fops_ss);
+	if (!d)
+		return -ENOMEM;
+
+	d = debugfs_create_file("spin_multi", S_IRUGO,
+				mips_debugfs_dir, NULL,
+				&fops_multi);
+	if (!d)
+		return -ENOMEM;
+
+	return 0;
+}
+device_initcall(spinlock_test);
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3f7f466..dd81b0f 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -19,7 +19,6 @@
 #include <linux/string.h>
 #include <linux/syscalls.h>
 #include <linux/file.h>
-#include <linux/slab.h>
 #include <linux/utsname.h>
 #include <linux/unistd.h>
 #include <linux/sem.h>
@@ -29,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 #include <asm/asm.h>
 #include <asm/branch.h>
@@ -79,7 +79,11 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	int do_color_align;
 	unsigned long task_size;
 
-	task_size = STACK_TOP;
+#ifdef CONFIG_32BIT
+	task_size = TASK_SIZE;
+#else /* Must be CONFIG_64BIT*/
+	task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
+#endif
 
 	if (len > task_size)
 		return -ENOMEM;
@@ -215,48 +219,6 @@ out:
 	return error;
 }
 
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
-{
-	if (name && !copy_to_user(name, utsname(), sizeof (*name)))
-		return 0;
-	return -EFAULT;
-}
-
-/*
- * Compacrapability ...
- */
-SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error -= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->release + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error -= __put_user(0, name->version + __OLD_UTS_LEN);
-	error -= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error = __put_user(0, name->machine + __OLD_UTS_LEN);
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 {
 	struct thread_info *ti = task_thread_info(current);
@@ -407,94 +369,6 @@ _sys_sysmips(nabi_no_regargs struct pt_regs regs)
 }
 
 /*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
-	unsigned long, third, void __user *, ptr, long, fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-		                      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user *__user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					  second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				  (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			unsigned long raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (unsigned long __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-				        (unsigned long *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
  * No implemented yet ...
  */
 SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 338dfe8..8527808 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -26,6 +26,7 @@
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
 #include <linux/notifier.h>
+#include <linux/kdb.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -50,6 +51,7 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 #include <asm/irq.h>
+#include <asm/uasm.h>
 
 extern void check_wait(void);
 extern asmlinkage void r4k_wait(void);
@@ -184,6 +186,11 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 			regs.regs[29] = task->thread.reg29;
 			regs.regs[31] = 0;
 			regs.cp0_epc = task->thread.reg31;
+#ifdef CONFIG_KGDB_KDB
+		} else if (atomic_read(&kgdb_active) != -1 &&
+			   kdb_current_regs) {
+			memcpy(&regs, kdb_current_regs, sizeof(regs));
+#endif /* CONFIG_KGDB_KDB */
 		} else {
 			prepare_frametrace(&regs);
 		}
@@ -351,19 +358,26 @@ void show_registers(const struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-void __noreturn die(const char * str, const struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
+	int sig = SIGSEGV;
 #ifdef CONFIG_MIPS_MT_SMTC
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
+	notify_die(DIE_OOPS, str, (struct pt_regs *)regs, SIGSEGV, 0, 0);
+
 	console_verbose();
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 #ifdef CONFIG_MIPS_MT_SMTC
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
+
+	if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
+
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);
@@ -378,7 +392,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 		panic("Fatal exception");
 	}
 
-	do_exit(SIGSEGV);
+	do_exit(sig);
 }
 
 extern struct exception_table_entry __start___dbe_table[];
@@ -698,6 +712,11 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
 		return;
 
@@ -848,7 +867,7 @@ static void mt_ase_fp_affinity(void)
 				= current->cpus_allowed;
 			cpus_and(tmask, current->cpus_allowed,
 				mt_fpu_cpumask);
-			set_cpus_allowed(current, tmask);
+			set_cpus_allowed_ptr(current, &tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
 	}
@@ -957,7 +976,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 	case 2:
 		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
-		break;
+		return;
 
 	case 3:
 		break;
@@ -1271,21 +1290,25 @@ unsigned long ebase;
 unsigned long exception_handlers[32];
 unsigned long vi_handlers[64];
 
-/*
- * As a side effect of the way this is implemented we're limited
- * to interrupt handlers in the address range from
- * KSEG0 <= x < KSEG0 + 256mb on the Nevada.  Oh well ...
- */
-void *set_except_vector(int n, void *addr)
+void __init *set_except_vector(int n, void *addr)
 {
 	unsigned long handler = (unsigned long) addr;
 	unsigned long old_handler = exception_handlers[n];
 
 	exception_handlers[n] = handler;
 	if (n == 0 && cpu_has_divec) {
-		*(u32 *)(ebase + 0x200) = 0x08000000 |
-					  (0x03ffffff & (handler >> 2));
-		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
+		unsigned long jump_mask = ~((1 << 28) - 1);
+		u32 *buf = (u32 *)(ebase + 0x200);
+		unsigned int k0 = 26;
+		if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
+			uasm_i_j(&buf, handler & ~jump_mask);
+			uasm_i_nop(&buf);
+		} else {
+			UASM_i_LA(&buf, k0, handler);
+			uasm_i_jr(&buf, k0);
+			uasm_i_nop(&buf);
+		}
+		local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
 	}
 	return (void *)old_handler;
 }
@@ -1501,6 +1524,7 @@ void __cpuinit per_cpu_trap_init(void)
 			cp0_perfcount_irq = -1;
 	} else {
 		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
+		cp0_compare_irq_shift = cp0_compare_irq;
 		cp0_perfcount_irq = -1;
 	}
 
@@ -1551,12 +1575,7 @@ static char panic_null_cerr[] __cpuinitdata =
 void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long size)
 {
-#ifdef CONFIG_32BIT
-	unsigned long uncached_ebase = KSEG1ADDR(ebase);
-#endif
-#ifdef CONFIG_64BIT
-	unsigned long uncached_ebase = TO_UNCAC(ebase);
-#endif
+	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
 
 	if (!addr)
 		panic(panic_null_cerr);
@@ -1593,7 +1612,7 @@ void __init trap_init(void)
 		ebase = (unsigned long)
 			__alloc_bootmem(size, 1 << fls(size), 0);
 	} else {
-		ebase = CAC_BASE;
+		ebase = CKSEG0;
 		if (cpu_has_mips_r2)
 			ebase += (read_c0_ebase() & 0x3ffff000);
 	}
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
new file mode 100644
index 0000000..e5cdfd6
--- /dev/null
+++ b/arch/mips/kernel/vdso.c
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/unistd.h>
+
+#include <asm/vdso.h>
+#include <asm/uasm.h>
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_O32_sigreturn		4119
+#define __NR_O32_rt_sigreturn		4193
+#define __NR_N32_rt_sigreturn		6211
+
+static struct page *vdso_page;
+
+static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+{
+	uasm_i_addiu(&tramp, 2, 0, sigreturn);	/* li v0, sigreturn */
+	uasm_i_syscall(&tramp, 0);
+}
+
+static int __init init_vdso(void)
+{
+	struct mips_vdso *vdso;
+
+	vdso_page = alloc_page(GFP_KERNEL);
+	if (!vdso_page)
+		panic("Cannot allocate vdso");
+
+	vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
+	if (!vdso)
+		panic("Cannot map vdso");
+	clear_page(vdso);
+
+	install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
+#ifdef CONFIG_32BIT
+	install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
+#else
+	install_trampoline(vdso->n32_rt_signal_trampoline,
+			   __NR_N32_rt_sigreturn);
+	install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
+	install_trampoline(vdso->o32_rt_signal_trampoline,
+			   __NR_O32_rt_sigreturn);
+#endif
+
+	vunmap(vdso);
+
+	return 0;
+}
+subsys_initcall(init_vdso);
+
+static unsigned long vdso_addr(unsigned long start)
+{
+	return STACK_TOP;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	int ret;
+	unsigned long addr;
+	struct mm_struct *mm = current->mm;
+
+	down_write(&mm->mmap_sem);
+
+	addr = vdso_addr(mm->start_stack);
+
+	addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+				      VM_READ|VM_EXEC|
+				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+				      VM_ALWAYSDUMP,
+				      &vdso_page);
+
+	if (ret)
+		goto up_fail;
+
+	mm->context.vdso = (void *)addr;
+
+up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+		return "[vdso]";
+	return NULL;
+}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 6047752..2bd2151 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -38,7 +38,6 @@
 #include <linux/vmalloc.h>
 #include <linux/elf.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/moduleloader.h>
 #include <linux/interrupt.h>
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
index 91df553..2f07577 100644
--- a/arch/mips/lasat/picvue.h
+++ b/arch/mips/lasat/picvue.h
@@ -42,4 +42,3 @@ void pvc_move(u8 cmd);
 
 void pvc_clear(void);
 void pvc_home(void);
-
diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c
index 6b3b1de9..5995969 100644
--- a/arch/mips/lib/delay.c
+++ b/arch/mips/lib/delay.c
@@ -41,7 +41,7 @@ EXPORT_SYMBOL(__delay);
 
 void __udelay(unsigned long us)
 {
-	unsigned int lpj = current_cpu_data.udelay_val;
+	unsigned int lpj = raw_current_cpu_data.udelay_val;
 
 	__delay((us * 0x000010c7ull * HZ * lpj) >> 32);
 }
@@ -49,7 +49,7 @@ EXPORT_SYMBOL(__udelay);
 
 void __ndelay(unsigned long ns)
 {
-	unsigned int lpj = current_cpu_data.udelay_val;
+	unsigned int lpj = raw_current_cpu_data.udelay_val;
 
 	__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
 }
diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h
index 3f19d1c..05909d58 100644
--- a/arch/mips/lib/libgcc.h
+++ b/arch/mips/lib/libgcc.h
@@ -17,8 +17,7 @@ struct DWstruct {
 #error I feel sick.
 #endif
 
-typedef union
-{
+typedef union {
 	struct DWstruct s;
 	long long ll;
 } DWunion;
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 3df1967..c97ca69 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -23,6 +23,7 @@ config LEMOTE_FULOONG2E
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
+	select LOONGSON_MC146818
 	help
 	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
@@ -51,6 +52,7 @@ config LEMOTE_MACH2F
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
 	help
 	  Lemote Loongson 2F family machines utilize the 2F revision of
 	  Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@ config LOONGSON_UART_BASE
 	bool
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 7668c4d..e526488 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -4,6 +4,7 @@
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     pci.o bonito-irq.o mem.o machtype.o platform.o
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 
 #
 # Serial port support
@@ -11,6 +12,7 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_SERIAL_8250) += serial.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
 # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
index 7ad47f2..1a06def 100644
--- a/arch/mips/loongson/common/cmdline.c
+++ b/arch/mips/loongson/common/cmdline.c
@@ -10,7 +10,7 @@
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -21,12 +21,11 @@
 
 #include <loongson.h>
 
-int prom_argc;
-/* pmon passes arguments in 32bit pointers */
-int *_prom_argv;
-
 void __init prom_init_cmdline(void)
 {
+	int prom_argc;
+	/* pmon passes arguments in 32bit pointers */
+	int *_prom_argv;
 	int i;
 	long l;
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c
index b49485f..b3fd5ea 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_acc.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
index 74f9c59..5b5cbba 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -49,6 +49,8 @@ void pci_ehci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_EHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
index 3f61594..681d129 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ide.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -51,6 +51,7 @@ void pci_ide_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_IDE_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if (value & 0x01) {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
 			lo = (value & 0xfffffff0) | 0x1;
 			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
 
@@ -65,19 +66,30 @@ void pci_ide_write_reg(int reg, u32 value)
 			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
 			lo |= 0x01;
 			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+			lo = value;
 			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		}
 		break;
 	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
 		break;
 	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
 		break;
 	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
 		break;
 	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
 		break;
 	default:
@@ -167,6 +179,7 @@ u32 pci_ide_read_reg(int reg)
 	case PCI_IDE_ETC_REG:
 		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
 		conf_data = lo;
+		break;
 	case PCI_IDE_PM_REG:
 		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
 		conf_data = lo;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
index b6f17f5..4d9f65a 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_isa.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -61,7 +61,7 @@ static void divil_lbar_enable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
@@ -76,7 +76,7 @@ static void divil_lbar_disable(void)
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
index 6cb44db..8c807c9 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -5,7 +5,7 @@
  * Author: Yanhua, yanh@lemote.com
  *
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu zhangjin, wuzj@lemote.com
+ * Author: Wu zhangjin, wuzhangjin@gmail.com
  *
  * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
  *
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
index 8fdb02b..bdedf51 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -49,6 +49,8 @@ void pci_ohci_write_reg(int reg, u32 value)
 			lo |= SOFT_BAR_OHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c
index e23f3d7..6dfeab1 100644
--- a/arch/mips/loongson/common/cs5536/cs5536_pci.c
+++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c
@@ -5,7 +5,7 @@
  * Author : jlliu, liujl@lemote.com
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
index 23e7a8f..a71736f 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson/common/early_printk.c
@@ -2,7 +2,7 @@
  *
  *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
  *  Copyright (c) 2009 Lemote Inc.
- *  Author: Wu Zhangjin, wuzj@lemote.com
+ *  Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index 196d947..ae4cff9 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -9,8 +9,8 @@
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,13 +23,10 @@
 
 #include <loongson.h>
 
-unsigned long bus_clock, cpu_clock_freq;
+unsigned long cpu_clock_freq;
 EXPORT_SYMBOL(cpu_clock_freq);
 unsigned long memsize, highmemsize;
 
-/* pmon passes arguments in 32bit pointers */
-int *_prom_envp;
-
 #define parse_even_earlier(res, option, p)				\
 do {									\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
@@ -39,6 +36,10 @@ do {									\
 
 void __init prom_init_env(void)
 {
+	/* pmon passes arguments in 32bit pointers */
+	int *_prom_envp;
+	unsigned long bus_clock;
+	unsigned int processor_id;
 	long l;
 
 	/* firmware arguments are initialized in head.S */
@@ -55,6 +56,22 @@ void __init prom_init_env(void)
 	}
 	if (memsize == 0)
 		memsize = 256;
+	if (bus_clock == 0)
+		bus_clock = 66000000;
+	if (cpu_clock_freq == 0) {
+		processor_id = (&current_cpu_data)->processor_id;
+		switch (processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON2E:
+			cpu_clock_freq = 533080000;
+			break;
+		case PRID_REV_LOONGSON2F:
+			cpu_clock_freq = 797000000;
+			break;
+		default:
+			cpu_clock_freq = 100000000;
+			break;
+		}
+	}
 
 	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
 		bus_clock, cpu_clock_freq, memsize, highmemsize);
diff --git a/arch/mips/loongson/common/gpio.c b/arch/mips/loongson/common/gpio.c
new file mode 100644
index 0000000..e8a0ffa
--- /dev/null
+++ b/arch/mips/loongson/common/gpio.c
@@ -0,0 +1,139 @@
+/*
+ *  STLS2F GPIO Support
+ *
+ *  Copyright (c) 2008 Richard Liu,  STMicroelectronics  <richard.liu@st.com>
+ *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <asm/types.h>
+#include <loongson.h>
+#include <linux/gpio.h>
+
+#define STLS2F_N_GPIO		4
+#define STLS2F_GPIO_IN_OFFSET	16
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+int gpio_get_value(unsigned gpio)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return __gpio_get_value(gpio);
+
+	mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	spin_unlock(&gpio_lock);
+
+	return ((val & mask) != 0);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int state)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO) {
+		__gpio_set_value(gpio, state);
+		return ;
+	}
+
+	mask = 1 << gpio;
+
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	if (state)
+		val |= mask;
+	else
+		val &= (~mask);
+	LOONGSON_GPIODATA = val;
+	spin_unlock(&gpio_lock);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_cansleep(unsigned gpio)
+{
+	if (gpio < STLS2F_N_GPIO)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
+EXPORT_SYMBOL(gpio_cansleep);
+
+static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp |= mask;
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+		unsigned gpio, int level)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	gpio_set_value(gpio, level);
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp &= (~mask);
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static void ls2f_gpio_set_value(struct gpio_chip *chip,
+		unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static struct gpio_chip ls2f_chip = {
+	.label                  = "ls2f",
+	.direction_input        = ls2f_gpio_direction_input,
+	.get                    = ls2f_gpio_get_value,
+	.direction_output       = ls2f_gpio_direction_output,
+	.set                    = ls2f_gpio_set_value,
+	.base                   = 0,
+	.ngpio                  = STLS2F_N_GPIO,
+};
+
+static int __init ls2f_gpio_setup(void)
+{
+	return gpiochip_add(&ls2f_chip);
+}
+arch_initcall(ls2f_gpio_setup);
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index a2abd93..19d3415 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 0ed52b3..81fbe6b 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -1,6 +1,6 @@
 /*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
  *
@@ -24,7 +24,7 @@ static const char *system_types[] = {
 	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
 	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
 	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
-	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_DEXXON_GDIUM2F10]         "dexxon-gdium-2f",
 	[MACH_LEMOTE_NAS]		"lemote-nas-2f",
 	[MACH_LEMOTE_LL2F]              "lemote-lynloong-2f",
 	[MACH_LOONGSON_END]             NULL,
@@ -35,6 +35,10 @@ const char *get_system_type(void)
 	return system_types[mips_machtype];
 }
 
+void __weak __init mach_prom_init_machtype(void)
+{
+}
+
 void __init prom_init_machtype(void)
 {
 	char *p, str[MACHTYPE_LEN];
@@ -43,8 +47,10 @@ void __init prom_init_machtype(void)
 	mips_machtype = LOONGSON_MACHTYPE;
 
 	p = strstr(arcs_cmdline, "machtype=");
-	if (!p)
+	if (!p) {
+		mach_prom_init_machtype();
 		return;
+	}
 	p += strlen("machtype=");
 	strncpy(str, p, MACHTYPE_LEN);
 	p = strstr(str, " ");
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index ceacd09..30eba60 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -16,10 +16,11 @@
 
 void __init prom_init_memory(void)
 {
-    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+	add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+				20), BOOT_MEM_RESERVED);
 
-    add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
-			    20), BOOT_MEM_RESERVED);
 #ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
 	{
 		int bit;
@@ -74,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 	unsigned long end = offset + size;
 
 	if (__uncached_access(file, offset)) {
-		if (((uca_start && offset) >= uca_start) &&
+		if (uca_start && (offset >= uca_start) &&
 		    (end <= uca_end))
 			return __pgprot((pgprot_val(vma_prot) &
 					 ~_CACHE_MASK) |
@@ -95,7 +96,7 @@ static int __init find_vga_mem_init(void)
 		return 0;
 
 	for_each_pci_dev(dev) {
-		if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
 				r = &dev->resource[idx];
 				if (!r->start && r->end)
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c
index be81777..ed007a2 100644
--- a/arch/mips/loongson/common/platform.c
+++ b/arch/mips/loongson/common/platform.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c
index b625fec..6c1fd90 100644
--- a/arch/mips/loongson/common/pm.c
+++ b/arch/mips/loongson/common/pm.c
@@ -2,7 +2,7 @@
  * loongson-specific suspend support
  *
  *  Copyright (C) 2009 Lemote Inc.
- *  Author: Wu Zhangjin <wuzj@lemote.com>
+ *  Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index d57f171..9e10d62 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -6,8 +6,8 @@
  *
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Zhangjin Wu, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Zhangjin Wu, wuzhangjin@gmail.com
  */
 #include <linux/init.h>
 #include <linux/pm.h>
@@ -16,27 +16,53 @@
 
 #include <loongson.h>
 
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+	void (*func)(void);
+
+	func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+	__asm__ __volatile__(
+	"       .set    noat                                            \n"
+	"       jr      %[func]                                         \n"
+	"       .set    at                                              \n"
+	: /* No outputs */
+	: [func] "r" (func));
+#endif
+}
+
 static void loongson_restart(char *command)
 {
 	/* do preparation for reboot */
 	mach_prepare_reboot();
 
 	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+	loongson_reboot();
 }
 
-static void loongson_halt(void)
+static void loongson_poweroff(void)
 {
 	mach_prepare_shutdown();
-	while (1)
-		;
+	unreachable();
+}
+
+static void loongson_halt(void)
+{
+	pr_notice("\n\n** You can safely turn off the power now **\n\n");
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
 }
 
 static int __init mips_reboot_setup(void)
 {
 	_machine_restart = loongson_restart;
 	_machine_halt = loongson_halt;
-	pm_power_off = loongson_halt;
+	pm_power_off = loongson_poweroff;
 
 	return 0;
 }
diff --git a/arch/mips/loongson/common/rtc.c b/arch/mips/loongson/common/rtc.c
new file mode 100644
index 0000000..a90d87c
--- /dev/null
+++ b/arch/mips/loongson/common/rtc.c
@@ -0,0 +1,43 @@
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
index 23b66a5..7580873 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson/common/serial.c
@@ -7,7 +7,7 @@
  *
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Yan hua (yanhua@lemote.com)
- * Author: Wu Zhangjin (wuzj@lemote.com)
+ * Author: Wu Zhangjin (wuzhangjin@gmail.com)
  */
 
 #include <linux/io.h>
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
index 4cd2aa9..27d826b 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson/common/setup.c
@@ -41,15 +41,12 @@ void __init plat_mem_setup(void)
 	conswitchp = &vga_con;
 
 	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
+		.orig_x			= 0,
+		.orig_y			= 25,
+		.orig_video_cols	= 80,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= VIDEO_TYPE_VGAC,
+		.orig_video_points	= 16,
 	};
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 35f0b66..9fdd01f 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -2,8 +2,8 @@
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
index 78ff66a..d69ea54 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson/common/uart_base.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
index fc16c67..bc39ec6 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -1,8 +1,8 @@
 /* Board-specific reboot/shutdown routines
  * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile
index 4d84b27..8699a53 100644
--- a/arch/mips/loongson/lemote-2f/Makefile
+++ b/arch/mips/loongson/lemote-2f/Makefile
@@ -2,7 +2,7 @@
 # Makefile for lemote loongson2f family machines
 #
 
-obj-y += irq.o reset.o ec_kb3310b.o
+obj-y += machtype.o irq.o reset.o ec_kb3310b.o
 
 #
 # Suspend Support
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
index 4d84111..6405724 100644
--- a/arch/mips/loongson/lemote-2f/ec_kb3310b.c
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
@@ -75,6 +75,8 @@ int ec_query_seq(unsigned char cmd)
 		udelay(EC_REG_DELAY);
 	}
 
+	spin_unlock_irqrestore(&port_access_lock, flags);
+
 	if (timeout <= 0) {
 		printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
 		ret = -EINVAL;
@@ -83,8 +85,6 @@ int ec_query_seq(unsigned char cmd)
 			   "(%x/%d)ec issued command %d status : 0x%x\n",
 			   timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
 
-	spin_unlock_irqrestore(&port_access_lock, flags);
-
 	return ret;
 }
 EXPORT_SYMBOL_GPL(ec_query_seq);
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 77d32f9..1d8b4d2 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -38,7 +38,7 @@ int mach_i8259_irq(void)
 	irq = -1;
 
 	if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
-		spin_lock(&i8259A_lock);
+		raw_spin_lock(&i8259A_lock);
 		isr = inb(PIC_MASTER_CMD) &
 			~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
 		if (!isr)
@@ -56,7 +56,7 @@ int mach_i8259_irq(void)
 			if (~inb(PIC_MASTER_ISR) & 0x80)
 				irq = -1;
 		}
-		spin_unlock(&i8259A_lock);
+		raw_spin_unlock(&i8259A_lock);
 	}
 
 	return irq;
@@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-#ifdef CONFIG_OPROFILE
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
 		do_IRQ(LOONGSON2_PERFCNT_IRQ);
 #endif
 		bonito_irqdispatch();
diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson/lemote-2f/machtype.c
new file mode 100644
index 0000000..e860a27
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/machtype.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init mach_prom_init_machtype(void)
+{
+	/* We share the same kernel image file among Lemote 2F family
+	 * of machines, and provide the machtype= kernel command line
+	 * to users to indicate their machine, this command line will
+	 * be passed by the latest PMON automatically. and fortunately,
+	 * up to now, we can get the machine type from the PMON_VER=
+	 * commandline directly except the NAS machine, In the old
+	 * machines, this will help the users a lot.
+	 *
+	 * If no "machtype=" passed, get machine type from "PMON_VER=".
+	 * 	PMON_VER=LM8089		Lemote 8.9'' netbook
+	 * 	         LM8101		Lemote 10.1'' netbook
+	 * 	(The above two netbooks have the same kernel support)
+	 *	         LM6XXX		Lemote FuLoong(2F) box series
+	 *	         LM9XXX		Lemote LynLoong PC series
+	 */
+	if (strstr(arcs_cmdline, "PMON_VER=LM")) {
+		if (strstr(arcs_cmdline, "PMON_VER=LM8"))
+			mips_machtype = MACH_LEMOTE_YL2F89;
+		else if (strstr(arcs_cmdline, "PMON_VER=LM6"))
+			mips_machtype = MACH_LEMOTE_FL2F;
+		else if (strstr(arcs_cmdline, "PMON_VER=LM9"))
+			mips_machtype = MACH_LEMOTE_LL2F;
+		else
+			mips_machtype = MACH_LEMOTE_NAS;
+
+		strcat(arcs_cmdline, " machtype=");
+		strcat(arcs_cmdline, get_system_type());
+		strcat(arcs_cmdline, " ");
+	}
+}
diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c
index d7af2e6..cac4d38 100644
--- a/arch/mips/loongson/lemote-2f/pm.c
+++ b/arch/mips/loongson/lemote-2f/pm.c
@@ -2,7 +2,7 @@
  *  Lemote loongson2f family machines' specific suspend support
  *
  *  Copyright (C) 2009 Lemote Inc.
- *  Author: Wu Zhangjin <wuzj@lemote.com>
+ *  Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
index 51d1a60..36020a0 100644
--- a/arch/mips/loongson/lemote-2f/reset.c
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -3,7 +3,7 @@
  * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
  *
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 8f2f8e9..47842b7 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -78,6 +78,9 @@ DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
 #define FPCREG_RID	0	/* $0  = revision id */
 #define FPCREG_CSR	31	/* $31 = csr */
 
+/* Determine rounding mode from the RM bits of the FCSR */
+#define modeindex(v) ((v) & FPU_CSR_RM)
+
 /* Convert Mips rounding mode (0..3) to IEEE library modes. */
 static const unsigned char ieee_rm[4] = {
 	[FPU_CSR_RN] = IEEE754_RN,
@@ -351,7 +354,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 				value = ctx->fcr31;
-				value = (value & ~0x3) | mips_rm[value & 0x3];
+				value = (value & ~FPU_CSR_RM) |
+					mips_rm[modeindex(value)];
 #ifdef CSRTRACE
 				printk("%p gpr[%d]<-csr=%08x\n",
 					(void *) (xcp->cp0_epc),
@@ -384,10 +388,14 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 					(void *) (xcp->cp0_epc),
 					MIPSInst_RT(ir), value);
 #endif
-				value &= (FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				ctx->fcr31 &= ~(FPU_CSR_FLUSH | FPU_CSR_ALL_E | FPU_CSR_ALL_S | 0x03);
-				/* convert to ieee library modes */
-				ctx->fcr31 |= (value & ~0x3) | ieee_rm[value & 0x3];
+
+				/*
+				 * Don't write reserved bits,
+				 * and convert to ieee library modes
+				 */
+				ctx->fcr31 = (value &
+						~(FPU_CSR_RSVD | FPU_CSR_RM)) |
+						ieee_rm[modeindex(value)];
 			}
 			if ((ctx->fcr31 >> 5) & ctx->fcr31 & FPU_CSR_ALL_E) {
 				return SIGFPE;
@@ -900,7 +908,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754sp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -926,7 +934,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754sp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;
@@ -1074,7 +1082,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754dp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -1100,7 +1108,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754dp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index d9ae1db..b909742 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -78,6 +78,7 @@ ieee754dp ieee754dp_abs(ieee754dp x)
 	DPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
 	}
 
diff --git a/arch/mips/math-emu/ieee754d.c b/arch/mips/math-emu/ieee754d.c
index 7e900f3..a032533 100644
--- a/arch/mips/math-emu/ieee754d.c
+++ b/arch/mips/math-emu/ieee754d.c
@@ -135,4 +135,3 @@ ieee754sp ieee754sp_dump(char *m, ieee754sp x)
 	printk("\n");
 	return x;
 }
-
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 6d2d89f..2f22fd7 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -148,7 +148,6 @@ ieee754dp ieee754dp_format(int sn, int xe, u64 xm)
 
 			switch(ieee754_csr.rm) {
 			case IEEE754_RN:
-				return ieee754dp_zero(sn);
 			case IEEE754_RZ:
 				return ieee754dp_zero(sn);
 			case IEEE754_RU:    /* toward +Infinity */
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index 4635340..a19b721 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -149,7 +149,6 @@ ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
 
 			switch(ieee754_csr.rm) {
 			case IEEE754_RN:
-				return ieee754sp_zero(sn);
 			case IEEE754_RZ:
 				return ieee754sp_zero(sn);
 			case IEEE754_RU:      /* toward +Infinity */
diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c
index 7d8ef89..e02423a 100644
--- a/arch/mips/math-emu/ieee754xcpt.c
+++ b/arch/mips/math-emu/ieee754xcpt.c
@@ -46,4 +46,3 @@ void ieee754_xcpt(struct ieee754xctx *xcp)
 	printk(KERN_DEBUG "floating point exception in \"%s\", type=%s\n",
 		xcp->op, rtnames[xcp->rt]);
 }
-
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index 3175477..2fd53c9 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -78,6 +78,7 @@ ieee754sp ieee754sp_abs(ieee754sp x)
 	SPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
 	}
 
diff --git a/arch/mips/mipssim/sim_int.c b/arch/mips/mipssim/sim_int.c
index 46067ad..5c779be 100644
--- a/arch/mips/mipssim/sim_int.c
+++ b/arch/mips/mipssim/sim_int.c
@@ -17,7 +17,6 @@
  */
 #include <linux/init.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <asm/mips-boards/simint.h>
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 94e05e5..0f9c488 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -174,7 +174,7 @@ static void octeon_flush_cache_page(struct vm_area_struct *vma,
  * Probe Octeon's caches
  *
  */
-static void __devinit probe_octeon(void)
+static void __cpuinit probe_octeon(void)
 {
 	unsigned long icache_size;
 	unsigned long dcache_size;
@@ -183,6 +183,7 @@ static void __devinit probe_octeon(void)
 
 	switch (c->cputype) {
 	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
 		config1 = read_c0_config1();
 		c->icache.linesz = 2 << ((config1 >> 19) & 7);
 		c->icache.sets = 64 << ((config1 >> 22) & 7);
@@ -192,10 +193,10 @@ static void __devinit probe_octeon(void)
 			c->icache.sets * c->icache.ways * c->icache.linesz;
 		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
 		c->dcache.linesz = 128;
-		if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
-			c->dcache.sets = 1; /* CN3XXX has one Dcache set */
-		else
+		if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
 			c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
+		else
+			c->dcache.sets = 1; /* CN3XXX has one Dcache set */
 		c->dcache.ways = 64;
 		dcache_size =
 			c->dcache.sets * c->dcache.ways * c->dcache.linesz;
@@ -235,7 +236,7 @@ static void __devinit probe_octeon(void)
  * Setup the Octeon cache flush routines
  *
  */
-void __devinit octeon_cache_init(void)
+void __cpuinit octeon_cache_init(void)
 {
 	extern unsigned long ebase;
 	extern char except_vec2_octeon;
@@ -305,4 +306,3 @@ asmlinkage void cache_parity_error_octeon_non_recoverable(void)
 {
 	cache_parity_error_octeon(1);
 }
-
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 102b2df..12af739 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -133,29 +133,50 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 }
 
 unsigned long _page_cachable_default;
-EXPORT_SYMBOL_GPL(_page_cachable_default);
+EXPORT_SYMBOL(_page_cachable_default);
 
 static inline void setup_protection_map(void)
 {
-	protection_map[0] = PAGE_NONE;
-	protection_map[1] = PAGE_READONLY;
-	protection_map[2] = PAGE_COPY;
-	protection_map[3] = PAGE_COPY;
-	protection_map[4] = PAGE_READONLY;
-	protection_map[5] = PAGE_READONLY;
-	protection_map[6] = PAGE_COPY;
-	protection_map[7] = PAGE_COPY;
-	protection_map[8] = PAGE_NONE;
-	protection_map[9] = PAGE_READONLY;
-	protection_map[10] = PAGE_SHARED;
-	protection_map[11] = PAGE_SHARED;
-	protection_map[12] = PAGE_READONLY;
-	protection_map[13] = PAGE_READONLY;
-	protection_map[14] = PAGE_SHARED;
-	protection_map[15] = PAGE_SHARED;
+	if (kernel_uses_smartmips_rixi) {
+		protection_map[0]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+		protection_map[1]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+		protection_map[2]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+		protection_map[3]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+		protection_map[4]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+		protection_map[5]  = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+		protection_map[6]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+		protection_map[7]  = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+
+		protection_map[8]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+		protection_map[9]  = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+		protection_map[10] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE | _PAGE_NO_READ);
+		protection_map[11] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE);
+		protection_map[12] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+		protection_map[13] = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+		protection_map[14] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE  | _PAGE_NO_READ);
+		protection_map[15] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE);
+
+	} else {
+		protection_map[0] = PAGE_NONE;
+		protection_map[1] = PAGE_READONLY;
+		protection_map[2] = PAGE_COPY;
+		protection_map[3] = PAGE_COPY;
+		protection_map[4] = PAGE_READONLY;
+		protection_map[5] = PAGE_READONLY;
+		protection_map[6] = PAGE_COPY;
+		protection_map[7] = PAGE_COPY;
+		protection_map[8] = PAGE_NONE;
+		protection_map[9] = PAGE_READONLY;
+		protection_map[10] = PAGE_SHARED;
+		protection_map[11] = PAGE_SHARED;
+		protection_map[12] = PAGE_READONLY;
+		protection_map[13] = PAGE_READONLY;
+		protection_map[14] = PAGE_SHARED;
+		protection_map[15] = PAGE_SHARED;
+	}
 }
 
-void __devinit cpu_cache_init(void)
+void __cpuinit cpu_cache_init(void)
 {
 	if (cpu_has_3k_cache) {
 		extern void __weak r3k_cache_init(void);
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 9367e33..9547bc0 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/scatterlist.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 
 #include <asm/cache.h>
 #include <asm/io.h>
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index e97a7a2..b78f7d9 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -99,8 +99,31 @@ good_area:
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
 	} else {
-		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
-			goto bad_area;
+		if (kernel_uses_smartmips_rixi) {
+			if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) {
+#if 0
+				pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n",
+					  raw_smp_processor_id(),
+					  current->comm, current->pid,
+					  field, address, write,
+					  field, regs->cp0_epc);
+#endif
+				goto bad_area;
+			}
+			if (!(vma->vm_flags & VM_READ)) {
+#if 0
+				pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n",
+					  raw_smp_processor_id(),
+					  current->comm, current->pid,
+					  field, address, write,
+					  field, regs->cp0_epc);
+#endif
+				goto bad_area;
+			}
+		} else {
+			if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+				goto bad_area;
+		}
 	}
 
 	/*
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index e274fda..127d732 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 8c2834f..a7fee0d 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
 #include <asm/mman.h>
@@ -97,4 +96,3 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
 	return page;
 }
-
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 1651942..2efcbd2 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -28,6 +28,7 @@
 #include <linux/proc_fs.h>
 #include <linux/pfn.h>
 #include <linux/hardirq.h>
+#include <linux/gfp.h>
 
 #include <asm/asm-offsets.h>
 #include <asm/bootinfo.h>
@@ -143,7 +144,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 	entrylo = pte.pte_high;
 #else
-	entrylo = pte_val(pte) >> 6;
+	entrylo = pte_to_entrylo(pte_val(pte));
 #endif
 
 	ENTER_CRITICAL(flags);
@@ -298,7 +299,7 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-static int __init page_is_ram(unsigned long pagenr)
+int page_is_ram(unsigned long pagenr)
 {
 	int i;
 
@@ -477,7 +478,7 @@ unsigned long pgd_current[NR_CPUS];
  * will officially be retired.
  */
 pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER);
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
 pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER);
 #endif
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 0c43248..cacfd31 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -10,6 +10,7 @@
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <asm/cacheflush.h>
 #include <asm/io.h>
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index f5c7375..36272f7 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -35,7 +35,7 @@
 #include <asm/sibyte/sb1250_dma.h>
 #endif
 
-#include "uasm.h"
+#include <asm/uasm.h>
 
 /* Registers used in the assembled routines. */
 #define ZERO 0
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index 1121019..78eaa4f 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -15,23 +15,31 @@
 void pgd_init(unsigned long page)
 {
 	unsigned long *p, *end;
+	unsigned long entry;
+
+#ifdef __PAGETABLE_PMD_FOLDED
+	entry = (unsigned long)invalid_pte_table;
+#else
+	entry = (unsigned long)invalid_pmd_table;
+#endif
 
  	p = (unsigned long *) page;
 	end = p + PTRS_PER_PGD;
 
 	while (p < end) {
-		p[0] = (unsigned long) invalid_pmd_table;
-		p[1] = (unsigned long) invalid_pmd_table;
-		p[2] = (unsigned long) invalid_pmd_table;
-		p[3] = (unsigned long) invalid_pmd_table;
-		p[4] = (unsigned long) invalid_pmd_table;
-		p[5] = (unsigned long) invalid_pmd_table;
-		p[6] = (unsigned long) invalid_pmd_table;
-		p[7] = (unsigned long) invalid_pmd_table;
+		p[0] = entry;
+		p[1] = entry;
+		p[2] = entry;
+		p[3] = entry;
+		p[4] = entry;
+		p[5] = entry;
+		p[6] = entry;
+		p[7] = entry;
 		p += 8;
 	}
 }
 
+#ifndef __PAGETABLE_PMD_FOLDED
 void pmd_init(unsigned long addr, unsigned long pagetable)
 {
 	unsigned long *p, *end;
@@ -40,17 +48,18 @@ void pmd_init(unsigned long addr, unsigned long pagetable)
 	end = p + PTRS_PER_PMD;
 
 	while (p < end) {
-		p[0] = (unsigned long)pagetable;
-		p[1] = (unsigned long)pagetable;
-		p[2] = (unsigned long)pagetable;
-		p[3] = (unsigned long)pagetable;
-		p[4] = (unsigned long)pagetable;
-		p[5] = (unsigned long)pagetable;
-		p[6] = (unsigned long)pagetable;
-		p[7] = (unsigned long)pagetable;
+		p[0] = pagetable;
+		p[1] = pagetable;
+		p[2] = pagetable;
+		p[3] = pagetable;
+		p[4] = pagetable;
+		p[5] = pagetable;
+		p[6] = pagetable;
+		p[7] = pagetable;
 		p += 8;
 	}
 }
+#endif
 
 void __init pagetable_init(void)
 {
@@ -59,8 +68,9 @@ void __init pagetable_init(void)
 
 	/* Initialize the entire pgd.  */
 	pgd_init((unsigned long)swapper_pg_dir);
+#ifndef __PAGETABLE_PMD_FOLDED
 	pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table);
-
+#endif
 	pgd_base = swapper_pg_dir;
 	/*
 	 * Fixed mappings:
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index d73428b..c618eed 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -303,7 +303,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 		unsigned long lo;
 		write_c0_pagemask(PM_HUGE_MASK);
 		ptep = (pte_t *)pmdp;
-		lo = pte_val(*ptep) >> 6;
+		lo = pte_to_entrylo(pte_val(*ptep));
 		write_c0_entrylo0(lo);
 		write_c0_entrylo1(lo + (HPAGE_SIZE >> 7));
 
@@ -323,8 +323,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 		ptep++;
 		write_c0_entrylo1(ptep->pte_high);
 #else
-		write_c0_entrylo0(pte_val(*ptep++) >> 6);
-		write_c0_entrylo1(pte_val(*ptep) >> 6);
+		write_c0_entrylo0(pte_to_entrylo(pte_val(*ptep++)));
+		write_c0_entrylo1(pte_to_entrylo(pte_val(*ptep)));
 #endif
 		mtc0_tlbw_hazard();
 		if (idx < 0)
@@ -337,40 +337,6 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	EXIT_CRITICAL(flags);
 }
 
-#if 0
-static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma,
-				       unsigned long address, pte_t pte)
-{
-	unsigned long flags;
-	unsigned int asid;
-	pgd_t *pgdp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	int idx;
-
-	ENTER_CRITICAL(flags);
-	address &= (PAGE_MASK << 1);
-	asid = read_c0_entryhi() & ASID_MASK;
-	write_c0_entryhi(address | asid);
-	pgdp = pgd_offset(vma->vm_mm, address);
-	mtc0_tlbw_hazard();
-	tlb_probe();
-	tlb_probe_hazard();
-	pmdp = pmd_offset(pgdp, address);
-	idx = read_c0_index();
-	ptep = pte_offset_map(pmdp, address);
-	write_c0_entrylo0(pte_val(*ptep++) >> 6);
-	write_c0_entrylo1(pte_val(*ptep) >> 6);
-	mtc0_tlbw_hazard();
-	if (idx < 0)
-		tlb_write_random();
-	else
-		tlb_write_indexed();
-	tlbw_use_hazard();
-	EXIT_CRITICAL(flags);
-}
-#endif
-
 void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	unsigned long entryhi, unsigned long pagemask)
 {
@@ -447,34 +413,6 @@ out:
 	return ret;
 }
 
-static void __cpuinit probe_tlb(unsigned long config)
-{
-	struct cpuinfo_mips *c = &current_cpu_data;
-	unsigned int reg;
-
-	/*
-	 * If this isn't a MIPS32 / MIPS64 compliant CPU.  Config 1 register
-	 * is not supported, we assume R4k style.  Cpu probing already figured
-	 * out the number of tlb entries.
-	 */
-	if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
-		return;
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * If TLB is shared in SMTC system, total size already
-	 * has been calculated and written into cpu_data tlbsize
-	 */
-	if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED)
-		return;
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-	reg = read_c0_config1();
-	if (!((config >> 7) & 3))
-		panic("No TLB present");
-
-	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
-}
-
 static int __cpuinitdata ntlb;
 static int __init set_ntlb(char *str)
 {
@@ -486,8 +424,6 @@ __setup("ntlb=", set_ntlb);
 
 void __cpuinit tlb_init(void)
 {
-	unsigned int config = read_c0_config();
-
 	/*
 	 * You should never change this register:
 	 *   - On R4600 1.7 the tlbp never hits for pages smaller than
@@ -495,13 +431,25 @@ void __cpuinit tlb_init(void)
 	 *   - The entire mm handling assumes the c0_pagemask register to
 	 *     be set to fixed-size pages.
 	 */
-	probe_tlb(config);
 	write_c0_pagemask(PM_DEFAULT_MASK);
 	write_c0_wired(0);
 	if (current_cpu_type() == CPU_R10000 ||
 	    current_cpu_type() == CPU_R12000 ||
 	    current_cpu_type() == CPU_R14000)
 		write_c0_framemask(0);
+
+	if (kernel_uses_smartmips_rixi) {
+		/*
+		 * Enable the no read, no exec bits, and enable large virtual
+		 * address.
+		 */
+		u32 pg = PG_RIE | PG_XIE;
+#ifdef CONFIG_64BIT
+		pg |= PG_ELPA;
+#endif
+		write_c0_pagegrain(pg);
+	}
+
 	temp_tlb_entry = current_cpu_data.tlbsize - 1;
 
         /* From this point on the ARC firmware is dead.  */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index badcf5e..86f004d 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -29,8 +29,17 @@
 
 #include <asm/mmu_context.h>
 #include <asm/war.h>
+#include <asm/uasm.h>
+
+/*
+ * TLB load/store/modify handlers.
+ *
+ * Only the fastpath gets synthesized at runtime, the slowpath for
+ * do_page_fault remains normal asm.
+ */
+extern void tlb_do_page_fault_0(void);
+extern void tlb_do_page_fault_1(void);
 
-#include "uasm.h"
 
 static inline int r45k_bvahwbug(void)
 {
@@ -77,11 +86,14 @@ enum label_id {
 	label_vmalloc_done,
 	label_tlbw_hazard,
 	label_split,
+	label_tlbl_goaround1,
+	label_tlbl_goaround2,
 	label_nopage_tlbl,
 	label_nopage_tlbs,
 	label_nopage_tlbm,
 	label_smp_pgtable_change,
 	label_r3000_write_probe_fail,
+	label_large_segbits_fault,
 #ifdef CONFIG_HUGETLB_PAGE
 	label_tlb_huge_update,
 #endif
@@ -93,11 +105,14 @@ UASM_L_LA(_vmalloc)
 UASM_L_LA(_vmalloc_done)
 UASM_L_LA(_tlbw_hazard)
 UASM_L_LA(_split)
+UASM_L_LA(_tlbl_goaround1)
+UASM_L_LA(_tlbl_goaround2)
 UASM_L_LA(_nopage_tlbl)
 UASM_L_LA(_nopage_tlbs)
 UASM_L_LA(_nopage_tlbm)
 UASM_L_LA(_smp_pgtable_change)
 UASM_L_LA(_r3000_write_probe_fail)
+UASM_L_LA(_large_segbits_fault)
 #ifdef CONFIG_HUGETLB_PAGE
 UASM_L_LA(_tlb_huge_update)
 #endif
@@ -154,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata;
 static struct uasm_label labels[128] __cpuinitdata;
 static struct uasm_reloc relocs[128] __cpuinitdata;
 
+#ifdef CONFIG_64BIT
+static int check_for_high_segbits __cpuinitdata;
+#endif
+
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 /*
  * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
@@ -397,36 +416,60 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	}
 }
 
-#ifdef CONFIG_HUGETLB_PAGE
-static __cpuinit void build_huge_tlb_write_entry(u32 **p,
-						 struct uasm_label **l,
-						 struct uasm_reloc **r,
-						 unsigned int tmp,
-						 enum tlb_write_entry wmode)
+static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
+								  unsigned int reg)
 {
-	/* Set huge page tlb entry size */
-	uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16);
-	uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff);
-	uasm_i_mtc0(p, tmp, C0_PAGEMASK);
+	if (kernel_uses_smartmips_rixi) {
+		UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC));
+		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+	} else {
+#ifdef CONFIG_64BIT_PHYS_ADDR
+		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
+#else
+		UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
+#endif
+	}
+}
 
-	build_tlb_write_entry(p, l, r, wmode);
+#ifdef CONFIG_HUGETLB_PAGE
 
+static __cpuinit void build_restore_pagemask(u32 **p,
+					     struct uasm_reloc **r,
+					     unsigned int tmp,
+					     enum label_id lid)
+{
 	/* Reset default page size */
 	if (PM_DEFAULT_MASK >> 16) {
 		uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
 		uasm_i_ori(p, tmp, tmp, PM_DEFAULT_MASK & 0xffff);
-		uasm_il_b(p, r, label_leave);
+		uasm_il_b(p, r, lid);
 		uasm_i_mtc0(p, tmp, C0_PAGEMASK);
 	} else if (PM_DEFAULT_MASK) {
 		uasm_i_ori(p, tmp, 0, PM_DEFAULT_MASK);
-		uasm_il_b(p, r, label_leave);
+		uasm_il_b(p, r, lid);
 		uasm_i_mtc0(p, tmp, C0_PAGEMASK);
 	} else {
-		uasm_il_b(p, r, label_leave);
+		uasm_il_b(p, r, lid);
 		uasm_i_mtc0(p, 0, C0_PAGEMASK);
 	}
 }
 
+static __cpuinit void build_huge_tlb_write_entry(u32 **p,
+						 struct uasm_label **l,
+						 struct uasm_reloc **r,
+						 unsigned int tmp,
+						 enum tlb_write_entry wmode)
+{
+	/* Set huge page tlb entry size */
+	uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16);
+	uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff);
+	uasm_i_mtc0(p, tmp, C0_PAGEMASK);
+
+	build_tlb_write_entry(p, l, r, wmode);
+
+	build_restore_pagemask(p, r, tmp, label_leave);
+}
+
 /*
  * Check if Huge PTE is present, if so then jump to LABEL.
  */
@@ -460,15 +503,15 @@ static __cpuinit void build_huge_update_entries(u32 **p,
 	if (!small_sequence)
 		uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16));
 
-	UASM_i_SRL(p, pte, pte, 6); /* convert to entrylo */
-	uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* load it */
+	build_convert_pte_to_entrylo(p, pte);
+	UASM_i_MTC0(p, pte, C0_ENTRYLO0); /* load it */
 	/* convert to entrylo1 */
 	if (small_sequence)
 		UASM_i_ADDIU(p, pte, pte, HPAGE_SIZE >> 7);
 	else
 		UASM_i_ADDU(p, pte, pte, tmp);
 
-	uasm_i_mtc0(p, pte, C0_ENTRYLO1); /* load it */
+	UASM_i_MTC0(p, pte, C0_ENTRYLO1); /* load it */
 }
 
 static __cpuinit void build_huge_handler_tail(u32 **p,
@@ -505,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-	uasm_il_bltz(p, r, tmp, label_vmalloc);
+
+	if (check_for_high_segbits) {
+		/*
+		 * The kernel currently implicitely assumes that the
+		 * MIPS SEGBITS parameter for the processor is
+		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
+		 * allocate virtual addresses outside the maximum
+		 * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
+		 * that doesn't prevent user code from accessing the
+		 * higher xuseg addresses.  Here, we make sure that
+		 * everything but the lower xuseg addresses goes down
+		 * the module_alloc/vmalloc path.
+		 */
+		uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+		uasm_il_bnez(p, r, ptr, label_vmalloc);
+	} else {
+		uasm_il_bltz(p, r, tmp, label_vmalloc);
+	}
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_MIPS_PGD_C0_CONTEXT
@@ -522,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * SMTC uses TCBind value as "CPU" index
 	 */
 	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	uasm_i_dsrl(p, ptr, ptr, 19);
+	uasm_i_dsrl_safe(p, ptr, ptr, 19);
 # else
 	/*
 	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
 	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
-	uasm_i_dsrl(p, ptr, ptr, 23);
+	uasm_i_dsrl_safe(p, ptr, ptr, 23);
 # endif
 	UASM_i_LA_mostly(p, tmp, pgdc);
 	uasm_i_daddu(p, ptr, ptr, tmp);
@@ -542,42 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	uasm_l_vmalloc_done(l, *p);
 
-	if (PGDIR_SHIFT - 3 < 32)		/* get pgd offset in bytes */
-		uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
-	else
-		uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
+	/* get pgd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
 
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
+#ifndef __PAGETABLE_PMD_FOLDED
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
 	uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
-	uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
+#endif
 }
 
+enum vmalloc64_mode {not_refill, refill};
 /*
  * BVADDR is the faulting address, PTR is scratch.
  * PTR will hold the pgd for vmalloc.
  */
 static void __cpuinit
 build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
-			unsigned int bvaddr, unsigned int ptr)
+			unsigned int bvaddr, unsigned int ptr,
+			enum vmalloc64_mode mode)
 {
 	long swpd = (long)swapper_pg_dir;
+	int single_insn_swpd;
+	int did_vmalloc_branch = 0;
+
+	single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
 
 	uasm_l_vmalloc(l, *p);
 
-	if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
-		uasm_il_b(p, r, label_vmalloc_done);
-		uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
-	} else {
-		UASM_i_LA_mostly(p, ptr, swpd);
-		uasm_il_b(p, r, label_vmalloc_done);
-		if (uasm_in_compat_space_p(swpd))
-			uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
-		else
-			uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+	if (mode == refill && check_for_high_segbits) {
+		if (single_insn_swpd) {
+			uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+			did_vmalloc_branch = 1;
+			/* fall through */
+		} else {
+			uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
+		}
+	}
+	if (!did_vmalloc_branch) {
+		if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
+			uasm_il_b(p, r, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+		} else {
+			UASM_i_LA_mostly(p, ptr, swpd);
+			uasm_il_b(p, r, label_vmalloc_done);
+			if (uasm_in_compat_space_p(swpd))
+				uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
+			else
+				uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+		}
+	}
+	if (mode == refill && check_for_high_segbits) {
+		uasm_l_large_segbits_fault(l, *p);
+		/*
+		 * We get here if we are an xsseg address, or if we are
+		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
+		 *
+		 * Ignoring xsseg (assume disabled so would generate
+		 * (address errors?), the only remaining possibility
+		 * is the upper xuseg addresses.  On processors with
+		 * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
+		 * addresses would have taken an address error. We try
+		 * to mimic that here by taking a load/istream page
+		 * fault.
+		 */
+		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
+		uasm_i_jr(p, ptr);
+		uasm_i_nop(p);
 	}
 }
 
@@ -684,35 +780,53 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
 	if (cpu_has_64bits) {
 		uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
 		uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
-		uasm_i_dsrl(p, tmp, tmp, 6); /* convert to entrylo0 */
-		uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
-		uasm_i_dsrl(p, ptep, ptep, 6); /* convert to entrylo1 */
-		uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+		if (kernel_uses_smartmips_rixi) {
+			UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC));
+			UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC));
+			UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+			UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+		} else {
+			uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+			uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+		}
+		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
 	} else {
 		int pte_off_even = sizeof(pte_t) / 2;
 		int pte_off_odd = pte_off_even + sizeof(pte_t);
 
 		/* The pte entries are pre-shifted */
 		uasm_i_lw(p, tmp, pte_off_even, ptep); /* get even pte */
-		uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
+		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
 		uasm_i_lw(p, ptep, pte_off_odd, ptep); /* get odd pte */
-		uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
 	}
 #else
 	UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
 	UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
 	if (r45k_bvahwbug())
 		build_tlb_probe_entry(p);
-	UASM_i_SRL(p, tmp, tmp, 6); /* convert to entrylo0 */
-	if (r4k_250MHZhwbug())
-		uasm_i_mtc0(p, 0, C0_ENTRYLO0);
-	uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
-	UASM_i_SRL(p, ptep, ptep, 6); /* convert to entrylo1 */
-	if (r45k_bvahwbug())
-		uasm_i_mfc0(p, tmp, C0_INDEX);
+	if (kernel_uses_smartmips_rixi) {
+		UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC));
+		UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC));
+		UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+		if (r4k_250MHZhwbug())
+			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+		UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+	} else {
+		UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+		if (r4k_250MHZhwbug())
+			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+		UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+		if (r45k_bvahwbug())
+			uasm_i_mfc0(p, tmp, C0_INDEX);
+	}
 	if (r4k_250MHZhwbug())
-		uasm_i_mtc0(p, 0, C0_ENTRYLO1);
-	uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+		UASM_i_MTC0(p, 0, C0_ENTRYLO1);
+	UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
 #endif
 }
 
@@ -741,10 +855,15 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	 * create the plain linear handler
 	 */
 	if (bcm1250_m3_war()) {
-		UASM_i_MFC0(&p, K0, C0_BADVADDR);
-		UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+		unsigned int segbits = 44;
+
+		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
+		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
 	}
@@ -773,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 #endif
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
+	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
 #endif
 
 	/*
@@ -883,15 +1002,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 }
 
 /*
- * TLB load/store/modify handlers.
- *
- * Only the fastpath gets synthesized at runtime, the slowpath for
- * do_page_fault remains normal asm.
- */
-extern void tlb_do_page_fault_0(void);
-extern void tlb_do_page_fault_1(void);
-
-/*
  * 128 instructions for the fastpath handler is generous and should
  * never be exceeded.
  */
@@ -985,9 +1095,14 @@ static void __cpuinit
 build_pte_present(u32 **p, struct uasm_reloc **r,
 		  unsigned int pte, unsigned int ptr, enum label_id lid)
 {
-	uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
-	uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
-	uasm_il_bnez(p, r, pte, lid);
+	if (kernel_uses_smartmips_rixi) {
+		uasm_i_andi(p, pte, pte, _PAGE_PRESENT);
+		uasm_il_beqz(p, r, pte, lid);
+	} else {
+		uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
+		uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
+		uasm_il_bnez(p, r, pte, lid);
+	}
 	iPTE_LW(p, pte, ptr);
 }
 
@@ -1245,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
 	uasm_i_eret(p); /* return from trap */
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
+	build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
 #endif
 }
 
@@ -1260,10 +1375,15 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
 	memset(relocs, 0, sizeof(relocs));
 
 	if (bcm1250_m3_war()) {
-		UASM_i_MFC0(&p, K0, C0_BADVADDR);
-		UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+		unsigned int segbits = 44;
+
+		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
+		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
 	}
@@ -1272,6 +1392,34 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
 	build_pte_present(&p, &r, K0, K1, label_nopage_tlbl);
 	if (m4kc_tlbp_war())
 		build_tlb_probe_entry(&p);
+
+	if (kernel_uses_smartmips_rixi) {
+		/*
+		 * If the page is not _PAGE_VALID, RI or XI could not
+		 * have triggered it.  Skip the expensive test..
+		 */
+		uasm_i_andi(&p, K0, K0, _PAGE_VALID);
+		uasm_il_beqz(&p, &r, K0, label_tlbl_goaround1);
+		uasm_i_nop(&p);
+
+		uasm_i_tlbr(&p);
+		/* Examine  entrylo 0 or 1 based on ptr. */
+		uasm_i_andi(&p, K0, K1, sizeof(pte_t));
+		uasm_i_beqz(&p, K0, 8);
+
+		UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/
+		UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */
+		/*
+		 * If the entryLo (now in K0) is valid (bit 1), RI or
+		 * XI must have triggered it.
+		 */
+		uasm_i_andi(&p, K0, K0, 2);
+		uasm_il_bnez(&p, &r, K0, label_nopage_tlbl);
+
+		uasm_l_tlbl_goaround1(&l, p);
+		/* Reload the PTE value */
+		iPTE_LW(&p, K0, K1);
+	}
 	build_make_valid(&p, &r, K0, K1);
 	build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
 
@@ -1284,6 +1432,40 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
 	iPTE_LW(&p, K0, K1);
 	build_pte_present(&p, &r, K0, K1, label_nopage_tlbl);
 	build_tlb_probe_entry(&p);
+
+	if (kernel_uses_smartmips_rixi) {
+		/*
+		 * If the page is not _PAGE_VALID, RI or XI could not
+		 * have triggered it.  Skip the expensive test..
+		 */
+		uasm_i_andi(&p, K0, K0, _PAGE_VALID);
+		uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2);
+		uasm_i_nop(&p);
+
+		uasm_i_tlbr(&p);
+		/* Examine  entrylo 0 or 1 based on ptr. */
+		uasm_i_andi(&p, K0, K1, sizeof(pte_t));
+		uasm_i_beqz(&p, K0, 8);
+
+		UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/
+		UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */
+		/*
+		 * If the entryLo (now in K0) is valid (bit 1), RI or
+		 * XI must have triggered it.
+		 */
+		uasm_i_andi(&p, K0, K0, 2);
+		uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2);
+		/* Reload the PTE value */
+		iPTE_LW(&p, K0, K1);
+
+		/*
+		 * We clobbered C0_PAGEMASK, restore it.  On the other branch
+		 * it is restored in build_huge_tlb_write_entry.
+		 */
+		build_restore_pagemask(&p, &r, K0, label_nopage_tlbl);
+
+		uasm_l_tlbl_goaround2(&l, p);
+	}
 	uasm_i_ori(&p, K0, K0, (_PAGE_ACCESSED | _PAGE_VALID));
 	build_huge_handler_tail(&p, &r, &l, K0, K1);
 #endif
@@ -1402,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void)
 	 */
 	static int run_once = 0;
 
+#ifdef CONFIG_64BIT
+	check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+#endif
+
 	switch (current_cpu_type()) {
 	case CPU_R2000:
 	case CPU_R3000:
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 0a165c5..611d564 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -19,8 +19,7 @@
 #include <asm/inst.h>
 #include <asm/elf.h>
 #include <asm/bugs.h>
-
-#include "uasm.h"
+#include <asm/uasm.h>
 
 enum fields {
 	RS = 0x001,
@@ -32,7 +31,8 @@ enum fields {
 	BIMM = 0x040,
 	JIMM = 0x080,
 	FUNC = 0x100,
-	SET = 0x200
+	SET = 0x200,
+	SCIMM = 0x400
 };
 
 #define OP_MASK		0x3f
@@ -53,6 +53,8 @@ enum fields {
 #define FUNC_SH		0
 #define SET_MASK	0x7
 #define SET_SH		0
+#define SCIMM_MASK	0xfffff
+#define SCIMM_SH	6
 
 enum opcode {
 	insn_invalid,
@@ -62,9 +64,10 @@ enum opcode {
 	insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
 	insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
 	insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
-	insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
-	insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw,
-	insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins
+	insn_mtc0, insn_or, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
+	insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw,
+	insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
+	insn_dins, insn_syscall
 };
 
 struct insn {
@@ -117,6 +120,7 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_lw,  M(lw_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_mfc0,  M(cop0_op, mfc_op, 0, 0, 0, 0),  RT | RD | SET},
 	{ insn_mtc0,  M(cop0_op, mtc_op, 0, 0, 0, 0),  RT | RD | SET},
+	{ insn_or,  M(spec_op, 0, 0, 0, 0, or_op),  RS | RT | RD },
 	{ insn_ori,  M(ori_op, 0, 0, 0, 0, 0),  RS | RT | UIMM },
 	{ insn_pref,  M(pref_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_rfe,  M(cop0_op, cop_op, 0, 0, 0, rfe_op),  0 },
@@ -126,14 +130,17 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_sll,  M(spec_op, 0, 0, 0, 0, sll_op),  RT | RD | RE },
 	{ insn_sra,  M(spec_op, 0, 0, 0, 0, sra_op),  RT | RD | RE },
 	{ insn_srl,  M(spec_op, 0, 0, 0, 0, srl_op),  RT | RD | RE },
+	{ insn_rotr,  M(spec_op, 1, 0, 0, 0, srl_op),  RT | RD | RE },
 	{ insn_subu,  M(spec_op, 0, 0, 0, 0, subu_op),  RS | RT | RD },
 	{ insn_sw,  M(sw_op, 0, 0, 0, 0, 0),  RS | RT | SIMM },
 	{ insn_tlbp,  M(cop0_op, cop_op, 0, 0, 0, tlbp_op),  0 },
+	{ insn_tlbr,  M(cop0_op, cop_op, 0, 0, 0, tlbr_op),  0 },
 	{ insn_tlbwi,  M(cop0_op, cop_op, 0, 0, 0, tlbwi_op),  0 },
 	{ insn_tlbwr,  M(cop0_op, cop_op, 0, 0, 0, tlbwr_op),  0 },
 	{ insn_xor,  M(spec_op, 0, 0, 0, 0, xor_op),  RS | RT | RD },
 	{ insn_xori,  M(xori_op, 0, 0, 0, 0, 0),  RS | RT | UIMM },
 	{ insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
+	{ insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
 	{ insn_invalid, 0, 0 }
 };
 
@@ -206,6 +213,14 @@ static inline __cpuinit u32 build_jimm(u32 arg)
 	return (arg >> 2) & JIMM_MASK;
 }
 
+static inline __cpuinit u32 build_scimm(u32 arg)
+{
+	if (arg & ~SCIMM_MASK)
+		printk(KERN_WARNING "Micro-assembler field overflow\n");
+
+	return (arg & SCIMM_MASK) << SCIMM_SH;
+}
+
 static inline __cpuinit u32 build_func(u32 arg)
 {
 	if (arg & ~FUNC_MASK)
@@ -264,6 +279,8 @@ static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...)
 		op |= build_func(va_arg(ap, u32));
 	if (ip->fields & SET)
 		op |= build_set(va_arg(ap, u32));
+	if (ip->fields & SCIMM)
+		op |= build_scimm(va_arg(ap, u32));
 	va_end(ap);
 
 	**buf = op;
@@ -371,6 +388,7 @@ I_u2s3u1(_lw)
 I_u1u2u3(_mfc0)
 I_u1u2u3(_mtc0)
 I_u2u1u3(_ori)
+I_u3u1u2(_or)
 I_u2s3u1(_pref)
 I_0(_rfe)
 I_u2s3u1(_sc)
@@ -379,14 +397,17 @@ I_u2s3u1(_sd)
 I_u2u1u3(_sll)
 I_u2u1u3(_sra)
 I_u2u1u3(_srl)
+I_u2u1u3(_rotr)
 I_u3u1u2(_subu)
 I_u2s3u1(_sw)
 I_0(_tlbp)
+I_0(_tlbr)
 I_0(_tlbwi)
 I_0(_tlbwr)
 I_u3u1u2(_xor)
 I_u2u1u3(_xori)
 I_u2u1msbu3(_dins);
+I_u1(_syscall);
 
 /* Handle labels. */
 void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
deleted file mode 100644
index 3d153ed..0000000
--- a/arch/mips/mm/uasm.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005, 2006, 2008  Thiemo Seufer
- * Copyright (C) 2005  Maciej W. Rozycki
- * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/types.h>
-
-#define Ip_u1u2u3(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u2u1u3(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u3u1u2(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u1u2s3(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
-
-#define Ip_u2s3u1(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
-
-#define Ip_u2u1s3(op)							\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
-
-#define Ip_u2u1msbu3(op)						\
-void __cpuinit								\
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c,	\
-	   unsigned int d)
-
-#define Ip_u1u2(op)							\
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
-
-#define Ip_u1s2(op)							\
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
-
-#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
-
-#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
-
-Ip_u2u1s3(_addiu);
-Ip_u3u1u2(_addu);
-Ip_u2u1u3(_andi);
-Ip_u3u1u2(_and);
-Ip_u1u2s3(_beq);
-Ip_u1u2s3(_beql);
-Ip_u1s2(_bgez);
-Ip_u1s2(_bgezl);
-Ip_u1s2(_bltz);
-Ip_u1s2(_bltzl);
-Ip_u1u2s3(_bne);
-Ip_u2s3u1(_cache);
-Ip_u1u2u3(_dmfc0);
-Ip_u1u2u3(_dmtc0);
-Ip_u2u1s3(_daddiu);
-Ip_u3u1u2(_daddu);
-Ip_u2u1u3(_dsll);
-Ip_u2u1u3(_dsll32);
-Ip_u2u1u3(_dsra);
-Ip_u2u1u3(_dsrl);
-Ip_u2u1u3(_dsrl32);
-Ip_u2u1u3(_drotr);
-Ip_u3u1u2(_dsubu);
-Ip_0(_eret);
-Ip_u1(_j);
-Ip_u1(_jal);
-Ip_u1(_jr);
-Ip_u2s3u1(_ld);
-Ip_u2s3u1(_ll);
-Ip_u2s3u1(_lld);
-Ip_u1s2(_lui);
-Ip_u2s3u1(_lw);
-Ip_u1u2u3(_mfc0);
-Ip_u1u2u3(_mtc0);
-Ip_u2u1u3(_ori);
-Ip_u2s3u1(_pref);
-Ip_0(_rfe);
-Ip_u2s3u1(_sc);
-Ip_u2s3u1(_scd);
-Ip_u2s3u1(_sd);
-Ip_u2u1u3(_sll);
-Ip_u2u1u3(_sra);
-Ip_u2u1u3(_srl);
-Ip_u3u1u2(_subu);
-Ip_u2s3u1(_sw);
-Ip_0(_tlbp);
-Ip_0(_tlbwi);
-Ip_0(_tlbwr);
-Ip_u3u1u2(_xor);
-Ip_u2u1u3(_xori);
-Ip_u2u1msbu3(_dins);
-
-/* Handle labels. */
-struct uasm_label {
-	u32 *addr;
-	int lab;
-};
-
-void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
-#ifdef CONFIG_64BIT
-int uasm_in_compat_space_p(long addr);
-#endif
-int uasm_rel_hi(long val);
-int uasm_rel_lo(long val);
-void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
-void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
-
-#define UASM_L_LA(lb)							\
-static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
-{									\
-	uasm_build_label(lab, addr, label##lb);				\
-}
-
-/* convenience macros for instructions */
-#ifdef CONFIG_64BIT
-# define UASM_i_LW(buf, rs, rt, off) uasm_i_ld(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
-# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh)
-# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh)
-# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
-# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_dsubu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
-#else
-# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
-# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
-# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh)
-# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
-# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_subu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
-#endif
-
-#define uasm_i_b(buf, off) uasm_i_beq(buf, 0, 0, off)
-#define uasm_i_beqz(buf, rs, off) uasm_i_beq(buf, rs, 0, off)
-#define uasm_i_beqzl(buf, rs, off) uasm_i_beql(buf, rs, 0, off)
-#define uasm_i_bnez(buf, rs, off) uasm_i_bne(buf, rs, 0, off)
-#define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
-#define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
-#define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
-#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
-#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
-
-/* Handle relocations. */
-struct uasm_reloc {
-	u32 *addr;
-	unsigned int type;
-	int lab;
-};
-
-/* This is zero so we can use zeroed label arrays. */
-#define UASM_LABEL_INVALID 0
-
-void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
-void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
-void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
-void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
-void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
-	u32 *first, u32 *end, u32 *target);
-int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
-
-/* Convenience functions for labeled branches. */
-void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
-void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
-		 unsigned int reg2, int lid);
-void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 4c3fca1..15949b0 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -25,7 +25,6 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel_stat.h>
@@ -52,7 +51,7 @@ static unsigned long _msc01_biu_base;
 static unsigned long _gcmp_base;
 static unsigned int ipi_map[NR_CPUS];
 
-static DEFINE_SPINLOCK(mips_irq_lock);
+static DEFINE_RAW_SPINLOCK(mips_irq_lock);
 
 static inline int mips_pcibios_iack(void)
 {
@@ -103,7 +102,7 @@ static inline int get_int(void)
 {
 	unsigned long flags;
 	int irq;
-	spin_lock_irqsave(&mips_irq_lock, flags);
+	raw_spin_lock_irqsave(&mips_irq_lock, flags);
 
 	irq = mips_pcibios_iack();
 
@@ -113,7 +112,7 @@ static inline int get_int(void)
 	 * on an SMP system,  so leave it up to the generic code...
 	 */
 
-	spin_unlock_irqrestore(&mips_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
 
 	return irq;
 }
diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index 2fbfa1a..bf80921 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -247,6 +247,8 @@ void __init mips_pcibios_init(void)
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
+	controller->io_map_base = mips_io_port_base;
+
 	register_pci_controller(controller);
 }
 
diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c
index 3a467c0..941916f 100644
--- a/arch/mips/nxp/pnx833x/common/interrupts.c
+++ b/arch/mips/nxp/pnx833x/common/interrupts.c
@@ -156,19 +156,19 @@ static int irqflags[PNX833X_PIC_NUM_IRQ];	/* initialized by zeroes */
 #define IRQFLAG_STARTED		1
 #define IRQFLAG_DISABLED	2
 
-static DEFINE_SPINLOCK(pnx833x_irq_lock);
+static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock);
 
 static unsigned int pnx833x_startup_pic_irq(unsigned int irq)
 {
 	unsigned long flags;
 	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
 
-	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
 
 	irqflags[pic_irq] = IRQFLAG_STARTED;	/* started, not disabled */
 	pnx833x_hard_enable_pic_irq(pic_irq);
 
-	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
 	return 0;
 }
 
@@ -177,12 +177,12 @@ static void pnx833x_shutdown_pic_irq(unsigned int irq)
 	unsigned long flags;
 	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
 
-	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
 
 	irqflags[pic_irq] = 0;			/* not started */
 	pnx833x_hard_disable_pic_irq(pic_irq);
 
-	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
 }
 
 static void pnx833x_enable_pic_irq(unsigned int irq)
@@ -190,13 +190,13 @@ static void pnx833x_enable_pic_irq(unsigned int irq)
 	unsigned long flags;
 	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
 
-	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
 
 	irqflags[pic_irq] &= ~IRQFLAG_DISABLED;
 	if (irqflags[pic_irq] == IRQFLAG_STARTED)
 		pnx833x_hard_enable_pic_irq(pic_irq);
 
-	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
 }
 
 static void pnx833x_disable_pic_irq(unsigned int irq)
@@ -204,12 +204,12 @@ static void pnx833x_disable_pic_irq(unsigned int irq)
 	unsigned long flags;
 	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
 
-	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
 
 	irqflags[pic_irq] |= IRQFLAG_DISABLED;
 	pnx833x_hard_disable_pic_irq(pic_irq);
 
-	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
 }
 
 static void pnx833x_ack_pic_irq(unsigned int irq)
@@ -220,15 +220,15 @@ static void pnx833x_end_pic_irq(unsigned int irq)
 {
 }
 
-static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
+static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
 
 static unsigned int pnx833x_startup_gpio_irq(unsigned int irq)
 {
 	int pin = irq - PNX833X_GPIO_IRQ_BASE;
 	unsigned long flags;
-	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
 	pnx833x_gpio_enable_irq(pin);
-	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
 	return 0;
 }
 
@@ -236,18 +236,18 @@ static void pnx833x_enable_gpio_irq(unsigned int irq)
 {
 	int pin = irq - PNX833X_GPIO_IRQ_BASE;
 	unsigned long flags;
-	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
 	pnx833x_gpio_enable_irq(pin);
-	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
 }
 
 static void pnx833x_disable_gpio_irq(unsigned int irq)
 {
 	int pin = irq - PNX833X_GPIO_IRQ_BASE;
 	unsigned long flags;
-	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
 	pnx833x_gpio_disable_irq(pin);
-	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
 }
 
 static void pnx833x_ack_gpio_irq(unsigned int irq)
@@ -258,9 +258,9 @@ static void pnx833x_end_gpio_irq(unsigned int irq)
 {
 	int pin = irq - PNX833X_GPIO_IRQ_BASE;
 	unsigned long flags;
-	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
 	pnx833x_gpio_clear_irq(pin);
-	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
 }
 
 static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type)
@@ -377,4 +377,3 @@ void __init plat_time_init(void)
 
 	mips_hpt_frequency *= 500000;
 }
-
diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/nxp/pnx833x/common/prom.c
index 2a41e8f..29969f9 100644
--- a/arch/mips/nxp/pnx833x/common/prom.c
+++ b/arch/mips/nxp/pnx833x/common/prom.c
@@ -62,9 +62,3 @@ char __init *prom_getenv(char *envname)
 void __init prom_free_prom_memory(void)
 {
 }
-
-char * __init prom_getcmdline(void)
-{
-	return arcs_cmdline;
-}
-
diff --git a/arch/mips/nxp/pnx833x/common/reset.c b/arch/mips/nxp/pnx833x/common/reset.c
index a9bc9ba..e0ea96d 100644
--- a/arch/mips/nxp/pnx833x/common/reset.c
+++ b/arch/mips/nxp/pnx833x/common/reset.c
@@ -22,7 +22,6 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/slab.h>
 #include <linux/reboot.h>
 #include <pnx833x.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index 7aca7d5..cfed505 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/random.h>
diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c
index eee4f3d..98e86dd 100644
--- a/arch/mips/nxp/pnx8550/common/pci.c
+++ b/arch/mips/nxp/pnx8550/common/pci.c
@@ -44,6 +44,7 @@ extern struct pci_ops pnx8550_pci_ops;
 
 static struct pci_controller pnx8550_controller = {
 	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
 };
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index af094cd..3bba5ec 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -16,7 +16,6 @@
 #include <linux/proc_fs.h>
 #include <linux/irq.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/random.h>
diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/nxp/pnx8550/common/prom.c
index 2f56745..32f7009 100644
--- a/arch/mips/nxp/pnx8550/common/prom.c
+++ b/arch/mips/nxp/pnx8550/common/prom.c
@@ -124,6 +124,5 @@ void prom_putchar(char c)
 	}
 }
 
-EXPORT_SYMBOL(prom_getcmdline);
 EXPORT_SYMBOL(get_ethernet_addr);
 EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c
index 7b2cbc5..fadd8744 100644
--- a/arch/mips/nxp/pnx8550/common/reset.c
+++ b/arch/mips/nxp/pnx8550/common/reset.c
@@ -20,7 +20,8 @@
  * Reset the PNX8550 board.
  *
  */
-#include <linux/slab.h>
+#include <linux/kernel.h>
+
 #include <asm/reboot.h>
 #include <glb.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 2aed50f..64246c9 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -113,7 +113,7 @@ void __init plat_mem_setup(void)
 	PNX8550_GLB2_ENAB_INTA_O = 0;
 
 	/* IO/MEM resources. */
-	set_io_port_base(KSEG1);
+	set_io_port_base(PNX8550_PORT_BASE);
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 	iomem_resource.start = 0;
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 7832ad2..f9eb1ab 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2004, 2005 Ralf Baechle
  * Copyright (C) 2005 MIPS Technologies, Inc.
  */
+#include <linux/compiler.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/oprofile.h>
@@ -14,9 +15,9 @@
 
 #include "op_impl.h"
 
-extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
-extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
-extern struct op_mips_model op_model_loongson2_ops __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __weak;
+extern struct op_mips_model op_model_rm9000_ops __weak;
+extern struct op_mips_model op_model_loongson2_ops __weak;
 
 static struct op_mips_model *model;
 
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 475ff46..60d3ea6 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -3,12 +3,11 @@
  *
  * Copyright (C) 2009 Lemote Inc.
  * Author: Yanhua <yanh@lemote.com>
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
- *
  */
 #include <linux/init.h>
 #include <linux/oprofile.h>
@@ -17,24 +16,18 @@
 #include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
 #include "op_impl.h"
 
-/*
- * a patch should be sent to oprofile with the loongson-specific support.
- * otherwise, the oprofile tool will not recognize this and complain about
- * "cpu_type 'unset' is not valid".
- */
 #define LOONGSON2_CPU_TYPE	"mips/loongson2"
 
-#define LOONGSON2_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
-#define LOONGSON2_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
-
-#define LOONGSON2_PERFCNT_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCNT_KERNEL		(1UL    <<  1)
-#define LOONGSON2_PERFCNT_SUPERVISOR	(1UL    <<  2)
-#define LOONGSON2_PERFCNT_USER			(1UL    <<  3)
-#define LOONGSON2_PERFCNT_INT_EN		(1UL    <<  4)
 #define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
 
-/* Loongson2 performance counter register */
+#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL    <<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL    <<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL    <<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL    <<  4)
+#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
+	(((event) & 0x0f) << ((idx) ? 9 : 5))
+
 #define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
 #define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
 #define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
@@ -47,11 +40,14 @@ static struct loongson2_register_config {
 	int cnt1_enabled, cnt2_enabled;
 } reg;
 
-DEFINE_SPINLOCK(sample_lock);
-
 static char *oprofid = "LoongsonPerf";
 static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void reset_counters(void *arg)
+{
+	write_c0_perfctrl(0);
+	write_c0_perfcnt(0);
+}
 
 static void loongson2_reg_setup(struct op_counter_config *cfg)
 {
@@ -59,41 +55,38 @@ static void loongson2_reg_setup(struct op_counter_config *cfg)
 
 	reg.reset_counter1 = 0;
 	reg.reset_counter2 = 0;
-	/* Compute the performance counter ctrl word.  */
-	/* For now count kernel and user mode */
+
+	/*
+	 * Compute the performance counter ctrl word.
+	 * For now, count kernel and user mode.
+	 */
 	if (cfg[0].enabled) {
-		ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
 		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
 	}
 
 	if (cfg[1].enabled) {
-		ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event);
-		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
+		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
 	}
 
 	if (cfg[0].enabled || cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN;
+		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
 		if (cfg[0].kernel || cfg[1].kernel)
-			ctrl |= LOONGSON2_PERFCNT_KERNEL;
+			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
 		if (cfg[0].user || cfg[1].user)
-			ctrl |= LOONGSON2_PERFCNT_USER;
+			ctrl |= LOONGSON2_PERFCTRL_USER;
 	}
 
 	reg.ctrl = ctrl;
 
 	reg.cnt1_enabled = cfg[0].enabled;
 	reg.cnt2_enabled = cfg[1].enabled;
-
 }
 
-/* Program all of the registers in preparation for enabling profiling.  */
-
 static void loongson2_cpu_setup(void *args)
 {
-	uint64_t perfcount;
-
-	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
-	write_c0_perfcnt(perfcount);
+	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
 }
 
 static void loongson2_cpu_start(void *args)
@@ -115,17 +108,9 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	uint64_t counter, counter1, counter2;
 	struct pt_regs *regs = get_irq_regs();
 	int enabled;
-	unsigned long flags;
-
-	/*
-	 * LOONGSON2 defines two 32-bit performance counters.
-	 * To avoid a race updating the registers we need to stop the counters
-	 * while we're messing with
-	 * them ...
-	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfcnt() & LOONGSON2_PERFCNT_INT_EN;
+	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
 	if (!enabled)
 		return IRQ_NONE;
 	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
@@ -136,8 +121,6 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	counter1 = counter & 0xffffffff;
 	counter2 = counter >> 32;
 
-	spin_lock_irqsave(&sample_lock, flags);
-
 	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
 		if (reg.cnt1_enabled)
 			oprofile_add_sample(regs, 0);
@@ -149,8 +132,6 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 		counter2 = reg.reset_counter2;
 	}
 
-	spin_unlock_irqrestore(&sample_lock, flags);
-
 	write_c0_perfcnt((counter2 << 32) | counter1);
 
 	return IRQ_HANDLED;
@@ -164,7 +145,7 @@ static int __init loongson2_init(void)
 
 static void loongson2_exit(void)
 {
-	write_c0_perfctrl(0);
+	reset_counters(NULL);
 	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
 }
 
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 9553b14..acacd14 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -51,6 +51,67 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
 	 qube_raq_galileo_early_fixup);
 
+static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev,
+						       struct resource *res)
+{
+	struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
+	unsigned long offset = hose->io_offset;
+	struct resource orig = *res;
+
+	if (!(res->flags & IORESOURCE_IO) ||
+	    !(res->flags & IORESOURCE_PCI_FIXED))
+		return;
+
+	res->start -= offset;
+	res->end -= offset;
+	dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n",
+		   &orig, res);
+}
+
+static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev)
+{
+	u32 class;
+	u8 progif;
+
+	/*
+	 * If the IDE controller is in legacy mode, pci_setup_device() fills in
+	 * the resources with the legacy addresses that normally appear on the
+	 * PCI bus, just as if we had read them from a BAR.
+	 *
+	 * However, with the GT-64111, those legacy addresses, e.g., 0x1f0,
+	 * will never appear on the PCI bus because it converts memory accesses
+	 * in the PCI I/O region (which is never at address zero) into I/O port
+	 * accesses with no address translation.
+	 *
+	 * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store
+	 * to physical address 0x100001f0 will become a PCI access to I/O port
+	 * 0x100001f0.  There's no way to generate an access to I/O port 0x1f0,
+	 * but the VT82C586 IDE controller does respond at 0x100001f0 because
+	 * it only decodes the low 24 bits of the address.
+	 *
+	 * When this quirk runs, the pci_dev resources should contain bus
+	 * addresses, not Linux I/O port numbers, so convert legacy addresses
+	 * like 0x1f0 to bus addresses like 0x100001f0.  Later, we'll convert
+	 * them back with pcibios_fixup_bus() or pcibios_bus_to_resource().
+	 */
+	class = dev->class >> 8;
+	if (class != PCI_CLASS_STORAGE_IDE)
+		return;
+
+	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+	if ((progif & 1) == 0) {
+		cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]);
+		cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]);
+	}
+	if ((progif & 4) == 0) {
+		cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]);
+		cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
+	  cobalt_legacy_ide_fixup);
+
 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
 {
 	unsigned short cfgword;
diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c
index caf2ede..4b9768d 100644
--- a/arch/mips/pci/fixup-lemote2f.c
+++ b/arch/mips/pci/fixup-lemote2f.c
@@ -131,7 +131,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
 
 	/* Serial short detect enable */
 	_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
-	_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+	_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 3), lo);
 
 	/* setting the USB2.0 micro frame length */
 	pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
index aa5d3da..d657ee0 100644
--- a/arch/mips/pci/ops-loongson2.c
+++ b/arch/mips/pci/ops-loongson2.c
@@ -1,13 +1,11 @@
 /*
- * fuloong2e specific PCI support.
- *
  * Copyright (C) 1999, 2000, 2004  MIPS Technologies, Inc.
  *	All rights reserved.
  *	Authors: Carsten Langgaard <carstenl@mips.com>
  *		 Maciej W. Rozycki <macro@mips.com>
  *
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -182,15 +180,21 @@ struct pci_ops loongson_pci_ops = {
 };
 
 #ifdef CONFIG_CS5536
+DEFINE_RAW_SPINLOCK(msr_lock);
+
 void _rdmsr(u32 msr, u32 *hi, u32 *lo)
 {
 	struct pci_bus bus = {
 		.number = PCI_BUS_CS5536
 	};
 	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&msr_lock, flags);
 	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
 	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
 	loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+	raw_spin_unlock_irqrestore(&msr_lock, flags);
 }
 EXPORT_SYMBOL(_rdmsr);
 
@@ -200,9 +204,13 @@ void _wrmsr(u32 msr, u32 hi, u32 lo)
 		.number = PCI_BUS_CS5536
 	};
 	u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&msr_lock, flags);
 	loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
 	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
 	loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+	raw_spin_unlock_irqrestore(&msr_lock, flags);
 }
 EXPORT_SYMBOL(_wrmsr);
 #endif
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 32548b5..b7c03d8 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -206,7 +206,7 @@ static void pci_proc_init(void)
 }
 #endif /* CONFIG_PROC_FS && PCI_COUNTERS */
 
-DEFINE_SPINLOCK(bpci_lock);
+static DEFINE_SPINLOCK(bpci_lock);
 
 /*****************************************************************************
  *
@@ -944,6 +944,7 @@ static struct pci_controller msp_pci_controller = {
 	.pci_ops	= &msp_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0,
+	.io_map_base	= MSP_PCI_IOSPACE_BASE,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0
 };
diff --git a/arch/mips/pci/ops-titan-ht.c b/arch/mips/pci/ops-titan-ht.c
index 46c636c..749c192 100644
--- a/arch/mips/pci/ops-titan-ht.c
+++ b/arch/mips/pci/ops-titan-ht.c
@@ -26,7 +26,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <asm/io.h>
 
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
index bea9b6c..455f8e5 100644
--- a/arch/mips/pci/pci-bcm47xx.c
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -57,4 +57,3 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	dev->irq = res;
 	return 0;
 }
-
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 9cb0c80..d248b70 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -209,16 +209,14 @@ const char *octeon_get_pci_interrupts(void)
 	case CVMX_BOARD_TYPE_NAO38:
 		/* This is really the NAC38 */
 		return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA";
-	case CVMX_BOARD_TYPE_THUNDER:
-		return "";
-	case CVMX_BOARD_TYPE_EBH3000:
-		return "";
 	case CVMX_BOARD_TYPE_EBH3100:
 	case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
 	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
 		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
 	case CVMX_BOARD_TYPE_BBGW_REF:
 		return "AABCD";
+	case CVMX_BOARD_TYPE_THUNDER:
+	case CVMX_BOARD_TYPE_EBH3000:
 	default:
 		return "";
 	}
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index ada24e6..1711e8e 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -37,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/io.h>
 
@@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void)
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
-	sb1250_controller.io_map_base = io_map_base;
+	sb1250_controller.io_map_base = (unsigned long)io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
diff --git a/arch/mips/pci/pci-yosemite.c b/arch/mips/pci/pci-yosemite.c
index 0357946..cf5e1a2 100644
--- a/arch/mips/pci/pci-yosemite.c
+++ b/arch/mips/pci/pci-yosemite.c
@@ -54,6 +54,7 @@ static int __init pmc_yosemite_setup(void)
 		panic(ioremap_failed);
 
 	set_io_port_base(io_v_base);
+	py_controller.io_map_base = io_v_base;
 	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
 
 	ioport_resource.end = TITAN_IO_SIZE - 1;
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 9a11c22..38bc280 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -49,8 +49,8 @@ static int pci_initialized;
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
@@ -73,7 +73,7 @@ pcibios_align_resource(void *data, struct resource *res,
 			start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
 	}
 
-	res->start = start;
+	return start;
 }
 
 static void __devinit pcibios_scanbus(struct pci_controller *hose)
@@ -251,8 +251,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		if (!dev->resource[i].start)
 			continue;
-		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
-			continue;
 		if (dev->resource[i].flags & IORESOURCE_IO)
 			offset = hose->io_offset;
 		else if (dev->resource[i].flags & IORESOURCE_MEM)
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
index 5175357..94c9c2c 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c
@@ -131,4 +131,3 @@ void msp_cic_irq_dispatch(void)
 	else
 		do_IRQ(ffs(pending) + intbase - 1);
 }
-
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
index c317a36..db00deb 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
@@ -40,6 +40,7 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -303,12 +304,6 @@ char *prom_getenv(char *env_name)
 }
 
 /* PROM commandline functions */
-char *prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-EXPORT_SYMBOL(prom_getcmdline);
-
 void  __init prom_init_cmdline(void)
 {
 	char *cp;
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index fc990cb..d6f8bdf 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -127,7 +127,7 @@ static int recv_ack(void)
 
 	if (ack) {
 		do_idle();
-		printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM \n");
+		printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM\n");
 		return -1;
 	}
 
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index a312883..d6c7ec4 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -65,4 +65,3 @@
 const char rts = TIOCM_RTS;
 const char dtr = TIOCM_DTR;
 int fd;
-
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 678388f..63be40e 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -26,7 +26,6 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 
@@ -345,14 +344,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
         return pcibios_enable_resources(dev);
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-                            resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
         struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
         if (res->flags & IORESOURCE_IO) {
-                resource_size_t start = res->start;
-
                 /* We need to avoid collisions with `mirrored' VGA ports
                    and other strange ISA hardware, so we always want the
                    addresses kilobyte aligned.  */
@@ -363,8 +361,9 @@ void pcibios_align_resource(void *data, struct resource *res,
                 }
 
                 start = (start + 1024 - 1) & ~(1024 - 1);
-                res->start = start;
         }
+
+	return start;
 }
 
 struct pci_ops titan_pci_ops = {
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 5f673eb..51021cf 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -37,7 +37,6 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/bitops.h>
 #include <asm/bootinfo.h>
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 326fe7a..efc9e88 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -8,7 +8,7 @@
 
 #define LAUNCHSTACK_SIZE 256
 
-static __cpuinitdata DEFINE_SPINLOCK(launch_lock);
+static __cpuinitdata arch_spinlock_t launch_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
 static unsigned long secondary_sp __cpuinitdata;
 static unsigned long secondary_gp __cpuinitdata;
@@ -20,7 +20,7 @@ static void __init prom_smp_bootstrap(void)
 {
 	local_irq_disable();
 
-	while (spin_is_locked(&launch_lock));
+	while (arch_spin_is_locked(&launch_lock));
 
 	__asm__ __volatile__(
 	"	move	$sp, %0		\n"
@@ -37,7 +37,7 @@ static void __init prom_smp_bootstrap(void)
  */
 void __init prom_grab_secondary(void)
 {
-	spin_lock(&launch_lock);
+	arch_spin_lock(&launch_lock);
 
 	pmon_cpustart(1, &prom_smp_bootstrap,
 	              launchstack + LAUNCHSTACK_SIZE, 0);
@@ -138,7 +138,7 @@ static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle)
 	secondary_sp = sp;
 	secondary_gp = gp;
 
-	spin_unlock(&launch_lock);
+	arch_spin_unlock(&launch_lock);
 }
 
 /*
diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c
index 7995df4..26a6ef1 100644
--- a/arch/mips/power/cpu.c
+++ b/arch/mips/power/cpu.c
@@ -3,9 +3,9 @@
  *
  * Licensed under the GPLv2
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
  * Author: Hu Hongbing <huhb@lemote.com>
- *         Wu Zhangjin <wuzj@lemote.com>
+ *         Wu Zhangjin <wuzhangjin@gmail.com>
  */
 #include <asm/suspend.h>
 #include <asm/fpu.h>
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 0cf86fb..dbb5c7b 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -3,9 +3,9 @@
  *
  * Licensed under the GPLv2
  *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
  * Author: Hu Hongbing <huhb@lemote.com>
- *         Wu Zhangjin <wuzj@lemote.com>
+ *         Wu Zhangjin <wuzhangjin@gmail.com>
  */
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 6a88219..9ec523e 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -39,6 +39,7 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/gfp.h>
 #include <asm/page.h>
 #include <linux/swap.h>
 #include <linux/highmem.h>
@@ -340,10 +341,6 @@ static void __init platform_configure_usb(void)
 
 	switch (asic) {
 	case ASIC_ZEUS:
-		fs_update(0x0000, 0x11, 0x02, 0);
-		bcm1_usb2_ctl = 0x803;
-		break;
-
 	case ASIC_CRONUS:
 	case ASIC_CRONUSLITE:
 		fs_update(0x0000, 0x11, 0x02, 0);
@@ -475,6 +472,9 @@ void __init configure_platform(void)
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
 		chipversion  = asic_read(chipver3) << 24;
@@ -487,8 +487,6 @@ void __init configure_platform(void)
 		else
 			asic = ASIC_CRONUSLITE;
 
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
index 80b2eed..529c44a 100644
--- a/arch/mips/powertv/asic/asic_int.c
+++ b/arch/mips/powertv/asic/asic_int.c
@@ -26,7 +26,6 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/kernel.h>
@@ -39,21 +38,21 @@
 
 #include <asm/mach-powertv/asic_regs.h>
 
-static DEFINE_SPINLOCK(asic_irq_lock);
+static DEFINE_RAW_SPINLOCK(asic_irq_lock);
 
 static inline int get_int(void)
 {
 	unsigned long flags;
 	int irq;
 
-	spin_lock_irqsave(&asic_irq_lock, flags);
+	raw_spin_lock_irqsave(&asic_irq_lock, flags);
 
 	irq = (asic_read(int_int_scan) >> 4) - 1;
 
 	if (irq == 0 || irq >= NR_IRQS)
 		irq = -1;
 
-	spin_unlock_irqrestore(&asic_irq_lock, flags);
+	raw_spin_unlock_irqrestore(&asic_irq_lock, flags);
 
 	return irq;
 }
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
index cd5b76a..3fc5d46 100644
--- a/arch/mips/powertv/asic/prealloc-calliope.c
+++ b/arch/mips/powertv/asic/prealloc-calliope.c
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * NON_DVR_CAPABLE CALLIOPE RESOURCES
@@ -32,432 +34,234 @@ struct resource non_dvr_calliope_resources[] __initdata =
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",     	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1,	/*2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",   /*8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00600000 - 1,	/* 6 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * DOCSIS Subsystem
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x22000000,
-		.end    = 0x22700000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x22700000,
-		.end    = 0x23500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23700000,
-		.end    = 0x23720000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 * Add other resources here
+	 * TFTPBuffer
 	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
 	 */
-	{ },
-};
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
 
-struct resource non_dvr_vz_calliope_resources[] __initdata =
-{
 	/*
-	 * VIDEO / LX1
-	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1, /*2 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x22202000,
-		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Sysaudio Driver
-	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x20300000,
-		.end    = 0x20620000-1,  /*3.125 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * GHW HAL Driver
-	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x20100000,
-		.end    = 0x20300000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * multi com buffer area
-	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23900000,
-		.end    = 0x23920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * DMA Ring buffer
-	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Display bins buffer for unit0
-	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * PMEM
-	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Smartcard
-	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * NAND Flash
+	 * Add other resources here
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE+0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+
 	/*
-	 * Synopsys GMAC Memory Region
+	 * End of Resource marker
 	 */
 	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.flags  = 0,
 	},
-	/*
-	 * Add other resources here
-	 */
-	{ },
 };
 
+
 struct resource non_dvr_vze_calliope_resources[] __initdata =
 {
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x22000000,
-		.end    = 0x22200000 - 1,	/*2  Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
-		.start  = 0x22200000,
-		.end    = 0x22202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x22202000,
-		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (10.12MiB) */
+	PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x20396000,
-		.end    = 0x206B6000 - 1,		/* 3.125 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 3.125MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x20100000,
-		.end    = 0x20396000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (2.59MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x206B6000,
-		.end    = 0x206D6000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 * DMA Ring buffer
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE+0x400 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 struct resource non_dvr_vzf_calliope_resources[] __initdata =
@@ -465,156 +269,117 @@ struct resource non_dvr_vzf_calliope_resources[] __initdata =
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/*Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1,	/*2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/*8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		/* ~19.4 (21.5MiB - (2MiB + 8KiB)) */
-		.end    = 0x25580000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00480000 - 1,  /* 4.5 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4.5MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x22700000,
-		.end    = 0x23500000 - 1, /* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23700000,
-		.end    = 0x23720000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,  /* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,  /* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
index 45a5c3e..c532b50 100644
--- a/arch/mips/powertv/asic/prealloc-cronus.c
+++ b/arch/mips/powertv/asic/prealloc-cronus.c
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * DVR_CAPABLE CRONUS RESOURCES
@@ -30,305 +32,161 @@
 struct resource dvr_cronus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "ITFS",
-		.start  = 0x64180000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end    = 0x6430DFFF,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 815,104 bytes each for 2 ITFS partitions. */
+	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
-		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
-		.end    = 0x64AD0000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "AvfsFileSys",
-		.start  = 0x64AD0000,
-		.end    = 0x64AD1000 - 1,  /* 4K */
-		.flags  = IORESOURCE_IO,
-	},
+	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
+		IORESOURCE_MEM)
+
+	/* 4KiB */
+	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
 	 */
-	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 /*
@@ -337,272 +195,146 @@ struct resource dvr_cronus_resources[] __initdata =
 struct resource non_dvr_cronus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
-		.end    = 0x645D2C00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
+	 */
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
+	/*
+	 * NAND Flash
+	 */
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * Add other resources here
+	 */
+
+	/*
+	 * End of Resource marker
 	 */
 	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
+		.flags  = 0,
 	},
-	{ },
 };
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
index 23a9056..b5537e4 100644
--- a/arch/mips/powertv/asic/prealloc-cronuslite.c
+++ b/arch/mips/powertv/asic/prealloc-cronuslite.c
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * NON_DVR_CAPABLE CRONUSLITE RESOURCES
@@ -30,261 +32,143 @@
 struct resource non_dvr_cronuslite_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x63B80000 - 1,  /* 6 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x63B83000,
-		.end    = 0x63B84000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x63B84000,
-		.end    = 0x63E48C00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x63B80000,
-		.end    = 0x63B82800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
 	 */
-	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
index 018d451..96480a2 100644
--- a/arch/mips/powertv/asic/prealloc-zeus.c
+++ b/arch/mips/powertv/asic/prealloc-zeus.c
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * DVR_CAPABLE RESOURCES
@@ -30,280 +32,151 @@
 struct resource dvr_zeus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x20000000,
-		.end    = 0x201FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x20200000,
-		.end    = 0x20201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x20202000,
-		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x30000000,
-		.end    = 0x301FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x30200000,
-		.end    = 0x30201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x30202000,
-		.end    = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00c00000 - 1,	/* 12 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x40100000,
-		.end    = 0x407fffff,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x46900000,
-		.end    = 0x47700000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x47900000,
-		.end    = 0x47920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 2.5MiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,	/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,	/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "ITFS",
-		.start  = 0x00000000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end    = 0x0018DFFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 815,104 bytes each for 2 ITFS partitions. */
+	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-		.end    = 0x007c2000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "AvfsFileSys",
-		.start  = 0x00000000,
-		.end    = 0x00001000 - 1,  /* 4K */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* 4KiB */
+	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
+	 */
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
+	/*
+	 * TFTPBuffer
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 /*
@@ -314,146 +187,118 @@ struct resource non_dvr_zeus_resources[] __initdata =
 	/*
 	 * VIDEO1 / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x20000000,
-		.end    = 0x201FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x20200000,
-		.end    = 0x20201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x20202000,
-		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00600000 - 1,	/* 6 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * DOCSIS Subsystem
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x40100000,
-		.end    = 0x407fffff,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x46900000,
-		.end    = 0x47700000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x47900000,
-		.end    = 0x47920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 2.5MiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff --git a/arch/mips/powertv/asic/prealloc.h b/arch/mips/powertv/asic/prealloc.h
new file mode 100644
index 0000000..8e682df
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc.h
@@ -0,0 +1,70 @@
+/*
+ * Definitions for memory preallocations
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+
+#define KIBIBYTE(n) ((n) * 1024)    /* Number of kibibytes */
+#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
+
+/* "struct resource" array element definition */
+#define PREALLOC(NAME, START, END, FLAGS) {	\
+		.name = (NAME),			\
+		.start = (START),		\
+		.end = (END),			\
+		.flags = (FLAGS)		\
+	},
+
+/* Individual resources in the preallocated resource arrays are defined using
+ *  macros.  These macros are conditionally defined based on their
+ *  corresponding kernel configuration flag:
+ *    - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
+ *    - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
+ *    - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
+ *    - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
+ */
+#ifdef CONFIG_PREALLOC_NORMAL
+#define PREALLOC_NORMAL(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_NORMAL(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_TFTP
+#define PREALLOC_TFTP(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_TFTP(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_DOCSIS
+#define PREALLOC_DOCSIS(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_DOCSIS(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_PMEM
+#define PREALLOC_PMEM(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_PMEM(name, start, end, flags)
+#endif
+#endif
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
index 698b1ea..af2cae0 100644
--- a/arch/mips/powertv/powertv_setup.c
+++ b/arch/mips/powertv/powertv_setup.c
@@ -25,14 +25,15 @@
 #include <linux/etherdevice.h>
 #include <linux/if_ether.h>
 #include <linux/ctype.h>
-
 #include <linux/cpu.h>
+#include <linux/time.h>
+
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/dma.h>
-#include <linux/time.h>
+#include <asm/asm.h>
 #include <asm/traps.h>
 #include <asm/asm-offsets.h>
 #include "reset.h"
@@ -41,26 +42,21 @@
 
 /*
  * Macros for loading addresses and storing registers:
- * PTR_LA	Load the address into a register
- * LONG_S	Store the full width of the given register.
- * LONG_L	Load the full width of the given register
- * PTR_ADDIU	Add a constant value to a register used as a pointer
+ * LONG_L_	Stringified version of LONG_L for use in asm() statement
+ * LONG_S_	Stringified version of LONG_S for use in asm() statement
+ * PTR_LA_	Stringified version of PTR_LA for use in asm() statement
  * REG_SIZE	Number of 8-bit bytes in a full width register
  */
+#define LONG_L_		VAL(LONG_L) " "
+#define LONG_S_		VAL(LONG_S) " "
+#define PTR_LA_		VAL(PTR_LA) " "
+
 #ifdef CONFIG_64BIT
 #warning TODO: 64-bit code needs to be verified
-#define PTR_LA		"dla	"
-#define LONG_S		"sd	"
-#define LONG_L		"ld	"
-#define PTR_ADDIU	"daddiu	"
 #define REG_SIZE	"8"		/* In bytes */
 #endif
 
 #ifdef CONFIG_32BIT
-#define PTR_LA		"la	"
-#define LONG_S		"sw	"
-#define LONG_L		"lw	"
-#define PTR_ADDIU	"addiu	"
 #define REG_SIZE	"4"		/* In bytes */
 #endif
 
@@ -113,9 +109,9 @@ static int panic_handler(struct notifier_block *notifier_block,
 		 * structure. */
 		__asm__ __volatile__ (
 			".set	noat\n"
-			LONG_S		"$at, %[at]\n"
-			LONG_S		"$2, %[v0]\n"
-			LONG_S		"$3, %[v1]\n"
+			LONG_S_		"$at, %[at]\n"
+			LONG_S_		"$2, %[v0]\n"
+			LONG_S_		"$3, %[v1]\n"
 		:
 			[at] "=m" (at),
 			[v0] "=m" (v0),
@@ -129,54 +125,54 @@ static int panic_handler(struct notifier_block *notifier_block,
 			"move		$at, %[pt_regs]\n"
 
 			/* Argument registers */
-			LONG_S		"$4, " VAL(PT_R4) "($at)\n"
-			LONG_S		"$5, " VAL(PT_R5) "($at)\n"
-			LONG_S		"$6, " VAL(PT_R6) "($at)\n"
-			LONG_S		"$7, " VAL(PT_R7) "($at)\n"
+			LONG_S_		"$4, " VAL(PT_R4) "($at)\n"
+			LONG_S_		"$5, " VAL(PT_R5) "($at)\n"
+			LONG_S_		"$6, " VAL(PT_R6) "($at)\n"
+			LONG_S_		"$7, " VAL(PT_R7) "($at)\n"
 
 			/* Temporary regs */
-			LONG_S		"$8, " VAL(PT_R8) "($at)\n"
-			LONG_S		"$9, " VAL(PT_R9) "($at)\n"
-			LONG_S		"$10, " VAL(PT_R10) "($at)\n"
-			LONG_S		"$11, " VAL(PT_R11) "($at)\n"
-			LONG_S		"$12, " VAL(PT_R12) "($at)\n"
-			LONG_S		"$13, " VAL(PT_R13) "($at)\n"
-			LONG_S		"$14, " VAL(PT_R14) "($at)\n"
-			LONG_S		"$15, " VAL(PT_R15) "($at)\n"
+			LONG_S_		"$8, " VAL(PT_R8) "($at)\n"
+			LONG_S_		"$9, " VAL(PT_R9) "($at)\n"
+			LONG_S_		"$10, " VAL(PT_R10) "($at)\n"
+			LONG_S_		"$11, " VAL(PT_R11) "($at)\n"
+			LONG_S_		"$12, " VAL(PT_R12) "($at)\n"
+			LONG_S_		"$13, " VAL(PT_R13) "($at)\n"
+			LONG_S_		"$14, " VAL(PT_R14) "($at)\n"
+			LONG_S_		"$15, " VAL(PT_R15) "($at)\n"
 
 			/* "Saved" registers */
-			LONG_S		"$16, " VAL(PT_R16) "($at)\n"
-			LONG_S		"$17, " VAL(PT_R17) "($at)\n"
-			LONG_S		"$18, " VAL(PT_R18) "($at)\n"
-			LONG_S		"$19, " VAL(PT_R19) "($at)\n"
-			LONG_S		"$20, " VAL(PT_R20) "($at)\n"
-			LONG_S		"$21, " VAL(PT_R21) "($at)\n"
-			LONG_S		"$22, " VAL(PT_R22) "($at)\n"
-			LONG_S		"$23, " VAL(PT_R23) "($at)\n"
+			LONG_S_		"$16, " VAL(PT_R16) "($at)\n"
+			LONG_S_		"$17, " VAL(PT_R17) "($at)\n"
+			LONG_S_		"$18, " VAL(PT_R18) "($at)\n"
+			LONG_S_		"$19, " VAL(PT_R19) "($at)\n"
+			LONG_S_		"$20, " VAL(PT_R20) "($at)\n"
+			LONG_S_		"$21, " VAL(PT_R21) "($at)\n"
+			LONG_S_		"$22, " VAL(PT_R22) "($at)\n"
+			LONG_S_		"$23, " VAL(PT_R23) "($at)\n"
 
 			/* Add'l temp regs */
-			LONG_S		"$24, " VAL(PT_R24) "($at)\n"
-			LONG_S		"$25, " VAL(PT_R25) "($at)\n"
+			LONG_S_		"$24, " VAL(PT_R24) "($at)\n"
+			LONG_S_		"$25, " VAL(PT_R25) "($at)\n"
 
 			/* Kernel temp regs */
-			LONG_S		"$26, " VAL(PT_R26) "($at)\n"
-			LONG_S		"$27, " VAL(PT_R27) "($at)\n"
+			LONG_S_		"$26, " VAL(PT_R26) "($at)\n"
+			LONG_S_		"$27, " VAL(PT_R27) "($at)\n"
 
 			/* Global pointer, stack pointer, frame pointer and
 			 * return address */
-			LONG_S		"$gp, " VAL(PT_R28) "($at)\n"
-			LONG_S		"$sp, " VAL(PT_R29) "($at)\n"
-			LONG_S		"$fp, " VAL(PT_R30) "($at)\n"
-			LONG_S		"$ra, " VAL(PT_R31) "($at)\n"
+			LONG_S_		"$gp, " VAL(PT_R28) "($at)\n"
+			LONG_S_		"$sp, " VAL(PT_R29) "($at)\n"
+			LONG_S_		"$fp, " VAL(PT_R30) "($at)\n"
+			LONG_S_		"$ra, " VAL(PT_R31) "($at)\n"
 
 			/* Now we can get the $at and v0 registers back and
 			 * store them */
-			LONG_L		"$8, %[at]\n"
-			LONG_S		"$8, " VAL(PT_R1) "($at)\n"
-			LONG_L		"$8, %[v0]\n"
-			LONG_S		"$8, " VAL(PT_R2) "($at)\n"
-			LONG_L		"$8, %[v1]\n"
-			LONG_S		"$8, " VAL(PT_R3) "($at)\n"
+			LONG_L_		"$8, %[at]\n"
+			LONG_S_		"$8, " VAL(PT_R1) "($at)\n"
+			LONG_L_		"$8, %[v0]\n"
+			LONG_S_		"$8, " VAL(PT_R2) "($at)\n"
+			LONG_L_		"$8, %[v1]\n"
+			LONG_S_		"$8, " VAL(PT_R3) "($at)\n"
 		:
 		:
 			[at] "m" (at),
@@ -191,8 +187,8 @@ static int panic_handler(struct notifier_block *notifier_block,
 		__asm__ __volatile__ (
 			".set	noat\n"
 		"1:\n"
-			PTR_LA		"$at, 1b\n"
-			LONG_S		"$at, %[cp0_epc]\n"
+			PTR_LA_		"$at, 1b\n"
+			LONG_S_		"$at, %[cp0_epc]\n"
 		:
 			[cp0_epc] "=m" (my_regs.cp0_epc)
 		:
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
index f078820..ea6cec3 100644
--- a/arch/mips/rb532/irq.c
+++ b/arch/mips/rb532/irq.c
@@ -36,7 +36,6 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/delay.h>
 
diff --git a/arch/mips/sgi-ip22/ip22-berr.c b/arch/mips/sgi-ip22/ip22-berr.c
index de6a0cc..911d399 100644
--- a/arch/mips/sgi-ip22/ip22-berr.c
+++ b/arch/mips/sgi-ip22/ip22-berr.c
@@ -89,7 +89,7 @@ static void print_buserr(void)
 void ip22_be_interrupt(int irq)
 {
 	const int field = 2 * sizeof(unsigned long);
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	save_and_clear_buserr();
 	print_buserr();
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 30e12e2..88c684e 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -453,7 +453,7 @@ mips_be_fatal:
 
 void ip22_be_interrupt(int irq)
 {
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	count_be_interrupt++;
 
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index c1c8e40..6a123ea 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/smp.h>
 #include <linux/random.h>
 #include <linux/kernel.h>
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index d9c79d8..c3d30a8 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -133,4 +133,3 @@ pfn_t node_getfirstfree(cnodeid_t cnode)
 		return (KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >>
 								PAGE_SHIFT);
 }
-
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index 6c5a630..bc4fa8d 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -17,11 +17,10 @@
 #endif
 
 #define CNODEID_NONE (cnodeid_t)-1
-#define enter_panic_mode()	spin_lock(&nmi_lock)
 
 typedef unsigned long machreg_t;
 
-DEFINE_SPINLOCK(nmi_lock);
+static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
 /*
  * Lets see what else we need to do here. Set up sp, gp?
@@ -193,9 +192,9 @@ cont_nmi_dump(void)
 	atomic_inc(&nmied_cpus);
 #endif
 	/*
-	 * Use enter_panic_mode to allow only 1 cpu to proceed
+	 * Only allow 1 cpu to proceed
 	 */
-	enter_panic_mode();
+	arch_spin_lock(&nmi_lock);
 
 #ifdef REAL_NMI_SIGNAL
 	/*
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 5c2bf11..eb40824 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -15,7 +15,6 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/random.h>
 #include <linux/sched.h>
@@ -512,10 +511,6 @@ void __init arch_init_irq(void)
 				"level");
 			break;
 
-		case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
-			set_irq_chip_and_handler_name(irq,
-				&crime_edge_interrupt, handle_edge_irq, "edge");
-			break;
 		case CRIME_CPUERR_IRQ:
 		case CRIME_MEMERR_IRQ:
 			set_irq_chip_and_handler_name(irq,
@@ -523,12 +518,9 @@ void __init arch_init_irq(void)
 				"level");
 			break;
 
+		case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
 		case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
 		case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
-			set_irq_chip_and_handler_name(irq,
-				&crime_edge_interrupt, handle_edge_irq, "edge");
-			break;
-
 		case CRIME_VICE_IRQ:
 			set_irq_chip_and_handler_name(irq,
 				&crime_edge_interrupt, handle_edge_irq, "edge");
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 4070268..044bbe4 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -22,7 +22,6 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/kernel_stat.h>
 
 #include <asm/errno.h>
@@ -73,14 +72,14 @@ static struct irq_chip bcm1480_irq_type = {
 /* Store the CPU id (not the logical number) */
 int bcm1480_irq_owner[BCM1480_NR_IRQS];
 
-DEFINE_SPINLOCK(bcm1480_imr_lock);
+static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);
 
 void bcm1480_mask_irq(int cpu, int irq)
 {
 	unsigned long flags, hl_spacing;
 	u64 cur_ints;
 
-	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
 	hl_spacing = 0;
 	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
 		hl_spacing = BCM1480_IMR_HL_SPACING;
@@ -89,7 +88,7 @@ void bcm1480_mask_irq(int cpu, int irq)
 	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
 	cur_ints |= (((u64) 1) << irq);
 	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
-	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 }
 
 void bcm1480_unmask_irq(int cpu, int irq)
@@ -97,7 +96,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
 	unsigned long flags, hl_spacing;
 	u64 cur_ints;
 
-	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
 	hl_spacing = 0;
 	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
 		hl_spacing = BCM1480_IMR_HL_SPACING;
@@ -106,7 +105,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
 	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
 	cur_ints &= ~(((u64) 1) << irq);
 	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
-	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 }
 
 #ifdef CONFIG_SMP
@@ -123,7 +122,7 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = bcm1480_irq_owner[irq];
@@ -148,7 +147,7 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		}
 	}
-	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 
 	return 0;
 }
@@ -254,7 +253,7 @@ void __init init_bcm1480_irqs(void)
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 15ea778..d4ed7a9 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -27,8 +27,6 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 5e7f201..12ac04a 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -22,7 +22,6 @@
 #include <linux/spinlock.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/kernel_stat.h>
 
 #include <asm/errno.h>
@@ -72,20 +71,20 @@ static struct irq_chip sb1250_irq_type = {
 /* Store the CPU id (not the logical number) */
 int sb1250_irq_owner[SB1250_NR_IRQS];
 
-DEFINE_SPINLOCK(sb1250_imr_lock);
+static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);
 
 void sb1250_mask_irq(int cpu, int irq)
 {
 	unsigned long flags;
 	u64 cur_ints;
 
-	spin_lock_irqsave(&sb1250_imr_lock, flags);
+	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
 	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	cur_ints |= (((u64) 1) << irq);
 	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
-	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
 void sb1250_unmask_irq(int cpu, int irq)
@@ -93,13 +92,13 @@ void sb1250_unmask_irq(int cpu, int irq)
 	unsigned long flags;
 	u64 cur_ints;
 
-	spin_lock_irqsave(&sb1250_imr_lock, flags);
+	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
 	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	cur_ints &= ~(((u64) 1) << irq);
 	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
-	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 
 #ifdef CONFIG_SMP
@@ -115,7 +114,7 @@ static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&sb1250_imr_lock, flags);
+	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
@@ -137,7 +136,7 @@ static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	}
-	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 
 	return 0;
 }
@@ -237,7 +236,7 @@ void __init init_sb1250_irqs(void)
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL	K_INT_MAP_I0
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index 0444da1..92da315 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -87,6 +87,21 @@ static int __init setup_bcm1250(void)
 	return ret;
 }
 
+int sb1250_m3_workaround_needed(void)
+{
+	switch (soc_type) {
+	case K_SYS_SOC_TYPE_BCM1250:
+	case K_SYS_SOC_TYPE_BCM1250_ALT:
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:
+	case K_SYS_SOC_TYPE_BCM1125:
+	case K_SYS_SOC_TYPE_BCM1125H:
+		return soc_pass < K_SYS_REVISION_BCM1250_C0;
+
+	default:
+		return 0;
+	}
+}
+
 static int __init setup_bcm112x(void)
 {
 	int ret = 0;
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
index 54847fe..0973352 100644
--- a/arch/mips/sibyte/swarm/platform.c
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -83,3 +83,57 @@ static int __init swarm_pata_init(void)
 device_initcall(swarm_pata_init);
 
 #endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
+
+#define sb1250_dev_struct(num) \
+	static struct resource sb1250_res##num = {		\
+		.name = "SB1250 MAC " __stringify(num),		\
+		.flags = IORESOURCE_MEM,		\
+		.start = A_MAC_CHANNEL_BASE(num),	\
+		.end = A_MAC_CHANNEL_BASE(num + 1) -1,	\
+	};\
+	static struct platform_device sb1250_dev##num = {	\
+		.name = "sb1250-mac",			\
+	.id = num,					\
+	.resource = &sb1250_res##num,			\
+	.num_resources = 1,				\
+	}
+
+sb1250_dev_struct(0);
+sb1250_dev_struct(1);
+sb1250_dev_struct(2);
+sb1250_dev_struct(3);
+
+static struct platform_device *sb1250_devs[] __initdata = {
+	&sb1250_dev0,
+	&sb1250_dev1,
+	&sb1250_dev2,
+	&sb1250_dev3,
+};
+
+static int __init sb1250_device_init(void)
+{
+	int ret;
+
+	/* Set the number of available units based on the SOC type.  */
+	switch (soc_type) {
+	case K_SYS_SOC_TYPE_BCM1250:
+	case K_SYS_SOC_TYPE_BCM1250_ALT:
+		ret = platform_add_devices(sb1250_devs, 3);
+		break;
+	case K_SYS_SOC_TYPE_BCM1120:
+	case K_SYS_SOC_TYPE_BCM1125:
+	case K_SYS_SOC_TYPE_BCM1125H:
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:       /* Hybrid */
+		ret = platform_add_devices(sb1250_devs, 2);
+		break;
+	case K_SYS_SOC_TYPE_BCM1x55:
+	case K_SYS_SOC_TYPE_BCM1x80:
+		ret = platform_add_devices(sb1250_devs, 4);
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+	return ret;
+}
+device_initcall(sb1250_device_init);
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 5277aac..c308989 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -145,15 +145,14 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,           /* orig-x, orig-y */
-		0,              /* unused */
-		52,             /* orig_video_page */
-		3,              /* orig_video_mode */
-		80,             /* orig_video_cols */
-		4626, 3, 9,     /* unused, ega_bx, unused */
-		25,             /* orig_video_lines */
-		0x22,           /* orig_video_isVGA */
-		16              /* orig_video_points */
+		.orig_video_page	= 52,
+		.orig_video_mode	= 3,
+		.orig_video_cols	= 80,
+		.flags			= 12,
+		.orig_video_ega_bx	= 3,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= 0x22,
+		.orig_video_points	= 16,
        };
        /* XXXKW for CFE, get lines/cols from environment */
 #endif
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 46f0069..90c558f 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -132,7 +132,7 @@ device_initcall(snirm_setup_devinit);
  * readb/writeb to access them
  */
 
-DEFINE_SPINLOCK(sni_rm200_i8259A_lock);
+static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
 #define PIC_CMD    0x00
 #define PIC_IMR    0x01
 #define PIC_ISR    PIC_CMD
@@ -161,13 +161,13 @@ static void sni_rm200_disable_8259A_irq(unsigned int irq)
 
 	irq -= RM200_I8259A_IRQ_BASE;
 	mask = 1 << irq;
-	spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+	raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
 	rm200_cached_irq_mask |= mask;
 	if (irq & 8)
 		writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
 	else
 		writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
-	spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
 }
 
 static void sni_rm200_enable_8259A_irq(unsigned int irq)
@@ -177,13 +177,13 @@ static void sni_rm200_enable_8259A_irq(unsigned int irq)
 
 	irq -= RM200_I8259A_IRQ_BASE;
 	mask = ~(1 << irq);
-	spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+	raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
 	rm200_cached_irq_mask &= mask;
 	if (irq & 8)
 		writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
 	else
 		writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
-	spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
 }
 
 static inline int sni_rm200_i8259A_irq_real(unsigned int irq)
@@ -216,7 +216,7 @@ void sni_rm200_mask_and_ack_8259A(unsigned int irq)
 
 	irq -= RM200_I8259A_IRQ_BASE;
 	irqmask = 1 << irq;
-	spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+	raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
 	/*
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
@@ -247,7 +247,7 @@ handle_real_irq:
 		writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
 		writeb(0x60+irq, rm200_pic_master + PIC_CMD);
 	}
-	spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
 	return;
 
 spurious_8259A_irq:
@@ -298,7 +298,7 @@ static inline int sni_rm200_i8259_irq(void)
 {
 	int irq;
 
-	spin_lock(&sni_rm200_i8259A_lock);
+	raw_spin_lock(&sni_rm200_i8259A_lock);
 
 	/* Perform an interrupt acknowledge cycle on controller 1. */
 	writeb(0x0C, rm200_pic_master + PIC_CMD);	/* prepare for poll */
@@ -325,7 +325,7 @@ static inline int sni_rm200_i8259_irq(void)
 			irq = -1;
 	}
 
-	spin_unlock(&sni_rm200_i8259A_lock);
+	raw_spin_unlock(&sni_rm200_i8259A_lock);
 
 	return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq;
 }
@@ -334,7 +334,7 @@ void sni_rm200_init_8259A(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+	raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
 
 	writeb(0xff, rm200_pic_master + PIC_IMR);
 	writeb(0xff, rm200_pic_slave + PIC_IMR);
@@ -352,7 +352,7 @@ void sni_rm200_init_8259A(void)
 	writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
 	writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
 
-	spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
 }
 
 /*
@@ -404,7 +404,7 @@ void __init sni_rm200_i8259_irqs(void)
 	if (!rm200_pic_master)
 		return;
 	rm200_pic_slave = ioremap_nocache(0x160000a0, 4);
-	if (!rm200_pic_master) {
+	if (!rm200_pic_slave) {
 		iounmap(rm200_pic_master);
 		return;
 	}
diff --git a/arch/mips/txx9/generic/7segled.c b/arch/mips/txx9/generic/7segled.c
index 727ab21..7f8416f 100644
--- a/arch/mips/txx9/generic/7segled.c
+++ b/arch/mips/txx9/generic/7segled.c
@@ -58,13 +58,16 @@ static ssize_t raw_store(struct sys_device *dev,
 static SYSDEV_ATTR(ascii, 0200, NULL, ascii_store);
 static SYSDEV_ATTR(raw, 0200, NULL, raw_store);
 
-static ssize_t map_seg7_show(struct sysdev_class *class, char *buf)
+static ssize_t map_seg7_show(struct sysdev_class *class,
+			     struct sysdev_class_attribute *attr,
+			     char *buf)
 {
 	memcpy(buf, &txx9_seg7map, sizeof(txx9_seg7map));
 	return sizeof(txx9_seg7map);
 }
 
 static ssize_t map_seg7_store(struct sysdev_class *class,
+			      struct sysdev_class_attribute *attr,
 			      const char *buf, size_t size)
 {
 	if (size != sizeof(txx9_seg7map))
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 707cfa9..9a0be81 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -20,6 +20,7 @@
 #include <asm/txx9/pci.h>
 #ifdef CONFIG_TOSHIBA_FPCIB0
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <asm/i8259.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 #endif
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index e27809b..575d219b 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 #include <linux/sysdev.h>
+#include <linux/slab.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/reboot.h>
@@ -399,11 +400,6 @@ const char *get_system_type(void)
 	return txx9_system_type;
 }
 
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
 const char *__init prom_getenv(const char *name)
 {
 	const s32 *str;
@@ -909,7 +905,7 @@ struct txx9_sramc_sysdev {
 	void __iomem *base;
 };
 
-static ssize_t txx9_sram_read(struct kobject *kobj,
+static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj,
 			      struct bin_attribute *bin_attr,
 			      char *buf, loff_t pos, size_t size)
 {
@@ -924,7 +920,7 @@ static ssize_t txx9_sram_read(struct kobject *kobj,
 	return size;
 }
 
-static ssize_t txx9_sram_write(struct kobject *kobj,
+static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj,
 			       struct bin_attribute *bin_attr,
 			       char *buf, loff_t pos, size_t size)
 {
@@ -961,6 +957,7 @@ void __init txx9_sramc_init(struct resource *r)
 	if (!dev->base)
 		goto exit;
 	dev->dev.cls = &txx9_sramc_sysdev_class;
+	sysfs_bin_attr_init(&dev->bindata_attr);
 	dev->bindata_attr.attr.name = "bindata";
 	dev->bindata_attr.attr.mode = S_IRUSR | S_IWUSR;
 	dev->bindata_attr.read = txx9_sram_read;
diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c
index 75c3472..103abc1 100644
--- a/arch/mips/txx9/generic/spi_eeprom.c
+++ b/arch/mips/txx9/generic/spi_eeprom.c
@@ -10,6 +10,7 @@
  * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
  */
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 25e50a7..3206f76 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -67,8 +67,6 @@ static void jmr3927_board_init(void);
 
 static void __init jmr3927_mem_setup(void)
 {
-	char *argptr;
-
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
@@ -97,11 +95,6 @@ static void __init jmr3927_mem_setup(void)
 	jmr3927_board_init();
 
 	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-	argptr = prom_getcmdline();
-	if (!strstr(argptr, "console="))
-		strcat(argptr, " console=ttyS1,115200");
-#endif
 }
 
 static void __init jmr3927_pci_setup(void)
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index ee468ea..b15adfc 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -187,8 +187,6 @@ static void __init rbtx4937_clock_init(void);
 
 static void __init rbtx4927_mem_setup(void)
 {
-	char *argptr;
-
 	if (TX4927_REV_PCODE() == 0x4927) {
 		rbtx4927_clock_init();
 		tx4927_setup();
@@ -213,11 +211,6 @@ static void __init rbtx4927_mem_setup(void)
 	gpio_direction_output(15, 1);
 
 	tx4927_sio_init(0, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-	argptr = prom_getcmdline();
-	if (!strstr(argptr, "console="))
-		strcat(argptr, " console=ttyS0,38400");
-#endif
 }
 
 static void __init rbtx4927_clock_init(void)
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index d66509b..d6e70da 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -153,7 +153,6 @@ static void __init rbtx4938_time_init(void)
 static void __init rbtx4938_mem_setup(void)
 {
 	unsigned long long pcfg;
-	char *argptr;
 
 	if (txx9_master_clock == 0)
 		txx9_master_clock = 25000000; /* 25MHz */
@@ -168,11 +167,6 @@ static void __init rbtx4938_mem_setup(void)
 #endif
 
 	tx4938_sio_init(7372800, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-	argptr = prom_getcmdline();
-	if (!strstr(argptr, "console="))
-		strcat(argptr, " console=ttyS0,38400");
-#endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
 	pr_info("PIOSEL: disabling both ATA and NAND selection\n");
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index b0c241e..7dc0faf 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/interrupt.h>
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 89faaca..1c4565a 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -37,6 +37,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
+config GENERIC_CMOS_UPDATE
+        def_bool y
+
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
index 5bf5be9..f0cc1f8 100644
--- a/arch/mn10300/include/asm/atomic.h
+++ b/arch/mn10300/include/asm/atomic.h
@@ -1,157 +1 @@
-/* MN10300 Atomic counter operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ATOMIC_H
-#define _ASM_ATOMIC_H
-
-#ifdef CONFIG_SMP
-#error not SMP safe
-#endif
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.  Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_read(v)	((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.  Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#include <asm/system.h>
-
-/**
- * atomic_add_return - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int temp;
-
-	local_irq_save(flags);
-	temp = v->counter;
-	temp += i;
-	v->counter = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-/**
- * atomic_sub_return - subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int temp;
-
-	local_irq_save(flags);
-	temp = v->counter;
-	temp -= i;
-	v->counter = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	return atomic_add_return(i, v) < 0;
-}
-
-static inline void atomic_add(int i, atomic_t *v)
-{
-	atomic_add_return(i, v);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	atomic_sub_return(i, v);
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
-	atomic_add_return(1, v);
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
-	atomic_sub_return(1, v);
-}
-
-#define atomic_dec_return(v)		atomic_sub_return(1, (v))
-#define atomic_inc_return(v)		atomic_add_return(1, (v))
-
-#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
-
-#define atomic_add_unless(v, a, u)				\
-({								\
-	int c, old;						\
-	c = atomic_read(v);					\
-	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
-		c = old;					\
-	c != (u);						\
-})
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	mask = ~mask;
-	local_irq_save(flags);
-	*addr &= mask;
-	local_irq_restore(flags);
-}
-
-#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
-#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
-
-/* Atomic operations are already serializing on MN10300??? */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_ATOMIC_H */
+#include <asm-generic/atomic.h>
diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h
index e03cfa2..6e2fe28 100644
--- a/arch/mn10300/include/asm/cache.h
+++ b/arch/mn10300/include/asm/cache.h
@@ -21,6 +21,8 @@
 #define L1_CACHE_DISPARITY	L1_CACHE_NENTRIES * L1_CACHE_BYTES
 #endif
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 /* data cache purge registers
  * - read from the register to unconditionally purge that cache line
  * - write address & 0xffffff00 to conditionally purge that cache line
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
index ccae8f6..4ed1522 100644
--- a/arch/mn10300/include/asm/dma-mapping.h
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -17,6 +17,11 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 
+/*
+ * See Documentation/DMA-API.txt for the description of how the
+ * following DMA API should work.
+ */
+
 extern void *dma_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, int flag);
 
@@ -26,13 +31,6 @@ extern void dma_free_coherent(struct device *dev, size_t size,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
 #define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
 
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.  The
- * 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory until
- * either pci_unmap_single or pci_dma_sync_single is performed.
- */
 static inline
 dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 			  enum dma_data_direction direction)
@@ -42,14 +40,6 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 	return virt_to_bus(ptr);
 }
 
-/*
- * Unmap a single streaming mode DMA translation.  The dma_addr and size must
- * match what was provided for in a previous pci_map_single call.  All other
- * usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
 static inline
 void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		      enum dma_data_direction direction)
@@ -57,20 +47,6 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scather-gather version of the above pci_map_single interface.
- * Here the scatter gather list elements are each tagged with the appropriate
- * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of DMA
- *       address/length pairs than there are SG table elements.  (for example
- *       via virtual mapping capabilities) The routine returns the number of
- *       addr/length pairs actually used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are the same
- * here.
- */
 static inline
 int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	       enum dma_data_direction direction)
@@ -91,11 +67,6 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	return nents;
 }
 
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
 static inline
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 		  enum dma_data_direction direction)
@@ -103,10 +74,6 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	BUG_ON(!valid_dma_direction(direction));
 }
 
-/*
- * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
- * to pci_map_single, but takes a struct page instead of a virtual address
- */
 static inline
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 			unsigned long offset, size_t size,
@@ -123,15 +90,6 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	BUG_ON(direction == DMA_NONE);
 }
 
-/*
- * Make physical memory consistent for a single streaming mode DMA translation
- * after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the buffer using
- * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
- * function before doing so.  At the next point you give the PCI dma address
- * back to the card, the device again owns the buffer.
- */
 static inline
 void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 			     size_t size, enum dma_data_direction direction)
@@ -161,13 +119,6 @@ dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
 }
 
 
-/*
- * Make physical memory consistent for a set of streaming mode DMA translations
- * after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list, same rules
- * and usage.
- */
 static inline
 void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 			 int nelems, enum dma_data_direction direction)
@@ -187,12 +138,6 @@ int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 	return 0;
 }
 
-/*
- * Return whether the given PCI device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits during
- * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
- * function.
- */
 static inline
 int dma_supported(struct device *dev, u64 mask)
 {
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
index 6dc30fc..16d8857 100644
--- a/arch/mn10300/include/asm/pgtable.h
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -466,7 +466,7 @@ static inline int set_kernel_exec(unsigned long vaddr, int enable)
  * the kernel page tables containing the necessary information by tlb-mn10300.S
  */
 extern void update_mmu_cache(struct vm_area_struct *vma,
-			     unsigned long address, pte_t pte);
+			     unsigned long address, pte_t *ptep);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 1b0ba5e..7c2e911 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -99,8 +99,6 @@ struct task_struct;
 extern void show_regs(struct pt_regs *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
 
 #endif  /*  !__ASSEMBLY  */
 
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
index 6753590..7bd00b9 100644
--- a/arch/mn10300/include/asm/scatterlist.h
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -11,45 +11,8 @@
 #ifndef _ASM_SCATTERLIST_H
 #define _ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_page(virt_to_page(some_ptr));
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* for highmem, page offset */
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 #endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 58d64f8..2001cb6 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -148,7 +148,7 @@ static inline unsigned long current_stack_pointer(void)
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17	/* OOM killer killed process */
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	+(1 << TIF_SYSCALL_TRACE)
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index c05acb9..9d056f5 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -363,6 +363,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -375,6 +376,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 88e3e1c..d9ed5a1 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -468,7 +468,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index ec8a21d..82b817c 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -18,7 +18,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -26,6 +25,7 @@
 #include <linux/percpu.h>
 #include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
diff --git a/arch/mn10300/kernel/rtc.c b/arch/mn10300/kernel/rtc.c
index 7978470..815a933 100644
--- a/arch/mn10300/kernel/rtc.c
+++ b/arch/mn10300/kernel/rtc.c
@@ -26,17 +26,15 @@ static long last_rtc_update;
 /* time for RTC to update itself in ioclks */
 static unsigned long mn10300_rtc_update_period;
 
-/*
- * read the current RTC time
- */
-unsigned long __init get_initial_rtc_time(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time tm;
 
 	get_rtc_time(&tm);
 
-	return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+	ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
 		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+	ts->tv_nsec = 0;
 }
 
 /*
@@ -110,24 +108,9 @@ static int set_rtc_mmss(unsigned long nowtime)
 	return retval;
 }
 
-void check_rtc_time(void)
+int update_persistent_clock(struct timespec now)
 {
-	/* the RTC clock just finished ticking over again this second
-	 * - if we have an externally synchronized Linux clock, then update
-	 *   RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
-	 *   called as close as possible to 500 ms before the new second starts.
-	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
-	    ) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
+	return set_rtc_mms(now.tv_sec);
 }
 
 /*
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 3f24c29..d464aff 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -15,7 +15,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 17cc6ce..815f135 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -31,109 +31,3 @@ asmlinkage long old_mmap(unsigned long addr, unsigned long len,
 		return -EINVAL;
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
 }
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set *inp;
-	fd_set *outp;
-	fd_set *exp;
-	struct timeval *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage long sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      second,
-				      (const struct timespec __user *)fifth);
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				  second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					  tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					  (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second,
-				   (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second,
-				       &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat(first, (char __user *) ptr, second,
-					(ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				  (struct shmid_ds __user *) ptr);
-	default:
-		return -EINVAL;
-	}
-}
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index 395caf0..8f7f6d2 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -111,7 +111,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 		/* advance the kernel's time tracking system */
 		profile_tick(CPU_PROFILING);
 		do_timer(1);
-		check_rtc_time();
 	}
 
 	write_sequnlock(&xtime_lock);
@@ -139,9 +138,6 @@ void __init time_init(void)
 	       " (calibrated against RTC)\n",
 	       MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
 
-	xtime.tv_sec = get_initial_rtc_time();
-	xtime.tv_nsec = 0;
-
 	mn10300_last_tsc = TMTSCBC;
 
 	/* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index ee82d62..4e34880 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/pci.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 
 static unsigned long pci_sram_allocated = 0xbc000000;
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 53bb17d..81f153f 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -338,11 +338,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	monitor_signal(regs);
-	printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
-	if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
-		do_exit(SIGKILL);
-	goto no_context;
+	if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index dd27a9a..6e6bc0e 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 #include <linux/ptrace.h>
 #include <linux/mman.h>
-#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
@@ -27,6 +26,7 @@
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 
 #include <asm/processor.h>
 #include <asm/system.h>
diff --git a/arch/mn10300/mm/mmu-context.c b/arch/mn10300/mm/mmu-context.c
index 31c9d27..36ba021 100644
--- a/arch/mn10300/mm/mmu-context.c
+++ b/arch/mn10300/mm/mmu-context.c
@@ -51,9 +51,10 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 /*
  * preemptively set a TLB entry
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
 {
 	unsigned long pteu, ptel, cnx, flags;
+	pte_t pte = *ptep;
 
 	addr &= PAGE_MASK;
 	ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index baffc58..9c1624c 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -12,11 +12,11 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/highmem.h>
-#include <linux/slab.h>
 #include <linux/pagemap.h>
 #include <linux/spinlock.h>
 #include <linux/quicklist.h>
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c
index 78cd134..45b40ac 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.c
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.c
@@ -31,9 +31,11 @@
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	resource_size_t start = res->start;
+
 #if 0
 	struct pci_dev *dev = data;
 
@@ -47,14 +49,10 @@ void pcibios_align_resource(void *data, struct resource *res,
 	       );
 #endif
 
-	if (res->flags & IORESOURCE_IO) {
-		unsigned long start = res->start;
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
 
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
+	return start;
 }
 
 
@@ -119,6 +117,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range. */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
index 58cfb44..91212ea 100644
--- a/arch/mn10300/unit-asb2305/pci-irq.c
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/io.h>
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 2cb7e75..6d8720a 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -331,12 +331,10 @@ static int __init pci_check_direct(void)
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
 	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-	struct resource *devr = &dev->resource[idx];
+	struct resource *devr = &dev->resource[idx], *busr;
 
 	if (dev->bus) {
-		for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-			struct resource *busr = dev->bus->resource[i];
-
+		pci_bus_for_each_resource(dev->bus, busr, i) {
 			if (!busr || (busr->flags ^ devr->flags) & type_mask)
 				continue;
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 524d935..05a366a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,7 +18,6 @@ config PARISC
 	select BUG
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
-	select HAVE_ARCH_TRACEHOOK
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
@@ -96,6 +95,12 @@ config PM
 config STACKTRACE_SUPPORT
 	def_bool y
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config ISA_DMA_API
 	bool
 
diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug
index bc989e5..7305ac8 100644
--- a/arch/parisc/Kconfig.debug
+++ b/arch/parisc/Kconfig.debug
@@ -12,4 +12,18 @@ config DEBUG_RODATA
          portion of the kernel code won't be covered by a TLB anymore.
          If in doubt, say "N".
 
+config DEBUG_STRICT_USER_COPY_CHECKS
+	bool "Strict copy size checks"
+	depends on DEBUG_KERNEL && !TRACE_BRANCH_PROFILING
+	---help---
+	  Enabling this option turns a certain set of sanity checks for user
+	  copy operations into compile time failures.
+
+	  The copy_from_user() etc checks are there to help test if there
+	  are sufficient security checks on the length argument of
+	  the copy operation, by having gcc prove that the argument is
+	  within bounds.
+
+	  If unsure, or if you run an older (pre 4.4) gcc, say N.
+
 endmenu
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 5407536..6935123 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -26,8 +26,8 @@
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/file.h>
-#include <linux/slab.h>
 #include <linux/ptrace.h>
+#include <linux/slab.h>
 #include <asm/errno.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 716634d..f819559 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -189,7 +189,7 @@ static __inline__ void atomic_set(atomic_t *v, int i)
 
 static __inline__ int atomic_read(const atomic_t *v)
 {
-	return v->counter;
+	return (*(volatile int *)&(v)->counter);
 }
 
 /* exported interface */
@@ -286,7 +286,7 @@ atomic64_set(atomic64_t *v, s64 i)
 static __inline__ s64
 atomic64_read(const atomic64_t *v)
 {
-	return v->counter;
+	return (*(volatile long *)&(v)->counter);
 }
 
 #define atomic64_add(i,v)	((void)(__atomic64_add_return( ((s64)(i)),(v))))
diff --git a/arch/parisc/include/asm/bug.h b/arch/parisc/include/asm/bug.h
index 75e46c5..72cfdb0 100644
--- a/arch/parisc/include/asm/bug.h
+++ b/arch/parisc/include/asm/bug.h
@@ -44,7 +44,7 @@
 #endif
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
-#define __WARN()							\
+#define __WARN_TAINT(taint)						\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
@@ -54,11 +54,11 @@
 			     "\t.org 2b+%c3\n"				\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
-			     "i" (BUGFLAG_WARNING),			\
+			     "i" (BUGFLAG_TAINT(taint)), 		\
 			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #else
-#define __WARN()							\
+#define __WARN_TAINT(taint)						\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
@@ -67,7 +67,7 @@
 			     "\t.short %c0\n"				\
 			     "\t.org 2b+%c1\n"				\
 			     "\t.popsection"				\
-			     : : "i" (BUGFLAG_WARNING),			\
+			     : : "i" (BUGFLAG_TAINT(taint)),		\
 			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #endif
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 7a73b61..4556d82 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -2,6 +2,7 @@
 #define _PARISC_CACHEFLUSH_H
 
 #include <linux/mm.h>
+#include <linux/uaccess.h>
 
 /* The usual comment is "Caches aren't brain-dead on the <architecture>".
  * Unfortunately, that doesn't apply to PA-RISC. */
@@ -38,6 +39,18 @@ void flush_cache_mm(struct mm_struct *mm);
 
 #define flush_kernel_dcache_range(start,size) \
 	flush_kernel_dcache_range_asm((start), (start)+(size));
+/* vmap range flushes and invalidates.  Architecturally, we don't need
+ * the invalidate, because the CPU should refuse to speculate once an
+ * area has been flushed, so invalidate is left empty */
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+	unsigned long start = (unsigned long)vaddr;
+
+	flush_kernel_dcache_range_asm(start, start + size);
+}
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+}
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
@@ -113,11 +126,20 @@ static inline void *kmap(struct page *page)
 
 #define kunmap(page)			kunmap_parisc(page_address(page))
 
-#define kmap_atomic(page, idx)		page_address(page)
+static inline void *kmap_atomic(struct page *page, enum km_type idx)
+{
+	pagefault_disable();
+	return page_address(page);
+}
 
-#define kunmap_atomic(addr, idx)	kunmap_parisc(addr)
+static inline void kunmap_atomic(void *addr, enum km_type idx)
+{
+	kunmap_parisc(addr);
+	pagefault_enable();
+}
 
-#define kmap_atomic_pfn(pfn, idx)	page_address(pfn_to_page(pfn))
+#define kmap_atomic_prot(page, idx, prot)	kmap_atomic(page, idx)
+#define kmap_atomic_pfn(pfn, idx)	kmap_atomic(pfn_to_page(pfn), (idx))
 #define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
 #endif
 
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 7f32611..02b77ba 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/sched.h>
 #include <linux/thread_info.h>
 
-#define COMPAT_USER_HZ 100
+#define COMPAT_USER_HZ 		100
+#define COMPAT_UTS_MACHINE	"parisc\0\0"
 
 typedef u32	compat_size_t;
 typedef s32	compat_ssize_t;
diff --git a/arch/parisc/include/asm/param.h b/arch/parisc/include/asm/param.h
index 32e03d8..965d454 100644
--- a/arch/parisc/include/asm/param.h
+++ b/arch/parisc/include/asm/param.h
@@ -1,22 +1 @@
-#ifndef _ASMPARISC_PARAM_H
-#define _ASMPARISC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ
-#define USER_HZ		100		/* some user API use "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif
+#include <asm-generic/param.h>
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 64c7aa5..2242a5c 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -183,20 +183,6 @@ struct pci_bios_ops {
 	void (*fixup_bus)(struct pci_bus *bus);
 };
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /*
 ** Stuff declared in arch/parisc/kernel/pci.c
 */
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index a27d2e2..01c1503 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -410,7 +410,7 @@ extern void paging_init (void);
 
 #define PG_dcache_dirty         PG_arch_1
 
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
 
 /* Encode and de-code a swap entry */
 
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index aead40b..7f09533 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -47,13 +47,8 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
-struct task_struct;
 #define arch_has_single_step()	1
-void user_disable_single_step(struct task_struct *task);
-void user_enable_single_step(struct task_struct *task);
-
 #define arch_has_block_step()	1
-void user_enable_block_step(struct task_struct *task);
 
 /* XXX should we use iaoq[1] or iaoq[0] ? */
 #define user_mode(regs)			(((regs)->iaoq[0] & 3) ? 1 : 0)
diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h
index 62269b3..2c3b79b 100644
--- a/arch/parisc/include/asm/scatterlist.h
+++ b/arch/parisc/include/asm/scatterlist.h
@@ -3,25 +3,9 @@
 
 #include <asm/page.h>
 #include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-
-	unsigned int length;
-
-	/* an IOVA can be 64-bits on some PA-Risc platforms. */
-	dma_addr_t iova;	/* I/O Virtual Address */
-	__u32      iova_length; /* bytes mapped */
-};
-
-#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
-#define sg_dma_address(sg) ((sg)->iova)
-#define sg_dma_len(sg)     ((sg)->iova_length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (~0UL)
+#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
 
 #endif /* _ASM_PARISC_SCATTERLIST_H */
diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index 4bbb673..2ab4af5 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -160,7 +160,7 @@ static inline void set_eiem(unsigned long val)
    ldcd). */
 
 #define __PA_LDCW_ALIGNMENT	4
-#define __ldcw_align(a) ((volatile unsigned int *)a)
+#define __ldcw_align(a) (&(a)->slock)
 #define __LDCW	"ldcw,co"
 
 #endif /*!CONFIG_PA20*/
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 7ecc103..aa8de72 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -56,7 +56,7 @@ struct thread_info {
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_32BIT               4       /* 32 bit binary */
-#define TIF_MEMDIE		5
+#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_FREEZE		7	/* is freezing for suspend */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 7cf799d..ff4cf9d 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -7,6 +7,7 @@
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/cache.h>
+#include <asm/errno.h>
 #include <asm-generic/uaccess-unaligned.h>
 
 #define VERIFY_READ 0
@@ -234,13 +235,35 @@ extern long lstrnlen_user(const char __user *,long);
 
 unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len);
 #define __copy_to_user copy_to_user
-unsigned long copy_from_user(void *dst, const void __user *src, unsigned long len);
-#define __copy_from_user copy_from_user
+unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len);
 unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len);
 #define __copy_in_user copy_in_user
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
+extern void copy_from_user_overflow(void)
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+        __compiletime_error("copy_from_user() buffer size is not provably correct")
+#else
+        __compiletime_warning("copy_from_user() buffer size is not provably correct")
+#endif
+;
+
+static inline unsigned long __must_check copy_from_user(void *to,
+                                          const void __user *from,
+                                          unsigned long n)
+{
+        int sz = __compiletime_object_size(to);
+        int ret = -EFAULT;
+
+        if (likely(sz == -1 || !__builtin_constant_p(n) || sz >= n))
+                ret = __copy_from_user(to, from, n);
+        else
+                copy_from_user_overflow();
+
+        return ret;
+}
+
 struct pt_regs;
 int fixup_exception(struct pt_regs *regs);
 
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index cda1583..1ce7d28 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -811,8 +811,10 @@
 #define __NR_pwritev		(__NR_Linux + 316)
 #define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
 #define __NR_perf_event_open	(__NR_Linux + 318)
+#define __NR_recvmmsg		(__NR_Linux + 319)
+#define __NR_accept4		(__NR_Linux + 320)
 
-#define __NR_Linux_syscalls	(__NR_perf_event_open + 1)
+#define __NR_Linux_syscalls	(__NR_accept4 + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index ec787b4..dcd5510 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -45,8 +45,12 @@
 #else
 #define FRAME_SIZE	64
 #endif
+#define FRAME_ALIGN	64
 
-#define align(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
+/* Add FRAME_SIZE to the size x and align it to y. All definitions
+ * that use align_frame will include space for a frame.
+ */
+#define align_frame(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
 
 int main(void)
 {
@@ -146,7 +150,8 @@ int main(void)
 	DEFINE(TASK_PT_IOR, offsetof(struct task_struct, thread.regs.ior));
 	BLANK();
 	DEFINE(TASK_SZ, sizeof(struct task_struct));
-	DEFINE(TASK_SZ_ALGN, align(sizeof(struct task_struct), 64));
+	/* TASK_SZ_ALGN includes space for a stack frame. */
+	DEFINE(TASK_SZ_ALGN, align_frame(sizeof(struct task_struct), FRAME_ALIGN));
 	BLANK();
 	DEFINE(PT_PSW, offsetof(struct pt_regs, gr[ 0]));
 	DEFINE(PT_GR1, offsetof(struct pt_regs, gr[ 1]));
@@ -233,7 +238,8 @@ int main(void)
 	DEFINE(PT_ISR, offsetof(struct pt_regs, isr));
 	DEFINE(PT_IOR, offsetof(struct pt_regs, ior));
 	DEFINE(PT_SIZE, sizeof(struct pt_regs));
-	DEFINE(PT_SZ_ALGN, align(sizeof(struct pt_regs), 64));
+	/* PT_SZ_ALGN includes space for a stack frame. */
+	DEFINE(PT_SZ_ALGN, align_frame(sizeof(struct pt_regs), FRAME_ALIGN));
 	BLANK();
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
@@ -242,7 +248,8 @@ int main(void)
 	DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(THREAD_SZ, sizeof(struct thread_info));
-	DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64));
+	/* THREAD_SZ_ALGN includes space for a stack frame. */
+	DEFINE(THREAD_SZ_ALGN, align_frame(sizeof(struct thread_info), FRAME_ALIGN));
 	BLANK();
 	DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base));
 	DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride));
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index b6ed34d..d054f3d 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -68,9 +68,9 @@ flush_cache_all_local(void)
 EXPORT_SYMBOL(flush_cache_all_local);
 
 void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
-	struct page *page = pte_page(pte);
+	struct page *page = pte_page(*ptep);
 
 	if (pfn_valid(page_to_pfn(page)) && page_mapping(page) &&
 	    test_bit(PG_dcache_dirty, &page->flags)) {
@@ -171,14 +171,14 @@ parisc_cache_init(void)
 		cache_info.ic_conf.cc_cst,
 		cache_info.ic_conf.cc_hv);
 
-	printk("D-TLB conf: sh %d page %d cst %d aid %d pad1 %d \n",
+	printk("D-TLB conf: sh %d page %d cst %d aid %d pad1 %d\n",
 		cache_info.dt_conf.tc_sh,
 		cache_info.dt_conf.tc_page,
 		cache_info.dt_conf.tc_cst,
 		cache_info.dt_conf.tc_aid,
 		cache_info.dt_conf.tc_pad1);
 
-	printk("I-TLB conf: sh %d page %d cst %d aid %d pad1 %d \n",
+	printk("I-TLB conf: sh %d page %d cst %d aid %d pad1 %d\n",
 		cache_info.it_conf.tc_sh,
 		cache_info.it_conf.tc_page,
 		cache_info.it_conf.tc_cst,
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 3a44f7f..6337ade 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -364,32 +364,6 @@
 	.align		32
 	.endm
 
-	/* The following are simple 32 vs 64 bit instruction
-	 * abstractions for the macros */
-	.macro		EXTR	reg1,start,length,reg2
-#ifdef CONFIG_64BIT
-	extrd,u		\reg1,32+(\start),\length,\reg2
-#else
-	extrw,u		\reg1,\start,\length,\reg2
-#endif
-	.endm
-
-	.macro		DEP	reg1,start,length,reg2
-#ifdef CONFIG_64BIT
-	depd		\reg1,32+(\start),\length,\reg2
-#else
-	depw		\reg1,\start,\length,\reg2
-#endif
-	.endm
-
-	.macro		DEPI	val,start,length,reg
-#ifdef CONFIG_64BIT
-	depdi		\val,32+(\start),\length,\reg
-#else
-	depwi		\val,\start,\length,\reg
-#endif
-	.endm
-
 	/* In LP64, the space contains part of the upper 32 bits of the
 	 * fault.  We have to extract this and place it in the va,
 	 * zeroing the corresponding bits in the space register */
@@ -442,19 +416,19 @@
 	 */
 	.macro		L2_ptep	pmd,pte,index,va,fault
 #if PT_NLEVELS == 3
-	EXTR		\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
+	extru		\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
 #else
-	EXTR		\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
+	extru		\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
 #endif
-	DEP             %r0,31,PAGE_SHIFT,\pmd  /* clear offset */
+	dep             %r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 	copy		%r0,\pte
 	ldw,s		\index(\pmd),\pmd
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
-	DEP		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
+	dep		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	copy		\pmd,%r9
 	SHLREG		%r9,PxD_VALUE_SHIFT,\pmd
-	EXTR		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
-	DEP		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
+	extru		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
+	dep		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 	shladd		\index,BITS_PER_PTE_ENTRY,\pmd,\pmd
 	LDREG		%r0(\pmd),\pte		/* pmd is now pte */
 	bb,>=,n		\pte,_PAGE_PRESENT_BIT,\fault
@@ -605,7 +579,7 @@
 	depdi		0,31,32,\tmp
 #endif
 	copy		\va,\tmp1
-	DEPI		0,31,23,\tmp1
+	depi		0,31,23,\tmp1
 	cmpb,COND(<>),n	\tmp,\tmp1,\fault
 	ldi		(_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot
 	depd,z		\prot,8,7,\prot
@@ -997,13 +971,6 @@ intr_restore:
 
 	rfi
 	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
 
 #ifndef CONFIG_PREEMPT
 # define intr_do_preempt	intr_restore
@@ -2076,9 +2043,10 @@ syscall_restore:
 	LDREG	TASK_PT_GR31(%r1),%r31	   /* restore syscall rp */
 
 	/* NOTE: We use rsm/ssm pair to make this operation atomic */
+	LDREG   TASK_PT_GR30(%r1),%r1              /* Get user sp */
 	rsm     PSW_SM_I, %r0
-	LDREG   TASK_PT_GR30(%r1),%r30             /* restore user sp */
-	mfsp	%sr3,%r1			   /* Get users space id */
+	copy    %r1,%r30                           /* Restore user sp */
+	mfsp    %sr3,%r1                           /* Get user space id */
 	mtsp    %r1,%sr7                           /* Restore sr7 */
 	ssm     PSW_SM_I, %r0
 
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 2120746..159a2b8 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -61,6 +61,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/slab.h>
 
 #include <asm/unwind.h>
 
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index c07f618..a029f74 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -18,11 +18,11 @@
 */
 
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/scatterlist.h>
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index f7064ab..9efd974 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -13,12 +13,10 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <asm/io.h>
 #include <asm/system.h>
-#include <asm/cache.h>		/* for L1_CACHE_BYTES */
 #include <asm/superio.h>
 
 #define DEBUG_RESOURCES 0
@@ -123,6 +121,10 @@ static int __init pcibios_init(void)
 	} else {
 		printk(KERN_WARNING "pci_bios != NULL but init() is!\n");
 	}
+
+	/* Set the CLS for PCI as early as possible. */
+	pci_cache_line_size = pci_dfl_cache_line_size;
+
 	return 0;
 }
 
@@ -171,7 +173,7 @@ void pcibios_set_master(struct pci_dev *dev)
 	** upper byte is PCI_LATENCY_TIMER.
 	*/
 	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE,
-				(0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+			      (0x80 << 8) | pci_cache_line_size);
 }
 
 
@@ -254,10 +256,10 @@ EXPORT_SYMBOL(pcibios_bus_to_resource);
  * Since we are just checking candidates, don't use any fields other
  * than res->start.
  */
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t alignment)
 {
-	resource_size_t mask, align;
+	resource_size_t mask, align, start = res->start;
 
 	DBG_RES("pcibios_align_resource(%s, (%p) [%lx,%lx]/%x, 0x%lx, 0x%lx)\n",
 		pci_name(((struct pci_dev *) data)),
@@ -269,10 +271,10 @@ void pcibios_align_resource(void *data, struct resource *res,
 
 	/* Align to largest of MIN or input size */
 	mask = max(alignment, align) - 1;
-	res->start += mask;
-	res->start &= ~mask;
+	start += mask;
+	start &= ~mask;
 
-	/* The caller updates the end field, we don't.  */
+	return start;
 }
 
 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 1f3aa8d..76332da 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -43,6 +43,7 @@
 #include <linux/personality.h>
 #include <linux/ptrace.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/kallsyms.h>
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index fb37ac5..35c827e 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -468,7 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	tracehook_signal_handler(sig, info, ka, regs, 0);
+	tracehook_signal_handler(sig, info, ka, regs, 
+		test_thread_flag(TIF_SINGLESTEP) ||
+		test_thread_flag(TIF_BLOCKSTEP));
 
 	return 1;
 }
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index fb59852..e141324 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -23,7 +23,6 @@
  */
 
 #include <linux/compat.h>
-#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/unistd.h>
 #include <linux/init.h>
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 3f2fce8..69d63d3 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,6 @@
 */
 #include <linux/types.h>
 #include <linux/spinlock.h>
-#include <linux/slab.h>
 
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 9147391..c9b9322 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -234,18 +234,3 @@ long parisc_personality(unsigned long personality)
 
 	return err;
 }
-
-long parisc_newuname(struct new_utsname __user *name)
-{
-	int err = sys_newuname(name);
-
-#ifdef CONFIG_COMPAT
-	if (!err && personality(current->personality) == PER_LINUX32) {
-		if (__put_user(0, name->machine + 6) ||
-		    __put_user(0, name->machine + 7))
-			err = -EFAULT;
-	}
-#endif
-
-	return err;
-}
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index f5f9602..68e75ce 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -47,18 +47,17 @@ ENTRY(linux_gateway_page)
 	KILL_INSN
 	.endr
 
-	/* ADDRESS 0xb0 to 0xb4, lws uses 1 insns for entry */
+	/* ADDRESS 0xb0 to 0xb8, lws uses two insns for entry */
 	/* Light-weight-syscall entry must always be located at 0xb0 */
 	/* WARNING: Keep this number updated with table size changes */
 #define __NR_lws_entries (2)
 
 lws_entry:
-	/* Unconditional branch to lws_start, located on the 
-	   same gateway page */
-	b,n	lws_start
+	gate	lws_start, %r0		/* increase privilege */
+	depi	3, 31, 2, %r31		/* Ensure we return into user mode. */
 
-	/* Fill from 0xb4 to 0xe0 */
-	.rept 11
+	/* Fill from 0xb8 to 0xe0 */
+	.rept 10
 	KILL_INSN
 	.endr
 
@@ -423,9 +422,6 @@ tracesys_sigexit:
 
 	*********************************************************/
 lws_start:
-	/* Gate and ensure we return to userspace */
-	gate	.+8, %r0
-	depi	3, 31, 2, %r31	/* Ensure we return to userspace */
 
 #ifdef CONFIG_64BIT
 	/* FIXME: If we are a 64-bit kernel just
@@ -442,7 +438,7 @@ lws_start:
 #endif	
 
         /* Is the lws entry number valid? */
-	comiclr,>>=	__NR_lws_entries, %r20, %r0
+	comiclr,>>	__NR_lws_entries, %r20, %r0
 	b,n	lws_exit_nosys
 
 	/* WARNING: Trashing sr2 and sr3 */
@@ -473,7 +469,7 @@ lws_exit:
 	/* now reset the lowest bit of sp if it was set */
 	xor	%r30,%r1,%r30
 #endif
-	be,n	0(%sr3, %r31)
+	be,n	0(%sr7, %r31)
 
 
 	
@@ -529,7 +525,6 @@ lws_compare_and_swap32:
 #endif
 
 lws_compare_and_swap:
-#ifdef CONFIG_SMP
 	/* Load start of lock table */
 	ldil	L%lws_lock_start, %r20
 	ldo	R%lws_lock_start(%r20), %r28
@@ -572,8 +567,6 @@ cas_wouldblock:
 	ldo	2(%r0), %r28				/* 2nd case */
 	b	lws_exit				/* Contended... */
 	ldo	-EAGAIN(%r0), %r21			/* Spin in userspace */
-#endif
-/* CONFIG_SMP */
 
 	/*
 		prev = *addr;
@@ -601,13 +594,11 @@ cas_action:
 1:	ldw	0(%sr3,%r26), %r28
 	sub,<>	%r28, %r25, %r0
 2:	stw	%r24, 0(%sr3,%r26)
-#ifdef CONFIG_SMP
 	/* Free lock */
 	stw	%r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
 	/* Clear thread register indicator */
 	stw	%r0, 4(%sr2,%r20)
-# endif
 #endif
 	/* Return to userspace, set no error */
 	b	lws_exit
@@ -615,12 +606,10 @@ cas_action:
 
 3:		
 	/* Error occured on load or store */
-#ifdef CONFIG_SMP
 	/* Free lock */
 	stw	%r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
 	stw	%r0, 4(%sr2,%r20)
-# endif
 #endif
 	b	lws_exit
 	ldo	-EFAULT(%r0),%r21	/* set errno */
@@ -672,7 +661,6 @@ ENTRY(sys_call_table64)
 END(sys_call_table64)
 #endif
 
-#ifdef CONFIG_SMP
 	/*
 		All light-weight-syscall atomic operations 
 		will use this set of locks 
@@ -694,8 +682,6 @@ ENTRY(lws_lock_start)
 	.endr
 END(lws_lock_start)
 	.previous
-#endif
-/* CONFIG_SMP for lws_lock_start */
 
 .end
 
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 01c4fcf..3d52c97 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -127,7 +127,7 @@
 	ENTRY_SAME(socketpair)
 	ENTRY_SAME(setpgid)
 	ENTRY_SAME(send)
-	ENTRY_OURS(newuname)
+	ENTRY_SAME(newuname)
 	ENTRY_SAME(umask)		/* 60 */
 	ENTRY_SAME(chroot)
 	ENTRY_COMP(ustat)
@@ -417,6 +417,8 @@
 	ENTRY_COMP(pwritev)
 	ENTRY_COMP(rt_tgsigqueueinfo)
 	ENTRY_SAME(perf_event_open)
+	ENTRY_COMP(recvmmsg)
+	ENTRY_SAME(accept4)		/* 320 */
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index a79c6f9..05511cc 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -250,9 +250,21 @@ static int __init rtc_init(void)
 }
 module_init(rtc_init);
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	static struct pdc_tod tod_data;
+	if (pdc_tod_read(&tod_data) == 0) {
+		ts->tv_sec = tod_data.tod_sec;
+		ts->tv_nsec = tod_data.tod_usec * 1000;
+	} else {
+		printk(KERN_ERR "Error reading tod clock\n");
+	        ts->tv_sec = 0;
+		ts->tv_nsec = 0;
+	}
+}
+
+void __init time_init(void)
+{
 	unsigned long current_cr16_khz;
 
 	clocktick = (100 * PAGE0->mem_10msec) / HZ;
@@ -264,19 +276,4 @@ void __init time_init(void)
 	clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
 						clocksource_cr16.shift);
 	clocksource_register(&clocksource_cr16);
-
-	if (pdc_tod_read(&tod_data) == 0) {
-		unsigned long flags;
-
-		write_seqlock_irqsave(&xtime_lock, flags);
-		xtime.tv_sec = tod_data.tod_sec;
-		xtime.tv_nsec = tod_data.tod_usec * 1000;
-		set_normalized_timespec(&wall_to_monotonic,
-		                        -xtime.tv_sec, -xtime.tv_nsec);
-		write_sequnlock_irqrestore(&xtime_lock, flags);
-	} else {
-		printk(KERN_ERR "Error reading tod clock\n");
-	        xtime.tv_sec = 0;
-		xtime.tv_nsec = 0;
-	}
 }
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index e6f4b7a..92d977b 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
+#include <linux/ratelimit.h>
 #include <asm/uaccess.h>
 
 /* #define DEBUG_UNALIGNED 1 */
@@ -446,8 +447,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 
 void handle_unaligned(struct pt_regs *regs)
 {
-	static unsigned long unaligned_count = 0;
-	static unsigned long last_time = 0;
+	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 	unsigned long newbase = R1(regs->iir)?regs->gr[R1(regs->iir)]:0;
 	int modify = 0;
 	int ret = ERR_NOTHANDLED;
@@ -460,14 +460,8 @@ void handle_unaligned(struct pt_regs *regs)
 			goto force_sigbus;
 		}
 
-		if (unaligned_count > 5 &&
-				time_after(jiffies, last_time + 5 * HZ)) {
-			unaligned_count = 0;
-			last_time = jiffies;
-		}
-
-		if (!(current->thread.flags & PARISC_UAC_NOPRINT) 
-		    && ++unaligned_count < 5) {
+		if (!(current->thread.flags & PARISC_UAC_NOPRINT) &&
+			__ratelimit(&ratelimit)) {
 			char buf[256];
 			sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
 				current->comm, task_pid_nr(current), regs->ior, regs->iaoq[0]);
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index d172d42..f8c45cc 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -36,8 +36,8 @@
 #endif
 	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
 	LDREGX \t2(\t1),\t2 
-	addil LT%per_cpu__exception_data,%r27
-	LDREG RT%per_cpu__exception_data(%r1),\t1
+	addil LT%exception_data,%r27
+	LDREG RT%exception_data(%r1),\t1
 	/* t1 = &__get_cpu_var(exception_data) */
 	add,l \t1,\t2,\t1
 	/* t1 = t1->fault_ip */
@@ -46,8 +46,8 @@
 #else
 	.macro  get_fault_ip t1 t2
 	/* t1 = &__get_cpu_var(exception_data) */
-	addil LT%per_cpu__exception_data,%r27
-	LDREG RT%per_cpu__exception_data(%r1),\t2
+	addil LT%exception_data,%r27
+	LDREG RT%exception_data(%r1),\t2
 	/* t1 = t2->fault_ip */
 	LDREG EXCDATA_IP(\t2), \t1
 	.endm
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index abf41f4..1dbca5c 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -475,7 +475,8 @@ unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len)
 	return pa_memcpy((void __force *)dst, src, len);
 }
 
-unsigned long copy_from_user(void *dst, const void __user *src, unsigned long len)
+EXPORT_SYMBOL(__copy_from_user);
+unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len)
 {
 	mtsp(get_user_space(), 1);
 	mtsp(get_kernel_space(), 2);
diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 3ca1c61..27a7492 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -342,6 +342,7 @@ decode_fpu(unsigned int Fpu_register[], unsigned int trap_counts[])
 		return SIGNALCODE(SIGFPE, FPE_FLTINV);
 	  case DIVISIONBYZEROEXCEPTION:
 		update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
+		Clear_excp_register(exception_index);
 	  	return SIGNALCODE(SIGFPE, FPE_FLTDIV);
 	  case INEXACTEXCEPTION:
 		update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index c6afbfc..18162ce 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -264,8 +264,7 @@ no_context:
 
   out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk(KERN_CRIT "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
 }
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 13b6e3e..f4f4d70 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>		/* for hppa_dma_ops and pcxl_dma_ops */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ba3948c..2031a28 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -58,7 +58,7 @@ config IRQ_PER_CPU
 
 config NR_IRQS
 	int "Number of virtual interrupt numbers"
-	range 32 512
+	range 32 32768
 	default "512"
 	help
 	  This defines the number of virtual interrupt numbers the kernel
@@ -132,7 +132,7 @@ config PPC
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -140,6 +140,7 @@ config PPC
 	select HAVE_SYSCALL_WRAPPERS if PPC64
 	select GENERIC_ATOMIC64 if PPC32
 	select HAVE_PERF_EVENTS
+	select HAVE_REGS_AND_STACK_ACCESS_API
 
 config EARLY_PRINTK
 	bool
@@ -173,6 +174,7 @@ config PPC_OF
 
 config OF
 	def_bool y
+	select OF_FLATTREE
 
 config PPC_UDBG_16550
 	bool
@@ -240,6 +242,33 @@ config PPC_OF_PLATFORM_PCI
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config PPC_ADV_DEBUG_REGS
+	bool
+	depends on 40x || BOOKE
+	default y
+
+config PPC_ADV_DEBUG_IACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 4 if 44x
+	default 2
+
+config PPC_ADV_DEBUG_DACS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2
+
+config PPC_ADV_DEBUG_DVCS
+	int
+	depends on PPC_ADV_DEBUG_REGS
+	default 2 if 44x
+	default 0
+
+config PPC_ADV_DEBUG_DAC_RANGE
+	bool
+	depends on PPC_ADV_DEBUG_REGS && 44x
+	default y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -285,19 +314,6 @@ config 8XX_MINIMAL_FPEMU
 
 	  It is recommended that you build a soft-float userspace instead.
 
-config IOMMU_VMERGE
-	bool "Enable IOMMU virtual merging"
-	depends on PPC64
-	default y
-	help
-	  Cause IO segments sent to a device for DMA to be merged virtually
-	  by the IOMMU when they happen to have been allocated contiguously.
-	  This doesn't add pressure to the IOMMU allocator. However, some
-	  drivers don't support getting large merged segments coming back
-	  from *_map_sg().
-
-	  Most drivers don't have this problem; it is safe to say Y here.
-
 config IOMMU_HELPER
 	def_bool PPC64
 
@@ -335,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on PPC_BOOK3S && EXPERIMENTAL
+	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -384,7 +400,7 @@ config IRQ_ALL_CPUS
 
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
-	default y
+	default n
 	help
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
@@ -393,7 +409,7 @@ config SPARSE_IRQ
 	  ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
 	    out the irq_desc[] array in a more NUMA-friendly way. )
 
-	  If you don't know what to do here, say Y.
+	  If you don't know what to do here, say N.
 
 config NUMA
 	bool "NUMA support"
@@ -644,6 +660,12 @@ config ZONE_DMA
 	bool
 	default y
 
+config NEED_DMA_MAP_STATE
+	def_bool (PPC64 || NOT_COHERENT_CACHE)
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	depends on PPC64 || POWER4 || 6xx && !CPM2
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 5cdd7ed..2d38a50 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -44,6 +44,18 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
+config DEBUG_PER_CPU_MAPS
+	bool "Debug access to per_cpu maps"
+	depends on DEBUG_KERNEL
+	depends on SMP
+	default n
+	---help---
+	  Say Y to verify that the per_cpu map being accessed has
+	  been setup.  Adds a fair amount of code to kernel memory
+	  and decreases performance.
+
+	  Say N if unsure.
+
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
 	depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
@@ -123,13 +135,6 @@ config DEBUGGER
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b68a838..5d42f5e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -92,10 +92,10 @@ endif
 else
 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
-else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 endif
 
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+
 ifeq ($(CONFIG_TUNE_CELL),y)
 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
 endif
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 27db893..9d3bd4c 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -519,7 +519,7 @@ void ibm440ep_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@ void ibm440gx_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
 }
@@ -543,10 +543,10 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk,
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
-	eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+	/* serial clocks need fixup based on int/ext */
+	eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
 }
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index bb2465b..fae8192 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -77,7 +78,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
-		gamecube-head.S gamecube.c wii-head.S wii.c
+		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -140,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -169,7 +170,7 @@ quiet_cmd_wrap	= WRAP    $@
 		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
-image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
+image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
 image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
@@ -206,6 +207,8 @@ image-$(CONFIG_TAISHAN)			+= cuImage.taishan
 image-$(CONFIG_KATMAI)			+= cuImage.katmai
 image-$(CONFIG_WARP)			+= cuImage.warp
 image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
+image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
+					   treeImage.iss4xx-mpic
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
@@ -351,7 +354,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	simpleImage.* otheros.bld *.dtb
+	zImage.maple simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
deleted file mode 100644
index 893f446..0000000
--- a/arch/powerpc/boot/addRamDisk.c
+++ /dev/null
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
index 414ef8b..30f4120 100644
--- a/arch/powerpc/boot/dts/arches.dts
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -60,6 +60,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -146,6 +147,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -274,6 +282,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0xffffffff>;
 				gpcs-address = <0x0000000a>;
@@ -302,6 +311,7 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
 				phy-mode = "sgmii";
 				phy-map = <0x00000000>;
 				gpcs-address = <0x0000000b>;
@@ -331,6 +341,8 @@
 				max-frame-size = <9000>;
 				rx-fifo-size = <4096>;
 				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
 				phy-mode = "sgmii";
 				phy-map = <0x00000001>;
 				gpcs-address = <0x0000000C>;
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index c86114e..83f4b79 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc PPC9A Device Tree Source
+ * GE PPC9A Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -341,6 +341,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 820c2b3..fc3a331 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC310 Device Tree Source
+ * GE SBC310 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -32,6 +32,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
+		pci1 = &pci1;
 	};
 
 	cpus {
@@ -338,6 +339,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
@@ -358,7 +375,7 @@
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
 			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 30911ad..c0671cc 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -1,7 +1,7 @@
 /*
- * GE Fanuc SBC610 Device Tree Source
+ * GE SBC610 Device Tree Source
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -75,14 +75,48 @@
 		interrupts = <19 2>;
 		interrupt-parent = <&mpic>;
 
-		ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
-			  1 0 0xe8000000 0x08000000     // Paged Flash 0
-			  2 0 0xe0000000 0x08000000     // Paged Flash 1
-			  3 0 0xfc100000 0x00020000     // NVRAM
-			  4 0 0xfc000000 0x00008000     // FPGA
-			  5 0 0xfc008000 0x00008000     // AFIX FPGA
-			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
 
 		nvram@3,0 {
 			device_type = "nvram";
@@ -305,6 +339,22 @@
 			device_type = "open-pic";
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8641-guts";
 			reg = <0xe0000 0x1000>;
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index f6f6189..d62a4fb 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Glacier (460GT)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -42,6 +42,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -106,6 +107,16 @@
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -118,6 +129,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;
@@ -186,6 +204,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -237,6 +278,20 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
@@ -275,7 +330,7 @@
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -283,7 +338,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
 						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x00000074>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -305,7 +360,7 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -313,7 +368,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
 						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x00000074>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
@@ -336,7 +391,7 @@
 
 			EMAC2: ethernet@ef601100 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC2>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -344,7 +399,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
 						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
-				reg = <0xef601100 0x00000074>;
+				reg = <0xef601100 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
@@ -366,7 +421,7 @@
 
 			EMAC3: ethernet@ef601200 {
 				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
 				interrupt-parent = <&EMAC3>;
 				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
@@ -374,7 +429,7 @@
 				#size-cells = <0>;
 				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
 						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
-				reg = <0xef601200 0x00000074>;
+				reg = <0xef601200 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
@@ -414,6 +469,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -444,6 +500,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
@@ -485,6 +542,7 @@
 			 * later cannot be changed
 			 */
 			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
 				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 0000000..abcd0ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "stm,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts
new file mode 100644
index 0000000..23e9d9b
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *     Copyright (c) 2006, 2007 IBM Corp.
+ *     Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <1>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00100>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <2>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00200>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <3>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00030000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <0x0 0x2>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/iss4xx.dts b/arch/powerpc/boot/dts/iss4xx.dts
new file mode 100644
index 0000000..4ff6555
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Copyright (c) 2006, 2007 IBM Corp.
+ *    Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0x00000000>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>; // may need fixup in sim
+			d-cache-line-size = <32>; // may need fixup in sim
+			i-cache-size = <32768>; /* may need fixup in sim */
+			d-cache-size = <32768>; /* may need fixup in sim */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8f345de9..7c3be5e 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -44,6 +44,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
 		};
 	};
 
@@ -156,7 +157,7 @@
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
@@ -165,14 +166,47 @@
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
+				/* ranges property is supplied by U-Boot */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
 			};
 
-			UART0: serial@10000200 {
+			UART0: serial@f0000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000200 0x00000008>;
+				reg = <0xf0000200 0x00000008>;
 				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
 				current-speed = <115200>;
@@ -180,10 +214,10 @@
 				interrupts = <0x0 0x4>;
 			};
 
-			UART1: serial@10000300 {
+			UART1: serial@f0000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000300 0x00000008>;
+				reg = <0xf0000300 0x00000008>;
 				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -192,10 +226,10 @@
 			};
 
 
-			UART2: serial@10000600 {
+			UART2: serial@f0000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <0x10000600 0x00000008>;
+				reg = <0xf0000600 0x00000008>;
 				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
@@ -203,27 +237,27 @@
 				interrupts = <0x5 0x4>;
 			};
 
-			IIC0: i2c@10000400 {
+			IIC0: i2c@f0000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000400 0x00000014>;
+				reg = <0xf0000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
 			};
 
-			IIC1: i2c@10000500 {
+			IIC1: i2c@f0000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0x10000500 0x00000014>;
+				reg = <0xf0000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x3 0x4>;
 			};
 
-			EMAC0: ethernet@10000800 {
+			EMAC0: ethernet@f0000800 {
 				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
 				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0x10000800 0x00000074>;
+				reg = <0xf0000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
@@ -248,11 +282,11 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
-			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
@@ -453,6 +487,6 @@
 	};
 
 	chosen {
-		linux,stdout-path = "/plb/opb/serial@10000200";
+		linux,stdout-path = "/plb/opb/serial@f0000200";
 	};
 };
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f..d8b5d12 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
 			compatible = "cfi-flash";
 			/*
 			 * The Intel P30 chip has 2 non-identical chips on
-			 * one die, so we need to define 2 seperate regions
+			 * one die, so we need to define 2 separate regions
 			 * that are scanned by physmap_of independantly.
 			 */
 			reg = <0 0x00000000 0x02000000
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b1..179a178 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index e45a63b..59702ac 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c353dac..c9ef6bb 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -62,17 +62,12 @@
 		interrupt-parent = < &ipic >;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		bank-width = <1>;
 		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package .
+		// stacked package.
 		chips = <2>;
-		nand0@0 {
-			label = "nand0";
-			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
-		};
-		nand1@20000000 {
-			label = "nand1";
-			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
 		};
 	};
 
@@ -166,6 +161,11 @@
 			interrupt-parent = < &ipic >;
 		};
 
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
 		clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		mscan@1300 {
+		can@1300 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <0>;
 			interrupts = <12 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1300 0x80>;
 		};
 
-		mscan@1380 {
+		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <1>;
 			interrupts = <13 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <0>;
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <1>;
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <2>;
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@
 		};
 
 		display@2100 {
-			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
 			interrupt-parent = < &ipic >;
@@ -277,7 +288,7 @@
 
 		// USB1 using external ULPI PHY
 		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	compatible = "fsl,mpc5121-usb2-dr";
 		//	reg = <0x3000 0x1000>;
 		//	#address-cells = <1>;
 		//	#size-cells = <0>;
@@ -285,12 +296,11 @@
 		//	interrupts = <43 0x8>;
 		//	dr_mode = "otg";
 		//	phy_type = "ulpi";
-		//	port1;
 		//};
 
 		// USB0 using internal UTMI PHY
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x4000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -298,7 +308,8 @@
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
-			port0;
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
 		};
 
 		// IO control
@@ -365,7 +376,7 @@
 		};
 
 		dma@14000 {
-			compatible = "fsl,mpc5121-dma2";
+			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
 			interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 8a3a4f3..4dd08c3 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -292,7 +292,7 @@
 			fsl,num-channels = <4>;
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3ab0abf>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
 		};
 
 		sata@18000 {
@@ -463,4 +463,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 9e2264b..dbc1b98 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -486,4 +486,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 4e6a1a4..3447eb9 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -470,4 +470,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 72336d5..15560c6 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -436,4 +436,18 @@
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4173af3..0f52624 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -20,10 +20,8 @@
 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
-/*
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
-*/
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
@@ -254,7 +252,6 @@
 			};
 		};
 
-/* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -310,7 +307,6 @@
 				};
 			};
 		};
- */
 
 		serial0: serial@4500 {
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 6d892ba..92fb178 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -54,9 +54,52 @@
 		reg = <0x0 0x10000000>;
 	};
 
-	bcsr@f8000000 {
-		compatible = "fsl,mpc8568mds-bcsr";
-		reg = <0xf8000000 0x8000>;
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0x1000>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr5: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8568mds-bcsr-gpio";
+				reg = <0x5 0x1>;
+				gpio-controller;
+			};
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <5 0 0x8000>;
+		};
 	};
 
 	soc8568@e0000000 {
@@ -610,4 +653,20 @@
 		sleep = <&pmc 0x00080000   /* controller */
 			 &pmc 0x00040000>; /* message unit */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&bcsr5 1 0>;
+		};
+
+		amber {
+			gpios = <&bcsr5 2 0>;
+		};
+
+		red {
+			gpios = <&bcsr5 3 0>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 795eb36..8b72eaf 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -535,6 +535,7 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
 			pio-handle = <&pio1>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&qe_phy0>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -579,7 +580,7 @@
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
-			tbi-phy@11 {
+			tbi1: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
@@ -590,7 +591,7 @@
 			reg = <0x3520 0x18>;
 			compatible = "fsl,ucc-mdio";
 
-			tbi0: tbi-phy@15 {
+			tbi6: tbi-phy@15 {
 			reg = <0x15>;
 			device_type = "tbi-phy";
 			};
@@ -600,7 +601,7 @@
 			#size-cells = <0>;
 			reg = <0x3720 0x38>;
 			compatible = "fsl,ucc-mdio";
-			tbi1: tbi-phy@17 {
+			tbi8: tbi-phy@17 {
 				reg = <0x17>;
 				device_type = "tbi-phy";
 			};
@@ -617,10 +618,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
 			pio-handle = <&pio3>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&qe_phy2>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -632,10 +645,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
 			pio-handle = <&pio2>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&qe_phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet3: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -647,10 +672,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
 			pio-handle = <&pio4>;
+			tbi-handle = <&tbi4>;
 			phy-handle = <&qe_phy3>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@3320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi4: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet5: ucc@3400 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -661,7 +698,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
-			tbi-handle = <&tbi0>;
+			tbi-handle = <&tbi6>;
 			phy-handle = <&qe_phy5>;
 			phy-connection-type = "sgmii";
 		};
@@ -676,7 +713,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
-			tbi-handle = <&tbi1>;
+			tbi-handle = <&tbi8>;
 			phy-handle = <&qe_phy7>;
 			phy-connection-type = "sgmii";
 		};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 5bd1011..3375c2a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -215,6 +215,18 @@
 			clock-frequency = <0>;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
 			reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
 			protected-sources = <
 			31 32 33 37 38 39       /* enet2 enet3 */
 			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe0 0xe1 0xe2 0xe3     /* msi */
-			0xe4 0xe5 0xe6 0xe7
+			0xe4 0xe5 0xe6 0xe7	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 0efc345..e7b477f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -154,12 +154,8 @@
 		msi@41600 {
 			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
 			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
+			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
 				0xe4 0
 				0xe5 0
 				0xe6 0
@@ -190,6 +186,7 @@
 			0x1 0x2 0x3 0x4         /* pci slot */
 			0x9 0xa 0xb 0xc         /* usb */
 			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index df52690..22f64b6 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -19,6 +19,9 @@
 	aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
 		pci0 = &pci0;
 		pci1 = &pci1;
 	};
@@ -346,6 +349,122 @@
 			};
 		};
 
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@b1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@b2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
 		usb@22000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -356,6 +475,11 @@
 			phy_type = "ulpi";
 		};
 
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
 		usb@23000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -365,6 +489,7 @@
 			interrupts = <46 0x2>;
 			phy_type = "ulpi";
 		};
+		*/
 
 		sdhci@2e000 {
 			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 0000000..7fad2df
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index d2af32e..81636c0 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -234,10 +234,132 @@
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
 	};
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c
new file mode 100644
index 0000000..fcc4495
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-iss4xx.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+static void iss_4xx_fixups(void)
+{
+	ibm4xx_sdram_fixup_memsize();
+}
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+void platform_init(void)
+{
+	unsigned long end_of_ram = 0x08000000;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+	u32 pir_reg;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = iss_4xx_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index f4594ed..cb97e75 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -149,6 +149,10 @@ pseries)
     platformo=$object/of.o
     link_address='0x4000000'
     ;;
+maple)
+    platformo=$object/of.o
+    link_address='0x400000'
+    ;;
 pmac|chrp)
     platformo=$object/of.o
     ;;
@@ -237,6 +241,9 @@ gamecube|wii)
     link_address='0x600000'
     platformo="$object/$platform-head.o $object/$platform.o"
     ;;
+treeboot-iss4xx-mpic)
+    platformo="$object/treeboot-iss4xx.o"
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -321,7 +328,7 @@ fi
 
 # post-processing needed for some platforms
 case "$platform" in
-pseries|chrp)
+pseries|chrp|maple)
     $objbin/addnote "$ofile"
     ;;
 coff)
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 173a5bb..4aa17b6 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:33:07 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -78,37 +98,45 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +148,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +223,7 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_ACADIA=y
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -208,10 +266,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -227,10 +287,12 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +317,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +335,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -316,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -329,6 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,8 +405,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -355,6 +424,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -367,9 +437,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -445,7 +515,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -461,6 +530,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -491,7 +561,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -512,6 +586,8 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -530,17 +606,18 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
 CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -553,6 +630,7 @@ CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -598,6 +676,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -614,6 +693,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -636,27 +720,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -678,7 +748,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -689,14 +764,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -706,6 +784,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -760,7 +843,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +858,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +873,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -804,6 +889,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -812,16 +898,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -833,35 +926,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -877,13 +980,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -892,10 +998,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -923,11 +1031,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -964,6 +1074,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1083,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e9b8495..9a5f1ab 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:48 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:37:34 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -78,37 +98,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +148,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +223,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ACADIA is not set
 CONFIG_EP405=y
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -210,10 +268,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -229,10 +289,12 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -257,6 +319,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -274,14 +337,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -331,6 +393,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,8 +407,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -357,6 +426,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -369,9 +439,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -447,7 +517,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +532,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -476,12 +546,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,7 +576,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -522,6 +601,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +621,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -548,6 +632,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -558,9 +643,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -570,6 +659,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -579,14 +669,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +698,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -653,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -669,6 +761,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -691,27 +788,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -748,14 +831,16 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -775,11 +860,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -807,7 +892,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -822,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -831,7 +916,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -842,14 +932,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -859,6 +952,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -913,7 +1011,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -927,8 +1024,48 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -943,11 +1080,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -957,6 +1096,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -965,16 +1105,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -986,35 +1133,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1030,13 +1187,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1045,10 +1205,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1076,11 +1238,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1117,6 +1281,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1125,5 +1290,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index 8c019d7..0b45213 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:45:11 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -78,37 +98,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +148,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +223,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 CONFIG_HCU4=y
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -208,10 +266,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -227,10 +287,12 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +317,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +335,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -316,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -329,6 +391,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,8 +405,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -355,6 +424,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -367,9 +437,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -445,7 +515,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -461,6 +530,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -473,12 +543,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -498,7 +573,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -519,6 +598,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -537,7 +618,10 @@ CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -545,6 +629,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -555,9 +640,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -567,6 +656,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -576,14 +666,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -596,6 +685,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -641,6 +731,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -657,13 +748,17 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -680,27 +775,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -722,7 +803,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -733,14 +819,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -750,6 +839,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -804,7 +898,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -820,6 +913,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -834,11 +928,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +944,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -856,16 +953,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -877,35 +981,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -921,13 +1035,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -936,10 +1053,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -967,11 +1086,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1008,6 +1129,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1016,5 +1138,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 9a05ec0..4d2de0b 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 13:28:37 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:51:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -29,7 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -52,6 +55,7 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -79,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -92,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -121,22 +126,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +175,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -190,6 +223,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 CONFIG_KILAUEA=y
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -233,10 +267,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -252,8 +287,7 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -343,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -370,7 +405,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -383,6 +424,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -395,9 +437,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -498,6 +540,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -574,16 +617,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -596,6 +640,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -641,6 +686,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -656,6 +702,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -696,11 +743,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -709,10 +751,6 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -730,6 +768,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -753,6 +796,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -779,6 +823,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -790,7 +835,6 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -810,10 +854,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -821,6 +868,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -868,6 +916,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -889,7 +938,9 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -913,6 +964,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -920,6 +972,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -979,7 +1032,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1037,6 +1089,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1054,6 +1107,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1072,10 +1126,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1099,10 +1155,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1124,13 +1180,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1172,11 +1231,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 1467475..a1f3f50 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun  3 09:11:02 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:55:12 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -29,14 +30,16 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -78,11 +83,13 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -108,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,6 +126,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -129,7 +141,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -137,6 +148,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,14 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -178,6 +223,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 CONFIG_MAKALU=y
 # CONFIG_WALNUT is not set
@@ -220,10 +266,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -239,9 +287,8 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -330,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +405,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -369,6 +424,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -381,9 +437,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -474,6 +530,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -504,14 +561,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,16 +606,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -568,6 +630,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -613,6 +676,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -629,6 +693,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -651,27 +720,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -695,6 +750,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -705,14 +764,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -770,7 +832,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -818,6 +879,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -827,6 +889,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -844,10 +907,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,11 +926,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -873,24 +941,26 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -910,13 +980,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -958,11 +1031,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 416e79a..c763135 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 5ab29dd..6597b2f 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:57 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:56:30 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -78,37 +98,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +148,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +223,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 CONFIG_WALNUT=y
@@ -211,10 +269,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -230,10 +290,12 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +320,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,14 +338,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -319,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -332,6 +394,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,8 +408,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -358,6 +427,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -370,9 +440,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -448,7 +518,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -464,6 +533,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -476,12 +546,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,7 +576,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -522,6 +601,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +621,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -548,6 +632,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -558,9 +643,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -570,6 +659,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -579,14 +669,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -599,6 +688,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -644,6 +734,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -660,6 +751,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -682,27 +778,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -727,7 +809,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -743,7 +825,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -754,14 +841,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -771,6 +861,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -825,7 +920,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -841,6 +935,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -855,11 +950,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -869,6 +966,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -877,16 +975,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -898,35 +1003,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -942,13 +1057,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -957,10 +1075,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -988,11 +1108,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1029,6 +1151,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1037,5 +1160,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 6f976b5..2d3dfb5 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug 13 14:14:07 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:02:35 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -83,17 +87,18 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -121,22 +126,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +175,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -198,6 +231,7 @@ CONFIG_ARCHES=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -241,10 +275,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -260,8 +295,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -352,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -379,7 +414,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -392,6 +433,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -404,9 +446,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -497,6 +539,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -573,16 +616,17 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -595,6 +639,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -640,6 +685,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -656,6 +702,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -696,11 +743,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -709,10 +751,6 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -730,6 +768,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -753,6 +796,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -779,6 +823,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -790,9 +835,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -810,10 +853,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -821,6 +867,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -858,6 +905,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -865,6 +913,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -934,7 +983,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -993,6 +1041,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,6 +1059,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1028,10 +1078,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1055,10 +1107,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1080,7 +1132,11 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index e57f1e4..51a00c4 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:33 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:09:03 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +79,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -82,14 +102,17 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,19 +122,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +152,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +179,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +234,8 @@ CONFIG_BAMBOO=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +299,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -265,6 +330,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +348,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -339,6 +404,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,8 +418,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -365,6 +437,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -386,6 +459,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -398,12 +472,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -423,7 +502,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -444,6 +527,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -462,7 +547,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -470,6 +558,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -480,9 +569,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -492,6 +585,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -501,14 +595,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -521,6 +614,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -566,6 +660,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -582,6 +677,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -604,27 +704,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -649,7 +735,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -665,7 +751,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,14 +767,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -693,6 +787,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -746,7 +845,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -762,6 +860,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -776,11 +875,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -790,6 +891,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -798,16 +900,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -819,35 +928,45 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -863,13 +982,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -878,10 +1000,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -909,11 +1033,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -950,6 +1076,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -958,5 +1085,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index b312b166..1028b1b 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 17:27:20 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:12:20 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -33,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -56,6 +59,7 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -83,17 +87,18 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -121,22 +126,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +175,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -198,6 +231,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 CONFIG_CANYONLANDS=y
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -241,10 +275,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -260,8 +295,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -352,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -379,7 +414,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -392,6 +433,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -404,9 +446,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -508,6 +550,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -585,16 +628,18 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -616,6 +661,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -661,6 +707,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -676,6 +723,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -717,11 +765,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -730,10 +773,6 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -751,6 +790,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -774,6 +818,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -800,6 +845,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -811,9 +857,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -831,10 +875,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -842,6 +889,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -882,10 +930,12 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
@@ -993,6 +1043,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1014,7 +1065,9 @@ CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1038,6 +1091,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1045,6 +1099,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1104,7 +1159,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1201,6 +1255,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1218,6 +1273,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1236,10 +1292,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1263,10 +1321,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1288,7 +1346,11 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index b652f7d..69f5633 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:20:46 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -81,37 +101,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +151,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +178,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +233,8 @@ CONFIG_EBONY=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -218,10 +277,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +328,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,14 +346,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -338,6 +402,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -350,8 +416,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +435,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -376,9 +448,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -453,7 +525,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +540,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +553,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +583,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -527,6 +608,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -545,7 +628,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -553,6 +639,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -563,9 +650,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -575,6 +666,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -584,14 +676,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -604,6 +695,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -649,6 +741,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -665,6 +758,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -687,27 +785,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -732,7 +816,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -748,7 +832,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -759,14 +848,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -776,6 +868,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -840,7 +937,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -856,6 +952,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -871,11 +968,13 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -885,6 +984,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -893,16 +993,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -914,35 +1021,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,13 +1075,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -973,10 +1093,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1004,11 +1126,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1045,6 +1169,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index 007f3bd..dcd859c 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Wed Aug 19 13:06:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:33:04 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -34,7 +34,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -57,6 +59,7 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -84,17 +87,18 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -122,22 +126,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -145,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -170,14 +175,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -243,10 +275,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -262,8 +295,7 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -358,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -387,14 +420,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -407,6 +437,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -419,9 +450,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -522,6 +553,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -573,8 +605,11 @@ CONFIG_SCSI_SAS_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -611,7 +646,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -682,7 +720,9 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -711,12 +751,11 @@ CONFIG_E1000E=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -730,6 +769,7 @@ CONFIG_E1000E=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -775,6 +815,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -791,6 +832,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -831,11 +873,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -844,10 +881,6 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
@@ -865,7 +898,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -883,10 +915,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -894,6 +929,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -935,6 +971,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -942,6 +979,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1001,7 +1039,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1059,6 +1096,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1095,10 +1133,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1122,10 +1162,10 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1147,13 +1187,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1197,11 +1240,13 @@ CONFIG_CRYPTO_XTS=y
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
new file mode 100644
index 0000000..277f88c
--- /dev/null
+++ b/arch/powerpc/configs/44x/icon_defconfig
@@ -0,0 +1,1451 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Fri May 21 17:40:22 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ICON=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_440SPe=y
+CONFIG_STDBINUTILS=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
+# CONFIG_DISPLAY_PDSP1880 is not set
+# CONFIG_MUCMC52_IO is not set
+# CONFIG_UC101_IO is not set
+# CONFIG_SRAM is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
new file mode 100644
index 0000000..8683cbc
--- /dev/null
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -0,0 +1,1026 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33
+# Thu Mar  4 11:50:12 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+# CONFIG_NOT_COHERENT_CACHE is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_47x=y
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ISS4xx=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/issblk0"
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x40000200
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c23a4ef..a2c24d1 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:38 2009
+# Linux kernel version: 2.6.33-rc5
+# Tue Jan 26 14:40:58 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,21 +78,37 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -94,19 +118,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -118,6 +148,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,8 +166,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,19 +174,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -171,6 +229,8 @@ CONFIG_KATMAI=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -212,10 +272,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -231,10 +293,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -259,6 +324,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -276,14 +342,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -320,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -333,6 +398,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -345,8 +412,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -359,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -369,7 +442,90 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -380,6 +536,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -392,12 +549,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -417,7 +579,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -440,6 +606,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -458,7 +626,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -466,6 +637,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -476,9 +648,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -488,6 +664,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -497,14 +674,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -517,6 +693,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -562,6 +739,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -578,13 +756,17 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -601,27 +783,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -646,7 +814,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -662,7 +830,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,11 +849,13 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -690,6 +865,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -722,6 +902,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -743,7 +924,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -759,6 +939,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -773,11 +954,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -787,6 +970,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -795,16 +979,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -816,35 +1007,43 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -859,13 +1058,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -874,10 +1076,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -905,11 +1109,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -946,6 +1152,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -954,5 +1161,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index b25fad1..3bb55b5 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:41 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:59:12 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -81,14 +101,17 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -98,19 +121,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -122,6 +151,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,8 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +178,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -175,6 +233,8 @@ CONFIG_RAINIER=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -216,10 +276,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,10 +297,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -263,6 +328,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,14 +346,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -337,6 +402,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,8 +416,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -363,6 +435,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -375,9 +448,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -453,7 +526,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +541,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +554,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +584,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -533,6 +615,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -543,9 +626,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -555,6 +642,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -564,14 +652,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -584,6 +671,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -629,6 +717,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -645,6 +734,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -667,27 +761,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -712,7 +792,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -728,7 +808,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -739,14 +824,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -756,6 +844,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -820,7 +913,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -836,6 +928,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -851,11 +944,13 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -865,6 +960,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -873,16 +969,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -894,35 +997,45 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -942,6 +1055,7 @@ CONFIG_PPC_EARLY_DEBUG=y
 CONFIG_PPC_EARLY_DEBUG_44x=y
 # CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 
@@ -951,13 +1065,16 @@ CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -966,10 +1083,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -997,11 +1116,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1038,6 +1159,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1046,5 +1168,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index ed31d4f..684f40d 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Feb  4 14:31:09 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:05:05 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,6 +79,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -78,23 +87,28 @@ CONFIG_POSIX_MQUEUE=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -104,19 +118,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -128,6 +148,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,8 +167,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,14 +175,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -177,6 +231,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 CONFIG_REDWOOD=y
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -219,10 +274,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -238,10 +295,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -262,12 +322,15 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -285,14 +348,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -342,6 +404,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -354,13 +418,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -373,6 +437,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -385,9 +450,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -462,7 +527,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -479,6 +543,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -512,10 +577,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -533,23 +594,30 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -558,7 +626,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -569,8 +636,12 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_FUSION=y
@@ -586,7 +657,11 @@ CONFIG_FUSION_MAX_SGE=128
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -614,6 +689,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -632,7 +709,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -640,6 +720,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -650,19 +731,21 @@ CONFIG_E1000E=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -676,6 +759,7 @@ CONFIG_E1000E=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -721,6 +805,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -737,6 +822,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -777,11 +863,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -790,25 +871,23 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -826,31 +905,21 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -876,7 +945,12 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -887,14 +961,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -904,6 +981,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -958,7 +1040,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -974,6 +1055,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -988,11 +1070,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1002,6 +1086,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,16 +1095,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1031,35 +1123,45 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1075,13 +1177,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1092,10 +1197,12 @@ CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1123,11 +1230,13 @@ CONFIG_CRYPTO_XTS=y
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1164,6 +1273,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1172,5 +1282,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index e14e89a..e202924 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:42 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:11:24 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +79,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -83,14 +103,17 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,19 +122,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +152,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +178,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +233,8 @@ CONFIG_SAM440EP=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -218,10 +277,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +298,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -264,6 +328,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,14 +346,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -338,6 +402,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -350,8 +416,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +435,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -385,6 +457,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -420,10 +493,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -440,8 +509,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -463,6 +534,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -488,14 +560,16 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -508,7 +582,11 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -529,6 +607,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -547,17 +627,19 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -580,6 +662,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -589,6 +672,7 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -605,25 +689,30 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -639,6 +728,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -676,6 +766,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -691,6 +782,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
@@ -733,11 +825,6 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -746,27 +833,23 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -784,31 +867,21 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -870,6 +943,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -899,7 +973,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -912,15 +985,18 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -933,10 +1009,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -962,17 +1039,20 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -992,11 +1072,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1038,7 +1118,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1054,6 +1133,7 @@ CONFIG_USB_STORAGE=m
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1090,9 +1170,11 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1110,15 +1192,22 @@ CONFIG_RTC_DRV_M41T80_WDT=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1130,6 +1219,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1142,10 +1232,13 @@ CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1155,6 +1248,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1267,6 +1365,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1281,11 +1380,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1295,27 +1396,29 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1326,7 +1429,11 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 6400aae..c348a46 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Apr  7 17:04:52 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:15:51 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +57,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -72,6 +79,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -79,11 +87,13 @@ CONFIG_POSIX_MQUEUE=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -92,8 +102,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -121,6 +130,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -129,7 +145,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -137,6 +152,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,14 +179,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -186,6 +235,7 @@ CONFIG_SEQUOIA=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -228,10 +278,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -247,9 +299,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -293,11 +344,11 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -353,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +418,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -378,6 +437,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -390,9 +450,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -493,6 +553,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -515,6 +576,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -534,14 +596,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -576,7 +641,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -584,6 +652,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,6 +663,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -619,12 +691,11 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -637,6 +708,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -682,6 +754,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -698,6 +771,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -720,27 +798,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -783,6 +847,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -793,14 +861,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +987,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -925,6 +997,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -933,16 +1006,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -954,11 +1034,12 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -968,27 +1049,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1004,13 +1088,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1052,11 +1139,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index ef32cc4..f4cb7e8 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:47 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:21:04 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -81,14 +101,17 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -98,19 +121,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -122,6 +151,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,8 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +178,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -175,6 +233,8 @@ CONFIG_TAISHAN=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -216,10 +276,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,10 +297,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -263,6 +328,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,14 +346,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -337,6 +402,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,8 +416,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -363,6 +435,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -375,9 +448,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -453,7 +526,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +541,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +554,17 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +584,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -529,6 +611,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -547,7 +631,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -555,6 +642,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -565,9 +653,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -577,6 +669,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -586,14 +679,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -606,6 +698,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -651,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -667,6 +761,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -689,27 +788,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -734,7 +819,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,7 +835,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -761,14 +851,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -778,6 +871,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -832,7 +930,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -848,6 +945,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -862,11 +960,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -876,6 +976,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -884,16 +985,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -905,35 +1013,45 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -949,13 +1067,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -964,10 +1085,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -995,11 +1118,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1036,6 +1161,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1044,5 +1170,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 2518b85..c7ead0e 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -80,8 +80,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 787635f..99eff4d 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun  9 23:35:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:27:46 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +60,13 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -81,11 +87,13 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,6 +131,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -131,7 +145,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -139,6 +152,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,14 +179,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +234,7 @@ CONFIG_WARP=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -229,10 +277,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,9 +298,8 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -356,6 +405,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -371,6 +421,7 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +434,13 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -396,6 +453,7 @@ CONFIG_VLAN_8021Q=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -407,9 +465,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -513,6 +571,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -524,9 +586,11 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -534,7 +598,9 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -557,15 +623,11 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -582,7 +644,6 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -609,14 +670,14 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +739,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -693,6 +755,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -725,17 +788,17 @@ CONFIG_I2C_IBM_IIC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -761,10 +824,19 @@ CONFIG_GPIO_SYSFS=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -787,6 +859,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -812,6 +885,8 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -821,7 +896,6 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
@@ -855,26 +929,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,10 +980,11 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -988,6 +1052,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1014,7 +1079,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
-CONFIG_MMC_PIKASD=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -1025,9 +1091,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 # CONFIG_LEDS_GPIO_PLATFORM is not set
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1048,6 +1115,10 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1065,10 +1136,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,7 +1219,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1235,6 +1308,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1244,6 +1318,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1261,10 +1336,14 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1276,11 +1355,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1290,27 +1370,30 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1326,13 +1409,16 @@ CONFIG_IRQSTACKS=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
@@ -1366,11 +1452,13 @@ CONFIG_CRYPTO_ALGAPI2=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index ff9bdb2..7664c83 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:07 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:22 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,14 +94,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -109,6 +103,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -340,7 +335,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -517,6 +511,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -684,6 +680,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -714,6 +711,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -754,6 +752,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 
 #
@@ -771,18 +770,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -813,7 +814,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -891,7 +891,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -903,7 +902,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1009,6 +1007,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 7b3f4d0..eac7c17 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:09 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -95,14 +95,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -110,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -317,6 +312,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -333,7 +329,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -360,7 +355,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -457,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -631,6 +627,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
@@ -668,7 +665,7 @@ CONFIG_PATA_MPC52xx=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -768,6 +765,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -828,6 +826,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -879,6 +878,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -924,18 +924,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -944,6 +947,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1062,6 +1066,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index eaae2d4..27afb6e 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:08 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,14 +94,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -109,6 +103,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -341,7 +336,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -518,6 +512,8 @@ CONFIG_MTD_ROM=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -699,6 +695,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -728,6 +725,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -773,10 +771,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -811,6 +810,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -831,6 +831,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -843,18 +844,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1050,6 +1053,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 1742c02..5fe39dd 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:10 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:25 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -326,7 +320,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -352,7 +345,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -525,6 +517,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -610,6 +604,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=m
@@ -647,7 +642,7 @@ CONFIG_PATA_MPC52xx=m
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -775,6 +770,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -824,6 +820,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -870,18 +867,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -890,6 +890,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -997,7 +998,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1009,7 +1009,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1172,6 +1171,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 3972438..a108b84 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 14:45:09 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:34:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,14 +94,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -109,6 +103,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -346,7 +341,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -524,6 +518,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -704,6 +700,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -733,6 +730,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -780,10 +778,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -818,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -838,6 +838,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_MPC5200_WDT is not set
 
 #
@@ -855,18 +856,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -897,7 +900,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -975,7 +977,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -987,7 +988,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1151,6 +1151,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index baa2bbb..04f1626 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:38 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -112,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -543,6 +537,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -579,6 +575,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -596,6 +593,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -788,6 +786,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -836,6 +835,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -849,15 +849,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -883,10 +877,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -923,6 +918,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -971,18 +967,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -991,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1083,7 +1083,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1096,7 +1095,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1259,6 +1257,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1285,6 +1284,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 8b1aa80..1843ee1 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:39 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -98,7 +98,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
@@ -346,7 +346,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -387,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -539,6 +539,8 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
 # CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
 # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -563,6 +565,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -690,6 +693,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -720,6 +724,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -732,15 +737,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -765,18 +764,20 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -805,8 +806,6 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -887,6 +886,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -911,6 +911,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -976,6 +977,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 2f2d985..78ae3bf 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:15 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -556,6 +550,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -593,6 +589,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -612,6 +609,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -772,6 +770,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -824,6 +823,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -836,6 +837,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -931,6 +933,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -980,6 +983,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -993,15 +997,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1044,10 +1042,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1086,6 +1085,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1134,21 +1134,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1157,6 +1160,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1289,7 +1293,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1302,7 +1305,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1341,6 +1343,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1511,6 +1514,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1537,6 +1541,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 633e611..cccb713 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:16 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -556,6 +550,8 @@ CONFIG_MTD_NAND_IDS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -593,6 +589,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -612,6 +609,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -735,6 +733,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -837,6 +836,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -889,6 +889,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -901,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -996,6 +999,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1045,6 +1049,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1058,15 +1063,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1109,10 +1108,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1151,6 +1151,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1199,21 +1200,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1222,6 +1226,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1354,7 +1359,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1367,7 +1371,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1406,6 +1409,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1576,6 +1580,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1602,6 +1607,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 0b4262b..74cb27a 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:17 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:41 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -457,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -492,6 +488,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -509,6 +506,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -693,6 +691,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -705,6 +705,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -790,6 +791,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -839,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -851,15 +854,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -885,10 +882,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -925,6 +923,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -967,18 +966,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -987,6 +989,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1171,6 +1174,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1197,6 +1201,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 155af00..10412a9 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:18 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:42 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -457,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -494,6 +490,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -514,6 +511,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -700,6 +698,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -712,6 +712,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -808,6 +809,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -859,6 +861,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -872,15 +875,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -922,10 +919,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -964,6 +962,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1012,21 +1011,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1035,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1166,7 +1169,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1179,7 +1181,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1204,8 +1205,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MMC_CB710 is not set
@@ -1298,6 +1297,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1324,6 +1324,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index ff45f49..7b31fc3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:19 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:43 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -540,6 +534,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -577,6 +573,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -644,6 +641,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -767,6 +765,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -880,6 +879,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -892,6 +893,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -966,6 +968,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1015,6 +1018,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1028,15 +1032,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -1095,21 +1093,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1118,6 +1119,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1222,7 +1224,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1235,7 +1236,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1399,6 +1399,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1425,6 +1426,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 28d8ff3..41401a9 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:20 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:44 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -540,6 +534,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -577,6 +573,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -596,6 +593,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -756,6 +754,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -768,6 +768,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -842,6 +843,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -891,6 +893,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -904,15 +907,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -971,21 +968,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -994,6 +994,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1098,7 +1099,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1111,7 +1111,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1275,6 +1274,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1301,6 +1301,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 6252ab5..dc176b6 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:45 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -456,6 +450,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -491,6 +487,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -508,6 +505,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -580,6 +578,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -631,6 +630,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -643,6 +644,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -726,6 +728,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -774,6 +777,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -786,15 +790,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -820,10 +818,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -860,6 +859,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -902,18 +902,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -922,6 +925,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1106,6 +1110,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1132,6 +1137,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 7822737..f512972 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:46 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -323,6 +318,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -334,7 +330,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -360,7 +355,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -538,6 +532,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -573,6 +569,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -590,6 +587,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -774,6 +772,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -786,6 +786,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -871,6 +872,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -920,6 +922,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -932,15 +935,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -966,10 +963,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1006,6 +1004,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1048,18 +1047,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1068,6 +1070,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1253,6 +1256,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1279,6 +1283,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 9451d6e..77abfe8 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:23 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -112,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -323,6 +318,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -336,7 +332,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -550,6 +544,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -587,6 +583,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -606,6 +603,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -774,6 +772,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -825,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -837,15 +837,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -876,14 +870,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -932,22 +930,27 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -956,6 +959,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1145,6 +1149,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1171,6 +1176,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f67b70d..0cdb414 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:22 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -456,6 +450,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -491,6 +487,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -508,6 +505,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -631,6 +629,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -755,6 +754,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -767,6 +768,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -851,6 +853,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -901,6 +904,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -913,15 +917,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -947,10 +945,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +986,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1029,18 +1029,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1049,6 +1052,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1175,6 +1179,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1201,6 +1206,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index a84fd11..e69ed1b 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:24 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:48 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -124,7 +119,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -361,7 +356,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -451,6 +445,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -487,6 +483,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -504,6 +501,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -626,6 +624,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -850,6 +849,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -900,6 +900,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -913,15 +914,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -947,10 +942,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +983,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1034,18 +1031,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1054,6 +1054,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1079,6 +1080,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1094,14 +1096,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1190,7 +1197,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1203,7 +1209,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1297,6 +1302,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1323,6 +1329,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 72c2067..56e3995 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:25 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:49 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +118,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -322,6 +317,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -333,7 +329,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -359,7 +354,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -537,6 +531,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -573,6 +569,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -590,6 +587,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -812,6 +810,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -862,6 +861,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -875,15 +875,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -909,10 +903,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -949,6 +944,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -996,18 +992,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1016,6 +1015,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1140,7 +1140,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1153,7 +1152,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1245,6 +1243,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1271,6 +1270,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 21dad38..f67a8d1 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:26 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:50 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,10 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -110,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -315,6 +318,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
@@ -345,7 +349,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -522,6 +525,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_MDIO=y
@@ -575,6 +580,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -701,6 +707,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -732,6 +739,7 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
 
 #
@@ -915,6 +923,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -937,6 +946,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1036,6 +1046,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 5db54cd..61b122a 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:27 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:51 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -316,6 +315,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
@@ -346,7 +346,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -443,6 +442,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -477,6 +478,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -602,6 +604,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -788,6 +791,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -810,6 +814,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 76c7018..a5ceaa4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:28 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:52 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,14 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -319,6 +318,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -329,7 +329,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -358,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -455,6 +453,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_MDIO=y
@@ -500,6 +500,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -609,6 +610,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -621,6 +624,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -700,6 +704,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -733,7 +738,9 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -793,6 +800,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -801,6 +810,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -927,6 +937,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -949,6 +960,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index fab8ada..4adb4eb 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:53 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -317,6 +316,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -327,7 +327,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -356,7 +355,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -453,6 +451,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -552,6 +552,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -657,6 +658,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -669,6 +672,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -753,6 +757,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -817,6 +822,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -825,6 +831,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -951,6 +958,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -973,6 +981,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 8290385..3de8450 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -314,6 +313,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -324,7 +324,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -352,7 +351,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -447,6 +445,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -491,6 +491,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -596,6 +597,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -608,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -692,6 +696,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -756,6 +761,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -764,6 +770,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -856,6 +863,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -878,6 +886,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 2499b5b..bd467fe 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:30 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -314,6 +313,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
@@ -344,7 +344,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -441,6 +440,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -475,6 +476,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -600,6 +602,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -815,6 +818,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -837,6 +841,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index e2edb79..9803e03 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:31 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:55 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -319,6 +318,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -329,7 +329,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -355,7 +354,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -554,6 +552,8 @@ CONFIG_MTD_NAND_SOCRATES=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
@@ -591,6 +591,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -610,6 +611,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -867,6 +869,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -916,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -929,15 +933,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -979,10 +977,11 @@ CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1021,6 +1020,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1050,21 +1050,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1073,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1180,6 +1184,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1194,12 +1199,16 @@ CONFIG_USB_HID=y
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1307,7 +1316,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1320,7 +1328,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1491,6 +1498,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1515,6 +1523,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index ce31325..880ab7aa 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:32 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:56 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,14 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -324,6 +323,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -334,7 +334,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -363,7 +362,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -520,6 +518,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
@@ -563,6 +563,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -630,6 +631,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=m
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
@@ -817,6 +819,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -829,6 +833,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -947,6 +952,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1004,6 +1010,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1017,15 +1024,9 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1041,14 +1042,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1081,10 +1086,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1122,6 +1128,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1155,9 +1162,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1166,6 +1174,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_AGP=m
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 CONFIG_DRM=m
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
@@ -1308,6 +1317,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1333,6 +1343,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 0824b46..230aa2f 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:33 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:57 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -315,6 +314,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -325,7 +325,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -351,7 +350,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -525,6 +523,8 @@ CONFIG_MTD_CFI_UTIL=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -560,6 +560,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -632,6 +633,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -704,6 +706,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -755,6 +758,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -767,6 +772,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -851,6 +857,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -902,6 +909,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -913,15 +921,9 @@ CONFIG_I2C_MPC=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -947,10 +949,11 @@ CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -987,6 +990,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1015,18 +1019,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1035,6 +1042,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1172,6 +1180,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1194,6 +1203,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 2137be4..dbe04b9 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:34 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:58 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,14 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -636,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -760,6 +763,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -772,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@ CONFIG_I2C_MPC=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -946,14 +948,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -986,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1076,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 5cc89aa..845efa7 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:35 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:59 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -67,6 +67,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -98,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -324,6 +323,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -339,7 +339,6 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -368,7 +367,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -559,6 +557,8 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -594,6 +594,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -611,6 +612,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -716,6 +718,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -728,6 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -812,6 +817,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -860,6 +866,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -872,15 +879,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -906,10 +907,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -946,6 +948,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -974,18 +977,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -994,6 +1000,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1162,6 +1169,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1184,6 +1192,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index e7b9148..b958136 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:00 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,14 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -636,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -760,6 +763,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -772,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@ CONFIG_I2C_MPC=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -946,14 +948,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -986,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1076,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a998e40..008bc97 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -99,14 +103,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -114,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -328,7 +328,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -354,7 +353,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -528,6 +526,8 @@ CONFIG_MTD_CFI_UTIL=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -564,6 +564,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -636,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -708,6 +710,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -760,6 +763,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -772,6 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -858,6 +864,7 @@ CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -912,6 +919,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -923,15 +931,9 @@ CONFIG_I2C_MPC=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -946,14 +948,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -986,10 +992,11 @@ CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1027,6 +1034,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1055,19 +1063,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1076,6 +1089,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1213,6 +1227,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1235,6 +1250,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index fc656af..2cf80db 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:37 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -69,6 +69,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -104,10 +108,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -115,6 +117,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -328,6 +331,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -343,7 +347,6 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -375,7 +378,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -600,6 +602,8 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -637,6 +641,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -654,6 +659,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -777,6 +783,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -1004,6 +1011,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1053,6 +1061,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1066,15 +1075,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1090,14 +1093,19 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1130,10 +1138,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=y
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1171,6 +1180,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1218,19 +1228,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1239,6 +1254,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1271,6 +1287,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1285,12 +1302,16 @@ CONFIG_USB_HID=y
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1386,7 +1407,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1398,7 +1418,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1423,11 +1442,11 @@ CONFIG_LEDS_GPIO_OF=y
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1506,6 +1525,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
 
 #
 # DMA Devices
@@ -1614,6 +1634,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1641,6 +1662,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1851,6 +1873,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index a85f927..b728a7d 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:43 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:07 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -102,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -117,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -340,13 +336,11 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
 # CONFIG_CARDBUS is not set
 
 #
@@ -382,7 +376,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -592,6 +585,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -629,6 +624,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
@@ -695,6 +691,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -819,6 +816,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -1059,6 +1057,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1116,6 +1115,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1129,15 +1129,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1152,14 +1146,18 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1192,10 +1190,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1233,6 +1232,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1281,19 +1281,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1302,6 +1307,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1334,6 +1340,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1349,14 +1356,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1463,7 +1475,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1476,7 +1487,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1557,7 +1567,62 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+# CONFIG_VME_CA91CX42 is not set
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
+
+#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
 
 #
 # File systems
@@ -1648,6 +1713,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1674,6 +1740,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1819,6 +1886,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index eb58dec..8e738de 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:05 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -102,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -117,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -340,13 +336,11 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
 # CONFIG_CARDBUS is not set
 
 #
@@ -382,7 +376,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -592,6 +585,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -629,6 +624,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
@@ -695,6 +691,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -1001,6 +998,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1058,6 +1056,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1071,15 +1070,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1094,14 +1087,18 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1134,10 +1131,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1175,6 +1173,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1223,19 +1222,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1244,6 +1248,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1276,6 +1281,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1291,14 +1297,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1405,7 +1416,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1418,7 +1428,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1590,6 +1599,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1616,6 +1626,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1761,6 +1772,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 4554d9b..59bf9e2 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:42 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:06 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -102,14 +102,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -117,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -265,7 +260,7 @@ CONFIG_MMIO_NVRAM=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -326,6 +321,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -341,7 +337,6 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -369,7 +364,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -552,6 +546,7 @@ CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -651,7 +646,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -671,13 +666,9 @@ CONFIG_MTD_BLOCK=y
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -688,7 +679,6 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 # CONFIG_MTD_CFI_STAA is not set
@@ -733,6 +723,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -770,6 +762,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
@@ -787,6 +780,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -910,6 +904,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -1160,6 +1155,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1209,6 +1205,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1222,15 +1219,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1246,14 +1237,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1286,10 +1281,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1327,6 +1323,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1375,19 +1372,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1396,6 +1398,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1428,6 +1431,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1443,14 +1447,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1557,7 +1566,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1570,7 +1578,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
 
@@ -1652,7 +1659,60 @@ CONFIG_RTC_DRV_RX8581=y
 #
 # TI VLYNQ
 #
-# CONFIG_STAGING is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+CONFIG_VME_BUS=y
+
+#
+# VME Bridge Drivers
+#
+# CONFIG_VME_CA91CX42 is not set
+CONFIG_VME_TSI148=y
+
+#
+# VME Device Drivers
+#
+# CONFIG_VME_USER is not set
+
+#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
 
 #
 # File systems
@@ -1729,7 +1789,18 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1756,6 +1827,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1828,7 +1900,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1874,6 +1946,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
@@ -1963,6 +2036,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index aab3bae..4e8b01e 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:39 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:03 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -112,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -320,6 +315,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -335,7 +331,6 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -362,7 +357,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -571,6 +565,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -605,6 +601,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -670,6 +667,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -792,6 +790,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -970,6 +969,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1017,6 +1017,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1029,15 +1030,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1062,18 +1057,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1082,6 +1080,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1434,6 +1433,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1461,6 +1461,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 727a8c8..20fde63 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:40 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:04 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,18 +97,13 @@ CONFIG_TREE_RCU=y
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -116,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -326,6 +322,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -337,7 +334,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -365,7 +361,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -498,6 +493,8 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -534,6 +531,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -551,6 +549,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -675,6 +674,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -799,6 +799,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -811,6 +813,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -920,6 +923,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -968,6 +972,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -981,15 +986,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1014,18 +1013,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1034,6 +1036,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1151,6 +1154,7 @@ CONFIG_SND_INTEL8X0=y
 CONFIG_SND_PPC=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
@@ -1170,6 +1174,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1185,14 +1190,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1300,7 +1310,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1313,7 +1322,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1475,6 +1483,7 @@ CONFIG_BEFS_FS=m
 # CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
@@ -1506,6 +1515,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1717,6 +1727,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 4fb04dd..74f714d 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:38 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:02 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -101,14 +101,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -116,6 +110,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -327,6 +322,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -342,7 +338,6 @@ CONFIG_PCIEAER=y
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -369,7 +364,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -552,6 +546,7 @@ CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -733,6 +728,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -768,6 +765,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -785,6 +783,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -1024,6 +1023,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1074,6 +1074,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1086,15 +1087,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1120,10 +1115,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1160,6 +1156,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1202,18 +1199,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1222,6 +1222,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1376,6 +1377,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1408,6 +1410,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1540,6 +1543,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1618,6 +1622,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 5c1dc76..a670cee 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:23:58 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:22 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -91,14 +91,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -307,6 +301,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -336,7 +331,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -505,6 +499,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -516,6 +512,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -664,6 +661,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -802,6 +800,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -826,6 +825,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -924,6 +924,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index b63cc38..851287e 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -87,8 +87,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 72137cd..b429a65 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -101,14 +101,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -121,6 +115,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -147,7 +142,6 @@ CONFIG_HAVE_PERF_EVENTS=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -158,7 +152,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -357,6 +350,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -365,7 +359,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -396,7 +389,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -527,6 +519,7 @@ CONFIG_IP_VS_PROTO_UDP=y
 CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
 
 #
 # IPVS scheduler
@@ -630,6 +623,7 @@ CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -690,7 +684,6 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -833,6 +826,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=m
 CONFIG_OF_MDIO=y
@@ -867,6 +862,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=m
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
@@ -1179,6 +1175,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1231,6 +1228,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MV64XXX=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1244,15 +1242,9 @@ CONFIG_I2C_MV64XXX=m
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1278,10 +1270,11 @@ CONFIG_SENSORS_ADM1026=m
 # CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1318,6 +1311,7 @@ CONFIG_SENSORS_SMSC47M1=m
 # CONFIG_SENSORS_SMSC47M192 is not set
 CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1369,9 +1363,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1380,6 +1374,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1413,7 +1408,6 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
@@ -1535,6 +1529,7 @@ CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
 # CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1549,6 +1544,7 @@ CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1561,7 +1557,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1574,7 +1569,6 @@ CONFIG_USB_LED=m
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 # CONFIG_USB_CXACRU is not set
@@ -1611,6 +1605,7 @@ CONFIG_INFINIBAND_SRP=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
 
 #
 # DMA Devices
@@ -1714,6 +1709,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 # CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
@@ -1742,6 +1738,7 @@ CONFIG_SUNRPC_XPRT_RDMA=m
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1817,7 +1814,7 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1833,9 +1830,11 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
@@ -1880,7 +1879,6 @@ CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_HIGHMEM=y
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -1903,16 +1901,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c6d2baa..9433719 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -83,8 +83,7 @@ CONFIG_CPUSETS=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index d212377..6be6c09 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -78,8 +78,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5094a65..2fdab66 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 7910541..6b70839 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -298,6 +297,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
@@ -308,7 +308,6 @@ CONFIG_PCI_8260=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -335,7 +334,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -537,6 +535,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_MDIO=y
@@ -566,6 +566,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -671,6 +672,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -683,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -737,6 +741,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -765,7 +770,9 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -804,6 +811,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -812,6 +821,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -869,6 +879,7 @@ CONFIG_AUTOFS4_FS=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 58f7ca7..1cee889 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:00 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -90,14 +90,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -306,6 +300,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -335,7 +330,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -504,6 +498,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -515,6 +511,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -616,6 +613,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -753,6 +751,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -777,6 +776,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 826a65d..57d3ffa 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -82,8 +82,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 942e119..1c2dbf0 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a211a79..a60d61b 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -73,7 +73,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 76982c5..151c8e1 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -81,8 +81,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 9a0c981..8ecacf7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:01 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:25 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -116,6 +110,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -328,6 +323,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -337,7 +333,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -364,7 +359,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -433,6 +427,7 @@ CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_HL=m
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
@@ -665,6 +660,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -700,6 +697,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -717,6 +715,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -840,6 +839,7 @@ CONFIG_ATA_SFF=y
 CONFIG_PATA_IT821X=y
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -954,6 +954,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -966,6 +968,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -1082,6 +1085,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1131,6 +1135,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1144,15 +1149,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1178,10 +1177,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1218,6 +1218,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1246,18 +1247,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1266,6 +1270,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1417,6 +1422,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
 # CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1430,6 +1436,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1442,7 +1449,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1455,7 +1461,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1620,6 +1625,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1651,6 +1657,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1723,9 +1730,11 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_HAS_IOMEM=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b24400..dc50eec 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -78,8 +78,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 4c2c877..b36ebb7 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:02 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:26 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -105,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -311,6 +311,7 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
@@ -321,7 +322,6 @@ CONFIG_PCI_8260=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -348,7 +348,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -536,6 +535,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -570,6 +571,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -704,6 +706,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -769,14 +772,9 @@ CONFIG_I2C_CPM=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -790,14 +788,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -829,19 +831,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -850,6 +857,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -908,6 +916,7 @@ CONFIG_AUTOFS4_FS=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1100,6 +1109,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 9e090f2..0dd5015 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:03 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:27 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -89,14 +89,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -104,6 +98,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -309,6 +304,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -337,7 +333,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -515,6 +510,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -542,6 +539,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -643,6 +641,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -801,6 +800,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -825,6 +825,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -892,6 +893,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
new file mode 100644
index 0000000..aa2654e
--- /dev/null
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -0,0 +1,1693 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Fri Feb  5 11:48:29 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC512x=y
+CONFIG_PPC_MPC5121=y
+CONFIG_MPC5121_ADS=y
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+# CONFIG_CAN_CALC_BITTIMING is not set
+CONFIG_CAN_MSCAN=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_MPC5121_NFC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_XIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_MPC5121_FEC=y
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_ADV_DEBUG=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+CONFIG_VIDEO_SAA711X=y
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_OF is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_FSL_DIU=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_MPC5121=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_MPC512X_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 61cf73d..f875ec2 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Dec 30 15:08:52 2009
+# Linux kernel version: 2.6.34-rc1
+# Wed Mar 10 14:38:54 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,30 +96,36 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -141,6 +147,7 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -320,6 +327,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -336,7 +344,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -363,7 +370,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -454,7 +460,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -554,6 +562,8 @@ CONFIG_MTD_UBI_BEB_RESERVE=1
 # UBI debugging options
 #
 # CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -732,6 +742,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
@@ -770,7 +781,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -929,6 +940,7 @@ CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -981,6 +993,7 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1010,9 +1023,9 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_MPC52xx is not set
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 # CONFIG_SPI_XILINX is not set
 # CONFIG_SPI_DESIGNWARE is not set
@@ -1036,14 +1049,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1080,10 +1097,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1123,6 +1141,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1147,6 +1166,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
 # CONFIG_WATCHDOG_RTAS is not set
@@ -1172,22 +1192,27 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1196,6 +1221,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 CONFIG_DRM=y
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
@@ -1309,32 +1335,46 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
-# CONFIG_HID_APPLE is not set
+CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
-# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1349,10 +1389,7 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -1433,7 +1470,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1445,7 +1481,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1636,6 +1671,7 @@ CONFIG_UBIFS_FS=m
 CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1730,8 +1766,11 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
@@ -1776,11 +1815,11 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 1315b77..b1e88fe 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:04 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:28 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,14 +94,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -109,6 +103,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -311,6 +306,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -319,7 +315,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -345,7 +340,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -440,6 +434,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -484,6 +480,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -605,6 +602,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -696,6 +694,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -750,6 +749,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -762,6 +763,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -846,6 +848,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -910,6 +913,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -918,6 +922,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1044,6 +1049,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1066,6 +1072,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 9073778..6875fb8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:05 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:29 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -301,6 +300,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
@@ -311,7 +311,6 @@ CONFIG_PCI_8260=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -338,7 +337,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -540,6 +538,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_MDIO=y
@@ -569,6 +569,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -674,6 +675,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -686,6 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -797,6 +801,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -825,7 +830,9 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -864,6 +871,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -872,6 +881,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -933,6 +943,7 @@ CONFIG_AUTOFS4_FS=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 05bec48..bbe5ae6 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:30 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -98,14 +98,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +107,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -126,7 +121,7 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
@@ -331,6 +326,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -344,7 +340,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -370,7 +365,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -560,6 +554,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -597,6 +593,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -614,6 +611,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -712,7 +710,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -737,6 +735,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -863,6 +862,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -875,6 +876,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -970,6 +972,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -980,8 +983,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1022,6 +1023,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1035,15 +1037,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1058,14 +1054,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1098,10 +1098,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1139,6 +1140,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1186,19 +1188,24 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1207,6 +1214,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1232,6 +1240,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1247,14 +1256,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1344,7 +1358,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1357,7 +1370,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1372,7 +1384,65 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -1453,6 +1523,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1479,6 +1550,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 8f35f80..cfebef9 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -68,6 +68,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -103,14 +107,8 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -118,6 +116,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -334,6 +333,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -345,7 +345,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -376,7 +375,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -509,6 +507,8 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -546,6 +546,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -563,6 +564,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -687,6 +689,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -817,8 +820,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_VXGE is not set
@@ -829,6 +835,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -941,6 +948,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -993,6 +1001,7 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1006,15 +1015,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1030,14 +1033,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1069,20 +1076,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1091,6 +1103,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1208,6 +1221,7 @@ CONFIG_SND_INTEL8X0=y
 CONFIG_SND_PPC=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
@@ -1227,6 +1241,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1242,14 +1257,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1358,7 +1378,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1371,7 +1390,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1452,6 +1470,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
 
 #
 # DMA Devices
@@ -1554,6 +1573,7 @@ CONFIG_BEFS_FS=m
 # CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
@@ -1585,6 +1605,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1730,6 +1751,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 8755ea3..f5451d8 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:07 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -69,6 +69,10 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -100,18 +104,13 @@ CONFIG_TREE_RCU=y
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -119,6 +118,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -338,6 +338,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -349,7 +350,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -380,7 +380,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -513,6 +512,8 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -550,6 +551,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -567,6 +569,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -691,6 +694,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -821,8 +825,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_VXGE is not set
@@ -833,6 +840,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -945,6 +953,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -997,6 +1006,7 @@ CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1010,15 +1020,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1034,14 +1038,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1073,20 +1081,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1095,6 +1108,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1212,6 +1226,7 @@ CONFIG_SND_INTEL8X0=y
 CONFIG_SND_PPC=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
@@ -1231,6 +1246,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1246,14 +1262,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1362,7 +1383,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1375,7 +1395,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1456,6 +1475,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
 
 #
 # DMA Devices
@@ -1558,6 +1578,7 @@ CONFIG_BEFS_FS=m
 # CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
@@ -1589,6 +1610,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1734,6 +1756,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1806,6 +1829,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3f6b11b..d8d3d1d 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:08 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:32 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -89,14 +89,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -305,6 +299,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -333,7 +328,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -425,6 +419,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -456,6 +452,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -607,6 +604,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -795,6 +793,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -819,6 +818,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 41884c9..624eae9 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:33 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -98,18 +98,13 @@ CONFIG_TREE_RCU=y
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -117,6 +112,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -328,6 +324,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -339,7 +336,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -367,7 +363,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -500,6 +495,8 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
@@ -537,6 +534,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -554,6 +552,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -678,6 +677,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -802,6 +802,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -814,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -923,6 +926,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -972,6 +976,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -985,15 +990,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1009,14 +1008,18 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1048,20 +1051,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1070,6 +1078,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1187,6 +1196,7 @@ CONFIG_SND_INTEL8X0=y
 CONFIG_SND_PPC=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
@@ -1206,6 +1216,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1221,14 +1232,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1336,7 +1352,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1349,7 +1364,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1512,6 +1526,7 @@ CONFIG_BEFS_FS=m
 # CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
@@ -1543,6 +1558,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1754,6 +1770,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 6b9e6bd..45bd499 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:10 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:34 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -90,14 +90,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -313,6 +307,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -342,7 +337,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -515,6 +509,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
@@ -526,6 +522,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -627,6 +624,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -764,6 +762,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -788,6 +787,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 20ba0cf..74a7216 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=64
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index ea8870a..753bb79 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -93,8 +93,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 326205c..afb4d1b 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:44:03 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 13:54:06 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@ CONFIG_40x=y
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -50,11 +54,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,9 +76,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -79,37 +99,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -121,6 +149,14 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,8 +168,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,19 +176,41 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -168,12 +225,14 @@ CONFIG_XILINX_VIRTEX=y
 CONFIG_ACADIA=y
 CONFIG_EP405=y
 CONFIG_HCU4=y
+CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
 CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_PPC40x_SIMPLE=y
 CONFIG_405GP=y
+CONFIG_405EP=y
 CONFIG_405EX=y
 CONFIG_405EZ=y
 CONFIG_405GPR=y
@@ -195,6 +254,7 @@ CONFIG_IBM405_ERR51=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
 # CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
 
 #
 # Kernel options
@@ -218,10 +278,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +299,12 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +329,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +347,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -341,6 +404,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -349,6 +413,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -362,6 +427,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,13 +441,13 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -393,6 +460,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -405,9 +473,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -483,7 +551,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -491,7 +558,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
 
 #
 # UBI debugging options
@@ -509,6 +576,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -520,14 +588,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,7 +626,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -568,6 +651,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -586,7 +671,10 @@ CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
 CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -594,6 +682,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -604,9 +693,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -616,6 +709,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -625,14 +719,13 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -645,6 +738,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -663,6 +757,7 @@ CONFIG_SERIO=m
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -697,6 +792,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -714,6 +810,7 @@ CONFIG_XILINX_HWICAP=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
@@ -756,11 +853,6 @@ CONFIG_I2C_IBM_IIC=m
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -769,20 +861,17 @@ CONFIG_I2C_IBM_IIC=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -804,11 +893,17 @@ CONFIG_GPIO_XILINX=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -832,28 +927,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -909,6 +991,7 @@ CONFIG_FB_XILINX=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -930,7 +1013,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -946,7 +1029,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -956,6 +1044,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -966,11 +1055,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -980,6 +1071,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1053,7 +1149,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1108,6 +1203,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1125,11 +1221,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1139,6 +1237,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1147,16 +1246,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1168,35 +1274,45 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1212,13 +1328,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1227,10 +1346,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1258,11 +1379,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1299,6 +1422,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1307,5 +1431,6 @@ CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 5e6d55f..bd3d23f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:43:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 13:42:17 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@ CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,11 +58,15 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -72,9 +80,21 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -83,37 +103,45 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -125,6 +153,13 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -136,8 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,20 +179,42 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -179,8 +235,11 @@ CONFIG_WARP=y
 CONFIG_ARCHES=y
 CONFIG_CANYONLANDS=y
 CONFIG_GLACIER=y
+CONFIG_REDWOOD=y
+CONFIG_EIGER=y
 CONFIG_YOSEMITE=y
 CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_XILINX_ML510 is not set
 CONFIG_PPC44x_SIMPLE=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
@@ -190,6 +249,7 @@ CONFIG_440GP=y
 CONFIG_440GX=y
 CONFIG_440SPe=y
 CONFIG_460EX=y
+CONFIG_460SX=y
 CONFIG_IBM440EP_ERR42=y
 CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_5_FXT=y
@@ -207,6 +267,7 @@ CONFIG_XILINX_VIRTEX_5_FXT=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
 # CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
 
 #
 # Kernel options
@@ -230,10 +291,12 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -249,10 +312,13 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +342,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,14 +360,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -352,6 +417,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -360,6 +426,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -375,6 +442,8 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -387,8 +456,13 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +475,7 @@ CONFIG_LLC=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -413,9 +488,9 @@ CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -490,7 +565,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,7 +572,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
 
 #
 # UBI debugging options
@@ -516,6 +590,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -528,14 +603,25 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
 CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +644,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -578,6 +660,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -587,7 +670,11 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -608,6 +695,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -626,7 +715,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -634,6 +726,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -644,9 +737,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -656,6 +753,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -665,14 +763,14 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -695,6 +793,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -713,6 +812,7 @@ CONFIG_SERIO=m
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -747,6 +847,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -764,6 +865,7 @@ CONFIG_XILINX_HWICAP=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
@@ -807,11 +909,6 @@ CONFIG_I2C_IBM_IIC=m
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,20 +917,17 @@ CONFIG_I2C_IBM_IIC=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -855,16 +949,21 @@ CONFIG_GPIO_XILINX=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -884,28 +983,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -961,6 +1047,7 @@ CONFIG_FB_XILINX=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -994,19 +1081,22 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1030,11 +1120,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1075,7 +1165,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1083,6 +1172,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1091,6 +1181,7 @@ CONFIG_USB_STORAGE=m
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1100,7 +1191,12 @@ CONFIG_USB_STORAGE=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,6 +1206,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1119,11 +1216,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1133,6 +1232,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1206,7 +1310,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1261,6 +1364,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1278,11 +1382,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1292,6 +1398,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1300,16 +1407,23 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1321,35 +1435,43 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1363,13 +1485,16 @@ CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1378,10 +1503,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1409,11 +1536,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1450,6 +1579,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 7b3804a..369f4e0 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -93,8 +93,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -137,8 +136,9 @@ CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -191,6 +191,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -328,9 +329,10 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -339,6 +341,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
@@ -354,11 +357,12 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -790,12 +794,12 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=m
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -867,9 +871,8 @@ CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -984,7 +987,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -1000,25 +1003,24 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_S2IO=m
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -1169,7 +1171,7 @@ CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_JSM=m
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -1586,7 +1588,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1686,21 +1688,22 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
 
@@ -1798,7 +1801,7 @@ CONFIG_REISERFS_FS=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=y
+CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
@@ -1811,14 +1814,22 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -1851,7 +1862,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -2075,7 +2086,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DISASSEMBLY=y
 CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 8195f16..403e82e 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -107,8 +107,7 @@ CONFIG_CPUSETS=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 5d06f2c..12c8ee8 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:11 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:35 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -105,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -304,6 +304,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PPC_PCI_CHOICE=y
@@ -315,7 +316,6 @@ CONFIG_PCI_8260=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -342,7 +342,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -544,6 +543,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_MDIO=y
@@ -629,6 +630,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -734,6 +736,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -746,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -859,6 +864,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -887,7 +893,9 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 # CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -926,6 +934,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -934,6 +944,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -996,6 +1007,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1051,6 +1063,7 @@ CONFIG_AUTOFS4_FS=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 57ab574..a18f597 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:12 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:36 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -117,6 +111,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -319,6 +314,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -327,7 +323,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -354,7 +349,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -533,6 +527,8 @@ CONFIG_MTD_PHYSMAP_OF=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -569,6 +565,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -640,6 +637,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -761,6 +759,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -854,6 +853,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_E100=y
@@ -907,6 +907,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -919,6 +921,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -1016,6 +1019,7 @@ CONFIG_SERIAL_MPSC_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -1065,6 +1069,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1077,15 +1082,9 @@ CONFIG_I2C_MV64XXX=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1111,10 +1110,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1151,6 +1151,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1179,18 +1180,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1199,6 +1203,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1231,6 +1236,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1247,14 +1253,19 @@ CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
@@ -1350,7 +1361,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1363,7 +1373,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1516,6 +1525,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1538,6 +1548,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1620,9 +1631,11 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7de127e..3808bc2 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Mon Aug 24 17:38:50 2009
+# Linux kernel version: 2.6.34-rc4
+# Thu Apr 15 11:32:15 2010
 #
 CONFIG_PPC64=y
 
@@ -9,6 +9,7 @@ CONFIG_PPC64=y
 # Processor support
 #
 CONFIG_PPC_BOOK3S_64=y
+# CONFIG_PPC_BOOK3E_64 is not set
 CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
@@ -35,7 +36,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +63,7 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,14 +90,15 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -108,6 +113,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -128,21 +134,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -154,12 +158,14 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -180,14 +186,41 @@ CONFIG_BLOCK_COMPAT=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -226,7 +259,6 @@ CONFIG_PPC_CELL=y
 #
 CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
-# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
@@ -267,7 +299,6 @@ CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-# CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 # CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -276,12 +307,15 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
 # CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -295,13 +329,12 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
 # CONFIG_MEMORY_HOTREMOVE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
@@ -312,11 +345,15 @@ CONFIG_PPC_4K_PAGES=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
 # CONFIG_PM_VERBOSE is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -324,6 +361,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
@@ -337,12 +375,12 @@ CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -392,6 +430,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -400,6 +439,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -422,7 +462,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -445,27 +484,30 @@ CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
@@ -481,6 +523,7 @@ CONFIG_MAC80211_RC_DEFAULT="pid"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -491,6 +534,8 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -498,6 +543,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -521,6 +570,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -590,31 +640,27 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AT76C50X_USB is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -632,6 +678,7 @@ CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
 # CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
@@ -666,6 +713,7 @@ CONFIG_SLHC=m
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -713,6 +761,8 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -736,7 +786,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -842,13 +891,13 @@ CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
 
 #
@@ -867,6 +916,7 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -877,17 +927,24 @@ CONFIG_HID_CHERRY=m
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+CONFIG_HID_TWINHAN=m
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
 CONFIG_HID_MICROSOFT=m
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 CONFIG_HID_SONY=m
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=m
 # CONFIG_HID_GREENASIA is not set
 CONFIG_HID_SMARTJOYPLUS=m
@@ -902,7 +959,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
@@ -910,7 +967,6 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -924,12 +980,13 @@ CONFIG_USB_MON=m
 # CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
@@ -996,7 +1053,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1009,7 +1065,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1049,7 +1104,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1078,10 +1135,10 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
@@ -1094,6 +1151,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1155,6 +1213,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1165,7 +1224,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1182,6 +1240,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1238,7 +1297,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1271,6 +1330,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1293,6 +1353,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
 CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_LOCKDEP=y
@@ -1309,26 +1370,27 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1353,13 +1415,16 @@ CONFIG_IRQSTACKS=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
@@ -1375,6 +1440,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
@@ -1403,11 +1469,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index ca9ff9a..16ae717 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -92,8 +92,7 @@ CONFIG_CPUSETS=y
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -159,7 +158,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -191,6 +190,7 @@ CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
 CONFIG_CMM=y
+CONFIG_DTL=y
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
@@ -255,7 +255,8 @@ CONFIG_KEXEC=y
 # CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
+CONFIG_NODES_SHIFT=8
+CONFIG_MAX_ACTIVE_REGIONS=256
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -270,7 +271,9 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
@@ -705,7 +708,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
+CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -800,7 +803,7 @@ CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -818,18 +821,18 @@ CONFIG_TIGON3=y
 # CONFIG_ATL1E is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=y
 # CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
+CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
 # CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
@@ -894,7 +897,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -1271,7 +1274,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1311,7 +1314,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -1322,7 +1325,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1377,17 +1380,17 @@ CONFIG_INFINIBAND_USER_MEM=y
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
+CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
+CONFIG_MLX4_INFINIBAND=m
 # CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_CM=y
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
+CONFIG_INFINIBAND_ISER=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -1443,6 +1446,9 @@ CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,8 +1461,8 @@ CONFIG_FUSE_FS=m
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1508,14 +1514,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -1681,12 +1687,12 @@ CONFIG_DYNAMIC_PRINTK_DEBUG=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index f2f8321..01be0e2 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan  6 09:24:13 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:37 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -94,14 +94,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -314,6 +308,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -323,7 +318,6 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -349,7 +343,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -524,6 +517,8 @@ CONFIG_MTD_PHYSMAP=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -555,6 +550,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -626,6 +622,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -846,6 +843,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -895,6 +893,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -908,15 +907,9 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -941,18 +934,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -961,6 +957,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_AGP is not set
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1071,7 +1068,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1084,7 +1080,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1251,6 +1246,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index c386828..ee054f8 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 98324c5..9a846ef 100644
--- a/arch/powerpc/include/asm/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -12,7 +12,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/types.h>
 #include <asm/page.h>
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 8f0fe79..2048a6a 100644
--- a/arch/powerpc/include/asm/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -2,6 +2,7 @@
 #define _ASM_POWERPC_ASM_COMPAT_H
 
 #include <asm/types.h>
+#include <asm/ppc-opcode.h>
 
 #ifdef __ASSEMBLY__
 #  define stringify_in_c(...)	__VA_ARGS__
@@ -20,13 +21,15 @@
 /* operations for longs and pointers */
 #define PPC_LL		stringify_in_c(ld)
 #define PPC_STL		stringify_in_c(std)
+#define PPC_STLU	stringify_in_c(stdu)
 #define PPC_LCMPI	stringify_in_c(cmpdi)
 #define PPC_LONG	stringify_in_c(.llong)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
 #define PPC_TLNEI	stringify_in_c(tdnei)
-#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LDARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
+#define PPC_LR_STKOFF	16
 
 /* Move to CR, single-entry optimized version. Only available
  * on POWER4 and later.
@@ -42,14 +45,16 @@
 /* operations for longs and pointers */
 #define PPC_LL		stringify_in_c(lwz)
 #define PPC_STL		stringify_in_c(stw)
+#define PPC_STLU	stringify_in_c(stwu)
 #define PPC_LCMPI	stringify_in_c(cmpwi)
 #define PPC_LONG	stringify_in_c(.long)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
 #define PPC_TLNEI	stringify_in_c(twnei)
-#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_LLARX(t, a, b, eh)	PPC_LWARX(t, a, b, eh)
 #define PPC_STLCX	stringify_in_c(stwcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzw)
 #define PPC_MTOCRF	stringify_in_c(mtcrf)
+#define PPC_LR_STKOFF	4
 
 #endif
 
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index 4012483..b8f152e 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# atomic_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -194,7 +194,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	int t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
@@ -202,7 +202,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 	PPC405_ERR77(0,%2)
 "	stwcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
@@ -227,7 +227,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
@@ -235,7 +235,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&b" (t)
 	: "r" (&v->counter)
@@ -286,12 +286,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_add_return\n\
 	add	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -320,12 +320,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
 	subf	%0,%1,%0\n\
 	stdcx.	%0,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (a), "r" (&v->counter)
 	: "cc", "memory");
@@ -352,12 +352,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
 	addic	%0,%0,1\n\
 	stdcx.	%0,0,%1 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -394,12 +394,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
 	addic	%0,%0,-1\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "xer", "memory");
@@ -419,13 +419,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
 	long t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
 	addic.	%0,%0,-1\n\
 	blt-	2f\n\
 	stdcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"	: "=&r" (t)
 	: "r" (&v->counter)
@@ -451,14 +451,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%1		# atomic_add_unless\n\
 	cmpd	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
 "	stdcx.	%0,0,%1 \n\
 	bne-	1b \n"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 "	subf	%0,%2,%0 \n\
 2:"
 	: "=&r" (t)
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 56f2f2e..30964ae 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -65,7 +65,7 @@ static __inline__ void fn(unsigned long mask,	\
 	unsigned long *p = (unsigned long *)_p;	\
 	__asm__ __volatile__ (			\
 	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
+"1:"	PPC_LLARX(%0,0,%3,0) "\n"		\
 	stringify_in_c(op) "%0,%0,%2\n"		\
 	PPC405_ERR77(0,%3)			\
 	PPC_STLCX "%0,0,%3\n"			\
@@ -78,7 +78,7 @@ static __inline__ void fn(unsigned long mask,	\
 
 DEFINE_BITOP(set_bits, or, "", "")
 DEFINE_BITOP(clear_bits, andc, "", "")
-DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER, "")
 DEFINE_BITOP(change_bits, xor, "", "")
 
 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
@@ -103,31 +103,35 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 
 /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
  * operands. */
-#define DEFINE_TESTOP(fn, op, prefix, postfix)	\
-static __inline__ unsigned long fn(		\
-		unsigned long mask,		\
-		volatile unsigned long *_p)	\
-{						\
-	unsigned long old, t;			\
-	unsigned long *p = (unsigned long *)_p;	\
-	__asm__ __volatile__ (			\
-	prefix					\
-"1:"	PPC_LLARX "%0,0,%3\n"			\
-	stringify_in_c(op) "%1,%0,%2\n"		\
-	PPC405_ERR77(0,%3)			\
-	PPC_STLCX "%1,0,%3\n"			\
-	"bne- 1b\n"				\
-	postfix					\
-	: "=&r" (old), "=&r" (t)		\
-	: "r" (mask), "r" (p)			\
-	: "cc", "memory");			\
-	return (old & mask);			\
+#define DEFINE_TESTOP(fn, op, prefix, postfix, eh)	\
+static __inline__ unsigned long fn(			\
+		unsigned long mask,			\
+		volatile unsigned long *_p)		\
+{							\
+	unsigned long old, t;				\
+	unsigned long *p = (unsigned long *)_p;		\
+	__asm__ __volatile__ (				\
+	prefix						\
+"1:"	PPC_LLARX(%0,0,%3,eh) "\n"			\
+	stringify_in_c(op) "%1,%0,%2\n"			\
+	PPC405_ERR77(0,%3)				\
+	PPC_STLCX "%1,0,%3\n"				\
+	"bne- 1b\n"					\
+	postfix						\
+	: "=&r" (old), "=&r" (t)			\
+	: "r" (mask), "r" (p)				\
+	: "cc", "memory");				\
+	return (old & mask);				\
 }
 
-DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
-DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "",
+	      PPC_ACQUIRE_BARRIER, 1)
+DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
+DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER,
+	      PPC_ACQUIRE_BARRIER, 0)
 
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
@@ -158,7 +162,7 @@ static __inline__ int test_and_change_bit(unsigned long nr,
 
 static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory");
 	__clear_bit(nr, addr);
 }
 
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index 2c15212..065c590 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -85,12 +85,12 @@
 	}							\
 } while (0)
 
-#define __WARN() do {						\
+#define __WARN_TAINT(taint) do {				\
 	__asm__ __volatile__(					\
 		"1:	twi 31,0,0\n"				\
 		_EMIT_BUG_ENTRY					\
 		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
+		  "i" (BUGFLAG_TAINT(taint)),			\
 		  "i" (sizeof(struct bug_entry)));		\
 } while (0)
 
@@ -104,7 +104,7 @@
 		"1:	"PPC_TLNEI"	%4,0\n"			\
 		_EMIT_BUG_ENTRY					\
 		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
+		  "i" (BUGFLAG_TAINT(TAINT_WARN)),		\
 		  "i" (sizeof(struct bug_entry)),		\
 		  "r" (__ret_warn_on));				\
 	}							\
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 3f41ab9..4b50941 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -12,8 +12,12 @@
 #define L1_CACHE_SHIFT		6
 #define MAX_COPY_PREFETCH	4
 #elif defined(CONFIG_PPC32)
-#define L1_CACHE_SHIFT		5
 #define MAX_COPY_PREFETCH	4
+#if defined(CONFIG_PPC_47x)
+#define L1_CACHE_SHIFT		7
+#else
+#define L1_CACHE_SHIFT		5
+#endif
 #else /* CONFIG_PPC64 */
 #define L1_CACHE_SHIFT		7
 #endif
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 4774c2f..396d21a 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -7,7 +7,8 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"ppc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 0835eb9..e50323f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -7,6 +7,30 @@
 #include <linux/of.h>
 
 /*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
+/*
  * USB Controller pram common to QE and CPM.
  */
 struct usb_ctlr {
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 81b0119..bd07650d 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 80f315e..b0b2113 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -70,8 +70,10 @@ struct pt_regs;
 extern int machine_check_generic(struct pt_regs *regs);
 extern int machine_check_4xx(struct pt_regs *regs);
 extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
 extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
+extern int machine_check_47x(struct pt_regs *regs);
 
 /* NOTE WELL: Update identify_cpu() if fields are added or removed! */
 struct cpu_spec {
@@ -365,6 +367,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
 #define CPU_FTRS_440x6	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_INDEXED_DCR)
+#define CPU_FTRS_47X	(CPU_FTRS_440x6)
 #define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
 	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_UNIFIED_ID_CACHE | CPU_FTR_NOEXECUTE)
@@ -381,9 +384,9 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
-#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | CPU_FTR_PPC_LE)
-#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | \
 	    CPU_FTR_IABR | \
 	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
 #define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
@@ -453,6 +456,9 @@ enum {
 #ifdef CONFIG_44x
 	    CPU_FTRS_44X | CPU_FTRS_440x6 |
 #endif
+#ifdef CONFIG_PPC_47x
+	    CPU_FTRS_47X |
+#endif
 #ifdef CONFIG_E200
 	    CPU_FTRS_E200 |
 #endif
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index fa19f3f..8bdc6a9 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -73,10 +73,9 @@ static inline unsigned long cputime_to_jiffies(const cputime_t ct)
 static inline cputime_t cputime_to_scaled(const cputime_t ct)
 {
 	if (cpu_has_feature(CPU_FTR_SPURR) &&
-	    per_cpu(cputime_last_delta, smp_processor_id()))
-		return ct *
-			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
-			per_cpu(cputime_last_delta, smp_processor_id());
+	    __get_cpu_var(cputime_last_delta))
+		return ct * __get_cpu_var(cputime_scaled_last_delta) /
+			    __get_cpu_var(cputime_last_delta);
 	return ct;
 }
 
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 6d94d27..a3954e4 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -10,9 +10,6 @@ struct dma_map_ops;
 struct device_node;
 
 struct dev_archdata {
-	/* Optional pointer to an OF device node */
-	struct device_node	*of_node;
-
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
 
@@ -30,19 +27,8 @@ struct dev_archdata {
 #endif
 };
 
-static inline void dev_archdata_set_node(struct dev_archdata *ad,
-					 struct device_node *np)
-{
-	ad->of_node = np;
-}
-
-static inline struct device_node *
-dev_archdata_get_node(const struct dev_archdata *ad)
-{
-	return ad->of_node;
-}
-
 struct pdev_archdata {
+	u64 dma_mask;
 };
 
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 80a973b..c85ef23 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -127,9 +127,6 @@ static inline int dma_supported(struct device *dev, u64 mask)
 	return dma_ops->dma_supported(dev, mask);
 }
 
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 17828ad..c376eda 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -235,14 +235,10 @@ typedef elf_vrregset_t elf_fpxregset_t;
 #ifdef __powerpc64__
 # define SET_PERSONALITY(ex)					\
 do {								\
-	unsigned long new_flags = 0;				\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
-		new_flags = _TIF_32BIT;				\
-	if ((current_thread_info()->flags & _TIF_32BIT)		\
-	    != new_flags)					\
-		set_thread_flag(TIF_ABI_PENDING);		\
+		set_thread_flag(TIF_32BIT);			\
 	else							\
-		clear_thread_flag(TIF_ABI_PENDING);		\
+		clear_thread_flag(TIF_32BIT);			\
 	if (personality(current->personality) != PER_LINUX32)	\
 		set_personality(PER_LINUX |			\
 			(current->personality & (~PER_MASK)));	\
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index cbd4dfa..96a7d06 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -165,7 +165,7 @@ label##2:						\
 	.pushsection sect,"a";				\
 	.align 2;					\
 label##3:					       	\
-	.long label##1b-label##3b;			\
+	FTR_ENTRY_OFFSET label##1b-label##3b;		\
 	.popsection;
 
 #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 9696cc3..7c589ef 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -11,7 +11,7 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
   __asm__ __volatile ( \
-	LWSYNC_ON_SMP \
+	PPC_RELEASE_BARRIER \
 "1:	lwarx	%0,0,%2\n" \
 	insn \
 	PPC405_ERR77(0, %2) \
@@ -90,14 +90,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 		return -EFAULT;
 
         __asm__ __volatile__ (
-        LWSYNC_ON_SMP
+        PPC_RELEASE_BARRIER
 "1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
         cmpw    0,%0,%3\n\
         bne-    3f\n"
         PPC405_ERR77(0,%2)
 "2:     stwcx.  %4,0,%2\n\
         bne-    1b\n"
-        ISYNC_ON_SMP
+        PPC_ACQUIRE_BARRIER
 "3:	.section .fixup,\"ax\"\n\
 4:	li	%0,%5\n\
 	b	3b\n\
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index fb3c05a..3147a29 100644
--- a/arch/powerpc/include/asm/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -1 +1,29 @@
-#include <asm-generic/hardirq.h>
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int timer_irqs;
+	unsigned int pmu_irqs;
+	unsigned int mce_exceptions;
+	unsigned int spurious_irqs;
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+
+#define local_softirq_pending()	__get_cpu_var(irq_stat).__softirq_pending
+
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu	arch_irq_stat_cpu
+
+#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index f027581..5119b7d 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -228,6 +228,7 @@
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
 #define H_ENABLE_CRQ		0x2B0
+#define H_GET_EM_PARMS		0x2B8
 #define H_SET_MPP		0x2D0
 #define H_GET_MPP		0x2D4
 #define MAX_HCALL_OPCODE	H_GET_MPP
@@ -281,6 +282,7 @@ long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
  */
 #define PLPAR_HCALL9_BUFSIZE 9
 long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
 
 /* For hcall instrumentation.  One structure per-hcall, per-CPU */
 struct hcall_stats {
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 9f4c9d4f..bd100fc 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -130,43 +130,5 @@ static inline int irqs_disabled_flags(unsigned long flags)
  */
 struct irq_chip;
 
-#ifdef CONFIG_PERF_EVENTS
-
-#ifdef CONFIG_PPC64
-static inline unsigned long test_perf_event_pending(void)
-{
-	unsigned long x;
-
-	asm volatile("lbz %0,%1(13)"
-		: "=r" (x)
-		: "i" (offsetof(struct paca_struct, perf_event_pending)));
-	return x;
-}
-
-static inline void set_perf_event_pending(void)
-{
-	asm volatile("stb %0,%1(13)" : :
-		"r" (1),
-		"i" (offsetof(struct paca_struct, perf_event_pending)));
-}
-
-static inline void clear_perf_event_pending(void)
-{
-	asm volatile("stb %0,%1(13)" : :
-		"r" (0),
-		"i" (offsetof(struct paca_struct, perf_event_pending)));
-}
-#endif /* CONFIG_PPC64 */
-
-#else  /* CONFIG_PERF_EVENTS */
-
-static inline unsigned long test_perf_event_pending(void)
-{
-	return 0;
-}
-
-static inline void clear_perf_event_pending(void) {}
-#endif /* CONFIG_PERF_EVENTS */
-
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index e054bae..ecba37a 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -358,7 +358,6 @@ extern void exc_lvl_ctx_init(void);
 #define exc_lvl_ctx_init()
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
@@ -369,11 +368,6 @@ extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
 extern void do_IRQ(struct pt_regs *regs);
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index 5ebfe5d..6857af5 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -3,8 +3,17 @@
 
 #include <asm/page.h>
 
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE	0x4000000
+#else
 #define KDUMP_KERNELBASE	0x2000000
+#endif
 
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 7e06b43..076327f 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,6 +2,18 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_FSL_BOOKE
+
+/*
+ * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
+ * and therefore we can only deal with memory within this range
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+
+#else
+
 /*
  * Maximum page that is mapped directly into kernel memory.
  * XXX: Since we copy virt we can use any page we allocate
@@ -21,6 +33,7 @@
 /* TASK_SIZE, probably left over from use_mm ?? */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 #endif
+#endif
 
 #define KEXEC_CONTROL_PAGE_SIZE 4096
 
@@ -31,6 +44,10 @@
 #define KEXEC_ARCH KEXEC_ARCH_PPC
 #endif
 
+#define KEXEC_STATE_NONE 0
+#define KEXEC_STATE_IRQS_OFF 1
+#define KEXEC_STATE_REAL_MODE 2
+
 #ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
 #include <asm/reg.h>
diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
index 9163695..bca8fdc 100644
--- a/arch/powerpc/include/asm/kmap_types.h
+++ b/arch/powerpc/include/asm/kmap_types.h
@@ -26,6 +26,7 @@ enum km_type {
 	KM_SOFTIRQ1,
 	KM_PPC_SYNC_PAGE,
 	KM_PPC_SYNC_ICACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
index 81f3b0b..6c5547d 100644
--- a/arch/powerpc/include/asm/kvm.h
+++ b/arch/powerpc/include/asm/kvm.h
@@ -77,4 +77,14 @@ struct kvm_debug_exit_arch {
 struct kvm_guest_debug_arch {
 };
 
+#define KVM_REG_MASK		0x001f
+#define KVM_REG_EXT_MASK	0xffe0
+#define KVM_REG_GPR		0x0000
+#define KVM_REG_FPR		0x0020
+#define KVM_REG_QPR		0x0040
+#define KVM_REG_FQPR		0x0060
+
+#define KVM_INTERRUPT_SET	-1U
+#define KVM_INTERRUPT_UNSET	-2U
+
 #endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index af2abe7..c5ea4cd 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -88,6 +88,8 @@
 
 #define BOOK3S_HFLAG_DCBZ32			0x1
 #define BOOK3S_HFLAG_SLB			0x2
+#define BOOK3S_HFLAG_PAIRED_SINGLE		0x4
+#define BOOK3S_HFLAG_NATIVE_PS			0x8
 
 #define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
@@ -97,4 +99,10 @@
 #define RESUME_HOST             RESUME_FLAG_HOST
 #define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
 
+#define KVM_GUEST_MODE_NONE	0
+#define KVM_GUEST_MODE_GUEST	1
+#define KVM_GUEST_MODE_SKIP	2
+
+#define KVM_INST_FETCH_FAILED	-1
+
 #endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 74b7369..6f74d93 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -22,45 +22,47 @@
 
 #include <linux/types.h>
 #include <linux/kvm_host.h>
-#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s_asm.h>
 
 struct kvmppc_slb {
 	u64 esid;
 	u64 vsid;
 	u64 orige;
 	u64 origv;
-	bool valid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool large;
-	bool class;
+	bool valid	: 1;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool large	: 1;	/* PTEs are 16MB */
+	bool tb		: 1;	/* 1TB segment */
+	bool class	: 1;
 };
 
 struct kvmppc_sr {
 	u32 raw;
 	u32 vsid;
-	bool Ks;
-	bool Kp;
-	bool nx;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool valid	: 1;
 };
 
 struct kvmppc_bat {
 	u64 raw;
 	u32 bepi;
 	u32 bepi_mask;
-	bool vs;
-	bool vp;
 	u32 brpn;
 	u8 wimg;
 	u8 pp;
+	bool vs		: 1;
+	bool vp		: 1;
 };
 
 struct kvmppc_sid_map {
 	u64 guest_vsid;
 	u64 guest_esid;
 	u64 host_vsid;
-	bool valid;
+	bool valid	: 1;
 };
 
 #define SID_MAP_BITS    9
@@ -69,6 +71,7 @@ struct kvmppc_sid_map {
 
 struct kvmppc_vcpu_book3s {
 	struct kvm_vcpu vcpu;
+	struct kvmppc_book3s_shadow_vcpu *shadow_vcpu;
 	struct kvmppc_sid_map sid_map[SID_MAP_NUM];
 	struct kvmppc_slb slb[64];
 	struct {
@@ -80,30 +83,32 @@ struct kvmppc_vcpu_book3s {
 	struct kvmppc_bat ibat[8];
 	struct kvmppc_bat dbat[8];
 	u64 hid[6];
+	u64 gqr[8];
 	int slb_nr;
+	u32 dsisr;
 	u64 sdr1;
-	u64 dsisr;
 	u64 hior;
 	u64 msr_mask;
 	u64 vsid_first;
 	u64 vsid_next;
 	u64 vsid_max;
 	int context_id;
+	ulong prog_flags; /* flags to inject when giving a 700 trap */
 };
 
 #define CONTEXT_HOST		0
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL	0xfffffffffff00000
-#define VSID_REAL_DR	0xffffffffffe00000
-#define VSID_REAL_IR	0xffffffffffd00000
-#define VSID_BAT	0xffffffffffc00000
-#define VSID_PR		0x8000000000000000
+#define VSID_REAL	0x1fffffffffc00000ULL
+#define VSID_BAT	0x1fffffffffb00000ULL
+#define VSID_REAL_DR	0x2000000000000000ULL
+#define VSID_REAL_IR	0x4000000000000000ULL
+#define VSID_PR		0x8000000000000000ULL
 
-extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
+extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong ea, ulong ea_mask);
 extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
-extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end);
+extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end);
 extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr);
 extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu);
 extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
@@ -111,14 +116,22 @@ extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte);
 extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
 extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
 extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
-extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data);
-extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr);
+extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
+extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
 extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
 			   bool upper, u32 val);
+extern void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr);
+extern int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu);
 
 extern u32 kvmppc_trampoline_lowmem;
 extern u32 kvmppc_trampoline_enter;
+extern void kvmppc_rmcall(ulong srr0, ulong srr1);
+extern void kvmppc_load_up_fpu(void);
+extern void kvmppc_load_up_altivec(void);
+extern void kvmppc_load_up_vsx(void);
+extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
+extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {
@@ -133,7 +146,108 @@ static inline ulong dsisr(void)
 }
 
 extern void kvm_return_point(void);
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu);
+
+static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
+{
+	if ( num < 14 ) {
+		to_svcpu(vcpu)->gpr[num] = val;
+		to_book3s(vcpu)->shadow_vcpu->gpr[num] = val;
+	} else
+		vcpu->arch.gpr[num] = val;
+}
+
+static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
+{
+	if ( num < 14 )
+		return to_svcpu(vcpu)->gpr[num];
+	else
+		return vcpu->arch.gpr[num];
+}
+
+static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
+{
+	to_svcpu(vcpu)->cr = val;
+	to_book3s(vcpu)->shadow_vcpu->cr = val;
+}
+
+static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->cr;
+}
+
+static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
+{
+	to_svcpu(vcpu)->xer = val;
+	to_book3s(vcpu)->shadow_vcpu->xer = val;
+}
+
+static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->xer;
+}
+
+static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->ctr = val;
+}
+
+static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->ctr;
+}
+
+static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->lr = val;
+}
+
+static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->lr;
+}
+
+static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->pc = val;
+}
+
+static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->pc;
+}
+
+static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
+{
+	ulong pc = kvmppc_get_pc(vcpu);
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	/* Load the instruction manually if it failed to do so in the
+	 * exit path */
+	if (svcpu->last_inst == KVM_INST_FETCH_FAILED)
+		kvmppc_ld(vcpu, &pc, sizeof(u32), &svcpu->last_inst, false);
+
+	return svcpu->last_inst;
+}
+
+static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->fault_dar;
+}
+
+/* Magic register values loaded into r3 and r4 before the 'sc' assembly
+ * instruction for the OSI hypercalls */
+#define OSI_SC_MAGIC_R3			0x113724FA
+#define OSI_SC_MAGIC_R4			0x77810F9B
 
 #define INS_DCBZ			0x7c0007ec
 
+/* Also add subarch specific defines */
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#include <asm/kvm_book3s_32.h>
+#else
+#include <asm/kvm_book3s_64.h>
+#endif
+
 #endif /* __ASM_KVM_BOOK3S_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_32.h b/arch/powerpc/include/asm/kvm_book3s_32.h
new file mode 100644
index 0000000..de604db
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_book3s_32.h
@@ -0,0 +1,42 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_32_H__
+#define __ASM_KVM_BOOK3S_32_H__
+
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
+{
+	return to_book3s(vcpu)->shadow_vcpu;
+}
+
+#define PTE_SIZE	12
+#define VSID_ALL	0
+#define SR_INVALID	0x00000001	/* VSID 1 should always be unused */
+#define SR_KP		0x20000000
+#define PTE_V		0x80000000
+#define PTE_SEC		0x00000040
+#define PTE_M		0x00000010
+#define PTE_R		0x00000100
+#define PTE_C		0x00000080
+
+#define SID_SHIFT	28
+#define ESID_MASK	0xf0000000
+#define VSID_MASK	0x00fffffff0000000ULL
+
+#endif /* __ASM_KVM_BOOK3S_32_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
new file mode 100644
index 0000000..4cadd61
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_64_H__
+#define __ASM_KVM_BOOK3S_64_H__
+
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
+{
+	return &get_paca()->shadow_vcpu;
+}
+
+#endif /* __ASM_KVM_BOOK3S_64_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_64_asm.h b/arch/powerpc/include/asm/kvm_book3s_64_asm.h
deleted file mode 100644
index 2e06ee8..0000000
--- a/arch/powerpc/include/asm/kvm_book3s_64_asm.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#ifndef __ASM_KVM_BOOK3S_ASM_H__
-#define __ASM_KVM_BOOK3S_ASM_H__
-
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-
-#include <asm/kvm_asm.h>
-
-.macro DO_KVM intno
-	.if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
-	    (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
-	    (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
-	    (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
-	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
-	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
-	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
-	    (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
-	    (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
-	    (\intno == BOOK3S_INTERRUPT_TRACE) || \
-	    (\intno == BOOK3S_INTERRUPT_PERFMON) || \
-	    (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
-	    (\intno == BOOK3S_INTERRUPT_VSX)
-
-	b	kvmppc_trampoline_\intno
-kvmppc_resume_\intno:
-
-	.endif
-.endm
-
-#else
-
-.macro DO_KVM intno
-.endm
-
-#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */
-
-#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
new file mode 100644
index 0000000..36fdb3a
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -0,0 +1,97 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_ASM_H__
+#define __ASM_KVM_BOOK3S_ASM_H__
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+
+#include <asm/kvm_asm.h>
+
+.macro DO_KVM intno
+	.if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
+	    (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
+	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
+	    (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
+	    (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
+	    (\intno == BOOK3S_INTERRUPT_TRACE) || \
+	    (\intno == BOOK3S_INTERRUPT_PERFMON) || \
+	    (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
+	    (\intno == BOOK3S_INTERRUPT_VSX)
+
+	b	kvmppc_trampoline_\intno
+kvmppc_resume_\intno:
+
+	.endif
+.endm
+
+#else
+
+.macro DO_KVM intno
+.endm
+
+#endif /* CONFIG_KVM_BOOK3S_HANDLER */
+
+#else  /*__ASSEMBLY__ */
+
+struct kvmppc_book3s_shadow_vcpu {
+	ulong gpr[14];
+	u32 cr;
+	u32 xer;
+
+	u32 fault_dsisr;
+	u32 last_inst;
+	ulong ctr;
+	ulong lr;
+	ulong pc;
+	ulong shadow_srr1;
+	ulong fault_dar;
+
+	ulong host_r1;
+	ulong host_r2;
+	ulong handler;
+	ulong scratch0;
+	ulong scratch1;
+	ulong vmhandler;
+	u8 in_guest;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	u32     sr[16];			/* Guest SRs */
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	u8 slb_max;			/* highest used guest slb entry */
+	struct  {
+		u64     esid;
+		u64     vsid;
+	} slb[64];			/* guest SLB */
+#endif
+};
+
+#endif /*__ASSEMBLY__ */
+
+#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_booke.h b/arch/powerpc/include/asm/kvm_booke.h
new file mode 100644
index 0000000..9c9ba3d
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_booke.h
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOKE_H__
+#define __ASM_KVM_BOOKE_H__
+
+#include <linux/types.h>
+#include <linux/kvm_host.h>
+
+static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
+{
+	vcpu->arch.gpr[num] = val;
+}
+
+static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
+{
+	return vcpu->arch.gpr[num];
+}
+
+static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
+{
+	vcpu->arch.cr = val;
+}
+
+static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.cr;
+}
+
+static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
+{
+	vcpu->arch.xer = val;
+}
+
+static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.xer;
+}
+
+static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.last_inst;
+}
+
+static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.ctr = val;
+}
+
+static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.ctr;
+}
+
+static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.lr = val;
+}
+
+static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.lr;
+}
+
+static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.pc = val;
+}
+
+static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.pc;
+}
+
+static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fault_dear;
+}
+
+#endif /* __ASM_KVM_BOOKE_H__ */
diff --git a/arch/powerpc/include/asm/kvm_e500.h b/arch/powerpc/include/asm/kvm_e500.h
index 9d497ce..7fea26f 100644
--- a/arch/powerpc/include/asm/kvm_e500.h
+++ b/arch/powerpc/include/asm/kvm_e500.h
@@ -52,9 +52,12 @@ struct kvmppc_vcpu_e500 {
 	u32 mas5;
 	u32 mas6;
 	u32 mas7;
+	u32 l1csr0;
 	u32 l1csr1;
 	u32 hid0;
 	u32 hid1;
+	u32 tlb0cfg;
+	u32 tlb1cfg;
 
 	struct kvm_vcpu vcpu;
 };
diff --git a/arch/powerpc/include/asm/kvm_fpu.h b/arch/powerpc/include/asm/kvm_fpu.h
new file mode 100644
index 0000000..94f05de
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_fpu.h
@@ -0,0 +1,85 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright Novell Inc. 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_FPU_H__
+#define __ASM_KVM_FPU_H__
+
+#include <linux/types.h>
+
+extern void fps_fres(struct thread_struct *t, u32 *dst, u32 *src1);
+extern void fps_frsqrte(struct thread_struct *t, u32 *dst, u32 *src1);
+extern void fps_fsqrts(struct thread_struct *t, u32 *dst, u32 *src1);
+
+extern void fps_fadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fdivs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fmuls(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+
+extern void fps_fmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		       u32 *src3);
+extern void fps_fmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		       u32 *src3);
+extern void fps_fnmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		        u32 *src3);
+extern void fps_fnmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		        u32 *src3);
+extern void fps_fsel(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		     u32 *src3);
+
+#define FPD_ONE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1);
+#define FPD_TWO_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1, u64 *src2);
+#define FPD_THREE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1, u64 *src2, u64 *src3);
+
+extern void fpd_fcmpu(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2);
+extern void fpd_fcmpo(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2);
+
+FPD_ONE_IN(fsqrts)
+FPD_ONE_IN(frsqrtes)
+FPD_ONE_IN(fres)
+FPD_ONE_IN(frsp)
+FPD_ONE_IN(fctiw)
+FPD_ONE_IN(fctiwz)
+FPD_ONE_IN(fsqrt)
+FPD_ONE_IN(fre)
+FPD_ONE_IN(frsqrte)
+FPD_ONE_IN(fneg)
+FPD_ONE_IN(fabs)
+FPD_TWO_IN(fadds)
+FPD_TWO_IN(fsubs)
+FPD_TWO_IN(fdivs)
+FPD_TWO_IN(fmuls)
+FPD_TWO_IN(fcpsgn)
+FPD_TWO_IN(fdiv)
+FPD_TWO_IN(fadd)
+FPD_TWO_IN(fmul)
+FPD_TWO_IN(fsub)
+FPD_THREE_IN(fmsubs)
+FPD_THREE_IN(fmadds)
+FPD_THREE_IN(fnmsubs)
+FPD_THREE_IN(fnmadds)
+FPD_THREE_IN(fsel)
+FPD_THREE_IN(fmsub)
+FPD_THREE_IN(fmadd)
+FPD_THREE_IN(fnmsub)
+FPD_THREE_IN(fnmadd)
+
+#endif
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 1201f62..0c9ad86 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -66,7 +66,7 @@ struct kvm_vcpu_stat {
 	u32 dec_exits;
 	u32 ext_intr_exits;
 	u32 halt_wakeup;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	u32 pf_storage;
 	u32 pf_instruc;
 	u32 sp_storage;
@@ -124,12 +124,12 @@ struct kvm_arch {
 };
 
 struct kvmppc_pte {
-	u64 eaddr;
+	ulong eaddr;
 	u64 vpage;
-	u64 raddr;
-	bool may_read;
-	bool may_write;
-	bool may_execute;
+	ulong raddr;
+	bool may_read		: 1;
+	bool may_write		: 1;
+	bool may_execute	: 1;
 };
 
 struct kvmppc_mmu {
@@ -145,7 +145,7 @@ struct kvmppc_mmu {
 	int  (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data);
 	void (*reset_msr)(struct kvm_vcpu *vcpu);
 	void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large);
-	int  (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid);
+	int  (*esid_to_vsid)(struct kvm_vcpu *vcpu, ulong esid, u64 *vsid);
 	u64  (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data);
 	bool (*is_dcbz32)(struct kvm_vcpu *vcpu);
 };
@@ -160,30 +160,51 @@ struct hpte_cache {
 struct kvm_vcpu_arch {
 	ulong host_stack;
 	u32 host_pid;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	ulong host_msr;
 	ulong host_r2;
 	void *host_retip;
 	ulong trampoline_lowmem;
 	ulong trampoline_enter;
 	ulong highmem_handler;
+	ulong rmcall;
 	ulong host_paca_phys;
 	struct kvmppc_mmu mmu;
 #endif
 
-	u64 fpr[32];
 	ulong gpr[32];
 
+	u64 fpr[32];
+	u64 fpscr;
+
+#ifdef CONFIG_ALTIVEC
+	vector128 vr[32];
+	vector128 vscr;
+#endif
+
+#ifdef CONFIG_VSX
+	u64 vsr[32];
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S
+	/* For Gekko paired singles */
+	u32 qpr[32];
+#endif
+
+#ifdef CONFIG_BOOKE
 	ulong pc;
-	u32 cr;
 	ulong ctr;
 	ulong lr;
+
 	ulong xer;
+	u32 cr;
+#endif
 
 	ulong msr;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	ulong shadow_msr;
 	ulong hflags;
+	ulong guest_owned_ext;
 #endif
 	u32 mmucr;
 	ulong sprg0;
@@ -236,18 +257,22 @@ struct kvm_vcpu_arch {
 	struct dentry *debugfs_exit_timing;
 #endif
 
+#ifdef CONFIG_BOOKE
 	u32 last_inst;
-#ifdef CONFIG_PPC64
-	ulong fault_dsisr;
-#endif
 	ulong fault_dear;
 	ulong fault_esr;
+	ulong queued_dear;
+	ulong queued_esr;
+#endif
 	gpa_t paddr_accessed;
 
 	u8 io_gpr; /* GPR used as IO source/target */
 	u8 mmio_is_bigendian;
+	u8 mmio_sign_extend;
 	u8 dcr_needed;
 	u8 dcr_is_write;
+	u8 osi_needed;
+	u8 osi_enabled;
 
 	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
 
@@ -256,7 +281,7 @@ struct kvm_vcpu_arch {
 	u64 dec_jiffies;
 	unsigned long pending_exceptions;
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
 	int hpte_cache_offset;
 #endif
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 269ee46..18d139e 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -28,12 +28,18 @@
 #include <linux/types.h>
 #include <linux/kvm_types.h>
 #include <linux/kvm_host.h>
+#ifdef CONFIG_PPC_BOOK3S
+#include <asm/kvm_book3s.h>
+#else
+#include <asm/kvm_booke.h>
+#endif
 
 enum emulation_result {
 	EMULATE_DONE,         /* no further processing */
 	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
 	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
 	EMULATE_FAIL,         /* can't emulate this instruction */
+	EMULATE_AGAIN,        /* something went wrong. go again */
 };
 
 extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
@@ -45,8 +51,11 @@ extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
 extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
                               unsigned int rt, unsigned int bytes,
                               int is_bigendian);
+extern int kvmppc_handle_loads(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                               unsigned int rt, unsigned int bytes,
+                               int is_bigendian);
 extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                               u32 val, unsigned int bytes, int is_bigendian);
+                               u64 val, unsigned int bytes, int is_bigendian);
 
 extern int kvmppc_emulate_instruction(struct kvm_run *run,
                                       struct kvm_vcpu *vcpu);
@@ -60,6 +69,7 @@ extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
 extern void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_init(struct kvm_vcpu *vcpu);
 extern int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
@@ -80,10 +90,13 @@ extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu);
 
 extern void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu);
 extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu);
-extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu);
+extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong flags);
 extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu);
+extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                        struct kvm_interrupt *irq);
+extern void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                         struct kvm_interrupt *irq);
 
 extern int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
                                   unsigned int op, int *advance);
@@ -95,4 +108,37 @@ extern void kvmppc_booke_exit(void);
 
 extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu);
 
+/*
+ * Cuts out inst bits with ordering according to spec.
+ * That means the leftmost bit is zero. All given bits are included.
+ */
+static inline u32 kvmppc_get_field(u64 inst, int msb, int lsb)
+{
+	u32 r;
+	u32 mask;
+
+	BUG_ON(msb > lsb);
+
+	mask = (1 << (lsb - msb + 1)) - 1;
+	r = (inst >> (63 - lsb)) & mask;
+
+	return r;
+}
+
+/*
+ * Replaces inst bits with ordering according to spec.
+ */
+static inline u32 kvmppc_set_field(u64 inst, int msb, int lsb, int value)
+{
+	u32 r;
+	u32 mask;
+
+	BUG_ON(msb > lsb);
+
+	mask = ((1 << (lsb - msb + 1)) - 1) << (63 - lsb);
+	r = (inst & ~mask) | ((value << (63 - lsb)) & mask);
+
+	return r;
+}
+
 #endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
deleted file mode 100644
index 6f5fdf0..0000000
--- a/arch/powerpc/include/asm/lmb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
index 84b457a..c2410af 100644
--- a/arch/powerpc/include/asm/local.h
+++ b/arch/powerpc/include/asm/local.h
@@ -24,7 +24,7 @@ static __inline__ long local_add_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_add_return\n\
 	add	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -43,7 +43,7 @@ static __inline__ long local_sub_return(long a, local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+"1:"	PPC_LLARX(%0,0,%2,0) "			# local_sub_return\n\
 	subf	%0,%1,%0\n"
 	PPC405_ERR77(0,%2)
 	PPC_STLCX	"%0,0,%2 \n\
@@ -60,7 +60,7 @@ static __inline__ long local_inc_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_inc_return\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1 \n\
@@ -87,7 +87,7 @@ static __inline__ long local_dec_return(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_return\n\
 	addic	%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
 	PPC_STLCX	"%0,0,%1\n\
@@ -117,7 +117,7 @@ static __inline__ int local_add_unless(local_t *l, long a, long u)
 	long t;
 
 	__asm__ __volatile__ (
-"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_add_unless\n\
 	cmpw	0,%0,%3 \n\
 	beq-	2f \n\
 	add	%0,%2,%0 \n"
@@ -147,7 +147,7 @@ static __inline__ long local_dec_if_positive(local_t *l)
 	long t;
 
 	__asm__ __volatile__(
-"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+"1:"	PPC_LLARX(%0,0,%1,0) "			# local_dec_if_positive\n\
 	cmpwi	%0,1\n\
 	addi	%0,%0,-1\n\
 	blt-	2f\n"
@@ -172,29 +172,4 @@ static __inline__ long local_dec_if_positive(local_t *l)
 #define __local_add(i,l)	((l)->a.counter+=(i))
 #define __local_sub(i,l)	((l)->a.counter-=(i))
 
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)	 	\
-	({ local_t res__;		\
-	   preempt_disable(); 		\
-	   res__ = (l);			\
-	   preempt_enable();		\
-	   res__; })
-#define cpu_local_wrap(l)		\
-	({ preempt_disable();		\
-	   l;				\
-	   preempt_enable(); })		\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l)	cpu_local_inc(l)
-#define __cpu_local_dec(l)	cpu_local_dec(l)
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
 #endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index a062c57..675e159 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -108,7 +108,7 @@ static inline void* macio_get_drvdata(struct macio_dev *dev)
 
 static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
 {
-	return mdev->ofdev.node;
+	return mdev->ofdev.dev.of_node;
 }
 
 #ifdef CONFIG_PCI
@@ -123,10 +123,6 @@ static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
  */
 struct macio_driver
 {
-	char			*name;
-	struct of_device_id	*match_table;
-	struct module		*owner;
-
 	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
 	int	(*remove)(struct macio_dev* dev);
 
diff --git a/arch/powerpc/include/asm/memblock.h b/arch/powerpc/include/asm/memblock.h
new file mode 100644
index 0000000..3c29728
--- /dev/null
+++ b/arch/powerpc/include/asm/memblock.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index 0372669..bf52d70 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -40,7 +40,7 @@
 #define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
 #define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
 #define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
-#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is little endian */
 
 #define PPC44x_TLB_PERM_MASK	0x0000003f
 #define PPC44x_TLB_UX		0x00000020      /* User execution */
@@ -53,6 +53,52 @@
 /* Number of TLB entries */
 #define PPC44x_TLB_SIZE		64
 
+/* 47x bits */
+#define PPC47x_MMUCR_TID	0x0000ffff
+#define PPC47x_MMUCR_STS	0x00010000
+
+/* Page identification fields */
+#define PPC47x_TLB0_EPN_MASK	0xfffff000      /* Effective Page Number */
+#define PPC47x_TLB0_VALID	0x00000800      /* Valid flag */
+#define PPC47x_TLB0_TS		0x00000400	/* Translation address space */
+#define PPC47x_TLB0_4K		0x00000000
+#define PPC47x_TLB0_16K		0x00000010
+#define PPC47x_TLB0_64K		0x00000030
+#define PPC47x_TLB0_1M		0x00000070
+#define PPC47x_TLB0_16M		0x000000f0
+#define PPC47x_TLB0_256M	0x000001f0
+#define PPC47x_TLB0_1G		0x000003f0
+#define PPC47x_TLB0_BOLTED_R	0x00000008	/* tlbre only */
+
+/* Translation fields */
+#define PPC47x_TLB1_RPN_MASK	0xfffff000      /* Real Page Number */
+#define PPC47x_TLB1_ERPN_MASK	0x000003ff
+
+/* Storage attribute and access control fields */
+#define PPC47x_TLB2_ATTR_MASK	0x0003ff80
+#define PPC47x_TLB2_IL1I	0x00020000      /* Memory is guarded */
+#define PPC47x_TLB2_IL1D	0x00010000      /* Memory is guarded */
+#define PPC47x_TLB2_U0		0x00008000      /* User 0 */
+#define PPC47x_TLB2_U1		0x00004000      /* User 1 */
+#define PPC47x_TLB2_U2		0x00002000      /* User 2 */
+#define PPC47x_TLB2_U3		0x00001000      /* User 3 */
+#define PPC47x_TLB2_W		0x00000800      /* Caching is write-through */
+#define PPC47x_TLB2_I		0x00000400      /* Caching is inhibited */
+#define PPC47x_TLB2_M		0x00000200      /* Memory is coherent */
+#define PPC47x_TLB2_G		0x00000100      /* Memory is guarded */
+#define PPC47x_TLB2_E		0x00000080      /* Memory is little endian */
+#define PPC47x_TLB2_PERM_MASK	0x0000003f
+#define PPC47x_TLB2_UX		0x00000020      /* User execution */
+#define PPC47x_TLB2_UW		0x00000010      /* User write */
+#define PPC47x_TLB2_UR		0x00000008      /* User read */
+#define PPC47x_TLB2_SX		0x00000004      /* Super execution */
+#define PPC47x_TLB2_SW		0x00000002      /* Super write */
+#define PPC47x_TLB2_SR		0x00000001      /* Super read */
+#define PPC47x_TLB2_U_RWX	(PPC47x_TLB2_UX|PPC47x_TLB2_UW|PPC47x_TLB2_UR)
+#define PPC47x_TLB2_S_RWX	(PPC47x_TLB2_SX|PPC47x_TLB2_SW|PPC47x_TLB2_SR)
+#define PPC47x_TLB2_S_RW	(PPC47x_TLB2_SW | PPC47x_TLB2_SR)
+#define PPC47x_TLB2_IMG		(PPC47x_TLB2_I | PPC47x_TLB2_M | PPC47x_TLB2_G)
+
 #ifndef __ASSEMBLY__
 
 extern unsigned int tlb_44x_hwater;
@@ -79,12 +125,15 @@ typedef struct {
 
 #if (PAGE_SHIFT == 12)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_4K
 #define mmu_virtual_psize	MMU_PAGE_4K
 #elif (PAGE_SHIFT == 14)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_16K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_16K
 #define mmu_virtual_psize	MMU_PAGE_16K
 #elif (PAGE_SHIFT == 16)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_64K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_64K
 #define mmu_virtual_psize	MMU_PAGE_64K
 #elif (PAGE_SHIFT == 18)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_256K
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2102b21..0e398cf 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -250,7 +250,9 @@ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+			       unsigned long vsid, unsigned long trap,
+			       int ssize, int psize, unsigned long pte);
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 7ffbb65..7ebf42e 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -18,6 +18,7 @@
 #define MMU_FTR_TYPE_44x		ASM_CONST(0x00000008)
 #define MMU_FTR_TYPE_FSL_E		ASM_CONST(0x00000010)
 #define MMU_FTR_TYPE_3E			ASM_CONST(0x00000020)
+#define MMU_FTR_TYPE_47x		ASM_CONST(0x00000040)
 
 /*
  * This is individual features
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 26383e0..81fb412 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -27,6 +27,8 @@ extern int __init_new_context(void);
 extern void __destroy_context(int context_id);
 static inline void mmu_context_init(void) { }
 #else
+extern unsigned long __init_new_context(void);
+extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 35acac9..aac87cb 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -30,7 +30,7 @@ extern struct pglist_data *node_data[];
  */
 
 extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
+extern cpumask_var_t node_to_cpumask_map[];
 #ifdef CONFIG_MEMORY_HOTPLUG
 extern unsigned long max_pfn;
 #endif
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
new file mode 100644
index 0000000..e6a30bb
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -0,0 +1,24 @@
+/*
+ * MPC5121 Prototypes and definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.
+ */
+
+#ifndef __ASM_POWERPC_MPC5121_H__
+#define __ASM_POWERPC_MPC5121_H__
+
+/* MPC512x Reset module registers */
+struct mpc512x_reset_module {
+	u32	rcwlr;	/* Reset Configuration Word Low Register */
+	u32	rcwhr;	/* Reset Configuration Word High Register */
+	u32	reserved1;
+	u32	reserved2;
+	u32	rsr;	/* Reset Status Register */
+	u32	rmr;	/* Reset Mode Register */
+	u32	rpr;	/* Reset Protection Register */
+	u32	rcr;	/* Reset Control Register */
+	u32	rcer;	/* Reset Control Enable Register */
+};
+
+#endif /* __ASM_POWERPC_MPC5121_H__ */
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index fb84120..ecc4fc6 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -25,7 +25,11 @@
 #include <asm/types.h>
 
 /* Max number of PSCs */
+#ifdef CONFIG_PPC_MPC512x
+#define MPC52xx_PSC_MAXNUM     12
+#else
 #define MPC52xx_PSC_MAXNUM	6
+#endif
 
 /* Programmable Serial Controller (PSC) status register bits */
 #define MPC52xx_PSC_SR_UNEX_RX	0x0001
@@ -244,6 +248,7 @@ struct mpc52xx_psc_fifo {
 	u16		tflwfptr;	/* PSC + 0x9e */
 };
 
+#define MPC512x_PSC_FIFO_EOF		0x100
 #define MPC512x_PSC_FIFO_RESET_SLICE	0x80
 #define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
 #define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index a002682..e000cce 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -289,7 +289,7 @@ struct mpic
 #ifdef CONFIG_MPIC_U3_HT_IRQS
 	/* The fixup table */
 	struct mpic_irq_fixup	*fixups;
-	spinlock_t		fixup_lock;
+	raw_spinlock_t	fixup_lock;
 #endif
 
 	/* Register access method */
@@ -463,9 +463,6 @@ extern void mpic_cpu_set_priority(int prio);
 /* Request IPIs on primary mpic */
 extern void mpic_request_ipis(void);
 
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
 /* Send a message (IPI) to a given target (cpu number or MSG_*) */
 void smp_mpic_message_pass(int target, int msg);
 
diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h
index dabc01c..5399f7e 100644
--- a/arch/powerpc/include/asm/mutex.h
+++ b/arch/powerpc/include/asm/mutex.h
@@ -15,7 +15,7 @@ static inline int __mutex_cmpxchg_lock(atomic_t *v, int old, int new)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%3,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (t)
@@ -35,7 +35,7 @@ static inline int __mutex_dec_return_lock(atomic_t *v)
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (t)
 	: "r" (&v->counter)
 	: "cc", "memory");
@@ -48,7 +48,7 @@ static inline int __mutex_inc_return_unlock(atomic_t *v)
 	int t;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%1		# mutex unlock\n\
 	addic	%0,%0,1\n"
 	PPC405_ERR77(0,%1)
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
index a64debf..444e97e 100644
--- a/arch/powerpc/include/asm/of_device.h
+++ b/arch/powerpc/include/asm/of_device.h
@@ -12,9 +12,8 @@
  */
 struct of_device
 {
-	struct device_node	*node;		/* to be obsoleted */
-	u64			dma_mask;	/* DMA mask */
 	struct device		dev;		/* Generic device interface */
+	struct pdev_archdata	archdata;
 };
 
 extern struct of_device *of_device_alloc(struct device_node *np,
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 5e9b4ef..8ce7963 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,11 +14,17 @@
 #define _ASM_POWERPC_PACA_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_PPC64
+
+#include <linux/init.h>
 #include <asm/types.h>
 #include <asm/lppaca.h>
 #include <asm/mmu.h>
 #include <asm/page.h>
 #include <asm/exception-64e.h>
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+#include <asm/kvm_book3s_asm.h>
+#endif
 
 register struct paca_struct *local_paca asm("r13");
 
@@ -76,6 +82,7 @@ struct paca_struct {
 	s16 hw_cpu_id;			/* Physical processor number */
 	u8 cpu_start;			/* At startup, processor spins until */
 					/* this becomes non-zero. */
+	u8 kexec_state;		/* set when kexec down has irqs off */
 #ifdef CONFIG_PPC_STD_MMU_64
 	struct slb_shadow *slb_shadow_ptr;
 
@@ -130,18 +137,25 @@ struct paca_struct {
 	u64 startpurr;			/* PURR/TB value snapshot */
 	u64 startspurr;			/* SPURR value snapshot */
 
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-	struct  {
-		u64     esid;
-		u64     vsid;
-	} kvm_slb[64];			/* guest SLB */
-	u8 kvm_slb_max;			/* highest used guest slb entry */
-	u8 kvm_in_guest;		/* are we inside the guest? */
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+	/* We use this to store guest state in */
+	struct kvmppc_book3s_shadow_vcpu shadow_vcpu;
 #endif
 };
 
-extern struct paca_struct paca[];
-extern void initialise_pacas(void);
+extern struct paca_struct *paca;
+extern __initdata struct paca_struct boot_paca;
+extern void initialise_paca(struct paca_struct *new_paca, int cpu);
+
+extern void allocate_pacas(void);
+extern void free_unused_pacas(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void allocate_pacas(void) { };
+static inline void free_unused_pacas(void) { };
+
+#endif /* CONFIG_PPC64 */
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index e96d52a..53b64be 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -108,8 +108,21 @@ extern phys_addr_t kernstart_addr;
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START))
+/*
+ * On Book-E parts we need __va to parse the device tree and we can't
+ * determine MEMORY_START until then.  However we can determine PHYSICAL_START
+ * from information at hand (program counter, TLB lookup).
+ *
+ * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
+ * the other definitions for __va & __pa.
+ */
+#ifdef CONFIG_BOOKE
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#else
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
 #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
+#endif
 
 /*
  * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h
index 094f63d..965d454 100644
--- a/arch/powerpc/include/asm/param.h
+++ b/arch/powerpc/include/asm/param.h
@@ -1,22 +1 @@
-#ifndef _ASM_POWERPC_PARAM_H
-#define _ASM_POWERPC_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif	/* _ASM_POWERPC_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
index 94942d6..1ca1102 100644
--- a/arch/powerpc/include/asm/parport.h
+++ b/arch/powerpc/include/asm/parport.h
@@ -19,6 +19,8 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
 	u32 io1, io2;
 	int propsize;
 	int count = 0;
+	int virq;
+
 	for (np = NULL; (np = of_find_compatible_node(np,
 						      "parallel",
 						      "pnpPNP,400")) != NULL;) {
@@ -26,10 +28,13 @@ static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
 		if (!prop || propsize > 6*sizeof(u32))
 			continue;
 		io1 = prop[1]; io2 = prop[2];
-		prop = of_get_property(np, "interrupts", NULL);
-		if (!prop)
+
+		virq = irq_of_parse_and_map(np, 0);
+		if (virq == NO_IRQ)
 			continue;
-		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
+
+		if (parport_pc_probe_port(io1, io2, virq, autodma, NULL, 0)
+				!= NULL)
 			count++;
 	}
 	return count;
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index b5ea626..a20a9ad 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -141,38 +141,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 
 #define HAVE_PCI_LEGACY	1
 
-#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
-/*
- * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
- * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
- * so on are not nops.
- * and thus...
- */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
-#else /* 32-bit && coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
-#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
-
 #ifdef CONFIG_PPC64
 
 /* The PCI address space does not equal the physical memory address
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 3288ce3..e6d4ce6 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -1,110 +1,23 @@
 /*
- * Performance event support - PowerPC-specific definitions.
+ * Performance event support - hardware-specific disambiguation
  *
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * For now this is a compile-time decision, but eventually it should be
+ * runtime.  This would allow multiplatform perf event support for e300 (fsl
+ * embedded perf counters) plus server/classic, and would accommodate
+ * devices other than the core which provide their own performance counters.
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-#include <linux/types.h>
-
-#include <asm/hw_irq.h>
-
-#define MAX_HWEVENTS		8
-#define MAX_EVENT_ALTERNATIVES	8
-#define MAX_LIMITED_HWCOUNTERS	2
-
-/*
- * This struct provides the constants and functions needed to
- * describe the PMU on a particular POWER-family CPU.
- */
-struct power_pmu {
-	const char	*name;
-	int		n_counter;
-	int		max_alternatives;
-	unsigned long	add_fields;
-	unsigned long	test_adder;
-	int		(*compute_mmcr)(u64 events[], int n_ev,
-				unsigned int hwc[], unsigned long mmcr[]);
-	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
-				unsigned long *valp);
-	int		(*get_alternatives)(u64 event_id, unsigned int flags,
-				u64 alt[]);
-	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
-	int		(*limited_pmc_event)(u64 event_id);
-	u32		flags;
-	int		n_generic;
-	int		*generic_events;
-	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-			       [PERF_COUNT_HW_CACHE_OP_MAX]
-			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/*
- * Values for power_pmu.flags
- */
-#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
-#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
-
-/*
- * Values for flags to get_alternatives()
- */
-#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
-#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
-#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
-
-extern int register_power_pmu(struct power_pmu *);
 
-struct pt_regs;
-extern unsigned long perf_misc_flags(struct pt_regs *regs);
-extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
-
-#define PERF_EVENT_INDEX_OFFSET	1
-
-/*
- * Only override the default definitions in include/linux/perf_event.h
- * if we have hardware PMU support.
- */
 #ifdef CONFIG_PPC_PERF_CTRS
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#include <asm/perf_event_server.h>
 #endif
 
-/*
- * The power_pmu.get_constraint function returns a 32/64-bit value and
- * a 32/64-bit mask that express the constraints between this event_id and
- * other events.
- *
- * The value and mask are divided up into (non-overlapping) bitfields
- * of three different types:
- *
- * Select field: this expresses the constraint that some set of bits
- * in MMCR* needs to be set to a specific value for this event_id.  For a
- * select field, the mask contains 1s in every bit of the field, and
- * the value contains a unique value for each possible setting of the
- * MMCR* bits.  The constraint checking code will ensure that two events
- * that set the same field in their masks have the same value in their
- * value dwords.
- *
- * Add field: this expresses the constraint that there can be at most
- * N events in a particular class.  A field of k bits can be used for
- * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
- * set (and the other bits 0), and the value has only the least significant
- * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
- * in the struct power_pmu for this processor come into play.  The
- * add_fields value contains 1 in the LSB of the field, and the
- * test_adder contains 2^(k-1) - 1 - N in the field.
- *
- * NAND field: this expresses the constraint that you may not have events
- * in all of a set of classes.  (For example, on PPC970, you can't select
- * events from the FPU, ISU and IDU simultaneously, although any two are
- * possible.)  For N classes, the field is N+1 bits wide, and each class
- * is assigned one bit from the least-significant N bits.  The mask has
- * only the most-significant bit set, and the value has only the bit
- * for the event_id's class set.  The test_adder has the least significant
- * bit set in the field.
- *
- * If an event_id is not subject to the constraint expressed by a particular
- * field, then it will have 0 in both the mask and value for that field.
- */
+#ifdef CONFIG_FSL_EMB_PERF_EVENT
+#include <asm/perf_event_fsl_emb.h>
+#endif
diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h
new file mode 100644
index 0000000..718a9fa
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h
@@ -0,0 +1,50 @@
+/*
+ * Performance event support - Freescale embedded specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS 4
+
+/* event flags */
+#define FSL_EMB_EVENT_VALID      1
+#define FSL_EMB_EVENT_RESTRICTED 2
+
+/* upper half of event flags is PMLCb */
+#define FSL_EMB_EVENT_THRESHMUL  0x0000070000000000ULL
+#define FSL_EMB_EVENT_THRESH     0x0000003f00000000ULL
+
+struct fsl_emb_pmu {
+	const char	*name;
+	int		n_counter; /* total number of counters */
+
+	/*
+	 * The number of contiguous counters starting at zero that
+	 * can hold restricted events, or zero if there are no
+	 * restricted events.
+	 *
+	 * This isn't a very flexible method of expressing constraints,
+	 * but it's very simple and is adequate for existing chips.
+	 */
+	int		n_restricted;
+
+	/* Returns event flags and PMLCb (FSL_EMB_EVENT_*) */
+	u64		(*xlate_event)(u64 event_id);
+
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *);
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
new file mode 100644
index 0000000..8f1df12
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -0,0 +1,110 @@
+/*
+ * Performance event support - PowerPC classic/server specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS		8
+#define MAX_EVENT_ALTERNATIVES	8
+#define MAX_LIMITED_HWCOUNTERS	2
+
+/*
+ * This struct provides the constants and functions needed to
+ * describe the PMU on a particular POWER-family CPU.
+ */
+struct power_pmu {
+	const char	*name;
+	int		n_counter;
+	int		max_alternatives;
+	unsigned long	add_fields;
+	unsigned long	test_adder;
+	int		(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[]);
+	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
+				unsigned long *valp);
+	int		(*get_alternatives)(u64 event_id, unsigned int flags,
+				u64 alt[]);
+	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+	int		(*limited_pmc_event)(u64 event_id);
+	u32		flags;
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
+
+/*
+ * Values for flags to get_alternatives()
+ */
+#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
+#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
+#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
+
+extern int register_power_pmu(struct power_pmu *);
+
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
+#define PERF_EVENT_INDEX_OFFSET	1
+
+/*
+ * Only override the default definitions in include/linux/perf_event.h
+ * if we have hardware PMU support.
+ */
+#ifdef CONFIG_PPC_PERF_CTRS
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#endif
+
+/*
+ * The power_pmu.get_constraint function returns a 32/64-bit value and
+ * a 32/64-bit mask that express the constraints between this event_id and
+ * other events.
+ *
+ * The value and mask are divided up into (non-overlapping) bitfields
+ * of three different types:
+ *
+ * Select field: this expresses the constraint that some set of bits
+ * in MMCR* needs to be set to a specific value for this event_id.  For a
+ * select field, the mask contains 1s in every bit of the field, and
+ * the value contains a unique value for each possible setting of the
+ * MMCR* bits.  The constraint checking code will ensure that two events
+ * that set the same field in their masks have the same value in their
+ * value dwords.
+ *
+ * Add field: this expresses the constraint that there can be at most
+ * N events in a particular class.  A field of k bits can be used for
+ * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
+ * set (and the other bits 0), and the value has only the least significant
+ * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
+ * in the struct power_pmu for this processor come into play.  The
+ * add_fields value contains 1 in the LSB of the field, and the
+ * test_adder contains 2^(k-1) - 1 - N in the field.
+ *
+ * NAND field: this expresses the constraint that you may not have events
+ * in all of a set of classes.  (For example, on PPC970, you can't select
+ * events from the FPU, ISU and IDU simultaneously, although any two are
+ * possible.)  For N classes, the field is N+1 bits wide, and each class
+ * is assigned one bit from the least-significant N bits.  The mask has
+ * only the most-significant bit set, and the value has only the bit
+ * for the event_id's class set.  The test_adder has the least significant
+ * bit set in the field.
+ *
+ * If an event_id is not subject to the constraint expressed by a particular
+ * field, then it will have 0 in both the mask and value for that field.
+ */
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 605f5c5..292725c 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -11,6 +11,12 @@
 #include <linux/cpumask.h>
 #include <linux/percpu.h>
 
+struct vmemmap_backing {
+	struct vmemmap_backing *list;
+	unsigned long phys;
+	unsigned long virt_addr;
+};
+
 /*
  * Functions that deal with pagetables that could be at any level of
  * the table need to be passed an "index_size" so they know how to
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 55646ad..a7db96f 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -287,7 +287,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 #define pmd_page_vaddr(pmd)	\
 	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
 #else
 #define pmd_page_vaddr(pmd)	\
 	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 21207e5..89f1587 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -209,7 +209,7 @@ extern void paging_init(void);
  * corresponding HPTE into the hash table ahead of time, instead of
  * waiting for the inevitable extra hash-table miss exception.
  */
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
 
 extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
 		      unsigned long end, int write, struct page **pages, int *nr);
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
index 877c35a..00eedc5 100644
--- a/arch/powerpc/include/asm/pmac_feature.h
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -378,7 +378,7 @@ extern struct macio_chip* macio_find(struct device_node* child, int type);
  * Those are exported by pmac feature for internal use by arch code
  * only like the platform function callbacks, do not use directly in drivers
  */
-extern spinlock_t feature_lock;
+extern raw_spinlock_t feature_lock;
 extern struct device_node *uninorth_node;
 extern u32 __iomem *uninorth_base;
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index ef9aa84..d553bbe 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -22,8 +22,10 @@
 #define PPC_INST_DCBZL			0x7c2007ec
 #define PPC_INST_ISEL			0x7c00001e
 #define PPC_INST_ISEL_MASK		0xfc00003e
+#define PPC_INST_LDARX			0x7c0000a8
 #define PPC_INST_LSWI			0x7c0004aa
 #define PPC_INST_LSWX			0x7c00042a
+#define PPC_INST_LWARX			0x7c000028
 #define PPC_INST_LWSYNC			0x7c2004ac
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
@@ -55,15 +57,31 @@
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
 #define __PPC_RS(s)	(((s) & 0x1f) << 21)
+#define __PPC_RT(s)	__PPC_RS(s)
 #define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
+/*
+ * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
+ * larx with EH set as an illegal instruction.
+ */
+#ifdef CONFIG_PPC64
+#define __PPC_EH(eh)	(((eh) & 0x1) << 0)
+#else
+#define __PPC_EH(eh)	0
+#endif
 
 /* Deal with instructions that older assemblers aren't aware of */
 #define	PPC_DCBAL(a, b)		stringify_in_c(.long PPC_INST_DCBAL | \
 					__PPC_RA(a) | __PPC_RB(b))
 #define	PPC_DCBZL(a, b)		stringify_in_c(.long PPC_INST_DCBZL | \
 					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_LDARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LDARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
+#define PPC_LWARX(t, a, b, eh)	stringify_in_c(.long PPC_INST_LWARX | \
+					__PPC_RT(t) | __PPC_RA(a) | \
+					__PPC_RB(b) | __PPC_EH(eh))
 #define PPC_MSGSND(b)		stringify_in_c(.long PPC_INST_MSGSND | \
 					__PPC_RB(b))
 #define PPC_RFCI		stringify_in_c(.long PPC_INST_RFCI)
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 2828f9d..42fdff0 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -137,6 +137,11 @@ struct device_node * find_device_pe(struct device_node *dn);
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);
 
+static inline const char *eeh_pci_name(struct pci_dev *pdev) 
+{ 
+	return pdev ? pci_name(pdev) : "<null>";
+} 
+
 #endif /* CONFIG_EEH */
 
 #else /* CONFIG_PCI */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 9eed29e..7492fe8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -161,9 +161,41 @@ struct thread_struct {
 #ifdef CONFIG_PPC32
 	void		*pgdir;		/* root of page-table tree */
 #endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	unsigned long	dbcr0;		/* debug control register values */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	/*
+	 * The following help to manage the use of Debug Control Registers
+	 * om the BookE platforms.
+	 */
+	unsigned long	dbcr0;
 	unsigned long	dbcr1;
+#ifdef CONFIG_BOOKE
+	unsigned long	dbcr2;
+#endif
+	/*
+	 * The stored value of the DBSR register will be the value at the
+	 * last debug interrupt. This register can only be read from the
+	 * user (will never be written to) and has value while helping to
+	 * describe the reason for the last debug trap.  Torez
+	 */
+	unsigned long	dbsr;
+	/*
+	 * The following will contain addresses used by debug applications
+	 * to help trace and trap on particular address locations.
+	 * The bits in the Debug Control Registers above help define which
+	 * of the following registers will contain valid data and/or addresses.
+	 */
+	unsigned long	iac1;
+	unsigned long	iac2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	unsigned long	iac3;
+	unsigned long	iac4;
+#endif
+	unsigned long	dac1;
+	unsigned long	dac2;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	unsigned long	dvc1;
+	unsigned long	dvc2;
+#endif
 #endif
 	/* FP and VSX 0-31 register set */
 	double		fpr[32][TS_FPRWIDTH];
@@ -197,6 +229,9 @@ struct thread_struct {
 	unsigned long	spefscr;	/* SPE & eFP status */
 	int		used_spe;	/* set if process has used spe */
 #endif /* CONFIG_SPE */
+#ifdef CONFIG_KVM_BOOK3S_32_HANDLER
+	void*		kvm_shadow_vcpu; /* KVM internal data */
+#endif /* CONFIG_KVM_BOOK3S_32_HANDLER */
 };
 
 #define ARCH_MIN_TASKALIGN 16
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 2ab9cbd..ddd408a 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -23,21 +23,8 @@
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
-
-#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-
-extern struct device_node *of_chosen;
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-
 #ifdef CONFIG_PPC32
 /*
  * PCI <-> OF matching functions
@@ -52,11 +39,6 @@ extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
 extern void pci_create_OF_bus_map(void);
 #endif
 
-extern struct resource *request_OF_resource(struct device_node* node,
-				int index, const char* name_postfix);
-extern int release_OF_resource(struct device_node* node, int index);
-
-
 /*
  * OF address retreival & translation
  */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index cbd759e..0175a67 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -24,6 +24,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
+
 #ifndef __ASSEMBLY__
 
 struct pt_regs {
@@ -83,6 +85,7 @@ struct pt_regs {
 
 #define instruction_pointer(regs) ((regs)->nip)
 #define user_stack_pointer(regs) ((regs)->gpr[1])
+#define kernel_stack_pointer(regs) ((regs)->gpr[1])
 #define regs_return_value(regs) ((regs)->gpr[3])
 
 #ifdef CONFIG_SMP
@@ -131,17 +134,73 @@ do {									      \
 } while (0)
 #endif /* __powerpc64__ */
 
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
 #define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
-extern void user_enable_single_step(struct task_struct *);
-extern void user_enable_block_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
 #define ARCH_HAS_USER_SINGLE_STEP_INFO
 
+/*
+ * kprobe-based event tracer support
+ */
+
+#include <linux/stddef.h>
+#include <linux/thread_info.h>
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, dsisr))
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+						unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+
+static inline bool regs_within_kernel_stack(struct pt_regs *regs,
+						unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
@@ -294,4 +353,75 @@ extern void user_disable_single_step(struct task_struct *);
 
 #define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
 
+#define PPC_PTRACE_GETHWDBGINFO	0x89
+#define PPC_PTRACE_SETHWDEBUG	0x88
+#define PPC_PTRACE_DELHWDEBUG	0x87
+
+#ifndef __ASSEMBLY__
+
+struct ppc_debug_info {
+	__u32 version;			/* Only version 1 exists to date */
+	__u32 num_instruction_bps;
+	__u32 num_data_bps;
+	__u32 num_condition_regs;
+	__u32 data_bp_alignment;
+	__u32 sizeof_condition;		/* size of the DVC register */
+	__u64 features;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * features will have bits indication whether there is support for:
+ */
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x0000000000000001
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x0000000000000002
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x0000000000000004
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x0000000000000008
+
+#ifndef __ASSEMBLY__
+
+struct ppc_hw_breakpoint {
+	__u32 version;		/* currently, version must be 1 */
+	__u32 trigger_type;	/* only some combinations allowed */
+	__u32 addr_mode;	/* address match mode */
+	__u32 condition_mode;	/* break/watchpoint condition flags */
+	__u64 addr;		/* break/watchpoint address */
+	__u64 addr2;		/* range end or mask */
+	__u64 condition_value;	/* contents of the DVC register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Trigger Type
+ */
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE	0x00000001
+#define PPC_BREAKPOINT_TRIGGER_READ	0x00000002
+#define PPC_BREAKPOINT_TRIGGER_WRITE	0x00000004
+#define PPC_BREAKPOINT_TRIGGER_RW	\
+	(PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE)
+
+/*
+ * Address Mode
+ */
+#define PPC_BREAKPOINT_MODE_EXACT		0x00000000
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE	0x00000001
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE	0x00000002
+#define PPC_BREAKPOINT_MODE_MASK		0x00000003
+
+/*
+ * Condition Mode
+ */
+#define PPC_BREAKPOINT_CONDITION_MODE	0x00000003
+#define PPC_BREAKPOINT_CONDITION_NONE	0x00000000
+#define PPC_BREAKPOINT_CONDITION_AND	0x00000001
+#define PPC_BREAKPOINT_CONDITION_EXACT	PPC_BREAKPOINT_CONDITION_AND
+#define PPC_BREAKPOINT_CONDITION_OR	0x00000002
+#define PPC_BREAKPOINT_CONDITION_AND_OR	0x00000003
+#define PPC_BREAKPOINT_CONDITION_BE_ALL	0x00ff0000
+#define PPC_BREAKPOINT_CONDITION_BE_SHIFT	16
+#define PPC_BREAKPOINT_CONDITION_BE(n)	\
+	(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
+
 #endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index bc8dd53..d62fdf4 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -293,10 +293,12 @@
 #define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
 #define HID1_PS		(1<<16)		/* 750FX PLL selection */
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_IABR2	0x3FA		/* 83xx */
 #define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
 #define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID4_GEKKO	0x3F3		/* Gekko HID4 */
 #define SPRN_HID5	0x3F6		/* 970 HID5 */
 #define SPRN_HID6	0x3F9	/* BE HID 6 */
 #define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
@@ -426,6 +428,10 @@
 #define   SRR1_WAKEMT		0x00280000 /* mtctrl */
 #define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
 #define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define   SRR1_PROGFPE		0x00100000 /* Floating Point Enabled */
+#define   SRR1_PROGPRIV		0x00040000 /* Privileged instruction */
+#define   SRR1_PROGTRAP		0x00020000 /* Trap */
+#define   SRR1_PROGADDR		0x00010000 /* SRR0 contains subsequent addr */
 #define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
 #define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
 
@@ -461,6 +467,14 @@
 #define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
 #define SPRN_XER	0x001	/* Fixed Point Exception Register */
 
+#define SPRN_MMCR0_GEKKO 0x3B8 /* Gekko Monitor Mode Control Register 0 */
+#define SPRN_MMCR1_GEKKO 0x3BC /* Gekko Monitor Mode Control Register 1 */
+#define SPRN_PMC1_GEKKO  0x3B9 /* Gekko Performance Monitor Control 1 */
+#define SPRN_PMC2_GEKKO  0x3BA /* Gekko Performance Monitor Control 2 */
+#define SPRN_PMC3_GEKKO  0x3BD /* Gekko Performance Monitor Control 3 */
+#define SPRN_PMC4_GEKKO  0x3BE /* Gekko Performance Monitor Control 4 */
+#define SPRN_WPAR_GEKKO  0x399 /* Gekko Write Pipe Address Register */
+
 #define SPRN_SCOMC	0x114	/* SCOM Access Control */
 #define SPRN_SCOMD	0x115	/* SCOM Access DATA */
 
@@ -813,6 +827,7 @@
 #define PVR_403GC	0x00200200
 #define PVR_403GCX	0x00201400
 #define PVR_405GP	0x40110000
+#define PVR_476		0x11a52000
 #define PVR_STB03XXX	0x40310000
 #define PVR_NP405H	0x41410000
 #define PVR_NP405L	0x41610000
@@ -849,6 +864,9 @@
 #define PVR_8245	0x80811014
 #define PVR_8260	PVR_8240
 
+/* 476 Simulator seems to currently have the PVR of the 602... */
+#define PVR_476_ISS	0x00052000
+
 /* 64-bit processors */
 /* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
 #define PV_NORTHSTAR	0x0033
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 3bf7835..2360317 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -4,6 +4,12 @@
  * are not true Book E PowerPCs, they borrowed a number of features
  * before Book E was finalized, and are included here as well.  Unfortunatly,
  * they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  */
 #ifdef __KERNEL__
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
 #define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
 #define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
 #define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU	0x239	/* Machine Check Address Register Upper */
 #define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
 #define SPRN_MCSR	0x23C	/* Machine Check Status Register */
@@ -191,9 +198,16 @@
 #define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
 #define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
 
+#define PPC47x_MCSR_GPR	0x01000000 /* GPR parity error */
+#define PPC47x_MCSR_FPR	0x00800000 /* FPR parity error */
+#define PPC47x_MCSR_IPR	0x00400000 /* Imprecise Machine Check Exception */
+
 #ifdef CONFIG_E500
+/* All e500 */
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
 #define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
 #define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
 #define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
@@ -205,12 +219,20 @@
 #define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
 #define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
 
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC	0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT	0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI	0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV	0x00080000UL /* MCAR address valid */
+#define MCSR_MEA	0x00040000UL /* MCAR is effective address */
+#define MCSR_IF		0x00010000UL /* Instruction Fetch */
+#define MCSR_LD		0x00008000UL /* Load */
+#define MCSR_ST		0x00004000UL /* Store */
+#define MCSR_LDG	0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC	0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR	0x00000001UL /* Backside L2 cache error */
 #endif
+
 #ifdef CONFIG_E200
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
@@ -221,11 +243,6 @@
 #define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
 #define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
 					store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-			MCSR_BUS_WRERR)
 #endif
 
 /* Bit definitions for the DBSR. */
@@ -248,6 +265,8 @@
 #define DBSR_RET	0x00008000	/* Return Debug Event */
 #define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
 #define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBSR_IAC12ATS	0x00000002	/* Instr Address Compare 1/2 Toggle */
+#define DBSR_IAC34ATS	0x00000001	/* Instr Address Compare 3/4 Toggle */
 #endif
 #ifdef CONFIG_40x
 #define DBSR_IC		0x80000000	/* Instruction Completion */
@@ -313,6 +332,38 @@
 #define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
 #define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+#define dbcr_iac_range(task)	((task)->thread.dbcr0)
+#define DBCR_IAC12I	DBCR0_IA12			/* Range Inclusive */
+#define DBCR_IAC12X	(DBCR0_IA12 | DBCR0_IA12X)	/* Range Exclusive */
+#define DBCR_IAC12MODE	(DBCR0_IA12 | DBCR0_IA12X)	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR0_IA34			/* Range Inclusive */
+#define DBCR_IAC34X	(DBCR0_IA34 | DBCR0_IA34X)	/* Range Exclusive */
+#define DBCR_IAC34MODE	(DBCR0_IA34 | DBCR0_IA34X)	/* IAC 3-4 Mode Bits */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_DAC1R	0x80000000	/* DAC1 Read Debug Event */
+#define DBCR1_DAC2R	0x40000000	/* DAC2 Read Debug Event */
+#define DBCR1_DAC1W	0x20000000	/* DAC1 Write Debug Event */
+#define DBCR1_DAC2W	0x10000000	/* DAC2 Write Debug Event */
+
+#define dbcr_dac(task)	((task)->thread.dbcr1)
+#define DBCR_DAC1R	DBCR1_DAC1R
+#define DBCR_DAC1W	DBCR1_DAC1W
+#define DBCR_DAC2R	DBCR1_DAC2R
+#define DBCR_DAC2W	DBCR1_DAC2W
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS	(DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+				 DBCR0_IAC3 | DBCR0_IAC4)
+#define DBCR1_ACTIVE_EVENTS	(DBCR1_DAC1R | DBCR1_DAC2R | \
+				 DBCR1_DAC1W | DBCR1_DAC2W)
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+
 #elif defined(CONFIG_BOOKE)
 #define DBCR0_EDM	0x80000000	/* External Debug Mode */
 #define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
@@ -342,19 +393,79 @@
 #define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
+#define dbcr_dac(task)	((task)->thread.dbcr0)
+#define DBCR_DAC1R	DBCR0_DAC1R
+#define DBCR_DAC1W	DBCR0_DAC1W
+#define DBCR_DAC2R	DBCR0_DAC2R
+#define DBCR_DAC2W	DBCR0_DAC2W
+
 /* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC1US	0xC0000000	/* Instr Addr Cmp 1 Sup/User   */
+#define DBCR1_IAC1ER	0x30000000	/* Instr Addr Cmp 1 Eff/Real */
+#define DBCR1_IAC1ER_01	0x10000000	/* reserved */
+#define DBCR1_IAC1ER_10	0x20000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC1ER_11	0x30000000	/* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC2US	0x0C000000	/* Instr Addr Cmp 2 Sup/User   */
+#define DBCR1_IAC2ER	0x03000000	/* Instr Addr Cmp 2 Eff/Real */
+#define DBCR1_IAC2ER_01	0x01000000	/* reserved */
+#define DBCR1_IAC2ER_10	0x02000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC2ER_11	0x03000000	/* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
 #define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
 #define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC3US	0x0000C000	/* Instr Addr Cmp 3 Sup/User   */
+#define DBCR1_IAC3ER	0x00003000	/* Instr Addr Cmp 3 Eff/Real */
+#define DBCR1_IAC3ER_01	0x00001000	/* reserved */
+#define DBCR1_IAC3ER_10	0x00002000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC3ER_11	0x00003000	/* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC4US	0x00000C00	/* Instr Addr Cmp 4 Sup/User   */
+#define DBCR1_IAC4ER	0x00000300	/* Instr Addr Cmp 4 Eff/Real */
+#define DBCR1_IAC4ER_01	0x00000100	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_10	0x00000200	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_11	0x00000300	/* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */
 #define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
 #define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
 #define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
 
+#define dbcr_iac_range(task)	((task)->thread.dbcr1)
+#define DBCR_IAC12I	DBCR1_IAC12M	/* Range Inclusive */
+#define DBCR_IAC12X	DBCR1_IAC12MX	/* Range Exclusive */
+#define DBCR_IAC12MODE	DBCR1_IAC12MX	/* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I	DBCR1_IAC34M	/* Range Inclusive */
+#define DBCR_IAC34X	DBCR1_IAC34MX	/* Range Exclusive */
+#define DBCR_IAC34MODE	DBCR1_IAC34MX	/* IAC 3-4 Mode Bits */
+
 /* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC1US	0xC0000000	/* Data Addr Cmp 1 Sup/User   */
+#define DBCR2_DAC1ER	0x30000000	/* Data Addr Cmp 1 Eff/Real */
+#define DBCR2_DAC2US	0x0C000000	/* Data Addr Cmp 2 Sup/User   */
+#define DBCR2_DAC2ER	0x03000000	/* Data Addr Cmp 2 Eff/Real */
 #define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MM	0x00400000	/* DAC 1-2 Mask mode*/
 #define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12MODE	0x00C00000	/* DAC 1-2 Mode Bits */
 #define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
-#endif
+#define DBCR2_DVC1M	0x000C0000	/* Data Value Comp 1 Mode */
+#define DBCR2_DVC1M_SHIFT	18	/* # of bits to shift DBCR2_DVC1M */
+#define DBCR2_DVC2M	0x00030000	/* Data Value Comp 2 Mode */
+#define DBCR2_DVC2M_SHIFT	16	/* # of bits to shift DBCR2_DVC2M */
+#define DBCR2_DVC1BE	0x00000F00	/* Data Value Comp 1 Byte */
+#define DBCR2_DVC1BE_SHIFT	8	/* # of bits to shift DBCR2_DVC1BE */
+#define DBCR2_DVC2BE	0x0000000F	/* Data Value Comp 2 Byte */
+#define DBCR2_DVC2BE_SHIFT	0	/* # of bits to shift DBCR2_DVC2BE */
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS  (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+			      DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \
+			      DBCR0_DAC1W  | DBCR0_DAC2R | DBCR0_DAC2W)
+#define DBCR1_ACTIVE_EVENTS	0
+
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1)  (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+					   ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+#endif /* #elif defined(CONFIG_BOOKE) */
 
 /* Bit definitions related to the TCR. */
 #define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
@@ -510,5 +621,25 @@
 #define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
 #define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
 #endif /* 403GCX */
+
+/* Some 476 specific registers */
+#define SPRN_SSPCR		830
+#define SPRN_USPCR		831
+#define SPRN_ISPCR		829
+#define SPRN_MMUBE0		820
+#define MMUBE0_IBE0_SHIFT	24
+#define MMUBE0_IBE1_SHIFT	16
+#define MMUBE0_IBE2_SHIFT	8
+#define MMUBE0_VBE0		0x00000004
+#define MMUBE0_VBE1		0x00000002
+#define MMUBE0_VBE2		0x00000001
+#define SPRN_MMUBE1		821
+#define MMUBE1_IBE3_SHIFT	24
+#define MMUBE1_IBE4_SHIFT	16
+#define MMUBE1_IBE5_SHIFT	8
+#define MMUBE1_VBE3		0x00000004
+#define MMUBE1_VBE4		0x00000002
+#define MMUBE1_VBE5		0x00000001
+
 #endif /* __ASM_POWERPC_REG_BOOKE_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 0de404d..77bb71c 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -31,7 +31,7 @@
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
 
-#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index 912bf59..34cc78f 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -9,38 +9,12 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __KERNEL__
-#include <linux/types.h>
 #include <asm/dma.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;
-
-	/* For TCE or SWIOTLB support */
-	dma_addr_t dma_address;
-	u32 dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
 
 #ifdef __powerpc64__
 #define ISA_DMA_THRESHOLD	(~0UL)
 #endif
-
 #define ARCH_HAS_SG_CHAIN
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 1d3b270..66e237b 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -40,7 +40,7 @@ extern void smp_message_recv(int);
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
 #ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
+extern void fixup_irqs(const struct cpumask *map);
 int generic_cpu_disable(void);
 int generic_cpu_enable(unsigned int cpu);
 void generic_cpu_die(unsigned int cpu);
@@ -68,8 +68,19 @@ static inline void set_hard_smp_processor_id(int cpu, int phys)
 }
 #endif
 
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+DECLARE_PER_CPU(cpumask_var_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_var_t, cpu_core_map);
+
+static inline struct cpumask *cpu_sibling_mask(int cpu)
+{
+	return per_cpu(cpu_sibling_map, cpu);
+}
+
+static inline struct cpumask *cpu_core_mask(int cpu)
+{
+	return per_cpu(cpu_core_map, cpu);
+}
+
 extern int cpu_to_core_id(int cpu);
 
 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
@@ -93,7 +104,6 @@ void smp_init_pSeries(void);
 void smp_init_cell(void);
 void smp_init_celleb(void);
 void smp_setup_cpu_maps(void);
-void smp_setup_cpu_sibling_map(void);
 
 extern int __cpu_disable(void);
 extern void __cpu_die(unsigned int cpu);
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index 764094c..f9611bd 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -27,6 +27,7 @@
 #endif
 #include <asm/asm-compat.h>
 #include <asm/synch.h>
+#include <asm/ppc-opcode.h>
 
 #define arch_spin_is_locked(x)		((x)->slock != 0)
 
@@ -60,13 +61,14 @@ static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock)
 
 	token = LOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n\
 	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"
+	: "=&r" (tmp)
 	: "r" (token), "r" (&lock->slock)
 	: "cr0", "memory");
 
@@ -144,7 +146,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	SYNC_IO;
 	__asm__ __volatile__("# arch_spin_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	lock->slock = 0;
 }
 
@@ -186,15 +188,15 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw)
 	long tmp;
 
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%1\n"
+"1:	" PPC_LWARX(%0,0,%1,1) "\n"
 	__DO_SIGN_EXTEND
 "	addic.		%0,%0,1\n\
 	ble-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%0,0,%1\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (&rw->lock)
 	: "cr0", "xer", "memory");
 
@@ -211,14 +213,14 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw)
 
 	token = WRLOCK_TOKEN;
 	__asm__ __volatile__(
-"1:	lwarx		%0,0,%2\n\
+"1:	" PPC_LWARX(%0,0,%2,1) "\n\
 	cmpwi		0,%0,0\n\
 	bne-		2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.		%1,0,%2\n\
-	bne-		1b\n\
-	isync\n\
-2:"	: "=&r" (tmp)
+	bne-		1b\n"
+	PPC_ACQUIRE_BARRIER
+"2:"	: "=&r" (tmp)
 	: "r" (token), "r" (&rw->lock)
 	: "cr0", "memory");
 
@@ -269,7 +271,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 
 	__asm__ __volatile__(
 	"# read_unlock\n\t"
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx		%0,0,%1\n\
 	addic		%0,%0,-1\n"
 	PPC405_ERR77(0,%1)
@@ -283,7 +285,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	__asm__ __volatile__("# write_unlock\n\t"
-				LWSYNC_ON_SMP: : :"memory");
+				PPC_RELEASE_BARRIER: : :"memory");
 	rw->lock = 0;
 }
 
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index 28f6ddb..d7cab44 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -37,11 +37,15 @@ static inline void isync(void)
 #endif
 
 #ifdef CONFIG_SMP
-#define ISYNC_ON_SMP	"\n\tisync\n"
-#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#define __PPC_ACQUIRE_BARRIER				\
+	START_LWSYNC_SECTION(97);			\
+	isync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
+#define PPC_ACQUIRE_BARRIER	"\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
+#define PPC_RELEASE_BARRIER	stringify_in_c(LWSYNC) "\n"
 #else
-#define ISYNC_ON_SMP
-#define LWSYNC_ON_SMP
+#define PPC_ACQUIRE_BARRIER
+#define PPC_RELEASE_BARRIER
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
index efa7f0b..23913e9 100644
--- a/arch/powerpc/include/asm/syscall.h
+++ b/arch/powerpc/include/asm/syscall.h
@@ -30,7 +30,7 @@ static inline void syscall_rollback(struct task_struct *task,
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+	return (regs->ccr & 0x10000000) ? -regs->gpr[3] : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
@@ -44,10 +44,10 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    int error, long val)
 {
 	if (error) {
-		regs->ccr |= 0x1000L;
+		regs->ccr |= 0x10000000L;
 		regs->gpr[3] = -error;
 	} else {
-		regs->ccr &= ~0x1000L;
+		regs->ccr &= ~0x10000000L;
 		regs->gpr[3] = val;
 	}
 }
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
index eb8eb40..4084e56 100644
--- a/arch/powerpc/include/asm/syscalls.h
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -7,7 +7,6 @@
 #include <linux/types.h>
 #include <asm/signal.h>
 
-struct new_utsname;
 struct pt_regs;
 struct rtas_args;
 struct sigaction;
@@ -35,12 +34,9 @@ asmlinkage long sys_pipe2(int __user *fildes, int flags);
 asmlinkage long sys_rt_sigaction(int sig,
 		const struct sigaction __user *act,
 		struct sigaction __user *oact, size_t sigsetsize);
-asmlinkage int sys_ipc(uint call, int first, unsigned long second,
-		long third, void __user *ptr, long fifth);
 asmlinkage long ppc64_personality(unsigned long personality);
 asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
 asmlinkage time_t sys64_time(time_t __user * tloc);
-asmlinkage long ppc_newuname(struct new_utsname __user * name);
 
 asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
 		size_t sigsetsize);
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 07d2d19..a5ee345 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -125,7 +125,7 @@ SYSCALL_SPU(fsync)
 SYS32ONLY(sigreturn)
 PPC_SYS(clone)
 COMPAT_SYS_SPU(setdomainname)
-PPC_SYS_SPU(newuname)
+SYSCALL_SPU(newuname)
 SYSCALL(ni_syscall)
 COMPAT_SYS_SPU(adjtimex)
 SYSCALL_SPU(mprotect)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index bb8e006..a6297c6 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -112,8 +112,13 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
 extern int set_dabr(unsigned long dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+extern void do_send_trap(struct pt_regs *regs, unsigned long address,
+			 unsigned long error_code, int signal_code, int brkpt);
+#else
 extern void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code);
+#endif
 extern void print_backtrace(unsigned long *);
 extern void show_regs(struct pt_regs * regs);
 extern void flush_instruction_cache(void);
@@ -232,12 +237,12 @@ __xchg_u32(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -275,12 +280,12 @@ __xchg_u64(volatile void *p, unsigned long val)
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -366,14 +371,14 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
 	unsigned int prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
@@ -412,13 +417,13 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
 	unsigned long prev;
 
 	__asm__ __volatile__ (
-	LWSYNC_ON_SMP
+	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
 	cmpd	0,%0,%3\n\
 	bne-	2f\n\
 	stdcx.	%4,0,%2\n\
 	bne-	1b"
-	ISYNC_ON_SMP
+	PPC_ACQUIRE_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index c8b3292..65eb859 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -104,14 +104,13 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_MEMDIE		9
+#define TIF_MEMDIE		9	/* is terminating due to OOM killer */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
 #define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
 #define TIF_FREEZE		14	/* Freezing for suspend */
 #define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
-#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -129,7 +128,6 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
 #define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index bbf8970..32adf72 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -8,6 +8,26 @@ struct device_node;
 
 #ifdef CONFIG_NUMA
 
+/*
+ * Before going off node we want the VM to try and reclaim from the local
+ * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
+ * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
+ * 20, we never reclaim and go off node straight away.
+ *
+ * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ */
+#define RECLAIM_DISTANCE 10
+
+/*
+ * Before going off node we want the VM to try and reclaim from the local
+ * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
+ * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
+ * 20, we never reclaim and go off node straight away.
+ *
+ * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ */
+#define RECLAIM_DISTANCE 10
+
 #include <asm/mmzone.h>
 
 static inline int cpu_to_node(int cpu)
@@ -19,7 +39,7 @@ static inline int cpu_to_node(int cpu)
 
 #define cpumask_of_node(node) ((node) == -1 ?				\
 			       cpu_all_mask :				\
-			       &numa_cpumask_lookup_table[node])
+			       node_to_cpumask_map[node])
 
 int of_node_to_nid(struct device_node *device);
 
@@ -38,27 +58,33 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 				 cpumask_of_node(pcibus_to_node(bus)))
 
 /* sched_domains SD_NODE_INIT for PPC64 machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.parent			= NULL,			\
-	.child			= NULL,			\
-	.groups			= NULL,			\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= 1,			\
-	.busy_idx		= 3,			\
-	.idle_idx		= 1,			\
-	.newidle_idx		= 0,			\
-	.wake_idx		= 0,			\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_BALANCE_NEWIDLE	\
-				| SD_SERIALIZE,		\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
-	.nr_balance_failed	= 0,			\
+#define SD_NODE_INIT (struct sched_domain) {				\
+	.min_interval		= 8,					\
+	.max_interval		= 32,					\
+	.busy_factor		= 32,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= 1,					\
+	.busy_idx		= 3,					\
+	.idle_idx		= 1,					\
+	.newidle_idx		= 0,					\
+	.wake_idx		= 0,					\
+	.forkexec_idx		= 0,					\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 1*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_BALANCE_WAKE			\
+				| 0*SD_WAKE_AFFINE			\
+				| 0*SD_PREFER_LOCAL			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
 }
 
 extern void __init dump_numa_cpu_topology(void);
@@ -96,8 +122,8 @@ static inline void sysfs_remove_device_from_node(struct sys_device *dev,
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
-#define topology_thread_cpumask(cpu)	(&per_cpu(cpu_sibling_map, cpu))
-#define topology_core_cpumask(cpu)	(&per_cpu(cpu_core_map, cpu))
+#define topology_thread_cpumask(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_cpumask(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))
 #endif
 #endif
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index f6ca761..f0a1026 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -364,6 +364,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -376,6 +377,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c002b04..58d0572 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -57,8 +57,12 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
-				   swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
+ifeq ($(CONFIG_FSL_BOOKE),y)
+obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
+else
+obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
+endif
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
@@ -98,11 +102,16 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
+
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
+obj-$(CONFIG_FSL_EMB_PERF_EVENT) += perf_event_fsl_emb.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+
 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
 
 ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index a6c2b63..496cc5b 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -50,6 +50,9 @@
 #endif
 #ifdef CONFIG_KVM
 #include <linux/kvm_host.h>
+#ifndef CONFIG_BOOKE
+#include <asm/kvm_book3s.h>
+#endif
 #endif
 
 #ifdef CONFIG_PPC32
@@ -105,6 +108,9 @@ int main(void)
 	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_PPC64 */
+#ifdef CONFIG_KVM_BOOK3S_32_HANDLER
+	DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu));
+#endif
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
@@ -133,7 +139,6 @@ int main(void)
 	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
-	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_event_pending));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
@@ -184,6 +189,7 @@ int main(void)
 #endif /* CONFIG_PPC_STD_MMU_64 */
 	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
 	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
 	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
@@ -191,9 +197,9 @@ int main(void)
 	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-	DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest));
-	DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb));
-	DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max));
+	DEFINE(PACA_KVM_SVCPU, offsetof(struct paca_struct, shadow_vcpu));
+	DEFINE(SVCPU_SLB, offsetof(struct kvmppc_book3s_shadow_vcpu, slb));
+	DEFINE(SVCPU_SLB_MAX, offsetof(struct kvmppc_book3s_shadow_vcpu, slb_max));
 #endif
 #endif /* CONFIG_PPC64 */
 
@@ -204,8 +210,8 @@ int main(void)
 	/* Interrupt register frame */
 	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
 	DEFINE(INT_FRAME_SIZE, STACK_INT_FRAME_SIZE);
-#ifdef CONFIG_PPC64
 	DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+#ifdef CONFIG_PPC64
 	/* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
 	DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
 	DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
@@ -388,11 +394,6 @@ int main(void)
 	DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack));
 	DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid));
 	DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr));
-	DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
-	DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr));
-	DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer));
-	DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr));
-	DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc));
 	DEFINE(VCPU_MSR, offsetof(struct kvm_vcpu, arch.msr));
 	DEFINE(VCPU_SPRG4, offsetof(struct kvm_vcpu, arch.sprg4));
 	DEFINE(VCPU_SPRG5, offsetof(struct kvm_vcpu, arch.sprg5));
@@ -400,27 +401,81 @@ int main(void)
 	DEFINE(VCPU_SPRG7, offsetof(struct kvm_vcpu, arch.sprg7));
 	DEFINE(VCPU_SHADOW_PID, offsetof(struct kvm_vcpu, arch.shadow_pid));
 
-	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
-	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
-	DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
-
-	/* book3s_64 */
-#ifdef CONFIG_PPC64
-	DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr));
+	/* book3s */
+#ifdef CONFIG_PPC_BOOK3S
 	DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
-	DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2));
 	DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
 	DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr));
 	DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
 	DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
 	DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
+	DEFINE(VCPU_RMCALL, offsetof(struct kvm_vcpu, arch.rmcall));
 	DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
+	DEFINE(VCPU_SVCPU, offsetof(struct kvmppc_vcpu_book3s, shadow_vcpu) -
+			   offsetof(struct kvmppc_vcpu_book3s, vcpu));
+	DEFINE(SVCPU_CR, offsetof(struct kvmppc_book3s_shadow_vcpu, cr));
+	DEFINE(SVCPU_XER, offsetof(struct kvmppc_book3s_shadow_vcpu, xer));
+	DEFINE(SVCPU_CTR, offsetof(struct kvmppc_book3s_shadow_vcpu, ctr));
+	DEFINE(SVCPU_LR, offsetof(struct kvmppc_book3s_shadow_vcpu, lr));
+	DEFINE(SVCPU_PC, offsetof(struct kvmppc_book3s_shadow_vcpu, pc));
+	DEFINE(SVCPU_R0, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[0]));
+	DEFINE(SVCPU_R1, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[1]));
+	DEFINE(SVCPU_R2, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[2]));
+	DEFINE(SVCPU_R3, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[3]));
+	DEFINE(SVCPU_R4, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[4]));
+	DEFINE(SVCPU_R5, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[5]));
+	DEFINE(SVCPU_R6, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[6]));
+	DEFINE(SVCPU_R7, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[7]));
+	DEFINE(SVCPU_R8, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[8]));
+	DEFINE(SVCPU_R9, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[9]));
+	DEFINE(SVCPU_R10, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[10]));
+	DEFINE(SVCPU_R11, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[11]));
+	DEFINE(SVCPU_R12, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[12]));
+	DEFINE(SVCPU_R13, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[13]));
+	DEFINE(SVCPU_HOST_R1, offsetof(struct kvmppc_book3s_shadow_vcpu, host_r1));
+	DEFINE(SVCPU_HOST_R2, offsetof(struct kvmppc_book3s_shadow_vcpu, host_r2));
+	DEFINE(SVCPU_VMHANDLER, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 vmhandler));
+	DEFINE(SVCPU_SCRATCH0, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					scratch0));
+	DEFINE(SVCPU_SCRATCH1, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					scratch1));
+	DEFINE(SVCPU_IN_GUEST, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					in_guest));
+	DEFINE(SVCPU_FAULT_DSISR, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					   fault_dsisr));
+	DEFINE(SVCPU_FAULT_DAR, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 fault_dar));
+	DEFINE(SVCPU_LAST_INST, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 last_inst));
+	DEFINE(SVCPU_SHADOW_SRR1, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					   shadow_srr1));
+#ifdef CONFIG_PPC_BOOK3S_32
+	DEFINE(SVCPU_SR, offsetof(struct kvmppc_book3s_shadow_vcpu, sr));
 #endif
+#else
+	DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr));
+	DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer));
+	DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
+	DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr));
+	DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc));
+	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
+	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
+	DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
+#endif /* CONFIG_PPC_BOOK3S */
 #endif
 #ifdef CONFIG_44x
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+	DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0));
+	DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1));
+	DEFINE(TLBCAM_MAS2, offsetof(struct tlbcam, MAS2));
+	DEFINE(TLBCAM_MAS3, offsetof(struct tlbcam, MAS3));
+	DEFINE(TLBCAM_MAS7, offsetof(struct tlbcam, MAS7));
+#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 26e5863..625942a 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index bb37b1d..a3c684b 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -19,6 +19,7 @@
 #include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/percpu.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 
 #include "cacheinfo.h"
@@ -642,7 +643,7 @@ static struct kobj_attribute *cache_index_opt_attrs[] = {
 	&cache_assoc_attr,
 };
 
-static struct sysfs_ops cache_index_ops = {
+static const struct sysfs_ops cache_index_ops = {
 	.show = cache_index_show,
 };
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2fc82ba..87aa0f3 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1701,6 +1701,35 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 476 core */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x11a50000,
+		.cpu_name		= "476",
+		.cpu_features		= CPU_FTRS_47X,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
+	{ /* 476 iss */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00050000,
+		.cpu_name		= "476",
+		.cpu_features		= CPU_FTRS_47X,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1808,10 +1837,10 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
-		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
-		.machine_check		= machine_check_e500,
+		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
 	},
 	{	/* default match */
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 6f4613d..417f7b0 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -162,6 +162,34 @@ static void crash_kexec_prepare_cpus(int cpu)
 	/* Leave the IPI callback set */
 }
 
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#ifdef CONFIG_PPC_STD_MMU_64
+static void crash_kexec_wait_realmode(int cpu)
+{
+	unsigned int msecs;
+	int i;
+
+	msecs = 10000;
+	for (i=0; i < NR_CPUS && msecs > 0; i++) {
+		if (i == cpu)
+			continue;
+
+		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			if (!cpu_possible(i)) {
+				break;
+			}
+			if (!cpu_online(i)) {
+				break;
+			}
+			msecs--;
+			mdelay(1);
+		}
+	}
+	mb();
+}
+#endif
+
 /*
  * This function will be called by secondary cpus or by kexec cpu
  * if soft-reset is activated to stop some CPUs.
@@ -347,10 +375,12 @@ int crash_shutdown_unregister(crash_shutdown_t handler)
 EXPORT_SYMBOL(crash_shutdown_unregister);
 
 static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+static int crash_shutdown_cpu = -1;
 
 static int handle_fault(struct pt_regs *regs)
 {
-	longjmp(crash_shutdown_buf, 1);
+	if (crash_shutdown_cpu == smp_processor_id())
+		longjmp(crash_shutdown_buf, 1);
 	return 0;
 }
 
@@ -375,11 +405,14 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	for_each_irq(i) {
 		struct irq_desc *desc = irq_to_desc(i);
 
+		if (!desc || !desc->chip || !desc->chip->eoi)
+			continue;
+
 		if (desc->status & IRQ_INPROGRESS)
 			desc->chip->eoi(i);
 
 		if (!(desc->status & IRQ_DISABLED))
-			desc->chip->disable(i);
+			desc->chip->shutdown(i);
 	}
 
 	/*
@@ -388,6 +421,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	 */
 	old_handler = __debugger_fault_handler;
 	__debugger_fault_handler = handle_fault;
+	crash_shutdown_cpu = smp_processor_id();
 	for (i = 0; crash_shutdown_handles[i]; i++) {
 		if (setjmp(crash_shutdown_buf) == 0) {
 			/*
@@ -401,6 +435,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 			asm volatile("sync; isync");
 		}
 	}
+	crash_shutdown_cpu = -1;
 	__debugger_fault_handler = old_handler;
 
 	/*
@@ -412,6 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
 	crash_kexec_stop_spus();
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
+	crash_kexec_wait_realmode(crashing_cpu);
+#endif
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 0);
 }
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 5fb667a..40f5246 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,7 +13,7 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -33,7 +33,7 @@ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 #ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
 }
 
 static void __init create_trampoline(unsigned long addr)
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 59c9285..02f724f 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -1,7 +1,8 @@
 /*
  * Contains routines needed to support swiotlb for ppc.
  *
- * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
+ * Author: Becky Bruce
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -38,8 +39,8 @@ struct dma_map_ops swiotlb_dma_ops = {
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
@@ -70,7 +71,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if (dma_get_mask(dev) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6215062..84d6367 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -8,7 +8,8 @@
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
-#include <linux/lmb.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -88,7 +89,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask)
 	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= (lmb_end_of_DRAM() - 1);
+	return mask >= (memblock_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
@@ -126,11 +127,11 @@ static inline void dma_direct_sync_sg(struct device *dev,
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 }
 
-static inline void dma_direct_sync_single_range(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
+static inline void dma_direct_sync_single(struct device *dev,
+					  dma_addr_t dma_handle, size_t size,
+					  enum dma_data_direction direction)
 {
-	__dma_sync(bus_to_virt(dma_handle+offset), size, direction);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
 }
 #endif
 
@@ -143,8 +144,8 @@ struct dma_map_ops dma_direct_ops = {
 	.map_page	= dma_direct_map_page,
 	.unmap_page	= dma_direct_unmap_page,
 #ifdef CONFIG_NOT_COHERENT_CACHE
-	.sync_single_range_for_cpu 	= dma_direct_sync_single_range,
-	.sync_single_range_for_device 	= dma_direct_sync_single_range,
+	.sync_single_for_cpu 		= dma_direct_sync_single,
+	.sync_single_for_device 	= dma_direct_sync_single,
 	.sync_sg_for_cpu 		= dma_direct_sync_sg,
 	.sync_sg_for_device 		= dma_direct_sync_sg,
 #endif
diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/kernel/e500-pmu.c
new file mode 100644
index 0000000..7c07de0
--- /dev/null
+++ b/arch/powerpc/kernel/e500-pmu.c
@@ -0,0 +1,129 @@
+/*
+ * Performance counter support for e500 family processors.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	/*
+	 * D-cache misses are not split into read/write/prefetch;
+	 * use raw event 41.
+	 */
+	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	27,		0	},
+		[C(OP_WRITE)] = {	28,		0	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	2,		60	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It allocates only on L1 castout or explicit prefetch, and
+	 * does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	12,		15 	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 128;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	u64 ret;
+
+	if (event_low >= num_events)
+		return 0;
+
+	ret = FSL_EMB_EVENT_VALID;
+
+	if (event_low >= 76 && event_low <= 81) {
+		ret |= FSL_EMB_EVENT_RESTRICTED;
+		ret |= event_id &
+		       (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH);
+	} else if (event_id &
+	           (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) {
+		/* Threshold requested on non-threshold event */
+		return 0;
+	}
+
+	return ret;
+}
+
+static struct fsl_emb_pmu e500_pmu = {
+	.name			= "e500 family",
+	.n_counter		= 4,
+	.n_restricted		= 2,
+	.xlate_event		= e500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e500_generic_events),
+	.generic_events		= e500_generic_events,
+	.cache_events		= &e500_cache_events,
+};
+
+static int init_e500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type)
+		return -ENODEV;
+
+	if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc"))
+		num_events = 256;
+	else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e500_pmu);
+}
+
+arch_initcall(init_e500_pmu);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 1175a85..ed4aeb9 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -373,11 +373,13 @@ syscall_exit_cont:
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
+BEGIN_MMU_FTR_SECTION
 	lis	r4,icache_44x_need_flush@ha
 	lwz	r5,icache_44x_need_flush@l(r4)
 	cmplwi	cr0,r5,0
 	bne-	2f
 1:
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
 #endif /* CONFIG_44x */
 BEGIN_FTR_SECTION
 	lwarx	r7,0,r1
@@ -848,6 +850,9 @@ resume_kernel:
 	/* interrupts are hard-disabled at this point */
 restore:
 #ifdef CONFIG_44x
+BEGIN_MMU_FTR_SECTION
+	b	1f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	lis	r4,icache_44x_need_flush@ha
 	lwz	r5,icache_44x_need_flush@l(r4)
 	cmplwi	cr0,r5,0
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index bdcb557..42e9d90 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -556,15 +556,6 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
-#ifdef CONFIG_PERF_EVENTS
-	/* check paca->perf_event_pending if we're enabling ints */
-	lbz	r3,PACAPERFPEND(r13)
-	and.	r3,r3,r5
-	beq	27f
-	bl	.perf_event_do_pending
-27:
-#endif /* CONFIG_PERF_EVENTS */
-
 	/* extract EE bit and use it to restore paca->hard_enabled */
 	ld	r3,_MSR(r1)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */
@@ -791,9 +782,8 @@ _GLOBAL(enter_rtas)
 	
         li      r9,1
         rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
-	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP
+	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI
 	andc	r6,r0,r9
-	ori	r6,r6,MSR_RI
 	sync				/* disable interrupts so SRR0/1 */
 	mtmsrd	r0			/* don't get trashed */
 
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e3be98f..3e423fb 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -735,8 +735,11 @@ _STATIC(do_hash_page)
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 
-	andis.	r0,r4,0xa450		/* weird error? */
+	andis.	r0,r4,0xa410		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
+	andis.  r0,r4,DSISR_DABRMATCH@h
+	bne-    handle_dabr_fault
+
 BEGIN_FTR_SECTION
 	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
 	bne-	do_ste_alloc		/* If so handle it */
@@ -823,6 +826,14 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 	bl	.raw_local_irq_restore
 	b	11f
 
+/* We have a data breakpoint exception - handle it */
+handle_dabr_fault:
+	ld      r4,_DAR(r1)
+	ld      r5,_DSISR(r1)
+	addi    r3,r1,STACK_FRAME_OVERHEAD
+	bl      .do_dabr
+	b       .ret_from_except_lite
+
 /* Here we have a page fault that hash_page can't handle. */
 handle_page_fault:
 	ENABLE_INTS
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index 1679a70..6b1f427 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -17,5 +17,5 @@
 
 #include <asm/firmware.h>
 
-unsigned long powerpc_firmware_features;
+unsigned long powerpc_firmware_features __read_mostly;
 EXPORT_SYMBOL_GPL(powerpc_firmware_features);
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
new file mode 100644
index 0000000..a92c79b
--- /dev/null
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -0,0 +1,235 @@
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	match_TLB			/* skip if NPIDS != 3 */
+
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li	r6,0x04
+	tlbivax 0,r6
+	TLBSYNC
+	/* Invalidate TLB1 */
+	li	r6,0x0c
+	tlbivax 0,r6
+	TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,31
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,(2f - 1b)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+2:
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID0,r6
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	2f				/* skip if NPIDS != 3 */
+
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+#if defined(ENTRY_MAPPING_BOOT_SETUP)
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r6
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	mtspr	SPRN_MAS2,r6
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r6,(KERNELBASE & ~0xfff)@h
+	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+
+#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
+/*
+ * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
+ * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
+ * will cover the first 2GiB of memory.
+ */
+
+	lis r10, (MAS1_VALID|MAS1_IPROT)@h
+	ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
+	li  r11, 0
+	li  r0, 8
+	mtctr   r0
+
+next_tlb_setup:
+	addi	r0, r11, 3
+	rlwinm  r0, r0, 16, 4, 15  // Compute esel
+	rlwinm  r9, r11, 28, 0, 3   // Compute [ER]PN
+	oris    r0, r0, (MAS0_TLBSEL(1))@h
+	mtspr   SPRN_MAS0,r0
+	mtspr   SPRN_MAS1,r10
+	mtspr   SPRN_MAS2,r9
+	ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr   SPRN_MAS3,r9
+	tlbwe
+	addi    r11, r11, 1
+	bdnz+   next_tlb_setup
+
+/* 7. Jump to our 1:1 mapping */
+	mr	r6, r25
+#else
+	#error You need to specify the mapping or not use this at all.
+#endif
+
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,(2f - 1b)
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r8,SPRN_MAS1
+	rlwinm	r8,r8,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index e025e89..98c4b29 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -33,6 +33,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
 #include <asm/bug.h>
+#include <asm/kvm_book3s_asm.h>
 
 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
 #define LOAD_BAT(n, reg, RA, RB)	\
@@ -303,6 +304,7 @@ __secondary_hold_acknowledge:
  */
 #define EXCEPTION(n, label, hdlr, xfer)		\
 	. = n;					\
+	DO_KVM n;				\
 label:						\
 	EXCEPTION_PROLOG;			\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
@@ -358,6 +360,7 @@ i##n:								\
  *	-- paulus.
  */
 	. = 0x200
+	DO_KVM  0x200
 	mtspr	SPRN_SPRG_SCRATCH0,r10
 	mtspr	SPRN_SPRG_SCRATCH1,r11
 	mfcr	r10
@@ -381,6 +384,7 @@ i##n:								\
 
 /* Data access exception. */
 	. = 0x300
+	DO_KVM  0x300
 DataAccess:
 	EXCEPTION_PROLOG
 	mfspr	r10,SPRN_DSISR
@@ -397,6 +401,7 @@ DataAccess:
 
 /* Instruction access exception. */
 	. = 0x400
+	DO_KVM  0x400
 InstructionAccess:
 	EXCEPTION_PROLOG
 	andis.	r0,r9,0x4000		/* no pte found? */
@@ -413,6 +418,7 @@ InstructionAccess:
 
 /* Alignment exception */
 	. = 0x600
+	DO_KVM  0x600
 Alignment:
 	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_DAR
@@ -427,6 +433,7 @@ Alignment:
 
 /* Floating-point unavailable */
 	. = 0x800
+	DO_KVM  0x800
 FPUnavailable:
 BEGIN_FTR_SECTION
 /*
@@ -450,6 +457,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 
 /* System call */
 	. = 0xc00
+	DO_KVM  0xc00
 SystemCall:
 	EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
@@ -467,9 +475,11 @@ SystemCall:
  * by executing an altivec instruction.
  */
 	. = 0xf00
+	DO_KVM  0xf00
 	b	PerformanceMonitor
 
 	. = 0xf20
+	DO_KVM  0xf20
 	b	AltiVecUnavailable
 
 /*
@@ -882,6 +892,10 @@ __secondary_start:
 	RFI
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+#include "../kvm/book3s_rmhandlers.S"
+#endif
+
 /*
  * Those generic dummy functions are kept for CPUs not
  * included in CONFIG_6xx
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 711368b..5ab484e 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -37,6 +37,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/synch.h>
 #include "head_booke.h"
 
 
@@ -69,165 +70,7 @@ _ENTRY(_start);
 	mr	r27,r7
 	li	r24,0		/* CPU number */
 
-/*
- * In case the firmware didn't do it, we apply some workarounds
- * that are good for all 440 core variants here
- */
-	mfspr	r3,SPRN_CCR0
-	rlwinm	r3,r3,0,0,27	/* disable icache prefetch */
-	isync
-	mtspr	SPRN_CCR0,r3
-	isync
-	sync
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from.  We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- *	 determine which physical region we are located
- *	 in.  This can be used to determine where in RAM
- *	 (on a shared CPU system) or PCI memory space
- *	 (on a DRAMless system) we are located.
- *       For now, we assume a perfect world which means
- *	 we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
-	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
-	mfspr	r3,SPRN_PID			/* Get PID */
-	mfmsr	r4				/* Get MSR */
-	andi.	r4,r4,MSR_IS@l			/* TS=1? */
-	beq	wmmucr				/* If not, leave STS=0 */
-	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
-	sync
-
-	bl	invstr				/* Find our address */
-invstr:	mflr	r5				/* Make it accessible */
-	tlbsx	r23,0,r5			/* Find entry we are in */
-	li	r4,0				/* Start at TLB entry 0 */
-	li	r3,0				/* Set PAGEID inval value */
-1:	cmpw	r23,r4				/* Is this our entry? */
-	beq	skpinv				/* If so, skip the inval */
-	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
-skpinv:	addi	r4,r4,1				/* Increment */
-	cmpwi	r4,64				/* Are we done? */
-	bne	1b				/* If not, repeat */
-	isync					/* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
-	lis	r3,PAGE_OFFSET@h
-	ori	r3,r3,PAGE_OFFSET@l
-
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
-	/* Load the kernel PID = 0 */
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Initialize MMUCR */
-	li	r5,0
-	mtspr	SPRN_MMUCR,r5
-	sync
-
- 	/* pageid fields */
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
-	/* xlat fields */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
-
-	/* attrib fields */
-	/* Added guarded bit to protect against speculative loads/stores */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	mfmsr	r0
-	mtspr	SPRN_SRR1, r0
-	lis	r0,3f@h
-	ori	r0,r0,3f@l
-	mtspr	SPRN_SRR0,r0
-	sync
-	rfi
-
-	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,63
-	beq	4f
-	li	r6,0
-	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	isync
-
-4:
-#ifdef CONFIG_PPC_EARLY_DEBUG_44x
-	/* Add UART mapping for early debug. */
-
- 	/* pageid fields */
-	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
-	ori	r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
-
-	/* xlat fields */
-	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
-	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
-
-	/* attrib fields */
-	li	r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
-        li      r0,62                    /* TLB slot 0 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID
-	tlbwe	r4,r0,PPC44x_TLB_XLAT
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB
-
-	/* Force context change */
-	isync
-#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, DebugCrit);
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
+	bl	init_cpu_state
 
 	/*
 	 * This is where the main kernel code starts.
@@ -349,7 +192,7 @@ interrupt_base:
 #endif
 
 	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
+	START_EXCEPTION(DataTLBError44x)
 	mtspr	SPRN_SPRG_WSCRATCH0, r10		/* Save some working registers */
 	mtspr	SPRN_SPRG_WSCRATCH1, r11
 	mtspr	SPRN_SPRG_WSCRATCH2, r12
@@ -440,7 +283,7 @@ tlb_44x_patch_hwater_D:
 	mfspr	r10,SPRN_DEAR
 
 	 /* Jump to common tlb load */
-	b	finish_tlb_load
+	b	finish_tlb_load_44x
 
 2:
 	/* The bailout.  Restore registers to pre-exception conditions
@@ -460,7 +303,7 @@ tlb_44x_patch_hwater_D:
 	 * information from different registers and bailout
 	 * to a different point.
 	 */
-	START_EXCEPTION(InstructionTLBError)
+	START_EXCEPTION(InstructionTLBError44x)
 	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
 	mtspr	SPRN_SPRG_WSCRATCH1, r11
 	mtspr	SPRN_SPRG_WSCRATCH2, r12
@@ -536,7 +379,7 @@ tlb_44x_patch_hwater_I:
 	mfspr	r10,SPRN_SRR0
 
 	/* Jump to common TLB load point */
-	b	finish_tlb_load
+	b	finish_tlb_load_44x
 
 2:
 	/* The bailout.  Restore registers to pre-exception conditions
@@ -550,15 +393,7 @@ tlb_44x_patch_hwater_I:
 	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
-	/* Debug Interrupt */
-	DEBUG_CRIT_EXCEPTION
-
-/*
- * Local functions
-  */
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  * 	r10 - EA of fault
@@ -568,7 +403,7 @@ tlb_44x_patch_hwater_I:
  *	MMUCR - loaded with proper value when we get here
  *	Upon exit, we reload everything and RFI.
  */
-finish_tlb_load:
+finish_tlb_load_44x:
 	/* Combine RPN & ERPN an write WS 0 */
 	rlwimi	r11,r12,0,0,31-PAGE_SHIFT
 	tlbwe	r11,r13,PPC44x_TLB_XLAT
@@ -601,6 +436,227 @@ finish_tlb_load:
 	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
+/* TLB error interrupts for 476
+ */
+#ifdef CONFIG_PPC_47x
+	START_EXCEPTION(DataTLBError47x)
+	mtspr	SPRN_SPRG_WSCRATCH0,r10	/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1,r11
+	mtspr	SPRN_SPRG_WSCRATCH2,r12
+	mtspr	SPRN_SPRG_WSCRATCH3,r13
+	mfcr	r11
+	mtspr	SPRN_SPRG_WSCRATCH4,r11
+	mfspr	r10,SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11,PAGE_OFFSET@h
+	cmplw	cr0,r10,r11
+	blt+	3f
+	lis	r11,swapper_pg_dir@h
+	ori	r11,r11, swapper_pg_dir@l
+	li	r12,0			/* MMUCR = 0 */
+	b	4f
+
+	/* Get the PGD for the current thread and setup MMUCR */
+3:	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+	mfspr   r12,SPRN_PID		/* Get PID */
+4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
+
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,10,30,30
+
+	/* Load the PTE */
+	/* Compute pgdir/pmd offset */
+	rlwinm  r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+	lwzx	r11,r12,r11		/* Get pgd/pmd entry */
+
+	/* Word 0 is EPN,V,TS,DSIZ */
+	li	r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+	rlwimi	r10,r12,0,32-PAGE_SHIFT,31	/* Insert valid and page size*/
+	li	r12,0
+	tlbwe	r10,r12,0
+
+	/* XXX can we do better ? Need to make sure tlbwe has established
+	 * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+	isync
+#endif
+
+	rlwinm.	r12,r11,0,0,20		/* Extract pt base address */
+	/* Compute pte address */
+	rlwimi  r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+	beq	2f			/* Bail if no table */
+	lwz	r11,0(r12)		/* Get high word of pte entry */
+
+	/* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+	 * bottom of r12 to create a data dependency... We can also use r10
+	 * as destination nowadays
+	 */
+#ifdef CONFIG_SMP
+	lwsync
+#endif
+	lwz	r12,4(r12)		/* Get low word of pte entry */
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	 /* Jump to common tlb load */
+	beq	finish_tlb_load_47x
+
+2:	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11,SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13,SPRN_SPRG_RSCRATCH3
+	mfspr	r12,SPRN_SPRG_RSCRATCH2
+	mfspr	r11,SPRN_SPRG_RSCRATCH1
+	mfspr	r10,SPRN_SPRG_RSCRATCH0
+	b	DataStorage
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError47x)
+	mtspr	SPRN_SPRG_WSCRATCH0,r10	/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1,r11
+	mtspr	SPRN_SPRG_WSCRATCH2,r12
+	mtspr	SPRN_SPRG_WSCRATCH3,r13
+	mfcr	r11
+	mtspr	SPRN_SPRG_WSCRATCH4,r11
+	mfspr	r10,SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11,PAGE_OFFSET@h
+	cmplw	cr0,r10,r11
+	blt+	3f
+	lis	r11,swapper_pg_dir@h
+	ori	r11,r11, swapper_pg_dir@l
+	li	r12,0			/* MMUCR = 0 */
+	b	4f
+
+	/* Get the PGD for the current thread and setup MMUCR */
+3:	mfspr	r11,SPRN_SPRG_THREAD
+	lwz	r11,PGDIR(r11)
+	mfspr   r12,SPRN_PID		/* Get PID */
+4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
+
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+
+	/* Load PTE */
+	/* Compute pgdir/pmd offset */
+	rlwinm  r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+	lwzx	r11,r12,r11		/* Get pgd/pmd entry */
+
+	/* Word 0 is EPN,V,TS,DSIZ */
+	li	r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+	rlwimi	r10,r12,0,32-PAGE_SHIFT,31	/* Insert valid and page size*/
+	li	r12,0
+	tlbwe	r10,r12,0
+
+	/* XXX can we do better ? Need to make sure tlbwe has established
+	 * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+	isync
+#endif
+
+	rlwinm.	r12,r11,0,0,20		/* Extract pt base address */
+	/* Compute pte address */
+	rlwimi  r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+	beq	2f			/* Bail if no table */
+
+	lwz	r11,0(r12)		/* Get high word of pte entry */
+	/* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+	 * bottom of r12 to create a data dependency... We can also use r10
+	 * as destination nowadays
+	 */
+#ifdef CONFIG_SMP
+	lwsync
+#endif
+	lwz	r12,4(r12)		/* Get low word of pte entry */
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Jump to common TLB load point */
+	beq	finish_tlb_load_47x
+
+2:	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
+	b	InstructionStorage
+
+/*
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - free to use
+ * 	r11 - PTE high word value
+ *	r12 - PTE low word value
+ *      r13 - free to use
+ *	MMUCR - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load_47x:
+	/* Combine RPN & ERPN an write WS 1 */
+	rlwimi	r11,r12,0,0,31-PAGE_SHIFT
+	tlbwe	r11,r13,1
+
+	/* And make up word 2 */
+	li	r10,0xf85			/* Mask to apply from PTE */
+	rlwimi	r10,r12,29,30,30		/* DIRTY -> SW position */
+	and	r11,r12,r10			/* Mask PTE bits to keep */
+	andi.	r10,r12,_PAGE_USER		/* User page ? */
+	beq	1f				/* nope, leave U bits empty */
+	rlwimi	r11,r11,3,26,28			/* yes, copy S bits to U */
+1:	tlbwe	r11,r13,2
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
+	rfi
+
+#endif /* CONFIG_PPC_47x */
+
+	/* Debug Interrupt */
+	/*
+	 * This statement needs to exist at the end of the IVPR
+	 * definition just in case you end up taking a debug
+	 * exception within another exception.
+	 */
+	DEBUG_CRIT_EXCEPTION
+
 /*
  * Global functions
  */
@@ -647,6 +703,428 @@ _GLOBAL(set_context)
 	blr
 
 /*
+ * Init CPU state. This is called at boot time or for secondary CPUs
+ * to setup initial TLB entries, setup IVORs, etc...
+ *
+ */
+_GLOBAL(init_cpu_state)
+	mflr	r22
+#ifdef CONFIG_PPC_47x
+	/* We use the PVR to differenciate 44x cores from 476 */
+	mfspr	r3,SPRN_PVR
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476@h
+	beq	head_start_47x
+	cmplwi	cr0,r3,PVR_476_ISS@h
+	beq	head_start_47x
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * In case the firmware didn't do it, we apply some workarounds
+ * that are good for all 440 core variants here
+ */
+	mfspr	r3,SPRN_CCR0
+	rlwinm	r3,r3,0,0,27	/* disable icache prefetch */
+	isync
+	mtspr	SPRN_CCR0,r3
+	isync
+	sync
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from.  We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ *	 determine which physical region we are located
+ *	 in.  This can be used to determine where in RAM
+ *	 (on a shared CPU system) or PCI memory space
+ *	 (on a DRAMless system) we are located.
+ *       For now, we assume a perfect world which means
+ *	 we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	wmmucr				/* If not, leave STS=0 */
+	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
+wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	bl	invstr				/* Find our address */
+invstr:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skpinv				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skpinv:	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done? */
+	bne	1b				/* If not, repeat */
+	isync					/* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+	lis	r3,PAGE_OFFSET@h
+	ori	r3,r3,PAGE_OFFSET@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+	/* pageid fields */
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+	/* xlat fields */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+
+	/* attrib fields */
+	/* Added guarded bit to protect against speculative loads/stores */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* If necessary, invalidate original entry we used */
+3:	cmpwi	r23,63
+	beq	4f
+	li	r6,0
+	tlbwe   r6,r23,PPC44x_TLB_PAGEID
+	isync
+
+4:
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+	/* Add UART mapping for early debug. */
+
+	/* pageid fields */
+	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+	ori	r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
+
+	/* xlat fields */
+	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+	/* attrib fields */
+	li	r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
+        li      r0,62                    /* TLB slot 0 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID
+	tlbwe	r4,r0,PPC44x_TLB_XLAT
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError44x);
+	SET_IVOR(14, InstructionTLBError44x);
+	SET_IVOR(15, DebugCrit);
+
+	b	head_start_common
+
+
+#ifdef CONFIG_PPC_47x
+
+#ifdef CONFIG_SMP
+
+/* Entry point for secondary 47x processors */
+_GLOBAL(start_secondary_47x)
+        mr      r24,r3          /* CPU number */
+
+	bl	init_cpu_state
+
+	/* Now we need to bolt the rest of kernel memory which
+	 * is done in C code. We must be careful because our task
+	 * struct or our stack can (and will probably) be out
+	 * of reach of the initial 256M TLB entry, so we use a
+	 * small temporary stack in .bss for that. This works
+	 * because only one CPU at a time can be in this code
+	 */
+	lis	r1,temp_boot_stack@h
+	ori	r1,r1,temp_boot_stack@l
+	addi	r1,r1,1024-STACK_FRAME_OVERHEAD
+	li	r0,0
+	stw	r0,0(r1)
+	bl	mmu_init_secondary
+
+	/* Now we can get our task struct and real stack pointer */
+
+	/* Get current_thread_info and current */
+	lis	r1,secondary_ti@ha
+	lwz	r1,secondary_ti@l(r1)
+	lwz	r2,TI_TASK(r1)
+
+	/* Current stack pointer */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r0,0
+	stw	r0,0(r1)
+
+	/* Kernel stack for exception entry in SPRG3 */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	b	start_secondary
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ */
+
+head_start_47x:
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	1f				/* If not, leave STS=0 */
+	oris	r3,r3,PPC47x_MMUCR_STS@h	/* Set STS=1 */
+1:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	/* Find the entry we are running from */
+	bl	1f
+1:	mflr	r23
+	tlbsx	r23,0,r23
+	tlbre	r24,r23,0
+	tlbre	r25,r23,1
+	tlbre	r26,r23,2
+
+/*
+ * Cleanup time
+ */
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+clear_all_utlb_entries:
+
+	#; Set initial values.
+
+	addis		r3,0,0x8000
+	addi		r4,0,0
+	addi		r5,0,0
+	b		clear_utlb_entry
+
+	#; Align the loop to speed things up.
+
+	.align		6
+
+clear_utlb_entry:
+
+	tlbwe		r4,r3,0
+	tlbwe		r5,r3,1
+	tlbwe		r5,r3,2
+	addis		r3,r3,0x2000
+	cmpwi		r3,0
+	bne		clear_utlb_entry
+	addis		r3,0,0x8000
+	addis		r4,r4,0x100
+	cmpwi		r4,0
+	bne		clear_utlb_entry
+
+	#; Restore original entry.
+
+	oris	r23,r23,0x8000  /* specify the way */
+	tlbwe		r24,r23,0
+	tlbwe		r25,r23,1
+	tlbwe		r26,r23,2
+
+/*
+ * Configure and load pinned entry into TLB for the kernel core
+ */
+
+	lis	r3,PAGE_OFFSET@h
+	ori	r3,r3,PAGE_OFFSET@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Word 0 */
+	clrrwi	r3,r3,12		/* Mask off the effective page number */
+	ori	r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
+
+	/* Word 1 */
+	clrrwi	r4,r4,12		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+	/* Word 2 */
+	li	r5,0
+	ori	r5,r5,PPC47x_TLB2_S_RWX
+#ifdef CONFIG_SMP
+	ori	r5,r5,PPC47x_TLB2_M
+#endif
+
+	/* We write to way 0 and bolted 0 */
+	lis	r0,0x8800
+	tlbwe	r3,r0,0
+	tlbwe	r4,r0,1
+	tlbwe	r5,r0,2
+
+/*
+ * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix
+ * them up later
+ */
+	LOAD_REG_IMMEDIATE(r3, 0x9abcdef0)
+	mtspr	SPRN_SSPCR,r3
+	mtspr	SPRN_USPCR,r3
+	LOAD_REG_IMMEDIATE(r3, 0x12345670)
+	mtspr	SPRN_ISPCR,r3
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* Invalidate original entry we used */
+3:
+	rlwinm	r24,r24,0,21,19 /* clear the "valid" bit */
+	tlbwe	r24,r23,0
+	addi	r24,0,0
+	tlbwe	r24,r23,1
+	tlbwe	r24,r23,2
+	isync                   /* Clear out the shadow TLB entries */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+	/* Add UART mapping for early debug. */
+
+	/* Word 0 */
+	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+	ori	r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M
+
+	/* Word 1 */
+	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+	/* Word 2 */
+	li	r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG)
+
+	/* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same
+	 * congruence class as the kernel, we need to make sure of it at
+	 * some point
+	 */
+        lis	r0,0x8d00
+	tlbwe	r3,r0,0
+	tlbwe	r4,r0,1
+	tlbwe	r5,r0,2
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheckA);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError47x);
+	SET_IVOR(14, InstructionTLBError47x);
+	SET_IVOR(15, DebugCrit);
+
+	/* We configure icbi to invalidate 128 bytes at a time since the
+	 * current 32-bit kernel code isn't too happy with icache != dcache
+	 * block size
+	 */
+	mfspr	r3,SPRN_CCR0
+	oris	r3,r3,0x0020
+	mtspr	SPRN_CCR0,r3
+	isync
+
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * Here we are back to code that is common between 44x and 47x
+ *
+ * We proceed to further kernel initialization and return to the
+ * main kernel entry
+ */
+head_start_common:
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+	addis	r22,r22,KERNELBASE@h
+	mtlr	r22
+	isync
+	blr
+
+/*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.
  */
@@ -671,3 +1149,9 @@ swapper_pg_dir:
  */
 abatron_pteptrs:
 	.space	8
+
+#ifdef CONFIG_SMP
+	.align	12
+temp_boot_stack:
+	.space	1024
+#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 9258074..844a44b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -37,7 +37,7 @@
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/irqflags.h>
-#include <asm/kvm_book3s_64_asm.h>
+#include <asm/kvm_book3s_asm.h>
 
 /* The physical memory is layed out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -169,7 +169,7 @@ exception_marker:
 /* KVM trampoline code needs to be close to the interrupt handlers */
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#include "../kvm/book3s_64_rmhandlers.S"
+#include "../kvm/book3s_rmhandlers.S"
 #endif
 
 _GLOBAL(generic_secondary_thread_init)
@@ -219,7 +219,8 @@ generic_secondary_common_init:
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
 	 */
-	LOAD_REG_ADDR(r13, paca)	/* Get base vaddr of paca array	 */
+	LOAD_REG_ADDR(r13, paca)	/* Load paca pointer		 */
+	ld	r13,0(r13)		/* Get base vaddr of paca array	 */
 	li	r5,0			/* logical cpu id                */
 1:	lhz	r6,PACAHWCPUID(r13)	/* Load HW procid from paca      */
 	cmpw	r6,r24			/* Compare to our id             */
@@ -536,7 +537,8 @@ _GLOBAL(pmac_secondary_start)
 	mtmsrd	r3			/* RI on */
 
 	/* Set up a paca value for this processor. */
-	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
+	LOAD_REG_ADDR(r4,paca)		/* Load paca pointer		*/
+	ld	r4,0(r4)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
 	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
@@ -615,6 +617,17 @@ _GLOBAL(start_secondary_prolog)
 	std	r3,0(r1)		/* Zero the stack frame pointer	*/
 	bl	.start_secondary
 	b	.
+/*
+ * Reset stack pointer and call start_secondary
+ * to continue with online operation when woken up
+ * from cede in cpu offline.
+ */
+_GLOBAL(start_secondary_resume)
+	ld	r1,PACAKSAVE(r13)	/* Reload kernel stack pointer */
+	li	r3,0
+	std	r3,0(r1)		/* Zero the stack frame pointer	*/
+	bl	.start_secondary
+	b	.
 #endif
 
 /*
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3ef743f..1f1a04b 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -71,9 +71,6 @@ _ENTRY(_start);
  * in the first level table, but that would require many changes to the
  * Linux page directory/table functions that I don't want to do right now.
  *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
  *	-- Dan
  */
 	.globl	__start
@@ -302,8 +299,13 @@ InstructionTLBMiss:
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
 #ifdef CONFIG_8xx_CPU15
 	addi	r11, r10, 0x1000
@@ -318,12 +320,16 @@ InstructionTLBMiss:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
+#ifdef CONFIG_MODULES
+	/* Only modules will cause ITLB Misses as we always
+	 * pin the first 8MB of kernel memory */
 	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
 	beq	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 	rlwimi	r10, r11, 0, 2, 19
 3:
+#endif
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
@@ -339,31 +345,35 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
 	andi.	r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
 	cmpwi	cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
 	bne-	cr0, 2f
-
-	/* Clear PP lsb, 0x400 */
-	rlwinm 	r10, r10, 0, 22, 20
-
+#endif
 	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 22 and 28 must be clear.
+	 * Software indicator bits 21 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
 	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	rlwimi	r10, r11, 0, 0x07f8	/* Set 24-27, clear 21-23,28 */
 	DO_8xx_CPU6(0x2d80, r3)
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 2:
 	mfspr	r11, SPRN_SRR1
@@ -373,13 +383,20 @@ InstructionTLBMiss:
 	rlwinm	r11, r11, 0, 0xffff
 	mtspr	SPRN_SRR1, r11
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	li	r11, 0x00f0
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	b	InstructionAccess
 
 	. = 0x1200
@@ -390,8 +407,13 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -438,15 +460,14 @@ DataStoreTLBMiss:
 	 * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
 	 * r10 = (r10 & ~PRESENT) | r11;
 	 */
+#ifdef CONFIG_SWAP
 	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
 	and	r11, r11, r10
 	rlwimi	r10, r11, 0, _PAGE_PRESENT
-
+#endif
 	/* Honour kernel RO, User NA */
 	/* 0x200 == Extended encoding, bit 22 */
-	/* r11 =  (r10 & _PAGE_USER) >> 2 */
-	rlwinm	r11, r10, 32-2, 0x200
-	or	r10, r11, r10
+	rlwimi	r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */
 	/* r11 =  (r10 & _PAGE_RW) >> 1 */
 	rlwinm	r11, r10, 32-1, 0x200
 	or	r10, r11, r10
@@ -460,18 +481,24 @@ DataStoreTLBMiss:
 	 * of the MMU.
 	 */
 2:	li	r11, 0x00f0
-	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 
 /* This is an instruction TLB error on the MPC8xx.  This could be due
@@ -683,9 +710,6 @@ start_here:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
 	mtspr	SPRN_SPRG_THREAD,r4
-	li	r3,0
-	/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 50504ae..a0bf158 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -1,6 +1,7 @@
 #ifndef __HEAD_BOOKE_H__
 #define __HEAD_BOOKE_H__
 
+#include <asm/ptrace.h>	/* for STACK_FRAME_REGS_MARKER */
 /*
  * Macros used for common Book-e exception handling
  */
@@ -48,6 +49,9 @@
 	stw	r10,0(r11);						     \
 	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
 	stw	r0,GPR0(r11);						     \
+	lis	r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
+	addi	r10, r10, STACK_FRAME_REGS_MARKER@l;			     \
+	stw	r10, 8(r11);						     \
 	SAVE_4GPRS(3, r11);						     \
 	SAVE_2GPRS(7, r11)
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 7f4bd7f..4faeba2 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -94,204 +94,10 @@ _ENTRY(_start);
  */
 
 _ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	match_TLB			/* skip if NPIDS != 3 */
-
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li	r6,0x04
-	tlbivax 0,r6
-	TLBSYNC
-	/* Invalidate TLB1 */
-	li	r6,0x0c
-	tlbivax 0,r6
-	TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
-	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
-	addi	r5, r5, 0x1
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* grab and fixup the RPN */
-	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
-	rlwinm	r6,r6,25,27,31
-	li	r8,-1
-	addi	r6,r6,10
-	slw	r6,r8,r6	/* convert to mask */
-
-	bl	1f		/* Find our address */
-1:	mflr	r7
-
-	mfspr	r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
-	mfspr	r23,SPRN_MAS7
-#endif
-	and	r8,r6,r8
-	subfic	r9,r6,-4096
-	and	r9,r9,r7
-
-	or	r25,r8,r9
-	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,24
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
 
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr   SPRN_MAS6,r6
-	mtspr	SPRN_PID0,r6
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	2f				/* skip if NPIDS != 3 */
-
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
-#else
-#define M_IF_SMP	0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
-	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
-	mtspr	SPRN_MAS2,r6
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r6,(KERNELBASE & ~0xfff)@h
-	ori	r6,r6,(KERNELBASE & ~0xfff)@l
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,(2f - 1b)
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r8,SPRN_MAS1
-	rlwinm	r8,r8,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r8
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
+#define ENTRY_MAPPING_BOOT_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_BOOT_SETUP
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
@@ -639,6 +445,13 @@ interrupt_base:
 	rlwinm	r12,r12,0,16,1
 	mtspr	SPRN_MAS1,r12
 
+	/* Make up the required permissions for kernel code */
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_SX
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
 	b	4f
 
 	/* Get the PGD for the current thread */
@@ -646,15 +459,15 @@ interrupt_base:
 	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
-4:
-	/* Make up the required permissions */
+	/* Make up the required permissions for user code */
 #ifdef CONFIG_PTE_64BIT
-	li	r13,_PAGE_PRESENT | _PAGE_EXEC
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_UX
 	oris	r13,r13,_PAGE_ACCESSED@h
 #else
 	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 #endif
 
+4:
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
 
@@ -747,9 +560,6 @@ finish_tlb_load:
 #else
 	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
 #endif
-#ifdef CONFIG_SMP
-	ori	r12, r12, MAS2_M
-#endif
 	mtspr	SPRN_MAS2, r12
 
 #ifdef CONFIG_PTE_64BIT
@@ -887,13 +697,17 @@ KernelSPE:
 	lwz	r3,_MSR(r1)
 	oris	r3,r3,MSR_SPE@h
 	stw	r3,_MSR(r1)	/* enable use of SPE after return */
+#ifdef CONFIG_PRINTK
 	lis	r3,87f@h
 	ori	r3,r3,87f@l
 	mr	r4,r2		/* current */
 	lwz	r5,_NIP(r1)
 	bl	printk
+#endif
 	b	ret_from_except
+#ifdef CONFIG_PRINTK
 87:	.string	"SPE used in kernel  (task=%p, pc=%x)  \n"
+#endif
 	.align	4,0
 
 #endif /* CONFIG_SPE */
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index a4c8b38..21266ab 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -42,6 +42,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 #include <linux/of_platform.h>
 #include <asm/ibmebus.h>
 #include <asm/abs_addr.h>
@@ -139,14 +140,14 @@ static struct dma_map_ops ibmebus_dma_ops = {
 
 static int ibmebus_match_path(struct device *dev, void *data)
 {
-	struct device_node *dn = to_of_device(dev)->node;
+	struct device_node *dn = to_of_device(dev)->dev.of_node;
 	return (dn->full_name &&
 		(strcasecmp((char *)data, dn->full_name) == 0));
 }
 
 static int ibmebus_match_node(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 static int ibmebus_create_device(struct device_node *dn)
@@ -201,7 +202,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches)
 int ibmebus_register_driver(struct of_platform_driver *drv)
 {
 	/* If the driver uses devices that ibmebus doesn't know, add them */
-	ibmebus_create_devices(drv->match_table);
+	ibmebus_create_devices(drv->driver.of_match_table);
 
 	return of_register_driver(drv, &ibmebus_bus_type);
 }
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 5547ae6..d583917 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -42,26 +42,10 @@
 
 #define DBG(...)
 
-#ifdef CONFIG_IOMMU_VMERGE
-static int novmerge = 0;
-#else
-static int novmerge = 1;
-#endif
-
-static int protect4gb = 1;
+static int novmerge;
 
 static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
 
-static int __init setup_protect4gb(char *str)
-{
-	if (strcmp(str, "on") == 0)
-		protect4gb = 1;
-	else if (strcmp(str, "off") == 0)
-		protect4gb = 0;
-
-	return 1;
-}
-
 static int __init setup_iommu(char *str)
 {
 	if (!strcmp(str, "novmerge"))
@@ -71,7 +55,6 @@ static int __init setup_iommu(char *str)
 	return 1;
 }
 
-__setup("protect4gb=", setup_protect4gb);
 __setup("iommu=", setup_iommu);
 
 static unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 9040330..77be3d0 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,7 +53,6 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
-#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -73,8 +72,10 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
 int __irq_offset_value;
-static int ppc_spurious_interrupts;
 
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(__irq_offset_value);
@@ -143,11 +144,6 @@ notrace void raw_local_irq_restore(unsigned long en)
 	}
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
-	if (test_perf_event_pending()) {
-		clear_perf_event_pending();
-		perf_event_do_pending();
-	}
-
 	/*
 	 * if (get_paca()->hard_enabled) return;
 	 * But again we need to take care that gcc gets hard_enabled directly
@@ -180,30 +176,64 @@ notrace void raw_local_irq_restore(unsigned long en)
 EXPORT_SYMBOL(raw_local_irq_restore);
 #endif /* CONFIG_PPC64 */
 
+static int show_other_interrupts(struct seq_file *p, int prec)
+{
+	int j;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
+	if (tau_initialized) {
+		seq_printf(p, "%*s: ", prec, "TAU");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", tau_interrupts(j));
+		seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
+	}
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT */
+
+	seq_printf(p, "%*s: ", prec, "LOC");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs);
+        seq_printf(p, "  Local timer interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "SPU");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
+	seq_printf(p, "  Spurious interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "CNT");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
+	seq_printf(p, "  Performance monitoring interrupts\n");
+
+	seq_printf(p, "%*s: ", prec, "MCE");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
+	seq_printf(p, "  Machine check exceptions\n");
+
+	return 0;
+}
+
 int show_interrupts(struct seq_file *p, void *v)
 {
-	int i = *(loff_t *)v, j;
+	unsigned long flags, any_count = 0;
+	int i = *(loff_t *) v, j, prec;
 	struct irqaction *action;
 	struct irq_desc *desc;
-	unsigned long flags;
 
+	if (i > nr_irqs)
+		return 0;
+
+	for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
+		j *= 10;
+
+	if (i == nr_irqs)
+		return show_other_interrupts(p, prec);
+
+	/* print header */
 	if (i == 0) {
-		seq_puts(p, "           ");
+		seq_printf(p, "%*s", prec + 8, "");
 		for_each_online_cpu(j)
-			seq_printf(p, "CPU%d       ", j);
+			seq_printf(p, "CPU%-8d", j);
 		seq_putc(p, '\n');
-	} else if (i == nr_irqs) {
-#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
-		if (tau_initialized){
-			seq_puts(p, "TAU: ");
-			for_each_online_cpu(j)
-				seq_printf(p, "%10u ", tau_interrupts(j));
-			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
-		}
-#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
-		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
-
-		return 0;
 	}
 
 	desc = irq_to_desc(i);
@@ -211,69 +241,85 @@ int show_interrupts(struct seq_file *p, void *v)
 		return 0;
 
 	raw_spin_lock_irqsave(&desc->lock, flags);
-
+	for_each_online_cpu(j)
+		any_count |= kstat_irqs_cpu(i, j);
 	action = desc->action;
-	if (!action || !action->handler)
-		goto skip;
+	if (!action && !any_count)
+		goto out;
 
-	seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
+	seq_printf(p, "%*d: ", prec, i);
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
-	seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
 
 	if (desc->chip)
-		seq_printf(p, " %s ", desc->chip->name);
+		seq_printf(p, "  %-16s", desc->chip->name);
 	else
-		seq_puts(p, "  None      ");
+		seq_printf(p, "  %-16s", "None");
+	seq_printf(p, " %-8s", (desc->status & IRQ_LEVEL) ? "Level" : "Edge");
 
-	seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge  ");
-	seq_printf(p, "    %s", action->name);
+	if (action) {
+		seq_printf(p, "     %s", action->name);
+		while ((action = action->next) != NULL)
+			seq_printf(p, ", %s", action->name);
+	}
 
-	for (action = action->next; action; action = action->next)
-		seq_printf(p, ", %s", action->name);
 	seq_putc(p, '\n');
-
-skip:
+out:
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
-
 	return 0;
 }
 
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+	u64 sum = per_cpu(irq_stat, cpu).timer_irqs;
+
+	sum += per_cpu(irq_stat, cpu).pmu_irqs;
+	sum += per_cpu(irq_stat, cpu).mce_exceptions;
+	sum += per_cpu(irq_stat, cpu).spurious_irqs;
+
+	return sum;
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(cpumask_t map)
+void fixup_irqs(const struct cpumask *map)
 {
 	struct irq_desc *desc;
 	unsigned int irq;
 	static int warned;
+	cpumask_var_t mask;
 
-	for_each_irq(irq) {
-		cpumask_t mask;
+	alloc_cpumask_var(&mask, GFP_KERNEL);
 
+	for_each_irq(irq) {
 		desc = irq_to_desc(irq);
-		if (desc && desc->status & IRQ_PER_CPU)
+		if (!desc)
+			continue;
+
+		if (desc->status & IRQ_PER_CPU)
 			continue;
 
-		cpumask_and(&mask, desc->affinity, &map);
-		if (any_online_cpu(mask) == NR_CPUS) {
+		cpumask_and(mask, desc->affinity, map);
+		if (cpumask_any(mask) >= nr_cpu_ids) {
 			printk("Breaking affinity for irq %i\n", irq);
-			mask = map;
+			cpumask_copy(mask, map);
 		}
 		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, &mask);
+			desc->chip->set_affinity(irq, mask);
 		else if (desc->action && !(warned++))
 			printk("Cannot set affinity for irq %i\n", irq);
 	}
 
+	free_cpumask_var(mask);
+
 	local_irq_enable();
 	mdelay(1);
 	local_irq_disable();
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 static inline void handle_one_irq(unsigned int irq)
 {
 	struct thread_info *curtp, *irqtp;
@@ -314,12 +360,6 @@ static inline void handle_one_irq(unsigned int irq)
 	if (irqtp->flags)
 		set_bits(irqtp->flags, &curtp->flags);
 }
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
-	generic_handle_irq(irq);
-}
-#endif
 
 static inline void check_stack_overflow(void)
 {
@@ -353,8 +393,7 @@ void do_IRQ(struct pt_regs *regs)
 	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
 		handle_one_irq(irq);
 	else if (irq != NO_IRQ_IGNORE)
-		/* That's not SMP safe ... but who cares ? */
-		ppc_spurious_interrupts++;
+		__get_cpu_var(irq_stat).spurious_irqs++;
 
 	irq_exit();
 	set_irq_regs(old_regs);
@@ -412,7 +451,6 @@ void exc_lvl_ctx_init(void)
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
@@ -449,10 +487,6 @@ static inline void do_softirq_onstack(void)
 	irqtp->task = NULL;
 }
 
-#else
-#define do_softirq_onstack()	__do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
 void do_softirq(void)
 {
 	unsigned long flags;
@@ -474,7 +508,7 @@ void do_softirq(void)
  */
 
 static LIST_HEAD(irq_hosts);
-static DEFINE_SPINLOCK(irq_big_lock);
+static DEFINE_RAW_SPINLOCK(irq_big_lock);
 static unsigned int revmap_trees_allocated;
 static DEFINE_MUTEX(revmap_trees_mutex);
 struct irq_map_entry irq_map[NR_IRQS];
@@ -520,14 +554,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* If it's a legacy controller, check for duplicates and
 	 * mark it as allocated (we use irq 0 host pointer for that
 	 */
 	if (revmap_type == IRQ_HOST_MAP_LEGACY) {
 		if (irq_map[0].host != NULL) {
-			spin_unlock_irqrestore(&irq_big_lock, flags);
+			raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 			/* If we are early boot, we can't free the structure,
 			 * too bad...
 			 * this will be fixed once slab is made available early
@@ -541,7 +575,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	}
 
 	list_add(&host->link, &irq_hosts);
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 
 	/* Additional setups per revmap type */
 	switch(revmap_type) {
@@ -592,13 +626,13 @@ struct irq_host *irq_find_host(struct device_node *node)
 	 * the absence of a device node. This isn't a problem so far
 	 * yet though...
 	 */
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	list_for_each_entry(h, &irq_hosts, link)
 		if (h->ops->match(h, node)) {
 			found = h;
 			break;
 		}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 EXPORT_SYMBOL_GPL(irq_find_host);
@@ -967,7 +1001,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 	if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
 		return NO_IRQ;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 
 	/* Use hint for 1 interrupt if any */
 	if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
@@ -991,7 +1025,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		}
 	}
 	if (found == NO_IRQ) {
-		spin_unlock_irqrestore(&irq_big_lock, flags);
+		raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 		return NO_IRQ;
 	}
  hint_found:
@@ -1000,7 +1034,7 @@ unsigned int irq_alloc_virt(struct irq_host *host,
 		smp_wmb();
 		irq_map[i].host = host;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 	return found;
 }
 
@@ -1012,7 +1046,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 	WARN_ON (virq < NUM_ISA_INTERRUPTS);
 	WARN_ON (count == 0 || (virq + count) > irq_virq_count);
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	raw_spin_lock_irqsave(&irq_big_lock, flags);
 	for (i = virq; i < (virq + count); i++) {
 		struct irq_host *host;
 
@@ -1025,7 +1059,7 @@ void irq_free_virt(unsigned int virq, unsigned int count)
 		smp_wmb();
 		irq_map[i].host = NULL;
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	raw_spin_unlock_irqrestore(&irq_big_lock, flags);
 }
 
 int arch_early_irq_init(void)
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index b6bd1ea..82a7b22 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -20,6 +20,7 @@
 #include <linux/smp.h>
 #include <linux/signal.h>
 #include <linux/ptrace.h>
+#include <linux/kdebug.h>
 #include <asm/current.h>
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -115,7 +116,8 @@ void kgdb_roundup_cpus(unsigned long flags)
 /* KGDB functions to use existing PowerPC64 hooks. */
 static int kgdb_debugger(struct pt_regs *regs)
 {
-	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+	return !kgdb_handle_exception(1, computeSignal(TRAP(regs)),
+				      DIE_OOPS, regs);
 }
 
 static int kgdb_handle_breakpoint(struct pt_regs *regs)
@@ -123,7 +125,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	if (user_mode(regs))
 		return 0;
 
-	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+	if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
 		return 0;
 
 	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
@@ -309,6 +311,11 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->nip = pc;
+}
+
 /*
  * This function does PowerPC specific procesing for interfacing to gdb.
  */
@@ -333,7 +340,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			mtspr(SPRN_DBCR0,
 			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
 			linux_regs->msr |= MSR_DE;
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c932978..bc47352 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -31,12 +31,13 @@
 #include <linux/preempt.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>
+#include <linux/slab.h>
 #include <asm/cacheflush.h>
 #include <asm/sstep.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 #define MSR_SINGLESTEP	(MSR_DE)
 #else
 #define MSR_SINGLESTEP	(MSR_SE)
@@ -110,9 +111,12 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	 * like Decrementer or External Interrupt */
 	regs->msr &= ~MSR_EE;
 	regs->msr |= MSR_SINGLESTEP;
-#ifdef CONFIG_BOOKE
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	regs->msr &= ~MSR_CE;
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+#ifdef CONFIG_PPC_47x
+	isync();
+#endif
 #endif
 
 	/*
@@ -374,17 +378,6 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
  * single-stepped a copy of the instruction.  The address of this
  * copy is p->ainsn.insn.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
-{
-	int ret;
-	unsigned int insn = *p->ainsn.insn;
-
-	regs->nip = (unsigned long)p->addr;
-	ret = emulate_step(regs, insn);
-	if (ret == 0)
-		regs->nip = (unsigned long)p->addr + 4;
-}
-
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
@@ -402,7 +395,8 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(cur, regs);
+	/* Adjust nip to after the single-stepped instruction */
+	regs->nip = (unsigned long)cur->addr + 4;
 	regs->msr |= kcb->kprobe_saved_msr;
 
 	/*Restore back the original saved kprobes variables and continue. */
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 9ddfaef..035ada5 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -469,7 +469,7 @@ static int __init serial_dev_init(void)
 		return -ENODEV;
 
 	/*
-	 * Before we register the platfrom serial devices, we need
+	 * Before we register the platform serial devices, we need
 	 * to fixup their interrupts and their IO ports.
 	 */
 	DBG("Fixing serial ports interrupts and IO ports ...\n");
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 79a00bb..50362b6 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -24,6 +24,7 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <asm/iseries/hv_lp_config.h>
 #include <asm/lppaca.h>
@@ -37,7 +38,7 @@
 #include <asm/vio.h>
 #include <asm/mmu.h>
 
-#define MODULE_VERS "1.8"
+#define MODULE_VERS "1.9"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -359,7 +360,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 
 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
-		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+		printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 		       __FILE__, __func__, __LINE__);
 		return;
 	}
@@ -383,13 +384,13 @@ static void parse_system_parameter_string(struct seq_file *m)
 		int idx, w_idx;
 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 		if (!workbuffer) {
-			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+			printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
 			       __FILE__, __func__, __LINE__);
 			kfree(local_buffer);
 			return;
 		}
 #ifdef LPARCFG_DEBUG
-		printk(KERN_INFO "success calling get-system-parameter \n");
+		printk(KERN_INFO "success calling get-system-parameter\n");
 #endif
 		splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
 		local_buffer += 2;	/* step over strlen value */
@@ -440,7 +441,7 @@ static int lparcfg_count_active_processors(void)
 
 	while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
 #ifdef LPARCFG_DEBUG
-		printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
+		printk(KERN_ERR "cpus_dn %p\n", cpus_dn);
 #endif
 		count++;
 	}
@@ -486,6 +487,14 @@ static void splpar_dispatch_data(struct seq_file *m)
 	seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions);
 }
 
+static void parse_em_data(struct seq_file *m)
+{
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+	if (plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS)
+		seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -540,6 +549,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 
 	seq_printf(m, "slb_size=%d\n", mmu_slb_size);
 
+	parse_em_data(m);
+
 	return 0;
 }
 
@@ -725,7 +736,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
 	const unsigned int *lp_index_ptr;
 	unsigned int lp_index = 0;
 
-	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
+	seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS);
 
 	rootdn = of_find_node_by_path("/");
 	if (rootdn) {
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index bb3d893..89f0051 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,7 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -66,11 +66,11 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -133,9 +133,9 @@ void __init reserve_crashkernel(void)
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(lmb_phys_mem_size() >> 20));
+			(unsigned long)(memblock_phys_mem_size() >> 20));
 
-	lmb_reserve(crashk_res.start, crash_size);
+	memblock_reserve(crashk_res.start, crash_size);
 }
 
 int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 040bd1d..ed31a29 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -155,66 +155,70 @@ void kexec_copy_flush(struct kimage *image)
 
 #ifdef CONFIG_SMP
 
-/* FIXME: we should schedule this function to be called on all cpus based
- * on calling the interrupts, but we would like to call it off irq level
- * so that the interrupt controller is clean.
- */
+static int kexec_all_irq_disabled = 0;
+
 static void kexec_smp_down(void *arg)
 {
+	local_irq_disable();
+	mb(); /* make sure our irqs are disabled before we say they are */
+	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+	while(kexec_all_irq_disabled == 0)
+		cpu_relax();
+	mb(); /* make sure all irqs are disabled before this */
+	/*
+	 * Now every CPU has IRQs off, we can clear out any pending
+	 * IPIs and be sure that no more will come in after this.
+	 */
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 1);
 
-	local_irq_disable();
 	kexec_smp_wait();
 	/* NOTREACHED */
 }
 
-static void kexec_prepare_cpus(void)
+static void kexec_prepare_cpus_wait(int wait_state)
 {
 	int my_cpu, i, notified=-1;
 
-	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	my_cpu = get_cpu();
-
-	/* check the others cpus are now down (via paca hw cpu id == -1) */
-	for (i=0; i < NR_CPUS; i++) {
+	/* Make sure each CPU has atleast made it to the state we need */
+	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
 
-		while (paca[i].hw_cpu_id != -1) {
+		while (paca[i].kexec_state < wait_state) {
 			barrier();
-			if (!cpu_possible(i)) {
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" possible, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
-			if (!cpu_online(i)) {
-				/* Fixme: this can be spinning in
-				 * pSeries_secondary_wait with a paca
-				 * waiting for it to go online.
-				 */
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" online, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
 			if (i != notified) {
 				printk( "kexec: waiting for cpu %d (physical"
-						" %d) to go down\n",
-						i, paca[i].hw_cpu_id);
+						" %d) to enter %i state\n",
+					i, paca[i].hw_cpu_id, wait_state);
 				notified = i;
 			}
 		}
 	}
+	mb();
+}
+
+static void kexec_prepare_cpus(void)
+{
+
+	smp_call_function(kexec_smp_down, NULL, /* wait */0);
+	local_irq_disable();
+	mb(); /* make sure IRQs are disabled before we say they are */
+	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+
+	kexec_prepare_cpus_wait(KEXEC_STATE_IRQS_OFF);
+	/* we are sure every CPU has IRQs off at this point */
+	kexec_all_irq_disabled = 1;
 
 	/* after we tell the others to go down */
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 0);
 
-	put_cpu();
+	/* Before removing MMU mapings make sure all CPUs have entered real mode */
+	kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE);
 
-	local_irq_disable();
+	put_cpu();
 }
 
 #else /* ! SMP */
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 2d29752..22e507c 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -127,3 +127,29 @@ _GLOBAL(__setup_cpu_power7)
 _GLOBAL(__restore_cpu_power7)
 	/* place holder */
 	blr
+
+/*
+ * Get a minimal set of registers for our caller's nth caller.
+ * r3 = regs pointer, r5 = n.
+ *
+ * We only get R1 (stack pointer), NIP (next instruction pointer)
+ * and LR (link register).  These are all we can get in the
+ * general case without doing complicated stack unwinding, but
+ * fortunately they are enough to do a stack backtrace, which
+ * is all we need them for.
+ */
+_GLOBAL(perf_arch_fetch_caller_regs)
+	mr	r6,r1
+	cmpwi	r5,0
+	mflr	r4
+	ble	2f
+	mtctr	r5
+1:	PPC_LL	r6,0(r6)
+	bdnz	1b
+	PPC_LL	r4,PPC_LR_STKOFF(r6)
+2:	PPC_LL	r7,0(r6)
+	PPC_LL	r7,PPC_LR_STKOFF(r7)
+	PPC_STL	r6,GPR1-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r4,_NIP-STACK_FRAME_OVERHEAD(r3)
+	PPC_STL	r7,_LINK-STACK_FRAME_OVERHEAD(r3)
+	blr
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8649f53..6bbd7a6 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -33,7 +33,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
@@ -56,7 +55,6 @@ _GLOBAL(call_handle_irq)
 	lwz	r0,4(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 /*
  * This returns the high 64 bits of the product of two 64-bit numbers.
@@ -441,7 +439,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
-#ifndef CONFIG_44x
+#ifdef CONFIG_44x
 	/* We don't flush the icache on 44x. Those have a virtual icache
 	 * and we don't have access to the virtual address here (it's
 	 * not the page vaddr but where it's mapped in user space). The
@@ -449,15 +447,19 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	 * a change in the address space occurs, before returning to
 	 * user space
 	 */
+BEGIN_MMU_FTR_SECTION
+	blr
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
+#endif /* CONFIG_44x */
 	mtctr	r4
 1:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	isync
-#endif /* CONFIG_44x */
 	blr
 
+#ifndef CONFIG_BOOKE
 /*
  * Flush a particular page from the data cache to RAM, identified
  * by its physical address.  We turn off the MMU so we can just use
@@ -490,6 +492,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	mtmsr	r10				/* restore DR */
 	isync
 	blr
+#endif /* CONFIG_BOOKE */
 
 /*
  * Clear pages using the dcbz instruction, which doesn't cause any
@@ -706,6 +709,22 @@ relocate_new_kernel:
 	/* r4 = reboot_code_buffer */
 	/* r5 = start_address      */
 
+#ifdef CONFIG_FSL_BOOKE
+
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+#define ENTRY_MAPPING_KEXEC_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_KEXEC_SETUP
+
+	mr      r3, r29
+	mr      r4, r30
+	mr      r5, r31
+
+	li	r0, 0
+#else
 	li	r0, 0
 
 	/*
@@ -722,6 +741,7 @@ relocate_new_kernel:
 	rfi
 
 1:
+#endif
 	/* from this point address translation is turned off */
 	/* and interrupts are disabled */
 
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index a5cf9c1..e514490 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -24,10 +24,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
+#include <asm/kexec.h>
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	std	r0,16(r1)
@@ -51,7 +51,6 @@ _GLOBAL(call_handle_irq)
 	ld	r0,16(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 	.section	".toc","aw"
 PPC64_CACHES:
@@ -471,6 +470,10 @@ _GLOBAL(kexec_wait)
 1:	mflr	r5
 	addi	r5,r5,kexec_flag-1b
 
+	li	r4,KEXEC_STATE_REAL_MODE
+	stb	r4,PACAKEXECSTATE(r13)
+	SYNC
+
 99:	HMT_LOW
 #ifdef CONFIG_KEXEC		/* use no memory without kexec */
 	lwz	r4,0(r5)
@@ -494,14 +497,11 @@ kexec_flag:
  * note: this is a terminal routine, it does not save lr
  *
  * get phys id from paca
- * set paca id to -1 to say we got here
  * switch to real mode
  * join other cpus in kexec_wait(phys_id)
  */
 _GLOBAL(kexec_smp_wait)
 	lhz	r3,PACAHWCPUID(r13)
-	li	r4,-1
-	sth	r4,PACAHWCPUID(r13)	/* let others know we left */
 	bl	real_mode
 	b	.kexec_wait
 
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index ad461e7..9cf197f 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -338,8 +338,8 @@ static int __init nvram_create_os_partition(void)
 
 	rc = nvram_write_header(new_part);
 	if (rc <= 0) {
-		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \
-				failed (%d)\n", rc);
+		printk(KERN_ERR "nvram_create_os_partition: nvram_write_header "
+				"failed (%d)\n", rc);
 		return rc;
 	}
 
@@ -349,7 +349,7 @@ static int __init nvram_create_os_partition(void)
 	rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index);
 	if (rc <= 0) {
 		printk(KERN_ERR "nvram_create_os_partition: nvram_write "
-				"failed (%d)\n", rc);
+		       "failed (%d)\n", rc);
 		return rc;
 	}
 	
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index a359cb0..df78e02 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -13,7 +13,7 @@
 static void of_device_make_bus_id(struct of_device *dev)
 {
 	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->node;
+	struct device_node *node = dev->dev.of_node;
 	const u32 *reg;
 	u64 addr;
 	int magic;
@@ -69,11 +69,10 @@ struct of_device *of_device_alloc(struct device_node *np,
 	if (!dev)
 		return NULL;
 
-	dev->node = of_node_get(np);
-	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dev.of_node = of_node_get(np);
+	dev->dev.dma_mask = &dev->archdata.dma_mask;
 	dev->dev.parent = parent;
 	dev->dev.release = of_release_dev;
-	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
 		dev_set_name(&dev->dev, "%s", bus_id);
@@ -95,17 +94,17 @@ int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 	ofdev = to_of_device(dev);
 
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
 		return -ENOMEM;
 
         /* Since the compatible field can contain pretty much anything
          * it's not really legal to split it out with commas. We split it
          * up using a number of environment variables instead. */
 
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
 	while (compat && *compat && cplen > 0) {
 		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
 			return -ENOMEM;
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 1a4fc0d..487a988 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
-#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -75,7 +74,7 @@ struct of_device* of_platform_device_create(struct device_node *np,
 	if (!dev)
 		return NULL;
 
-	dev->dma_mask = 0xffffffffUL;
+	dev->archdata.dma_mask = 0xffffffffUL;
 	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	dev->dev.bus = &of_platform_bus_type;
@@ -196,7 +195,7 @@ EXPORT_SYMBOL(of_platform_bus_probe);
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 struct of_device *of_find_device_by_node(struct device_node *np)
@@ -214,7 +213,7 @@ EXPORT_SYMBOL(of_find_device_by_node);
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->linux_phandle == *ph;
+	return to_of_device(dev)->dev.of_node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
@@ -247,10 +246,10 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
 	if (ppc_md.pci_setup_phb == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO "Setting up PCI bus %s\n", dev->node->full_name);
+	pr_info("Setting up PCI bus %s\n", dev->dev.of_node->full_name);
 
 	/* Alloc and setup PHB data structure */
-	phb = pcibios_alloc_controller(dev->node);
+	phb = pcibios_alloc_controller(dev->dev.of_node);
 	if (!phb)
 		return -ENODEV;
 
@@ -264,19 +263,19 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
 	}
 
 	/* Process "ranges" property */
-	pci_process_bridge_OF_ranges(phb, dev->node, 0);
+	pci_process_bridge_OF_ranges(phb, dev->dev.of_node, 0);
 
 	/* Init pci_dn data structures */
 	pci_devs_phb_init_dynamic(phb);
 
 	/* Register devices with EEH */
 #ifdef CONFIG_EEH
-	if (dev->node->child)
-		eeh_add_device_tree_early(dev->node);
+	if (dev->dev.of_node->child)
+		eeh_add_device_tree_early(dev->dev.of_node);
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	pcibios_scan_phb(phb, dev->node);
+	pcibios_scan_phb(phb, dev->dev.of_node);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
@@ -307,10 +306,11 @@ static struct of_device_id of_pci_phb_ids[] = {
 };
 
 static struct of_platform_driver of_pci_phb_driver = {
-	.match_table = of_pci_phb_ids,
 	.probe = of_pci_phb_probe,
 	.driver = {
 		.name = "of-pci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_pci_phb_ids,
 	},
 };
 
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index d16b1ea..139a773 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -9,11 +9,16 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
+#include <linux/memblock.h>
 
+#include <asm/firmware.h>
 #include <asm/lppaca.h>
 #include <asm/paca.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
+#include <asm/iseries/lpar_map.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/kexec.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -70,37 +75,83 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
  * processors.  The processor VPD array needs one entry per physical
  * processor (not thread).
  */
-struct paca_struct paca[NR_CPUS];
+struct paca_struct *paca;
 EXPORT_SYMBOL(paca);
 
-void __init initialise_pacas(void)
-{
-	int cpu;
+struct paca_struct boot_paca;
 
-	/* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
-	 * of the TOC can be addressed using a single machine instruction.
-	 */
+void __init initialise_paca(struct paca_struct *new_paca, int cpu)
+{
+       /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
+	* of the TOC can be addressed using a single machine instruction.
+	*/
 	unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL;
 
-	/* Can't use for_each_*_cpu, as they aren't functional yet */
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-		struct paca_struct *new_paca = &paca[cpu];
-
 #ifdef CONFIG_PPC_BOOK3S
-		new_paca->lppaca_ptr = &lppaca[cpu];
+	new_paca->lppaca_ptr = &lppaca[cpu];
 #else
-		new_paca->kernel_pgd = swapper_pg_dir;
+	new_paca->kernel_pgd = swapper_pg_dir;
 #endif
-		new_paca->lock_token = 0x8000;
-		new_paca->paca_index = cpu;
-		new_paca->kernel_toc = kernel_toc;
-		new_paca->kernelbase = (unsigned long) _stext;
-		new_paca->kernel_msr = MSR_KERNEL;
-		new_paca->hw_cpu_id = 0xffff;
-		new_paca->__current = &init_task;
+	new_paca->lock_token = 0x8000;
+	new_paca->paca_index = cpu;
+	new_paca->kernel_toc = kernel_toc;
+	new_paca->kernelbase = (unsigned long) _stext;
+	new_paca->kernel_msr = MSR_KERNEL;
+	new_paca->hw_cpu_id = 0xffff;
+	new_paca->kexec_state = KEXEC_STATE_NONE;
+	new_paca->__current = &init_task;
 #ifdef CONFIG_PPC_STD_MMU_64
-		new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+	new_paca->slb_shadow_ptr = &slb_shadow[cpu];
 #endif /* CONFIG_PPC_STD_MMU_64 */
+}
+
+static int __initdata paca_size;
+
+void __init allocate_pacas(void)
+{
+	int nr_cpus, cpu, limit;
+
+	/*
+	 * We can't take SLB misses on the paca, and we want to access them
+	 * in real mode, so allocate them within the RMA and also within
+	 * the first segment. On iSeries they must be within the area mapped
+	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
+	 */
+	limit = min(0x10000000ULL, memblock.rmo_size);
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		limit = min(limit, HvPagesToMap * HVPAGESIZE);
+
+	nr_cpus = NR_CPUS;
+	/* On iSeries we know we can never have more than 64 cpus */
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		nr_cpus = min(64, nr_cpus);
+
+	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
+
+	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
+	memset(paca, 0, paca_size);
+
+	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
+		paca_size, nr_cpus, paca);
+
+	/* Can't use for_each_*_cpu, as they aren't functional yet */
+	for (cpu = 0; cpu < nr_cpus; cpu++)
+		initialise_paca(&paca[cpu], cpu);
+}
+
+void __init free_unused_pacas(void)
+{
+	int new_size;
+
+	new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus());
+
+	if (new_size >= paca_size)
+		return;
+
+	memblock_free(__pa(paca) + new_size, paca_size - new_size);
+
+	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
+		paca_size - new_size);
 
-	}
+	paca_size = new_size;
 }
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index cadbed6..5b38f6a 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -26,6 +26,7 @@
 #include <linux/syscalls.h>
 #include <linux/irq.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -63,21 +64,6 @@ struct dma_map_ops *get_pci_dma_ops(void)
 }
 EXPORT_SYMBOL(get_pci_dma_ops);
 
-int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return dma_set_mask(&dev->dev, mask);
-}
-
-int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	int rc;
-
-	rc = dma_set_mask(&dev->dev, mask);
-	dev->dev.coherent_dma_mask = dev->dma_mask;
-
-	return rc;
-}
-
 struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
 	struct pci_controller *phb;
@@ -1047,10 +1033,8 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
 
 	struct pci_dev *dev = bus->self;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
-		if ((res = bus->resource[i]) == NULL)
-			continue;
-		if (!res->flags)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags)
 			continue;
 		if (i >= 3 && bus->self->transparent)
 			continue;
@@ -1113,8 +1097,8 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
 		if (dev->is_added)
 			continue;
 
-		/* Setup OF node pointer in archdata */
-		sd->of_node = pci_device_to_OF_node(dev);
+		/* Setup OF node pointer in the device */
+		dev->dev.of_node = pci_device_to_OF_node(dev);
 
 		/* Fixup NUMA node as it may not be setup yet by the generic
 		 * code and is needed by the DMA init
@@ -1181,21 +1165,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (skip_isa_ioresource_align(dev))
-			return;
-		if (start & 0x300) {
+			return start;
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+
+	return start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
@@ -1278,9 +1261,8 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
 		 pci_domain_nr(bus), bus->number);
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
-		if ((res = bus->resource[i]) == NULL || !res->flags
-		    || res->start > res->end || res->parent)
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags || res->start > res->end || res->parent)
 			continue;
 		if (bus->parent == NULL)
 			pr = (res->flags & IORESOURCE_IO) ?
@@ -1327,6 +1309,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index c13668c..e7db5b4 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/list.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index ccf56ac..d43fc65 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -224,7 +224,7 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus,
 	 * G5 machines... So when something asks for bus 0 io base
 	 * (bus 0 is HT root), we return the AGP one instead.
 	 */
-	if (in_bus == 0 && machine_is_compatible("MacRISC4")) {
+	if (in_bus == 0 && of_machine_is_compatible("MacRISC4")) {
 		struct device_node *agp;
 
 		agp = of_find_compatible_node(NULL, NULL, "u3-agp");
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d5e36e5..d56b35e 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <linux/init.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 7311fdf..6ddb795f 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -123,6 +123,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 {
 	struct pci_dev *dev;
 	const char *type;
+	struct pci_slot *slot;
 
 	dev = alloc_pci_dev();
 	if (!dev)
@@ -140,6 +141,11 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
 	dev->needs_freset = 0;		/* pcie fundamental reset required */
+	set_pcie_port_type(dev);
+
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
 
 	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
 	dev->device = get_int_prop(node, "device-id", 0xffff);
@@ -160,10 +166,14 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev->error_state = pci_channel_io_normal;
 	dev->dma_mask = 0xffffffff;
 
+	/* Early fixups, before probing the BARs */
+	pci_fixup_device(pci_fixup_early, dev);
+
 	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+		set_pcie_hotplug_bridge(dev);
 	} else if (!strcmp(type, "cardbus")) {
 		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
 	} else {
@@ -294,12 +304,14 @@ static void __devinit __of_scan_bus(struct device_node *node,
 	int reglen, devfn;
 	struct pci_dev *dev;
 
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
+	pr_debug("of_scan_bus(%s) bus no %d...\n",
 		 node->full_name, bus->number);
 
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
 		pr_debug("  * %s\n", child->full_name);
+		if (!of_device_is_available(child))
+			continue;
 		reg = of_get_property(child, "reg", &reglen);
 		if (reg == NULL || reglen < 20)
 			continue;
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
index a3c11ca..95ad9da 100644
--- a/arch/powerpc/kernel/perf_callchain.c
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -495,9 +495,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 
 	entry->nr = 0;
 
-	if (current->pid == 0)		/* idle task? */
-		return entry;
-
 	if (!user_mode(regs)) {
 		perf_callchain_kernel(regs, entry);
 		if (current->mm)
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 1eb85fb..5c14ffe 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -35,6 +35,9 @@ struct cpu_hw_events {
 	u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+
+	unsigned int group_flag;
+	int n_txn_start;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
@@ -718,66 +721,6 @@ static int collect_events(struct perf_event *group, int max_count,
 	return n;
 }
 
-static void event_sched_in(struct perf_event *event, int cpu)
-{
-	event->state = PERF_EVENT_STATE_ACTIVE;
-	event->oncpu = cpu;
-	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
-	if (is_software_event(event))
-		event->pmu->enable(event);
-}
-
-/*
- * Called to enable a whole group of events.
- * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
- * Assumes the caller has disabled interrupts and has
- * frozen the PMU with hw_perf_save_disable.
- */
-int hw_perf_group_sched_in(struct perf_event *group_leader,
-	       struct perf_cpu_context *cpuctx,
-	       struct perf_event_context *ctx, int cpu)
-{
-	struct cpu_hw_events *cpuhw;
-	long i, n, n0;
-	struct perf_event *sub;
-
-	if (!ppmu)
-		return 0;
-	cpuhw = &__get_cpu_var(cpu_hw_events);
-	n0 = cpuhw->n_events;
-	n = collect_events(group_leader, ppmu->n_counter - n0,
-			   &cpuhw->event[n0], &cpuhw->events[n0],
-			   &cpuhw->flags[n0]);
-	if (n < 0)
-		return -EAGAIN;
-	if (check_excludes(cpuhw->event, cpuhw->flags, n0, n))
-		return -EAGAIN;
-	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
-	if (i < 0)
-		return -EAGAIN;
-	cpuhw->n_events = n0 + n;
-	cpuhw->n_added += n;
-
-	/*
-	 * OK, this group can go on; update event states etc.,
-	 * and enable any software events
-	 */
-	for (i = n0; i < n0 + n; ++i)
-		cpuhw->event[i]->hw.config = cpuhw->events[i];
-	cpuctx->active_oncpu += n;
-	n = 1;
-	event_sched_in(group_leader, cpu);
-	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
-		if (sub->state != PERF_EVENT_STATE_OFF) {
-			event_sched_in(sub, cpu);
-			++n;
-		}
-	}
-	ctx->nr_active += n;
-
-	return 1;
-}
-
 /*
  * Add a event to the PMU.
  * If all events are not already frozen, then we disable and
@@ -805,12 +748,22 @@ static int power_pmu_enable(struct perf_event *event)
 	cpuhw->event[n0] = event;
 	cpuhw->events[n0] = event->hw.config;
 	cpuhw->flags[n0] = event->hw.event_base;
+
+	/*
+	 * If group events scheduling transaction was started,
+	 * skip the schedulability test here, it will be peformed
+	 * at commit time(->commit_txn) as a whole
+	 */
+	if (cpuhw->group_flag & PERF_EVENT_TXN_STARTED)
+		goto nocheck;
+
 	if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
 		goto out;
 	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
 		goto out;
-
 	event->hw.config = cpuhw->events[n0];
+
+nocheck:
 	++cpuhw->n_events;
 	++cpuhw->n_added;
 
@@ -838,8 +791,11 @@ static void power_pmu_disable(struct perf_event *event)
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	for (i = 0; i < cpuhw->n_events; ++i) {
 		if (event == cpuhw->event[i]) {
-			while (++i < cpuhw->n_events)
+			while (++i < cpuhw->n_events) {
 				cpuhw->event[i-1] = cpuhw->event[i];
+				cpuhw->events[i-1] = cpuhw->events[i];
+				cpuhw->flags[i-1] = cpuhw->flags[i];
+			}
 			--cpuhw->n_events;
 			ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
 			if (event->hw.idx) {
@@ -896,11 +852,65 @@ static void power_pmu_unthrottle(struct perf_event *event)
 	local_irq_restore(flags);
 }
 
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+void power_pmu_start_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuhw->n_txn_start = cpuhw->n_events;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+void power_pmu_cancel_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+int power_pmu_commit_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw;
+	long i, n;
+
+	if (!ppmu)
+		return -EAGAIN;
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	n = cpuhw->n_events;
+	if (check_excludes(cpuhw->event, cpuhw->flags, 0, n))
+		return -EAGAIN;
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n);
+	if (i < 0)
+		return -EAGAIN;
+
+	for (i = cpuhw->n_txn_start; i < n; ++i)
+		cpuhw->event[i]->hw.config = cpuhw->events[i];
+
+	return 0;
+}
+
 struct pmu power_pmu = {
 	.enable		= power_pmu_enable,
 	.disable	= power_pmu_disable,
 	.read		= power_pmu_read,
 	.unthrottle	= power_pmu_unthrottle,
+	.start_txn	= power_pmu_start_txn,
+	.cancel_txn	= power_pmu_cancel_txn,
+	.commit_txn	= power_pmu_commit_txn,
 };
 
 /*
@@ -1164,10 +1174,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.addr	= ~0ULL,
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, ~0ULL);
+		data.period = event->hw.last_period;
 
 		if (event->attr.sample_type & PERF_SAMPLE_ADDR)
 			perf_get_data_addr(regs, &data.addr);
@@ -1287,7 +1297,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 		irq_exit();
 }
 
-void hw_perf_event_setup(int cpu)
+static void power_pmu_setup(int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
 
@@ -1297,6 +1307,23 @@ void hw_perf_event_setup(int cpu)
 	cpuhw->mmcr[0] = MMCR0_FC;
 }
 
+static int __cpuinit
+power_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		power_pmu_setup(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 int register_power_pmu(struct power_pmu *pmu)
 {
 	if (ppmu)
@@ -1314,5 +1341,7 @@ int register_power_pmu(struct power_pmu *pmu)
 		freeze_events_kernel = MMCR0_FCHV;
 #endif /* CONFIG_PPC64 */
 
+	perf_cpu_notifier(power_pmu_notifier);
+
 	return 0;
 }
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
new file mode 100644
index 0000000..babccee
--- /dev/null
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -0,0 +1,654 @@
+/*
+ * Performance event support - Freescale Embedded Performance Monitor
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/reg_fsl_emb.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+struct cpu_hw_events {
+	int n_events;
+	int disabled;
+	u8  pmcs_enabled;
+	struct perf_event *event[MAX_HWEVENTS];
+};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct fsl_emb_pmu *ppmu;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+#ifdef __powerpc64__
+	return !regs->softe;
+#else
+	return 0;
+#endif
+}
+
+static void perf_event_interrupt(struct pt_regs *regs);
+
+/*
+ * Read one performance monitor counter (PMC).
+ */
+static unsigned long read_pmc(int idx)
+{
+	unsigned long val;
+
+	switch (idx) {
+	case 0:
+		val = mfpmr(PMRN_PMC0);
+		break;
+	case 1:
+		val = mfpmr(PMRN_PMC1);
+		break;
+	case 2:
+		val = mfpmr(PMRN_PMC2);
+		break;
+	case 3:
+		val = mfpmr(PMRN_PMC3);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Write one PMC.
+ */
+static void write_pmc(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMC0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMC1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMC2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMC3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control A register
+ */
+static void write_pmlca(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCA0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCA1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCA2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCA3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
+	}
+
+	isync();
+}
+
+/*
+ * Write one local control B register
+ */
+static void write_pmlcb(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 0:
+		mtpmr(PMRN_PMLCB0, val);
+		break;
+	case 1:
+		mtpmr(PMRN_PMLCB1, val);
+		break;
+	case 2:
+		mtpmr(PMRN_PMLCB2, val);
+		break;
+	case 3:
+		mtpmr(PMRN_PMLCB3, val);
+		break;
+	default:
+		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
+	}
+
+	isync();
+}
+
+static void fsl_emb_pmu_read(struct perf_event *event)
+{
+	s64 val, delta, prev;
+
+	/*
+	 * Performance monitor interrupts come even when interrupts
+	 * are soft-disabled, as long as interrupts are hard-enabled.
+	 * Therefore we treat them like NMIs.
+	 */
+	do {
+		prev = atomic64_read(&event->hw.prev_count);
+		barrier();
+		val = read_pmc(event->hw.idx);
+	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+	/* The counters are only 32 bits wide */
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &event->hw.period_left);
+}
+
+/*
+ * Disable all events to prevent PMU interrupts and to allow
+ * events to be added or removed.
+ */
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuhw->disabled) {
+		cpuhw->disabled = 1;
+
+		/*
+		 * Check if we ever enabled the PMU on this cpu.
+		 */
+		if (!cpuhw->pmcs_enabled) {
+			ppc_enable_pmcs();
+			cpuhw->pmcs_enabled = 1;
+		}
+
+		if (atomic_read(&num_events)) {
+			/*
+			 * Set the 'freeze all counters' bit, and disable
+			 * interrupts.  The barrier is to make sure the
+			 * mtpmr has been executed and the PMU has frozen
+			 * the events before we return.
+			 */
+
+			mtpmr(PMRN_PMGC0, PMGC0_FAC);
+			isync();
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable all events if disable == 0.
+ * If we were previously disabled and events were added, then
+ * put the new config on the PMU.
+ */
+void hw_perf_enable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	if (!cpuhw->disabled)
+		goto out;
+
+	cpuhw->disabled = 0;
+	ppc_set_pmu_inuse(cpuhw->n_events != 0);
+
+	if (cpuhw->n_events > 0) {
+		mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+		isync();
+	}
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *ctrs[])
+{
+	int n = 0;
+	struct perf_event *event;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		ctrs[n] = group;
+		n++;
+	}
+	list_for_each_entry(event, &group->sibling_list, group_entry) {
+		if (!is_software_event(event) &&
+		    event->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			ctrs[n] = event;
+			n++;
+		}
+	}
+	return n;
+}
+
+/* perf must be disabled, context locked on entry */
+static int fsl_emb_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int ret = -EAGAIN;
+	int num_counters = ppmu->n_counter;
+	u64 val;
+	int i;
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED)
+		num_counters = ppmu->n_restricted;
+
+	/*
+	 * Allocate counters from top-down, so that restricted-capable
+	 * counters are kept free as long as possible.
+	 */
+	for (i = num_counters - 1; i >= 0; i--) {
+		if (cpuhw->event[i])
+			continue;
+
+		break;
+	}
+
+	if (i < 0)
+		goto out;
+
+	event->hw.idx = i;
+	cpuhw->event[i] = event;
+	++cpuhw->n_events;
+
+	val = 0;
+	if (event->hw.sample_period) {
+		s64 left = atomic64_read(&event->hw.period_left);
+		if (left < 0x80000000L)
+			val = 0x80000000L - left;
+	}
+	atomic64_set(&event->hw.prev_count, val);
+	write_pmc(i, val);
+	perf_event_update_userpage(event);
+
+	write_pmlcb(i, event->hw.config >> 32);
+	write_pmlca(i, event->hw.config_base);
+
+	ret = 0;
+ out:
+	put_cpu_var(cpu_hw_events);
+	return ret;
+}
+
+/* perf must be disabled, context locked on entry */
+static void fsl_emb_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	int i = event->hw.idx;
+
+	if (i < 0)
+		goto out;
+
+	fsl_emb_pmu_read(event);
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+
+	WARN_ON(event != cpuhw->event[event->hw.idx]);
+
+	write_pmlca(i, 0);
+	write_pmlcb(i, 0);
+	write_pmc(i, 0);
+
+	cpuhw->event[i] = NULL;
+	event->hw.idx = -1;
+
+	/*
+	 * TODO: if at least one restricted event exists, and we
+	 * just freed up a non-restricted-capable counter, and
+	 * there is a restricted-capable counter occupied by
+	 * a non-restricted event, migrate that event to the
+	 * vacated counter.
+	 */
+
+	cpuhw->n_events--;
+
+ out:
+	put_cpu_var(cpu_hw_events);
+}
+
+/*
+ * Re-enable interrupts on a event after they were throttled
+ * because they were coming too fast.
+ *
+ * Context is locked on entry, but perf is not disabled.
+ */
+static void fsl_emb_pmu_unthrottle(struct perf_event *event)
+{
+	s64 val, left;
+	unsigned long flags;
+
+	if (event->hw.idx < 0 || !event->hw.sample_period)
+		return;
+	local_irq_save(flags);
+	perf_disable();
+	fsl_emb_pmu_read(event);
+	left = event->hw.sample_period;
+	event->hw.last_period = left;
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+static struct pmu fsl_emb_pmu = {
+	.enable		= fsl_emb_pmu_enable,
+	.disable	= fsl_emb_pmu_disable,
+	.read		= fsl_emb_pmu_read,
+	.unthrottle	= fsl_emb_pmu_unthrottle,
+};
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+/*
+ * Translate a generic cache event_id config to a raw event_id code.
+ */
+static int hw_perf_cache_event(u64 config, u64 *eventp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!ppmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*ppmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*eventp = ev;
+	return 0;
+}
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	u64 ev;
+	struct perf_event *events[MAX_HWEVENTS];
+	int n;
+	int err;
+	int num_restricted;
+	int i;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		ev = event->attr.config;
+		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+			return ERR_PTR(-EOPNOTSUPP);
+		ev = ppmu->generic_events[ev];
+		break;
+
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(event->attr.config, &ev);
+		if (err)
+			return ERR_PTR(err);
+		break;
+
+	case PERF_TYPE_RAW:
+		ev = event->attr.config;
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.config = ppmu->xlate_event(ev);
+	if (!(event->hw.config & FSL_EMB_EVENT_VALID))
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * If this is in a group, check if it can go on with all the
+	 * other hardware events in the group.  We assume the event
+	 * hasn't been linked into its leader's sibling list at this point.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+		                   ppmu->n_counter - 1, events);
+		if (n < 0)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (event->hw.config & FSL_EMB_EVENT_RESTRICTED) {
+		num_restricted = 0;
+		for (i = 0; i < n; i++) {
+			if (events[i]->hw.config & FSL_EMB_EVENT_RESTRICTED)
+				num_restricted++;
+		}
+
+		if (num_restricted >= ppmu->n_restricted)
+			return ERR_PTR(-EINVAL);
+	}
+
+	event->hw.idx = -1;
+
+	event->hw.config_base = PMLCA_CE | PMLCA_FCM1 |
+	                        (u32)((ev << 16) & PMLCA_EVENT_MASK);
+
+	if (event->attr.exclude_user)
+		event->hw.config_base |= PMLCA_FCU;
+	if (event->attr.exclude_kernel)
+		event->hw.config_base |= PMLCA_FCS;
+	if (event->attr.exclude_idle)
+		return ERR_PTR(-ENOTSUPP);
+
+	event->hw.last_period = event->hw.sample_period;
+	atomic64_set(&event->hw.period_left, event->hw.last_period);
+
+	/*
+	 * See if we need to reserve the PMU.
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware(perf_event_interrupt))
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+
+		mtpmr(PMRN_PMGC0, PMGC0_FAC);
+		isync();
+	}
+	event->destroy = hw_perf_event_destroy;
+
+	if (err)
+		return ERR_PTR(err);
+	return &fsl_emb_pmu;
+}
+
+/*
+ * A counter has overflowed; update its count and record
+ * things if requested.  Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+static void record_and_restart(struct perf_event *event, unsigned long val,
+			       struct pt_regs *regs, int nmi)
+{
+	u64 period = event->hw.sample_period;
+	s64 prev, delta, left;
+	int record = 0;
+
+	/* we don't have to worry about interrupts here */
+	prev = atomic64_read(&event->hw.prev_count);
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+
+	/*
+	 * See if the total period for this event has expired,
+	 * and update for the next period.
+	 */
+	val = 0;
+	left = atomic64_read(&event->hw.period_left) - delta;
+	if (period) {
+		if (left <= 0) {
+			left += period;
+			if (left <= 0)
+				left = period;
+			record = 1;
+		}
+		if (left < 0x80000000LL)
+			val = 0x80000000LL - left;
+	}
+
+	/*
+	 * Finally record data if requested.
+	 */
+	if (record) {
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, 0);
+
+		if (perf_event_overflow(event, nmi, &data, regs)) {
+			/*
+			 * Interrupts are coming too fast - throttle them
+			 * by setting the event to 0, so it will be
+			 * at least 2^30 cycles until the next interrupt
+			 * (assuming each event counts at most 2 counts
+			 * per cycle).
+			 */
+			val = 0;
+			left = ~0ULL >> 1;
+		}
+	}
+
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+}
+
+static void perf_event_interrupt(struct pt_regs *regs)
+{
+	int i;
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *event;
+	unsigned long val;
+	int found = 0;
+	int nmi;
+
+	nmi = perf_intr_is_nmi(regs);
+	if (nmi)
+		nmi_enter();
+	else
+		irq_enter();
+
+	for (i = 0; i < ppmu->n_counter; ++i) {
+		event = cpuhw->event[i];
+
+		val = read_pmc(i);
+		if ((int)val < 0) {
+			if (event) {
+				/* event has overflowed */
+				found = 1;
+				record_and_restart(event, val, regs, nmi);
+			} else {
+				/*
+				 * Disabled counter is negative,
+				 * reset it just in case.
+				 */
+				write_pmc(i, 0);
+			}
+		}
+	}
+
+	/* PMM will keep counters frozen until we return from the interrupt. */
+	mtmsr(mfmsr() | MSR_PMM);
+	mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
+	isync();
+
+	if (nmi)
+		nmi_exit();
+	else
+		irq_exit();
+}
+
+void hw_perf_event_setup(int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	memset(cpuhw, 0, sizeof(*cpuhw));
+}
+
+int register_fsl_emb_pmu(struct fsl_emb_pmu *pmu)
+{
+	if (ppmu)
+		return -EBUSY;		/* something's already registered */
+
+	ppmu = pmu;
+	pr_info("%s performance monitor hardware support registered\n",
+		pmu->name);
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c
index 0516e2d..461499b 100644
--- a/arch/powerpc/kernel/pmc.c
+++ b/arch/powerpc/kernel/pmc.c
@@ -37,7 +37,7 @@ static void dummy_perf(struct pt_regs *regs)
 }
 
 
-static DEFINE_SPINLOCK(pmc_owner_lock);
+static DEFINE_RAW_SPINLOCK(pmc_owner_lock);
 static void *pmc_owner_caller; /* mostly for debugging */
 perf_irq_t perf_irq = dummy_perf;
 
@@ -45,7 +45,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 {
 	int err = 0;
 
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	if (pmc_owner_caller) {
 		printk(KERN_WARNING "reserve_pmc_hardware: "
@@ -59,21 +59,21 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq)
 	perf_irq = new_perf_irq ? new_perf_irq : dummy_perf;
 
  out:
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 	return err;
 }
 EXPORT_SYMBOL_GPL(reserve_pmc_hardware);
 
 void release_pmc_hardware(void)
 {
-	spin_lock(&pmc_owner_lock);
+	raw_spin_lock(&pmc_owner_lock);
 
 	WARN_ON(! pmc_owner_caller);
 
 	pmc_owner_caller = NULL;
 	perf_irq = dummy_perf;
 
-	spin_unlock(&pmc_owner_lock);
+	raw_spin_unlock(&pmc_owner_lock);
 }
 EXPORT_SYMBOL_GPL(release_pmc_hardware);
 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 42545145..3b4dcc8 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -101,12 +101,17 @@ EXPORT_SYMBOL(pci_dram_offset);
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);
 
+#ifdef CONFIG_PPC_FPU
+EXPORT_SYMBOL_GPL(cvt_df);
+EXPORT_SYMBOL_GPL(cvt_fd);
+#endif
 EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_VSX
 EXPORT_SYMBOL(giveup_vsx);
+EXPORT_SYMBOL_GPL(__giveup_vsx);
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 EXPORT_SYMBOL(giveup_spe);
diff --git a/arch/powerpc/kernel/proc_powerpc.c b/arch/powerpc/kernel/proc_powerpc.c
index 1ed3b8d..c8ae371 100644
--- a/arch/powerpc/kernel/proc_powerpc.c
+++ b/arch/powerpc/kernel/proc_powerpc.c
@@ -19,7 +19,6 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/proc_fs.h>
-#include <linux/slab.h>
 #include <linux/kernel.h>
 
 #include <asm/machdep.h>
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index c930ac3..773424d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -245,6 +245,24 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+void do_send_trap(struct pt_regs *regs, unsigned long address,
+		  unsigned long error_code, int signal_code, int breakpt)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = breakpt;	/* breakpoint or watchpoint id */
+	info.si_code = signal_code;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
 void do_dabr(struct pt_regs *regs, unsigned long address,
 		    unsigned long error_code)
 {
@@ -257,12 +275,6 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	if (debugger_dabr_match(regs))
 		return;
 
-	/* Clear the DAC and struct entries.  One shot trigger */
-#if defined(CONFIG_BOOKE)
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
-							| DBCR0_IDM));
-#endif
-
 	/* Clear the DABR */
 	set_dabr(0);
 
@@ -273,9 +285,82 @@ void do_dabr(struct pt_regs *regs, unsigned long address,
 	info.si_addr = (void __user *)address;
 	force_sig_info(SIGTRAP, &info, current);
 }
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
 
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+/*
+ * Set the debug registers back to their default "safe" values.
+ */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	thread->iac1 = thread->iac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	thread->iac3 = thread->iac4 = 0;
+#endif
+	thread->dac1 = thread->dac2 = 0;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	thread->dvc1 = thread->dvc2 = 0;
+#endif
+	thread->dbcr0 = 0;
+#ifdef CONFIG_BOOKE
+	/*
+	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
+	 */
+	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |	\
+			DBCR1_IAC3US | DBCR1_IAC4US;
+	/*
+	 * Force Data Address Compare User/Supervisor bits to be User-only
+	 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
+	 */
+	thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
+#else
+	thread->dbcr1 = 0;
+#endif
+}
+
+static void prime_debug_regs(struct thread_struct *thread)
+{
+	mtspr(SPRN_IAC1, thread->iac1);
+	mtspr(SPRN_IAC2, thread->iac2);
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	mtspr(SPRN_IAC3, thread->iac3);
+	mtspr(SPRN_IAC4, thread->iac4);
+#endif
+	mtspr(SPRN_DAC1, thread->dac1);
+	mtspr(SPRN_DAC2, thread->dac2);
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+	mtspr(SPRN_DVC1, thread->dvc1);
+	mtspr(SPRN_DVC2, thread->dvc2);
+#endif
+	mtspr(SPRN_DBCR0, thread->dbcr0);
+	mtspr(SPRN_DBCR1, thread->dbcr1);
+#ifdef CONFIG_BOOKE
+	mtspr(SPRN_DBCR2, thread->dbcr2);
+#endif
+}
+/*
+ * Unless neither the old or new thread are making use of the
+ * debug registers, set the debug registers from the values
+ * stored in the new thread.
+ */
+static void switch_booke_debug_regs(struct thread_struct *new_thread)
+{
+	if ((current->thread.dbcr0 & DBCR0_IDM)
+		|| (new_thread->dbcr0 & DBCR0_IDM))
+			prime_debug_regs(new_thread);
+}
+#else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
+static void set_debug_reg_defaults(struct thread_struct *thread)
+{
+	if (thread->dabr) {
+		thread->dabr = 0;
+		set_dabr(0);
+	}
+}
+#endif	/* CONFIG_PPC_ADV_DEBUG_REGS */
+
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
@@ -284,8 +369,11 @@ int set_dabr(unsigned long dabr)
 		return ppc_md.set_dabr(dabr);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	mtspr(SPRN_DAC1, dabr);
+#ifdef CONFIG_PPC_47x
+	isync();
+#endif
 #elif defined(CONFIG_PPC_BOOK3S)
 	mtspr(SPRN_DABR, dabr);
 #endif
@@ -371,10 +459,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_BOOKE)
-	/* If new thread DAC (HW breakpoint) is the same then leave it */
-	if (new->thread.dabr)
-		set_dabr(new->thread.dabr);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	switch_booke_debug_regs(&new->thread);
 #else
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
@@ -514,7 +600,7 @@ void show_regs(struct pt_regs * regs)
 	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if (trap == 0x300 || trap == 0x600)
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr);
 #else
 		printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
@@ -554,28 +640,9 @@ void exit_thread(void)
 
 void flush_thread(void)
 {
-#ifdef CONFIG_PPC64
-	struct thread_info *t = current_thread_info();
-
-	if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
-		clear_ti_thread_flag(t, TIF_ABI_PENDING);
-		if (test_ti_thread_flag(t, TIF_32BIT))
-			clear_ti_thread_flag(t, TIF_32BIT);
-		else
-			set_ti_thread_flag(t, TIF_32BIT);
-	}
-#endif
-
 	discard_lazy_cpu_state();
 
-	if (current->thread.dabr) {
-		current->thread.dabr = 0;
-		set_dabr(0);
-
-#if defined(CONFIG_BOOKE)
-		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
-#endif
-	}
+	set_debug_reg_defaults(&current->thread);
 }
 
 void
@@ -938,7 +1005,6 @@ out:
 	return error;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 				  unsigned long nbytes)
 {
@@ -963,10 +1029,6 @@ static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 	return 0;
 }
 
-#else
-#define valid_irq_stack(sp, p, nb)	0
-#endif /* CONFIG_IRQSTACKS */
-
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4ec3008..fed9bf6 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,7 +31,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -43,6 +43,7 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/mmu.h>
+#include <asm/paca.h>
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
@@ -61,365 +62,12 @@
 #define DBG(fmt...)
 #endif
 
-
-static int __initdata dt_root_addr_cells;
-static int __initdata dt_root_size_cells;
-
 #ifdef CONFIG_PPC64
 int __initdata iommu_is_off;
 int __initdata iommu_force_on;
 unsigned long tce_alloc_start, tce_alloc_end;
 #endif
 
-typedef u32 cell_t;
-
-#if 0
-static struct boot_param_header *initial_boot_params __initdata;
-#else
-struct boot_param_header *initial_boot_params;
-#endif
-
-extern struct device_node *allnodes;	/* temporary while merging */
-
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
-/* export that to outside world */
-struct device_node *of_chosen;
-
-static inline char *find_flat_dt_string(u32 offset)
-{
-	return ((char *)initial_boot_params) +
-		initial_boot_params->off_dt_strings + offset;
-}
-
-/**
- * This function is used to scan the flattened device-tree, it is
- * used to extract the memory informations at boot before we can
- * unflatten the tree
- */
-int __init of_scan_flat_dt(int (*it)(unsigned long node,
-				     const char *uname, int depth,
-				     void *data),
-			   void *data)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	int rc = 0;
-	int depth = -1;
-
-	do {
-		u32 tag = *((u32 *)p);
-		char *pathp;
-		
-		p += 4;
-		if (tag == OF_DT_END_NODE) {
-			depth --;
-			continue;
-		}
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag == OF_DT_END)
-			break;
-		if (tag == OF_DT_PROP) {
-			u32 sz = *((u32 *)p);
-			p += 8;
-			if (initial_boot_params->version < 0x10)
-				p = _ALIGN(p, sz >= 8 ? 8 : 4);
-			p += sz;
-			p = _ALIGN(p, 4);
-			continue;
-		}
-		if (tag != OF_DT_BEGIN_NODE) {
-			printk(KERN_WARNING "Invalid tag %x scanning flattened"
-			       " device tree !\n", tag);
-			return -EINVAL;
-		}
-		depth++;
-		pathp = (char *)p;
-		p = _ALIGN(p + strlen(pathp) + 1, 4);
-		if ((*pathp) == '/') {
-			char *lp, *np;
-			for (lp = NULL, np = pathp; *np; np++)
-				if ((*np) == '/')
-					lp = np+1;
-			if (lp != NULL)
-				pathp = lp;
-		}
-		rc = it(p, pathp, depth, data);
-		if (rc != 0)
-			break;		
-	} while(1);
-
-	return rc;
-}
-
-unsigned long __init of_get_flat_dt_root(void)
-{
-	unsigned long p = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-
-	while(*((u32 *)p) == OF_DT_NOP)
-		p += 4;
-	BUG_ON (*((u32 *)p) != OF_DT_BEGIN_NODE);
-	p += 4;
-	return _ALIGN(p + strlen((char *)p) + 1, 4);
-}
-
-/**
- * This  function can be used within scan_flattened_dt callback to get
- * access to properties
- */
-void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-				 unsigned long *size)
-{
-	unsigned long p = node;
-
-	do {
-		u32 tag = *((u32 *)p);
-		u32 sz, noff;
-		const char *nstr;
-
-		p += 4;
-		if (tag == OF_DT_NOP)
-			continue;
-		if (tag != OF_DT_PROP)
-			return NULL;
-
-		sz = *((u32 *)p);
-		noff = *((u32 *)(p + 4));
-		p += 8;
-		if (initial_boot_params->version < 0x10)
-			p = _ALIGN(p, sz >= 8 ? 8 : 4);
-
-		nstr = find_flat_dt_string(noff);
-		if (nstr == NULL) {
-			printk(KERN_WARNING "Can't find property index"
-			       " name !\n");
-			return NULL;
-		}
-		if (strcmp(name, nstr) == 0) {
-			if (size)
-				*size = sz;
-			return (void *)p;
-		}
-		p += sz;
-		p = _ALIGN(p, 4);
-	} while(1);
-}
-
-int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
-{
-	const char* cp;
-	unsigned long cplen, l;
-
-	cp = of_get_flat_dt_prop(node, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
-				       unsigned long align)
-{
-	void *res;
-
-	*mem = _ALIGN(*mem, align);
-	res = (void *)*mem;
-	*mem += size;
-
-	return res;
-}
-
-static unsigned long __init unflatten_dt_node(unsigned long mem,
-					      unsigned long *p,
-					      struct device_node *dad,
-					      struct device_node ***allnextpp,
-					      unsigned long fpsize)
-{
-	struct device_node *np;
-	struct property *pp, **prev_pp = NULL;
-	char *pathp;
-	u32 tag;
-	unsigned int l, allocl;
-	int has_name = 0;
-	int new_format = 0;
-
-	tag = *((u32 *)(*p));
-	if (tag != OF_DT_BEGIN_NODE) {
-		printk("Weird tag at start of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	pathp = (char *)*p;
-	l = allocl = strlen(pathp) + 1;
-	*p = _ALIGN(*p + l, 4);
-
-	/* version 0x10 has a more compact unit name here instead of the full
-	 * path. we accumulate the full path size using "fpsize", we'll rebuild
-	 * it later. We detect this because the first character of the name is
-	 * not '/'.
-	 */
-	if ((*pathp) != '/') {
-		new_format = 1;
-		if (fpsize == 0) {
-			/* root node: special case. fpsize accounts for path
-			 * plus terminating zero. root node only has '/', so
-			 * fpsize should be 2, but we want to avoid the first
-			 * level nodes to have two '/' so we use fpsize 1 here
-			 */
-			fpsize = 1;
-			allocl = 2;
-		} else {
-			/* account for '/' and path size minus terminal 0
-			 * already in 'l'
-			 */
-			fpsize += l;
-			allocl = fpsize;
-		}
-	}
-
-
-	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
-				__alignof__(struct device_node));
-	if (allnextpp) {
-		memset(np, 0, sizeof(*np));
-		np->full_name = ((char*)np) + sizeof(struct device_node);
-		if (new_format) {
-			char *p = np->full_name;
-			/* rebuild full path for new format */
-			if (dad && dad->parent) {
-				strcpy(p, dad->full_name);
-#ifdef DEBUG
-				if ((strlen(p) + l + 1) != allocl) {
-					DBG("%s: p: %d, l: %d, a: %d\n",
-					    pathp, (int)strlen(p), l, allocl);
-				}
-#endif
-				p += strlen(p);
-			}
-			*(p++) = '/';
-			memcpy(p, pathp, l);
-		} else
-			memcpy(np->full_name, pathp, l);
-		prev_pp = &np->properties;
-		**allnextpp = np;
-		*allnextpp = &np->allnext;
-		if (dad != NULL) {
-			np->parent = dad;
-			/* we temporarily use the next field as `last_child'*/
-			if (dad->next == 0)
-				dad->child = np;
-			else
-				dad->next->sibling = np;
-			dad->next = np;
-		}
-		kref_init(&np->kref);
-	}
-	while(1) {
-		u32 sz, noff;
-		char *pname;
-
-		tag = *((u32 *)(*p));
-		if (tag == OF_DT_NOP) {
-			*p += 4;
-			continue;
-		}
-		if (tag != OF_DT_PROP)
-			break;
-		*p += 4;
-		sz = *((u32 *)(*p));
-		noff = *((u32 *)((*p) + 4));
-		*p += 8;
-		if (initial_boot_params->version < 0x10)
-			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
-
-		pname = find_flat_dt_string(noff);
-		if (pname == NULL) {
-			printk("Can't find property name in list !\n");
-			break;
-		}
-		if (strcmp(pname, "name") == 0)
-			has_name = 1;
-		l = strlen(pname) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
-					__alignof__(struct property));
-		if (allnextpp) {
-			if (strcmp(pname, "linux,phandle") == 0) {
-				np->node = *((u32 *)*p);
-				if (np->linux_phandle == 0)
-					np->linux_phandle = np->node;
-			}
-			if (strcmp(pname, "ibm,phandle") == 0)
-				np->linux_phandle = *((u32 *)*p);
-			pp->name = pname;
-			pp->length = sz;
-			pp->value = (void *)*p;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-		}
-		*p = _ALIGN((*p) + sz, 4);
-	}
-	/* with version 0x10 we may not have the name property, recreate
-	 * it here from the unit name if absent
-	 */
-	if (!has_name) {
-		char *p = pathp, *ps = pathp, *pa = NULL;
-		int sz;
-
-		while (*p) {
-			if ((*p) == '@')
-				pa = p;
-			if ((*p) == '/')
-				ps = p + 1;
-			p++;
-		}
-		if (pa < ps)
-			pa = p;
-		sz = (pa - ps) + 1;
-		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
-					__alignof__(struct property));
-		if (allnextpp) {
-			pp->name = "name";
-			pp->length = sz;
-			pp->value = pp + 1;
-			*prev_pp = pp;
-			prev_pp = &pp->next;
-			memcpy(pp->value, ps, sz - 1);
-			((char *)pp->value)[sz - 1] = 0;
-			DBG("fixed up name for %s -> %s\n", pathp,
-				(char *)pp->value);
-		}
-	}
-	if (allnextpp) {
-		*prev_pp = NULL;
-		np->name = of_get_property(np, "name", NULL);
-		np->type = of_get_property(np, "device_type", NULL);
-
-		if (!np->name)
-			np->name = "<NULL>";
-		if (!np->type)
-			np->type = "<NULL>";
-	}
-	while (tag == OF_DT_BEGIN_NODE) {
-		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
-		tag = *((u32 *)(*p));
-	}
-	if (tag != OF_DT_END_NODE) {
-		printk("Weird tag at end of node: %x\n", tag);
-		return mem;
-	}
-	*p += 4;
-	return mem;
-}
-
 static int __init early_parse_mem(char *p)
 {
 	if (!p)
@@ -446,11 +94,11 @@ static void __init move_device_tree(void)
 	DBG("-> move_device_tree\n");
 
 	start = __pa(initial_boot_params);
-	size = initial_boot_params->totalsize;
+	size = be32_to_cpu(initial_boot_params->totalsize);
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
-		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = (struct boot_param_header *)p;
 		DBG("Moved device tree to 0x%p\n", p);
@@ -459,54 +107,6 @@ static void __init move_device_tree(void)
 	DBG("<- move_device_tree\n");
 }
 
-/**
- * unflattens the device-tree passed by the firmware, creating the
- * tree of struct device_node. It also fills the "name" and "type"
- * pointers of the nodes so the normal device-tree walking functions
- * can be used (this used to be done by finish_device_tree)
- */
-void __init unflatten_device_tree(void)
-{
-	unsigned long start, mem, size;
-	struct device_node **allnextp = &allnodes;
-
-	DBG(" -> unflatten_device_tree()\n");
-
-	/* First pass, scan for size */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	size = unflatten_dt_node(0, &start, NULL, NULL, 0);
-	size = (size | 3) + 1;
-
-	DBG("  size is %lx, allocating...\n", size);
-
-	/* Allocate memory for the expanded device tree */
-	mem = lmb_alloc(size + 4, __alignof__(struct device_node));
-	mem = (unsigned long) __va(mem);
-
-	((u32 *)mem)[size / 4] = 0xdeadbeef;
-
-	DBG("  unflattening %lx...\n", mem);
-
-	/* Second pass, do actual unflattening */
-	start = ((unsigned long)initial_boot_params) +
-		initial_boot_params->off_dt_struct;
-	unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
-	if (*((u32 *)start) != OF_DT_END)
-		printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start));
-	if (((u32 *)mem)[size / 4] != 0xdeadbeef)
-		printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
-		       ((u32 *)mem)[size / 4] );
-	*allnextp = NULL;
-
-	/* Get pointer to OF "/chosen" node for use everywhere */
-	of_chosen = of_find_node_by_path("/chosen");
-	if (of_chosen == NULL)
-		of_chosen = of_find_node_by_path("/chosen@0");
-
-	DBG(" <- unflatten_device_tree()\n");
-}
-
 /*
  * ibm,pa-features is a per-cpu property that contains a string of
  * attribute descriptors, each of which has a 2 byte header plus up
@@ -763,48 +363,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 	return 0;
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init early_init_dt_check_for_initrd(unsigned long node)
-{
-	unsigned long l;
-	u32 *prop;
-
-	DBG("Looking for initrd properties... ");
-
-	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
-	if (prop) {
-		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
-
-		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
-		if (prop) {
-			initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, l/4));
-			initrd_below_start_ok = 1;
-		} else {
-			initrd_start = 0;
-		}
-	}
-
-	DBG("initrd_start=0x%lx  initrd_end=0x%lx\n", initrd_start, initrd_end);
-}
-#else
-static inline void early_init_dt_check_for_initrd(unsigned long node)
-{
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-static int __init early_init_dt_scan_chosen(unsigned long node,
-					    const char *uname, int depth, void *data)
+void __init early_init_dt_scan_chosen_arch(unsigned long node)
 {
 	unsigned long *lprop;
-	unsigned long l;
-	char *p;
-
-	DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
-	if (depth != 1 ||
-	    (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
-		return 0;
 
 #ifdef CONFIG_PPC64
 	/* check if iommu is forced on or off */
@@ -815,17 +376,17 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 #endif
 
 	/* mem=x on the command line is the preferred mechanism */
- 	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
- 	if (lprop)
- 		memory_limit = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+	if (lprop)
+		memory_limit = *lprop;
 
 #ifdef CONFIG_PPC64
- 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
- 	if (lprop)
- 		tce_alloc_start = *lprop;
- 	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
- 	if (lprop)
- 		tce_alloc_end = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+	if (lprop)
+		tce_alloc_start = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+	if (lprop)
+		tce_alloc_end = *lprop;
 #endif
 
 #ifdef CONFIG_KEXEC
@@ -837,51 +398,6 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 	if (lprop)
 		crashk_res.end = crashk_res.start + *lprop - 1;
 #endif
-
-	early_init_dt_check_for_initrd(node);
-
-	/* Retreive command line */
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
-		strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
-
-#ifdef CONFIG_CMDLINE
-	if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
-		strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif /* CONFIG_CMDLINE */
-
-	DBG("Command line is: %s\n", cmd_line);
-
-	/* break now */
-	return 1;
-}
-
-static int __init early_init_dt_scan_root(unsigned long node,
-					  const char *uname, int depth, void *data)
-{
-	u32 *prop;
-
-	if (depth != 0)
-		return 0;
-
-	prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
-	dt_root_size_cells = (prop == NULL) ? 1 : *prop;
-	DBG("dt_root_size_cells = %x\n", dt_root_size_cells);
-
-	prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
-	dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
-	DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells);
-	
-	/* break now */
-	return 1;
-}
-
-static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
-{
-	cell_t *p = *cellp;
-
-	*cellp = p + s;
-	return of_read_number(p, s);
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -893,22 +409,22 @@ static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
  */
 static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
-	cell_t *dm, *ls, *usm;
+	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
-	u64 base, size, lmb_size;
+	u64 base, size, memblock_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
-	if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
-	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
-	if (dm == NULL || l < sizeof(cell_t))
+	if (dm == NULL || l < sizeof(__be32))
 		return 0;
 
 	n = *dm++;	/* number of entries */
-	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
 		return 0;
 
 	/* check if this is a kexec/kdump kernel. */
@@ -926,11 +442,11 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 		   or if the block is not assigned to this partition (0x8) */
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
-		size = lmb_size;
+		size = memblock_size;
 		rngs = 1;
 		if (is_kexec_kdump) {
 			/*
-			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * For each memblock in ibm,dynamic-memory, a corresponding
 			 * entry in linux,drconf-usable-memory property contains
 			 * a counter 'p' followed by 'p' (base, size) duple.
 			 * Now read the counter from
@@ -953,75 +469,57 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 				if ((base + size) > 0x80000000ul)
 					size = 0x80000000ul - base;
 			}
-			lmb_add(base, size);
+			memblock_add(base, size);
 		} while (--rngs);
 	}
-	lmb_dump_all();
+	memblock_dump_all();
 	return 0;
 }
 #else
 #define early_init_dt_scan_drconf_memory(node)	0
 #endif /* CONFIG_PPC_PSERIES */
 
-static int __init early_init_dt_scan_memory(unsigned long node,
-					    const char *uname, int depth, void *data)
+static int __init early_init_dt_scan_memory_ppc(unsigned long node,
+						const char *uname,
+						int depth, void *data)
 {
-	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	cell_t *reg, *endp;
-	unsigned long l;
-
-	/* Look for the ibm,dynamic-reconfiguration-memory node */
 	if (depth == 1 &&
 	    strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
 		return early_init_dt_scan_drconf_memory(node);
+	
+	return early_init_dt_scan_memory(node, uname, depth, data);
+}
 
-	/* We are scanning "memory" nodes only */
-	if (type == NULL) {
-		/*
-		 * The longtrail doesn't have a device_type on the
-		 * /memory node, so look for the node called /memory@0.
-		 */
-		if (depth != 1 || strcmp(uname, "memory@0") != 0)
-			return 0;
-	} else if (strcmp(type, "memory") != 0)
-		return 0;
-
-	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
-	if (reg == NULL)
-		reg = of_get_flat_dt_prop(node, "reg", &l);
-	if (reg == NULL)
-		return 0;
-
-	endp = reg + (l / sizeof(cell_t));
-
-	DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
-	    uname, l, reg[0], reg[1], reg[2], reg[3]);
-
-	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
-		u64 base, size;
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+#if defined(CONFIG_PPC64)
+	if (iommu_is_off) {
+		if (base >= 0x80000000ul)
+			return;
+		if ((base + size) > 0x80000000ul)
+			size = 0x80000000ul - base;
+	}
+#endif
 
-		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
-		size = dt_mem_next_cell(dt_root_size_cells, &reg);
+	memblock_add(base, size);
 
-		if (size == 0)
-			continue;
-		DBG(" - %llx ,  %llx\n", (unsigned long long)base,
-		    (unsigned long long)size);
-#ifdef CONFIG_PPC64
-		if (iommu_is_off) {
-			if (base >= 0x80000000ul)
-				continue;
-			if ((base + size) > 0x80000000ul)
-				size = 0x80000000ul - base;
-		}
-#endif
-		lmb_add(base, size);
+	memstart_addr = min((u64)memstart_addr, base);
+}
 
-		memstart_addr = min((u64)memstart_addr, base);
-	}
+u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return memblock_alloc(size, align);
+}
 
-	return 0;
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+		unsigned long end)
+{
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
 }
+#endif
 
 static void __init early_reserve_mem(void)
 {
@@ -1036,12 +534,12 @@ static void __init early_reserve_mem(void)
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
 	self_size = initial_boot_params->totalsize;
-	lmb_reserve(self_base, self_size);
+	memblock_reserve(self_base, self_size);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* then reserve the initrd, if any */
 	if (initrd_start && (initrd_end > initrd_start))
-		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -1062,7 +560,7 @@ static void __init early_reserve_mem(void)
 			if (base_32 == self_base && size_32 == self_size)
 				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
-			lmb_reserve(base_32, size_32);
+			memblock_reserve(base_32, size_32);
 		}
 		return;
 	}
@@ -1073,7 +571,7 @@ static void __init early_reserve_mem(void)
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 	}
 }
 
@@ -1096,7 +594,7 @@ static inline unsigned long phyp_dump_calculate_reserve_size(void)
 		return phyp_dump_info->reserve_bootvar;
 
 	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
+	tmp = memblock_end_of_DRAM();
 	do_div(tmp, 20);
 
 	/* round it down in multiples of 256 */
@@ -1135,11 +633,11 @@ static void __init phyp_dump_reserve_mem(void)
 	if (phyp_dump_info->phyp_dump_is_active) {
 		/* Reserve *everything* above RMR.Area freed by userland tools*/
 		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
+		size = memblock_end_of_DRAM() - base;
 
 		/* XXX crashed_ram_end is wrong, since it may be beyond
 		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
@@ -1147,8 +645,8 @@ static void __init phyp_dump_reserve_mem(void)
 		size = phyp_dump_info->cpu_state_size +
 			phyp_dump_info->hpte_region_size +
 			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
 	}
@@ -1183,20 +681,20 @@ void __init early_init_devtree(void *params)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
 	/* Save command line for /proc/cmdline and then parse parameters */
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
-	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
 	if (PHYSICAL_START > MEMORY_START)
-		lmb_reserve(MEMORY_START, 0x8000);
+		memblock_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
@@ -1208,22 +706,24 @@ void __init early_init_devtree(void *params)
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
-		lmb_analyze();
-		memsize = lmb_phys_mem_size();
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
 		if ((memsize & PAGE_MASK) != memsize)
 			limit = memsize & PAGE_MASK;
 	}
-	lmb_enforce_memory_limit(limit);
+	memblock_enforce_memory_limit(limit);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
 	move_device_tree();
 
+	allocate_pacas();
+
 	DBG("Scanning CPUs ...\n");
 
 	/* Retreive CPU related informations from the flat tree
@@ -1234,25 +734,6 @@ void __init early_init_devtree(void *params)
 	DBG(" <- early_init_devtree()\n");
 }
 
-
-/**
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int machine_is_compatible(const char *compat)
-{
-	struct device_node *root;
-	int rc = 0;
-
-	root = of_find_node_by_path("/");
-	if (root) {
-		rc = of_device_is_compatible(root, compat);
-		of_node_put(root);
-	}
-	return rc;
-}
-EXPORT_SYMBOL(machine_is_compatible);
-
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted
@@ -1265,27 +746,6 @@ EXPORT_SYMBOL(machine_is_compatible);
  *******/
 
 /**
- *	of_find_node_by_phandle - Find a node given a phandle
- *	@handle:	phandle of the node to find
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->linux_phandle == handle)
-			break;
-	of_node_get(np);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-/**
  *	of_find_next_cache_node - Find a node's subsidiary cache
  *	@np:	node of type "cpu" or "cache"
  *
@@ -1316,138 +776,6 @@ struct device_node *of_find_next_cache_node(struct device_node *np)
 	return NULL;
 }
 
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns node.
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	if (node)
-		kref_get(&node->kref);
-	return node;
-}
-EXPORT_SYMBOL(of_node_get);
-
-static inline struct device_node * kref_to_device_node(struct kref *kref)
-{
-	return container_of(kref, struct device_node, kref);
-}
-
-/**
- *	of_node_release - release a dynamically allocated node
- *	@kref:  kref element of the node to be released
- *
- *	In of_node_put() this function is passed to kref_put()
- *	as the destructor.
- */
-static void of_node_release(struct kref *kref)
-{
-	struct device_node *node = kref_to_device_node(kref);
-	struct property *prop = node->properties;
-
-	/* We should never be releasing nodes that haven't been detached. */
-	if (!of_node_check_flag(node, OF_DETACHED)) {
-		printk("WARNING: Bad of_node_put() on %s\n", node->full_name);
-		dump_stack();
-		kref_init(&node->kref);
-		return;
-	}
-
-	if (!of_node_check_flag(node, OF_DYNAMIC))
-		return;
-
-	while (prop) {
-		struct property *next = prop->next;
-		kfree(prop->name);
-		kfree(prop->value);
-		kfree(prop);
-		prop = next;
-
-		if (!prop) {
-			prop = node->deadprops;
-			node->deadprops = NULL;
-		}
-	}
-	kfree(node->full_name);
-	kfree(node->data);
-	kfree(node);
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- */
-void of_node_put(struct device_node *node)
-{
-	if (node)
-		kref_put(&node->kref, of_node_release);
-}
-EXPORT_SYMBOL(of_node_put);
-
-/*
- * Plug a device node into the tree and global list.
- */
-void of_attach_node(struct device_node *np)
-{
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	np->sibling = np->parent->child;
-	np->allnext = allnodes;
-	np->parent->child = np;
-	allnodes = np;
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
-/*
- * "Unplug" a node from the device tree.  The caller must hold
- * a reference to the node.  The memory associated with the node
- * is not freed until its refcount goes to zero.
- */
-void of_detach_node(struct device_node *np)
-{
-	struct device_node *parent;
-	unsigned long flags;
-
-	write_lock_irqsave(&devtree_lock, flags);
-
-	parent = np->parent;
-	if (!parent)
-		goto out_unlock;
-
-	if (allnodes == np)
-		allnodes = np->allnext;
-	else {
-		struct device_node *prev;
-		for (prev = allnodes;
-		     prev->allnext != np;
-		     prev = prev->allnext)
-			;
-		prev->allnext = np->allnext;
-	}
-
-	if (parent->child == np)
-		parent->child = np->sibling;
-	else {
-		struct device_node *prevsib;
-		for (prevsib = np->parent->child;
-		     prevsib->sibling != np;
-		     prevsib = prevsib->sibling)
-			;
-		prevsib->sibling = np->sibling;
-	}
-
-	of_node_set_flag(np, OF_DETACHED);
-
-out_unlock:
-	write_unlock_irqrestore(&devtree_lock, flags);
-}
-
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
@@ -1479,9 +807,9 @@ static int of_finish_dynamic_node(struct device_node *node)
 	if (machine_is(powermac))
 		return -ENODEV;
 
-	/* fix up new node's linux_phandle field */
+	/* fix up new node's phandle field */
 	if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
-		node->linux_phandle = *ibm_phandle;
+		node->phandle = *ibm_phandle;
 
 out:
 	of_node_put(parent);
@@ -1520,120 +848,6 @@ static int __init prom_reconfig_setup(void)
 __initcall(prom_reconfig_setup);
 #endif
 
-/*
- * Add a property to a node
- */
-int prom_add_property(struct device_node* np, struct property* prop)
-{
-	struct property **next;
-	unsigned long flags;
-
-	prop->next = NULL;	
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (strcmp(prop->name, (*next)->name) == 0) {
-			/* duplicate ! don't insert it */
-			write_unlock_irqrestore(&devtree_lock, flags);
-			return -1;
-		}
-		next = &(*next)->next;
-	}
-	*next = prop;
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_add_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Remove a property from a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, so it won't be found any more.
- */
-int prom_remove_property(struct device_node *np, struct property *prop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == prop) {
-			/* found the node */
-			*next = prop->next;
-			prop->next = np->deadprops;
-			np->deadprops = prop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to remove the proc node as well */
-	if (np->pde)
-		proc_device_tree_remove_prop(np->pde, prop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-/*
- * Update a property in a node.  Note that we don't actually
- * remove it, since we have given out who-knows-how-many pointers
- * to the data using get-property.  Instead we just move the property
- * to the "dead properties" list, and add the new property to the
- * property list
- */
-int prom_update_property(struct device_node *np,
-			 struct property *newprop,
-			 struct property *oldprop)
-{
-	struct property **next;
-	unsigned long flags;
-	int found = 0;
-
-	write_lock_irqsave(&devtree_lock, flags);
-	next = &np->properties;
-	while (*next) {
-		if (*next == oldprop) {
-			/* found the node */
-			newprop->next = oldprop->next;
-			*next = newprop;
-			oldprop->next = np->deadprops;
-			np->deadprops = oldprop;
-			found = 1;
-			break;
-		}
-		next = &(*next)->next;
-	}
-	write_unlock_irqrestore(&devtree_lock, flags);
-
-	if (!found)
-		return -ENODEV;
-
-#ifdef CONFIG_PROC_DEVICETREE
-	/* try to add to proc as well if it was initialized */
-	if (np->pde)
-		proc_device_tree_update_prop(np->pde, newprop, oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-	return 0;
-}
-
-
 /* Find the device node for a given logical cpu number, also returns the cpu
  * local thread number (index in ibm,interrupt-server#s) if relevant and
  * asked for (non NULL)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index bafac2e..3b6f8ae 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -653,6 +653,10 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_CMO			0x00
 #endif
+#define OV5_TYPE1_AFFINITY	0x80	/* Type 1 NUMA affinity */
+
+/* Option Vector 6: IBM PAPR hints */
+#define OV6_LINUX		0x02	/* Linux is our OS */
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -665,7 +669,7 @@ static unsigned char ibm_architecture_vec[] = {
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
-	5 - 1,				/* 5 option vectors */
+	6 - 1,				/* 6 option vectors */
 
 	/* option vector 1: processor architectures supported */
 	3 - 2,				/* length */
@@ -697,12 +701,29 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	5 - 2,				/* length */
+	13 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
 	0,
 	OV5_CMO,
+	OV5_TYPE1_AFFINITY,
+	0,
+	0,
+	0,
+	/* WARNING: The offset of the "number of cores" field below
+	 * must match by the macro below. Update the definition if
+	 * the structure layout changes.
+	 */
+#define IBM_ARCH_VEC_NRCORES_OFFSET	100
+	W(NR_CPUS),			/* number of cores supported */
+
+	/* option vector 6: IBM PAPR hints */
+	4 - 2,				/* length */
+	0,
+	0,
+	OV6_LINUX,
+
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -792,13 +813,70 @@ static struct fake_elf {
 	}
 };
 
+static int __init prom_count_smt_threads(void)
+{
+	phandle node;
+	char type[64];
+	unsigned int plen;
+
+	/* Pick up th first CPU node we can find */
+	for (node = 0; prom_next_node(&node); ) {
+		type[0] = 0;
+		prom_getprop(node, "device_type", type, sizeof(type));
+
+		if (strcmp(type, RELOC("cpu")))
+			continue;
+		/*
+		 * There is an entry for each smt thread, each entry being
+		 * 4 bytes long.  All cpus should have the same number of
+		 * smt threads, so return after finding the first.
+		 */
+		plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s");
+		if (plen == PROM_ERROR)
+			break;
+		plen >>= 2;
+		prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen);
+
+		/* Sanity check */
+		if (plen < 1 || plen > 64) {
+			prom_printf("Threads per core 0x%x out of bounds, assuming 1\n",
+				    (unsigned long)plen);
+			return 1;
+		}
+		return plen;
+	}
+	prom_debug("No threads found, assuming 1 per core\n");
+
+	return 1;
+
+}
+
+
 static void __init prom_send_capabilities(void)
 {
 	ihandle elfloader, root;
 	prom_arg_t ret;
+	u32 *cores;
 
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
+		/* We need to tell the FW about the number of cores we support.
+		 *
+		 * To do that, we count the number of threads on the first core
+		 * (we assume this is the same for all cores) and use it to
+		 * divide NR_CPUS.
+		 */
+		cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]);
+		if (*cores != NR_CPUS) {
+			prom_printf("WARNING ! "
+				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
+				    *cores);
+		} else {
+			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
+			prom_printf("Max number of cores passed to firmware: 0x%x\n",
+				    (unsigned long)*cores);
+		}
+
 		/* try calling the ibm,client-architecture-support method */
 		prom_printf("Calling ibm,client-architecture-support...");
 		if (call_prom_ret("call-method", 3, 2, &ret,
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 1ac136b..9f82f49 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -52,12 +52,18 @@ do
 	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
 		OK=1
 	fi
 	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
 		OK=1
 	fi
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index ef14988..7a0c0199 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -39,6 +39,109 @@
 #include <asm/system.h>
 
 /*
+ * The parameter save area on the stack is used to store arguments being passed
+ * to callee function and is located at fixed offset from stack pointer.
+ */
+#ifdef CONFIG_PPC32
+#define PARAMETER_SAVE_AREA_OFFSET	24  /* bytes */
+#else /* CONFIG_PPC32 */
+#define PARAMETER_SAVE_AREA_OFFSET	48  /* bytes */
+#endif
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define STR(s)	#s			/* convert to string */
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define GPR_OFFSET_NAME(num)	\
+	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	GPR_OFFSET_NAME(0),
+	GPR_OFFSET_NAME(1),
+	GPR_OFFSET_NAME(2),
+	GPR_OFFSET_NAME(3),
+	GPR_OFFSET_NAME(4),
+	GPR_OFFSET_NAME(5),
+	GPR_OFFSET_NAME(6),
+	GPR_OFFSET_NAME(7),
+	GPR_OFFSET_NAME(8),
+	GPR_OFFSET_NAME(9),
+	GPR_OFFSET_NAME(10),
+	GPR_OFFSET_NAME(11),
+	GPR_OFFSET_NAME(12),
+	GPR_OFFSET_NAME(13),
+	GPR_OFFSET_NAME(14),
+	GPR_OFFSET_NAME(15),
+	GPR_OFFSET_NAME(16),
+	GPR_OFFSET_NAME(17),
+	GPR_OFFSET_NAME(18),
+	GPR_OFFSET_NAME(19),
+	GPR_OFFSET_NAME(20),
+	GPR_OFFSET_NAME(21),
+	GPR_OFFSET_NAME(22),
+	GPR_OFFSET_NAME(23),
+	GPR_OFFSET_NAME(24),
+	GPR_OFFSET_NAME(25),
+	GPR_OFFSET_NAME(26),
+	GPR_OFFSET_NAME(27),
+	GPR_OFFSET_NAME(28),
+	GPR_OFFSET_NAME(29),
+	GPR_OFFSET_NAME(30),
+	GPR_OFFSET_NAME(31),
+	REG_OFFSET_NAME(nip),
+	REG_OFFSET_NAME(msr),
+	REG_OFFSET_NAME(ctr),
+	REG_OFFSET_NAME(link),
+	REG_OFFSET_NAME(xer),
+	REG_OFFSET_NAME(ccr),
+#ifdef CONFIG_PPC64
+	REG_OFFSET_NAME(softe),
+#else
+	REG_OFFSET_NAME(mq),
+#endif
+	REG_OFFSET_NAME(trap),
+	REG_OFFSET_NAME(dar),
+	REG_OFFSET_NAME(dsisr),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
@@ -46,7 +149,7 @@
 /*
  * Set of msr bits that gdb can change on behalf of a process.
  */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 #define MSR_DEBUGCHANGE	0
 #else
 #define MSR_DEBUGCHANGE	(MSR_SE | MSR_BE)
@@ -703,7 +806,7 @@ void user_enable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		task->thread.dbcr0 &= ~DBCR0_BT;
 		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
@@ -720,7 +823,7 @@ void user_enable_block_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 		task->thread.dbcr0 &= ~DBCR0_IC;
 		task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
 		regs->msr |= MSR_DE;
@@ -737,17 +840,25 @@ void user_disable_single_step(struct task_struct *task)
 	struct pt_regs *regs = task->thread.regs;
 
 	if (regs != NULL) {
-#if defined(CONFIG_BOOKE)
-		/* If DAC don't clear DBCRO_IDM or MSR_DE */
-		if (task->thread.dabr)
-			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
-		else {
-			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		/*
+		 * The logic to disable single stepping should be as
+		 * simple as turning off the Instruction Complete flag.
+		 * And, after doing so, if all debug flags are off, turn
+		 * off DBCR0(IDM) and MSR(DE) .... Torez
+		 */
+		task->thread.dbcr0 &= ~DBCR0_IC;
+		/*
+		 * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set.
+		 */
+		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
+					task->thread.dbcr1)) {
+			/*
+			 * All debug events were off.....
+			 */
+			task->thread.dbcr0 &= ~DBCR0_IDM;
 			regs->msr &= ~MSR_DE;
 		}
-#elif defined(CONFIG_40x)
-		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
-		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~(MSR_SE | MSR_BE);
 #endif
@@ -769,8 +880,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-#ifndef CONFIG_BOOKE
-
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
 	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
 	 *  It was assumed, on previous implementations, that 3 bits were
 	 *  passed together with the data address, fitting the design of the
@@ -789,21 +899,22 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Move contents to the DABR register */
 	task->thread.dabr = data;
-
-#endif
-#if defined(CONFIG_BOOKE)
-
+#else /* CONFIG_PPC_ADV_DEBUG_REGS */
 	/* As described above, it was assumed 3 bits were passed with the data
 	 *  address, but we will assume only the mode bits will be passed
 	 *  as to not cause alignment restrictions for DAC-based processors.
 	 */
 
 	/* DAC's hold the whole address without any mode flags */
-	task->thread.dabr = data & ~0x3UL;
-
-	if (task->thread.dabr == 0) {
-		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
-		task->thread.regs->msr &= ~MSR_DE;
+	task->thread.dac1 = data & ~0x3UL;
+
+	if (task->thread.dac1 == 0) {
+		dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+		if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0,
+					task->thread.dbcr1)) {
+			task->thread.regs->msr &= ~MSR_DE;
+			task->thread.dbcr0 &= ~DBCR0_IDM;
+		}
 		return 0;
 	}
 
@@ -814,17 +925,17 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 
 	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
 	   register */
-	task->thread.dbcr0 = DBCR0_IDM;
+	task->thread.dbcr0 |= DBCR0_IDM;
 
 	/* Check for write and read flags and set DBCR0
 	   accordingly */
+	dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W);
 	if (data & 0x1UL)
-		task->thread.dbcr0 |= DBSR_DAC1R;
+		dbcr_dac(task) |= DBCR_DAC1R;
 	if (data & 0x2UL)
-		task->thread.dbcr0 |= DBSR_DAC1W;
-
+		dbcr_dac(task) |= DBCR_DAC1W;
 	task->thread.regs->msr |= MSR_DE;
-#endif
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
 	return 0;
 }
 
@@ -839,6 +950,394 @@ void ptrace_disable(struct task_struct *child)
 	user_disable_single_step(child);
 }
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+static long set_intruction_bp(struct task_struct *child,
+			      struct ppc_hw_breakpoint *bp_info)
+{
+	int slot;
+	int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0);
+	int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0);
+	int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0);
+	int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0);
+
+	if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+		slot2_in_use = 1;
+	if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+		slot4_in_use = 1;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
+
+		/* Make sure range is valid. */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+
+		/* We need a pair of IAC regsisters */
+		if ((!slot1_in_use) && (!slot2_in_use)) {
+			slot = 1;
+			child->thread.iac1 = bp_info->addr;
+			child->thread.iac2 = bp_info->addr2;
+			child->thread.dbcr0 |= DBCR0_IAC1;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC12X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC12I;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if ((!slot3_in_use) && (!slot4_in_use)) {
+			slot = 3;
+			child->thread.iac3 = bp_info->addr;
+			child->thread.iac4 = bp_info->addr2;
+			child->thread.dbcr0 |= DBCR0_IAC3;
+			if (bp_info->addr_mode ==
+					PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+				dbcr_iac_range(child) |= DBCR_IAC34X;
+			else
+				dbcr_iac_range(child) |= DBCR_IAC34I;
+#endif
+		} else
+			return -ENOSPC;
+	} else {
+		/* We only need one.  If possible leave a pair free in
+		 * case a range is needed later
+		 */
+		if (!slot1_in_use) {
+			/*
+			 * Don't use iac1 if iac1-iac2 are free and either
+			 * iac3 or iac4 (but not both) are free
+			 */
+			if (slot2_in_use || (slot3_in_use == slot4_in_use)) {
+				slot = 1;
+				child->thread.iac1 = bp_info->addr;
+				child->thread.dbcr0 |= DBCR0_IAC1;
+				goto out;
+			}
+		}
+		if (!slot2_in_use) {
+			slot = 2;
+			child->thread.iac2 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+		} else if (!slot3_in_use) {
+			slot = 3;
+			child->thread.iac3 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC3;
+		} else if (!slot4_in_use) {
+			slot = 4;
+			child->thread.iac4 = bp_info->addr;
+			child->thread.dbcr0 |= DBCR0_IAC4;
+#endif
+		} else
+			return -ENOSPC;
+	}
+out:
+	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot;
+}
+
+static int del_instruction_bp(struct task_struct *child, int slot)
+{
+	switch (slot) {
+	case 1:
+		if ((child->thread.dbcr0 & DBCR0_IAC1) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE) {
+			/* address range - clear slots 1 & 2 */
+			child->thread.iac2 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC12MODE;
+		}
+		child->thread.iac1 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC1;
+		break;
+	case 2:
+		if ((child->thread.dbcr0 & DBCR0_IAC2) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC12MODE)
+			/* used in a range */
+			return -EINVAL;
+		child->thread.iac2 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC2;
+		break;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+	case 3:
+		if ((child->thread.dbcr0 & DBCR0_IAC3) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE) {
+			/* address range - clear slots 3 & 4 */
+			child->thread.iac4 = 0;
+			dbcr_iac_range(child) &= ~DBCR_IAC34MODE;
+		}
+		child->thread.iac3 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC3;
+		break;
+	case 4:
+		if ((child->thread.dbcr0 & DBCR0_IAC4) == 0)
+			return -ENOENT;
+
+		if (dbcr_iac_range(child) & DBCR_IAC34MODE)
+			/* Used in a range */
+			return -EINVAL;
+		child->thread.iac4 = 0;
+		child->thread.dbcr0 &= ~DBCR0_IAC4;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info)
+{
+	int byte_enable =
+		(bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT)
+		& 0xf;
+	int condition_mode =
+		bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE;
+	int slot;
+
+	if (byte_enable && (condition_mode == 0))
+		return -EINVAL;
+
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) {
+		slot = 1;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC1R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC1W;
+		child->thread.dac1 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.dvc1 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.dbcr2 |=
+				((byte_enable << DBCR2_DVC1BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC1M_SHIFT));
+		}
+#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	} else if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
+		/* Both dac1 and dac2 are part of a range */
+		return -ENOSPC;
+#endif
+	} else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) {
+		slot = 2;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+			dbcr_dac(child) |= DBCR_DAC2R;
+		if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+			dbcr_dac(child) |= DBCR_DAC2W;
+		child->thread.dac2 = (unsigned long)bp_info->addr;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		if (byte_enable) {
+			child->thread.dvc2 =
+				(unsigned long)bp_info->condition_value;
+			child->thread.dbcr2 |=
+				((byte_enable << DBCR2_DVC2BE_SHIFT) |
+				 (condition_mode << DBCR2_DVC2M_SHIFT));
+		}
+#endif
+	} else
+		return -ENOSPC;
+	child->thread.dbcr0 |= DBCR0_IDM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return slot + 4;
+}
+
+static int del_dac(struct task_struct *child, int slot)
+{
+	if (slot == 1) {
+		if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0)
+			return -ENOENT;
+
+		child->thread.dac1 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.dbcr2 & DBCR2_DAC12MODE) {
+			child->thread.dac2 = 0;
+			child->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+		}
+		child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.dvc1 = 0;
+#endif
+	} else if (slot == 2) {
+		if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0)
+			return -ENOENT;
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		if (child->thread.dbcr2 & DBCR2_DAC12MODE)
+			/* Part of a range */
+			return -EINVAL;
+		child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE);
+#endif
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+		child->thread.dvc2 = 0;
+#endif
+		child->thread.dac2 = 0;
+		dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+static int set_dac_range(struct task_struct *child,
+			 struct ppc_hw_breakpoint *bp_info)
+{
+	int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK;
+
+	/* We don't allow range watchpoints to be used with DVC */
+	if (bp_info->condition_mode)
+		return -EINVAL;
+
+	/*
+	 * Best effort to verify the address range.  The user/supervisor bits
+	 * prevent trapping in kernel space, but let's fail on an obvious bad
+	 * range.  The simple test on the mask is not fool-proof, and any
+	 * exclusive range will spill over into kernel space.
+	 */
+	if (bp_info->addr >= TASK_SIZE)
+		return -EIO;
+	if (mode == PPC_BREAKPOINT_MODE_MASK) {
+		/*
+		 * dac2 is a bitmask.  Don't allow a mask that makes a
+		 * kernel space address from a valid dac1 value
+		 */
+		if (~((unsigned long)bp_info->addr2) >= TASK_SIZE)
+			return -EIO;
+	} else {
+		/*
+		 * For range breakpoints, addr2 must also be a valid address
+		 */
+		if (bp_info->addr2 >= TASK_SIZE)
+			return -EIO;
+	}
+
+	if (child->thread.dbcr0 &
+	    (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W))
+		return -ENOSPC;
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
+		child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM);
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
+		child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM);
+	child->thread.dac1 = bp_info->addr;
+	child->thread.dac2 = bp_info->addr2;
+	if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE)
+		child->thread.dbcr2  |= DBCR2_DAC12M;
+	else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE)
+		child->thread.dbcr2  |= DBCR2_DAC12MX;
+	else	/* PPC_BREAKPOINT_MODE_MASK */
+		child->thread.dbcr2  |= DBCR2_DAC12MM;
+	child->thread.regs->msr |= MSR_DE;
+
+	return 5;
+}
+#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */
+
+static long ppc_set_hwdebug(struct task_struct *child,
+		     struct ppc_hw_breakpoint *bp_info)
+{
+	if (bp_info->version != 1)
+		return -ENOTSUPP;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	/*
+	 * Check for invalid flags and combinations
+	 */
+	if ((bp_info->trigger_type == 0) ||
+	    (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE |
+				       PPC_BREAKPOINT_TRIGGER_RW)) ||
+	    (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) ||
+	    (bp_info->condition_mode &
+	     ~(PPC_BREAKPOINT_CONDITION_MODE |
+	       PPC_BREAKPOINT_CONDITION_BE_ALL)))
+		return -EINVAL;
+#if CONFIG_PPC_ADV_DEBUG_DVCS == 0
+	if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
+		return -EINVAL;
+#endif
+
+	if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) {
+		if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
+		    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
+			return -EINVAL;
+		return set_intruction_bp(child, bp_info);
+	}
+	if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
+		return set_dac(child, bp_info);
+
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+	return set_dac_range(child, bp_info);
+#else
+	return -EINVAL;
+#endif
+#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */
+	/*
+	 * We only support one data breakpoint
+	 */
+	if (((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0) ||
+	    ((bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0) ||
+	    (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_WRITE) ||
+	    (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) ||
+	    (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
+		return -EINVAL;
+
+	if (child->thread.dabr)
+		return -ENOSPC;
+
+	if ((unsigned long)bp_info->addr >= TASK_SIZE)
+		return -EIO;
+
+	child->thread.dabr = (unsigned long)bp_info->addr;
+
+	return 1;
+#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
+}
+
+static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
+{
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	int rc;
+
+	if (data <= 4)
+		rc = del_instruction_bp(child, (int)data);
+	else
+		rc = del_dac(child, (int)data - 4);
+
+	if (!rc) {
+		if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0,
+					child->thread.dbcr1)) {
+			child->thread.dbcr0 &= ~DBCR0_IDM;
+			child->thread.regs->msr &= ~MSR_DE;
+		}
+	}
+	return rc;
+#else
+	if (data != 1)
+		return -EINVAL;
+	if (child->thread.dabr == 0)
+		return -ENOENT;
+
+	child->thread.dabr = 0;
+
+	return 0;
+#endif
+}
+
 /*
  * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls,
  * we mark them as obsolete now, they will be removed in a future version
@@ -932,13 +1431,77 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
+	case PPC_PTRACE_GETHWDBGINFO: {
+		struct ppc_debug_info dbginfo;
+
+		dbginfo.version = 1;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS;
+		dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS;
+		dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS;
+		dbginfo.data_bp_alignment = 4;
+		dbginfo.sizeof_condition = 4;
+		dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE |
+				   PPC_DEBUG_FEATURE_INSN_BP_MASK;
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		dbginfo.features |=
+				   PPC_DEBUG_FEATURE_DATA_BP_RANGE |
+				   PPC_DEBUG_FEATURE_DATA_BP_MASK;
+#endif
+#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+		dbginfo.num_instruction_bps = 0;
+		dbginfo.num_data_bps = 1;
+		dbginfo.num_condition_regs = 0;
+#ifdef CONFIG_PPC64
+		dbginfo.data_bp_alignment = 8;
+#else
+		dbginfo.data_bp_alignment = 4;
+#endif
+		dbginfo.sizeof_condition = 0;
+		dbginfo.features = 0;
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
+
+		if (!access_ok(VERIFY_WRITE, data,
+			       sizeof(struct ppc_debug_info)))
+			return -EFAULT;
+		ret = __copy_to_user((struct ppc_debug_info __user *)data,
+				     &dbginfo, sizeof(struct ppc_debug_info)) ?
+		      -EFAULT : 0;
+		break;
+	}
+
+	case PPC_PTRACE_SETHWDEBUG: {
+		struct ppc_hw_breakpoint bp_info;
+
+		if (!access_ok(VERIFY_READ, data,
+			       sizeof(struct ppc_hw_breakpoint)))
+			return -EFAULT;
+		ret = __copy_from_user(&bp_info,
+				       (struct ppc_hw_breakpoint __user *)data,
+				       sizeof(struct ppc_hw_breakpoint)) ?
+		      -EFAULT : 0;
+		if (!ret)
+			ret = ppc_set_hwdebug(child, &bp_info);
+		break;
+	}
+
+	case PPC_PTRACE_DELHWDEBUG: {
+		ret = ppc_del_hwdebug(child, addr, data);
+		break;
+	}
+
 	case PTRACE_GET_DEBUGREG: {
 		ret = -EINVAL;
 		/* We only support one DABR and no IABRS at the moment */
 		if (addr > 0)
 			break;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+		ret = put_user(child->thread.dac1,
+			       (unsigned long __user *)data);
+#else
 		ret = put_user(child->thread.dabr,
 			       (unsigned long __user *)data);
+#endif
 		break;
 	}
 
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index fd0d294..d0516db 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,7 +22,8 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -690,10 +691,14 @@ void rtas_os_term(char *str)
 {
 	int status;
 
-	if (panic_timeout)
-		return;
-
-	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
+	/*
+	 * Firmware with the ibm,extended-os-term property is guaranteed
+	 * to always return from an ibm,os-term call. Earlier versions without
+	 * this property may terminate the partition which we want to avoid
+	 * since it interferes with panic_timeout.
+	 */
+	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") ||
+	    RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term"))
 		return;
 
 	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
@@ -704,8 +709,7 @@ void rtas_os_term(char *str)
 	} while (rtas_busy_delay(status));
 
 	if (status != 0)
-		printk(KERN_EMERG "ibm,os-term call failed %d\n",
-			       status);
+		printk(KERN_EMERG "ibm,os-term call failed %d\n", status);
 }
 
 static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
@@ -930,11 +934,11 @@ void __init rtas_initialize(void)
 	 */
 #ifdef CONFIG_PPC64
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
-		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+		rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}
 #endif
-	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+	rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index a85117d..67a84d8 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -15,6 +15,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
@@ -93,12 +94,8 @@ struct flash_block_list {
 	struct flash_block_list *next;
 	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
 };
-struct flash_block_list_header { /* just the header of flash_block_list */
-	unsigned long num_blocks;
-	struct flash_block_list *next;
-};
 
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
 
 /* Use slab cache to guarantee 4k alignment */
 static struct kmem_cache *flash_block_cache = NULL;
@@ -107,13 +104,14 @@ static struct kmem_cache *flash_block_cache = NULL;
 
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go.  The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
  * is treated as the number of entries currently in the block
- * (i.e. not a byte count).  This is all fixed on release.
+ * (i.e. not a byte count).  This is all fixed when calling 
+ * the flash routine.
  */
 
 /* Status int must be first member of struct */
@@ -200,16 +198,16 @@ static int rtas_flash_release(struct inode *inode, struct file *file)
 	if (uf->flist) {    
 		/* File was opened in write mode for a new flash attempt */
 		/* Clear saved list */
-		if (rtas_firmware_flash_list.next) {
-			free_flash_list(rtas_firmware_flash_list.next);
-			rtas_firmware_flash_list.next = NULL;
+		if (rtas_firmware_flash_list) {
+			free_flash_list(rtas_firmware_flash_list);
+			rtas_firmware_flash_list = NULL;
 		}
 
 		if (uf->status != FLASH_AUTH)  
 			uf->status = flash_list_valid(uf->flist);
 
 		if (uf->status == FLASH_IMG_READY) 
-			rtas_firmware_flash_list.next = uf->flist;
+			rtas_firmware_flash_list = uf->flist;
 		else
 			free_flash_list(uf->flist);
 
@@ -592,7 +590,7 @@ static void rtas_flash_firmware(int reboot_type)
 	unsigned long rtas_block_list;
 	int i, status, update_token;
 
-	if (rtas_firmware_flash_list.next == NULL)
+	if (rtas_firmware_flash_list == NULL)
 		return;		/* nothing to do */
 
 	if (reboot_type != SYS_RESTART) {
@@ -609,20 +607,25 @@ static void rtas_flash_firmware(int reboot_type)
 		return;
 	}
 
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
+	/*
+	 * NOTE: the "first" block must be under 4GB, so we create
+	 * an entry with no data blocks in the reserved buffer in
+	 * the kernel data segment.
 	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	spin_lock(&rtas_data_buf_lock);
+	flist = (struct flash_block_list *)&rtas_data_buf[0];
+	flist->num_blocks = 0;
+	flist->next = rtas_firmware_flash_list;
 	rtas_block_list = virt_to_abs(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		spin_unlock(&rtas_data_buf_lock);
 		return;
 	}
 
 	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
 	/* Update the block_list in place. */
+	rtas_firmware_flash_list = NULL; /* too hard to backout on error */
 	image_size = 0;
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
@@ -663,6 +666,7 @@ static void rtas_flash_firmware(int reboot_type)
 		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
 		break;
 	}
+	spin_unlock(&rtas_data_buf_lock);
 }
 
 static void remove_flash_pde(struct proc_dir_entry *dp)
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 2e4832a..638883e 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -20,6 +20,7 @@
 #include <linux/spinlock.h>
 #include <linux/cpu.h>
 #include <linux/workqueue.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -410,9 +411,9 @@ static void rtas_event_scan(struct work_struct *w)
 
 	get_online_cpus();
 
-	cpu = next_cpu(smp_processor_id(), cpu_online_map);
-	if (cpu == NR_CPUS) {
-		cpu = first_cpu(cpu_online_map);
+	cpu = cpumask_next(smp_processor_id(), cpu_online_mask);
+        if (cpu >= nr_cpu_ids) {
+		cpu = cpumask_first(cpu_online_mask);
 
 		if (first_pass) {
 			first_pass = 0;
@@ -465,8 +466,8 @@ static void start_event_scan(void)
 	/* Retreive errors from nvram if any */
 	retreive_nvram_error_log();
 
-	schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
-				 event_scan_delay);
+	schedule_delayed_work_on(cpumask_first(cpu_online_mask),
+				 &event_scan_work, event_scan_delay);
 }
 
 static int __init rtas_init(void)
@@ -489,6 +490,12 @@ static int __init rtas_init(void)
 		return -ENODEV;
 	}
 
+	if (!rtas_event_scan_rate) {
+		/* Broken firmware: take a rate of zero to mean don't scan */
+		printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n");
+		return 0;
+	}
+
 	/* Make room for the sequence number */
 	rtas_error_log_max = rtas_get_error_log_max();
 	rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 03dd6a2..b7e6c7e 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -33,9 +33,10 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
+#include <asm/paca.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/vdso_datapage.h>
@@ -160,45 +161,44 @@ extern u32 cpu_temp_both(unsigned long cpu);
 DEFINE_PER_CPU(unsigned int, cpu_pvr);
 #endif
 
-static int show_cpuinfo(struct seq_file *m, void *v)
+static void show_cpuinfo_summary(struct seq_file *m)
 {
-	unsigned long cpu_id = (unsigned long)v - 1;
-	unsigned int pvr;
-	unsigned short maj;
-	unsigned short min;
-
-	if (cpu_id == NR_CPUS) {
-		struct device_node *root;
-		const char *model = NULL;
+	struct device_node *root;
+	const char *model = NULL;
 #if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
-		unsigned long bogosum = 0;
-		int i;
-		for_each_online_cpu(i)
-			bogosum += loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+	unsigned long bogosum = 0;
+	int i;
+	for_each_online_cpu(i)
+		bogosum += loops_per_jiffy;
+	seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+		   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
 #endif /* CONFIG_SMP && CONFIG_PPC32 */
-		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-		if (ppc_md.name)
-			seq_printf(m, "platform\t: %s\n", ppc_md.name);
-		root = of_find_node_by_path("/");
-		if (root)
-			model = of_get_property(root, "model", NULL);
-		if (model)
-			seq_printf(m, "model\t\t: %s\n", model);
-		of_node_put(root);
-
-		if (ppc_md.show_cpuinfo != NULL)
-			ppc_md.show_cpuinfo(m);
+	seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+	if (ppc_md.name)
+		seq_printf(m, "platform\t: %s\n", ppc_md.name);
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	if (model)
+		seq_printf(m, "model\t\t: %s\n", model);
+	of_node_put(root);
+
+	if (ppc_md.show_cpuinfo != NULL)
+		ppc_md.show_cpuinfo(m);
 
 #ifdef CONFIG_PPC32
-		/* Display the amount of memory */
-		seq_printf(m, "Memory\t\t: %d MB\n",
-			   (unsigned int)(total_memory / (1024 * 1024)));
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n",
+		   (unsigned int)(total_memory / (1024 * 1024)));
 #endif
+}
 
-		return 0;
-	}
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long cpu_id = (unsigned long)v - 1;
+	unsigned int pvr;
+	unsigned short maj;
+	unsigned short min;
 
 	/* We only show online cpus: disable preempt (overzealous, I
 	 * knew) to prevent cpu going down. */
@@ -307,19 +307,28 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #endif
 
 	preempt_enable();
+
+	/* If this is the last cpu, print the summary */
+	if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
+		show_cpuinfo_summary(m);
+
 	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	unsigned long i = *pos;
-
-	return i <= NR_CPUS ? (void *)(i + 1) : NULL;
+	if (*pos == 0)	/* just in case, cpu 0 is not the first */
+		*pos = cpumask_first(cpu_online_mask);
+	else
+		*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	if ((*pos) < nr_cpu_ids)
+		return (void *)(unsigned long)(*pos + 1);
+	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	++*pos;
+	(*pos)++;
 	return c_start(m, pos);
 }
 
@@ -385,14 +394,14 @@ static void __init cpu_init_thread_core_maps(int tpc)
 
 /**
  * setup_cpu_maps - initialize the following cpu maps:
- *                  cpu_possible_map
- *                  cpu_present_map
+ *                  cpu_possible_mask
+ *                  cpu_present_mask
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
  *
  * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
+ * cpu_online_mask as they come up.
  *
  * This function is valid only for Open Firmware systems.  finish_device_tree
  * must be called before using this.
@@ -493,6 +502,8 @@ void __init smp_setup_cpu_maps(void)
 	 * here will have to be reworked
 	 */
 	cpu_init_thread_core_maps(nthreads);
+
+	free_unused_pacas();
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index b152de3..a10ffc8 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -16,7 +16,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -39,7 +39,6 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
-#include <asm/swiotlb.h>
 
 #include "setup.h"
 
@@ -242,23 +241,19 @@ int __init ppc_init(void)
 
 arch_initcall(ppc_init);
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 static void __init exc_lvl_early_init(void)
@@ -266,15 +261,15 @@ static void __init exc_lvl_early_init(void)
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #ifdef CONFIG_BOOKE
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #endif
 	}
 }
@@ -343,11 +338,6 @@ void __init setup_arch(char **cmdline_p)
 		ppc_md.setup_arch();
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
-#ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
-#endif
-
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 6568406..d135f93 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -34,7 +34,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -61,7 +61,6 @@
 #include <asm/xmon.h>
 #include <asm/udbg.h>
 #include <asm/kexec.h>
-#include <asm/swiotlb.h>
 #include <asm/mmu_context.h>
 
 #include "setup.h"
@@ -144,9 +143,9 @@ early_param("smt-enabled", early_smt_enabled);
 #endif /* CONFIG_SMP */
 
 /* Put the paca pointer into r13 and SPRG_PACA */
-void __init setup_paca(int cpu)
+static void __init setup_paca(struct paca_struct *new_paca)
 {
-	local_paca = &paca[cpu];
+	local_paca = new_paca;
 	mtspr(SPRN_SPRG_PACA, local_paca);
 #ifdef CONFIG_PPC_BOOK3E
 	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
@@ -159,7 +158,7 @@ void __init setup_paca(int cpu)
  * the CPU that ignores the top 2 bits of the address in real
  * mode so we can access kernel globals normally provided we
  * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
  * data structures, and allocate & initialize the hash table
  * and segment tables so we can start running with translation
  * enabled.
@@ -176,14 +175,12 @@ void __init early_setup(unsigned long dt_ptr)
 {
 	/* -------- printk is _NOT_ safe to use here ! ------- */
 
-	/* Fill in any unititialised pacas */
-	initialise_pacas();
-
 	/* Identify CPU type */
 	identify_cpu(0, mfspr(SPRN_PVR));
 
 	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
-	setup_paca(0);
+	initialise_paca(&boot_paca, 0);
+	setup_paca(&boot_paca);
 
 	/* Initialize lockdep early or else spinlocks will blow */
 	lockdep_init();
@@ -203,7 +200,7 @@ void __init early_setup(unsigned long dt_ptr)
 	early_init_devtree(__va(dt_ptr));
 
 	/* Now we know the logical id of our boot cpu, setup the paca. */
-	setup_paca(boot_cpuid);
+	setup_paca(&paca[boot_cpuid]);
 
 	/* Fix up paca fields required for the boot cpu */
 	get_paca()->cpu_start = 1;
@@ -407,7 +404,7 @@ void __init setup_system(void)
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
+	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -427,9 +424,17 @@ void __init setup_system(void)
 	DBG(" <- setup_system()\n");
 }
 
-#ifdef CONFIG_IRQSTACKS
+static u64 slb0_limit(void)
+{
+	if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+		return 1UL << SID_SHIFT_1T;
+	}
+	return 1UL << SID_SHIFT;
+}
+
 static void __init irqstack_early_init(void)
 {
+	u64 limit = slb0_limit();
 	unsigned int i;
 
 	/*
@@ -438,16 +443,13 @@ static void __init irqstack_early_init(void)
 	 */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
-					    THREAD_SIZE, 0x10000000));
+			__va(memblock_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, limit));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
-					    THREAD_SIZE, 0x10000000));
+			__va(memblock_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, limit));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
@@ -456,11 +458,11 @@ static void __init exc_lvl_early_init(void)
 
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 #else
@@ -473,7 +475,7 @@ static void __init exc_lvl_early_init(void)
  */
 static void __init emergency_stack_init(void)
 {
-	unsigned long limit;
+	u64 limit;
 	unsigned int i;
 
 	/*
@@ -485,11 +487,11 @@ static void __init emergency_stack_init(void)
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(slb0_limit(), memblock.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
-		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
 		sp += THREAD_SIZE;
 		paca[i].emergency_sp = __va(sp);
 	}
@@ -543,11 +545,6 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
-#ifdef CONFIG_SWIOTLB
-	if (ppc_swiotlb_enable)
-		swiotlb_init(1);
-#endif
-
 	paging_init();
 
 	/* Initialize the MMU context management stuff */
@@ -581,12 +578,6 @@ void ppc64_boot_msg(unsigned int src, const char *msg)
 	printk("[boot]%04x %s\n", src, msg);
 }
 
-void cpu_die(void)
-{
-	if (ppc_md.cpu_die)
-		ppc_md.cpu_die();
-}
-
 #ifdef CONFIG_SMP
 #define PCPU_DYN_SIZE		()
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 00b5078..a0afb55 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -140,17 +140,15 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 		return 0;               /* no signals delivered */
 	}
 
+#ifndef CONFIG_PPC_ADV_DEBUG_REGS
         /*
 	 * Reenable the DABR before delivering the signal to
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr) {
+	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
-#if defined(CONFIG_BOOKE)
-		mtspr(SPRN_DBCR0, current->thread.dbcr0);
 #endif
-	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d670429..2666101 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1078,7 +1078,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	int i;
 	unsigned char tmp;
 	unsigned long new_msr = regs->msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	unsigned long new_dbcr0 = current->thread.dbcr0;
 #endif
 
@@ -1087,13 +1087,17 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 			return -EFAULT;
 		switch (op.dbg_type) {
 		case SIG_DBG_SINGLE_STEPPING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			if (op.dbg_value) {
 				new_msr |= MSR_DE;
 				new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
 			} else {
-				new_msr &= ~MSR_DE;
-				new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC);
+				new_dbcr0 &= ~DBCR0_IC;
+				if (!DBCR_ACTIVE_EVENTS(new_dbcr0,
+						current->thread.dbcr1)) {
+					new_msr &= ~MSR_DE;
+					new_dbcr0 &= ~DBCR0_IDM;
+				}
 			}
 #else
 			if (op.dbg_value)
@@ -1103,7 +1107,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 #endif
 			break;
 		case SIG_DBG_BRANCH_TRACING:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 			return -EINVAL;
 #else
 			if (op.dbg_value)
@@ -1124,7 +1128,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	   failure is a problem, anyway, and it's very unlikely unless
 	   the user is really doing something wrong. */
 	regs->msr = new_msr;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	current->thread.dbcr0 = new_dbcr0;
 #endif
 
diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c
index a5e5452..03e45c4 100644
--- a/arch/powerpc/kernel/smp-tbsync.c
+++ b/arch/powerpc/kernel/smp-tbsync.c
@@ -10,6 +10,7 @@
 #include <linux/smp.h>
 #include <linux/unistd.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <asm/atomic.h>
 #include <asm/smp.h>
 #include <asm/time.h>
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c2ee144..5c196d1 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -59,8 +59,8 @@
 
 struct thread_info *secondary_ti;
 
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
-DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
+DEFINE_PER_CPU(cpumask_var_t, cpu_core_map);
 
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_core_map);
@@ -271,6 +271,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	smp_store_cpu_info(boot_cpuid);
 	cpu_callin_map[boot_cpuid] = 1;
 
+	for_each_possible_cpu(cpu) {
+		zalloc_cpumask_var_node(&per_cpu(cpu_sibling_map, cpu),
+					GFP_KERNEL, cpu_to_node(cpu));
+		zalloc_cpumask_var_node(&per_cpu(cpu_core_map, cpu),
+					GFP_KERNEL, cpu_to_node(cpu));
+	}
+
+	cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
+	cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
+
 	if (smp_ops)
 		if (smp_ops->probe)
 			max_cpus = smp_ops->probe();
@@ -289,10 +299,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 void __devinit smp_prepare_boot_cpu(void)
 {
 	BUG_ON(smp_processor_id() != boot_cpuid);
-
-	set_cpu_online(boot_cpuid, true);
-	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
-	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -313,7 +319,7 @@ int generic_cpu_disable(void)
 	set_cpu_online(cpu, false);
 #ifdef CONFIG_PPC64
 	vdso_data->processorCount--;
-	fixup_irqs(cpu_online_map);
+	fixup_irqs(cpu_online_mask);
 #endif
 	return 0;
 }
@@ -333,7 +339,7 @@ int generic_cpu_enable(unsigned int cpu)
 		cpu_relax();
 
 #ifdef CONFIG_PPC64
-	fixup_irqs(cpu_online_map);
+	fixup_irqs(cpu_online_mask);
 	/* counter the irq disable in fixup_irqs */
 	local_irq_enable();
 #endif
@@ -462,7 +468,7 @@ out:
 	return id;
 }
 
-/* Must be called when no change can occur to cpu_present_map,
+/* Must be called when no change can occur to cpu_present_mask,
  * i.e. during cpu online or offline.
  */
 static struct device_node *cpu_to_l2cache(int cpu)
@@ -495,6 +501,14 @@ int __devinit start_secondary(void *unused)
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+#endif
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
 	cpu_callin_map[cpu] = 1;
@@ -517,15 +531,15 @@ int __devinit start_secondary(void *unused)
 	for (i = 0; i < threads_per_core; i++) {
 		if (cpu_is_offline(base + i))
 			continue;
-		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
-		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpumask_set_cpu(cpu, cpu_sibling_mask(base + i));
+		cpumask_set_cpu(base + i, cpu_sibling_mask(cpu));
 
 		/* cpu_core_map should be a superset of
 		 * cpu_sibling_map even if we don't have cache
 		 * information, so update the former here, too.
 		 */
-		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
-		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+		cpumask_set_cpu(cpu, cpu_core_mask(base + i));
+		cpumask_set_cpu(base + i, cpu_core_mask(cpu));
 	}
 	l2_cache = cpu_to_l2cache(cpu);
 	for_each_online_cpu(i) {
@@ -533,8 +547,8 @@ int __devinit start_secondary(void *unused)
 		if (!np)
 			continue;
 		if (np == l2_cache) {
-			cpu_set(cpu, per_cpu(cpu_core_map, i));
-			cpu_set(i, per_cpu(cpu_core_map, cpu));
+			cpumask_set_cpu(cpu, cpu_core_mask(i));
+			cpumask_set_cpu(i, cpu_core_mask(cpu));
 		}
 		of_node_put(np);
 	}
@@ -554,19 +568,22 @@ int setup_profiling_timer(unsigned int multiplier)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-	cpumask_t old_mask;
+	cpumask_var_t old_mask;
 
 	/* We want the setup_cpu() here to be called from CPU 0, but our
 	 * init thread may have been "borrowed" by another CPU in the meantime
 	 * se we pin us down to CPU 0 for a short while
 	 */
-	old_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
+	alloc_cpumask_var(&old_mask, GFP_NOWAIT);
+	cpumask_copy(old_mask, &current->cpus_allowed);
+	set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
 	
 	if (smp_ops && smp_ops->setup_cpu)
 		smp_ops->setup_cpu(boot_cpuid);
 
-	set_cpus_allowed(current, old_mask);
+	set_cpus_allowed_ptr(current, old_mask);
+
+	free_cpumask_var(old_mask);
 
 	snapshot_timebases();
 
@@ -591,10 +608,10 @@ int __cpu_disable(void)
 	/* Update sibling maps */
 	base = cpu_first_thread_in_core(cpu);
 	for (i = 0; i < threads_per_core; i++) {
-		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
-		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
-		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
-		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+		cpumask_clear_cpu(cpu, cpu_sibling_mask(base + i));
+		cpumask_clear_cpu(base + i, cpu_sibling_mask(cpu));
+		cpumask_clear_cpu(cpu, cpu_core_mask(base + i));
+		cpumask_clear_cpu(base + i, cpu_core_mask(cpu));
 	}
 
 	l2_cache = cpu_to_l2cache(cpu);
@@ -603,8 +620,8 @@ int __cpu_disable(void)
 		if (!np)
 			continue;
 		if (np == l2_cache) {
-			cpu_clear(cpu, per_cpu(cpu_core_map, i));
-			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+			cpumask_clear_cpu(cpu, cpu_core_mask(i));
+			cpumask_clear_cpu(i, cpu_core_mask(cpu));
 		}
 		of_node_put(np);
 	}
@@ -631,4 +648,10 @@ void cpu_hotplug_driver_unlock()
 {
 	mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
 }
+
+void cpu_die(void)
+{
+	if (ppc_md.cpu_die)
+		ppc_md.cpu_die();
+}
 #endif
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
index 23c8c5e..af0e829 100644
--- a/arch/powerpc/kernel/softemu8xx.c
+++ b/arch/powerpc/kernel/softemu8xx.c
@@ -21,7 +21,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
 
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
new file mode 100644
index 0000000..11a3930
--- /dev/null
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -0,0 +1,193 @@
+/*
+ * Based on swsusp_32.S, modified for FSL BookE by
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright (c) 2009-2010 MontaVista Software, LLC.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_TCR		0xc
+#define SL_SPRG0	0x10
+#define SL_SPRG1	0x14
+#define SL_SPRG2	0x18
+#define SL_SPRG3	0x1c
+#define SL_SPRG4	0x20
+#define SL_SPRG5	0x24
+#define SL_SPRG6	0x28
+#define SL_SPRG7	0x2c
+#define SL_TBU		0x30
+#define SL_TBL		0x34
+#define SL_R2		0x38
+#define SL_CR		0x3c
+#define SL_LR		0x40
+#define SL_R12		0x44	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & TCR */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfspr	r4,SPRN_TCR
+	stw	r4,SL_TCR(r11)
+
+	/* Get a stable timebase and save it */
+1:	mfspr	r4,SPRN_TBRU
+	stw	r4,SL_TBU(r11)
+	mfspr	r5,SPRN_TBRL
+	stw	r5,SL_TBL(r11)
+	mfspr	r3,SPRN_TBRU
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG1(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG2(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG3(r11)
+	mfsprg	r4,4
+	stw	r4,SL_SPRG4(r11)
+	mfsprg	r4,5
+	stw	r4,SL_SPRG5(r11)
+	mfsprg	r4,6
+	stw	r4,SL_SPRG6(r11)
+	mfsprg	r4,7
+	stw	r4,SL_SPRG7(r11)
+
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+_GLOBAL(swsusp_arch_resume)
+	sync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(restore_pblist)@h
+	ori	r11,r11,restore_pblist@l
+	lwz	r3,0(r11)
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	li	r0,256
+	mtctr	r0
+	lwz	r5,pbe_address(r3)	/* source */
+	lwz	r6,pbe_orig_address(r3)	/* destination */
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	lwz	r3,pbe_next(r3)
+	cmpwi	0,r3,0
+	bne	1b
+
+	bl flush_dcache_L1
+	bl flush_instruction_cache
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG1(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG2(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG3(r11)
+	mtsprg	3,r4
+	lwz	r4,SL_SPRG4(r11)
+	mtsprg	4,r4
+	lwz	r4,SL_SPRG5(r11)
+	mtsprg	5,r4
+	lwz	r4,SL_SPRG6(r11)
+	mtsprg	6,r4
+	lwz	r4,SL_SPRG7(r11)
+	mtsprg	7,r4
+
+	/* restore the MSR */
+	lwz	r3,SL_MSR(r11)
+	mtmsr	r3
+
+	/* Restore TB */
+	li	r3,0
+	mtspr	SPRN_TBWL,r3
+	lwz	r3,SL_TBU(r11)
+	lwz	r4,SL_TBL(r11)
+	mtspr	SPRN_TBWU,r3
+	mtspr	SPRN_TBWL,r4
+
+	/* Restore TCR and clear any pending bits in TSR. */
+	lwz	r4,SL_TCR(r11)
+	mtspr	SPRN_TCR,r4
+	lis	r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+	mtspr	SPRN_TSR,r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	li	r3,0
+	blr
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index c5a4732..19471a1 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -41,6 +41,7 @@
 #include <linux/ptrace.h>
 #include <linux/elf.h>
 #include <linux/ipc.h>
+#include <linux/slab.h>
 
 #include <asm/ptrace.h>
 #include <asm/types.h>
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 3370e62..f2496f2 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -42,100 +42,6 @@
 #include <asm/time.h>
 #include <asm/unistd.h>
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int sys_ipc(uint call, int first, unsigned long second, long third,
-	    void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -ENOSYS;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second, NULL);
-		break;
-	case SEMTIMEDOP:
-		ret = sys_semtimedop(first, (struct sembuf __user *)ptr,
-				      (unsigned)second,
-				      (const struct timespec __user *) fifth);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, (int)second, third);
-		break;
-	case SEMCTL: {
-		union semun fourth;
-
-		ret = -EINVAL;
-		if (!ptr)
-			break;
-		if ((ret = get_user(fourth.__pad, (void __user * __user *)ptr)))
-			break;
-		ret = sys_semctl(first, (int)second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf __user *)ptr,
-				 (size_t)second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			ret = -EINVAL;
-			if (!ptr)
-				break;
-			if ((ret = copy_from_user(&tmp,
-						(struct ipc_kludge __user *) ptr,
-						sizeof (tmp)) ? -EFAULT : 0))
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, (size_t) second,
-					  tmp.msgtyp, third);
-			break;
-		}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf __user *) ptr,
-					  (size_t)second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t)first, (int)second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, (int)second,
-				  (struct msqid_ds __user *)ptr);
-		break;
-	case SHMAT: {
-		ulong raddr;
-		ret = do_shmat(first, (char __user *)ptr, (int)second, &raddr);
-		if (ret)
-			break;
-		ret = put_user(raddr, (ulong __user *) third);
-		break;
-	}
-	case SHMDT:
-		ret = sys_shmdt((char __user *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, (size_t)second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, (int)second,
-				 (struct shmid_ds __user *)ptr);
-		break;
-	}
-
-	return ret;
-}
-
 static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 			unsigned long prot, unsigned long flags,
 			unsigned long fd, unsigned long off, int shift)
@@ -210,76 +116,6 @@ long ppc64_personality(unsigned long personality)
 }
 #endif
 
-#ifdef CONFIG_PPC64
-#define OVERRIDE_MACHINE    (personality(current->personality) == PER_LINUX32)
-#else
-#define OVERRIDE_MACHINE    0
-#endif
-
-static inline int override_machine(char __user *mach)
-{
-	if (OVERRIDE_MACHINE) {
-		/* change ppc64 to ppc */
-		if (__put_user(0, mach+3) || __put_user(0, mach+4))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-long ppc_newuname(struct new_utsname __user * name)
-{
-	int err = 0;
-
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_uname(struct old_utsname __user *name)
-{
-	int err = 0;
-	
-	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		err = -EFAULT;
-	up_read(&uts_sem);
-	if (!err)
-		err = override_machine(name->machine);
-	return err;
-}
-
-int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-  
-	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= override_machine(name->machine);
-	up_read(&uts_sem);
-
-	return error? -EFAULT: 0;
-}
-
 long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
 		      u32 len_high, u32 len_low)
 {
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index e235e52..c0d8c20 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -35,7 +35,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 #ifdef CONFIG_PPC64
 
 /* Time in microseconds we delay before sleeping in the idle loop */
-DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
+DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 };
 
 static ssize_t store_smt_snooze_delay(struct sys_device *dev,
 				      struct sysdev_attribute *attr,
@@ -44,9 +44,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev,
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 	ssize_t ret;
-	unsigned long snooze;
+	long snooze;
 
-	ret = sscanf(buf, "%lu", &snooze);
+	ret = sscanf(buf, "%ld", &snooze);
 	if (ret != 1)
 		return -EINVAL;
 
@@ -61,53 +61,23 @@ static ssize_t show_smt_snooze_delay(struct sys_device *dev,
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
-	return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
+	return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
 }
 
 static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
 		   store_smt_snooze_delay);
 
-/* Only parse OF options if the matching cmdline option was not specified */
-static int smt_snooze_cmdline;
-
-static int __init smt_setup(void)
-{
-	struct device_node *options;
-	const unsigned int *val;
-	unsigned int cpu;
-
-	if (!cpu_has_feature(CPU_FTR_SMT))
-		return -ENODEV;
-
-	options = of_find_node_by_path("/options");
-	if (!options)
-		return -ENODEV;
-
-	val = of_get_property(options, "ibm,smt-snooze-delay", NULL);
-	if (!smt_snooze_cmdline && val) {
-		for_each_possible_cpu(cpu)
-			per_cpu(smt_snooze_delay, cpu) = *val;
-	}
-
-	of_node_put(options);
-	return 0;
-}
-__initcall(smt_setup);
-
 static int __init setup_smt_snooze_delay(char *str)
 {
 	unsigned int cpu;
-	int snooze;
+	long snooze;
 
 	if (!cpu_has_feature(CPU_FTR_SMT))
 		return 1;
 
-	smt_snooze_cmdline = 1;
-
-	if (get_option(&str, &snooze)) {
-		for_each_possible_cpu(cpu)
-			per_cpu(smt_snooze_delay, cpu) = snooze;
-	}
+	snooze = simple_strtol(str, NULL, 10);
+	for_each_possible_cpu(cpu)
+		per_cpu(smt_snooze_delay, cpu) = snooze;
 
 	return 1;
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 6c6093d..0441bbd 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -265,8 +265,8 @@ void account_system_vtime(struct task_struct *tsk)
 		account_system_time(tsk, 0, delta, deltascaled);
 	else
 		account_idle_time(delta);
-	per_cpu(cputime_last_delta, smp_processor_id()) = delta;
-	per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
+	__get_cpu_var(cputime_last_delta) = delta;
+	__get_cpu_var(cputime_scaled_last_delta) = deltascaled;
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(account_system_vtime);
@@ -532,25 +532,60 @@ void __init iSeries_time_init_early(void)
 }
 #endif /* CONFIG_PPC_ISERIES */
 
-#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_PPC32)
-DEFINE_PER_CPU(u8, perf_event_pending);
+#ifdef CONFIG_PERF_EVENTS
 
-void set_perf_event_pending(void)
+/*
+ * 64-bit uses a byte in the PACA, 32-bit uses a per-cpu variable...
+ */
+#ifdef CONFIG_PPC64
+static inline unsigned long test_perf_event_pending(void)
 {
-	get_cpu_var(perf_event_pending) = 1;
-	set_dec(1);
-	put_cpu_var(perf_event_pending);
+	unsigned long x;
+
+	asm volatile("lbz %0,%1(13)"
+		: "=r" (x)
+		: "i" (offsetof(struct paca_struct, perf_event_pending)));
+	return x;
 }
 
+static inline void set_perf_event_pending_flag(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (1),
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
+}
+
+static inline void clear_perf_event_pending(void)
+{
+	asm volatile("stb %0,%1(13)" : :
+		"r" (0),
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
+}
+
+#else /* 32-bit */
+
+DEFINE_PER_CPU(u8, perf_event_pending);
+
+#define set_perf_event_pending_flag()	__get_cpu_var(perf_event_pending) = 1
 #define test_perf_event_pending()	__get_cpu_var(perf_event_pending)
 #define clear_perf_event_pending()	__get_cpu_var(perf_event_pending) = 0
 
-#else  /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
+#endif /* 32 vs 64 bit */
+
+void set_perf_event_pending(void)
+{
+	preempt_disable();
+	set_perf_event_pending_flag();
+	set_dec(1);
+	preempt_enable();
+}
+
+#else  /* CONFIG_PERF_EVENTS */
 
 #define test_perf_event_pending()	0
 #define clear_perf_event_pending()
 
-#endif /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
+#endif /* CONFIG_PERF_EVENTS */
 
 /*
  * For iSeries shared processors, we have to let the hypervisor
@@ -575,15 +610,13 @@ void timer_interrupt(struct pt_regs * regs)
 
 	trace_timer_interrupt_entry(regs);
 
+	__get_cpu_var(irq_stat).timer_irqs++;
+
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
 
 #ifdef CONFIG_PPC32
-	if (test_perf_event_pending()) {
-		clear_perf_event_pending();
-		perf_event_do_pending();
-	}
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
 #endif
@@ -602,6 +635,11 @@ void timer_interrupt(struct pt_regs * regs)
 
 	calculate_steal_time();
 
+	if (test_perf_event_pending()) {
+		clear_perf_event_pending();
+		perf_event_do_pending();
+	}
+
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		get_lppaca()->int_dword.fields.decr_int = 0;
@@ -935,8 +973,8 @@ static void register_decrementer_clockevent(int cpu)
 	*dec = decrementer_clockevent;
 	dec->cpumask = cpumask_of(cpu);
 
-	printk(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
-	       dec->name, dec->mult, dec->shift, cpu);
+	printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n",
+		    dec->name, dec->mult, dec->shift, cpu);
 
 	clockevents_register_device(dec);
 }
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index d069ff8..25fc339 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *  Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -21,7 +22,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
@@ -60,13 +60,13 @@
 #endif
 
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-int (*__debugger)(struct pt_regs *regs);
-int (*__debugger_ipi)(struct pt_regs *regs);
-int (*__debugger_bpt)(struct pt_regs *regs);
-int (*__debugger_sstep)(struct pt_regs *regs);
-int (*__debugger_iabr_match)(struct pt_regs *regs);
-int (*__debugger_dabr_match)(struct pt_regs *regs);
-int (*__debugger_fault_handler)(struct pt_regs *regs);
+int (*__debugger)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_ipi)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_bpt)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_sstep)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_iabr_match)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_dabr_match)(struct pt_regs *regs) __read_mostly;
+int (*__debugger_fault_handler)(struct pt_regs *regs) __read_mostly;
 
 EXPORT_SYMBOL(__debugger);
 EXPORT_SYMBOL(__debugger_ipi);
@@ -102,11 +102,11 @@ static inline void pmac_backlight_unblank(void) { }
 int die(const char *str, struct pt_regs *regs, long err)
 {
 	static struct {
-		spinlock_t lock;
+		raw_spinlock_t lock;
 		u32 lock_owner;
 		int lock_owner_depth;
 	} die = {
-		.lock =			__SPIN_LOCK_UNLOCKED(die.lock),
+		.lock =			__RAW_SPIN_LOCK_UNLOCKED(die.lock),
 		.lock_owner =		-1,
 		.lock_owner_depth =	0
 	};
@@ -120,7 +120,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 
 	if (die.lock_owner != raw_smp_processor_id()) {
 		console_verbose();
-		spin_lock_irqsave(&die.lock, flags);
+		raw_spin_lock_irqsave(&die.lock, flags);
 		die.lock_owner = smp_processor_id();
 		die.lock_owner_depth = 0;
 		bust_spinlocks(1);
@@ -146,6 +146,11 @@ int die(const char *str, struct pt_regs *regs, long err)
 #endif
 		printk("%s\n", ppc_md.name ? ppc_md.name : "");
 
+		sysfs_printk_last_file();
+		if (notify_die(DIE_OOPS, str, regs, err, 255,
+			       SIGSEGV) == NOTIFY_STOP)
+			return 1;
+
 		print_modules();
 		show_regs(regs);
 	} else {
@@ -155,7 +160,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 	bust_spinlocks(0);
 	die.lock_owner = -1;
 	add_taint(TAINT_DIE);
-	spin_unlock_irqrestore(&die.lock, flags);
+	raw_spin_unlock_irqrestore(&die.lock, flags);
 
 	if (kexec_should_crash(current) ||
 		kexec_sr_activated(smp_processor_id()))
@@ -294,14 +299,14 @@ static inline int check_io_access(struct pt_regs *regs)
 	return 0;
 }
 
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
 /* On 4xx, the reason for the machine check or program exception
    is in the ESR. */
 #define get_reason(regs)	((regs)->dsisr)
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -376,7 +381,132 @@ int machine_check_440A(struct pt_regs *regs)
 	}
 	return 0;
 }
+
+int machine_check_47x(struct pt_regs *regs)
+{
+	unsigned long reason = get_mc_reason(regs);
+	u32 mcsr;
+
+	printk(KERN_ERR "Machine check in kernel mode.\n");
+	if (reason & ESR_IMCP) {
+		printk(KERN_ERR
+		       "Instruction Synchronous Machine Check exception\n");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+		return 0;
+	}
+	mcsr = mfspr(SPRN_MCSR);
+	if (mcsr & MCSR_IB)
+		printk(KERN_ERR "Instruction Read PLB Error\n");
+	if (mcsr & MCSR_DRB)
+		printk(KERN_ERR "Data Read PLB Error\n");
+	if (mcsr & MCSR_DWB)
+		printk(KERN_ERR "Data Write PLB Error\n");
+	if (mcsr & MCSR_TLBP)
+		printk(KERN_ERR "TLB Parity Error\n");
+	if (mcsr & MCSR_ICP) {
+		flush_instruction_cache();
+		printk(KERN_ERR "I-Cache Parity Error\n");
+	}
+	if (mcsr & MCSR_DCSP)
+		printk(KERN_ERR "D-Cache Search Parity Error\n");
+	if (mcsr & PPC47x_MCSR_GPR)
+		printk(KERN_ERR "GPR Parity Error\n");
+	if (mcsr & PPC47x_MCSR_FPR)
+		printk(KERN_ERR "FPR Parity Error\n");
+	if (mcsr & PPC47x_MCSR_IPR)
+		printk(KERN_ERR "Machine Check exception is imprecise\n");
+
+	/* Clear MCSR */
+	mtspr(SPRN_MCSR, mcsr);
+
+	return 0;
+}
 #elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+	unsigned long mcsr = mfspr(SPRN_MCSR);
+	unsigned long reason = mcsr;
+	int recoverable = 1;
+
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+
+	if (reason & MCSR_ICPERR) {
+		printk("Instruction Cache Parity Error\n");
+
+		/*
+		 * This is recoverable by invalidating the i-cache.
+		 */
+		mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+		while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+			;
+
+		/*
+		 * This will generally be accompanied by an instruction
+		 * fetch error report -- only treat MCSR_IF as fatal
+		 * if it wasn't due to an L1 parity error.
+		 */
+		reason &= ~MCSR_IF;
+	}
+
+	if (reason & MCSR_DCPERR_MC) {
+		printk("Data Cache Parity Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_L2MMU_MHIT) {
+		printk("Hit on multiple TLB entries\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_NMI)
+		printk("Non-maskable interrupt\n");
+
+	if (reason & MCSR_IF) {
+		printk("Instruction Fetch Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LD) {
+		printk("Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_ST) {
+		printk("Store Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LDG) {
+		printk("Guarded Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_TLBSYNC)
+		printk("Simultaneous tlbsync operations\n");
+
+	if (reason & MCSR_BSL2_ERR) {
+		printk("Level 2 Cache Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_MAV) {
+		u64 addr;
+
+		addr = mfspr(SPRN_MCAR);
+		addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+		printk("Machine Check %s Address: %#llx\n",
+		       reason & MCSR_MEA ? "Effective" : "Physical", addr);
+	}
+
+	mtspr(SPRN_MCSR, mcsr);
+	return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
 int machine_check_e500(struct pt_regs *regs)
 {
 	unsigned long reason = get_mc_reason(regs);
@@ -478,6 +608,8 @@ void machine_check_exception(struct pt_regs *regs)
 {
 	int recover = 0;
 
+	__get_cpu_var(irq_stat).mce_exceptions++;
+
 	/* See if any machine dependent calls. In theory, we would want
 	 * to call the CPU first, and call the ppc_md. one if the CPU
 	 * one returns a positive number. However there is existing code
@@ -809,12 +941,15 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		return;
 	}
 	if (reason & REASON_TRAP) {
+		/* Debugger is first in line to stop recursive faults in
+		 * rcu_lock, notify_die, or atomic_notifier_call_chain */
+		if (debugger_bpt(regs))
+			return;
+
 		/* trap exception */
 		if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP)
 				== NOTIFY_STOP)
 			return;
-		if (debugger_bpt(regs))
-			return;
 
 		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
 		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
@@ -960,6 +1095,8 @@ void vsx_unavailable_exception(struct pt_regs *regs)
 
 void performance_monitor_exception(struct pt_regs *regs)
 {
+	__get_cpu_var(irq_stat).pmu_irqs++;
+
 	perf_irq(regs);
 }
 
@@ -1024,10 +1161,69 @@ void SoftwareEmulation(struct pt_regs *regs)
 }
 #endif /* CONFIG_8xx */
 
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
+{
+	int changed = 0;
+	/*
+	 * Determine the cause of the debug event, clear the
+	 * event flags and send a trap to the handler. Torez
+	 */
+	if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W);
+#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
+		current->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+#endif
+		do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT,
+			     5);
+		changed |= 0x01;
+	}  else if (debug_status & (DBSR_DAC2R | DBSR_DAC2W)) {
+		dbcr_dac(current) &= ~(DBCR_DAC2R | DBCR_DAC2W);
+		do_send_trap(regs, mfspr(SPRN_DAC2), debug_status, TRAP_HWBKPT,
+			     6);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC1) {
+		current->thread.dbcr0 &= ~DBCR0_IAC1;
+		dbcr_iac_range(current) &= ~DBCR_IAC12MODE;
+		do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT,
+			     1);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC2) {
+		current->thread.dbcr0 &= ~DBCR0_IAC2;
+		do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT,
+			     2);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC3) {
+		current->thread.dbcr0 &= ~DBCR0_IAC3;
+		dbcr_iac_range(current) &= ~DBCR_IAC34MODE;
+		do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT,
+			     3);
+		changed |= 0x01;
+	}  else if (debug_status & DBSR_IAC4) {
+		current->thread.dbcr0 &= ~DBCR0_IAC4;
+		do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT,
+			     4);
+		changed |= 0x01;
+	}
+	/*
+	 * At the point this routine was called, the MSR(DE) was turned off.
+	 * Check all other debug flags and see if that bit needs to be turned
+	 * back on or not.
+	 */
+	if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1))
+		regs->msr |= MSR_DE;
+	else
+		/* Make sure the IDM flag is off */
+		current->thread.dbcr0 &= ~DBCR0_IDM;
+
+	if (changed & 0x01)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+}
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
+	current->thread.dbsr = debug_status;
+
 	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
 	 * on server, it stops on the target of the branch. In order to simulate
 	 * the server behaviour, we thus restart right away with a single step
@@ -1071,29 +1267,23 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 		if (debugger_sstep(regs))
 			return;
 
-		if (user_mode(regs))
-			current->thread.dbcr0 &= ~(DBCR0_IC);
-
-		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
-	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
-		regs->msr &= ~MSR_DE;
-
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
-								DBCR0_IDM);
-		} else {
-			/* Disable DAC interupts */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
-						DBSR_DAC1W | DBCR0_IDM));
-
-			/* Clear the DAC event */
-			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
+			current->thread.dbcr0 &= ~DBCR0_IC;
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
+					       current->thread.dbcr1))
+				regs->msr |= MSR_DE;
+			else
+				/* Make sure the IDM bit is off */
+				current->thread.dbcr0 &= ~DBCR0_IDM;
+#endif
 		}
-		/* Setup and send the trap to the handler */
-		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
-	}
+
+		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else
+		handle_debug(regs, debug_status);
 }
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
+#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
 
 #if !defined(CONFIG_TAU_INT)
 void TAUException(struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d84d192..13002fe 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -734,7 +734,7 @@ static int __init vdso_init(void)
 	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		vdso_data->platform |= 1;
-	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->physicalMemorySize = memblock_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;
 	vdso_data->icache_size = ppc64_caches.isize;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 77f6421..00b9436 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/mm.h>
@@ -644,8 +645,10 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
 			found = 1;
 			break;
 		}
-	if (!found)
+	if (!found) {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
 		return;
+	}
 
 	/* Increase/decrease in desired device entitlement */
 	if (desired >= viodev->cmo.desired) {
@@ -704,7 +707,7 @@ static int vio_cmo_bus_probe(struct vio_dev *viodev)
 	 * Check to see that device has a DMA window and configure
 	 * entitlement for the device.
 	 */
-	if (of_get_property(viodev->dev.archdata.of_node,
+	if (of_get_property(viodev->dev.of_node,
 	                    "ibm,my-dma-window", NULL)) {
 		/* Check that the driver is CMO enabled and get desired DMA */
 		if (!viodrv->get_desired_dma) {
@@ -957,9 +960,12 @@ viodev_cmo_rd_attr(allocated);
 
 static ssize_t name_show(struct device *, struct device_attribute *, char *);
 static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf);
 static struct device_attribute vio_cmo_dev_attrs[] = {
 	__ATTR_RO(name),
 	__ATTR_RO(devspec),
+	__ATTR_RO(modalias),
 	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
 	       viodev_cmo_desired_show, viodev_cmo_desired_set),
 	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
@@ -1048,7 +1054,7 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		return vio_build_iommu_table_iseries(dev);
 
-	dma_window = of_get_property(dev->dev.archdata.of_node,
+	dma_window = of_get_property(dev->dev.of_node,
 				  "ibm,my-dma-window", NULL);
 	if (!dma_window)
 		return NULL;
@@ -1057,7 +1063,7 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 	if (tbl == NULL)
 		return NULL;
 
-	of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
+	of_parse_dma_window(dev->dev.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
 
 	/* TCE table size - measured in tce entries */
@@ -1085,7 +1091,7 @@ static const struct vio_device_id *vio_match_device(
 {
 	while (ids->type[0] != '\0') {
 		if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
-		    of_device_is_compatible(dev->dev.archdata.of_node,
+		    of_device_is_compatible(dev->dev.of_node,
 					 ids->compat))
 			return ids;
 		ids++;
@@ -1178,7 +1184,7 @@ EXPORT_SYMBOL(vio_unregister_driver);
 static void __devinit vio_dev_release(struct device *dev)
 {
 	/* XXX should free TCE table */
-	of_node_put(dev->archdata.of_node);
+	of_node_put(dev->of_node);
 	kfree(to_vio_dev(dev));
 }
 
@@ -1229,7 +1235,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 		if (unit_address != NULL)
 			viodev->unit_address = *unit_address;
 	}
-	viodev->dev.archdata.of_node = of_node_get(of_node);
+	viodev->dev.of_node = of_node_get(of_node);
 
 	if (firmware_has_feature(FW_FEATURE_CMO))
 		vio_cmo_set_dma_ops(viodev);
@@ -1314,14 +1320,32 @@ static ssize_t name_show(struct device *dev,
 static ssize_t devspec_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct device_node *of_node = dev->archdata.of_node;
+	struct device_node *of_node = dev->of_node;
 
 	return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none");
 }
 
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	const struct vio_dev *vio_dev = to_vio_dev(dev);
+	struct device_node *dn;
+	const char *cp;
+
+	dn = dev->of_node;
+	if (!dn)
+		return -ENODEV;
+	cp = of_get_property(dn, "compatible", NULL);
+	if (!cp)
+		return -ENODEV;
+
+	return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
+}
+
 static struct device_attribute vio_dev_attrs[] = {
 	__ATTR_RO(name),
 	__ATTR_RO(devspec),
+	__ATTR_RO(modalias),
 	__ATTR_NULL
 };
 
@@ -1346,7 +1370,7 @@ static int vio_hotplug(struct device *dev, struct kobj_uevent_env *env)
 	struct device_node *dn;
 	const char *cp;
 
-	dn = dev->archdata.of_node;
+	dn = dev->of_node;
 	if (!dn)
 		return -ENODEV;
 	cp = of_get_property(dn, "compatible", NULL);
@@ -1364,6 +1388,7 @@ static struct bus_type vio_bus_type = {
 	.match = vio_bus_match,
 	.probe = vio_bus_probe,
 	.remove = vio_bus_remove,
+	.pm = GENERIC_SUBSYS_PM_OPS,
 };
 
 /**
@@ -1377,7 +1402,7 @@ static struct bus_type vio_bus_type = {
 */
 const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
 {
-	return of_get_property(vdev->dev.archdata.of_node, which, length);
+	return of_get_property(vdev->dev.of_node, which, length);
 }
 EXPORT_SYMBOL(vio_get_attribute);
 
diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index f4d1b55..73c0a3f 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 
 #include <asm/reg.h>
@@ -146,7 +147,7 @@ static int __init kvmppc_44x_init(void)
 	if (r)
 		return r;
 
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), 0, THIS_MODULE);
 }
 
 static void __exit kvmppc_44x_exit(void)
diff --git a/arch/powerpc/kvm/44x_emulate.c b/arch/powerpc/kvm/44x_emulate.c
index 61af58f..65ea083 100644
--- a/arch/powerpc/kvm/44x_emulate.c
+++ b/arch/powerpc/kvm/44x_emulate.c
@@ -65,13 +65,14 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 */
 			switch (dcrn) {
 			case DCRN_CPR0_CONFIG_ADDR:
-				vcpu->arch.gpr[rt] = vcpu->arch.cpr0_cfgaddr;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.cpr0_cfgaddr);
 				break;
 			case DCRN_CPR0_CONFIG_DATA:
 				local_irq_disable();
 				mtdcr(DCRN_CPR0_CONFIG_ADDR,
 					  vcpu->arch.cpr0_cfgaddr);
-				vcpu->arch.gpr[rt] = mfdcr(DCRN_CPR0_CONFIG_DATA);
+				kvmppc_set_gpr(vcpu, rt,
+					       mfdcr(DCRN_CPR0_CONFIG_DATA));
 				local_irq_enable();
 				break;
 			default:
@@ -93,11 +94,11 @@ int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			/* emulate some access in kernel */
 			switch (dcrn) {
 			case DCRN_CPR0_CONFIG_ADDR:
-				vcpu->arch.cpr0_cfgaddr = vcpu->arch.gpr[rs];
+				vcpu->arch.cpr0_cfgaddr = kvmppc_get_gpr(vcpu, rs);
 				break;
 			default:
 				run->dcr.dcrn = dcrn;
-				run->dcr.data = vcpu->arch.gpr[rs];
+				run->dcr.data = kvmppc_get_gpr(vcpu, rs);
 				run->dcr.is_write = 1;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
@@ -146,13 +147,13 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 
 	switch (sprn) {
 	case SPRN_PID:
-		kvmppc_set_pid(vcpu, vcpu->arch.gpr[rs]); break;
+		kvmppc_set_pid(vcpu, kvmppc_get_gpr(vcpu, rs)); break;
 	case SPRN_MMUCR:
-		vcpu->arch.mmucr = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.mmucr = kvmppc_get_gpr(vcpu, rs); break;
 	case SPRN_CCR0:
-		vcpu->arch.ccr0 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.ccr0 = kvmppc_get_gpr(vcpu, rs); break;
 	case SPRN_CCR1:
-		vcpu->arch.ccr1 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.ccr1 = kvmppc_get_gpr(vcpu, rs); break;
 	default:
 		emulated = kvmppc_booke_emulate_mtspr(vcpu, sprn, rs);
 	}
@@ -167,13 +168,13 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 
 	switch (sprn) {
 	case SPRN_PID:
-		vcpu->arch.gpr[rt] = vcpu->arch.pid; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.pid); break;
 	case SPRN_MMUCR:
-		vcpu->arch.gpr[rt] = vcpu->arch.mmucr; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.mmucr); break;
 	case SPRN_CCR0:
-		vcpu->arch.gpr[rt] = vcpu->arch.ccr0; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ccr0); break;
 	case SPRN_CCR1:
-		vcpu->arch.gpr[rt] = vcpu->arch.ccr1; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ccr1); break;
 	default:
 		emulated = kvmppc_booke_emulate_mfspr(vcpu, sprn, rt);
 	}
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index ff3cb63..8123125 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -439,8 +439,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 	struct kvmppc_44x_tlbe *tlbe;
 	unsigned int gtlb_index;
 
-	gtlb_index = vcpu->arch.gpr[ra];
-	if (gtlb_index > KVM44x_GUEST_TLB_SIZE) {
+	gtlb_index = kvmppc_get_gpr(vcpu, ra);
+	if (gtlb_index >= KVM44x_GUEST_TLB_SIZE) {
 		printk("%s: index %d\n", __func__, gtlb_index);
 		kvmppc_dump_vcpu(vcpu);
 		return EMULATE_FAIL;
@@ -455,15 +455,15 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 	switch (ws) {
 	case PPC44x_TLB_PAGEID:
 		tlbe->tid = get_mmucr_stid(vcpu);
-		tlbe->word0 = vcpu->arch.gpr[rs];
+		tlbe->word0 = kvmppc_get_gpr(vcpu, rs);
 		break;
 
 	case PPC44x_TLB_XLAT:
-		tlbe->word1 = vcpu->arch.gpr[rs];
+		tlbe->word1 = kvmppc_get_gpr(vcpu, rs);
 		break;
 
 	case PPC44x_TLB_ATTRIB:
-		tlbe->word2 = vcpu->arch.gpr[rs];
+		tlbe->word2 = kvmppc_get_gpr(vcpu, rs);
 		break;
 
 	default:
@@ -500,18 +500,20 @@ int kvmppc_44x_emul_tlbsx(struct kvm_vcpu *vcpu, u8 rt, u8 ra, u8 rb, u8 rc)
 	unsigned int as = get_mmucr_sts(vcpu);
 	unsigned int pid = get_mmucr_stid(vcpu);
 
-	ea = vcpu->arch.gpr[rb];
+	ea = kvmppc_get_gpr(vcpu, rb);
 	if (ra)
-		ea += vcpu->arch.gpr[ra];
+		ea += kvmppc_get_gpr(vcpu, ra);
 
 	gtlb_index = kvmppc_44x_tlb_index(vcpu, ea, pid, as);
 	if (rc) {
+		u32 cr = kvmppc_get_cr(vcpu);
+
 		if (gtlb_index < 0)
-			vcpu->arch.cr &= ~0x20000000;
+			kvmppc_set_cr(vcpu, cr & ~0x20000000);
 		else
-			vcpu->arch.cr |= 0x20000000;
+			kvmppc_set_cr(vcpu, cr | 0x20000000);
 	}
-	vcpu->arch.gpr[rt] = gtlb_index;
+	kvmppc_set_gpr(vcpu, rt, gtlb_index);
 
 	kvmppc_set_exit_type(vcpu, EMULATED_TLBSX_EXITS);
 	return EMULATE_DONE;
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 6fb6e8a..b7baff7 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -20,13 +20,36 @@ config KVM
 	bool
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select KVM_MMIO
+
+config KVM_BOOK3S_HANDLER
+	bool
+
+config KVM_BOOK3S_32_HANDLER
+	bool
+	select KVM_BOOK3S_HANDLER
 
 config KVM_BOOK3S_64_HANDLER
 	bool
+	select KVM_BOOK3S_HANDLER
+
+config KVM_BOOK3S_32
+	tristate "KVM support for PowerPC book3s_32 processors"
+	depends on EXPERIMENTAL && PPC_BOOK3S_32 && !SMP && !PTE_64BIT
+	select KVM
+	select KVM_BOOK3S_32_HANDLER
+	---help---
+	  Support running unmodified book3s_32 guest kernels
+	  in virtual machines on book3s_32 host processors.
+
+	  This module provides access to the hardware capabilities through
+	  a character device node named /dev/kvm.
+
+	  If unsure, say N.
 
 config KVM_BOOK3S_64
 	tristate "KVM support for PowerPC book3s_64 processors"
-	depends on EXPERIMENTAL && PPC64
+	depends on EXPERIMENTAL && PPC_BOOK3S_64
 	select KVM
 	select KVM_BOOK3S_64_HANDLER
 	---help---
@@ -75,6 +98,7 @@ config KVM_E500
 
 	  If unsure, say N.
 
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 56484d6..ff43606 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -14,7 +14,7 @@ CFLAGS_emulate.o  := -I.
 
 common-objs-y += powerpc.o emulate.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
-obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o
+obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o
 
 AFLAGS_booke_interrupts.o := -I$(obj)
 
@@ -40,17 +40,31 @@ kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
 
 kvm-book3s_64-objs := \
 	$(common-objs-y) \
+	fpu.o \
+	book3s_paired_singles.o \
 	book3s.o \
-	book3s_64_emulate.o \
-	book3s_64_interrupts.o \
+	book3s_emulate.o \
+	book3s_interrupts.o \
 	book3s_64_mmu_host.o \
 	book3s_64_mmu.o \
 	book3s_32_mmu.o
 kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs)
 
+kvm-book3s_32-objs := \
+	$(common-objs-y) \
+	fpu.o \
+	book3s_paired_singles.o \
+	book3s.o \
+	book3s_emulate.o \
+	book3s_interrupts.o \
+	book3s_32_mmu_host.o \
+	book3s_32_mmu.o
+kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
+
 kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
 
 obj-$(CONFIG_KVM_440) += kvm.o
 obj-$(CONFIG_KVM_E500) += kvm.o
 obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
 
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 3e294bd..b998abf 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -16,6 +16,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <asm/reg.h>
 #include <asm/cputable.h>
@@ -26,19 +27,26 @@
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
 #include <asm/mmu_context.h>
+#include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/highmem.h>
 
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
 /* #define EXIT_DEBUG */
 /* #define EXIT_DEBUG_SIMPLE */
+/* #define DEBUG_EXT */
 
-/* Without AGGRESSIVE_DEC we only fire off a DEC interrupt when DEC turns 0.
- * When set, we retrigger a DEC interrupt after that if DEC <= 0.
- * PPC32 Linux runs faster without AGGRESSIVE_DEC, PPC64 Linux requires it. */
+static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
+			     ulong msr);
 
-/* #define AGGRESSIVE_DEC */
+/* Some compatibility defines */
+#ifdef CONFIG_PPC_BOOK3S_32
+#define MSR_USER32 MSR_USER
+#define MSR_USER64 MSR_USER
+#define HW_PAGE_SIZE PAGE_SIZE
+#endif
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exits",       VCPU_STAT(sum_exits) },
@@ -71,17 +79,33 @@ void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
 
 void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
-	memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb));
-	get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max;
+#ifdef CONFIG_PPC_BOOK3S_64
+	memcpy(to_svcpu(vcpu)->slb, to_book3s(vcpu)->slb_shadow, sizeof(to_svcpu(vcpu)->slb));
+	memcpy(&get_paca()->shadow_vcpu, to_book3s(vcpu)->shadow_vcpu,
+	       sizeof(get_paca()->shadow_vcpu));
+	to_svcpu(vcpu)->slb_max = to_book3s(vcpu)->slb_shadow_max;
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	current->thread.kvm_shadow_vcpu = to_book3s(vcpu)->shadow_vcpu;
+#endif
 }
 
 void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb));
-	to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max;
+#ifdef CONFIG_PPC_BOOK3S_64
+	memcpy(to_book3s(vcpu)->slb_shadow, to_svcpu(vcpu)->slb, sizeof(to_svcpu(vcpu)->slb));
+	memcpy(to_book3s(vcpu)->shadow_vcpu, &get_paca()->shadow_vcpu,
+	       sizeof(get_paca()->shadow_vcpu));
+	to_book3s(vcpu)->slb_shadow_max = to_svcpu(vcpu)->slb_max;
+#endif
+
+	kvmppc_giveup_ext(vcpu, MSR_FP);
+	kvmppc_giveup_ext(vcpu, MSR_VEC);
+	kvmppc_giveup_ext(vcpu, MSR_VSX);
 }
 
-#if defined(AGGRESSIVE_DEC) || defined(EXIT_DEBUG)
+#if defined(EXIT_DEBUG)
 static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu)
 {
 	u64 jd = mftb() - vcpu->arch.dec_jiffies;
@@ -89,6 +113,23 @@ static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu)
 }
 #endif
 
+static void kvmppc_recalc_shadow_msr(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.shadow_msr = vcpu->arch.msr;
+	/* Guest MSR values */
+	vcpu->arch.shadow_msr &= MSR_FE0 | MSR_FE1 | MSR_SF | MSR_SE |
+				 MSR_BE | MSR_DE;
+	/* Process MSR values */
+	vcpu->arch.shadow_msr |= MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_PR |
+				 MSR_EE;
+	/* External providers the guest reserved */
+	vcpu->arch.shadow_msr |= (vcpu->arch.msr & vcpu->arch.guest_owned_ext);
+	/* 64-bit Process MSR values */
+#ifdef CONFIG_PPC_BOOK3S_64
+	vcpu->arch.shadow_msr |= MSR_ISF | MSR_HV;
+#endif
+}
+
 void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
 {
 	ulong old_msr = vcpu->arch.msr;
@@ -96,12 +137,10 @@ void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
 #ifdef EXIT_DEBUG
 	printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr);
 #endif
+
 	msr &= to_book3s(vcpu)->msr_mask;
 	vcpu->arch.msr = msr;
-	vcpu->arch.shadow_msr = msr | MSR_USER32;
-	vcpu->arch.shadow_msr &= ( MSR_VEC | MSR_VSX | MSR_FP | MSR_FE0 |
-				   MSR_USER64 | MSR_SE | MSR_BE | MSR_DE |
-				   MSR_FE1);
+	kvmppc_recalc_shadow_msr(vcpu);
 
 	if (msr & (MSR_WE|MSR_POW)) {
 		if (!vcpu->arch.pending_exceptions) {
@@ -110,26 +149,29 @@ void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
 		}
 	}
 
-	if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
-	    (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+	if ((vcpu->arch.msr & (MSR_PR|MSR_IR|MSR_DR)) !=
+		   (old_msr & (MSR_PR|MSR_IR|MSR_DR))) {
 		kvmppc_mmu_flush_segments(vcpu);
-		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+		kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
 	}
+
+	/* Preload FPU if it's enabled */
+	if (vcpu->arch.msr & MSR_FP)
+		kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP);
 }
 
 void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags)
 {
-	vcpu->arch.srr0 = vcpu->arch.pc;
+	vcpu->arch.srr0 = kvmppc_get_pc(vcpu);
 	vcpu->arch.srr1 = vcpu->arch.msr | flags;
-	vcpu->arch.pc = to_book3s(vcpu)->hior + vec;
+	kvmppc_set_pc(vcpu, to_book3s(vcpu)->hior + vec);
 	vcpu->arch.mmu.reset_msr(vcpu);
 }
 
-void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
+static int kvmppc_book3s_vec2irqprio(unsigned int vec)
 {
 	unsigned int prio;
 
-	vcpu->stat.queue_intr++;
 	switch (vec) {
 	case 0x100: prio = BOOK3S_IRQPRIO_SYSTEM_RESET;		break;
 	case 0x200: prio = BOOK3S_IRQPRIO_MACHINE_CHECK;	break;
@@ -149,15 +191,31 @@ void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
 	default:    prio = BOOK3S_IRQPRIO_MAX;			break;
 	}
 
-	set_bit(prio, &vcpu->arch.pending_exceptions);
+	return prio;
+}
+
+static void kvmppc_book3s_dequeue_irqprio(struct kvm_vcpu *vcpu,
+					  unsigned int vec)
+{
+	clear_bit(kvmppc_book3s_vec2irqprio(vec),
+		  &vcpu->arch.pending_exceptions);
+}
+
+void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
+{
+	vcpu->stat.queue_intr++;
+
+	set_bit(kvmppc_book3s_vec2irqprio(vec),
+		&vcpu->arch.pending_exceptions);
 #ifdef EXIT_DEBUG
 	printk(KERN_INFO "Queueing interrupt %x\n", vec);
 #endif
 }
 
 
-void kvmppc_core_queue_program(struct kvm_vcpu *vcpu)
+void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong flags)
 {
+	to_book3s(vcpu)->prog_flags = flags;
 	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_PROGRAM);
 }
 
@@ -171,16 +229,28 @@ int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
 	return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
 }
 
+void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu)
+{
+	kvmppc_book3s_dequeue_irqprio(vcpu, BOOK3S_INTERRUPT_DECREMENTER);
+}
+
 void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                 struct kvm_interrupt *irq)
 {
 	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	kvmppc_book3s_dequeue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
 int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 {
 	int deliver = 1;
 	int vec = 0;
+	ulong flags = 0ULL;
 
 	switch (priority) {
 	case BOOK3S_IRQPRIO_DECREMENTER:
@@ -214,6 +284,7 @@ int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 		break;
 	case BOOK3S_IRQPRIO_PROGRAM:
 		vec = BOOK3S_INTERRUPT_PROGRAM;
+		flags = to_book3s(vcpu)->prog_flags;
 		break;
 	case BOOK3S_IRQPRIO_VSX:
 		vec = BOOK3S_INTERRUPT_VSX;
@@ -244,7 +315,7 @@ int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 #endif
 
 	if (deliver)
-		kvmppc_inject_interrupt(vcpu, vec, 0ULL);
+		kvmppc_inject_interrupt(vcpu, vec, flags);
 
 	return deliver;
 }
@@ -254,21 +325,15 @@ void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
 	unsigned long *pending = &vcpu->arch.pending_exceptions;
 	unsigned int priority;
 
-	/* XXX be more clever here - no need to mftb() on every entry */
-	/* Issue DEC again if it's still active */
-#ifdef AGGRESSIVE_DEC
-	if (vcpu->arch.msr & MSR_EE)
-		if (kvmppc_get_dec(vcpu) & 0x80000000)
-			kvmppc_core_queue_dec(vcpu);
-#endif
-
 #ifdef EXIT_DEBUG
 	if (vcpu->arch.pending_exceptions)
 		printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
 #endif
 	priority = __ffs(*pending);
-	while (priority <= (sizeof(unsigned int) * 8)) {
-		if (kvmppc_book3s_irqprio_deliver(vcpu, priority)) {
+	while (priority < BOOK3S_IRQPRIO_MAX) {
+		if (kvmppc_book3s_irqprio_deliver(vcpu, priority) &&
+		    (priority != BOOK3S_IRQPRIO_DECREMENTER)) {
+			/* DEC interrupts get cleared by mtdec */
 			clear_bit(priority, &vcpu->arch.pending_exceptions);
 			break;
 		}
@@ -281,13 +346,18 @@ void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
 
 void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 {
+	u32 host_pvr;
+
 	vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB;
 	vcpu->arch.pvr = pvr;
+#ifdef CONFIG_PPC_BOOK3S_64
 	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
 		kvmppc_mmu_book3s_64_init(vcpu);
 		to_book3s(vcpu)->hior = 0xfff00000;
 		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
-	} else {
+	} else
+#endif
+	{
 		kvmppc_mmu_book3s_32_init(vcpu);
 		to_book3s(vcpu)->hior = 0;
 		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
@@ -300,6 +370,32 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 	    !strcmp(cur_cpu_spec->platform, "ppc970"))
 		vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
 
+	/* Cell performs badly if MSR_FEx are set. So let's hope nobody
+	   really needs them in a VM on Cell and force disable them. */
+	if (!strcmp(cur_cpu_spec->platform, "ppc-cell-be"))
+		to_book3s(vcpu)->msr_mask &= ~(MSR_FE0 | MSR_FE1);
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	/* 32 bit Book3S always has 32 byte dcbz */
+	vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+#endif
+
+	/* On some CPUs we can execute paired single operations natively */
+	asm ( "mfpvr %0" : "=r"(host_pvr));
+	switch (host_pvr) {
+	case 0x00080200:	/* lonestar 2.0 */
+	case 0x00088202:	/* lonestar 2.2 */
+	case 0x70000100:	/* gekko 1.0 */
+	case 0x00080100:	/* gekko 2.0 */
+	case 0x00083203:	/* gekko 2.3a */
+	case 0x00083213:	/* gekko 2.3b */
+	case 0x00083204:	/* gekko 2.4 */
+	case 0x00083214:	/* gekko 2.4e (8SE) - retail HW2 */
+	case 0x00087200:	/* broadway */
+		vcpu->arch.hflags |= BOOK3S_HFLAG_NATIVE_PS;
+		/* Enable HID2.PSE - in case we need it later */
+		mtspr(SPRN_HID2_GEKKO, mfspr(SPRN_HID2_GEKKO) | (1 << 29));
+	}
 }
 
 /* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
@@ -313,34 +409,29 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
  */
 static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 {
-	bool touched = false;
-	hva_t hpage;
+	struct page *hpage;
+	u64 hpage_offset;
 	u32 *page;
 	int i;
 
-	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
-	if (kvm_is_error_hva(hpage))
+	hpage = gfn_to_page(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (is_error_page(hpage))
 		return;
 
-	hpage |= pte->raddr & ~PAGE_MASK;
-	hpage &= ~0xFFFULL;
+	hpage_offset = pte->raddr & ~PAGE_MASK;
+	hpage_offset &= ~0xFFFULL;
+	hpage_offset /= 4;
 
-	page = vmalloc(HW_PAGE_SIZE);
+	get_page(hpage);
+	page = kmap_atomic(hpage, KM_USER0);
 
-	if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
-		goto out;
-
-	for (i=0; i < HW_PAGE_SIZE / 4; i++)
-		if ((page[i] & 0xff0007ff) == INS_DCBZ) {
-			page[i] &= 0xfffffff7; // reserved instruction, so we trap
-			touched = true;
-		}
-
-	if (touched)
-		copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+	/* patch dcbz into reserved instruction, so we trap */
+	for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++)
+		if ((page[i] & 0xff0007ff) == INS_DCBZ)
+			page[i] &= 0xfffffff7;
 
-out:
-	vfree(page);
+	kunmap_atomic(page, KM_USER0);
+	put_page(hpage);
 }
 
 static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
@@ -354,15 +445,7 @@ static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
 	} else {
 		pte->eaddr = eaddr;
 		pte->raddr = eaddr & 0xffffffff;
-		pte->vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte->vpage |= VSID_REAL;
-		case MSR_DR:
-			pte->vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte->vpage |= VSID_REAL_IR;
-		}
+		pte->vpage = VSID_REAL | eaddr >> 12;
 		pte->may_read = true;
 		pte->may_write = true;
 		pte->may_execute = true;
@@ -397,55 +480,55 @@ err:
 	return kvmppc_bad_hva();
 }
 
-int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr)
+int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
+	      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = eaddr;
 
 	vcpu->stat.st++;
 
-	if (kvmppc_xlate(vcpu, eaddr, false, &pte))
-		goto err;
+	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
+		return -ENOENT;
 
-	hva = kvmppc_pte_to_hva(vcpu, &pte, false);
-	if (kvm_is_error_hva(hva))
-		goto err;
+	*eaddr = pte.raddr;
 
-	if (copy_to_user((void __user *)hva, ptr, size)) {
-		printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
-		goto err;
-	}
+	if (!pte.may_write)
+		return -EPERM;
 
-	return 0;
+	if (kvm_write_guest(vcpu->kvm, pte.raddr, ptr, size))
+		return EMULATE_DO_MMIO;
 
-err:
-	return -ENOENT;
+	return EMULATE_DONE;
 }
 
-int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr,
+int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
 		      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = eaddr;
+	hva_t hva = *eaddr;
 
 	vcpu->stat.ld++;
 
-	if (kvmppc_xlate(vcpu, eaddr, data, &pte))
-		goto err;
+	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
+		goto nopte;
+
+	*eaddr = pte.raddr;
 
 	hva = kvmppc_pte_to_hva(vcpu, &pte, true);
 	if (kvm_is_error_hva(hva))
-		goto err;
+		goto mmio;
 
 	if (copy_from_user(ptr, (void __user *)hva, size)) {
 		printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva);
-		goto err;
+		goto mmio;
 	}
 
-	return 0;
+	return EMULATE_DONE;
 
-err:
+nopte:
 	return -ENOENT;
+mmio:
+	return EMULATE_DO_MMIO;
 }
 
 static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn)
@@ -462,12 +545,11 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	int page_found = 0;
 	struct kvmppc_pte pte;
 	bool is_mmio = false;
+	bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+	bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
+	u64 vsid;
 
-	if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
-		relocated = (vcpu->arch.msr & MSR_DR);
-	} else {
-		relocated = (vcpu->arch.msr & MSR_IR);
-	}
+	relocated = data ? dr : ir;
 
 	/* Resolve real address if translation turned on */
 	if (relocated) {
@@ -479,14 +561,25 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		pte.raddr = eaddr & 0xffffffff;
 		pte.eaddr = eaddr;
 		pte.vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte.vpage |= VSID_REAL;
-		case MSR_DR:
-			pte.vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte.vpage |= VSID_REAL_IR;
-		}
+	}
+
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		pte.vpage |= ((u64)VSID_REAL << (SID_SHIFT - 12));
+		break;
+	case MSR_DR:
+	case MSR_IR:
+		vcpu->arch.mmu.esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+
+		if ((vcpu->arch.msr & (MSR_DR|MSR_IR)) == MSR_DR)
+			pte.vpage |= ((u64)VSID_REAL_DR << (SID_SHIFT - 12));
+		else
+			pte.vpage |= ((u64)VSID_REAL_IR << (SID_SHIFT - 12));
+		pte.vpage |= vsid;
+
+		if (vsid == -1)
+			page_found = -EINVAL;
+		break;
 	}
 
 	if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
@@ -501,20 +594,20 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 	if (page_found == -ENOENT) {
 		/* Page not found in guest PTE entries */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
-		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
-		vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
+		to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr;
+		vcpu->arch.msr |= (to_svcpu(vcpu)->shadow_srr1 & 0x00000000f8000000ULL);
 		kvmppc_book3s_queue_irqprio(vcpu, vec);
 	} else if (page_found == -EPERM) {
 		/* Storage protection */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
-		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE;
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
+		to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr & ~DSISR_NOHPTE;
 		to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT;
-		vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+		vcpu->arch.msr |= (to_svcpu(vcpu)->shadow_srr1 & 0x00000000f8000000ULL);
 		kvmppc_book3s_queue_irqprio(vcpu, vec);
 	} else if (page_found == -EINVAL) {
 		/* Page not found in guest SLB */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
 		kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80);
 	} else if (!is_mmio &&
 		   kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) {
@@ -532,13 +625,168 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		r = kvmppc_emulate_mmio(run, vcpu);
 		if ( r == RESUME_HOST_NV )
 			r = RESUME_HOST;
-		if ( r == RESUME_GUEST_NV )
-			r = RESUME_GUEST;
 	}
 
 	return r;
 }
 
+static inline int get_fpr_index(int i)
+{
+#ifdef CONFIG_VSX
+	i *= 2;
+#endif
+	return i;
+}
+
+/* Give up external provider (FPU, Altivec, VSX) */
+void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
+{
+	struct thread_struct *t = &current->thread;
+	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
+	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
+	u64 *thread_fpr = (u64*)t->fpr;
+	int i;
+
+	if (!(vcpu->arch.guest_owned_ext & msr))
+		return;
+
+#ifdef DEBUG_EXT
+	printk(KERN_INFO "Giving up ext 0x%lx\n", msr);
+#endif
+
+	switch (msr) {
+	case MSR_FP:
+		giveup_fpu(current);
+		for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++)
+			vcpu_fpr[i] = thread_fpr[get_fpr_index(i)];
+
+		vcpu->arch.fpscr = t->fpscr.val;
+		break;
+	case MSR_VEC:
+#ifdef CONFIG_ALTIVEC
+		giveup_altivec(current);
+		memcpy(vcpu->arch.vr, t->vr, sizeof(vcpu->arch.vr));
+		vcpu->arch.vscr = t->vscr;
+#endif
+		break;
+	case MSR_VSX:
+#ifdef CONFIG_VSX
+		__giveup_vsx(current);
+		for (i = 0; i < ARRAY_SIZE(vcpu->arch.vsr); i++)
+			vcpu_vsx[i] = thread_fpr[get_fpr_index(i) + 1];
+#endif
+		break;
+	default:
+		BUG();
+	}
+
+	vcpu->arch.guest_owned_ext &= ~msr;
+	current->thread.regs->msr &= ~msr;
+	kvmppc_recalc_shadow_msr(vcpu);
+}
+
+static int kvmppc_read_inst(struct kvm_vcpu *vcpu)
+{
+	ulong srr0 = kvmppc_get_pc(vcpu);
+	u32 last_inst = kvmppc_get_last_inst(vcpu);
+	int ret;
+
+	ret = kvmppc_ld(vcpu, &srr0, sizeof(u32), &last_inst, false);
+	if (ret == -ENOENT) {
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 33, 1);
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 34, 36, 0);
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
+		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_INST_STORAGE);
+		return EMULATE_AGAIN;
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+{
+
+	/* Need to do paired single emulation? */
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return EMULATE_DONE;
+
+	/* Read out the instruction */
+	if (kvmppc_read_inst(vcpu) == EMULATE_DONE)
+		/* Need to emulate */
+		return EMULATE_FAIL;
+
+	return EMULATE_AGAIN;
+}
+
+/* Handle external providers (FPU, Altivec, VSX) */
+static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
+			     ulong msr)
+{
+	struct thread_struct *t = &current->thread;
+	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
+	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
+	u64 *thread_fpr = (u64*)t->fpr;
+	int i;
+
+	/* When we have paired singles, we emulate in software */
+	if (vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE)
+		return RESUME_GUEST;
+
+	if (!(vcpu->arch.msr & msr)) {
+		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		return RESUME_GUEST;
+	}
+
+	/* We already own the ext */
+	if (vcpu->arch.guest_owned_ext & msr) {
+		return RESUME_GUEST;
+	}
+
+#ifdef DEBUG_EXT
+	printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
+#endif
+
+	current->thread.regs->msr |= msr;
+
+	switch (msr) {
+	case MSR_FP:
+		for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++)
+			thread_fpr[get_fpr_index(i)] = vcpu_fpr[i];
+
+		t->fpscr.val = vcpu->arch.fpscr;
+		t->fpexc_mode = 0;
+		kvmppc_load_up_fpu();
+		break;
+	case MSR_VEC:
+#ifdef CONFIG_ALTIVEC
+		memcpy(t->vr, vcpu->arch.vr, sizeof(vcpu->arch.vr));
+		t->vscr = vcpu->arch.vscr;
+		t->vrsave = -1;
+		kvmppc_load_up_altivec();
+#endif
+		break;
+	case MSR_VSX:
+#ifdef CONFIG_VSX
+		for (i = 0; i < ARRAY_SIZE(vcpu->arch.vsr); i++)
+			thread_fpr[get_fpr_index(i) + 1] = vcpu_vsx[i];
+		kvmppc_load_up_vsx();
+#endif
+		break;
+	default:
+		BUG();
+	}
+
+	vcpu->arch.guest_owned_ext |= msr;
+
+	kvmppc_recalc_shadow_msr(vcpu);
+
+	return RESUME_GUEST;
+}
+
 int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
                        unsigned int exit_nr)
 {
@@ -550,21 +798,33 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	run->ready_for_interrupt_injection = 1;
 #ifdef EXIT_DEBUG
 	printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n",
-		exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
-		kvmppc_get_dec(vcpu), vcpu->arch.msr);
+		exit_nr, kvmppc_get_pc(vcpu), kvmppc_get_fault_dar(vcpu),
+		kvmppc_get_dec(vcpu), to_svcpu(vcpu)->shadow_srr1);
 #elif defined (EXIT_DEBUG_SIMPLE)
 	if ((exit_nr != 0x900) && (exit_nr != 0x500))
 		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n",
-			exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+			exit_nr, kvmppc_get_pc(vcpu), kvmppc_get_fault_dar(vcpu),
 			vcpu->arch.msr);
 #endif
 	kvm_resched(vcpu);
 	switch (exit_nr) {
 	case BOOK3S_INTERRUPT_INST_STORAGE:
 		vcpu->stat.pf_instruc++;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+		/* We set segments as unused segments when invalidating them. So
+		 * treat the respective fault as segment fault. */
+		if (to_svcpu(vcpu)->sr[kvmppc_get_pc(vcpu) >> SID_SHIFT]
+		    == SR_INVALID) {
+			kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
+			r = RESUME_GUEST;
+			break;
+		}
+#endif
+
 		/* only care about PTEG not found errors, but leave NX alone */
-		if (vcpu->arch.shadow_msr & 0x40000000) {
-			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr);
+		if (to_svcpu(vcpu)->shadow_srr1 & 0x40000000) {
+			r = kvmppc_handle_pagefault(run, vcpu, kvmppc_get_pc(vcpu), exit_nr);
 			vcpu->stat.sp_instruc++;
 		} else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
 			  (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
@@ -573,37 +833,52 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			 *     so we can't use the NX bit inside the guest. Let's cross our fingers,
 			 *     that no guest that needs the dcbz hack does NX.
 			 */
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, kvmppc_get_pc(vcpu), ~0xFFFUL);
+			r = RESUME_GUEST;
 		} else {
-			vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x58000000);
+			vcpu->arch.msr |= to_svcpu(vcpu)->shadow_srr1 & 0x58000000;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, kvmppc_get_pc(vcpu), ~0xFFFUL);
 			r = RESUME_GUEST;
 		}
 		break;
 	case BOOK3S_INTERRUPT_DATA_STORAGE:
+	{
+		ulong dar = kvmppc_get_fault_dar(vcpu);
 		vcpu->stat.pf_storage++;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+		/* We set segments as unused segments when invalidating them. So
+		 * treat the respective fault as segment fault. */
+		if ((to_svcpu(vcpu)->sr[dar >> SID_SHIFT]) == SR_INVALID) {
+			kvmppc_mmu_map_segment(vcpu, dar);
+			r = RESUME_GUEST;
+			break;
+		}
+#endif
+
 		/* The only case we need to handle is missing shadow PTEs */
-		if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) {
-			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr);
+		if (to_svcpu(vcpu)->fault_dsisr & DSISR_NOHPTE) {
+			r = kvmppc_handle_pagefault(run, vcpu, dar, exit_nr);
 		} else {
-			vcpu->arch.dear = vcpu->arch.fault_dear;
-			to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+			vcpu->arch.dear = dar;
+			to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFUL);
 			r = RESUME_GUEST;
 		}
 		break;
+	}
 	case BOOK3S_INTERRUPT_DATA_SEGMENT:
-		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) {
-			vcpu->arch.dear = vcpu->arch.fault_dear;
+		if (kvmppc_mmu_map_segment(vcpu, kvmppc_get_fault_dar(vcpu)) < 0) {
+			vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
 			kvmppc_book3s_queue_irqprio(vcpu,
 				BOOK3S_INTERRUPT_DATA_SEGMENT);
 		}
 		r = RESUME_GUEST;
 		break;
 	case BOOK3S_INTERRUPT_INST_SEGMENT:
-		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) {
+		if (kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu)) < 0) {
 			kvmppc_book3s_queue_irqprio(vcpu,
 				BOOK3S_INTERRUPT_INST_SEGMENT);
 		}
@@ -618,17 +893,24 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		vcpu->stat.ext_intr_exits++;
 		r = RESUME_GUEST;
 		break;
+	case BOOK3S_INTERRUPT_PERFMON:
+		r = RESUME_GUEST;
+		break;
 	case BOOK3S_INTERRUPT_PROGRAM:
 	{
 		enum emulation_result er;
+		ulong flags;
+
+program_interrupt:
+		flags = to_svcpu(vcpu)->shadow_srr1 & 0x1f0000ull;
 
 		if (vcpu->arch.msr & MSR_PR) {
 #ifdef EXIT_DEBUG
-			printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst);
+			printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", kvmppc_get_pc(vcpu), kvmppc_get_last_inst(vcpu));
 #endif
-			if ((vcpu->arch.last_inst & 0xff0007ff) !=
+			if ((kvmppc_get_last_inst(vcpu) & 0xff0007ff) !=
 			    (INS_DCBZ & 0xfffffff7)) {
-				kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+				kvmppc_core_queue_program(vcpu, flags);
 				r = RESUME_GUEST;
 				break;
 			}
@@ -638,38 +920,92 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		er = kvmppc_emulate_instruction(run, vcpu);
 		switch (er) {
 		case EMULATE_DONE:
+			r = RESUME_GUEST_NV;
+			break;
+		case EMULATE_AGAIN:
 			r = RESUME_GUEST;
 			break;
 		case EMULATE_FAIL:
 			printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
-			       __func__, vcpu->arch.pc, vcpu->arch.last_inst);
-			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			       __func__, kvmppc_get_pc(vcpu), kvmppc_get_last_inst(vcpu));
+			kvmppc_core_queue_program(vcpu, flags);
 			r = RESUME_GUEST;
 			break;
+		case EMULATE_DO_MMIO:
+			run->exit_reason = KVM_EXIT_MMIO;
+			r = RESUME_HOST_NV;
+			break;
 		default:
 			BUG();
 		}
 		break;
 	}
 	case BOOK3S_INTERRUPT_SYSCALL:
-#ifdef EXIT_DEBUG
-		printk(KERN_INFO "Syscall Nr %d\n", (int)vcpu->arch.gpr[0]);
-#endif
-		vcpu->stat.syscall_exits++;
-		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-		r = RESUME_GUEST;
+		// XXX make user settable
+		if (vcpu->arch.osi_enabled &&
+		    (((u32)kvmppc_get_gpr(vcpu, 3)) == OSI_SC_MAGIC_R3) &&
+		    (((u32)kvmppc_get_gpr(vcpu, 4)) == OSI_SC_MAGIC_R4)) {
+			u64 *gprs = run->osi.gprs;
+			int i;
+
+			run->exit_reason = KVM_EXIT_OSI;
+			for (i = 0; i < 32; i++)
+				gprs[i] = kvmppc_get_gpr(vcpu, i);
+			vcpu->arch.osi_needed = 1;
+			r = RESUME_HOST_NV;
+
+		} else {
+			vcpu->stat.syscall_exits++;
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			r = RESUME_GUEST;
+		}
 		break;
-	case BOOK3S_INTERRUPT_MACHINE_CHECK:
 	case BOOK3S_INTERRUPT_FP_UNAVAIL:
-	case BOOK3S_INTERRUPT_TRACE:
 	case BOOK3S_INTERRUPT_ALTIVEC:
 	case BOOK3S_INTERRUPT_VSX:
+	{
+		int ext_msr = 0;
+
+		switch (exit_nr) {
+		case BOOK3S_INTERRUPT_FP_UNAVAIL: ext_msr = MSR_FP;  break;
+		case BOOK3S_INTERRUPT_ALTIVEC:    ext_msr = MSR_VEC; break;
+		case BOOK3S_INTERRUPT_VSX:        ext_msr = MSR_VSX; break;
+		}
+
+		switch (kvmppc_check_ext(vcpu, exit_nr)) {
+		case EMULATE_DONE:
+			/* everything ok - let's enable the ext */
+			r = kvmppc_handle_ext(vcpu, exit_nr, ext_msr);
+			break;
+		case EMULATE_FAIL:
+			/* we need to emulate this instruction */
+			goto program_interrupt;
+			break;
+		default:
+			/* nothing to worry about - go again */
+			break;
+		}
+		break;
+	}
+	case BOOK3S_INTERRUPT_ALIGNMENT:
+		if (kvmppc_read_inst(vcpu) == EMULATE_DONE) {
+			to_book3s(vcpu)->dsisr = kvmppc_alignment_dsisr(vcpu,
+				kvmppc_get_last_inst(vcpu));
+			vcpu->arch.dear = kvmppc_alignment_dar(vcpu,
+				kvmppc_get_last_inst(vcpu));
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		}
+		r = RESUME_GUEST;
+		break;
+	case BOOK3S_INTERRUPT_MACHINE_CHECK:
+	case BOOK3S_INTERRUPT_TRACE:
 		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
 		r = RESUME_GUEST;
 		break;
 	default:
 		/* Ugh - bork here! What did we get? */
-		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", exit_nr, vcpu->arch.pc, vcpu->arch.shadow_msr);
+		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n",
+			exit_nr, kvmppc_get_pc(vcpu), to_svcpu(vcpu)->shadow_srr1);
 		r = RESUME_HOST;
 		BUG();
 		break;
@@ -696,7 +1032,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	}
 
 #ifdef EXIT_DEBUG
-	printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r);
+	printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, kvmppc_get_pc(vcpu), r);
 #endif
 
 	return r;
@@ -711,11 +1047,13 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	regs->pc = vcpu->arch.pc;
-	regs->cr = vcpu->arch.cr;
-	regs->ctr = vcpu->arch.ctr;
-	regs->lr = vcpu->arch.lr;
-	regs->xer = vcpu->arch.xer;
+	vcpu_load(vcpu);
+
+	regs->pc = kvmppc_get_pc(vcpu);
+	regs->cr = kvmppc_get_cr(vcpu);
+	regs->ctr = kvmppc_get_ctr(vcpu);
+	regs->lr = kvmppc_get_lr(vcpu);
+	regs->xer = kvmppc_get_xer(vcpu);
 	regs->msr = vcpu->arch.msr;
 	regs->srr0 = vcpu->arch.srr0;
 	regs->srr1 = vcpu->arch.srr1;
@@ -729,7 +1067,9 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	regs->sprg7 = vcpu->arch.sprg6;
 
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
-		regs->gpr[i] = vcpu->arch.gpr[i];
+		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
+
+	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -738,11 +1078,13 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
-	vcpu->arch.pc = regs->pc;
-	vcpu->arch.cr = regs->cr;
-	vcpu->arch.ctr = regs->ctr;
-	vcpu->arch.lr = regs->lr;
-	vcpu->arch.xer = regs->xer;
+	vcpu_load(vcpu);
+
+	kvmppc_set_pc(vcpu, regs->pc);
+	kvmppc_set_cr(vcpu, regs->cr);
+	kvmppc_set_ctr(vcpu, regs->ctr);
+	kvmppc_set_lr(vcpu, regs->lr);
+	kvmppc_set_xer(vcpu, regs->xer);
 	kvmppc_set_msr(vcpu, regs->msr);
 	vcpu->arch.srr0 = regs->srr0;
 	vcpu->arch.srr1 = regs->srr1;
@@ -754,8 +1096,10 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	vcpu->arch.sprg6 = regs->sprg5;
 	vcpu->arch.sprg7 = regs->sprg6;
 
-	for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++)
-		vcpu->arch.gpr[i] = regs->gpr[i];
+	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
+		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
+
+	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -766,6 +1110,8 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
+	vcpu_load(vcpu);
+
 	sregs->pvr = vcpu->arch.pvr;
 
 	sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
@@ -784,6 +1130,9 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 			sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw;
 		}
 	}
+
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -793,6 +1142,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
+	vcpu_load(vcpu);
+
 	kvmppc_set_pvr(vcpu, sregs->pvr);
 
 	vcpu3s->sdr1 = sregs->u.s.sdr1;
@@ -819,6 +1170,9 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -848,9 +1202,10 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	struct kvm_vcpu *vcpu;
 	ulong ga, ga_end;
 	int is_dirty = 0;
-	int r, n;
+	int r;
+	unsigned long n;
 
-	down_write(&kvm->slots_lock);
+	mutex_lock(&kvm->slots_lock);
 
 	r = kvm_get_dirty_log(kvm, log, &is_dirty);
 	if (r)
@@ -858,7 +1213,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
-		memslot = &kvm->memslots[log->slot];
+		memslot = &kvm->memslots->memslots[log->slot];
 
 		ga = memslot->base_gfn << PAGE_SHIFT;
 		ga_end = ga + (memslot->npages << PAGE_SHIFT);
@@ -866,13 +1221,13 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		kvm_for_each_vcpu(n, vcpu, kvm)
 			kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
 
-		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+		n = kvm_dirty_bitmap_bytes(memslot);
 		memset(memslot->dirty_bitmap, 0, n);
 	}
 
 	r = 0;
 out:
-	up_write(&kvm->slots_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return r;
 }
 
@@ -885,24 +1240,33 @@ struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s;
 	struct kvm_vcpu *vcpu;
-	int err;
+	int err = -ENOMEM;
 
-	vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO,
-			get_order(sizeof(struct kvmppc_vcpu_book3s)));
-	if (!vcpu_book3s) {
-		err = -ENOMEM;
+	vcpu_book3s = vmalloc(sizeof(struct kvmppc_vcpu_book3s));
+	if (!vcpu_book3s)
 		goto out;
-	}
+
+	memset(vcpu_book3s, 0, sizeof(struct kvmppc_vcpu_book3s));
+
+	vcpu_book3s->shadow_vcpu = (struct kvmppc_book3s_shadow_vcpu *)
+		kzalloc(sizeof(*vcpu_book3s->shadow_vcpu), GFP_KERNEL);
+	if (!vcpu_book3s->shadow_vcpu)
+		goto free_vcpu;
 
 	vcpu = &vcpu_book3s->vcpu;
 	err = kvm_vcpu_init(vcpu, kvm, id);
 	if (err)
-		goto free_vcpu;
+		goto free_shadow_vcpu;
 
 	vcpu->arch.host_retip = kvm_return_point;
 	vcpu->arch.host_msr = mfmsr();
+#ifdef CONFIG_PPC_BOOK3S_64
 	/* default to book3s_64 (970fx) */
 	vcpu->arch.pvr = 0x3C0301;
+#else
+	/* default to book3s_32 (750) */
+	vcpu->arch.pvr = 0x84202;
+#endif
 	kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
 	vcpu_book3s->slb_nr = 64;
 
@@ -910,22 +1274,24 @@ struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
 	vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem;
 	vcpu->arch.trampoline_enter = kvmppc_trampoline_enter;
 	vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
+#ifdef CONFIG_PPC_BOOK3S_64
+	vcpu->arch.rmcall = *(ulong*)kvmppc_rmcall;
+#else
+	vcpu->arch.rmcall = (ulong)kvmppc_rmcall;
+#endif
 
 	vcpu->arch.shadow_msr = MSR_USER64;
 
-	err = __init_new_context();
+	err = kvmppc_mmu_init(vcpu);
 	if (err < 0)
-		goto free_vcpu;
-	vcpu_book3s->context_id = err;
-
-	vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1;
-	vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS;
-	vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+		goto free_shadow_vcpu;
 
 	return vcpu;
 
+free_shadow_vcpu:
+	kfree(vcpu_book3s->shadow_vcpu);
 free_vcpu:
-	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+	vfree(vcpu_book3s);
 out:
 	return ERR_PTR(err);
 }
@@ -934,15 +1300,23 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
 
-	__destroy_context(vcpu_book3s->context_id);
 	kvm_vcpu_uninit(vcpu);
-	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+	kfree(vcpu_book3s->shadow_vcpu);
+	vfree(vcpu_book3s);
 }
 
 extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
 int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
 	int ret;
+	struct thread_struct ext_bkp;
+#ifdef CONFIG_ALTIVEC
+	bool save_vec = current->thread.used_vr;
+#endif
+#ifdef CONFIG_VSX
+	bool save_vsx = current->thread.used_vsr;
+#endif
+	ulong ext_msr;
 
 	/* No need to go into the guest when all we do is going out */
 	if (signal_pending(current)) {
@@ -950,19 +1324,79 @@ int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		return -EINTR;
 	}
 
+	/* Save FPU state in stack */
+	if (current->thread.regs->msr & MSR_FP)
+		giveup_fpu(current);
+	memcpy(ext_bkp.fpr, current->thread.fpr, sizeof(current->thread.fpr));
+	ext_bkp.fpscr = current->thread.fpscr;
+	ext_bkp.fpexc_mode = current->thread.fpexc_mode;
+
+#ifdef CONFIG_ALTIVEC
+	/* Save Altivec state in stack */
+	if (save_vec) {
+		if (current->thread.regs->msr & MSR_VEC)
+			giveup_altivec(current);
+		memcpy(ext_bkp.vr, current->thread.vr, sizeof(ext_bkp.vr));
+		ext_bkp.vscr = current->thread.vscr;
+		ext_bkp.vrsave = current->thread.vrsave;
+	}
+	ext_bkp.used_vr = current->thread.used_vr;
+#endif
+
+#ifdef CONFIG_VSX
+	/* Save VSX state in stack */
+	if (save_vsx && (current->thread.regs->msr & MSR_VSX))
+			__giveup_vsx(current);
+	ext_bkp.used_vsr = current->thread.used_vsr;
+#endif
+
+	/* Remember the MSR with disabled extensions */
+	ext_msr = current->thread.regs->msr;
+
 	/* XXX we get called with irq disabled - change that! */
 	local_irq_enable();
 
+	/* Preload FPU if it's enabled */
+	if (vcpu->arch.msr & MSR_FP)
+		kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP);
+
 	ret = __kvmppc_vcpu_entry(kvm_run, vcpu);
 
 	local_irq_disable();
 
+	current->thread.regs->msr = ext_msr;
+
+	/* Make sure we save the guest FPU/Altivec/VSX state */
+	kvmppc_giveup_ext(vcpu, MSR_FP);
+	kvmppc_giveup_ext(vcpu, MSR_VEC);
+	kvmppc_giveup_ext(vcpu, MSR_VSX);
+
+	/* Restore FPU state from stack */
+	memcpy(current->thread.fpr, ext_bkp.fpr, sizeof(ext_bkp.fpr));
+	current->thread.fpscr = ext_bkp.fpscr;
+	current->thread.fpexc_mode = ext_bkp.fpexc_mode;
+
+#ifdef CONFIG_ALTIVEC
+	/* Restore Altivec state from stack */
+	if (save_vec && current->thread.used_vr) {
+		memcpy(current->thread.vr, ext_bkp.vr, sizeof(ext_bkp.vr));
+		current->thread.vscr = ext_bkp.vscr;
+		current->thread.vrsave= ext_bkp.vrsave;
+	}
+	current->thread.used_vr = ext_bkp.used_vr;
+#endif
+
+#ifdef CONFIG_VSX
+	current->thread.used_vsr = ext_bkp.used_vsr;
+#endif
+
 	return ret;
 }
 
 static int kvmppc_book3s_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), 0,
+			THIS_MODULE);
 }
 
 static void kvmppc_book3s_exit(void)
diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c
index faf99f2..0b10503 100644
--- a/arch/powerpc/kvm/book3s_32_mmu.c
+++ b/arch/powerpc/kvm/book3s_32_mmu.c
@@ -37,7 +37,7 @@
 #define dprintk(X...) do { } while(0)
 #endif
 
-#ifdef DEBUG_PTE
+#ifdef DEBUG_MMU_PTE
 #define dprintk_pte(X...) printk(KERN_INFO X)
 #else
 #define dprintk_pte(X...) do { } while(0)
@@ -45,6 +45,9 @@
 
 #define PTEG_FLAG_ACCESSED	0x00000100
 #define PTEG_FLAG_DIRTY		0x00000080
+#ifndef SID_SHIFT
+#define SID_SHIFT		28
+#endif
 
 static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
 {
@@ -57,6 +60,8 @@ static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
 
 static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  struct kvmppc_pte *pte, bool data);
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
+					     u64 *vsid);
 
 static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
 {
@@ -66,13 +71,14 @@ static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t e
 static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
 					 bool data)
 {
-	struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+	u64 vsid;
 	struct kvmppc_pte pte;
 
 	if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
 		return pte.vpage;
 
-	return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+	kvmppc_mmu_book3s_32_esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+	return (((u64)eaddr >> 12) & 0xffff) | (vsid << 16);
 }
 
 static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
@@ -142,8 +148,13 @@ static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 				    bat->bepi_mask);
 		}
 		if ((eaddr & bat->bepi_mask) == bat->bepi) {
+			u64 vsid;
+			kvmppc_mmu_book3s_32_esid_to_vsid(vcpu,
+				eaddr >> SID_SHIFT, &vsid);
+			vsid <<= 16;
+			pte->vpage = (((u64)eaddr >> 12) & 0xffff) | vsid;
+
 			pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
-			pte->vpage = (eaddr >> 12) | VSID_BAT;
 			pte->may_read = bat->pp;
 			pte->may_write = bat->pp > 1;
 			pte->may_execute = true;
@@ -172,7 +183,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr,
 	struct kvmppc_sr *sre;
 	hva_t ptegp;
 	u32 pteg[16];
-	u64 ptem = 0;
+	u32 ptem = 0;
 	int i;
 	int found = 0;
 
@@ -302,6 +313,7 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 	/* And then put in the new SR */
 	sre->raw = value;
 	sre->vsid = (value & 0x0fffffff);
+	sre->valid = (value & 0x80000000) ? false : true;
 	sre->Ks = (value & 0x40000000) ? true : false;
 	sre->Kp = (value & 0x20000000) ? true : false;
 	sre->nx = (value & 0x10000000) ? true : false;
@@ -312,36 +324,48 @@ static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
 
 static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
 {
-	kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+	kvmppc_mmu_pte_flush(vcpu, ea, 0x0FFFF000);
 }
 
-static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
 					     u64 *vsid)
 {
+	ulong ea = esid << SID_SHIFT;
+	struct kvmppc_sr *sr;
+	u64 gvsid = esid;
+
+	if (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		sr = find_sr(to_book3s(vcpu), ea);
+		if (sr->valid)
+			gvsid = sr->vsid;
+	}
+
 	/* In case we only have one of MSR_IR or MSR_DR set, let's put
 	   that in the real-mode context (and hope RM doesn't access
 	   high memory) */
 	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
 	case 0:
-		*vsid = (VSID_REAL >> 16) | esid;
+		*vsid = VSID_REAL | esid;
 		break;
 	case MSR_IR:
-		*vsid = (VSID_REAL_IR >> 16) | esid;
+		*vsid = VSID_REAL_IR | gvsid;
 		break;
 	case MSR_DR:
-		*vsid = (VSID_REAL_DR >> 16) | esid;
+		*vsid = VSID_REAL_DR | gvsid;
 		break;
 	case MSR_DR|MSR_IR:
-	{
-		ulong ea;
-		ea = esid << SID_SHIFT;
-		*vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+		if (!sr->valid)
+			return -1;
+
+		*vsid = sr->vsid;
 		break;
-	}
 	default:
 		BUG();
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c
new file mode 100644
index 0000000..0bb6600
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_32_mmu_host.c
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2010 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ *     Alexander Graf <agraf@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu-hash32.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_SR */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+#ifdef DEBUG_SR
+#define dprintk_sr(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_sr(a, ...) do { } while(0)
+#endif
+
+#if PAGE_SHIFT != 12
+#error Unknown page size
+#endif
+
+#ifdef CONFIG_SMP
+#error XXX need to grab mmu_hash_lock
+#endif
+
+#ifdef CONFIG_PTE_64BIT
+#error Only 32 bit pages are supported for now
+#endif
+
+static ulong htab;
+static u32 htabmask;
+
+static void invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
+{
+	volatile u32 *pteg;
+
+	dprintk_mmu("KVM: Flushing SPTE: 0x%llx (0x%llx) -> 0x%llx\n",
+		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+	pteg = (u32*)pte->slot;
+
+	pteg[0] = 0;
+	asm volatile ("sync");
+	asm volatile ("tlbie %0" : : "r" (pte->pte.eaddr) : "memory");
+	asm volatile ("sync");
+	asm volatile ("tlbsync");
+
+	pte->host_va = 0;
+
+	if (pte->pte.may_write)
+		kvm_release_pfn_dirty(pte->pfn);
+	else
+		kvm_release_pfn_clean(pte->pfn);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%x & 0x%x\n",
+		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_ea &= ea_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.eaddr & ea_mask) == guest_ea) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+
+	/* Doing a complete flush -> start from scratch */
+	if (!ea_mask)
+		vcpu->arch.hpte_cache_offset = 0;
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_vp &= vp_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.vpage & vp_mask) == guest_vp) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.raddr >= pa_start) &&
+		    (pte->pte.raddr < pa_end)) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+}
+
+struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
+{
+	int i;
+	u64 guest_vp;
+
+	guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
+	for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if (pte->pte.vpage == guest_vp)
+			return &pte->pte;
+	}
+
+	return NULL;
+}
+
+static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+	return vcpu->arch.hpte_cache_offset++;
+}
+
+/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
+ * a hash, so we don't waste cycles on looping */
+static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+}
+
+
+static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	u16 sid_map_mask;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_sr("SR: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_sr("SR: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	dprintk_sr("SR: Searching 0x%llx -> not found\n", gvsid);
+	return NULL;
+}
+
+static u32 *kvmppc_mmu_get_pteg(struct kvm_vcpu *vcpu, u32 vsid, u32 eaddr,
+				bool primary)
+{
+	u32 page, hash;
+	ulong pteg = htab;
+
+	page = (eaddr & ~ESID_MASK) >> 12;
+
+	hash = ((vsid ^ page) << 6);
+	if (!primary)
+		hash = ~hash;
+
+	hash &= htabmask;
+
+	pteg |= hash;
+
+	dprintk_mmu("htab: %lx | hash: %x | htabmask: %x | pteg: %lx\n",
+		htab, hash, htabmask, pteg);
+
+	return (u32*)pteg;
+}
+
+extern char etext[];
+
+int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
+{
+	pfn_t hpaddr;
+	u64 va;
+	u64 vsid;
+	struct kvmppc_sid_map *map;
+	volatile u32 *pteg;
+	u32 eaddr = orig_pte->eaddr;
+	u32 pteg0, pteg1;
+	register int rr = 0;
+	bool primary = false;
+	bool evict = false;
+	int hpte_id;
+	struct hpte_cache *pte;
+
+	/* Get host physical address for gpa */
+	hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+	if (kvm_is_error_hva(hpaddr)) {
+		printk(KERN_INFO "Couldn't get guest page for gfn %lx!\n",
+				 orig_pte->eaddr);
+		return -EINVAL;
+	}
+	hpaddr <<= PAGE_SHIFT;
+
+	/* and write the mapping ea -> hpa into the pt */
+	vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
+	map = find_sid_vsid(vcpu, vsid);
+	if (!map) {
+		kvmppc_mmu_map_segment(vcpu, eaddr);
+		map = find_sid_vsid(vcpu, vsid);
+	}
+	BUG_ON(!map);
+
+	vsid = map->host_vsid;
+	va = (vsid << SID_SHIFT) | (eaddr & ~ESID_MASK);
+
+next_pteg:
+	if (rr == 16) {
+		primary = !primary;
+		evict = true;
+		rr = 0;
+	}
+
+	pteg = kvmppc_mmu_get_pteg(vcpu, vsid, eaddr, primary);
+
+	/* not evicting yet */
+	if (!evict && (pteg[rr] & PTE_V)) {
+		rr += 2;
+		goto next_pteg;
+	}
+
+	dprintk_mmu("KVM: old PTEG: %p (%d)\n", pteg, rr);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[0], pteg[1]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[2], pteg[3]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[4], pteg[5]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[6], pteg[7]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[8], pteg[9]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[10], pteg[11]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[12], pteg[13]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[14], pteg[15]);
+
+	pteg0 = ((eaddr & 0x0fffffff) >> 22) | (vsid << 7) | PTE_V |
+		(primary ? 0 : PTE_SEC);
+	pteg1 = hpaddr | PTE_M | PTE_R | PTE_C;
+
+	if (orig_pte->may_write) {
+		pteg1 |= PP_RWRW;
+		mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+	} else {
+		pteg1 |= PP_RWRX;
+	}
+
+	local_irq_disable();
+
+	if (pteg[rr]) {
+		pteg[rr] = 0;
+		asm volatile ("sync");
+	}
+	pteg[rr + 1] = pteg1;
+	pteg[rr] = pteg0;
+	asm volatile ("sync");
+
+	local_irq_enable();
+
+	dprintk_mmu("KVM: new PTEG: %p\n", pteg);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[0], pteg[1]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[2], pteg[3]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[4], pteg[5]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[6], pteg[7]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[8], pteg[9]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[10], pteg[11]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[12], pteg[13]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[14], pteg[15]);
+
+
+	/* Now tell our Shadow PTE code about the new page */
+
+	hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
+	pte = &vcpu->arch.hpte_cache[hpte_id];
+
+	dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%llx (0x%llx) -> %lx\n",
+		    orig_pte->may_write ? 'w' : '-',
+		    orig_pte->may_execute ? 'x' : '-',
+		    orig_pte->eaddr, (ulong)pteg, va,
+		    orig_pte->vpage, hpaddr);
+
+	pte->slot = (ulong)&pteg[rr];
+	pte->host_va = va;
+	pte->pte = *orig_pte;
+	pte->pfn = hpaddr >> PAGE_SHIFT;
+
+	return 0;
+}
+
+static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	u16 sid_map_mask;
+	static int backwards_map = 0;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	/* We might get collisions that trap in preceding order, so let's
+	   map them differently */
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	if (backwards_map)
+		sid_map_mask = SID_MAP_MASK - sid_map_mask;
+
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+
+	/* Make sure we're taking the other map next time */
+	backwards_map = !backwards_map;
+
+	/* Uh-oh ... out of mappings. Let's flush! */
+	if (vcpu_book3s->vsid_next >= vcpu_book3s->vsid_max) {
+		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+		memset(vcpu_book3s->sid_map, 0,
+		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
+	}
+	map->host_vsid = vcpu_book3s->vsid_next;
+
+	/* Would have to be 111 to be completely aligned with the rest of
+	   Linux, but that is just way too little space! */
+	vcpu_book3s->vsid_next+=1;
+
+	map->guest_vsid = gvsid;
+	map->valid = true;
+
+	return map;
+}
+
+int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
+{
+	u32 esid = eaddr >> SID_SHIFT;
+	u64 gvsid;
+	u32 sr;
+	struct kvmppc_sid_map *map;
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
+		/* Invalidate an entry */
+		svcpu->sr[esid] = SR_INVALID;
+		return -ENOENT;
+	}
+
+	map = find_sid_vsid(vcpu, gvsid);
+	if (!map)
+		map = create_sid_map(vcpu, gvsid);
+
+	map->guest_esid = esid;
+	sr = map->host_vsid | SR_KP;
+	svcpu->sr[esid] = sr;
+
+	dprintk_sr("MMU: mtsr %d, 0x%x\n", esid, sr);
+
+	return 0;
+}
+
+void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
+{
+	int i;
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	dprintk_sr("MMU: flushing all segments (%d)\n", ARRAY_SIZE(svcpu->sr));
+	for (i = 0; i < ARRAY_SIZE(svcpu->sr); i++)
+		svcpu->sr[i] = SR_INVALID;
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	preempt_disable();
+	__destroy_context(to_book3s(vcpu)->context_id);
+	preempt_enable();
+}
+
+/* From mm/mmu_context_hash32.c */
+#define CTX_TO_VSID(ctx) (((ctx) * (897 * 16)) & 0xffffff)
+
+int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int err;
+	ulong sdr1;
+
+	err = __init_new_context();
+	if (err < 0)
+		return -1;
+	vcpu3s->context_id = err;
+
+	vcpu3s->vsid_max = CTX_TO_VSID(vcpu3s->context_id + 1) - 1;
+	vcpu3s->vsid_first = CTX_TO_VSID(vcpu3s->context_id);
+
+#if 0 /* XXX still doesn't guarantee uniqueness */
+	/* We could collide with the Linux vsid space because the vsid
+	 * wraps around at 24 bits. We're safe if we do our own space
+	 * though, so let's always set the highest bit. */
+
+	vcpu3s->vsid_max |= 0x00800000;
+	vcpu3s->vsid_first |= 0x00800000;
+#endif
+	BUG_ON(vcpu3s->vsid_max < vcpu3s->vsid_first);
+
+	vcpu3s->vsid_next = vcpu3s->vsid_first;
+
+	/* Remember where the HTAB is */
+	asm ( "mfsdr1 %0" : "=r"(sdr1) );
+	htabmask = ((sdr1 & 0x1FF) << 16) | 0xFFC0;
+	htab = (ulong)__va(sdr1 & 0xffff0000);
+
+	return 0;
+}
diff --git a/arch/powerpc/kvm/book3s_32_sr.S b/arch/powerpc/kvm/book3s_32_sr.S
new file mode 100644
index 0000000..3608471
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_32_sr.S
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
+.macro LOAD_GUEST_SEGMENTS
+
+	/* Required state:
+	 *
+	 * MSR = ~IR|DR
+	 * R1 = host R1
+	 * R2 = host R2
+	 * R3 = shadow vcpu
+	 * all other volatile GPRS = free
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
+	 */
+
+#define XCHG_SR(n)	lwz	r9, (SVCPU_SR+(n*4))(r3);  \
+			mtsr	n, r9
+
+	XCHG_SR(0)
+	XCHG_SR(1)
+	XCHG_SR(2)
+	XCHG_SR(3)
+	XCHG_SR(4)
+	XCHG_SR(5)
+	XCHG_SR(6)
+	XCHG_SR(7)
+	XCHG_SR(8)
+	XCHG_SR(9)
+	XCHG_SR(10)
+	XCHG_SR(11)
+	XCHG_SR(12)
+	XCHG_SR(13)
+	XCHG_SR(14)
+	XCHG_SR(15)
+
+	/* Clear BATs. */
+
+#define KVM_KILL_BAT(n, reg)		\
+        mtspr   SPRN_IBAT##n##U,reg;	\
+        mtspr   SPRN_IBAT##n##L,reg;	\
+        mtspr   SPRN_DBAT##n##U,reg;	\
+        mtspr   SPRN_DBAT##n##L,reg;	\
+
+        li	r9, 0
+	KVM_KILL_BAT(0, r9)
+	KVM_KILL_BAT(1, r9)
+	KVM_KILL_BAT(2, r9)
+	KVM_KILL_BAT(3, r9)
+
+.endm
+
+/******************************************************************************
+ *                                                                            *
+ *                               Exit code                                    *
+ *                                                                            *
+ *****************************************************************************/
+
+.macro LOAD_HOST_SEGMENTS
+
+	/* Register usage at this point:
+	 *
+	 * R1         = host R1
+	 * R2         = host R2
+	 * R12        = exit handler id
+	 * R13        = shadow vcpu - SHADOW_VCPU_OFF
+	 * SVCPU.*    = guest *
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
+	 *
+	 */
+
+	/* Restore BATs */
+
+	/* We only overwrite the upper part, so we only restoree
+	   the upper part. */
+#define KVM_LOAD_BAT(n, reg, RA, RB)	\
+	lwz	RA,(n*16)+0(reg);	\
+	lwz	RB,(n*16)+4(reg);	\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_IBAT##n##L,RB;	\
+	lwz	RA,(n*16)+8(reg);	\
+	lwz	RB,(n*16)+12(reg);	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##L,RB;	\
+
+	lis     r9, BATS@ha
+	addi    r9, r9, BATS@l
+	tophys(r9, r9)
+	KVM_LOAD_BAT(0, r9, r10, r11)
+	KVM_LOAD_BAT(1, r9, r10, r11)
+	KVM_LOAD_BAT(2, r9, r10, r11)
+	KVM_LOAD_BAT(3, r9, r10, r11)
+
+	/* Restore Segment Registers */
+
+	/* 0xc - 0xf */
+
+        li      r0, 4
+        mtctr   r0
+	LOAD_REG_IMMEDIATE(r3, 0x20000000 | (0x111 * 0xc))
+        lis     r4, 0xc000
+3:      mtsrin  r3, r4
+        addi    r3, r3, 0x111     /* increment VSID */
+        addis   r4, r4, 0x1000    /* address of next segment */
+        bdnz    3b
+
+	/* 0x0 - 0xb */
+
+	/* 'current->mm' needs to be in r4 */
+	tophys(r4, r2)
+	lwz	r4, MM(r4)
+	tophys(r4, r4)
+	/* This only clobbers r0, r3, r4 and r5 */
+	bl	switch_mmu_context
+
+.endm
diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c
deleted file mode 100644
index 1027eac..0000000
--- a/arch/powerpc/kvm/book3s_64_emulate.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/kvm_ppc.h>
-#include <asm/disassemble.h>
-#include <asm/kvm_book3s.h>
-#include <asm/reg.h>
-
-#define OP_19_XOP_RFID		18
-#define OP_19_XOP_RFI		50
-
-#define OP_31_XOP_MFMSR		83
-#define OP_31_XOP_MTMSR		146
-#define OP_31_XOP_MTMSRD	178
-#define OP_31_XOP_MTSRIN	242
-#define OP_31_XOP_TLBIEL	274
-#define OP_31_XOP_TLBIE		306
-#define OP_31_XOP_SLBMTE	402
-#define OP_31_XOP_SLBIE		434
-#define OP_31_XOP_SLBIA		498
-#define OP_31_XOP_MFSRIN	659
-#define OP_31_XOP_SLBMFEV	851
-#define OP_31_XOP_EIOIO		854
-#define OP_31_XOP_SLBMFEE	915
-
-/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
-#define OP_31_XOP_DCBZ		1010
-
-int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                           unsigned int inst, int *advance)
-{
-	int emulated = EMULATE_DONE;
-
-	switch (get_op(inst)) {
-	case 19:
-		switch (get_xop(inst)) {
-		case OP_19_XOP_RFID:
-		case OP_19_XOP_RFI:
-			vcpu->arch.pc = vcpu->arch.srr0;
-			kvmppc_set_msr(vcpu, vcpu->arch.srr1);
-			*advance = 0;
-			break;
-
-		default:
-			emulated = EMULATE_FAIL;
-			break;
-		}
-		break;
-	case 31:
-		switch (get_xop(inst)) {
-		case OP_31_XOP_MFMSR:
-			vcpu->arch.gpr[get_rt(inst)] = vcpu->arch.msr;
-			break;
-		case OP_31_XOP_MTMSRD:
-		{
-			ulong rs = vcpu->arch.gpr[get_rs(inst)];
-			if (inst & 0x10000) {
-				vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
-				vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
-			} else
-				kvmppc_set_msr(vcpu, rs);
-			break;
-		}
-		case OP_31_XOP_MTMSR:
-			kvmppc_set_msr(vcpu, vcpu->arch.gpr[get_rs(inst)]);
-			break;
-		case OP_31_XOP_MFSRIN:
-		{
-			int srnum;
-
-			srnum = (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf;
-			if (vcpu->arch.mmu.mfsrin) {
-				u32 sr;
-				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
-				vcpu->arch.gpr[get_rt(inst)] = sr;
-			}
-			break;
-		}
-		case OP_31_XOP_MTSRIN:
-			vcpu->arch.mmu.mtsrin(vcpu,
-				(vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf,
-				vcpu->arch.gpr[get_rs(inst)]);
-			break;
-		case OP_31_XOP_TLBIE:
-		case OP_31_XOP_TLBIEL:
-		{
-			bool large = (inst & 0x00200000) ? true : false;
-			ulong addr = vcpu->arch.gpr[get_rb(inst)];
-			vcpu->arch.mmu.tlbie(vcpu, addr, large);
-			break;
-		}
-		case OP_31_XOP_EIOIO:
-			break;
-		case OP_31_XOP_SLBMTE:
-			if (!vcpu->arch.mmu.slbmte)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbmte(vcpu, vcpu->arch.gpr[get_rs(inst)],
-						vcpu->arch.gpr[get_rb(inst)]);
-			break;
-		case OP_31_XOP_SLBIE:
-			if (!vcpu->arch.mmu.slbie)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbie(vcpu, vcpu->arch.gpr[get_rb(inst)]);
-			break;
-		case OP_31_XOP_SLBIA:
-			if (!vcpu->arch.mmu.slbia)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbia(vcpu);
-			break;
-		case OP_31_XOP_SLBMFEE:
-			if (!vcpu->arch.mmu.slbmfee) {
-				emulated = EMULATE_FAIL;
-			} else {
-				ulong t, rb;
-
-				rb = vcpu->arch.gpr[get_rb(inst)];
-				t = vcpu->arch.mmu.slbmfee(vcpu, rb);
-				vcpu->arch.gpr[get_rt(inst)] = t;
-			}
-			break;
-		case OP_31_XOP_SLBMFEV:
-			if (!vcpu->arch.mmu.slbmfev) {
-				emulated = EMULATE_FAIL;
-			} else {
-				ulong t, rb;
-
-				rb = vcpu->arch.gpr[get_rb(inst)];
-				t = vcpu->arch.mmu.slbmfev(vcpu, rb);
-				vcpu->arch.gpr[get_rt(inst)] = t;
-			}
-			break;
-		case OP_31_XOP_DCBZ:
-		{
-			ulong rb =  vcpu->arch.gpr[get_rb(inst)];
-			ulong ra = 0;
-			ulong addr;
-			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-
-			if (get_ra(inst))
-				ra = vcpu->arch.gpr[get_ra(inst)];
-
-			addr = (ra + rb) & ~31ULL;
-			if (!(vcpu->arch.msr & MSR_SF))
-				addr &= 0xffffffff;
-
-			if (kvmppc_st(vcpu, addr, 32, zeros)) {
-				vcpu->arch.dear = addr;
-				vcpu->arch.fault_dear = addr;
-				to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
-						      DSISR_ISSTORE;
-				kvmppc_book3s_queue_irqprio(vcpu,
-					BOOK3S_INTERRUPT_DATA_STORAGE);
-				kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL);
-			}
-
-			break;
-		}
-		default:
-			emulated = EMULATE_FAIL;
-		}
-		break;
-	default:
-		emulated = EMULATE_FAIL;
-	}
-
-	return emulated;
-}
-
-void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
-                    u32 val)
-{
-	if (upper) {
-		/* Upper BAT */
-		u32 bl = (val >> 2) & 0x7ff;
-		bat->bepi_mask = (~bl << 17);
-		bat->bepi = val & 0xfffe0000;
-		bat->vs = (val & 2) ? 1 : 0;
-		bat->vp = (val & 1) ? 1 : 0;
-		bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
-	} else {
-		/* Lower BAT */
-		bat->brpn = val & 0xfffe0000;
-		bat->wimg = (val >> 3) & 0xf;
-		bat->pp = val & 3;
-		bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
-	}
-}
-
-static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
-{
-	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
-	struct kvmppc_bat *bat;
-
-	switch (sprn) {
-	case SPRN_IBAT0U ... SPRN_IBAT3L:
-		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
-		break;
-	case SPRN_IBAT4U ... SPRN_IBAT7L:
-		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2];
-		break;
-	case SPRN_DBAT0U ... SPRN_DBAT3L:
-		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
-		break;
-	case SPRN_DBAT4U ... SPRN_DBAT7L:
-		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2];
-		break;
-	default:
-		BUG();
-	}
-
-	kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
-}
-
-int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
-{
-	int emulated = EMULATE_DONE;
-
-	switch (sprn) {
-	case SPRN_SDR1:
-		to_book3s(vcpu)->sdr1 = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_DSISR:
-		to_book3s(vcpu)->dsisr = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_DAR:
-		vcpu->arch.dear = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_HIOR:
-		to_book3s(vcpu)->hior = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_IBAT0U ... SPRN_IBAT3L:
-	case SPRN_IBAT4U ... SPRN_IBAT7L:
-	case SPRN_DBAT0U ... SPRN_DBAT3L:
-	case SPRN_DBAT4U ... SPRN_DBAT7L:
-		kvmppc_write_bat(vcpu, sprn, (u32)vcpu->arch.gpr[rs]);
-		/* BAT writes happen so rarely that we're ok to flush
-		 * everything here */
-		kvmppc_mmu_pte_flush(vcpu, 0, 0);
-		break;
-	case SPRN_HID0:
-		to_book3s(vcpu)->hid[0] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_HID1:
-		to_book3s(vcpu)->hid[1] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_HID2:
-		to_book3s(vcpu)->hid[2] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_HID4:
-		to_book3s(vcpu)->hid[4] = vcpu->arch.gpr[rs];
-		break;
-	case SPRN_HID5:
-		to_book3s(vcpu)->hid[5] = vcpu->arch.gpr[rs];
-		/* guest HID5 set can change is_dcbz32 */
-		if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
-		    (mfmsr() & MSR_HV))
-			vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
-		break;
-	case SPRN_ICTC:
-	case SPRN_THRM1:
-	case SPRN_THRM2:
-	case SPRN_THRM3:
-	case SPRN_CTRLF:
-	case SPRN_CTRLT:
-		break;
-	default:
-		printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
-#ifndef DEBUG_SPR
-		emulated = EMULATE_FAIL;
-#endif
-		break;
-	}
-
-	return emulated;
-}
-
-int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
-{
-	int emulated = EMULATE_DONE;
-
-	switch (sprn) {
-	case SPRN_SDR1:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->sdr1;
-		break;
-	case SPRN_DSISR:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->dsisr;
-		break;
-	case SPRN_DAR:
-		vcpu->arch.gpr[rt] = vcpu->arch.dear;
-		break;
-	case SPRN_HIOR:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hior;
-		break;
-	case SPRN_HID0:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[0];
-		break;
-	case SPRN_HID1:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[1];
-		break;
-	case SPRN_HID2:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[2];
-		break;
-	case SPRN_HID4:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[4];
-		break;
-	case SPRN_HID5:
-		vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[5];
-		break;
-	case SPRN_THRM1:
-	case SPRN_THRM2:
-	case SPRN_THRM3:
-	case SPRN_CTRLF:
-	case SPRN_CTRLT:
-		vcpu->arch.gpr[rt] = 0;
-		break;
-	default:
-		printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
-#ifndef DEBUG_SPR
-		emulated = EMULATE_FAIL;
-#endif
-		break;
-	}
-
-	return emulated;
-}
-
diff --git a/arch/powerpc/kvm/book3s_64_exports.c b/arch/powerpc/kvm/book3s_64_exports.c
deleted file mode 100644
index 5b2db38..0000000
--- a/arch/powerpc/kvm/book3s_64_exports.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <linux/module.h>
-#include <asm/kvm_book3s.h>
-
-EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
-EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
deleted file mode 100644
index 7b55d80..0000000
--- a/arch/powerpc/kvm/book3s_64_interrupts.S
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/kvm_asm.h>
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-#include <asm/exception-64s.h>
-
-#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit
-#define ULONG_SIZE 8
-#define VCPU_GPR(n)     (VCPU_GPRS + (n * ULONG_SIZE))
-
-.macro mfpaca tmp_reg, src_reg, offset, vcpu_reg
-	ld	\tmp_reg, (PACA_EXMC+\offset)(r13)
-	std	\tmp_reg, VCPU_GPR(\src_reg)(\vcpu_reg)
-.endm
-
-.macro DISABLE_INTERRUPTS
-       mfmsr   r0
-       rldicl  r0,r0,48,1
-       rotldi  r0,r0,16
-       mtmsrd  r0,1
-.endm
-
-/*****************************************************************************
- *                                                                           *
- *     Guest entry / exit code that is in kernel module memory (highmem)     *
- *                                                                           *
- ****************************************************************************/
-
-/* Registers:
- *  r3: kvm_run pointer
- *  r4: vcpu pointer
- */
-_GLOBAL(__kvmppc_vcpu_entry)
-
-kvm_start_entry:
-	/* Write correct stack frame */
-	mflr    r0
-	std     r0,16(r1)
-
-	/* Save host state to the stack */
-	stdu	r1, -SWITCH_FRAME_SIZE(r1)
-
-	/* Save r3 (kvm_run) and r4 (vcpu) */
-	SAVE_2GPRS(3, r1)
-
-	/* Save non-volatile registers (r14 - r31) */
-	SAVE_NVGPRS(r1)
-
-	/* Save LR */
-	mflr	r14
-	std	r14, _LINK(r1)
-
-/* XXX optimize non-volatile loading away */
-kvm_start_lightweight:
-
-	DISABLE_INTERRUPTS
-
-	/* Save R1/R2 in the PACA */
-	std	r1, PACAR1(r13)
-	std	r2, (PACA_EXMC+EX_SRR0)(r13)
-	ld	r3, VCPU_HIGHMEM_HANDLER(r4)
-	std	r3, PACASAVEDMSR(r13)
-
-	/* Load non-volatile guest state from the vcpu */
-	ld	r14, VCPU_GPR(r14)(r4)
-	ld	r15, VCPU_GPR(r15)(r4)
-	ld	r16, VCPU_GPR(r16)(r4)
-	ld	r17, VCPU_GPR(r17)(r4)
-	ld	r18, VCPU_GPR(r18)(r4)
-	ld	r19, VCPU_GPR(r19)(r4)
-	ld	r20, VCPU_GPR(r20)(r4)
-	ld	r21, VCPU_GPR(r21)(r4)
-	ld	r22, VCPU_GPR(r22)(r4)
-	ld	r23, VCPU_GPR(r23)(r4)
-	ld	r24, VCPU_GPR(r24)(r4)
-	ld	r25, VCPU_GPR(r25)(r4)
-	ld	r26, VCPU_GPR(r26)(r4)
-	ld	r27, VCPU_GPR(r27)(r4)
-	ld	r28, VCPU_GPR(r28)(r4)
-	ld	r29, VCPU_GPR(r29)(r4)
-	ld	r30, VCPU_GPR(r30)(r4)
-	ld	r31, VCPU_GPR(r31)(r4)
-
-	ld	r9, VCPU_PC(r4)			/* r9 = vcpu->arch.pc */
-	ld	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
-
-	ld	r3, VCPU_TRAMPOLINE_ENTER(r4)
-	mtsrr0	r3
-
-	LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
-	mtsrr1	r3
-
-	/* Load guest state in the respective registers */
-	lwz	r3, VCPU_CR(r4)		/* r3 = vcpu->arch.cr */
-	stw	r3, (PACA_EXMC + EX_CCR)(r13)
-
-	ld	r3, VCPU_CTR(r4)	/* r3 = vcpu->arch.ctr */
-	mtctr	r3			/* CTR = r3 */
-
-	ld	r3, VCPU_LR(r4)		/* r3 = vcpu->arch.lr */
-	mtlr	r3			/* LR = r3 */
-
-	ld	r3, VCPU_XER(r4)	/* r3 = vcpu->arch.xer */
-	std	r3, (PACA_EXMC + EX_R3)(r13)
-
-	/* Some guests may need to have dcbz set to 32 byte length.
-	 *
-	 * Usually we ensure that by patching the guest's instructions
-	 * to trap on dcbz and emulate it in the hypervisor.
-	 *
-	 * If we can, we should tell the CPU to use 32 byte dcbz though,
-	 * because that's a lot faster.
-	 */
-
-	ld	r3, VCPU_HFLAGS(r4)
-	rldicl.	r3, r3, 0, 63		/* CR = ((r3 & 1) == 0) */
-	beq	no_dcbz32_on
-
-	mfspr   r3,SPRN_HID5
-	ori     r3, r3, 0x80		/* XXX HID5_dcbz32 = 0x80 */
-	mtspr   SPRN_HID5,r3
-
-no_dcbz32_on:
-	/*	Load guest GPRs */
-
-	ld	r3, VCPU_GPR(r9)(r4)
-	std	r3, (PACA_EXMC + EX_R9)(r13)
-	ld	r3, VCPU_GPR(r10)(r4)
-	std	r3, (PACA_EXMC + EX_R10)(r13)
-	ld	r3, VCPU_GPR(r11)(r4)
-	std	r3, (PACA_EXMC + EX_R11)(r13)
-	ld	r3, VCPU_GPR(r12)(r4)
-	std	r3, (PACA_EXMC + EX_R12)(r13)
-	ld	r3, VCPU_GPR(r13)(r4)
-	std	r3, (PACA_EXMC + EX_R13)(r13)
-
-	ld	r0, VCPU_GPR(r0)(r4)
-	ld	r1, VCPU_GPR(r1)(r4)
-	ld	r2, VCPU_GPR(r2)(r4)
-	ld	r3, VCPU_GPR(r3)(r4)
-	ld	r5, VCPU_GPR(r5)(r4)
-	ld	r6, VCPU_GPR(r6)(r4)
-	ld	r7, VCPU_GPR(r7)(r4)
-	ld	r8, VCPU_GPR(r8)(r4)
-	ld	r4, VCPU_GPR(r4)(r4)
-
-	/* This sets the Magic value for the trampoline */
-
-	li	r11, 1
-	stb	r11, PACA_KVM_IN_GUEST(r13)
-
-	/* Jump to SLB patching handlder and into our guest */
-	RFI
-
-/*
- * This is the handler in module memory. It gets jumped at from the
- * lowmem trampoline code, so it's basically the guest exit code.
- *
- */
-
-.global kvmppc_handler_highmem
-kvmppc_handler_highmem:
-
-	/*
-	 * Register usage at this point:
-	 *
-	 * R00   = guest R13
-	 * R01   = host R1
-	 * R02   = host R2
-	 * R10   = guest PC
-	 * R11   = guest MSR
-	 * R12   = exit handler id
-	 * R13   = PACA
-	 * PACA.exmc.R9    = guest R1
-	 * PACA.exmc.R10   = guest R10
-	 * PACA.exmc.R11   = guest R11
-	 * PACA.exmc.R12   = guest R12
-	 * PACA.exmc.R13   = guest R2
-	 * PACA.exmc.DAR   = guest DAR
-	 * PACA.exmc.DSISR = guest DSISR
-	 * PACA.exmc.LR    = guest instruction
-	 * PACA.exmc.CCR   = guest CR
-	 * PACA.exmc.SRR0  = guest R0
-	 *
-	 */
-
-	std	r3, (PACA_EXMC+EX_R3)(r13)
-
-	/* save the exit id in R3 */
-	mr	r3, r12
-
-	/* R12 = vcpu */
-	ld	r12, GPR4(r1)
-
-	/* Now save the guest state */
-
-	std	r0, VCPU_GPR(r13)(r12)
-	std	r4, VCPU_GPR(r4)(r12)
-	std	r5, VCPU_GPR(r5)(r12)
-	std	r6, VCPU_GPR(r6)(r12)
-	std	r7, VCPU_GPR(r7)(r12)
-	std	r8, VCPU_GPR(r8)(r12)
-	std	r9, VCPU_GPR(r9)(r12)
-
-	/* get registers from PACA */
-	mfpaca	r5, r0, EX_SRR0, r12
-	mfpaca	r5, r3, EX_R3, r12
-	mfpaca	r5, r1, EX_R9, r12
-	mfpaca	r5, r10, EX_R10, r12
-	mfpaca	r5, r11, EX_R11, r12
-	mfpaca	r5, r12, EX_R12, r12
-	mfpaca	r5, r2, EX_R13, r12
-
-	lwz	r5, (PACA_EXMC+EX_LR)(r13)
-	stw	r5, VCPU_LAST_INST(r12)
-
-	lwz	r5, (PACA_EXMC+EX_CCR)(r13)
-	stw	r5, VCPU_CR(r12)
-
-	ld	r5, VCPU_HFLAGS(r12)
-	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
-	beq	no_dcbz32_off
-
-	mfspr   r5,SPRN_HID5
-	rldimi  r5,r5,6,56
-	mtspr   SPRN_HID5,r5
-
-no_dcbz32_off:
-
-	/* XXX maybe skip on lightweight? */
-	std	r14, VCPU_GPR(r14)(r12)
-	std	r15, VCPU_GPR(r15)(r12)
-	std	r16, VCPU_GPR(r16)(r12)
-	std	r17, VCPU_GPR(r17)(r12)
-	std	r18, VCPU_GPR(r18)(r12)
-	std	r19, VCPU_GPR(r19)(r12)
-	std	r20, VCPU_GPR(r20)(r12)
-	std	r21, VCPU_GPR(r21)(r12)
-	std	r22, VCPU_GPR(r22)(r12)
-	std	r23, VCPU_GPR(r23)(r12)
-	std	r24, VCPU_GPR(r24)(r12)
-	std	r25, VCPU_GPR(r25)(r12)
-	std	r26, VCPU_GPR(r26)(r12)
-	std	r27, VCPU_GPR(r27)(r12)
-	std	r28, VCPU_GPR(r28)(r12)
-	std	r29, VCPU_GPR(r29)(r12)
-	std	r30, VCPU_GPR(r30)(r12)
-	std	r31, VCPU_GPR(r31)(r12)
-
-	/* Restore non-volatile host registers (r14 - r31) */
-	REST_NVGPRS(r1)
-
-	/* Save guest PC (R10) */
-	std	r10, VCPU_PC(r12)
-
-	/* Save guest msr (R11) */
-	std	r11, VCPU_SHADOW_MSR(r12)
-
-	/* Save guest CTR (in R12) */
-	mfctr	r5
-	std	r5, VCPU_CTR(r12)
-
-	/* Save guest LR */
-	mflr	r5
-	std	r5, VCPU_LR(r12)
-
-	/* Save guest XER */
-	mfxer	r5
-	std	r5, VCPU_XER(r12)
-
-	/* Save guest DAR */
-	ld	r5, (PACA_EXMC+EX_DAR)(r13)
-	std	r5, VCPU_FAULT_DEAR(r12)
-
-	/* Save guest DSISR */
-	lwz	r5, (PACA_EXMC+EX_DSISR)(r13)
-	std	r5, VCPU_FAULT_DSISR(r12)
-
-	/* Restore host msr -> SRR1 */
-	ld	r7, VCPU_HOST_MSR(r12)
-	mtsrr1	r7
-
-	/* Restore host IP -> SRR0 */
-	ld	r6, VCPU_HOST_RETIP(r12)
-	mtsrr0	r6
-
-	/*
-	 * For some interrupts, we need to call the real Linux
-	 * handler, so it can do work for us. This has to happen
-	 * as if the interrupt arrived from the kernel though,
-	 * so let's fake it here where most state is restored.
-	 *
-	 * Call Linux for hardware interrupts/decrementer
-	 * r3 = address of interrupt handler (exit reason)
-	 */
-
-	cmpwi	r3, BOOK3S_INTERRUPT_EXTERNAL
-	beq	call_linux_handler
-	cmpwi	r3, BOOK3S_INTERRUPT_DECREMENTER
-	beq	call_linux_handler
-
-	/* Back to Interruptable Mode! (goto kvm_return_point) */
-	RFI
-
-call_linux_handler:
-
-	/*
-	 * If we land here we need to jump back to the handler we
-	 * came from.
-	 *
-	 * We have a page that we can access from real mode, so let's
-	 * jump back to that and use it as a trampoline to get back into the
-	 * interrupt handler!
-	 *
-	 * R3 still contains the exit code,
-	 * R6 VCPU_HOST_RETIP and
-	 * R7 VCPU_HOST_MSR
-	 */
-
-	mtlr	r3
-
-	ld	r5, VCPU_TRAMPOLINE_LOWMEM(r12)
-	mtsrr0	r5
-	LOAD_REG_IMMEDIATE(r5, MSR_KERNEL & ~(MSR_IR | MSR_DR))
-	mtsrr1	r5
-
-	RFI
-
-.global kvm_return_point
-kvm_return_point:
-
-	/* Jump back to lightweight entry if we're supposed to */
-	/* go back into the guest */
-	mr	r5, r3
-	/* Restore r3 (kvm_run) and r4 (vcpu) */
-	REST_2GPRS(3, r1)
-	bl	KVMPPC_HANDLE_EXIT
-
-#if 0 /* XXX get lightweight exits back */
-	cmpwi	r3, RESUME_GUEST
-	bne	kvm_exit_heavyweight
-
-	/* put VCPU and KVM_RUN back into place and roll again! */
-	REST_2GPRS(3, r1)
-	b	kvm_start_lightweight
-
-kvm_exit_heavyweight:
-	/* Restore non-volatile host registers */
-	ld	r14, _LINK(r1)
-	mtlr	r14
-	REST_NVGPRS(r1)
-
-	addi    r1, r1, SWITCH_FRAME_SIZE
-#else
-	ld	r4, _LINK(r1)
-	mtlr	r4
-
-	cmpwi	r3, RESUME_GUEST
-	bne	kvm_exit_heavyweight
-
-	REST_2GPRS(3, r1)
-
-	addi    r1, r1, SWITCH_FRAME_SIZE
-
-	b	kvm_start_entry
-
-kvm_exit_heavyweight:
-
-	addi    r1, r1, SWITCH_FRAME_SIZE
-#endif
-
-	blr
diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c
index e4beeb3..4025ea2 100644
--- a/arch/powerpc/kvm/book3s_64_mmu.c
+++ b/arch/powerpc/kvm/book3s_64_mmu.c
@@ -54,7 +54,7 @@ static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe(
 		if (!vcpu_book3s->slb[i].valid)
 			continue;
 
-		if (vcpu_book3s->slb[i].large)
+		if (vcpu_book3s->slb[i].tb)
 			cmp_esid = esid_1t;
 
 		if (vcpu_book3s->slb[i].esid == cmp_esid)
@@ -65,9 +65,10 @@ static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe(
 		eaddr, esid, esid_1t);
 	for (i = 0; i < vcpu_book3s->slb_nr; i++) {
 	    if (vcpu_book3s->slb[i].vsid)
-		dprintk("  %d: %c%c %llx %llx\n", i,
+		dprintk("  %d: %c%c%c %llx %llx\n", i,
 			vcpu_book3s->slb[i].valid ? 'v' : ' ',
 			vcpu_book3s->slb[i].large ? 'l' : ' ',
+			vcpu_book3s->slb[i].tb    ? 't' : ' ',
 			vcpu_book3s->slb[i].esid,
 			vcpu_book3s->slb[i].vsid);
 	}
@@ -84,7 +85,7 @@ static u64 kvmppc_mmu_book3s_64_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
 	if (!slb)
 		return 0;
 
-	if (slb->large)
+	if (slb->tb)
 		return (((u64)eaddr >> 12) & 0xfffffff) |
 		       (((u64)slb->vsid) << 28);
 
@@ -231,7 +232,7 @@ do_second:
 			}
 
 			dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
-				"-> 0x%llx\n",
+				"-> 0x%lx\n",
 				eaddr, avpn, gpte->vpage, gpte->raddr);
 			found = true;
 			break;
@@ -309,7 +310,8 @@ static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
 	slbe = &vcpu_book3s->slb[slb_nr];
 
 	slbe->large = (rs & SLB_VSID_L) ? 1 : 0;
-	slbe->esid  = slbe->large ? esid_1t : esid;
+	slbe->tb    = (rs & SLB_VSID_B_1T) ? 1 : 0;
+	slbe->esid  = slbe->tb ? esid_1t : esid;
 	slbe->vsid  = rs >> 12;
 	slbe->valid = (rb & SLB_ESID_V) ? 1 : 0;
 	slbe->Ks    = (rs & SLB_VSID_KS) ? 1 : 0;
@@ -381,7 +383,7 @@ static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu)
 
 	if (vcpu->arch.msr & MSR_IR) {
 		kvmppc_mmu_flush_segments(vcpu);
-		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+		kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
 	}
 }
 
@@ -437,37 +439,43 @@ static void kvmppc_mmu_book3s_64_tlbie(struct kvm_vcpu *vcpu, ulong va,
 	kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask);
 }
 
-static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
 					     u64 *vsid)
 {
+	ulong ea = esid << SID_SHIFT;
+	struct kvmppc_slb *slb;
+	u64 gvsid = esid;
+
+	if (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
+		if (slb)
+			gvsid = slb->vsid;
+	}
+
 	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
 	case 0:
-		*vsid = (VSID_REAL >> 16) | esid;
+		*vsid = VSID_REAL | esid;
 		break;
 	case MSR_IR:
-		*vsid = (VSID_REAL_IR >> 16) | esid;
+		*vsid = VSID_REAL_IR | gvsid;
 		break;
 	case MSR_DR:
-		*vsid = (VSID_REAL_DR >> 16) | esid;
+		*vsid = VSID_REAL_DR | gvsid;
 		break;
 	case MSR_DR|MSR_IR:
-	{
-		ulong ea;
-		struct kvmppc_slb *slb;
-		ea = esid << SID_SHIFT;
-		slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
-		if (slb)
-			*vsid = slb->vsid;
-		else
+		if (!slb)
 			return -ENOENT;
 
+		*vsid = gvsid;
 		break;
-	}
 	default:
 		BUG();
 		break;
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index f2899b2..e4b5744 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -48,21 +48,25 @@
 
 static void invalidate_pte(struct hpte_cache *pte)
 {
-	dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n",
-		    i, pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+	dprintk_mmu("KVM: Flushing SPT: 0x%lx (0x%llx) -> 0x%llx\n",
+		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
 
 	ppc_md.hpte_invalidate(pte->slot, pte->host_va,
 			       MMU_PAGE_4K, MMU_SEGSIZE_256M,
 			       false);
 	pte->host_va = 0;
-	kvm_release_pfn_dirty(pte->pfn);
+
+	if (pte->pte.may_write)
+		kvm_release_pfn_dirty(pte->pfn);
+	else
+		kvm_release_pfn_clean(pte->pfn);
 }
 
-void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask)
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
 {
 	int i;
 
-	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n",
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%lx & 0x%lx\n",
 		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
 	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
 
@@ -106,12 +110,12 @@ void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
 	}
 }
 
-void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end)
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
 {
 	int i;
 
-	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
-		    vcpu->arch.hpte_cache_offset, guest_pa, pa_mask);
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%lx & 0x%lx\n",
+		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
 	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
 
 	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
@@ -182,7 +186,7 @@ static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
 	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
 	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
 	if (map->guest_vsid == gvsid) {
-		dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+		dprintk_slb("SLB: Searching: 0x%llx -> 0x%llx\n",
 			    gvsid, map->host_vsid);
 		return map;
 	}
@@ -194,7 +198,8 @@ static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
 		return map;
 	}
 
-	dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid);
+	dprintk_slb("SLB: Searching %d/%d: 0x%llx -> not found\n",
+		    sid_map_mask, SID_MAP_MASK - sid_map_mask, gvsid);
 	return NULL;
 }
 
@@ -212,7 +217,7 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 	/* Get host physical address for gpa */
 	hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
 	if (kvm_is_error_hva(hpaddr)) {
-		printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr);
+		printk(KERN_INFO "Couldn't get guest page for gfn %lx!\n", orig_pte->eaddr);
 		return -EINVAL;
 	}
 	hpaddr <<= PAGE_SHIFT;
@@ -227,10 +232,16 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
 	vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
 	map = find_sid_vsid(vcpu, vsid);
 	if (!map) {
-		kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+		ret = kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+		WARN_ON(ret < 0);
 		map = find_sid_vsid(vcpu, vsid);
 	}
-	BUG_ON(!map);
+	if (!map) {
+		printk(KERN_ERR "KVM: Segment map for 0x%llx (0x%lx) failed\n",
+				vsid, orig_pte->eaddr);
+		WARN_ON(true);
+		return -EINVAL;
+	}
 
 	vsid = map->host_vsid;
 	va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
@@ -257,26 +268,26 @@ map_again:
 
 	if (ret < 0) {
 		/* If we couldn't map a primary PTE, try a secondary */
-#ifdef USE_SECONDARY
 		hash = ~hash;
+		vflags ^= HPTE_V_SECONDARY;
 		attempt++;
-		if (attempt % 2)
-			vflags = HPTE_V_SECONDARY;
-		else
-			vflags = 0;
-#else
-		attempt = 2;
-#endif
 		goto map_again;
 	} else {
 		int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
 		struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
 
-		dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n",
+		dprintk_mmu("KVM: %c%c Map 0x%lx: [%lx] 0x%lx (0x%llx) -> %lx\n",
 			    ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
 			    (rflags & HPTE_R_N) ? '-' : 'x',
 			    orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
 
+		/* The ppc_md code may give us a secondary entry even though we
+		   asked for a primary. Fix up. */
+		if ((ret & _PTEIDX_SECONDARY) && !(vflags & HPTE_V_SECONDARY)) {
+			hash = ~hash;
+			hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+		}
+
 		pte->slot = hpteg + (ret & 7);
 		pte->host_va = va;
 		pte->pte = *orig_pte;
@@ -321,6 +332,9 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
 	map->guest_vsid = gvsid;
 	map->valid = true;
 
+	dprintk_slb("SLB: New mapping at %d: 0x%llx -> 0x%llx\n",
+		    sid_map_mask, gvsid, map->host_vsid);
+
 	return map;
 }
 
@@ -331,14 +345,14 @@ static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid)
 	int found_inval = -1;
 	int r;
 
-	if (!get_paca()->kvm_slb_max)
-		get_paca()->kvm_slb_max = 1;
+	if (!to_svcpu(vcpu)->slb_max)
+		to_svcpu(vcpu)->slb_max = 1;
 
 	/* Are we overwriting? */
-	for (i = 1; i < get_paca()->kvm_slb_max; i++) {
-		if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V))
+	for (i = 1; i < to_svcpu(vcpu)->slb_max; i++) {
+		if (!(to_svcpu(vcpu)->slb[i].esid & SLB_ESID_V))
 			found_inval = i;
-		else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid)
+		else if ((to_svcpu(vcpu)->slb[i].esid & ESID_MASK) == esid)
 			return i;
 	}
 
@@ -352,11 +366,11 @@ static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid)
 		max_slb_size = mmu_slb_size;
 
 	/* Overflowing -> purge */
-	if ((get_paca()->kvm_slb_max) == max_slb_size)
+	if ((to_svcpu(vcpu)->slb_max) == max_slb_size)
 		kvmppc_mmu_flush_segments(vcpu);
 
-	r = get_paca()->kvm_slb_max;
-	get_paca()->kvm_slb_max++;
+	r = to_svcpu(vcpu)->slb_max;
+	to_svcpu(vcpu)->slb_max++;
 
 	return r;
 }
@@ -374,7 +388,7 @@ int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
 
 	if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
 		/* Invalidate an entry */
-		get_paca()->kvm_slb[slb_index].esid = 0;
+		to_svcpu(vcpu)->slb[slb_index].esid = 0;
 		return -ENOENT;
 	}
 
@@ -388,8 +402,8 @@ int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
 	slb_vsid &= ~SLB_VSID_KP;
 	slb_esid |= slb_index;
 
-	get_paca()->kvm_slb[slb_index].esid = slb_esid;
-	get_paca()->kvm_slb[slb_index].vsid = slb_vsid;
+	to_svcpu(vcpu)->slb[slb_index].esid = slb_esid;
+	to_svcpu(vcpu)->slb[slb_index].vsid = slb_vsid;
 
 	dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid);
 
@@ -398,11 +412,29 @@ int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
 
 void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
 {
-	get_paca()->kvm_slb_max = 1;
-	get_paca()->kvm_slb[0].esid = 0;
+	to_svcpu(vcpu)->slb_max = 1;
+	to_svcpu(vcpu)->slb[0].esid = 0;
 }
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 {
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	__destroy_context(to_book3s(vcpu)->context_id);
+}
+
+int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int err;
+
+	err = __init_new_context();
+	if (err < 0)
+		return -1;
+	vcpu3s->context_id = err;
+
+	vcpu3s->vsid_max = ((vcpu3s->context_id + 1) << USER_ESID_BITS) - 1;
+	vcpu3s->vsid_first = vcpu3s->context_id << USER_ESID_BITS;
+	vcpu3s->vsid_next = vcpu3s->vsid_first;
+
+	return 0;
 }
diff --git a/arch/powerpc/kvm/book3s_64_rmhandlers.S b/arch/powerpc/kvm/book3s_64_rmhandlers.S
deleted file mode 100644
index fb7dd2e..0000000
--- a/arch/powerpc/kvm/book3s_64_rmhandlers.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/kvm_asm.h>
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-#include <asm/exception-64s.h>
-
-/*****************************************************************************
- *                                                                           *
- *        Real Mode handlers that need to be in low physical memory          *
- *                                                                           *
- ****************************************************************************/
-
-
-.macro INTERRUPT_TRAMPOLINE intno
-
-.global kvmppc_trampoline_\intno
-kvmppc_trampoline_\intno:
-
-	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
-
-	/*
-	 * First thing to do is to find out if we're coming
-	 * from a KVM guest or a Linux process.
-	 *
-	 * To distinguish, we check a magic byte in the PACA
-	 */
-	mfspr	r13, SPRN_SPRG_PACA		/* r13 = PACA */
-	std	r12, (PACA_EXMC + EX_R12)(r13)
-	mfcr	r12
-	stw	r12, (PACA_EXMC + EX_CCR)(r13)
-	lbz	r12, PACA_KVM_IN_GUEST(r13)
-	cmpwi	r12, 0
-	bne	..kvmppc_handler_hasmagic_\intno
-	/* No KVM guest? Then jump back to the Linux handler! */
-	lwz	r12, (PACA_EXMC + EX_CCR)(r13)
-	mtcr	r12
-	ld	r12, (PACA_EXMC + EX_R12)(r13)
-	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
-	b	kvmppc_resume_\intno		/* Get back original handler */
-
-	/* Now we know we're handling a KVM guest */
-..kvmppc_handler_hasmagic_\intno:
-	/* Unset guest state */
-	li	r12, 0
-	stb	r12, PACA_KVM_IN_GUEST(r13)
-
-	std	r1, (PACA_EXMC+EX_R9)(r13)
-	std	r10, (PACA_EXMC+EX_R10)(r13)
-	std	r11, (PACA_EXMC+EX_R11)(r13)
-	std	r2, (PACA_EXMC+EX_R13)(r13)
-
-	mfsrr0	r10
-	mfsrr1	r11
-
-	/* Restore R1/R2 so we can handle faults */
-	ld	r1, PACAR1(r13)
-	ld	r2, (PACA_EXMC+EX_SRR0)(r13)
-
-	/* Let's store which interrupt we're handling */
-	li	r12, \intno
-
-	/* Jump into the SLB exit code that goes to the highmem handler */
-	b	kvmppc_handler_trampoline_exit
-
-.endm
-
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSTEM_RESET
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_SEGMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_SEGMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DECREMENTER
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSCALL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_TRACE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PERFMON
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALTIVEC
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_VSX
-
-/*
- * This trampoline brings us back to a real mode handler
- *
- * Input Registers:
- *
- * R6 = SRR0
- * R7 = SRR1
- * LR = real-mode IP
- *
- */
-.global kvmppc_handler_lowmem_trampoline
-kvmppc_handler_lowmem_trampoline:
-
-	mtsrr0	r6
-	mtsrr1	r7
-	blr
-kvmppc_handler_lowmem_trampoline_end:
-
-.global kvmppc_trampoline_lowmem
-kvmppc_trampoline_lowmem:
-	.long kvmppc_handler_lowmem_trampoline - _stext
-
-.global kvmppc_trampoline_enter
-kvmppc_trampoline_enter:
-	.long kvmppc_handler_trampoline_enter - _stext
-
-#include "book3s_64_slb.S"
-
diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
index ecd237a..04e7d3b 100644
--- a/arch/powerpc/kvm/book3s_64_slb.S
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -31,7 +31,7 @@
 #define REBOLT_SLB_ENTRY(num) \
 	ld	r10, SHADOW_SLB_ESID(num)(r11); \
 	cmpdi	r10, 0; \
-	beq	slb_exit_skip_1; \
+	beq	slb_exit_skip_ ## num; \
 	oris	r10, r10, SLB_ESID_V@h; \
 	ld	r9, SHADOW_SLB_VSID(num)(r11); \
 	slbmte	r9, r10; \
@@ -44,31 +44,22 @@ slb_exit_skip_ ## num:
  *                                                                            *
  *****************************************************************************/
 
-.global kvmppc_handler_trampoline_enter
-kvmppc_handler_trampoline_enter:
+.macro LOAD_GUEST_SEGMENTS
 
 	/* Required state:
 	 *
 	 * MSR = ~IR|DR
 	 * R13 = PACA
-	 * R9 = guest IP
-	 * R10 = guest MSR
-	 * R11 = free
-	 * R12 = free
-	 * PACA[PACA_EXMC + EX_R9] = guest R9
-	 * PACA[PACA_EXMC + EX_R10] = guest R10
-	 * PACA[PACA_EXMC + EX_R11] = guest R11
-	 * PACA[PACA_EXMC + EX_R12] = guest R12
-	 * PACA[PACA_EXMC + EX_R13] = guest R13
-	 * PACA[PACA_EXMC + EX_CCR] = guest CR
-	 * PACA[PACA_EXMC + EX_R3] = guest XER
+	 * R1 = host R1
+	 * R2 = host R2
+	 * R3 = shadow vcpu
+	 * all other volatile GPRS = free
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
 	 */
 
-	mtsrr0	r9
-	mtsrr1	r10
-
-	mtspr	SPRN_SPRG_SCRATCH0, r0
-
 	/* Remove LPAR shadow entries */
 
 #if SLB_NUM_BOLTED == 3
@@ -103,14 +94,14 @@ kvmppc_handler_trampoline_enter:
 
 	/* Fill SLB with our shadow */
 
-	lbz	r12, PACA_KVM_SLB_MAX(r13)
+	lbz	r12, SVCPU_SLB_MAX(r3)
 	mulli	r12, r12, 16
-	addi	r12, r12, PACA_KVM_SLB
-	add	r12, r12, r13
+	addi	r12, r12, SVCPU_SLB
+	add	r12, r12, r3
 
 	/* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */
-	li	r11, PACA_KVM_SLB
-	add	r11, r11, r13
+	li	r11, SVCPU_SLB
+	add	r11, r11, r3
 
 slb_loop_enter:
 
@@ -129,27 +120,7 @@ slb_loop_enter_skip:
 
 slb_do_enter:
 
-	/* Enter guest */
-
-	mfspr	r0, SPRN_SPRG_SCRATCH0
-
-	ld	r9, (PACA_EXMC+EX_R9)(r13)
-	ld	r10, (PACA_EXMC+EX_R10)(r13)
-	ld	r12, (PACA_EXMC+EX_R12)(r13)
-
-	lwz	r11, (PACA_EXMC+EX_CCR)(r13)
-	mtcr	r11
-
-	ld	r11, (PACA_EXMC+EX_R3)(r13)
-	mtxer	r11
-
-	ld	r11, (PACA_EXMC+EX_R11)(r13)
-	ld	r13, (PACA_EXMC+EX_R13)(r13)
-
-	RFI
-kvmppc_handler_trampoline_enter_end:
-
-
+.endm
 
 /******************************************************************************
  *                                                                            *
@@ -157,62 +128,22 @@ kvmppc_handler_trampoline_enter_end:
  *                                                                            *
  *****************************************************************************/
 
-.global kvmppc_handler_trampoline_exit
-kvmppc_handler_trampoline_exit:
+.macro LOAD_HOST_SEGMENTS
 
 	/* Register usage at this point:
 	 *
-	 * SPRG_SCRATCH0 = guest R13
-	 * R01           = host R1
-	 * R02           = host R2
-	 * R10           = guest PC
-	 * R11           = guest MSR
-	 * R12           = exit handler id
-	 * R13           = PACA
-	 * PACA.exmc.CCR  = guest CR
-	 * PACA.exmc.R9  = guest R1
-	 * PACA.exmc.R10 = guest R10
-	 * PACA.exmc.R11 = guest R11
-	 * PACA.exmc.R12 = guest R12
-	 * PACA.exmc.R13 = guest R2
+	 * R1         = host R1
+	 * R2         = host R2
+	 * R12        = exit handler id
+	 * R13        = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.*    = guest *
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
 	 *
 	 */
 
-	/* Save registers */
-
-	std	r0, (PACA_EXMC+EX_SRR0)(r13)
-	std	r9, (PACA_EXMC+EX_R3)(r13)
-	std	r10, (PACA_EXMC+EX_LR)(r13)
-	std	r11, (PACA_EXMC+EX_DAR)(r13)
-
-	/*
-	 * In order for us to easily get the last instruction,
-	 * we got the #vmexit at, we exploit the fact that the
-	 * virtual layout is still the same here, so we can just
-	 * ld from the guest's PC address
-	 */
-
-	/* We only load the last instruction when it's safe */
-	cmpwi	r12, BOOK3S_INTERRUPT_DATA_STORAGE
-	beq	ld_last_inst
-	cmpwi	r12, BOOK3S_INTERRUPT_PROGRAM
-	beq	ld_last_inst
-
-	b	no_ld_last_inst
-
-ld_last_inst:
-	/* Save off the guest instruction we're at */
-	/*    1) enable paging for data */
-	mfmsr	r9
-	ori	r11, r9, MSR_DR			/* Enable paging for data */
-	mtmsr	r11
-	/*    2) fetch the instruction */
-	lwz	r0, 0(r10)
-	/*    3) disable paging again */
-	mtmsr	r9
-
-no_ld_last_inst:
-
 	/* Restore bolted entries from the shadow and fix it along the way */
 
 	/* We don't store anything in entry 0, so we don't need to take care of it */
@@ -233,30 +164,4 @@ no_ld_last_inst:
 
 slb_do_exit:
 
-	/* Restore registers */
-
-	ld	r11, (PACA_EXMC+EX_DAR)(r13)
-	ld	r10, (PACA_EXMC+EX_LR)(r13)
-	ld	r9, (PACA_EXMC+EX_R3)(r13)
-
-	/* Save last inst */
-	stw	r0, (PACA_EXMC+EX_LR)(r13)
-
-	/* Save DAR and DSISR before going to paged mode */
-	mfdar	r0
-	std	r0, (PACA_EXMC+EX_DAR)(r13)
-	mfdsisr	r0
-	stw	r0, (PACA_EXMC+EX_DSISR)(r13)
-
-	/* RFI into the highmem handler */
-	mfmsr	r0
-	ori	r0, r0, MSR_IR|MSR_DR|MSR_RI	/* Enable paging */
-	mtsrr1	r0
-	ld	r0, PACASAVEDMSR(r13)		/* Highmem handler address */
-	mtsrr0	r0
-
-	mfspr	r0, SPRN_SPRG_SCRATCH0
-
-	RFI
-kvmppc_handler_trampoline_exit_end:
-
+.endm
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
new file mode 100644
index 0000000..c85f906
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -0,0 +1,573 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/reg.h>
+
+#define OP_19_XOP_RFID		18
+#define OP_19_XOP_RFI		50
+
+#define OP_31_XOP_MFMSR		83
+#define OP_31_XOP_MTMSR		146
+#define OP_31_XOP_MTMSRD	178
+#define OP_31_XOP_MTSR		210
+#define OP_31_XOP_MTSRIN	242
+#define OP_31_XOP_TLBIEL	274
+#define OP_31_XOP_TLBIE		306
+#define OP_31_XOP_SLBMTE	402
+#define OP_31_XOP_SLBIE		434
+#define OP_31_XOP_SLBIA		498
+#define OP_31_XOP_MFSR		595
+#define OP_31_XOP_MFSRIN	659
+#define OP_31_XOP_DCBA		758
+#define OP_31_XOP_SLBMFEV	851
+#define OP_31_XOP_EIOIO		854
+#define OP_31_XOP_SLBMFEE	915
+
+/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
+#define OP_31_XOP_DCBZ		1010
+
+#define OP_LFS			48
+#define OP_LFD			50
+#define OP_STFS			52
+#define OP_STFD			54
+
+#define SPRN_GQR0		912
+#define SPRN_GQR1		913
+#define SPRN_GQR2		914
+#define SPRN_GQR3		915
+#define SPRN_GQR4		916
+#define SPRN_GQR5		917
+#define SPRN_GQR6		918
+#define SPRN_GQR7		919
+
+/* Book3S_32 defines mfsrin(v) - but that messes up our abstract
+ * function pointers, so let's just disable the define. */
+#undef mfsrin
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                           unsigned int inst, int *advance)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (get_op(inst)) {
+	case 19:
+		switch (get_xop(inst)) {
+		case OP_19_XOP_RFID:
+		case OP_19_XOP_RFI:
+			kvmppc_set_pc(vcpu, vcpu->arch.srr0);
+			kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+			*advance = 0;
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+			break;
+		}
+		break;
+	case 31:
+		switch (get_xop(inst)) {
+		case OP_31_XOP_MFMSR:
+			kvmppc_set_gpr(vcpu, get_rt(inst), vcpu->arch.msr);
+			break;
+		case OP_31_XOP_MTMSRD:
+		{
+			ulong rs = kvmppc_get_gpr(vcpu, get_rs(inst));
+			if (inst & 0x10000) {
+				vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
+				vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
+			} else
+				kvmppc_set_msr(vcpu, rs);
+			break;
+		}
+		case OP_31_XOP_MTMSR:
+			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_MFSR:
+		{
+			int srnum;
+
+			srnum = kvmppc_get_field(inst, 12 + 32, 15 + 32);
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
+		case OP_31_XOP_MFSRIN:
+		{
+			int srnum;
+
+			srnum = (kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf;
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
+		case OP_31_XOP_MTSR:
+			vcpu->arch.mmu.mtsrin(vcpu,
+				(inst >> 16) & 0xf,
+				kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_MTSRIN:
+			vcpu->arch.mmu.mtsrin(vcpu,
+				(kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf,
+				kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_TLBIE:
+		case OP_31_XOP_TLBIEL:
+		{
+			bool large = (inst & 0x00200000) ? true : false;
+			ulong addr = kvmppc_get_gpr(vcpu, get_rb(inst));
+			vcpu->arch.mmu.tlbie(vcpu, addr, large);
+			break;
+		}
+		case OP_31_XOP_EIOIO:
+			break;
+		case OP_31_XOP_SLBMTE:
+			if (!vcpu->arch.mmu.slbmte)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbmte(vcpu,
+					kvmppc_get_gpr(vcpu, get_rs(inst)),
+					kvmppc_get_gpr(vcpu, get_rb(inst)));
+			break;
+		case OP_31_XOP_SLBIE:
+			if (!vcpu->arch.mmu.slbie)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbie(vcpu,
+					kvmppc_get_gpr(vcpu, get_rb(inst)));
+			break;
+		case OP_31_XOP_SLBIA:
+			if (!vcpu->arch.mmu.slbia)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbia(vcpu);
+			break;
+		case OP_31_XOP_SLBMFEE:
+			if (!vcpu->arch.mmu.slbmfee) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+				t = vcpu->arch.mmu.slbmfee(vcpu, rb);
+				kvmppc_set_gpr(vcpu, get_rt(inst), t);
+			}
+			break;
+		case OP_31_XOP_SLBMFEV:
+			if (!vcpu->arch.mmu.slbmfev) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+				t = vcpu->arch.mmu.slbmfev(vcpu, rb);
+				kvmppc_set_gpr(vcpu, get_rt(inst), t);
+			}
+			break;
+		case OP_31_XOP_DCBA:
+			/* Gets treated as NOP */
+			break;
+		case OP_31_XOP_DCBZ:
+		{
+			ulong rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+			ulong ra = 0;
+			ulong addr, vaddr;
+			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+			u32 dsisr;
+			int r;
+
+			if (get_ra(inst))
+				ra = kvmppc_get_gpr(vcpu, get_ra(inst));
+
+			addr = (ra + rb) & ~31ULL;
+			if (!(vcpu->arch.msr & MSR_SF))
+				addr &= 0xffffffff;
+			vaddr = addr;
+
+			r = kvmppc_st(vcpu, &addr, 32, zeros, true);
+			if ((r == -ENOENT) || (r == -EPERM)) {
+				*advance = 0;
+				vcpu->arch.dear = vaddr;
+				to_svcpu(vcpu)->fault_dar = vaddr;
+
+				dsisr = DSISR_ISSTORE;
+				if (r == -ENOENT)
+					dsisr |= DSISR_NOHPTE;
+				else if (r == -EPERM)
+					dsisr |= DSISR_PROTFAULT;
+
+				to_book3s(vcpu)->dsisr = dsisr;
+				to_svcpu(vcpu)->fault_dsisr = dsisr;
+
+				kvmppc_book3s_queue_irqprio(vcpu,
+					BOOK3S_INTERRUPT_DATA_STORAGE);
+			}
+
+			break;
+		}
+		default:
+			emulated = EMULATE_FAIL;
+		}
+		break;
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	if (emulated == EMULATE_FAIL)
+		emulated = kvmppc_emulate_paired_single(run, vcpu);
+
+	return emulated;
+}
+
+void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
+                    u32 val)
+{
+	if (upper) {
+		/* Upper BAT */
+		u32 bl = (val >> 2) & 0x7ff;
+		bat->bepi_mask = (~bl << 17);
+		bat->bepi = val & 0xfffe0000;
+		bat->vs = (val & 2) ? 1 : 0;
+		bat->vp = (val & 1) ? 1 : 0;
+		bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
+	} else {
+		/* Lower BAT */
+		bat->brpn = val & 0xfffe0000;
+		bat->wimg = (val >> 3) & 0xf;
+		bat->pp = val & 3;
+		bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
+	}
+}
+
+static u32 kvmppc_read_bat(struct kvm_vcpu *vcpu, int sprn)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	if (sprn % 2)
+		return bat->raw >> 32;
+	else
+		return bat->raw;
+}
+
+static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+	int emulated = EMULATE_DONE;
+	ulong spr_val = kvmppc_get_gpr(vcpu, rs);
+
+	switch (sprn) {
+	case SPRN_SDR1:
+		to_book3s(vcpu)->sdr1 = spr_val;
+		break;
+	case SPRN_DSISR:
+		to_book3s(vcpu)->dsisr = spr_val;
+		break;
+	case SPRN_DAR:
+		vcpu->arch.dear = spr_val;
+		break;
+	case SPRN_HIOR:
+		to_book3s(vcpu)->hior = spr_val;
+		break;
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_write_bat(vcpu, sprn, (u32)spr_val);
+		/* BAT writes happen so rarely that we're ok to flush
+		 * everything here */
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
+		break;
+	case SPRN_HID0:
+		to_book3s(vcpu)->hid[0] = spr_val;
+		break;
+	case SPRN_HID1:
+		to_book3s(vcpu)->hid[1] = spr_val;
+		break;
+	case SPRN_HID2:
+		to_book3s(vcpu)->hid[2] = spr_val;
+		break;
+	case SPRN_HID2_GEKKO:
+		to_book3s(vcpu)->hid[2] = spr_val;
+		/* HID2.PSE controls paired single on gekko */
+		switch (vcpu->arch.pvr) {
+		case 0x00080200:	/* lonestar 2.0 */
+		case 0x00088202:	/* lonestar 2.2 */
+		case 0x70000100:	/* gekko 1.0 */
+		case 0x00080100:	/* gekko 2.0 */
+		case 0x00083203:	/* gekko 2.3a */
+		case 0x00083213:	/* gekko 2.3b */
+		case 0x00083204:	/* gekko 2.4 */
+		case 0x00083214:	/* gekko 2.4e (8SE) - retail HW2 */
+		case 0x00087200:	/* broadway */
+			if (vcpu->arch.hflags & BOOK3S_HFLAG_NATIVE_PS) {
+				/* Native paired singles */
+			} else if (spr_val & (1 << 29)) { /* HID2.PSE */
+				vcpu->arch.hflags |= BOOK3S_HFLAG_PAIRED_SINGLE;
+				kvmppc_giveup_ext(vcpu, MSR_FP);
+			} else {
+				vcpu->arch.hflags &= ~BOOK3S_HFLAG_PAIRED_SINGLE;
+			}
+			break;
+		}
+		break;
+	case SPRN_HID4:
+	case SPRN_HID4_GEKKO:
+		to_book3s(vcpu)->hid[4] = spr_val;
+		break;
+	case SPRN_HID5:
+		to_book3s(vcpu)->hid[5] = spr_val;
+		/* guest HID5 set can change is_dcbz32 */
+		if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+		    (mfmsr() & MSR_HV))
+			vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+		break;
+	case SPRN_GQR0:
+	case SPRN_GQR1:
+	case SPRN_GQR2:
+	case SPRN_GQR3:
+	case SPRN_GQR4:
+	case SPRN_GQR5:
+	case SPRN_GQR6:
+	case SPRN_GQR7:
+		to_book3s(vcpu)->gqr[sprn - SPRN_GQR0] = spr_val;
+		break;
+	case SPRN_ICTC:
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+	case SPRN_L2CR:
+	case SPRN_MMCR0_GEKKO:
+	case SPRN_MMCR1_GEKKO:
+	case SPRN_PMC1_GEKKO:
+	case SPRN_PMC2_GEKKO:
+	case SPRN_PMC3_GEKKO:
+	case SPRN_PMC4_GEKKO:
+	case SPRN_WPAR_GEKKO:
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_set_gpr(vcpu, rt, kvmppc_read_bat(vcpu, sprn));
+		break;
+	case SPRN_SDR1:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
+		break;
+	case SPRN_DSISR:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->dsisr);
+		break;
+	case SPRN_DAR:
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dear);
+		break;
+	case SPRN_HIOR:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hior);
+		break;
+	case SPRN_HID0:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[0]);
+		break;
+	case SPRN_HID1:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[1]);
+		break;
+	case SPRN_HID2:
+	case SPRN_HID2_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[2]);
+		break;
+	case SPRN_HID4:
+	case SPRN_HID4_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[4]);
+		break;
+	case SPRN_HID5:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[5]);
+		break;
+	case SPRN_GQR0:
+	case SPRN_GQR1:
+	case SPRN_GQR2:
+	case SPRN_GQR3:
+	case SPRN_GQR4:
+	case SPRN_GQR5:
+	case SPRN_GQR6:
+	case SPRN_GQR7:
+		kvmppc_set_gpr(vcpu, rt,
+			       to_book3s(vcpu)->gqr[sprn - SPRN_GQR0]);
+		break;
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+	case SPRN_L2CR:
+	case SPRN_MMCR0_GEKKO:
+	case SPRN_MMCR1_GEKKO:
+	case SPRN_PMC1_GEKKO:
+	case SPRN_PMC2_GEKKO:
+	case SPRN_PMC3_GEKKO:
+	case SPRN_PMC4_GEKKO:
+	case SPRN_WPAR_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, 0);
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
+u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	u32 dsisr = 0;
+
+	/*
+	 * This is what the spec says about DSISR bits (not mentioned = 0):
+	 *
+	 * 12:13		[DS]	Set to bits 30:31
+	 * 15:16		[X]	Set to bits 29:30
+	 * 17			[X]	Set to bit 25
+	 *			[D/DS]	Set to bit 5
+	 * 18:21		[X]	Set to bits 21:24
+	 *			[D/DS]	Set to bits 1:4
+	 * 22:26			Set to bits 6:10 (RT/RS/FRT/FRS)
+	 * 27:31			Set to bits 11:15 (RA)
+	 */
+
+	switch (get_op(inst)) {
+	/* D-form */
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		dsisr |= (inst >> 12) & 0x4000;	/* bit 17 */
+		dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */
+		break;
+	/* X-form */
+	case 31:
+		dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */
+		dsisr |= (inst << 8)  & 0x04000; /* bit 17 */
+		dsisr |= (inst << 3)  & 0x03c00; /* bits 18:21 */
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */
+
+	return dsisr;
+}
+
+ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	ulong dar = 0;
+	ulong ra;
+
+	switch (get_op(inst)) {
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += (s32)((s16)inst);
+		break;
+	case 31:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += kvmppc_get_gpr(vcpu, get_rb(inst));
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	return dar;
+}
diff --git a/arch/powerpc/kvm/book3s_exports.c b/arch/powerpc/kvm/book3s_exports.c
new file mode 100644
index 0000000..1dd5a1d
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_exports.c
@@ -0,0 +1,32 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/module.h>
+#include <asm/kvm_book3s.h>
+
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
+EXPORT_SYMBOL_GPL(kvmppc_rmcall);
+EXPORT_SYMBOL_GPL(kvmppc_load_up_fpu);
+#ifdef CONFIG_ALTIVEC
+EXPORT_SYMBOL_GPL(kvmppc_load_up_altivec);
+#endif
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL_GPL(kvmppc_load_up_vsx);
+#endif
diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S
new file mode 100644
index 0000000..2f0bc92
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_interrupts.S
@@ -0,0 +1,320 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define ULONG_SIZE 		8
+#define FUNC(name) 		GLUE(.,name)
+
+#define GET_SHADOW_VCPU(reg)    \
+        addi    reg, r13, PACA_KVM_SVCPU
+
+#define DISABLE_INTERRUPTS	\
+	mfmsr   r0;		\
+	rldicl  r0,r0,48,1;	\
+	rotldi  r0,r0,16;	\
+	mtmsrd  r0,1;		\
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define ULONG_SIZE              4
+#define FUNC(name)		name
+
+#define GET_SHADOW_VCPU(reg)    \
+        lwz     reg, (THREAD + THREAD_KVM_SVCPU)(r2)
+
+#define DISABLE_INTERRUPTS	\
+	mfmsr   r0;		\
+	rlwinm  r0,r0,0,17,15;	\
+	mtmsr   r0;		\
+
+#endif /* CONFIG_PPC_BOOK3S_XX */
+
+
+#define VCPU_GPR(n)		(VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_LOAD_NVGPRS(vcpu) \
+	PPC_LL	r14, VCPU_GPR(r14)(vcpu); \
+	PPC_LL	r15, VCPU_GPR(r15)(vcpu); \
+	PPC_LL	r16, VCPU_GPR(r16)(vcpu); \
+	PPC_LL	r17, VCPU_GPR(r17)(vcpu); \
+	PPC_LL	r18, VCPU_GPR(r18)(vcpu); \
+	PPC_LL	r19, VCPU_GPR(r19)(vcpu); \
+	PPC_LL	r20, VCPU_GPR(r20)(vcpu); \
+	PPC_LL	r21, VCPU_GPR(r21)(vcpu); \
+	PPC_LL	r22, VCPU_GPR(r22)(vcpu); \
+	PPC_LL	r23, VCPU_GPR(r23)(vcpu); \
+	PPC_LL	r24, VCPU_GPR(r24)(vcpu); \
+	PPC_LL	r25, VCPU_GPR(r25)(vcpu); \
+	PPC_LL	r26, VCPU_GPR(r26)(vcpu); \
+	PPC_LL	r27, VCPU_GPR(r27)(vcpu); \
+	PPC_LL	r28, VCPU_GPR(r28)(vcpu); \
+	PPC_LL	r29, VCPU_GPR(r29)(vcpu); \
+	PPC_LL	r30, VCPU_GPR(r30)(vcpu); \
+	PPC_LL	r31, VCPU_GPR(r31)(vcpu); \
+
+/*****************************************************************************
+ *                                                                           *
+ *     Guest entry / exit code that is in kernel module memory (highmem)     *
+ *                                                                           *
+ ****************************************************************************/
+
+/* Registers:
+ *  r3: kvm_run pointer
+ *  r4: vcpu pointer
+ */
+_GLOBAL(__kvmppc_vcpu_entry)
+
+kvm_start_entry:
+	/* Write correct stack frame */
+	mflr	r0
+	PPC_STL	r0,PPC_LR_STKOFF(r1)
+
+	/* Save host state to the stack */
+	PPC_STLU r1, -SWITCH_FRAME_SIZE(r1)
+
+	/* Save r3 (kvm_run) and r4 (vcpu) */
+	SAVE_2GPRS(3, r1)
+
+	/* Save non-volatile registers (r14 - r31) */
+	SAVE_NVGPRS(r1)
+
+	/* Save LR */
+	PPC_STL	r0, _LINK(r1)
+
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
+
+	GET_SHADOW_VCPU(r5)
+
+	/* Save R1/R2 in the PACA */
+	PPC_STL	r1, SVCPU_HOST_R1(r5)
+	PPC_STL	r2, SVCPU_HOST_R2(r5)
+
+	/* XXX swap in/out on load? */
+	PPC_LL	r3, VCPU_HIGHMEM_HANDLER(r4)
+	PPC_STL	r3, SVCPU_VMHANDLER(r5)
+
+kvm_start_lightweight:
+
+	PPC_LL	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
+
+	DISABLE_INTERRUPTS
+
+#ifdef CONFIG_PPC_BOOK3S_64
+	/* Some guests may need to have dcbz set to 32 byte length.
+	 *
+	 * Usually we ensure that by patching the guest's instructions
+	 * to trap on dcbz and emulate it in the hypervisor.
+	 *
+	 * If we can, we should tell the CPU to use 32 byte dcbz though,
+	 * because that's a lot faster.
+	 */
+
+	PPC_LL	r3, VCPU_HFLAGS(r4)
+	rldicl.	r3, r3, 0, 63		/* CR = ((r3 & 1) == 0) */
+	beq	no_dcbz32_on
+
+	mfspr   r3,SPRN_HID5
+	ori     r3, r3, 0x80		/* XXX HID5_dcbz32 = 0x80 */
+	mtspr   SPRN_HID5,r3
+
+no_dcbz32_on:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+	PPC_LL	r6, VCPU_RMCALL(r4)
+	mtctr	r6
+
+	PPC_LL	r3, VCPU_TRAMPOLINE_ENTER(r4)
+	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+
+	/* Jump to segment patching handler and into our guest */
+	bctr
+
+/*
+ * This is the handler in module memory. It gets jumped at from the
+ * lowmem trampoline code, so it's basically the guest exit code.
+ *
+ */
+
+.global kvmppc_handler_highmem
+kvmppc_handler_highmem:
+
+	/*
+	 * Register usage at this point:
+	 *
+	 * R1       = host R1
+	 * R2       = host R2
+	 * R12      = exit handler id
+	 * R13      = PACA
+	 * SVCPU.*  = guest *
+	 *
+	 */
+
+	/* R7 = vcpu */
+	PPC_LL	r7, GPR4(r1)
+
+#ifdef CONFIG_PPC_BOOK3S_64
+
+	PPC_LL	r5, VCPU_HFLAGS(r7)
+	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
+	beq	no_dcbz32_off
+
+	li	r4, 0
+	mfspr   r5,SPRN_HID5
+	rldimi  r5,r4,6,56
+	mtspr   SPRN_HID5,r5
+
+no_dcbz32_off:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+	PPC_STL	r14, VCPU_GPR(r14)(r7)
+	PPC_STL	r15, VCPU_GPR(r15)(r7)
+	PPC_STL	r16, VCPU_GPR(r16)(r7)
+	PPC_STL	r17, VCPU_GPR(r17)(r7)
+	PPC_STL	r18, VCPU_GPR(r18)(r7)
+	PPC_STL	r19, VCPU_GPR(r19)(r7)
+	PPC_STL	r20, VCPU_GPR(r20)(r7)
+	PPC_STL	r21, VCPU_GPR(r21)(r7)
+	PPC_STL	r22, VCPU_GPR(r22)(r7)
+	PPC_STL	r23, VCPU_GPR(r23)(r7)
+	PPC_STL	r24, VCPU_GPR(r24)(r7)
+	PPC_STL	r25, VCPU_GPR(r25)(r7)
+	PPC_STL	r26, VCPU_GPR(r26)(r7)
+	PPC_STL	r27, VCPU_GPR(r27)(r7)
+	PPC_STL	r28, VCPU_GPR(r28)(r7)
+	PPC_STL	r29, VCPU_GPR(r29)(r7)
+	PPC_STL	r30, VCPU_GPR(r30)(r7)
+	PPC_STL	r31, VCPU_GPR(r31)(r7)
+
+	/* Restore host msr -> SRR1 */
+	PPC_LL	r6, VCPU_HOST_MSR(r7)
+
+	/*
+	 * For some interrupts, we need to call the real Linux
+	 * handler, so it can do work for us. This has to happen
+	 * as if the interrupt arrived from the kernel though,
+	 * so let's fake it here where most state is restored.
+	 *
+	 * Call Linux for hardware interrupts/decrementer
+	 * r3 = address of interrupt handler (exit reason)
+	 */
+
+	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
+	beq	call_linux_handler
+	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
+	beq	call_linux_handler
+	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
+	beq	call_linux_handler
+
+	/* Back to EE=1 */
+	mtmsr	r6
+	sync
+	b	kvm_return_point
+
+call_linux_handler:
+
+	/*
+	 * If we land here we need to jump back to the handler we
+	 * came from.
+	 *
+	 * We have a page that we can access from real mode, so let's
+	 * jump back to that and use it as a trampoline to get back into the
+	 * interrupt handler!
+	 *
+	 * R3 still contains the exit code,
+	 * R5 VCPU_HOST_RETIP and
+	 * R6 VCPU_HOST_MSR
+	 */
+
+	/* Restore host IP -> SRR0 */
+	PPC_LL	r5, VCPU_HOST_RETIP(r7)
+
+	/* XXX Better move to a safe function?
+	 *     What if we get an HTAB flush in between mtsrr0 and mtsrr1? */
+
+	mtlr	r12
+
+	PPC_LL	r4, VCPU_TRAMPOLINE_LOWMEM(r7)
+	mtsrr0	r4
+	LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+	mtsrr1	r3
+
+	RFI
+
+.global kvm_return_point
+kvm_return_point:
+
+	/* Jump back to lightweight entry if we're supposed to */
+	/* go back into the guest */
+
+	/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
+	mr	r5, r12
+
+	/* Restore r3 (kvm_run) and r4 (vcpu) */
+	REST_2GPRS(3, r1)
+	bl	FUNC(kvmppc_handle_exit)
+
+	/* If RESUME_GUEST, get back in the loop */
+	cmpwi	r3, RESUME_GUEST
+	beq	kvm_loop_lightweight
+
+	cmpwi	r3, RESUME_GUEST_NV
+	beq	kvm_loop_heavyweight
+
+kvm_exit_loop:
+
+	PPC_LL	r4, _LINK(r1)
+	mtlr	r4
+
+	/* Restore non-volatile host registers (r14 - r31) */
+	REST_NVGPRS(r1)
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+	blr
+
+kvm_loop_heavyweight:
+
+	PPC_LL	r4, _LINK(r1)
+	PPC_STL r4, (PPC_LR_STKOFF + SWITCH_FRAME_SIZE)(r1)
+
+	/* Load vcpu and cpu_run */
+	REST_2GPRS(3, r1)
+
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
+
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
+
+kvm_loop_lightweight:
+
+	/* We'll need the vcpu pointer */
+	REST_GPR(4, r1)
+
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c
new file mode 100644
index 0000000..a9f66ab
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_paired_singles.c
@@ -0,0 +1,1289 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright Novell Inc 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm.h>
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/kvm_fpu.h>
+#include <asm/reg.h>
+#include <asm/cacheflush.h>
+#include <linux/vmalloc.h>
+
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define dprintk printk
+#else
+#define dprintk(...) do { } while(0);
+#endif
+
+#define OP_LFS			48
+#define OP_LFSU			49
+#define OP_LFD			50
+#define OP_LFDU			51
+#define OP_STFS			52
+#define OP_STFSU		53
+#define OP_STFD			54
+#define OP_STFDU		55
+#define OP_PSQ_L		56
+#define OP_PSQ_LU		57
+#define OP_PSQ_ST		60
+#define OP_PSQ_STU		61
+
+#define OP_31_LFSX		535
+#define OP_31_LFSUX		567
+#define OP_31_LFDX		599
+#define OP_31_LFDUX		631
+#define OP_31_STFSX		663
+#define OP_31_STFSUX		695
+#define OP_31_STFX		727
+#define OP_31_STFUX		759
+#define OP_31_LWIZX		887
+#define OP_31_STFIWX		983
+
+#define OP_59_FADDS		21
+#define OP_59_FSUBS		20
+#define OP_59_FSQRTS		22
+#define OP_59_FDIVS		18
+#define OP_59_FRES		24
+#define OP_59_FMULS		25
+#define OP_59_FRSQRTES		26
+#define OP_59_FMSUBS		28
+#define OP_59_FMADDS		29
+#define OP_59_FNMSUBS		30
+#define OP_59_FNMADDS		31
+
+#define OP_63_FCMPU		0
+#define OP_63_FCPSGN		8
+#define OP_63_FRSP		12
+#define OP_63_FCTIW		14
+#define OP_63_FCTIWZ		15
+#define OP_63_FDIV		18
+#define OP_63_FADD		21
+#define OP_63_FSQRT		22
+#define OP_63_FSEL		23
+#define OP_63_FRE		24
+#define OP_63_FMUL		25
+#define OP_63_FRSQRTE		26
+#define OP_63_FMSUB		28
+#define OP_63_FMADD		29
+#define OP_63_FNMSUB		30
+#define OP_63_FNMADD		31
+#define OP_63_FCMPO		32
+#define OP_63_MTFSB1		38 // XXX
+#define OP_63_FSUB		20
+#define OP_63_FNEG		40
+#define OP_63_MCRFS		64
+#define OP_63_MTFSB0		70
+#define OP_63_FMR		72
+#define OP_63_MTFSFI		134
+#define OP_63_FABS		264
+#define OP_63_MFFS		583
+#define OP_63_MTFSF		711
+
+#define OP_4X_PS_CMPU0		0
+#define OP_4X_PSQ_LX		6
+#define OP_4XW_PSQ_STX		7
+#define OP_4A_PS_SUM0		10
+#define OP_4A_PS_SUM1		11
+#define OP_4A_PS_MULS0		12
+#define OP_4A_PS_MULS1		13
+#define OP_4A_PS_MADDS0		14
+#define OP_4A_PS_MADDS1		15
+#define OP_4A_PS_DIV		18
+#define OP_4A_PS_SUB		20
+#define OP_4A_PS_ADD		21
+#define OP_4A_PS_SEL		23
+#define OP_4A_PS_RES		24
+#define OP_4A_PS_MUL		25
+#define OP_4A_PS_RSQRTE		26
+#define OP_4A_PS_MSUB		28
+#define OP_4A_PS_MADD		29
+#define OP_4A_PS_NMSUB		30
+#define OP_4A_PS_NMADD		31
+#define OP_4X_PS_CMPO0		32
+#define OP_4X_PSQ_LUX		38
+#define OP_4XW_PSQ_STUX		39
+#define OP_4X_PS_NEG		40
+#define OP_4X_PS_CMPU1		64
+#define OP_4X_PS_MR		72
+#define OP_4X_PS_CMPO1		96
+#define OP_4X_PS_NABS		136
+#define OP_4X_PS_ABS		264
+#define OP_4X_PS_MERGE00	528
+#define OP_4X_PS_MERGE01	560
+#define OP_4X_PS_MERGE10	592
+#define OP_4X_PS_MERGE11	624
+
+#define SCALAR_NONE		0
+#define SCALAR_HIGH		(1 << 0)
+#define SCALAR_LOW		(1 << 1)
+#define SCALAR_NO_PS0		(1 << 2)
+#define SCALAR_NO_PS1		(1 << 3)
+
+#define GQR_ST_TYPE_MASK	0x00000007
+#define GQR_ST_TYPE_SHIFT	0
+#define GQR_ST_SCALE_MASK	0x00003f00
+#define GQR_ST_SCALE_SHIFT	8
+#define GQR_LD_TYPE_MASK	0x00070000
+#define GQR_LD_TYPE_SHIFT	16
+#define GQR_LD_SCALE_MASK	0x3f000000
+#define GQR_LD_SCALE_SHIFT	24
+
+#define GQR_QUANTIZE_FLOAT	0
+#define GQR_QUANTIZE_U8		4
+#define GQR_QUANTIZE_U16	5
+#define GQR_QUANTIZE_S8		6
+#define GQR_QUANTIZE_S16	7
+
+#define FPU_LS_SINGLE		0
+#define FPU_LS_DOUBLE		1
+#define FPU_LS_SINGLE_LOW	2
+
+static inline void kvmppc_sync_qpr(struct kvm_vcpu *vcpu, int rt)
+{
+	struct thread_struct t;
+
+	t.fpscr.val = vcpu->arch.fpscr;
+	cvt_df((double*)&vcpu->arch.fpr[rt], (float*)&vcpu->arch.qpr[rt], &t);
+}
+
+static void kvmppc_inject_pf(struct kvm_vcpu *vcpu, ulong eaddr, bool is_store)
+{
+	u64 dsisr;
+
+	vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 36, 0);
+	vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
+	vcpu->arch.dear = eaddr;
+	/* Page Fault */
+	dsisr = kvmppc_set_field(0, 33, 33, 1);
+	if (is_store)
+		to_book3s(vcpu)->dsisr = kvmppc_set_field(dsisr, 38, 38, 1);
+	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DATA_STORAGE);
+}
+
+static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				   int rs, ulong addr, int ls_type)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	char tmp[8];
+	int len = sizeof(u32);
+
+	if (ls_type == FPU_LS_DOUBLE)
+		len = sizeof(u64);
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* read from memory */
+	r = kvmppc_ld(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, false);
+		goto done_load;
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FPR | rs, len, 1);
+		goto done_load;
+	}
+
+	emulated = EMULATE_DONE;
+
+	/* put in registers */
+	switch (ls_type) {
+	case FPU_LS_SINGLE:
+		cvt_fd((float*)tmp, (double*)&vcpu->arch.fpr[rs], &t);
+		vcpu->arch.qpr[rs] = *((u32*)tmp);
+		break;
+	case FPU_LS_DOUBLE:
+		vcpu->arch.fpr[rs] = *((u64*)tmp);
+		break;
+	}
+
+	dprintk(KERN_INFO "KVM: FPR_LD [0x%llx] at 0x%lx (%d)\n", *(u64*)tmp,
+			  addr, len);
+
+done_load:
+	return emulated;
+}
+
+static int kvmppc_emulate_fpr_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				    int rs, ulong addr, int ls_type)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	char tmp[8];
+	u64 val;
+	int len;
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	switch (ls_type) {
+	case FPU_LS_SINGLE:
+		cvt_df((double*)&vcpu->arch.fpr[rs], (float*)tmp, &t);
+		val = *((u32*)tmp);
+		len = sizeof(u32);
+		break;
+	case FPU_LS_SINGLE_LOW:
+		*((u32*)tmp) = vcpu->arch.fpr[rs];
+		val = vcpu->arch.fpr[rs] & 0xffffffff;
+		len = sizeof(u32);
+		break;
+	case FPU_LS_DOUBLE:
+		*((u64*)tmp) = vcpu->arch.fpr[rs];
+		val = vcpu->arch.fpr[rs];
+		len = sizeof(u64);
+		break;
+	default:
+		val = 0;
+		len = 0;
+	}
+
+	r = kvmppc_st(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, true);
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_store(run, vcpu, val, len, 1);
+	} else {
+		emulated = EMULATE_DONE;
+	}
+
+	dprintk(KERN_INFO "KVM: FPR_ST [0x%llx] at 0x%lx (%d)\n",
+			  val, addr, len);
+
+	return emulated;
+}
+
+static int kvmppc_emulate_psq_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				   int rs, ulong addr, bool w, int i)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	float one = 1.0;
+	u32 tmp[2];
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* read from memory */
+	if (w) {
+		r = kvmppc_ld(vcpu, &addr, sizeof(u32), tmp, true);
+		memcpy(&tmp[1], &one, sizeof(u32));
+	} else {
+		r = kvmppc_ld(vcpu, &addr, sizeof(u32) * 2, tmp, true);
+	}
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, false);
+		goto done_load;
+	} else if ((r == EMULATE_DO_MMIO) && w) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FPR | rs, 4, 1);
+		vcpu->arch.qpr[rs] = tmp[1];
+		goto done_load;
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FQPR | rs, 8, 1);
+		goto done_load;
+	}
+
+	emulated = EMULATE_DONE;
+
+	/* put in registers */
+	cvt_fd((float*)&tmp[0], (double*)&vcpu->arch.fpr[rs], &t);
+	vcpu->arch.qpr[rs] = tmp[1];
+
+	dprintk(KERN_INFO "KVM: PSQ_LD [0x%x, 0x%x] at 0x%lx (%d)\n", tmp[0],
+			  tmp[1], addr, w ? 4 : 8);
+
+done_load:
+	return emulated;
+}
+
+static int kvmppc_emulate_psq_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				    int rs, ulong addr, bool w, int i)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	u32 tmp[2];
+	int len = w ? sizeof(u32) : sizeof(u64);
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	cvt_df((double*)&vcpu->arch.fpr[rs], (float*)&tmp[0], &t);
+	tmp[1] = vcpu->arch.qpr[rs];
+
+	r = kvmppc_st(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, true);
+	} else if ((r == EMULATE_DO_MMIO) && w) {
+		emulated = kvmppc_handle_store(run, vcpu, tmp[0], 4, 1);
+	} else if (r == EMULATE_DO_MMIO) {
+		u64 val = ((u64)tmp[0] << 32) | tmp[1];
+		emulated = kvmppc_handle_store(run, vcpu, val, 8, 1);
+	} else {
+		emulated = EMULATE_DONE;
+	}
+
+	dprintk(KERN_INFO "KVM: PSQ_ST [0x%x, 0x%x] at 0x%lx (%d)\n",
+			  tmp[0], tmp[1], addr, len);
+
+	return emulated;
+}
+
+/*
+ * Cuts out inst bits with ordering according to spec.
+ * That means the leftmost bit is zero. All given bits are included.
+ */
+static inline u32 inst_get_field(u32 inst, int msb, int lsb)
+{
+	return kvmppc_get_field(inst, msb + 32, lsb + 32);
+}
+
+/*
+ * Replaces inst bits with ordering according to spec.
+ */
+static inline u32 inst_set_field(u32 inst, int msb, int lsb, int value)
+{
+	return kvmppc_set_field(inst, msb + 32, lsb + 32, value);
+}
+
+bool kvmppc_inst_is_paired_single(struct kvm_vcpu *vcpu, u32 inst)
+{
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return false;
+
+	switch (get_op(inst)) {
+	case OP_PSQ_L:
+	case OP_PSQ_LU:
+	case OP_PSQ_ST:
+	case OP_PSQ_STU:
+	case OP_LFS:
+	case OP_LFSU:
+	case OP_LFD:
+	case OP_LFDU:
+	case OP_STFS:
+	case OP_STFSU:
+	case OP_STFD:
+	case OP_STFDU:
+		return true;
+	case 4:
+		/* X form */
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_4X_PS_CMPU0:
+		case OP_4X_PSQ_LX:
+		case OP_4X_PS_CMPO0:
+		case OP_4X_PSQ_LUX:
+		case OP_4X_PS_NEG:
+		case OP_4X_PS_CMPU1:
+		case OP_4X_PS_MR:
+		case OP_4X_PS_CMPO1:
+		case OP_4X_PS_NABS:
+		case OP_4X_PS_ABS:
+		case OP_4X_PS_MERGE00:
+		case OP_4X_PS_MERGE01:
+		case OP_4X_PS_MERGE10:
+		case OP_4X_PS_MERGE11:
+			return true;
+		}
+		/* XW form */
+		switch (inst_get_field(inst, 25, 30)) {
+		case OP_4XW_PSQ_STX:
+		case OP_4XW_PSQ_STUX:
+			return true;
+		}
+		/* A form */
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_4A_PS_SUM1:
+		case OP_4A_PS_SUM0:
+		case OP_4A_PS_MULS0:
+		case OP_4A_PS_MULS1:
+		case OP_4A_PS_MADDS0:
+		case OP_4A_PS_MADDS1:
+		case OP_4A_PS_DIV:
+		case OP_4A_PS_SUB:
+		case OP_4A_PS_ADD:
+		case OP_4A_PS_SEL:
+		case OP_4A_PS_RES:
+		case OP_4A_PS_MUL:
+		case OP_4A_PS_RSQRTE:
+		case OP_4A_PS_MSUB:
+		case OP_4A_PS_MADD:
+		case OP_4A_PS_NMSUB:
+		case OP_4A_PS_NMADD:
+			return true;
+		}
+		break;
+	case 59:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_59_FADDS:
+		case OP_59_FSUBS:
+		case OP_59_FDIVS:
+		case OP_59_FRES:
+		case OP_59_FRSQRTES:
+			return true;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_59_FMULS:
+		case OP_59_FMSUBS:
+		case OP_59_FMADDS:
+		case OP_59_FNMSUBS:
+		case OP_59_FNMADDS:
+			return true;
+		}
+		break;
+	case 63:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_63_MTFSB0:
+		case OP_63_MTFSB1:
+		case OP_63_MTFSF:
+		case OP_63_MTFSFI:
+		case OP_63_MCRFS:
+		case OP_63_MFFS:
+		case OP_63_FCMPU:
+		case OP_63_FCMPO:
+		case OP_63_FNEG:
+		case OP_63_FMR:
+		case OP_63_FABS:
+		case OP_63_FRSP:
+		case OP_63_FDIV:
+		case OP_63_FADD:
+		case OP_63_FSUB:
+		case OP_63_FCTIW:
+		case OP_63_FCTIWZ:
+		case OP_63_FRSQRTE:
+		case OP_63_FCPSGN:
+			return true;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_63_FMUL:
+		case OP_63_FSEL:
+		case OP_63_FMSUB:
+		case OP_63_FMADD:
+		case OP_63_FNMSUB:
+		case OP_63_FNMADD:
+			return true;
+		}
+		break;
+	case 31:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_31_LFSX:
+		case OP_31_LFSUX:
+		case OP_31_LFDX:
+		case OP_31_LFDUX:
+		case OP_31_STFSX:
+		case OP_31_STFSUX:
+		case OP_31_STFX:
+		case OP_31_STFUX:
+		case OP_31_STFIWX:
+			return true;
+		}
+		break;
+	}
+
+	return false;
+}
+
+static int get_d_signext(u32 inst)
+{
+	int d = inst & 0x8ff;
+
+	if (d & 0x800)
+		return -(d & 0x7ff);
+
+	return (d & 0x7ff);
+}
+
+static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
+				      int reg_out, int reg_in1, int reg_in2,
+				      int reg_in3, int scalar,
+				      void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1,
+						 u32 *src2, u32 *src3))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out;
+	u32 ps0_in1, ps0_in2, ps0_in3;
+	u32 ps1_in1, ps1_in2, ps1_in3;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
+	cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
+	cvt_df((double*)&fpr[reg_in3], (float*)&ps0_in3, &t);
+
+	if (scalar & SCALAR_LOW)
+		ps0_in2 = qpr[reg_in2];
+
+	func(&t, &ps0_out, &ps0_in1, &ps0_in2, &ps0_in3);
+
+	dprintk(KERN_INFO "PS3 ps0 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
+			  ps0_in1, ps0_in2, ps0_in3, ps0_out);
+
+	if (!(scalar & SCALAR_NO_PS0))
+		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+
+	/* PS1 */
+	ps1_in1 = qpr[reg_in1];
+	ps1_in2 = qpr[reg_in2];
+	ps1_in3 = qpr[reg_in3];
+
+	if (scalar & SCALAR_HIGH)
+		ps1_in2 = ps0_in2;
+
+	if (!(scalar & SCALAR_NO_PS1))
+		func(&t, &qpr[reg_out], &ps1_in1, &ps1_in2, &ps1_in3);
+
+	dprintk(KERN_INFO "PS3 ps1 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
+			  ps1_in1, ps1_in2, ps1_in3, qpr[reg_out]);
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
+				    int reg_out, int reg_in1, int reg_in2,
+				    int scalar,
+				    void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1,
+						 u32 *src2))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out;
+	u32 ps0_in1, ps0_in2;
+	u32 ps1_out;
+	u32 ps1_in1, ps1_in2;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
+
+	if (scalar & SCALAR_LOW)
+		ps0_in2 = qpr[reg_in2];
+	else
+		cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
+
+	func(&t, &ps0_out, &ps0_in1, &ps0_in2);
+
+	if (!(scalar & SCALAR_NO_PS0)) {
+		dprintk(KERN_INFO "PS2 ps0 -> f(0x%x, 0x%x) = 0x%x\n",
+				  ps0_in1, ps0_in2, ps0_out);
+
+		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+	}
+
+	/* PS1 */
+	ps1_in1 = qpr[reg_in1];
+	ps1_in2 = qpr[reg_in2];
+
+	if (scalar & SCALAR_HIGH)
+		ps1_in2 = ps0_in2;
+
+	func(&t, &ps1_out, &ps1_in1, &ps1_in2);
+
+	if (!(scalar & SCALAR_NO_PS1)) {
+		qpr[reg_out] = ps1_out;
+
+		dprintk(KERN_INFO "PS2 ps1 -> f(0x%x, 0x%x) = 0x%x\n",
+				  ps1_in1, ps1_in2, qpr[reg_out]);
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_ps_one_in(struct kvm_vcpu *vcpu, bool rc,
+				    int reg_out, int reg_in,
+				    void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out, ps0_in;
+	u32 ps1_in;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in], (float*)&ps0_in, &t);
+	func(&t, &ps0_out, &ps0_in);
+
+	dprintk(KERN_INFO "PS1 ps0 -> f(0x%x) = 0x%x\n",
+			  ps0_in, ps0_out);
+
+	cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+
+	/* PS1 */
+	ps1_in = qpr[reg_in];
+	func(&t, &qpr[reg_out], &ps1_in);
+
+	dprintk(KERN_INFO "PS1 ps1 -> f(0x%x) = 0x%x\n",
+			  ps1_in, qpr[reg_out]);
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
+{
+	u32 inst = kvmppc_get_last_inst(vcpu);
+	enum emulation_result emulated = EMULATE_DONE;
+
+	int ax_rd = inst_get_field(inst, 6, 10);
+	int ax_ra = inst_get_field(inst, 11, 15);
+	int ax_rb = inst_get_field(inst, 16, 20);
+	int ax_rc = inst_get_field(inst, 21, 25);
+	short full_d = inst_get_field(inst, 16, 31);
+
+	u64 *fpr_d = &vcpu->arch.fpr[ax_rd];
+	u64 *fpr_a = &vcpu->arch.fpr[ax_ra];
+	u64 *fpr_b = &vcpu->arch.fpr[ax_rb];
+	u64 *fpr_c = &vcpu->arch.fpr[ax_rc];
+
+	bool rcomp = (inst & 1) ? true : false;
+	u32 cr = kvmppc_get_cr(vcpu);
+	struct thread_struct t;
+#ifdef DEBUG
+	int i;
+#endif
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	if (!kvmppc_inst_is_paired_single(vcpu, inst))
+		return EMULATE_FAIL;
+
+	if (!(vcpu->arch.msr & MSR_FP)) {
+		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL);
+		return EMULATE_AGAIN;
+	}
+
+	kvmppc_giveup_ext(vcpu, MSR_FP);
+	preempt_disable();
+	enable_kernel_fp();
+	/* Do we need to clear FE0 / FE1 here? Don't think so. */
+
+#ifdef DEBUG
+	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
+		u32 f;
+		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		dprintk(KERN_INFO "FPR[%d] = 0x%x / 0x%llx    QPR[%d] = 0x%x\n",
+			i, f, vcpu->arch.fpr[i], i, vcpu->arch.qpr[i]);
+	}
+#endif
+
+	switch (get_op(inst)) {
+	case OP_PSQ_L:
+	{
+		ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+		break;
+	}
+	case OP_PSQ_LU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_PSQ_ST:
+	{
+		ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+		break;
+	}
+	case OP_PSQ_STU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case 4:
+		/* X form */
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_4X_PS_CMPU0:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PSQ_LX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+			break;
+		}
+		case OP_4X_PS_CMPO0:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PSQ_LUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_4X_PS_NEG:
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] ^= 0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] ^= 0x80000000;
+			break;
+		case OP_4X_PS_CMPU1:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PS_MR:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		case OP_4X_PS_CMPO1:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PS_NABS:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] |= 0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] |= 0x80000000;
+			break;
+		case OP_4X_PS_ABS:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] &= ~0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] &= ~0x80000000;
+			break;
+		case OP_4X_PS_MERGE00:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra];
+			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
+			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
+			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			break;
+		case OP_4X_PS_MERGE01:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra];
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		case OP_4X_PS_MERGE10:
+			WARN_ON(rcomp);
+			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
+			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
+			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
+			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
+			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			break;
+		case OP_4X_PS_MERGE11:
+			WARN_ON(rcomp);
+			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
+			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
+			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		}
+		/* XW form */
+		switch (inst_get_field(inst, 25, 30)) {
+		case OP_4XW_PSQ_STX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+			break;
+		}
+		case OP_4XW_PSQ_STUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		}
+		/* A form */
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_4A_PS_SUM1:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_rb, ax_ra, SCALAR_NO_PS0 | SCALAR_HIGH, fps_fadds);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rc];
+			break;
+		case OP_4A_PS_SUM0:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NO_PS1 | SCALAR_LOW, fps_fadds);
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rc];
+			break;
+		case OP_4A_PS_MULS0:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_HIGH, fps_fmuls);
+			break;
+		case OP_4A_PS_MULS1:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_LOW, fps_fmuls);
+			break;
+		case OP_4A_PS_MADDS0:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_HIGH, fps_fmadds);
+			break;
+		case OP_4A_PS_MADDS1:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_LOW, fps_fmadds);
+			break;
+		case OP_4A_PS_DIV:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fdivs);
+			break;
+		case OP_4A_PS_SUB:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fsubs);
+			break;
+		case OP_4A_PS_ADD:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fadds);
+			break;
+		case OP_4A_PS_SEL:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fsel);
+			break;
+		case OP_4A_PS_RES:
+			emulated = kvmppc_ps_one_in(vcpu, rcomp, ax_rd,
+					ax_rb, fps_fres);
+			break;
+		case OP_4A_PS_MUL:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_NONE, fps_fmuls);
+			break;
+		case OP_4A_PS_RSQRTE:
+			emulated = kvmppc_ps_one_in(vcpu, rcomp, ax_rd,
+					ax_rb, fps_frsqrte);
+			break;
+		case OP_4A_PS_MSUB:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fmsubs);
+			break;
+		case OP_4A_PS_MADD:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fmadds);
+			break;
+		case OP_4A_PS_NMSUB:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fnmsubs);
+			break;
+		case OP_4A_PS_NMADD:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fnmadds);
+			break;
+		}
+		break;
+
+	/* Real FPU operations */
+
+	case OP_LFS:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_SINGLE);
+		break;
+	}
+	case OP_LFSU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_SINGLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_LFD:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_DOUBLE);
+		break;
+	}
+	case OP_LFDU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_DOUBLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_STFS:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_SINGLE);
+		break;
+	}
+	case OP_STFSU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_SINGLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_STFD:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_DOUBLE);
+		break;
+	}
+	case OP_STFDU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_DOUBLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case 31:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_31_LFSX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_SINGLE);
+			break;
+		}
+		case OP_31_LFSUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_SINGLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_LFDX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_DOUBLE);
+			break;
+		}
+		case OP_31_LFDUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_DOUBLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFSX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_SINGLE);
+			break;
+		}
+		case OP_31_STFSUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_SINGLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_DOUBLE);
+			break;
+		}
+		case OP_31_STFUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_DOUBLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFIWX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr,
+							    FPU_LS_SINGLE_LOW);
+			break;
+		}
+			break;
+		}
+		break;
+	case 59:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_59_FADDS:
+			fpd_fadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FSUBS:
+			fpd_fsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FDIVS:
+			fpd_fdivs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FRES:
+			fpd_fres(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FRSQRTES:
+			fpd_frsqrtes(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_59_FMULS:
+			fpd_fmuls(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FMSUBS:
+			fpd_fmsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FMADDS:
+			fpd_fmadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FNMSUBS:
+			fpd_fnmsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FNMADDS:
+			fpd_fnmadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		}
+		break;
+	case 63:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_63_MTFSB0:
+		case OP_63_MTFSB1:
+		case OP_63_MCRFS:
+		case OP_63_MTFSFI:
+			/* XXX need to implement */
+			break;
+		case OP_63_MFFS:
+			/* XXX missing CR */
+			*fpr_d = vcpu->arch.fpscr;
+			break;
+		case OP_63_MTFSF:
+			/* XXX missing fm bits */
+			/* XXX missing CR */
+			vcpu->arch.fpscr = *fpr_b;
+			break;
+		case OP_63_FCMPU:
+		{
+			u32 tmp_cr;
+			u32 cr0_mask = 0xf0000000;
+			u32 cr_shift = inst_get_field(inst, 6, 8) * 4;
+
+			fpd_fcmpu(&vcpu->arch.fpscr, &tmp_cr, fpr_a, fpr_b);
+			cr &= ~(cr0_mask >> cr_shift);
+			cr |= (cr & cr0_mask) >> cr_shift;
+			break;
+		}
+		case OP_63_FCMPO:
+		{
+			u32 tmp_cr;
+			u32 cr0_mask = 0xf0000000;
+			u32 cr_shift = inst_get_field(inst, 6, 8) * 4;
+
+			fpd_fcmpo(&vcpu->arch.fpscr, &tmp_cr, fpr_a, fpr_b);
+			cr &= ~(cr0_mask >> cr_shift);
+			cr |= (cr & cr0_mask) >> cr_shift;
+			break;
+		}
+		case OP_63_FNEG:
+			fpd_fneg(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FMR:
+			*fpr_d = *fpr_b;
+			break;
+		case OP_63_FABS:
+			fpd_fabs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FCPSGN:
+			fpd_fcpsgn(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FDIV:
+			fpd_fdiv(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FADD:
+			fpd_fadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FSUB:
+			fpd_fsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FCTIW:
+			fpd_fctiw(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FCTIWZ:
+			fpd_fctiwz(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FRSP:
+			fpd_frsp(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_63_FRSQRTE:
+		{
+			double one = 1.0f;
+
+			/* fD = sqrt(fB) */
+			fpd_fsqrt(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			/* fD = 1.0f / fD */
+			fpd_fdiv(&vcpu->arch.fpscr, &cr, fpr_d, (u64*)&one, fpr_d);
+			break;
+		}
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_63_FMUL:
+			fpd_fmul(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c);
+			break;
+		case OP_63_FSEL:
+			fpd_fsel(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FMSUB:
+			fpd_fmsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FMADD:
+			fpd_fmadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FNMSUB:
+			fpd_fnmsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FNMADD:
+			fpd_fnmadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		}
+		break;
+	}
+
+#ifdef DEBUG
+	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
+		u32 f;
+		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		dprintk(KERN_INFO "FPR[%d] = 0x%x\n", i, f);
+	}
+#endif
+
+	if (rcomp)
+		kvmppc_set_cr(vcpu, cr);
+
+	preempt_enable();
+
+	return emulated;
+}
diff --git a/arch/powerpc/kvm/book3s_rmhandlers.S b/arch/powerpc/kvm/book3s_rmhandlers.S
new file mode 100644
index 0000000..506d5c3
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_rmhandlers.S
@@ -0,0 +1,251 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/exception-64s.h>
+#endif
+
+/*****************************************************************************
+ *                                                                           *
+ *        Real Mode handlers that need to be in low physical memory          *
+ *                                                                           *
+ ****************************************************************************/
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define LOAD_SHADOW_VCPU(reg)				\
+	mfspr	reg, SPRN_SPRG_PACA
+
+#define SHADOW_VCPU_OFF		PACA_KVM_SVCPU
+#define MSR_NOIRQ		MSR_KERNEL & ~(MSR_IR | MSR_DR)
+#define FUNC(name) 		GLUE(.,name)
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define LOAD_SHADOW_VCPU(reg)						\
+	mfspr	reg, SPRN_SPRG_THREAD;					\
+	lwz	reg, THREAD_KVM_SVCPU(reg);				\
+	/* PPC32 can have a NULL pointer - let's check for that */	\
+	mtspr   SPRN_SPRG_SCRATCH1, r12;	/* Save r12 */		\
+	mfcr	r12;							\
+	cmpwi	reg, 0;							\
+	bne	1f;							\
+	mfspr	reg, SPRN_SPRG_SCRATCH0;				\
+	mtcr	r12;							\
+	mfspr	r12, SPRN_SPRG_SCRATCH1;				\
+	b	kvmppc_resume_\intno;					\
+1:;									\
+	mtcr	r12;							\
+	mfspr	r12, SPRN_SPRG_SCRATCH1;				\
+	tophys(reg, reg)
+
+#define SHADOW_VCPU_OFF		0
+#define MSR_NOIRQ		MSR_KERNEL
+#define FUNC(name)		name
+
+#endif
+
+.macro INTERRUPT_TRAMPOLINE intno
+
+.global kvmppc_trampoline_\intno
+kvmppc_trampoline_\intno:
+
+	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
+
+	/*
+	 * First thing to do is to find out if we're coming
+	 * from a KVM guest or a Linux process.
+	 *
+	 * To distinguish, we check a magic byte in the PACA/current
+	 */
+	LOAD_SHADOW_VCPU(r13)
+	PPC_STL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfcr	r12
+	stw	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	lbz	r12, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+	cmpwi	r12, KVM_GUEST_MODE_NONE
+	bne	..kvmppc_handler_hasmagic_\intno
+	/* No KVM guest? Then jump back to the Linux handler! */
+	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	mtcr	r12
+	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
+	b	kvmppc_resume_\intno		/* Get back original handler */
+
+	/* Now we know we're handling a KVM guest */
+..kvmppc_handler_hasmagic_\intno:
+
+	/* Should we just skip the faulting instruction? */
+	cmpwi	r12, KVM_GUEST_MODE_SKIP
+	beq	kvmppc_handler_skip_ins
+
+	/* Let's store which interrupt we're handling */
+	li	r12, \intno
+
+	/* Jump into the SLB exit code that goes to the highmem handler */
+	b	kvmppc_handler_trampoline_exit
+
+.endm
+
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSTEM_RESET
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DECREMENTER
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSCALL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_TRACE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PERFMON
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALTIVEC
+
+/* Those are only available on 64 bit machines */
+
+#ifdef CONFIG_PPC_BOOK3S_64
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_VSX
+#endif
+
+/*
+ * Bring us back to the faulting code, but skip the
+ * faulting instruction.
+ *
+ * This is a generic exit path from the interrupt
+ * trampolines above.
+ *
+ * Input Registers:
+ *
+ * R12            = free
+ * R13            = Shadow VCPU (PACA)
+ * SVCPU.SCRATCH0 = guest R12
+ * SVCPU.SCRATCH1 = guest CR
+ * SPRG_SCRATCH0  = guest R13
+ *
+ */
+kvmppc_handler_skip_ins:
+
+	/* Patch the IP to the next instruction */
+	mfsrr0	r12
+	addi	r12, r12, 4
+	mtsrr0	r12
+
+	/* Clean up all state */
+	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	mtcr	r12
+	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfspr	r13, SPRN_SPRG_SCRATCH0
+
+	/* And get back into the code */
+	RFI
+
+/*
+ * This trampoline brings us back to a real mode handler
+ *
+ * Input Registers:
+ *
+ * R5 = SRR0
+ * R6 = SRR1
+ * LR = real-mode IP
+ *
+ */
+.global kvmppc_handler_lowmem_trampoline
+kvmppc_handler_lowmem_trampoline:
+
+	mtsrr0	r5
+	mtsrr1	r6
+	blr
+kvmppc_handler_lowmem_trampoline_end:
+
+/*
+ * Call a function in real mode
+ *
+ * Input Registers:
+ *
+ * R3 = function
+ * R4 = MSR
+ * R5 = scratch register
+ *
+ */
+_GLOBAL(kvmppc_rmcall)
+	LOAD_REG_IMMEDIATE(r5, MSR_NOIRQ)
+	mtmsr	r5		/* Disable relocation and interrupts, so mtsrr
+				   doesn't get interrupted */
+	sync
+	mtsrr0	r3
+	mtsrr1	r4
+	RFI
+
+#if defined(CONFIG_PPC_BOOK3S_32)
+#define STACK_LR	INT_FRAME_SIZE+4
+#elif defined(CONFIG_PPC_BOOK3S_64)
+#define STACK_LR	_LINK
+#endif
+
+/*
+ * Activate current's external feature (FPU/Altivec/VSX)
+ */
+#define define_load_up(what) 					\
+								\
+_GLOBAL(kvmppc_load_up_ ## what);				\
+	PPC_STLU r1, -INT_FRAME_SIZE(r1);			\
+	mflr	r3;						\
+	PPC_STL	r3, STACK_LR(r1);				\
+	PPC_STL	r20, _NIP(r1);					\
+	mfmsr	r20;						\
+	LOAD_REG_IMMEDIATE(r3, MSR_DR|MSR_EE);			\
+	andc	r3,r20,r3;		/* Disable DR,EE */	\
+	mtmsr	r3;						\
+	sync;							\
+								\
+	bl	FUNC(load_up_ ## what);				\
+								\
+	mtmsr	r20;			/* Enable DR,EE */	\
+	sync;							\
+	PPC_LL	r3, STACK_LR(r1);				\
+	PPC_LL	r20, _NIP(r1);					\
+	mtlr	r3;						\
+	addi	r1, r1, INT_FRAME_SIZE;				\
+	blr
+
+define_load_up(fpu)
+#ifdef CONFIG_ALTIVEC
+define_load_up(altivec)
+#endif
+#ifdef CONFIG_VSX
+define_load_up(vsx)
+#endif
+
+.global kvmppc_trampoline_lowmem
+kvmppc_trampoline_lowmem:
+	.long kvmppc_handler_lowmem_trampoline - CONFIG_KERNEL_START
+
+.global kvmppc_trampoline_enter
+kvmppc_trampoline_enter:
+	.long kvmppc_handler_trampoline_enter - CONFIG_KERNEL_START
+
+#include "book3s_segment.S"
diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S
new file mode 100644
index 0000000..7c52ed0
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_segment.S
@@ -0,0 +1,259 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+/* Real mode helpers */
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define GET_SHADOW_VCPU(reg)    \
+	addi    reg, r13, PACA_KVM_SVCPU
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define GET_SHADOW_VCPU(reg)    			\
+	tophys(reg, r2);       			\
+	lwz     reg, (THREAD + THREAD_KVM_SVCPU)(reg);	\
+	tophys(reg, reg)
+
+#endif
+
+/* Disable for nested KVM */
+#define USE_QUICK_LAST_INST
+
+
+/* Get helper functions for subarch specific functionality */
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+#include "book3s_64_slb.S"
+#elif defined(CONFIG_PPC_BOOK3S_32)
+#include "book3s_32_sr.S"
+#endif
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_enter
+kvmppc_handler_trampoline_enter:
+
+	/* Required state:
+	 *
+	 * MSR = ~IR|DR
+	 * R13 = PACA
+	 * R1 = host R1
+	 * R2 = host R2
+	 * R10 = guest MSR
+	 * all other volatile GPRS = free
+	 * SVCPU[CR] = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR] = guest LR
+	 */
+
+	/* r3 = shadow vcpu */
+	GET_SHADOW_VCPU(r3)
+
+	/* Move SRR0 and SRR1 into the respective regs */
+	PPC_LL  r9, SVCPU_PC(r3)
+	mtsrr0	r9
+	mtsrr1	r10
+
+	/* Activate guest mode, so faults get handled by KVM */
+	li	r11, KVM_GUEST_MODE_GUEST
+	stb	r11, SVCPU_IN_GUEST(r3)
+
+	/* Switch to guest segment. This is subarch specific. */
+	LOAD_GUEST_SEGMENTS
+
+	/* Enter guest */
+
+	PPC_LL	r4, (SVCPU_CTR)(r3)
+	PPC_LL	r5, (SVCPU_LR)(r3)
+	lwz	r6, (SVCPU_CR)(r3)
+	lwz	r7, (SVCPU_XER)(r3)
+
+	mtctr	r4
+	mtlr	r5
+	mtcr	r6
+	mtxer	r7
+
+	PPC_LL	r0, (SVCPU_R0)(r3)
+	PPC_LL	r1, (SVCPU_R1)(r3)
+	PPC_LL	r2, (SVCPU_R2)(r3)
+	PPC_LL	r4, (SVCPU_R4)(r3)
+	PPC_LL	r5, (SVCPU_R5)(r3)
+	PPC_LL	r6, (SVCPU_R6)(r3)
+	PPC_LL	r7, (SVCPU_R7)(r3)
+	PPC_LL	r8, (SVCPU_R8)(r3)
+	PPC_LL	r9, (SVCPU_R9)(r3)
+	PPC_LL	r10, (SVCPU_R10)(r3)
+	PPC_LL	r11, (SVCPU_R11)(r3)
+	PPC_LL	r12, (SVCPU_R12)(r3)
+	PPC_LL	r13, (SVCPU_R13)(r3)
+
+	PPC_LL	r3, (SVCPU_R3)(r3)
+
+	RFI
+kvmppc_handler_trampoline_enter_end:
+
+
+
+/******************************************************************************
+ *                                                                            *
+ *                               Exit code                                    *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_exit
+kvmppc_handler_trampoline_exit:
+
+	/* Register usage at this point:
+	 *
+	 * SPRG_SCRATCH0  = guest R13
+	 * R12            = exit handler id
+	 * R13            = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.SCRATCH0 = guest R12
+	 * SVCPU.SCRATCH1 = guest CR
+	 *
+	 */
+
+	/* Save registers */
+
+	PPC_STL	r0, (SHADOW_VCPU_OFF + SVCPU_R0)(r13)
+	PPC_STL	r1, (SHADOW_VCPU_OFF + SVCPU_R1)(r13)
+	PPC_STL	r2, (SHADOW_VCPU_OFF + SVCPU_R2)(r13)
+	PPC_STL	r3, (SHADOW_VCPU_OFF + SVCPU_R3)(r13)
+	PPC_STL	r4, (SHADOW_VCPU_OFF + SVCPU_R4)(r13)
+	PPC_STL	r5, (SHADOW_VCPU_OFF + SVCPU_R5)(r13)
+	PPC_STL	r6, (SHADOW_VCPU_OFF + SVCPU_R6)(r13)
+	PPC_STL	r7, (SHADOW_VCPU_OFF + SVCPU_R7)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_R8)(r13)
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_R9)(r13)
+	PPC_STL	r10, (SHADOW_VCPU_OFF + SVCPU_R10)(r13)
+	PPC_STL	r11, (SHADOW_VCPU_OFF + SVCPU_R11)(r13)
+
+	/* Restore R1/R2 so we can handle faults */
+	PPC_LL	r1, (SHADOW_VCPU_OFF + SVCPU_HOST_R1)(r13)
+	PPC_LL	r2, (SHADOW_VCPU_OFF + SVCPU_HOST_R2)(r13)
+
+	/* Save guest PC and MSR */
+	mfsrr0	r3
+	mfsrr1	r4
+
+	PPC_STL	r3, (SHADOW_VCPU_OFF + SVCPU_PC)(r13)
+	PPC_STL	r4, (SHADOW_VCPU_OFF + SVCPU_SHADOW_SRR1)(r13)
+
+	/* Get scratch'ed off registers */
+	mfspr	r9, SPRN_SPRG_SCRATCH0
+	PPC_LL	r8, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	lwz	r7, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_R13)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_R12)(r13)
+	stw	r7, (SHADOW_VCPU_OFF + SVCPU_CR)(r13)
+
+	/* Save more register state  */
+
+	mfxer	r5
+	mfdar	r6
+	mfdsisr	r7
+	mfctr	r8
+	mflr	r9
+
+	stw	r5, (SHADOW_VCPU_OFF + SVCPU_XER)(r13)
+	PPC_STL	r6, (SHADOW_VCPU_OFF + SVCPU_FAULT_DAR)(r13)
+	stw	r7, (SHADOW_VCPU_OFF + SVCPU_FAULT_DSISR)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_CTR)(r13)
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_LR)(r13)
+
+	/*
+	 * In order for us to easily get the last instruction,
+	 * we got the #vmexit at, we exploit the fact that the
+	 * virtual layout is still the same here, so we can just
+	 * ld from the guest's PC address
+	 */
+
+	/* We only load the last instruction when it's safe */
+	cmpwi	r12, BOOK3S_INTERRUPT_DATA_STORAGE
+	beq	ld_last_inst
+	cmpwi	r12, BOOK3S_INTERRUPT_PROGRAM
+	beq	ld_last_inst
+	cmpwi	r12, BOOK3S_INTERRUPT_ALIGNMENT
+	beq-	ld_last_inst
+
+	b	no_ld_last_inst
+
+ld_last_inst:
+	/* Save off the guest instruction we're at */
+
+	/* In case lwz faults */
+	li	r0, KVM_INST_FETCH_FAILED
+
+#ifdef USE_QUICK_LAST_INST
+
+	/* Set guest mode to 'jump over instruction' so if lwz faults
+	 * we'll just continue at the next IP. */
+	li	r9, KVM_GUEST_MODE_SKIP
+	stb	r9, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+
+	/*    1) enable paging for data */
+	mfmsr	r9
+	ori	r11, r9, MSR_DR			/* Enable paging for data */
+	mtmsr	r11
+	sync
+	/*    2) fetch the instruction */
+	lwz	r0, 0(r3)
+	/*    3) disable paging again */
+	mtmsr	r9
+	sync
+
+#endif
+	stw	r0, (SHADOW_VCPU_OFF + SVCPU_LAST_INST)(r13)
+
+no_ld_last_inst:
+
+	/* Unset guest mode */
+	li	r9, KVM_GUEST_MODE_NONE
+	stb	r9, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+
+	/* Switch back to host MMU */
+	LOAD_HOST_SEGMENTS
+
+	/* Register usage at this point:
+	 *
+	 * R1       = host R1
+	 * R2       = host R2
+	 * R12      = exit handler id
+	 * R13      = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.*  = guest *
+	 *
+	 */
+
+	/* RFI into the highmem handler */
+	mfmsr	r7
+	ori	r7, r7, MSR_IR|MSR_DR|MSR_RI|MSR_ME	/* Enable paging */
+	mtsrr1	r7
+	/* Load highmem handler address */
+	PPC_LL	r8, (SHADOW_VCPU_OFF + SVCPU_VMHANDLER)(r13)
+	mtsrr0	r8
+
+	RFI
+kvmppc_handler_trampoline_exit_end:
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 06f5a9e..a33ab8c 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
+#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
@@ -69,10 +70,10 @@ void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu)
 
 	for (i = 0; i < 32; i += 4) {
 		printk("gpr%02d: %08lx %08lx %08lx %08lx\n", i,
-		       vcpu->arch.gpr[i],
-		       vcpu->arch.gpr[i+1],
-		       vcpu->arch.gpr[i+2],
-		       vcpu->arch.gpr[i+3]);
+		       kvmppc_get_gpr(vcpu, i),
+		       kvmppc_get_gpr(vcpu, i+1),
+		       kvmppc_get_gpr(vcpu, i+2),
+		       kvmppc_get_gpr(vcpu, i+3));
 	}
 }
 
@@ -82,8 +83,32 @@ static void kvmppc_booke_queue_irqprio(struct kvm_vcpu *vcpu,
 	set_bit(priority, &vcpu->arch.pending_exceptions);
 }
 
-void kvmppc_core_queue_program(struct kvm_vcpu *vcpu)
+static void kvmppc_core_queue_dtlb_miss(struct kvm_vcpu *vcpu,
+                                        ulong dear_flags, ulong esr_flags)
 {
+	vcpu->arch.queued_dear = dear_flags;
+	vcpu->arch.queued_esr = esr_flags;
+	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DTLB_MISS);
+}
+
+static void kvmppc_core_queue_data_storage(struct kvm_vcpu *vcpu,
+                                           ulong dear_flags, ulong esr_flags)
+{
+	vcpu->arch.queued_dear = dear_flags;
+	vcpu->arch.queued_esr = esr_flags;
+	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DATA_STORAGE);
+}
+
+static void kvmppc_core_queue_inst_storage(struct kvm_vcpu *vcpu,
+                                           ulong esr_flags)
+{
+	vcpu->arch.queued_esr = esr_flags;
+	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_INST_STORAGE);
+}
+
+void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong esr_flags)
+{
+	vcpu->arch.queued_esr = esr_flags;
 	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_PROGRAM);
 }
 
@@ -97,26 +122,42 @@ int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
 	return test_bit(BOOKE_IRQPRIO_DECREMENTER, &vcpu->arch.pending_exceptions);
 }
 
+void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu)
+{
+	clear_bit(BOOKE_IRQPRIO_DECREMENTER, &vcpu->arch.pending_exceptions);
+}
+
 void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                 struct kvm_interrupt *irq)
 {
 	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	clear_bit(BOOKE_IRQPRIO_EXTERNAL, &vcpu->arch.pending_exceptions);
+}
+
 /* Deliver the interrupt of the corresponding priority, if possible. */
 static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
                                         unsigned int priority)
 {
 	int allowed = 0;
 	ulong msr_mask;
+	bool update_esr = false, update_dear = false;
 
 	switch (priority) {
-	case BOOKE_IRQPRIO_PROGRAM:
 	case BOOKE_IRQPRIO_DTLB_MISS:
-	case BOOKE_IRQPRIO_ITLB_MISS:
-	case BOOKE_IRQPRIO_SYSCALL:
 	case BOOKE_IRQPRIO_DATA_STORAGE:
+		update_dear = true;
+		/* fall through */
 	case BOOKE_IRQPRIO_INST_STORAGE:
+	case BOOKE_IRQPRIO_PROGRAM:
+		update_esr = true;
+		/* fall through */
+	case BOOKE_IRQPRIO_ITLB_MISS:
+	case BOOKE_IRQPRIO_SYSCALL:
 	case BOOKE_IRQPRIO_FP_UNAVAIL:
 	case BOOKE_IRQPRIO_SPE_UNAVAIL:
 	case BOOKE_IRQPRIO_SPE_FP_DATA:
@@ -151,6 +192,10 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
 		vcpu->arch.srr0 = vcpu->arch.pc;
 		vcpu->arch.srr1 = vcpu->arch.msr;
 		vcpu->arch.pc = vcpu->arch.ivpr | vcpu->arch.ivor[priority];
+		if (update_esr == true)
+			vcpu->arch.esr = vcpu->arch.queued_esr;
+		if (update_dear == true)
+			vcpu->arch.dear = vcpu->arch.queued_dear;
 		kvmppc_set_msr(vcpu, vcpu->arch.msr & msr_mask);
 
 		clear_bit(priority, &vcpu->arch.pending_exceptions);
@@ -223,8 +268,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		if (vcpu->arch.msr & MSR_PR) {
 			/* Program traps generated by user-level software must be handled
 			 * by the guest kernel. */
-			vcpu->arch.esr = vcpu->arch.fault_esr;
-			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_PROGRAM);
+			kvmppc_core_queue_program(vcpu, vcpu->arch.fault_esr);
 			r = RESUME_GUEST;
 			kvmppc_account_exit(vcpu, USR_PR_INST);
 			break;
@@ -280,16 +324,14 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		break;
 
 	case BOOKE_INTERRUPT_DATA_STORAGE:
-		vcpu->arch.dear = vcpu->arch.fault_dear;
-		vcpu->arch.esr = vcpu->arch.fault_esr;
-		kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DATA_STORAGE);
+		kvmppc_core_queue_data_storage(vcpu, vcpu->arch.fault_dear,
+		                               vcpu->arch.fault_esr);
 		kvmppc_account_exit(vcpu, DSI_EXITS);
 		r = RESUME_GUEST;
 		break;
 
 	case BOOKE_INTERRUPT_INST_STORAGE:
-		vcpu->arch.esr = vcpu->arch.fault_esr;
-		kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_INST_STORAGE);
+		kvmppc_core_queue_inst_storage(vcpu, vcpu->arch.fault_esr);
 		kvmppc_account_exit(vcpu, ISI_EXITS);
 		r = RESUME_GUEST;
 		break;
@@ -310,9 +352,9 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		gtlb_index = kvmppc_mmu_dtlb_index(vcpu, eaddr);
 		if (gtlb_index < 0) {
 			/* The guest didn't have a mapping for it. */
-			kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_DTLB_MISS);
-			vcpu->arch.dear = vcpu->arch.fault_dear;
-			vcpu->arch.esr = vcpu->arch.fault_esr;
+			kvmppc_core_queue_dtlb_miss(vcpu,
+			                            vcpu->arch.fault_dear,
+			                            vcpu->arch.fault_esr);
 			kvmppc_mmu_dtlb_miss(vcpu);
 			kvmppc_account_exit(vcpu, DTLB_REAL_MISS_EXITS);
 			r = RESUME_GUEST;
@@ -426,7 +468,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.pc = 0;
 	vcpu->arch.msr = 0;
-	vcpu->arch.gpr[1] = (16<<20) - 8; /* -8 for the callee-save LR slot */
+	kvmppc_set_gpr(vcpu, 1, (16<<20) - 8); /* -8 for the callee-save LR slot */
 
 	vcpu->arch.shadow_pid = 1;
 
@@ -443,11 +485,13 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	regs->pc = vcpu->arch.pc;
-	regs->cr = vcpu->arch.cr;
+	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = vcpu->arch.ctr;
 	regs->lr = vcpu->arch.lr;
-	regs->xer = vcpu->arch.xer;
+	regs->xer = kvmppc_get_xer(vcpu);
 	regs->msr = vcpu->arch.msr;
 	regs->srr0 = vcpu->arch.srr0;
 	regs->srr1 = vcpu->arch.srr1;
@@ -461,7 +505,9 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	regs->sprg7 = vcpu->arch.sprg6;
 
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
-		regs->gpr[i] = vcpu->arch.gpr[i];
+		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
+
+	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -470,11 +516,13 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	vcpu->arch.pc = regs->pc;
-	vcpu->arch.cr = regs->cr;
+	kvmppc_set_cr(vcpu, regs->cr);
 	vcpu->arch.ctr = regs->ctr;
 	vcpu->arch.lr = regs->lr;
-	vcpu->arch.xer = regs->xer;
+	kvmppc_set_xer(vcpu, regs->xer);
 	kvmppc_set_msr(vcpu, regs->msr);
 	vcpu->arch.srr0 = regs->srr0;
 	vcpu->arch.srr1 = regs->srr1;
@@ -486,8 +534,10 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	vcpu->arch.sprg6 = regs->sprg5;
 	vcpu->arch.sprg7 = regs->sprg6;
 
-	for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++)
-		vcpu->arch.gpr[i] = regs->gpr[i];
+	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
+		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
+
+	vcpu_put(vcpu);
 
 	return 0;
 }
@@ -517,7 +567,12 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
                                   struct kvm_translation *tr)
 {
-	return kvmppc_core_vcpu_translate(vcpu, tr);
+	int r;
+
+	vcpu_load(vcpu);
+	r = kvmppc_core_vcpu_translate(vcpu, tr);
+	vcpu_put(vcpu);
+	return r;
 }
 
 int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
diff --git a/arch/powerpc/kvm/booke_emulate.c b/arch/powerpc/kvm/booke_emulate.c
index aebc65e..cbc790e 100644
--- a/arch/powerpc/kvm/booke_emulate.c
+++ b/arch/powerpc/kvm/booke_emulate.c
@@ -62,20 +62,20 @@ int kvmppc_booke_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 		case OP_31_XOP_MFMSR:
 			rt = get_rt(inst);
-			vcpu->arch.gpr[rt] = vcpu->arch.msr;
+			kvmppc_set_gpr(vcpu, rt, vcpu->arch.msr);
 			kvmppc_set_exit_type(vcpu, EMULATED_MFMSR_EXITS);
 			break;
 
 		case OP_31_XOP_MTMSR:
 			rs = get_rs(inst);
 			kvmppc_set_exit_type(vcpu, EMULATED_MTMSR_EXITS);
-			kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
+			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, rs));
 			break;
 
 		case OP_31_XOP_WRTEE:
 			rs = get_rs(inst);
 			vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
-							 | (vcpu->arch.gpr[rs] & MSR_EE);
+					| (kvmppc_get_gpr(vcpu, rs) & MSR_EE);
 			kvmppc_set_exit_type(vcpu, EMULATED_WRTEE_EXITS);
 			break;
 
@@ -101,22 +101,23 @@ int kvmppc_booke_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
 int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 {
 	int emulated = EMULATE_DONE;
+	ulong spr_val = kvmppc_get_gpr(vcpu, rs);
 
 	switch (sprn) {
 	case SPRN_DEAR:
-		vcpu->arch.dear = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.dear = spr_val; break;
 	case SPRN_ESR:
-		vcpu->arch.esr = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.esr = spr_val; break;
 	case SPRN_DBCR0:
-		vcpu->arch.dbcr0 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.dbcr0 = spr_val; break;
 	case SPRN_DBCR1:
-		vcpu->arch.dbcr1 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.dbcr1 = spr_val; break;
 	case SPRN_DBSR:
-		vcpu->arch.dbsr &= ~vcpu->arch.gpr[rs]; break;
+		vcpu->arch.dbsr &= ~spr_val; break;
 	case SPRN_TSR:
-		vcpu->arch.tsr &= ~vcpu->arch.gpr[rs]; break;
+		vcpu->arch.tsr &= ~spr_val; break;
 	case SPRN_TCR:
-		vcpu->arch.tcr = vcpu->arch.gpr[rs];
+		vcpu->arch.tcr = spr_val;
 		kvmppc_emulate_dec(vcpu);
 		break;
 
@@ -124,64 +125,64 @@ int kvmppc_booke_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 	 * loaded into the real SPRGs when resuming the
 	 * guest. */
 	case SPRN_SPRG4:
-		vcpu->arch.sprg4 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.sprg4 = spr_val; break;
 	case SPRN_SPRG5:
-		vcpu->arch.sprg5 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.sprg5 = spr_val; break;
 	case SPRN_SPRG6:
-		vcpu->arch.sprg6 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.sprg6 = spr_val; break;
 	case SPRN_SPRG7:
-		vcpu->arch.sprg7 = vcpu->arch.gpr[rs]; break;
+		vcpu->arch.sprg7 = spr_val; break;
 
 	case SPRN_IVPR:
-		vcpu->arch.ivpr = vcpu->arch.gpr[rs];
+		vcpu->arch.ivpr = spr_val;
 		break;
 	case SPRN_IVOR0:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL] = spr_val;
 		break;
 	case SPRN_IVOR1:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK] = spr_val;
 		break;
 	case SPRN_IVOR2:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE] = spr_val;
 		break;
 	case SPRN_IVOR3:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE] = spr_val;
 		break;
 	case SPRN_IVOR4:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL] = spr_val;
 		break;
 	case SPRN_IVOR5:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT] = spr_val;
 		break;
 	case SPRN_IVOR6:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM] = spr_val;
 		break;
 	case SPRN_IVOR7:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL] = spr_val;
 		break;
 	case SPRN_IVOR8:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL] = spr_val;
 		break;
 	case SPRN_IVOR9:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL] = spr_val;
 		break;
 	case SPRN_IVOR10:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER] = spr_val;
 		break;
 	case SPRN_IVOR11:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_FIT] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_FIT] = spr_val;
 		break;
 	case SPRN_IVOR12:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG] = spr_val;
 		break;
 	case SPRN_IVOR13:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS] = spr_val;
 		break;
 	case SPRN_IVOR14:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS] = spr_val;
 		break;
 	case SPRN_IVOR15:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG] = spr_val;
 		break;
 
 	default:
@@ -197,65 +198,65 @@ int kvmppc_booke_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 
 	switch (sprn) {
 	case SPRN_IVPR:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivpr; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivpr); break;
 	case SPRN_DEAR:
-		vcpu->arch.gpr[rt] = vcpu->arch.dear; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dear); break;
 	case SPRN_ESR:
-		vcpu->arch.gpr[rt] = vcpu->arch.esr; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.esr); break;
 	case SPRN_DBCR0:
-		vcpu->arch.gpr[rt] = vcpu->arch.dbcr0; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbcr0); break;
 	case SPRN_DBCR1:
-		vcpu->arch.gpr[rt] = vcpu->arch.dbcr1; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbcr1); break;
 	case SPRN_DBSR:
-		vcpu->arch.gpr[rt] = vcpu->arch.dbsr; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dbsr); break;
 
 	case SPRN_IVOR0:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_CRITICAL]);
 		break;
 	case SPRN_IVOR1:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_MACHINE_CHECK]);
 		break;
 	case SPRN_IVOR2:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DATA_STORAGE]);
 		break;
 	case SPRN_IVOR3:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_INST_STORAGE]);
 		break;
 	case SPRN_IVOR4:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_EXTERNAL]);
 		break;
 	case SPRN_IVOR5:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_ALIGNMENT]);
 		break;
 	case SPRN_IVOR6:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_PROGRAM]);
 		break;
 	case SPRN_IVOR7:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_FP_UNAVAIL]);
 		break;
 	case SPRN_IVOR8:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_SYSCALL]);
 		break;
 	case SPRN_IVOR9:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_AP_UNAVAIL]);
 		break;
 	case SPRN_IVOR10:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DECREMENTER]);
 		break;
 	case SPRN_IVOR11:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_FIT];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_FIT]);
 		break;
 	case SPRN_IVOR12:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_WATCHDOG]);
 		break;
 	case SPRN_IVOR13:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DTLB_MISS]);
 		break;
 	case SPRN_IVOR14:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_ITLB_MISS]);
 		break;
 	case SPRN_IVOR15:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_DEBUG]);
 		break;
 
 	default:
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 64949ee..e8a00b0 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kvm_host.h>
+#include <linux/slab.h>
 #include <linux/err.h>
 
 #include <asm/reg.h>
@@ -60,6 +61,12 @@ int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu)
 
 	kvmppc_e500_tlb_setup(vcpu_e500);
 
+	/* Registers init */
+	vcpu->arch.pvr = mfspr(SPRN_PVR);
+
+	/* Since booke kvm only support one core, update all vcpus' PIR to 0 */
+	vcpu->vcpu_id = 0;
+
 	return 0;
 }
 
@@ -154,10 +161,10 @@ static int __init kvmppc_e500_init(void)
 	flush_icache_range(kvmppc_booke_handlers,
 			kvmppc_booke_handlers + max_ivor + kvmppc_handler_len);
 
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), 0, THIS_MODULE);
 }
 
-static void __init kvmppc_e500_exit(void)
+static void __exit kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index be95b8d..8e3edfb 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -74,54 +74,59 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
 {
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 	int emulated = EMULATE_DONE;
+	ulong spr_val = kvmppc_get_gpr(vcpu, rs);
 
 	switch (sprn) {
 	case SPRN_PID:
 		vcpu_e500->pid[0] = vcpu->arch.shadow_pid =
-			vcpu->arch.pid = vcpu->arch.gpr[rs];
+			vcpu->arch.pid = spr_val;
 		break;
 	case SPRN_PID1:
-		vcpu_e500->pid[1] = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->pid[1] = spr_val; break;
 	case SPRN_PID2:
-		vcpu_e500->pid[2] = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->pid[2] = spr_val; break;
 	case SPRN_MAS0:
-		vcpu_e500->mas0 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas0 = spr_val; break;
 	case SPRN_MAS1:
-		vcpu_e500->mas1 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas1 = spr_val; break;
 	case SPRN_MAS2:
-		vcpu_e500->mas2 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas2 = spr_val; break;
 	case SPRN_MAS3:
-		vcpu_e500->mas3 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas3 = spr_val; break;
 	case SPRN_MAS4:
-		vcpu_e500->mas4 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas4 = spr_val; break;
 	case SPRN_MAS6:
-		vcpu_e500->mas6 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas6 = spr_val; break;
 	case SPRN_MAS7:
-		vcpu_e500->mas7 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->mas7 = spr_val; break;
+	case SPRN_L1CSR0:
+		vcpu_e500->l1csr0 = spr_val;
+		vcpu_e500->l1csr0 &= ~(L1CSR0_DCFI | L1CSR0_CLFC);
+		break;
 	case SPRN_L1CSR1:
-		vcpu_e500->l1csr1 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->l1csr1 = spr_val; break;
 	case SPRN_HID0:
-		vcpu_e500->hid0 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->hid0 = spr_val; break;
 	case SPRN_HID1:
-		vcpu_e500->hid1 = vcpu->arch.gpr[rs]; break;
+		vcpu_e500->hid1 = spr_val; break;
 
 	case SPRN_MMUCSR0:
 		emulated = kvmppc_e500_emul_mt_mmucsr0(vcpu_e500,
-				vcpu->arch.gpr[rs]);
+				spr_val);
 		break;
 
 	/* extra exceptions */
 	case SPRN_IVOR32:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL] = spr_val;
 		break;
 	case SPRN_IVOR33:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA] = spr_val;
 		break;
 	case SPRN_IVOR34:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND] = spr_val;
 		break;
 	case SPRN_IVOR35:
-		vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR] = vcpu->arch.gpr[rs];
+		vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR] = spr_val;
 		break;
 
 	default:
@@ -138,63 +143,57 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 
 	switch (sprn) {
 	case SPRN_PID:
-		vcpu->arch.gpr[rt] = vcpu_e500->pid[0]; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->pid[0]); break;
 	case SPRN_PID1:
-		vcpu->arch.gpr[rt] = vcpu_e500->pid[1]; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->pid[1]); break;
 	case SPRN_PID2:
-		vcpu->arch.gpr[rt] = vcpu_e500->pid[2]; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->pid[2]); break;
 	case SPRN_MAS0:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas0; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas0); break;
 	case SPRN_MAS1:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas1; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas1); break;
 	case SPRN_MAS2:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas2; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas2); break;
 	case SPRN_MAS3:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas3; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas3); break;
 	case SPRN_MAS4:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas4; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas4); break;
 	case SPRN_MAS6:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas6; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas6); break;
 	case SPRN_MAS7:
-		vcpu->arch.gpr[rt] = vcpu_e500->mas7; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas7); break;
 
 	case SPRN_TLB0CFG:
-		vcpu->arch.gpr[rt] = mfspr(SPRN_TLB0CFG);
-		vcpu->arch.gpr[rt] &= ~0xfffUL;
-		vcpu->arch.gpr[rt] |= vcpu_e500->guest_tlb_size[0];
-		break;
-
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->tlb0cfg); break;
 	case SPRN_TLB1CFG:
-		vcpu->arch.gpr[rt] = mfspr(SPRN_TLB1CFG);
-		vcpu->arch.gpr[rt] &= ~0xfffUL;
-		vcpu->arch.gpr[rt] |= vcpu_e500->guest_tlb_size[1];
-		break;
-
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->tlb1cfg); break;
+	case SPRN_L1CSR0:
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->l1csr0); break;
 	case SPRN_L1CSR1:
-		vcpu->arch.gpr[rt] = vcpu_e500->l1csr1; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->l1csr1); break;
 	case SPRN_HID0:
-		vcpu->arch.gpr[rt] = vcpu_e500->hid0; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->hid0); break;
 	case SPRN_HID1:
-		vcpu->arch.gpr[rt] = vcpu_e500->hid1; break;
+		kvmppc_set_gpr(vcpu, rt, vcpu_e500->hid1); break;
 
 	case SPRN_MMUCSR0:
-		vcpu->arch.gpr[rt] = 0; break;
+		kvmppc_set_gpr(vcpu, rt, 0); break;
 
 	case SPRN_MMUCFG:
-		vcpu->arch.gpr[rt] = mfspr(SPRN_MMUCFG); break;
+		kvmppc_set_gpr(vcpu, rt, mfspr(SPRN_MMUCFG)); break;
 
 	/* extra exceptions */
 	case SPRN_IVOR32:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL]);
 		break;
 	case SPRN_IVOR33:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_DATA]);
 		break;
 	case SPRN_IVOR34:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_FP_ROUND]);
 		break;
 	case SPRN_IVOR35:
-		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR];
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.ivor[BOOKE_IRQPRIO_PERFORMANCE_MONITOR]);
 		break;
 	default:
 		emulated = kvmppc_booke_emulate_mfspr(vcpu, sprn, rt);
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index fb1e1dc..21011e1 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
@@ -417,7 +418,7 @@ int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb)
 	int esel, tlbsel;
 	gva_t ea;
 
-	ea = ((ra) ? vcpu->arch.gpr[ra] : 0) + vcpu->arch.gpr[rb];
+	ea = ((ra) ? kvmppc_get_gpr(vcpu, ra) : 0) + kvmppc_get_gpr(vcpu, rb);
 
 	ia = (ea >> 2) & 0x1;
 
@@ -470,7 +471,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb)
 	struct tlbe *gtlbe = NULL;
 	gva_t ea;
 
-	ea = vcpu->arch.gpr[rb];
+	ea = kvmppc_get_gpr(vcpu, rb);
 
 	for (tlbsel = 0; tlbsel < 2; tlbsel++) {
 		esel = kvmppc_e500_tlb_index(vcpu_e500, ea, tlbsel, pid, as);
@@ -728,6 +729,12 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500)
 	if (vcpu_e500->shadow_pages[1] == NULL)
 		goto err_out_page0;
 
+	/* Init TLB configuration register */
+	vcpu_e500->tlb0cfg = mfspr(SPRN_TLB0CFG) & ~0xfffUL;
+	vcpu_e500->tlb0cfg |= vcpu_e500->guest_tlb_size[0];
+	vcpu_e500->tlb1cfg = mfspr(SPRN_TLB1CFG) & ~0xfffUL;
+	vcpu_e500->tlb1cfg |= vcpu_e500->guest_tlb_size[1];
+
 	return 0;
 
 err_out_page0:
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 4a9ac66..4568ec3 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -38,10 +38,12 @@
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
 #define OP_31_XOP_STBUX     247
 #define OP_31_XOP_LHZX      279
 #define OP_31_XOP_LHZUX     311
 #define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
 #define OP_31_XOP_STHX      407
 #define OP_31_XOP_STHUX     439
 #define OP_31_XOP_MTSPR     467
@@ -62,10 +64,12 @@
 #define OP_STBU 39
 #define OP_LHZ  40
 #define OP_LHZU 41
+#define OP_LHA  42
+#define OP_LHAU 43
 #define OP_STH  44
 #define OP_STHU 45
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
 {
 	return 1;
@@ -82,7 +86,10 @@ void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
 	unsigned long dec_nsec;
 
 	pr_debug("mtDEC: %x\n", vcpu->arch.dec);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
+	/* mtdec lowers the interrupt line when positive. */
+	kvmppc_core_dequeue_dec(vcpu);
+
 	/* POWER4+ triggers a dec interrupt if the value is < 0 */
 	if (vcpu->arch.dec & 0x80000000) {
 		hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
@@ -125,7 +132,7 @@ void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
  * from opcode tables in the future. */
 int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 {
-	u32 inst = vcpu->arch.last_inst;
+	u32 inst = kvmppc_get_last_inst(vcpu);
 	u32 ea;
 	int ra;
 	int rb;
@@ -142,12 +149,12 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 
 	switch (get_op(inst)) {
 	case OP_TRAP:
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	case OP_TRAP_64:
+		kvmppc_core_queue_program(vcpu, SRR1_PROGTRAP);
 #else
-		vcpu->arch.esr |= ESR_PTR;
+		kvmppc_core_queue_program(vcpu, vcpu->arch.esr | ESR_PTR);
 #endif
-		kvmppc_core_queue_program(vcpu);
 		advance = 0;
 		break;
 
@@ -164,17 +171,30 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 			break;
 
+		case OP_31_XOP_LBZUX:
+			rt = get_rt(inst);
+			ra = get_ra(inst);
+			rb = get_rb(inst);
+
+			ea = kvmppc_get_gpr(vcpu, rb);
+			if (ra)
+				ea += kvmppc_get_gpr(vcpu, ra);
+
+			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
+			kvmppc_set_gpr(vcpu, ra, ea);
+			break;
+
 		case OP_31_XOP_STWX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               4, 1);
 			break;
 
 		case OP_31_XOP_STBX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               1, 1);
 			break;
 
@@ -183,14 +203,19 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			ra = get_ra(inst);
 			rb = get_rb(inst);
 
-			ea = vcpu->arch.gpr[rb];
+			ea = kvmppc_get_gpr(vcpu, rb);
 			if (ra)
-				ea += vcpu->arch.gpr[ra];
+				ea += kvmppc_get_gpr(vcpu, ra);
 
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               1, 1);
-			vcpu->arch.gpr[rs] = ea;
+			kvmppc_set_gpr(vcpu, rs, ea);
+			break;
+
+		case OP_31_XOP_LHAX:
+			rt = get_rt(inst);
+			emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
 			break;
 
 		case OP_31_XOP_LHZX:
@@ -203,12 +228,12 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			ra = get_ra(inst);
 			rb = get_rb(inst);
 
-			ea = vcpu->arch.gpr[rb];
+			ea = kvmppc_get_gpr(vcpu, rb);
 			if (ra)
-				ea += vcpu->arch.gpr[ra];
+				ea += kvmppc_get_gpr(vcpu, ra);
 
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
-			vcpu->arch.gpr[ra] = ea;
+			kvmppc_set_gpr(vcpu, ra, ea);
 			break;
 
 		case OP_31_XOP_MFSPR:
@@ -217,47 +242,49 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 
 			switch (sprn) {
 			case SPRN_SRR0:
-				vcpu->arch.gpr[rt] = vcpu->arch.srr0; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.srr0); break;
 			case SPRN_SRR1:
-				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.srr1); break;
 			case SPRN_PVR:
-				vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.pvr); break;
 			case SPRN_PIR:
-				vcpu->arch.gpr[rt] = vcpu->vcpu_id; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->vcpu_id); break;
 			case SPRN_MSSSR0:
-				vcpu->arch.gpr[rt] = 0; break;
+				kvmppc_set_gpr(vcpu, rt, 0); break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
 			 * In fact, we probably will never see these traps. */
 			case SPRN_TBWL:
-				vcpu->arch.gpr[rt] = get_tb() >> 32; break;
+				kvmppc_set_gpr(vcpu, rt, get_tb() >> 32); break;
 			case SPRN_TBWU:
-				vcpu->arch.gpr[rt] = get_tb(); break;
+				kvmppc_set_gpr(vcpu, rt, get_tb()); break;
 
 			case SPRN_SPRG0:
-				vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.sprg0); break;
 			case SPRN_SPRG1:
-				vcpu->arch.gpr[rt] = vcpu->arch.sprg1; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.sprg1); break;
 			case SPRN_SPRG2:
-				vcpu->arch.gpr[rt] = vcpu->arch.sprg2; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.sprg2); break;
 			case SPRN_SPRG3:
-				vcpu->arch.gpr[rt] = vcpu->arch.sprg3; break;
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.sprg3); break;
 			/* Note: SPRG4-7 are user-readable, so we don't get
 			 * a trap. */
 
 			case SPRN_DEC:
 			{
 				u64 jd = get_tb() - vcpu->arch.dec_jiffies;
-				vcpu->arch.gpr[rt] = vcpu->arch.dec - jd;
-				pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, vcpu->arch.gpr[rt]);
+				kvmppc_set_gpr(vcpu, rt, vcpu->arch.dec - jd);
+				pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n",
+					 vcpu->arch.dec, jd,
+					 kvmppc_get_gpr(vcpu, rt));
 				break;
 			}
 			default:
 				emulated = kvmppc_core_emulate_mfspr(vcpu, sprn, rt);
 				if (emulated == EMULATE_FAIL) {
 					printk("mfspr: unknown spr %x\n", sprn);
-					vcpu->arch.gpr[rt] = 0;
+					kvmppc_set_gpr(vcpu, rt, 0);
 				}
 				break;
 			}
@@ -269,7 +296,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			rb = get_rb(inst);
 
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               2, 1);
 			break;
 
@@ -278,14 +305,14 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			ra = get_ra(inst);
 			rb = get_rb(inst);
 
-			ea = vcpu->arch.gpr[rb];
+			ea = kvmppc_get_gpr(vcpu, rb);
 			if (ra)
-				ea += vcpu->arch.gpr[ra];
+				ea += kvmppc_get_gpr(vcpu, ra);
 
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               2, 1);
-			vcpu->arch.gpr[ra] = ea;
+			kvmppc_set_gpr(vcpu, ra, ea);
 			break;
 
 		case OP_31_XOP_MTSPR:
@@ -293,9 +320,9 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			rs = get_rs(inst);
 			switch (sprn) {
 			case SPRN_SRR0:
-				vcpu->arch.srr0 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.srr0 = kvmppc_get_gpr(vcpu, rs); break;
 			case SPRN_SRR1:
-				vcpu->arch.srr1 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.srr1 = kvmppc_get_gpr(vcpu, rs); break;
 
 			/* XXX We need to context-switch the timebase for
 			 * watchdog and FIT. */
@@ -305,18 +332,18 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_MSSSR0: break;
 
 			case SPRN_DEC:
-				vcpu->arch.dec = vcpu->arch.gpr[rs];
+				vcpu->arch.dec = kvmppc_get_gpr(vcpu, rs);
 				kvmppc_emulate_dec(vcpu);
 				break;
 
 			case SPRN_SPRG0:
-				vcpu->arch.sprg0 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.sprg0 = kvmppc_get_gpr(vcpu, rs); break;
 			case SPRN_SPRG1:
-				vcpu->arch.sprg1 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.sprg1 = kvmppc_get_gpr(vcpu, rs); break;
 			case SPRN_SPRG2:
-				vcpu->arch.sprg2 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.sprg2 = kvmppc_get_gpr(vcpu, rs); break;
 			case SPRN_SPRG3:
-				vcpu->arch.sprg3 = vcpu->arch.gpr[rs]; break;
+				vcpu->arch.sprg3 = kvmppc_get_gpr(vcpu, rs); break;
 
 			default:
 				emulated = kvmppc_core_emulate_mtspr(vcpu, sprn, rs);
@@ -348,7 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			rb = get_rb(inst);
 
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               4, 0);
 			break;
 
@@ -363,7 +390,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			rb = get_rb(inst);
 
 			emulated = kvmppc_handle_store(run, vcpu,
-			                               vcpu->arch.gpr[rs],
+						       kvmppc_get_gpr(vcpu, rs),
 			                               2, 0);
 			break;
 
@@ -382,7 +409,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	case OP_LBZ:
@@ -394,35 +421,39 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	case OP_STW:
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               4, 1);
 		break;
 
 	case OP_STWU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               4, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	case OP_STB:
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               1, 1);
 		break;
 
 	case OP_STBU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               1, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	case OP_LHZ:
@@ -434,21 +465,35 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ra = get_ra(inst);
 		rt = get_rt(inst);
 		emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
+		break;
+
+	case OP_LHA:
+		rt = get_rt(inst);
+		emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+		break;
+
+	case OP_LHAU:
+		ra = get_ra(inst);
+		rt = get_rt(inst);
+		emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	case OP_STH:
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               2, 1);
 		break;
 
 	case OP_STHU:
 		ra = get_ra(inst);
 		rs = get_rs(inst);
-		emulated = kvmppc_handle_store(run, vcpu, vcpu->arch.gpr[rs],
+		emulated = kvmppc_handle_store(run, vcpu,
+					       kvmppc_get_gpr(vcpu, rs),
 		                               2, 1);
-		vcpu->arch.gpr[ra] = vcpu->arch.paddr_accessed;
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
 	default:
@@ -457,17 +502,21 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 
 	if (emulated == EMULATE_FAIL) {
 		emulated = kvmppc_core_emulate_op(run, vcpu, inst, &advance);
-		if (emulated == EMULATE_FAIL) {
+		if (emulated == EMULATE_AGAIN) {
+			advance = 0;
+		} else if (emulated == EMULATE_FAIL) {
 			advance = 0;
 			printk(KERN_ERR "Couldn't emulate instruction 0x%08x "
 			       "(op %d xop %d)\n", inst, get_op(inst), get_xop(inst));
+			kvmppc_core_queue_program(vcpu, 0);
 		}
 	}
 
-	trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated);
+	trace_kvm_ppc_instr(inst, kvmppc_get_pc(vcpu), emulated);
 
+	/* Advance past emulated instruction. */
 	if (advance)
-		vcpu->arch.pc += 4; /* Advance past emulated instruction. */
+		kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4);
 
 	return emulated;
 }
diff --git a/arch/powerpc/kvm/fpu.S b/arch/powerpc/kvm/fpu.S
new file mode 100644
index 0000000..2b340a3
--- /dev/null
+++ b/arch/powerpc/kvm/fpu.S
@@ -0,0 +1,273 @@
+/*
+ *  FPU helper code to use FPU operations from inside the kernel
+ *
+ *    Copyright (C) 2010 Alexander Graf (agraf@suse.de)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* Instructions operating on single parameters */
+
+/*
+ * Single operation with one input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ */
+#define FPS_ONE_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+									\
+	name	0,0;							\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);	/* save new fpscr value */	\
+	blr
+
+/*
+ * Single operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ * R6 = (short*)&param2
+ */
+#define FPS_TWO_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+	lfs	1,0(r6);						\
+									\
+	name	0,0,1;							\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	blr
+
+/*
+ * Single operation with three input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ * R6 = (short*)&param2
+ * R7 = (short*)&param3
+ */
+#define FPS_THREE_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+	lfs	1,0(r6);						\
+	lfs	2,0(r7);						\
+									\
+	name	0,0,1,2;						\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	blr
+
+FPS_ONE_IN(fres)
+FPS_ONE_IN(frsqrte)
+FPS_ONE_IN(fsqrts)
+FPS_TWO_IN(fadds)
+FPS_TWO_IN(fdivs)
+FPS_TWO_IN(fmuls)
+FPS_TWO_IN(fsubs)
+FPS_THREE_IN(fmadds)
+FPS_THREE_IN(fmsubs)
+FPS_THREE_IN(fnmadds)
+FPS_THREE_IN(fnmsubs)
+FPS_THREE_IN(fsel)
+
+
+/* Instructions operating on double parameters */
+
+/*
+ * Beginning of double instruction processing
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2 [load_two]
+ * R8 = (double*)&param3 [load_three]
+ * LR = instruction call function
+ */
+fpd_load_three:
+	lfd	2,0(r8)			/* load param3 */
+fpd_load_two:
+	lfd	1,0(r7)			/* load param2 */
+fpd_load_one:
+	lfd	0,0(r6)			/* load param1 */
+fpd_load_none:
+	lfd	3,0(r3)			/* load up fpscr value */
+	MTFSF_L(3)
+	lwz	r6, 0(r4)		/* load cr */
+	mtcr	r6
+	blr
+
+/*
+ * End of double instruction processing
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * LR = caller of instruction call function
+ */
+fpd_return:
+	mfcr	r6
+	stfd	0,0(r5)			/* save result */
+	mffs	0
+	stfd	0,0(r3)			/* save new fpscr value */
+	stw	r6,0(r4)		/* save new cr value */
+	blr
+
+/*
+ * Double operation with no input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ */
+#define FPD_NONE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_none;						\
+	mtlr	r12;							\
+									\
+	name.	0;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * Double operation with one input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ */
+#define FPD_ONE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_one;						\
+	mtlr	r12;							\
+									\
+	name.	0,0;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * Double operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2
+ * R8 = (double*)&param3
+ */
+#define FPD_TWO_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_two;						\
+	mtlr	r12;							\
+									\
+	name.	0,0,1;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * CR Double operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&param1
+ * R6 = (double*)&param2
+ * R7 = (double*)&param3
+ */
+#define FPD_TWO_IN_CR(name)						\
+_GLOBAL(fpd_ ## name);							\
+	lfd	1,0(r6);		/* load param2 */		\
+	lfd	0,0(r5);		/* load param1 */		\
+	lfd	3,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(3);							\
+	lwz	r6, 0(r4);		/* load cr */			\
+	mtcr	r6;							\
+									\
+	name	0,0,1;			/* call instruction */		\
+	mfcr	r6;							\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	stw	r6,0(r4);		/* save new cr value */		\
+	blr
+
+/*
+ * Double operation with three input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2
+ * R8 = (double*)&param3
+ */
+#define FPD_THREE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_three;						\
+	mtlr	r12;							\
+									\
+	name.	0,0,1,2;		/* call instruction */		\
+	b	fpd_return
+
+FPD_ONE_IN(fsqrts)
+FPD_ONE_IN(frsqrtes)
+FPD_ONE_IN(fres)
+FPD_ONE_IN(frsp)
+FPD_ONE_IN(fctiw)
+FPD_ONE_IN(fctiwz)
+FPD_ONE_IN(fsqrt)
+FPD_ONE_IN(fre)
+FPD_ONE_IN(frsqrte)
+FPD_ONE_IN(fneg)
+FPD_ONE_IN(fabs)
+FPD_TWO_IN(fadds)
+FPD_TWO_IN(fsubs)
+FPD_TWO_IN(fdivs)
+FPD_TWO_IN(fmuls)
+FPD_TWO_IN_CR(fcmpu)
+FPD_TWO_IN(fcpsgn)
+FPD_TWO_IN(fdiv)
+FPD_TWO_IN(fadd)
+FPD_TWO_IN(fmul)
+FPD_TWO_IN_CR(fcmpo)
+FPD_TWO_IN(fsub)
+FPD_THREE_IN(fmsubs)
+FPD_THREE_IN(fmadds)
+FPD_THREE_IN(fnmsubs)
+FPD_THREE_IN(fnmadds)
+FPD_THREE_IN(fsel)
+FPD_THREE_IN(fmsub)
+FPD_THREE_IN(fmadd)
+FPD_THREE_IN(fnmsub)
+FPD_THREE_IN(fnmadd)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index f06cf93..9b8683f 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -25,6 +25,7 @@
 #include <linux/vmalloc.h>
 #include <linux/hrtimer.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 #include <asm/cputable.h>
 #include <asm/uaccess.h>
 #include <asm/kvm_ppc.h>
@@ -69,7 +70,7 @@ int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	case EMULATE_FAIL:
 		/* XXX Deliver Program interrupt to guest. */
 		printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
-		       vcpu->arch.last_inst);
+		       kvmppc_get_last_inst(vcpu));
 		r = RESUME_HOST;
 		break;
 	default:
@@ -137,6 +138,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvmppc_free_vcpus(kvm);
 	kvm_free_physmem(kvm);
+	cleanup_srcu_struct(&kvm->srcu);
 	kfree(kvm);
 }
 
@@ -146,6 +148,10 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 	switch (ext) {
 	case KVM_CAP_PPC_SEGSTATE:
+	case KVM_CAP_PPC_PAIRED_SINGLES:
+	case KVM_CAP_PPC_UNSET_IRQ:
+	case KVM_CAP_ENABLE_CAP:
+	case KVM_CAP_PPC_OSI:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -165,14 +171,24 @@ long kvm_arch_dev_ioctl(struct file *filp,
 	return -EINVAL;
 }
 
-int kvm_arch_set_memory_region(struct kvm *kvm,
-                               struct kvm_userspace_memory_region *mem,
-                               struct kvm_memory_slot old,
-                               int user_alloc)
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+                                   struct kvm_memory_slot *memslot,
+                                   struct kvm_memory_slot old,
+                                   struct kvm_userspace_memory_region *mem,
+                                   int user_alloc)
 {
 	return 0;
 }
 
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+               struct kvm_userspace_memory_region *mem,
+               struct kvm_memory_slot old,
+               int user_alloc)
+{
+       return;
+}
+
+
 void kvm_arch_flush_shadow(struct kvm *kvm)
 {
 }
@@ -181,12 +197,17 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 {
 	struct kvm_vcpu *vcpu;
 	vcpu = kvmppc_core_vcpu_create(kvm, id);
-	kvmppc_create_vcpu_debugfs(vcpu, id);
+	if (!IS_ERR(vcpu))
+		kvmppc_create_vcpu_debugfs(vcpu, id);
 	return vcpu;
 }
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 {
+	/* Make sure we're not using the vcpu anymore */
+	hrtimer_cancel(&vcpu->arch.dec_timer);
+	tasklet_kill(&vcpu->arch.tasklet);
+
 	kvmppc_remove_vcpu_debugfs(vcpu);
 	kvmppc_core_vcpu_free(vcpu);
 }
@@ -260,34 +281,72 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu,
                                      struct kvm_run *run)
 {
-	ulong *gpr = &vcpu->arch.gpr[vcpu->arch.io_gpr];
-	*gpr = run->dcr.data;
+	kvmppc_set_gpr(vcpu, vcpu->arch.io_gpr, run->dcr.data);
 }
 
 static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu,
                                       struct kvm_run *run)
 {
-	ulong *gpr = &vcpu->arch.gpr[vcpu->arch.io_gpr];
+	u64 gpr;
 
-	if (run->mmio.len > sizeof(*gpr)) {
+	if (run->mmio.len > sizeof(gpr)) {
 		printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len);
 		return;
 	}
 
 	if (vcpu->arch.mmio_is_bigendian) {
 		switch (run->mmio.len) {
-		case 4: *gpr = *(u32 *)run->mmio.data; break;
-		case 2: *gpr = *(u16 *)run->mmio.data; break;
-		case 1: *gpr = *(u8 *)run->mmio.data; break;
+		case 8: gpr = *(u64 *)run->mmio.data; break;
+		case 4: gpr = *(u32 *)run->mmio.data; break;
+		case 2: gpr = *(u16 *)run->mmio.data; break;
+		case 1: gpr = *(u8 *)run->mmio.data; break;
 		}
 	} else {
 		/* Convert BE data from userland back to LE. */
 		switch (run->mmio.len) {
-		case 4: *gpr = ld_le32((u32 *)run->mmio.data); break;
-		case 2: *gpr = ld_le16((u16 *)run->mmio.data); break;
-		case 1: *gpr = *(u8 *)run->mmio.data; break;
+		case 4: gpr = ld_le32((u32 *)run->mmio.data); break;
+		case 2: gpr = ld_le16((u16 *)run->mmio.data); break;
+		case 1: gpr = *(u8 *)run->mmio.data; break;
 		}
 	}
+
+	if (vcpu->arch.mmio_sign_extend) {
+		switch (run->mmio.len) {
+#ifdef CONFIG_PPC64
+		case 4:
+			gpr = (s64)(s32)gpr;
+			break;
+#endif
+		case 2:
+			gpr = (s64)(s16)gpr;
+			break;
+		case 1:
+			gpr = (s64)(s8)gpr;
+			break;
+		}
+	}
+
+	kvmppc_set_gpr(vcpu, vcpu->arch.io_gpr, gpr);
+
+	switch (vcpu->arch.io_gpr & KVM_REG_EXT_MASK) {
+	case KVM_REG_GPR:
+		kvmppc_set_gpr(vcpu, vcpu->arch.io_gpr, gpr);
+		break;
+	case KVM_REG_FPR:
+		vcpu->arch.fpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+#ifdef CONFIG_PPC_BOOK3S
+	case KVM_REG_QPR:
+		vcpu->arch.qpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+	case KVM_REG_FQPR:
+		vcpu->arch.fpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		vcpu->arch.qpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+#endif
+	default:
+		BUG();
+	}
 }
 
 int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
@@ -306,12 +365,25 @@ int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	vcpu->arch.mmio_is_bigendian = is_bigendian;
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_is_write = 0;
+	vcpu->arch.mmio_sign_extend = 0;
 
 	return EMULATE_DO_MMIO;
 }
 
+/* Same as above, but sign extends */
+int kvmppc_handle_loads(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                        unsigned int rt, unsigned int bytes, int is_bigendian)
+{
+	int r;
+
+	r = kvmppc_handle_load(run, vcpu, rt, bytes, is_bigendian);
+	vcpu->arch.mmio_sign_extend = 1;
+
+	return r;
+}
+
 int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                        u32 val, unsigned int bytes, int is_bigendian)
+                        u64 val, unsigned int bytes, int is_bigendian)
 {
 	void *data = run->mmio.data;
 
@@ -329,6 +401,7 @@ int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	/* Store the value at the lowest bytes in 'data'. */
 	if (is_bigendian) {
 		switch (bytes) {
+		case 8: *(u64 *)data = val; break;
 		case 4: *(u32 *)data = val; break;
 		case 2: *(u16 *)data = val; break;
 		case 1: *(u8  *)data = val; break;
@@ -363,6 +436,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (!vcpu->arch.dcr_is_write)
 			kvmppc_complete_dcr_load(vcpu, run);
 		vcpu->arch.dcr_needed = 0;
+	} else if (vcpu->arch.osi_needed) {
+		u64 *gprs = run->osi.gprs;
+		int i;
+
+		for (i = 0; i < 32; i++)
+			kvmppc_set_gpr(vcpu, i, gprs[i]);
+		vcpu->arch.osi_needed = 0;
 	}
 
 	kvmppc_core_deliver_interrupts(vcpu);
@@ -383,7 +463,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 {
-	kvmppc_core_queue_external(vcpu, irq);
+	if (irq->irq == KVM_INTERRUPT_UNSET)
+		kvmppc_core_dequeue_external(vcpu, irq);
+	else
+		kvmppc_core_queue_external(vcpu, irq);
 
 	if (waitqueue_active(&vcpu->wq)) {
 		wake_up_interruptible(&vcpu->wq);
@@ -393,6 +476,27 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
+				     struct kvm_enable_cap *cap)
+{
+	int r;
+
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	case KVM_CAP_PPC_OSI:
+		r = 0;
+		vcpu->arch.osi_enabled = true;
+		break;
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
                                     struct kvm_mp_state *mp_state)
 {
@@ -421,6 +525,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
 		break;
 	}
+	case KVM_ENABLE_CAP:
+	{
+		struct kvm_enable_cap cap;
+		r = -EFAULT;
+		if (copy_from_user(&cap, argp, sizeof(cap)))
+			goto out;
+		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 3040dac..111da1c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -12,8 +12,8 @@ CFLAGS_REMOVE_code-patching.o = -pg
 CFLAGS_REMOVE_feature-fixups.o = -pg
 
 obj-y			:= string.o alloc.o \
-			   checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
+			   checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index e68beac..4d4eeb9 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -43,62 +43,62 @@ END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	ld	r7,16(r4)
 	ldu	r8,24(r4)
 1:	std	r5,8(r3)
-	ld	r9,8(r4)
 	std	r6,16(r3)
+	ld	r9,8(r4)
 	ld	r10,16(r4)
 	std	r7,24(r3)
-	ld	r11,24(r4)
 	std	r8,32(r3)
+	ld	r11,24(r4)
 	ld	r12,32(r4)
 	std	r9,40(r3)
-	ld	r5,40(r4)
 	std	r10,48(r3)
+	ld	r5,40(r4)
 	ld	r6,48(r4)
 	std	r11,56(r3)
-	ld	r7,56(r4)
 	std	r12,64(r3)
+	ld	r7,56(r4)
 	ld	r8,64(r4)
 	std	r5,72(r3)
-	ld	r9,72(r4)
 	std	r6,80(r3)
+	ld	r9,72(r4)
 	ld	r10,80(r4)
 	std	r7,88(r3)
-	ld	r11,88(r4)
 	std	r8,96(r3)
+	ld	r11,88(r4)
 	ld	r12,96(r4)
 	std	r9,104(r3)
-	ld	r5,104(r4)
 	std	r10,112(r3)
+	ld	r5,104(r4)
 	ld	r6,112(r4)
 	std	r11,120(r3)
-	ld	r7,120(r4)
 	stdu	r12,128(r3)
+	ld	r7,120(r4)
 	ldu	r8,128(r4)
 	bdnz	1b
 
 	std	r5,8(r3)
-	ld	r9,8(r4)
 	std	r6,16(r3)
+	ld	r9,8(r4)
 	ld	r10,16(r4)
 	std	r7,24(r3)
-	ld	r11,24(r4)
 	std	r8,32(r3)
+	ld	r11,24(r4)
 	ld	r12,32(r4)
 	std	r9,40(r3)
-	ld	r5,40(r4)
 	std	r10,48(r3)
+	ld	r5,40(r4)
 	ld	r6,48(r4)
 	std	r11,56(r3)
-	ld	r7,56(r4)
 	std	r12,64(r3)
+	ld	r7,56(r4)
 	ld	r8,64(r4)
 	std	r5,72(r3)
-	ld	r9,72(r4)
 	std	r6,80(r3)
+	ld	r9,72(r4)
 	ld	r10,80(r4)
 	std	r7,88(r3)
-	ld	r11,88(r4)
 	std	r8,96(r3)
+	ld	r11,88(r4)
 	ld	r12,96(r4)
 	std	r9,104(r3)
 	std	r10,112(r3)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 693b14a..578b625 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -44,37 +44,55 @@ BEGIN_FTR_SECTION
 	andi.	r0,r4,7
 	bne	.Lsrc_unaligned
 END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
-	srdi	r7,r5,4
-20:	ld	r9,0(r4)
-	addi	r4,r4,-8
-	mtctr	r7
-	andi.	r5,r5,7
-	bf	cr7*4+0,22f
-	addi	r3,r3,8
-	addi	r4,r4,8
-	mr	r8,r9
-	blt	cr1,72f
-21:	ld	r9,8(r4)
-70:	std	r8,8(r3)
-22:	ldu	r8,16(r4)
-71:	stdu	r9,16(r3)
+	blt	cr1,.Ldo_tail		/* if < 16 bytes to copy */
+	srdi	r0,r5,5
+	cmpdi	cr1,r0,0
+20:	ld	r7,0(r4)
+220:	ld	r6,8(r4)
+	addi	r4,r4,16
+	mtctr	r0
+	andi.	r0,r5,0x10
+	beq	22f
+	addi	r3,r3,16
+	addi	r4,r4,-16
+	mr	r9,r7
+	mr	r8,r6
+	beq	cr1,72f
+21:	ld	r7,16(r4)
+221:	ld	r6,24(r4)
+	addi	r4,r4,32
+70:	std	r9,0(r3)
+270:	std	r8,8(r3)
+22:	ld	r9,0(r4)
+222:	ld	r8,8(r4)
+71:	std	r7,16(r3)
+271:	std	r6,24(r3)
+	addi	r3,r3,32
 	bdnz	21b
-72:	std	r8,8(r3)
+72:	std	r9,0(r3)
+272:	std	r8,8(r3)
+	andi.	r5,r5,0xf
 	beq+	3f
-	addi	r3,r3,16
+	addi	r4,r4,16
 .Ldo_tail:
-	bf	cr7*4+1,1f
-23:	lwz	r9,8(r4)
+	addi	r3,r3,16
+	bf	cr7*4+0,246f
+244:	ld	r9,0(r4)
+	addi	r4,r4,8
+245:	std	r9,0(r3)
+	addi	r3,r3,8
+246:	bf	cr7*4+1,1f
+23:	lwz	r9,0(r4)
 	addi	r4,r4,4
 73:	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-44:	lhz	r9,8(r4)
+44:	lhz	r9,0(r4)
 	addi	r4,r4,2
 74:	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-45:	lbz	r9,8(r4)
+45:	lbz	r9,0(r4)
 75:	stb	r9,0(r3)
 3:	li	r3,0
 	blr
@@ -220,7 +238,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 131:
 	addi	r3,r3,8
 120:
+320:
 122:
+322:
 124:
 125:
 126:
@@ -229,9 +249,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 129:
 133:
 	addi	r3,r3,8
-121:
 132:
 	addi	r3,r3,8
+121:
+321:
+344:
 134:
 135:
 138:
@@ -303,18 +325,22 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 183:
 	add	r3,r3,r7
 	b	1f
+371:
 180:
 	addi	r3,r3,8
 171:
 177:
 	addi	r3,r3,8
-170:
-172:
+370:
+372:
 176:
 178:
 	addi	r3,r3,4
 185:
 	addi	r3,r3,4
+170:
+172:
+345:
 173:
 174:
 175:
@@ -341,11 +367,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
 	.section __ex_table,"a"
 	.align	3
 	.llong	20b,120b
+	.llong	220b,320b
 	.llong	21b,121b
+	.llong	221b,321b
 	.llong	70b,170b
+	.llong	270b,370b
 	.llong	22b,122b
+	.llong	222b,322b
 	.llong	71b,171b
+	.llong	271b,371b
 	.llong	72b,172b
+	.llong	272b,372b
+	.llong	244b,344b
+	.llong	245b,345b
 	.llong	23b,123b
 	.llong	73b,173b
 	.llong	44b,144b
diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S
index 70a9cd8..1c893f0 100644
--- a/arch/powerpc/lib/crtsavres.S
+++ b/arch/powerpc/lib/crtsavres.S
@@ -6,6 +6,7 @@
  *   Written By Michael Meissner
  *
  * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ * 64 bit additions from reading the PPC elf64abi document.
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -44,6 +45,8 @@
 
 #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
+#ifndef CONFIG_PPC64
+
 /* Routines for saving integer registers, called by the compiler.  */
 /* Called with r11 pointing to the stack header word of the caller of the */
 /* function, just beyond the end of the integer save area.  */
@@ -226,4 +229,130 @@ _GLOBAL(_rest32gpr_31_x)
 	mtlr	0
 	mr	1,11
 	blr
+
+#else /* CONFIG_PPC64 */
+
+.globl	_savegpr0_14
+_savegpr0_14:
+	std	r14,-144(r1)
+.globl	_savegpr0_15
+_savegpr0_15:
+	std	r15,-136(r1)
+.globl	_savegpr0_16
+_savegpr0_16:
+	std	r16,-128(r1)
+.globl	_savegpr0_17
+_savegpr0_17:
+	std	r17,-120(r1)
+.globl	_savegpr0_18
+_savegpr0_18:
+	std	r18,-112(r1)
+.globl	_savegpr0_19
+_savegpr0_19:
+	std	r19,-104(r1)
+.globl	_savegpr0_20
+_savegpr0_20:
+	std	r20,-96(r1)
+.globl	_savegpr0_21
+_savegpr0_21:
+	std	r21,-88(r1)
+.globl	_savegpr0_22
+_savegpr0_22:
+	std	r22,-80(r1)
+.globl	_savegpr0_23
+_savegpr0_23:
+	std	r23,-72(r1)
+.globl	_savegpr0_24
+_savegpr0_24:
+	std	r24,-64(r1)
+.globl	_savegpr0_25
+_savegpr0_25:
+	std	r25,-56(r1)
+.globl	_savegpr0_26
+_savegpr0_26:
+	std	r26,-48(r1)
+.globl	_savegpr0_27
+_savegpr0_27:
+	std	r27,-40(r1)
+.globl	_savegpr0_28
+_savegpr0_28:
+	std	r28,-32(r1)
+.globl	_savegpr0_29
+_savegpr0_29:
+	std	r29,-24(r1)
+.globl	_savegpr0_30
+_savegpr0_30:
+	std	r30,-16(r1)
+.globl	_savegpr0_31
+_savegpr0_31:
+	std	r31,-8(r1)
+	std	r0,16(r1)
+	blr
+
+.globl	_restgpr0_14
+_restgpr0_14:
+	ld	r14,-144(r1)
+.globl	_restgpr0_15
+_restgpr0_15:
+	ld	r15,-136(r1)
+.globl	_restgpr0_16
+_restgpr0_16:
+	ld	r16,-128(r1)
+.globl	_restgpr0_17
+_restgpr0_17:
+	ld	r17,-120(r1)
+.globl	_restgpr0_18
+_restgpr0_18:
+	ld	r18,-112(r1)
+.globl	_restgpr0_19
+_restgpr0_19:
+	ld	r19,-104(r1)
+.globl	_restgpr0_20
+_restgpr0_20:
+	ld	r20,-96(r1)
+.globl	_restgpr0_21
+_restgpr0_21:
+	ld	r21,-88(r1)
+.globl	_restgpr0_22
+_restgpr0_22:
+	ld	r22,-80(r1)
+.globl	_restgpr0_23
+_restgpr0_23:
+	ld	r23,-72(r1)
+.globl	_restgpr0_24
+_restgpr0_24:
+	ld	r24,-64(r1)
+.globl	_restgpr0_25
+_restgpr0_25:
+	ld	r25,-56(r1)
+.globl	_restgpr0_26
+_restgpr0_26:
+	ld	r26,-48(r1)
+.globl	_restgpr0_27
+_restgpr0_27:
+	ld	r27,-40(r1)
+.globl	_restgpr0_28
+_restgpr0_28:
+	ld	r28,-32(r1)
+.globl	_restgpr0_29
+_restgpr0_29:
+	ld	r0,16(r1)
+	ld	r29,-24(r1)
+	mtlr	r0
+	ld	r30,-16(r1)
+	ld	r31,-8(r1)
+	blr
+
+.globl	_restgpr0_30
+_restgpr0_30:
+	ld	r30,-16(r1)
+.globl	_restgpr0_31
+_restgpr0_31:
+	ld	r0,16(r1)
+	ld	r31,-8(r1)
+	mtlr	r0
+	blr
+
+#endif /* CONFIG_PPC64 */
+
 #endif
diff --git a/arch/powerpc/lib/devres.c b/arch/powerpc/lib/devres.c
index 292115d..deac4d3 100644
--- a/arch/powerpc/lib/devres.c
+++ b/arch/powerpc/lib/devres.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>	/* devres_*(), devm_ioremap_release() */
+#include <linux/gfp.h>
 #include <linux/io.h>		/* ioremap_flags() */
 #include <linux/module.h>	/* EXPORT_SYMBOL() */
 
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
index 7e8865b..0d08d01 100644
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -12,6 +12,7 @@
  *  2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -112,7 +113,8 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 
 void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
-	unsigned int *start, *end, *dest;
+	long *start, *end;
+	unsigned int *dest;
 
 	if (!(value & CPU_FTR_LWSYNC))
 		return ;
@@ -287,8 +289,8 @@ static void test_alternative_case_with_external_branch(void)
 
 static void test_cpu_macros(void)
 {
-	extern void ftr_fixup_test_FTR_macros;
-	extern void ftr_fixup_test_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FTR_macros;
+	extern u8 ftr_fixup_test_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
 			     &ftr_fixup_test_FTR_macros;
 
@@ -300,8 +302,8 @@ static void test_cpu_macros(void)
 static void test_fw_macros(void)
 {
 #ifdef CONFIG_PPC64
-	extern void ftr_fixup_test_FW_FTR_macros;
-	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FW_FTR_macros;
+	extern u8 ftr_fixup_test_FW_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
 			     &ftr_fixup_test_FW_FTR_macros;
 
@@ -313,10 +315,10 @@ static void test_fw_macros(void)
 
 static void test_lwsync_macros(void)
 {
-	extern void lwsync_fixup_test;
-	extern void end_lwsync_fixup_test;
-	extern void lwsync_fixup_test_expected_LWSYNC;
-	extern void lwsync_fixup_test_expected_SYNC;
+	extern u8 lwsync_fixup_test;
+	extern u8 end_lwsync_fixup_test;
+	extern u8 lwsync_fixup_test_expected_LWSYNC;
+	extern u8 lwsync_fixup_test_expected_SYNC;
 	unsigned long size = &end_lwsync_fixup_test -
 			     &lwsync_fixup_test;
 
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 64e2e49..455881a 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -28,7 +28,7 @@ _GLOBAL(strcpy)
 /* This clears out any unused part of the destination buffer,
    just as the libc version does.  -- paulus */
 _GLOBAL(strncpy)
-	cmpwi	0,r5,0
+	PPC_LCMPI 0,r5,0
 	beqlr
 	mtctr	r5
 	addi	r6,r3,-1
@@ -39,7 +39,7 @@ _GLOBAL(strncpy)
 	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
 	bnelr			/* if we didn't hit a null char, we're done */
 	mfctr	r5
-	cmpwi	0,r5,0		/* any space left in destination buffer? */
+	PPC_LCMPI 0,r5,0	/* any space left in destination buffer? */
 	beqlr			/* we know r0 == 0 here */
 2:	stbu	r0,1(r6)	/* clear it out if so */
 	bdnz	2b
@@ -70,8 +70,8 @@ _GLOBAL(strcmp)
 	blr
 
 _GLOBAL(strncmp)
-	PPC_LCMPI r5,0
-	beqlr
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r5,r3,-1
 	addi	r4,r4,-1
@@ -82,6 +82,8 @@ _GLOBAL(strncmp)
 	beqlr	1
 	bdnzt	eq,1b
 	blr
+2:	li	r3,0
+	blr
 
 _GLOBAL(strlen)
 	addi	r4,r3,-1
@@ -92,8 +94,8 @@ _GLOBAL(strlen)
 	blr
 
 _GLOBAL(memcmp)
-	cmpwi	0,r5,0
-	ble-	2f
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r6,r3,-1
 	addi	r4,r4,-1
@@ -106,8 +108,8 @@ _GLOBAL(memcmp)
 	blr
 
 _GLOBAL(memchr)
-	cmpwi	0,r5,0
-	ble-	2f
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r3,r3,-1
 1:	lbzu	r0,1(r3)
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 08dfa8e..1dc2fa5 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -84,8 +84,8 @@ void __init MMU_init_hw(void)
 	 * vectors and the kernel live in real-mode.
 	 */
 
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
+        mtspr(SPRN_DCCR, 0xFFFF0000);	/* 2GByte of data space at 0x0. */
+        mtspr(SPRN_ICCR, 0xFFFF0000);	/* 2GByte of instr. space at 0x0. */
 }
 
 #define LARGE_PAGE_SIZE_16M	(1<<24)
@@ -135,7 +135,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 16 and 4 MiB
 	 * pages. Consequently, restrict the top end of RAM currently
-	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 3986264..d8c6efb 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -38,7 +38,9 @@ unsigned int tlb_44x_index; /* = 0 */
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
-static void __init ppc44x_update_tlb_hwater(void)
+unsigned long tlb_47x_boltmap[1024/8];
+
+static void __cpuinit ppc44x_update_tlb_hwater(void)
 {
 	extern unsigned int tlb_44x_patch_hwater_D[];
 	extern unsigned int tlb_44x_patch_hwater_I[];
@@ -59,7 +61,7 @@ static void __init ppc44x_update_tlb_hwater(void)
 }
 
 /*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 44x type MMU
  */
 static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
@@ -67,12 +69,18 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 
 	ppc44x_update_tlb_hwater();
 
+	mtspr(SPRN_MMUCR, 0);
+
 	__asm__ __volatile__(
 		"tlbwe	%2,%3,%4\n"
 		"tlbwe	%1,%3,%5\n"
 		"tlbwe	%0,%3,%6\n"
 	:
+#ifdef CONFIG_PPC47x
+	: "r" (PPC47x_TLB2_S_RWX),
+#else
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+#endif
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
 	  "r" (entry),
@@ -81,8 +89,93 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 	  "i" (PPC44x_TLB_ATTRIB));
 }
 
+static int __init ppc47x_find_free_bolted(void)
+{
+	unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+	unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+	if (!(mmube0 & MMUBE0_VBE0))
+		return 0;
+	if (!(mmube0 & MMUBE0_VBE1))
+		return 1;
+	if (!(mmube0 & MMUBE0_VBE2))
+		return 2;
+	if (!(mmube1 & MMUBE1_VBE3))
+		return 3;
+	if (!(mmube1 & MMUBE1_VBE4))
+		return 4;
+	if (!(mmube1 & MMUBE1_VBE5))
+		return 5;
+	return -1;
+}
+
+static void __init ppc47x_update_boltmap(void)
+{
+	unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+	unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+	if (mmube0 & MMUBE0_VBE0)
+		__set_bit((mmube0 >> MMUBE0_IBE0_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube0 & MMUBE0_VBE1)
+		__set_bit((mmube0 >> MMUBE0_IBE1_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube0 & MMUBE0_VBE2)
+		__set_bit((mmube0 >> MMUBE0_IBE2_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE3)
+		__set_bit((mmube1 >> MMUBE1_IBE3_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE4)
+		__set_bit((mmube1 >> MMUBE1_IBE4_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE5)
+		__set_bit((mmube1 >> MMUBE1_IBE5_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+}
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 47x type MMU
+ */
+static void __cpuinit ppc47x_pin_tlb(unsigned int virt, unsigned int phys)
+{
+	unsigned int rA;
+	int bolted;
+
+	/* Base rA is HW way select, way 0, bolted bit set */
+	rA = 0x88000000;
+
+	/* Look for a bolted entry slot */
+	bolted = ppc47x_find_free_bolted();
+	BUG_ON(bolted < 0);
+
+	/* Insert bolted slot number */
+	rA |= bolted << 24;
+
+	pr_debug("256M TLB entry for 0x%08x->0x%08x in bolt slot %d\n",
+		 virt, phys, bolted);
+
+	mtspr(SPRN_MMUCR, 0);
+
+	__asm__ __volatile__(
+		"tlbwe	%2,%3,0\n"
+		"tlbwe	%1,%3,1\n"
+		"tlbwe	%0,%3,2\n"
+		:
+		: "r" (PPC47x_TLB2_SW | PPC47x_TLB2_SR |
+		       PPC47x_TLB2_SX
+#ifdef CONFIG_SMP
+		       | PPC47x_TLB2_M
+#endif
+		       ),
+		  "r" (phys),
+		  "r" (virt | PPC47x_TLB0_VALID | PPC47x_TLB0_256M),
+		  "r" (rA));
+}
+
 void __init MMU_init_hw(void)
 {
+	/* This is not useful on 47x but won't hurt either */
 	ppc44x_update_tlb_hwater();
 
 	flush_instruction_cache();
@@ -95,8 +188,51 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 	/* Pin in enough TLBs to cover any lowmem not covered by the
 	 * initial 256M mapping established in head_44x.S */
 	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	     addr += PPC_PIN_SIZE) {
+		if (mmu_has_feature(MMU_FTR_TYPE_47x))
+			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+		else
+			ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	}
+	if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
+		ppc47x_update_boltmap();
 
+#ifdef DEBUG
+		{
+			int i;
+
+			printk(KERN_DEBUG "bolted entries: ");
+			for (i = 0; i < 255; i++) {
+				if (test_bit(i, tlb_47x_boltmap))
+					printk("%d ", i);
+			}
+			printk("\n");
+		}
+#endif /* DEBUG */
+	}
 	return total_lowmem;
 }
+
+#ifdef CONFIG_SMP
+void __cpuinit mmu_init_secondary(int cpu)
+{
+	unsigned long addr;
+
+	/* Pin in enough TLBs to cover any lowmem not covered by the
+	 * initial 256M mapping established in head_44x.S
+	 *
+	 * WARNING: This is called with only the first 256M of the
+	 * linear mapping in the TLB and we can't take faults yet
+	 * so beware of what this code uses. It runs off a temporary
+	 * stack. current (r2) isn't initialized, smp_processor_id()
+	 * will not work, current thread info isn't accessible, ...
+	 */
+	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+	     addr += PPC_PIN_SIZE) {
+		if (mmu_has_feature(MMU_FTR_TYPE_47x))
+			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+		else
+			ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	}
+}
+#endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 36692f5..757c0be 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 26fb6b9..1bd712c 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -151,13 +151,14 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (!user_mode(regs) && (address >= TASK_SIZE))
 		return SIGSEGV;
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \
+			     defined(CONFIG_PPC_BOOK3S_64))
   	if (error_code & DSISR_DABRMATCH) {
 		/* DABR match */
 		do_dabr(regs, address, error_code);
 		return 0;
 	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
+#endif
 
 	if (in_atomic() || mm == NULL) {
 		if (!user_mode(regs))
@@ -307,7 +308,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
- survive:
 	ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(ret & VM_FAULT_ERROR)) {
 		if (ret & VM_FAULT_OOM)
@@ -359,15 +359,10 @@ bad_area_nosemaphore:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
+	if (!user_mode(regs))
+		return SIGKILL;
+	pagefault_out_of_memory();
+	return 0;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index c539472..cdc7526 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -2,7 +2,7 @@
  * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
  * E500 Book E processors.
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2010 Freescale Semiconductor, Inc.
  *
  * This file contains the routines for initializing the MMU
  * on the 4xx series of chips.
@@ -56,19 +56,13 @@
 
 unsigned int tlbcam_index;
 
-#define NUM_TLBCAMS	(64)
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
 #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
 #endif
 
-struct tlbcam {
-	u32	MAS0;
-	u32	MAS1;
-	unsigned long	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+#define NUM_TLBCAMS	(64)
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
 	unsigned long start;
@@ -109,19 +103,6 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 	return 0;
 }
 
-void loadcam_entry(int idx)
-{
-	mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
-	mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
-	mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
-	mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
-
-	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
-		mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
-
-	asm volatile("isync;tlbwe;isync" : : : "memory");
-}
-
 /*
  * Set up one of the I/D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
@@ -152,18 +133,13 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 
 	TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
 	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
-	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+	if (mmu_has_feature(MMU_FTR_BIG_PHYS))
 		TLBCAM[index].MAS7 = (u64)phys >> 32;
 
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
 	if (flags & _PAGE_USER) {
 	   TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
 	   TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
 	}
-#else
-	TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
-	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-#endif
 
 	tlbcam_addrs[index].start = virt;
 	tlbcam_addrs[index].limit = virt + size - 1;
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a719f53..3079f6b 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -68,9 +68,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -347,9 +344,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -687,9 +681,6 @@ _GLOBAL(__hash_page_64K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 056d23a..784a400 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -37,7 +37,7 @@
 
 #define HPTE_LOCK_BIT 3
 
-static DEFINE_SPINLOCK(native_tlbie_lock);
+static DEFINE_RAW_SPINLOCK(native_tlbie_lock);
 
 static inline void __tlbie(unsigned long va, int psize, int ssize)
 {
@@ -104,7 +104,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 	if (use_local)
 		use_local = mmu_psize_defs[psize].tlbiel;
 	if (lock_tlbie && !use_local)
-		spin_lock(&native_tlbie_lock);
+		raw_spin_lock(&native_tlbie_lock);
 	asm volatile("ptesync": : :"memory");
 	if (use_local) {
 		__tlbiel(va, psize, ssize);
@@ -114,7 +114,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local)
 		asm volatile("eieio; tlbsync; ptesync": : :"memory");
 	}
 	if (lock_tlbie && !use_local)
-		spin_unlock(&native_tlbie_lock);
+		raw_spin_unlock(&native_tlbie_lock);
 }
 
 static inline void native_lock_hpte(struct hash_pte *hptep)
@@ -122,7 +122,7 @@ static inline void native_lock_hpte(struct hash_pte *hptep)
 	unsigned long *word = &hptep->v;
 
 	while (1) {
-		if (!test_and_set_bit(HPTE_LOCK_BIT, word))
+		if (!test_and_set_bit_lock(HPTE_LOCK_BIT, word))
 			break;
 		while(test_bit(HPTE_LOCK_BIT, word))
 			cpu_relax();
@@ -133,8 +133,7 @@ static inline void native_unlock_hpte(struct hash_pte *hptep)
 {
 	unsigned long *word = &hptep->v;
 
-	asm volatile("lwsync":::"memory");
-	clear_bit(HPTE_LOCK_BIT, word);
+	clear_bit_unlock(HPTE_LOCK_BIT, word);
 }
 
 static long native_hpte_insert(unsigned long hpte_group, unsigned long va,
@@ -434,7 +433,7 @@ static void native_hpte_clear(void)
 	/* we take the tlbie lock and hold it.  Some hardware will
 	 * deadlock if we try to tlbie from two processors at once.
 	 */
-	spin_lock(&native_tlbie_lock);
+	raw_spin_lock(&native_tlbie_lock);
 
 	slots = pteg_count * HPTES_PER_GROUP;
 
@@ -458,7 +457,7 @@ static void native_hpte_clear(void)
 	}
 
 	asm volatile("eieio; tlbsync; ptesync":::"memory");
-	spin_unlock(&native_tlbie_lock);
+	raw_spin_unlock(&native_tlbie_lock);
 	local_irq_restore(flags);
 }
 
@@ -521,7 +520,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE);
 
 		if (lock_tlbie)
-			spin_lock(&native_tlbie_lock);
+			raw_spin_lock(&native_tlbie_lock);
 
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
@@ -536,7 +535,7 @@ static void native_flush_hash_range(unsigned long number, int local)
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
 
 		if (lock_tlbie)
-			spin_unlock(&native_tlbie_lock);
+			raw_spin_unlock(&native_tlbie_lock);
 	}
 
 	local_irq_restore(flags);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3ecdcec..09dffe6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,7 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -384,8 +384,8 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
-		lmb_reserve(phys_addr, block_size * expected_pages);
+	if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+		memblock_reserve(phys_addr, block_size * expected_pages);
 		add_gpage(phys_addr, block_size, expected_pages);
 	}
 	return 0;
@@ -458,7 +458,7 @@ static void __init htab_init_page_sizes(void)
 	 * and we have at least 1G of RAM at boot
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
-	    lmb_phys_mem_size() >= 0x40000000)
+	    memblock_phys_mem_size() >= 0x40000000)
 		mmu_vmemmap_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
 		mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@ static unsigned long __init htab_get_table_size(void)
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	mem_size = lmb_phys_mem_size();
+	mem_size = memblock_phys_mem_size();
 	rnd_mem_size = 1UL << __ilog2(mem_size);
 	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@ static void __init htab_initialize(void)
 		else
 			limit = 0;
 
-		table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+		table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
 
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
@@ -647,9 +647,9 @@ static void __init htab_initialize(void)
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
-						    1, lmb.rmo_size));
+	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+						    1, memblock.rmo_size));
 	memset(linear_map_hash_slots, 0, linear_map_hash_count);
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
@@ -659,16 +659,16 @@ static void __init htab_initialize(void)
 	 */
 
 	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = (unsigned long)__va(lmb.memory.region[i].base);
-		size = lmb.memory.region[i].size;
+	for (i=0; i < memblock.memory.cnt; i++) {
+		base = (unsigned long)__va(memblock.memory.region[i].base);
+		size = memblock.memory.region[i].size;
 
 		DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
 		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and
+		 * in such a way that it will not cross two memblock regions and
 		 * will fit within a single 16Mb page.
 		 * The DART space is assumed to be a full 16Mb region even if
 		 * we only use 2Mb of that space. We will use more of it later
@@ -871,6 +871,18 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
 }
 #endif
 
+void hash_failure_debug(unsigned long ea, unsigned long access,
+			unsigned long vsid, unsigned long trap,
+			int ssize, int psize, unsigned long pte)
+{
+	if (!printk_ratelimit())
+		return;
+	pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+		ea, access, current->comm);
+	pr_info("    trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+		trap, vsid, ssize, psize, pte);
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -955,6 +967,17 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		return 1;
 	}
 
+	/* Add _PAGE_PRESENT to the required access perm */
+	access |= _PAGE_PRESENT;
+
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
 #ifdef CONFIG_HUGETLB_PAGE
 	if (hugeshift)
 		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
 		pte_val(*(ptep + PTRS_PER_PTE)));
 #endif
-	/* Pre-check access permissions (will be re-checked atomically
-	 * in __hash_page_XX but this pre-check is a fast path
-	 */
-	if (access & ~pte_val(*ptep)) {
-		DBG_LOW(" no access !\n");
-		return 1;
-	}
-
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 					    local, ssize, spp);
 	}
 
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+				   pte_val(*ptep));
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
 #else
@@ -1051,8 +1072,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	void *pgdir;
 	pte_t *ptep;
 	unsigned long flags;
-	int local = 0;
-	int ssize;
+	int rc, ssize, local = 0;
 
 	BUG_ON(REGION_ID(ea) != USER_REGION_ID);
 
@@ -1098,11 +1118,18 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Hash it in */
 #ifdef CONFIG_PPC_HAS_HASH_64K
 	if (mm->context.user_psize == MMU_PAGE_64K)
-		__hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
-		__hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-			       subpage_protection(pgdir, ea));
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+				    subpage_protection(pgdir, ea));
+
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   mm->context.user_psize, pte_val(*ptep));
 
 	local_irq_restore(flags);
 }
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index 1995398..cc5c273 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -21,21 +21,13 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	unsigned long old_pte, new_pte;
 	unsigned long va, rflags, pa, sz;
 	long slot;
-	int err = 1;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
 	va = hpt_va(ea, vsid, ssize);
 
-	/*
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
-	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
+	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
 	 *
 	 * 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 
 	do {
 		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/* Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access */
 		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -121,8 +121,16 @@ repeat:
                         }
 		}
 
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, old_pte);
+			return -1;
+		}
 
 		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
@@ -131,9 +139,5 @@ repeat:
 	 * No need to use ldarx/stdcx here
 	 */
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
-	err = 0;
-
- out:
-	return err;
+	return 0;
 }
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 123f707..9bb249c 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -9,6 +9,7 @@
 
 #include <linux/mm.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <linux/hugetlb.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 4ec900a..6a6975d 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,7 +30,8 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -47,7 +48,7 @@
 #include "mmu_decl.h"
 
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
 #endif
@@ -135,17 +136,17 @@ void __init MMU_init(void)
 	/* parse args from command line */
 	MMU_setup();
 
-	if (lmb.memory.cnt > 1) {
+	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		lmb.memory.cnt = 1;
-		lmb_analyze();
+		memblock.memory.cnt = 1;
+		memblock_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
 #endif
 	}
 
-	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
@@ -160,8 +161,8 @@ void __init MMU_init(void)
 		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(lowmem_end_addr);
-		lmb_analyze();
+		memblock_enforce_memory_limit(lowmem_end_addr);
+		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
@@ -199,7 +200,7 @@ void __init *early_get_page(void)
 	if (init_bootmem_done) {
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					__initial_memory_limit_addr));
 	}
 	return p;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 776f28d..71f1415 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -40,8 +40,9 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -251,6 +252,47 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
 }
 #endif /* CONFIG_PPC_BOOK3E */
 
+struct vmemmap_backing *vmemmap_list;
+
+static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
+{
+	static struct vmemmap_backing *next;
+	static int num_left;
+
+	/* allocate a page when required and hand out chunks */
+	if (!next || !num_left) {
+		next = vmemmap_alloc_block(PAGE_SIZE, node);
+		if (unlikely(!next)) {
+			WARN_ON(1);
+			return NULL;
+		}
+		num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
+	}
+
+	num_left--;
+
+	return next++;
+}
+
+static __meminit void vmemmap_list_populate(unsigned long phys,
+					    unsigned long start,
+					    int node)
+{
+	struct vmemmap_backing *vmem_back;
+
+	vmem_back = vmemmap_list_alloc(node);
+	if (unlikely(!vmem_back)) {
+		WARN_ON(1);
+		return;
+	}
+
+	vmem_back->phys = phys;
+	vmem_back->virt_addr = start;
+	vmem_back->list = vmemmap_list;
+
+	vmemmap_list = vmem_back;
+}
+
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
@@ -275,6 +317,8 @@ int __meminit vmemmap_populate(struct page *start_page,
 		if (!p)
 			return -ENOMEM;
 
+		vmemmap_list_populate(__pa(p), start, node);
+
 		pr_debug("      * %016lx..%016lx allocated at %p\n",
 			 start, start + page_size, p);
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index b9b1525..1a84a8d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
@@ -31,7 +32,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
@@ -48,6 +49,7 @@
 #include <asm/sparsemem.h>
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
+#include <asm/swiotlb.h>
 
 #include "mmu_decl.h"
 
@@ -81,13 +83,13 @@ int page_is_ram(unsigned long pfn)
 #else
 	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
-	for (i=0; i < lmb.memory.cnt; i++) {
+	for (i=0; i < memblock.memory.cnt; i++) {
 		unsigned long base;
 
-		base = lmb.memory.region[i].base;
+		base = memblock.memory.region[i].base;
 
 		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
+			(paddr < (base + memblock.memory.region[i].size))) {
 			return 1;
 		}
 	}
@@ -140,14 +142,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
  * memory range.  PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures.  Walk through the
+ * Instead it maintains it in memblock.memory structures.  Walk through the
  * memory regions, find holes and callback for contiguous regions.
  */
 int
 walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
-	struct lmb_property res;
+	struct memblock_property res;
 	unsigned long pfn, len;
 	u64 end;
 	int ret = -1;
@@ -156,7 +158,7 @@ walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 	res.size = (u64) nr_pages << PAGE_SHIFT;
 
 	end = res.base + res.size - 1;
-	while ((res.base < end) && (lmb_find(&res) >= 0)) {
+	while ((res.base < end) && (memblock_find(&res) >= 0)) {
 		pfn = (unsigned long)(res.base >> PAGE_SHIFT);
 		len = (unsigned long)(res.size >> PAGE_SHIFT);
 		ret = (*func)(pfn, len, arg);
@@ -182,8 +184,8 @@ void __init do_init_bootmem(void)
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
 	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -196,16 +198,16 @@ void __init do_init_bootmem(void)
 	 */
 	bootmap_pages = bootmem_bootmap_pages(total_pages);
 
-	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
 	boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
 
 	/* Add active regions with valid PFNs */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -216,17 +218,17 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long addr = lmb.reserved.region[i].base +
-				     lmb_size_bytes(&lmb.reserved, i) - 1;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long addr = memblock.reserved.region[i].base +
+				     memblock_size_bytes(&memblock.reserved, i) - 1;
 		if (addr < lowmem_end_addr)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+		else if (memblock.reserved.region[i].base < lowmem_end_addr) {
 			unsigned long adjusted_size = lowmem_end_addr -
-				      lmb.reserved.region[i].base;
-			reserve_bootmem(lmb.reserved.region[i].base,
+				      memblock.reserved.region[i].base;
+			reserve_bootmem(memblock.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
 		}
 	}
@@ -234,9 +236,9 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, max_pfn);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
+	for (i = 0; i < memblock.reserved.cnt; i++)
+		reserve_bootmem(memblock.reserved.region[i].base,
+				memblock_size_bytes(&memblock.reserved, i),
 				BOOTMEM_DEFAULT);
 
 #endif
@@ -249,20 +251,20 @@ void __init do_init_bootmem(void)
 /* mark pages that don't exist as nosave */
 static int __init mark_nonram_nosave(void)
 {
-	unsigned long lmb_next_region_start_pfn,
-		      lmb_region_max_pfn;
+	unsigned long memblock_next_region_start_pfn,
+		      memblock_region_max_pfn;
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt - 1; i++) {
-		lmb_region_max_pfn =
-			(lmb.memory.region[i].base >> PAGE_SHIFT) +
-			(lmb.memory.region[i].size >> PAGE_SHIFT);
-		lmb_next_region_start_pfn =
-			lmb.memory.region[i+1].base >> PAGE_SHIFT;
+	for (i = 0; i < memblock.memory.cnt - 1; i++) {
+		memblock_region_max_pfn =
+			(memblock.memory.region[i].base >> PAGE_SHIFT) +
+			(memblock.memory.region[i].size >> PAGE_SHIFT);
+		memblock_next_region_start_pfn =
+			memblock.memory.region[i+1].base >> PAGE_SHIFT;
 
-		if (lmb_region_max_pfn < lmb_next_region_start_pfn)
-			register_nosave_region(lmb_region_max_pfn,
-					       lmb_next_region_start_pfn);
+		if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+			register_nosave_region(memblock_region_max_pfn,
+					       memblock_next_region_start_pfn);
 	}
 
 	return 0;
@@ -273,8 +275,8 @@ static int __init mark_nonram_nosave(void)
  */
 void __init paging_init(void)
 {
-	unsigned long total_ram = lmb_phys_mem_size();
-	phys_addr_t top_of_ram = lmb_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
+	phys_addr_t top_of_ram = memblock_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -320,7 +322,12 @@ void __init mem_init(void)
 	struct page *page;
 	unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
 
-	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+#ifdef CONFIG_SWIOTLB
+	if (ppc_swiotlb_enable)
+		swiotlb_init(1);
+#endif
+
+	num_physpages = memblock.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -357,7 +364,7 @@ void __init mem_init(void)
 		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
-			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+			if (memblock_is_reserved(pfn << PAGE_SHIFT))
 				continue;
 			ClearPageReserved(page);
 			init_page_count(page);
@@ -494,13 +501,13 @@ EXPORT_SYMBOL(flush_icache_user_range);
  * This must always be called with the pte lock held.
  */
 void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t pte)
+		      pte_t *ptep)
 {
 #ifdef CONFIG_PPC_STD_MMU
 	unsigned long access = 0, trap;
 
 	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (!pte_young(pte) || address >= TASK_SIZE)
+	if (!pte_young(*ptep) || address >= TASK_SIZE)
 		return;
 
 	/* We try to figure out if we are coming from an instruction
diff --git a/arch/powerpc/mm/mmu_context_hash32.c b/arch/powerpc/mm/mmu_context_hash32.c
index 0dfba2b..d0ee554 100644
--- a/arch/powerpc/mm/mmu_context_hash32.c
+++ b/arch/powerpc/mm/mmu_context_hash32.c
@@ -60,11 +60,7 @@
 static unsigned long next_mmu_context;
 static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
 
-
-/*
- * Set up the context for a new address space.
- */
-int init_new_context(struct task_struct *t, struct mm_struct *mm)
+unsigned long __init_new_context(void)
 {
 	unsigned long ctx = next_mmu_context;
 
@@ -74,19 +70,38 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm)
 			ctx = 0;
 	}
 	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-	mm->context.id = ctx;
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = __init_new_context();
 
 	return 0;
 }
 
 /*
+ * Free a context ID. Make sure to call this with preempt disabled!
+ */
+void __destroy_context(unsigned long ctx)
+{
+	clear_bit(ctx, context_map);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+
+/*
  * We're finished using the context for an address space.
  */
 void destroy_context(struct mm_struct *mm)
 {
 	preempt_disable();
 	if (mm->context.id != NO_CONTEXT) {
-		clear_bit(mm->context.id, context_map);
+		__destroy_context(mm->context.id);
 		mm->context.id = NO_CONTEXT;
 	}
 	preempt_enable();
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index b910d37..2535828 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -19,11 +19,12 @@
 #include <linux/spinlock.h>
 #include <linux/idr.h>
 #include <linux/module.h>
+#include <linux/gfp.h>
 
 #include <asm/mmu_context.h>
 
 static DEFINE_SPINLOCK(mmu_context_lock);
-static DEFINE_IDR(mmu_context_idr);
+static DEFINE_IDA(mmu_context_ida);
 
 /*
  * The proto-VSID space has 2^35 - 1 segments available for user mappings.
@@ -39,11 +40,11 @@ int __init_new_context(void)
 	int err;
 
 again:
-	if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL))
+	if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL))
 		return -ENOMEM;
 
 	spin_lock(&mmu_context_lock);
-	err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index);
+	err = ida_get_new_above(&mmu_context_ida, 1, &index);
 	spin_unlock(&mmu_context_lock);
 
 	if (err == -EAGAIN)
@@ -53,7 +54,7 @@ again:
 
 	if (index > MAX_CONTEXT) {
 		spin_lock(&mmu_context_lock);
-		idr_remove(&mmu_context_idr, index);
+		ida_remove(&mmu_context_ida, index);
 		spin_unlock(&mmu_context_lock);
 		return -ENOMEM;
 	}
@@ -85,7 +86,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 void __destroy_context(int context_id)
 {
 	spin_lock(&mmu_context_lock);
-	idr_remove(&mmu_context_idr, context_id);
+	ida_remove(&mmu_context_ida, context_id);
 	spin_unlock(&mmu_context_lock);
 }
 EXPORT_SYMBOL_GPL(__destroy_context);
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 1044a63..ddfd7ad 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -47,6 +47,7 @@
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
+#include <linux/slab.h>
 
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -56,7 +57,7 @@ static unsigned int next_context, nr_free_contexts;
 static unsigned long *context_map;
 static unsigned long *stale_map[NR_CPUS];
 static struct mm_struct **context_mm;
-static DEFINE_SPINLOCK(context_lock);
+static DEFINE_RAW_SPINLOCK(context_lock);
 
 #define CTX_MAP_SIZE	\
 	(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -121,9 +122,9 @@ static unsigned int steal_context_smp(unsigned int id)
 	/* This will happen if you have more CPUs than available contexts,
 	 * all we can do here is wait a bit and try again
 	 */
-	spin_unlock(&context_lock);
+	raw_spin_unlock(&context_lock);
 	cpu_relax();
-	spin_lock(&context_lock);
+	raw_spin_lock(&context_lock);
 
 	/* This will cause the caller to try again */
 	return MMU_NO_CONTEXT;
@@ -194,7 +195,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	unsigned long *map;
 
 	/* No lockless fast path .. yet */
-	spin_lock(&context_lock);
+	raw_spin_lock(&context_lock);
 
 	pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
 		cpu, next, next->context.active, next->context.id);
@@ -278,7 +279,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	/* Flick the MMU and release lock */
 	pr_hardcont(" -> %d\n", id);
 	set_context(id, next->pgd);
-	spin_unlock(&context_lock);
+	raw_spin_unlock(&context_lock);
 }
 
 /*
@@ -307,7 +308,7 @@ void destroy_context(struct mm_struct *mm)
 
 	WARN_ON(mm->context.active != 0);
 
-	spin_lock_irqsave(&context_lock, flags);
+	raw_spin_lock_irqsave(&context_lock, flags);
 	id = mm->context.id;
 	if (id != MMU_NO_CONTEXT) {
 		__clear_bit(id, context_map);
@@ -318,7 +319,7 @@ void destroy_context(struct mm_struct *mm)
 		context_mm[id] = NULL;
 		nr_free_contexts++;
 	}
-	spin_unlock_irqrestore(&context_lock, flags);
+	raw_spin_unlock_irqrestore(&context_lock, flags);
 }
 
 #ifdef CONFIG_SMP
@@ -394,10 +395,18 @@ void __init mmu_context_init(void)
 	 * the PID/TID comparison is disabled, so we can use a TID of zero
 	 * to represent all kernel pages as shared among all contexts.
 	 * 	-- Dan
+	 *
+	 * The IBM 47x core supports 16-bit PIDs, thus 65535 contexts. We
+	 * should normally never have to steal though the facility is
+	 * present if needed.
+	 *      -- BenH
 	 */
 	if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
 		first_context = 0;
 		last_context = 15;
+	} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
+		first_context = 1;
+		last_context = 65535;
 	} else {
 		first_context = 1;
 		last_context = 255;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d49a775..63b84a0 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -69,12 +69,7 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
 }
 #endif /* CONIFG_8xx */
 
-/*
- * As of today, we don't support tlbivax broadcast on any
- * implementation. When that becomes the case, this will be
- * an extern.
- */
-#ifdef CONFIG_PPC_BOOK3E
+#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
 extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
 			   unsigned int tsize, unsigned int ind);
 #else
@@ -149,7 +144,15 @@ extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
-
+extern void loadcam_entry(unsigned int index);
+
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	unsigned long	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
 #elif defined(CONFIG_PPC32)
 /* anything 32-bit except 4xx or 8xx */
 extern void MMU_init_hw(void);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index b037d95..aa731af 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,7 +17,7 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/pfn.h>
 #include <asm/sparsemem.h>
@@ -33,16 +33,41 @@ static int numa_debug;
 #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); }
 
 int numa_cpu_lookup_table[NR_CPUS];
-cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
+cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES];
 
 EXPORT_SYMBOL(numa_cpu_lookup_table);
-EXPORT_SYMBOL(numa_cpumask_lookup_table);
+EXPORT_SYMBOL(node_to_cpumask_map);
 EXPORT_SYMBOL(node_data);
 
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: node_to_cpumask() is not valid until after this is done.
+ */
+static void __init setup_node_to_cpumask_map(void)
+{
+	unsigned int node, num = 0;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES) {
+		for_each_node_mask(node, node_possible_map)
+			num = node;
+		nr_node_ids = num + 1;
+	}
+
+	/* allocate the map */
+	for (node = 0; node < nr_node_ids; node++)
+		alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
+
+	/* cpumask_of_node() will now work */
+	dbg("Node to cpumask map for %d nodes\n", nr_node_ids);
+}
+
 static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn,
 						unsigned int *nid)
 {
@@ -138,8 +163,8 @@ static void __cpuinit map_cpu_to_node(int cpu, int node)
 
 	dbg("adding cpu %d to node %d\n", cpu, node);
 
-	if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node])))
-		cpu_set(cpu, numa_cpumask_lookup_table[node]);
+	if (!(cpumask_test_cpu(cpu, node_to_cpumask_map[node])))
+		cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -149,8 +174,8 @@ static void unmap_cpu_from_node(unsigned long cpu)
 
 	dbg("removing cpu %lu from node %d\n", cpu, node);
 
-	if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
-		cpu_clear(cpu, numa_cpumask_lookup_table[node]);
+	if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
+		cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
 	} else {
 		printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
 		       cpu, node);
@@ -242,10 +267,12 @@ EXPORT_SYMBOL_GPL(of_node_to_nid);
  */
 static int __init find_min_common_depth(void)
 {
-	int depth;
+	int depth, index;
 	const unsigned int *ref_points;
 	struct device_node *rtas_root;
 	unsigned int len;
+	struct device_node *chosen;
+	const char *vec5;
 
 	rtas_root = of_find_node_by_path("/rtas");
 
@@ -258,11 +285,26 @@ static int __init find_min_common_depth(void)
 	 * configuration (should be all 0's) and the second is for a normal
 	 * NUMA configuration.
 	 */
+	index = 1;
 	ref_points = of_get_property(rtas_root,
 			"ibm,associativity-reference-points", &len);
 
+	/*
+	 * For form 1 affinity information we want the first field
+	 */
+#define VEC5_AFFINITY_BYTE	5
+#define VEC5_AFFINITY		0x80
+	chosen = of_find_node_by_path("/chosen");
+	if (chosen) {
+		vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
+		if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
+			dbg("Using form 1 affinity\n");
+			index = 0;
+		}
+	}
+
 	if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
-		depth = ref_points[1];
+		depth = ref_points[index];
 	} else {
 		dbg("NUMA: ibm,associativity-reference-points not found.\n");
 		depth = -1;
@@ -309,7 +351,7 @@ struct of_drconf_cell {
 #define DRCONF_MEM_RESERVED	0x00000080
 
 /*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
 static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -330,8 +372,8 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
 /*
  * Retreive and validate the ibm,dynamic-memory property of the device tree.
  *
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries.  Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as layed out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -451,7 +493,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu)
 	nid = of_node_to_nid_single(cpu);
 
 	if (nid < 0 || !node_online(nid))
-		nid = any_online_node(NODE_MASK_ALL);
+		nid = first_online_node;
 out:
 	map_cpu_to_node(lcpu, nid);
 
@@ -498,19 +540,19 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 						      unsigned long size)
 {
 	/*
-	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
+	 * We use memblock_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.  Also, in the case of
 	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (start + size <= lmb_end_of_DRAM())
+	if (start + size <= memblock_end_of_DRAM())
 		return size;
 
-	if (start >= lmb_end_of_DRAM())
+	if (start >= memblock_end_of_DRAM())
 		return 0;
 
-	return lmb_end_of_DRAM() - start;
+	return memblock_end_of_DRAM() - start;
 }
 
 /*
@@ -689,7 +731,7 @@ new_range:
 	}
 
 	/*
-	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
 	 * property in the ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -701,8 +743,8 @@ new_range:
 
 static void __init setup_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned long start_pfn, end_pfn;
 	unsigned int i, nid = 0;
 
@@ -711,9 +753,9 @@ static void __init setup_nonnuma(void)
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	for (i = 0; i < lmb.memory.cnt; ++i) {
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; ++i) {
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 
 		fake_numa_create_new_node(end_pfn, &nid);
 		add_active_range(nid, start_pfn, end_pfn);
@@ -737,8 +779,9 @@ void __init dump_numa_cpu_topology(void)
 		 * If we used a CPU iterator here we would miss printing
 		 * the holes in the cpumap.
 		 */
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
-			if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
+		for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+			if (cpumask_test_cpu(cpu,
+					node_to_cpumask_map[node])) {
 				if (count == 0)
 					printk(" %u", cpu);
 				++count;
@@ -750,7 +793,7 @@ void __init dump_numa_cpu_topology(void)
 		}
 
 		if (count > 1)
-			printk("-%u", NR_CPUS - 1);
+			printk("-%u", nr_cpu_ids - 1);
 		printk("\n");
 	}
 }
@@ -770,7 +813,7 @@ static void __init dump_numa_memory_topology(void)
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM();
+		for (i = 0; i < memblock_end_of_DRAM();
 		     i += (1 << SECTION_SIZE_BITS)) {
 			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
@@ -790,7 +833,7 @@ static void __init dump_numa_memory_topology(void)
 }
 
 /*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
  * required. nid is the preferred node and end is the physical address of
  * the highest address in the node.
  *
@@ -804,11 +847,11 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 	int new_nid;
 	unsigned long ret_paddr;
 
-	ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret_paddr)
-		ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
 
 	if (!ret_paddr)
 		panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -818,14 +861,14 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 
 	/*
 	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the LMB allocator to the
+	 * and hand over control from the MEMBLOCK allocator to the
 	 * bootmem allocator.  If this function is called for
 	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the LMB allocator.
+	 * bootmem allocator instead of the MEMBLOCK allocator.
 	 *
 	 * So, check the nid from which this allocation came
 	 * and double check to see if we need to use bootmem
-	 * instead of the LMB.  We don't free the LMB memory
+	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
 	 * since it would be useless.
 	 */
 	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -850,9 +893,9 @@ static void mark_reserved_regions_for_nid(int nid)
 	struct pglist_data *node = NODE_DATA(nid);
 	int i;
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long physbase = memblock.reserved.region[i].base;
+		unsigned long size = memblock.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
 		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
@@ -860,7 +903,7 @@ static void mark_reserved_regions_for_nid(int nid)
 					     node->node_spanned_pages;
 
 		/*
-		 * Check to make sure that this lmb.reserved area is
+		 * Check to make sure that this memblock.reserved area is
 		 * within the bounds of the node that we care about.
 		 * Checking the nid of the start and end points is not
 		 * sufficient because the reserved area could span the
@@ -918,7 +961,7 @@ void __init do_init_bootmem(void)
 	int nid;
 
 	min_low_pfn = 0;
-	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
 	if (parse_numa_properties())
@@ -926,10 +969,6 @@ void __init do_init_bootmem(void)
 	else
 		dump_numa_memory_topology();
 
-	register_cpu_notifier(&ppc64_numa_nb);
-	cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
-			  (void *)(unsigned long)boot_cpuid);
-
 	for_each_online_node(nid) {
 		unsigned long start_pfn, end_pfn;
 		void *bootmem_vaddr;
@@ -983,13 +1022,23 @@ void __init do_init_bootmem(void)
 	}
 
 	init_bootmem_done = 1;
+
+	/*
+	 * Now bootmem is initialised we can create the node to cpumask
+	 * lookup tables and setup the cpu callback to populate them.
+	 */
+	setup_node_to_cpumask_map();
+
+	register_cpu_notifier(&ppc64_numa_nb);
+	cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
+			  (void *)(unsigned long)boot_cpuid);
 }
 
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -1064,7 +1113,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
 /*
  * Find the node associated with a hot added memory section for memory
  * represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
@@ -1105,8 +1154,8 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr)
 
 /*
  * Find the node associated with a hot added memory section.  Section
- * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
  */
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
@@ -1114,7 +1163,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
 	int nid, found = 0;
 
 	if (!numa_enabled || (min_common_depth < 0))
-		return any_online_node(NODE_MASK_ALL);
+		return first_online_node;
 
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
 	if (memory) {
@@ -1125,7 +1174,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
 	}
 
 	if (nid < 0 || !node_online(nid))
-		nid = any_online_node(NODE_MASK_ALL);
+		nid = first_online_node;
 
 	if (NODE_DATA(nid)->node_spanned_pages)
 		return nid;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 99df697..ebc2f38 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 573b3bd..a87ead0 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -26,7 +26,8 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -114,11 +115,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	struct page *ptepage;
 
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
 	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
 
 	ptepage = alloc_pages(flags, 0);
 	if (!ptepage)
@@ -145,6 +142,14 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
 	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
+#ifdef _PAGE_BAP_SR
+	/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
+	 * which means that we just cleared supervisor access... oops ;-) This
+	 * restores it
+	 */
+	flags |= _PAGE_BAP_SR;
+#endif
+
 	return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -193,7 +198,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
-	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+	    !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -326,7 +331,7 @@ void __init mapin_ram(void)
 		s = mmu_mapin_ram(top);
 		__mapin_ram_chunk(s, top);
 
-		top = lmb_end_of_DRAM();
+		top = memblock_end_of_DRAM();
 		s = wii_mmu_mapin_mem2(top);
 		__mapin_ram_chunk(s, top);
 	}
@@ -384,11 +389,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot)
 		return -EINVAL;
 	__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
 	wmb();
-#ifdef CONFIG_PPC_STD_MMU
-	flush_hash_pages(0, address, pmd_val(*kpmd), 1);
-#else
 	flush_tlb_page(NULL, address);
-#endif
 	pte_unmap(kpte);
 
 	return 0;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 853d556..21d6dfa 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -34,7 +34,8 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -66,7 +67,7 @@ static void *early_alloc_pgtable(unsigned long size)
 	if (init_bootmem_done)
 		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
 	else
-		pt = __va(lmb_alloc_base(size, size,
+		pt = __va(memblock_alloc_base(size, size,
 					 __pa(MAX_DMA_ADDRESS)));
 	memset(pt, 0, size);
 
@@ -264,6 +265,14 @@ void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
 	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
+#ifdef _PAGE_BAP_SR
+	/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
+	 * which means that we just cleared supervisor access... oops ;-) This
+	 * restores it
+	 */
+	flags |= _PAGE_BAP_SR;
+#endif
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags, caller);
 	return __ioremap_caller(addr, size, flags, caller);
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index f11c2cd..f8a0182 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
@@ -223,7 +223,7 @@ void __init MMU_init_hw(void)
 	 * Find some memory for the hash table.
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+	Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
 				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 687fdda..446a018 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,7 +12,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -252,7 +252,7 @@ void __init stabs_alloc(void)
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+		newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
 					 1<<SID_SHIFT);
 		newstab = (unsigned long)__va(newstab);
 
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index a040b81..e4f8f1f 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/gfp.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 282d930..1ec0657 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -63,15 +63,21 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
 		psize = get_slice_psize(mm, addr);
+		/* Mask the address for the correct page size */
+		addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
 #endif
-	} else
+	} else {
 		psize = pte_pagesize_index(mm, addr, pte);
+		/* Mask the address for the standard page size.  If we
+		 * have a 64k page kernel, but the hardware does not
+		 * support 64k pages, this might be different from the
+		 * hardware page size encoded in the slice table. */
+		addr &= PAGE_MASK;
+	}
 
-	/* Mask the address for the correct page size */
-	addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
 
 	/* Build full vaddr */
 	if (!is_kernel_addr(addr)) {
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index f288279..8b04c54 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -1,5 +1,5 @@
 /*
- *  Low leve TLB miss handlers for Book3E
+ *  Low level TLB miss handlers for Book3E
  *
  *  Copyright (C) 2008-2009
  *      Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 2fbc680..d8695b0 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -34,7 +34,7 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -150,7 +150,7 @@ EXPORT_SYMBOL(local_flush_tlb_page);
  */
 #ifdef CONFIG_SMP
 
-static DEFINE_SPINLOCK(tlbivax_lock);
+static DEFINE_RAW_SPINLOCK(tlbivax_lock);
 
 static int mm_is_core_local(struct mm_struct *mm)
 {
@@ -232,10 +232,10 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
 			if (lock)
-				spin_lock(&tlbivax_lock);
+				raw_spin_lock(&tlbivax_lock);
 			_tlbivax_bcast(vmaddr, pid, tsize, ind);
 			if (lock)
-				spin_unlock(&tlbivax_lock);
+				raw_spin_unlock(&tlbivax_lock);
 			goto bail;
 		} else {
 			struct tlb_flush_param p = {
@@ -426,7 +426,7 @@ static void __early_init_mmu(int boot_cpu)
 	/* Set the global containing the top of the linear mapping
 	 * for use by the TLB miss code
 	 */
-	linear_map_top = lmb_end_of_DRAM();
+	linear_map_top = memblock_end_of_DRAM();
 
 	/* A sync won't hurt us after mucking around with
 	 * the MMU configuration
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index bbdc5b5..cfa7682 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -10,7 +10,7 @@
  *	- tlbil_va
  *	- tlbil_pid
  *	- tlbil_all
- *	- tlbivax_bcast (not yet)
+ *	- tlbivax_bcast
  *
  * Code mostly moved over from misc_32.S
  *
@@ -33,6 +33,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor.h>
+#include <asm/bug.h>
 
 #if defined(CONFIG_40x)
 
@@ -65,7 +66,7 @@ _GLOBAL(__tlbil_va)
  * Nothing to do for 8xx, everything is inline
  */
 
-#elif defined(CONFIG_44x)
+#elif defined(CONFIG_44x) /* Includes 47x */
 
 /*
  * 440 implementation uses tlbsx/we for tlbil_va and a full sweep
@@ -73,7 +74,13 @@ _GLOBAL(__tlbil_va)
  */
 _GLOBAL(__tlbil_va)
 	mfspr	r5,SPRN_MMUCR
-	rlwimi	r5,r4,0,24,31			/* Set TID */
+	mfmsr   r10
+
+	/*
+	 * We write 16 bits of STID since 47x supports that much, we
+	 * will never be passed out of bounds values on 440 (hopefully)
+	 */
+	rlwimi  r5,r4,0,16,31
 
 	/* We have to run the search with interrupts disabled, otherwise
 	 * an interrupt which causes a TLB miss can clobber the MMUCR
@@ -83,24 +90,41 @@ _GLOBAL(__tlbil_va)
 	 * and restoring MMUCR, so only normal interrupts have to be
 	 * taken care of.
 	 */
-	mfmsr	r4
 	wrteei	0
 	mtspr	SPRN_MMUCR,r5
-	tlbsx.	r3, 0, r3
-	wrtee	r4
-	bne	1f
+	tlbsx.	r6,0,r3
+	bne	10f
 	sync
-	/* There are only 64 TLB entries, so r3 < 64,
-	 * which means bit 22, is clear.  Since 22 is
-	 * the V bit in the TLB_PAGEID, loading this
+BEGIN_MMU_FTR_SECTION
+	b	2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+	/* On 440 There are only 64 TLB entries, so r3 < 64, which means bit
+	 * 22, is clear.  Since 22 is the V bit in the TLB_PAGEID, loading this
 	 * value will invalidate the TLB entry.
 	 */
-	tlbwe	r3, r3, PPC44x_TLB_PAGEID
+	tlbwe	r6,r6,PPC44x_TLB_PAGEID
 	isync
-1:	blr
+10:	wrtee	r10
+	blr
+2:
+#ifdef CONFIG_PPC_47x
+	oris	r7,r6,0x8000	/* specify way explicitely */
+	clrrwi	r4,r3,12	/* get an EPN for the hashing with V = 0 */
+	ori	r4,r4,PPC47x_TLBE_SIZE
+	tlbwe   r4,r7,0		/* write it */
+	isync
+	wrtee	r10
+	blr
+#else /* CONFIG_PPC_47x */
+1:	trap
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
+#endif /* !CONFIG_PPC_47x */
 
 _GLOBAL(_tlbil_all)
 _GLOBAL(_tlbil_pid)
+BEGIN_MMU_FTR_SECTION
+	b	2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	li	r3,0
 	sync
 
@@ -115,6 +139,76 @@ _GLOBAL(_tlbil_pid)
 
 	isync
 	blr
+2:
+#ifdef CONFIG_PPC_47x
+	/* 476 variant. There's not simple way to do this, hopefully we'll
+	 * try to limit the amount of such full invalidates
+	 */
+	mfmsr	r11		/* Interrupts off */
+	wrteei	0
+	li	r3,-1		/* Current set */
+	lis	r10,tlb_47x_boltmap@h
+	ori	r10,r10,tlb_47x_boltmap@l
+	lis	r7,0x8000	/* Specify way explicitely */
+
+	b	9f		/* For each set */
+
+1:	li	r9,4		/* Number of ways */
+	li	r4,0		/* Current way */
+	li	r6,0		/* Default entry value 0 */
+	andi.	r0,r8,1		/* Check if way 0 is bolted */
+	mtctr	r9		/* Load way counter */
+	bne-	3f		/* Bolted, skip loading it */
+
+2:	/* For each way */
+	or	r5,r3,r4	/* Make way|index for tlbre */
+	rlwimi	r5,r5,16,8,15	/* Copy index into position */
+	tlbre	r6,r5,0		/* Read entry */
+3:	addis	r4,r4,0x2000	/* Next way */
+	andi.	r0,r6,PPC47x_TLB0_VALID /* Valid entry ? */
+	beq	4f		/* Nope, skip it */
+	rlwimi	r7,r5,0,1,2	/* Insert way number */
+	rlwinm	r6,r6,0,21,19	/* Clear V */
+	tlbwe   r6,r7,0		/* Write it */
+4:	bdnz	2b		/* Loop for each way */
+	srwi	r8,r8,1		/* Next boltmap bit */
+9:	cmpwi	cr1,r3,255	/* Last set done ? */
+	addi	r3,r3,1		/* Next set */
+	beq	cr1,1f		/* End of loop */
+	andi.	r0,r3,0x1f	/* Need to load a new boltmap word ? */
+	bne	1b		/* No, loop */
+	lwz	r8,0(r10)	/* Load boltmap entry */
+	addi	r10,r10,4	/* Next word */
+	b	1b		/* Then loop */
+1:	isync			/* Sync shadows */
+	wrtee	r11
+#else /* CONFIG_PPC_47x */
+1:	trap
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
+#endif /* !CONFIG_PPC_47x */
+	blr
+
+#ifdef CONFIG_PPC_47x
+/*
+ * _tlbivax_bcast is only on 47x. We don't bother doing a runtime
+ * check though, it will blow up soon enough if we mistakenly try
+ * to use it on a 440.
+ */
+_GLOBAL(_tlbivax_bcast)
+	mfspr	r5,SPRN_MMUCR
+	mfmsr	r10
+	rlwimi	r5,r4,0,16,31
+	wrteei	0
+	mtspr	SPRN_MMUCR,r5
+/*	tlbivax	0,r3 - use .long to avoid binutils deps */
+	.long 0x7c000624 | (r3 << 11)
+	isync
+	eieio
+	tlbsync
+	sync
+	wrtee	r10
+	blr
+#endif /* CONFIG_PPC_47x */
 
 #elif defined(CONFIG_FSL_BOOKE)
 /*
@@ -271,3 +365,31 @@ _GLOBAL(set_context)
 #else
 #error Unsupported processor type !
 #endif
+
+#if defined(CONFIG_FSL_BOOKE)
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+	LOAD_REG_ADDR(r4, TLBCAM)
+	mulli	r5,r3,TLBCAM_SIZE
+	add	r3,r5,r4
+	lwz	r4,TLBCAM_MAS0(r3)
+	mtspr	SPRN_MAS0,r4
+	lwz	r4,TLBCAM_MAS1(r3)
+	mtspr	SPRN_MAS1,r4
+	PPC_LL	r4,TLBCAM_MAS2(r3)
+	mtspr	SPRN_MAS2,r4
+	lwz	r4,TLBCAM_MAS3(r3)
+	mtspr	SPRN_MAS3,r4
+BEGIN_MMU_FTR_SECTION
+	lwz	r4,TLBCAM_MAS7(r3)
+	mtspr	SPRN_MAS7,r4
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+	isync
+	tlbwe
+	isync
+	blr
+#endif
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 6b793ae..642fca1 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -26,6 +26,7 @@
 #include <linux/notifier.h>
 #include <linux/numa.h>
 #include <linux/oprofile.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include "pr_util.h"
 
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index c591339..c579b16 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -20,6 +20,7 @@
 #include <linux/string.h>
 #include <linux/uaccess.h>
 #include <linux/elf.h>
+#include <linux/slab.h>
 #include "pr_util.h"
 
 
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2c9e522..7fd90d0 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1077,7 +1077,7 @@ static int calculate_lfsr(int n)
 		index = ENTRIES-1;
 
 	/* make sure index is valid */
-	if ((index > ENTRIES) || (index < 0))
+	if ((index >= ENTRIES) || (index < 0))
 		index = ENTRIES-1;
 
 	return initial_lfsr[index];
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 7486bff..69d668c 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -1,3 +1,12 @@
+config PPC_47x
+	bool "Support for 47x variant"
+	depends on 44x
+	default n
+	select MPIC
+	help
+	  This option enables support for the 47x family of processors and is
+	  not currently compatible with other 44x or 46x varients
+
 config BAMBOO
 	bool "Bamboo"
 	depends on 44x
@@ -151,6 +160,28 @@ config YOSEMITE
 	help
 	  This option enables support for the AMCC PPC440EP evaluation board.
 
+config ISS4xx
+	bool "ISS 4xx Simulator"
+	depends on (44x || 40x)
+	default n
+	select 405GP if 40x
+	select 440GP if 44x && !PPC_47x
+	select PPC_FPU
+	select OF_RTC
+	help
+	  This option enables support for the IBM ISS simulation environment
+
+config ICON
+	bool "Icon"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 440SPe
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index ee6185a..82ff326 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
+obj-$(CONFIG_ISS4xx)	+= iss4xx.o
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
new file mode 100644
index 0000000..aa46e9d
--- /dev/null
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -0,0 +1,167 @@
+/*
+ * PPC476 board specific routines
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+static __initdata struct of_device_id iss4xx_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init iss4xx_device_probe(void)
+{
+	of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
+	of_instantiate_rtc();
+
+	return 0;
+}
+machine_device_initcall(iss4xx, iss4xx_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init iss4xx_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "ibm,uic")) {
+		uic_init_tree();
+		ppc_md.get_irq = uic_get_irq;
+#ifdef CONFIG_MPIC
+	} else if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+					       " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+#endif
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
+					       NULL);
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
+		return;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+}
+
+static struct smp_ops_t iss_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_iss4xx_setup_cpu,
+	.kick_cpu	= smp_iss4xx_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init iss4xx_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &iss_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init iss4xx_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init iss4xx_setup_arch(void)
+{
+	iss4xx_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init iss4xx_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(iss4xx) {
+	.name			= "ISS-4xx",
+	.probe			= iss4xx_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= iss4xx_init_irq,
+	.setup_arch		= iss4xx_setup_arch,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index e8c23cc..5f7a29d 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -61,7 +61,8 @@ static char *board[] __initdata = {
 	"amcc,redwood",
 	"amcc,sequoia",
 	"amcc,taishan",
-	"amcc,yosemite"
+	"amcc,yosemite",
+	"mosaixtech,icon"
 };
 
 static int __init ppc44x_probe(void)
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index e5c1b09..8f77139 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
 #include <linux/of_i2c.h>
+#include <linux/slab.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 84544d0..4c42246 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -698,8 +698,7 @@ static struct clk_interface mpc5121_clk_functions = {
 	.clk_get_parent		= NULL,
 };
 
-static int
-mpc5121_clk_init(void)
+int __init mpc5121_clk_init(void)
 {
 	struct device_node *np;
 
@@ -724,6 +723,3 @@ mpc5121_clk_init(void)
 	clk_functions = mpc5121_clk_functions;
 	return 0;
 }
-
-
-arch_initcall(mpc5121_clk_init);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 441abc4..ee6ae12 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -64,8 +64,9 @@ define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
 	.setup_arch		= mpc5121_ads_setup_arch,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
index da9b20a..4ecf4cf 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -79,7 +79,7 @@ cpld_unmask_irq(unsigned int irq)
 }
 
 static struct irq_chip cpld_pic = {
-	.name = " CPLD PIC ",
+	.name = "CPLD PIC",
 	.mask = cpld_mask_irq,
 	.ack = cpld_mask_irq,
 	.unmask = cpld_unmask_irq,
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
index 2479de9..a6c0e3a 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -51,8 +51,9 @@ static int __init mpc5121_generic_probe(void)
 define_machine(mpc5121_generic) {
 	.name			= "MPC5121 generic",
 	.probe			= mpc5121_generic_probe,
-	.init			= mpc512x_declare_of_platform_devices,
+	.init			= mpc512x_init,
 	.init_IRQ		= mpc512x_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
 };
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index 22a5352..b2daca0 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -12,5 +12,8 @@
 #ifndef __MPC512X_H__
 #define __MPC512X_H__
 extern void __init mpc512x_init_IRQ(void);
+extern void __init mpc512x_init(void);
+extern int __init mpc5121_clk_init(void);
 void __init mpc512x_declare_of_platform_devices(void);
+extern void mpc512x_restart(char *cmd);
 #endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 434d683..707e572 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -21,9 +21,39 @@
 #include <asm/ipic.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/mpc5121.h>
+#include <asm/mpc52xx_psc.h>
 
 #include "mpc512x.h"
 
+static struct mpc512x_reset_module __iomem *reset_module_base;
+
+static void __init mpc512x_restart_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+	if (!np)
+		return;
+
+	reset_module_base = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void mpc512x_restart(char *cmd)
+{
+	if (reset_module_base) {
+		/* Enable software reset "RSTE" */
+		out_be32(&reset_module_base->rpr, 0x52535445);
+		/* Set software hard reset */
+		out_be32(&reset_module_base->rcr, 0x2);
+	} else {
+		pr_err("Restart module not mapped.\n");
+	}
+	for (;;)
+		;
+}
+
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
@@ -53,8 +83,99 @@ static struct of_device_id __initdata of_bus_ids[] = {
 
 void __init mpc512x_declare_of_platform_devices(void)
 {
+	struct device_node *np;
+
 	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
 		printk(KERN_ERR __FILE__ ": "
 			"Error while probing of_platform bus\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc");
+	if (np) {
+		of_platform_device_create(np, NULL, NULL);
+		of_node_put(np);
+	}
 }
 
+#define DEFAULT_FIFO_SIZE 16
+
+static unsigned int __init get_fifo_size(struct device_node *np,
+					 char *prop_name)
+{
+	const unsigned int *fp;
+
+	fp = of_get_property(np, prop_name, NULL);
+	if (fp)
+		return *fp;
+
+	pr_warning("no %s property in %s node, defaulting to %d\n",
+		   prop_name, np->full_name, DEFAULT_FIFO_SIZE);
+
+	return DEFAULT_FIFO_SIZE;
+}
+
+#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
+		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
+
+/* Init PSC FIFO space for TX and RX slices */
+void __init mpc512x_psc_fifo_init(void)
+{
+	struct device_node *np;
+	void __iomem *psc;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
+	int fifobase = 0; /* current fifo address in 32 bit words */
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
+		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
+
+		/* size in register is in 4 byte units */
+		tx_fifo_size /= 4;
+		rx_fifo_size /= 4;
+		if (!tx_fifo_size)
+			tx_fifo_size = 1;
+		if (!rx_fifo_size)
+			rx_fifo_size = 1;
+
+		psc = of_iomap(np, 0);
+		if (!psc) {
+			pr_err("%s: Can't map %s device\n",
+				__func__, np->full_name);
+			continue;
+		}
+
+		/* FIFO space is 4KiB, check if requested size is available */
+		if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
+			pr_err("%s: no fifo space available for %s\n",
+				__func__, np->full_name);
+			iounmap(psc);
+			/*
+			 * chances are that another device requests less
+			 * fifo space, so we continue.
+			 */
+			continue;
+		}
+
+		/* set tx and rx fifo size registers */
+		out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
+		fifobase += tx_fifo_size;
+		out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
+		fifobase += rx_fifo_size;
+
+		/* reset and enable the slices */
+		out_be32(&FIFOC(psc)->txcmd, 0x80);
+		out_be32(&FIFOC(psc)->txcmd, 0x01);
+		out_be32(&FIFOC(psc)->rxcmd, 0x80);
+		out_be32(&FIFOC(psc)->rxcmd, 0x01);
+
+		iounmap(psc);
+	}
+}
+
+void __init mpc512x_init(void)
+{
+	mpc512x_declare_of_platform_devices();
+	mpc5121_clk_init();
+	mpc512x_restart_init();
+	mpc512x_psc_fifo_init();
+}
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 2b8d8ef..ca5305a 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -19,6 +19,7 @@
 
 #include <linux/of.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/of_gpio.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>
@@ -167,7 +168,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev,
 	ofchip->gc.get              = mpc52xx_wkup_gpio_get;
 	ofchip->gc.set              = mpc52xx_wkup_gpio_set;
 
-	ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
 		return ret;
 
@@ -192,8 +193,11 @@ static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = {
 };
 
 static struct of_platform_driver mpc52xx_wkup_gpiochip_driver = {
-	.name = "gpio_wkup",
-	.match_table = mpc52xx_wkup_gpiochip_match,
+	.driver = {
+		.name = "gpio_wkup",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_wkup_gpiochip_match,
+	},
 	.probe = mpc52xx_wkup_gpiochip_probe,
 	.remove = mpc52xx_gpiochip_remove,
 };
@@ -328,7 +332,7 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev,
 	ofchip->gc.get              = mpc52xx_simple_gpio_get;
 	ofchip->gc.set              = mpc52xx_simple_gpio_set;
 
-	ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
 		return ret;
 
@@ -348,8 +352,11 @@ static const struct of_device_id mpc52xx_simple_gpiochip_match[] = {
 };
 
 static struct of_platform_driver mpc52xx_simple_gpiochip_driver = {
-	.name = "gpio",
-	.match_table = mpc52xx_simple_gpiochip_match,
+	.driver = {
+		.name = "gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_simple_gpiochip_match,
+	},
 	.probe = mpc52xx_simple_gpiochip_probe,
 	.remove = mpc52xx_gpiochip_remove,
 };
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 6f8ebe1..46c9357 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -62,6 +62,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
@@ -553,7 +554,7 @@ static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data,
 	return 0;
 }
 
-static struct watchdog_info mpc5200_wdt_info = {
+static const struct watchdog_info mpc5200_wdt_info = {
 	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
 	.identity	= WDT_IDENTITY,
 };
@@ -711,7 +712,11 @@ static int __devinit mpc52xx_gpt_wdt_init(void)
 	return 0;
 }
 
-#define mpc52xx_gpt_wdt_setup(x, y)		(0)
+static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
+					const u32 *period)
+{
+	return 0;
+}
 
 #endif	/*  CONFIG_MPC5200_WDT	*/
 
@@ -729,8 +734,8 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
 
 	spin_lock_init(&gpt->lock);
 	gpt->dev = &ofdev->dev;
-	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node);
-	gpt->regs = of_iomap(ofdev->node, 0);
+	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
+	gpt->regs = of_iomap(ofdev->dev.of_node, 0);
 	if (!gpt->regs) {
 		kfree(gpt);
 		return -ENOMEM;
@@ -738,21 +743,21 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
 
 	dev_set_drvdata(&ofdev->dev, gpt);
 
-	mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
-	mpc52xx_gpt_irq_setup(gpt, ofdev->node);
+	mpc52xx_gpt_gpio_setup(gpt, ofdev->dev.of_node);
+	mpc52xx_gpt_irq_setup(gpt, ofdev->dev.of_node);
 
 	mutex_lock(&mpc52xx_gpt_list_mutex);
 	list_add(&gpt->list, &mpc52xx_gpt_list);
 	mutex_unlock(&mpc52xx_gpt_list_mutex);
 
 	/* check if this device could be a watchdog */
-	if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) ||
-	    of_get_property(ofdev->node, "has-wdt", NULL)) {
+	if (of_get_property(ofdev->dev.of_node, "fsl,has-wdt", NULL) ||
+	    of_get_property(ofdev->dev.of_node, "has-wdt", NULL)) {
 		const u32 *on_boot_wdt;
 
 		gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
-		on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot",
-					      NULL);
+		on_boot_wdt = of_get_property(ofdev->dev.of_node,
+					      "fsl,wdt-on-boot", NULL);
 		if (on_boot_wdt) {
 			dev_info(gpt->dev, "used as watchdog\n");
 			gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
@@ -779,8 +784,11 @@ static const struct of_device_id mpc52xx_gpt_match[] = {
 };
 
 static struct of_platform_driver mpc52xx_gpt_driver = {
-	.name = "mpc52xx-gpt",
-	.match_table = mpc52xx_gpt_match,
+	.driver = {
+		.name = "mpc52xx-gpt",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_gpt_match,
+	},
 	.probe = mpc52xx_gpt_probe,
 	.remove = mpc52xx_gpt_remove,
 };
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 929d017..e86aec6 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -445,14 +445,14 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
 	if (lpbfifo.dev != NULL)
 		return -ENOSPC;
 
-	lpbfifo.irq = irq_of_parse_and_map(op->node, 0);
+	lpbfifo.irq = irq_of_parse_and_map(op->dev.of_node, 0);
 	if (!lpbfifo.irq)
 		return -ENODEV;
 
-	if (of_address_to_resource(op->node, 0, &res))
+	if (of_address_to_resource(op->dev.of_node, 0, &res))
 		return -ENODEV;
 	lpbfifo.regs_phys = res.start;
-	lpbfifo.regs = of_iomap(op->node, 0);
+	lpbfifo.regs = of_iomap(op->dev.of_node, 0);
 	if (!lpbfifo.regs)
 		return -ENOMEM;
 
@@ -481,6 +481,8 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
 	if (rc)
 		goto err_bcom_rx_irq;
 
+	lpbfifo.dma_irqs_enabled = 1;
+
 	/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
 	lpbfifo.bcom_tx_task =
 		bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
@@ -535,9 +537,11 @@ static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = {
 };
 
 static struct of_platform_driver mpc52xx_lpbfifo_driver = {
-	.owner = THIS_MODULE,
-	.name = "mpc52xx-lpbfifo",
-	.match_table = mpc52xx_lpbfifo_match,
+	.driver = {
+		.name = "mpc52xx-lpbfifo",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_lpbfifo_match,
+	},
 	.probe = mpc52xx_lpbfifo_probe,
 	.remove = __devexit_p(mpc52xx_lpbfifo_remove),
 };
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index a55b0b6..7672253 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -64,10 +64,19 @@ int mpc52xx_pm_prepare(void)
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	struct resource res;
 
 	/* map the whole register space */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+		of_node_put(np);
+		return -ENOSYS;
+	}
+
+	mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
 	of_node_put(np);
 	if (!mbar) {
 		pr_err("mpc52xx_pm_prepare(): could not map registers\n");
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index f9aee18..9f2e52b 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -15,6 +15,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/mdio-bitbang.h>
 #include <linux/of_mdio.h>
+#include <linux/slab.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
@@ -118,12 +119,12 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	struct device_node *node;
 	int ret;
 
-	node = of_get_parent(ofdev->node);
+	node = of_get_parent(ofdev->dev.of_node);
 	of_node_put(node);
 	if (node != ep8248e_bcsr_node)
 		return -ENODEV;
 
-	ret = of_address_to_resource(ofdev->node, 0, &res);
+	ret = of_address_to_resource(ofdev->dev.of_node, 0, &res);
 	if (ret)
 		return ret;
 
@@ -141,7 +142,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
-	ret = of_mdiobus_register(bus, ofdev->node);
+	ret = of_mdiobus_register(bus, ofdev->dev.of_node);
 	if (ret)
 		goto err_free_irq;
 
@@ -169,8 +170,9 @@ static const struct of_device_id ep8248e_mdio_match[] = {
 static struct of_platform_driver ep8248e_mdio_driver = {
 	.driver = {
 		.name = "ep8248e-mdio-bitbang",
+		.owner = THIS_MODULE,
+		.of_match_table = ep8248e_mdio_match,
 	},
-	.match_table = ep8248e_mdio_match,
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index 9d962d7..5a55d87 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/types.h>
 #include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -24,7 +25,7 @@
 
 #include "pq2.h"
 
-static DEFINE_SPINLOCK(pci_pic_lock);
+static DEFINE_RAW_SPINLOCK(pci_pic_lock);
 
 struct pq2ads_pci_pic {
 	struct device_node *node;
@@ -45,12 +46,12 @@ static void pq2ads_pci_mask_irq(unsigned int virq)
 
 	if (irq != -1) {
 		unsigned long flags;
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 
 		setbits32(&priv->regs->mask, 1 << irq);
 		mb();
 
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
@@ -62,9 +63,9 @@ static void pq2ads_pci_unmask_irq(unsigned int virq)
 	if (irq != -1) {
 		unsigned long flags;
 
-		spin_lock_irqsave(&pci_pic_lock, flags);
+		raw_spin_lock_irqsave(&pci_pic_lock, flags);
 		clrbits32(&priv->regs->mask, 1 << irq);
-		spin_unlock_irqrestore(&pci_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pci_pic_lock, flags);
 	}
 }
 
diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index 82a9bcb..d119a7c 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 0b4f883..ae525e4 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -74,6 +74,7 @@ static int __init mpc831x_rdb_probe(void)
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
 	{ .compatible = "gianfar" },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index a1908d2..e00801c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -72,6 +72,7 @@ static struct of_device_id mpc837x_ids[] = {
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 4380534..ebe6c35 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -321,7 +321,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = {
 static int pmc_probe(struct of_device *ofdev,
                      const struct of_device_id *match)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct pmc_type *type = match->data;
 	int ret = 0;
@@ -423,8 +423,11 @@ static struct of_device_id pmc_match[] = {
 };
 
 static struct of_platform_driver pmc_driver = {
-	.name = "mpc83xx-pmc",
-	.match_table = pmc_match,
+	.driver = {
+		.name = "mpc83xx-pmc",
+		.owner = THIS_MODULE,
+		.of_match_table = pmc_match,
+	},
 	.probe = pmc_probe,
 	.remove = pmc_remove
 };
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d951218..3a2ade2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -51,7 +51,7 @@ config MPC85xx_DS
 	bool "Freescale MPC85xx DS"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
@@ -60,7 +60,7 @@ config MPC85xx_RDB
 	bool "Freescale MPC85xx RDB"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select SWIOTLB
 	help
 	  This option enables support for the MPC85xx RDB (P2020 RDB) board
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 534c2ec..2ab338c 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -16,7 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -100,7 +100,7 @@ void __init corenet_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 004b7d3..f79f2f1 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -17,7 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -94,7 +94,7 @@ static void __init mpc8536_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 544011a..8190bc2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -190,7 +190,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 21f61b8..4945136 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -33,7 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  * Setup the architecture
  *
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
@@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -237,6 +245,8 @@ static void __init mpc85xx_mds_setup_arch(void)
 		} else if (machine_is(mpc8569_mds)) {
 #define BCSR7_UCC12_GETHnRST	(0x1 << 2)
 #define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+#define BCSR_UCC_RGMII		(0x1 << 6)
+#define BCSR_UCC_RTBI		(0x1 << 5)
 			/*
 			 * U-Boot mangles interrupt polarity for Marvell PHYs,
 			 * so reset built-in and UEM Marvell PHYs, this puts
@@ -247,13 +257,75 @@ static void __init mpc85xx_mds_setup_arch(void)
 
 			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+			for (np = NULL; (np = of_find_compatible_node(np,
+							"network",
+							"ucc_geth")) != NULL;) {
+				const unsigned int *prop;
+				int ucc_num;
+
+				prop = of_get_property(np, "cell-index", NULL);
+				if (prop == NULL)
+					continue;
+
+				ucc_num = *prop - 1;
+
+				prop = of_get_property(np, "phy-connection-type", NULL);
+				if (prop == NULL)
+					continue;
+
+				if (strcmp("rtbi", (const char *)prop) == 0)
+					clrsetbits_8(&bcsr_regs[7 + ucc_num],
+						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
+			}
+
+		} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+			/* Reset Micrel PHY */
+			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 		}
+
 		iounmap(bcsr_regs);
 	}
+
+	if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET           0x60
+#define MPC85xx_PMUXCR_QE0              0x00008000
+#define MPC85xx_PMUXCR_QE3              0x00001000
+#define MPC85xx_PMUXCR_QE9              0x00000040
+#define MPC85xx_PMUXCR_QE12             0x00000008
+		static __be32 __iomem *pmuxcr;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+
+		if (np) {
+			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+			if (!pmuxcr)
+				printk(KERN_EMERG "Error: Alternate function"
+					" signal multiplex control register not"
+					" mapped!\n");
+			else
+			/* P1021 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management singals in PMUXCR
+			 * register.
+			 */
+				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+						  MPC85xx_PMUXCR_QE3 |
+						  MPC85xx_PMUXCR_QE9 |
+						  MPC85xx_PMUXCR_QE12);
+
+			of_node_put(np);
+		}
+
+	}
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
@@ -302,11 +374,24 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
+	{ .compatible = "gpio-leds", },
+	{},
+};
+
+static struct of_device_id p1021_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "gianfar", },
 	{},
 };
 
 static int __init mpc85xx_publish_devices(void)
 {
+	if (machine_is(mpc8568_mds))
+		simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
@@ -315,11 +400,22 @@ static int __init mpc85xx_publish_devices(void)
 
 	return 0;
 }
+
+static int __init p1021_publish_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+	return 0;
+}
+
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -338,7 +434,8 @@ static void __init mpc85xx_mds_pic_init(void)
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -352,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void)
 		if (!np)
 			return;
 	}
-	qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 	of_node_put(np);
 #endif				/* CONFIG_QUICC_ENGINE */
 }
@@ -398,3 +499,26 @@ define_machine(mpc8569_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init p1021_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+	.name		= "P1021 MDS",
+	.probe		= p1021_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
+
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 04160a4..a15f582 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -46,6 +46,7 @@ smp_85xx_kick_cpu(int nr)
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
 	int n = 0;
+	int ioremappable;
 
 	WARN_ON (nr < 0 || nr >= NR_CPUS);
 
@@ -59,21 +60,37 @@ smp_85xx_kick_cpu(int nr)
 		return;
 	}
 
+	/*
+	 * A secondary core could be in a spinloop in the bootpage
+	 * (0xfffff000), somewhere in highmem, or somewhere in lowmem.
+	 * The bootpage and highmem can be accessed via ioremap(), but
+	 * we need to directly access the spinloop if its in lowmem.
+	 */
+	ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
+
 	/* Map the spin table */
-	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	if (ioremappable)
+		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	else
+		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
+	if (!ioremappable)
+		flush_dcache_range((ulong)bptr_vaddr,
+				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
 	local_irq_restore(flags);
 
-	iounmap(bptr_vaddr);
+	if (ioremappable)
+		iounmap(bptr_vaddr);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
index e5da5f6..d48527f 100644
--- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
+++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -50,7 +50,7 @@ static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
 
 #define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
-static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
 
 static void __iomem *socrates_fpga_pic_iobase;
 static struct irq_host *socrates_fpga_pic_irq_host;
@@ -80,9 +80,9 @@ static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
 	if (i == 3)
 		return NO_IRQ;
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
 		if (cause >> (i + 16))
 			break;
@@ -116,12 +116,12 @@ static void socrates_fpga_pic_ack(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask(unsigned int virq)
@@ -134,12 +134,12 @@ static void socrates_fpga_pic_mask(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_mask_ack(unsigned int virq)
@@ -152,13 +152,13 @@ static void socrates_fpga_pic_mask_ack(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask &= ~(1 << hwirq);
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_unmask(unsigned int virq)
@@ -171,12 +171,12 @@ static void socrates_fpga_pic_unmask(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static void socrates_fpga_pic_eoi(unsigned int virq)
@@ -189,12 +189,12 @@ static void socrates_fpga_pic_eoi(unsigned int virq)
 	hwirq = socrates_fpga_irq_to_hw(virq);
 
 	irq_line = fpga_irqs[hwirq].irq_line;
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
 		& SOCRATES_FPGA_IRQ_MASK;
 	mask |= (1 << (hwirq + 16));
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 }
 
 static int socrates_fpga_pic_set_type(unsigned int virq,
@@ -220,19 +220,19 @@ static int socrates_fpga_pic_set_type(unsigned int virq,
 	default:
 		return -EINVAL;
 	}
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
 	if (polarity)
 		mask |= (1 << hwirq);
 	else
 		mask &= ~(1 << hwirq);
 	socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 	return 0;
 }
 
 static struct irq_chip socrates_fpga_pic_chip = {
-	.name		= " FPGA-PIC ",
+	.name		= "FPGA-PIC",
 	.ack		= socrates_fpga_pic_ack,
 	.mask           = socrates_fpga_pic_mask,
 	.mask_ack       = socrates_fpga_pic_mask_ack,
@@ -314,14 +314,14 @@ void socrates_fpga_pic_init(struct device_node *pic)
 
 	socrates_fpga_pic_iobase = of_iomap(pic, 0);
 
-	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
 			SOCRATES_FPGA_IRQ_MASK << 16);
 	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
 			SOCRATES_FPGA_IRQ_MASK << 16);
-	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
 
 	pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
 }
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index f559918..bc33d18 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -134,7 +134,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
 	pvid = mfspr(SPRN_PVR);
 	svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
+	seq_printf(m, "Vendor\t\t: RPC Electronics STx\n");
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index 1b42605..0125604 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -80,8 +80,8 @@ static void xes_mpc85xx_configure_l2(void __iomem *l2_base)
 	printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
 
 	ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
-	if (machine_is_compatible("MPC8540") ||
-	    machine_is_compatible("MPC8560"))
+	if (of_machine_is_compatible("MPC8540") ||
+	    of_machine_is_compatible("MPC8560"))
 		/*
 		 * Assume L2 SRAM is used fully for cache, so set
 		 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 2bbfd53..a0b5638 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -13,7 +13,7 @@ config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	select HAS_RAPIDIO
 	select SWIOTLB
 	help
@@ -28,37 +28,37 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
-	select FSL_ULI1575
+	select FSL_ULI1575 if PCI
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
 config GEF_PPC9A
-	bool "GE Fanuc PPC9A"
+	bool "GE PPC9A"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's PPC9A.
+	  This option enables support for the GE PPC9A.
 
 config GEF_SBC310
-	bool "GE Fanuc SBC310"
+	bool "GE SBC310"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
-	  This option enables support for GE Fanuc's SBC310.
+	  This option enables support for the GE SBC310.
 
 config GEF_SBC610
-	bool "GE Fanuc SBC610"
+	bool "GE SBC610"
 	select DEFAULT_UIMAGE
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
 	help
-	  This option enables support for GE Fanuc's SBC610.
+	  This option enables support for the GE SBC610.
 
 endif
 
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b2ea887..b8cb08d 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -1,9 +1,9 @@
 /*
- * Driver for GE Fanuc's FPGA based GPIO pins
+ * Driver for GE FPGA based GPIO
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -26,6 +26,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 
 #define GEF_GPIO_DIRECT		0x00
 #define GEF_GPIO_IN		0x04
@@ -164,6 +165,6 @@ static int __init gef_gpio_init(void)
 };
 arch_initcall(gef_gpio_init);
 
-MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com");
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
 MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0110a87..6df9e25 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -1,9 +1,9 @@
 /*
- * Interrupt handling for GE Fanuc's FPGA based PIC
+ * Interrupt handling for GE FPGA based PIC
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -49,7 +49,7 @@
 #define gef_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
 
 
-static DEFINE_SPINLOCK(gef_pic_lock);
+static DEFINE_RAW_SPINLOCK(gef_pic_lock);
 
 static void __iomem *gef_pic_irq_reg_base;
 static struct irq_host *gef_pic_irq_host;
@@ -118,11 +118,11 @@ static void gef_pic_mask(unsigned int virq)
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask &= ~(1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static void gef_pic_mask_ack(unsigned int virq)
@@ -141,11 +141,11 @@ static void gef_pic_unmask(unsigned int virq)
 
 	hwirq = gef_irq_to_hw(virq);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 	mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
 	mask |= (1 << hwirq);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 }
 
 static struct irq_chip gef_pic_chip = {
@@ -199,7 +199,7 @@ void __init gef_pic_init(struct device_node *np)
 	/* Map the devices registers into memory */
 	gef_pic_irq_reg_base = of_iomap(np, 0);
 
-	spin_lock_irqsave(&gef_pic_lock, flags);
+	raw_spin_lock_irqsave(&gef_pic_lock, flags);
 
 	/* Initialise everything as masked. */
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
@@ -208,7 +208,7 @@ void __init gef_pic_init(struct device_node *np)
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
 	out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
 
-	spin_unlock_irqrestore(&gef_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
 
 	/* Map controller */
 	gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index a792e5d..60ce07e 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc PPC9A board support
+ * GE PPC9A board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
 		('A' + gef_ppc9a_get_board_rev()));
@@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
 
 define_machine(gef_ppc9a) {
-	.name			= "GE Fanuc PPC9A",
+	.name			= "GE PPC9A",
 	.probe			= gef_ppc9a_probe,
 	.setup_arch		= gef_ppc9a_setup_arch,
 	.init_IRQ		= gef_ppc9a_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 6a1a613..3ecee25 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC310 board support
+ * GE SBC310 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
@@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc310, declare_of_platform_devices);
 
 define_machine(gef_sbc310) {
-	.name			= "GE Fanuc SBC310",
+	.name			= "GE SBC310",
 	.probe			= gef_sbc310_probe,
 	.setup_arch		= gef_sbc310_setup_arch,
 	.init_IRQ		= gef_sbc310_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index e10688a..5090d60 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -1,9 +1,9 @@
 /*
- * GE Fanuc SBC610 board support
+ * GE SBC610 board support
  *
- * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ * Author: Martyn Welch <martyn.welch@ge.com>
  *
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void)
 	}
 #endif
 
-	printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
 
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
@@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m)
 {
 	uint svid = mfspr(SPRN_SVR);
 
-	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
 		('A' + gef_sbc610_get_board_rev() - 1));
@@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void)
 machine_device_initcall(gef_sbc610, declare_of_platform_devices);
 
 define_machine(gef_sbc610) {
-	.name			= "GE Fanuc SBC610",
+	.name			= "GE SBC610",
 	.probe			= gef_sbc610_probe,
 	.setup_arch		= gef_sbc610_setup_arch,
 	.init_IRQ		= gef_sbc610_init_irq,
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5abe137..018cc67 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -83,7 +83,8 @@ static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "fsl,mpc8610-immr", },
 	{ .compatible = "fsl,mpc8610-guts", },
 	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
 	{}
 };
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 2aa69a6..b11c353 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -103,7 +103,7 @@ mpc86xx_hpcn_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 242954c..60168c1 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/time.h>
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fa0f690..d361f81 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -43,7 +43,7 @@ config 40x
 	select PPC_PCI_CHOICE
 
 config 44x
-	bool "AMCC 44x"
+	bool "AMCC 44x, 46x or 47x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
@@ -144,6 +144,16 @@ config FSL_EMB_PERFMON
 	  and some e300 cores (c3 and c4).  Select this only if your
 	  core supports the Embedded Performance Monitor APU
 
+config FSL_EMB_PERF_EVENT
+	bool
+	depends on FSL_EMB_PERFMON && PERF_EVENTS && !PPC_PERF_CTRS
+	default y
+
+config FSL_EMB_PERF_EVENT_E500
+	bool
+	depends on FSL_EMB_PERF_EVENT && E500
+	default y
+
 config 4xx
 	bool
 	depends on 40x || 44x
@@ -284,7 +294,7 @@ config PPC_PERF_CTRS
          This enables the powerpc-specific perf_event back-end.
 
 config SMP
-	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE || PPC_47x
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
@@ -312,6 +322,7 @@ config NR_CPUS
 config NOT_COHERENT_CACHE
 	bool
 	depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
+	default n if PPC_47x
 	default y
 
 config CHECK_CACHE_COHERENCY
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 96fe896..6257e53 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -15,6 +15,7 @@
 #include <linux/msi.h>
 #include <linux/of_platform.h>
 #include <linux/debugfs.h>
+#include <linux/slab.h>
 
 #include <asm/dcr.h>
 #include <asm/machdep.h>
@@ -344,7 +345,7 @@ static int axon_msi_shutdown(struct of_device *device)
 static int axon_msi_probe(struct of_device *device,
 			  const struct of_device_id *device_id)
 {
-	struct device_node *dn = device->node;
+	struct device_node *dn = device->dev.of_node;
 	struct axon_msic *msic;
 	unsigned int virq;
 	int dcr_base, dcr_len;
@@ -446,11 +447,12 @@ static const struct of_device_id axon_msi_device_id[] = {
 };
 
 static struct of_platform_driver axon_msi_driver = {
-	.match_table	= axon_msi_device_id,
 	.probe		= axon_msi_probe,
 	.shutdown	= axon_msi_shutdown,
-	.driver		= {
-		.name	= "axon-msi"
+	.driver = {
+		.name = "axon-msi",
+		.owner = THIS_MODULE,
+		.of_match_table = axon_msi_device_id,
 	},
 };
 
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 35b1ec4..2516c1c 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -40,7 +40,7 @@
 #define DBG_LOW(fmt...) do { } while (0)
 #endif
 
-static DEFINE_SPINLOCK(beat_htab_lock);
+static DEFINE_RAW_SPINLOCK(beat_htab_lock);
 
 static inline unsigned int beat_read_mask(unsigned hpte_group)
 {
@@ -114,18 +114,18 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	lpar_rc = beat_read_mask(hpte_group);
 	if (lpar_rc == 0) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" full\n");
-		spin_unlock(&beat_htab_lock);
+		raw_spin_unlock(&beat_htab_lock);
 		return -1;
 	}
 
 	lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48,
 		hpte_v, hpte_r, &slot);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 
 	/*
 	 * Since we try and ioremap PHBs we don't own, the pte insert
@@ -198,17 +198,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot,
 		"avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
 		want_v & HPTE_V_AVPN, slot, psize, newpp);
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	dummy0 = beat_lpar_hpte_getword0(slot);
 	if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) {
 		DBG_LOW("not found !\n");
-		spin_unlock(&beat_htab_lock);
+		raw_spin_unlock(&beat_htab_lock);
 		return -1;
 	}
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0,
 					&dummy1);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 	if (lpar_rc != 0 || dummy0 == 0) {
 		DBG_LOW("not found !\n");
 		return -1;
@@ -262,13 +262,13 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp,
 	vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M);
 	va = (vsid << 28) | (ea & 0x0fffffff);
 
-	spin_lock(&beat_htab_lock);
+	raw_spin_lock(&beat_htab_lock);
 	slot = beat_lpar_hpte_find(va, psize);
 	BUG_ON(slot == -1);
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7,
 		&dummy0, &dummy1);
-	spin_unlock(&beat_htab_lock);
+	raw_spin_unlock(&beat_htab_lock);
 
 	BUG_ON(lpar_rc != 0);
 }
@@ -285,18 +285,18 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 		slot, va, psize, local);
 	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
 
-	spin_lock_irqsave(&beat_htab_lock, flags);
+	raw_spin_lock_irqsave(&beat_htab_lock, flags);
 	dummy1 = beat_lpar_hpte_getword0(slot);
 
 	if ((dummy1 & ~0x7FUL) != (want_v & ~0x7FUL)) {
 		DBG_LOW("not found !\n");
-		spin_unlock_irqrestore(&beat_htab_lock, flags);
+		raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
 		return;
 	}
 
 	lpar_rc = beat_write_htab_entry(0, slot, 0, 0, HPTE_V_VALID, 0,
 		&dummy1, &dummy2);
-	spin_unlock_irqrestore(&beat_htab_lock, flags);
+	raw_spin_unlock_irqrestore(&beat_htab_lock, flags);
 
 	BUG_ON(lpar_rc != 0);
 }
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 36052a9..682af97 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -30,7 +30,7 @@
 #include "beat_wrapper.h"
 
 #define	MAX_IRQS	NR_IRQS
-static DEFINE_SPINLOCK(beatic_irq_mask_lock);
+static DEFINE_RAW_SPINLOCK(beatic_irq_mask_lock);
 static uint64_t	beatic_irq_mask_enable[(MAX_IRQS+255)/64];
 static uint64_t	beatic_irq_mask_ack[(MAX_IRQS+255)/64];
 
@@ -65,30 +65,30 @@ static void beatic_mask_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_enable[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64)));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_unmask_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_enable[irq_plug/64] |= 1UL << (63 - (irq_plug%64));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_ack_irq(unsigned int irq_plug)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_ack[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64)));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static void beatic_end_irq(unsigned int irq_plug)
@@ -103,14 +103,14 @@ static void beatic_end_irq(unsigned int irq_plug)
 
 		printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
 	}
-	spin_lock_irqsave(&beatic_irq_mask_lock, flags);
+	raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags);
 	beatic_irq_mask_ack[irq_plug/64] |= 1UL << (63 - (irq_plug%64));
 	beatic_update_irq_mask(irq_plug);
-	spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
+	raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags);
 }
 
 static struct irq_chip beatic_pic = {
-	.name = " CELL-BEAT ",
+	.name = "CELL-BEAT",
 	.unmask = beatic_unmask_irq,
 	.mask = beatic_mask_irq,
 	.eoi = beatic_end_irq,
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
index e6506cd..bfa2c0c 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -118,7 +118,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cur = cbe_freqs[cur_pmode].frequency;
 
 #ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
 #endif
 
 	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
index dcddaa5..f75a4da 100644
--- a/arch/powerpc/platforms/cell/cbe_powerbutton.c
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -48,7 +48,7 @@ static int __init cbe_powerbutton_init(void)
 	int ret = 0;
 	struct input_dev *dev;
 
-	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+	if (!of_machine_is_compatible("IBM,CBPLUS-1.0")) {
 		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
 		ret = -ENODEV;
 		goto out;
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index 00eaaa7..404d1fc 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -33,6 +33,7 @@
 #include <linux/pci_regs.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 7fca09f..a881bbe 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/delay.h>
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 6829cf7..10eb1a4 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -88,7 +88,7 @@ static void iic_eoi(unsigned int irq)
 }
 
 static struct irq_chip iic_chip = {
-	.name = " CELL-IIC ",
+	.name = "CELL-IIC",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_eoi,
@@ -133,7 +133,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc)
 
 
 static struct irq_chip iic_ioexc_chip = {
-	.name = " CELL-IOEX",
+	.name = "CELL-IOEX",
 	.mask = iic_mask,
 	.unmask = iic_unmask,
 	.eoi = iic_ioexc_eoi,
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index ca5bfdf..3712900 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -28,7 +28,8 @@
 #include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/slab.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -544,7 +545,6 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
 	struct iommu_window *window;
 	struct cbe_iommu *iommu;
-	struct dev_archdata *archdata = &dev->archdata;
 
 	/* Current implementation uses the first window available in that
 	 * node's iommu. We -might- do something smarter later though it may
@@ -553,7 +553,7 @@ static struct iommu_table *cell_get_iommu_table(struct device *dev)
 	iommu = cell_iommu_for_node(dev_to_node(dev));
 	if (iommu == NULL || list_empty(&iommu->windows)) {
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
-		       archdata->of_node ? archdata->of_node->full_name : "?",
+		       dev->of_node ? dev->of_node->full_name : "?",
 		       dev_to_node(dev));
 		return NULL;
 	}
@@ -845,10 +845,10 @@ static int __init cell_iommu_init_disabled(void)
 	/* If we found a DMA window, we check if it's big enough to enclose
 	 * all of physical memory. If not, we force enable IOMMU
 	 */
-	if (np && size < lmb_end_of_DRAM()) {
+	if (np && size < memblock_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
 		       " (%ldMB) smaller than total memory (%lldMB)\n",
-		       size >> 20, lmb_end_of_DRAM() >> 20);
+		       size >> 20, memblock_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
 
@@ -896,7 +896,7 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 	const u32 *ranges = NULL;
 	int i, len, best, naddr, nsize, pna, range_size;
 
-	np = of_node_get(dev->archdata.of_node);
+	np = of_node_get(dev->of_node);
 	while (1) {
 		naddr = of_n_addr_cells(np);
 		nsize = of_n_size_cells(np);
@@ -1064,9 +1064,9 @@ static int __init cell_iommu_fixed_mapping_init(void)
 	}
 
 	fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
-	fsize = lmb_phys_mem_size();
+	fsize = memblock_phys_mem_size();
 
-	if ((fbase + fsize) <= 0x800000000)
+	if ((fbase + fsize) <= 0x800000000ul)
 		hbase = 0; /* use the device tree window */
 	else {
 		/* If we're over 32 GB we need to cheat. We can't map all of
@@ -1169,7 +1169,7 @@ static int __init cell_iommu_init(void)
 	 * Note: should we make sure we have the IOMMU actually disabled ?
 	 */
 	if (iommu_is_off ||
-	    (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+	    (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;
 
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5e0a191..1d3c4ef 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/smp.h>
 #include <linux/reboot.h>
 #include <linux/kexec.h>
@@ -255,7 +256,7 @@ static int __init cbe_sysreset_init(void)
 {
 	struct cbe_pmd_regs __iomem *regs;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0");
 	if (!sysreset_hack)
 		return 0;
 
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 5930536..50385db 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -19,7 +19,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 5122ec1..ca7731c 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -22,6 +22,7 @@
 
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 
 #include <asm/ppc-pci.h>
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 01244f2..5876e88 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -168,7 +168,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type)
 }
 
 static struct irq_chip spider_pic = {
-	.name = " SPIDER   ",
+	.name = "SPIDER",
 	.unmask = spider_unmask_irq,
 	.mask = spider_mask_irq,
 	.ack = spider_ack_irq,
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 4c506c1..f465d47 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -23,7 +23,6 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/io.h>
@@ -457,7 +456,7 @@ neighbour_spu(int cbe, struct device_node *target, struct device_node *avoid)
 			continue;
 		vic_handles = of_get_property(spu_dn, "vicinity", &lenp);
 		for (i=0; i < (lenp / sizeof(phandle)); i++) {
-			if (vic_handles[i] == target->linux_phandle)
+			if (vic_handles[i] == target->phandle)
 				return spu;
 		}
 	}
@@ -499,7 +498,7 @@ static void init_affinity_node(int cbe)
 
 			if (strcmp(name, "spe") == 0) {
 				spu = devnode_spu(cbe, vic_dn);
-				avoid_ph = last_spu_dn->linux_phandle;
+				avoid_ph = last_spu_dn->phandle;
 			} else {
 				/*
 				 * "mic-tm" and "bif0" nodes do not have
@@ -514,7 +513,7 @@ static void init_affinity_node(int cbe)
 					last_spu->has_mem_affinity = 1;
 					spu->has_mem_affinity = 1;
 				}
-				avoid_ph = vic_dn->linux_phandle;
+				avoid_ph = vic_dn->phandle;
 			}
 
 			list_add_tail(&spu->aff_list, &last_spu->aff_list);
diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index 1410443..121aec3 100644
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -22,7 +22,6 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/io.h>
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index eea1202..6cf3ec6 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -24,6 +24,7 @@
 #include <linux/file.h>
 #include <linux/fdtable.h>
 #include <linux/fs.h>
+#include <linux/gfp.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/syscalls.h>
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 64a4c2d..1a40da9 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -29,6 +29,7 @@
 #include <linux/poll.h>
 #include <linux/ptrace.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/time.h>
@@ -1848,8 +1849,7 @@ out:
 	return ret;
 }
 
-static int spufs_mfc_fsync(struct file *file, struct dentry *dentry,
-			   int datasync)
+static int spufs_mfc_fsync(struct file *file, int datasync)
 {
 	return spufs_mfc_flush(file, NULL);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index fc1b1c4..e5e5f82 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -251,7 +251,7 @@ const struct file_operations spufs_context_fops = {
 	.llseek		= dcache_dir_lseek,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
-	.fsync		= simple_sync_file,
+	.fsync		= noop_fsync,
 };
 EXPORT_SYMBOL_GPL(spufs_context_fops);
 
diff --git a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
index 0e9f325..a101abf 100644
--- a/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
+++ b/arch/powerpc/platforms/cell/spufs/lscsa_alloc.c
@@ -22,6 +22,7 @@
 
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include <asm/spu.h>
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 4678078..0b04662 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -27,6 +27,7 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/vmalloc.h>
 #include <linux/smp.h>
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index c23617c..187a7d3 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -3,6 +3,7 @@
 #include <linux/module.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 
diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c
index 8efd424..ba3588f 100644
--- a/arch/powerpc/platforms/chrp/nvram.c
+++ b/arch/powerpc/platforms/chrp/nvram.c
@@ -12,7 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 8f41685..8553cc4 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -15,7 +15,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/major.h>
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
index 57e5b60..5cdcc7c 100644
--- a/arch/powerpc/platforms/embedded6xx/wii.c
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/kexec.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <mm/mmu_decl.h>
 
 #include <asm/io.h>
@@ -65,19 +65,19 @@ static int __init page_aligned(unsigned long x)
 
 void __init wii_memory_fixups(void)
 {
-	struct lmb_property *p = lmb.memory.region;
+	struct memblock_property *p = memblock.memory.region;
 
 	/*
 	 * This is part of a workaround to allow the use of two
-	 * discontiguous RAM ranges on the Wii, even if this is
+	 * discontinuous RAM ranges on the Wii, even if this is
 	 * currently unsupported on 32-bit PowerPC Linux.
 	 *
-	 * We coealesce the two memory ranges of the Wii into a
+	 * We coalesce the two memory ranges of the Wii into a
 	 * single range, then create a reservation for the "hole"
 	 * between both ranges.
 	 */
 
-	BUG_ON(lmb.memory.cnt != 2);
+	BUG_ON(memblock.memory.cnt != 2);
 	BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
 
 	p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
@@ -92,11 +92,11 @@ void __init wii_memory_fixups(void)
 
 	p[0].size += wii_hole_size + p[1].size;
 
-	lmb.memory.cnt = 1;
-	lmb_analyze();
+	memblock.memory.cnt = 1;
+	memblock_analyze();
 
 	/* reserve the hole */
-	lmb_reserve(wii_hole_start, wii_hole_size);
+	memblock_reserve(wii_hole_start, wii_hole_size);
 
 	/* allow ioremapping the address space in the hole */
 	__allow_ioremap_reserved = 1;
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index fd23a1d..8b0c208 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -222,6 +222,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	int i;
 	u8 *dummy;
 	struct pci_bus *bus = dev->bus;
+	struct resource *res;
 	resource_size_t end = 0;
 
 	for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
@@ -230,13 +231,12 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 			end = pci_resource_end(dev, i);
 	}
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		if ((bus->resource[i]) &&
-			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			if (bus->resource[i]->end == end)
-				dummy = ioremap(bus->resource[i]->start, 0x4);
+	pci_bus_for_each_resource(bus, res, i) {
+		if (res && res->flags & IORESOURCE_MEM) {
+			if (res->end == end)
+				dummy = ioremap(res->start, 0x4);
 			else
-				dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+				dummy = ioremap(res->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 5369653..32a56c6 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -43,17 +43,14 @@ system_reset_iSeries:
 	LOAD_REG_ADDR(r23, alpaca)
 	li	r0,ALPACA_SIZE
 	sub	r23,r13,r23
-	divdu	r23,r23,r0		/* r23 has cpu number */
-	LOAD_REG_ADDR(r13, paca)
-	mulli	r0,r23,PACA_SIZE
-	add	r13,r13,r0
-	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
-	mfmsr	r24
-	ori	r24,r24,MSR_RI
-	mtmsrd	r24			/* RI on */
-	mr	r24,r23
+	divdu	r24,r23,r0		/* r24 has cpu number */
 	cmpwi	0,r24,0			/* Are we processor 0? */
 	bne	1f
+	LOAD_REG_ADDR(r13, boot_paca)
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
 	b	.__start_initialization_iSeries	/* Start up the first processor */
 1:	mfspr	r4,SPRN_CTRLF
 	li	r5,CTRL_RUNLATCH	/* Turn off the run light */
@@ -86,6 +83,16 @@ system_reset_iSeries:
 #endif
 
 2:
+	/* Load our paca now that it's been allocated */
+	LOAD_REG_ADDR(r13, paca)
+	ld	r13,0(r13)
+	mulli	r0,r24,PACA_SIZE
+	add	r13,r13,r0
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
+	mfmsr	r23
+	ori	r23,r23,MSR_RI
+	mtmsrd	r23			/* RI on */
+
 	HMT_LOW
 #ifdef CONFIG_SMP
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor
@@ -245,8 +252,8 @@ decrementer_iSeries_masked:
 	li	r11,1
 	ld	r12,PACALPPACAPTR(r13)
 	stb	r11,LPPACADECRINT(r12)
-	LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy)
-	lwz	r12,0(r12)
+	li	r12,-1
+	clrldi	r12,r12,33	/* set DEC to 0x7fffffff */
 	mtspr	SPRN_DEC,r12
 	/* fall through */
 
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 9d53cb4..ce61cea 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -29,6 +29,7 @@
 #include <linux/list.h>
 #include <linux/pci.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 
 #include <asm/iommu.h>
 #include <asm/vio.h>
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 86c4b29..ba446bf 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -273,7 +273,7 @@ static void iseries_end_IRQ(unsigned int irq)
 }
 
 static struct irq_chip iseries_pic = {
-	.name	= "iSeries irq controller",
+	.name		= "iSeries",
 	.startup	= iseries_startup_IRQ,
 	.shutdown	= iseries_shutdown_IRQ,
 	.unmask		= iseries_enable_IRQ,
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 6617915..d2c1d49 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -33,6 +33,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>
+#include <linux/slab.h>
 
 #include <asm/time.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 175aac8..ab3962b 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -27,10 +27,12 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/ratelimit.h>
 
 #include <asm/types.h>
 #include <asm/io.h>
@@ -443,7 +445,11 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	}
 
 	allocate_device_bars(pdev);
-	iseries_device_information(pdev, bus, *sub_bus);
+	if (likely(sub_bus))
+		iseries_device_information(pdev, bus, *sub_bus);
+	else
+		printk(KERN_ERR "PCI: Device node %s has missing or invalid "
+				"linux,subbus property\n", node->full_name);
 }
 
 /*
@@ -583,14 +589,9 @@ static inline struct device_node *xlate_iomm_address(
 
 	orig_addr = (unsigned long __force)addr;
 	if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory)) {
-		static unsigned long last_jiffies;
-		static int num_printed;
+		static DEFINE_RATELIMIT_STATE(ratelimit, 60 * HZ, 10);
 
-		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
-			last_jiffies = jiffies;
-			num_printed = 0;
-		}
-		if (num_printed++ < 10)
+		if (__ratelimit(&ratelimit))
 			printk(KERN_ERR
 				"iSeries_%s: invalid access at IO address %p\n",
 				func, addr);
diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c
index 91f4c6c..0676368 100644
--- a/arch/powerpc/platforms/iseries/proc.c
+++ b/arch/powerpc/platforms/iseries/proc.c
@@ -85,7 +85,7 @@ static int proc_titantod_show(struct seq_file *m, void *v)
 
 		seq_printf(m, "  titan elapsed = %lu uSec\n", titan_usec);
 		seq_printf(m, "  tb elapsed    = %lu ticks\n", tb_ticks);
-		seq_printf(m, "  titan jiffies = %lu.%04lu \n", titan_jiffies,
+		seq_printf(m, "  titan jiffies = %lu.%04lu\n", titan_jiffies,
 			   titan_jiff_rem_usec);
 		seq_printf(m, "  tb jiffies    = %lu.%04lu\n", tb_jiffies,
 			   tb_jiff_rem_usec);
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index a6cd339..b086341 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -256,7 +256,7 @@ static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
 		mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array,
 				max_entries);
 
-	printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks);
+	printk("Mainstore_VPD: numMemoryBlocks = %ld\n", mem_blocks);
 	for (i = 0; i < mem_blocks; ++i) {
 		printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n"
 		       "                             abs chunks %016lx - %016lx\n",
diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c
index 722335e..6590850 100644
--- a/arch/powerpc/platforms/iseries/smp.c
+++ b/arch/powerpc/platforms/iseries/smp.c
@@ -83,7 +83,7 @@ static void smp_iSeries_message_pass(int target, int msg)
 
 static int smp_iSeries_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return cpumask_weight(cpu_possible_mask);
 }
 
 static void smp_iSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index 2aa8b56..00b6730 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -22,7 +22,7 @@
  */
 #include <linux/of.h>
 #include <linux/init.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/proc_fs.h>
 #include <linux/module.h>
diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c
index 5aea94f..b5f05d9 100644
--- a/arch/powerpc/platforms/iseries/viopath.c
+++ b/arch/powerpc/platforms/iseries/viopath.c
@@ -29,6 +29,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/vmalloc.h>
 #include <linux/string.h>
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 0636a3d..3fff8d9 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -21,7 +21,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/string.h>
@@ -42,7 +41,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index be2527a..c16537b 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -213,7 +213,7 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	pr_debug("current astate is at %d\n",cur_astate);
 
 	policy->cur = pas_freqs[cur_astate].frequency;
-	cpumask_copy(policy->cpus, &cpu_online_map);
+	cpumask_copy(policy->cpus, cpu_online_mask);
 
 	ppc_proc_freq = policy->cur * 1000ul;
 
@@ -304,8 +304,8 @@ static struct cpufreq_driver pas_cpufreq_driver = {
 
 static int __init pas_cpufreq_init(void)
 {
-	if (!machine_is_compatible("PA6T-1682M") &&
-	    !machine_is_compatible("pasemi,pwrficient"))
+	if (!of_machine_is_compatible("PA6T-1682M") &&
+	    !of_machine_is_compatible("pasemi,pwrficient"))
 		return -ENODEV;
 
 	return cpufreq_register_driver(&pas_cpufreq_driver);
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index a6152d9..09695ae 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/of.h>
 
 #include <asm/pasemi_dma.h>
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index 3bf5467..627ee08 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
@@ -219,7 +220,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct mii_bus *new_bus;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
@@ -300,11 +301,12 @@ MODULE_DEVICE_TABLE(of, gpio_mdio_match);
 
 static struct of_platform_driver gpio_mdio_driver =
 {
-	.match_table	= gpio_mdio_match,
 	.probe		= gpio_mdio_probe,
 	.remove		= gpio_mdio_remove,
-	.driver		= {
-		.name	= "gpio-mdio-bitbang",
+	.driver = {
+		.name = "gpio-mdio-bitbang",
+		.owner = THIS_MODULE,
+		.of_match_table = gpio_mdio_match,
 	},
 };
 
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 7b1d608..1f9fb2c 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -204,7 +204,7 @@ int __init iob_init(struct device_node *dn)
 	pr_debug(" -> %s\n", __func__);
 
 	/* Allocate a spare page to map all invalid IOTLB pages. */
-	tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
+	tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
 	if (!tmp)
 		panic("IOBMAP: Cannot allocate spare page!");
 	/* Empty l1 is marked invalid */
@@ -275,7 +275,7 @@ void __init alloc_iobmap_l2(void)
 	return;
 #endif
 	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2_base = (u32 *)abs_to_virt(lmb_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
+	iob_l2_base = (u32 *)abs_to_virt(memblock_alloc_base(1UL<<21, 1UL<<21, 0x80000000));
 
 	printk(KERN_INFO "IOBMAP L2 allocated at: %p\n", iob_l2_base);
 }
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 242f809..f372ec1 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -28,6 +28,7 @@
 #include <linux/console.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
+#include <linux/gfp.h>
 
 #include <asm/prom.h>
 #include <asm/system.h>
@@ -359,10 +360,10 @@ static int pcmcia_notify(struct notifier_block *nb, unsigned long action,
 	/* We know electra_cf devices will always have of_node set, since
 	 * electra_cf is an of_platform driver.
 	 */
-	if (!parent->archdata.of_node)
+	if (!parent->of_node)
 		return 0;
 
-	if (!of_device_is_compatible(parent->archdata.of_node, "electra-cf"))
+	if (!of_device_is_compatible(parent->of_node, "electra-cf"))
 		return 0;
 
 	/* We use the direct ops for localbus */
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 9dd789a..84d7fd9 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -539,7 +539,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 		if (model
 		    && (strcmp(model, "iMac,1") == 0
 			|| strcmp(model, "PowerMac1,1") == 0)) {
-			bootx_printf("iMac,1 detected, shutting down USB \n");
+			bootx_printf("iMac,1 detected, shutting down USB\n");
 			out_le32((unsigned __iomem *)0x80880008, 1);	/* XXX */
 		}
 	}
@@ -554,7 +554,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
 	} else
 		space = bi->totalParamsSize;
 
-	bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
+	bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space);
 
 	/* New BootX will have flushed all TLBs and enters kernel with
 	 * MMU switched OFF, so this should not be useful anymore.
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 08d94e4..1e9eba1 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
-#include <linux/slab.h>
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
@@ -657,31 +656,31 @@ static int __init pmac_cpufreq_setup(void)
 	cur_freq = (*value) / 1000;
 
 	/*  Check for 7447A based MacRISC3 */
-	if (machine_is_compatible("MacRISC3") &&
+	if (of_machine_is_compatible("MacRISC3") &&
 	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
 	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
 	/* Check for other MacRISC3 machines */
-	} else if (machine_is_compatible("PowerBook3,4") ||
-		   machine_is_compatible("PowerBook3,5") ||
-		   machine_is_compatible("MacRISC3")) {
+	} else if (of_machine_is_compatible("PowerBook3,4") ||
+		   of_machine_is_compatible("PowerBook3,5") ||
+		   of_machine_is_compatible("MacRISC3")) {
 		pmac_cpufreq_init_MacRISC3(cpunode);
 	/* Else check for iBook2 500/600 */
-	} else if (machine_is_compatible("PowerBook4,1")) {
+	} else if (of_machine_is_compatible("PowerBook4,1")) {
 		hi_freq = cur_freq;
 		low_freq = 400000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 550 */
-	else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
+	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
 		hi_freq = cur_freq;
 		low_freq = 500000;
 		set_speed_proc = pmu_set_cpu_speed;
 		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 400 & 500 */
-	else if (machine_is_compatible("PowerBook3,2")) {
+	else if (of_machine_is_compatible("PowerBook3,2")) {
 		/* We only know about the 400 MHz and the 500Mhz model
 		 * they both have 300 MHz as low frequency
 		 */
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 708c751..9650c60 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 #include <linux/completion.h>
@@ -363,7 +362,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	/* secondary CPUs are tied to the primary one by the
 	 * cpufreq core if in the secondary policy we tell it that
 	 * it actually must be one policy together with all others. */
-	cpumask_copy(policy->cpus, &cpu_online_map);
+	cpumask_copy(policy->cpus, cpu_online_mask);
 	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
 
 	return cpufreq_frequency_table_cpuinfo(policy,
@@ -398,11 +397,11 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	int rc = -ENODEV;
 
 	/* Check supported platforms */
-	if (machine_is_compatible("PowerMac8,1") ||
-	    machine_is_compatible("PowerMac8,2") ||
-	    machine_is_compatible("PowerMac9,1"))
+	if (of_machine_is_compatible("PowerMac8,1") ||
+	    of_machine_is_compatible("PowerMac8,2") ||
+	    of_machine_is_compatible("PowerMac9,1"))
 		use_volts_smu = 1;
-	else if (machine_is_compatible("PowerMac11,2"))
+	else if (of_machine_is_compatible("PowerMac11,2"))
 		use_volts_vdnap = 1;
 	else
 		return -ENODEV;
@@ -729,9 +728,9 @@ static int __init g5_cpufreq_init(void)
 		return -ENODEV;
 	}
 
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		rc = g5_pm72_cpufreq_init(cpus);
 #ifdef CONFIG_PMAC_SMU
 	else
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index fbc9bbd..9e1b9fd 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -59,10 +59,10 @@ extern struct device_node *k2_skiplist[2];
  * We use a single global lock to protect accesses. Each driver has
  * to take care of its own locking
  */
-DEFINE_SPINLOCK(feature_lock);
+DEFINE_RAW_SPINLOCK(feature_lock);
 
-#define LOCK(flags)	spin_lock_irqsave(&feature_lock, flags);
-#define UNLOCK(flags)	spin_unlock_irqrestore(&feature_lock, flags);
+#define LOCK(flags)	raw_spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags)	raw_spin_unlock_irqrestore(&feature_lock, flags);
 
 
 /*
@@ -2426,7 +2426,7 @@ static int __init probe_motherboard(void)
 	    }
 	}
 	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
-	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+	    if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
 	    }
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 345e2da..06a137c 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -43,6 +43,7 @@
 #include <linux/timer.h>
 #include <linux/mutex.h>
 #include <linux/i2c.h>
+#include <linux/slab.h>
 #include <asm/keylargo.h>
 #include <asm/uninorth.h>
 #include <asm/io.h>
@@ -591,7 +592,7 @@ static void __init kw_i2c_probe(void)
 	/* Probe keywest-i2c busses */
 	for_each_compatible_node(np, "i2c","keywest-i2c") {
 		struct pmac_i2c_host_kw *host;
-		int multibus, chans, i;
+		int multibus;
 
 		/* Found one, init a host structure */
 		host = kw_i2c_host_init(np);
@@ -613,6 +614,8 @@ static void __init kw_i2c_probe(void)
 		 * parent type
 		 */
 		if (multibus) {
+			int chans, i;
+
 			parent = of_get_parent(np);
 			if (parent == NULL)
 				continue;
@@ -1257,8 +1260,7 @@ static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
 	if (inst == NULL)
 		return;
 	pmac_i2c_close(inst->bus);
-	if (inst)
-		kfree(inst);
+	kfree(inst);
 }
 
 static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index c6f0f9e..b1cdcf9 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -14,7 +14,6 @@
 #include <linux/string.h>
 #include <linux/nvram.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/adb.h>
@@ -80,7 +79,7 @@ static int is_core_99;
 static int core99_bank = 0;
 static int nvram_partitions[3];
 // XXX Turn that into a sem
-static DEFINE_SPINLOCK(nv_lock);
+static DEFINE_RAW_SPINLOCK(nv_lock);
 
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
@@ -165,10 +164,10 @@ static unsigned char indirect_nvram_read_byte(int addr)
 	unsigned char val;
 	unsigned long flags;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	out_8(nvram_addr, addr >> 5);
 	val = in_8(&nvram_data[(addr & 0x1f) << 4]);
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 
 	return val;
 }
@@ -177,10 +176,10 @@ static void indirect_nvram_write_byte(int addr, unsigned char val)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	out_8(nvram_addr, addr >> 5);
 	out_8(&nvram_data[(addr & 0x1f) << 4], val);
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 }
 
 
@@ -481,7 +480,7 @@ static void core99_nvram_sync(void)
 	if (!is_core_99 || !nvram_data || !nvram_image)
 		return;
 
-	spin_lock_irqsave(&nv_lock, flags);
+	raw_spin_lock_irqsave(&nv_lock, flags);
 	if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE,
 		NVRAM_SIZE))
 		goto bail;
@@ -503,7 +502,7 @@ static void core99_nvram_sync(void)
 		if (core99_write_bank(core99_bank, nvram_image))
 			printk("nvram: Error writing bank %d\n", core99_bank);
  bail:
-	spin_unlock_irqrestore(&nv_lock, flags);
+	raw_spin_unlock_irqrestore(&nv_lock, flags);
 
 #ifdef DEBUG
        	mdelay(2000);
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index db20de5..f5e3cda 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -50,13 +50,13 @@ static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask)
 		value = ~value;
 
 	/* Toggle the GPIO */
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = readb(addr);
 	tmp = (tmp & ~mask) | (value & mask);
 	DBG("Do write 0x%02x to GPIO %s (%p)\n",
 	    tmp, func->node->full_name, addr);
 	writeb(tmp, addr);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 
 	return 0;
 }
@@ -145,9 +145,9 @@ static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
 	struct macio_chip *macio = func->driver_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -168,9 +168,9 @@ static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask)
 	struct macio_chip *macio = func->driver_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -223,12 +223,12 @@ static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift,
 	if (args == NULL || args->count == 0)
 		return -EINVAL;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = MACIO_IN32(offset);
 	val = args->u[0].v << shift;
 	tmp = (tmp & ~mask) | (val & mask);
 	MACIO_OUT32(offset, tmp);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -243,12 +243,12 @@ static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift,
 	if (args == NULL || args->count == 0)
 		return -EINVAL;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	tmp = MACIO_IN8(offset);
 	val = args->u[0].v << shift;
 	tmp = (tmp & ~mask) | (val & mask);
 	MACIO_OUT8(offset, tmp);
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
@@ -278,12 +278,12 @@ static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&feature_lock, flags);
+	raw_spin_lock_irqsave(&feature_lock, flags);
 	/* This is fairly bogus in darwin, but it should work for our needs
 	 * implemeted that way:
 	 */
 	UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask));
-	spin_unlock_irqrestore(&feature_lock, flags);
+	raw_spin_unlock_irqrestore(&feature_lock, flags);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 96d5ce5..cec6359 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 
@@ -842,7 +843,7 @@ struct pmf_function *__pmf_find_function(struct device_node *target,
 	list_for_each_entry(func, &dev->functions, link) {
 		if (name && strcmp(name, func->name))
 			continue;
-		if (func->phandle && target->node != func->phandle)
+		if (func->phandle && target->phandle != func->phandle)
 			continue;
 		if ((func->flags & flags) == 0)
 			continue;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 09e8272..630a533 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -57,7 +57,7 @@ static int max_irqs;
 static int max_real_irqs;
 static u32 level_mask[4];
 
-static DEFINE_SPINLOCK(pmac_pic_lock);
+static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
@@ -85,7 +85,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq)
         int i = src >> 5;
         unsigned long flags;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
         if (__test_and_clear_bit(src, ppc_lost_interrupts))
                 atomic_dec(&ppc_n_lost_interrupts);
@@ -97,7 +97,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq)
                 mb();
         } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
                 != (ppc_cached_irq_mask[i] & bit));
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void pmac_ack_irq(unsigned int virq)
@@ -107,12 +107,12 @@ static void pmac_ack_irq(unsigned int virq)
         int i = src >> 5;
         unsigned long flags;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	if (__test_and_clear_bit(src, ppc_lost_interrupts))
                 atomic_dec(&ppc_n_lost_interrupts);
         out_le32(&pmac_irq_hw[i]->ack, bit);
         (void)in_le32(&pmac_irq_hw[i]->ack);
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
@@ -152,12 +152,12 @@ static unsigned int pmac_startup_irq(unsigned int virq)
         unsigned long bit = 1UL << (src & 0x1f);
         int i = src >> 5;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0)
 		out_le32(&pmac_irq_hw[i]->ack, bit);
         __set_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 0);
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 
 	return 0;
 }
@@ -167,10 +167,10 @@ static void pmac_mask_irq(unsigned int virq)
 	unsigned long flags;
 	unsigned int src = irq_map[virq].hwirq;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 1);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static void pmac_unmask_irq(unsigned int virq)
@@ -178,24 +178,24 @@ static void pmac_unmask_irq(unsigned int virq)
 	unsigned long flags;
 	unsigned int src = irq_map[virq].hwirq;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	__set_bit(src, ppc_cached_irq_mask);
         __pmac_set_irq_mask(src, 0);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
 static int pmac_retrigger(unsigned int virq)
 {
 	unsigned long flags;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	__pmac_retrigger(irq_map[virq].hwirq);
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	return 1;
 }
 
 static struct irq_chip pmac_pic = {
-	.name		= " PMAC-PIC ",
+	.name		= "PMAC-PIC",
 	.startup	= pmac_startup_irq,
 	.mask		= pmac_mask_irq,
 	.ack		= pmac_ack_irq,
@@ -210,7 +210,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 	int irq, bits;
 	int rc = IRQ_NONE;
 
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -220,12 +220,12 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
 		if (bits == 0)
 			continue;
 		irq += __ilog2(bits);
-		spin_unlock_irqrestore(&pmac_pic_lock, flags);
+		raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 		generic_handle_irq(irq);
-		spin_lock_irqsave(&pmac_pic_lock, flags);
+		raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 		rc = IRQ_HANDLED;
 	}
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	return rc;
 }
 
@@ -244,7 +244,7 @@ static unsigned int pmac_pic_get_irq(void)
 		return NO_IRQ_IGNORE;	/* ignore, already handled */
         }
 #endif /* CONFIG_SMP */
-  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	raw_spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -256,7 +256,7 @@ static unsigned int pmac_pic_get_irq(void)
 		irq += __ilog2(bits);
 		break;
 	}
-  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	raw_spin_unlock_irqrestore(&pmac_pic_lock, flags);
 	if (unlikely(irq < 0))
 		return NO_IRQ;
 	return irq_linear_revmap(pmac_pic_host, irq);
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 3362e78..f0bc08f 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -33,6 +33,8 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
+extern void pmac32_cpu_die(void);
+extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
 extern void pmac_pic_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index c205226..9deb274 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -31,7 +31,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/string.h>
@@ -52,7 +51,7 @@
 #include <linux/suspend.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -481,7 +480,7 @@ static void __init pmac_init_early(void)
 #endif
 
 	/* SMP Init has to be done early as we need to patch up
-	 * cpu_possible_map before interrupt stacks are allocated
+	 * cpu_possible_mask before interrupt stacks are allocated
 	 * or kaboom...
 	 */
 #ifdef CONFIG_SMP
@@ -620,7 +619,7 @@ static int __init pmac_probe(void)
 	 * driver needs that. We have to allocate it now. We allocate 4k
 	 * (1 small page) for now.
 	 */
-	smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL);
+	smu_cmdbuf_abs = memblock_alloc_base(4096, 4096, 0x80000000UL);
 #endif /* CONFIG_PMAC_SMU */
 
 	return 1;
@@ -647,7 +646,7 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 /* access per cpu vars from generic smp.c */
 DECLARE_PER_CPU(int, cpu_state);
 
-static void pmac_cpu_die(void)
+static void pmac64_cpu_die(void)
 {
 	/*
 	 * turn off as much as possible, we'll be
@@ -718,8 +717,13 @@ define_machine(powermac) {
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
-	.cpu_die		= pmac_cpu_die,
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PPC64
+	.cpu_die		= pmac64_cpu_die,
+#endif
+#ifdef CONFIG_PPC32
+	.cpu_die		= pmac32_cpu_die,
+#endif
 #endif
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 	.cpu_die		= generic_mach_cpu_die,
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index b40c22d..c95215f 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -53,6 +53,8 @@
 #include <asm/pmac_low_i2c.h>
 #include <asm/pmac_pfunc.h>
 
+#include "pmac.h"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -315,7 +317,7 @@ static int __init smp_psurge_probe(void)
 	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_present_map.
+	 * set their bits in cpu_present_mask.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
@@ -693,9 +695,9 @@ static void __init smp_core99_setup(int ncpus)
 #ifdef CONFIG_PPC64
 
 	/* i2c based HW sync on some G5s */
-	if (machine_is_compatible("PowerMac7,2") ||
-	    machine_is_compatible("PowerMac7,3") ||
-	    machine_is_compatible("RackMac3,1"))
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
 		smp_core99_setup_i2c_hwsync(ncpus);
 
 	/* pfunc based HW sync on recent G5s */
@@ -713,7 +715,7 @@ static void __init smp_core99_setup(int ncpus)
 #else /* CONFIG_PPC64 */
 
 	/* GPIO based HW sync on ppc32 Core99 */
-	if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+	if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
 		struct device_node *cpu;
 		const u32 *tbprop = NULL;
 
@@ -750,7 +752,7 @@ static void __init smp_core99_setup(int ncpus)
 #endif
 
 	/* 32 bits SMP can't NAP */
-	if (!machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC4"))
 		powersave_nap = 0;
 }
 
@@ -852,7 +854,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 		/* If we didn't start the second CPU, we must take
 		 * it off the bus
 		 */
-		if (machine_is_compatible("MacRISC4") &&
+		if (of_machine_is_compatible("MacRISC4") &&
 		    num_online_cpus() < 2)		
 			g5_phy_disable_cpu1();
 #endif /* CONFIG_PPC64 */
@@ -878,10 +880,9 @@ int smp_core99_cpu_disable(void)
 	return 0;
 }
 
-extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
 static int cpu_dead[NR_CPUS];
 
-void cpu_die(void)
+void pmac32_cpu_die(void)
 {
 	local_irq_disable();
 	cpu_dead[smp_processor_id()] = 1;
@@ -944,7 +945,7 @@ void __init pmac_setup_smp(void)
 	}
 #ifdef CONFIG_PPC32
 	else {
-		/* We have to set bits in cpu_possible_map here since the
+		/* We have to set bits in cpu_possible_mask here since the
 		 * secondary CPU(s) aren't in the device tree. Various
 		 * things won't be initialized for CPUs not in the possible
 		 * map, so we really need to fix it up here.
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 1810e42..48211ca 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -317,9 +317,9 @@ void __init pmac_calibrate_decr(void)
 	 * calibration. That's better since the VIA itself seems
 	 * to be slightly off. --BenH
 	 */
-	if (!machine_is_compatible("MacRISC2") &&
-	    !machine_is_compatible("MacRISC3") &&
-	    !machine_is_compatible("MacRISC4"))
+	if (!of_machine_is_compatible("MacRISC2") &&
+	    !of_machine_is_compatible("MacRISC3") &&
+	    !of_machine_is_compatible("MacRISC4"))
 		if (via_calibrate_decr())
 			return;
 
@@ -328,7 +328,7 @@ void __init pmac_calibrate_decr(void)
 	 * probably implement calibration based on the KL timer on these
 	 * machines anyway... -BenH
 	 */
-	if (machine_is_compatible("PowerMac3,5"))
+	if (of_machine_is_compatible("PowerMac3,5"))
 		if (via_calibrate_decr())
 			return;
 #endif
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 9490157..d83135a 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -132,9 +132,9 @@ void udbg_scc_init(int force_scc)
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
-	} else if (machine_is_compatible("RackMac1,1")
-		   || machine_is_compatible("RackMac1,2")
-		   || machine_is_compatible("MacRISC4")) {
+	} else if (of_machine_is_compatible("RackMac1,1")
+		   || of_machine_is_compatible("RackMac1,2")
+		   || of_machine_is_compatible("MacRISC4")) {
 		/* Xserves and G5s default to 57600 */
 		scc_inittab[1] = 0;
 		scc_inittab[3] = 0;
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index bb028f1..b341018 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/kthread.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/reboot.h>
 
 #include <asm/firmware.h>
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1e8a1e3..2c0ed87 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index e81b028..c204588 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,7 +21,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
 
 #include <asm/cell-regs.h>
 #include <asm/firmware.h>
@@ -317,8 +318,8 @@ static int __init ps3_mm_add_memory(void)
 		return result;
 	}
 
-	lmb_add(start_addr, map.r1.size);
-	lmb_analyze();
+	memblock_add(start_addr, map.r1.size);
+	memblock_analyze();
 
 	result = online_pages(start_pfn, nr_pages);
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index d6487a9..5b759b6 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,8 +24,9 @@
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 
 #include <asm/prom.h>
 
@@ -722,7 +723,7 @@ static void os_area_queue_work(void)
  * flash to a high address in the boot memory region and then puts that RAM
  * address and the byte count into the repository for retrieval by the guest.
  * We copy the data we want into a static variable and allow the memory setup
- * by the HV to be claimed by the lmb manager.
+ * by the HV to be claimed by the memblock manager.
  *
  * The os area mirror will not be available to a second stage kernel, and
  * the header verify will fail.  In this case, the saved_params values will
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index b3c6a99..39a472e 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -20,6 +20,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/mmzone.h>
 #include <linux/io.h>
 #include <linux/mm.h>
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index e34b305..23083c3 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
@@ -765,7 +766,7 @@ int ps3_system_bus_device_register(struct ps3_system_bus_device *dev)
 		BUG();
 	};
 
-	dev->core.archdata.of_node = NULL;
+	dev->core.of_node = NULL;
 	set_dev_node(&dev->core, 0);
 
 	pr_debug("%s:%d add %s\n", __func__, __LINE__, dev_name(&dev->core));
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 0ff5174..3dbef30 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -7,7 +7,7 @@ EXTRA_CFLAGS		+= -DDEBUG
 endif
 
 obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o ras.o \
+			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_XICS)	+= xics.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index a277f2e..f480386 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/kthread.h>
 #include <linux/module.h>
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 37bce52..d71e585 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -16,6 +16,7 @@
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
 #include <linux/cpu.h>
+#include <linux/slab.h>
 #include "offline_states.h"
 
 #include <asm/prom.h>
@@ -78,13 +79,12 @@ static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
 	 * prepend this to the full_name.
 	 */
 	name = (char *)ccwa + ccwa->name_offset;
-	dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL);
+	dn->full_name = kasprintf(GFP_KERNEL, "/%s", name);
 	if (!dn->full_name) {
 		kfree(dn);
 		return NULL;
 	}
 
-	sprintf(dn->full_name, "/%s", name);
 	return dn;
 }
 
@@ -409,15 +409,13 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	 * directory of the device tree.  CPUs actually live in the
 	 * cpus directory so we need to fixup the full_name.
 	 */
-	cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1,
-			   GFP_KERNEL);
+	cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name);
 	if (!cpu_name) {
 		dlpar_free_cc_nodes(dn);
 		rc = -ENOMEM;
 		goto out;
 	}
 
-	sprintf(cpu_name, "/cpus%s", dn->full_name);
 	kfree(dn->full_name);
 	dn->full_name = cpu_name;
 
@@ -432,6 +430,7 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	if (rc) {
 		dlpar_release_drc(drc_index);
 		dlpar_free_cc_nodes(dn);
+		goto out;
 	}
 
 	rc = dlpar_online_cpu(dn);
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index c5f3116..a00addb5 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/debugfs.h>
 #include <asm/smp.h>
 #include <asm/system.h>
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index ccd8dd0..34b7dc1 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -100,7 +100,7 @@ int eeh_subsystem_enabled;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
 
 /* Lock to avoid races due to multiple reports of an error */
-static DEFINE_SPINLOCK(confirm_error_lock);
+static DEFINE_RAW_SPINLOCK(confirm_error_lock);
 
 /* Buffer for reporting slot-error-detail rtas calls. Its here
  * in BSS, and not dynamically alloced, so that it ends up in
@@ -436,7 +436,7 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
 void eeh_clear_slot (struct device_node *dn, int mode_flag)
 {
 	unsigned long flags;
-	spin_lock_irqsave(&confirm_error_lock, flags);
+	raw_spin_lock_irqsave(&confirm_error_lock, flags);
 	
 	dn = find_device_pe (dn);
 	
@@ -447,7 +447,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
 	PCI_DN(dn)->eeh_mode &= ~mode_flag;
 	PCI_DN(dn)->eeh_check_count = 0;
 	__eeh_clear_slot(dn, mode_flag);
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 }
 
 /**
@@ -491,7 +491,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	    pdn->eeh_mode & EEH_MODE_NOCHECK) {
 		ignored_check++;
 		pr_debug("EEH: Ignored check (%x) for %s %s\n",
-			 pdn->eeh_mode, pci_name (dev), dn->full_name);
+			 pdn->eeh_mode, eeh_pci_name(dev), dn->full_name);
 		return 0;
 	}
 
@@ -506,7 +506,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * in one slot might report errors simultaneously, and we
 	 * only want one error recovery routine running.
 	 */
-	spin_lock_irqsave(&confirm_error_lock, flags);
+	raw_spin_lock_irqsave(&confirm_error_lock, flags);
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
@@ -515,7 +515,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
 				"location=%s driver=%s pci addr=%s\n",
 				pdn->eeh_check_count, location,
-				dev->driver->name, pci_name(dev));
+				dev->driver->name, eeh_pci_name(dev));
 			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
 				dev->driver->name);
 			dump_stack();
@@ -575,7 +575,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	 * with other functions on this device, and functions under
 	 * bridges. */
 	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 
 	eeh_send_failure_event (dn, dev);
 
@@ -586,7 +586,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	return 1;
 
 dn_unlock:
-	spin_unlock_irqrestore(&confirm_error_lock, flags);
+	raw_spin_unlock_irqrestore(&confirm_error_lock, flags);
 	return rc;
 }
 
@@ -749,7 +749,7 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn)
 	/* Determine type of EEH reset required by device,
 	 * default hot reset or fundamental reset
 	 */
-	if (dev->needs_freset)
+	if (dev && dev->needs_freset)
 		rtas_pci_slot_reset(pdn, 3);
 	else
 		rtas_pci_slot_reset(pdn, 1);
@@ -1064,7 +1064,7 @@ void __init eeh_init(void)
 	struct device_node *phb, *np;
 	struct eeh_early_enable_info info;
 
-	spin_lock_init(&confirm_error_lock);
+	raw_spin_lock_init(&confirm_error_lock);
 	spin_lock_init(&slot_errbuf_lock);
 
 	np = of_find_node_by_path("/rtas");
diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c
index ce37040..30b987b 100644
--- a/arch/powerpc/platforms/pseries/eeh_cache.c
+++ b/arch/powerpc/platforms/pseries/eeh_cache.c
@@ -23,6 +23,7 @@
 #include <linux/list.h>
 #include <linux/pci.h>
 #include <linux/rbtree.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
 #include <asm/pci-bridge.h>
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index ef8e454..b8d70f5 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -337,7 +337,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		location = location ? location : "unknown";
 		printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
 		                "for location=%s pci addr=%s\n",
-		        location, pci_name(event->dev));
+		        location, eeh_pci_name(event->dev));
 		return NULL;
 	}
 
@@ -368,7 +368,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		pci_str = pci_name (frozen_pdn->pcidev);
 		drv_str = pcid_name (frozen_pdn->pcidev);
 	} else {
-		pci_str = pci_name (event->dev);
+		pci_str = eeh_pci_name(event->dev);
 		drv_str = pcid_name (event->dev);
 	}
 	
@@ -478,9 +478,9 @@ excess_failures:
 	 * due to actual, failed cards.
 	 */
 	printk(KERN_ERR
-	   "EEH: PCI device at location=%s driver=%s pci addr=%s \n"
+	   "EEH: PCI device at location=%s driver=%s pci addr=%s\n"
 		"has failed %d times in the last hour "
-		"and has been permanently disabled. \n"
+		"and has been permanently disabled.\n"
 		"Please try reseating this device or replacing it.\n",
 		location, drv_str, pci_str, frozen_pdn->eeh_freeze_count);
 	goto perm_error;
@@ -488,7 +488,7 @@ excess_failures:
 hard_fail:
 	printk(KERN_ERR
 	   "EEH: Unable to recover from failure of PCI device "
-	   "at location=%s driver=%s pci addr=%s \n"
+	   "at location=%s driver=%s pci addr=%s\n"
 	   "Please try reseating this device or replacing it.\n",
 		location, drv_str, pci_str);
 
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index ddb80f5..2ec500c 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <asm/eeh_event.h>
 #include <asm/ppc-pci.h>
@@ -80,7 +81,7 @@ static int eeh_event_handler(void * dummy)
 	eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
 
 	printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
-	       pci_name(event->dev));
+	       eeh_pci_name(event->dev));
 
 	pdn = handle_eeh_events(event);
 
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
new file mode 100644
index 0000000..e889c9d
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2001 Dave Engebretsen IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/prom.h>
+
+#include "pseries.h"
+
+void request_event_sources_irqs(struct device_node *np,
+				irq_handler_t handler,
+				const char *name)
+{
+	int i, index, count = 0;
+	struct of_irq oirq;
+	const u32 *opicprop;
+	unsigned int opicplen;
+	unsigned int virqs[16];
+
+	/* Check for obsolete "open-pic-interrupt" property. If present, then
+	 * map those interrupts using the default interrupt host and default
+	 * trigger
+	 */
+	opicprop = of_get_property(np, "open-pic-interrupt", &opicplen);
+	if (opicprop) {
+		opicplen /= sizeof(u32);
+		for (i = 0; i < opicplen; i++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_mapping(NULL, *(opicprop++));
+			if (virqs[count] == NO_IRQ)
+				printk(KERN_ERR "Unable to allocate interrupt "
+				       "number for %s\n", np->full_name);
+			else
+				count++;
+
+		}
+	}
+	/* Else use normal interrupt tree parsing */
+	else {
+		/* First try to do a proper OF tree parsing */
+		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+		     index++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_of_mapping(oirq.controller,
+							    oirq.specifier,
+							    oirq.size);
+			if (virqs[count] == NO_IRQ)
+				printk(KERN_ERR "Unable to allocate interrupt "
+				       "number for %s\n", np->full_name);
+			else
+				count++;
+		}
+	}
+
+	/* Now request them */
+	for (i = 0; i < count; i++) {
+		if (request_irq(virqs[i], handler, 0, name, NULL)) {
+			printk(KERN_ERR "Unable to request interrupt %d for "
+			       "%s\n", virqs[i], np->full_name);
+			return;
+		}
+	}
+}
+
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 6ea4698..8f85f39 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -122,74 +122,38 @@ static void pseries_mach_cpu_die(void)
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 1;
 
-		printk(KERN_INFO
-			"cpu %u (hwid %u) ceding for offline with hint %d\n",
-			cpu, hwcpu, cede_latency_hint);
 		while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
 			extended_cede_processor(cede_latency_hint);
-			printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
-				cpu, hwcpu);
-			printk(KERN_INFO
-			"Decrementer value = %x Timebase value = %llx\n",
-			get_dec(), get_tb());
 		}
 
-		printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
-			cpu, hwcpu);
-
 		if (!get_lppaca()->shared_proc)
 			get_lppaca()->donate_dedicated_cpu = 0;
 		get_lppaca()->idle = 0;
-	}
 
-	if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
-		unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+		if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+			unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
 
-		/*
-		 * NOTE: Calling start_secondary() here for now to
-		 * start new context.
-		 * However, need to do it cleanly by resetting the
-		 * stack pointer.
-		 */
-		start_secondary();
+			/*
+			 * Call to start_secondary_resume() will not return.
+			 * Kernel stack will be reset and start_secondary()
+			 * will be called to continue the online operation.
+			 */
+			start_secondary_resume();
+		}
+	}
 
-	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+	/* Requested state is CPU_STATE_OFFLINE at this point */
+	WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE);
 
-		set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
-		unregister_slb_shadow(hard_smp_processor_id(),
-					__pa(get_slb_shadow()));
-		rtas_stop_self();
-	}
+	set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+	unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+	rtas_stop_self();
 
 	/* Should never get here... */
 	BUG();
 	for(;;);
 }
 
-static int qcss_tok;	/* query-cpu-stopped-state token */
-
-/* Get state of physical CPU.
- * Return codes:
- *	0	- The processor is in the RTAS stopped state
- *	1	- stop-self is in progress
- *	2	- The processor is not in the RTAS stopped state
- *	-1	- Hardware Error
- *	-2	- Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
-	int cpu_status, status;
-
-	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
-	if (status != 0) {
-		printk(KERN_ERR
-		       "RTAS query-cpu-stopped-state failed: %i\n", status);
-		return status;
-	}
-
-	return cpu_status;
-}
-
 static int pseries_cpu_disable(void)
 {
 	int cpu = smp_processor_id();
@@ -199,7 +163,7 @@ static int pseries_cpu_disable(void)
 
 	/*fix boot_cpuid here*/
 	if (cpu == boot_cpuid)
-		boot_cpuid = any_online_cpu(cpu_online_map);
+		boot_cpuid = cpumask_any(cpu_online_mask);
 
 	/* FIXME: abstract this to not be platform specific later on */
 	xics_migrate_irqs_away();
@@ -236,8 +200,9 @@ static void pseries_cpu_die(unsigned int cpu)
 	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
 
 		for (tries = 0; tries < 25; tries++) {
-			cpu_status = query_cpu_stopped(pcpu);
-			if (cpu_status == 0 || cpu_status == -1)
+			cpu_status = smp_query_cpu_stopped(pcpu);
+			if (cpu_status == QCSS_STOPPED ||
+			    cpu_status == QCSS_HARDWARE_ERROR)
 				break;
 			cpu_relax();
 		}
@@ -257,7 +222,7 @@ static void pseries_cpu_die(unsigned int cpu)
 }
 
 /*
- * Update cpu_present_map and paca(s) for a new cpu node.  The wrinkle
+ * Update cpu_present_mask and paca(s) for a new cpu node.  The wrinkle
  * here is that a cpu device node may represent up to two logical cpus
  * in the SMT case.  We must honor the assumption in other code that
  * the logical ids for sibling SMT threads x and y are adjacent, such
@@ -266,7 +231,7 @@ static void pseries_cpu_die(unsigned int cpu)
 static int pseries_add_processor(struct device_node *np)
 {
 	unsigned int cpu;
-	cpumask_t candidate_map, tmp = CPU_MASK_NONE;
+	cpumask_var_t candidate_mask, tmp;
 	int err = -ENOSPC, len, nthreads, i;
 	const u32 *intserv;
 
@@ -274,48 +239,53 @@ static int pseries_add_processor(struct device_node *np)
 	if (!intserv)
 		return 0;
 
+	zalloc_cpumask_var(&candidate_mask, GFP_KERNEL);
+	zalloc_cpumask_var(&tmp, GFP_KERNEL);
+
 	nthreads = len / sizeof(u32);
 	for (i = 0; i < nthreads; i++)
-		cpu_set(i, tmp);
+		cpumask_set_cpu(i, tmp);
 
 	cpu_maps_update_begin();
 
-	BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
+	BUG_ON(!cpumask_subset(cpu_present_mask, cpu_possible_mask));
 
 	/* Get a bitmap of unoccupied slots. */
-	cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
-	if (cpus_empty(candidate_map)) {
+	cpumask_xor(candidate_mask, cpu_possible_mask, cpu_present_mask);
+	if (cpumask_empty(candidate_mask)) {
 		/* If we get here, it most likely means that NR_CPUS is
 		 * less than the partition's max processors setting.
 		 */
 		printk(KERN_ERR "Cannot add cpu %s; this system configuration"
 		       " supports %d logical cpus.\n", np->full_name,
-		       cpus_weight(cpu_possible_map));
+		       cpumask_weight(cpu_possible_mask));
 		goto out_unlock;
 	}
 
-	while (!cpus_empty(tmp))
-		if (cpus_subset(tmp, candidate_map))
+	while (!cpumask_empty(tmp))
+		if (cpumask_subset(tmp, candidate_mask))
 			/* Found a range where we can insert the new cpu(s) */
 			break;
 		else
-			cpus_shift_left(tmp, tmp, nthreads);
+			cpumask_shift_left(tmp, tmp, nthreads);
 
-	if (cpus_empty(tmp)) {
-		printk(KERN_ERR "Unable to find space in cpu_present_map for"
+	if (cpumask_empty(tmp)) {
+		printk(KERN_ERR "Unable to find space in cpu_present_mask for"
 		       " processor %s with %d thread(s)\n", np->name,
 		       nthreads);
 		goto out_unlock;
 	}
 
-	for_each_cpu_mask(cpu, tmp) {
-		BUG_ON(cpu_isset(cpu, cpu_present_map));
+	for_each_cpu(cpu, tmp) {
+		BUG_ON(cpumask_test_cpu(cpu, cpu_present_mask));
 		set_cpu_present(cpu, true);
 		set_hard_smp_processor_id(cpu, *intserv++);
 	}
 	err = 0;
 out_unlock:
 	cpu_maps_update_done();
+	free_cpumask_var(candidate_mask);
+	free_cpumask_var(tmp);
 	return err;
 }
 
@@ -346,7 +316,7 @@ static void pseries_remove_processor(struct device_node *np)
 			set_hard_smp_processor_id(cpu, -1);
 			break;
 		}
-		if (cpu == NR_CPUS)
+		if (cpu >= nr_cpu_ids)
 			printk(KERN_WARNING "Could not find cpu to remove "
 			       "with physical id 0x%x\n", intserv[i]);
 	}
@@ -387,24 +357,12 @@ static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
 
 static int parse_cede_parameters(void)
 {
-	int call_status;
-
 	memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
-	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
-				NULL,
-				CEDE_LATENCY_TOKEN,
-				__pa(cede_parameters),
-				CEDE_LATENCY_PARAM_MAX_LENGTH);
-
-	if (call_status != 0)
-		printk(KERN_INFO "CEDE_LATENCY: \
-			%s %s Error calling get-system-parameter(0x%x)\n",
-			__FILE__, __func__, call_status);
-	else
-		printk(KERN_INFO "CEDE_LATENCY: \
-			get-system-parameter successful.\n");
-
-	return call_status;
+	return rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+			 NULL,
+			 CEDE_LATENCY_TOKEN,
+			 __pa(cede_parameters),
+			 CEDE_LATENCY_PARAM_MAX_LENGTH);
 }
 
 static int __init pseries_cpu_hotplug_init(void)
@@ -412,6 +370,7 @@ static int __init pseries_cpu_hotplug_init(void)
 	struct device_node *np;
 	const char *typep;
 	int cpu;
+	int qcss_tok;
 
 	for_each_node_by_name(np, "interrupt-controller") {
 		typep = of_get_property(np, "compatible", NULL);
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 9b21ee6..bc88036 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -10,13 +10,14 @@
  */
 
 #include <linux/of.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/vmalloc.h>
 #include <asm/firmware.h>
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/sparsemem.h>
 
-static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
+static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
 {
 	unsigned long start, start_pfn;
 	struct zone *zone;
@@ -25,7 +26,7 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	start_pfn = base >> PAGE_SHIFT;
 
 	if (!pfn_valid(start_pfn)) {
-		lmb_remove(base, lmb_size);
+		memblock_remove(base, memblock_size);
 		return 0;
 	}
 
@@ -40,20 +41,26 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(base, lmb_size);
+	memblock_remove(base, memblock_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
 	start = (unsigned long)__va(base);
-	ret = remove_section_mapping(start, start + lmb_size);
+	ret = remove_section_mapping(start, start + memblock_size);
+
+	/* Ensure all vmalloc mappings are flushed in case they also
+	 * hit that section of memory
+	 */
+	vm_unmap_aliases();
+
 	return ret;
 }
 
@@ -73,7 +80,7 @@ static int pseries_remove_memory(struct device_node *np)
 		return 0;
 
 	/*
-	 * Find the bae address and size of the lmb
+	 * Find the bae address and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -82,7 +89,7 @@ static int pseries_remove_memory(struct device_node *np)
 	base = *(unsigned long *)regs;
 	lmb_size = regs[3];
 
-	ret = pseries_remove_lmb(base, lmb_size);
+	ret = pseries_remove_memblock(base, lmb_size);
 	return ret;
 }
 
@@ -102,7 +109,7 @@ static int pseries_add_memory(struct device_node *np)
 		return 0;
 
 	/*
-	 * Find the base and size of the lmb
+	 * Find the base and size of the memblock
 	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
@@ -114,7 +121,7 @@ static int pseries_add_memory(struct device_node *np)
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	ret = lmb_add(base, lmb_size);
+	ret = memblock_add(base, lmb_size);
 	return (ret < 0) ? -EINVAL : 0;
 }
 
@@ -135,10 +142,10 @@ static int pseries_drconf_memory(unsigned long *base, unsigned int action)
 	}
 
 	if (action == PSERIES_DRCONF_MEM_ADD) {
-		rc = lmb_add(*base, *lmb_size);
+		rc = memblock_add(*base, *lmb_size);
 		rc = (rc < 0) ? -EINVAL : 0;
 	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
-		rc = pseries_remove_lmb(*base, *lmb_size);
+		rc = pseries_remove_memblock(*base, *lmb_size);
 	} else {
 		rc = -EINVAL;
 	}
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 383a5d0..48d2057 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -228,3 +228,41 @@ _GLOBAL(plpar_hcall9)
 	mtcrf	0xff,r0
 
 	blr				/* return r3 = status */
+
+/* See plpar_hcall_raw to see why this is needed */
+_GLOBAL(plpar_hcall9_raw)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+
+	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+
+	mr	r4,r5
+	mr	r5,r6
+	mr	r6,r7
+	mr	r7,r8
+	mr	r8,r9
+	mr	r9,r10
+	ld	r10,STK_PARM(r11)(r1)	 /* put arg7 in R10 */
+	ld	r11,STK_PARM(r12)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARM(r13)(r1)    /* put arg9 in R12 */
+
+	HVSC				/* invoke the hypervisor */
+
+	mr	r0,r12
+	ld	r12,STK_PARM(r4)(r1)
+	std	r4,  0(r12)
+	std	r5,  8(r12)
+	std	r6, 16(r12)
+	std	r7, 24(r12)
+	std	r8, 32(r12)
+	std	r9, 40(r12)
+	std	r10,48(r12)
+	std	r11,56(r12)
+	std	r0, 64(r12)
+
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 2f58c71..e19ff02 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -102,7 +102,7 @@ static const struct file_operations hcall_inst_seq_fops = {
 #define CPU_NAME_BUF_SIZE	32
 
 
-static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
+static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long *args)
 {
 	struct hcall_stats *h;
 
@@ -114,7 +114,7 @@ static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
 	h->purr_start = mfspr(SPRN_PURR);
 }
 
-static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
+static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long retval,
 			     unsigned long *retbuf)
 {
 	struct hcall_stats *h;
@@ -124,8 +124,8 @@ static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
 
 	h = &__get_cpu_var(hcall_stats)[opcode / 4];
 	h->num_calls++;
-	h->tb_total = mftb() - h->tb_start;
-	h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+	h->tb_total += mftb() - h->tb_start;
+	h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
 
 	put_cpu_var(hcall_stats);
 }
@@ -140,11 +140,11 @@ static int __init hcall_inst_init(void)
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
 		return 0;
 
-	if (register_trace_hcall_entry(probe_hcall_entry))
+	if (register_trace_hcall_entry(probe_hcall_entry, NULL))
 		return -EINVAL;
 
-	if (register_trace_hcall_exit(probe_hcall_exit)) {
-		unregister_trace_hcall_entry(probe_hcall_entry);
+	if (register_trace_hcall_exit(probe_hcall_exit, NULL)) {
+		unregister_trace_hcall_entry(probe_hcall_entry, NULL);
 		return -EINVAL;
 	}
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 1a0000a..395848e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -66,7 +66,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
 	tcep = ((u64 *)tbl->it_base) + index;
 
 	while (npages--) {
-		/* can't move this out since we might cross LMB boundary */
+		/* can't move this out since we might cross MEMBLOCK boundary */
 		rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 		*tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 
@@ -468,7 +468,7 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
 
 	pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev));
 
-	dn = dev->dev.archdata.of_node;
+	dn = dev->dev.of_node;
 
 	/* If we're the direct child of a root bus, then we need to allocate
 	 * an iommu table ourselves. The bus setup code should have setup
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 0707653..cf79b46 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -367,21 +367,28 @@ static void pSeries_lpar_hptab_clear(void)
 {
 	unsigned long size_bytes = 1UL << ppc64_pft_size;
 	unsigned long hpte_count = size_bytes >> 4;
-	unsigned long dummy1, dummy2, dword0;
+	struct {
+		unsigned long pteh;
+		unsigned long ptel;
+	} ptes[4];
 	long lpar_rc;
-	int i;
+	int i, j;
 
-	/* TODO: Use bulk call */
-	for (i = 0; i < hpte_count; i++) {
-		/* dont remove HPTEs with VRMA mappings */
-		lpar_rc = plpar_pte_remove_raw(H_ANDCOND, i, HPTE_V_1TB_SEG,
-						&dummy1, &dummy2);
-		if (lpar_rc == H_NOT_FOUND) {
-			lpar_rc = plpar_pte_read_raw(0, i, &dword0, &dummy1);
-			if (!lpar_rc && ((dword0 & HPTE_V_VRMA_MASK)
-				!= HPTE_V_VRMA_MASK))
-				/* Can be hpte for 1TB Seg. So remove it */
-				plpar_pte_remove_raw(0, i, 0, &dummy1, &dummy2);
+	/* Read in batches of 4,
+	 * invalidate only valid entries not in the VRMA
+	 * hpte_count will be a multiple of 4
+         */
+	for (i = 0; i < hpte_count; i += 4) {
+		lpar_rc = plpar_pte_read_4_raw(0, i, (void *)ptes);
+		if (lpar_rc != H_SUCCESS)
+			continue;
+		for (j = 0; j < 4; j++){
+			if ((ptes[j].pteh & HPTE_V_VRMA_MASK) ==
+				HPTE_V_VRMA_MASK)
+				continue;
+			if (ptes[j].pteh & HPTE_V_VALID)
+				plpar_pte_remove_raw(0, i + j, 0,
+					&(ptes[j].pteh), &(ptes[j].ptel));
 		}
 	}
 }
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 42f7e38..bc3c7f2 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -15,7 +15,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
 #include <asm/nvram.h>
diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h
index 22574e0..75a6f48 100644
--- a/arch/powerpc/platforms/pseries/offline_states.h
+++ b/arch/powerpc/platforms/pseries/offline_states.h
@@ -9,10 +9,31 @@ enum cpu_state_vals {
 	CPU_MAX_OFFLINE_STATES
 };
 
+#ifdef CONFIG_HOTPLUG_CPU
 extern enum cpu_state_vals get_cpu_current_state(int cpu);
 extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
-extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
 extern void set_default_offline_state(int cpu);
+#else
+static inline enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+	return CPU_STATE_ONLINE;
+}
+
+static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+}
+
+static inline void set_default_offline_state(int cpu)
+{
+}
+#endif
+
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
 extern int start_secondary(void);
+extern void start_secondary_resume(void);
 #endif
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index b6fa3e4..4b7a062 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -165,7 +165,7 @@ int remove_phb_dynamic(struct pci_controller *phb)
 	struct resource *res;
 	int rc, i;
 
-	pr_debug("PCI: Removing PHB %04x:%02x... \n",
+	pr_debug("PCI: Removing PHB %04x:%02x...\n",
 		 pci_domain_nr(b), b->number);
 
 	/* We cannot to remove a root bus that has children */
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 15eb610..6e7742d 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/kobject.h>
 #include <linux/mm.h>
@@ -150,7 +151,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
 
 	/*set cpu state and hpte states as well scratch pad area */
-	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO " CPU AREA\n");
 	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
 	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
 	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
@@ -161,7 +162,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "cpu length_copied =%llx\n",
 		ph->cpu_data.length_copied);
 
-	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO " HPTE AREA\n");
 	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
 	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
 	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
@@ -172,7 +173,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
 	printk(KERN_INFO "HPTE length_copied =%llx\n",
 		ph->hpte_data.length_copied);
 
-	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO " SRSD AREA\n");
 	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
 	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
 	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
@@ -254,12 +255,12 @@ void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
 
 /* ------------------------------------------------- */
 /**
- * release_memory_range -- release memory previously lmb_reserved
+ * release_memory_range -- release memory previously memblock_reserved
  * @start_pfn: starting physical frame number
  * @nr_pages: number of pages to free.
  *
  * This routine will release memory that had been previously
- * lmb_reserved in early boot. The released memory becomes
+ * memblock_reserved in early boot. The released memory becomes
  * available for genreal use.
  */
 static void release_memory_range(unsigned long start_pfn,
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 0603c91..d980111 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -4,6 +4,14 @@
 #include <asm/hvcall.h>
 #include <asm/page.h>
 
+/* Get state of physical CPU from query_cpu_stopped */
+int smp_query_cpu_stopped(unsigned int pcpu);
+#define QCSS_STOPPED 0
+#define QCSS_STOPPING 1
+#define QCSS_NOT_STOPPED 2
+#define QCSS_HARDWARE_ERROR -1
+#define QCSS_HARDWARE_BUSY -2
+
 static inline long poll_pending(void)
 {
 	return plpar_hcall_norets(H_POLL_PENDING);
@@ -183,6 +191,24 @@ static inline long plpar_pte_read_raw(unsigned long flags, unsigned long ptex,
 	return rc;
 }
 
+/*
+ * plpar_pte_read_4_raw can be called in real mode.
+ * ptes must be 8*sizeof(unsigned long)
+ */
+static inline long plpar_pte_read_4_raw(unsigned long flags, unsigned long ptex,
+					unsigned long *ptes)
+
+{
+	long rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9_raw(H_READ, retbuf, flags | H_READ_4, ptex);
+
+	memcpy(ptes, retbuf, 8*sizeof(unsigned long));
+
+	return rc;
+}
+
 static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex,
 		unsigned long avpn)
 {
@@ -259,12 +285,12 @@ static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr)
 	return plpar_hcall_norets(H_IPI, servernum, mfrr);
 }
 
-static inline long plpar_xirr(unsigned long *xirr_ret)
+static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr)
 {
 	long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
-	rc = plpar_hcall(H_XIRR, retbuf);
+	rc = plpar_hcall(H_XIRR, retbuf, cppr);
 
 	*xirr_ret = retbuf[0];
 
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 9e17c0d..40c93ca 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -10,6 +10,13 @@
 #ifndef _PSERIES_PSERIES_H
 #define _PSERIES_PSERIES_H
 
+#include <linux/interrupt.h>
+
+struct device_node;
+
+extern void request_event_sources_irqs(struct device_node *np,
+				       irq_handler_t handler, const char *name);
+
 extern void __init fw_feature_init(const char *hypertas, unsigned long len);
 
 struct pt_regs;
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index d20b96e..41a3e9a 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -30,7 +30,6 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/random.h>
@@ -68,63 +67,6 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id);
 static irqreturn_t ras_error_interrupt(int irq, void *dev_id);
 
 
-static void request_ras_irqs(struct device_node *np,
-			irq_handler_t handler,
-			const char *name)
-{
-	int i, index, count = 0;
-	struct of_irq oirq;
-	const u32 *opicprop;
-	unsigned int opicplen;
-	unsigned int virqs[16];
-
-	/* Check for obsolete "open-pic-interrupt" property. If present, then
-	 * map those interrupts using the default interrupt host and default
-	 * trigger
-	 */
-	opicprop = of_get_property(np, "open-pic-interrupt", &opicplen);
-	if (opicprop) {
-		opicplen /= sizeof(u32);
-		for (i = 0; i < opicplen; i++) {
-			if (count > 15)
-				break;
-			virqs[count] = irq_create_mapping(NULL, *(opicprop++));
-			if (virqs[count] == NO_IRQ)
-				printk(KERN_ERR "Unable to allocate interrupt "
-				       "number for %s\n", np->full_name);
-			else
-				count++;
-
-		}
-	}
-	/* Else use normal interrupt tree parsing */
-	else {
-		/* First try to do a proper OF tree parsing */
-		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
-		     index++) {
-			if (count > 15)
-				break;
-			virqs[count] = irq_create_of_mapping(oirq.controller,
-							    oirq.specifier,
-							    oirq.size);
-			if (virqs[count] == NO_IRQ)
-				printk(KERN_ERR "Unable to allocate interrupt "
-				       "number for %s\n", np->full_name);
-			else
-				count++;
-		}
-	}
-
-	/* Now request them */
-	for (i = 0; i < count; i++) {
-		if (request_irq(virqs[i], handler, 0, name, NULL)) {
-			printk(KERN_ERR "Unable to request interrupt %d for "
-			       "%s\n", virqs[i], np->full_name);
-			return;
-		}
-	}
-}
-
 /*
  * Initialize handlers for the set of interrupts caused by hardware errors
  * and power system events.
@@ -139,14 +81,15 @@ static int __init init_ras_IRQ(void)
 	/* Internal Errors */
 	np = of_find_node_by_path("/event-sources/internal-errors");
 	if (np != NULL) {
-		request_ras_irqs(np, ras_error_interrupt, "RAS_ERROR");
+		request_event_sources_irqs(np, ras_error_interrupt,
+					   "RAS_ERROR");
 		of_node_put(np);
 	}
 
 	/* EPOW Events */
 	np = of_find_node_by_path("/event-sources/epow-events");
 	if (np != NULL) {
-		request_ras_irqs(np, ras_epow_interrupt, "RAS_EPOW");
+		request_event_sources_irqs(np, ras_epow_interrupt, "RAS_EPOW");
 		of_node_put(np);
 	}
 
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index a2305d2..1a58637 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -15,6 +15,7 @@
 #include <linux/kref.h>
 #include <linux/notifier.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 
 #include <asm/prom.h>
 #include <asm/machdep.h>
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 1b45c45..80e9e76 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -26,6 +26,7 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 #include <asm/rtas.h>
 #include <asm/prom.h>
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ca5f2e1..a6d19e3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/major.h>
@@ -497,13 +496,14 @@ static int __init pSeries_probe(void)
 }
 
 
-DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
+DECLARE_PER_CPU(long, smt_snooze_delay);
 
 static void pseries_dedicated_idle_sleep(void)
 { 
 	unsigned int cpu = smp_processor_id();
 	unsigned long start_snooze;
 	unsigned long in_purr, out_purr;
+	long snooze = __get_cpu_var(smt_snooze_delay);
 
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -518,13 +518,12 @@ static void pseries_dedicated_idle_sleep(void)
 	 * has been checked recently.  If we should poll for a little
 	 * while, do so.
 	 */
-	if (__get_cpu_var(smt_snooze_delay)) {
-		start_snooze = get_tb() +
-			__get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec;
+	if (snooze) {
+		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
 		local_irq_enable();
 		set_thread_flag(TIF_POLLING_NRFLAG);
 
-		while (get_tb() < start_snooze) {
+		while ((snooze < 0) || (get_tb() < start_snooze)) {
 			if (need_resched() || cpu_is_offline(cpu))
 				goto out;
 			ppc64_runlatch_off();
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index b488663..3b1bf61 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -55,7 +55,29 @@
  * The Primary thread of each non-boot processor was started from the OF client
  * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
  */
-static cpumask_t of_spin_map;
+static cpumask_var_t of_spin_mask;
+
+/* Query where a cpu is now.  Return codes #defined in plpar_wrappers.h */
+int smp_query_cpu_stopped(unsigned int pcpu)
+{
+	int cpu_status, status;
+	int qcss_tok = rtas_token("query-cpu-stopped-state");
+
+	if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_INFO "Firmware doesn't support "
+				"query-cpu-stopped-state\n");
+		return QCSS_HARDWARE_ERROR;
+	}
+
+	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
+	if (status != 0) {
+		printk(KERN_ERR
+		       "RTAS query-cpu-stopped-state failed: %i\n", status);
+		return status;
+	}
+
+	return cpu_status;
+}
 
 /**
  * smp_startup_cpu() - start the given cpu
@@ -76,12 +98,18 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu)
 	unsigned int pcpu;
 	int start_cpu;
 
-	if (cpu_isset(lcpu, of_spin_map))
+	if (cpumask_test_cpu(lcpu, of_spin_mask))
 		/* Already started by OF and sitting in spin loop */
 		return 1;
 
 	pcpu = get_hard_smp_processor_id(lcpu);
 
+	/* Check to see if the CPU out of FW already for kexec */
+	if (smp_query_cpu_stopped(pcpu) == QCSS_NOT_STOPPED){
+		cpumask_set_cpu(lcpu, of_spin_mask);
+		return 1;
+	}
+
 	/* Fixup atomic count: it exited inside IRQ handler. */
 	task_thread_info(paca[lcpu].__current)->preempt_count	= 0;
 
@@ -115,7 +143,7 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 	if (firmware_has_feature(FW_FEATURE_SPLPAR))
 		vpa_init(cpu);
 
-	cpu_clear(cpu, of_spin_map);
+	cpumask_clear_cpu(cpu, of_spin_mask);
 	set_cpu_current_state(cpu, CPU_STATE_ONLINE);
 	set_default_offline_state(cpu);
 
@@ -144,8 +172,8 @@ static void __devinit smp_pSeries_kick_cpu(int nr)
 		hcpuid = get_hard_smp_processor_id(nr);
 		rc = plpar_hcall_norets(H_PROD, hcpuid);
 		if (rc != H_SUCCESS)
-			printk(KERN_ERR "Error: Prod to wake up processor %d\
-						Ret= %ld\n", nr, rc);
+			printk(KERN_ERR "Error: Prod to wake up processor %d "
+						"Ret= %ld\n", nr, rc);
 	}
 }
 
@@ -186,17 +214,19 @@ static void __init smp_init_pseries(void)
 
 	pr_debug(" -> smp_init_pSeries()\n");
 
+	alloc_bootmem_cpumask_var(&of_spin_mask);
+
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) { 
 			if (cpu_thread_in_core(i) == 0)
-				cpu_set(i, of_spin_map);
+				cpumask_set_cpu(i, of_spin_mask);
 		}
 	} else {
-		of_spin_map = cpu_present_map;
+		cpumask_copy(of_spin_mask, cpu_present_mask);
 	}
 
-	cpu_clear(boot_cpuid, of_spin_map);
+	cpumask_clear_cpu(boot_cpuid, of_spin_mask);
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index d80f193c..f19d194 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -120,14 +120,14 @@ static inline void direct_qirr_info(int n_cpu, u8 value)
 
 /* LPAR low level accessors */
 
-static inline unsigned int lpar_xirr_info_get(void)
+static inline unsigned int lpar_xirr_info_get(unsigned char cppr)
 {
 	unsigned long lpar_rc;
 	unsigned long return_value;
 
-	lpar_rc = plpar_xirr(&return_value);
+	lpar_rc = plpar_xirr(&return_value, cppr);
 	if (lpar_rc != H_SUCCESS)
-		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
+		panic(" bad return code xirr - rc = %lx\n", lpar_rc);
 	return (unsigned int)return_value;
 }
 
@@ -163,39 +163,43 @@ static inline void lpar_qirr_info(int n_cpu , u8 value)
 /* Interface to generic irq subsystem */
 
 #ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+/*
+ * For the moment we only implement delivery to all cpus or one cpu.
+ *
+ * If the requested affinity is cpu_all_mask, we set global affinity.
+ * If not we set it to the first cpu in the mask, even if multiple cpus
+ * are set. This is so things like irqbalance (which set core and package
+ * wide affinities) do the right thing.
+ */
+static int get_irq_server(unsigned int virq, const struct cpumask *cpumask,
 			  unsigned int strict_check)
 {
-	int server;
-	/* For the moment only implement delivery to all cpus or one cpu */
-	cpumask_t tmp = CPU_MASK_NONE;
 
 	if (!distribute_irqs)
 		return default_server;
 
-	if (!cpus_equal(cpumask, CPU_MASK_ALL)) {
-		cpus_and(tmp, cpu_online_map, cpumask);
-
-		server = first_cpu(tmp);
+	if (!cpumask_equal(cpumask, cpu_all_mask)) {
+		int server = cpumask_first_and(cpu_online_mask, cpumask);
 
-		if (server < NR_CPUS)
+		if (server < nr_cpu_ids)
 			return get_hard_smp_processor_id(server);
 
 		if (strict_check)
 			return -1;
 	}
 
-	if (cpus_equal(cpu_online_map, cpu_present_map))
+	/*
+	 * Workaround issue with some versions of JS20 firmware that
+	 * deliver interrupts to cpus which haven't been started. This
+	 * happens when using the maxcpus= boot option.
+	 */
+	if (cpumask_equal(cpu_online_mask, cpu_present_mask))
 		return default_distrib_server;
 
 	return default_server;
 }
 #else
-static int get_irq_server(unsigned int virq, cpumask_t cpumask,
-			  unsigned int strict_check)
-{
-	return default_server;
-}
+#define get_irq_server(virq, cpumask, strict_check) (default_server)
 #endif
 
 static void xics_unmask_irq(unsigned int virq)
@@ -211,7 +215,7 @@ static void xics_unmask_irq(unsigned int virq)
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
-	server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0);
+	server = get_irq_server(virq, irq_to_desc(virq)->affinity, 0);
 
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
 				DEFAULT_PRIORITY);
@@ -335,7 +339,8 @@ static unsigned int xics_get_irq_direct(void)
 
 static unsigned int xics_get_irq_lpar(void)
 {
-	unsigned int xirr = lpar_xirr_info_get();
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
+	unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]);
 	unsigned int vec = xics_xirr_vector(xirr);
 	unsigned int irq;
 
@@ -401,11 +406,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 		return -1;
 	}
 
-	/*
-	 * For the moment only implement delivery to all cpus or one cpu.
-	 * Get current irq_server for the given irq
-	 */
-	irq_server = get_irq_server(virq, *cpumask, 1);
+	irq_server = get_irq_server(virq, cpumask, 1);
 	if (irq_server == -1) {
 		char cpulist[128];
 		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
@@ -428,7 +429,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 }
 
 static struct irq_chip xics_pic_direct = {
-	.name = " XICS     ",
+	.name = "XICS",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -437,7 +438,7 @@ static struct irq_chip xics_pic_direct = {
 };
 
 static struct irq_chip xics_pic_lpar = {
-	.name = " XICS     ",
+	.name = "XICS",
 	.startup = xics_startup,
 	.mask = xics_mask_irq,
 	.unmask = xics_unmask_irq,
@@ -514,15 +515,13 @@ static void __init xics_init_host(void)
 /*
  * XICS only has a single IPI, so encode the messages per CPU
  */
-struct xics_ipi_struct {
-        unsigned long value;
-	} ____cacheline_aligned;
-
-static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message);
 
 static inline void smp_xics_do_message(int cpu, int msg)
 {
-	set_bit(msg, &xics_ipi_message[cpu].value);
+	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
+
+	set_bit(msg, tgt);
 	mb();
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_qirr_info(cpu, IPI_PRIORITY);
@@ -548,25 +547,23 @@ void smp_xics_message_pass(int target, int msg)
 
 static irqreturn_t xics_ipi_dispatch(int cpu)
 {
+	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
+
 	WARN_ON(cpu_is_offline(cpu));
 
 	mb();	/* order mmio clearing qirr */
-	while (xics_ipi_message[cpu].value) {
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION,
-				       &xics_ipi_message[cpu].value)) {
+	while (*tgt) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) {
 			smp_message_recv(PPC_MSG_CALL_FUNCTION);
 		}
-		if (test_and_clear_bit(PPC_MSG_RESCHEDULE,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_RESCHEDULE, tgt)) {
 			smp_message_recv(PPC_MSG_RESCHEDULE);
 		}
-		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, tgt)) {
 			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
 		}
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
-		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
-				       &xics_ipi_message[cpu].value)) {
+		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, tgt)) {
 			smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
 		}
 #endif
@@ -618,7 +615,7 @@ int __init smp_xics_probe(void)
 {
 	xics_request_ipi();
 
-	return cpus_weight(cpu_possible_map);
+	return cpumask_weight(cpu_possible_mask);
 }
 
 #endif /* CONFIG_SMP */
@@ -788,9 +785,13 @@ static void xics_set_cpu_priority(unsigned char cppr)
 {
 	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
 
-	BUG_ON(os_cppr->index != 0);
+	/*
+	 * we only really want to set the priority when there's
+	 * just one cppr value on the stack
+	 */
+	WARN_ON(os_cppr->index != 0);
 
-	os_cppr->stack[os_cppr->index] = cppr;
+	os_cppr->stack[0] = cppr;
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_cppr_info(cppr);
@@ -825,8 +826,14 @@ void xics_setup_cpu(void)
 
 void xics_teardown_cpu(void)
 {
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
 	int cpu = smp_processor_id();
 
+	/*
+	 * we have to reset the cppr index to 0 because we're
+	 * not going to return from the IPI
+	 */
+	os_cppr->index = 0;
 	xics_set_cpu_priority(0);
 
 	/* Clear any pending IPI request */
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 88f4ae7..402d221 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -185,7 +185,7 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 	axon_ram_bank_id++;
 
 	dev_info(&device->dev, "Found memory controller on %s\n",
-			device->node->full_name);
+			device->dev.of_node->full_name);
 
 	bank = kzalloc(sizeof(struct axon_ram_bank), GFP_KERNEL);
 	if (bank == NULL) {
@@ -198,7 +198,7 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 
 	bank->device = device;
 
-	if (of_address_to_resource(device->node, 0, &resource) != 0) {
+	if (of_address_to_resource(device->dev.of_node, 0, &resource) != 0) {
 		dev_err(&device->dev, "Cannot access device tree\n");
 		rc = -EFAULT;
 		goto failed;
@@ -253,7 +253,7 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 	blk_queue_logical_block_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
 	add_disk(bank->disk);
 
-	bank->irq_id = irq_of_parse_and_map(device->node, 0);
+	bank->irq_id = irq_of_parse_and_map(device->dev.of_node, 0);
 	if (bank->irq_id == NO_IRQ) {
 		dev_err(&device->dev, "Cannot access ECC interrupt ID\n");
 		rc = -EFAULT;
@@ -327,12 +327,12 @@ static struct of_device_id axon_ram_device_id[] = {
 };
 
 static struct of_platform_driver axon_ram_driver = {
-	.match_table	= axon_ram_device_id,
 	.probe		= axon_ram_probe,
 	.remove		= axon_ram_remove,
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= AXON_RAM_MODULE_NAME,
+	.driver = {
+		.name = AXON_RAM_MODULE_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = axon_ram_device_id,
 	},
 };
 
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 378ebd9..a7c5c47 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -377,7 +377,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
 	printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
 
 	/* Get the bestcomm node */
-	of_node_get(op->node);
+	of_node_get(op->dev.of_node);
 
 	/* Prepare SRAM */
 	ofn_sram = of_find_matching_node(NULL, mpc52xx_sram_ids);
@@ -406,10 +406,10 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
 	}
 
 	/* Save the node */
-	bcom_eng->ofnode = op->node;
+	bcom_eng->ofnode = op->dev.of_node;
 
 	/* Get, reserve & map io */
-	if (of_address_to_resource(op->node, 0, &res_bcom)) {
+	if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
 		printk(KERN_ERR DRIVER_NAME ": "
 			"Can't get resource\n");
 		rv = -EINVAL;
@@ -453,7 +453,7 @@ error_sramclean:
 	kfree(bcom_eng);
 	bcom_sram_cleanup();
 error_ofput:
-	of_node_put(op->node);
+	of_node_put(op->dev.of_node);
 
 	printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n");
 
@@ -494,14 +494,12 @@ MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match);
 
 
 static struct of_platform_driver mpc52xx_bcom_of_platform_driver = {
-	.owner		= THIS_MODULE,
-	.name		= DRIVER_NAME,
-	.match_table	= mpc52xx_bcom_of_match,
 	.probe		= mpc52xx_bcom_probe,
 	.remove		= mpc52xx_bcom_remove,
-	.driver		= {
-		.name	= DRIVER_NAME,
-		.owner	= THIS_MODULE,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_bcom_of_match,
 	},
 };
 
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index a4b41db..8d103ca 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -31,6 +31,7 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
+#include <linux/slab.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -77,7 +78,7 @@ static void cpm_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cpm_pic = {
-	.name = " CPM PIC ",
+	.name = "CPM PIC",
 	.mask = cpm_mask_irq,
 	.unmask = cpm_unmask_irq,
 	.eoi = cpm_end_irq,
@@ -485,9 +486,6 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 		return -EINVAL;
 	}
 
-	if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
-		shift += 3;
-
 	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
 		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
 			bits = clk_map[i][2];
@@ -502,6 +500,17 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	bits <<= shift;
 	mask <<= shift;
+
+	if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
+		if (mode == CPM_CLK_RTX) {
+			bits |= bits << 3;
+			mask |= mask << 3;
+		} else if (mode == CPM_CLK_RX) {
+			bits <<= 3;
+			mask <<= 3;
+		}
+	}
+
 	out_be32(reg, (in_be32(reg) & ~mask) | bits);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index eb59272..8dc1e24 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -244,9 +244,6 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 		return -EINVAL;
 	}
 
-	if (mode == CPM_CLK_RX)
-		shift += 3;
-
 	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
 		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
 			bits = clk_map[i][2];
@@ -259,6 +256,14 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	bits <<= shift;
 	mask <<= shift;
 
+	if (mode == CPM_CLK_RTX) {
+		bits |= bits << 3;
+		mask |= mask << 3;
+	} else if (mode == CPM_CLK_RX) {
+		bits <<= 3;
+		mask <<= 3;
+	}
+
 	out_be32(reg, (in_be32(reg) & ~mask) | bits);
 
 	cpm2_unmap(im_cpmux);
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 1709ac5..fcea4ff 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -198,7 +198,7 @@ err_sense:
 }
 
 static struct irq_chip cpm2_pic = {
-	.name = " CPM2 SIU ",
+	.name = "CPM2 SIU",
 	.mask = cpm2_mask_irq,
 	.unmask = cpm2_unmask_irq,
 	.ack = cpm2_ack,
diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h
index 30e5828..2c5f70c 100644
--- a/arch/powerpc/sysdev/cpm2_pic.h
+++ b/arch/powerpc/sysdev/cpm2_pic.h
@@ -3,6 +3,6 @@
 
 extern unsigned int cpm2_get_irq(void);
 
-extern void cpm2_pic_init(struct device_node*);
+extern void cpm2_pic_init(struct device_node *);
 
 #endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 9de72c9..88b9812 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -21,6 +21,7 @@
 #include <linux/of_device.h>
 #include <linux/spinlock.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index bafc3f8..559db2b 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -29,7 +29,6 @@
 
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
@@ -37,7 +36,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -232,7 +232,7 @@ static int __init dart_init(struct device_node *dart_node)
 	 * that to work around what looks like a problem with the HT bridge
 	 * prefetching into invalid pages and corrupting data
 	 */
-	tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+	tmp = memblock_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
 	dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
 					 DARTMAP_RPNMASK);
 
@@ -407,7 +407,7 @@ void __init alloc_dart_table(void)
 	if (iommu_is_off)
 		return;
 
-	if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
+	if (!iommu_force_on && memblock_end_of_DRAM() <= 0x40000000ull)
 		return;
 
 	/* 512 pages (2MB) is max DART tablesize. */
@@ -416,7 +416,7 @@ void __init alloc_dart_table(void)
 	 * will blow up an entire large page anyway in the kernel mapping
 	 */
 	dart_tablebase = (unsigned long)
-		abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+		abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
 
 	printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
 }
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 714ec02..eca4545 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
+#include <linux/slab.h>
 #include <asm/fsl_gtm.h>
 
 #define GTCFR_STP(x)		((x) & 1 ? 1 << 5 : 1 << 1)
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index c6e11b0..962c2d8 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
  *
  * Author: Tony Li <tony.li@freescale.com>
  *	   Jason Jin <Jason.jin@freescale.com>
@@ -16,19 +16,26 @@
 #include <linux/bootmem.h>
 #include <linux/msi.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/mpic.h>
 #include "fsl_msi.h"
 
+LIST_HEAD(msi_head);
+
 struct fsl_msi_feature {
 	u32 fsl_pic_ip;
 	u32 msiir_offset;
 };
 
-static struct fsl_msi *fsl_msi;
+struct fsl_msi_cascade_data {
+	struct fsl_msi *msi_data;
+	int index;
+};
 
 static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
 {
@@ -47,16 +54,18 @@ static struct irq_chip fsl_msi_chip = {
 	.mask		= mask_msi_irq,
 	.unmask		= unmask_msi_irq,
 	.ack		= fsl_msi_end_irq,
-	.name	= " FSL-MSI  ",
+	.name		= "FSL-MSI",
 };
 
 static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
 				irq_hw_number_t hw)
 {
+	struct fsl_msi *msi_data = h->host_data;
 	struct irq_chip *chip = &fsl_msi_chip;
 
 	irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
 
+	set_irq_chip_data(virq, msi_data);
 	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
 
 	return 0;
@@ -95,11 +104,12 @@ static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
 static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct msi_desc *entry;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
 		if (entry->irq == NO_IRQ)
 			continue;
+		msi_data = get_irq_data(entry->irq);
 		set_irq_msi(entry->irq, NULL);
 		msi_bitmap_free_hwirqs(&msi_data->bitmap,
 				       virq_to_hw(entry->irq), 1);
@@ -110,9 +120,10 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 }
 
 static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
-				  struct msi_msg *msg)
+				struct msi_msg *msg,
+				struct fsl_msi *fsl_msi_data)
 {
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data = fsl_msi_data;
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	u32 base = 0;
 
@@ -129,14 +140,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	int rc, hwirq;
+	int rc, hwirq = -ENOMEM;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+		list_for_each_entry(msi_data, &msi_head, list) {
+			hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+			if (hwirq >= 0)
+				break;
+		}
+
 		if (hwirq < 0) {
 			rc = hwirq;
 			pr_debug("%s: fail allocating msi interrupt\n",
@@ -153,25 +169,31 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 			rc = -ENOSPC;
 			goto out_free;
 		}
+		set_irq_data(virq, msi_data);
 		set_irq_msi(virq, entry);
 
-		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
 		write_msi_msg(virq, &msg);
 	}
 	return 0;
 
 out_free:
+	/* free by the caller of this function */
 	return rc;
 }
 
 static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 	int msir_index = -1;
 	u32 msir_value = 0;
 	u32 intr_index;
 	u32 have_shift = 0;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq);
+	msi_data = cascade_data->msi_data;
 
 	raw_spin_lock(&desc->lock);
 	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
@@ -186,13 +208,13 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	if (unlikely(desc->status & IRQ_INPROGRESS))
 		goto unlock;
 
-	msir_index = (int)desc->handler_data;
+	msir_index = cascade_data->index;
 
 	if (msir_index >= NR_MSI_REG)
 		cascade_irq = NO_IRQ;
 
 	desc->status |= IRQ_INPROGRESS;
-	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
 	case FSL_PIC_IP_MPIC:
 		msir_value = fsl_msi_read(msi_data->msi_regs,
 			msir_index * 0x10);
@@ -228,6 +250,30 @@ unlock:
 	raw_spin_unlock(&desc->lock);
 }
 
+static int fsl_of_msi_remove(struct of_device *ofdev)
+{
+	struct fsl_msi *msi = ofdev->dev.platform_data;
+	int virq, i;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	if (msi->list.prev != NULL)
+		list_del(&msi->list);
+	for (i = 0; i < NR_MSI_REG; i++) {
+		virq = msi->msi_virqs[i];
+		if (virq != NO_IRQ) {
+			cascade_data = get_irq_data(virq);
+			kfree(cascade_data);
+			irq_dispose_mapping(virq);
+		}
+	}
+	if (msi->bitmap.bitmap)
+		msi_bitmap_free(&msi->bitmap);
+	iounmap(msi->msi_regs);
+	kfree(msi);
+
+	return 0;
+}
+
 static int __devinit fsl_of_msi_probe(struct of_device *dev,
 				const struct of_device_id *match)
 {
@@ -238,17 +284,20 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 	int virt_msir;
 	const u32 *p;
 	struct fsl_msi_feature *features = match->data;
+	struct fsl_msi_cascade_data *cascade_data = NULL;
+	int len;
+	u32 offset;
 
 	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
 
 	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
 	if (!msi) {
 		dev_err(&dev->dev, "No memory for MSI structure\n");
-		err = -ENOMEM;
-		goto error_out;
+		return -ENOMEM;
 	}
+	dev->dev.platform_data = msi;
 
-	msi->irqhost = irq_alloc_host(dev->node, IRQ_HOST_MAP_LINEAR,
+	msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
 				      NR_MSI_IRQS, &fsl_msi_host_ops, 0);
 
 	if (msi->irqhost == NULL) {
@@ -258,10 +307,10 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 	}
 
 	/* Get the MSI reg base */
-	err = of_address_to_resource(dev->node, 0, &res);
+	err = of_address_to_resource(dev->dev.of_node, 0, &res);
 	if (err) {
 		dev_err(&dev->dev, "%s resource error!\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 		goto error_out;
 	}
 
@@ -284,40 +333,60 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
 		goto error_out;
 	}
 
-	p = of_get_property(dev->node, "interrupts", &count);
+	p = of_get_property(dev->dev.of_node, "interrupts", &count);
 	if (!p) {
 		dev_err(&dev->dev, "no interrupts property found on %s\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 		err = -ENODEV;
 		goto error_out;
 	}
 	if (count % 8 != 0) {
 		dev_err(&dev->dev, "Malformed interrupts property on %s\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 		err = -EINVAL;
 		goto error_out;
 	}
+	offset = 0;
+	p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
+	if (p)
+		offset = *p / IRQS_PER_MSI_REG;
 
 	count /= sizeof(u32);
-	for (i = 0; i < count / 2; i++) {
-		if (i > NR_MSI_REG)
-			break;
-		virt_msir = irq_of_parse_and_map(dev->node, i);
+	for (i = 0; i < min(count / 2, NR_MSI_REG); i++) {
+		virt_msir = irq_of_parse_and_map(dev->dev.of_node, i);
 		if (virt_msir != NO_IRQ) {
-			set_irq_data(virt_msir, (void *)i);
+			cascade_data = kzalloc(
+					sizeof(struct fsl_msi_cascade_data),
+					GFP_KERNEL);
+			if (!cascade_data) {
+				dev_err(&dev->dev,
+					"No memory for MSI cascade data\n");
+				err = -ENOMEM;
+				goto error_out;
+			}
+			msi->msi_virqs[i] = virt_msir;
+			cascade_data->index = i + offset;
+			cascade_data->msi_data = msi;
+			set_irq_data(virt_msir, (void *)cascade_data);
 			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
 		}
 	}
 
-	fsl_msi = msi;
+	list_add_tail(&msi->list, &msi_head);
 
-	WARN_ON(ppc_md.setup_msi_irqs);
-	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
-	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
-	ppc_md.msi_check_device = fsl_msi_check_device;
+	/* The multiple setting ppc_md.setup_msi_irqs will not harm things */
+	if (!ppc_md.setup_msi_irqs) {
+		ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+		ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+		ppc_md.msi_check_device = fsl_msi_check_device;
+	} else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
+		dev_err(&dev->dev, "Different MSI driver already installed!\n");
+		err = -ENODEV;
+		goto error_out;
+	}
 	return 0;
 error_out:
-	kfree(msi);
+	fsl_of_msi_remove(dev);
 	return err;
 }
 
@@ -344,9 +413,13 @@ static const struct of_device_id fsl_of_msi_ids[] = {
 };
 
 static struct of_platform_driver fsl_of_msi_driver = {
-	.name = "fsl-msi",
-	.match_table = fsl_of_msi_ids,
+	.driver = {
+		.name = "fsl-msi",
+		.owner = THIS_MODULE,
+		.of_match_table = fsl_of_msi_ids,
+	},
 	.probe = fsl_of_msi_probe,
+	.remove = fsl_of_msi_remove,
 };
 
 static __init int fsl_of_msi_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 331c7e7..624580c 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -32,8 +32,11 @@ struct fsl_msi {
 	u32 msi_addr_hi;
 	void __iomem *msi_regs;
 	u32 feature;
+	int msi_virqs[NR_MSI_REG];
 
 	struct msi_bitmap bitmap;
+
+	struct list_head list;          /* support multiple MSI banks */
 };
 
 #endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index e1a028c..356c6a0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,8 +23,9 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -189,7 +190,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
 
 	/* Setup inbound mem window */
-	mem = lmb_end_of_DRAM();
+	mem = memblock_end_of_DRAM();
 	sz = min(mem, paddr_lo);
 	mem_log = __ilog2_u64(sz);
 
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index a7635a9..9082eb9 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -60,7 +60,7 @@ static struct platform_suspend_ops pmc_suspend_ops = {
 
 static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
 {
-	pmc_regs = of_iomap(ofdev->node, 0);
+	pmc_regs = of_iomap(ofdev->dev.of_node, 0);
 	if (!pmc_regs)
 		return -ENOMEM;
 
@@ -76,8 +76,11 @@ static const struct of_device_id pmc_ids[] = {
 };
 
 static struct of_platform_driver pmc_driver = {
-	.driver.name = "fsl-pmc",
-	.match_table = pmc_ids,
+	.driver = {
+		.name = "fsl-pmc",
+		.owner = THIS_MODULE,
+		.of_match_table = pmc_ids,
+	},
 	.probe = pmc_probe,
 };
 
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 757a83f..30e1626 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,6 +1,15 @@
 /*
  * Freescale MPC85xx/MPC86xx RapidIO support
  *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
  * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
  * Zhang Wei <wei.zhang@freescale.com>
  *
@@ -23,19 +32,31 @@
 #include <linux/rio_drv.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/kfifo.h>
 
 #include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG_PW	/* Port-Write debugging */
 
 /* RapidIO definition irq, which read from OF-tree */
 #define IRQ_RIO_BELL(m)		(((struct rio_priv *)(m->priv))->bellirq)
 #define IRQ_RIO_TX(m)		(((struct rio_priv *)(m->priv))->txirq)
 #define IRQ_RIO_RX(m)		(((struct rio_priv *)(m->priv))->rxirq)
+#define IRQ_RIO_PW(m)		(((struct rio_priv *)(m->priv))->pwirq)
 
 #define RIO_ATMU_REGS_OFFSET	0x10c00
 #define RIO_P_MSG_REGS_OFFSET	0x11000
 #define RIO_S_MSG_REGS_OFFSET	0x13000
 #define RIO_ESCSR		0x158
 #define RIO_CCSR		0x15c
+#define RIO_LTLEDCSR		0x0608
+#define  RIO_LTLEDCSR_IER	0x80000000
+#define  RIO_LTLEDCSR_PRT	0x01000000
+#define RIO_LTLEECSR		0x060c
+#define RIO_EPWISR		0x10010
 #define RIO_ISR_AACR		0x10120
 #define RIO_ISR_AACR_AA		0x1	/* Accept All ID */
 #define RIO_MAINT_WIN_SIZE	0x400000
@@ -54,6 +75,18 @@
 #define RIO_MSG_ISR_QFI		0x00000010
 #define RIO_MSG_ISR_DIQI	0x00000001
 
+#define RIO_IPWMR_SEN		0x00100000
+#define RIO_IPWMR_QFIE		0x00000100
+#define RIO_IPWMR_EIE		0x00000020
+#define RIO_IPWMR_CQ		0x00000002
+#define RIO_IPWMR_PWE		0x00000001
+
+#define RIO_IPWSR_QF		0x00100000
+#define RIO_IPWSR_TE		0x00000080
+#define RIO_IPWSR_QFI		0x00000010
+#define RIO_IPWSR_PWD		0x00000008
+#define RIO_IPWSR_PWB		0x00000004
+
 #define RIO_MSG_DESC_SIZE	32
 #define RIO_MSG_BUFFER_SIZE	4096
 #define RIO_MIN_TX_RING_SIZE	2
@@ -120,7 +153,7 @@ struct rio_msg_regs {
 	u32 pad10[26];
 	u32 pwmr;
 	u32 pwsr;
-	u32 pad11;
+	u32 epwqbar;
 	u32 pwqbar;
 };
 
@@ -159,6 +192,14 @@ struct rio_msg_rx_ring {
 	void *dev_id;
 };
 
+struct rio_port_write_msg {
+	void *virt;
+	dma_addr_t phys;
+	u32 msg_count;
+	u32 err_count;
+	u32 discard_count;
+};
+
 struct rio_priv {
 	struct device *dev;
 	void __iomem *regs_win;
@@ -171,11 +212,64 @@ struct rio_priv {
 	struct rio_dbell_ring dbell_ring;
 	struct rio_msg_tx_ring msg_tx_ring;
 	struct rio_msg_rx_ring msg_rx_ring;
+	struct rio_port_write_msg port_write_msg;
 	int bellirq;
 	int txirq;
 	int rxirq;
+	int pwirq;
+	struct work_struct pw_work;
+	struct kfifo pw_fifo;
+	spinlock_t pw_fifo_lock;
 };
 
+#define __fsl_read_rio_config(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)\n"		\
+		"	eieio\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %1,-1\n"			\
+		"	li %0,%3\n"			\
+		"	b 2b\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,3b\n"			\
+		".text"					\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+static void __iomem *rio_regs_win;
+
+static int (*saved_mcheck_exception)(struct pt_regs *regs);
+
+static int fsl_rio_mcheck_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *entry = NULL;
+	unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK);
+
+	if (reason & MCSR_BUS_RBERR) {
+		reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+		if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+			/* Check if we are prepared to handle this fault */
+			entry = search_exception_tables(regs->nip);
+			if (entry) {
+				pr_debug("RIO: %s - MC Exception handled\n",
+					 __func__);
+				out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+					 0);
+				regs->msr |= MSR_RI;
+				regs->nip = entry->fixup;
+				return 1;
+			}
+		}
+	}
+
+	if (saved_mcheck_exception)
+		return saved_mcheck_exception(regs);
+	else
+		return cur_cpu_spec->machine_check(regs);
+}
+
 /**
  * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
  * @mport: RapidIO master port info
@@ -276,27 +370,44 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
 {
 	struct rio_priv *priv = mport->priv;
 	u8 *data;
+	u32 rval, err = 0;
 
 	pr_debug
 	    ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
 	     index, destid, hopcount, offset, len);
+
+	/* 16MB maintenance window possible */
+	/* allow only aligned access to maintenance registers */
+	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+		return -EINVAL;
+
 	out_be32(&priv->maint_atmu_regs->rowtar,
-		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+		 (destid << 22) | (hopcount << 12) | (offset >> 12));
+	out_be32(&priv->maint_atmu_regs->rowtear,  (destid >> 10));
 
-	data = (u8 *) priv->maint_win + offset;
+	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 	switch (len) {
 	case 1:
-		*val = in_8((u8 *) data);
+		__fsl_read_rio_config(rval, data, err, "lbz");
 		break;
 	case 2:
-		*val = in_be16((u16 *) data);
+		__fsl_read_rio_config(rval, data, err, "lhz");
 		break;
-	default:
-		*val = in_be32((u32 *) data);
+	case 4:
+		__fsl_read_rio_config(rval, data, err, "lwz");
 		break;
+	default:
+		return -EINVAL;
 	}
 
-	return 0;
+	if (err) {
+		pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
+			 err, destid, hopcount, offset);
+	}
+
+	*val = rval;
+
+	return err;
 }
 
 /**
@@ -321,10 +432,17 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 	pr_debug
 	    ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
 	     index, destid, hopcount, offset, len, val);
+
+	/* 16MB maintenance windows possible */
+	/* allow only aligned access to maintenance registers */
+	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
+		return -EINVAL;
+
 	out_be32(&priv->maint_atmu_regs->rowtar,
-		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+		 (destid << 22) | (hopcount << 12) | (offset >> 12));
+	out_be32(&priv->maint_atmu_regs->rowtear,  (destid >> 10));
 
-	data = (u8 *) priv->maint_win + offset;
+	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
 	switch (len) {
 	case 1:
 		out_8((u8 *) data, val);
@@ -332,9 +450,11 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
 	case 2:
 		out_be16((u16 *) data, val);
 		break;
-	default:
+	case 4:
 		out_be32((u32 *) data, val);
 		break;
+	default:
+		return -EINVAL;
 	}
 
 	return 0;
@@ -929,6 +1049,223 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport)
 	return rc;
 }
 
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+	u32 ipwmr, ipwsr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+	struct rio_priv *priv = port->priv;
+	u32 epwisr, tmp;
+
+	ipwmr = in_be32(&priv->msg_regs->pwmr);
+	ipwsr = in_be32(&priv->msg_regs->pwsr);
+
+	epwisr = in_be32(priv->regs_win + RIO_EPWISR);
+	if (epwisr & 0x80000000) {
+		tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+		pr_info("RIO_LTLEDCSR = 0x%x\n", tmp);
+		out_be32(priv->regs_win + RIO_LTLEDCSR, 0);
+	}
+
+	if (!(epwisr & 0x00000001))
+		return IRQ_HANDLED;
+
+#ifdef DEBUG_PW
+	pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+	if (ipwsr & RIO_IPWSR_QF)
+		pr_debug(" QF");
+	if (ipwsr & RIO_IPWSR_TE)
+		pr_debug(" TE");
+	if (ipwsr & RIO_IPWSR_QFI)
+		pr_debug(" QFI");
+	if (ipwsr & RIO_IPWSR_PWD)
+		pr_debug(" PWD");
+	if (ipwsr & RIO_IPWSR_PWB)
+		pr_debug(" PWB");
+	pr_debug(" )\n");
+#endif
+	out_be32(&priv->msg_regs->pwsr,
+		 ipwsr & (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+	if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+		priv->port_write_msg.err_count++;
+		pr_info("RIO: Port-Write Transaction Err (%d)\n",
+			 priv->port_write_msg.err_count);
+	}
+	if (ipwsr & RIO_IPWSR_PWD) {
+		priv->port_write_msg.discard_count++;
+		pr_info("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+			 priv->port_write_msg.discard_count);
+	}
+
+	/* Schedule deferred processing if PW was received */
+	if (ipwsr & RIO_IPWSR_QFI) {
+		/* Save PW message (if there is room in FIFO),
+		 * otherwise discard it.
+		 */
+		if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
+			priv->port_write_msg.msg_count++;
+			kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
+				 RIO_PW_MSG_SIZE);
+		} else {
+			priv->port_write_msg.discard_count++;
+			pr_info("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+				 priv->port_write_msg.discard_count);
+		}
+		schedule_work(&priv->pw_work);
+	}
+
+	/* Issue Clear Queue command. This allows another
+	 * port-write to be received.
+	 */
+	out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+	return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+	struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
+	unsigned long flags;
+	u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+	/*
+	 * Process port-write messages
+	 */
+	spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+	while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
+			 RIO_PW_MSG_SIZE)) {
+		/* Process one message */
+		spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+#ifdef DEBUG_PW
+		{
+		u32 i;
+		pr_debug("%s : Port-Write Message:", __func__);
+		for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+			if ((i%4) == 0)
+				pr_debug("\n0x%02x: 0x%08x", i*4,
+					 msg_buffer[i]);
+			else
+				pr_debug(" 0x%08x", msg_buffer[i]);
+		}
+		pr_debug("\n");
+		}
+#endif
+		/* Pass the port-write message to RIO core for processing */
+		rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+		spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+	}
+	spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable:    1=enable; 0=disable port-write message handling
+ */
+static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+	struct rio_priv *priv = mport->priv;
+	u32 rval;
+
+	rval = in_be32(&priv->msg_regs->pwmr);
+
+	if (enable)
+		rval |= RIO_IPWMR_PWE;
+	else
+		rval &= ~RIO_IPWMR_PWE;
+
+	out_be32(&priv->msg_regs->pwmr, rval);
+
+	return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_port_write_init(struct rio_mport *mport)
+{
+	struct rio_priv *priv = mport->priv;
+	int rc = 0;
+
+	/* Following configurations require a disabled port write controller */
+	out_be32(&priv->msg_regs->pwmr,
+		 in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+	/* Initialize port write */
+	priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
+					RIO_PW_MSG_SIZE,
+					&priv->port_write_msg.phys, GFP_KERNEL);
+	if (!priv->port_write_msg.virt) {
+		pr_err("RIO: unable allocate port write queue\n");
+		return -ENOMEM;
+	}
+
+	priv->port_write_msg.err_count = 0;
+	priv->port_write_msg.discard_count = 0;
+
+	/* Point dequeue/enqueue pointers at first entry */
+	out_be32(&priv->msg_regs->epwqbar, 0);
+	out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
+
+	pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+		 in_be32(&priv->msg_regs->epwqbar),
+		 in_be32(&priv->msg_regs->pwqbar));
+
+	/* Clear interrupt status IPWSR */
+	out_be32(&priv->msg_regs->pwsr,
+		 (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+	/* Configure port write contoller for snooping enable all reporting,
+	   clear queue full */
+	out_be32(&priv->msg_regs->pwmr,
+		 RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+	/* Hook up port-write handler */
+	rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0,
+			 "port-write", (void *)mport);
+	if (rc < 0) {
+		pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+		goto err_out;
+	}
+
+	INIT_WORK(&priv->pw_work, fsl_pw_dpc);
+	spin_lock_init(&priv->pw_fifo_lock);
+	if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+		pr_err("FIFO allocation failed\n");
+		rc = -ENOMEM;
+		goto err_out_irq;
+	}
+
+	pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+		 in_be32(&priv->msg_regs->pwmr),
+		 in_be32(&priv->msg_regs->pwsr));
+
+	return rc;
+
+err_out_irq:
+	free_irq(IRQ_RIO_PW(mport), (void *)mport);
+err_out:
+	dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
+			  priv->port_write_msg.virt,
+			  priv->port_write_msg.phys);
+	return rc;
+}
+
 static char *cmdline = NULL;
 
 static int fsl_rio_get_hdid(int index)
@@ -1014,41 +1351,41 @@ int fsl_rio_setup(struct of_device *dev)
 	u64 law_start, law_size;
 	int paw, aw, sw;
 
-	if (!dev->node) {
+	if (!dev->dev.of_node) {
 		dev_err(&dev->dev, "Device OF-Node is NULL");
 		return -EFAULT;
 	}
 
-	rc = of_address_to_resource(dev->node, 0, &regs);
+	rc = of_address_to_resource(dev->dev.of_node, 0, &regs);
 	if (rc) {
 		dev_err(&dev->dev, "Can't get %s property 'reg'\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 		return -EFAULT;
 	}
-	dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
+	dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
 	dev_info(&dev->dev, "Regs: %pR\n", &regs);
 
-	dt_range = of_get_property(dev->node, "ranges", &rlen);
+	dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
 	if (!dt_range) {
 		dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
-				dev->node->full_name);
+				dev->dev.of_node->full_name);
 		return -EFAULT;
 	}
 
 	/* Get node address wide */
-	cell = of_get_property(dev->node, "#address-cells", NULL);
+	cell = of_get_property(dev->dev.of_node, "#address-cells", NULL);
 	if (cell)
 		aw = *cell;
 	else
-		aw = of_n_addr_cells(dev->node);
+		aw = of_n_addr_cells(dev->dev.of_node);
 	/* Get node size wide */
-	cell = of_get_property(dev->node, "#size-cells", NULL);
+	cell = of_get_property(dev->dev.of_node, "#size-cells", NULL);
 	if (cell)
 		sw = *cell;
 	else
-		sw = of_n_size_cells(dev->node);
+		sw = of_n_size_cells(dev->dev.of_node);
 	/* Get parent address wide wide */
-	paw = of_n_addr_cells(dev->node);
+	paw = of_n_addr_cells(dev->dev.of_node);
 
 	law_start = of_read_number(dt_range + aw, paw);
 	law_size = of_read_number(dt_range + aw + paw, sw);
@@ -1056,7 +1393,7 @@ int fsl_rio_setup(struct of_device *dev)
 	dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
 			law_start, law_size);
 
-	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
 	if (!ops) {
 		rc = -ENOMEM;
 		goto err_ops;
@@ -1066,6 +1403,7 @@ int fsl_rio_setup(struct of_device *dev)
 	ops->cread = fsl_rio_config_read;
 	ops->cwrite = fsl_rio_config_write;
 	ops->dsend = fsl_rio_doorbell_send;
+	ops->pwenable = fsl_rio_pw_enable;
 
 	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
 	if (!port) {
@@ -1088,11 +1426,12 @@ int fsl_rio_setup(struct of_device *dev)
 	port->iores.flags = IORESOURCE_MEM;
 	port->iores.name = "rio_io_win";
 
-	priv->bellirq = irq_of_parse_and_map(dev->node, 2);
-	priv->txirq = irq_of_parse_and_map(dev->node, 3);
-	priv->rxirq = irq_of_parse_and_map(dev->node, 4);
-	dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
-				priv->txirq, priv->rxirq);
+	priv->pwirq   = irq_of_parse_and_map(dev->dev.of_node, 0);
+	priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
+	priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
+	priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
+	dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
+		 priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
 
 	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
 	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
@@ -1108,6 +1447,7 @@ int fsl_rio_setup(struct of_device *dev)
 	rio_register_mport(port);
 
 	priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+	rio_regs_win = priv->regs_win;
 
 	/* Probe the master port phy type */
 	ccsr = in_be32(priv->regs_win + RIO_CCSR);
@@ -1165,7 +1505,8 @@ int fsl_rio_setup(struct of_device *dev)
 
 	/* Configure maintenance transaction window */
 	out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
-	out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);	/* 4M */
+	out_be32(&priv->maint_atmu_regs->rowar,
+		 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
 
 	priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
 
@@ -1174,6 +1515,12 @@ int fsl_rio_setup(struct of_device *dev)
 			(law_start + RIO_MAINT_WIN_SIZE) >> 12);
 	out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);	/* 4k */
 	fsl_rio_doorbell_init(port);
+	fsl_rio_port_write_init(port);
+
+	saved_mcheck_exception = ppc_md.machine_check_exception;
+	ppc_md.machine_check_exception = fsl_rio_mcheck_exception;
+	/* Ensure that RFXE is set */
+	mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000));
 
 	return 0;
 err:
@@ -1194,7 +1541,7 @@ static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
 {
 	int rc;
 	printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
-			dev->node->full_name);
+			dev->dev.of_node->full_name);
 
 	rc = fsl_rio_setup(dev);
 	if (rc)
@@ -1214,8 +1561,11 @@ static const struct of_device_id fsl_of_rio_rpn_ids[] = {
 };
 
 static struct of_platform_driver fsl_of_rio_rpn_driver = {
-	.name = "fsl-of-rio",
-	.match_table = fsl_of_rio_rpn_ids,
+	.driver = {
+		.name = "fsl-of-rio",
+		.owner = THIS_MODULE,
+		.of_match_table = fsl_of_rio_rpn_ids,
+	},
 	.probe = fsl_of_rio_rpn_probe,
 };
 
diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c
index 5da37c2..cf27df6 100644
--- a/arch/powerpc/sysdev/grackle.c
+++ b/arch/powerpc/sysdev/grackle.c
@@ -56,9 +56,9 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
 void __init setup_grackle(struct pci_controller *hose)
 {
 	setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
-	if (machine_is_compatible("PowerMac1,1"))
+	if (of_machine_is_compatible("PowerMac1,1"))
 		ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
-	if (machine_is_compatible("AAPL,PowerBook1998"))
+	if (of_machine_is_compatible("AAPL,PowerBook1998"))
 		grackle_set_loop_snoop(hose, 1);
 #if 0	/* Disabled for now, HW problems ??? */
 	grackle_set_stg(hose, 1);
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 0a55db8..6323e70 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -23,7 +23,7 @@ static unsigned char cached_8259[2] = { 0xff, 0xff };
 #define cached_A1 (cached_8259[0])
 #define cached_21 (cached_8259[1])
 
-static DEFINE_SPINLOCK(i8259_lock);
+static DEFINE_RAW_SPINLOCK(i8259_lock);
 
 static struct irq_host *i8259_host;
 
@@ -42,7 +42,7 @@ unsigned int i8259_irq(void)
 	if (pci_intack)
 		irq = readb(pci_intack);
 	else {
-		spin_lock(&i8259_lock);
+		raw_spin_lock(&i8259_lock);
 		lock = 1;
 
 		/* Perform an interrupt acknowledge cycle on controller 1. */
@@ -74,7 +74,7 @@ unsigned int i8259_irq(void)
 		irq = NO_IRQ;
 
 	if (lock)
-		spin_unlock(&i8259_lock);
+		raw_spin_unlock(&i8259_lock);
 	return irq;
 }
 
@@ -82,7 +82,7 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259_lock, flags);
+	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (irq_nr > 7) {
 		cached_A1 |= 1 << (irq_nr-8);
 		inb(0xA1); 	/* DUMMY */
@@ -95,7 +95,7 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr)
 		outb(cached_21, 0x21);
 		outb(0x20, 0x20);	/* Non-specific EOI */
 	}
-	spin_unlock_irqrestore(&i8259_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }
 
 static void i8259_set_irq_mask(int irq_nr)
@@ -110,13 +110,13 @@ static void i8259_mask_irq(unsigned int irq_nr)
 
 	pr_debug("i8259_mask_irq(%d)\n", irq_nr);
 
-	spin_lock_irqsave(&i8259_lock, flags);
+	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (irq_nr < 8)
 		cached_21 |= 1 << irq_nr;
 	else
 		cached_A1 |= 1 << (irq_nr-8);
 	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }
 
 static void i8259_unmask_irq(unsigned int irq_nr)
@@ -125,17 +125,17 @@ static void i8259_unmask_irq(unsigned int irq_nr)
 
 	pr_debug("i8259_unmask_irq(%d)\n", irq_nr);
 
-	spin_lock_irqsave(&i8259_lock, flags);
+	raw_spin_lock_irqsave(&i8259_lock, flags);
 	if (irq_nr < 8)
 		cached_21 &= ~(1 << irq_nr);
 	else
 		cached_A1 &= ~(1 << (irq_nr-8));
 	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 }
 
 static struct irq_chip i8259_pic = {
-	.name		= " i8259    ",
+	.name		= "i8259",
 	.mask		= i8259_mask_irq,
 	.disable	= i8259_mask_irq,
 	.unmask		= i8259_unmask_irq,
@@ -241,7 +241,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	unsigned long flags;
 
 	/* initialize the controller */
-	spin_lock_irqsave(&i8259_lock, flags);
+	raw_spin_lock_irqsave(&i8259_lock, flags);
 
 	/* Mask all first */
 	outb(0xff, 0xA1);
@@ -273,7 +273,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	outb(cached_A1, 0xA1);
 	outb(cached_21, 0x21);
 
-	spin_unlock_irqrestore(&i8259_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
 	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 28cdddd..d7b9b9c 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -32,7 +32,7 @@
 
 static struct ipic * primary_ipic;
 static struct irq_chip ipic_level_irq_chip, ipic_edge_irq_chip;
-static DEFINE_SPINLOCK(ipic_lock);
+static DEFINE_RAW_SPINLOCK(ipic_lock);
 
 static struct ipic_info ipic_info[] = {
 	[1] = {
@@ -530,13 +530,13 @@ static void ipic_unmask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&ipic_lock, flags);
+	raw_spin_lock_irqsave(&ipic_lock, flags);
 
 	temp = ipic_read(ipic->regs, ipic_info[src].mask);
 	temp |= (1 << (31 - ipic_info[src].bit));
 	ipic_write(ipic->regs, ipic_info[src].mask, temp);
 
-	spin_unlock_irqrestore(&ipic_lock, flags);
+	raw_spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
 static void ipic_mask_irq(unsigned int virq)
@@ -546,7 +546,7 @@ static void ipic_mask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&ipic_lock, flags);
+	raw_spin_lock_irqsave(&ipic_lock, flags);
 
 	temp = ipic_read(ipic->regs, ipic_info[src].mask);
 	temp &= ~(1 << (31 - ipic_info[src].bit));
@@ -556,7 +556,7 @@ static void ipic_mask_irq(unsigned int virq)
 	 * for nearly all cases. */
 	mb();
 
-	spin_unlock_irqrestore(&ipic_lock, flags);
+	raw_spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
 static void ipic_ack_irq(unsigned int virq)
@@ -566,7 +566,7 @@ static void ipic_ack_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&ipic_lock, flags);
+	raw_spin_lock_irqsave(&ipic_lock, flags);
 
 	temp = 1 << (31 - ipic_info[src].bit);
 	ipic_write(ipic->regs, ipic_info[src].ack, temp);
@@ -575,7 +575,7 @@ static void ipic_ack_irq(unsigned int virq)
 	 * for nearly all cases. */
 	mb();
 
-	spin_unlock_irqrestore(&ipic_lock, flags);
+	raw_spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
 static void ipic_mask_irq_and_ack(unsigned int virq)
@@ -585,7 +585,7 @@ static void ipic_mask_irq_and_ack(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&ipic_lock, flags);
+	raw_spin_lock_irqsave(&ipic_lock, flags);
 
 	temp = ipic_read(ipic->regs, ipic_info[src].mask);
 	temp &= ~(1 << (31 - ipic_info[src].bit));
@@ -598,7 +598,7 @@ static void ipic_mask_irq_and_ack(unsigned int virq)
 	 * for nearly all cases. */
 	mb();
 
-	spin_unlock_irqrestore(&ipic_lock, flags);
+	raw_spin_unlock_irqrestore(&ipic_lock, flags);
 }
 
 static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)
@@ -660,7 +660,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type)
 
 /* level interrupts and edge interrupts have different ack operations */
 static struct irq_chip ipic_level_irq_chip = {
-	.name		= " IPIC  ",
+	.name		= "IPIC",
 	.unmask		= ipic_unmask_irq,
 	.mask		= ipic_mask_irq,
 	.mask_ack	= ipic_mask_irq,
@@ -668,7 +668,7 @@ static struct irq_chip ipic_level_irq_chip = {
 };
 
 static struct irq_chip ipic_edge_irq_chip = {
-	.name		= " IPIC  ",
+	.name		= "IPIC",
 	.unmask		= ipic_unmask_irq,
 	.mask		= ipic_mask_irq,
 	.mask_ack	= ipic_mask_irq_and_ack,
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/sysdev/micropatch.c
index d8d6028..c0bb76e 100644
--- a/arch/powerpc/sysdev/micropatch.c
+++ b/arch/powerpc/sysdev/micropatch.c
@@ -4,6 +4,7 @@
  * also relocates SMC2, but this would require additional changes
  * to uart.c, so I am holding off on that for a moment.
  */
+#include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -16,6 +17,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
+#include <asm/cpm.h>
 #include <asm/cpm1.h>
 
 /*
@@ -24,7 +26,7 @@
 
 #ifdef CONFIG_I2C_SPI_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7FFFEFD9,
 	0x3FFD0000,
 	0x7FFB49F7,
@@ -143,7 +145,7 @@ uint patch_2000[] = {
 	0x5F8247F8
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3E303430,
 	0x34343737,
 	0xABF7BF9B,
@@ -182,7 +184,7 @@ uint patch_2f00[] = {
 
 #ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x3fff0000,
 	0x3ffd0000,
 	0x3ffb0000,
@@ -505,7 +507,7 @@ uint patch_2000[] = {
 	0x6079e2bb
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x30303030,
 	0x3e3e3434,
 	0xabbf9b99,
@@ -572,7 +574,7 @@ uint patch_2f00[] = {
 	0xf22f3f23
 };
 
-uint patch_2e00[] = {
+static uint patch_2e00[] __initdata = {
 	0x27eeeeee,
 	0xeeeeeeee,
 	0xeeeeeeee,
@@ -598,7 +600,7 @@ uint patch_2e00[] = {
 
 #ifdef CONFIG_USB_SOF_UCODE_PATCH
 
-uint patch_2000[] = {
+static uint patch_2000[] __initdata = {
 	0x7fff0000,
 	0x7ffd0000,
 	0x7ffb0000,
@@ -613,21 +615,25 @@ uint patch_2000[] = {
 	0x60750000
 };
 
-uint patch_2f00[] = {
+static uint patch_2f00[] __initdata = {
 	0x3030304c,
 	0xcab9e441,
 	0xa1aaf220
 };
 #endif
 
-void
-cpm_load_patch(cpm8xx_t	*cp)
+void __init cpm_load_patch(cpm8xx_t *cp)
 {
 	volatile uint		*dp;		/* Dual-ported RAM. */
 	volatile cpm8xx_t	*commproc;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	volatile iic_t		*iip;
-	volatile spi_t		*spp;
+	volatile struct spi_pram *spp;
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 	volatile smc_uart_t	*smp;
+#endif
+#endif
 	int	i;
 
 	commproc = cp;
@@ -668,8 +674,8 @@ cpm_load_patch(cpm8xx_t	*cp)
 	/* Put SPI above the IIC, also 32-byte aligned.
 	*/
 	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
+	spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+	spp->rpbase = i;
 
 # if defined(CONFIG_I2C_SPI_UCODE_PATCH)
 	commproc->cp_cpmcr1 = 0x802a;
diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c
index 69bd6f4..8c27d26 100644
--- a/arch/powerpc/sysdev/mpc8xx_pic.c
+++ b/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -94,7 +94,7 @@ static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip mpc8xx_pic = {
-	.name = " MPC8XX SIU ",
+	.name = "MPC8XX SIU",
 	.unmask = mpc8xx_unmask_irq,
 	.mask = mpc8xx_mask_irq,
 	.ack = mpc8xx_ack,
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index ee1c0e1..83f5196 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -15,6 +15,8 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
 
 #define MPC8XXX_GPIO_PINS	32
 
@@ -34,6 +36,7 @@ struct mpc8xxx_gpio_chip {
 	 * open drain mode safely
 	 */
 	u32 data;
+	struct irq_host *irq;
 };
 
 static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
@@ -127,12 +130,136 @@ static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val
 	return 0;
 }
 
+static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
+		return irq_create_mapping(mpc8xxx_gc->irq, offset);
+	else
+		return -ENXIO;
+}
+
+static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_desc_data(desc);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned int mask;
+
+	mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
+	if (mask)
+		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
+						     32 - ffs(mask)));
+}
+
+static void mpc8xxx_irq_unmask(unsigned int virq)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(virq)));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_mask(unsigned int virq)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(virq_to_hw(virq)));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_ack(unsigned int virq)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+
+	out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(virq_to_hw(virq)));
+}
+
+static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		setbits32(mm->regs + GPIO_ICR,
+			  mpc8xxx_gpio2mask(virq_to_hw(virq)));
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrbits32(mm->regs + GPIO_ICR,
+			  mpc8xxx_gpio2mask(virq_to_hw(virq)));
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct irq_chip mpc8xxx_irq_chip = {
+	.name		= "mpc8xxx-gpio",
+	.unmask		= mpc8xxx_irq_unmask,
+	.mask		= mpc8xxx_irq_mask,
+	.ack		= mpc8xxx_irq_ack,
+	.set_type	= mpc8xxx_irq_set_type,
+};
+
+static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	set_irq_chip_data(virq, h->host_data);
+	set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
+				  const u32 *intspec, unsigned int intsize,
+				  irq_hw_number_t *out_hwirq,
+				  unsigned int *out_flags)
+
+{
+	/* interrupt sense values coming from the device tree equal either
+	 * EDGE_FALLING or EDGE_BOTH
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = intspec[1];
+
+	return 0;
+}
+
+static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
+	.map	= mpc8xxx_gpio_irq_map,
+	.xlate	= mpc8xxx_gpio_irq_xlate,
+};
+
 static void __init mpc8xxx_add_controller(struct device_node *np)
 {
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
+	unsigned hwirq;
 	int ret;
 
 	mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
@@ -157,11 +284,32 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	else
 		gc->get = mpc8xxx_gpio_get;
 	gc->set = mpc8xxx_gpio_set;
+	gc->to_irq = mpc8xxx_gpio_to_irq;
 
 	ret = of_mm_gpiochip_add(np, mm_gc);
 	if (ret)
 		goto err;
 
+	hwirq = irq_of_parse_and_map(np, 0);
+	if (hwirq == NO_IRQ)
+		goto skip_irq;
+
+	mpc8xxx_gc->irq =
+		irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
+			       &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
+	if (!mpc8xxx_gc->irq)
+		goto skip_irq;
+
+	mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
+
+	/* ack and mask all irqs */
+	out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
+	out_be32(mm_gc->regs + GPIO_IMR, 0);
+
+	set_irq_data(hwirq, mpc8xxx_gc);
+	set_irq_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
+
+skip_irq:
 	return;
 
 err:
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 470dc6c..20b73c0 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -26,6 +26,7 @@
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include <asm/ptrace.h>
 #include <asm/signal.h>
@@ -46,7 +47,7 @@
 
 static struct mpic *mpics;
 static struct mpic *mpic_primary;
-static DEFINE_SPINLOCK(mpic_lock);
+static DEFINE_RAW_SPINLOCK(mpic_lock);
 
 #ifdef CONFIG_PPC32	/* XXX for now */
 #ifdef CONFIG_IRQ_ALL_CPUS
@@ -347,10 +348,10 @@ static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source)
 		unsigned int mask = 1U << (fixup->index & 0x1f);
 		writel(mask, fixup->applebase + soff);
 	} else {
-		spin_lock(&mpic->fixup_lock);
+		raw_spin_lock(&mpic->fixup_lock);
 		writeb(0x11 + 2 * fixup->index, fixup->base + 2);
 		writel(fixup->data, fixup->base + 4);
-		spin_unlock(&mpic->fixup_lock);
+		raw_spin_unlock(&mpic->fixup_lock);
 	}
 }
 
@@ -366,7 +367,7 @@ static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source,
 
 	DBG("startup_ht_interrupt(0x%x, 0x%x) index: %d\n",
 	    source, irqflags, fixup->index);
-	spin_lock_irqsave(&mpic->fixup_lock, flags);
+	raw_spin_lock_irqsave(&mpic->fixup_lock, flags);
 	/* Enable and configure */
 	writeb(0x10 + 2 * fixup->index, fixup->base + 2);
 	tmp = readl(fixup->base + 4);
@@ -374,7 +375,7 @@ static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source,
 	if (irqflags & IRQ_LEVEL)
 		tmp |= 0x22;
 	writel(tmp, fixup->base + 4);
-	spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags);
 
 #ifdef CONFIG_PM
 	/* use the lowest bit inverted to the actual HW,
@@ -396,12 +397,12 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source,
 	DBG("shutdown_ht_interrupt(0x%x, 0x%x)\n", source, irqflags);
 
 	/* Disable */
-	spin_lock_irqsave(&mpic->fixup_lock, flags);
+	raw_spin_lock_irqsave(&mpic->fixup_lock, flags);
 	writeb(0x10 + 2 * fixup->index, fixup->base + 2);
 	tmp = readl(fixup->base + 4);
 	tmp |= 1;
 	writel(tmp, fixup->base + 4);
-	spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags);
 
 #ifdef CONFIG_PM
 	/* use the lowest bit inverted to the actual HW,
@@ -515,7 +516,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 	BUG_ON(mpic->fixups == NULL);
 
 	/* Init spinlock */
-	spin_lock_init(&mpic->fixup_lock);
+	raw_spin_lock_init(&mpic->fixup_lock);
 
 	/* Map U3 config space. We assume all IO-APICs are on the primary bus
 	 * so we only need to map 64kB.
@@ -567,30 +568,26 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
-static int irq_choose_cpu(const cpumask_t *mask)
+static int irq_choose_cpu(const struct cpumask *mask)
 {
 	int cpuid;
 
 	if (cpumask_equal(mask, cpu_all_mask)) {
-		static int irq_rover;
-		static DEFINE_SPINLOCK(irq_rover_lock);
+		static int irq_rover = 0;
+		static DEFINE_RAW_SPINLOCK(irq_rover_lock);
 		unsigned long flags;
 
 		/* Round-robin distribution... */
 	do_round_robin:
-		spin_lock_irqsave(&irq_rover_lock, flags);
+		raw_spin_lock_irqsave(&irq_rover_lock, flags);
+
+		irq_rover = cpumask_next(irq_rover, cpu_online_mask);
+		if (irq_rover >= nr_cpu_ids)
+			irq_rover = cpumask_first(cpu_online_mask);
 
-		while (!cpu_online(irq_rover)) {
-			if (++irq_rover >= NR_CPUS)
-				irq_rover = 0;
-		}
 		cpuid = irq_rover;
-		do {
-			if (++irq_rover >= NR_CPUS)
-				irq_rover = 0;
-		} while (!cpu_online(irq_rover));
 
-		spin_unlock_irqrestore(&irq_rover_lock, flags);
+		raw_spin_unlock_irqrestore(&irq_rover_lock, flags);
 	} else {
 		cpuid = cpumask_first_and(mask, cpu_online_mask);
 		if (cpuid >= nr_cpu_ids)
@@ -600,7 +597,7 @@ static int irq_choose_cpu(const cpumask_t *mask)
 	return get_hard_smp_processor_id(cpuid);
 }
 #else
-static int irq_choose_cpu(const cpumask_t *mask)
+static int irq_choose_cpu(const struct cpumask *mask)
 {
 	return hard_smp_processor_id();
 }
@@ -813,12 +810,16 @@ int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
 	} else {
-		cpumask_t tmp;
+		cpumask_var_t tmp;
 
-		cpumask_and(&tmp, cpumask, cpu_online_mask);
+		alloc_cpumask_var(&tmp, GFP_KERNEL);
+
+		cpumask_and(tmp, cpumask, cpu_online_mask);
 
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
-			       mpic_physmask(cpus_addr(tmp)[0]));
+			       mpic_physmask(cpumask_bits(tmp)[0]));
+
+		free_cpumask_var(tmp);
 	}
 
 	return 0;
@@ -1368,14 +1369,14 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
 	unsigned long flags;
 	u32 v;
 
-	spin_lock_irqsave(&mpic_lock, flags);
+	raw_spin_lock_irqsave(&mpic_lock, flags);
 	v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1);
 	if (enable)
 		v |= MPIC_GREG_GLOBAL_CONF_1_SIE;
 	else
 		v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE;
 	mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v);
-	spin_unlock_irqrestore(&mpic_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
@@ -1388,7 +1389,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 	if (!mpic)
 		return;
 
-	spin_lock_irqsave(&mpic_lock, flags);
+	raw_spin_lock_irqsave(&mpic_lock, flags);
 	if (mpic_is_ipi(mpic, irq)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
@@ -1400,7 +1401,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 		mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	}
-	spin_unlock_irqrestore(&mpic_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
 void mpic_setup_this_cpu(void)
@@ -1415,7 +1416,7 @@ void mpic_setup_this_cpu(void)
 
 	DBG("%s: setup_this_cpu(%d)\n", mpic->name, hard_smp_processor_id());
 
-	spin_lock_irqsave(&mpic_lock, flags);
+	raw_spin_lock_irqsave(&mpic_lock, flags);
 
  	/* let the mpic know we want intrs. default affinity is 0xffffffff
 	 * until changed via /proc. That's how it's done on x86. If we want
@@ -1431,7 +1432,7 @@ void mpic_setup_this_cpu(void)
 	/* Set current processor priority to 0 */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0);
 
-	spin_unlock_irqrestore(&mpic_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic_lock, flags);
 #endif /* CONFIG_SMP */
 }
 
@@ -1460,7 +1461,7 @@ void mpic_teardown_this_cpu(int secondary)
 	BUG_ON(mpic == NULL);
 
 	DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id());
-	spin_lock_irqsave(&mpic_lock, flags);
+	raw_spin_lock_irqsave(&mpic_lock, flags);
 
 	/* let the mpic know we don't want intrs.  */
 	for (i = 0; i < mpic->num_sources ; i++)
@@ -1474,25 +1475,10 @@ void mpic_teardown_this_cpu(int secondary)
 	 */
 	mpic_eoi(mpic);
 
-	spin_unlock_irqrestore(&mpic_lock, flags);
+	raw_spin_unlock_irqrestore(&mpic_lock, flags);
 }
 
 
-void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
-{
-	struct mpic *mpic = mpic_primary;
-
-	BUG_ON(mpic == NULL);
-
-#ifdef DEBUG_IPI
-	DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
-#endif
-
-	mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
-		       ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE),
-		       mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
-}
-
 static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg)
 {
 	u32 src;
@@ -1575,7 +1561,7 @@ void mpic_request_ipis(void)
 	int i;
 	BUG_ON(mpic == NULL);
 
-	printk(KERN_INFO "mpic: requesting IPIs ... \n");
+	printk(KERN_INFO "mpic: requesting IPIs...\n");
 
 	for (i = 0; i < 4; i++) {
 		unsigned int vipi = irq_create_mapping(mpic->irqhost,
@@ -1588,8 +1574,25 @@ void mpic_request_ipis(void)
 	}
 }
 
+static void mpic_send_ipi(unsigned int ipi_no, const struct cpumask *cpu_mask)
+{
+	struct mpic *mpic = mpic_primary;
+
+	BUG_ON(mpic == NULL);
+
+#ifdef DEBUG_IPI
+	DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
+#endif
+
+	mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) +
+		       ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE),
+		       mpic_physmask(cpumask_bits(cpu_mask)[0]));
+}
+
 void smp_mpic_message_pass(int target, int msg)
 {
+	cpumask_var_t tmp;
+
 	/* make sure we're sending something that translates to an IPI */
 	if ((unsigned int)msg > 3) {
 		printk("SMP %d: smp_message_pass: unknown msg %d\n",
@@ -1598,13 +1601,17 @@ void smp_mpic_message_pass(int target, int msg)
 	}
 	switch (target) {
 	case MSG_ALL:
-		mpic_send_ipi(msg, 0xffffffff);
+		mpic_send_ipi(msg, cpu_online_mask);
 		break;
 	case MSG_ALL_BUT_SELF:
-		mpic_send_ipi(msg, 0xffffffff & ~(1 << smp_processor_id()));
+		alloc_cpumask_var(&tmp, GFP_NOWAIT);
+		cpumask_andnot(tmp, cpu_online_mask,
+			       cpumask_of(smp_processor_id()));
+		mpic_send_ipi(msg, tmp);
+		free_cpumask_var(tmp);
 		break;
 	default:
-		mpic_send_ipi(msg, 1 << target);
+		mpic_send_ipi(msg, cpumask_of(target));
 		break;
 	}
 }
@@ -1615,7 +1622,7 @@ int __init smp_mpic_probe(void)
 
 	DBG("smp_mpic_probe()...\n");
 
-	nr_cpus = cpus_weight(cpu_possible_map);
+	nr_cpus = cpumask_weight(cpu_possible_mask);
 
 	DBG("nr_cpus: %d\n", nr_cpus);
 
@@ -1659,7 +1666,7 @@ static int mpic_resume(struct sys_device *dev)
 			       mpic->save_data[i].dest);
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
-	{
+	if (mpic->fixups) {
 		struct mpic_irq_fixup *fixup = &mpic->fixups[i];
 
 		if (fixup->base) {
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 0f6ab06..3b6a9a4 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -60,7 +60,7 @@ static struct irq_chip mpic_pasemi_msi_chip = {
 	.eoi		= mpic_end_irq,
 	.set_type	= mpic_set_irq_type,
 	.set_affinity	= mpic_set_affinity,
-	.name		= "PASEMI-MSI ",
+	.name		= "PASEMI-MSI",
 };
 
 static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
index 5a32cbe..5287e95 100644
--- a/arch/powerpc/sysdev/msi_bitmap.c
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/bitmap.h>
 #include <asm/msi_bitmap.h>
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index b6bd775..31acd3b 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/prom.h>
 
@@ -189,6 +190,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
 	pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
 	if (!pdev)
 		return -ENOMEM;
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	err = platform_device_add_resources(pdev, r, 5);
 	if (err)
@@ -302,6 +304,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
 	if (!pdev)
 		return -ENOMEM;
 
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 	err = platform_device_add_resources(pdev, r, 1);
 	if (err)
 		goto error;
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 1456015..198f288 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -24,7 +24,7 @@
 #define MV64X60_VAL_LEN_MAX		11
 #define MV64X60_PCICFG_CPCI_HOTSWAP	0x68
 
-static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
+static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj,
 				   struct bin_attribute *attr, char *buf,
 				   loff_t off, size_t count)
 {
@@ -45,7 +45,7 @@ static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
 	return sprintf(buf, "0x%08x\n", v);
 }
 
-static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
+static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj,
 				    struct bin_attribute *attr, char *buf,
 				    loff_t off, size_t count)
 {
diff --git a/arch/powerpc/sysdev/of_rtc.c b/arch/powerpc/sysdev/of_rtc.c
index 3d54450..c9e803f 100644
--- a/arch/powerpc/sysdev/of_rtc.c
+++ b/arch/powerpc/sysdev/of_rtc.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
 
 static __initdata struct {
 	const char *compatible;
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index aaa9159..d07137a 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -123,7 +124,7 @@ static void pmi_notify_handlers(struct work_struct *work)
 static int pmi_of_probe(struct of_device *dev,
 			const struct of_device_id *match)
 {
-	struct device_node *np = dev->node;
+	struct device_node *np = dev->dev.of_node;
 	int rc;
 
 	if (data) {
@@ -205,11 +206,12 @@ static int pmi_of_remove(struct of_device *dev)
 }
 
 static struct of_platform_driver pmi_of_platform_driver = {
-	.match_table	= pmi_match,
 	.probe		= pmi_of_probe,
 	.remove		= pmi_of_remove,
-	.driver		= {
-		.name	= "pmi",
+	.driver = {
+		.name = "pmi",
+		.owner = THIS_MODULE,
+		.of_match_table = pmi_match,
 	},
 };
 
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
index 110efe2..3812fc3 100644
--- a/arch/powerpc/sysdev/ppc4xx_gpio.c
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -29,6 +29,7 @@
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 
 #define GPIO_MASK(gpio)		(0x80000000 >> (gpio))
 #define GPIO_MASK2(gpio)	(0xc0000000 >> ((gpio) * 2))
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 6ff9d71..156aa7d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/bootmem.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/pci-bridge.h>
@@ -569,7 +570,8 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	/* Setup config space */
-	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+					PPC_INDIRECT_TYPE_SET_CFG_TYPE);
 
 	/* Disable all windows */
 	writel(0, reg + PCIX0_POM0SA);
@@ -972,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
 	.setup_utl	= ppc460ex_pciex_init_utl,
 };
 
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+	/* HSS drive amplitude */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+	/* HSS TX pre-emphasis */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+	/* HSS TX calibration control */
+	mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+	/* HSS TX slew control */
+	mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+	udelay(100);
+
+	/* De-assert PLLRESET */
+	dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+	/* Reset DL, UTL, GPL before configuration */
+	mtdcri(SDR0, PESDR0_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR1_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR2_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+	udelay(100);
+
+	/*
+	 * If bifurcation is not enabled, u-boot would have disabled the
+	 * third PCIe port
+	 */
+	if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+				0x00000001)) {
+		printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+		printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+		return 3;
+	}
+
+	printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+	return 2;
+}
+
+static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+	if (port->endpoint)
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0x01000000, 0);
+	else
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0, 0x01000000);
+
+	/*Gen-1*/
+	mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
+
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+			PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return 0;
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* Max 128 Bytes */
+	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.core_init	= ppc460sx_pciex_core_init,
+	.port_init_hw	= ppc460sx_pciex_init_port_hw,
+	.setup_utl	= ppc460sx_pciex_init_utl,
+};
+
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -1087,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 	}
 	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
 		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+		ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index d04e40b..56d9e5d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -324,6 +324,64 @@
 #define PESDR0_460EX_IHS2		0x036D
 
 /*
+ * 460SX addtional DCRs
+ */
+#define PESDRn_460SX_RCEI		0x02
+
+#define PESDR0_460SX_HSSL0DAMP		0x320
+#define PESDR0_460SX_HSSL1DAMP		0x321
+#define PESDR0_460SX_HSSL2DAMP		0x322
+#define PESDR0_460SX_HSSL3DAMP		0x323
+#define PESDR0_460SX_HSSL4DAMP		0x324
+#define PESDR0_460SX_HSSL5DAMP		0x325
+#define PESDR0_460SX_HSSL6DAMP		0x326
+#define PESDR0_460SX_HSSL7DAMP		0x327
+
+#define PESDR1_460SX_HSSL0DAMP		0x354
+#define PESDR1_460SX_HSSL1DAMP		0x355
+#define PESDR1_460SX_HSSL2DAMP		0x356
+#define PESDR1_460SX_HSSL3DAMP		0x357
+
+#define PESDR2_460SX_HSSL0DAMP		0x384
+#define PESDR2_460SX_HSSL1DAMP		0x385
+#define PESDR2_460SX_HSSL2DAMP		0x386
+#define PESDR2_460SX_HSSL3DAMP		0x387
+
+#define PESDR0_460SX_HSSL0COEFA		0x328
+#define PESDR0_460SX_HSSL1COEFA		0x329
+#define PESDR0_460SX_HSSL2COEFA		0x32A
+#define PESDR0_460SX_HSSL3COEFA		0x32B
+#define PESDR0_460SX_HSSL4COEFA		0x32C
+#define PESDR0_460SX_HSSL5COEFA		0x32D
+#define PESDR0_460SX_HSSL6COEFA		0x32E
+#define PESDR0_460SX_HSSL7COEFA		0x32F
+
+#define PESDR1_460SX_HSSL0COEFA		0x358
+#define PESDR1_460SX_HSSL1COEFA		0x359
+#define PESDR1_460SX_HSSL2COEFA		0x35A
+#define PESDR1_460SX_HSSL3COEFA		0x35B
+
+#define PESDR2_460SX_HSSL0COEFA		0x388
+#define PESDR2_460SX_HSSL1COEFA		0x389
+#define PESDR2_460SX_HSSL2COEFA		0x38A
+#define PESDR2_460SX_HSSL3COEFA		0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV	0x339
+#define PESDR1_460SX_HSSL1CALDRV	0x361
+#define PESDR2_460SX_HSSL1CALDRV	0x391
+
+#define PESDR0_460SX_HSSSLEW		0x338
+#define PESDR1_460SX_HSSSLEW		0x360
+#define PESDR2_460SX_HSSSLEW		0x390
+
+#define PESDR0_460SX_HSSCTLSET		0x31E
+#define PESDR1_460SX_HSSCTLSET		0x352
+#define PESDR2_460SX_HSSCTLSET		0x382
+
+#define PESDR0_460SX_RCSSET		0x304
+#define PESDR1_460SX_RCSSET		0x344
+#define PESDR2_460SX_RCSSET		0x374
+/*
  * Of the above, some are common offsets from the base
  */
 #define PESDRn_UTLSET1			0x00
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index 5b32adc..d3d6ce3 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -174,7 +174,8 @@ static int __init ppc4xx_l2c_probe(void)
 		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
 
 	/* Check for 460EX/GT special handling */
-	if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+	if (of_device_is_compatible(np, "ibm,l2-cache-460ex") ||
+	    of_device_is_compatible(np, "ibm,l2-cache-460gt"))
 		r |= L2C_CFG_RDBW;
 
 	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
@@ -190,11 +191,31 @@ static int __init ppc4xx_l2c_probe(void)
 arch_initcall(ppc4xx_l2c_probe);
 
 /*
- * At present, this routine just applies a system reset.
+ * Apply a system reset. Alternatively a board specific value may be
+ * provided via the "reset-type" property in the cpu node.
  */
 void ppc4xx_reset_system(char *cmd)
 {
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+	struct device_node *np;
+	u32 reset_type = DBCR0_RST_SYSTEM;
+	const u32 *prop;
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np) {
+		prop = of_get_property(np, "reset-type", NULL);
+
+		/*
+		 * Check if property exists and if it is in range:
+		 * 1 - PPC4xx core reset
+		 * 2 - PPC4xx chip reset
+		 * 3 - PPC4xx system reset (default)
+		 */
+		if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3)))
+			reset_type = prop[0] << 28;
+	}
+
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
+
 	while (1)
 		;	/* Just in case the reset doesn't work */
 }
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 8e7a776..dc8f8d6 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 #include <asm/qe.h>
 
 struct qe_gpio_chip {
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 149393c..093e0ae 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -669,8 +669,11 @@ static const struct of_device_id qe_ids[] = {
 };
 
 static struct of_platform_driver qe_driver = {
-	.driver.name = "fsl-qe",
-	.match_table = qe_ids,
+	.driver = {
+		.name = "fsl-qe",
+		.owner = THIS_MODULE,
+		.of_match_table = qe_ids,
+	},
 	.probe = qe_probe,
 	.resume = qe_resume,
 };
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 2acc928..541ba98 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -33,7 +33,7 @@
 
 #include "qe_ic.h"
 
-static DEFINE_SPINLOCK(qe_ic_lock);
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
 
 static struct qe_ic_info qe_ic_info[] = {
 	[1] = {
@@ -201,13 +201,13 @@ static void qe_ic_unmask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
 		    temp | qe_ic_info[src].mask);
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static void qe_ic_mask_irq(unsigned int virq)
@@ -217,7 +217,7 @@ static void qe_ic_mask_irq(unsigned int virq)
 	unsigned long flags;
 	u32 temp;
 
-	spin_lock_irqsave(&qe_ic_lock, flags);
+	raw_spin_lock_irqsave(&qe_ic_lock, flags);
 
 	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
@@ -233,11 +233,11 @@ static void qe_ic_mask_irq(unsigned int virq)
 	 */
 	mb();
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
+	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
 
 static struct irq_chip qe_ic_irq_chip = {
-	.name = " QEIC  ",
+	.name = "QEIC",
 	.unmask = qe_ic_unmask_irq,
 	.mask = qe_ic_mask_irq,
 	.mask_ack = qe_ic_mask_irq,
@@ -256,7 +256,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
 	struct irq_chip *chip;
 
 	if (qe_ic_info[hw].mask == 0) {
-		printk(KERN_ERR "Can't map reserved IRQ \n");
+		printk(KERN_ERR "Can't map reserved IRQ\n");
 		return -EINVAL;
 	}
 	/* Default chip */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 7c87460..77e4934 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -157,13 +157,13 @@ int par_io_of_config(struct device_node *np)
 	const unsigned int *pio_map;
 
 	if (par_io == NULL) {
-		printk(KERN_ERR "par_io not initialized \n");
+		printk(KERN_ERR "par_io not initialized\n");
 		return -1;
 	}
 
 	ph = of_get_property(np, "pio-handle", NULL);
 	if (ph == NULL) {
-		printk(KERN_ERR "pio-handle not available \n");
+		printk(KERN_ERR "pio-handle not available\n");
 		return -1;
 	}
 
@@ -171,12 +171,12 @@ int par_io_of_config(struct device_node *np)
 
 	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
 	if (pio_map == NULL) {
-		printk(KERN_ERR "pio-map is not set! \n");
+		printk(KERN_ERR "pio-map is not set!\n");
 		return -1;
 	}
 	pio_map_len /= sizeof(unsigned int);
 	if ((pio_map_len % 6) != 0) {
-		printk(KERN_ERR "pio-map format wrong! \n");
+		printk(KERN_ERR "pio-map format wrong!\n");
 		return -1;
 	}
 
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index ebb442e..fa589b2 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
-#include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
index 43c4569..d5fb173 100644
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -21,6 +21,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/gpio.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 #include "simple_gpio.h"
 
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 595034c..0ab9281 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 6f220a9..0038fb7 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -177,7 +177,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip uic_irq_chip = {
-	.name		= " UIC  ",
+	.name		= "UIC",
 	.unmask		= uic_unmask_irq,
 	.mask		= uic_mask_irq,
  	.mask_ack	= uic_mask_ack_irq,
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 4e6152c..8bad7d5 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -61,7 +61,7 @@ static int xmon_owner;
 static int xmon_gate;
 #endif /* CONFIG_SMP */
 
-static unsigned long in_xmon = 0;
+static unsigned long in_xmon __read_mostly = 0;
 
 static unsigned long adrs;
 static int size = 1;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index c802352..bee1c0f 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -54,6 +54,9 @@ config GENERIC_BUG
 	depends on BUG
 	default y
 
+config GENERIC_BUG_RELATIVE_POINTERS
+	def_bool y
+
 config NO_IOMEM
 	def_bool y
 
@@ -87,6 +90,7 @@ config S390
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_DEFAULT_NO_SPIN_MUTEXES
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
@@ -95,6 +99,10 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_EVENTS
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
 	select ARCH_INLINE_SPIN_TRYLOCK
 	select ARCH_INLINE_SPIN_TRYLOCK_BH
 	select ARCH_INLINE_SPIN_LOCK
@@ -437,13 +445,6 @@ config FORCE_MAX_ZONEORDER
 	int
 	default "9"
 
-config PROCESS_DEBUG
-	bool "Show crashed user process info"
-	help
-	  Say Y to print all process fault locations to the console.  This is
-	  a debugging option; you probably do not want to set it unless you
-	  are an S390 port maintainer.
-
 config PFAULT
 	bool "Pseudo page fault support"
 	help
@@ -479,13 +480,6 @@ config CMM
 	  Everybody who wants to run Linux under VM should select this
 	  option.
 
-config CMM_PROC
-	bool "/proc interface to cooperative memory management"
-	depends on CMM
-	help
-	  Select this option to enable the /proc interface to the
-	  cooperative memory management.
-
 config CMM_IUCV
 	bool "IUCV special message interface to cooperative memory management"
 	depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 2283933..45e0c61 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -6,4 +6,17 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
+config DEBUG_STRICT_USER_COPY_CHECKS
+	bool "Strict user copy size checks"
+	---help---
+	  Enabling this option turns a certain set of sanity checks for user
+	  copy operations into compile time warnings.
+
+	  The copy_from_user() etc checks are there to help test if there
+	  are sufficient security checks on the length argument of
+	  the copy operation, by having gcc prove that the argument is
+	  within bounds.
+
+	  If unsure, or if you run an older (pre 4.4) gcc, say N.
+
 endmenu
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 83ef872..0c9e6c6 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -14,6 +14,7 @@
 #
 
 ifndef CONFIG_64BIT
+LD_BFD		:= elf32-s390
 LDFLAGS		:= -m elf_s390
 KBUILD_CFLAGS	+= -m31
 KBUILD_AFLAGS	+= -m31
@@ -21,6 +22,7 @@ UTS_MACHINE	:= s390
 STACK_SIZE	:= 8192
 CHECKFLAGS	+= -D__s390__ -msize-long
 else
+LD_BFD		:= elf64-s390
 LDFLAGS		:= -m elf64_s390
 KBUILD_AFLAGS_MODULE += -fpic -D__PIC__
 KBUILD_CFLAGS_MODULE += -fpic -D__PIC__
@@ -31,6 +33,8 @@ STACK_SIZE	:= 16384
 CHECKFLAGS	+= -D__s390__ -D__s390x__
 endif
 
+export LD_BFD
+
 cflags-$(CONFIG_MARCH_G5)   += $(call cc-option,-march=g5)
 cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900)
 cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990)
@@ -86,7 +90,9 @@ KBUILD_AFLAGS	+= $(aflags-y)
 OBJCOPYFLAGS	:= -O binary
 LDFLAGS_vmlinux := -e start
 
-head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
+head-y		:= arch/s390/kernel/head.o
+head-y		+= arch/s390/kernel/$(if $(CONFIG_64BIT),head64.o,head31.o)
+head-y		+= arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
 		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
@@ -100,21 +106,28 @@ drivers-$(CONFIG_OPROFILE)	+= arch/s390/oprofile/
 
 boot		:= arch/s390/boot
 
-all: image
+all: image bzImage
 
 install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
-image: vmlinux
+image bzImage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 zfcpdump:
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+vdso_install:
+ifeq ($(CONFIG_64BIT),y)
+	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
+endif
+	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 # Don't use tabs in echo arguments
 define archhelp
   echo  '* image           - Kernel image for IPL ($(boot)/image)'
+  echo	'* bzImage         - Compressed kernel image for IPL ($(boot)/bzImage)'
 endef
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 4188cbe..e43fe75 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
 #include <linux/pagemap.h>
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index 4ce7fa9..9a9586f 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
 #include <linux/netdevice.h>
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 55c80ffd..92f1cb7 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -181,7 +181,7 @@ static int __init appldata_os_init(void)
 		goto out;
 	}
 
-	appldata_os_data = kzalloc(max_size, GFP_DMA);
+	appldata_os_data = kzalloc(max_size, GFP_KERNEL | GFP_DMA);
 	if (appldata_os_data == NULL) {
 		rc = -ENOMEM;
 		goto out;
diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile
index 4d97eef..8800cf09 100644
--- a/arch/s390/boot/Makefile
+++ b/arch/s390/boot/Makefile
@@ -9,10 +9,18 @@ COMPILE_VERSION := __linux_compile_version_id__`hostname |  \
 EXTRA_CFLAGS  := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I.
 
 targets := image
+targets += bzImage
+subdir- := compressed
 
 $(obj)/image: vmlinux FORCE
 	$(call if_changed,objcopy)
 
+$(obj)/bzImage: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
 install: $(CONFIGURE) $(obj)/image
 	sh -x  $(srctree)/$(obj)/install.sh $(KERNELRELEASE) $(obj)/image \
 	      System.map Kerntypes "$(INSTALL_PATH)"
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
new file mode 100644
index 0000000..1c999f7
--- /dev/null
+++ b/arch/s390/boot/compressed/Makefile
@@ -0,0 +1,63 @@
+#
+# linux/arch/s390/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+BITS := $(if $(CONFIG_64BIT),64,31)
+
+targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+	   vmlinux.bin.lzma vmlinux.bin.lzo misc.o piggy.o sizes.h head$(BITS).o
+
+KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CFLAGS += $(call cc-option,-mpacked-stack)
+KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
+
+GCOV_PROFILE := n
+
+OBJECTS := $(addprefix $(objtree)/arch/s390/kernel/, head.o sclp.o ebcdic.o)
+OBJECTS += $(obj)/head$(BITS).o $(obj)/misc.o $(obj)/piggy.o
+
+LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS)
+	$(call if_changed,ld)
+	@:
+
+sed-sizes := -e 's/^\([0-9a-fA-F]*\) . \(__bss_start\|_end\)$$/\#define SZ\2 0x\1/p'
+
+quiet_cmd_sizes = GEN $@
+      cmd_sizes = $(NM) $< | sed -n $(sed-sizes) > $@
+
+$(obj)/sizes.h: vmlinux
+	$(call if_changed,sizes)
+
+AFLAGS_head$(BITS).o += -I$(obj)
+$(obj)/head$(BITS).o: $(obj)/sizes.h
+
+CFLAGS_misc.o += -I$(obj)
+$(obj)/misc.o: $(obj)/sizes.h
+
+OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
+$(obj)/vmlinux.bin: vmlinux
+	$(call if_changed,objcopy)
+
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_KERNEL_LZO)  := lzo
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
+	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
+	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+	$(call if_changed,lzo)
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y)
+	$(call if_changed,ld)
diff --git a/arch/s390/boot/compressed/head31.S b/arch/s390/boot/compressed/head31.S
new file mode 100644
index 0000000..2a5523a
--- /dev/null
+++ b/arch/s390/boot/compressed/head31.S
@@ -0,0 +1,51 @@
+/*
+ * Startup glue code to uncompress the kernel
+ *
+ * Copyright IBM Corp. 2010
+ *
+ *   Author(s):	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include "sizes.h"
+
+__HEAD
+	.globl	startup_continue
+startup_continue:
+	basr	%r13,0			# get base
+.LPG1:
+	# setup stack
+	l	%r15,.Lstack-.LPG1(%r13)
+	ahi	%r15,-96
+	l	%r1,.Ldecompress-.LPG1(%r13)
+	basr	%r14,%r1
+	# setup registers for memory mover & branch to target
+	lr	%r4,%r2
+	l	%r2,.Loffset-.LPG1(%r13)
+	la	%r4,0(%r2,%r4)
+	l	%r3,.Lmvsize-.LPG1(%r13)
+	lr	%r5,%r3
+	# move the memory mover someplace safe
+	la	%r1,0x200
+	mvc	0(mover_end-mover,%r1),mover-.LPG1(%r13)
+	# decompress image is started at 0x11000
+	lr	%r6,%r2
+	br	%r1
+mover:
+	mvcle	%r2,%r4,0
+	jo	mover
+	br	%r6
+mover_end:
+
+	.align	8
+.Lstack:
+	.long	0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
+.Ldecompress:
+	.long	decompress_kernel
+.Loffset:
+	.long	0x11000
+.Lmvsize:
+	.long	SZ__bss_start
diff --git a/arch/s390/boot/compressed/head64.S b/arch/s390/boot/compressed/head64.S
new file mode 100644
index 0000000..2982cb1
--- /dev/null
+++ b/arch/s390/boot/compressed/head64.S
@@ -0,0 +1,48 @@
+/*
+ * Startup glue code to uncompress the kernel
+ *
+ * Copyright IBM Corp. 2010
+ *
+ *   Author(s):	Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include "sizes.h"
+
+__HEAD
+	.globl	startup_continue
+startup_continue:
+	basr	%r13,0			# get base
+.LPG1:
+	# setup stack
+	lg	%r15,.Lstack-.LPG1(%r13)
+	aghi	%r15,-160
+	brasl	%r14,decompress_kernel
+	# setup registers for memory mover & branch to target
+	lgr	%r4,%r2
+	lg	%r2,.Loffset-.LPG1(%r13)
+	la	%r4,0(%r2,%r4)
+	lg	%r3,.Lmvsize-.LPG1(%r13)
+	lgr	%r5,%r3
+	# move the memory mover someplace safe
+	la	%r1,0x200
+	mvc	0(mover_end-mover,%r1),mover-.LPG1(%r13)
+	# decompress image is started at 0x11000
+	lgr	%r6,%r2
+	br	%r1
+mover:
+	mvcle	%r2,%r4,0
+	jo	mover
+	br	%r6
+mover_end:
+
+	.align	8
+.Lstack:
+	.quad	0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
+.Loffset:
+	.quad	0x11000
+.Lmvsize:
+	.quad	SZ__bss_start
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
new file mode 100644
index 0000000..0851eb1
--- /dev/null
+++ b/arch/s390/boot/compressed/misc.c
@@ -0,0 +1,162 @@
+/*
+ * Definitions and wrapper functions for kernel decompressor
+ *
+ * Copyright IBM Corp. 2010
+ *
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/ipl.h>
+#include "sizes.h"
+
+/*
+ * gzip declarations
+ */
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#undef memmove
+#define memzero(s, n) memset((s), 0, (n))
+
+/* Symbols defined by linker scripts */
+extern char input_data[];
+extern int input_len;
+extern char _text, _end;
+extern char _bss, _ebss;
+
+static void error(char *m);
+
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+extern _sclp_print_early(const char *);
+
+int puts(const char *s)
+{
+	_sclp_print_early(s);
+	return 0;
+}
+
+void *memset(void *s, int c, size_t n)
+{
+	char *xs;
+
+	if (c == 0)
+		return __builtin_memset(s, 0, n);
+
+	xs = (char *) s;
+	if (n > 0)
+		do {
+			*xs++ = c;
+		} while (--n > 0);
+	return s;
+}
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+	return __builtin_memcpy(__dest, __src, __n);
+}
+
+void *memmove(void *__dest, __const void *__src, size_t __n)
+{
+	char *d;
+	const char *s;
+
+	if (__dest <= __src)
+		return __builtin_memcpy(__dest, __src, __n);
+	d = __dest + __n;
+	s = __src + __n;
+	while (__n--)
+		*--d = *--s;
+	return __dest;
+}
+
+static void error(char *x)
+{
+	unsigned long long psw = 0x000a0000deadbeefULL;
+
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	asm volatile("lpsw %0" : : "Q" (psw));
+}
+
+/*
+ * Safe guard the ipl parameter block against a memory area that will be
+ * overwritten. The validity check for the ipl parameter block is complex
+ * (see cio_get_iplinfo and ipl_save_parameters) but if the pointer to
+ * the ipl parameter block intersects with the passed memory area we can
+ * safely assume that we can read from that memory. In that case just copy
+ * the memory to IPL_PARMBLOCK_ORIGIN even if there is no ipl parameter
+ * block.
+ */
+static void check_ipl_parmblock(void *start, unsigned long size)
+{
+	void *src, *dst;
+
+	src = (void *)(unsigned long) S390_lowcore.ipl_parmblock_ptr;
+	if (src + PAGE_SIZE <= start || src >= start + size)
+		return;
+	dst = (void *) IPL_PARMBLOCK_ORIGIN;
+	memmove(dst, src, PAGE_SIZE);
+	S390_lowcore.ipl_parmblock_ptr = IPL_PARMBLOCK_ORIGIN;
+}
+
+unsigned long decompress_kernel(void)
+{
+	unsigned long output_addr;
+	unsigned char *output;
+
+	check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+	memset(&_bss, 0, &_ebss - &_bss);
+	free_mem_ptr = (unsigned long)&_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+	output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * Move the initrd right behind the end of the decompressed
+	 * kernel image.
+	 */
+	if (INITRD_START && INITRD_SIZE &&
+	    INITRD_START < (unsigned long) output + SZ__bss_start) {
+		check_ipl_parmblock(output + SZ__bss_start,
+				    INITRD_START + INITRD_SIZE);
+		memmove(output + SZ__bss_start,
+			(void *) INITRD_START, INITRD_SIZE);
+		INITRD_START = (unsigned long) output + SZ__bss_start;
+	}
+#endif
+
+	puts("Uncompressing Linux... ");
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	puts("Ok, booting the kernel.\n");
+	return (unsigned long) output;
+}
+
diff --git a/arch/s390/boot/compressed/vmlinux.lds.S b/arch/s390/boot/compressed/vmlinux.lds.S
new file mode 100644
index 0000000..d80f79d
--- /dev/null
+++ b/arch/s390/boot/compressed/vmlinux.lds.S
@@ -0,0 +1,55 @@
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_64BIT
+OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390")
+OUTPUT_ARCH(s390:64-bit)
+#else
+OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
+OUTPUT_ARCH(s390)
+#endif
+
+ENTRY(startup)
+
+SECTIONS
+{
+	/* Be careful parts of head_64.S assume startup_32 is at
+	 * address 0.
+	 */
+	. = 0;
+	.head.text : {
+		_head = . ;
+		HEAD_TEXT
+		_ehead = . ;
+	}
+	.rodata.compressed : {
+		*(.rodata.compressed)
+	}
+	.text :	{
+		_text = .;	/* Text */
+		*(.text)
+		*(.text.*)
+		_etext = . ;
+	}
+	.rodata : {
+		_rodata = . ;
+		*(.rodata)	 /* read-only data */
+		*(.rodata.*)
+		_erodata = . ;
+	}
+	.data :	{
+		_data = . ;
+		*(.data)
+		*(.data.*)
+		_edata = . ;
+	}
+	. = ALIGN(256);
+	.bss : {
+		_bss = . ;
+		*(.bss)
+		*(.bss.*)
+		*(COMMON)
+		. = ALIGN(8);	/* For convenience during zeroing */
+		_ebss = .;
+	}
+	_end = .;
+}
diff --git a/arch/s390/boot/compressed/vmlinux.scr b/arch/s390/boot/compressed/vmlinux.scr
new file mode 100644
index 0000000..f02382a
--- /dev/null
+++ b/arch/s390/boot/compressed/vmlinux.scr
@@ -0,0 +1,10 @@
+SECTIONS
+{
+  .rodata.compressed : {
+	input_len = .;
+	LONG(input_data_end - input_data) input_data = .;
+	*(.data)
+	output_len = . - 4;
+	input_data_end = .;
+	}
+}
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 6be4503..58f4673 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -78,14 +78,14 @@ static int setkey_fallback_cip(struct crypto_tfm *tfm, const u8 *in_key,
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
 	int ret;
 
-	sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
-	sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags &
+	sctx->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+	sctx->fallback.cip->base.crt_flags |= (tfm->crt_flags &
 			CRYPTO_TFM_REQ_MASK);
 
 	ret = crypto_cipher_setkey(sctx->fallback.cip, in_key, key_len);
 	if (ret) {
 		tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
-		tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags &
+		tfm->crt_flags |= (sctx->fallback.cip->base.crt_flags &
 				CRYPTO_TFM_RES_MASK);
 	}
 	return ret;
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index a320990..aa819da 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/random.h>
+#include <linux/slab.h>
 #include <asm/debug.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 7903ec4..f42dbab 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -79,7 +79,7 @@ int s390_sha_final(struct shash_desc *desc, u8 *out)
 	memset(ctx->buf + index, 0x00, end - index - 8);
 
 	/*
-	 * Append message length. Well, SHA-512 wants a 128 bit lenght value,
+	 * Append message length. Well, SHA-512 wants a 128 bit length value,
 	 * nevertheless we use u64, should be enough for now...
 	 */
 	bits = ctx->count * 8;
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index b416aa1..253f158 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 09:03:07 2010
+# Linux kernel version: 2.6.35-rc1
+# Fri Jun  4 11:32:40 2010
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -17,6 +17,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
 CONFIG_NO_IOMEM=y
 CONFIG_NO_DMA=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -34,8 +35,17 @@ CONFIG_CONSTRUCTORS=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -55,15 +65,11 @@ CONFIG_TREE_RCU=y
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=64
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
@@ -72,6 +78,8 @@ CONFIG_CGROUP_NS=y
 # CONFIG_CPUSETS is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_BLK_CGROUP is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -86,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -119,6 +128,7 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -127,6 +137,7 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
 
 #
@@ -149,7 +160,6 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -158,7 +168,6 @@ CONFIG_BLOCK_COMPAT=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_CFQ_GROUP_IOSCHED is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
@@ -311,7 +320,6 @@ CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PROCESS_DEBUG is not set
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
@@ -338,13 +346,13 @@ CONFIG_PM_SLEEP=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -448,6 +456,7 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
+# CONFIG_NET_SCTPPROBE is not set
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
@@ -456,6 +465,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -516,12 +526,14 @@ CONFIG_NET_ACT_NAT=m
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
@@ -536,6 +548,7 @@ CONFIG_CAN_VCAN=m
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 # CONFIG_PCMCIA is not set
 CONFIG_CCW=y
 
@@ -598,6 +611,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_DMA is not set
@@ -717,6 +731,7 @@ CONFIG_VIRTIO_NET=m
 # Character devices
 #
 CONFIG_DEVKMEM=y
+# CONFIG_N_GSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -764,6 +779,7 @@ CONFIG_S390_TAPE_34XX=m
 # CONFIG_MONREADER is not set
 CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
+# CONFIG_RAMOOPS is not set
 
 #
 # PPS support
@@ -777,10 +793,6 @@ CONFIG_S390_VMUR=m
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
 # CONFIG_AUXDISPLAY is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -856,6 +868,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -884,6 +897,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -945,6 +959,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -962,16 +977,22 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 # CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -988,10 +1009,16 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_KPROBE_EVENT=y
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 CONFIG_SAMPLES=y
+# CONFIG_SAMPLE_TRACEPOINTS is not set
+# CONFIG_SAMPLE_TRACE_EVENTS is not set
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
 # Security options
@@ -1025,6 +1052,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
@@ -1112,7 +1140,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 # CONFIG_CRYPTO_DES_S390 is not set
 # CONFIG_CRYPTO_AES_S390 is not set
 CONFIG_S390_PRNG=m
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1129,14 +1157,16 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_NLATTR=y
 CONFIG_HAVE_KVM=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
+# CONFIG_VHOST_NET is not set
 CONFIG_VIRTIO=y
 CONFIG_VIRTIO_RING=y
 CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h
index aea5720..fa487d4 100644
--- a/arch/s390/hypfs/hypfs.h
+++ b/arch/s390/hypfs/hypfs.h
@@ -11,6 +11,7 @@
 
 #include <linux/fs.h>
 #include <linux/types.h>
+#include <linux/debugfs.h>
 
 #define REG_FILE_MODE    0440
 #define UPDATE_FILE_MODE 0220
@@ -34,6 +35,9 @@ extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root);
 
 /* VM Hypervisor */
 extern int hypfs_vm_init(void);
+extern void hypfs_vm_exit(void);
 extern int hypfs_vm_create_files(struct super_block *sb, struct dentry *root);
 
+/* Directory for debugfs files */
+extern struct dentry *hypfs_dbfs_dir;
 #endif /* _HYPFS_H_ */
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 2b92d50..1211bb1 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -12,10 +12,10 @@
 
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/gfp.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <asm/ebcdic.h>
 #include "hypfs.h"
 
@@ -23,6 +23,8 @@
 #define CPU_NAME_LEN 16		/* type name len of cpus in diag224 name table */
 #define TMP_SIZE 64		/* size of temporary buffers */
 
+#define DBFS_D204_HDR_VERSION	0
+
 /* diag 204 subcodes */
 enum diag204_sc {
 	SUBC_STIB4 = 4,
@@ -48,6 +50,8 @@ static void *diag204_buf;		/* 4K aligned buffer for diag204 data */
 static void *diag204_buf_vmalloc;	/* vmalloc pointer for diag204 data */
 static int diag204_buf_pages;		/* number of pages for diag204 data */
 
+static struct dentry *dbfs_d204_file;
+
 /*
  * DIAG 204 data structures and member access functions.
  *
@@ -365,18 +369,21 @@ static void diag204_free_buffer(void)
 	} else {
 		free_pages((unsigned long) diag204_buf, 0);
 	}
-	diag204_buf_pages = 0;
 	diag204_buf = NULL;
 }
 
+static void *page_align_ptr(void *ptr)
+{
+	return (void *) PAGE_ALIGN((unsigned long) ptr);
+}
+
 static void *diag204_alloc_vbuf(int pages)
 {
 	/* The buffer has to be page aligned! */
 	diag204_buf_vmalloc = vmalloc(PAGE_SIZE * (pages + 1));
 	if (!diag204_buf_vmalloc)
 		return ERR_PTR(-ENOMEM);
-	diag204_buf = (void*)((unsigned long)diag204_buf_vmalloc
-				& ~0xfffUL) + 0x1000;
+	diag204_buf = page_align_ptr(diag204_buf_vmalloc);
 	diag204_buf_pages = pages;
 	return diag204_buf;
 }
@@ -469,17 +476,26 @@ fail_alloc:
 	return rc;
 }
 
+static int diag204_do_store(void *buf, int pages)
+{
+	int rc;
+
+	rc = diag204((unsigned long) diag204_store_sc |
+		     (unsigned long) diag204_info_type, pages, buf);
+	return rc < 0 ? -ENOSYS : 0;
+}
+
 static void *diag204_store(void)
 {
 	void *buf;
-	int pages;
+	int pages, rc;
 
 	buf = diag204_get_buffer(diag204_info_type, &pages);
 	if (IS_ERR(buf))
 		goto out;
-	if (diag204((unsigned long)diag204_store_sc |
-		    (unsigned long)diag204_info_type, pages, buf) < 0)
-		return ERR_PTR(-ENOSYS);
+	rc = diag204_do_store(buf, pages);
+	if (rc)
+		return ERR_PTR(rc);
 out:
 	return buf;
 }
@@ -488,7 +504,7 @@ out:
 
 static int diag224(void *ptr)
 {
-	int rc = -ENOTSUPP;
+	int rc = -EOPNOTSUPP;
 
 	asm volatile(
 		"	diag	%1,%2,0x224\n"
@@ -507,7 +523,7 @@ static int diag224_get_name_table(void)
 		return -ENOMEM;
 	if (diag224(diag224_cpu_names)) {
 		kfree(diag224_cpu_names);
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 	EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16);
 	return 0;
@@ -527,6 +543,92 @@ static int diag224_idx2name(int index, char *name)
 	return 0;
 }
 
+struct dbfs_d204_hdr {
+	u64	len;		/* Length of d204 buffer without header */
+	u16	version;	/* Version of header */
+	u8	sc;		/* Used subcode */
+	char	reserved[53];
+} __attribute__ ((packed));
+
+struct dbfs_d204 {
+	struct dbfs_d204_hdr	hdr;	/* 64 byte header */
+	char			buf[];	/* d204 buffer */
+} __attribute__ ((packed));
+
+struct dbfs_d204_private {
+	struct dbfs_d204	*d204;	/* Aligned d204 data with header */
+	void			*base;	/* Base pointer (needed for vfree) */
+};
+
+static int dbfs_d204_open(struct inode *inode, struct file *file)
+{
+	struct dbfs_d204_private *data;
+	struct dbfs_d204 *d204;
+	int rc, buf_size;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	buf_size = PAGE_SIZE * (diag204_buf_pages + 1) + sizeof(d204->hdr);
+	data->base = vmalloc(buf_size);
+	if (!data->base) {
+		rc = -ENOMEM;
+		goto fail_kfree_data;
+	}
+	memset(data->base, 0, buf_size);
+	d204 = page_align_ptr(data->base + sizeof(d204->hdr))
+		- sizeof(d204->hdr);
+	rc = diag204_do_store(&d204->buf, diag204_buf_pages);
+	if (rc)
+		goto fail_vfree_base;
+	d204->hdr.version = DBFS_D204_HDR_VERSION;
+	d204->hdr.len = PAGE_SIZE * diag204_buf_pages;
+	d204->hdr.sc = diag204_store_sc;
+	data->d204 = d204;
+	file->private_data = data;
+	return nonseekable_open(inode, file);
+
+fail_vfree_base:
+	vfree(data->base);
+fail_kfree_data:
+	kfree(data);
+	return rc;
+}
+
+static int dbfs_d204_release(struct inode *inode, struct file *file)
+{
+	struct dbfs_d204_private *data = file->private_data;
+
+	vfree(data->base);
+	kfree(data);
+	return 0;
+}
+
+static ssize_t dbfs_d204_read(struct file *file, char __user *buf,
+			      size_t size, loff_t *ppos)
+{
+	struct dbfs_d204_private *data = file->private_data;
+
+	return simple_read_from_buffer(buf, size, ppos, data->d204,
+				       data->d204->hdr.len +
+				       sizeof(data->d204->hdr));
+}
+
+static const struct file_operations dbfs_d204_ops = {
+	.open		= dbfs_d204_open,
+	.read		= dbfs_d204_read,
+	.release	= dbfs_d204_release,
+};
+
+static int hypfs_dbfs_init(void)
+{
+	dbfs_d204_file = debugfs_create_file("diag_204", 0400, hypfs_dbfs_dir,
+					     NULL, &dbfs_d204_ops);
+	if (IS_ERR(dbfs_d204_file))
+		return PTR_ERR(dbfs_d204_file);
+	return 0;
+}
+
 __init int hypfs_diag_init(void)
 {
 	int rc;
@@ -541,11 +643,17 @@ __init int hypfs_diag_init(void)
 		pr_err("The hardware system does not provide all "
 		       "functions required by hypfs\n");
 	}
+	if (diag204_info_type == INFO_EXT) {
+		rc = hypfs_dbfs_init();
+		if (rc)
+			diag204_free_buffer();
+	}
 	return rc;
 }
 
 void hypfs_diag_exit(void)
 {
+	debugfs_remove(dbfs_d204_file);
 	diag224_delete_name_table();
 	diag204_free_buffer();
 }
diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c
index f0b0d31..ee5ab1a 100644
--- a/arch/s390/hypfs/hypfs_vm.c
+++ b/arch/s390/hypfs/hypfs_vm.c
@@ -10,14 +10,18 @@
 #include <linux/string.h>
 #include <linux/vmalloc.h>
 #include <asm/ebcdic.h>
+#include <asm/timex.h>
 #include "hypfs.h"
 
 #define NAME_LEN 8
+#define DBFS_D2FC_HDR_VERSION 0
 
 static char local_guest[] = "        ";
 static char all_guests[] = "*       ";
 static char *guest_query;
 
+static struct dentry *dbfs_d2fc_file;
+
 struct diag2fc_data {
 	__u32 version;
 	__u32 flags;
@@ -76,23 +80,26 @@ static int diag2fc(int size, char* query, void *addr)
 		return -residual_cnt;
 }
 
-static struct diag2fc_data *diag2fc_store(char *query, int *count)
+/*
+ * Allocate buffer for "query" and store diag 2fc at "offset"
+ */
+static void *diag2fc_store(char *query, unsigned int *count, int offset)
 {
+	void *data;
 	int size;
-	struct diag2fc_data *data;
 
 	do {
 		size = diag2fc(0, query, NULL);
 		if (size < 0)
 			return ERR_PTR(-EACCES);
-		data = vmalloc(size);
+		data = vmalloc(size + offset);
 		if (!data)
 			return ERR_PTR(-ENOMEM);
-		if (diag2fc(size, query, data) == 0)
+		if (diag2fc(size, query, data + offset) == 0)
 			break;
 		vfree(data);
 	} while (1);
-	*count = (size / sizeof(*data));
+	*count = (size / sizeof(struct diag2fc_data));
 
 	return data;
 }
@@ -168,9 +175,10 @@ int hypfs_vm_create_files(struct super_block *sb, struct dentry *root)
 {
 	struct dentry *dir, *file;
 	struct diag2fc_data *data;
-	int rc, i, count = 0;
+	unsigned int count = 0;
+	int rc, i;
 
-	data = diag2fc_store(guest_query, &count);
+	data = diag2fc_store(guest_query, &count, 0);
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
@@ -218,8 +226,61 @@ failed:
 	return rc;
 }
 
+struct dbfs_d2fc_hdr {
+	u64	len;		/* Length of d2fc buffer without header */
+	u16	version;	/* Version of header */
+	char	tod_ext[16];	/* TOD clock for d2fc */
+	u64	count;		/* Number of VM guests in d2fc buffer */
+	char	reserved[30];
+} __attribute__ ((packed));
+
+struct dbfs_d2fc {
+	struct dbfs_d2fc_hdr	hdr;	/* 64 byte header */
+	char			buf[];	/* d2fc buffer */
+} __attribute__ ((packed));
+
+static int dbfs_d2fc_open(struct inode *inode, struct file *file)
+{
+	struct dbfs_d2fc *data;
+	unsigned int count;
+
+	data = diag2fc_store(guest_query, &count, sizeof(data->hdr));
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+	get_clock_ext(data->hdr.tod_ext);
+	data->hdr.len = count * sizeof(struct diag2fc_data);
+	data->hdr.version = DBFS_D2FC_HDR_VERSION;
+	data->hdr.count = count;
+	memset(&data->hdr.reserved, 0, sizeof(data->hdr.reserved));
+	file->private_data = data;
+	return nonseekable_open(inode, file);
+}
+
+static int dbfs_d2fc_release(struct inode *inode, struct file *file)
+{
+	diag2fc_free(file->private_data);
+	return 0;
+}
+
+static ssize_t dbfs_d2fc_read(struct file *file, char __user *buf,
+				    size_t size, loff_t *ppos)
+{
+	struct dbfs_d2fc *data = file->private_data;
+
+	return simple_read_from_buffer(buf, size, ppos, data, data->hdr.len +
+				       sizeof(struct dbfs_d2fc_hdr));
+}
+
+static const struct file_operations dbfs_d2fc_ops = {
+	.open		= dbfs_d2fc_open,
+	.read		= dbfs_d2fc_read,
+	.release	= dbfs_d2fc_release,
+};
+
 int hypfs_vm_init(void)
 {
+	if (!MACHINE_IS_VM)
+		return 0;
 	if (diag2fc(0, all_guests, NULL) > 0)
 		guest_query = all_guests;
 	else if (diag2fc(0, local_guest, NULL) > 0)
@@ -227,5 +288,17 @@ int hypfs_vm_init(void)
 	else
 		return -EACCES;
 
+	dbfs_d2fc_file = debugfs_create_file("diag_2fc", 0400, hypfs_dbfs_dir,
+					     NULL, &dbfs_d2fc_ops);
+	if (IS_ERR(dbfs_d2fc_file))
+		return PTR_ERR(dbfs_d2fc_file);
+
 	return 0;
 }
+
+void hypfs_vm_exit(void)
+{
+	if (!MACHINE_IS_VM)
+		return;
+	debugfs_remove(dbfs_d2fc_file);
+}
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 341aff2..6b120f0 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -14,8 +14,8 @@
 #include <linux/fs.h>
 #include <linux/namei.h>
 #include <linux/vfs.h>
+#include <linux/slab.h>
 #include <linux/pagemap.h>
-#include <linux/gfp.h>
 #include <linux/time.h>
 #include <linux/parser.h>
 #include <linux/sysfs.h>
@@ -46,6 +46,8 @@ static const struct super_operations hypfs_s_ops;
 /* start of list of all dentries, which have to be deleted on update */
 static struct dentry *hypfs_last_dentry;
 
+struct dentry *hypfs_dbfs_dir;
+
 static void hypfs_update_update(struct super_block *sb)
 {
 	struct hypfs_sb_info *sb_info = sb->s_fs_info;
@@ -145,7 +147,7 @@ static int hypfs_open(struct inode *inode, struct file *filp)
 		}
 		mutex_unlock(&fs_info->lock);
 	}
-	return 0;
+	return nonseekable_open(inode, filp);
 }
 
 static ssize_t hypfs_aio_read(struct kiocb *iocb, const struct iovec *iov,
@@ -288,46 +290,30 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
 	sb->s_magic = HYPFS_MAGIC;
 	sb->s_op = &hypfs_s_ops;
-	if (hypfs_parse_options(data, sb)) {
-		rc = -EINVAL;
-		goto err_alloc;
-	}
+	if (hypfs_parse_options(data, sb))
+		return -EINVAL;
 	root_inode = hypfs_make_inode(sb, S_IFDIR | 0755);
-	if (!root_inode) {
-		rc = -ENOMEM;
-		goto err_alloc;
-	}
+	if (!root_inode)
+		return -ENOMEM;
 	root_inode->i_op = &simple_dir_inode_operations;
 	root_inode->i_fop = &simple_dir_operations;
-	root_dentry = d_alloc_root(root_inode);
+	sb->s_root = root_dentry = d_alloc_root(root_inode);
 	if (!root_dentry) {
 		iput(root_inode);
-		rc = -ENOMEM;
-		goto err_alloc;
+		return -ENOMEM;
 	}
 	if (MACHINE_IS_VM)
 		rc = hypfs_vm_create_files(sb, root_dentry);
 	else
 		rc = hypfs_diag_create_files(sb, root_dentry);
 	if (rc)
-		goto err_tree;
+		return rc;
 	sbi->update_file = hypfs_create_update_file(sb, root_dentry);
-	if (IS_ERR(sbi->update_file)) {
-		rc = PTR_ERR(sbi->update_file);
-		goto err_tree;
-	}
+	if (IS_ERR(sbi->update_file))
+		return PTR_ERR(sbi->update_file);
 	hypfs_update_update(sb);
-	sb->s_root = root_dentry;
 	pr_info("Hypervisor filesystem mounted\n");
 	return 0;
-
-err_tree:
-	hypfs_delete_tree(root_dentry);
-	d_genocide(root_dentry);
-	dput(root_dentry);
-err_alloc:
-	kfree(sbi);
-	return rc;
 }
 
 static int hypfs_get_super(struct file_system_type *fst, int flags,
@@ -340,12 +326,12 @@ static void hypfs_kill_super(struct super_block *sb)
 {
 	struct hypfs_sb_info *sb_info = sb->s_fs_info;
 
-	if (sb->s_root) {
+	if (sb->s_root)
 		hypfs_delete_tree(sb->s_root);
+	if (sb_info->update_file)
 		hypfs_remove(sb_info->update_file);
-		kfree(sb->s_fs_info);
-		sb->s_fs_info = NULL;
-	}
+	kfree(sb->s_fs_info);
+	sb->s_fs_info = NULL;
 	kill_litter_super(sb);
 }
 
@@ -484,20 +470,22 @@ static int __init hypfs_init(void)
 {
 	int rc;
 
-	if (MACHINE_IS_VM) {
-		if (hypfs_vm_init())
-			/* no diag 2fc, just exit */
-			return -ENODATA;
-	} else {
-		if (hypfs_diag_init()) {
-			rc = -ENODATA;
-			goto fail_diag;
-		}
+	hypfs_dbfs_dir = debugfs_create_dir("s390_hypfs", NULL);
+	if (IS_ERR(hypfs_dbfs_dir))
+		return PTR_ERR(hypfs_dbfs_dir);
+
+	if (hypfs_diag_init()) {
+		rc = -ENODATA;
+		goto fail_debugfs_remove;
+	}
+	if (hypfs_vm_init()) {
+		rc = -ENODATA;
+		goto fail_hypfs_diag_exit;
 	}
 	s390_kobj = kobject_create_and_add("s390", hypervisor_kobj);
 	if (!s390_kobj) {
 		rc = -ENOMEM;
-		goto fail_sysfs;
+		goto fail_hypfs_vm_exit;
 	}
 	rc = register_filesystem(&hypfs_type);
 	if (rc)
@@ -506,18 +494,22 @@ static int __init hypfs_init(void)
 
 fail_filesystem:
 	kobject_put(s390_kobj);
-fail_sysfs:
-	if (!MACHINE_IS_VM)
-		hypfs_diag_exit();
-fail_diag:
+fail_hypfs_vm_exit:
+	hypfs_vm_exit();
+fail_hypfs_diag_exit:
+	hypfs_diag_exit();
+fail_debugfs_remove:
+	debugfs_remove(hypfs_dbfs_dir);
+
 	pr_err("Initialization of hypfs failed with rc=%i\n", rc);
 	return rc;
 }
 
 static void __exit hypfs_exit(void)
 {
-	if (!MACHINE_IS_VM)
-		hypfs_diag_exit();
+	hypfs_diag_exit();
+	hypfs_vm_exit();
+	debugfs_remove(hypfs_dbfs_dir);
 	unregister_filesystem(&hypfs_type);
 	kobject_put(s390_kobj);
 }
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 2a113d6..76daea1 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -15,11 +15,10 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <asm/system.h>
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 #define __CS_LOOP(ptr, op_val, op_string) ({				\
 	int old_val, new_val;						\
 	asm volatile(							\
@@ -35,26 +34,6 @@
 	new_val;							\
 })
 
-#else /* __GNUC__ */
-
-#define __CS_LOOP(ptr, op_val, op_string) ({				\
-	int old_val, new_val;						\
-	asm volatile(							\
-		"	l	%0,0(%3)\n"				\
-		"0:	lr	%1,%0\n"				\
-		op_string "	%1,%4\n"				\
-		"	cs	%0,%1,0(%3)\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=m" (((atomic_t *)(ptr))->counter)			\
-		: "a" (ptr), "d" (op_val),				\
-		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory");					\
-	new_val;							\
-})
-
-#endif /* __GNUC__ */
-
 static inline int atomic_read(const atomic_t *v)
 {
 	barrier();
@@ -101,19 +80,11 @@ static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
 
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 	asm volatile(
 		"	cs	%0,%2,%1"
 		: "+d" (old), "=Q" (v->counter)
 		: "d" (new), "Q" (v->counter)
 		: "cc", "memory");
-#else /* __GNUC__ */
-	asm volatile(
-		"	cs	%0,%3,0(%2)"
-		: "+d" (old), "=m" (v->counter)
-		: "a" (v), "d" (new), "m" (v->counter)
-		: "cc", "memory");
-#endif /* __GNUC__ */
 	return old;
 }
 
@@ -140,8 +111,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 #ifdef CONFIG_64BIT
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 #define __CSG_LOOP(ptr, op_val, op_string) ({				\
 	long long old_val, new_val;					\
 	asm volatile(							\
@@ -157,26 +126,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 	new_val;							\
 })
 
-#else /* __GNUC__ */
-
-#define __CSG_LOOP(ptr, op_val, op_string) ({				\
-	long long old_val, new_val;					\
-	asm volatile(							\
-		"	lg	%0,0(%3)\n"				\
-		"0:	lgr	%1,%0\n"				\
-		op_string "	%1,%4\n"				\
-		"	csg	%0,%1,0(%3)\n"				\
-		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=m" (((atomic_t *)(ptr))->counter)			\
-		: "a" (ptr), "d" (op_val),				\
-		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory");					\
-	new_val;							\
-})
-
-#endif /* __GNUC__ */
-
 static inline long long atomic64_read(const atomic64_t *v)
 {
 	barrier();
@@ -214,19 +163,11 @@ static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
 static inline long long atomic64_cmpxchg(atomic64_t *v,
 					     long long old, long long new)
 {
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 	asm volatile(
 		"	csg	%0,%2,%1"
 		: "+d" (old), "=Q" (v->counter)
 		: "d" (new), "Q" (v->counter)
 		: "cc", "memory");
-#else /* __GNUC__ */
-	asm volatile(
-		"	csg	%0,%3,0(%2)"
-		: "+d" (old), "=m" (v->counter)
-		: "a" (v), "d" (new), "m" (v->counter)
-		: "cc", "memory");
-#endif /* __GNUC__ */
 	return old;
 }
 
@@ -243,10 +184,8 @@ static inline long long atomic64_read(const atomic64_t *v)
 	register_pair rp;
 
 	asm volatile(
-		"	lm	%0,%N0,0(%1)"
-		: "=&d" (rp)
-		: "a" (&v->counter), "m" (v->counter)
-		);
+		"	lm	%0,%N0,%1"
+		: "=&d" (rp) : "Q" (v->counter)	);
 	return rp.pair;
 }
 
@@ -255,10 +194,8 @@ static inline void atomic64_set(atomic64_t *v, long long i)
 	register_pair rp = {.pair = i};
 
 	asm volatile(
-		"	stm	%1,%N1,0(%2)"
-		: "=m" (v->counter)
-		: "d" (rp), "a" (&v->counter)
-		);
+		"	stm	%1,%N1,%0"
+		: "=Q" (v->counter) : "d" (rp) );
 }
 
 static inline long long atomic64_xchg(atomic64_t *v, long long new)
@@ -267,11 +204,11 @@ static inline long long atomic64_xchg(atomic64_t *v, long long new)
 	register_pair rp_old;
 
 	asm volatile(
-		"	lm	%0,%N0,0(%2)\n"
-		"0:	cds	%0,%3,0(%2)\n"
+		"	lm	%0,%N0,%1\n"
+		"0:	cds	%0,%2,%1\n"
 		"	jl	0b\n"
-		: "=&d" (rp_old), "+m" (v->counter)
-		: "a" (&v->counter), "d" (rp_new)
+		: "=&d" (rp_old), "=Q" (v->counter)
+		: "d" (rp_new), "Q" (v->counter)
 		: "cc");
 	return rp_old.pair;
 }
@@ -283,9 +220,9 @@ static inline long long atomic64_cmpxchg(atomic64_t *v,
 	register_pair rp_new = {.pair = new};
 
 	asm volatile(
-		"	cds	%0,%3,0(%2)"
-		: "+&d" (rp_old), "+m" (v->counter)
-		: "a" (&v->counter), "d" (rp_new)
+		"	cds	%0,%2,%1"
+		: "+&d" (rp_old), "=Q" (v->counter)
+		: "d" (rp_new), "Q" (v->counter)
 		: "cc");
 	return rp_old.pair;
 }
@@ -338,6 +275,7 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
 static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
 	long long c, old;
+
 	c = atomic64_read(v);
 	for (;;) {
 		if (unlikely(c == u))
@@ -350,6 +288,23 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 	return c != u;
 }
 
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long c, old, dec;
+
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
 #define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
 #define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
 #define atomic64_inc(_v)		atomic64_add_return(1, _v)
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index b30606f..2e05972 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -71,8 +71,6 @@ extern const char _sb_findmap[];
 #define __BITOPS_AND		"nr"
 #define __BITOPS_XOR		"xr"
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 #define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
 	asm volatile(						\
 		"	l	%0,%2\n"			\
@@ -85,22 +83,6 @@ extern const char _sb_findmap[];
 		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
 		: "cc");
 
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	l	%0,0(%4)\n"			\
-		"0:	lr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	cs	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-#endif /* __GNUC__ */
-
 #else /* __s390x__ */
 
 #define __BITOPS_ALIGN		7
@@ -109,8 +91,6 @@ extern const char _sb_findmap[];
 #define __BITOPS_AND		"ngr"
 #define __BITOPS_XOR		"xgr"
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 #define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
 	asm volatile(						\
 		"	lg	%0,%2\n"			\
@@ -123,23 +103,6 @@ extern const char _sb_findmap[];
 		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
 		: "cc");
 
-#else /* __GNUC__ */
-
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
-	asm volatile(						\
-		"	lg	%0,0(%4)\n"			\
-		"0:	lgr	%1,%0\n"			\
-		__op_string "	%1,%3\n"			\
-		"	csg	%0,%1,0(%4)\n"			\
-		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=m" (*(unsigned long *) __addr)		\
-		: "d" (__val), "a" (__addr),			\
-		  "m" (*(unsigned long *) __addr) : "cc");
-
-
-#endif /* __GNUC__ */
-
 #endif /* __s390x__ */
 
 #define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
@@ -261,9 +224,8 @@ static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
 
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr) : "a" (addr),
-		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+		"	oc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" );
 }
 
 static inline void 
@@ -290,9 +252,8 @@ __clear_bit(unsigned long nr, volatile unsigned long *ptr)
 
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)	: "a" (addr),
-		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
+		"	nc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) : "cc" );
 }
 
 static inline void 
@@ -318,9 +279,8 @@ static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
 
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		:  "=m" (*(char *) addr) : "a" (addr),
-		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+		"	xc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" );
 }
 
 static inline void 
@@ -349,10 +309,9 @@ test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	ch = *(unsigned char *) addr;
 	asm volatile(
-		"	oc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
+		"	oc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
+		: "cc", "memory");
 	return (ch >> (nr & 7)) & 1;
 }
 #define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
@@ -369,10 +328,9 @@ test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	ch = *(unsigned char *) addr;
 	asm volatile(
-		"	nc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
+		"	nc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr)	: "Q" (_ni_bitmap[nr & 7])
+		: "cc", "memory");
 	return (ch >> (nr & 7)) & 1;
 }
 #define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
@@ -389,10 +347,9 @@ test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
 	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
 	ch = *(unsigned char *) addr;
 	asm volatile(
-		"	xc	0(1,%1),0(%2)"
-		: "=m" (*(char *) addr)
-		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
-		  "m" (*(char *) addr) : "cc", "memory");
+		"	xc	%O0(1,%R0),%1"
+		: "=Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
+		: "cc", "memory");
 	return (ch >> (nr & 7)) & 1;
 }
 #define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
@@ -591,11 +548,11 @@ static inline unsigned long __load_ulong_le(const unsigned long *p,
 	p = (unsigned long *)((unsigned long) p + offset);
 #ifndef __s390x__
 	asm volatile(
-		"	ic	%0,0(%1)\n"
-		"	icm	%0,2,1(%1)\n"
-		"	icm	%0,4,2(%1)\n"
-		"	icm	%0,8,3(%1)"
-		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
+		"	ic	%0,%O1(%R1)\n"
+		"	icm	%0,2,%O1+1(%R1)\n"
+		"	icm	%0,4,%O1+2(%R1)\n"
+		"	icm	%0,8,%O1+3(%R1)"
+		: "=&d" (word) : "Q" (*p) : "cc");
 #else
 	asm volatile(
 		"	lrvg	%0,%1"
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index b1066b9..bf90d1f 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -5,12 +5,6 @@
 
 #ifdef CONFIG_BUG
 
-#ifdef CONFIG_64BIT
-#define S390_LONG ".quad"
-#else
-#define S390_LONG ".long"
-#endif
-
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 
 #define __EMIT_BUG(x) do {					\
@@ -21,7 +15,7 @@
 		"2:	.asciz	\""__FILE__"\"\n"		\
 		".previous\n"					\
 		".section __bug_table,\"a\"\n"			\
-		"3:\t"	S390_LONG "\t1b,2b\n"			\
+		"3:	.long	1b-3b,2b-3b\n"			\
 		"	.short	%0,%1\n"			\
 		"	.org	3b+%2\n"			\
 		".previous\n"					\
@@ -37,7 +31,7 @@
 		"0:	j	0b+2\n"			\
 		"1:\n"					\
 		".section __bug_table,\"a\"\n"		\
-		"2:\t"	S390_LONG "\t1b\n"		\
+		"2:	.long	1b-2b\n"		\
 		"	.short	%0\n"			\
 		"	.org	2b+%1\n"		\
 		".previous\n"				\
@@ -52,18 +46,18 @@
 	unreachable();					\
 } while (0)
 
-#define __WARN() do {					\
-	__EMIT_BUG(BUGFLAG_WARNING);			\
+#define __WARN_TAINT(taint) do {			\
+	__EMIT_BUG(BUGFLAG_TAINT(taint));		\
 } while (0)
 
 #define WARN_ON(x) ({					\
 	int __ret_warn_on = !!(x);			\
 	if (__builtin_constant_p(__ret_warn_on)) {	\
 		if (__ret_warn_on)			\
-			__EMIT_BUG(BUGFLAG_WARNING);	\
+			__WARN();			\
 	} else {					\
 		if (unlikely(__ret_warn_on))		\
-			__EMIT_BUG(BUGFLAG_WARNING);	\
+			__WARN();			\
 	}						\
 	unlikely(__ret_warn_on);			\
 })
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index f4bd346..1c0030f 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -91,6 +91,14 @@ struct ccw_device {
 	void (*handler) (struct ccw_device *, unsigned long, struct irb *);
 };
 
+/*
+ * Possible CIO actions triggered by the unit check handler.
+ */
+enum uc_todo {
+	UC_TODO_RETRY,
+	UC_TODO_RETRY_ON_NEW_PATH,
+	UC_TODO_STOP
+};
 
 /**
  * struct ccw driver - device driver for channel attached devices
@@ -107,6 +115,7 @@ struct ccw_device {
  * @freeze: callback for freezing during hibernation snapshotting
  * @thaw: undo work done in @freeze
  * @restore: callback for restoring after hibernation
+ * @uc_handler: callback for unit check handler
  * @driver: embedded device driver structure
  * @name: device driver name
  */
@@ -124,6 +133,7 @@ struct ccw_driver {
 	int (*freeze)(struct ccw_device *);
 	int (*thaw) (struct ccw_device *);
 	int (*restore)(struct ccw_device *);
+	enum uc_todo (*uc_handler) (struct ccw_device *, struct irb *);
 	struct device_driver driver;
 	char *name;
 };
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679a..e34347d 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
 /**
  * struct ccw1 - channel command word
  * @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
  * @count: byte count
  * @cda: data address
  *
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 01a0802..104f200 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -35,7 +35,8 @@
 
 extern long psw32_user_bits;
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"s390\0\0\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 258ba88..8b1a52a 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -188,15 +188,16 @@ struct s390_idle_data {
 
 DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
 
-void vtime_start_cpu(void);
+void vtime_start_cpu(__u64 int_clock, __u64 enter_timer);
 cputime64_t s390_get_idle_time(int cpu);
 
 #define arch_idle_time(cpu) s390_get_idle_time(cpu)
 
-static inline void s390_idle_check(void)
+static inline void s390_idle_check(struct pt_regs *regs, __u64 int_clock,
+				   __u64 enter_timer)
 {
-	if ((&__get_cpu_var(s390_idle))->idle_enter != 0ULL)
-		vtime_start_cpu();
+	if (regs->psw.mask & PSW_MASK_WAIT)
+		vtime_start_cpu(int_clock, enter_timer);
 }
 
 static inline int s390_nohz_delay(int cpu)
diff --git a/arch/s390/include/asm/crw.h b/arch/s390/include/asm/crw.h
index 2185a6d..749a97e 100644
--- a/arch/s390/include/asm/crw.h
+++ b/arch/s390/include/asm/crw.h
@@ -32,6 +32,7 @@ typedef void (*crw_handler_t)(struct crw *, struct crw *, int);
 extern int crw_register_handler(int rsc, crw_handler_t handler);
 extern void crw_unregister_handler(int rsc);
 extern void crw_handle_channel_report(void);
+void crw_wait_for_channel_report(void);
 
 #define NR_RSCS 16
 
diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h
index 80ef58c..538e1b3 100644
--- a/arch/s390/include/asm/etr.h
+++ b/arch/s390/include/asm/etr.h
@@ -145,11 +145,11 @@ static inline int etr_setr(struct etr_eacr *ctrl)
 	int rc = -ENOSYS;
 
 	asm volatile(
-		"	.insn	s,0xb2160000,0(%2)\n"
+		"	.insn	s,0xb2160000,%1\n"
 		"0:	la	%0,0\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*ctrl), "a" (ctrl));
+		: "+d" (rc) : "Q" (*ctrl));
 	return rc;
 }
 
@@ -159,11 +159,11 @@ static inline int etr_stetr(struct etr_aib *aib)
 	int rc = -ENOSYS;
 
 	asm volatile(
-		"	.insn	s,0xb2170000,0(%2)\n"
+		"	.insn	s,0xb2170000,%1\n"
 		"0:	la	%0,0\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*aib), "a" (aib));
+		: "+d" (rc) : "Q" (*aib));
 	return rc;
 }
 
@@ -174,11 +174,11 @@ static inline int etr_steai(struct etr_aib *aib, unsigned int func)
 	int rc = -ENOSYS;
 
 	asm volatile(
-		"	.insn	s,0xb2b30000,0(%2)\n"
+		"	.insn	s,0xb2b30000,%1\n"
 		"0:	la	%0,0\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0));
+		: "+d" (rc) : "Q" (*aib), "d" (reg0));
 	return rc;
 }
 
diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h
index c2fb432..15b3ac2 100644
--- a/arch/s390/include/asm/irqflags.h
+++ b/arch/s390/include/asm/irqflags.h
@@ -8,8 +8,6 @@
 
 #include <linux/types.h>
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 /* store then or system mask. */
 #define __raw_local_irq_stosm(__or)					\
 ({									\
@@ -36,40 +34,6 @@
 	asm volatile("ssm   %0" : : "Q" (__mask) : "memory");		\
 })
 
-#else /* __GNUC__ */
-
-/* store then or system mask. */
-#define __raw_local_irq_stosm(__or)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stosm	0(%1),%2"				\
-		: "=m" (__mask)						\
-		: "a" (&__mask), "i" (__or) : "memory");		\
-	__mask;								\
-})
-
-/* store then and system mask. */
-#define __raw_local_irq_stnsm(__and)					\
-({									\
-	unsigned long __mask;						\
-	asm volatile(							\
-		"	stnsm	0(%1),%2"				\
-		: "=m" (__mask)						\
-		: "a" (&__mask), "i" (__and) : "memory");		\
-	__mask;								\
-})
-
-/* set system mask. */
-#define __raw_local_irq_ssm(__mask)					\
-({									\
-	asm volatile(							\
-		"	ssm	0(%0)"					\
-		: : "a" (&__mask), "m" (__mask) : "memory");		\
-})
-
-#endif /* __GNUC__ */
-
 /* interrupt control.. */
 static inline unsigned long raw_local_irq_enable(void)
 {
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index f2ef4b6..0f97ef2 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -1,141 +1,16 @@
 /*
- *  include/asm-s390/lowcore.h
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Hartmut Penner (hp@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *    Copyright IBM Corp. 1999,2010
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Denis Joseph Barrow,
  */
 
 #ifndef _ASM_S390_LOWCORE_H
 #define _ASM_S390_LOWCORE_H
 
-#define __LC_IPL_PARMBLOCK_PTR		0x0014
-#define __LC_EXT_PARAMS			0x0080
-#define __LC_CPU_ADDRESS		0x0084
-#define __LC_EXT_INT_CODE		0x0086
-
-#define __LC_SVC_ILC			0x0088
-#define __LC_SVC_INT_CODE		0x008a
-#define __LC_PGM_ILC			0x008c
-#define __LC_PGM_INT_CODE		0x008e
-
-#define __LC_PER_ATMID			0x0096
-#define __LC_PER_ADDRESS		0x0098
-#define __LC_PER_ACCESS_ID		0x00a1
-#define __LC_AR_MODE_ID			0x00a3
-
-#define __LC_SUBCHANNEL_ID		0x00b8
-#define __LC_SUBCHANNEL_NR		0x00ba
-#define __LC_IO_INT_PARM		0x00bc
-#define __LC_IO_INT_WORD		0x00c0
-#define __LC_STFL_FAC_LIST		0x00c8
-#define __LC_MCCK_CODE			0x00e8
-
-#define __LC_DUMP_REIPL			0x0e00
-
-#ifndef __s390x__
-#define __LC_EXT_OLD_PSW		0x0018
-#define __LC_SVC_OLD_PSW		0x0020
-#define __LC_PGM_OLD_PSW		0x0028
-#define __LC_MCK_OLD_PSW		0x0030
-#define __LC_IO_OLD_PSW			0x0038
-#define __LC_EXT_NEW_PSW		0x0058
-#define __LC_SVC_NEW_PSW		0x0060
-#define __LC_PGM_NEW_PSW		0x0068
-#define __LC_MCK_NEW_PSW		0x0070
-#define __LC_IO_NEW_PSW			0x0078
-#define __LC_SAVE_AREA			0x0200
-#define __LC_RETURN_PSW			0x0240
-#define __LC_RETURN_MCCK_PSW		0x0248
-#define __LC_SYNC_ENTER_TIMER		0x0250
-#define __LC_ASYNC_ENTER_TIMER		0x0258
-#define __LC_EXIT_TIMER			0x0260
-#define __LC_USER_TIMER			0x0268
-#define __LC_SYSTEM_TIMER		0x0270
-#define __LC_STEAL_TIMER		0x0278
-#define __LC_LAST_UPDATE_TIMER		0x0280
-#define __LC_LAST_UPDATE_CLOCK		0x0288
-#define __LC_CURRENT			0x0290
-#define __LC_THREAD_INFO		0x0294
-#define __LC_KERNEL_STACK		0x0298
-#define __LC_ASYNC_STACK		0x029c
-#define __LC_PANIC_STACK		0x02a0
-#define __LC_KERNEL_ASCE		0x02a4
-#define __LC_USER_ASCE			0x02a8
-#define __LC_USER_EXEC_ASCE		0x02ac
-#define __LC_CPUID			0x02b0
-#define __LC_INT_CLOCK			0x02c8
-#define __LC_MACHINE_FLAGS		0x02d8
-#define __LC_FTRACE_FUNC		0x02dc
-#define __LC_IRB			0x0300
-#define __LC_PFAULT_INTPARM		0x0080
-#define __LC_CPU_TIMER_SAVE_AREA	0x00d8
-#define __LC_CLOCK_COMP_SAVE_AREA	0x00e0
-#define __LC_PSW_SAVE_AREA		0x0100
-#define __LC_PREFIX_SAVE_AREA		0x0108
-#define __LC_AREGS_SAVE_AREA		0x0120
-#define __LC_FPREGS_SAVE_AREA		0x0160
-#define __LC_GPREGS_SAVE_AREA		0x0180
-#define __LC_CREGS_SAVE_AREA		0x01c0
-#else /* __s390x__ */
-#define __LC_LAST_BREAK			0x0110
-#define __LC_EXT_OLD_PSW		0x0130
-#define __LC_SVC_OLD_PSW		0x0140
-#define __LC_PGM_OLD_PSW		0x0150
-#define __LC_MCK_OLD_PSW		0x0160
-#define __LC_IO_OLD_PSW			0x0170
-#define __LC_RESTART_PSW		0x01a0
-#define __LC_EXT_NEW_PSW		0x01b0
-#define __LC_SVC_NEW_PSW		0x01c0
-#define __LC_PGM_NEW_PSW		0x01d0
-#define __LC_MCK_NEW_PSW		0x01e0
-#define __LC_IO_NEW_PSW			0x01f0
-#define __LC_SAVE_AREA			0x0200
-#define __LC_RETURN_PSW			0x0280
-#define __LC_RETURN_MCCK_PSW		0x0290
-#define __LC_SYNC_ENTER_TIMER		0x02a0
-#define __LC_ASYNC_ENTER_TIMER		0x02a8
-#define __LC_EXIT_TIMER			0x02b0
-#define __LC_USER_TIMER			0x02b8
-#define __LC_SYSTEM_TIMER		0x02c0
-#define __LC_STEAL_TIMER		0x02c8
-#define __LC_LAST_UPDATE_TIMER		0x02d0
-#define __LC_LAST_UPDATE_CLOCK		0x02d8
-#define __LC_CURRENT			0x02e0
-#define __LC_THREAD_INFO		0x02e8
-#define __LC_KERNEL_STACK		0x02f0
-#define __LC_ASYNC_STACK		0x02f8
-#define __LC_PANIC_STACK		0x0300
-#define __LC_KERNEL_ASCE		0x0308
-#define __LC_USER_ASCE			0x0310
-#define __LC_USER_EXEC_ASCE		0x0318
-#define __LC_CPUID			0x0320
-#define __LC_INT_CLOCK			0x0340
-#define __LC_VDSO_PER_CPU		0x0350
-#define __LC_MACHINE_FLAGS		0x0358
-#define __LC_FTRACE_FUNC		0x0360
-#define __LC_IRB			0x0380
-#define __LC_PASTE			0x03c0
-#define __LC_PFAULT_INTPARM		0x11b8
-#define __LC_FPREGS_SAVE_AREA		0x1200
-#define __LC_GPREGS_SAVE_AREA		0x1280
-#define __LC_PSW_SAVE_AREA		0x1300
-#define __LC_PREFIX_SAVE_AREA		0x1318
-#define __LC_FP_CREG_SAVE_AREA		0x131c
-#define __LC_TODREG_SAVE_AREA		0x1324
-#define __LC_CPU_TIMER_SAVE_AREA	0x1328
-#define __LC_CLOCK_COMP_SAVE_AREA	0x1331
-#define __LC_AREGS_SAVE_AREA		0x1340
-#define __LC_CREGS_SAVE_AREA		0x1380
-#endif /* __s390x__ */
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cpu.h>
-#include <asm/ptrace.h>
 #include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/cpu.h>
 
 void restart_int_handler(void);
 void ext_int_handler(void);
@@ -144,7 +19,12 @@ void pgm_check_handler(void);
 void mcck_int_handler(void);
 void io_int_handler(void);
 
-struct save_area_s390 {
+#ifdef CONFIG_32BIT
+
+#define LC_ORDER 0
+#define LC_PAGES 1
+
+struct save_area {
 	u32	ext_save;
 	u64	timer;
 	u64	clk_cmp;
@@ -156,54 +36,13 @@ struct save_area_s390 {
 	u64	fp_regs[4];
 	u32	gp_regs[16];
 	u32	ctrl_regs[16];
-}  __attribute__((packed));
-
-struct save_area_s390x {
-	u64	fp_regs[16];
-	u64	gp_regs[16];
-	u8	psw[16];
-	u8	pad1[8];
-	u32	pref_reg;
-	u32	fp_ctrl_reg;
-	u8	pad2[4];
-	u32	tod_reg;
-	u64	timer;
-	u64	clk_cmp;
-	u8	pad3[8];
-	u32	acc_regs[16];
-	u64	ctrl_regs[16];
-}  __attribute__((packed));
-
-union save_area {
-	struct save_area_s390	s390;
-	struct save_area_s390x	s390x;
-};
-
-#define SAVE_AREA_BASE_S390	0xd4
-#define SAVE_AREA_BASE_S390X	0x1200
-
-#ifndef __s390x__
-#define SAVE_AREA_SIZE sizeof(struct save_area_s390)
-#define SAVE_AREA_BASE SAVE_AREA_BASE_S390
-#else
-#define SAVE_AREA_SIZE sizeof(struct save_area_s390x)
-#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X
-#endif
-
-#ifndef __s390x__
-#define LC_ORDER 0
-#else
-#define LC_ORDER 1
-#endif
-
-#define LC_PAGES (1UL << LC_ORDER)
+} __packed;
 
-struct _lowcore
-{
-#ifndef __s390x__
-	/* 0x0000 - 0x01ff: defined by architecture */
+struct _lowcore {
 	psw_t	restart_psw;			/* 0x0000 */
-	__u32	ccw2[4];			/* 0x0008 */
+	psw_t	restart_old_psw;		/* 0x0008 */
+	__u8	pad_0x0010[0x0014-0x0010];	/* 0x0010 */
+	__u32	ipl_parmblock_ptr;		/* 0x0014 */
 	psw_t	external_old_psw;		/* 0x0018 */
 	psw_t	svc_old_psw;			/* 0x0020 */
 	psw_t	program_old_psw;		/* 0x0028 */
@@ -229,7 +68,9 @@ struct _lowcore
 	__u32	monitor_code;			/* 0x009c */
 	__u8	exc_access_id;			/* 0x00a0 */
 	__u8	per_access_id;			/* 0x00a1 */
-	__u8	pad_0x00a2[0x00b8-0x00a2];	/* 0x00a2 */
+	__u8	op_access_id;			/* 0x00a2 */
+	__u8	ar_access_id;			/* 0x00a3 */
+	__u8	pad_0x00a4[0x00b8-0x00a4];	/* 0x00a4 */
 	__u16	subchannel_id;			/* 0x00b8 */
 	__u16	subchannel_nr;			/* 0x00ba */
 	__u32	io_int_parm;			/* 0x00bc */
@@ -245,8 +86,9 @@ struct _lowcore
 	__u32	external_damage_code;		/* 0x00f4 */
 	__u32	failing_storage_address;	/* 0x00f8 */
 	__u8	pad_0x00fc[0x0100-0x00fc];	/* 0x00fc */
-	__u32	st_status_fixed_logout[4];	/* 0x0100 */
-	__u8	pad_0x0110[0x0120-0x0110];	/* 0x0110 */
+	psw_t	psw_save_area;			/* 0x0100 */
+	__u32	prefixreg_save_area;		/* 0x0108 */
+	__u8	pad_0x010c[0x0120-0x010c];	/* 0x010c */
 
 	/* CPU register save area: defined by architecture */
 	__u32	access_regs_save_area[16];	/* 0x0120 */
@@ -262,43 +104,44 @@ struct _lowcore
 	/* CPU time accounting values */
 	__u64	sync_enter_timer;		/* 0x0250 */
 	__u64	async_enter_timer;		/* 0x0258 */
-	__u64	exit_timer;			/* 0x0260 */
-	__u64	user_timer;			/* 0x0268 */
-	__u64	system_timer;			/* 0x0270 */
-	__u64	steal_timer;			/* 0x0278 */
-	__u64	last_update_timer;		/* 0x0280 */
-	__u64	last_update_clock;		/* 0x0288 */
+	__u64	mcck_enter_timer;		/* 0x0260 */
+	__u64	exit_timer;			/* 0x0268 */
+	__u64	user_timer;			/* 0x0270 */
+	__u64	system_timer;			/* 0x0278 */
+	__u64	steal_timer;			/* 0x0280 */
+	__u64	last_update_timer;		/* 0x0288 */
+	__u64	last_update_clock;		/* 0x0290 */
 
 	/* Current process. */
-	__u32	current_task;			/* 0x0290 */
-	__u32	thread_info;			/* 0x0294 */
-	__u32	kernel_stack;			/* 0x0298 */
+	__u32	current_task;			/* 0x0298 */
+	__u32	thread_info;			/* 0x029c */
+	__u32	kernel_stack;			/* 0x02a0 */
 
 	/* Interrupt and panic stack. */
-	__u32	async_stack;			/* 0x029c */
-	__u32	panic_stack;			/* 0x02a0 */
+	__u32	async_stack;			/* 0x02a4 */
+	__u32	panic_stack;			/* 0x02a8 */
 
 	/* Address space pointer. */
-	__u32	kernel_asce;			/* 0x02a4 */
-	__u32	user_asce;			/* 0x02a8 */
-	__u32	user_exec_asce;			/* 0x02ac */
+	__u32	kernel_asce;			/* 0x02ac */
+	__u32	user_asce;			/* 0x02b0 */
+	__u32	user_exec_asce;			/* 0x02b4 */
 
 	/* SMP info area */
-	struct cpuid cpu_id;			/* 0x02b0 */
 	__u32	cpu_nr;				/* 0x02b8 */
 	__u32	softirq_pending;		/* 0x02bc */
 	__u32	percpu_offset;			/* 0x02c0 */
 	__u32	ext_call_fast;			/* 0x02c4 */
 	__u64	int_clock;			/* 0x02c8 */
-	__u64	clock_comparator;		/* 0x02d0 */
-	__u32	machine_flags;			/* 0x02d8 */
-	__u32	ftrace_func;			/* 0x02dc */
-	__u8	pad_0x02f0[0x0300-0x02f0];	/* 0x02f0 */
+	__u64	mcck_clock;			/* 0x02d0 */
+	__u64	clock_comparator;		/* 0x02d8 */
+	__u32	machine_flags;			/* 0x02e0 */
+	__u32	ftrace_func;			/* 0x02e4 */
+	__u8	pad_0x02e8[0x0300-0x02e8];	/* 0x02e8 */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
 
-	__u8	pad_0x0400[0x0e00-0x0400];	/* 0x0400 */
+	__u8	pad_0x0340[0x0e00-0x0340];	/* 0x0340 */
 
 	/*
 	 * 0xe00 contains the address of the IPL Parameter Information
@@ -310,10 +153,32 @@ struct _lowcore
 
 	/* Align to the top 1k of prefix area */
 	__u8	pad_0x0e08[0x1000-0x0e08];	/* 0x0e08 */
-#else /* !__s390x__ */
-	/* 0x0000 - 0x01ff: defined by architecture */
-	__u32	ccw1[2];			/* 0x0000 */
-	__u32	ccw2[4];			/* 0x0008 */
+} __packed;
+
+#else /* CONFIG_32BIT */
+
+#define LC_ORDER 1
+#define LC_PAGES 2
+
+struct save_area {
+	u64	fp_regs[16];
+	u64	gp_regs[16];
+	u8	psw[16];
+	u8	pad1[8];
+	u32	pref_reg;
+	u32	fp_ctrl_reg;
+	u8	pad2[4];
+	u32	tod_reg;
+	u64	timer;
+	u64	clk_cmp;
+	u8	pad3[8];
+	u32	acc_regs[16];
+	u64	ctrl_regs[16];
+} __packed;
+
+struct _lowcore {
+	__u8	pad_0x0000[0x0014-0x0000];	/* 0x0000 */
+	__u32	ipl_parmblock_ptr;		/* 0x0014 */
 	__u8	pad_0x0018[0x0080-0x0018];	/* 0x0018 */
 	__u32	ext_params;			/* 0x0080 */
 	__u16	cpu_addr;			/* 0x0084 */
@@ -325,14 +190,14 @@ struct _lowcore
 	__u32	data_exc_code;			/* 0x0090 */
 	__u16	mon_class_num;			/* 0x0094 */
 	__u16	per_perc_atmid;			/* 0x0096 */
-	addr_t	per_address;			/* 0x0098 */
+	__u64	per_address;			/* 0x0098 */
 	__u8	exc_access_id;			/* 0x00a0 */
 	__u8	per_access_id;			/* 0x00a1 */
 	__u8	op_access_id;			/* 0x00a2 */
 	__u8	ar_access_id;			/* 0x00a3 */
 	__u8	pad_0x00a4[0x00a8-0x00a4];	/* 0x00a4 */
-	addr_t	trans_exc_code;			/* 0x00a8 */
-	addr_t	monitor_code;			/* 0x00b0 */
+	__u64	trans_exc_code;			/* 0x00a8 */
+	__u64	monitor_code;			/* 0x00b0 */
 	__u16	subchannel_id;			/* 0x00b8 */
 	__u16	subchannel_nr;			/* 0x00ba */
 	__u32	io_int_parm;			/* 0x00bc */
@@ -343,8 +208,10 @@ struct _lowcore
 	__u32	mcck_interruption_code[2];	/* 0x00e8 */
 	__u8	pad_0x00f0[0x00f4-0x00f0];	/* 0x00f0 */
 	__u32	external_damage_code;		/* 0x00f4 */
-	addr_t	failing_storage_address;	/* 0x00f8 */
-	__u8	pad_0x0100[0x0120-0x0100];	/* 0x0100 */
+	__u64	failing_storage_address;	/* 0x00f8 */
+	__u8	pad_0x0100[0x0110-0x0100];	/* 0x0100 */
+	__u64	breaking_event_addr;		/* 0x0110 */
+	__u8	pad_0x0118[0x0120-0x0118];	/* 0x0118 */
 	psw_t	restart_old_psw;		/* 0x0120 */
 	psw_t	external_old_psw;		/* 0x0130 */
 	psw_t	svc_old_psw;			/* 0x0140 */
@@ -367,39 +234,41 @@ struct _lowcore
 	/* CPU accounting and timing values. */
 	__u64	sync_enter_timer;		/* 0x02a0 */
 	__u64	async_enter_timer;		/* 0x02a8 */
-	__u64	exit_timer;			/* 0x02b0 */
-	__u64	user_timer;			/* 0x02b8 */
-	__u64	system_timer;			/* 0x02c0 */
-	__u64	steal_timer;			/* 0x02c8 */
-	__u64	last_update_timer;		/* 0x02d0 */
-	__u64	last_update_clock;		/* 0x02d8 */
+	__u64	mcck_enter_timer;		/* 0x02b0 */
+	__u64	exit_timer;			/* 0x02b8 */
+	__u64	user_timer;			/* 0x02c0 */
+	__u64	system_timer;			/* 0x02c8 */
+	__u64	steal_timer;			/* 0x02d0 */
+	__u64	last_update_timer;		/* 0x02d8 */
+	__u64	last_update_clock;		/* 0x02e0 */
 
 	/* Current process. */
-	__u64	current_task;			/* 0x02e0 */
-	__u64	thread_info;			/* 0x02e8 */
-	__u64	kernel_stack;			/* 0x02f0 */
+	__u64	current_task;			/* 0x02e8 */
+	__u64	thread_info;			/* 0x02f0 */
+	__u64	kernel_stack;			/* 0x02f8 */
 
 	/* Interrupt and panic stack. */
-	__u64	async_stack;			/* 0x02f8 */
-	__u64	panic_stack;			/* 0x0300 */
+	__u64	async_stack;			/* 0x0300 */
+	__u64	panic_stack;			/* 0x0308 */
 
 	/* Address space pointer. */
-	__u64	kernel_asce;			/* 0x0308 */
-	__u64	user_asce;			/* 0x0310 */
-	__u64	user_exec_asce;			/* 0x0318 */
+	__u64	kernel_asce;			/* 0x0310 */
+	__u64	user_asce;			/* 0x0318 */
+	__u64	user_exec_asce;			/* 0x0320 */
 
 	/* SMP info area */
-	struct cpuid cpu_id;			/* 0x0320 */
 	__u32	cpu_nr;				/* 0x0328 */
 	__u32	softirq_pending;		/* 0x032c */
 	__u64	percpu_offset;			/* 0x0330 */
 	__u64	ext_call_fast;			/* 0x0338 */
 	__u64	int_clock;			/* 0x0340 */
-	__u64	clock_comparator;		/* 0x0348 */
-	__u64	vdso_per_cpu_data;		/* 0x0350 */
-	__u64	machine_flags;			/* 0x0358 */
-	__u64	ftrace_func;			/* 0x0360 */
-	__u8	pad_0x0368[0x0380-0x0368];	/* 0x0368 */
+	__u64	mcck_clock;			/* 0x0348 */
+	__u64	clock_comparator;		/* 0x0350 */
+	__u64	vdso_per_cpu_data;		/* 0x0358 */
+	__u64	machine_flags;			/* 0x0360 */
+	__u64	ftrace_func;			/* 0x0368 */
+	__u64	sie_hook;			/* 0x0370 */
+	__u64	cmf_hpp;			/* 0x0378 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
@@ -425,7 +294,7 @@ struct _lowcore
 	/* CPU register save area: defined by architecture */
 	__u64	floating_pt_save_area[16];	/* 0x1200 */
 	__u64	gpregs_save_area[16];		/* 0x1280 */
-	__u32	st_status_fixed_logout[4];	/* 0x1300 */
+	psw_t	psw_save_area;			/* 0x1300 */
 	__u8	pad_0x1310[0x1318-0x1310];	/* 0x1310 */
 	__u32	prefixreg_save_area;		/* 0x1318 */
 	__u32	fpt_creg_save_area;		/* 0x131c */
@@ -439,10 +308,12 @@ struct _lowcore
 
 	/* align to the top of the prefix area */
 	__u8	pad_0x1400[0x2000-0x1400];	/* 0x1400 */
-#endif /* !__s390x__ */
-} __attribute__((packed)); /* End structure*/
+} __packed;
+
+#endif /* CONFIG_32BIT */
 
 #define S390_lowcore (*((struct _lowcore *) 0))
+
 extern struct _lowcore *lowcore_ptr[];
 
 static inline void set_prefix(__u32 address)
@@ -458,6 +329,4 @@ static inline __u32 store_prefix(void)
 	return address;
 }
 
-#endif
-
-#endif
+#endif /* _ASM_S390_LOWCORE_H */
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 5e9daf5..af650fb 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -107,9 +107,6 @@ typedef pte_t *pgtable_t;
 #define __pgd(x)        ((pgd_t) { (x) } )
 #define __pgprot(x)     ((pgprot_t) { (x) } )
 
-/* default storage key used for all pages */
-extern unsigned int default_storage_key;
-
 static inline void
 page_set_storage_key(unsigned long addr, unsigned int skey)
 {
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index e2fa79c..89a504c 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -43,7 +43,7 @@ extern void vmem_map_init(void);
  * The S390 doesn't have any external MMU info: the kernel page
  * tables contain all the necessary information.
  */
-#define update_mmu_cache(vma, address, pte)     do { } while (0)
+#define update_mmu_cache(vma, address, ptep)     do { } while (0)
 
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
@@ -105,7 +105,7 @@ extern char empty_zero_page[PAGE_SIZE];
 #ifndef __ASSEMBLY__
 /*
  * The vmalloc area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
+ * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc,
  * which should be enough for any sane case.
  * By putting vmalloc at the top, we maximise the gap between physical
  * memory and vmalloc to catch misplaced memory accesses. As a side
@@ -120,8 +120,8 @@ extern unsigned long VMALLOC_START;
 #define VMALLOC_END	0x7e000000UL
 #define VMEM_MAP_END	0x80000000UL
 #else /* __s390x__ */
-#define VMALLOC_SIZE	(1UL << 30)
-#define VMALLOC_END	0x3e040000000UL
+#define VMALLOC_SIZE	(128UL << 30)
+#define VMALLOC_END	0x3e000000000UL
 #define VMEM_MAP_END	0x40000000000UL
 #endif /* __s390x__ */
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index b427154..73e2598 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -28,7 +28,7 @@
 
 static inline void get_cpu_id(struct cpuid *ptr)
 {
-	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
+	asm volatile("stidp %0" : "=Q" (*ptr));
 }
 
 extern void s390_adjust_jiffies(void);
@@ -184,9 +184,9 @@ static inline void psw_set_key(unsigned int key)
 static inline void __load_psw(psw_t psw)
 {
 #ifndef __s390x__
-	asm volatile("lpsw  0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+	asm volatile("lpsw  %0" : : "Q" (psw) : "cc");
 #else
-	asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+	asm volatile("lpswe %0" : : "Q" (psw) : "cc");
 #endif
 }
 
@@ -206,17 +206,17 @@ static inline void __load_psw_mask (unsigned long mask)
 	asm volatile(
 		"	basr	%0,0\n"
 		"0:	ahi	%0,1f-0b\n"
-		"	st	%0,4(%1)\n"
-		"	lpsw	0(%1)\n"
+		"	st	%0,%O1+4(%R1)\n"
+		"	lpsw	%1\n"
 		"1:"
-		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+		: "=&d" (addr), "=Q" (psw) : "Q" (psw) : "memory", "cc");
 #else /* __s390x__ */
 	asm volatile(
 		"	larl	%0,1f\n"
-		"	stg	%0,8(%1)\n"
-		"	lpswe	0(%1)\n"
+		"	stg	%0,%O1+8(%R1)\n"
+		"	lpswe	%1\n"
 		"1:"
-		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+		: "=&d" (addr), "=Q" (psw) : "Q" (psw) : "memory", "cc");
 #endif /* __s390x__ */
 }
  
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 95dcf18..e2c218d 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -328,8 +328,8 @@ struct pt_regs
 	psw_t psw;
 	unsigned long gprs[NUM_GPRS];
 	unsigned long orig_gpr2;
-	unsigned short svcnr;
 	unsigned short ilc;
+	unsigned short svcnr;
 };
 #endif
 
@@ -436,6 +436,7 @@ typedef struct
 #define PTRACE_PEEKDATA_AREA	      0x5003
 #define PTRACE_POKETEXT_AREA	      0x5004
 #define PTRACE_POKEDATA_AREA 	      0x5005
+#define PTRACE_GET_LAST_BREAK	      0x5006
 
 /*
  * PT_PROT definition is loosely based on hppa bsd definition in
@@ -489,16 +490,24 @@ struct user_regs_struct
  * These are defined as per linux/ptrace.h, which see.
  */
 #define arch_has_single_step()	(1)
-struct task_struct;
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
+extern void show_regs(struct pt_regs * regs);
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
 #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
 #define user_stack_pointer(regs)((regs)->gprs[15])
 #define regs_return_value(regs)((regs)->gprs[2])
 #define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs * regs);
+
+int regs_query_register_offset(const char *name);
+const char *regs_query_register_name(unsigned int offset);
+unsigned long regs_get_register(struct pt_regs *regs, unsigned int offset);
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n);
+
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->gprs[15] & PSW_ADDR_INSN;
+}
+
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 79d849f..0eaae626 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -13,7 +13,8 @@
 #include <asm/cio.h>
 #include <asm/ccwdev.h>
 
-#define QDIO_MAX_QUEUES_PER_IRQ		32
+/* only use 4 queues to save some cachelines */
+#define QDIO_MAX_QUEUES_PER_IRQ		4
 #define QDIO_MAX_BUFFERS_PER_Q		128
 #define QDIO_MAX_BUFFERS_MASK		(QDIO_MAX_BUFFERS_PER_Q - 1)
 #define QDIO_MAX_ELEMENTS_PER_BUFFER	16
@@ -320,11 +321,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
 #define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
 #define QDIO_ERROR_SLSB_STATE			0x80
 
-/* for qdio_initialize */
-#define QDIO_INBOUND_0COPY_SBALS		0x01
-#define QDIO_OUTBOUND_0COPY_SBALS		0x02
-#define QDIO_USE_OUTBOUND_PCIS			0x04
-
 /* for qdio_cleanup */
 #define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
 #define QDIO_FLAG_CLEANUP_USING_HALT		0x02
@@ -343,7 +339,6 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
  * @input_handler: handler to be called for input queues
  * @output_handler: handler to be called for output queues
  * @int_parm: interruption parameter
- * @flags: initialization flags
  * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
  * @output_sbal_addr_array: address of no_output_qs * 128 pointers
  */
@@ -360,7 +355,6 @@ struct qdio_initialize {
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
 	unsigned long int_parm;
-	unsigned long flags;
 	void **input_sbal_addr_array;
 	void **output_sbal_addr_array;
 };
@@ -374,14 +368,12 @@ struct qdio_initialize {
 #define QDIO_FLAG_SYNC_OUTPUT		0x02
 #define QDIO_FLAG_PCI_OUT		0x10
 
-extern int qdio_initialize(struct qdio_initialize *);
 extern int qdio_allocate(struct qdio_initialize *);
 extern int qdio_establish(struct qdio_initialize *);
 extern int qdio_activate(struct ccw_device *);
 
 extern int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 		   int q_nr, unsigned int bufnr, unsigned int count);
-extern int qdio_cleanup(struct ccw_device*, int);
 extern int qdio_shutdown(struct ccw_device*, int);
 extern int qdio_free(struct ccw_device *);
 extern int qdio_get_ssqd_desc(struct ccw_device *dev, struct qdio_ssqd_desc*);
diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
index 9d2a179..423fdda 100644
--- a/arch/s390/include/asm/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
@@ -124,21 +124,21 @@ static inline void __down_read(struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	ahi	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	aghi	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "i" (RWSEM_ACTIVE_READ_BIAS)
+		: "cc", "memory");
 	if (old < 0)
 		rwsem_down_read_failed(sem);
 }
@@ -152,25 +152,25 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	ltr	%1,%0\n"
 		"	jm	1f\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	ahi	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b\n"
 		"1:"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	ltgr	%1,%0\n"
 		"	jm	1f\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	aghi	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b\n"
 		"1:"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "i" (RWSEM_ACTIVE_READ_BIAS)
+		: "cc", "memory");
 	return old >= 0 ? 1 : 0;
 }
 
@@ -184,20 +184,20 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 	tmp = RWSEM_ACTIVE_WRITE_BIAS;
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	a	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	ag	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "m" (tmp)
 		: "cc", "memory");
 	if (old != 0)
 		rwsem_down_write_failed(sem);
@@ -217,22 +217,22 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%2)\n"
+		"	l	%0,%1\n"
 		"0:	ltr	%0,%0\n"
 		"	jnz	1f\n"
-		"	cs	%0,%4,0(%2)\n"
+		"	cs	%0,%3,%1\n"
 		"	jl	0b\n"
 #else /* __s390x__ */
-		"	lg	%0,0(%2)\n"
+		"	lg	%0,%1\n"
 		"0:	ltgr	%0,%0\n"
 		"	jnz	1f\n"
-		"	csg	%0,%4,0(%2)\n"
+		"	csg	%0,%3,%1\n"
 		"	jl	0b\n"
 #endif /* __s390x__ */
 		"1:"
-		: "=&d" (old), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory");
+		: "=&d" (old), "=Q" (sem->count)
+		: "Q" (sem->count), "d" (RWSEM_ACTIVE_WRITE_BIAS)
+		: "cc", "memory");
 	return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
 }
 
@@ -245,21 +245,20 @@ static inline void __up_read(struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	ahi	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	ahi	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	aghi	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	aghi	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count),
-		  "i" (-RWSEM_ACTIVE_READ_BIAS)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "i" (-RWSEM_ACTIVE_READ_BIAS)
 		: "cc", "memory");
 	if (new < 0)
 		if ((new & RWSEM_ACTIVE_MASK) == 0)
@@ -276,20 +275,20 @@ static inline void __up_write(struct rw_semaphore *sem)
 	tmp = -RWSEM_ACTIVE_WRITE_BIAS;
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	a	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	ag	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "m" (tmp)
 		: "cc", "memory");
 	if (new < 0)
 		if ((new & RWSEM_ACTIVE_MASK) == 0)
@@ -306,20 +305,20 @@ static inline void __downgrade_write(struct rw_semaphore *sem)
 	tmp = -RWSEM_WAITING_BIAS;
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	a	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	a	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	ag	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	ag	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "m" (tmp)
 		: "cc", "memory");
 	if (new > 1)
 		rwsem_downgrade_wake(sem);
@@ -334,20 +333,20 @@ static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	ar	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	ar	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	agr	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	agr	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "d" (delta)
 		: "cc", "memory");
 }
 
@@ -360,20 +359,20 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
 
 	asm volatile(
 #ifndef __s390x__
-		"	l	%0,0(%3)\n"
+		"	l	%0,%2\n"
 		"0:	lr	%1,%0\n"
-		"	ar	%1,%5\n"
-		"	cs	%0,%1,0(%3)\n"
+		"	ar	%1,%4\n"
+		"	cs	%0,%1,%2\n"
 		"	jl	0b"
 #else /* __s390x__ */
-		"	lg	%0,0(%3)\n"
+		"	lg	%0,%2\n"
 		"0:	lgr	%1,%0\n"
-		"	agr	%1,%5\n"
-		"	csg	%0,%1,0(%3)\n"
+		"	agr	%1,%4\n"
+		"	csg	%0,%1,%2\n"
 		"	jl	0b"
 #endif /* __s390x__ */
-		: "=&d" (old), "=&d" (new), "=m" (sem->count)
-		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "=&d" (old), "=&d" (new), "=Q" (sem->count)
+		: "Q" (sem->count), "d" (delta)
 		: "cc", "memory");
 	return new;
 }
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 35d786f..be44d94 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1 +1,3 @@
+#define ISA_DMA_THRESHOLD	(~0UL)
+
 #include <asm-generic/scatterlist.h>
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 52a779c..25e831d 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -2,7 +2,7 @@
  *  include/asm-s390/setup.h
  *
  *  S390 version
- *    Copyright IBM Corp. 1999,2006
+ *    Copyright IBM Corp. 1999,2010
  */
 
 #ifndef _ASM_S390_SETUP_H
@@ -14,14 +14,14 @@
 
 #ifdef __KERNEL__
 
-#include <asm/lowcore.h>
-#include <asm/types.h>
-
 #define PARMAREA		0x10400
 #define MEMORY_CHUNKS		256
 
 #ifndef __ASSEMBLY__
 
+#include <asm/lowcore.h>
+#include <asm/types.h>
+
 #ifndef __s390x__
 #define IPL_DEVICE        (*(unsigned long *)  (0x10404))
 #define INITRD_START      (*(unsigned long *)  (0x1040C))
@@ -71,9 +71,13 @@ extern unsigned int user_mode;
 #define MACHINE_FLAG_KVM	(1UL << 9)
 #define MACHINE_FLAG_HPAGE	(1UL << 10)
 #define MACHINE_FLAG_PFMF	(1UL << 11)
+#define MACHINE_FLAG_LPAR	(1UL << 12)
+#define MACHINE_FLAG_SPP	(1UL << 13)
 
 #define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
 #define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_IS_LPAR		(S390_lowcore.machine_flags & MACHINE_FLAG_LPAR)
+
 #define MACHINE_HAS_DIAG9C	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
 
 #ifndef __s390x__
@@ -85,6 +89,7 @@ extern unsigned int user_mode;
 #define MACHINE_HAS_MVCOS	(0)
 #define MACHINE_HAS_HPAGE	(0)
 #define MACHINE_HAS_PFMF	(0)
+#define MACHINE_HAS_SPP		(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
@@ -94,6 +99,7 @@ extern unsigned int user_mode;
 #define MACHINE_HAS_MVCOS	(S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
 #define MACHINE_HAS_HPAGE	(S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
 #define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_SPP		(S390_lowcore.machine_flags & MACHINE_FLAG_SPP)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
index f72d611..e3bffd4 100644
--- a/arch/s390/include/asm/sigp.h
+++ b/arch/s390/include/asm/sigp.h
@@ -1,24 +1,19 @@
 /*
- *  include/asm-s390/sigp.h
+ *  Routines and structures for signalling other processors.
  *
- *  S390 version
- *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Heiko Carstens (heiko.carstens@de.ibm.com)
- *
- *  sigp.h by D.J. Barrow (c) IBM 1999
- *  contains routines / structures for signalling other S/390 processors in an
- *  SMP configuration.
+ *    Copyright IBM Corp. 1999,2010
+ *    Author(s): Denis Joseph Barrow,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
  */
 
-#ifndef __SIGP__
-#define __SIGP__
+#ifndef __ASM_SIGP_H
+#define __ASM_SIGP_H
 
 #include <asm/system.h>
 
-/* get real cpu address from logical cpu number */
-extern int __cpu_logical_map[];
+/* Get real cpu address from logical cpu number. */
+extern unsigned short __cpu_logical_map[];
 
 static inline int cpu_logical_map(int cpu)
 {
@@ -29,107 +24,108 @@ static inline int cpu_logical_map(int cpu)
 #endif
 }
 
-typedef enum
-{
-	sigp_unassigned=0x0,
-	sigp_sense,
-	sigp_external_call,
-	sigp_emergency_signal,
-	sigp_start,
-	sigp_stop,
-	sigp_restart,
-	sigp_unassigned1,
-	sigp_unassigned2,
-	sigp_stop_and_store_status,
-	sigp_unassigned3,
-	sigp_initial_cpu_reset,
-	sigp_cpu_reset,
-	sigp_set_prefix,
-	sigp_store_status_at_address,
-	sigp_store_extended_status_at_address
-} sigp_order_code;
-
-typedef __u32 sigp_status_word;
-
-typedef enum
-{
-        sigp_order_code_accepted=0,
-	sigp_status_stored,
-	sigp_busy,
-	sigp_not_operational
-} sigp_ccode;
-
+enum {
+	sigp_sense = 1,
+	sigp_external_call = 2,
+	sigp_emergency_signal = 3,
+	sigp_start = 4,
+	sigp_stop = 5,
+	sigp_restart = 6,
+	sigp_stop_and_store_status = 9,
+	sigp_initial_cpu_reset = 11,
+	sigp_cpu_reset = 12,
+	sigp_set_prefix = 13,
+	sigp_store_status_at_address = 14,
+	sigp_store_extended_status_at_address = 15,
+	sigp_set_architecture = 18,
+	sigp_conditional_emergency_signal = 19,
+	sigp_sense_running = 21,
+};
+
+enum {
+	sigp_order_code_accepted = 0,
+	sigp_status_stored = 1,
+	sigp_busy = 2,
+	sigp_not_operational = 3,
+};
 
 /*
- * Definitions for the external call
+ * Definitions for external call.
  */
-
-/* 'Bit' signals, asynchronous */
-typedef enum
-{
-	ec_schedule=0,
+enum {
+	ec_schedule = 0,
 	ec_call_function,
 	ec_call_function_single,
-	ec_bit_last
-} ec_bit_sig;
+};
 
 /*
- * Signal processor
+ * Signal processor.
  */
-static inline sigp_ccode
-signal_processor(__u16 cpu_addr, sigp_order_code order_code)
+static inline int raw_sigp(u16 cpu, int order)
 {
 	register unsigned long reg1 asm ("1") = 0;
-	sigp_ccode ccode;
+	int ccode;
 
 	asm volatile(
 		"	sigp	%1,%2,0(%3)\n"
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		:	"=d"	(ccode)
-		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
-		  "a" (order_code) : "cc" , "memory");
+		: "d" (reg1), "d" (cpu),
+		  "a" (order) : "cc" , "memory");
 	return ccode;
 }
 
 /*
- * Signal processor with parameter
+ * Signal processor with parameter.
  */
-static inline sigp_ccode
-signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code)
+static inline int raw_sigp_p(u32 parameter, u16 cpu, int order)
 {
 	register unsigned int reg1 asm ("1") = parameter;
-	sigp_ccode ccode;
+	int ccode;
 
 	asm volatile(
 		"	sigp	%1,%2,0(%3)\n"
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode)
-		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
-		  "a" (order_code) : "cc" , "memory");
+		: "d" (reg1), "d" (cpu),
+		  "a" (order) : "cc" , "memory");
 	return ccode;
 }
 
 /*
- * Signal processor with parameter and return status
+ * Signal processor with parameter and return status.
  */
-static inline sigp_ccode
-signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr,
-		    sigp_order_code order_code)
+static inline int raw_sigp_ps(u32 *status, u32 parm, u16 cpu, int order)
 {
-	register unsigned int reg1 asm ("1") = parameter;
-	sigp_ccode ccode;
+	register unsigned int reg1 asm ("1") = parm;
+	int ccode;
 
 	asm volatile(
 		"	sigp	%1,%2,0(%3)\n"
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode), "+d" (reg1)
-		: "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
+		: "d" (cpu), "a" (order)
 		: "cc" , "memory");
-	*statusptr = reg1;
+	*status = reg1;
 	return ccode;
 }
 
-#endif /* __SIGP__ */
+static inline int sigp(int cpu, int order)
+{
+	return raw_sigp(cpu_logical_map(cpu), order);
+}
+
+static inline int sigp_p(u32 parameter, int cpu, int order)
+{
+	return raw_sigp_p(parameter, cpu_logical_map(cpu), order);
+}
+
+static inline int sigp_ps(u32 *status, u32 parm, int cpu, int order)
+{
+	return raw_sigp_ps(status, parm, cpu_logical_map(cpu), order);
+}
+
+#endif /* __ASM_SIGP_H */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 2ab1141..edc03cb 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -29,7 +29,43 @@ extern int smp_cpu_polarization[];
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
-extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+extern struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
+
+extern void smp_switch_to_ipl_cpu(void (*func)(void *), void *);
+extern void smp_switch_to_cpu(void (*)(void *), void *, unsigned long sp,
+			      int from, int to);
+extern void smp_restart_cpu(void);
+
+/*
+ * returns 1 if (virtual) cpu is scheduled
+ * returns 0 otherwise
+ */
+static inline int smp_vcpu_scheduled(int cpu)
+{
+	u32 status;
+
+	switch (sigp_ps(&status, 0, cpu, sigp_sense_running)) {
+	case sigp_status_stored:
+		/* Check for running status */
+		if (status & 0x400)
+			return 0;
+		break;
+	case sigp_not_operational:
+		return 0;
+	default:
+		break;
+	}
+	return 1;
+}
+
+#else /* CONFIG_SMP */
+
+static inline void smp_switch_to_ipl_cpu(void (*func)(void *), void *data)
+{
+	func(data);
+}
+
+#define smp_vcpu_scheduled	(1)
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index a587907..56612fc 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -13,8 +13,6 @@
 
 #include <linux/smp.h>
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-
 static inline int
 _raw_compare_and_swap(volatile unsigned int *lock,
 		      unsigned int old, unsigned int new)
@@ -27,22 +25,6 @@ _raw_compare_and_swap(volatile unsigned int *lock,
 	return old;
 }
 
-#else /* __GNUC__ */
-
-static inline int
-_raw_compare_and_swap(volatile unsigned int *lock,
-		      unsigned int old, unsigned int new)
-{
-	asm volatile(
-		"	cs	%0,%3,0(%4)"
-		: "=d" (old), "=m" (*lock)
-		: "0" (old), "d" (new), "a" (lock), "m" (*lock)
-		: "cc", "memory" );
-	return old;
-}
-
-#endif /* __GNUC__ */
-
 /*
  * Simple spin lock operations.  There are two variants, one clears IRQ's
  * on the local processor, one does not.
diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h
index eb18dc1..6bdee21 100644
--- a/arch/s390/include/asm/swab.h
+++ b/arch/s390/include/asm/swab.h
@@ -47,11 +47,11 @@ static inline __u32 __arch_swab32p(const __u32 *x)
 	
 	asm volatile(
 #ifndef __s390x__
-		"	icm	%0,8,3(%1)\n"
-		"	icm	%0,4,2(%1)\n"
-		"	icm	%0,2,1(%1)\n"
-		"	ic	%0,0(%1)"
-		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+		"	icm	%0,8,%O1+3(%R1)\n"
+		"	icm	%0,4,%O1+2(%R1)\n"
+		"	icm	%0,2,%O1+1(%R1)\n"
+		"	ic	%0,%1"
+		: "=&d" (result) : "Q" (*x) : "cc");
 #else /* __s390x__ */
 		"	lrv	%0,%1"
 		: "=d" (result) : "m" (*x));
@@ -77,9 +77,9 @@ static inline __u16 __arch_swab16p(const __u16 *x)
 	
 	asm volatile(
 #ifndef __s390x__
-		"	icm	%0,2,1(%1)\n"
-		"	ic	%0,0(%1)\n"
-		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+		"	icm	%0,2,%O+1(%R1)\n"
+		"	ic	%0,%1\n"
+		: "=&d" (result) : "Q" (*x) : "cc");
 #else /* __s390x__ */
 		"	lrvh	%0,%1"
 		: "=d" (result) : "m" (*x));
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index e0a73d3..8429686 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -15,6 +15,13 @@
 #include <linux/sched.h>
 #include <asm/ptrace.h>
 
+/*
+ * The syscall table always contains 32 bit pointers since we know that the
+ * address of the function to be called is (way) below 4GB.  So the "int"
+ * type here is what we want [need] for both 32 bit and 64 bit systems.
+ */
+extern const unsigned int sys_call_table[];
+
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index 9d70057..22bdb2a 100644
--- a/arch/s390/include/asm/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
@@ -87,7 +87,8 @@ struct sysinfo_2_2_2 {
 
 struct sysinfo_3_2_2 {
 	char reserved_0[31];
-	unsigned char count;
+	unsigned char :4;
+	unsigned char count:4;
 	struct {
 		char reserved_0[4];
 		unsigned short cpus_total;
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 379661d..cef6621 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -24,65 +24,65 @@ extern struct task_struct *__switch_to(void *, void *);
 static inline void save_fp_regs(s390_fp_regs *fpregs)
 {
 	asm volatile(
-		"	std	0,8(%1)\n"
-		"	std	2,24(%1)\n"
-		"	std	4,40(%1)\n"
-		"	std	6,56(%1)"
-		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+		"	std	0,%O0+8(%R0)\n"
+		"	std	2,%O0+24(%R0)\n"
+		"	std	4,%O0+40(%R0)\n"
+		"	std	6,%O0+56(%R0)"
+		: "=Q" (*fpregs) : "Q" (*fpregs));
 	if (!MACHINE_HAS_IEEE)
 		return;
 	asm volatile(
-		"	stfpc	0(%1)\n"
-		"	std	1,16(%1)\n"
-		"	std	3,32(%1)\n"
-		"	std	5,48(%1)\n"
-		"	std	7,64(%1)\n"
-		"	std	8,72(%1)\n"
-		"	std	9,80(%1)\n"
-		"	std	10,88(%1)\n"
-		"	std	11,96(%1)\n"
-		"	std	12,104(%1)\n"
-		"	std	13,112(%1)\n"
-		"	std	14,120(%1)\n"
-		"	std	15,128(%1)\n"
-		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+		"	stfpc	%0\n"
+		"	std	1,%O0+16(%R0)\n"
+		"	std	3,%O0+32(%R0)\n"
+		"	std	5,%O0+48(%R0)\n"
+		"	std	7,%O0+64(%R0)\n"
+		"	std	8,%O0+72(%R0)\n"
+		"	std	9,%O0+80(%R0)\n"
+		"	std	10,%O0+88(%R0)\n"
+		"	std	11,%O0+96(%R0)\n"
+		"	std	12,%O0+104(%R0)\n"
+		"	std	13,%O0+112(%R0)\n"
+		"	std	14,%O0+120(%R0)\n"
+		"	std	15,%O0+128(%R0)\n"
+		: "=Q" (*fpregs) : "Q" (*fpregs));
 }
 
 static inline void restore_fp_regs(s390_fp_regs *fpregs)
 {
 	asm volatile(
-		"	ld	0,8(%0)\n"
-		"	ld	2,24(%0)\n"
-		"	ld	4,40(%0)\n"
-		"	ld	6,56(%0)"
-		: : "a" (fpregs), "m" (*fpregs));
+		"	ld	0,%O0+8(%R0)\n"
+		"	ld	2,%O0+24(%R0)\n"
+		"	ld	4,%O0+40(%R0)\n"
+		"	ld	6,%O0+56(%R0)"
+		: : "Q" (*fpregs));
 	if (!MACHINE_HAS_IEEE)
 		return;
 	asm volatile(
-		"	lfpc	0(%0)\n"
-		"	ld	1,16(%0)\n"
-		"	ld	3,32(%0)\n"
-		"	ld	5,48(%0)\n"
-		"	ld	7,64(%0)\n"
-		"	ld	8,72(%0)\n"
-		"	ld	9,80(%0)\n"
-		"	ld	10,88(%0)\n"
-		"	ld	11,96(%0)\n"
-		"	ld	12,104(%0)\n"
-		"	ld	13,112(%0)\n"
-		"	ld	14,120(%0)\n"
-		"	ld	15,128(%0)\n"
-		: : "a" (fpregs), "m" (*fpregs));
+		"	lfpc	%0\n"
+		"	ld	1,%O0+16(%R0)\n"
+		"	ld	3,%O0+32(%R0)\n"
+		"	ld	5,%O0+48(%R0)\n"
+		"	ld	7,%O0+64(%R0)\n"
+		"	ld	8,%O0+72(%R0)\n"
+		"	ld	9,%O0+80(%R0)\n"
+		"	ld	10,%O0+88(%R0)\n"
+		"	ld	11,%O0+96(%R0)\n"
+		"	ld	12,%O0+104(%R0)\n"
+		"	ld	13,%O0+112(%R0)\n"
+		"	ld	14,%O0+120(%R0)\n"
+		"	ld	15,%O0+128(%R0)\n"
+		: : "Q" (*fpregs));
 }
 
 static inline void save_access_regs(unsigned int *acrs)
 {
-	asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory");
+	asm volatile("stam 0,15,%0" : "=Q" (*acrs));
 }
 
 static inline void restore_access_regs(unsigned int *acrs)
 {
-	asm volatile("lam 0,15,0(%0)" : : "a" (acrs));
+	asm volatile("lam 0,15,%0" : : "Q" (*acrs));
 }
 
 #define switch_to(prev,next,last) do {					     \
@@ -110,6 +110,7 @@ extern void pfault_fini(void);
 #endif /* CONFIG_PFAULT */
 
 extern void cmma_init(void);
+extern int memcpy_real(void *, void *, size_t);
 
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \
@@ -139,48 +140,48 @@ static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
 		shift = (3 ^ (addr & 3)) << 3;
 		addr ^= addr & 3;
 		asm volatile(
-			"	l	%0,0(%4)\n"
+			"	l	%0,%4\n"
 			"0:	lr	0,%0\n"
 			"	nr	0,%3\n"
 			"	or	0,%2\n"
-			"	cs	%0,0,0(%4)\n"
+			"	cs	%0,0,%4\n"
 			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) addr)
-			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
-			  "m" (*(int *) addr) : "memory", "cc", "0");
+			: "=&d" (old), "=Q" (*(int *) addr)
+			: "d" (x << shift), "d" (~(255 << shift)),
+			  "Q" (*(int *) addr) : "memory", "cc", "0");
 		return old >> shift;
 	case 2:
 		addr = (unsigned long) ptr;
 		shift = (2 ^ (addr & 2)) << 3;
 		addr ^= addr & 2;
 		asm volatile(
-			"	l	%0,0(%4)\n"
+			"	l	%0,%4\n"
 			"0:	lr	0,%0\n"
 			"	nr	0,%3\n"
 			"	or	0,%2\n"
-			"	cs	%0,0,0(%4)\n"
+			"	cs	%0,0,%4\n"
 			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) addr)
-			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
-			  "m" (*(int *) addr) : "memory", "cc", "0");
+			: "=&d" (old), "=Q" (*(int *) addr)
+			: "d" (x << shift), "d" (~(65535 << shift)),
+			  "Q" (*(int *) addr) : "memory", "cc", "0");
 		return old >> shift;
 	case 4:
 		asm volatile(
-			"	l	%0,0(%3)\n"
-			"0:	cs	%0,%2,0(%3)\n"
+			"	l	%0,%3\n"
+			"0:	cs	%0,%2,%3\n"
 			"	jl	0b\n"
-			: "=&d" (old), "=m" (*(int *) ptr)
-			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
+			: "=&d" (old), "=Q" (*(int *) ptr)
+			: "d" (x), "Q" (*(int *) ptr)
 			: "memory", "cc");
 		return old;
 #ifdef __s390x__
 	case 8:
 		asm volatile(
-			"	lg	%0,0(%3)\n"
-			"0:	csg	%0,%2,0(%3)\n"
+			"	lg	%0,%3\n"
+			"0:	csg	%0,%2,%3\n"
 			"	jl	0b\n"
 			: "=&d" (old), "=m" (*(long *) ptr)
-			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
+			: "d" (x), "Q" (*(long *) ptr)
 			: "memory", "cc");
 		return old;
 #endif /* __s390x__ */
@@ -215,20 +216,20 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 		shift = (3 ^ (addr & 3)) << 3;
 		addr ^= addr & 3;
 		asm volatile(
-			"	l	%0,0(%4)\n"
+			"	l	%0,%2\n"
 			"0:	nr	%0,%5\n"
 			"	lr	%1,%0\n"
-			"	or	%0,%2\n"
-			"	or	%1,%3\n"
-			"	cs	%0,%1,0(%4)\n"
+			"	or	%0,%3\n"
+			"	or	%1,%4\n"
+			"	cs	%0,%1,%2\n"
 			"	jnl	1f\n"
 			"	xr	%1,%0\n"
 			"	nr	%1,%5\n"
 			"	jnz	0b\n"
 			"1:"
-			: "=&d" (prev), "=&d" (tmp)
-			: "d" (old << shift), "d" (new << shift), "a" (ptr),
-			  "d" (~(255 << shift))
+			: "=&d" (prev), "=&d" (tmp), "=Q" (*(int *) ptr)
+			: "d" (old << shift), "d" (new << shift),
+			  "d" (~(255 << shift)), "Q" (*(int *) ptr)
 			: "memory", "cc");
 		return prev >> shift;
 	case 2:
@@ -236,33 +237,35 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 		shift = (2 ^ (addr & 2)) << 3;
 		addr ^= addr & 2;
 		asm volatile(
-			"	l	%0,0(%4)\n"
+			"	l	%0,%2\n"
 			"0:	nr	%0,%5\n"
 			"	lr	%1,%0\n"
-			"	or	%0,%2\n"
-			"	or	%1,%3\n"
-			"	cs	%0,%1,0(%4)\n"
+			"	or	%0,%3\n"
+			"	or	%1,%4\n"
+			"	cs	%0,%1,%2\n"
 			"	jnl	1f\n"
 			"	xr	%1,%0\n"
 			"	nr	%1,%5\n"
 			"	jnz	0b\n"
 			"1:"
-			: "=&d" (prev), "=&d" (tmp)
-			: "d" (old << shift), "d" (new << shift), "a" (ptr),
-			  "d" (~(65535 << shift))
+			: "=&d" (prev), "=&d" (tmp), "=Q" (*(int *) ptr)
+			: "d" (old << shift), "d" (new << shift),
+			  "d" (~(65535 << shift)), "Q" (*(int *) ptr)
 			: "memory", "cc");
 		return prev >> shift;
 	case 4:
 		asm volatile(
-			"	cs	%0,%2,0(%3)\n"
-			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			"	cs	%0,%3,%1\n"
+			: "=&d" (prev), "=Q" (*(int *) ptr)
+			: "0" (old), "d" (new), "Q" (*(int *) ptr)
 			: "memory", "cc");
 		return prev;
 #ifdef __s390x__
 	case 8:
 		asm volatile(
-			"	csg	%0,%2,0(%3)\n"
-			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			"	csg	%0,%3,%1\n"
+			: "=&d" (prev), "=Q" (*(long *) ptr)
+			: "0" (old), "d" (new), "Q" (*(long *) ptr)
 			: "memory", "cc");
 		return prev;
 #endif /* __s390x__ */
@@ -302,17 +305,17 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 #define __ctl_load(array, low, high) ({				\
 	typedef struct { char _[sizeof(array)]; } addrtype;	\
 	asm volatile(						\
-		"	lctlg	%1,%2,0(%0)\n"			\
-		: : "a" (&array), "i" (low), "i" (high),	\
-		    "m" (*(addrtype *)(&array)));		\
+		"	lctlg	%1,%2,%0\n"			\
+		: : "Q" (*(addrtype *)(&array)),		\
+		    "i" (low), "i" (high));			\
 	})
 
 #define __ctl_store(array, low, high) ({			\
 	typedef struct { char _[sizeof(array)]; } addrtype;	\
 	asm volatile(						\
-		"	stctg	%2,%3,0(%1)\n"			\
-		: "=m" (*(addrtype *)(&array))			\
-		: "a" (&array), "i" (low), "i" (high));		\
+		"	stctg	%1,%2,%0\n"			\
+		: "=Q" (*(addrtype *)(&array))			\
+		: "i" (low), "i" (high));			\
 	})
 
 #else /* __s390x__ */
@@ -320,17 +323,17 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 #define __ctl_load(array, low, high) ({				\
 	typedef struct { char _[sizeof(array)]; } addrtype;	\
 	asm volatile(						\
-		"	lctl	%1,%2,0(%0)\n"			\
-		: : "a" (&array), "i" (low), "i" (high),	\
-		    "m" (*(addrtype *)(&array)));		\
+		"	lctl	%1,%2,%0\n"			\
+		: : "Q" (*(addrtype *)(&array)),		\
+		    "i" (low), "i" (high));			\
 })
 
 #define __ctl_store(array, low, high) ({			\
 	typedef struct { char _[sizeof(array)]; } addrtype;	\
 	asm volatile(						\
-		"	stctl	%2,%3,0(%1)\n"			\
-		: "=m" (*(addrtype *)(&array))			\
-		: "a" (&array), "i" (low), "i" (high));		\
+		"	stctl	%1,%2,%0\n"			\
+		: "=Q" (*(addrtype *)(&array))			\
+		: "i" (low), "i" (high));			\
 	})
 
 #endif /* __s390x__ */
@@ -456,11 +459,6 @@ extern void (*_machine_power_off)(void);
 
 #define arch_align_stack(x) (x)
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-extern psw_t sysc_restore_trace_psw;
-extern psw_t io_restore_trace_psw;
-#endif
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 66069e7..5baf023 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -50,6 +50,7 @@ struct thread_info {
 	struct restart_block	restart_block;
 	__u64			user_timer;
 	__u64			system_timer;
+	unsigned long		last_break;	/* last breaking-event-address. */
 };
 
 /*
@@ -73,7 +74,7 @@ struct thread_info {
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
-	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
+	return (struct thread_info *)(S390_lowcore.kernel_stack - THREAD_SIZE);
 }
 
 #define THREAD_SIZE_ORDER THREAD_ORDER
@@ -96,7 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
 #define TIF_31BIT		17	/* 32bit process */
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	19	/* restore signal mask in do_signal() */
 #define TIF_FREEZE		20	/* thread is freezing for suspend */
 
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 68d9fea..09d345a 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -20,10 +20,10 @@ static inline int set_clock(__u64 time)
 	int cc;
 
 	asm volatile(
-		"   sck   0(%2)\n"
+		"   sck   %1\n"
 		"   ipm   %0\n"
 		"   srl   %0,28\n"
-		: "=d" (cc) : "m" (time), "a" (&time) : "cc");
+		: "=d" (cc) : "Q" (time) : "cc");
 	return cc;
 }
 
@@ -32,21 +32,21 @@ static inline int store_clock(__u64 *time)
 	int cc;
 
 	asm volatile(
-		"   stck  0(%2)\n"
+		"   stck  %1\n"
 		"   ipm   %0\n"
 		"   srl   %0,28\n"
-		: "=d" (cc), "=m" (*time) : "a" (time) : "cc");
+		: "=d" (cc), "=Q" (*time) : : "cc");
 	return cc;
 }
 
 static inline void set_clock_comparator(__u64 time)
 {
-	asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time));
+	asm volatile("sckc %0" : : "Q" (time));
 }
 
 static inline void store_clock_comparator(__u64 *time)
 {
-	asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time));
+	asm volatile("stckc %0" : "=Q" (*time));
 }
 
 #define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
@@ -57,25 +57,19 @@ static inline unsigned long long get_clock (void)
 {
 	unsigned long long clk;
 
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 	asm volatile("stck %0" : "=Q" (clk) : : "cc");
-#else /* __GNUC__ */
-	asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
-#endif /* __GNUC__ */
 	return clk;
 }
 
+static inline void get_clock_ext(char *clk)
+{
+	asm volatile("stcke %0" : "=Q" (*clk) : : "cc");
+}
+
 static inline unsigned long long get_clock_xt(void)
 {
 	unsigned char clk[16];
-
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
-	asm volatile("stcke %0" : "=Q" (clk) : : "cc");
-#else /* __GNUC__ */
-	asm volatile("stcke 0(%1)" : "=m" (clk)
-				   : "a" (clk) : "cc");
-#endif /* __GNUC__ */
-
+	get_clock_ext(clk);
 	return *((unsigned long long *)&clk[1]);
 }
 
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 6e7211a..dc8a672 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -7,8 +7,10 @@
 
 const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
 
+extern unsigned char cpu_core_id[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 
+#define topology_core_id(cpu)		(cpu_core_id[cpu])
 #define topology_core_cpumask(cpu)	(&cpu_core_map[cpu])
 
 int topology_set_cpu_management(int fc);
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index cbf0a87..d6b1ed0 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -265,6 +265,12 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 		return uaccess.copy_from_user(n, from, to);
 }
 
+extern void copy_from_user_overflow(void)
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+__compiletime_warning("copy_from_user() buffer size is not provably correct")
+#endif
+;
+
 /**
  * copy_from_user: - Copy a block of data from user space.
  * @to:   Destination address, in kernel space.
@@ -284,7 +290,13 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
+	unsigned int sz = __compiletime_object_size(to);
+
 	might_fault();
+	if (unlikely(sz != -1 && sz < n)) {
+		copy_from_user_overflow();
+		return n;
+	}
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
 	else
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 6e9f049..5f00751 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -392,6 +392,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_MMAP
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index 7bdd7c8..533f357 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -7,7 +7,7 @@
 #define VDSO32_LBASE	0
 #define VDSO64_LBASE	0
 
-#define VDSO_VERSION_STRING	LINUX_2.6.26
+#define VDSO_VERSION_STRING	LINUX_2.6.29
 
 #ifndef __ASSEMBLY__
 
@@ -29,6 +29,7 @@ struct vdso_data {
 	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x30 */
 	__u32 tz_dsttime;		/* Type of dst correction	0x34 */
 	__u32 ectg_available;
+	__u32 ntp_mult;			/* NTP adjusted multiplier	0x3C */
 };
 
 struct vdso_per_cpu_data {
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 683f638..64230bc 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -29,9 +29,12 @@ obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
 
 extra-y				+= head.o init_task.o vmlinux.lds
+extra-y				+= $(if $(CONFIG_64BIT),head64.o,head31.o)
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o topology.o
+obj-$(CONFIG_SMP)		+= $(if $(CONFIG_64BIT),switch_cpu64.o, \
+							switch_cpu.o)
 obj-$(CONFIG_HIBERNATION)	+= suspend.o swsusp_asm64.o
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 63e4643..5232278 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -4,18 +4,27 @@
  * and format the required data.
  */
 
-#include <linux/sched.h>
+#define ASM_OFFSETS_C
+
 #include <linux/kbuild.h>
+#include <linux/sched.h>
 #include <asm/vdso.h>
 #include <asm/sigp.h>
 
+/*
+ * Make sure that the compiler is new enough. We want a compiler that
+ * is known to work with the "Q" assembler constraint.
+ */
+#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+#error Your compiler is too old; please use version 3.3.3 or newer
+#endif
+
 int main(void)
 {
 	DEFINE(__THREAD_info, offsetof(struct task_struct, stack));
 	DEFINE(__THREAD_ksp, offsetof(struct task_struct, thread.ksp));
 	DEFINE(__THREAD_per, offsetof(struct task_struct, thread.per_info));
-	DEFINE(__THREAD_mm_segment,
-	       offsetof(struct task_struct, thread.mm_segment));
+	DEFINE(__THREAD_mm_segment, offsetof(struct task_struct, thread.mm_segment));
 	BLANK();
 	DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
 	BLANK();
@@ -30,6 +39,7 @@ int main(void)
 	DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
 	DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
 	DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
+	DEFINE(__TI_last_break, offsetof(struct thread_info, last_break));
 	BLANK();
 	DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
 	DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
@@ -52,18 +62,98 @@ int main(void)
 	DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
 	DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
 	DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
-	DEFINE(__VDSO_ECTG_BASE,
-	       offsetof(struct vdso_per_cpu_data, ectg_timer_base));
-	DEFINE(__VDSO_ECTG_USER,
-	       offsetof(struct vdso_per_cpu_data, ectg_user_time));
+	DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
+	DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
+	DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
 	/* constants used by the vdso */
 	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
 	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
 	DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
+	BLANK();
 	/* constants for SIGP */
 	DEFINE(__SIGP_STOP, sigp_stop);
 	DEFINE(__SIGP_RESTART, sigp_restart);
 	DEFINE(__SIGP_SENSE, sigp_sense);
 	DEFINE(__SIGP_INITIAL_CPU_RESET, sigp_initial_cpu_reset);
+	BLANK();
+	/* lowcore offsets */
+	DEFINE(__LC_EXT_PARAMS, offsetof(struct _lowcore, ext_params));
+	DEFINE(__LC_CPU_ADDRESS, offsetof(struct _lowcore, cpu_addr));
+	DEFINE(__LC_EXT_INT_CODE, offsetof(struct _lowcore, ext_int_code));
+	DEFINE(__LC_SVC_ILC, offsetof(struct _lowcore, svc_ilc));
+	DEFINE(__LC_SVC_INT_CODE, offsetof(struct _lowcore, svc_code));
+	DEFINE(__LC_PGM_ILC, offsetof(struct _lowcore, pgm_ilc));
+	DEFINE(__LC_PGM_INT_CODE, offsetof(struct _lowcore, pgm_code));
+	DEFINE(__LC_PER_ATMID, offsetof(struct _lowcore, per_perc_atmid));
+	DEFINE(__LC_PER_ADDRESS, offsetof(struct _lowcore, per_address));
+	DEFINE(__LC_PER_ACCESS_ID, offsetof(struct _lowcore, per_access_id));
+	DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_access_id));
+	DEFINE(__LC_SUBCHANNEL_ID, offsetof(struct _lowcore, subchannel_id));
+	DEFINE(__LC_SUBCHANNEL_NR, offsetof(struct _lowcore, subchannel_nr));
+	DEFINE(__LC_IO_INT_PARM, offsetof(struct _lowcore, io_int_parm));
+	DEFINE(__LC_IO_INT_WORD, offsetof(struct _lowcore, io_int_word));
+	DEFINE(__LC_STFL_FAC_LIST, offsetof(struct _lowcore, stfl_fac_list));
+	DEFINE(__LC_MCCK_CODE, offsetof(struct _lowcore, mcck_interruption_code));
+	DEFINE(__LC_DUMP_REIPL, offsetof(struct _lowcore, ipib));
+	BLANK();
+	DEFINE(__LC_RST_NEW_PSW, offsetof(struct _lowcore, restart_psw));
+	DEFINE(__LC_RST_OLD_PSW, offsetof(struct _lowcore, restart_old_psw));
+	DEFINE(__LC_EXT_OLD_PSW, offsetof(struct _lowcore, external_old_psw));
+	DEFINE(__LC_SVC_OLD_PSW, offsetof(struct _lowcore, svc_old_psw));
+	DEFINE(__LC_PGM_OLD_PSW, offsetof(struct _lowcore, program_old_psw));
+	DEFINE(__LC_MCK_OLD_PSW, offsetof(struct _lowcore, mcck_old_psw));
+	DEFINE(__LC_IO_OLD_PSW, offsetof(struct _lowcore, io_old_psw));
+	DEFINE(__LC_EXT_NEW_PSW, offsetof(struct _lowcore, external_new_psw));
+	DEFINE(__LC_SVC_NEW_PSW, offsetof(struct _lowcore, svc_new_psw));
+	DEFINE(__LC_PGM_NEW_PSW, offsetof(struct _lowcore, program_new_psw));
+	DEFINE(__LC_MCK_NEW_PSW, offsetof(struct _lowcore, mcck_new_psw));
+	DEFINE(__LC_IO_NEW_PSW, offsetof(struct _lowcore, io_new_psw));
+	DEFINE(__LC_SAVE_AREA, offsetof(struct _lowcore, save_area));
+	DEFINE(__LC_RETURN_PSW, offsetof(struct _lowcore, return_psw));
+	DEFINE(__LC_RETURN_MCCK_PSW, offsetof(struct _lowcore, return_mcck_psw));
+	DEFINE(__LC_SYNC_ENTER_TIMER, offsetof(struct _lowcore, sync_enter_timer));
+	DEFINE(__LC_ASYNC_ENTER_TIMER, offsetof(struct _lowcore, async_enter_timer));
+	DEFINE(__LC_MCCK_ENTER_TIMER, offsetof(struct _lowcore, mcck_enter_timer));
+	DEFINE(__LC_EXIT_TIMER, offsetof(struct _lowcore, exit_timer));
+	DEFINE(__LC_USER_TIMER, offsetof(struct _lowcore, user_timer));
+	DEFINE(__LC_SYSTEM_TIMER, offsetof(struct _lowcore, system_timer));
+	DEFINE(__LC_STEAL_TIMER, offsetof(struct _lowcore, steal_timer));
+	DEFINE(__LC_LAST_UPDATE_TIMER, offsetof(struct _lowcore, last_update_timer));
+	DEFINE(__LC_LAST_UPDATE_CLOCK, offsetof(struct _lowcore, last_update_clock));
+	DEFINE(__LC_CURRENT, offsetof(struct _lowcore, current_task));
+	DEFINE(__LC_THREAD_INFO, offsetof(struct _lowcore, thread_info));
+	DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
+	DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
+	DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+	DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce));
+	DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
+	DEFINE(__LC_USER_EXEC_ASCE, offsetof(struct _lowcore, user_exec_asce));
+	DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
+	DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
+	DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
+	DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func));
+	DEFINE(__LC_IRB, offsetof(struct _lowcore, irb));
+	DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area));
+	DEFINE(__LC_CLOCK_COMP_SAVE_AREA, offsetof(struct _lowcore, clock_comp_save_area));
+	DEFINE(__LC_PSW_SAVE_AREA, offsetof(struct _lowcore, psw_save_area));
+	DEFINE(__LC_PREFIX_SAVE_AREA, offsetof(struct _lowcore, prefixreg_save_area));
+	DEFINE(__LC_AREGS_SAVE_AREA, offsetof(struct _lowcore, access_regs_save_area));
+	DEFINE(__LC_FPREGS_SAVE_AREA, offsetof(struct _lowcore, floating_pt_save_area));
+	DEFINE(__LC_GPREGS_SAVE_AREA, offsetof(struct _lowcore, gpregs_save_area));
+	DEFINE(__LC_CREGS_SAVE_AREA, offsetof(struct _lowcore, cregs_save_area));
+#ifdef CONFIG_32BIT
+	DEFINE(__LC_PFAULT_INTPARM, offsetof(struct _lowcore, ext_params));
+	DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, extended_save_area_addr));
+#else /* CONFIG_32BIT */
+	DEFINE(__LC_PFAULT_INTPARM, offsetof(struct _lowcore, ext_params2));
+	DEFINE(__LC_EXT_PARAMS2, offsetof(struct _lowcore, ext_params2));
+	DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, floating_pt_save_area));
+	DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste));
+	DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area));
+	DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
+	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
+	DEFINE(__LC_SIE_HOOK, offsetof(struct _lowcore, sie_hook));
+	DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+#endif /* CONFIG_32BIT */
 	return 0;
 }
diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S
index dc7e525..15e46ca 100644
--- a/arch/s390/kernel/base.S
+++ b/arch/s390/kernel/base.S
@@ -6,8 +6,8 @@
  *		 Michael Holzheu <holzheu@de.ibm.com>
  */
 
+#include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
-#include <asm/lowcore.h>
 
 #ifdef CONFIG_64BIT
 
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 11c3aba..73b624e 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -29,7 +29,6 @@
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
-#include <linux/slab.h>
 #include <linux/uio.h>
 #include <linux/quota.h>
 #include <linux/module.h>
@@ -52,6 +51,7 @@
 #include <linux/ptrace.h>
 #include <linux/fadvise.h>
 #include <linux/ipc.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/uaccess.h>
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 30de2d0..672ce52 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -547,7 +547,7 @@ sys32_setdomainname_wrapper:
 	.globl	sys32_newuname_wrapper
 sys32_newuname_wrapper:
 	llgtr	%r2,%r2			# struct new_utsname *
-	jg	sys_s390_newuname	# branch to system call
+	jg	sys_newuname		# branch to system call
 
 	.globl	compat_sys_adjtimex_wrapper
 compat_sys_adjtimex_wrapper:
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 0168472..9819226 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -655,6 +655,7 @@ found:
 	p_info->act_entry_offset = 0;
 	file->private_data = p_info;
 	debug_info_get(debug_info);
+	nonseekable_open(inode, file);
 out:
 	mutex_unlock(&debug_mutex);
 	return rc;
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index db943a7..b39b27d 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -86,10 +86,17 @@ enum {
 	U4_12,	/* 4 bit unsigned value starting at 12 */
 	U4_16,	/* 4 bit unsigned value starting at 16 */
 	U4_20,	/* 4 bit unsigned value starting at 20 */
+	U4_32,	/* 4 bit unsigned value starting at 32 */
 	U8_8,	/* 8 bit unsigned value starting at 8 */
 	U8_16,	/* 8 bit unsigned value starting at 16 */
+	U8_24,	/* 8 bit unsigned value starting at 24 */
+	U8_32,	/* 8 bit unsigned value starting at 32 */
+	I8_8,	/* 8 bit signed value starting at 8 */
+	I8_32,	/* 8 bit signed value starting at 32 */
 	I16_16,	/* 16 bit signed value starting at 16 */
+	I16_32,	/* 32 bit signed value starting at 16 */
 	U16_16,	/* 16 bit unsigned value starting at 16 */
+	U16_32,	/* 32 bit unsigned value starting at 16 */
 	J16_16,	/* PC relative jump offset at 16 */
 	J32_16,	/* PC relative long offset at 16 */
 	I32_16,	/* 32 bit signed value starting at 16 */
@@ -104,21 +111,37 @@ enum {
  */
 enum {
 	INSTR_INVALID,
-	INSTR_E, INSTR_RIE_RRP, INSTR_RIL_RI, INSTR_RIL_RP, INSTR_RIL_RU,
-	INSTR_RIL_UP, INSTR_RI_RI, INSTR_RI_RP, INSTR_RI_RU, INSTR_RI_UP,
+	INSTR_E,
+	INSTR_RIE_R0IU, INSTR_RIE_R0UU, INSTR_RIE_RRP, INSTR_RIE_RRPU,
+	INSTR_RIE_RRUUU, INSTR_RIE_RUPI, INSTR_RIE_RUPU,
+	INSTR_RIL_RI, INSTR_RIL_RP, INSTR_RIL_RU, INSTR_RIL_UP,
+	INSTR_RIS_R0RDU, INSTR_RIS_R0UU, INSTR_RIS_RURDI, INSTR_RIS_RURDU,
+	INSTR_RI_RI, INSTR_RI_RP, INSTR_RI_RU, INSTR_RI_UP,
 	INSTR_RRE_00, INSTR_RRE_0R, INSTR_RRE_AA, INSTR_RRE_AR, INSTR_RRE_F0,
-	INSTR_RRE_FF, INSTR_RRE_R0, INSTR_RRE_RA, INSTR_RRE_RF, INSTR_RRE_RR,
-	INSTR_RRE_RR_OPT, INSTR_RRF_F0FF, INSTR_RRF_FUFF, INSTR_RRF_M0RR,
-	INSTR_RRF_R0RR, INSTR_RRF_RURR, INSTR_RRF_U0FF, INSTR_RRF_U0RF,
+	INSTR_RRE_FF, INSTR_RRE_FR, INSTR_RRE_R0, INSTR_RRE_RA, INSTR_RRE_RF,
+	INSTR_RRE_RR, INSTR_RRE_RR_OPT,
+	INSTR_RRF_0UFF, INSTR_RRF_F0FF, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
+	INSTR_RRF_FFRU, INSTR_RRF_FUFF, INSTR_RRF_M0RR, INSTR_RRF_R0RR,
+	INSTR_RRF_RURR, INSTR_RRF_U0FF, INSTR_RRF_U0RF, INSTR_RRF_U0RR,
+	INSTR_RRF_UUFF, INSTR_RRR_F0FF, INSTR_RRS_RRRDU,
 	INSTR_RR_FF, INSTR_RR_R0, INSTR_RR_RR, INSTR_RR_U0, INSTR_RR_UR,
-	INSTR_RSE_CCRD, INSTR_RSE_RRRD, INSTR_RSE_RURD, INSTR_RSI_RRP,
-	INSTR_RSL_R0RD, INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD,
-	INSTR_RSY_RURD, INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD,
-	INSTR_RS_RRRD, INSTR_RS_RURD, INSTR_RXE_FRRD, INSTR_RXE_RRRD,
-	INSTR_RXF_FRRDF, INSTR_RXY_FRRD, INSTR_RXY_RRRD, INSTR_RX_FRRD,
-	INSTR_RX_RRRD, INSTR_RX_URRD, INSTR_SIY_URD, INSTR_SI_URD,
-	INSTR_SSE_RDRD, INSTR_SSF_RRDRD, INSTR_SS_L0RDRD, INSTR_SS_LIRDRD,
-	INSTR_SS_LLRDRD, INSTR_SS_RRRDRD, INSTR_SS_RRRDRD2, INSTR_SS_RRRDRD3,
+	INSTR_RSE_CCRD, INSTR_RSE_RRRD, INSTR_RSE_RURD,
+	INSTR_RSI_RRP,
+	INSTR_RSL_R0RD,
+	INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD, INSTR_RSY_RURD,
+	INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD, INSTR_RS_RRRD,
+	INSTR_RS_RURD,
+	INSTR_RXE_FRRD, INSTR_RXE_RRRD,
+	INSTR_RXF_FRRDF,
+	INSTR_RXY_FRRD, INSTR_RXY_RRRD, INSTR_RXY_URRD,
+	INSTR_RX_FRRD, INSTR_RX_RRRD, INSTR_RX_URRD,
+	INSTR_SIL_RDI, INSTR_SIL_RDU,
+	INSTR_SIY_IRD, INSTR_SIY_URD,
+	INSTR_SI_URD,
+	INSTR_SSE_RDRD,
+	INSTR_SSF_RRDRD,
+	INSTR_SS_L0RDRD, INSTR_SS_LIRDRD, INSTR_SS_LLRDRD, INSTR_SS_RRRDRD,
+	INSTR_SS_RRRDRD2, INSTR_SS_RRRDRD3,
 	INSTR_S_00, INSTR_S_RD,
 };
 
@@ -129,7 +152,7 @@ struct operand {
 };
 
 struct insn {
-	const char name[5];
+	const char name[6];
 	unsigned char opfrag;
 	unsigned char format;
 };
@@ -170,11 +193,16 @@ static const struct operand operands[] =
 	[U4_12]  = {  4, 12, 0 },
 	[U4_16]  = {  4, 16, 0 },
 	[U4_20]  = {  4, 20, 0 },
+	[U4_32]  = {  4, 32, 0 },
 	[U8_8]	 = {  8,  8, 0 },
 	[U8_16]  = {  8, 16, 0 },
+	[U8_24]  = {  8, 24, 0 },
+	[U8_32]  = {  8, 32, 0 },
 	[I16_16] = { 16, 16, OPERAND_SIGNED },
 	[U16_16] = { 16, 16, 0 },
+	[U16_32] = { 16, 32, 0 },
 	[J16_16] = { 16, 16, OPERAND_PCREL },
+	[I16_32] = { 16, 32, OPERAND_SIGNED },
 	[J32_16] = { 32, 16, OPERAND_PCREL },
 	[I32_16] = { 32, 16, OPERAND_SIGNED },
 	[U32_16] = { 32, 16, 0 },
@@ -183,82 +211,93 @@ static const struct operand operands[] =
 };
 
 static const unsigned char formats[][7] = {
-	[INSTR_E]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. pr    */
-	[INSTR_RIE_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },   /* e.g. brxhg */
-	[INSTR_RIL_RP]	  = { 0x0f, R_8,J32_16,0,0,0,0 },      /* e.g. brasl */
-	[INSTR_RIL_UP]	  = { 0x0f, U4_8,J32_16,0,0,0,0 },     /* e.g. brcl  */
-	[INSTR_RIL_RI]	  = { 0x0f, R_8,I32_16,0,0,0,0 },      /* e.g. afi   */
-	[INSTR_RIL_RU]	  = { 0x0f, R_8,U32_16,0,0,0,0 },      /* e.g. alfi  */
-	[INSTR_RI_RI]	  = { 0x0f, R_8,I16_16,0,0,0,0 },      /* e.g. ahi   */
-	[INSTR_RI_RP]	  = { 0x0f, R_8,J16_16,0,0,0,0 },      /* e.g. brct  */
-	[INSTR_RI_RU]	  = { 0x0f, R_8,U16_16,0,0,0,0 },      /* e.g. tml   */
-	[INSTR_RI_UP]	  = { 0x0f, U4_8,J16_16,0,0,0,0 },     /* e.g. brc   */
-	[INSTR_RRE_00]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. palb  */
-	[INSTR_RRE_0R]	  = { 0xff, R_28,0,0,0,0,0 },	       /* e.g. tb    */
-	[INSTR_RRE_AA]	  = { 0xff, A_24,A_28,0,0,0,0 },       /* e.g. cpya  */
-	[INSTR_RRE_AR]	  = { 0xff, A_24,R_28,0,0,0,0 },       /* e.g. sar   */
-	[INSTR_RRE_F0]	  = { 0xff, F_24,0,0,0,0,0 },	       /* e.g. sqer  */
-	[INSTR_RRE_FF]	  = { 0xff, F_24,F_28,0,0,0,0 },       /* e.g. debr  */
-	[INSTR_RRE_R0]	  = { 0xff, R_24,0,0,0,0,0 },	       /* e.g. ipm   */
-	[INSTR_RRE_RA]	  = { 0xff, R_24,A_28,0,0,0,0 },       /* e.g. ear   */
-	[INSTR_RRE_RF]	  = { 0xff, R_24,F_28,0,0,0,0 },       /* e.g. cefbr */
-	[INSTR_RRE_RR]	  = { 0xff, R_24,R_28,0,0,0,0 },       /* e.g. lura  */
-	[INSTR_RRE_RR_OPT]= { 0xff, R_24,RO_28,0,0,0,0 },      /* efpc, sfpc */
-	[INSTR_RRF_F0FF]  = { 0xff, F_16,F_24,F_28,0,0,0 },    /* e.g. madbr */
-	[INSTR_RRF_FUFF]  = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
-	[INSTR_RRF_RURR]  = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
-	[INSTR_RRF_R0RR]  = { 0xff, R_24,R_16,R_28,0,0,0 },    /* e.g. idte  */
-	[INSTR_RRF_U0FF]  = { 0xff, F_24,U4_16,F_28,0,0,0 },   /* e.g. fixr  */
-	[INSTR_RRF_U0RF]  = { 0xff, R_24,U4_16,F_28,0,0,0 },   /* e.g. cfebr */
-	[INSTR_RRF_M0RR]  = { 0xff, R_24,R_28,M_16,0,0,0 },    /* e.g. sske  */
-	[INSTR_RR_FF]	  = { 0xff, F_8,F_12,0,0,0,0 },        /* e.g. adr   */
-	[INSTR_RR_R0]	  = { 0xff, R_8, 0,0,0,0,0 },	       /* e.g. spm   */
-	[INSTR_RR_RR]	  = { 0xff, R_8,R_12,0,0,0,0 },        /* e.g. lr    */
-	[INSTR_RR_U0]	  = { 0xff, U8_8, 0,0,0,0,0 },	       /* e.g. svc   */
-	[INSTR_RR_UR]	  = { 0xff, U4_8,R_12,0,0,0,0 },       /* e.g. bcr   */
-	[INSTR_RSE_RRRD]  = { 0xff, R_8,R_12,D_20,B_16,0,0 },  /* e.g. lmh   */
-	[INSTR_RSE_CCRD]  = { 0xff, C_8,C_12,D_20,B_16,0,0 },  /* e.g. lmh   */
-	[INSTR_RSE_RURD]  = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icmh  */
-	[INSTR_RSL_R0RD]  = { 0xff, R_8,D_20,B_16,0,0,0 },     /* e.g. tp    */
-	[INSTR_RSI_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },   /* e.g. brxh  */
-	[INSTR_RSY_RRRD]  = { 0xff, R_8,R_12,D20_20,B_16,0,0 },/* e.g. stmy  */
+	[INSTR_E]	  = { 0xff, 0,0,0,0,0,0 },
+	[INSTR_RIE_R0UU]  = { 0xff, R_8,U16_16,U4_32,0,0,0 },
+	[INSTR_RIE_RRPU]  = { 0xff, R_8,R_12,U4_32,J16_16,0,0 },
+	[INSTR_RIE_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },
+	[INSTR_RIE_RRUUU] = { 0xff, R_8,R_12,U8_16,U8_24,U8_32,0 },
+	[INSTR_RIE_RUPI]  = { 0xff, R_8,I8_32,U4_12,J16_16,0,0 },
+	[INSTR_RIL_RI]	  = { 0x0f, R_8,I32_16,0,0,0,0 },
+	[INSTR_RIL_RP]	  = { 0x0f, R_8,J32_16,0,0,0,0 },
+	[INSTR_RIL_RU]	  = { 0x0f, R_8,U32_16,0,0,0,0 },
+	[INSTR_RIL_UP]	  = { 0x0f, U4_8,J32_16,0,0,0,0 },
+	[INSTR_RIS_R0RDU] = { 0xff, R_8,U8_32,D_20,B_16,0,0 },
+	[INSTR_RIS_RURDI] = { 0xff, R_8,I8_32,U4_12,D_20,B_16,0 },
+	[INSTR_RIS_RURDU] = { 0xff, R_8,U8_32,U4_12,D_20,B_16,0 },
+	[INSTR_RI_RI]	  = { 0x0f, R_8,I16_16,0,0,0,0 },
+	[INSTR_RI_RP]	  = { 0x0f, R_8,J16_16,0,0,0,0 },
+	[INSTR_RI_RU]	  = { 0x0f, R_8,U16_16,0,0,0,0 },
+	[INSTR_RI_UP]	  = { 0x0f, U4_8,J16_16,0,0,0,0 },
+	[INSTR_RRE_00]	  = { 0xff, 0,0,0,0,0,0 },
+	[INSTR_RRE_0R]	  = { 0xff, R_28,0,0,0,0,0 },
+	[INSTR_RRE_AA]	  = { 0xff, A_24,A_28,0,0,0,0 },
+	[INSTR_RRE_AR]	  = { 0xff, A_24,R_28,0,0,0,0 },
+	[INSTR_RRE_F0]	  = { 0xff, F_24,0,0,0,0,0 },
+	[INSTR_RRE_FF]	  = { 0xff, F_24,F_28,0,0,0,0 },
+	[INSTR_RRE_FR]	  = { 0xff, F_24,R_28,0,0,0,0 },
+	[INSTR_RRE_R0]	  = { 0xff, R_24,0,0,0,0,0 },
+	[INSTR_RRE_RA]	  = { 0xff, R_24,A_28,0,0,0,0 },
+	[INSTR_RRE_RF]	  = { 0xff, R_24,F_28,0,0,0,0 },
+	[INSTR_RRE_RR]	  = { 0xff, R_24,R_28,0,0,0,0 },
+	[INSTR_RRE_RR_OPT]= { 0xff, R_24,RO_28,0,0,0,0 },
+	[INSTR_RRF_0UFF]  = { 0xff, F_24,F_28,U4_20,0,0,0 },
+	[INSTR_RRF_F0FF2] = { 0xff, F_24,F_16,F_28,0,0,0 },
+	[INSTR_RRF_F0FF]  = { 0xff, F_16,F_24,F_28,0,0,0 },
+	[INSTR_RRF_F0FR]  = { 0xff, F_24,F_16,R_28,0,0,0 },
+	[INSTR_RRF_FFRU]  = { 0xff, F_24,F_16,R_28,U4_20,0,0 },
+	[INSTR_RRF_FUFF]  = { 0xff, F_24,F_16,F_28,U4_20,0,0 },
+	[INSTR_RRF_M0RR]  = { 0xff, R_24,R_28,M_16,0,0,0 },
+	[INSTR_RRF_R0RR]  = { 0xff, R_24,R_16,R_28,0,0,0 },
+	[INSTR_RRF_RURR]  = { 0xff, R_24,R_28,R_16,U4_20,0,0 },
+	[INSTR_RRF_U0FF]  = { 0xff, F_24,U4_16,F_28,0,0,0 },
+	[INSTR_RRF_U0RF]  = { 0xff, R_24,U4_16,F_28,0,0,0 },
+	[INSTR_RRF_U0RR]  = { 0xff, R_24,R_28,U4_16,0,0,0 },
+	[INSTR_RRF_UUFF]  = { 0xff, F_24,U4_16,F_28,U4_20,0,0 },
+	[INSTR_RRR_F0FF]  = { 0xff, F_24,F_28,F_16,0,0,0 },
+	[INSTR_RRS_RRRDU] = { 0xff, R_8,R_12,U4_32,D_20,B_16,0 },
+	[INSTR_RR_FF]	  = { 0xff, F_8,F_12,0,0,0,0 },
+	[INSTR_RR_R0]	  = { 0xff, R_8, 0,0,0,0,0 },
+	[INSTR_RR_RR]	  = { 0xff, R_8,R_12,0,0,0,0 },
+	[INSTR_RR_U0]	  = { 0xff, U8_8, 0,0,0,0,0 },
+	[INSTR_RR_UR]	  = { 0xff, U4_8,R_12,0,0,0,0 },
+	[INSTR_RSE_CCRD]  = { 0xff, C_8,C_12,D_20,B_16,0,0 },
+	[INSTR_RSE_RRRD]  = { 0xff, R_8,R_12,D_20,B_16,0,0 },
+	[INSTR_RSE_RURD]  = { 0xff, R_8,U4_12,D_20,B_16,0,0 },
+	[INSTR_RSI_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },
+	[INSTR_RSL_R0RD]  = { 0xff, D_20,L4_8,B_16,0,0,0 },
+	[INSTR_RSY_AARD]  = { 0xff, A_8,A_12,D20_20,B_16,0,0 },
+	[INSTR_RSY_CCRD]  = { 0xff, C_8,C_12,D20_20,B_16,0,0 },
+	[INSTR_RSY_RRRD]  = { 0xff, R_8,R_12,D20_20,B_16,0,0 },
 	[INSTR_RSY_RURD]  = { 0xff, R_8,U4_12,D20_20,B_16,0,0 },
-							       /* e.g. icmh  */
-	[INSTR_RSY_AARD]  = { 0xff, A_8,A_12,D20_20,B_16,0,0 },/* e.g. lamy  */
-	[INSTR_RSY_CCRD]  = { 0xff, C_8,C_12,D20_20,B_16,0,0 },/* e.g. lamy  */
-	[INSTR_RS_AARD]	  = { 0xff, A_8,A_12,D_20,B_16,0,0 },  /* e.g. lam   */
-	[INSTR_RS_CCRD]	  = { 0xff, C_8,C_12,D_20,B_16,0,0 },  /* e.g. lctl  */
-	[INSTR_RS_R0RD]	  = { 0xff, R_8,D_20,B_16,0,0,0 },     /* e.g. sll   */
-	[INSTR_RS_RRRD]	  = { 0xff, R_8,R_12,D_20,B_16,0,0 },  /* e.g. cs    */
-	[INSTR_RS_RURD]	  = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icm   */
-	[INSTR_RXE_FRRD]  = { 0xff, F_8,D_20,X_12,B_16,0,0 },  /* e.g. axbr  */
-	[INSTR_RXE_RRRD]  = { 0xff, R_8,D_20,X_12,B_16,0,0 },  /* e.g. lg    */
+	[INSTR_RS_AARD]	  = { 0xff, A_8,A_12,D_20,B_16,0,0 },
+	[INSTR_RS_CCRD]	  = { 0xff, C_8,C_12,D_20,B_16,0,0 },
+	[INSTR_RS_R0RD]	  = { 0xff, R_8,D_20,B_16,0,0,0 },
+	[INSTR_RS_RRRD]	  = { 0xff, R_8,R_12,D_20,B_16,0,0 },
+	[INSTR_RS_RURD]	  = { 0xff, R_8,U4_12,D_20,B_16,0,0 },
+	[INSTR_RXE_FRRD]  = { 0xff, F_8,D_20,X_12,B_16,0,0 },
+	[INSTR_RXE_RRRD]  = { 0xff, R_8,D_20,X_12,B_16,0,0 },
 	[INSTR_RXF_FRRDF] = { 0xff, F_32,F_8,D_20,X_12,B_16,0 },
-							       /* e.g. madb  */
-	[INSTR_RXY_RRRD]  = { 0xff, R_8,D20_20,X_12,B_16,0,0 },/* e.g. ly    */
-	[INSTR_RXY_FRRD]  = { 0xff, F_8,D20_20,X_12,B_16,0,0 },/* e.g. ley   */
-	[INSTR_RX_FRRD]	  = { 0xff, F_8,D_20,X_12,B_16,0,0 },  /* e.g. ae    */
-	[INSTR_RX_RRRD]	  = { 0xff, R_8,D_20,X_12,B_16,0,0 },  /* e.g. l     */
-	[INSTR_RX_URRD]	  = { 0xff, U4_8,D_20,X_12,B_16,0,0 }, /* e.g. bc    */
-	[INSTR_SI_URD]	  = { 0xff, D_20,B_16,U8_8,0,0,0 },    /* e.g. cli   */
-	[INSTR_SIY_URD]	  = { 0xff, D20_20,B_16,U8_8,0,0,0 },  /* e.g. tmy   */
-	[INSTR_SSE_RDRD]  = { 0xff, D_20,B_16,D_36,B_32,0,0 }, /* e.g. mvsdk */
+	[INSTR_RXY_FRRD]  = { 0xff, F_8,D20_20,X_12,B_16,0,0 },
+	[INSTR_RXY_RRRD]  = { 0xff, R_8,D20_20,X_12,B_16,0,0 },
+	[INSTR_RXY_URRD]  = { 0xff, U4_8,D20_20,X_12,B_16,0,0 },
+	[INSTR_RX_FRRD]	  = { 0xff, F_8,D_20,X_12,B_16,0,0 },
+	[INSTR_RX_RRRD]	  = { 0xff, R_8,D_20,X_12,B_16,0,0 },
+	[INSTR_RX_URRD]	  = { 0xff, U4_8,D_20,X_12,B_16,0,0 },
+	[INSTR_SIL_RDI]   = { 0xff, D_20,B_16,I16_32,0,0,0 },
+	[INSTR_SIL_RDU]   = { 0xff, D_20,B_16,U16_32,0,0,0 },
+	[INSTR_SIY_IRD]   = { 0xff, D20_20,B_16,I8_8,0,0,0 },
+	[INSTR_SIY_URD]	  = { 0xff, D20_20,B_16,U8_8,0,0,0 },
+	[INSTR_SI_URD]	  = { 0xff, D_20,B_16,U8_8,0,0,0 },
+	[INSTR_SSE_RDRD]  = { 0xff, D_20,B_16,D_36,B_32,0,0 },
+	[INSTR_SSF_RRDRD] = { 0x00, D_20,B_16,D_36,B_32,R_8,0 },
 	[INSTR_SS_L0RDRD] = { 0xff, D_20,L8_8,B_16,D_36,B_32,0 },
-							       /* e.g. mvc   */
 	[INSTR_SS_LIRDRD] = { 0xff, D_20,L4_8,B_16,D_36,B_32,U4_12 },
-							       /* e.g. srp   */
 	[INSTR_SS_LLRDRD] = { 0xff, D_20,L4_8,B_16,D_36,L4_12,B_32 },
-							       /* e.g. pack  */
-	[INSTR_SS_RRRDRD] = { 0xff, D_20,R_8,B_16,D_36,B_32,R_12 },
-							       /* e.g. mvck  */
 	[INSTR_SS_RRRDRD2]= { 0xff, R_8,D_20,B_16,R_12,D_36,B_32 },
-							       /* e.g. plo   */
 	[INSTR_SS_RRRDRD3]= { 0xff, R_8,R_12,D_20,B_16,D_36,B_32 },
-							       /* e.g. lmd   */
-	[INSTR_S_00]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. hsch  */
-	[INSTR_S_RD]	  = { 0xff, D_20,B_16,0,0,0,0 },       /* e.g. lpsw  */
-	[INSTR_SSF_RRDRD] = { 0x00, D_20,B_16,D_36,B_32,R_8,0 },
-							       /* e.g. mvcos */
+	[INSTR_SS_RRRDRD] = { 0xff, D_20,R_8,B_16,D_36,B_32,R_12 },
+	[INSTR_S_00]	  = { 0xff, 0,0,0,0,0,0 },
+	[INSTR_S_RD]	  = { 0xff, D_20,B_16,0,0,0,0 },
 };
 
 static struct insn opcode[] = {
@@ -454,6 +493,8 @@ static struct insn opcode[] = {
 static struct insn opcode_01[] = {
 #ifdef CONFIG_64BIT
 	{ "sam64", 0x0e, INSTR_E },
+	{ "pfpo", 0x0a, INSTR_E },
+	{ "ptff", 0x04, INSTR_E },
 #endif
 	{ "pr", 0x01, INSTR_E },
 	{ "upt", 0x02, INSTR_E },
@@ -519,6 +560,8 @@ static struct insn opcode_b2[] = {
 	{ "cutfu", 0xa7, INSTR_RRF_M0RR },
 	{ "stfle", 0xb0, INSTR_S_RD },
 	{ "lpswe", 0xb2, INSTR_S_RD },
+	{ "srnmt", 0xb9, INSTR_S_RD },
+	{ "lfas", 0xbd, INSTR_S_RD },
 #endif
 	{ "stidp", 0x02, INSTR_S_RD },
 	{ "sck", 0x04, INSTR_S_RD },
@@ -589,7 +632,6 @@ static struct insn opcode_b2[] = {
 	{ "clst", 0x5d, INSTR_RRE_RR },
 	{ "srst", 0x5e, INSTR_RRE_RR },
 	{ "cmpsc", 0x63, INSTR_RRE_RR },
-	{ "cmpsc", 0x63, INSTR_RRE_RR },
 	{ "siga", 0x74, INSTR_S_RD },
 	{ "xsch", 0x76, INSTR_S_00 },
 	{ "rp", 0x77, INSTR_S_RD },
@@ -630,6 +672,57 @@ static struct insn opcode_b3[] = {
 	{ "cger", 0xc8, INSTR_RRF_U0RF },
 	{ "cgdr", 0xc9, INSTR_RRF_U0RF },
 	{ "cgxr", 0xca, INSTR_RRF_U0RF },
+	{ "lpdfr", 0x70, INSTR_RRE_FF },
+	{ "lndfr", 0x71, INSTR_RRE_FF },
+	{ "cpsdr", 0x72, INSTR_RRF_F0FF2 },
+	{ "lcdfr", 0x73, INSTR_RRE_FF },
+	{ "ldgr", 0xc1, INSTR_RRE_FR },
+	{ "lgdr", 0xcd, INSTR_RRE_RF },
+	{ "adtr", 0xd2, INSTR_RRR_F0FF },
+	{ "axtr", 0xda, INSTR_RRR_F0FF },
+	{ "cdtr", 0xe4, INSTR_RRE_FF },
+	{ "cxtr", 0xec, INSTR_RRE_FF },
+	{ "kdtr", 0xe0, INSTR_RRE_FF },
+	{ "kxtr", 0xe8, INSTR_RRE_FF },
+	{ "cedtr", 0xf4, INSTR_RRE_FF },
+	{ "cextr", 0xfc, INSTR_RRE_FF },
+	{ "cdgtr", 0xf1, INSTR_RRE_FR },
+	{ "cxgtr", 0xf9, INSTR_RRE_FR },
+	{ "cdstr", 0xf3, INSTR_RRE_FR },
+	{ "cxstr", 0xfb, INSTR_RRE_FR },
+	{ "cdutr", 0xf2, INSTR_RRE_FR },
+	{ "cxutr", 0xfa, INSTR_RRE_FR },
+	{ "cgdtr", 0xe1, INSTR_RRF_U0RF },
+	{ "cgxtr", 0xe9, INSTR_RRF_U0RF },
+	{ "csdtr", 0xe3, INSTR_RRE_RF },
+	{ "csxtr", 0xeb, INSTR_RRE_RF },
+	{ "cudtr", 0xe2, INSTR_RRE_RF },
+	{ "cuxtr", 0xea, INSTR_RRE_RF },
+	{ "ddtr", 0xd1, INSTR_RRR_F0FF },
+	{ "dxtr", 0xd9, INSTR_RRR_F0FF },
+	{ "eedtr", 0xe5, INSTR_RRE_RF },
+	{ "eextr", 0xed, INSTR_RRE_RF },
+	{ "esdtr", 0xe7, INSTR_RRE_RF },
+	{ "esxtr", 0xef, INSTR_RRE_RF },
+	{ "iedtr", 0xf6, INSTR_RRF_F0FR },
+	{ "iextr", 0xfe, INSTR_RRF_F0FR },
+	{ "ltdtr", 0xd6, INSTR_RRE_FF },
+	{ "ltxtr", 0xde, INSTR_RRE_FF },
+	{ "fidtr", 0xd7, INSTR_RRF_UUFF },
+	{ "fixtr", 0xdf, INSTR_RRF_UUFF },
+	{ "ldetr", 0xd4, INSTR_RRF_0UFF },
+	{ "lxdtr", 0xdc, INSTR_RRF_0UFF },
+	{ "ledtr", 0xd5, INSTR_RRF_UUFF },
+	{ "ldxtr", 0xdd, INSTR_RRF_UUFF },
+	{ "mdtr", 0xd0, INSTR_RRR_F0FF },
+	{ "mxtr", 0xd8, INSTR_RRR_F0FF },
+	{ "qadtr", 0xf5, INSTR_RRF_FUFF },
+	{ "qaxtr", 0xfd, INSTR_RRF_FUFF },
+	{ "rrdtr", 0xf7, INSTR_RRF_FFRU },
+	{ "rrxtr", 0xff, INSTR_RRF_FFRU },
+	{ "sfasr", 0x85, INSTR_RRE_R0 },
+	{ "sdtr", 0xd3, INSTR_RRR_F0FF },
+	{ "sxtr", 0xdb, INSTR_RRR_F0FF },
 #endif
 	{ "lpebr", 0x00, INSTR_RRE_FF },
 	{ "lnebr", 0x01, INSTR_RRE_FF },
@@ -780,6 +873,14 @@ static struct insn opcode_b9[] = {
 	{ "cu24", 0xb1, INSTR_RRF_M0RR },
 	{ "cu41", 0xb2, INSTR_RRF_M0RR },
 	{ "cu42", 0xb3, INSTR_RRF_M0RR },
+	{ "crt", 0x72, INSTR_RRF_U0RR },
+	{ "cgrt", 0x60, INSTR_RRF_U0RR },
+	{ "clrt", 0x73, INSTR_RRF_U0RR },
+	{ "clgrt", 0x61, INSTR_RRF_U0RR },
+	{ "ptf", 0xa2, INSTR_RRE_R0 },
+	{ "pfmf", 0xaf, INSTR_RRE_RR },
+	{ "trte", 0xbf, INSTR_RRF_M0RR },
+	{ "trtre", 0xbd, INSTR_RRF_M0RR },
 #endif
 	{ "kmac", 0x1e, INSTR_RRE_RR },
 	{ "lrvr", 0x1f, INSTR_RRE_RR },
@@ -835,6 +936,43 @@ static struct insn opcode_c2[] = {
 	{ "cfi", 0x0d, INSTR_RIL_RI },
 	{ "clgfi", 0x0e, INSTR_RIL_RU },
 	{ "clfi", 0x0f, INSTR_RIL_RU },
+	{ "msfi", 0x01, INSTR_RIL_RI },
+	{ "msgfi", 0x00, INSTR_RIL_RI },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_c4[] = {
+#ifdef CONFIG_64BIT
+	{ "lrl", 0x0d, INSTR_RIL_RP },
+	{ "lgrl", 0x08, INSTR_RIL_RP },
+	{ "lgfrl", 0x0c, INSTR_RIL_RP },
+	{ "lhrl", 0x05, INSTR_RIL_RP },
+	{ "lghrl", 0x04, INSTR_RIL_RP },
+	{ "llgfrl", 0x0e, INSTR_RIL_RP },
+	{ "llhrl", 0x02, INSTR_RIL_RP },
+	{ "llghrl", 0x06, INSTR_RIL_RP },
+	{ "strl", 0x0f, INSTR_RIL_RP },
+	{ "stgrl", 0x0b, INSTR_RIL_RP },
+	{ "sthrl", 0x07, INSTR_RIL_RP },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_c6[] = {
+#ifdef CONFIG_64BIT
+	{ "crl", 0x0d, INSTR_RIL_RP },
+	{ "cgrl", 0x08, INSTR_RIL_RP },
+	{ "cgfrl", 0x0c, INSTR_RIL_RP },
+	{ "chrl", 0x05, INSTR_RIL_RP },
+	{ "cghrl", 0x04, INSTR_RIL_RP },
+	{ "clrl", 0x0f, INSTR_RIL_RP },
+	{ "clgrl", 0x0a, INSTR_RIL_RP },
+	{ "clgfrl", 0x0e, INSTR_RIL_RP },
+	{ "clhrl", 0x07, INSTR_RIL_RP },
+	{ "clghrl", 0x06, INSTR_RIL_RP },
+	{ "pfdrl", 0x02, INSTR_RIL_UP },
+	{ "exrl", 0x00, INSTR_RIL_RP },
 #endif
 	{ "", 0, INSTR_INVALID }
 };
@@ -842,6 +980,8 @@ static struct insn opcode_c2[] = {
 static struct insn opcode_c8[] = {
 #ifdef CONFIG_64BIT
 	{ "mvcos", 0x00, INSTR_SSF_RRDRD },
+	{ "ectg", 0x01, INSTR_SSF_RRDRD },
+	{ "csst", 0x02, INSTR_SSF_RRDRD },
 #endif
 	{ "", 0, INSTR_INVALID }
 };
@@ -917,6 +1057,12 @@ static struct insn opcode_e3[] = {
 	{ "llgh", 0x91, INSTR_RXY_RRRD },
 	{ "llc", 0x94, INSTR_RXY_RRRD },
 	{ "llh", 0x95, INSTR_RXY_RRRD },
+	{ "cgh", 0x34, INSTR_RXY_RRRD },
+	{ "laey", 0x75, INSTR_RXY_RRRD },
+	{ "ltgf", 0x32, INSTR_RXY_RRRD },
+	{ "mfy", 0x5c, INSTR_RXY_RRRD },
+	{ "mhy", 0x7c, INSTR_RXY_RRRD },
+	{ "pfd", 0x36, INSTR_RXY_URRD },
 #endif
 	{ "lrv", 0x1e, INSTR_RXY_RRRD },
 	{ "lrvh", 0x1f, INSTR_RXY_RRRD },
@@ -931,6 +1077,15 @@ static struct insn opcode_e3[] = {
 static struct insn opcode_e5[] = {
 #ifdef CONFIG_64BIT
 	{ "strag", 0x02, INSTR_SSE_RDRD },
+	{ "chhsi", 0x54, INSTR_SIL_RDI },
+	{ "chsi", 0x5c, INSTR_SIL_RDI },
+	{ "cghsi", 0x58, INSTR_SIL_RDI },
+	{ "clhhsi", 0x55, INSTR_SIL_RDU },
+	{ "clfhsi", 0x5d, INSTR_SIL_RDU },
+	{ "clghsi", 0x59, INSTR_SIL_RDU },
+	{ "mvhhi", 0x44, INSTR_SIL_RDI },
+	{ "mvhi", 0x4c, INSTR_SIL_RDI },
+	{ "mvghi", 0x48, INSTR_SIL_RDI },
 #endif
 	{ "lasp", 0x00, INSTR_SSE_RDRD },
 	{ "tprot", 0x01, INSTR_SSE_RDRD },
@@ -977,6 +1132,11 @@ static struct insn opcode_eb[] = {
 	{ "lmy", 0x98, INSTR_RSY_RRRD },
 	{ "lamy", 0x9a, INSTR_RSY_AARD },
 	{ "stamy", 0x9b, INSTR_RSY_AARD },
+	{ "asi", 0x6a, INSTR_SIY_IRD },
+	{ "agsi", 0x7a, INSTR_SIY_IRD },
+	{ "alsi", 0x6e, INSTR_SIY_IRD },
+	{ "algsi", 0x7e, INSTR_SIY_IRD },
+	{ "ecag", 0x4c, INSTR_RSY_RRRD },
 #endif
 	{ "rll", 0x1d, INSTR_RSY_RRRD },
 	{ "mvclu", 0x8e, INSTR_RSY_RRRD },
@@ -988,6 +1148,30 @@ static struct insn opcode_ec[] = {
 #ifdef CONFIG_64BIT
 	{ "brxhg", 0x44, INSTR_RIE_RRP },
 	{ "brxlg", 0x45, INSTR_RIE_RRP },
+	{ "crb", 0xf6, INSTR_RRS_RRRDU },
+	{ "cgrb", 0xe4, INSTR_RRS_RRRDU },
+	{ "crj", 0x76, INSTR_RIE_RRPU },
+	{ "cgrj", 0x64, INSTR_RIE_RRPU },
+	{ "cib", 0xfe, INSTR_RIS_RURDI },
+	{ "cgib", 0xfc, INSTR_RIS_RURDI },
+	{ "cij", 0x7e, INSTR_RIE_RUPI },
+	{ "cgij", 0x7c, INSTR_RIE_RUPI },
+	{ "cit", 0x72, INSTR_RIE_R0IU },
+	{ "cgit", 0x70, INSTR_RIE_R0IU },
+	{ "clrb", 0xf7, INSTR_RRS_RRRDU },
+	{ "clgrb", 0xe5, INSTR_RRS_RRRDU },
+	{ "clrj", 0x77, INSTR_RIE_RRPU },
+	{ "clgrj", 0x65, INSTR_RIE_RRPU },
+	{ "clib", 0xff, INSTR_RIS_RURDU },
+	{ "clgib", 0xfd, INSTR_RIS_RURDU },
+	{ "clij", 0x7f, INSTR_RIE_RUPU },
+	{ "clgij", 0x7d, INSTR_RIE_RUPU },
+	{ "clfit", 0x73, INSTR_RIE_R0UU },
+	{ "clgit", 0x71, INSTR_RIE_R0UU },
+	{ "rnsbg", 0x54, INSTR_RIE_RRUUU },
+	{ "rxsbg", 0x57, INSTR_RIE_RRUUU },
+	{ "rosbg", 0x56, INSTR_RIE_RRUUU },
+	{ "risbg", 0x55, INSTR_RIE_RRUUU },
 #endif
 	{ "", 0, INSTR_INVALID }
 };
@@ -1004,6 +1188,16 @@ static struct insn opcode_ed[] = {
 	{ "ldy", 0x65, INSTR_RXY_FRRD },
 	{ "stey", 0x66, INSTR_RXY_FRRD },
 	{ "stdy", 0x67, INSTR_RXY_FRRD },
+	{ "sldt", 0x40, INSTR_RXF_FRRDF },
+	{ "slxt", 0x48, INSTR_RXF_FRRDF },
+	{ "srdt", 0x41, INSTR_RXF_FRRDF },
+	{ "srxt", 0x49, INSTR_RXF_FRRDF },
+	{ "tdcet", 0x50, INSTR_RXE_FRRD },
+	{ "tdcdt", 0x54, INSTR_RXE_FRRD },
+	{ "tdcxt", 0x58, INSTR_RXE_FRRD },
+	{ "tdget", 0x51, INSTR_RXE_FRRD },
+	{ "tdgdt", 0x55, INSTR_RXE_FRRD },
+	{ "tdgxt", 0x59, INSTR_RXE_FRRD },
 #endif
 	{ "ldeb", 0x04, INSTR_RXE_FRRD },
 	{ "lxdb", 0x05, INSTR_RXE_FRRD },
@@ -1037,6 +1231,7 @@ static struct insn opcode_ed[] = {
 	{ "mae", 0x2e, INSTR_RXF_FRRDF },
 	{ "mse", 0x2f, INSTR_RXF_FRRDF },
 	{ "sqe", 0x34, INSTR_RXE_FRRD },
+	{ "sqd", 0x35, INSTR_RXE_FRRD },
 	{ "mee", 0x37, INSTR_RXE_FRRD },
 	{ "mad", 0x3e, INSTR_RXF_FRRDF },
 	{ "msd", 0x3f, INSTR_RXF_FRRDF },
@@ -1117,6 +1312,12 @@ static struct insn *find_insn(unsigned char *code)
 	case 0xc2:
 		table = opcode_c2;
 		break;
+	case 0xc4:
+		table = opcode_c4;
+		break;
+	case 0xc6:
+		table = opcode_c6;
+		break;
 	case 0xc8:
 		table = opcode_c8;
 		break;
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index e49e9e0..c00856a 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -82,7 +82,8 @@ asm(
 	"	lm	6,15,24(15)\n"
 #endif
 	"	br	14\n"
-	"	.size	savesys_ipl_nss, .-savesys_ipl_nss\n");
+	"	.size	savesys_ipl_nss, .-savesys_ipl_nss\n"
+	"	.previous\n");
 
 static __initdata char upper_command_line[COMMAND_LINE_SIZE];
 
@@ -214,10 +215,13 @@ static __initdata struct sysinfo_3_2_2 vmms __aligned(PAGE_SIZE);
 
 static noinline __init void detect_machine_type(void)
 {
-	/* No VM information? Looks like LPAR */
-	if (stsi(&vmms, 3, 2, 2) == -ENOSYS)
+	/* Check current-configuration-level */
+	if ((stsi(NULL, 0, 0, 0) >> 28) <= 2) {
+		S390_lowcore.machine_flags |= MACHINE_FLAG_LPAR;
 		return;
-	if (!vmms.count)
+	}
+	/* Get virtual-machine cpu information. */
+	if (stsi(&vmms, 3, 2, 2) == -ENOSYS || !vmms.count)
 		return;
 
 	/* Running under KVM? If not we assume z/VM */
@@ -352,6 +356,7 @@ static __init void detect_machine_facilities(void)
 {
 #ifdef CONFIG_64BIT
 	unsigned int facilities;
+	unsigned long long facility_bits;
 
 	facilities = stfl();
 	if (facilities & (1 << 28))
@@ -360,6 +365,9 @@ static __init void detect_machine_facilities(void)
 		S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
 	if (facilities & (1 << 4))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
+	if ((stfle(&facility_bits, 1) > 0) &&
+	    (facility_bits & (1ULL << (63 - 40))))
+		S390_lowcore.machine_flags |= MACHINE_FLAG_SPP;
 #endif
 }
 
@@ -402,8 +410,19 @@ static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t))
 
 static void __init setup_boot_command_line(void)
 {
+	int i;
+
+	/* convert arch command line to ascii */
+	for (i = 0; i < ARCH_COMMAND_LINE_SIZE; i++)
+		if (COMMAND_LINE[i] & 0x80)
+			break;
+	if (i < ARCH_COMMAND_LINE_SIZE)
+		EBCASC(COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
+	COMMAND_LINE[ARCH_COMMAND_LINE_SIZE-1] = 0;
+
 	/* copy arch command line */
-	strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
+	strlcpy(boot_command_line, strstrip(COMMAND_LINE),
+		ARCH_COMMAND_LINE_SIZE);
 
 	/* append IPL PARM data to the boot command line */
 	if (MACHINE_IS_VM)
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index e8ef21c..bea9ee3 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/cache.h>
-#include <asm/lowcore.h>
 #include <asm/errno.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
@@ -74,21 +73,24 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	basr	%r14,%r1
 	.endm
 
-	.macro	TRACE_IRQS_CHECK
-	basr	%r2,%r0
+	.macro	TRACE_IRQS_CHECK_ON
 	tm	SP_PSW(%r15),0x03	# irqs enabled?
-	jz	0f
-	l	%r1,BASED(.Ltrace_irq_on_caller)
-	basr	%r14,%r1
-	j	1f
-0:	l	%r1,BASED(.Ltrace_irq_off_caller)
-	basr	%r14,%r1
-1:
+	bz	BASED(0f)
+	TRACE_IRQS_ON
+0:
+	.endm
+
+	.macro	TRACE_IRQS_CHECK_OFF
+	tm	SP_PSW(%r15),0x03	# irqs enabled?
+	bz	BASED(0f)
+	TRACE_IRQS_OFF
+0:
 	.endm
 #else
 #define TRACE_IRQS_ON
 #define TRACE_IRQS_OFF
-#define TRACE_IRQS_CHECK
+#define TRACE_IRQS_CHECK_ON
+#define TRACE_IRQS_CHECK_OFF
 #endif
 
 #ifdef CONFIG_LOCKDEP
@@ -178,9 +180,9 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	mvc	SP_PSW(8,%r15),0(%r12)	# move user PSW to stack
 	st	%r2,SP_ORIG_R2(%r15)	# store original content of gpr 2
-	icm	%r12,3,__LC_SVC_ILC
+	icm	%r12,12,__LC_SVC_ILC
 	stm	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
-	st	%r12,SP_SVCNR(%r15)
+	st	%r12,SP_ILC(%r15)
 	mvc	SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
 	la	%r12,0
 	st	%r12,__SF_BACKCHAIN(%r15)	# clear back chain
@@ -274,66 +276,45 @@ sysc_do_restart:
 	st	%r2,SP_R2(%r15)   # store return value (change R2 on stack)
 
 sysc_return:
+	LOCKDEP_SYS_EXIT
+sysc_tif:
 	tm	__TI_flags+3(%r9),_TIF_WORK_SVC
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(sysc_restore_trace_psw_addr)
-	l	%r1,0(%r1)
-	lpsw	0(%r1)
-sysc_restore_trace:
-	TRACE_IRQS_CHECK
-	LOCKDEP_SYS_EXIT
-#endif
-sysc_leave:
 	RESTORE_ALL __LC_RETURN_PSW,1
 sysc_done:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-sysc_restore_trace_psw_addr:
-	.long sysc_restore_trace_psw
-
-	.section .data,"aw",@progbits
-	.align	8
-	.globl	sysc_restore_trace_psw
-sysc_restore_trace_psw:
-	.long	0, sysc_restore_trace + 0x80000000
-	.previous
-#endif
-
 #
-# recheck if there is more work to do
-#
-sysc_work_loop:
-	tm	__TI_flags+3(%r9),_TIF_WORK_SVC
-	bz	BASED(sysc_restore)	# there is no work to do
-#
-# One of the work bits is on. Find out which one.
+# There is work to do, but first we need to check if we return to userspace.
 #
 sysc_work:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
 	bno	BASED(sysc_restore)
+
+#
+# One of the work bits is on. Find out which one.
+#
+sysc_work_tif:
 	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
 	bo	BASED(sysc_mcck_pending)
 	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
 	bo	BASED(sysc_reschedule)
 	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
-	bnz	BASED(sysc_sigpending)
+	bo	BASED(sysc_sigpending)
 	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
-	bnz	BASED(sysc_notify_resume)
+	bo	BASED(sysc_notify_resume)
 	tm	__TI_flags+3(%r9),_TIF_RESTART_SVC
 	bo	BASED(sysc_restart)
 	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
 	bo	BASED(sysc_singlestep)
-	b	BASED(sysc_restore)
-sysc_work_done:
+	b	BASED(sysc_return)	# beware of critical section cleanup
 
 #
 # _TIF_NEED_RESCHED is set, call schedule
 #
 sysc_reschedule:
 	l	%r1,BASED(.Lschedule)
-	la	%r14,BASED(sysc_work_loop)
+	la	%r14,BASED(sysc_return)
 	br	%r1			# call scheduler
 
 #
@@ -341,7 +322,7 @@ sysc_reschedule:
 #
 sysc_mcck_pending:
 	l	%r1,BASED(.Ls390_handle_mcck)
-	la	%r14,BASED(sysc_work_loop)
+	la	%r14,BASED(sysc_return)
 	br	%r1			# TIF bit will be cleared by handler
 
 #
@@ -356,7 +337,7 @@ sysc_sigpending:
 	bo	BASED(sysc_restart)
 	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
 	bo	BASED(sysc_singlestep)
-	b	BASED(sysc_work_loop)
+	b	BASED(sysc_return)
 
 #
 # _TIF_NOTIFY_RESUME is set, call do_notify_resume
@@ -364,7 +345,7 @@ sysc_sigpending:
 sysc_notify_resume:
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	l	%r1,BASED(.Ldo_notify_resume)
-	la	%r14,BASED(sysc_work_loop)
+	la	%r14,BASED(sysc_return)
 	br	%r1			# call do_notify_resume
 
 
@@ -459,11 +440,13 @@ kernel_execve:
 	br	%r14
 	# execve succeeded.
 0:	stnsm	__SF_EMPTY(%r15),0xfc	# disable interrupts
+	TRACE_IRQS_OFF
 	l	%r15,__LC_KERNEL_STACK	# load ksp
 	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	l	%r9,__LC_THREAD_INFO
 	mvc	SP_PTREGS(__PT_SIZE,%r15),0(%r12)	# copy pt_regs
 	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
+	TRACE_IRQS_ON
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	l	%r1,BASED(.Lexecve_tail)
 	basr	%r14,%r1
@@ -500,8 +483,8 @@ pgm_check_handler:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 pgm_no_vtime:
+	TRACE_IRQS_CHECK_OFF
 	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	TRACE_IRQS_OFF
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	la	%r8,0x7f
 	nr	%r8,%r3
@@ -510,8 +493,10 @@ pgm_do_call:
 	sll	%r8,2
 	l	%r7,0(%r8,%r7)		# load address of handler routine
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	la	%r14,BASED(sysc_return)
-	br	%r7			# branch to interrupt-handler
+	basr	%r14,%r7		# branch to interrupt-handler
+pgm_exit:
+	TRACE_IRQS_CHECK_ON
+	b	BASED(sysc_return)
 
 #
 # handle per exception
@@ -538,20 +523,28 @@ pgm_per_std:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 pgm_no_vtime2:
+	TRACE_IRQS_CHECK_OFF
 	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	TRACE_IRQS_OFF
 	l	%r1,__TI_task(%r9)
+	tm	SP_PSW+1(%r15),0x01	# kernel per event ?
+	bz	BASED(kernel_per)
 	mvc	__THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
 	mvc	__THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
 	mvc	__THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
 	oi	__TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
-	tm	SP_PSW+1(%r15),0x01	# kernel per event ?
-	bz	BASED(kernel_per)
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	la	%r8,0x7f
 	nr	%r8,%r3 		# clear per-event-bit and ilc
-	be	BASED(sysc_return)	# only per or per+check ?
-	b	BASED(pgm_do_call)
+	be	BASED(pgm_exit2)	# only per or per+check ?
+	l	%r7,BASED(.Ljump_table)
+	sll	%r8,2
+	l	%r7,0(%r8,%r7)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r7		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	b	BASED(sysc_return)
 
 #
 # it was a single stepped SVC that is causing all the trouble
@@ -571,8 +564,8 @@ pgm_svcper:
 	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
 	oi	__TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
 	TRACE_IRQS_ON
-	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	b	BASED(sysc_do_svc)
 
 #
@@ -583,8 +576,8 @@ kernel_per:
 	mvi	SP_SVCNR+1(%r15),0xff
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r1,BASED(.Lhandle_per)	# load adr. of per handler
-	la	%r14,BASED(sysc_restore)# load adr. of system return
-	br	%r1			# branch to do_single_step
+	basr	%r14,%r1		# branch to do_single_step
+	b	BASED(pgm_exit)
 
 /*
  * IO interrupt handler routine
@@ -603,134 +596,126 @@ io_int_handler:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
 io_no_vtime:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	TRACE_IRQS_OFF
+	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	l	%r1,BASED(.Ldo_IRQ)	# load address of do_IRQ
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	basr	%r14,%r1		# branch to standard irq handler
 io_return:
+	LOCKDEP_SYS_EXIT
+	TRACE_IRQS_ON
+io_tif:
 	tm	__TI_flags+3(%r9),_TIF_WORK_INT
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(io_restore_trace_psw_addr)
-	l	%r1,0(%r1)
-	lpsw	0(%r1)
-io_restore_trace:
-	TRACE_IRQS_CHECK
-	LOCKDEP_SYS_EXIT
-#endif
-io_leave:
 	RESTORE_ALL __LC_RETURN_PSW,0
 io_done:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-io_restore_trace_psw_addr:
-	.long io_restore_trace_psw
-
-	.section .data,"aw",@progbits
-	.align	8
-	.globl	io_restore_trace_psw
-io_restore_trace_psw:
-	.long	0, io_restore_trace + 0x80000000
-	.previous
-#endif
-
 #
-# switch to kernel stack, then check the TIF bits
+# There is work todo, find out in which context we have been interrupted:
+# 1) if we return to user space we can do all _TIF_WORK_INT work
+# 2) if we return to kernel code and preemptive scheduling is enabled check
+#    the preemption counter and if it is zero call preempt_schedule_irq
+# Before any work can be done, a switch to the kernel stack is required.
 #
 io_work:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-#ifndef CONFIG_PREEMPT
-	bno	BASED(io_restore)	# no-> skip resched & signal
-#else
-	bnz	BASED(io_work_user)	# no -> check for preemptive scheduling
+	bo	BASED(io_work_user)	# yes -> do resched & signal
+#ifdef CONFIG_PREEMPT
 	# check for preemptive scheduling
 	icm	%r0,15,__TI_precount(%r9)
 	bnz	BASED(io_restore)	# preemption disabled
+	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
+	bno	BASED(io_restore)
+	# switch to kernel stack
 	l	%r1,SP_R15(%r15)
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
 	xc	__SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lr	%r15,%r1
-io_resume_loop:
-	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
-	bno	BASED(io_restore)
+	# TRACE_IRQS_ON already done at io_return, call
+	# TRACE_IRQS_OFF to keep things symmetrical
+	TRACE_IRQS_OFF
 	l	%r1,BASED(.Lpreempt_schedule_irq)
-	la	%r14,BASED(io_resume_loop)
-	br	%r1			# call schedule
+	basr	%r14,%r1		# call preempt_schedule_irq
+	b	BASED(io_return)
+#else
+	b	BASED(io_restore)
 #endif
 
+#
+# Need to do work before returning to userspace, switch to kernel stack
+#
 io_work_user:
 	l	%r1,__LC_KERNEL_STACK
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
 	xc	__SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lr	%r15,%r1
+
 #
 # One of the work bits is on. Find out which one.
-# Checked are: _TIF_SIGPENDING, _TIF_NEED_RESCHED
+# Checked are: _TIF_SIGPENDING, _TIF_NOTIFY_RESUME, _TIF_NEED_RESCHED
 #		and _TIF_MCCK_PENDING
 #
-io_work_loop:
+io_work_tif:
 	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
 	bo	BASED(io_mcck_pending)
 	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
 	bo	BASED(io_reschedule)
 	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
-	bnz	BASED(io_sigpending)
+	bo	BASED(io_sigpending)
 	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
-	bnz	BASED(io_notify_resume)
-	b	BASED(io_restore)
-io_work_done:
+	bo	BASED(io_notify_resume)
+	b	BASED(io_return)	# beware of critical section cleanup
 
 #
 # _TIF_MCCK_PENDING is set, call handler
 #
 io_mcck_pending:
+	# TRACE_IRQS_ON already done at io_return
 	l	%r1,BASED(.Ls390_handle_mcck)
 	basr	%r14,%r1		# TIF bit will be cleared by handler
-	b	BASED(io_work_loop)
+	TRACE_IRQS_OFF
+	b	BASED(io_return)
 
 #
 # _TIF_NEED_RESCHED is set, call schedule
 #
 io_reschedule:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	l	%r1,BASED(.Lschedule)
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	basr	%r14,%r1		# call scheduler
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	tm	__TI_flags+3(%r9),_TIF_WORK_INT
-	bz	BASED(io_restore)	# there is no work to do
-	b	BASED(io_work_loop)
+	b	BASED(io_return)
 
 #
 # _TIF_SIGPENDING is set, call do_signal
 #
 io_sigpending:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	l	%r1,BASED(.Ldo_signal)
 	basr	%r14,%r1		# call do_signal
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	b	BASED(io_work_loop)
+	b	BASED(io_return)
 
 #
 # _TIF_SIGPENDING is set, call do_signal
 #
 io_notify_resume:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	l	%r1,BASED(.Ldo_notify_resume)
 	basr	%r14,%r1		# call do_signal
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	b	BASED(io_work_loop)
+	b	BASED(io_return)
 
 /*
  * External interrupt handler routine
@@ -765,15 +750,14 @@ __critical_end:
 
 	.globl mcck_int_handler
 mcck_int_handler:
-	stck	__LC_INT_CLOCK
+	stck	__LC_MCCK_CLOCK
 	spt	__LC_CPU_TIMER_SAVE_AREA	# revalidate cpu timer
 	lm	%r0,%r15,__LC_GPREGS_SAVE_AREA	# revalidate gprs
 	SAVE_ALL_BASE __LC_SAVE_AREA+32
 	la	%r12,__LC_MCK_OLD_PSW
 	tm	__LC_MCCK_CODE,0x80	# system damage?
 	bo	BASED(mcck_int_main)	# yes -> rest of mcck code invalid
-	mvc	__LC_SAVE_AREA+52(8),__LC_ASYNC_ENTER_TIMER
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA
+	mvc	__LC_MCCK_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA
 	tm	__LC_MCCK_CODE+5,0x02	# stored cpu timer value valid?
 	bo	BASED(1f)
 	la	%r14,__LC_SYNC_ENTER_TIMER
@@ -787,7 +771,7 @@ mcck_int_handler:
 	bl	BASED(0f)
 	la	%r14,__LC_LAST_UPDATE_TIMER
 0:	spt	0(%r14)
-	mvc	__LC_ASYNC_ENTER_TIMER(8),0(%r14)
+	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
 1:	tm	__LC_MCCK_CODE+2,0x09	# mwp + ia of old psw valid?
 	bno	BASED(mcck_int_main)	# no -> skip cleanup critical
 	tm	__LC_MCK_OLD_PSW+1,0x01	# test problem state bit
@@ -809,9 +793,9 @@ mcck_int_main:
 	bno	BASED(mcck_no_vtime)	# no -> skip cleanup critical
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(mcck_no_vtime)
-	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
+	UPDATE_VTIME __LC_EXIT_TIMER,__LC_MCCK_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
-	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_MCCK_ENTER_TIMER
 mcck_no_vtime:
 	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
@@ -834,7 +818,6 @@ mcck_no_vtime:
 mcck_return:
 	mvc	__LC_RETURN_MCCK_PSW(8),SP_PSW(%r15) # move return PSW
 	ni	__LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_SAVE_AREA+52
 	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
 	bno	BASED(0f)
 	lm	%r0,%r15,SP_R0(%r15)	# load gprs 0-15
@@ -918,18 +901,14 @@ stack_overflow:
 
 cleanup_table_system_call:
 	.long	system_call + 0x80000000, sysc_do_svc + 0x80000000
-cleanup_table_sysc_return:
-	.long	sysc_return + 0x80000000, sysc_leave + 0x80000000
-cleanup_table_sysc_leave:
-	.long	sysc_leave + 0x80000000, sysc_done + 0x80000000
-cleanup_table_sysc_work_loop:
-	.long	sysc_work_loop + 0x80000000, sysc_work_done + 0x80000000
-cleanup_table_io_return:
-	.long	io_return + 0x80000000, io_leave + 0x80000000
-cleanup_table_io_leave:
-	.long	io_leave + 0x80000000, io_done + 0x80000000
-cleanup_table_io_work_loop:
-	.long	io_work_loop + 0x80000000, io_work_done + 0x80000000
+cleanup_table_sysc_tif:
+	.long	sysc_tif + 0x80000000, sysc_restore + 0x80000000
+cleanup_table_sysc_restore:
+	.long	sysc_restore + 0x80000000, sysc_done + 0x80000000
+cleanup_table_io_tif:
+	.long	io_tif + 0x80000000, io_restore + 0x80000000
+cleanup_table_io_restore:
+	.long	io_restore + 0x80000000, io_done + 0x80000000
 
 cleanup_critical:
 	clc	4(4,%r12),BASED(cleanup_table_system_call)
@@ -937,49 +916,40 @@ cleanup_critical:
 	clc	4(4,%r12),BASED(cleanup_table_system_call+4)
 	bl	BASED(cleanup_system_call)
 0:
-	clc	4(4,%r12),BASED(cleanup_table_sysc_return)
-	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_sysc_return+4)
-	bl	BASED(cleanup_sysc_return)
-0:
-	clc	4(4,%r12),BASED(cleanup_table_sysc_leave)
+	clc	4(4,%r12),BASED(cleanup_table_sysc_tif)
 	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_sysc_leave+4)
-	bl	BASED(cleanup_sysc_leave)
+	clc	4(4,%r12),BASED(cleanup_table_sysc_tif+4)
+	bl	BASED(cleanup_sysc_tif)
 0:
-	clc	4(4,%r12),BASED(cleanup_table_sysc_work_loop)
+	clc	4(4,%r12),BASED(cleanup_table_sysc_restore)
 	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_sysc_work_loop+4)
-	bl	BASED(cleanup_sysc_return)
+	clc	4(4,%r12),BASED(cleanup_table_sysc_restore+4)
+	bl	BASED(cleanup_sysc_restore)
 0:
-	clc	4(4,%r12),BASED(cleanup_table_io_return)
+	clc	4(4,%r12),BASED(cleanup_table_io_tif)
 	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_io_return+4)
-	bl	BASED(cleanup_io_return)
+	clc	4(4,%r12),BASED(cleanup_table_io_tif+4)
+	bl	BASED(cleanup_io_tif)
 0:
-	clc	4(4,%r12),BASED(cleanup_table_io_leave)
+	clc	4(4,%r12),BASED(cleanup_table_io_restore)
 	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_io_leave+4)
-	bl	BASED(cleanup_io_leave)
-0:
-	clc	4(4,%r12),BASED(cleanup_table_io_work_loop)
-	bl	BASED(0f)
-	clc	4(4,%r12),BASED(cleanup_table_io_work_loop+4)
-	bl	BASED(cleanup_io_return)
+	clc	4(4,%r12),BASED(cleanup_table_io_restore+4)
+	bl	BASED(cleanup_io_restore)
 0:
 	br	%r14
 
 cleanup_system_call:
 	mvc	__LC_RETURN_PSW(8),0(%r12)
-	c	%r12,BASED(.Lmck_old_psw)
-	be	BASED(0f)
-	la	%r12,__LC_SAVE_AREA+16
-	b	BASED(1f)
-0:	la	%r12,__LC_SAVE_AREA+32
-1:
 	clc	__LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+4)
 	bh	BASED(0f)
+	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER
+	c	%r12,BASED(.Lmck_old_psw)
+	be	BASED(0f)
 	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
+0:	c	%r12,BASED(.Lmck_old_psw)
+	la	%r12,__LC_SAVE_AREA+32
+	be	BASED(0f)
+	la	%r12,__LC_SAVE_AREA+16
 0:	clc	__LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+8)
 	bhe	BASED(cleanup_vtime)
 	clc	__LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn)
@@ -1012,55 +982,54 @@ cleanup_system_call_insn:
 	.long	sysc_stime + 0x80000000
 	.long	sysc_update + 0x80000000
 
-cleanup_sysc_return:
+cleanup_sysc_tif:
 	mvc	__LC_RETURN_PSW(4),0(%r12)
-	mvc	__LC_RETURN_PSW+4(4),BASED(cleanup_table_sysc_return)
+	mvc	__LC_RETURN_PSW+4(4),BASED(cleanup_table_sysc_tif)
 	la	%r12,__LC_RETURN_PSW
 	br	%r14
 
-cleanup_sysc_leave:
-	clc	4(4,%r12),BASED(cleanup_sysc_leave_insn)
+cleanup_sysc_restore:
+	clc	4(4,%r12),BASED(cleanup_sysc_restore_insn)
 	be	BASED(2f)
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+	c	%r12,BASED(.Lmck_old_psw)
+	be	BASED(0f)
 	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
-	clc	4(4,%r12),BASED(cleanup_sysc_leave_insn+4)
+0:	clc	4(4,%r12),BASED(cleanup_sysc_restore_insn+4)
 	be	BASED(2f)
 	mvc	__LC_RETURN_PSW(8),SP_PSW(%r15)
 	c	%r12,BASED(.Lmck_old_psw)
-	bne	BASED(0f)
-	mvc	__LC_SAVE_AREA+32(16),SP_R12(%r15)
-	b	BASED(1f)
-0:	mvc	__LC_SAVE_AREA+16(16),SP_R12(%r15)
-1:	lm	%r0,%r11,SP_R0(%r15)
+	la	%r12,__LC_SAVE_AREA+32
+	be	BASED(1f)
+	la	%r12,__LC_SAVE_AREA+16
+1:	mvc	0(16,%r12),SP_R12(%r15)
+	lm	%r0,%r11,SP_R0(%r15)
 	l	%r15,SP_R15(%r15)
 2:	la	%r12,__LC_RETURN_PSW
 	br	%r14
-cleanup_sysc_leave_insn:
+cleanup_sysc_restore_insn:
 	.long	sysc_done - 4 + 0x80000000
 	.long	sysc_done - 8 + 0x80000000
 
-cleanup_io_return:
+cleanup_io_tif:
 	mvc	__LC_RETURN_PSW(4),0(%r12)
-	mvc	__LC_RETURN_PSW+4(4),BASED(cleanup_table_io_work_loop)
+	mvc	__LC_RETURN_PSW+4(4),BASED(cleanup_table_io_tif)
 	la	%r12,__LC_RETURN_PSW
 	br	%r14
 
-cleanup_io_leave:
-	clc	4(4,%r12),BASED(cleanup_io_leave_insn)
-	be	BASED(2f)
-	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
-	clc	4(4,%r12),BASED(cleanup_io_leave_insn+4)
-	be	BASED(2f)
+cleanup_io_restore:
+	clc	4(4,%r12),BASED(cleanup_io_restore_insn)
+	be	BASED(1f)
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+	clc	4(4,%r12),BASED(cleanup_io_restore_insn+4)
+	be	BASED(1f)
 	mvc	__LC_RETURN_PSW(8),SP_PSW(%r15)
-	c	%r12,BASED(.Lmck_old_psw)
-	bne	BASED(0f)
 	mvc	__LC_SAVE_AREA+32(16),SP_R12(%r15)
-	b	BASED(1f)
-0:	mvc	__LC_SAVE_AREA+16(16),SP_R12(%r15)
-1:	lm	%r0,%r11,SP_R0(%r15)
+	lm	%r0,%r11,SP_R0(%r15)
 	l	%r15,SP_R15(%r15)
-2:	la	%r12,__LC_RETURN_PSW
+1:	la	%r12,__LC_RETURN_PSW
 	br	%r14
-cleanup_io_leave_insn:
+cleanup_io_restore_insn:
 	.long	io_done - 4 + 0x80000000
 	.long	io_done - 8 + 0x80000000
 
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index e1e5e76..eb15c12 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -24,17 +24,13 @@ int __cpuinit start_secondary(void *cpuvoid);
 void __init startup_init(void);
 void die(const char * str, struct pt_regs * regs, long err);
 
-struct new_utsname;
-struct mmap_arg_struct;
+struct s390_mmap_arg_struct;
 struct fadvise64_64_args;
 struct old_sigaction;
-struct sel_arg_struct;
 
-long sys_mmap2(struct mmap_arg_struct __user  *arg);
-long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
-long sys_ipc(uint call, int first, unsigned long second,
+long sys_mmap2(struct s390_mmap_arg_struct __user  *arg);
+long sys_s390_ipc(uint call, int first, unsigned long second,
 	     unsigned long third, void __user *ptr);
-long sys_s390_newuname(struct new_utsname __user *name);
 long sys_s390_personality(unsigned long personality);
 long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
 		    size_t len, int advice);
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index f33658f..8bccec1 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -2,18 +2,16 @@
  *  arch/s390/kernel/entry64.S
  *    S390 low-level entry points.
  *
- *    Copyright (C) IBM Corp. 1999,2006
+ *    Copyright (C) IBM Corp. 1999,2010
  *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
  *		 Hartmut Penner (hp@de.ibm.com),
  *		 Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/cache.h>
-#include <asm/lowcore.h>
 #include <asm/errno.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
@@ -61,30 +59,45 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
 
 #define BASED(name) name-system_call(%r13)
 
+	.macro	HANDLE_SIE_INTERCEPT
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+	lg	%r3,__LC_SIE_HOOK
+	ltgr	%r3,%r3
+	jz	0f
+	basr	%r14,%r3
+0:
+#endif
+	.endm
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	.macro	TRACE_IRQS_ON
-	 basr	%r2,%r0
-	 brasl	%r14,trace_hardirqs_on_caller
+	basr	%r2,%r0
+	brasl	%r14,trace_hardirqs_on_caller
 	.endm
 
 	.macro	TRACE_IRQS_OFF
-	 basr	%r2,%r0
-	 brasl	%r14,trace_hardirqs_off_caller
+	basr	%r2,%r0
+	brasl	%r14,trace_hardirqs_off_caller
 	.endm
 
-	.macro TRACE_IRQS_CHECK
-	basr	%r2,%r0
+	.macro TRACE_IRQS_CHECK_ON
 	tm	SP_PSW(%r15),0x03	# irqs enabled?
 	jz	0f
-	brasl	%r14,trace_hardirqs_on_caller
-	j	1f
-0:	brasl	%r14,trace_hardirqs_off_caller
-1:
+	TRACE_IRQS_ON
+0:
+	.endm
+
+	.macro TRACE_IRQS_CHECK_OFF
+	tm	SP_PSW(%r15),0x03	# irqs enabled?
+	jz	0f
+	TRACE_IRQS_OFF
+0:
 	.endm
 #else
 #define TRACE_IRQS_ON
 #define TRACE_IRQS_OFF
-#define TRACE_IRQS_CHECK
+#define TRACE_IRQS_CHECK_ON
+#define TRACE_IRQS_CHECK_OFF
 #endif
 
 #ifdef CONFIG_LOCKDEP
@@ -113,31 +126,35 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
  *    R15 - kernel stack pointer
  */
 
-	.macro	SAVE_ALL_BASE savearea
-	stmg	%r12,%r15,\savearea
-	larl	%r13,system_call
-	.endm
-
 	.macro	SAVE_ALL_SVC psworg,savearea
-	la	%r12,\psworg
+	stmg	%r11,%r15,\savearea
 	lg	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+	aghi	%r15,-SP_SIZE		# make room for registers & psw
+	lg	%r11,__LC_LAST_BREAK
 	.endm
 
-	.macro	SAVE_ALL_SYNC psworg,savearea
-	la	%r12,\psworg
+	.macro	SAVE_ALL_PGM psworg,savearea
+	stmg	%r11,%r15,\savearea
 	tm	\psworg+1,0x01		# test problem state bit
-	jz	2f			# skip stack setup save
-	lg	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
 #ifdef CONFIG_CHECK_STACK
-	j	3f
-2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
-	jz	stack_overflow
-3:
+	jnz	1f
+	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	jnz	2f
+	la	%r12,\psworg
+	j	stack_overflow
+#else
+	jz	2f
 #endif
-2:
+1:	lg	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+2:	aghi	%r15,-SP_SIZE		# make room for registers & psw
+	larl	%r13,system_call
+	lg	%r11,__LC_LAST_BREAK
 	.endm
 
 	.macro	SAVE_ALL_ASYNC psworg,savearea
+	stmg	%r11,%r15,\savearea
+	larl	%r13,system_call
+	lg	%r11,__LC_LAST_BREAK
 	la	%r12,\psworg
 	tm	\psworg+1,0x01		# test problem state bit
 	jnz	1f			# from user -> load kernel stack
@@ -151,27 +168,23 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
 0:	lg	%r14,__LC_ASYNC_STACK	# are we already on the async. stack ?
 	slgr	%r14,%r15
 	srag	%r14,%r14,STACK_SHIFT
-	jz	2f
-1:	lg	%r15,__LC_ASYNC_STACK	# load async stack
 #ifdef CONFIG_CHECK_STACK
-	j	3f
-2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
-	jz	stack_overflow
-3:
+	jnz	1f
+	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	jnz	2f
+	j	stack_overflow
+#else
+	jz	2f
 #endif
-2:
+1:	lg	%r15,__LC_ASYNC_STACK	# load async stack
+2:	aghi	%r15,-SP_SIZE		# make room for registers & psw
 	.endm
 
-	.macro	CREATE_STACK_FRAME psworg,savearea
-	aghi	%r15,-SP_SIZE		# make room for registers & psw
-	mvc	SP_PSW(16,%r15),0(%r12)	# move user PSW to stack
+	.macro	CREATE_STACK_FRAME savearea
+	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	stg	%r2,SP_ORIG_R2(%r15)	# store original content of gpr 2
-	icm	%r12,3,__LC_SVC_ILC
-	stmg	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
-	st	%r12,SP_SVCNR(%r15)
-	mvc	SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
-	la	%r12,0
-	stg	%r12,__SF_BACKCHAIN(%r15)
+	mvc	SP_R11(40,%r15),\savearea # move %r11-%r15 to stack
+	stmg	%r0,%r10,SP_R0(%r15)	# store gprs %r0-%r10 to kernel stack
 	.endm
 
 	.macro	RESTORE_ALL psworg,sync
@@ -187,6 +200,13 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
 	lpswe	\psworg			# back to caller
 	.endm
 
+	.macro	LAST_BREAK
+	srag	%r10,%r11,23
+	jz	0f
+	stg	%r11,__TI_last_break(%r12)
+0:
+	.endm
+
 /*
  * Scheduler resume function, called by switch_to
  *  gpr2 = (task_struct *) prev
@@ -232,143 +252,129 @@ __critical_start:
 system_call:
 	stpt	__LC_SYNC_ENTER_TIMER
 sysc_saveall:
-	SAVE_ALL_BASE __LC_SAVE_AREA
 	SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	llgh	%r7,__LC_SVC_INT_CODE	# get svc number from lowcore
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	stg	%r7,SP_ARGS(%r15)
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 sysc_vtime:
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 sysc_stime:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 sysc_update:
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
+	LAST_BREAK
 sysc_do_svc:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	ltgr	%r7,%r7		# test for svc 0
+	llgh	%r7,SP_SVCNR(%r15)
+	slag	%r7,%r7,2	# shift and test for svc 0
 	jnz	sysc_nr_ok
 	# svc 0: system call number in %r1
-	cl	%r1,BASED(.Lnr_syscalls)
+	llgfr	%r1,%r1		# clear high word in r1
+	cghi	%r1,NR_syscalls
 	jnl	sysc_nr_ok
-	lgfr	%r7,%r1 	# clear high word in r1
+	sth	%r1,SP_SVCNR(%r15)
+	slag	%r7,%r1,2	# shift and test for svc 0
 sysc_nr_ok:
-	mvc	SP_ARGS(8,%r15),SP_R7(%r15)
-sysc_do_restart:
-	sth	%r7,SP_SVCNR(%r15)
-	sllg	%r7,%r7,2	# svc number * 4
 	larl	%r10,sys_call_table
 #ifdef CONFIG_COMPAT
-	tm	__TI_flags+5(%r9),(_TIF_31BIT>>16)  # running in 31 bit mode ?
+	tm	__TI_flags+5(%r12),(_TIF_31BIT>>16)  # running in 31 bit mode ?
 	jno	sysc_noemu
 	larl	%r10,sys_call_table_emu  # use 31 bit emulation system calls
 sysc_noemu:
 #endif
-	tm	__TI_flags+6(%r9),_TIF_SYSCALL
+	tm	__TI_flags+6(%r12),_TIF_SYSCALL
 	lgf	%r8,0(%r7,%r10) # load address of system call routine
 	jnz	sysc_tracesys
 	basr	%r14,%r8	# call sys_xxxx
 	stg	%r2,SP_R2(%r15) # store return value (change R2 on stack)
 
 sysc_return:
-	tm	__TI_flags+7(%r9),_TIF_WORK_SVC
+	LOCKDEP_SYS_EXIT
+sysc_tif:
+	tm	__TI_flags+7(%r12),_TIF_WORK_SVC
 	jnz	sysc_work	# there is work to do (signals etc.)
 sysc_restore:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	larl	%r1,sysc_restore_trace_psw
-	lpswe	0(%r1)
-sysc_restore_trace:
-	TRACE_IRQS_CHECK
-	LOCKDEP_SYS_EXIT
-#endif
-sysc_leave:
 	RESTORE_ALL __LC_RETURN_PSW,1
 sysc_done:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	.section .data,"aw",@progbits
-	.align	8
-	.globl sysc_restore_trace_psw
-sysc_restore_trace_psw:
-	.quad	0, sysc_restore_trace
-	.previous
-#endif
-
-#
-# recheck if there is more work to do
 #
-sysc_work_loop:
-	tm	__TI_flags+7(%r9),_TIF_WORK_SVC
-	jz	sysc_restore	  # there is no work to do
-#
-# One of the work bits is on. Find out which one.
+# There is work to do, but first we need to check if we return to userspace.
 #
 sysc_work:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
 	jno	sysc_restore
-	tm	__TI_flags+7(%r9),_TIF_MCCK_PENDING
+
+#
+# One of the work bits is on. Find out which one.
+#
+sysc_work_tif:
+	tm	__TI_flags+7(%r12),_TIF_MCCK_PENDING
 	jo	sysc_mcck_pending
-	tm	__TI_flags+7(%r9),_TIF_NEED_RESCHED
+	tm	__TI_flags+7(%r12),_TIF_NEED_RESCHED
 	jo	sysc_reschedule
-	tm	__TI_flags+7(%r9),_TIF_SIGPENDING
-	jnz	sysc_sigpending
-	tm	__TI_flags+7(%r9),_TIF_NOTIFY_RESUME
-	jnz	sysc_notify_resume
-	tm	__TI_flags+7(%r9),_TIF_RESTART_SVC
+	tm	__TI_flags+7(%r12),_TIF_SIGPENDING
+	jo	sysc_sigpending
+	tm	__TI_flags+7(%r12),_TIF_NOTIFY_RESUME
+	jo	sysc_notify_resume
+	tm	__TI_flags+7(%r12),_TIF_RESTART_SVC
 	jo	sysc_restart
-	tm	__TI_flags+7(%r9),_TIF_SINGLE_STEP
+	tm	__TI_flags+7(%r12),_TIF_SINGLE_STEP
 	jo	sysc_singlestep
-	j	sysc_restore
-sysc_work_done:
+	j	sysc_return		# beware of critical section cleanup
 
 #
 # _TIF_NEED_RESCHED is set, call schedule
 #
 sysc_reschedule:
-	larl	%r14,sysc_work_loop
-	jg	schedule	# return point is sysc_return
+	larl	%r14,sysc_return
+	jg	schedule		# return point is sysc_return
 
 #
 # _TIF_MCCK_PENDING is set, call handler
 #
 sysc_mcck_pending:
-	larl	%r14,sysc_work_loop
+	larl	%r14,sysc_return
 	jg	s390_handle_mcck	# TIF bit will be cleared by handler
 
 #
 # _TIF_SIGPENDING is set, call do_signal
 #
 sysc_sigpending:
-	ni	__TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+	ni	__TI_flags+7(%r12),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	brasl	%r14,do_signal		# call do_signal
-	tm	__TI_flags+7(%r9),_TIF_RESTART_SVC
+	tm	__TI_flags+7(%r12),_TIF_RESTART_SVC
 	jo	sysc_restart
-	tm	__TI_flags+7(%r9),_TIF_SINGLE_STEP
+	tm	__TI_flags+7(%r12),_TIF_SINGLE_STEP
 	jo	sysc_singlestep
-	j	sysc_work_loop
+	j	sysc_return
 
 #
 # _TIF_NOTIFY_RESUME is set, call do_notify_resume
 #
 sysc_notify_resume:
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	larl	%r14,sysc_work_loop
+	larl	%r14,sysc_return
 	jg	do_notify_resume	# call do_notify_resume
 
 #
 # _TIF_RESTART_SVC is set, set up registers and restart svc
 #
 sysc_restart:
-	ni	__TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
+	ni	__TI_flags+7(%r12),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
 	lg	%r7,SP_R2(%r15)		# load new svc number
 	mvc	SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
 	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
-	j	sysc_do_restart 	# restart svc
+	sth	%r7,SP_SVCNR(%r15)
+	slag	%r7,%r7,2
+	j	sysc_nr_ok		# restart svc
 
 #
 # _TIF_SINGLE_STEP is set, call do_single_step
 #
 sysc_singlestep:
-	ni	__TI_flags+7(%r9),255-_TIF_SINGLE_STEP	# clear TIF_SINGLE_STEP
+	ni	__TI_flags+7(%r12),255-_TIF_SINGLE_STEP	# clear TIF_SINGLE_STEP
 	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)		# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	larl	%r14,sysc_return	# load adr. of system return
@@ -381,8 +387,8 @@ sysc_singlestep:
 sysc_tracesys:
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	la	%r3,0
-	srl	%r7,2
-	stg	%r7,SP_R2(%r15)
+	llgh	%r0,SP_SVCNR(%r15)
+	stg	%r0,SP_R2(%r15)
 	brasl	%r14,do_syscall_trace_enter
 	lghi	%r0,NR_syscalls
 	clgr	%r0,%r2
@@ -395,7 +401,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	stg	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+6(%r9),_TIF_SYSCALL
+	tm	__TI_flags+6(%r12),_TIF_SYSCALL
 	jz	sysc_return
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	larl	%r14,sysc_return	# return point is sysc_return
@@ -407,7 +413,7 @@ sysc_tracenogo:
 	.globl	ret_from_fork
 ret_from_fork:
 	lg	%r13,__LC_SVC_NEW_PSW+8
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# forking a kernel thread ?
 	jo	0f
 	stg	%r15,SP_R15(%r15)	# store stack pointer for new kthread
@@ -437,12 +443,14 @@ kernel_execve:
 	br	%r14
 	# execve succeeded.
 0:	stnsm	__SF_EMPTY(%r15),0xfc	# disable interrupts
+#	TRACE_IRQS_OFF
 	lg	%r15,__LC_KERNEL_STACK	# load ksp
 	aghi	%r15,-SP_SIZE		# make room for registers & psw
 	lg	%r13,__LC_SVC_NEW_PSW+8
-	lg	%r9,__LC_THREAD_INFO
 	mvc	SP_PTREGS(__PT_SIZE,%r15),0(%r12)	# copy pt_regs
+	lg	%r12,__LC_THREAD_INFO
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
+#	TRACE_IRQS_ON
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	brasl	%r14,execve_tail
 	j	sysc_return
@@ -467,20 +475,23 @@ pgm_check_handler:
  * for LPSW?).
  */
 	stpt	__LC_SYNC_ENTER_TIMER
-	SAVE_ALL_BASE __LC_SAVE_AREA
 	tm	__LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
 	jnz	pgm_per 		 # got per exception -> special case
-	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	xc	SP_ILC(4,%r15),SP_ILC(%r15)
+	mvc	SP_PSW(16,%r15),__LC_PGM_OLD_PSW
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	pgm_no_vtime
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
+	LAST_BREAK
 pgm_no_vtime:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	mvc	SP_ARGS(8,%r15),__LC_LAST_BREAK
-	TRACE_IRQS_OFF
+	HANDLE_SIE_INTERCEPT
+	TRACE_IRQS_CHECK_OFF
+	stg	%r11,SP_ARGS(%r15)
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lghi	%r8,0x7f
 	ngr	%r8,%r3
@@ -489,8 +500,10 @@ pgm_do_call:
 	larl	%r1,pgm_check_table
 	lg	%r1,0(%r8,%r1)		# load address of handler routine
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	larl	%r14,sysc_return
-	br	%r1			# branch to interrupt-handler
+	basr	%r14,%r1		# branch to interrupt-handler
+pgm_exit:
+	TRACE_IRQS_CHECK_ON
+	j	sysc_return
 
 #
 # handle per exception
@@ -502,55 +515,68 @@ pgm_per:
 	clc	__LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW
 	je	pgm_svcper
 # no interesting special case, ignore PER event
-	lmg	%r12,%r15,__LC_SAVE_AREA
 	lpswe	__LC_PGM_OLD_PSW
 
 #
 # Normal per exception
 #
 pgm_per_std:
-	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(16,%r15),__LC_PGM_OLD_PSW
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	pgm_no_vtime2
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
+	LAST_BREAK
 pgm_no_vtime2:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	TRACE_IRQS_OFF
-	lg	%r1,__TI_task(%r9)
+	HANDLE_SIE_INTERCEPT
+	TRACE_IRQS_CHECK_OFF
+	lg	%r1,__TI_task(%r12)
 	tm	SP_PSW+1(%r15),0x01	# kernel per event ?
 	jz	kernel_per
 	mvc	__THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
 	mvc	__THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
 	mvc	__THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
-	oi	__TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	oi	__TI_flags+7(%r12),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lghi	%r8,0x7f
 	ngr	%r8,%r3			# clear per-event-bit and ilc
-	je	sysc_return
-	j	pgm_do_call
+	je	pgm_exit2
+	sll	%r8,3
+	larl	%r1,pgm_check_table
+	lg	%r1,0(%r8,%r1)		# load address of handler routine
+	la	%r2,SP_PTREGS(%r15)	# address of register-save area
+	basr	%r14,%r1		# branch to interrupt-handler
+pgm_exit2:
+	TRACE_IRQS_ON
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	j	sysc_return
 
 #
 # it was a single stepped SVC that is causing all the trouble
 #
 pgm_svcper:
-	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-	llgh	%r7,__LC_SVC_INT_CODE	# get svc number from lowcore
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	lg	%r8,__TI_task(%r9)
+	LAST_BREAK
+	TRACE_IRQS_OFF
+	lg	%r8,__TI_task(%r12)
 	mvc	__THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
 	mvc	__THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS
 	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
-	oi	__TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	oi	__TI_flags+7(%r12),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
 	TRACE_IRQS_ON
-	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	j	sysc_do_svc
 
 #
@@ -559,8 +585,8 @@ pgm_svcper:
 kernel_per:
 	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)	# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	larl	%r14,sysc_restore	# load adr. of system ret, no work
-	jg	do_single_step		# branch to do_single_step
+	brasl	%r14,do_single_step
+	j	pgm_exit
 
 /*
  * IO interrupt handler routine
@@ -569,162 +595,133 @@ kernel_per:
 io_int_handler:
 	stck	__LC_INT_CLOCK
 	stpt	__LC_ASYNC_ENTER_TIMER
-	SAVE_ALL_BASE __LC_SAVE_AREA+32
-	SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
-	CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
+	SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+40
+	CREATE_STACK_FRAME __LC_SAVE_AREA+40
+	mvc	SP_PSW(16,%r15),0(%r12)	# move user PSW to stack
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	io_no_vtime
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	LAST_BREAK
 io_no_vtime:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
+	HANDLE_SIE_INTERCEPT
 	TRACE_IRQS_OFF
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	brasl	%r14,do_IRQ		# call standard irq handler
 io_return:
-	tm	__TI_flags+7(%r9),_TIF_WORK_INT
+	LOCKDEP_SYS_EXIT
+	TRACE_IRQS_ON
+io_tif:
+	tm	__TI_flags+7(%r12),_TIF_WORK_INT
 	jnz	io_work 		# there is work to do (signals etc.)
 io_restore:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	larl	%r1,io_restore_trace_psw
-	lpswe	0(%r1)
-io_restore_trace:
-	TRACE_IRQS_CHECK
-	LOCKDEP_SYS_EXIT
-#endif
-io_leave:
 	RESTORE_ALL __LC_RETURN_PSW,0
 io_done:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	.section .data,"aw",@progbits
-	.align	8
-	.globl io_restore_trace_psw
-io_restore_trace_psw:
-	.quad	0, io_restore_trace
-	.previous
-#endif
-
 #
-# There is work todo, we need to check if we return to userspace, then
-# check, if we are in SIE, if yes leave it
+# There is work todo, find out in which context we have been interrupted:
+# 1) if we return to user space we can do all _TIF_WORK_INT work
+# 2) if we return to kernel code and kvm is enabled check if we need to
+#    modify the psw to leave SIE
+# 3) if we return to kernel code and preemptive scheduling is enabled check
+#    the preemption counter and if it is zero call preempt_schedule_irq
+# Before any work can be done, a switch to the kernel stack is required.
 #
 io_work:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-#ifndef CONFIG_PREEMPT
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-	jnz	io_work_user		# yes -> no need to check for SIE
-	la	%r1, BASED(sie_opcode)	# we return to kernel here
-	lg	%r2, SP_PSW+8(%r15)
-	clc	0(2,%r1), 0(%r2)	# is current instruction = SIE?
-	jne	io_restore		# no-> return to kernel
-	lg	%r1, SP_PSW+8(%r15)	# yes-> add 4 bytes to leave SIE
-	aghi	%r1, 4
-	stg	%r1, SP_PSW+8(%r15)
-	j	io_restore		# return to kernel
-#else
-	jno	io_restore		# no-> skip resched & signal
-#endif
-#else
-	jnz	io_work_user		# yes -> do resched & signal
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-	la	%r1, BASED(sie_opcode)
-	lg	%r2, SP_PSW+8(%r15)
-	clc	0(2,%r1), 0(%r2)	# is current instruction = SIE?
-	jne	0f			# no -> leave PSW alone
-	lg	%r1, SP_PSW+8(%r15)	# yes-> add 4 bytes to leave SIE
-	aghi	%r1, 4
-	stg	%r1, SP_PSW+8(%r15)
-0:
-#endif
+	jo	io_work_user		# yes -> do resched & signal
+#ifdef CONFIG_PREEMPT
 	# check for preemptive scheduling
-	icm	%r0,15,__TI_precount(%r9)
+	icm	%r0,15,__TI_precount(%r12)
 	jnz	io_restore		# preemption is disabled
+	tm	__TI_flags+7(%r12),_TIF_NEED_RESCHED
+	jno	io_restore
 	# switch to kernel stack
 	lg	%r1,SP_R15(%r15)
 	aghi	%r1,-SP_SIZE
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
 	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lgr	%r15,%r1
-io_resume_loop:
-	tm	__TI_flags+7(%r9),_TIF_NEED_RESCHED
-	jno	io_restore
-	larl	%r14,io_resume_loop
-	jg	preempt_schedule_irq
+	# TRACE_IRQS_ON already done at io_return, call
+	# TRACE_IRQS_OFF to keep things symmetrical
+	TRACE_IRQS_OFF
+	brasl	%r14,preempt_schedule_irq
+	j	io_return
+#else
+	j	io_restore
 #endif
 
+#
+# Need to do work before returning to userspace, switch to kernel stack
+#
 io_work_user:
 	lg	%r1,__LC_KERNEL_STACK
 	aghi	%r1,-SP_SIZE
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
 	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lgr	%r15,%r1
+
 #
 # One of the work bits is on. Find out which one.
-# Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGPENDING, _TIF_NEED_RESCHED
+# Checked are: _TIF_SIGPENDING, _TIF_NOTIFY_RESUME, _TIF_NEED_RESCHED
 #	       and _TIF_MCCK_PENDING
 #
-io_work_loop:
-	tm	__TI_flags+7(%r9),_TIF_MCCK_PENDING
+io_work_tif:
+	tm	__TI_flags+7(%r12),_TIF_MCCK_PENDING
 	jo	io_mcck_pending
-	tm	__TI_flags+7(%r9),_TIF_NEED_RESCHED
+	tm	__TI_flags+7(%r12),_TIF_NEED_RESCHED
 	jo	io_reschedule
-	tm	__TI_flags+7(%r9),_TIF_SIGPENDING
-	jnz	io_sigpending
-	tm	__TI_flags+7(%r9),_TIF_NOTIFY_RESUME
-	jnz	io_notify_resume
-	j	io_restore
-io_work_done:
-
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-sie_opcode:
-	.long 0xb2140000
-#endif
+	tm	__TI_flags+7(%r12),_TIF_SIGPENDING
+	jo	io_sigpending
+	tm	__TI_flags+7(%r12),_TIF_NOTIFY_RESUME
+	jo	io_notify_resume
+	j	io_return		# beware of critical section cleanup
 
 #
 # _TIF_MCCK_PENDING is set, call handler
 #
 io_mcck_pending:
+	# TRACE_IRQS_ON already done at io_return
 	brasl	%r14,s390_handle_mcck	# TIF bit will be cleared by handler
-	j	io_work_loop
+	TRACE_IRQS_OFF
+	j	io_return
 
 #
 # _TIF_NEED_RESCHED is set, call schedule
 #
 io_reschedule:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	brasl	%r14,schedule		# call scheduler
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	tm	__TI_flags+7(%r9),_TIF_WORK_INT
-	jz	io_restore		# there is no work to do
-	j	io_work_loop
+	j	io_return
 
 #
 # _TIF_SIGPENDING or is set, call do_signal
 #
 io_sigpending:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	brasl	%r14,do_signal		# call do_signal
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	j	io_work_loop
+	j	io_return
 
 #
 # _TIF_NOTIFY_RESUME or is set, call do_notify_resume
 #
 io_notify_resume:
-	TRACE_IRQS_ON
+	# TRACE_IRQS_ON already done at io_return
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	brasl	%r14,do_notify_resume	# call do_notify_resume
 	stnsm	__SF_EMPTY(%r15),0xfc	# disable I/O and ext. interrupts
 	TRACE_IRQS_OFF
-	j	io_work_loop
+	j	io_return
 
 /*
  * External interrupt handler routine
@@ -733,16 +730,18 @@ io_notify_resume:
 ext_int_handler:
 	stck	__LC_INT_CLOCK
 	stpt	__LC_ASYNC_ENTER_TIMER
-	SAVE_ALL_BASE __LC_SAVE_AREA+32
-	SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
-	CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
+	SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+40
+	CREATE_STACK_FRAME __LC_SAVE_AREA+40
+	mvc	SP_PSW(16,%r15),0(%r12)	# move user PSW to stack
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	ext_no_vtime
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	LAST_BREAK
 ext_no_vtime:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
+	HANDLE_SIE_INTERCEPT
 	TRACE_IRQS_OFF
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	llgh	%r3,__LC_EXT_INT_CODE	# get interruption code
@@ -756,17 +755,18 @@ __critical_end:
  */
 	.globl mcck_int_handler
 mcck_int_handler:
-	stck	__LC_INT_CLOCK
+	stck	__LC_MCCK_CLOCK
 	la	%r1,4095		# revalidate r1
 	spt	__LC_CPU_TIMER_SAVE_AREA-4095(%r1)	# revalidate cpu timer
 	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs
-	SAVE_ALL_BASE __LC_SAVE_AREA+64
+	stmg	%r11,%r15,__LC_SAVE_AREA+80
+	larl	%r13,system_call
+	lg	%r11,__LC_LAST_BREAK
 	la	%r12,__LC_MCK_OLD_PSW
 	tm	__LC_MCCK_CODE,0x80	# system damage?
 	jo	mcck_int_main		# yes -> rest of mcck code invalid
 	la	%r14,4095
-	mvc	__LC_SAVE_AREA+104(8),__LC_ASYNC_ENTER_TIMER
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r14)
+	mvc	__LC_MCCK_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r14)
 	tm	__LC_MCCK_CODE+5,0x02	# stored cpu timer value valid?
 	jo	1f
 	la	%r14,__LC_SYNC_ENTER_TIMER
@@ -780,7 +780,7 @@ mcck_int_handler:
 	jl	0f
 	la	%r14,__LC_LAST_UPDATE_TIMER
 0:	spt	0(%r14)
-	mvc	__LC_ASYNC_ENTER_TIMER(8),0(%r14)
+	mvc	__LC_MCCK_ENTER_TIMER(8),0(%r14)
 1:	tm	__LC_MCCK_CODE+2,0x09	# mwp + ia of old psw valid?
 	jno	mcck_int_main		# no -> skip cleanup critical
 	tm	__LC_MCK_OLD_PSW+1,0x01 # test problem state bit
@@ -796,16 +796,19 @@ mcck_int_main:
 	srag	%r14,%r14,PAGE_SHIFT
 	jz	0f
 	lg	%r15,__LC_PANIC_STACK	# load panic stack
-0:	CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64
+0:	aghi	%r15,-SP_SIZE		# make room for registers & psw
+	CREATE_STACK_FRAME __LC_SAVE_AREA+80
+	mvc	SP_PSW(16,%r15),0(%r12)
+	lg	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	__LC_MCCK_CODE+2,0x08	# mwp of old psw valid?
 	jno	mcck_no_vtime		# no -> no timer update
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	jz	mcck_no_vtime
-	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
+	UPDATE_VTIME __LC_EXIT_TIMER,__LC_MCCK_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
-	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_MCCK_ENTER_TIMER
+	LAST_BREAK
 mcck_no_vtime:
-	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	brasl	%r14,s390_do_machine_check
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
@@ -816,8 +819,9 @@ mcck_no_vtime:
 	xc	__SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lgr	%r15,%r1
 	stosm	__SF_EMPTY(%r15),0x04	# turn dat on
-	tm	__TI_flags+7(%r9),_TIF_MCCK_PENDING
+	tm	__TI_flags+7(%r12),_TIF_MCCK_PENDING
 	jno	mcck_return
+	HANDLE_SIE_INTERCEPT
 	TRACE_IRQS_OFF
 	brasl	%r14,s390_handle_mcck
 	TRACE_IRQS_ON
@@ -825,11 +829,11 @@ mcck_return:
 	mvc	__LC_RETURN_MCCK_PSW(16),SP_PSW(%r15) # move return PSW
 	ni	__LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit
 	lmg	%r0,%r15,SP_R0(%r15)	# load gprs 0-15
-	mvc	__LC_ASYNC_ENTER_TIMER(8),__LC_SAVE_AREA+104
 	tm	__LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
 	jno	0f
 	stpt	__LC_EXIT_TIMER
 0:	lpswe	__LC_RETURN_MCCK_PSW	# back to caller
+mcck_done:
 
 /*
  * Restart interruption handler, kick starter for additional CPUs
@@ -885,14 +889,14 @@ stack_overflow:
 	lg	%r15,__LC_PANIC_STACK	# change to panic stack
 	aghi	%r15,-SP_SIZE
 	mvc	SP_PSW(16,%r15),0(%r12)	# move user PSW to stack
-	stmg	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
+	stmg	%r0,%r10,SP_R0(%r15)	# store gprs %r0-%r10 to kernel stack
 	la	%r1,__LC_SAVE_AREA
 	chi	%r12,__LC_SVC_OLD_PSW
 	je	0f
 	chi	%r12,__LC_PGM_OLD_PSW
 	je	0f
-	la	%r1,__LC_SAVE_AREA+32
-0:	mvc	SP_R12(32,%r15),0(%r1)	# move %r12-%r15 to stack
+	la	%r1,__LC_SAVE_AREA+40
+0:	mvc	SP_R11(40,%r15),0(%r1)	# move %r11-%r15 to stack
 	mvc	SP_ARGS(8,%r15),__LC_LAST_BREAK
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
@@ -901,18 +905,14 @@ stack_overflow:
 
 cleanup_table_system_call:
 	.quad	system_call, sysc_do_svc
-cleanup_table_sysc_return:
-	.quad	sysc_return, sysc_leave
-cleanup_table_sysc_leave:
-	.quad	sysc_leave, sysc_done
-cleanup_table_sysc_work_loop:
-	.quad	sysc_work_loop, sysc_work_done
-cleanup_table_io_return:
-	.quad	io_return, io_leave
-cleanup_table_io_leave:
-	.quad	io_leave, io_done
-cleanup_table_io_work_loop:
-	.quad	io_work_loop, io_work_done
+cleanup_table_sysc_tif:
+	.quad	sysc_tif, sysc_restore
+cleanup_table_sysc_restore:
+	.quad	sysc_restore, sysc_done
+cleanup_table_io_tif:
+	.quad	io_tif, io_restore
+cleanup_table_io_restore:
+	.quad	io_restore, io_done
 
 cleanup_critical:
 	clc	8(8,%r12),BASED(cleanup_table_system_call)
@@ -920,61 +920,54 @@ cleanup_critical:
 	clc	8(8,%r12),BASED(cleanup_table_system_call+8)
 	jl	cleanup_system_call
 0:
-	clc	8(8,%r12),BASED(cleanup_table_sysc_return)
+	clc	8(8,%r12),BASED(cleanup_table_sysc_tif)
 	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_sysc_return+8)
-	jl	cleanup_sysc_return
+	clc	8(8,%r12),BASED(cleanup_table_sysc_tif+8)
+	jl	cleanup_sysc_tif
 0:
-	clc	8(8,%r12),BASED(cleanup_table_sysc_leave)
+	clc	8(8,%r12),BASED(cleanup_table_sysc_restore)
 	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_sysc_leave+8)
-	jl	cleanup_sysc_leave
+	clc	8(8,%r12),BASED(cleanup_table_sysc_restore+8)
+	jl	cleanup_sysc_restore
 0:
-	clc	8(8,%r12),BASED(cleanup_table_sysc_work_loop)
+	clc	8(8,%r12),BASED(cleanup_table_io_tif)
 	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_sysc_work_loop+8)
-	jl	cleanup_sysc_return
+	clc	8(8,%r12),BASED(cleanup_table_io_tif+8)
+	jl	cleanup_io_tif
 0:
-	clc	8(8,%r12),BASED(cleanup_table_io_return)
+	clc	8(8,%r12),BASED(cleanup_table_io_restore)
 	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_io_return+8)
-	jl	cleanup_io_return
-0:
-	clc	8(8,%r12),BASED(cleanup_table_io_leave)
-	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_io_leave+8)
-	jl	cleanup_io_leave
-0:
-	clc	8(8,%r12),BASED(cleanup_table_io_work_loop)
-	jl	0f
-	clc	8(8,%r12),BASED(cleanup_table_io_work_loop+8)
-	jl	cleanup_io_return
+	clc	8(8,%r12),BASED(cleanup_table_io_restore+8)
+	jl	cleanup_io_restore
 0:
 	br	%r14
 
 cleanup_system_call:
 	mvc	__LC_RETURN_PSW(16),0(%r12)
-	cghi	%r12,__LC_MCK_OLD_PSW
-	je	0f
-	la	%r12,__LC_SAVE_AREA+32
-	j	1f
-0:	la	%r12,__LC_SAVE_AREA+64
-1:
 	clc	__LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+8)
 	jh	0f
+	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER
+	cghi	%r12,__LC_MCK_OLD_PSW
+	je	0f
 	mvc	__LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
+0:	cghi	%r12,__LC_MCK_OLD_PSW
+	la	%r12,__LC_SAVE_AREA+80
+	je	0f
+	la	%r12,__LC_SAVE_AREA+40
 0:	clc	__LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+16)
 	jhe	cleanup_vtime
 	clc	__LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn)
 	jh	0f
-	mvc	__LC_SAVE_AREA(32),0(%r12)
-0:	stg	%r13,8(%r12)
-	stg	%r12,__LC_SAVE_AREA+96	# argh
-	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	lg	%r12,__LC_SAVE_AREA+96	# argh
-	stg	%r15,24(%r12)
-	llgh	%r7,__LC_SVC_INT_CODE
+	mvc	__LC_SAVE_AREA(40),0(%r12)
+0:	lg	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+	aghi	%r15,-SP_SIZE		# make room for registers & psw
+	stg	%r15,32(%r12)
+	stg	%r11,0(%r12)
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(16,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	stg	%r7,SP_ARGS(%r15)
+	mvc	8(8,%r12),__LC_THREAD_INFO
 cleanup_vtime:
 	clc	__LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24)
 	jhe	cleanup_stime
@@ -985,7 +978,11 @@ cleanup_stime:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 cleanup_update:
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8)
+	srag	%r12,%r11,23
+	lg	%r12,__LC_THREAD_INFO
+	jz	0f
+	stg	%r11,__TI_last_break(%r12)
+0:	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8)
 	la	%r12,__LC_RETURN_PSW
 	br	%r14
 cleanup_system_call_insn:
@@ -995,55 +992,54 @@ cleanup_system_call_insn:
 	.quad	sysc_stime
 	.quad	sysc_update
 
-cleanup_sysc_return:
+cleanup_sysc_tif:
 	mvc	__LC_RETURN_PSW(8),0(%r12)
-	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_sysc_return)
+	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_sysc_tif)
 	la	%r12,__LC_RETURN_PSW
 	br	%r14
 
-cleanup_sysc_leave:
-	clc	8(8,%r12),BASED(cleanup_sysc_leave_insn)
-	je	3f
-	clc	8(8,%r12),BASED(cleanup_sysc_leave_insn+8)
+cleanup_sysc_restore:
+	clc	8(8,%r12),BASED(cleanup_sysc_restore_insn)
+	je	2f
+	clc	8(8,%r12),BASED(cleanup_sysc_restore_insn+8)
 	jhe	0f
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+	cghi	%r12,__LC_MCK_OLD_PSW
+	je	0f
 	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
 0:	mvc	__LC_RETURN_PSW(16),SP_PSW(%r15)
 	cghi	%r12,__LC_MCK_OLD_PSW
-	jne	1f
-	mvc	__LC_SAVE_AREA+64(32),SP_R12(%r15)
-	j	2f
-1:	mvc	__LC_SAVE_AREA+32(32),SP_R12(%r15)
-2:	lmg	%r0,%r11,SP_R0(%r15)
+	la	%r12,__LC_SAVE_AREA+80
+	je	1f
+	la	%r12,__LC_SAVE_AREA+40
+1:	mvc	0(40,%r12),SP_R11(%r15)
+	lmg	%r0,%r10,SP_R0(%r15)
 	lg	%r15,SP_R15(%r15)
-3:	la	%r12,__LC_RETURN_PSW
+2:	la	%r12,__LC_RETURN_PSW
 	br	%r14
-cleanup_sysc_leave_insn:
+cleanup_sysc_restore_insn:
 	.quad	sysc_done - 4
 	.quad	sysc_done - 16
 
-cleanup_io_return:
+cleanup_io_tif:
 	mvc	__LC_RETURN_PSW(8),0(%r12)
-	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_io_work_loop)
+	mvc	__LC_RETURN_PSW+8(8),BASED(cleanup_table_io_tif)
 	la	%r12,__LC_RETURN_PSW
 	br	%r14
 
-cleanup_io_leave:
-	clc	8(8,%r12),BASED(cleanup_io_leave_insn)
-	je	3f
-	clc	8(8,%r12),BASED(cleanup_io_leave_insn+8)
+cleanup_io_restore:
+	clc	8(8,%r12),BASED(cleanup_io_restore_insn)
+	je	1f
+	clc	8(8,%r12),BASED(cleanup_io_restore_insn+8)
 	jhe	0f
-	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
 0:	mvc	__LC_RETURN_PSW(16),SP_PSW(%r15)
-	cghi	%r12,__LC_MCK_OLD_PSW
-	jne	1f
-	mvc	__LC_SAVE_AREA+64(32),SP_R12(%r15)
-	j	2f
-1:	mvc	__LC_SAVE_AREA+32(32),SP_R12(%r15)
-2:	lmg	%r0,%r11,SP_R0(%r15)
+	mvc	__LC_SAVE_AREA+80(40),SP_R11(%r15)
+	lmg	%r0,%r10,SP_R0(%r15)
 	lg	%r15,SP_R15(%r15)
-3:	la	%r12,__LC_RETURN_PSW
+1:	la	%r12,__LC_RETURN_PSW
 	br	%r14
-cleanup_io_leave_insn:
+cleanup_io_restore_insn:
 	.quad	io_done - 4
 	.quad	io_done - 16
 
@@ -1051,13 +1047,6 @@ cleanup_io_leave_insn:
  * Integer constants
  */
 		.align	4
-.Lconst:
-.Lnr_syscalls:	.long	NR_syscalls
-.L0x0130:	.short	0x130
-.L0x0140:	.short	0x140
-.L0x0150:	.short	0x150
-.L0x0160:	.short	0x160
-.L0x0170:	.short	0x170
 .Lcritical_start:
 		.quad	__critical_start
 .Lcritical_end:
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 5a82bc6..6a83d05 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <trace/syscall.h>
-#include <asm/lowcore.h>
+#include <asm/asm-offsets.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
@@ -200,13 +200,3 @@ out:
 	return parent;
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-
-extern unsigned int sys_call_table[];
-
-unsigned long __init arch_syscall_addr(int nr)
-{
-	return (unsigned long)sys_call_table[nr];
-}
-#endif
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index c52b4f7..51838ad 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -1,5 +1,5 @@
 /*
- * Copyright IBM Corp. 1999,2009
+ * Copyright IBM Corp. 1999,2010
  *
  *    Author(s): Hartmut Penner <hp@de.ibm.com>
  *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -22,12 +22,9 @@
  */
 
 #include <linux/init.h>
-#include <asm/setup.h>
-#include <asm/lowcore.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
-#include <asm/cpu.h>
 
 #ifdef CONFIG_64BIT
 #define ARCH_OFFSET	4
@@ -288,19 +285,7 @@ iplstart:
 	bz	.Lagain1		# skip dateset trailer
 	la	%r5,0(%r4,%r2)
 	lr	%r3,%r2
-.Lidebc:
-	tm	0(%r5),0x80		# high order bit set ?
-	bo	.Ldocv			#  yes -> convert from EBCDIC
-	ahi	%r5,-1
-	bct	%r3,.Lidebc
-	b	.Lnocv
-.Ldocv:
-	l	%r3,.Lcvtab
-	tr	0(256,%r4),0(%r3)	# convert parameters to ascii
-	tr	256(256,%r4),0(%r3)
-	tr	512(256,%r4),0(%r3)
-	tr	768(122,%r4),0(%r3)
-.Lnocv: la	%r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
+	la	%r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
 	mvc	0(256,%r3),0(%r4)
 	mvc	256(256,%r3),256(%r4)
 	mvc	512(256,%r3),512(%r4)
@@ -343,8 +328,8 @@ iplstart:
 #
 # reset files in VM reader
 #
-	stidp	__LC_CPUID		# store cpuid
-	tm	__LC_CPUID,0xff 	# running VM ?
+	stidp	__LC_SAVE_AREA		# store cpuid
+	tm	__LC_SAVE_AREA,0xff	# running VM ?
 	bno	.Lnoreset
 	la	%r2,.Lreset
 	lhi	%r3,26
@@ -384,7 +369,6 @@ iplstart:
 .Linitrd:.long _end + 0x400000		# default address of initrd
 .Lparm:	.long  PARMAREA
 .Lstartup: .long startup
-.Lcvtab:.long	_ebcasc 		# ebcdic to ascii table
 .Lreset:.byte	0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
 	.byte	0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
 	.byte	0xc8,0xd6,0xd3,0xc4	# "change rdr all keep nohold"
@@ -417,13 +401,10 @@ start:
 .sk8x8:
 	mvc	0(240,%r8),0(%r9)	# copy iplparms into buffer
 .gotr:
-	l	%r10,.tbl		# EBCDIC to ASCII table
-	tr	0(240,%r8),0(%r10)
 	slr	%r0,%r0
 	st	%r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
 	st	%r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
 	j	startup 		# continue with startup
-.tbl:	.long	_ebcasc			# translate table
 .cmd:	.long	COMMAND_LINE		# address of command line buffer
 .parm:	.long	PARMAREA
 .lowcase:
@@ -467,16 +448,15 @@ start:
 # or linload or SALIPL
 #
 	.org	0x10000
-startup:basr	%r13,0			# get base
+	.globl	startup
+startup:
+	basr	%r13,0			# get base
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
-	l	%r1,5f-.LPG0(%r13)
-	stck	0(%r1)
-	spt	6f-.LPG0(%r13)
-	mvc	__LC_LAST_UPDATE_CLOCK(8),0(%r1)
-	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
-	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
+	stck	__LC_LAST_UPDATE_CLOCK
+	spt	5f-.LPG0(%r13)
+	mvc	__LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
 	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
@@ -494,7 +474,6 @@ startup:basr	%r13,0			# get base
 	cl	%r0,2f+12-.LPG0(%r13)
 	je	3f
 1:	l	%r15,.Lstack-.LPG0(%r13)
-	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
 	ahi	%r15,-96
 	la	%r2,.Lals_string-.LPG0(%r13)
 	l	%r3,.Lsclp_print-.LPG0(%r13)
@@ -505,7 +484,7 @@ startup:basr	%r13,0			# get base
 .Lsclp_print:
 	.long	_sclp_print_early
 .Lstack:
-	.long	init_thread_union
+	.long	0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
 	.align 16
 2:	.long	0x000a0000,0x8badcccc
 #if defined(CONFIG_64BIT)
@@ -532,13 +511,25 @@ startup:basr	%r13,0			# get base
 3:
 #endif
 
+#ifdef CONFIG_64BIT
+	mvi	__LC_AR_MODE_ID,1	# set esame flag
+	slr	%r0,%r0 		# set cpuid to zero
+	lhi	%r1,2			# mode 2 = esame (dump)
+	sigp	%r1,%r0,0x12		# switch to esame mode
+	sam64				# switch to 64 bit mode
+	larl	%r13,4f
+	lmh	%r0,%r15,0(%r13)	# clear high-order half
+	jg	startup_continue
+4:	.fill	16,4,0x0
+#else
+	mvi	__LC_AR_MODE_ID,0	# set ESA flag (mode 0)
 	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
-	.align	4
+	.align	8
 4:	.long	startup_continue
-5:	.long	sched_clock_base_cc
+#endif
 	.align	8
-6:	.long	0x7fffffff,0xffffffff
+5:	.long	0x7fffffff,0xffffffff
 
 #
 # params at 10400 (setup.h)
@@ -552,8 +543,4 @@ startup:basr	%r13,0			# get base
 	.byte	"root=/dev/ram0 ro"
 	.byte	0
 
-#ifdef CONFIG_64BIT
-#include "head64.S"
-#else
-#include "head31.S"
-#endif
+	.org	0x11000
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 602b508..b8f8dc1 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -1,7 +1,7 @@
 /*
  * arch/s390/kernel/head31.S
  *
- * Copyright (C) IBM Corp. 2005,2006
+ * Copyright (C) IBM Corp. 2005,2010
  *
  *   Author(s):	Hartmut Penner <hp@de.ibm.com>
  *		Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -10,13 +10,19 @@
  *
  */
 
-	.org	0x11000
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
 
+__HEAD
+	.globl	startup_continue
 startup_continue:
 	basr	%r13,0			# get base
 .LPG1:
 
-	mvi	__LC_AR_MODE_ID,0	# set ESA flag (mode 0)
+	l	%r1,.Lbase_cc-.LPG1(%r13)
+	mvc	0(8,%r1),__LC_LAST_UPDATE_CLOCK
 	lctl	%c0,%c15,.Lctl-.LPG1(%r13) # load control registers
 	l	%r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
 					# move IPL device to lowcore
@@ -69,12 +75,14 @@ startup_continue:
 .Lduald:.rept	8
 	.long	0x80000000,0,0,0	# invalid access-list entries
 	.endr
+.Lbase_cc:
+	.long	sched_clock_base_cc
 
-	.org	0x12000
 	.globl	_ehead
 _ehead:
+
 #ifdef CONFIG_SHARED_KERNEL
-	.org	0x100000
+	.org	0x100000 - 0x11000	# head.o ends at 0x11000
 #endif
 
 #
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index d984a2a..cdef687 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -1,7 +1,7 @@
 /*
  * arch/s390/kernel/head64.S
  *
- * Copyright (C) IBM Corp. 1999,2006
+ * Copyright (C) IBM Corp. 1999,2010
  *
  *   Author(s):	Hartmut Penner <hp@de.ibm.com>
  *		Martin Schwidefsky <schwidefsky@de.ibm.com>
@@ -10,81 +10,17 @@
  *
  */
 
-	.org	0x11000
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
 
+__HEAD
+	.globl	startup_continue
 startup_continue:
-	basr	%r13,0			# get base
-.LPG1:	sll	%r13,1			# remove high order bit
-	srl	%r13,1
-
-#ifdef CONFIG_ZFCPDUMP
-
-	# check if we have been ipled using zfcp dump:
-
-	tm	0xb9,0x01		# test if subchannel is enabled
-	jno	.nodump			# subchannel disabled
-	l	%r1,0xb8
-	la	%r5,.Lipl_schib-.LPG1(%r13)
-	stsch	0(%r5)			# get schib of subchannel
-	jne	.nodump			# schib not available
-	tm	5(%r5),0x01		# devno valid?
-	jno	.nodump
-	tm	4(%r5),0x80		# qdio capable device?
-	jno	.nodump
-	l	%r2,20(%r0)		# address of ipl parameter block
-	lhi	%r3,0
-	ic	%r3,0x148(%r2)		# get opt field
-	chi	%r3,0x20		# load with dump?
-	jne	.nodump
-
-	# store all prefix registers in case of load with dump:
-
-	la	%r7,0			# base register for 0 page
-	la	%r8,0			# first cpu
-	l	%r11,.Lpref_arr_ptr-.LPG1(%r13)	# address of prefix array
-	ahi	%r11,4			# skip boot cpu
-	lr	%r12,%r11
-	ahi	%r12,(CONFIG_NR_CPUS*4)	# end of prefix array
-	stap	.Lcurrent_cpu+2-.LPG1(%r13)	# store current cpu addr
-1:
-	cl	%r8,.Lcurrent_cpu-.LPG1(%r13)	# is ipl cpu ?
-	je	4f				# if yes get next cpu
-2:
-	lr	%r9,%r7
-	sigp	%r9,%r8,0x9		# stop & store status of cpu
-	brc	8,3f			# accepted
-	brc	4,4f			# status stored: next cpu
-	brc	2,2b			# busy: 	 try again
-	brc	1,4f			# not op:	 next cpu
-3:
-	mvc	0(4,%r11),264(%r7)	# copy prefix register to prefix array
-	ahi	%r11,4			# next element in prefix array
-	clr	%r11,%r12
-	je	5f			# no more space in prefix array
-4:
-	ahi	%r8,1			# next cpu (r8 += 1)
-	chi	%r8,MAX_CPU_ADDRESS	# is last possible cpu ?
-	jle	1b			# jump if not last cpu
-5:
-	lhi	%r1,2			# mode 2 = esame (dump)
-	j	6f
-	.align 4
-.Lipl_schib:
-	.rept 13
-	.long 0
-	.endr
-.nodump:
-	lhi	%r1,1			# mode 1 = esame (normal ipl)
-6:
-#else
-	lhi	%r1,1			# mode 1 = esame (normal ipl)
-#endif /* CONFIG_ZFCPDUMP */
-	mvi	__LC_AR_MODE_ID,1	# set esame flag
-	slr	%r0,%r0 		# set cpuid to zero
-	sigp	%r1,%r0,0x12		# switch to esame mode
-	sam64				# switch to 64 bit mode
-	llgfr	%r13,%r13		# clear high-order half of base reg
-	lmh	%r0,%r15,.Lzero64-.LPG1(%r13)	# clear high-order half
+	larl	%r1,sched_clock_base_cc
+	mvc	0(8,%r1),__LC_LAST_UPDATE_CLOCK
+	larl	%r13,.LPG1		# get base
 	lctlg	%c0,%c15,.Lctl-.LPG1(%r13)	# load control registers
 	lg	%r12,.Lparmaddr-.LPG1(%r13)	# pointer to parameter area
 					# move IPL device to lowcore
@@ -108,6 +44,7 @@ startup_continue:
 	lpswe	.Lentry-.LPG1(13)	# jump to _stext in primary-space,
 					# virtual and never return ...
 	.align	16
+.LPG1:
 .Lentry:.quad	0x0000000180000000,_stext
 .Lctl:	.quad	0x04350002		# cr0: various things
 	.quad	0			# cr1: primary space segment table
@@ -129,13 +66,6 @@ startup_continue:
 .L4malign:.quad 0xffffffffffc00000
 .Lscan2g:.quad	0x80000000 + 0x20000 - 8	# 2GB + 128K - 8
 .Lnop:	.long	0x07000700
-.Lzero64:.fill	16,4,0x0
-#ifdef CONFIG_ZFCPDUMP
-.Lcurrent_cpu:
-	.long 0x0
-.Lpref_arr_ptr:
-	.long zfcpdump_prefix_array
-#endif /* CONFIG_ZFCPDUMP */
 .Lparmaddr:
 	.quad	PARMAREA
 	.align	64
@@ -146,11 +76,11 @@ startup_continue:
 	.long	0x80000000,0,0,0	# invalid access-list entries
 	.endr
 
-	.org	0x12000
 	.globl	_ehead
 _ehead:
+
 #ifdef CONFIG_SHARED_KERNEL
-	.org	0x100000
+	.org	0x100000 - 0x11000	# head.o ends at 0x11000
 #endif
 
 #
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 4d73296..a689070 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -15,6 +15,7 @@
 #include <linux/reboot.h>
 #include <linux/ctype.h>
 #include <linux/fs.h>
+#include <linux/gfp.h>
 #include <asm/ipl.h>
 #include <asm/smp.h>
 #include <asm/setup.h>
@@ -402,8 +403,9 @@ static ssize_t sys_ipl_device_show(struct kobject *kobj,
 static struct kobj_attribute sys_ipl_device_attr =
 	__ATTR(device, S_IRUGO, sys_ipl_device_show, NULL);
 
-static ssize_t ipl_parameter_read(struct kobject *kobj, struct bin_attribute *attr,
-				  char *buf, loff_t off, size_t count)
+static ssize_t ipl_parameter_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *attr, char *buf,
+				  loff_t off, size_t count)
 {
 	return memory_read_from_buffer(buf, count, &off, IPL_PARMBLOCK_START,
 					IPL_PARMBLOCK_SIZE);
@@ -418,8 +420,9 @@ static struct bin_attribute ipl_parameter_attr = {
 	.read = &ipl_parameter_read,
 };
 
-static ssize_t ipl_scp_data_read(struct kobject *kobj, struct bin_attribute *attr,
-				 char *buf, loff_t off, size_t count)
+static ssize_t ipl_scp_data_read(struct file *filp, struct kobject *kobj,
+				 struct bin_attribute *attr, char *buf,
+				 loff_t off, size_t count)
 {
 	unsigned int size = IPL_PARMBLOCK_START->ipl_info.fcp.scp_data_len;
 	void *scp_data = &IPL_PARMBLOCK_START->ipl_info.fcp.scp_data;
@@ -553,7 +556,7 @@ out:
 	return rc;
 }
 
-static void ipl_run(struct shutdown_trigger *trigger)
+static void __ipl_run(void *unused)
 {
 	diag308(DIAG308_IPL, NULL);
 	if (MACHINE_IS_VM)
@@ -562,6 +565,11 @@ static void ipl_run(struct shutdown_trigger *trigger)
 		reipl_ccw_dev(&ipl_info.data.ccw.dev_id);
 }
 
+static void ipl_run(struct shutdown_trigger *trigger)
+{
+	smp_switch_to_ipl_cpu(__ipl_run, NULL);
+}
+
 static int __init ipl_init(void)
 {
 	int rc;
@@ -688,7 +696,7 @@ static struct kobj_attribute sys_reipl_ccw_vmparm_attr =
 
 /* FCP reipl device attributes */
 
-static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
+static ssize_t reipl_fcp_scpdata_read(struct file *filp, struct kobject *kobj,
 				      struct bin_attribute *attr,
 				      char *buf, loff_t off, size_t count)
 {
@@ -698,7 +706,7 @@ static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
 	return memory_read_from_buffer(buf, count, &off, scp_data, size);
 }
 
-static ssize_t reipl_fcp_scpdata_write(struct kobject *kobj,
+static ssize_t reipl_fcp_scpdata_write(struct file *filp, struct kobject *kobj,
 				       struct bin_attribute *attr,
 				       char *buf, loff_t off, size_t count)
 {
@@ -1039,7 +1047,7 @@ static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
 		sprintf(dst + pos, " PARM %s", vmparm);
 }
 
-static void reipl_run(struct shutdown_trigger *trigger)
+static void __reipl_run(void *unused)
 {
 	struct ccw_dev_id devid;
 	static char buf[128];
@@ -1087,6 +1095,11 @@ static void reipl_run(struct shutdown_trigger *trigger)
 	disabled_wait((unsigned long) __builtin_return_address(0));
 }
 
+static void reipl_run(struct shutdown_trigger *trigger)
+{
+	smp_switch_to_ipl_cpu(__reipl_run, NULL);
+}
+
 static void reipl_block_ccw_init(struct ipl_parameter_block *ipb)
 {
 	ipb->hdr.len = IPL_PARM_BLK_CCW_LEN;
@@ -1369,20 +1382,18 @@ static struct kobj_attribute dump_type_attr =
 
 static struct kset *dump_kset;
 
-static void dump_run(struct shutdown_trigger *trigger)
+static void __dump_run(void *unused)
 {
 	struct ccw_dev_id devid;
 	static char buf[100];
 
 	switch (dump_method) {
 	case DUMP_METHOD_CCW_CIO:
-		smp_send_stop();
 		devid.devno = dump_block_ccw->ipl_info.ccw.devno;
 		devid.ssid  = 0;
 		reipl_ccw_dev(&devid);
 		break;
 	case DUMP_METHOD_CCW_VM:
-		smp_send_stop();
 		sprintf(buf, "STORE STATUS");
 		__cpcmd(buf, NULL, 0, NULL);
 		sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno);
@@ -1396,10 +1407,17 @@ static void dump_run(struct shutdown_trigger *trigger)
 		diag308(DIAG308_SET, dump_block_fcp);
 		diag308(DIAG308_DUMP, NULL);
 		break;
-	case DUMP_METHOD_NONE:
-		return;
+	default:
+		break;
 	}
-	printk(KERN_EMERG "Dump failed!\n");
+}
+
+static void dump_run(struct shutdown_trigger *trigger)
+{
+	if (dump_method == DUMP_METHOD_NONE)
+		return;
+	smp_send_stop();
+	smp_switch_to_ipl_cpu(__dump_run, NULL);
 }
 
 static int __init dump_ccw_init(void)
@@ -1577,7 +1595,7 @@ static void vmcmd_run(struct shutdown_trigger *trigger)
 static int vmcmd_init(void)
 {
 	if (!MACHINE_IS_VM)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	vmcmd_kset = kset_create_and_add("vmcmd", NULL, firmware_kobj);
 	if (!vmcmd_kset)
 		return -ENOMEM;
@@ -1595,7 +1613,7 @@ static void stop_run(struct shutdown_trigger *trigger)
 {
 	if (strcmp(trigger->name, ON_PANIC_STR) == 0)
 		disabled_wait((unsigned long) __builtin_return_address(0));
-	while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+	while (sigp(smp_processor_id(), sigp_stop) == sigp_busy)
 		cpu_relax();
 	for (;;);
 }
@@ -1902,7 +1920,6 @@ void __init ipl_update_parameters(void)
 void __init ipl_save_parameters(void)
 {
 	struct cio_iplinfo iplinfo;
-	unsigned int *ipl_ptr;
 	void *src, *dst;
 
 	if (cio_get_iplinfo(&iplinfo))
@@ -1913,11 +1930,10 @@ void __init ipl_save_parameters(void)
 	if (!iplinfo.is_qdio)
 		return;
 	ipl_flags |= IPL_PARMBLOCK_VALID;
-	ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR;
-	src = (void *)(unsigned long)*ipl_ptr;
+	src = (void *)(unsigned long)S390_lowcore.ipl_parmblock_ptr;
 	dst = (void *)IPL_PARMBLOCK_ORIGIN;
 	memmove(dst, src, PAGE_SIZE);
-	*ipl_ptr = IPL_PARMBLOCK_ORIGIN;
+	S390_lowcore.ipl_parmblock_ptr = IPL_PARMBLOCK_ORIGIN;
 }
 
 static LIST_HEAD(rcall);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 86783ef..2a3d2bf 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -29,6 +29,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -62,6 +63,8 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction)
 	case 0x0b:	/* bsm	 */
 	case 0x83:	/* diag  */
 	case 0x44:	/* ex	 */
+	case 0xac:	/* stnsm */
+	case 0xad:	/* stosm */
 		return -EINVAL;
 	}
 	switch (*(__u16 *) instruction) {
@@ -71,6 +74,7 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction)
 	case 0xb258:	/* bsg	 */
 	case 0xb218:	/* pc	 */
 	case 0xb228:	/* pt	 */
+	case 0xb98d:	/* epsw	 */
 		return -EINVAL;
 	}
 	return 0;
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 131d7ee..a922d51 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -54,11 +54,11 @@ void machine_shutdown(void)
 {
 }
 
-void machine_kexec(struct kimage *image)
+static void __machine_kexec(void *data)
 {
 	relocate_kernel_t data_mover;
+	struct kimage *image = data;
 
-	smp_send_stop();
 	pfault_fini();
 	s390_reset_system();
 
@@ -68,3 +68,9 @@ void machine_kexec(struct kimage *image)
 	(*data_mover)(&image->head, image->start);
 	for (;;);
 }
+
+void machine_kexec(struct kimage *image)
+{
+	smp_send_stop();
+	smp_switch_to_ipl_cpu(__machine_kexec, image);
+}
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 639380a..22cfd63 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -55,8 +55,10 @@ void *module_alloc(unsigned long size)
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
-	vfree(mod->arch.syminfo);
-	mod->arch.syminfo = NULL;
+	if (mod) {
+		vfree(mod->arch.syminfo);
+		mod->arch.syminfo = NULL;
+	}
 	vfree(module_region);
 }
 
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 015e27d..ac15139 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -255,7 +255,8 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 	int umode;
 
 	nmi_enter();
-	s390_idle_check();
+	s390_idle_check(regs, S390_lowcore.mcck_clock,
+			S390_lowcore.mcck_enter_timer);
 
 	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
 	mcck = &__get_cpu_var(cpu_mcck);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 00b6d1d..1039fde 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -16,9 +16,9 @@
 #include <linux/fs.h>
 #include <linux/smp.h>
 #include <linux/stddef.h>
+#include <linux/slab.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/user.h>
 #include <linux/interrupt.h>
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 0729f36..ecb2d02 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -18,24 +18,42 @@
 #include <asm/lowcore.h>
 #include <asm/param.h>
 
+static DEFINE_PER_CPU(struct cpuid, cpu_id);
+
+/*
+ * cpu_init - initializes state that is per-CPU.
+ */
+void __cpuinit cpu_init(void)
+{
+	struct cpuid *id = &per_cpu(cpu_id, smp_processor_id());
+
+	get_cpu_id(id);
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	BUG_ON(current->mm);
+	enter_lazy_tlb(&init_mm, current);
+}
+
+/*
+ * print_cpu_info - print basic information about a cpu
+ */
 void __cpuinit print_cpu_info(void)
 {
+	struct cpuid *id = &per_cpu(cpu_id, smp_processor_id());
+
 	pr_info("Processor %d started, address %d, identification %06X\n",
-		S390_lowcore.cpu_nr, S390_lowcore.cpu_addr,
-		S390_lowcore.cpu_id.ident);
+		S390_lowcore.cpu_nr, S390_lowcore.cpu_addr, id->ident);
 }
 
 /*
  * show_cpuinfo - Get information on one CPU for use by procfs.
  */
-
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	static const char *hwcap_str[10] = {
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
 		"edat", "etf3eh", "highgprs"
 	};
-	struct _lowcore *lc;
 	unsigned long n = (unsigned long) v - 1;
 	int i;
 
@@ -55,19 +73,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	if (cpu_online(n)) {
-#ifdef CONFIG_SMP
-		lc = (smp_processor_id() == n) ?
-			&S390_lowcore : lowcore_ptr[n];
-#else
-		lc = &S390_lowcore;
-#endif
+		struct cpuid *id = &per_cpu(cpu_id, n);
 		seq_printf(m, "processor %li: "
 			   "version = %02X,  "
 			   "identification = %06X,  "
 			   "machine = %04X\n",
-			   n, lc->cpu_id.version,
-			   lc->cpu_id.ident,
-			   lc->cpu_id.machine);
+			   n, id->version, id->ident, id->machine);
 	}
 	preempt_enable();
 	return 0;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 7cf4642..83339d3 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -57,6 +57,7 @@
 enum s390_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
+	REGSET_LAST_BREAK,
 	REGSET_GENERAL_EXTENDED,
 };
 
@@ -381,6 +382,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			copied += sizeof(unsigned long);
 		}
 		return 0;
+	case PTRACE_GET_LAST_BREAK:
+		put_user(task_thread_info(child)->last_break,
+			 (unsigned long __user *) data);
+		return 0;
 	default:
 		/* Removing high order bit from addr (only for 31 bit). */
 		addr &= PSW_ADDR_INSN;
@@ -633,6 +638,10 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			copied += sizeof(unsigned int);
 		}
 		return 0;
+	case PTRACE_GET_LAST_BREAK:
+		put_user(task_thread_info(child)->last_break,
+			 (unsigned int __user *) data);
+		return 0;
 	}
 	return compat_ptrace_request(child, request, addr, data);
 }
@@ -640,7 +649,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret;
+	long ret = 0;
 
 	/* Do the secure computing check first. */
 	secure_computing(regs->gprs[2]);
@@ -649,7 +658,6 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 	 * The sysc_tracesys code in entry.S stored the system
 	 * call number to gprs[2].
 	 */
-	ret = regs->gprs[2];
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
 	    (tracehook_report_syscall_entry(regs) ||
 	     regs->gprs[2] >= NR_syscalls)) {
@@ -671,7 +679,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 				    regs->gprs[2], regs->orig_gpr2,
 				    regs->gprs[3], regs->gprs[4],
 				    regs->gprs[5]);
-	return ret;
+	return ret ?: regs->gprs[2];
 }
 
 asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
@@ -798,6 +806,28 @@ static int s390_fpregs_set(struct task_struct *target,
 	return rc;
 }
 
+#ifdef CONFIG_64BIT
+
+static int s390_last_break_get(struct task_struct *target,
+			       const struct user_regset *regset,
+			       unsigned int pos, unsigned int count,
+			       void *kbuf, void __user *ubuf)
+{
+	if (count > 0) {
+		if (kbuf) {
+			unsigned long *k = kbuf;
+			*k = task_thread_info(target)->last_break;
+		} else {
+			unsigned long  __user *u = ubuf;
+			if (__put_user(task_thread_info(target)->last_break, u))
+				return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+#endif
+
 static const struct user_regset s390_regsets[] = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
@@ -815,6 +845,15 @@ static const struct user_regset s390_regsets[] = {
 		.get = s390_fpregs_get,
 		.set = s390_fpregs_set,
 	},
+#ifdef CONFIG_64BIT
+	[REGSET_LAST_BREAK] = {
+		.core_note_type = NT_S390_LAST_BREAK,
+		.n = 1,
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.get = s390_last_break_get,
+	},
+#endif
 };
 
 static const struct user_regset_view user_s390_view = {
@@ -949,6 +988,27 @@ static int s390_compat_regs_high_set(struct task_struct *target,
 	return rc;
 }
 
+static int s390_compat_last_break_get(struct task_struct *target,
+				      const struct user_regset *regset,
+				      unsigned int pos, unsigned int count,
+				      void *kbuf, void __user *ubuf)
+{
+	compat_ulong_t last_break;
+
+	if (count > 0) {
+		last_break = task_thread_info(target)->last_break;
+		if (kbuf) {
+			unsigned long *k = kbuf;
+			*k = last_break;
+		} else {
+			unsigned long  __user *u = ubuf;
+			if (__put_user(last_break, u))
+				return -EFAULT;
+		}
+	}
+	return 0;
+}
+
 static const struct user_regset s390_compat_regsets[] = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
@@ -966,6 +1026,13 @@ static const struct user_regset s390_compat_regsets[] = {
 		.get = s390_fpregs_get,
 		.set = s390_fpregs_set,
 	},
+	[REGSET_LAST_BREAK] = {
+		.core_note_type = NT_S390_LAST_BREAK,
+		.n = 1,
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.get = s390_compat_last_break_get,
+	},
 	[REGSET_GENERAL_EXTENDED] = {
 		.core_note_type = NT_S390_HIGH_GPRS,
 		.n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
@@ -992,3 +1059,61 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 	return &user_s390_view;
 }
+
+static const char *gpr_names[NUM_GPRS] = {
+	"r0", "r1",  "r2",  "r3",  "r4",  "r5",  "r6",  "r7",
+	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+};
+
+unsigned long regs_get_register(struct pt_regs *regs, unsigned int offset)
+{
+	if (offset >= NUM_GPRS)
+		return 0;
+	return regs->gprs[offset];
+}
+
+int regs_query_register_offset(const char *name)
+{
+	unsigned long offset;
+
+	if (!name || *name != 'r')
+		return -EINVAL;
+	if (strict_strtoul(name + 1, 10, &offset))
+		return -EINVAL;
+	if (offset >= NUM_GPRS)
+		return -EINVAL;
+	return offset;
+}
+
+const char *regs_query_register_name(unsigned int offset)
+{
+	if (offset >= NUM_GPRS)
+		return NULL;
+	return gpr_names[offset];
+}
+
+static int regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	unsigned long ksp = kernel_stack_pointer(regs);
+
+	return (addr & ~(THREAD_SIZE - 1)) == (ksp & ~(THREAD_SIZE - 1));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:pt_regs which contains kernel stack pointer.
+ * @n:stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specifined by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long addr;
+
+	addr = kernel_stack_pointer(regs) + n * sizeof(long);
+	if (!regs_within_kernel_stack(regs, addr))
+		return 0;
+	return *(unsigned long *)addr;
+}
diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S
index 2f481cc..cb899d9 100644
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -6,7 +6,7 @@
  *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com)
  */
 
-#include <asm/lowcore.h>
+#include <asm/asm-offsets.h>
 
 #
 # do_reipl_asm
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index 7741478..5e73dee 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -4,7 +4,7 @@
  *		 Denis Joseph Barrow,
  */
 
-#include <asm/lowcore.h>
+#include <asm/asm-offsets.h>
 
 #
 # do_reipl_asm
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index 59618bc..9ce641b 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -120,7 +120,8 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned short code)
 	struct pt_regs *old_regs;
 
 	old_regs = set_irq_regs(regs);
-	s390_idle_check();
+	s390_idle_check(regs, S390_lowcore.int_clock,
+			S390_lowcore.async_enter_timer);
 	irq_enter();
 	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
 		/* Serve timer interrupts first. */
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index e27ca63..2e82fdd 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -9,8 +9,10 @@
  */
 
 LC_EXT_NEW_PSW		= 0x58			# addr of ext int handler
+LC_EXT_NEW_PSW_64	= 0x1b0			# addr of ext int handler 64 bit
 LC_EXT_INT_PARAM	= 0x80			# addr of ext int parameter
 LC_EXT_INT_CODE		= 0x86			# addr of ext int code
+LC_AR_MODE_ID		= 0xa3
 
 #
 # Subroutine which waits synchronously until either an external interruption
@@ -30,8 +32,16 @@ _sclp_wait_int:
 .LbaseS1:
 	ahi	%r15,-96			# create stack frame
 	la	%r8,LC_EXT_NEW_PSW		# register int handler
-	mvc	.LoldpswS1-.LbaseS1(8,%r13),0(%r8)
-	mvc	0(8,%r8),.LextpswS1-.LbaseS1(%r13)
+	la	%r9,.LextpswS1-.LbaseS1(%r13)
+#ifdef CONFIG_64BIT
+	tm	LC_AR_MODE_ID,1
+	jno	.Lesa1
+	la	%r8,LC_EXT_NEW_PSW_64		# register int handler 64 bit
+	la	%r9,.LextpswS1_64-.LbaseS1(%r13)
+.Lesa1:
+#endif
+	mvc	.LoldpswS1-.LbaseS1(16,%r13),0(%r8)
+	mvc	0(16,%r8),0(%r9)
 	lhi	%r6,0x0200			# cr mask for ext int (cr0.54)
 	ltr	%r2,%r2
 	jz	.LsetctS1
@@ -64,15 +74,19 @@ _sclp_wait_int:
 .LtimeoutS1:
 	lctl	%c0,%c0,.LctlS1-.LbaseS1(%r13)	# restore interrupt setting
 	# restore old handler
-	mvc	0(8,%r8),.LoldpswS1-.LbaseS1(%r13)
+	mvc	0(16,%r8),.LoldpswS1-.LbaseS1(%r13)
 	lm	%r6,%r15,120(%r15)		# restore registers
 	br	%r14				# return to caller
 
 	.align	8
 .LoldpswS1:
-	.long	0, 0				# old ext int PSW
+	.long	0, 0, 0, 0			# old ext int PSW
 .LextpswS1:
 	.long	0x00080000, 0x80000000+.LwaitS1	# PSW to handle ext int
+#ifdef CONFIG_64BIT
+.LextpswS1_64:
+	.quad	0x0000000180000000, .LwaitS1	# PSW to handle ext int, 64 bit
+#endif
 .LwaitpswS1:
 	.long	0x010a0000, 0x00000000+.LloopS1	# PSW to wait for ext int
 .LtimeS1:
@@ -221,7 +235,7 @@ _sclp_print:
 	lh	%r9,0(%r8)			# update sccb length
 	ar	%r9,%r6
 	sth	%r9,0(%r8)
-	ar	%r7,%r6				# update current mto adress
+	ar	%r7,%r6				# update current mto address
 	ltr	%r0,%r0				# more characters?
 	jnz	.LinitmtoS4
 	l	%r2,.LwritedataS4-.LbaseS4(%r13)# write data
@@ -250,6 +264,13 @@ _sclp_print:
 _sclp_print_early:
 	stm	%r6,%r15,24(%r15)		# save registers
 	ahi	%r15,-96			# create stack frame
+#ifdef CONFIG_64BIT
+	tm	LC_AR_MODE_ID,1
+	jno	.Lesa2
+	ahi	%r15,-80
+	stmh	%r6,%r15,96(%r15)		# store upper register halves
+.Lesa2:
+#endif
 	lr	%r10,%r2			# save string pointer
 	lhi	%r2,0
 	bras	%r14,_sclp_setup		# enable console
@@ -262,6 +283,13 @@ _sclp_print_early:
 	lhi	%r2,1
 	bras	%r14,_sclp_setup		# disable console
 .LendS5:
+#ifdef CONFIG_64BIT
+	tm	LC_AR_MODE_ID,1
+	jno	.Lesa3
+	lmh	%r6,%r15,96(%r15)		# store upper register halves
+	ahi	%r15,80
+.Lesa3:
+#endif
 	lm	%r6,%r15,120(%r15)		# restore registers
 	br	%r14
 
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 8d8957b..c8e8e13 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -2,7 +2,7 @@
  *  arch/s390/kernel/setup.c
  *
  *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Copyright (C) IBM Corp. 1999,2010
  *    Author(s): Hartmut Penner (hp@de.ibm.com),
  *               Martin Schwidefsky (schwidefsky@de.ibm.com)
  *
@@ -25,7 +25,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
@@ -114,22 +113,6 @@ static struct resource data_resource = {
 };
 
 /*
- * cpu_init() initializes state that is per-CPU.
- */
-void __cpuinit cpu_init(void)
-{
-        /*
-         * Store processor id in lowcore (used e.g. in timer_interrupt)
-         */
-	get_cpu_id(&S390_lowcore.cpu_id);
-
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-	BUG_ON(current->mm);
-        enter_lazy_tlb(&init_mm, current);
-}
-
-/*
  * condev= and conmode= setup parameter.
  */
 
@@ -386,25 +369,18 @@ static void setup_addressing_mode(void)
 			pr_info("Address spaces switched, "
 				"mvcos not available\n");
 	}
-#ifdef CONFIG_TRACE_IRQFLAGS
-	sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
-	io_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
-#endif
 }
 
 static void __init
 setup_lowcore(void)
 {
 	struct _lowcore *lc;
-	int lc_pages;
 
 	/*
 	 * Setup lowcore for boot cpu
 	 */
-	lc_pages = sizeof(void *) == 8 ? 2 : 1;
-	lc = (struct _lowcore *)
-		__alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0);
-	memset(lc, 0, lc_pages * PAGE_SIZE);
+	BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
+	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
 	lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
 	lc->restart_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
@@ -436,11 +412,12 @@ setup_lowcore(void)
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE) {
 		lc->extended_save_area_addr = (__u32)
-			__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
+			__alloc_bootmem_low(PAGE_SIZE, PAGE_SIZE, 0);
 		/* enable extended save area */
 		__ctl_set_bit(14, 29);
 	}
 #else
+	lc->cmf_hpp = -1ULL;
 	lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
 #endif
 	lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
@@ -699,6 +676,7 @@ static void __init setup_hwcaps(void)
 	static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
 	unsigned long long facility_list_extended;
 	unsigned int facility_list;
+	struct cpuid cpu_id;
 	int i;
 
 	facility_list = stfl();
@@ -760,7 +738,8 @@ static void __init setup_hwcaps(void)
 	 */
 	elf_hwcap |= HWCAP_S390_HIGH_GPRS;
 
-	switch (S390_lowcore.cpu_id.machine) {
+	get_cpu_id(&cpu_id);
+	switch (cpu_id.machine) {
 	case 0x9672:
 #if !defined(CONFIG_64BIT)
 	default:	/* Use "g5" as default for 31 bit kernels. */
@@ -804,7 +783,7 @@ setup_arch(char **cmdline_p)
 	if (MACHINE_IS_VM)
 		pr_info("Linux is running as a z/VM "
 			"guest operating system in 31-bit mode\n");
-	else
+	else if (MACHINE_IS_LPAR)
 		pr_info("Linux is running natively in 31-bit mode\n");
 	if (MACHINE_HAS_IEEE)
 		pr_info("The hardware system has IEEE compatible "
@@ -818,7 +797,7 @@ setup_arch(char **cmdline_p)
 			"guest operating system in 64-bit mode\n");
 	else if (MACHINE_IS_KVM)
 		pr_info("Linux is running under KVM in 64-bit mode\n");
-	else
+	else if (MACHINE_IS_LPAR)
 		pr_info("Linux is running natively in 64-bit mode\n");
 #endif /* CONFIG_64BIT */
 
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6289945..ee7ac8b 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -313,6 +313,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	   To avoid breaking binary compatibility, they are passed as args. */
 	regs->gprs[4] = current->thread.trap_no;
 	regs->gprs[5] = current->thread.prot_addr;
+	regs->gprs[6] = task_thread_info(current)->last_break;
 
 	/* Place signal number on stack to allow backtrace from handler.  */
 	if (__put_user(regs->gprs[2], (int __user *) &frame->signo))
@@ -376,6 +377,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->gprs[2] = map_signal(sig);
 	regs->gprs[3] = (unsigned long) &frame->info;
 	regs->gprs[4] = (unsigned long) &frame->uc;
+	regs->gprs[5] = task_thread_info(current)->last_break;
 	return 0;
 
 give_sigsegv:
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 76a6fdd..541053e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -36,6 +36,8 @@
 #include <linux/cpu.h>
 #include <linux/timex.h>
 #include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <asm/asm-offsets.h>
 #include <asm/ipl.h>
 #include <asm/setup.h>
 #include <asm/sigp.h>
@@ -53,7 +55,7 @@
 #include "entry.h"
 
 /* logical cpu to cpu address */
-int __cpu_logical_map[NR_CPUS];
+unsigned short __cpu_logical_map[NR_CPUS];
 
 static struct task_struct *current_set[NR_CPUS];
 
@@ -72,13 +74,13 @@ static int cpu_management;
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
-static void smp_ext_bitcall(int, ec_bit_sig);
+static void smp_ext_bitcall(int, int);
 
-static int cpu_stopped(int cpu)
+static int raw_cpu_stopped(int cpu)
 {
-	__u32 status;
+	u32 status;
 
-	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	switch (raw_sigp_ps(&status, 0, cpu, sigp_sense)) {
 	case sigp_status_stored:
 		/* Check for stopped and check stop state */
 		if (status & 0x50)
@@ -90,6 +92,44 @@ static int cpu_stopped(int cpu)
 	return 0;
 }
 
+static inline int cpu_stopped(int cpu)
+{
+	return raw_cpu_stopped(cpu_logical_map(cpu));
+}
+
+void smp_switch_to_ipl_cpu(void (*func)(void *), void *data)
+{
+	struct _lowcore *lc, *current_lc;
+	struct stack_frame *sf;
+	struct pt_regs *regs;
+	unsigned long sp;
+
+	if (smp_processor_id() == 0)
+		func(data);
+	__load_psw_mask(PSW_BASE_BITS | PSW_DEFAULT_KEY);
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0, 28);
+	current_lc = lowcore_ptr[smp_processor_id()];
+	lc = lowcore_ptr[0];
+	if (!lc)
+		lc = current_lc;
+	lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+	lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) smp_restart_cpu;
+	if (!cpu_online(0))
+		smp_switch_to_cpu(func, data, 0, stap(), __cpu_logical_map[0]);
+	while (sigp(0, sigp_stop_and_store_status) == sigp_busy)
+		cpu_relax();
+	sp = lc->panic_stack;
+	sp -= sizeof(struct pt_regs);
+	regs = (struct pt_regs *) sp;
+	memcpy(&regs->gprs, &current_lc->gpregs_save_area, sizeof(regs->gprs));
+	regs->psw = lc->psw_save_area;
+	sp -= STACK_FRAME_OVERHEAD;
+	sf = (struct stack_frame *) sp;
+	sf->back_chain = regs->gprs[15];
+	smp_switch_to_cpu(func, data, sp, stap(), __cpu_logical_map[0]);
+}
+
 void smp_send_stop(void)
 {
 	int cpu, rc;
@@ -103,7 +143,7 @@ void smp_send_stop(void)
 		if (cpu == smp_processor_id())
 			continue;
 		do {
-			rc = signal_processor(cpu, sigp_stop);
+			rc = sigp(cpu, sigp_stop);
 		} while (rc == sigp_busy);
 
 		while (!cpu_stopped(cpu))
@@ -139,13 +179,13 @@ static void do_ext_call_interrupt(__u16 code)
  * Send an external call sigp to another cpu and return without waiting
  * for its completion.
  */
-static void smp_ext_bitcall(int cpu, ec_bit_sig sig)
+static void smp_ext_bitcall(int cpu, int sig)
 {
 	/*
 	 * Set signaling bit in lowcore of target cpu and kick it
 	 */
 	set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
-	while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
+	while (sigp(cpu, sigp_emergency_signal) == sigp_busy)
 		udelay(10);
 }
 
@@ -239,24 +279,8 @@ void smp_ctl_clear_bit(int cr, int bit)
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);
 
-/*
- * In early ipl state a temp. logically cpu number is needed, so the sigp
- * functions can be used to sense other cpus. Since NR_CPUS is >= 2 on
- * CONFIG_SMP and the ipl cpu is logical cpu 0, it must be 1.
- */
-#define CPU_INIT_NO	1
-
 #ifdef CONFIG_ZFCPDUMP
 
-/*
- * zfcpdump_prefix_array holds prefix registers for the following scenario:
- * 64 bit zfcpdump kernel and 31 bit kernel which is to be dumped. We have to
- * save its prefix registers, since they get lost, when switching from 31 bit
- * to 64 bit.
- */
-unsigned int zfcpdump_prefix_array[NR_CPUS + 1] \
-	__attribute__((__section__(".data")));
-
 static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu)
 {
 	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
@@ -266,21 +290,15 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu)
 			   "the dump\n", cpu, NR_CPUS - 1);
 		return;
 	}
-	zfcpdump_save_areas[cpu] = kmalloc(sizeof(union save_area), GFP_KERNEL);
-	__cpu_logical_map[CPU_INIT_NO] = (__u16) phy_cpu;
-	while (signal_processor(CPU_INIT_NO, sigp_stop_and_store_status) ==
-	       sigp_busy)
+	zfcpdump_save_areas[cpu] = kmalloc(sizeof(struct save_area), GFP_KERNEL);
+	while (raw_sigp(phy_cpu, sigp_stop_and_store_status) == sigp_busy)
 		cpu_relax();
-	memcpy(zfcpdump_save_areas[cpu],
-	       (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE,
-	       SAVE_AREA_SIZE);
-#ifdef CONFIG_64BIT
-	/* copy original prefix register */
-	zfcpdump_save_areas[cpu]->s390x.pref_reg = zfcpdump_prefix_array[cpu];
-#endif
+	memcpy_real(zfcpdump_save_areas[cpu],
+		    (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE,
+		    sizeof(struct save_area));
 }
 
-union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
 EXPORT_SYMBOL_GPL(zfcpdump_save_areas);
 
 #else
@@ -389,8 +407,7 @@ static void __init smp_detect_cpus(void)
 		for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) {
 			if (cpu == boot_cpu_addr)
 				continue;
-			__cpu_logical_map[CPU_INIT_NO] = cpu;
-			if (!cpu_stopped(CPU_INIT_NO))
+			if (!raw_cpu_stopped(cpu))
 				continue;
 			smp_get_save_area(c_cpus, cpu);
 			c_cpus++;
@@ -413,8 +430,7 @@ static void __init smp_detect_cpus(void)
 		cpu_addr = info->cpu[cpu].address;
 		if (cpu_addr == boot_cpu_addr)
 			continue;
-		__cpu_logical_map[CPU_INIT_NO] = cpu_addr;
-		if (!cpu_stopped(CPU_INIT_NO)) {
+		if (!raw_cpu_stopped(cpu_addr)) {
 			s_cpus++;
 			continue;
 		}
@@ -533,18 +549,18 @@ static void smp_free_lowcore(int cpu)
 /* Upping and downing of CPUs */
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	struct task_struct *idle;
 	struct _lowcore *cpu_lowcore;
+	struct task_struct *idle;
 	struct stack_frame *sf;
-	sigp_ccode ccode;
 	u32 lowcore;
+	int ccode;
 
 	if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED)
 		return -EIO;
 	if (smp_alloc_lowcore(cpu))
 		return -ENOMEM;
 	do {
-		ccode = signal_processor(cpu, sigp_initial_cpu_reset);
+		ccode = sigp(cpu, sigp_initial_cpu_reset);
 		if (ccode == sigp_busy)
 			udelay(10);
 		if (ccode == sigp_not_operational)
@@ -552,7 +568,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	} while (ccode == sigp_busy);
 
 	lowcore = (u32)(unsigned long)lowcore_ptr[cpu];
-	while (signal_processor_p(lowcore, cpu, sigp_set_prefix) == sigp_busy)
+	while (sigp_p(lowcore, cpu, sigp_set_prefix) == sigp_busy)
 		udelay(10);
 
 	idle = current_set[cpu];
@@ -578,7 +594,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	cpu_lowcore->ftrace_func = S390_lowcore.ftrace_func;
 	eieio();
 
-	while (signal_processor(cpu, sigp_restart) == sigp_busy)
+	while (sigp(cpu, sigp_restart) == sigp_busy)
 		udelay(10);
 
 	while (!cpu_online(cpu))
@@ -640,7 +656,7 @@ void __cpu_die(unsigned int cpu)
 	/* Wait until target cpu is down */
 	while (!cpu_stopped(cpu))
 		cpu_relax();
-	while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy)
+	while (sigp_p(0, cpu, sigp_set_prefix) == sigp_busy)
 		udelay(10);
 	smp_free_lowcore(cpu);
 	pr_info("Processor %d stopped\n", cpu);
@@ -649,7 +665,7 @@ void __cpu_die(unsigned int cpu)
 void cpu_die(void)
 {
 	idle_task_exit();
-	while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+	while (sigp(smp_processor_id(), sigp_stop) == sigp_busy)
 		cpu_relax();
 	for (;;);
 }
@@ -765,7 +781,8 @@ static ssize_t cpu_configure_store(struct sys_device *dev,
 	get_online_cpus();
 	mutex_lock(&smp_cpu_state_mutex);
 	rc = -EBUSY;
-	if (cpu_online(cpu))
+	/* disallow configuration changes of online cpus and cpu 0 */
+	if (cpu_online(cpu) || cpu == 0)
 		goto out;
 	rc = 0;
 	switch (val) {
@@ -927,21 +944,21 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self,
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct sys_device *s = &c->sysdev;
 	struct s390_idle_data *idle;
+	int err = 0;
 
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		idle = &per_cpu(s390_idle, cpu);
 		memset(idle, 0, sizeof(struct s390_idle_data));
-		if (sysfs_create_group(&s->kobj, &cpu_online_attr_group))
-			return NOTIFY_BAD;
+		err = sysfs_create_group(&s->kobj, &cpu_online_attr_group);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		sysfs_remove_group(&s->kobj, &cpu_online_attr_group);
 		break;
 	}
-	return NOTIFY_OK;
+	return notifier_from_errno(err);
 }
 
 static struct notifier_block __cpuinitdata smp_cpu_nb = {
@@ -1004,7 +1021,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf,
+static ssize_t __ref rescan_store(struct sysdev_class *class,
+				  struct sysdev_class_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1015,7 +1034,9 @@ static ssize_t __ref rescan_store(struct sysdev_class *class, const char *buf,
 static SYSDEV_CLASS_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sysdev_class *class, char *buf)
+static ssize_t dispatching_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1025,7 +1046,9 @@ static ssize_t dispatching_show(struct sysdev_class *class, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sysdev_class *dev, const char *buf,
+static ssize_t dispatching_store(struct sysdev_class *dev,
+				 struct sysdev_class_attribute *attr,
+				 const char *buf,
 				 size_t count)
 {
 	int val, rc;
diff --git a/arch/s390/kernel/switch_cpu.S b/arch/s390/kernel/switch_cpu.S
new file mode 100644
index 0000000..469f11b
--- /dev/null
+++ b/arch/s390/kernel/switch_cpu.S
@@ -0,0 +1,58 @@
+/*
+ * 31-bit switch cpu code
+ *
+ * Copyright IBM Corp. 2009
+ *
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
+
+# smp_switch_to_cpu switches to destination cpu and executes the passed function
+# Parameter: %r2 - function to call
+#	     %r3 - function parameter
+#	     %r4 - stack poiner
+#	     %r5 - current cpu
+#	     %r6 - destination cpu
+
+	.section .text
+	.align 4
+	.globl smp_switch_to_cpu
+smp_switch_to_cpu:
+	stm	%r6,%r15,__SF_GPRS(%r15)
+	lr	%r1,%r15
+	ahi	%r15,-STACK_FRAME_OVERHEAD
+	st	%r1,__SF_BACKCHAIN(%r15)
+	basr	%r13,0
+0:	la	%r1,.gprregs_addr-0b(%r13)
+	l	%r1,0(%r1)
+	stm	%r0,%r15,0(%r1)
+1:	sigp	%r0,%r6,__SIGP_RESTART	/* start destination CPU */
+	brc	2,1b			/* busy, try again */
+2:	sigp	%r0,%r5,__SIGP_STOP	/* stop current CPU */
+	brc	2,2b			/* busy, try again */
+3:	j	3b
+
+	.globl	smp_restart_cpu
+smp_restart_cpu:
+	basr	%r13,0
+0:	la	%r1,.gprregs_addr-0b(%r13)
+	l	%r1,0(%r1)
+	lm	%r0,%r15,0(%r1)
+1:	sigp	%r0,%r5,__SIGP_SENSE	/* Wait for calling CPU */
+	brc	10,1b			/* busy, accepted (status 0), running */
+	tmll	%r0,0x40		/* Test if calling CPU is stopped */
+	jz	1b
+	ltr	%r4,%r4			/* New stack ? */
+	jz	1f
+	lr	%r15,%r4
+1:	basr	%r14,%r2
+
+.gprregs_addr:
+	.long	.gprregs
+
+	.section .data,"aw",@progbits
+.gprregs:
+	.rept	16
+	.long	0
+	.endr
diff --git a/arch/s390/kernel/switch_cpu64.S b/arch/s390/kernel/switch_cpu64.S
new file mode 100644
index 0000000..d94aacc
--- /dev/null
+++ b/arch/s390/kernel/switch_cpu64.S
@@ -0,0 +1,51 @@
+/*
+ * 64-bit switch cpu code
+ *
+ * Copyright IBM Corp. 2009
+ *
+ */
+
+#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
+
+# smp_switch_to_cpu switches to destination cpu and executes the passed function
+# Parameter: %r2 - function to call
+#	     %r3 - function parameter
+#	     %r4 - stack poiner
+#	     %r5 - current cpu
+#	     %r6 - destination cpu
+
+	.section .text
+	.align 4
+	.globl smp_switch_to_cpu
+smp_switch_to_cpu:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	larl	%r1,.gprregs
+	stmg	%r0,%r15,0(%r1)
+1:	sigp	%r0,%r6,__SIGP_RESTART	/* start destination CPU */
+	brc	2,1b			/* busy, try again */
+2:	sigp	%r0,%r5,__SIGP_STOP	/* stop current CPU */
+	brc	2,2b			/* busy, try again */
+3:	j	3b
+
+	.globl	smp_restart_cpu
+smp_restart_cpu:
+	larl	%r1,.gprregs
+	lmg	%r0,%r15,0(%r1)
+1:	sigp	%r0,%r5,__SIGP_SENSE	/* Wait for calling CPU */
+	brc	10,1b			/* busy, accepted (status 0), running */
+	tmll	%r0,0x40		/* Test if calling CPU is stopped */
+	jz	1b
+	ltgr	%r4,%r4			/* New stack ? */
+	jz	1f
+	lgr	%r15,%r4
+1:	basr	%r14,%r2
+
+	.section .data,"aw",@progbits
+.gprregs:
+	.rept	16
+	.quad	0
+	.endr
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index e5cd623..1f066e4 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -176,7 +176,7 @@ pgm_check_entry:
 	cgr	%r1,%r2
 	je	restore_registers		/* r1 = r2 -> nothing to do */
 	larl	%r4,.Lrestart_suspend_psw	/* Set new restart PSW */
-	mvc	__LC_RESTART_PSW(16,%r0),0(%r4)
+	mvc	__LC_RST_NEW_PSW(16,%r0),0(%r4)
 3:
 	sigp	%r9,%r1,__SIGP_INITIAL_CPU_RESET
 	brc	8,4f	/* accepted */
@@ -256,6 +256,9 @@ restore_registers:
 	lghi	%r2,0
 	brasl	%r14,arch_set_page_states
 
+	/* Reinitialize the channel subsystem */
+	brasl	%r14,channel_subsystem_reinit
+
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 86a74c9..7b6b0f8 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -33,13 +33,12 @@
 #include "entry.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux for S/390 isn't able to handle more than 5
- * system call parameters, so these system calls used a memory
- * block for parameter passing..
+ * Perform the mmap() system call. Linux for S/390 isn't able to handle more
+ * than 5 system call parameters, so this system call uses a memory block
+ * for parameter passing.
  */
 
-struct mmap_arg_struct {
+struct s390_mmap_arg_struct {
 	unsigned long addr;
 	unsigned long len;
 	unsigned long prot;
@@ -48,9 +47,9 @@ struct mmap_arg_struct {
 	unsigned long offset;
 };
 
-SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
+SYSCALL_DEFINE1(mmap2, struct s390_mmap_arg_struct __user *, arg)
 {
-	struct mmap_arg_struct a;
+	struct s390_mmap_arg_struct a;
 	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
@@ -60,29 +59,12 @@ out:
 	return error;
 }
 
-SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
-{
-	struct mmap_arg_struct a;
-	long error = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return error;
-}
-
 /*
  * sys_ipc() is the de-multiplexer for the SysV IPC calls..
  *
  * This is really horribly ugly.
  */
-SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+SYSCALL_DEFINE5(s390_ipc, uint, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr)
 {
         struct ipc_kludge tmp;
@@ -149,17 +131,6 @@ SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
 }
 
 #ifdef CONFIG_64BIT
-SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-
-	if (personality(current->personality) == PER_LINUX32 && !ret) {
-		ret = copy_to_user(name->machine, "s390\0\0\0\0", 8);
-		if (ret) ret = -EFAULT;
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
 {
 	int ret;
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 30eca07..201ce6b 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -98,7 +98,7 @@ SYSCALL(sys_uselib,sys_uselib,sys32_uselib_wrapper)
 SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
 SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
 SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper)	/* old readdir syscall */
-SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper)	/* 90 */
+SYSCALL(sys_old_mmap,sys_old_mmap,old32_mmap_wrapper)		/* 90 */
 SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
 SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
 SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
@@ -125,12 +125,12 @@ NI_SYSCALL							/* vm86old for i386 */
 SYSCALL(sys_wait4,sys_wait4,compat_sys_wait4_wrapper)
 SYSCALL(sys_swapoff,sys_swapoff,sys32_swapoff_wrapper)		/* 115 */
 SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper)
-SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper)
+SYSCALL(sys_s390_ipc,sys_s390_ipc,sys32_ipc_wrapper)
 SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
 SYSCALL(sys_clone,sys_clone,sys_clone_wrapper)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
 SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index b5e75e1..a0ffc771 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <asm/ebcdic.h>
 #include <asm/sysinfo.h>
 #include <asm/cpcmd.h>
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 65065ac..15a7536 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -36,6 +36,7 @@
 #include <linux/notifier.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/gfp.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
 #include <asm/s390_ext.h>
@@ -51,14 +52,6 @@
 #define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
 #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
 
-/*
- * Create a small time difference between the timer interrupts
- * on the different cpus to avoid lock contention.
- */
-#define CPU_DEVIATION       (smp_processor_id() << 12)
-
-#define TICK_SIZE tick
-
 u64 sched_clock_base_cc = -1;	/* Force to data section. */
 EXPORT_SYMBOL_GPL(sched_clock_base_cc);
 
@@ -81,15 +74,15 @@ unsigned long long monotonic_clock(void)
 }
 EXPORT_SYMBOL(monotonic_clock);
 
-void tod_to_timeval(__u64 todval, struct timespec *xtime)
+void tod_to_timeval(__u64 todval, struct timespec *xt)
 {
 	unsigned long long sec;
 
 	sec = todval >> 12;
 	do_div(sec, 1000000);
-	xtime->tv_sec = sec;
+	xt->tv_sec = sec;
 	todval -= (sec * 1000000) << 12;
-	xtime->tv_nsec = ((todval * 1000) >> 12);
+	xt->tv_nsec = ((todval * 1000) >> 12);
 }
 EXPORT_SYMBOL(tod_to_timeval);
 
@@ -224,10 +217,11 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	++vdso_data->tb_update_count;
 	smp_wmb();
 	vdso_data->xtime_tod_stamp = clock->cycle_last;
-	vdso_data->xtime_clock_sec = xtime.tv_sec;
-	vdso_data->xtime_clock_nsec = xtime.tv_nsec;
+	vdso_data->xtime_clock_sec = wall_time->tv_sec;
+	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
 	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
 	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+	vdso_data->ntp_mult = mult;
 	smp_wmb();
 	++vdso_data->tb_update_count;
 }
@@ -397,7 +391,6 @@ static void __init time_init_wq(void)
 	if (time_sync_wq)
 		return;
 	time_sync_wq = create_singlethread_workqueue("timesync");
-	stop_machine_create();
 }
 
 /*
@@ -531,8 +524,11 @@ void etr_switch_to_local(void)
 	if (!etr_eacr.sl)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events)) {
+		etr_eacr.es = etr_eacr.sl = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -546,8 +542,11 @@ void etr_sync_check(void)
 	if (!etr_eacr.es)
 		return;
 	disable_sync_clock(NULL);
-	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
-	queue_work(time_sync_wq, &etr_work);
+	if (!test_and_set_bit(ETR_EVENT_SYNC_CHECK, &etr_events)) {
+		etr_eacr.es = 0;
+		etr_setr(&etr_eacr);
+		queue_work(time_sync_wq, &etr_work);
+	}
 }
 
 /*
@@ -909,7 +908,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	 * Do not try to get the alternate port aib if the clock
 	 * is not in sync yet.
 	 */
-	if (!check_sync_clock())
+	if (!eacr.es || !check_sync_clock())
 		return eacr;
 
 	/*
@@ -1071,7 +1070,7 @@ static void etr_work_fn(struct work_struct *work)
 	 * If the clock is in sync just update the eacr and return.
 	 * If there is no valid sync port wait for a port update.
 	 */
-	if (check_sync_clock() || sync_port < 0) {
+	if ((eacr.es && check_sync_clock()) || sync_port < 0) {
 		etr_update_eacr(eacr);
 		etr_set_tolec_timeout(now);
 		goto out_unlock;
@@ -1124,14 +1123,18 @@ static struct sys_device etr_port1_dev = {
 /*
  * ETR class attributes
  */
-static ssize_t etr_stepping_port_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_port_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", etr_port0.esw.p);
 }
 
 static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
 
-static ssize_t etr_stepping_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t etr_stepping_mode_show(struct sysdev_class *class,
+				      	struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	char *mode_str;
 
@@ -1592,7 +1595,9 @@ static struct sysdev_class stp_sysclass = {
 	.name	= "stp",
 };
 
-static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_id_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1602,7 +1607,9 @@ static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
 
-static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_ctn_type_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1611,7 +1618,9 @@ static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
 
-static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_dst_offset_show(struct sysdev_class *class,
+				   struct sysdev_class_attribute *attr,
+				   char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x2000))
 		return -ENODATA;
@@ -1620,7 +1629,9 @@ static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
 
-static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_leap_seconds_show(struct sysdev_class *class,
+					struct sysdev_class_attribute *attr,
+					char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x8000))
 		return -ENODATA;
@@ -1629,7 +1640,9 @@ static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
 
-static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_stratum_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1638,7 +1651,9 @@ static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
 
-static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x0800))
 		return -ENODATA;
@@ -1647,7 +1662,9 @@ static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
 
-static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_time_zone_offset_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online || !(stp_info.vbits & 0x4000))
 		return -ENODATA;
@@ -1657,7 +1674,9 @@ static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
 static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
 			 stp_time_zone_offset_show, NULL);
 
-static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_mode_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1666,7 +1685,9 @@ static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
 
-static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_timing_state_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	if (!stp_online)
 		return -ENODATA;
@@ -1675,12 +1696,15 @@ static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
 
 static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
 
-static ssize_t stp_online_show(struct sysdev_class *class, char *buf)
+static ssize_t stp_online_show(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
+				char *buf)
 {
 	return sprintf(buf, "%i\n", stp_online);
 }
 
 static ssize_t stp_online_store(struct sysdev_class *class,
+				struct sysdev_class_attribute *attr,
 				const char *buf, size_t count)
 {
 	unsigned int value;
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 14ef6f0..bcef007 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -37,7 +37,8 @@ struct tl_cpu {
 };
 
 struct tl_container {
-	unsigned char reserved[8];
+	unsigned char reserved[7];
+	unsigned char id;
 };
 
 union tl_entry {
@@ -58,6 +59,7 @@ struct tl_info {
 
 struct core_info {
 	struct core_info *next;
+	unsigned char id;
 	cpumask_t mask;
 };
 
@@ -73,6 +75,7 @@ static DECLARE_WORK(topology_work, topology_work_fn);
 static DEFINE_SPINLOCK(topology_lock);
 
 cpumask_t cpu_core_map[NR_CPUS];
+unsigned char cpu_core_id[NR_CPUS];
 
 static cpumask_t cpu_coregroup_map(unsigned int cpu)
 {
@@ -116,6 +119,7 @@ static void add_cpus_to_core(struct tl_cpu *tl_cpu, struct core_info *core)
 		for_each_present_cpu(lcpu) {
 			if (cpu_logical_map(lcpu) == rcpu) {
 				cpu_set(lcpu, core->mask);
+				cpu_core_id[lcpu] = core->id;
 				smp_cpu_polarization[lcpu] = tl_cpu->pp;
 			}
 		}
@@ -158,6 +162,7 @@ static void tl_to_cores(struct tl_info *info)
 			break;
 		case 1:
 			core = core->next;
+			core->id = tle->container.id;
 			break;
 		case 0:
 			add_cpus_to_core(&tle->cpu, core);
@@ -165,10 +170,11 @@ static void tl_to_cores(struct tl_info *info)
 		default:
 			clear_cores();
 			machine_has_topology = 0;
-			return;
+			goto out;
 		}
 		tle = next_tle(tle);
 	}
+out:
 	spin_unlock_irq(&topology_lock);
 }
 
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 6e7ad63..5d8f0f3 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -46,13 +46,7 @@
 
 pgm_check_handler_t *pgm_check_table[128];
 
-#ifdef CONFIG_SYSCTL
-#ifdef CONFIG_PROCESS_DEBUG
-int sysctl_userprocess_debug = 1;
-#else
-int sysctl_userprocess_debug = 0;
-#endif
-#endif
+int show_unhandled_signals;
 
 extern pgm_check_handler_t do_protection_exception;
 extern pgm_check_handler_t do_dat_exception;
@@ -315,18 +309,19 @@ void die(const char * str, struct pt_regs * regs, long err)
 	do_exit(SIGSEGV);
 }
 
-static void inline
-report_user_fault(long interruption_code, struct pt_regs *regs)
+static void inline report_user_fault(struct pt_regs *regs, long int_code,
+				     int signr)
 {
-#if defined(CONFIG_SYSCTL)
-	if (!sysctl_userprocess_debug)
+	if ((task_pid_nr(current) > 1) && !show_unhandled_signals)
 		return;
-#endif
-#if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
-	printk("User process fault: interruption code 0x%lX\n",
-	       interruption_code);
+	if (!unhandled_signal(current, signr))
+		return;
+	if (!printk_ratelimit())
+		return;
+	printk("User process fault: interruption code 0x%lX ", int_code);
+	print_vma_addr("in ", regs->psw.addr & PSW_ADDR_INSN);
+	printk("\n");
 	show_regs(regs);
-#endif
 }
 
 int is_valid_bugaddr(unsigned long addr)
@@ -354,7 +349,7 @@ static void __kprobes inline do_trap(long interruption_code, int signr,
 
                 tsk->thread.trap_no = interruption_code & 0xffff;
 		force_sig_info(signr, info, tsk);
-		report_user_fault(interruption_code, regs);
+		report_user_fault(regs, interruption_code, signr);
         } else {
                 const struct exception_table_entry *fixup;
                 fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
@@ -390,8 +385,8 @@ static void default_trap_handler(struct pt_regs * regs, long interruption_code)
 {
         if (regs->psw.mask & PSW_MASK_PSTATE) {
 		local_irq_enable();
+		report_user_fault(regs, interruption_code, SIGSEGV);
 		do_exit(SIGSEGV);
-		report_user_fault(interruption_code, regs);
 	} else
 		die("Unknown program exception", regs, interruption_code);
 }
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 5f99e66..6b83870 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -23,6 +23,7 @@
 #include <linux/security.h>
 #include <linux/bootmem.h>
 #include <linux/compat.h>
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
@@ -101,11 +102,7 @@ static void vdso_init_per_cpu_data(int cpu, struct vdso_per_cpu_data *vpcd)
 /*
  * Allocate/free per cpu vdso data.
  */
-#ifdef CONFIG_64BIT
 #define SEGMENT_ORDER	2
-#else
-#define SEGMENT_ORDER	1
-#endif
 
 int vdso_alloc_per_cpu(int cpu, struct _lowcore *lowcore)
 {
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index 4a98909..9696439 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -38,13 +38,13 @@ __kernel_clock_gettime:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,2f
 	ahi	%r0,-1
-2:	mhi	%r0,1000			/* cyc2ns(clock,cycle_delta) */
+2:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
 	lr	%r2,%r0
-	lhi	%r0,1000
+	l	%r0,__VDSO_NTP_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	3f
-	ahi	%r0,1000
+	a	%r0,__VDSO_NTP_MULT(%r5)
 3:	alr	%r0,%r2
 	srdl	%r0,12
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
@@ -86,13 +86,13 @@ __kernel_clock_gettime:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,12f
 	ahi	%r0,-1
-12:	mhi	%r0,1000			/* cyc2ns(clock,cycle_delta) */
+12:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
 	lr	%r2,%r0
-	lhi	%r0,1000
+	l	%r0,__VDSO_NTP_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	13f
-	ahi	%r0,1000
+	a	%r0,__VDSO_NTP_MULT(%r5)
 13:	alr	%r0,%r2
 	srdl	%r0,12
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index ad8acfc..2d36331 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -35,13 +35,13 @@ __kernel_gettimeofday:
 	sl	%r1,__VDSO_XTIME_STAMP+4(%r5)
 	brc	3,3f
 	ahi	%r0,-1
-3:	mhi	%r0,1000			/* cyc2ns(clock,cycle_delta) */
+3:	ms	%r0,__VDSO_NTP_MULT(%r5)	/* cyc2ns(clock,cycle_delta) */
 	st	%r0,24(%r15)
-	lhi	%r0,1000
+	l	%r0,__VDSO_NTP_MULT(%r5)
 	ltr	%r1,%r1
 	mr	%r0,%r0
 	jnm	4f
-	ahi	%r0,1000
+	a	%r0,__VDSO_NTP_MULT(%r5)
 4:	al	%r0,24(%r15)
 	srdl	%r0,12
 	al	%r0,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 49106c6..f404678 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -36,7 +36,7 @@ __kernel_clock_gettime:
 	stck	48(%r15)			/* Store TOD clock */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	mghi	%r1,1000
+	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
 	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
 	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
 	lg	%r0,__VDSO_XTIME_SEC(%r5)
@@ -64,7 +64,7 @@ __kernel_clock_gettime:
 	stck	48(%r15)			/* Store TOD clock */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	mghi	%r1,1000
+	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
 	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
 	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime */
 	lg	%r0,__VDSO_XTIME_SEC(%r5)
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index f873e75..36ee674 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -31,7 +31,7 @@ __kernel_gettimeofday:
 	stck	48(%r15)			/* Store TOD clock */
 	lg	%r1,48(%r15)
 	sg	%r1,__VDSO_XTIME_STAMP(%r5)	/* TOD - cycle_last */
-	mghi	%r1,1000
+	msgf	%r1,__VDSO_NTP_MULT(%r5)	/*  * NTP adjustment */
 	srlg	%r1,%r1,12			/* cyc2ns(clock,cycle_delta) */
 	alg	%r1,__VDSO_XTIME_NSEC(%r5)	/*  + xtime.tv_nsec */
 	lg	%r0,__VDSO_XTIME_SEC(%r5)	/* xtime.tv_sec */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index b59a812..3479f1b 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -121,32 +121,35 @@ void account_system_vtime(struct task_struct *tsk)
 }
 EXPORT_SYMBOL_GPL(account_system_vtime);
 
-void vtime_start_cpu(void)
+void vtime_start_cpu(__u64 int_clock, __u64 enter_timer)
 {
 	struct s390_idle_data *idle = &__get_cpu_var(s390_idle);
 	struct vtimer_queue *vq = &__get_cpu_var(virt_cpu_timer);
 	__u64 idle_time, expires;
 
+	if (idle->idle_enter == 0ULL)
+		return;
+
 	/* Account time spent with enabled wait psw loaded as idle time. */
-	idle_time = S390_lowcore.int_clock - idle->idle_enter;
+	idle_time = int_clock - idle->idle_enter;
 	account_idle_time(idle_time);
 	S390_lowcore.steal_timer +=
 		idle->idle_enter - S390_lowcore.last_update_clock;
-	S390_lowcore.last_update_clock = S390_lowcore.int_clock;
+	S390_lowcore.last_update_clock = int_clock;
 
 	/* Account system time spent going idle. */
 	S390_lowcore.system_timer += S390_lowcore.last_update_timer - vq->idle;
-	S390_lowcore.last_update_timer = S390_lowcore.async_enter_timer;
+	S390_lowcore.last_update_timer = enter_timer;
 
 	/* Restart vtime CPU timer */
 	if (vq->do_spt) {
 		/* Program old expire value but first save progress. */
-		expires = vq->idle - S390_lowcore.async_enter_timer;
+		expires = vq->idle - enter_timer;
 		expires += get_vtimer();
 		set_vtimer(expires);
 	} else {
 		/* Don't account the CPU timer delta while the cpu was idle. */
-		vq->elapsed -= vq->idle - S390_lowcore.async_enter_timer;
+		vq->elapsed -= vq->idle - enter_timer;
 	}
 
 	idle->sequence++;
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 6ee55ae..a725158 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -35,6 +35,7 @@ config KVM
 
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 8300309..9e4c841 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -39,7 +39,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu)
 		vcpu->run->s390_reset_flags = 0;
 		break;
 	default:
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -62,6 +62,6 @@ int kvm_s390_handle_diag(struct kvm_vcpu *vcpu)
 	case 0x308:
 		return __diag_ipl_functions(vcpu);
 	default:
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 }
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index b400964..3ddc308 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -32,7 +32,7 @@ static int handle_lctlg(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_lctlg++;
 	if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	useraddr = disp2;
 	if (base2)
@@ -138,7 +138,7 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 		rc = __kvm_s390_vcpu_store_status(vcpu,
 						  KVM_S390_STORE_STATUS_NOADDR);
 		if (rc >= 0)
-			rc = -ENOTSUPP;
+			rc = -EOPNOTSUPP;
 	}
 
 	if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) {
@@ -150,7 +150,7 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 	}
 
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
@@ -171,9 +171,9 @@ static int handle_validity(struct kvm_vcpu *vcpu)
 			 2*PAGE_SIZE);
 		if (rc)
 			/* user will receive sigsegv, exit to user */
-			rc = -ENOTSUPP;
+			rc = -EOPNOTSUPP;
 	} else
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 
 	if (rc)
 		VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d",
@@ -189,7 +189,7 @@ static int handle_instruction(struct kvm_vcpu *vcpu)
 	handler = instruction_handlers[vcpu->arch.sie_block->ipa >> 8];
 	if (handler)
 		return handler(vcpu);
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
 
 static int handle_prog(struct kvm_vcpu *vcpu)
@@ -206,7 +206,7 @@ static int handle_instruction_and_prog(struct kvm_vcpu *vcpu)
 	rc = handle_instruction(vcpu);
 	rc2 = handle_prog(vcpu);
 
-	if (rc == -ENOTSUPP)
+	if (rc == -EOPNOTSUPP)
 		vcpu->arch.sie_block->icptcode = 0x04;
 	if (rc)
 		return rc;
@@ -231,9 +231,9 @@ int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu)
 	u8 code = vcpu->arch.sie_block->icptcode;
 
 	if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	func = intercept_funcs[code >> 2];
 	if (func)
 		return func(vcpu);
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 43486c2..35c21bf 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -10,12 +10,13 @@
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  */
 
-#include <asm/lowcore.h>
-#include <asm/uaccess.h>
-#include <linux/hrtimer.h>
 #include <linux/interrupt.h>
 #include <linux/kvm_host.h>
+#include <linux/hrtimer.h>
 #include <linux/signal.h>
+#include <linux/slab.h>
+#include <asm/asm-offsets.h>
+#include <asm/uaccess.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -187,8 +188,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 		if (rc == -EFAULT)
 			exception = 1;
 
-		rc = put_guest_u64(vcpu, __LC_PFAULT_INTPARM,
-			inti->ext.ext_params2);
+		rc = put_guest_u64(vcpu, __LC_EXT_PARAMS2,
+				   inti->ext.ext_params2);
 		if (rc == -EFAULT)
 			exception = 1;
 		break;
@@ -342,7 +343,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 	if (psw_interrupts_disabled(vcpu)) {
 		VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
 		__unset_cpu_idle(vcpu);
-		return -ENOTSUPP; /* disabled wait */
+		return -EOPNOTSUPP; /* disabled wait */
 	}
 
 	if (psw_extint_disabled(vcpu) ||
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f8bcaef..ae37058 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
+#include <asm/asm-offsets.h>
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
@@ -241,6 +242,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	kvm_free_physmem(kvm);
 	free_page((unsigned long)(kvm->arch.sca));
 	debug_unregister(kvm->arch.dbf);
+	cleanup_srcu_struct(&kvm->srcu);
 	kfree(kvm);
 }
 
@@ -339,11 +341,13 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 
 	rc = kvm_vcpu_init(vcpu, kvm, id);
 	if (rc)
-		goto out_free_cpu;
+		goto out_free_sie_block;
 	VM_EVENT(kvm, 3, "create cpu %d at %p, sie block at %p", id, vcpu,
 		 vcpu->arch.sie_block);
 
 	return vcpu;
+out_free_sie_block:
+	free_page((unsigned long)(vcpu->arch.sie_block));
 out_free_cpu:
 	kfree(vcpu);
 out_nomem:
@@ -543,7 +547,7 @@ rerun_vcpu:
 		rc = -EINTR;
 	}
 
-	if (rc == -ENOTSUPP) {
+	if (rc == -EOPNOTSUPP) {
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
 		kvm_run->exit_reason         = KVM_EXIT_S390_SIEIC;
 		kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
@@ -603,45 +607,45 @@ int __kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	} else
 		prefix = 0;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, fp_regs),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
 			vcpu->arch.guest_fpregs.fprs, 128, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, gp_regs),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, gp_regs),
 			vcpu->arch.guest_gprs, 128, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, psw),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, psw),
 			&vcpu->arch.sie_block->gpsw, 16, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, pref_reg),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, pref_reg),
 			&vcpu->arch.sie_block->prefix, 4, prefix))
 		return -EFAULT;
 
 	if (__guestcopy(vcpu,
-			addr + offsetof(struct save_area_s390x, fp_ctrl_reg),
+			addr + offsetof(struct save_area, fp_ctrl_reg),
 			&vcpu->arch.guest_fpregs.fpc, 4, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, tod_reg),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, tod_reg),
 			&vcpu->arch.sie_block->todpr, 4, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, timer),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, timer),
 			&vcpu->arch.sie_block->cputm, 8, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, clk_cmp),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, clk_cmp),
 			&vcpu->arch.sie_block->ckc, 8, prefix))
 		return -EFAULT;
 
-	if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, acc_regs),
+	if (__guestcopy(vcpu, addr + offsetof(struct save_area, acc_regs),
 			&vcpu->arch.guest_acrs, 64, prefix))
 		return -EFAULT;
 
 	if (__guestcopy(vcpu,
-			addr + offsetof(struct save_area_s390x, ctrl_regs),
+			addr + offsetof(struct save_area, ctrl_regs),
 			&vcpu->arch.sie_block->gcr, 128, prefix))
 		return -EFAULT;
 	return 0;
@@ -689,14 +693,12 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 }
 
 /* Section: memory related */
-int kvm_arch_set_memory_region(struct kvm *kvm,
-				struct kvm_userspace_memory_region *mem,
-				struct kvm_memory_slot old,
-				int user_alloc)
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+				   struct kvm_memory_slot *memslot,
+				   struct kvm_memory_slot old,
+				   struct kvm_userspace_memory_region *mem,
+				   int user_alloc)
 {
-	int i;
-	struct kvm_vcpu *vcpu;
-
 	/* A few sanity checks. We can have exactly one memory slot which has
 	   to start at guest virtual zero and which has to be located at a
 	   page boundary in userland and which has to end at a page boundary.
@@ -719,14 +721,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	if (!user_alloc)
 		return -EINVAL;
 
+	return 0;
+}
+
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+				struct kvm_userspace_memory_region *mem,
+				struct kvm_memory_slot old,
+				int user_alloc)
+{
+	int i;
+	struct kvm_vcpu *vcpu;
+
 	/* request update of sie control block for all available vcpus */
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (test_and_set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
 			continue;
 		kvm_s390_inject_sigp_stop(vcpu, ACTION_RELOADVCPU_ON_STOP);
 	}
-
-	return 0;
 }
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
@@ -741,7 +752,7 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 static int __init kvm_s390_init(void)
 {
 	int ret;
-	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
 	if (ret)
 		return ret;
 
@@ -750,7 +761,7 @@ static int __init kvm_s390_init(void)
 	 * to hold the maximum amount of facilites. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
-	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
 	if (!facilities) {
 		kvm_exit();
 		return -ENOMEM;
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 06cce82..cfa9d17 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -67,10 +67,14 @@ static inline long kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
 
 static inline void kvm_s390_vcpu_set_mem(struct kvm_vcpu *vcpu)
 {
+	int idx;
 	struct kvm_memory_slot *mem;
+	struct kvm_memslots *memslots;
 
-	down_read(&vcpu->kvm->slots_lock);
-	mem = &vcpu->kvm->memslots[0];
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+	memslots = kvm_memslots(vcpu->kvm);
+
+	mem = &memslots->memslots[0];
 
 	vcpu->arch.sie_block->gmsor = mem->userspace_addr;
 	vcpu->arch.sie_block->gmslm =
@@ -78,7 +82,7 @@ static inline void kvm_s390_vcpu_set_mem(struct kvm_vcpu *vcpu)
 		(mem->npages << PAGE_SHIFT) +
 		VIRTIODESCSPACE - 1ul;
 
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 }
 
 /* implemented in priv.c */
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index d426aac..4420550 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/kvm.h>
+#include <linux/gfp.h>
 #include <linux/errno.h>
 #include <asm/current.h>
 #include <asm/debug.h>
@@ -323,5 +324,5 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)
 		else
 			return handler(vcpu);
 	}
-	return -ENOTSUPP;
+	return -EOPNOTSUPP;
 }
diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S
index 934fd6a..7e9d30d 100644
--- a/arch/s390/kvm/sie64a.S
+++ b/arch/s390/kvm/sie64a.S
@@ -1,20 +1,58 @@
 /*
  * sie64a.S - low level sie call
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2010
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
  * as published by the Free Software Foundation.
  *
  *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ *		 Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
  */
 
 #include <linux/errno.h>
 #include <asm/asm-offsets.h>
+#include <asm/setup.h>
+#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+
+_TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING)
+
+/*
+ * offsets into stackframe
+ * SP_	= offsets into stack sie64 is called with
+ * SPI_ = offsets into irq stack
+ */
+SP_GREGS = __SF_EMPTY
+SP_HOOK  = __SF_EMPTY+8
+SP_GPP	 = __SF_EMPTY+16
+SPI_PSW  = STACK_FRAME_OVERHEAD + __PT_PSW
+
 
-SP_R5 =	5 * 8	# offset into stackframe
-SP_R6 =	6 * 8
+	.macro SPP newpp
+	tm	__LC_MACHINE_FLAGS+6,0x20	# MACHINE_FLAG_SPP
+	jz	0f
+	.insn	s,0xb2800000,\newpp
+0:
+	.endm
+
+sie_irq_handler:
+	SPP	__LC_CMF_HPP			# set host id
+	larl	%r2,sie_inst
+	clg	%r2,SPI_PSW+8(0,%r15)		# intercepted sie
+	jne	1f
+	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
+	lg	%r2,__LC_THREAD_INFO		# pointer thread_info struct
+	tm	__TI_flags+7(%r2),_TIF_EXIT_SIE
+	jz	0f
+	larl	%r2,sie_exit			# work pending, leave sie
+	stg	%r2,__LC_RETURN_PSW+8
+	br	%r14
+0:	larl	%r2,sie_reenter			# re-enter with guest id
+	stg	%r2,__LC_RETURN_PSW+8
+1:	br	%r14
 
 /*
  * sie64a calling convention:
@@ -23,23 +61,34 @@ SP_R6 =	6 * 8
  */
 	.globl	sie64a
 sie64a:
-	lgr	%r5,%r3
-	stmg	%r5,%r14,SP_R5(%r15)	# save register on entry
-	lgr	%r14,%r2		# pointer to sie control block
-	lmg	%r0,%r13,0(%r3)		# load guest gprs 0-13
+	stg	%r3,SP_GREGS(%r15)		# save guest register save area
+	stmg	%r6,%r14,__SF_GPRS(%r15)	# save registers on entry
+	lgr	%r14,%r2			# pointer to sie control block
+	larl	%r5,sie_irq_handler
+	stg	%r2,SP_GPP(%r15)
+	stg	%r5,SP_HOOK(%r15)		# save hook target
+	lmg	%r0,%r13,0(%r3)			# load guest gprs 0-13
+sie_reenter:
+	mvc	__LC_SIE_HOOK(8),SP_HOOK(%r15)
+	SPP	SP_GPP(%r15)			# set guest id
 sie_inst:
 	sie	0(%r14)
-	lg	%r14,SP_R5(%r15)
-	stmg	%r0,%r13,0(%r14)	# save guest gprs 0-13
+	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
+	SPP	__LC_CMF_HPP			# set host id
+sie_exit:
+	lg	%r14,SP_GREGS(%r15)
+	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
 	lghi	%r2,0
-	lmg	%r6,%r14,SP_R6(%r15)
+	lmg	%r6,%r14,__SF_GPRS(%r15)
 	br	%r14
 
 sie_err:
-	lg	%r14,SP_R5(%r15)
-	stmg	%r0,%r13,0(%r14)	# save guest gprs 0-13
+	xc	__LC_SIE_HOOK(8),__LC_SIE_HOOK
+	SPP	__LC_CMF_HPP			# set host id
+	lg	%r14,SP_GREGS(%r15)
+	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
 	lghi	%r2,-EFAULT
-	lmg	%r6,%r14,SP_R6(%r15)
+	lmg	%r6,%r14,__SF_GPRS(%r15)
 	br	%r14
 
 	.section __ex_table,"a"
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 15ee111..702276f 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -14,6 +14,7 @@
 
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
+#include <linux/slab.h>
 #include "gaccess.h"
 #include "kvm-s390.h"
 
@@ -112,7 +113,7 @@ static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)
 {
 	struct kvm_s390_interrupt_info *inti;
 
-	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
+	inti = kzalloc(sizeof(*inti), GFP_ATOMIC);
 	if (!inti)
 		return -ENOMEM;
 	inti->type = KVM_S390_SIGP_STOP;
@@ -172,7 +173,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 		rc = 0; /* order accepted */
 		break;
 	default:
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 	}
 	return rc;
 }
@@ -293,7 +294,7 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 		vcpu->stat.instruction_sigp_restart++;
 		/* user space must know about restart */
 	default:
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	if (rc < 0)
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 97975ec..761ab8b 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,7 @@
 #
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+obj-y += usercopy.o
 obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index cff327f..91754ff 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -43,16 +43,24 @@ void arch_spin_lock_wait(arch_spinlock_t *lp)
 {
 	int count = spin_retry;
 	unsigned int cpu = ~smp_processor_id();
+	unsigned int owner;
 
 	while (1) {
-		if (count-- <= 0) {
-			unsigned int owner = lp->owner_cpu;
-			if (owner != 0)
-				_raw_yield_cpu(~owner);
-			count = spin_retry;
+		owner = lp->owner_cpu;
+		if (!owner || smp_vcpu_scheduled(~owner)) {
+			for (count = spin_retry; count > 0; count--) {
+				if (arch_spin_is_locked(lp))
+					continue;
+				if (_raw_compare_and_swap(&lp->owner_cpu, 0,
+							  cpu) == 0)
+					return;
+			}
+			if (MACHINE_IS_LPAR)
+				continue;
 		}
-		if (arch_spin_is_locked(lp))
-			continue;
+		owner = lp->owner_cpu;
+		if (owner)
+			_raw_yield_cpu(~owner);
 		if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0)
 			return;
 	}
@@ -63,17 +71,27 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 {
 	int count = spin_retry;
 	unsigned int cpu = ~smp_processor_id();
+	unsigned int owner;
 
 	local_irq_restore(flags);
 	while (1) {
-		if (count-- <= 0) {
-			unsigned int owner = lp->owner_cpu;
-			if (owner != 0)
-				_raw_yield_cpu(~owner);
-			count = spin_retry;
+		owner = lp->owner_cpu;
+		if (!owner || smp_vcpu_scheduled(~owner)) {
+			for (count = spin_retry; count > 0; count--) {
+				if (arch_spin_is_locked(lp))
+					continue;
+				local_irq_disable();
+				if (_raw_compare_and_swap(&lp->owner_cpu, 0,
+							  cpu) == 0)
+					return;
+				local_irq_restore(flags);
+			}
+			if (MACHINE_IS_LPAR)
+				continue;
 		}
-		if (arch_spin_is_locked(lp))
-			continue;
+		owner = lp->owner_cpu;
+		if (owner)
+			_raw_yield_cpu(~owner);
 		local_irq_disable();
 		if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0)
 			return;
@@ -100,8 +118,11 @@ EXPORT_SYMBOL(arch_spin_trylock_retry);
 void arch_spin_relax(arch_spinlock_t *lock)
 {
 	unsigned int cpu = lock->owner_cpu;
-	if (cpu != 0)
-		_raw_yield_cpu(~cpu);
+	if (cpu != 0) {
+		if (MACHINE_IS_VM || MACHINE_IS_KVM ||
+		    !smp_vcpu_scheduled(~cpu))
+			_raw_yield_cpu(~cpu);
+	}
 }
 EXPORT_SYMBOL(arch_spin_relax);
 
diff --git a/arch/s390/lib/usercopy.c b/arch/s390/lib/usercopy.c
new file mode 100644
index 0000000..14b363f
--- /dev/null
+++ b/arch/s390/lib/usercopy.c
@@ -0,0 +1,8 @@
+#include <linux/module.h>
+#include <linux/bug.h>
+
+void copy_from_user_overflow(void)
+{
+	WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 76a3637..eb6a2ef 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -1,17 +1,16 @@
 /*
- *  arch/s390/mm/cmm.c
+ *  Collaborative memory management interface.
  *
- *  S390 version
- *    Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *    Copyright IBM Corp 2003,2010
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
  *
- *  Collaborative memory management interface.
  */
 
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/sysctl.h>
 #include <linux/ctype.h>
@@ -19,9 +18,9 @@
 #include <linux/kthread.h>
 #include <linux/oom.h>
 #include <linux/suspend.h>
+#include <linux/uaccess.h>
 
 #include <asm/pgalloc.h>
-#include <asm/uaccess.h>
 #include <asm/diag.h>
 
 static char *sender = "VMRMSVM";
@@ -52,14 +51,14 @@ static struct cmm_page_array *cmm_timed_page_list;
 static DEFINE_SPINLOCK(cmm_lock);
 
 static struct task_struct *cmm_thread_ptr;
-static wait_queue_head_t cmm_thread_wait;
-static struct timer_list cmm_timer;
+static DECLARE_WAIT_QUEUE_HEAD(cmm_thread_wait);
+static DEFINE_TIMER(cmm_timer, NULL, 0, 0);
 
 static void cmm_timer_fn(unsigned long);
 static void cmm_set_timer(void);
 
-static long
-cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list)
+static long cmm_alloc_pages(long nr, long *counter,
+			    struct cmm_page_array **list)
 {
 	struct cmm_page_array *pa, *npa;
 	unsigned long addr;
@@ -98,8 +97,7 @@ cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list)
 	return nr;
 }
 
-static long
-cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
+static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list)
 {
 	struct cmm_page_array *pa;
 	unsigned long addr;
@@ -139,11 +137,10 @@ static int cmm_oom_notify(struct notifier_block *self,
 }
 
 static struct notifier_block cmm_oom_nb = {
-	.notifier_call = cmm_oom_notify
+	.notifier_call = cmm_oom_notify,
 };
 
-static int
-cmm_thread(void *dummy)
+static int cmm_thread(void *dummy)
 {
 	int rc;
 
@@ -169,7 +166,7 @@ cmm_thread(void *dummy)
 				cmm_timed_pages_target = cmm_timed_pages;
 		} else if (cmm_timed_pages_target < cmm_timed_pages) {
 			cmm_free_pages(1, &cmm_timed_pages,
-			       	       &cmm_timed_page_list);
+				       &cmm_timed_page_list);
 		}
 		if (cmm_timed_pages > 0 && !timer_pending(&cmm_timer))
 			cmm_set_timer();
@@ -177,14 +174,12 @@ cmm_thread(void *dummy)
 	return 0;
 }
 
-static void
-cmm_kick_thread(void)
+static void cmm_kick_thread(void)
 {
 	wake_up(&cmm_thread_wait);
 }
 
-static void
-cmm_set_timer(void)
+static void cmm_set_timer(void)
 {
 	if (cmm_timed_pages_target <= 0 || cmm_timeout_seconds <= 0) {
 		if (timer_pending(&cmm_timer))
@@ -201,8 +196,7 @@ cmm_set_timer(void)
 	add_timer(&cmm_timer);
 }
 
-static void
-cmm_timer_fn(unsigned long ignored)
+static void cmm_timer_fn(unsigned long ignored)
 {
 	long nr;
 
@@ -215,57 +209,49 @@ cmm_timer_fn(unsigned long ignored)
 	cmm_set_timer();
 }
 
-void
-cmm_set_pages(long nr)
+static void cmm_set_pages(long nr)
 {
 	cmm_pages_target = nr;
 	cmm_kick_thread();
 }
 
-long
-cmm_get_pages(void)
+static long cmm_get_pages(void)
 {
 	return cmm_pages;
 }
 
-void
-cmm_add_timed_pages(long nr)
+static void cmm_add_timed_pages(long nr)
 {
 	cmm_timed_pages_target += nr;
 	cmm_kick_thread();
 }
 
-long
-cmm_get_timed_pages(void)
+static long cmm_get_timed_pages(void)
 {
 	return cmm_timed_pages;
 }
 
-void
-cmm_set_timeout(long nr, long seconds)
+static void cmm_set_timeout(long nr, long seconds)
 {
 	cmm_timeout_pages = nr;
 	cmm_timeout_seconds = seconds;
 	cmm_set_timer();
 }
 
-static int
-cmm_skip_blanks(char *cp, char **endp)
+static int cmm_skip_blanks(char *cp, char **endp)
 {
 	char *str;
 
-	for (str = cp; *str == ' ' || *str == '\t'; str++);
+	for (str = cp; *str == ' ' || *str == '\t'; str++)
+		;
 	*endp = str;
 	return str != cp;
 }
 
-#ifdef CONFIG_CMM_PROC
-
 static struct ctl_table cmm_table[];
 
-static int
-cmm_pages_handler(ctl_table *ctl, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos)
+static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer,
+			     size_t *lenp, loff_t *ppos)
 {
 	char buf[16], *p;
 	long nr;
@@ -304,9 +290,8 @@ cmm_pages_handler(ctl_table *ctl, int write,
 	return 0;
 }
 
-static int
-cmm_timeout_handler(ctl_table *ctl, int write,
-		    void __user *buffer, size_t *lenp, loff_t *ppos)
+static int cmm_timeout_handler(ctl_table *ctl, int write,  void __user *buffer,
+			       size_t *lenp, loff_t *ppos)
 {
 	char buf[64], *p;
 	long nr, seconds;
@@ -369,12 +354,10 @@ static struct ctl_table cmm_dir_table[] = {
 	},
 	{ }
 };
-#endif
 
 #ifdef CONFIG_CMM_IUCV
 #define SMSG_PREFIX "CMM"
-static void
-cmm_smsg_target(char *from, char *msg)
+static void cmm_smsg_target(const char *from, char *msg)
 {
 	long nr, seconds;
 
@@ -444,16 +427,13 @@ static struct notifier_block cmm_power_notifier = {
 	.notifier_call = cmm_power_event,
 };
 
-static int
-cmm_init (void)
+static int cmm_init(void)
 {
 	int rc = -ENOMEM;
 
-#ifdef CONFIG_CMM_PROC
 	cmm_sysctl_header = register_sysctl_table(cmm_dir_table);
 	if (!cmm_sysctl_header)
 		goto out_sysctl;
-#endif
 #ifdef CONFIG_CMM_IUCV
 	rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
 	if (rc < 0)
@@ -465,8 +445,6 @@ cmm_init (void)
 	rc = register_pm_notifier(&cmm_power_notifier);
 	if (rc)
 		goto out_pm;
-	init_waitqueue_head(&cmm_thread_wait);
-	init_timer(&cmm_timer);
 	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
 	rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0;
 	if (rc)
@@ -482,36 +460,26 @@ out_oom_notify:
 	smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
 out_smsg:
 #endif
-#ifdef CONFIG_CMM_PROC
 	unregister_sysctl_table(cmm_sysctl_header);
 out_sysctl:
-#endif
+	del_timer_sync(&cmm_timer);
 	return rc;
 }
+module_init(cmm_init);
 
-static void
-cmm_exit(void)
+static void cmm_exit(void)
 {
-	kthread_stop(cmm_thread_ptr);
-	unregister_pm_notifier(&cmm_power_notifier);
-	unregister_oom_notifier(&cmm_oom_nb);
-	cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
-	cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
-#ifdef CONFIG_CMM_PROC
 	unregister_sysctl_table(cmm_sysctl_header);
-#endif
 #ifdef CONFIG_CMM_IUCV
 	smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
 #endif
+	unregister_pm_notifier(&cmm_power_notifier);
+	unregister_oom_notifier(&cmm_oom_nb);
+	kthread_stop(cmm_thread_ptr);
+	del_timer_sync(&cmm_timer);
+	cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
+	cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
 }
-
-module_init(cmm_init);
 module_exit(cmm_exit);
 
-EXPORT_SYMBOL(cmm_set_pages);
-EXPORT_SYMBOL(cmm_get_pages);
-EXPORT_SYMBOL(cmm_add_timed_pages);
-EXPORT_SYMBOL(cmm_get_timed_pages);
-EXPORT_SYMBOL(cmm_set_timeout);
-
 MODULE_LICENSE("GPL");
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 5c84571..3cc95dd 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -105,7 +105,7 @@ static int
 dcss_set_subcodes(void)
 {
 #ifdef CONFIG_64BIT
-	char *name = kmalloc(8 * sizeof(char), GFP_DMA);
+	char *name = kmalloc(8 * sizeof(char), GFP_KERNEL | GFP_DMA);
 	unsigned long rx, ry;
 	int rc;
 
@@ -252,12 +252,13 @@ dcss_diag_translate_rc (int vm_rc) {
 static int
 query_segment_type (struct dcss_segment *seg)
 {
-	struct qin64  *qin = kmalloc (sizeof(struct qin64), GFP_DMA);
-	struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);
-
-	int diag_cc, rc, i;
 	unsigned long dummy, vmrc;
+	int diag_cc, rc, i;
+	struct qout64 *qout;
+	struct qin64 *qin;
 
+	qin = kmalloc(sizeof(*qin), GFP_KERNEL | GFP_DMA);
+	qout = kmalloc(sizeof(*qout), GFP_KERNEL | GFP_DMA);
 	if ((qin == NULL) || (qout == NULL)) {
 		rc = -ENOMEM;
 		goto out_free;
@@ -286,7 +287,7 @@ query_segment_type (struct dcss_segment *seg)
 	   copy data for the new format. */
 	if (segext_scode == DCSS_SEGEXT) {
 		struct qout64_old *qout_old;
-		qout_old = kzalloc(sizeof(struct qout64_old), GFP_DMA);
+		qout_old = kzalloc(sizeof(*qout_old), GFP_KERNEL | GFP_DMA);
 		if (qout_old == NULL) {
 			rc = -ENOMEM;
 			goto out_free;
@@ -309,7 +310,7 @@ query_segment_type (struct dcss_segment *seg)
 	}
 #endif
 	if (qout->segcnt > 6) {
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto out_free;
 	}
 
@@ -324,11 +325,11 @@ query_segment_type (struct dcss_segment *seg)
 		for (i=0; i<qout->segcnt; i++) {
 			if (((qout->range[i].start & 0xff) != SEG_TYPE_EW) &&
 			    ((qout->range[i].start & 0xff) != SEG_TYPE_EN)) {
-				rc = -ENOTSUPP;
+				rc = -EOPNOTSUPP;
 				goto out_free;
 			}
 			if (start != qout->range[i].start >> PAGE_SHIFT) {
-				rc = -ENOTSUPP;
+				rc = -EOPNOTSUPP;
 				goto out_free;
 			}
 			start = (qout->range[i].end >> PAGE_SHIFT) + 1;
@@ -357,7 +358,7 @@ query_segment_type (struct dcss_segment *seg)
  * -ENOSYS  : we are not running on VM
  * -EIO     : could not perform query diagnose
  * -ENOENT  : no such segment
- * -ENOTSUPP: multi-part segment cannot be used with linux
+ * -EOPNOTSUPP: multi-part segment cannot be used with linux
  * -ENOMEM  : out of memory
  * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h
  */
@@ -407,11 +408,11 @@ segment_overlaps_others (struct dcss_segment *seg)
 static int
 __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end)
 {
-	struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),
-			GFP_DMA);
-	int rc, diag_cc;
 	unsigned long start_addr, end_addr, dummy;
+	struct dcss_segment *seg;
+	int rc, diag_cc;
 
+	seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA);
 	if (seg == NULL) {
 		rc = -ENOMEM;
 		goto out;
@@ -515,7 +516,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
  * -ENOSYS  : we are not running on VM
  * -EIO     : could not perform query or load diagnose
  * -ENOENT  : no such segment
- * -ENOTSUPP: multi-part segment cannot be used with linux
+ * -EOPNOTSUPP: multi-part segment cannot be used with linux
  * -ENOSPC  : segment cannot be used (overlaps with storage)
  * -EBUSY   : segment can temporarily not be used (overlaps with dcss)
  * -ERANGE  : segment cannot be used (exceeds kernel mapping range)
@@ -742,7 +743,7 @@ void segment_warning(int rc, char *seg_name)
 		pr_err("Loading or querying DCSS %s resulted in a "
 		       "hardware error\n", seg_name);
 		break;
-	case -ENOTSUPP:
+	case -EOPNOTSUPP:
 		pr_err("DCSS %s has multiple page ranges and cannot be "
 		       "loaded or queried\n", seg_name);
 		break;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index fc102e7..2505b2e 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -30,6 +30,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/hugetlb.h>
+#include <asm/asm-offsets.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/s390_ext.h>
@@ -47,10 +48,6 @@
 #define __PF_RES_FIELD 0x8000000000000000ULL
 #endif /* CONFIG_64BIT */
 
-#ifdef CONFIG_SYSCTL
-extern int sysctl_userprocess_debug;
-#endif
-
 #define VM_FAULT_BADCONTEXT	0x010000
 #define VM_FAULT_BADMAP		0x020000
 #define VM_FAULT_BADACCESS	0x040000
@@ -59,15 +56,13 @@ static inline int notify_page_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
-#ifdef CONFIG_KPROBES
 	/* kprobe_running() needs smp_processor_id() */
-	if (!user_mode(regs)) {
+	if (kprobes_built_in() && !user_mode(regs)) {
 		preempt_disable();
 		if (kprobe_running() && kprobe_fault_handler(regs, 14))
 			ret = 1;
 		preempt_enable();
 	}
-#endif
 	return ret;
 }
 
@@ -121,6 +116,22 @@ static inline int user_space_fault(unsigned long trans_exc_code)
 	return trans_exc_code != 3;
 }
 
+static inline void report_user_fault(struct pt_regs *regs, long int_code,
+				     int signr, unsigned long address)
+{
+	if ((task_pid_nr(current) > 1) && !show_unhandled_signals)
+		return;
+	if (!unhandled_signal(current, signr))
+		return;
+	if (!printk_ratelimit())
+		return;
+	printk("User process fault: interruption code 0x%lX ", int_code);
+	print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN);
+	printk("\n");
+	printk("failing address: %lX\n", address);
+	show_regs(regs);
+}
+
 /*
  * Send SIGSEGV to task.  This is an external routine
  * to keep the stack usage of do_page_fault small.
@@ -134,17 +145,7 @@ static noinline void do_sigsegv(struct pt_regs *regs, long int_code,
 	address = trans_exc_code & __FAIL_ADDR_MASK;
 	current->thread.prot_addr = address;
 	current->thread.trap_no = int_code;
-#if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
-#if defined(CONFIG_SYSCTL)
-	if (sysctl_userprocess_debug)
-#endif
-	{
-		printk("User process fault: interruption code 0x%lX\n",
-		       int_code);
-		printk("failing address: %lX\n", address);
-		show_regs(regs);
-	}
-#endif
+	report_user_fault(regs, int_code, SIGSEGV, address);
 	si.si_signo = SIGSEGV;
 	si.si_code = si_code;
 	si.si_addr = (void __user *) address;
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 7656479..acc91c7 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/pfn.h>
 #include <linux/poison.h>
 #include <linux/initrd.h>
+#include <linux/gfp.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -143,33 +144,34 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 }
 #endif
 
-void free_initmem(void)
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
 {
-        unsigned long addr;
+	unsigned long addr = begin;
 
-        addr = (unsigned long)(&__init_begin);
-        for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+	if (begin >= end)
+		return;
+	for (; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
+		memset((void *)(addr & PAGE_MASK), POISON_FREE_INITMEM,
+		       PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
-        }
-        printk ("Freeing unused kernel memory: %ldk freed\n",
-		((unsigned long)&__init_end - (unsigned long)&__init_begin) >> 10);
+	}
+	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
+}
+
+void free_initmem(void)
+{
+	free_init_pages("unused kernel memory",
+			(unsigned long)&__init_begin,
+			(unsigned long)&__init_end);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-        if (start < end)
-                printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-        for (; start < end; start += PAGE_SIZE) {
-                ClearPageReserved(virt_to_page(start));
-                init_page_count(virt_to_page(start));
-                free_page(start);
-                totalram_pages++;
-        }
+	free_init_pages("initrd memory", start, end);
 }
 #endif
 
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 8175627..a8c2af8 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -59,3 +59,29 @@ long probe_kernel_write(void *dst, void *src, size_t size)
 	}
 	return copied < 0 ? -EFAULT : 0;
 }
+
+int memcpy_real(void *dest, void *src, size_t count)
+{
+	register unsigned long _dest asm("2") = (unsigned long) dest;
+	register unsigned long _len1 asm("3") = (unsigned long) count;
+	register unsigned long _src  asm("4") = (unsigned long) src;
+	register unsigned long _len2 asm("5") = (unsigned long) count;
+	unsigned long flags;
+	int rc = -EFAULT;
+
+	if (!count)
+		return 0;
+	flags = __raw_local_irq_stnsm(0xf8UL);
+	asm volatile (
+		"0:	mvcle	%1,%2,0x0\n"
+		"1:	jo	0b\n"
+		"	lhi	%0,0x0\n"
+		"2:\n"
+		EX_TABLE(1b,2b)
+		: "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1),
+		  "+d" (_len2), "=m" (*((long *) dest))
+		: "m" (*((long *) src))
+		: "cc", "memory");
+	__raw_local_irq_ssm(flags);
+	return rc;
+}
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index 098923a..a90d45e 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/mm.h>
+#include <linux/gfp.h>
 #include <linux/init.h>
 
 #define ESSA_SET_STABLE		1
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index ad621e0..8d99924 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -6,11 +6,11 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/highmem.h>
-#include <linux/slab.h>
 #include <linux/pagemap.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 300ab01..90165e7 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/hugetlb.h>
+#include <linux/slab.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/setup.h>
@@ -70,12 +71,8 @@ static pte_t __ref *vmem_pte_alloc(void)
 		pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
 	if (!pte)
 		return NULL;
-	if (MACHINE_HAS_HPAGE)
-		clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO,
-			    PTRS_PER_PTE * sizeof(pte_t));
-	else
-		clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
-			    PTRS_PER_PTE * sizeof(pte_t));
+	clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+		    PTRS_PER_PTE * sizeof(pte_t));
 	return pte;
 }
 
@@ -116,8 +113,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
 		    (address + HPAGE_SIZE <= start + size) &&
 		    (address >= HPAGE_SIZE)) {
-			pte_val(pte) |= _SEGMENT_ENTRY_LARGE |
-					_SEGMENT_ENTRY_CO;
+			pte_val(pte) |= _SEGMENT_ENTRY_LARGE;
 			pmd_val(*pm_dir) = pte_val(pte);
 			address += HPAGE_SIZE - PAGE_SIZE;
 			continue;
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 674934b..ccf38f0 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -272,8 +272,9 @@ extern void __update_cache(struct vm_area_struct *vma,
 	unsigned long address,	pte_t pte);
 
 static inline void update_mmu_cache(struct vm_area_struct *vma,
-	unsigned long address, pte_t pte)
+	unsigned long address, pte_t *ptep)
 {
+	pte_t pte = *ptep;
 	__update_tlb(vma, address, pte);
 	__update_cache(vma, address, pte);
 }
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
index d40e691..e89dc9b 100644
--- a/arch/score/include/asm/ptrace.h
+++ b/arch/score/include/asm/ptrace.h
@@ -90,8 +90,7 @@ extern int read_tsk_short(struct task_struct *, unsigned long,
 			 unsigned short *);
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h
index 9f533b8..4fa1a66 100644
--- a/arch/score/include/asm/scatterlist.h
+++ b/arch/score/include/asm/scatterlist.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_SCORE_SCATTERLIST_H
 #define _ASM_SCORE_SCATTERLIST_H
 
+#define ISA_DMA_THRESHOLD	(~0UL)
+
 #include <asm-generic/scatterlist.h>
 
 #endif /* _ASM_SCORE_SCATTERLIST_H */
diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h
index 5593999..8570d08 100644
--- a/arch/score/include/asm/thread_info.h
+++ b/arch/score/include/asm/thread_info.h
@@ -92,7 +92,7 @@ register struct thread_info *__current_thread_info __asm__("r28");
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling
 						 TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 856ed68..651096f 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -28,6 +28,7 @@
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/unistd.h>
 #include <linux/syscalls.h>
 #include <asm/syscalls.h>
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index dfaf458..50fdec5 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/bootmem.h>
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/mman.h>
@@ -59,7 +60,7 @@ static unsigned long setup_zero_page(void)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-static int __init page_is_ram(unsigned long pagenr)
+int page_is_ram(unsigned long pagenr)
 {
 	if (pagenr >= min_low_pfn && pagenr < max_low_pfn)
 		return 1;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2121fbb..82868fe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -9,11 +9,10 @@ config SUPERH
 	def_bool y
 	select EMBEDDED
 	select HAVE_CLK
-	select HAVE_IDE
-	select HAVE_LMB
+	select HAVE_IDE if HAS_IOPORT
+	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
@@ -22,6 +21,7 @@ config SUPERH
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
 	select HAVE_SYSCALL_TRACEPOINTS
 	select RTC_LIB
 	select GENERIC_ATOMIC64
@@ -35,6 +35,7 @@ config SUPERH32
 	def_bool ARCH = "sh"
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_IOREMAP_PROT if MMU && !X2TLB
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
@@ -42,6 +43,9 @@ config SUPERH32
 	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
+	select HAVE_HW_BREAKPOINT
+	select HAVE_MIXED_BREAKPOINTS_REGS
+	select PERF_EVENTS if HAVE_HW_BREAKPOINT
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
 config SUPERH64
@@ -78,11 +82,12 @@ config GENERIC_HARDIRQS
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
 
-config GENERIC_IRQ_PROBE
+config IRQ_PER_CPU
 	def_bool y
 
-config IRQ_PER_CPU
+config SPARSE_IRQ
 	def_bool y
+	depends on SUPERH32
 
 config GENERIC_GPIO
 	def_bool n
@@ -153,7 +158,6 @@ config LOCKDEP_SUPPORT
 
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
-	depends on !SMP
 
 config ARCH_HAS_ILOG2_U32
 	def_bool n
@@ -170,6 +174,9 @@ config ARCH_HAS_DEFAULT_IDLE
 config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
+config NO_IOPORT
+	bool
+
 config IO_TRAPPED
 	bool
 
@@ -179,6 +186,12 @@ config DMA_COHERENT
 config DMA_NONCOHERENT
 	def_bool !DMA_COHERENT
 
+config NEED_DMA_MAP_STATE
+	def_bool DMA_NONCOHERENT
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -230,6 +243,8 @@ config CPU_SHX2
 config CPU_SHX3
 	bool
 	select DMA_COHERENT
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_NUMA
 
 config ARCH_SHMOBILE
 	bool
@@ -446,18 +461,12 @@ config CPU_SUBTYPE_SH7786
 	select CPU_SH4A
 	select CPU_SHX3
 	select CPU_HAS_PTEAEX
-	select ARCH_SPARSEMEM_ENABLE
-	select SYS_SUPPORTS_NUMA
-	select SYS_SUPPORTS_SMP
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
 	select CPU_SH4A
 	select CPU_SHX3
-	select ARCH_SPARSEMEM_ENABLE
-	select SYS_SUPPORTS_NUMA
-	select SYS_SUPPORTS_SMP
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 # SH4AL-DSP Processor Support
@@ -548,8 +557,7 @@ config SH_PCLK_FREQ
 			      CPU_SUBTYPE_SH7203 || \
 			      CPU_SUBTYPE_SH7206 || \
 			      CPU_SUBTYPE_SH7263 || \
-			      CPU_SUBTYPE_MXG    || \
-			      CPU_SUBTYPE_SH7786
+			      CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
@@ -563,7 +571,8 @@ config SH_CLK_CPG
 
 config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
-	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE
+	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
+		      !CPU_SUBTYPE_SH7786
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
@@ -627,7 +636,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on SUPERH32 && EXPERIMENTAL
+	depends on SUPERH32 && EXPERIMENTAL && BROKEN_ON_SMP
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
@@ -699,6 +708,13 @@ config NR_CPUS
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+	depends on SMP && HOTPLUG && EXPERIMENTAL
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
 source "kernel/Kconfig.preempt"
 
 config GUSA
@@ -725,17 +741,7 @@ config GUSA_RB
 	  LLSC, this should be more efficient than the other alternative of
 	  disabling interrupts around the atomic sequence.
 
-config SPARSE_IRQ
-	bool "Support sparse irq numbering"
-	depends on EXPERIMENTAL
-	help
-	  This enables support for sparse irqs. This is useful in general
-	  as most CPUs have a fairly sparse array of IRQ vectors, which
-	  the irq_desc then maps directly on to. Systems with a high
-	  number of off-chip IRQs will want to treat this as
-	  experimental until they have been independently verified.
-
-	  If you don't know what to do here, say N.
+source "drivers/sh/Kconfig"
 
 endmenu
 
@@ -773,6 +779,17 @@ config ENTRY_OFFSET
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00000000"
 
+config ROMIMAGE_MMCIF
+	bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
+	depends on CPU_SUBTYPE_SH7724 && EXPERIMENTAL
+	help
+	  Say Y here to include experimental MMCIF loading code in
+	  romImage. With this enabled it is possible to write the romImage
+	  kernel image to an MMC card and boot the kernel straight from
+	  the reset vector. At reset the processor Mask ROM will load the
+	  first part of the romImage which in turn loads the rest the kernel
+	  image to RAM using the MMCIF hardware block.
+
 choice
 	prompt "Kernel command line"
 	optional
@@ -822,11 +839,15 @@ config MAPLE
 config PCI
 	bool "PCI support"
 	depends on SYS_SUPPORTS_PCI
+	select PCI_DOMAINS
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. If you have PCI, say Y, otherwise N.
 
+config PCI_DOMAINS
+	bool
+
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"
@@ -864,4 +885,20 @@ source "security/Kconfig"
 
 source "crypto/Kconfig"
 
+menuconfig VIRTUALIZATION
+	bool "Virtualization"
+	default n
+	---help---
+	  Say Y here to get to see options for using your Linux host to run other
+	  operating systems inside virtual machines (guests).
+	  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if VIRTUALIZATION
+
+source drivers/virtio/Kconfig
+
+endif # VIRTUALIZATION
+
 source "lib/Kconfig"
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index cd6e3ea..ddf096c 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -68,7 +68,8 @@ config SH_STORE_QUEUES
 
 config SPECULATIVE_EXECUTION
 	bool "Speculative subroutine return"
-	depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+	depends on EXPERIMENTAL
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7786
 	help
 	  This enables support for a speculative instruction fetch for
 	  subroutine return. There are various pitfalls associated with
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index db91925..307b3a4 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -143,11 +143,11 @@ machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa
 machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
 machdir-$(CONFIG_SH_ECOVEC)			+= mach-ecovec24
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_SDK7786)			+= mach-sdk7786
 machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
 machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
-machdir-$(CONFIG_SH_TITAN)			+= mach-titan
 machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
 machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 machdir-$(CONFIG_SH_RSK)			+= mach-rsk
@@ -203,8 +203,9 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
-	       zImage vmlinux.srec romImage
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \
+	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
+	       romImage
 PHONY += $(BOOT_TARGETS)
 
 all: $(KBUILD_IMAGE)
@@ -225,10 +226,12 @@ define archhelp
 	@echo '  zImage 	           - Compressed kernel image'
 	@echo '  romImage	           - Compressed ROM image, if supported'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
+	@echo '  vmlinux.bin	           - Create an uncompressed binary image'
 	@echo '* uImage  	           - Alias to bootable U-Boot image'
 	@echo '  uImage.srec	           - Create an S-record for U-Boot'
 	@echo '  uImage.bin	           - Kernel-only image for U-Boot (bin)'
 	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
 	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
 	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
+	@echo '  uImage.lzo	           - Kernel-only image for U-Boot (lzo)'
 endef
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index aedd9de..07b35ca 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -150,6 +150,15 @@ config SH_SDK7780
 	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
 	  evaluation board.
 
+config SH_SDK7786
+	bool "SDK7786"
+	depends on CPU_SUBTYPE_SH7786
+	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
+	help
+	  Select SDK7786 if configuring for a Renesas Technology Europe
+	  SH7786-65nm board.
+
 config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
@@ -182,6 +191,7 @@ config SH_URQUELL
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_PCI
+	select NO_IOPORT if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
@@ -278,6 +288,7 @@ config SH_LBOX_RE2
 config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT if !PCI
 
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index ce0f263..4f90f9b 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
+obj-$(CONFIG_SH_TITAN)		+= board-titan.o
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 99ffc5f..efba450 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -23,7 +23,7 @@
 #include <asm/heartbeat.h>
 #include <cpu/sh7720.h>
 
-#define LAN9115_READY	(ctrl_inl(0xA8000084UL) & 0x00000001UL)
+#define LAN9115_READY	(__raw_readl(0xA8000084UL) & 0x00000001UL)
 
 /* Prefer cmdline over RedBoot */
 static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
@@ -60,33 +60,33 @@ static void __init setup_chip_select(void)
 {
 	/* CS2: LAN (0x08000000 - 0x0bffffff) */
 	/* no idle cycles, normal space, 8 bit data bus */
-	ctrl_outl(0x36db0400, CS2BCR);
+	__raw_writel(0x36db0400, CS2BCR);
 	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
-	ctrl_outl(0x000003c0, CS2WCR);
+	__raw_writel(0x000003c0, CS2WCR);
 
 	/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
 	/* no idle cycles, normal space, 8 bit data bus */
-	ctrl_outl(0x00000200, CS4BCR);
+	__raw_writel(0x00000200, CS4BCR);
 	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
-	ctrl_outl(0x00100981, CS4WCR);
+	__raw_writel(0x00100981, CS4WCR);
 
 	/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
 	/* no idle cycles, normal space, 8 bit data bus */
-	ctrl_outl(0x00000200, CS5ABCR);
+	__raw_writel(0x00000200, CS5ABCR);
 	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
-	ctrl_outl(0x00100981, CS5AWCR);
+	__raw_writel(0x00100981, CS5AWCR);
 
 	/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
 	/* no idle cycles, normal space, 8 bit data bus */
-	ctrl_outl(0x00000200, CS5BBCR);
+	__raw_writel(0x00000200, CS5BBCR);
 	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
-	ctrl_outl(0x00100981, CS5BWCR);
+	__raw_writel(0x00100981, CS5BWCR);
 
 	/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
 	/* no idle cycles, normal space, 8 bit data bus */
-	ctrl_outl(0x00000200, CS6ABCR);
+	__raw_writel(0x00000200, CS6ABCR);
 	/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
-	ctrl_outl(0x001009C1, CS6AWCR);
+	__raw_writel(0x001009C1, CS6AWCR);
 }
 
 static void __init setup_port_multiplexing(void)
@@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void)
 	/* A7 GPO(LED8);     A6 GPO(LED7);     A5 GPO(LED6);	  A4 GPO(LED5);
 	 * A3 GPO(LED4);     A2 GPO(LED3);     A1 GPO(LED2);	  A0 GPO(LED1);
 	 */
-	ctrl_outw(0x5555, PORT_PACR);	/* 01 01 01 01 01 01 01 01 */
+	__raw_writew(0x5555, PORT_PACR);	/* 01 01 01 01 01 01 01 01 */
 
 	/* B7 GPO(RST4);   B6 GPO(RST3);  B5 GPO(RST2);    B4 GPO(RST1);
 	 * B3 GPO(PB3);	   B2 GPO(PB2);	  B1 GPO(PB1);	   B0 GPO(PB0);
 	 */
-	ctrl_outw(0x5555, PORT_PBCR);	/* 01 01 01 01 01 01 01 01 */
+	__raw_writew(0x5555, PORT_PBCR);	/* 01 01 01 01 01 01 01 01 */
 
 	/* C7 GPO(PC7);	  C6 GPO(PC6);	  C5 GPO(PC5);	   C4 GPO(PC4);
 	 * C3 LCD_DATA3;  C2 LCD_DATA2;   C1 LCD_DATA1;	   C0 LCD_DATA0;
 	 */
-	ctrl_outw(0x5500, PORT_PCCR);	/* 01 01 01 01 00 00 00 00 */
+	__raw_writew(0x5500, PORT_PCCR);	/* 01 01 01 01 00 00 00 00 */
 
 	/* D7 GPO(PD7);	D6 GPO(PD6);	D5 GPO(PD5);	   D4 GPO(PD4);
 	 * D3 GPO(PD3);	D2 GPO(PD2);	D1 GPO(PD1);	   D0 GPO(PD0);
 	 */
-	ctrl_outw(0x5555, PORT_PDCR);	/* 01 01 01 01 01 01 01 01 */
+	__raw_writew(0x5555, PORT_PDCR);	/* 01 01 01 01 01 01 01 01 */
 
 	/* E7 (x);	  E6 GPI(nu);	 E5 GPI(nu);	  E4 LCD_M_DISP;
 	 * E3 LCD_CL1;	  E2 LCD_CL2;	 E1 LCD_DON;	  E0 LCD_FLM;
 	 */
-	ctrl_outw(0x3C00, PORT_PECR);	/* 00 11 11 00 00 00 00 00 */
+	__raw_writew(0x3C00, PORT_PECR);	/* 00 11 11 00 00 00 00 00 */
 
 	/* F7 (x);	     F6 DA1(VLCD);     F5 DA0(nc);	  F4 AN3;
 	 * F3 AN2(MID_AD);   F2 AN1(EARTH_AD); F1 AN0(TEMP);	  F0 GPI+(nc);
 	 */
-	ctrl_outw(0x0002, PORT_PFCR);	/* 00 00 00 00 00 00 00 10 */
+	__raw_writew(0x0002, PORT_PFCR);	/* 00 00 00 00 00 00 00 10 */
 
 	/* G7 (x);	  G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
 	 * G3 GPI(KEY1);  G2 GPO(LED11);	G1 GPO(LED10);     G0 GPO(LED9);
 	 */
-	ctrl_outw(0x03D5, PORT_PGCR);	/* 00 00 00 11 11 01 01 01 */
+	__raw_writew(0x03D5, PORT_PGCR);	/* 00 00 00 11 11 01 01 01 */
 
 	/* H7 (x);	      H6 /RAS(BRAS);	  H5 /CAS(BCAS); H4 CKE(BCKE);
 	 * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR;	 H0 USB1_PWR;
 	 */
-	ctrl_outw(0x0050, PORT_PHCR);	/* 00 00 00 00 01 01 00 00 */
+	__raw_writew(0x0050, PORT_PHCR);	/* 00 00 00 00 01 01 00 00 */
 
 	/* J7 (x);	  J6 AUDCK;	   J5 ASEBRKAK;	    J4 AUDATA3;
 	 * J3 AUDATA2;	  J2 AUDATA1;	   J1 AUDATA0;	    J0 AUDSYNC;
 	 */
-	ctrl_outw(0x0000, PORT_PJCR);	/* 00 00 00 00 00 00 00 00 */
+	__raw_writew(0x0000, PORT_PJCR);	/* 00 00 00 00 00 00 00 00 */
 
 	/* K7 (x);	    K6 (x);	     K5 (x);	   K4 (x);
 	 * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
 	 */
-	ctrl_outw(0x00FF, PORT_PKCR);	/* 00 00 00 00 11 11 11 11 */
+	__raw_writew(0x00FF, PORT_PKCR);	/* 00 00 00 00 11 11 11 11 */
 
 	/* L7 TRST;	   L6 TMS;	     L5 TDO;		  L4 TDI;
 	 * L3 TCK;	   L2 (x);	     L1 (x);		  L0 (x);
 	 */
-	ctrl_outw(0x0000, PORT_PLCR);	/* 00 00 00 00 00 00 00 00 */
+	__raw_writew(0x0000, PORT_PLCR);	/* 00 00 00 00 00 00 00 00 */
 
 	/* M7 GPO(CURRENT_SINK);    M6 GPO(PWR_SWITCH);     M5 GPO(LAN_SPEED);
 	 * M4 GPO(LAN_RESET);       M3 GPO(BUZZER);	    M2 GPO(LCD_BL);
 	 * M1 CS5B(CAN3_CS);	    M0 GPI+(nc);
 	 */
-	ctrl_outw(0x5552, PORT_PMCR);	   /* 01 01 01 01 01 01 00 10 */
+	__raw_writew(0x5552, PORT_PMCR);	   /* 01 01 01 01 01 01 00 10 */
 
 	/* CURRENT_SINK=off,	PWR_SWITCH=off, LAN_SPEED=100MBit,
 	 * LAN_RESET=off,	BUZZER=off,	LCD_BL=off
 	 */
 #if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
-	ctrl_outb(0x30, PORT_PMDR);
+	__raw_writeb(0x30, PORT_PMDR);
 #elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
-	ctrl_outb(0xF0, PORT_PMDR);
+	__raw_writeb(0xF0, PORT_PMDR);
 #else
 #error Unknown revision of PLATFORM_MP_R2
 #endif
@@ -167,8 +167,8 @@ static void __init setup_port_multiplexing(void)
 	 * P4 GPO(nu);	       P3 IRQ3(LAN_IRQ);  P2 IRQ2(CAN3_IRQ);
 	 * P1 IRQ1(CAN2_IRQ);  P0 IRQ0(CAN1_IRQ)
 	 */
-	ctrl_outw(0x0100, PORT_PPCR);	/* 00 00 00 01 00 00 00 00 */
-	ctrl_outb(0x10, PORT_PPDR);
+	__raw_writew(0x0100, PORT_PPCR);	/* 00 00 00 01 00 00 00 00 */
+	__raw_writeb(0x10, PORT_PPDR);
 
 	/* R7 A25;	     R6 A24;	     R5 A23;		  R4 A22;
 	 * R3 A21;	     R2 A20;	     R1 A19;		  R0 A0;
@@ -185,22 +185,22 @@ static void __init setup_port_multiplexing(void)
 	/* S7 (x);		S6 (x);        S5 (x);	     S4 GPO(EEPROM_CS2);
 	 * S3 GPO(EEPROM_CS1);  S2 SIOF0_TXD;  S1 SIOF0_RXD; S0 SIOF0_SCK;
 	 */
-	ctrl_outw(0x0140, PORT_PSCR);	/* 00 00 00 01 01 00 00 00 */
+	__raw_writew(0x0140, PORT_PSCR);	/* 00 00 00 01 01 00 00 00 */
 
 	/* T7 (x);	   T6 (x);	  T5 (x);	  T4 COM1_CTS;
 	 * T3 COM1_RTS;	   T2 COM1_TXD;	  T1 COM1_RXD;	  T0 GPO(WDOG)
 	 */
-	ctrl_outw(0x0001, PORT_PTCR);	/* 00 00 00 00 00 00 00 01 */
+	__raw_writew(0x0001, PORT_PTCR);	/* 00 00 00 00 00 00 00 01 */
 
 	/* U7 (x);	     U6 (x);	   U5 (x);	  U4 GPI+(/AC_FAULT);
 	 * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD;  U0 TOUCH_SCK;
 	 */
-	ctrl_outw(0x0240, PORT_PUCR);	/* 00 00 00 10 01 00 00 00 */
+	__raw_writew(0x0240, PORT_PUCR);	/* 00 00 00 10 01 00 00 00 */
 
 	/* V7 (x);	  V6 (x);	V5 (x);		  V4 GPO(MID2);
 	 * V3 GPO(MID1);  V2 CARD_TxD;	V1 CARD_RxD;	  V0 GPI+(/BAT_FAULT);
 	 */
-	ctrl_outw(0x0142, PORT_PVCR);	/* 00 00 00 01 01 00 00 10 */
+	__raw_writew(0x0142, PORT_PVCR);	/* 00 00 00 01 01 00 00 10 */
 }
 
 static void __init mpr2_setup(char **cmdline_p)
@@ -209,24 +209,24 @@ static void __init mpr2_setup(char **cmdline_p)
 	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
 	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
 	 */
-	ctrl_outw(0xAABC, PORT_PSELA);
+	__raw_writew(0xAABC, PORT_PSELA);
 	/* set Pin Select Register B:
 	 * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
 	 * LCD_VEPWC,  IIC_SDA,    IIC_SCL, Reserved
 	 */
-	ctrl_outw(0x3C00, PORT_PSELB);
+	__raw_writew(0x3C00, PORT_PSELB);
 	/* set Pin Select Register C:
 	 * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
 	 */
-	ctrl_outw(0x0000, PORT_PSELC);
+	__raw_writew(0x0000, PORT_PSELC);
 	/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
 	 * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
 	 */
-	ctrl_outw(0x0000, PORT_PSELD);
+	__raw_writew(0x0000, PORT_PSELD);
 	/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
-	ctrl_outw(0x0101, PORT_UTRCTL);
+	__raw_writew(0x0101, PORT_UTRCTL);
 	/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
-	ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+	__raw_writew(0xA5C0, PORT_UCLKCR_W);
 
 	setup_chip_select();
 
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
index 62607eb..5948663 100644
--- a/arch/sh/boards/board-polaris.c
+++ b/arch/sh/boards/board-polaris.c
@@ -59,15 +59,12 @@ static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 8,
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PORT_PCDR,
-		.end	= PORT_PCDR,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start	= PORT_PCDR,
+	.end	= PORT_PCDR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -76,8 +73,8 @@ static struct platform_device heartbeat_device = {
 	.dev	= {
 		.platform_data	= &heartbeat_data,
 	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct platform_device *polaris_devices[] __initdata = {
@@ -92,15 +89,15 @@ static int __init polaris_initialise(void)
 	printk(KERN_INFO "Configuring Polaris external bus\n");
 
 	/* Configure area 5 with 2 wait states */
-	wcr = ctrl_inw(WCR2);
+	wcr = __raw_readw(WCR2);
 	wcr &= (~AREA5_WAIT_CTRL);
 	wcr |= (WAIT_STATES_10 << 10);
-	ctrl_outw(wcr, WCR2);
+	__raw_writew(wcr, WCR2);
 
 	/* Configure area 5 for 32-bit access */
-	bcr_mask = ctrl_inw(BCR2);
+	bcr_mask = __raw_readw(BCR2);
 	bcr_mask |= 1 << 10;
-	ctrl_outw(bcr_mask, BCR2);
+	__raw_writew(bcr_mask, BCR2);
 
 	return platform_add_devices(polaris_devices,
 				    ARRAY_SIZE(polaris_devices));
@@ -131,13 +128,13 @@ static struct ipr_desc ipr_irq_desc = {
 static void __init init_polaris_irq(void)
 {
 	/* Disable all interrupts */
-	ctrl_outw(0, BCR_ILCRA);
-	ctrl_outw(0, BCR_ILCRB);
-	ctrl_outw(0, BCR_ILCRC);
-	ctrl_outw(0, BCR_ILCRD);
-	ctrl_outw(0, BCR_ILCRE);
-	ctrl_outw(0, BCR_ILCRF);
-	ctrl_outw(0, BCR_ILCRG);
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
 
 	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index e5a8a2f..fe7e686 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -21,6 +21,7 @@
 #include <linux/i2c-algo-pca.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <mach/sh7785lcr.h>
@@ -32,26 +33,17 @@
  * NOTE: This board has 2 physical memory maps.
  *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
  */
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PLD_LEDCR,
-		.end	= PLD_LEDCR,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 8,
+static struct resource heartbeat_resource = {
+	.start	= PLD_LEDCR,
+	.end	= PLD_LEDCR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct mtd_partition nor_flash_partitions[] = {
@@ -341,8 +333,14 @@ static void __init sh7785lcr_setup(char **cmdline_p)
 	pm_power_off = sh7785lcr_power_off;
 
 	/* sm501 DRAM configuration */
-	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
-	writel(0x000307c2, sm501_reg);
+	sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+	if (!sm501_reg) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+
+	writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+	iounmap(sm501_reg);
 }
 
 /* Return the board specific boot mode pin configuration */
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index b1dcbbc..325bed5 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -17,8 +17,8 @@
 
 static void __init init_shmin_irq(void)
 {
-	ctrl_outw(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
-	ctrl_outw(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
+	__raw_writew(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
+	__raw_writew(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
 	plat_irq_setup_pins(IRQ_MODE_IRQ);
 }
 
diff --git a/arch/sh/boards/board-titan.c b/arch/sh/boards/board-titan.c
new file mode 100644
index 0000000..94c36c7b
--- /dev/null
+++ b/arch/sh/boards/board-titan.c
@@ -0,0 +1,24 @@
+/*
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <mach/titan.h>
+#include <asm/io.h>
+
+static void __init init_titan_irq(void)
+{
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static struct sh_machine_vector mv_titan __initmv = {
+	.mv_name	= "Titan",
+	.mv_init_irq	= init_titan_irq,
+};
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c
index 36b8bac..d81c609 100644
--- a/arch/sh/boards/board-urquell.c
+++ b/arch/sh/boards/board-urquell.c
@@ -2,7 +2,7 @@
  * Renesas Technology Corp. SH7786 Urquell Support.
  *
  * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
- * Copyright (C) 2009  Paul Mundt
+ * Copyright (C) 2009, 2010  Paul Mundt
  *
  * Based on board-sh7785lcr.c
  * Copyright (C) 2008  Yoshihiro Shimoda
@@ -19,10 +19,12 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/clk.h>
 #include <mach/urquell.h>
 #include <cpu/sh7786.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
+#include <asm/smp-ops.h>
 
 /*
  * bit  1234 5678
@@ -50,26 +52,17 @@
  */
 
 /* HeartBeat */
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= BOARDREG(SLEDR),
-		.end	= BOARDREG(SLEDR),
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
+static struct resource heartbeat_resource = {
+	.start	= BOARDREG(SLEDR),
+	.end	= BOARDREG(SLEDR),
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 /* LAN91C111 */
@@ -184,12 +177,35 @@ static int urquell_mode_pins(void)
 	return __raw_readw(UBOARDREG(MDSWMR));
 }
 
+static int urquell_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
 /* Initialize the board */
 static void __init urquell_setup(char **cmdline_p)
 {
 	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
 
 	pm_power_off = urquell_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
 }
 
 /*
@@ -200,4 +216,5 @@ static struct sh_machine_vector mv_urquell __initmv = {
 	.mv_setup	= urquell_setup,
 	.mv_init_irq	= urquell_init_irq,
 	.mv_mode_pins	= urquell_mode_pins,
+	.mv_clk_init	= urquell_clk_init,
 };
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 1f5fa5c..3a170bd 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -159,21 +159,21 @@ static void ap320_wvga_power_on(void *board_data)
 	msleep(100);
 
 	/* ASD AP-320/325 LCD ON */
-	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+	__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
 
 	/* backlight */
 	gpio_set_value(GPIO_PTS3, 0);
-	ctrl_outw(0x100, FPGA_BKLREG);
+	__raw_writew(0x100, FPGA_BKLREG);
 }
 
 static void ap320_wvga_power_off(void *board_data)
 {
 	/* backlight */
-	ctrl_outw(0, FPGA_BKLREG);
+	__raw_writew(0, FPGA_BKLREG);
 	gpio_set_value(GPIO_PTS3, 1);
 
 	/* ASD AP-320/325 LCD OFF */
-	ctrl_outw(0, FPGA_LCDREG);
+	__raw_writew(0, FPGA_LCDREG);
 }
 
 static struct sh_mobile_lcdc_info lcdc_info = {
@@ -328,7 +328,7 @@ static struct soc_camera_platform_info camera_info = {
 	.set_capture = camera_set_capture,
 };
 
-struct soc_camera_link camera_link = {
+static struct soc_camera_link camera_link = {
 	.bus_id		= 0,
 	.add_device	= ap325rxa_camera_add,
 	.del_device	= ap325rxa_camera_del,
@@ -420,7 +420,7 @@ static struct resource sdhi0_cn3_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 101,
+		.start	= 100,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -443,7 +443,7 @@ static struct resource sdhi1_cn7_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 24,
+		.start	= 23,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -471,8 +471,8 @@ static struct i2c_board_info ap325rxa_i2c_camera[] = {
 };
 
 static struct ov772x_camera_info ov7725_info = {
-	.buswidth	= SOCAM_DATAWIDTH_8,
-	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \
+			  OV772X_FLAG_8BIT,
 	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
 };
 
@@ -595,7 +595,7 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_request(GPIO_PTZ4, NULL);
 	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
 
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	__raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
 
 	/* FLCTL */
 	gpio_request(GPIO_FN_FCE, NULL);
@@ -613,9 +613,9 @@ static int __init ap325rxa_devices_setup(void)
 	gpio_request(GPIO_FN_FWE, NULL);
 	gpio_request(GPIO_FN_FRB, NULL);
 
-	ctrl_outw(0, PORT_HIZCRC);
-	ctrl_outw(0xFFFF, PORT_DRVCRA);
-	ctrl_outw(0xFFFF, PORT_DRVCRB);
+	__raw_writew(0, PORT_HIZCRC);
+	__raw_writew(0xFFFF, PORT_DRVCRA);
+	__raw_writew(0xFFFF, PORT_DRVCRB);
 
 	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
 
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 33f7708..1394b07 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -66,9 +66,9 @@ static void enable_cayman_irq(unsigned int irq)
 	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
 	bit = 1<<(irq % 8);
 	local_irq_save(flags);
-	mask = ctrl_inl(reg);
+	mask = __raw_readl(reg);
 	mask |= bit;
-	ctrl_outl(mask, reg);
+	__raw_writel(mask, reg);
 	local_irq_restore(flags);
 }
 
@@ -83,9 +83,9 @@ void disable_cayman_irq(unsigned int irq)
 	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
 	bit = 1<<(irq % 8);
 	local_irq_save(flags);
-	mask = ctrl_inl(reg);
+	mask = __raw_readl(reg);
 	mask &= ~bit;
-	ctrl_outl(mask, reg);
+	__raw_writel(mask, reg);
 	local_irq_restore(flags);
 }
 
@@ -109,8 +109,8 @@ int cayman_irq_demux(int evt)
 		unsigned long status;
 		int i;
 
-		status = ctrl_inl(EPLD_STATUS_BASE) &
-			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		status = __raw_readl(EPLD_STATUS_BASE) &
+			 __raw_readl(EPLD_MASK_BASE) & 0xff;
 		if (status == 0) {
 			irq = -1;
 		} else {
@@ -126,8 +126,8 @@ int cayman_irq_demux(int evt)
 		unsigned long status;
 		int i;
 
-		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
-			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
 		if (status == 0) {
 			irq = -1;
 		} else {
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index f55fc8e..d932667 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -135,3 +135,30 @@ int systemasic_irq_demux(int irq)
 	/* Not reached */
 	return irq;
 }
+
+void systemasic_irq_init(void)
+{
+	int i, nid = cpu_to_node(boot_cpu_data);
+
+	/* Assign all virtual IRQs to the System ASIC int. handler */
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
+		unsigned int irq;
+
+		irq = create_irq_nr(i, nid);
+		if (unlikely(irq == 0)) {
+			pr_err("%s: failed hooking irq %d for systemasic\n",
+			       __func__, i);
+			return;
+		}
+
+		if (unlikely(irq != i)) {
+			pr_err("%s: got irq %d but wanted %d, bailing.\n",
+			       __func__, irq, i);
+			destroy_irq(irq);
+			return;
+		}
+
+		set_irq_chip_and_handler(i, &systemasic_int,
+					 handle_level_irq);
+	}
+}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index a743368..061d657 100644
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -35,11 +35,11 @@ static void aica_rtc_gettimeofday(struct timespec *ts)
 	unsigned long val1, val2;
 
 	do {
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
 
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
 	} while (val1 != val2);
 
 	ts->tv_sec = val1 - TWENTY_YEARS;
@@ -60,14 +60,14 @@ static int aica_rtc_settimeofday(const time_t secs)
 	unsigned long adj = secs + TWENTY_YEARS;
 
 	do {
-		ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
-		ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+		__raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+		__raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
 
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
 
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
 	} while (val1 != val2);
 
 	return 0;
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index a4b7402..ad1a4db 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -28,25 +28,8 @@
 #include <asm/machvec.h>
 #include <mach/sysasic.h>
 
-extern struct irq_chip systemasic_int;
-extern void aica_time_init(void);
-extern int systemasic_irq_demux(int);
-
 static void __init dreamcast_setup(char **cmdline_p)
 {
-	int i;
-
-	/* Mask all hardware events */
-	/* XXX */
-
-	/* Acknowledge any previous events */
-	/* XXX */
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		set_irq_chip_and_handler(i, &systemasic_int,
-					 handle_level_irq);
-
 	board_time_init = aica_time_init;
 }
 
@@ -54,4 +37,5 @@ static struct sh_machine_vector mv_dreamcast __initmv = {
 	.mv_name		= "Sega Dreamcast",
 	.mv_setup		= dreamcast_setup,
 	.mv_irq_demux		= systemasic_irq_demux,
+	.mv_init_irq		= systemasic_irq_init,
 };
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
index 8334400..3963c6f 100644
--- a/arch/sh/boards/mach-ecovec24/sdram.S
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -37,6 +37,10 @@ ENTRY(ecovec24_sdram_enter_end)
 	.balign 4
 ENTRY(ecovec24_sdram_leave_start)
 
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
 	/* DBSC: put memory in auto-refresh mode */
 
 	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
@@ -49,4 +53,59 @@ ENTRY(ecovec24_sdram_leave_start)
 	rts
 	 nop
 
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+
 ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5c24628..1d7b495 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -11,6 +11,9 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
@@ -22,10 +25,8 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/sh_msiof.h>
 #include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <media/sh_mobile_ceu.h>
@@ -64,18 +65,16 @@
 
 /* Heartbeat */
 static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
 static struct heartbeat_data heartbeat_data = {
-	.regsize = 8,
 	.nr_bits = 4,
 	.bit_pos = led_pos,
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = 0xA405012C, /* PTG */
-		.end    = 0xA405012E - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start  = 0xA405012C, /* PTG */
+	.end    = 0xA405012E - 1,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -84,8 +83,8 @@ static struct platform_device heartbeat_device = {
 	.dev = {
 		.platform_data = &heartbeat_data,
 	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
 };
 
 /* MTD */
@@ -140,7 +139,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 	.ether_link_active_low = 1
@@ -160,7 +159,7 @@ static struct platform_device sh_eth_device = {
 };
 
 /* USB0 host */
-void usb0_port_power(int port, int power)
+static void usb0_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB4, power);
 }
@@ -196,7 +195,7 @@ static struct platform_device usb0_host_device = {
 };
 
 /* USB1 host/function */
-void usb1_port_power(int port, int power)
+static void usb1_port_power(int port, int power)
 {
 	gpio_set_value(GPIO_PTB5, power);
 }
@@ -422,7 +421,7 @@ static int ts_init(void)
 	return 0;
 }
 
-struct tsc2007_platform_data tsc2007_info = {
+static struct tsc2007_platform_data tsc2007_info = {
 	.model			= 2007,
 	.x_plate_ohms		= 180,
 	.get_pendown_state	= ts_get_pendown_state,
@@ -437,14 +436,16 @@ static struct i2c_board_info ts_i2c_clients = {
 };
 
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
-/* SHDI0 */
+/* SDHI0 */
 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB6, state);
 }
 
 static struct sh_mobile_sdhi_info sdhi0_info = {
-	.set_pwr = sdhi0_set_pwr,
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.set_pwr	= sdhi0_set_pwr,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -455,7 +456,7 @@ static struct resource sdhi0_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 101,
+		.start  = 100,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -473,14 +474,17 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
-/* SHDI1 */
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 {
 	gpio_set_value(GPIO_PTB7, state);
 }
 
 static struct sh_mobile_sdhi_info sdhi1_info = {
-	.set_pwr = sdhi1_set_pwr,
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.set_pwr	= sdhi1_set_pwr,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -491,7 +495,7 @@ static struct resource sdhi1_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 24,
+		.start  = 23,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -508,6 +512,7 @@ static struct platform_device sdhi1_device = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
 };
+#endif /* CONFIG_MMC_SH_MMCIF */
 
 #else
 
@@ -698,13 +703,13 @@ static struct platform_device camera_devices[] = {
 #define FCLKBCR		0xa415000c
 static void fsimck_init(struct clk *clk)
 {
-	u32 status = ctrl_inl(clk->enable_reg);
+	u32 status = __raw_readl(clk->enable_reg);
 
 	/* use external clock */
 	status &= ~0x000000ff;
 	status |= 0x00000080;
 
-	ctrl_outl(status, clk->enable_reg);
+	__raw_writel(status, clk->enable_reg);
 }
 
 static struct clk_ops fsimck_clk_ops = {
@@ -712,14 +717,12 @@ static struct clk_ops fsimck_clk_ops = {
 };
 
 static struct clk fsimckb_clk = {
-	.name		= "fsimckb_clk",
-	.id		= -1,
 	.ops		= &fsimck_clk_ops,
 	.enable_reg	= (void __iomem *)FCLKBCR,
 	.rate		= 0, /* unknown */
 };
 
-struct sh_fsi_platform_info fsi_info = {
+static struct sh_fsi_platform_info fsi_info = {
 	.portb_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -753,6 +756,123 @@ static struct platform_device fsi_device = {
 	},
 };
 
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 20,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/ak881x.h>
+#include <media/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+	.module_name	= "ak881x",
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 55,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+	.archdata	= {
+		.hwblk_id	= HWBLK_VOU,
+	},
+};
+
+#if defined(CONFIG_MMC_SH_MMCIF)
+/* SH_MMCIF */
+static void mmcif_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static void mmcif_down_pwr(struct platform_device *pdev)
+{
+	gpio_set_value(GPIO_PTB7, 0);
+}
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.set_pwr	= mmcif_set_pwr,
+	.down_pwr	= mmcif_down_pwr,
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -765,7 +885,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&keysc_device,
 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
 	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	&sdhi1_device,
+#endif
 #else
 	&msiof0_device,
 #endif
@@ -773,8 +895,14 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&camera_devices[1],
 	&camera_devices[2],
 	&fsi_device,
+	&irda_device,
+	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF)
+	&sh_mmcif_device,
+#endif
 };
 
+#ifdef CONFIG_I2C
 #define EEPROM_ADDR 0x50
 static u8 mac_read(struct i2c_adapter *a, u8 command)
 {
@@ -816,7 +944,15 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
 		pd->mac_addr[i] = mac_read(a, 0x10 + i);
 		msleep(10);
 	}
+
+	i2c_put_adapter(a);
 }
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
 
 #define PORT_HIZA 0xA4050158
 #define IODRIVEA  0xA405018A
@@ -831,7 +967,8 @@ static int __init arch_setup(void)
 	struct clk *clk;
 
 	/* register board specific self-refresh code */
-	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
 					&ecovec24_sdram_enter_start,
 					&ecovec24_sdram_enter_end,
 					&ecovec24_sdram_leave_start,
@@ -855,7 +992,7 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTG1, 0);
 	gpio_direction_output(GPIO_PTG2, 0);
 	gpio_direction_output(GPIO_PTG3, 0);
-	ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
 
 	/* enable SH-Eth */
 	gpio_request(GPIO_PTA1, NULL);
@@ -875,16 +1012,16 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_LNKSTA,       NULL);
 
 	/* enable USB */
-	ctrl_outw(0x0000, 0xA4D80000);
-	ctrl_outw(0x0000, 0xA4D90000);
+	__raw_writew(0x0000, 0xA4D80000);
+	__raw_writew(0x0000, 0xA4D90000);
 	gpio_request(GPIO_PTB3,  NULL);
 	gpio_request(GPIO_PTB4,  NULL);
 	gpio_request(GPIO_PTB5,  NULL);
 	gpio_direction_input(GPIO_PTB3);
 	gpio_direction_output(GPIO_PTB4, 0);
 	gpio_direction_output(GPIO_PTB5, 0);
-	ctrl_outw(0x0600, 0xa40501d4);
-	ctrl_outw(0x0600, 0xa4050192);
+	__raw_writew(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa4050192);
 
 	if (gpio_get_value(GPIO_PTB3)) {
 		printk(KERN_INFO "USB1 function is selected\n");
@@ -925,7 +1062,7 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_LCDVSYN,  NULL);
 	gpio_request(GPIO_FN_LCDDON,   NULL);
 	gpio_request(GPIO_FN_LCDLCLK,  NULL);
-	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
 
 	gpio_request(GPIO_PTE6, NULL);
 	gpio_request(GPIO_PTU1, NULL);
@@ -937,7 +1074,7 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTA2, 0);
 
 	/* I/O buffer drive ability is high */
-	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
 
 	if (gpio_get_value(GPIO_PTE6)) {
 		/* DVI */
@@ -1056,6 +1193,7 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTB6, NULL);
 	gpio_direction_output(GPIO_PTB6, 0);
 
+#if !defined(CONFIG_MMC_SH_MMCIF)
 	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
 	gpio_request(GPIO_FN_SDHI1CD,  NULL);
 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
@@ -1069,7 +1207,8 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTB7, 0);
 
 	/* I/O buffer drive ability is high for SDHI1 */
-	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif /* CONFIG_MMC_SH_MMCIF */
 #else
 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1107,13 +1246,22 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
 	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
 
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (clk) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
 	/* change parent of FSI B */
 	clk = clk_get(NULL, "fsib_clk");
-	clk_register(&fsimckb_clk);
-	clk_set_parent(clk, &fsimckb_clk);
-	clk_set_rate(clk, 11000);
-	clk_set_rate(&fsimckb_clk, 11000);
-	clk_put(clk);
+	if (clk) {
+		clk_register(&fsimckb_clk);
+		clk_set_parent(clk, &fsimckb_clk);
+		clk_set_rate(clk, 11000);
+		clk_set_rate(&fsimckb_clk, 11000);
+		clk_put(clk);
+	}
 
 	gpio_request(GPIO_PTU0, NULL);
 	gpio_direction_output(GPIO_PTU0, 0);
@@ -1123,6 +1271,38 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
 	gpio_direction_input(GPIO_FN_INTC_IRQ1);
 
+	/* set VPU clock to 166 MHz */
+	clk = clk_get(NULL, "vpu_clk");
+	if (clk) {
+		clk_set_rate(clk, clk_round_rate(clk, 166000000));
+		clk_put(clk);
+	}
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+	gpio_request(GPIO_PTU5, NULL);
+	gpio_direction_output(GPIO_PTU5, 0);
+
+#if defined(CONFIG_MMC_SH_MMCIF)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* I/O buffer drive ability is high for MMCIF */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+#endif
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
@@ -1130,6 +1310,38 @@ static int __init arch_setup(void)
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
 
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	/* AK8813 power / reset sequence */
+	gpio_request(GPIO_PTG4, NULL);
+	gpio_request(GPIO_PTU3, NULL);
+	/* Reset */
+	gpio_direction_output(GPIO_PTG4, 0);
+	/* Power down */
+	gpio_direction_output(GPIO_PTU3, 1);
+
+	udelay(10);
+
+	/* Power up, reset */
+	gpio_set_value(GPIO_PTU3, 0);
+
+	udelay(10);
+
+	/* Remove reset */
+	gpio_set_value(GPIO_PTG4, 1);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index 83c28bc..9893fd3 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -64,7 +64,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
 
 unsigned char * __init highlander_plat_irq_setup(void)
 {
-	if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
+	if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
 		printk(KERN_INFO "Using r7780mp interrupt controller.\n");
 		register_intc_controller(&intc_desc);
 		return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index b721e86..0805b21 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -57,7 +57,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
 
 unsigned char * __init highlander_plat_irq_setup(void)
 {
-	if (ctrl_inw(0xa5000600)) {
+	if (__raw_readw(0xa5000600)) {
 		printk(KERN_INFO "Using r7780rp interrupt controller.\n");
 		register_intc_controller(&intc_desc);
 		return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 3811b06..558b248 100644
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
 
 unsigned char * __init highlander_plat_irq_setup(void)
 {
-	if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
+	if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
 		return NULL;
 
 	printk(KERN_INFO "Using r7785rp interrupt controller.\n");
 
-	ctrl_outw(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
+	__raw_writew(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
 
 	/* Setup the FPGA IRL */
-	ctrl_outw(0x0000, PA_IRLPRA);	/* FPGA IRLA */
-	ctrl_outw(0xe598, PA_IRLPRB);	/* FPGA IRLB */
-	ctrl_outw(0x7060, PA_IRLPRC);	/* FPGA IRLC */
-	ctrl_outw(0x0000, PA_IRLPRD);	/* FPGA IRLD */
-	ctrl_outw(0x4321, PA_IRLPRE);	/* FPGA IRLE */
-	ctrl_outw(0xdcba, PA_IRLPRF);	/* FPGA IRLF */
+	__raw_writew(0x0000, PA_IRLPRA);	/* FPGA IRLA */
+	__raw_writew(0xe598, PA_IRLPRB);	/* FPGA IRLB */
+	__raw_writew(0x7060, PA_IRLPRC);	/* FPGA IRLC */
+	__raw_writew(0x0000, PA_IRLPRD);	/* FPGA IRLD */
+	__raw_writew(0x4321, PA_IRLPRE);	/* FPGA IRLE */
+	__raw_writew(0xdcba, PA_IRLPRF);	/* FPGA IRLF */
 
 	register_intc_controller(&intc_desc);
 	return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
index 37b1a2e..5227863 100644
--- a/arch/sh/boards/mach-highlander/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -24,7 +24,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
 	unsigned int l, mask;
 	int ret = 0;
 
-	l = ctrl_inw(PA_DBSW);
+	l = __raw_readw(PA_DBSW);
 
 	/* Nothing to do if there's no state change */
 	if (psw->state) {
@@ -45,7 +45,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
 out:
 	/* Clear the switch IRQs */
 	l |= (0x7 << 12);
-	ctrl_outw(l, PA_DBSW);
+	__raw_writew(l, PA_DBSW);
 
 	return IRQ_RETVAL(ret);
 }
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index f663c14..a5ecfba 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -14,6 +14,7 @@
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/types.h>
@@ -26,6 +27,7 @@
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
@@ -311,13 +313,13 @@ device_initcall(r7780rp_devices_setup);
  */
 static int ivdr_clk_enable(struct clk *clk)
 {
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+	__raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
 	return 0;
 }
 
 static void ivdr_clk_disable(struct clk *clk)
 {
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
+	__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
 }
 
 static struct clk_ops ivdr_clk_ops = {
@@ -326,7 +328,6 @@ static struct clk_ops ivdr_clk_ops = {
 };
 
 static struct clk ivdr_clk = {
-	.name		= "ivdr_clk",
 	.ops		= &ivdr_clk_ops,
 };
 
@@ -334,10 +335,17 @@ static struct clk *r7780rp_clocks[] = {
 	&ivdr_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
+};
+
 static void r7780rp_power_off(void)
 {
 	if (mach_is_r7780mp() || mach_is_r7785rp())
-		ctrl_outw(0x0001, PA_POFF);
+		__raw_writew(0x0001, PA_POFF);
 }
 
 /*
@@ -345,7 +353,7 @@ static void r7780rp_power_off(void)
  */
 static void __init highlander_setup(char **cmdline_p)
 {
-	u16 ver = ctrl_inw(PA_VERREG);
+	u16 ver = __raw_readw(PA_VERREG);
 	int i;
 
 	printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
@@ -370,12 +378,14 @@ static void __init highlander_setup(char **cmdline_p)
 		clk_enable(clk);
 	}
 
-	ctrl_outw(0x0000, PA_OBLED);	/* Clear LED. */
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	__raw_writew(0x0000, PA_OBLED);	/* Clear LED. */
 
 	if (mach_is_r7780rp())
-		ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
+		__raw_writew(0x0001, PA_SDPOW);	/* SD Power ON */
 
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
+	__raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
 
 	pm_power_off = r7780rp_power_off;
 }
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index e85212f..b49535c 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -53,7 +53,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info)
 	info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
 			 APM_AC_ONLINE : APM_AC_OFFLINE;
 
-	pgdr = ctrl_inb(PGDR);
+	pgdr = __raw_readb(PGDR);
 	if (pgdr & PGDR_MAIN_BATTERY_OUT) {
 		info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
 		info->battery_flag	= 0x80;
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d936c1a..4499a37 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -53,17 +53,17 @@ static void pm_enter(void)
 	sh_wdt_write_cnt(0);
 
 	/* disable PLL1 */
-	frqcr = ctrl_inw(FRQCR);
+	frqcr = __raw_readw(FRQCR);
 	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
-	ctrl_outw(frqcr, FRQCR);
+	__raw_writew(frqcr, FRQCR);
 
 	/* enable standby */
-	stbcr = ctrl_inb(STBCR);
-	ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
 
 	/* set self-refresh */
-	mcr = ctrl_inw(MCR);
-	ctrl_outw(mcr & ~MCR_RFSH, MCR);
+	mcr = __raw_readw(MCR);
+	__raw_writew(mcr & ~MCR_RFSH, MCR);
 
 	/* set interrupt handler */
 	asm volatile("stc vbr, %0" : "=r" (vbr_old));
@@ -73,8 +73,8 @@ static void pm_enter(void)
 	       &wakeup_start, &wakeup_end - &wakeup_start);
 	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
 
-	ctrl_outw(0, RTCNT);
-	ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+	__raw_writew(0, RTCNT);
+	__raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
 
 	cpu_sleep();
 
@@ -83,14 +83,14 @@ static void pm_enter(void)
 	free_page(vbr_new);
 
 	/* enable PLL1 */
-	frqcr = ctrl_inw(FRQCR);
+	frqcr = __raw_readw(FRQCR);
 	frqcr |= FRQCR_PSTBY;
-	ctrl_outw(frqcr, FRQCR);
+	__raw_writew(frqcr, FRQCR);
 	udelay(50);
 	frqcr |= FRQCR_PLLEN;
-	ctrl_outw(frqcr, FRQCR);
+	__raw_writew(frqcr, FRQCR);
 
-	ctrl_outb(stbcr, STBCR);
+	__raw_writeb(stbcr, STBCR);
 
 	clear_bl_bit();
 }
@@ -115,21 +115,21 @@ static int hp6x0_pm_enter(suspend_state_t state)
 	outw(hd64461_stbcr, HD64461_STBCR);
 #endif
 
-	ctrl_outb(0x1f, DACR);
+	__raw_writeb(0x1f, DACR);
 
-	stbcr = ctrl_inb(STBCR);
-	ctrl_outb(0x01, STBCR);
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(0x01, STBCR);
 
-	stbcr2 = ctrl_inb(STBCR2);
-	ctrl_outb(0x7f , STBCR2);
+	stbcr2 = __raw_readb(STBCR2);
+	__raw_writeb(0x7f , STBCR2);
 
 	outw(0xf07f, HD64461_SCPUCR);
 
 	pm_enter();
 
 	outw(0, HD64461_SCPUCR);
-	ctrl_outb(stbcr, STBCR);
-	ctrl_outb(stbcr2, STBCR2);
+	__raw_writeb(stbcr, STBCR);
+	__raw_writeb(stbcr2, STBCR2);
 
 #ifdef CONFIG_HD64461_ENABLER
 	hd64461_stbcr = inw(HD64461_STBCR);
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index e6dd5e9..8c9add5 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -149,19 +149,19 @@ static void __init hp6xx_setup(char **cmdline_p)
 
 	sh_dac_output(0, DAC_SPEAKER_VOLUME);
 	sh_dac_disable(DAC_SPEAKER_VOLUME);
-	v8 = ctrl_inb(DACR);
+	v8 = __raw_readb(DACR);
 	v8 &= ~DACR_DAE;
-	ctrl_outb(v8,DACR);
+	__raw_writeb(v8,DACR);
 
-	v8 = ctrl_inb(SCPDR);
+	v8 = __raw_readb(SCPDR);
 	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
 	v8 &= ~SCPDR_TS_SCAN_ENABLE;
-	ctrl_outb(v8, SCPDR);
+	__raw_writeb(v8, SCPDR);
 
-	v = ctrl_inw(SCPCR);
+	v = __raw_readw(SCPCR);
 	v &= ~SCPCR_TS_MASK;
 	v |= SCPCR_TS_ENABLE;
-	ctrl_outw(v, SCPCR);
+	__raw_writew(v, SCPCR);
 }
 device_initcall(hp6xx_devices_setup);
 
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5d7b5d9..68994a1 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -10,6 +10,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/onenand.h>
 #include <linux/delay.h>
@@ -282,7 +284,7 @@ static int camera_power(struct device *dev, int mode)
 		 * use 1.8 V for VccQ_VIO
 		 * use 2.85V for VccQ_SR
 		 */
-		ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+		__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
 
 		/* reset clear */
 		ret = gpio_request(GPIO_PTB4, NULL);
@@ -351,15 +353,24 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 101,
+		.start  = 100,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
+static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+};
+
 static struct platform_device kfr2r09_sh_sdhi0_device = {
 	.name           = "sh_mobile_sdhi",
 	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
 	.resource       = kfr2r09_sh_sdhi0_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI0,
 	},
@@ -492,13 +503,13 @@ static int kfr2r09_usb0_gadget_setup(void)
 	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
 		return -ENODEV; /* unable to configure using i2c */
 
-	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
 	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
 	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
 	msleep(20); /* wait 20ms to let the clock settle */
 	clk_enable(clk_get(NULL, "usb0"));
-	ctrl_outw(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa40501d4);
 
 	return 0;
 }
@@ -526,12 +537,12 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
 
 	/* setup NOR flash at CS0 */
-	ctrl_outl(0x36db0400, BSC_CS0BCR);
-	ctrl_outl(0x00000500, BSC_CS0WCR);
+	__raw_writel(0x36db0400, BSC_CS0BCR);
+	__raw_writel(0x00000500, BSC_CS0WCR);
 
 	/* setup NAND flash at CS4 */
-	ctrl_outl(0x36db0400, BSC_CS4BCR);
-	ctrl_outl(0x00000500, BSC_CS4WCR);
+	__raw_writel(0x36db0400, BSC_CS4BCR);
+	__raw_writel(0x00000500, BSC_CS4WCR);
 
 	/* setup KEYSC pins */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 5280131..01e6abb 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -76,39 +76,39 @@ static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		break;
 
 	case GIODRV_IOCSGIODATA1:	/* write byte */
-		ctrl_outb((unsigned char)(0x0ff & data), addr);
+		__raw_writeb((unsigned char)(0x0ff & data), addr);
 		break;
 
 	case GIODRV_IOCSGIODATA2:	/* write word */
 		if (addr & 0x01) {
 			return -EFAULT;
 		}
-		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+		__raw_writew((unsigned short int)(0x0ffff & data), addr);
 		break;
 
 	case GIODRV_IOCSGIODATA4:	/* write long */
 		if (addr & 0x03) {
 			return -EFAULT;
 		}
-		ctrl_outl(data, addr);
+		__raw_writel(data, addr);
 		break;
 
 	case GIODRV_IOCGGIODATA1:	/* read byte */
-		data = ctrl_inb(addr);
+		data = __raw_readb(addr);
 		break;
 
 	case GIODRV_IOCGGIODATA2:	/* read word */
 		if (addr & 0x01) {
 			return -EFAULT;
 		}
-		data = ctrl_inw(addr);
+		data = __raw_readw(addr);
 		break;
 
 	case GIODRV_IOCGGIODATA4:	/* read long */
 		if (addr & 0x03) {
 			return -EFAULT;
 		}
-		data = ctrl_inl(addr);
+		data = __raw_readl(addr);
 		break;
 	default:
 		return -EFAULT;
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 7b284cd..96f38a4 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -22,14 +22,14 @@ static void disable_landisk_irq(unsigned int irq)
 {
 	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
 
-	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+	__raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
 }
 
 static void enable_landisk_irq(unsigned int irq)
 {
 	unsigned char value = (0x01 << (irq - 5));
 
-	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+	__raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
 }
 
 static struct irq_chip landisk_irq_chip __read_mostly = {
@@ -52,5 +52,5 @@ void __init init_landisk_IRQ(void)
 					      handle_level_irq, "level");
 		enable_landisk_irq(i);
 	}
-	ctrl_outb(0x00, PA_PWRINT_CLR);
+	__raw_writeb(0x00, PA_PWRINT_CLR);
 }
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
index e6b0efa..bef8352 100644
--- a/arch/sh/boards/mach-landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -25,7 +25,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
 	unsigned int sw_value;
 	int ret = 0;
 
-	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+	sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
 
 	/* Nothing to do if there's no state change */
 	if (psw->state) {
@@ -42,7 +42,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
 
 out:
 	/* Clear the switch IRQs */
-	ctrl_outb(0x00, PA_PWRINT_CLR);
+	__raw_writeb(0x00, PA_PWRINT_CLR);
 
 	return IRQ_RETVAL(ret);
 }
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index db22ea2..50337acc 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -25,7 +25,7 @@ void init_landisk_IRQ(void);
 
 static void landisk_power_off(void)
 {
-        ctrl_outb(0x01, PA_SHUTDOWN);
+        __raw_writeb(0x01, PA_SHUTDOWN);
 }
 
 static struct resource cf_ide_resources[3];
@@ -63,7 +63,7 @@ static int __init landisk_devices_setup(void)
 	/* open I/O area window */
 	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
 	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
 	if (!cf_ide_base) {
 		printk("allocate_cf_area : can't open CF I/O window!\n");
 		return -ENOMEM;
@@ -88,7 +88,7 @@ __initcall(landisk_devices_setup);
 static void __init landisk_setup(char **cmdline_p)
 {
         /* LED ON */
-	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
 
 	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
 	pm_power_off = landisk_power_off;
diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index 2b0b581..79b4e0d7 100644
--- a/arch/sh/boards/mach-lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
@@ -56,8 +56,8 @@ static int __init lboxre2_devices_setup(void)
 	/* open I/O area window */
 	paddrbase = virt_to_phys((void*)PA_AREA5_IO);
 	psize = PAGE_SIZE;
-	prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16);
-	cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
 	if (!cf0_io_base) {
 		printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
 		return -ENOMEM;
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 52dd748..2960c65 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -141,10 +141,10 @@ static inline void delay(void)
 #if defined(CONFIG_PCI)
 	/* System board present, just make a dummy SRAM access.  (CS0 will be
 	   mapped to PCI memory, probably good to avoid it.) */
-	ctrl_inw(0xa6800000);
+	__raw_readw(0xa6800000);
 #else
 	/* CS0 will be mapped to flash, ROM etc so safe to access it. */
-	ctrl_inw(0xa0000000);
+	__raw_readw(0xa0000000);
 #endif
 }
 
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index b551963..a26d166 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -88,7 +88,7 @@ static void disable_microdev_irq(unsigned int irq)
 	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
 
 	/* disable interrupts on the FPGA INTC register */
-	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
 }
 
 static void enable_microdev_irq(unsigned int irq)
@@ -107,13 +107,13 @@ static void enable_microdev_irq(unsigned int irq)
 	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
 
 	/* set priority for the interrupt */
-	priorities = ctrl_inl(priorityReg);
+	priorities = __raw_readl(priorityReg);
 	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
 	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
-	ctrl_outl(priorities, priorityReg);
+	__raw_writel(priorities, priorityReg);
 
 	/* enable interrupts on the FPGA INTC register */
-	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
 }
 
 /* This function sets the desired irq handler to be a MicroDev type */
@@ -134,7 +134,7 @@ extern void __init init_microdev_irq(void)
 	int i;
 
 	/* disable interrupts on the FPGA INTC register */
-	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
+	__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
 
 	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
 		make_microdev_irq(i);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 507c77b..662debe 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
@@ -180,7 +181,7 @@ static int migor_nand_flash_ready(struct mtd_info *mtd)
 	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
 }
 
-struct platform_nand_data migor_nand_flash_data = {
+static struct platform_nand_data migor_nand_flash_data = {
 	.chip = {
 		.nr_chips = 1,
 		.partitions = migor_nand_flash_partitions,
@@ -397,15 +398,23 @@ static struct resource sdhi_cn9_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 101,
+		.start	= 100,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
+static struct sh_mobile_sdhi_info sh7724_sdhi_data = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+};
+
 static struct platform_device sdhi_cn9_device = {
 	.name		= "sh_mobile_sdhi",
 	.num_resources	= ARRAY_SIZE(sdhi_cn9_resources),
 	.resource	= sdhi_cn9_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI,
 	},
@@ -419,6 +428,9 @@ static struct i2c_board_info migor_i2c_devices[] = {
 		I2C_BOARD_INFO("migor_ts", 0x51),
 		.irq = 38, /* IRQ6 */
 	},
+	{
+		I2C_BOARD_INFO("wm8978", 0x1a),
+	},
 };
 
 static struct i2c_board_info migor_i2c_camera[] = {
@@ -431,7 +443,7 @@ static struct i2c_board_info migor_i2c_camera[] = {
 };
 
 static struct ov772x_camera_info ov7725_info = {
-	.buswidth	= SOCAM_DATAWIDTH_8,
+	.flags		= OV772X_FLAG_8BIT,
 };
 
 static struct soc_camera_link ov7725_link = {
@@ -496,28 +508,16 @@ static int __init migor_devices_setup(void)
 					&migor_sdram_enter_end,
 					&migor_sdram_leave_start,
 					&migor_sdram_leave_end);
-#ifdef CONFIG_PM
 	/* Let D11 LED show STATUS0 */
 	gpio_request(GPIO_FN_STATUS0, NULL);
 
 	/* Lit D12 LED show PDSTATUS */
 	gpio_request(GPIO_FN_PDSTATUS, NULL);
-#else
-	/* Lit D11 LED */
-	gpio_request(GPIO_PTJ7, NULL);
-	gpio_direction_output(GPIO_PTJ7, 1);
-	gpio_export(GPIO_PTJ7, 0);
-
-	/* Lit D12 LED */
-	gpio_request(GPIO_PTJ5, NULL);
-	gpio_direction_output(GPIO_PTJ5, 1);
-	gpio_export(GPIO_PTJ5, 0);
-#endif
 
 	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
 	gpio_request(GPIO_FN_IRQ0, NULL);
-	ctrl_outl(0x00003400, BSC_CS4BCR);
-	ctrl_outl(0x00110080, BSC_CS4WCR);
+	__raw_writel(0x00003400, BSC_CS4BCR);
+	__raw_writel(0x00110080, BSC_CS4WCR);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
@@ -533,7 +533,7 @@ static int __init migor_devices_setup(void)
 
 	/* NAND Flash */
 	gpio_request(GPIO_FN_CS6A_CE2B, NULL);
-	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+	__raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
 	gpio_request(GPIO_PTA1, NULL);
 	gpio_direction_input(GPIO_PTA1);
 
@@ -627,10 +627,23 @@ static int __init migor_devices_setup(void)
 #else
 	gpio_direction_output(GPIO_PTT0, 1);
 #endif
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+	__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
 
 	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
 
+	/* SIU: Port B */
+	gpio_request(GPIO_FN_SIUBOLR, NULL);
+	gpio_request(GPIO_FN_SIUBOBT, NULL);
+	gpio_request(GPIO_FN_SIUBISLD, NULL);
+	gpio_request(GPIO_FN_SIUBOSLD, NULL);
+	gpio_request(GPIO_FN_SIUMCKB, NULL);
+
+	/*
+	 * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
+	 * output. Need only SIUB, set to output for master mode (table 34.2)
+	 */
+	__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
+
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
 
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 78d7b27..574f009 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -129,7 +129,7 @@ void __init init_rts7751r2d_IRQ(void)
 {
 	struct intc_desc *d;
 
-	switch (ctrl_inw(PA_VERREG) & 0xf0) {
+	switch (__raw_readw(PA_VERREG) & 0xf0) {
 #ifdef CONFIG_RTS7751R2D_PLUS
 	case 0x10:
 		printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
@@ -147,7 +147,7 @@ void __init init_rts7751r2d_IRQ(void)
 #endif
 	default:
 		printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
-		       ctrl_inw(PA_VERREG));
+		       __raw_readw(PA_VERREG));
 		return;
 	}
 
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index a625ecb..b84df6a 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -70,7 +70,7 @@ static struct spi_board_info spi_bus[] = {
 static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
 {
 	BUG_ON(cs != 0);  /* Single Epson RTC-9701JE attached on CS0 */
-	ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+	__raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
 }
 
 static struct sh_spi_info spi_info = {
@@ -262,7 +262,7 @@ __initcall(rts7751r2d_devices_setup);
 
 static void rts7751r2d_power_off(void)
 {
-	ctrl_outw(0x0001, PA_POWOFF);
+	__raw_writew(0x0001, PA_POWOFF);
 }
 
 /*
@@ -271,14 +271,14 @@ static void rts7751r2d_power_off(void)
 static void __init rts7751r2d_setup(char **cmdline_p)
 {
 	void __iomem *sm501_reg;
-	u16 ver = ctrl_inw(PA_VERREG);
+	u16 ver = __raw_readw(PA_VERREG);
 
 	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
 
 	printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
 					(ver >> 4) & 0xf, ver & 0xf);
 
-	ctrl_outw(0x0000, PA_OUTPORT);
+	__raw_writew(0x0000, PA_OUTPORT);
 	pm_power_off = rts7751r2d_power_off;
 
 	/* sm501 dram configuration:
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index c37617e..4fa08ba 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -96,7 +96,7 @@ static int __init rsk7203_devices_setup(void)
 	gpio_request(GPIO_FN_RXD0, NULL);
 
 	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
-	ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+	__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
 	gpio_request(GPIO_FN_IRQ0_PB, NULL);
 
 	return platform_add_devices(rsk7203_devices,
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 8555581..e5f7564 100644
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -37,9 +37,9 @@ void __init init_sdk7780_IRQ(void)
 {
 	printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
 
-	ctrl_outw(0xFFFF, FPGA_IRQ0MR);
+	__raw_writew(0xFFFF, FPGA_IRQ0MR);
 	/* Setup IRL 0-3 */
-	ctrl_outw(0x0003, FPGA_IMSR);
+	__raw_writew(0x0003, FPGA_IMSR);
 	plat_irq_setup_pins(IRQ_MODE_IRL3210);
 
 	register_intc_controller(&fpga_intc_desc);
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index aad94a7..4da38db 100644
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -20,27 +20,18 @@
 
 #define GPIO_PECR        0xFFEA0008
 
-//* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
 };
 
 /* SMC91x */
@@ -83,8 +74,8 @@ device_initcall(sdk7780_devices_setup);
 
 static void __init sdk7780_setup(char **cmdline_p)
 {
-	u16 ver = ctrl_inw(FPGA_FPVERR);
-	u16 dateStamp = ctrl_inw(FPGA_FPDATER);
+	u16 ver = __raw_readw(FPGA_FPVERR);
+	u16 dateStamp = __raw_readw(FPGA_FPDATER);
 
 	printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
 	printk(KERN_INFO "Board version: %d (revision %d), "
@@ -94,7 +85,7 @@ static void __init sdk7780_setup(char **cmdline_p)
 			 dateStamp);
 
 	/* Setup pin mux'ing for PCIC */
-	ctrl_outw(0x0000, GPIO_PECR);
+	__raw_writew(0x0000, GPIO_PECR);
 }
 
 /*
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
new file mode 100644
index 0000000..a29f19e
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -0,0 +1 @@
+obj-y	:= setup.o fpga.o irq.o
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
new file mode 100644
index 0000000..3e4ec66
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/fpga.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <mach/fpga.h>
+#include <asm/sizes.h>
+
+#define FPGA_REGS_OFFSET	0x03fff800
+#define FPGA_REGS_SIZE		0x490
+
+/*
+ * The FPGA can be mapped in any of the generally available areas,
+ * so we attempt to scan for it using the fixed SRSTR read magic.
+ *
+ * Once the FPGA is located, the rest of the mapping data for the other
+ * components can be determined dynamically from its section mapping
+ * registers.
+ */
+static void __iomem *sdk7786_fpga_probe(void)
+{
+	unsigned long area;
+	void __iomem *base;
+
+	/*
+	 * Iterate over all of the areas where the FPGA could be mapped.
+	 * The possible range is anywhere from area 0 through 6, area 7
+	 * is reserved.
+	 */
+	for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
+		base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+		if (!base) {
+			/* Failed to remap this area, move along. */
+			continue;
+		}
+
+		if (ioread16(base + SRSTR) == SRSTR_MAGIC)
+			return base;	/* Found it! */
+
+		iounmap(base);
+	}
+
+	return NULL;
+}
+
+void __iomem *sdk7786_fpga_base;
+
+void __init sdk7786_fpga_init(void)
+{
+	u16 version, date;
+
+	sdk7786_fpga_base = sdk7786_fpga_probe();
+	if (unlikely(!sdk7786_fpga_base)) {
+		panic("FPGA detection failed.\n");
+		return;
+	}
+
+	version = fpga_read_reg(FPGAVR);
+	date = fpga_read_reg(FPGADR);
+
+	pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
+		bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
+		((date >> 12) & 0xf) + 2000,
+		(date >> 8) & 0xf, bcd2bin(date & 0xff));
+}
diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c
new file mode 100644
index 0000000..46943a0
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/irq.c
@@ -0,0 +1,48 @@
+/*
+ * SDK7786 FPGA IRQ Controller Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+
+enum {
+	ATA_IRQ_BIT		= 1,
+	SPI_BUSY_BIT		= 2,
+	LIRQ5_BIT		= 3,
+	LIRQ6_BIT		= 4,
+	LIRQ7_BIT		= 5,
+	LIRQ8_BIT		= 6,
+	KEY_IRQ_BIT		= 7,
+	PEN_IRQ_BIT		= 8,
+	ETH_IRQ_BIT		= 9,
+	RTC_ALARM_BIT		= 10,
+	CRYSTAL_FAIL_BIT	= 12,
+	ETH_PME_BIT		= 14,
+};
+
+void __init sdk7786_init_irq(void)
+{
+	unsigned int tmp;
+
+	/* Enable priority encoding for all IRLs */
+	fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
+
+	/* Clear FPGA interrupt status registers */
+	fpga_write_reg(0x0000, INTASR);
+	fpga_write_reg(0x0000, INTBSR);
+
+	/* Unmask FPGA interrupts */
+	tmp = fpga_read_reg(INTAMR);
+	tmp &= ~(1 << ETH_IRQ_BIT);
+	fpga_write_reg(tmp, INTAMR);
+
+	plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
new file mode 100644
index 0000000..2ec1ea5
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -0,0 +1,206 @@
+/*
+ * Renesas Technology Europe SDK7786 Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resource = {
+	.start		= 0x07fff8b0,
+	.end		= 0x07fff8b0 + sizeof(u16) - 1,
+	.flags		= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0x07ffff00,
+		.end		= 0x07ffff00 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x2c0),
+		.end		= evt2irq(0x2c0),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct resource smbus_fpga_resource = {
+	.start		= 0x07fff9e0,
+	.end		= 0x07fff9e0 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_fpga_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &smbus_fpga_resource,
+};
+
+static struct resource smbus_pcie_resource = {
+	.start		= 0x07fffc30,
+	.end		= 0x07fffc30 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_pcie_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= &smbus_pcie_resource,
+};
+
+static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("max6900", 0x68),
+	},
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+	&heartbeat_device,
+	&smsc911x_device,
+	&smbus_fpga_device,
+	&smbus_pcie_device,
+};
+
+static int sdk7786_i2c_setup(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Hand over I2C control to the FPGA.
+	 */
+	tmp = fpga_read_reg(SBCR);
+	tmp &= ~SCBR_I2CCEN;
+	tmp |= SCBR_I2CMEN;
+	fpga_write_reg(tmp, SBCR);
+
+	return i2c_register_board_info(0, sdk7786_i2c_devices,
+				       ARRAY_SIZE(sdk7786_i2c_devices));
+}
+
+static int __init sdk7786_devices_setup(void)
+{
+	int ret;
+
+	ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return sdk7786_i2c_setup();
+}
+__initcall(sdk7786_devices_setup);
+
+static int sdk7786_mode_pins(void)
+{
+	return fpga_read_reg(MODSWR);
+}
+
+static int sdk7786_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
+static void sdk7786_restart(char *cmd)
+{
+	fpga_write_reg(0xa5a5, SRSTR);
+}
+
+static void sdk7786_power_off(void)
+{
+	fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
+
+	/*
+	 * It can take up to 20us for the R8C to do its job, back off and
+	 * wait a bit until we've been shut off. Even though newer FPGA
+	 * versions don't set the ACK bit, the latency issue remains.
+	 */
+	while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
+		cpu_sleep();
+}
+
+/* Initialize the board */
+static void __init sdk7786_setup(char **cmdline_p)
+{
+	pr_info("Renesas Technology Europe SDK7786 support:\n");
+
+	sdk7786_fpga_init();
+
+	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
+
+	machine_ops.restart = sdk7786_restart;
+	pm_power_off = sdk7786_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sdk7786 __initmv = {
+	.mv_name		= "SDK7786",
+	.mv_setup		= sdk7786_setup,
+	.mv_mode_pins		= sdk7786_mode_pins,
+	.mv_clk_init		= sdk7786_clk_init,
+	.mv_init_irq		= sdk7786_init_irq,
+};
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 1804556..adadc77 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -16,7 +16,7 @@
 
 static inline void delay(void)
 {
-	ctrl_inw(0x20000000);  /* P2 ROM Area */
+	__raw_readw(0x20000000);  /* P2 ROM Area */
 }
 
 /* MS7750 requires special versions of in*, out* routines, since
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index aef7f05..8d82175 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq)
 	unsigned short msk0,msk1;
 
 	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(INTC_IPR01);
+	val = __raw_readw(INTC_IPR01);
 	val &= mask;
-	ctrl_outw(val, INTC_IPR01);
+	__raw_writew(val, INTC_IPR01);
 	/* FPGA mask set */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
 
 	switch (irq) {
 	case IRQ0_IRQ:
@@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq)
 		msk1 |= 0x00ff;
 		break;
 	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
 }
 
 static void enable_se7206_irq(unsigned int irq)
@@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq)
 	unsigned short msk0,msk1;
 
 	/* Set priority in IPR back to original value */
-	val = ctrl_inw(INTC_IPR01);
+	val = __raw_readw(INTC_IPR01);
 	val |= value;
-	ctrl_outw(val, INTC_IPR01);
+	__raw_writew(val, INTC_IPR01);
 
 	/* FPGA mask reset */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
 
 	switch (irq) {
 	case IRQ0_IRQ:
@@ -82,19 +82,20 @@ static void enable_se7206_irq(unsigned int irq)
 		msk1 &= ~0x00ff;
 		break;
 	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
 }
 
 static void eoi_se7206_irq(unsigned int irq)
 {
 	unsigned short sts0,sts1;
+	struct irq_desc *desc = irq_to_desc(irq);
 
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+	if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		enable_se7206_irq(irq);
 	/* FPGA isr clear */
-	sts0 = ctrl_inw(INTSTS0);
-	sts1 = ctrl_inw(INTSTS1);
+	sts0 = __raw_readw(INTSTS0);
+	sts1 = __raw_readw(INTSTS1);
 
 	switch (irq) {
 	case IRQ0_IRQ:
@@ -108,8 +109,8 @@ static void eoi_se7206_irq(unsigned int irq)
 		sts1 &= ~0x00ff;
 		break;
 	}
-	ctrl_outw(sts0, INTSTS0);
-	ctrl_outw(sts1, INTSTS1);
+	__raw_writew(sts0, INTSTS0);
+	__raw_writew(sts1, INTSTS1);
 }
 
 static struct irq_chip se7206_irq_chip __read_mostly = {
@@ -136,11 +137,11 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+	__raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
 
 	/* FPGA System register setup*/
-	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
-	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
 	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
-	ctrl_outw(0x0001,INTSEL);
+	__raw_writew(0x0001,INTSEL);
 }
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index f5466384..8f5c65d 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -50,15 +50,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 32,
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -67,8 +64,8 @@ static struct platform_device heartbeat_device = {
 	.dev	= {
 		.platform_data	= &heartbeat_data,
 	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct platform_device *se7206_devices[] __initdata = {
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index 051c29d..d4305c2 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -16,16 +16,18 @@
 #include <linux/io.h>
 #include <mach-se/mach/se7343.h>
 
+unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+
 static void disable_se7343_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	__raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
 }
 
 static void enable_se7343_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
+	__raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
 }
 
 static struct irq_chip se7343_irq_chip __read_mostly = {
@@ -37,19 +39,16 @@ static struct irq_chip se7343_irq_chip __read_mostly = {
 
 static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned short intv = ctrl_inw(PA_CPLD_ST);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+	unsigned short intv = __raw_readw(PA_CPLD_ST);
+	unsigned int ext_irq = 0;
 
 	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
 
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(se7343_fpga_irq[ext_irq]);
 	}
 }
 
@@ -58,16 +57,24 @@ static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
  */
 void __init init_7343se_IRQ(void)
 {
-	int i;
+	int i, irq;
+
+	__raw_writew(0, PA_CPLD_IMSK);	/* disable all irqs */
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
 
-	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
-	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		irq = create_irq();
+		if (irq < 0)
+			return;
+		se7343_fpga_irq[i] = irq;
 
-	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+		set_irq_chip_and_handler_name(se7343_fpga_irq[i],
 					      &se7343_irq_chip,
 					      handle_level_irq, "level");
 
+		set_irq_chip_data(se7343_fpga_irq[i], (void *)i);
+	}
+
 	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
 	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
 	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 4de56f3..d2370af 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -11,26 +11,17 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct mtd_partition nor_flash_partitions[] = {
@@ -82,7 +73,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x16000000,
 		.regshift	= 1,
 		.flags		= ST16C2550C_FLAGS,
-		.irq		= UARTA_IRQ,
 		.uartclk	= 7372800,
 	},
 	[1] = {
@@ -90,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x17000000,
 		.regshift	= 1,
 		.flags		= ST16C2550C_FLAGS,
-		.irq		= UARTB_IRQ,
 		.uartclk	= 7372800,
 	},
 	{ },
@@ -121,7 +110,7 @@ static struct resource usb_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[2] = {
-		.start  = USB_IRQ,
+		/* Filled in later */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -138,8 +127,8 @@ static struct isp116x_platform_data usb_platform_data = {
 static struct platform_device usb_device = {
 	.name			= "isp116x-hcd",
 	.id			= -1,
-	.num_resources  	= ARRAY_SIZE(usb_resources),
-	.resource       	= usb_resources,
+	.num_resources		= ARRAY_SIZE(usb_resources),
+	.resource		= usb_resources,
 	.dev			= {
 		.platform_data	= &usb_platform_data,
 	},
@@ -155,6 +144,13 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = {
 
 static int __init sh7343se_devices_setup(void)
 {
+	/* Wire-up dynamic vectors */
+	serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
+	serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
+
+	usb_resources[2].start = usb_resources[2].end =
+		se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+
 	return platform_add_devices(sh7343se_platform_devices,
 				    ARRAY_SIZE(sh7343se_platform_devices));
 }
@@ -165,10 +161,10 @@ device_initcall(sh7343se_devices_setup);
  */
 static void __init sh7343se_setup(char **cmdline_p)
 {
-	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+	__raw_writew(0xf900, FPGA_OUT);	/* FPGA */
 
-	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
-	ctrl_outw(0x0020, PORT_PSELD);
+	__raw_writew(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	__raw_writew(0x0020, PORT_PSELD);
 
 	printk(KERN_INFO "MS7343CP01 Setup...done\n");
 }
@@ -179,6 +175,5 @@ static void __init sh7343se_setup(char **cmdline_p)
 static struct sh_machine_vector mv_7343se __initmv = {
 	.mv_name = "SolutionEngine 7343",
 	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR,
 	.mv_init_irq = init_7343se_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index ec1fea5..1028c17 100644
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = {
 void __init init_se_IRQ(void)
 {
 	/* Disable all interrupts */
-	ctrl_outw(0, BCR_ILCRA);
-	ctrl_outw(0, BCR_ILCRB);
-	ctrl_outw(0, BCR_ILCRC);
-	ctrl_outw(0, BCR_ILCRD);
-	ctrl_outw(0, BCR_ILCRE);
-	ctrl_outw(0, BCR_ILCRF);
-	ctrl_outw(0, BCR_ILCRG);
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
 
 	register_ipr_controller(&ipr_irq_desc);
 }
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 527eb6b..66d39d1 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -93,15 +93,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -110,8 +107,8 @@ static struct platform_device heartbeat_device = {
 	.dev	= {
 		.platform_data	= &heartbeat_data,
 	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index b417acc..d85022e 100644
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
 void __init init_se7721_IRQ(void)
 {
 	/* PPCR */
-	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+	__raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
 
 	register_intc_controller(&intc_desc);
 	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 55af4c3..7416ad7 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -23,15 +23,12 @@ static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 static struct heartbeat_data heartbeat_data = {
 	.bit_pos	= heartbeat_bit_pos,
 	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
@@ -40,8 +37,8 @@ static struct platform_device heartbeat_device = {
 	.dev	= {
 		.platform_data	= &heartbeat_data,
 	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct resource cf_ide_resources[] = {
@@ -83,10 +80,10 @@ device_initcall(se7721_devices_setup);
 static void __init se7721_setup(char **cmdline_p)
 {
 	/* for USB */
-	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
-	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
-	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
-	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+	__raw_writew(0x0000, 0xA405010C);	/* PGCR */
+	__raw_writew(0x0000, 0xA405010E);	/* PHCR */
+	__raw_writew(0x00AA, 0xA4050118);	/* PPCR */
+	__raw_writew(0x0000, 0xA4050124);	/* PSELA */
 }
 
 /*
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index b221b68..61605db 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
 static void disable_se7722_irq(unsigned int irq)
 {
 	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
-	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+	__raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
 }
 
 static void enable_se7722_irq(unsigned int irq)
 {
 	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
-	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+	__raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
 }
 
 static struct irq_chip se7722_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
 
 static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned short intv = ctrl_inw(IRQ01_STS);
+	unsigned short intv = __raw_readw(IRQ01_STS);
 	unsigned int ext_irq = 0;
 
 	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void)
 {
 	int i, irq;
 
-	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
-	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+	__raw_writew(0, IRQ01_MASK);       /* disable all irqs */
+	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
 
 	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
 		irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index b1cb942..80a4e57 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -25,26 +25,17 @@
 #include <cpu/sh7722.h>
 
 /* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
 };
 
 /* SMC91x */
@@ -165,32 +156,32 @@ device_initcall(se7722_devices_setup);
 
 static void __init se7722_setup(char **cmdline_p)
 {
-	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+	__raw_writew(0x010D, FPGA_OUT);    /* FPGA */
 
-	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
-	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+	__raw_writew(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	__raw_writew(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
 
 	/* LCDC I/O */
-	ctrl_outw(0x0020, PORT_PSELD);
+	__raw_writew(0x0020, PORT_PSELD);
 
 	/* SIOF1*/
-	ctrl_outw(0x0003, PORT_PSELB);
-	ctrl_outw(0xe000, PORT_PSELC);
-	ctrl_outw(0x0000, PORT_PKCR);
+	__raw_writew(0x0003, PORT_PSELB);
+	__raw_writew(0xe000, PORT_PSELC);
+	__raw_writew(0x0000, PORT_PKCR);
 
 	/* LCDC */
-	ctrl_outw(0x4020, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(0x0002, PORT_PRCR);
-	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+	__raw_writew(0x4020, PORT_PHCR);
+	__raw_writew(0x0000, PORT_PLCR);
+	__raw_writew(0x0000, PORT_PMCR);
+	__raw_writew(0x0002, PORT_PRCR);
+	__raw_writew(0x0000, PORT_PXCR);   /* LCDC,CS6A */
 
 	/* KEYSC */
-	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
-	ctrl_outw(0x0000, PORT_PYCR);
-	ctrl_outw(0x0000, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+	__raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	__raw_writew(0x0000, PORT_PYCR);
+	__raw_writew(0x0000, PORT_PZCR);
+	__raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	__raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
 }
 
 /*
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index f76cf3b..0942be2 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq)
 {
 	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
 	unsigned int bit = irq - set.base;
-	ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+	__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
 }
 
 static void enable_se7724_irq(unsigned int irq)
 {
 	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
 	unsigned int bit = irq - set.base;
-	ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+	__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
 }
 
 static struct irq_chip se7724_irq_chip __read_mostly = {
@@ -92,19 +92,16 @@ static struct irq_chip se7724_irq_chip __read_mostly = {
 static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	struct fpga_irq set = get_fpga_irq(irq);
-	unsigned short intv = ctrl_inw(set.sraddr);
-	struct irq_desc *ext_desc;
+	unsigned short intv = __raw_readw(set.sraddr);
 	unsigned int ext_irq = set.base;
 
 	intv &= set.mask;
 
-	while (intv) {
-		if (intv & 0x0001) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
 	}
 }
 
@@ -113,20 +110,39 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
  */
 void __init init_se7724_IRQ(void)
 {
-	int i;
-
-	ctrl_outw(0xffff, IRQ0_MR);  /* mask all */
-	ctrl_outw(0xffff, IRQ1_MR);  /* mask all */
-	ctrl_outw(0xffff, IRQ2_MR);  /* mask all */
-	ctrl_outw(0x0000, IRQ0_SR);  /* clear irq */
-	ctrl_outw(0x0000, IRQ1_SR);  /* clear irq */
-	ctrl_outw(0x0000, IRQ2_SR);  /* clear irq */
-	ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
-
-	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
+	int i, nid = cpu_to_node(boot_cpu_data);
+
+	__raw_writew(0xffff, IRQ0_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ1_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ2_MR);  /* mask all */
+	__raw_writew(0x0000, IRQ0_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ1_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ2_SR);  /* clear irq */
+	__raw_writew(0x002a, IRQ_MODE); /* set irq type */
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) {
+		int irq, wanted;
+
+		wanted = SE7724_FPGA_IRQ_BASE + i;
+
+		irq = create_irq_nr(wanted, nid);
+		if (unlikely(irq == 0)) {
+			pr_err("%s: failed hooking irq %d for FPGA\n",
+			       __func__, wanted);
+			return;
+		}
+
+		if (unlikely(irq != wanted)) {
+			pr_err("%s: got irq %d but wanted %d, bailing.\n",
+			       __func__, irq, wanted);
+			destroy_irq(irq);
+			return;
+		}
+
+		set_irq_chip_and_handler_name(irq,
 					      &se7724_irq_chip,
 					      handle_level_irq, "level");
+	}
 
 	set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
 	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
index 9040167..6fa4734 100644
--- a/arch/sh/boards/mach-se/7724/sdram.S
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -39,6 +39,10 @@ ENTRY(ms7724se_sdram_leave_start)
 
 	/* DBSC: put memory in auto-refresh mode */
 
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
 	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
 	WAIT 1
 	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
@@ -49,4 +53,79 @@ ENTRY(ms7724se_sdram_leave_start)
 	rts
 	 nop
 
+resume_rstandby:
+
+	/* CPG: setup clocks before restarting external memory */
+
+	ED 0xA4150024, 0x00004000 /* PLLCR */
+
+	mov.l	FRQCRA,r0
+	mov.l	@r0,r3
+	mov.l	KICK,r1
+	or	r1, r3
+	mov.l	r3, @r0
+
+	mov.l	LSTATS,r0
+	mov	#1,r1
+WAIT_LSTATS:
+	mov.l	@r0,r3
+	tst	r1,r3
+	bf	WAIT_LSTATS
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+FRQCRA:	.long	0xa4150000
+KICK:	.long	0x80000000
+LSTATS:	.long	0xa4150060
+
 ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 858ecb2..552ebd9 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/smc91x.h>
@@ -52,27 +53,25 @@
  * and change SW41 to use 720p
  */
 
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
+/*
+ * about sound
+ *
+ * This setup.c supports FSI slave mode.
+ * Please change J20, J21, J22 pin to 1-2 connection.
+ */
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
 };
 
 /* LAN91C111 */
@@ -265,12 +264,12 @@ static struct platform_device ceu1_device = {
 #define FCLKACR		0xa4150008
 static void fsimck_init(struct clk *clk)
 {
-	u32 status = ctrl_inl(clk->enable_reg);
+	u32 status = __raw_readl(clk->enable_reg);
 
 	/* use external clock */
 	status &= ~0x000000ff;
 	status |= 0x00000080;
-	ctrl_outl(status, clk->enable_reg);
+	__raw_writel(status, clk->enable_reg);
 }
 
 static struct clk_ops fsimck_clk_ops = {
@@ -278,14 +277,13 @@ static struct clk_ops fsimck_clk_ops = {
 };
 
 static struct clk fsimcka_clk = {
-	.name		= "fsimcka_clk",
-	.id		= -1,
 	.ops		= &fsimck_clk_ops,
 	.enable_reg	= (void __iomem *)FCLKACR,
 	.rate		= 0, /* unknown */
 };
 
-struct sh_fsi_platform_info fsi_info = {
+/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
+static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
@@ -322,7 +320,7 @@ static struct platform_device fsi_device = {
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
-	.scan_timing = 10,
+	.scan_timing = 3,
 	.delay = 50,
 	.keycodes = {
 		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
@@ -373,7 +371,7 @@ static struct resource sh_eth_resources[] = {
 	},
 };
 
-struct sh_eth_plat_data sh_eth_plat = {
+static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8187 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
 };
@@ -460,16 +458,24 @@ static struct resource sdhi0_cn7_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 101,
+		.start  = 100,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
+static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+};
+
 static struct platform_device sdhi0_cn7_device = {
 	.name           = "sh_mobile_sdhi",
 	.id		= 0,
 	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
 	.resource       = sdhi0_cn7_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI0,
 	},
@@ -483,21 +489,95 @@ static struct resource sdhi1_cn8_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 24,
+		.start  = 23,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
+static struct sh_mobile_sdhi_info sh7724_sdhi1_data = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+};
+
 static struct platform_device sdhi1_cn8_device = {
 	.name           = "sh_mobile_sdhi",
 	.id		= 1,
 	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
 	.resource       = sdhi1_cn8_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi1_data,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
 };
 
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 20,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/ak881x.h>
+#include <media/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	/* With open J18 jumper address is 0x21 */
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+	.module_name	= "ak881x",
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 55,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+	.archdata	= {
+		.hwblk_id	= HWBLK_VOU,
+	},
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -512,6 +592,8 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&fsi_device,
 	&sdhi0_cn7_device,
 	&sdhi1_cn8_device,
+	&irda_device,
+	&vou_device,
 };
 
 /* I2C device */
@@ -531,7 +613,7 @@ static int __init sh_eth_is_eeprom_ready(void)
 	int t = 10000;
 
 	while (t--) {
-		if (!ctrl_inw(EEPROM_STAT))
+		if (!__raw_readw(EEPROM_STAT))
 			return 1;
 		udelay(1);
 	}
@@ -551,13 +633,13 @@ static void __init sh_eth_init(void)
 
 	/* read MAC addr from EEPROM */
 	for (i = 0 ; i < 3 ; i++) {
-		ctrl_outw(0x0, EEPROM_OP); /* read */
-		ctrl_outw(i*2, EEPROM_ADR);
-		ctrl_outw(0x1, EEPROM_STRT);
+		__raw_writew(0x0, EEPROM_OP); /* read */
+		__raw_writew(i*2, EEPROM_ADR);
+		__raw_writew(0x1, EEPROM_STRT);
 		if (!sh_eth_is_eeprom_ready())
 			return;
 
-		mac = ctrl_inw(EEPROM_DATA);
+		mac = __raw_readw(EEPROM_DATA);
 		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
 		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
 	}
@@ -594,28 +676,42 @@ arch_initcall(arch_setup);
 
 static int __init devices_setup(void)
 {
-	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
-	struct clk *fsia_clk;
+	u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+	struct clk *clk;
+	u16 fpga_out;
 
 	/* register board specific self-refresh code */
-	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
 					&ms7724se_sdram_enter_start,
 					&ms7724se_sdram_enter_end,
 					&ms7724se_sdram_leave_start,
 					&ms7724se_sdram_leave_end);
 	/* Reset Release */
-	ctrl_outw(ctrl_inw(FPGA_OUT) &
-		  ~((1 << 1)  | /* LAN */
-		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 7)  | /* AK4643 */
-		    (1 << 12) | /* USB0 */
-		    (1 << 14)), /* RMII */
-		  FPGA_OUT);
+	fpga_out = __raw_readw(FPGA_OUT);
+	/* bit4: NTSC_PDN, bit5: NTSC_RESET */
+	fpga_out &= ~((1 << 1)  | /* LAN */
+		      (1 << 4)  | /* AK8813 PDN */
+		      (1 << 5)  | /* AK8813 RESET */
+		      (1 << 6)  | /* VIDEO DAC */
+		      (1 << 7)  | /* AK4643 */
+		      (1 << 8)  | /* IrDA */
+		      (1 << 12) | /* USB0 */
+		      (1 << 14)); /* RMII */
+	__raw_writew(fpga_out | (1 << 4), FPGA_OUT);
+
+	udelay(10);
+
+	/* AK8813 RESET */
+	__raw_writew(fpga_out | (1 << 5), FPGA_OUT);
+
+	udelay(10);
+
+	__raw_writew(fpga_out, FPGA_OUT);
 
 	/* turn on USB clocks, use external clock */
-	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
-#ifdef CONFIG_PM
 	/* Let LED9 show STATUS2 */
 	gpio_request(GPIO_FN_STATUS2, NULL);
 
@@ -624,28 +720,12 @@ static int __init devices_setup(void)
 
 	/* Lit LED11 show PDSTATUS */
 	gpio_request(GPIO_FN_PDSTATUS, NULL);
-#else
-	/* Lit LED9 */
-	gpio_request(GPIO_PTJ6, NULL);
-	gpio_direction_output(GPIO_PTJ6, 1);
-	gpio_export(GPIO_PTJ6, 0);
-
-	/* Lit LED10 */
-	gpio_request(GPIO_PTJ5, NULL);
-	gpio_direction_output(GPIO_PTJ5, 1);
-	gpio_export(GPIO_PTJ5, 0);
-
-	/* Lit LED11 */
-	gpio_request(GPIO_PTJ7, NULL);
-	gpio_direction_output(GPIO_PTJ7, 1);
-	gpio_export(GPIO_PTJ7, 0);
-#endif
 
 	/* enable USB0 port */
-	ctrl_outw(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa40501d4);
 
 	/* enable USB1 port */
-	ctrl_outw(0x0600, 0xa4050192);
+	__raw_writew(0x0600, 0xa4050192);
 
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -693,7 +773,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_LCDVCPWC, NULL);
 	gpio_request(GPIO_FN_LCDRD,    NULL);
 	gpio_request(GPIO_FN_LCDLCLK,  NULL);
-	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
 
 	/* enable CEU0 */
 	gpio_request(GPIO_FN_VIO0_D15, NULL);
@@ -764,13 +844,22 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
 	gpio_request(GPIO_FN_FSIIASD,    NULL);
 
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (clk) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
 	/* change parent of FSI A */
-	fsia_clk = clk_get(NULL, "fsia_clk");
-	clk_register(&fsimcka_clk);
-	clk_set_parent(fsia_clk, &fsimcka_clk);
-	clk_set_rate(fsia_clk, 11000);
-	clk_set_rate(&fsimcka_clk, 11000);
-	clk_put(fsia_clk);
+	clk = clk_get(NULL, "fsia_clk");
+	if (clk) {
+		clk_register(&fsimcka_clk);
+		clk_set_parent(clk, &fsimcka_clk);
+		clk_set_rate(clk, 11000);
+		clk_set_rate(&fsimcka_clk, 11000);
+		clk_put(clk);
+	}
 
 	/* SDHI0 connected to cn7 */
 	gpio_request(GPIO_FN_SDHI0CD, NULL);
@@ -792,6 +881,10 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_SDHI1CMD, NULL);
 	gpio_request(GPIO_FN_SDHI1CLK, NULL);
 
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+
 	/*
 	 * enable SH-Eth
 	 *
@@ -846,6 +939,20 @@ static int __init devices_setup(void)
 		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
 	}
 
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
 	return platform_add_devices(ms7724se_devices,
 				    ARRAY_SIZE(ms7724se_devices));
 }
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 121744c..d5c9edc 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -24,30 +24,30 @@
 void __init init_se7780_IRQ(void)
 {
 	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK1);
+	__raw_writew(0, FPGA_INTMSK1);
 	/* mask SM501 interrupt */
-	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	__raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
 	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK2);
+	__raw_writew(0, FPGA_INTMSK2);
 
 	/* set FPGA INTSEL register */
 	/* FPGA + 0x06 */
-	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+	__raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
 		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
 
 	/* FPGA + 0x08 */
-	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+	__raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
 		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
 		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
 		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
 
 	/* FPGA + 0x0A */
-	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+	__raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
 	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
 
 	/* ICR1: detect low level(for 2ndcut) */
-	ctrl_outl(0xAAAA0000, INTC_ICR1);
+	__raw_writel(0xAAAA0000, INTC_ICR1);
 
 	/*
 	 * FPGA PCISEL register initialize
@@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void)
 	 *  INTD || INTD  | INTC  |  --   | INTA
 	 *  -------------------------------------
 	 */
-	ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
-	ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+	__raw_writew(0x0013, FPGA_PCI_INTSEL1);
+	__raw_writew(0xE402, FPGA_PCI_INTSEL2);
 }
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index 1d3a867..6f7c207 100644
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -17,26 +17,17 @@
 #include <asm/heartbeat.h>
 
 /* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name           = "heartbeat",
 	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
 };
 
 /* SMC91x */
@@ -84,14 +75,14 @@ device_initcall(se7780_devices_setup);
 static void __init se7780_setup(char **cmdline_p)
 {
 	/* "SH-Linux" on LED Display */
-	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
-	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
-	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
-	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
-	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
-	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
-	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
-	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+	__raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	__raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	__raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	__raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	__raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	__raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	__raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	__raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
 
 	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
 
@@ -102,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p)
 	 *   REQ2/GNT2 -> Serial ATA
 	 *   REQ3/GNT3 -> PCI slot
 	 */
-	ctrl_outw(0x0213, FPGA_REQSEL);
+	__raw_writew(0x0213, FPGA_REQSEL);
 
 	/* GPIO setting */
-	ctrl_outw(0x0000, GPIO_PECR);
-	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
-	ctrl_outw(0x0c00, GPIO_PMSELR);
+	__raw_writew(0x0000, GPIO_PECR);
+	__raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	__raw_writew(0x0c00, GPIO_PMSELR);
 
 	/* iVDR Power ON */
-	ctrl_outw(0x0001, FPGA_IVDRPW);
+	__raw_writew(0x0001, FPGA_IVDRPW);
 }
 
 /*
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index a8b9f84..1b20099 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -44,15 +44,15 @@ unsigned long get_cmos_time(void)
 	spin_lock(&sh03_rtc_lock);
  again:
 	do {
-		sec  = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
-		min  = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
-		hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10;
-		day  = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10;
-		mon  = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10;
-		year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10
-		     + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100
-		     + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000;
-	} while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10);
+		sec  = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
+		min  = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+		hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
+		day  = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
+		mon  = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
+		year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+		     + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+		     + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
+	} while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
 	if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
 	    hour > 23 || min > 59 || sec > 59) {
 		printk(KERN_ERR
@@ -60,16 +60,16 @@ unsigned long get_cmos_time(void)
 		printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
 		       year, mon, day, hour, min, sec);
 
-		ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10);
-		ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10);
-		ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10);
-		ctrl_outb(6, RTC_WEE1);
-		ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10);
-		ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10);
-		ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10);
-		ctrl_outb(0, RTC_YEA100);
-		ctrl_outb(2, RTC_YEA1000);
-		ctrl_outb(0, RTC_CTL);
+		__raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
+		__raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
+		__raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
+		__raw_writeb(6, RTC_WEE1);
+		__raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
+		__raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
+		__raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
+		__raw_writeb(0, RTC_YEA100);
+		__raw_writeb(2, RTC_YEA1000);
+		__raw_writeb(0, RTC_CTL);
 		goto again;
 	}
 
@@ -93,9 +93,9 @@ static int set_rtc_mmss(unsigned long nowtime)
 	/* gets recalled with irq locally disabled */
 	spin_lock(&sh03_rtc_lock);
 	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
-		if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
+		if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
 			break;
-	cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
+	cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
 	real_seconds = nowtime % 60;
 	real_minutes = nowtime / 60;
 	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
@@ -103,10 +103,10 @@ static int set_rtc_mmss(unsigned long nowtime)
 	real_minutes %= 60;
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
-		ctrl_outb(real_seconds % 10, RTC_SEC1);
-		ctrl_outb(real_seconds / 10, RTC_SEC10);
-		ctrl_outb(real_minutes % 10, RTC_MIN1);
-		ctrl_outb(real_minutes / 10, RTC_MIN10);
+		__raw_writeb(real_seconds % 10, RTC_SEC1);
+		__raw_writeb(real_seconds / 10, RTC_SEC10);
+		__raw_writeb(real_minutes % 10, RTC_MIN1);
+		__raw_writeb(real_minutes / 10, RTC_MIN10);
 	} else {
 		printk(KERN_WARNING
 		       "set_rtc_mmss: can't update from %d to %d\n",
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 74cfb4b..af4a0c0 100644
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -82,7 +82,7 @@ static int __init sh03_devices_setup(void)
 	/* open I/O area window */
 	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
 	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
 	if (!cf_ide_base) {
 		printk("allocate_cf_area : can't open CF I/O window!\n");
 		return -ENOMEM;
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index d8ebfa7..add698c 100644
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -28,18 +28,18 @@
 void __init init_sh7763rdp_IRQ(void)
 {
 	/* GPIO enabled */
-	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+	__raw_writel(1 << 25, INTC_INT2MSKCR);
 
 	/* enable GPIO interrupts */
-	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+	__raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
 		  INTC_INT2PRI7);
 
 	/* USBH enabled */
-	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+	__raw_writel(1 << 17, INTC_INT2MSKCR1);
 
 	/* GETHER enabled */
-	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+	__raw_writel(1 << 16, INTC_INT2MSKCR1);
 
 	/* DMAC enabled */
-	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+	__raw_writel(1 << 8, INTC_INT2MSKCR);
 }
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 390534a..f64a691 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -158,50 +158,50 @@ device_initcall(sh7763rdp_devices_setup);
 static void __init sh7763rdp_setup(char **cmdline_p)
 {
 	/* Board version check */
-	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+	if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
 		printk(KERN_INFO "RTE Standard Configuration\n");
 	else
 		printk(KERN_INFO "RTA Standard Configuration\n");
 
 	/* USB pin select bits (clear bit 5-2 to 0) */
-	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
 	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
-	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+	__raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
 
 	/* Select USB Host controller */
-	ctrl_outw(0x00, USB_USBHSC);
+	__raw_writew(0x00, USB_USBHSC);
 
 	/* For LCD */
 	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	__raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
 	/* set PTI5, bits 11-10 of PICR to 0 */
-	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
-	ctrl_outw(0, PORT_PKCR);
-	ctrl_outw(0, PORT_PLCR);
+	__raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	__raw_writew(0, PORT_PKCR);
+	__raw_writew(0, PORT_PLCR);
 	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
-	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
 	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
-	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+	__raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
 
 	/* For HAC */
 	/* bit3-0  0100:HAC & SSI1 enable */
-	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	__raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
 	/* bit14      1:SSI_HAC_CLK enable */
-	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+	__raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
 
 	/* SH-Ether */
-	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
-	ctrl_outw(0x0, PORT_PFCR);
-	ctrl_outw(0x0, PORT_PFCR);
-	ctrl_outw(0x0, PORT_PFCR);
+	__raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
 
 	/* MMC */
 	/*selects SCIF and MMC other functions */
-	ctrl_outw(0x0001, PORT_PSEL0);
+	__raw_writew(0x0001, PORT_PSEL0);
 	/* MMC clock operates */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
-	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
-	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+	__raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
+	__raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
+	__raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
 }
 
 static struct sh_machine_vector mv_sh7763rdp __initmv = {
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index a3277a2..331745d 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -30,7 +30,7 @@
 
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	(void)ctrl_inb(0xb8000000);	/* dummy read */
+	(void)__raw_readb(0xb8000000);	/* dummy read */
 
 	printk("SnapGear: erase switch interrupt!\n");
 
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 986a0e7..523aea5 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -41,13 +41,13 @@ static void disable_systemh_irq(unsigned int irq)
 		unsigned long val, mask = 0x01 << 1;
 
 		/* Clear the "irq"th bit in the mask and set it in the request */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val = __raw_readl((unsigned long)systemh_irq_mask_register);
 		val &= ~mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+		__raw_writel(val, (unsigned long)systemh_irq_mask_register);
 
-		val = ctrl_inl((unsigned long)systemh_irq_request_register);
+		val = __raw_readl((unsigned long)systemh_irq_request_register);
 		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+		__raw_writel(val, (unsigned long)systemh_irq_request_register);
 	}
 }
 
@@ -57,9 +57,9 @@ static void enable_systemh_irq(unsigned int irq)
 		unsigned long val, mask = 0x01 << 1;
 
 		/* Set "irq"th bit in the mask register */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val = __raw_readl((unsigned long)systemh_irq_mask_register);
 		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+		__raw_writel(val, (unsigned long)systemh_irq_mask_register);
 	}
 }
 
diff --git a/arch/sh/boards/mach-titan/Makefile b/arch/sh/boards/mach-titan/Makefile
deleted file mode 100644
index 08d7537..0000000
--- a/arch/sh/boards/mach-titan/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Nimble Microsystems TITAN specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
deleted file mode 100644
index 0130e98..0000000
--- a/arch/sh/boards/mach-titan/io.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *	I/O routines for Titan
- */
-#include <linux/pci.h>
-#include <asm/machvec.h>
-#include <asm/addrspace.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static inline unsigned int port2adr(unsigned int port)
-{
-        maybebadio((unsigned long)port);
-        return port;
-}
-
-u8 titan_inb(unsigned long port)
-{
-        if (PXSEG(port))
-                return ctrl_inb(port);
-        return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-u8 titan_inb_p(unsigned long port)
-{
-        u8 v;
-
-        if (PXSEG(port))
-                v = ctrl_inb(port);
-        else
-                v = ctrl_inw(port2adr(port)) & 0xff;
-        ctrl_delay();
-        return v;
-}
-
-u16 titan_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return ctrl_inw(port);
-        else if (port >= 0x2000)
-                return ctrl_inw(port2adr(port));
-        else
-                maybebadio(port);
-        return 0;
-}
-
-u32 titan_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return ctrl_inl(port);
-        else if (port >= 0x2000)
-                return ctrl_inw(port2adr(port));
-        else
-                maybebadio(port);
-        return 0;
-}
-
-void titan_outb(u8 value, unsigned long port)
-{
-        if (PXSEG(port))
-                ctrl_outb(value, port);
-        else
-                ctrl_outw(value, port2adr(port));
-}
-
-void titan_outb_p(u8 value, unsigned long port)
-{
-        if (PXSEG(port))
-                ctrl_outb(value, port);
-        else
-                ctrl_outw(value, port2adr(port));
-        ctrl_delay();
-}
-
-void titan_outw(u16 value, unsigned long port)
-{
-        if (PXSEG(port))
-                ctrl_outw(value, port);
-        else if (port >= 0x2000)
-                ctrl_outw(value, port2adr(port));
-        else
-                maybebadio(port);
-}
-
-void titan_outl(u32 value, unsigned long port)
-{
-        if (PXSEG(port))
-                ctrl_outl(value, port);
-        else
-                maybebadio(port);
-}
-
-void titan_insl(unsigned long port, void *dst, unsigned long count)
-{
-        maybebadio(port);
-}
-
-void titan_outsl(unsigned long port, const void *src, unsigned long count)
-{
-        maybebadio(port);
-}
-
-void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-
-	return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/mach-titan/setup.c b/arch/sh/boards/mach-titan/setup.c
deleted file mode 100644
index 81e7e0f..0000000
--- a/arch/sh/boards/mach-titan/setup.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/sh/boards/titan/setup.c - Setup for Titan
- *
- *  Copyright (C) 2006  Jamie Lenehan
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <mach/titan.h>
-#include <asm/io.h>
-
-static void __init init_titan_irq(void)
-{
-	/* enable individual interrupt mode for externals */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static struct sh_machine_vector mv_titan __initmv = {
-	.mv_name =	"Titan",
-
-	.mv_inb =	titan_inb,
-	.mv_inw =	titan_inw,
-	.mv_inl =	titan_inl,
-	.mv_outb =	titan_outb,
-	.mv_outw =	titan_outw,
-	.mv_outl =	titan_outl,
-
-	.mv_inb_p =	titan_inb_p,
-	.mv_inw_p =	titan_inw,
-	.mv_inl_p =	titan_inl,
-	.mv_outb_p =	titan_outb_p,
-	.mv_outw_p =	titan_outw,
-	.mv_outl_p =	titan_outl,
-
-	.mv_insl =	titan_insl,
-	.mv_outsl =	titan_outsl,
-
-	.mv_ioport_map = titan_ioport_map,
-
-	.mv_init_irq =	init_titan_irq,
-};
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c..5c98427 100644
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
@@ -70,10 +70,10 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
 	pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
 		 __func__, bit, addr, shift, set);
 
-	tmp = ctrl_inw(addr);
+	tmp = __raw_readw(addr);
 	tmp &= ~(0xf << shift);
 	tmp |= set << shift;
-	ctrl_outw(tmp, addr);
+	__raw_writew(tmp, addr);
 }
 
 /**
@@ -142,9 +142,9 @@ void ilsel_disable(unsigned int irq)
 
 	addr = mk_ilsel_addr(irq);
 
-	tmp = ctrl_inw(addr);
+	tmp = __raw_readw(addr);
 	tmp &= ~(0xf << mk_ilsel_shift(irq));
-	ctrl_outw(tmp, addr);
+	__raw_writew(tmp, addr);
 
 	clear_bit(irq, &ilsel_level_map);
 }
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index efe4cb9..102bf56 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -19,6 +19,7 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
 #include <asm/ilsel.h>
+#include <asm/smp-ops.h>
 
 static struct resource heartbeat_resources[] = {
 	[0] = {
@@ -149,10 +150,16 @@ static void __init x3proto_init_irq(void)
 	plat_irq_setup_pins(IRQ_MODE_IRL3210);
 
 	/* Set ICR0.LVLMODE */
-	ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static void __init x3proto_setup(char **cmdline_p)
+{
+	register_smp_ops(&shx3_smp_ops);
 }
 
 static struct sh_machine_vector mv_x3proto __initmv = {
 	.mv_name		= "x3proto",
+	.mv_setup		= x3proto_setup,
 	.mv_init_irq		= x3proto_init_irq,
 };
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index cb8cf55..1ce6362 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -21,12 +21,15 @@ CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)  := gz
-suffix-$(CONFIG_KERNEL_BZIP2) := bz2
-suffix-$(CONFIG_KERNEL_LZMA)  := lzma
-
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
+suffix-$(CONFIG_KERNEL_LZO)	:= lzo
+
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
+	   uImage.bz2 uImage.lzma uImage.lzo uImage.bin
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
+	   vmlinux.bin.lzo
 subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -43,15 +46,8 @@ $(obj)/romImage: $(obj)/romimage/vmlinux FORCE
 $(obj)/romimage/vmlinux: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
 
-KERNEL_MEMORY := 0x00000000
-ifeq ($(CONFIG_PMB_FIXED),y)
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+KERNEL_MEMORY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
-endif
-ifeq ($(CONFIG_29BIT),y)
-KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_MEMORY_START)]')
-endif
 
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
@@ -80,6 +76,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzo)
+
 $(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
 	$(call if_changed,uimage,bzip2)
 
@@ -89,6 +88,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
+	$(call if_changed,uimage,lzo)
+
 $(obj)/uImage.bin: $(obj)/vmlinux.bin
 	$(call if_changed,uimage,none)
 
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 6182eca..cfa5a08 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -6,21 +6,24 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   vmlinux.bin.bz2 vmlinux.bin.lzma \
+		   vmlinux.bin.lzo \
 		   head_$(BITS).o misc.o piggy.o
 
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
-ifdef CONFIG_SH_STANDARD_BIOS
-OBJECTS += $(obj)/../../kernel/sh_bios.o
-endif
-
 #
 # IMAGE_OFFSET is the load offset of the compression loader
 #
+ifeq ($(CONFIG_32BIT),y)
+IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START)  + \
+			$(CONFIG_BOOT_LINK_OFFSET)]')
+else
 IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
 			$(CONFIG_BOOT_LINK_OFFSET)]')
+endif
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
@@ -47,6 +50,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzo)
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
diff --git a/arch/sh/boot/compressed/cache.c b/arch/sh/boot/compressed/cache.c
index e27fc74..d0b77b6 100644
--- a/arch/sh/boot/compressed/cache.c
+++ b/arch/sh/boot/compressed/cache.c
@@ -5,7 +5,7 @@ int cache_control(unsigned int command)
 
 	for (i = 0; i < (32 * 1024); i += 32) {
 		(void)*p;
-		p += (32 / sizeof (int));
+		p += (32 / sizeof(int));
 	}
 
 	return 0;
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index 02a3093..200c1d4 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -97,7 +97,11 @@ init_stack_addr:
 decompress_kernel_addr:
 	.long	decompress_kernel
 kernel_start_addr:
+#ifdef CONFIG_32BIT
+	.long	___pa(_text+PAGE_SIZE)
+#else
 	.long	_text+PAGE_SIZE
+#endif
 
 	.align	9
 fake_headers_as_bzImage:
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index b51b1fc..27140a6 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -14,7 +14,6 @@
 #include <asm/uaccess.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
-#include <asm/sh_bios.h>
 
 /*
  * gzip declarations
@@ -62,29 +61,15 @@ static unsigned long free_mem_end_ptr;
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
-#ifdef CONFIG_SH_STANDARD_BIOS
-size_t strlen(const char *s)
-{
-	int i = 0;
-
-	while (*s++)
-		i++;
-	return i;
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
 
 int puts(const char *s)
 {
-	int len = strlen(s);
-	sh_bios_console_write(s, len);
-	return len;
-}
-#else
-int puts(const char *s)
-{
 	/* This should be updated to use the sh-sci routines */
 	return 0;
 }
-#endif
 
 void* memset(void* s, int c, size_t n)
 {
@@ -132,7 +117,7 @@ void decompress_kernel(void)
 	output_addr = (CONFIG_MEMORY_START + 0x2000);
 #else
 	output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT)
 	output_addr |= P2SEG;
 #endif
 #endif
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index f473a24..2216ee5 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -1,16 +1,21 @@
 #
 # linux/arch/sh/boot/romimage/Makefile
 #
-# create an image suitable for burning to flash from zImage
+# create an romImage file suitable for burning to flash/mmc from zImage
 #
 
 targets		:= vmlinux head.o zeropage.bin piggy.o
+load-y		:= 0
 
-OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+mmcif-load-$(CONFIG_CPU_SUBTYPE_SH7724)	:= 0xe5200000 # ILRAM
+mmcif-obj-$(CONFIG_CPU_SUBTYPE_SH7724)	:= $(obj)/mmcif-sh7724.o
+load-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-load-y)
+obj-$(CONFIG_ROMIMAGE_MMCIF)		:= $(mmcif-obj-y)
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(load-y) -e romstart \
 		   -T $(obj)/../../kernel/vmlinux.lds
 
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/head.o $(obj-y) $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 93e779a..4671d1b 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -12,8 +12,40 @@ romstart:
 	/* include board specific setup code */
 #include <mach/romimage.h>
 
+#ifdef CONFIG_ROMIMAGE_MMCIF
+	/* load the romImage to above the empty zero page */
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	bytes_to_load, r5
+	mov.l	loader_function, r7
+	jsr	@r7
+	 mov	r4, r15
+
+	mov.l	empty_zero_page_dst, r4
+	mov.l	empty_zero_page_dst_adj, r5
+	add	r5, r4
+	mov.l	loaded_code_offs, r5
+	add	r5, r4
+	jmp	@r4
+	 nop
+
+	.balign 4
+empty_zero_page_dst_adj:
+	.long	PAGE_SIZE
+bytes_to_load:
+	.long	end_data - romstart
+loader_function:
+	.long	mmcif_loader
+loaded_code_offs:
+	.long	loaded_code - romstart
+loaded_code:
+#endif /* CONFIG_ROMIMAGE_MMCIF */
+
 	/* copy the empty_zero_page contents to where vmlinux expects it */
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	mov.l	extra_data_size, r1
+	add	r1, r0
 	mov.l	empty_zero_page_dst, r1
 	mov	#(PAGE_SHIFT - 4), r4
 	mov	#1, r3
@@ -37,7 +69,9 @@ romstart:
 	mov	#PAGE_SHIFT, r4
 	mov	#1, r1
 	shld	r4, r1
-	mova	empty_zero_page_src, r0
+	mova	extra_data_pos, r0
+	add	r1, r0
+	mov.l	extra_data_size, r1
 	add	r1, r0
 	jmp	@r0
 	 nop
@@ -45,4 +79,6 @@ romstart:
 	.align 2
 empty_zero_page_dst:
 	.long	_text
-empty_zero_page_src:
+extra_data_pos:
+extra_data_size:
+	.long	zero_page_pos - extra_data_pos
diff --git a/arch/sh/boot/romimage/mmcif-sh7724.c b/arch/sh/boot/romimage/mmcif-sh7724.c
new file mode 100644
index 0000000..14863d7
--- /dev/null
+++ b/arch/sh/boot/romimage/mmcif-sh7724.c
@@ -0,0 +1,72 @@
+/*
+ * sh7724 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/romimage.h>
+
+#define MMCIF_BASE      (void __iomem *)0xa4ca0000
+
+#define MSTPCR2		0xa4150038
+#define PTWCR		0xa4050146
+#define PTXCR		0xa4050148
+#define PSELA		0xa405014e
+#define PSELE		0xa4050156
+#define HIZCRC		0xa405015c
+#define DRVCRA		0xa405018a
+
+enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
+       MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
+
+/* SH7724 specific MMCIF loader
+ *
+ * loads the romImage from an MMC card starting from block 512
+ * use the following line to write the romImage to an MMC card
+ * # dd if=arch/sh/boot/romImage of=/dev/sdx bs=512 seek=512
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
+{
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* enable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
+
+	/* setup pins D7-D0 */
+	__raw_writew(0x0000, PTWCR);
+
+	/* setup pins MMC_CLK, MMC_CMD */
+	__raw_writew(__raw_readw(PTXCR) & ~0x000f, PTXCR);
+
+	/* select D3-D0 pin function */
+	__raw_writew(__raw_readw(PSELA) & ~0x2000, PSELA);
+
+	/* select D7-D4 pin function */
+	__raw_writew(__raw_readw(PSELE) & ~0x3000, PSELE);
+
+	/* disable Hi-Z for the MMC pins */
+	__raw_writew(__raw_readw(HIZCRC) & ~0x0620, HIZCRC);
+
+	/* high drive capability for MMC pins */
+	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_slurp(MMCIF_BASE, buf, no_bytes);
+
+	/* disable clock to the MMCIF hardware block */
+	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
index 287c08f..590394e 100644
--- a/arch/sh/boot/romimage/vmlinux.scr
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -1,6 +1,8 @@
 SECTIONS
 {
   .text : {
+	zero_page_pos = .;
 	*(.data)
+	end_data = .;
 	}
 }
diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c
index 50aa0c1..bcb31ae 100644
--- a/arch/sh/cchips/hd6446x/hd64461.c
+++ b/arch/sh/cchips/hd6446x/hd64461.c
@@ -55,25 +55,22 @@ static struct irq_chip hd64461_irq_chip = {
 
 static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	unsigned short intv = ctrl_inw(HD64461_NIRR);
-	struct irq_desc *ext_desc;
+	unsigned short intv = __raw_readw(HD64461_NIRR);
 	unsigned int ext_irq = HD64461_IRQBASE;
 
 	intv &= (1 << HD64461_IRQ_NUM) - 1;
 
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
 	}
 }
 
 int __init setup_hd64461(void)
 {
-	int i;
+	int i, nid = cpu_to_node(boot_cpu_data);
 
 	if (!MACH_HD64461)
 		return 0;
@@ -90,9 +87,26 @@ int __init setup_hd64461(void)
 	__raw_writew(0xffff, HD64461_NIMR);
 
 	/*  IRQ 80 -> 95 belongs to HD64461  */
-	for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++)
+	for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) {
+		unsigned int irq;
+
+		irq = create_irq_nr(i, nid);
+		if (unlikely(irq == 0)) {
+			pr_err("%s: failed hooking irq %d for HD64461\n",
+			       __func__, i);
+			return -EBUSY;
+		}
+
+		if (unlikely(irq != i)) {
+			pr_err("%s: got irq %d but wanted %d, bailing.\n",
+			       __func__, irq, i);
+			destroy_irq(irq);
+			return -EINVAL;
+		}
+
 		set_irq_chip_and_handler(i, &hd64461_irq_chip,
 					 handle_level_irq);
+	}
 
 	set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
 	set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 8931a60..7fefa2b 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:10:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:04:35 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,11 +74,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -107,7 +105,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -116,13 +114,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,8 +235,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -246,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -261,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -335,7 +335,7 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -371,6 +371,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -378,7 +379,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -594,6 +594,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -613,6 +614,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -774,6 +776,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -802,6 +805,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -814,15 +818,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -853,13 +851,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -891,22 +892,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -1041,10 +1045,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1120,8 +1121,6 @@ CONFIG_RTC_DRV_PCF8563=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1206,6 +1205,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1234,6 +1234,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1426,6 +1427,7 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index 92589a9..edae0a6 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:14:50 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:01:02 2010
 #
 CONFIG_SUPERH=y
 # CONFIG_SUPERH32 is not set
@@ -13,7 +13,6 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
@@ -32,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_POSIX_MQUEUE=y
@@ -70,7 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -114,7 +115,6 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
@@ -204,6 +204,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -225,7 +226,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -294,7 +295,6 @@ CONFIG_HZ=250
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -309,9 +309,9 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -337,7 +337,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -463,6 +462,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -480,6 +480,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -569,7 +570,7 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -638,6 +639,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -650,6 +653,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -732,6 +736,7 @@ CONFIG_DEVKMEM=y
 #
 # CONFIG_SERIAL_SH_SCI is not set
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -779,6 +784,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -791,15 +797,9 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -823,10 +823,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -863,6 +864,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -909,9 +911,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -919,6 +921,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -1125,6 +1128,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1153,6 +1157,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1208,6 +1213,7 @@ CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1234,6 +1240,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1361,6 +1368,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 55f652b..b96bf3d 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:17:35 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:11:55 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -72,7 +75,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -124,6 +126,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -242,6 +245,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -263,7 +267,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -360,7 +364,6 @@ CONFIG_SECCOMP=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -377,9 +380,9 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 #
 CONFIG_MAPLE=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -404,7 +407,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -532,6 +534,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -549,7 +552,7 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -589,6 +592,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -717,6 +721,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -771,6 +776,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -778,6 +784,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -918,7 +925,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -976,6 +982,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -990,6 +997,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1135,6 +1143,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 662c1ad..58aec9d 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:18:17 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:14:56 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,11 +74,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -86,6 +84,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -111,7 +110,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -120,13 +119,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,8 +236,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -246,6 +245,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -261,7 +262,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -336,7 +337,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -370,6 +371,7 @@ CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -377,7 +379,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -485,6 +486,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -585,6 +587,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -650,6 +653,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -678,6 +682,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -690,15 +695,9 @@ CONFIG_I2C_SH_MOBILE=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -712,13 +711,16 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -747,20 +749,23 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -868,7 +873,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -880,7 +884,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -911,7 +914,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1027,6 +1029,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1056,6 +1059,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 18e3356..67c6656 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:20:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:17:28 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,14 +74,8 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -107,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -116,13 +113,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -234,12 +231,12 @@ CONFIG_CPU_SUBTYPE_SH7724=y
 CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x10000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -247,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -262,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -337,7 +336,7 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -347,7 +346,7 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_OVERWRITE=y
 # CONFIG_CMDLINE_EXTEND is not set
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
 
 #
 # Bus options
@@ -373,6 +372,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -380,7 +380,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -445,7 +444,45 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+CONFIG_SH_SIR=y
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
@@ -556,6 +593,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -597,6 +635,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -616,6 +655,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -723,6 +763,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -768,7 +809,29 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -802,10 +865,10 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
@@ -830,6 +893,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -843,15 +907,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -882,13 +940,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -919,23 +980,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -985,10 +1049,10 @@ CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
 # CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
+CONFIG_SOC_CAMERA_MT9T112=y
 # CONFIG_SOC_CAMERA_MT9V022 is not set
 # CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
 # CONFIG_SOC_CAMERA_OV772X is not set
 # CONFIG_SOC_CAMERA_OV9640 is not set
@@ -1001,6 +1065,7 @@ CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_SI470X is not set
 # CONFIG_USB_MR800 is not set
 # CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
 # CONFIG_RADIO_TEF6862 is not set
 # CONFIG_DAB is not set
 
@@ -1034,6 +1099,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_TMIO is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1062,7 +1128,46 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_SND_FSI_AK4642 is not set
+CONFIG_SND_FSI_DA7210=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_DA7210=y
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HIDRAW is not set
@@ -1077,6 +1182,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1091,12 +1197,16 @@ CONFIG_USB_HID=y
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1136,6 +1246,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1188,7 +1299,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1200,8 +1310,45 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1224,10 +1371,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
+CONFIG_MMC_TMIO=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1253,10 +1398,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_BQ32K is not set
@@ -1303,8 +1448,6 @@ CONFIG_RTC_DRV_PCF8563=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1390,6 +1533,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1418,6 +1562,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1487,6 +1632,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1611,6 +1757,7 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
@@ -1618,7 +1765,7 @@ CONFIG_CRYPTO_HW=y
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 72f8718..0883d87 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:24:26 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:21:52 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -12,8 +12,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,6 +29,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -43,9 +44,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
@@ -61,11 +64,11 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_KALLSYMS is not set
@@ -87,7 +90,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
@@ -103,6 +106,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -202,6 +206,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -217,7 +222,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -330,6 +335,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_PHONE is not set
@@ -361,6 +367,7 @@ CONFIG_HAVE_IDE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -440,6 +447,7 @@ CONFIG_INOTIFY_USER=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # Pseudo filesystems
@@ -491,6 +499,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 0932e6d..8257f57 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:24:44 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:23:10 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -72,7 +75,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -83,6 +85,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -110,8 +113,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -128,6 +132,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -246,6 +251,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -261,7 +267,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -342,7 +348,6 @@ CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -379,7 +384,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -579,6 +583,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -685,6 +690,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -713,6 +719,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_SH7760=y
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -725,15 +732,9 @@ CONFIG_I2C_SH7760=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
 
 #
@@ -756,6 +757,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -763,12 +765,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -947,6 +950,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -969,6 +973,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1048,6 +1053,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1096,6 +1102,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1214,6 +1221,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index f899e56..8acdc37 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:26:55 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:27:14 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,11 +72,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -112,7 +110,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -120,7 +117,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -131,6 +127,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -243,7 +240,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
+# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -253,6 +250,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -269,7 +267,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -344,7 +342,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -381,7 +379,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -444,7 +441,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -584,6 +580,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -688,6 +685,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -753,6 +751,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -944,7 +943,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -956,7 +954,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1052,6 +1049,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1078,6 +1076,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1144,13 +1143,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1158,10 +1156,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1269,7 +1264,8 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 0664490..f894bdc 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:30:31 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:30:50 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
@@ -66,7 +69,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -99,7 +101,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -115,6 +117,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -228,6 +231,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -243,7 +247,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -326,7 +330,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -344,7 +347,6 @@ CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -369,6 +371,7 @@ CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_APM_EMULATION=y
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
@@ -412,6 +415,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -544,6 +548,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -722,7 +727,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -780,6 +784,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -977,6 +982,7 @@ CONFIG_CRYPTO_MD5=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index 3d834e5..8c54e16 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:31:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:33:23 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -70,11 +73,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -85,6 +83,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -110,7 +109,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -119,13 +118,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -222,8 +221,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -231,6 +230,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -246,7 +247,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -321,7 +322,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -354,6 +355,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -361,7 +363,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -449,6 +450,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_NETDEVICES is not set
@@ -511,6 +513,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -538,6 +541,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -549,15 +553,9 @@ CONFIG_I2C_SH_MOBILE=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -571,13 +569,16 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -606,20 +607,23 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -690,6 +694,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=y
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -794,6 +799,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index f22be49..2e74b08 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:32:55 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:35:20 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -72,11 +75,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -87,6 +85,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -112,7 +111,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -121,13 +120,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -243,8 +242,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -252,6 +251,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -267,7 +268,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -343,7 +344,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -377,6 +378,7 @@ CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -386,7 +388,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -580,6 +581,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -659,6 +661,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -687,6 +690,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -699,15 +703,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -721,13 +719,16 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -756,20 +757,23 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -889,6 +893,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -912,9 +917,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -982,8 +984,6 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -996,7 +996,6 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1074,6 +1073,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1103,6 +1103,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 2a42d49..8778934 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:35:31 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:38:08 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,7 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -102,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -120,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -238,6 +241,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -253,7 +257,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -333,7 +337,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -348,15 +351,14 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -392,7 +394,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -612,6 +613,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -711,7 +713,7 @@ CONFIG_MD_RAID1=m
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -751,6 +753,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -798,6 +801,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -810,6 +815,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -835,6 +841,7 @@ CONFIG_WLAN=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -910,6 +917,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -977,6 +985,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -984,6 +993,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1025,6 +1035,7 @@ CONFIG_USB_HID=m
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -1040,14 +1051,19 @@ CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=m
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=m
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=m
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1169,6 +1185,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
 # CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1182,6 +1199,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1194,7 +1212,6 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,7 +1225,6 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1313,6 +1329,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1347,6 +1364,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1531,6 +1549,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index f2f1f8c..6088a76 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:37:01 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:42:57 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,7 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -102,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -120,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -238,6 +241,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -253,7 +257,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -333,7 +337,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -349,15 +352,14 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -392,7 +394,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -552,6 +553,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -670,6 +672,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -707,7 +710,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -747,6 +750,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -798,6 +802,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -810,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -908,6 +915,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -975,6 +983,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -982,6 +991,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1155,6 +1165,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1173,6 +1184,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1357,6 +1369,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index a7a16ce..28c104d 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:37:42 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:44:00 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,7 +74,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -82,6 +84,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -109,8 +112,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -126,6 +130,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -244,6 +249,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -259,7 +265,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -344,7 +350,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -380,7 +385,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -586,6 +590,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -741,6 +746,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -765,6 +771,7 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
@@ -953,6 +960,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -977,6 +985,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1051,6 +1060,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1097,6 +1107,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1125,6 +1136,7 @@ CONFIG_DUMP_CODE=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index 7d43fab..41cefa4 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:40:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:48:22 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -69,7 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -80,6 +82,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -106,7 +109,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -122,6 +125,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -235,6 +239,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -256,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -334,7 +339,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -515,6 +519,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -596,6 +601,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -774,6 +780,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -800,6 +807,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -992,6 +1000,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index d2b1831..1c889b7 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:41:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:01:29 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,7 +74,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -82,6 +84,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -109,7 +112,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -117,17 +119,16 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -243,7 +244,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_X2TLB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=1
@@ -254,6 +255,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -271,7 +274,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -348,7 +351,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -384,6 +387,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -391,7 +395,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -454,7 +457,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -564,6 +566,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND_SH_FLCTL is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -596,6 +599,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -612,6 +616,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -764,6 +769,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -792,6 +798,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -804,15 +811,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -826,13 +827,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -861,20 +865,23 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1054,6 +1061,7 @@ CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1129,8 +1137,6 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1143,7 +1149,6 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1202,6 +1207,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1224,6 +1230,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1251,13 +1258,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1265,10 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1383,7 +1386,8 @@ CONFIG_CRYPTO_WORKQUEUE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index d50c031..826b119 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 11:45:25 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:53:51 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,11 +74,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,8 +107,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -126,6 +125,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -244,6 +244,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -259,7 +260,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -340,7 +341,6 @@ CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -377,7 +377,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -583,6 +582,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -712,6 +712,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -829,7 +830,6 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -896,6 +896,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -919,6 +920,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -958,6 +960,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1010,6 +1013,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1038,6 +1042,7 @@ CONFIG_DUMP_CODE=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index efda63d..4b751bd 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:16:13 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 15:58:09 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,11 +76,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -112,7 +110,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -122,7 +119,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -133,6 +129,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -245,11 +242,8 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
+CONFIG_29BIT=y
 # CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -257,6 +251,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -278,7 +273,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -358,7 +353,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -374,9 +369,9 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -402,7 +397,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -452,6 +446,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -472,7 +467,6 @@ CONFIG_LLC=m
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -621,6 +615,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -638,6 +633,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -755,6 +751,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -791,7 +788,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -832,6 +829,7 @@ CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -884,6 +882,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -896,6 +896,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -995,6 +996,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1043,6 +1045,7 @@ CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1055,15 +1058,9 @@ CONFIG_I2C_HIGHLANDER=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1087,10 +1084,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1127,6 +1125,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1156,6 +1155,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -1163,12 +1163,14 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1176,6 +1178,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1372,6 +1375,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1402,6 +1406,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1480,6 +1485,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1490,7 +1496,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1507,11 +1512,11 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1519,10 +1524,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1535,6 +1537,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1662,7 +1665,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index f4b0045..f5e3819 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:19:35 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:03:27 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -34,6 +34,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -49,9 +50,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -77,7 +80,6 @@ CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -112,7 +114,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -122,18 +123,17 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -247,12 +247,9 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
+CONFIG_29BIT=y
 # CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
-# CONFIG_X2TLB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -263,6 +260,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -285,7 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -303,6 +302,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
+# CONFIG_SPECULATIVE_EXECUTION is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_FPU=y
@@ -377,7 +377,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -393,9 +393,9 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -421,7 +421,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -471,6 +470,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -492,7 +492,6 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -557,6 +556,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -574,6 +574,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -691,6 +692,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -727,7 +729,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -797,6 +799,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -809,6 +813,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -910,6 +915,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -959,6 +965,7 @@ CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -971,15 +978,9 @@ CONFIG_I2C_HIGHLANDER=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -994,13 +995,17 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1033,10 +1038,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1074,6 +1080,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1102,20 +1109,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1123,6 +1135,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1371,6 +1384,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1401,6 +1415,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1475,6 +1490,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1510,7 +1526,6 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1518,10 +1533,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1534,6 +1546,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1661,7 +1674,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 2fc635a..80e7b41 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:23:12 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:09:18 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,9 +45,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -65,7 +68,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -79,6 +81,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -105,7 +108,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -114,7 +116,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLOB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -124,6 +125,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -240,6 +242,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -255,7 +258,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -326,7 +329,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -485,6 +487,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -545,6 +548,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -657,7 +661,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -720,6 +723,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -756,13 +760,12 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -770,10 +773,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -795,7 +795,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 0169e60..66eb7d7 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:23:54 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:11:37 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -70,7 +73,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -85,6 +87,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -112,7 +115,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -122,7 +124,6 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLOB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -132,6 +133,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -248,6 +250,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -263,7 +266,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -350,7 +353,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -448,7 +450,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -592,6 +593,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -662,6 +664,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -723,6 +726,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=4
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -745,6 +749,7 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
@@ -783,6 +788,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
@@ -816,6 +822,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -831,14 +838,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -859,7 +871,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -916,7 +927,6 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -928,7 +938,6 @@ CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -948,11 +957,11 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
@@ -1018,7 +1027,6 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1072,6 +1080,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1098,6 +1107,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1180,6 +1190,7 @@ CONFIG_DEBUG_OBJECTS=y
 # CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1189,7 +1200,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1207,11 +1217,11 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1219,10 +1229,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1234,6 +1241,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1263,7 +1271,8 @@ CONFIG_DUMP_CODE=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index fba1f62..6bd3d95 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:25:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:15:07 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -70,7 +73,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -104,7 +106,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -113,7 +114,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -124,6 +124,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -242,6 +243,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -257,7 +259,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -343,7 +345,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -359,9 +360,9 @@ CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -389,7 +390,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -449,7 +449,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -525,6 +524,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -642,6 +642,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -678,7 +679,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -719,6 +720,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -771,6 +773,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -783,6 +787,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -805,6 +810,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -877,11 +883,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -964,6 +971,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -971,6 +979,7 @@ CONFIG_MFD_SM501=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1152,6 +1161,7 @@ CONFIG_SND_SPI=y
 CONFIG_SND_SUPERH=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=m
@@ -1170,6 +1180,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1185,14 +1196,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1291,7 +1307,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1303,7 +1318,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1381,7 +1395,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1442,6 +1455,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1456,6 +1470,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1522,13 +1537,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1536,10 +1550,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1648,7 +1659,8 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index a8d538f..487abcc 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:26:39 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:20:00 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -70,7 +73,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -104,7 +106,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -113,7 +114,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -124,6 +124,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -242,6 +243,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -257,7 +259,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -343,7 +345,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -359,9 +360,9 @@ CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -389,7 +390,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -449,7 +449,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -611,6 +610,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -728,6 +728,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -764,7 +765,7 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -805,6 +806,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -857,6 +859,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -869,6 +873,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -891,6 +896,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -963,11 +969,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1050,6 +1057,7 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1057,6 +1065,7 @@ CONFIG_MFD_SM501=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1238,6 +1247,7 @@ CONFIG_SND_SPI=y
 CONFIG_SND_SUPERH=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=m
@@ -1256,6 +1266,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1271,14 +1282,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1377,7 +1393,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1389,7 +1404,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1467,7 +1481,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1529,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1543,6 +1557,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1609,13 +1624,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1623,10 +1637,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1735,7 +1746,8 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 1859ba0..fe92314 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:27:20 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:21:00 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,7 +76,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -107,8 +109,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -126,6 +129,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,11 +241,8 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
+CONFIG_29BIT=y
 # CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -249,6 +250,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -270,7 +272,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -353,7 +355,7 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -369,16 +371,15 @@ CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/n
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -417,7 +418,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -659,6 +659,7 @@ CONFIG_BLK_DEV_GENERIC=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -777,6 +778,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -824,7 +826,7 @@ CONFIG_BLK_DEV_DM=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -890,6 +892,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -995,6 +998,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1057,6 +1061,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1064,6 +1069,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1167,6 +1173,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1182,14 +1189,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1288,7 +1300,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1301,7 +1312,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1317,10 +1327,6 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-
-#
-# LED Triggers
-#
 # CONFIG_LEDS_TRIGGERS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
@@ -1416,6 +1422,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1444,6 +1451,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1523,6 +1531,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1571,6 +1580,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1690,6 +1700,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
new file mode 100644
index 0000000..2698245
--- /dev/null
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -0,0 +1,2008 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:03:37 2010
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_LOCKBREAK=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DMA_COHERENT=y
+# CONFIG_DMA_NONCOHERENT is not set
+# CONFIG_NEED_DMA_MAP_STATE is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+CONFIG_TREE_PREEMPT_RCU=y
+# CONFIG_TINY_RCU is not set
+CONFIG_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+# CONFIG_PROC_PID_CPUSET is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_MM_OWNER=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_SLOW_WORK_DEBUG=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLK_CGROUP=y
+# CONFIG_DEBUG_BLK_CGROUP is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+# CONFIG_DEBUG_CFQ_IOSCHED is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+# CONFIG_29BIT is not set
+CONFIG_32BIT=y
+CONFIG_PMB=y
+CONFIG_X2TLB=y
+CONFIG_VSYSCALL=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=1
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_SCHED_MC=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEAEX=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SDK7786=y
+# CONFIG_SH_URQUELL is not set
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+CONFIG_SH_CLK_CPG=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+# CONFIG_SH_DMA_API is not set
+CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_INTC_USERIMASK=y
+CONFIG_INTC_BALANCING=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+CONFIG_PCIEAER_INJECT=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEBUG=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+CONFIG_PM_VERBOSE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_NFTL=y
+# CONFIG_NFTL_RW is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_PHRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_SH_FLCTL=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=m
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_BLK_DEV_PLATFORM=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_DMA=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_SH_MSIOF is not set
+# CONFIG_SPI_SH_SCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SH_MOBILE_SDHI is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+CONFIG_RTC_DRV_MAX6900=y
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+CONFIG_SH_DMAE=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_PCI_GENERIC=m
+# CONFIG_UIO_NETX is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_ECHO is not set
+# CONFIG_POCH is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VME_BUS is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+CONFIG_RAMZSWAP=m
+CONFIG_RAMZSWAP_STATS=y
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_BTRFS_FS=y
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_LOGFS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=m
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_RCU_CPU_STALL_VERBOSE is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FTRACE_NMI_ENTER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_RING_BUFFER=y
+CONFIG_FTRACE_NMI_ENTER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_FUNCTION_GRAPH_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+CONFIG_KSYM_TRACER=y
+# CONFIG_PROFILE_KSYM_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+CONFIG_DMA_API_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_STACK_DEBUG is not set
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_DUMP_CODE=y
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_MCOUNT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_BTREE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 43e6780..910eaec 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:30:00 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:34:06 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -72,7 +75,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_TREE_RCU_TRACE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_NS=y
@@ -82,6 +84,7 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_MM_OWNER=y
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
@@ -96,6 +99,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -123,7 +127,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -133,7 +136,6 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLOB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -143,6 +145,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -162,7 +165,6 @@ CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 
 #
 # IO Schedulers
@@ -261,6 +263,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -276,7 +279,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -361,7 +364,6 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -400,7 +402,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -463,7 +464,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -607,6 +607,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -688,6 +689,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=4
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -799,7 +801,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -853,6 +854,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -881,6 +883,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -919,6 +922,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -929,7 +933,6 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -947,11 +950,11 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -959,10 +962,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -975,6 +975,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1094,7 +1095,8 @@ CONFIG_CRYPTO_LZO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index ec494e3..586cb1e 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:30:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:37:31 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -70,11 +73,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -107,7 +105,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -124,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -245,6 +244,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -260,7 +260,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -335,7 +335,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -370,6 +370,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -377,7 +378,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -569,6 +569,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -635,6 +636,7 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_CDCETHER=y
 # CONFIG_USB_NET_CDC_EEM is not set
 CONFIG_USB_NET_DM9601=y
+# CONFIG_USB_NET_SMSC75XX is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
@@ -644,6 +646,7 @@ CONFIG_USB_NET_DM9601=y
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -713,6 +716,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=4
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -739,6 +743,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -752,15 +757,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -783,6 +782,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -790,12 +790,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -878,6 +879,7 @@ CONFIG_SND_DRIVERS=y
 CONFIG_SND_SUPERH=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
@@ -895,6 +897,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -910,14 +913,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -997,7 +1005,6 @@ CONFIG_USB_ISP116X_HCD=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1009,7 +1016,6 @@ CONFIG_USB_ISP116X_HCD=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1027,8 +1033,6 @@ CONFIG_RTC_LIB=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1115,6 +1119,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1141,6 +1146,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1324,6 +1330,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index ee87e2b..acb3e02 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:34:15 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:41:13 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,9 +45,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
@@ -62,7 +65,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -91,7 +93,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +109,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -217,6 +220,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -232,7 +236,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -301,7 +305,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -453,6 +456,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -513,6 +517,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -612,7 +617,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -664,6 +668,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -729,6 +734,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 03f4219..084fec9 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:34:37 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:42:43 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -67,7 +70,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -76,6 +78,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -101,7 +104,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -117,6 +120,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -234,6 +238,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -249,7 +254,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -327,7 +332,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -362,7 +366,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -562,6 +565,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -679,6 +683,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -798,7 +803,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -863,6 +867,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -885,6 +890,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1026,6 +1032,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index cfa5819..4487a23 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:44:56 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:05:15 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -12,8 +12,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,6 +29,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -43,9 +44,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -68,7 +71,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -102,8 +104,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -119,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -236,6 +240,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -251,7 +256,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -329,7 +334,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -366,7 +370,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -614,6 +617,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -754,6 +758,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -834,11 +839,11 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -940,6 +945,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -962,6 +968,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -997,6 +1004,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1042,6 +1050,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1167,6 +1176,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 201283c..7c06b5c 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:46:58 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:06:03 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -12,8 +12,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,9 +45,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,11 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -107,8 +105,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -124,6 +123,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -241,6 +241,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -256,7 +257,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -334,7 +335,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -371,7 +371,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -620,6 +619,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -687,6 +687,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -764,6 +765,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -829,6 +831,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -844,14 +847,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -946,7 +954,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -958,7 +965,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -973,11 +979,11 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1082,6 +1088,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1163,6 +1170,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1208,6 +1216,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1333,6 +1342,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 4a4efd2..42782e7 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 13:49:15 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:07:07 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,7 +76,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -84,6 +86,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -122,13 +125,13 @@ CONFIG_PROFILING=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -245,7 +248,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_X2TLB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=1
@@ -256,6 +259,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -279,7 +284,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -356,7 +361,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -391,6 +396,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -398,7 +404,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -519,6 +524,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -676,6 +682,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -898,6 +905,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -912,6 +920,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -944,6 +953,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1059,6 +1069,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index ab371af..ebb4ac4 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:36:56 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 16:55:41 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -47,9 +48,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,11 +74,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -107,7 +105,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -116,13 +114,13 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,8 +235,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -246,6 +244,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -261,7 +261,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -340,7 +340,7 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -376,6 +376,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -383,7 +384,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -559,6 +559,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -600,6 +601,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -619,6 +621,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -726,6 +729,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -805,6 +809,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -833,6 +838,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -846,15 +852,9 @@ CONFIG_I2C_SH_MOBILE=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -885,13 +885,16 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -923,22 +926,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
@@ -1001,7 +1007,9 @@ CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
 # CONFIG_USB_STV06XX is not set
 # CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
 # CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
 # CONFIG_USB_GSPCA_JEILINJ is not set
@@ -1009,9 +1017,11 @@ CONFIG_USB_GSPCA=m
 # CONFIG_USB_GSPCA_MR97310A is not set
 # CONFIG_USB_GSPCA_OV519 is not set
 # CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7302 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
 # CONFIG_USB_GSPCA_SN9C20X is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
 # CONFIG_USB_GSPCA_SONIXJ is not set
@@ -1033,6 +1043,7 @@ CONFIG_USB_GSPCA=m
 # CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_HDPVR is not set
 # CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_TLG2300 is not set
 # CONFIG_VIDEO_CX231XX is not set
 # CONFIG_VIDEO_USBVISION is not set
 # CONFIG_USB_ET61X251 is not set
@@ -1147,6 +1158,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_SUPERH is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 
@@ -1155,6 +1167,7 @@ CONFIG_SND_SOC=m
 #
 CONFIG_SND_SOC_SH4_FSI=m
 CONFIG_SND_FSI_AK4642=y
+# CONFIG_SND_FSI_DA7210 is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 CONFIG_SND_SOC_ALL_CODECS=m
 CONFIG_SND_SOC_WM_HUBS=m
@@ -1167,6 +1180,7 @@ CONFIG_SND_SOC_AK4535=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_AK4671=m
 CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_DA7210=m
 CONFIG_SND_SOC_L3=m
 CONFIG_SND_SOC_PCM3008=m
 CONFIG_SND_SOC_SPDIF=m
@@ -1189,17 +1203,21 @@ CONFIG_SND_SOC_WM8753=m
 CONFIG_SND_SOC_WM8776=m
 CONFIG_SND_SOC_WM8900=m
 CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8904=m
 CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8955=m
 CONFIG_SND_SOC_WM8960=m
 CONFIG_SND_SOC_WM8961=m
 CONFIG_SND_SOC_WM8971=m
 CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SOC_WM8988=m
 CONFIG_SND_SOC_WM8990=m
 CONFIG_SND_SOC_WM8993=m
 CONFIG_SND_SOC_WM9081=m
 CONFIG_SND_SOC_MAX9877=m
 CONFIG_SND_SOC_TPA6130A2=m
+CONFIG_SND_SOC_WM2000=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1215,6 +1233,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1229,12 +1248,16 @@ CONFIG_USB_HID=y
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1327,7 +1350,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1339,7 +1361,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=2
@@ -1378,6 +1399,7 @@ CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1401,10 +1423,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1480,8 +1499,6 @@ CONFIG_RTC_DRV_PCF8563=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1566,6 +1583,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1594,6 +1612,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1786,6 +1805,7 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index b15a44e..e096c3e 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:39:10 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:00:16 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -70,7 +73,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -103,7 +105,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -120,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,6 +240,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -252,7 +256,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -329,7 +333,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -364,7 +367,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -580,6 +582,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -698,6 +701,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -816,7 +820,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -885,6 +888,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -907,6 +911,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1063,6 +1068,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index d1effde..84d3fac 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:39:56 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:03:26 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,7 +72,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -80,6 +82,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -106,7 +109,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -123,6 +126,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -240,6 +244,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -255,7 +260,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -333,7 +338,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -369,7 +373,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -589,6 +592,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -666,6 +670,7 @@ CONFIG_DEVKMEM=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -785,7 +790,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -854,6 +858,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -868,6 +873,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1012,6 +1018,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 58533d5..f0d7e67 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:40:32 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:06:12 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -100,7 +103,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -117,6 +120,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -238,6 +242,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -253,7 +258,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -328,6 +333,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -343,9 +349,9 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 
@@ -362,7 +368,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -571,6 +576,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -714,7 +720,7 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -772,6 +778,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -807,6 +814,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -878,6 +886,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -928,6 +937,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -935,6 +945,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1032,6 +1043,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1047,14 +1059,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1148,7 +1165,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1161,7 +1177,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1192,7 +1207,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1211,6 +1225,7 @@ CONFIG_INOTIFY_USER=y
 #
 # Caches
 #
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1332,6 +1347,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1442,6 +1458,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 666fde1..562147d 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:41:25 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:10:00 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,7 +76,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -84,6 +86,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -111,7 +114,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -120,7 +122,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -131,6 +132,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -250,6 +252,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -265,7 +268,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -342,7 +345,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -358,9 +360,9 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -388,7 +390,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -453,7 +454,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -574,6 +574,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=m
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
@@ -664,7 +665,7 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -704,6 +705,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -751,6 +753,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -763,6 +767,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -853,6 +858,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -927,6 +933,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -934,6 +941,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1075,6 +1083,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1105,6 +1114,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1187,13 +1197,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1201,10 +1210,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1323,7 +1329,8 @@ CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 35a3bee..98485ca 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 14:43:04 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:14:59 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,6 +30,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,9 +45,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -68,11 +71,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -105,7 +103,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -122,6 +120,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -240,6 +239,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -255,7 +255,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -331,7 +331,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -367,7 +366,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -620,6 +618,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -723,6 +722,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -824,7 +824,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -890,6 +889,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -904,6 +904,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -934,6 +935,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1049,6 +1051,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index a3056b6..a6a9e68 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:03:45 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:17:36 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -65,11 +68,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
@@ -78,6 +76,7 @@ CONFIG_CGROUPS=y
 # CONFIG_CPUSETS is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -106,7 +105,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
@@ -114,21 +112,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
 #
-# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +134,6 @@ CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 
 #
 # IO Schedulers
@@ -235,8 +230,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -246,6 +241,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -262,7 +259,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -353,7 +350,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -390,6 +387,7 @@ CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -428,6 +426,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -467,6 +466,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -491,6 +491,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -502,15 +503,9 @@ CONFIG_I2C_SH_MOBILE=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -533,6 +528,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -540,12 +536,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -629,8 +626,6 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -643,7 +638,6 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -707,15 +701,12 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -723,13 +714,9 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -747,7 +734,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 04b841b..6f308b7 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:05:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:19:21 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -69,11 +72,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -112,7 +110,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -120,7 +117,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -131,6 +127,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -243,7 +240,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
+# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -253,6 +250,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -269,7 +267,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -344,7 +342,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -381,7 +379,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -444,7 +441,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -585,6 +581,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -689,6 +686,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -754,6 +752,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -945,7 +944,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -957,7 +955,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -980,9 +977,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1074,6 +1068,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1096,6 +1091,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1162,13 +1158,12 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1176,10 +1171,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1287,7 +1279,8 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index 7b24705..4327f89 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:06:28 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:20:25 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -45,9 +46,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -64,11 +67,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
@@ -77,6 +75,7 @@ CONFIG_CGROUPS=y
 # CONFIG_CPUSETS is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -105,7 +104,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
@@ -113,7 +111,6 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,11 +120,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
 #
-# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +134,6 @@ CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 
 #
 # IO Schedulers
@@ -232,7 +228,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
+# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -242,6 +238,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -258,7 +255,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -347,7 +344,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -382,6 +379,7 @@ CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -420,6 +418,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -459,6 +458,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -483,6 +483,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -494,15 +495,9 @@ CONFIG_I2C_SH_MOBILE=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -525,6 +520,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -532,12 +528,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -621,8 +618,6 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -635,7 +630,6 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -699,15 +693,12 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -715,13 +706,9 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -739,7 +726,8 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index 8330813..71f39c7 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:07:40 2010
+# Linux kernel version: 2.6.34
+# Mon May 24 08:33:02 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,12 +76,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
+CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -112,27 +110,26 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 CONFIG_PERF_COUNTERS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_OPROFILE=y
+# CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
+# CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
 
 #
 # GCOV-based kernel profiling
@@ -248,10 +245,8 @@ CONFIG_MEMORY_START=0x40000000
 CONFIG_MEMORY_SIZE=0x20000000
 # CONFIG_29BIT is not set
 CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
-# CONFIG_X2TLB is not set
+CONFIG_PMB=y
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -262,13 +257,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
-# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
@@ -280,11 +277,11 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -302,6 +299,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_FPU=y
@@ -374,7 +372,7 @@ CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_INTC_USERIMASK=y
 
 #
 # Boot options
@@ -389,9 +387,10 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
+CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -421,7 +420,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -469,6 +467,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
@@ -489,8 +488,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -503,11 +500,20 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
+
+#
+# Some wireless drivers require a rate control algorithm
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
 #
+# CAIF Support
+#
+# CONFIG_CAIF is not set
+
+#
 # Device Drivers
 #
 
@@ -518,7 +524,11 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -541,6 +551,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
 
 #
@@ -633,6 +644,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -671,7 +683,9 @@ CONFIG_ATA=y
 CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
 # CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_INIC162X is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
@@ -686,7 +700,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -706,6 +719,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -742,7 +756,7 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -755,8 +769,36 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_SMC91X is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -797,6 +839,7 @@ CONFIG_R8169=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -837,6 +880,7 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
@@ -885,6 +929,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
 # CONFIG_NOZOMI is not set
 
 #
@@ -901,6 +946,9 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
@@ -947,6 +995,7 @@ CONFIG_I2C_ALGOPCA=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -960,15 +1009,9 @@ CONFIG_I2C_ALGOPCA=y
 #
 CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1011,6 +1054,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -1018,12 +1062,14 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1073,7 +1119,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_VIA is not set
 # CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
+CONFIG_FB_KYRO=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_VT8623 is not set
@@ -1099,15 +1145,15 @@ CONFIG_FB_SM501=y
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
@@ -1131,15 +1177,18 @@ CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_VMASTER=y
 CONFIG_SND_RAWMIDI_SEQ=y
 CONFIG_SND_OPL3_LIB_SEQ=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=y
 CONFIG_SND_MPU401_UART=y
 CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
@@ -1174,7 +1223,7 @@ CONFIG_SND_CMIPCI=y
 # CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_INDIGOIOX is not set
 # CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
+CONFIG_SND_EMU10K1=y
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
@@ -1209,9 +1258,11 @@ CONFIG_SND_CMIPCI=y
 # CONFIG_SND_SUPERH is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HIDRAW is not set
@@ -1226,39 +1277,43 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_SMARTJOYPLUS=m
-# CONFIG_SMARTJOYPLUS_FF is not set
-CONFIG_HID_TOPSEED=m
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_HID_THRUSTMASTER is not set
-CONFIG_HID_ZEROPLUS=m
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1271,10 +1326,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
@@ -1286,9 +1339,7 @@ CONFIG_USB_DEVICE_CLASS=y
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_XHCI_HCD is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -1351,20 +1402,17 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1390,10 +1438,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_MMC_SDHCI=m
 # CONFIG_MMC_SDHCI_PCI is not set
 CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MMC_CB710 is not set
 # CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1460,23 +1505,21 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
 
 #
 # DMA Devices
 #
+# CONFIG_TIMB_DMA is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 # CONFIG_UIO_CIF is not set
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
 # CONFIG_UIO_AEC is not set
 # CONFIG_UIO_SERCOS3 is not set
 # CONFIG_UIO_PCI_GENERIC is not set
-
-#
-# TI VLYNQ
-#
+# CONFIG_UIO_NETX is not set
 # CONFIG_STAGING is not set
 
 #
@@ -1556,6 +1599,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1586,6 +1630,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1651,61 +1696,75 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
+# CONFIG_DEBUG_KMEMLEAK_TEST is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE_NMI_ENTER=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_FTRACE_NMI_ENTER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
-CONFIG_IRQSOFF_TRACER=y
-# CONFIG_PREEMPT_TRACER is not set
-CONFIG_SCHED_TRACER=y
-# CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-CONFIG_STACK_TRACER=y
-CONFIG_KMEMTRACE=y
-CONFIG_WORKQUEUE_TRACER=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_DYNAMIC_FTRACE=y
-# CONFIG_FUNCTION_PROFILER is not set
-CONFIG_FTRACE_MCOUNT_RECORD=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_DWARF_UNWINDER=y
-CONFIG_MCOUNT=y
+# CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
+# CONFIG_SH_NO_BSS_INIT is not set
 
 #
 # Security options
@@ -1815,7 +1874,8 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index f196e87..30f38c2 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:09:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:27:53 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,11 +76,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -124,13 +122,13 @@ CONFIG_PROFILING=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -244,8 +242,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -254,6 +252,8 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -269,7 +269,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -287,6 +287,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
+# CONFIG_SPECULATIVE_EXECUTION is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_FPU=y
@@ -344,7 +345,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -359,9 +360,9 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -387,7 +388,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -598,6 +598,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -671,6 +672,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -707,7 +709,7 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -766,6 +768,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -851,6 +854,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -899,6 +903,7 @@ CONFIG_I2C_ALGOPCA=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -912,15 +917,9 @@ CONFIG_I2C_ALGOPCA=y
 #
 CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -943,6 +942,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
@@ -950,12 +950,14 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -963,6 +965,7 @@ CONFIG_MFD_SM501=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1059,6 +1062,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1074,14 +1078,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1182,7 +1191,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1195,7 +1203,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1353,6 +1360,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1383,6 +1391,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1461,6 +1470,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1509,6 +1519,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1633,6 +1644,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index 45441c0..4ba2705 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:10:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:32:23 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -12,8 +12,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,6 +29,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -43,9 +44,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -65,7 +68,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -95,7 +97,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -111,6 +113,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -222,6 +225,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -237,7 +241,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -312,7 +316,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -544,6 +547,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -625,6 +629,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -719,7 +724,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -773,6 +777,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -797,6 +802,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -936,6 +942,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index ecf50cd..42f6bd3 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:10:45 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:08:45 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,6 +28,7 @@ CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_TMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -35,6 +36,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_COHERENT=y
 # CONFIG_DMA_NONCOHERENT is not set
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -49,9 +51,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,15 +77,11 @@ CONFIG_TREE_RCU=y
 CONFIG_RCU_TRACE=y
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
@@ -92,6 +92,7 @@ CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_MEM_RES_CTLR=y
 # CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_MM_OWNER=y
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -131,7 +132,6 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 # CONFIG_PERF_COUNTERS is not set
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
@@ -140,12 +140,10 @@ CONFIG_COMPAT_BRK=y
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -153,6 +151,7 @@ CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -173,7 +172,6 @@ CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 
 #
 # IO Schedulers
@@ -269,8 +267,8 @@ CONFIG_FORCE_MAX_ZONEORDER=7
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=3
@@ -282,6 +280,8 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_MEMORY_PROBE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 # CONFIG_PAGE_SIZE_4KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -307,7 +307,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SCHED_MC=y
@@ -392,14 +392,14 @@ CONFIG_HZ_250=y
 CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SECCOMP=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -518,7 +518,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
@@ -583,6 +582,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -601,6 +601,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -693,6 +694,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -734,6 +736,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -760,6 +763,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -773,15 +777,9 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -838,10 +836,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
@@ -933,7 +930,6 @@ CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -945,7 +941,6 @@ CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -983,6 +978,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1065,8 +1061,6 @@ CONFIG_RTC_DRV_SH=y
 CONFIG_UIO=m
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
 
 #
 # TI VLYNQ
@@ -1145,6 +1139,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1159,6 +1154,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1246,7 +1242,6 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1266,9 +1261,9 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -1276,10 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1292,6 +1284,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1329,6 +1322,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1407,7 +1401,8 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 98352d7..513834d 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:14:18 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:36:53 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -68,7 +71,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -79,6 +81,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -105,7 +108,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
@@ -122,6 +125,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -235,6 +239,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -250,7 +255,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -335,7 +340,6 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -350,9 +354,9 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 
@@ -569,6 +573,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -586,7 +591,7 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -626,6 +631,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -726,6 +732,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -764,6 +771,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -771,6 +779,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -848,7 +857,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -907,6 +915,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -925,6 +934,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -983,6 +993,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 72982e3..14e69a2 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:14:50 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:39:19 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -31,6 +31,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -65,7 +68,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -76,6 +78,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -102,7 +105,7 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
@@ -119,6 +122,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -237,6 +241,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -252,7 +257,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -332,7 +337,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -402,6 +406,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -442,6 +447,7 @@ CONFIG_DEVKMEM=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -552,7 +558,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -609,6 +614,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -676,6 +682,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 78c2570..79196b4 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:17:20 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 17:41:12 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -32,6 +32,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,9 +47,11 @@ CONFIG_LOCALVERSION=""
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -71,7 +74,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -82,6 +84,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -109,8 +112,9 @@ CONFIG_PERF_USE_VMALLOC=y
 #
 # Kernel Performance Events And Counters
 #
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
 # CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_COMPAT_BRK=y
@@ -127,6 +131,7 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -245,6 +250,7 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -260,7 +266,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -345,7 +351,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
-# CONFIG_SPARSE_IRQ is not set
 
 #
 # Boot options
@@ -361,9 +366,9 @@ CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -392,7 +397,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -561,6 +565,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATM is not set
 CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -749,6 +754,7 @@ CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -768,10 +774,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 # CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
@@ -802,6 +804,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -892,7 +895,7 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -951,6 +954,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -1002,6 +1006,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -1014,6 +1020,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -1040,6 +1047,7 @@ CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
 # CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 CONFIG_USB_NET_NET1080=m
@@ -1049,6 +1057,7 @@ CONFIG_USB_NET_PLUSB=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_USB_NET_ZAURUS=m
 # CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -1136,6 +1145,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1215,6 +1225,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1222,6 +1233,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1372,6 +1384,7 @@ CONFIG_USB_SERIAL_ARK3116=m
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
 # CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1385,6 +1398,7 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1397,7 +1411,6 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1410,7 +1423,6 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1552,6 +1564,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1585,6 +1598,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
@@ -1680,6 +1694,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1726,6 +1741,7 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KSYM_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1853,6 +1869,7 @@ CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 4fa03bf..17b7258 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:18:53 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:10:50 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -33,6 +33,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,9 +49,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -73,7 +76,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -84,6 +86,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -122,13 +125,13 @@ CONFIG_PROFILING=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -244,7 +247,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x01f00000
 CONFIG_29BIT=y
-# CONFIG_X2TLB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=1
@@ -255,6 +258,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -278,7 +283,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -352,7 +357,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -388,6 +393,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -395,7 +401,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -473,7 +478,7 @@ CONFIG_CFG80211=y
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
 CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
@@ -619,6 +624,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -709,6 +715,7 @@ CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_MESH is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_WL12XX is not set
@@ -730,6 +737,7 @@ CONFIG_USB_NET_AX8817X=y
 CONFIG_USB_NET_CDCETHER=y
 # CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
@@ -739,6 +747,7 @@ CONFIG_USB_NET_CDCETHER=y
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -800,6 +809,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=1
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
@@ -952,7 +962,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -964,7 +973,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -987,9 +995,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TMIO is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1079,6 +1084,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1104,6 +1110,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1299,6 +1306,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index 23bda19..28bb19d 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan  4 15:27:53 2010
+# Linux kernel version: 2.6.34-rc5
+# Tue May 18 18:13:10 2010
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,8 +13,8 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -35,6 +35,7 @@ CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DMA_COHERENT=y
 # CONFIG_DMA_NONCOHERENT is not set
+# CONFIG_NEED_DMA_MAP_STATE is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -49,9 +50,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -77,11 +80,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
 CONFIG_CGROUP_NS=y
@@ -93,6 +91,9 @@ CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_MEM_RES_CTLR=y
 CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_MM_OWNER=y
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -102,6 +103,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -142,13 +144,13 @@ CONFIG_PROFILING=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
 
 #
 # GCOV-based kernel profiling
@@ -169,7 +171,6 @@ CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_CGROUP is not set
 
 #
 # IO Schedulers
@@ -265,8 +266,8 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
 CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -277,6 +278,8 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -299,7 +302,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
@@ -317,6 +320,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 CONFIG_SH_STORE_QUEUES=y
+# CONFIG_SPECULATIVE_EXECUTION is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEAEX=y
@@ -325,15 +329,14 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+# CONFIG_SH_SDK7786 is not set
 CONFIG_SH_URQUELL=y
 
 #
 # Timer and clock configuration
 #
 CONFIG_SH_TIMER_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
 CONFIG_SH_CLK_CPG=y
-CONFIG_SH_CLK_CPG_LEGACY=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -376,7 +379,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GUSA=y
-CONFIG_SPARSE_IRQ=y
+# CONFIG_INTC_USERIMASK is not set
 
 #
 # Boot options
@@ -391,6 +394,7 @@ CONFIG_ENTRY_OFFSET=0x00001000
 # Bus options
 #
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
 # CONFIG_PCIE_ECRC is not set
@@ -398,7 +402,6 @@ CONFIG_PCIEAER=y
 CONFIG_PCIEASPM=y
 CONFIG_PCIEASPM_DEBUG=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -428,7 +431,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -639,6 +641,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -712,6 +715,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -748,7 +752,7 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -807,6 +811,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -871,6 +876,7 @@ CONFIG_WLAN=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -958,6 +964,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1007,6 +1014,7 @@ CONFIG_I2C_ALGOPCA=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1020,15 +1028,9 @@ CONFIG_I2C_ALGOPCA=y
 #
 CONFIG_I2C_PCA_PLATFORM=y
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -1043,13 +1045,17 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1082,10 +1088,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1123,6 +1130,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1151,21 +1159,26 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
 # CONFIG_MFD_SM501_GPIO is not set
 # CONFIG_MFD_SH_MOBILE_SDHI is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1187,6 +1200,7 @@ CONFIG_VIDEO_IR=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1283,6 +1297,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1298,14 +1313,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1326,7 +1346,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -1405,7 +1424,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1417,7 +1435,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1584,6 +1601,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1610,6 +1628,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1688,6 +1707,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1713,6 +1733,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1846,6 +1867,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_VIRTUALIZATION is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
index 727126e..4a27722 100644
--- a/arch/sh/drivers/dma/dma-api.c
+++ b/arch/sh/drivers/dma/dma-api.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <asm/dma.h>
 
 DEFINE_SPINLOCK(dma_spin_lock);
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 391cbe1..3cee58e 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -40,10 +40,10 @@ static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
 
 static int pvr2_request_dma(struct dma_channel *chan)
 {
-	if (ctrl_inl(PVR2_DMA_MODE) != 0)
+	if (__raw_readl(PVR2_DMA_MODE) != 0)
 		return -EBUSY;
 
-	ctrl_outl(0, PVR2_DMA_LMMODE0);
+	__raw_writel(0, PVR2_DMA_LMMODE0);
 
 	return 0;
 }
@@ -60,9 +60,9 @@ static int pvr2_xfer_dma(struct dma_channel *chan)
 
 	xfer_complete = 0;
 
-	ctrl_outl(chan->dar, PVR2_DMA_ADDR);
-	ctrl_outl(chan->count, PVR2_DMA_COUNT);
-	ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
+	__raw_writel(chan->dar, PVR2_DMA_ADDR);
+	__raw_writel(chan->count, PVR2_DMA_COUNT);
+	__raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE);
 
 	return 0;
 }
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 37fb5b8..8272087 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -52,11 +52,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
  *
  * iterations to complete the transfer.
  */
+static unsigned int ts_shift[] = TS_SHIFT;
 static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
 {
-	u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+	u32 chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
+	int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
+		((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
 
-	return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
+	return ts_shift[cnt];
 }
 
 /*
@@ -70,13 +73,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 	struct dma_channel *chan = dev_id;
 	u32 chcr;
 
-	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+	chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
 
 	if (!(chcr & CHCR_TE))
 		return IRQ_NONE;
 
 	chcr &= ~(CHCR_IE | CHCR_DE);
-	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+	__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	wake_up(&chan->wait_queue);
 
@@ -115,7 +118,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 		chan->flags &= ~DMA_TEI_CAPABLE;
 	}
 
-	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+	__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	chan->flags |= DMA_CONFIGURED;
 	return 0;
@@ -126,13 +129,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
 	int irq;
 	u32 chcr;
 
-	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+	chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
 	chcr |= CHCR_DE;
 
 	if (chan->flags & DMA_TEI_CAPABLE)
 		chcr |= CHCR_IE;
 
-	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+	__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	if (chan->flags & DMA_TEI_CAPABLE) {
 		irq = get_dmte_irq(chan->chan);
@@ -150,9 +153,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
 		disable_irq(irq);
 	}
 
-	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
+	chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR);
 	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
-	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
+	__raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR));
 }
 
 static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +186,12 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 	 */
 	if (chan->sar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
+		__raw_writel(chan->sar, (dma_base_addr[chan->chan]+SAR));
 	if (chan->dar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
+		__raw_writel(chan->dar, (dma_base_addr[chan->chan] + DAR));
 
-	ctrl_outl(chan->count >> calc_xmit_shift(chan),
+	__raw_writel(chan->count >> calc_xmit_shift(chan),
 		(dma_base_addr[chan->chan] + TCR));
 
 	sh_dmac_enable_dma(chan);
@@ -198,10 +201,10 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 
 static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 {
-	if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
+	if (!(__raw_readl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
 		return 0;
 
-	return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+	return __raw_readl(dma_base_addr[chan->chan] + TCR)
 		 << calc_xmit_shift(chan);
 }
 
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 5e22689..6ab9c4a 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -8,6 +8,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <asm/dma.h>
 #include <asm/dmabrg.h>
 #include <asm/io.h>
@@ -86,8 +87,8 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
 	unsigned long dcr;
 	unsigned int i;
 
-	dcr = ctrl_inl(DMABRGCR);
-	ctrl_outl(dcr & ~0x00ff0003, DMABRGCR);	/* ack all */
+	dcr = __raw_readl(DMABRGCR);
+	__raw_writel(dcr & ~0x00ff0003, DMABRGCR);	/* ack all */
 	dcr &= dcr >> 8;	/* ignore masked */
 
 	/* USB stuff, get it out of the way first */
@@ -109,17 +110,17 @@ static irqreturn_t dmabrg_irq(int irq, void *data)
 static void dmabrg_disable_irq(unsigned int dmairq)
 {
 	unsigned long dcr;
-	dcr = ctrl_inl(DMABRGCR);
+	dcr = __raw_readl(DMABRGCR);
 	dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
-	ctrl_outl(dcr, DMABRGCR);
+	__raw_writel(dcr, DMABRGCR);
 }
 
 static void dmabrg_enable_irq(unsigned int dmairq)
 {
 	unsigned long dcr;
-	dcr = ctrl_inl(DMABRGCR);
+	dcr = __raw_readl(DMABRGCR);
 	dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8));
-	ctrl_outl(dcr, DMABRGCR);
+	__raw_writel(dcr, DMABRGCR);
 }
 
 int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*),
@@ -165,13 +166,13 @@ static int __init dmabrg_init(void)
 		printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
 #endif
 
-	ctrl_outl(0, DMABRGCR);
-	ctrl_outl(0, DMACHCR0);
-	ctrl_outl(0x94000000, DMARSRA);	/* enable DMABRG in DMAC 0 */
+	__raw_writel(0, DMABRGCR);
+	__raw_writel(0, DMACHCR0);
+	__raw_writel(0x94000000, DMARSRA);	/* enable DMABRG in DMAC 0 */
 
 	/* enable DMABRG mode, enable the DMAC */
-	or = ctrl_inl(DMAOR);
-	ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
+	or = __raw_readl(DMAOR);
+	__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
 
 	ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
 			"DMABRG USB address error", NULL);
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index a9339a6..7efc9c3 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -1,7 +1,7 @@
 /*
  * Generic heartbeat driver for regular LED banks
  *
- * Copyright (C) 2007  Paul Mundt
+ * Copyright (C) 2007 - 2010  Paul Mundt
  *
  * Most SH reference boards include a number of individual LEDs that can
  * be independently controlled (either via a pre-defined hardware
@@ -24,10 +24,11 @@
 #include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <asm/heartbeat.h>
 
 #define DRV_NAME "heartbeat"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.2"
 
 static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
 
@@ -98,7 +99,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 			return -ENOMEM;
 	}
 
-	hd->base = ioremap_nocache(res->start, res->end - res->start + 1);
+	hd->base = ioremap_nocache(res->start, resource_size(res));
 	if (unlikely(!hd->base)) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 
@@ -117,8 +118,20 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 	for (i = 0; i < hd->nr_bits; i++)
 		hd->mask |= (1 << hd->bit_pos[i]);
 
-	if (!hd->regsize)
-		hd->regsize = 8;	/* default access size */
+	if (!hd->regsize) {
+		switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+		case IORESOURCE_MEM_32BIT:
+			hd->regsize = 32;
+			break;
+		case IORESOURCE_MEM_16BIT:
+			hd->regsize = 16;
+			break;
+		case IORESOURCE_MEM_8BIT:
+		default:
+			hd->regsize = 8;
+			break;
+		}
+	}
 
 	setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
 	platform_set_drvdata(pdev, hd);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 08af1f4..4a59e68 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,14 +1,14 @@
 #
 # Makefile for the PCI specific kernel interface routines under Linux.
 #
-obj-y					+= pci.o
+obj-y					+= common.o pci.o
 
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= ops-sh7786.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= pcie-sh7786.o ops-sh7786.o
 obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
@@ -25,4 +25,3 @@ obj-$(CONFIG_SH_TITAN)			+= fixups-titan.o
 obj-$(CONFIG_SH_LANDISK)		+= fixups-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= fixups-rts7751r2d.o
 obj-$(CONFIG_SH_CAYMAN)			+= fixups-cayman.o
-obj-$(CONFIG_SH_URQUELL)		+= pcie-sh7786.o
diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c
new file mode 100644
index 0000000..dbf1381
--- /dev/null
+++ b/arch/sh/drivers/pci/common.c
@@ -0,0 +1,162 @@
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
+	int top_bus, int busnr, int devfn)
+{
+	static struct pci_dev dev;
+	static struct pci_bus bus;
+
+	dev.bus = &bus;
+	dev.sysdata = hose;
+	dev.devfn = devfn;
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose->pci_ops;
+
+	if(busnr != top_bus)
+		/* Fake a parent bus structure. */
+		bus.parent = &bus;
+	else
+		bus.parent = NULL;
+
+	return &dev;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int __init early_##rw##_config_##size(struct pci_channel *hose,		\
+	int top_bus, int bus, int devfn, int offset, type value)	\
+{									\
+	return pci_##rw##_config_##size(				\
+		fake_pci_dev(hose, top_bus, bus, devfn),		\
+		offset, value);						\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int __init pci_is_66mhz_capable(struct pci_channel *hose,
+				int top_bus, int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+
+	return cap66 > 0;
+}
+
+static void pcibios_enable_err(unsigned long __data)
+{
+	struct pci_channel *hose = (struct pci_channel *)__data;
+
+	del_timer(&hose->err_timer);
+	printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
+	enable_irq(hose->err_irq);
+}
+
+static void pcibios_enable_serr(unsigned long __data)
+{
+	struct pci_channel *hose = (struct pci_channel *)__data;
+
+	del_timer(&hose->serr_timer);
+	printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
+	enable_irq(hose->serr_irq);
+}
+
+void pcibios_enable_timers(struct pci_channel *hose)
+{
+	if (hose->err_irq) {
+		init_timer(&hose->err_timer);
+		hose->err_timer.data = (unsigned long)hose;
+		hose->err_timer.function = pcibios_enable_err;
+	}
+
+	if (hose->serr_irq) {
+		init_timer(&hose->serr_timer);
+		hose->serr_timer.data = (unsigned long)hose;
+		hose->serr_timer.function = pcibios_enable_serr;
+	}
+}
+
+/*
+ * A simple handler for the regular PCI status errors, called from IRQ
+ * context.
+ */
+unsigned int pcibios_handle_status_errors(unsigned long addr,
+					  unsigned int status,
+					  struct pci_channel *hose)
+{
+	unsigned int cmd = 0;
+
+	if (status & PCI_STATUS_REC_MASTER_ABORT) {
+		printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
+		cmd |= PCI_STATUS_REC_MASTER_ABORT;
+	}
+
+	if (status & PCI_STATUS_REC_TARGET_ABORT) {
+		printk(KERN_DEBUG "PCI: target abort: ");
+		pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT |
+				      PCI_STATUS_SIG_TARGET_ABORT |
+				      PCI_STATUS_REC_MASTER_ABORT, 1);
+		printk("\n");
+
+		cmd |= PCI_STATUS_REC_TARGET_ABORT;
+	}
+
+	if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) {
+		printk(KERN_DEBUG "PCI: parity error detected: ");
+		pcibios_report_status(PCI_STATUS_PARITY |
+				      PCI_STATUS_DETECTED_PARITY, 1);
+		printk("\n");
+
+		cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY;
+
+		/* Now back off of the IRQ for awhile */
+		if (hose->err_irq) {
+			disable_irq_nosync(hose->err_irq);
+			hose->err_timer.expires = jiffies + HZ;
+			add_timer(&hose->err_timer);
+		}
+	}
+
+	return cmd;
+}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index ed7f489..942ef4f 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -39,7 +39,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev)
 		/*
 		 * We also assume that dev->devfn == 0
 		 */
-		dev->resource[1].start	= p->io_resource->start  + 0x100;
+		dev->resource[1].start	= p->resources[0].start  + 0x100;
 		dev->resource[1].end	= dev->resource[1].start + 0x200 - 1;
 
 		/*
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 15ca65c..08b2d86 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	return irq_tab[slot];
 }
-
-int pci_fixup_pcic(struct pci_channel *chan)
-{
-	pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
-	pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
-	pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
-	pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
-	pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
-	pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 7898f14..e248516 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -43,7 +43,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
 {
 	unsigned long bcr1, mcr;
 
-	bcr1 = ctrl_inl(SH7751_BCR1);
+	bcr1 = __raw_readl(SH7751_BCR1);
 	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
 	pci_write_reg(chan, bcr1, SH4_PCIBCR1);
 
@@ -54,7 +54,7 @@ int pci_fixup_pcic(struct pci_channel *chan)
 	pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
 	pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
 
-	mcr = ctrl_inl(SH7751_MCR);
+	mcr = __raw_readl(SH7751_MCR);
 	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
 	pci_write_reg(chan, mcr, SH4_PCIMCR);
 
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 250b0ed..0930f98 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
        return sdk7780_irq_tab[pin-1][slot];
 }
-int pci_fixup_pcic(struct pci_channel *chan)
-{
-	/* Enable all interrupts, so we know what to fix */
-	pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
-
-	/* Set up standard PCI config registers */
-	pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0);	/* PCI */
-	pci_write_reg(chan, 0x08000000, SH4_PCILAR0);	/* SHwy */
-	pci_write_reg(chan, 0x07F00001, SH4_PCILSR0);	/* size 128M w/ MBAR */
-
-	pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
-	pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
-	pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
-
-	pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
-	pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
-
-	return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
index 475fa9f..a4c7d3a 100644
--- a/arch/sh/drivers/pci/fixups-se7751.c
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -97,12 +97,12 @@ int pci_fixup_pcic(struct pci_channel *chan)
 	* meaning all calls go straight through... use BUG_ON to
 	* catch erroneous assumption.
 	*/
-	BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+	BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
 
-	PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+	PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
 
 	/* Set IOBR for window containing area specified in pci.h */
-	PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+	PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
 
 	/* All done, may as well say so... */
 	printk("SH7751 PCI: Finished initialization of the PCI controller\n");
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 78bebeb..0b81999 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -16,7 +16,7 @@
  * Direct access to PCI hardware...
  */
 #define CONFIG_CMD(bus, devfn, where) \
-	(P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
+	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
 
 static DEFINE_SPINLOCK(sh4_pci_lock);
 
@@ -102,34 +102,6 @@ struct pci_ops sh4_pci_ops = {
 	.write		= sh4_pci_write,
 };
 
-/*
- * Not really related to pci_ops, but it's common and not worth shoving
- * somewhere else for now..
- */
-int __init sh4_pci_check_direct(struct pci_channel *chan)
-{
-	/*
-	 * Check if configuration works.
-	 */
-	unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
-
-	pci_write_reg(chan, P1SEG, SH4_PCIPAR);
-
-	if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
-		pci_write_reg(chan, tmp, SH4_PCIPAR);
-		printk(KERN_INFO "PCI: Using configuration type 1\n");
-		request_region(chan->reg_base + SH4_PCIPAR, 8,
-			       "PCI conf1");
-		return 0;
-	}
-
-	pci_write_reg(chan, tmp, SH4_PCIPAR);
-
-	printk(KERN_ERR "PCI: %s failed\n", __func__);
-
-	return -EINVAL;
-}
-
 int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
 {
 	/* Nothing to do. */
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
index 210f9d4..6336941 100644
--- a/arch/sh/drivers/pci/pci-dreamcast.c
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -25,25 +25,25 @@
 #include <asm/irq.h>
 #include <mach/pci.h>
 
-static struct resource gapspci_io_resource = {
-	.name	= "GAPSPCI IO",
-	.start	= GAPSPCI_BBA_CONFIG,
-	.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
-	.name	= "GAPSPCI mem",
-	.start	= GAPSPCI_DMA_BASE,
-	.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
+static struct resource gapspci_resources[] = {
+	{
+		.name	= "GAPSPCI IO",
+		.start	= GAPSPCI_BBA_CONFIG,
+		.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+		.flags	= IORESOURCE_IO,
+	},  {
+		.name	= "GAPSPCI mem",
+		.start	= GAPSPCI_DMA_BASE,
+		.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
 };
 
 static struct pci_channel dreamcast_pci_controller = {
 	.pci_ops	= &gapspci_pci_ops,
-	.io_resource	= &gapspci_io_resource,
+	.resources	= gapspci_resources,
+	.nr_resources	= ARRAY_SIZE(gapspci_resources),
 	.io_offset	= 0x00000000,
-	.mem_resource	= &gapspci_mem_resource,
 	.mem_offset	= 0x00000000,
 };
 
@@ -95,8 +95,6 @@ static int __init gapspci_init(void)
 	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
 	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
 
-	register_pci_controller(&dreamcast_pci_controller);
-
-	return 0;
+	return register_pci_controller(&dreamcast_pci_controller);
 }
 arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 3d5296c..cbf763b 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -49,6 +49,17 @@
   #define SH4_PCIINT_MWPD	  0x00000002	/* Master Write PERR Detect */
   #define SH4_PCIINT_MRPD	  0x00000001	/* Master Read PERR Detect */
 #define SH4_PCIINTM		0x118		/* PCI Interrupt Mask */
+  #define SH4_PCIINTM_TTADIM	  BIT(14)	/* Target-target abort interrupt */
+  #define SH4_PCIINTM_TMTOIM	  BIT(9)	/* Target retry timeout */
+  #define SH4_PCIINTM_MDEIM	  BIT(8)	/* Master function disable error */
+  #define SH4_PCIINTM_APEDIM	  BIT(7)	/* Address parity error detection */
+  #define SH4_PCIINTM_SDIM	  BIT(6)	/* SERR detection */
+  #define SH4_PCIINTM_DPEITWM	  BIT(5)	/* Data parity error for target write */
+  #define SH4_PCIINTM_PEDITRM	  BIT(4)	/* PERR detection for target read */
+  #define SH4_PCIINTM_TADIMM	  BIT(3)	/* Target abort for master */
+  #define SH4_PCIINTM_MADIMM	  BIT(2)	/* Master abort for master */
+  #define SH4_PCIINTM_MWPDIM	  BIT(1)	/* Master write data parity error */
+  #define SH4_PCIINTM_MRDPEIM	  BIT(0)	/* Master read data parity error */
 #define SH4_PCIALR		0x11C		/* Error Address Register */
 #define SH4_PCICLR		0x120		/* Error Command/Data */
   #define SH4_PCICLR_MPIO	  0x80000000
@@ -61,7 +72,7 @@
 #define SH4_PCIAINT		0x130		/* Arbiter Interrupt Register */
   #define SH4_PCIAINT_MBKN	  0x00002000	/* Master Broken Interrupt */
   #define SH4_PCIAINT_TBTO	  0x00001000	/* Target Bus Time Out */
-  #define SH4_PCIAINT_MBTO	  0x00001000	/* Master Bus Time Out */
+  #define SH4_PCIAINT_MBTO	  0x00000800	/* Master Bus Time Out */
   #define SH4_PCIAINT_TABT	  0x00000008	/* Target Abort */
   #define SH4_PCIAINT_MABT	  0x00000004	/* Master Abort */
   #define SH4_PCIAINT_RDPE	  0x00000002	/* Read Data Parity Error */
@@ -151,7 +162,6 @@
 
 /* arch/sh/kernel/drivers/pci/ops-sh4.c */
 extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(struct pci_channel *chan);
 int pci_fixup_pcic(struct pci_channel *chan);
 
 struct sh4_pci_address_space {
@@ -167,13 +177,13 @@ struct sh4_pci_address_map {
 static inline void pci_write_reg(struct pci_channel *chan,
 				 unsigned long val, unsigned long reg)
 {
-	ctrl_outl(val, chan->reg_base + reg);
+	__raw_writel(val, chan->reg_base + reg);
 }
 
 static inline unsigned long pci_read_reg(struct pci_channel *chan,
 					 unsigned long reg)
 {
-	return ctrl_inl(chan->reg_base + reg);
+	return __raw_readl(chan->reg_base + reg);
 }
 
 #endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 873ed2b..0bf296c 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,14 +89,13 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct resource sh5_io_resource = { /* place holder */ };
-static struct resource sh5_mem_resource = { /* place holder */ };
+static struct resource sh5_pci_resources[2];
 
 static struct pci_channel sh5pci_controller = {
 	.pci_ops		= &sh5_pci_ops,
-	.mem_resource		= &sh5_mem_resource,
+	.resources		= sh5_pci_resources,
+	.nr_resources		= ARRAY_SIZE(sh5_pci_resources),
 	.mem_offset		= 0x00000000,
-	.io_resource		= &sh5_io_resource,
 	.io_offset		= 0x00000000,
 };
 
@@ -210,14 +209,12 @@ static int __init sh5pci_init(void)
         SH5PCI_WRITE(AINTM, ~0);
         SH5PCI_WRITE(PINTM, ~0);
 
-	sh5_io_resource.start = PCI_IO_AREA;
-	sh5_io_resource.end = PCI_IO_AREA + 0x10000;
+	sh5_pci_resources[0].start = PCI_IO_AREA;
+	sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000;
 
-	sh5_mem_resource.start = memStart;
-	sh5_mem_resource.end = memStart + memSize;
+	sh5_pci_resources[1].start = memStart;
+	sh5_pci_resources[1].end = memStart + memSize;
 
-	register_pci_controller(&sh5pci_controller);
-
-	return 0;
+	return register_pci_controller(&sh5pci_controller);
 }
 arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index f277628..3f01dec 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -86,14 +86,14 @@ extern unsigned long pcicr_virt;
 /* #define PCISH5_VCR_REG(x)                ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
 
 /* Write I/O functions */
-#define SH5PCI_WRITE(reg,val)        ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val)  ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val)   ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE(reg,val)        __raw_writel((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val)  __raw_writew((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val)   __raw_writeb((u8)(val),PCISH5_ICR_REG(reg))
 
 /* Read I/O functions */
-#define SH5PCI_READ(reg)             ctrl_inl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg)       ctrl_inw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg)        ctrl_inb(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ(reg)             __raw_readl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg)       __raw_readw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg)        __raw_readb(PCISH5_ICR_REG(reg))
 
 /* Set PCI config bits */
 #define SET_CONFIG_BITS(bus,devfn,where)  ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 70c1999..f98141b 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include "pci-sh4.h"
 #include <asm/addrspace.h>
+#include <asm/sizes.h>
 
 static int __init __area_sdram_check(struct pci_channel *chan,
 				     unsigned int area)
@@ -44,25 +45,25 @@ static int __init __area_sdram_check(struct pci_channel *chan,
 	return 1;
 }
 
-static struct resource sh7751_io_resource = {
-	.name	= "SH7751_IO",
-	.start	= SH7751_PCI_IO_BASE,
-	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name	= "SH7751_mem",
-	.start	= SH7751_PCI_MEMORY_BASE,
-	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
+static struct resource sh7751_pci_resources[] = {
+	{
+		.name	= "SH7751_IO",
+		.start	= 0x1000,
+		.end	= SZ_4M - 1,
+		.flags	= IORESOURCE_IO
+	}, {
+		.name	= "SH7751_mem",
+		.start	= SH7751_PCI_MEMORY_BASE,
+		.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM
+	},
 };
 
 static struct pci_channel sh7751_pci_controller = {
 	.pci_ops	= &sh4_pci_ops,
-	.mem_resource	= &sh7751_mem_resource,
+	.resources	= sh7751_pci_resources,
+	.nr_resources	= ARRAY_SIZE(sh7751_pci_resources),
 	.mem_offset	= 0x00000000,
-	.io_resource	= &sh7751_io_resource,
 	.io_offset	= 0x00000000,
 	.io_map_base	= SH7751_PCI_IO_BASE,
 };
@@ -79,7 +80,6 @@ static int __init sh7751_pci_init(void)
 	struct pci_channel *chan = &sh7751_pci_controller;
 	unsigned int id;
 	u32 word, reg;
-	int ret;
 
 	printk(KERN_NOTICE "PCI: Starting intialization.\n");
 
@@ -93,13 +93,10 @@ static int __init sh7751_pci_init(void)
 		return -ENODEV;
 	}
 
-	if ((ret = sh4_pci_check_direct(chan)) != 0)
-		return ret;
-
 	/* Set the BCR's to enable PCI access */
-	reg = ctrl_inl(SH7751_BCR1);
+	reg = __raw_readl(SH7751_BCR1);
 	reg |= 0x80000;
-	ctrl_outl(reg, SH7751_BCR1);
+	__raw_writel(reg, SH7751_BCR1);
 
 	/* Turn the clocks back on (not done in reset)*/
 	pci_write_reg(chan, 0, SH4_PCICLKR);
@@ -132,13 +129,13 @@ static int __init sh7751_pci_init(void)
 	/* Set the local 16MB PCI memory space window to
 	 * the lowest PCI mapped address
 	 */
-	word = chan->mem_resource->start & SH4_PCIMBR_MASK;
+	word = chan->resources[1].start & SH4_PCIMBR_MASK;
 	pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
 	pci_write_reg(chan, word , SH4_PCIMBR);
 
 	/* Make sure the MSB's of IO window are set to access PCI space
 	 * correctly */
-	word = chan->io_resource->start & SH4_PCIIOBR_MASK;
+	word = chan->resources[0].start & SH4_PCIIOBR_MASK;
 	pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
 	pci_write_reg(chan, word, SH4_PCIIOBR);
 
@@ -159,13 +156,13 @@ static int __init sh7751_pci_init(void)
 		return -1;
 
 	/* configure the wait control registers */
-	word = ctrl_inl(SH7751_WCR1);
+	word = __raw_readl(SH7751_WCR1);
 	pci_write_reg(chan, word, SH4_PCIWCR1);
-	word = ctrl_inl(SH7751_WCR2);
+	word = __raw_readl(SH7751_WCR2);
 	pci_write_reg(chan, word, SH4_PCIWCR2);
-	word = ctrl_inl(SH7751_WCR3);
+	word = __raw_readl(SH7751_WCR3);
 	pci_write_reg(chan, word, SH4_PCIWCR3);
-	word = ctrl_inl(SH7751_MCR);
+	word = __raw_readl(SH7751_MCR);
 	pci_write_reg(chan, word, SH4_PCIMCR);
 
 	/* NOTE: I'm ignoring the PCI error IRQs for now..
@@ -180,8 +177,6 @@ static int __init sh7751_pci_init(void)
 	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
 	pci_write_reg(chan, word, SH4_PCICR);
 
-	register_pci_controller(chan);
-
-	return 0;
+	return register_pci_controller(chan);
 }
 arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 323b92d..ffdcbf1 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,7 +1,7 @@
 /*
  * Low-Level PCI Support for the SH7780
  *
- *  Copyright (C) 2005 - 2009  Paul Mundt
+ *  Copyright (C) 2005 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -11,52 +11,240 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/log2.h>
 #include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
 
-static struct resource sh7785_io_resource = {
-	.name	= "SH7785_IO",
-	.start	= SH7780_PCI_IO_BASE,
-	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
-	.name	= "SH7785_mem",
-	.start	= SH7780_PCI_MEMORY_BASE,
-	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
+static struct resource sh7785_pci_resources[] = {
+	{
+		.name	= "PCI IO",
+		.start	= 0x1000,
+		.end	= SZ_4M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCI MEM 0",
+		.start	= 0xfd000000,
+		.end	= 0xfd000000 + SZ_16M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "PCI MEM 1",
+		.start	= 0x10000000,
+		.end	= 0x10000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/*
+		 * 32-bit only resources must be last.
+		 */
+		.name	= "PCI MEM 2",
+		.start	= 0xc0000000,
+		.end	= 0xc0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	},
 };
 
 static struct pci_channel sh7780_pci_controller = {
 	.pci_ops	= &sh4_pci_ops,
-	.mem_resource	= &sh7785_mem_resource,
-	.mem_offset	= 0x00000000,
-	.io_resource	= &sh7785_io_resource,
-	.io_offset	= 0x00000000,
-	.io_map_base	= SH7780_PCI_IO_BASE,
+	.resources	= sh7785_pci_resources,
+	.nr_resources	= ARRAY_SIZE(sh7785_pci_resources),
+	.io_offset	= 0,
+	.mem_offset	= 0,
+	.io_map_base	= 0xfe200000,
+	.serr_irq	= evt2irq(0xa00),
+	.err_irq	= evt2irq(0xaa0),
 };
 
-static struct sh4_pci_address_map sh7780_pci_map = {
-	.window0	= {
-#if defined(CONFIG_32BIT)
-		.base	= SH7780_32BIT_DDR_BASE_ADDR,
-		.size	= 0x40000000,
-#else
-		.base	= SH7780_CS0_BASE_ADDR,
-		.size	= 0x20000000,
-#endif
-	},
+struct pci_errors {
+	unsigned int	mask;
+	const char	*str;
+} pci_arbiter_errors[] = {
+	{ SH4_PCIAINT_MBKN,	"master broken" },
+	{ SH4_PCIAINT_TBTO,	"target bus time out" },
+	{ SH4_PCIAINT_MBTO,	"master bus time out" },
+	{ SH4_PCIAINT_TABT,	"target abort" },
+	{ SH4_PCIAINT_MABT,	"master abort" },
+	{ SH4_PCIAINT_RDPE,	"read data parity error" },
+	{ SH4_PCIAINT_WDPE,	"write data parity error" },
+}, pci_interrupt_errors[] = {
+	{ SH4_PCIINT_MLCK,	"master lock error" },
+	{ SH4_PCIINT_TABT,	"target-target abort" },
+	{ SH4_PCIINT_TRET,	"target retry time out" },
+	{ SH4_PCIINT_MFDE,	"master function disable erorr" },
+	{ SH4_PCIINT_PRTY,	"address parity error" },
+	{ SH4_PCIINT_SERR,	"SERR" },
+	{ SH4_PCIINT_TWDP,	"data parity error for target write" },
+	{ SH4_PCIINT_TRDP,	"PERR detected for target read" },
+	{ SH4_PCIINT_MTABT,	"target abort for master" },
+	{ SH4_PCIINT_MMABT,	"master abort for master" },
+	{ SH4_PCIINT_MWPD,	"master write data parity error" },
+	{ SH4_PCIINT_MRPD,	"master read data parity error" },
 };
 
+static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
+{
+	struct pci_channel *hose = dev_id;
+	unsigned long addr;
+	unsigned int status;
+	unsigned int cmd;
+	int i;
+
+	addr = __raw_readl(hose->reg_base + SH4_PCIALR);
+
+	/*
+	 * Handle status errors.
+	 */
+	status = __raw_readw(hose->reg_base + PCI_STATUS);
+	if (status & (PCI_STATUS_PARITY |
+		      PCI_STATUS_DETECTED_PARITY |
+		      PCI_STATUS_SIG_TARGET_ABORT |
+		      PCI_STATUS_REC_TARGET_ABORT |
+		      PCI_STATUS_REC_MASTER_ABORT)) {
+		cmd = pcibios_handle_status_errors(addr, status, hose);
+		if (likely(cmd))
+			__raw_writew(cmd, hose->reg_base + PCI_STATUS);
+	}
+
+	/*
+	 * Handle arbiter errors.
+	 */
+	status = __raw_readl(hose->reg_base + SH4_PCIAINT);
+	for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
+		if (status & pci_arbiter_errors[i].mask) {
+			printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+			       pci_arbiter_errors[i].str, addr);
+			cmd |= pci_arbiter_errors[i].mask;
+		}
+	}
+	__raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
+
+	/*
+	 * Handle the remaining PCI errors.
+	 */
+	status = __raw_readl(hose->reg_base + SH4_PCIINT);
+	for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
+		if (status & pci_interrupt_errors[i].mask) {
+			printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+			       pci_interrupt_errors[i].str, addr);
+			cmd |= pci_interrupt_errors[i].mask;
+		}
+	}
+	__raw_writel(cmd, hose->reg_base + SH4_PCIINT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
+{
+	struct pci_channel *hose = dev_id;
+
+	printk(KERN_DEBUG "PCI: system error received: ");
+	pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
+	printk("\n");
+
+	/* Deassert SERR */
+	__raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
+
+	/* Back off the IRQ for awhile */
+	disable_irq_nosync(irq);
+	hose->serr_timer.expires = jiffies + HZ;
+	add_timer(&hose->serr_timer);
+
+	return IRQ_HANDLED;
+}
+
+static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
+{
+	int ret;
+
+	/* Clear out PCI arbiter IRQs */
+	__raw_writel(0, hose->reg_base + SH4_PCIAINT);
+
+	/* Clear all error conditions */
+	__raw_writew(PCI_STATUS_DETECTED_PARITY  | \
+		     PCI_STATUS_SIG_SYSTEM_ERROR | \
+		     PCI_STATUS_REC_MASTER_ABORT | \
+		     PCI_STATUS_REC_TARGET_ABORT | \
+		     PCI_STATUS_SIG_TARGET_ABORT | \
+		     PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
+
+	ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+			  "PCI SERR interrupt", hose);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
+		return ret;
+	}
+
+	/*
+	 * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
+	 * down IRQ vectors are routed through the ERR IRQ vector. We
+	 * only request_irq() once as there is only a single masking
+	 * source for multiple events.
+	 */
+	ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
+			  "PCI ERR interrupt", hose);
+	if (unlikely(ret)) {
+		free_irq(hose->serr_irq, hose);
+		return ret;
+	}
+
+	/* Unmask all of the arbiter IRQs. */
+	__raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+		     SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+		     SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
+
+	/* Unmask all of the PCI IRQs */
+	__raw_writel(SH4_PCIINTM_TTADIM  | SH4_PCIINTM_TMTOIM  | \
+		     SH4_PCIINTM_MDEIM   | SH4_PCIINTM_APEDIM  | \
+		     SH4_PCIINTM_SDIM    | SH4_PCIINTM_DPEITWM | \
+		     SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM  | \
+		     SH4_PCIINTM_MADIMM  | SH4_PCIINTM_MWPDIM  | \
+		     SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
+
+	return ret;
+}
+
+static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
+{
+	free_irq(hose->err_irq, hose);
+	free_irq(hose->serr_irq, hose);
+}
+
+static void __init sh7780_pci66_init(struct pci_channel *hose)
+{
+	unsigned int tmp;
+
+	if (!pci_is_66mhz_capable(hose, 0, 0))
+		return;
+
+	/* Enable register access */
+	tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+	tmp |= SH4_PCICR_PREFIX;
+	__raw_writel(tmp, hose->reg_base + SH4_PCICR);
+
+	/* Enable 66MHz operation */
+	tmp = __raw_readw(hose->reg_base + PCI_STATUS);
+	tmp |= PCI_STATUS_66MHZ;
+	__raw_writew(tmp, hose->reg_base + PCI_STATUS);
+
+	/* Done */
+	tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+	tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
+	__raw_writel(tmp, hose->reg_base + SH4_PCICR);
+}
+
 static int __init sh7780_pci_init(void)
 {
 	struct pci_channel *chan = &sh7780_pci_controller;
+	phys_addr_t memphys;
+	size_t memsize;
 	unsigned int id;
-	const char *type = NULL;
-	int ret;
-	u32 word;
+	const char *type;
+	int ret, i;
 
 	printk(KERN_NOTICE "PCI: Starting intialization.\n");
 
@@ -65,17 +253,28 @@ static int __init sh7780_pci_init(void)
 	/* Enable CPU access to the PCIC registers. */
 	__raw_writel(PCIECR_ENBL, PCIECR);
 
-	id = __raw_readw(chan->reg_base + SH7780_PCIVID);
-	if (id != SH7780_VENDOR_ID) {
+	/* Reset */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
+		     chan->reg_base + SH4_PCICR);
+
+	/*
+	 * Wait for it to come back up. The spec says to allow for up to
+	 * 1 second after toggling the reset pin, but in practice 100ms
+	 * is more than enough.
+	 */
+	mdelay(100);
+
+	id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+	if (id != PCI_VENDOR_ID_RENESAS) {
 		printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
 		return -ENODEV;
 	}
 
-	id = __raw_readw(chan->reg_base + SH7780_PCIDID);
-	type = (id == SH7763_DEVICE_ID)	? "SH7763" :
-	       (id == SH7780_DEVICE_ID) ? "SH7780" :
-	       (id == SH7781_DEVICE_ID) ? "SH7781" :
-	       (id == SH7785_DEVICE_ID) ? "SH7785" :
+	id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+	type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+	       (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
 					  NULL;
 	if (unlikely(!type)) {
 		printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@@ -85,62 +284,119 @@ static int __init sh7780_pci_init(void)
 
 	printk(KERN_NOTICE "PCI: Found a Renesas %s host "
 	       "controller, revision %d.\n", type,
-	       __raw_readb(chan->reg_base + SH7780_PCIRID));
+	       __raw_readb(chan->reg_base + PCI_REVISION_ID));
 
-	if ((ret = sh4_pci_check_direct(chan)) != 0)
+	/*
+	 * Now throw it in to register initialization mode and
+	 * start the real work.
+	 */
+	__raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
+
+	memphys = __pa(memory_start);
+	memsize = roundup_pow_of_two(memory_end - memory_start);
+
+	/*
+	 * If there's more than 512MB of memory, we need to roll over to
+	 * LAR1/LSR1.
+	 */
+	if (memsize > SZ_512M) {
+		__raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
+		__raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
+			     chan->reg_base + SH4_PCILSR1);
+		memsize = SZ_512M;
+	} else {
+		/*
+		 * Otherwise just zero it out and disable it.
+		 */
+		__raw_writel(0, chan->reg_base + SH4_PCILAR1);
+		__raw_writel(0, chan->reg_base + SH4_PCILSR1);
+	}
+
+	/*
+	 * LAR0/LSR0 covers up to the first 512MB, which is enough to
+	 * cover all of lowmem on most platforms.
+	 */
+	__raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+	__raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
+		     chan->reg_base + SH4_PCILSR0);
+
+	/*
+	 * Hook up the ERR and SERR IRQs.
+	 */
+	ret = sh7780_pci_setup_irqs(chan);
+	if (unlikely(ret))
 		return ret;
 
 	/*
-	 * Set the class and sub-class codes.
+	 * Disable the cache snoop controller for non-coherent DMA.
 	 */
-	__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
-		     chan->reg_base + SH7780_PCIBCC);
-	__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
-		     chan->reg_base + SH7780_PCISUB);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+	__raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
 
 	/*
-	 * Set IO and Mem windows to local address
-	 * Make PCI and local address the same for easy 1 to 1 mapping
+	 * Setup the memory BARs
 	 */
-	pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
-	/* Set the values on window 0 PCI config registers */
-	pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
-	pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
+	for (i = 1; i < chan->nr_resources; i++) {
+		struct resource *res = chan->resources + i;
+		resource_size_t size;
 
-	pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+		if (unlikely(res->flags & IORESOURCE_IO))
+			continue;
 
-	/* Set up standard PCI config registers */
-	__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
-	__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
-	__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
-	__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+		/*
+		 * Make sure we're in the right physical addressing mode
+		 * for dealing with the resource.
+		 */
+		if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
+			chan->nr_resources--;
+			continue;
+		}
 
-	__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
+		size = resource_size(res);
+
+		/*
+		 * The MBMR mask is calculated in units of 256kB, which
+		 * keeps things pretty simple.
+		 */
+		__raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+			     chan->reg_base + SH7780_PCIMBMR(i - 1));
+		__raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
+	}
 
-	/* Apply any last-minute PCIC fixups */
-	pci_fixup_pcic(chan);
+	/*
+	 * And I/O.
+	 */
+	__raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+	__raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
 
-	pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
-	pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+	__raw_writew(PCI_COMMAND_SERR   | PCI_COMMAND_WAIT   | \
+		     PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+		     PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
 
-#ifdef CONFIG_32BIT
-	pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
-	pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+	/*
+	 * Initialization mode complete, release the control register and
+	 * enable round robin mode to stop device overruns/starvation.
+	 */
+	__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
+		     chan->reg_base + SH4_PCICR);
 
-	/* Set IOBR for windows containing area specified in pci.h */
-	pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
-		      SH7780_PCIIOBR);
-	pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
-		      SH7780_PCIIOBMR);
+	ret = register_pci_controller(chan);
+	if (unlikely(ret))
+		goto err;
 
-	/* SH7780 init done, set central function init complete */
-	/* use round robin mode to stop a device starving/overruning */
-	word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
-	pci_write_reg(chan, word, SH4_PCICR);
+	sh7780_pci66_init(chan);
 
-	register_pci_controller(chan);
+	printk(KERN_NOTICE "PCI: Running at %dMHz.\n",
+	       (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ?
+	       66 : 33);
 
 	return 0;
+
+err:
+	sh7780_pci_teardown_irqs(chan);
+	return ret;
 }
 arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 4a52478..205dcbe 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -12,12 +12,11 @@
 #ifndef _PCI_SH7780_H_
 #define _PCI_SH7780_H_
 
-/* Platform Specific Values */
-#define SH7780_VENDOR_ID	0x1912
-#define SH7781_DEVICE_ID	0x0001
-#define SH7780_DEVICE_ID	0x0002
-#define SH7763_DEVICE_ID	0x0004
-#define SH7785_DEVICE_ID	0x0007
+#define PCI_VENDOR_ID_RENESAS		0x1912
+#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
+#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
+#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
+#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
 
 /* SH7780 Control Registers */
 #define	PCIECR			0xFE000008
@@ -27,44 +26,9 @@
 #define SH7780_PCI_CONFIG_BASE	0xFD000000	/* Config space base addr */
 #define SH7780_PCI_CONFIG_SIZE	0x01000000	/* Config space size */
 
-#define SH7780_PCI_MEMORY_BASE	0xFD000000	/* Memory space base addr */
-#define SH7780_PCI_MEM_SIZE	0x01000000	/* Size of Memory window */
-
-#define SH7780_PCI_IO_BASE	0xFE200000	/* IO space base address */
-#define SH7780_PCI_IO_SIZE	0x00400000	/* Size of IO window */
-
 #define SH7780_PCIREG_BASE	0xFE040000	/* PCI regs base address */
 
 /* SH7780 PCI Config Registers */
-#define SH7780_PCIVID		0x000		/* Vendor ID */
-#define SH7780_PCIDID		0x002		/* Device ID */
-#define SH7780_PCICMD		0x004		/* Command */
-#define SH7780_PCISTATUS	0x006		/* Status */
-#define SH7780_PCIRID		0x008		/* Revision ID */
-#define SH7780_PCIPIF		0x009		/* Program Interface */
-#define SH7780_PCISUB		0x00a		/* Sub class code */
-#define SH7780_PCIBCC		0x00b		/* Base class code */
-#define SH7780_PCICLS		0x00c		/* Cache line size */
-#define SH7780_PCILTM		0x00d		/* latency timer */
-#define SH7780_PCIHDR		0x00e		/* Header type */
-#define SH7780_PCIBIST		0x00f		/* BIST */
-#define SH7780_PCIIBAR		0x010		/* IO Base address */
-#define SH7780_PCIMBAR0		0x014		/* Memory base address0 */
-#define SH7780_PCIMBAR1		0x018		/* Memory base address1 */
-#define SH7780_PCISVID		0x02c		/* Sub system vendor ID */
-#define SH7780_PCISID		0x02e		/* Sub system ID */
-#define SH7780_PCICP		0x034
-#define SH7780_PCIINTLINE	0x03c		/* Interrupt line */
-#define SH7780_PCIINTPIN	0x03d		/* Interrupt pin */
-#define SH7780_PCIMINGNT	0x03e		/* Minumum grand */
-#define SH7780_PCIMAXLAT	0x03f		/* Maxmum latency */
-#define SH7780_PCICID		0x040
-#define SH7780_PCINIP		0x041
-#define SH7780_PCIPMC		0x042
-#define SH7780_PCIPMCSR		0x044
-#define SH7780_PCIPMCSR_BSE	0x046
-#define SH7780_PCICDD		0x047
-
 #define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
 #define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
 #define SH7780_PCIAIR		0x11C		/* Error Address Register */
@@ -76,10 +40,8 @@
 #define SH7780_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
 #define SH7780_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
 
-#define SH7780_PCIMBR0		0x1E0
-#define SH7780_PCIMBMR0		0x1E4
-#define SH7780_PCIMBR2		0x1F0
-#define SH7780_PCIMBMR2		0x1F4
+#define SH7780_PCIMBR(x)	(0x1E0 + ((x) * 8))
+#define SH7780_PCIMBMR(x)	(0x1E4 + ((x) * 8))
 #define SH7780_PCIIOBR		0x1F8
 #define SH7780_PCIIOBMR		0x1FC
 #define SH7780_PCICSCR0		0x210		/* Cache Snoop1 Cnt. Register */
@@ -87,16 +49,4 @@
 #define SH7780_PCICSAR0		0x218	/* Cache Snoop1 Addr. Register */
 #define SH7780_PCICSAR1		0x21C	/* Cache Snoop2 Addr. Register */
 
-/* General Memory Config Addresses */
-#define SH7780_CS0_BASE_ADDR	0x0
-#define SH7780_MEM_REGION_SIZE	0x04000000
-#define SH7780_CS1_BASE_ADDR	(SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS2_BASE_ADDR	(SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS3_BASE_ADDR	(SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS4_BASE_ADDR	(SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS5_BASE_ADDR	(SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-#define SH7780_CS6_BASE_ADDR	(SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
-
-#define SH7780_32BIT_DDR_BASE_ADDR	0x40000000
-
 #endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index c481df6..1e9598d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -33,15 +33,22 @@ static int pci_initialized;
 static void __devinit pcibios_scanbus(struct pci_channel *hose)
 {
 	static int next_busno;
+	static int need_domain_info;
 	struct pci_bus *bus;
 
 	bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+	hose->bus = bus;
+
+	need_domain_info = need_domain_info || hose->index;
+	hose->need_domain_info = need_domain_info;
 	if (bus) {
 		next_busno = bus->subordinate + 1;
 		/* Don't allow 8-bit bus number overflow inside the hose -
 		   reserve some space for bridges. */
-		if (next_busno > 224)
+		if (next_busno > 224) {
 			next_busno = 0;
+			need_domain_info = 1;
+		}
 
 		pci_bus_size_bridges(bus);
 		pci_bus_assign_resources(bus);
@@ -51,10 +58,21 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose)
 
 static DEFINE_MUTEX(pci_scan_mutex);
 
-void __devinit register_pci_controller(struct pci_channel *hose)
+int __devinit register_pci_controller(struct pci_channel *hose)
 {
-	request_resource(&iomem_resource, hose->mem_resource);
-	request_resource(&ioport_resource, hose->io_resource);
+	int i;
+
+	for (i = 0; i < hose->nr_resources; i++) {
+		struct resource *res = hose->resources + i;
+
+		if (res->flags & IORESOURCE_IO) {
+			if (request_resource(&ioport_resource, res) < 0)
+				goto out;
+		} else {
+			if (request_resource(&iomem_resource, res) < 0)
+				goto out;
+		}
+	}
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -68,6 +86,11 @@ void __devinit register_pci_controller(struct pci_channel *hose)
 	}
 
 	/*
+	 * Setup the ERR/PERR and SERR timers, if available.
+	 */
+	pcibios_enable_timers(hose);
+
+	/*
 	 * Scan the bus if it is register after the PCI subsystem
 	 * initialization.
 	 */
@@ -76,6 +99,15 @@ void __devinit register_pci_controller(struct pci_channel *hose)
 		pcibios_scanbus(hose);
 		mutex_unlock(&pci_scan_mutex);
 	}
+
+	return 0;
+
+out:
+	for (--i; i >= 0; i--)
+		release_resource(&hose->resources[i]);
+
+	printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n");
+	return -1;
 }
 
 static int __init pcibios_init(void)
@@ -107,8 +139,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		if (!dev->resource[i].start)
 			continue;
-		if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
-			continue;
 		if (dev->resource[i].flags & IORESOURCE_IO)
 			offset = hose->io_offset;
 		else if (dev->resource[i].flags & IORESOURCE_MEM)
@@ -127,11 +157,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev = bus->self;
 	struct list_head *ln;
-	struct pci_channel *chan = bus->sysdata;
+	struct pci_channel *hose = bus->sysdata;
 
 	if (!dev) {
-		bus->resource[0] = chan->io_resource;
-		bus->resource[1] = chan->mem_resource;
+		int i;
+
+		for (i = 0; i < hose->nr_resources; i++)
+			bus->resource[i] = hose->resources + i;
 	}
 
 	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
@@ -148,34 +180,29 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
  * addresses to be allocated in the 0x000-0x0ff region
  * modulo 0x400.
  */
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
-	struct pci_channel *chan = dev->sysdata;
+	struct pci_channel *hose = dev->sysdata;
 	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
-			start = PCIBIOS_MIN_IO + chan->io_resource->start;
+		if (start < PCIBIOS_MIN_IO + hose->resources[0].start)
+			start = PCIBIOS_MIN_IO + hose->resources[0].start;
 
 		/*
                  * Put everything into 0x00-0xff region modulo 0x400.
 		 */
-		if (start & 0x300) {
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	} else if (res->flags & IORESOURCE_MEM) {
-		if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
-			start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
 	}
 
-	res->start = start;
+	return start;
 }
 
 void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			 struct resource *res)
+			     struct resource *res)
 {
 	struct pci_channel *hose = dev->sysdata;
 	unsigned long offset = 0;
@@ -189,9 +216,8 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 	region->end = res->end - offset;
 }
 
-void __devinit
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			struct pci_bus_region *region)
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			     struct pci_bus_region *region)
 {
 	struct pci_channel *hose = dev->sysdata;
 	unsigned long offset = 0;
@@ -274,6 +300,86 @@ char * __devinit pcibios_setup(char *str)
 	return str;
 }
 
+static void __init
+pcibios_bus_report_status_early(struct pci_channel *hose,
+				int top_bus, int current_bus,
+				unsigned int status_mask, int warn)
+{
+	unsigned int pci_devfn;
+	u16 status;
+	int ret;
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		ret = early_read_config_word(hose, top_bus, current_bus,
+					     pci_devfn, PCI_STATUS, &status);
+		if (ret != PCIBIOS_SUCCESSFUL)
+			continue;
+		if (status == 0xffff)
+			continue;
+
+		early_write_config_word(hose, top_bus, current_bus,
+					pci_devfn, PCI_STATUS,
+					status & status_mask);
+		if (warn)
+			printk("(%02x:%02x: %04X) ", current_bus,
+			       pci_devfn, status);
+	}
+}
+
+/*
+ * We can't use pci_find_device() here since we are
+ * called from interrupt context.
+ */
+static void __init_refok
+pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask,
+			  int warn)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 status;
+
+		/*
+		 * ignore host bridge - we handle
+		 * that separately
+		 */
+		if (dev->bus->number == 0 && dev->devfn == 0)
+			continue;
+
+		pci_read_config_word(dev, PCI_STATUS, &status);
+		if (status == 0xffff)
+			continue;
+
+		if ((status & status_mask) == 0)
+			continue;
+
+		/* clear the status errors */
+		pci_write_config_word(dev, PCI_STATUS, status & status_mask);
+
+		if (warn)
+			printk("(%s: %04X) ", pci_name(dev), status);
+	}
+
+	list_for_each_entry(dev, &bus->devices, bus_list)
+		if (dev->subordinate)
+			pcibios_bus_report_status(dev->subordinate, status_mask, warn);
+}
+
+void __init_refok pcibios_report_status(unsigned int status_mask, int warn)
+{
+	struct pci_channel *hose;
+
+	for (hose = hose_head; hose; hose = hose->next) {
+		if (unlikely(!hose->bus))
+			pcibios_bus_report_status_early(hose, hose_head->index,
+					hose->index, status_mask, warn);
+		else
+			pcibios_bus_report_status(hose->bus, status_mask, warn);
+	}
+}
+
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
@@ -302,9 +408,15 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev,
 {
 	struct pci_channel *chan = dev->sysdata;
 
-	if (!chan->io_map_base)
+	if (unlikely(!chan->io_map_base)) {
 		chan->io_map_base = generic_io_base;
 
+		if (pci_domains_supported)
+			panic("To avoid data corruption io_map_base MUST be "
+			      "set with multiple PCI domains.");
+	}
+
+
 	return (void __iomem *)(chan->io_map_base + port);
 }
 
@@ -321,20 +433,9 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 
 	if (flags & IORESOURCE_IO)
 		return ioport_map_pci(dev, start, len);
-
-	/*
-	 * Presently the IORESOURCE_MEM case is a bit special, most
-	 * SH7751 style PCI controllers have PCI memory at a fixed
-	 * location in the address space where no remapping is desired.
-	 * With the IORESOURCE_MEM case more care has to be taken
-	 * to inhibit page table mapping for legacy cores, but this is
-	 * punted off to __ioremap().
-	 *					-- PFM.
-	 */
 	if (flags & IORESOURCE_MEM) {
 		if (flags & IORESOURCE_CACHEABLE)
 			return ioremap(start, len);
-
 		return ioremap_nocache(start, len);
 	}
 
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index ac37ee8..68cb9b0 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -1,7 +1,7 @@
 /*
  * Low-Level PCI Express Support for the SH7786
  *
- *  Copyright (C) 2009  Paul Mundt
+ *  Copyright (C) 2009 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include "pcie-sh7786.h"
 #include <asm/sizes.h>
 
@@ -30,60 +31,84 @@ static struct sh7786_pcie_hwops {
 	int (*port_init_hw)(struct sh7786_pcie_port *port);
 } *sh7786_pcie_hwops;
 
-static struct resource sh7786_pci_32bit_mem_resources[] = {
+static struct resource sh7786_pci0_resources[] = {
 	{
-		.name	= "pci0_mem",
-		.start	= SH4A_PCIMEM_BASEA,
-		.end	= SH4A_PCIMEM_BASEA + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
+		.name	= "PCIe0 IO",
+		.start	= 0xfd000000,
+		.end	= 0xfd000000 + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
 	}, {
-		.name	= "pci1_mem",
-		.start	= SH4A_PCIMEM_BASEA1,
-		.end	= SH4A_PCIMEM_BASEA1 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
+		.name	= "PCIe0 MEM 0",
+		.start	= 0xc0000000,
+		.end	= 0xc0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	}, {
-		.name	= "pci2_mem",
-		.start	= SH4A_PCIMEM_BASEA2,
-		.end	= SH4A_PCIMEM_BASEA2 + SZ_64M - 1,
+		.name	= "PCIe0 MEM 1",
+		.start	= 0x10000000,
+		.end	= 0x10000000 + SZ_64M - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "PCIe0 MEM 2",
+		.start	= 0xfe100000,
+		.end	= 0xfe100000 + SZ_1M - 1,
 	},
 };
 
-static struct resource sh7786_pci_29bit_mem_resource = {
-	.start	= SH4A_PCIMEM_BASE,
-	.end	= SH4A_PCIMEM_BASE + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
+static struct resource sh7786_pci1_resources[] = {
+	{
+		.name	= "PCIe1 IO",
+		.start	= 0xfd800000,
+		.end	= 0xfd800000 + SZ_8M - 1,
+		.flags	= IORESOURCE_IO,
+	}, {
+		.name	= "PCIe1 MEM 0",
+		.start	= 0xa0000000,
+		.end	= 0xa0000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe1 MEM 1",
+		.start	= 0x30000000,
+		.end	= 0x30000000 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe1 MEM 2",
+		.start	= 0xfe300000,
+		.end	= 0xfe300000 + SZ_1M - 1,
+	},
 };
 
-static struct resource sh7786_pci_io_resources[] = {
+static struct resource sh7786_pci2_resources[] = {
 	{
-		.name	= "pci0_io",
-		.start	= SH4A_PCIIO_BASE,
-		.end	= SH4A_PCIIO_BASE + SZ_8M - 1,
-		.flags	= IORESOURCE_IO,
+		.name	= "PCIe2 IO",
+		.start	= 0xfc800000,
+		.end	= 0xfc800000 + SZ_4M - 1,
 	}, {
-		.name	= "pci1_io",
-		.start	= SH4A_PCIIO_BASE1,
-		.end	= SH4A_PCIIO_BASE1 + SZ_8M - 1,
-		.flags	= IORESOURCE_IO,
+		.name	= "PCIe2 MEM 0",
+		.start	= 0x80000000,
+		.end	= 0x80000000 + SZ_512M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
 	}, {
-		.name	= "pci2_io",
-		.start	= SH4A_PCIIO_BASE2,
-		.end	= SH4A_PCIIO_BASE2 + SZ_4M - 1,
-		.flags	= IORESOURCE_IO,
+		.name	= "PCIe2 MEM 1",
+		.start	= 0x20000000,
+		.end	= 0x20000000 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	}, {
+		.name	= "PCIe2 MEM 2",
+		.start	= 0xfcd00000,
+		.end	= 0xfcd00000 + SZ_1M - 1,
 	},
 };
 
 extern struct pci_ops sh7786_pci_ops;
 
-#define DEFINE_CONTROLLER(start, idx)				\
-{								\
-	.pci_ops	= &sh7786_pci_ops,			\
-	.reg_base	= start,				\
-	/* mem_resource filled in at probe time */		\
-	.mem_offset	= 0,					\
-	.io_resource	= &sh7786_pci_io_resources[idx],	\
-	.io_offset	= 0,					\
+#define DEFINE_CONTROLLER(start, idx)					\
+{									\
+	.pci_ops	= &sh7786_pci_ops,				\
+	.resources	= sh7786_pci##idx##_resources,			\
+	.nr_resources	= ARRAY_SIZE(sh7786_pci##idx##_resources),	\
+	.reg_base	= start,					\
+	.mem_offset	= 0,						\
+	.io_offset	= 0,						\
 }
 
 static struct pci_channel sh7786_pci_channels[] = {
@@ -180,7 +205,9 @@ static int pcie_init(struct sh7786_pcie_port *port)
 {
 	struct pci_channel *chan = port->hose;
 	unsigned int data;
-	int ret;
+	phys_addr_t memphys;
+	size_t memsize;
+	int ret, i;
 
 	/* Begin initialization */
 	pci_write_reg(chan, 0, SH4A_PCIETCTLR);
@@ -203,15 +230,24 @@ static int pcie_init(struct sh7786_pcie_port *port)
 	data |= PCI_CAP_ID_EXP;
 	pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
 
-	/* Enable x4 link width and extended sync. */
+	/* Enable data link layer active state reporting */
+	pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
+
+	/* Enable extended sync and ASPM L0s support */
 	data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
-	data &= ~(PCI_EXP_LNKSTA_NLW << 16);
-	data |= (1 << 22) | PCI_EXP_LNKCTL_ES;
+	data &= ~PCI_EXP_LNKCTL_ASPMC;
+	data |= PCI_EXP_LNKCTL_ES | 1;
 	pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
 
+	/* Write out the physical slot number */
+	data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
+	data &= ~PCI_EXP_SLTCAP_PSN;
+	data |= (port->index + 1) << 19;
+	pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
+
 	/* Set the completion timer timeout to the maximum 32ms. */
 	data = pci_read_reg(chan, SH4A_PCIETLCTLR);
-	data &= ~0xffff;
+	data &= ~0x3f00;
 	data |= 0x32 << 8;
 	pci_write_reg(chan, data, SH4A_PCIETLCTLR);
 
@@ -224,6 +260,33 @@ static int pcie_init(struct sh7786_pcie_port *port)
 	data |= (0xff << 16);
 	pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
 
+	memphys = __pa(memory_start);
+	memsize = roundup_pow_of_two(memory_end - memory_start);
+
+	/*
+	 * If there's more than 512MB of memory, we need to roll over to
+	 * LAR1/LAMR1.
+	 */
+	if (memsize > SZ_512M) {
+		__raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1);
+		__raw_writel(((memsize - SZ_512M) - SZ_256) | 1,
+			     chan->reg_base + SH4A_PCIELAMR1);
+		memsize = SZ_512M;
+	} else {
+		/*
+		 * Otherwise just zero it out and disable it.
+		 */
+		__raw_writel(0, chan->reg_base + SH4A_PCIELAR1);
+		__raw_writel(0, chan->reg_base + SH4A_PCIELAMR1);
+	}
+
+	/*
+	 * LAR0/LAMR0 covers up to the first 512MB, which is enough to
+	 * cover all of lowmem on most platforms.
+	 */
+	__raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0);
+	__raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0);
+
 	/* Finish initialization */
 	data = pci_read_reg(chan, SH4A_PCIETCTLR);
 	data |= 0x1;
@@ -243,10 +306,14 @@ static int pcie_init(struct sh7786_pcie_port *port)
 	if (unlikely(ret != 0))
 		return -ENODEV;
 
-	pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1);
+	data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
+	data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
+	data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		(PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
+	pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
+
 	pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
 	pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
-	pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2);
 
 	wmb();
 
@@ -254,15 +321,32 @@ static int pcie_init(struct sh7786_pcie_port *port)
 	printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n",
 	       port->index, (data >> 20) & 0x3f);
 
-	pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0);
-	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0);
-	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0);
-	pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0);
 
-	pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2);
-	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2);
-	pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2);
-	pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2);
+	for (i = 0; i < chan->nr_resources; i++) {
+		struct resource *res = chan->resources + i;
+		resource_size_t size;
+		u32 enable_mask;
+
+		pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i));
+
+		size = resource_size(res);
+
+		/*
+		 * The PAMR mask is calculated in units of 256kB, which
+		 * keeps things pretty simple.
+		 */
+		__raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+			     chan->reg_base + SH4A_PCIEPAMR(i));
+
+		pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i));
+		pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i));
+
+		enable_mask = MASK_PARE;
+		if (res->flags & IORESOURCE_IO)
+			enable_mask |= MASK_SPC;
+
+		pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i));
+	}
 
 	return 0;
 }
@@ -296,9 +380,7 @@ static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
 	if (unlikely(ret < 0))
 		return ret;
 
-	register_pci_controller(port->hose);
-
-	return 0;
+	return register_pci_controller(port->hose);
 }
 
 static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
@@ -332,17 +414,7 @@ static int __init sh7786_pcie_init(void)
 
 		port->index		= i;
 		port->hose		= sh7786_pci_channels + i;
-		port->hose->io_map_base	= port->hose->io_resource->start;
-
-		/*
-		 * Check if we are booting in 29 or 32-bit mode
-		 *
-		 * 32-bit mode provides each controller with its own
-		 * memory window, while 29-bit mode uses a shared one.
-		 */
-		port->hose->mem_resource = test_mode_pin(MODE_PIN10) ?
-			&sh7786_pci_32bit_mem_resources[i] :
-			&sh7786_pci_29bit_mem_resource;
+		port->hose->io_map_base	= port->hose->resources[0].start;
 
 		ret |= sh7786_pcie_hwops->port_init_hw(port);
 	}
diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h
index c655290..90a6992 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.h
+++ b/arch/sh/drivers/pci/pcie-sh7786.h
@@ -30,47 +30,9 @@
  * for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
  */
 
-/* PCI0-0: PCI I/O space */
-#define SH4A_PCIIO_BASE		0xFD000000	/* PCI I/O for controller 0 */
-#define SH4A_PCIIO_BASE1	0xFD800000	/* PCI I/O for controller 1 (Rev1.14)*/
-#define SH4A_PCIIO_BASE2	0xFC800000	/* PCI I/O for controller 2 (Rev1.171)*/
-
-#define SH4A_PCIIO_SIZE64	0x00010000	/* PLX allows only 64K */
-#define SH4A_PCIIO_SIZE		0x00800000	/* 8M */
-#define SH4A_PCIIO_SIZE2	0x00400000	/* 4M (Rev1.171)*/
-
-/* PCI0-1: PCI memory space 29-bit address */
-#define SH4A_PCIMEM_BASE	0x10000000
-#define SH4A_PCIMEM_SIZE	0x04000000	/* 64M */
-
-/* PCI0-2: PCI memory space 32-bit address */
-#define SH4A_PCIMEM_BASEA	0xC0000000	/*  for controller 0 */
-#define SH4A_PCIMEM_BASEA1	0xA0000000	/*  for controller 1 (Rev1.14)*/
-#define SH4A_PCIMEM_BASEA2	0x80000000	/*  for controller 2 (Rev1.171)*/
-#define SH4A_PCIMEM_SIZEA	0x20000000	/* 512M */
-
 /* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
 #define SH4A_PCIBMSTR_TRANSLATION	0x20000000
 
-#define SH4A_PCI_DEVICE_ID		0x0002
-#define SH4A_PCI_VENDOR_ID		0x1912
-
-// PCI compatible 000-03f
-#define PCI_CMD		0x004
-#define PCI_RID		0x008
-#define PCI_IBAR	0x010
-#define PCI_MBAR0	0x014
-#define PCI_MBAR1	0x018
-
-/* PCI power management/MSI/capablity 040-0ff */
-/* PCIE extended 100-fff */
-
-/* SH7786 device identification */	// Rev1.171
-#define SH4A_PVR		(0xFF000030)
-#define SH4A_PVR_SHX3		(0x10400000)
-#define SH4A_PRR		(0xFF000044)
-#define SH4A_PRR_SH7786		(0x00000400)	// Rev1.171
-
 /*	SPVCR0		*/
 #define	SH4A_PCIEVCR0		(0x000000)	/* R - 0x0000 0000 32 */
 #define		BITS_TOP_MB	(24)
@@ -350,23 +312,23 @@
 #define	SH4A_PCIECSAR5		(0x0202B4)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIESTCTLR5	(0x0202B8)	/* R/W R/W 0x0000 0000 32 */
 
-/*	PCIEPARL0	*/
-#define	SH4A_PCIEPARL0		(0x020400)	/* R/W R/W 0x0000 0000 32 */
+/*	PCIEPARL	*/
+#define	SH4A_PCIEPARL(x)	(0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
 #define		BITS_PAL	(18)
 #define		MASK_PAL	(0x3fff<<BITS_PAL)
 
-/*	PCIEPARH0	*/
-#define	SH4A_PCIEPARH0		(0x020404)	/* R/W R/W 0x0000 0000 32 */
+/*	PCIEPARH	*/
+#define	SH4A_PCIEPARH(x)	(0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
 #define		BITS_PAH	(0)
 #define		MASK_PAH	(0xffffffff<<BITS_PAH)
 
-/*	PCIEPAMR0	 */
-#define	SH4A_PCIEPAMR0		(0x020408)	/* R/W R/W 0x0000 0000 32 */
+/*	PCIEPAMR	 */
+#define	SH4A_PCIEPAMR(x)	(0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */
 #define		BITS_PAM	(18)
 #define		MASK_PAM	(0x3fff<<BITS_PAM)
 
-/*	PCIEPTCTLR0	*/
-#define	SH4A_PCIEPTCTLR0	(0x02040C)	/* R/W R/W 0x0000 0000 32 */
+/*	PCIEPTCTLR	*/
+#define SH4A_PCIEPTCTLR(x)	(0x02040C + ((x) * 0x20))
 #define		BITS_PARE	(31)
 #define		MASK_PARE	(0x1<<BITS_PARE)
 #define		BITS_TC		(20)
@@ -378,26 +340,6 @@
 #define		BITS_SPC	(8)
 #define		MASK_SPC	(0x1<<BITS_SPC)
 
-#define	SH4A_PCIEPARL1		(0x020420)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARH1		(0x020424)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPAMR1		(0x020428)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPTCTLR1	(0x02042C)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARL2		(0x020440)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARH2		(0x020444)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPAMR2		(0x020448)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPTCTLR2	(0x02044C)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARL3		(0x020460)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARH3		(0x020464)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPAMR3		(0x020468)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPTCTLR3	(0x02046C)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARL4		(0x020480)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARH4		(0x020484)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPAMR4		(0x020488)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPTCTLR4	(0x02048C)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARL5		(0x0204A0)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPARH5		(0x0204A4)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPAMR5		(0x0204A8)	/* R/W R/W 0x0000 0000 32 */
-#define	SH4A_PCIEPTCTLR5	(0x0204AC)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMAOR		(0x021000)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAR0		(0x021100)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAHR0	(0x021104)	/* R/W R/W 0x0000 0000 32 */
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index 725be6d..7b42c24 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -8,6 +8,7 @@
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c
index 3b14bf8..6da62e9 100644
--- a/arch/sh/drivers/superhyway/ops-sh4-202.c
+++ b/arch/sh/drivers/superhyway/ops-sh4-202.c
@@ -134,8 +134,8 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr)
 	 *
 	 * Do not trust the documentation, for it is evil.
 	 */
-	vcrh = ctrl_inl(base);
-	vcrl = ctrl_inl(base + sizeof(u32));
+	vcrh = __raw_readl(base);
+	vcrl = __raw_readl(base + sizeof(u32));
 
 	tmp = ((u64)vcrh << 32) | vcrl;
 	memcpy(vcr, &tmp, sizeof(u64));
@@ -147,8 +147,8 @@ static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr)
 {
 	u64 tmp = *(u64 *)&vcr;
 
-	ctrl_outl((tmp >> 32) & 0xffffffff, base);
-	ctrl_outl(tmp & 0xffffffff, base + sizeof(u32));
+	__raw_writel((tmp >> 32) & 0xffffffff, base);
+	__raw_writel(tmp & 0xffffffff, base + sizeof(u32));
 
 	return 0;
 }
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index e121c30..46cb934 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,6 +1,8 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += cachectl.h cpu-features.h
+header-y += cachectl.h
+header-y += cpu-features.h
+header-y += hw_breakpoint.h
 
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 99d6b3e..446b383 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -28,7 +28,7 @@
 /* Returns the privileged segment base of a given address  */
 #define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
 
-#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
+#ifdef CONFIG_29BIT
 /*
  * Map an address to a certain privileged segment
  */
@@ -40,7 +40,15 @@
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
 #define P4SEGADDR(a)	\
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT || PMB_FIXED */
+#else
+/*
+ * These will never work in 32-bit, don't even bother.
+ */
+#define P1SEGADDR(a)	__futile_remapping_attempt
+#define P2SEGADDR(a)	__futile_remapping_attempt
+#define P3SEGADDR(a)	__futile_remapping_attempt
+#define P4SEGADDR(a)	__futile_remapping_attempt
+#endif
 #endif /* P1SEG */
 
 /* Check if an address can be reached in 29 bits */
@@ -57,11 +65,5 @@
 #define P3_ADDR_MAX		P4SEG
 #endif
 
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_PMB
-extern int __in_29bit_mode(void);
-#endif /* CONFIG_PMB */
-#endif /* __ASSEMBLY__ */
-
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/alignment.h b/arch/sh/include/asm/alignment.h
new file mode 100644
index 0000000..b12efec
--- /dev/null
+++ b/arch/sh/include/asm/alignment.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_ALIGNMENT_H
+#define __ASM_SH_ALIGNMENT_H
+
+#include <linux/types.h>
+
+extern void inc_unaligned_byte_access(void);
+extern void inc_unaligned_word_access(void);
+extern void inc_unaligned_dword_access(void);
+extern void inc_unaligned_multi_access(void);
+extern void inc_unaligned_user_access(void);
+extern void inc_unaligned_kernel_access(void);
+
+#define UM_WARN		(1 << 0)
+#define UM_FIXUP	(1 << 1)
+#define UM_SIGNAL	(1 << 2)
+
+extern unsigned int unaligned_user_action(void);
+
+extern void unaligned_fixups_notify(struct task_struct *, insn_size_t, struct pt_regs *);
+
+#endif /* __ASM_SH_ALIGNMENT_H */
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
index 4c5b7db..a273c88 100644
--- a/arch/sh/include/asm/atomic-grb.h
+++ b/arch/sh/include/asm/atomic-grb.h
@@ -120,50 +120,4 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 		: "memory" , "r0", "r1");
 }
 
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-
-	__asm__ __volatile__ (
-		"   .align 2		\n\t"
-		"   mova     1f,  r0	\n\t"
-		"   nop			\n\t"
-		"   mov     r15,  r1	\n\t"
-		"   mov    #-8,  r15	\n\t"
-		"   mov.l   @%1,  %0	\n\t"
-		"   cmp/eq   %2,  %0	\n\t"
-		"   bf	     1f		\n\t"
-		"   mov.l    %3, @%1	\n\t"
-		"1: mov      r1,  r15	\n\t"
-		: "=&r" (ret)
-		: "r" (v), "r" (old), "r" (new)
-		: "memory" , "r0", "r1" , "t");
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int ret;
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"   .align 2		\n\t"
-		"   mova    1f,   r0	\n\t"
-		"   nop			\n\t"
-		"   mov    r15,   r1	\n\t"
-		"   mov    #-12,  r15	\n\t"
-		"   mov.l  @%2,   %1	\n\t"
-		"   mov	    %1,   %0    \n\t"
-		"   cmp/eq  %4,   %0	\n\t"
-		"   bt/s    1f		\n\t"
-		"    add    %3,   %1	\n\t"
-		"   mov.l   %1,  @%2	\n\t"
-		"1: mov     r1,   r15	\n\t"
-		: "=&r" (ret), "=&r" (tmp)
-		: "r" (v), "r" (a), "r" (u)
-		: "memory" , "r0", "r1" , "t");
-
-	return ret != u;
-}
 #endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index b040e1e..4b00b78 100644
--- a/arch/sh/include/asm/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -104,31 +104,4 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 	: "t");
 }
 
-#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-
-	return c != (u);
-}
-
 #endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index b16388d..c798312 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -13,7 +13,7 @@
 
 #define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)		((v)->counter = (i))
 
 #if defined(CONFIG_GUSA_RB)
@@ -25,58 +25,43 @@
 #endif
 
 #define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic_inc_and_test(v)		(atomic_inc_return(v) == 0)
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_not_zero(v)		atomic_add_unless((v), 1, 0)
 
-#define atomic_dec_return(v) atomic_sub_return(1,(v))
-#define atomic_inc_return(v) atomic_add_return(1,(v))
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
 
-/*
- * atomic_inc_and_test - increment and test
+#define atomic_xchg(v, new)		(xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, o, n)		(cmpxchg(&((v)->counter), (o), (n)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
  * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
  *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
  */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc(v) atomic_add(1,(v))
-#define atomic_dec(v) atomic_sub(1,(v))
-
-#if !defined(CONFIG_GUSA_RB) && !defined(CONFIG_CPU_SH4A)
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
 static inline int atomic_add_unless(atomic_t *v, int a, int u)
 {
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (ret != u)
-		v->counter += a;
-	local_irq_restore(flags);
-
-	return ret != u;
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+
+	return c != (u);
 }
-#endif /* !CONFIG_GUSA_RB && !CONFIG_CPU_SH4A */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index d02c01b..6323f86 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -48,7 +48,7 @@ do {							\
 		   "i" (sizeof(struct bug_entry)));	\
 } while (0)
 
-#define __WARN()					\
+#define __WARN_TAINT(taint)				\
 do {							\
 	__asm__ __volatile__ (				\
 		"1:\t.short %O0\n"			\
@@ -57,7 +57,7 @@ do {							\
 		 : "n" (TRAPA_BUG_OPCODE),		\
 		   "i" (__FILE__),			\
 		   "i" (__LINE__),			\
-		   "i" (BUGFLAG_WARNING),		\
+		   "i" (BUGFLAG_TAINT(taint)),		\
 		   "i" (sizeof(struct bug_entry)));	\
 } while (0)
 
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
index 455a9a9..ef9e555 100644
--- a/arch/sh/include/asm/cache.h
+++ b/arch/sh/include/asm/cache.h
@@ -38,14 +38,10 @@ struct cache_info {
 	 * 2. those in the physical page number.
 	 */
 	unsigned int alias_mask;
-
 	unsigned int n_aliases;		/* Number of aliases */
 
 	unsigned long flags;
 };
-
-int __init detect_cpu_and_cache_system(void);
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index dda96eb..1f4e562 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -63,6 +63,14 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 	if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
 		__flush_anon_page(page, vmaddr);
 }
+static inline void flush_kernel_vmap_range(void *addr, int size)
+{
+	__flush_wback_region(addr, size);
+}
+static inline void invalidate_kernel_vmap_range(void *addr, int size)
+{
+	__flush_invalidate_region(addr, size);
+}
 
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
@@ -78,8 +86,8 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
 
-#define flush_cache_vmap(start, end)		flush_cache_all()
-#define flush_cache_vunmap(start, end)		flush_cache_all()
+#define flush_cache_vmap(start, end)		local_flush_cache_all(NULL)
+#define flush_cache_vunmap(start, end)		local_flush_cache_all(NULL)
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/sh/include/asm/clkdev.h b/arch/sh/include/asm/clkdev.h
new file mode 100644
index 0000000..5645f35
--- /dev/null
+++ b/arch/sh/include/asm/clkdev.h
@@ -0,0 +1,35 @@
+/*
+ *  arch/sh/include/asm/clkdev.h
+ *
+ * Cloned from arch/arm/include/asm/clkdev.h:
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#ifndef __ASM_CLKDEV_H
+#define __ASM_CLKDEV_H
+
+struct clk;
+
+struct clk_lookup {
+	struct list_head	node;
+	const char		*dev_id;
+	const char		*con_id;
+	struct clk		*clk;
+};
+
+struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...);
+
+void clkdev_add(struct clk_lookup *cl);
+void clkdev_drop(struct clk_lookup *cl);
+
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
+#endif
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
index 9fe7d7f..803d4c7 100644
--- a/arch/sh/include/asm/clock.h
+++ b/arch/sh/include/asm/clock.h
@@ -1,162 +1,16 @@
 #ifndef __ASM_SH_CLOCK_H
 #define __ASM_SH_CLOCK_H
 
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-struct clk;
-
-struct clk_ops {
-	void (*init)(struct clk *clk);
-	int (*enable)(struct clk *clk);
-	void (*disable)(struct clk *clk);
-	unsigned long (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
-	int (*set_parent)(struct clk *clk, struct clk *parent);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-	struct list_head	node;
-	const char		*name;
-	int			id;
-	struct module		*owner;
-
-	struct clk		*parent;
-	struct clk_ops		*ops;
-
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
-
-	int			usecount;
-
-	unsigned long		rate;
-	unsigned long		flags;
-
-	void __iomem		*enable_reg;
-	unsigned int		enable_bit;
-
-	unsigned long		arch_flags;
-	void			*priv;
-	struct dentry		*dentry;
-	struct cpufreq_frequency_table *freq_table;
-};
-
-struct clk_lookup {
-	struct list_head	node;
-	const char		*dev_id;
-	const char		*con_id;
-	struct clk		*clk;
-};
-
-#define CLK_ENABLE_ON_INIT	(1 << 0)
+#include <linux/sh_clk.h>
 
 /* Should be defined by processor-specific code */
 void __deprecated arch_init_clk_ops(struct clk_ops **, int type);
 int __init arch_clk_init(void);
 
-/* arch/sh/kernel/cpu/clock.c */
-int clk_init(void);
-unsigned long followparent_recalc(struct clk *);
-void recalculate_root_clocks(void);
-void propagate_rate(struct clk *);
-int clk_reparent(struct clk *child, struct clk *parent);
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
 /* arch/sh/kernel/cpu/clock-cpg.c */
 int __init __deprecated cpg_clk_init(void);
 
-/* the exported API, in addition to clk_set_rate */
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-
-struct clk_div_mult_table {
-	unsigned int *divisors;
-	unsigned int nr_divisors;
-	unsigned int *multipliers;
-	unsigned int nr_multipliers;
-};
-
-struct cpufreq_frequency_table;
-void clk_rate_table_build(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  int nr_freqs,
-			  struct clk_div_mult_table *src_table,
-			  unsigned long *bitmap);
-
-long clk_rate_table_round(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  unsigned long rate);
-
-int clk_rate_table_find(struct clk *clk,
-			struct cpufreq_frequency_table *freq_table,
-			unsigned long rate);
-
-#define SH_CLK_MSTP32(_name, _id, _parent, _enable_reg,	\
-	    _enable_bit, _flags)			\
-{							\
-	.name		= _name,			\
-	.id		= _id,				\
-	.parent		= _parent,			\
-	.enable_reg	= (void __iomem *)_enable_reg,	\
-	.enable_bit	= _enable_bit,			\
-	.flags		= _flags,			\
-}
-
-int sh_clk_mstp32_register(struct clk *clks, int nr);
-
-#define SH_CLK_DIV4(_name, _parent, _reg, _shift, _div_bitmap, _flags)	\
-{									\
-	.name = _name,							\
-	.parent = _parent,						\
-	.enable_reg = (void __iomem *)_reg,				\
-	.enable_bit = _shift,						\
-	.arch_flags = _div_bitmap,					\
-	.flags = _flags,						\
-}
-
-int sh_clk_div4_register(struct clk *clks, int nr,
-			 struct clk_div_mult_table *table);
-
-#define SH_CLK_DIV6(_name, _parent, _reg, _flags)	\
-{							\
-	.name = _name,					\
-	.parent = _parent,				\
-	.enable_reg = (void __iomem *)_reg,		\
-	.flags = _flags,				\
-}
-
-int sh_clk_div6_register(struct clk *clks, int nr);
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
 
 #endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index e2681ab..4676bf5 100644
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -57,11 +57,10 @@ static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
 		"   mov.l  @%1,   %0      \n\t" /* load  old value */
 		"   cmp/eq  %0,   %2      \n\t"
 		"   bf            1f      \n\t" /* if not equal */
-		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"   mov.l   %3,   @%1     \n\t" /* store new value */
 		"1: mov     r1,   r15     \n\t" /* LOGOUT */
-		: "=&r" (retval),
-		  "+r"  (m)
-		: "r"   (new)
+		: "=&r" (retval)
+		:  "r"  (m), "r"  (old), "r"  (new)
 		: "memory" , "r0", "r1", "t");
 
 	return retval;
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 87ced13..bea3337 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -89,8 +89,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 
-	WARN_ON(irqs_disabled());	/* for portability */
-
 	if (dma_release_from_coherent(dev, get_order(size), vaddr))
 		return;
 
diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h
new file mode 100644
index 0000000..51cd78f
--- /dev/null
+++ b/arch/sh/include/asm/dma-register.h
@@ -0,0 +1,51 @@
+/*
+ * Common header for the legacy SH DMA driver and the new dmaengine driver
+ *
+ * extracted from arch/sh/include/asm/dma-sh.h:
+ *
+ * Copyright (C) 2000  Takashi YOSHII
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef DMA_REGISTER_H
+#define DMA_REGISTER_H
+
+/* DMA register */
+#define SAR	0x00
+#define DAR	0x04
+#define TCR	0x08
+#define CHCR	0x0C
+#define DMAOR	0x40
+
+/* DMAOR definitions */
+#define DMAOR_AE	0x00000004
+#define DMAOR_NMIF	0x00000002
+#define DMAOR_DME	0x00000001
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L	0x00000000
+#define REQ_E	0x00080000
+#define RACK_H	0x00000000
+#define RACK_L	0x00040000
+#define ACK_R	0x00000000
+#define ACK_W	0x00020000
+#define ACK_H	0x00000000
+#define ACK_L	0x00010000
+#define DM_INC	0x00004000
+#define DM_DEC	0x00008000
+#define DM_FIX	0x0000c000
+#define SM_INC	0x00001000
+#define SM_DEC	0x00002000
+#define SM_FIX	0x00003000
+#define RS_IN	0x00000200
+#define RS_OUT	0x00000300
+#define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
+#define CHCR_DE	0x00000001
+#define CHCR_TE	0x00000002
+#define CHCR_IE	0x00000004
+
+#endif
diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 78eed3e..f3acb8e 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -11,7 +11,8 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/dma.h>
+#include <asm/dma-register.h>
+#include <cpu/dma-register.h>
 #include <cpu/dma.h>
 
 /* DMAOR contorl: The DMAOR access size is different by CPU.*/
@@ -20,14 +21,14 @@
     defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define dmaor_read_reg(n) \
-    (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
-	: ctrl_inw(SH_DMAC_BASE0 + DMAOR))
+    (n ? __raw_readw(SH_DMAC_BASE1 + DMAOR) \
+	: __raw_readw(SH_DMAC_BASE0 + DMAOR))
 #define dmaor_write_reg(n, data) \
-    (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
-    : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
+    (n ? __raw_writew(data, SH_DMAC_BASE1 + DMAOR) \
+    : __raw_writew(data, SH_DMAC_BASE0 + DMAOR))
 #else /* Other CPU */
-#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
-#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
+#define dmaor_read_reg(n) __raw_readw(SH_DMAC_BASE0 + DMAOR)
+#define dmaor_write_reg(n, data) __raw_writew(data, SH_DMAC_BASE0 + DMAOR)
 #endif
 
 static int dmte_irq_map[] __maybe_unused = {
@@ -53,37 +54,11 @@ static int dmte_irq_map[] __maybe_unused = {
 #endif
 };
 
-/* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
-#define DM_INC	0x00004000
-#define DM_DEC	0x00008000
-#define SM_INC	0x00001000
-#define SM_DEC	0x00002000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
-
-/* DMAOR definitions */
-#define DMAOR_AE	0x00000004
-#define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
-
 /*
  * Define the default configuration for dual address memory-memory transfer.
  * The 0x400 value represents auto-request, external->external.
  */
-#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
+#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_INDEX2VAL(XMIT_SZ_32BIT))
 
 /* DMA base address */
 static u32 dma_base_addr[] __maybe_unused = {
@@ -109,24 +84,4 @@ static u32 dma_base_addr[] __maybe_unused = {
 #endif
 };
 
-/* DMA register */
-#define SAR     0x00
-#define DAR     0x04
-#define TCR     0x08
-#define CHCR    0x0C
-#define DMAOR	0x40
-
-/*
- * for dma engine
- *
- * SuperH DMA mode
- */
-#define SHDMA_MIX_IRQ	(1 << 1)
-#define SHDMA_DMAOR1	(1 << 2)
-#define SHDMA_DMAE1		(1 << 3)
-
-struct sh_dmae_pdata {
-	unsigned int mode;
-};
-
 #endif /* __DMA_SH_H */
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index bdccbbf..d62abd1 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -243,16 +243,13 @@ struct dwarf_cie {
 
 	unsigned long cie_pointer;
 
-	struct list_head link;
-
 	unsigned long flags;
 #define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
 
-	/*
-	 * 'mod' will be non-NULL if this CIE came from a module's
-	 * .eh_frame section.
-	 */
-	struct module *mod;
+	/* linked-list entry if this CIE is from a module */
+	struct list_head link;
+
+	struct rb_node node;
 };
 
 /**
@@ -266,13 +263,11 @@ struct dwarf_fde {
 	unsigned long address_range;
 	unsigned char *instructions;
 	unsigned char *end;
+
+	/* linked-list entry if this FDE is from a module */
 	struct list_head link;
 
-	/*
-	 * 'mod' will be non-NULL if this FDE came from a module's
-	 * .eh_frame section.
-	 */
-	struct module *mod;
+	struct rb_node node;
 };
 
 /**
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
index ac04255..ce830fa 100644
--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -211,7 +211,9 @@ extern void __kernel_vsyscall;
 
 #define VSYSCALL_AUX_ENT					\
 	if (vdso_enabled)					\
-		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);	\
+	else							\
+		NEW_AUX_ENT(AT_IGNORE, 0);
 #else
 #define VSYSCALL_AUX_ENT
 #endif /* CONFIG_VSYSCALL */
@@ -219,7 +221,7 @@ extern void __kernel_vsyscall;
 #ifdef CONFIG_SH_FPU
 #define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
 #else
-#define FPU_AUX_ENT
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
 #endif
 
 extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
index 5ac1e40..6e7cea4 100644
--- a/arch/sh/include/asm/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
@@ -55,16 +55,29 @@ enum fixed_addresses {
 #define FIX_N_COLOURS 8
 	FIX_CMAP_BEGIN,
 	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
-	FIX_UNCACHED,
+
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
 #endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+	/*
+	 * FIX_IOREMAP entries are useful for mapping physical address
+	 * space before ioremap() is useable, e.g. really early in boot
+	 * before kmalloc() is working.
+	 */
+#define FIX_N_IOREMAPS	32
+	FIX_IOREMAP_BEGIN,
+	FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS,
+#endif
+
 	__end_of_fixed_addresses
 };
 
 extern void __set_fixmap(enum fixed_addresses idx,
 			 unsigned long phys, pgprot_t flags);
+extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags);
 
 #define set_fixmap(idx, phys) \
 		__set_fixmap(idx, phys, PAGE_KERNEL)
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
index fb6bbb9..06c4281 100644
--- a/arch/sh/include/asm/fpu.h
+++ b/arch/sh/include/asm/fpu.h
@@ -2,8 +2,8 @@
 #define __ASM_SH_FPU_H
 
 #ifndef __ASSEMBLY__
-#include <linux/preempt.h>
-#include <asm/ptrace.h>
+
+struct task_struct;
 
 #ifdef CONFIG_SH_FPU
 static inline void release_fpu(struct pt_regs *regs)
@@ -16,22 +16,23 @@ static inline void grab_fpu(struct pt_regs *regs)
 	regs->sr &= ~SR_FD;
 }
 
-struct task_struct;
-
 extern void save_fpu(struct task_struct *__tsk);
-void fpu_state_restore(struct pt_regs *regs);
+extern void restore_fpu(struct task_struct *__tsk);
+extern void fpu_state_restore(struct pt_regs *regs);
+extern void __fpu_state_restore(void);
 #else
-
-#define save_fpu(tsk)		do { } while (0)
-#define release_fpu(regs)	do { } while (0)
-#define grab_fpu(regs)		do { } while (0)
-#define fpu_state_restore(regs)	do { } while (0)
-
+#define save_fpu(tsk)			do { } while (0)
+#define restore_fpu(tsk)		do { } while (0)
+#define release_fpu(regs)		do { } while (0)
+#define grab_fpu(regs)			do { } while (0)
+#define fpu_state_restore(regs)		do { } while (0)
+#define __fpu_state_restore(regs)	do { } while (0)
 #endif
 
 struct user_regset;
 
 extern int do_fpu_inst(unsigned short, struct pt_regs *);
+extern int init_fpu(struct task_struct *);
 
 extern int fpregs_get(struct task_struct *target,
 		      const struct user_regset *regset,
@@ -65,18 +66,6 @@ static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
 	preempt_enable();
 }
 
-static inline int init_fpu(struct task_struct *tsk)
-{
-	if (tsk_used_math(tsk)) {
-		if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
-			unlazy_fpu(tsk, task_pt_regs(tsk));
-		return 0;
-	}
-
-	set_stopped_child_used_math(tsk);
-	return 0;
-}
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h
new file mode 100644
index 0000000..89890f6
--- /dev/null
+++ b/arch/sh/include/asm/hw_breakpoint.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_HW_BREAKPOINT_H
+#define __ASM_SH_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+#define __ARCH_HW_BREAKPOINT_H
+
+#include <linux/kdebug.h>
+#include <linux/types.h>
+
+struct arch_hw_breakpoint {
+	char		*name; /* Contains name of the symbol to set bkpt */
+	unsigned long	address;
+	u16		len;
+	u16		type;
+};
+
+enum {
+	SH_BREAKPOINT_READ	= (1 << 1),
+	SH_BREAKPOINT_WRITE	= (1 << 2),
+	SH_BREAKPOINT_RW	= SH_BREAKPOINT_READ | SH_BREAKPOINT_WRITE,
+
+	SH_BREAKPOINT_LEN_1	= (1 << 12),
+	SH_BREAKPOINT_LEN_2	= (1 << 13),
+	SH_BREAKPOINT_LEN_4	= SH_BREAKPOINT_LEN_1 | SH_BREAKPOINT_LEN_2,
+	SH_BREAKPOINT_LEN_8	= (1 << 14),
+};
+
+struct sh_ubc {
+	const char	*name;
+	unsigned int	num_events;
+	unsigned int	trap_nr;
+	void		(*enable)(struct arch_hw_breakpoint *, int);
+	void		(*disable)(struct arch_hw_breakpoint *, int);
+	void		(*enable_all)(unsigned long);
+	void		(*disable_all)(void);
+	unsigned long	(*active_mask)(void);
+	unsigned long	(*triggered_mask)(void);
+	void		(*clear_triggered_mask)(unsigned long);
+	struct clk	*clk;	/* optional interface clock / MSTP bit */
+};
+
+struct perf_event;
+struct task_struct;
+struct pmu;
+
+/* Maximum number of UBC channels */
+#define HBP_NUM		2
+
+static inline int hw_breakpoint_slots(int type)
+{
+	return HBP_NUM;
+}
+
+/* arch/sh/kernel/hw_breakpoint.c */
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+
+extern void arch_fill_perf_breakpoint(struct perf_event *bp);
+extern int register_sh_ubc(struct sh_ubc *);
+
+extern struct pmu perf_ops_bp;
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_HW_BREAKPOINT_H */
diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h
index 5d3ccae..855e945 100644
--- a/arch/sh/include/asm/hwblk.h
+++ b/arch/sh/include/asm/hwblk.h
@@ -58,13 +58,11 @@ void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int cnt);
 void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int cnt);
 
 /* allow clocks to enable and disable hardware blocks */
-#define SH_HWBLK_CLK(_name, _id, _parent, _hwblk, _flags)	\
-{							\
-	.name		= _name,			\
-	.id		= _id,				\
-	.parent		= _parent,			\
-	.arch_flags	= _hwblk,			\
-	.flags		= _flags,			\
+#define SH_HWBLK_CLK(_hwblk, _parent, _flags)	\
+[_hwblk] = {					\
+	.parent		= _parent,		\
+	.arch_flags	= _hwblk,		\
+	.flags		= _flags,		\
 }
 
 int sh_hwblk_clk_register(struct clk *clks, int nr);
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 026dd65..b237d52 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -22,6 +22,7 @@
  * for old compat code for I/O offseting to SuperIOs, all of which are
  * better handled through the machvec ioport mapping routines these days.
  */
+#include <linux/errno.h>
 #include <asm/cache.h>
 #include <asm/system.h>
 #include <asm/addrspace.h>
@@ -38,6 +39,8 @@
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
+#ifdef CONFIG_HAS_IOPORT
+
 #define inb(p)			sh_mv.mv_inb((p))
 #define inw(p)			sh_mv.mv_inw((p))
 #define inl(p)			sh_mv.mv_inl((p))
@@ -59,6 +62,8 @@
 #define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
 #define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
 
+#endif
+
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -79,16 +84,51 @@
 #define writel(v,a)		({ __raw_writel((v),(a)); mb(); })
 #define writeq(v,a)		({ __raw_writeq((v),(a)); mb(); })
 
-/* SuperH on-chip I/O functions */
-#define ctrl_inb		__raw_readb
-#define ctrl_inw		__raw_readw
-#define ctrl_inl		__raw_readl
-#define ctrl_inq		__raw_readq
+/*
+ * Legacy SuperH on-chip I/O functions
+ *
+ * These are all deprecated, all new (and especially cross-platform) code
+ * should be using the __raw_xxx() routines directly.
+ */
+static inline u8 __deprecated ctrl_inb(unsigned long addr)
+{
+	return __raw_readb(addr);
+}
+
+static inline u16 __deprecated ctrl_inw(unsigned long addr)
+{
+	return __raw_readw(addr);
+}
+
+static inline u32 __deprecated ctrl_inl(unsigned long addr)
+{
+	return __raw_readl(addr);
+}
+
+static inline u64 __deprecated ctrl_inq(unsigned long addr)
+{
+	return __raw_readq(addr);
+}
+
+static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
+{
+	__raw_writeb(v, addr);
+}
+
+static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
+{
+	__raw_writew(v, addr);
+}
+
+static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
+{
+	__raw_writel(v, addr);
+}
 
-#define ctrl_outb		__raw_writeb
-#define ctrl_outw		__raw_writew
-#define ctrl_outl		__raw_writel
-#define ctrl_outq		__raw_writeq
+static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
+{
+	__raw_writeq(v, addr);
+}
 
 extern unsigned long generic_io_base;
 
@@ -97,6 +137,28 @@ static inline void ctrl_delay(void)
 	__raw_readw(generic_io_base);
 }
 
+#define __BUILD_UNCACHED_IO(bwlq, type)					\
+static inline type read##bwlq##_uncached(unsigned long addr)		\
+{									\
+	type ret;							\
+	jump_to_uncached();						\
+	ret = __raw_read##bwlq(addr);					\
+	back_to_cached();						\
+	return ret;							\
+}									\
+									\
+static inline void write##bwlq##_uncached(type v, unsigned long addr)	\
+{									\
+	jump_to_uncached();						\
+	__raw_write##bwlq(v, addr);					\
+	back_to_cached();						\
+}
+
+__BUILD_UNCACHED_IO(b, u8)
+__BUILD_UNCACHED_IO(w, u16)
+__BUILD_UNCACHED_IO(l, u32)
+__BUILD_UNCACHED_IO(q, u64)
+
 #define __BUILD_MEMORY_STRING(bwlq, type)				\
 									\
 static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
@@ -182,6 +244,8 @@ __BUILD_MEMORY_STRING(q, u64)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_HAS_IOPORT
+
 /*
  * This function provides a method for the generic case where a
  * board-specific ioport_map simply needs to return the port + some
@@ -197,6 +261,8 @@ static inline void __set_io_port_base(unsigned long pbase)
 
 #define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
 
+#endif
+
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
 void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
@@ -233,29 +299,22 @@ unsigned long long poke_real_address_q(unsigned long long addr,
  * doesn't exist, so everything must go through page tables.
  */
 #ifdef CONFIG_MMU
-void __iomem *__ioremap_caller(unsigned long offset, unsigned long size,
-			       unsigned long flags, void *caller);
+void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
+			       pgprot_t prot, void *caller);
 void __iounmap(void __iomem *addr);
 
 static inline void __iomem *
-__ioremap(unsigned long offset, unsigned long size, unsigned long flags)
+__ioremap(phys_addr_t offset, unsigned long size, pgprot_t prot)
 {
-	return __ioremap_caller(offset, size, flags, __builtin_return_address(0));
+	return __ioremap_caller(offset, size, prot, __builtin_return_address(0));
 }
 
 static inline void __iomem *
-__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
+__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
 {
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
-	unsigned long last_addr = offset + size - 1;
-#endif
-	void __iomem *ret;
-
-	ret = __ioremap_trapped(offset, size);
-	if (ret)
-		return ret;
+#ifdef CONFIG_29BIT
+	phys_addr_t last_addr = offset + size - 1;
 
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
 	/*
 	 * For P1 and P2 space this is trivial, as everything is already
 	 * mapped. Uncached access for P1 addresses are done through P2.
@@ -263,7 +322,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	 * mapping must be done by the PMB or by using page tables.
 	 */
 	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
-		if (unlikely(flags & _PAGE_CACHABLE))
+		if (unlikely(pgprot_val(prot) & _PAGE_CACHABLE))
 			return (void __iomem *)P1SEGADDR(offset);
 
 		return (void __iomem *)P2SEGADDR(offset);
@@ -274,26 +333,67 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 		return (void __iomem *)P4SEGADDR(offset);
 #endif
 
-	return __ioremap(offset, size, flags);
+	return NULL;
+}
+
+static inline void __iomem *
+__ioremap_mode(phys_addr_t offset, unsigned long size, pgprot_t prot)
+{
+	void __iomem *ret;
+
+	ret = __ioremap_trapped(offset, size);
+	if (ret)
+		return ret;
+
+	ret = __ioremap_29bit(offset, size, prot);
+	if (ret)
+		return ret;
+
+	return __ioremap(offset, size, prot);
 }
 #else
-#define __ioremap(offset, size, flags)		((void __iomem *)(offset))
-#define __ioremap_mode(offset, size, flags)	((void __iomem *)(offset))
+#define __ioremap(offset, size, prot)		((void __iomem *)(offset))
+#define __ioremap_mode(offset, size, prot)	((void __iomem *)(offset))
 #define __iounmap(addr)				do { } while (0)
 #endif /* CONFIG_MMU */
 
-#define ioremap(offset, size)				\
-	__ioremap_mode((offset), (size), 0)
-#define ioremap_nocache(offset, size)			\
-	__ioremap_mode((offset), (size), 0)
-#define ioremap_cache(offset, size)			\
-	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
-#define p3_ioremap(offset, size, flags)			\
-	__ioremap((offset), (size), (flags))
-#define ioremap_prot(offset, size, flags)		\
-	__ioremap_mode((offset), (size), (flags))
-#define iounmap(addr)					\
-	__iounmap((addr))
+static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+{
+	return __ioremap_mode(offset, size, PAGE_KERNEL_NOCACHE);
+}
+
+static inline void __iomem *
+ioremap_cache(phys_addr_t offset, unsigned long size)
+{
+	return __ioremap_mode(offset, size, PAGE_KERNEL);
+}
+
+#ifdef CONFIG_HAVE_IOREMAP_PROT
+static inline void __iomem *
+ioremap_prot(phys_addr_t offset, unsigned long size, unsigned long flags)
+{
+	return __ioremap_mode(offset, size, __pgprot(flags));
+}
+#endif
+
+#ifdef CONFIG_IOREMAP_FIXED
+extern void __iomem *ioremap_fixed(phys_addr_t, unsigned long, pgprot_t);
+extern int iounmap_fixed(void __iomem *);
+extern void ioremap_fixed_init(void);
+#else
+static inline void __iomem *
+ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
+{
+	BUG();
+	return NULL;
+}
+
+static inline void ioremap_fixed_init(void) { }
+static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
+#endif
+
+#define ioremap_nocache	ioremap
+#define iounmap		__iounmap
 
 #define maybebadio(port) \
 	printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
index 1e5d375..491df93 100644
--- a/arch/sh/include/asm/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
@@ -38,5 +38,6 @@ void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
 
 void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
 void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
+void IO_CONCAT(__IO_PREFIX,mem_init)(void);
 
 #undef __IO_PREFIX
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
index df8e150..02c2f01 100644
--- a/arch/sh/include/asm/irq.h
+++ b/arch/sh/include/asm/irq.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_SH_IRQ_H
 #define __ASM_SH_IRQ_H
 
+#include <linux/cpumask.h>
 #include <asm/machvec.h>
 
 /*
@@ -12,6 +13,14 @@
 #define NR_IRQS_LEGACY		8	/* Legacy external IRQ0-7 */
 
 /*
+ * This is a special IRQ number for indicating that no IRQ has been
+ * triggered and to simply ignore the IRQ dispatch. This is a special
+ * case that can happen with IRQ auto-distribution when multiple CPUs
+ * are woken up and signalled in parallel.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/*
  * Convert back and forth between INTEVT and IRQ values.
  */
 #ifdef CONFIG_CPU_HAS_INTEVT
@@ -42,6 +51,8 @@ static inline int generic_irq_demux(int irq)
 #define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
 
 void init_IRQ(void);
+void migrate_irqs(void);
+
 asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 #ifdef CONFIG_IRQSTACKS
@@ -53,6 +64,14 @@ extern void irq_ctx_exit(int cpu);
 # define irq_ctx_exit(cpu) do { } while (0)
 #endif
 
+#ifdef CONFIG_INTC_BALANCING
+extern unsigned int irq_lookup(unsigned int irq);
+extern void irq_finish(unsigned int irq);
+#else
+#define irq_lookup(irq)		(irq)
+#define irq_finish(irq)		do { } while (0)
+#endif
+
 #include <asm-generic/irq.h>
 #ifdef CONFIG_CPU_SH5
 #include <cpu/irq.h>
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 985219f..5f6d2e9 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -6,6 +6,8 @@ enum die_val {
 	DIE_TRAP,
 	DIE_NMI,
 	DIE_OOPS,
+	DIE_BREAKPOINT,
+	DIE_SSTEP,
 };
 
 #endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
index 765a5e1..ad6ef8a 100644
--- a/arch/sh/include/asm/kexec.h
+++ b/arch/sh/include/asm/kexec.h
@@ -26,6 +26,10 @@
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_SH
 
+#ifdef CONFIG_KEXEC
+/* arch/sh/kernel/machine_kexec.c */
+void reserve_crashkernel(void);
+
 static inline void crash_setup_regs(struct pt_regs *newregs,
 				    struct pt_regs *oldregs)
 {
@@ -59,4 +63,8 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 		newregs->pc = (unsigned long)current_text_addr();
 	}
 }
+#else
+static inline void reserve_crashkernel(void) { }
+#endif /* CONFIG_KEXEC */
+
 #endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
deleted file mode 100644
index 9b437f6..0000000
--- a/arch/sh/include/asm/lmb.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_LMB_H
-#define __ASM_SH_LMB_H
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index 9c30955..a0b0cf7 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -19,6 +19,10 @@ struct sh_machine_vector {
 	const char *mv_name;
 	int mv_nr_irqs;
 
+	int (*mv_irq_demux)(int irq);
+	void (*mv_init_irq)(void);
+
+#ifdef CONFIG_HAS_IOPORT
 	u8 (*mv_inb)(unsigned long);
 	u16 (*mv_inw)(unsigned long);
 	u32 (*mv_inl)(unsigned long);
@@ -40,15 +44,14 @@ struct sh_machine_vector {
 	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
 	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
 
-	int (*mv_irq_demux)(int irq);
-
-	void (*mv_init_irq)(void);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
+#endif
 
 	int (*mv_clk_init)(void);
 	int (*mv_mode_pins)(void);
+
+	void (*mv_mem_init)(void);
 };
 
 extern struct sh_machine_vector sh_mv;
diff --git a/arch/sh/include/asm/memblock.h b/arch/sh/include/asm/memblock.h
new file mode 100644
index 0000000..dfe683b
--- /dev/null
+++ b/arch/sh/include/asm/memblock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_MEMBLOCK_H
+#define __ASM_SH_MEMBLOCK_H
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* __ASM_SH_MEMBLOCK_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
index c7426ad..56e4418 100644
--- a/arch/sh/include/asm/mmu.h
+++ b/arch/sh/include/asm/mmu.h
@@ -11,7 +11,9 @@
 
 #define PMB_ADDR		0xf6100000
 #define PMB_DATA		0xf7100000
-#define PMB_ENTRY_MAX		16
+
+#define NR_PMB_ENTRIES		16
+
 #define PMB_E_MASK		0x0000000f
 #define PMB_E_SHIFT		8
 
@@ -25,11 +27,15 @@
 #define PMB_C			0x00000008
 #define PMB_WT			0x00000001
 #define PMB_UB			0x00000200
+#define PMB_CACHE_MASK		(PMB_C | PMB_WT | PMB_UB)
 #define PMB_V			0x00000100
 
 #define PMB_NO_ENTRY		(-1)
 
 #ifndef __ASSEMBLY__
+#include <linux/errno.h>
+#include <linux/threads.h>
+#include <asm/page.h>
 
 /* Default "unsigned long" context */
 typedef unsigned long mm_context_id_t[NR_CPUS];
@@ -47,29 +53,54 @@ typedef struct {
 #endif
 } mm_context_t;
 
-struct pmb_entry;
+#ifdef CONFIG_PMB
+/* arch/sh/mm/pmb.c */
+bool __in_29bit_mode(void);
 
-struct pmb_entry {
-	unsigned long vpn;
-	unsigned long ppn;
-	unsigned long flags;
+void pmb_init(void);
+int pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
+		     unsigned long size, pgprot_t prot);
+void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
+			       pgprot_t prot, void *caller);
+int pmb_unmap(void __iomem *addr);
 
-	/*
-	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
-	 * PMB_NO_ENTRY to search for a free one
-	 */
-	int entry;
+#else
 
-	struct pmb_entry *next;
-	/* Adjacent entry link for contiguous multi-entry mappings */
-	struct pmb_entry *link;
-};
+static inline int
+pmb_bolt_mapping(unsigned long virt, phys_addr_t phys,
+		 unsigned long size, pgprot_t prot)
+{
+	return -EINVAL;
+}
+
+static inline void __iomem *
+pmb_remap_caller(phys_addr_t phys, unsigned long size,
+		 pgprot_t prot, void *caller)
+{
+	return NULL;
+}
+
+static inline int pmb_unmap(void __iomem *addr)
+{
+	return -EINVAL;
+}
+
+#define pmb_init(addr)		do { } while (0)
+
+#ifdef CONFIG_29BIT
+#define __in_29bit_mode()	(1)
+#else
+#define __in_29bit_mode()	(0)
+#endif
+
+#endif /* CONFIG_PMB */
+
+static inline void __iomem *
+pmb_remap(phys_addr_t phys, unsigned long size, pgprot_t prot)
+{
+	return pmb_remap_caller(phys, size, prot, __builtin_return_address(0));
+}
 
-/* arch/sh/mm/pmb.c */
-long pmb_remap(unsigned long virt, unsigned long phys,
-	       unsigned long size, unsigned long flags);
-void pmb_unmap(unsigned long addr);
-int pmb_init(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __MMU_H */
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 41080b1..384c747 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -158,7 +158,7 @@ static inline void enable_mmu(void)
 	unsigned int cpu = smp_processor_id();
 
 	/* Enable MMU */
-	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+	__raw_writel(MMU_CONTROL_INIT, MMUCR);
 	ctrl_barrier();
 
 	if (asid_cache(cpu) == NO_CONTEXT)
@@ -171,9 +171,9 @@ static inline void disable_mmu(void)
 {
 	unsigned long cr;
 
-	cr = ctrl_inl(MMUCR);
+	cr = __raw_readl(MMUCR);
 	cr &= ~MMU_CONTROL_INIT;
-	ctrl_outl(cr, MMUCR);
+	__raw_writel(cr, MMUCR);
 
 	ctrl_barrier();
 }
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
index 8ef800c..10e2e17 100644
--- a/arch/sh/include/asm/mmu_context_32.h
+++ b/arch/sh/include/asm/mmu_context_32.h
@@ -49,11 +49,11 @@ static inline unsigned long get_asid(void)
 /* MMU_TTB is used for optimizing the fault handling. */
 static inline void set_TTB(pgd_t *pgd)
 {
-	ctrl_outl((unsigned long)pgd, MMU_TTB);
+	__raw_writel((unsigned long)pgd, MMU_TTB);
 }
 
 static inline pgd_t *get_TTB(void)
 {
-	return (pgd_t *)ctrl_inl(MMU_TTB);
+	return (pgd_t *)__raw_readl(MMU_TTB);
 }
 #endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
index 7f5363b..8887baf 100644
--- a/arch/sh/include/asm/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
@@ -42,9 +42,10 @@ setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 void __init plat_mem_setup(void);
 
 /* arch/sh/kernel/setup.c */
-void __init setup_bootmem_allocator(unsigned long start_pfn);
 void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 			       unsigned long end_pfn);
+/* arch/sh/mm/init.c */
+void __init allocate_pgdat(unsigned int nid);
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
index 068bf16..b7927de 100644
--- a/arch/sh/include/asm/module.h
+++ b/arch/sh/include/asm/module.h
@@ -1,7 +1,22 @@
 #ifndef _ASM_SH_MODULE_H
 #define _ASM_SH_MODULE_H
 
-#include <asm-generic/module.h>
+struct mod_arch_specific {
+#ifdef CONFIG_DWARF_UNWINDER
+	struct list_head fde_list;
+	struct list_head cie_list;
+#endif
+};
+
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#else
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
 # ifdef CONFIG_CPU_SH2
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 81bffc0..fb703d1 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -45,10 +45,11 @@
 #endif
 
 #ifndef __ASSEMBLY__
+#include <asm/uncached.h>
 
 extern unsigned long shm_align_mask;
 extern unsigned long max_low_pfn, min_low_pfn;
-extern unsigned long memory_start, memory_end;
+extern unsigned long memory_start, memory_end, memory_limit;
 
 static inline unsigned long
 pages_do_alias(unsigned long addr1, unsigned long addr2)
@@ -56,7 +57,6 @@ pages_do_alias(unsigned long addr1, unsigned long addr2)
 	return (addr1 ^ addr2) & shm_align_mask;
 }
 
-
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, void *from);
 
@@ -88,7 +88,7 @@ typedef struct { unsigned long pgd; } pgd_t;
 #define __pte(x)	((pte_t) { (x) } )
 #else
 typedef struct { unsigned long long pte_low; } pte_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
 typedef struct { unsigned long pgd; } pgd_t;
 #define pte_val(x)	((x).pte_low)
 #define __pte(x)	((pte_t) { (x) } )
@@ -127,17 +127,25 @@ typedef struct page *pgtable_t;
  * is not visible (it is part of the PMB mapping) and so needs to be
  * added or subtracted as required.
  */
-#if defined(CONFIG_PMB_FIXED)
-/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
-#define PMB_OFFSET	(PAGE_OFFSET - PXSEG(__MEMORY_START))
-#define __pa(x)	((unsigned long)(x) - PMB_OFFSET)
-#define __va(x)	((void *)((unsigned long)(x) + PMB_OFFSET))
-#elif defined(CONFIG_32BIT)
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
+#ifdef CONFIG_PMB
+#define ___pa(x)	((x)-PAGE_OFFSET+__MEMORY_START)
+#define ___va(x)	((x)+PAGE_OFFSET-__MEMORY_START)
+#else
+#define ___pa(x)	((x)-PAGE_OFFSET)
+#define ___va(x)	((x)+PAGE_OFFSET)
+#endif
+
+#ifndef __ASSEMBLY__
+#define __pa(x)		___pa((unsigned long)x)
+#define __va(x)		(void *)___va((unsigned long)x)
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_UNCACHED_MAPPING
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + uncached_start)
+#define CAC_ADDR(addr)		((addr) - uncached_start + PAGE_OFFSET)
 #else
-#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
-#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
+#define UNCAC_ADDR(addr)	((addr))
+#define CAC_ADDR(addr)		((addr))
 #endif
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 67f3999..8bd952f 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -15,20 +15,49 @@
  */
 struct pci_channel {
 	struct pci_channel	*next;
+	struct pci_bus		*bus;
 
 	struct pci_ops		*pci_ops;
-	struct resource		*io_resource;
-	struct resource		*mem_resource;
+
+	struct resource		*resources;
+	unsigned int		nr_resources;
 
 	unsigned long		io_offset;
 	unsigned long		mem_offset;
 
 	unsigned long		reg_base;
-
 	unsigned long		io_map_base;
+
+	unsigned int		index;
+	unsigned int		need_domain_info;
+
+	/* Optional error handling */
+	struct timer_list	err_timer, serr_timer;
+	unsigned int		err_irq, serr_irq;
 };
 
-extern void register_pci_controller(struct pci_channel *hose);
+/* arch/sh/drivers/pci/pci.c */
+extern int register_pci_controller(struct pci_channel *hose);
+extern void pcibios_report_status(unsigned int status_mask, int warn);
+
+/* arch/sh/drivers/pci/common.c */
+extern int early_read_config_byte(struct pci_channel *hose, int top_bus,
+				  int bus, int devfn, int offset, u8 *value);
+extern int early_read_config_word(struct pci_channel *hose, int top_bus,
+				  int bus, int devfn, int offset, u16 *value);
+extern int early_read_config_dword(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u32 *value);
+extern int early_write_config_byte(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u8 value);
+extern int early_write_config_word(struct pci_channel *hose, int top_bus,
+				   int bus, int devfn, int offset, u16 value);
+extern int early_write_config_dword(struct pci_channel *hose, int top_bus,
+				    int bus, int devfn, int offset, u32 value);
+extern void pcibios_enable_timers(struct pci_channel *hose);
+extern unsigned int pcibios_handle_status_errors(unsigned long addr,
+				 unsigned int status, struct pci_channel *hose);
+extern int pci_is_66mhz_capable(struct pci_channel *hose,
+				int top_bus, int current_bus);
 
 extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
 
@@ -54,25 +83,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(dma_ops->is_phys)
 
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_DMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-#endif
-
 #ifdef CONFIG_PCI
 /*
  * None of the SH PCI controllers support MWI, it is always treated as a
@@ -99,20 +109,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 }
 #endif
 
-#ifdef CONFIG_SUPERH32
-/*
- * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
- * at the end of the address space in a special non-translatable area.
- */
-#define PCI_MEM_FIXED_START	0xfd000000
-#define PCI_MEM_FIXED_END	(PCI_MEM_FIXED_START + 0x01000000)
-
-#define is_pci_memory_fixed_range(s, e)	\
-	((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
-#else
-#define is_pci_memory_fixed_range(s, e)	(0)
-#endif
-
 /* Board-specific fixup routines. */
 int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
 
@@ -122,6 +118,14 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 				    struct pci_bus_region *region);
 
+#define pci_domain_nr(bus) ((struct pci_channel *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_channel *hose = bus->sysdata;
+	return hose->need_domain_info;
+}
+
 /* Chances are this interrupt is wired PC-style ...  */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 63ca37b..8c00785 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -4,8 +4,16 @@
 #include <linux/quicklist.h>
 #include <asm/page.h>
 
-#define QUICK_PGD 0	/* We preserve special mappings over free */
-#define QUICK_PT 1	/* Other page table pages that are zero on free */
+#define QUICK_PT 0	/* Other page table pages that are zero on free */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+#if PAGETABLE_LEVELS > 2
+extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
+extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
+extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
+#endif
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
 				       pte_t *pte)
@@ -20,28 +28,9 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
 }
 #define pmd_pgtable(pmd) pmd_page(pmd)
 
-static inline void pgd_ctor(void *x)
-{
-	pgd_t *pgd = x;
-
-	memcpy(pgd + USER_PTRS_PER_PGD,
-	       swapper_pg_dir + USER_PTRS_PER_PGD,
-	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-}
-
 /*
  * Allocate and free page tables.
  */
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	quicklist_free(QUICK_PGD, NULL, pgd);
-}
-
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
 					  unsigned long address)
 {
@@ -81,7 +70,6 @@ do {							\
 
 static inline void check_pgt_cache(void)
 {
-	quicklist_trim(QUICK_PGD, NULL, 25, 16);
 	quicklist_trim(QUICK_PT, NULL, 25, 16);
 }
 
diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h
new file mode 100644
index 0000000..19bd89d
--- /dev/null
+++ b/arch/sh/include/asm/pgtable-2level.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_SH_PGTABLE_2LEVEL_H
+#define __ASM_SH_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * traditional two-level paging structure
+ */
+#define PAGETABLE_LEVELS	2
+
+/* PTE bits */
+#define PTE_MAGNITUDE		2	/* 32-bit PTEs */
+
+#define PTE_SHIFT		PAGE_SHIFT
+#define PTE_BITS		(PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT		(PTE_SHIFT + PTE_BITS)
+
+#define PTRS_PER_PGD		(PAGE_SIZE / (1 << PTE_MAGNITUDE))
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+
+#endif /* __ASM_SH_PGTABLE_2LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h
new file mode 100644
index 0000000..249a985
--- /dev/null
+++ b/arch/sh/include/asm/pgtable-3level.h
@@ -0,0 +1,56 @@
+#ifndef __ASM_SH_PGTABLE_3LEVEL_H
+#define __ASM_SH_PGTABLE_3LEVEL_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Some cores need a 3-level page table layout, for example when using
+ * 64-bit PTEs and 4K pages.
+ */
+#define PAGETABLE_LEVELS	3
+
+#define PTE_MAGNITUDE		3	/* 64-bit PTEs on SH-X2 TLB */
+
+/* PGD bits */
+#define PGDIR_SHIFT		30
+
+#define PTRS_PER_PGD		4
+#define USER_PTRS_PER_PGD	2
+
+/* PMD bits */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT - PTE_MAGNITUDE))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+#define PTRS_PER_PMD	((1 << PGDIR_SHIFT) / PMD_SIZE)
+
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
+
+typedef struct { unsigned long long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+	return pud_val(pud);
+}
+
+#define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+#define pud_none(x)	(!pud_val(x))
+#define pud_present(x)	(pud_val(x))
+#define pud_clear(xp)	do { set_pud(xp, __pud(0)); } while (0)
+#define	pud_bad(x)	(pud_val(x) & ~PAGE_MASK)
+
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+
+#endif /* __ASM_SH_PGTABLE_3LEVEL_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index ba3046e..02f7745 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -12,7 +12,11 @@
 #ifndef __ASM_SH_PGTABLE_H
 #define __ASM_SH_PGTABLE_H
 
-#include <asm-generic/pgtable-nopmd.h>
+#ifdef CONFIG_X2TLB
+#include <asm/pgtable-3level.h>
+#else
+#include <asm/pgtable-2level.h>
+#endif
 #include <asm/page.h>
 
 #ifndef __ASSEMBLY__
@@ -51,28 +55,12 @@ static inline unsigned long long neff_sign_extend(unsigned long val)
 #define	NPHYS_SIGN	(1LL << (NPHYS - 1))
 #define	NPHYS_MASK	(-1LL << NPHYS)
 
-/*
- * traditional two-level paging structure
- */
-/* PTE bits */
-#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64)
-# define PTE_MAGNITUDE	3	/* 64-bit PTEs on extended mode SH-X2 TLB */
-#else
-# define PTE_MAGNITUDE	2	/* 32-bit PTEs */
-#endif
-#define PTE_SHIFT	PAGE_SHIFT
-#define PTE_BITS	(PTE_SHIFT - PTE_MAGNITUDE)
-
-/* PGD bits */
-#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
 /* Entries per level */
 #define PTRS_PER_PTE	(PAGE_SIZE / (1 << PTE_MAGNITUDE))
-#define PTRS_PER_PGD	(PAGE_SIZE / sizeof(pgd_t))
 
-#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
 #define FIRST_USER_ADDRESS	0
 
 #define PHYS_ADDR_MASK29		0x1fffffff
@@ -153,9 +141,9 @@ typedef pte_t *pte_addr_t;
 #define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
 
 /*
- * No page table caches to initialise
+ * Initialise the page table caches
  */
-#define pgtable_cache_init()	do { } while (0)
+extern void pgtable_cache_init(void);
 
 struct vm_area_struct;
 
@@ -165,8 +153,9 @@ extern void __update_tlb(struct vm_area_struct *vma,
 			 unsigned long address, pte_t pte);
 
 static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
+	pte_t pte = *ptep;
 	__update_cache(vma, address, pte);
 	__update_tlb(vma, address, pte);
 }
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 5003ee8..e172d69 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -71,6 +71,8 @@
 #define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
 #define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
 
+#define _PAGE_EXT_WIRED		0x4000	/* software: Wire TLB entry */
+
 /* Wrapper for extended mode pgprot twiddling */
 #define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
 
@@ -141,12 +143,14 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
 # elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
 #  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
 # endif
+# define _PAGE_WIRED	(_PAGE_EXT(_PAGE_EXT_WIRED))
 #else
 # if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
 #  define _PAGE_SZHUGE	(_PAGE_SZ1)
 # elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
 #  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
 # endif
+# define _PAGE_WIRED	(0)
 #endif
 
 /*
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index 17cdbec..0ee4677 100644
--- a/arch/sh/include/asm/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -43,11 +43,6 @@ static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
 }
 #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
-static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
-{
-	pmd_val(*pmdp) = (unsigned long) ptep;
-}
-
 /*
  * PGD defines. Top level.
  */
@@ -128,8 +123,21 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 #define _PAGE_DIRTY	0x400  /* software: page accessed in write */
 #define _PAGE_ACCESSED	0x800  /* software: page referenced */
 
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+/*
+ * We can use the sign-extended bits in the PTEL to get 32 bits of
+ * software flags. This works for now because no implementations uses
+ * anything above the PPN field.
+ */
+#define _PAGE_WIRED	_PAGE_EXT(0x001) /* software: wire the tlb entry */
+
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PRESENT | _PAGE_FILE | _PAGE_SHARED | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED)
+
 /* Mask which drops software flags */
-#define _PAGE_FLAGS_HARDWARE_MASK	0xfffffffffffff3dbLL
+#define _PAGE_FLAGS_HARDWARE_MASK	(NEFF_MASK & ~(_PAGE_CLEAR_FLAGS))
 
 /*
  * HugeTLB support
@@ -203,12 +211,6 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 #define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
 
 /*
- * Handling allocation failures during page table setup.
- */
-extern void __handle_bad_pmd_kernel(pmd_t * pmd);
-#define __handle_bad_pmd(x)	__handle_bad_pmd_kernel(x)
-
-/*
  * PTE level access routines.
  *
  * Note1:
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 017e0c1..0a58cb2 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -85,6 +85,10 @@ struct sh_cpuinfo {
 	struct tlb_info itlb;
 	struct tlb_info dtlb;
 
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+#endif
+
 	unsigned long flags;
 } __attribute__ ((aligned(L1_CACHE_BYTES)));
 
@@ -98,13 +102,37 @@ extern struct sh_cpuinfo cpu_data[];
 
 /* Forward decl */
 struct seq_operations;
+struct task_struct;
 
 extern struct pt_regs fake_swapper_regs;
 
+extern void cpu_init(void);
+extern void cpu_probe(void);
+
+/* arch/sh/kernel/process.c */
+extern unsigned int xstate_size;
+extern void free_thread_xstate(struct task_struct *);
+extern struct kmem_cache *task_xstate_cachep;
+
+/* arch/sh/mm/alignment.c */
+extern int get_unalign_ctl(struct task_struct *, unsigned long addr);
+extern int set_unalign_ctl(struct task_struct *, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, addr)	get_unalign_ctl((tsk), (addr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+/* arch/sh/mm/init.c */
+extern unsigned int mem_init_done;
+
 /* arch/sh/kernel/setup.c */
 const char *get_cpu_subtype(struct sh_cpuinfo *c);
 extern const struct seq_operations cpuinfo_op;
 
+/* thread_struct flags */
+#define SH_THREAD_UAC_NOPRINT	(1 << 0)
+#define SH_THREAD_UAC_SIGBUS	(1 << 1)
+#define SH_THREAD_UAC_MASK	(SH_THREAD_UAC_NOPRINT | SH_THREAD_UAC_SIGBUS)
+
 /* processor boot mode configuration */
 #define MODE_PIN0 (1 << 0)
 #define MODE_PIN1 (1 << 1)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 1f3d6fa..61a445d 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -14,6 +14,7 @@
 #include <asm/page.h>
 #include <asm/types.h>
 #include <asm/ptrace.h>
+#include <asm/hw_breakpoint.h>
 
 /*
  * Default implementation of macro that returns current
@@ -26,8 +27,6 @@
 #define CCN_CVR		0xff000040
 #define CCN_PRR		0xff000044
 
-asmlinkage void __init sh_cpu_init(void);
-
 /*
  * User space process size: 2GB.
  *
@@ -90,9 +89,9 @@ struct sh_fpu_soft_struct {
 	unsigned long entry_pc;
 };
 
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	struct sh_fpu_soft_struct soft;
+union thread_xstate {
+	struct sh_fpu_hard_struct hardfpu;
+	struct sh_fpu_soft_struct softfpu;
 };
 
 struct thread_struct {
@@ -100,38 +99,30 @@ struct thread_struct {
 	unsigned long sp;
 	unsigned long pc;
 
-	/* Hardware debugging registers */
-	unsigned long ubc_pc;
+	/* Various thread flags, see SH_THREAD_xxx */
+	unsigned long flags;
 
-	/* floating point info */
-	union sh_fpu_union fpu;
+	/* Save middle states of ptrace breakpoints */
+	struct perf_event *ptrace_bps[HBP_NUM];
 
 #ifdef CONFIG_SH_DSP
 	/* Dsp status information */
 	struct sh_dsp_struct dsp_status;
 #endif
-};
 
-/* Count of active tasks with UBC settings */
-extern int ubc_usercnt;
+	/* Extended processor state */
+	union thread_xstate *xstate;
+};
 
 #define INIT_THREAD  {						\
 	.sp = sizeof(init_stack) + (long) &init_stack,		\
+	.flags = 0,						\
 }
 
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-#define start_thread(_regs, new_pc, new_sp)	 \
-	set_fs(USER_DS);			 \
-	_regs->pr = 0;				 \
-	_regs->sr = SR_FD;	/* User mode. */ \
-	_regs->pc = new_pc;			 \
-	_regs->regs[15] = new_sp
-
 /* Forward declaration, a strange C thing */
 struct task_struct;
-struct mm_struct;
+
+extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp);
 
 /* Free all resources held by a thread. */
 extern void release_thread(struct task_struct *);
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
index 5727d31..621bc46 100644
--- a/arch/sh/include/asm/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -87,26 +87,31 @@ struct sh_fpu_hard_struct {
 	/* long status; * software status information */
 };
 
-#if 0
 /* Dummy fpu emulator  */
 struct sh_fpu_soft_struct {
-	unsigned long long fp_regs[32];
+	unsigned long fp_regs[64];
 	unsigned int fpscr;
 	unsigned char lookahead;
 	unsigned long entry_pc;
 };
-#endif
 
-union sh_fpu_union {
-	struct sh_fpu_hard_struct hard;
-	/* 'hard' itself only produces 32 bit alignment, yet we need
-	   to access it using 64 bit load/store as well. */
+union thread_xstate {
+	struct sh_fpu_hard_struct hardfpu;
+	struct sh_fpu_soft_struct softfpu;
+	/*
+	 * The structure definitions only produce 32 bit alignment, yet we need
+	 * to access them using 64 bit load/store as well.
+	 */
 	unsigned long long alignment_dummy;
 };
 
 struct thread_struct {
 	unsigned long sp;
 	unsigned long pc;
+
+	/* Various thread flags, see SH_THREAD_xxx */
+	unsigned long flags;
+
 	/* This stores the address of the pt_regs built during a context
 	   switch, or of the register save area built for a kernel mode
 	   exception.  It is used for backtracing the stack of a sleeping task
@@ -122,7 +127,7 @@ struct thread_struct {
 	/* Hardware debugging registers may come here */
 
 	/* floating point info */
-	union sh_fpu_union fpu;
+	union thread_xstate *xstate;
 };
 
 #define INIT_MMAP \
@@ -137,7 +142,7 @@ struct thread_struct {
 	.trap_no	= 0,			\
 	.error_code	= 0,			\
 	.address	= 0,			\
-	.fpu		= { { { 0, } }, }	\
+	.flags		= 0,			\
 }
 
 /*
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index 1dc12cb..2168fde 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -102,13 +102,15 @@ struct pt_dspregs {
 #define	PTRACE_GETDSPREGS	55	/* DSP registers */
 #define	PTRACE_SETDSPREGS	56
 
-#define PT_TEXT_END_ADDR 	240
-#define PT_TEXT_ADDR 		244	/* &(struct user)->start_code */
-#define PT_DATA_ADDR 		248	/* &(struct user)->start_data */
+#define PT_TEXT_END_ADDR	240
+#define PT_TEXT_ADDR		244	/* &(struct user)->start_code */
+#define PT_DATA_ADDR		248	/* &(struct user)->start_data */
 #define PT_TEXT_LEN		252
 
 #ifdef __KERNEL__
 #include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/system.h>
 
 #define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
 #define instruction_pointer(regs)	((unsigned long)(regs)->pc)
@@ -121,8 +123,12 @@ extern void show_regs(struct pt_regs *);
 struct task_struct;
 
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
+
+struct perf_event;
+struct perf_sample_data;
+
+extern void ptrace_triggered(struct perf_event *bp, int nmi,
+		      struct perf_sample_data *data, struct pt_regs *regs);
 
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
@@ -131,10 +137,8 @@ static inline unsigned long profile_pc(struct pt_regs *regs)
 {
 	unsigned long pc = instruction_pointer(regs);
 
-#ifdef P2SEG
-	if (pc >= P2SEG && pc < P3SEG)
-		pc -= 0x20000000;
-#endif
+	if (virt_addr_uncached(pc))
+		return CAC_ADDR(pc);
 
 	return pc;
 }
diff --git a/arch/sh/include/asm/reboot.h b/arch/sh/include/asm/reboot.h
new file mode 100644
index 0000000..b3da0c6
--- /dev/null
+++ b/arch/sh/include/asm/reboot.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_REBOOT_H
+#define __ASM_SH_REBOOT_H
+
+#include <linux/kdebug.h>
+
+struct pt_regs;
+
+struct machine_ops {
+	void (*restart)(char *cmd);
+	void (*halt)(void);
+	void (*power_off)(void);
+	void (*shutdown)(void);
+	void (*crash_shutdown)(struct pt_regs *);
+};
+
+extern struct machine_ops machine_ops;
+
+/* arch/sh/kernel/machine_kexec.c */
+void native_machine_crash_shutdown(struct pt_regs *regs);
+
+#endif /* __ASM_SH_REBOOT_H */
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
index ce37435..01fa17a 100644
--- a/arch/sh/include/asm/setup.h
+++ b/arch/sh/include/asm/setup.h
@@ -18,8 +18,8 @@
 /* ... */
 #define COMMAND_LINE ((char *) (PARAM+0x100))
 
-int setup_early_printk(char *);
 void sh_mv_setup(void);
+void check_for_initrd(void);
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
index d9c96d7..95714c2 100644
--- a/arch/sh/include/asm/sh_bios.h
+++ b/arch/sh/include/asm/sh_bios.h
@@ -1,18 +1,27 @@
 #ifndef __ASM_SH_BIOS_H
 #define __ASM_SH_BIOS_H
 
+#ifdef CONFIG_SH_STANDARD_BIOS
+
 /*
  * Copyright (C) 2000 Greg Banks, Mitch Davis
  * C API to interface to the standard LinuxSH BIOS
  * usually from within the early stages of kernel boot.
  */
-
-
 extern void sh_bios_console_write(const char *buf, unsigned int len);
-extern void sh_bios_char_out(char ch);
 extern void sh_bios_gdb_detach(void);
 
 extern void sh_bios_get_node_addr(unsigned char *node_addr);
 extern void sh_bios_shutdown(unsigned int how);
 
+extern void sh_bios_vbr_init(void);
+extern void sh_bios_vbr_reload(void);
+
+#else
+
+static inline void sh_bios_vbr_init(void) { }
+static inline void sh_bios_vbr_reload(void) { }
+
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
 #endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/siu.h b/arch/sh/include/asm/siu.h
new file mode 100644
index 0000000..1d95c78
--- /dev/null
+++ b/arch/sh/include/asm/siu.h
@@ -0,0 +1,24 @@
+/*
+ * platform header for the SIU ASoC driver
+ *
+ * Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_SIU_H
+#define ASM_SIU_H
+
+struct device;
+
+struct siu_platform {
+	struct device *dma_dev;
+	unsigned int dma_slave_tx_a;
+	unsigned int dma_slave_rx_a;
+	unsigned int dma_slave_tx_b;
+	unsigned int dma_slave_rx_b;
+};
+
+#endif /* ASM_SIU_H */
diff --git a/arch/sh/include/asm/smp-ops.h b/arch/sh/include/asm/smp-ops.h
new file mode 100644
index 0000000..c590f76
--- /dev/null
+++ b/arch/sh/include/asm/smp-ops.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_SH_SMP_OPS_H
+#define __ASM_SH_SMP_OPS_H
+
+struct plat_smp_ops {
+	void (*smp_setup)(void);
+	unsigned int (*smp_processor_id)(void);
+	void (*prepare_cpus)(unsigned int max_cpus);
+	void (*start_cpu)(unsigned int cpu, unsigned long entry_point);
+	void (*send_ipi)(unsigned int cpu, unsigned int message);
+	int (*cpu_disable)(unsigned int cpu);
+	void (*cpu_die)(unsigned int cpu);
+	void (*play_dead)(void);
+};
+
+extern struct plat_smp_ops *mp_ops;
+extern struct plat_smp_ops shx3_smp_ops;
+
+#ifdef CONFIG_SMP
+
+static inline void plat_smp_setup(void)
+{
+	BUG_ON(!mp_ops);
+	mp_ops->smp_setup();
+}
+
+static inline void play_dead(void)
+{
+	mp_ops->play_dead();
+}
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+#else
+
+static inline void plat_smp_setup(void)
+{
+	/* UP, nothing to do ... */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+static inline void play_dead(void)
+{
+	BUG();
+}
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_OPS_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
index 53ef26c..9070d94 100644
--- a/arch/sh/include/asm/smp.h
+++ b/arch/sh/include/asm/smp.h
@@ -3,15 +3,16 @@
 
 #include <linux/bitops.h>
 #include <linux/cpumask.h>
+#include <asm/smp-ops.h>
 
 #ifdef CONFIG_SMP
 
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
 #include <asm/current.h>
+#include <asm/percpu.h>
 
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
-#define hard_smp_processor_id()	plat_smp_processor_id()
 
 /* Map from cpu id to sequential logical cpu number. */
 extern int __cpu_number_map[NR_CPUS];
@@ -30,20 +31,43 @@ enum {
 	SMP_MSG_NR,	/* must be last */
 };
 
+DECLARE_PER_CPU(int, cpu_state);
+
 void smp_message_recv(unsigned int msg);
 void smp_timer_broadcast(const struct cpumask *mask);
 
 void local_timer_interrupt(void);
 void local_timer_setup(unsigned int cpu);
-
-void plat_smp_setup(void);
-void plat_prepare_cpus(unsigned int max_cpus);
-int plat_smp_processor_id(void);
-void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
-void plat_send_ipi(unsigned int cpu, unsigned int message);
+void local_timer_stop(unsigned int cpu);
 
 void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+void native_play_dead(void);
+void native_cpu_die(unsigned int cpu);
+int native_cpu_disable(unsigned int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+void play_dead_common(void);
+extern int __cpu_disable(void);
+
+static inline void __cpu_die(unsigned int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->cpu_die(cpu);
+}
+#endif
+
+static inline int hard_smp_processor_id(void)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	if (!mp_ops)
+		return 0;	/* boot CPU */
+
+	return mp_ops->smp_processor_id();
+}
 
 #else
 
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index fe9c2a1..64eb41a 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -92,5 +92,6 @@ extern unsigned long sh_mobile_sleep_supported;
 #define SUSP_SH_USTANDBY	(1 << 3) /* SH-Mobile U-standby mode */
 #define SUSP_SH_SF		(1 << 4) /* Enable self-refresh */
 #define SUSP_SH_MMU		(1 << 5) /* Save/restore MMU and cache */
+#define SUSP_SH_REGS		(1 << 6) /* Save/restore registers */
 
 #endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h
index 6a38142..aa7777b 100644
--- a/arch/sh/include/asm/syscall.h
+++ b/arch/sh/include/asm/syscall.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_SH_SYSCALL_H
 #define __ASM_SH_SYSCALL_H
 
+extern const unsigned long sys_call_table[];
+
 #ifdef CONFIG_SUPERH32
 # include "syscall_32.h"
 #else
diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h
index c1e2b8d..507725a 100644
--- a/arch/sh/include/asm/syscalls.h
+++ b/arch/sh/include/asm/syscalls.h
@@ -3,17 +3,12 @@
 
 #ifdef __KERNEL__
 
-struct old_utsname;
-
 asmlinkage int old_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
 			int fd, unsigned long off);
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff);
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth);
-asmlinkage int sys_uname(struct old_utsname __user *name);
 
 #ifdef CONFIG_SUPERH32
 # include "syscalls_32.h"
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index c15415b..0bd7a17 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -10,7 +10,6 @@
 #include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <asm/types.h>
-#include <asm/ptrace.h>
 
 #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
 
@@ -32,7 +31,7 @@
 #define mb()		__asm__ __volatile__ ("synco": : :"memory")
 #define rmb()		mb()
 #define wmb()		__asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()	__icbi(0xa8000000)
+#define ctrl_barrier()	__icbi(PAGE_OFFSET)
 #define read_barrier_depends()	do { } while(0)
 #else
 #define mb()		__asm__ __volatile__ ("": : :"memory")
@@ -114,6 +113,8 @@ static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
 				    (unsigned long)_n_, sizeof(*(ptr))); \
   })
 
+struct pt_regs;
+
 extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
 void free_initmem(void);
 void free_initrd_mem(unsigned long start, unsigned long end);
@@ -137,14 +138,14 @@ extern unsigned int instruction_size(unsigned int insn);
 #endif
 
 extern unsigned long cached_to_uncached;
+extern unsigned long uncached_size;
 
 extern struct dentry *sh_debugfs_root;
 
 void per_cpu_trap_init(void);
 void default_idle(void);
 void cpu_idle_wait(void);
-
-asmlinkage void break_point_trap(void);
+void stop_this_cpu(void *);
 
 #ifdef CONFIG_SUPERH32
 #define BUILD_TRAP_HANDLER(name)					\
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 06814f5..51296b3 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -2,6 +2,7 @@
 #define __ASM_SH_SYSTEM_32_H
 
 #include <linux/types.h>
+#include <asm/mmu.h>
 
 #ifdef CONFIG_SH_DSP
 
@@ -144,9 +145,6 @@ do {								\
 		__restore_dsp(prev);				\
 } while (0)
 
-#define __uses_jump_to_uncached \
-	noinline __attribute__ ((__section__ (".uncached.text")))
-
 /*
  * Jump to uncached area.
  * When handling TLB or caches, we need to do it from an uncached area.
@@ -216,6 +214,17 @@ static inline reg_size_t register_align(void *val)
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma, int);
 
+static inline void trigger_address_error(void)
+{
+	if (__in_29bit_mode())
+		__asm__ __volatile__ (
+			"ldc %0, sr\n\t"
+			"mov.l @%1, %0"
+			:
+			: "r" (0x10000000), "r" (0x80000001)
+		);
+}
+
 asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long writeaccess,
 				 unsigned long address);
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index ab1dd91..3633864 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -18,6 +18,7 @@
 /*
  *	switch_to() should switch tasks to task nr n, first
  */
+struct thread_struct;
 struct task_struct *sh64_switch_to(struct task_struct *prev,
 				   struct thread_struct *prev_thread,
 				   struct task_struct *next,
@@ -33,8 +34,6 @@ do {								\
 			      &next->thread);			\
 } while (0)
 
-#define __uses_jump_to_uncached
-
 #define jump_to_uncached()	do { } while (0)
 #define back_to_cached()	do { } while (0)
 
@@ -48,6 +47,13 @@ static inline reg_size_t register_align(void *val)
 	return (unsigned long long)(signed long long)(signed long)val;
 }
 
+extern void phys_stext(void);
+
+static inline void trigger_address_error(void)
+{
+	phys_stext();
+}
+
 #define SR_BL_LL	0x0000000010000000LL
 
 static inline void set_bl_bit(void)
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index 1f3d927..c2289469 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -93,14 +93,16 @@ static inline struct thread_info *current_thread_info(void)
 
 #define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
 
-#else /* THREAD_SHIFT < PAGE_SHIFT */
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+#endif
 
 extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
 extern void free_thread_info(struct thread_info *ti);
+extern void arch_task_cache_init(void);
+#define arch_task_cache_init arch_task_cache_init
+extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
+extern void init_thread_xstate(void);
 
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
 
 #endif /* __ASSEMBLY__ */
 
@@ -119,7 +121,7 @@ extern void free_thread_info(struct thread_info *ti);
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
 #define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19	/* Freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index da8fe7a..75abb38 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -11,6 +11,7 @@
 #ifdef CONFIG_MMU
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /*
  * TLB handling.  This allows us to remove pages from the page
@@ -97,6 +98,22 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64)
+extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t);
+extern void tlb_unwire_entry(void);
+#else
+static inline void tlb_wire_entry(struct vm_area_struct *vma ,
+				  unsigned long addr, pte_t pte)
+{
+	BUG();
+}
+
+static inline void tlb_unwire_entry(void)
+{
+	BUG();
+}
+#endif
+
 #else /* CONFIG_MMU */
 
 #define tlb_start_vma(tlb, vma)				do { } while (0)
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index 37cdadd..88e7340 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -35,7 +35,7 @@
 
 #define pcibus_to_node(bus)	((void)(bus), -1)
 #define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL_PTR : \
+					cpu_all_mask : \
 					cpumask_of_node(pcibus_to_node(bus)))
 
 #endif
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
deleted file mode 100644
index 9bf9616..0000000
--- a/arch/sh/include/asm/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_UBC_H
-#define __ASM_SH_UBC_H
-#ifdef __KERNEL__
-
-#include <cpu/ubc.h>
-
-/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
-#else
-#define UBC_TYPE_SH7729	0
-#endif
-
-#define BAMR_ASID		(1 << 2)
-#define BAMR_NONE		0
-#define BAMR_10			0x1
-#define BAMR_12			0x2
-#define BAMR_ALL		0x3
-#define BAMR_16			0x8
-#define BAMR_20			0x9
-
-#define BBR_INST		(1 << 4)
-#define BBR_DATA		(2 << 4)
-#define BBR_READ		(1 << 2)
-#define BBR_WRITE		(2 << 2)
-#define BBR_BYTE		0x1
-#define BBR_HALF		0x2
-#define BBR_LONG		0x3
-#define BBR_QUAD		(1 << 6)	/* SH7750 */
-#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
-#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
-
-#define BRCR_CMFA		(1 << 15)
-#define BRCR_CMFB		(1 << 14)
-
-#if defined CONFIG_CPU_SH2A
-#define BRCR_CMFCA		(1 << 15)
-#define BRCR_CMFCB		(1 << 14)
-#define BRCR_CMFDA		(1 << 13)
-#define BRCR_CMFDB		(1 << 12)
-#define BRCR_PCBB		(1 << 6)	/* 1: after execution */
-#define BRCR_PCBA		(1 << 5)	/* 1: after execution */
-#define BRCR_PCTE		0
-#else
-#define BRCR_PCTE		(1 << 11)
-#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
-#define BRCR_DBEB		(1 << 7)
-#define BRCR_PCBB		(1 << 6)
-#define BRCR_SEQ		(1 << 3)
-#define BRCR_UBDE		(1 << 0)
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h
new file mode 100644
index 0000000..e3419f9
--- /dev/null
+++ b/arch/sh/include/asm/uncached.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_UNCACHED_H
+#define __ASM_SH_UNCACHED_H
+
+#include <linux/bug.h>
+
+#ifdef CONFIG_UNCACHED_MAPPING
+extern unsigned long uncached_start, uncached_end;
+
+extern int virt_addr_uncached(unsigned long kaddr);
+extern void uncached_init(void);
+extern void uncached_resize(unsigned long size);
+#else
+#define virt_addr_uncached(kaddr)	(0)
+#define uncached_init()			do { } while (0)
+#define uncached_resize(size)		BUG()
+#endif
+
+#endif /* __ASM_SH_UNCACHED_H */
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 365744b..0e7f0fc 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -358,6 +358,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -370,6 +371,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 25de158..0580c33 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -398,6 +398,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -410,6 +411,7 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
index 244ec4a..d58ad49 100644
--- a/arch/sh/include/asm/vmlinux.lds.h
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -14,4 +14,12 @@
 #define DWARF_EH_FRAME
 #endif
 
+#ifdef CONFIG_SUPERH64
+#define EXTRA_TEXT		\
+	*(.text64)		\
+	*(.text..SHmedia32)
+#else
+#define EXTRA_TEXT
+#endif
+
 #endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index 19dfff5..85a7aca 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -70,7 +70,7 @@
  */
 static inline __u32 sh_wdt_read_cnt(void)
 {
-	return ctrl_inl(WTCNT_R);
+	return __raw_readl(WTCNT_R);
 }
 
 /**
@@ -82,7 +82,7 @@ static inline __u32 sh_wdt_read_cnt(void)
  */
 static inline void sh_wdt_write_cnt(__u32 val)
 {
-	ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
+	__raw_writel((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
 }
 
 /**
@@ -94,7 +94,7 @@ static inline void sh_wdt_write_cnt(__u32 val)
  */
 static inline void sh_wdt_write_bst(__u32 val)
 {
-	ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST);
+	__raw_writel((WTBST_HIGH << 24) | (__u32)val, WTBST);
 }
 /**
  * 	sh_wdt_read_csr - Read from Control/Status Register
@@ -103,7 +103,7 @@ static inline void sh_wdt_write_bst(__u32 val)
  */
 static inline __u32 sh_wdt_read_csr(void)
 {
-	return ctrl_inl(WTCSR_R);
+	return __raw_readl(WTCSR_R);
 }
 
 /**
@@ -115,7 +115,7 @@ static inline __u32 sh_wdt_read_csr(void)
  */
 static inline void sh_wdt_write_csr(__u32 val)
 {
-	ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
+	__raw_writel((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
 }
 #else
 /**
@@ -124,7 +124,7 @@ static inline void sh_wdt_write_csr(__u32 val)
  */
 static inline __u8 sh_wdt_read_cnt(void)
 {
-	return ctrl_inb(WTCNT_R);
+	return __raw_readb(WTCNT_R);
 }
 
 /**
@@ -136,7 +136,7 @@ static inline __u8 sh_wdt_read_cnt(void)
  */
 static inline void sh_wdt_write_cnt(__u8 val)
 {
-	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+	__raw_writew((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
 }
 
 /**
@@ -146,7 +146,7 @@ static inline void sh_wdt_write_cnt(__u8 val)
  */
 static inline __u8 sh_wdt_read_csr(void)
 {
-	return ctrl_inb(WTCSR_R);
+	return __raw_readb(WTCSR_R);
 }
 
 /**
@@ -158,7 +158,7 @@ static inline __u8 sh_wdt_read_csr(void)
  */
 static inline void sh_wdt_write_csr(__u8 val)
 {
-	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+	__raw_writew((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
 }
 #endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
 #endif /* __KERNEL__ */
diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
deleted file mode 100644
index ba0e87f..0000000
--- a/arch/sh/include/cpu-sh2/cpu/ubc.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/ubc.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_UBC_H
-#define __ASM_CPU_SH2_UBC_H
-
-#define UBC_BARA                0xffffff40
-#define UBC_BAMRA               0xffffff44
-#define UBC_BBRA                0xffffff48
-#define UBC_BARB                0xffffff60
-#define UBC_BAMRB               0xffffff64
-#define UBC_BBRB                0xffffff68
-#define UBC_BDRB                0xffffff70
-#define UBC_BDMRB               0xffffff74
-#define UBC_BRCR                0xffffff78
-
-/*
- * We don't have any ASID changes to make in the UBC on the SH-2.
- *
- * Make these purposely invalid to track misuse.
- */
-#define UBC_BASRA		0x00000000
-#define UBC_BASRB		0x00000000
-
-#endif /* __ASM_CPU_SH2_UBC_H */
-
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
index 393161c..1eab8aa 100644
--- a/arch/sh/include/cpu-sh2/cpu/watchdog.h
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
@@ -44,7 +44,7 @@ static inline __u8 sh_wdt_read_rstcsr(void)
 	/*
 	 * Same read/write brain-damage as for WTCNT here..
 	 */
-	return ctrl_inb(RSTCSR_R);
+	return __raw_readb(RSTCSR_R);
 }
 
 /**
@@ -62,7 +62,7 @@ static inline void sh_wdt_write_rstcsr(__u8 val)
 	 * we can't presently touch the WOVF bit, since the upper byte
 	 * has to be swapped for this. So just leave it alone..
 	 */
-	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+	__raw_writeb((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
 }
 
 #endif /* __ASM_CPU_SH2_WATCHDOG_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
index 05fda83..98f1d15 100644
--- a/arch/sh/include/cpu-sh3/cpu/dac.h
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
@@ -17,25 +17,25 @@
 static __inline__ void sh_dac_enable(int channel)
 {
 	unsigned char v;
-	v = ctrl_inb(DACR);
+	v = __raw_readb(DACR);
 	if(channel) v |= DACR_DAOE1;
 	else v |= DACR_DAOE0;
-	ctrl_outb(v,DACR);
+	__raw_writeb(v,DACR);
 }
 
 static __inline__ void sh_dac_disable(int channel)
 {
 	unsigned char v;
-	v = ctrl_inb(DACR);
+	v = __raw_readb(DACR);
 	if(channel) v &= ~DACR_DAOE1;
 	else v &= ~DACR_DAOE0;
-	ctrl_outb(v,DACR);
+	__raw_writeb(v,DACR);
 }
 
 static __inline__ void sh_dac_output(u8 value, int channel)
 {
-	if(channel) ctrl_outb(value,DADR1);
-	else ctrl_outb(value,DADR0);
+	if(channel) __raw_writeb(value,DADR1);
+	else __raw_writeb(value,DADR0);
 }
 
 #endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma-register.h b/arch/sh/include/cpu-sh3/cpu/dma-register.h
new file mode 100644
index 0000000..2349e48
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/dma-register.h
@@ -0,0 +1,41 @@
+/*
+ * SH3 CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef CPU_DMA_REGISTER_H
+#define CPU_DMA_REGISTER_H
+
+#define CHCR_TS_LOW_MASK	0x18
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+
+#define DMAOR_INIT	DMAOR_DME
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+}
+
+#define TS_INDEX2VAL(i)	(((i) & 3) << CHCR_TS_LOW_SHIFT)
+
+#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
index 0ea15f3..24e28b9 100644
--- a/arch/sh/include/cpu-sh3/cpu/dma.h
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -20,27 +20,4 @@
 #define TS_32		0x00000010
 #define TS_128		0x00000018
 
-#define CHCR_TS_MASK	0x18
-#define CHCR_TS_SHIFT	3
-
-#define DMAOR_INIT	DMAOR_DME
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- */
-enum {
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_128BIT,
-};
-
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_128BIT]	= 4,
-};
-
 #endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
deleted file mode 100644
index 4e6381d..0000000
--- a/arch/sh/include/cpu-sh3/cpu/ubc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_UBC_H
-#define __ASM_CPU_SH3_UBC_H
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define UBC_BARA		0xa4ffffb0
-#define UBC_BAMRA		0xa4ffffb4
-#define UBC_BBRA		0xa4ffffb8
-#define UBC_BASRA		0xffffffe4
-#define UBC_BARB		0xa4ffffa0
-#define UBC_BAMRB		0xa4ffffa4
-#define UBC_BBRB		0xa4ffffa8
-#define UBC_BASRB		0xffffffe8
-#define UBC_BDRB		0xa4ffff90
-#define UBC_BDMRB		0xa4ffff94
-#define UBC_BRCR		0xa4ffff98
-#else
-#define UBC_BARA                0xffffffb0
-#define UBC_BAMRA               0xffffffb4
-#define UBC_BBRA                0xffffffb8
-#define UBC_BASRA               0xffffffe4
-#define UBC_BARB                0xffffffa0
-#define UBC_BAMRB               0xffffffa4
-#define UBC_BBRB                0xffffffa8
-#define UBC_BASRB               0xffffffe8
-#define UBC_BDRB                0xffffff90
-#define UBC_BDMRB               0xffffff94
-#define UBC_BRCR                0xffffff98
-#endif
-
-#endif /* __ASM_CPU_SH3_UBC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
index a3fa733..d51da25 100644
--- a/arch/sh/include/cpu-sh4/cpu/addrspace.h
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -28,6 +28,15 @@
 #define P4SEG_TLB_DATA	0xf7000000
 #define P4SEG_REG_BASE	0xff000000
 
+#define PA_AREA0	0x00000000
+#define PA_AREA1	0x04000000
+#define PA_AREA2	0x08000000
+#define PA_AREA3	0x0c000000
+#define PA_AREA4	0x10000000
+#define PA_AREA5	0x14000000
+#define PA_AREA6	0x18000000
+#define PA_AREA7	0x1c000000
+
 #define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
 #define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
 
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-register.h b/arch/sh/include/cpu-sh4/cpu/dma-register.h
new file mode 100644
index 0000000..9a6125e
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma-register.h
@@ -0,0 +1,113 @@
+/*
+ * SH4 CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef CPU_DMA_REGISTER_H
+#define CPU_DMA_REGISTER_H
+
+/* SH7751/7760/7780 DMA IRQ sources */
+
+#ifdef CONFIG_CPU_SH4A
+
+#define DMAOR_INIT	DMAOR_DME
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7730)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7724) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7786)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0x00300000
+#define CHCR_TS_HIGH_SHIFT	(20 - 2)	/* 2 bits for shifted low TS */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7764)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#else /* SH7785 */
+#define CHCR_TS_LOW_MASK	0x00000018
+#define CHCR_TS_LOW_SHIFT	3
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+#endif
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT		= 0,
+	XMIT_SZ_16BIT		= 1,
+	XMIT_SZ_32BIT		= 2,
+	XMIT_SZ_64BIT		= 7,
+	XMIT_SZ_128BIT		= 3,
+	XMIT_SZ_256BIT		= 4,
+	XMIT_SZ_128BIT_BLK	= 0xb,
+	XMIT_SZ_256BIT_BLK	= 0xc,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+	[XMIT_SZ_128BIT_BLK]	= 4,	\
+	[XMIT_SZ_256BIT_BLK]	= 5,	\
+}
+
+#define TS_INDEX2VAL(i)	((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
+			 (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
+
+#else /* CONFIG_CPU_SH4A */
+
+#define DMAOR_INIT	(0x8000 | DMAOR_DME)
+
+#define CHCR_TS_LOW_MASK	0x70
+#define CHCR_TS_LOW_SHIFT	4
+#define CHCR_TS_HIGH_MASK	0
+#define CHCR_TS_HIGH_SHIFT	0
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT	= 1,
+	XMIT_SZ_16BIT	= 2,
+	XMIT_SZ_32BIT	= 3,
+	XMIT_SZ_64BIT	= 0,
+	XMIT_SZ_256BIT	= 4,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+}
+
+#define TS_INDEX2VAL(i)	(((i) & 7) << CHCR_TS_LOW_SHIFT)
+
+#endif /* CONFIG_CPU_SH4A */
+
+#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
index c4ed660..9647e68 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -2,22 +2,26 @@
 #define __ASM_SH_CPU_SH4_DMA_SH7780_H
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
-	defined(CONFIG_CPU_SUBTYPE_SH7722) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7730)
 #define DMTE0_IRQ	48
 #define DMTE4_IRQ	76
 #define DMAE0_IRQ	78	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
-#define SH_DMARS_BASE	0xFE009000
+#define SH_DMARS_BASE0	0xFE009000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+#define DMTE0_IRQ	48
+#define DMTE4_IRQ	76
+#define DMAE0_IRQ	78	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMARS_BASE0	0xFE009000
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
 	defined(CONFIG_CPU_SUBTYPE_SH7764)
 #define DMTE0_IRQ	34
 #define DMTE4_IRQ	44
 #define DMAE0_IRQ	38
 #define SH_DMAC_BASE0	0xFF608020
-#define SH_DMARS_BASE	0xFF609000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SH_DMARS_BASE0	0xFF609000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
 #define DMTE0_IRQ	48	/* DMAC0A*/
 #define DMTE4_IRQ	76	/* DMAC0B */
 #define DMTE6_IRQ	40
@@ -29,7 +33,21 @@
 #define DMAE1_IRQ	74	/* DMA Error IRQ*/
 #define SH_DMAC_BASE0	0xFE008020
 #define SH_DMAC_BASE1	0xFDC08020
-#define SH_DMARS_BASE	0xFDC09000
+#define SH_DMARS_BASE0	0xFDC09000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define DMTE0_IRQ	48	/* DMAC0A*/
+#define DMTE4_IRQ	76	/* DMAC0B */
+#define DMTE6_IRQ	40
+#define DMTE8_IRQ	42	/* DMAC1A */
+#define DMTE9_IRQ	43
+#define DMTE10_IRQ	72	/* DMAC1B */
+#define DMTE11_IRQ	73
+#define DMAE0_IRQ	78	/* DMA Error IRQ*/
+#define DMAE1_IRQ	74	/* DMA Error IRQ*/
+#define SH_DMAC_BASE0	0xFE008020
+#define SH_DMAC_BASE1	0xFDC08020
+#define SH_DMARS_BASE0	0xFE009000
+#define SH_DMARS_BASE1	0xFDC09000
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define DMTE0_IRQ	34
 #define DMTE4_IRQ	44
@@ -41,7 +59,7 @@
 #define DMAE0_IRQ	38	/* DMA Error IRQ */
 #define SH_DMAC_BASE0	0xFC808020
 #define SH_DMAC_BASE1	0xFC818020
-#define SH_DMARS_BASE	0xFC809000
+#define SH_DMARS_BASE0	0xFC809000
 #else /* SH7785 */
 #define DMTE0_IRQ	33
 #define DMTE4_IRQ	37
@@ -54,42 +72,12 @@
 #define DMAE1_IRQ	58	/* DMA Error IRQ1 */
 #define SH_DMAC_BASE0	0xFC808020
 #define SH_DMAC_BASE1	0xFCC08020
-#define SH_DMARS_BASE	0xFC809000
+#define SH_DMARS_BASE0	0xFC809000
 #endif
 
-#define REQ_HE	0x000000C0
-#define REQ_H	0x00000080
-#define REQ_LE	0x00000040
-#define TM_BURST 0x0000020
-#define TS_8	0x00000000
-#define TS_16	0x00000008
-#define TS_32	0x00000010
-#define TS_16BLK	0x00000018
-#define TS_32BLK	0x00100000
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_128BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_128BIT]	= 4,
-	[XMIT_SZ_256BIT]	= 5,
-};
+#define REQ_HE		0x000000C0
+#define REQ_H		0x00000080
+#define REQ_LE		0x00000040
+#define TM_BURST	0x00000020
 
 #endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
index bcb3024..ca747e9 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -5,11 +5,8 @@
 
 #ifdef CONFIG_CPU_SH4A
 
-#define DMAOR_INIT	(DMAOR_DME)
-#define CHCR_TS_MASK	0x18
-#define CHCR_TS_SHIFT	3
-
 #include <cpu/dma-sh4a.h>
+
 #else /* CONFIG_CPU_SH4A */
 /*
  * SH7750/SH7751/SH7760
@@ -19,7 +16,6 @@
 #define DMTE6_IRQ	46
 #define DMAE0_IRQ	38
 
-#define DMAOR_INIT	(0x8000|DMAOR_DME)
 #define SH_DMAC_BASE0	0xffa00000
 #define SH_DMAC_BASE1	0xffa00070
 /* Definitions for the SuperH DMAC */
@@ -29,35 +25,8 @@
 #define TS_32		0x00000030
 #define TS_64		0x00000000
 
-#define CHCR_TS_MASK	0x70
-#define CHCR_TS_SHIFT	4
-
 #define DMAOR_COD	0x00000008
 
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
-	XMIT_SZ_64BIT,
-	XMIT_SZ_8BIT,
-	XMIT_SZ_16BIT,
-	XMIT_SZ_32BIT,
-	XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
-	[XMIT_SZ_64BIT]		= 3,
-	[XMIT_SZ_8BIT]		= 0,
-	[XMIT_SZ_16BIT]		= 1,
-	[XMIT_SZ_32BIT]		= 2,
-	[XMIT_SZ_256BIT]	= 5,
-};
 #endif
 
 #endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
index 3ce7ef6..e46ec70 100644
--- a/arch/sh/include/cpu-sh4/cpu/mmu_context.h
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -19,11 +19,32 @@
 
 #define MMUCR		0xFF000010	/* MMU Control Register */
 
+#define MMU_TLB_ENTRY_SHIFT	8
+
+#define MMU_ITLB_ADDRESS_ARRAY  0xF2000000
+#define MMU_ITLB_ADDRESS_ARRAY2	0xF2800000
+#define MMU_ITLB_DATA_ARRAY	0xF3000000
+#define MMU_ITLB_DATA_ARRAY2	0xF3800000
+
 #define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
 #define MMU_UTLB_ADDRESS_ARRAY2	0xF6800000
+#define MMU_UTLB_DATA_ARRAY	0xF7000000
+#define MMU_UTLB_DATA_ARRAY2	0xF7800000
 #define MMU_PAGE_ASSOC_BIT	0x80
 
-#define MMUCR_TI		(1<<2)
+#ifdef CONFIG_MMU
+#define MMUCR_AT		(1 << 0)
+#else
+#define MMUCR_AT		(0)
+#endif
+
+#define MMUCR_TI		(1 << 2)
+
+#define MMUCR_URB		0x00FC0000
+#define MMUCR_URB_SHIFT		18
+#define MMUCR_URB_NENTRIES	64
+#define MMUCR_URC		0x0000FC00
+#define MMUCR_URC_SHIFT		10
 
 #if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
 #define MMUCR_SE		(1 << 4)
@@ -50,7 +71,8 @@
 #endif
 
 #define MMU_NTLB_ENTRIES	64
-#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE|MMUCR_AEX)
+#define MMU_CONTROL_INIT	(MMUCR_AT | MMUCR_TI | MMUCR_SQMD | \
+				 MMUCR_ME | MMUCR_SE | MMUCR_AEX)
 
 #define TRA	0xff000020
 #define EXPEVT	0xff000024
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
index 4856040..7a5b8a3 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -235,4 +235,19 @@ enum {
 	HWBLK_NR,
 };
 
+enum {
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SIUA_TX,
+	SHDMA_SLAVE_SIUA_RX,
+	SHDMA_SLAVE_SIUB_TX,
+	SHDMA_SLAVE_SIUB_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI0_RX,
+};
+
 #endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 0cd1f71..4c27b68 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -9,6 +9,7 @@
  * MD3: BSC - Area0 Bus Width (16/32-bit) [CS0BCR.9,10]
  * MD5: BSC - Endian Mode (L: Big, H: Little) [CMNCR.3]
  * MD8: Test Mode
+ * BOOT: FBR - Boot Mode (L: MMCIF, H: Area0)
  */
 
 /* Pin Function Controller:
@@ -283,4 +284,23 @@ enum {
 	HWBLK_NR,
 };
 
+enum {
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_SCIF5_TX,
+	SHDMA_SLAVE_SCIF5_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI0_RX,
+	SHDMA_SLAVE_SDHI1_TX,
+	SHDMA_SLAVE_SDHI1_RX,
+};
+
 #endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
index 586d649..74716ba 100644
--- a/arch/sh/include/cpu-sh4/cpu/sq.h
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
@@ -12,6 +12,7 @@
 #define __ASM_CPU_SH4_SQ_H
 
 #include <asm/addrspace.h>
+#include <asm/page.h>
 
 /*
  * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
@@ -28,7 +29,7 @@
 
 /* arch/sh/kernel/cpu/sh4/sq.c */
 unsigned long sq_remap(unsigned long phys, unsigned int size,
-		       const char *name, unsigned long flags);
+		       const char *name, pgprot_t prot);
 void sq_unmap(unsigned long vaddr);
 void sq_flush_range(unsigned long start, unsigned int len);
 
diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
deleted file mode 100644
index c86e170..0000000
--- a/arch/sh/include/cpu-sh4/cpu/ubc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/ubc.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_UBC_H
-#define __ASM_CPU_SH4_UBC_H
-
-#if defined(CONFIG_CPU_SH4A)
-#define UBC_CBR0		0xff200000
-#define UBC_CRR0		0xff200004
-#define UBC_CAR0		0xff200008
-#define UBC_CAMR0		0xff20000c
-#define UBC_CBR1		0xff200020
-#define UBC_CRR1		0xff200024
-#define UBC_CAR1		0xff200028
-#define UBC_CAMR1		0xff20002c
-#define UBC_CDR1		0xff200030
-#define UBC_CDMR1		0xff200034
-#define UBC_CETR1		0xff200038
-#define UBC_CCMFR		0xff200600
-#define UBC_CBCR		0xff200620
-
-/* CBR	*/
-#define UBC_CBR_AIE		(0x01<<30)
-#define UBC_CBR_ID_INST		(0x01<<4)
-#define UBC_CBR_RW_READ		(0x01<<1)
-#define UBC_CBR_CE		(0x01)
-
-#define	UBC_CBR_AIV_MASK	(0x00FF0000)
-#define	UBC_CBR_AIV_SHIFT	(16)
-#define UBC_CBR_AIV_SET(asid)	(((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK)
-
-#define UBC_CBR_INIT		0x20000000
-
-/* CRR	*/
-#define UBC_CRR_RES		(0x01<<13)
-#define UBC_CRR_PCB		(0x01<<1)
-#define UBC_CRR_BIE		(0x01)
-
-#define UBC_CRR_INIT		0x00002000
-
-#else	/* CONFIG_CPU_SH4 */
-#define UBC_BARA		0xff200000
-#define UBC_BAMRA		0xff200004
-#define UBC_BBRA		0xff200008
-#define UBC_BASRA		0xff000014
-#define UBC_BARB		0xff20000c
-#define UBC_BAMRB		0xff200010
-#define UBC_BBRB		0xff200014
-#define UBC_BASRB		0xff000018
-#define UBC_BDRB		0xff200018
-#define UBC_BDMRB		0xff20001c
-#define UBC_BRCR		0xff200020
-#endif	/* CONFIG_CPU_SH4 */
-
-#endif /* __ASM_CPU_SH4_UBC_H */
-
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 7672301..7f62b93 100644
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -21,6 +21,12 @@
 #define WTCNT		0xffcc0000 /*WDTST*/
 #define WTST		WTCNT
 #define WTBST		0xffcc0008 /*WDTBST*/
+/* Register definitions */
+#elif	defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+	defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define WTCNT		0xa4520000
+#define WTCSR		0xa4520004
 #else
 /* Register definitions */
 #define WTCNT		0xffc00008
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
index c644a77..183a2f7 100644
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ b/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -19,12 +19,12 @@
 #include <asm/io_generic.h>
 
 
-#define SETBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) | mask, reg)
-#define SETBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) | mask, reg)
-#define SETBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) | mask, reg)
-#define CLRBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) & ~mask, reg)
-#define CLRBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) & ~mask, reg)
-#define CLRBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+#define SETBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) & ~mask, reg)
 
 
 #define PA_LED          PORT_PADR      /* LED */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 267e241..08fb422 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -1 +1,11 @@
+#ifdef __ASSEMBLY__
+
 /* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
index f334266..58f710e 100644
--- a/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -39,5 +39,10 @@
 
 #define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
 
+/* arch/sh/boards/mach-dreamcast/irq.c */
+extern int systemasic_irq_demux(int);
+extern void systemasic_irq_init(void);
+extern void aica_time_init(void);
+
 #endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
 
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1c8787e..1dcf5e6 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* EcoVec board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,28 @@
 	.align 2
 1 :	.long 0xa8000000
 2 :
+
+#else /* __ASSEMBLY__ */
+
+/* Ecovec board specific information:
+ *
+ * Set the following to enable MMCIF boot from the MMC card in CN12:
+ *
+ * DS1.5 = OFF (SH BOOT pin set to L)
+ * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1)
+ * DS2.7 = ON  (Select MMCIF on CN12 instead of SDHI1)
+ *
+ */
+#define HIZCRA		0xa4050158
+#define PGDR		0xa405012c
+
+extern inline void mmcif_update_progress(int nr)
+{
+	/* disable Hi-Z for LED pins */
+	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
+
+	/* update progress on LED4, LED5, LED6 and LED7 */
+	__raw_writeb(1 << (nr - 1), PGDR);
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index a110823..976256a 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -1,3 +1,5 @@
+#ifdef __ASSEMBLY__
+
 /* kfr2r09 board specific boot code:
  * converts the "partner-jet-script.txt" script into assembly
  * the assembly code is the first code to be executed in the romImage
@@ -18,3 +20,11 @@
 	.align 2
 1:	.long 0xa8000000
 2:
+
+#else /* __ASSEMBLY__ */
+
+extern inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
index cee6cb8..42fccf9 100644
--- a/arch/sh/include/mach-migor/mach/migor.h
+++ b/arch/sh/include/mach-migor/mach/migor.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_SH_MIGOR_H
 #define __ASM_SH_MIGOR_H
 
+#define PORT_MSELCRA 0xa4050180
 #define PORT_MSELCRB 0xa4050182
 #define BSC_CS4BCR 0xfec10010
 #define BSC_CS6ABCR 0xfec1001c
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
new file mode 100644
index 0000000..416b621
--- /dev/null
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -0,0 +1,123 @@
+#ifndef __MACH_SDK7786_FPGA_H
+#define __MACH_SDK7786_FPGA_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+
+#define SRSTR		0x000
+#define  SRSTR_MAGIC	0x1971	/* Fixed magical read value */
+
+#define INTASR		0x010
+#define INTAMR		0x020
+#define MODSWR		0x030
+#define INTTESTR	0x040
+#define SYSSR		0x050
+#define NRGPR		0x060
+#define NMISR		0x070
+
+#define NMIMR		0x080
+#define  NMIMR_MAN_NMIM	BIT(0)	/* Manual NMI mask */
+#define  NMIMR_AUX_NMIM	BIT(1)	/* Auxiliary NMI mask */
+
+#define INTBSR		0x090
+#define INTBMR		0x0a0
+#define USRLEDR		0x0b0
+#define MAPSWR		0x0c0
+#define FPGAVR		0x0d0
+#define FPGADR		0x0e0
+#define PCBRR		0x0f0
+#define RSR		0x100
+#define EXTASR		0x110
+#define SPCAR		0x120
+#define INTMSR		0x130
+#define PCIECR		0x140
+#define FAER		0x150
+#define USRGPIR		0x160
+/* 0x170 reserved */
+#define LCLASR		0x180
+
+#define SBCR		0x190
+#define  SCBR_I2CMEN	BIT(0)	/* FPGA I2C master enable */
+#define  SCBR_I2CCEN	BIT(1)	/* CPU I2C master enable */
+
+#define PWRCR		0x1a0
+#define  PWRCR_SCISEL0	BIT(0)
+#define  PWRCR_SCISEL1	BIT(1)
+#define  PWRCR_SCIEN	BIT(2)	/* Serial port enable */
+#define  PWRCR_PDWNACK	BIT(5)	/* Power down acknowledge */
+#define  PWRCR_PDWNREQ	BIT(7)	/* Power down request */
+#define  PWRCR_INT2	BIT(11)	/* INT2 connection to power manager */
+#define  PWRCR_BUPINIT	BIT(13)	/* DDR backup initialize */
+#define  PWRCR_BKPRST	BIT(15) /* Backup power reset */
+
+#define SPCBR		0x1b0
+#define SPICR		0x1c0
+#define SPIDR		0x1d0
+#define I2CCR		0x1e0
+#define I2CDR		0x1f0
+#define FPGACR		0x200
+#define IASELR1		0x210
+#define IASELR2		0x220
+#define IASELR3		0x230
+#define IASELR4		0x240
+#define IASELR5		0x250
+#define IASELR6		0x260
+#define IASELR7		0x270
+#define IASELR8		0x280
+#define IASELR9		0x290
+#define IASELR10	0x2a0
+#define IASELR11	0x2b0
+#define IASELR12	0x2c0
+#define IASELR13	0x2d0
+#define IASELR14	0x2e0
+#define IASELR15	0x2f0
+/* 0x300 reserved */
+#define IBSELR1		0x310
+#define IBSELR2		0x320
+#define IBSELR3		0x330
+#define IBSELR4		0x340
+#define IBSELR5		0x350
+#define IBSELR6		0x360
+#define IBSELR7		0x370
+#define IBSELR8		0x380
+#define IBSELR9		0x390
+#define IBSELR10	0x3a0
+#define IBSELR11	0x3b0
+#define IBSELR12	0x3c0
+#define IBSELR13	0x3d0
+#define IBSELR14	0x3e0
+#define IBSELR15	0x3f0
+#define USRACR		0x400
+#define BEEPR		0x410
+#define USRLCDR		0x420
+#define SMBCR		0x430
+#define SMBDR		0x440
+#define USBCR		0x450
+#define AMSR		0x460
+#define ACCR		0x470
+#define SDIFCR		0x480
+
+/* arch/sh/boards/mach-sdk7786/fpga.c */
+extern void __iomem *sdk7786_fpga_base;
+extern void sdk7786_fpga_init(void);
+
+#define SDK7786_FPGA_REGADDR(reg)	(sdk7786_fpga_base + (reg))
+
+/*
+ * A convenience wrapper from register offset to internal I2C address,
+ * when the FPGA is in I2C slave mode.
+ */
+#define SDK7786_FPGA_I2CADDR(reg)	((reg) >> 3)
+
+static inline u16 fpga_read_reg(unsigned int reg)
+{
+	return ioread16(sdk7786_fpga_base + reg);
+}
+
+static inline void fpga_write_reg(u16 val, unsigned int reg)
+{
+	iowrite16(val, sdk7786_fpga_base + reg);
+}
+
+#endif /* __MACH_SDK7786_FPGA_H */
diff --git a/arch/sh/include/mach-sdk7786/mach/irq.h b/arch/sh/include/mach-sdk7786/mach/irq.h
new file mode 100644
index 0000000..0f58463
--- /dev/null
+++ b/arch/sh/include/mach-sdk7786/mach/irq.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_SDK7786_IRQ_H
+#define __MACH_SDK7786_IRQ_H
+
+/* arch/sh/boards/mach-sdk7786/irq.c */
+extern void sdk7786_init_irq(void);
+
+#endif /* __MACH_SDK7786_IRQ_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
index 749914b..8d8170d 100644
--- a/arch/sh/include/mach-se/mach/se7343.h
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -94,26 +94,26 @@
 
 #define PORT_DRVCR	0xA4050180
 
-#define PORT_PADR  	0xA4050120
-#define PORT_PBDR  	0xA4050122
-#define PORT_PCDR  	0xA4050124
-#define PORT_PDDR  	0xA4050126
-#define PORT_PEDR  	0xA4050128
-#define PORT_PFDR  	0xA405012A
-#define PORT_PGDR  	0xA405012C
-#define PORT_PHDR  	0xA405012E
-#define PORT_PJDR  	0xA4050130
-#define PORT_PKDR  	0xA4050132
-#define PORT_PLDR  	0xA4050134
-#define PORT_PMDR  	0xA4050136
-#define PORT_PNDR  	0xA4050138
-#define PORT_PQDR  	0xA405013A
-#define PORT_PRDR  	0xA405013C
-#define PORT_PTDR  	0xA4050160
-#define PORT_PUDR  	0xA4050162
-#define PORT_PVDR  	0xA4050164
-#define PORT_PWDR  	0xA4050166
-#define PORT_PYDR  	0xA4050168
+#define PORT_PADR	0xA4050120
+#define PORT_PBDR	0xA4050122
+#define PORT_PCDR	0xA4050124
+#define PORT_PDDR	0xA4050126
+#define PORT_PEDR	0xA4050128
+#define PORT_PFDR	0xA405012A
+#define PORT_PGDR	0xA405012C
+#define PORT_PHDR	0xA405012E
+#define PORT_PJDR	0xA4050130
+#define PORT_PKDR	0xA4050132
+#define PORT_PLDR	0xA4050134
+#define PORT_PMDR	0xA4050136
+#define PORT_PNDR	0xA4050138
+#define PORT_PQDR	0xA405013A
+#define PORT_PRDR	0xA405013C
+#define PORT_PTDR	0xA4050160
+#define PORT_PUDR	0xA4050162
+#define PORT_PVDR	0xA4050164
+#define PORT_PWDR	0xA4050166
+#define PORT_PYDR	0xA4050168
 
 #define FPGA_IN		0xb1400000
 #define FPGA_OUT	0xb1400002
@@ -133,18 +133,10 @@
 #define SE7343_FPGA_IRQ_UARTB	11
 
 #define SE7343_FPGA_IRQ_NR	12
-#define SE7343_FPGA_IRQ_BASE	120
-
-#define MRSHPC_IRQ3    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
-#define USB_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
-#define UARTA_IRQ	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTA)
-#define UARTB_IRQ	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTB)
 
 /* arch/sh/boards/se/7343/irq.c */
+extern unsigned int se7343_fpga_irq[];
+
 void init_7343se_IRQ(void);
 
 #endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 0d587da..e25f3c6 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -11,10 +11,11 @@ endif
 
 CFLAGS_REMOVE_return_address.o = -pg
 
-obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 			\
-	   idle.o io.o io_generic.o irq.o				\
-	   irq_$(BITS).o machvec.o nmi_debug.o process_$(BITS).o 	\
-	   ptrace_$(BITS).o return_address.o				\
+obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
+	   idle.o io.o irq.o						\
+	   irq_$(BITS).o machvec.o nmi_debug.o process.o		\
+	   process_$(BITS).o ptrace_$(BITS).o				\
+	   reboot.o return_address.o					\
 	   setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o		\
 	   syscalls_$(BITS).o time.o topology.o traps.o			\
 	   traps_$(BITS).o unwinder.o
@@ -22,7 +23,7 @@ obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 			\
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o early_printk.o
+obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
@@ -38,7 +39,9 @@ obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
+obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
new file mode 100644
index 0000000..defdd6e
--- /dev/null
+++ b/arch/sh/kernel/clkdev.c
@@ -0,0 +1,169 @@
+/*
+ * arch/sh/kernel/clkdev.c
+ *
+ * Cloned from arch/arm/common/clkdev.c:
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <asm/clock.h>
+#include <asm/clkdev.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ *  An entry with a NULL ID is assumed to be a wildcard.
+ *  If an entry has a device ID, it must match
+ *  If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
+static struct clk *clk_find(const char *dev_id, const char *con_id)
+{
+	struct clk_lookup *p;
+	struct clk *clk = NULL;
+	int match, best = 0;
+
+	list_for_each_entry(p, &clocks, node) {
+		match = 0;
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+			match += 2;
+		}
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+			match += 1;
+		}
+		if (match == 0)
+			continue;
+
+		if (match > best) {
+			clk = p->clk;
+			best = match;
+		}
+	}
+	return clk;
+}
+
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+	struct clk *clk;
+
+	mutex_lock(&clocks_mutex);
+	clk = clk_find(dev_id, con_id);
+	mutex_unlock(&clocks_mutex);
+
+	return clk ? clk : ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get_sys);
+
+void clkdev_add(struct clk_lookup *cl)
+{
+	mutex_lock(&clocks_mutex);
+	list_add_tail(&cl->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clkdev_add);
+
+void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
+{
+	mutex_lock(&clocks_mutex);
+	while (num--) {
+		list_add_tail(&cl->node, &clocks);
+		cl++;
+	}
+	mutex_unlock(&clocks_mutex);
+}
+
+#define MAX_DEV_ID	20
+#define MAX_CON_ID	16
+
+struct clk_lookup_alloc {
+	struct clk_lookup cl;
+	char	dev_id[MAX_DEV_ID];
+	char	con_id[MAX_CON_ID];
+};
+
+struct clk_lookup * __init_refok
+clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
+{
+	struct clk_lookup_alloc *cla;
+
+	if (!slab_is_available())
+		cla = alloc_bootmem_low_pages(sizeof(*cla));
+	else
+		cla = kzalloc(sizeof(*cla), GFP_KERNEL);
+
+	if (!cla)
+		return NULL;
+
+	cla->cl.clk = clk;
+	if (con_id) {
+		strlcpy(cla->con_id, con_id, sizeof(cla->con_id));
+		cla->cl.con_id = cla->con_id;
+	}
+
+	if (dev_fmt) {
+		va_list ap;
+
+		va_start(ap, dev_fmt);
+		vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
+		cla->cl.dev_id = cla->dev_id;
+		va_end(ap);
+	}
+
+	return &cla->cl;
+}
+EXPORT_SYMBOL(clkdev_alloc);
+
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_get(dev, id);
+	struct clk_lookup *l;
+
+	if (IS_ERR(r))
+		return PTR_ERR(r);
+
+	l = clkdev_alloc(r, alias, alias_dev_name);
+	clk_put(r);
+	if (!l)
+		return -ENODEV;
+	clkdev_add(l);
+	return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
+/*
+ * clkdev_drop - remove a clock dynamically allocated
+ */
+void clkdev_drop(struct clk_lookup *cl)
+{
+	mutex_lock(&clocks_mutex);
+	list_del(&cl->node);
+	mutex_unlock(&clocks_mutex);
+	kfree(cl);
+}
+EXPORT_SYMBOL(clkdev_drop);
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index d97c803..4edcb60 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
 # Common interfaces.
 
 obj-$(CONFIG_SH_ADC)		+= adc.o
-obj-$(CONFIG_SH_CLK_CPG)	+= clock-cpg.o
+obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
+obj-$(CONFIG_SH_FPU)		+= fpu.o
+obj-$(CONFIG_SH_FPU_EMU)	+= fpu.o
 
 obj-y	+= irq/ init.o clock.o hwblk.o
diff --git a/arch/sh/kernel/cpu/adc.c b/arch/sh/kernel/cpu/adc.c
index da3d687..d307571 100644
--- a/arch/sh/kernel/cpu/adc.c
+++ b/arch/sh/kernel/cpu/adc.c
@@ -18,19 +18,19 @@ int adc_single(unsigned int channel)
 
 	off = (channel & 0x03) << 2;
 
-	csr = ctrl_inb(ADCSR);
+	csr = __raw_readb(ADCSR);
 	csr = channel | ADCSR_ADST | ADCSR_CKS;
-	ctrl_outb(csr, ADCSR);
+	__raw_writeb(csr, ADCSR);
 
 	do {
-		csr = ctrl_inb(ADCSR);
+		csr = __raw_readb(ADCSR);
 	} while ((csr & ADCSR_ADF) == 0);
 
 	csr &= ~(ADCSR_ADF | ADCSR_ADST);
-	ctrl_outb(csr, ADCSR);
+	__raw_writeb(csr, ADCSR);
 
-	return (((ctrl_inb(ADDRAH + off) << 8) |
-		ctrl_inb(ADDRAL + off)) >> 6);
+	return (((__raw_readb(ADDRAH + off) << 8) |
+		__raw_readb(ADDRAL + off)) >> 6);
 }
 
 EXPORT_SYMBOL(adc_single);
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index 6dfe2cc..e2f63d6 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -2,223 +2,25 @@
 #include <linux/compiler.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 
-static int sh_clk_mstp32_enable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit),
-		     clk->enable_reg);
-	return 0;
-}
-
-static void sh_clk_mstp32_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(clk->enable_reg) | (1 << clk->enable_bit),
-		     clk->enable_reg);
-}
-
-static struct clk_ops sh_clk_mstp32_clk_ops = {
-	.enable		= sh_clk_mstp32_enable,
-	.disable	= sh_clk_mstp32_disable,
-	.recalc		= followparent_recalc,
-};
-
-int __init sh_clk_mstp32_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	int ret = 0;
-	int k;
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-		clkp->ops = &sh_clk_mstp32_clk_ops;
-		ret |= clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static long sh_clk_div_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static int sh_clk_div6_divisors[64] = {
-	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
-	17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
-	33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
-	49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64
-};
-
-static struct clk_div_mult_table sh_clk_div6_table = {
-	.divisors = sh_clk_div6_divisors,
-	.nr_divisors = ARRAY_SIZE(sh_clk_div6_divisors),
-};
-
-static unsigned long sh_clk_div6_recalc(struct clk *clk)
-{
-	struct clk_div_mult_table *table = &sh_clk_div6_table;
-	unsigned int idx;
-
-	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
-			     table, NULL);
-
-	idx = __raw_readl(clk->enable_reg) & 0x003f;
-
-	return clk->freq_table[idx].frequency;
-}
-
-static int sh_clk_div6_set_rate(struct clk *clk,
-				unsigned long rate, int algo_id)
-{
-	unsigned long value;
-	int idx;
-
-	idx = clk_rate_table_find(clk, clk->freq_table, rate);
-	if (idx < 0)
-		return idx;
-
-	value = __raw_readl(clk->enable_reg);
-	value &= ~0x3f;
-	value |= idx;
-	__raw_writel(value, clk->enable_reg);
-	return 0;
-}
-
-static int sh_clk_div6_enable(struct clk *clk)
-{
-	unsigned long value;
-	int ret;
-
-	ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
-	if (ret == 0) {
-		value = __raw_readl(clk->enable_reg);
-		value &= ~0x100; /* clear stop bit to enable clock */
-		__raw_writel(value, clk->enable_reg);
-	}
-	return ret;
-}
-
-static void sh_clk_div6_disable(struct clk *clk)
-{
-	unsigned long value;
-
-	value = __raw_readl(clk->enable_reg);
-	value |= 0x100; /* stop clock */
-	value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
-	__raw_writel(value, clk->enable_reg);
-}
-
-static struct clk_ops sh_clk_div6_clk_ops = {
-	.recalc		= sh_clk_div6_recalc,
-	.round_rate	= sh_clk_div_round_rate,
-	.set_rate	= sh_clk_div6_set_rate,
-	.enable		= sh_clk_div6_enable,
-	.disable	= sh_clk_div6_disable,
-};
-
-int __init sh_clk_div6_register(struct clk *clks, int nr)
-{
-	struct clk *clkp;
-	void *freq_table;
-	int nr_divs = sh_clk_div6_table.nr_divisors;
-	int freq_table_size = sizeof(struct cpufreq_frequency_table);
-	int ret = 0;
-	int k;
-
-	freq_table_size *= (nr_divs + 1);
-	freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
-	if (!freq_table) {
-		pr_err("sh_clk_div6_register: unable to alloc memory\n");
-		return -ENOMEM;
-	}
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-
-		clkp->ops = &sh_clk_div6_clk_ops;
-		clkp->id = -1;
-		clkp->freq_table = freq_table + (k * freq_table_size);
-		clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
-		ret = clk_register(clkp);
-	}
-
-	return ret;
-}
-
-static unsigned long sh_clk_div4_recalc(struct clk *clk)
-{
-	struct clk_div_mult_table *table = clk->priv;
-	unsigned int idx;
-
-	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
-			     table, &clk->arch_flags);
-
-	idx = (__raw_readl(clk->enable_reg) >> clk->enable_bit) & 0x000f;
-
-	return clk->freq_table[idx].frequency;
-}
-
-static struct clk_ops sh_clk_div4_clk_ops = {
-	.recalc		= sh_clk_div4_recalc,
-	.round_rate	= sh_clk_div_round_rate,
-};
-
-int __init sh_clk_div4_register(struct clk *clks, int nr,
-				struct clk_div_mult_table *table)
-{
-	struct clk *clkp;
-	void *freq_table;
-	int nr_divs = table->nr_divisors;
-	int freq_table_size = sizeof(struct cpufreq_frequency_table);
-	int ret = 0;
-	int k;
-
-	freq_table_size *= (nr_divs + 1);
-	freq_table = kzalloc(freq_table_size * nr, GFP_KERNEL);
-	if (!freq_table) {
-		pr_err("sh_clk_div4_register: unable to alloc memory\n");
-		return -ENOMEM;
-	}
-
-	for (k = 0; !ret && (k < nr); k++) {
-		clkp = clks + k;
-
-		clkp->ops = &sh_clk_div4_clk_ops;
-		clkp->id = -1;
-		clkp->priv = table;
-
-		clkp->freq_table = freq_table + (k * freq_table_size);
-		clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
-
-		ret = clk_register(clkp);
-	}
-
-	return ret;
-}
-
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
 static struct clk master_clk = {
-	.name		= "master_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.rate		= CONFIG_SH_PCLK_FREQ,
 };
 
 static struct clk peripheral_clk = {
-	.name		= "peripheral_clk",
 	.parent		= &master_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
 
 static struct clk bus_clk = {
-	.name		= "bus_clk",
 	.parent		= &master_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
 
 static struct clk cpu_clk = {
-	.name		= "cpu_clk",
 	.parent		= &master_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -233,6 +35,16 @@ static struct clk *onchip_clocks[] = {
 	&cpu_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("master_clk", &master_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral_clk),
+	CLKDEV_CON_ID("bus_clk", &bus_clk),
+	CLKDEV_CON_ID("cpu_clk", &cpu_clk),
+};
+
 int __init __deprecated cpg_clk_init(void)
 {
 	int i, ret = 0;
@@ -244,6 +56,13 @@ int __init __deprecated cpg_clk_init(void)
 			ret |= clk_register(clk);
 	}
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	clk_add_alias("tmu_fck", NULL, "peripheral_clk", NULL);
+	clk_add_alias("mtu2_fck", NULL, "peripheral_clk", NULL);
+	clk_add_alias("cmt_fck", NULL, "peripheral_clk", NULL);
+	clk_add_alias("sci_ick", NULL, "peripheral_clk", NULL);
+
 	return ret;
 }
 
@@ -255,4 +74,3 @@ int __init __weak arch_clk_init(void)
 {
 	return cpg_clk_init();
 }
-#endif /* CONFIG_SH_CPG_CLK_LEGACY */
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index f3a46be..50f887d 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -10,558 +10,16 @@
  *
  *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
  *
- *  With clkdev bits:
- *
- *	Copyright (C) 2008 Russell King.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/kobject.h>
-#include <linux/sysdev.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/cpufreq.h>
+#include <linux/clk.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-void clk_rate_table_build(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  int nr_freqs,
-			  struct clk_div_mult_table *src_table,
-			  unsigned long *bitmap)
-{
-	unsigned long mult, div;
-	unsigned long freq;
-	int i;
-
-	for (i = 0; i < nr_freqs; i++) {
-		div = 1;
-		mult = 1;
-
-		if (src_table->divisors && i < src_table->nr_divisors)
-			div = src_table->divisors[i];
-
-		if (src_table->multipliers && i < src_table->nr_multipliers)
-			mult = src_table->multipliers[i];
-
-		if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
-			freq = CPUFREQ_ENTRY_INVALID;
-		else
-			freq = clk->parent->rate * mult / div;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = freq;
-	}
-
-	/* Termination entry */
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-}
-
-long clk_rate_table_round(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  unsigned long rate)
-{
-	unsigned long rate_error, rate_error_prev = ~0UL;
-	unsigned long rate_best_fit = rate;
-	unsigned long highest, lowest;
-	int i;
-
-	highest = lowest = 0;
-
-	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		unsigned long freq = freq_table[i].frequency;
-
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		if (freq > highest)
-			highest = freq;
-		if (freq < lowest)
-			lowest = freq;
-
-		rate_error = abs(freq - rate);
-		if (rate_error < rate_error_prev) {
-			rate_best_fit = freq;
-			rate_error_prev = rate_error;
-		}
-
-		if (rate_error == 0)
-			break;
-	}
-
-	if (rate >= highest)
-		rate_best_fit = highest;
-	if (rate <= lowest)
-		rate_best_fit = lowest;
-
-	return rate_best_fit;
-}
-
-int clk_rate_table_find(struct clk *clk,
-			struct cpufreq_frequency_table *freq_table,
-			unsigned long rate)
-{
-	int i;
-
-	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		unsigned long freq = freq_table[i].frequency;
-
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		if (freq == rate)
-			return i;
-	}
-
-	return -ENOENT;
-}
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
-	return clk->parent ? clk->parent->rate : 0;
-}
-
-int clk_reparent(struct clk *child, struct clk *parent)
-{
-	list_del_init(&child->sibling);
-	if (parent)
-		list_add(&child->sibling, &parent->children);
-	child->parent = parent;
-
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
-
-	return 0;
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &tclk->children, sibling) {
-		if (clkp->ops && clkp->ops->recalc)
-			clkp->rate = clkp->ops->recalc(clkp);
-
-		propagate_rate(clkp);
-	}
-}
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk->usecount == 0) {
-		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
-		       clk->name);
-		WARN_ON(1);
-		return;
-	}
-
-	if (!(--clk->usecount)) {
-		if (likely(clk->ops && clk->ops->disable))
-			clk->ops->disable(clk);
-		if (likely(clk->parent))
-			__clk_disable(clk->parent);
-	}
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	spin_lock_irqsave(&clock_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clock_lock, flags);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-static int __clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount++ == 0) {
-		if (clk->parent) {
-			ret = __clk_enable(clk->parent);
-			if (unlikely(ret))
-				goto err;
-		}
-
-		if (clk->ops && clk->ops->enable) {
-			ret = clk->ops->enable(clk);
-			if (ret) {
-				if (clk->parent)
-					__clk_disable(clk->parent);
-				goto err;
-			}
-		}
-	}
-
-	return ret;
-err:
-	clk->usecount--;
-	return ret;
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret;
-
-	if (!clk)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clock_lock, flags);
-	ret = __clk_enable(clk);
-	spin_unlock_irqrestore(&clock_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &root_clks, sibling) {
-		if (clkp->ops && clkp->ops->recalc)
-			clkp->rate = clkp->ops->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	/*
-	 * trap out already registered clocks
-	 */
-	if (clk->node.next || clk->node.prev)
-		return 0;
-
-	mutex_lock(&clock_list_sem);
-
-	INIT_LIST_HEAD(&clk->children);
-	clk->usecount = 0;
-
-	if (clk->parent)
-		list_add(&clk->sibling, &clk->parent->children);
-	else
-		list_add(&clk->sibling, &root_clks);
-
-	list_add(&clk->node, &clock_list);
-	if (clk->ops && clk->ops->init)
-		clk->ops->init(clk);
-	mutex_unlock(&clock_list_sem);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clock_list_sem);
-	list_del(&clk->sibling);
-	list_del(&clk->node);
-	mutex_unlock(&clock_list_sem);
-}
-EXPORT_SYMBOL_GPL(clk_unregister);
-
-static void clk_enable_init_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clock_list, node)
-		if (clkp->flags & CLK_ENABLE_ON_INIT)
-			clk_enable(clkp);
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
-{
-	int ret = -EOPNOTSUPP;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_lock, flags);
-
-	if (likely(clk->ops && clk->ops->set_rate)) {
-		ret = clk->ops->set_rate(clk, rate, algo_id);
-		if (ret != 0)
-			goto out_unlock;
-	} else {
-		clk->rate = rate;
-		ret = 0;
-	}
-
-	if (clk->ops && clk->ops->recalc)
-		clk->rate = clk->ops->recalc(clk);
-
-	propagate_rate(clk);
-
-out_unlock:
-	spin_unlock_irqrestore(&clock_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!parent || !clk)
-		return ret;
-	if (clk->parent == parent)
-		return 0;
-
-	spin_lock_irqsave(&clock_lock, flags);
-	if (clk->usecount == 0) {
-		if (clk->ops->set_parent)
-			ret = clk->ops->set_parent(clk, parent);
-		else
-			ret = clk_reparent(clk, parent);
-
-		if (ret == 0) {
-			pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
-				 clk->name, clk->parent->name, clk->rate);
-			if (clk->ops->recalc)
-				clk->rate = clk->ops->recalc(clk);
-			propagate_rate(clk);
-		}
-	} else
-		ret = -EBUSY;
-	spin_unlock_irqrestore(&clock_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (likely(clk->ops && clk->ops->round_rate)) {
-		unsigned long flags, rounded;
-
-		spin_lock_irqsave(&clock_lock, flags);
-		rounded = clk->ops->round_rate(clk, rate);
-		spin_unlock_irqrestore(&clock_lock, flags);
-
-		return rounded;
-	}
-
-	return clk_get_rate(clk);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/*
- * Find the correct struct clk for the device and connection ID.
- * We do slightly fuzzy matching here:
- *  An entry with a NULL ID is assumed to be a wildcard.
- *  If an entry has a device ID, it must match
- *  If an entry has a connection ID, it must match
- * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
- */
-static struct clk *clk_find(const char *dev_id, const char *con_id)
-{
-	struct clk_lookup *p;
-	struct clk *clk = NULL;
-	int match, best = 0;
-
-	list_for_each_entry(p, &clock_list, node) {
-		match = 0;
-		if (p->dev_id) {
-			if (!dev_id || strcmp(p->dev_id, dev_id))
-				continue;
-			match += 2;
-		}
-		if (p->con_id) {
-			if (!con_id || strcmp(p->con_id, con_id))
-				continue;
-			match += 1;
-		}
-		if (match == 0)
-			continue;
-
-		if (match > best) {
-			clk = p->clk;
-			best = match;
-		}
-	}
-	return clk;
-}
-
-struct clk *clk_get_sys(const char *dev_id, const char *con_id)
-{
-	struct clk *clk;
-
-	mutex_lock(&clock_list_sem);
-	clk = clk_find(dev_id, con_id);
-	mutex_unlock(&clock_list_sem);
-
-	return clk ? clk : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL_GPL(clk_get_sys);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	const char *dev_id = dev ? dev_name(dev) : NULL;
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	clk = clk_get_sys(dev_id, id);
-	if (clk && !IS_ERR(clk))
-		return clk;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clock_list_sem);
-	list_for_each_entry(p, &clock_list, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	list_for_each_entry(p, &clock_list, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-found:
-	mutex_unlock(&clock_list_sem);
-
-	return clk;
-}
-EXPORT_SYMBOL_GPL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL_GPL(clk_put);
-
-#ifdef CONFIG_PM
-static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
-{
-	static pm_message_t prev_state;
-	struct clk *clkp;
-
-	switch (state.event) {
-	case PM_EVENT_ON:
-		/* Resumeing from hibernation */
-		if (prev_state.event != PM_EVENT_FREEZE)
-			break;
-
-		list_for_each_entry(clkp, &clock_list, node) {
-			if (likely(clkp->ops)) {
-				unsigned long rate = clkp->rate;
-
-				if (likely(clkp->ops->set_parent))
-					clkp->ops->set_parent(clkp,
-						clkp->parent);
-				if (likely(clkp->ops->set_rate))
-					clkp->ops->set_rate(clkp,
-						rate, NO_CHANGE);
-				else if (likely(clkp->ops->recalc))
-					clkp->rate = clkp->ops->recalc(clkp);
-			}
-		}
-		break;
-	case PM_EVENT_FREEZE:
-		break;
-	case PM_EVENT_SUSPEND:
-		break;
-	}
-
-	prev_state = state;
-	return 0;
-}
-
-static int clks_sysdev_resume(struct sys_device *dev)
-{
-	return clks_sysdev_suspend(dev, PMSG_ON);
-}
-
-static struct sysdev_class clks_sysdev_class = {
-	.name = "clks",
-};
-
-static struct sysdev_driver clks_sysdev_driver = {
-	.suspend = clks_sysdev_suspend,
-	.resume = clks_sysdev_resume,
-};
-
-static struct sys_device clks_sysdev_dev = {
-	.cls = &clks_sysdev_class,
-};
-
-static int __init clk_sysdev_init(void)
-{
-	sysdev_class_register(&clks_sysdev_class);
-	sysdev_driver_register(&clks_sysdev_class, &clks_sysdev_driver);
-	sysdev_register(&clks_sysdev_dev);
-
-	return 0;
-}
-subsys_initcall(clk_sysdev_init);
-#endif
-
 int __init clk_init(void)
 {
 	int ret;
@@ -591,89 +49,19 @@ int __init clk_init(void)
 }
 
 /*
- *	debugfs support to trace clock tree hierarchy and attributes
+ * Returns a clock. Note that we first try to use device id on the bus
+ * and clock name. If this fails, we try to use clock name only.
  */
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
+struct clk *clk_get(struct device *dev, const char *con_id)
 {
-	int err;
-	struct dentry *d, *child;
-	struct clk *pa = c->parent;
-	char s[255];
-	char *p = s;
-
-	p += sprintf(p, "%s", c->name);
-	if (c->id >= 0)
-		sprintf(p, ":%d", c->id);
-	d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dentry = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
+	const char *dev_id = dev ? dev_name(dev) : NULL;
 
-err_out:
-	d = c->dentry;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
-		debugfs_remove(child);
-	debugfs_remove(c->dentry);
-	return err;
+	return clk_get_sys(dev_id, con_id);
 }
+EXPORT_SYMBOL_GPL(clk_get);
 
-static int clk_debugfs_register(struct clk *c)
+void clk_put(struct clk *clk)
 {
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dentry) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dentry) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
 }
+EXPORT_SYMBOL_GPL(clk_put);
 
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clock_list, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
-	return err;
-}
-late_initcall(clk_debugfs_init);
diff --git a/arch/sh/kernel/cpu/fpu.c b/arch/sh/kernel/cpu/fpu.c
new file mode 100644
index 0000000..7f1b70c
--- /dev/null
+++ b/arch/sh/kernel/cpu/fpu.c
@@ -0,0 +1,85 @@
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/fpu.h>
+
+int init_fpu(struct task_struct *tsk)
+{
+	if (tsk_used_math(tsk)) {
+		if ((boot_cpu_data.flags & CPU_HAS_FPU) && tsk == current)
+			unlazy_fpu(tsk, task_pt_regs(tsk));
+		return 0;
+	}
+
+	/*
+	 * Memory allocation at the first usage of the FPU and other state.
+	 */
+	if (!tsk->thread.xstate) {
+		tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!tsk->thread.xstate)
+			return -ENOMEM;
+	}
+
+	if (boot_cpu_data.flags & CPU_HAS_FPU) {
+		struct sh_fpu_hard_struct *fp = &tsk->thread.xstate->hardfpu;
+		memset(fp, 0, xstate_size);
+		fp->fpscr = FPSCR_INIT;
+	} else {
+		struct sh_fpu_soft_struct *fp = &tsk->thread.xstate->softfpu;
+		memset(fp, 0, xstate_size);
+		fp->fpscr = FPSCR_INIT;
+	}
+
+	set_stopped_child_used_math(tsk);
+	return 0;
+}
+
+#ifdef CONFIG_SH_FPU
+void __fpu_state_restore(void)
+{
+	struct task_struct *tsk = current;
+
+	restore_fpu(tsk);
+
+	task_thread_info(tsk)->status |= TS_USEDFPU;
+	tsk->fpu_counter++;
+}
+
+void fpu_state_restore(struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+
+	if (unlikely(!user_mode(regs))) {
+		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+		BUG();
+		return;
+	}
+
+	if (!tsk_used_math(tsk)) {
+		local_irq_enable();
+		/*
+		 * does a slab alloc which can sleep
+		 */
+		if (init_fpu(tsk)) {
+			/*
+			 * ran out of memory!
+			 */
+			do_group_exit(SIGKILL);
+			return;
+		}
+		local_irq_disable();
+	}
+
+	grab_fpu(regs);
+
+	__fpu_state_restore();
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+	TRAP_HANDLER_DECL;
+
+	fpu_state_restore(regs);
+}
+#endif /* CONFIG_SH_FPU */
diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c
index c0ad7d4..3e985aa 100644
--- a/arch/sh/kernel/cpu/hwblk.c
+++ b/arch/sh/kernel/cpu/hwblk.c
@@ -1,6 +1,5 @@
 #include <linux/clk.h>
 #include <linux/compiler.h>
-#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <asm/suspend.h>
@@ -147,6 +146,11 @@ int __init sh_hwblk_clk_register(struct clk *clks, int nr)
 
 	for (k = 0; !ret && (k < nr); k++) {
 		clkp = clks + k;
+
+		/* skip over clocks using hwblk 0 (HWBLK_UNKNOWN) */
+		if (!clkp->arch_flags)
+			continue;
+
 		clkp->ops = &sh_hwblk_clk_ops;
 		ret |= clk_register(clkp);
 	}
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 89b4b76..9766106 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -24,22 +24,32 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/smp.h>
-#ifdef CONFIG_SUPERH32
-#include <asm/ubc.h>
+#include <asm/sh_bios.h>
+
+#ifdef CONFIG_SH_FPU
+#define cpu_has_fpu	1
+#else
+#define cpu_has_fpu	0
+#endif
+
+#ifdef CONFIG_SH_DSP
+#define cpu_has_dsp	1
+#else
+#define cpu_has_dsp	0
 #endif
 
 /*
  * Generic wrapper for command line arguments to disable on-chip
  * peripherals (nofpu, nodsp, and so forth).
  */
-#define onchip_setup(x)				\
-static int x##_disabled __initdata = 0;		\
-						\
-static int __init x##_setup(char *opts)		\
-{						\
-	x##_disabled = 1;			\
-	return 1;				\
-}						\
+#define onchip_setup(x)					\
+static int x##_disabled __cpuinitdata = !cpu_has_##x;	\
+							\
+static int __cpuinit x##_setup(char *opts)			\
+{							\
+	x##_disabled = 1;				\
+	return 1;					\
+}							\
 __setup("no" __stringify(x), x##_setup);
 
 onchip_setup(fpu);
@@ -49,13 +59,13 @@ onchip_setup(dsp);
 #define CPUOPM		0xff2f0000
 #define CPUOPM_RABD	(1 << 5)
 
-static void __init speculative_execution_init(void)
+static void __cpuinit speculative_execution_init(void)
 {
 	/* Clear RABD */
-	ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+	__raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
 
 	/* Flush the update */
-	(void)ctrl_inl(CPUOPM);
+	(void)__raw_readl(CPUOPM);
 	ctrl_barrier();
 }
 #else
@@ -68,7 +78,7 @@ static void __init speculative_execution_init(void)
 #define EXPMASK_BRDSSLP		(1 << 1)
 #define EXPMASK_MMCAW		(1 << 4)
 
-static void __init expmask_init(void)
+static void __cpuinit expmask_init(void)
 {
 	unsigned long expmask = __raw_readl(EXPMASK);
 
@@ -89,7 +99,7 @@ static void __init expmask_init(void)
 #endif
 
 /* 2nd-level cache init */
-void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
+void __attribute__ ((weak)) l2_cache_init(void)
 {
 }
 
@@ -97,12 +107,12 @@ void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
  * Generic first-level cache init
  */
 #ifdef CONFIG_SUPERH32
-static void __uses_jump_to_uncached cache_init(void)
+static void cache_init(void)
 {
 	unsigned long ccr, flags;
 
 	jump_to_uncached();
-	ccr = ctrl_inl(CCR);
+	ccr = __raw_readl(CCR);
 
 	/*
 	 * At this point we don't know whether the cache is enabled or not - a
@@ -146,7 +156,7 @@ static void __uses_jump_to_uncached cache_init(void)
 			for (addr = addrstart;
 			     addr < addrstart + waysize;
 			     addr += current_cpu_data.dcache.linesz)
-				ctrl_outl(0, addr);
+				__raw_writel(0, addr);
 
 			addrstart += current_cpu_data.dcache.way_incr;
 		} while (--ways);
@@ -179,7 +189,7 @@ static void __uses_jump_to_uncached cache_init(void)
 
 	l2_cache_init();
 
-	ctrl_outl(flags, CCR);
+	__raw_writel(flags, CCR);
 	back_to_cached();
 }
 #else
@@ -207,8 +217,20 @@ static void detect_cache_shape(void)
 		l2_cache_shape = -1; /* No S-cache */
 }
 
+static void __cpuinit fpu_init(void)
+{
+	/* Disable the FPU */
+	if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {
+		printk("FPU Disabled\n");
+		current_cpu_data.flags &= ~CPU_HAS_FPU;
+	}
+
+	disable_fpu();
+	clear_used_math();
+}
+
 #ifdef CONFIG_SH_DSP
-static void __init release_dsp(void)
+static void __cpuinit release_dsp(void)
 {
 	unsigned long sr;
 
@@ -222,7 +244,7 @@ static void __init release_dsp(void)
 	);
 }
 
-static void __init dsp_init(void)
+static void __cpuinit dsp_init(void)
 {
 	unsigned long sr;
 
@@ -244,34 +266,41 @@ static void __init dsp_init(void)
 	if (sr & SR_DSP)
 		current_cpu_data.flags |= CPU_HAS_DSP;
 
+	/* Disable the DSP */
+	if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {
+		printk("DSP Disabled\n");
+		current_cpu_data.flags &= ~CPU_HAS_DSP;
+	}
+
 	/* Now that we've determined the DSP status, clear the DSP bit. */
 	release_dsp();
 }
+#else
+static inline void __cpuinit dsp_init(void) { }
 #endif /* CONFIG_SH_DSP */
 
 /**
- * sh_cpu_init
+ * cpu_init
  *
- * This is our initial entry point for each CPU, and is invoked on the boot
- * CPU prior to calling start_kernel(). For SMP, a combination of this and
- * start_secondary() will bring up each processor to a ready state prior
- * to hand forking the idle loop.
+ * This is our initial entry point for each CPU, and is invoked on the
+ * boot CPU prior to calling start_kernel(). For SMP, a combination of
+ * this and start_secondary() will bring up each processor to a ready
+ * state prior to hand forking the idle loop.
  *
- * We do all of the basic processor init here, including setting up the
- * caches, FPU, DSP, kicking the UBC, etc. By the time start_kernel() is
- * hit (and subsequently platform_setup()) things like determining the
- * CPU subtype and initial configuration will all be done.
+ * We do all of the basic processor init here, including setting up
+ * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and
+ * subsequently platform_setup()) things like determining the CPU
+ * subtype and initial configuration will all be done.
  *
  * Each processor family is still responsible for doing its own probing
- * and cache configuration in detect_cpu_and_cache_system().
+ * and cache configuration in cpu_probe().
  */
-
-asmlinkage void __init sh_cpu_init(void)
+asmlinkage void __cpuinit cpu_init(void)
 {
 	current_thread_info()->cpu = hard_smp_processor_id();
 
 	/* First, probe the CPU */
-	detect_cpu_and_cache_system();
+	cpu_probe();
 
 	if (current_cpu_data.type == CPU_SH_NONE)
 		panic("Unknown CPU");
@@ -302,18 +331,8 @@ asmlinkage void __init sh_cpu_init(void)
 		detect_cache_shape();
 	}
 
-	/* Disable the FPU */
-	if (fpu_disabled) {
-		printk("FPU Disabled\n");
-		current_cpu_data.flags &= ~CPU_HAS_FPU;
-	}
-
-	/* FPU initialization */
-	disable_fpu();
-	if ((current_cpu_data.flags & CPU_HAS_FPU)) {
-		current_thread_info()->status &= ~TS_USEDFPU;
-		clear_used_math();
-	}
+	fpu_init();
+	dsp_init();
 
 	/*
 	 * Initialize the per-CPU ASID cache very early, since the
@@ -321,18 +340,24 @@ asmlinkage void __init sh_cpu_init(void)
 	 */
 	current_cpu_data.asid_cache = NO_CONTEXT;
 
-#ifdef CONFIG_SH_DSP
-	/* Probe for DSP */
-	dsp_init();
-
-	/* Disable the DSP */
-	if (dsp_disabled) {
-		printk("DSP Disabled\n");
-		current_cpu_data.flags &= ~CPU_HAS_DSP;
-		release_dsp();
-	}
-#endif
-
 	speculative_execution_init();
 	expmask_init();
+
+	/* Do the rest of the boot processor setup */
+	if (raw_smp_processor_id() == 0) {
+		/* Save off the BIOS VBR, if there is one */
+		sh_bios_vbr_init();
+
+		/*
+		 * Setup VBR for boot CPU. Secondary CPUs do this through
+		 * start_secondary().
+		 */
+		per_cpu_trap_init();
+
+		/*
+		 * Boot processor to setup the FP and extended state
+		 * context info.
+		 */
+		init_thread_xstate();
+	}
 }
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 06e7e29..96a2395 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -123,7 +123,7 @@ static void enable_intc_irq(unsigned int irq)
 		bitmask = 1 << (irq - 32);
 	}
 
-	ctrl_outl(bitmask, reg);
+	__raw_writel(bitmask, reg);
 }
 
 static void disable_intc_irq(unsigned int irq)
@@ -139,7 +139,7 @@ static void disable_intc_irq(unsigned int irq)
 		bitmask = 1 << (irq - 32);
 	}
 
-	ctrl_outl(bitmask, reg);
+	__raw_writel(bitmask, reg);
 }
 
 static void mask_and_ack_intc(unsigned int irq)
@@ -170,11 +170,11 @@ void __init plat_irq_setup(void)
 
 
 	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
-	ctrl_outl(-1, INTC_INTDSB_0);
-	ctrl_outl(-1, INTC_INTDSB_1);
+	__raw_writel(-1, INTC_INTDSB_0);
+	__raw_writel(-1, INTC_INTDSB_1);
 
 	for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
-		ctrl_outl( NO_PRIORITY, reg);
+		__raw_writel( NO_PRIORITY, reg);
 
 
 #ifdef CONFIG_SH_CAYMAN
@@ -199,7 +199,7 @@ void __init plat_irq_setup(void)
 			reg = INTC_ICR_SET;
 			i = IRQ_IRL0;
 		}
-		ctrl_outl(INTC_ICR_IRLM, reg);
+		__raw_writel(INTC_ICR_IRLM, reg);
 
 		/* Set interrupt priorities according to platform description */
 		for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
@@ -207,7 +207,7 @@ void __init plat_irq_setup(void)
 				((i % INTC_INTPRI_PPREG) * 4);
 			if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
 				/* Upon the 7th, set Priority Register */
-				ctrl_outl(data, reg);
+				__raw_writel(data, reg);
 				data = 0;
 				reg += 8;
 			}
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index 4fe8631..0c9f24d 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -31,7 +31,7 @@ static const int pfc_divisors[] = {1,2,0,4};
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
 static struct clk_ops sh7619_master_clk_ops = {
@@ -40,7 +40,7 @@ static struct clk_ops sh7619_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -50,7 +50,7 @@ static struct clk_ops sh7619_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
 static struct clk_ops sh7619_bus_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 1db6d888..bab8e75 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -13,7 +13,7 @@
 #include <asm/processor.h>
 #include <asm/cache.h>
 
-int __init detect_cpu_and_cache_system(void)
+void __cpuinit cpu_probe(void)
 {
 #if defined(CONFIG_CPU_SUBTYPE_SH7619)
 	boot_cpu_data.type			= CPU_SH7619;
@@ -30,7 +30,4 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
 	boot_cpu_data.icache = boot_cpu_data.dcache;
 	boot_cpu_data.family = CPU_FAMILY_SH2;
-
-	return 0;
 }
-
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 114c7ce..c363851 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -128,17 +128,14 @@ static struct platform_device eth_device = {
 };
 
 static struct sh_timer_config cmt0_platform_data = {
-	.name = "CMT0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt0_resources[] = {
 	[0] = {
-		.name	= "CMT0",
 		.start	= 0xf84a0072,
 		.end	= 0xf84a0077,
 		.flags	= IORESOURCE_MEM,
@@ -160,17 +157,14 @@ static struct platform_device cmt0_device = {
 };
 
 static struct sh_timer_config cmt1_platform_data = {
-	.name = "CMT1",
 	.channel_offset = 0x08,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt1_resources[] = {
 	[0] = {
-		.name	= "CMT1",
 		.start	= 0xf84a0078,
 		.end	= 0xf84a007d,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 7814c76..b26264d 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	return 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+	return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
@@ -43,7 +43,7 @@ static struct clk_ops sh7201_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -53,7 +53,7 @@ static struct clk_ops sh7201_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -63,7 +63,7 @@ static struct clk_ops sh7201_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
+	int idx = ((__raw_readw(FREQCR) >> 4) & 0x0007);
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 9409869..7e75d8f 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -39,7 +39,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ;
+	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
 }
 
 static struct clk_ops sh7203_master_clk_ops = {
@@ -48,7 +48,7 @@ static struct clk_ops sh7203_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -58,7 +58,7 @@ static struct clk_ops sh7203_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx-2];
 }
 
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index c2268bd..b27a5e2 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12};
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7206_master_clk_ops = {
@@ -43,7 +43,7 @@ static struct clk_ops sh7206_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -53,7 +53,7 @@ static struct clk_ops sh7206_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+	return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7206_bus_clk_ops = {
@@ -62,7 +62,7 @@ static struct clk_ops sh7206_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FREQCR) & 0x0007);
+	int idx = (__raw_readw(FREQCR) & 0x0007);
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index d395ce5..488d24e 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -26,8 +26,7 @@
 /*
  * Save FPU registers onto task structure.
  */
-void
-save_fpu(struct task_struct *tsk)
+void save_fpu(struct task_struct *tsk)
 {
 	unsigned long dummy;
 
@@ -52,7 +51,7 @@ save_fpu(struct task_struct *tsk)
 		     "fmov.s	fr0, @-%0\n\t"
 		     "lds	%3, fpscr\n\t"
 		     : "=r" (dummy)
-		     : "0" ((char *)(&tsk->thread.fpu.hard.status)),
+		     : "0" ((char *)(&tsk->thread.xstate->hardfpu.status)),
 		       "r" (FPSCR_RCHG),
 		       "r" (FPSCR_INIT)
 		     : "memory");
@@ -60,8 +59,7 @@ save_fpu(struct task_struct *tsk)
 	disable_fpu();
 }
 
-static void
-restore_fpu(struct task_struct *tsk)
+void restore_fpu(struct task_struct *tsk)
 {
 	unsigned long dummy;
 
@@ -85,45 +83,12 @@ restore_fpu(struct task_struct *tsk)
 		     "lds.l	@%0+, fpscr\n\t"
 		     "lds.l	@%0+, fpul\n\t"
 		     : "=r" (dummy)
-		     : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG)
+		     : "0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
 		     : "memory");
 	disable_fpu();
 }
 
 /*
- * Load the FPU with signalling NANS.  This bit pattern we're using
- * has the property that no matter wether considered as single or as
- * double precission represents signaling NANS.
- */
-
-static void
-fpu_init(void)
-{
-	enable_fpu();
-	asm volatile("lds	%0, fpul\n\t"
-		     "fsts	fpul, fr0\n\t"
-		     "fsts	fpul, fr1\n\t"
-		     "fsts	fpul, fr2\n\t"
-		     "fsts	fpul, fr3\n\t"
-		     "fsts	fpul, fr4\n\t"
-		     "fsts	fpul, fr5\n\t"
-		     "fsts	fpul, fr6\n\t"
-		     "fsts	fpul, fr7\n\t"
-		     "fsts	fpul, fr8\n\t"
-		     "fsts	fpul, fr9\n\t"
-		     "fsts	fpul, fr10\n\t"
-		     "fsts	fpul, fr11\n\t"
-		     "fsts	fpul, fr12\n\t"
-		     "fsts	fpul, fr13\n\t"
-		     "fsts	fpul, fr14\n\t"
-		     "fsts	fpul, fr15\n\t"
-		     "lds	%2, fpscr\n\t"
-		     : /* no output */
-		     : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT));
-	disable_fpu();
-}
-
-/*
  *	Emulate arithmetic ops on denormalized number for some FPU insns.
  */
 
@@ -490,9 +455,9 @@ ieee_fpe_handler (struct pt_regs *regs)
 	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
 		struct task_struct *tsk = current;
 
-		if ((tsk->thread.fpu.hard.fpscr & FPSCR_FPU_ERROR)) {
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_FPU_ERROR)) {
 			/* FPU error */
-			denormal_to_double (&tsk->thread.fpu.hard,
+			denormal_to_double (&tsk->thread.xstate->hardfpu,
 					    (finsn >> 8) & 0xf);
 		} else
 			return 0;
@@ -507,9 +472,9 @@ ieee_fpe_handler (struct pt_regs *regs)
 
 		n = (finsn >> 8) & 0xf;
 		m = (finsn >> 4) & 0xf;
-		hx = tsk->thread.fpu.hard.fp_regs[n];
-		hy = tsk->thread.fpu.hard.fp_regs[m];
-		fpscr = tsk->thread.fpu.hard.fpscr;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
 		prec = fpscr & (1 << 19);
 
 		if ((fpscr & FPSCR_FPU_ERROR)
@@ -519,15 +484,15 @@ ieee_fpe_handler (struct pt_regs *regs)
 
 			/* FPU error because of denormal */
 			llx = ((long long) hx << 32)
-			       | tsk->thread.fpu.hard.fp_regs[n+1];
+			       | tsk->thread.xstate->hardfpu.fp_regs[n+1];
 			lly = ((long long) hy << 32)
-			       | tsk->thread.fpu.hard.fp_regs[m+1];
+			       | tsk->thread.xstate->hardfpu.fp_regs[m+1];
 			if ((hx & 0x7fffffff) >= 0x00100000)
 				llx = denormal_muld(lly, llx);
 			else
 				llx = denormal_muld(llx, lly);
-			tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
-			tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
 		} else if ((fpscr & FPSCR_FPU_ERROR)
 		     && (!prec && ((hx & 0x7fffffff) < 0x00800000
 				   || (hy & 0x7fffffff) < 0x00800000))) {
@@ -536,7 +501,7 @@ ieee_fpe_handler (struct pt_regs *regs)
 				hx = denormal_mulf(hy, hx);
 			else
 				hx = denormal_mulf(hx, hy);
-			tsk->thread.fpu.hard.fp_regs[n] = hx;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
 		} else
 			return 0;
 
@@ -550,9 +515,9 @@ ieee_fpe_handler (struct pt_regs *regs)
 
 		n = (finsn >> 8) & 0xf;
 		m = (finsn >> 4) & 0xf;
-		hx = tsk->thread.fpu.hard.fp_regs[n];
-		hy = tsk->thread.fpu.hard.fp_regs[m];
-		fpscr = tsk->thread.fpu.hard.fpscr;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
 		prec = fpscr & (1 << 19);
 
 		if ((fpscr & FPSCR_FPU_ERROR)
@@ -562,15 +527,15 @@ ieee_fpe_handler (struct pt_regs *regs)
 
 			/* FPU error because of denormal */
 			llx = ((long long) hx << 32)
-			       | tsk->thread.fpu.hard.fp_regs[n+1];
+			       | tsk->thread.xstate->hardfpu.fp_regs[n+1];
 			lly = ((long long) hy << 32)
-			       | tsk->thread.fpu.hard.fp_regs[m+1];
+			       | tsk->thread.xstate->hardfpu.fp_regs[m+1];
 			if ((finsn & 0xf00f) == 0xf000)
 				llx = denormal_addd(llx, lly);
 			else
 				llx = denormal_addd(llx, lly ^ (1LL << 63));
-			tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
-			tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n+1] = llx & 0xffffffff;
 		} else if ((fpscr & FPSCR_FPU_ERROR)
 		     && (!prec && ((hx & 0x7fffffff) < 0x00800000
 				   || (hy & 0x7fffffff) < 0x00800000))) {
@@ -579,7 +544,7 @@ ieee_fpe_handler (struct pt_regs *regs)
 				hx = denormal_addf(hx, hy);
 			else
 				hx = denormal_addf(hx, hy ^ 0x80000000);
-			tsk->thread.fpu.hard.fp_regs[n] = hx;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
 		} else
 			return 0;
 
@@ -597,7 +562,7 @@ BUILD_TRAP_HANDLER(fpu_error)
 
 	__unlazy_fpu(tsk, regs);
 	if (ieee_fpe_handler(regs)) {
-		tsk->thread.fpu.hard.fpscr &=
+		tsk->thread.xstate->hardfpu.fpscr &=
 			~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
 		grab_fpu(regs);
 		restore_fpu(tsk);
@@ -607,33 +572,3 @@ BUILD_TRAP_HANDLER(fpu_error)
 
 	force_sig(SIGFPE, tsk);
 }
-
-void fpu_state_restore(struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-
-	grab_fpu(regs);
-	if (unlikely(!user_mode(regs))) {
-		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
-		BUG();
-		return;
-	}
-
-	if (likely(used_math())) {
-		/* Using the FPU again.  */
-		restore_fpu(tsk);
-	} else	{
-		/* First time FPU user.  */
-		fpu_init();
-		set_used_math();
-	}
-	task_thread_info(tsk)->status |= TS_USEDFPU;
-	tsk->fpu_counter++;
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
-	TRAP_HANDLER_DECL;
-
-	fpu_state_restore(regs);
-}
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index 6825d65..48e97a2 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -13,7 +13,7 @@
 #include <asm/processor.h>
 #include <asm/cache.h>
 
-int __init detect_cpu_and_cache_system(void)
+void __cpuinit cpu_probe(void)
 {
 	boot_cpu_data.family			= CPU_FAMILY_SH2A;
 
@@ -51,6 +51,4 @@ int __init detect_cpu_and_cache_system(void)
 	 * on the cache info.
 	 */
 	boot_cpu_data.icache		= boot_cpu_data.dcache;
-
-	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 8f669dc..6c96ea0 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -115,16 +115,13 @@ static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct sh_timer_config mtu2_0_platform_data = {
-	.name = "MTU2_0",
 	.channel_offset = -0x80,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_0_resources[] = {
 	[0] = {
-		.name	= "MTU2_0",
 		.start	= 0xff801300,
 		.end	= 0xff801326,
 		.flags	= IORESOURCE_MEM,
@@ -146,16 +143,13 @@ static struct platform_device mtu2_0_device = {
 };
 
 static struct sh_timer_config mtu2_1_platform_data = {
-	.name = "MTU2_1",
 	.channel_offset = -0x100,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_1_resources[] = {
 	[0] = {
-		.name	= "MTU2_1",
 		.start	= 0xff801380,
 		.end	= 0xff801390,
 		.flags	= IORESOURCE_MEM,
@@ -177,16 +171,13 @@ static struct platform_device mtu2_1_device = {
 };
 
 static struct sh_timer_config mtu2_2_platform_data = {
-	.name = "MTU2_2",
 	.channel_offset = 0x80,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_2_resources[] = {
 	[0] = {
-		.name	= "MTU2_2",
 		.start	= 0xff801000,
 		.end	= 0xff80100a,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index 4ccfeb5..d08bf4c 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -318,16 +318,13 @@ static struct platform_device rtc_device = {
 };
 
 static struct sh_timer_config mtu2_0_platform_data = {
-	.name = "MTU2_0",
 	.channel_offset = -0x80,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_0_resources[] = {
 	[0] = {
-		.name	= "MTU2_0",
 		.start	= 0xfffe4300,
 		.end	= 0xfffe4326,
 		.flags	= IORESOURCE_MEM,
@@ -349,16 +346,13 @@ static struct platform_device mtu2_0_device = {
 };
 
 static struct sh_timer_config mtu2_1_platform_data = {
-	.name = "MTU2_1",
 	.channel_offset = -0x100,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_1_resources[] = {
 	[0] = {
-		.name	= "MTU2_1",
 		.start	= 0xfffe4380,
 		.end	= 0xfffe4390,
 		.flags	= IORESOURCE_MEM,
@@ -380,16 +374,13 @@ static struct platform_device mtu2_1_device = {
 };
 
 static struct sh_timer_config mtu2_2_platform_data = {
-	.name = "MTU2_2",
 	.channel_offset = 0x80,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_2_resources[] = {
 	[0] = {
-		.name	= "MTU2_2",
 		.start	= 0xfffe4000,
 		.end	= 0xfffe400a,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 3136966..832f401 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -234,17 +234,14 @@ static struct platform_device scif3_device = {
 };
 
 static struct sh_timer_config cmt0_platform_data = {
-	.name = "CMT0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt0_resources[] = {
 	[0] = {
-		.name	= "CMT0",
 		.start	= 0xfffec002,
 		.end	= 0xfffec007,
 		.flags	= IORESOURCE_MEM,
@@ -266,17 +263,14 @@ static struct platform_device cmt0_device = {
 };
 
 static struct sh_timer_config cmt1_platform_data = {
-	.name = "CMT1",
 	.channel_offset = 0x08,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt1_resources[] = {
 	[0] = {
-		.name	= "CMT1",
 		.start	= 0xfffec008,
 		.end	= 0xfffec00d,
 		.flags	= IORESOURCE_MEM,
@@ -298,16 +292,13 @@ static struct platform_device cmt1_device = {
 };
 
 static struct sh_timer_config mtu2_0_platform_data = {
-	.name = "MTU2_0",
 	.channel_offset = -0x80,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_0_resources[] = {
 	[0] = {
-		.name	= "MTU2_0",
 		.start	= 0xfffe4300,
 		.end	= 0xfffe4326,
 		.flags	= IORESOURCE_MEM,
@@ -329,16 +320,13 @@ static struct platform_device mtu2_0_device = {
 };
 
 static struct sh_timer_config mtu2_1_platform_data = {
-	.name = "MTU2_1",
 	.channel_offset = -0x100,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_1_resources[] = {
 	[0] = {
-		.name	= "MTU2_1",
 		.start	= 0xfffe4380,
 		.end	= 0xfffe4390,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 0648735..dc47b04 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -194,17 +194,14 @@ static struct platform_device scif3_device = {
 };
 
 static struct sh_timer_config cmt0_platform_data = {
-	.name = "CMT0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt0_resources[] = {
 	[0] = {
-		.name	= "CMT0",
 		.start	= 0xfffec002,
 		.end	= 0xfffec007,
 		.flags	= IORESOURCE_MEM,
@@ -226,17 +223,14 @@ static struct platform_device cmt0_device = {
 };
 
 static struct sh_timer_config cmt1_platform_data = {
-	.name = "CMT1",
 	.channel_offset = 0x08,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 0, /* disabled due to code generation issues */
 };
 
 static struct resource cmt1_resources[] = {
 	[0] = {
-		.name	= "CMT1",
 		.start	= 0xfffec008,
 		.end	= 0xfffec00d,
 		.flags	= IORESOURCE_MEM,
@@ -258,16 +252,13 @@ static struct platform_device cmt1_device = {
 };
 
 static struct sh_timer_config mtu2_0_platform_data = {
-	.name = "MTU2_0",
 	.channel_offset = -0x80,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_0_resources[] = {
 	[0] = {
-		.name	= "MTU2_0",
 		.start	= 0xfffe4300,
 		.end	= 0xfffe4326,
 		.flags	= IORESOURCE_MEM,
@@ -289,16 +280,13 @@ static struct platform_device mtu2_0_device = {
 };
 
 static struct sh_timer_config mtu2_1_platform_data = {
-	.name = "MTU2_1",
 	.channel_offset = -0x100,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_1_resources[] = {
 	[0] = {
-		.name	= "MTU2_1",
 		.start	= 0xfffe4380,
 		.end	= 0xfffe4390,
 		.flags	= IORESOURCE_MEM,
@@ -320,16 +308,13 @@ static struct platform_device mtu2_1_device = {
 };
 
 static struct sh_timer_config mtu2_2_platform_data = {
-	.name = "MTU2_2",
 	.channel_offset = 0x80,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource mtu2_2_resources[] = {
 	[0] = {
-		.name	= "MTU2_2",
 		.start	= 0xfffe4000,
 		.end	= 0xfffe400a,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
index 27b8738..b78384a 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -28,7 +28,7 @@ static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	clk->rate *= pfc_divisors[idx];
@@ -40,7 +40,7 @@ static struct clk_ops sh3_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	return clk->parent->rate / pfc_divisors[idx];
@@ -52,7 +52,7 @@ static struct clk_ops sh3_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
 
 	return clk->parent->rate / stc_multipliers[idx];
@@ -64,7 +64,7 @@ static struct clk_ops sh3_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
 	return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
index 0ca8f2c..0ecea14 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -32,7 +32,7 @@ static int pfc_divisors[]    = { 1, 2, 3, 4, 6, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003];
+	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0003];
 }
 
 static struct clk_ops sh7705_master_clk_ops = {
@@ -41,7 +41,7 @@ static struct clk_ops sh7705_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = ctrl_inw(FRQCR) & 0x0003;
+	int idx = __raw_readw(FRQCR) & 0x0003;
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -51,7 +51,7 @@ static struct clk_ops sh7705_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
+	int idx = (__raw_readw(FRQCR) & 0x0300) >> 8;
 	return clk->parent->rate / stc_multipliers[idx];
 }
 
@@ -61,7 +61,7 @@ static struct clk_ops sh7705_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
+	int idx = (__raw_readw(FRQCR) & 0x0030) >> 4;
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
index 4bf7887..6f9ff8b 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7706.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -24,7 +24,7 @@ static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	clk->rate *= pfc_divisors[idx];
@@ -36,7 +36,7 @@ static struct clk_ops sh7706_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	return clk->parent->rate / pfc_divisors[idx];
@@ -48,7 +48,7 @@ static struct clk_ops sh7706_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
 
 	return clk->parent->rate / stc_multipliers[idx];
@@ -60,7 +60,7 @@ static struct clk_ops sh7706_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
 	return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index e874950..f302ba0 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -24,7 +24,7 @@ static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	clk->rate *= pfc_divisors[idx];
@@ -36,7 +36,7 @@ static struct clk_ops sh7709_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
 
 	return clk->parent->rate / pfc_divisors[idx];
@@ -48,7 +48,7 @@ static struct clk_ops sh7709_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = (frqcr & 0x0080) ?
 		((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
 
@@ -61,7 +61,7 @@ static struct clk_ops sh7709_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
 
 	return clk->parent->rate / ifc_divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7710.c b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
index 030a58b..29a87d8 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7710.c
@@ -26,7 +26,7 @@ static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
+	clk->rate *= md_table[__raw_readw(FRQCR) & 0x0007];
 }
 
 static struct clk_ops sh7710_master_clk_ops = {
@@ -35,7 +35,7 @@ static struct clk_ops sh7710_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0007);
+	int idx = (__raw_readw(FRQCR) & 0x0007);
 	return clk->parent->rate / md_table[idx];
 }
 
@@ -45,7 +45,7 @@ static struct clk_ops sh7710_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
+	int idx = (__raw_readw(FRQCR) & 0x0700) >> 8;
 	return clk->parent->rate / md_table[idx];
 }
 
@@ -55,7 +55,7 @@ static struct clk_ops sh7710_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
+	int idx = (__raw_readw(FRQCR) & 0x0070) >> 4;
 	return clk->parent->rate / md_table[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
index 6428ee6..b0d0c52 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7712.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c
@@ -23,7 +23,7 @@ static int divisors[]    = { 1, 2, 3, 4, 6 };
 
 static void master_clk_init(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = (frqcr & 0x0300) >> 8;
 
 	clk->rate *= multipliers[idx];
@@ -35,7 +35,7 @@ static struct clk_ops sh7712_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = frqcr & 0x0007;
 
 	return clk->parent->rate / divisors[idx];
@@ -47,7 +47,7 @@ static struct clk_ops sh7712_module_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int frqcr = ctrl_inw(FRQCR);
+	int frqcr = __raw_readw(FRQCR);
 	int idx = (frqcr & 0x0030) >> 4;
 
 	return clk->parent->rate / divisors[idx];
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3f7e2a2..f6a389c 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -132,7 +132,6 @@ ENTRY(tlb_protection_violation_store)
 	 mov	#1, r5
 
 call_handle_tlbmiss:
-	setup_frame_reg
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
@@ -365,6 +364,8 @@ handle_exception:
 	 mov.l	@k2, k2		! read out vector and keep in k2
 
 handle_exception_special:
+	setup_frame_reg
+
 	! Setup return address and jump to exception handler
 	mov.l	7f, r9		! fetch return address
 	stc	r2_bank, r0	! k2 (vector)
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 46610c3..99b4d02 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -49,7 +49,7 @@ ENTRY(exception_handling_table)
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 	.long	nmi_trap_handler	/* 1C0 */	! Allow trap to debugger
-	.long	break_point_trap	/* 1E0 */
+	.long	breakpoint_trap_handler	/* 1E0 */
 
 	/*
 	 * Pad the remainder of the table out, exceptions residing in far
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index f9c7df6..bf23c32 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -16,7 +16,7 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 
-int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
+void __cpuinit cpu_probe(void)
 {
 	unsigned long addr0, addr1, data0, data1, data2, data3;
 
@@ -30,23 +30,23 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
 	addr1 = CACHE_OC_ADDRESS_ARRAY + (1 << 12);
 
 	/* First, write back & invalidate */
-	data0  = ctrl_inl(addr0);
-	ctrl_outl(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
-	data1  = ctrl_inl(addr1);
-	ctrl_outl(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
+	data0  = __raw_readl(addr0);
+	__raw_writel(data0&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr0);
+	data1  = __raw_readl(addr1);
+	__raw_writel(data1&~(SH_CACHE_VALID|SH_CACHE_UPDATED), addr1);
 
 	/* Next, check if there's shadow or not */
-	data0 = ctrl_inl(addr0);
+	data0 = __raw_readl(addr0);
 	data0 ^= SH_CACHE_VALID;
-	ctrl_outl(data0, addr0);
-	data1 = ctrl_inl(addr1);
+	__raw_writel(data0, addr0);
+	data1 = __raw_readl(addr1);
 	data2 = data1 ^ SH_CACHE_VALID;
-	ctrl_outl(data2, addr1);
-	data3 = ctrl_inl(addr0);
+	__raw_writel(data2, addr1);
+	data3 = __raw_readl(addr0);
 
 	/* Lastly, invaliate them. */
-	ctrl_outl(data0&~SH_CACHE_VALID, addr0);
-	ctrl_outl(data2&~SH_CACHE_VALID, addr1);
+	__raw_writel(data0&~SH_CACHE_VALID, addr0);
+	__raw_writel(data2&~SH_CACHE_VALID, addr1);
 
 	back_to_cached();
 
@@ -94,9 +94,9 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
 		boot_cpu_data.dcache.way_incr	= (1 << 13);
 		boot_cpu_data.dcache.entry_mask	= 0x1ff0;
 		boot_cpu_data.dcache.sets	= 512;
-		ctrl_outl(CCR_CACHE_32KB, CCR3_REG);
+		__raw_writel(CCR_CACHE_32KB, CCR3_REG);
 #else
-		ctrl_outl(CCR_CACHE_16KB, CCR3_REG);
+		__raw_writel(CCR_CACHE_16KB, CCR3_REG);
 #endif
 #endif
 	}
@@ -108,6 +108,4 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
 	boot_cpu_data.icache = boot_cpu_data.dcache;
 
 	boot_cpu_data.family = CPU_FAMILY_SH3;
-
-	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c
index c988468..53be70b 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh3.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c
@@ -58,7 +58,7 @@ static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
 void __init plat_irq_setup_pins(int mode)
 {
 	if (mode == IRQ_MODE_IRQ) {
-		ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+		__raw_writew(__raw_readw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
 		register_intc_controller(&intc_desc_irq0123);
 		return;
 	}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 7b892d6..baadd7f 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -124,16 +124,13 @@ static struct platform_device rtc_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xfffffe94,
 		.end	= 0xfffffe9f,
 		.flags	= IORESOURCE_MEM,
@@ -155,16 +152,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0xe,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xfffffea0,
 		.end	= 0xfffffeab,
 		.flags	= IORESOURCE_MEM,
@@ -186,15 +180,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1a,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xfffffeac,
 		.end	= 0xfffffebb,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index bc0c4f6..3cf8c8e 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -157,16 +157,13 @@ static struct platform_device scif2_device = {
 #endif
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xfffffe94,
 		.end	= 0xfffffe9f,
 		.flags	= IORESOURCE_MEM,
@@ -188,16 +185,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0xe,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xfffffea0,
 		.end	= 0xfffffeab,
 		.flags	= IORESOURCE_MEM,
@@ -219,15 +213,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1a,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xfffffeac,
 		.end	= 0xfffffebb,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 0845a3a..b0c2fb4 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -127,16 +127,13 @@ static struct platform_device scif1_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xa412fe94,
 		.end	= 0xa412fe9f,
 		.flags	= IORESOURCE_MEM,
@@ -158,16 +155,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0xe,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xa412fea0,
 		.end	= 0xa412feab,
 		.flags	= IORESOURCE_MEM,
@@ -189,15 +183,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1a,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xa412feac,
 		.end	= 0xa412feb5,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index a718a62..24b1713 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -130,17 +130,14 @@ static struct platform_device usbf_device = {
 };
 
 static struct sh_timer_config cmt0_platform_data = {
-	.name = "CMT0",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
 
 static struct resource cmt0_resources[] = {
 	[0] = {
-		.name	= "CMT0",
 		.start	= 0x044a0010,
 		.end	= 0x044a001b,
 		.flags	= IORESOURCE_MEM,
@@ -162,15 +159,12 @@ static struct platform_device cmt0_device = {
 };
 
 static struct sh_timer_config cmt1_platform_data = {
-	.name = "CMT1",
 	.channel_offset = 0x20,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource cmt1_resources[] = {
 	[0] = {
-		.name	= "CMT1",
 		.start	= 0x044a0020,
 		.end	= 0x044a002b,
 		.flags	= IORESOURCE_MEM,
@@ -192,15 +186,12 @@ static struct platform_device cmt1_device = {
 };
 
 static struct sh_timer_config cmt2_platform_data = {
-	.name = "CMT2",
 	.channel_offset = 0x30,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource cmt2_resources[] = {
 	[0] = {
-		.name	= "CMT2",
 		.start	= 0x044a0030,
 		.end	= 0x044a003b,
 		.flags	= IORESOURCE_MEM,
@@ -222,15 +213,12 @@ static struct platform_device cmt2_device = {
 };
 
 static struct sh_timer_config cmt3_platform_data = {
-	.name = "CMT3",
 	.channel_offset = 0x40,
 	.timer_bit = 3,
-	.clk = "peripheral_clk",
 };
 
 static struct resource cmt3_resources[] = {
 	[0] = {
-		.name	= "CMT3",
 		.start	= 0x044a0040,
 		.end	= 0x044a004b,
 		.flags	= IORESOURCE_MEM,
@@ -252,15 +240,12 @@ static struct platform_device cmt3_device = {
 };
 
 static struct sh_timer_config cmt4_platform_data = {
-	.name = "CMT4",
 	.channel_offset = 0x50,
 	.timer_bit = 4,
-	.clk = "peripheral_clk",
 };
 
 static struct resource cmt4_resources[] = {
 	[0] = {
-		.name	= "CMT4",
 		.start	= 0x044a0050,
 		.end	= 0x044a005b,
 		.flags	= IORESOURCE_MEM,
@@ -282,16 +267,13 @@ static struct platform_device cmt4_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x02,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xa412fe94,
 		.end	= 0xa412fe9f,
 		.flags	= IORESOURCE_MEM,
@@ -313,16 +295,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0xe,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xa412fea0,
 		.end	= 0xa412feab,
 		.flags	= IORESOURCE_MEM,
@@ -344,15 +323,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1a,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xa412feac,
 		.end	= 0xa412feb5,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 21421e3..4eabc68c 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -12,9 +12,10 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
 
 #define CPG2_FRQCR3	0xfe0a0018
 
@@ -23,7 +24,7 @@ static int frqcr3_values[]   = { 0, 1, 2, 3, 4, 5, 6  };
 
 static unsigned long emi_clk_recalc(struct clk *clk)
 {
-	int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
+	int idx = __raw_readl(CPG2_FRQCR3) & 0x0007;
 	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
@@ -45,14 +46,13 @@ static struct clk_ops sh4202_emi_clk_ops = {
 };
 
 static struct clk sh4202_emi_clk = {
-	.name		= "emi_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_emi_clk_ops,
 };
 
 static unsigned long femi_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
+	int idx = (__raw_readl(CPG2_FRQCR3) >> 3) & 0x0007;
 	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
@@ -61,7 +61,6 @@ static struct clk_ops sh4202_femi_clk_ops = {
 };
 
 static struct clk sh4202_femi_clk = {
-	.name		= "femi_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_femi_clk_ops,
 };
@@ -92,7 +91,7 @@ static void shoc_clk_init(struct clk *clk)
 
 static unsigned long shoc_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
+	int idx = (__raw_readl(CPG2_FRQCR3) >> 6) & 0x0007;
 	return clk->parent->rate / frqcr3_divisors[idx];
 }
 
@@ -122,10 +121,10 @@ static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 
 	tmp = frqcr3_lookup(clk, rate);
 
-	frqcr3 = ctrl_inl(CPG2_FRQCR3);
+	frqcr3 = __raw_readl(CPG2_FRQCR3);
 	frqcr3 &= ~(0x0007 << 6);
 	frqcr3 |= tmp << 6;
-	ctrl_outl(frqcr3, CPG2_FRQCR3);
+	__raw_writel(frqcr3, CPG2_FRQCR3);
 
 	clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
 
@@ -139,7 +138,6 @@ static struct clk_ops sh4202_shoc_clk_ops = {
 };
 
 static struct clk sh4202_shoc_clk = {
-	.name		= "shoc_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh4202_shoc_clk_ops,
 };
@@ -150,6 +148,15 @@ static struct clk *sh4202_onchip_clocks[] = {
 	&sh4202_shoc_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),
+	CLKDEV_CON_ID("femi_clk", &sh4202_femi_clk),
+	CLKDEV_CON_ID("shoc_clk", &sh4202_shoc_clk),
+};
+
 int __init arch_clk_init(void)
 {
 	struct clk *clk;
@@ -167,5 +174,7 @@ int __init arch_clk_init(void)
 
 	clk_put(clk);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
index 73294d9..5add75c 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -28,7 +28,7 @@ static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007];
+	clk->rate *= pfc_divisors[__raw_readw(FRQCR) & 0x0007];
 }
 
 static struct clk_ops sh4_master_clk_ops = {
@@ -37,7 +37,7 @@ static struct clk_ops sh4_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) & 0x0007);
+	int idx = (__raw_readw(FRQCR) & 0x0007);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -47,7 +47,7 @@ static struct clk_ops sh4_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
+	int idx = (__raw_readw(FRQCR) >> 3) & 0x0007;
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -57,7 +57,7 @@ static struct clk_ops sh4_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
+	int idx = (__raw_readw(FRQCR) >> 6) & 0x0007;
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index e97857a..447482d 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -85,14 +85,14 @@ void save_fpu(struct task_struct *tsk)
 		      "fmov.s	fr1, @-%0\n\t"
 		      "fmov.s	fr0, @-%0\n\t"
 		      "lds	%3, fpscr\n\t":"=r" (dummy)
-		      :"0"((char *)(&tsk->thread.fpu.hard.status)),
+		      :"0"((char *)(&tsk->thread.xstate->hardfpu.status)),
 		      "r"(FPSCR_RCHG), "r"(FPSCR_INIT)
 		      :"memory");
 
 	disable_fpu();
 }
 
-static void restore_fpu(struct task_struct *tsk)
+void restore_fpu(struct task_struct *tsk)
 {
 	unsigned long dummy;
 
@@ -135,62 +135,11 @@ static void restore_fpu(struct task_struct *tsk)
 		      "lds.l	@%0+, fpscr\n\t"
 		      "lds.l	@%0+, fpul\n\t"
 		      :"=r" (dummy)
-		      :"0"(&tsk->thread.fpu), "r"(FPSCR_RCHG)
+		      :"0" (tsk->thread.xstate), "r" (FPSCR_RCHG)
 		      :"memory");
 	disable_fpu();
 }
 
-/*
- * Load the FPU with signalling NANS.  This bit pattern we're using
- * has the property that no matter wether considered as single or as
- * double precision represents signaling NANS.
- */
-
-static void fpu_init(void)
-{
-	enable_fpu();
-	asm volatile (	"lds	%0, fpul\n\t"
-			"lds	%1, fpscr\n\t"
-			"fsts	fpul, fr0\n\t"
-			"fsts	fpul, fr1\n\t"
-			"fsts	fpul, fr2\n\t"
-			"fsts	fpul, fr3\n\t"
-			"fsts	fpul, fr4\n\t"
-			"fsts	fpul, fr5\n\t"
-			"fsts	fpul, fr6\n\t"
-			"fsts	fpul, fr7\n\t"
-			"fsts	fpul, fr8\n\t"
-			"fsts	fpul, fr9\n\t"
-			"fsts	fpul, fr10\n\t"
-			"fsts	fpul, fr11\n\t"
-			"fsts	fpul, fr12\n\t"
-			"fsts	fpul, fr13\n\t"
-			"fsts	fpul, fr14\n\t"
-			"fsts	fpul, fr15\n\t"
-			"frchg\n\t"
-			"fsts	fpul, fr0\n\t"
-			"fsts	fpul, fr1\n\t"
-			"fsts	fpul, fr2\n\t"
-			"fsts	fpul, fr3\n\t"
-			"fsts	fpul, fr4\n\t"
-			"fsts	fpul, fr5\n\t"
-			"fsts	fpul, fr6\n\t"
-			"fsts	fpul, fr7\n\t"
-			"fsts	fpul, fr8\n\t"
-			"fsts	fpul, fr9\n\t"
-			"fsts	fpul, fr10\n\t"
-			"fsts	fpul, fr11\n\t"
-			"fsts	fpul, fr12\n\t"
-			"fsts	fpul, fr13\n\t"
-			"fsts	fpul, fr14\n\t"
-			"fsts	fpul, fr15\n\t"
-			"frchg\n\t"
-			"lds	%2, fpscr\n\t"
-			:	/* no output */
-			:"r" (0), "r"(FPSCR_RCHG), "r"(FPSCR_INIT));
-	disable_fpu();
-}
-
 /**
  *      denormal_to_double - Given denormalized float number,
  *                           store double float
@@ -282,9 +231,9 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 		/* fcnvsd */
 		struct task_struct *tsk = current;
 
-		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR))
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR))
 			/* FPU error */
-			denormal_to_double(&tsk->thread.fpu.hard,
+			denormal_to_double(&tsk->thread.xstate->hardfpu,
 					   (finsn >> 8) & 0xf);
 		else
 			return 0;
@@ -300,9 +249,9 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 		n = (finsn >> 8) & 0xf;
 		m = (finsn >> 4) & 0xf;
-		hx = tsk->thread.fpu.hard.fp_regs[n];
-		hy = tsk->thread.fpu.hard.fp_regs[m];
-		fpscr = tsk->thread.fpu.hard.fpscr;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
 		prec = fpscr & FPSCR_DBL_PRECISION;
 
 		if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -312,18 +261,18 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 			/* FPU error because of denormal (doubles) */
 			llx = ((long long)hx << 32)
-			    | tsk->thread.fpu.hard.fp_regs[n + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
 			lly = ((long long)hy << 32)
-			    | tsk->thread.fpu.hard.fp_regs[m + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
 			llx = float64_mul(llx, lly);
-			tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
-			tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
 		} else if ((fpscr & FPSCR_CAUSE_ERROR)
 			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
 					 || (hy & 0x7fffffff) < 0x00800000))) {
 			/* FPU error because of denormal (floats) */
 			hx = float32_mul(hx, hy);
-			tsk->thread.fpu.hard.fp_regs[n] = hx;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
 		} else
 			return 0;
 
@@ -338,9 +287,9 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 		n = (finsn >> 8) & 0xf;
 		m = (finsn >> 4) & 0xf;
-		hx = tsk->thread.fpu.hard.fp_regs[n];
-		hy = tsk->thread.fpu.hard.fp_regs[m];
-		fpscr = tsk->thread.fpu.hard.fpscr;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
 		prec = fpscr & FPSCR_DBL_PRECISION;
 
 		if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -350,15 +299,15 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 			/* FPU error because of denormal (doubles) */
 			llx = ((long long)hx << 32)
-			    | tsk->thread.fpu.hard.fp_regs[n + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
 			lly = ((long long)hy << 32)
-			    | tsk->thread.fpu.hard.fp_regs[m + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
 			if ((finsn & 0xf00f) == 0xf000)
 				llx = float64_add(llx, lly);
 			else
 				llx = float64_sub(llx, lly);
-			tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
-			tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
 		} else if ((fpscr & FPSCR_CAUSE_ERROR)
 			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
 					 || (hy & 0x7fffffff) < 0x00800000))) {
@@ -367,7 +316,7 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 				hx = float32_add(hx, hy);
 			else
 				hx = float32_sub(hx, hy);
-			tsk->thread.fpu.hard.fp_regs[n] = hx;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
 		} else
 			return 0;
 
@@ -382,9 +331,9 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 		n = (finsn >> 8) & 0xf;
 		m = (finsn >> 4) & 0xf;
-		hx = tsk->thread.fpu.hard.fp_regs[n];
-		hy = tsk->thread.fpu.hard.fp_regs[m];
-		fpscr = tsk->thread.fpu.hard.fpscr;
+		hx = tsk->thread.xstate->hardfpu.fp_regs[n];
+		hy = tsk->thread.xstate->hardfpu.fp_regs[m];
+		fpscr = tsk->thread.xstate->hardfpu.fpscr;
 		prec = fpscr & FPSCR_DBL_PRECISION;
 
 		if ((fpscr & FPSCR_CAUSE_ERROR)
@@ -394,20 +343,20 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 
 			/* FPU error because of denormal (doubles) */
 			llx = ((long long)hx << 32)
-			    | tsk->thread.fpu.hard.fp_regs[n + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[n + 1];
 			lly = ((long long)hy << 32)
-			    | tsk->thread.fpu.hard.fp_regs[m + 1];
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
 
 			llx = float64_div(llx, lly);
 
-			tsk->thread.fpu.hard.fp_regs[n] = llx >> 32;
-			tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = llx >> 32;
+			tsk->thread.xstate->hardfpu.fp_regs[n + 1] = llx & 0xffffffff;
 		} else if ((fpscr & FPSCR_CAUSE_ERROR)
 			   && (!prec && ((hx & 0x7fffffff) < 0x00800000
 					 || (hy & 0x7fffffff) < 0x00800000))) {
 			/* FPU error because of denormal (floats) */
 			hx = float32_div(hx, hy);
-			tsk->thread.fpu.hard.fp_regs[n] = hx;
+			tsk->thread.xstate->hardfpu.fp_regs[n] = hx;
 		} else
 			return 0;
 
@@ -420,17 +369,17 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 		unsigned int hx;
 
 		m = (finsn >> 8) & 0x7;
-		hx = tsk->thread.fpu.hard.fp_regs[m];
+		hx = tsk->thread.xstate->hardfpu.fp_regs[m];
 
-		if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)
+		if ((tsk->thread.xstate->hardfpu.fpscr & FPSCR_CAUSE_ERROR)
 			&& ((hx & 0x7fffffff) < 0x00100000)) {
 			/* subnormal double to float conversion */
 			long long llx;
 
-			llx = ((long long)tsk->thread.fpu.hard.fp_regs[m] << 32)
-			    | tsk->thread.fpu.hard.fp_regs[m + 1];
+			llx = ((long long)tsk->thread.xstate->hardfpu.fp_regs[m] << 32)
+			    | tsk->thread.xstate->hardfpu.fp_regs[m + 1];
 
-			tsk->thread.fpu.hard.fpul = float64_to_float32(llx);
+			tsk->thread.xstate->hardfpu.fpul = float64_to_float32(llx);
 		} else
 			return 0;
 
@@ -449,7 +398,7 @@ void float_raise(unsigned int flags)
 int float_rounding_mode(void)
 {
 	struct task_struct *tsk = current;
-	int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.fpu.hard.fpscr);
+	int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.xstate->hardfpu.fpscr);
 	return roundingMode;
 }
 
@@ -461,16 +410,16 @@ BUILD_TRAP_HANDLER(fpu_error)
 	__unlazy_fpu(tsk, regs);
 	fpu_exception_flags = 0;
 	if (ieee_fpe_handler(regs)) {
-		tsk->thread.fpu.hard.fpscr &=
+		tsk->thread.xstate->hardfpu.fpscr &=
 		    ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
-		tsk->thread.fpu.hard.fpscr |= fpu_exception_flags;
+		tsk->thread.xstate->hardfpu.fpscr |= fpu_exception_flags;
 		/* Set the FPSCR flag as well as cause bits - simply
 		 * replicate the cause */
-		tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10);
+		tsk->thread.xstate->hardfpu.fpscr |= (fpu_exception_flags >> 10);
 		grab_fpu(regs);
 		restore_fpu(tsk);
 		task_thread_info(tsk)->status |= TS_USEDFPU;
-		if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) &
+		if ((((tsk->thread.xstate->hardfpu.fpscr & FPSCR_ENABLE_MASK) >> 7) &
 		     (fpu_exception_flags >> 2)) == 0) {
 			return;
 		}
@@ -478,33 +427,3 @@ BUILD_TRAP_HANDLER(fpu_error)
 
 	force_sig(SIGFPE, tsk);
 }
-
-void fpu_state_restore(struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-
-	grab_fpu(regs);
-	if (unlikely(!user_mode(regs))) {
-		printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
-		BUG();
-		return;
-	}
-
-	if (likely(used_math())) {
-		/* Using the FPU again.  */
-		restore_fpu(tsk);
-	} else {
-		/* First time FPU user.  */
-		fpu_init();
-		set_used_math();
-	}
-	task_thread_info(tsk)->status |= TS_USEDFPU;
-	tsk->fpu_counter++;
-}
-
-BUILD_TRAP_HANDLER(fpu_state_restore)
-{
-	TRAP_HANDLER_DECL;
-
-	fpu_state_restore(regs);
-}
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index d36f0c4..d180f16 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -15,7 +15,7 @@
 #include <asm/processor.h>
 #include <asm/cache.h>
 
-int __init detect_cpu_and_cache_system(void)
+void __cpuinit cpu_probe(void)
 {
 	unsigned long pvr, prr, cvr;
 	unsigned long size;
@@ -28,9 +28,9 @@ int __init detect_cpu_and_cache_system(void)
 		[9] = (1 << 16)
 	};
 
-	pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff;
-	prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
-	cvr = (ctrl_inl(CCN_CVR));
+	pvr = (__raw_readl(CCN_PVR) >> 8) & 0xffffff;
+	prr = (__raw_readl(CCN_PRR) >> 4) & 0xff;
+	cvr = (__raw_readl(CCN_CVR));
 
 	/*
 	 * Setup some sane SH-4 defaults for the icache
@@ -71,11 +71,11 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.dcache.ways = 4;
 	} else {
 		/* And some SH-4 defaults.. */
-		boot_cpu_data.flags |= CPU_HAS_PTEA;
+		boot_cpu_data.flags |= CPU_HAS_PTEA | CPU_HAS_FPU;
 		boot_cpu_data.family = CPU_FAMILY_SH4;
 	}
 
-	/* FPU detection works for everyone */
+	/* FPU detection works for almost everyone */
 	if ((cvr & 0x20000000))
 		boot_cpu_data.flags |= CPU_HAS_FPU;
 
@@ -124,6 +124,7 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.type = CPU_SH7785;
 		break;
 	case 0x4004:
+	case 0x4005:
 		boot_cpu_data.type = CPU_SH7786;
 		boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
 		break;
@@ -160,6 +161,7 @@ int __init detect_cpu_and_cache_system(void)
 		break;
 	case 0x700:
 		boot_cpu_data.type = CPU_SH4_501;
+		boot_cpu_data.flags &= ~CPU_HAS_FPU;
 		boot_cpu_data.icache.ways = 2;
 		boot_cpu_data.dcache.ways = 2;
 		break;
@@ -227,7 +229,7 @@ int __init detect_cpu_and_cache_system(void)
 			 * Size calculation is much more sensible
 			 * than it is for the L1.
 			 *
-			 * Sizes are 128KB, 258KB, 512KB, and 1MB.
+			 * Sizes are 128KB, 256KB, 512KB, and 1MB.
 			 */
 			size = (cvr & 0xf) << 17;
 
@@ -249,6 +251,4 @@ int __init detect_cpu_and_cache_system(void)
 				 boot_cpu_data.scache.linesz);
 		}
 	}
-
-	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 4b73371..e916b18 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -31,16 +31,13 @@ static struct platform_device scif0_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -62,16 +59,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -93,15 +87,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -198,7 +189,7 @@ void __init plat_irq_setup_pins(int mode)
 {
 	switch (mode) {
 	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
-		ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 		register_intc_controller(&intc_desc_irlm);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index b2a9df1..911d196 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -66,16 +66,13 @@ static struct platform_device scif1_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -97,16 +94,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -128,15 +122,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -163,15 +154,12 @@ static struct platform_device tmu2_device = {
 	defined(CONFIG_CPU_SUBTYPE_SH7751R)
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xfe100008,
 		.end	= 0xfe100013,
 		.flags	= IORESOURCE_MEM,
@@ -193,15 +181,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xfe100014,
 		.end	= 0xfe10001f,
 		.flags	= IORESOURCE_MEM,
@@ -442,7 +427,7 @@ void __init plat_irq_setup_pins(int mode)
 
 	switch (mode) {
 	case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
-		ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 		register_intc_controller(&intc_desc_irlm);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b74cc0..48ea8fe 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -187,16 +187,13 @@ static struct platform_device scif3_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -218,16 +215,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -249,15 +243,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -319,7 +310,7 @@ void __init plat_irq_setup_pins(int mode)
 {
 	switch (mode) {
 	case IRQ_MODE_IRQ:
-		ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+		__raw_writew(__raw_readw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
 		register_intc_controller(&intc_desc_irq);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 8a8a993..14726ee 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -43,9 +43,9 @@ static unsigned long *sq_bitmap;
 
 #define store_queue_barrier()			\
 do {						\
-	(void)ctrl_inl(P4SEG_STORE_QUE);	\
-	ctrl_outl(0, P4SEG_STORE_QUE + 0);	\
-	ctrl_outl(0, P4SEG_STORE_QUE + 8);	\
+	(void)__raw_readl(P4SEG_STORE_QUE);	\
+	__raw_writel(0, P4SEG_STORE_QUE + 0);	\
+	__raw_writel(0, P4SEG_STORE_QUE + 8);	\
 } while (0);
 
 /**
@@ -100,7 +100,7 @@ static inline void sq_mapping_list_del(struct sq_mapping *map)
 	spin_unlock_irq(&sq_mapping_lock);
 }
 
-static int __sq_remap(struct sq_mapping *map, unsigned long flags)
+static int __sq_remap(struct sq_mapping *map, pgprot_t prot)
 {
 #if defined(CONFIG_MMU)
 	struct vm_struct *vma;
@@ -113,7 +113,7 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags)
 
 	if (ioremap_page_range((unsigned long)vma->addr,
 			       (unsigned long)vma->addr + map->size,
-			       vma->phys_addr, __pgprot(flags))) {
+			       vma->phys_addr, prot)) {
 		vunmap(vma->addr);
 		return -EAGAIN;
 	}
@@ -123,8 +123,8 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags)
 	 * straightforward, as we can just load up each queue's QACR with
 	 * the physical address appropriately masked.
 	 */
-	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
-	ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
+	__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
+	__raw_writel(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
 #endif
 
 	return 0;
@@ -135,14 +135,14 @@ static int __sq_remap(struct sq_mapping *map, unsigned long flags)
  * @phys: Physical address of mapping.
  * @size: Length of mapping.
  * @name: User invoking mapping.
- * @flags: Protection flags.
+ * @prot: Protection bits.
  *
  * Remaps the physical address @phys through the next available store queue
  * address of @size length. @name is logged at boot time as well as through
  * the sysfs interface.
  */
 unsigned long sq_remap(unsigned long phys, unsigned int size,
-		       const char *name, unsigned long flags)
+		       const char *name, pgprot_t prot)
 {
 	struct sq_mapping *map;
 	unsigned long end;
@@ -177,7 +177,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size,
 
 	map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
 
-	ret = __sq_remap(map, pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
+	ret = __sq_remap(map, prot);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -309,8 +309,7 @@ static ssize_t mapping_store(const char *buf, size_t count)
 		return -EIO;
 
 	if (likely(len)) {
-		int ret = sq_remap(base, len, "Userspace",
-				   pgprot_val(PAGE_SHARED));
+		int ret = sq_remap(base, len, "Userspace", PAGE_SHARED);
 		if (ret < 0)
 			return ret;
 	} else
@@ -327,7 +326,7 @@ static struct attribute *sq_sysfs_attrs[] = {
 	NULL,
 };
 
-static struct sysfs_ops sq_sysfs_ops = {
+static const struct sysfs_ops sq_sysfs_ops = {
 	.show	= sq_sysfs_show,
 	.store	= sq_sysfs_store,
 };
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 33bab47..b144e8a 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -41,7 +41,8 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7757)	:= pinmux-sh7757.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
-obj-y				+= $(clock-y)
-obj-$(CONFIG_SMP)		+= $(smp-y)
-obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
-obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
+obj-y					+= $(clock-y)
+obj-$(CONFIG_SMP)			+= $(smp-y)
+obj-$(CONFIG_GENERIC_GPIO)		+= $(pinmux-y)
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= ubc.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 0ee3ee8..71291ae 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7343 registers */
@@ -36,8 +37,6 @@
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
 static struct clk r_clk = {
-	.name           = "rclk",
-	.id             = -1,
 	.rate           = 32768,
 };
 
@@ -46,8 +45,6 @@ static struct clk r_clk = {
  * from the platform code.
  */
 struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -69,8 +66,6 @@ static struct clk_ops dll_clk_ops = {
 };
 
 static struct clk dll_clk = {
-	.name           = "dll_clk",
-	.id             = -1,
 	.ops		= &dll_clk_ops,
 	.parent		= &r_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -91,8 +86,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -107,82 +100,182 @@ struct clk *main_clks[] = {
 static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
 static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = divisors,
 	.nr_divisors = ARRAY_SIZE(divisors),
 	.multipliers = multipliers,
 	.nr_multipliers = ARRAY_SIZE(multipliers),
 };
 
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
 enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
        DIV4_SIUA, DIV4_SIUB, DIV4_NR };
 
-#define DIV4(_str, _reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
-	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
-	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
 };
 
-struct clk div6_clks[] = {
-	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
+       MSTP007, MSTP006, MSTP005, MSTP004, MSTP003, MSTP002, MSTP001,
+       MSTP109, MSTP108, MSTP100,
+       MSTP225, MSTP224, MSTP218, MSTP217, MSTP216,
+       MSTP214, MSTP213, MSTP212, MSTP211, MSTP208,
+       MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[MSTP028] = MSTP(&div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	[MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
+	[MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
+	[MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	[MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	[MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP004] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP003] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	[MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+	[MSTP108] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 8, 0),
+
+	[MSTP225] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 25, 0),
+	[MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	[MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	[MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	[MSTP216] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 16, 0),
+	[MSTP214] = MSTP(&r_clk, MSTPCR2, 14, 0),
+	[MSTP213] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 13, 0),
+	[MSTP212] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 12, 0),
+	[MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	[MSTP208] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 8, 0),
+	[MSTP206] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
+	[MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	[MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	[MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	[MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	[MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[] = {
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
-	MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
-	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
-	MSTP("intc3", &div4_clks[DIV4_P], MSTPCR0, 23, 0),
-	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 0),
-	MSTP("dmac0", &div4_clks[DIV4_P], MSTPCR0, 21, 0),
-	MSTP("sh0", &div4_clks[DIV4_P], MSTPCR0, 20, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0),
-	MSTP("ubc0", &div4_clks[DIV4_P], MSTPCR0, 17, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
-	MSTP("mfi0", &div4_clks[DIV4_P], MSTPCR0, 11, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
-	MSTP("scif3", &div4_clks[DIV4_P], MSTPCR0, 4, 0),
-	MSTP("sio0", &div4_clks[DIV4_P], MSTPCR0, 3, 0),
-	MSTP("siof0", &div4_clks[DIV4_P], MSTPCR0, 2, 0),
-	MSTP("siof1", &div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
-	MSTP("i2c1", &div4_clks[DIV4_P], MSTPCR1, 8, 0),
-
-	MSTP("tpu0", &div4_clks[DIV4_P], MSTPCR2, 25, 0),
-	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0),
-	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
-	MSTP("mmcif0", &div4_clks[DIV4_P], MSTPCR2, 17, 0),
-	MSTP("sim0", &div4_clks[DIV4_P], MSTPCR2, 16, 0),
-	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0),
-	MSTP("tsif0", &div4_clks[DIV4_P], MSTPCR2, 13, 0),
-	MSTP("s3d40", &div4_clks[DIV4_P], MSTPCR2, 12, 0),
-	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0),
-	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP32 clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
+	CLKDEV_CON_ID("uram0", &mstp_clks[MSTP028]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
+	CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP014]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
+	{
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP007],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP006],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP005],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP004],
+	},
+	CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
+	CLKDEV_CON_ID("i2c0", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("i2c1", &mstp_clks[MSTP108]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
+	CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
+	CLKDEV_CON_ID("sim0", &mstp_clks[MSTP216]),
+	CLKDEV_CON_ID("keysc0", &mstp_clks[MSTP214]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP213]),
+	CLKDEV_CON_ID("s3d40", &mstp_clks[MSTP212]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
+	CLKDEV_CON_ID("siu0", &mstp_clks[MSTP208]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[MSTP206]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
 };
 
 int __init arch_clk_init(void)
@@ -198,14 +291,16 @@ int __init arch_clk_init(void)
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index a95ebab..7ce5bbc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7366 registers */
@@ -36,8 +37,6 @@
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
 static struct clk r_clk = {
-	.name           = "rclk",
-	.id             = -1,
 	.rate           = 32768,
 };
 
@@ -46,8 +45,6 @@ static struct clk r_clk = {
  * from the platform code.
  */
 struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -69,8 +66,6 @@ static struct clk_ops dll_clk_ops = {
 };
 
 static struct clk dll_clk = {
-	.name           = "dll_clk",
-	.id             = -1,
 	.ops		= &dll_clk_ops,
 	.parent		= &r_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -94,8 +89,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -110,79 +103,168 @@ struct clk *main_clks[] = {
 static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
 static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = divisors,
 	.nr_divisors = ARRAY_SIZE(divisors),
 	.multipliers = multipliers,
 	.nr_multipliers = ARRAY_SIZE(multipliers),
 };
 
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
 enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
        DIV4_SIUA, DIV4_SIUB, DIV4_NR };
 
-#define DIV4(_str, _reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
-	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
-	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
-	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
 };
 
-struct clk div6_clks[] = {
-	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+enum { MSTP031, MSTP030, MSTP029, MSTP028, MSTP026,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP019, MSTP018, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP013, MSTP012, MSTP011, MSTP010,
+       MSTP007, MSTP006, MSTP005, MSTP002, MSTP001,
+       MSTP109, MSTP100,
+       MSTP227, MSTP226, MSTP224, MSTP223, MSTP222, MSTP218, MSTP217,
+       MSTP211, MSTP207, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP_NR };
 
-static struct clk mstp_clks[] = {
+static struct clk mstp_clks[MSTP_NR] = {
 	/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
-	MSTP("rsmem0", &div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
-	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
-	MSTP("intc3", &div4_clks[DIV4_P], MSTPCR0, 23, 0),
-	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 0),
-	MSTP("dmac0", &div4_clks[DIV4_P], MSTPCR0, 21, 0),
-	MSTP("sh0", &div4_clks[DIV4_P], MSTPCR0, 20, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0),
-	MSTP("ubc0", &div4_clks[DIV4_P], MSTPCR0, 17, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
-	MSTP("mfi0", &div4_clks[DIV4_P], MSTPCR0, 11, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
-	MSTP("msiof0", &div4_clks[DIV4_P], MSTPCR0, 2, 0),
-	MSTP("sbr0", &div4_clks[DIV4_P], MSTPCR0, 1, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
-
-	MSTP("icb0", &div4_clks[DIV4_P], MSTPCR2, 27, 0),
-	MSTP("meram0", &div4_clks[DIV4_P], MSTPCR2, 26, 0),
-	MSTP("dacy1", &div4_clks[DIV4_P], MSTPCR2, 24, 0),
-	MSTP("dacy0", &div4_clks[DIV4_P], MSTPCR2, 23, 0),
-	MSTP("tsif0", &div4_clks[DIV4_P], MSTPCR2, 22, 0),
-	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
-	MSTP("mmcif0", &div4_clks[DIV4_P], MSTPCR2, 17, 0),
-	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 9, 0),
-	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+	[MSTP031] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 31, CLK_ENABLE_ON_INIT),
+	[MSTP030] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 30, CLK_ENABLE_ON_INIT),
+	[MSTP029] = MSTP(&div4_clks[DIV4_I], MSTPCR0, 29, CLK_ENABLE_ON_INIT),
+	[MSTP028] = MSTP(&div4_clks[DIV4_SH], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
+	[MSTP026] = MSTP(&div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
+	[MSTP023] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP019] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 19, 0),
+	[MSTP017] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP015] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = MSTP(&r_clk, MSTPCR0, 14, 0),
+	[MSTP013] = MSTP(&r_clk, MSTPCR0, 13, 0),
+	[MSTP011] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP007] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 7, 0),
+	[MSTP006] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 6, 0),
+	[MSTP005] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP002] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = MSTP(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+
+	[MSTP109] = MSTP(&div4_clks[DIV4_P], MSTPCR1, 9, 0),
+
+	[MSTP227] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 27, 0),
+	[MSTP226] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 26, 0),
+	[MSTP224] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 24, 0),
+	[MSTP223] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 23, 0),
+	[MSTP222] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 22, 0),
+	[MSTP218] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 18, 0),
+	[MSTP217] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 17, 0),
+	[MSTP211] = MSTP(&div4_clks[DIV4_P], MSTPCR2, 11, 0),
+	[MSTP207] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 7, CLK_ENABLE_ON_INIT),
+	[MSTP205] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 5, 0),
+	[MSTP204] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 4, 0),
+	[MSTP203] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 3, 0),
+	[MSTP202] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
+	[MSTP201] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
+	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("siua_clk", &div4_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP32 clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[MSTP031]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[MSTP030]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[MSTP029]),
+	CLKDEV_CON_ID("rsmem0", &mstp_clks[MSTP028]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[MSTP026]),
+	CLKDEV_CON_ID("intc3", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]),
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP014]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
+	{
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP007],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP006],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP005],
+	},
+	CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
+	CLKDEV_CON_ID("i2c0", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
+	CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
+	CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),
+	CLKDEV_CON_ID("dacy0", &mstp_clks[MSTP223]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[MSTP222]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),
+	CLKDEV_CON_ID("mmcif0", &mstp_clks[MSTP217]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[MSTP211]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[MSTP207]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[MSTP205]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[MSTP204]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[MSTP203]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[MSTP202]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[MSTP201]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[MSTP200]),
 };
 
 int __init arch_clk_init(void)
@@ -198,14 +280,16 @@ int __init arch_clk_init(void)
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index ea38b55..2030f3d 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7722.h>
@@ -36,8 +37,6 @@
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
 static struct clk r_clk = {
-	.name           = "rclk",
-	.id             = -1,
 	.rate           = 32768,
 };
 
@@ -46,8 +45,6 @@ static struct clk r_clk = {
  * from the platform code.
  */
 struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -69,8 +66,6 @@ static struct clk_ops dll_clk_ops = {
 };
 
 static struct clk dll_clk = {
-	.name           = "dll_clk",
-	.id             = -1,
 	.ops		= &dll_clk_ops,
 	.parent		= &r_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -94,8 +89,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -110,66 +103,153 @@ struct clk *main_clks[] = {
 static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
 static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = divisors,
 	.nr_divisors = ARRAY_SIZE(divisors),
 	.multipliers = multipliers,
 	.nr_multipliers = ARRAY_SIZE(multipliers),
 };
 
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
-       DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
 
-#define DIV4(_str, _reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
-	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
-	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0),
-	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0),
-	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0),
-	[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x1fff, 0),
+	[DIV4_I] = DIV4(FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
+	[DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x1fff, 0),
+};
+
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x1fff, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x1fff, 0),
+};
+
+enum { DIV6_V, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
 };
 
-struct clk div6_clks[] = {
-	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+static struct clk mstp_clks[HWBLK_NR] = {
+	SH_HWBLK_CLK(HWBLK_URAM, &div4_clks[DIV4_U], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_XYMEM, &div4_clks[DIV4_B], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_TMU, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_CMT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_RWDT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_FLCTL, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF1, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF2, &div4_clks[DIV4_P], 0),
+
+	SH_HWBLK_CLK(HWBLK_IIC, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_RTC, &r_clk, 0),
+
+	SH_HWBLK_CLK(HWBLK_SDHI, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_KEYSC, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_USBF, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_2DG, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SIU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VOU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_JPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_BEU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_CEU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VEU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_P], 0),
 };
 
-#define R_CLK &r_clk
-#define P_CLK &div4_clks[DIV4_P]
-#define B_CLK &div4_clks[DIV4_B]
-#define U_CLK &div4_clks[DIV4_U]
-
-static struct clk mstp_clks[] = {
-	SH_HWBLK_CLK("uram0", -1, U_CLK, HWBLK_URAM, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("xymem0", -1, B_CLK, HWBLK_XYMEM, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU, 0),
-	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
-	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
-	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
-	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
-	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
-	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
-
-	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
-	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
-
-	SH_HWBLK_CLK("sdhi0", -1, P_CLK, HWBLK_SDHI, 0),
-	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
-	SH_HWBLK_CLK("usbf0", -1, P_CLK, HWBLK_USBF, 0),
-	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
-	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
-	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
-	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
-	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
-	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, 0),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
-	SH_HWBLK_CLK("lcdc0", -1, P_CLK, HWBLK_LCDC, 0),
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
+	CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
+	CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU],
+	},
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
+	{
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF0],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF1],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF2],
+	},
+	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[HWBLK_SDHI]),
+	CLKDEV_CON_ID("keysc0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("usbf0", &mstp_clks[HWBLK_USBF]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_CON_ID("siu0", &mstp_clks[HWBLK_SIU]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[HWBLK_CEU]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[HWBLK_LCDC]),
 };
 
 int __init arch_clk_init(void)
@@ -185,14 +265,24 @@ int __init arch_clk_init(void)
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+		ret = sh_clk_div4_enable_register(div4_enable_clks,
+					DIV4_ENABLE_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+					DIV4_REPARENT_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index 20a31c2..d3938f0 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -21,6 +21,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7723.h>
@@ -36,8 +38,6 @@
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
 static struct clk r_clk = {
-	.name           = "rclk",
-	.id             = -1,
 	.rate           = 32768,
 };
 
@@ -46,8 +46,6 @@ static struct clk r_clk = {
  * from the platform code.
  */
 struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -69,8 +67,6 @@ static struct clk_ops dll_clk_ops = {
 };
 
 static struct clk dll_clk = {
-	.name           = "dll_clk",
-	.id             = -1,
 	.ops		= &dll_clk_ops,
 	.parent		= &r_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -94,8 +90,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -110,93 +104,228 @@ struct clk *main_clks[] = {
 static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
 static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = divisors,
 	.nr_divisors = ARRAY_SIZE(divisors),
 	.multipliers = multipliers,
 	.nr_multipliers = ARRAY_SIZE(multipliers),
 };
 
-enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P,
-       DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR };
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, DIV4_NR };
 
-#define DIV4(_str, _reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
-	[DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
-	[DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
-	[DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x0dbf, 0),
-	[DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x0dbf, 0),
-	[DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x0dbf, 0),
-	[DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x0dbf, 0),
+	[DIV4_I] = DIV4(FRQCR, 20, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(FRQCR, 16, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCR, 12, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCR, 8, 0x0dbf, CLK_ENABLE_ON_INIT),
+	[DIV4_B3] = DIV4(FRQCR, 4, 0x0db4, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCR, 0, 0x0dbf, 0),
+};
+
+enum { DIV4_IRDA, DIV4_ENABLE_NR };
+
+struct clk div4_enable_clks[DIV4_ENABLE_NR] = {
+	[DIV4_IRDA] = DIV4(IRDACLKCR, 0, 0x0dbf, 0),
 };
 
-struct clk div6_clks[] = {
-	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
+enum { DIV4_SIUA, DIV4_SIUB, DIV4_REPARENT_NR };
+
+struct clk div4_reparent_clks[DIV4_REPARENT_NR] = {
+	[DIV4_SIUA] = DIV4(SCLKACR, 0, 0x0dbf, 0),
+	[DIV4_SIUB] = DIV4(SCLKBCR, 0, 0x0dbf, 0),
 };
+enum { DIV6_V, DIV6_NR };
 
-#define R_CLK (&r_clk)
-#define P_CLK (&div4_clks[DIV4_P])
-#define B_CLK (&div4_clks[DIV4_B])
-#define U_CLK (&div4_clks[DIV4_U])
-#define I_CLK (&div4_clks[DIV4_I])
-#define SH_CLK (&div4_clks[DIV4_SH])
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&pll_clk, VCLKCR, 0),
+};
 
 static struct clk mstp_clks[] = {
 	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
-	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("intc0", -1, I_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
-	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
-	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
-	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
-	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
-	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
-	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
-	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
-	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
-	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
-	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
-	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
-	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
-	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
-	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
-	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
-	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
-	SH_HWBLK_CLK("meram0", -1, SH_CLK, HWBLK_MERAM, 0),
-
-	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
-	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
-
-	SH_HWBLK_CLK("atapi0", -1, SH_CLK, HWBLK_ATAPI, 0),
-	SH_HWBLK_CLK("adc0", -1, P_CLK, HWBLK_ADC, 0),
-	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
-	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
-	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
-	SH_HWBLK_CLK("icb0", -1, B_CLK, HWBLK_ICB, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
-	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
-	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
-	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB, 0),
-	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
-	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
-	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, 0),
-	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
-	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
-	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, 0),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
-	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
+	SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_OC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_L2C, &div4_clks[DIV4_SH], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_ILMEM, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_FPU, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_INTC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_DMAC0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SHYWAY, &div4_clks[DIV4_SH], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_HUDI, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_UBC, &div4_clks[DIV4_I], 0),
+	SH_HWBLK_CLK(HWBLK_TMU0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_CMT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_RWDT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_DMAC1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_TMU1, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_FLCTL, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF1, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF2, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF3, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF4, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF5, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_MSIOF0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_MSIOF1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_MERAM, &div4_clks[DIV4_SH], 0),
+
+	SH_HWBLK_CLK(HWBLK_IIC, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_RTC, &r_clk, 0),
+
+	SH_HWBLK_CLK(HWBLK_ATAPI, &div4_clks[DIV4_SH], 0),
+	SH_HWBLK_CLK(HWBLK_ADC, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_TPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_IRDA, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_TSIF, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_ICB, &div4_clks[DIV4_B], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_SDHI0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SDHI1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_KEYSC, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_USB, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_2DG, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SIU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VEU2H1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VOU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_BEU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_CEU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VEU2H0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_B], 0),
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("dll_clk", &dll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("b3_clk", &div4_clks[DIV4_B3]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("irda_clk", &div4_enable_clks[DIV4_IRDA]),
+	CLKDEV_CON_ID("siua_clk", &div4_reparent_clks[DIV4_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div4_reparent_clks[DIV4_SIUB]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
+	CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
+	CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
+	CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[HWBLK_DMAC0]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	},
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_CON_ID("dmac1", &mstp_clks[HWBLK_DMAC1]),
+	{
+		/* TMU3 */
+		.dev_id		= "sh_tmu.3",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	}, {
+		/* TMU4 */
+		.dev_id		= "sh_tmu.4",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	}, {
+		/* TMU5 */
+		.dev_id		= "sh_tmu.5",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	},
+	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
+	{
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF0],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF1],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF2],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF3],
+	}, {
+		/* SCIF4 */
+		.dev_id		= "sh-sci.4",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF4],
+	}, {
+		/* SCIF5 */
+		.dev_id		= "sh-sci.5",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF5],
+	},
+	CLKDEV_CON_ID("msiof0", &mstp_clks[HWBLK_MSIOF0]),
+	CLKDEV_CON_ID("msiof1", &mstp_clks[HWBLK_MSIOF1]),
+	CLKDEV_CON_ID("meram0", &mstp_clks[HWBLK_MERAM]),
+	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
+	CLKDEV_CON_ID("icb0", &mstp_clks[HWBLK_ICB]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[HWBLK_SDHI0]),
+	CLKDEV_CON_ID("sdhi1", &mstp_clks[HWBLK_SDHI1]),
+	CLKDEV_CON_ID("keysc0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_CON_ID("siu0", &mstp_clks[HWBLK_SIU]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[HWBLK_CEU]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[HWBLK_LCDC]),
 };
 
 int __init arch_clk_init(void)
@@ -210,16 +339,26 @@ int __init arch_clk_init(void)
 		pll_clk.parent = &extal_clk;
 
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
+		ret |= clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+		ret = sh_clk_div4_enable_register(div4_enable_clks,
+					DIV4_ENABLE_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div4_reparent_register(div4_reparent_clks,
+					DIV4_REPARENT_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 9db7438..2d9700c 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -21,6 +21,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7724.h>
@@ -39,8 +41,6 @@
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
 static struct clk r_clk = {
-	.name           = "rclk",
-	.id             = -1,
 	.rate           = 32768,
 };
 
@@ -49,8 +49,6 @@ static struct clk r_clk = {
  * from the platform code.
  */
 struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -74,8 +72,6 @@ static struct clk_ops fll_clk_ops = {
 };
 
 static struct clk fll_clk = {
-	.name           = "fll_clk",
-	.id             = -1,
 	.ops		= &fll_clk_ops,
 	.parent		= &r_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -96,8 +92,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.flags		= CLK_ENABLE_ON_INIT,
 };
@@ -113,8 +107,6 @@ static struct clk_ops div3_clk_ops = {
 };
 
 static struct clk div3_clk = {
-	.name		= "div3_clk",
-	.id		= -1,
 	.ops		= &div3_clk_ops,
 	.parent		= &pll_clk,
 };
@@ -127,95 +119,239 @@ struct clk *main_clks[] = {
 	&div3_clk,
 };
 
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRA to update hardware setting */
+	value = __raw_readl(FRQCRA);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRA);
+}
+
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = divisors,
 	.nr_divisors = ARRAY_SIZE(divisors),
 };
 
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
 enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_P, DIV4_M1, DIV4_NR };
 
-#define DIV4(_str, _reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags)
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4("cpu_clk", FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
-	[DIV4_P] = DIV4("peripheral_clk", FRQCRA, 0, 0x2f7c, 0),
-	[DIV4_M1] = DIV4("vpu_clk", FRQCRB, 4, 0x2f7c, 0),
+	[DIV4_I] = DIV4(FRQCRA, 20, 0x2f7d, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(FRQCRA, 12, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0x2f7c, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(FRQCRA, 0, 0x2f7c, 0),
+	[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
 };
 
-struct clk div6_clks[] = {
-	SH_CLK_DIV6("video_clk", &div3_clk, VCLKCR, 0),
-	SH_CLK_DIV6("fsia_clk", &div3_clk, FCLKACR, 0),
-	SH_CLK_DIV6("fsib_clk", &div3_clk, FCLKBCR, 0),
-	SH_CLK_DIV6("irda_clk", &div3_clk, IRDACLKCR, 0),
-	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
+enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+
+struct clk div6_clks[DIV6_NR] = {
+	[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
+	[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
+	[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
+	[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
+	[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
 };
 
-#define R_CLK (&r_clk)
-#define P_CLK (&div4_clks[DIV4_P])
-#define B_CLK (&div4_clks[DIV4_B])
-#define I_CLK (&div4_clks[DIV4_I])
-#define SH_CLK (&div4_clks[DIV4_SH])
-
-static struct clk mstp_clks[] = {
-	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("rs0", -1, B_CLK, HWBLK_RSMEM, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("intc0", -1, P_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
-	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
-	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
-	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
-	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
-	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
-	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
-	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
-	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
-	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
-	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
-	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
-	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
-	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
-	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
-	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
-
-	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
-	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
-	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC0, 0),
-	SH_HWBLK_CLK("i2c1", -1, P_CLK, HWBLK_IIC1, 0),
-
-	SH_HWBLK_CLK("mmc0", -1, B_CLK, HWBLK_MMC, 0),
-	SH_HWBLK_CLK("eth0", -1, B_CLK, HWBLK_ETHER, 0),
-	SH_HWBLK_CLK("atapi0", -1, B_CLK, HWBLK_ATAPI, 0),
-	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
-	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
-	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
-	SH_HWBLK_CLK("usb1", -1, B_CLK, HWBLK_USB1, 0),
-	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB0, 0),
-	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
-	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
-	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
-	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU1, 0),
-	SH_HWBLK_CLK("ceu1", -1, B_CLK, HWBLK_CEU1, 0),
-	SH_HWBLK_CLK("beu1", -1, B_CLK, HWBLK_BEU1, 0),
-	SH_HWBLK_CLK("2ddmac0", -1, SH_CLK, HWBLK_2DDMAC, 0),
-	SH_HWBLK_CLK("spu0", -1, B_CLK, HWBLK_SPU, 0),
-	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
-	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
-	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU0, 0),
-	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU0, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU0, 0),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
-	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
+static struct clk mstp_clks[HWBLK_NR] = {
+	SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_OC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_RSMEM, &div4_clks[DIV4_B], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_ILMEM, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_L2C, &div4_clks[DIV4_SH], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_FPU, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_INTC, &div4_clks[DIV4_P], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_DMAC0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SHYWAY, &div4_clks[DIV4_SH], CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK(HWBLK_HUDI, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_UBC, &div4_clks[DIV4_I], 0),
+	SH_HWBLK_CLK(HWBLK_TMU0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_CMT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_RWDT, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_DMAC1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_TMU1, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF1, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF2, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF3, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF4, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SCIF5, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_MSIOF0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_MSIOF1, &div4_clks[DIV4_B], 0),
+
+	SH_HWBLK_CLK(HWBLK_KEYSC, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_RTC, &r_clk, 0),
+	SH_HWBLK_CLK(HWBLK_IIC0, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_IIC1, &div4_clks[DIV4_P], 0),
+
+	SH_HWBLK_CLK(HWBLK_MMC, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_ETHER, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_ATAPI, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_TPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_IRDA, &div4_clks[DIV4_P], 0),
+	SH_HWBLK_CLK(HWBLK_TSIF, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_USB1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_USB0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_2DG, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SDHI0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_SDHI1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VEU1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_CEU1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_BEU1, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_2DDMAC, &div4_clks[DIV4_SH], 0),
+	SH_HWBLK_CLK(HWBLK_SPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_JPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VOU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_BEU0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_CEU0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VEU0, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_VPU, &div4_clks[DIV4_B], 0),
+	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_B], 0),
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("fll_clk", &fll_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("div3_clk", &div3_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("vpu_clk", &div4_clks[DIV4_M1]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
+	CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
+	CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+	CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
+
+	/* MSTP clocks */
+	CLKDEV_CON_ID("tlb0", &mstp_clks[HWBLK_TLB]),
+	CLKDEV_CON_ID("ic0", &mstp_clks[HWBLK_IC]),
+	CLKDEV_CON_ID("oc0", &mstp_clks[HWBLK_OC]),
+	CLKDEV_CON_ID("rs0", &mstp_clks[HWBLK_RSMEM]),
+	CLKDEV_CON_ID("ilmem0", &mstp_clks[HWBLK_ILMEM]),
+	CLKDEV_CON_ID("l2c0", &mstp_clks[HWBLK_L2C]),
+	CLKDEV_CON_ID("fpu0", &mstp_clks[HWBLK_FPU]),
+	CLKDEV_CON_ID("intc0", &mstp_clks[HWBLK_INTC]),
+	CLKDEV_CON_ID("dmac0", &mstp_clks[HWBLK_DMAC0]),
+	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
+	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
+	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU0],
+	}, {
+		/* TMU3 */
+		.dev_id		= "sh_tmu.3",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	},
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
+	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
+	CLKDEV_CON_ID("dmac1", &mstp_clks[HWBLK_DMAC1]),
+	{
+		/* TMU4 */
+		.dev_id		= "sh_tmu.4",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	}, {
+		/* TMU5 */
+		.dev_id		= "sh_tmu.5",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[HWBLK_TMU1],
+	}, {
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF0],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF1],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF2],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF3],
+	}, {
+		/* SCIF4 */
+		.dev_id		= "sh-sci.4",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF4],
+	}, {
+		/* SCIF5 */
+		.dev_id		= "sh-sci.5",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[HWBLK_SCIF5],
+	},
+	CLKDEV_CON_ID("msiof0", &mstp_clks[HWBLK_MSIOF0]),
+	CLKDEV_CON_ID("msiof1", &mstp_clks[HWBLK_MSIOF1]),
+	CLKDEV_CON_ID("keysc0", &mstp_clks[HWBLK_KEYSC]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
+	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC0]),
+	CLKDEV_CON_ID("i2c1", &mstp_clks[HWBLK_IIC1]),
+	CLKDEV_CON_ID("mmc0", &mstp_clks[HWBLK_MMC]),
+	CLKDEV_CON_ID("eth0", &mstp_clks[HWBLK_ETHER]),
+	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
+	CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
+	CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
+	CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
+	CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]),
+	CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[HWBLK_SDHI0]),
+	CLKDEV_CON_ID("sdhi1", &mstp_clks[HWBLK_SDHI1]),
+	CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU1]),
+	CLKDEV_CON_ID("ceu1", &mstp_clks[HWBLK_CEU1]),
+	CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
+	CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
+	CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+	CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
+	CLKDEV_CON_ID("vou0", &mstp_clks[HWBLK_VOU]),
+	CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
+	CLKDEV_CON_ID("ceu0", &mstp_clks[HWBLK_CEU0]),
+	CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU0]),
+	CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
+	CLKDEV_CON_ID("lcdc0", &mstp_clks[HWBLK_LCDC]),
 };
 
 int __init arch_clk_init(void)
@@ -231,14 +367,16 @@ int __init arch_clk_init(void)
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
 
 	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
-		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index ddc235c..0a752bd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -35,7 +36,7 @@ static struct clk_ops sh7757_master_clk_ops = {
 
 static void module_clk_recalc(struct clk *clk)
 {
-	int idx = ctrl_inl(FRQCR) & 0x0000000f;
+	int idx = __raw_readl(FRQCR) & 0x0000000f;
 	clk->rate = clk->parent->rate / p1fc_divisors[idx];
 }
 
@@ -45,7 +46,7 @@ static struct clk_ops sh7757_module_clk_ops = {
 
 static void bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQCR) >> 8) & 0x0000000f;
+	int idx = (__raw_readl(FRQCR) >> 8) & 0x0000000f;
 	clk->rate = clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -55,7 +56,7 @@ static struct clk_ops sh7757_bus_clk_ops = {
 
 static void cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x0000000f;
+	int idx = (__raw_readl(FRQCR) >> 20) & 0x0000000f;
 	clk->rate = clk->parent->rate / ifc_divisors[idx];
 }
 
@@ -78,7 +79,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 
 static void shyway_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQCR) >> 12) & 0x0000000f;
+	int idx = (__raw_readl(FRQCR) >> 12) & 0x0000000f;
 	clk->rate = clk->parent->rate / sfc_divisors[idx];
 }
 
@@ -87,7 +88,6 @@ static struct clk_ops sh7757_shyway_clk_ops = {
 };
 
 static struct clk sh7757_shyway_clk = {
-	.name		= "shyway_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7757_shyway_clk_ops,
 };
@@ -100,6 +100,13 @@ static struct clk *sh7757_onchip_clocks[] = {
 	&sh7757_shyway_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &sh7757_shyway_clk),
+};
+
 static int __init sh7757_clk_init(void)
 {
 	struct clk *clk = clk_get(NULL, "master_clk");
@@ -123,6 +130,8 @@ static int __init sh7757_clk_init(void)
 
 	clk_put(clk);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return 0;
 }
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 370cd47..1f1df48 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -12,6 +12,8 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
@@ -22,7 +24,7 @@ static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07];
+	clk->rate *= p0fc_divisors[(__raw_readl(FRQCR) >> 4) & 0x07];
 }
 
 static struct clk_ops sh7763_master_clk_ops = {
@@ -31,7 +33,7 @@ static struct clk_ops sh7763_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
+	int idx = ((__raw_readl(FRQCR) >> 4) & 0x07);
 	return clk->parent->rate / p0fc_divisors[idx];
 }
 
@@ -41,7 +43,7 @@ static struct clk_ops sh7763_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
+	int idx = ((__raw_readl(FRQCR) >> 16) & 0x07);
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -68,7 +70,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 
 static unsigned long shyway_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
+	int idx = ((__raw_readl(FRQCR) >> 20) & 0x07);
 	return clk->parent->rate / cfc_divisors[idx];
 }
 
@@ -77,7 +79,6 @@ static struct clk_ops sh7763_shyway_clk_ops = {
 };
 
 static struct clk sh7763_shyway_clk = {
-	.name		= "shyway_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7763_shyway_clk_ops,
 };
@@ -90,6 +91,13 @@ static struct clk *sh7763_onchip_clocks[] = {
 	&sh7763_shyway_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &sh7763_shyway_clk),
+};
+
 int __init arch_clk_init(void)
 {
 	struct clk *clk;
@@ -107,5 +115,7 @@ int __init arch_clk_init(void)
 
 	clk_put(clk);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
index e0b8967..9e33543 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c
@@ -21,7 +21,7 @@ static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f];
+	clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> 28) & 0x000f];
 }
 
 static struct clk_ops sh7770_master_clk_ops = {
@@ -30,7 +30,7 @@ static struct clk_ops sh7770_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
+	int idx = ((__raw_readl(FRQCR) >> 28) & 0x000f);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -40,7 +40,7 @@ static struct clk_ops sh7770_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQCR) & 0x000f);
+	int idx = (__raw_readl(FRQCR) & 0x000f);
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -50,7 +50,7 @@ static struct clk_ops sh7770_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
+	int idx = ((__raw_readl(FRQCR) >> 24) & 0x000f);
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index a249d82..62d7063 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -11,6 +11,8 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
@@ -22,7 +24,7 @@ static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003];
+	clk->rate *= pfc_divisors[__raw_readl(FRQCR) & 0x0003];
 }
 
 static struct clk_ops sh7780_master_clk_ops = {
@@ -31,7 +33,7 @@ static struct clk_ops sh7780_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inl(FRQCR) & 0x0003);
+	int idx = (__raw_readl(FRQCR) & 0x0003);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -41,7 +43,7 @@ static struct clk_ops sh7780_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
+	int idx = ((__raw_readl(FRQCR) >> 16) & 0x0007);
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -51,7 +53,7 @@ static struct clk_ops sh7780_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
+	int idx = ((__raw_readl(FRQCR) >> 24) & 0x0001);
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
@@ -74,7 +76,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 
 static unsigned long shyway_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
+	int idx = ((__raw_readl(FRQCR) >> 20) & 0x0007);
 	return clk->parent->rate / cfc_divisors[idx];
 }
 
@@ -83,7 +85,6 @@ static struct clk_ops sh7780_shyway_clk_ops = {
 };
 
 static struct clk sh7780_shyway_clk = {
-	.name		= "shyway_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &sh7780_shyway_clk_ops,
 };
@@ -96,6 +97,13 @@ static struct clk *sh7780_onchip_clocks[] = {
 	&sh7780_shyway_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &sh7780_shyway_clk),
+};
+
 int __init arch_clk_init(void)
 {
 	struct clk *clk;
@@ -113,5 +121,7 @@ int __init arch_clk_init(void)
 
 	clk_put(clk);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 73abfbf..c3e458a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -3,7 +3,7 @@
  *
  * SH7785 support for the clock framework
  *
- *  Copyright (C) 2007 - 2009  Paul Mundt
+ *  Copyright (C) 2007 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -14,6 +14,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <cpu/sh7785.h>
@@ -23,8 +24,6 @@
  * from the platform code.
  */
 static struct clk extal_clk = {
-	.name		= "extal",
-	.id		= -1,
 	.rate		= 33333333,
 };
 
@@ -42,8 +41,6 @@ static struct clk_ops pll_clk_ops = {
 };
 
 static struct clk pll_clk = {
-	.name		= "pll_clk",
-	.id		= -1,
 	.ops		= &pll_clk_ops,
 	.parent		= &extal_clk,
 	.flags		= CLK_ENABLE_ON_INIT,
@@ -57,56 +54,161 @@ static struct clk *clks[] = {
 static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
 			       24, 32, 36, 48 };
 
-static struct clk_div_mult_table div4_table = {
+static struct clk_div_mult_table div4_div_mult_table = {
 	.divisors = div2,
 	.nr_divisors = ARRAY_SIZE(div2),
 };
 
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
 enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
 	DIV4_DU, DIV4_P, DIV4_NR };
 
-#define DIV4(_str, _bit, _mask, _flags) \
-  SH_CLK_DIV4(_str, &pll_clk, FRQMR1, _bit, _mask, _flags)
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
 
 struct clk div4_clks[DIV4_NR] = {
-	[DIV4_P] = DIV4("peripheral_clk", 0, 0x0f80, 0),
-	[DIV4_DU] = DIV4("du_clk", 4, 0x0ff0, 0),
-	[DIV4_GA] = DIV4("ga_clk", 8, 0x0030, 0),
-	[DIV4_DDR] = DIV4("ddr_clk", 12, 0x000c, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4("bus_clk", 16, 0x0fe0, CLK_ENABLE_ON_INIT),
-	[DIV4_SH] = DIV4("shyway_clk", 20, 0x000c, CLK_ENABLE_ON_INIT),
-	[DIV4_U] = DIV4("umem_clk", 24, 0x000c, CLK_ENABLE_ON_INIT),
-	[DIV4_I] = DIV4("cpu_clk", 28, 0x000e, CLK_ENABLE_ON_INIT),
+	[DIV4_P] = DIV4(0, 0x0f80, 0),
+	[DIV4_DU] = DIV4(4, 0x0ff0, 0),
+	[DIV4_GA] = DIV4(8, 0x0030, 0),
+	[DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_U] = DIV4(24, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
 };
 
 #define MSTPCR0		0xffc80030
 #define MSTPCR1		0xffc80034
 
-static struct clk mstp_clks[] = {
+enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP021, MSTP020, MSTP017, MSTP016,
+       MSTP013, MSTP012, MSTP009, MSTP008, MSTP003, MSTP002,
+       MSTP119, MSTP117, MSTP105, MSTP104, MSTP100,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
 	/* MSTPCR0 */
-	SH_CLK_MSTP32("scif_fck", 5, &div4_clks[DIV4_P], MSTPCR0, 29, 0),
-	SH_CLK_MSTP32("scif_fck", 4, &div4_clks[DIV4_P], MSTPCR0, 28, 0),
-	SH_CLK_MSTP32("scif_fck", 3, &div4_clks[DIV4_P], MSTPCR0, 27, 0),
-	SH_CLK_MSTP32("scif_fck", 2, &div4_clks[DIV4_P], MSTPCR0, 26, 0),
-	SH_CLK_MSTP32("scif_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 25, 0),
-	SH_CLK_MSTP32("scif_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 24, 0),
-	SH_CLK_MSTP32("ssi_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 21, 0),
-	SH_CLK_MSTP32("ssi_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 20, 0),
-	SH_CLK_MSTP32("hac_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 17, 0),
-	SH_CLK_MSTP32("hac_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 16, 0),
-	SH_CLK_MSTP32("mmcif_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 13, 0),
-	SH_CLK_MSTP32("flctl_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 12, 0),
-	SH_CLK_MSTP32("tmu345_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 9, 0),
-	SH_CLK_MSTP32("tmu012_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 8, 0),
-	SH_CLK_MSTP32("siof_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 3, 0),
-	SH_CLK_MSTP32("hspi_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	[MSTP013] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 13, 0),
+	[MSTP012] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 12, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
 
 	/* MSTPCR1 */
-	SH_CLK_MSTP32("hudi_fck", -1, NULL, MSTPCR1, 19, 0),
-	SH_CLK_MSTP32("ubc_fck", -1, NULL, MSTPCR1, 17, 0),
-	SH_CLK_MSTP32("dmac_11_6_fck", -1, NULL, MSTPCR1, 5, 0),
-	SH_CLK_MSTP32("dmac_5_0_fck", -1, NULL, MSTPCR1, 4, 0),
-	SH_CLK_MSTP32("gdta_fck", -1, NULL, MSTPCR1, 0, 0),
+	[MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
+	[MSTP117] = SH_CLK_MSTP32(NULL, MSTPCR1, 17, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
+	[MSTP100] = SH_CLK_MSTP32(NULL, MSTPCR1, 0, 0),
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
+	CLKDEV_CON_ID("ga_clk", &div4_clks[DIV4_GA]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("umem_clk", &div4_clks[DIV4_U]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	{
+		/* SCIF5 */
+		.dev_id		= "sh-sci.5",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP029],
+	}, {
+		/* SCIF4 */
+		.dev_id		= "sh-sci.4",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP028],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP027],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP026],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP025],
+	}, {
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP024],
+	},
+	CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
+	CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]),
+	CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU3 */
+		.dev_id		= "sh_tmu.3",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU4 */
+		.dev_id		= "sh_tmu.4",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU5 */
+		.dev_id		= "sh_tmu.5",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	},
+	CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
+	CLKDEV_CON_ID("ubc_fck", &mstp_clks[MSTP117]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
+	CLKDEV_CON_ID("gdta_fck", &mstp_clks[MSTP100]),
 };
 
 int __init arch_clk_init(void)
@@ -115,12 +217,14 @@ int __init arch_clk_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(clks); i++)
 		ret |= clk_register(clks[i]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	if (!ret)
 		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
 					   &div4_table);
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index a0e8869..597c9fb 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -3,11 +3,7 @@
  *
  * SH7786 support for the clock framework
  *
- * Copyright (C) 2008, 2009  Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on SH7785
- *  Copyright (C) 2007  Paul Mundt
+ *  Copyright (C) 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -15,127 +11,263 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
 
-static int ifc_divisors[] = { 1, 2, 4, 1 };
-static int sfc_divisors[] = { 1, 1, 4, 1 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1,
-			     24, 32, 1, 1, 1, 1, 1, 1 };
-static int mfc_divisors[] = { 1, 1, 4, 1 };
-static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1,
-			      24, 32, 1, 48, 1, 1, 1, 1 };
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 33333333,
+};
 
-static void master_clk_init(struct clk *clk)
+static unsigned long pll_recalc(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
-}
+	int multiplier;
 
-static struct clk_ops sh7786_master_clk_ops = {
-	.init		= master_clk_init,
-};
+	/*
+	 * Clock modes 0, 1, and 2 use an x64 multiplier against PLL1,
+	 * while modes 3, 4, and 5 use an x32.
+	 */
+	multiplier = (sh_mv.mv_mode_pins() & 0xf) < 3 ? 64 : 32;
 
-static unsigned long module_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQMR1) & 0x000f);
-	return clk->parent->rate / pfc_divisors[idx];
+	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops sh7786_module_clk_ops = {
-	.recalc		= module_clk_recalc,
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
 };
 
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
-	return clk->parent->rate / bfc_divisors[idx];
-}
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
 
-static struct clk_ops sh7786_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
 };
 
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
-	return clk->parent->rate / ifc_divisors[idx];
-}
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
 
-static struct clk_ops sh7786_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
 };
 
-static struct clk_ops *sh7786_clk_ops[] = {
-	&sh7786_master_clk_ops,
-	&sh7786_module_clk_ops,
-	&sh7786_bus_clk_ops,
-	&sh7786_cpu_clk_ops,
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7786_clk_ops))
-		*ops = sh7786_clk_ops[idx];
-}
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_DU, DIV4_P, DIV4_NR };
 
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
-	return clk->parent->rate / sfc_divisors[idx];
-}
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
 
-static struct clk_ops sh7786_shyway_clk_ops = {
-	.recalc		= shyway_clk_recalc,
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4(0, 0x0b40, 0),
+	[DIV4_DU] = DIV4(4, 0x0010, 0),
+	[DIV4_DDR] = DIV4(12, 0x0002, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0360, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x0002, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x0006, CLK_ENABLE_ON_INIT),
 };
 
-static struct clk sh7786_shyway_clk = {
-	.name		= "shyway_clk",
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh7786_shyway_clk_ops,
-};
+#define MSTPCR0		0xffc40030
+#define MSTPCR1		0xffc40034
 
-static unsigned long ddr_clk_recalc(struct clk *clk)
-{
-	int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
-	return clk->parent->rate / mfc_divisors[idx];
-}
+enum { MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP023, MSTP022, MSTP021, MSTP020, MSTP017, MSTP016,
+       MSTP015, MSTP014, MSTP011, MSTP010, MSTP009, MSTP008,
+       MSTP005, MSTP004, MSTP002,
+       MSTP112, MSTP110, MSTP109, MSTP108,
+       MSTP105, MSTP104, MSTP103, MSTP102,
+       MSTP_NR };
 
-static struct clk_ops sh7786_ddr_clk_ops = {
-	.recalc		= ddr_clk_recalc,
-};
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0),
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0),
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0),
+	[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0),
+	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0),
+	[MSTP020] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 20, 0),
+	[MSTP017] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 17, 0),
+	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0),
+	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0),
+	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0),
+	[MSTP011] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 11, 0),
+	[MSTP010] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 10, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP005] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 5, 0),
+	[MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
 
-static struct clk sh7786_ddr_clk = {
-	.name		= "ddr_clk",
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh7786_ddr_clk_ops,
+	/* MSTPCR1 */
+	[MSTP112] = SH_CLK_MSTP32(NULL, MSTPCR1, 12, 0),
+	[MSTP110] = SH_CLK_MSTP32(NULL, MSTPCR1, 10, 0),
+	[MSTP109] = SH_CLK_MSTP32(NULL, MSTPCR1, 9, 0),
+	[MSTP108] = SH_CLK_MSTP32(NULL, MSTPCR1, 8, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
+	[MSTP103] = SH_CLK_MSTP32(NULL, MSTPCR1, 3, 0),
+	[MSTP102] = SH_CLK_MSTP32(NULL, MSTPCR1, 2, 0),
 };
 
-/*
- * Additional SH7786-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7786_onchip_clocks[] = {
-	&sh7786_shyway_clk,
-	&sh7786_ddr_clk,
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("du_clk", &div4_clks[DIV4_DU]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	{
+		/* SCIF5 */
+		.dev_id		= "sh-sci.5",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP029],
+	}, {
+		/* SCIF4 */
+		.dev_id		= "sh-sci.4",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP028],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP027],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP026],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP025],
+	}, {
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP024],
+	},
+	CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
+	CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
+	CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
+	CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
+	CLKDEV_CON_ID("hac1_fck", &mstp_clks[MSTP017]),
+	CLKDEV_CON_ID("hac0_fck", &mstp_clks[MSTP016]),
+	CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]),
+	CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU3 */
+		.dev_id		= "sh_tmu.3",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU4 */
+		.dev_id		= "sh_tmu.4",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU5 */
+		.dev_id		= "sh_tmu.5",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU6 */
+		.dev_id		= "sh_tmu.6",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP010],
+	}, {
+		/* TMU7 */
+		.dev_id		= "sh_tmu.7",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP010],
+	}, {
+		/* TMU8 */
+		.dev_id		= "sh_tmu.8",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP010],
+	}, {
+		/* TMU9 */
+		.dev_id		= "sh_tmu.9",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP011],
+	}, {
+		/* TMU10 */
+		.dev_id		= "sh_tmu.10",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP011],
+	}, {
+		/* TMU11 */
+		.dev_id		= "sh_tmu.11",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP011],
+	},
+	CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]),
+	CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]),
+	CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP112]),
+	CLKDEV_CON_ID("pcie2_fck", &mstp_clks[MSTP110]),
+	CLKDEV_CON_ID("pcie1_fck", &mstp_clks[MSTP109]),
+	CLKDEV_CON_ID("pcie0_fck", &mstp_clks[MSTP108]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
+	CLKDEV_CON_ID("du_fck", &mstp_clks[MSTP103]),
+	CLKDEV_CON_ID("ether_fck", &mstp_clks[MSTP102]),
 };
 
 int __init arch_clk_init(void)
 {
-	struct clk *clk;
 	int i, ret = 0;
 
-	cpg_clk_init();
-
-	clk = clk_get(NULL, "master_clk");
-	for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
-		struct clk *clkp = sh7786_onchip_clocks[i];
-
-		clkp->parent = clk;
-		ret |= clk_register(clkp);
-	}
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
-	clk_put(clk);
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 23c27d3..236a628 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -13,9 +13,10 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
 
 static int ifc_divisors[] = { 1, 2, 4 ,6 };
 static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
@@ -33,7 +34,7 @@ static int cfc_divisors[] = { 1, 1, 4, 6 };
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+	clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK];
 }
 
 static struct clk_ops shx3_master_clk_ops = {
@@ -42,7 +43,7 @@ static struct clk_ops shx3_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+	int idx = ((__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK);
 	return clk->parent->rate / pfc_divisors[idx];
 }
 
@@ -52,7 +53,7 @@ static struct clk_ops shx3_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+	int idx = ((__raw_readl(FRQCR) >> BFC_POS) & BFC_MSK);
 	return clk->parent->rate / bfc_divisors[idx];
 }
 
@@ -62,7 +63,7 @@ static struct clk_ops shx3_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+	int idx = ((__raw_readl(FRQCR) >> IFC_POS) & IFC_MSK);
 	return clk->parent->rate / ifc_divisors[idx];
 }
 
@@ -85,7 +86,7 @@ void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 
 static unsigned long shyway_clk_recalc(struct clk *clk)
 {
-	int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+	int idx = ((__raw_readl(FRQCR) >> CFC_POS) & CFC_MSK);
 	return clk->parent->rate / cfc_divisors[idx];
 }
 
@@ -94,7 +95,6 @@ static struct clk_ops shx3_shyway_clk_ops = {
 };
 
 static struct clk shx3_shyway_clk = {
-	.name		= "shyway_clk",
 	.flags		= CLK_ENABLE_ON_INIT,
 	.ops		= &shx3_shyway_clk_ops,
 };
@@ -107,6 +107,13 @@ static struct clk *shx3_onchip_clocks[] = {
 	&shx3_shyway_clk,
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("shyway_clk", &shx3_shyway_clk),
+};
+
 int __init arch_clk_init(void)
 {
 	struct clk *clk;
@@ -124,5 +131,7 @@ int __init arch_clk_init(void)
 
 	clk_put(clk);
 
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
index cb9d07b..0688a75 100644
--- a/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c
@@ -278,6 +278,7 @@ enum {
 	HIZA8_LCDC, HIZA8_HIZ,
 	HIZA7_LCDC, HIZA7_HIZ,
 	HIZA6_LCDC, HIZA6_HIZ,
+	HIZB4_SIUA, HIZB4_HIZ,
 	HIZB1_VIO, HIZB1_HIZ,
 	HIZB0_VIO, HIZB0_HIZ,
 	HIZC15_IRQ7, HIZC15_HIZ,
@@ -546,7 +547,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(VIO_VD2_MARK, PSE3_VIO, MSELB9_VIO2,
 		    HIZB0_VIO, FOE_VIO_VD2),
 	PINMUX_DATA(VIO_HD2_MARK, PSE3_VIO, MSELB9_VIO2,
-		    HIZB1_VIO, HIZB1_VIO, FCE_VIO_HD2),
+		    HIZB1_VIO, FCE_VIO_HD2),
 	PINMUX_DATA(VIO_CLK2_MARK, PSE3_VIO, MSELB9_VIO2,
 		    HIZB1_VIO, FRB_VIO_CLK2),
 
@@ -658,14 +659,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(SDHICLK_MARK, SDHICLK),
 
 	/* SIU - Port A */
-	PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, SIUAOLR_SIOF1_SYNC),
-	PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, SIUAOBT_SIOF1_SCK),
-	PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, SIUAISLD_SIOF1_RXD),
-	PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, SIUAILR_SIOF1_SS2),
-	PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, SIUAIBT_SIOF1_SS1),
-	PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, SIUAOSLD_SIOF1_TXD),
-	PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, PSB1_SIUMCKA, PTK0),
-	PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, PTK0),
+	PINMUX_DATA(SIUAOLR_MARK, PSC13_SIUAOLR, HIZB4_SIUA, SIUAOLR_SIOF1_SYNC),
+	PINMUX_DATA(SIUAOBT_MARK, PSC14_SIUAOBT, HIZB4_SIUA, SIUAOBT_SIOF1_SCK),
+	PINMUX_DATA(SIUAISLD_MARK, PSC15_SIUAISLD, HIZB4_SIUA, SIUAISLD_SIOF1_RXD),
+	PINMUX_DATA(SIUAILR_MARK, PSC11_SIUAILR, HIZB4_SIUA, SIUAILR_SIOF1_SS2),
+	PINMUX_DATA(SIUAIBT_MARK, PSC12_SIUAIBT, HIZB4_SIUA, SIUAIBT_SIOF1_SS1),
+	PINMUX_DATA(SIUAOSLD_MARK, PSB0_SIUAOSLD, HIZB4_SIUA, SIUAOSLD_SIOF1_TXD),
+	PINMUX_DATA(SIUMCKA_MARK, PSE11_SIUMCKA_SIOF1_MCK, HIZB4_SIUA, PSB1_SIUMCKA, PTK0),
+	PINMUX_DATA(SIUFCKA_MARK, PSE11_SIUFCKA, HIZB4_SIUA, PTK0),
 
 	/* SIU - Port B */
 	PINMUX_DATA(SIUBOLR_MARK, PSB11_SIUBOLR, SIOSTRB1_SIUBOLR),
@@ -1612,7 +1613,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		0, 0,
 		0, 0,
 		0, 0,
-		0, 0,
+		HIZB4_SIUA, HIZB4_HIZ,
 		0, 0,
 		0, 0,
 		HIZB1_VIO, HIZB1_HIZ,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 45eb1bf..3681cafd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -21,7 +21,6 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 80, 80, 80, 80 },
-	.clk		= "scif0",
 };
 
 static struct platform_device scif0_device = {
@@ -37,7 +36,6 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 81, 81, 81, 81 },
-	.clk		= "scif1",
 };
 
 static struct platform_device scif1_device = {
@@ -53,7 +51,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 82, 82, 82, 82 },
-	.clk		= "scif2",
 };
 
 static struct platform_device scif2_device = {
@@ -69,7 +66,6 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 83, 83, 83, 83 },
-	.clk		= "scif3",
 };
 
 static struct platform_device scif3_device = {
@@ -207,17 +203,14 @@ static struct platform_device jpu_device = {
 };
 
 static struct sh_timer_config cmt_platform_data = {
-	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
-	.clk = "cmt0",
 	.clockevent_rating = 125,
 	.clocksource_rating = 200,
 };
 
 static struct resource cmt_resources[] = {
 	[0] = {
-		.name	= "CMT",
 		.start	= 0x044a0060,
 		.end	= 0x044a006b,
 		.flags	= IORESOURCE_MEM,
@@ -239,16 +232,13 @@ static struct platform_device cmt_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu0",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -270,16 +260,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu0",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -301,15 +288,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu0",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002b,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c494c19..8dab9e1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -23,7 +23,6 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 80, 80, 80, 80 },
-	.clk		= "scif0",
 };
 
 static struct platform_device scif0_device = {
@@ -169,17 +168,14 @@ static struct platform_device veu1_device = {
 };
 
 static struct sh_timer_config cmt_platform_data = {
-	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
-	.clk = "cmt0",
 	.clockevent_rating = 125,
 	.clocksource_rating = 200,
 };
 
 static struct resource cmt_resources[] = {
 	[0] = {
-		.name	= "CMT",
 		.start	= 0x044a0060,
 		.end	= 0x044a006b,
 		.flags	= IORESOURCE_MEM,
@@ -201,16 +197,13 @@ static struct platform_device cmt_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu0",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -232,16 +225,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu0",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -263,15 +253,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu0",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002b,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index b5335b5..156ccc9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -7,26 +7,182 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
-#include <linux/mm.h>
+#include <linux/sh_timer.h>
 #include <linux/uio_driver.h>
 #include <linux/usb/m66592.h>
-#include <linux/sh_timer.h>
+
 #include <asm/clock.h>
 #include <asm/mmzone.h>
-#include <asm/dma-sh.h>
+#include <asm/siu.h>
+
+#include <cpu/dma-register.h>
 #include <cpu/sh7722.h>
 
+static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xffe0000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xffe00014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xffe1000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xffe10014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xffe2000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xffe20014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUA_TX,
+		.addr		= 0xa454c098,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUA_RX,
+		.addr		= 0xa454c090,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUB_TX,
+		.addr		= 0xa454c09c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SIUB_RX,
+		.addr		= 0xa454c094,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xb6,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	},
+};
+
+static const struct sh_dmae_channel sh7722_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+	.slave		= sh7722_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7722_dmae_slaves),
+	.channel	= sh7722_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7722_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct resource sh7722_dmae_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 78,
+		.end	= 78,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= 48,
+		.end	= 51,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= 76,
+		.end	= 77,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device dma_device = {
+	.name		= "sh-dma-engine",
+	.id		= -1,
+	.resource	= sh7722_dmae_resources,
+	.num_resources	= ARRAY_SIZE(sh7722_dmae_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_DMAC,
+	},
+};
+
 /* Serial */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase        = 0xffe00000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 80, 80, 80, 80 },
-	.clk		= "scif0",
 };
 
 static struct platform_device scif0_device = {
@@ -42,7 +198,6 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 81, 81, 81, 81 },
-	.clk		= "scif1",
 };
 
 static struct platform_device scif1_device = {
@@ -58,7 +213,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 82, 82, 82, 82 },
-	.clk		= "scif2",
 };
 
 static struct platform_device scif2_device = {
@@ -253,17 +407,14 @@ static struct platform_device jpu_device = {
 };
 
 static struct sh_timer_config cmt_platform_data = {
-	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
-	.clk = "cmt0",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
 
 static struct resource cmt_resources[] = {
 	[0] = {
-		.name	= "CMT",
 		.start	= 0x044a0060,
 		.end	= 0x044a006b,
 		.flags	= IORESOURCE_MEM,
@@ -288,16 +439,13 @@ static struct platform_device cmt_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu0",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -322,16 +470,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu0",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -356,15 +501,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu0",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002b,
 		.flags	= IORESOURCE_MEM,
@@ -388,15 +530,36 @@ static struct platform_device tmu2_device = {
 	},
 };
 
-static struct sh_dmae_pdata dma_platform_data = {
-	.mode = 0,
+static struct siu_platform siu_platform_data = {
+	.dma_dev	= &dma_device.dev,
+	.dma_slave_tx_a	= SHDMA_SLAVE_SIUA_TX,
+	.dma_slave_rx_a	= SHDMA_SLAVE_SIUA_RX,
+	.dma_slave_tx_b	= SHDMA_SLAVE_SIUB_TX,
+	.dma_slave_rx_b	= SHDMA_SLAVE_SIUB_RX,
 };
 
-static struct platform_device dma_device = {
-	.name		= "sh-dma-engine",
+static struct resource siu_resources[] = {
+	[0] = {
+		.start	= 0xa4540000,
+		.end	= 0xa454c10f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 108,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device siu_device = {
+	.name		= "sh_siu",
 	.id		= -1,
-	.dev		= {
-		.platform_data	= &dma_platform_data,
+	.dev = {
+		.platform_data	= &siu_platform_data,
+	},
+	.resource	= siu_resources,
+	.num_resources	= ARRAY_SIZE(siu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_SIU,
 	},
 };
 
@@ -414,6 +577,7 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&vpu_device,
 	&veu_device,
 	&jpu_device,
+	&siu_device,
 	&dma_device,
 };
 
@@ -446,6 +610,8 @@ void __init plat_early_device_setup(void)
 
 enum {
 	UNUSED=0,
+	ENABLED,
+	DISABLED,
 
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -461,7 +627,6 @@ enum {
 	SCIF0, SCIF1, SCIF2, SIOF0, SIOF1, SIO,
 	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
 	I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
-	SDHI0, SDHI1, SDHI2, SDHI3,
 	CMT, TSIF, SIU, TWODG,
 	TMU0, TMU1, TMU2,
 	IRDA, JPU, LCDC,
@@ -494,8 +659,8 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
 	INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
 	INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
-	INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
-	INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+	INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+	INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
 	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
 	INTC_VECT(SIU, 0xf80), INTC_VECT(TWODG, 0xfa0),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@@ -513,7 +678,6 @@ static struct intc_group groups[] __initdata = {
 	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
 		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
 	INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
-	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
@@ -535,7 +699,7 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
 	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
 	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
-	  { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, TWODG, SIU } },
+	  { DISABLED, DISABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
 	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
 	  { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
 	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -573,9 +737,13 @@ static struct intc_mask_reg ack_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
-			     mask_registers, prio_registers, sense_registers,
-			     ack_registers);
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7722",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 772b926..0eadefd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -26,7 +26,6 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 80, 80, 80, 80 },
-	.clk		= "scif0",
 };
 
 static struct platform_device scif0_device = {
@@ -42,7 +41,6 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 81, 81, 81, 81 },
-	.clk		= "scif1",
 };
 
 static struct platform_device scif1_device = {
@@ -58,7 +56,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 82, 82, 82, 82 },
-	.clk		= "scif2",
 };
 
 static struct platform_device scif2_device = {
@@ -74,7 +71,6 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 56, 56, 56, 56 },
-	.clk		= "scif3",
 };
 
 static struct platform_device scif3_device = {
@@ -90,7 +86,6 @@ static struct plat_sci_port scif4_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 88, 88, 88, 88 },
-	.clk		= "scif4",
 };
 
 static struct platform_device scif4_device = {
@@ -106,7 +101,6 @@ static struct plat_sci_port scif5_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 109, 109, 109, 109 },
-	.clk		= "scif5",
 };
 
 static struct platform_device scif5_device = {
@@ -211,17 +205,14 @@ static struct platform_device veu1_device = {
 };
 
 static struct sh_timer_config cmt_platform_data = {
-	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
-	.clk = "cmt0",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
 
 static struct resource cmt_resources[] = {
 	[0] = {
-		.name	= "CMT",
 		.start	= 0x044a0060,
 		.end	= 0x044a006b,
 		.flags	= IORESOURCE_MEM,
@@ -246,16 +237,13 @@ static struct platform_device cmt_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu0",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -280,16 +268,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu0",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -314,15 +299,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu0",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002b,
 		.flags	= IORESOURCE_MEM,
@@ -347,15 +329,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu1",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffd90008,
 		.end	= 0xffd90013,
 		.flags	= IORESOURCE_MEM,
@@ -380,15 +359,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu1",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffd90014,
 		.end	= 0xffd9001f,
 		.flags	= IORESOURCE_MEM,
@@ -413,15 +389,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu1",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffd90020,
 		.end	= 0xffd9002b,
 		.flags	= IORESOURCE_MEM,
@@ -592,14 +565,17 @@ void __init plat_early_device_setup(void)
 #define RAMCR_CACHE_L2FC	0x0002
 #define RAMCR_CACHE_L2E		0x0001
 #define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-void __uses_jump_to_uncached l2_cache_init(void)
+
+void l2_cache_init(void)
 {
 	/* Enable L2 cache */
-	ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+	__raw_writel(L2_CACHE_ENABLE, RAMCR);
 }
 
 enum {
 	UNUSED=0,
+	ENABLED,
+	DISABLED,
 
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -622,7 +598,6 @@ enum {
 	SCIFA_SCIFA1,
 	FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
 	I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
-	SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
 	CMT_CMTI,
 	TSIF_TSIFI,
 	SIU_SIUI,
@@ -630,7 +605,6 @@ enum {
 	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
 	IRDA_IRDAI,
 	ATAPI_ATAPII,
-	SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
 	VEU2H1_VEU2HI,
 	LCDC_LCDCI,
 	TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
@@ -701,9 +675,9 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(I2C_WAITI,0xE40),
 	INTC_VECT(I2C_DTEI,0xE60),
 
-	INTC_VECT(SDHI0_SDHII0,0xE80),
-	INTC_VECT(SDHI0_SDHII1,0xEA0),
-	INTC_VECT(SDHI0_SDHII2,0xEC0),
+	INTC_VECT(SDHI0, 0xE80),
+	INTC_VECT(SDHI0, 0xEA0),
+	INTC_VECT(SDHI0, 0xEC0),
 
 	INTC_VECT(CMT_CMTI,0xF00),
 	INTC_VECT(TSIF_TSIFI,0xF20),
@@ -717,9 +691,9 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(IRDA_IRDAI,0x480),
 	INTC_VECT(ATAPI_ATAPII,0x4A0),
 
-	INTC_VECT(SDHI1_SDHII0,0x4E0),
-	INTC_VECT(SDHI1_SDHII1,0x500),
-	INTC_VECT(SDHI1_SDHII2,0x520),
+	INTC_VECT(SDHI1, 0x4E0),
+	INTC_VECT(SDHI1, 0x500),
+	INTC_VECT(SDHI1, 0x520),
 
 	INTC_VECT(VEU2H1_VEU2HI,0x560),
 	INTC_VECT(LCDC_LCDCI,0x580),
@@ -738,15 +712,14 @@ static struct intc_group groups[] __initdata = {
 	INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
 	INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
 	INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
-	INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
 	INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
 	INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
-	INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
-	  { 0,  TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    0, DISABLED, ENABLED, ENABLED } },
 	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
 	  { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
 	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
@@ -763,7 +736,8 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
 	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
 	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
-	  { 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
+	  { 0, DISABLED, ENABLED, ENABLED,
+	    0, 0, SCIFA_SCIFA2, SIU_SIUI } },
 	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
 	  { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
 	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -803,9 +777,13 @@ static struct intc_mask_reg ack_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
-			     mask_registers, prio_registers, sense_registers,
-			     ack_registers);
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7723",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index d32f96c..79c556e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -18,26 +18,239 @@
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
 #include <linux/uio_driver.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
 #include <linux/io.h>
 #include <linux/notifier.h>
+
 #include <asm/suspend.h>
 #include <asm/clock.h>
-#include <asm/dma-sh.h>
 #include <asm/mmzone.h>
+
+#include <cpu/dma-register.h>
 #include <cpu/sh7724.h>
 
 /* DMA */
+static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xffe0000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xffe00014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xffe1000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xffe10014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xffe2000c,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xffe20014,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
+		.addr		= 0xa4e30020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
+		.addr		= 0xa4e30024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
+		.addr		= 0xa4e40020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x31,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
+		.addr		= 0xa4e40024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x32,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
+		.addr		= 0xa4e50020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x35,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
+		.addr		= 0xa4e50024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x36,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0x04ce0030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
+		.addr		= 0x04cf0030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc9,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
+		.addr		= 0x04cf0030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xca,
+	},
+};
+
+static const struct sh_dmae_channel sh7724_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
 static struct sh_dmae_pdata dma_platform_data = {
-	.mode = SHDMA_DMAOR1,
+	.slave		= sh7724_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7724_dmae_slaves),
+	.channel	= sh7724_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7724_dmae_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+/* Resource order important! */
+static struct resource sh7724_dmae0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 78,
+		.end	= 78,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= 48,
+		.end	= 51,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= 76,
+		.end	= 77,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
-static struct platform_device dma_device = {
-	.name	= "sh-dma-engine",
-	.id		= -1,
-	.dev	= {
+/* Resource order important! */
+static struct resource sh7724_dmae1_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfdc08020,
+		.end	= 0xfdc0808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfdc09000,
+		.end	= 0xfdc0900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= 74,
+		.end	= 74,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-3 */
+		.start	= 40,
+		.end	= 43,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 4-5 */
+		.start	= 72,
+		.end	= 73,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= sh7724_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7724_dmae0_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_DMAC0,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7724_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7724_dmae1_resources),
+	.dev		= {
 		.platform_data	= &dma_platform_data,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_DMAC1,
+	},
 };
 
 /* Serial */
@@ -46,7 +259,6 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 80, 80, 80, 80 },
-	.clk		= "scif0",
 };
 
 static struct platform_device scif0_device = {
@@ -62,7 +274,6 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 81, 81, 81, 81 },
-	.clk		= "scif1",
 };
 
 static struct platform_device scif1_device = {
@@ -78,7 +289,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIF,
 	.irqs           = { 82, 82, 82, 82 },
-	.clk		= "scif2",
 };
 
 static struct platform_device scif2_device = {
@@ -94,7 +304,6 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 56, 56, 56, 56 },
-	.clk		= "scif3",
 };
 
 static struct platform_device scif3_device = {
@@ -110,7 +319,6 @@ static struct plat_sci_port scif4_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 88, 88, 88, 88 },
-	.clk		= "scif4",
 };
 
 static struct platform_device scif4_device = {
@@ -126,7 +334,6 @@ static struct plat_sci_port scif5_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.type           = PORT_SCIFA,
 	.irqs           = { 109, 109, 109, 109 },
-	.clk		= "scif5",
 };
 
 static struct platform_device scif5_device = {
@@ -318,17 +525,14 @@ static struct platform_device veu1_device = {
 };
 
 static struct sh_timer_config cmt_platform_data = {
-	.name = "CMT",
 	.channel_offset = 0x60,
 	.timer_bit = 5,
-	.clk = "cmt0",
 	.clockevent_rating = 125,
 	.clocksource_rating = 200,
 };
 
 static struct resource cmt_resources[] = {
 	[0] = {
-		.name	= "CMT",
 		.start	= 0x044a0060,
 		.end	= 0x044a006b,
 		.flags	= IORESOURCE_MEM,
@@ -353,16 +557,13 @@ static struct platform_device cmt_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu0",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -387,16 +588,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu0",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -421,15 +619,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu0",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002b,
 		.flags	= IORESOURCE_MEM,
@@ -455,15 +650,12 @@ static struct platform_device tmu2_device = {
 
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu1",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffd90008,
 		.end	= 0xffd90013,
 		.flags	= IORESOURCE_MEM,
@@ -488,15 +680,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu1",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffd90014,
 		.end	= 0xffd9001f,
 		.flags	= IORESOURCE_MEM,
@@ -521,15 +710,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu1",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffd90020,
 		.end	= 0xffd9002b,
 		.flags	= IORESOURCE_MEM,
@@ -663,7 +849,8 @@ static struct platform_device *sh7724_devices[] __initdata = {
 	&tmu3_device,
 	&tmu4_device,
 	&tmu5_device,
-	&dma_device,
+	&dma0_device,
+	&dma1_device,
 	&rtc_device,
 	&iic0_device,
 	&iic1_device,
@@ -714,14 +901,17 @@ void __init plat_early_device_setup(void)
 #define RAMCR_CACHE_L2FC	0x0002
 #define RAMCR_CACHE_L2E		0x0001
 #define L2_CACHE_ENABLE		(RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
-void __uses_jump_to_uncached l2_cache_init(void)
+
+void l2_cache_init(void)
 {
 	/* Enable L2 cache */
-	ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+	__raw_writel(L2_CACHE_ENABLE, RAMCR);
 }
 
 enum {
 	UNUSED = 0,
+	ENABLED,
+	DISABLED,
 
 	/* interrupt sources */
 	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -750,14 +940,12 @@ enum {
 	ETHI,
 	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
 	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
-	SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3,
 	CMT,
 	TSIF,
 	FSI,
 	SCIFA5,
 	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
 	IRDA,
-	SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2,
 	JPU,
 	_2DDMAC,
 	MMC_MMC2I, MMC_MMC3I,
@@ -839,10 +1027,10 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(I2C0_WAITI, 0xE40),
 	INTC_VECT(I2C0_DTEI, 0xE60),
 
-	INTC_VECT(SDHI0_SDHII0, 0xE80),
-	INTC_VECT(SDHI0_SDHII1, 0xEA0),
-	INTC_VECT(SDHI0_SDHII2, 0xEC0),
-	INTC_VECT(SDHI0_SDHII3, 0xEE0),
+	INTC_VECT(SDHI0, 0xE80),
+	INTC_VECT(SDHI0, 0xEA0),
+	INTC_VECT(SDHI0, 0xEC0),
+	INTC_VECT(SDHI0, 0xEE0),
 
 	INTC_VECT(CMT,    0xF00),
 	INTC_VECT(TSIF,   0xF20),
@@ -855,9 +1043,9 @@ static struct intc_vect vectors[] __initdata = {
 
 	INTC_VECT(IRDA,    0x480),
 
-	INTC_VECT(SDHI1_SDHII0, 0x4E0),
-	INTC_VECT(SDHI1_SDHII1, 0x500),
-	INTC_VECT(SDHI1_SDHII2, 0x520),
+	INTC_VECT(SDHI1, 0x4E0),
+	INTC_VECT(SDHI1, 0x500),
+	INTC_VECT(SDHI1, 0x520),
 
 	INTC_VECT(JPU, 0x560),
 	INTC_VECT(_2DDMAC, 0x4A0),
@@ -883,8 +1071,6 @@ static struct intc_group groups[] __initdata = {
 	INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
 	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
 	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
-	INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2, SDHI0_SDHII3),
-	INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2),
 	INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
 	INTC_GROUP(MMCIF, MMC_MMC2I, MMC_MMC3I),
 };
@@ -892,7 +1078,7 @@ static struct intc_group groups[] __initdata = {
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
 	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
-	    0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } },
+	    0, DISABLED, ENABLED, ENABLED } },
 	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
 	  { VIO_VOU, VIO_VEU1, VIO_BEU0, VIO_CEU0,
 	    DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
@@ -914,7 +1100,7 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
 	    I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
 	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
-	  { SDHI0_SDHII3, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0,
+	  { DISABLED, DISABLED, ENABLED, ENABLED,
 	    0, 0, SCIFA5, FSI } },
 	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
 	  { 0, 0, 0, CMT, 0, USB1, USB0, 0 } },
@@ -961,9 +1147,13 @@ static struct intc_mask_reg ack_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups,
-			     mask_registers, prio_registers, sense_registers,
-			     ack_registers);
+static struct intc_desc intc_desc __initdata = {
+	.name = "sh7724",
+	.force_enable = ENABLED,
+	.force_disable = DISABLED,
+	.hw = INTC_HW_DESC(vectors, groups, mask_registers,
+			   prio_registers, sense_registers, ack_registers),
+};
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 37e32ef..444aca9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -63,16 +63,13 @@ static struct platform_device scif4_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xfe430008,
 		.end	= 0xfe430013,
 		.flags	= IORESOURCE_MEM,
@@ -94,16 +91,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xfe430014,
 		.end	= 0xfe43001f,
 		.flags	= IORESOURCE_MEM,
@@ -487,17 +481,17 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ3-0 + IRQ7-4 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	/* select IRL mode for IRL3-0 + IRL7-4 */
-	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
 
 	/* disable holding function, ie enable "SH-4 Mode" */
-	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
 
 	register_intc_controller(&intc_desc);
 }
@@ -507,32 +501,32 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ7654:
 		/* select IRQ mode for IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq4567);
 		break;
 	case IRQ_MODE_IRQ3210:
 		/* select IRQ mode for IRL3-0 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq0123);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl4567);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl0123);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 6aba26f..5b5f6b0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -131,16 +131,13 @@ static struct platform_device usbf_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -162,16 +159,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -193,15 +187,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -223,15 +214,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffd88008,
 		.end	= 0xffd88013,
 		.flags	= IORESOURCE_MEM,
@@ -253,15 +241,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffd88014,
 		.end	= 0xffd8801f,
 		.flags	= IORESOURCE_MEM,
@@ -283,15 +268,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffd88020,
 		.end	= 0xffd8802b,
 		.flags	= IORESOURCE_MEM,
@@ -538,11 +520,11 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ7-0 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	register_intc_controller(&intc_desc);
 }
@@ -552,27 +534,27 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ:
 		/* select IRQ mode for IRL3-0 + IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
 		register_intc_controller(&intc_irq_desc);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl7654_desc);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl3210_desc);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index c1643bc..7270d7f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -165,16 +165,13 @@ static struct platform_device scif9_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -196,16 +193,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -227,15 +221,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -257,15 +248,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffd81008,
 		.end	= 0xffd81013,
 		.flags	= IORESOURCE_MEM,
@@ -287,15 +275,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffd81014,
 		.end	= 0xffd8101f,
 		.flags	= IORESOURCE_MEM,
@@ -317,15 +302,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffd81020,
 		.end	= 0xffd8102f,
 		.flags	= IORESOURCE_MEM,
@@ -347,15 +329,12 @@ static struct platform_device tmu5_device = {
 };
 
 static struct sh_timer_config tmu6_platform_data = {
-	.name = "TMU6",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu6_resources[] = {
 	[0] = {
-		.name	= "TMU6",
 		.start	= 0xffd82008,
 		.end	= 0xffd82013,
 		.flags	= IORESOURCE_MEM,
@@ -377,15 +356,12 @@ static struct platform_device tmu6_device = {
 };
 
 static struct sh_timer_config tmu7_platform_data = {
-	.name = "TMU7",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu7_resources[] = {
 	[0] = {
-		.name	= "TMU7",
 		.start	= 0xffd82014,
 		.end	= 0xffd8201f,
 		.flags	= IORESOURCE_MEM,
@@ -407,15 +383,12 @@ static struct platform_device tmu7_device = {
 };
 
 static struct sh_timer_config tmu8_platform_data = {
-	.name = "TMU8",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu8_resources[] = {
 	[0] = {
-		.name	= "TMU8",
 		.start	= 0xffd82020,
 		.end	= 0xffd8202b,
 		.flags	= IORESOURCE_MEM,
@@ -694,17 +667,17 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ7-0 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	/* select IRL mode for IRL3-0 + IRL7-4 */
-	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
 
 	/* disable holding function, ie enable "SH-4 Mode" */
-	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
 
 	register_intc_controller(&intc_desc);
 }
@@ -714,27 +687,27 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ:
 		/* select IRQ mode for IRL3-0 + IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
 		register_intc_controller(&intc_irq_desc);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl7654_desc);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl3210_desc);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index c310558..0f41486 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -12,8 +12,10 @@
 #include <linux/serial.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
-#include <asm/dma-sh.h>
+
+#include <cpu/dma-register.h>
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffe00000,
@@ -46,16 +48,13 @@ static struct platform_device scif1_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -77,16 +76,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -108,15 +104,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -138,15 +131,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffdc0008,
 		.end	= 0xffdc0013,
 		.flags	= IORESOURCE_MEM,
@@ -168,15 +158,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffdc0014,
 		.end	= 0xffdc001f,
 		.flags	= IORESOURCE_MEM,
@@ -198,15 +185,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffdc0020,
 		.end	= 0xffdc002b,
 		.flags	= IORESOURCE_MEM,
@@ -247,15 +231,131 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
-static struct sh_dmae_pdata dma_platform_data = {
-	.mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+/* DMA */
+static const struct sh_dmae_channel sh7780_dmae0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const struct sh_dmae_channel sh7780_dmae1_channels[] = {
+	{
+		.offset = 0,
+	}, {
+		.offset = 0x10,
+	}, {
+		.offset = 0x20,
+	}, {
+		.offset = 0x30,
+	}, {
+		.offset = 0x50,
+	}, {
+		.offset = 0x60,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= sh7780_dmae0_channels,
+	.channel_num	= ARRAY_SIZE(sh7780_dmae0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma1_platform_data = {
+	.channel	= sh7780_dmae1_channels,
+	.channel_num	= ARRAY_SIZE(sh7780_dmae1_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct resource sh7780_dmae0_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc808020,
+		.end	= 0xfc80808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfc809000,
+		.end	= 0xfc80900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* Real DMA error IRQ is 38, and channel IRQs are 34-37, 44-45 */
+		.start	= 34,
+		.end	= 34,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct resource sh7780_dmae1_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc818020,
+		.end	= 0xfc81808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DMAC1 has no DMARS */
+	{
+		/* Real DMA error IRQ is 38, and channel IRQs are 46-47, 92-95 */
+		.start	= 46,
+		.end	= 46,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
 };
 
-static struct platform_device dma_device = {
+static struct platform_device dma0_device = {
 	.name           = "sh-dma-engine",
-	.id             = -1,
+	.id             = 0,
+	.resource	= sh7780_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7780_dmae0_resources),
 	.dev            = {
-		.platform_data  = &dma_platform_data,
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7780_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7780_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma1_platform_data,
 	},
 };
 
@@ -269,7 +369,8 @@ static struct platform_device *sh7780_devices[] __initdata = {
 	&tmu4_device,
 	&tmu5_device,
 	&rtc_device,
-	&dma_device,
+	&dma0_device,
+	&dma1_device,
 };
 
 static int __init sh7780_devices_setup(void)
@@ -461,17 +562,17 @@ static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ7-0 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	/* select IRL mode for IRL3-0 + IRL7-4 */
-	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
 
 	/* disable holding function, ie enable "SH-4 Mode" */
-	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
 
 	register_intc_controller(&intc_desc);
 }
@@ -481,27 +582,27 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ:
 		/* select IRQ mode for IRL3-0 + IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
 		register_intc_controller(&intc_irq_desc);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl7654_desc);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_irl3210_desc);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index f685b9b..c9a572b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -13,16 +13,18 @@
 #include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
-#include <asm/dma-sh.h>
+
 #include <asm/mmzone.h>
 
+#include <cpu/dma-register.h>
+
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffea0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 40, 40, 40, 40 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif0_device = {
@@ -38,7 +40,6 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 44, 44, 44, 44 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif1_device = {
@@ -54,7 +55,6 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 60, 60, 60, 60 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif2_device = {
@@ -70,7 +70,6 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 61, 61, 61, 61 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif3_device = {
@@ -86,7 +85,6 @@ static struct plat_sci_port scif4_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 62, 62, 62, 62 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif4_device = {
@@ -102,7 +100,6 @@ static struct plat_sci_port scif5_platform_data = {
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.irqs		= { 63, 63, 63, 63 },
-	.clk		= "scif_fck",
 };
 
 static struct platform_device scif5_device = {
@@ -114,16 +111,13 @@ static struct platform_device scif5_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu012_fck",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -145,16 +139,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu012_fck",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -176,15 +167,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu012_fck",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -206,15 +194,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "tmu345_fck",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffdc0008,
 		.end	= 0xffdc0013,
 		.flags	= IORESOURCE_MEM,
@@ -236,15 +221,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "tmu345_fck",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffdc0014,
 		.end	= 0xffdc001f,
 		.flags	= IORESOURCE_MEM,
@@ -266,15 +248,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "tmu345_fck",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffdc0020,
 		.end	= 0xffdc002b,
 		.flags	= IORESOURCE_MEM,
@@ -295,15 +274,131 @@ static struct platform_device tmu5_device = {
 	.num_resources	= ARRAY_SIZE(tmu5_resources),
 };
 
-static struct sh_dmae_pdata dma_platform_data = {
-	.mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+/* DMA */
+static const struct sh_dmae_channel sh7785_dmae0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const struct sh_dmae_channel sh7785_dmae1_channels[] = {
+	{
+		.offset = 0,
+	}, {
+		.offset = 0x10,
+	}, {
+		.offset = 0x20,
+	}, {
+		.offset = 0x30,
+	}, {
+		.offset = 0x50,
+	}, {
+		.offset = 0x60,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= sh7785_dmae0_channels,
+	.channel_num	= ARRAY_SIZE(sh7785_dmae0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+static struct sh_dmae_pdata dma1_platform_data = {
+	.channel	= sh7785_dmae1_channels,
+	.channel_num	= ARRAY_SIZE(sh7785_dmae1_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
 };
 
-static struct platform_device dma_device = {
+static struct resource sh7785_dmae0_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfc808020,
+		.end	= 0xfc80808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* DMARSx */
+		.start	= 0xfc809000,
+		.end	= 0xfc80900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* Real DMA error IRQ is 39, and channel IRQs are 33-38 */
+		.start	= 33,
+		.end	= 33,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct resource sh7785_dmae1_resources[] = {
+	[0] = {
+		/* Channel registers and DMAOR */
+		.start	= 0xfcc08020,
+		.end	= 0xfcc0808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DMAC1 has no DMARS */
+	{
+		/* Real DMA error IRQ is 58, and channel IRQs are 52-57 */
+		.start	= 52,
+		.end	= 52,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE,
+	},
+};
+
+static struct platform_device dma0_device = {
 	.name           = "sh-dma-engine",
-	.id             = -1,
+	.id             = 0,
+	.resource	= sh7785_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7785_dmae0_resources),
 	.dev            = {
-		.platform_data  = &dma_platform_data,
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7785_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7785_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma1_platform_data,
 	},
 };
 
@@ -320,7 +415,8 @@ static struct platform_device *sh7785_devices[] __initdata = {
 	&tmu3_device,
 	&tmu4_device,
 	&tmu5_device,
-	&dma_device,
+	&dma0_device,
+	&dma1_device,
 };
 
 static int __init sh7785_devices_setup(void)
@@ -541,17 +637,17 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ3-0 + IRQ7-4 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	/* select IRL mode for IRL3-0 + IRL7-4 */
-	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
 
 	/* disable holding function, ie enable "SH-4 Mode" */
-	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) | 0x00200000, INTC_ICR0);
 
 	register_intc_controller(&intc_desc);
 }
@@ -561,32 +657,32 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ7654:
 		/* select IRQ mode for IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq4567);
 		break;
 	case IRQ_MODE_IRQ3210:
 		/* select IRQ mode for IRL3-0 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq0123);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl4567);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl0123);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 7167348..8797723 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -1,7 +1,7 @@
 /*
  * SH7786 Setup
  *
- * Copyright (C) 2009  Renesas Solutions Corp.
+ * Copyright (C) 2009 - 2010  Renesas Solutions Corp.
  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
  * Paul Mundt <paul.mundt@renesas.com>
  *
@@ -21,6 +21,9 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <linux/sh_timer.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_intc.h>
+#include <cpu/dma-register.h>
 #include <asm/mmzone.h>
 
 static struct plat_sci_port scif0_platform_data = {
@@ -117,16 +120,13 @@ static struct platform_device scif5_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffd80008,
 		.end	= 0xffd80013,
 		.flags	= IORESOURCE_MEM,
@@ -148,16 +148,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffd80014,
 		.end	= 0xffd8001f,
 		.flags	= IORESOURCE_MEM,
@@ -179,15 +176,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffd80020,
 		.end	= 0xffd8002f,
 		.flags	= IORESOURCE_MEM,
@@ -209,15 +203,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffda0008,
 		.end	= 0xffda0013,
 		.flags	= IORESOURCE_MEM,
@@ -239,15 +230,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffda0014,
 		.end	= 0xffda001f,
 		.flags	= IORESOURCE_MEM,
@@ -269,15 +257,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffda0020,
 		.end	= 0xffda002b,
 		.flags	= IORESOURCE_MEM,
@@ -299,15 +284,12 @@ static struct platform_device tmu5_device = {
 };
 
 static struct sh_timer_config tmu6_platform_data = {
-	.name = "TMU6",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu6_resources[] = {
 	[0] = {
-		.name	= "TMU6",
 		.start	= 0xffdc0008,
 		.end	= 0xffdc0013,
 		.flags	= IORESOURCE_MEM,
@@ -329,15 +311,12 @@ static struct platform_device tmu6_device = {
 };
 
 static struct sh_timer_config tmu7_platform_data = {
-	.name = "TMU7",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu7_resources[] = {
 	[0] = {
-		.name	= "TMU7",
 		.start	= 0xffdc0014,
 		.end	= 0xffdc001f,
 		.flags	= IORESOURCE_MEM,
@@ -359,15 +338,12 @@ static struct platform_device tmu7_device = {
 };
 
 static struct sh_timer_config tmu8_platform_data = {
-	.name = "TMU8",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu8_resources[] = {
 	[0] = {
-		.name	= "TMU8",
 		.start	= 0xffdc0020,
 		.end	= 0xffdc002b,
 		.flags	= IORESOURCE_MEM,
@@ -389,15 +365,12 @@ static struct platform_device tmu8_device = {
 };
 
 static struct sh_timer_config tmu9_platform_data = {
-	.name = "TMU9",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu9_resources[] = {
 	[0] = {
-		.name	= "TMU9",
 		.start	= 0xffde0008,
 		.end	= 0xffde0013,
 		.flags	= IORESOURCE_MEM,
@@ -419,15 +392,12 @@ static struct platform_device tmu9_device = {
 };
 
 static struct sh_timer_config tmu10_platform_data = {
-	.name = "TMU10",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu10_resources[] = {
 	[0] = {
-		.name	= "TMU10",
 		.start	= 0xffde0014,
 		.end	= 0xffde001f,
 		.flags	= IORESOURCE_MEM,
@@ -449,15 +419,12 @@ static struct platform_device tmu10_device = {
 };
 
 static struct sh_timer_config tmu11_platform_data = {
-	.name = "TMU11",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu11_resources[] = {
 	[0] = {
-		.name	= "TMU11",
 		.start	= 0xffde0020,
 		.end	= 0xffde002b,
 		.flags	= IORESOURCE_MEM,
@@ -478,6 +445,83 @@ static struct platform_device tmu11_device = {
 	.num_resources	= ARRAY_SIZE(tmu11_resources),
 };
 
+static const struct sh_dmae_channel dmac0_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma0_platform_data = {
+	.channel	= dmac0_channels,
+	.channel_num	= ARRAY_SIZE(dmac0_channels),
+	.ts_low_shift	= CHCR_TS_LOW_SHIFT,
+	.ts_low_mask	= CHCR_TS_LOW_MASK,
+	.ts_high_shift	= CHCR_TS_HIGH_SHIFT,
+	.ts_high_mask	= CHCR_TS_HIGH_MASK,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_INIT,
+};
+
+/* Resource order important! */
+static struct resource dmac0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		/* DMA error IRQ */
+		.start	= evt2irq(0x5c0),
+		.end	= evt2irq(0x5c0),
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		/* IRQ for channels 0-5 */
+		.start	= evt2irq(0x500),
+		.end	= evt2irq(0x5a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= dmac0_resources,
+	.num_resources	= ARRAY_SIZE(dmac0_resources),
+	.dev		= {
+		.platform_data	= &dma0_platform_data,
+	},
+};
+
 static struct resource usb_ohci_resources[] = {
 	[0] = {
 		.start	= 0xffe70400,
@@ -525,10 +569,10 @@ static struct platform_device *sh7786_early_devices[] __initdata = {
 };
 
 static struct platform_device *sh7786_devices[] __initdata = {
+	&dma0_device,
 	&usb_ohci_device,
 };
 
-
 /*
  * Please call this function if your platform board
  * use external clock for USB
@@ -536,6 +580,7 @@ static struct platform_device *sh7786_devices[] __initdata = {
 #define USBCTL0		0xffe70858
 #define CLOCK_MODE_MASK 0xffffff7f
 #define EXT_CLOCK_MODE  0x00000080
+
 void __init sh7786_usb_use_exclock(void)
 {
 	u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
@@ -553,6 +598,7 @@ void __init sh7786_usb_use_exclock(void)
 #define PLL_ENB		0x00000002
 #define PHY_RST		0x00000004
 #define ACT_PLL_STATUS	0xc0000000
+
 static void __init sh7786_usb_setup(void)
 {
 	int i = 1000000;
@@ -708,9 +754,19 @@ static struct intc_vect vectors[] __initdata = {
 #define INTMSK2		0xfe410068
 #define INTMSKCLR2	0xfe41006c
 
+#define INTDISTCR0	0xfe4100b0
+#define INTDISTCR1	0xfe4100b4
+#define INTACK		0xfe4100b8
+#define INTACKCLR	0xfe4100bc
+#define INT2DISTCR0	0xfe410900
+#define INT2DISTCR1	0xfe410904
+#define INT2DISTCR2	0xfe410908
+#define INT2DISTCR3	0xfe41090c
+
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ CnINTMSK0, CnINTMSKCLR0, 32,
-	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 },
+	    INTC_SMP_BALANCING(INTDISTCR0) },
 	{ INTMSK2, INTMSKCLR2, 32,
 	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
 	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
@@ -722,7 +778,8 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
 	{ CnINT2MSKR0, CnINT2MSKCR0 , 32,
 	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT } },
+	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT },
+	    INTC_SMP_BALANCING(INT2DISTCR0) },
 	{ CnINT2MSKR1, CnINT2MSKCR1, 32,
 	  { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
 	    DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
@@ -731,14 +788,14 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	    HPB_0, HPB_1, HPB_2,
 	    SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
 	    SCIF1,
-	    TMU2, TMU3, 0, } },
+	    TMU2, TMU3, 0, }, INTC_SMP_BALANCING(INT2DISTCR1) },
 	{ CnINT2MSKR2, CnINT2MSKCR2, 32,
 	  { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
 	    Eth_0, Eth_1,
 	    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	    PCIeC0_0, PCIeC0_1, PCIeC0_2,
 	    PCIeC1_0, PCIeC1_1, PCIeC1_2,
-	    USB, 0, 0 } },
+	    USB, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR2) },
 	{ CnINT2MSKR3, CnINT2MSKCR3, 32,
 	  { 0, 0, 0, 0, 0, 0,
 	    I2C0, I2C1,
@@ -747,7 +804,7 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	    HAC0, HAC1,
 	    FLCTL, 0,
 	    HSPI, GPIO0, GPIO1, Thermal,
-	    0, 0, 0, 0, 0, 0, 0, 0 } },
+	    0, 0, 0, 0, 0, 0, 0, 0 }, INTC_SMP_BALANCING(INT2DISTCR3) },
 };
 
 static struct intc_prio_reg prio_registers[] __initdata = {
@@ -863,20 +920,34 @@ static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
 #define INTC_INTMSK2	INTMSK2
 #define INTC_INTMSKCLR1	CnINTMSKCLR1
 #define INTC_INTMSKCLR2	INTMSKCLR2
+#define INTC_USERIMASK	0xfe411000
+
+#ifdef CONFIG_INTC_BALANCING
+unsigned int irq_lookup(unsigned int irq)
+{
+	return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
+}
+
+void irq_finish(unsigned int irq)
+{
+	__raw_writel(irq2evt(irq), INTACKCLR);
+}
+#endif
 
 void __init plat_irq_setup(void)
 {
 	/* disable IRQ3-0 + IRQ7-4 */
-	ctrl_outl(0xff000000, INTC_INTMSK0);
+	__raw_writel(0xff000000, INTC_INTMSK0);
 
 	/* disable IRL3-0 + IRL7-4 */
-	ctrl_outl(0xc0000000, INTC_INTMSK1);
-	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+	__raw_writel(0xc0000000, INTC_INTMSK1);
+	__raw_writel(0xfffefffe, INTC_INTMSK2);
 
 	/* select IRL mode for IRL3-0 + IRL7-4 */
-	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+	__raw_writel(__raw_readl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
 
 	register_intc_controller(&intc_desc);
+	register_intc_userimask(INTC_USERIMASK);
 }
 
 void __init plat_irq_setup_pins(int mode)
@@ -884,32 +955,32 @@ void __init plat_irq_setup_pins(int mode)
 	switch (mode) {
 	case IRQ_MODE_IRQ7654:
 		/* select IRQ mode for IRL7-4 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00400000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq4567);
 		break;
 	case IRQ_MODE_IRQ3210:
 		/* select IRQ mode for IRL3-0 */
-		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		__raw_writel(__raw_readl(INTC_ICR0) | 0x00800000, INTC_ICR0);
 		register_intc_controller(&intc_desc_irq0123);
 		break;
 	case IRQ_MODE_IRL7654:
 		/* enable IRL7-4 but don't provide any masking */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
-		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x0000fffe, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL3210:
 		/* enable IRL0-3 but don't provide any masking */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
-		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0xfffe0000, INTC_INTMSKCLR2);
 		break;
 	case IRQ_MODE_IRL7654_MASK:
 		/* enable IRL7-4 and mask using cpu intc controller */
-		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		__raw_writel(0x40000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl4567);
 		break;
 	case IRQ_MODE_IRL3210_MASK:
 		/* enable IRL0-3 and mask using cpu intc controller */
-		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		__raw_writel(0x80000000, INTC_INTMSKCLR1);
 		register_intc_controller(&intc_desc_irl0123);
 		break;
 	default:
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 780ba17..9158bc5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -70,16 +70,13 @@ static struct platform_device scif2_device = {
 };
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= 0xffc10008,
 		.end	= 0xffc10013,
 		.flags	= IORESOURCE_MEM,
@@ -101,16 +98,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= 0xffc10014,
 		.end	= 0xffc1001f,
 		.flags	= IORESOURCE_MEM,
@@ -132,15 +126,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= 0xffc10020,
 		.end	= 0xffc1002f,
 		.flags	= IORESOURCE_MEM,
@@ -162,15 +153,12 @@ static struct platform_device tmu2_device = {
 };
 
 static struct sh_timer_config tmu3_platform_data = {
-	.name = "TMU3",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu3_resources[] = {
 	[0] = {
-		.name	= "TMU3",
 		.start	= 0xffc20008,
 		.end	= 0xffc20013,
 		.flags	= IORESOURCE_MEM,
@@ -192,15 +180,12 @@ static struct platform_device tmu3_device = {
 };
 
 static struct sh_timer_config tmu4_platform_data = {
-	.name = "TMU4",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu4_resources[] = {
 	[0] = {
-		.name	= "TMU4",
 		.start	= 0xffc20014,
 		.end	= 0xffc2001f,
 		.flags	= IORESOURCE_MEM,
@@ -222,15 +207,12 @@ static struct platform_device tmu4_device = {
 };
 
 static struct sh_timer_config tmu5_platform_data = {
-	.name = "TMU5",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu5_resources[] = {
 	[0] = {
-		.name	= "TMU5",
 		.start	= 0xffc20020,
 		.end	= 0xffc2002b,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 5863e0c..de865ca 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -1,7 +1,7 @@
 /*
  * SH-X3 SMP
  *
- *  Copyright (C) 2007 - 2008  Paul Mundt
+ *  Copyright (C) 2007 - 2010  Paul Mundt
  *  Copyright (C) 2007  Magnus Damm
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -9,16 +9,22 @@
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/cpumask.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/sections.h>
 
 #define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
 #define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
 
 #define STBCR_MSTP	0x00000001
 #define STBCR_RESET	0x00000002
+#define STBCR_SLEEP	0x00000004
 #define STBCR_LTSLP	0x80000000
 
 static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
@@ -37,7 +43,7 @@ static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-void __init plat_smp_setup(void)
+static void shx3_smp_setup(void)
 {
 	unsigned int cpu = 0;
 	int i, num;
@@ -63,7 +69,7 @@ void __init plat_smp_setup(void)
         printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
 }
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void shx3_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
@@ -72,13 +78,19 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
-		request_irq(104 + i, ipi_interrupt_handler, IRQF_DISABLED,
-			    "IPI", (void *)(long)i);
+		request_irq(104 + i, ipi_interrupt_handler,
+			    IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
 }
 
-void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
+static void shx3_start_cpu(unsigned int cpu, unsigned long entry_point)
 {
-	__raw_writel(entry_point, RESET_REG(cpu));
+	if (__in_29bit_mode())
+		__raw_writel(entry_point, RESET_REG(cpu));
+	else
+		__raw_writel(virt_to_phys(entry_point), RESET_REG(cpu));
 
 	if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
 		__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
@@ -90,12 +102,12 @@ void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
 	__raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
 }
 
-int plat_smp_processor_id(void)
+static unsigned int shx3_smp_processor_id(void)
 {
 	return __raw_readl(0xff000048); /* CPIDR */
 }
 
-void plat_send_ipi(unsigned int cpu, unsigned int message)
+static void shx3_send_ipi(unsigned int cpu, unsigned int message)
 {
 	unsigned long addr = 0xfe410070 + (cpu * 4);
 
@@ -103,3 +115,52 @@ void plat_send_ipi(unsigned int cpu, unsigned int message)
 
 	__raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
 }
+
+static void shx3_update_boot_vector(unsigned int cpu)
+{
+	__raw_writel(STBCR_MSTP, STBCR_REG(cpu));
+	while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+		cpu_relax();
+	__raw_writel(STBCR_RESET, STBCR_REG(cpu));
+}
+
+static int __cpuinit
+shx3_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned int)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		shx3_update_boot_vector(cpu);
+		break;
+	case CPU_ONLINE:
+		pr_info("CPU %u is now online\n", cpu);
+		break;
+	case CPU_DEAD:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata shx3_cpu_notifier = {
+	.notifier_call		= shx3_cpu_callback,
+};
+
+static int __cpuinit register_shx3_cpu_notifier(void)
+{
+	register_hotcpu_notifier(&shx3_cpu_notifier);
+	return 0;
+}
+late_initcall(register_shx3_cpu_notifier);
+
+struct plat_smp_ops shx3_smp_ops = {
+	.smp_setup		= shx3_smp_setup,
+	.prepare_cpus		= shx3_prepare_cpus,
+	.start_cpu		= shx3_start_cpu,
+	.smp_processor_id	= shx3_smp_processor_id,
+	.send_ipi		= shx3_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
diff --git a/arch/sh/kernel/cpu/sh4a/ubc.c b/arch/sh/kernel/cpu/sh4a/ubc.c
new file mode 100644
index 0000000..efb2745
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/ubc.c
@@ -0,0 +1,133 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/ubc.c
+ *
+ * On-chip UBC support for SH-4A CPUs.
+ *
+ * Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/hw_breakpoint.h>
+
+#define UBC_CBR(idx)	(0xff200000 + (0x20 * idx))
+#define UBC_CRR(idx)	(0xff200004 + (0x20 * idx))
+#define UBC_CAR(idx)	(0xff200008 + (0x20 * idx))
+#define UBC_CAMR(idx)	(0xff20000c + (0x20 * idx))
+
+#define UBC_CCMFR	0xff200600
+#define UBC_CBCR	0xff200620
+
+/* CRR */
+#define UBC_CRR_PCB	(1 << 1)
+#define UBC_CRR_BIE	(1 << 0)
+
+/* CBR */
+#define UBC_CBR_CE	(1 << 0)
+
+static struct sh_ubc sh4a_ubc;
+
+static void sh4a_ubc_enable(struct arch_hw_breakpoint *info, int idx)
+{
+	__raw_writel(UBC_CBR_CE | info->len | info->type, UBC_CBR(idx));
+	__raw_writel(info->address, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_disable(struct arch_hw_breakpoint *info, int idx)
+{
+	__raw_writel(0, UBC_CBR(idx));
+	__raw_writel(0, UBC_CAR(idx));
+}
+
+static void sh4a_ubc_enable_all(unsigned long mask)
+{
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		if (mask & (1 << i))
+			__raw_writel(__raw_readl(UBC_CBR(i)) | UBC_CBR_CE,
+				     UBC_CBR(i));
+}
+
+static void sh4a_ubc_disable_all(void)
+{
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		__raw_writel(__raw_readl(UBC_CBR(i)) & ~UBC_CBR_CE,
+			     UBC_CBR(i));
+}
+
+static unsigned long sh4a_ubc_active_mask(void)
+{
+	unsigned long active = 0;
+	int i;
+
+	for (i = 0; i < sh4a_ubc.num_events; i++)
+		if (__raw_readl(UBC_CBR(i)) & UBC_CBR_CE)
+			active |= (1 << i);
+
+	return active;
+}
+
+static unsigned long sh4a_ubc_triggered_mask(void)
+{
+	return __raw_readl(UBC_CCMFR);
+}
+
+static void sh4a_ubc_clear_triggered_mask(unsigned long mask)
+{
+	__raw_writel(__raw_readl(UBC_CCMFR) & ~mask, UBC_CCMFR);
+}
+
+static struct sh_ubc sh4a_ubc = {
+	.name			= "SH-4A",
+	.num_events		= 2,
+	.trap_nr		= 0x1e0,
+	.enable			= sh4a_ubc_enable,
+	.disable		= sh4a_ubc_disable,
+	.enable_all		= sh4a_ubc_enable_all,
+	.disable_all		= sh4a_ubc_disable_all,
+	.active_mask		= sh4a_ubc_active_mask,
+	.triggered_mask		= sh4a_ubc_triggered_mask,
+	.clear_triggered_mask	= sh4a_ubc_clear_triggered_mask,
+};
+
+static int __init sh4a_ubc_init(void)
+{
+	struct clk *ubc_iclk = clk_get(NULL, "ubc0");
+	int i;
+
+	/*
+	 * The UBC MSTP bit is optional, as not all platforms will have
+	 * it. Just ignore it if we can't find it.
+	 */
+	if (IS_ERR(ubc_iclk))
+		ubc_iclk = NULL;
+
+	clk_enable(ubc_iclk);
+
+	__raw_writel(0, UBC_CBCR);
+
+	for (i = 0; i < sh4a_ubc.num_events; i++) {
+		__raw_writel(0, UBC_CAMR(i));
+		__raw_writel(0, UBC_CBR(i));
+
+		__raw_writel(UBC_CRR_BIE | UBC_CRR_PCB, UBC_CRR(i));
+
+		/* dummy read for write posting */
+		(void)__raw_readl(UBC_CRR(i));
+	}
+
+	clk_disable(ubc_iclk);
+
+	sh4a_ubc.clk = ubc_iclk;
+
+	return register_sh_ubc(&sh4a_ubc);
+}
+arch_initcall(sh4a_ubc_init);
diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c
index 7f864eb..9cfc19b 100644
--- a/arch/sh/kernel/cpu/sh5/clock-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/clock-sh5.c
@@ -24,7 +24,7 @@ static unsigned long cprc_base;
 
 static void master_clk_init(struct clk *clk)
 {
-	int idx = (ctrl_inl(cprc_base + 0x00) >> 6) & 0x0007;
+	int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007;
 	clk->rate *= ifc_table[idx];
 }
 
@@ -34,7 +34,7 @@ static struct clk_ops sh5_master_clk_ops = {
 
 static unsigned long module_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(cprc_base) >> 12) & 0x0007;
+	int idx = (__raw_readw(cprc_base) >> 12) & 0x0007;
 	return clk->parent->rate / ifc_table[idx];
 }
 
@@ -44,7 +44,7 @@ static struct clk_ops sh5_module_clk_ops = {
 
 static unsigned long bus_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(cprc_base) >> 3) & 0x0007;
+	int idx = (__raw_readw(cprc_base) >> 3) & 0x0007;
 	return clk->parent->rate / ifc_table[idx];
 }
 
@@ -54,7 +54,7 @@ static struct clk_ops sh5_bus_clk_ops = {
 
 static unsigned long cpu_clk_recalc(struct clk *clk)
 {
-	int idx = (ctrl_inw(cprc_base) & 0x0007);
+	int idx = (__raw_readw(cprc_base) & 0x0007);
 	return clk->parent->rate / ifc_table[idx];
 }
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 8f13f73..6b80295 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -187,7 +187,7 @@ trap_jtable:
 	.rept 6
 		.long do_exception_error	/* 0x880 - 0x920 */
 	.endr
-	.long	do_software_break_point	/* 0x940 */
+	.long	breakpoint_trap_handler	/* 0x940 */
 	.long	do_exception_error		/* 0x960 */
 	.long	do_single_step		/* 0x980 */
 
@@ -1124,7 +1124,7 @@ fpu_error_or_IRQA:
 	pta	its_IRQ, tr0
 	beqi/l	r4, EVENT_INTERRUPT, tr0
 #ifdef CONFIG_SH_FPU
-	movi	do_fpu_state_restore, r6
+	movi	fpu_state_restore_trap_handler, r6
 #else
 	movi	do_exception_error, r6
 #endif
@@ -1135,7 +1135,7 @@ fpu_error_or_IRQB:
 	pta	its_IRQ, tr0
 	beqi/l	r4, EVENT_INTERRUPT, tr0
 #ifdef CONFIG_SH_FPU
-	movi	do_fpu_state_restore, r6
+	movi	fpu_state_restore_trap_handler, r6
 #else
 	movi	do_exception_error, r6
 #endif
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 4648cce..4b3bb35 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -15,24 +15,6 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <asm/processor.h>
-#include <asm/user.h>
-#include <asm/io.h>
-#include <asm/fpu.h>
-
-/*
- * Initially load the FPU with signalling NANS.  This bit pattern
- * has the property that no matter whether considered as single or as
- * double precision, it still represents a signalling NAN.
- */
-#define sNAN64		0xFFFFFFFFFFFFFFFFULL
-#define sNAN32		0xFFFFFFFFUL
-
-static union sh_fpu_union init_fpuregs = {
-	.hard = {
-		.fp_regs = { [0 ... 63] = sNAN32 },
-		.fpscr = FPSCR_INIT
-	}
-};
 
 void save_fpu(struct task_struct *tsk)
 {
@@ -72,12 +54,11 @@ void save_fpu(struct task_struct *tsk)
 		     "fgetscr   fr63\n\t"
 		     "fst.s     %0, (32*8), fr63\n\t"
 		: /* no output */
-		: "r" (&tsk->thread.fpu.hard)
+		: "r" (&tsk->thread.xstate->hardfpu)
 		: "memory");
 }
 
-static inline void
-fpload(struct sh_fpu_hard_struct *fpregs)
+void restore_fpu(struct task_struct *tsk)
 {
 	asm volatile("fld.p     %0, (0*8), fp0\n\t"
 		     "fld.p     %0, (1*8), fp2\n\t"
@@ -116,16 +97,11 @@ fpload(struct sh_fpu_hard_struct *fpregs)
 
 		     "fld.p     %0, (31*8), fp62\n\t"
 		: /* no output */
-		: "r" (fpregs) );
-}
-
-void fpinit(struct sh_fpu_hard_struct *fpregs)
-{
-	*fpregs = init_fpuregs.hard;
+		: "r" (&tsk->thread.xstate->hardfpu)
+		: "memory");
 }
 
-asmlinkage void
-do_fpu_error(unsigned long ex, struct pt_regs *regs)
+asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 
@@ -133,35 +109,6 @@ do_fpu_error(unsigned long ex, struct pt_regs *regs)
 
 	tsk->thread.trap_no = 11;
 	tsk->thread.error_code = 0;
-	force_sig(SIGFPE, tsk);
-}
-
-
-asmlinkage void
-do_fpu_state_restore(unsigned long ex, struct pt_regs *regs)
-{
-	void die(const char *str, struct pt_regs *regs, long err);
-
-	if (! user_mode(regs))
-		die("FPU used in kernel", regs, ex);
 
-	regs->sr &= ~SR_FD;
-
-	if (last_task_used_math == current)
-		return;
-
-	enable_fpu();
-	if (last_task_used_math != NULL)
-		/* Other processes fpu state, save away */
-		save_fpu(last_task_used_math);
-
-        last_task_used_math = current;
-        if (used_math()) {
-                fpload(&current->thread.fpu.hard);
-        } else {
-		/* First time FPU user.  */
-		fpload(&init_fpuregs.hard);
-                set_used_math();
-        }
-	disable_fpu();
+	force_sig(SIGFPE, tsk);
 }
diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c
index 521d05b..9e88240 100644
--- a/arch/sh/kernel/cpu/sh5/probe.c
+++ b/arch/sh/kernel/cpu/sh5/probe.c
@@ -17,7 +17,7 @@
 #include <asm/cache.h>
 #include <asm/tlb.h>
 
-int __init detect_cpu_and_cache_system(void)
+void __cpuinit cpu_probe(void)
 {
 	unsigned long long cir;
 
@@ -72,6 +72,4 @@ int __init detect_cpu_and_cache_system(void)
 
 	/* Setup some I/D TLB defaults */
 	sh64_tlb_init();
-
-	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index e7a3c1e..d910666 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -68,16 +68,13 @@ static struct platform_device rtc_device = {
 #define TMU2_BASE	(TMU_BASE + 0x8 + (0xc * 0x2))
 
 static struct sh_timer_config tmu0_platform_data = {
-	.name = "TMU0",
 	.channel_offset = 0x04,
 	.timer_bit = 0,
-	.clk = "peripheral_clk",
 	.clockevent_rating = 200,
 };
 
 static struct resource tmu0_resources[] = {
 	[0] = {
-		.name	= "TMU0",
 		.start	= TMU0_BASE,
 		.end	= TMU0_BASE + 0xc - 1,
 		.flags	= IORESOURCE_MEM,
@@ -99,16 +96,13 @@ static struct platform_device tmu0_device = {
 };
 
 static struct sh_timer_config tmu1_platform_data = {
-	.name = "TMU1",
 	.channel_offset = 0x10,
 	.timer_bit = 1,
-	.clk = "peripheral_clk",
 	.clocksource_rating = 200,
 };
 
 static struct resource tmu1_resources[] = {
 	[0] = {
-		.name	= "TMU1",
 		.start	= TMU1_BASE,
 		.end	= TMU1_BASE + 0xc - 1,
 		.flags	= IORESOURCE_MEM,
@@ -130,15 +124,12 @@ static struct platform_device tmu1_device = {
 };
 
 static struct sh_timer_config tmu2_platform_data = {
-	.name = "TMU2",
 	.channel_offset = 0x1c,
 	.timer_bit = 2,
-	.clk = "peripheral_clk",
 };
 
 static struct resource tmu2_resources[] = {
 	[0] = {
-		.name	= "TMU2",
 		.start	= TMU2_BASE,
 		.end	= TMU2_BASE + 0xc - 1,
 		.flags	= IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index ca029a4..e559687 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -33,7 +33,8 @@ ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
 #define SUSP_MODE_SLEEP		(SUSP_SH_SLEEP)
 #define SUSP_MODE_SLEEP_SF	(SUSP_SH_SLEEP | SUSP_SH_SF)
 #define SUSP_MODE_STANDBY_SF	(SUSP_SH_STANDBY | SUSP_SH_SF)
-#define SUSP_MODE_RSTANDBY	(SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY_SF \
+	(SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_REGS | SUSP_SH_SF)
  /*
   * U-standby mode is unsupported since it needs bootloader hacks
   */
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index e9dd7fa..e6aac65 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -48,8 +48,48 @@ ENTRY(sh_mobile_sleep_enter_start)
 	stc	sr, r0
 	mov.l	r0, @(SH_SLEEP_SR, r5)
 
-	/* save sp */
+	/* save general purpose registers to stack if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_regs_save
+
+	sts.l	pr, @-r15
+	mov.l	r14, @-r15
+	mov.l	r13, @-r15
+	mov.l	r12, @-r15
+	mov.l	r11, @-r15
+	mov.l	r10, @-r15
+	mov.l	r9, @-r15
+	mov.l	r8, @-r15
+
+	/* make sure bank0 is selected, save low registers */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch to bank 1, save low registers */
+	mov.l	rb_bit, r10
+	bsr	set_sr
+	 mov	#-1, r9
+
+	bsr	save_low_regs
+	 nop
+
+	/* switch back to bank 0 */
+	mov.l	rb_bit, r9
+	not	r9, r9
+	bsr	set_sr
+	 mov	#0, r10
+
+skip_regs_save:
+
+	/* save sp, also set to internal ram */
 	mov.l	r15, @(SH_SLEEP_SP, r5)
+	mov	r5, r15
 
 	/* save stbcr */
 	bsr     save_register
@@ -60,7 +100,7 @@ ENTRY(sh_mobile_sleep_enter_start)
 	tst	#SUSP_SH_MMU, r0
 	bt	skip_mmu_save_disable
 
-       /* save mmu state */
+	/* save mmu state */
 	bsr	save_register
 	 mov	#SH_SLEEP_REG_PTEH, r0
 
@@ -177,6 +217,29 @@ get_register:
 	mov.l	@(r0, r5), r0
 	rts
 	 nop
+
+set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+save_low_regs:
+	mov.l	r7, @-r15
+	mov.l	r6, @-r15
+	mov.l	r5, @-r15
+	mov.l	r4, @-r15
+	mov.l	r3, @-r15
+	mov.l	r2, @-r15
+	mov.l	r1, @-r15
+	rts
+	 mov.l	r0, @-r15
+
+	.balign 4
+rb_bit:	.long	0x20000000 ! RB=1
+
 ENTRY(sh_mobile_sleep_enter_end)
 
 	.balign 4
@@ -270,6 +333,40 @@ skip_restore_sf:
 	icbi	@r0
 
 skip_restore_mmu:
+
+	/* restore general purpose registers if needed */
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_REGS, r0
+	bt	skip_restore_regs
+
+	/* switch to bank 1, restore low registers */
+	mov.l	_rb_bit, r10
+	bsr	_set_sr
+	 mov	#-1, r9
+
+	bsr	restore_low_regs
+	 nop
+
+	/* switch to bank0, restore low registers */
+	mov.l	_rb_bit, r9
+	not	r9, r9
+	bsr	_set_sr
+	 mov	#0, r10
+
+	bsr	restore_low_regs
+	 nop
+
+	/* restore the rest of the registers */
+	mov.l	@r15+, r8
+	mov.l	@r15+, r9
+	mov.l	@r15+, r10
+	mov.l	@r15+, r11
+	mov.l	@r15+, r12
+	mov.l	@r15+, r13
+	mov.l	@r15+, r14
+	lds.l	@r15+, pr
+
+skip_restore_regs:
 	rte
 	 nop
 
@@ -283,6 +380,26 @@ restore_register:
 	rts
 	 nop
 
+_set_sr:
+	stc	sr, r8
+	and	r9, r8
+	or	r10, r8
+	ldc	r8, sr
+	rts
+	 nop
+
+restore_low_regs:
+	mov.l	@r15+, r0
+	mov.l	@r15+, r1
+	mov.l	@r15+, r2
+	mov.l	@r15+, r3
+	mov.l	@r15+, r4
+	mov.l	@r15+, r5
+	mov.l	@r15+, r6
+	rts
+	 mov.l	@r15+, r7
+
 	.balign 4
+_rb_bit:	.long	0x20000000 ! RB=1
 1:	.long	~0x7ff
 ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index dce4f3f..0ffface 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -48,7 +48,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy,
 		return -ENODEV;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	BUG_ON(smp_processor_id() != cpu);
 
@@ -66,7 +66,7 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy,
 	freqs.flags	= 0;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 	clk_set_rate(cpuclk, freq);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
index 95d2162..37c97d4 100644
--- a/arch/sh/kernel/crash_dump.c
+++ b/arch/sh/kernel/crash_dump.c
@@ -4,7 +4,6 @@
  *	Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
  *	Copyright (C) IBM Corporation, 2004. All rights reserved
  */
-
 #include <linux/errno.h>
 #include <linux/crash_dump.h>
 #include <linux/io.h>
@@ -13,6 +12,25 @@
 /* Stores the physical address of elf header of crash image. */
 unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ *
+ * elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &arg);
+
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+
 /**
  * copy_oldmem_page - copy one page from "oldmem"
  * @pfn: page frame number to be copied
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
index 5917413..7a1b46f 100644
--- a/arch/sh/kernel/debugtraps.S
+++ b/arch/sh/kernel/debugtraps.S
@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 
 #if !defined(CONFIG_KGDB)
-#define breakpoint_trap_handler		debug_trap_handler
 #define singlestep_trap_handler		debug_trap_handler
 #endif
 
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 3576b70..49c09c7 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -22,6 +22,8 @@
 #include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/ftrace.h>
+#include <linux/module.h>
+#include <linux/slab.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
@@ -39,14 +41,16 @@ static mempool_t *dwarf_frame_pool;
 static struct kmem_cache *dwarf_reg_cachep;
 static mempool_t *dwarf_reg_pool;
 
-static LIST_HEAD(dwarf_cie_list);
+static struct rb_root cie_root;
 static DEFINE_SPINLOCK(dwarf_cie_lock);
 
-static LIST_HEAD(dwarf_fde_list);
+static struct rb_root fde_root;
 static DEFINE_SPINLOCK(dwarf_fde_lock);
 
 static struct dwarf_cie *cached_cie;
 
+static unsigned int dwarf_unwinder_ready;
+
 /**
  *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
  *	@frame: the DWARF frame whose list of registers we insert on
@@ -301,7 +305,8 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
  */
 static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
 {
-	struct dwarf_cie *cie;
+	struct rb_node **rb_node = &cie_root.rb_node;
+	struct dwarf_cie *cie = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dwarf_cie_lock, flags);
@@ -315,16 +320,24 @@ static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
 		goto out;
 	}
 
-	list_for_each_entry(cie, &dwarf_cie_list, link) {
-		if (cie->cie_pointer == cie_ptr) {
-			cached_cie = cie;
-			break;
+	while (*rb_node) {
+		struct dwarf_cie *cie_tmp;
+
+		cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+		BUG_ON(!cie_tmp);
+
+		if (cie_ptr == cie_tmp->cie_pointer) {
+			cie = cie_tmp;
+			cached_cie = cie_tmp;
+			goto out;
+		} else {
+			if (cie_ptr < cie_tmp->cie_pointer)
+				rb_node = &(*rb_node)->rb_left;
+			else
+				rb_node = &(*rb_node)->rb_right;
 		}
 	}
 
-	/* Couldn't find the entry in the list. */
-	if (&cie->link == &dwarf_cie_list)
-		cie = NULL;
 out:
 	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
 	return cie;
@@ -336,25 +349,34 @@ out:
  */
 struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
 {
-	struct dwarf_fde *fde;
+	struct rb_node **rb_node = &fde_root.rb_node;
+	struct dwarf_fde *fde = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
 
-	list_for_each_entry(fde, &dwarf_fde_list, link) {
-		unsigned long start, end;
+	while (*rb_node) {
+		struct dwarf_fde *fde_tmp;
+		unsigned long tmp_start, tmp_end;
 
-		start = fde->initial_location;
-		end = fde->initial_location + fde->address_range;
+		fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+		BUG_ON(!fde_tmp);
 
-		if (pc >= start && pc < end)
-			break;
-	}
+		tmp_start = fde_tmp->initial_location;
+		tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
 
-	/* Couldn't find the entry in the list. */
-	if (&fde->link == &dwarf_fde_list)
-		fde = NULL;
+		if (pc < tmp_start) {
+			rb_node = &(*rb_node)->rb_left;
+		} else {
+			if (pc < tmp_end) {
+				fde = fde_tmp;
+				goto out;
+			} else
+				rb_node = &(*rb_node)->rb_right;
+		}
+	}
 
+out:
 	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
 
 	return fde;
@@ -540,6 +562,8 @@ void dwarf_free_frame(struct dwarf_frame *frame)
 	mempool_free(frame, dwarf_frame_pool);
 }
 
+extern void ret_from_irq(void);
+
 /**
  *	dwarf_unwind_stack - unwind the stack
  *
@@ -550,8 +574,8 @@ void dwarf_free_frame(struct dwarf_frame *frame)
  *	on the callstack. Each of the lower (older) stack frames are
  *	linked via the "prev" member.
  */
-struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
-					struct dwarf_frame *prev)
+struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
+				       struct dwarf_frame *prev)
 {
 	struct dwarf_frame *frame;
 	struct dwarf_cie *cie;
@@ -560,6 +584,13 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	unsigned long addr;
 
 	/*
+	 * If we've been called in to before initialization has
+	 * completed, bail out immediately.
+	 */
+	if (!dwarf_unwinder_ready)
+		return NULL;
+
+	/*
 	 * If we're starting at the top of the stack we need get the
 	 * contents of a physical register to get the CFA in order to
 	 * begin the virtual unwinding of the stack.
@@ -678,6 +709,24 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	addr = frame->cfa + reg->addr;
 	frame->return_addr = __raw_readl(addr);
 
+	/*
+	 * Ah, the joys of unwinding through interrupts.
+	 *
+	 * Interrupts are tricky - the DWARF info needs to be _really_
+	 * accurate and unfortunately I'm seeing a lot of bogus DWARF
+	 * info. For example, I've seen interrupts occur in epilogues
+	 * just after the frame pointer (r14) had been restored. The
+	 * problem was that the DWARF info claimed that the CFA could be
+	 * reached by using the value of the frame pointer before it was
+	 * restored.
+	 *
+	 * So until the compiler can be trusted to produce reliable
+	 * DWARF info when it really matters, let's stop unwinding once
+	 * we've calculated the function that was interrupted.
+	 */
+	if (prev && prev->pc == (unsigned long)ret_from_irq)
+		frame->return_addr = 0;
+
 	return frame;
 
 bail:
@@ -688,6 +737,8 @@ bail:
 static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 			   unsigned char *end, struct module *mod)
 {
+	struct rb_node **rb_node = &cie_root.rb_node;
+	struct rb_node *parent = *rb_node;
 	struct dwarf_cie *cie;
 	unsigned long flags;
 	int count;
@@ -782,11 +833,32 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 	cie->initial_instructions = p;
 	cie->instructions_end = end;
 
-	cie->mod = mod;
-
 	/* Add to list */
 	spin_lock_irqsave(&dwarf_cie_lock, flags);
-	list_add_tail(&cie->link, &dwarf_cie_list);
+
+	while (*rb_node) {
+		struct dwarf_cie *cie_tmp;
+
+		cie_tmp = rb_entry(*rb_node, struct dwarf_cie, node);
+
+		parent = *rb_node;
+
+		if (cie->cie_pointer < cie_tmp->cie_pointer)
+			rb_node = &parent->rb_left;
+		else if (cie->cie_pointer >= cie_tmp->cie_pointer)
+			rb_node = &parent->rb_right;
+		else
+			WARN_ON(1);
+	}
+
+	rb_link_node(&cie->node, parent, rb_node);
+	rb_insert_color(&cie->node, &cie_root);
+
+#ifdef CONFIG_MODULES
+	if (mod != NULL)
+		list_add_tail(&cie->link, &mod->arch.cie_list);
+#endif
+
 	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
 
 	return 0;
@@ -796,6 +868,8 @@ static int dwarf_parse_fde(void *entry, u32 entry_type,
 			   void *start, unsigned long len,
 			   unsigned char *end, struct module *mod)
 {
+	struct rb_node **rb_node = &fde_root.rb_node;
+	struct rb_node *parent = *rb_node;
 	struct dwarf_fde *fde;
 	struct dwarf_cie *cie;
 	unsigned long flags;
@@ -843,11 +917,40 @@ static int dwarf_parse_fde(void *entry, u32 entry_type,
 	fde->instructions = p;
 	fde->end = end;
 
-	fde->mod = mod;
-
 	/* Add to list. */
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
-	list_add_tail(&fde->link, &dwarf_fde_list);
+
+	while (*rb_node) {
+		struct dwarf_fde *fde_tmp;
+		unsigned long tmp_start, tmp_end;
+		unsigned long start, end;
+
+		fde_tmp = rb_entry(*rb_node, struct dwarf_fde, node);
+
+		start = fde->initial_location;
+		end = fde->initial_location + fde->address_range;
+
+		tmp_start = fde_tmp->initial_location;
+		tmp_end = fde_tmp->initial_location + fde_tmp->address_range;
+
+		parent = *rb_node;
+
+		if (start < tmp_start)
+			rb_node = &parent->rb_left;
+		else if (start >= tmp_end)
+			rb_node = &parent->rb_right;
+		else
+			WARN_ON(1);
+	}
+
+	rb_link_node(&fde->node, parent, rb_node);
+	rb_insert_color(&fde->node, &fde_root);
+
+#ifdef CONFIG_MODULES
+	if (mod != NULL)
+		list_add_tail(&fde->link, &mod->arch.fde_list);
+#endif
+
 	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
 
 	return 0;
@@ -892,19 +995,29 @@ static struct unwinder dwarf_unwinder = {
 
 static void dwarf_unwinder_cleanup(void)
 {
-	struct dwarf_cie *cie;
-	struct dwarf_fde *fde;
+	struct rb_node **fde_rb_node = &fde_root.rb_node;
+	struct rb_node **cie_rb_node = &cie_root.rb_node;
 
 	/*
 	 * Deallocate all the memory allocated for the DWARF unwinder.
 	 * Traverse all the FDE/CIE lists and remove and free all the
 	 * memory associated with those data structures.
 	 */
-	list_for_each_entry(cie, &dwarf_cie_list, link)
-		kfree(cie);
+	while (*fde_rb_node) {
+		struct dwarf_fde *fde;
 
-	list_for_each_entry(fde, &dwarf_fde_list, link)
+		fde = rb_entry(*fde_rb_node, struct dwarf_fde, node);
+		rb_erase(*fde_rb_node, &fde_root);
 		kfree(fde);
+	}
+
+	while (*cie_rb_node) {
+		struct dwarf_cie *cie;
+
+		cie = rb_entry(*cie_rb_node, struct dwarf_cie, node);
+		rb_erase(*cie_rb_node, &cie_root);
+		kfree(cie);
+	}
 
 	kmem_cache_destroy(dwarf_reg_cachep);
 	kmem_cache_destroy(dwarf_frame_cachep);
@@ -1004,6 +1117,8 @@ int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 
 	/* Did we find the .eh_frame section? */
 	if (i != hdr->e_shnum) {
+		INIT_LIST_HEAD(&me->arch.cie_list);
+		INIT_LIST_HEAD(&me->arch.fde_list);
 		err = dwarf_parse_section((char *)start, (char *)end, me);
 		if (err) {
 			printk(KERN_WARNING "%s: failed to parse DWARF info\n",
@@ -1024,38 +1139,26 @@ int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
  */
 void module_dwarf_cleanup(struct module *mod)
 {
-	struct dwarf_fde *fde;
-	struct dwarf_cie *cie;
+	struct dwarf_fde *fde, *ftmp;
+	struct dwarf_cie *cie, *ctmp;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dwarf_cie_lock, flags);
 
-again_cie:
-	list_for_each_entry(cie, &dwarf_cie_list, link) {
-		if (cie->mod == mod)
-			break;
-	}
-
-	if (&cie->link != &dwarf_cie_list) {
+	list_for_each_entry_safe(cie, ctmp, &mod->arch.cie_list, link) {
 		list_del(&cie->link);
+		rb_erase(&cie->node, &cie_root);
 		kfree(cie);
-		goto again_cie;
 	}
 
 	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
 
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
 
-again_fde:
-	list_for_each_entry(fde, &dwarf_fde_list, link) {
-		if (fde->mod == mod)
-			break;
-	}
-
-	if (&fde->link != &dwarf_fde_list) {
+	list_for_each_entry_safe(fde, ftmp, &mod->arch.fde_list, link) {
 		list_del(&fde->link);
+		rb_erase(&fde->node, &fde_root);
 		kfree(fde);
-		goto again_fde;
 	}
 
 	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
@@ -1073,9 +1176,7 @@ again_fde:
  */
 static int __init dwarf_unwinder_init(void)
 {
-	int err;
-	INIT_LIST_HEAD(&dwarf_cie_list);
-	INIT_LIST_HEAD(&dwarf_fde_list);
+	int err = -ENOMEM;
 
 	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
 			sizeof(struct dwarf_frame), 0,
@@ -1089,11 +1190,15 @@ static int __init dwarf_unwinder_init(void)
 					  mempool_alloc_slab,
 					  mempool_free_slab,
 					  dwarf_frame_cachep);
+	if (!dwarf_frame_pool)
+		goto out;
 
 	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
 					 mempool_alloc_slab,
 					 mempool_free_slab,
 					 dwarf_reg_cachep);
+	if (!dwarf_reg_pool)
+		goto out;
 
 	err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
 	if (err)
@@ -1103,11 +1208,13 @@ static int __init dwarf_unwinder_init(void)
 	if (err)
 		goto out;
 
+	dwarf_unwinder_ready = 1;
+
 	return 0;
 
 out:
 	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
 	dwarf_unwinder_cleanup();
-	return -EINVAL;
+	return err;
 }
 early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
deleted file mode 100644
index f8bb50c..0000000
--- a/arch/sh/kernel/early_printk.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/sh/kernel/early_printk.c
- *
- *  Copyright (C) 1999, 2000  Niibe Yutaka
- *  Copyright (C) 2002  M. R. Brown
- *  Copyright (C) 2004 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/sh_bios.h>
-
-/*
- *	Print a string through the BIOS
- */
-static void sh_console_write(struct console *co, const char *s,
-				 unsigned count)
-{
-	sh_bios_console_write(s, count);
-}
-
-/*
- *	Setup initial baud/bits/parity. We do two things here:
- *	- construct a cflag setting for the first rs_open()
- *	- initialize the serial port
- *	Return non-zero if we didn't find a serial port.
- */
-static int __init sh_console_setup(struct console *co, char *options)
-{
-	int	cflag = CREAD | HUPCL | CLOCAL;
-
-	/*
-	 *	Now construct a cflag setting.
-	 *	TODO: this is a totally bogus cflag, as we have
-	 *	no idea what serial settings the BIOS is using, or
-	 *	even if its using the serial port at all.
-	 */
-	cflag |= B115200 | CS8 | /*no parity*/0;
-
-	co->cflag = cflag;
-
-	return 0;
-}
-
-static struct console bios_console = {
-	.name		= "bios",
-	.write		= sh_console_write,
-	.setup		= sh_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-
-static struct console *early_console;
-
-static int __init setup_early_printk(char *buf)
-{
-	int keep_early = 0;
-
-	if (!buf)
-		return 0;
-
-	if (strstr(buf, "keep"))
-		keep_early = 1;
-
-	if (!strncmp(buf, "bios", 4))
-		early_console = &bios_console;
-
-	if (likely(early_console)) {
-		if (keep_early)
-			early_console->flags &= ~CON_BOOT;
-		else
-			early_console->flags |= CON_BOOT;
-		register_console(early_console);
-	}
-
-	return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index f0abd58..2b15ae6 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -70,8 +70,14 @@ ret_from_exception:
 	CFI_STARTPROC simple
 	CFI_DEF_CFA r14, 0
 	CFI_REL_OFFSET 17, 64
-	CFI_REL_OFFSET 15, 0
+	CFI_REL_OFFSET 15, 60
 	CFI_REL_OFFSET 14, 56
+	CFI_REL_OFFSET 13, 52
+	CFI_REL_OFFSET 12, 48
+	CFI_REL_OFFSET 11, 44
+	CFI_REL_OFFSET 10, 40
+	CFI_REL_OFFSET 9, 36
+	CFI_REL_OFFSET 8, 32
 	preempt_stop()
 ENTRY(ret_from_irq)
 	!
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index a48cded..30e1319 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -399,12 +399,3 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-extern unsigned long *sys_call_table;
-
-unsigned long __init arch_syscall_addr(int nr)
-{
-	return (unsigned long)sys_call_table[nr];
-}
-#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 1151ecd..6e35f01 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -3,6 +3,7 @@
  *  arch/sh/kernel/head.S
  *
  *  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
+ *  Copyright (C) 2010  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
+#include <asm/mmu.h>
+#include <cpu/mmu_context.h>
 
 #ifdef CONFIG_CPU_SH4A
 #define SYNCO()		synco
@@ -33,7 +36,7 @@ ENTRY(empty_zero_page)
 	.long	1		/* LOADER_TYPE */
 	.long	0x00000000	/* INITRD_START */
 	.long	0x00000000	/* INITRD_SIZE */
-#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED)
+#ifdef CONFIG_32BIT
 	.long	0x53453f00 + 32	/* "SE?" = 32 bit */
 #else
 	.long	0x53453f00 + 29	/* "SE?" = 29 bit */
@@ -82,6 +85,211 @@ ENTRY(_stext)
 	ldc	r0, r7_bank	! ... and initial thread_info
 #endif
 
+#ifdef CONFIG_PMB
+/*
+ * Reconfigure the initial PMB mappings setup by the hardware.
+ *
+ * When we boot in 32-bit MMU mode there are 2 PMB entries already
+ * setup for us.
+ *
+ * Entry       VPN	   PPN	    V	SZ	C	UB	WT
+ * ---------------------------------------------------------------
+ *   0	    0x80000000 0x00000000   1  512MB	1	0	1
+ *   1	    0xA0000000 0x00000000   1  512MB	0	0	0
+ *
+ * But we reprogram them here because we want complete control over
+ * our address space and the initial mappings may not map PAGE_OFFSET
+ * to __MEMORY_START (or even map all of our RAM).
+ *
+ * Once we've setup cached and uncached mappings we clear the rest of the
+ * PMB entries. This clearing also deals with the fact that PMB entries
+ * can persist across reboots. The PMB could have been left in any state
+ * when the reboot occurred, so to be safe we clear all entries and start
+ * with with a clean slate.
+ *
+ * The uncached mapping is constructed using the smallest possible
+ * mapping with a single unbufferable page. Only the kernel text needs to
+ * be covered via the uncached mapping so that certain functions can be
+ * run uncached.
+ *
+ * Drivers and the like that have previously abused the 1:1 identity
+ * mapping are unsupported in 32-bit mode and must specify their caching
+ * preference when page tables are constructed.
+ *
+ * This frees up the P2 space for more nefarious purposes.
+ *
+ * Register utilization is as follows:
+ *
+ *	r0 = PMB_DATA data field
+ *	r1 = PMB_DATA address field
+ *	r2 = PMB_ADDR data field
+ *	r3 = PMB_ADDR address field
+ *	r4 = PMB_E_SHIFT
+ *	r5 = remaining amount of RAM to map
+ *	r6 = PMB mapping size we're trying to use
+ *	r7 = cached_to_uncached
+ *	r8 = scratch register
+ *	r9 = scratch register
+ *	r10 = number of PMB entries we've setup
+ *	r11 = scratch register
+ */
+
+	mov.l	.LMMUCR, r1	/* Flush the TLB */
+	mov.l	@r1, r0
+	or	#MMUCR_TI, r0
+	mov.l	r0, @r1
+
+	mov.l	.LMEMORY_SIZE, r5
+
+	mov	#PMB_E_SHIFT, r0
+	mov	#0x1, r4
+	shld	r0, r4
+
+	mov.l	.LFIRST_DATA_ENTRY, r0
+	mov.l	.LPMB_DATA, r1
+	mov.l	.LFIRST_ADDR_ENTRY, r2
+	mov.l	.LPMB_ADDR, r3
+
+	/*
+	 * First we need to walk the PMB and figure out if there are any
+	 * existing mappings that match the initial mappings VPN/PPN.
+	 * If these have already been established by the bootloader, we
+	 * don't bother setting up new entries here, and let the late PMB
+	 * initialization take care of things instead.
+	 *
+	 * Note that we may need to coalesce and merge entries in order
+	 * to reclaim more available PMB slots, which is much more than
+	 * we want to do at this early stage.
+	 */
+	mov	#0, r10
+	mov	#NR_PMB_ENTRIES, r9
+
+	mov	r1, r7		/* temporary PMB_DATA iter */
+
+.Lvalidate_existing_mappings:
+
+	mov.l	.LPMB_DATA_MASK, r11
+	mov.l	@r7, r8
+	and	r11, r8
+	cmp/eq	r0, r8		/* Check for valid __MEMORY_START mappings */
+	bt	.Lpmb_done
+
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r9, r10
+	bf/s	.Lvalidate_existing_mappings
+	 add	r4, r7		/* Increment to the next PMB_DATA entry */
+
+	/*
+	 * If we've fallen through, continue with setting up the initial
+	 * mappings.
+	 */
+
+	mov	r5, r7		/* cached_to_uncached */
+	mov	#0, r10
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Uncached mapping
+	 */
+	mov	#(PMB_SZ_16M >> 2), r9
+	shll2	r9
+
+	mov	#(PMB_UB >> 8), r8
+	shll8	r8
+
+	or	r0, r8
+	or	r9, r8
+	mov.l	r8, @r1
+	mov	r2, r8
+	add	r7, r8
+	mov.l	r8, @r3
+
+	add	r4, r1
+	add	r4, r3
+	add	#1, r10
+#endif
+
+/*
+ * Iterate over all of the available sizes from largest to
+ * smallest for constructing the cached mapping.
+ */
+#define __PMB_ITER_BY_SIZE(size)			\
+.L##size:						\
+	mov	#(size >> 4), r6;			\
+	shll16	r6;					\
+	shll8	r6;					\
+							\
+	cmp/hi	r5, r6;					\
+	bt	9999f;					\
+							\
+	mov	#(PMB_SZ_##size##M >> 2), r9;		\
+	shll2	r9;					\
+							\
+	/*						\
+	 * Cached mapping				\
+	 */						\
+	mov	#PMB_C, r8;				\
+	or	r0, r8;					\
+	or	r9, r8;					\
+	mov.l	r8, @r1;				\
+	mov.l	r2, @r3;				\
+							\
+	/* Increment to the next PMB_DATA entry */	\
+	add	r4, r1;					\
+	/* Increment to the next PMB_ADDR entry */	\
+	add	r4, r3;					\
+	/* Increment number of PMB entries */		\
+	add	#1, r10;				\
+							\
+	sub	r6, r5;					\
+	add	r6, r0;					\
+	add	r6, r2;					\
+							\
+	bra	.L##size;				\
+9999:
+
+	__PMB_ITER_BY_SIZE(512)
+	__PMB_ITER_BY_SIZE(128)
+	__PMB_ITER_BY_SIZE(64)
+	__PMB_ITER_BY_SIZE(16)
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/*
+	 * Now that we can access it, update cached_to_uncached and
+	 * uncached_size.
+	 */
+	mov.l	.Lcached_to_uncached, r0
+	mov.l	r7, @r0
+
+	mov.l	.Luncached_size, r0
+	mov	#1, r7
+	shll16	r7
+	shll8	r7
+	mov.l	r7, @r0
+#endif
+
+	/*
+	 * Clear the remaining PMB entries.
+	 *
+	 * r3 = entry to begin clearing from
+	 * r10 = number of entries we've setup so far
+	 */
+	mov	#0, r1
+	mov	#NR_PMB_ENTRIES, r0
+
+.Lagain:
+	mov.l	r1, @r3		/* Clear PMB_ADDR entry */
+	add	#1, r10		/* Increment the loop counter */
+	cmp/eq	r0, r10
+	bf/s	.Lagain
+	 add	r4, r3		/* Increment to the next PMB_ADDR entry */
+
+	mov.l	6f, r0
+	icbi	@r0
+
+.Lpmb_done:
+#endif /* CONFIG_PMB */
+
 #ifndef CONFIG_SH_NO_BSS_INIT
 	/*
 	 * Don't clear BSS if running on slow platforms such as an RTL simulation,
@@ -129,5 +337,19 @@ ENTRY(stack_start)
 3:	.long	__bss_start
 4:	.long	_end
 5:	.long	start_kernel
-6:	.long	sh_cpu_init
+6:	.long	cpu_init
 7:	.long	init_thread_union
+
+#ifdef CONFIG_PMB
+.LPMB_ADDR:		.long	PMB_ADDR
+.LPMB_DATA:		.long	PMB_DATA
+.LPMB_DATA_MASK:	.long	PMB_PFN_MASK | PMB_V
+.LFIRST_ADDR_ENTRY:	.long	PAGE_OFFSET | PMB_V
+.LFIRST_DATA_ENTRY:	.long	__MEMORY_START | PMB_V
+.LMMUCR:		.long	MMUCR
+.LMEMORY_SIZE:		.long	__MEMORY_SIZE
+#ifdef CONFIG_UNCACHED_MAPPING
+.Lcached_to_uncached:	.long	cached_to_uncached
+.Luncached_size:	.long	uncached_size
+#endif
+#endif
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index 3ea7658..defd851 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -220,7 +220,6 @@ clear_DTLB:
 	add.l	r22, r63, r22		/* Sign extend */
 	putcfg	r21, 0, r22		/* Set MMUDR[0].PTEH */
 
-#ifdef CONFIG_EARLY_PRINTK
 	/*
 	 * Setup a DTLB translation for SCIF phys.
 	 */
@@ -231,7 +230,6 @@ clear_DTLB:
 	movi    0xfa03, r22	/* 0xfa030000, fixed SCIF virt */
 	shori   0x0003, r22
 	putcfg  r21, 0, r22	/* PTEH last */
-#endif
 
 	/*
 	 * Set cache behaviours.
diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
new file mode 100644
index 0000000..efae6ab
--- /dev/null
+++ b/arch/sh/kernel/hw_breakpoint.c
@@ -0,0 +1,420 @@
+/*
+ * arch/sh/kernel/hw_breakpoint.c
+ *
+ * Unified kernel/user-space hardware breakpoint facility for the on-chip UBC.
+ *
+ * Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/percpu.h>
+#include <linux/kallsyms.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/mmu_context.h>
+#include <asm/ptrace.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
+
+/*
+ * A dummy placeholder for early accesses until the CPUs get a chance to
+ * register their UBCs later in the boot process.
+ */
+static struct sh_ubc ubc_dummy = { .num_events = 0 };
+
+static struct sh_ubc *sh_ubc __read_mostly = &ubc_dummy;
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free UBC channel and use it for this breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int i;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+		return -EBUSY;
+
+	clk_enable(sh_ubc->clk);
+	sh_ubc->enable(info, i);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int i;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == sh_ubc->num_events, "Can't find any breakpoint slot"))
+		return;
+
+	sh_ubc->disable(info, i);
+	clk_disable(sh_ubc->clk);
+}
+
+static int get_hbp_len(u16 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case SH_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+	return len_in_bytes;
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = get_hbp_len(info->len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+int arch_bp_generic_fields(int sh_len, int sh_type,
+			   int *gen_len, int *gen_type)
+{
+	/* Len */
+	switch (sh_len) {
+	case SH_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (sh_type) {
+	case SH_BREAKPOINT_READ:
+		*gen_type = HW_BREAKPOINT_R;
+	case SH_BREAKPOINT_WRITE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case SH_BREAKPOINT_RW:
+		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	info->address = bp->attr.bp_addr;
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->len = SH_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->len = SH_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->len = SH_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		info->len = SH_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_R:
+		info->type = SH_BREAKPOINT_READ;
+		break;
+	case HW_BREAKPOINT_W:
+		info->type = SH_BREAKPOINT_WRITE;
+		break;
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		info->type = SH_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned int align;
+	int ret;
+
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		return ret;
+
+	ret = -EINVAL;
+
+	switch (info->len) {
+	case SH_BREAKPOINT_LEN_1:
+		align = 0;
+		break;
+	case SH_BREAKPOINT_LEN_2:
+		align = 1;
+		break;
+	case SH_BREAKPOINT_LEN_4:
+		align = 3;
+		break;
+	case SH_BREAKPOINT_LEN_8:
+		align = 7;
+		break;
+	default:
+		return ret;
+	}
+
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)kallsyms_lookup_name(info->name);
+
+	/*
+	 * Check that the low-order bits of the address are appropriate
+	 * for the alignment implied by len.
+	 */
+	if (info->address & align)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		unregister_hw_breakpoint(t->ptrace_bps[i]);
+		t->ptrace_bps[i] = NULL;
+	}
+}
+
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	int cpu, i, rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	unsigned int cmf, resume_mask;
+
+	/*
+	 * Do an early return if none of the channels triggered.
+	 */
+	cmf = sh_ubc->triggered_mask();
+	if (unlikely(!cmf))
+		return NOTIFY_DONE;
+
+	/*
+	 * By default, resume all of the active channels.
+	 */
+	resume_mask = sh_ubc->active_mask();
+
+	/*
+	 * Disable breakpoints during exception handling.
+	 */
+	sh_ubc->disable_all();
+
+	cpu = get_cpu();
+	for (i = 0; i < sh_ubc->num_events; i++) {
+		unsigned long event_mask = (1 << i);
+
+		if (likely(!(cmf & event_mask)))
+			continue;
+
+		/*
+		 * The counter may be concurrently released but that can only
+		 * occur from a call_rcu() path. We can then safely fetch
+		 * the breakpoint, use its callback, touch its counter
+		 * while we are in an rcu_read_lock() path.
+		 */
+		rcu_read_lock();
+
+		bp = per_cpu(bp_per_reg[i], cpu);
+		if (bp)
+			rc = NOTIFY_DONE;
+
+		/*
+		 * Reset the condition match flag to denote completion of
+		 * exception handling.
+		 */
+		sh_ubc->clear_triggered_mask(event_mask);
+
+		/*
+		 * bp can be NULL due to concurrent perf counter
+		 * removing.
+		 */
+		if (!bp) {
+			rcu_read_unlock();
+			break;
+		}
+
+		/*
+		 * Don't restore the channel if the breakpoint is from
+		 * ptrace, as it always operates in one-shot mode.
+		 */
+		if (bp->overflow_handler == ptrace_triggered)
+			resume_mask &= ~(1 << i);
+
+		perf_bp_event(bp, args->regs);
+
+		/* Deliver the signal to userspace */
+		if (!arch_check_bp_in_kernelspace(bp)) {
+			siginfo_t info;
+
+			info.si_signo = args->signr;
+			info.si_errno = notifier_to_errno(rc);
+			info.si_code = TRAP_HWBKPT;
+
+			force_sig_info(args->signr, &info, current);
+		}
+
+		rcu_read_unlock();
+	}
+
+	if (cmf == 0)
+		rc = NOTIFY_DONE;
+
+	sh_ubc->enable_all(resume_mask);
+
+	put_cpu();
+
+	return rc;
+}
+
+BUILD_TRAP_HANDLER(breakpoint)
+{
+	unsigned long ex = lookup_exception_vector();
+	TRAP_HANDLER_DECL;
+
+	notify_die(DIE_BREAKPOINT, "breakpoint", regs, 0, ex, SIGTRAP);
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (val != DIE_BREAKPOINT)
+		return NOTIFY_DONE;
+
+	/*
+	 * If the breakpoint hasn't been triggered by the UBC, it's
+	 * probably from a debugger, so don't do anything more here.
+	 *
+	 * This also permits the UBC interface clock to remain off for
+	 * non-UBC breakpoints, as we don't need to check the triggered
+	 * or active channel masks.
+	 */
+	if (args->trapnr != sh_ubc->trap_nr)
+		return NOTIFY_DONE;
+
+	return hw_breakpoint_handler(data);
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
+
+int register_sh_ubc(struct sh_ubc *ubc)
+{
+	/* Bail if it's already assigned */
+	if (sh_ubc != &ubc_dummy)
+		return -EBUSY;
+	sh_ubc = ubc;
+
+	pr_info("HW Breakpoints: %s UBC support registered\n", ubc->name);
+
+	WARN_ON(ubc->num_events > HBP_NUM);
+
+	return 0;
+}
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 6b3d706..425d604 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -19,11 +19,11 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
+#include <asm/smp.h>
 
-static int hlt_counter;
 void (*pm_idle)(void) = NULL;
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
+
+static int hlt_counter;
 
 static int __init nohlt_setup(char *__unused)
 {
@@ -90,10 +90,13 @@ void cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick(1);
 
-		while (!need_resched() && cpu_online(cpu)) {
+		while (!need_resched()) {
 			check_pgt_cache();
 			rmb();
 
+			if (cpu_is_offline(cpu))
+				play_dead();
+
 			local_irq_disable();
 			/* Don't trace irqs off for idle */
 			stop_critical_timings();
@@ -113,7 +116,7 @@ void cpu_idle(void)
 	}
 }
 
-void __cpuinit select_idle_routine(void)
+void __init select_idle_routine(void)
 {
 	/*
 	 * If a platform has set its own idle routine, leave it alone.
@@ -131,6 +134,15 @@ static void do_nothing(void *unused)
 {
 }
 
+void stop_this_cpu(void *unused)
+{
+	local_irq_disable();
+	set_cpu_online(smp_processor_id(), false);
+
+	for (;;)
+		cpu_sleep();
+}
+
 /*
  * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
  * pm_idle and update to new pm_idle value. Required while changing pm_idle
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4770c24..5c51b79 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -112,25 +112,3 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
         }
 }
 EXPORT_SYMBOL(memset_io);
-
-#ifndef CONFIG_GENERIC_IOMAP
-
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index e1e1dbd..447d78f 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -158,3 +158,23 @@ void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
 void generic_ioport_unmap(void __iomem *addr)
 {
 }
+
+#ifndef CONFIG_GENERIC_IOMAP
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 69be603..2947d2b 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -91,10 +91,14 @@ int register_trapped_io(struct trapped_io *tiop)
 	tiop->magic = IO_TRAPPED_MAGIC;
 	INIT_LIST_HEAD(&tiop->list);
 	spin_lock_irq(&trapped_lock);
+#ifdef CONFIG_HAS_IOPORT
 	if (flags & IORESOURCE_IO)
 		list_add(&tiop->list, &trapped_io);
+#endif
+#ifdef CONFIG_HAS_IOMEM
 	if (flags & IORESOURCE_MEM)
 		list_add(&tiop->list, &trapped_mem);
+#endif
 	spin_unlock_irq(&trapped_lock);
 
 	return 0;
@@ -184,31 +188,31 @@ static unsigned long long copy_word(unsigned long src_addr, int src_len,
 
 	switch (src_len) {
 	case 1:
-		tmp = ctrl_inb(src_addr);
+		tmp = __raw_readb(src_addr);
 		break;
 	case 2:
-		tmp = ctrl_inw(src_addr);
+		tmp = __raw_readw(src_addr);
 		break;
 	case 4:
-		tmp = ctrl_inl(src_addr);
+		tmp = __raw_readl(src_addr);
 		break;
 	case 8:
-		tmp = ctrl_inq(src_addr);
+		tmp = __raw_readq(src_addr);
 		break;
 	}
 
 	switch (dst_len) {
 	case 1:
-		ctrl_outb(tmp, dst_addr);
+		__raw_writeb(tmp, dst_addr);
 		break;
 	case 2:
-		ctrl_outw(tmp, dst_addr);
+		__raw_writew(tmp, dst_addr);
 		break;
 	case 4:
-		ctrl_outl(tmp, dst_addr);
+		__raw_writel(tmp, dst_addr);
 		break;
 	case 8:
-		ctrl_outq(tmp, dst_addr);
+		__raw_writeq(tmp, dst_addr);
 		break;
 	}
 
@@ -271,6 +275,8 @@ int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 	insn_size_t instruction;
 	int tmp;
 
+	if (trapped_io_disable)
+		return 0;
 	if (!lookup_tiop(address))
 		return 0;
 
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index d2d41d0..257de1f 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -12,6 +12,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <linux/ftrace.h>
+#include <linux/delay.h>
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
@@ -113,19 +114,14 @@ union irq_ctx {
 
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-#endif
 
-asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+
+static inline void handle_one_irq(unsigned int irq)
 {
-	struct pt_regs *old_regs = set_irq_regs(regs);
-#ifdef CONFIG_IRQSTACKS
 	union irq_ctx *curctx, *irqctx;
-#endif
-
-	irq_enter();
-	irq = irq_demux(irq);
 
-#ifdef CONFIG_IRQSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
 	irqctx = hardirq_ctx[smp_processor_id()];
 
@@ -164,20 +160,9 @@ asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
 			  "r5", "r6", "r7", "r8", "t", "pr"
 		);
 	} else
-#endif
 		generic_handle_irq(irq);
-
-	irq_exit();
-
-	set_irq_regs(old_regs);
-	return 1;
 }
 
-#ifdef CONFIG_IRQSTACKS
-static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
  */
@@ -257,8 +242,33 @@ asmlinkage void do_softirq(void)
 
 	local_irq_restore(flags);
 }
+#else
+static inline void handle_one_irq(unsigned int irq)
+{
+	generic_handle_irq(irq);
+}
 #endif
 
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	irq = irq_demux(irq_lookup(irq));
+
+	if (irq != NO_IRQ_IGNORE) {
+		handle_one_irq(irq);
+		irq_finish(irq);
+	}
+
+	irq_exit();
+
+	set_irq_regs(old_regs);
+
+	return IRQ_HANDLED;
+}
+
 void __init init_IRQ(void)
 {
 	plat_irq_setup();
@@ -283,3 +293,44 @@ int __init arch_probe_nr_irqs(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
+{
+	printk(KERN_INFO "IRQ%u: moving from cpu%u to cpu%u\n",
+	       irq, desc->node, cpu);
+
+	raw_spin_lock_irq(&desc->lock);
+	desc->chip->set_affinity(irq, cpumask_of(cpu));
+	raw_spin_unlock_irq(&desc->lock);
+}
+
+/*
+ * The CPU has been marked offline.  Migrate IRQs off this CPU.  If
+ * the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ */
+void migrate_irqs(void)
+{
+	struct irq_desc *desc;
+	unsigned int irq, cpu = smp_processor_id();
+
+	for_each_irq_desc(irq, desc) {
+		if (desc->node == cpu) {
+			unsigned int newcpu = cpumask_any_and(desc->affinity,
+							      cpu_online_mask);
+			if (newcpu >= nr_cpu_ids) {
+				if (printk_ratelimit())
+					printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
+					       irq, cpu);
+
+				cpumask_setall(desc->affinity);
+				newcpu = cpumask_any_and(desc->affinity,
+							 cpu_online_mask);
+			}
+
+			route_irq(desc, irq, newcpu);
+		}
+	}
+}
+#endif
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 3e532d0..efb6d39 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -1,7 +1,7 @@
 /*
  * SuperH KGDB support
  *
- * Copyright (C) 2008  Paul Mundt
+ * Copyright (C) 2008 - 2009  Paul Mundt
  *
  * Single stepping taken from the old stub by Henry Bell and Jeremy Siegel.
  *
@@ -237,6 +237,18 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 	return -1;
 }
 
+unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+	if (exception == 60)
+		return instruction_pointer(regs) - 2;
+	return instruction_pointer(regs);
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+}
+
 /*
  * The primary entry points for the kgdb debug trap table entries.
  */
@@ -247,28 +259,64 @@ BUILD_TRAP_HANDLER(singlestep)
 
 	local_irq_save(flags);
 	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
-	kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	local_irq_restore(flags);
 }
 
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	int ret;
+
+	switch (cmd) {
+	case DIE_BREAKPOINT:
+		/*
+		 * This means a user thread is single stepping
+		 * a system call which should be ignored
+		 */
+		if (test_thread_flag(TIF_SINGLESTEP))
+			return NOTIFY_DONE;
+
+		ret = kgdb_handle_exception(args->trapnr & 0xff, args->signr,
+					    args->err, args->regs);
+		if (ret)
+			return NOTIFY_DONE;
+
+		break;
+	}
 
-BUILD_TRAP_HANDLER(breakpoint)
+	return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
 {
 	unsigned long flags;
-	TRAP_HANDLER_DECL;
+	int ret;
 
 	local_irq_save(flags);
-	kgdb_handle_exception(vec >> 2, SIGTRAP, 0, regs);
+	ret = __kgdb_notify(ptr, cmd);
 	local_irq_restore(flags);
+
+	return ret;
 }
 
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+
+	/*
+	 * Lowest-prio notifier priority, we want to be notified last:
+	 */
+	.priority	= -INT_MAX,
+};
+
 int kgdb_arch_init(void)
 {
-	return 0;
+	return register_die_notifier(&kgdb_notifier);
 }
 
 void kgdb_arch_exit(void)
 {
+	unregister_die_notifier(&kgdb_notifier);
 }
 
 struct kgdb_arch arch_kgdb_ops = {
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
index c96850b..4049d99 100644
--- a/arch/sh/kernel/kprobes.c
+++ b/arch/sh/kernel/kprobes.c
@@ -13,6 +13,7 @@
 #include <linux/ptrace.h>
 #include <linux/preempt.h>
 #include <linux/kdebug.h>
+#include <linux/slab.h>
 #include <asm/cacheflush.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c
index 0b04e7d..8bfc6df 100644
--- a/arch/sh/kernel/localtimer.c
+++ b/arch/sh/kernel/localtimer.c
@@ -44,7 +44,7 @@ static void dummy_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-void __cpuinit local_timer_setup(unsigned int cpu)
+void local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
@@ -60,3 +60,7 @@ void __cpuinit local_timer_setup(unsigned int cpu)
 
 	clockevents_register_device(clk);
 }
+
+void local_timer_stop(unsigned int cpu)
+{
+}
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 76f2802..e2a3af3 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -8,7 +8,6 @@
  * This source code is licensed under the GNU General Public License,
  * Version 2.  See the file COPYING for more details.
  */
-
 #include <linux/mm.h>
 #include <linux/kexec.h>
 #include <linux/delay.h>
@@ -16,11 +15,14 @@
 #include <linux/numa.h>
 #include <linux/ftrace.h>
 #include <linux/suspend.h>
+#include <linux/memblock.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
 #include <asm/cacheflush.h>
+#include <asm/sh_bios.h>
+#include <asm/reboot.h>
 
 typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
 				      unsigned long reboot_code_buffer,
@@ -28,15 +30,11 @@ typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
 
 extern const unsigned char relocate_new_kernel[];
 extern const unsigned int relocate_new_kernel_size;
-extern void *gdb_vbr_vector;
 extern void *vbr_base;
 
-void machine_shutdown(void)
-{
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
+void native_machine_crash_shutdown(struct pt_regs *regs)
 {
+	/* Nothing to do for UP, but definitely broken for SMP.. */
 }
 
 /*
@@ -117,11 +115,7 @@ void machine_kexec(struct kimage *image)
 	kexec_info(image);
 	flush_cache_all();
 
-#if defined(CONFIG_SH_STANDARD_BIOS)
-	asm volatile("ldc %0, vbr" :
-		     : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
-		     : "memory");
-#endif
+	sh_bios_vbr_reload();
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
@@ -153,4 +147,64 @@ void arch_crash_save_vmcoreinfo(void)
 	VMCOREINFO_SYMBOL(node_data);
 	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
 #endif
+#ifdef CONFIG_X2TLB
+	VMCOREINFO_CONFIG(X2TLB);
+#endif
+}
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
+
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
+			&crash_size, &crash_base);
+	if (ret == 0 && crash_size > 0) {
+		crashk_res.start = crash_base;
+		crashk_res.end = crash_base + crash_size - 1;
+	}
+
+	if (crashk_res.end == crashk_res.start)
+		goto disable;
+
+	crash_size = PAGE_ALIGN(crashk_res.end - crashk_res.start + 1);
+	if (!crashk_res.start) {
+		unsigned long max = memblock_end_of_DRAM() - memory_limit;
+		crashk_res.start = __memblock_alloc_base(crash_size, PAGE_SIZE, max);
+		if (!crashk_res.start) {
+			pr_err("crashkernel allocation failed\n");
+			goto disable;
+		}
+	} else {
+		ret = memblock_reserve(crashk_res.start, crash_size);
+		if (unlikely(ret < 0)) {
+			pr_err("crashkernel reservation failed - "
+			       "memory is in use\n");
+			goto disable;
+		}
+	}
+
+	crashk_res.end = crashk_res.start + crash_size - 1;
+
+	/*
+	 * Crash kernel trumps memory limit
+	 */
+	if ((memblock_end_of_DRAM() - memory_limit) <= crashk_res.end) {
+		memory_limit = 0;
+		pr_info("Disabled memory limit for crashkernel\n");
+	}
+
+	pr_info("Reserving %ldMB of memory at 0x%08lx "
+		"for crashkernel (System RAM: %ldMB)\n",
+		(unsigned long)(crash_size >> 20),
+		(unsigned long)(crashk_res.start),
+		(unsigned long)(memblock_phys_mem_size() >> 20));
+
+	return;
+
+disable:
+	crashk_res.start = crashk_res.end = 0;
 }
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 1652340..9f9bb63 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,6 +118,14 @@ void __init sh_mv_setup(void)
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
+#ifdef CONFIG_HAS_IOPORT
+
+#ifdef P2SEG
+	__set_io_port_base(P2SEG);
+#else
+	__set_io_port_base(0);
+#endif
+
 	mv_set(inb);	mv_set(inw);	mv_set(inl);
 	mv_set(outb);	mv_set(outw);	mv_set(outl);
 
@@ -129,15 +137,13 @@ void __init sh_mv_setup(void)
 
 	mv_set(ioport_map);
 	mv_set(ioport_unmap);
+
+#endif
+
 	mv_set(irq_demux);
 	mv_set(mode_pins);
+	mv_set(mem_init);
 
 	if (!sh_mv.mv_nr_irqs)
 		sh_mv.mv_nr_irqs = NR_IRQS;
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
 }
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
index 24ea837..a9dd3ab 100644
--- a/arch/sh/kernel/perf_callchain.c
+++ b/arch/sh/kernel/perf_callchain.c
@@ -68,9 +68,6 @@ perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
 
 	is_user = user_mode(regs);
 
-	if (!current || current->pid == 0)
-		return;
-
 	if (is_user && current->state != TASK_RUNNING)
 		return;
 
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 7ff0943..81b6de4 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -275,13 +275,30 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 	return &pmu;
 }
 
-void hw_perf_event_setup(int cpu)
+static void sh_pmu_setup(int cpu)
 {
 	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
 
 	memset(cpuhw, 0, sizeof(struct cpu_hw_events));
 }
 
+static int __cpuinit
+sh_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		sh_pmu_setup(cpu);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
 void hw_perf_enable(void)
 {
 	if (!sh_pmu_initialized())
@@ -298,7 +315,7 @@ void hw_perf_disable(void)
 	sh_pmu->disable_all();
 }
 
-int register_sh_pmu(struct sh_pmu *pmu)
+int __cpuinit register_sh_pmu(struct sh_pmu *pmu)
 {
 	if (sh_pmu)
 		return -EBUSY;
@@ -308,5 +325,6 @@ int register_sh_pmu(struct sh_pmu *pmu)
 
 	WARN_ON(pmu->num_events > MAX_HWEVENTS);
 
+	perf_cpu_notifier(sh_pmu_notifier);
 	return 0;
 }
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
new file mode 100644
index 0000000..dcb126d
--- /dev/null
+++ b/arch/sh/kernel/process.c
@@ -0,0 +1,101 @@
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+struct kmem_cache *task_xstate_cachep = NULL;
+unsigned int xstate_size;
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+	*dst = *src;
+
+	if (src->thread.xstate) {
+		dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!dst->thread.xstate)
+			return -ENOMEM;
+		memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
+	}
+
+	return 0;
+}
+
+void free_thread_xstate(struct task_struct *tsk)
+{
+	if (tsk->thread.xstate) {
+		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
+		tsk->thread.xstate = NULL;
+	}
+}
+
+#if THREAD_SHIFT < PAGE_SHIFT
+static struct kmem_cache *thread_info_cache;
+
+struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+	struct thread_info *ti;
+
+	ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
+	if (unlikely(ti == NULL))
+		return NULL;
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	memset(ti, 0, THREAD_SIZE);
+#endif
+	return ti;
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+	free_thread_xstate(ti->task);
+	kmem_cache_free(thread_info_cache, ti);
+}
+
+void thread_info_cache_init(void)
+{
+	thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
+					      THREAD_SIZE, SLAB_PANIC, NULL);
+}
+#else
+struct thread_info *alloc_thread_info(struct task_struct *tsk)
+{
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	gfp_t mask = GFP_KERNEL | __GFP_ZERO;
+#else
+	gfp_t mask = GFP_KERNEL;
+#endif
+	return (struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER);
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+	free_thread_xstate(ti->task);
+	free_pages((unsigned long)ti, THREAD_SIZE_ORDER);
+}
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+void arch_task_cache_init(void)
+{
+	if (!xstate_size)
+		return;
+
+	task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
+					       __alignof__(union thread_xstate),
+					       SLAB_PANIC | SLAB_NOTRACK, NULL);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+# define HAVE_SOFTFP	1
+#else
+# define HAVE_SOFTFP	0
+#endif
+
+void __cpuinit init_thread_xstate(void)
+{
+	if (boot_cpu_data.flags & CPU_HAS_FPU)
+		xstate_size = sizeof(struct sh_fpu_hard_struct);
+	else if (HAVE_SOFTFP)
+		xstate_size = sizeof(struct sh_fpu_soft_struct);
+	else
+		xstate_size = 0;
+}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index d8af889..0529819 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -15,66 +15,17 @@
  */
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/elfcore.h>
-#include <linux/pm.h>
 #include <linux/kallsyms.h>
-#include <linux/kexec.h>
-#include <linux/kdebug.h>
-#include <linux/tick.h>
-#include <linux/reboot.h>
 #include <linux/fs.h>
 #include <linux/ftrace.h>
-#include <linux/preempt.h>
+#include <linux/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
-#include <asm/pgalloc.h>
 #include <asm/system.h>
-#include <asm/ubc.h>
 #include <asm/fpu.h>
 #include <asm/syscalls.h>
-#include <asm/watchdog.h>
-
-int ubc_usercnt = 0;
-
-#ifdef CONFIG_32BIT
-static void watchdog_trigger_immediate(void)
-{
-	sh_wdt_write_cnt(0xFF);
-	sh_wdt_write_csr(0xC2);
-}
-
-void machine_restart(char * __unused)
-{
-	local_irq_disable();
-
-	/* Use watchdog timer to trigger reset */
-	watchdog_trigger_immediate();
-
-	while (1)
-		cpu_sleep();
-}
-#else
-void machine_restart(char * __unused)
-{
-	/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
-	asm volatile("ldc %0, sr\n\t"
-		     "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
-}
-#endif
-
-void machine_halt(void)
-{
-	local_irq_disable();
-
-	while (1)
-		cpu_sleep();
-}
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-}
 
 void show_regs(struct pt_regs * regs)
 {
@@ -91,7 +42,7 @@ void show_regs(struct pt_regs * regs)
 	printk("PC  : %08lx SP  : %08lx SR  : %08lx ",
 	       regs->pc, regs->regs[15], regs->sr);
 #ifdef CONFIG_MMU
-	printk("TEA : %08x\n", ctrl_inl(MMU_TEA));
+	printk("TEA : %08x\n", __raw_readl(MMU_TEA));
 #else
 	printk("\n");
 #endif
@@ -147,21 +98,34 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 }
 EXPORT_SYMBOL(kernel_thread);
 
+void start_thread(struct pt_regs *regs, unsigned long new_pc,
+		  unsigned long new_sp)
+{
+	set_fs(USER_DS);
+
+	regs->pr = 0;
+	regs->sr = SR_FD;
+	regs->pc = new_pc;
+	regs->regs[15] = new_sp;
+
+	free_thread_xstate(current);
+}
+EXPORT_SYMBOL(start_thread);
+
 /*
  * Free current thread data structures etc..
  */
 void exit_thread(void)
 {
-	if (current->thread.ubc_pc) {
-		current->thread.ubc_pc = 0;
-		ubc_usercnt -= 1;
-	}
 }
 
 void flush_thread(void)
 {
-#if defined(CONFIG_SH_FPU)
 	struct task_struct *tsk = current;
+
+	flush_ptrace_hw_breakpoint(tsk);
+
+#if defined(CONFIG_SH_FPU)
 	/* Forget lazy FPU state */
 	clear_fpu(tsk, task_pt_regs(tsk));
 	clear_used_math();
@@ -209,11 +173,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
+
 #if defined(CONFIG_SH_DSP)
 	struct task_struct *tsk = current;
-#endif
 
-#if defined(CONFIG_SH_DSP)
 	if (is_dsp_enabled(tsk)) {
 		/* We can use the __save_dsp or just copy the struct:
 		 * __save_dsp(p);
@@ -244,53 +207,11 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.sp = (unsigned long) childregs;
 	p->thread.pc = (unsigned long) ret_from_fork;
 
-	p->thread.ubc_pc = 0;
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
 
 	return 0;
 }
 
-/* Tracing by user break controller.  */
-static void ubc_set_tracing(int asid, unsigned long pc)
-{
-#if defined(CONFIG_CPU_SH4A)
-	unsigned long val;
-
-	val = (UBC_CBR_ID_INST | UBC_CBR_RW_READ | UBC_CBR_CE);
-	val |= (UBC_CBR_AIE | UBC_CBR_AIV_SET(asid));
-
-	ctrl_outl(val, UBC_CBR0);
-	ctrl_outl(pc,  UBC_CAR0);
-	ctrl_outl(0x0, UBC_CAMR0);
-	ctrl_outl(0x0, UBC_CBCR);
-
-	val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE);
-	ctrl_outl(val, UBC_CRR0);
-
-	/* Read UBC register that we wrote last, for checking update */
-	val = ctrl_inl(UBC_CRR0);
-
-#else	/* CONFIG_CPU_SH4A */
-	ctrl_outl(pc, UBC_BARA);
-
-#ifdef CONFIG_MMU
-	ctrl_outb(asid, UBC_BASRA);
-#endif
-
-	ctrl_outl(0, UBC_BAMRA);
-
-	if (current_cpu_data.type == CPU_SH7729 ||
-	    current_cpu_data.type == CPU_SH7710 ||
-	    current_cpu_data.type == CPU_SH7712 ||
-	    current_cpu_data.type == CPU_SH7203){
-		ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
-		ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
-	} else {
-		ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA);
-		ctrl_outw(BRCR_PCBA, UBC_BRCR);
-	}
-#endif	/* CONFIG_CPU_SH4A */
-}
-
 /*
  *	switch_to(x,y) should switch tasks from x to y.
  *
@@ -304,7 +225,7 @@ __switch_to(struct task_struct *prev, struct task_struct *next)
 
 	/* we're going to use this soon, after a few expensive things */
 	if (next->fpu_counter > 5)
-		prefetch(&next_t->fpu.hard);
+		prefetch(next_t->xstate);
 
 #ifdef CONFIG_MMU
 	/*
@@ -316,32 +237,13 @@ __switch_to(struct task_struct *prev, struct task_struct *next)
 		     : "r" (task_thread_info(next)));
 #endif
 
-	/* If no tasks are using the UBC, we're done */
-	if (ubc_usercnt == 0)
-		/* If no tasks are using the UBC, we're done */;
-	else if (next->thread.ubc_pc && next->mm) {
-		int asid = 0;
-#ifdef CONFIG_MMU
-		asid |= cpu_asid(smp_processor_id(), next->mm);
-#endif
-		ubc_set_tracing(asid, next->thread.ubc_pc);
-	} else {
-#if defined(CONFIG_CPU_SH4A)
-		ctrl_outl(UBC_CBR_INIT, UBC_CBR0);
-		ctrl_outl(UBC_CRR_INIT, UBC_CRR0);
-#else
-		ctrl_outw(0, UBC_BBRA);
-		ctrl_outw(0, UBC_BBRB);
-#endif
-	}
-
 	/*
 	 * If the task has used fpu the last 5 timeslices, just do a full
 	 * restore of the math state immediately to avoid the trap; the
 	 * chances of needing FPU soon are obviously high now
 	 */
 	if (next->fpu_counter > 5)
-		fpu_state_restore(task_pt_regs(next));
+		__fpu_state_restore();
 
 	return prev;
 }
@@ -434,20 +336,3 @@ unsigned long get_wchan(struct task_struct *p)
 
 	return pc;
 }
-
-asmlinkage void break_point_trap(void)
-{
-	/* Clear tracing.  */
-#if defined(CONFIG_CPU_SH4A)
-	ctrl_outl(UBC_CBR_INIT, UBC_CBR0);
-	ctrl_outl(UBC_CRR_INIT, UBC_CRR0);
-#else
-	ctrl_outw(0, UBC_BBRA);
-	ctrl_outw(0, UBC_BBRB);
-	ctrl_outl(0, UBC_BRCR);
-#endif
-	current->thread.ubc_pc = 0;
-	ubc_usercnt -= 1;
-
-	force_sig(SIGTRAP, current);
-}
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index ec79faf..d4ca648 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -21,6 +21,7 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/io.h>
@@ -32,30 +33,7 @@
 
 struct task_struct *last_task_used_math = NULL;
 
-void machine_restart(char * __unused)
-{
-	extern void phys_stext(void);
-
-	phys_stext();
-}
-
-void machine_halt(void)
-{
-	for (;;);
-}
-
-void machine_power_off(void)
-{
-	__asm__ __volatile__ (
-		"sleep\n\t"
-		"synci\n\t"
-		"nop;nop;nop;nop\n\t"
-	);
-
-	panic("Unexpected wakeup!\n");
-}
-
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	unsigned long long ah, al, bh, bl, ch, cl;
 
@@ -410,7 +388,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
 			regs->sr |= SR_FD;
 		}
 
-		memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu));
+		memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu));
 	}
 
 	return fpvalid;
@@ -527,13 +505,6 @@ out:
 	return error;
 }
 
-/*
- * These bracket the sleeping functions..
- */
-extern void interruptible_sleep_on(wait_queue_head_t *q);
-
-#define mid_sched	((unsigned long) interruptible_sleep_on)
-
 #ifdef CONFIG_FRAME_POINTER
 static int in_sh64_switch_to(unsigned long pc)
 {
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 9be35f3..6c4bbba 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -2,7 +2,7 @@
  * SuperH process tracing
  *
  * Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
- * Copyright (C) 2002 - 2008  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  *
  * Audit support by Yuichi Nakamura <ynakam@hitachisoft.jp>
  *
@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
-#include <linux/slab.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 #include <linux/io.h>
@@ -26,6 +25,7 @@
 #include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/regset.h>
+#include <linux/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -63,33 +63,64 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
-void user_enable_single_step(struct task_struct *child)
+void ptrace_triggered(struct perf_event *bp, int nmi,
+		      struct perf_sample_data *data, struct pt_regs *regs)
 {
-	/* Next scheduling will set up UBC */
-	if (child->thread.ubc_pc == 0)
-		ubc_usercnt += 1;
+	struct perf_event_attr attr;
+
+	/*
+	 * Disable the breakpoint request here since ptrace has defined a
+	 * one-shot behaviour for breakpoint exceptions.
+	 */
+	attr = bp->attr;
+	attr.disabled = true;
+	modify_user_hw_breakpoint(bp, &attr);
+}
 
-	child->thread.ubc_pc = get_stack_long(child,
-				offsetof(struct pt_regs, pc));
+static int set_single_step(struct task_struct *tsk, unsigned long addr)
+{
+	struct thread_struct *thread = &tsk->thread;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+
+	bp = thread->ptrace_bps[0];
+	if (!bp) {
+		ptrace_breakpoint_init(&attr);
+
+		attr.bp_addr = addr;
+		attr.bp_len = HW_BREAKPOINT_LEN_2;
+		attr.bp_type = HW_BREAKPOINT_R;
+
+		bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk);
+		if (IS_ERR(bp))
+			return PTR_ERR(bp);
+
+		thread->ptrace_bps[0] = bp;
+	} else {
+		int err;
+
+		attr = bp->attr;
+		attr.bp_addr = addr;
+		err = modify_user_hw_breakpoint(bp, &attr);
+		if (unlikely(err))
+			return err;
+	}
+
+	return 0;
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long pc = get_stack_long(child, offsetof(struct pt_regs, pc));
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	set_single_step(child, pc);
 }
 
 void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-
-	/*
-	 * Ensure the UBC is not programmed at the next context switch.
-	 *
-	 * Normally this is not needed but there are sequences such as
-	 * singlestep, signal delivery, and continue that leave the
-	 * ubc_pc non-zero leading to spurious SIGTRAPs.
-	 */
-	if (child->thread.ubc_pc != 0) {
-		ubc_usercnt -= 1;
-		child->thread.ubc_pc = 0;
-	}
 }
 
 /*
@@ -163,10 +194,10 @@ int fpregs_get(struct task_struct *target,
 
 	if ((boot_cpu_data.flags & CPU_HAS_FPU))
 		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					   &target->thread.fpu.hard, 0, -1);
+					   &target->thread.xstate->hardfpu, 0, -1);
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.fpu.soft, 0, -1);
+				   &target->thread.xstate->softfpu, 0, -1);
 }
 
 static int fpregs_set(struct task_struct *target,
@@ -184,10 +215,10 @@ static int fpregs_set(struct task_struct *target,
 
 	if ((boot_cpu_data.flags & CPU_HAS_FPU))
 		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.fpu.hard, 0, -1);
+					  &target->thread.xstate->hardfpu, 0, -1);
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.fpu.soft, 0, -1);
+				  &target->thread.xstate->softfpu, 0, -1);
 }
 
 static int fpregs_active(struct task_struct *target,
@@ -333,7 +364,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				else
 					tmp = 0;
 			} else
-				tmp = ((long *)&child->thread.fpu)
+				tmp = ((long *)child->thread.xstate)
 					[(addr - (long)&dummy->fpu) >> 2];
 		} else if (addr == (long) &dummy->u_fpvalid)
 			tmp = !!tsk_used_math(child);
@@ -362,7 +393,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		else if (addr >= (long) &dummy->fpu &&
 			 addr < (long) &dummy->u_fpvalid) {
 			set_stopped_child_used_math(child);
-			((long *)&child->thread.fpu)
+			((long *)child->thread.xstate)
 				[(addr - (long)&dummy->fpu) >> 2] = data;
 			ret = 0;
 		} else if (addr == (long) &dummy->u_fpvalid) {
@@ -405,29 +436,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					     0, sizeof(struct pt_dspregs),
 					     (const void __user *)data);
 #endif
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	case PTRACE_GETFDPIC: {
-		unsigned long tmp = 0;
-
-		switch (addr) {
-		case PTRACE_GETFDPIC_EXEC:
-			tmp = child->mm->context.exec_fdpic_loadmap;
-			break;
-		case PTRACE_GETFDPIC_INTERP:
-			tmp = child->mm->context.interp_fdpic_loadmap;
-			break;
-		default:
-			break;
-		}
-
-		ret = 0;
-		if (put_user(tmp, datap)) {
-			ret = -EFAULT;
-			break;
-		}
-		break;
-	}
-#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 873ebdc..5fd644d 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -88,7 +88,7 @@ get_fpu_long(struct task_struct *task, unsigned long addr)
 		regs->sr |= SR_FD;
 	}
 
-	tmp = ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)];
+	tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)];
 	return tmp;
 }
 
@@ -114,8 +114,7 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1;
 
 	if (!tsk_used_math(task)) {
-		fpinit(&task->thread.fpu.hard);
-		set_stopped_child_used_math(task);
+		init_fpu(task);
 	} else if (last_task_used_math == task) {
 		enable_fpu();
 		save_fpu(task);
@@ -124,7 +123,7 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 		regs->sr |= SR_FD;
 	}
 
-	((long *)&task->thread.fpu)[addr / sizeof(unsigned long)] = data;
+	((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data;
 	return 0;
 }
 
@@ -133,6 +132,8 @@ void user_enable_single_step(struct task_struct *child)
 	struct pt_regs *regs = child->thread.uregs;
 
 	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 void user_disable_single_step(struct task_struct *child)
@@ -140,6 +141,8 @@ void user_disable_single_step(struct task_struct *child)
 	struct pt_regs *regs = child->thread.uregs;
 
 	regs->sr &= ~SR_SSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 static int genregs_get(struct task_struct *target,
@@ -222,7 +225,7 @@ int fpregs_get(struct task_struct *target,
 		return ret;
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.fpu.hard, 0, -1);
+				   &target->thread.xstate->hardfpu, 0, -1);
 }
 
 static int fpregs_set(struct task_struct *target,
@@ -239,7 +242,7 @@ static int fpregs_set(struct task_struct *target,
 	set_stopped_child_used_math(target);
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &target->thread.fpu.hard, 0, -1);
+				  &target->thread.xstate->hardfpu, 0, -1);
 }
 
 static int fpregs_active(struct task_struct *target,
@@ -454,6 +457,8 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
 
 asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
 				   regs->regs[9]);
@@ -461,8 +466,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_exit(regs, regs->regs[9]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, 0);
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
 
 /* Called with interrupts disabled */
@@ -479,9 +485,10 @@ asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs)
 }
 
 /* Called with interrupts disabled */
-asmlinkage void do_software_break_point(unsigned long long vec,
-					struct pt_regs *regs)
+BUILD_TRAP_HANDLER(breakpoint)
 {
+	TRAP_HANDLER_DECL;
+
 	/* We need to forward step the PC, to counteract the backstep done
 	   in signal.c. */
 	local_irq_enable();
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
new file mode 100644
index 0000000..b1fca66
--- /dev/null
+++ b/arch/sh/kernel/reboot.c
@@ -0,0 +1,98 @@
+#include <linux/pm.h>
+#include <linux/kexec.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+#ifdef CONFIG_SUPERH32
+#include <asm/watchdog.h>
+#endif
+#include <asm/addrspace.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+#ifdef CONFIG_SUPERH32
+static void watchdog_trigger_immediate(void)
+{
+	sh_wdt_write_cnt(0xFF);
+	sh_wdt_write_csr(0xC2);
+}
+#endif
+
+static void native_machine_restart(char * __unused)
+{
+	local_irq_disable();
+
+	/* Address error with SR.BL=1 first. */
+	trigger_address_error();
+
+#ifdef CONFIG_SUPERH32
+	/* If that fails or is unsupported, go for the watchdog next. */
+	watchdog_trigger_immediate();
+#endif
+
+	/*
+	 * Give up and sleep.
+	 */
+	while (1)
+		cpu_sleep();
+}
+
+static void native_machine_shutdown(void)
+{
+	smp_send_stop();
+}
+
+static void native_machine_power_off(void)
+{
+	if (pm_power_off)
+		pm_power_off();
+}
+
+static void native_machine_halt(void)
+{
+	/* stop other cpus */
+	machine_shutdown();
+
+	/* stop this cpu */
+	stop_this_cpu(NULL);
+}
+
+struct machine_ops machine_ops = {
+	.power_off	= native_machine_power_off,
+	.shutdown	= native_machine_shutdown,
+	.restart	= native_machine_restart,
+	.halt		= native_machine_halt,
+#ifdef CONFIG_KEXEC
+	.crash_shutdown = native_machine_crash_shutdown,
+#endif
+};
+
+void machine_power_off(void)
+{
+	machine_ops.power_off();
+}
+
+void machine_shutdown(void)
+{
+	machine_ops.shutdown();
+}
+
+void machine_restart(char *cmd)
+{
+	machine_ops.restart(cmd);
+}
+
+void machine_halt(void)
+{
+	machine_ops.halt();
+}
+
+#ifdef CONFIG_KEXEC
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	machine_ops.crash_shutdown(regs);
+}
+#endif
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
index df3ab58..5124aeb 100644
--- a/arch/sh/kernel/return_address.c
+++ b/arch/sh/kernel/return_address.c
@@ -9,6 +9,7 @@
  * for more details.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <asm/dwarf.h>
 
 #ifdef CONFIG_DWARF_UNWINDER
@@ -23,6 +24,8 @@ void *return_address(unsigned int depth)
 		struct dwarf_frame *tmp;
 
 		tmp = dwarf_unwind_stack(ra, frame);
+		if (!tmp)
+			return NULL;
 
 		if (frame)
 			dwarf_free_frame(frame);
@@ -52,3 +55,5 @@ void *return_address(unsigned int depth)
 }
 
 #endif
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 8b0e697..e769401 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -4,7 +4,7 @@
  * This file handles the architecture-dependent parts of initialization
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2002 - 2007 Paul Mundt
+ *  Copyright (C) 2002 - 2010 Paul Mundt
  */
 #include <linux/screen_info.h>
 #include <linux/ioport.h>
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -39,7 +39,9 @@
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/clock.h>
+#include <asm/smp.h>
 #include <asm/mmu_context.h>
+#include <asm/mmzone.h>
 
 /*
  * Initialize loops_per_jiffy as 10000000 (1000MIPS).
@@ -93,6 +95,7 @@ unsigned long memory_start;
 EXPORT_SYMBOL(memory_start);
 unsigned long memory_end = 0;
 EXPORT_SYMBOL(memory_end);
+unsigned long memory_limit = 0;
 
 static struct resource mem_resources[MAX_NUMNODES];
 
@@ -100,92 +103,73 @@ int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
 
 static int __init early_parse_mem(char *p)
 {
-	unsigned long size;
+	if (!p)
+		return 1;
 
-	memory_start = (unsigned long)__va(__MEMORY_START);
-	size = memparse(p, &p);
+	memory_limit = PAGE_ALIGN(memparse(p, &p));
 
-	if (size > __MEMORY_SIZE) {
-		printk(KERN_ERR
-			"Using mem= to increase the size of kernel memory "
-			"is not allowed.\n"
-			"  Recompile the kernel with the correct value for "
-			"CONFIG_MEMORY_SIZE.\n");
-		return 0;
-	}
-
-	memory_end = memory_start + size;
+	pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
 
 	return 0;
 }
 early_param("mem", early_parse_mem);
 
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-static void __init register_bootmem_low_pages(void)
+void __init check_for_initrd(void)
 {
-	unsigned long curr_pfn, last_pfn, pages;
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long start, end;
 
 	/*
-	 * We are rounding up the start address of usable memory:
+	 * Check for the rare cases where boot loaders adhere to the boot
+	 * ABI.
 	 */
-	curr_pfn = PFN_UP(__MEMORY_START);
+	if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
+		goto disable;
+
+	start = INITRD_START + __MEMORY_START;
+	end = start + INITRD_SIZE;
+
+	if (unlikely(end <= start))
+		goto disable;
+	if (unlikely(start & ~PAGE_MASK)) {
+		pr_err("initrd must be page aligned\n");
+		goto disable;
+	}
+
+	if (unlikely(start < PAGE_OFFSET)) {
+		pr_err("initrd start < PAGE_OFFSET\n");
+		goto disable;
+	}
+
+	if (unlikely(end > memblock_end_of_DRAM())) {
+		pr_err("initrd extends beyond end of memory "
+		       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+		       end, (unsigned long)memblock_end_of_DRAM());
+		goto disable;
+	}
 
 	/*
-	 * ... and at the end of the usable range downwards:
+	 * If we got this far inspite of the boot loader's best efforts
+	 * to the contrary, assume we actually have a valid initrd and
+	 * fix up the root dev.
 	 */
-	last_pfn = PFN_DOWN(__pa(memory_end));
+	ROOT_DEV = Root_RAM0;
 
-	if (last_pfn > max_low_pfn)
-		last_pfn = max_low_pfn;
+	/*
+	 * Address sanitization
+	 */
+	initrd_start = (unsigned long)__va(__pa(start));
+	initrd_end = initrd_start + INITRD_SIZE;
 
-	pages = last_pfn - curr_pfn;
-	free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
-}
+	memblock_reserve(__pa(initrd_start), INITRD_SIZE);
 
-#ifdef CONFIG_KEXEC
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long free_mem;
-	unsigned long long crash_size, crash_base;
-	void *vp;
-	int ret;
-
-	free_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
-
-	ret = parse_crashkernel(boot_command_line, free_mem,
-			&crash_size, &crash_base);
-	if (ret == 0 && crash_size) {
-		if (crash_base <= 0) {
-			vp = alloc_bootmem_nopanic(crash_size);
-			if (!vp) {
-				printk(KERN_INFO "crashkernel allocation "
-				       "failed\n");
-				return;
-			}
-			crash_base = __pa(vp);
-		} else if (reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE) < 0) {
-			printk(KERN_INFO "crashkernel reservation failed - "
-					"memory is in use\n");
-			return;
-		}
-
-		printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-				"for crashkernel (System RAM: %ldMB)\n",
-				(unsigned long)(crash_size >> 20),
-				(unsigned long)(crash_base >> 20),
-				(unsigned long)(free_mem >> 20));
-		crashk_res.start = crash_base;
-		crashk_res.end   = crash_base + crash_size - 1;
-		insert_resource(&iomem_resource, &crashk_res);
-	}
-}
-#else
-static inline void __init reserve_crashkernel(void)
-{}
+	return;
+
+disable:
+	pr_info("initrd disabled\n");
+	initrd_start = initrd_end = 0;
 #endif
+}
 
 void __cpuinit calibrate_delay(void)
 {
@@ -207,13 +191,18 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 						unsigned long end_pfn)
 {
 	struct resource *res = &mem_resources[nid];
+	unsigned long start, end;
 
 	WARN_ON(res->name); /* max one active range per node for now */
 
+	start = start_pfn << PAGE_SHIFT;
+	end = end_pfn << PAGE_SHIFT;
+
 	res->name = "System RAM";
-	res->start = start_pfn << PAGE_SHIFT;
-	res->end = (end_pfn << PAGE_SHIFT) - 1;
+	res->start = start;
+	res->end = end - 1;
 	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
 	if (request_resource(&iomem_resource, res)) {
 		pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
 		       start_pfn, end_pfn);
@@ -229,138 +218,18 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-	add_active_range(nid, start_pfn, end_pfn);
-}
-
-void __init setup_bootmem_allocator(unsigned long free_pfn)
-{
-	unsigned long bootmap_size;
-	unsigned long bootmap_pages, bootmem_paddr;
-	u64 total_pages = (lmb_end_of_DRAM() - __MEMORY_START) >> PAGE_SHIFT;
-	int i;
-
-	bootmap_pages = bootmem_bootmap_pages(total_pages);
-
-	bootmem_paddr = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
-
-	/*
-	 * Find a proper area for the bootmem bitmap. After this
-	 * bootstrap step all allocations (until the page allocator
-	 * is intact) must be done via bootmem_alloc().
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0),
-					 bootmem_paddr >> PAGE_SHIFT,
-					 min_low_pfn, max_low_pfn);
-
-	/* Add active regions with valid PFNs. */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
-		__add_active_range(0, start_pfn, end_pfn);
-	}
-
 	/*
-	 * Add all physical memory to the bootmem map and mark each
-	 * area as present.
+	 * Also make sure that there is a PMB mapping that covers this
+	 * range before we attempt to activate it, to avoid reset by MMU.
+	 * We can hit this path with NUMA or memory hot-add.
 	 */
-	register_bootmem_low_pages();
-
-	/* Reserve the sections we're already using. */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
-				BOOTMEM_DEFAULT);
-
-	node_set_online(0);
-
-	sparse_memory_present_with_active_regions(0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	ROOT_DEV = Root_RAM0;
-
-	if (LOADER_TYPE && INITRD_START) {
-		unsigned long initrd_start_phys = INITRD_START + __MEMORY_START;
-
-		if (initrd_start_phys + INITRD_SIZE <= PFN_PHYS(max_low_pfn)) {
-			reserve_bootmem(initrd_start_phys, INITRD_SIZE,
-					BOOTMEM_DEFAULT);
-			initrd_start = (unsigned long)__va(initrd_start_phys);
-			initrd_end = initrd_start + INITRD_SIZE;
-		} else {
-			printk("initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       initrd_start_phys + INITRD_SIZE,
-			       (unsigned long)PFN_PHYS(max_low_pfn));
-			initrd_start = 0;
-		}
-	}
-#endif
+	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
+			 PAGE_KERNEL);
 
-	reserve_crashkernel();
-}
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-static void __init setup_memory(void)
-{
-	unsigned long start_pfn;
-	u64 base = min_low_pfn << PAGE_SHIFT;
-	u64 size = (max_low_pfn << PAGE_SHIFT) - base;
-
-	/*
-	 * Partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	start_pfn = PFN_UP(__pa(_end));
-
-	lmb_add(base, size);
-
-	/*
-	 * Reserve the kernel text and
-	 * Reserve the bootmem bitmap. We do this in two steps (first step
-	 * was init_bootmem()), because this catches the (definitely buggy)
-	 * case of us accidentally initializing the bootmem allocator with
-	 * an invalid RAM area.
-	 */
-	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
-		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
-		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
-
-	/*
-	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
-	 */
-	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
-
-	lmb_analyze();
-	lmb_dump_all();
-
-	setup_bootmem_allocator(start_pfn);
-}
-#else
-extern void __init setup_memory(void);
-#endif
-
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- */
-#ifdef CONFIG_CRASH_DUMP
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-	elfcorehdr_addr = memparse(arg, &arg);
-	return 0;
+	add_active_range(nid, start_pfn, end_pfn);
 }
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif
 
-void __init __attribute__ ((weak)) plat_early_device_setup(void)
+void __init __weak plat_early_device_setup(void)
 {
 }
 
@@ -401,10 +270,6 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = virt_to_phys(__bss_start);
 	bss_resource.end = virt_to_phys(_ebss)-1;
 
-	memory_start = (unsigned long)__va(__MEMORY_START);
-	if (!memory_end)
-		memory_end = memory_start + __MEMORY_SIZE;
-
 #ifdef CONFIG_CMDLINE_OVERWRITE
 	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
 #else
@@ -423,28 +288,12 @@ void __init setup_arch(char **cmdline_p)
 
 	plat_early_device_setup();
 
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-
 	sh_mv_setup();
 
-	/*
-	 * Find the highest page frame number we have available
-	 */
-	max_pfn = PFN_DOWN(__pa(memory_end));
-
-	/*
-	 * Determine low and high memory ranges:
-	 */
-	max_low_pfn = max_pfn;
-	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
-
-	nodes_clear(node_online_map);
+	/* Let earlyprintk output early console messages */
+	early_platform_driver_probe("earlyprintk", 1, 1);
 
-	/* Setup bootmem with available RAM */
-	lmb_init();
-	setup_memory();
-	sparse_init();
+	paging_init();
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
@@ -454,15 +303,7 @@ void __init setup_arch(char **cmdline_p)
 	if (likely(sh_mv.mv_setup))
 		sh_mv.mv_setup(cmdline_p);
 
-	paging_init();
-
-#ifdef CONFIG_PMB_ENABLE
-	pmb_init();
-#endif
-
-#ifdef CONFIG_SMP
 	plat_smp_setup();
-#endif
 }
 
 /* processor boot mode configuration */
diff --git a/arch/sh/kernel/sh_bios.c b/arch/sh/kernel/sh_bios.c
index c852f78..47475cc 100644
--- a/arch/sh/kernel/sh_bios.c
+++ b/arch/sh/kernel/sh_bios.c
@@ -1,19 +1,30 @@
 /*
- *  linux/arch/sh/kernel/sh_bios.c
  *  C interface for trapping into the standard LinuxSH BIOS.
  *
  *  Copyright (C) 2000 Greg Banks, Mitch Davis
+ *  Copyright (C) 1999, 2000  Niibe Yutaka
+ *  Copyright (C) 2002  M. R. Brown
+ *  Copyright (C) 2004 - 2010  Paul Mundt
  *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 #include <asm/sh_bios.h>
 
 #define BIOS_CALL_CONSOLE_WRITE		0
 #define BIOS_CALL_ETH_NODE_ADDR		10
 #define BIOS_CALL_SHUTDOWN		11
-#define BIOS_CALL_CHAR_OUT		0x1f	/* TODO: hack */
 #define BIOS_CALL_GDB_DETACH		0xff
 
+void *gdb_vbr_vector = NULL;
+
 static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
 				    long arg3)
 {
@@ -23,6 +34,9 @@ static inline long sh_bios_call(long func, long arg0, long arg1, long arg2,
 	register long r6 __asm__("r6") = arg2;
 	register long r7 __asm__("r7") = arg3;
 
+	if (!gdb_vbr_vector)
+		return -ENOSYS;
+
 	__asm__ __volatile__("trapa	#0x3f":"=z"(r0)
 			     :"0"(r0), "r"(r4), "r"(r5), "r"(r6), "r"(r7)
 			     :"memory");
@@ -34,11 +48,6 @@ void sh_bios_console_write(const char *buf, unsigned int len)
 	sh_bios_call(BIOS_CALL_CONSOLE_WRITE, (long)buf, (long)len, 0, 0);
 }
 
-void sh_bios_char_out(char ch)
-{
-	sh_bios_call(BIOS_CALL_CHAR_OUT, ch, 0, 0, 0);
-}
-
 void sh_bios_gdb_detach(void)
 {
 	sh_bios_call(BIOS_CALL_GDB_DETACH, 0, 0, 0, 0);
@@ -55,3 +64,109 @@ void sh_bios_shutdown(unsigned int how)
 {
 	sh_bios_call(BIOS_CALL_SHUTDOWN, how, 0, 0, 0);
 }
+
+/*
+ * Read the old value of the VBR register to initialise the vector
+ * through which debug and BIOS traps are delegated by the Linux trap
+ * handler.
+ */
+void sh_bios_vbr_init(void)
+{
+	unsigned long vbr;
+
+	if (unlikely(gdb_vbr_vector))
+		return;
+
+	__asm__ __volatile__ ("stc vbr, %0" : "=r" (vbr));
+
+	if (vbr) {
+		gdb_vbr_vector = (void *)(vbr + 0x100);
+		printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
+		       gdb_vbr_vector);
+	} else
+		printk(KERN_NOTICE "SH-BIOS not detected\n");
+}
+
+/**
+ * sh_bios_vbr_reload - Re-load the system VBR from the BIOS vector.
+ *
+ * This can be used by save/restore code to reinitialize the system VBR
+ * from the fixed BIOS VBR. A no-op if no BIOS VBR is known.
+ */
+void sh_bios_vbr_reload(void)
+{
+	if (gdb_vbr_vector)
+		__asm__ __volatile__ (
+			"ldc %0, vbr"
+			:
+			: "r" (((unsigned long) gdb_vbr_vector) - 0x100)
+			: "memory"
+		);
+}
+
+/*
+ *	Print a string through the BIOS
+ */
+static void sh_console_write(struct console *co, const char *s,
+				 unsigned count)
+{
+	sh_bios_console_write(s, count);
+}
+
+/*
+ *	Setup initial baud/bits/parity. We do two things here:
+ *	- construct a cflag setting for the first rs_open()
+ *	- initialize the serial port
+ *	Return non-zero if we didn't find a serial port.
+ */
+static int __init sh_console_setup(struct console *co, char *options)
+{
+	int	cflag = CREAD | HUPCL | CLOCAL;
+
+	/*
+	 *	Now construct a cflag setting.
+	 *	TODO: this is a totally bogus cflag, as we have
+	 *	no idea what serial settings the BIOS is using, or
+	 *	even if its using the serial port at all.
+	 */
+	cflag |= B115200 | CS8 | /*no parity*/0;
+
+	co->cflag = cflag;
+
+	return 0;
+}
+
+static struct console bios_console = {
+	.name		= "bios",
+	.write		= sh_console_write,
+	.setup		= sh_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+};
+
+static struct console *early_console;
+
+static int __init setup_early_printk(char *buf)
+{
+	int keep_early = 0;
+
+	if (!buf)
+		return 0;
+
+	if (strstr(buf, "keep"))
+		keep_early = 1;
+
+	if (!strncmp(buf, "bios", 4))
+		early_console = &bios_console;
+
+	if (likely(early_console)) {
+		if (keep_early)
+			early_console->flags &= ~CON_BOOT;
+		else
+			early_console->flags |= CON_BOOT;
+		register_console(early_console);
+	}
+
+	return 0;
+}
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 12815ce..579cd2c 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -150,7 +150,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc)
 		return 0;
 
 	set_used_math();
-	return __copy_from_user(&tsk->thread.fpu.hard, &sc->sc_fpregs[0],
+	return __copy_from_user(&tsk->thread.xstate->hardfpu, &sc->sc_fpregs[0],
 				sizeof(long)*(16*2+2));
 }
 
@@ -175,7 +175,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc,
 	clear_used_math();
 
 	unlazy_fpu(tsk, regs);
-	return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.fpu.hard,
+	return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.xstate->hardfpu,
 			      sizeof(long)*(16*2+2));
 }
 #endif /* CONFIG_SH_FPU */
@@ -528,7 +528,7 @@ handle_syscall_restart(unsigned long save_r0, struct pt_regs *regs,
 		/* fallthrough */
 		case -ERESTARTNOINTR:
 			regs->regs[0] = save_r0;
-			regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
 			break;
 	}
 }
@@ -626,9 +626,9 @@ no_signal:
 		    regs->regs[0] == -ERESTARTSYS ||
 		    regs->regs[0] == -ERESTARTNOINTR) {
 			regs->regs[0] = save_r0;
-			regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
 		} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
-			regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+			regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
 			regs->regs[3] = __NR_restart_syscall;
 		}
 	}
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index ce76dbd..5a9f1f1 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -118,7 +118,9 @@ static int do_signal(struct pt_regs *regs, sigset_t *oldset)
 			 * clear the TS_RESTORE_SIGMASK flag.
 			 */
 			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-			tracehook_signal_handler(signr, &info, &ka, regs, 0);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 			return 1;
 		}
 	}
@@ -295,7 +297,7 @@ restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
 		regs->sr |= SR_FD;
 	}
 
-	err |= __copy_from_user(&current->thread.fpu.hard, &sc->sc_fpregs[0],
+	err |= __copy_from_user(&current->thread.xstate->hardfpu, &sc->sc_fpregs[0],
 				(sizeof(long long) * 32) + (sizeof(int) * 1));
 
 	return err;
@@ -320,7 +322,7 @@ setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
 		regs->sr |= SR_FD;
 	}
 
-	err |= __copy_to_user(&sc->sc_fpregs[0], &current->thread.fpu.hard,
+	err |= __copy_to_user(&sc->sc_fpregs[0], &current->thread.xstate->hardfpu,
 			      (sizeof(long long) * 32) + (sizeof(int) * 1));
 	clear_used_math();
 
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 983e079..509b36b 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -3,7 +3,7 @@
  *
  * SMP support for the SuperH processors.
  *
- * Copyright (C) 2002 - 2008 Paul Mundt
+ * Copyright (C) 2002 - 2010 Paul Mundt
  * Copyright (C) 2006 - 2007 Akio Idehara
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -31,7 +31,20 @@
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
 int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
 
-static inline void __init smp_store_cpu_info(unsigned int cpu)
+struct plat_smp_ops *mp_ops = NULL;
+
+/* State of each CPU */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+void __cpuinit register_smp_ops(struct plat_smp_ops *ops)
+{
+	if (mp_ops)
+		printk(KERN_WARNING "Overriding previously set SMP ops\n");
+
+	mp_ops = ops;
+}
+
+static inline void __cpuinit smp_store_cpu_info(unsigned int cpu)
 {
 	struct sh_cpuinfo *c = cpu_data + cpu;
 
@@ -46,14 +59,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = cpu;
-	plat_prepare_cpus(max_cpus);
+	mp_ops->prepare_cpus(max_cpus);
 
 #ifndef CONFIG_HOTPLUG_CPU
 	init_cpu_present(&cpu_possible_map);
 #endif
 }
 
-void __devinit smp_prepare_boot_cpu(void)
+void __init smp_prepare_boot_cpu(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -62,36 +75,137 @@ void __devinit smp_prepare_boot_cpu(void)
 
 	set_cpu_online(cpu, true);
 	set_cpu_possible(cpu, true);
+
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void native_cpu_die(unsigned int cpu)
+{
+	unsigned int i;
+
+	for (i = 0; i < 10; i++) {
+		smp_rmb();
+		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+			if (system_state == SYSTEM_RUNNING)
+				pr_info("CPU %u is now offline\n", cpu);
+
+			return;
+		}
+
+		msleep(100);
+	}
+
+	pr_err("CPU %u didn't die...\n", cpu);
+}
+
+int native_cpu_disable(unsigned int cpu)
+{
+	return cpu == 0 ? -EPERM : 0;
+}
+
+void play_dead_common(void)
+{
+	idle_task_exit();
+	irq_ctx_exit(raw_smp_processor_id());
+	mb();
+
+	__get_cpu_var(cpu_state) = CPU_DEAD;
+	local_irq_disable();
 }
 
+void native_play_dead(void)
+{
+	play_dead_common();
+}
+
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct task_struct *p;
+	int ret;
+
+	ret = mp_ops->cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
+
+	/*
+	 * Stop the local timer for this CPU.
+	 */
+	local_timer_stop(cpu);
+
+	/*
+	 * Flush user cache and TLB mappings, and then remove this CPU
+	 * from the vm mask set of all processes.
+	 */
+	flush_cache_all();
+	local_flush_tlb_all();
+
+	read_lock(&tasklist_lock);
+	for_each_process(p)
+		if (p->mm)
+			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
+	read_unlock(&tasklist_lock);
+
+	return 0;
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int native_cpu_disable(unsigned int cpu)
+{
+	return -ENOSYS;
+}
+
+void native_cpu_die(unsigned int cpu)
+{
+	/* We said "no" in __cpu_disable */
+	BUG();
+}
+
+void native_play_dead(void)
+{
+	BUG();
+}
+#endif
+
 asmlinkage void __cpuinit start_secondary(void)
 {
-	unsigned int cpu;
+	unsigned int cpu = smp_processor_id();
 	struct mm_struct *mm = &init_mm;
 
+	enable_mmu();
 	atomic_inc(&mm->mm_count);
 	atomic_inc(&mm->mm_users);
 	current->active_mm = mm;
-	BUG_ON(current->mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	per_cpu_trap_init();
 
 	preempt_disable();
 
-	notify_cpu_starting(smp_processor_id());
+	notify_cpu_starting(cpu);
 
 	local_irq_enable();
 
-	cpu = smp_processor_id();
-
 	/* Enable local timers */
 	local_timer_setup(cpu);
 	calibrate_delay();
 
 	smp_store_cpu_info(cpu);
 
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
+	per_cpu(cpu_state, cpu) = CPU_ONLINE;
 
 	cpu_idle();
 }
@@ -110,12 +224,19 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	struct task_struct *tsk;
 	unsigned long timeout;
 
-	tsk = fork_idle(cpu);
-	if (IS_ERR(tsk)) {
-		printk(KERN_ERR "Failed forking idle task for cpu %d\n", cpu);
-		return PTR_ERR(tsk);
+	tsk = cpu_data[cpu].idle;
+	if (!tsk) {
+		tsk = fork_idle(cpu);
+		if (IS_ERR(tsk)) {
+			pr_err("Failed forking idle task for cpu %d\n", cpu);
+			return PTR_ERR(tsk);
+		}
+
+		cpu_data[cpu].idle = tsk;
 	}
 
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+
 	/* Fill in data in head.S for secondary cpus */
 	stack_start.sp = tsk->thread.sp;
 	stack_start.thread_info = tsk->stack;
@@ -126,7 +247,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			   (unsigned long)&stack_start + sizeof(stack_start));
 	wmb();
 
-	plat_start_cpu(cpu, (unsigned long)_stext);
+	mp_ops->start_cpu(cpu, (unsigned long)_stext);
 
 	timeout = jiffies + HZ;
 	while (time_before(jiffies, timeout)) {
@@ -134,6 +255,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			break;
 
 		udelay(10);
+		barrier();
 	}
 
 	if (cpu_online(cpu))
@@ -158,16 +280,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void smp_send_reschedule(int cpu)
 {
-	plat_send_ipi(cpu, SMP_MSG_RESCHEDULE);
-}
-
-static void stop_this_cpu(void *unused)
-{
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_disable();
-
-	for (;;)
-		cpu_relax();
+	mp_ops->send_ipi(cpu, SMP_MSG_RESCHEDULE);
 }
 
 void smp_send_stop(void)
@@ -180,12 +293,12 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 	int cpu;
 
 	for_each_cpu(cpu, mask)
-		plat_send_ipi(cpu, SMP_MSG_FUNCTION);
+		mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	plat_send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
+	mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
 }
 
 void smp_timer_broadcast(const struct cpumask *mask)
@@ -193,7 +306,7 @@ void smp_timer_broadcast(const struct cpumask *mask)
 	int cpu;
 
 	for_each_cpu(cpu, mask)
-		plat_send_ipi(cpu, SMP_MSG_TIMER);
+		mp_ops->send_ipi(cpu, SMP_MSG_TIMER);
 }
 
 static void ipi_timer(void)
@@ -257,7 +370,6 @@ static void flush_tlb_mm_ipi(void *mm)
  * behalf of debugees, kswapd stealing pages from another process etc).
  * Kanoj 07/00.
  */
-
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	preempt_disable();
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 71399cd..81f5837 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -53,110 +53,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff);
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-		       int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMTIMEDOP)
-		switch (call) {
-		case SEMOP:
-			return sys_semtimedop(first,
-					      (struct sembuf __user *)ptr,
-					      second, NULL);
-		case SEMTIMEDOP:
-			return sys_semtimedop(first,
-				(struct sembuf __user *)ptr, second,
-			        (const struct timespec __user *)fifth);
-		case SEMGET:
-			return sys_semget (first, second, third);
-		case SEMCTL: {
-			union semun fourth;
-			if (!ptr)
-				return -EINVAL;
-			if (get_user(fourth.__pad, (void __user * __user *) ptr))
-				return -EFAULT;
-			return sys_semctl (first, second, third, fourth);
-			}
-		default:
-			return -EINVAL;
-		}
-
-	if (call <= MSGCTL)
-		switch (call) {
-		case MSGSND:
-			return sys_msgsnd (first, (struct msgbuf __user *) ptr,
-					  second, third);
-		case MSGRCV:
-			switch (version) {
-			case 0:
-			{
-				struct ipc_kludge tmp;
-
-				if (!ptr)
-					return -EINVAL;
-
-				if (copy_from_user(&tmp,
-					(struct ipc_kludge __user *) ptr,
-						   sizeof (tmp)))
-					return -EFAULT;
-
-				return sys_msgrcv (first, tmp.msgp, second,
-						   tmp.msgtyp, third);
-			}
-			default:
-				return sys_msgrcv (first,
-						   (struct msgbuf __user *) ptr,
-						   second, fifth, third);
-			}
-		case MSGGET:
-			return sys_msgget ((key_t) first, second);
-		case MSGCTL:
-			return sys_msgctl (first, second,
-					   (struct msqid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-	if (call <= SHMCTL)
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			default: {
-				ulong raddr;
-				ret = do_shmat (first, (char __user *) ptr,
-						 second, &raddr);
-				if (ret)
-					return ret;
-				return put_user (raddr, (ulong __user *) third);
-			}
-			case 1:	/* iBCS2 emulator entry point */
-				if (!segment_eq(get_fs(), get_ds()))
-					return -EINVAL;
-				return do_shmat (first, (char __user *) ptr,
-						  second, (ulong *) third);
-			}
-		case SHMDT:
-			return sys_shmdt ((char __user *)ptr);
-		case SHMGET:
-			return sys_shmget (first, second, third);
-		case SHMCTL:
-			return sys_shmctl (first, second,
-					   (struct shmid_ds __user *) ptr);
-		default:
-			return -EINVAL;
-		}
-
-	return -EINVAL;
-}
-
 /* sys_cacheflush -- flush (part of) the processor cache.  */
 asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 {
@@ -197,14 +93,3 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 	up_read(&current->mm->mmap_sem);
 	return 0;
 }
-
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 953fa16..8a0072d 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -39,12 +39,12 @@ static int null_rtc_set_time(const time_t secs)
 void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
 int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 
-#ifdef CONFIG_GENERIC_CMOS_UPDATE
 void read_persistent_clock(struct timespec *ts)
 {
 	rtc_sh_get_time(ts);
 }
 
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
 int update_persistent_clock(struct timespec now)
 {
 	return rtc_sh_set_time(now.tv_sec);
@@ -113,9 +113,5 @@ void __init time_init(void)
 	hwblk_init();
 	clk_init();
 
-	rtc_sh_get_time(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
-
 	late_time_init = sh_late_time_init;
 }
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 9b0b633..948fdb6 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -52,7 +52,11 @@ static int __init topology_init(void)
 #endif
 
 	for_each_present_cpu(i) {
-		ret = register_cpu(&per_cpu(cpu_devices, i), i);
+		struct cpu *c = &per_cpu(cpu_devices, i);
+
+		c->hotpluggable = 1;
+
+		ret = register_cpu(c, i);
 		if (unlikely(ret))
 			printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
 			       __func__, i, ret);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 7b03633..0830c2a 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -58,7 +58,7 @@ BUILD_TRAP_HANDLER(debug)
 	TRAP_HANDLER_DECL;
 
 	/* Rewind */
-	regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
 
 	if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff,
 		       SIGTRAP) == NOTIFY_STOP)
@@ -75,7 +75,7 @@ BUILD_TRAP_HANDLER(bug)
 	TRAP_HANDLER_DECL;
 
 	/* Rewind */
-	regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+	regs->pc -= instruction_size(__raw_readw(regs->pc - 4));
 
 	if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff,
 		       SIGTRAP) == NOTIFY_STOP)
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 86639be..c3d86fa 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -24,11 +24,10 @@
 #include <linux/kdebug.h>
 #include <linux/kexec.h>
 #include <linux/limits.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/sysfs.h>
+#include <linux/uaccess.h>
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <asm/alignment.h>
 #include <asm/fpu.h>
 #include <asm/kprobes.h>
 
@@ -47,73 +46,6 @@
 #define TRAP_ILLEGAL_SLOT_INST	13
 #endif
 
-static unsigned long se_user;
-static unsigned long se_sys;
-static unsigned long se_half;
-static unsigned long se_word;
-static unsigned long se_dword;
-static unsigned long se_multi;
-/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
-   valid! */
-static int se_usermode = 3;
-/* 0: no warning 1: print a warning message, disabled by default */
-static int se_kernmode_warn;
-
-#ifdef CONFIG_PROC_FS
-static const char *se_usermode_action[] = {
-	"ignored",
-	"warn",
-	"fixup",
-	"fixup+warn",
-	"signal",
-	"signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "User:\t\t%lu\n", se_user);
-	seq_printf(m, "System:\t\t%lu\n", se_sys);
-	seq_printf(m, "Half:\t\t%lu\n", se_half);
-	seq_printf(m, "Word:\t\t%lu\n", se_word);
-	seq_printf(m, "DWord:\t\t%lu\n", se_dword);
-	seq_printf(m, "Multi:\t\t%lu\n", se_multi);
-	seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
-			se_usermode_action[se_usermode]);
-	seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
-			se_kernmode_warn ? "+warn" : "");
-	return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file,
-		const char __user *buffer, size_t count, loff_t *pos)
-{
-	int *data = PDE(file->f_path.dentry->d_inode)->data;
-	char mode;
-
-	if (count > 0) {
-		if (get_user(mode, buffer))
-			return -EFAULT;
-		if (mode >= '0' && mode <= '5')
-			*data = mode - '0';
-	}
-	return count;
-}
-
-static const struct file_operations alignment_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= alignment_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= alignment_proc_write,
-};
-#endif
-
 static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 {
 	unsigned long p;
@@ -265,10 +197,10 @@ static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
 	count = 1<<(instruction&3);
 
 	switch (count) {
-	case 1: se_half  += 1; break;
-	case 2: se_word  += 1; break;
-	case 4: se_dword += 1; break;
-	case 8: se_multi += 1; break; /* ??? */
+	case 1: inc_unaligned_byte_access(); break;
+	case 2: inc_unaligned_word_access(); break;
+	case 4: inc_unaligned_dword_access(); break;
+	case 8: inc_unaligned_multi_access(); break;
 	}
 
 	ret = -EFAULT;
@@ -452,18 +384,8 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 	rm = regs->regs[index];
 
 	/* shout about fixups */
-	if (!expected) {
-		if (user_mode(regs) && (se_usermode & 1) && printk_ratelimit())
-			pr_notice("Fixing up unaligned userspace access "
-				  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-				  current->comm, task_pid_nr(current),
-				  (void *)regs->pc, instruction);
-		else if (se_kernmode_warn && printk_ratelimit())
-			pr_notice("Fixing up unaligned kernel access "
-				  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-				  current->comm, task_pid_nr(current),
-				  (void *)regs->pc, instruction);
-	}
+	if (!expected)
+		unaligned_fixups_notify(current, instruction, regs);
 
 	ret = -EFAULT;
 	switch (instruction&0xF000) {
@@ -616,10 +538,10 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 	if (user_mode(regs)) {
 		int si_code = BUS_ADRERR;
+		unsigned int user_action;
 
 		local_irq_enable();
-
-		se_user += 1;
+		inc_unaligned_user_access();
 
 		set_fs(USER_DS);
 		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
@@ -630,16 +552,12 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 		set_fs(oldfs);
 
 		/* shout about userspace fixups */
-		if (se_usermode & 1)
-			printk(KERN_NOTICE "Unaligned userspace access "
-			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-			       current->comm, current->pid, (void *)regs->pc,
-			       instruction);
+		unaligned_fixups_notify(current, instruction, regs);
 
-		if (se_usermode & 2)
+		user_action = unaligned_user_action();
+		if (user_action & UM_FIXUP)
 			goto fixup;
-
-		if (se_usermode & 4)
+		if (user_action & UM_SIGNAL)
 			goto uspace_segv;
 		else {
 			/* ignore */
@@ -659,7 +577,7 @@ fixup:
 					      &user_mem_access, 0);
 		set_fs(oldfs);
 
-		if (tmp==0)
+		if (tmp == 0)
 			return; /* sorted */
 uspace_segv:
 		printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
@@ -672,7 +590,7 @@ uspace_segv:
 		info.si_addr = (void __user *)address;
 		force_sig_info(SIGBUS, &info, current);
 	} else {
-		se_sys += 1;
+		inc_unaligned_kernel_access();
 
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
@@ -687,11 +605,7 @@ uspace_segv:
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
-		if (se_kernmode_warn)
-			printk(KERN_NOTICE "Unaligned kernel access "
-			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-			       current->comm, current->pid, (void *)regs->pc,
-			       instruction);
+		unaligned_fixups_notify(current, instruction, regs);
 
 		handle_unaligned_access(instruction, regs,
 					&user_mem_access, 0);
@@ -876,35 +790,10 @@ asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
 	die_if_kernel("exception", regs, ex);
 }
 
-#if defined(CONFIG_SH_STANDARD_BIOS)
-void *gdb_vbr_vector;
-
-static inline void __init gdb_vbr_init(void)
-{
-	register unsigned long vbr;
-
-	/*
-	 * Read the old value of the VBR register to initialise
-	 * the vector through which debug and BIOS traps are
-	 * delegated by the Linux trap handler.
-	 */
-	asm volatile("stc vbr, %0" : "=r" (vbr));
-
-	gdb_vbr_vector = (void *)(vbr + 0x100);
-	printk("Setting GDB trap vector to 0x%08lx\n",
-	       (unsigned long)gdb_vbr_vector);
-}
-#endif
-
 void __cpuinit per_cpu_trap_init(void)
 {
 	extern void *vbr_base;
 
-#ifdef CONFIG_SH_STANDARD_BIOS
-	if (raw_smp_processor_id() == 0)
-		gdb_vbr_init();
-#endif
-
 	/* NOTE: The VBR value should be at P1
 	   (or P2, virtural "fixed" address space).
 	   It's definitely should not in physical address.  */
@@ -956,11 +845,8 @@ void __init trap_init(void)
 #endif
 
 #ifdef TRAP_UBC
-	set_exception_table_vec(TRAP_UBC, break_point_trap);
+	set_exception_table_vec(TRAP_UBC, breakpoint_trap_handler);
 #endif
-
-	/* Setup VBR for boot cpu */
-	per_cpu_trap_init();
 }
 
 void show_stack(struct task_struct *tsk, unsigned long *sp)
@@ -985,34 +871,3 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_PROC_FS
-/*
- * This needs to be done after sysctl_init, otherwise sys/ will be
- * overwritten.  Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
-	struct proc_dir_entry *dir, *res;
-
-	dir = proc_mkdir("cpu", NULL);
-	if (!dir)
-		return -ENOMEM;
-
-	res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
-			       &alignment_proc_fops, &se_usermode);
-	if (!res)
-		return -ENOMEM;
-
-        res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
-			       &alignment_proc_fops, &se_kernmode_warn);
-        if (!res)
-                return -ENOMEM;
-
-	return 0;
-}
-
-fs_initcall(alignment_init);
-#endif
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index d86f531..e67e140 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -611,19 +611,19 @@ static int misaligned_fpu_load(struct pt_regs *regs,
 
 		switch (width_shift) {
 		case 2:
-			current->thread.fpu.hard.fp_regs[destreg] = buflo;
+			current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
 			break;
 		case 3:
 			if (do_paired_load) {
-				current->thread.fpu.hard.fp_regs[destreg] = buflo;
-				current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
 			} else {
 #if defined(CONFIG_CPU_LITTLE_ENDIAN)
-				current->thread.fpu.hard.fp_regs[destreg] = bufhi;
-				current->thread.fpu.hard.fp_regs[destreg+1] = buflo;
+				current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo;
 #else
-				current->thread.fpu.hard.fp_regs[destreg] = buflo;
-				current->thread.fpu.hard.fp_regs[destreg+1] = bufhi;
+				current->thread.xstate->hardfpu.fp_regs[destreg] = buflo;
+				current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi;
 #endif
 			}
 			break;
@@ -681,19 +681,19 @@ static int misaligned_fpu_store(struct pt_regs *regs,
 
 		switch (width_shift) {
 		case 2:
-			buflo = current->thread.fpu.hard.fp_regs[srcreg];
+			buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
 			break;
 		case 3:
 			if (do_paired_load) {
-				buflo = current->thread.fpu.hard.fp_regs[srcreg];
-				bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
 			} else {
 #if defined(CONFIG_CPU_LITTLE_ENDIAN)
-				bufhi = current->thread.fpu.hard.fp_regs[srcreg];
-				buflo = current->thread.fpu.hard.fp_regs[srcreg+1];
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
 #else
-				buflo = current->thread.fpu.hard.fp_regs[srcreg];
-				bufhi = current->thread.fpu.hard.fp_regs[srcreg+1];
+				buflo = current->thread.xstate->hardfpu.fp_regs[srcreg];
+				bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1];
 #endif
 			}
 			break;
@@ -944,3 +944,8 @@ asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs)
 	/* Clear all DEBUGINT causes */
 	poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0);
 }
+
+void __cpuinit per_cpu_trap_init(void)
+{
+	/* Nothing to do for now, VBR initialization later. */
+}
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index a1e4ec2..7f8a709 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -3,7 +3,7 @@
  * Written by Niibe Yutaka and Paul Mundt
  */
 #ifdef CONFIG_SUPERH64
-#define LOAD_OFFSET	CONFIG_PAGE_OFFSET
+#define LOAD_OFFSET	PAGE_OFFSET
 OUTPUT_ARCH(sh:sh5)
 #else
 #define LOAD_OFFSET	0
@@ -14,17 +14,16 @@ OUTPUT_ARCH(sh)
 #include <asm/cache.h>
 #include <asm/vmlinux.lds.h>
 
+#ifdef CONFIG_PMB
+ #define MEMORY_OFFSET	0
+#else
+ #define MEMORY_OFFSET	__MEMORY_START
+#endif
+
 ENTRY(_start)
 SECTIONS
 {
-#ifdef CONFIG_PMB_FIXED
-	. = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
-	    CONFIG_ZERO_PAGE_OFFSET;
-#elif defined(CONFIG_32BIT)
-	. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-#else
-	. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
-#endif
+	. = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
 
 	_text = .;		/* Text and read-only data */
 
@@ -35,12 +34,7 @@ SECTIONS
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		HEAD_TEXT
 		TEXT_TEXT
-
-#ifdef CONFIG_SUPERH64
-		*(.text64)
-		*(.text..SHmedia32)
-#endif
-
+		EXTRA_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
@@ -51,24 +45,12 @@ SECTIONS
 	} = 0x0009
 
 	EXCEPTION_TABLE(16)
-
 	NOTES
-	RO_DATA(PAGE_SIZE)
-
-	/*
-	 * Code which must be executed uncached and the associated data
-	 */
-	. = ALIGN(PAGE_SIZE);
-	.uncached : AT(ADDR(.uncached) - LOAD_OFFSET) {
-		__uncached_start = .;
-		*(.uncached.text)
-		*(.uncached.data)
-		__uncached_end = .;
-	}
 
+	_sdata = .;
+	RO_DATA(PAGE_SIZE)
 	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-
-	_edata = .;			/* End of data section */
+	_edata = .;
 
 	DWARF_EH_FRAME
 
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
index 3f7e415..242117c 100644
--- a/arch/sh/kernel/vsyscall/vsyscall.c
+++ b/arch/sh/kernel/vsyscall/vsyscall.c
@@ -11,7 +11,6 @@
  * for more details.
  */
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gfp.h>
diff --git a/arch/sh/lib/libgcc.h b/arch/sh/lib/libgcc.h
index 3f19d1c..05909d58 100644
--- a/arch/sh/lib/libgcc.h
+++ b/arch/sh/lib/libgcc.h
@@ -17,8 +17,7 @@ struct DWstruct {
 #error I feel sick.
 #endif
 
-typedef union
-{
+typedef union {
 	struct DWstruct s;
 	long long ll;
 } DWunion;
diff --git a/arch/sh/lib/strlen.S b/arch/sh/lib/strlen.S
index f8ab296..1bcc13f 100644
--- a/arch/sh/lib/strlen.S
+++ b/arch/sh/lib/strlen.S
@@ -35,7 +35,7 @@ ENTRY(strlen)
 	mov.b	@r4+,r1
 	tst	r1,r1
 	bt	8f
-	add	#1,r2	
+	add	#1,r2
 
 1:
 	mov	#0,r3
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index d6c15ca..1fcdb12 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -471,10 +471,10 @@ static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_reg
  *	denormal_to_double - Given denormalized float number,
  *	                     store double float
  *
- *	@fpu: Pointer to sh_fpu_hard structure
+ *	@fpu: Pointer to sh_fpu_soft structure
  *	@n: Index to FP register
  */
-static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
+static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
 {
 	unsigned long du, dl;
 	unsigned long x = fpu->fpul;
@@ -552,11 +552,11 @@ static int ieee_fpe_handler(struct pt_regs *regs)
 	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
 		struct task_struct *tsk = current;
 
-		if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) {
+		if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
 			/* FPU error */
-			denormal_to_double (&tsk->thread.fpu.hard,
+			denormal_to_double (&tsk->thread.xstate->softfpu,
 					    (finsn >> 8) & 0xf);
-			tsk->thread.fpu.hard.fpscr &=
+			tsk->thread.xstate->softfpu.fpscr &=
 				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
 			task_thread_info(tsk)->status |= TS_USEDFPU;
 		} else {
@@ -617,7 +617,7 @@ static void fpu_init(struct sh_fpu_soft_struct *fpu)
 int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
-	struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
+	struct sh_fpu_soft_struct *fpu = &(tsk->thread.xstate->softfpu);
 
 	if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
 		/* initialize once. */
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 986a71b..1445ca6 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -75,52 +75,25 @@ config MEMORY_SIZE
 config 29BIT
 	def_bool !32BIT
 	depends on SUPERH32
+	select UNCACHED_MAPPING
 
 config 32BIT
 	bool
 	default y if CPU_SH5
 
-config PMB_ENABLE
-	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
-	help
-	  If you say Y here, physical addressing will be extended to
-	  32-bits through the SH-4A PMB. If this is not set, legacy
-	  29-bit physical addressing will be used.
-
-choice
-	prompt "PMB handling type"
-	depends on PMB_ENABLE
-	default PMB_FIXED
-
 config PMB
-	bool "PMB"
+	bool "Support 32-bit physical addressing through PMB"
 	depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
+	select 32BIT
+	select UNCACHED_MAPPING
 	help
 	  If you say Y here, physical addressing will be extended to
 	  32-bits through the SH-4A PMB. If this is not set, legacy
 	  29-bit physical addressing will be used.
 
-config PMB_FIXED
-	bool "fixed PMB"
-	depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
-	select 32BIT
-	help
-	  If this option is enabled, fixed PMB mappings are inherited
-	  from the boot loader, and the kernel does not attempt dynamic
-	  management. This is the closest to legacy 29-bit physical mode,
-	  and allows systems to support up to 512MiB of system memory.
-
-endchoice
-
 config X2TLB
-	bool "Enable extended TLB mode"
-	depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL
-	help
-	  Selecting this option will enable the extended mode of the SH-X2
-	  TLB. For legacy SH-X behaviour and interoperability, say N. For
-	  all of the fun new features and a willingless to submit bug reports,
-	  say Y.
+	def_bool y
+	depends on (CPU_SHX2 || CPU_SHX3) && MMU
 
 config VSYSCALL
 	bool "Support vsyscall page"
@@ -188,14 +161,19 @@ config ARCH_MEMORY_PROBE
 	def_bool y
 	depends on MEMORY_HOTPLUG
 
+config IOREMAP_FIXED
+       def_bool y
+       depends on X2TLB || SUPERH64
+
+config UNCACHED_MAPPING
+	bool
+
 choice
 	prompt "Kernel page size"
-	default PAGE_SIZE_8KB if X2TLB
 	default PAGE_SIZE_4KB
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !MMU || !X2TLB
 	help
 	  This is the default page size used by all SuperH CPUs.
 
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 8a70535..53f7c68 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Linux SuperH-specific parts of the memory manager.
 #
 
-obj-y			:= cache.o init.o consistent.o mmap.o
+obj-y			:= alignment.o cache.o init.o consistent.o mmap.o
 
 cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
 cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
@@ -10,31 +10,36 @@ cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
 cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
 cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
 cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cacheops-$(CONFIG_CPU_SHX3)		+= cache-shx3.o
 
 obj-y			+= $(cacheops-y)
 
 mmu-y			:= nommu.o extable_32.o
 mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault_$(BITS).o \
-			   ioremap_$(BITS).o kmap.o tlbflush_$(BITS).o
+			   ioremap.o kmap.o pgtable.o tlbflush_$(BITS).o
 
 obj-y			+= $(mmu-y)
-obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
 
-ifdef CONFIG_DEBUG_FS
-obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
+debugfs-y			:= asids-debugfs.o
+ifndef CONFIG_CACHE_OFF
+debugfs-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
 endif
 
 ifdef CONFIG_MMU
+debugfs-$(CONFIG_CPU_SH4)	+= tlb-debugfs.o
 tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o tlb-urb.o
 tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o tlb-urb.o
 obj-y				+= $(tlb-y)
 endif
 
+obj-$(CONFIG_DEBUG_FS)		+= $(debugfs-y)
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_PMB_ENABLE)	+= pmb.o
+obj-$(CONFIG_PMB)		+= pmb.o
 obj-$(CONFIG_NUMA)		+= numa.o
+obj-$(CONFIG_IOREMAP_FIXED)	+= ioremap_fixed.o
+obj-$(CONFIG_UNCACHED_MAPPING)	+= uncached.o
 
 # Special flags for fault_64.o.  This puts restrictions on the number of
 # caller-save registers that the compiler can target when building this file.
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
new file mode 100644
index 0000000..b2595b8
--- /dev/null
+++ b/arch/sh/mm/alignment.c
@@ -0,0 +1,189 @@
+/*
+ * Alignment access counters and corresponding user-space interfaces.
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2009 - 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include <asm/alignment.h>
+#include <asm/processor.h>
+
+static unsigned long se_user;
+static unsigned long se_sys;
+static unsigned long se_half;
+static unsigned long se_word;
+static unsigned long se_dword;
+static unsigned long se_multi;
+/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
+   valid! */
+static int se_usermode = UM_WARN | UM_FIXUP;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
+
+core_param(alignment, se_usermode, int, 0600);
+
+void inc_unaligned_byte_access(void)
+{
+	se_half++;
+}
+
+void inc_unaligned_word_access(void)
+{
+	se_word++;
+}
+
+void inc_unaligned_dword_access(void)
+{
+	se_dword++;
+}
+
+void inc_unaligned_multi_access(void)
+{
+	se_multi++;
+}
+
+void inc_unaligned_user_access(void)
+{
+	se_user++;
+}
+
+void inc_unaligned_kernel_access(void)
+{
+	se_sys++;
+}
+
+/*
+ * This defaults to the global policy which can be set from the command
+ * line, while processes can overload their preferences via prctl().
+ */
+unsigned int unaligned_user_action(void)
+{
+	unsigned int action = se_usermode;
+
+	if (current->thread.flags & SH_THREAD_UAC_SIGBUS) {
+		action &= ~UM_FIXUP;
+		action |= UM_SIGNAL;
+	}
+
+	if (current->thread.flags & SH_THREAD_UAC_NOPRINT)
+		action &= ~UM_WARN;
+
+	return action;
+}
+
+int get_unalign_ctl(struct task_struct *tsk, unsigned long addr)
+{
+	return put_user(tsk->thread.flags & SH_THREAD_UAC_MASK,
+			(unsigned int __user *)addr);
+}
+
+int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
+{
+	tsk->thread.flags = (tsk->thread.flags & ~SH_THREAD_UAC_MASK) |
+			    (val & SH_THREAD_UAC_MASK);
+	return 0;
+}
+
+void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
+			     struct pt_regs *regs)
+{
+	if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit())
+		pr_notice("Fixing up unaligned userspace access "
+			  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			  tsk->comm, task_pid_nr(tsk),
+			  (void *)instruction_pointer(regs), insn);
+	else if (se_kernmode_warn && printk_ratelimit())
+		pr_notice("Fixing up unaligned kernel access "
+			  "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			  tsk->comm, task_pid_nr(tsk),
+			  (void *)instruction_pointer(regs), insn);
+}
+
+static const char *se_usermode_action[] = {
+	"ignored",
+	"warn",
+	"fixup",
+	"fixup+warn",
+	"signal",
+	"signal+warn"
+};
+
+static int alignment_proc_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "User:\t\t%lu\n", se_user);
+	seq_printf(m, "System:\t\t%lu\n", se_sys);
+	seq_printf(m, "Half:\t\t%lu\n", se_half);
+	seq_printf(m, "Word:\t\t%lu\n", se_word);
+	seq_printf(m, "DWord:\t\t%lu\n", se_dword);
+	seq_printf(m, "Multi:\t\t%lu\n", se_multi);
+	seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
+			se_usermode_action[se_usermode]);
+	seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+			se_kernmode_warn ? "+warn" : "");
+	return 0;
+}
+
+static int alignment_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, alignment_proc_show, NULL);
+}
+
+static ssize_t alignment_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
+{
+	int *data = PDE(file->f_path.dentry->d_inode)->data;
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '5')
+			*data = mode - '0';
+	}
+	return count;
+}
+
+static const struct file_operations alignment_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= alignment_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= alignment_proc_write,
+};
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten.  Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+	struct proc_dir_entry *dir, *res;
+
+	dir = proc_mkdir("cpu", NULL);
+	if (!dir)
+		return -ENOMEM;
+
+	res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_usermode);
+	if (!res)
+		return -ENOMEM;
+
+        res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
+			       &alignment_proc_fops, &se_kernmode_warn);
+        if (!res)
+                return -ENOMEM;
+
+	return 0;
+}
+fs_initcall(alignment_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index 5ba067b..690ed01 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -22,8 +22,7 @@ enum cache_type {
 	CACHE_TYPE_UNIFIED,
 };
 
-static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file,
-						  void *iter)
+static int cache_seq_show(struct seq_file *file, void *iter)
 {
 	unsigned int cache_type = (unsigned int)file->private;
 	struct cache_info *cache;
@@ -37,7 +36,7 @@ static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file,
 	 */
 	jump_to_uncached();
 
-	ccr = ctrl_inl(CCR);
+	ccr = __raw_readl(CCR);
 	if ((ccr & CCR_CACHE_ENABLE) == 0) {
 		back_to_cached();
 
@@ -90,7 +89,7 @@ static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file,
 		for (addr = addrstart, line = 0;
 		     addr < addrstart + waysize;
 		     addr += cache->linesz, line++) {
-			unsigned long data = ctrl_inl(addr);
+			unsigned long data = __raw_readl(addr);
 
 			/* Check the V bit, ignore invalid cachelines */
 			if ((data & 1) == 0)
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 699a71f..defcf71 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -28,10 +28,10 @@ static void sh2__flush_wback_region(void *start, int size)
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
 		int way;
 		for (way = 0; way < 4; way++) {
-			unsigned long data =  ctrl_inl(addr | (way << 12));
+			unsigned long data =  __raw_readl(addr | (way << 12));
 			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
 				data &= ~SH_CACHE_UPDATED;
-				ctrl_outl(data, addr | (way << 12));
+				__raw_writel(data, addr | (way << 12));
 			}
 		}
 	}
@@ -47,7 +47,7 @@ static void sh2__flush_purge_region(void *start, int size)
 		& ~(L1_CACHE_BYTES-1);
 
 	for (v = begin; v < end; v+=L1_CACHE_BYTES)
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
@@ -63,9 +63,9 @@ static void sh2__flush_invalidate_region(void *start, int size)
 	local_irq_save(flags);
 	jump_to_uncached();
 
-	ccr = ctrl_inl(CCR);
+	ccr = __raw_readl(CCR);
 	ccr |= CCR_CACHE_INVALIDATE;
-	ctrl_outl(ccr, CCR);
+	__raw_writel(ccr, CCR);
 
 	back_to_cached();
 	local_irq_restore(flags);
@@ -78,7 +78,7 @@ static void sh2__flush_invalidate_region(void *start, int size)
 		& ~(L1_CACHE_BYTES-1);
 
 	for (v = begin; v < end; v+=L1_CACHE_BYTES)
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 #endif
 }
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 975899d..1f51225 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -32,10 +32,10 @@ static void sh2a__flush_wback_region(void *start, int size)
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
 		int way;
 		for (way = 0; way < 4; way++) {
-			unsigned long data =  ctrl_inl(addr | (way << 11));
+			unsigned long data =  __raw_readl(addr | (way << 11));
 			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
 				data &= ~SH_CACHE_UPDATED;
-				ctrl_outl(data, addr | (way << 11));
+				__raw_writel(data, addr | (way << 11));
 			}
 		}
 	}
@@ -58,7 +58,7 @@ static void sh2a__flush_purge_region(void *start, int size)
 	jump_to_uncached();
 
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 	back_to_cached();
@@ -78,17 +78,17 @@ static void sh2a__flush_invalidate_region(void *start, int size)
 	jump_to_uncached();
 
 #ifdef CONFIG_CACHE_WRITEBACK
-	ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+	__raw_writel(__raw_readl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
 	/* I-cache invalidate */
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 #else
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
-		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+		__raw_writel((v & CACHE_PHYSADDR_MASK),
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 #endif
@@ -115,14 +115,14 @@ static void sh2a_flush_icache_range(void *args)
 		int way;
 		/* O-Cache writeback */
 		for (way = 0; way < 4; way++) {
-			unsigned long data =  ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			unsigned long data =  __raw_readl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
 			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
 				data &= ~SH_CACHE_UPDATED;
-				ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+				__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
 			}
 		}
 		/* I-Cache invalidate */
-		ctrl_outl(addr,
+		__raw_writel(addr,
 			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
 	}
 
diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
index faef80c..e37523f 100644
--- a/arch/sh/mm/cache-sh3.c
+++ b/arch/sh/mm/cache-sh3.c
@@ -50,12 +50,12 @@ static void sh3__flush_wback_region(void *start, int size)
 			p = __pa(v);
 			addr = addrstart | (v & current_cpu_data.dcache.entry_mask);
 			local_irq_save(flags);
-			data = ctrl_inl(addr);
+			data = __raw_readl(addr);
 
 			if ((data & CACHE_PHYSADDR_MASK) ==
 			    (p & CACHE_PHYSADDR_MASK)) {
 				data &= ~SH_CACHE_UPDATED;
-				ctrl_outl(data, addr);
+				__raw_writel(data, addr);
 				local_irq_restore(flags);
 				break;
 			}
@@ -86,7 +86,7 @@ static void sh3__flush_purge_region(void *start, int size)
 		data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */
 		addr = CACHE_OC_ADDRESS_ARRAY |
 			(v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC;
-		ctrl_outl(data, addr);
+		__raw_writel(data, addr);
 	}
 }
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 560ddb6..2cfae81 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -36,7 +36,7 @@ static void __flush_cache_one(unsigned long addr, unsigned long phys,
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
+static void sh4_flush_icache_range(void *args)
 {
 	struct flusher_data *data = args;
 	unsigned long start, end;
@@ -109,6 +109,7 @@ static inline void flush_cache_one(unsigned long start, unsigned long phys)
 static void sh4_flush_dcache_page(void *arg)
 {
 	struct page *page = arg;
+	unsigned long addr = (unsigned long)page_address(page);
 #ifndef CONFIG_SMP
 	struct address_space *mapping = page_mapping(page);
 
@@ -116,22 +117,14 @@ static void sh4_flush_dcache_page(void *arg)
 		set_bit(PG_dcache_dirty, &page->flags);
 	else
 #endif
-	{
-		unsigned long phys = page_to_phys(page);
-		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
-		int i, n;
-
-		/* Loop all the D-cache */
-		n = boot_cpu_data.dcache.n_aliases;
-		for (i = 0; i < n; i++, addr += PAGE_SIZE)
-			flush_cache_one(addr, phys);
-	}
+		flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+				(addr & shm_align_mask), page_to_phys(page));
 
 	wmb();
 }
 
 /* TODO: Selective icache invalidation through IC address array.. */
-static void __uses_jump_to_uncached flush_icache_all(void)
+static void flush_icache_all(void)
 {
 	unsigned long flags, ccr;
 
@@ -139,9 +132,9 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	jump_to_uncached();
 
 	/* Flush I-cache */
-	ccr = ctrl_inl(CCR);
+	ccr = __raw_readl(CCR);
 	ccr |= CCR_CACHE_ICI;
-	ctrl_outl(ccr, CCR);
+	__raw_writel(ccr, CCR);
 
 	/*
 	 * back_to_cached() will take care of the barrier for us, don't add
@@ -384,9 +377,9 @@ extern void __weak sh4__flush_region_init(void);
 void __init sh4_cache_init(void)
 {
 	printk("PVR=%08x CVR=%08x PRR=%08x\n",
-		ctrl_inl(CCN_PVR),
-		ctrl_inl(CCN_CVR),
-		ctrl_inl(CCN_PRR));
+		__raw_readl(CCN_PVR),
+		__raw_readl(CCN_CVR),
+		__raw_readl(CCN_PRR));
 
 	local_flush_icache_range	= sh4_flush_icache_range;
 	local_flush_dcache_page		= sh4_flush_dcache_page;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f527fb7..f498da1 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -48,10 +48,10 @@ static inline void cache_wback_all(void)
 			unsigned long data;
 			int v = SH_CACHE_UPDATED | SH_CACHE_VALID;
 
-			data = ctrl_inl(addr);
+			data = __raw_readl(addr);
 
 			if ((data & v) == v)
-				ctrl_outl(data & ~v, addr);
+				__raw_writel(data & ~v, addr);
 
 		}
 
@@ -78,7 +78,7 @@ static void sh7705_flush_icache_range(void *args)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
+static void __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -115,10 +115,10 @@ static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
 		     addr += current_cpu_data.dcache.linesz) {
 			unsigned long data;
 
-			data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
+			data = __raw_readl(addr) & (0x1ffffC00 | SH_CACHE_VALID);
 		        if (data == phys) {
 				data &= ~(SH_CACHE_VALID | SH_CACHE_UPDATED);
-				ctrl_outl(data, addr);
+				__raw_writel(data, addr);
 			}
 		}
 
@@ -144,7 +144,7 @@ static void sh7705_flush_dcache_page(void *arg)
 		__flush_dcache_page(__pa(page_address(page)));
 }
 
-static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
+static void sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 
diff --git a/arch/sh/mm/cache-shx3.c b/arch/sh/mm/cache-shx3.c
new file mode 100644
index 0000000..c0adbee
--- /dev/null
+++ b/arch/sh/mm/cache-shx3.c
@@ -0,0 +1,44 @@
+/*
+ * arch/sh/mm/cache-shx3.c - SH-X3 optimized cache ops
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/cache.h>
+
+#define CCR_CACHE_SNM	0x40000		/* Hardware-assisted synonym avoidance */
+#define CCR_CACHE_IBE	0x1000000	/* ICBI broadcast */
+
+void __init shx3_cache_init(void)
+{
+	unsigned int ccr;
+
+	ccr = __raw_readl(CCR);
+
+	/*
+	 * If we've got cache aliases, resolve them in hardware.
+	 */
+	if (boot_cpu_data.dcache.n_aliases || boot_cpu_data.icache.n_aliases) {
+		ccr |= CCR_CACHE_SNM;
+
+		boot_cpu_data.icache.n_aliases = 0;
+		boot_cpu_data.dcache.n_aliases = 0;
+
+		pr_info("Enabling hardware synonym avoidance\n");
+	}
+
+#ifdef CONFIG_SMP
+	/*
+	 * Broadcast I-cache block invalidations by default.
+	 */
+	ccr |= CCR_CACHE_IBE;
+#endif
+
+	writel_uncached(ccr, CCR);
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index b8607fa..ba401d1 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -2,7 +2,7 @@
  * arch/sh/mm/cache.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002 - 2009  Paul Mundt
+ * Copyright (C) 2002 - 2010  Paul Mundt
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -41,8 +41,17 @@ static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
                                    int wait)
 {
 	preempt_disable();
-	smp_call_function(func, info, wait);
+
+	/*
+	 * It's possible that this gets called early on when IRQs are
+	 * still disabled due to ioremapping by the boot CPU, so don't
+	 * even attempt IPIs unless there are other CPUs online.
+	 */
+	if (num_online_cpus() > 1)
+		smp_call_function(func, info, wait);
+
 	func(info);
+
 	preempt_enable();
 }
 
@@ -325,6 +334,13 @@ void __init cpu_cache_init(void)
 		extern void __weak sh4_cache_init(void);
 
 		sh4_cache_init();
+
+		if ((boot_cpu_data.type == CPU_SH7786) ||
+		    (boot_cpu_data.type == CPU_SHX3)) {
+			extern void __weak shx3_cache_init(void);
+
+			shx3_cache_init();
+		}
 	}
 
 	if (boot_cpu_data.family == CPU_FAMILY_SH5) {
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 902967e..c86a085 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -16,6 +16,7 @@
 #include <linux/dma-debug.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/gfp.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
 
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 4753010..d4c34d7 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -53,6 +53,9 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	if (!pud_present(*pud_k))
 		return NULL;
 
+	if (!pud_present(*pud))
+	    set_pud(pud, *pud_k);
+
 	pmd = pmd_offset(pud, address);
 	pmd_k = pmd_offset(pud_k, address);
 	if (!pmd_present(*pmd_k))
@@ -197,7 +200,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -287,15 +289,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
@@ -371,7 +368,7 @@ handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess,
 		local_flush_tlb_one(get_asid(), address & PAGE_MASK);
 #endif
 
-	update_mmu_cache(NULL, address, entry);
+	update_mmu_cache(NULL, address, pte);
 
 	return 0;
 }
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 9304117..9163db3 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -13,7 +13,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 
 #include <asm/mman.h>
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 432acd0..d0e2491 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -2,7 +2,7 @@
  * linux/arch/sh/mm/init.c
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2002 - 2007  Paul Mundt
+ *  Copyright (C) 2002 - 2010  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/init.c:
  *   Copyright (C) 1995  Linus Torvalds
@@ -10,36 +10,39 @@
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/bootmem.h>
 #include <linux/proc_fs.h>
 #include <linux/pagemap.h>
 #include <linux/percpu.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 #include <linux/dma-mapping.h>
 #include <asm/mmu_context.h>
+#include <asm/mmzone.h>
+#include <asm/kexec.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/cache.h>
+#include <asm/sizes.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-#ifdef CONFIG_SUPERH32
-/*
- * Handle trivial transitions between cached and uncached
- * segments, making use of the 1:1 mapping relationship in
- * 512MB lowmem.
- *
- * This is the offset of the uncached section from its cached alias.
- * Default value only valid in 29 bit mode, in 32bit mode will be
- * overridden in pmb_init.
- */
-unsigned long cached_to_uncached = P2SEG - P1SEG;
-#endif
+void __init generic_mem_init(void)
+{
+	memblock_add(__MEMORY_START, __MEMORY_SIZE);
+}
+
+void __init __weak plat_mem_setup(void)
+{
+	/* Nothing to see here, move along. */
+}
 
 #ifdef CONFIG_MMU
-static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
+static pte_t *__get_pte_phys(unsigned long addr)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -49,22 +52,30 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 	pgd = pgd_offset_k(addr);
 	if (pgd_none(*pgd)) {
 		pgd_ERROR(*pgd);
-		return;
+		return NULL;
 	}
 
 	pud = pud_alloc(NULL, pgd, addr);
 	if (unlikely(!pud)) {
 		pud_ERROR(*pud);
-		return;
+		return NULL;
 	}
 
 	pmd = pmd_alloc(NULL, pud, addr);
 	if (unlikely(!pmd)) {
 		pmd_ERROR(*pmd);
-		return;
+		return NULL;
 	}
 
 	pte = pte_offset_kernel(pmd, addr);
+	return pte;
+}
+
+static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
+{
+	pte_t *pte;
+
+	pte = __get_pte_phys(addr);
 	if (!pte_none(*pte)) {
 		pte_ERROR(*pte);
 		return;
@@ -72,23 +83,24 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 
 	set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot));
 	local_flush_tlb_one(get_asid(), addr);
+
+	if (pgprot_val(prot) & _PAGE_WIRED)
+		tlb_wire_entry(NULL, addr, *pte);
+}
+
+static void clear_pte_phys(unsigned long addr, pgprot_t prot)
+{
+	pte_t *pte;
+
+	pte = __get_pte_phys(addr);
+
+	if (pgprot_val(prot) & _PAGE_WIRED)
+		tlb_unwire_entry();
+
+	set_pte(pte, pfn_pte(0, __pgprot(0)));
+	local_flush_tlb_one(get_asid(), addr);
 }
 
-/*
- * As a performance optimization, other platforms preserve the fixmap mapping
- * across a context switch, we don't presently do this, but this could be done
- * in a similar fashion as to the wired TLB interface that sh64 uses (by way
- * of the memory mapped UTLB configuration) -- this unfortunately forces us to
- * give up a TLB entry for each mapping we want to preserve. While this may be
- * viable for a small number of fixmaps, it's not particularly useful for
- * everything and needs to be carefully evaluated. (ie, we may want this for
- * the vsyscall page).
- *
- * XXX: Perhaps add a _PAGE_WIRED flag or something similar that we can pass
- * in at __set_fixmap() time to determine the appropriate behavior to follow.
- *
- *					 -- PFM.
- */
 void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 {
 	unsigned long address = __fix_to_virt(idx);
@@ -101,6 +113,18 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 	set_pte_phys(address, phys, prot);
 }
 
+void __clear_fixmap(enum fixed_addresses idx, pgprot_t prot)
+{
+	unsigned long address = __fix_to_virt(idx);
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+
+	clear_pte_phys(address, prot);
+}
+
 void __init page_table_range_init(unsigned long start, unsigned long end,
 					 pgd_t *pgd_base)
 {
@@ -120,7 +144,13 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
 		pud = (pud_t *)pgd;
 		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+#ifdef __PAGETABLE_PMD_FOLDED
 			pmd = (pmd_t *)pud;
+#else
+			pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+			pud_populate(&init_mm, pud, pmd);
+			pmd += k;
+#endif
 			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
 				if (pmd_none(*pmd)) {
 					pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
@@ -136,15 +166,166 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 }
 #endif	/* CONFIG_MMU */
 
-/*
- * paging_init() sets up the page tables
- */
+void __init allocate_pgdat(unsigned int nid)
+{
+	unsigned long start_pfn, end_pfn;
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	unsigned long phys;
+#endif
+
+	get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	phys = __memblock_alloc_base(sizeof(struct pglist_data),
+				SMP_CACHE_BYTES, end_pfn << PAGE_SHIFT);
+	/* Retry with all of system memory */
+	if (!phys)
+		phys = __memblock_alloc_base(sizeof(struct pglist_data),
+					SMP_CACHE_BYTES, memblock_end_of_DRAM());
+	if (!phys)
+		panic("Can't allocate pgdat for node %d\n", nid);
+
+	NODE_DATA(nid) = __va(phys);
+	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+#endif
+
+	NODE_DATA(nid)->node_start_pfn = start_pfn;
+	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
+}
+
+static void __init bootmem_init_one_node(unsigned int nid)
+{
+	unsigned long total_pages, paddr;
+	unsigned long end_pfn;
+	struct pglist_data *p;
+	int i;
+
+	p = NODE_DATA(nid);
+
+	/* Nothing to do.. */
+	if (!p->node_spanned_pages)
+		return;
+
+	end_pfn = p->node_start_pfn + p->node_spanned_pages;
+
+	total_pages = bootmem_bootmap_pages(p->node_spanned_pages);
+
+	paddr = memblock_alloc(total_pages << PAGE_SHIFT, PAGE_SIZE);
+	if (!paddr)
+		panic("Can't allocate bootmap for nid[%d]\n", nid);
+
+	init_bootmem_node(p, paddr >> PAGE_SHIFT, p->node_start_pfn, end_pfn);
+
+	free_bootmem_with_active_regions(nid, end_pfn);
+
+	/*
+	 * XXX Handle initial reservations for the system memory node
+	 * only for the moment, we'll refactor this later for handling
+	 * reservations in other nodes.
+	 */
+	if (nid == 0) {
+		/* Reserve the sections we're already using. */
+		for (i = 0; i < memblock.reserved.cnt; i++)
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
+					BOOTMEM_DEFAULT);
+	}
+
+	sparse_memory_present_with_active_regions(nid);
+}
+
+static void __init do_init_bootmem(void)
+{
+	int i;
+
+	/* Add active regions with valid PFNs. */
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long start_pfn, end_pfn;
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
+		__add_active_range(0, start_pfn, end_pfn);
+	}
+
+	/* All of system RAM sits in node 0 for the non-NUMA case */
+	allocate_pgdat(0);
+	node_set_online(0);
+
+	plat_mem_setup();
+
+	for_each_online_node(i)
+		bootmem_init_one_node(i);
+
+	sparse_init();
+}
+
+static void __init early_reserve_mem(void)
+{
+	unsigned long start_pfn;
+
+	/*
+	 * Partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	start_pfn = PFN_UP(__pa(_end));
+
+	/*
+	 * Reserve the kernel text and Reserve the bootmem bitmap. We do
+	 * this in two steps (first step was init_bootmem()), because
+	 * this catches the (definitely buggy) case of us accidentally
+	 * initializing the bootmem allocator with an invalid RAM area.
+	 */
+	memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
+		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+
+	/*
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
+	 */
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+
+	/*
+	 * Handle additional early reservations
+	 */
+	check_for_initrd();
+	reserve_crashkernel();
+}
+
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	unsigned long vaddr, end;
 	int nid;
 
+	memblock_init();
+
+	sh_mv.mv_mem_init();
+
+	early_reserve_mem();
+
+	memblock_enforce_memory_limit(memory_limit);
+	memblock_analyze();
+
+	memblock_dump_all();
+
+	/*
+	 * Determine low and high memory ranges:
+	 */
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
+
+	nodes_clear(node_online_map);
+
+	memory_start = (unsigned long)__va(__MEMORY_START);
+	memory_end = memory_start + (memory_limit ?: memblock_phys_mem_size());
+
+	uncached_init();
+	pmb_init();
+	do_init_bootmem();
+	ioremap_fixed_init();
+
 	/* We don't need to map the kernel through the TLB, as
 	 * it is permanatly mapped using P1. So clear the
 	 * entire pgd. */
@@ -182,9 +363,6 @@ void __init paging_init(void)
 	}
 
 	free_area_init_nodes(max_zone_pfns);
-
-	/* Set up the uncached fixmap */
-	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
 }
 
 /*
@@ -195,6 +373,8 @@ static void __init iommu_init(void)
 	no_iommu_init();
 }
 
+unsigned int mem_init_done = 0;
+
 void __init mem_init(void)
 {
 	int codesize, datasize, initsize;
@@ -231,6 +411,8 @@ void __init mem_init(void)
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
 
+	vsyscall_init();
+
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
@@ -243,8 +425,48 @@ void __init mem_init(void)
 		datasize >> 10,
 		initsize >> 10);
 
-	/* Initialize the vDSO */
-	vsyscall_init();
+	printk(KERN_INFO "virtual kernel memory layout:\n"
+		"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_HIGHMEM
+		"    pkmap   : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#endif
+		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB) (cached)\n"
+#ifdef CONFIG_UNCACHED_MAPPING
+		"            : 0x%08lx - 0x%08lx   (%4ld MB) (uncached)\n"
+#endif
+		"      .init : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+		"      .data : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+		"      .text : 0x%08lx - 0x%08lx   (%4ld kB)\n",
+		FIXADDR_START, FIXADDR_TOP,
+		(FIXADDR_TOP - FIXADDR_START) >> 10,
+
+#ifdef CONFIG_HIGHMEM
+		PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE,
+		(LAST_PKMAP*PAGE_SIZE) >> 10,
+#endif
+
+		(unsigned long)VMALLOC_START, VMALLOC_END,
+		(VMALLOC_END - VMALLOC_START) >> 20,
+
+		(unsigned long)memory_start, (unsigned long)high_memory,
+		((unsigned long)high_memory - (unsigned long)memory_start) >> 20,
+
+#ifdef CONFIG_UNCACHED_MAPPING
+		uncached_start, uncached_end, uncached_size >> 20,
+#endif
+
+		(unsigned long)&__init_begin, (unsigned long)&__init_end,
+		((unsigned long)&__init_end -
+		 (unsigned long)&__init_begin) >> 10,
+
+		(unsigned long)&_etext, (unsigned long)&_edata,
+		((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
+
+		(unsigned long)&_text, (unsigned long)&_etext,
+		((unsigned long)&_etext - (unsigned long)&_text) >> 10);
+
+	mem_init_done = 1;
 }
 
 void free_initmem(void)
@@ -277,35 +499,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-#if THREAD_SHIFT < PAGE_SHIFT
-static struct kmem_cache *thread_info_cache;
-
-struct thread_info *alloc_thread_info(struct task_struct *tsk)
-{
-	struct thread_info *ti;
-
-	ti = kmem_cache_alloc(thread_info_cache, GFP_KERNEL);
-	if (unlikely(ti == NULL))
-		return NULL;
-#ifdef CONFIG_DEBUG_STACK_USAGE
-	memset(ti, 0, THREAD_SIZE);
-#endif
-	return ti;
-}
-
-void free_thread_info(struct thread_info *ti)
-{
-	kmem_cache_free(thread_info_cache, ti);
-}
-
-void thread_info_cache_init(void)
-{
-	thread_info_cache = kmem_cache_create("thread_info", THREAD_SIZE,
-					      THREAD_SIZE, 0, NULL);
-	BUG_ON(thread_info_cache == NULL);
-}
-#endif /* THREAD_SHIFT < PAGE_SHIFT */
-
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size)
 {
@@ -336,10 +529,3 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 #endif
 
 #endif /* CONFIG_MEMORY_HOTPLUG */
-
-#ifdef CONFIG_PMB
-int __in_29bit_mode(void)
-{
-	return !(ctrl_inl(PMB_PASCR) & PASCR_SE);
-}
-#endif /* CONFIG_PMB */
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
new file mode 100644
index 0000000..0c99ec2
--- /dev/null
+++ b/arch/sh/mm/ioremap.c
@@ -0,0 +1,137 @@
+/*
+ * arch/sh/mm/ioremap.c
+ *
+ * (C) Copyright 1995 1996 Linus Torvalds
+ * (C) Copyright 2005 - 2010  Paul Mundt
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ * This is needed for high PCI addresses that aren't mapped in the
+ * 640k-1MB IO memory area on PC's
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem * __init_refok
+__ioremap_caller(phys_addr_t phys_addr, unsigned long size,
+		 pgprot_t pgprot, void *caller)
+{
+	struct vm_struct *area;
+	unsigned long offset, last_addr, addr, orig_addr;
+	void __iomem *mapped;
+
+	/* Don't allow wraparound or zero size */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr)
+		return NULL;
+
+	/*
+	 * If we can't yet use the regular approach, go the fixmap route.
+	 */
+	if (!mem_init_done)
+		return ioremap_fixed(phys_addr, size, pgprot);
+
+	/*
+	 * First try to remap through the PMB.
+	 * PMB entries are all pre-faulted.
+	 */
+	mapped = pmb_remap_caller(phys_addr, size, pgprot, caller);
+	if (mapped && !IS_ERR(mapped))
+		return mapped;
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+	/*
+	 * Ok, go for it..
+	 */
+	area = get_vm_area_caller(size, VM_IOREMAP, caller);
+	if (!area)
+		return NULL;
+	area->phys_addr = phys_addr;
+	orig_addr = addr = (unsigned long)area->addr;
+
+	if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
+		vunmap((void *)orig_addr);
+		return NULL;
+	}
+
+	return (void __iomem *)(offset + (char *)orig_addr);
+}
+EXPORT_SYMBOL(__ioremap_caller);
+
+/*
+ * Simple checks for non-translatable mappings.
+ */
+static inline int iomapping_nontranslatable(unsigned long offset)
+{
+#ifdef CONFIG_29BIT
+	/*
+	 * In 29-bit mode this includes the fixed P1/P2 areas, as well as
+	 * parts of P3.
+	 */
+	if (PXSEG(offset) < P3SEG || offset >= P3_ADDR_MAX)
+		return 1;
+#endif
+
+	return 0;
+}
+
+void __iounmap(void __iomem *addr)
+{
+	unsigned long vaddr = (unsigned long __force)addr;
+	struct vm_struct *p;
+
+	/*
+	 * Nothing to do if there is no translatable mapping.
+	 */
+	if (iomapping_nontranslatable(vaddr))
+		return;
+
+	/*
+	 * There's no VMA if it's from an early fixed mapping.
+	 */
+	if (iounmap_fixed(addr) == 0)
+		return;
+
+	/*
+	 * If the PMB handled it, there's nothing else to do.
+	 */
+	if (pmb_unmap(addr) == 0)
+		return;
+
+	p = remove_vm_area((void *)(vaddr & PAGE_MASK));
+	if (!p) {
+		printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
+		return;
+	}
+
+	kfree(p);
+}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
deleted file mode 100644
index 2141bef..0000000
--- a/arch/sh/mm/ioremap_32.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * arch/sh/mm/ioremap.c
- *
- * Re-map IO memory to kernel address space so that we can access it.
- * This is needed for high PCI addresses that aren't mapped in the
- * 640k-1MB IO memory area on PC's
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2005, 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem *__ioremap_caller(unsigned long phys_addr, unsigned long size,
-			       unsigned long flags, void *caller)
-{
-	struct vm_struct *area;
-	unsigned long offset, last_addr, addr, orig_addr;
-	pgprot_t pgprot;
-
-	/* Don't allow wraparound or zero size */
-	last_addr = phys_addr + size - 1;
-	if (!size || last_addr < phys_addr)
-		return NULL;
-
-	/*
-	 * If we're in the fixed PCI memory range, mapping through page
-	 * tables is not only pointless, but also fundamentally broken.
-	 * Just return the physical address instead.
-	 *
-	 * For boards that map a small PCI memory aperture somewhere in
-	 * P1/P2 space, ioremap() will already do the right thing,
-	 * and we'll never get this far.
-	 */
-	if (is_pci_memory_fixed_range(phys_addr, size))
-		return (void __iomem *)phys_addr;
-
-	/*
-	 * Mappings have to be page-aligned
-	 */
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-	size = PAGE_ALIGN(last_addr+1) - phys_addr;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_vm_area_caller(size, VM_IOREMAP, caller);
-	if (!area)
-		return NULL;
-	area->phys_addr = phys_addr;
-	orig_addr = addr = (unsigned long)area->addr;
-
-#ifdef CONFIG_PMB
-	/*
-	 * First try to remap through the PMB once a valid VMA has been
-	 * established. Smaller allocations (or the rest of the size
-	 * remaining after a PMB mapping due to the size not being
-	 * perfectly aligned on a PMB size boundary) are then mapped
-	 * through the UTLB using conventional page tables.
-	 *
-	 * PMB entries are all pre-faulted.
-	 */
-	if (unlikely(phys_addr >= P1SEG)) {
-		unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
-
-		if (likely(mapped)) {
-			addr		+= mapped;
-			phys_addr	+= mapped;
-			size		-= mapped;
-		}
-	}
-#endif
-
-	pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags);
-	if (likely(size))
-		if (ioremap_page_range(addr, addr + size, phys_addr, pgprot)) {
-			vunmap((void *)orig_addr);
-			return NULL;
-		}
-
-	return (void __iomem *)(offset + (char *)orig_addr);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-void __iounmap(void __iomem *addr)
-{
-	unsigned long vaddr = (unsigned long __force)addr;
-	unsigned long seg = PXSEG(vaddr);
-	struct vm_struct *p;
-
-	if (seg < P3SEG || vaddr >= P3_ADDR_MAX)
-		return;
-	if (is_pci_memory_fixed_range(vaddr, 0))
-		return;
-
-#ifdef CONFIG_PMB
-	/*
-	 * Purge any PMB entries that may have been established for this
-	 * mapping, then proceed with conventional VMA teardown.
-	 *
-	 * XXX: Note that due to the way that remove_vm_area() does
-	 * matching of the resultant VMA, we aren't able to fast-forward
-	 * the address past the PMB space until the end of the VMA where
-	 * the page tables reside. As such, unmap_vm_area() will be
-	 * forced to linearly scan over the area until it finds the page
-	 * tables where PTEs that need to be unmapped actually reside,
-	 * which is far from optimal. Perhaps we need to use a separate
-	 * VMA for the PMB mappings?
-	 *					-- PFM.
-	 */
-	pmb_unmap(vaddr);
-#endif
-
-	p = remove_vm_area((void *)(vaddr & PAGE_MASK));
-	if (!p) {
-		printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
-		return;
-	}
-
-	kfree(p);
-}
-EXPORT_SYMBOL(__iounmap);
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
deleted file mode 100644
index ef43465..0000000
--- a/arch/sh/mm/ioremap_64.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * arch/sh/mm/ioremap_64.c
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * Mostly derived from arch/sh/mm/ioremap.c which, in turn is mostly
- * derived from arch/i386/mm/ioremap.c .
- *
- *   (C) Copyright 1995 1996 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/vmalloc.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/bootmem.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/addrspace.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-static struct resource shmedia_iomap = {
-	.name	= "shmedia_iomap",
-	.start	= IOBASE_VADDR + PAGE_SIZE,
-	.end	= IOBASE_END - 1,
-};
-
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
-			      unsigned long flags);
-static void shmedia_unmapioaddr(unsigned long vaddr);
-static void __iomem *shmedia_ioremap(struct resource *res, u32 pa,
-				     int sz, unsigned long flags);
-
-/*
- * We have the same problem as the SPARC, so lets have the same comment:
- * Our mini-allocator...
- * Boy this is gross! We need it because we must map I/O for
- * timers and interrupt controller before the kmalloc is available.
- */
-
-#define XNMLN  15
-#define XNRES  10
-
-struct xresource {
-	struct resource xres;   /* Must be first */
-	int xflag;              /* 1 == used */
-	char xname[XNMLN+1];
-};
-
-static struct xresource xresv[XNRES];
-
-static struct xresource *xres_alloc(void)
-{
-	struct xresource *xrp;
-	int n;
-
-	xrp = xresv;
-	for (n = 0; n < XNRES; n++) {
-		if (xrp->xflag == 0) {
-			xrp->xflag = 1;
-			return xrp;
-		}
-		xrp++;
-	}
-	return NULL;
-}
-
-static void xres_free(struct xresource *xrp)
-{
-	xrp->xflag = 0;
-}
-
-static struct resource *shmedia_find_resource(struct resource *root,
-					      unsigned long vaddr)
-{
-	struct resource *res;
-
-	for (res = root->child; res; res = res->sibling)
-		if (res->start <= vaddr && res->end >= vaddr)
-			return res;
-
-	return NULL;
-}
-
-static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
-				      const char *name, unsigned long flags)
-{
-	struct xresource *xres;
-	struct resource *res;
-	char *tack;
-	int tlen;
-
-	if (name == NULL)
-		name = "???";
-
-	xres = xres_alloc();
-	if (xres != 0) {
-		tack = xres->xname;
-		res = &xres->xres;
-	} else {
-		printk_once(KERN_NOTICE "%s: done with statics, "
-			       "switching to kmalloc\n", __func__);
-		tlen = strlen(name);
-		tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
-		if (!tack)
-			return NULL;
-		memset(tack, 0, sizeof(struct resource));
-		res = (struct resource *) tack;
-		tack += sizeof(struct resource);
-	}
-
-	strncpy(tack, name, XNMLN);
-	tack[XNMLN] = 0;
-	res->name = tack;
-
-	return shmedia_ioremap(res, phys, size, flags);
-}
-
-static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, int sz,
-				     unsigned long flags)
-{
-	unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
-	unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK;
-	unsigned long va;
-	unsigned int psz;
-
-	if (allocate_resource(&shmedia_iomap, res, round_sz,
-			      shmedia_iomap.start, shmedia_iomap.end,
-			      PAGE_SIZE, NULL, NULL) != 0) {
-		panic("alloc_io_res(%s): cannot occupy\n",
-		      (res->name != NULL) ? res->name : "???");
-	}
-
-	va = res->start;
-	pa &= PAGE_MASK;
-
-	psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
-	for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
-		shmedia_mapioaddr(pa, va, flags);
-		va += PAGE_SIZE;
-		pa += PAGE_SIZE;
-	}
-
-	return (void __iomem *)(unsigned long)(res->start + offset);
-}
-
-static void shmedia_free_io(struct resource *res)
-{
-	unsigned long len = res->end - res->start + 1;
-
-	BUG_ON((len & (PAGE_SIZE - 1)) != 0);
-
-	while (len) {
-		len -= PAGE_SIZE;
-		shmedia_unmapioaddr(res->start + len);
-	}
-
-	release_resource(res);
-}
-
-static __init_refok void *sh64_get_page(void)
-{
-	void *page;
-
-	if (slab_is_available())
-		page = (void *)get_zeroed_page(GFP_KERNEL);
-	else
-		page = alloc_bootmem_pages(PAGE_SIZE);
-
-	if (!page || ((unsigned long)page & ~PAGE_MASK))
-		panic("sh64_get_page: Out of memory already?\n");
-
-	return page;
-}
-
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
-			      unsigned long flags)
-{
-	pgd_t *pgdp;
-	pud_t *pudp;
-	pmd_t *pmdp;
-	pte_t *ptep, pte;
-	pgprot_t prot;
-
-	pr_debug("shmedia_mapiopage pa %08lx va %08lx\n",  pa, va);
-
-	if (!flags)
-		flags = 1; /* 1 = CB0-1 device */
-
-	pgdp = pgd_offset_k(va);
-	if (pgd_none(*pgdp) || !pgd_present(*pgdp)) {
-		pudp = (pud_t *)sh64_get_page();
-		set_pgd(pgdp, __pgd((unsigned long)pudp | _KERNPG_TABLE));
-	}
-
-	pudp = pud_offset(pgdp, va);
-	if (pud_none(*pudp) || !pud_present(*pudp)) {
-		pmdp = (pmd_t *)sh64_get_page();
-		set_pud(pudp, __pud((unsigned long)pmdp | _KERNPG_TABLE));
-	}
-
-	pmdp = pmd_offset(pudp, va);
-	if (pmd_none(*pmdp) || !pmd_present(*pmdp)) {
-		ptep = (pte_t *)sh64_get_page();
-		set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE));
-	}
-
-	prot = __pgprot(_PAGE_PRESENT | _PAGE_READ     | _PAGE_WRITE  |
-			_PAGE_DIRTY   | _PAGE_ACCESSED | _PAGE_SHARED | flags);
-
-	pte = pfn_pte(pa >> PAGE_SHIFT, prot);
-	ptep = pte_offset_kernel(pmdp, va);
-
-	if (!pte_none(*ptep) &&
-	    pte_val(*ptep) != pte_val(pte))
-		pte_ERROR(*ptep);
-
-	set_pte(ptep, pte);
-
-	flush_tlb_kernel_range(va, PAGE_SIZE);
-}
-
-static void shmedia_unmapioaddr(unsigned long vaddr)
-{
-	pgd_t *pgdp;
-	pud_t *pudp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-
-	pgdp = pgd_offset_k(vaddr);
-	if (pgd_none(*pgdp) || pgd_bad(*pgdp))
-		return;
-
-	pudp = pud_offset(pgdp, vaddr);
-	if (pud_none(*pudp) || pud_bad(*pudp))
-		return;
-
-	pmdp = pmd_offset(pudp, vaddr);
-	if (pmd_none(*pmdp) || pmd_bad(*pmdp))
-		return;
-
-	ptep = pte_offset_kernel(pmdp, vaddr);
-
-	if (pte_none(*ptep) || !pte_present(*ptep))
-		return;
-
-	clear_page((void *)ptep);
-	pte_clear(&init_mm, vaddr, ptep);
-}
-
-void __iomem *__ioremap_caller(unsigned long offset, unsigned long size,
-			       unsigned long flags, void *caller)
-{
-	char name[14];
-
-	sprintf(name, "phys_%08x", (u32)offset);
-	return shmedia_alloc_io(offset, size, name, flags);
-}
-EXPORT_SYMBOL(__ioremap_caller);
-
-void __iounmap(void __iomem *virtual)
-{
-	unsigned long vaddr = (unsigned long)virtual & PAGE_MASK;
-	struct resource *res;
-	unsigned int psz;
-
-	res = shmedia_find_resource(&shmedia_iomap, vaddr);
-	if (!res) {
-		printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
-		       __func__, vaddr);
-		return;
-	}
-
-	psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
-	shmedia_free_io(res);
-
-	if ((char *)res >= (char *)xresv &&
-	    (char *)res <  (char *)&xresv[XNRES]) {
-		xres_free((struct xresource *)res);
-	} else {
-		kfree(res);
-	}
-}
-EXPORT_SYMBOL(__iounmap);
-
-static int
-ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
-		  void *data)
-{
-	char *p = buf, *e = buf + length;
-	struct resource *r;
-	const char *nm;
-
-	for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
-		if (p + 32 >= e)        /* Better than nothing */
-			break;
-		nm = r->name;
-		if (nm == NULL)
-			nm = "???";
-
-		p += sprintf(p, "%08lx-%08lx: %s\n",
-			     (unsigned long)r->start,
-			     (unsigned long)r->end, nm);
-	}
-
-	return p-buf;
-}
-
-static int __init register_proc_onchip(void)
-{
-	create_proc_read_entry("io_map", 0, 0, ioremap_proc_info,
-			       &shmedia_iomap);
-	return 0;
-}
-late_initcall(register_proc_onchip);
diff --git a/arch/sh/mm/ioremap_fixed.c b/arch/sh/mm/ioremap_fixed.c
new file mode 100644
index 0000000..efbe84a
--- /dev/null
+++ b/arch/sh/mm/ioremap_fixed.c
@@ -0,0 +1,134 @@
+/*
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * These functions should only be used when it is necessary to map a
+ * physical address space into the kernel address space before ioremap()
+ * can be used, e.g. early in boot before paging_init().
+ *
+ * Copyright (C) 2009  Matt Fleming
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/bootmem.h>
+#include <linux/proc_fs.h>
+#include <asm/fixmap.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+struct ioremap_map {
+	void __iomem *addr;
+	unsigned long size;
+	unsigned long fixmap_addr;
+};
+
+static struct ioremap_map ioremap_maps[FIX_N_IOREMAPS];
+
+void __init ioremap_fixed_init(void)
+{
+	struct ioremap_map *map;
+	int i;
+
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		map->fixmap_addr = __fix_to_virt(FIX_IOREMAP_BEGIN + i);
+	}
+}
+
+void __init __iomem *
+ioremap_fixed(phys_addr_t phys_addr, unsigned long size, pgprot_t prot)
+{
+	enum fixed_addresses idx0, idx;
+	struct ioremap_map *map;
+	unsigned int nrpages;
+	unsigned long offset;
+	int i, slot;
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(phys_addr + size) - phys_addr;
+
+	slot = -1;
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		if (!map->addr) {
+			map->size = size;
+			slot = i;
+			break;
+		}
+	}
+
+	if (slot < 0)
+		return NULL;
+
+	/*
+	 * Mappings have to fit in the FIX_IOREMAP area.
+	 */
+	nrpages = size >> PAGE_SHIFT;
+	if (nrpages > FIX_N_IOREMAPS)
+		return NULL;
+
+	/*
+	 * Ok, go for it..
+	 */
+	idx0 = FIX_IOREMAP_BEGIN + slot;
+	idx = idx0;
+	while (nrpages > 0) {
+		pgprot_val(prot) |= _PAGE_WIRED;
+		__set_fixmap(idx, phys_addr, prot);
+		phys_addr += PAGE_SIZE;
+		idx++;
+		--nrpages;
+	}
+
+	map->addr = (void __iomem *)(offset + map->fixmap_addr);
+	return map->addr;
+}
+
+int iounmap_fixed(void __iomem *addr)
+{
+	enum fixed_addresses idx;
+	struct ioremap_map *map;
+	unsigned int nrpages;
+	int i, slot;
+
+	slot = -1;
+	for (i = 0; i < FIX_N_IOREMAPS; i++) {
+		map = &ioremap_maps[i];
+		if (map->addr == addr) {
+			slot = i;
+			break;
+		}
+	}
+
+	/*
+	 * If we don't match, it's not for us.
+	 */
+	if (slot < 0)
+		return -EINVAL;
+
+	nrpages = map->size >> PAGE_SHIFT;
+
+	idx = FIX_IOREMAP_BEGIN + slot + nrpages - 1;
+	while (nrpages > 0) {
+		__clear_fixmap(idx, __pgprot(_PAGE_WIRED));
+		--idx;
+		--nrpages;
+	}
+
+	map->size = 0;
+	map->addr = NULL;
+
+	return 0;
+}
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
index ac16c05..7694f50 100644
--- a/arch/sh/mm/nommu.c
+++ b/arch/sh/mm/nommu.c
@@ -94,3 +94,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 {
 }
+
+void pgtable_cache_init(void)
+{
+}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 422e927..3d85225 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,7 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
 #include <linux/pfn.h>
@@ -24,44 +24,6 @@ EXPORT_SYMBOL_GPL(node_data);
  * latency. Each node's pgdat is node-local at the beginning of the node,
  * immediately followed by the node mem map.
  */
-void __init setup_memory(void)
-{
-	unsigned long free_pfn = PFN_UP(__pa(_end));
-	u64 base = min_low_pfn << PAGE_SHIFT;
-	u64 size = (max_low_pfn << PAGE_SHIFT) - base;
-
-	lmb_add(base, size);
-
-	/* Reserve the LMB regions used by the kernel, initrd, etc.. */
-	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
-		    (PFN_PHYS(free_pfn) + PAGE_SIZE - 1) -
-		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
-
-	/*
-	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
-	 */
-	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
-
-	lmb_analyze();
-	lmb_dump_all();
-
-	/*
-	 * Node 0 sets up its pgdat at the first available pfn,
-	 * and bumps it up before setting up the bootmem allocator.
-	 */
-	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
-	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
-	free_pfn += PFN_UP(sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &bootmem_node_data[0];
-
-	/* Set up node 0 */
-	setup_bootmem_allocator(free_pfn);
-
-	/* Give the platforms a chance to hook up their nodes */
-	plat_mem_setup();
-}
-
 void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 {
 	unsigned long bootmap_pages;
@@ -74,12 +36,15 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
 
-	lmb_add(start, end - start);
+	pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
+			 PAGE_KERNEL);
+
+	memblock_add(start, end - start);
 
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+	NODE_DATA(nid) = __va(memblock_alloc_base(sizeof(struct pglist_data),
 					     SMP_CACHE_BYTES, end));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
@@ -89,7 +54,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 
 	/* Node-local bootmap */
 	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+	bootmem_paddr = memblock_alloc_base(bootmap_pages << PAGE_SHIFT,
 				       PAGE_SIZE, end);
 	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
 			  start_pfn, end_pfn);
diff --git a/arch/sh/mm/pgtable.c b/arch/sh/mm/pgtable.c
new file mode 100644
index 0000000..26e03a1
--- /dev/null
+++ b/arch/sh/mm/pgtable.c
@@ -0,0 +1,57 @@
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#define PGALLOC_GFP GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO
+
+static struct kmem_cache *pgd_cachep;
+#if PAGETABLE_LEVELS > 2
+static struct kmem_cache *pmd_cachep;
+#endif
+
+void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+	       swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+void pgtable_cache_init(void)
+{
+	pgd_cachep = kmem_cache_create("pgd_cache",
+				       PTRS_PER_PGD * (1<<PTE_MAGNITUDE),
+				       PAGE_SIZE, SLAB_PANIC, pgd_ctor);
+#if PAGETABLE_LEVELS > 2
+	pmd_cachep = kmem_cache_create("pmd_cache",
+				       PTRS_PER_PMD * (1<<PTE_MAGNITUDE),
+				       PAGE_SIZE, SLAB_PANIC, NULL);
+#endif
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(pgd_cachep, PGALLOC_GFP);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	kmem_cache_free(pgd_cachep, pgd);
+}
+
+#if PAGETABLE_LEVELS > 2
+void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	set_pud(pud, __pud((unsigned long)pmd));
+}
+
+pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	return kmem_cache_alloc(pmd_cachep, PGALLOC_GFP);
+}
+
+void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	kmem_cache_free(pmd_cachep, pmd);
+}
+#endif /* PAGETABLE_LEVELS > 2 */
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 280f6a1..6379091 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -3,11 +3,8 @@
  *
  * Privileged Space Mapping Buffer (PMB) Support.
  *
- * Copyright (C) 2005, 2006, 2007 Paul Mundt
- *
- * P1/P2 Section mapping definitions from map32.h, which was:
- *
- *	Copyright 2003 (c) Lineo Solutions,Inc.
+ * Copyright (C) 2005 - 2010  Paul Mundt
+ * Copyright (C) 2010  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,53 +15,221 @@
 #include <linux/sysdev.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/debugfs.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
 #include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/vmalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
+#include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/io.h>
 #include <asm/mmu_context.h>
 
-#define NR_PMB_ENTRIES	16
+struct pmb_entry;
+
+struct pmb_entry {
+	unsigned long vpn;
+	unsigned long ppn;
+	unsigned long flags;
+	unsigned long size;
+
+	spinlock_t lock;
 
-static void __pmb_unmap(struct pmb_entry *);
+	/*
+	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+	 * PMB_NO_ENTRY to search for a free one
+	 */
+	int entry;
 
+	/* Adjacent entry link for contiguous multi-entry mappings */
+	struct pmb_entry *link;
+};
+
+static struct {
+	unsigned long size;
+	int flag;
+} pmb_sizes[] = {
+	{ .size	= SZ_512M, .flag = PMB_SZ_512M, },
+	{ .size = SZ_128M, .flag = PMB_SZ_128M, },
+	{ .size = SZ_64M,  .flag = PMB_SZ_64M,  },
+	{ .size = SZ_16M,  .flag = PMB_SZ_16M,  },
+};
+
+static void pmb_unmap_entry(struct pmb_entry *, int depth);
+
+static DEFINE_RWLOCK(pmb_rwlock);
 static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
-static unsigned long pmb_map;
+static DECLARE_BITMAP(pmb_map, NR_PMB_ENTRIES);
+
+static unsigned int pmb_iomapping_enabled;
 
-static inline unsigned long mk_pmb_entry(unsigned int entry)
+static __always_inline unsigned long mk_pmb_entry(unsigned int entry)
 {
 	return (entry & PMB_E_MASK) << PMB_E_SHIFT;
 }
 
-static inline unsigned long mk_pmb_addr(unsigned int entry)
+static __always_inline unsigned long mk_pmb_addr(unsigned int entry)
 {
 	return mk_pmb_entry(entry) | PMB_ADDR;
 }
 
-static inline unsigned long mk_pmb_data(unsigned int entry)
+static __always_inline unsigned long mk_pmb_data(unsigned int entry)
 {
 	return mk_pmb_entry(entry) | PMB_DATA;
 }
 
-static int pmb_alloc_entry(void)
+static __always_inline unsigned int pmb_ppn_in_range(unsigned long ppn)
+{
+	return ppn >= __pa(memory_start) && ppn < __pa(memory_end);
+}
+
+/*
+ * Ensure that the PMB entries match our cache configuration.
+ *
+ * When we are in 32-bit address extended mode, CCR.CB becomes
+ * invalid, so care must be taken to manually adjust cacheable
+ * translations.
+ */
+static __always_inline unsigned long pmb_cache_flags(void)
+{
+	unsigned long flags = 0;
+
+#if defined(CONFIG_CACHE_OFF)
+	flags |= PMB_WT | PMB_UB;
+#elif defined(CONFIG_CACHE_WRITETHROUGH)
+	flags |= PMB_C | PMB_WT | PMB_UB;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	flags |= PMB_C;
+#endif
+
+	return flags;
+}
+
+/*
+ * Convert typical pgprot value to the PMB equivalent
+ */
+static inline unsigned long pgprot_to_pmb_flags(pgprot_t prot)
+{
+	unsigned long pmb_flags = 0;
+	u64 flags = pgprot_val(prot);
+
+	if (flags & _PAGE_CACHABLE)
+		pmb_flags |= PMB_C;
+	if (flags & _PAGE_WT)
+		pmb_flags |= PMB_WT | PMB_UB;
+
+	return pmb_flags;
+}
+
+static inline bool pmb_can_merge(struct pmb_entry *a, struct pmb_entry *b)
+{
+	return (b->vpn == (a->vpn + a->size)) &&
+	       (b->ppn == (a->ppn + a->size)) &&
+	       (b->flags == a->flags);
+}
+
+static bool pmb_mapping_exists(unsigned long vaddr, phys_addr_t phys,
+			       unsigned long size)
+{
+	int i;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe, *iter;
+		unsigned long span;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		/*
+		 * See if VPN and PPN are bounded by an existing mapping.
+		 */
+		if ((vaddr < pmbe->vpn) || (vaddr >= (pmbe->vpn + pmbe->size)))
+			continue;
+		if ((phys < pmbe->ppn) || (phys >= (pmbe->ppn + pmbe->size)))
+			continue;
+
+		/*
+		 * Now see if we're in range of a simple mapping.
+		 */
+		if (size <= pmbe->size) {
+			read_unlock(&pmb_rwlock);
+			return true;
+		}
+
+		span = pmbe->size;
+
+		/*
+		 * Finally for sizes that involve compound mappings, walk
+		 * the chain.
+		 */
+		for (iter = pmbe->link; iter; iter = iter->link)
+			span += iter->size;
+
+		/*
+		 * Nothing else to do if the range requirements are met.
+		 */
+		if (size <= span) {
+			read_unlock(&pmb_rwlock);
+			return true;
+		}
+	}
+
+	read_unlock(&pmb_rwlock);
+	return false;
+}
+
+static bool pmb_size_valid(unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (pmb_sizes[i].size == size)
+			return true;
+
+	return false;
+}
+
+static inline bool pmb_addr_valid(unsigned long addr, unsigned long size)
 {
-	unsigned int pos;
+	return (addr >= P1SEG && (addr + size - 1) < P3SEG);
+}
 
-repeat:
-	pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
+static inline bool pmb_prot_valid(pgprot_t prot)
+{
+	return (pgprot_val(prot) & _PAGE_USER) == 0;
+}
+
+static int pmb_size_to_flags(unsigned long size)
+{
+	int i;
 
-	if (unlikely(pos > NR_PMB_ENTRIES))
-		return -ENOSPC;
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (pmb_sizes[i].size == size)
+			return pmb_sizes[i].flag;
 
-	if (test_and_set_bit(pos, &pmb_map))
-		goto repeat;
+	return 0;
+}
+
+static int pmb_alloc_entry(void)
+{
+	int pos;
+
+	pos = find_first_zero_bit(pmb_map, NR_PMB_ENTRIES);
+	if (pos >= 0 && pos < NR_PMB_ENTRIES)
+		__set_bit(pos, pmb_map);
+	else
+		pos = -ENOSPC;
 
 	return pos;
 }
@@ -73,21 +238,34 @@ static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
 				   unsigned long flags, int entry)
 {
 	struct pmb_entry *pmbe;
+	unsigned long irqflags;
+	void *ret = NULL;
 	int pos;
 
+	write_lock_irqsave(&pmb_rwlock, irqflags);
+
 	if (entry == PMB_NO_ENTRY) {
 		pos = pmb_alloc_entry();
-		if (pos < 0)
-			return ERR_PTR(pos);
+		if (unlikely(pos < 0)) {
+			ret = ERR_PTR(pos);
+			goto out;
+		}
 	} else {
-		if (test_bit(entry, &pmb_map))
-			return ERR_PTR(-ENOSPC);
+		if (__test_and_set_bit(entry, pmb_map)) {
+			ret = ERR_PTR(-ENOSPC);
+			goto out;
+		}
+
 		pos = entry;
 	}
 
+	write_unlock_irqrestore(&pmb_rwlock, irqflags);
+
 	pmbe = &pmb_entry_list[pos];
-	if (!pmbe)
-		return ERR_PTR(-ENOMEM);
+
+	memset(pmbe, 0, sizeof(struct pmb_entry));
+
+	spin_lock_init(&pmbe->lock);
 
 	pmbe->vpn	= vpn;
 	pmbe->ppn	= ppn;
@@ -95,169 +273,221 @@ static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
 	pmbe->entry	= pos;
 
 	return pmbe;
+
+out:
+	write_unlock_irqrestore(&pmb_rwlock, irqflags);
+	return ret;
 }
 
 static void pmb_free(struct pmb_entry *pmbe)
 {
-	int pos = pmbe->entry;
+	__clear_bit(pmbe->entry, pmb_map);
 
-	pmbe->vpn	= 0;
-	pmbe->ppn	= 0;
-	pmbe->flags	= 0;
-	pmbe->entry	= 0;
-
-	clear_bit(pos, &pmb_map);
+	pmbe->entry	= PMB_NO_ENTRY;
+	pmbe->link	= NULL;
 }
 
 /*
- * Must be in P2 for __set_pmb_entry()
+ * Must be run uncached.
  */
-static void __set_pmb_entry(unsigned long vpn, unsigned long ppn,
-			    unsigned long flags, int pos)
+static void __set_pmb_entry(struct pmb_entry *pmbe)
 {
-	ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
-
-#ifdef CONFIG_CACHE_WRITETHROUGH
-	/*
-	 * When we are in 32-bit address extended mode, CCR.CB becomes
-	 * invalid, so care must be taken to manually adjust cacheable
-	 * translations.
-	 */
-	if (likely(flags & PMB_C))
-		flags |= PMB_WT;
-#endif
+	unsigned long addr, data;
 
-	ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
-}
+	addr = mk_pmb_addr(pmbe->entry);
+	data = mk_pmb_data(pmbe->entry);
 
-static void __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
-{
 	jump_to_uncached();
-	__set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, pmbe->entry);
+
+	/* Set V-bit */
+	__raw_writel(pmbe->vpn | PMB_V, addr);
+	__raw_writel(pmbe->ppn | pmbe->flags | PMB_V, data);
+
 	back_to_cached();
 }
 
-static void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
+static void __clear_pmb_entry(struct pmb_entry *pmbe)
 {
-	unsigned int entry = pmbe->entry;
-	unsigned long addr;
+	unsigned long addr, data;
+	unsigned long addr_val, data_val;
 
-	if (unlikely(entry >= NR_PMB_ENTRIES))
-		return;
+	addr = mk_pmb_addr(pmbe->entry);
+	data = mk_pmb_data(pmbe->entry);
 
-	jump_to_uncached();
+	addr_val = __raw_readl(addr);
+	data_val = __raw_readl(data);
 
 	/* Clear V-bit */
-	addr = mk_pmb_addr(entry);
-	ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
-
-	addr = mk_pmb_data(entry);
-	ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
-
-	back_to_cached();
+	writel_uncached(addr_val & ~PMB_V, addr);
+	writel_uncached(data_val & ~PMB_V, data);
 }
 
+#ifdef CONFIG_PM
+static void set_pmb_entry(struct pmb_entry *pmbe)
+{
+	unsigned long flags;
 
-static struct {
-	unsigned long size;
-	int flag;
-} pmb_sizes[] = {
-	{ .size	= 0x20000000, .flag = PMB_SZ_512M, },
-	{ .size = 0x08000000, .flag = PMB_SZ_128M, },
-	{ .size = 0x04000000, .flag = PMB_SZ_64M,  },
-	{ .size = 0x01000000, .flag = PMB_SZ_16M,  },
-};
+	spin_lock_irqsave(&pmbe->lock, flags);
+	__set_pmb_entry(pmbe);
+	spin_unlock_irqrestore(&pmbe->lock, flags);
+}
+#endif /* CONFIG_PM */
 
-long pmb_remap(unsigned long vaddr, unsigned long phys,
-	       unsigned long size, unsigned long flags)
+int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
+		     unsigned long size, pgprot_t prot)
 {
 	struct pmb_entry *pmbp, *pmbe;
-	unsigned long wanted;
-	int pmb_flags, i;
-	long err;
-
-	/* Convert typical pgprot value to the PMB equivalent */
-	if (flags & _PAGE_CACHABLE) {
-		if (flags & _PAGE_WT)
-			pmb_flags = PMB_WT;
-		else
-			pmb_flags = PMB_C;
-	} else
-		pmb_flags = PMB_WT | PMB_UB;
+	unsigned long orig_addr, orig_size;
+	unsigned long flags, pmb_flags;
+	int i, mapped;
 
+	if (size < SZ_16M)
+		return -EINVAL;
+	if (!pmb_addr_valid(vaddr, size))
+		return -EFAULT;
+	if (pmb_mapping_exists(vaddr, phys, size))
+		return 0;
+
+	orig_addr = vaddr;
+	orig_size = size;
+
+	flush_tlb_kernel_range(vaddr, vaddr + size);
+
+	pmb_flags = pgprot_to_pmb_flags(prot);
 	pmbp = NULL;
-	wanted = size;
 
-again:
-	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
-		if (size < pmb_sizes[i].size)
-			continue;
+	do {
+		for (i = mapped = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
+			if (size < pmb_sizes[i].size)
+				continue;
+
+			pmbe = pmb_alloc(vaddr, phys, pmb_flags |
+					 pmb_sizes[i].flag, PMB_NO_ENTRY);
+			if (IS_ERR(pmbe)) {
+				pmb_unmap_entry(pmbp, mapped);
+				return PTR_ERR(pmbe);
+			}
 
-		pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag,
-				 PMB_NO_ENTRY);
-		if (IS_ERR(pmbe)) {
-			err = PTR_ERR(pmbe);
-			goto out;
+			spin_lock_irqsave(&pmbe->lock, flags);
+
+			pmbe->size = pmb_sizes[i].size;
+
+			__set_pmb_entry(pmbe);
+
+			phys	+= pmbe->size;
+			vaddr	+= pmbe->size;
+			size	-= pmbe->size;
+
+			/*
+			 * Link adjacent entries that span multiple PMB
+			 * entries for easier tear-down.
+			 */
+			if (likely(pmbp)) {
+				spin_lock(&pmbp->lock);
+				pmbp->link = pmbe;
+				spin_unlock(&pmbp->lock);
+			}
+
+			pmbp = pmbe;
+
+			/*
+			 * Instead of trying smaller sizes on every
+			 * iteration (even if we succeed in allocating
+			 * space), try using pmb_sizes[i].size again.
+			 */
+			i--;
+			mapped++;
+
+			spin_unlock_irqrestore(&pmbe->lock, flags);
 		}
+	} while (size >= SZ_16M);
 
-		set_pmb_entry(pmbe);
+	flush_cache_vmap(orig_addr, orig_addr + orig_size);
 
-		phys	+= pmb_sizes[i].size;
-		vaddr	+= pmb_sizes[i].size;
-		size	-= pmb_sizes[i].size;
+	return 0;
+}
 
-		/*
-		 * Link adjacent entries that span multiple PMB entries
-		 * for easier tear-down.
-		 */
-		if (likely(pmbp))
-			pmbp->link = pmbe;
+void __iomem *pmb_remap_caller(phys_addr_t phys, unsigned long size,
+			       pgprot_t prot, void *caller)
+{
+	unsigned long vaddr;
+	phys_addr_t offset, last_addr;
+	phys_addr_t align_mask;
+	unsigned long aligned;
+	struct vm_struct *area;
+	int i, ret;
 
-		pmbp = pmbe;
+	if (!pmb_iomapping_enabled)
+		return NULL;
 
-		/*
-		 * Instead of trying smaller sizes on every iteration
-		 * (even if we succeed in allocating space), try using
-		 * pmb_sizes[i].size again.
-		 */
-		i--;
-	}
+	/*
+	 * Small mappings need to go through the TLB.
+	 */
+	if (size < SZ_16M)
+		return ERR_PTR(-EINVAL);
+	if (!pmb_prot_valid(prot))
+		return ERR_PTR(-EINVAL);
 
-	if (size >= 0x1000000)
-		goto again;
+	for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++)
+		if (size >= pmb_sizes[i].size)
+			break;
 
-	return wanted - size;
+	last_addr = phys + size;
+	align_mask = ~(pmb_sizes[i].size - 1);
+	offset = phys & ~align_mask;
+	phys &= align_mask;
+	aligned = ALIGN(last_addr, pmb_sizes[i].size) - phys;
 
-out:
-	if (pmbp)
-		__pmb_unmap(pmbp);
+	/*
+	 * XXX: This should really start from uncached_end, but this
+	 * causes the MMU to reset, so for now we restrict it to the
+	 * 0xb000...0xc000 range.
+	 */
+	area = __get_vm_area_caller(aligned, VM_IOREMAP, 0xb0000000,
+				    P3SEG, caller);
+	if (!area)
+		return NULL;
+
+	area->phys_addr = phys;
+	vaddr = (unsigned long)area->addr;
 
-	return err;
+	ret = pmb_bolt_mapping(vaddr, phys, size, prot);
+	if (unlikely(ret != 0))
+		return ERR_PTR(ret);
+
+	return (void __iomem *)(offset + (char *)vaddr);
 }
 
-void pmb_unmap(unsigned long addr)
+int pmb_unmap(void __iomem *addr)
 {
 	struct pmb_entry *pmbe = NULL;
-	int i;
+	unsigned long vaddr = (unsigned long __force)addr;
+	int i, found = 0;
+
+	read_lock(&pmb_rwlock);
 
 	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
-		if (test_bit(i, &pmb_map)) {
+		if (test_bit(i, pmb_map)) {
 			pmbe = &pmb_entry_list[i];
-			if (pmbe->vpn == addr)
+			if (pmbe->vpn == vaddr) {
+				found = 1;
 				break;
+			}
 		}
 	}
 
-	if (unlikely(!pmbe))
-		return;
+	read_unlock(&pmb_rwlock);
 
-	__pmb_unmap(pmbe);
+	if (found) {
+		pmb_unmap_entry(pmbe, NR_PMB_ENTRIES);
+		return 0;
+	}
+
+	return -EINVAL;
 }
 
-static void __pmb_unmap(struct pmb_entry *pmbe)
+static void __pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
 {
-	BUG_ON(!test_bit(pmbe->entry, &pmb_map));
-
 	do {
 		struct pmb_entry *pmblink = pmbe;
 
@@ -268,102 +498,321 @@ static void __pmb_unmap(struct pmb_entry *pmbe)
 		 * this entry in pmb_alloc() (even if we haven't filled
 		 * it yet).
 		 *
-		 * Therefore, calling clear_pmb_entry() is safe as no
+		 * Therefore, calling __clear_pmb_entry() is safe as no
 		 * other mapping can be using that slot.
 		 */
-		clear_pmb_entry(pmbe);
+		__clear_pmb_entry(pmbe);
+
+		flush_cache_vunmap(pmbe->vpn, pmbe->vpn + pmbe->size);
 
 		pmbe = pmblink->link;
 
 		pmb_free(pmblink);
-	} while (pmbe);
+	} while (pmbe && --depth);
 }
 
-#ifdef CONFIG_PMB
-int __uses_jump_to_uncached pmb_init(void)
+static void pmb_unmap_entry(struct pmb_entry *pmbe, int depth)
 {
-	unsigned int i;
-	long size, ret;
+	unsigned long flags;
 
-	jump_to_uncached();
+	if (unlikely(!pmbe))
+		return;
+
+	write_lock_irqsave(&pmb_rwlock, flags);
+	__pmb_unmap_entry(pmbe, depth);
+	write_unlock_irqrestore(&pmb_rwlock, flags);
+}
+
+static void __init pmb_notify(void)
+{
+	int i;
+
+	pr_info("PMB: boot mappings:\n");
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		pr_info("       0x%08lx -> 0x%08lx [ %4ldMB %2scached ]\n",
+			pmbe->vpn >> PAGE_SHIFT, pmbe->ppn >> PAGE_SHIFT,
+			pmbe->size >> 20, (pmbe->flags & PMB_C) ? "" : "un");
+	}
+
+	read_unlock(&pmb_rwlock);
+}
+
+/*
+ * Sync our software copy of the PMB mappings with those in hardware. The
+ * mappings in the hardware PMB were either set up by the bootloader or
+ * very early on by the kernel.
+ */
+static void __init pmb_synchronize(void)
+{
+	struct pmb_entry *pmbp = NULL;
+	int i, j;
 
 	/*
-	 * Insert PMB entries for the P1 and P2 areas so that, after
-	 * we've switched the MMU to 32-bit mode, the semantics of P1
-	 * and P2 are the same as in 29-bit mode, e.g.
+	 * Run through the initial boot mappings, log the established
+	 * ones, and blow away anything that falls outside of the valid
+	 * PPN range. Specifically, we only care about existing mappings
+	 * that impact the cached/uncached sections.
+	 *
+	 * Note that touching these can be a bit of a minefield; the boot
+	 * loader can establish multi-page mappings with the same caching
+	 * attributes, so we need to ensure that we aren't modifying a
+	 * mapping that we're presently executing from, or may execute
+	 * from in the case of straddling page boundaries.
 	 *
-	 *	P1 - provides a cached window onto physical memory
-	 *	P2 - provides an uncached window onto physical memory
+	 * In the future we will have to tidy up after the boot loader by
+	 * jumping between the cached and uncached mappings and tearing
+	 * down alternating mappings while executing from the other.
 	 */
-	size = __MEMORY_START + __MEMORY_SIZE;
+	for (i = 0; i < NR_PMB_ENTRIES; i++) {
+		unsigned long addr, data;
+		unsigned long addr_val, data_val;
+		unsigned long ppn, vpn, flags;
+		unsigned long irqflags;
+		unsigned int size;
+		struct pmb_entry *pmbe;
 
-	ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
-	BUG_ON(ret != size);
+		addr = mk_pmb_addr(i);
+		data = mk_pmb_data(i);
 
-	ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
-	BUG_ON(ret != size);
+		addr_val = __raw_readl(addr);
+		data_val = __raw_readl(data);
 
-	ctrl_outl(0, PMB_IRMCR);
+		/*
+		 * Skip over any bogus entries
+		 */
+		if (!(data_val & PMB_V) || !(addr_val & PMB_V))
+			continue;
 
-	/* PMB.SE and UB[7] */
-	ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
+		ppn = data_val & PMB_PFN_MASK;
+		vpn = addr_val & PMB_PFN_MASK;
 
-	/* Flush out the TLB */
-	i =  ctrl_inl(MMUCR);
-	i |= MMUCR_TI;
-	ctrl_outl(i, MMUCR);
+		/*
+		 * Only preserve in-range mappings.
+		 */
+		if (!pmb_ppn_in_range(ppn)) {
+			/*
+			 * Invalidate anything out of bounds.
+			 */
+			writel_uncached(addr_val & ~PMB_V, addr);
+			writel_uncached(data_val & ~PMB_V, data);
+			continue;
+		}
 
-	back_to_cached();
+		/*
+		 * Update the caching attributes if necessary
+		 */
+		if (data_val & PMB_C) {
+			data_val &= ~PMB_CACHE_MASK;
+			data_val |= pmb_cache_flags();
 
-	return 0;
+			writel_uncached(data_val, data);
+		}
+
+		size = data_val & PMB_SZ_MASK;
+		flags = size | (data_val & PMB_CACHE_MASK);
+
+		pmbe = pmb_alloc(vpn, ppn, flags, i);
+		if (IS_ERR(pmbe)) {
+			WARN_ON_ONCE(1);
+			continue;
+		}
+
+		spin_lock_irqsave(&pmbe->lock, irqflags);
+
+		for (j = 0; j < ARRAY_SIZE(pmb_sizes); j++)
+			if (pmb_sizes[j].flag == size)
+				pmbe->size = pmb_sizes[j].size;
+
+		if (pmbp) {
+			spin_lock(&pmbp->lock);
+
+			/*
+			 * Compare the previous entry against the current one to
+			 * see if the entries span a contiguous mapping. If so,
+			 * setup the entry links accordingly. Compound mappings
+			 * are later coalesced.
+			 */
+			if (pmb_can_merge(pmbp, pmbe))
+				pmbp->link = pmbe;
+
+			spin_unlock(&pmbp->lock);
+		}
+
+		pmbp = pmbe;
+
+		spin_unlock_irqrestore(&pmbe->lock, irqflags);
+	}
 }
-#else
-int __uses_jump_to_uncached pmb_init(void)
+
+static void __init pmb_merge(struct pmb_entry *head)
 {
+	unsigned long span, newsize;
+	struct pmb_entry *tail;
+	int i = 1, depth = 0;
+
+	span = newsize = head->size;
+
+	tail = head->link;
+	while (tail) {
+		span += tail->size;
+
+		if (pmb_size_valid(span)) {
+			newsize = span;
+			depth = i;
+		}
+
+		/* This is the end of the line.. */
+		if (!tail->link)
+			break;
+
+		tail = tail->link;
+		i++;
+	}
+
+	/*
+	 * The merged page size must be valid.
+	 */
+	if (!depth || !pmb_size_valid(newsize))
+		return;
+
+	head->flags &= ~PMB_SZ_MASK;
+	head->flags |= pmb_size_to_flags(newsize);
+
+	head->size = newsize;
+
+	__pmb_unmap_entry(head->link, depth);
+	__set_pmb_entry(head);
+}
+
+static void __init pmb_coalesce(void)
+{
+	unsigned long flags;
 	int i;
-	unsigned long addr, data;
 
-	jump_to_uncached();
+	write_lock_irqsave(&pmb_rwlock, flags);
 
-	for (i = 0; i < PMB_ENTRY_MAX; i++) {
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
 		struct pmb_entry *pmbe;
-		unsigned long vpn, ppn, flags;
 
-		addr = PMB_DATA + (i << PMB_E_SHIFT);
-		data = ctrl_inl(addr);
-		if (!(data & PMB_V))
+		if (!test_bit(i, pmb_map))
 			continue;
 
-		if (data & PMB_C) {
-#if defined(CONFIG_CACHE_WRITETHROUGH)
-			data |= PMB_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
-			data &= ~PMB_WT;
-#else
-			data &= ~(PMB_C | PMB_WT);
-#endif
-		}
-		ctrl_outl(data, addr);
+		pmbe = &pmb_entry_list[i];
 
-		ppn = data & PMB_PFN_MASK;
+		/*
+		 * We're only interested in compound mappings
+		 */
+		if (!pmbe->link)
+			continue;
 
-		flags = data & (PMB_C | PMB_WT | PMB_UB);
-		flags |= data & PMB_SZ_MASK;
+		/*
+		 * Nothing to do if it already uses the largest possible
+		 * page size.
+		 */
+		if (pmbe->size == SZ_512M)
+			continue;
 
-		addr = PMB_ADDR + (i << PMB_E_SHIFT);
-		data = ctrl_inl(addr);
+		pmb_merge(pmbe);
+	}
 
-		vpn = data & PMB_PFN_MASK;
+	write_unlock_irqrestore(&pmb_rwlock, flags);
+}
 
-		pmbe = pmb_alloc(vpn, ppn, flags, i);
-		WARN_ON(IS_ERR(pmbe));
+#ifdef CONFIG_UNCACHED_MAPPING
+static void __init pmb_resize(void)
+{
+	int i;
+
+	/*
+	 * If the uncached mapping was constructed by the kernel, it will
+	 * already be a reasonable size.
+	 */
+	if (uncached_size == SZ_16M)
+		return;
+
+	read_lock(&pmb_rwlock);
+
+	for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+		struct pmb_entry *pmbe;
+		unsigned long flags;
+
+		if (!test_bit(i, pmb_map))
+			continue;
+
+		pmbe = &pmb_entry_list[i];
+
+		if (pmbe->vpn != uncached_start)
+			continue;
+
+		/*
+		 * Found it, now resize it.
+		 */
+		spin_lock_irqsave(&pmbe->lock, flags);
+
+		pmbe->size = SZ_16M;
+		pmbe->flags &= ~PMB_SZ_MASK;
+		pmbe->flags |= pmb_size_to_flags(pmbe->size);
+
+		uncached_resize(pmbe->size);
+
+		__set_pmb_entry(pmbe);
+
+		spin_unlock_irqrestore(&pmbe->lock, flags);
 	}
 
-	back_to_cached();
+	read_unlock(&pmb_rwlock);
+}
+#endif
+
+static int __init early_pmb(char *p)
+{
+	if (!p)
+		return 0;
+
+	if (strstr(p, "iomap"))
+		pmb_iomapping_enabled = 1;
 
 	return 0;
 }
-#endif /* CONFIG_PMB */
+early_param("pmb", early_pmb);
+
+void __init pmb_init(void)
+{
+	/* Synchronize software state */
+	pmb_synchronize();
+
+	/* Attempt to combine compound mappings */
+	pmb_coalesce();
+
+#ifdef CONFIG_UNCACHED_MAPPING
+	/* Resize initial mappings, if necessary */
+	pmb_resize();
+#endif
+
+	/* Log them */
+	pmb_notify();
+
+	writel_uncached(0, PMB_IRMCR);
+
+	/* Flush out the TLB */
+	local_flush_tlb_all();
+	ctrl_barrier();
+}
+
+bool __in_29bit_mode(void)
+{
+        return (__raw_readl(PMB_PASCR) & PASCR_SE) == 0;
+}
 
 static int pmb_seq_show(struct seq_file *file, void *iter)
 {
@@ -378,8 +827,8 @@ static int pmb_seq_show(struct seq_file *file, void *iter)
 		unsigned int size;
 		char *sz_str = NULL;
 
-		addr = ctrl_inl(mk_pmb_addr(i));
-		data = ctrl_inl(mk_pmb_data(i));
+		addr = __raw_readl(mk_pmb_addr(i));
+		data = __raw_readl(mk_pmb_data(i));
 
 		size = data & PMB_SZ_MASK;
 		sz_str = (size == PMB_SZ_16M)  ? " 16MB":
@@ -425,7 +874,7 @@ static int __init pmb_debugfs_init(void)
 
 	return 0;
 }
-postcore_initcall(pmb_debugfs_init);
+subsys_initcall(pmb_debugfs_init);
 
 #ifdef CONFIG_PM
 static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
@@ -437,14 +886,21 @@ static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 	if (state.event == PM_EVENT_ON &&
 	    prev_state.event == PM_EVENT_FREEZE) {
 		struct pmb_entry *pmbe;
+
+		read_lock(&pmb_rwlock);
+
 		for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
-			if (test_bit(i, &pmb_map)) {
+			if (test_bit(i, pmb_map)) {
 				pmbe = &pmb_entry_list[i];
 				set_pmb_entry(pmbe);
 			}
 		}
+
+		read_unlock(&pmb_rwlock);
 	}
+
 	prev_state = state;
+
 	return 0;
 }
 
@@ -462,6 +918,5 @@ static int __init pmb_sysdev_init(void)
 {
 	return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver);
 }
-
 subsys_initcall(pmb_sysdev_init);
 #endif
diff --git a/arch/sh/mm/tlb-debugfs.c b/arch/sh/mm/tlb-debugfs.c
new file mode 100644
index 0000000..229bf75
--- /dev/null
+++ b/arch/sh/mm/tlb-debugfs.c
@@ -0,0 +1,179 @@
+/*
+ * arch/sh/mm/tlb-debugfs.c
+ *
+ * debugfs ops for SH-4 ITLB/UTLBs.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+enum tlb_type {
+	TLB_TYPE_ITLB,
+	TLB_TYPE_UTLB,
+};
+
+static struct {
+	int bits;
+	const char *size;
+} tlb_sizes[] = {
+	{ 0x0, "  1KB" },
+	{ 0x1, "  4KB" },
+	{ 0x2, "  8KB" },
+	{ 0x4, " 64KB" },
+	{ 0x5, "256KB" },
+	{ 0x7, "  1MB" },
+	{ 0x8, "  4MB" },
+	{ 0xc, " 64MB" },
+};
+
+static int tlb_seq_show(struct seq_file *file, void *iter)
+{
+	unsigned int tlb_type = (unsigned int)file->private;
+	unsigned long addr1, addr2, data1, data2;
+	unsigned long flags;
+	unsigned long mmucr;
+	unsigned int nentries, entry;
+	unsigned int urb;
+
+	mmucr = __raw_readl(MMUCR);
+	if ((mmucr & 0x1) == 0) {
+		seq_printf(file, "address translation disabled\n");
+		return 0;
+	}
+
+	if (tlb_type == TLB_TYPE_ITLB) {
+		addr1 = MMU_ITLB_ADDRESS_ARRAY;
+		addr2 = MMU_ITLB_ADDRESS_ARRAY2;
+		data1 = MMU_ITLB_DATA_ARRAY;
+		data2 = MMU_ITLB_DATA_ARRAY2;
+		nentries = 4;
+	} else {
+		addr1 = MMU_UTLB_ADDRESS_ARRAY;
+		addr2 = MMU_UTLB_ADDRESS_ARRAY2;
+		data1 = MMU_UTLB_DATA_ARRAY;
+		data2 = MMU_UTLB_DATA_ARRAY2;
+		nentries = 64;
+	}
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	urb = (mmucr & MMUCR_URB) >> MMUCR_URB_SHIFT;
+
+	/* Make the "entry >= urb" test fail. */
+	if (urb == 0)
+		urb = MMUCR_URB_NENTRIES + 1;
+
+	if (tlb_type == TLB_TYPE_ITLB) {
+		addr1 = MMU_ITLB_ADDRESS_ARRAY;
+		addr2 = MMU_ITLB_ADDRESS_ARRAY2;
+		data1 = MMU_ITLB_DATA_ARRAY;
+		data2 = MMU_ITLB_DATA_ARRAY2;
+		nentries = 4;
+	} else {
+		addr1 = MMU_UTLB_ADDRESS_ARRAY;
+		addr2 = MMU_UTLB_ADDRESS_ARRAY2;
+		data1 = MMU_UTLB_DATA_ARRAY;
+		data2 = MMU_UTLB_DATA_ARRAY2;
+		nentries = 64;
+	}
+
+	seq_printf(file, "entry:     vpn        ppn     asid  size valid wired\n");
+
+	for (entry = 0; entry < nentries; entry++) {
+		unsigned long vpn, ppn, asid, size;
+		unsigned long valid;
+		unsigned long val;
+		const char *sz = "    ?";
+		int i;
+
+		val = __raw_readl(addr1 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		vpn = val & 0xfffffc00;
+		valid = val & 0x100;
+
+		val = __raw_readl(addr2 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		asid = val & MMU_CONTEXT_ASID_MASK;
+
+		val = __raw_readl(data1 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		ppn = (val & 0x0ffffc00) << 4;
+
+		val = __raw_readl(data2 | (entry << MMU_TLB_ENTRY_SHIFT));
+		ctrl_barrier();
+		size = (val & 0xf0) >> 4;
+
+		for (i = 0; i < ARRAY_SIZE(tlb_sizes); i++) {
+			if (tlb_sizes[i].bits == size)
+				break;
+		}
+
+		if (i != ARRAY_SIZE(tlb_sizes))
+			sz = tlb_sizes[i].size;
+
+		seq_printf(file, "%2d:    0x%08lx 0x%08lx %5lu %s   %s     %s\n",
+			   entry, vpn, ppn, asid,
+			   sz, valid ? "V" : "-",
+			   (urb <= entry) ? "W" : "-");
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int tlb_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, tlb_seq_show, inode->i_private);
+}
+
+static const struct file_operations tlb_debugfs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= tlb_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tlb_debugfs_init(void)
+{
+	struct dentry *itlb, *utlb;
+
+	itlb = debugfs_create_file("itlb", S_IRUSR, sh_debugfs_root,
+				   (unsigned int *)TLB_TYPE_ITLB,
+				   &tlb_debugfs_fops);
+	if (unlikely(!itlb))
+		return -ENOMEM;
+	if (IS_ERR(itlb))
+		return PTR_ERR(itlb);
+
+	utlb = debugfs_create_file("utlb", S_IRUSR, sh_debugfs_root,
+				   (unsigned int *)TLB_TYPE_UTLB,
+				   &tlb_debugfs_fops);
+	if (unlikely(!utlb)) {
+		debugfs_remove(itlb);
+		return -ENOMEM;
+	}
+
+	if (IS_ERR(utlb)) {
+		debugfs_remove(itlb);
+		return PTR_ERR(utlb);
+	}
+
+	return 0;
+}
+module_init(tlb_debugfs_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 409b7c2..b71db6a 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -68,11 +68,40 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
  * in extended mode, the legacy 8-bit ASID field in address array 1 has
  * undefined behaviour.
  */
-void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
-						 unsigned long page)
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
 	jump_to_uncached();
 	__raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
 	__raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+	__raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
 	back_to_cached();
 }
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index ace8e6d..7a940db 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -41,14 +41,14 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 
 	/* Set PTEH register */
 	vpn = (address & MMU_VPN_MASK) | get_asid();
-	ctrl_outl(vpn, MMU_PTEH);
+	__raw_writel(vpn, MMU_PTEH);
 
 	pteval = pte_val(pte);
 
 	/* Set PTEL register */
 	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
 	/* conveniently, we want all the software flags to be 0 anyway */
-	ctrl_outl(pteval, MMU_PTEL);
+	__raw_writel(pteval, MMU_PTEL);
 
 	/* Load the TLB */
 	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
@@ -75,5 +75,24 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	}
 
 	for (i = 0; i < ways; i++)
-		ctrl_outl(data, addr + (i << 8));
+		__raw_writel(data, addr + (i << 8));
+}
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+
+	/*
+	 * Flush all the TLB.
+	 *
+	 * Write to the MMU control register's bit:
+	 *	TF-bit for SH-3, TI-bit for SH-4.
+	 *      It's same position, bit #2.
+	 */
+	local_irq_save(flags);
+	status = __raw_readl(MMUCR);
+	status |= 0x04;
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+	local_irq_restore(flags);
 }
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 8cf550e..cfdf793 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -29,7 +29,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 
 	/* Set PTEH register */
 	vpn = (address & MMU_VPN_MASK) | get_asid();
-	ctrl_outl(vpn, MMU_PTEH);
+	__raw_writel(vpn, MMU_PTEH);
 
 	pteval = pte.pte_low;
 
@@ -41,13 +41,13 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	 * the protection bits (with the exception of the compat-mode SZ
 	 * and PR bits, which are cleared) being written out in PTEL.
 	 */
-	ctrl_outl(pte.pte_high, MMU_PTEA);
+	__raw_writel(pte.pte_high, MMU_PTEA);
 #else
 	if (cpu_data->flags & CPU_HAS_PTEA) {
 		/* The last 3 bits and the first one of pteval contains
 		 * the PTEA timing control and space attribute bits
 		 */
-		ctrl_outl(copy_ptea_attributes(pteval), MMU_PTEA);
+		__raw_writel(copy_ptea_attributes(pteval), MMU_PTEA);
 	}
 #endif
 
@@ -57,15 +57,14 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	pteval |= _PAGE_WT;
 #endif
 	/* conveniently, we want all the software flags to be 0 anyway */
-	ctrl_outl(pteval, MMU_PTEL);
+	__raw_writel(pteval, MMU_PTEL);
 
 	/* Load the TLB */
 	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
 	local_irq_restore(flags);
 }
 
-void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
-						 unsigned long page)
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
 	unsigned long addr, data;
 
@@ -78,6 +77,34 @@ void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
 	addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT;
 	data = page | asid; /* VALID bit is off */
 	jump_to_uncached();
-	ctrl_outl(data, addr);
+	__raw_writel(data, addr);
 	back_to_cached();
 }
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags, status;
+	int i;
+
+	/*
+	 * Flush all the TLB.
+	 */
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	status = __raw_readl(MMUCR);
+	status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+	if (status == 0)
+		status = MMUCR_URB_NENTRIES;
+
+	for (i = 0; i < status; i++)
+		__raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+	for (i = 0; i < 4; i++)
+		__raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+	back_to_cached();
+	ctrl_barrier();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index fdb64e4..f27dbe1 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -143,3 +143,42 @@ void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
  */
 void sh64_teardown_tlb_slot(unsigned long long config_addr)
 	__attribute__ ((alias("__flush_tlb_slot")));
+
+static int dtlb_entry;
+static unsigned long long dtlb_entries[64];
+
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long long entry;
+	unsigned long paddr, flags;
+
+	BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries));
+
+	local_irq_save(flags);
+
+	entry = sh64_get_wired_dtlb_entry();
+	dtlb_entries[dtlb_entry++] = entry;
+
+	paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK;
+	paddr &= ~PAGE_MASK;
+
+	sh64_setup_tlb_slot(entry, addr, get_asid(), paddr);
+
+	local_irq_restore(flags);
+}
+
+void tlb_unwire_entry(void)
+{
+	unsigned long long entry;
+	unsigned long flags;
+
+	BUG_ON(!dtlb_entry);
+
+	local_irq_save(flags);
+	entry = dtlb_entries[dtlb_entry--];
+
+	sh64_teardown_tlb_slot(entry);
+	sh64_put_wired_dtlb_entry(entry);
+
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-urb.c b/arch/sh/mm/tlb-urb.c
new file mode 100644
index 0000000..c92ce20
--- /dev/null
+++ b/arch/sh/mm/tlb-urb.c
@@ -0,0 +1,93 @@
+/*
+ * arch/sh/mm/tlb-urb.c
+ *
+ * TLB entry wiring helpers for URB-equipped parts.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+
+/*
+ * Load the entry for 'addr' into the TLB and wire the entry.
+ */
+void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URC;
+
+	/*
+	 * Make sure we're not trying to wire the last TLB entry slot.
+	 */
+	BUG_ON(!--urb);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	/*
+	 * Insert this entry into the highest non-wired TLB slot (via
+	 * the URC field).
+	 */
+	status |= (urb << MMUCR_URC_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	/* Load the entry into the TLB */
+	__update_tlb(vma, addr, pte);
+
+	/* ... and wire it up. */
+	status = __raw_readl(MMUCR);
+
+	status &= ~MMUCR_URB;
+	status |= (urb << MMUCR_URB_SHIFT);
+
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Unwire the last wired TLB entry.
+ *
+ * It should also be noted that it is not possible to wire and unwire
+ * TLB entries in an arbitrary order. If you wire TLB entry N, followed
+ * by entry N+1, you must unwire entry N+1 first, then entry N. In this
+ * respect, it works like a stack or LIFO queue.
+ */
+void tlb_unwire_entry(void)
+{
+	unsigned long status, flags;
+	int urb;
+
+	local_irq_save(flags);
+
+	status = __raw_readl(MMUCR);
+	urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
+	status &= ~MMUCR_URB;
+
+	/*
+	 * Make sure we're not trying to unwire a TLB entry when none
+	 * have been wired.
+	 */
+	BUG_ON(urb++ == MMUCR_URB_NENTRIES);
+
+	urb = urb % MMUCR_URB_NENTRIES;
+
+	status |= (urb << MMUCR_URB_SHIFT);
+	__raw_writel(status, MMUCR);
+	ctrl_barrier();
+
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlbflush_32.c b/arch/sh/mm/tlbflush_32.c
index 6f45c1f..3fbe03c 100644
--- a/arch/sh/mm/tlbflush_32.c
+++ b/arch/sh/mm/tlbflush_32.c
@@ -119,22 +119,3 @@ void local_flush_tlb_mm(struct mm_struct *mm)
 		local_irq_restore(flags);
 	}
 }
-
-void local_flush_tlb_all(void)
-{
-	unsigned long flags, status;
-
-	/*
-	 * Flush all the TLB.
-	 *
-	 * Write to the MMU control register's bit:
-	 *	TF-bit for SH-3, TI-bit for SH-4.
-	 *      It's same position, bit #2.
-	 */
-	local_irq_save(flags);
-	status = ctrl_inl(MMUCR);
-	status |= 0x04;
-	ctrl_outl(status, MMUCR);
-	ctrl_barrier();
-	local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index de0b0e88..03db41c 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -36,7 +36,7 @@ extern void die(const char *,struct pt_regs *,long);
 
 static inline void print_prots(pgprot_t prot)
 {
-	printk("prot is 0x%08lx\n",pgprot_val(prot));
+	printk("prot is 0x%016llx\n",pgprot_val(prot));
 
 	printk("%s %s %s %s %s\n",PPROT(_PAGE_SHARED),PPROT(_PAGE_READ),
 	       PPROT(_PAGE_EXECUTE),PPROT(_PAGE_WRITE),PPROT(_PAGE_USER));
@@ -189,7 +189,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -294,22 +293,11 @@ no_context:
  * us unable to handle the page fault gracefully.
  */
 out_of_memory:
-	if (is_global_init(current)) {
-		panic("INIT out of memory\n");
-		yield();
-		goto survive;
-	}
-	printk("fault:Out of memory\n");
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	printk("fault:Do sigbus\n");
diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c
new file mode 100644
index 0000000..8a4eca5
--- /dev/null
+++ b/arch/sh/mm/uncached.c
@@ -0,0 +1,43 @@
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/sizes.h>
+#include <asm/page.h>
+#include <asm/addrspace.h>
+
+/*
+ * This is the offset of the uncached section from its cached alias.
+ *
+ * Legacy platforms handle trivial transitions between cached and
+ * uncached segments by making use of the 1:1 mapping relationship in
+ * 512MB lowmem, others via a special uncached mapping.
+ *
+ * Default value only valid in 29 bit mode, in 32bit mode this will be
+ * updated by the early PMB initialization code.
+ */
+unsigned long cached_to_uncached = SZ_512M;
+unsigned long uncached_size = SZ_512M;
+unsigned long uncached_start, uncached_end;
+EXPORT_SYMBOL(uncached_start);
+EXPORT_SYMBOL(uncached_end);
+
+int virt_addr_uncached(unsigned long kaddr)
+{
+	return (kaddr >= uncached_start) && (kaddr < uncached_end);
+}
+EXPORT_SYMBOL(virt_addr_uncached);
+
+void __init uncached_init(void)
+{
+#ifdef CONFIG_29BIT
+	uncached_start = P2SEG;
+#else
+	uncached_start = memory_end;
+#endif
+	uncached_end = uncached_start + uncached_size;
+}
+
+void __init uncached_resize(unsigned long size)
+{
+	uncached_size = size;
+	uncached_end = uncached_start + uncached_size;
+}
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 6639b25..b25aa55 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -32,6 +32,7 @@ DREAMCAST		SH_DREAMCAST
 SNAPGEAR		SH_SECUREEDGE5410
 EDOSK7705		SH_EDOSK7705
 EDOSK7760		SH_EDOSK7760
+SDK7786			SH_SDK7786
 SH4202_MICRODEV		SH_SH4202_MICRODEV
 SH03			SH_SH03
 LANDISK			SH_LANDISK
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4097f6a..c0015db 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -37,9 +37,12 @@ config SPARC64
 	def_bool 64BIT
 	select ARCH_SUPPORTS_MSI
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FP_TEST
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -72,7 +75,7 @@ config ARCH_USES_GETTIMEOFFSET
 
 config GENERIC_CMOS_UPDATE
 	bool
-	default y if SPARC64
+	default y
 
 config GENERIC_CLOCKEVENTS
 	bool
@@ -127,6 +130,12 @@ config ZONE_DMA
 	bool
 	default y if SPARC32
 
+config NEED_DMA_MAP_STATE
+	def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y if SPARC32
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 9d3c889..1b4a831 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -19,13 +19,10 @@ config DEBUG_DCFLUSH
 	bool "D-cache flush debugging"
 	depends on SPARC64 && DEBUG_KERNEL
 
-config STACK_DEBUG
-	bool "Stack Overflow Detection Support"
-
 config MCOUNT
 	bool
 	depends on SPARC64
-	depends on STACK_DEBUG || FUNCTION_TRACER
+	depends on FUNCTION_TRACER
 	default y
 
 config FRAME_POINTER
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 99a1f19..6a8d078 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan 11 23:20:31 2010
+# Linux kernel version: 2.6.33
+# Wed Mar  3 02:52:23 2010
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -9,6 +9,8 @@ CONFIG_SPARC32=y
 # CONFIG_SPARC64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc32_defconfig"
 CONFIG_BITS=32
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_MMU=y
 CONFIG_HIGHMEM=y
@@ -48,11 +50,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -68,6 +65,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -211,7 +209,6 @@ CONFIG_SBUSCHAR=y
 CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -232,7 +229,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -379,11 +375,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
 # EEPROM support
 #
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
@@ -507,7 +505,9 @@ CONFIG_SUNQE=m
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_GRETH is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -521,6 +521,7 @@ CONFIG_SUNQE=m
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
@@ -563,6 +564,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -665,6 +667,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SUNCORE=y
 CONFIG_SERIAL_SUNZILOG=y
 CONFIG_SERIAL_SUNZILOG_CONSOLE=y
@@ -689,7 +692,23 @@ CONFIG_HW_RANDOM=m
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_XILINX_PLTFM=m
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 
 #
 # PPS support
@@ -706,10 +725,13 @@ CONFIG_HWMON=y
 #
 # Native drivers
 #
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -720,6 +742,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -736,6 +759,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -743,6 +768,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -808,6 +834,14 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1180,9 +1214,11 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 41c5a56..1dc07a0 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan 20 16:31:47 2010
+# Linux kernel version: 2.6.34
+# Wed May 26 21:14:01 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -23,6 +23,7 @@ CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
 CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -55,14 +56,10 @@ CONFIG_TREE_RCU=y
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=64
 # CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
@@ -77,6 +74,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -105,15 +103,13 @@ CONFIG_PERF_USE_VMALLOC=y
 # Kernel Performance Events And Counters
 #
 CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 CONFIG_PERF_COUNTERS=y
 # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
@@ -242,6 +238,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
 CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -266,7 +263,6 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -290,7 +286,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
@@ -356,6 +351,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
@@ -372,6 +368,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
+CONFIG_RPS=y
 
 #
 # Network testing
@@ -391,9 +388,14 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
+
+#
+# Some wireless drivers require a rate control algorithm
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 
 #
 # Device Drivers
@@ -425,10 +427,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 # CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
@@ -449,6 +447,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
@@ -521,6 +520,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -665,6 +665,7 @@ CONFIG_PHYLIB=m
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
@@ -677,6 +678,7 @@ CONFIG_SUNGEM=m
 CONFIG_SUNVNET=m
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_ETHOC is not set
+# CONFIG_GRETH is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -691,6 +693,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_E100 is not set
@@ -739,8 +742,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_VXGE is not set
@@ -751,6 +757,7 @@ CONFIG_NIU=m
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
@@ -769,6 +776,7 @@ CONFIG_NIU=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -781,7 +789,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
@@ -819,6 +826,7 @@ CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
@@ -843,6 +851,7 @@ CONFIG_MOUSE_SERIAL=y
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -851,6 +860,7 @@ CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -874,6 +884,7 @@ CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
 # CONFIG_NOZOMI is not set
 
 #
@@ -894,7 +905,10 @@ CONFIG_SERIAL_SUNHV=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -941,6 +955,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -954,15 +969,9 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -988,10 +997,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1028,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1057,18 +1068,21 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1076,6 +1090,7 @@ CONFIG_SSB_POSSIBLE=y
 # Graphics support
 #
 CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1117,6 +1132,7 @@ CONFIG_FB_FFB=y
 # CONFIG_FB_LEO is not set
 CONFIG_FB_XVR500=y
 CONFIG_FB_XVR2500=y
+CONFIG_FB_XVR1000=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
@@ -1279,6 +1295,7 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_YMFPCI is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SPARC=y
 # CONFIG_SND_SUN_AMD7930 is not set
@@ -1301,14 +1318,18 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
 CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EGALAX is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
@@ -1317,14 +1338,21 @@ CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
@@ -1335,6 +1363,7 @@ CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1349,7 +1378,6 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
@@ -1427,7 +1455,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1440,7 +1467,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1516,10 +1542,6 @@ CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -1607,6 +1629,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1621,6 +1644,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1699,8 +1723,8 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1735,6 +1759,9 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -1762,12 +1789,12 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
@@ -1807,6 +1834,7 @@ CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
@@ -1887,6 +1915,7 @@ CONFIG_CRYPTO_DEFLATE=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_NIAGARA2 is not set
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
@@ -1904,9 +1933,11 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index f0d343c..7ae128b 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -25,7 +25,7 @@ extern int atomic_cmpxchg(atomic_t *, int, int);
 extern int atomic_add_unless(atomic_t *, int, int);
 extern void atomic_set(atomic_t *, int);
 
-#define atomic_read(v)          ((v)->counter)
+#define atomic_read(v)          (*(volatile int *)&(v)->counter)
 
 #define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
 #define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index f2e4800..2050ca0 100644
--- a/arch/sparc/include/asm/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -13,8 +13,8 @@
 #define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v, i)	(((v)->counter) = i)
 #define atomic64_set(v, i)	(((v)->counter) = i)
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
index e72ac9c..766121a 100644
--- a/arch/sparc/include/asm/bitops_64.h
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -44,7 +44,7 @@ extern void change_bit(unsigned long nr, volatile unsigned long *addr);
 
 #ifdef ULTRA_HAS_POPULATION_COUNT
 
-static inline unsigned int hweight64(unsigned long w)
+static inline unsigned int __arch_hweight64(unsigned long w)
 {
 	unsigned int res;
 
@@ -52,7 +52,7 @@ static inline unsigned int hweight64(unsigned long w)
 	return res;
 }
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	unsigned int res;
 
@@ -60,7 +60,7 @@ static inline unsigned int hweight32(unsigned int w)
 	return res;
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
 	unsigned int res;
 
@@ -68,7 +68,7 @@ static inline unsigned int hweight16(unsigned int w)
 	return res;
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
 	unsigned int res;
 
@@ -78,9 +78,10 @@ static inline unsigned int hweight8(unsigned int w)
 
 #else
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
 
 #endif
+#include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
 #endif /* __KERNEL__ */
 
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
index 2909f0a..69358b5 100644
--- a/arch/sparc/include/asm/cache.h
+++ b/arch/sparc/include/asm/cache.h
@@ -7,9 +7,10 @@
 #ifndef _SPARC_CACHE_H
 #define _SPARC_CACHE_H
 
+#define ARCH_SLAB_MINALIGN	__alignof__(unsigned long long)
+
 #define L1_CACHE_SHIFT 5
 #define L1_CACHE_BYTES 32
-#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
 
 #ifdef CONFIG_SPARC32
 #define SMP_CACHE_BYTES_SHIFT 5
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 0e70625..5016f76 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -5,7 +5,8 @@
  */
 #include <linux/types.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"sparc\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index 926397d..050ef35 100644
--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -17,7 +17,7 @@ typedef struct {
 	unsigned int	__nmi_count;
 	unsigned long	clock_tick;	/* %tick's per second */
 	unsigned long	__pad;
-	unsigned int	__pad1;
+	unsigned int	irq0_irqs;
 	unsigned int	__pad2;
 
 	/* Dcache line 2, rarely used */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
index f3b85b6..d4c4521 100644
--- a/arch/sparc/include/asm/device.h
+++ b/arch/sparc/include/asm/device.h
@@ -13,25 +13,10 @@ struct dev_archdata {
 	void			*iommu;
 	void			*stc;
 	void			*host_controller;
-
-	struct device_node	*prom_node;
 	struct of_device	*op;
-
 	int			numa_node;
 };
 
-static inline void dev_archdata_set_node(struct dev_archdata *ad,
-					 struct device_node *np)
-{
-	ad->prom_node = np;
-}
-
-static inline struct device_node *
-dev_archdata_get_node(const struct dev_archdata *ad)
-{
-	return ad->prom_node;
-}
-
 struct pdev_archdata {
 };
 
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 5a8c308..4b4a0c0 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -8,7 +8,6 @@
 #define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 
 extern int dma_supported(struct device *dev, u64 mask);
-extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
@@ -62,4 +61,17 @@ static inline int dma_get_cache_alignment(void)
 	return (1 << INTERNODE_CACHE_SHIFT);
 }
 
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type) {
+		if (!dev->dma_mask || !dma_supported(dev, mask))
+			return -EINVAL;
+		*dev->dma_mask = mask;
+		return 0;
+	}
+#endif
+	return -EINVAL;
+}
+
 #endif
diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h
index b83e447..e834880 100644
--- a/arch/sparc/include/asm/fb.h
+++ b/arch/sparc/include/asm/fb.h
@@ -18,7 +18,7 @@ static inline int fb_is_primary_device(struct fb_info *info)
 	struct device *dev = info->device;
 	struct device_node *node;
 
-	node = dev->archdata.prom_node;
+	node = dev->of_node;
 	if (node &&
 	    node == of_console_device)
 		return 1;
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
index b9215a0..0a21da8 100644
--- a/arch/sparc/include/asm/fbio.h
+++ b/arch/sparc/include/asm/fbio.h
@@ -173,7 +173,7 @@ struct mdi_cfginfo {
 	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
         int     mdi_type;       /* FBTYPE name */
         int     mdi_height;     /* height */
-        int     mdi_width;      /* widht */
+        int     mdi_width;      /* width */
         int     mdi_size;       /* available ram */
         int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
         int     mdi_pixfreq;    /* pixel clock (from PROM) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index 36439d6..8fac3ab 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -589,7 +589,7 @@ static unsigned long __init sun_floppy_init(void)
 		if (!op)
 			return 0;
 
-		state_prop = of_get_property(op->node, "status", NULL);
+		state_prop = of_get_property(op->dev.of_node, "status", NULL);
 		if (state_prop && !strncmp(state_prop, "disabled", 8))
 			return 0;
 
@@ -716,7 +716,7 @@ static unsigned long __init sun_floppy_init(void)
 
 		return sun_floppy_types[0];
 	}
-	prop = of_get_property(op->node, "status", NULL);
+	prop = of_get_property(op->dev.of_node, "status", NULL);
 	if (prop && !strncmp(state, "disabled", 8))
 		return 0;
 
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 679c750..2889574 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -249,10 +249,14 @@ extern void iounmap(volatile void __iomem *addr);
 
 #define ioread8(X)			readb(X)
 #define ioread16(X)			readw(X)
+#define ioread16be(X)			__raw_readw(X)
 #define ioread32(X)			readl(X)
+#define ioread32be(X)			__raw_readl(X)
 #define iowrite8(val,X)			writeb(val,X)
 #define iowrite16(val,X)		writew(val,X)
+#define iowrite16be(val,X)		__raw_writew(val,X)
 #define iowrite32(val,X)		writel(val,X)
+#define iowrite32be(val,X)		__raw_writel(val,X)
 
 static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
 {
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
index 4aee21d..9517d06 100644
--- a/arch/sparc/include/asm/io_64.h
+++ b/arch/sparc/include/asm/io_64.h
@@ -468,10 +468,14 @@ static inline void iounmap(volatile void __iomem *addr)
 
 #define ioread8(X)			readb(X)
 #define ioread16(X)			readw(X)
+#define ioread16be(X)			__raw_readw(X)
 #define ioread32(X)			readl(X)
+#define ioread32be(X)			__raw_readl(X)
 #define iowrite8(val,X)			writeb(val,X)
 #define iowrite16(val,X)		writew(val,X)
+#define iowrite16be(val,X)		__raw_writew(val,X)
 #define iowrite32(val,X)		writel(val,X)
+#define iowrite32be(val,X)		__raw_writel(val,X)
 
 /* Create a virtual mapping cookie for an IO port range */
 extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
index 8b49bf9..bfa1ea4 100644
--- a/arch/sparc/include/asm/irqflags_64.h
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -76,9 +76,26 @@ static inline int raw_irqs_disabled(void)
  */
 static inline unsigned long __raw_local_irq_save(void)
 {
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
+	unsigned long flags, tmp;
+
+	/* Disable interrupts to PIL_NORMAL_MAX unless we already
+	 * are using PIL_NMI, in which case PIL_NMI is retained.
+	 *
+	 * The only values we ever program into the %pil are 0,
+	 * PIL_NORMAL_MAX and PIL_NMI.
+	 *
+	 * Since PIL_NMI is the largest %pil value and all bits are
+	 * set in it (0xf), it doesn't matter what PIL_NORMAL_MAX
+	 * actually is.
+	 */
+	__asm__ __volatile__(
+		"rdpr	%%pil, %0\n\t"
+		"or	%0, %2, %1\n\t"
+		"wrpr	%1, 0x0, %%pil"
+		: "=r" (flags), "=r" (tmp)
+		: "i" (PIL_NORMAL_MAX)
+		: "memory"
+	);
 
 	return flags;
 }
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
deleted file mode 100644
index 6a352cb..0000000
--- a/arch/sparc/include/asm/lmb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SPARC64_LMB_H
-#define _SPARC64_LMB_H
-
-#include <asm/oplib.h>
-
-#define LMB_DBG(fmt...) prom_printf(fmt)
-
-#define LMB_REAL_LIMIT	0
-
-#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/memblock.h b/arch/sparc/include/asm/memblock.h
new file mode 100644
index 0000000..f12af88
--- /dev/null
+++ b/arch/sparc/include/asm/memblock.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_MEMBLOCK_H
+#define _SPARC64_MEMBLOCK_H
+
+#include <asm/oplib.h>
+
+#define MEMBLOCK_DBG(fmt...) prom_printf(fmt)
+
+#define MEMBLOCK_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_MEMBLOCK_H) */
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
index a5d9811..f320246 100644
--- a/arch/sparc/include/asm/of_device.h
+++ b/arch/sparc/include/asm/of_device.h
@@ -14,7 +14,6 @@
  */
 struct of_device
 {
-	struct device_node		*node;
 	struct device			dev;
 	struct resource			resource[PROMREG_MAX];
 	unsigned int			irqs[PROMINTR_MAX];
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index ff9ead6..c333b8d 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -113,7 +113,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id
 	struct parport *p;
 	int slot, err;
 
-	parent = op->node->parent;
+	parent = op->dev.of_node->parent;
 	if (!strcmp(parent->name, "dma")) {
 		p = parport_pc_probe_port(base, base + 0x400,
 					  op->irqs[0], PARPORT_DMA_NOFIFO,
@@ -232,8 +232,11 @@ static const struct of_device_id ecpp_match[] = {
 };
 
 static struct of_platform_driver ecpp_driver = {
-	.name			= "ecpp",
-	.match_table		= ecpp_match,
+	.driver = {
+		.name = "ecpp",
+		.owner = THIS_MODULE,
+		.of_match_table = ecpp_match,
+	},
 	.probe			= ecpp_probe,
 	.remove			= __devexit_p(ecpp_remove),
 };
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index e769f66..332ac9a 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -32,20 +32,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 
 struct pci_dev;
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index b0576df..5312782 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -32,20 +32,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-/* pci_unmap_{single,page} is not a nop, thus... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
-	dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
-	__u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)			\
-	((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
-	(((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)			\
-	((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
-	(((PTR)->LEN_NAME) = (VAL))
-
 /* PCI IOMMU mapping bypass support. */
 
 /* PCI 64-bit addressing works for all slots on all controller
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
index 8368730..8d8720a 100644
--- a/arch/sparc/include/asm/perfctr.h
+++ b/arch/sparc/include/asm/perfctr.h
@@ -10,8 +10,8 @@
  * from enumeration below.  The meaning of further arguments
  * are determined by the operation code.
  *
- * int sys_perfctr(int opcode, unsigned long arg0,
- *                 unsigned long arg1, unsigned long arg2)
+ * NOTE: This system call is no longer provided, use the perf_events
+ *       infrastructure.
  *
  * Pointers which are passed by the user are pointers to 64-bit
  * integers.
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index e0cabe7..0ece77f 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -142,13 +142,12 @@ BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
 #define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
 #define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
 
-BTFIXUPDEF_SETHI(none_mask)
 BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
 BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
 
 static inline int pte_none(pte_t pte)
 {
-	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+	return !pte_val(pte);
 }
 
 #define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
@@ -160,7 +159,7 @@ BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
 
 static inline int pmd_none(pmd_t pmd)
 {
-	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+	return !pmd_val(pmd);
 }
 
 #define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
@@ -330,9 +329,9 @@ BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
 #define FAULT_CODE_WRITE    0x2
 #define FAULT_CODE_USER     0x4
 
-BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t *)
 
-#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+#define update_mmu_cache(vma,addr,ptep) BTFIXUP_CALL(update_mmu_cache)(vma,addr,ptep)
 
 BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
     unsigned long, unsigned int)
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index f3cb790..f5b5fa7 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -706,7 +706,7 @@ extern unsigned long find_ecache_flush_span(unsigned long size);
 #define mmu_unlockarea(vaddr, len)		do { } while(0)
 
 struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
 
 /* Encode and de-code a swap entry */
 #define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
index e580f55..433e45f 100644
--- a/arch/sparc/include/asm/scatterlist.h
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -1,27 +1,9 @@
 #ifndef _SPARC_SCATTERLIST_H
 #define _SPARC_SCATTERLIST_H
 
-#include <asm/page.h>
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-
-	unsigned int	length;
-
-	dma_addr_t	dma_address;
-	__u32		dma_length;
-};
-
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)     	((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD	(~0UL)
-
 #define ARCH_HAS_SG_CHAIN
 
 #endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
index 55db5ec..a232e9e 100644
--- a/arch/sparc/include/asm/stat.h
+++ b/arch/sparc/include/asm/stat.h
@@ -53,8 +53,8 @@ struct stat {
 	ino_t		st_ino;
 	mode_t		st_mode;
 	short		st_nlink;
-	uid_t		st_uid;
-	gid_t		st_gid;
+	unsigned short	st_uid;
+	unsigned short	st_gid;
 	unsigned short	st_rdev;
 	off_t		st_size;
 	time_t		st_atime;
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
index 7486c60..025a02a 100644
--- a/arch/sparc/include/asm/syscall.h
+++ b/arch/sparc/include/asm/syscall.h
@@ -5,6 +5,13 @@
 #include <linux/sched.h>
 #include <asm/ptrace.h>
 
+/*
+ * The syscall table always contains 32 bit pointers since we know that the
+ * address of the function to be called is (way) below 4GB.  So the "int"
+ * type here is what we want [need] for both 32 bit and 64 bit systems.
+ */
+extern const unsigned int sys_call_table[];
+
 /* The system call number is given by the user in %g1 */
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index d47a98e..d24cfe1 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -143,15 +143,7 @@ do {						\
 	 * and 2 stores in this critical code path.  -DaveM
 	 */
 #define switch_to(prev, next, last)					\
-do {	if (test_thread_flag(TIF_PERFCTR)) {				\
-		unsigned long __tmp;					\
-		read_pcr(__tmp);					\
-		current_thread_info()->pcr_reg = __tmp;			\
-		read_pic(__tmp);					\
-		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
-		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
-	}								\
-	flush_tlb_pending();						\
+do {	flush_tlb_pending();						\
 	save_and_clear_fpu();						\
 	/* If you are tempted to conditionalize the following */	\
 	/* so that ASI is only written if it changes, think again. */	\
@@ -197,11 +189,6 @@ do {	if (test_thread_flag(TIF_PERFCTR)) {				\
 	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
 	  "i0", "i1", "i2", "i3", "i4", "i5",				\
 	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
-	/* If you fuck with this, update ret_from_syscall code too. */	\
-	if (test_thread_flag(TIF_PERFCTR)) {				\
-		write_pcr(current_thread_info()->pcr_reg);		\
-		reset_pic();						\
-	}								\
 } while(0)
 
 static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 844d73a..9dd0318 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -132,7 +132,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
 					 * this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
 					 * TIF_NEED_RESCHED */
-#define TIF_MEMDIE		10
+#define TIF_MEMDIE		10	/* is terminating due to OOM killer */
 #define TIF_FREEZE		11	/* is freezing for suspend */
 
 /* as above, but as bit values */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 39be9f2..fb2ea77 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -58,11 +58,6 @@ struct thread_info {
 	unsigned long		gsr[7];
 	unsigned long		xfsr[7];
 
-	__u64			__user *user_cntd0;
-	__u64			__user *user_cntd1;
-	__u64			kernel_cntd0, kernel_cntd1;
-	__u64			pcr_reg;
-
 	struct restart_block	restart_block;
 
 	struct pt_regs		*kern_una_regs;
@@ -96,15 +91,10 @@ struct thread_info {
 #define TI_RWIN_SPTRS	0x000003c8
 #define TI_GSR		0x00000400
 #define TI_XFSR		0x00000438
-#define TI_USER_CNTD0	0x00000470
-#define TI_USER_CNTD1	0x00000478
-#define TI_KERN_CNTD0	0x00000480
-#define TI_KERN_CNTD1	0x00000488
-#define TI_PCR		0x00000490
-#define TI_RESTART_BLOCK 0x00000498
-#define TI_KUNA_REGS	0x000004c8
-#define TI_KUNA_INSN	0x000004d0
-#define TI_FPREGS	0x00000500
+#define TI_RESTART_BLOCK 0x00000470
+#define TI_KUNA_REGS	0x000004a0
+#define TI_KUNA_INSN	0x000004a8
+#define TI_FPREGS	0x000004c0
 
 /* We embed this in the uppermost byte of thread_info->flags */
 #define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
@@ -121,7 +111,7 @@ struct thread_info {
 #define THREAD_SHIFT PAGE_SHIFT
 #endif /* PAGE_SHIFT == 13 */
 
-#define PREEMPT_ACTIVE		0x4000000
+#define PREEMPT_ACTIVE		0x10000000
 
 /*
  * macros/functions for gaining access to the thread information structure
@@ -199,7 +189,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
  *
  * On trap return we need to test several values:
  *
- * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
+ * user:	need_resched, notify_resume, sigpending, wsaved
  * kernel:	fpdepth
  *
  * So to check for work in the kernel case we simply load the fpdepth
@@ -220,7 +210,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_PERFCTR		4	/* performance counters active */
+/* flag bit 4 is available */
 #define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
 /* flag bit 6 is available */
 #define TIF_32BIT		7	/* 32-bit binary */
@@ -233,7 +223,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
  *       an immediate value in instructions such as andcc.
  */
 /* flag bit 12 is available */
-#define TIF_MEMDIE		13
+#define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	14
 #define TIF_FREEZE		15	/* is freezing for suspend */
 
@@ -241,7 +231,6 @@ register struct thread_info *current_thread_info_reg asm("g6");
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
 #define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
 #define _TIF_32BIT		(1<<TIF_32BIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
@@ -252,7 +241,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
 
 #define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
 				 _TIF_DO_NOTIFY_RESUME_MASK | \
-				 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+				 _TIF_NEED_RESCHED)
 #define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
 
 /*
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index cb4b9bf..d0b3b01 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -432,7 +432,9 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#ifndef __32bit_syscall_numbers__
+#ifdef __32bit_syscall_numbers__
+#define __ARCH_WANT_SYS_IPC
+#else
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
 #endif
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index c631614..0c2dc1f 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -13,6 +13,14 @@ extra-y     += init_task.o
 CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
 extra-y              += vmlinux.lds
 
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o := -pg
+CFLAGS_REMOVE_time_$(BITS).o := -pg
+CFLAGS_REMOVE_perf_event.o := -pg
+CFLAGS_REMOVE_pcr.o := -pg
+endif
+
 obj-$(CONFIG_SPARC32)   += entry.o wof.o wuf.o
 obj-$(CONFIG_SPARC32)   += etrap_32.o
 obj-$(CONFIG_SPARC32)   += rtrap_32.o
@@ -85,7 +93,7 @@ obj-$(CONFIG_KGDB)        += kgdb_$(BITS).o
 
 
 obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-CFLAGS_REMOVE_ftrace.o := -pg
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 
 obj-$(CONFIG_EARLYFB) += btext.o
 obj-$(CONFIG_STACKTRACE)     += stacktrace.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 71ec90b..b27476c 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -174,8 +174,11 @@ static struct of_device_id __initdata apc_match[] = {
 MODULE_DEVICE_TABLE(of, apc_match);
 
 static struct of_platform_driver apc_driver = {
-	.name		= "apc",
-	.match_table	= apc_match,
+	.driver = {
+		.name = "apc",
+		.owner = THIS_MODULE,
+		.of_match_table = apc_match,
+	},
 	.probe		= apc_probe,
 };
 
diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index 9f52db2..ddc8412 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -104,7 +104,7 @@ MODULE_DEVICE_TABLE(of, auxio_match);
 
 static int __devinit auxio_probe(struct of_device *dev, const struct of_device_id *match)
 {
-	struct device_node *dp = dev->node;
+	struct device_node *dp = dev->dev.of_node;
 	unsigned long size;
 
 	if (!strcmp(dp->parent->name, "ebus")) {
@@ -132,10 +132,11 @@ static int __devinit auxio_probe(struct of_device *dev, const struct of_device_i
 }
 
 static struct of_platform_driver auxio_driver = {
-	.match_table	= auxio_match,
 	.probe		= auxio_probe,
-	.driver		= {
-		.name	= "auxio",
+	.driver = {
+		.name = "auxio",
+		.owner = THIS_MODULE,
+		.of_match_table = auxio_match,
 	},
 };
 
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 4589ca3..434335f 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -5,6 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/of_device.h>
@@ -148,10 +149,11 @@ static struct of_device_id __initdata clock_board_match[] = {
 };
 
 static struct of_platform_driver clock_board_driver = {
-	.match_table	= clock_board_match,
 	.probe		= clock_board_probe,
-	.driver		= {
-		.name	= "clock_board",
+	.driver = {
+		.name = "clock_board",
+		.owner = THIS_MODULE,
+		.of_match_table = clock_board_match,
 	},
 };
 
@@ -167,7 +169,7 @@ static int __devinit fhc_probe(struct of_device *op,
 		goto out;
 	}
 
-	if (!strcmp(op->node->parent->name, "central"))
+	if (!strcmp(op->dev.of_node->parent->name, "central"))
 		p->central = true;
 
 	p->pregs = of_ioremap(&op->resource[0], 0,
@@ -182,7 +184,7 @@ static int __devinit fhc_probe(struct of_device *op,
 		reg = upa_readl(p->pregs + FHC_PREGS_BSR);
 		p->board_num = ((reg >> 16) & 1) | ((reg >> 12) & 0x0e);
 	} else {
-		p->board_num = of_getintprop_default(op->node, "board#", -1);
+		p->board_num = of_getintprop_default(op->dev.of_node, "board#", -1);
 		if (p->board_num == -1) {
 			printk(KERN_ERR "fhc: No board# property\n");
 			goto out_unmap_pregs;
@@ -253,10 +255,11 @@ static struct of_device_id __initdata fhc_match[] = {
 };
 
 static struct of_platform_driver fhc_driver = {
-	.match_table	= fhc_match,
 	.probe		= fhc_probe,
-	.driver		= {
-		.name	= "fhc",
+	.driver = {
+		.name = "fhc",
+		.owner = THIS_MODULE,
+		.of_match_table = fhc_match,
 	},
 };
 
diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c
index e1a9598..870cb65 100644
--- a/arch/sparc/kernel/chmc.c
+++ b/arch/sparc/kernel/chmc.c
@@ -425,7 +425,7 @@ static int __devinit jbusmc_probe(struct of_device *op,
 	INIT_LIST_HEAD(&p->list);
 
 	err = -ENODEV;
-	prop = of_get_property(op->node, "portid", &len);
+	prop = of_get_property(op->dev.of_node, "portid", &len);
 	if (!prop || len != 4) {
 		printk(KERN_ERR PFX "Cannot find portid.\n");
 		goto out_free;
@@ -433,7 +433,7 @@ static int __devinit jbusmc_probe(struct of_device *op,
 
 	p->portid = *prop;
 
-	prop = of_get_property(op->node, "memory-control-register-1", &len);
+	prop = of_get_property(op->dev.of_node, "memory-control-register-1", &len);
 	if (!prop || len != 8) {
 		printk(KERN_ERR PFX "Cannot get memory control register 1.\n");
 		goto out_free;
@@ -449,7 +449,7 @@ static int __devinit jbusmc_probe(struct of_device *op,
 	}
 
 	err = -ENODEV;
-	ml = of_get_property(op->node, "memory-layout", &p->layout_len);
+	ml = of_get_property(op->dev.of_node, "memory-layout", &p->layout_len);
 	if (!ml) {
 		printk(KERN_ERR PFX "Cannot get memory layout property.\n");
 		goto out_iounmap;
@@ -466,7 +466,7 @@ static int __devinit jbusmc_probe(struct of_device *op,
 	mc_list_add(&p->list);
 
 	printk(KERN_INFO PFX "UltraSPARC-IIIi memory controller at %s\n",
-	       op->node->full_name);
+	       op->dev.of_node->full_name);
 
 	dev_set_drvdata(&op->dev, p);
 
@@ -693,7 +693,7 @@ static void chmc_fetch_decode_regs(struct chmc *p)
 static int __devinit chmc_probe(struct of_device *op,
 				const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	unsigned long ver;
 	const void *pval;
 	int len, portid;
@@ -811,8 +811,11 @@ static const struct of_device_id us3mc_match[] = {
 MODULE_DEVICE_TABLE(of, us3mc_match);
 
 static struct of_platform_driver us3mc_driver = {
-	.name		= "us3mc",
-	.match_table	= us3mc_match,
+	.driver = {
+		.name = "us3mc",
+		.owner = THIS_MODULE,
+		.of_match_table = us3mc_match,
+	},
 	.probe		= us3mc_probe,
 	.remove		= __devexit_p(us3mc_remove),
 };
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index 7430ed0..8de64c8 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cpumask.h>
diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c
index b171ae8..62dc7a0 100644
--- a/arch/sparc/kernel/devices.c
+++ b/arch/sparc/kernel/devices.c
@@ -59,7 +59,7 @@ static int __cpu_find_by(int (*compare)(int, int, void *), void *compare_arg,
 
 	cur_inst = 0;
 	for_each_node_by_type(dp, "cpu") {
-		int err = check_cpu_node(dp->node, &cur_inst,
+		int err = check_cpu_node(dp->phandle, &cur_inst,
 					 compare, compare_arg,
 					 prom_node, mid);
 		if (!err) {
@@ -143,6 +143,4 @@ void __init device_scan(void)
 
 	if (ARCH_SUN4C)
 		sun4c_probe_memerr_reg();
-
-	return;
 }
diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h
index 4f53a23..c011b93 100644
--- a/arch/sparc/kernel/entry.h
+++ b/arch/sparc/kernel/entry.h
@@ -48,7 +48,6 @@ extern void __init boot_cpu_id_too_large(int cpu);
 extern unsigned int dcache_parity_tl1_occurred;
 extern unsigned int icache_parity_tl1_occurred;
 
-extern asmlinkage void update_perfctrs(void);
 extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
 extern void timer_interrupt(int irq, struct pt_regs *regs);
 
diff --git a/arch/sparc/kernel/ftrace.c b/arch/sparc/kernel/ftrace.c
index 29973da..03ab022 100644
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@@ -13,7 +13,7 @@ static const u32 ftrace_nop = 0x01000000;
 
 static u32 ftrace_call_replace(unsigned long ip, unsigned long addr)
 {
-	static u32 call;
+	u32 call;
 	s32 off;
 
 	off = ((s32)addr - (s32)ip);
@@ -92,13 +92,60 @@ int __init ftrace_dyn_arch_init(void *data)
 }
 #endif
 
-#ifdef CONFIG_FTRACE_SYSCALLS
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
-extern unsigned int sys_call_table[];
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
 
-unsigned long __init arch_syscall_addr(int nr)
+int ftrace_enable_ftrace_graph_caller(void)
 {
-	return (unsigned long)sys_call_table[nr];
+	unsigned long ip = (unsigned long)(&ftrace_graph_call);
+	u32 old, new;
+
+	old = *(u32 *) &ftrace_graph_call;
+	new = ftrace_call_replace(ip, (unsigned long) &ftrace_graph_caller);
+	return ftrace_modify_code(ip, old, new);
 }
 
-#endif
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)(&ftrace_graph_call);
+	u32 old, new;
+
+	old = *(u32 *) &ftrace_graph_call;
+	new = ftrace_call_replace(ip, (unsigned long) &ftrace_stub);
+
+	return ftrace_modify_code(ip, old, new);
+}
+
+#endif /* !CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+unsigned long prepare_ftrace_return(unsigned long parent,
+				    unsigned long self_addr,
+				    unsigned long frame_pointer)
+{
+	unsigned long return_hooker = (unsigned long) &return_to_handler;
+	struct ftrace_graph_ent trace;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return parent + 8UL;
+
+	if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
+				     frame_pointer) == -EBUSY)
+		return parent + 8UL;
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		return parent + 8UL;
+	}
+
+	return return_hooker;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/sparc/kernel/helpers.S b/arch/sparc/kernel/helpers.S
index 314dd0c..92090cc 100644
--- a/arch/sparc/kernel/helpers.S
+++ b/arch/sparc/kernel/helpers.S
@@ -46,6 +46,81 @@ stack_trace_flush:
 	 nop
 	.size		stack_trace_flush,.-stack_trace_flush
 
+#ifdef CONFIG_PERF_EVENTS
+	.globl		perf_arch_fetch_caller_regs
+	.type		perf_arch_fetch_caller_regs,#function
+perf_arch_fetch_caller_regs:
+	/* We always read the %pstate into %o5 since we will use
+	 * that to construct a fake %tstate to store into the regs.
+	 */
+	rdpr		%pstate, %o5
+	brz,pn		%o2, 50f
+	 mov		%o2, %g7
+
+	/* Turn off interrupts while we walk around the register
+	 * window by hand.
+	 */
+	wrpr		%o5, PSTATE_IE, %pstate
+
+	/* The %canrestore tells us how many register windows are
+	 * still live in the chip above us, past that we have to
+	 * walk the frame as saved on the stack.   We stash away
+	 * the %cwp in %g1 so we can return back to the original
+	 * register window.
+	 */
+	rdpr		%cwp, %g1
+	rdpr		%canrestore, %g2
+	sub		%g1, 1, %g3
+
+	/* We have the skip count in %g7, if it hits zero then
+	 * %fp/%i7 are the registers we need.  Otherwise if our
+	 * %canrestore count maintained in %g2 hits zero we have
+	 * to start traversing the stack.
+	 */
+10:	brz,pn		%g2, 4f
+	 sub		%g2, 1, %g2
+	wrpr		%g3, %cwp
+	subcc		%g7, 1, %g7
+	bne,pt		%xcc, 10b
+	 sub		%g3, 1, %g3
+
+	/* We found the values we need in the cpu's register
+	 * windows.
+	 */
+	mov		%fp, %g3
+	ba,pt		%xcc, 3f
+	 mov		%i7, %g2
+
+50:	mov		%fp, %g3
+	ba,pt		%xcc, 2f
+	 mov		%i7, %g2
+
+	/* We hit the end of the valid register windows in the
+	 * cpu, start traversing the stack frame.
+	 */
+4:	mov		%fp, %g3
+
+20:	ldx		[%g3 + STACK_BIAS + RW_V9_I7], %g2
+	subcc		%g7, 1, %g7
+	bne,pn		%xcc, 20b
+	 ldx		[%g3 + STACK_BIAS + RW_V9_I6], %g3
+
+	/* Restore the current register window position and
+	 * re-enable interrupts.
+	 */
+3:	wrpr		%g1, %cwp
+	wrpr		%o5, %pstate
+
+2:	stx		%g3, [%o0 + PT_V9_FP]
+	sllx		%o5, 8, %o5
+	stx		%o5, [%o0 + PT_V9_TSTATE]
+	stx		%g2, [%o0 + PT_V9_TPC]
+	add		%g2, 4, %g2
+	retl
+	 stx		%g2, [%o0 + PT_V9_TNPC]
+	.size		perf_arch_fetch_caller_regs,.-perf_arch_fetch_caller_regs
+#endif /* CONFIG_PERF_EVENTS */
+
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 	.type		hard_smp_processor_id,#function
diff --git a/arch/sparc/kernel/hvapi.c b/arch/sparc/kernel/hvapi.c
index 1d272c3..7c60afb 100644
--- a/arch/sparc/kernel/hvapi.c
+++ b/arch/sparc/kernel/hvapi.c
@@ -5,7 +5,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 
 #include <asm/hypervisor.h>
 #include <asm/oplib.h>
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 5fad949..47977a7 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -6,6 +6,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
@@ -862,13 +863,3 @@ int dma_supported(struct device *dev, u64 device_mask)
 	return 0;
 }
 EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EINVAL;
-}
-EXPORT_SYMBOL(dma_set_mask);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 3c8c44f..703e4aa 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -290,7 +290,7 @@ static void *sbus_alloc_coherent(struct device *dev, size_t len,
 	if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
-	res->name = op->node->name;
+	res->name = op->dev.of_node->name;
 
 	return (void *)(unsigned long)res->start;
 
@@ -676,17 +676,6 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-
 #ifdef CONFIG_PROC_FS
 
 static int sparc_io_proc_show(struct seq_file *m, void *v)
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e1cbdb9..830d70a 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,9 @@
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/ftrace.h>
 #include <linux/irq.h>
+#include <linux/kmemleak.h>
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -45,6 +47,7 @@
 
 #include "entry.h"
 #include "cpumap.h"
+#include "kstack.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
 
@@ -647,6 +650,14 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 	bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
 	if (unlikely(!bucket))
 		return 0;
+
+	/* The only reference we store to the IRQ bucket is
+	 * by physical address which kmemleak can't see, tell
+	 * it that this object explicitly is not a leak and
+	 * should be scanned.
+	 */
+	kmemleak_not_leak(bucket);
+
 	__flush_dcache_range((unsigned long) bucket,
 			     ((unsigned long) bucket +
 			      sizeof(struct ino_bucket)));
@@ -703,25 +714,7 @@ void ack_bad_irq(unsigned int virt_irq)
 void *hardirq_stack[NR_CPUS];
 void *softirq_stack[NR_CPUS];
 
-static __attribute__((always_inline)) void *set_hardirq_stack(void)
-{
-	void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
-
-	__asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
-	if (orig_sp < sp ||
-	    orig_sp > (sp + THREAD_SIZE)) {
-		sp += THREAD_SIZE - 192 - STACK_BIAS;
-		__asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
-	}
-
-	return orig_sp;
-}
-static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
-{
-	__asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
+void __irq_entry handler_irq(int irq, struct pt_regs *regs)
 {
 	unsigned long pstate, bucket_pa;
 	struct pt_regs *old_regs;
diff --git a/arch/sparc/kernel/kgdb_32.c b/arch/sparc/kernel/kgdb_32.c
index 04df4ed..539243b 100644
--- a/arch/sparc/kernel/kgdb_32.c
+++ b/arch/sparc/kernel/kgdb_32.c
@@ -158,6 +158,12 @@ void kgdb_arch_exit(void)
 {
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+	regs->npc = regs->pc + 4;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: ta 0x7d */
 	.gdb_bpt_instr		= { 0x91, 0xd0, 0x20, 0x7d },
diff --git a/arch/sparc/kernel/kgdb_64.c b/arch/sparc/kernel/kgdb_64.c
index f5a0fd4..768290a 100644
--- a/arch/sparc/kernel/kgdb_64.c
+++ b/arch/sparc/kernel/kgdb_64.c
@@ -5,6 +5,7 @@
 
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
+#include <linux/ftrace.h>
 
 #include <asm/kdebug.h>
 #include <asm/ptrace.h>
@@ -108,7 +109,7 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_SMP
-void smp_kgdb_capture_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_kgdb_capture_client(int irq, struct pt_regs *regs)
 {
 	unsigned long flags;
 
@@ -180,6 +181,12 @@ void kgdb_arch_exit(void)
 {
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->tpc = ip;
+	regs->tnpc = regs->tpc + 4;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: ta 0x72 */
 	.gdb_bpt_instr		= { 0x91, 0xd0, 0x20, 0x72 },
diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index 6716584..a39d1ba 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -7,6 +7,7 @@
 #include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>
+#include <linux/slab.h>
 #include <asm/signal.h>
 #include <asm/cacheflush.h>
 #include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/kstack.h b/arch/sparc/kernel/kstack.h
index 4248d96..53dfb92 100644
--- a/arch/sparc/kernel/kstack.h
+++ b/arch/sparc/kernel/kstack.h
@@ -11,6 +11,10 @@ static inline bool kstack_valid(struct thread_info *tp, unsigned long sp)
 {
 	unsigned long base = (unsigned long) tp;
 
+	/* Stack pointer must be 16-byte aligned.  */
+	if (sp & (16UL - 1))
+		return false;
+
 	if (sp >= (base + sizeof(struct thread_info)) &&
 	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
 		return true;
@@ -57,4 +61,23 @@ check_magic:
 
 }
 
+static inline __attribute__((always_inline)) void *set_hardirq_stack(void)
+{
+	void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
+
+	__asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
+	if (orig_sp < sp ||
+	    orig_sp > (sp + THREAD_SIZE)) {
+		sp += THREAD_SIZE - 192 - STACK_BIAS;
+		__asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
+	}
+
+	return orig_sp;
+}
+
+static inline __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
+{
+	__asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
+}
+
 #endif /* _KSTACK_H */
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 00d034e..3ae36f3 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 87f1760..6a7b4db 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -7,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
-#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
@@ -124,7 +123,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 
 		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
 		      (1<<LEON3_GPTIMER_SEPIRQ))) {
-			prom_printf("irq timer not configured with seperate irqs \n");
+			prom_printf("irq timer not configured with separate irqs\n");
 			BUG();
 		}
 
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 05c0dad..e1656fc 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -22,6 +22,7 @@
 #include <linux/profile.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
@@ -177,7 +178,7 @@ void __init leon_boot_cpus(void)
 	int nrcpu = leon_smp_nrcpus();
 	int me = smp_processor_id();
 
-	printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x \n", (unsigned int)me,
+	printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x\n", (unsigned int)me,
 	       (unsigned int)nrcpu, (unsigned int)NR_CPUS,
 	       (unsigned int)&(leon3_irqctrl_regs->mpstatus));
 
@@ -226,7 +227,7 @@ int __cpuinit leon_boot_one_cpu(int i)
 			break;
 		udelay(200);
 	}
-	printk(KERN_INFO "Started CPU %d \n", (unsigned int)i);
+	printk(KERN_INFO "Started CPU %d\n", (unsigned int)i);
 
 	if (!(cpu_callin_map[i])) {
 		printk(KERN_ERR "Processor %d is stuck.\n", i);
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index cdc91d9..83e85c2 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -4,7 +4,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/list.h>
 #include <linux/slab.h>
@@ -86,7 +86,7 @@ static void mdesc_handle_init(struct mdesc_handle *hp,
 	hp->handle_size = handle_size;
 }
 
-static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
+static struct mdesc_handle * __init mdesc_memblock_alloc(unsigned int mdesc_size)
 {
 	unsigned int handle_size, alloc_size;
 	struct mdesc_handle *hp;
@@ -97,7 +97,7 @@ static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
 		       mdesc_size);
 	alloc_size = PAGE_ALIGN(handle_size);
 
-	paddr = lmb_alloc(alloc_size, PAGE_SIZE);
+	paddr = memblock_alloc(alloc_size, PAGE_SIZE);
 
 	hp = NULL;
 	if (paddr) {
@@ -107,7 +107,7 @@ static struct mdesc_handle * __init mdesc_lmb_alloc(unsigned int mdesc_size)
 	return hp;
 }
 
-static void mdesc_lmb_free(struct mdesc_handle *hp)
+static void mdesc_memblock_free(struct mdesc_handle *hp)
 {
 	unsigned int alloc_size;
 	unsigned long start;
@@ -120,9 +120,9 @@ static void mdesc_lmb_free(struct mdesc_handle *hp)
 	free_bootmem_late(start, alloc_size);
 }
 
-static struct mdesc_mem_ops lmb_mdesc_ops = {
-	.alloc = mdesc_lmb_alloc,
-	.free  = mdesc_lmb_free,
+static struct mdesc_mem_ops memblock_mdesc_ops = {
+	.alloc = mdesc_memblock_alloc,
+	.free  = mdesc_memblock_free,
 };
 
 static struct mdesc_handle *mdesc_kmalloc(unsigned int mdesc_size)
@@ -914,7 +914,7 @@ void __init sun4v_mdesc_init(void)
 
 	printk("MDESC: Size is %lu bytes.\n", len);
 
-	hp = mdesc_alloc(len, &lmb_mdesc_ops);
+	hp = mdesc_alloc(len, &memblock_mdesc_ops);
 	if (hp == NULL) {
 		prom_printf("MDESC: alloc of %lu bytes failed.\n", len);
 		prom_halt();
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 0ee642f..f848aad 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -9,9 +9,9 @@
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
+#include <linux/gfp.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 
 #include <asm/processor.h>
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index d242a73..a4bd7ba 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -21,9 +21,10 @@
 
 #include <asm/perf_event.h>
 #include <asm/ptrace.h>
-#include <asm/local.h>
 #include <asm/pcr.h>
 
+#include "kstack.h"
+
 /* We don't have a real NMI on sparc64, but we can fake one
  * up using profiling counter overflow interrupts and interrupt
  * levels.
@@ -93,7 +94,7 @@ static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
 notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 {
 	unsigned int sum, touched = 0;
-	int cpu = smp_processor_id();
+	void *orig_sp;
 
 	clear_softint(1 << irq);
 
@@ -101,31 +102,35 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 
 	nmi_enter();
 
+	orig_sp = set_hardirq_stack();
+
 	if (notify_die(DIE_NMI, "nmi", regs, 0,
 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
 		touched = 1;
 	else
 		pcr_ops->write(PCR_PIC_PRIV);
 
-	sum = kstat_irqs_cpu(0, cpu);
+	sum = local_cpu_data().irq0_irqs;
 	if (__get_cpu_var(nmi_touch)) {
 		__get_cpu_var(nmi_touch) = 0;
 		touched = 1;
 	}
 	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		__this_cpu_inc(per_cpu_var(alert_counter));
-		if (__this_cpu_read(per_cpu_var(alert_counter)) == 30 * nmi_hz)
+		__this_cpu_inc(alert_counter);
+		if (__this_cpu_read(alert_counter) == 30 * nmi_hz)
 			die_nmi("BUG: NMI Watchdog detected LOCKUP",
 				regs, panic_on_timeout);
 	} else {
 		__get_cpu_var(last_irq_sum) = sum;
-		__this_cpu_write(per_cpu_var(alert_counter), 0);
+		__this_cpu_write(alert_counter, 0);
 	}
 	if (__get_cpu_var(wd_enabled)) {
 		write_pic(picl_value(nmi_hz));
 		pcr_ops->write(pcr_enable);
 	}
 
+	restore_hardirq_stack(orig_sp);
+
 	nmi_exit();
 }
 
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 4c26eb5..47e63f1 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -105,7 +105,7 @@ static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 
 static int of_bus_ambapp_match(struct device_node *np)
 {
-	return !strcmp(np->name, "ambapp");
+	return !strcmp(np->type, "ambapp");
 }
 
 static void of_bus_ambapp_count_cells(struct device_node *child,
@@ -254,10 +254,10 @@ static void __init build_device_resources(struct of_device *op,
 		return;
 
 	p_op = to_of_device(parent);
-	bus = of_match_bus(p_op->node);
-	bus->count_cells(op->node, &na, &ns);
+	bus = of_match_bus(p_op->dev.of_node);
+	bus->count_cells(op->dev.of_node, &na, &ns);
 
-	preg = of_get_property(op->node, bus->addr_prop_name, &num_reg);
+	preg = of_get_property(op->dev.of_node, bus->addr_prop_name, &num_reg);
 	if (!preg || num_reg == 0)
 		return;
 
@@ -271,8 +271,8 @@ static void __init build_device_resources(struct of_device *op,
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
 		const u32 *reg = (preg + (index * ((na + ns) * 4)));
-		struct device_node *dp = op->node;
-		struct device_node *pp = p_op->node;
+		struct device_node *dp = op->dev.of_node;
+		struct device_node *pp = p_op->dev.of_node;
 		struct of_bus *pbus, *dbus;
 		u64 size, result = OF_BAD_ADDR;
 		unsigned long flags;
@@ -321,7 +321,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		if (of_resource_verbose)
 			printk("%s reg[%d] -> %llx\n",
-			       op->node->full_name, index,
+			       op->dev.of_node->full_name, index,
 			       result);
 
 		if (result != OF_BAD_ADDR) {
@@ -329,7 +329,7 @@ static void __init build_device_resources(struct of_device *op,
 			r->end = result + size - 1;
 			r->flags = flags | ((result >> 32ULL) & 0xffUL);
 		}
-		r->name = op->node->name;
+		r->name = op->dev.of_node->name;
 	}
 }
 
@@ -345,10 +345,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 		return NULL;
 
 	sd = &op->dev.archdata;
-	sd->prom_node = dp;
 	sd->op = op;
 
-	op->node = dp;
+	op->dev.of_node = dp;
 
 	op->clock_freq = of_getintprop_default(dp, "clock-frequency",
 					       (25*1000*1000));
@@ -433,7 +432,7 @@ build_resources:
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
-		dev_set_name(&op->dev, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->phandle);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 0a6f2d1..1dae807 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -323,10 +323,10 @@ static void __init build_device_resources(struct of_device *op,
 		return;
 
 	p_op = to_of_device(parent);
-	bus = of_match_bus(p_op->node);
-	bus->count_cells(op->node, &na, &ns);
+	bus = of_match_bus(p_op->dev.of_node);
+	bus->count_cells(op->dev.of_node, &na, &ns);
 
-	preg = of_get_property(op->node, bus->addr_prop_name, &num_reg);
+	preg = of_get_property(op->dev.of_node, bus->addr_prop_name, &num_reg);
 	if (!preg || num_reg == 0)
 		return;
 
@@ -340,7 +340,7 @@ static void __init build_device_resources(struct of_device *op,
 	if (num_reg > PROMREG_MAX) {
 		printk(KERN_WARNING "%s: Too many regs (%d), "
 		       "limiting to %d.\n",
-		       op->node->full_name, num_reg, PROMREG_MAX);
+		       op->dev.of_node->full_name, num_reg, PROMREG_MAX);
 		num_reg = PROMREG_MAX;
 	}
 
@@ -348,8 +348,8 @@ static void __init build_device_resources(struct of_device *op,
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
 		const u32 *reg = (preg + (index * ((na + ns) * 4)));
-		struct device_node *dp = op->node;
-		struct device_node *pp = p_op->node;
+		struct device_node *dp = op->dev.of_node;
+		struct device_node *pp = p_op->dev.of_node;
 		struct of_bus *pbus, *dbus;
 		u64 size, result = OF_BAD_ADDR;
 		unsigned long flags;
@@ -397,7 +397,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		if (of_resource_verbose)
 			printk("%s reg[%d] -> %llx\n",
-			       op->node->full_name, index,
+			       op->dev.of_node->full_name, index,
 			       result);
 
 		if (result != OF_BAD_ADDR) {
@@ -408,7 +408,7 @@ static void __init build_device_resources(struct of_device *op,
 			r->end = result + size - 1;
 			r->flags = flags;
 		}
-		r->name = op->node->name;
+		r->name = op->dev.of_node->name;
 	}
 }
 
@@ -530,7 +530,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 						struct device *parent,
 						unsigned int irq)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct device_node *pp, *ip;
 	unsigned int orig_irq = irq;
 	int nid;
@@ -575,7 +575,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 
 			if (of_irq_verbose)
 				printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
-				       op->node->full_name,
+				       op->dev.of_node->full_name,
 				       pp->full_name, this_orig_irq,
 				       (iret ? iret->full_name : "NULL"), irq);
 
@@ -594,7 +594,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 				if (of_irq_verbose)
 					printk("%s: PCI swizzle [%s] "
 					       "%x --> %x\n",
-					       op->node->full_name,
+					       op->dev.of_node->full_name,
 					       pp->full_name, this_orig_irq,
 					       irq);
 
@@ -611,11 +611,11 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 	if (!ip)
 		return orig_irq;
 
-	irq = ip->irq_trans->irq_build(op->node, irq,
+	irq = ip->irq_trans->irq_build(op->dev.of_node, irq,
 				       ip->irq_trans->data);
 	if (of_irq_verbose)
 		printk("%s: Apply IRQ trans [%s] %x --> %x\n",
-		       op->node->full_name, ip->full_name, orig_irq, irq);
+		      op->dev.of_node->full_name, ip->full_name, orig_irq, irq);
 
 out:
 	nid = of_node_to_nid(dp);
@@ -640,10 +640,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 		return NULL;
 
 	sd = &op->dev.archdata;
-	sd->prom_node = dp;
 	sd->op = op;
 
-	op->node = dp;
+	op->dev.of_node = dp;
 
 	op->clock_freq = of_getintprop_default(dp, "clock-frequency",
 					       (25*1000*1000));
@@ -676,7 +675,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
-		dev_set_name(&op->dev, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->phandle);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
index cb8eb79..10c6c36 100644
--- a/arch/sparc/kernel/of_device_common.c
+++ b/arch/sparc/kernel/of_device_common.c
@@ -4,7 +4,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/irq.h>
 #include <linux/of_device.h>
@@ -17,7 +16,7 @@ static int node_match(struct device *dev, void *data)
 	struct of_device *op = to_of_device(dev);
 	struct device_node *dp = data;
 
-	return (op->node == dp);
+	return (op->dev.of_node == dp);
 }
 
 struct of_device *of_find_device_by_node(struct device_node *dp)
@@ -49,7 +48,7 @@ EXPORT_SYMBOL(irq_of_parse_and_map);
 void of_propagate_archdata(struct of_device *bus)
 {
 	struct dev_archdata *bus_sd = &bus->dev.archdata;
-	struct device_node *bus_dp = bus->node;
+	struct device_node *bus_dp = bus->dev.of_node;
 	struct device_node *dp;
 
 	for (dp = bus_dp->child; dp; dp = dp->sibling) {
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 539e83f..8a8363a 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -247,6 +247,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 					 struct pci_bus *bus, int devfn)
 {
 	struct dev_archdata *sd;
+	struct pci_slot *slot;
 	struct of_device *op;
 	struct pci_dev *dev;
 	const char *type;
@@ -260,7 +261,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	sd->iommu = pbm->iommu;
 	sd->stc = &pbm->stc;
 	sd->host_controller = pbm;
-	sd->prom_node = node;
 	sd->op = op = of_find_device_by_node(node);
 	sd->numa_node = pbm->numa_node;
 
@@ -284,8 +284,14 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->sysdata = node;
 	dev->dev.parent = bus->bridge;
 	dev->dev.bus = &pci_bus_type;
+	dev->dev.of_node = node;
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
+	set_pcie_port_type(dev);
+
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
 
 	dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
 	dev->device = of_getintprop_default(node, "device-id", 0xffff);
@@ -322,6 +328,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
 
 	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
@@ -646,7 +653,7 @@ show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char *
 	struct device_node *dp;
 
 	pdev = to_pci_dev(dev);
-	dp = pdev->dev.archdata.prom_node;
+	dp = pdev->dev.of_node;
 
 	return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name);
 }
@@ -676,7 +683,7 @@ static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus)
 struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm,
 					    struct device *parent)
 {
-	struct device_node *node = pbm->op->node;
+	struct device_node *node = pbm->op->dev.of_node;
 	struct pci_bus *bus;
 
 	printk("PCI: Scanning PBM %s\n", node->full_name);
@@ -715,9 +722,10 @@ void pcibios_update_irq(struct pci_dev *pdev, int irq)
 {
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
@@ -1014,7 +1022,7 @@ void arch_teardown_msi_irq(unsigned int virt_irq)
 
 struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
 {
-	return pdev->dev.archdata.prom_node;
+	return pdev->dev.of_node;
 }
 EXPORT_SYMBOL(pci_device_to_OF_node);
 
@@ -1087,3 +1095,76 @@ static int __init pcibios_init(void)
 	return 0;
 }
 subsys_initcall(pcibios_init);
+
+#ifdef CONFIG_SYSFS
+static void __devinit pci_bus_slot_names(struct device_node *node,
+					 struct pci_bus *bus)
+{
+	const struct pci_slot_names {
+		u32	slot_mask;
+		char	names[0];
+	} *prop;
+	const char *sp;
+	int len, i;
+	u32 mask;
+
+	prop = of_get_property(node, "slot-names", &len);
+	if (!prop)
+		return;
+
+	mask = prop->slot_mask;
+	sp = prop->names;
+
+	if (ofpci_verbose)
+		printk("PCI: Making slots for [%s] mask[0x%02x]\n",
+		       node->full_name, mask);
+
+	i = 0;
+	while (mask) {
+		struct pci_slot *pci_slot;
+		u32 this_bit = 1 << i;
+
+		if (!(mask & this_bit)) {
+			i++;
+			continue;
+		}
+
+		if (ofpci_verbose)
+			printk("PCI: Making slot [%s]\n", sp);
+
+		pci_slot = pci_create_slot(bus, i, sp, NULL);
+		if (IS_ERR(pci_slot))
+			printk(KERN_ERR "PCI: pci_create_slot returned %ld\n",
+			       PTR_ERR(pci_slot));
+
+		sp += strlen(sp) + 1;
+		mask &= ~this_bit;
+		i++;
+	}
+}
+
+static int __init of_pci_slot_init(void)
+{
+	struct pci_bus *pbus = NULL;
+
+	while ((pbus = pci_find_next_bus(pbus)) != NULL) {
+		struct device_node *node;
+
+		if (pbus->self) {
+			/* PCI->PCI bridge */
+			node = pbus->self->dev.of_node;
+		} else {
+			struct pci_pbm_info *pbm = pbus->sysdata;
+
+			/* Host PCI controller */
+			node = pbm->op->dev.of_node;
+		}
+
+		pci_bus_slot_names(node, pbus);
+	}
+
+	return 0;
+}
+
+module_init(of_pci_slot_init);
+#endif
diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
index b775658..6c7a33a 100644
--- a/arch/sparc/kernel/pci_common.c
+++ b/arch/sparc/kernel/pci_common.c
@@ -314,12 +314,12 @@ struct pci_ops sun4v_pci_ops = {
 
 void pci_get_pbm_props(struct pci_pbm_info *pbm)
 {
-	const u32 *val = of_get_property(pbm->op->node, "bus-range", NULL);
+	const u32 *val = of_get_property(pbm->op->dev.of_node, "bus-range", NULL);
 
 	pbm->pci_first_busno = val[0];
 	pbm->pci_last_busno = val[1];
 
-	val = of_get_property(pbm->op->node, "ino-bitmap", NULL);
+	val = of_get_property(pbm->op->dev.of_node, "ino-bitmap", NULL);
 	if (val) {
 		pbm->ino_bitmap = (((u64)val[1] << 32UL) |
 				   ((u64)val[0] <<  0UL));
@@ -365,20 +365,26 @@ static void pci_register_legacy_regions(struct resource *io_res,
 
 static void pci_register_iommu_region(struct pci_pbm_info *pbm)
 {
-	const u32 *vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+	const u32 *vdma = of_get_property(pbm->op->dev.of_node, "virtual-dma",
+					  NULL);
 
 	if (vdma) {
 		struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
 
 		if (!rp) {
-			prom_printf("Cannot allocate IOMMU resource.\n");
-			prom_halt();
+			pr_info("%s: Cannot allocate IOMMU resource.\n",
+				pbm->name);
+			return;
 		}
 		rp->name = "IOMMU";
 		rp->start = pbm->mem_space.start + (unsigned long) vdma[0];
 		rp->end = rp->start + (unsigned long) vdma[1] - 1UL;
 		rp->flags = IORESOURCE_BUSY;
-		request_resource(&pbm->mem_space, rp);
+		if (request_resource(&pbm->mem_space, rp)) {
+			pr_info("%s: Unable to request IOMMU resource.\n",
+				pbm->name);
+			kfree(rp);
+		}
 	}
 }
 
@@ -389,7 +395,7 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
 	int num_pbm_ranges;
 
 	saw_mem = saw_io = 0;
-	pbm_ranges = of_get_property(pbm->op->node, "ranges", &i);
+	pbm_ranges = of_get_property(pbm->op->dev.of_node, "ranges", &i);
 	if (!pbm_ranges) {
 		prom_printf("PCI: Fatal error, missing PBM ranges property "
 			    " for %s\n",
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index d53f45b..51cfa09 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -413,7 +413,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
 				       struct of_device *op, u32 portid)
 {
 	const struct linux_prom64_registers *regs;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	int err;
 
 	pbm->numa_node = -1;
@@ -458,7 +458,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
 static int __devinit fire_probe(struct of_device *op,
 				const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
 	u32 portid;
@@ -508,8 +508,11 @@ static struct of_device_id __initdata fire_match[] = {
 };
 
 static struct of_platform_driver fire_driver = {
-	.name		= DRIVER_NAME,
-	.match_table	= fire_match,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = fire_match,
+	},
 	.probe		= fire_probe,
 };
 
diff --git a/arch/sparc/kernel/pci_msi.c b/arch/sparc/kernel/pci_msi.c
index e1b0541..548b8ca 100644
--- a/arch/sparc/kernel/pci_msi.c
+++ b/arch/sparc/kernel/pci_msi.c
@@ -4,6 +4,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include <linux/irq.h>
 
 #include "pci_impl.h"
@@ -323,7 +324,7 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 	const u32 *val;
 	int len;
 
-	val = of_get_property(pbm->op->node, "#msi-eqs", &len);
+	val = of_get_property(pbm->op->dev.of_node, "#msi-eqs", &len);
 	if (!val || len != 4)
 		goto no_msi;
 	pbm->msiq_num = *val;
@@ -346,16 +347,16 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 			u32 msi64_len;
 		} *arng;
 
-		val = of_get_property(pbm->op->node, "msi-eq-size", &len);
+		val = of_get_property(pbm->op->dev.of_node, "msi-eq-size", &len);
 		if (!val || len != 4)
 			goto no_msi;
 
 		pbm->msiq_ent_count = *val;
 
-		mqp = of_get_property(pbm->op->node,
+		mqp = of_get_property(pbm->op->dev.of_node,
 				      "msi-eq-to-devino", &len);
 		if (!mqp)
-			mqp = of_get_property(pbm->op->node,
+			mqp = of_get_property(pbm->op->dev.of_node,
 					      "msi-eq-devino", &len);
 		if (!mqp || len != sizeof(struct msiq_prop))
 			goto no_msi;
@@ -363,27 +364,27 @@ void sparc64_pbm_msi_init(struct pci_pbm_info *pbm,
 		pbm->msiq_first = mqp->first_msiq;
 		pbm->msiq_first_devino = mqp->first_devino;
 
-		val = of_get_property(pbm->op->node, "#msi", &len);
+		val = of_get_property(pbm->op->dev.of_node, "#msi", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msi_num = *val;
 
-		mrng = of_get_property(pbm->op->node, "msi-ranges", &len);
+		mrng = of_get_property(pbm->op->dev.of_node, "msi-ranges", &len);
 		if (!mrng || len != sizeof(struct msi_range_prop))
 			goto no_msi;
 		pbm->msi_first = mrng->first_msi;
 
-		val = of_get_property(pbm->op->node, "msi-data-mask", &len);
+		val = of_get_property(pbm->op->dev.of_node, "msi-data-mask", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msi_data_mask = *val;
 
-		val = of_get_property(pbm->op->node, "msix-data-width", &len);
+		val = of_get_property(pbm->op->dev.of_node, "msix-data-width", &len);
 		if (!val || len != 4)
 			goto no_msi;
 		pbm->msix_data_width = *val;
 
-		arng = of_get_property(pbm->op->node, "msi-address-ranges",
+		arng = of_get_property(pbm->op->dev.of_node, "msi-address-ranges",
 				       &len);
 		if (!arng || len != sizeof(struct addr_range_prop))
 			goto no_msi;
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 142b9d6..558a705 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -285,7 +285,7 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
 #define  PSYCHO_ECCCTRL_CE	 0x2000000000000000UL /* Enable CE INterrupts */
 static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->node);
+	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
 	int err;
@@ -507,7 +507,7 @@ static int __devinit psycho_probe(struct of_device *op,
 				  const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *pr_regs;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
 	int is_pbm_a, err;
@@ -602,8 +602,11 @@ static struct of_device_id __initdata psycho_match[] = {
 };
 
 static struct of_platform_driver psycho_driver = {
-	.name		= DRIVER_NAME,
-	.match_table	= psycho_match,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = psycho_match,
+	},
 	.probe		= psycho_probe,
 };
 
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index ba6fbeb..6dad8e3 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -310,7 +310,7 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 
 static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct device_node *dp = pbm->op->node;
+	struct device_node *dp = pbm->op->dev.of_node;
 	struct of_device *op;
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
@@ -456,7 +456,7 @@ static int __devinit sabre_probe(struct of_device *op,
 				 const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *pr_regs;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
 	u32 upa_portid, dma_mask;
 	struct iommu *iommu;
@@ -596,8 +596,11 @@ static struct of_device_id __initdata sabre_match[] = {
 };
 
 static struct of_platform_driver sabre_driver = {
-	.name		= DRIVER_NAME,
-	.match_table	= sabre_match,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = sabre_match,
+	},
 	.probe		= sabre_probe,
 };
 
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 2b5cdde..97a1ae2 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -844,7 +844,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino)
  */
 static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->node);
+	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -939,7 +939,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 
 static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->node);
+	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -1068,7 +1068,7 @@ static void __devinit schizo_scan_bus(struct pci_pbm_info *pbm,
 {
 	pbm_config_busmastering(pbm);
 	pbm->is_66mhz_capable =
-		(of_find_property(pbm->op->node, "66mhz-capable", NULL)
+		(of_find_property(pbm->op->dev.of_node, "66mhz-capable", NULL)
 		 != NULL);
 
 	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
@@ -1138,7 +1138,7 @@ static int schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	u32 dma_mask;
 	u64 control;
 
-	vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+	vdma = of_get_property(pbm->op->dev.of_node, "virtual-dma", NULL);
 	if (!vdma)
 		vdma = vdma_default;
 
@@ -1268,7 +1268,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 	    pbm->chip_version >= 0x2)
 		tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT;
 
-	if (!of_find_property(pbm->op->node, "no-bus-parking", NULL))
+	if (!of_find_property(pbm->op->dev.of_node, "no-bus-parking", NULL))
 		tmp |= SCHIZO_PCICTRL_PARK;
 	else
 		tmp &= ~SCHIZO_PCICTRL_PARK;
@@ -1311,7 +1311,7 @@ static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm,
 				     int chip_type)
 {
 	const struct linux_prom64_registers *regs;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	const char *chipset_name;
 	int is_pbm_a, err;
 
@@ -1415,7 +1415,7 @@ static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid,
 
 static int __devinit __schizo_init(struct of_device *op, unsigned long chip_type)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
 	u32 portid;
@@ -1491,8 +1491,11 @@ static struct of_device_id __initdata schizo_match[] = {
 };
 
 static struct of_platform_driver schizo_driver = {
-	.name		= DRIVER_NAME,
-	.match_table	= schizo_match,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = schizo_match,
+	},
 	.probe		= schizo_probe,
 };
 
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 23c33ff..a24af6f 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -540,7 +540,7 @@ static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
 	struct property *prop;
 	struct device_node *dp;
 
-	dp = pbm->op->node;
+	dp = pbm->op->dev.of_node;
 	prop = of_find_property(dp, "66mhz-capable", NULL);
 	pbm->is_66mhz_capable = (prop != NULL);
 	pbm->pci_bus = pci_scan_one_pbm(pbm, parent);
@@ -584,7 +584,7 @@ static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 	u32 dma_mask, dma_offset;
 	const u32 *vdma;
 
-	vdma = of_get_property(pbm->op->node, "virtual-dma", NULL);
+	vdma = of_get_property(pbm->op->dev.of_node, "virtual-dma", NULL);
 	if (!vdma)
 		vdma = vdma_default;
 
@@ -881,7 +881,7 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
 					struct of_device *op, u32 devhandle)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	int err;
 
 	pbm->numa_node = of_node_to_nid(dp);
@@ -929,7 +929,7 @@ static int __devinit pci_sun4v_probe(struct of_device *op,
 	u32 devhandle;
 	int i, err;
 
-	dp = op->node;
+	dp = op->dev.of_node;
 
 	if (!hvapi_negotiated++) {
 		err = sun4v_hvapi_register(HV_GRP_PCI,
@@ -1009,8 +1009,11 @@ static struct of_device_id __initdata pci_sun4v_match[] = {
 };
 
 static struct of_platform_driver pci_sun4v_driver = {
-	.name		= DRIVER_NAME,
-	.match_table	= pci_sun4v_match,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = pci_sun4v_match,
+	},
 	.probe		= pci_sun4v_probe,
 };
 
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 4e2724e..d36a8d3 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -585,8 +585,6 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
 			writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO);
 		}
  	}
-
-	return;
 }
 
 /*
@@ -768,9 +766,10 @@ char * __devinit pcibios_setup(char *str)
 	return str;
 }
 
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
 {
+	return res->start;
 }
 
 int pcibios_enable_device(struct pci_dev *pdev, int mask)
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 2d94e7a..c4a6a50 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -8,6 +8,7 @@
 #include <linux/irq.h>
 
 #include <linux/perf_event.h>
+#include <linux/ftrace.h>
 
 #include <asm/pil.h>
 #include <asm/pcr.h>
@@ -34,7 +35,7 @@ unsigned int picl_shift;
  * Therefore in such situations we defer the work by signalling
  * a lower level cpu IRQ.
  */
-void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
+void __irq_entry deferred_pcr_work_irq(int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
 
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index e856456..44faabc 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -14,6 +14,7 @@
 
 #include <linux/perf_event.h>
 #include <linux/kprobes.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/kdebug.h>
 #include <linux/mutex.h>
@@ -91,6 +92,8 @@ struct cpu_hw_events {
 
 	/* Enabled/disable state.  */
 	int			enabled;
+
+	unsigned int		group_flag;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
 
@@ -654,6 +657,7 @@ static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
 		cpuc->current_idx[i] = idx;
 
 		enc = perf_event_get_enc(cpuc->events[i]);
+		pcr &= ~mask_for_index(idx);
 		pcr |= event_encoding(enc, idx);
 	}
 out:
@@ -980,53 +984,6 @@ static int collect_events(struct perf_event *group, int max_count,
 	return n;
 }
 
-static void event_sched_in(struct perf_event *event, int cpu)
-{
-	event->state = PERF_EVENT_STATE_ACTIVE;
-	event->oncpu = cpu;
-	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
-	if (is_software_event(event))
-		event->pmu->enable(event);
-}
-
-int hw_perf_group_sched_in(struct perf_event *group_leader,
-			   struct perf_cpu_context *cpuctx,
-			   struct perf_event_context *ctx, int cpu)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct perf_event *sub;
-	int n0, n;
-
-	if (!sparc_pmu)
-		return 0;
-
-	n0 = cpuc->n_events;
-	n = collect_events(group_leader, perf_max_events - n0,
-			   &cpuc->event[n0], &cpuc->events[n0],
-			   &cpuc->current_idx[n0]);
-	if (n < 0)
-		return -EAGAIN;
-	if (check_excludes(cpuc->event, n0, n))
-		return -EINVAL;
-	if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0))
-		return -EAGAIN;
-	cpuc->n_events = n0 + n;
-	cpuc->n_added += n;
-
-	cpuctx->active_oncpu += n;
-	n = 1;
-	event_sched_in(group_leader, cpu);
-	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
-		if (sub->state != PERF_EVENT_STATE_OFF) {
-			event_sched_in(sub, cpu);
-			n++;
-		}
-	}
-	ctx->nr_active += n;
-
-	return 1;
-}
-
 static int sparc_pmu_enable(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
@@ -1044,11 +1001,20 @@ static int sparc_pmu_enable(struct perf_event *event)
 	cpuc->events[n0] = event->hw.event_base;
 	cpuc->current_idx[n0] = PIC_NO_INDEX;
 
+	/*
+	 * If group events scheduling transaction was started,
+	 * skip the schedulability test here, it will be peformed
+	 * at commit time(->commit_txn) as a whole
+	 */
+	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+		goto nocheck;
+
 	if (check_excludes(cpuc->event, n0, 1))
 		goto out;
 	if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1))
 		goto out;
 
+nocheck:
 	cpuc->n_events++;
 	cpuc->n_added++;
 
@@ -1128,11 +1094,61 @@ static int __hw_perf_event_init(struct perf_event *event)
 	return 0;
 }
 
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+static void sparc_pmu_start_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+static void sparc_pmu_cancel_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+static int sparc_pmu_commit_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int n;
+
+	if (!sparc_pmu)
+		return -EINVAL;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	n = cpuc->n_events;
+	if (check_excludes(cpuc->event, 0, n))
+		return -EINVAL;
+	if (sparc_check_constraints(cpuc->event, cpuc->events, n))
+		return -EAGAIN;
+
+	return 0;
+}
+
 static const struct pmu pmu = {
 	.enable		= sparc_pmu_enable,
 	.disable	= sparc_pmu_disable,
 	.read		= sparc_pmu_read,
 	.unthrottle	= sparc_pmu_unthrottle,
+	.start_txn	= sparc_pmu_start_txn,
+	.cancel_txn	= sparc_pmu_cancel_txn,
+	.commit_txn	= sparc_pmu_commit_txn,
 };
 
 const struct pmu *hw_perf_event_init(struct perf_event *event)
@@ -1189,7 +1205,7 @@ static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
-	data.addr = 0;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
@@ -1276,6 +1292,9 @@ static void perf_callchain_kernel(struct pt_regs *regs,
 				  struct perf_callchain_entry *entry)
 {
 	unsigned long ksp, fp;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	int graph = 0;
+#endif
 
 	callchain_store(entry, PERF_CONTEXT_KERNEL);
 	callchain_store(entry, regs->tpc);
@@ -1303,6 +1322,16 @@ static void perf_callchain_kernel(struct pt_regs *regs,
 			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 		callchain_store(entry, pc);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+		if ((pc + 8UL) == (unsigned long) &return_to_handler) {
+			int index = current->curr_ret_stack;
+			if (current->ret_stack && index >= graph) {
+				pc = current->ret_stack[index - graph].ret;
+				callchain_store(entry, pc);
+				graph++;
+			}
+		}
+#endif
 	} while (entry->nr < PERF_MAX_STACK_DEPTH);
 }
 
@@ -1337,7 +1366,7 @@ static void perf_callchain_user_32(struct pt_regs *regs,
 	callchain_store(entry, PERF_CONTEXT_USER);
 	callchain_store(entry, regs->tpc);
 
-	ufp = regs->u_regs[UREG_I6];
+	ufp = regs->u_regs[UREG_I6] & 0xffffffffUL;
 	do {
 		struct sparc_stackf32 *usf, sf;
 		unsigned long pc;
@@ -1353,7 +1382,7 @@ static void perf_callchain_user_32(struct pt_regs *regs,
 }
 
 /* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
  */
 static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
 
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 5e4563d..9589d8b 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -79,8 +79,11 @@ static struct of_device_id __initdata pmc_match[] = {
 MODULE_DEVICE_TABLE(of, pmc_match);
 
 static struct of_platform_driver pmc_driver = {
-	.name		= "pmc",
-	.match_table	= pmc_match,
+	.driver = {
+		.name = "pmc",
+		.owner = THIS_MODULE,
+		.of_match_table = pmc_match,
+	},
 	.probe		= pmc_probe,
 };
 
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index e2a045c..168d4cb 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -41,9 +41,9 @@ static int __devinit power_probe(struct of_device *op, const struct of_device_id
 	power_reg = of_ioremap(res, 0, 0x4, "power");
 
 	printk(KERN_INFO "%s: Control reg at %llx\n",
-	       op->node->name, res->start);
+	       op->dev.of_node->name, res->start);
 
-	if (has_button_interrupt(irq, op->node)) {
+	if (has_button_interrupt(irq, op->dev.of_node)) {
 		if (request_irq(irq,
 				power_handler, 0, "power", NULL) < 0)
 			printk(KERN_ERR "power: Cannot setup IRQ handler.\n");
@@ -60,10 +60,11 @@ static struct of_device_id __initdata power_match[] = {
 };
 
 static struct of_platform_driver power_driver = {
-	.match_table	= power_match,
 	.probe		= power_probe,
-	.driver		= {
-		.name	= "power",
+	.driver = {
+		.name = "power",
+		.owner = THIS_MODULE,
+		.of_match_table = power_match,
 	},
 };
 
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 2830b41..40e29fc 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -17,13 +17,13 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/smp.h>
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 
 #include <asm/auxio.h>
 #include <asm/oplib.h>
@@ -526,7 +526,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 			 * Set some valid stack frames to give to the child.
 			 */
 			childstack = (struct sparc_stackf __user *)
-				(sp & ~0x7UL);
+				(sp & ~0xfUL);
 			parentstack = (struct sparc_stackf __user *)
 				regs->u_regs[UREG_FP];
 
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index c3f1cce..dbe81a3 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -202,6 +202,7 @@ void show_regs(struct pt_regs *regs)
 	       regs->u_regs[15]);
 	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
+	show_stack(current, (unsigned long *) regs->u_regs[UREG_FP]);
 }
 
 struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
@@ -352,12 +353,6 @@ void exit_thread(void)
 		else
 			t->utraps[0]--;
 	}
-
-	if (test_and_clear_thread_flag(TIF_PERFCTR)) {
-		t->user_cntd0 = t->user_cntd1 = NULL;
-		t->pcr_reg = 0;
-		write_pcr(0);
-	}
 }
 
 void flush_thread(void)
@@ -371,13 +366,6 @@ void flush_thread(void)
 
 	set_thread_wsaved(0);
 
-	/* Turn off performance counters if on. */
-	if (test_and_clear_thread_flag(TIF_PERFCTR)) {
-		t->user_cntd0 = t->user_cntd1 = NULL;
-		t->pcr_reg = 0;
-		write_pcr(0);
-	}
-
 	/* Clear FPU register state. */
 	t->fpsaved[0] = 0;
 	
@@ -398,11 +386,11 @@ static unsigned long clone_stackframe(unsigned long csp, unsigned long psp)
 	} else
 		__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
 
-	/* Now 8-byte align the stack as this is mandatory in the
-	 * Sparc ABI due to how register windows work.  This hides
-	 * the restriction from thread libraries etc.  -DaveM
+	/* Now align the stack as this is mandatory in the Sparc ABI
+	 * due to how register windows work.  This hides the
+	 * restriction from thread libraries etc.
 	 */
-	csp &= ~7UL;
+	csp &= ~15UL;
 
 	distance = fp - psp;
 	rval = (csp - distance);
@@ -591,16 +579,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		t->kregs->u_regs[UREG_FP] =
 		  ((unsigned long) child_sf) - STACK_BIAS;
 
-		/* Special case, if we are spawning a kernel thread from
-		 * a userspace task (usermode helper, NFS or similar), we
-		 * must disable performance counters in the child because
-		 * the address space and protection realm are changing.
-		 */
-		if (t->flags & _TIF_PERFCTR) {
-			t->user_cntd0 = t->user_cntd1 = NULL;
-			t->pcr_reg = 0;
-			t->flags &= ~_TIF_PERFCTR;
-		}
 		t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
 		t->kregs->u_regs[UREG_G6] = (unsigned long) t;
 		t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index 453397f..a8591ef 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -4,9 +4,6 @@
 #include <linux/spinlock.h>
 #include <asm/prom.h>
 
-extern struct device_node *allnodes;	/* temporary while merging */
-extern rwlock_t devtree_lock;	/* temporary while merging */
-
 extern void * prom_early_alloc(unsigned long size);
 extern void irq_trans_init(struct device_node *dp);
 
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index fb06ac2..466a327 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -20,7 +20,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_device.h>
 
 #include <asm/prom.h>
@@ -34,7 +34,7 @@
 
 void * __init prom_early_alloc(unsigned long size)
 {
-	unsigned long paddr = lmb_alloc(size, SMP_CACHE_BYTES);
+	unsigned long paddr = memblock_alloc(size, SMP_CACHE_BYTES);
 	void *ret;
 
 	if (!paddr) {
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index d80a65d..57ac9e2 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -37,18 +37,6 @@ EXPORT_SYMBOL(of_console_path);
 char *of_console_options;
 EXPORT_SYMBOL(of_console_options);
 
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np; np = np->allnext)
-		if (np->node == handle)
-			break;
-
-	return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
 int of_getintprop_default(struct device_node *np, const char *name, int def)
 {
 	struct property *prop;
@@ -89,7 +77,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
-			ret = prom_setprop(dp->node, name, val, len);
+			ret = prom_setprop(dp->phandle, name, val, len);
 
 			err = -EINVAL;
 			if (ret >= 0) {
@@ -236,7 +224,7 @@ static struct device_node * __init prom_create_node(phandle node,
 
 	dp->name = get_one_property(node, "name");
 	dp->type = get_one_property(node, "device_type");
-	dp->node = node;
+	dp->phandle = node;
 
 	dp->properties = build_prop_list(node);
 
@@ -313,7 +301,7 @@ void __init prom_build_devicetree(void)
 
 	nextp = &allnodes->allnext;
 	allnodes->child = prom_build_tree(allnodes,
-					  prom_getchild(allnodes->node),
+					  prom_getchild(allnodes->phandle),
 					  &nextp);
 	of_console_init();
 
diff --git a/arch/sparc/kernel/psycho_common.c b/arch/sparc/kernel/psycho_common.c
index 8f1478475..3f34ac8 100644
--- a/arch/sparc/kernel/psycho_common.c
+++ b/arch/sparc/kernel/psycho_common.c
@@ -450,7 +450,7 @@ int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize,
 void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct of_device *op,
 			    const char *chip_name, int chip_type)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 
 	pbm->name = dp->full_name;
 	pbm->numa_node = -1;
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 7e3dfd9..e608f39 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -65,6 +65,7 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(*k++, &reg_window[pos++]))
 				return -EFAULT;
@@ -76,6 +77,7 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(reg, &reg_window[pos++]) ||
 			    put_user(reg, u++))
@@ -141,6 +143,7 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (put_user(*k++, &reg_window[pos++]))
 				return -EFAULT;
@@ -153,6 +156,7 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		for (; count > 0 && pos < 32; count--) {
 			if (get_user(reg, u++) ||
 			    put_user(reg, &reg_window[pos++]))
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index 2f6524d..aa90da0 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -492,6 +492,7 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(*k++, &reg_window[pos++]))
@@ -516,6 +517,7 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(reg, &reg_window[pos++]) ||
@@ -599,6 +601,7 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (put_user(*k++, &reg_window[pos++]))
@@ -625,6 +628,7 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+		reg_window -= 16;
 		if (target == current) {
 			for (; count > 0 && pos < 32; count--) {
 				if (get_user(reg, u++) ||
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index fd3cee4..090b9e9 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -65,48 +65,6 @@ __handle_user_windows:
 		ba,pt			%xcc, __handle_user_windows_continue
 
 		 andn			%l1, %l4, %l1
-__handle_perfctrs:
-		call			update_perfctrs
-		 wrpr			%g0, RTRAP_PSTATE, %pstate
-		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
-		ldub			[%g6 + TI_WSAVED], %o2
-		brz,pt			%o2, 1f
-		 nop
-		/* Redo userwin+sched+sig checks */
-		call			fault_in_user_windows
-
-		 wrpr			%g0, RTRAP_PSTATE, %pstate
-		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
-		ldx			[%g6 + TI_FLAGS], %l0
-		andcc			%l0, _TIF_NEED_RESCHED, %g0
-		be,pt			%xcc, 1f
-
-		 nop
-		call			schedule
-		 wrpr			%g0, RTRAP_PSTATE, %pstate
-		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
-		ldx			[%g6 + TI_FLAGS], %l0
-1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
-
-		be,pt			%xcc, __handle_perfctrs_continue
-		 sethi			%hi(TSTATE_PEF), %o0
-		mov			%l5, %o1
-		add			%sp, PTREGS_OFF, %o0
-		mov			%l0, %o2
-		call			do_notify_resume
-
-		 wrpr			%g0, RTRAP_PSTATE, %pstate
-		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
-		/* Signal delivery can modify pt_regs tstate, so we must
-		 * reload it.
-		 */
-		ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-		sethi			%hi(0xf << 20), %l4
-		and			%l1, %l4, %l4
-		andn			%l1, %l4, %l1
-		ba,pt			%xcc, __handle_perfctrs_continue
-
-		 sethi			%hi(TSTATE_PEF), %o0
 __handle_userfpu:
 		rd			%fprs, %l5
 		andcc			%l5, FPRS_FEF, %g0
@@ -149,11 +107,11 @@ rtrap_nmi:	ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 rtrap_irq:
 rtrap:
 #ifndef CONFIG_SMP
-		sethi			%hi(per_cpu____cpu_data), %l0
-		lduw			[%l0 + %lo(per_cpu____cpu_data)], %l1
+		sethi			%hi(__cpu_data), %l0
+		lduw			[%l0 + %lo(__cpu_data)], %l1
 #else
-		sethi			%hi(per_cpu____cpu_data), %l0
-		or			%l0, %lo(per_cpu____cpu_data), %l0
+		sethi			%hi(__cpu_data), %l0
+		or			%l0, %lo(__cpu_data), %l0
 		lduw			[%l0 + %g5], %l1
 #endif
 		cmp			%l1, 0
@@ -172,7 +130,17 @@ rtrap_xcall:
 		 nop
 		call			trace_hardirqs_on
 		 nop
-		wrpr			%l4, %pil
+		/* Do not actually set the %pil here.  We will do that
+		 * below after we clear PSTATE_IE in the %pstate register.
+		 * If we re-enable interrupts here, we can recurse down
+		 * the hardirq stack potentially endlessly, causing a
+		 * stack overflow.
+		 *
+		 * It is tempting to put this test and trace_hardirqs_on
+		 * call at the 'rt_continue' label, but that will not work
+		 * as that path hits unconditionally and we do not want to
+		 * execute this in NMI return paths, for example.
+		 */
 #endif
 rtrap_no_irq_enable:
 		andcc			%l1, TSTATE_PRIV, %l3
@@ -191,9 +159,9 @@ rtrap_no_irq_enable:
 		 * take until the next local IRQ before the signal/resched
 		 * event would be handled.
 		 *
-		 * This also means that if we have to deal with performance
-		 * counters or user windows, we have to redo all of these
-		 * sched+signal checks with IRQs disabled.
+		 * This also means that if we have to deal with user
+		 * windows, we have to redo all of these sched+signal checks
+		 * with IRQs disabled.
 		 */
 to_user:	wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		wrpr			0, %pil
@@ -214,12 +182,8 @@ __handle_signal_continue:
 		brnz,pn			%o2, __handle_user_windows
 		 nop
 __handle_user_windows_continue:
-		ldx			[%g6 + TI_FLAGS], %l5
-		andcc			%l5, _TIF_PERFCTR, %g0
 		sethi			%hi(TSTATE_PEF), %o0
-		bne,pn			%xcc, __handle_perfctrs
-__handle_perfctrs_continue:
-		 andcc			%l1, %o0, %g0
+		andcc			%l1, %o0, %g0
 
 		/* This fpdepth clear is necessary for non-syscall rtraps only */
 user_nowork:
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index 406e087..cfeaf04 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -63,10 +63,10 @@ void sbus_set_sbus64(struct device *dev, int bursts)
 	int slot;
 	u64 val;
 
-	regs = of_get_property(op->node, "reg", NULL);
+	regs = of_get_property(op->dev.of_node, "reg", NULL);
 	if (!regs) {
 		printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %s\n",
-		       op->node->full_name);
+		       op->dev.of_node->full_name);
 		return;
 	}
 	slot = regs->which_io;
@@ -287,7 +287,7 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 		 SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR);
 	upa_writeq(error_bits, afsr_reg);
 
-	portid = of_getintprop_default(op->node, "portid", -1);
+	portid = of_getintprop_default(op->dev.of_node, "portid", -1);
 
 	/* Log the error. */
 	printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
@@ -361,7 +361,7 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 		 SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR);
 	upa_writeq(error_bits, afsr_reg);
 
-	portid = of_getintprop_default(op->node, "portid", -1);
+	portid = of_getintprop_default(op->dev.of_node, "portid", -1);
 
 	printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
 	       portid,
@@ -439,7 +439,7 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 		 SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR);
 	upa_writeq(error_bits, afsr_reg);
 
-	portid = of_getintprop_default(op->node, "portid", -1);
+	portid = of_getintprop_default(op->dev.of_node, "portid", -1);
 
 	/* Log the error. */
 	printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
@@ -496,7 +496,7 @@ static void __init sysio_register_error_handlers(struct of_device *op)
 	u64 control;
 	int portid;
 
-	portid = of_getintprop_default(op->node, "portid", -1);
+	portid = of_getintprop_default(op->dev.of_node, "portid", -1);
 
 	irq = sbus_build_irq(op, SYSIO_UE_INO);
 	if (request_irq(irq, sysio_ue_handler, 0,
@@ -537,7 +537,7 @@ static void __init sysio_register_error_handlers(struct of_device *op)
 static void __init sbus_iommu_init(struct of_device *op)
 {
 	const struct linux_prom64_registers *pr;
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	struct iommu *iommu;
 	struct strbuf *strbuf;
 	unsigned long regs, reg_base;
@@ -589,7 +589,7 @@ static void __init sbus_iommu_init(struct of_device *op)
 	 */
 	iommu->write_complete_reg = regs + 0x2000UL;
 
-	portid = of_getintprop_default(op->node, "portid", -1);
+	portid = of_getintprop_default(op->dev.of_node, "portid", -1);
 	printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n",
 	       portid, regs);
 
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 9be2af5..b22ce61 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -95,8 +95,6 @@ static void prom_sync_me(void)
 			     "nop\n\t"
 			     "nop\n\t" : : "r" (prom_tbr));
 	local_irq_restore(flags);
-
-	return;
 }
 
 static unsigned int boot_flags __initdata = 0;
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index a2a79e7..5f72de6 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -12,7 +12,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <asm/smp.h>
 #include <linux/user.h>
 #include <linux/screen_info.h>
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index ba5b09a..ea22cd3 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -120,8 +120,8 @@ struct rt_signal_frame32 {
 };
 
 /* Align macros */
-#define SF_ALIGNEDSZ  (((sizeof(struct signal_frame32) + 7) & (~7)))
-#define RT_ALIGNEDSZ  (((sizeof(struct rt_signal_frame32) + 7) & (~7)))
+#define SF_ALIGNEDSZ  (((sizeof(struct signal_frame32) + 15) & (~15)))
+#define RT_ALIGNEDSZ  (((sizeof(struct rt_signal_frame32) + 15) & (~15)))
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
@@ -420,15 +420,17 @@ static void __user *get_sigframe(struct sigaction *sa, struct pt_regs *regs, uns
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 7ce1a10..9882df9 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -267,15 +267,17 @@ static inline void __user *get_sigframe(struct sigaction *sa, struct pt_regs *re
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static inline int
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 647afbd..9fa48c3 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -353,7 +353,7 @@ segv:
 /* Checks if the fp is valid */
 static int invalid_frame_pointer(void __user *fp, int fplen)
 {
-	if (((unsigned long) fp) & 7)
+	if (((unsigned long) fp) & 15)
 		return 1;
 	return 0;
 }
@@ -396,15 +396,17 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static inline void
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index aa36223..b6a2b8f 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -22,7 +22,9 @@
 #include <linux/profile.h>
 #include <linux/bootmem.h>
 #include <linux/vmalloc.h>
+#include <linux/ftrace.h>
 #include <linux/cpu.h>
+#include <linux/slab.h>
 
 #include <asm/head.h>
 #include <asm/ptrace.h>
@@ -370,7 +372,7 @@ static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
 	} else {
 		struct device_node *dp = of_find_node_by_cpuid(cpu);
 
-		prom_startcpu(dp->node, entry, cookie);
+		prom_startcpu(dp->phandle, entry, cookie);
 	}
 
 	for (timeout = 0; timeout < 50000; timeout++) {
@@ -822,13 +824,13 @@ void arch_send_call_function_single_ipi(int cpu)
 		      &cpumask_of_cpu(cpu));
 }
 
-void smp_call_function_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
 	generic_smp_call_function_interrupt();
 }
 
-void smp_call_function_single_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
 	generic_smp_call_function_single_interrupt();
@@ -964,7 +966,7 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 	put_cpu();
 }
 
-void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
 {
 	struct mm_struct *mm;
 	unsigned long flags;
@@ -1148,7 +1150,7 @@ void smp_release(void)
  */
 extern void prom_world(int);
 
-void smp_penguin_jailcell(int irq, struct pt_regs *regs)
+void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
 
@@ -1364,7 +1366,7 @@ void smp_send_reschedule(int cpu)
 		      &cpumask_of_cpu(cpu));
 }
 
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs)
 {
 	clear_softint(1 << irq);
 }
diff --git a/arch/sparc/kernel/stacktrace.c b/arch/sparc/kernel/stacktrace.c
index acb12f6..3e08153 100644
--- a/arch/sparc/kernel/stacktrace.c
+++ b/arch/sparc/kernel/stacktrace.c
@@ -1,6 +1,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/ftrace.h>
 #include <linux/module.h>
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
@@ -12,6 +13,10 @@ static void __save_stack_trace(struct thread_info *tp,
 			       bool skip_sched)
 {
 	unsigned long ksp, fp;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	struct task_struct *t;
+	int graph = 0;
+#endif
 
 	if (tp == current_thread_info()) {
 		stack_trace_flush();
@@ -21,6 +26,9 @@ static void __save_stack_trace(struct thread_info *tp,
 	}
 
 	fp = ksp + STACK_BIAS;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	t = tp->task;
+#endif
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
@@ -44,8 +52,21 @@ static void __save_stack_trace(struct thread_info *tp,
 
 		if (trace->skip > 0)
 			trace->skip--;
-		else if (!skip_sched || !in_sched_functions(pc))
+		else if (!skip_sched || !in_sched_functions(pc)) {
 			trace->entries[trace->nr_entries++] = pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+			if ((pc + 8UL) == (unsigned long) &return_to_handler) {
+				int index = t->curr_ret_stack;
+				if (t->ret_stack && index >= graph) {
+					pc = t->ret_stack[index - graph].ret;
+					if (trace->nr_entries <
+					    trace->max_entries)
+						trace->entries[trace->nr_entries++] = pc;
+					graph++;
+				}
+			}
+#endif
+		}
 	} while (trace->nr_entries < trace->max_entries);
 }
 
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index bc3adbf..892fb88 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index ab036a7..e11b461 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -183,7 +183,7 @@ void sun4d_free_irq(unsigned int irq, void *dev_id)
 		goto out_unlock;
 	}
 	
-	if (action && tmp)
+	if (tmp)
 		tmp->next = action->next;
 	else
 		*actionp = action->next;
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 68791ca..482f2ab 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -194,7 +194,7 @@ int __cpuinit smp4d_boot_one_cpu(int i)
 			smp_penguin_ctable.reg_size = 0;
 
 			/* whirrr, whirrr, whirrrrrrrrr... */
-			SMP_PRINTK(("Starting CPU %d at %p \n", i, entry));
+			SMP_PRINTK(("Starting CPU %d at %p\n", i, entry));
 			local_flush_cache_all();
 			prom_startcpu(cpu_node,
 				      &smp_penguin_ctable, 0, (char *)entry);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 301892e..7f3b97f 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/of.h>
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index e706113..46a76ba 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -51,7 +51,6 @@ SIGN1(sys32_exit_group, sys_exit_group, %o0)
 SIGN1(sys32_wait4, compat_sys_wait4, %o2)
 SIGN1(sys32_creat, sys_creat, %o1)
 SIGN1(sys32_mknod, sys_mknod, %o1)
-SIGN1(sys32_perfctr, sys_perfctr, %o0)
 SIGN1(sys32_umount, sys_umount, %o1)
 SIGN1(sys32_signal, sys_signal, %o0)
 SIGN1(sys32_access, sys_access, %o1)
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index dc0ac19..c0ca875 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -21,7 +21,6 @@
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
-#include <linux/slab.h>
 #include <linux/uio.h>
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
@@ -43,8 +42,8 @@
 #include <linux/security.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
-#include <linux/netfilter_ipv4/ip_tables.h>
 #include <linux/ptrace.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 3a82e65..ee995b7 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -98,119 +98,6 @@ out:
 	return error;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-
-asmlinkage int sys_ipc (uint call, int first, int second, int third, void __user *ptr, long fifth)
-{
-	int version, err;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	if (call <= SEMCTL)
-		switch (call) {
-		case SEMOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
-			goto out;
-		case SEMTIMEDOP:
-			err = sys_semtimedop (first, (struct sembuf __user *)ptr, second, (const struct timespec __user *) fifth);
-			goto out;
-		case SEMGET:
-			err = sys_semget (first, second, third);
-			goto out;
-		case SEMCTL: {
-			union semun fourth;
-			err = -EINVAL;
-			if (!ptr)
-				goto out;
-			err = -EFAULT;
-			if (get_user(fourth.__pad,
-				     (void __user * __user *)ptr))
-				goto out;
-			err = sys_semctl (first, second, third, fourth);
-			goto out;
-			}
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= MSGCTL) 
-		switch (call) {
-		case MSGSND:
-			err = sys_msgsnd (first, (struct msgbuf __user *) ptr, 
-					  second, third);
-			goto out;
-		case MSGRCV:
-			switch (version) {
-			case 0: {
-				struct ipc_kludge tmp;
-				err = -EINVAL;
-				if (!ptr)
-					goto out;
-				err = -EFAULT;
-				if (copy_from_user(&tmp, (struct ipc_kludge __user *) ptr, sizeof (tmp)))
-					goto out;
-				err = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp, third);
-				goto out;
-				}
-			case 1: default:
-				err = sys_msgrcv (first,
-						  (struct msgbuf __user *) ptr,
-						  second, fifth, third);
-				goto out;
-			}
-		case MSGGET:
-			err = sys_msgget ((key_t) first, second);
-			goto out;
-		case MSGCTL:
-			err = sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	if (call <= SHMCTL) 
-		switch (call) {
-		case SHMAT:
-			switch (version) {
-			case 0: default: {
-				ulong raddr;
-				err = do_shmat (first, (char __user *) ptr, second, &raddr);
-				if (err)
-					goto out;
-				err = -EFAULT;
-				if (put_user (raddr, (ulong __user *) third))
-					goto out;
-				err = 0;
-				goto out;
-				}
-			case 1:	/* iBCS2 emulator entry point */
-				err = -EINVAL;
-				goto out;
-			}
-		case SHMDT: 
-			err = sys_shmdt ((char __user *)ptr);
-			goto out;
-		case SHMGET:
-			err = sys_shmget (first, second, third);
-			goto out;
-		case SHMCTL:
-			err = sys_shmctl (first, second, (struct shmid_ds __user *) ptr);
-			goto out;
-		default:
-			err = -ENOSYS;
-			goto out;
-		}
-	else
-		err = -ENOSYS;
-out:
-	return err;
-}
-
 int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (ARCH_SUN4C &&
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index d77f543..3d435c4 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -27,7 +27,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/utrap.h>
-#include <asm/perfctr.h>
 #include <asm/unistd.h>
 
 #include "entry.h"
@@ -427,7 +426,7 @@ out:
  * This is really horribly ugly.
  */
 
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+SYSCALL_DEFINE6(sparc_ipc, unsigned int, call, int, first, unsigned long, second,
 		unsigned long, third, void __user *, ptr, long, fifth)
 {
 	long err;
@@ -511,17 +510,6 @@ out:
 	return err;
 }
 
-SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
-{
-	int ret = sys_newuname(name);
-	
-	if (current->personality == PER_LINUX32 && !ret) {
-		ret = (copy_to_user(name->machine, "sparc\0\0", 8)
-		       ? -EFAULT : 0);
-	}
-	return ret;
-}
-
 SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
@@ -766,109 +754,6 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
 	return ret;
 }
 
-/* Invoked by rtrap code to update performance counters in
- * user space.
- */
-asmlinkage void update_perfctrs(void)
-{
-	unsigned long pic, tmp;
-
-	read_pic(pic);
-	tmp = (current_thread_info()->kernel_cntd0 += (unsigned int)pic);
-	__put_user(tmp, current_thread_info()->user_cntd0);
-	tmp = (current_thread_info()->kernel_cntd1 += (pic >> 32));
-	__put_user(tmp, current_thread_info()->user_cntd1);
-	reset_pic();
-}
-
-SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
-		unsigned long, arg1, unsigned long, arg2)
-{
-	int err = 0;
-
-	switch(opcode) {
-	case PERFCTR_ON:
-		current_thread_info()->pcr_reg = arg2;
-		current_thread_info()->user_cntd0 = (u64 __user *) arg0;
-		current_thread_info()->user_cntd1 = (u64 __user *) arg1;
-		current_thread_info()->kernel_cntd0 =
-			current_thread_info()->kernel_cntd1 = 0;
-		write_pcr(arg2);
-		reset_pic();
-		set_thread_flag(TIF_PERFCTR);
-		break;
-
-	case PERFCTR_OFF:
-		err = -EINVAL;
-		if (test_thread_flag(TIF_PERFCTR)) {
-			current_thread_info()->user_cntd0 =
-				current_thread_info()->user_cntd1 = NULL;
-			current_thread_info()->pcr_reg = 0;
-			write_pcr(0);
-			clear_thread_flag(TIF_PERFCTR);
-			err = 0;
-		}
-		break;
-
-	case PERFCTR_READ: {
-		unsigned long pic, tmp;
-
-		if (!test_thread_flag(TIF_PERFCTR)) {
-			err = -EINVAL;
-			break;
-		}
-		read_pic(pic);
-		tmp = (current_thread_info()->kernel_cntd0 += (unsigned int)pic);
-		err |= __put_user(tmp, current_thread_info()->user_cntd0);
-		tmp = (current_thread_info()->kernel_cntd1 += (pic >> 32));
-		err |= __put_user(tmp, current_thread_info()->user_cntd1);
-		reset_pic();
-		break;
-	}
-
-	case PERFCTR_CLRPIC:
-		if (!test_thread_flag(TIF_PERFCTR)) {
-			err = -EINVAL;
-			break;
-		}
-		current_thread_info()->kernel_cntd0 =
-			current_thread_info()->kernel_cntd1 = 0;
-		reset_pic();
-		break;
-
-	case PERFCTR_SETPCR: {
-		u64 __user *user_pcr = (u64 __user *)arg0;
-
-		if (!test_thread_flag(TIF_PERFCTR)) {
-			err = -EINVAL;
-			break;
-		}
-		err |= __get_user(current_thread_info()->pcr_reg, user_pcr);
-		write_pcr(current_thread_info()->pcr_reg);
-		current_thread_info()->kernel_cntd0 =
-			current_thread_info()->kernel_cntd1 = 0;
-		reset_pic();
-		break;
-	}
-
-	case PERFCTR_GETPCR: {
-		u64 __user *user_pcr = (u64 __user *)arg0;
-
-		if (!test_thread_flag(TIF_PERFCTR)) {
-			err = -EINVAL;
-			break;
-		}
-		err |= __put_user(current_thread_info()->pcr_reg, user_pcr);
-		break;
-	}
-
-	default:
-		err = -EINVAL;
-		break;
-	};
-	return err;
-}
-
 /*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index dc4a458..1d7e274 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -110,31 +110,12 @@ sys_clone:
 
 	.globl	ret_from_syscall
 ret_from_syscall:
-	/* Clear current_thread_info()->new_child, and
-	 * check performance counter stuff too.
-	 */
+	/* Clear current_thread_info()->new_child. */
 	stb	%g0, [%g6 + TI_NEW_CHILD]
 	ldx	[%g6 + TI_FLAGS], %l0
 	call	schedule_tail
 	 mov	%g7, %o0
-	andcc	%l0, _TIF_PERFCTR, %g0
-	be,pt	%icc, 1f
-	 nop
-	ldx	[%g6 + TI_PCR], %o7
-	wr	%g0, %o7, %pcr
-
-	/* Blackbird errata workaround.  See commentary in
-	 * smp.c:smp_percpu_timer_interrupt() for more
-	 * information.
-	 */
-	ba,pt	%xcc, 99f
-	 nop
-
-	.align	64
-99:	wr	%g0, %g0, %pic
-	rd	%pic, %g0
-
-1:	ba,pt	%xcc, ret_sys_call
+	ba,pt	%xcc, ret_sys_call
 	 ldx	[%sp + PTREGS_OFF + PT_V9_I0], %o0
 
 	.globl	sparc_exit
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index ca39c60..1eb8b00 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -107,12 +107,12 @@ static unsigned long run_on_cpu(unsigned long cpu,
 	unsigned long ret;
 
 	/* should return -EINVAL to userspace */
-	if (set_cpus_allowed(current, cpumask_of_cpu(cpu)))
+	if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
 		return 0;
 
 	ret = func(arg);
 
-	set_cpus_allowed(current, old_affinity);
+	set_cpus_allowed_ptr(current, &old_affinity);
 
 	return ret;
 }
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index d2f999a..118759c 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -6,15 +6,12 @@
 #include <asm/utrap.h>
 #include <asm/signal.h>
 
-struct new_utsname;
-
 extern asmlinkage unsigned long sys_getpagesize(void);
 extern asmlinkage long sparc_pipe(struct pt_regs *regs);
-extern asmlinkage long sys_ipc(unsigned int call, int first,
+extern asmlinkage long sys_sparc_ipc(unsigned int call, int first,
 			       unsigned long second,
 			       unsigned long third,
 			       void __user *ptr, long fifth);
-extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
@@ -36,8 +33,6 @@ extern asmlinkage long sys_rt_sigaction(int sig,
 					struct sigaction __user *oact,
 					void __user *restorer,
 					size_t sigsetsize);
-extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
-				   unsigned long arg1, unsigned long arg2);
 
 extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
 extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index e575b46..9db058d 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -21,7 +21,7 @@ sys_call_table32:
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys_lchown16, sys_brk, sys32_perfctr, sys32_lseek
+/*15*/	.word sys_chmod, sys_lchown16, sys_brk, sys_nis_syscall, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
@@ -55,7 +55,7 @@ sys_call_table32:
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_newuname
 /*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
@@ -96,7 +96,7 @@ sys_call_table:
 /*0*/	.word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/	.word sys_chmod, sys_lchown, sys_brk, sys_perfctr, sys_lseek
+/*15*/	.word sys_chmod, sys_lchown, sys_brk, sys_nis_syscall, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
@@ -130,13 +130,13 @@ sys_call_table:
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
 /*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
 /*210*/	.word sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
-	.word sys_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
+	.word sys_sparc_ipc, sys_nis_syscall, sys_clone, sys_ioprio_get, sys_adjtimex
 /*220*/	.word sys_nis_syscall, sys_ni_syscall, sys_delete_module, sys_ni_syscall, sys_getpgid
 	.word sys_bdflush, sys_sysfs, sys_nis_syscall, sys_setfsuid, sys_setfsgid
 /*230*/	.word sys_select, sys_nis_syscall, sys_splice, sys_stime, sys_statfs64
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 0d4c09b..e404b06 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -78,6 +78,11 @@ __volatile__ unsigned int *master_l10_counter;
 
 u32 (*do_arch_gettimeoffset)(void);
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -87,9 +92,6 @@ u32 (*do_arch_gettimeoffset)(void);
 
 static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update;
-
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
 #endif
@@ -101,16 +103,6 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 
 	do_timer(1);
 
-	/* Determine when to update the Mostek clock. */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss(xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -152,7 +144,7 @@ static struct platform_device m48t59_rtc = {
 
 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 	const char *model = of_get_property(dp, "model", NULL);
 
 	if (!model)
@@ -185,10 +177,11 @@ static struct of_device_id __initdata clock_match[] = {
 };
 
 static struct of_platform_driver clock_driver = {
-	.match_table	= clock_match,
 	.probe		= clock_probe,
-	.driver		= {
-		.name	= "rtc",
+	.driver = {
+		.name = "rtc",
+		.owner = THIS_MODULE,
+		.of_match_table = clock_match,
 	},
 };
 
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 67e1651..21e9fca 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -35,6 +35,7 @@
 #include <linux/clocksource.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/ftrace.h>
 
 #include <asm/oplib.h>
 #include <asm/timer.h>
@@ -423,7 +424,7 @@ static int __devinit rtc_probe(struct of_device *op, const struct of_device_id *
 	struct resource *r;
 
 	printk(KERN_INFO "%s: RTC regs at 0x%llx\n",
-	       op->node->full_name, op->resource[0].start);
+	       op->dev.of_node->full_name, op->resource[0].start);
 
 	/* The CMOS RTC driver only accepts IORESOURCE_IO, so cons
 	 * up a fake resource so that the probe works for all cases.
@@ -462,10 +463,11 @@ static struct of_device_id __initdata rtc_match[] = {
 };
 
 static struct of_platform_driver rtc_driver = {
-	.match_table	= rtc_match,
 	.probe		= rtc_probe,
-	.driver		= {
-		.name	= "rtc",
+	.driver = {
+		.name = "rtc",
+		.owner = THIS_MODULE,
+		.of_match_table = rtc_match,
 	},
 };
 
@@ -479,7 +481,7 @@ static int __devinit bq4802_probe(struct of_device *op, const struct of_device_i
 {
 
 	printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n",
-	       op->node->full_name, op->resource[0].start);
+	       op->dev.of_node->full_name, op->resource[0].start);
 
 	rtc_bq4802_device.resource = &op->resource[0];
 	return platform_device_register(&rtc_bq4802_device);
@@ -494,10 +496,11 @@ static struct of_device_id __initdata bq4802_match[] = {
 };
 
 static struct of_platform_driver bq4802_driver = {
-	.match_table	= bq4802_match,
 	.probe		= bq4802_probe,
-	.driver		= {
-		.name	= "bq4802",
+	.driver = {
+		.name = "bq4802",
+		.owner = THIS_MODULE,
+		.of_match_table = bq4802_match,
 	},
 };
 
@@ -533,7 +536,7 @@ static struct platform_device m48t59_rtc = {
 
 static int __devinit mostek_probe(struct of_device *op, const struct of_device_id *match)
 {
-	struct device_node *dp = op->node;
+	struct device_node *dp = op->dev.of_node;
 
 	/* On an Enterprise system there can be multiple mostek clocks.
 	 * We should only match the one that is on the central FHC bus.
@@ -557,10 +560,11 @@ static struct of_device_id __initdata mostek_match[] = {
 };
 
 static struct of_platform_driver mostek_driver = {
-	.match_table	= mostek_match,
 	.probe		= mostek_probe,
-	.driver		= {
-		.name	= "mostek",
+	.driver = {
+		.name = "mostek",
+		.owner = THIS_MODULE,
+		.of_match_table = mostek_match,
 	},
 };
 
@@ -717,7 +721,7 @@ static struct clock_event_device sparc64_clockevent = {
 };
 static DEFINE_PER_CPU(struct clock_event_device, sparc64_events);
 
-void timer_interrupt(int irq, struct pt_regs *regs)
+void __irq_entry timer_interrupt(int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	unsigned long tick_mask = tick_ops->softint_mask;
@@ -728,6 +732,7 @@ void timer_interrupt(int irq, struct pt_regs *regs)
 
 	irq_enter();
 
+	local_cpu_data().irq0_irqs++;
 	kstat_incr_irqs_this_cpu(0, irq_to_desc(0));
 
 	if (unlikely(!evt->event_handler)) {
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 10f7bb9..42ad2ba 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -17,6 +17,8 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/kdebug.h>
+#include <linux/ftrace.h>
+#include <linux/gfp.h>
 
 #include <asm/smp.h>
 #include <asm/delay.h>
@@ -2153,6 +2155,9 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 	unsigned long fp, thread_base, ksp;
 	struct thread_info *tp;
 	int count = 0;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	int graph = 0;
+#endif
 
 	ksp = (unsigned long) _ksp;
 	if (!tsk)
@@ -2192,6 +2197,16 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		}
 
 		printk(" [%016lx] %pS\n", pc, (void *) pc);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+		if ((pc + 8UL) == (unsigned long) &return_to_handler) {
+			int index = tsk->curr_ret_stack;
+			if (tsk->ret_stack && index >= graph) {
+				pc = tsk->ret_stack[index - graph].ret;
+				printk(" [%016lx] %pS\n", pc, (void *) pc);
+				graph++;
+			}
+		}
+#endif
 	} while (++count < 16);
 }
 
@@ -2202,27 +2217,6 @@ void dump_stack(void)
 
 EXPORT_SYMBOL(dump_stack);
 
-static inline int is_kernel_stack(struct task_struct *task,
-				  struct reg_window *rw)
-{
-	unsigned long rw_addr = (unsigned long) rw;
-	unsigned long thread_base, thread_end;
-
-	if (rw_addr < PAGE_OFFSET) {
-		if (task != &init_task)
-			return 0;
-	}
-
-	thread_base = (unsigned long) task_stack_page(task);
-	thread_end = thread_base + sizeof(union thread_union);
-	if (rw_addr >= thread_base &&
-	    rw_addr < thread_end &&
-	    !(rw_addr & 0x7UL))
-		return 1;
-
-	return 0;
-}
-
 static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
 {
 	unsigned long fp = rw->ins[6];
@@ -2251,6 +2245,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 	show_regs(regs);
 	add_taint(TAINT_DIE);
 	if (regs->tstate & TSTATE_PRIV) {
+		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw = (struct reg_window *)
 			(regs->u_regs[UREG_FP] + STACK_BIAS);
 
@@ -2258,8 +2253,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		 * find some badly aligned kernel stack.
 		 */
 		while (rw &&
-		       count++ < 30&&
-		       is_kernel_stack(current, rw)) {
+		       count++ < 30 &&
+		       kstack_valid(tp, (unsigned long) rw)) {
 			printk("Caller[%016lx]: %pS\n", rw->ins[7],
 			       (void *) rw->ins[7]);
 
@@ -2548,15 +2543,6 @@ void __init trap_init(void)
 					       rwbuf_stkptrs) ||
 		     TI_GSR != offsetof(struct thread_info, gsr) ||
 		     TI_XFSR != offsetof(struct thread_info, xfsr) ||
-		     TI_USER_CNTD0 != offsetof(struct thread_info,
-					       user_cntd0) ||
-		     TI_USER_CNTD1 != offsetof(struct thread_info,
-					       user_cntd1) ||
-		     TI_KERN_CNTD0 != offsetof(struct thread_info,
-					       kernel_cntd0) ||
-		     TI_KERN_CNTD1 != offsetof(struct thread_info,
-					       kernel_cntd1) ||
-		     TI_PCR != offsetof(struct thread_info, pcr_reg) ||
 		     TI_PRE_COUNT != offsetof(struct thread_info,
 					      preempt_count) ||
 		     TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index 8c91d9b..db15d12 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -191,10 +191,12 @@ tsb_dtlb_load:
 
 tsb_itlb_load:
 	/* Executable bit must be set.  */
-661:	andcc		%g5, _PAGE_EXEC_4U, %g0
-	.section	.sun4v_1insn_patch, "ax"
+661:	sethi		%hi(_PAGE_EXEC_4U), %g4
+	andcc		%g5, %g4, %g0
+	.section	.sun4v_2insn_patch, "ax"
 	.word		661b
 	andcc		%g5, _PAGE_EXEC_4V, %g0
+	nop
 	.previous
 
 	be,pn		%xcc, tsb_do_fault
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index 76d837f..c6dfdaa 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -64,7 +64,7 @@ tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
 tl0_irq6:	BTRAP(0x46)
 #endif
 tl0_irq7:	TRAP_IRQ(deferred_pcr_work_irq, 7)
-#ifdef CONFIG_KGDB
+#if defined(CONFIG_KGDB) && defined(CONFIG_SMP)
 tl0_irq8:	TRAP_IRQ(smp_kgdb_capture_client, 8)
 #else
 tl0_irq8:	BTRAP(0x48)
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index 378ca82..c752c4c 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/perf_event.h>
+#include <linux/ratelimit.h>
 #include <asm/fpumacro.h>
 
 enum direction {
@@ -49,7 +50,7 @@ static inline enum direction decode_direction(unsigned int insn)
 }
 
 /* 16 = double-word, 8 = extra-word, 4 = word, 2 = half-word */
-static inline int decode_access_size(unsigned int insn)
+static inline int decode_access_size(struct pt_regs *regs, unsigned int insn)
 {
 	unsigned int tmp;
 
@@ -65,7 +66,7 @@ static inline int decode_access_size(unsigned int insn)
 		return 2;
 	else {
 		printk("Impossible unaligned trap. insn=%08x\n", insn);
-		die_if_kernel("Byte sized unaligned access?!?!", current_thread_info()->kregs);
+		die_if_kernel("Byte sized unaligned access?!?!", regs);
 
 		/* GCC should never warn that control reaches the end
 		 * of this function without returning a value because
@@ -274,13 +275,9 @@ static void kernel_mna_trap_fault(int fixup_tstate_asi)
 
 static void log_unaligned(struct pt_regs *regs)
 {
-	static unsigned long count, last_time;
+	static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 
-	if (time_after(jiffies, last_time + 5 * HZ))
-		count = 0;
-	if (count < 5) {
-		last_time = jiffies;
-		count++;
+	if (__ratelimit(&ratelimit)) {
 		printk("Kernel unaligned access at TPC[%lx] %pS\n",
 		       regs->tpc, (void *) regs->tpc);
 	}
@@ -289,7 +286,7 @@ static void log_unaligned(struct pt_regs *regs)
 asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 {
 	enum direction dir = decode_direction(insn);
-	int size = decode_access_size(insn);
+	int size = decode_access_size(regs, insn);
 	int orig_asi, asi;
 
 	current_thread_info()->kern_una_regs = regs;
@@ -636,7 +633,6 @@ daex:
 		return;
 	}
 	advance(regs);
-	return;
 }
 
 void handle_stdfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr)
@@ -685,5 +681,4 @@ daex:
 		return;
 	}
 	advance(regs);
-	return;
 }
diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c
index 791c151..8f982b7 100644
--- a/arch/sparc/kernel/us2e_cpufreq.c
+++ b/arch/sparc/kernel/us2e_cpufreq.c
@@ -238,12 +238,12 @@ static unsigned int us2e_freq_get(unsigned int cpu)
 		return 0;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	return clock_tick / estar_to_divisor(estar);
 }
@@ -259,7 +259,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 		return;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	new_bits = index_to_estar_mode(index);
@@ -281,7 +281,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 }
 
 static int us2e_freq_target(struct cpufreq_policy *policy,
diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c
index 365b646..f35d1e7 100644
--- a/arch/sparc/kernel/us3_cpufreq.c
+++ b/arch/sparc/kernel/us3_cpufreq.c
@@ -86,12 +86,12 @@ static unsigned int us3_freq_get(unsigned int cpu)
 		return 0;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	reg = read_safari_cfg();
 	ret = get_current_freq(cpu, reg);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	return ret;
 }
@@ -106,7 +106,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 		return;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	new_freq = sparc64_get_clock_tick(cpu) / 1000;
 	switch (index) {
@@ -140,7 +140,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 }
 
 static int us3_freq_target(struct cpufreq_policy *policy,
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index c28c714..3cb1def 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/init.h>
 
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 4e59925..0c1e678 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -46,11 +46,16 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
 		*(.gnu.warning)
 	} = 0
 	_etext = .;
 
 	RO_DATA(PAGE_SIZE)
+
+	/* Start of data section */
+	_sdata = .;
+
 	.data1 : {
 		*(.data1)
 	}
diff --git a/arch/sparc/lib/mcount.S b/arch/sparc/lib/mcount.S
index 24b8b12..3ad6cbd 100644
--- a/arch/sparc/lib/mcount.S
+++ b/arch/sparc/lib/mcount.S
@@ -7,26 +7,11 @@
 
 #include <linux/linkage.h>
 
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-
 /*
  * This is the main variant and is called by C code.  GCC's -pg option
  * automatically instruments every C function with a call to this.
  */
 
-#ifdef CONFIG_STACK_DEBUG
-
-#define OVSTACKSIZE	4096		/* lets hope this is enough */
-
-	.data
-	.align		8
-panicstring:
-	.asciz		"Stack overflow\n"
-	.align		8
-ovstack:
-	.skip		OVSTACKSIZE
-#endif
 	.text
 	.align		32
 	.globl		_mcount
@@ -35,84 +20,48 @@ ovstack:
 	.type		mcount,#function
 _mcount:
 mcount:
-#ifdef CONFIG_STACK_DEBUG
-	/*
-	 * Check whether %sp is dangerously low.
-	 */
-	ldub		[%g6 + TI_FPDEPTH], %g1
-	srl		%g1, 1, %g3
-	add		%g3, 1, %g3
-	sllx		%g3, 8, %g3			! each fpregs frame is 256b
-	add		%g3, 192, %g3
-	add		%g6, %g3, %g3			! where does task_struct+frame end?
-	sub		%g3, STACK_BIAS, %g3
-	cmp		%sp, %g3
-	bg,pt		%xcc, 1f
-	 nop
-	lduh		[%g6 + TI_CPU], %g1
-	sethi		%hi(hardirq_stack), %g3
-	or		%g3, %lo(hardirq_stack), %g3
-	sllx		%g1, 3, %g1
-	ldx		[%g3 + %g1], %g7
-	sub		%g7, STACK_BIAS, %g7
-	cmp		%sp, %g7
-	bleu,pt		%xcc, 2f
-	 sethi		%hi(THREAD_SIZE), %g3
-	add		%g7, %g3, %g7
-	cmp		%sp, %g7
-	blu,pn		%xcc, 1f
-2:	 sethi		%hi(softirq_stack), %g3
-	or		%g3, %lo(softirq_stack), %g3
-	ldx		[%g3 + %g1], %g7
-	sub		%g7, STACK_BIAS, %g7
-	cmp		%sp, %g7
-	bleu,pt		%xcc, 3f
-	 sethi		%hi(THREAD_SIZE), %g3
-	add		%g7, %g3, %g7
-	cmp		%sp, %g7
-	blu,pn		%xcc, 1f
-	 nop
-	/* If we are already on ovstack, don't hop onto it
-	 * again, we are already trying to output the stack overflow
-	 * message.
-	 */
-3:	sethi		%hi(ovstack), %g7		! cant move to panic stack fast enough
-	 or		%g7, %lo(ovstack), %g7
-	add		%g7, OVSTACKSIZE, %g3
-	sub		%g3, STACK_BIAS + 192, %g3
-	sub		%g7, STACK_BIAS, %g7
-	cmp		%sp, %g7
-	blu,pn		%xcc, 2f
-	 cmp		%sp, %g3
-	bleu,pn		%xcc, 1f
-	 nop
-2:	mov		%g3, %sp
-	sethi		%hi(panicstring), %g3
-	call		prom_printf
-	 or		%g3, %lo(panicstring), %o0
-	call		prom_halt
-	 nop
-1:
-#endif
 #ifdef CONFIG_FUNCTION_TRACER
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov		%o7, %o0
-	.globl		mcount_call
-mcount_call:
-	call		ftrace_stub
-	 mov		%o0, %o7
+	/* Do nothing, the retl/nop below is all we need.  */
 #else
-	sethi		%hi(ftrace_trace_function), %g1
+	sethi		%hi(function_trace_stop), %g1
+	lduw		[%g1 + %lo(function_trace_stop)], %g2
+	brnz,pn		%g2, 2f
+	 sethi		%hi(ftrace_trace_function), %g1
 	sethi		%hi(ftrace_stub), %g2
 	ldx		[%g1 + %lo(ftrace_trace_function)], %g1
 	or		%g2, %lo(ftrace_stub), %g2
 	cmp		%g1, %g2
 	be,pn		%icc, 1f
-	 mov		%i7, %o1
-	jmpl		%g1, %g0
-	 mov		%o7, %o0
+	 mov		%i7, %g3
+	save		%sp, -176, %sp
+	mov		%g3, %o1
+	jmpl		%g1, %o7
+	 mov		%i7, %o0
+	ret
+	 restore
 	/* not reached */
 1:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	sethi		%hi(ftrace_graph_return), %g1
+	ldx		[%g1 + %lo(ftrace_graph_return)], %g3
+	cmp		%g2, %g3
+	bne,pn		%xcc, 5f
+	 sethi		%hi(ftrace_graph_entry_stub), %g2
+	sethi		%hi(ftrace_graph_entry), %g1
+	or		%g2, %lo(ftrace_graph_entry_stub), %g2
+	ldx		[%g1 + %lo(ftrace_graph_entry)], %g1
+	cmp		%g1, %g2
+	be,pt		%xcc, 2f
+	 nop
+5:	mov		%i7, %g2
+	mov		%fp, %g3
+	save		%sp, -176, %sp
+	mov		%g2, %l0
+	ba,pt		%xcc, ftrace_graph_caller
+	 mov		%g3, %l1
+#endif
+2:
 #endif
 #endif
 	retl
@@ -131,14 +80,50 @@ ftrace_stub:
 	.globl		ftrace_caller
 	.type		ftrace_caller,#function
 ftrace_caller:
-	mov		%i7, %o1
-	mov		%o7, %o0
+	sethi		%hi(function_trace_stop), %g1
+	mov		%i7, %g2
+	lduw		[%g1 + %lo(function_trace_stop)], %g1
+	brnz,pn		%g1, ftrace_stub
+	 mov		%fp, %g3
+	save		%sp, -176, %sp
+	mov		%g2, %o1
+	mov		%g2, %l0
+	mov		%g3, %l1
 	.globl		ftrace_call
 ftrace_call:
 	call		ftrace_stub
-	 mov		%o0, %o7
-	retl
+	 mov		%i7, %o0
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl		ftrace_graph_call
+ftrace_graph_call:
+	call		ftrace_stub
 	 nop
+#endif
+	ret
+	 restore
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.size		ftrace_graph_call,.-ftrace_graph_call
+#endif
+	.size		ftrace_call,.-ftrace_call
 	.size		ftrace_caller,.-ftrace_caller
 #endif
 #endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+	mov		%l0, %o0
+	mov		%i7, %o1
+	call		prepare_ftrace_return
+	 mov		%l1, %o2
+	ret
+	 restore	%o0, -8, %i7
+END(ftrace_graph_caller)
+
+ENTRY(return_to_handler)
+	save		%sp, -176, %sp
+	call		ftrace_return_to_handler
+	 mov		%fp, %o0
+	jmpl		%o0 + 8, %g0
+	 restore
+END(return_to_handler)
+#endif
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index a3413ac..bd86016 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -35,6 +35,8 @@
 
 extern int prom_node_root;
 
+int show_unhandled_signals = 1;
+
 /* At boot time we determine these two values necessary for setting
  * up the segment maps and page table entries (pte's).
  */
@@ -149,6 +151,45 @@ asmlinkage int lookup_fault(unsigned long pc, unsigned long ret_pc,
 	return 0;
 }
 
+static inline void
+show_signal_msg(struct pt_regs *regs, int sig, int code,
+		unsigned long address, struct task_struct *tsk)
+{
+	if (!unhandled_signal(tsk, sig))
+		return;
+
+	if (!printk_ratelimit())
+		return;
+
+	printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+	       task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+	       tsk->comm, task_pid_nr(tsk), address,
+	       (void *)regs->pc, (void *)regs->u_regs[UREG_I7],
+	       (void *)regs->u_regs[UREG_FP], code);
+
+	print_vma_addr(KERN_CONT " in ", regs->pc);
+
+	printk(KERN_CONT "\n");
+}
+
+static void __do_fault_siginfo(int code, int sig, struct pt_regs *regs,
+			       unsigned long addr)
+{
+	siginfo_t info;
+
+	info.si_signo = sig;
+	info.si_code = code;
+	info.si_errno = 0;
+	info.si_addr = (void __user *) addr;
+	info.si_trapno = 0;
+
+	if (unlikely(show_unhandled_signals))
+		show_signal_msg(regs, sig, info.si_code,
+				addr, current);
+
+	force_sig_info (sig, &info, current);
+}
+
 extern unsigned long safe_compute_effective_address(struct pt_regs *,
 						    unsigned int);
 
@@ -168,6 +209,14 @@ static unsigned long compute_si_addr(struct pt_regs *regs, int text_fault)
 	return safe_compute_effective_address(regs, insn);
 }
 
+static noinline void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
+				      int text_fault)
+{
+	unsigned long addr = compute_si_addr(regs, text_fault);
+
+	__do_fault_siginfo(code, sig, regs, addr);
+}
+
 asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 			       unsigned long address)
 {
@@ -176,9 +225,8 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	struct mm_struct *mm = tsk->mm;
 	unsigned int fixup;
 	unsigned long g2;
-	siginfo_t info;
 	int from_user = !(regs->psr & PSR_PS);
-	int fault;
+	int fault, code;
 
 	if(text_fault)
 		address = regs->pc;
@@ -195,7 +243,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	if (!ARCH_SUN4C && address >= TASK_SIZE)
 		goto vmalloc_fault;
 
-	info.si_code = SEGV_MAPERR;
+	code = SEGV_MAPERR;
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -229,7 +277,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	 * we can handle it..
 	 */
 good_area:
-	info.si_code = SEGV_ACCERR;
+	code = SEGV_ACCERR;
 	if(write) {
 		if(!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
@@ -273,18 +321,8 @@ bad_area:
 
 bad_area_nosemaphore:
 	/* User mode accesses just cause a SIGSEGV */
-	if(from_user) {
-#if 0
-		printk("Fault whee %s [%d]: segfaults at %08lx pc=%08lx\n",
-		       tsk->comm, tsk->pid, address, regs->pc);
-#endif
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		/* info.si_code set above to make clear whether
-		   this was a SEGV_MAPERR or SEGV_ACCERR fault.  */
-		info.si_addr = (void __user *)compute_si_addr(regs, text_fault);
-		info.si_trapno = 0;
-		force_sig_info (SIGSEGV, &info, tsk);
+	if (from_user) {
+		do_fault_siginfo(code, SIGSEGV, regs, text_fault);
 		return;
 	}
 
@@ -335,12 +373,7 @@ out_of_memory:
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *) compute_si_addr(regs, text_fault);
-	info.si_trapno = 0;
-	force_sig_info (SIGBUS, &info, tsk);
+	do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, text_fault);
 	if (!from_user)
 		goto no_context;
 
@@ -378,7 +411,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 			       unsigned long address)
 {
 	extern void sun4c_update_mmu_cache(struct vm_area_struct *,
-					   unsigned long,pte_t);
+					   unsigned long,pte_t *);
 	extern pte_t *sun4c_pte_offset_kernel(pmd_t *,unsigned long);
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
@@ -455,7 +488,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 		 *       on the CPU and doing a shrink_mmap() on this vma.
 		 */
 		sun4c_update_mmu_cache (find_vma(current->mm, address), address,
-					*ptep);
+					ptep);
 	else
 		do_sparc_fault(regs, text_fault, write, address);
 }
@@ -466,14 +499,10 @@ static void force_user_fault(unsigned long address, int write)
 	struct vm_area_struct *vma;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	siginfo_t info;
+	int code;
 
-	info.si_code = SEGV_MAPERR;
+	code = SEGV_MAPERR;
 
-#if 0
-	printk("wf<pid=%d,wr=%d,addr=%08lx>\n",
-	       tsk->pid, write, address);
-#endif
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if(!vma)
@@ -485,7 +514,7 @@ static void force_user_fault(unsigned long address, int write)
 	if(expand_stack(vma, address))
 		goto bad_area;
 good_area:
-	info.si_code = SEGV_ACCERR;
+	code = SEGV_ACCERR;
 	if(write) {
 		if(!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
@@ -502,27 +531,12 @@ good_area:
 	return;
 bad_area:
 	up_read(&mm->mmap_sem);
-#if 0
-	printk("Window whee %s [%d]: segfaults at %08lx\n",
-	       tsk->comm, tsk->pid, address);
-#endif
-	info.si_signo = SIGSEGV;
-	info.si_errno = 0;
-	/* info.si_code set above to make clear whether
-	   this was a SEGV_MAPERR or SEGV_ACCERR fault.  */
-	info.si_addr = (void __user *) address;
-	info.si_trapno = 0;
-	force_sig_info (SIGSEGV, &info, tsk);
+	__do_fault_siginfo(code, SIGSEGV, tsk->thread.kregs, address);
 	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *) address;
-	info.si_trapno = 0;
-	force_sig_info (SIGBUS, &info, tsk);
+	__do_fault_siginfo(BUS_ADRERR, SIGBUS, tsk->thread.kregs, address);
 }
 
 void window_overflow_fault(void)
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index b9d4ff0..f92ce56 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -32,6 +32,8 @@
 #include <asm/sections.h>
 #include <asm/mmu_context.h>
 
+int show_unhandled_signals = 1;
+
 static inline __kprobes int notify_page_fault(struct pt_regs *regs)
 {
 	int ret = 0;
@@ -128,22 +130,48 @@ outret:
 	return insn;
 }
 
+static inline void
+show_signal_msg(struct pt_regs *regs, int sig, int code,
+		unsigned long address, struct task_struct *tsk)
+{
+	if (!unhandled_signal(tsk, sig))
+		return;
+
+	if (!printk_ratelimit())
+		return;
+
+	printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
+	       task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
+	       tsk->comm, task_pid_nr(tsk), address,
+	       (void *)regs->tpc, (void *)regs->u_regs[UREG_I7],
+	       (void *)regs->u_regs[UREG_FP], code);
+
+	print_vma_addr(KERN_CONT " in ", regs->tpc);
+
+	printk(KERN_CONT "\n");
+}
+
 extern unsigned long compute_effective_address(struct pt_regs *, unsigned int, unsigned int);
 
 static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
 			     unsigned int insn, int fault_code)
 {
+	unsigned long addr;
 	siginfo_t info;
 
 	info.si_code = code;
 	info.si_signo = sig;
 	info.si_errno = 0;
 	if (fault_code & FAULT_CODE_ITLB)
-		info.si_addr = (void __user *) regs->tpc;
+		addr = regs->tpc;
 	else
-		info.si_addr = (void __user *)
-			compute_effective_address(regs, insn, 0);
+		addr = compute_effective_address(regs, insn, 0);
+	info.si_addr = (void __user *) addr;
 	info.si_trapno = 0;
+
+	if (unlikely(show_unhandled_signals))
+		show_signal_msg(regs, sig, code, addr, current);
+
 	force_sig_info(sig, &info, current);
 }
 
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index f27d103..5fdddf1 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -10,7 +10,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 
 #include <asm/mman.h>
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index dc7c3b1..6d0e02c 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -24,6 +24,7 @@
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
 #include <linux/poison.h>
+#include <linux/gfp.h>
 
 #include <asm/sections.h>
 #include <asm/system.h>
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1886d37..f043451 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -13,7 +13,6 @@
 #include <linux/bootmem.h>
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
-#include <linux/slab.h>
 #include <linux/initrd.h>
 #include <linux/swap.h>
 #include <linux/pagemap.h>
@@ -24,8 +23,9 @@
 #include <linux/cache.h>
 #include <linux/sort.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mmzone.h>
+#include <linux/gfp.h>
 
 #include <asm/head.h>
 #include <asm/system.h>
@@ -289,12 +289,13 @@ static void flush_dcache(unsigned long pfn)
 	}
 }
 
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
 	struct mm_struct *mm;
 	struct tsb *tsb;
 	unsigned long tag, flags;
 	unsigned long tsb_index, tsb_hash_shift;
+	pte_t pte = *ptep;
 
 	if (tlb_type != hypervisor) {
 		unsigned long pfn = pte_pfn(pte);
@@ -725,7 +726,7 @@ static void __init find_ramdisk(unsigned long phys_base)
 		initrd_start = ramdisk_image;
 		initrd_end = ramdisk_image + sparc_ramdisk_size;
 
-		lmb_reserve(initrd_start, sparc_ramdisk_size);
+		memblock_reserve(initrd_start, sparc_ramdisk_size);
 
 		initrd_start += PAGE_OFFSET;
 		initrd_end += PAGE_OFFSET;
@@ -821,7 +822,7 @@ static void __init allocate_node_data(int nid)
 	struct pglist_data *p;
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	paddr = lmb_alloc_nid(sizeof(struct pglist_data),
+	paddr = memblock_alloc_nid(sizeof(struct pglist_data),
 			      SMP_CACHE_BYTES, nid, nid_range);
 	if (!paddr) {
 		prom_printf("Cannot allocate pglist_data for nid[%d]\n", nid);
@@ -842,7 +843,7 @@ static void __init allocate_node_data(int nid)
 	if (p->node_spanned_pages) {
 		num_pages = bootmem_bootmap_pages(p->node_spanned_pages);
 
-		paddr = lmb_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
+		paddr = memblock_alloc_nid(num_pages << PAGE_SHIFT, PAGE_SIZE, nid,
 				      nid_range);
 		if (!paddr) {
 			prom_printf("Cannot allocate bootmap for nid[%d]\n",
@@ -973,11 +974,11 @@ static void __init add_node_ranges(void)
 {
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start, end;
 
-		start = lmb.memory.region[i].base;
+		start = memblock.memory.region[i].base;
 		end = start + size;
 		while (start < end) {
 			unsigned long this_end;
@@ -1009,7 +1010,7 @@ static int __init grab_mlgroups(struct mdesc_handle *md)
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mlgroup),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mlgroup),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1050,7 +1051,7 @@ static int __init grab_mblocks(struct mdesc_handle *md)
 	if (!count)
 		return -ENOENT;
 
-	paddr = lmb_alloc(count * sizeof(struct mdesc_mblock),
+	paddr = memblock_alloc(count * sizeof(struct mdesc_mblock),
 			  SMP_CACHE_BYTES);
 	if (!paddr)
 		return -ENOMEM;
@@ -1278,8 +1279,8 @@ static int bootmem_init_numa(void)
 
 static void __init bootmem_init_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned int i;
 
 	numadbg("bootmem_init_nonnuma()\n");
@@ -1291,15 +1292,15 @@ static void __init bootmem_init_nonnuma(void)
 
 	init_node_masks_nonnuma();
 
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long size = lmb_size_bytes(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		unsigned long size = memblock_size_bytes(&memblock.memory, i);
 		unsigned long start_pfn, end_pfn;
 
 		if (!size)
 			continue;
 
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -1337,9 +1338,9 @@ static void __init trim_reserved_in_node(int nid)
 
 	numadbg("  trim_reserved_in_node(%d)\n", nid);
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long start = lmb.reserved.region[i].base;
-		unsigned long size = lmb_size_bytes(&lmb.reserved, i);
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long start = memblock.reserved.region[i].base;
+		unsigned long size = memblock_size_bytes(&memblock.reserved, i);
 		unsigned long end = start + size;
 
 		reserve_range_in_node(nid, start, end);
@@ -1383,7 +1384,7 @@ static unsigned long __init bootmem_init(unsigned long phys_base)
 	unsigned long end_pfn;
 	int nid;
 
-	end_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	end_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn = end_pfn;
 	min_low_pfn = (phys_base >> PAGE_SHIFT);
 
@@ -1733,7 +1734,7 @@ void __init paging_init(void)
 		sun4v_ktsb_init();
 	}
 
-	lmb_init();
+	memblock_init();
 
 	/* Find available physical memory...
 	 *
@@ -1751,17 +1752,17 @@ void __init paging_init(void)
 	phys_base = 0xffffffffffffffffUL;
 	for (i = 0; i < pavail_ents; i++) {
 		phys_base = min(phys_base, pavail[i].phys_addr);
-		lmb_add(pavail[i].phys_addr, pavail[i].reg_size);
+		memblock_add(pavail[i].phys_addr, pavail[i].reg_size);
 	}
 
-	lmb_reserve(kern_base, kern_size);
+	memblock_reserve(kern_base, kern_size);
 
 	find_ramdisk(phys_base);
 
-	lmb_enforce_memory_limit(cmdline_memory_size);
+	memblock_enforce_memory_limit(cmdline_memory_size);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
 	set_bit(0, mmu_context_bmap);
 
@@ -1815,8 +1816,8 @@ void __init paging_init(void)
 	 */
 	for_each_possible_cpu(i) {
 		/* XXX Use node local allocations... XXX */
-		softirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
-		hardirq_stack[i] = __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		softirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
+		hardirq_stack[i] = __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 
 	/* Setup bootmem... */
@@ -2116,7 +2117,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node)
 			       "node=%d entry=%lu/%lu\n", start, block, nr,
 			       node,
 			       addr >> VMEMMAP_CHUNK_SHIFT,
-			       VMEMMAP_SIZE >> VMEMMAP_CHUNK_SHIFT);
+			       VMEMMAP_SIZE);
 		}
 	}
 	return 0;
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index 196263f..4e62c27 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -62,7 +62,7 @@ pte_t *sun4c_pte_offset_kernel(pmd_t *dir, unsigned long address)
 	return NULL;
 }
 
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
 }
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 367321a..b0b43aa 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -10,7 +10,6 @@
 
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
 #include <linux/init.h>
@@ -20,6 +19,7 @@
 #include <linux/seq_file.h>
 #include <linux/kdebug.h>
 #include <linux/log2.h>
+#include <linux/gfp.h>
 
 #include <asm/bitext.h>
 #include <asm/page.h>
@@ -694,7 +694,7 @@ extern void tsunami_setup_blockops(void);
  * The following code is a deadwood that may be necessary when
  * we start to make precise page flushes again. --zaitcev
  */
-static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte)
+static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t *ptep)
 {
 #if 0
 	static unsigned long last;
@@ -703,10 +703,10 @@ static void swift_update_mmu_cache(struct vm_area_struct * vma, unsigned long ad
 
 	if (address == last) {
 		val = srmmu_hwprobe(address);
-		if (val != 0 && pte_val(pte) != val) {
+		if (val != 0 && pte_val(*ptep) != val) {
 			printk("swift_update_mmu_cache: "
 			    "addr %lx put %08x probed %08x from %p\n",
-			    address, pte_val(pte), val,
+			    address, pte_val(*ptep), val,
 			    __builtin_return_address(0));
 			srmmu_flush_whole_tlb();
 		}
@@ -2215,8 +2215,6 @@ void __init ld_mmu_srmmu(void)
 	BTFIXUPSET_CALL(pmd_page, srmmu_pmd_page, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pgd_page_vaddr, srmmu_pgd_page, BTFIXUPCALL_NORM);
 
-	BTFIXUPSET_SETHI(none_mask, 0xF0000000);
-
 	BTFIXUPSET_CALL(pte_present, srmmu_pte_present, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(pte_clear, srmmu_pte_clear, BTFIXUPCALL_SWAPO0G0);
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a89baf0..4289f90 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/highmem.h>
 #include <linux/fs.h>
@@ -1887,7 +1888,7 @@ static void sun4c_check_pgt_cache(int low, int high)
 /* An experiment, turn off by default for now... -DaveM */
 #define SUN4C_PRELOAD_PSEG
 
-void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
 	unsigned long flags;
 	int pseg;
@@ -1929,7 +1930,7 @@ void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, p
 			start += PAGE_SIZE;
 		}
 #ifndef SUN4C_PRELOAD_PSEG
-		sun4c_put_pte(address, pte_val(pte));
+		sun4c_put_pte(address, pte_val(*ptep));
 #endif
 		local_irq_restore(flags);
 		return;
@@ -1940,7 +1941,7 @@ void sun4c_update_mmu_cache(struct vm_area_struct *vma, unsigned long address, p
 		add_lru(entry);
 	}
 
-	sun4c_put_pte(address, pte_val(pte));
+	sun4c_put_pte(address, pte_val(*ptep));
 	local_irq_restore(flags);
 }
 
@@ -2086,9 +2087,6 @@ void __init ld_mmu_sun4c(void)
 
 	BTFIXUPSET_CALL(set_pte, sun4c_set_pte, BTFIXUPCALL_STO1O0);
 
-	/* The 2.4.18 code does not set this on sun4c, how does it work? XXX */
-	/* BTFIXUPSET_SETHI(none_mask, 0x00000000); */	/* Defaults to zero? */
-
 	BTFIXUPSET_CALL(pte_pfn, sun4c_pte_pfn, BTFIXUPCALL_NORM);
 #if 0 /* PAGE_SHIFT <= 12 */ /* Eek. Investigate. XXX */
 	BTFIXUPSET_CALL(pmd_page, sun4c_pmd_page, BTFIXUPCALL_ANDNINT(PAGE_SIZE - 1));
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 36a0813..101d7c8 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -5,6 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/preempt.h>
+#include <linux/slab.h>
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index b3075d7..5340264 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -94,5 +94,4 @@ void
 prom_putchar(char c)
 {
 	while(prom_nbputchar(c) == -1) ;
-	return;
 }
diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c
index e1c3fc8..f55d58a 100644
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@@ -62,7 +62,6 @@ void
 prom_putchar(char c)
 {
 	prom_nbputchar(c);
-	return;
 }
 
 void
diff --git a/arch/sparc/prom/devmap.c b/arch/sparc/prom/devmap.c
index 1e51791..46157d2 100644
--- a/arch/sparc/prom/devmap.c
+++ b/arch/sparc/prom/devmap.c
@@ -50,5 +50,4 @@ prom_unmapio(char *vaddr, unsigned int num_bytes)
 	(*(romvec->pv_v2devops.v2_dumb_munmap))(vaddr, num_bytes);
 	restore_current();
 	spin_unlock_irqrestore(&prom_lock, flags);
-	return;
 }
diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c
index 9f1a95c..9c5d468 100644
--- a/arch/sparc/prom/devops_32.c
+++ b/arch/sparc/prom/devops_32.c
@@ -84,6 +84,4 @@ prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
 	};
 	restore_current();
 	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return;
 }
diff --git a/arch/sparc/prom/init_32.c b/arch/sparc/prom/init_32.c
index 6193c33..ccb36c7 100644
--- a/arch/sparc/prom/init_32.c
+++ b/arch/sparc/prom/init_32.c
@@ -75,5 +75,4 @@ void __init prom_init(struct linux_romvec *rp)
 	       romvec->pv_romvers, prom_rev);
 
 	/* Initialization successful. */
-	return;
 }
diff --git a/arch/sparc/prom/p1275.c b/arch/sparc/prom/p1275.c
index 4b7c937..2d8b70d 100644
--- a/arch/sparc/prom/p1275.c
+++ b/arch/sparc/prom/p1275.c
@@ -32,10 +32,9 @@ extern void prom_cif_interface(void);
 extern void prom_cif_callback(void);
 
 /*
- * This provides SMP safety on the p1275buf. prom_callback() drops this lock
- * to allow recursuve acquisition.
+ * This provides SMP safety on the p1275buf.
  */
-DEFINE_SPINLOCK(prom_entry_lock);
+DEFINE_RAW_SPINLOCK(prom_entry_lock);
 
 long p1275_cmd(const char *service, long fmt, ...)
 {
@@ -47,7 +46,9 @@ long p1275_cmd(const char *service, long fmt, ...)
 	
 	p = p1275buf.prom_buffer;
 
-	spin_lock_irqsave(&prom_entry_lock, flags);
+	raw_local_save_flags(flags);
+	raw_local_irq_restore(PIL_NMI);
+	raw_spin_lock(&prom_entry_lock);
 
 	p1275buf.prom_args[0] = (unsigned long)p;		/* service */
 	strcpy (p, service);
@@ -139,7 +140,8 @@ long p1275_cmd(const char *service, long fmt, ...)
 	va_end(list);
 	x = p1275buf.prom_args [nargs + 3];
 
-	spin_unlock_irqrestore(&prom_entry_lock, flags);
+	raw_spin_unlock(&prom_entry_lock);
+	raw_local_irq_restore(flags);
 
 	return x;
 }
diff --git a/arch/sparc/prom/palloc.c b/arch/sparc/prom/palloc.c
index 20be339..2e2a88b 100644
--- a/arch/sparc/prom/palloc.c
+++ b/arch/sparc/prom/palloc.c
@@ -40,5 +40,4 @@ prom_free(char *vaddr, unsigned int num_bytes)
 {
 	if((prom_vers == PROM_V0) || (num_bytes == 0x0)) return;
 	(*(romvec->pv_v2devops.v2_dumb_mem_free))(vaddr, num_bytes);
-	return;
 }
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index cd57908..aeff43e 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -87,8 +87,6 @@ void __init prom_ranges_init(void)
 
 	if(num_obio_ranges)
 		prom_printf("PROMLIB: obio_ranges %d\n", num_obio_ranges);
-
-	return;
 }
 
 void
diff --git a/arch/sparc/prom/segment.c b/arch/sparc/prom/segment.c
index 04fd03a..86a663f 100644
--- a/arch/sparc/prom/segment.c
+++ b/arch/sparc/prom/segment.c
@@ -25,5 +25,4 @@ prom_putsegment(int ctx, unsigned long vaddr, int segment)
 	(*(romvec->pv_setctxt))(ctx, (char *) vaddr, segment);
 	restore_current();
 	spin_unlock_irqrestore(&prom_lock, flags);
-	return;
 }
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 646d244..b21592f 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -173,7 +173,6 @@ void prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
 	len = prom_getproperty(node, prop, user_buf, ubuf_size);
 	if(len != -1) return;
 	user_buf[0] = 0;
-	return;
 }
 EXPORT_SYMBOL(prom_getstring);
 
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 8ea73dd..3c0d2dd 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -154,7 +154,6 @@ void prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
 	len = prom_getproperty(node, prop, user_buf, ubuf_size);
 	if(len != -1) return;
 	user_buf[0] = 0;
-	return;
 }
 EXPORT_SYMBOL(prom_getstring);
 
diff --git a/arch/um/.gitignore b/arch/um/.gitignore
new file mode 100644
index 0000000..a73d3a1
--- /dev/null
+++ b/arch/um/.gitignore
@@ -0,0 +1,3 @@
+kernel/config.c
+kernel/config.tmp
+kernel/vmlinux.lds
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index d332503..cfcac1f 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -124,8 +124,8 @@ static ssize_t harddog_write(struct file *file, const char __user *data, size_t
 	return 0;
 }
 
-static int harddog_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static int harddog_ioctl_unlocked(struct file *file,
+				  unsigned int cmd, unsigned long arg)
 {
 	void __user *argp= (void __user *)arg;
 	static struct watchdog_info ident = {
@@ -148,10 +148,22 @@ static int harddog_ioctl(struct inode *inode, struct file *file,
 	}
 }
 
+static long harddog_ioctl(struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	lock_kernel();
+	ret = harddog_ioctl_unlocked(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static const struct file_operations harddog_fops = {
 	.owner		= THIS_MODULE,
 	.write		= harddog_write,
-	.ioctl		= harddog_ioctl,
+	.unlocked_ioctl	= harddog_ioctl,
 	.open		= harddog_open,
 	.release	= harddog_release,
 };
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index 368219c..ae42695 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -136,7 +136,7 @@ static unsigned int hostaudio_poll(struct file *file,
 	return mask;
 }
 
-static int hostaudio_ioctl(struct inode *inode, struct file *file,
+static long hostaudio_ioctl(struct file *file,
 			   unsigned int cmd, unsigned long arg)
 {
 	struct hostaudio_state *state = file->private_data;
@@ -223,7 +223,7 @@ static int hostaudio_release(struct inode *inode, struct file *file)
 
 /* /dev/mixer file operations */
 
-static int hostmixer_ioctl_mixdev(struct inode *inode, struct file *file,
+static long hostmixer_ioctl_mixdev(struct file *file,
 				  unsigned int cmd, unsigned long arg)
 {
 	struct hostmixer_state *state = file->private_data;
@@ -289,7 +289,7 @@ static const struct file_operations hostaudio_fops = {
 	.read           = hostaudio_read,
 	.write          = hostaudio_write,
 	.poll           = hostaudio_poll,
-	.ioctl          = hostaudio_ioctl,
+	.unlocked_ioctl	= hostaudio_ioctl,
 	.mmap           = NULL,
 	.open           = hostaudio_open,
 	.release        = hostaudio_release,
@@ -298,7 +298,7 @@ static const struct file_operations hostaudio_fops = {
 static const struct file_operations hostmixer_fops = {
 	.owner          = THIS_MODULE,
 	.llseek         = no_llseek,
-	.ioctl          = hostmixer_ioctl_mixdev,
+	.unlocked_ioctl	= hostmixer_ioctl_mixdev,
 	.open           = hostmixer_open_mixdev,
 	.release        = hostmixer_release,
 };
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index cf8a97f..7f7338c 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -6,6 +6,7 @@
 #include "linux/irqreturn.h"
 #include "linux/kd.h"
 #include "linux/sched.h"
+#include "linux/slab.h"
 #include "chan_kern.h"
 #include "irq_kern.h"
 #include "irq_user.h"
@@ -18,10 +19,9 @@ static irqreturn_t line_interrupt(int irq, void *data)
 {
 	struct chan *chan = data;
 	struct line *line = chan->line;
-	struct tty_struct *tty = line->tty;
 
 	if (line)
-		chan_interrupt(&line->chan_list, &line->task, tty, irq);
+		chan_interrupt(&line->chan_list, &line->task, line->tty, irq);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 3b3c366..de317d0 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -140,7 +140,7 @@ void mconsole_proc(struct mc_request *req)
 		goto out;
 	}
 
-	err = may_open(&nd.path, MAY_READ, FMODE_READ);
+	err = may_open(&nd.path, MAY_READ, O_RDONLY);
 	if (result) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
 		path_put(&nd.path);
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index d22f9e5..7158393 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -46,8 +46,7 @@ static ssize_t mmapper_write(struct file *file, const char __user *buf,
 	return count;
 }
 
-static int mmapper_ioctl(struct inode *inode, struct file *file,
-			 unsigned int cmd, unsigned long arg)
+static long mmapper_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	return -ENOIOCTLCMD;
 }
@@ -90,7 +89,7 @@ static const struct file_operations mmapper_fops = {
 	.owner		= THIS_MODULE,
 	.read		= mmapper_read,
 	.write		= mmapper_write,
-	.ioctl		= mmapper_ioctl,
+	.unlocked_ioctl	= mmapper_ioctl,
 	.mmap		= mmapper_mmap,
 	.open		= mmapper_open,
 	.release	= mmapper_release,
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index a74245a..f053726 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/rtnetlink.h>
 #include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include "init.h"
 #include "irq_kern.h"
diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c
index 4ebc8a3..a11573b 100644
--- a/arch/um/drivers/port_kern.c
+++ b/arch/um/drivers/port_kern.c
@@ -7,6 +7,7 @@
 #include "linux/interrupt.h"
 #include "linux/list.h"
 #include "linux/mutex.h"
+#include "linux/slab.h"
 #include "linux/workqueue.h"
 #include "asm/atomic.h"
 #include "init.h"
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5ff5546..da992a3 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -31,6 +31,7 @@
 #include "linux/ctype.h"
 #include "linux/capability.h"
 #include "linux/mm.h"
+#include "linux/slab.h"
 #include "linux/vmalloc.h"
 #include "linux/blkpg.h"
 #include "linux/genhd.h"
@@ -747,7 +748,7 @@ static int ubd_open_dev(struct ubd *ubd_dev)
 	ubd_dev->fd = fd;
 
 	if(ubd_dev->cow.file != NULL){
-		blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
+		blk_queue_max_hw_sectors(ubd_dev->queue, 8 * sizeof(long));
 
 		err = -ENOMEM;
 		ubd_dev->cow.bitmap = vmalloc(ubd_dev->cow.bitmap_len);
@@ -849,7 +850,7 @@ static int ubd_add(int n, char **error_out)
 	}
 	ubd_dev->queue->queuedata = ubd_dev;
 
-	blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
+	blk_queue_max_segments(ubd_dev->queue, MAX_SG);
 	err = ubd_disk_register(UBD_MAJOR, ubd_dev->size, n, &ubd_gendisk[n]);
 	if(err){
 		*error_out = "Failed to register device";
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/um/include/asm/arch_hweight.h
new file mode 100644
index 0000000..c656cf4
--- /dev/null
+++ b/arch/um/include/asm/arch_hweight.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_UM_HWEIGHT_H
+#define _ASM_UM_HWEIGHT_H
+
+#include <asm-generic/bitops/arch_hweight.h>
+
+#endif
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 378de4b..b948c14 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -104,14 +104,6 @@ dma_get_cache_alignment(void)
 }
 
 static inline void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 {
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 9ce3f16..a9f7251 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -345,7 +345,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 struct mm_struct;
 extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
 
-#define update_mmu_cache(vma,address,pte) do ; while (0)
+#define update_mmu_cache(vma,address,ptep) do ; while (0)
 
 /* Encode and de-code a swap entry */
 #define __swp_type(x)			(((x).val >> 4) & 0x3f)
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 6c88990..2cd899f 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -16,6 +16,8 @@ struct pt_regs {
 	struct uml_pt_regs regs;
 };
 
+#define arch_has_single_step()	(1)
+
 #define EMPTY_REGS { .regs = EMPTY_UML_PT_REGS }
 
 #define PT_REGS_IP(r) UPT_IP(&(r)->regs)
diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h
index 753346e..93af1cf 100644
--- a/arch/um/include/asm/system.h
+++ b/arch/um/include/asm/system.h
@@ -3,11 +3,8 @@
 
 #include "sysdep/system.h"
 
-extern void *switch_to(void *prev, void *next, void *last);
-
 extern int get_signals(void);
 extern int set_signals(int enable);
-extern int get_signals(void);
 extern void block_signals(void);
 extern void unblock_signals(void);
 
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index fd911f8..e2cf786bd 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -63,10 +63,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SIGPENDING		1	/* signal pending */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
-					 * TIF_NEED_RESCHED
-					 */
-#define TIF_RESTART_BLOCK 	4
-#define TIF_MEMDIE	 	5
+					 * TIF_NEED_RESCHED */
+#define TIF_RESTART_BLOCK	4
+#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_SYSCALL_AUDIT	6
 #define TIF_RESTORE_SIGMASK	7
 #define TIF_FREEZE		16	/* is freezing for suspend */
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index fda30d2..97974c1 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -8,6 +8,7 @@
 #include "linux/smp_lock.h"
 #include "linux/ptrace.h"
 #include "linux/sched.h"
+#include "linux/slab.h"
 #include "asm/current.h"
 #include "asm/processor.h"
 #include "asm/uaccess.h"
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 89474ba..a3f0b04 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -12,6 +12,7 @@
 #include "linux/module.h"
 #include "linux/sched.h"
 #include "linux/seq_file.h"
+#include "linux/slab.h"
 #include "as-layout.h"
 #include "kern_util.h"
 #include "os.h"
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index a5d5e70..8137ccc 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -5,10 +5,10 @@
 
 #include <linux/stddef.h>
 #include <linux/bootmem.h>
-#include <linux/gfp.h>
 #include <linux/highmem.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
+#include <linux/slab.h>
 #include <asm/fixmap.h>
 #include <asm/page.h>
 #include "as-layout.h"
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 2f910a1..fab4371 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -7,13 +7,13 @@
 #include <linux/stddef.h>
 #include <linux/err.h>
 #include <linux/hardirq.h>
-#include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/personality.h>
 #include <linux/proc_fs.h>
 #include <linux/ptrace.h>
 #include <linux/random.h>
+#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/tick.h>
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 8e3d69e..4845099 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -12,16 +12,25 @@
 #endif
 #include "skas_ptrace.h"
 
-static inline void set_singlestepping(struct task_struct *child, int on)
+
+
+void user_enable_single_step(struct task_struct *child)
 {
-	if (on)
-		child->ptrace |= PT_DTRACE;
-	else
-		child->ptrace &= ~PT_DTRACE;
+	child->ptrace |= PT_DTRACE;
 	child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
-	SUBARCH_SET_SINGLESTEPPING(child, on);
+	SUBARCH_SET_SINGLESTEPPING(child, 1);
+#endif
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_DTRACE;
+	child->thread.singlestep_syscall = 0;
+
+#ifdef SUBARCH_SET_SINGLESTEPPING
+	SUBARCH_SET_SINGLESTEPPING(child, 0);
 #endif
 }
 
@@ -30,7 +39,7 @@ static inline void set_singlestepping(struct task_struct *child, int on)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	set_singlestepping(child,0);
+	user_disable_single_step(child);
 }
 
 extern int peek_user(struct task_struct * child, long addr, long data);
@@ -69,53 +78,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = -EIO;
 		break;
 
-	/* continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* restart after signal. */
-	case PTRACE_CONT: {
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		set_singlestepping(child, 0);
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-
-		set_singlestepping(child, 0);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_singlestepping(child, 1);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef PTRACE_GETREGS
 	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
 		if (!access_ok(VERIFY_WRITE, p, MAX_REG_OFFSET)) {
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index 00197d3..869bec9 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -4,6 +4,7 @@
  */
 
 #include "linux/sched.h"
+#include "linux/slab.h"
 #include "kern_util.h"
 #include "os.h"
 #include "skas.h"
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 8bfd1e9..3d099f9 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -5,6 +5,7 @@
 
 #include "linux/mm.h"
 #include "linux/sched.h"
+#include "linux/slab.h"
 #include "asm/pgalloc.h"
 #include "asm/pgtable.h"
 #include "as-layout.h"
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index 4e3b820..f5173e1 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -10,7 +10,7 @@
 #include "sysdep/syscalls.h"
 
 extern int syscall_table_size;
-#define NR_syscalls (syscall_table_size / sizeof(void *))
+#define NR_SYSCALLS (syscall_table_size / sizeof(void *))
 
 void handle_syscall(struct uml_pt_regs *r)
 {
@@ -30,7 +30,7 @@ void handle_syscall(struct uml_pt_regs *r)
 	 * in case it's a compiler bug.
 	 */
 	syscall = UPT_SYSCALL_NR(r);
-	if ((syscall >= NR_syscalls) || (syscall < 0))
+	if ((syscall >= NR_SYSCALLS) || (syscall < 0))
 		result = -ENOSYS;
 	else result = EXECUTE_SYSCALL(syscall, regs);
 
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index e22c969..6966342 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -81,7 +81,7 @@ static int do_op_one_page(unsigned long addr, int len, int is_write,
 
 	current->thread.fault_catcher = NULL;
 
-	kunmap_atomic(page, KM_UML_USERCOPY);
+	kunmap_atomic((void *)addr, KM_UML_USERCOPY);
 
 	return n;
 }
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index cccab85..4393173 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -51,51 +51,6 @@ long old_mmap(unsigned long addr, unsigned long len,
 	return err;
 }
 
-long sys_uname(struct old_utsname __user * name)
-{
-	long err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	return err?-EFAULT:0;
-}
-
-long sys_olduname(struct oldold_utsname __user * name)
-{
-	long error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
 int kernel_execve(const char *filename, char *const argv[], char *const envp[])
 {
 	mm_segment_t fs;
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 93a11d7..e696144 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -10,6 +10,7 @@
 #include <errno.h>
 #include <fcntl.h>
 #include <string.h>
+#include <sys/stat.h>
 #include <sys/mman.h>
 #include <sys/param.h>
 #include "init.h"
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 1b549bc..804b28d 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -6,6 +6,8 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 	ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
 	sys_call_table.o tls.o
 
+obj-$(CONFIG_BINFMT_ELF) += elfcore.o
+
 subarch-obj-y = lib/semaphore_32.o lib/string_32.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module.o
diff --git a/arch/um/sys-i386/asm/elf.h b/arch/um/sys-i386/asm/elf.h
index 7708854..a979a22 100644
--- a/arch/um/sys-i386/asm/elf.h
+++ b/arch/um/sys-i386/asm/elf.h
@@ -75,6 +75,8 @@ typedef struct user_i387_struct elf_fpregset_t;
 	pr_reg[16] = PT_REGS_SS(regs);		\
 } while (0);
 
+struct task_struct;
+
 extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
 
 #define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
@@ -116,47 +118,4 @@ do {								\
 	}							\
 } while (0)
 
-/*
- * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the vsyscall DSO contents.  Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the vsyscall DSO was being used.
- */
-#define ELF_CORE_EXTRA_PHDRS						      \
-	(vsyscall_ehdr ? (((struct elfhdr *)vsyscall_ehdr)->e_phnum) : 0 )
-
-#define ELF_CORE_WRITE_EXTRA_PHDRS					      \
-if ( vsyscall_ehdr ) {							      \
-	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
-	const struct elf_phdr *const phdrp =				      \
-		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
-	int i;								      \
-	Elf32_Off ofs = 0;						      \
-	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
-		struct elf_phdr phdr = phdrp[i];			      \
-		if (phdr.p_type == PT_LOAD) {				      \
-			ofs = phdr.p_offset = offset;			      \
-			offset += phdr.p_filesz;			      \
-		}							      \
-		else							      \
-			phdr.p_offset += ofs;				      \
-		phdr.p_paddr = 0; /* match other core phdrs */		      \
-		DUMP_WRITE(&phdr, sizeof(phdr));			      \
-	}								      \
-}
-#define ELF_CORE_WRITE_EXTRA_DATA					      \
-if ( vsyscall_ehdr ) {							      \
-	const struct elfhdr *const ehdrp = (struct elfhdr *)vsyscall_ehdr;    \
-	const struct elf_phdr *const phdrp =				      \
-		(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);   \
-	int i;								      \
-	for (i = 0; i < ehdrp->e_phnum; ++i) {				      \
-		if (phdrp[i].p_type == PT_LOAD)				      \
-			DUMP_WRITE((void *) phdrp[i].p_vaddr,		      \
-				   phdrp[i].p_filesz);			      \
-	}								      \
-}
-
 #endif
diff --git a/arch/um/sys-i386/elfcore.c b/arch/um/sys-i386/elfcore.c
new file mode 100644
index 0000000..6bb49b6
--- /dev/null
+++ b/arch/um/sys-i386/elfcore.c
@@ -0,0 +1,83 @@
+#include <linux/elf.h>
+#include <linux/coredump.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+
+#include <asm/elf.h>
+
+
+Elf32_Half elf_core_extra_phdrs(void)
+{
+	return vsyscall_ehdr ? (((struct elfhdr *)vsyscall_ehdr)->e_phnum) : 0;
+}
+
+int elf_core_write_extra_phdrs(struct file *file, loff_t offset, size_t *size,
+			       unsigned long limit)
+{
+	if ( vsyscall_ehdr ) {
+		const struct elfhdr *const ehdrp =
+			(struct elfhdr *) vsyscall_ehdr;
+		const struct elf_phdr *const phdrp =
+			(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);
+		int i;
+		Elf32_Off ofs = 0;
+
+		for (i = 0; i < ehdrp->e_phnum; ++i) {
+			struct elf_phdr phdr = phdrp[i];
+
+			if (phdr.p_type == PT_LOAD) {
+				ofs = phdr.p_offset = offset;
+				offset += phdr.p_filesz;
+			} else {
+				phdr.p_offset += ofs;
+			}
+			phdr.p_paddr = 0; /* match other core phdrs */
+			*size += sizeof(phdr);
+			if (*size > limit
+			    || !dump_write(file, &phdr, sizeof(phdr)))
+				return 0;
+		}
+	}
+	return 1;
+}
+
+int elf_core_write_extra_data(struct file *file, size_t *size,
+			      unsigned long limit)
+{
+	if ( vsyscall_ehdr ) {
+		const struct elfhdr *const ehdrp =
+			(struct elfhdr *) vsyscall_ehdr;
+		const struct elf_phdr *const phdrp =
+			(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);
+		int i;
+
+		for (i = 0; i < ehdrp->e_phnum; ++i) {
+			if (phdrp[i].p_type == PT_LOAD) {
+				void *addr = (void *) phdrp[i].p_vaddr;
+				size_t filesz = phdrp[i].p_filesz;
+
+				*size += filesz;
+				if (*size > limit
+				    || !dump_write(file, addr, filesz))
+					return 0;
+			}
+		}
+	}
+	return 1;
+}
+
+size_t elf_core_extra_data_size(void)
+{
+	if ( vsyscall_ehdr ) {
+		const struct elfhdr *const ehdrp =
+			(struct elfhdr *)vsyscall_ehdr;
+		const struct elf_phdr *const phdrp =
+			(const struct elf_phdr *) (vsyscall_ehdr + ehdrp->e_phoff);
+		int i;
+
+		for (i = 0; i < ehdrp->e_phnum; ++i)
+			if (phdrp[i].p_type == PT_LOAD)
+				return (size_t) phdrp[i].p_filesz;
+	}
+	return 0;
+}
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a4846a8..3f2bf20 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -5,6 +5,7 @@
 
 #include <linux/mm.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <asm/unistd.h>
 #include "os.h"
 #include "proc_mm.h"
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h
index e778767..05cb796 100644
--- a/arch/um/sys-i386/shared/sysdep/syscalls.h
+++ b/arch/um/sys-i386/shared/sysdep/syscalls.h
@@ -13,8 +13,6 @@ typedef long syscall_handler_t(struct pt_regs);
  */
 extern syscall_handler_t sys_rt_sigaction;
 
-extern syscall_handler_t old_mmap_i386;
-
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/um/sys-i386/sys_call_table.S
index c6260dd..de274071 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/um/sys-i386/sys_call_table.S
@@ -7,7 +7,7 @@
 #define sys_vm86old sys_ni_syscall
 #define sys_vm86 sys_ni_syscall
 
-#define old_mmap old_mmap_i386
+#define old_mmap sys_old_mmap
 
 #define ptregs_fork sys_fork
 #define ptregs_execve sys_execve
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 857ca0b..70ca357 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -12,57 +12,6 @@
 #include "asm/unistd.h"
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-extern int old_mmap(unsigned long addr, unsigned long len,
-		    unsigned long prot, unsigned long flags,
-		    unsigned long fd, unsigned long offset);
-
-long old_mmap_i386(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = old_mmap(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
- out:
-	return err;
-}
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp;
-	fd_set __user *outp;
-	fd_set __user *exp;
-	struct timeval __user *tvp;
-};
-
-long old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
  * The prototype on i386 is:
  *
  *     int clone(int flags, void * child_stack, int * parent_tidptr, struct user_desc * newtls, int * child_tidptr)
@@ -85,92 +34,6 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp,
 	return ret;
 }
 
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-long sys_ipc (uint call, int first, int second,
-	     int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *) ptr,
-				      second,
-				      (const struct timespec __user *) fifth);
-	case SEMGET:
-		return sys_semget (first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl (first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd (first, (struct msgbuf *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge *) ptr,
-					   sizeof (tmp)))
-				return -EFAULT;
-			return sys_msgrcv (first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-		        panic("msgrcv with version != 0");
-			return sys_msgrcv (first,
-					   (struct msgbuf *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget ((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl (first, second, (struct msqid_ds *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user (raddr, (ulong *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			return do_shmat (first, (char *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt ((char *)ptr);
-	case SHMGET:
-		return sys_shmget (first, second, third);
-	case SHMCTL:
-		return sys_shmctl (first, second,
-				   (struct shmid_ds *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 			 struct old_sigaction __user *oact)
 {
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index 2201e9c..c1ea9eb 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -8,7 +8,8 @@ obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
 	setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
 	sysrq.o ksyms.o tls.o
 
-subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
+subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o \
+		lib/rwsem_64.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
index 49655c8..d760967f 100644
--- a/arch/um/sys-x86_64/asm/elf.h
+++ b/arch/um/sys-x86_64/asm/elf.h
@@ -95,6 +95,8 @@ typedef struct user_i387_struct elf_fpregset_t;
 	(pr_reg)[25] = 0;					\
 	(pr_reg)[26] = 0;
 
+struct task_struct;
+
 extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
 
 #define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
index 1a899a7..b6b65c7 100644
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c
@@ -6,6 +6,7 @@
 
 #include <linux/personality.h>
 #include <linux/ptrace.h>
+#include <linux/kernel.h>
 #include <asm/unistd.h>
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
@@ -165,8 +166,6 @@ struct rt_sigframe
 	struct _fpstate fpstate;
 };
 
-#define round_down(m, n) (((m) / (n)) * (n))
-
 int setup_signal_stack_si(unsigned long stack_top, int sig,
 			  struct k_sigaction *ka, struct pt_regs * regs,
 			  siginfo_t *info, sigset_t *set)
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/um/sys-x86_64/syscall_table.c
index dd21d69..47d469e 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/um/sys-x86_64/syscall_table.c
@@ -26,11 +26,6 @@
 
 /* On UML we call it this way ("old" means it's not mmap2) */
 #define sys_mmap old_mmap
-/*
- * On x86-64 sys_uname is actually sys_newuname plus a compatibility trick.
- * See arch/x86_64/kernel/sys_x86_64.c
- */
-#define sys_uname sys_uname64
 
 #define stub_clone sys_clone
 #define stub_fork sys_fork
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index f1199fd..f3d82bb 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -12,20 +12,6 @@
 #include "asm/uaccess.h"
 #include "os.h"
 
-asmlinkage long sys_uname64(struct new_utsname __user * name)
-{
-	int err;
-
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr)
 {
 	unsigned long *ptr = addr, tmp;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index eb40925..dcb0593 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -31,6 +31,7 @@ config X86
 	select ARCH_WANT_FRAME_POINTERS
 	select HAVE_DMA_ATTRS
 	select HAVE_KRETPROBES
+	select HAVE_OPTPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
@@ -45,17 +46,22 @@ config X86
 	select HAVE_GENERIC_DMA_COHERENT if X86_32
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select USER_STACKTRACE_SUPPORT
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_DMA_API_DEBUG
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_HW_BREAKPOINT
+	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS
 	select ANON_INODES
 	select HAVE_ARCH_KMEMCHECK
 	select HAVE_USER_RETURN_NOTIFIER
 
+config INSTRUCTION_DECODER
+	def_bool (KPROBES || PERF_EVENTS)
+
 config OUTPUT_FORMAT
 	string
 	default "elf32-i386" if X86_32
@@ -100,6 +106,12 @@ config ZONE_DMA
 config SBUS
 	bool
 
+config NEED_DMA_MAP_STATE
+       def_bool (X86_64 || DMAR || DMA_API_DEBUG)
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	def_bool y
 
@@ -183,26 +195,26 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_EARLY_RES
+	def_bool y
+
 config HAVE_INTEL_TXT
 	def_bool y
 	depends on EXPERIMENTAL && DMAR && ACPI
 
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
        def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config GENERIC_PENDING_IRQ
-	bool
+	def_bool y
 	depends on GENERIC_HARDIRQS && SMP
-	default y
 
 config USE_GENERIC_SMP_HELPERS
 	def_bool y
@@ -217,19 +229,22 @@ config X86_64_SMP
 	depends on X86_64 && SMP
 
 config X86_HT
-	bool
+	def_bool y
 	depends on SMP
-	default y
 
 config X86_TRAMPOLINE
-	bool
+	def_bool y
 	depends on SMP || (64BIT && ACPI_SLEEP)
-	default y
 
 config X86_32_LAZY_GS
 	def_bool y
 	depends on X86_32 && !CC_STACKPROTECTOR
 
+config ARCH_HWEIGHT_CFLAGS
+	string
+	default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
+	default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
+
 config KTIME_SCALAR
 	def_bool X86_32
 source "init/Kconfig"
@@ -388,8 +403,12 @@ config X86_ELAN
 
 config X86_MRST
        bool "Moorestown MID platform"
+	depends on PCI
+	depends on PCI_GOANY
 	depends on X86_32
 	depends on X86_EXTENDED_PLATFORM
+	depends on X86_IO_APIC
+	select APB_TIMER
 	---help---
 	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
 	  Internet Device(MID) platform. Moorestown consists of two chips:
@@ -424,6 +443,7 @@ config X86_32_NON_STANDARD
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
 	depends on X86_32_NON_STANDARD
+	depends on PCI
 	select NUMA
 	select X86_MPPARSE
 	---help---
@@ -434,7 +454,7 @@ config X86_NUMAQ
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
 config X86_SUPPORTS_MEMORY_FAILURE
-	bool
+	def_bool y
 	# MCE code calls memory_failure():
 	depends on X86_MCE
 	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
@@ -442,7 +462,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
 	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
-	default y
 
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
@@ -557,7 +576,6 @@ config PARAVIRT_SPINLOCKS
 
 config PARAVIRT_CLOCK
 	bool
-	default n
 
 endif
 
@@ -568,6 +586,18 @@ config PARAVIRT_DEBUG
 	  Enable to debug paravirt_ops internals.  Specifically, BUG if
 	  a paravirt_op is missing when it is called.
 
+config NO_BOOTMEM
+	default y
+	bool "Disable Bootmem code"
+	---help---
+	  Use early_res directly instead of bootmem before slab is ready.
+		- allocator (buddy) [generic]
+		- early allocator (bootmem) [generic]
+		- very early allocator (reserve_early*()) [x86]
+		- very very early allocator (early brk model) [x86]
+	  So reduce one layer between early allocator to final allocator
+
+
 config MEMTEST
 	bool "Memtest"
 	---help---
@@ -612,6 +642,16 @@ config HPET_EMULATE_RTC
 	def_bool y
 	depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
 
+config APB_TIMER
+       def_bool y if MRST
+       prompt "Langwell APB Timer Support" if X86_MRST
+       help
+         APB timer is the replacement for 8254, HPET on X86 MID platforms.
+         The APBT provides a stable time base on SMP
+         systems, unlike the TSC, but it is more expensive to access,
+         as it is off-chip. APB timers are always running regardless of CPU
+         C states, they are used as per CPU clockevent device when possible.
+
 # Mark as embedded because too many people got it wrong.
 # The code disables itself when not needed.
 config DMI
@@ -627,7 +667,7 @@ config GART_IOMMU
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	depends on X86_64 && PCI
+	depends on X86_64 && PCI && K8_NB
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
@@ -714,7 +754,6 @@ config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
 	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
 	select CPUMASK_OFFSTACK
-	default n
 	---help---
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
@@ -794,7 +833,6 @@ config X86_VISWS_APIC
 
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
-	default n
 	depends on X86_IO_APIC
 	---help---
 	  This option enables a workaround that fixes a source of
@@ -841,9 +879,8 @@ config X86_MCE_AMD
 	   the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
-	def_bool n
+	bool "Support for old Pentium 5 / WinChip machine checks"
 	depends on X86_32 && X86_MCE
-	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
 	  systems. These typically need to be enabled explicitely on the command
@@ -851,8 +888,7 @@ config X86_ANCIENT_MCE
 
 config X86_MCE_THRESHOLD
 	depends on X86_MCE_AMD || X86_MCE_INTEL
-	bool
-	default y
+	def_bool y
 
 config X86_MCE_INJECT
 	depends on X86_MCE
@@ -991,8 +1027,8 @@ config X86_CPUID
 
 choice
 	prompt "High Memory Support"
-	default HIGHMEM4G if !X86_NUMAQ
 	default HIGHMEM64G if X86_NUMAQ
+	default HIGHMEM4G
 	depends on X86_32
 
 config NOHIGHMEM
@@ -1181,8 +1217,8 @@ config NUMA_EMU
 
 config NODES_SHIFT
 	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
-	range 1 9
-	default "9" if MAXSMP
+	range 1 10
+	default "10" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1250,7 +1286,7 @@ source "mm/Kconfig"
 
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
-	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
+	depends on HIGHMEM
 	---help---
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
@@ -1334,8 +1370,7 @@ config MATH_EMULATION
 	  kernel, it won't hurt.
 
 config MTRR
-	bool
-	default y
+	def_bool y
 	prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
 	---help---
 	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
@@ -1401,8 +1436,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 	  mtrr_spare_reg_nr=N on the kernel command line.
 
 config X86_PAT
-	bool
-	default y
+	def_bool y
 	prompt "x86 PAT support" if EMBEDDED
 	depends on MTRR
 	---help---
@@ -1570,8 +1604,7 @@ config X86_NEED_RELOCS
 	depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-	hex
-	prompt "Alignment value to which kernel should be aligned" if X86_32
+	hex "Alignment value to which kernel should be aligned" if X86_32
 	default "0x1000000"
 	range 0x2000 0x1000000
 	---help---
@@ -1618,7 +1651,6 @@ config COMPAT_VDSO
 
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
-	default n
 	---help---
 	  Allow for specifying boot arguments to the kernel at
 	  build time.  On some systems (e.g. embedded ones), it is
@@ -1652,7 +1684,6 @@ config CMDLINE
 
 config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides boot loader arguments"
-	default n
 	depends on CMDLINE_BOOL
 	---help---
 	  Set this option to 'Y' to have the kernel ignore the boot loader
@@ -1675,6 +1706,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID
 	def_bool X86_64
 	depends on NUMA
 
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool X86_64
+	depends on NUMA
+
 menu "Power management and ACPI options"
 
 config ARCH_HIBERNATION_HEADER
@@ -1688,8 +1723,7 @@ source "drivers/acpi/Kconfig"
 source "drivers/sfi/Kconfig"
 
 config X86_APM_BOOT
-	bool
-	default y
+	def_bool y
 	depends on APM || APM_MODULE
 
 menuconfig APM
@@ -1896,6 +1930,14 @@ config PCI_MMCONFIG
 	bool "Support mmconfig PCI config space access"
 	depends on X86_64 && PCI && ACPI
 
+config PCI_CNB20LE_QUIRK
+	bool "Read CNB20LE Host Bridge Windows"
+	depends on PCI
+	help
+	  Read the PCI windows out of the CNB20LE host bridge. This allows
+	  PCI hotplug to work on systems with the CNB20LE chipset which do
+	  not have ACPI.
+
 config DMAR
 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
 	depends on PCI_MSI && ACPI && EXPERIMENTAL
@@ -1918,8 +1960,7 @@ config DMAR_DEFAULT_ON
 	  experimental.
 
 config DMAR_BROKEN_GFX_WA
-	def_bool n
-	prompt "Workaround broken graphics drivers (going away soon)"
+	bool "Workaround broken graphics drivers (going away soon)"
 	depends on DMAR && BROKEN
 	---help---
 	  Current Graphics drivers tend to use physical address
@@ -2017,7 +2058,6 @@ config SCx200HR_TIMER
 config OLPC
 	bool "One Laptop Per Child support"
 	select GPIOLIB
-	default n
 	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
@@ -2026,7 +2066,7 @@ endif # X86_32
 
 config K8_NB
 	def_bool y
-	depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+	depends on CPU_SUP_AMD && PCI
 
 source "drivers/pcmcia/Kconfig"
 
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index f20ddf8..2ac9069 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -319,7 +319,7 @@ config X86_L1_CACHE_SHIFT
 
 config X86_XADD
 	def_bool y
-	depends on X86_32 && !M386
+	depends on X86_64 || !M386
 
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
@@ -338,6 +338,10 @@ config X86_F00F_BUG
 	def_bool y
 	depends on M586MMX || M586TSC || M586 || M486 || M386
 
+config X86_INVD_BUG
+	def_bool y
+	depends on M486 || M386
+
 config X86_WP_WORKS_OK
 	def_bool y
 	depends on !M386
@@ -502,23 +506,3 @@ config CPU_SUP_UMC_32
 	  CPU might render the kernel unbootable.
 
 	  If unsure, say N.
-
-config X86_DS
-	def_bool X86_PTRACE_BTS
-	depends on X86_DEBUGCTLMSR
-	select HAVE_HW_BRANCH_TRACER
-
-config X86_PTRACE_BTS
-	bool "Branch Trace Store"
-	default y
-	depends on X86_DEBUGCTLMSR
-	depends on BROKEN
-	---help---
-	  This adds a ptrace interface to the hardware's branch trace store.
-
-	  Debuggers may use it to collect an execution trace of the debugged
-	  application in order to answer the question 'how did I get here?'.
-	  Debuggers may trace user mode as well as kernel mode.
-
-	  Say Y unless there is no application development on this machine
-	  and you want to save a small amount of code size.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index bc01e3e..7508508 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -45,7 +45,6 @@ config EARLY_PRINTK
 
 config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
-	default n
 	depends on EARLY_PRINTK && PCI
 	---help---
 	  Write kernel log output directly into the EHCI debug port.
@@ -76,7 +75,6 @@ config DEBUG_PER_CPU_MAPS
 	bool "Debug access to per_cpu maps"
 	depends on DEBUG_KERNEL
 	depends on SMP
-	default n
 	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
@@ -174,15 +172,6 @@ config IOMMU_LEAK
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
-config X86_DS_SELFTEST
-    bool "DS selftest"
-    default y
-    depends on DEBUG_KERNEL
-    depends on X86_DS
-	---help---
-	  Perform Debug Store selftests at boot time.
-	  If in doubt, say "N".
-
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 78b32be..8aa1b59 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -95,8 +95,9 @@ sp-$(CONFIG_X86_64) := rsp
 cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
 # is .cfi_signal_frame supported too?
 cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
+cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
@@ -135,9 +136,7 @@ drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
 # suspend and hibernation support
 drivers-$(CONFIG_PM) += arch/x86/power/
 
-ifeq ($(CONFIG_X86_32),y)
 drivers-$(CONFIG_FB) += arch/x86/video/
-endif
 
 ####
 # boot loader support. Several targets are kept for legacy purposes
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 3b22fe8..51e2407 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -19,11 +19,6 @@
 #define _ASM_X86_DESC_H 1
 #endif
 
-#ifdef CONFIG_X86_64
-#define _LINUX_STRING_H_ 1
-#define __LINUX_BITMAP_H 1
-#endif
-
 #include <linux/linkage.h>
 #include <linux/screen_info.h>
 #include <linux/elf.h>
@@ -131,8 +126,8 @@ static void error(char *m);
 static struct boot_params *real_mode;		/* Pointer to real-mode data */
 static int quiet;
 
-static void *memset(void *s, int c, unsigned n);
-void *memcpy(void *dest, const void *src, unsigned n);
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *dest, const void *src, size_t n);
 
 static void __putstr(int, const char *);
 #define putstr(__x)  __putstr(0, __x)
@@ -185,11 +180,9 @@ static void __putstr(int error, const char *s)
 		return;
 #endif
 
-#ifdef CONFIG_X86_32
 	if (real_mode->screen_info.orig_video_mode == 0 &&
 	    lines == 0 && cols == 0)
 		return;
-#endif
 
 	x = real_mode->screen_info.orig_x;
 	y = real_mode->screen_info.orig_y;
@@ -223,7 +216,7 @@ static void __putstr(int error, const char *s)
 	outb(0xff & (pos >> 1), vidport+1);
 }
 
-static void *memset(void *s, int c, unsigned n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = s;
@@ -233,7 +226,7 @@ static void *memset(void *s, int c, unsigned n)
 	return s;
 }
 
-void *memcpy(void *dest, const void *src, unsigned n)
+void *memcpy(void *dest, const void *src, size_t n)
 {
 	int i;
 	const char *s = src;
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
index 8ef60f2..919257f 100644
--- a/arch/x86/boot/mkcpustr.c
+++ b/arch/x86/boot/mkcpustr.c
@@ -22,7 +22,7 @@ int main(void)
 	int i, j;
 	const char *str;
 
-	printf("static const char x86_cap_strs[] = \n");
+	printf("static const char x86_cap_strs[] =\n");
 
 	for (i = 0; i < NCAPINTS; i++) {
 		for (j = 0; j < 32; j++) {
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 819caa1..45bc940 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -41,23 +41,15 @@ static __videocard video_vga;
 static u8 vga_set_basic_mode(void)
 {
 	struct biosregs ireg, oreg;
-	u16 ax;
-	u8 rows;
 	u8 mode;
 
 	initregs(&ireg);
 
-	ax = 0x0f00;
+	/* Query current mode */
+	ireg.ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
 
-	set_fs(0);
-	rows = rdfs8(0x484);	/* rows minus one */
-
-	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
-	    (rows == 0 || rows == 24))
-		return mode;
-
 	if (mode != 3 && mode != 7)
 		mode = 3;
 
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index f767164..43eda28 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -298,11 +298,18 @@ static void restore_screen(void)
 	}
 
 	/* Restore cursor position */
+	if (saved.curx >= xs)
+		saved.curx = xs-1;
+	if (saved.cury >= ys)
+		saved.cury = ys-1;
+
 	initregs(&ireg);
 	ireg.ah = 0x02;		/* Set cursor position */
 	ireg.dh = saved.cury;
 	ireg.dl = saved.curx;
 	intcall(0x10, &ireg, NULL);
+
+	store_cursor_position();
 }
 
 void set_video(void)
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 20bb0e1..ff16756 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -32,6 +32,9 @@
 #define IN	IN1
 #define KEY	%xmm2
 #define IV	%xmm3
+#define BSWAP_MASK %xmm10
+#define CTR	%xmm11
+#define INC	%xmm12
 
 #define KEYP	%rdi
 #define OUTP	%rsi
@@ -42,6 +45,7 @@
 #define T1	%r10
 #define TKEYP	T1
 #define T2	%r11
+#define TCTR_LOW T2
 
 _key_expansion_128:
 _key_expansion_256a:
@@ -724,3 +728,114 @@ ENTRY(aesni_cbc_dec)
 	movups IV, (IVP)
 .Lcbc_dec_just_ret:
 	ret
+
+.align 16
+.Lbswap_mask:
+	.byte 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
+
+/*
+ * _aesni_inc_init:	internal ABI
+ *	setup registers used by _aesni_inc
+ * input:
+ *	IV
+ * output:
+ *	CTR:	== IV, in little endian
+ *	TCTR_LOW: == lower qword of CTR
+ *	INC:	== 1, in little endian
+ *	BSWAP_MASK == endian swapping mask
+ */
+_aesni_inc_init:
+	movaps .Lbswap_mask, BSWAP_MASK
+	movaps IV, CTR
+	PSHUFB_XMM BSWAP_MASK CTR
+	mov $1, TCTR_LOW
+	MOVQ_R64_XMM TCTR_LOW INC
+	MOVQ_R64_XMM CTR TCTR_LOW
+	ret
+
+/*
+ * _aesni_inc:		internal ABI
+ *	Increase IV by 1, IV is in big endian
+ * input:
+ *	IV
+ *	CTR:	== IV, in little endian
+ *	TCTR_LOW: == lower qword of CTR
+ *	INC:	== 1, in little endian
+ *	BSWAP_MASK == endian swapping mask
+ * output:
+ *	IV:	Increase by 1
+ * changed:
+ *	CTR:	== output IV, in little endian
+ *	TCTR_LOW: == lower qword of CTR
+ */
+_aesni_inc:
+	paddq INC, CTR
+	add $1, TCTR_LOW
+	jnc .Linc_low
+	pslldq $8, INC
+	paddq INC, CTR
+	psrldq $8, INC
+.Linc_low:
+	movaps CTR, IV
+	PSHUFB_XMM BSWAP_MASK IV
+	ret
+
+/*
+ * void aesni_ctr_enc(struct crypto_aes_ctx *ctx, const u8 *dst, u8 *src,
+ *		      size_t len, u8 *iv)
+ */
+ENTRY(aesni_ctr_enc)
+	cmp $16, LEN
+	jb .Lctr_enc_just_ret
+	mov 480(KEYP), KLEN
+	movups (IVP), IV
+	call _aesni_inc_init
+	cmp $64, LEN
+	jb .Lctr_enc_loop1
+.align 4
+.Lctr_enc_loop4:
+	movaps IV, STATE1
+	call _aesni_inc
+	movups (INP), IN1
+	movaps IV, STATE2
+	call _aesni_inc
+	movups 0x10(INP), IN2
+	movaps IV, STATE3
+	call _aesni_inc
+	movups 0x20(INP), IN3
+	movaps IV, STATE4
+	call _aesni_inc
+	movups 0x30(INP), IN4
+	call _aesni_enc4
+	pxor IN1, STATE1
+	movups STATE1, (OUTP)
+	pxor IN2, STATE2
+	movups STATE2, 0x10(OUTP)
+	pxor IN3, STATE3
+	movups STATE3, 0x20(OUTP)
+	pxor IN4, STATE4
+	movups STATE4, 0x30(OUTP)
+	sub $64, LEN
+	add $64, INP
+	add $64, OUTP
+	cmp $64, LEN
+	jge .Lctr_enc_loop4
+	cmp $16, LEN
+	jb .Lctr_enc_ret
+.align 4
+.Lctr_enc_loop1:
+	movaps IV, STATE
+	call _aesni_inc
+	movups (INP), IN
+	call _aesni_enc1
+	pxor IN, STATE
+	movups STATE, (OUTP)
+	sub $16, LEN
+	add $16, INP
+	add $16, OUTP
+	cmp $16, LEN
+	jge .Lctr_enc_loop1
+.Lctr_enc_ret:
+	movups IV, (IVP)
+.Lctr_enc_just_ret:
+	ret
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 49c552c..2cb3dcc 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -18,6 +18,7 @@
 #include <crypto/algapi.h>
 #include <crypto/aes.h>
 #include <crypto/cryptd.h>
+#include <crypto/ctr.h>
 #include <asm/i387.h>
 #include <asm/aes.h>
 
@@ -58,6 +59,8 @@ asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out,
 			      const u8 *in, unsigned int len, u8 *iv);
 asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
 			      const u8 *in, unsigned int len, u8 *iv);
+asmlinkage void aesni_ctr_enc(struct crypto_aes_ctx *ctx, u8 *out,
+			      const u8 *in, unsigned int len, u8 *iv);
 
 static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
 {
@@ -321,6 +324,72 @@ static struct crypto_alg blk_cbc_alg = {
 	},
 };
 
+static void ctr_crypt_final(struct crypto_aes_ctx *ctx,
+			    struct blkcipher_walk *walk)
+{
+	u8 *ctrblk = walk->iv;
+	u8 keystream[AES_BLOCK_SIZE];
+	u8 *src = walk->src.virt.addr;
+	u8 *dst = walk->dst.virt.addr;
+	unsigned int nbytes = walk->nbytes;
+
+	aesni_enc(ctx, keystream, ctrblk);
+	crypto_xor(keystream, src, nbytes);
+	memcpy(dst, keystream, nbytes);
+	crypto_inc(ctrblk, AES_BLOCK_SIZE);
+}
+
+static int ctr_crypt(struct blkcipher_desc *desc,
+		     struct scatterlist *dst, struct scatterlist *src,
+		     unsigned int nbytes)
+{
+	struct crypto_aes_ctx *ctx = aes_ctx(crypto_blkcipher_ctx(desc->tfm));
+	struct blkcipher_walk walk;
+	int err;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
+	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	kernel_fpu_begin();
+	while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) {
+		aesni_ctr_enc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+			      nbytes & AES_BLOCK_MASK, walk.iv);
+		nbytes &= AES_BLOCK_SIZE - 1;
+		err = blkcipher_walk_done(desc, &walk, nbytes);
+	}
+	if (walk.nbytes) {
+		ctr_crypt_final(ctx, &walk);
+		err = blkcipher_walk_done(desc, &walk, 0);
+	}
+	kernel_fpu_end();
+
+	return err;
+}
+
+static struct crypto_alg blk_ctr_alg = {
+	.cra_name		= "__ctr-aes-aesni",
+	.cra_driver_name	= "__driver-ctr-aes-aesni",
+	.cra_priority		= 0,
+	.cra_flags		= CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx)+AESNI_ALIGN-1,
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_blkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(blk_ctr_alg.cra_list),
+	.cra_u = {
+		.blkcipher = {
+			.min_keysize	= AES_MIN_KEY_SIZE,
+			.max_keysize	= AES_MAX_KEY_SIZE,
+			.ivsize		= AES_BLOCK_SIZE,
+			.setkey		= aes_set_key,
+			.encrypt	= ctr_crypt,
+			.decrypt	= ctr_crypt,
+		},
+	},
+};
+
 static int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
 			unsigned int key_len)
 {
@@ -467,13 +536,11 @@ static struct crypto_alg ablk_cbc_alg = {
 	},
 };
 
-#ifdef HAS_CTR
 static int ablk_ctr_init(struct crypto_tfm *tfm)
 {
 	struct cryptd_ablkcipher *cryptd_tfm;
 
-	cryptd_tfm = cryptd_alloc_ablkcipher("fpu(ctr(__driver-aes-aesni))",
-					     0, 0);
+	cryptd_tfm = cryptd_alloc_ablkcipher("__driver-ctr-aes-aesni", 0, 0);
 	if (IS_ERR(cryptd_tfm))
 		return PTR_ERR(cryptd_tfm);
 	ablk_init_common(tfm, cryptd_tfm);
@@ -500,11 +567,50 @@ static struct crypto_alg ablk_ctr_alg = {
 			.ivsize		= AES_BLOCK_SIZE,
 			.setkey		= ablk_set_key,
 			.encrypt	= ablk_encrypt,
-			.decrypt	= ablk_decrypt,
+			.decrypt	= ablk_encrypt,
 			.geniv		= "chainiv",
 		},
 	},
 };
+
+#ifdef HAS_CTR
+static int ablk_rfc3686_ctr_init(struct crypto_tfm *tfm)
+{
+	struct cryptd_ablkcipher *cryptd_tfm;
+
+	cryptd_tfm = cryptd_alloc_ablkcipher(
+		"rfc3686(__driver-ctr-aes-aesni)", 0, 0);
+	if (IS_ERR(cryptd_tfm))
+		return PTR_ERR(cryptd_tfm);
+	ablk_init_common(tfm, cryptd_tfm);
+	return 0;
+}
+
+static struct crypto_alg ablk_rfc3686_ctr_alg = {
+	.cra_name		= "rfc3686(ctr(aes))",
+	.cra_driver_name	= "rfc3686-ctr-aes-aesni",
+	.cra_priority		= 400,
+	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
+	.cra_blocksize		= 1,
+	.cra_ctxsize		= sizeof(struct async_aes_ctx),
+	.cra_alignmask		= 0,
+	.cra_type		= &crypto_ablkcipher_type,
+	.cra_module		= THIS_MODULE,
+	.cra_list		= LIST_HEAD_INIT(ablk_rfc3686_ctr_alg.cra_list),
+	.cra_init		= ablk_rfc3686_ctr_init,
+	.cra_exit		= ablk_exit,
+	.cra_u = {
+		.ablkcipher = {
+			.min_keysize = AES_MIN_KEY_SIZE+CTR_RFC3686_NONCE_SIZE,
+			.max_keysize = AES_MAX_KEY_SIZE+CTR_RFC3686_NONCE_SIZE,
+			.ivsize	     = CTR_RFC3686_IV_SIZE,
+			.setkey	     = ablk_set_key,
+			.encrypt     = ablk_encrypt,
+			.decrypt     = ablk_decrypt,
+			.geniv	     = "seqiv",
+		},
+	},
+};
 #endif
 
 #ifdef HAS_LRW
@@ -640,13 +746,17 @@ static int __init aesni_init(void)
 		goto blk_ecb_err;
 	if ((err = crypto_register_alg(&blk_cbc_alg)))
 		goto blk_cbc_err;
+	if ((err = crypto_register_alg(&blk_ctr_alg)))
+		goto blk_ctr_err;
 	if ((err = crypto_register_alg(&ablk_ecb_alg)))
 		goto ablk_ecb_err;
 	if ((err = crypto_register_alg(&ablk_cbc_alg)))
 		goto ablk_cbc_err;
-#ifdef HAS_CTR
 	if ((err = crypto_register_alg(&ablk_ctr_alg)))
 		goto ablk_ctr_err;
+#ifdef HAS_CTR
+	if ((err = crypto_register_alg(&ablk_rfc3686_ctr_alg)))
+		goto ablk_rfc3686_ctr_err;
 #endif
 #ifdef HAS_LRW
 	if ((err = crypto_register_alg(&ablk_lrw_alg)))
@@ -675,13 +785,17 @@ ablk_pcbc_err:
 ablk_lrw_err:
 #endif
 #ifdef HAS_CTR
+	crypto_unregister_alg(&ablk_rfc3686_ctr_alg);
+ablk_rfc3686_ctr_err:
+#endif
 	crypto_unregister_alg(&ablk_ctr_alg);
 ablk_ctr_err:
-#endif
 	crypto_unregister_alg(&ablk_cbc_alg);
 ablk_cbc_err:
 	crypto_unregister_alg(&ablk_ecb_alg);
 ablk_ecb_err:
+	crypto_unregister_alg(&blk_ctr_alg);
+blk_ctr_err:
 	crypto_unregister_alg(&blk_cbc_alg);
 blk_cbc_err:
 	crypto_unregister_alg(&blk_ecb_alg);
@@ -705,10 +819,12 @@ static void __exit aesni_exit(void)
 	crypto_unregister_alg(&ablk_lrw_alg);
 #endif
 #ifdef HAS_CTR
-	crypto_unregister_alg(&ablk_ctr_alg);
+	crypto_unregister_alg(&ablk_rfc3686_ctr_alg);
 #endif
+	crypto_unregister_alg(&ablk_ctr_alg);
 	crypto_unregister_alg(&ablk_cbc_alg);
 	crypto_unregister_alg(&ablk_ecb_alg);
+	crypto_unregister_alg(&blk_ctr_alg);
 	crypto_unregister_alg(&blk_cbc_alg);
 	crypto_unregister_alg(&blk_ecb_alg);
 	crypto_unregister_alg(&__aesni_alg);
diff --git a/arch/x86/crypto/fpu.c b/arch/x86/crypto/fpu.c
index daef6cd..1a8f864 100644
--- a/arch/x86/crypto/fpu.c
+++ b/arch/x86/crypto/fpu.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <asm/i387.h>
 
 struct crypto_fpu_ctx {
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed..575331c 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
 
 #include <asm/asm-offsets.h>
 
-/* return adress at 0 */
+/* return address at 0 */
 
 #define in_blk    12  /* input byte array address parameter*/
 #define out_blk   8  /* output byte array address parameter*/
@@ -230,8 +230,8 @@ twofish_enc_blk:
 	push    %edi
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
@@ -286,8 +286,8 @@ twofish_dec_blk:
 
 
 	mov	tfm + 16(%esp),	%ebp	/* abuse the base pointer: set new base bointer to the crypto tfm */
-	add	$crypto_tfm_ctx_offset, %ebp	/* ctx adress */
-	mov     in_blk+16(%esp),%edi	/* input adress in edi */
+	add	$crypto_tfm_ctx_offset, %ebp	/* ctx address */
+	mov     in_blk+16(%esp),%edi	/* input address in edi */
 
 	mov	(%edi),		%eax
 	mov	b_offset(%edi),	%ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a5..573aa10 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
 twofish_enc_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
@@ -274,11 +274,11 @@ twofish_enc_blk:
 twofish_dec_blk:
 	pushq    R1
 
-	/* %rdi contains the crypto tfm adress */
-	/* %rsi contains the output adress */
-	/* %rdx contains the input adress */
-	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx adress */
-	/* ctx adress is moved to free one non-rex register
+	/* %rdi contains the crypto tfm address */
+	/* %rsi contains the output address */
+	/* %rdx contains the input address */
+	add	$crypto_tfm_ctx_offset, %rdi	/* set ctx address */
+	/* ctx address is moved to free one non-rex register
 	as target for the 8bit high operations */
 	mov	%rdi,		%r11
 
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index f9f4724..0350311 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -21,7 +21,6 @@
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
-#include <linux/slab.h>
 #include <linux/binfmts.h>
 #include <linux/personality.h>
 #include <linux/init.h>
@@ -297,7 +296,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	 * size limits imposed on them by creating programs with large
 	 * arrays in the data or bss.
 	 */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
+	rlim = rlimit(RLIMIT_DATA);
 	if (rlim >= RLIM_INFINITY)
 		rlim = ~0;
 	if (ex.a_data + ex.a_bss > rlim)
@@ -327,7 +326,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
-	current->mm->mmap = NULL;
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 53147ad..e790bc1 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -563,7 +563,7 @@ ia32_sys_call_table:
 	.quad quiet_ni_syscall			/* old mpx syscall holder */
 	.quad sys_setpgid
 	.quad quiet_ni_syscall			/* old ulimit syscall holder */
-	.quad sys32_olduname
+	.quad sys_olduname
 	.quad sys_umask		/* 60 */
 	.quad sys_chroot
 	.quad compat_sys_ustat
@@ -586,7 +586,7 @@ ia32_sys_call_table:
 	.quad compat_sys_settimeofday
 	.quad sys_getgroups16	/* 80 */
 	.quad sys_setgroups16
-	.quad sys32_old_select
+	.quad compat_sys_old_select
 	.quad sys_symlink
 	.quad sys_lstat
 	.quad sys_readlink		/* 85 */
@@ -613,7 +613,7 @@ ia32_sys_call_table:
 	.quad compat_sys_newstat
 	.quad compat_sys_newlstat
 	.quad compat_sys_newfstat
-	.quad sys32_uname
+	.quad sys_uname
 	.quad stub32_iopl		/* 110 */
 	.quad sys_vhangup
 	.quad quiet_ni_syscall	/* old "idle" system call */
@@ -626,7 +626,7 @@ ia32_sys_call_table:
 	.quad stub32_sigreturn
 	.quad stub32_clone		/* 120 */
 	.quad sys_setdomainname
-	.quad sys_uname
+	.quad sys_newuname
 	.quad sys_modify_ldt
 	.quad compat_sys_adjtimex
 	.quad sys32_mprotect		/* 125 */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 422572c..626be15 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -40,6 +40,7 @@
 #include <linux/ptrace.h>
 #include <linux/highuid.h>
 #include <linux/sysctl.h>
+#include <linux/slab.h>
 #include <asm/mman.h>
 #include <asm/types.h>
 #include <asm/uaccess.h>
@@ -143,7 +144,7 @@ asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
  * block for parameter passing..
  */
 
-struct mmap_arg_struct {
+struct mmap_arg_struct32 {
 	unsigned int addr;
 	unsigned int len;
 	unsigned int prot;
@@ -152,9 +153,9 @@ struct mmap_arg_struct {
 	unsigned int offset;
 };
 
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg)
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *arg)
 {
-	struct mmap_arg_struct a;
+	struct mmap_arg_struct32 a;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
 		return -EFAULT;
@@ -332,24 +333,6 @@ asmlinkage long sys32_alarm(unsigned int seconds)
 	return alarm_setitimer(seconds);
 }
 
-struct sel_arg_struct {
-	unsigned int n;
-	unsigned int inp;
-	unsigned int outp;
-	unsigned int exp;
-	unsigned int tvp;
-};
-
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	return compat_sys_select(a.n, compat_ptr(a.inp), compat_ptr(a.outp),
-				 compat_ptr(a.exp), compat_ptr(a.tvp));
-}
-
 asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr,
 			      int options)
 {
@@ -466,58 +449,6 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd,
 	return ret;
 }
 
-asmlinkage long sys32_olduname(struct oldold_utsname __user *name)
-{
-	char *arch = "x86_64";
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	err = __copy_to_user(&name->sysname, &utsname()->sysname,
-			     __OLD_UTS_LEN);
-	err |= __put_user(0, name->sysname+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->nodename, &utsname()->nodename,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->nodename+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->release, &utsname()->release,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->release+__OLD_UTS_LEN);
-	err |= __copy_to_user(&name->version, &utsname()->version,
-			      __OLD_UTS_LEN);
-	err |= __put_user(0, name->version+__OLD_UTS_LEN);
-
-	if (personality(current->personality) == PER_LINUX32)
-		arch = "i686";
-
-	err |= __copy_to_user(&name->machine, arch, strlen(arch) + 1);
-
-	up_read(&uts_sem);
-
-	err = err ? -EFAULT : 0;
-
-	return err;
-}
-
-long sys32_uname(struct old_utsname __user *name)
-{
-	int err;
-
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-
-	return err ? -EFAULT : 0;
-}
-
 asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 			     compat_uptr_t __user *envp, struct pt_regs *regs)
 {
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 9f828f8..493092e 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -11,6 +11,7 @@ header-y += sigcontext32.h
 header-y += ucontext.h
 header-y += processor-flags.h
 header-y += hw_breakpoint.h
+header-y += hyperv.h
 
 unifdef-y += e820.h
 unifdef-y += ist.h
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 56f462c..aa2c39d 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -85,7 +85,6 @@ extern int acpi_ioapic;
 extern int acpi_noirq;
 extern int acpi_strict;
 extern int acpi_disabled;
-extern int acpi_ht;
 extern int acpi_pci_disabled;
 extern int acpi_skip_timer_override;
 extern int acpi_use_timer_override;
@@ -97,7 +96,6 @@ void acpi_pic_sci_set_trigger(unsigned int, u16);
 static inline void disable_acpi(void)
 {
 	acpi_disabled = 1;
-	acpi_ht = 0;
 	acpi_pci_disabled = 1;
 	acpi_noirq = 1;
 }
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index b97f786..a63a68b 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -6,8 +6,8 @@
 	.macro LOCK_PREFIX
 1:	lock
 	.section .smp_locks,"a"
-	_ASM_ALIGN
-	_ASM_PTR 1b
+	.balign 4
+	.long 1b - .
 	.previous
 	.endm
 #else
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 69b74a7..03b6bb5 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -28,20 +28,20 @@
  */
 
 #ifdef CONFIG_SMP
-#define LOCK_PREFIX \
+#define LOCK_PREFIX_HERE \
 		".section .smp_locks,\"a\"\n"	\
-		_ASM_ALIGN "\n"			\
-		_ASM_PTR "661f\n" /* address */	\
+		".balign 4\n"			\
+		".long 671f - .\n" /* offset */	\
 		".previous\n"			\
-		"661:\n\tlock; "
+		"671:"
+
+#define LOCK_PREFIX LOCK_PREFIX_HERE "\n\tlock; "
 
 #else /* ! CONFIG_SMP */
+#define LOCK_PREFIX_HERE ""
 #define LOCK_PREFIX ""
 #endif
 
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
@@ -65,12 +65,17 @@ extern void alternatives_smp_module_add(struct module *mod, char *name,
 					void *text, void *text_end);
 extern void alternatives_smp_module_del(struct module *mod);
 extern void alternatives_smp_switch(int smp);
+extern int alternatives_text_reserved(void *start, void *end);
 #else
 static inline void alternatives_smp_module_add(struct module *mod, char *name,
 					       void *locks, void *locks_end,
 					       void *text, void *text_end) {}
 static inline void alternatives_smp_module_del(struct module *mod) {}
 static inline void alternatives_smp_switch(int smp) {}
+static inline int alternatives_text_reserved(void *start, void *end)
+{
+	return 0;
+}
 #endif	/* CONFIG_SMP */
 
 /* alternative assembly primitive: */
@@ -91,6 +96,12 @@ static inline void alternatives_smp_switch(int smp) {}
       ".previous"
 
 /*
+ * This must be included *after* the definition of ALTERNATIVE due to
+ * <asm/arch_hweight.h>
+ */
+#include <asm/cpufeature.h>
+
+/*
  * Alternative instructions for different CPU types or capabilities.
  *
  * This allows to use optimized instructions even on generic binary
@@ -125,11 +136,16 @@ static inline void alternatives_smp_switch(int smp) {}
 	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature)		\
 		: output : "i" (0), ## input)
 
+/* Like alternative_io, but for replacing a direct call with another one. */
+#define alternative_call(oldfunc, newfunc, feature, output, input...)	\
+	asm volatile (ALTERNATIVE("call %P[old]", "call %P[new]", feature) \
+		: output : [old] "i" (oldfunc), [new] "i" (newfunc), ## input)
+
 /*
  * use this macro(s) if you need more than one output parameter
  * in alternative_io
  */
-#define ASM_OUTPUT2(a, b) a, b
+#define ASM_OUTPUT2(a...) a
 
 struct paravirt_patch_site;
 #ifdef CONFIG_PARAVIRT
@@ -155,10 +171,12 @@ static inline void apply_paravirt(struct paravirt_patch_site *start,
  * invalid instruction possible) or if the instructions are changed from a
  * consistent state to another consistent state atomically.
  * More care must be taken when modifying code in the SMP case because of
- * Intel's errata.
+ * Intel's errata. text_poke_smp() takes care that errata, but still
+ * doesn't support NMI/MCE handler code modifying.
  * On the local CPU you need to be protected again NMI or MCE handlers seeing an
  * inconsistent instruction while you patch.
  */
 extern void *text_poke(void *addr, const void *opcode, size_t len);
+extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
 
 #endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index 4d817f9..d2544f1 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -31,6 +31,7 @@ extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
 extern int amd_iommu_init_devices(void);
 extern void amd_iommu_uninit_devices(void);
 extern void amd_iommu_init_notifier(void);
+extern void amd_iommu_init_api(void);
 #ifndef CONFIG_AMD_IOMMU_STATS
 
 static inline void amd_iommu_stats_init(void) { }
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index ba19ad4..7014e88 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -21,6 +21,7 @@
 #define _ASM_X86_AMD_IOMMU_TYPES_H
 
 #include <linux/types.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
@@ -140,6 +141,7 @@
 
 /* constants to configure the command buffer */
 #define CMD_BUFFER_SIZE    8192
+#define CMD_BUFFER_UNINITIALIZED 1
 #define CMD_BUFFER_ENTRIES 512
 #define MMIO_CMD_SIZE_SHIFT 56
 #define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
@@ -172,6 +174,40 @@
 				(~((1ULL << (12 + ((lvl) * 9))) - 1)))
 #define PM_ALIGNED(lvl, addr)	((PM_MAP_MASK(lvl) & (addr)) == (addr))
 
+/*
+ * Returns the page table level to use for a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_LEVEL(pagesize) \
+		((__ffs(pagesize) - 12) / 9)
+/*
+ * Returns the number of ptes to use for a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_PTE_COUNT(pagesize) \
+		(1ULL << ((__ffs(pagesize) - 12) % 9))
+
+/*
+ * Aligns a given io-virtual address to a given page size
+ * Pagesize is expected to be a power-of-two
+ */
+#define PAGE_SIZE_ALIGN(address, pagesize) \
+		((address) & ~((pagesize) - 1))
+/*
+ * Creates an IOMMU PTE for an address an a given pagesize
+ * The PTE has no permission bits set
+ * Pagesize is expected to be a power-of-two larger than 4096
+ */
+#define PAGE_SIZE_PTE(address, pagesize)		\
+		(((address) | ((pagesize) - 1)) &	\
+		 (~(pagesize >> 1)) & PM_ADDR_MASK)
+
+/*
+ * Takes a PTE value with mode=0x07 and returns the page size it maps
+ */
+#define PTE_PAGE_SIZE(pte) \
+	(1ULL << (1 + ffz(((pte) | 0xfffULL))))
+
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)
@@ -237,6 +273,7 @@ struct protection_domain {
 	struct list_head list;  /* for list of all protection domains */
 	struct list_head dev_list; /* List of all devices in this domain */
 	spinlock_t lock;	/* mostly used to lock the page table*/
+	struct mutex api_lock;	/* protect page tables in the iommu-api path */
 	u16 id;			/* the domain id written to the device table */
 	int mode;		/* paging mode (0-6 levels) */
 	u64 *pt_root;		/* page table root pointer */
diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
new file mode 100644
index 0000000..c74a2ee
--- /dev/null
+++ b/arch/x86/include/asm/apb_timer.h
@@ -0,0 +1,70 @@
+/*
+ * apb_timer.h: Driver for Langwell APB timer based on Synopsis DesignWare
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ */
+
+#ifndef ASM_X86_APBT_H
+#define ASM_X86_APBT_H
+#include <linux/sfi.h>
+
+#ifdef CONFIG_APB_TIMER
+
+/* Langwell DW APB timer registers */
+#define APBTMR_N_LOAD_COUNT    0x00
+#define APBTMR_N_CURRENT_VALUE 0x04
+#define APBTMR_N_CONTROL       0x08
+#define APBTMR_N_EOI           0x0c
+#define APBTMR_N_INT_STATUS    0x10
+
+#define APBTMRS_INT_STATUS     0xa0
+#define APBTMRS_EOI            0xa4
+#define APBTMRS_RAW_INT_STATUS 0xa8
+#define APBTMRS_COMP_VERSION   0xac
+#define APBTMRS_REG_SIZE       0x14
+
+/* register bits */
+#define APBTMR_CONTROL_ENABLE  (1<<0)
+#define APBTMR_CONTROL_MODE_PERIODIC   (1<<1) /*1: periodic 0:free running */
+#define APBTMR_CONTROL_INT     (1<<2)
+
+/* default memory mapped register base */
+#define LNW_SCU_ADDR           0xFF100000
+#define LNW_EXT_TIMER_OFFSET   0x1B800
+#define APBT_DEFAULT_BASE      (LNW_SCU_ADDR+LNW_EXT_TIMER_OFFSET)
+#define LNW_EXT_TIMER_PGOFFSET         0x800
+
+/* APBT clock speed range from PCLK to fabric base, 25-100MHz */
+#define APBT_MAX_FREQ          50
+#define APBT_MIN_FREQ          1
+#define APBT_MMAP_SIZE         1024
+
+#define APBT_DEV_USED  1
+
+extern void apbt_time_init(void);
+extern struct clock_event_device *global_clock_event;
+extern unsigned long apbt_quick_calibrate(void);
+extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
+extern void apbt_setup_secondary_clock(void);
+extern unsigned int boot_cpu_id;
+extern int disable_apbt_percpu;
+
+extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
+extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
+extern int sfi_mtimer_num;
+
+#else /* CONFIG_APB_TIMER */
+
+static inline unsigned long apbt_quick_calibrate(void) {return 0; }
+static inline void apbt_time_init(void) {return 0; }
+
+#endif
+#endif /* ASM_X86_APBT_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index b4ac2cd..1fa03e0 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -373,6 +373,7 @@ extern atomic_t init_deasserted;
 extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
 #endif
 
+#ifdef CONFIG_X86_LOCAL_APIC
 static inline u32 apic_read(u32 reg)
 {
 	return apic->read(reg);
@@ -403,10 +404,19 @@ static inline u32 safe_apic_wait_icr_idle(void)
 	return apic->safe_wait_icr_idle();
 }
 
+#else /* CONFIG_X86_LOCAL_APIC */
+
+static inline u32 apic_read(u32 reg) { return 0; }
+static inline void apic_write(u32 reg, u32 val) { }
+static inline u64 apic_icr_read(void) { return 0; }
+static inline void apic_icr_write(u32 low, u32 high) { }
+static inline void apic_wait_icr_idle(void) { }
+static inline u32 safe_apic_wait_icr_idle(void) { return 0; }
+
+#endif /* CONFIG_X86_LOCAL_APIC */
 
 static inline void ack_APIC_irq(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	/*
 	 * ack_APIC_irq() actually gets compiled as a single instruction
 	 * ... yummie.
@@ -414,7 +424,6 @@ static inline void ack_APIC_irq(void)
 
 	/* Docs say use 0 for future compatibility */
 	apic_write(APIC_EOI, 0);
-#endif
 }
 
 static inline unsigned default_get_apic_id(unsigned long x)
diff --git a/arch/x86/include/asm/arch_hweight.h b/arch/x86/include/asm/arch_hweight.h
new file mode 100644
index 0000000..9686c3d
--- /dev/null
+++ b/arch/x86/include/asm/arch_hweight.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_HWEIGHT_H
+#define _ASM_X86_HWEIGHT_H
+
+#ifdef CONFIG_64BIT
+/* popcnt %edi, %eax -- redundant REX prefix for alignment */
+#define POPCNT32 ".byte 0xf3,0x40,0x0f,0xb8,0xc7"
+/* popcnt %rdi, %rax */
+#define POPCNT64 ".byte 0xf3,0x48,0x0f,0xb8,0xc7"
+#define REG_IN "D"
+#define REG_OUT "a"
+#else
+/* popcnt %eax, %eax */
+#define POPCNT32 ".byte 0xf3,0x0f,0xb8,0xc0"
+#define REG_IN "a"
+#define REG_OUT "a"
+#endif
+
+/*
+ * __sw_hweightXX are called from within the alternatives below
+ * and callee-clobbered registers need to be taken care of. See
+ * ARCH_HWEIGHT_CFLAGS in <arch/x86/Kconfig> for the respective
+ * compiler switches.
+ */
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	unsigned int res = 0;
+
+	asm (ALTERNATIVE("call __sw_hweight32", POPCNT32, X86_FEATURE_POPCNT)
+		     : "="REG_OUT (res)
+		     : REG_IN (w));
+
+	return res;
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __arch_hweight32(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __arch_hweight32(w & 0xff);
+}
+
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	unsigned long res = 0;
+
+#ifdef CONFIG_X86_32
+	return  __arch_hweight32((u32)w) +
+		__arch_hweight32((u32)(w >> 32));
+#else
+	asm (ALTERNATIVE("call __sw_hweight64", POPCNT64, X86_FEATURE_POPCNT)
+		     : "="REG_OUT (res)
+		     : REG_IN (w));
+#endif /* CONFIG_X86_32 */
+
+	return res;
+}
+
+#endif
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index 4e1b887..952a826 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -1,5 +1,323 @@
+#ifndef _ASM_X86_ATOMIC_H
+#define _ASM_X86_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/alternative.h>
+#include <asm/cmpxchg.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+	return (*(volatile int *)&(v)->counter);
+}
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "addl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "subl %1,%0"
+		     : "+m" (v->counter)
+		     : "ir" (i));
+}
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic_inc(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "incl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic_dec(atomic_t *v)
+{
+	asm volatile(LOCK_PREFIX "decl %0"
+		     : "+m" (v->counter));
+}
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incl %0; sete %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+		     : "+m" (v->counter), "=qm" (c)
+		     : "ir" (i) : "memory");
+	return c;
+}
+
+/**
+ * atomic_add_return - add integer and return
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int __i;
+#ifdef CONFIG_M386
+	unsigned long flags;
+	if (unlikely(boot_cpu_data.x86 <= 3))
+		goto no_xadd;
+#endif
+	/* Modern 486+ processor */
+	__i = i;
+	asm volatile(LOCK_PREFIX "xaddl %0, %1"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+
+#ifdef CONFIG_M386
+no_xadd: /* Legacy 386 processor */
+	raw_local_irq_save(flags);
+	__i = atomic_read(v);
+	atomic_set(v, i + __i);
+	raw_local_irq_restore(flags);
+	return i + __i;
+#endif
+}
+
+/**
+ * atomic_sub_return - subtract integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to subtract
+ *
+ * Atomically subtracts @i from @v and returns @v - @i
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	return atomic_add_return(-i, v);
+}
+
+#define atomic_inc_return(v)  (atomic_add_return(1, v))
+#define atomic_dec_return(v)  (atomic_sub_return(1, v))
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline int atomic_dec_if_positive(atomic_t *v)
+{
+	int c, old, dec;
+	c = atomic_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
+/**
+ * atomic_inc_short - increment of a short integer
+ * @v: pointer to type int
+ *
+ * Atomically adds 1 to @v
+ * Returns the new value of @u
+ */
+static inline short int atomic_inc_short(short int *v)
+{
+	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
+	return *v;
+}
+
+#ifdef CONFIG_X86_64
+/**
+ * atomic_or_long - OR of two long integers
+ * @v1: pointer to type unsigned long
+ * @v2: pointer to type unsigned long
+ *
+ * Atomically ORs @v1 and @v2
+ * Returns the result of the OR
+ */
+static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
+{
+	asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
+}
+#endif
+
+/* These are x86-specific, used by some header files */
+#define atomic_clear_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "andl %0,%1"			\
+		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
+
+#define atomic_set_mask(mask, addr)				\
+	asm volatile(LOCK_PREFIX "orl %0,%1"			\
+		     : : "r" ((unsigned)(mask)), "m" (*(addr))	\
+		     : "memory")
+
+/* Atomic operations are already serializing on x86 */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
 #ifdef CONFIG_X86_32
-# include "atomic_32.h"
+# include "atomic64_32.h"
 #else
-# include "atomic_64.h"
+# include "atomic64_64.h"
 #endif
+
+#include <asm-generic/atomic-long.h>
+#endif /* _ASM_X86_ATOMIC_H */
diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h
new file mode 100644
index 0000000..2a934aa
--- /dev/null
+++ b/arch/x86/include/asm/atomic64_32.h
@@ -0,0 +1,304 @@
+#ifndef _ASM_X86_ATOMIC64_32_H
+#define _ASM_X86_ATOMIC64_32_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/processor.h>
+//#include <asm/cmpxchg.h>
+
+/* An 64bit atomic type */
+
+typedef struct {
+	u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(val)	{ (val) }
+
+#ifdef CONFIG_X86_CMPXCHG64
+#define ATOMIC64_ALTERNATIVE_(f, g) "call atomic64_" #g "_cx8"
+#else
+#define ATOMIC64_ALTERNATIVE_(f, g) ALTERNATIVE("call atomic64_" #f "_386", "call atomic64_" #g "_cx8", X86_FEATURE_CX8)
+#endif
+
+#define ATOMIC64_ALTERNATIVE(f) ATOMIC64_ALTERNATIVE_(f, f)
+
+/**
+ * atomic64_cmpxchg - cmpxchg atomic64 variable
+ * @p: pointer to type atomic64_t
+ * @o: expected value
+ * @n: new value
+ *
+ * Atomically sets @v to @n if it was equal to @o and returns
+ * the old value.
+ */
+
+static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
+{
+	return cmpxchg64(&v->counter, o, n);
+}
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @n: value to assign
+ *
+ * Atomically xchgs the value of @v to @n and returns
+ * the old value.
+ */
+static inline long long atomic64_xchg(atomic64_t *v, long long n)
+{
+	long long o;
+	unsigned high = (unsigned)(n >> 32);
+	unsigned low = (unsigned)n;
+	asm volatile(ATOMIC64_ALTERNATIVE(xchg)
+		     : "=A" (o), "+b" (low), "+c" (high)
+		     : "S" (v)
+		     : "memory"
+		     );
+	return o;
+}
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @n: value to assign
+ *
+ * Atomically sets the value of @v to @n.
+ */
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	unsigned high = (unsigned)(i >> 32);
+	unsigned low = (unsigned)i;
+	asm volatile(ATOMIC64_ALTERNATIVE(set)
+		     : "+b" (low), "+c" (high)
+		     : "S" (v)
+		     : "eax", "edx", "memory"
+		     );
+}
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically reads the value of @v and returns it.
+ */
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long r;
+	asm volatile(ATOMIC64_ALTERNATIVE(read)
+		     : "=A" (r), "+c" (v)
+		     : : "memory"
+		     );
+	return r;
+ }
+
+/**
+ * atomic64_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns @i + *@v
+ */
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE(add_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
+
+/*
+ * Other variants with different arithmetic operators:
+ */
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE(sub_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
+
+static inline long long atomic64_inc_return(atomic64_t *v)
+{
+	long long a;
+	asm volatile(ATOMIC64_ALTERNATIVE(inc_return)
+		     : "=A" (a)
+		     : "S" (v)
+		     : "memory", "ecx"
+		     );
+	return a;
+}
+
+static inline long long atomic64_dec_return(atomic64_t *v)
+{
+	long long a;
+	asm volatile(ATOMIC64_ALTERNATIVE(dec_return)
+		     : "=A" (a)
+		     : "S" (v)
+		     : "memory", "ecx"
+		     );
+	return a;
+}
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline long long atomic64_add(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(add, add_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline long long atomic64_sub(long long i, atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(sub, sub_return)
+		     : "+A" (i), "+c" (v)
+		     : : "memory"
+		     );
+	return i;
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+  *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_sub_and_test(long long i, atomic64_t *v)
+{
+	return atomic64_sub_return(i, v) == 0;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic64_inc(atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(inc, inc_return)
+		     : : "S" (v)
+		     : "memory", "eax", "ecx", "edx"
+		     );
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+static inline void atomic64_dec(atomic64_t *v)
+{
+	asm volatile(ATOMIC64_ALTERNATIVE_(dec, dec_return)
+		     : : "S" (v)
+		     : "memory", "eax", "ecx", "edx"
+		     );
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic64_dec_and_test(atomic64_t *v)
+{
+	return atomic64_dec_return(v) == 0;
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_inc_and_test(atomic64_t *v)
+{
+	return atomic64_inc_return(v) == 0;
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+{
+	unsigned low = (unsigned)u;
+	unsigned high = (unsigned)(u >> 32);
+	asm volatile(ATOMIC64_ALTERNATIVE(add_unless) "\n\t"
+		     : "+A" (a), "+c" (v), "+S" (low), "+D" (high)
+		     : : "memory");
+	return (int)a;
+}
+
+
+static inline int atomic64_inc_not_zero(atomic64_t *v)
+{
+	int r;
+	asm volatile(ATOMIC64_ALTERNATIVE(inc_not_zero)
+		     : "=a" (r)
+		     : "S" (v)
+		     : "ecx", "edx", "memory"
+		     );
+	return r;
+}
+
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long r;
+	asm volatile(ATOMIC64_ALTERNATIVE(dec_if_positive)
+		     : "=A" (r)
+		     : "S" (v)
+		     : "ecx", "memory"
+		     );
+	return r;
+}
+
+#undef ATOMIC64_ALTERNATIVE
+#undef ATOMIC64_ALTERNATIVE_
+
+#endif /* _ASM_X86_ATOMIC64_32_H */
diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h
new file mode 100644
index 0000000..49fd1ea
--- /dev/null
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -0,0 +1,247 @@
+#ifndef _ASM_X86_ATOMIC64_64_H
+#define _ASM_X86_ATOMIC64_64_H
+
+#include <linux/types.h>
+#include <asm/alternative.h>
+#include <asm/cmpxchg.h>
+
+/* The 64-bit atomic type */
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ * Doesn't imply a read memory barrier.
+ */
+static inline long atomic64_read(const atomic64_t *v)
+{
+	return (*(volatile long *)&(v)->counter);
+}
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @v: pointer to type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+	v->counter = i;
+}
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic64_add(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "addq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static inline void atomic64_sub(long i, atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "subq %1,%0"
+		     : "=m" (v->counter)
+		     : "er" (i), "m" (v->counter));
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_sub_and_test(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+static inline void atomic64_inc(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "incq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+static inline void atomic64_dec(atomic64_t *v)
+{
+	asm volatile(LOCK_PREFIX "decq %0"
+		     : "=m" (v->counter)
+		     : "m" (v->counter));
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+static inline int atomic64_dec_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "decq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+static inline int atomic64_inc_and_test(atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "incq %0; sete %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "m" (v->counter) : "memory");
+	return c != 0;
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+static inline int atomic64_add_negative(long i, atomic64_t *v)
+{
+	unsigned char c;
+
+	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
+		     : "=m" (v->counter), "=qm" (c)
+		     : "er" (i), "m" (v->counter) : "memory");
+	return c;
+}
+
+/**
+ * atomic64_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer to type atomic64_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline long atomic64_add_return(long i, atomic64_t *v)
+{
+	long __i = i;
+	asm volatile(LOCK_PREFIX "xaddq %0, %1;"
+		     : "+r" (i), "+m" (v->counter)
+		     : : "memory");
+	return i + __i;
+}
+
+static inline long atomic64_sub_return(long i, atomic64_t *v)
+{
+	return atomic64_add_return(-i, v);
+}
+
+#define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
+#define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
+
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+	return xchg(&v->counter, new);
+}
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long c, old, dec;
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
+#endif /* _ASM_X86_ATOMIC64_64_H */
diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
deleted file mode 100644
index dc5a667..0000000
--- a/arch/x86/include/asm/atomic_32.h
+++ /dev/null
@@ -1,415 +0,0 @@
-#ifndef _ASM_X86_ATOMIC_32_H
-#define _ASM_X86_ATOMIC_32_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/processor.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.
- */
-static inline int atomic_read(const atomic_t *v)
-{
-	return v->counter;
-}
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	v->counter = i;
-}
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "addl %1,%0"
-		     : "+m" (v->counter)
-		     : "ir" (i));
-}
-
-/**
- * atomic_sub - subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "subl %1,%0"
-		     : "+m" (v->counter)
-		     : "ir" (i));
-}
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic_inc(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "incl %0"
-		     : "+m" (v->counter));
-}
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic_dec(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "decl %0"
-		     : "+m" (v->counter));
-}
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic_dec_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_inc_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incl %0; sete %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_add_negative - add and test if negative
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
-		     : "+m" (v->counter), "=qm" (c)
-		     : "ir" (i) : "memory");
-	return c;
-}
-
-/**
- * atomic_add_return - add integer and return
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int __i;
-#ifdef CONFIG_M386
-	unsigned long flags;
-	if (unlikely(boot_cpu_data.x86 <= 3))
-		goto no_xadd;
-#endif
-	/* Modern 486+ processor */
-	__i = i;
-	asm volatile(LOCK_PREFIX "xaddl %0, %1"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-
-#ifdef CONFIG_M386
-no_xadd: /* Legacy 386 processor */
-	local_irq_save(flags);
-	__i = atomic_read(v);
-	atomic_set(v, i + __i);
-	local_irq_restore(flags);
-	return i + __i;
-#endif
-}
-
-/**
- * atomic_sub_return - subtract integer and return
- * @v: pointer of type atomic_t
- * @i: integer value to subtract
- *
- * Atomically subtracts @i from @v and returns @v - @i
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	return cmpxchg(&v->counter, old, new);
-}
-
-static inline int atomic_xchg(atomic_t *v, int new)
-{
-	return xchg(&v->counter, new);
-}
-
-/**
- * atomic_add_unless - add unless the number is already a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as @v was not already @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#define atomic_inc_return(v)  (atomic_add_return(1, v))
-#define atomic_dec_return(v)  (atomic_sub_return(1, v))
-
-/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr)				\
-	asm volatile(LOCK_PREFIX "andl %0,%1"			\
-		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
-
-#define atomic_set_mask(mask, addr)				\
-	asm volatile(LOCK_PREFIX "orl %0,%1"				\
-		     : : "r" (mask), "m" (*(addr)) : "memory")
-
-/* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-/* An 64bit atomic type */
-
-typedef struct {
-	u64 __aligned(8) counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(val)	{ (val) }
-
-extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
-
-/**
- * atomic64_xchg - xchg atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
- *
- * Atomically xchgs the value of @ptr to @new_val and returns
- * the old value.
- */
-extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
-
-/**
- * atomic64_set - set atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
- *
- * Atomically sets the value of @ptr to @new_val.
- */
-extern void atomic64_set(atomic64_t *ptr, u64 new_val);
-
-/**
- * atomic64_read - read atomic64 variable
- * @ptr:      pointer to type atomic64_t
- *
- * Atomically reads the value of @ptr and returns it.
- */
-static inline u64 atomic64_read(atomic64_t *ptr)
-{
-	u64 res;
-
-	/*
-	 * Note, we inline this atomic64_t primitive because
-	 * it only clobbers EAX/EDX and leaves the others
-	 * untouched. We also (somewhat subtly) rely on the
-	 * fact that cmpxchg8b returns the current 64-bit value
-	 * of the memory location we are touching:
-	 */
-	asm volatile(
-		"mov %%ebx, %%eax\n\t"
-		"mov %%ecx, %%edx\n\t"
-		LOCK_PREFIX "cmpxchg8b %1\n"
-			: "=&A" (res)
-			: "m" (*ptr)
-		);
-
-	return res;
-}
-
-extern u64 atomic64_read(atomic64_t *ptr);
-
-/**
- * atomic64_add_return - add and return
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr and returns @delta + *@ptr
- */
-extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
-
-/*
- * Other variants with different arithmetic operators:
- */
-extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
-extern u64 atomic64_inc_return(atomic64_t *ptr);
-extern u64 atomic64_dec_return(atomic64_t *ptr);
-
-/**
- * atomic64_add - add integer to atomic64 variable
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr.
- */
-extern void atomic64_add(u64 delta, atomic64_t *ptr);
-
-/**
- * atomic64_sub - subtract the atomic64 variable
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically subtracts @delta from @ptr.
- */
-extern void atomic64_sub(u64 delta, atomic64_t *ptr);
-
-/**
- * atomic64_sub_and_test - subtract value from variable and test result
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically subtracts @delta from @ptr and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
-
-/**
- * atomic64_inc - increment atomic64 variable
- * @ptr: pointer to type atomic64_t
- *
- * Atomically increments @ptr by 1.
- */
-extern void atomic64_inc(atomic64_t *ptr);
-
-/**
- * atomic64_dec - decrement atomic64 variable
- * @ptr: pointer to type atomic64_t
- *
- * Atomically decrements @ptr by 1.
- */
-extern void atomic64_dec(atomic64_t *ptr);
-
-/**
- * atomic64_dec_and_test - decrement and test
- * @ptr: pointer to type atomic64_t
- *
- * Atomically decrements @ptr by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-extern int atomic64_dec_and_test(atomic64_t *ptr);
-
-/**
- * atomic64_inc_and_test - increment and test
- * @ptr: pointer to type atomic64_t
- *
- * Atomically increments @ptr by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-extern int atomic64_inc_and_test(atomic64_t *ptr);
-
-/**
- * atomic64_add_negative - add and test if negative
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
-
-#include <asm-generic/atomic-long.h>
-#endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
deleted file mode 100644
index d605dc2..0000000
--- a/arch/x86/include/asm/atomic_64.h
+++ /dev/null
@@ -1,485 +0,0 @@
-#ifndef _ASM_X86_ATOMIC_64_H
-#define _ASM_X86_ATOMIC_64_H
-
-#include <linux/types.h>
-#include <asm/alternative.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.
- */
-static inline int atomic_read(const atomic_t *v)
-{
-	return v->counter;
-}
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	v->counter = i;
-}
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "addl %1,%0"
-		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub - subtract the atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "subl %1,%0"
-		     : "=m" (v->counter)
-		     : "ir" (i), "m" (v->counter));
-}
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_sub_and_test(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic_inc(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "incl %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic_dec(atomic_t *v)
-{
-	asm volatile(LOCK_PREFIX "decl %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic_dec_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decl %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic_inc_and_test(atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incl %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic_add_negative - add and test if negative
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "ir" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	int __i = i;
-	asm volatile(LOCK_PREFIX "xaddl %0, %1"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
-
-#define atomic_inc_return(v)  (atomic_add_return(1, v))
-#define atomic_dec_return(v)  (atomic_sub_return(1, v))
-
-/* The 64-bit atomic type */
-
-#define ATOMIC64_INIT(i)	{ (i) }
-
-/**
- * atomic64_read - read atomic64 variable
- * @v: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-static inline long atomic64_read(const atomic64_t *v)
-{
-	return v->counter;
-}
-
-/**
- * atomic64_set - set atomic64 variable
- * @v: pointer to type atomic64_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-static inline void atomic64_set(atomic64_t *v, long i)
-{
-	v->counter = i;
-}
-
-/**
- * atomic64_add - add integer to atomic64 variable
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v.
- */
-static inline void atomic64_add(long i, atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "addq %1,%0"
-		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
-}
-
-/**
- * atomic64_sub - subtract the atomic64 variable
- * @i: integer value to subtract
- * @v: pointer to type atomic64_t
- *
- * Atomically subtracts @i from @v.
- */
-static inline void atomic64_sub(long i, atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "subq %1,%0"
-		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
-}
-
-/**
- * atomic64_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer to type atomic64_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic64_sub_and_test(long i, atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic64_inc - increment atomic64 variable
- * @v: pointer to type atomic64_t
- *
- * Atomically increments @v by 1.
- */
-static inline void atomic64_inc(atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "incq %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic64_dec - decrement atomic64 variable
- * @v: pointer to type atomic64_t
- *
- * Atomically decrements @v by 1.
- */
-static inline void atomic64_dec(atomic64_t *v)
-{
-	asm volatile(LOCK_PREFIX "decq %0"
-		     : "=m" (v->counter)
-		     : "m" (v->counter));
-}
-
-/**
- * atomic64_dec_and_test - decrement and test
- * @v: pointer to type atomic64_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-static inline int atomic64_dec_and_test(atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "decq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic64_inc_and_test - increment and test
- * @v: pointer to type atomic64_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-static inline int atomic64_inc_and_test(atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "incq %0; sete %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "m" (v->counter) : "memory");
-	return c != 0;
-}
-
-/**
- * atomic64_add_negative - add and test if negative
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-static inline int atomic64_add_negative(long i, atomic64_t *v)
-{
-	unsigned char c;
-
-	asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
-		     : "=m" (v->counter), "=qm" (c)
-		     : "er" (i), "m" (v->counter) : "memory");
-	return c;
-}
-
-/**
- * atomic64_add_return - add and return
- * @i: integer value to add
- * @v: pointer to type atomic64_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline long atomic64_add_return(long i, atomic64_t *v)
-{
-	long __i = i;
-	asm volatile(LOCK_PREFIX "xaddq %0, %1;"
-		     : "+r" (i), "+m" (v->counter)
-		     : : "memory");
-	return i + __i;
-}
-
-static inline long atomic64_sub_return(long i, atomic64_t *v)
-{
-	return atomic64_add_return(-i, v);
-}
-
-#define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
-#define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
-
-static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
-{
-	return cmpxchg(&v->counter, old, new);
-}
-
-static inline long atomic64_xchg(atomic64_t *v, long new)
-{
-	return xchg(&v->counter, new);
-}
-
-static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	return cmpxchg(&v->counter, old, new);
-}
-
-static inline long atomic_xchg(atomic_t *v, int new)
-{
-	return xchg(&v->counter, new);
-}
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/**
- * atomic64_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
-{
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
-}
-
-/**
- * atomic_inc_short - increment of a short integer
- * @v: pointer to type int
- *
- * Atomically adds 1 to @v
- * Returns the new value of @u
- */
-static inline short int atomic_inc_short(short int *v)
-{
-	asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v));
-	return *v;
-}
-
-/**
- * atomic_or_long - OR of two long integers
- * @v1: pointer to type unsigned long
- * @v2: pointer to type unsigned long
- *
- * Atomically ORs @v1 and @v2
- * Returns the result of the OR
- */
-static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
-{
-	asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2));
-}
-
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr)					\
-	asm volatile(LOCK_PREFIX "andl %0,%1"				\
-		     : : "r" (~(mask)), "m" (*(addr)) : "memory")
-
-#define atomic_set_mask(mask, addr)					\
-	asm volatile(LOCK_PREFIX "orl %0,%1"				\
-		     : : "r" ((unsigned)(mask)), "m" (*(addr))		\
-		     : "memory")
-
-/* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-#endif /* _ASM_X86_ATOMIC_64_H */
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 02b47a6..545776e 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -444,7 +444,9 @@ static inline int fls(int x)
 
 #define ARCH_HAS_FAST_MULTIPLIER 1
 
-#include <asm-generic/bitops/hweight.h>
+#include <asm/arch_hweight.h>
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 7a10659..3b62ab5 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -24,7 +24,7 @@
 #define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
 
 #if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
-	(CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+	(CONFIG_PHYSICAL_ALIGN < MIN_KERNEL_ALIGN)
 #error "Invalid value for CONFIG_PHYSICAL_ALIGN"
 #endif
 
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 634c40a..63e35ec 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -44,9 +44,6 @@ static inline void copy_from_user_page(struct vm_area_struct *vma,
 	memcpy(dst, src, len);
 }
 
-#define PG_WC				PG_arch_1
-PAGEFLAG(WC, WC)
-
 #ifdef CONFIG_X86_PAT
 /*
  * X86 PAT uses page flags WC and Uncached together to keep track of
@@ -55,16 +52,24 @@ PAGEFLAG(WC, WC)
  * _PAGE_CACHE_UC_MINUS and fourth state where page's memory type has not
  * been changed from its default (value of -1 used to denote this).
  * Note we do not support _PAGE_CACHE_UC here.
- *
- * Caller must hold memtype_lock for atomicity.
  */
+
+#define _PGMT_DEFAULT		0
+#define _PGMT_WC		(1UL << PG_arch_1)
+#define _PGMT_UC_MINUS		(1UL << PG_uncached)
+#define _PGMT_WB		(1UL << PG_uncached | 1UL << PG_arch_1)
+#define _PGMT_MASK		(1UL << PG_uncached | 1UL << PG_arch_1)
+#define _PGMT_CLEAR_MASK	(~_PGMT_MASK)
+
 static inline unsigned long get_page_memtype(struct page *pg)
 {
-	if (!PageUncached(pg) && !PageWC(pg))
+	unsigned long pg_flags = pg->flags & _PGMT_MASK;
+
+	if (pg_flags == _PGMT_DEFAULT)
 		return -1;
-	else if (!PageUncached(pg) && PageWC(pg))
+	else if (pg_flags == _PGMT_WC)
 		return _PAGE_CACHE_WC;
-	else if (PageUncached(pg) && !PageWC(pg))
+	else if (pg_flags == _PGMT_UC_MINUS)
 		return _PAGE_CACHE_UC_MINUS;
 	else
 		return _PAGE_CACHE_WB;
@@ -72,25 +77,26 @@ static inline unsigned long get_page_memtype(struct page *pg)
 
 static inline void set_page_memtype(struct page *pg, unsigned long memtype)
 {
+	unsigned long memtype_flags = _PGMT_DEFAULT;
+	unsigned long old_flags;
+	unsigned long new_flags;
+
 	switch (memtype) {
 	case _PAGE_CACHE_WC:
-		ClearPageUncached(pg);
-		SetPageWC(pg);
+		memtype_flags = _PGMT_WC;
 		break;
 	case _PAGE_CACHE_UC_MINUS:
-		SetPageUncached(pg);
-		ClearPageWC(pg);
+		memtype_flags = _PGMT_UC_MINUS;
 		break;
 	case _PAGE_CACHE_WB:
-		SetPageUncached(pg);
-		SetPageWC(pg);
-		break;
-	default:
-	case -1:
-		ClearPageUncached(pg);
-		ClearPageWC(pg);
+		memtype_flags = _PGMT_WB;
 		break;
 	}
+
+	do {
+		old_flags = pg->flags;
+		new_flags = (old_flags & _PGMT_CLEAR_MASK) | memtype_flags;
+	} while (cmpxchg(&pg->flags, old_flags, new_flags) != old_flags);
 }
 #else
 static inline unsigned long get_page_memtype(struct page *pg) { return -1; }
@@ -139,9 +145,11 @@ int set_memory_np(unsigned long addr, int numpages);
 int set_memory_4k(unsigned long addr, int numpages);
 
 int set_memory_array_uc(unsigned long *addr, int addrinarray);
+int set_memory_array_wc(unsigned long *addr, int addrinarray);
 int set_memory_array_wb(unsigned long *addr, int addrinarray);
 
 int set_pages_array_uc(struct page **pages, int addrinarray);
+int set_pages_array_wc(struct page **pages, int addrinarray);
 int set_pages_array_wb(struct page **pages, int addrinarray);
 
 /*
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index ffb9bb6..8859e12 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -271,7 +271,8 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 	__typeof__(*(ptr)) __ret;				\
 	__typeof__(*(ptr)) __old = (o);				\
 	__typeof__(*(ptr)) __new = (n);				\
-	alternative_io("call cmpxchg8b_emu",			\
+	alternative_io(LOCK_PREFIX_HERE				\
+			"call cmpxchg8b_emu",			\
 			"lock; cmpxchg8b (%%esi)" ,		\
 		       X86_FEATURE_CX8,				\
 		       "=A" (__ret),				\
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 9a9c7bd..306160e 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -8,7 +8,8 @@
 #include <linux/sched.h>
 #include <asm/user32.h>
 
-#define COMPAT_USER_HZ	100
+#define COMPAT_USER_HZ		100
+#define COMPAT_UTS_MACHINE	"i686\0\0"
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 637e1ec..4681459 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -161,6 +161,7 @@
  */
 #define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
 #define X86_FEATURE_ARAT	(7*32+ 1) /* Always Running APIC Timer */
+#define X86_FEATURE_CPB		(7*32+ 2) /* AMD Core Performance Boost */
 
 /* Virtualization flags: Linux defined */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
@@ -168,9 +169,14 @@
 #define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
 #define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
 #define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
+#define X86_FEATURE_NPT		(8*32+5)  /* AMD Nested Page Table support */
+#define X86_FEATURE_LBRV	(8*32+6)  /* AMD LBR Virtualization support */
+#define X86_FEATURE_SVML	(8*32+7)  /* "svm_lock" AMD SVM locking MSR */
+#define X86_FEATURE_NRIPS	(8*32+8)  /* "nrip_save" AMD SVM next_rip save */
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 
+#include <asm/asm.h>
 #include <linux/bitops.h>
 
 extern const char * const x86_cap_flags[NCAPINTS*32];
@@ -279,6 +285,69 @@ extern const char * const x86_power_flags[32];
 
 #endif /* CONFIG_X86_64 */
 
+/*
+ * Static testing of CPU features.  Used the same as boot_cpu_has().
+ * These are only valid after alternatives have run, but will statically
+ * patch the target code for additional performance.
+ *
+ */
+static __always_inline __pure bool __static_cpu_has(u8 bit)
+{
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+		asm goto("1: jmp %l[t_no]\n"
+			 "2:\n"
+			 ".section .altinstructions,\"a\"\n"
+			 _ASM_ALIGN "\n"
+			 _ASM_PTR "1b\n"
+			 _ASM_PTR "0\n" 	/* no replacement */
+			 " .byte %P0\n"		/* feature bit */
+			 " .byte 2b - 1b\n"	/* source len */
+			 " .byte 0\n"		/* replacement len */
+			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
+			 ".previous\n"
+			 : : "i" (bit) : : t_no);
+		return true;
+	t_no:
+		return false;
+#else
+		u8 flag;
+		/* Open-coded due to __stringify() in ALTERNATIVE() */
+		asm volatile("1: movb $0,%0\n"
+			     "2:\n"
+			     ".section .altinstructions,\"a\"\n"
+			     _ASM_ALIGN "\n"
+			     _ASM_PTR "1b\n"
+			     _ASM_PTR "3f\n"
+			     " .byte %P1\n"		/* feature bit */
+			     " .byte 2b - 1b\n"		/* source len */
+			     " .byte 4f - 3f\n"		/* replacement len */
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .altinstr_replacement,\"ax\"\n"
+			     "3: movb $1,%0\n"
+			     "4:\n"
+			     ".previous\n"
+			     : "=qm" (flag) : "i" (bit));
+		return flag;
+#endif
+}
+
+#if __GNUC__ >= 4
+#define static_cpu_has(bit)					\
+(								\
+	__builtin_constant_p(boot_cpu_has(bit)) ?		\
+		boot_cpu_has(bit) :				\
+	(__builtin_constant_p(bit) && !((bit) & ~0xff)) ?	\
+		__static_cpu_has(bit) :				\
+		boot_cpu_has(bit)				\
+)
+#else
+/*
+ * gcc 3.x is too stupid to do the static test; fall back to dynamic.
+ */
+#define static_cpu_has(bit) boot_cpu_has(bit)
+#endif
+
 #endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
 
 #endif /* _ASM_X86_CPUFEATURE_H */
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index 8240f76..b81002f 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -14,6 +14,9 @@
    which debugging register was responsible for the trap.  The other bits
    are either reserved or not of interest to us. */
 
+/* Define reserved bits in DR6 which are always set to 1 */
+#define DR6_RESERVED	(0xFFFF0FF0)
+
 #define DR_TRAP0	(0x1)		/* db0 */
 #define DR_TRAP1	(0x2)		/* db1 */
 #define DR_TRAP2	(0x4)		/* db2 */
diff --git a/arch/x86/include/asm/ds.h b/arch/x86/include/asm/ds.h
deleted file mode 100644
index 70dac19..0000000
--- a/arch/x86/include/asm/ds.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Debug Store (DS) support
- *
- * This provides a low-level interface to the hardware's Debug Store
- * feature that is used for branch trace store (BTS) and
- * precise-event based sampling (PEBS).
- *
- * It manages:
- * - DS and BTS hardware configuration
- * - buffer overflow handling (to be done)
- * - buffer access
- *
- * It does not do:
- * - security checking (is the caller allowed to trace the task)
- * - buffer allocation (memory accounting)
- *
- *
- * Copyright (C) 2007-2009 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
- */
-
-#ifndef _ASM_X86_DS_H
-#define _ASM_X86_DS_H
-
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-
-#ifdef CONFIG_X86_DS
-
-struct task_struct;
-struct ds_context;
-struct ds_tracer;
-struct bts_tracer;
-struct pebs_tracer;
-
-typedef void (*bts_ovfl_callback_t)(struct bts_tracer *);
-typedef void (*pebs_ovfl_callback_t)(struct pebs_tracer *);
-
-
-/*
- * A list of features plus corresponding macros to talk about them in
- * the ds_request function's flags parameter.
- *
- * We use the enum to index an array of corresponding control bits;
- * we use the macro to index a flags bit-vector.
- */
-enum ds_feature {
-	dsf_bts = 0,
-	dsf_bts_kernel,
-#define BTS_KERNEL (1 << dsf_bts_kernel)
-	/* trace kernel-mode branches */
-
-	dsf_bts_user,
-#define BTS_USER (1 << dsf_bts_user)
-	/* trace user-mode branches */
-
-	dsf_bts_overflow,
-	dsf_bts_max,
-	dsf_pebs = dsf_bts_max,
-
-	dsf_pebs_max,
-	dsf_ctl_max = dsf_pebs_max,
-	dsf_bts_timestamps = dsf_ctl_max,
-#define BTS_TIMESTAMPS (1 << dsf_bts_timestamps)
-	/* add timestamps into BTS trace */
-
-#define BTS_USER_FLAGS (BTS_KERNEL | BTS_USER | BTS_TIMESTAMPS)
-};
-
-
-/*
- * Request BTS or PEBS
- *
- * Due to alignement constraints, the actual buffer may be slightly
- * smaller than the requested or provided buffer.
- *
- * Returns a pointer to a tracer structure on success, or
- * ERR_PTR(errcode) on failure.
- *
- * The interrupt threshold is independent from the overflow callback
- * to allow users to use their own overflow interrupt handling mechanism.
- *
- * The function might sleep.
- *
- * task: the task to request recording for
- * cpu:  the cpu to request recording for
- * base: the base pointer for the (non-pageable) buffer;
- * size: the size of the provided buffer in bytes
- * ovfl: pointer to a function to be called on buffer overflow;
- *       NULL if cyclic buffer requested
- * th: the interrupt threshold in records from the end of the buffer;
- *     -1 if no interrupt threshold is requested.
- * flags: a bit-mask of the above flags
- */
-extern struct bts_tracer *ds_request_bts_task(struct task_struct *task,
-					      void *base, size_t size,
-					      bts_ovfl_callback_t ovfl,
-					      size_t th, unsigned int flags);
-extern struct bts_tracer *ds_request_bts_cpu(int cpu, void *base, size_t size,
-					     bts_ovfl_callback_t ovfl,
-					     size_t th, unsigned int flags);
-extern struct pebs_tracer *ds_request_pebs_task(struct task_struct *task,
-						void *base, size_t size,
-						pebs_ovfl_callback_t ovfl,
-						size_t th, unsigned int flags);
-extern struct pebs_tracer *ds_request_pebs_cpu(int cpu,
-					       void *base, size_t size,
-					       pebs_ovfl_callback_t ovfl,
-					       size_t th, unsigned int flags);
-
-/*
- * Release BTS or PEBS resources
- * Suspend and resume BTS or PEBS tracing
- *
- * Must be called with irq's enabled.
- *
- * tracer: the tracer handle returned from ds_request_~()
- */
-extern void ds_release_bts(struct bts_tracer *tracer);
-extern void ds_suspend_bts(struct bts_tracer *tracer);
-extern void ds_resume_bts(struct bts_tracer *tracer);
-extern void ds_release_pebs(struct pebs_tracer *tracer);
-extern void ds_suspend_pebs(struct pebs_tracer *tracer);
-extern void ds_resume_pebs(struct pebs_tracer *tracer);
-
-/*
- * Release BTS or PEBS resources
- * Suspend and resume BTS or PEBS tracing
- *
- * Cpu tracers must call this on the traced cpu.
- * Task tracers must call ds_release_~_noirq() for themselves.
- *
- * May be called with irq's disabled.
- *
- * Returns 0 if successful;
- * -EPERM if the cpu tracer does not trace the current cpu.
- * -EPERM if the task tracer does not trace itself.
- *
- * tracer: the tracer handle returned from ds_request_~()
- */
-extern int ds_release_bts_noirq(struct bts_tracer *tracer);
-extern int ds_suspend_bts_noirq(struct bts_tracer *tracer);
-extern int ds_resume_bts_noirq(struct bts_tracer *tracer);
-extern int ds_release_pebs_noirq(struct pebs_tracer *tracer);
-extern int ds_suspend_pebs_noirq(struct pebs_tracer *tracer);
-extern int ds_resume_pebs_noirq(struct pebs_tracer *tracer);
-
-
-/*
- * The raw DS buffer state as it is used for BTS and PEBS recording.
- *
- * This is the low-level, arch-dependent interface for working
- * directly on the raw trace data.
- */
-struct ds_trace {
-	/* the number of bts/pebs records */
-	size_t n;
-	/* the size of a bts/pebs record in bytes */
-	size_t size;
-	/* pointers into the raw buffer:
-	   - to the first entry */
-	void *begin;
-	/* - one beyond the last entry */
-	void *end;
-	/* - one beyond the newest entry */
-	void *top;
-	/* - the interrupt threshold */
-	void *ith;
-	/* flags given on ds_request() */
-	unsigned int flags;
-};
-
-/*
- * An arch-independent view on branch trace data.
- */
-enum bts_qualifier {
-	bts_invalid,
-#define BTS_INVALID bts_invalid
-
-	bts_branch,
-#define BTS_BRANCH bts_branch
-
-	bts_task_arrives,
-#define BTS_TASK_ARRIVES bts_task_arrives
-
-	bts_task_departs,
-#define BTS_TASK_DEPARTS bts_task_departs
-
-	bts_qual_bit_size = 4,
-	bts_qual_max = (1 << bts_qual_bit_size),
-};
-
-struct bts_struct {
-	__u64 qualifier;
-	union {
-		/* BTS_BRANCH */
-		struct {
-			__u64 from;
-			__u64 to;
-		} lbr;
-		/* BTS_TASK_ARRIVES or BTS_TASK_DEPARTS */
-		struct {
-			__u64 clock;
-			pid_t pid;
-		} event;
-	} variant;
-};
-
-
-/*
- * The BTS state.
- *
- * This gives access to the raw DS state and adds functions to provide
- * an arch-independent view of the BTS data.
- */
-struct bts_trace {
-	struct ds_trace ds;
-
-	int (*read)(struct bts_tracer *tracer, const void *at,
-		    struct bts_struct *out);
-	int (*write)(struct bts_tracer *tracer, const struct bts_struct *in);
-};
-
-
-/*
- * The PEBS state.
- *
- * This gives access to the raw DS state and the PEBS-specific counter
- * reset value.
- */
-struct pebs_trace {
-	struct ds_trace ds;
-
-	/* the number of valid counters in the below array */
-	unsigned int counters;
-
-#define MAX_PEBS_COUNTERS 4
-	/* the counter reset value */
-	unsigned long long counter_reset[MAX_PEBS_COUNTERS];
-};
-
-
-/*
- * Read the BTS or PEBS trace.
- *
- * Returns a view on the trace collected for the parameter tracer.
- *
- * The view remains valid as long as the traced task is not running or
- * the tracer is suspended.
- * Writes into the trace buffer are not reflected.
- *
- * tracer: the tracer handle returned from ds_request_~()
- */
-extern const struct bts_trace *ds_read_bts(struct bts_tracer *tracer);
-extern const struct pebs_trace *ds_read_pebs(struct pebs_tracer *tracer);
-
-
-/*
- * Reset the write pointer of the BTS/PEBS buffer.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * tracer: the tracer handle returned from ds_request_~()
- */
-extern int ds_reset_bts(struct bts_tracer *tracer);
-extern int ds_reset_pebs(struct pebs_tracer *tracer);
-
-/*
- * Set the PEBS counter reset value.
- *
- * Returns 0 on success; -Eerrno on error
- *
- * tracer: the tracer handle returned from ds_request_pebs()
- * counter: the index of the counter
- * value: the new counter reset value
- */
-extern int ds_set_pebs_reset(struct pebs_tracer *tracer,
-			     unsigned int counter, u64 value);
-
-/*
- * Initialization
- */
-struct cpuinfo_x86;
-extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
-
-/*
- * Context switch work
- */
-extern void ds_switch_to(struct task_struct *prev, struct task_struct *next);
-
-#else /* CONFIG_X86_DS */
-
-struct cpuinfo_x86;
-static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
-static inline void ds_switch_to(struct task_struct *prev,
-				struct task_struct *next) {}
-
-#endif /* CONFIG_X86_DS */
-#endif /* _ASM_X86_DS_H */
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index ae6253a..733f7e9 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -34,6 +34,18 @@
 #define CFI_SIGNAL_FRAME
 #endif
 
+#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
+	/*
+	 * Emit CFI data in .debug_frame sections, not .eh_frame sections.
+	 * The latter we currently just discard since we don't do DWARF
+	 * unwinding at runtime.  So only the offline DWARF information is
+	 * useful to anyone.  Note we should not use this directive if this
+	 * file is used in the vDSO assembly, or if vmlinux.lds.S gets
+	 * changed so it doesn't discard .eh_frame.
+	 */
+	.cfi_sections .debug_frame
+#endif
+
 #else
 
 /*
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 761249e..ec8a52d 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -45,7 +45,12 @@
 #define E820_NVS	4
 #define E820_UNUSABLE	5
 
-/* reserved RAM used by kernel itself */
+/*
+ * reserved RAM used by kernel itself
+ * if CONFIG_INTEL_TXT is enabled, memory of this type will be
+ * included in the S3 integrity calculation and so should not include
+ * any memory that BIOS might alter over the S3 transition
+ */
 #define E820_RESERVED_KERN        128
 
 #ifndef __ASSEMBLY__
@@ -111,11 +116,8 @@ extern unsigned long end_user_pfn;
 
 extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
 extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
-extern void reserve_early(u64 start, u64 end, char *name);
-extern void reserve_early_overlap_ok(u64 start, u64 end, char *name);
-extern void free_early(u64 start, u64 end);
-extern void early_res_to_bootmem(u64 start, u64 end);
 extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+#include <linux/early_res.h>
 
 extern unsigned long e820_end_of_ram_pfn(void);
 extern unsigned long e820_end_of_low_ram_pfn(void);
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 1994d3f..f2ad216 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -170,10 +170,7 @@ static inline void elf_common_init(struct thread_struct *t,
 }
 
 #define ELF_PLAT_INIT(_r, load_addr)			\
-do {							\
-	elf_common_init(&current->thread, _r, 0);	\
-	clear_thread_flag(TIF_IA32);			\
-} while (0)
+	elf_common_init(&current->thread, _r, 0)
 
 #define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
 	elf_common_init(&current->thread, regs, __USER_DS)
diff --git a/arch/x86/include/asm/fb.h b/arch/x86/include/asm/fb.h
index 5301846..2519d06 100644
--- a/arch/x86/include/asm/fb.h
+++ b/arch/x86/include/asm/fb.h
@@ -12,10 +12,6 @@ static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
 		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
 }
 
-#ifdef CONFIG_X86_32
 extern int fb_is_primary_device(struct fb_info *info);
-#else
-static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
-#endif
 
 #endif /* _ASM_X86_FB_H */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 14f9890..d07b44f 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -82,6 +82,9 @@ enum fixed_addresses {
 #endif
 	FIX_DBGP_BASE,
 	FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 #ifdef CONFIG_X86_LOCAL_APIC
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 #endif
@@ -118,17 +121,20 @@ enum fixed_addresses {
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
 	 *
-	 * We round it up to the next 256 pages boundary so that we
-	 * can have a single pgd entry and a single pte table:
+	 * If necessary we round it up to the next 256 pages boundary so
+	 * that we can have a single pgd entry and a single pte table:
 	 */
 #define NR_FIX_BTMAPS		64
 #define FIX_BTMAPS_SLOTS	4
-	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
-			(__end_of_permanent_fixed_addresses & 255),
-	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
+#define TOTAL_FIX_BTMAPS	(NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
+	FIX_BTMAP_END =
+	 (__end_of_permanent_fixed_addresses ^
+	  (__end_of_permanent_fixed_addresses + TOTAL_FIX_BTMAPS - 1)) &
+	 -PTRS_PER_PTE
+	 ? __end_of_permanent_fixed_addresses + TOTAL_FIX_BTMAPS -
+	   (__end_of_permanent_fixed_addresses & (TOTAL_FIX_BTMAPS - 1))
+	 : __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
 #endif
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 0f85764..aeab29a 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -35,7 +35,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 #define __ARCH_IRQ_STAT
 
-#define inc_irq_stat(member)	percpu_add(irq_stat.member, 1)
+#define inc_irq_stat(member)	percpu_inc(irq_stat.member)
 
 #define local_softirq_pending()	percpu_read(irq_stat.__softirq_pending)
 
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
index 014c2b8..a726650 100644
--- a/arch/x86/include/asm/highmem.h
+++ b/arch/x86/include/asm/highmem.h
@@ -66,10 +66,6 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
 void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 struct page *kmap_atomic_to_page(void *ptr);
 
-#ifndef CONFIG_PARAVIRT
-#define kmap_atomic_pte(page, type)	kmap_atomic(page, type)
-#endif
-
 #define flush_cache_kmaps()	do { } while (0)
 
 extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn,
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 1d5c08a..004e6e2 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -68,6 +68,7 @@ extern unsigned long force_hpet_address;
 extern u8 hpet_blockid;
 extern int hpet_force_user;
 extern u8 hpet_msi_disable;
+extern u8 hpet_readback_cmp;
 extern int is_hpet_enabled(void);
 extern int hpet_enable(void);
 extern void hpet_disable(void);
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
index 0675a7c..9422553 100644
--- a/arch/x86/include/asm/hw_breakpoint.h
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -10,7 +10,6 @@
  * (display/resolving)
  */
 struct arch_hw_breakpoint {
-	char		*name; /* Contains name of the symbol to set bkpt */
 	unsigned long	address;
 	u8		len;
 	u8		type;
@@ -42,12 +41,16 @@ struct arch_hw_breakpoint {
 /* Total number of available HW breakpoint registers */
 #define HBP_NUM 4
 
+static inline int hw_breakpoint_slots(int type)
+{
+	return HBP_NUM;
+}
+
 struct perf_event;
 struct pmu;
 
-extern int arch_check_va_in_userspace(unsigned long va, u8 hbp_len);
-extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
-					 struct task_struct *tsk);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
 extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
 					   unsigned long val, void *data);
 
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index eeac829..46c0fe0 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -53,13 +53,6 @@ extern void threshold_interrupt(void);
 extern void call_function_interrupt(void);
 extern void call_function_single_interrupt(void);
 
-/* PIC specific functions */
-extern void disable_8259A_irq(unsigned int irq);
-extern void enable_8259A_irq(unsigned int irq);
-extern int i8259A_irq_pending(unsigned int irq);
-extern void make_8259A_irq(unsigned int irq);
-extern void init_8259A(int aeoi);
-
 /* IOAPIC */
 #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
@@ -140,6 +133,7 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
 
 typedef int vector_irq_t[NR_VECTORS];
 DECLARE_PER_CPU(vector_irq_t, vector_irq);
+extern void setup_vector_irq(int cpu);
 
 #ifdef CONFIG_X86_IO_APIC
 extern void lock_vector_lock(void);
diff --git a/arch/x86/include/asm/hyperv.h b/arch/x86/include/asm/hyperv.h
new file mode 100644
index 0000000..5df477a
--- /dev/null
+++ b/arch/x86/include/asm/hyperv.h
@@ -0,0 +1,193 @@
+#ifndef _ASM_X86_HYPERV_H
+#define _ASM_X86_HYPERV_H
+
+#include <linux/types.h>
+
+/*
+ * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
+ * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
+ */
+#define HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS	0x40000000
+#define HYPERV_CPUID_INTERFACE			0x40000001
+#define HYPERV_CPUID_VERSION			0x40000002
+#define HYPERV_CPUID_FEATURES			0x40000003
+#define HYPERV_CPUID_ENLIGHTMENT_INFO		0x40000004
+#define HYPERV_CPUID_IMPLEMENT_LIMITS		0x40000005
+
+#define HYPERV_HYPERVISOR_PRESENT_BIT		0x80000000
+#define HYPERV_CPUID_MIN			0x40000005
+#define HYPERV_CPUID_MAX			0x4000ffff
+
+/*
+ * Feature identification. EAX indicates which features are available
+ * to the partition based upon the current partition privileges.
+ */
+
+/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
+#define HV_X64_MSR_VP_RUNTIME_AVAILABLE		(1 << 0)
+/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
+#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE	(1 << 1)
+/*
+ * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
+ * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
+ */
+#define HV_X64_MSR_SYNIC_AVAILABLE		(1 << 2)
+/*
+ * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
+ * HV_X64_MSR_STIMER3_COUNT) available
+ */
+#define HV_X64_MSR_SYNTIMER_AVAILABLE		(1 << 3)
+/*
+ * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
+ * are available
+ */
+#define HV_X64_MSR_APIC_ACCESS_AVAILABLE	(1 << 4)
+/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
+#define HV_X64_MSR_HYPERCALL_AVAILABLE		(1 << 5)
+/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
+#define HV_X64_MSR_VP_INDEX_AVAILABLE		(1 << 6)
+/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
+#define HV_X64_MSR_RESET_AVAILABLE		(1 << 7)
+ /*
+  * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
+  * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
+  * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
+  */
+#define HV_X64_MSR_STAT_PAGES_AVAILABLE		(1 << 8)
+
+/*
+ * Feature identification: EBX indicates which flags were specified at
+ * partition creation. The format is the same as the partition creation
+ * flag structure defined in section Partition Creation Flags.
+ */
+#define HV_X64_CREATE_PARTITIONS		(1 << 0)
+#define HV_X64_ACCESS_PARTITION_ID		(1 << 1)
+#define HV_X64_ACCESS_MEMORY_POOL		(1 << 2)
+#define HV_X64_ADJUST_MESSAGE_BUFFERS		(1 << 3)
+#define HV_X64_POST_MESSAGES			(1 << 4)
+#define HV_X64_SIGNAL_EVENTS			(1 << 5)
+#define HV_X64_CREATE_PORT			(1 << 6)
+#define HV_X64_CONNECT_PORT			(1 << 7)
+#define HV_X64_ACCESS_STATS			(1 << 8)
+#define HV_X64_DEBUGGING			(1 << 11)
+#define HV_X64_CPU_POWER_MANAGEMENT		(1 << 12)
+#define HV_X64_CONFIGURE_PROFILER		(1 << 13)
+
+/*
+ * Feature identification. EDX indicates which miscellaneous features
+ * are available to the partition.
+ */
+/* The MWAIT instruction is available (per section MONITOR / MWAIT) */
+#define HV_X64_MWAIT_AVAILABLE				(1 << 0)
+/* Guest debugging support is available */
+#define HV_X64_GUEST_DEBUGGING_AVAILABLE		(1 << 1)
+/* Performance Monitor support is available*/
+#define HV_X64_PERF_MONITOR_AVAILABLE			(1 << 2)
+/* Support for physical CPU dynamic partitioning events is available*/
+#define HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE	(1 << 3)
+/*
+ * Support for passing hypercall input parameter block via XMM
+ * registers is available
+ */
+#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE		(1 << 4)
+/* Support for a virtual guest idle state is available */
+#define HV_X64_GUEST_IDLE_STATE_AVAILABLE		(1 << 5)
+
+/*
+ * Implementation recommendations. Indicates which behaviors the hypervisor
+ * recommends the OS implement for optimal performance.
+ */
+ /*
+  * Recommend using hypercall for address space switches rather
+  * than MOV to CR3 instruction
+  */
+#define HV_X64_MWAIT_RECOMMENDED		(1 << 0)
+/* Recommend using hypercall for local TLB flushes rather
+ * than INVLPG or MOV to CR3 instructions */
+#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED	(1 << 1)
+/*
+ * Recommend using hypercall for remote TLB flushes rather
+ * than inter-processor interrupts
+ */
+#define HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED	(1 << 2)
+/*
+ * Recommend using MSRs for accessing APIC registers
+ * EOI, ICR and TPR rather than their memory-mapped counterparts
+ */
+#define HV_X64_APIC_ACCESS_RECOMMENDED		(1 << 3)
+/* Recommend using the hypervisor-provided MSR to initiate a system RESET */
+#define HV_X64_SYSTEM_RESET_RECOMMENDED		(1 << 4)
+/*
+ * Recommend using relaxed timing for this partition. If used,
+ * the VM should disable any watchdog timeouts that rely on the
+ * timely delivery of external interrupts
+ */
+#define HV_X64_RELAXED_TIMING_RECOMMENDED	(1 << 5)
+
+/* MSR used to identify the guest OS. */
+#define HV_X64_MSR_GUEST_OS_ID			0x40000000
+
+/* MSR used to setup pages used to communicate with the hypervisor. */
+#define HV_X64_MSR_HYPERCALL			0x40000001
+
+/* MSR used to provide vcpu index */
+#define HV_X64_MSR_VP_INDEX			0x40000002
+
+/* MSR used to read the per-partition time reference counter */
+#define HV_X64_MSR_TIME_REF_COUNT		0x40000020
+
+/* Define the virtual APIC registers */
+#define HV_X64_MSR_EOI				0x40000070
+#define HV_X64_MSR_ICR				0x40000071
+#define HV_X64_MSR_TPR				0x40000072
+#define HV_X64_MSR_APIC_ASSIST_PAGE		0x40000073
+
+/* Define synthetic interrupt controller model specific registers. */
+#define HV_X64_MSR_SCONTROL			0x40000080
+#define HV_X64_MSR_SVERSION			0x40000081
+#define HV_X64_MSR_SIEFP			0x40000082
+#define HV_X64_MSR_SIMP				0x40000083
+#define HV_X64_MSR_EOM				0x40000084
+#define HV_X64_MSR_SINT0			0x40000090
+#define HV_X64_MSR_SINT1			0x40000091
+#define HV_X64_MSR_SINT2			0x40000092
+#define HV_X64_MSR_SINT3			0x40000093
+#define HV_X64_MSR_SINT4			0x40000094
+#define HV_X64_MSR_SINT5			0x40000095
+#define HV_X64_MSR_SINT6			0x40000096
+#define HV_X64_MSR_SINT7			0x40000097
+#define HV_X64_MSR_SINT8			0x40000098
+#define HV_X64_MSR_SINT9			0x40000099
+#define HV_X64_MSR_SINT10			0x4000009A
+#define HV_X64_MSR_SINT11			0x4000009B
+#define HV_X64_MSR_SINT12			0x4000009C
+#define HV_X64_MSR_SINT13			0x4000009D
+#define HV_X64_MSR_SINT14			0x4000009E
+#define HV_X64_MSR_SINT15			0x4000009F
+
+
+#define HV_X64_MSR_HYPERCALL_ENABLE		0x00000001
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT	12
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK	\
+		(~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
+
+/* Declare the various hypercall operations. */
+#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT		0x0008
+
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE		0x00000001
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT	12
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK	\
+		(~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
+
+#define HV_PROCESSOR_POWER_STATE_C0		0
+#define HV_PROCESSOR_POWER_STATE_C1		1
+#define HV_PROCESSOR_POWER_STATE_C2		2
+#define HV_PROCESSOR_POWER_STATE_C3		3
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS			0
+#define HV_STATUS_INVALID_HYPERCALL_CODE	2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT	3
+#define HV_STATUS_INVALID_ALIGNMENT		4
+
+#endif
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index b78c094..70abda7 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -17,10 +17,33 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
  *
  */
-#ifndef ASM_X86__HYPERVISOR_H
-#define ASM_X86__HYPERVISOR_H
+#ifndef _ASM_X86_HYPERVISOR_H
+#define _ASM_X86_HYPERVISOR_H
 
 extern void init_hypervisor(struct cpuinfo_x86 *c);
 extern void init_hypervisor_platform(void);
 
+/*
+ * x86 hypervisor information
+ */
+struct hypervisor_x86 {
+	/* Hypervisor name */
+	const char	*name;
+
+	/* Detection routine */
+	bool		(*detect)(void);
+
+	/* Adjust CPU feature bits (run once per CPU) */
+	void		(*set_cpu_features)(struct cpuinfo_x86 *);
+
+	/* Platform setup (run once per boot) */
+	void		(*init_platform)(void);
+};
+
+extern const struct hypervisor_x86 *x86_hyper;
+
+/* Recognized hypervisors */
+extern const struct hypervisor_x86 x86_hyper_vmware;
+extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
+
 #endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index ebfb8a9..c991b3a 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -16,7 +16,9 @@
 #include <linux/kernel_stat.h>
 #include <linux/regset.h>
 #include <linux/hardirq.h>
+#include <linux/slab.h>
 #include <asm/asm.h>
+#include <asm/cpufeature.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
 #include <asm/user.h>
@@ -33,8 +35,16 @@ extern void init_thread_xstate(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
 extern user_regset_active_fn fpregs_active, xfpregs_active;
-extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
-extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
+				xstateregs_get;
+extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
+				 xstateregs_set;
+
+/*
+ * xstateregs_active == fpregs_active. Please refer to the comment
+ * at the definition of fpregs_active.
+ */
+#define xstateregs_active	fpregs_active
 
 extern struct _fpx_sw_bytes fx_sw_reserved;
 #ifdef CONFIG_IA32_EMULATION
@@ -48,6 +58,11 @@ extern int restore_i387_xstate_ia32(void __user *buf);
 
 #define X87_FSW_ES (1 << 7)	/* Exception Summary */
 
+static __always_inline __pure bool use_xsave(void)
+{
+	return static_cpu_has(X86_FEATURE_XSAVE);
+}
+
 #ifdef CONFIG_X86_64
 
 /* Ignore delayed exceptions from user space */
@@ -83,15 +98,15 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
    values. The kernel data segment can be sometimes 0 and sometimes
    new user value. Both should be ok.
    Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct task_struct *tsk)
+static inline void fpu_clear(struct fpu *fpu)
 {
-	struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
-	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+	struct xsave_struct *xstate = &fpu->state->xsave;
+	struct i387_fxsave_struct *fx = &fpu->state->fxsave;
 
 	/*
 	 * xsave header may indicate the init state of the FP.
 	 */
-	if ((task_thread_info(tsk)->status & TS_XSAVE) &&
+	if (use_xsave() &&
 	    !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
 		return;
 
@@ -103,6 +118,11 @@ static inline void clear_fpu_state(struct task_struct *tsk)
 			  X86_FEATURE_FXSAVE_LEAK);
 }
 
+static inline void clear_fpu_state(struct task_struct *tsk)
+{
+	fpu_clear(&tsk->thread.fpu);
+}
+
 static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 {
 	int err;
@@ -127,7 +147,7 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 	return err;
 }
 
-static inline void fxsave(struct task_struct *tsk)
+static inline void fpu_fxsave(struct fpu *fpu)
 {
 	/* Using "rex64; fxsave %0" is broken because, if the memory operand
 	   uses any extended registers for addressing, a second REX prefix
@@ -137,42 +157,45 @@ static inline void fxsave(struct task_struct *tsk)
 	/* Using "fxsaveq %0" would be the ideal choice, but is only supported
 	   starting with gas 2.16. */
 	__asm__ __volatile__("fxsaveq %0"
-			     : "=m" (tsk->thread.xstate->fxsave));
+			     : "=m" (fpu->state->fxsave));
 #elif 0
 	/* Using, as a workaround, the properly prefixed form below isn't
 	   accepted by any binutils version so far released, complaining that
 	   the same type of prefix is used twice if an extended register is
 	   needed for addressing (fix submitted to mainline 2005-11-21). */
 	__asm__ __volatile__("rex64/fxsave %0"
-			     : "=m" (tsk->thread.xstate->fxsave));
+			     : "=m" (fpu->state->fxsave));
 #else
 	/* This, however, we can work around by forcing the compiler to select
 	   an addressing mode that doesn't require extended registers. */
 	__asm__ __volatile__("rex64/fxsave (%1)"
-			     : "=m" (tsk->thread.xstate->fxsave)
-			     : "cdaSDb" (&tsk->thread.xstate->fxsave));
+			     : "=m" (fpu->state->fxsave)
+			     : "cdaSDb" (&fpu->state->fxsave));
 #endif
 }
 
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline void fpu_save_init(struct fpu *fpu)
 {
-	if (task_thread_info(tsk)->status & TS_XSAVE)
-		xsave(tsk);
+	if (use_xsave())
+		fpu_xsave(fpu);
 	else
-		fxsave(tsk);
+		fpu_fxsave(fpu);
 
-	clear_fpu_state(tsk);
+	fpu_clear(fpu);
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	fpu_save_init(&tsk->thread.fpu);
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
 #else  /* CONFIG_X86_32 */
 
 #ifdef CONFIG_MATH_EMULATION
-extern void finit_task(struct task_struct *tsk);
+extern void finit_soft_fpu(struct i387_soft_struct *soft);
 #else
-static inline void finit_task(struct task_struct *tsk)
-{
-}
+static inline void finit_soft_fpu(struct i387_soft_struct *soft) {}
 #endif
 
 static inline void tolerant_fwait(void)
@@ -208,13 +231,13 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 /*
  * These must be called with preempt disabled
  */
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline void fpu_save_init(struct fpu *fpu)
 {
-	if (task_thread_info(tsk)->status & TS_XSAVE) {
-		struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
-		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+	if (use_xsave()) {
+		struct xsave_struct *xstate = &fpu->state->xsave;
+		struct i387_fxsave_struct *fx = &fpu->state->fxsave;
 
-		xsave(tsk);
+		fpu_xsave(fpu);
 
 		/*
 		 * xsave header may indicate the init state of the FP.
@@ -238,8 +261,8 @@ static inline void __save_init_fpu(struct task_struct *tsk)
 		"fxsave %[fx]\n"
 		"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
 		X86_FEATURE_FXSR,
-		[fx] "m" (tsk->thread.xstate->fxsave),
-		[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
+		[fx] "m" (fpu->state->fxsave),
+		[fsw] "m" (fpu->state->fxsave.swd) : "memory");
 clear_state:
 	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
 	   is pending.  Clear the x87 state here by setting it to fixed
@@ -251,17 +274,34 @@ clear_state:
 		X86_FEATURE_FXSAVE_LEAK,
 		[addr] "m" (safe_address));
 end:
+	;
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+	fpu_save_init(&tsk->thread.fpu);
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
+
 #endif	/* CONFIG_X86_64 */
 
-static inline int restore_fpu_checking(struct task_struct *tsk)
+static inline int fpu_fxrstor_checking(struct fpu *fpu)
+{
+	return fxrstor_checking(&fpu->state->fxsave);
+}
+
+static inline int fpu_restore_checking(struct fpu *fpu)
 {
-	if (task_thread_info(tsk)->status & TS_XSAVE)
-		return xrstor_checking(&tsk->thread.xstate->xsave);
+	if (use_xsave())
+		return fpu_xrstor_checking(fpu);
 	else
-		return fxrstor_checking(&tsk->thread.xstate->fxsave);
+		return fpu_fxrstor_checking(fpu);
+}
+
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+	return fpu_restore_checking(&tsk->thread.fpu);
 }
 
 /*
@@ -389,30 +429,59 @@ static inline void clear_fpu(struct task_struct *tsk)
 static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
 {
 	if (cpu_has_fxsr) {
-		return tsk->thread.xstate->fxsave.cwd;
+		return tsk->thread.fpu.state->fxsave.cwd;
 	} else {
-		return (unsigned short)tsk->thread.xstate->fsave.cwd;
+		return (unsigned short)tsk->thread.fpu.state->fsave.cwd;
 	}
 }
 
 static inline unsigned short get_fpu_swd(struct task_struct *tsk)
 {
 	if (cpu_has_fxsr) {
-		return tsk->thread.xstate->fxsave.swd;
+		return tsk->thread.fpu.state->fxsave.swd;
 	} else {
-		return (unsigned short)tsk->thread.xstate->fsave.swd;
+		return (unsigned short)tsk->thread.fpu.state->fsave.swd;
 	}
 }
 
 static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
 {
 	if (cpu_has_xmm) {
-		return tsk->thread.xstate->fxsave.mxcsr;
+		return tsk->thread.fpu.state->fxsave.mxcsr;
 	} else {
 		return MXCSR_DEFAULT;
 	}
 }
 
+static bool fpu_allocated(struct fpu *fpu)
+{
+	return fpu->state != NULL;
+}
+
+static inline int fpu_alloc(struct fpu *fpu)
+{
+	if (fpu_allocated(fpu))
+		return 0;
+	fpu->state = kmem_cache_alloc(task_xstate_cachep, GFP_KERNEL);
+	if (!fpu->state)
+		return -ENOMEM;
+	WARN_ON((unsigned long)fpu->state & 15);
+	return 0;
+}
+
+static inline void fpu_free(struct fpu *fpu)
+{
+	if (fpu->state) {
+		kmem_cache_free(task_xstate_cachep, fpu->state);
+		fpu->state = NULL;
+	}
+}
+
+static inline void fpu_copy(struct fpu *dst, struct fpu *src)
+{
+	memcpy(dst->state, src->state, xstate_size);
+}
+
 #endif /* __ASSEMBLY__ */
 
 #define PSHUFB_XMM5_XMM0 .byte 0x66, 0x0f, 0x38, 0x00, 0xc5
diff --git a/arch/x86/include/asm/i8253.h b/arch/x86/include/asm/i8253.h
index 1edbf89..fc1f579 100644
--- a/arch/x86/include/asm/i8253.h
+++ b/arch/x86/include/asm/i8253.h
@@ -6,7 +6,7 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
-extern spinlock_t i8253_lock;
+extern raw_spinlock_t i8253_lock;
 
 extern struct clock_event_device *global_clock_event;
 
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index 58d7091..1655147 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -24,12 +24,7 @@ extern unsigned int cached_irq_mask;
 #define SLAVE_ICW4_DEFAULT	0x01
 #define PIC_ICW4_AEOI		2
 
-extern spinlock_t i8259A_lock;
-
-extern void init_8259A(int auto_eoi);
-extern void enable_8259A_irq(unsigned int irq);
-extern void disable_8259A_irq(unsigned int irq);
-extern unsigned int startup_8259A_irq(unsigned int irq);
+extern raw_spinlock_t i8259A_lock;
 
 /* the PIC may need a careful delay on some platforms, hence specific calls */
 static inline unsigned char inb_pic(unsigned int port)
@@ -57,7 +52,17 @@ static inline void outb_pic(unsigned char value, unsigned int port)
 
 extern struct irq_chip i8259A_chip;
 
-extern void mask_8259A(void);
-extern void unmask_8259A(void);
+struct legacy_pic {
+	int nr_legacy_irqs;
+	struct irq_chip *chip;
+	void (*mask_all)(void);
+	void (*restore_mask)(void);
+	void (*init)(int auto_eoi);
+	int (*irq_pending)(unsigned int irq);
+	void (*make_irq)(unsigned int irq);
+};
+
+extern struct legacy_pic *legacy_pic;
+extern struct legacy_pic null_legacy_pic;
 
 #endif /* _ASM_X86_I8259_H */
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 96c2e0a..88c765e 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -68,6 +68,8 @@ struct insn {
 	const insn_byte_t *next_byte;
 };
 
+#define MAX_INSN_SIZE	16
+
 #define X86_MODRM_MOD(modrm) (((modrm) & 0xc0) >> 6)
 #define X86_MODRM_REG(modrm) (((modrm) & 0x38) >> 3)
 #define X86_MODRM_RM(modrm) ((modrm) & 0x07)
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index 14cf526..280bf7f 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -7,7 +7,66 @@
 
 #ifdef __ASSEMBLY__
 
+#define REG_NUM_INVALID		100
+
+#define REG_TYPE_R64		0
+#define REG_TYPE_XMM		1
+#define REG_TYPE_INVALID	100
+
+	.macro R64_NUM opd r64
+	\opd = REG_NUM_INVALID
+	.ifc \r64,%rax
+	\opd = 0
+	.endif
+	.ifc \r64,%rcx
+	\opd = 1
+	.endif
+	.ifc \r64,%rdx
+	\opd = 2
+	.endif
+	.ifc \r64,%rbx
+	\opd = 3
+	.endif
+	.ifc \r64,%rsp
+	\opd = 4
+	.endif
+	.ifc \r64,%rbp
+	\opd = 5
+	.endif
+	.ifc \r64,%rsi
+	\opd = 6
+	.endif
+	.ifc \r64,%rdi
+	\opd = 7
+	.endif
+	.ifc \r64,%r8
+	\opd = 8
+	.endif
+	.ifc \r64,%r9
+	\opd = 9
+	.endif
+	.ifc \r64,%r10
+	\opd = 10
+	.endif
+	.ifc \r64,%r11
+	\opd = 11
+	.endif
+	.ifc \r64,%r12
+	\opd = 12
+	.endif
+	.ifc \r64,%r13
+	\opd = 13
+	.endif
+	.ifc \r64,%r14
+	\opd = 14
+	.endif
+	.ifc \r64,%r15
+	\opd = 15
+	.endif
+	.endm
+
 	.macro XMM_NUM opd xmm
+	\opd = REG_NUM_INVALID
 	.ifc \xmm,%xmm0
 	\opd = 0
 	.endif
@@ -58,13 +117,25 @@
 	.endif
 	.endm
 
+	.macro REG_TYPE type reg
+	R64_NUM reg_type_r64 \reg
+	XMM_NUM reg_type_xmm \reg
+	.if reg_type_r64 <> REG_NUM_INVALID
+	\type = REG_TYPE_R64
+	.elseif reg_type_xmm <> REG_NUM_INVALID
+	\type = REG_TYPE_XMM
+	.else
+	\type = REG_TYPE_INVALID
+	.endif
+	.endm
+
 	.macro PFX_OPD_SIZE
 	.byte 0x66
 	.endm
 
-	.macro PFX_REX opd1 opd2
-	.if (\opd1 | \opd2) & 8
-	.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1)
+	.macro PFX_REX opd1 opd2 W=0
+	.if ((\opd1 | \opd2) & 8) || \W
+	.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) | (\W << 3)
 	.endif
 	.endm
 
@@ -145,6 +216,25 @@
 	.byte 0x0f, 0x38, 0xdf
 	MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
 	.endm
+
+	.macro MOVQ_R64_XMM opd1 opd2
+	REG_TYPE movq_r64_xmm_opd1_type \opd1
+	.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
+	XMM_NUM movq_r64_xmm_opd1 \opd1
+	R64_NUM movq_r64_xmm_opd2 \opd2
+	.else
+	R64_NUM movq_r64_xmm_opd1 \opd1
+	XMM_NUM movq_r64_xmm_opd2 \opd2
+	.endif
+	PFX_OPD_SIZE
+	PFX_REX movq_r64_xmm_opd1 movq_r64_xmm_opd2 1
+	.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
+	.byte 0x0f, 0x7e
+	.else
+	.byte 0x0f, 0x6e
+	.endif
+	MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
+	.endm
 #endif
 
 #endif
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
new file mode 100644
index 0000000..4470c9a
--- /dev/null
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_X86_INTEL_SCU_IPC_H_
+#define  _ASM_X86_INTEL_SCU_IPC_H_
+
+/* Read single register */
+int intel_scu_ipc_ioread8(u16 addr, u8 *data);
+
+/* Read two sequential registers */
+int intel_scu_ipc_ioread16(u16 addr, u16 *data);
+
+/* Read four sequential registers */
+int intel_scu_ipc_ioread32(u16 addr, u32 *data);
+
+/* Read a vector */
+int intel_scu_ipc_readv(u16 *addr, u8 *data, int len);
+
+/* Write single register */
+int intel_scu_ipc_iowrite8(u16 addr, u8 data);
+
+/* Write two sequential registers */
+int intel_scu_ipc_iowrite16(u16 addr, u16 data);
+
+/* Write four sequential registers */
+int intel_scu_ipc_iowrite32(u16 addr, u32 data);
+
+/* Write a vector */
+int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
+
+/* Update single register based on the mask */
+int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
+
+/*
+ * Indirect register read
+ * Can be used when SCCB(System Controller Configuration Block) register
+ * HRIM(Honor Restricted IPC Messages) is set (bit 23)
+ */
+int intel_scu_ipc_register_read(u32 addr, u32 *data);
+
+/*
+ * Indirect register write
+ * Can be used when SCCB(System Controller Configuration Block) register
+ * HRIM(Honor Restricted IPC Messages) is set (bit 23)
+ */
+int intel_scu_ipc_register_write(u32 addr, u32 data);
+
+/* Issue commands to the SCU with or without data */
+int intel_scu_ipc_simple_command(int cmd, int sub);
+int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
+							u32 *out, int outlen);
+/* I2C control api */
+int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data);
+
+/* Update FW version */
+int intel_scu_ipc_fw_update(u8 *buffer, u32 length);
+
+#endif
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 7373932..30a3e97 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -1,8 +1,42 @@
 #ifndef _ASM_X86_IO_H
 #define _ASM_X86_IO_H
 
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
 #define ARCH_HAS_IOREMAP_WC
 
+#include <linux/string.h>
 #include <linux/compiler.h>
 #include <asm-generic/int-ll64.h>
 #include <asm/page.h>
@@ -173,11 +207,126 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
 extern void iounmap(volatile void __iomem *addr);
 
 
-#ifdef CONFIG_X86_32
-# include "io_32.h"
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, size_t count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count)
+{
+	memcpy(dst, (const void __force *)src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, size_t count)
+{
+	memcpy((void __force *)dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+/*
+ *	Cache management
+ *
+ *	This needed for two cases
+ *	1. Out of order aware processors
+ *	2. Accidentally out of order processors (PPro errata #51)
+ */
+
+static inline void flush_write_buffers(void)
+{
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
 #else
-# include "io_64.h"
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
 #endif
+}
+
+#endif
+
+#define BUILDIO(bwl, bw, type)						\
+static inline void out##bwl(unsigned type value, int port)		\
+{									\
+	asm volatile("out" #bwl " %" #bw "0, %w1"			\
+		     : : "a"(value), "Nd"(port));			\
+}									\
+									\
+static inline unsigned type in##bwl(int port)				\
+{									\
+	unsigned type value;						\
+	asm volatile("in" #bwl " %w1, %" #bw "0"			\
+		     : "=a"(value) : "Nd"(port));			\
+	return value;							\
+}									\
+									\
+static inline void out##bwl##_p(unsigned type value, int port)		\
+{									\
+	out##bwl(value, port);						\
+	slow_down_io();							\
+}									\
+									\
+static inline unsigned type in##bwl##_p(int port)			\
+{									\
+	unsigned type value = in##bwl(port);				\
+	slow_down_io();							\
+	return value;							\
+}									\
+									\
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{									\
+	asm volatile("rep; outs" #bwl					\
+		     : "+S"(addr), "+c"(count) : "d"(port));		\
+}									\
+									\
+static inline void ins##bwl(int port, void *addr, unsigned long count)	\
+{									\
+	asm volatile("rep; ins" #bwl					\
+		     : "+D"(addr), "+c"(count) : "d"(port));		\
+}
+
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
 
 extern void *xlate_dev_mem_ptr(unsigned long phys);
 extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
@@ -198,6 +347,7 @@ extern void __iomem *early_ioremap(resource_size_t phys_addr,
 extern void __iomem *early_memremap(resource_size_t phys_addr,
 				    unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
+extern void fixup_early_ioremap(void);
 
 #define IO_SPACE_LIMIT 0xffff
 
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
deleted file mode 100644
index a299900..0000000
--- a/arch/x86/include/asm/io_32.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef _ASM_X86_IO_32_H
-#define _ASM_X86_IO_32_H
-
-#include <linux/string.h>
-#include <linux/compiler.h>
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/iomap.h>
-
-#include <linux/vmalloc.h>
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-static inline void
-memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	memset((void __force *)addr, val, count);
-}
-
-static inline void
-memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	__memcpy(dst, (const void __force *)src, count);
-}
-
-static inline void
-memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	__memcpy((void __force *)dst, src, count);
-}
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-/*
- *	Cache management
- *
- *	This needed for two cases
- *	1. Out of order aware processors
- *	2. Accidentally out of order processors (PPro errata #51)
- */
-
-#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
-
-static inline void flush_write_buffers(void)
-{
-	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
-}
-
-#else
-
-#define flush_write_buffers() do { } while (0)
-
-#endif
-
-#endif /* __KERNEL__ */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
-	native_io_delay();
-#ifdef REALLY_SLOW_IO
-	native_io_delay();
-	native_io_delay();
-	native_io_delay();
-#endif
-}
-
-#endif
-
-#define __BUILDIO(bwl, bw, type)				\
-static inline void out##bwl(unsigned type value, int port)	\
-{								\
-	out##bwl##_local(value, port);				\
-}								\
-								\
-static inline unsigned type in##bwl(int port)			\
-{								\
-	return in##bwl##_local(port);				\
-}
-
-#define BUILDIO(bwl, bw, type)						\
-static inline void out##bwl##_local(unsigned type value, int port)	\
-{									\
-	asm volatile("out" #bwl " %" #bw "0, %w1"		\
-		     : : "a"(value), "Nd"(port));			\
-}									\
-									\
-static inline unsigned type in##bwl##_local(int port)			\
-{									\
-	unsigned type value;						\
-	asm volatile("in" #bwl " %w1, %" #bw "0"		\
-		     : "=a"(value) : "Nd"(port));			\
-	return value;							\
-}									\
-									\
-static inline void out##bwl##_local_p(unsigned type value, int port)	\
-{									\
-	out##bwl##_local(value, port);					\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_local_p(int port)			\
-{									\
-	unsigned type value = in##bwl##_local(port);			\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-__BUILDIO(bwl, bw, type)						\
-									\
-static inline void out##bwl##_p(unsigned type value, int port)		\
-{									\
-	out##bwl(value, port);						\
-	slow_down_io();							\
-}									\
-									\
-static inline unsigned type in##bwl##_p(int port)			\
-{									\
-	unsigned type value = in##bwl(port);				\
-	slow_down_io();							\
-	return value;							\
-}									\
-									\
-static inline void outs##bwl(int port, const void *addr, unsigned long count) \
-{									\
-	asm volatile("rep; outs" #bwl					\
-		     : "+S"(addr), "+c"(count) : "d"(port));		\
-}									\
-									\
-static inline void ins##bwl(int port, void *addr, unsigned long count)	\
-{									\
-	asm volatile("rep; ins" #bwl					\
-		     : "+D"(addr), "+c"(count) : "d"(port));		\
-}
-
-BUILDIO(b, b, char)
-BUILDIO(w, w, short)
-BUILDIO(l, , int)
-
-#endif /* _ASM_X86_IO_32_H */
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
deleted file mode 100644
index 2440678..0000000
--- a/arch/x86/include/asm/io_64.h
+++ /dev/null
@@ -1,181 +0,0 @@
-#ifndef _ASM_X86_IO_64_H
-#define _ASM_X86_IO_64_H
-
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-extern void native_io_delay(void);
-
-extern int io_delay_type;
-extern void io_delay_init(void);
-
-#if defined(CONFIG_PARAVIRT)
-#include <asm/paravirt.h>
-#else
-
-static inline void slow_down_io(void)
-{
-	native_io_delay();
-#ifdef REALLY_SLOW_IO
-	native_io_delay();
-	native_io_delay();
-	native_io_delay();
-#endif
-}
-#endif
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s, x)							\
-static inline void out##s(unsigned x value, unsigned short port) {
-
-#define __OUT2(s, s1, s2)				\
-asm volatile ("out" #s " %" s1 "0,%" s2 "1"
-
-#ifndef REALLY_SLOW_IO
-#define REALLY_SLOW_IO
-#define UNSET_REALLY_SLOW_IO
-#endif
-
-#define __OUT(s, s1, x)							\
-	__OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port));	\
-	}								\
-	__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
-	slow_down_io();							\
-}
-
-#define __IN1(s)							\
-static inline RETURN_TYPE in##s(unsigned short port)			\
-{									\
-	RETURN_TYPE _v;
-
-#define __IN2(s, s1, s2)						\
-	asm volatile ("in" #s " %" s2 "1,%" s1 "0"
-
-#define __IN(s, s1, i...)						\
-	__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
-	return _v;							\
-	}								\
-	__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
-	slow_down_io(); \
-	return _v; }
-
-#ifdef UNSET_REALLY_SLOW_IO
-#undef REALLY_SLOW_IO
-#endif
-
-#define __INS(s)							\
-static inline void ins##s(unsigned short port, void *addr,		\
-			  unsigned long count)				\
-{									\
-	asm volatile ("rep ; ins" #s					\
-		      : "=D" (addr), "=c" (count)			\
-		      : "d" (port), "0" (addr), "1" (count));		\
-}
-
-#define __OUTS(s)							\
-static inline void outs##s(unsigned short port, const void *addr,	\
-			   unsigned long count)				\
-{									\
-	asm volatile ("rep ; outs" #s					\
-		      : "=S" (addr), "=c" (count)			\
-		      : "d" (port), "0" (addr), "1" (count));		\
-}
-
-#define RETURN_TYPE unsigned char
-__IN(b, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w, "")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l, "")
-#undef RETURN_TYPE
-
-__OUT(b, "b", char)
-__OUT(w, "w", short)
-__OUT(l, , int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
-
-#if defined(__KERNEL__) && defined(__x86_64__)
-
-#include <linux/vmalloc.h>
-
-#include <asm-generic/iomap.h>
-
-void __memcpy_fromio(void *, unsigned long, unsigned);
-void __memcpy_toio(unsigned long, const void *, unsigned);
-
-static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
-				 unsigned len)
-{
-	__memcpy_fromio(to, (unsigned long)from, len);
-}
-
-static inline void memcpy_toio(volatile void __iomem *to, const void *from,
-			       unsigned len)
-{
-	__memcpy_toio((unsigned long)to, from, len);
-}
-
-void memset_io(volatile void __iomem *a, int b, size_t c);
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-
-#define flush_write_buffers()
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_X86_IO_64_H */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 7c7c16c..9cb2edb 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -143,8 +143,6 @@ extern int noioapicreroute;
 /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
 extern int timer_through_8259;
 
-extern void io_apic_disable_legacy(void);
-
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
@@ -160,7 +158,7 @@ extern int io_apic_get_redir_entries(int ioapic);
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
 		 struct io_apic_irq_attr *irq_attr);
-extern int (*ioapic_renumber_irq)(int ioapic, int irq);
+void setup_IO_APIC_irq_extra(u32 gsi);
 extern void ioapic_init_mappings(void);
 extern void ioapic_insert_resources(void);
 
@@ -181,13 +179,15 @@ extern void ioapic_write_entry(int apic, int pin,
 extern void setup_ioapic_ids_from_mpc(void);
 
 struct mp_ioapic_gsi{
-	int gsi_base;
-	int gsi_end;
+	u32 gsi_base;
+	u32 gsi_end;
 };
 extern struct mp_ioapic_gsi  mp_gsi_routing[];
-int mp_find_ioapic(int gsi);
-int mp_find_ioapic_pin(int ioapic, int gsi);
+extern u32 gsi_top;
+int mp_find_ioapic(u32 gsi);
+int mp_find_ioapic_pin(int ioapic, u32 gsi);
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+extern void __init pre_init_apic_IRQ0(void);
 
 #else  /* !CONFIG_X86_IO_APIC */
 
@@ -197,7 +197,12 @@ static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
 static inline void probe_nr_irqs_gsi(void)	{ }
+#define gsi_top (NR_IRQS_LEGACY)
+static inline int mp_find_ioapic(u32 gsi) { return 0; }
 
+struct io_apic_irq_attr;
+static inline int io_apic_set_pci_routing(struct device *dev, int irq,
+		 struct io_apic_irq_attr *irq_attr) { return 0; }
 #endif
 
 #endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 4611f08..8767d99 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -28,28 +28,33 @@
 #define MCE_VECTOR			0x12
 
 /*
- * IDT vectors usable for external interrupt sources start
- * at 0x20:
+ * IDT vectors usable for external interrupt sources start at 0x20.
+ * (0x80 is the syscall vector, 0x30-0x3f are for ISA)
  */
 #define FIRST_EXTERNAL_VECTOR		0x20
-
-#ifdef CONFIG_X86_32
-# define SYSCALL_VECTOR			0x80
-# define IA32_SYSCALL_VECTOR		0x80
-#else
-# define IA32_SYSCALL_VECTOR		0x80
-#endif
+/*
+ * We start allocating at 0x21 to spread out vectors evenly between
+ * priority levels. (0x80 is the syscall vector)
+ */
+#define VECTOR_OFFSET_START		1
 
 /*
- * Reserve the lowest usable priority level 0x20 - 0x2f for triggering
- * cleanup after irq migration.
+ * Reserve the lowest usable vector (and hence lowest priority)  0x20 for
+ * triggering cleanup after irq migration. 0x21-0x2f will still be used
+ * for device interrupts.
  */
 #define IRQ_MOVE_CLEANUP_VECTOR		FIRST_EXTERNAL_VECTOR
 
+#define IA32_SYSCALL_VECTOR		0x80
+#ifdef CONFIG_X86_32
+# define SYSCALL_VECTOR			0x80
+#endif
+
 /*
  * Vectors 0x30-0x3f are used for ISA interrupts.
+ *   round up to the next 16-vector boundary
  */
-#define IRQ0_VECTOR			(FIRST_EXTERNAL_VECTOR + 0x10)
+#define IRQ0_VECTOR			((FIRST_EXTERNAL_VECTOR + 16) & ~15)
 
 #define IRQ1_VECTOR			(IRQ0_VECTOR +  1)
 #define IRQ2_VECTOR			(IRQ0_VECTOR +  2)
@@ -120,13 +125,6 @@
  */
 #define MCE_SELF_VECTOR			0xeb
 
-/*
- * First APIC vector available to drivers: (vectors 0x30-0xee) we
- * start at 0x31(0x41) to spread out vectors evenly between priority
- * levels. (0x80 is the syscall vector)
- */
-#define FIRST_DEVICE_VECTOR		(IRQ15_VECTOR + 2)
-
 #define NR_VECTORS			 256
 
 #define FPU_IRQ				  13
@@ -154,21 +152,21 @@ static inline int invalid_vm86_irq(int irq)
 
 #define NR_IRQS_LEGACY			  16
 
-#define CPU_VECTOR_LIMIT		(  8 * NR_CPUS      )
 #define IO_APIC_VECTOR_LIMIT		( 32 * MAX_IO_APICS )
 
 #ifdef CONFIG_X86_IO_APIC
 # ifdef CONFIG_SPARSE_IRQ
+#  define CPU_VECTOR_LIMIT		(64 * NR_CPUS)
 #  define NR_IRQS					\
 	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?	\
 		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
 		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
 # else
-#  if NR_CPUS < MAX_IO_APICS
-#   define NR_IRQS 			(NR_VECTORS + 4*CPU_VECTOR_LIMIT)
-#  else
-#   define NR_IRQS			(NR_VECTORS + IO_APIC_VECTOR_LIMIT)
-#  endif
+#  define CPU_VECTOR_LIMIT		(32 * NR_CPUS)
+#  define NR_IRQS					\
+	(CPU_VECTOR_LIMIT < IO_APIC_VECTOR_LIMIT ?	\
+		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
+		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
 # endif
 #else /* !CONFIG_X86_IO_APIC: */
 # define NR_IRQS			NR_IRQS_LEGACY
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
index f70e600..af00bd1 100644
--- a/arch/x86/include/asm/k8.h
+++ b/arch/x86/include/asm/k8.h
@@ -16,11 +16,16 @@ extern int k8_numa_init(unsigned long start_pfn, unsigned long end_pfn);
 extern int k8_scan_nodes(void);
 
 #ifdef CONFIG_K8_NB
+extern int num_k8_northbridges;
+
 static inline struct pci_dev *node_to_k8_nb_misc(int node)
 {
 	return (node < num_k8_northbridges) ? k8_northbridges[node] : NULL;
 }
+
 #else
+#define num_k8_northbridges 0
+
 static inline struct pci_dev *node_to_k8_nb_misc(int node)
 {
 	return NULL;
diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h
index e6c6c80..006da36 100644
--- a/arch/x86/include/asm/kgdb.h
+++ b/arch/x86/include/asm/kgdb.h
@@ -76,4 +76,7 @@ static inline void arch_kgdb_breakpoint(void)
 #define BREAK_INSTR_SIZE	1
 #define CACHE_FLUSH_IS_SAFE	1
 
+extern int kgdb_ll_trap(int cmd, const char *str,
+			struct pt_regs *regs, long err, int trap, int sig);
+
 #endif /* _ASM_X86_KGDB_H */
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 4fe681d..5478825 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -24,6 +24,7 @@
 #include <linux/types.h>
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
+#include <asm/insn.h>
 
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
 
@@ -32,8 +33,10 @@ struct kprobe;
 
 typedef u8 kprobe_opcode_t;
 #define BREAKPOINT_INSTRUCTION	0xcc
-#define RELATIVEJUMP_INSTRUCTION 0xe9
-#define MAX_INSN_SIZE 16
+#define RELATIVEJUMP_OPCODE 0xe9
+#define RELATIVEJUMP_SIZE 5
+#define RELATIVECALL_OPCODE 0xe8
+#define RELATIVE_ADDR_SIZE 4
 #define MAX_STACK_SIZE 64
 #define MIN_STACK_SIZE(ADDR)					       \
 	(((MAX_STACK_SIZE) < (((unsigned long)current_thread_info()) + \
@@ -44,6 +47,17 @@ typedef u8 kprobe_opcode_t;
 
 #define flush_insn_slot(p)	do { } while (0)
 
+/* optinsn template addresses */
+extern kprobe_opcode_t optprobe_template_entry;
+extern kprobe_opcode_t optprobe_template_val;
+extern kprobe_opcode_t optprobe_template_call;
+extern kprobe_opcode_t optprobe_template_end;
+#define MAX_OPTIMIZED_LENGTH (MAX_INSN_SIZE + RELATIVE_ADDR_SIZE)
+#define MAX_OPTINSN_SIZE 				\
+	(((unsigned long)&optprobe_template_end -	\
+	  (unsigned long)&optprobe_template_entry) +	\
+	 MAX_OPTIMIZED_LENGTH + RELATIVEJUMP_SIZE)
+
 extern const int kretprobe_blacklist_size;
 
 void arch_remove_kprobe(struct kprobe *p);
@@ -64,6 +78,21 @@ struct arch_specific_insn {
 	int boostable;
 };
 
+struct arch_optimized_insn {
+	/* copy of the original instructions */
+	kprobe_opcode_t copied_insn[RELATIVE_ADDR_SIZE];
+	/* detour code buffer */
+	kprobe_opcode_t *insn;
+	/* the size of instructions copied to detour code buffer */
+	size_t size;
+};
+
+/* Return true (!0) if optinsn is prepared for optimization. */
+static inline int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
+{
+	return optinsn->size;
+}
+
 struct prev_kprobe {
 	struct kprobe *kp;
 	unsigned long status;
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index f46b79f..ff90055 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -21,6 +21,7 @@
 #define __KVM_HAVE_PIT_STATE2
 #define __KVM_HAVE_XEN_HVM
 #define __KVM_HAVE_VCPU_EVENTS
+#define __KVM_HAVE_DEBUGREGS
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -257,6 +258,11 @@ struct kvm_reinject_control {
 /* When set in flags, include corresponding fields on KVM_SET_VCPU_EVENTS */
 #define KVM_VCPUEVENT_VALID_NMI_PENDING	0x00000001
 #define KVM_VCPUEVENT_VALID_SIPI_VECTOR	0x00000002
+#define KVM_VCPUEVENT_VALID_SHADOW	0x00000004
+
+/* Interrupt shadow states */
+#define KVM_X86_SHADOW_INT_MOV_SS	0x01
+#define KVM_X86_SHADOW_INT_STI		0x02
 
 /* for KVM_GET/SET_VCPU_EVENTS */
 struct kvm_vcpu_events {
@@ -271,7 +277,7 @@ struct kvm_vcpu_events {
 		__u8 injected;
 		__u8 nr;
 		__u8 soft;
-		__u8 pad;
+		__u8 shadow;
 	} interrupt;
 	struct {
 		__u8 injected;
@@ -284,4 +290,13 @@ struct kvm_vcpu_events {
 	__u32 reserved[10];
 };
 
+/* for KVM_GET/SET_DEBUGREGS */
+struct kvm_debugregs {
+	__u64 db[4];
+	__u64 dr6;
+	__u64 dr7;
+	__u64 flags;
+	__u64 reserved[9];
+};
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 7c18e12..0b2729b 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -11,6 +11,8 @@
 #ifndef _ASM_X86_KVM_X86_EMULATE_H
 #define _ASM_X86_KVM_X86_EMULATE_H
 
+#include <asm/desc_defs.h>
+
 struct x86_emulate_ctxt;
 
 /*
@@ -54,13 +56,32 @@ struct x86_emulate_ctxt;
 struct x86_emulate_ops {
 	/*
 	 * read_std: Read bytes of standard (non-emulated/special) memory.
-	 *           Used for instruction fetch, stack operations, and others.
+	 *           Used for descriptor reading.
 	 *  @addr:  [IN ] Linear address from which to read.
 	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
 	 *  @bytes: [IN ] Number of bytes to read from memory.
 	 */
 	int (*read_std)(unsigned long addr, void *val,
-			unsigned int bytes, struct kvm_vcpu *vcpu);
+			unsigned int bytes, struct kvm_vcpu *vcpu, u32 *error);
+
+	/*
+	 * write_std: Write bytes of standard (non-emulated/special) memory.
+	 *            Used for descriptor writing.
+	 *  @addr:  [IN ] Linear address to which to write.
+	 *  @val:   [OUT] Value write to memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to write to memory.
+	 */
+	int (*write_std)(unsigned long addr, void *val,
+			 unsigned int bytes, struct kvm_vcpu *vcpu, u32 *error);
+	/*
+	 * fetch: Read bytes of standard (non-emulated/special) memory.
+	 *        Used for instruction fetch.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*fetch)(unsigned long addr, void *val,
+			unsigned int bytes, struct kvm_vcpu *vcpu, u32 *error);
 
 	/*
 	 * read_emulated: Read bytes from emulated/special memory area.
@@ -74,7 +95,7 @@ struct x86_emulate_ops {
 			     struct kvm_vcpu *vcpu);
 
 	/*
-	 * write_emulated: Read bytes from emulated/special memory area.
+	 * write_emulated: Write bytes to emulated/special memory area.
 	 *  @addr:  [IN ] Linear address to which to write.
 	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
 	 *                required).
@@ -99,6 +120,23 @@ struct x86_emulate_ops {
 				unsigned int bytes,
 				struct kvm_vcpu *vcpu);
 
+	int (*pio_in_emulated)(int size, unsigned short port, void *val,
+			       unsigned int count, struct kvm_vcpu *vcpu);
+
+	int (*pio_out_emulated)(int size, unsigned short port, const void *val,
+				unsigned int count, struct kvm_vcpu *vcpu);
+
+	bool (*get_cached_descriptor)(struct desc_struct *desc,
+				      int seg, struct kvm_vcpu *vcpu);
+	void (*set_cached_descriptor)(struct desc_struct *desc,
+				      int seg, struct kvm_vcpu *vcpu);
+	u16 (*get_segment_selector)(int seg, struct kvm_vcpu *vcpu);
+	void (*set_segment_selector)(u16 sel, int seg, struct kvm_vcpu *vcpu);
+	void (*get_gdt)(struct desc_ptr *dt, struct kvm_vcpu *vcpu);
+	ulong (*get_cr)(int cr, struct kvm_vcpu *vcpu);
+	void (*set_cr)(int cr, ulong val, struct kvm_vcpu *vcpu);
+	int (*cpl)(struct kvm_vcpu *vcpu);
+	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
 };
 
 /* Type, address-of, and value of an instruction's operand. */
@@ -114,6 +152,12 @@ struct fetch_cache {
 	unsigned long end;
 };
 
+struct read_cache {
+	u8 data[1024];
+	unsigned long pos;
+	unsigned long end;
+};
+
 struct decode_cache {
 	u8 twobyte;
 	u8 b;
@@ -129,7 +173,7 @@ struct decode_cache {
 	u8 seg_override;
 	unsigned int d;
 	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip, eip_orig;
+	unsigned long eip;
 	/* modrm */
 	u8 modrm;
 	u8 modrm_mod;
@@ -141,16 +185,15 @@ struct decode_cache {
 	void *modrm_ptr;
 	unsigned long modrm_val;
 	struct fetch_cache fetch;
+	struct read_cache io_read;
 };
 
-#define X86_SHADOW_INT_MOV_SS  1
-#define X86_SHADOW_INT_STI     2
-
 struct x86_emulate_ctxt {
 	/* Register state before/after emulation. */
 	struct kvm_vcpu *vcpu;
 
 	unsigned long eflags;
+	unsigned long eip; /* eip before instruction emulation */
 	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
 	int mode;
 	u32 cs_base;
@@ -158,6 +201,7 @@ struct x86_emulate_ctxt {
 	/* interruptibility state, as a result of execution of STI or MOV SS */
 	int interruptibility;
 
+	bool restart; /* restart string instruction after writeback */
 	/* decode cache */
 	struct decode_cache decode;
 };
@@ -168,6 +212,7 @@ struct x86_emulate_ctxt {
 
 /* Execution mode, passed to the emulator. */
 #define X86EMUL_MODE_REAL     0	/* Real mode.             */
+#define X86EMUL_MODE_VM86     1	/* Virtual 8086 mode.     */
 #define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
 #define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
 #define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
@@ -183,5 +228,9 @@ int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
 		    struct x86_emulate_ops *ops);
 int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
 		     struct x86_emulate_ops *ops);
+int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
+			 struct x86_emulate_ops *ops,
+			 u16 tss_selector, int reason,
+			 bool has_error_code, u32 error_code);
 
 #endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 4f865e8..76f5483 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -25,7 +25,7 @@
 #include <asm/mtrr.h>
 #include <asm/msr-index.h>
 
-#define KVM_MAX_VCPUS 16
+#define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
 /* memory slots that does not exposed to userspace */
 #define KVM_PRIVATE_MEM_SLOTS 4
@@ -38,19 +38,6 @@
 #define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
 				  0xFFFFFF0000000000ULL)
 
-#define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
-	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
-#define KVM_GUEST_CR0_MASK						\
-	(KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
-#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST				\
-	(X86_CR0_WP | X86_CR0_NE | X86_CR0_TS | X86_CR0_MP)
-#define KVM_VM_CR0_ALWAYS_ON						\
-	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
-#define KVM_GUEST_CR4_MASK						\
-	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
-#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
-#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
-
 #define INVALID_PAGE (~(hpa_t)0)
 #define UNMAPPED_GVA (~(gpa_t)0)
 
@@ -184,15 +171,15 @@ struct kvm_pte_chain {
 union kvm_mmu_page_role {
 	unsigned word;
 	struct {
-		unsigned glevels:4;
 		unsigned level:4;
+		unsigned cr4_pae:1;
 		unsigned quadrant:2;
 		unsigned pad_for_nice_hex_output:6;
 		unsigned direct:1;
 		unsigned access:3;
 		unsigned invalid:1;
-		unsigned cr4_pge:1;
 		unsigned nxe:1;
+		unsigned cr0_wp:1;
 	};
 };
 
@@ -200,8 +187,6 @@ struct kvm_mmu_page {
 	struct list_head link;
 	struct hlist_node hash_link;
 
-	struct list_head oos_link;
-
 	/*
 	 * The following two entries are used to key the shadow page in the
 	 * hash table.
@@ -217,9 +202,9 @@ struct kvm_mmu_page {
 	 * in this shadow page.
 	 */
 	DECLARE_BITMAP(slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS);
-	int multimapped;         /* More than one parent_pte? */
-	int root_count;          /* Currently serving as active root */
+	bool multimapped;         /* More than one parent_pte? */
 	bool unsync;
+	int root_count;          /* Currently serving as active root */
 	unsigned int unsync_children;
 	union {
 		u64 *parent_pte;               /* !multimapped */
@@ -237,14 +222,9 @@ struct kvm_pv_mmu_op_buffer {
 
 struct kvm_pio_request {
 	unsigned long count;
-	int cur_count;
-	gva_t guest_gva;
 	int in;
 	int port;
 	int size;
-	int string;
-	int down;
-	int rep;
 };
 
 /*
@@ -256,7 +236,8 @@ struct kvm_mmu {
 	void (*new_cr3)(struct kvm_vcpu *vcpu);
 	int (*page_fault)(struct kvm_vcpu *vcpu, gva_t gva, u32 err);
 	void (*free)(struct kvm_vcpu *vcpu);
-	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva);
+	gpa_t (*gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t gva, u32 access,
+			    u32 *error);
 	void (*prefetch_page)(struct kvm_vcpu *vcpu,
 			      struct kvm_mmu_page *page);
 	int (*sync_page)(struct kvm_vcpu *vcpu,
@@ -282,13 +263,15 @@ struct kvm_vcpu_arch {
 	u32 regs_dirty;
 
 	unsigned long cr0;
+	unsigned long cr0_guest_owned_bits;
 	unsigned long cr2;
 	unsigned long cr3;
 	unsigned long cr4;
+	unsigned long cr4_guest_owned_bits;
 	unsigned long cr8;
 	u32 hflags;
 	u64 pdptrs[4]; /* pae */
-	u64 shadow_efer;
+	u64 efer;
 	u64 apic_base;
 	struct kvm_lapic *apic;    /* kernel irqchip context */
 	int32_t apic_arb_prio;
@@ -330,6 +313,7 @@ struct kvm_vcpu_arch {
 	struct kvm_queued_exception {
 		bool pending;
 		bool has_error_code;
+		bool reinject;
 		u8 nr;
 		u32 error_code;
 	} exception;
@@ -372,23 +356,34 @@ struct kvm_vcpu_arch {
 	u64 *mce_banks;
 
 	/* used for guest single stepping over the given code position */
-	u16 singlestep_cs;
 	unsigned long singlestep_rip;
+
+	/* fields used by HYPER-V emulation */
+	u64 hv_vapic;
 };
 
 struct kvm_mem_alias {
 	gfn_t base_gfn;
 	unsigned long npages;
 	gfn_t target_gfn;
+#define KVM_ALIAS_INVALID     1UL
+	unsigned long flags;
 };
 
-struct kvm_arch{
-	int naliases;
+#define KVM_ARCH_HAS_UNALIAS_INSTANTIATION
+
+struct kvm_mem_aliases {
 	struct kvm_mem_alias aliases[KVM_ALIAS_SLOTS];
+	int naliases;
+};
+
+struct kvm_arch {
+	struct kvm_mem_aliases *aliases;
 
 	unsigned int n_free_mmu_pages;
 	unsigned int n_requested_mmu_pages;
 	unsigned int n_alloc_mmu_pages;
+	atomic_t invlpg_counter;
 	struct hlist_head mmu_page_hash[KVM_NUM_MMU_PAGES];
 	/*
 	 * Hash table of struct kvm_mmu_page.
@@ -416,6 +411,10 @@ struct kvm_arch{
 	s64 kvmclock_offset;
 
 	struct kvm_xen_hvm_config xen_hvm_config;
+
+	/* fields used by HYPER-V emulation */
+	u64 hv_guest_os_id;
+	u64 hv_hypercall;
 };
 
 struct kvm_vm_stat {
@@ -457,11 +456,6 @@ struct kvm_vcpu_stat {
 	u32 nmi_injections;
 };
 
-struct descriptor_table {
-	u16 limit;
-	unsigned long base;
-} __attribute__((packed));
-
 struct kvm_x86_ops {
 	int (*cpu_has_kvm_support)(void);          /* __init */
 	int (*disabled_by_bios)(void);             /* __init */
@@ -471,6 +465,7 @@ struct kvm_x86_ops {
 	int (*hardware_setup)(void);               /* __init */
 	void (*hardware_unsetup)(void);            /* __exit */
 	bool (*cpu_has_accelerated_tpr)(void);
+	void (*cpuid_update)(struct kvm_vcpu *vcpu);
 
 	/* Create, but do not attach this VCPU */
 	struct kvm_vcpu *(*vcpu_create)(struct kvm *kvm, unsigned id);
@@ -492,21 +487,22 @@ struct kvm_x86_ops {
 	void (*set_segment)(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg);
 	void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
+	void (*decache_cr0_guest_bits)(struct kvm_vcpu *vcpu);
 	void (*decache_cr4_guest_bits)(struct kvm_vcpu *vcpu);
 	void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
 	void (*set_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
 	void (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
 	void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
-	void (*get_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*set_idt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*get_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	void (*set_gdt)(struct kvm_vcpu *vcpu, struct descriptor_table *dt);
-	unsigned long (*get_dr)(struct kvm_vcpu *vcpu, int dr);
-	void (*set_dr)(struct kvm_vcpu *vcpu, int dr, unsigned long value,
-		       int *exception);
+	void (*get_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
+	void (*set_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
+	void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
+	void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
+	void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value);
 	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
 	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
 	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+	void (*fpu_activate)(struct kvm_vcpu *vcpu);
+	void (*fpu_deactivate)(struct kvm_vcpu *vcpu);
 
 	void (*tlb_flush)(struct kvm_vcpu *vcpu);
 
@@ -520,7 +516,8 @@ struct kvm_x86_ops {
 	void (*set_irq)(struct kvm_vcpu *vcpu);
 	void (*set_nmi)(struct kvm_vcpu *vcpu);
 	void (*queue_exception)(struct kvm_vcpu *vcpu, unsigned nr,
-				bool has_error_code, u32 error_code);
+				bool has_error_code, u32 error_code,
+				bool reinject);
 	int (*interrupt_allowed)(struct kvm_vcpu *vcpu);
 	int (*nmi_allowed)(struct kvm_vcpu *vcpu);
 	bool (*get_nmi_mask)(struct kvm_vcpu *vcpu);
@@ -531,7 +528,10 @@ struct kvm_x86_ops {
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
 	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
-	bool (*gb_page_enable)(void);
+	int (*get_lpage_level)(void);
+	bool (*rdtscp_supported)(void);
+
+	void (*set_supported_cpuid)(u32 func, struct kvm_cpuid_entry2 *entry);
 
 	const struct trace_print_flags *exit_reasons_str;
 };
@@ -579,23 +579,14 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
 void realmode_lidt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
-void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
-		   unsigned long *rflags);
 
-unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr);
-void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long value,
-		     unsigned long *rflags);
 void kvm_enable_efer_bits(u64);
 int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *data);
 int kvm_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 
 struct x86_emulate_ctxt;
 
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in,
-		     int size, unsigned port);
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
-			   int size, unsigned long count, int down,
-			    gva_t address, int rep, unsigned port);
+int kvm_fast_pio_out(struct kvm_vcpu *vcpu, int size, unsigned short port);
 void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
 int kvm_emulate_halt(struct kvm_vcpu *vcpu);
 int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address);
@@ -606,15 +597,17 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr,
 		    unsigned long value);
 
 void kvm_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
-int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				int type_bits, int seg);
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, int seg);
 
-int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason);
+int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
+		    bool has_error_code, u32 error_code);
 
 void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
 void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
 void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8);
+int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val);
+int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val);
 unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw);
 void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l);
@@ -627,6 +620,8 @@ void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
 
 void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
+void kvm_requeue_exception(struct kvm_vcpu *vcpu, unsigned nr);
+void kvm_requeue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
 			   u32 error_code);
 bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl);
@@ -642,8 +637,6 @@ int emulator_write_emulated(unsigned long addr,
 			    unsigned int bytes,
 			    struct kvm_vcpu *vcpu);
 
-unsigned long segment_base(u16 selector);
-
 void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu);
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		       const u8 *new, int bytes,
@@ -653,6 +646,10 @@ void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
 int kvm_mmu_load(struct kvm_vcpu *vcpu);
 void kvm_mmu_unload(struct kvm_vcpu *vcpu);
 void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu);
+gpa_t kvm_mmu_gva_to_gpa_read(struct kvm_vcpu *vcpu, gva_t gva, u32 *error);
+gpa_t kvm_mmu_gva_to_gpa_fetch(struct kvm_vcpu *vcpu, gva_t gva, u32 *error);
+gpa_t kvm_mmu_gva_to_gpa_write(struct kvm_vcpu *vcpu, gva_t gva, u32 *error);
+gpa_t kvm_mmu_gva_to_gpa_system(struct kvm_vcpu *vcpu, gva_t gva, u32 *error);
 
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 
@@ -664,8 +661,8 @@ void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva);
 void kvm_enable_tdp(void);
 void kvm_disable_tdp(void);
 
-int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3);
 int complete_pio(struct kvm_vcpu *vcpu);
+bool kvm_check_iopl(struct kvm_vcpu *vcpu);
 
 struct kvm_memory_slot *gfn_to_memslot_unaliased(struct kvm *kvm, gfn_t gfn);
 
@@ -712,23 +709,6 @@ static inline void kvm_load_ldt(u16 sel)
 	asm("lldt %0" : : "rm"(sel));
 }
 
-static inline void kvm_get_idt(struct descriptor_table *table)
-{
-	asm("sidt %0" : "=m"(*table));
-}
-
-static inline void kvm_get_gdt(struct descriptor_table *table)
-{
-	asm("sgdt %0" : "=m"(*table));
-}
-
-static inline unsigned long kvm_read_tr_base(void)
-{
-	u16 tr;
-	asm("str %0" : "=g"(tr));
-	return segment_base(tr);
-}
-
 #ifdef CONFIG_X86_64
 static inline unsigned long read_msr(unsigned long msr)
 {
@@ -814,4 +794,6 @@ int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 void kvm_define_shared_msr(unsigned index, u32 msr);
 void kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
 
+bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip);
+
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index c584076..05eba5e 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_KVM_PARA_H
 
 #include <linux/types.h>
+#include <asm/hyperv.h>
 
 /* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
  * should be used to determine that a VM is running under KVM.
@@ -15,10 +16,23 @@
 #define KVM_FEATURE_CLOCKSOURCE		0
 #define KVM_FEATURE_NOP_IO_DELAY	1
 #define KVM_FEATURE_MMU_OP		2
+/* This indicates that the new set of kvmclock msrs
+ * are available. The use of 0x11 and 0x12 is deprecated
+ */
+#define KVM_FEATURE_CLOCKSOURCE2        3
+
+/* The last 8 bits are used to indicate how to interpret the flags field
+ * in pvclock structure. If no bits are set, all flags are ignored.
+ */
+#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT	24
 
 #define MSR_KVM_WALL_CLOCK  0x11
 #define MSR_KVM_SYSTEM_TIME 0x12
 
+/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
+#define MSR_KVM_WALL_CLOCK_NEW  0x4b564d00
+#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
+
 #define KVM_MAX_MMU_OP_BATCH           32
 
 /* Operations for KVM_HC_MMU_OP */
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index ba0eed8..b60f292 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -28,22 +28,39 @@
 
 #ifndef __ASSEMBLY__
 #include <asm/hw_irq.h>
-#include <asm/kvm_para.h>
 
 /*G:030
  * But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism, though completely different hypercall
- * numbers. Seventeen hypercalls are available: the hypercall number is put in
- * the %eax register, and the arguments (when required) are placed in %ebx,
- * %ecx, %edx and %esi.  If a return value makes sense, it's returned in %eax.
+ * Our hypercall mechanism uses the highest unused trap code (traps 32 and
+ * above are used by real hardware interrupts).  Seventeen hypercalls are
+ * available: the hypercall number is put in the %eax register, and the
+ * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
+ * If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
  * definition of a gentleman: "someone who is only rude intentionally".
-:*/
+ */
+static inline unsigned long
+hcall(unsigned long call,
+      unsigned long arg1, unsigned long arg2, unsigned long arg3,
+      unsigned long arg4)
+{
+	/* "int" is the Intel instruction to trigger a trap. */
+	asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
+		     /* The call in %eax (aka "a") might be overwritten */
+		     : "=a"(call)
+		       /* The arguments are in %eax, %ebx, %ecx, %edx & %esi */
+		     : "a"(call), "b"(arg1), "c"(arg2), "d"(arg3), "S"(arg4)
+		       /* "memory" means this might write somewhere in memory.
+			* This isn't true for all calls, but it's safe to tell
+			* gcc that it might happen so it doesn't get clever. */
+		     : "memory");
+	return call;
+}
 
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h
index 47b9b6f..2e99724 100644
--- a/arch/x86/include/asm/local.h
+++ b/arch/x86/include/asm/local.h
@@ -195,41 +195,4 @@ static inline long local_sub_return(long i, local_t *l)
 #define __local_add(i, l)	local_add((i), (l))
 #define __local_sub(i, l)	local_sub((i), (l))
 
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations.  Note they take
- * a variable, not an address.
- *
- * X86_64: This could be done better if we moved the per cpu data directly
- * after GS.
- */
-
-/* Need to disable preemption for the cpu local counters otherwise we could
-   still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l)		\
-({					\
-	local_t res__;			\
-	preempt_disable(); 		\
-	res__ = (l);			\
-	preempt_enable();		\
-	res__;				\
-})
-#define cpu_local_wrap(l)		\
-({					\
-	preempt_disable();		\
-	(l);				\
-	preempt_enable();		\
-})					\
-
-#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var((l))))
-#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var((l)), (i)))
-#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var((l))))
-#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var((l))))
-#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var((l))))
-#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var((l))))
-
-#define __cpu_local_inc(l)	cpu_local_inc((l))
-#define __cpu_local_dec(l)	cpu_local_dec((l))
-#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
-
 #endif /* _ASM_X86_LOCAL_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 6c3fdd6..f32a430 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -225,5 +225,13 @@ extern void mcheck_intel_therm_init(void);
 static inline void mcheck_intel_therm_init(void) { }
 #endif
 
+/*
+ * Used by APEI to report memory error via /dev/mcelog
+ */
+
+struct cper_sec_mem_err;
+extern void apei_mce_report_mem_error(int corrected,
+				      struct cper_sec_mem_err *mem_err);
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
index a29f48c..288b96f 100644
--- a/arch/x86/include/asm/mmzone_64.h
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -39,11 +39,5 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
 #define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
 #define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
 				 NODE_DATA(nid)->node_spanned_pages)
-
-#ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE	(64 * 1024 * 1024)
-#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
-#endif
-
 #endif
 #endif /* _ASM_X86_MMZONE_64_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index d8bf23a..c82868e 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -105,16 +105,6 @@ extern void mp_config_acpi_legacy_irqs(void);
 struct device;
 extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
 				 int active_high_low);
-extern int acpi_probe_gsi(void);
-#ifdef CONFIG_X86_IO_APIC
-extern int mp_find_ioapic(int gsi);
-extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#endif
-#else /* !CONFIG_ACPI: */
-static inline int acpi_probe_gsi(void)
-{
-	return 0;
-}
 #endif /* CONFIG_ACPI */
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
new file mode 100644
index 0000000..451d30e
--- /dev/null
+++ b/arch/x86/include/asm/mrst.h
@@ -0,0 +1,19 @@
+/*
+ * mrst.h: Intel Moorestown platform specific setup code
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _ASM_X86_MRST_H
+#define _ASM_X86_MRST_H
+extern int pci_mrst_init(void);
+int __init sfi_parse_mrtc(struct sfi_table_header *table);
+
+#define SFI_MTMR_MAX_NUM 8
+#define SFI_MRTC_MAX	8
+
+#endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
new file mode 100644
index 0000000..79ce568
--- /dev/null
+++ b/arch/x86/include/asm/mshyperv.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_X86_MSHYPER_H
+#define _ASM_X86_MSHYPER_H
+
+#include <linux/types.h>
+#include <asm/hyperv.h>
+
+struct ms_hyperv_info {
+	u32 features;
+	u32 hints;
+};
+
+extern struct ms_hyperv_info ms_hyperv;
+
+#endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1cd58cd..8c7ae43 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -71,11 +71,14 @@
 #define MSR_IA32_LASTINTTOIP		0x000001de
 
 /* DEBUGCTLMSR bits (others vary by model): */
-#define _DEBUGCTLMSR_LBR	0 /* last branch recording */
-#define _DEBUGCTLMSR_BTF	1 /* single-step on branches */
-
-#define DEBUGCTLMSR_LBR		(1UL << _DEBUGCTLMSR_LBR)
-#define DEBUGCTLMSR_BTF		(1UL << _DEBUGCTLMSR_BTF)
+#define DEBUGCTLMSR_LBR			(1UL <<  0) /* last branch recording */
+#define DEBUGCTLMSR_BTF			(1UL <<  1) /* single-step on branches */
+#define DEBUGCTLMSR_TR			(1UL <<  6)
+#define DEBUGCTLMSR_BTS			(1UL <<  7)
+#define DEBUGCTLMSR_BTINT		(1UL <<  8)
+#define DEBUGCTLMSR_BTS_OFF_OS		(1UL <<  9)
+#define DEBUGCTLMSR_BTS_OFF_USR		(1UL << 10)
+#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI	(1UL << 11)
 
 #define MSR_IA32_MC0_CTL		0x00000400
 #define MSR_IA32_MC0_STATUS		0x00000401
@@ -105,6 +108,9 @@
 #define MSR_AMD64_PATCH_LEVEL		0x0000008b
 #define MSR_AMD64_NB_CFG		0xc001001f
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
+#define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
+#define MSR_AMD64_OSVW_STATUS		0xc0010141
+#define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_IBSFETCHCTL		0xc0011030
 #define MSR_AMD64_IBSFETCHLINAD		0xc0011031
 #define MSR_AMD64_IBSFETCHPHYSAD	0xc0011032
@@ -197,8 +203,9 @@
 #define MSR_IA32_EBL_CR_POWERON		0x0000002a
 #define MSR_IA32_FEATURE_CONTROL        0x0000003a
 
-#define FEATURE_CONTROL_LOCKED		(1<<0)
-#define FEATURE_CONTROL_VMXON_ENABLED	(1<<2)
+#define FEATURE_CONTROL_LOCKED				(1<<0)
+#define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX	(1<<1)
+#define FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX	(1<<2)
 
 #define MSR_IA32_APICBASE		0x0000001b
 #define MSR_IA32_APICBASE_BSP		(1<<8)
@@ -230,6 +237,8 @@
 
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
+#define MSR_IA32_TEMPERATURE_TARGET	0x000001a2
+
 /* MISC_ENABLE bits: architectural */
 #define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
 #define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
@@ -357,6 +366,8 @@
 #define MSR_P4_U2L_ESCR0		0x000003b0
 #define MSR_P4_U2L_ESCR1		0x000003b1
 
+#define MSR_P4_PEBS_MATRIX_VERT		0x000003f2
+
 /* Intel Core-based CPU performance counters */
 #define MSR_CORE_PERF_FIXED_CTR0	0x00000309
 #define MSR_CORE_PERF_FIXED_CTR1	0x0000030a
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 139d4c1..93da9c3 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -19,7 +19,6 @@ extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
 extern int nmi_watchdog_enabled;
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
-extern int avail_to_resrv_perfctr_nmi(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
 extern int reserve_evntsel_nmi(unsigned int);
diff --git a/arch/x86/include/asm/numa_64.h b/arch/x86/include/asm/numa_64.h
index c4ae822..823e070 100644
--- a/arch/x86/include/asm/numa_64.h
+++ b/arch/x86/include/asm/numa_64.h
@@ -36,6 +36,11 @@ extern void __cpuinit numa_set_node(int cpu, int node);
 extern void __cpuinit numa_clear_node(int cpu);
 extern void __cpuinit numa_add_cpu(int cpu);
 extern void __cpuinit numa_remove_cpu(int cpu);
+
+#ifdef CONFIG_NUMA_EMU
+#define FAKE_NODE_MIN_SIZE	((u64)64 << 20)
+#define FAKE_NODE_MIN_HASH_MASK	(~(FAKE_NODE_MIN_SIZE - 1UL))
+#endif /* CONFIG_NUMA_EMU */
 #else
 static inline void init_cpu_to_node(void)		{ }
 static inline void numa_set_node(int cpu, int node)	{ }
diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h
index 9f0a5f5..37c5165 100644
--- a/arch/x86/include/asm/numaq.h
+++ b/arch/x86/include/asm/numaq.h
@@ -30,9 +30,14 @@
 
 extern int found_numaq;
 extern int get_memcfg_numaq(void);
+extern int pci_numaq_init(void);
 
 extern void *xquad_portio;
 
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
+
 /*
  * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
  */
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 3a57385..101229b 100644
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h
@@ -13,7 +13,6 @@ struct olpc_platform_t {
 
 #define OLPC_F_PRESENT		0x01
 #define OLPC_F_DCON		0x02
-#define OLPC_F_VSA		0x04
 
 #ifdef CONFIG_OLPC
 
@@ -51,18 +50,6 @@ static inline int olpc_has_dcon(void)
 }
 
 /*
- * The VSA is software from AMD that typical Geode bioses will include.
- * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
- * not include the VSA; instead, PCI is emulated by the kernel.
- *
- * The VSA is described further in arch/x86/pci/olpc.c.
- */
-static inline int olpc_has_vsa(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-/*
  * The "Mass Production" version of OLPC's XO is identified as being model
  * C2.  During the prototype phase, the following models (in chronological
  * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
@@ -87,13 +74,10 @@ static inline int olpc_has_dcon(void)
 	return 0;
 }
 
-static inline int olpc_has_vsa(void)
-{
-	return 0;
-}
-
 #endif
 
+extern int pci_olpc_init(void);
+
 /* EC related functions */
 
 extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 642fe34..a667f24 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -40,7 +40,6 @@
 
 #ifndef __ASSEMBLY__
 
-extern int page_is_ram(unsigned long pagenr);
 extern int devmem_is_allowed(unsigned long pagenr);
 
 extern unsigned long max_low_pfn_mapped;
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index dd59a85..5653f43 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -435,15 +435,6 @@ static inline void paravirt_release_pud(unsigned long pfn)
 	PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
 }
 
-#ifdef CONFIG_HIGHPTE
-static inline void *kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	unsigned long ret;
-	ret = PVOP_CALL2(unsigned long, pv_mmu_ops.kmap_atomic_pte, page, type);
-	return (void *)ret;
-}
-#endif
-
 static inline void pte_update(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep)
 {
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index b1e70d5..db9ef55 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -304,10 +304,6 @@ struct pv_mmu_ops {
 #endif	/* PAGETABLE_LEVELS == 4 */
 #endif	/* PAGETABLE_LEVELS >= 3 */
 
-#ifdef CONFIG_HIGHPTE
-	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
 	struct pv_lazy_ops lazy_mode;
 
 	/* dom0 ops */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index ada8c20..404a880 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -45,8 +45,15 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 
 #ifdef CONFIG_PCI
 extern unsigned int pcibios_assign_all_busses(void);
+extern int pci_legacy_init(void);
+# ifdef CONFIG_ACPI
+#  define x86_default_pci_init pci_acpi_init
+# else
+#  define x86_default_pci_init pci_legacy_init
+# endif
 #else
-#define pcibios_assign_all_busses()	0
+# define pcibios_assign_all_busses()	0
+# define x86_default_pci_init		NULL
 #endif
 
 extern unsigned long pci_mem_start;
@@ -90,40 +97,14 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
-	        dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)         \
-	        __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME)                  \
-	        ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)         \
-	        (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME)                    \
-	        ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)           \
-	        (((PTR)->LEN_NAME) = (VAL))
-
-#else
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       dma_addr_t ADDR_NAME[0];
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0];
-#define pci_unmap_addr(PTR, ADDR_NAME)  sizeof((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
-	        do { break; } while (pci_unmap_addr(PTR, ADDR_NAME))
-#define pci_unmap_len(PTR, LEN_NAME)            sizeof((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
-	        do { break; } while (pci_unmap_len(PTR, LEN_NAME))
-
-#endif
-
 #endif  /* __KERNEL__ */
 
 #ifdef CONFIG_X86_64
 #include "pci_64.h"
 #endif
 
+void dma32_reserve_bootmem(void);
+
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
 
diff --git a/arch/x86/include/asm/pci_64.h b/arch/x86/include/asm/pci_64.h
index ae5e40f..fe15cfb 100644
--- a/arch/x86/include/asm/pci_64.h
+++ b/arch/x86/include/asm/pci_64.h
@@ -22,8 +22,6 @@ extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
 extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
 			       int reg, int len, u32 value);
 
-extern void dma32_reserve_bootmem(void);
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_X86_PCI_64_H */
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b4bf9a9..cd2a31d 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -29,6 +29,7 @@
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
 #define PCI_NOASSIGN_ROMS	0x80000
+#define PCI_ROOT_NO_CRS		0x100000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
@@ -52,6 +53,8 @@ extern int pcibios_last_bus;
 extern struct pci_bus *pci_root_bus;
 extern struct pci_ops pci_root_ops;
 
+void pcibios_scan_specific_bus(int busn);
+
 /* pci-irq.c */
 
 struct irq_info {
@@ -82,8 +85,7 @@ struct irq_routing_table {
 
 extern unsigned int pcibios_irq_mask;
 
-extern int pcibios_scanned;
-extern spinlock_t pci_config_lock;
+extern raw_spinlock_t pci_config_lock;
 
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
@@ -105,16 +107,15 @@ extern bool port_cf9_safe;
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern int pci_olpc_init(void);
 extern void __init dmi_check_pciprobe(void);
 extern void __init dmi_check_skip_isa_align(void);
 
 /* some common used subsys_initcalls */
 extern int __init pci_acpi_init(void);
-extern int __init pcibios_irq_init(void);
-extern int __init pci_visws_init(void);
-extern int __init pci_numaq_init(void);
+extern void __init pcibios_irq_init(void);
 extern int __init pcibios_init(void);
+extern int pci_legacy_init(void);
+extern void pcibios_fixup_irqs(void);
 
 /* pci-mmconfig.c */
 
@@ -182,3 +183,17 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val)
 {
 	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
 }
+
+#ifdef CONFIG_PCI
+# ifdef CONFIG_ACPI
+#  define x86_default_pci_init		pci_acpi_init
+# else
+#  define x86_default_pci_init		pci_legacy_init
+# endif
+# define x86_default_pci_init_irq	pcibios_irq_init
+# define x86_default_pci_fixup_irqs	pcibios_fixup_irqs
+#else
+# define x86_default_pci_init		NULL
+# define x86_default_pci_init_irq	NULL
+# define x86_default_pci_fixup_irqs	NULL
+#endif
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0c44196..cd28f9a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -25,19 +25,18 @@
  */
 #ifdef CONFIG_SMP
 #define PER_CPU(var, reg)						\
-	__percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg;	\
-	lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var)	%__percpu_seg:per_cpu__##var
+	__percpu_mov_op %__percpu_seg:this_cpu_off, reg;		\
+	lea var(reg), reg
+#define PER_CPU_VAR(var)	%__percpu_seg:var
 #else /* ! SMP */
-#define PER_CPU(var, reg)						\
-	__percpu_mov_op $per_cpu__##var, reg
-#define PER_CPU_VAR(var)	per_cpu__##var
+#define PER_CPU(var, reg)	__percpu_mov_op $var, reg
+#define PER_CPU_VAR(var)	var
 #endif	/* SMP */
 
 #ifdef CONFIG_X86_64_SMP
 #define INIT_PER_CPU_VAR(var)  init_per_cpu__##var
 #else
-#define INIT_PER_CPU_VAR(var)  per_cpu__##var
+#define INIT_PER_CPU_VAR(var)  var
 #endif
 
 #else /* ...!ASSEMBLY */
@@ -60,12 +59,12 @@
  * There also must be an entry in vmlinux_64.lds.S
  */
 #define DECLARE_INIT_PER_CPU(var) \
-       extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
+       extern typeof(var) init_per_cpu_var(var)
 
 #ifdef CONFIG_X86_64_SMP
 #define init_per_cpu_var(var)  init_per_cpu__##var
 #else
-#define init_per_cpu_var(var)  per_cpu_var(var)
+#define init_per_cpu_var(var)  var
 #endif
 
 /* For arch-specific code, we can use direct single-insn ops (they
@@ -78,6 +77,7 @@ do {							\
 	if (0) {					\
 		pto_T__ pto_tmp__;			\
 		pto_tmp__ = (val);			\
+		(void)pto_tmp__;			\
 	}						\
 	switch (sizeof(var)) {				\
 	case 1:						\
@@ -104,6 +104,65 @@ do {							\
 	}						\
 } while (0)
 
+/*
+ * Generate a percpu add to memory instruction and optimize code
+ * if one is added or subtracted.
+ */
+#define percpu_add_op(var, val)						\
+do {									\
+	typedef typeof(var) pao_T__;					\
+	const int pao_ID__ = (__builtin_constant_p(val) &&		\
+			      ((val) == 1 || (val) == -1)) ? (val) : 0;	\
+	if (0) {							\
+		pao_T__ pao_tmp__;					\
+		pao_tmp__ = (val);					\
+		(void)pao_tmp__;					\
+	}								\
+	switch (sizeof(var)) {						\
+	case 1:								\
+		if (pao_ID__ == 1)					\
+			asm("incb "__percpu_arg(0) : "+m" (var));	\
+		else if (pao_ID__ == -1)				\
+			asm("decb "__percpu_arg(0) : "+m" (var));	\
+		else							\
+			asm("addb %1, "__percpu_arg(0)			\
+			    : "+m" (var)				\
+			    : "qi" ((pao_T__)(val)));			\
+		break;							\
+	case 2:								\
+		if (pao_ID__ == 1)					\
+			asm("incw "__percpu_arg(0) : "+m" (var));	\
+		else if (pao_ID__ == -1)				\
+			asm("decw "__percpu_arg(0) : "+m" (var));	\
+		else							\
+			asm("addw %1, "__percpu_arg(0)			\
+			    : "+m" (var)				\
+			    : "ri" ((pao_T__)(val)));			\
+		break;							\
+	case 4:								\
+		if (pao_ID__ == 1)					\
+			asm("incl "__percpu_arg(0) : "+m" (var));	\
+		else if (pao_ID__ == -1)				\
+			asm("decl "__percpu_arg(0) : "+m" (var));	\
+		else							\
+			asm("addl %1, "__percpu_arg(0)			\
+			    : "+m" (var)				\
+			    : "ri" ((pao_T__)(val)));			\
+		break;							\
+	case 8:								\
+		if (pao_ID__ == 1)					\
+			asm("incq "__percpu_arg(0) : "+m" (var));	\
+		else if (pao_ID__ == -1)				\
+			asm("decq "__percpu_arg(0) : "+m" (var));	\
+		else							\
+			asm("addq %1, "__percpu_arg(0)			\
+			    : "+m" (var)				\
+			    : "re" ((pao_T__)(val)));			\
+		break;							\
+	default: __bad_percpu_size();					\
+	}								\
+} while (0)
+
 #define percpu_from_op(op, var, constraint)		\
 ({							\
 	typeof(var) pfo_ret__;				\
@@ -133,6 +192,29 @@ do {							\
 	pfo_ret__;					\
 })
 
+#define percpu_unary_op(op, var)			\
+({							\
+	switch (sizeof(var)) {				\
+	case 1:						\
+		asm(op "b "__percpu_arg(0)		\
+		    : "+m" (var));			\
+		break;					\
+	case 2:						\
+		asm(op "w "__percpu_arg(0)		\
+		    : "+m" (var));			\
+		break;					\
+	case 4:						\
+		asm(op "l "__percpu_arg(0)		\
+		    : "+m" (var));			\
+		break;					\
+	case 8:						\
+		asm(op "q "__percpu_arg(0)		\
+		    : "+m" (var));			\
+		break;					\
+	default: __bad_percpu_size();			\
+	}						\
+})
+
 /*
  * percpu_read() makes gcc load the percpu variable every time it is
  * accessed while percpu_read_stable() allows the value to be cached.
@@ -142,16 +224,15 @@ do {							\
  * per-thread variables implemented as per-cpu variables and thus
  * stable for the duration of the respective task.
  */
-#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var,	\
-					       "m" (per_cpu__##var))
-#define percpu_read_stable(var)	percpu_from_op("mov", per_cpu__##var,	\
-					       "p" (&per_cpu__##var))
-#define percpu_write(var, val)	percpu_to_op("mov", per_cpu__##var, val)
-#define percpu_add(var, val)	percpu_to_op("add", per_cpu__##var, val)
-#define percpu_sub(var, val)	percpu_to_op("sub", per_cpu__##var, val)
-#define percpu_and(var, val)	percpu_to_op("and", per_cpu__##var, val)
-#define percpu_or(var, val)	percpu_to_op("or", per_cpu__##var, val)
-#define percpu_xor(var, val)	percpu_to_op("xor", per_cpu__##var, val)
+#define percpu_read(var)		percpu_from_op("mov", var, "m" (var))
+#define percpu_read_stable(var)		percpu_from_op("mov", var, "p" (&(var)))
+#define percpu_write(var, val)		percpu_to_op("mov", var, val)
+#define percpu_add(var, val)		percpu_add_op(var, val)
+#define percpu_sub(var, val)		percpu_add_op(var, -(val))
+#define percpu_and(var, val)		percpu_to_op("and", var, val)
+#define percpu_or(var, val)		percpu_to_op("or", var, val)
+#define percpu_xor(var, val)		percpu_to_op("xor", var, val)
+#define percpu_inc(var)		percpu_unary_op("inc", var)
 
 #define __this_cpu_read_1(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define __this_cpu_read_2(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
@@ -160,9 +241,9 @@ do {							\
 #define __this_cpu_write_1(pcp, val)	percpu_to_op("mov", (pcp), val)
 #define __this_cpu_write_2(pcp, val)	percpu_to_op("mov", (pcp), val)
 #define __this_cpu_write_4(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_add_1(pcp, val)	percpu_to_op("add", (pcp), val)
-#define __this_cpu_add_2(pcp, val)	percpu_to_op("add", (pcp), val)
-#define __this_cpu_add_4(pcp, val)	percpu_to_op("add", (pcp), val)
+#define __this_cpu_add_1(pcp, val)	percpu_add_op((pcp), val)
+#define __this_cpu_add_2(pcp, val)	percpu_add_op((pcp), val)
+#define __this_cpu_add_4(pcp, val)	percpu_add_op((pcp), val)
 #define __this_cpu_and_1(pcp, val)	percpu_to_op("and", (pcp), val)
 #define __this_cpu_and_2(pcp, val)	percpu_to_op("and", (pcp), val)
 #define __this_cpu_and_4(pcp, val)	percpu_to_op("and", (pcp), val)
@@ -179,9 +260,9 @@ do {							\
 #define this_cpu_write_1(pcp, val)	percpu_to_op("mov", (pcp), val)
 #define this_cpu_write_2(pcp, val)	percpu_to_op("mov", (pcp), val)
 #define this_cpu_write_4(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define this_cpu_add_1(pcp, val)	percpu_to_op("add", (pcp), val)
-#define this_cpu_add_2(pcp, val)	percpu_to_op("add", (pcp), val)
-#define this_cpu_add_4(pcp, val)	percpu_to_op("add", (pcp), val)
+#define this_cpu_add_1(pcp, val)	percpu_add_op((pcp), val)
+#define this_cpu_add_2(pcp, val)	percpu_add_op((pcp), val)
+#define this_cpu_add_4(pcp, val)	percpu_add_op((pcp), val)
 #define this_cpu_and_1(pcp, val)	percpu_to_op("and", (pcp), val)
 #define this_cpu_and_2(pcp, val)	percpu_to_op("and", (pcp), val)
 #define this_cpu_and_4(pcp, val)	percpu_to_op("and", (pcp), val)
@@ -192,9 +273,9 @@ do {							\
 #define this_cpu_xor_2(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define this_cpu_xor_4(pcp, val)	percpu_to_op("xor", (pcp), val)
 
-#define irqsafe_cpu_add_1(pcp, val)	percpu_to_op("add", (pcp), val)
-#define irqsafe_cpu_add_2(pcp, val)	percpu_to_op("add", (pcp), val)
-#define irqsafe_cpu_add_4(pcp, val)	percpu_to_op("add", (pcp), val)
+#define irqsafe_cpu_add_1(pcp, val)	percpu_add_op((pcp), val)
+#define irqsafe_cpu_add_2(pcp, val)	percpu_add_op((pcp), val)
+#define irqsafe_cpu_add_4(pcp, val)	percpu_add_op((pcp), val)
 #define irqsafe_cpu_and_1(pcp, val)	percpu_to_op("and", (pcp), val)
 #define irqsafe_cpu_and_2(pcp, val)	percpu_to_op("and", (pcp), val)
 #define irqsafe_cpu_and_4(pcp, val)	percpu_to_op("and", (pcp), val)
@@ -212,19 +293,19 @@ do {							\
 #ifdef CONFIG_X86_64
 #define __this_cpu_read_8(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define __this_cpu_write_8(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_add_8(pcp, val)	percpu_to_op("add", (pcp), val)
+#define __this_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
 #define __this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define __this_cpu_or_8(pcp, val)	percpu_to_op("or", (pcp), val)
 #define __this_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
 
 #define this_cpu_read_8(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define this_cpu_write_8(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define this_cpu_add_8(pcp, val)	percpu_to_op("add", (pcp), val)
+#define this_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
 #define this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define this_cpu_or_8(pcp, val)		percpu_to_op("or", (pcp), val)
 #define this_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
 
-#define irqsafe_cpu_add_8(pcp, val)	percpu_to_op("add", (pcp), val)
+#define irqsafe_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
 #define irqsafe_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define irqsafe_cpu_or_8(pcp, val)	percpu_to_op("or", (pcp), val)
 #define irqsafe_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
@@ -236,7 +317,7 @@ do {							\
 ({									\
 	int old__;							\
 	asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0"		\
-		     : "=r" (old__), "+m" (per_cpu__##var)		\
+		     : "=r" (old__), "+m" (var)				\
 		     : "dIr" (bit));					\
 	old__;								\
 })
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 1380367..254883d 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -5,7 +5,7 @@
  * Performance event hw details:
  */
 
-#define X86_PMC_MAX_GENERIC					8
+#define X86_PMC_MAX_GENERIC				       32
 #define X86_PMC_MAX_FIXED					3
 
 #define X86_PMC_IDX_GENERIC				        0
@@ -18,27 +18,31 @@
 #define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
 #define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
 
-#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
-#define ARCH_PERFMON_EVENTSEL_ANY			  (1 << 21)
-#define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
-#define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
-#define ARCH_PERFMON_EVENTSEL_USR			  (1 << 16)
-
-/*
- * Includes eventsel and unit mask as well:
- */
-#define ARCH_PERFMON_EVENT_MASK				    0xffff
-
-/*
- * filter mask to validate fixed counter events.
- * the following filters disqualify for fixed counters:
- *  - inv
- *  - edge
- *  - cnt-mask
- *  The other filters are supported by fixed counters.
- *  The any-thread option is supported starting with v3.
- */
-#define ARCH_PERFMON_EVENT_FILTER_MASK			0xff840000
+#define ARCH_PERFMON_EVENTSEL_EVENT			0x000000FFULL
+#define ARCH_PERFMON_EVENTSEL_UMASK			0x0000FF00ULL
+#define ARCH_PERFMON_EVENTSEL_USR			(1ULL << 16)
+#define ARCH_PERFMON_EVENTSEL_OS			(1ULL << 17)
+#define ARCH_PERFMON_EVENTSEL_EDGE			(1ULL << 18)
+#define ARCH_PERFMON_EVENTSEL_INT			(1ULL << 20)
+#define ARCH_PERFMON_EVENTSEL_ANY			(1ULL << 21)
+#define ARCH_PERFMON_EVENTSEL_ENABLE			(1ULL << 22)
+#define ARCH_PERFMON_EVENTSEL_INV			(1ULL << 23)
+#define ARCH_PERFMON_EVENTSEL_CMASK			0xFF000000ULL
+
+#define AMD64_EVENTSEL_EVENT	\
+	(ARCH_PERFMON_EVENTSEL_EVENT | (0x0FULL << 32))
+#define INTEL_ARCH_EVENT_MASK	\
+	(ARCH_PERFMON_EVENTSEL_UMASK | ARCH_PERFMON_EVENTSEL_EVENT)
+
+#define X86_RAW_EVENT_MASK		\
+	(ARCH_PERFMON_EVENTSEL_EVENT |	\
+	 ARCH_PERFMON_EVENTSEL_UMASK |	\
+	 ARCH_PERFMON_EVENTSEL_EDGE  |	\
+	 ARCH_PERFMON_EVENTSEL_INV   |	\
+	 ARCH_PERFMON_EVENTSEL_CMASK)
+#define AMD64_RAW_EVENT_MASK		\
+	(X86_RAW_EVENT_MASK          |  \
+	 AMD64_EVENTSEL_EVENT)
 
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
@@ -55,7 +59,7 @@
 union cpuid10_eax {
 	struct {
 		unsigned int version_id:8;
-		unsigned int num_events:8;
+		unsigned int num_counters:8;
 		unsigned int bit_width:8;
 		unsigned int mask_length:8;
 	} split;
@@ -64,7 +68,7 @@ union cpuid10_eax {
 
 union cpuid10_edx {
 	struct {
-		unsigned int num_events_fixed:4;
+		unsigned int num_counters_fixed:4;
 		unsigned int reserved:28;
 	} split;
 	unsigned int full;
@@ -105,6 +109,18 @@ union cpuid10_edx {
  */
 #define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
 
+/* IbsFetchCtl bits/masks */
+#define IBS_FETCH_RAND_EN		(1ULL<<57)
+#define IBS_FETCH_VAL			(1ULL<<49)
+#define IBS_FETCH_ENABLE		(1ULL<<48)
+#define IBS_FETCH_CNT			0xFFFF0000ULL
+#define IBS_FETCH_MAX_CNT		0x0000FFFFULL
+
+/* IbsOpCtl bits */
+#define IBS_OP_CNT_CTL			(1ULL<<19)
+#define IBS_OP_VAL			(1ULL<<18)
+#define IBS_OP_ENABLE			(1ULL<<17)
+#define IBS_OP_MAX_CNT			0x0000FFFFULL
 
 #ifdef CONFIG_PERF_EVENTS
 extern void init_hw_perf_events(void);
@@ -112,6 +128,18 @@ extern void perf_events_lapic_init(void);
 
 #define PERF_EVENT_INDEX_OFFSET			0
 
+/*
+ * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups.
+ * This flag is otherwise unused and ABI specified to be 0, so nobody should
+ * care what we do with it.
+ */
+#define PERF_EFLAGS_EXACT	(1UL << 3)
+
+struct pt_regs;
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+
 #else
 static inline void init_hw_perf_events(void)		{ }
 static inline void perf_events_lapic_init(void)	{ }
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
new file mode 100644
index 0000000..64a8ebf
--- /dev/null
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -0,0 +1,795 @@
+/*
+ * Netburst Perfomance Events (P4, old Xeon)
+ */
+
+#ifndef PERF_EVENT_P4_H
+#define PERF_EVENT_P4_H
+
+#include <linux/cpu.h>
+#include <linux/bitops.h>
+
+/*
+ * NetBurst has perfomance MSRs shared between
+ * threads if HT is turned on, ie for both logical
+ * processors (mem: in turn in Atom with HT support
+ * perf-MSRs are not shared and every thread has its
+ * own perf-MSRs set)
+ */
+#define ARCH_P4_TOTAL_ESCR	(46)
+#define ARCH_P4_RESERVED_ESCR	(2) /* IQ_ESCR(0,1) not always present */
+#define ARCH_P4_MAX_ESCR	(ARCH_P4_TOTAL_ESCR - ARCH_P4_RESERVED_ESCR)
+#define ARCH_P4_MAX_CCCR	(18)
+#define ARCH_P4_MAX_COUNTER	(ARCH_P4_MAX_CCCR / 2)
+
+#define P4_ESCR_EVENT_MASK	0x7e000000U
+#define P4_ESCR_EVENT_SHIFT	25
+#define P4_ESCR_EVENTMASK_MASK	0x01fffe00U
+#define P4_ESCR_EVENTMASK_SHIFT	9
+#define P4_ESCR_TAG_MASK	0x000001e0U
+#define P4_ESCR_TAG_SHIFT	5
+#define P4_ESCR_TAG_ENABLE	0x00000010U
+#define P4_ESCR_T0_OS		0x00000008U
+#define P4_ESCR_T0_USR		0x00000004U
+#define P4_ESCR_T1_OS		0x00000002U
+#define P4_ESCR_T1_USR		0x00000001U
+
+#define P4_ESCR_EVENT(v)	((v) << P4_ESCR_EVENT_SHIFT)
+#define P4_ESCR_EMASK(v)	((v) << P4_ESCR_EVENTMASK_SHIFT)
+#define P4_ESCR_TAG(v)		((v) << P4_ESCR_TAG_SHIFT)
+
+/* Non HT mask */
+#define P4_ESCR_MASK			\
+	(P4_ESCR_EVENT_MASK	|	\
+	P4_ESCR_EVENTMASK_MASK	|	\
+	P4_ESCR_TAG_MASK	|	\
+	P4_ESCR_TAG_ENABLE	|	\
+	P4_ESCR_T0_OS		|	\
+	P4_ESCR_T0_USR)
+
+/* HT mask */
+#define P4_ESCR_MASK_HT			\
+	(P4_ESCR_MASK |	P4_ESCR_T1_OS | P4_ESCR_T1_USR)
+
+#define P4_CCCR_OVF			0x80000000U
+#define P4_CCCR_CASCADE			0x40000000U
+#define P4_CCCR_OVF_PMI_T0		0x04000000U
+#define P4_CCCR_OVF_PMI_T1		0x08000000U
+#define P4_CCCR_FORCE_OVF		0x02000000U
+#define P4_CCCR_EDGE			0x01000000U
+#define P4_CCCR_THRESHOLD_MASK		0x00f00000U
+#define P4_CCCR_THRESHOLD_SHIFT		20
+#define P4_CCCR_COMPLEMENT		0x00080000U
+#define P4_CCCR_COMPARE			0x00040000U
+#define P4_CCCR_ESCR_SELECT_MASK	0x0000e000U
+#define P4_CCCR_ESCR_SELECT_SHIFT	13
+#define P4_CCCR_ENABLE			0x00001000U
+#define P4_CCCR_THREAD_SINGLE		0x00010000U
+#define P4_CCCR_THREAD_BOTH		0x00020000U
+#define P4_CCCR_THREAD_ANY		0x00030000U
+#define P4_CCCR_RESERVED		0x00000fffU
+
+#define P4_CCCR_THRESHOLD(v)		((v) << P4_CCCR_THRESHOLD_SHIFT)
+#define P4_CCCR_ESEL(v)			((v) << P4_CCCR_ESCR_SELECT_SHIFT)
+
+/* Custom bits in reerved CCCR area */
+#define P4_CCCR_CACHE_OPS_MASK		0x0000003fU
+
+
+/* Non HT mask */
+#define P4_CCCR_MASK				\
+	(P4_CCCR_OVF			|	\
+	P4_CCCR_CASCADE			|	\
+	P4_CCCR_OVF_PMI_T0		|	\
+	P4_CCCR_FORCE_OVF		|	\
+	P4_CCCR_EDGE			|	\
+	P4_CCCR_THRESHOLD_MASK		|	\
+	P4_CCCR_COMPLEMENT		|	\
+	P4_CCCR_COMPARE			|	\
+	P4_CCCR_ESCR_SELECT_MASK	|	\
+	P4_CCCR_ENABLE)
+
+/* HT mask */
+#define P4_CCCR_MASK_HT				\
+	(P4_CCCR_MASK | P4_CCCR_OVF_PMI_T1 | P4_CCCR_THREAD_ANY)
+
+#define P4_GEN_ESCR_EMASK(class, name, bit)	\
+	class##__##name = ((1 << bit) << P4_ESCR_EVENTMASK_SHIFT)
+#define P4_ESCR_EMASK_BIT(class, name)		class##__##name
+
+/*
+ * config field is 64bit width and consists of
+ * HT << 63 | ESCR << 32 | CCCR
+ * where HT is HyperThreading bit (since ESCR
+ * has it reserved we may use it for own purpose)
+ *
+ * note that this is NOT the addresses of respective
+ * ESCR and CCCR but rather an only packed value should
+ * be unpacked and written to a proper addresses
+ *
+ * the base idea is to pack as much info as
+ * possible
+ */
+#define p4_config_pack_escr(v)		(((u64)(v)) << 32)
+#define p4_config_pack_cccr(v)		(((u64)(v)) & 0xffffffffULL)
+#define p4_config_unpack_escr(v)	(((u64)(v)) >> 32)
+#define p4_config_unpack_cccr(v)	(((u64)(v)) & 0xffffffffULL)
+
+#define p4_config_unpack_emask(v)			\
+	({						\
+		u32 t = p4_config_unpack_escr((v));	\
+		t = t &  P4_ESCR_EVENTMASK_MASK;	\
+		t = t >> P4_ESCR_EVENTMASK_SHIFT;	\
+		t;					\
+	})
+
+#define p4_config_unpack_event(v)			\
+	({						\
+		u32 t = p4_config_unpack_escr((v));	\
+		t = t &  P4_ESCR_EVENT_MASK;		\
+		t = t >> P4_ESCR_EVENT_SHIFT;		\
+		t;					\
+	})
+
+#define p4_config_unpack_cache_event(v)	(((u64)(v)) & P4_CCCR_CACHE_OPS_MASK)
+
+#define P4_CONFIG_HT_SHIFT		63
+#define P4_CONFIG_HT			(1ULL << P4_CONFIG_HT_SHIFT)
+
+static inline bool p4_is_event_cascaded(u64 config)
+{
+	u32 cccr = p4_config_unpack_cccr(config);
+	return !!(cccr & P4_CCCR_CASCADE);
+}
+
+static inline int p4_ht_config_thread(u64 config)
+{
+	return !!(config & P4_CONFIG_HT);
+}
+
+static inline u64 p4_set_ht_bit(u64 config)
+{
+	return config | P4_CONFIG_HT;
+}
+
+static inline u64 p4_clear_ht_bit(u64 config)
+{
+	return config & ~P4_CONFIG_HT;
+}
+
+static inline int p4_ht_active(void)
+{
+#ifdef CONFIG_SMP
+	return smp_num_siblings > 1;
+#endif
+	return 0;
+}
+
+static inline int p4_ht_thread(int cpu)
+{
+#ifdef CONFIG_SMP
+	if (smp_num_siblings == 2)
+		return cpu != cpumask_first(__get_cpu_var(cpu_sibling_map));
+#endif
+	return 0;
+}
+
+static inline int p4_should_swap_ts(u64 config, int cpu)
+{
+	return p4_ht_config_thread(config) ^ p4_ht_thread(cpu);
+}
+
+static inline u32 p4_default_cccr_conf(int cpu)
+{
+	/*
+	 * Note that P4_CCCR_THREAD_ANY is "required" on
+	 * non-HT machines (on HT machines we count TS events
+	 * regardless the state of second logical processor
+	 */
+	u32 cccr = P4_CCCR_THREAD_ANY;
+
+	if (!p4_ht_thread(cpu))
+		cccr |= P4_CCCR_OVF_PMI_T0;
+	else
+		cccr |= P4_CCCR_OVF_PMI_T1;
+
+	return cccr;
+}
+
+static inline u32 p4_default_escr_conf(int cpu, int exclude_os, int exclude_usr)
+{
+	u32 escr = 0;
+
+	if (!p4_ht_thread(cpu)) {
+		if (!exclude_os)
+			escr |= P4_ESCR_T0_OS;
+		if (!exclude_usr)
+			escr |= P4_ESCR_T0_USR;
+	} else {
+		if (!exclude_os)
+			escr |= P4_ESCR_T1_OS;
+		if (!exclude_usr)
+			escr |= P4_ESCR_T1_USR;
+	}
+
+	return escr;
+}
+
+enum P4_EVENTS {
+	P4_EVENT_TC_DELIVER_MODE,
+	P4_EVENT_BPU_FETCH_REQUEST,
+	P4_EVENT_ITLB_REFERENCE,
+	P4_EVENT_MEMORY_CANCEL,
+	P4_EVENT_MEMORY_COMPLETE,
+	P4_EVENT_LOAD_PORT_REPLAY,
+	P4_EVENT_STORE_PORT_REPLAY,
+	P4_EVENT_MOB_LOAD_REPLAY,
+	P4_EVENT_PAGE_WALK_TYPE,
+	P4_EVENT_BSQ_CACHE_REFERENCE,
+	P4_EVENT_IOQ_ALLOCATION,
+	P4_EVENT_IOQ_ACTIVE_ENTRIES,
+	P4_EVENT_FSB_DATA_ACTIVITY,
+	P4_EVENT_BSQ_ALLOCATION,
+	P4_EVENT_BSQ_ACTIVE_ENTRIES,
+	P4_EVENT_SSE_INPUT_ASSIST,
+	P4_EVENT_PACKED_SP_UOP,
+	P4_EVENT_PACKED_DP_UOP,
+	P4_EVENT_SCALAR_SP_UOP,
+	P4_EVENT_SCALAR_DP_UOP,
+	P4_EVENT_64BIT_MMX_UOP,
+	P4_EVENT_128BIT_MMX_UOP,
+	P4_EVENT_X87_FP_UOP,
+	P4_EVENT_TC_MISC,
+	P4_EVENT_GLOBAL_POWER_EVENTS,
+	P4_EVENT_TC_MS_XFER,
+	P4_EVENT_UOP_QUEUE_WRITES,
+	P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE,
+	P4_EVENT_RETIRED_BRANCH_TYPE,
+	P4_EVENT_RESOURCE_STALL,
+	P4_EVENT_WC_BUFFER,
+	P4_EVENT_B2B_CYCLES,
+	P4_EVENT_BNR,
+	P4_EVENT_SNOOP,
+	P4_EVENT_RESPONSE,
+	P4_EVENT_FRONT_END_EVENT,
+	P4_EVENT_EXECUTION_EVENT,
+	P4_EVENT_REPLAY_EVENT,
+	P4_EVENT_INSTR_RETIRED,
+	P4_EVENT_UOPS_RETIRED,
+	P4_EVENT_UOP_TYPE,
+	P4_EVENT_BRANCH_RETIRED,
+	P4_EVENT_MISPRED_BRANCH_RETIRED,
+	P4_EVENT_X87_ASSIST,
+	P4_EVENT_MACHINE_CLEAR,
+	P4_EVENT_INSTR_COMPLETED,
+};
+
+#define P4_OPCODE(event)		event##_OPCODE
+#define P4_OPCODE_ESEL(opcode)		((opcode & 0x00ff) >> 0)
+#define P4_OPCODE_EVNT(opcode)		((opcode & 0xff00) >> 8)
+#define P4_OPCODE_PACK(event, sel)	(((event) << 8) | sel)
+
+/*
+ * Comments below the event represent ESCR restriction
+ * for this event and counter index per ESCR
+ *
+ * MSR_P4_IQ_ESCR0 and MSR_P4_IQ_ESCR1 are available only on early
+ * processor builds (family 0FH, models 01H-02H). These MSRs
+ * are not available on later versions, so that we don't use
+ * them completely
+ *
+ * Also note that CCCR1 do not have P4_CCCR_ENABLE bit properly
+ * working so that we should not use this CCCR and respective
+ * counter as result
+ */
+enum P4_EVENT_OPCODES {
+	P4_OPCODE(P4_EVENT_TC_DELIVER_MODE)		= P4_OPCODE_PACK(0x01, 0x01),
+	/*
+	 * MSR_P4_TC_ESCR0:	4, 5
+	 * MSR_P4_TC_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_BPU_FETCH_REQUEST)		= P4_OPCODE_PACK(0x03, 0x00),
+	/*
+	 * MSR_P4_BPU_ESCR0:	0, 1
+	 * MSR_P4_BPU_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_ITLB_REFERENCE)		= P4_OPCODE_PACK(0x18, 0x03),
+	/*
+	 * MSR_P4_ITLB_ESCR0:	0, 1
+	 * MSR_P4_ITLB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_MEMORY_CANCEL)		= P4_OPCODE_PACK(0x02, 0x05),
+	/*
+	 * MSR_P4_DAC_ESCR0:	8, 9
+	 * MSR_P4_DAC_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_MEMORY_COMPLETE)		= P4_OPCODE_PACK(0x08, 0x02),
+	/*
+	 * MSR_P4_SAAT_ESCR0:	8, 9
+	 * MSR_P4_SAAT_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_LOAD_PORT_REPLAY)		= P4_OPCODE_PACK(0x04, 0x02),
+	/*
+	 * MSR_P4_SAAT_ESCR0:	8, 9
+	 * MSR_P4_SAAT_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_STORE_PORT_REPLAY)		= P4_OPCODE_PACK(0x05, 0x02),
+	/*
+	 * MSR_P4_SAAT_ESCR0:	8, 9
+	 * MSR_P4_SAAT_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_MOB_LOAD_REPLAY)		= P4_OPCODE_PACK(0x03, 0x02),
+	/*
+	 * MSR_P4_MOB_ESCR0:	0, 1
+	 * MSR_P4_MOB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_PAGE_WALK_TYPE)		= P4_OPCODE_PACK(0x01, 0x04),
+	/*
+	 * MSR_P4_PMH_ESCR0:	0, 1
+	 * MSR_P4_PMH_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_BSQ_CACHE_REFERENCE)		= P4_OPCODE_PACK(0x0c, 0x07),
+	/*
+	 * MSR_P4_BSU_ESCR0:	0, 1
+	 * MSR_P4_BSU_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_IOQ_ALLOCATION)		= P4_OPCODE_PACK(0x03, 0x06),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_IOQ_ACTIVE_ENTRIES)		= P4_OPCODE_PACK(0x1a, 0x06),
+	/*
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_FSB_DATA_ACTIVITY)		= P4_OPCODE_PACK(0x17, 0x06),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_BSQ_ALLOCATION)		= P4_OPCODE_PACK(0x05, 0x07),
+	/*
+	 * MSR_P4_BSU_ESCR0:	0, 1
+	 */
+
+	P4_OPCODE(P4_EVENT_BSQ_ACTIVE_ENTRIES)		= P4_OPCODE_PACK(0x06, 0x07),
+	/*
+	 * NOTE: no ESCR name in docs, it's guessed
+	 * MSR_P4_BSU_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_SSE_INPUT_ASSIST)		= P4_OPCODE_PACK(0x34, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_PACKED_SP_UOP)		= P4_OPCODE_PACK(0x08, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_PACKED_DP_UOP)		= P4_OPCODE_PACK(0x0c, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_SCALAR_SP_UOP)		= P4_OPCODE_PACK(0x0a, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_SCALAR_DP_UOP)		= P4_OPCODE_PACK(0x0e, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_64BIT_MMX_UOP)		= P4_OPCODE_PACK(0x02, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_128BIT_MMX_UOP)		= P4_OPCODE_PACK(0x1a, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_X87_FP_UOP)			= P4_OPCODE_PACK(0x04, 0x01),
+	/*
+	 * MSR_P4_FIRM_ESCR0:	8, 9
+	 * MSR_P4_FIRM_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_TC_MISC)			= P4_OPCODE_PACK(0x06, 0x01),
+	/*
+	 * MSR_P4_TC_ESCR0:	4, 5
+	 * MSR_P4_TC_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_GLOBAL_POWER_EVENTS)		= P4_OPCODE_PACK(0x13, 0x06),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_TC_MS_XFER)			= P4_OPCODE_PACK(0x05, 0x00),
+	/*
+	 * MSR_P4_MS_ESCR0:	4, 5
+	 * MSR_P4_MS_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_UOP_QUEUE_WRITES)		= P4_OPCODE_PACK(0x09, 0x00),
+	/*
+	 * MSR_P4_MS_ESCR0:	4, 5
+	 * MSR_P4_MS_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE)	= P4_OPCODE_PACK(0x05, 0x02),
+	/*
+	 * MSR_P4_TBPU_ESCR0:	4, 5
+	 * MSR_P4_TBPU_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_RETIRED_BRANCH_TYPE)		= P4_OPCODE_PACK(0x04, 0x02),
+	/*
+	 * MSR_P4_TBPU_ESCR0:	4, 5
+	 * MSR_P4_TBPU_ESCR1:	6, 7
+	 */
+
+	P4_OPCODE(P4_EVENT_RESOURCE_STALL)		= P4_OPCODE_PACK(0x01, 0x01),
+	/*
+	 * MSR_P4_ALF_ESCR0:	12, 13, 16
+	 * MSR_P4_ALF_ESCR1:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_WC_BUFFER)			= P4_OPCODE_PACK(0x05, 0x05),
+	/*
+	 * MSR_P4_DAC_ESCR0:	8, 9
+	 * MSR_P4_DAC_ESCR1:	10, 11
+	 */
+
+	P4_OPCODE(P4_EVENT_B2B_CYCLES)			= P4_OPCODE_PACK(0x16, 0x03),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_BNR)				= P4_OPCODE_PACK(0x08, 0x03),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_SNOOP)			= P4_OPCODE_PACK(0x06, 0x03),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_RESPONSE)			= P4_OPCODE_PACK(0x04, 0x03),
+	/*
+	 * MSR_P4_FSB_ESCR0:	0, 1
+	 * MSR_P4_FSB_ESCR1:	2, 3
+	 */
+
+	P4_OPCODE(P4_EVENT_FRONT_END_EVENT)		= P4_OPCODE_PACK(0x08, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_EXECUTION_EVENT)		= P4_OPCODE_PACK(0x0c, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_REPLAY_EVENT)		= P4_OPCODE_PACK(0x09, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_INSTR_RETIRED)		= P4_OPCODE_PACK(0x02, 0x04),
+	/*
+	 * MSR_P4_CRU_ESCR0:	12, 13, 16
+	 * MSR_P4_CRU_ESCR1:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_UOPS_RETIRED)		= P4_OPCODE_PACK(0x01, 0x04),
+	/*
+	 * MSR_P4_CRU_ESCR0:	12, 13, 16
+	 * MSR_P4_CRU_ESCR1:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_UOP_TYPE)			= P4_OPCODE_PACK(0x02, 0x02),
+	/*
+	 * MSR_P4_RAT_ESCR0:	12, 13, 16
+	 * MSR_P4_RAT_ESCR1:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_BRANCH_RETIRED)		= P4_OPCODE_PACK(0x06, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED)	= P4_OPCODE_PACK(0x03, 0x04),
+	/*
+	 * MSR_P4_CRU_ESCR0:	12, 13, 16
+	 * MSR_P4_CRU_ESCR1:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_X87_ASSIST)			= P4_OPCODE_PACK(0x03, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_MACHINE_CLEAR)		= P4_OPCODE_PACK(0x02, 0x05),
+	/*
+	 * MSR_P4_CRU_ESCR2:	12, 13, 16
+	 * MSR_P4_CRU_ESCR3:	14, 15, 17
+	 */
+
+	P4_OPCODE(P4_EVENT_INSTR_COMPLETED)		= P4_OPCODE_PACK(0x07, 0x04),
+	/*
+	 * MSR_P4_CRU_ESCR0:	12, 13, 16
+	 * MSR_P4_CRU_ESCR1:	14, 15, 17
+	 */
+};
+
+/*
+ * a caller should use P4_ESCR_EMASK_NAME helper to
+ * pick the EventMask needed, for example
+ *
+ *	P4_ESCR_EMASK_NAME(P4_EVENT_TC_DELIVER_MODE, DD)
+ */
+enum P4_ESCR_EMASKS {
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DD, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DB, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DI, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BD, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BB, 4),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BI, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, ID, 6),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_BPU_FETCH_REQUEST, TCMISS, 0),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, HIT, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, MISS, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, HIT_UK, 2),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_CANCEL, ST_RB_FULL, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_CANCEL, 64K_CONF, 3),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_COMPLETE, LSC, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_COMPLETE, SSC, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_LOAD_PORT_REPLAY, SPLIT_LD, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_STORE_PORT_REPLAY, SPLIT_ST, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, NO_STA, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, NO_STD, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, PARTIAL_DATA, 4),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, UNALGN_ADDR, 5),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_PAGE_WALK_TYPE, DTMISS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_PAGE_WALK_TYPE, ITMISS, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITE, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITM, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITS, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITE, 4),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITM, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_MISS, 8),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_MISS, 9),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, WR_2ndL_MISS, 10),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, DEFAULT, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, ALL_READ, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, ALL_WRITE, 6),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_UC, 7),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WC, 8),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WT, 9),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WP, 10),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WB, 11),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, OWN, 13),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, OTHER, 14),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, PREFETCH, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, DEFAULT, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, ALL_READ, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, ALL_WRITE, 6),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_UC, 7),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WC, 8),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WT, 9),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WP, 10),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WB, 11),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, OWN, 13),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, OTHER, 14),
+	P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, PREFETCH, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_DRV, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_OWN, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_OTHER, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_DRV, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_OWN, 4),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_OTHER, 5),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_TYPE0, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_TYPE1, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LEN0, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LEN1, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_IO_TYPE, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LOCK_TYPE, 6),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_CACHE_TYPE, 7),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_SPLIT_TYPE, 8),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_DEM_TYPE, 9),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_ORD_TYPE, 10),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE0, 11),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE1, 12),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE2, 13),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_TYPE0, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_TYPE1, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LEN0, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LEN1, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_IO_TYPE, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LOCK_TYPE, 6),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_CACHE_TYPE, 7),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_SPLIT_TYPE, 8),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_DEM_TYPE, 9),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_ORD_TYPE, 10),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE0, 11),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE1, 12),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE2, 13),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_SSE_INPUT_ASSIST, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_PACKED_SP_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_PACKED_DP_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_SCALAR_SP_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_SCALAR_DP_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_64BIT_MMX_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_128BIT_MMX_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_FP_UOP, ALL, 15),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_MISC, FLUSH, 4),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_GLOBAL_POWER_EVENTS, RUNNING, 0),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_TC_MS_XFER, CISC, 0),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_TC_BUILD, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_TC_DELIVER, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_ROM, 2),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, CONDITIONAL, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, CALL, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, RETURN, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, INDIRECT, 4),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, CONDITIONAL, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, CALL, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, RETURN, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, INDIRECT, 4),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_RESOURCE_STALL, SBFULL, 5),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_WC_BUFFER, WCB_EVICTS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_WC_BUFFER, WCB_FULL_EVICTS, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_FRONT_END_EVENT, NBOGUS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_FRONT_END_EVENT, BOGUS, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS0, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS1, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS2, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS3, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS0, 4),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS1, 5),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS2, 6),
+	P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS3, 7),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_REPLAY_EVENT, NBOGUS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_REPLAY_EVENT, BOGUS, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, NBOGUSNTAG, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, NBOGUSTAG, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, BOGUSNTAG, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, BOGUSTAG, 3),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOPS_RETIRED, NBOGUS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOPS_RETIRED, BOGUS, 1),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOP_TYPE, TAGLOADS, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_UOP_TYPE, TAGSTORES, 2),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMNP, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMNM, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMTP, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMTM, 3),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS, 0),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, FPSU, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, FPSO, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, POAO, 2),
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, POAU, 3),
+	P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, PREA, 4),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, CLEAR, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, MOCLEAR, 1),
+	P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, SMCLEAR, 2),
+
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, NBOGUS, 0),
+	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, BOGUS, 1),
+};
+
+/* P4 PEBS: stale for a while */
+#define P4_PEBS_METRIC_MASK	0x00001fffU
+#define P4_PEBS_UOB_TAG		0x01000000U
+#define P4_PEBS_ENABLE		0x02000000U
+
+/* Replay metrics for MSR_IA32_PEBS_ENABLE and MSR_P4_PEBS_MATRIX_VERT */
+#define P4_PEBS__1stl_cache_load_miss_retired	0x3000001
+#define P4_PEBS__2ndl_cache_load_miss_retired	0x3000002
+#define P4_PEBS__dtlb_load_miss_retired		0x3000004
+#define P4_PEBS__dtlb_store_miss_retired	0x3000004
+#define P4_PEBS__dtlb_all_miss_retired		0x3000004
+#define P4_PEBS__tagged_mispred_branch		0x3018000
+#define P4_PEBS__mob_load_replay_retired	0x3000200
+#define P4_PEBS__split_load_retired		0x3000400
+#define P4_PEBS__split_store_retired		0x3000400
+
+#define P4_VERT__1stl_cache_load_miss_retired	0x0000001
+#define P4_VERT__2ndl_cache_load_miss_retired	0x0000001
+#define P4_VERT__dtlb_load_miss_retired		0x0000001
+#define P4_VERT__dtlb_store_miss_retired	0x0000002
+#define P4_VERT__dtlb_all_miss_retired		0x0000003
+#define P4_VERT__tagged_mispred_branch		0x0000010
+#define P4_VERT__mob_load_replay_retired	0x0000001
+#define P4_VERT__split_load_retired		0x0000001
+#define P4_VERT__split_store_retired		0x0000002
+
+enum P4_CACHE_EVENTS {
+	P4_CACHE__NONE,
+
+	P4_CACHE__1stl_cache_load_miss_retired,
+	P4_CACHE__2ndl_cache_load_miss_retired,
+	P4_CACHE__dtlb_load_miss_retired,
+	P4_CACHE__dtlb_store_miss_retired,
+	P4_CACHE__itlb_reference_hit,
+	P4_CACHE__itlb_reference_miss,
+
+	P4_CACHE__MAX
+};
+
+#endif /* PERF_EVENT_P4_H */
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 0e8c2a0..271de94 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -23,6 +23,11 @@ static inline void paravirt_release_pud(unsigned long pfn) {}
 #endif
 
 /*
+ * Flags to use when allocating a user page table page.
+ */
+extern gfp_t __userpte_alloc_gfp;
+
+/*
  * Allocate and free page tables.
  */
 extern pgd_t *pgd_alloc(struct mm_struct *);
diff --git a/arch/x86/include/asm/pgtable_32.h b/arch/x86/include/asm/pgtable_32.h
index 01fd946..2984a25 100644
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -19,7 +19,6 @@
 #include <asm/paravirt.h>
 
 #include <linux/bitops.h>
-#include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
@@ -54,10 +53,10 @@ extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
 	 in_irq() ? KM_IRQ_PTE :	\
 	 KM_PTE0)
 #define pte_offset_map(dir, address)					\
-	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), __KM_PTE) +		\
+	((pte_t *)kmap_atomic(pmd_page(*(dir)), __KM_PTE) +		\
 	 pte_index((address)))
 #define pte_offset_map_nested(dir, address)				\
-	((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) +		\
+	((pte_t *)kmap_atomic(pmd_page(*(dir)), KM_PTE1) +		\
 	 pte_index((address)))
 #define pte_unmap(pte) kunmap_atomic((pte), __KM_PTE)
 #define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
@@ -80,7 +79,7 @@ do {						\
  * The i386 doesn't have any external MMU info: the kernel page
  * tables contain all the necessary information.
  */
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 5e67c15..ed5903b 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -26,7 +26,7 @@
  */
 #define VMALLOC_OFFSET	(8 * 1024 * 1024)
 
-#ifndef __ASSEMBLER__
+#ifndef __ASSEMBLY__
 extern bool __vmalloc_start_set; /* set once high_memory is set */
 #endif
 
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c57a301..181be52 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -129,7 +129,7 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 #define pte_unmap(pte) /* NOP */
 #define pte_unmap_nested(pte) /* NOP */
 
-#define update_mmu_cache(vma, address, pte) do { } while (0)
+#define update_mmu_cache(vma, address, ptep) do { } while (0)
 
 /* Encode and de-code a swap entry */
 #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fc801ba..7e5c6a6 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -21,7 +21,6 @@ struct mm_struct;
 #include <asm/msr.h>
 #include <asm/desc_defs.h>
 #include <asm/nops.h>
-#include <asm/ds.h>
 
 #include <linux/personality.h>
 #include <linux/cpumask.h>
@@ -29,6 +28,7 @@ struct mm_struct;
 #include <linux/threads.h>
 #include <linux/math64.h>
 #include <linux/init.h>
+#include <linux/err.h>
 
 #define HBP_NUM 4
 /*
@@ -113,7 +113,6 @@ struct cpuinfo_x86 {
 	/* Index into per_cpu list: */
 	u16			cpu_index;
 #endif
-	unsigned int		x86_hyper_vendor;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
 #define X86_VENDOR_INTEL	0
@@ -127,9 +126,6 @@ struct cpuinfo_x86 {
 
 #define X86_VENDOR_UNKNOWN	0xff
 
-#define X86_HYPER_VENDOR_NONE  0
-#define X86_HYPER_VENDOR_VMWARE 1
-
 /*
  * capabilities of CPUs
  */
@@ -380,6 +376,10 @@ union thread_xstate {
 	struct xsave_struct		xsave;
 };
 
+struct fpu {
+	union thread_xstate *state;
+};
+
 #ifdef CONFIG_X86_64
 DECLARE_PER_CPU(struct orig_ist, orig_ist);
 
@@ -450,12 +450,14 @@ struct thread_struct {
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
 	unsigned long           debugreg6;
+	/* Keep track of the exact dr7 value set by the user */
+	unsigned long           ptrace_dr7;
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
 	unsigned long		error_code;
 	/* floating point and extended processor state */
-	union thread_xstate	*xstate;
+	struct fpu		fpu;
 #ifdef CONFIG_X86_32
 	/* Virtual 86 mode info */
 	struct vm86_struct __user *vm86_info;
@@ -471,10 +473,6 @@ struct thread_struct {
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
-/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set.  */
-	unsigned long	debugctlmsr;
-	/* Debug Store context; see asm/ds.h */
-	struct ds_context	*ds_ctx;
 };
 
 static inline unsigned long native_get_debugreg(int regno)
@@ -791,6 +789,8 @@ static inline void wbinvd_halt(void)
 extern void enable_sep_cpu(void);
 extern int sysenter_setup(void);
 
+extern void early_trap_init(void);
+
 /* Defined in head.S */
 extern struct desc_ptr		early_gdt_descr;
 
@@ -801,7 +801,7 @@ extern void cpu_init(void);
 
 static inline unsigned long get_debugctlmsr(void)
 {
-    unsigned long debugctlmsr = 0;
+	unsigned long debugctlmsr = 0;
 
 #ifndef CONFIG_X86_DEBUGCTLMSR
 	if (boot_cpu_data.x86 < 6)
@@ -809,21 +809,6 @@ static inline unsigned long get_debugctlmsr(void)
 #endif
 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
 
-    return debugctlmsr;
-}
-
-static inline unsigned long get_debugctlmsr_on_cpu(int cpu)
-{
-	u64 debugctlmsr = 0;
-	u32 val1, val2;
-
-#ifndef CONFIG_X86_DEBUGCTLMSR
-	if (boot_cpu_data.x86 < 6)
-		return 0;
-#endif
-	rdmsr_on_cpu(cpu, MSR_IA32_DEBUGCTLMSR, &val1, &val2);
-	debugctlmsr = val1 | ((u64)val2 << 32);
-
 	return debugctlmsr;
 }
 
@@ -836,18 +821,6 @@ static inline void update_debugctlmsr(unsigned long debugctlmsr)
 	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
 }
 
-static inline void update_debugctlmsr_on_cpu(int cpu,
-					     unsigned long debugctlmsr)
-{
-#ifndef CONFIG_X86_DEBUGCTLMSR
-	if (boot_cpu_data.x86 < 6)
-		return;
-#endif
-	wrmsr_on_cpu(cpu, MSR_IA32_DEBUGCTLMSR,
-		     (u32)((u64)debugctlmsr),
-		     (u32)((u64)debugctlmsr >> 32));
-}
-
 /*
  * from system description table in BIOS. Mostly for MCA use, but
  * others may find it useful:
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 4009f65..6f414ed 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -23,14 +23,4 @@ extern int reboot_force;
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
-/*
- * This looks more complex than it should be. But we need to
- * get the type for the ~ right in round_down (it needs to be
- * as wide as the result!), and we want to evaluate the macro
- * arguments just once each.
- */
-#define __round_mask(x,y) ((__typeof__(x))((y)-1))
-#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
-#define round_down(x,y) ((x) & ~__round_mask(x,y))
-
 #endif /* _ASM_X86_PROTO_H */
diff --git a/arch/x86/include/asm/ptrace-abi.h b/arch/x86/include/asm/ptrace-abi.h
index 8672303..52b098a 100644
--- a/arch/x86/include/asm/ptrace-abi.h
+++ b/arch/x86/include/asm/ptrace-abi.h
@@ -82,61 +82,6 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
-
-/* configuration/status structure used in PTRACE_BTS_CONFIG and
-   PTRACE_BTS_STATUS commands.
-*/
-struct ptrace_bts_config {
-	/* requested or actual size of BTS buffer in bytes */
-	__u32 size;
-	/* bitmask of below flags */
-	__u32 flags;
-	/* buffer overflow signal */
-	__u32 signal;
-	/* actual size of bts_struct in bytes */
-	__u32 bts_size;
-};
-#endif /* __ASSEMBLY__ */
-
-#define PTRACE_BTS_O_TRACE	0x1 /* branch trace */
-#define PTRACE_BTS_O_SCHED	0x2 /* scheduling events w/ jiffies */
-#define PTRACE_BTS_O_SIGNAL     0x4 /* send SIG<signal> on buffer overflow
-				       instead of wrapping around */
-#define PTRACE_BTS_O_ALLOC	0x8 /* (re)allocate buffer */
-
-#define PTRACE_BTS_CONFIG	40
-/* Configure branch trace recording.
-   ADDR points to a struct ptrace_bts_config.
-   DATA gives the size of that buffer.
-   A new buffer is allocated, if requested in the flags.
-   An overflow signal may only be requested for new buffers.
-   Returns the number of bytes read.
-*/
-#define PTRACE_BTS_STATUS	41
-/* Return the current configuration in a struct ptrace_bts_config
-   pointed to by ADDR; DATA gives the size of that buffer.
-   Returns the number of bytes written.
-*/
-#define PTRACE_BTS_SIZE		42
-/* Return the number of available BTS records for draining.
-   DATA and ADDR are ignored.
-*/
-#define PTRACE_BTS_GET		43
-/* Get a single BTS record.
-   DATA defines the index into the BTS array, where 0 is the newest
-   entry, and higher indices refer to older entries.
-   ADDR is pointing to struct bts_struct (see asm/ds.h).
-*/
-#define PTRACE_BTS_CLEAR	44
-/* Clear the BTS buffer.
-   DATA and ADDR are ignored.
-*/
-#define PTRACE_BTS_DRAIN	45
-/* Read all available BTS records and clear the buffer.
-   ADDR points to an array of struct bts_struct.
-   DATA gives the size of that buffer.
-   BTS records are read from oldest to newest.
-   Returns number of BTS records drained.
-*/
+#endif
 
 #endif /* _ASM_X86_PTRACE_ABI_H */
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 9d369f6..78cd1ea 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -274,18 +274,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 		return 0;
 }
 
-/* Get Nth argument at function call */
-extern unsigned long regs_get_argument_nth(struct pt_regs *regs,
-					   unsigned int n);
-
-/*
- * These are defined as per linux/ptrace.h, which see.
- */
 #define arch_has_single_step()	(1)
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-
-extern void user_enable_block_step(struct task_struct *);
 #ifdef CONFIG_X86_DEBUGCTLMSR
 #define arch_has_block_step()	(1)
 #else
@@ -300,12 +289,6 @@ extern int do_get_thread_area(struct task_struct *p, int idx,
 extern int do_set_thread_area(struct task_struct *p, int idx,
 			      struct user_desc __user *info, int can_allocate);
 
-#ifdef CONFIG_X86_PTRACE_BTS
-extern void ptrace_bts_untrace(struct task_struct *tsk);
-
-#define arch_ptrace_untrace(tsk)	ptrace_bts_untrace(tsk)
-#endif /* CONFIG_X86_PTRACE_BTS */
-
 #endif /* __KERNEL__ */
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/pvclock-abi.h b/arch/x86/include/asm/pvclock-abi.h
index 6d93508..35f2d19 100644
--- a/arch/x86/include/asm/pvclock-abi.h
+++ b/arch/x86/include/asm/pvclock-abi.h
@@ -29,7 +29,8 @@ struct pvclock_vcpu_time_info {
 	u64   system_time;
 	u32   tsc_to_system_mul;
 	s8    tsc_shift;
-	u8    pad[3];
+	u8    flags;
+	u8    pad[2];
 } __attribute__((__packed__)); /* 32 bytes */
 
 struct pvclock_wall_clock {
@@ -38,5 +39,6 @@ struct pvclock_wall_clock {
 	u32   nsec;
 } __attribute__((__packed__));
 
+#define PVCLOCK_TSC_STABLE_BIT	(1 << 0)
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_PVCLOCK_ABI_H */
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 53235fd..cd02f32 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -6,6 +6,7 @@
 
 /* some helper functions for xen and kvm pv clock sources */
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
+void pvclock_set_flags(u8 flags);
 unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
 void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
 			    struct pvclock_vcpu_time_info *vcpu,
diff --git a/arch/x86/include/asm/rdc321x_defs.h b/arch/x86/include/asm/rdc321x_defs.h
deleted file mode 100644
index c8e9c8b..0000000
--- a/arch/x86/include/asm/rdc321x_defs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#define PFX	"rdc321x: "
-
-/* General purpose configuration and data registers */
-#define RDC3210_CFGREG_ADDR     0x0CF8
-#define RDC3210_CFGREG_DATA     0x0CFC
-
-#define RDC321X_GPIO_CTRL_REG1	0x48
-#define RDC321X_GPIO_CTRL_REG2	0x84
-#define RDC321X_GPIO_DATA_REG1	0x4c
-#define RDC321X_GPIO_DATA_REG2	0x88
-
-#define RDC321X_MAX_GPIO	58
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index ca7517d..606ede1 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -41,6 +41,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/lockdep.h>
+#include <asm/asm.h>
 
 struct rwsem_waiter;
 
@@ -55,17 +56,28 @@ extern asmregparm struct rw_semaphore *
 
 /*
  * the semaphore definition
+ *
+ * The bias values and the counter type limits the number of
+ * potential readers/writers to 32767 for 32 bits and 2147483647
+ * for 64 bits.
  */
 
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-#define RWSEM_ACTIVE_BIAS		0x00000001
-#define RWSEM_ACTIVE_MASK		0x0000ffff
-#define RWSEM_WAITING_BIAS		(-0x00010000)
+#ifdef CONFIG_X86_64
+# define RWSEM_ACTIVE_MASK		0xffffffffL
+#else
+# define RWSEM_ACTIVE_MASK		0x0000ffffL
+#endif
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000L
+#define RWSEM_ACTIVE_BIAS		0x00000001L
+#define RWSEM_WAITING_BIAS		(-RWSEM_ACTIVE_MASK-1)
 #define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
 #define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
 
+typedef signed long rwsem_count_t;
+
 struct rw_semaphore {
-	signed long		count;
+	rwsem_count_t		count;
 	spinlock_t		wait_lock;
 	struct list_head	wait_list;
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
@@ -105,7 +117,7 @@ do {								\
 static inline void __down_read(struct rw_semaphore *sem)
 {
 	asm volatile("# beginning down_read\n\t"
-		     LOCK_PREFIX "  incl      (%%eax)\n\t"
+		     LOCK_PREFIX _ASM_INC "(%1)\n\t"
 		     /* adds 0x00000001, returns the old value */
 		     "  jns        1f\n"
 		     "  call call_rwsem_down_read_failed\n"
@@ -121,14 +133,14 @@ static inline void __down_read(struct rw_semaphore *sem)
  */
 static inline int __down_read_trylock(struct rw_semaphore *sem)
 {
-	__s32 result, tmp;
+	rwsem_count_t result, tmp;
 	asm volatile("# beginning __down_read_trylock\n\t"
-		     "  movl      %0,%1\n\t"
+		     "  mov          %0,%1\n\t"
 		     "1:\n\t"
-		     "  movl	     %1,%2\n\t"
-		     "  addl      %3,%2\n\t"
+		     "  mov          %1,%2\n\t"
+		     "  add          %3,%2\n\t"
 		     "  jle	     2f\n\t"
-		     LOCK_PREFIX "  cmpxchgl  %2,%0\n\t"
+		     LOCK_PREFIX "  cmpxchg  %2,%0\n\t"
 		     "  jnz	     1b\n\t"
 		     "2:\n\t"
 		     "# ending __down_read_trylock\n\t"
@@ -143,13 +155,13 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
  */
 static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 {
-	int tmp;
+	rwsem_count_t tmp;
 
 	tmp = RWSEM_ACTIVE_WRITE_BIAS;
 	asm volatile("# beginning down_write\n\t"
-		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
 		     /* subtract 0x0000ffff, returns the old value */
-		     "  testl     %%edx,%%edx\n\t"
+		     "  test      %1,%1\n\t"
 		     /* was the count 0 before? */
 		     "  jz        1f\n"
 		     "  call call_rwsem_down_write_failed\n"
@@ -170,9 +182,9 @@ static inline void __down_write(struct rw_semaphore *sem)
  */
 static inline int __down_write_trylock(struct rw_semaphore *sem)
 {
-	signed long ret = cmpxchg(&sem->count,
-				  RWSEM_UNLOCKED_VALUE,
-				  RWSEM_ACTIVE_WRITE_BIAS);
+	rwsem_count_t ret = cmpxchg(&sem->count,
+				    RWSEM_UNLOCKED_VALUE,
+				    RWSEM_ACTIVE_WRITE_BIAS);
 	if (ret == RWSEM_UNLOCKED_VALUE)
 		return 1;
 	return 0;
@@ -183,9 +195,9 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
  */
 static inline void __up_read(struct rw_semaphore *sem)
 {
-	__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+	rwsem_count_t tmp = -RWSEM_ACTIVE_READ_BIAS;
 	asm volatile("# beginning __up_read\n\t"
-		     LOCK_PREFIX "  xadd      %%edx,(%%eax)\n\t"
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
 		     /* subtracts 1, returns the old value */
 		     "  jns        1f\n\t"
 		     "  call call_rwsem_wake\n"
@@ -201,18 +213,18 @@ static inline void __up_read(struct rw_semaphore *sem)
  */
 static inline void __up_write(struct rw_semaphore *sem)
 {
+	rwsem_count_t tmp;
 	asm volatile("# beginning __up_write\n\t"
-		     "  movl      %2,%%edx\n\t"
-		     LOCK_PREFIX "  xaddl     %%edx,(%%eax)\n\t"
+		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
 		     /* tries to transition
 			0xffff0001 -> 0x00000000 */
 		     "  jz       1f\n"
 		     "  call call_rwsem_wake\n"
 		     "1:\n\t"
 		     "# ending __up_write\n"
-		     : "+m" (sem->count)
-		     : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc", "edx");
+		     : "+m" (sem->count), "=d" (tmp)
+		     : "a" (sem), "1" (-RWSEM_ACTIVE_WRITE_BIAS)
+		     : "memory", "cc");
 }
 
 /*
@@ -221,33 +233,38 @@ static inline void __up_write(struct rw_semaphore *sem)
 static inline void __downgrade_write(struct rw_semaphore *sem)
 {
 	asm volatile("# beginning __downgrade_write\n\t"
-		     LOCK_PREFIX "  addl      %2,(%%eax)\n\t"
-		     /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+		     LOCK_PREFIX _ASM_ADD "%2,(%1)\n\t"
+		     /*
+		      * transitions 0xZZZZ0001 -> 0xYYYY0001 (i386)
+		      *     0xZZZZZZZZ00000001 -> 0xYYYYYYYY00000001 (x86_64)
+		      */
 		     "  jns       1f\n\t"
 		     "  call call_rwsem_downgrade_wake\n"
 		     "1:\n\t"
 		     "# ending __downgrade_write\n"
 		     : "+m" (sem->count)
-		     : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
+		     : "a" (sem), "er" (-RWSEM_WAITING_BIAS)
 		     : "memory", "cc");
 }
 
 /*
  * implement atomic add functionality
  */
-static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+static inline void rwsem_atomic_add(rwsem_count_t delta,
+				    struct rw_semaphore *sem)
 {
-	asm volatile(LOCK_PREFIX "addl %1,%0"
+	asm volatile(LOCK_PREFIX _ASM_ADD "%1,%0"
 		     : "+m" (sem->count)
-		     : "ir" (delta));
+		     : "er" (delta));
 }
 
 /*
  * implement exchange and add functionality
  */
-static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+static inline rwsem_count_t rwsem_atomic_update(rwsem_count_t delta,
+						struct rw_semaphore *sem)
 {
-	int tmp = delta;
+	rwsem_count_t tmp = delta;
 
 	asm volatile(LOCK_PREFIX "xadd %0,%1"
 		     : "+r" (tmp), "+m" (sem->count)
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 75af592..fb0b187 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -1,8 +1,9 @@
 #ifndef _ASM_X86_SCATTERLIST_H
 #define _ASM_X86_SCATTERLIST_H
 
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
 #include <asm-generic/scatterlist.h>
 
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+#define ARCH_HAS_SG_CHAIN
+
 #endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 18e496c..86b1506 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -37,10 +37,8 @@ void setup_bios_corruption_check(void);
 
 #ifdef CONFIG_X86_VISWS
 extern void visws_early_detect(void);
-extern int is_visws_box(void);
 #else
 static inline void visws_early_detect(void) { }
-static inline int is_visws_box(void) { return 0; }
 #endif
 
 extern unsigned long saved_video_mode;
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 1e79678..4cfc908 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -135,6 +135,8 @@ int native_cpu_disable(void);
 void native_cpu_die(unsigned int cpu);
 void native_play_dead(void);
 void play_dead_common(void);
+void wbinvd_on_cpu(int cpu);
+int wbinvd_on_all_cpus(void);
 
 void native_send_call_func_ipi(const struct cpumask *mask);
 void native_send_call_func_single_ipi(int cpu);
@@ -147,6 +149,13 @@ static inline int num_booting_cpus(void)
 {
 	return cpumask_weight(cpu_callout_mask);
 }
+#else /* !CONFIG_SMP */
+#define wbinvd_on_cpu(cpu)     wbinvd()
+static inline int wbinvd_on_all_cpus(void)
+{
+	wbinvd();
+	return 0;
+}
 #endif /* CONFIG_SMP */
 
 extern unsigned disabled_cpus __cpuinitdata;
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 35e8912..4dab78e 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,8 +3,6 @@
 
 extern int kstack_depth_to_print;
 
-int x86_is_stack_id(int id, char *name);
-
 struct thread_info;
 struct stacktrace_ops;
 
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index 48dcfa6..fd921c3 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -15,6 +15,8 @@ static inline int arch_prepare_suspend(void) { return 0; }
 struct saved_context {
 	u16 es, fs, gs, ss;
 	unsigned long cr0, cr2, cr3, cr4;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	struct desc_ptr gdt;
 	struct desc_ptr idt;
 	u16 ldt;
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index 06284f4..8d942af 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -27,6 +27,8 @@ struct saved_context {
 	u16 ds, es, fs, gs, ss;
 	unsigned long gs_base, gs_kernel_base, fs_base;
 	unsigned long cr0, cr2, cr3, cr4, cr8;
+	u64 misc_enable;
+	bool misc_enable_saved;
 	unsigned long efer;
 	u16 gdt_pad;
 	u16 gdt_limit;
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 1fecb7e..0e83105 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -81,7 +81,9 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 	u32 event_inj_err;
 	u64 nested_cr3;
 	u64 lbr_ctl;
-	u8 reserved_5[832];
+	u64 reserved_5;
+	u64 next_rip;
+	u8 reserved_6[816];
 };
 
 
@@ -115,6 +117,10 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 #define SVM_IOIO_SIZE_MASK (7 << SVM_IOIO_SIZE_SHIFT)
 #define SVM_IOIO_ASIZE_MASK (7 << SVM_IOIO_ASIZE_SHIFT)
 
+#define SVM_VM_CR_VALID_MASK	0x001fULL
+#define SVM_VM_CR_SVM_LOCK_MASK 0x0008ULL
+#define SVM_VM_CR_SVM_DIS_MASK  0x0010ULL
+
 struct __attribute__ ((__packed__)) vmcb_seg {
 	u16 selector;
 	u16 attrib;
@@ -238,6 +244,7 @@ struct __attribute__ ((__packed__)) vmcb {
 
 #define SVM_EXITINFOSHIFT_TS_REASON_IRET 36
 #define SVM_EXITINFOSHIFT_TS_REASON_JMP 38
+#define SVM_EXITINFOSHIFT_TS_HAS_ERROR_CODE 44
 
 #define	SVM_EXIT_READ_CR0 	0x000
 #define	SVM_EXIT_READ_CR3 	0x003
@@ -313,7 +320,7 @@ struct __attribute__ ((__packed__)) vmcb {
 
 #define SVM_EXIT_ERR		-1
 
-#define SVM_CR0_SELECTIVE_MASK (1 << 3 | 1) /* TS and MP */
+#define SVM_CR0_SELECTIVE_MASK (X86_CR0_TS | X86_CR0_MP)
 
 #define SVM_VMLOAD ".byte 0x0f, 0x01, 0xda"
 #define SVM_VMRUN  ".byte 0x0f, 0x01, 0xd8"
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index d5f6904..3ad4217 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -26,8 +26,8 @@ asmlinkage long sys32_lstat64(char __user *, struct stat64 __user *);
 asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
 asmlinkage long sys32_fstatat(unsigned int, char __user *,
 			      struct stat64 __user *, int);
-struct mmap_arg_struct;
-asmlinkage long sys32_mmap(struct mmap_arg_struct __user *);
+struct mmap_arg_struct32;
+asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *);
 asmlinkage long sys32_mprotect(unsigned long, size_t, unsigned long);
 
 struct sigaction32;
@@ -40,8 +40,6 @@ asmlinkage long sys32_rt_sigprocmask(int, compat_sigset_t __user *,
 				     compat_sigset_t __user *, unsigned int);
 asmlinkage long sys32_alarm(unsigned int);
 
-struct sel_arg_struct;
-asmlinkage long sys32_old_select(struct sel_arg_struct __user *);
 asmlinkage long sys32_waitpid(compat_pid_t, unsigned int *, int);
 asmlinkage long sys32_sysfs(int, u32, u32);
 
@@ -56,11 +54,6 @@ asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
 asmlinkage long sys32_personality(unsigned long);
 asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
 
-struct oldold_utsname;
-struct old_utsname;
-asmlinkage long sys32_olduname(struct oldold_utsname __user *);
-long sys32_uname(struct old_utsname __user *);
-
 asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
 			     compat_uptr_t __user *, struct pt_regs *);
 asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index 8d33bc5..c4a348f 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -16,6 +16,8 @@
 #include <linux/sched.h>
 #include <linux/err.h>
 
+extern const unsigned long sys_call_table[];
+
 /*
  * Only the low 32 bits of orig_ax are meaningful, so we return int.
  * This importantly ignores the high bits on 64-bit, so comparisons
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 8868b94..5c044b4 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -50,18 +50,6 @@ asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
 			     struct old_sigaction __user *);
 unsigned long sys_sigreturn(struct pt_regs *);
 
-/* kernel/sys_i386_32.c */
-struct mmap_arg_struct;
-struct sel_arg_struct;
-struct oldold_utsname;
-struct old_utsname;
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *);
-asmlinkage int old_select(struct sel_arg_struct __user *);
-asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
-asmlinkage int sys_uname(struct old_utsname __user *);
-asmlinkage int sys_olduname(struct oldold_utsname __user *);
-
 /* kernel/vm86_32.c */
 int sys_vm86old(struct vm86_struct __user *, struct pt_regs *);
 int sys_vm86(unsigned long, unsigned long, struct pt_regs *);
@@ -73,11 +61,8 @@ int sys_vm86(unsigned long, unsigned long, struct pt_regs *);
 long sys_arch_prctl(int, unsigned long);
 
 /* kernel/sys_x86_64.c */
-struct new_utsname;
-
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
 			 unsigned long, unsigned long, unsigned long);
-asmlinkage long sys_uname(struct new_utsname __user *);
 
 #endif /* CONFIG_X86_32 */
 #endif /* _ASM_X86_SYSCALLS_H */
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index ecb544e..e7f4d33 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -11,9 +11,9 @@
 #include <linux/irqflags.h>
 
 /* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
 # define AT_VECTOR_SIZE_ARCH 2
-#else
+#else /* else it's non-compat x86-64 */
 # define AT_VECTOR_SIZE_ARCH 1
 #endif
 
@@ -32,7 +32,7 @@ extern void show_regs_common(void);
 	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
 	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
 #define __switch_canary_oparam						\
-	, [stack_canary] "=m" (per_cpu_var(stack_canary.canary))
+	, [stack_canary] "=m" (stack_canary.canary)
 #define __switch_canary_iparam						\
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
@@ -114,7 +114,7 @@ do {									\
 	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
 	"movq %%r8,"__percpu_arg([gs_canary])"\n\t"
 #define __switch_canary_oparam						  \
-	, [gs_canary] "=m" (per_cpu_var(irq_stack_union.stack_canary))
+	, [gs_canary] "=m" (irq_stack_union.stack_canary)
 #define __switch_canary_iparam						  \
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
@@ -133,7 +133,7 @@ do {									\
 	     __switch_canary						  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
 	     "movq %%rax,%%rdi\n\t" 					  \
-	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"	  \
+	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"		  \
 	     "jnz   ret_from_fork\n\t"					  \
 	     RESTORE_CONTEXT						  \
 	     : "=a" (last)					  	  \
@@ -143,7 +143,7 @@ do {									\
 	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
 	       [_tif_fork] "i" (_TIF_FORK),			  	  \
 	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
-	       [current_task] "m" (per_cpu_var(current_task))		  \
+	       [current_task] "m" (current_task)			  \
 	       __switch_canary_iparam					  \
 	     : "memory", "cc" __EXTRA_CLOBBER)
 #endif
@@ -451,7 +451,7 @@ void stop_this_cpu(void *dummy);
  *
  * (Could use an alternative three way for this if there was one.)
  */
-static inline void rdtsc_barrier(void)
+static __always_inline void rdtsc_barrier(void)
 {
 	alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
 	alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index e0d2890..f0b6e5d 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -87,13 +87,12 @@ struct thread_info {
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
-#define TIF_MEMDIE		20
+#define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
 #define TIF_FREEZE		23	/* is freezing for suspend */
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
-#define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
-#define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
+#define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
 #define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
 #define TIF_SYSCALL_TRACEPOINT	28	/* syscall tracepoint instrumentation */
 
@@ -115,8 +114,7 @@ struct thread_info {
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
+#define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
 #define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 
@@ -147,7 +145,7 @@ struct thread_info {
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
-	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_NOTSC)
+	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)
 
 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
@@ -241,10 +239,9 @@ static inline struct thread_info *current_thread_info(void)
 #define TS_USEDFPU		0x0001	/* FPU was used by this task
 					   this quantum (SMP) */
 #define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
-#define TS_POLLING		0x0004	/* true if in idle loop
-					   and not sleeping */
+#define TS_POLLING		0x0004	/* idle task polling need_resched,
+					   skip sending interrupt */
 #define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal() */
-#define TS_XSAVE		0x0010	/* Use xsave/xrstor */
 
 #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
 
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index c5087d7..21899cc3 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -53,33 +53,29 @@
 extern int cpu_to_node_map[];
 
 /* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
+static inline int __cpu_to_node(int cpu)
 {
 	return cpu_to_node_map[cpu];
 }
-#define early_cpu_to_node(cpu)	cpu_to_node(cpu)
+#define early_cpu_to_node __cpu_to_node
+#define cpu_to_node __cpu_to_node
 
 #else /* CONFIG_X86_64 */
 
 /* Mappings between logical cpu number and node number */
 DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map);
 
-/* Returns the number of the current Node. */
-DECLARE_PER_CPU(int, node_number);
-#define numa_node_id()		percpu_read(node_number)
-
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-extern int cpu_to_node(int cpu);
+/*
+ * override generic percpu implementation of cpu_to_node
+ */
+extern int __cpu_to_node(int cpu);
+#define cpu_to_node __cpu_to_node
+
 extern int early_cpu_to_node(int cpu);
 
 #else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
 
-/* Returns the number of the node containing CPU 'cpu' */
-static inline int cpu_to_node(int cpu)
-{
-	return per_cpu(x86_cpu_to_node_map, cpu);
-}
-
 /* Same function but used if called before per_cpu areas are setup */
 static inline int early_cpu_to_node(int cpu)
 {
@@ -170,6 +166,10 @@ static inline int numa_node_id(void)
 {
 	return 0;
 }
+/*
+ * indicate override:
+ */
+#define numa_node_id numa_node_id
 
 static inline int early_cpu_to_node(int cpu)
 {
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 4da91ad..f66cda5 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -79,7 +79,7 @@ static inline int get_si_code(unsigned long condition)
 
 extern int panic_on_unrecovered_nmi;
 
-void math_error(void __user *);
+void math_error(struct pt_regs *, int, int);
 void math_emulate(struct math_emu_info *);
 #ifndef CONFIG_X86_32
 asmlinkage void smp_thermal_interrupt(void);
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 535e4214..316708d 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -8,6 +8,8 @@
 #include <linux/errno.h>
 #include <linux/prefetch.h>
 #include <linux/lockdep.h>
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
 #include <asm/page.h>
 
 /*
@@ -16,7 +18,24 @@
 
 /* Handles exceptions in both to and from, but doesn't do access_ok */
 __must_check unsigned long
-copy_user_generic(void *to, const void *from, unsigned len);
+copy_user_generic_string(void *to, const void *from, unsigned len);
+__must_check unsigned long
+copy_user_generic_unrolled(void *to, const void *from, unsigned len);
+
+static __always_inline __must_check unsigned long
+copy_user_generic(void *to, const void *from, unsigned len)
+{
+	unsigned ret;
+
+	alternative_call(copy_user_generic_unrolled,
+			 copy_user_generic_string,
+			 X86_FEATURE_REP_GOOD,
+			 ASM_OUTPUT2("=a" (ret), "=D" (to), "=S" (from),
+				     "=d" (len)),
+			 "1" (to), "2" (from), "3" (len)
+			 : "memory", "rcx", "r8", "r9", "r10", "r11");
+	return ret;
+}
 
 __must_check unsigned long
 _copy_to_user(void __user *to, const void *from, unsigned len);
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 3baf379..beb9b5f 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -354,6 +354,7 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_ALARM
 #define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_IPC
 #define __ARCH_WANT_SYS_PAUSE
 #define __ARCH_WANT_SYS_SGETMASK
 #define __ARCH_WANT_SYS_SIGNAL
@@ -366,6 +367,9 @@
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
+#define __ARCH_WANT_SYS_OLD_MMAP
+#define __ARCH_WANT_SYS_OLD_SELECT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 4843f7b..ff4307b 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -146,7 +146,7 @@ __SYSCALL(__NR_wait4, sys_wait4)
 #define __NR_kill				62
 __SYSCALL(__NR_kill, sys_kill)
 #define __NR_uname				63
-__SYSCALL(__NR_uname, sys_uname)
+__SYSCALL(__NR_uname, sys_newuname)
 
 #define __NR_semget				64
 __SYSCALL(__NR_semget, sys_semget)
@@ -680,6 +680,7 @@ __SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 #define __ARCH_WANT_SYS_LLSEEK
 #define __ARCH_WANT_SYS_NICE
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLD_UNAME
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
diff --git a/arch/x86/include/asm/user.h b/arch/x86/include/asm/user.h
index 999873b..24532c7 100644
--- a/arch/x86/include/asm/user.h
+++ b/arch/x86/include/asm/user.h
@@ -1,5 +1,63 @@
+#ifndef _ASM_X86_USER_H
+#define _ASM_X86_USER_H
+
 #ifdef CONFIG_X86_32
 # include "user_32.h"
 #else
 # include "user_64.h"
 #endif
+
+#include <asm/types.h>
+
+struct user_ymmh_regs {
+	/* 16 * 16 bytes for each YMMH-reg */
+	__u32 ymmh_space[64];
+};
+
+struct user_xsave_hdr {
+	__u64 xstate_bv;
+	__u64 reserved1[2];
+	__u64 reserved2[5];
+};
+
+/*
+ * The structure layout of user_xstateregs, used for exporting the
+ * extended register state through ptrace and core-dump (NT_X86_XSTATE note)
+ * interfaces will be same as the memory layout of xsave used by the processor
+ * (except for the bytes 464..511, which can be used by the software) and hence
+ * the size of this structure varies depending on the features supported by the
+ * processor and OS. The size of the structure that users need to use can be
+ * obtained by doing:
+ *     cpuid_count(0xd, 0, &eax, &ptrace_xstateregs_struct_size, &ecx, &edx);
+ * i.e., cpuid.(eax=0xd,ecx=0).ebx will be the size that user (debuggers, etc.)
+ * need to use.
+ *
+ * For now, only the first 8 bytes of the software usable bytes[464..471] will
+ * be used and will be set to OS enabled xstate mask (which is same as the
+ * 64bit mask returned by the xgetbv's xCR0).  Users (analyzing core dump
+ * remotely, etc.) can use this mask as well as the mask saved in the
+ * xstate_hdr bytes and interpret what states the processor/OS supports
+ * and what states are in modified/initialized conditions for the
+ * particular process/thread.
+ *
+ * Also when the user modifies certain state FP/SSE/etc through the
+ * ptrace interface, they must ensure that the xsave_hdr.xstate_bv
+ * bytes[512..519] of the memory layout are updated correspondingly.
+ * i.e., for example when FP state is modified to a non-init state,
+ * xsave_hdr.xstate_bv's bit 0 must be set to '1', when SSE is modified to
+ * non-init state, xsave_hdr.xstate_bv's bit 1 must to be set to '1', etc.
+ */
+#define USER_XSTATE_FX_SW_WORDS 6
+#define USER_XSTATE_XCR0_WORD	0
+
+struct user_xstateregs {
+	struct {
+		__u64 fpx_space[58];
+		__u64 xstate_fx_sw[USER_XSTATE_FX_SW_WORDS];
+	} i387;
+	struct user_xsave_hdr xsave_hdr;
+	struct user_ymmh_regs ymmh;
+	/* further processor state extensions go here */
+};
+
+#endif /* _ASM_X86_USER_H */
diff --git a/arch/x86/include/asm/uv/bios.h b/arch/x86/include/asm/uv/bios.h
index 2751f30..71605c7 100644
--- a/arch/x86/include/asm/uv/bios.h
+++ b/arch/x86/include/asm/uv/bios.h
@@ -18,8 +18,8 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
- *  Copyright (c) Russ Anderson
+ *  Copyright (c) 2008-2009 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson <rja@sgi.com>
  */
 
 #include <linux/rtc.h>
@@ -36,7 +36,8 @@ enum uv_bios_cmd {
 	UV_BIOS_WATCHLIST_ALLOC,
 	UV_BIOS_WATCHLIST_FREE,
 	UV_BIOS_MEMPROTECT,
-	UV_BIOS_GET_PARTITION_ADDR
+	UV_BIOS_GET_PARTITION_ADDR,
+	UV_BIOS_SET_LEGACY_VGA_TARGET
 };
 
 /*
@@ -89,13 +90,14 @@ extern s64 uv_bios_call(enum uv_bios_cmd, u64, u64, u64, u64, u64);
 extern s64 uv_bios_call_irqsave(enum uv_bios_cmd, u64, u64, u64, u64, u64);
 extern s64 uv_bios_call_reentrant(enum uv_bios_cmd, u64, u64, u64, u64, u64);
 
-extern s64 uv_bios_get_sn_info(int, int *, long *, long *, long *);
+extern s64 uv_bios_get_sn_info(int, int *, long *, long *, long *, long *);
 extern s64 uv_bios_freq_base(u64, u64 *);
 extern int uv_bios_mq_watchlist_alloc(unsigned long, unsigned int,
 					unsigned long *);
 extern int uv_bios_mq_watchlist_free(int, int);
 extern s64 uv_bios_change_memprotect(u64, u64, enum uv_memprotect);
 extern s64 uv_bios_reserved_page_pa(u64, u64 *, u64 *, u64 *);
+extern int uv_bios_set_legacy_vga_target(bool decode, int domain, int bus);
 
 extern void uv_bios_init(void);
 
@@ -104,6 +106,7 @@ extern int uv_type;
 extern long sn_partition_id;
 extern long sn_coherency_id;
 extern long sn_region_size;
+extern long system_serial_number;
 #define partition_coherence_id()	(sn_coherency_id)
 
 extern struct kobject *sgi_uv_kobj;	/* /sys/firmware/sgi_uv */
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index c0a01b5..3bb9491 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -11,6 +11,7 @@ struct mm_struct;
 extern enum uv_system_type get_uv_system_type(void);
 extern int is_uv_system(void);
 extern void uv_cpu_init(void);
+extern void uv_nmi_init(void);
 extern void uv_system_init(void);
 extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 						 struct mm_struct *mm,
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index b414d2b..aa558ac 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -27,13 +27,14 @@
  * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
  *
  * We will use 31 sets, one for sending BAU messages from each of the 32
- * cpu's on the node.
+ * cpu's on the uvhub.
  *
  * TLB shootdown will use the first of the 8 descriptors of each set.
  * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
  */
 
 #define UV_ITEMS_PER_DESCRIPTOR		8
+#define MAX_BAU_CONCURRENT		3
 #define UV_CPUS_PER_ACT_STATUS		32
 #define UV_ACT_STATUS_MASK		0x3
 #define UV_ACT_STATUS_SIZE		2
@@ -45,6 +46,9 @@
 #define UV_PAYLOADQ_PNODE_SHIFT		49
 #define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
 #define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
 
 /*
  * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
@@ -55,15 +59,29 @@
 #define DESC_STATUS_SOURCE_TIMEOUT	3
 
 /*
- * source side thresholds at which message retries print a warning
+ * source side threshholds at which message retries print a warning
  */
 #define SOURCE_TIMEOUT_LIMIT		20
 #define DESTINATION_TIMEOUT_LIMIT	20
 
 /*
+ * misc. delays, in microseconds
+ */
+#define THROTTLE_DELAY			10
+#define TIMEOUT_DELAY			10
+#define BIOS_TO				1000
+/* BIOS is assumed to set the destination timeout to 1003520 nanoseconds */
+
+/*
+ * threshholds at which to use IPI to free resources
+ */
+#define PLUGSB4RESET 100
+#define TIMEOUTSB4RESET 100
+
+/*
  * number of entries in the destination side payload queue
  */
-#define DEST_Q_SIZE			17
+#define DEST_Q_SIZE			20
 /*
  * number of destination side software ack resources
  */
@@ -72,9 +90,10 @@
 /*
  * completion statuses for sending a TLB flush message
  */
-#define	FLUSH_RETRY			1
-#define	FLUSH_GIVEUP			2
-#define	FLUSH_COMPLETE			3
+#define FLUSH_RETRY_PLUGGED		1
+#define FLUSH_RETRY_TIMEOUT		2
+#define FLUSH_GIVEUP			3
+#define FLUSH_COMPLETE			4
 
 /*
  * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
@@ -86,14 +105,14 @@
  * 'base_dest_nodeid' field of the header corresponds to the
  * destination nodeID associated with that specified bit.
  */
-struct bau_target_nodemask {
-	unsigned long bits[BITS_TO_LONGS(256)];
+struct bau_target_uvhubmask {
+	unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)];
 };
 
 /*
- * mask of cpu's on a node
+ * mask of cpu's on a uvhub
  * (during initialization we need to check that unsigned long has
- *  enough bits for max. cpu's per node)
+ *  enough bits for max. cpu's per uvhub)
  */
 struct bau_local_cpumask {
 	unsigned long bits;
@@ -135,8 +154,8 @@ struct bau_msg_payload {
 struct bau_msg_header {
 	unsigned int dest_subnodeid:6;	/* must be 0x10, for the LB */
 	/* bits 5:0 */
-	unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
-	/* bits 20:6 */			  /* first bit in node_map */
+	unsigned int base_dest_nodeid:15; /* nasid (pnode<<1) of */
+	/* bits 20:6 */			  /* first bit in uvhub map */
 	unsigned int command:8;	/* message type */
 	/* bits 28:21 */
 				/* 0x38: SN3net EndPoint Message */
@@ -146,26 +165,38 @@ struct bau_msg_header {
 	unsigned int rsvd_2:9;	/* must be zero */
 	/* bits 40:32 */
 				/* Suppl_A is 56-41 */
-	unsigned int payload_2a:8;/* becomes byte 16 of msg */
-	/* bits 48:41 */	/* not currently using */
-	unsigned int payload_2b:8;/* becomes byte 17 of msg */
-	/* bits 56:49 */	/* not currently using */
+	unsigned int sequence:16;/* message sequence number */
+	/* bits 56:41 */	/* becomes bytes 16-17 of msg */
 				/* Address field (96:57) is never used as an
 				   address (these are address bits 42:3) */
+
 	unsigned int rsvd_3:1;	/* must be zero */
 	/* bit 57 */
 				/* address bits 27:4 are payload */
-				/* these 24 bits become bytes 12-14 of msg */
+	/* these next 24  (58-81) bits become bytes 12-14 of msg */
+
+	/* bits 65:58 land in byte 12 */
 	unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */
 	/* bit 58 */
-
-	unsigned int payload_1a:5;/* not currently used */
-	/* bits 63:59 */
-	unsigned int payload_1b:8;/* not currently used */
-	/* bits 71:64 */
-	unsigned int payload_1c:8;/* not currently used */
-	/* bits 79:72 */
-	unsigned int payload_1d:2;/* not currently used */
+	unsigned int msg_type:3; /* software type of the message*/
+	/* bits 61:59 */
+	unsigned int canceled:1; /* message canceled, resource to be freed*/
+	/* bit 62 */
+	unsigned int payload_1a:1;/* not currently used */
+	/* bit 63 */
+	unsigned int payload_1b:2;/* not currently used */
+	/* bits 65:64 */
+
+	/* bits 73:66 land in byte 13 */
+	unsigned int payload_1ca:6;/* not currently used */
+	/* bits 71:66 */
+	unsigned int payload_1c:2;/* not currently used */
+	/* bits 73:72 */
+
+	/* bits 81:74 land in byte 14 */
+	unsigned int payload_1d:6;/* not currently used */
+	/* bits 79:74 */
+	unsigned int payload_1e:2;/* not currently used */
 	/* bits 81:80 */
 
 	unsigned int rsvd_4:7;	/* must be zero */
@@ -178,7 +209,7 @@ struct bau_msg_header {
 	/* bits 95:90 */
 	unsigned int rsvd_6:5;	/* must be zero */
 	/* bits 100:96 */
-	unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */
+	unsigned int int_both:1;/* if 1, interrupt both sockets on the uvhub */
 	/* bit 101*/
 	unsigned int fairness:3;/* usually zero */
 	/* bits 104:102 */
@@ -191,13 +222,18 @@ struct bau_msg_header {
 	/* bits 127:107 */
 };
 
+/* see msg_type: */
+#define MSG_NOOP 0
+#define MSG_REGULAR 1
+#define MSG_RETRY 2
+
 /*
  * The activation descriptor:
  * The format of the message to send, plus all accompanying control
  * Should be 64 bytes
  */
 struct bau_desc {
-	struct bau_target_nodemask distribution;
+	struct bau_target_uvhubmask distribution;
 	/*
 	 * message template, consisting of header and payload:
 	 */
@@ -237,19 +273,25 @@ struct bau_payload_queue_entry {
 	unsigned short acknowledge_count; /* filled in by destination */
 	/* 16 bits, bytes 10-11 */
 
-	unsigned short replied_to:1;	/* sent as 0 by the source */
-	/* 1 bit */
-	unsigned short unused1:7;       /* not currently using */
-	/* 7 bits: byte 12) */
+	/* these next 3 bytes come from bits 58-81 of the message header */
+	unsigned short replied_to:1;    /* sent as 0 by the source */
+	unsigned short msg_type:3;      /* software message type */
+	unsigned short canceled:1;      /* sent as 0 by the source */
+	unsigned short unused1:3;       /* not currently using */
+	/* byte 12 */
 
-	unsigned char unused2[2];	/* not currently using */
-	/* bytes 13-14 */
+	unsigned char unused2a;		/* not currently using */
+	/* byte 13 */
+	unsigned char unused2;		/* not currently using */
+	/* byte 14 */
 
 	unsigned char sw_ack_vector;	/* filled in by the hardware */
 	/* byte 15 (bits 127:120) */
 
-	unsigned char unused4[3];	/* not currently using bytes 17-19 */
-	/* bytes 17-19 */
+	unsigned short sequence;	/* message sequence number */
+	/* bytes 16-17 */
+	unsigned char unused4[2];	/* not currently using bytes 18-19 */
+	/* bytes 18-19 */
 
 	int number_of_cpus;		/* filled in at destination */
 	/* 32 bits, bytes 20-23 (aligned) */
@@ -259,63 +301,93 @@ struct bau_payload_queue_entry {
 };
 
 /*
- * one for every slot in the destination payload queue
- */
-struct bau_msg_status {
-	struct bau_local_cpumask seen_by;	/* map of cpu's */
-};
-
-/*
- * one for every slot in the destination software ack resources
- */
-struct bau_sw_ack_status {
-	struct bau_payload_queue_entry *msg;	/* associated message */
-	int watcher;				/* cpu monitoring, or -1 */
-};
-
-/*
- * one on every node and per-cpu; to locate the software tables
+ * one per-cpu; to locate the software tables
  */
 struct bau_control {
 	struct bau_desc *descriptor_base;
-	struct bau_payload_queue_entry *bau_msg_head;
 	struct bau_payload_queue_entry *va_queue_first;
 	struct bau_payload_queue_entry *va_queue_last;
-	struct bau_msg_status *msg_statuses;
-	int *watching; /* pointer to array */
+	struct bau_payload_queue_entry *bau_msg_head;
+	struct bau_control *uvhub_master;
+	struct bau_control *socket_master;
+	unsigned long timeout_interval;
+	atomic_t active_descriptor_count;
+	int max_concurrent;
+	int max_concurrent_constant;
+	int retry_message_scans;
+	int plugged_tries;
+	int timeout_tries;
+	int ipi_attempts;
+	int conseccompletes;
+	short cpu;
+	short uvhub_cpu;
+	short uvhub;
+	short cpus_in_socket;
+	short cpus_in_uvhub;
+	unsigned short message_number;
+	unsigned short uvhub_quiesce;
+	short socket_acknowledge_count[DEST_Q_SIZE];
+	cycles_t send_message;
+	spinlock_t masks_lock;
+	spinlock_t uvhub_lock;
+	spinlock_t queue_lock;
 };
 
 /*
  * This structure is allocated per_cpu for UV TLB shootdown statistics.
  */
 struct ptc_stats {
-	unsigned long ptc_i;	/* number of IPI-style flushes */
-	unsigned long requestor;	/* number of nodes this cpu sent to */
-	unsigned long requestee;	/* times cpu was remotely requested */
-	unsigned long alltlb;	/* times all tlb's on this cpu were flushed */
-	unsigned long onetlb;	/* times just one tlb on this cpu was flushed */
-	unsigned long s_retry;	/* retries on source side timeouts */
-	unsigned long d_retry;	/* retries on destination side timeouts */
-	unsigned long sflush;	/* cycles spent in uv_flush_tlb_others */
-	unsigned long dflush;	/* cycles spent on destination side */
-	unsigned long retriesok; /* successes on retries */
-	unsigned long nomsg;	/* interrupts with no message */
-	unsigned long multmsg;	/* interrupts with multiple messages */
-	unsigned long ntargeted;/* nodes targeted */
+	/* sender statistics */
+	unsigned long s_giveup; /* number of fall backs to IPI-style flushes */
+	unsigned long s_requestor; /* number of shootdown requests */
+	unsigned long s_stimeout; /* source side timeouts */
+	unsigned long s_dtimeout; /* destination side timeouts */
+	unsigned long s_time; /* time spent in sending side */
+	unsigned long s_retriesok; /* successful retries */
+	unsigned long s_ntargcpu; /* number of cpus targeted */
+	unsigned long s_ntarguvhub; /* number of uvhubs targeted */
+	unsigned long s_ntarguvhub16; /* number of times >= 16 target hubs */
+	unsigned long s_ntarguvhub8; /* number of times >= 8 target hubs */
+	unsigned long s_ntarguvhub4; /* number of times >= 4 target hubs */
+	unsigned long s_ntarguvhub2; /* number of times >= 2 target hubs */
+	unsigned long s_ntarguvhub1; /* number of times == 1 target hub */
+	unsigned long s_resets_plug; /* ipi-style resets from plug state */
+	unsigned long s_resets_timeout; /* ipi-style resets from timeouts */
+	unsigned long s_busy; /* status stayed busy past s/w timer */
+	unsigned long s_throttles; /* waits in throttle */
+	unsigned long s_retry_messages; /* retry broadcasts */
+	/* destination statistics */
+	unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */
+	unsigned long d_onetlb; /* times just one tlb on this cpu was flushed */
+	unsigned long d_multmsg; /* interrupts with multiple messages */
+	unsigned long d_nomsg; /* interrupts with no message */
+	unsigned long d_time; /* time spent on destination side */
+	unsigned long d_requestee; /* number of messages processed */
+	unsigned long d_retries; /* number of retry messages processed */
+	unsigned long d_canceled; /* number of messages canceled by retries */
+	unsigned long d_nocanceled; /* retries that found nothing to cancel */
+	unsigned long d_resets; /* number of ipi-style requests processed */
+	unsigned long d_rcanceled; /* number of messages canceled by resets */
 };
 
-static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
+static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp)
 {
-	return constant_test_bit(node, &dstp->bits[0]);
+	return constant_test_bit(uvhub, &dstp->bits[0]);
 }
-static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
+static inline void bau_uvhub_set(int uvhub, struct bau_target_uvhubmask *dstp)
 {
-	__set_bit(node, &dstp->bits[0]);
+	__set_bit(uvhub, &dstp->bits[0]);
 }
-static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
+static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp,
+				    int nbits)
 {
 	bitmap_zero(&dstp->bits[0], nbits);
 }
+static inline int bau_uvhub_weight(struct bau_target_uvhubmask *dstp)
+{
+	return bitmap_weight((unsigned long *)&dstp->bits[0],
+				UV_DISTRIBUTION_SIZE);
+}
 
 static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
 {
@@ -328,4 +400,35 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
 extern void uv_bau_message_intr1(void);
 extern void uv_bau_timeout_intr1(void);
 
+struct atomic_short {
+	short counter;
+};
+
+/**
+ * atomic_read_short - read a short atomic variable
+ * @v: pointer of type atomic_short
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read_short(const struct atomic_short *v)
+{
+	return v->counter;
+}
+
+/**
+ * atomic_add_short_return - add and return a short int
+ * @i: short value to add
+ * @v: pointer of type atomic_short
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_short_return(short i, struct atomic_short *v)
+{
+	short __i = i;
+	asm volatile(LOCK_PREFIX "xaddw %0, %1"
+			: "+r" (i), "+m" (v->counter)
+			: : "memory");
+	return i + __i;
+}
+
 #endif /* _ASM_X86_UV_UV_BAU_H */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 40be813..bf6b88e 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -307,7 +307,7 @@ static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset
  * Access Global MMR space using the MMR space located at the top of physical
  * memory.
  */
-static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset)
+static inline volatile void __iomem *uv_global_mmr64_address(int pnode, unsigned long offset)
 {
 	return __va(UV_GLOBAL_MMR64_BASE |
 		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
@@ -329,7 +329,8 @@ static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset
  */
 static inline unsigned long uv_global_gru_mmr_address(int pnode, unsigned long offset)
 {
-	return UV_GLOBAL_GRU_MMR_BASE | offset | (pnode << uv_hub_info->m_val);
+	return UV_GLOBAL_GRU_MMR_BASE | offset |
+		((unsigned long)pnode << uv_hub_info->m_val);
 }
 
 static inline void uv_write_global_mmr8(int pnode, unsigned long offset, unsigned char val)
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 2cae46c..b2f2d2e 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -1,4 +1,3 @@
-
 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -15,13 +14,25 @@
 #define UV_MMR_ENABLE		(1UL << 63)
 
 /* ========================================================================= */
+/*                          UVH_BAU_DATA_BROADCAST                           */
+/* ========================================================================= */
+#define UVH_BAU_DATA_BROADCAST 0x61688UL
+#define UVH_BAU_DATA_BROADCAST_32 0x0440
+
+#define UVH_BAU_DATA_BROADCAST_ENABLE_SHFT 0
+#define UVH_BAU_DATA_BROADCAST_ENABLE_MASK 0x0000000000000001UL
+
+union uvh_bau_data_broadcast_u {
+    unsigned long	v;
+    struct uvh_bau_data_broadcast_s {
+	unsigned long	enable :  1;  /* RW */
+	unsigned long	rsvd_1_63: 63;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
 /*                           UVH_BAU_DATA_CONFIG                             */
 /* ========================================================================= */
-#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
-#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
-/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
 #define UVH_BAU_DATA_CONFIG 0x61680UL
 #define UVH_BAU_DATA_CONFIG_32 0x0438
 
@@ -604,6 +615,68 @@ union uvh_lb_bau_intd_software_acknowledge_u {
 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70
 
 /* ========================================================================= */
+/*                         UVH_LB_BAU_MISC_CONTROL                           */
+/* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UVH_LB_BAU_MISC_CONTROL_32 0x00a10
+
+#define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0
+#define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL
+#define UVH_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8
+#define UVH_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL
+#define UVH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9
+#define UVH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL
+#define UVH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10
+#define UVH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL
+#define UVH_LB_BAU_MISC_CONTROL_CSI_AGENT_PRESENCE_VECTOR_SHFT 11
+#define UVH_LB_BAU_MISC_CONTROL_CSI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL
+#define UVH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14
+#define UVH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL
+#define UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16
+#define UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL
+#define UVH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21
+#define UVH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL
+#define UVH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22
+#define UVH_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL
+#define UVH_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23
+#define UVH_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL
+#define UVH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24
+#define UVH_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL
+#define UVH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27
+#define UVH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28
+#define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
+#define UVH_LB_BAU_MISC_CONTROL_FUN_SHFT 48
+#define UVH_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL
+
+union uvh_lb_bau_misc_control_u {
+    unsigned long	v;
+    struct uvh_lb_bau_misc_control_s {
+	unsigned long	rejection_delay                    :  8;  /* RW */
+	unsigned long	apic_mode                          :  1;  /* RW */
+	unsigned long	force_broadcast                    :  1;  /* RW */
+	unsigned long	force_lock_nop                     :  1;  /* RW */
+	unsigned long	csi_agent_presence_vector          :  3;  /* RW */
+	unsigned long	descriptor_fetch_mode              :  1;  /* RW */
+	unsigned long	enable_intd_soft_ack_mode          :  1;  /* RW */
+	unsigned long	intd_soft_ack_timeout_period       :  4;  /* RW */
+	unsigned long	enable_dual_mapping_mode           :  1;  /* RW */
+	unsigned long	vga_io_port_decode_enable          :  1;  /* RW */
+	unsigned long	vga_io_port_16_bit_decode          :  1;  /* RW */
+	unsigned long	suppress_dest_registration         :  1;  /* RW */
+	unsigned long	programmed_initial_priority        :  3;  /* RW */
+	unsigned long	use_incoming_priority              :  1;  /* RW */
+	unsigned long	enable_programmed_initial_priority :  1;  /* RW */
+	unsigned long	rsvd_29_47                         : 19;  /*    */
+	unsigned long	fun                                : 16;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
 /*                     UVH_LB_BAU_SB_ACTIVATION_CONTROL                      */
 /* ========================================================================= */
 #define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
@@ -681,334 +754,6 @@ union uvh_lb_bau_sb_descriptor_base_u {
 };
 
 /* ========================================================================= */
-/*                      UVH_LB_MCAST_AOERR0_RPT_ENABLE                       */
-/* ========================================================================= */
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL
-
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_SHFT 22
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_AMO_TIMEOUT_MASK 0x0000000000400000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_SHFT 23
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_PUT_TIMEOUT_MASK 0x0000000000800000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 24
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000001000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 25
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000002000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 26
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000004000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 27
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000008000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 28
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000010000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 29
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000020000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 30
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000040000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 31
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000080000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 32
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000100000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 33
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000200000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 34
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000400000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 35
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000800000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 36
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000001000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 37
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000002000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 38
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000004000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 39
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000008000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 40
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000010000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 41
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000020000000000UL
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 42
-#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000040000000000UL
-
-union uvh_lb_mcast_aoerr0_rpt_enable_u {
-    unsigned long	v;
-    struct uvh_lb_mcast_aoerr0_rpt_enable_s {
-	unsigned long	mcast_obese_msg                         :  1;  /* RW */
-	unsigned long	mcast_data_sb_err                       :  1;  /* RW */
-	unsigned long	mcast_nack_buff_parity                  :  1;  /* RW */
-	unsigned long	mcast_timeout                           :  1;  /* RW */
-	unsigned long	mcast_inactive_reply                    :  1;  /* RW */
-	unsigned long	mcast_upgrade_error                     :  1;  /* RW */
-	unsigned long	mcast_reg_count_underflow               :  1;  /* RW */
-	unsigned long	mcast_rep_obese_msg                     :  1;  /* RW */
-	unsigned long	ucache_req_runt_msg                     :  1;  /* RW */
-	unsigned long	ucache_req_obese_msg                    :  1;  /* RW */
-	unsigned long	ucache_req_data_sb_err                  :  1;  /* RW */
-	unsigned long	ucache_rep_runt_msg                     :  1;  /* RW */
-	unsigned long	ucache_rep_obese_msg                    :  1;  /* RW */
-	unsigned long	ucache_rep_data_sb_err                  :  1;  /* RW */
-	unsigned long	ucache_rep_command_err                  :  1;  /* RW */
-	unsigned long	ucache_pend_timeout                     :  1;  /* RW */
-	unsigned long	macc_req_runt_msg                       :  1;  /* RW */
-	unsigned long	macc_req_obese_msg                      :  1;  /* RW */
-	unsigned long	macc_req_data_sb_err                    :  1;  /* RW */
-	unsigned long	macc_rep_runt_msg                       :  1;  /* RW */
-	unsigned long	macc_rep_obese_msg                      :  1;  /* RW */
-	unsigned long	macc_rep_data_sb_err                    :  1;  /* RW */
-	unsigned long	macc_amo_timeout                        :  1;  /* RW */
-	unsigned long	macc_put_timeout                        :  1;  /* RW */
-	unsigned long	macc_spurious_event                     :  1;  /* RW */
-	unsigned long	ioh_destination_table_parity            :  1;  /* RW */
-	unsigned long	get_had_error_reply                     :  1;  /* RW */
-	unsigned long	get_timeout                             :  1;  /* RW */
-	unsigned long	lock_manager_had_error_reply            :  1;  /* RW */
-	unsigned long	put_had_error_reply                     :  1;  /* RW */
-	unsigned long	put_timeout                             :  1;  /* RW */
-	unsigned long	sb_activation_overrun                   :  1;  /* RW */
-	unsigned long	completed_gb_activation_had_error_reply :  1;  /* RW */
-	unsigned long	completed_gb_activation_timeout         :  1;  /* RW */
-	unsigned long	descriptor_buffer_0_parity              :  1;  /* RW */
-	unsigned long	descriptor_buffer_1_parity              :  1;  /* RW */
-	unsigned long	socket_destination_table_parity         :  1;  /* RW */
-	unsigned long	bau_reply_payload_corruption            :  1;  /* RW */
-	unsigned long	io_port_destination_table_parity        :  1;  /* RW */
-	unsigned long	intd_soft_ack_timeout                   :  1;  /* RW */
-	unsigned long	int_rep_obese_msg                       :  1;  /* RW */
-	unsigned long	int_rep_command_err                     :  1;  /* RW */
-	unsigned long	int_timeout                             :  1;  /* RW */
-	unsigned long	rsvd_43_63                              : 21;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_LOCAL_INT0_CONFIG                            */
-/* ========================================================================= */
-#define UVH_LOCAL_INT0_CONFIG 0x61000UL
-
-#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0
-#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8
-#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11
-#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12
-#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13
-#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15
-#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16
-#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32
-#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_local_int0_config_u {
-    unsigned long	v;
-    struct uvh_local_int0_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                          UVH_LOCAL_INT0_ENABLE                            */
-/* ========================================================================= */
-#define UVH_LOCAL_INT0_ENABLE 0x65000UL
-
-#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0
-#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1
-#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2
-#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL
-#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3
-#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL
-#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4
-#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL
-#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5
-#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL
-#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6
-#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14
-#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15
-#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16
-#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17
-#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18
-#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19
-#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20
-#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL
-#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21
-#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL
-#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22
-#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38
-#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL
-#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39
-#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL
-#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40
-#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL
-#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41
-#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL
-#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42
-#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43
-#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL
-#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44
-#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
-
-union uvh_local_int0_enable_u {
-    unsigned long	v;
-    struct uvh_local_int0_enable_s {
-	unsigned long	lb_hcerr            :  1;  /* RW */
-	unsigned long	gr0_hcerr           :  1;  /* RW */
-	unsigned long	gr1_hcerr           :  1;  /* RW */
-	unsigned long	lh_hcerr            :  1;  /* RW */
-	unsigned long	rh_hcerr            :  1;  /* RW */
-	unsigned long	xn_hcerr            :  1;  /* RW */
-	unsigned long	si_hcerr            :  1;  /* RW */
-	unsigned long	lb_aoerr0           :  1;  /* RW */
-	unsigned long	gr0_aoerr0          :  1;  /* RW */
-	unsigned long	gr1_aoerr0          :  1;  /* RW */
-	unsigned long	lh_aoerr0           :  1;  /* RW */
-	unsigned long	rh_aoerr0           :  1;  /* RW */
-	unsigned long	xn_aoerr0           :  1;  /* RW */
-	unsigned long	si_aoerr0           :  1;  /* RW */
-	unsigned long	lb_aoerr1           :  1;  /* RW */
-	unsigned long	gr0_aoerr1          :  1;  /* RW */
-	unsigned long	gr1_aoerr1          :  1;  /* RW */
-	unsigned long	lh_aoerr1           :  1;  /* RW */
-	unsigned long	rh_aoerr1           :  1;  /* RW */
-	unsigned long	xn_aoerr1           :  1;  /* RW */
-	unsigned long	si_aoerr1           :  1;  /* RW */
-	unsigned long	rh_vpi_int          :  1;  /* RW */
-	unsigned long	system_shutdown_int :  1;  /* RW */
-	unsigned long	lb_irq_int_0        :  1;  /* RW */
-	unsigned long	lb_irq_int_1        :  1;  /* RW */
-	unsigned long	lb_irq_int_2        :  1;  /* RW */
-	unsigned long	lb_irq_int_3        :  1;  /* RW */
-	unsigned long	lb_irq_int_4        :  1;  /* RW */
-	unsigned long	lb_irq_int_5        :  1;  /* RW */
-	unsigned long	lb_irq_int_6        :  1;  /* RW */
-	unsigned long	lb_irq_int_7        :  1;  /* RW */
-	unsigned long	lb_irq_int_8        :  1;  /* RW */
-	unsigned long	lb_irq_int_9        :  1;  /* RW */
-	unsigned long	lb_irq_int_10       :  1;  /* RW */
-	unsigned long	lb_irq_int_11       :  1;  /* RW */
-	unsigned long	lb_irq_int_12       :  1;  /* RW */
-	unsigned long	lb_irq_int_13       :  1;  /* RW */
-	unsigned long	lb_irq_int_14       :  1;  /* RW */
-	unsigned long	lb_irq_int_15       :  1;  /* RW */
-	unsigned long	l1_nmi_int          :  1;  /* RW */
-	unsigned long	stop_clock          :  1;  /* RW */
-	unsigned long	asic_to_l1          :  1;  /* RW */
-	unsigned long	l1_to_asic          :  1;  /* RW */
-	unsigned long	ltc_int             :  1;  /* RW */
-	unsigned long	la_seq_trigger      :  1;  /* RW */
-	unsigned long	rsvd_45_63          : 19;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */
 #define UVH_NODE_ID 0x0UL
@@ -1112,26 +857,6 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
 };
 
 /* ========================================================================= */
-/*                    UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR                      */
-/* ========================================================================= */
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR 0x1600020UL
-
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT 26
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_rh_gam_cfg_overlay_config_mmr_u {
-    unsigned long	v;
-    struct uvh_rh_gam_cfg_overlay_config_mmr_s {
-	unsigned long	rsvd_0_25: 26;  /*    */
-	unsigned long	base   : 20;  /* RW */
-	unsigned long	rsvd_46_62: 17;  /*    */
-	unsigned long	enable :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
 /*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
@@ -1263,101 +988,6 @@ union uvh_rtc1_int_config_u {
 };
 
 /* ========================================================================= */
-/*                           UVH_RTC2_INT_CONFIG                             */
-/* ========================================================================= */
-#define UVH_RTC2_INT_CONFIG 0x61600UL
-
-#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
-#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
-#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
-#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
-#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_RTC2_INT_CONFIG_P_SHFT 13
-#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_RTC2_INT_CONFIG_T_SHFT 15
-#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_RTC2_INT_CONFIG_M_SHFT 16
-#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
-#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_rtc2_int_config_u {
-    unsigned long	v;
-    struct uvh_rtc2_int_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                           UVH_RTC3_INT_CONFIG                             */
-/* ========================================================================= */
-#define UVH_RTC3_INT_CONFIG 0x61640UL
-
-#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
-#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
-#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
-#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
-#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
-#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
-#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
-#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
-#define UVH_RTC3_INT_CONFIG_P_SHFT 13
-#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
-#define UVH_RTC3_INT_CONFIG_T_SHFT 15
-#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
-#define UVH_RTC3_INT_CONFIG_M_SHFT 16
-#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
-#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
-#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
-
-union uvh_rtc3_int_config_u {
-    unsigned long	v;
-    struct uvh_rtc3_int_config_s {
-	unsigned long	vector_  :  8;  /* RW */
-	unsigned long	dm       :  3;  /* RW */
-	unsigned long	destmode :  1;  /* RW */
-	unsigned long	status   :  1;  /* RO */
-	unsigned long	p        :  1;  /* RO */
-	unsigned long	rsvd_14  :  1;  /*    */
-	unsigned long	t        :  1;  /* RO */
-	unsigned long	m        :  1;  /* RW */
-	unsigned long	rsvd_17_31: 15;  /*    */
-	unsigned long	apic_id  : 32;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                            UVH_RTC_INC_RATIO                              */
-/* ========================================================================= */
-#define UVH_RTC_INC_RATIO 0x350000UL
-
-#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
-#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
-#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
-#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
-
-union uvh_rtc_inc_ratio_u {
-    unsigned long	v;
-    struct uvh_rtc_inc_ratio_s {
-	unsigned long	fraction : 20;  /* RW */
-	unsigned long	ratio    :  3;  /* RW */
-	unsigned long	rsvd_23_63: 41;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
 /*                          UVH_SI_ADDR_MAP_CONFIG                           */
 /* ========================================================================= */
 #define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
index 166adf6..2edb376 100644
--- a/arch/x86/include/asm/visws/cobalt.h
+++ b/arch/x86/include/asm/visws/cobalt.h
@@ -122,4 +122,6 @@ extern char visws_board_type;
 
 extern char visws_board_rev;
 
+extern int pci_visws_init(void);
+
 #endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
deleted file mode 100644
index e49ed6d..0000000
--- a/arch/x86/include/asm/vmware.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2008, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef ASM_X86__VMWARE_H
-#define ASM_X86__VMWARE_H
-
-extern void vmware_platform_setup(void);
-extern int vmware_platform(void);
-extern void vmware_set_feature_bits(struct cpuinfo_x86 *c);
-
-#endif
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 2b49454..9e6779f 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -25,6 +25,8 @@
  *
  */
 
+#include <linux/types.h>
+
 /*
  * Definitions of Primary Processor-Based VM-Execution Controls.
  */
@@ -53,6 +55,7 @@
  */
 #define SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES 0x00000001
 #define SECONDARY_EXEC_ENABLE_EPT               0x00000002
+#define SECONDARY_EXEC_RDTSCP			0x00000008
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING		0x00000040
 #define SECONDARY_EXEC_UNRESTRICTED_GUEST	0x00000080
@@ -119,6 +122,8 @@ enum vmcs_field {
 	GUEST_IA32_DEBUGCTL_HIGH        = 0x00002803,
 	GUEST_IA32_PAT			= 0x00002804,
 	GUEST_IA32_PAT_HIGH		= 0x00002805,
+	GUEST_IA32_EFER			= 0x00002806,
+	GUEST_IA32_EFER_HIGH		= 0x00002807,
 	GUEST_PDPTR0                    = 0x0000280a,
 	GUEST_PDPTR0_HIGH               = 0x0000280b,
 	GUEST_PDPTR1                    = 0x0000280c,
@@ -129,6 +134,8 @@ enum vmcs_field {
 	GUEST_PDPTR3_HIGH               = 0x00002811,
 	HOST_IA32_PAT			= 0x00002c00,
 	HOST_IA32_PAT_HIGH		= 0x00002c01,
+	HOST_IA32_EFER			= 0x00002c02,
+	HOST_IA32_EFER_HIGH		= 0x00002c03,
 	PIN_BASED_VM_EXEC_CONTROL       = 0x00004000,
 	CPU_BASED_VM_EXEC_CONTROL       = 0x00004002,
 	EXCEPTION_BITMAP                = 0x00004004,
@@ -251,6 +258,7 @@ enum vmcs_field {
 #define EXIT_REASON_MSR_READ            31
 #define EXIT_REASON_MSR_WRITE           32
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_MONITOR_INSTRUCTION 39
 #define EXIT_REASON_PAUSE_INSTRUCTION   40
 #define EXIT_REASON_MCE_DURING_VMENTRY	 41
 #define EXIT_REASON_TPR_BELOW_THRESHOLD 43
@@ -362,6 +370,7 @@ enum vmcs_field {
 #define VMX_EPTP_UC_BIT				(1ull << 8)
 #define VMX_EPTP_WB_BIT				(1ull << 14)
 #define VMX_EPT_2MB_PAGE_BIT			(1ull << 16)
+#define VMX_EPT_1GB_PAGE_BIT			(1ull << 17)
 #define VMX_EPT_EXTENT_INDIVIDUAL_BIT		(1ull << 24)
 #define VMX_EPT_EXTENT_CONTEXT_BIT		(1ull << 25)
 #define VMX_EPT_EXTENT_GLOBAL_BIT		(1ull << 26)
@@ -374,7 +383,7 @@ enum vmcs_field {
 #define VMX_EPT_READABLE_MASK			0x1ull
 #define VMX_EPT_WRITABLE_MASK			0x2ull
 #define VMX_EPT_EXECUTABLE_MASK			0x4ull
-#define VMX_EPT_IGMT_BIT    			(1ull << 6)
+#define VMX_EPT_IPAT_BIT    			(1ull << 6)
 
 #define VMX_EPT_IDENTITY_PAGETABLE_ADDR		0xfffbc000ul
 
@@ -391,6 +400,10 @@ enum vmcs_field {
 #define ASM_VMX_INVEPT		  ".byte 0x66, 0x0f, 0x38, 0x80, 0x08"
 #define ASM_VMX_INVVPID		  ".byte 0x66, 0x0f, 0x38, 0x81, 0x08"
 
-
+struct vmx_msr_entry {
+	u32 index;
+	u32 reserved;
+	u64 value;
+} __aligned(16);
 
 #endif
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index ea0e8ea..baa579c 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -99,6 +99,20 @@ struct x86_init_iommu {
 };
 
 /**
+ * struct x86_init_pci - platform specific pci init functions
+ * @arch_init:			platform specific pci arch init call
+ * @init:			platform specific pci subsystem init
+ * @init_irq:			platform specific pci irq init
+ * @fixup_irqs:			platform specific pci irq fixup
+ */
+struct x86_init_pci {
+	int (*arch_init)(void);
+	int (*init)(void);
+	void (*init_irq)(void);
+	void (*fixup_irqs)(void);
+};
+
+/**
  * struct x86_init_ops - functions for platform specific setup
  *
  */
@@ -110,6 +124,7 @@ struct x86_init_ops {
 	struct x86_init_paging		paging;
 	struct x86_init_timers		timers;
 	struct x86_init_iommu		iommu;
+	struct x86_init_pci		pci;
 };
 
 /**
@@ -126,6 +141,8 @@ struct x86_cpuinit_ops {
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
  * @is_untracked_pat_range	exclude from PAT logic
+ * @nmi_init			enable NMI on cpus
+ * @i8042_detect		pre-detect if i8042 controller exists
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
@@ -133,6 +150,8 @@ struct x86_platform_ops {
 	int (*set_wallclock)(unsigned long nowtime);
 	void (*iommu_shutdown)(void);
 	bool (*is_untracked_pat_range)(u64 start, u64 end);
+	void (*nmi_init)(void);
+	int (*i8042_detect)(void);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 727acc1..2c4390c 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -27,16 +27,19 @@
 extern unsigned int xstate_size;
 extern u64 pcntxt_mask;
 extern struct xsave_struct *init_xstate_buf;
+extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
 extern void xsave_cntxt_init(void);
 extern void xsave_init(void);
+extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
 extern int init_fpu(struct task_struct *child);
 extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
 			    void __user *fpstate,
 			    struct _fpx_sw_bytes *sw);
 
-static inline int xrstor_checking(struct xsave_struct *fx)
+static inline int fpu_xrstor_checking(struct fpu *fpu)
 {
+	struct xsave_struct *fx = &fpu->state->xsave;
 	int err;
 
 	asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
@@ -108,12 +111,12 @@ static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
 		     :   "memory");
 }
 
-static inline void xsave(struct task_struct *tsk)
+static inline void fpu_xsave(struct fpu *fpu)
 {
 	/* This, however, we can work around by forcing the compiler to select
 	   an addressing mode that doesn't require extended registers. */
 	__asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
-			     : : "D" (&(tsk->thread.xstate->xsave)),
+			     : : "D" (&(fpu->state->xsave)),
 				 "a" (-1), "d"(-1) : "memory");
 }
 #endif
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index d87f09b..e77b220 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -47,8 +47,6 @@ obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
 obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
-obj-$(CONFIG_X86_DS)		+= ds.o
-obj-$(CONFIG_X86_DS_SELFTEST)		+= ds_selftest.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
 obj-y				+= step.o
@@ -87,6 +85,7 @@ obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
+obj-$(CONFIG_APB_TIMER)		+= apb_timer.o
 
 obj-$(CONFIG_K8_NB)		+= k8.o
 obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_rodata.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 036d28a..c05872a 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -31,10 +31,12 @@
 #include <linux/module.h>
 #include <linux/dmi.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 
+#include <asm/pci_x86.h>
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
@@ -49,6 +51,7 @@ EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
 # include <asm/proto.h>
+# include <asm/numa_64.h>
 #endif				/* X86 */
 
 #define BAD_MADT_ENTRY(entry, end) (					    \
@@ -60,7 +63,6 @@ EXPORT_SYMBOL(acpi_disabled);
 int acpi_noirq;				/* skip ACPI IRQ initialization */
 int acpi_pci_disabled;		/* skip ACPI PCI scan and IRQ initialization */
 EXPORT_SYMBOL(acpi_pci_disabled);
-int acpi_ht __initdata = 1;	/* enable HT */
 
 int acpi_lapic;
 int acpi_ioapic;
@@ -91,6 +93,53 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
 
 /*
+ * ISA irqs by default are the first 16 gsis but can be
+ * any gsi as specified by an interrupt source override.
+ */
+static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = {
+	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+};
+
+static unsigned int gsi_to_irq(unsigned int gsi)
+{
+	unsigned int irq = gsi + NR_IRQS_LEGACY;
+	unsigned int i;
+
+	for (i = 0; i < NR_IRQS_LEGACY; i++) {
+		if (isa_irq_to_gsi[i] == gsi) {
+			return i;
+		}
+	}
+
+	/* Provide an identity mapping of gsi == irq
+	 * except on truly weird platforms that have
+	 * non isa irqs in the first 16 gsis.
+	 */
+	if (gsi >= NR_IRQS_LEGACY)
+		irq = gsi;
+	else
+		irq = gsi_top + gsi;
+
+	return irq;
+}
+
+static u32 irq_to_gsi(int irq)
+{
+	unsigned int gsi;
+
+	if (irq < NR_IRQS_LEGACY)
+		gsi = isa_irq_to_gsi[irq];
+	else if (irq < gsi_top)
+		gsi = irq;
+	else if (irq < (gsi_top + NR_IRQS_LEGACY))
+		gsi = irq - gsi_top;
+	else
+		gsi = 0xffffffff;
+
+	return gsi;
+}
+
+/*
  * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
  * to map the target physical address. The problem is that set_fixmap()
  * provides a single page, and it is possible that the page is not
@@ -310,7 +359,7 @@ acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 /*
  * Parse Interrupt Source Override for the ACPI SCI
  */
-static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi)
 {
 	if (trigger == 0)	/* compatible SCI trigger is level */
 		trigger = 3;
@@ -330,7 +379,7 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
 	 * If GSI is < 16, this will update its flags,
 	 * else it will create a new mp_irqs[] entry.
 	 */
-	mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+	mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
 
 	/*
 	 * stash over-ride to indicate we've been here
@@ -354,9 +403,10 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
 	acpi_table_print_madt_entry(header);
 
 	if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
-		acpi_sci_ioapic_setup(intsrc->global_irq,
+		acpi_sci_ioapic_setup(intsrc->source_irq,
 				      intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
-				      (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
+				      (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+				      intsrc->global_irq);
 		return 0;
 	}
 
@@ -445,7 +495,21 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 
 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 {
-	*irq = gsi;
+	*irq = gsi_to_irq(gsi);
+
+#ifdef CONFIG_X86_IO_APIC
+	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+		setup_IO_APIC_irq_extra(gsi);
+#endif
+
+	return 0;
+}
+
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq >= 16)
+		return -1;
+	*gsi = irq_to_gsi(isa_irq);
 	return 0;
 }
 
@@ -473,7 +537,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 		plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
 	}
 #endif
-	acpi_gsi_to_irq(plat_gsi, &irq);
+	irq = gsi_to_irq(plat_gsi);
+
 	return irq;
 }
 
@@ -481,6 +546,26 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
  *  ACPI based hotplug support for CPU
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
+
+static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+	int nid;
+
+	nid = acpi_get_node(handle);
+	if (nid == -1 || !node_online(nid))
+		return;
+#ifdef CONFIG_X86_64
+	apicid_to_node[physid] = nid;
+	numa_set_node(cpu, nid);
+#else /* CONFIG_X86_32 */
+	apicid_2_node[physid] = nid;
+	cpu_to_node_map[cpu] = nid;
+#endif
+
+#endif
+}
 
 static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 {
@@ -539,7 +624,10 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 		goto free_new_map;
 	}
 
+	acpi_processor_set_pdc(handle);
+
 	cpu = cpumask_first(new_map);
+	acpi_map_cpu2node(handle, cpu, physid);
 
 	*pcpu = cpu;
 	retval = 0;
@@ -834,29 +922,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-int __init acpi_probe_gsi(void)
-{
-	int idx;
-	int gsi;
-	int max_gsi = 0;
-
-	if (acpi_disabled)
-		return 0;
-
-	if (!acpi_ioapic)
-		return 0;
-
-	max_gsi = 0;
-	for (idx = 0; idx < nr_ioapics; idx++) {
-		gsi = mp_gsi_routing[idx].gsi_end;
-
-		if (gsi > max_gsi)
-			max_gsi = gsi;
-	}
-
-	return max_gsi + 1;
-}
-
 static void assign_to_mp_irq(struct mpc_intsrc *m,
 				    struct mpc_intsrc *mp_irq)
 {
@@ -914,13 +979,13 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	mp_irq.dstirq = pin;	/* INTIN# */
 
 	save_mp_irq(&mp_irq);
+
+	isa_irq_to_gsi[bus_irq] = gsi;
 }
 
 void __init mp_config_acpi_legacy_irqs(void)
 {
 	int i;
-	int ioapic;
-	unsigned int dstapic;
 	struct mpc_intsrc mp_irq;
 
 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
@@ -941,19 +1006,27 @@ void __init mp_config_acpi_legacy_irqs(void)
 #endif
 
 	/*
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
-	dstapic = mp_ioapics[ioapic].apicid;
-
-	/*
 	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overridden by (MADT) interrupt source override entries.
 	 */
 	for (i = 0; i < 16; i++) {
+		int ioapic, pin;
+		unsigned int dstapic;
 		int idx;
+		u32 gsi;
+
+		/* Locate the gsi that irq i maps to. */
+		if (acpi_isa_irq_to_gsi(i, &gsi))
+			continue;
+
+		/*
+		 * Locate the IOAPIC that manages the ISA IRQ.
+		 */
+		ioapic = mp_find_ioapic(gsi);
+		if (ioapic < 0)
+			continue;
+		pin = mp_find_ioapic_pin(ioapic, gsi);
+		dstapic = mp_ioapics[ioapic].apicid;
 
 		for (idx = 0; idx < mp_irq_entries; idx++) {
 			struct mpc_intsrc *irq = mp_irqs + idx;
@@ -963,7 +1036,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 				break;
 
 			/* Do we already have a mapping for this IOAPIC pin */
-			if (irq->dstapic == dstapic && irq->dstirq == i)
+			if (irq->dstapic == dstapic && irq->dstirq == pin)
 				break;
 		}
 
@@ -978,7 +1051,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 		mp_irq.dstapic = dstapic;
 		mp_irq.irqtype = mp_INT;
 		mp_irq.srcbusirq = i; /* Identity mapped */
-		mp_irq.dstirq = i;
+		mp_irq.dstirq = pin;
 
 		save_mp_irq(&mp_irq);
 	}
@@ -1043,11 +1116,6 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 
 	ioapic_pin = mp_find_ioapic_pin(ioapic, gsi);
 
-#ifdef CONFIG_X86_32
-	if (ioapic_renumber_irq)
-		gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
-
 	if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
 		       "%d-%d\n", mp_ioapics[ioapic].apicid,
@@ -1061,7 +1129,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
 			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
 			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	io_apic_set_pci_routing(dev, gsi, &irq_attr);
+	io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
 
 	return gsi;
 }
@@ -1121,7 +1189,8 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	 * pretend we got one so we can set the SCI flags.
 	 */
 	if (!acpi_sci_override_gsi)
-		acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
+		acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0,
+				      acpi_gbl_FADT.sci_interrupt);
 
 	/* Fill in identity legacy mappings where no override */
 	mp_config_acpi_legacy_irqs();
@@ -1185,9 +1254,6 @@ static void __init acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_BIGSMP
-			generic_bigsmp_probe();
-#endif
 			/*
 			 * Parse MADT IO-APIC entries
 			 */
@@ -1197,8 +1263,6 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-				if (apic->setup_apic_routing)
-					apic->setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {
@@ -1269,23 +1333,6 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 }
 
 /*
- * Limit ACPI to CPU enumeration for HT
- */
-static int __init force_acpi_ht(const struct dmi_system_id *d)
-{
-	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
-		       d->ident);
-		disable_acpi();
-		acpi_ht = 1;
-	} else {
-		printk(KERN_NOTICE
-		       "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
-	}
-	return 0;
-}
-
-/*
  * Force ignoring BIOS IRQ0 pin2 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
@@ -1321,90 +1368,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 },
 
 	/*
-	 * Boxes that need acpi=ht
-	 */
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "FSC Primergy T850",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "HP VISUALIZE NT Workstation",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "Compaq Workstation W8000",
-	 .matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS P2B-DS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS CUR-DLS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ABIT i440BX-W83977",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
-		     DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM Bladecenter",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eServer xSeries 360",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 330",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "IBM eserver xSeries 440",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
-		     },
-	 },
-
-	/*
 	 * Boxes that need ACPI PCI IRQ routing disabled
 	 */
 	{
@@ -1537,9 +1500,8 @@ void __init acpi_boot_table_init(void)
 
 	/*
 	 * If acpi_disabled, bail out
-	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
-	if (acpi_disabled && !acpi_ht)
+	if (acpi_disabled)
 		return; 
 
 	/*
@@ -1570,9 +1532,8 @@ int __init early_acpi_boot_init(void)
 {
 	/*
 	 * If acpi_disabled, bail out
-	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
-	if (acpi_disabled && !acpi_ht)
+	if (acpi_disabled)
 		return 1;
 
 	/*
@@ -1590,9 +1551,8 @@ int __init acpi_boot_init(void)
 
 	/*
 	 * If acpi_disabled, bail out
-	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
-	if (acpi_disabled && !acpi_ht)
+	if (acpi_disabled)
 		return 1;
 
 	acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
@@ -1609,6 +1569,9 @@ int __init acpi_boot_init(void)
 
 	acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
 
+	if (!acpi_noirq)
+		x86_init.pci.init = pci_acpi_init;
+
 	return 0;
 }
 
@@ -1624,19 +1587,12 @@ static int __init parse_acpi(char *arg)
 	/* acpi=force to over-ride black-list */
 	else if (strcmp(arg, "force") == 0) {
 		acpi_force = 1;
-		acpi_ht = 1;
 		acpi_disabled = 0;
 	}
 	/* acpi=strict disables out-of-spec workarounds */
 	else if (strcmp(arg, "strict") == 0) {
 		acpi_strict = 1;
 	}
-	/* Limit ACPI just to boot-time to enable HT */
-	else if (strcmp(arg, "ht") == 0) {
-		if (!acpi_force)
-			disable_acpi();
-		acpi_ht = 1;
-	}
 	/* acpi=rsdt use RSDT instead of XSDT */
 	else if (strcmp(arg, "rsdt") == 0) {
 		acpi_rsdt_forced = 1;
@@ -1644,6 +1600,10 @@ static int __init parse_acpi(char *arg)
 	/* "acpi=noirq" disables ACPI interrupt routing */
 	else if (strcmp(arg, "noirq") == 0) {
 		acpi_noirq_set();
+	}
+	/* "acpi=copy_dsdt" copys DSDT */
+	else if (strcmp(arg, "copy_dsdt") == 0) {
+		acpi_gbl_copy_dsdt_locally = 1;
 	} else {
 		/* Core will printk when we return error. */
 		return -EINVAL;
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5..fb7a5f0 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 		percpu_entry->states[cx->index].eax = cx->address;
 		percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
 	}
+
+	/*
+	 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+	 * then we should skip checking BM_STS for this C-state.
+	 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+	 */
+	if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+		cx->bm_sts_skip = 1;
+
 	return retval;
 }
 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index f996103..fcc3c61f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,13 +157,16 @@ static int __init acpi_sleep_setup(char *str)
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
 			acpi_no_s4_hw_signature();
-		if (strncmp(str, "s4_nonvs", 8) == 0)
-			acpi_s4_no_nvs();
+		if (strncmp(str, "s4_nonvs", 8) == 0) {
+			pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+					"please use acpi_sleep=nonvs instead");
+			acpi_nvs_nosave();
+		}
 #endif
+		if (strncmp(str, "nonvs", 5) == 0)
+			acpi_nvs_nosave();
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
-		if (strncmp(str, "sci_force_enable", 16) == 0)
-			acpi_set_sci_en_on_resume();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index de7353c..7023773 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -7,6 +7,8 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/memory.h>
+#include <linux/stop_machine.h>
+#include <linux/slab.h>
 #include <asm/alternative.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
@@ -192,7 +194,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len)
 }
 
 extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
-extern u8 *__smp_locks[], *__smp_locks_end[];
+extern s32 __smp_locks[], __smp_locks_end[];
 static void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 /* Replace instructions with better alternatives for this CPU type.
@@ -205,7 +207,7 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 					 struct alt_instr *end)
 {
 	struct alt_instr *a;
-	char insnbuf[MAX_PATCH_LEN];
+	u8 insnbuf[MAX_PATCH_LEN];
 
 	DPRINTK("%s: alt table %p -> %p\n", __func__, start, end);
 	for (a = start; a < end; a++) {
@@ -223,6 +225,8 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 		}
 #endif
 		memcpy(insnbuf, a->replacement, a->replacementlen);
+		if (*insnbuf == 0xe8 && a->replacementlen == 5)
+		    *(s32 *)(insnbuf + 1) += a->replacement - a->instr;
 		add_nops(insnbuf + a->replacementlen,
 			 a->instrlen - a->replacementlen);
 		text_poke_early(instr, insnbuf, a->instrlen);
@@ -231,37 +235,41 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 
 #ifdef CONFIG_SMP
 
-static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end)
+static void alternatives_smp_lock(const s32 *start, const s32 *end,
+				  u8 *text, u8 *text_end)
 {
-	u8 **ptr;
+	const s32 *poff;
 
 	mutex_lock(&text_mutex);
-	for (ptr = start; ptr < end; ptr++) {
-		if (*ptr < text)
-			continue;
-		if (*ptr > text_end)
+	for (poff = start; poff < end; poff++) {
+		u8 *ptr = (u8 *)poff + *poff;
+
+		if (!*poff || ptr < text || ptr >= text_end)
 			continue;
 		/* turn DS segment override prefix into lock prefix */
-		text_poke(*ptr, ((unsigned char []){0xf0}), 1);
+		if (*ptr == 0x3e)
+			text_poke(ptr, ((unsigned char []){0xf0}), 1);
 	};
 	mutex_unlock(&text_mutex);
 }
 
-static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end)
+static void alternatives_smp_unlock(const s32 *start, const s32 *end,
+				    u8 *text, u8 *text_end)
 {
-	u8 **ptr;
+	const s32 *poff;
 
 	if (noreplace_smp)
 		return;
 
 	mutex_lock(&text_mutex);
-	for (ptr = start; ptr < end; ptr++) {
-		if (*ptr < text)
-			continue;
-		if (*ptr > text_end)
+	for (poff = start; poff < end; poff++) {
+		u8 *ptr = (u8 *)poff + *poff;
+
+		if (!*poff || ptr < text || ptr >= text_end)
 			continue;
 		/* turn lock prefix into DS segment override prefix */
-		text_poke(*ptr, ((unsigned char []){0x3E}), 1);
+		if (*ptr == 0xf0)
+			text_poke(ptr, ((unsigned char []){0x3E}), 1);
 	};
 	mutex_unlock(&text_mutex);
 }
@@ -272,8 +280,8 @@ struct smp_alt_module {
 	char		*name;
 
 	/* ptrs to lock prefixes */
-	u8		**locks;
-	u8		**locks_end;
+	const s32	*locks;
+	const s32	*locks_end;
 
 	/* .text segment, needed to avoid patching init code ;) */
 	u8		*text;
@@ -390,6 +398,27 @@ void alternatives_smp_switch(int smp)
 	mutex_unlock(&smp_alt);
 }
 
+/* Return 1 if the address range is reserved for smp-alternatives */
+int alternatives_text_reserved(void *start, void *end)
+{
+	struct smp_alt_module *mod;
+	const s32 *poff;
+	u8 *text_start = start;
+	u8 *text_end = end;
+
+	list_for_each_entry(mod, &smp_alt_modules, next) {
+		if (mod->text > text_end || mod->text_end < text_start)
+			continue;
+		for (poff = mod->locks; poff < mod->locks_end; poff++) {
+			const u8 *ptr = (const u8 *)poff + *poff;
+
+			if (text_start <= ptr && text_end > ptr)
+				return 1;
+		}
+	}
+
+	return 0;
+}
 #endif
 
 #ifdef CONFIG_PARAVIRT
@@ -552,3 +581,62 @@ void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
 	local_irq_restore(flags);
 	return addr;
 }
+
+/*
+ * Cross-modifying kernel text with stop_machine().
+ * This code originally comes from immediate value.
+ */
+static atomic_t stop_machine_first;
+static int wrote_text;
+
+struct text_poke_params {
+	void *addr;
+	const void *opcode;
+	size_t len;
+};
+
+static int __kprobes stop_machine_text_poke(void *data)
+{
+	struct text_poke_params *tpp = data;
+
+	if (atomic_dec_and_test(&stop_machine_first)) {
+		text_poke(tpp->addr, tpp->opcode, tpp->len);
+		smp_wmb();	/* Make sure other cpus see that this has run */
+		wrote_text = 1;
+	} else {
+		while (!wrote_text)
+			cpu_relax();
+		smp_mb();	/* Load wrote_text before following execution */
+	}
+
+	flush_icache_range((unsigned long)tpp->addr,
+			   (unsigned long)tpp->addr + tpp->len);
+	return 0;
+}
+
+/**
+ * text_poke_smp - Update instructions on a live kernel on SMP
+ * @addr: address to modify
+ * @opcode: source of the copy
+ * @len: length to copy
+ *
+ * Modify multi-byte instruction by using stop_machine() on SMP. This allows
+ * user to poke/set multi-byte text on SMP. Only non-NMI/MCE code modifying
+ * should be allowed, since stop_machine() does _not_ protect code against
+ * NMI and MCE.
+ *
+ * Note: Must be called under get_online_cpus() and text_mutex.
+ */
+void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
+{
+	struct text_poke_params tpp;
+
+	tpp.addr = addr;
+	tpp.opcode = opcode;
+	tpp.len = len;
+	atomic_set(&stop_machine_first, 1);
+	wrote_text = 0;
+	stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+	return addr;
+}
+
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 23824fe..0d20286 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -18,8 +18,8 @@
  */
 
 #include <linux/pci.h>
-#include <linux/gfp.h>
 #include <linux/bitmap.h>
+#include <linux/slab.h>
 #include <linux/debugfs.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
@@ -118,7 +118,7 @@ static bool check_device(struct device *dev)
 		return false;
 
 	/* No device or no PCI device */
-	if (!dev || dev->bus != &pci_bus_type)
+	if (dev->bus != &pci_bus_type)
 		return false;
 
 	devid = get_device_id(dev);
@@ -392,6 +392,7 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 	u32 tail, head;
 	u8 *target;
 
+	WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
 	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
 	target = iommu->cmd_buf + tail;
 	memcpy_toio(target, cmd, sizeof(*cmd));
@@ -730,18 +731,22 @@ static bool increase_address_space(struct protection_domain *domain,
 
 static u64 *alloc_pte(struct protection_domain *domain,
 		      unsigned long address,
-		      int end_lvl,
+		      unsigned long page_size,
 		      u64 **pte_page,
 		      gfp_t gfp)
 {
+	int level, end_lvl;
 	u64 *pte, *page;
-	int level;
+
+	BUG_ON(!is_power_of_2(page_size));
 
 	while (address > PM_LEVEL_SIZE(domain->mode))
 		increase_address_space(domain, gfp);
 
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+	level   = domain->mode - 1;
+	pte     = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+	address = PAGE_SIZE_ALIGN(address, page_size);
+	end_lvl = PAGE_SIZE_LEVEL(page_size);
 
 	while (level > end_lvl) {
 		if (!IOMMU_PTE_PRESENT(*pte)) {
@@ -751,6 +756,10 @@ static u64 *alloc_pte(struct protection_domain *domain,
 			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
 		}
 
+		/* No level skipping support yet */
+		if (PM_PTE_LEVEL(*pte) != level)
+			return NULL;
+
 		level -= 1;
 
 		pte = IOMMU_PTE_PAGE(*pte);
@@ -768,28 +777,47 @@ static u64 *alloc_pte(struct protection_domain *domain,
  * This function checks if there is a PTE for a given dma address. If
  * there is one, it returns the pointer to it.
  */
-static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address, int map_size)
+static u64 *fetch_pte(struct protection_domain *domain, unsigned long address)
 {
 	int level;
 	u64 *pte;
 
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+	if (address > PM_LEVEL_SIZE(domain->mode))
+		return NULL;
+
+	level   =  domain->mode - 1;
+	pte     = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+
+	while (level > 0) {
 
-	while (level > map_size) {
+		/* Not Present */
 		if (!IOMMU_PTE_PRESENT(*pte))
 			return NULL;
 
+		/* Large PTE */
+		if (PM_PTE_LEVEL(*pte) == 0x07) {
+			unsigned long pte_mask, __pte;
+
+			/*
+			 * If we have a series of large PTEs, make
+			 * sure to return a pointer to the first one.
+			 */
+			pte_mask = PTE_PAGE_SIZE(*pte);
+			pte_mask = ~((PAGE_SIZE_PTE_COUNT(pte_mask) << 3) - 1);
+			__pte    = ((unsigned long)pte) & pte_mask;
+
+			return (u64 *)__pte;
+		}
+
+		/* No level skipping support yet */
+		if (PM_PTE_LEVEL(*pte) != level)
+			return NULL;
+
 		level -= 1;
 
+		/* Walk to the next level */
 		pte = IOMMU_PTE_PAGE(*pte);
 		pte = &pte[PM_LEVEL_INDEX(level, address)];
-
-		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
-			pte = NULL;
-			break;
-		}
 	}
 
 	return pte;
@@ -806,44 +834,84 @@ static int iommu_map_page(struct protection_domain *dom,
 			  unsigned long bus_addr,
 			  unsigned long phys_addr,
 			  int prot,
-			  int map_size)
+			  unsigned long page_size)
 {
 	u64 __pte, *pte;
-
-	bus_addr  = PAGE_ALIGN(bus_addr);
-	phys_addr = PAGE_ALIGN(phys_addr);
-
-	BUG_ON(!PM_ALIGNED(map_size, bus_addr));
-	BUG_ON(!PM_ALIGNED(map_size, phys_addr));
+	int i, count;
 
 	if (!(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
-	pte = alloc_pte(dom, bus_addr, map_size, NULL, GFP_KERNEL);
+	bus_addr  = PAGE_ALIGN(bus_addr);
+	phys_addr = PAGE_ALIGN(phys_addr);
+	count     = PAGE_SIZE_PTE_COUNT(page_size);
+	pte       = alloc_pte(dom, bus_addr, page_size, NULL, GFP_KERNEL);
 
-	if (IOMMU_PTE_PRESENT(*pte))
-		return -EBUSY;
+	for (i = 0; i < count; ++i)
+		if (IOMMU_PTE_PRESENT(pte[i]))
+			return -EBUSY;
+
+	if (page_size > PAGE_SIZE) {
+		__pte = PAGE_SIZE_PTE(phys_addr, page_size);
+		__pte |= PM_LEVEL_ENC(7) | IOMMU_PTE_P | IOMMU_PTE_FC;
+	} else
+		__pte = phys_addr | IOMMU_PTE_P | IOMMU_PTE_FC;
 
-	__pte = phys_addr | IOMMU_PTE_P;
 	if (prot & IOMMU_PROT_IR)
 		__pte |= IOMMU_PTE_IR;
 	if (prot & IOMMU_PROT_IW)
 		__pte |= IOMMU_PTE_IW;
 
-	*pte = __pte;
+	for (i = 0; i < count; ++i)
+		pte[i] = __pte;
 
 	update_domain(dom);
 
 	return 0;
 }
 
-static void iommu_unmap_page(struct protection_domain *dom,
-			     unsigned long bus_addr, int map_size)
+static unsigned long iommu_unmap_page(struct protection_domain *dom,
+				      unsigned long bus_addr,
+				      unsigned long page_size)
 {
-	u64 *pte = fetch_pte(dom, bus_addr, map_size);
+	unsigned long long unmap_size, unmapped;
+	u64 *pte;
+
+	BUG_ON(!is_power_of_2(page_size));
+
+	unmapped = 0;
+
+	while (unmapped < page_size) {
 
-	if (pte)
-		*pte = 0;
+		pte = fetch_pte(dom, bus_addr);
+
+		if (!pte) {
+			/*
+			 * No PTE for this address
+			 * move forward in 4kb steps
+			 */
+			unmap_size = PAGE_SIZE;
+		} else if (PM_PTE_LEVEL(*pte) == 0) {
+			/* 4kb PTE found for this address */
+			unmap_size = PAGE_SIZE;
+			*pte       = 0ULL;
+		} else {
+			int count, i;
+
+			/* Large PTE found which maps this address */
+			unmap_size = PTE_PAGE_SIZE(*pte);
+			count      = PAGE_SIZE_PTE_COUNT(unmap_size);
+			for (i = 0; i < count; i++)
+				pte[i] = 0ULL;
+		}
+
+		bus_addr  = (bus_addr & ~(unmap_size - 1)) + unmap_size;
+		unmapped += unmap_size;
+	}
+
+	BUG_ON(!is_power_of_2(unmapped));
+
+	return unmapped;
 }
 
 /*
@@ -877,7 +945,7 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 	for (addr = e->address_start; addr < e->address_end;
 	     addr += PAGE_SIZE) {
 		ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot,
-				     PM_MAP_4k);
+				     PAGE_SIZE);
 		if (ret)
 			return ret;
 		/*
@@ -980,7 +1048,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
 {
 	int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
 	struct amd_iommu *iommu;
-	int i;
+	unsigned long i;
 
 #ifdef CONFIG_IOMMU_STRESS
 	populate = false;
@@ -1005,7 +1073,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
 		u64 *pte, *pte_page;
 
 		for (i = 0; i < num_ptes; ++i) {
-			pte = alloc_pte(&dma_dom->domain, address, PM_MAP_4k,
+			pte = alloc_pte(&dma_dom->domain, address, PAGE_SIZE,
 					&pte_page, gfp);
 			if (!pte)
 				goto out_free;
@@ -1041,7 +1109,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
 	for (i = dma_dom->aperture[index]->offset;
 	     i < dma_dom->aperture_size;
 	     i += PAGE_SIZE) {
-		u64 *pte = fetch_pte(&dma_dom->domain, i, PM_MAP_4k);
+		u64 *pte = fetch_pte(&dma_dom->domain, i);
 		if (!pte || !IOMMU_PTE_PRESENT(*pte))
 			continue;
 
@@ -1419,6 +1487,7 @@ static int __attach_device(struct device *dev,
 			   struct protection_domain *domain)
 {
 	struct iommu_dev_data *dev_data, *alias_data;
+	int ret;
 
 	dev_data   = get_dev_data(dev);
 	alias_data = get_dev_data(dev_data->alias);
@@ -1430,13 +1499,14 @@ static int __attach_device(struct device *dev,
 	spin_lock(&domain->lock);
 
 	/* Some sanity checks */
+	ret = -EBUSY;
 	if (alias_data->domain != NULL &&
 	    alias_data->domain != domain)
-		return -EBUSY;
+		goto out_unlock;
 
 	if (dev_data->domain != NULL &&
 	    dev_data->domain != domain)
-		return -EBUSY;
+		goto out_unlock;
 
 	/* Do real assignment */
 	if (dev_data->alias != dev) {
@@ -1452,10 +1522,14 @@ static int __attach_device(struct device *dev,
 
 	atomic_inc(&dev_data->bind);
 
+	ret = 0;
+
+out_unlock:
+
 	/* ready */
 	spin_unlock(&domain->lock);
 
-	return 0;
+	return ret;
 }
 
 /*
@@ -1489,11 +1563,14 @@ static void __detach_device(struct device *dev)
 {
 	struct iommu_dev_data *dev_data = get_dev_data(dev);
 	struct iommu_dev_data *alias_data;
+	struct protection_domain *domain;
 	unsigned long flags;
 
 	BUG_ON(!dev_data->domain);
 
-	spin_lock_irqsave(&dev_data->domain->lock, flags);
+	domain = dev_data->domain;
+
+	spin_lock_irqsave(&domain->lock, flags);
 
 	if (dev_data->alias != dev) {
 		alias_data = get_dev_data(dev_data->alias);
@@ -1504,13 +1581,15 @@ static void __detach_device(struct device *dev)
 	if (atomic_dec_and_test(&dev_data->bind))
 		do_detach(dev);
 
-	spin_unlock_irqrestore(&dev_data->domain->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	/*
 	 * If we run in passthrough mode the device must be assigned to the
-	 * passthrough domain if it is detached from any other domain
+	 * passthrough domain if it is detached from any other domain.
+	 * Make sure we can deassign from the pt_domain itself.
 	 */
-	if (iommu_pass_through && dev_data->domain == NULL)
+	if (iommu_pass_through &&
+	    (dev_data->domain == NULL && domain != pt_domain))
 		__attach_device(dev, pt_domain);
 }
 
@@ -1706,7 +1785,7 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 
 	pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
 	if (!pte) {
-		pte = alloc_pte(&dom->domain, address, PM_MAP_4k, &pte_page,
+		pte = alloc_pte(&dom->domain, address, PAGE_SIZE, &pte_page,
 				GFP_ATOMIC);
 		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
 	} else
@@ -2181,7 +2260,7 @@ static void prealloc_protection_domains(void)
 	struct dma_ops_domain *dma_dom;
 	u16 devid;
 
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 
 		/* Do we handle this device? */
 		if (!check_device(&dev->dev))
@@ -2218,6 +2297,12 @@ static struct dma_map_ops amd_iommu_dma_ops = {
 /*
  * The function which clues the AMD IOMMU driver into dma_ops.
  */
+
+void __init amd_iommu_init_api(void)
+{
+	register_iommu(&amd_iommu_ops);
+}
+
 int __init amd_iommu_init_dma_ops(void)
 {
 	struct amd_iommu *iommu;
@@ -2245,16 +2330,10 @@ int __init amd_iommu_init_dma_ops(void)
 
 	iommu_detected = 1;
 	swiotlb = 0;
-#ifdef CONFIG_GART_IOMMU
-	gart_iommu_aperture_disabled = 1;
-	gart_iommu_aperture = 0;
-#endif
 
 	/* Make the driver finally visible to the drivers */
 	dma_ops = &amd_iommu_dma_ops;
 
-	register_iommu(&amd_iommu_ops);
-
 	amd_iommu_stats_init();
 
 	return 0;
@@ -2289,7 +2368,7 @@ static void cleanup_domain(struct protection_domain *domain)
 	list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
 		struct device *dev = dev_data->dev;
 
-		do_detach(dev);
+		__detach_device(dev);
 		atomic_set(&dev_data->bind, 0);
 	}
 
@@ -2318,6 +2397,7 @@ static struct protection_domain *protection_domain_alloc(void)
 		return NULL;
 
 	spin_lock_init(&domain->lock);
+	mutex_init(&domain->api_lock);
 	domain->id = domain_id_alloc();
 	if (!domain->id)
 		goto out_err;
@@ -2370,9 +2450,7 @@ static void amd_iommu_domain_destroy(struct iommu_domain *dom)
 
 	free_pagetable(domain);
 
-	domain_id_free(domain->id);
-
-	kfree(domain);
+	protection_domain_free(domain);
 
 	dom->priv = NULL;
 }
@@ -2430,12 +2508,11 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 	return ret;
 }
 
-static int amd_iommu_map_range(struct iommu_domain *dom,
-			       unsigned long iova, phys_addr_t paddr,
-			       size_t size, int iommu_prot)
+static int amd_iommu_map(struct iommu_domain *dom, unsigned long iova,
+			 phys_addr_t paddr, int gfp_order, int iommu_prot)
 {
+	unsigned long page_size = 0x1000UL << gfp_order;
 	struct protection_domain *domain = dom->priv;
-	unsigned long i,  npages = iommu_num_pages(paddr, size, PAGE_SIZE);
 	int prot = 0;
 	int ret;
 
@@ -2444,53 +2521,50 @@ static int amd_iommu_map_range(struct iommu_domain *dom,
 	if (iommu_prot & IOMMU_WRITE)
 		prot |= IOMMU_PROT_IW;
 
-	iova  &= PAGE_MASK;
-	paddr &= PAGE_MASK;
-
-	for (i = 0; i < npages; ++i) {
-		ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
-		if (ret)
-			return ret;
-
-		iova  += PAGE_SIZE;
-		paddr += PAGE_SIZE;
-	}
+	mutex_lock(&domain->api_lock);
+	ret = iommu_map_page(domain, iova, paddr, prot, page_size);
+	mutex_unlock(&domain->api_lock);
 
-	return 0;
+	return ret;
 }
 
-static void amd_iommu_unmap_range(struct iommu_domain *dom,
-				  unsigned long iova, size_t size)
+static int amd_iommu_unmap(struct iommu_domain *dom, unsigned long iova,
+			   int gfp_order)
 {
-
 	struct protection_domain *domain = dom->priv;
-	unsigned long i,  npages = iommu_num_pages(iova, size, PAGE_SIZE);
+	unsigned long page_size, unmap_size;
 
-	iova  &= PAGE_MASK;
+	page_size  = 0x1000UL << gfp_order;
 
-	for (i = 0; i < npages; ++i) {
-		iommu_unmap_page(domain, iova, PM_MAP_4k);
-		iova  += PAGE_SIZE;
-	}
+	mutex_lock(&domain->api_lock);
+	unmap_size = iommu_unmap_page(domain, iova, page_size);
+	mutex_unlock(&domain->api_lock);
 
 	iommu_flush_tlb_pde(domain);
+
+	return get_order(unmap_size);
 }
 
 static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 					  unsigned long iova)
 {
 	struct protection_domain *domain = dom->priv;
-	unsigned long offset = iova & ~PAGE_MASK;
+	unsigned long offset_mask;
 	phys_addr_t paddr;
-	u64 *pte;
+	u64 *pte, __pte;
 
-	pte = fetch_pte(domain, iova, PM_MAP_4k);
+	pte = fetch_pte(domain, iova);
 
 	if (!pte || !IOMMU_PTE_PRESENT(*pte))
 		return 0;
 
-	paddr  = *pte & IOMMU_PAGE_MASK;
-	paddr |= offset;
+	if (PM_PTE_LEVEL(*pte) == 0)
+		offset_mask = PAGE_SIZE - 1;
+	else
+		offset_mask = PTE_PAGE_SIZE(*pte) - 1;
+
+	__pte = *pte & PM_ADDR_MASK;
+	paddr = (__pte & ~offset_mask) | (iova & offset_mask);
 
 	return paddr;
 }
@@ -2506,8 +2580,8 @@ static struct iommu_ops amd_iommu_ops = {
 	.domain_destroy = amd_iommu_domain_destroy,
 	.attach_dev = amd_iommu_attach_device,
 	.detach_dev = amd_iommu_detach_device,
-	.map = amd_iommu_map_range,
-	.unmap = amd_iommu_unmap_range,
+	.map = amd_iommu_map,
+	.unmap = amd_iommu_unmap,
 	.iova_to_phys = amd_iommu_iova_to_phys,
 	.domain_has_cap = amd_iommu_domain_has_cap,
 };
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index fb490ce..3cc63e2 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -19,8 +19,8 @@
 
 #include <linux/pci.h>
 #include <linux/acpi.h>
-#include <linux/gfp.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/msi.h>
@@ -120,6 +120,7 @@ struct ivmd_header {
 bool amd_iommu_dump;
 
 static int __initdata amd_iommu_detected;
+static bool __initdata amd_iommu_disabled;
 
 u16 amd_iommu_last_bdf;			/* largest PCI device id we have
 					   to handle */
@@ -138,9 +139,9 @@ int amd_iommus_present;
 bool amd_iommu_np_cache __read_mostly;
 
 /*
- * Set to true if ACPI table parsing and hardware intialization went properly
+ * The ACPI table parsing functions set this variable on an error
  */
-static bool amd_iommu_initialized;
+static int __initdata amd_iommu_init_err;
 
 /*
  * List of protection domains - used during resume
@@ -286,8 +287,12 @@ static u8 * __init iommu_map_mmio_space(u64 address)
 {
 	u8 *ret;
 
-	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
+	if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu")) {
+		pr_err("AMD-Vi: Can not reserve memory region %llx for mmio\n",
+			address);
+		pr_err("AMD-Vi: This is a BIOS bug. Please contact your hardware vendor\n");
 		return NULL;
+	}
 
 	ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
 	if (ret != NULL)
@@ -391,9 +396,11 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table)
 	 */
 	for (i = 0; i < table->length; ++i)
 		checksum += p[i];
-	if (checksum != 0)
+	if (checksum != 0) {
 		/* ACPI table corrupt */
-		return -ENODEV;
+		amd_iommu_init_err = -ENODEV;
+		return 0;
+	}
 
 	p += IVRS_HEADER_LENGTH;
 
@@ -436,7 +443,7 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 	if (cmd_buf == NULL)
 		return NULL;
 
-	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
+	iommu->cmd_buf_size = CMD_BUFFER_SIZE | CMD_BUFFER_UNINITIALIZED;
 
 	return cmd_buf;
 }
@@ -472,12 +479,13 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)
 		    &entry, sizeof(entry));
 
 	amd_iommu_reset_cmd_buffer(iommu);
+	iommu->cmd_buf_size &= ~(CMD_BUFFER_UNINITIALIZED);
 }
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
 {
 	free_pages((unsigned long)iommu->cmd_buf,
-		   get_order(iommu->cmd_buf_size));
+		   get_order(iommu->cmd_buf_size & ~(CMD_BUFFER_UNINITIALIZED)));
 }
 
 /* allocates the memory where the IOMMU will log its events to */
@@ -920,11 +928,16 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 				    h->mmio_phys);
 
 			iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
-			if (iommu == NULL)
-				return -ENOMEM;
+			if (iommu == NULL) {
+				amd_iommu_init_err = -ENOMEM;
+				return 0;
+			}
+
 			ret = init_iommu_one(iommu, h);
-			if (ret)
-				return ret;
+			if (ret) {
+				amd_iommu_init_err = ret;
+				return 0;
+			}
 			break;
 		default:
 			break;
@@ -934,8 +947,6 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	}
 	WARN_ON(p != end);
 
-	amd_iommu_initialized = true;
-
 	return 0;
 }
 
@@ -1211,6 +1222,10 @@ static int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
 		return -ENODEV;
 
+	ret = amd_iommu_init_err;
+	if (ret)
+		goto out;
+
 	dev_table_size     = tbl_size(DEV_TABLE_ENTRY_SIZE);
 	alias_table_size   = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
 	rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
@@ -1270,12 +1285,19 @@ static int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", init_iommu_all) != 0)
 		goto free;
 
-	if (!amd_iommu_initialized)
+	if (amd_iommu_init_err) {
+		ret = amd_iommu_init_err;
 		goto free;
+	}
 
 	if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
 		goto free;
 
+	if (amd_iommu_init_err) {
+		ret = amd_iommu_init_err;
+		goto free;
+	}
+
 	ret = sysdev_class_register(&amd_iommu_sysdev_class);
 	if (ret)
 		goto free;
@@ -1288,16 +1310,19 @@ static int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
+	enable_iommus();
+
 	if (iommu_pass_through)
 		ret = amd_iommu_init_passthrough();
 	else
 		ret = amd_iommu_init_dma_ops();
+
 	if (ret)
-		goto free;
+		goto free_disable;
 
-	amd_iommu_init_notifier();
+	amd_iommu_init_api();
 
-	enable_iommus();
+	amd_iommu_init_notifier();
 
 	if (iommu_pass_through)
 		goto out;
@@ -1311,8 +1336,10 @@ static int __init amd_iommu_init(void)
 out:
 	return ret;
 
-free:
+free_disable:
+	disable_iommus();
 
+free:
 	amd_iommu_uninit_devices();
 
 	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
@@ -1331,6 +1358,15 @@ free:
 
 	free_unity_maps();
 
+#ifdef CONFIG_GART_IOMMU
+	/*
+	 * We failed to initialize the AMD IOMMU - try fallback to GART
+	 * if possible.
+	 */
+	gart_iommu_init();
+
+#endif
+
 	goto out;
 }
 
@@ -1351,6 +1387,9 @@ void __init amd_iommu_detect(void)
 	if (no_iommu || (iommu_detected && !gart_iommu_aperture))
 		return;
 
+	if (amd_iommu_disabled)
+		return;
+
 	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
 		iommu_detected = 1;
 		amd_iommu_detected = 1;
@@ -1380,6 +1419,8 @@ static int __init parse_amd_iommu_options(char *str)
 	for (; *str; ++str) {
 		if (strncmp(str, "fullflush", 9) == 0)
 			amd_iommu_unmap_flush = true;
+		if (strncmp(str, "off", 3) == 0)
+			amd_iommu_disabled = true;
 	}
 
 	return 1;
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
new file mode 100644
index 0000000..a353475
--- /dev/null
+++ b/arch/x86/kernel/apb_timer.c
@@ -0,0 +1,785 @@
+/*
+ * apb_timer.c: Driver for Langwell APB timers
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * Langwell is the south complex of Intel Moorestown MID platform. There are
+ * eight external timers in total that can be used by the operating system.
+ * The timer information, such as frequency and addresses, is provided to the
+ * OS via SFI tables.
+ * Timer interrupts are routed via FW/HW emulated IOAPIC independently via
+ * individual redirection table entries (RTE).
+ * Unlike HPET, there is no master counter, therefore one of the timers are
+ * used as clocksource. The overall allocation looks like:
+ *  - timer 0 - NR_CPUs for per cpu timer
+ *  - one timer for clocksource
+ *  - one timer for watchdog driver.
+ * It is also worth notice that APB timer does not support true one-shot mode,
+ * free-running mode will be used here to emulate one-shot mode.
+ * APB timer can also be used as broadcast timer along with per cpu local APIC
+ * timer, but by default APB timer has higher rating than local APIC timers.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/pci.h>
+#include <linux/sfi.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/irq.h>
+
+#include <asm/fixmap.h>
+#include <asm/apb_timer.h>
+
+#define APBT_MASK			CLOCKSOURCE_MASK(32)
+#define APBT_SHIFT			22
+#define APBT_CLOCKEVENT_RATING		150
+#define APBT_CLOCKSOURCE_RATING		250
+#define APBT_MIN_DELTA_USEC		200
+
+#define EVT_TO_APBT_DEV(evt) container_of(evt, struct apbt_dev, evt)
+#define APBT_CLOCKEVENT0_NUM   (0)
+#define APBT_CLOCKEVENT1_NUM   (1)
+#define APBT_CLOCKSOURCE_NUM   (2)
+
+static unsigned long apbt_address;
+static int apb_timer_block_enabled;
+static void __iomem *apbt_virt_address;
+static int phy_cs_timer_id;
+
+/*
+ * Common DW APB timer info
+ */
+static uint64_t apbt_freq;
+
+static void apbt_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt);
+static int apbt_next_event(unsigned long delta,
+			   struct clock_event_device *evt);
+static cycle_t apbt_read_clocksource(struct clocksource *cs);
+static void apbt_restart_clocksource(struct clocksource *cs);
+
+struct apbt_dev {
+	struct clock_event_device evt;
+	unsigned int num;
+	int cpu;
+	unsigned int irq;
+	unsigned int tick;
+	unsigned int count;
+	unsigned int flags;
+	char name[10];
+};
+
+int disable_apbt_percpu __cpuinitdata;
+
+static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
+
+#ifdef CONFIG_SMP
+static unsigned int apbt_num_timers_used;
+static struct apbt_dev *apbt_devs;
+#endif
+
+static	inline unsigned long apbt_readl_reg(unsigned long a)
+{
+	return readl(apbt_virt_address + a);
+}
+
+static inline void apbt_writel_reg(unsigned long d, unsigned long a)
+{
+	writel(d, apbt_virt_address + a);
+}
+
+static inline unsigned long apbt_readl(int n, unsigned long a)
+{
+	return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE);
+}
+
+static inline void apbt_writel(int n, unsigned long d, unsigned long a)
+{
+	writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE);
+}
+
+static inline void apbt_set_mapping(void)
+{
+	struct sfi_timer_table_entry *mtmr;
+
+	if (apbt_virt_address) {
+		pr_debug("APBT base already mapped\n");
+		return;
+	}
+	mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
+	if (mtmr == NULL) {
+		printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
+		       APBT_CLOCKEVENT0_NUM);
+		return;
+	}
+	apbt_address = (unsigned long)mtmr->phys_addr;
+	if (!apbt_address) {
+		printk(KERN_WARNING "No timer base from SFI, use default\n");
+		apbt_address = APBT_DEFAULT_BASE;
+	}
+	apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE);
+	if (apbt_virt_address) {
+		pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\
+			 (void *)apbt_address, (void *)apbt_virt_address);
+	} else {
+		pr_debug("Failed mapping APBT phy address at %p\n",\
+			 (void *)apbt_address);
+		goto panic_noapbt;
+	}
+	apbt_freq = mtmr->freq_hz / USEC_PER_SEC;
+	sfi_free_mtmr(mtmr);
+
+	/* Now figure out the physical timer id for clocksource device */
+	mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM);
+	if (mtmr == NULL)
+		goto panic_noapbt;
+
+	/* Now figure out the physical timer id */
+	phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff)
+		/ APBTMRS_REG_SIZE;
+	pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id);
+	return;
+
+panic_noapbt:
+	panic("Failed to setup APB system timer\n");
+
+}
+
+static inline void apbt_clear_mapping(void)
+{
+	iounmap(apbt_virt_address);
+	apbt_virt_address = NULL;
+}
+
+/*
+ * APBT timer interrupt enable / disable
+ */
+static inline int is_apbt_capable(void)
+{
+	return apbt_virt_address ? 1 : 0;
+}
+
+static struct clocksource clocksource_apbt = {
+	.name		= "apbt",
+	.rating		= APBT_CLOCKSOURCE_RATING,
+	.read		= apbt_read_clocksource,
+	.mask		= APBT_MASK,
+	.shift		= APBT_SHIFT,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= apbt_restart_clocksource,
+};
+
+/* boot APB clock event device */
+static struct clock_event_device apbt_clockevent = {
+	.name		= "apbt0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= apbt_set_mode,
+	.set_next_event = apbt_next_event,
+	.shift		= APBT_SHIFT,
+	.irq		= 0,
+	.rating		= APBT_CLOCKEVENT_RATING,
+};
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		disable_apbt_percpu = 0;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		disable_apbt_percpu = 1;
+	else {
+		pr_warning("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * start count down from 0xffff_ffff. this is done by toggling the enable bit
+ * then load initial load count to ~0.
+ */
+static void apbt_start_counter(int n)
+{
+	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
+
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(n, ctrl, APBTMR_N_CONTROL);
+	apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT);
+	/* enable, mask interrupt */
+	ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+	ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
+	apbt_writel(n, ctrl, APBTMR_N_CONTROL);
+	/* read it once to get cached counter value initialized */
+	apbt_read_clocksource(&clocksource_apbt);
+}
+
+static irqreturn_t apbt_interrupt_handler(int irq, void *data)
+{
+	struct apbt_dev *dev = (struct apbt_dev *)data;
+	struct clock_event_device *aevt = &dev->evt;
+
+	if (!aevt->event_handler) {
+		printk(KERN_INFO "Spurious APBT timer interrupt on %d\n",
+		       dev->num);
+		return IRQ_NONE;
+	}
+	aevt->event_handler(aevt);
+	return IRQ_HANDLED;
+}
+
+static void apbt_restart_clocksource(struct clocksource *cs)
+{
+	apbt_start_counter(phy_cs_timer_id);
+}
+
+/* Setup IRQ routing via IOAPIC */
+#ifdef CONFIG_SMP
+static void apbt_setup_irq(struct apbt_dev *adev)
+{
+	struct irq_chip *chip;
+	struct irq_desc *desc;
+
+	/* timer0 irq has been setup early */
+	if (adev->irq == 0)
+		return;
+	desc = irq_to_desc(adev->irq);
+	chip = get_irq_chip(adev->irq);
+	disable_irq(adev->irq);
+	desc->status |= IRQ_MOVE_PCNTXT;
+	irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
+	/* APB timer irqs are set up as mp_irqs, timer is edge triggerred */
+	set_irq_chip_and_handler_name(adev->irq, chip, handle_edge_irq, "edge");
+	enable_irq(adev->irq);
+	if (system_state == SYSTEM_BOOTING)
+		if (request_irq(adev->irq, apbt_interrupt_handler,
+				IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
+				adev->name, adev)) {
+			printk(KERN_ERR "Failed request IRQ for APBT%d\n",
+			       adev->num);
+		}
+}
+#endif
+
+static void apbt_enable_int(int n)
+{
+	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
+	/* clear pending intr */
+	apbt_readl(n, APBTMR_N_EOI);
+	ctrl &= ~APBTMR_CONTROL_INT;
+	apbt_writel(n, ctrl, APBTMR_N_CONTROL);
+}
+
+static void apbt_disable_int(int n)
+{
+	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
+
+	ctrl |= APBTMR_CONTROL_INT;
+	apbt_writel(n, ctrl, APBTMR_N_CONTROL);
+}
+
+
+static int __init apbt_clockevent_register(void)
+{
+	struct sfi_timer_table_entry *mtmr;
+	struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev);
+
+	mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
+	if (mtmr == NULL) {
+		printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
+		       APBT_CLOCKEVENT0_NUM);
+		return -ENODEV;
+	}
+
+	/*
+	 * We need to calculate the scaled math multiplication factor for
+	 * nanosecond to apbt tick conversion.
+	 * mult = (nsec/cycle)*2^APBT_SHIFT
+	 */
+	apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz
+				      , NSEC_PER_SEC, APBT_SHIFT);
+
+	/* Calculate the min / max delta */
+	apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
+							   &apbt_clockevent);
+	apbt_clockevent.min_delta_ns = clockevent_delta2ns(
+		APBT_MIN_DELTA_USEC*apbt_freq,
+		&apbt_clockevent);
+	/*
+	 * Start apbt with the boot cpu mask and make it
+	 * global if not used for per cpu timer.
+	 */
+	apbt_clockevent.cpumask = cpumask_of(smp_processor_id());
+	adev->num = smp_processor_id();
+	memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
+
+	if (disable_apbt_percpu) {
+		apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
+		global_clock_event = &adev->evt;
+		printk(KERN_DEBUG "%s clockevent registered as global\n",
+		       global_clock_event->name);
+	}
+
+	if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler,
+			IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
+			apbt_clockevent.name, adev)) {
+		printk(KERN_ERR "Failed request IRQ for APBT%d\n",
+		       apbt_clockevent.irq);
+	}
+
+	clockevents_register_device(&adev->evt);
+	/* Start APBT 0 interrupts */
+	apbt_enable_int(APBT_CLOCKEVENT0_NUM);
+
+	sfi_free_mtmr(mtmr);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+/* Should be called with per cpu */
+void apbt_setup_secondary_clock(void)
+{
+	struct apbt_dev *adev;
+	struct clock_event_device *aevt;
+	int cpu;
+
+	/* Don't register boot CPU clockevent */
+	cpu = smp_processor_id();
+	if (cpu == boot_cpu_id)
+		return;
+	/*
+	 * We need to calculate the scaled math multiplication factor for
+	 * nanosecond to apbt tick conversion.
+	 * mult = (nsec/cycle)*2^APBT_SHIFT
+	 */
+	printk(KERN_INFO "Init per CPU clockevent %d\n", cpu);
+	adev = &per_cpu(cpu_apbt_dev, cpu);
+	aevt = &adev->evt;
+
+	memcpy(aevt, &apbt_clockevent, sizeof(*aevt));
+	aevt->cpumask = cpumask_of(cpu);
+	aevt->name = adev->name;
+	aevt->mode = CLOCK_EVT_MODE_UNUSED;
+
+	printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n",
+	       cpu, aevt->name, *(u32 *)aevt->cpumask);
+
+	apbt_setup_irq(adev);
+
+	clockevents_register_device(aevt);
+
+	apbt_enable_int(cpu);
+
+	return;
+}
+
+/*
+ * this notify handler process CPU hotplug events. in case of S0i3, nonboot
+ * cpus are disabled/enabled frequently, for performance reasons, we keep the
+ * per cpu timer irq registered so that we do need to do free_irq/request_irq.
+ *
+ * TODO: it might be more reliable to directly disable percpu clockevent device
+ * without the notifier chain. currently, cpu 0 may get interrupts from other
+ * cpu timers during the offline process due to the ordering of notification.
+ * the extra interrupt is harmless.
+ */
+static int apbt_cpuhp_notify(struct notifier_block *n,
+			     unsigned long action, void *hcpu)
+{
+	unsigned long cpu = (unsigned long)hcpu;
+	struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu);
+
+	switch (action & 0xf) {
+	case CPU_DEAD:
+		apbt_disable_int(cpu);
+		if (system_state == SYSTEM_RUNNING)
+			pr_debug("skipping APBT CPU %lu offline\n", cpu);
+		else if (adev) {
+			pr_debug("APBT clockevent for cpu %lu offline\n", cpu);
+			free_irq(adev->irq, adev);
+		}
+		break;
+	default:
+		pr_debug(KERN_INFO "APBT notified %lu, no action\n", action);
+	}
+	return NOTIFY_OK;
+}
+
+static __init int apbt_late_init(void)
+{
+	if (disable_apbt_percpu || !apb_timer_block_enabled)
+		return 0;
+	/* This notifier should be called after workqueue is ready */
+	hotcpu_notifier(apbt_cpuhp_notify, -20);
+	return 0;
+}
+fs_initcall(apbt_late_init);
+#else
+
+void apbt_setup_secondary_clock(void) {}
+
+#endif /* CONFIG_SMP */
+
+static void apbt_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
+{
+	unsigned long ctrl;
+	uint64_t delta;
+	int timer_num;
+	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
+
+	timer_num = adev->num;
+	pr_debug("%s CPU %d timer %d mode=%d\n",
+		 __func__, first_cpu(*evt->cpumask), timer_num, mode);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult;
+		delta >>= apbt_clockevent.shift;
+		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
+		ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		/*
+		 * DW APB p. 46, have to disable timer before load counter,
+		 * may cause sync problem.
+		 */
+		ctrl &= ~APBTMR_CONTROL_ENABLE;
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		udelay(1);
+		pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ);
+		apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT);
+		ctrl |= APBTMR_CONTROL_ENABLE;
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		break;
+		/* APB timer does not have one-shot mode, use free running mode */
+	case CLOCK_EVT_MODE_ONESHOT:
+		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
+		/*
+		 * set free running mode, this mode will let timer reload max
+		 * timeout which will give time (3min on 25MHz clock) to rearm
+		 * the next event, therefore emulate the one-shot mode.
+		 */
+		ctrl &= ~APBTMR_CONTROL_ENABLE;
+		ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		/* write again to set free running mode */
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+
+		/*
+		 * DW APB p. 46, load counter with all 1s before starting free
+		 * running mode.
+		 */
+		apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT);
+		ctrl &= ~APBTMR_CONTROL_INT;
+		ctrl |= APBTMR_CONTROL_ENABLE;
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		apbt_disable_int(timer_num);
+		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
+		ctrl &= ~APBTMR_CONTROL_ENABLE;
+		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		apbt_enable_int(timer_num);
+		break;
+	}
+}
+
+static int apbt_next_event(unsigned long delta,
+			   struct clock_event_device *evt)
+{
+	unsigned long ctrl;
+	int timer_num;
+
+	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
+
+	timer_num = adev->num;
+	/* Disable timer */
+	ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+	/* write new count */
+	apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT);
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+/*
+ * APB timer clock is not in sync with pclk on Langwell, which translates to
+ * unreliable read value caused by sampling error. the error does not add up
+ * overtime and only happens when sampling a 0 as a 1 by mistake. so the time
+ * would go backwards. the following code is trying to prevent time traveling
+ * backwards. little bit paranoid.
+ */
+static cycle_t apbt_read_clocksource(struct clocksource *cs)
+{
+	unsigned long t0, t1, t2;
+	static unsigned long last_read;
+
+bad_count:
+	t1 = apbt_readl(phy_cs_timer_id,
+			APBTMR_N_CURRENT_VALUE);
+	t2 = apbt_readl(phy_cs_timer_id,
+			APBTMR_N_CURRENT_VALUE);
+	if (unlikely(t1 < t2)) {
+		pr_debug("APBT: read current count error %lx:%lx:%lx\n",
+			 t1, t2, t2 - t1);
+		goto bad_count;
+	}
+	/*
+	 * check against cached last read, makes sure time does not go back.
+	 * it could be a normal rollover but we will do tripple check anyway
+	 */
+	if (unlikely(t2 > last_read)) {
+		/* check if we have a normal rollover */
+		unsigned long raw_intr_status =
+			apbt_readl_reg(APBTMRS_RAW_INT_STATUS);
+		/*
+		 * cs timer interrupt is masked but raw intr bit is set if
+		 * rollover occurs. then we read EOI reg to clear it.
+		 */
+		if (raw_intr_status & (1 << phy_cs_timer_id)) {
+			apbt_readl(phy_cs_timer_id, APBTMR_N_EOI);
+			goto out;
+		}
+		pr_debug("APB CS going back %lx:%lx:%lx ",
+			 t2, last_read, t2 - last_read);
+bad_count_x3:
+		pr_debug(KERN_INFO "tripple check enforced\n");
+		t0 = apbt_readl(phy_cs_timer_id,
+				APBTMR_N_CURRENT_VALUE);
+		udelay(1);
+		t1 = apbt_readl(phy_cs_timer_id,
+				APBTMR_N_CURRENT_VALUE);
+		udelay(1);
+		t2 = apbt_readl(phy_cs_timer_id,
+				APBTMR_N_CURRENT_VALUE);
+		if ((t2 > t1) || (t1 > t0)) {
+			printk(KERN_ERR "Error: APB CS tripple check failed\n");
+			goto bad_count_x3;
+		}
+	}
+out:
+	last_read = t2;
+	return (cycle_t)~t2;
+}
+
+static int apbt_clocksource_register(void)
+{
+	u64 start, now;
+	cycle_t t1;
+
+	/* Start the counter, use timer 2 as source, timer 0/1 for event */
+	apbt_start_counter(phy_cs_timer_id);
+
+	/* Verify whether apbt counter works */
+	t1 = apbt_read_clocksource(&clocksource_apbt);
+	rdtscll(start);
+
+	/*
+	 * We don't know the TSC frequency yet, but waiting for
+	 * 200000 TSC cycles is safe:
+	 * 4 GHz == 50us
+	 * 1 GHz == 200us
+	 */
+	do {
+		rep_nop();
+		rdtscll(now);
+	} while ((now - start) < 200000UL);
+
+	/* APBT is the only always on clocksource, it has to work! */
+	if (t1 == apbt_read_clocksource(&clocksource_apbt))
+		panic("APBT counter not counting. APBT disabled\n");
+
+	/*
+	 * initialize and register APBT clocksource
+	 * convert that to ns/clock cycle
+	 * mult = (ns/c) * 2^APBT_SHIFT
+	 */
+	clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
+				       (unsigned long) apbt_freq, APBT_SHIFT);
+	clocksource_register(&clocksource_apbt);
+
+	return 0;
+}
+
+/*
+ * Early setup the APBT timer, only use timer 0 for booting then switch to
+ * per CPU timer if possible.
+ * returns 1 if per cpu apbt is setup
+ * returns 0 if no per cpu apbt is chosen
+ * panic if set up failed, this is the only platform timer on Moorestown.
+ */
+void __init apbt_time_init(void)
+{
+#ifdef CONFIG_SMP
+	int i;
+	struct sfi_timer_table_entry *p_mtmr;
+	unsigned int percpu_timer;
+	struct apbt_dev *adev;
+#endif
+
+	if (apb_timer_block_enabled)
+		return;
+	apbt_set_mapping();
+	if (apbt_virt_address) {
+		pr_debug("Found APBT version 0x%lx\n",\
+			 apbt_readl_reg(APBTMRS_COMP_VERSION));
+	} else
+		goto out_noapbt;
+	/*
+	 * Read the frequency and check for a sane value, for ESL model
+	 * we extend the possible clock range to allow time scaling.
+	 */
+
+	if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) {
+		pr_debug("APBT has invalid freq 0x%llx\n", apbt_freq);
+		goto out_noapbt;
+	}
+	if (apbt_clocksource_register()) {
+		pr_debug("APBT has failed to register clocksource\n");
+		goto out_noapbt;
+	}
+	if (!apbt_clockevent_register())
+		apb_timer_block_enabled = 1;
+	else {
+		pr_debug("APBT has failed to register clockevent\n");
+		goto out_noapbt;
+	}
+#ifdef CONFIG_SMP
+	/* kernel cmdline disable apb timer, so we will use lapic timers */
+	if (disable_apbt_percpu) {
+		printk(KERN_INFO "apbt: disabled per cpu timer\n");
+		return;
+	}
+	pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus());
+	if (num_possible_cpus() <= sfi_mtimer_num) {
+		percpu_timer = 1;
+		apbt_num_timers_used = num_possible_cpus();
+	} else {
+		percpu_timer = 0;
+		apbt_num_timers_used = 1;
+		adev = &per_cpu(cpu_apbt_dev, 0);
+		adev->flags &= ~APBT_DEV_USED;
+	}
+	pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used);
+
+	/* here we set up per CPU timer data structure */
+	apbt_devs = kzalloc(sizeof(struct apbt_dev) * apbt_num_timers_used,
+			    GFP_KERNEL);
+	if (!apbt_devs) {
+		printk(KERN_ERR "Failed to allocate APB timer devices\n");
+		return;
+	}
+	for (i = 0; i < apbt_num_timers_used; i++) {
+		adev = &per_cpu(cpu_apbt_dev, i);
+		adev->num = i;
+		adev->cpu = i;
+		p_mtmr = sfi_get_mtmr(i);
+		if (p_mtmr) {
+			adev->tick = p_mtmr->freq_hz;
+			adev->irq = p_mtmr->irq;
+		} else
+			printk(KERN_ERR "Failed to get timer for cpu %d\n", i);
+		adev->count = 0;
+		sprintf(adev->name, "apbt%d", i);
+	}
+#endif
+
+	return;
+
+out_noapbt:
+	apbt_clear_mapping();
+	apb_timer_block_enabled = 0;
+	panic("failed to enable APB timer\n");
+}
+
+static inline void apbt_disable(int n)
+{
+	if (is_apbt_capable()) {
+		unsigned long ctrl =  apbt_readl(n, APBTMR_N_CONTROL);
+		ctrl &= ~APBTMR_CONTROL_ENABLE;
+		apbt_writel(n, ctrl, APBTMR_N_CONTROL);
+	}
+}
+
+/* called before apb_timer_enable, use early map */
+unsigned long apbt_quick_calibrate()
+{
+	int i, scale;
+	u64 old, new;
+	cycle_t t1, t2;
+	unsigned long khz = 0;
+	u32 loop, shift;
+
+	apbt_set_mapping();
+	apbt_start_counter(phy_cs_timer_id);
+
+	/* check if the timer can count down, otherwise return */
+	old = apbt_read_clocksource(&clocksource_apbt);
+	i = 10000;
+	while (--i) {
+		if (old != apbt_read_clocksource(&clocksource_apbt))
+			break;
+	}
+	if (!i)
+		goto failed;
+
+	/* count 16 ms */
+	loop = (apbt_freq * 1000) << 4;
+
+	/* restart the timer to ensure it won't get to 0 in the calibration */
+	apbt_start_counter(phy_cs_timer_id);
+
+	old = apbt_read_clocksource(&clocksource_apbt);
+	old += loop;
+
+	t1 = __native_read_tsc();
+
+	do {
+		new = apbt_read_clocksource(&clocksource_apbt);
+	} while (new < old);
+
+	t2 = __native_read_tsc();
+
+	shift = 5;
+	if (unlikely(loop >> shift == 0)) {
+		printk(KERN_INFO
+		       "APBT TSC calibration failed, not enough resolution\n");
+		return 0;
+	}
+	scale = (int)div_u64((t2 - t1), loop >> shift);
+	khz = (scale * apbt_freq * 1000) >> shift;
+	printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz);
+	return khz;
+failed:
+	return 0;
+}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index f147a95..b5d8b0b 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,7 +31,6 @@
 #include <asm/x86_init.h>
 
 int gart_iommu_aperture;
-EXPORT_SYMBOL_GPL(gart_iommu_aperture);
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
 
@@ -394,6 +393,7 @@ void __init gart_iommu_hole_init(void)
 	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
 		int bus;
 		int dev_base, dev_limit;
+		u32 ctl;
 
 		bus = bus_dev_ranges[i].bus;
 		dev_base = bus_dev_ranges[i].dev_base;
@@ -407,7 +407,19 @@ void __init gart_iommu_hole_init(void)
 			gart_iommu_aperture = 1;
 			x86_init.iommu.iommu_init = gart_iommu_init;
 
-			aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+			ctl = read_pci_config(bus, slot, 3,
+					      AMD64_GARTAPERTURECTL);
+
+			/*
+			 * Before we do anything else disable the GART. It may
+			 * still be enabled if we boot into a crash-kernel here.
+			 * Reconfiguring the GART while it is enabled could have
+			 * unknown side-effects.
+			 */
+			ctl &= ~GARTEN;
+			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+
+			aper_order = (ctl >> 1) & 7;
 			aper_size = (32 * 1024 * 1024) << aper_order;
 			aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
 			aper_base <<= 25;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3987e44..a96489e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -51,6 +51,7 @@
 #include <asm/smp.h>
 #include <asm/mce.h>
 #include <asm/kvm_para.h>
+#include <asm/tsc.h>
 
 unsigned int num_processors;
 
@@ -581,7 +582,7 @@ calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
 		res = (((u64)(*deltatsc)) * pm_100ms);
 		do_div(res, deltapm);
 		apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
-					  "PM-Timer: %lu (%ld) \n",
+					  "PM-Timer: %lu (%ld)\n",
 					(unsigned long)res, *deltatsc);
 		*deltatsc = (long)res;
 	}
@@ -920,7 +921,7 @@ void disable_local_APIC(void)
 	unsigned int value;
 
 	/* APIC hasn't been mapped yet */
-	if (!apic_phys)
+	if (!x2apic_mode && !apic_phys)
 		return;
 
 	clear_local_APIC();
@@ -1151,8 +1152,13 @@ static void __cpuinit lapic_setup_esr(void)
  */
 void __cpuinit setup_local_APIC(void)
 {
-	unsigned int value;
-	int i, j;
+	unsigned int value, queued;
+	int i, j, acked = 0;
+	unsigned long long tsc = 0, ntsc;
+	long long max_loops = cpu_khz;
+
+	if (cpu_has_tsc)
+		rdtscll(tsc);
 
 	if (disable_apic) {
 		arch_disable_smp_support();
@@ -1204,13 +1210,32 @@ void __cpuinit setup_local_APIC(void)
 	 * the interrupt. Hence a vector might get locked. It was noticed
 	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
 	 */
-	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-		value = apic_read(APIC_ISR + i*0x10);
-		for (j = 31; j >= 0; j--) {
-			if (value & (1<<j))
-				ack_APIC_irq();
+	do {
+		queued = 0;
+		for (i = APIC_ISR_NR - 1; i >= 0; i--)
+			queued |= apic_read(APIC_IRR + i*0x10);
+
+		for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+			value = apic_read(APIC_ISR + i*0x10);
+			for (j = 31; j >= 0; j--) {
+				if (value & (1<<j)) {
+					ack_APIC_irq();
+					acked++;
+				}
+			}
 		}
-	}
+		if (acked > 256) {
+			printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n",
+			       acked);
+			break;
+		}
+		if (cpu_has_tsc) {
+			rdtscll(ntsc);
+			max_loops = (cpu_khz << 10) - (ntsc - tsc);
+		} else
+			max_loops--;
+	} while (queued && max_loops > 0);
+	WARN_ON(max_loops <= 0);
 
 	/*
 	 * Now that we are all set up, enable the APIC
@@ -1390,7 +1415,7 @@ void __init enable_IR_x2apic(void)
 	}
 
 	local_irq_save(flags);
-	mask_8259A();
+	legacy_pic->mask_all();
 	mask_IO_APIC_setup(ioapic_entries);
 
 	if (dmar_table_init_ret)
@@ -1422,7 +1447,7 @@ void __init enable_IR_x2apic(void)
 nox2apic:
 	if (!ret) /* IR enabling failed */
 		restore_IO_APIC_setup(ioapic_entries);
-	unmask_8259A();
+	legacy_pic->restore_mask();
 	local_irq_restore(flags);
 
 out:
@@ -1640,8 +1665,8 @@ int __init APIC_init_uniprocessor(void)
 	}
 #endif
 
+#ifndef CONFIG_SMP
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
 #endif
 
@@ -1891,21 +1916,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-	if (num_processors > 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
@@ -2035,7 +2045,7 @@ static int lapic_resume(struct sys_device *dev)
 		}
 
 		mask_IO_APIC_setup(ioapic_entries);
-		mask_8259A();
+		legacy_pic->mask_all();
 	}
 
 	if (x2apic_mode)
@@ -2079,7 +2089,7 @@ static int lapic_resume(struct sys_device *dev)
 
 	if (intr_remapping_enabled) {
 		reenable_intr_remapping(x2apic_mode);
-		unmask_8259A();
+		legacy_pic->restore_mask();
 		restore_IO_APIC_setup(ioapic_entries);
 		free_ioapic_entries(ioapic_entries);
 	}
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index e3c3d82..09d3b17 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -223,7 +223,7 @@ struct apic apic_flat =  {
 };
 
 /*
- * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * Physflat mode is used when there are more than 8 CPUs on a system.
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index dd2b5f2..425e53a 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -42,6 +42,7 @@
 #include <linux/errno.h>
 #include <linux/acpi.h>
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/nmi.h>
 #include <linux/smp.h>
 #include <linux/io.h>
@@ -130,24 +131,6 @@ int					es7000_plat;
 
 static unsigned int			base;
 
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
-	if (es7000_plat == ES7000_ZORRO)
-		return gsi;
-
-	if (!base) {
-		int i;
-		for (i = 0; i < nr_ioapics; i++)
-			base += nr_ioapic_registers[i];
-	}
-
-	if (!ioapic && (gsi < 16))
-		gsi += base;
-
-	return gsi;
-}
-
 static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 {
 	unsigned long vect = 0, psaival = 0;
@@ -189,7 +172,6 @@ static void setup_unisys(void)
 		es7000_plat = ES7000_ZORRO;
 	else
 		es7000_plat = ES7000_CLASSIC;
-	ioapic_renumber_irq = es7000_rename_gsi;
 }
 
 /*
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 53243ca..e41ed24 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -36,6 +36,7 @@
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>	/* time_after() */
+#include <linux/slab.h>
 #ifdef CONFIG_ACPI
 #include <acpi/acpi_bus.h>
 #endif
@@ -73,8 +74,8 @@
  */
 int sis_apic_bug = -1;
 
-static DEFINE_SPINLOCK(ioapic_lock);
-static DEFINE_SPINLOCK(vector_lock);
+static DEFINE_RAW_SPINLOCK(ioapic_lock);
+static DEFINE_RAW_SPINLOCK(vector_lock);
 
 /*
  * # of IRQ routing registers
@@ -88,14 +89,15 @@ int nr_ioapics;
 /* IO APIC gsi routing info */
 struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
 
+/* The one past the highest gsi number used */
+u32 gsi_top;
+
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
-/* Number of legacy interrupts */
-static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY;
 /* GSI interrupts */
 static int nr_irqs_gsi = NR_IRQS_LEGACY;
 
@@ -140,33 +142,10 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node)
 
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
 #ifdef CONFIG_SPARSE_IRQ
-static struct irq_cfg irq_cfgx[] = {
+static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY];
 #else
-static struct irq_cfg irq_cfgx[NR_IRQS] = {
+static struct irq_cfg irq_cfgx[NR_IRQS];
 #endif
-	[0]  = { .vector = IRQ0_VECTOR,  },
-	[1]  = { .vector = IRQ1_VECTOR,  },
-	[2]  = { .vector = IRQ2_VECTOR,  },
-	[3]  = { .vector = IRQ3_VECTOR,  },
-	[4]  = { .vector = IRQ4_VECTOR,  },
-	[5]  = { .vector = IRQ5_VECTOR,  },
-	[6]  = { .vector = IRQ6_VECTOR,  },
-	[7]  = { .vector = IRQ7_VECTOR,  },
-	[8]  = { .vector = IRQ8_VECTOR,  },
-	[9]  = { .vector = IRQ9_VECTOR,  },
-	[10] = { .vector = IRQ10_VECTOR, },
-	[11] = { .vector = IRQ11_VECTOR, },
-	[12] = { .vector = IRQ12_VECTOR, },
-	[13] = { .vector = IRQ13_VECTOR, },
-	[14] = { .vector = IRQ14_VECTOR, },
-	[15] = { .vector = IRQ15_VECTOR, },
-};
-
-void __init io_apic_disable_legacy(void)
-{
-	nr_legacy_irqs = 0;
-	nr_irqs_gsi = 0;
-}
 
 int __init arch_early_irq_init(void)
 {
@@ -176,6 +155,11 @@ int __init arch_early_irq_init(void)
 	int node;
 	int i;
 
+	if (!legacy_pic->nr_legacy_irqs) {
+		nr_irqs_gsi = 0;
+		io_apic_irqs = ~0UL;
+	}
+
 	cfg = irq_cfgx;
 	count = ARRAY_SIZE(irq_cfgx);
 	node= cpu_to_node(boot_cpu_id);
@@ -185,8 +169,14 @@ int __init arch_early_irq_init(void)
 		desc->chip_data = &cfg[i];
 		zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
 		zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
-		if (i < nr_legacy_irqs)
-			cpumask_setall(cfg[i].domain);
+		/*
+		 * For legacy IRQ's, start with assigning irq0 to irq15 to
+		 * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
+		 */
+		if (i < legacy_pic->nr_legacy_irqs) {
+			cfg[i].vector = IRQ0_VECTOR + i;
+			cpumask_set_cpu(0, cfg[i].domain);
+		}
 	}
 
 	return 0;
@@ -406,7 +396,7 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	struct irq_pin_list *entry;
 	unsigned long flags;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 		int pin;
@@ -415,11 +405,11 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
 		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
-			spin_unlock_irqrestore(&ioapic_lock, flags);
+			raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 			return true;
 		}
 	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return false;
 }
@@ -433,10 +423,10 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
 {
 	union entry_union eu;
 	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
 	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 	return eu.entry;
 }
 
@@ -459,9 +449,9 @@ __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 {
 	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
 /*
@@ -474,10 +464,10 @@ static void ioapic_mask_entry(int apic, int pin)
 	unsigned long flags;
 	union entry_union eu = { .entry.mask = 1 };
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
 	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
 /*
@@ -604,9 +594,9 @@ static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
 
 	BUG_ON(!cfg);
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	__mask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
 static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
@@ -614,9 +604,9 @@ static void unmask_IO_APIC_irq_desc(struct irq_desc *desc)
 	struct irq_cfg *cfg = desc->chip_data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	__unmask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
 static void mask_IO_APIC_irq(unsigned int irq)
@@ -865,7 +855,7 @@ static int __init find_isa_irq_apic(int irq, int type)
  */
 static int EISA_ELCR(unsigned int irq)
 {
-	if (irq < nr_legacy_irqs) {
+	if (irq < legacy_pic->nr_legacy_irqs) {
 		unsigned int port = 0x4d0 + (irq >> 3);
 		return (inb(port) >> (irq & 7)) & 1;
 	}
@@ -1026,10 +1016,9 @@ static inline int irq_trigger(int idx)
 	return MPBIOS_trigger(idx);
 }
 
-int (*ioapic_renumber_irq)(int ioapic, int irq);
 static int pin_2_irq(int idx, int apic, int pin)
 {
-	int irq, i;
+	int irq;
 	int bus = mp_irqs[idx].srcbus;
 
 	/*
@@ -1041,18 +1030,12 @@ static int pin_2_irq(int idx, int apic, int pin)
 	if (test_bit(bus, mp_bus_not_pci)) {
 		irq = mp_irqs[idx].srcbusirq;
 	} else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-		/*
-                 * For MPS mode, so far only needed by ES7000 platform
-                 */
-		if (ioapic_renumber_irq)
-			irq = ioapic_renumber_irq(apic, irq);
+		u32 gsi = mp_gsi_routing[apic].gsi_base + pin;
+
+		if (gsi >= NR_IRQS_LEGACY)
+			irq = gsi;
+		else
+			irq = gsi_top + gsi;
 	}
 
 #ifdef CONFIG_X86_32
@@ -1140,12 +1123,12 @@ void lock_vector_lock(void)
 	/* Used to the online set of cpus does not change
 	 * during assign_irq_vector.
 	 */
-	spin_lock(&vector_lock);
+	raw_spin_lock(&vector_lock);
 }
 
 void unlock_vector_lock(void)
 {
-	spin_unlock(&vector_lock);
+	raw_spin_unlock(&vector_lock);
 }
 
 static int
@@ -1162,7 +1145,8 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 	 * Also, we've got to be careful not to trash gate
 	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
 	 */
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
+	static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START;
+	static int current_offset = VECTOR_OFFSET_START % 8;
 	unsigned int old_vector;
 	int cpu, err;
 	cpumask_var_t tmp_mask;
@@ -1198,7 +1182,7 @@ next:
 		if (vector >= first_system_vector) {
 			/* If out of vectors on large boxen, must share them. */
 			offset = (offset + 1) % 8;
-			vector = FIRST_DEVICE_VECTOR + offset;
+			vector = FIRST_EXTERNAL_VECTOR + offset;
 		}
 		if (unlikely(current_vector == vector))
 			continue;
@@ -1232,9 +1216,9 @@ int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 	int err;
 	unsigned long flags;
 
-	spin_lock_irqsave(&vector_lock, flags);
+	raw_spin_lock_irqsave(&vector_lock, flags);
 	err = __assign_irq_vector(irq, cfg, mask);
-	spin_unlock_irqrestore(&vector_lock, flags);
+	raw_spin_unlock_irqrestore(&vector_lock, flags);
 	return err;
 }
 
@@ -1268,14 +1252,27 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
-	/* This function must be called with vector_lock held */
 	int irq, vector;
 	struct irq_cfg *cfg;
 	struct irq_desc *desc;
 
+	/*
+	 * vector_lock will make sure that we don't run into irq vector
+	 * assignments that might be happening on another cpu in parallel,
+	 * while we setup our initial vector to irq mappings.
+	 */
+	raw_spin_lock(&vector_lock);
 	/* Mark the inuse vectors */
 	for_each_irq_desc(irq, desc) {
 		cfg = desc->chip_data;
+
+		/*
+		 * If it is a legacy IRQ handled by the legacy PIC, this cpu
+		 * will be part of the irq_cfg's domain.
+		 */
+		if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq))
+			cpumask_set_cpu(cpu, cfg->domain);
+
 		if (!cpumask_test_cpu(cpu, cfg->domain))
 			continue;
 		vector = cfg->vector;
@@ -1291,6 +1288,7 @@ void __setup_vector_irq(int cpu)
 		if (!cpumask_test_cpu(cpu, cfg->domain))
 			per_cpu(vector_irq, cpu)[vector] = -1;
 	}
+	raw_spin_unlock(&vector_lock);
 }
 
 static struct irq_chip ioapic_chip;
@@ -1440,6 +1438,14 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 
 	cfg = desc->chip_data;
 
+	/*
+	 * For legacy irqs, cfg->domain starts with cpu 0 for legacy
+	 * controllers like 8259. Now that IO-APIC can handle this irq, update
+	 * the cfg->domain.
+	 */
+	if (irq < legacy_pic->nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain))
+		apic->vector_allocation_domain(0, cfg->domain);
+
 	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
 		return;
 
@@ -1461,8 +1467,8 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 	}
 
 	ioapic_register_intr(irq, desc, trigger);
-	if (irq < nr_legacy_irqs)
-		disable_8259A_irq(irq);
+	if (irq < legacy_pic->nr_legacy_irqs)
+		legacy_pic->chip->mask(irq);
 
 	ioapic_write_entry(apic_id, pin, entry);
 }
@@ -1473,7 +1479,7 @@ static struct {
 
 static void __init setup_IO_APIC_irqs(void)
 {
-	int apic_id = 0, pin, idx, irq;
+	int apic_id, pin, idx, irq;
 	int notcon = 0;
 	struct irq_desc *desc;
 	struct irq_cfg *cfg;
@@ -1481,14 +1487,7 @@ static void __init setup_IO_APIC_irqs(void)
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
-#ifdef CONFIG_ACPI
-	if (!acpi_disabled && acpi_ioapic) {
-		apic_id = mp_find_ioapic(0);
-		if (apic_id < 0)
-			apic_id = 0;
-	}
-#endif
-
+	for (apic_id = 0; apic_id < nr_ioapics; apic_id++)
 	for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
 		idx = find_irq_entry(apic_id, pin, mp_INT);
 		if (idx == -1) {
@@ -1510,6 +1509,9 @@ static void __init setup_IO_APIC_irqs(void)
 
 		irq = pin_2_irq(idx, apic_id, pin);
 
+		if ((apic_id > 0) && (irq > 16))
+			continue;
+
 		/*
 		 * Skip the timer IRQ if there's a quirk handler
 		 * installed and if it returns 1:
@@ -1539,6 +1541,56 @@ static void __init setup_IO_APIC_irqs(void)
 }
 
 /*
+ * for the gsit that is not in first ioapic
+ * but could not use acpi_register_gsi()
+ * like some special sci in IBM x3330
+ */
+void setup_IO_APIC_irq_extra(u32 gsi)
+{
+	int apic_id = 0, pin, idx, irq;
+	int node = cpu_to_node(boot_cpu_id);
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	apic_id = mp_find_ioapic(gsi);
+	if (apic_id < 0)
+		return;
+
+	pin = mp_find_ioapic_pin(apic_id, gsi);
+	idx = find_irq_entry(apic_id, pin, mp_INT);
+	if (idx == -1)
+		return;
+
+	irq = pin_2_irq(idx, apic_id, pin);
+#ifdef CONFIG_SPARSE_IRQ
+	desc = irq_to_desc(irq);
+	if (desc)
+		return;
+#endif
+	desc = irq_to_desc_alloc_node(irq, node);
+	if (!desc) {
+		printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+		return;
+	}
+
+	cfg = desc->chip_data;
+	add_pin_to_irq_node(cfg, node, apic_id, pin);
+
+	if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapics[apic_id].apicid, pin);
+		return;
+	}
+	set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+
+	setup_IO_APIC_irq(apic_id, pin, irq, desc,
+			irq_trigger(idx), irq_polarity(idx));
+}
+
+/*
  * Set up the timer pin, possibly with the 8259A-master behind.
  */
 static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
@@ -1601,14 +1653,14 @@ __apicdebuginit(void) print_IO_APIC(void)
 
 	for (apic = 0; apic < nr_ioapics; apic++) {
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(apic, 0);
 	reg_01.raw = io_apic_read(apic, 1);
 	if (reg_01.bits.version >= 0x10)
 		reg_02.raw = io_apic_read(apic, 2);
 	if (reg_01.bits.version >= 0x20)
 		reg_03.raw = io_apic_read(apic, 3);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	printk("\n");
 	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid);
@@ -1647,7 +1699,7 @@ __apicdebuginit(void) print_IO_APIC(void)
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
 
 	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
-			  " Stat Dmod Deli Vect:   \n");
+			  " Stat Dmod Deli Vect:\n");
 
 	for (i = 0; i <= reg_01.bits.entries; i++) {
 		struct IO_APIC_route_entry entry;
@@ -1825,12 +1877,12 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (!nr_legacy_irqs)
+	if (!legacy_pic->nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	v = inb(0xa1) << 8 | inb(0x21);
 	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
@@ -1844,7 +1896,7 @@ __apicdebuginit(void) print_PIC(void)
 	outb(0x0a,0xa0);
 	outb(0x0a,0x20);
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
 
@@ -1894,22 +1946,10 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 void __init enable_IO_APIC(void)
 {
-	union IO_APIC_reg_01 reg_01;
 	int i8259_apic, i8259_pin;
 	int apic;
-	unsigned long flags;
 
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-
-	if (!nr_legacy_irqs)
+	if (!legacy_pic->nr_legacy_irqs)
 		return;
 
 	for(apic = 0; apic < nr_ioapics; apic++) {
@@ -1966,7 +2006,7 @@ void disable_IO_APIC(void)
 	 */
 	clear_IO_APIC();
 
-	if (!nr_legacy_irqs)
+	if (!legacy_pic->nr_legacy_irqs)
 		return;
 
 	/*
@@ -2045,9 +2085,9 @@ void __init setup_ioapic_ids_from_mpc(void)
 	for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
 
 		/* Read the register 0 value */
-		spin_lock_irqsave(&ioapic_lock, flags);
+		raw_spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic_id, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
+		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		old_id = mp_ioapics[apic_id].apicid;
 
@@ -2106,16 +2146,16 @@ void __init setup_ioapic_ids_from_mpc(void)
 			mp_ioapics[apic_id].apicid);
 
 		reg_00.bits.ID = mp_ioapics[apic_id].apicid;
-		spin_lock_irqsave(&ioapic_lock, flags);
+		raw_spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(apic_id, 0, reg_00.raw);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
+		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/*
 		 * Sanity check
 		 */
-		spin_lock_irqsave(&ioapic_lock, flags);
+		raw_spin_lock_irqsave(&ioapic_lock, flags);
 		reg_00.raw = io_apic_read(apic_id, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
+		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 		if (reg_00.bits.ID != mp_ioapics[apic_id].apicid)
 			printk("could not set ID!\n");
 		else
@@ -2198,15 +2238,15 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 	unsigned long flags;
 	struct irq_cfg *cfg;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < nr_legacy_irqs) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	if (irq < legacy_pic->nr_legacy_irqs) {
+		legacy_pic->chip->mask(irq);
+		if (legacy_pic->irq_pending(irq))
 			was_pending = 1;
 	}
 	cfg = irq_cfg(irq);
 	__unmask_IO_APIC_irq(cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return was_pending;
 }
@@ -2217,9 +2257,9 @@ static int ioapic_retrigger_irq(unsigned int irq)
 	struct irq_cfg *cfg = irq_cfg(irq);
 	unsigned long flags;
 
-	spin_lock_irqsave(&vector_lock, flags);
+	raw_spin_lock_irqsave(&vector_lock, flags);
 	apic->send_IPI_mask(cpumask_of(cpumask_first(cfg->domain)), cfg->vector);
-	spin_unlock_irqrestore(&vector_lock, flags);
+	raw_spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
 }
@@ -2312,14 +2352,14 @@ set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
 	irq = desc->irq;
 	cfg = desc->chip_data;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	ret = set_desc_affinity(desc, mask, &dest);
 	if (!ret) {
 		/* Only the high 8 bits are valid. */
 		dest = SET_APIC_LOGICAL_ID(dest);
 		__target_IO_APIC_irq(irq, dest, cfg);
 	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return ret;
 }
@@ -2489,6 +2529,9 @@ void irq_force_complete_move(int irq)
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg = desc->chip_data;
 
+	if (!cfg)
+		return;
+
 	__irq_complete_move(&desc, cfg->vector);
 }
 #else
@@ -2554,9 +2597,9 @@ static void eoi_ioapic_irq(struct irq_desc *desc)
 	irq = desc->irq;
 	cfg = desc->chip_data;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	__eoi_ioapic_irq(irq, cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
 static void ack_apic_level(unsigned int irq)
@@ -2734,8 +2777,8 @@ static inline void init_IO_APIC_traps(void)
 			 * so default to an old-fashioned 8259
 			 * interrupt if we can..
 			 */
-			if (irq < nr_legacy_irqs)
-				make_8259A_irq(irq);
+			if (irq < legacy_pic->nr_legacy_irqs)
+				legacy_pic->make_irq(irq);
 			else
 				/* Strange. Oh, well.. */
 				desc->chip = &no_irq_chip;
@@ -2892,7 +2935,7 @@ static inline void __init check_timer(void)
 	/*
 	 * get/set the timer IRQ vector:
 	 */
-	disable_8259A_irq(0);
+	legacy_pic->chip->mask(0);
 	assign_irq_vector(0, cfg, apic->target_cpus());
 
 	/*
@@ -2905,7 +2948,7 @@ static inline void __init check_timer(void)
 	 * automatically.
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
+	legacy_pic->init(1);
 #ifdef CONFIG_X86_32
 	{
 		unsigned int ver;
@@ -2964,7 +3007,7 @@ static inline void __init check_timer(void)
 		if (timer_irq_works()) {
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
-				enable_8259A_irq(0);
+				legacy_pic->chip->unmask(0);
 			}
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
@@ -2987,14 +3030,14 @@ static inline void __init check_timer(void)
 		 */
 		replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
 		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
-		enable_8259A_irq(0);
+		legacy_pic->chip->unmask(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
+				legacy_pic->chip->mask(0);
 				setup_nmi();
-				enable_8259A_irq(0);
+				legacy_pic->chip->unmask(0);
 			}
 			goto out;
 		}
@@ -3002,7 +3045,7 @@ static inline void __init check_timer(void)
 		 * Cleanup, just in case ...
 		 */
 		local_irq_disable();
-		disable_8259A_irq(0);
+		legacy_pic->chip->mask(0);
 		clear_IO_APIC_pin(apic2, pin2);
 		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
@@ -3021,22 +3064,22 @@ static inline void __init check_timer(void)
 
 	lapic_register_intr(0, desc);
 	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
-	enable_8259A_irq(0);
+	legacy_pic->chip->unmask(0);
 
 	if (timer_irq_works()) {
 		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
 	local_irq_disable();
-	disable_8259A_irq(0);
+	legacy_pic->chip->mask(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
 	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
 	apic_printk(APIC_QUIET, KERN_INFO
 		    "...trying to set up timer as ExtINT IRQ...\n");
 
-	init_8259A(0);
-	make_8259A_irq(0);
+	legacy_pic->init(0);
+	legacy_pic->make_irq(0);
 	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 
 	unlock_ExtINT_logic();
@@ -3078,7 +3121,7 @@ void __init setup_IO_APIC(void)
 	/*
 	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
 	 */
-	io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
+	io_apic_irqs = legacy_pic->nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
 
 	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
 	/*
@@ -3089,7 +3132,7 @@ void __init setup_IO_APIC(void)
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
-	if (nr_legacy_irqs)
+	if (legacy_pic->nr_legacy_irqs)
 		check_timer();
 }
 
@@ -3138,13 +3181,13 @@ static int ioapic_resume(struct sys_device *dev)
 	data = container_of(dev, struct sysfs_ioapic_data, dev);
 	entry = data->entry;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(dev->id, 0);
 	if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) {
 		reg_00.bits.ID = mp_ioapics[dev->id].apicid;
 		io_apic_write(dev->id, 0, reg_00.raw);
 	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
 		ioapic_write_entry(dev->id, i, entry[i]);
 
@@ -3207,7 +3250,7 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 	if (irq_want < nr_irqs_gsi)
 		irq_want = nr_irqs_gsi;
 
-	spin_lock_irqsave(&vector_lock, flags);
+	raw_spin_lock_irqsave(&vector_lock, flags);
 	for (new = irq_want; new < nr_irqs; new++) {
 		desc_new = irq_to_desc_alloc_node(new, node);
 		if (!desc_new) {
@@ -3226,14 +3269,11 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
 			irq = new;
 		break;
 	}
-	spin_unlock_irqrestore(&vector_lock, flags);
+	raw_spin_unlock_irqrestore(&vector_lock, flags);
+
+	if (irq > 0)
+		dynamic_irq_init_keep_chip_data(irq);
 
-	if (irq > 0) {
-		dynamic_irq_init(irq);
-		/* restore it, in case dynamic_irq_init clear it */
-		if (desc_new)
-			desc_new->chip_data = cfg_new;
-	}
 	return irq;
 }
 
@@ -3255,20 +3295,13 @@ int create_irq(void)
 void destroy_irq(unsigned int irq)
 {
 	unsigned long flags;
-	struct irq_cfg *cfg;
-	struct irq_desc *desc;
 
-	/* store it, in case dynamic_irq_cleanup clear it */
-	desc = irq_to_desc(irq);
-	cfg = desc->chip_data;
-	dynamic_irq_cleanup(irq);
-	/* connect back irq_cfg */
-	desc->chip_data = cfg;
+	dynamic_irq_cleanup_keep_chip_data(irq);
 
 	free_irte(irq);
-	spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq, cfg);
-	spin_unlock_irqrestore(&vector_lock, flags);
+	raw_spin_lock_irqsave(&vector_lock, flags);
+	__clear_irq_vector(irq, get_irq_chip_data(irq));
+	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
 /*
@@ -3805,31 +3838,24 @@ int __init io_apic_get_redir_entries (int ioapic)
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	return reg_01.bits.entries;
+	/* The register returns the maximum index redir index
+	 * supported, which is one less than the total number of redir
+	 * entries.
+	 */
+	return reg_01.bits.entries + 1;
 }
 
 void __init probe_nr_irqs_gsi(void)
 {
-	int nr = 0;
+	int nr;
 
-	nr = acpi_probe_gsi();
-	if (nr > nr_irqs_gsi) {
+	nr = gsi_top + NR_IRQS_LEGACY;
+	if (nr > nr_irqs_gsi)
 		nr_irqs_gsi = nr;
-	} else {
-		/* for acpi=off or acpi is not compiled in */
-		int idx;
-
-		nr = 0;
-		for (idx = 0; idx < nr_ioapics; idx++)
-			nr += io_apic_get_redir_entries(idx) + 1;
-
-		if (nr > nr_irqs_gsi)
-			nr_irqs_gsi = nr;
-	}
 
 	printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi);
 }
@@ -3890,7 +3916,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
 	/*
 	 * IRQs < 16 are already in the irq_2_pin[] map
 	 */
-	if (irq >= nr_legacy_irqs) {
+	if (irq >= legacy_pic->nr_legacy_irqs) {
 		cfg = desc->chip_data;
 		if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
 			printk(KERN_INFO "can not add pin %d for irq %d\n",
@@ -3969,9 +3995,9 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	if (physids_empty(apic_id_map))
 		apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map);
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(ioapic, 0);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	if (apic_id >= get_physical_broadcast()) {
 		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
@@ -4005,10 +4031,10 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id)
 	if (reg_00.bits.ID != apic_id) {
 		reg_00.bits.ID = apic_id;
 
-		spin_lock_irqsave(&ioapic_lock, flags);
+		raw_spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(ioapic, 0, reg_00.raw);
 		reg_00.raw = io_apic_read(ioapic, 0);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
+		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/* Sanity check */
 		if (reg_00.bits.ID != apic_id) {
@@ -4029,29 +4055,34 @@ int __init io_apic_get_version(int ioapic)
 	union IO_APIC_reg_01	reg_01;
 	unsigned long flags;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return reg_01.bits.version;
 }
 
-int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
+int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity)
 {
-	int i;
+	int ioapic, pin, idx;
 
 	if (skip_ioapic_setup)
 		return -1;
 
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].irqtype == mp_INT &&
-		    mp_irqs[i].srcbusirq == bus_irq)
-			break;
-	if (i >= mp_irq_entries)
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return -1;
+
+	pin = mp_find_ioapic_pin(ioapic, gsi);
+	if (pin < 0)
+		return -1;
+
+	idx = find_irq_entry(ioapic, pin, mp_INT);
+	if (idx < 0)
 		return -1;
 
-	*trigger = irq_trigger(i);
-	*polarity = irq_polarity(i);
+	*trigger = irq_trigger(idx);
+	*polarity = irq_polarity(idx);
 	return 0;
 }
 
@@ -4063,27 +4094,23 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 #ifdef CONFIG_SMP
 void __init setup_ioapic_dest(void)
 {
-	int pin, ioapic = 0, irq, irq_entry;
+	int pin, ioapic, irq, irq_entry;
 	struct irq_desc *desc;
 	const struct cpumask *mask;
 
 	if (skip_ioapic_setup == 1)
 		return;
 
-#ifdef CONFIG_ACPI
-	if (!acpi_disabled && acpi_ioapic) {
-		ioapic = mp_find_ioapic(0);
-		if (ioapic < 0)
-			ioapic = 0;
-	}
-#endif
-
+	for (ioapic = 0; ioapic < nr_ioapics; ioapic++)
 	for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
 		irq_entry = find_irq_entry(ioapic, pin, mp_INT);
 		if (irq_entry == -1)
 			continue;
 		irq = pin_2_irq(irq_entry, ioapic, pin);
 
+		if ((ioapic > 0) && (irq > 16))
+			continue;
+
 		desc = irq_to_desc(irq);
 
 		/*
@@ -4196,7 +4223,7 @@ void __init ioapic_insert_resources(void)
 	}
 }
 
-int mp_find_ioapic(int gsi)
+int mp_find_ioapic(u32 gsi)
 {
 	int i = 0;
 
@@ -4211,7 +4238,7 @@ int mp_find_ioapic(int gsi)
 	return -1;
 }
 
-int mp_find_ioapic_pin(int ioapic, int gsi)
+int mp_find_ioapic_pin(int ioapic, u32 gsi)
 {
 	if (WARN_ON(ioapic == -1))
 		return -1;
@@ -4239,6 +4266,7 @@ static int bad_ioapic(unsigned long address)
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 {
 	int idx = 0;
+	int entries;
 
 	if (bad_ioapic(address))
 		return;
@@ -4257,9 +4285,17 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
+	entries = io_apic_get_redir_entries(idx);
 	mp_gsi_routing[idx].gsi_base = gsi_base;
-	mp_gsi_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
+	mp_gsi_routing[idx].gsi_end = gsi_base + entries - 1;
+
+	/*
+	 * The number of IO-APIC IRQ registers (== #pins):
+	 */
+	nr_ioapic_registers[idx] = entries;
+
+	if (mp_gsi_routing[idx].gsi_end >= gsi_top)
+		gsi_top = mp_gsi_routing[idx].gsi_end + 1;
 
 	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
 	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
@@ -4268,3 +4304,24 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 
 	nr_ioapics++;
 }
+
+/* Enable IOAPIC early just for system timer */
+void __init pre_init_apic_IRQ0(void)
+{
+	struct irq_cfg *cfg;
+	struct irq_desc *desc;
+
+	printk(KERN_INFO "Early APIC setup for system timer0\n");
+#ifndef CONFIG_SMP
+	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+#endif
+	desc = irq_to_desc_alloc_node(0, 0);
+
+	setup_local_APIC();
+
+	cfg = irq_cfg(0);
+	add_pin_to_irq_node(cfg, 0, 0, 0);
+	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
+
+	setup_IO_APIC_irq(0, 0, 0, desc, 0, 0);
+}
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 0159a69..1edaf15 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/sysdev.h>
 #include <linux/sysctl.h>
 #include <linux/percpu.h>
@@ -177,7 +178,7 @@ int __init check_nmi_watchdog(void)
 error:
 	if (nmi_watchdog == NMI_IO_APIC) {
 		if (!timer_through_8259)
-			disable_8259A_irq(0);
+			legacy_pic->chip->mask(0);
 		on_each_cpu(__acpi_nmi_disable, NULL, 1);
 	}
 
@@ -416,13 +417,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 
 	/* We can be called before check_nmi_watchdog, hence NULL check. */
 	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
-		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
+		static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */
 
-		spin_lock(&lock);
+		raw_spin_lock(&lock);
 		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
 		show_regs(regs);
 		dump_stack();
-		spin_unlock(&lock);
+		raw_spin_unlock(&lock);
 		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
 
 		rc = 1;
@@ -438,8 +439,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 		 * Ayiee, looks like this CPU is stuck ...
 		 * wait a few IRQs (5 seconds) before doing the oops ...
 		 */
-		__this_cpu_inc(per_cpu_var(alert_counter));
-		if (__this_cpu_read(per_cpu_var(alert_counter)) == 5 * nmi_hz)
+		__this_cpu_inc(alert_counter);
+		if (__this_cpu_read(alert_counter) == 5 * nmi_hz)
 			/*
 			 * die_nmi will return ONLY if NOTIFY_STOP happens..
 			 */
@@ -447,7 +448,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 				regs, panic_on_timeout);
 	} else {
 		__get_cpu_var(last_irq_sum) = sum;
-		__this_cpu_write(per_cpu_var(alert_counter), 0);
+		__this_cpu_write(alert_counter, 0);
 	}
 
 	/* see if the nmi watchdog went off */
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 98c4665..3e28401 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -225,7 +225,7 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 
 	mpc_record = 0;
 	printk(KERN_INFO
-		"Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+		"Found an OEM MPC table at %8p - parsing it...\n", oemtable);
 
 	if (memcmp(oemtable->signature, MPC_OEM_SIGNATURE, 4)) {
 		printk(KERN_WARNING
@@ -277,6 +277,7 @@ static __init void early_check_numaq(void)
 		x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
 		x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
 		x86_init.timers.tsc_pre_init = numaq_tsc_init;
+		x86_init.pci.init = pci_numaq_init;
 	}
 }
 
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 1a6559f..99d2fe0 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,32 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+	int version = apic_version[boot_cpu_physical_apicid];
+
+	if (num_possible_cpus() > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+
+#ifdef CONFIG_X86_BIGSMP
+	generic_bigsmp_probe();
+#endif
+
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +128,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= setup_apic_flat_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 450fe20..83e9be4 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void)
 	}
 #endif
 
-	if (apic == &apic_flat && num_processors > 8)
+	if (apic == &apic_flat && num_possible_cpus() > 8)
 			apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 21db3cb..e46f98f 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -5,7 +5,7 @@
  *
  * SGI UV APIC functions (note: not an Intel compatible APIC)
  *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2009 Silicon Graphics, Inc. All rights reserved.
  */
 #include <linux/cpumask.h>
 #include <linux/hardirq.h>
@@ -17,9 +17,12 @@
 #include <linux/ctype.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
+#include <linux/slab.h>
 #include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/kdebug.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -34,10 +37,13 @@
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
+#define PR_DEVEL(fmt, args...)	pr_devel("%s: " fmt, __func__, args)
+
 static enum uv_system_type uv_system_type;
 static u64 gru_start_paddr, gru_end_paddr;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+static DEFINE_SPINLOCK(uv_nmi_lock);
 
 static inline bool is_GRU_range(u64 start, u64 end)
 {
@@ -71,6 +77,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	if (!strcmp(oem_id, "SGI")) {
 		nodeid = early_get_nodeid();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
+		x86_platform.nmi_init = uv_nmi_init;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
 		else if (!strcmp(oem_table_id, "UVX"))
@@ -114,11 +121,9 @@ EXPORT_SYMBOL_GPL(uv_possible_blades);
 unsigned long sn_rtc_cycles_per_second;
 EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
 static const struct cpumask *uv_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
@@ -482,7 +487,7 @@ static void uv_heartbeat(unsigned long ignored)
 
 static void __cpuinit uv_heartbeat_enable(int cpu)
 {
-	if (!uv_cpu_hub_info(cpu)->scir.enabled) {
+	while (!uv_cpu_hub_info(cpu)->scir.enabled) {
 		struct timer_list *timer = &uv_cpu_hub_info(cpu)->scir.timer;
 
 		uv_set_cpu_scir_bits(cpu, SCIR_CPU_HEARTBEAT|SCIR_CPU_ACTIVITY);
@@ -490,11 +495,10 @@ static void __cpuinit uv_heartbeat_enable(int cpu)
 		timer->expires = jiffies + SCIR_CPU_HB_INTERVAL;
 		add_timer_on(timer, cpu);
 		uv_cpu_hub_info(cpu)->scir.enabled = 1;
-	}
 
-	/* check boot cpu */
-	if (!uv_cpu_hub_info(0)->scir.enabled)
-		uv_heartbeat_enable(0);
+		/* also ensure that boot cpu is enabled */
+		cpu = 0;
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -553,6 +557,30 @@ late_initcall(uv_init_heartbeat);
 
 #endif /* !CONFIG_HOTPLUG_CPU */
 
+/* Direct Legacy VGA I/O traffic to designated IOH */
+int uv_set_vga_state(struct pci_dev *pdev, bool decode,
+		      unsigned int command_bits, bool change_bridge)
+{
+	int domain, bus, rc;
+
+	PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
+			pdev->devfn, decode, command_bits, change_bridge);
+
+	if (!change_bridge)
+		return 0;
+
+	if ((command_bits & PCI_COMMAND_IO) == 0)
+		return 0;
+
+	domain = pci_domain_nr(pdev->bus);
+	bus = pdev->bus->number;
+
+	rc = uv_bios_set_legacy_vga_target(decode, domain, bus);
+	PR_DEVEL("vga decode %d %x:%x, rc: %d\n", decode, domain, bus, rc);
+
+	return rc;
+}
+
 /*
  * Called on each cpu to initialize the per_cpu UV data area.
  * FIXME: hotplug not supported yet
@@ -569,6 +597,46 @@ void __cpuinit uv_cpu_init(void)
 		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
 
+/*
+ * When NMI is received, print a stack trace.
+ */
+int uv_handle_nmi(struct notifier_block *self, unsigned long reason, void *data)
+{
+	if (reason != DIE_NMI_IPI)
+		return NOTIFY_OK;
+	/*
+	 * Use a lock so only one cpu prints at a time
+	 * to prevent intermixed output.
+	 */
+	spin_lock(&uv_nmi_lock);
+	pr_info("NMI stack dump cpu %u:\n", smp_processor_id());
+	dump_stack();
+	spin_unlock(&uv_nmi_lock);
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block uv_dump_stack_nmi_nb = {
+	.notifier_call	= uv_handle_nmi
+};
+
+void uv_register_nmi_notifier(void)
+{
+	if (register_die_notifier(&uv_dump_stack_nmi_nb))
+		printk(KERN_WARNING "UV NMI handler failed to register\n");
+}
+
+void uv_nmi_init(void)
+{
+	unsigned int value;
+
+	/*
+	 * Unmask NMI on all cpus
+	 */
+	value = apic_read(APIC_LVT1) | APIC_DM_NMI;
+	value &= ~APIC_LVT_MASKED;
+	apic_write(APIC_LVT1, value);
+}
 
 void __init uv_system_init(void)
 {
@@ -634,8 +702,8 @@ void __init uv_system_init(void)
 	}
 
 	uv_bios_init();
-	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
-			    &sn_coherency_id, &sn_region_size);
+	uv_bios_get_sn_info(0, &uv_type, &sn_partition_id, &sn_coherency_id,
+			    &sn_region_size, &system_serial_number);
 	uv_rtc_init();
 
 	for_each_present_cpu(cpu) {
@@ -667,9 +735,6 @@ void __init uv_system_init(void)
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
 		max_pnode = max(pnode, max_pnode);
-
-		printk(KERN_DEBUG "UV: cpu %d, apicid 0x%x, pnode %d, nid %d, lcpu %d, blade %d\n",
-			cpu, apicid, pnode, nid, lcpu, blade);
 	}
 
 	/* Add blade/pnode info for nodes without cpus */
@@ -690,5 +755,9 @@ void __init uv_system_init(void)
 
 	uv_cpu_init();
 	uv_scir_register_cpu_notifier();
+	uv_register_nmi_notifier();
 	proc_mkdir("sgi_uv", NULL);
+
+	/* register Legacy VGA I/O redirection handler */
+	pci_register_set_vga_state(uv_set_vga_state);
 }
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index b5b6b23..c4f9182 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1224,7 +1224,7 @@ static void reinit_timer(void)
 #ifdef INIT_TIMER_AFTER_SUSPEND
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8253_lock, flags);
+	raw_spin_lock_irqsave(&i8253_lock, flags);
 	/* set the clock to HZ */
 	outb_pit(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
 	udelay(10);
@@ -1232,7 +1232,7 @@ static void reinit_timer(void)
 	udelay(10);
 	outb_pit(LATCH >> 8, PIT_CH0);	/* MSB */
 	udelay(10);
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
 #endif
 }
 
@@ -1992,8 +1992,8 @@ static int __init apm_is_horked_d850md(const struct dmi_system_id *d)
 		apm_info.disabled = 1;
 		printk(KERN_INFO "%s machine detected. "
 		       "Disabling APM.\n", d->ident);
-		printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n");
-		printk(KERN_INFO "download from support.intel.com \n");
+		printk(KERN_INFO "This bug is fixed in bios P15 which is available for\n");
+		printk(KERN_INFO "download from support.intel.com\n");
 	}
 	return 0;
 }
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
index b0206a2..8bc57ba 100644
--- a/arch/x86/kernel/bios_uv.c
+++ b/arch/x86/kernel/bios_uv.c
@@ -15,8 +15,8 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
- *  Copyright (c) Russ Anderson
+ *  Copyright (c) 2008-2009 Silicon Graphics, Inc.  All Rights Reserved.
+ *  Copyright (c) Russ Anderson <rja@sgi.com>
  */
 
 #include <linux/efi.h>
@@ -30,6 +30,7 @@ static struct uv_systab uv_systab;
 s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
 {
 	struct uv_systab *tab = &uv_systab;
+	s64 ret;
 
 	if (!tab->function)
 		/*
@@ -37,9 +38,11 @@ s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
 		 */
 		return BIOS_STATUS_UNIMPLEMENTED;
 
-	return efi_call6((void *)__va(tab->function),
-					(u64)which, a1, a2, a3, a4, a5);
+	ret = efi_call6((void *)__va(tab->function), (u64)which,
+			a1, a2, a3, a4, a5);
+	return ret;
 }
+EXPORT_SYMBOL_GPL(uv_bios_call);
 
 s64 uv_bios_call_irqsave(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
 					u64 a4, u64 a5)
@@ -73,11 +76,14 @@ long sn_coherency_id;
 EXPORT_SYMBOL_GPL(sn_coherency_id);
 long sn_region_size;
 EXPORT_SYMBOL_GPL(sn_region_size);
+long system_serial_number;
+EXPORT_SYMBOL_GPL(system_serial_number);
 int uv_type;
+EXPORT_SYMBOL_GPL(uv_type);
 
 
 s64 uv_bios_get_sn_info(int fc, int *uvtype, long *partid, long *coher,
-		long *region)
+		long *region, long *ssn)
 {
 	s64 ret;
 	u64 v0, v1;
@@ -97,8 +103,11 @@ s64 uv_bios_get_sn_info(int fc, int *uvtype, long *partid, long *coher,
 		*coher = part.coherence_id;
 	if (region)
 		*region = part.region_size;
+	if (ssn)
+		*ssn = v1;
 	return ret;
 }
+EXPORT_SYMBOL_GPL(uv_bios_get_sn_info);
 
 int
 uv_bios_mq_watchlist_alloc(unsigned long addr, unsigned int mq_size,
@@ -154,6 +163,25 @@ s64 uv_bios_freq_base(u64 clock_type, u64 *ticks_per_second)
 }
 EXPORT_SYMBOL_GPL(uv_bios_freq_base);
 
+/*
+ * uv_bios_set_legacy_vga_target - Set Legacy VGA I/O Target
+ * @decode: true to enable target, false to disable target
+ * @domain: PCI domain number
+ * @bus: PCI bus number
+ *
+ * Returns:
+ *    0: Success
+ *    -EINVAL: Invalid domain or bus number
+ *    -ENOSYS: Capability not available
+ *    -EBUSY: Legacy VGA I/O cannot be retargeted at this time
+ */
+int uv_bios_set_legacy_vga_target(bool decode, int domain, int bus)
+{
+	return uv_bios_call(UV_BIOS_SET_LEGACY_VGA_TARGET,
+				(u64)decode, (u64)domain, (u64)bus, 0, 0);
+}
+EXPORT_SYMBOL_GPL(uv_bios_set_legacy_vga_target);
+
 
 #ifdef CONFIG_EFI
 void uv_bios_init(void)
@@ -185,4 +213,3 @@ void uv_bios_init(void)
 
 void uv_bios_init(void) { }
 #endif
-
diff --git a/arch/x86/kernel/bootflag.c b/arch/x86/kernel/bootflag.c
index 30f25a7..5de7f4c 100644
--- a/arch/x86/kernel/bootflag.c
+++ b/arch/x86/kernel/bootflag.c
@@ -5,7 +5,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/acpi.h>
 #include <asm/io.h>
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index c202b62..3a785da 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -14,7 +14,7 @@ CFLAGS_common.o		:= $(nostackp)
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
-obj-y			+= vmware.o hypervisor.o sched.o
+obj-y			+= vmware.o hypervisor.o sched.o mshyperv.o
 
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 468489b..10fa568 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -30,8 +30,14 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
-		{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 },
+		{ X86_FEATURE_IDA,   		CR_EAX, 1, 0x00000006 },
+		{ X86_FEATURE_ARAT,  		CR_EAX, 2, 0x00000006 },
+		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006 },
+		{ X86_FEATURE_CPB,   		CR_EDX, 9, 0x80000007 },
+		{ X86_FEATURE_NPT,   		CR_EDX, 0, 0x8000000a },
+		{ X86_FEATURE_LBRV,  		CR_EDX, 1, 0x8000000a },
+		{ X86_FEATURE_SVML,  		CR_EDX, 2, 0x8000000a },
+		{ X86_FEATURE_NRIPS, 		CR_EDX, 3, 0x8000000a },
 		{ 0, 0, 0, 0 }
 	};
 
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 01a2652..c39576c 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -86,7 +86,7 @@ static void __init check_fpu(void)
 
 static void __init check_hlt(void)
 {
-	if (paravirt_enabled())
+	if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
 		return;
 
 	printk(KERN_INFO "Checking 'hlt' instruction... ");
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4868e4a..68e4a6f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1084,6 +1084,20 @@ static void clear_all_debug_regs(void)
 	}
 }
 
+#ifdef CONFIG_KGDB
+/*
+ * Restore debug regs if using kgdbwait and you have a kernel debugger
+ * connection established.
+ */
+static void dbg_restore_debug_regs(void)
+{
+	if (unlikely(kgdb_connected && arch_kgdb_ops.correct_hw_break))
+		arch_kgdb_ops.correct_hw_break();
+}
+#else /* ! CONFIG_KGDB */
+#define dbg_restore_debug_regs()
+#endif /* ! CONFIG_KGDB */
+
 /*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
@@ -1107,9 +1121,9 @@ void __cpuinit cpu_init(void)
 	oist = &per_cpu(orig_ist, cpu);
 
 #ifdef CONFIG_NUMA
-	if (cpu != 0 && percpu_read(node_number) == 0 &&
-	    cpu_to_node(cpu) != NUMA_NO_NODE)
-		percpu_write(node_number, cpu_to_node(cpu));
+	if (cpu != 0 && percpu_read(numa_node) == 0 &&
+	    early_cpu_to_node(cpu) != NUMA_NO_NODE)
+		set_numa_node(early_cpu_to_node(cpu));
 #endif
 
 	me = current;
@@ -1174,18 +1188,8 @@ void __cpuinit cpu_init(void)
 	load_TR_desc();
 	load_LDT(&init_mm.context);
 
-#ifdef CONFIG_KGDB
-	/*
-	 * If the kgdb is connected no debug regs should be altered.  This
-	 * is only applicable when KGDB and a KGDB I/O module are built
-	 * into the kernel and you are using early debugging with
-	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
-	 */
-	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
-		arch_kgdb_ops.correct_hw_break();
-	else
-#endif
-		clear_all_debug_regs();
+	clear_all_debug_regs();
+	dbg_restore_debug_regs();
 
 	fpu_init();
 
@@ -1239,14 +1243,12 @@ void __cpuinit cpu_init(void)
 #endif
 
 	clear_all_debug_regs();
+	dbg_restore_debug_regs();
 
 	/*
 	 * Force FPU initialization:
 	 */
-	if (cpu_has_xsave)
-		current_thread_info()->status = TS_XSAVE;
-	else
-		current_thread_info()->status = 0;
+	current_thread_info()->status = 0;
 	clear_used_math();
 	mxcsr_feature_mask_init();
 
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index f138c6c..870e6cc 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -10,6 +10,20 @@ if CPU_FREQ
 
 comment "CPUFreq processor drivers"
 
+config X86_PCC_CPUFREQ
+	tristate "Processor Clocking Control interface driver"
+	depends on ACPI && ACPI_PROCESSOR
+	help
+	  This driver adds support for the PCC interface.
+
+	  For details, take a look at:
+	  <file:Documentation/cpu-freq/pcc-cpufreq.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcc-cpufreq.
+
+	  If in doubt, say N.
+
 config X86_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
 	select CPU_FREQ_TABLE
diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
index 509296d..bd54bf6 100644
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ b/arch/x86/kernel/cpu/cpufreq/Makefile
@@ -2,8 +2,9 @@
 # K8 systems. ACPI is preferred to all other hardware-specific drivers.
 # speedstep-* is preferred over p4-clockmod.
 
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o mperf.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o mperf.o
+obj-$(CONFIG_X86_PCC_CPUFREQ)		+= pcc-cpufreq.o
 obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 1b1920f..1d3cdda 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -33,6 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/compiler.h>
 #include <linux/dmi.h>
+#include <linux/slab.h>
 #include <trace/events/power.h>
 
 #include <linux/acpi.h>
@@ -45,6 +46,7 @@
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
+#include "mperf.h"
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
 		"acpi-cpufreq", msg)
@@ -70,8 +72,6 @@ struct acpi_cpufreq_data {
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data);
 
-static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf);
-
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance *acpi_perf_data;
 
@@ -239,45 +239,6 @@ static u32 get_cur_val(const struct cpumask *mask)
 	return cmd.val;
 }
 
-/* Called via smp_call_function_single(), on the target CPU */
-static void read_measured_perf_ctrs(void *_cur)
-{
-	struct aperfmperf *am = _cur;
-
-	get_aperfmperf(am);
-}
-
-/*
- * Return the measured active (C0) frequency on this CPU since last call
- * to this function.
- * Input: cpu number
- * Return: Average CPU frequency in terms of max frequency (zero on error)
- *
- * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
- * over a period of time, while CPU is in C0 state.
- * IA32_MPERF counts at the rate of max advertised frequency
- * IA32_APERF counts at the rate of actual CPU frequency
- * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
- * no meaning should be associated with absolute values of these MSRs.
- */
-static unsigned int get_measured_perf(struct cpufreq_policy *policy,
-				      unsigned int cpu)
-{
-	struct aperfmperf perf;
-	unsigned long ratio;
-	unsigned int retval;
-
-	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
-		return 0;
-
-	ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf);
-	per_cpu(acfreq_old_perf, cpu) = perf;
-
-	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
-
-	return retval;
-}
-
 static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu);
@@ -701,7 +662,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* Check for APERF/MPERF support in hardware */
 	if (cpu_has(c, X86_FEATURE_APERFMPERF))
-		acpi_cpufreq_driver.getavg = get_measured_perf;
+		acpi_cpufreq_driver.getavg = cpufreq_get_measured_perf;
 
 	dprintk("CPU%u - ACPI performance management activated.\n", cpu);
 	for (i = 0; i < perf->state_count; i++)
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index 006b278..c587db4 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -20,7 +20,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/cpufreq.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index ac27ec2..16e3483 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -80,6 +80,7 @@
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 
 #include <asm/processor-cyrix.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index da5f70f..e7b559d 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -9,7 +9,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/cpufreq.h>
 #include <linux/timex.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.c b/arch/x86/kernel/cpu/cpufreq/mperf.c
new file mode 100644
index 0000000..911e193
--- /dev/null
+++ b/arch/x86/kernel/cpu/cpufreq/mperf.c
@@ -0,0 +1,51 @@
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+
+#include "mperf.h"
+
+static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf);
+
+/* Called via smp_call_function_single(), on the target CPU */
+static void read_measured_perf_ctrs(void *_cur)
+{
+	struct aperfmperf *am = _cur;
+
+	get_aperfmperf(am);
+}
+
+/*
+ * Return the measured active (C0) frequency on this CPU since last call
+ * to this function.
+ * Input: cpu number
+ * Return: Average CPU frequency in terms of max frequency (zero on error)
+ *
+ * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance
+ * over a period of time, while CPU is in C0 state.
+ * IA32_MPERF counts at the rate of max advertised frequency
+ * IA32_APERF counts at the rate of actual CPU frequency
+ * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and
+ * no meaning should be associated with absolute values of these MSRs.
+ */
+unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
+					unsigned int cpu)
+{
+	struct aperfmperf perf;
+	unsigned long ratio;
+	unsigned int retval;
+
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
+		return 0;
+
+	ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf);
+	per_cpu(acfreq_old_perf, cpu) = perf;
+
+	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_measured_perf);
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/mperf.h b/arch/x86/kernel/cpu/cpufreq/mperf.h
new file mode 100644
index 0000000..5dbf295
--- /dev/null
+++ b/arch/x86/kernel/cpu/cpufreq/mperf.h
@@ -0,0 +1,9 @@
+/*
+ *  (c) 2010 Advanced Micro Devices, Inc.
+ *  Your use of this code is subject to the terms and conditions of the
+ *  GNU general public license version 2. See "COPYING" or
+ *  http://www.gnu.org/licenses/gpl.html
+ */
+
+unsigned int cpufreq_get_measured_perf(struct cpufreq_policy *policy,
+					unsigned int cpu);
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 8696151..7b8a8ba 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 #include <linux/cpumask.h>
 #include <linux/timex.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
new file mode 100644
index 0000000..a36de5b
--- /dev/null
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -0,0 +1,620 @@
+/*
+ *  pcc-cpufreq.c - Processor Clocking Control firmware cpufreq interface
+ *
+ *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ *	Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ *  INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <acpi/processor.h>
+
+#define PCC_VERSION 	"1.00.00"
+#define POLL_LOOPS 	300
+
+#define CMD_COMPLETE 	0x1
+#define CMD_GET_FREQ 	0x0
+#define CMD_SET_FREQ 	0x1
+
+#define BUF_SZ		4
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,	\
+					     "pcc-cpufreq", msg)
+
+struct pcc_register_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 bit_width;
+	u8 bit_offset;
+	u8 access_size;
+	u64 address;
+} __attribute__ ((packed));
+
+struct pcc_memory_resource {
+	u8 descriptor;
+	u16 length;
+	u8 space_id;
+	u8 resource_usage;
+	u8 type_specific;
+	u64 granularity;
+	u64 minimum;
+	u64 maximum;
+	u64 translation_offset;
+	u64 address_length;
+} __attribute__ ((packed));
+
+static struct cpufreq_driver pcc_cpufreq_driver;
+
+struct pcc_header {
+	u32 signature;
+	u16 length;
+	u8 major;
+	u8 minor;
+	u32 features;
+	u16 command;
+	u16 status;
+	u32 latency;
+	u32 minimum_time;
+	u32 maximum_time;
+	u32 nominal;
+	u32 throttled_frequency;
+	u32 minimum_frequency;
+};
+
+static void __iomem *pcch_virt_addr;
+static struct pcc_header __iomem *pcch_hdr;
+
+static DEFINE_SPINLOCK(pcc_lock);
+
+static struct acpi_generic_address doorbell;
+
+static u64 doorbell_preserve;
+static u64 doorbell_write;
+
+static u8 OSC_UUID[16] = {0x63, 0x9B, 0x2C, 0x9F, 0x70, 0x91, 0x49, 0x1f,
+			  0xBB, 0x4F, 0xA5, 0x98, 0x2F, 0xA1, 0xB5, 0x46};
+
+struct pcc_cpu {
+	u32 input_offset;
+	u32 output_offset;
+};
+
+static struct pcc_cpu *pcc_cpu_info;
+
+static int pcc_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static inline void pcc_cmd(void)
+{
+	u64 doorbell_value;
+	int i;
+
+	acpi_read(&doorbell_value, &doorbell);
+	acpi_write((doorbell_value & doorbell_preserve) | doorbell_write,
+		   &doorbell);
+
+	for (i = 0; i < POLL_LOOPS; i++) {
+		if (ioread16(&pcch_hdr->status) & CMD_COMPLETE)
+			break;
+	}
+}
+
+static inline void pcc_clear_mapping(void)
+{
+	if (pcch_virt_addr)
+		iounmap(pcch_virt_addr);
+	pcch_virt_addr = NULL;
+}
+
+static unsigned int pcc_get_freq(unsigned int cpu)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	unsigned int curr_freq;
+	unsigned int freq_limit;
+	u16 status;
+	u32 input_buffer;
+	u32 output_buffer;
+
+	spin_lock(&pcc_lock);
+
+	dprintk("get: get_freq for CPU %d\n", cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	input_buffer = 0x1;
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_GET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	output_buffer =
+		ioread32(pcch_virt_addr + pcc_cpu_data->output_offset);
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	if (status != CMD_COMPLETE) {
+		dprintk("get: FAILED: for CPU %d, status is %d\n",
+			cpu, status);
+		goto cmd_incomplete;
+	}
+	iowrite16(0, &pcch_hdr->status);
+	curr_freq = (((ioread32(&pcch_hdr->nominal) * (output_buffer & 0xff))
+			/ 100) * 1000);
+
+	dprintk("get: SUCCESS: (virtual) output_offset for cpu %d is "
+		"0x%x, contains a value of: 0x%x. Speed is: %d MHz\n",
+		cpu, (pcch_virt_addr + pcc_cpu_data->output_offset),
+		output_buffer, curr_freq);
+
+	freq_limit = (output_buffer >> 8) & 0xff;
+	if (freq_limit != 0xff) {
+		dprintk("get: frequency for cpu %d is being temporarily"
+			" capped at %d\n", cpu, curr_freq);
+	}
+
+	spin_unlock(&pcc_lock);
+	return curr_freq;
+
+cmd_incomplete:
+	iowrite16(0, &pcch_hdr->status);
+	spin_unlock(&pcc_lock);
+	return -EINVAL;
+}
+
+static int pcc_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pcc_cpu *pcc_cpu_data;
+	struct cpufreq_freqs freqs;
+	u16 status;
+	u32 input_buffer;
+	int cpu;
+
+	spin_lock(&pcc_lock);
+	cpu = policy->cpu;
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	dprintk("target: CPU %d should go to target freq: %d "
+		"(virtual) input_offset is 0x%x\n",
+		cpu, target_freq,
+		(pcch_virt_addr + pcc_cpu_data->input_offset));
+
+	freqs.new = target_freq;
+	freqs.cpu = cpu;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	input_buffer = 0x1 | (((target_freq * 100)
+			       / (ioread32(&pcch_hdr->nominal) * 1000)) << 8);
+	iowrite32(input_buffer,
+			(pcch_virt_addr + pcc_cpu_data->input_offset));
+	iowrite16(CMD_SET_FREQ, &pcch_hdr->command);
+
+	pcc_cmd();
+
+	/* Clear the input buffer - we are done with the current command */
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+
+	status = ioread16(&pcch_hdr->status);
+	if (status != CMD_COMPLETE) {
+		dprintk("target: FAILED for cpu %d, with status: 0x%x\n",
+			cpu, status);
+		goto cmd_incomplete;
+	}
+	iowrite16(0, &pcch_hdr->status);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	dprintk("target: was SUCCESSFUL for cpu %d\n", cpu);
+	spin_unlock(&pcc_lock);
+
+	return 0;
+
+cmd_incomplete:
+	iowrite16(0, &pcch_hdr->status);
+	spin_unlock(&pcc_lock);
+	return -EINVAL;
+}
+
+static int pcc_get_offset(int cpu)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object *pccp, *offset;
+	struct pcc_cpu *pcc_cpu_data;
+	struct acpi_processor *pr;
+	int ret = 0;
+
+	pr = per_cpu(processors, cpu);
+	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
+
+	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	pccp = buffer.pointer;
+	if (!pccp || pccp->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	};
+
+	offset = &(pccp->package.elements[0]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->input_offset = offset->integer.value;
+
+	offset = &(pccp->package.elements[1]);
+	if (!offset || offset->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcc_cpu_data->output_offset = offset->integer.value;
+
+	memset_io((pcch_virt_addr + pcc_cpu_data->input_offset), 0, BUF_SZ);
+	memset_io((pcch_virt_addr + pcc_cpu_data->output_offset), 0, BUF_SZ);
+
+	dprintk("pcc_get_offset: for CPU %d: pcc_cpu_data "
+		"input_offset: 0x%x, pcc_cpu_data output_offset: 0x%x\n",
+		cpu, pcc_cpu_data->input_offset, pcc_cpu_data->output_offset);
+out_free:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
+{
+	acpi_status status;
+	struct acpi_object_list input;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object in_params[4];
+	union acpi_object *out_obj;
+	u32 capabilities[2];
+	u32 errors;
+	u32 supported;
+	int ret = 0;
+
+	input.count = 4;
+	input.pointer = in_params;
+	input.count = 4;
+	input.pointer = in_params;
+	in_params[0].type               = ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length      = 16;
+	in_params[0].buffer.pointer     = OSC_UUID;
+	in_params[1].type               = ACPI_TYPE_INTEGER;
+	in_params[1].integer.value      = 1;
+	in_params[2].type               = ACPI_TYPE_INTEGER;
+	in_params[2].integer.value      = 2;
+	in_params[3].type               = ACPI_TYPE_BUFFER;
+	in_params[3].buffer.length      = 8;
+	in_params[3].buffer.pointer     = (u8 *)&capabilities;
+
+	capabilities[0] = OSC_QUERY_ENABLE;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	kfree(output.pointer);
+	capabilities[0] = 0x0;
+	capabilities[1] = 0x1;
+
+	status = acpi_evaluate_object(*handle, "_OSC", &input, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (!output.length)
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER)
+		return -ENODEV;
+
+	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+	if (errors)
+		return -ENODEV;
+
+	supported = *((u32 *)(out_obj->buffer.pointer + 4));
+	if (!(supported & 0x1))
+		return -ENODEV;
+
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int __init pcc_cpufreq_probe(void)
+{
+	acpi_status status;
+	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct pcc_memory_resource *mem_resource;
+	struct pcc_register_resource *reg_resource;
+	union acpi_object *out_obj, *member;
+	acpi_handle handle, osc_handle, pcch_handle;
+	int ret = 0;
+
+	status = acpi_get_handle(NULL, "\\_SB", &handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_get_handle(handle, "PCCH", &pcch_handle);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	status = acpi_get_handle(handle, "_OSC", &osc_handle);
+	if (ACPI_SUCCESS(status)) {
+		ret = pcc_cpufreq_do_osc(&osc_handle);
+		if (ret)
+			dprintk("probe: _OSC evaluation did not succeed\n");
+		/* Firmware's use of _OSC is optional */
+		ret = 0;
+	}
+
+	status = acpi_evaluate_object(handle, "PCCH", NULL, &output);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_PACKAGE) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	member = &out_obj->package.elements[0];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	mem_resource = (struct pcc_memory_resource *)member->buffer.pointer;
+
+	dprintk("probe: mem_resource descriptor: 0x%x,"
+		" length: %d, space_id: %d, resource_usage: %d,"
+		" type_specific: %d, granularity: 0x%llx,"
+		" minimum: 0x%llx, maximum: 0x%llx,"
+		" translation_offset: 0x%llx, address_length: 0x%llx\n",
+		mem_resource->descriptor, mem_resource->length,
+		mem_resource->space_id, mem_resource->resource_usage,
+		mem_resource->type_specific, mem_resource->granularity,
+		mem_resource->minimum, mem_resource->maximum,
+		mem_resource->translation_offset,
+		mem_resource->address_length);
+
+	if (mem_resource->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	pcch_virt_addr = ioremap_nocache(mem_resource->minimum,
+					mem_resource->address_length);
+	if (pcch_virt_addr == NULL) {
+		dprintk("probe: could not map shared mem region\n");
+		goto out_free;
+	}
+	pcch_hdr = pcch_virt_addr;
+
+	dprintk("probe: PCCH header (virtual) addr: 0x%p\n", pcch_hdr);
+	dprintk("probe: PCCH header is at physical address: 0x%llx,"
+		" signature: 0x%x, length: %d bytes, major: %d, minor: %d,"
+		" supported features: 0x%x, command field: 0x%x,"
+		" status field: 0x%x, nominal latency: %d us\n",
+		mem_resource->minimum, ioread32(&pcch_hdr->signature),
+		ioread16(&pcch_hdr->length), ioread8(&pcch_hdr->major),
+		ioread8(&pcch_hdr->minor), ioread32(&pcch_hdr->features),
+		ioread16(&pcch_hdr->command), ioread16(&pcch_hdr->status),
+		ioread32(&pcch_hdr->latency));
+
+	dprintk("probe: min time between commands: %d us,"
+		" max time between commands: %d us,"
+		" nominal CPU frequency: %d MHz,"
+		" minimum CPU frequency: %d MHz,"
+		" minimum CPU frequency without throttling: %d MHz\n",
+		ioread32(&pcch_hdr->minimum_time),
+		ioread32(&pcch_hdr->maximum_time),
+		ioread32(&pcch_hdr->nominal),
+		ioread32(&pcch_hdr->throttled_frequency),
+		ioread32(&pcch_hdr->minimum_frequency));
+
+	member = &out_obj->package.elements[1];
+	if (member->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	reg_resource = (struct pcc_register_resource *)member->buffer.pointer;
+
+	doorbell.space_id = reg_resource->space_id;
+	doorbell.bit_width = reg_resource->bit_width;
+	doorbell.bit_offset = reg_resource->bit_offset;
+	doorbell.access_width = 64;
+	doorbell.address = reg_resource->address;
+
+	dprintk("probe: doorbell: space_id is %d, bit_width is %d, "
+		"bit_offset is %d, access_width is %d, address is 0x%llx\n",
+		doorbell.space_id, doorbell.bit_width, doorbell.bit_offset,
+		doorbell.access_width, reg_resource->address);
+
+	member = &out_obj->package.elements[2];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_preserve = member->integer.value;
+
+	member = &out_obj->package.elements[3];
+	if (member->type != ACPI_TYPE_INTEGER) {
+		ret = -ENODEV;
+		goto pcch_free;
+	}
+
+	doorbell_write = member->integer.value;
+
+	dprintk("probe: doorbell_preserve: 0x%llx,"
+		" doorbell_write: 0x%llx\n",
+		doorbell_preserve, doorbell_write);
+
+	pcc_cpu_info = alloc_percpu(struct pcc_cpu);
+	if (!pcc_cpu_info) {
+		ret = -ENOMEM;
+		goto pcch_free;
+	}
+
+	printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
+	       " limits: %d MHz, %d MHz\n", PCC_VERSION,
+	       ioread32(&pcch_hdr->minimum_frequency),
+	       ioread32(&pcch_hdr->nominal));
+	kfree(output.pointer);
+	return ret;
+pcch_free:
+	pcc_clear_mapping();
+out_free:
+	kfree(output.pointer);
+	return ret;
+}
+
+static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int cpu = policy->cpu;
+	unsigned int result = 0;
+
+	if (!pcch_virt_addr) {
+		result = -1;
+		goto out;
+	}
+
+	result = pcc_get_offset(cpu);
+	if (result) {
+		dprintk("init: PCCP evaluation failed\n");
+		goto out;
+	}
+
+	policy->max = policy->cpuinfo.max_freq =
+		ioread32(&pcch_hdr->nominal) * 1000;
+	policy->min = policy->cpuinfo.min_freq =
+		ioread32(&pcch_hdr->minimum_frequency) * 1000;
+	policy->cur = pcc_get_freq(cpu);
+
+	if (!policy->cur) {
+		dprintk("init: Unable to get current CPU frequency\n");
+		result = -EINVAL;
+		goto out;
+	}
+
+	dprintk("init: policy->max is %d, policy->min is %d\n",
+		policy->max, policy->min);
+out:
+	return result;
+}
+
+static int pcc_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+
+static struct cpufreq_driver pcc_cpufreq_driver = {
+	.flags = CPUFREQ_CONST_LOOPS,
+	.get = pcc_get_freq,
+	.verify = pcc_cpufreq_verify,
+	.target = pcc_cpufreq_target,
+	.init = pcc_cpufreq_cpu_init,
+	.exit = pcc_cpufreq_cpu_exit,
+	.name = "pcc-cpufreq",
+	.owner = THIS_MODULE,
+};
+
+static int __init pcc_cpufreq_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	ret = pcc_cpufreq_probe();
+	if (ret) {
+		dprintk("pcc_cpufreq_init: PCCH evaluation failed\n");
+		return ret;
+	}
+
+	ret = cpufreq_register_driver(&pcc_cpufreq_driver);
+
+	return ret;
+}
+
+static void __exit pcc_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pcc_cpufreq_driver);
+
+	pcc_clear_mapping();
+
+	free_percpu(pcc_cpu_info);
+}
+
+MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
+MODULE_VERSION(PCC_VERSION);
+MODULE_DESCRIPTION("Processor Clocking Control interface driver");
+MODULE_LICENSE("GPL");
+
+late_initcall(pcc_cpufreq_init);
+module_exit(pcc_cpufreq_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index cb01dac..b3379d6 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/timex.h>
 #include <linux/io.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index f125e5c..3e90cce 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1,6 +1,5 @@
-
 /*
- *   (c) 2003-2006 Advanced Micro Devices, Inc.
+ *   (c) 2003-2010 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -46,6 +45,7 @@
 #define PFX "powernow-k8: "
 #define VERSION "version 2.20.00"
 #include "powernow-k8.h"
+#include "mperf.h"
 
 /* serialize freq changes  */
 static DEFINE_MUTEX(fidvid_mutex);
@@ -54,6 +54,12 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
 
 static int cpu_family = CPU_OPTERON;
 
+/* core performance boost */
+static bool cpb_capable, cpb_enabled;
+static struct msr __percpu *msrs;
+
+static struct cpufreq_driver cpufreq_amd64_driver;
+
 #ifndef CONFIG_SMP
 static inline const struct cpumask *cpu_core_mask(int cpu)
 {
@@ -806,7 +812,7 @@ static int find_psb_table(struct powernow_k8_data *data)
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
 		unsigned int index)
 {
-	acpi_integer control;
+	u64 control;
 
 	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
 		return;
@@ -824,7 +830,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val = -ENODEV;
-	acpi_integer control, status;
+	u64 control, status;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
@@ -929,7 +935,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 		powernow_table[i].index = index;
 
 		/* Frequency may be rounded for these */
-		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+		if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+				 || boot_cpu_data.x86 == 0x11) {
 			powernow_table[i].frequency =
 				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
 		} else
@@ -948,7 +955,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		u32 fid;
 		u32 vid;
 		u32 freq, index;
-		acpi_integer status, control;
+		u64 status, control;
 
 		if (data->exttype) {
 			status =  data->acpi_data.states[i].status;
@@ -1016,13 +1023,12 @@ static int get_transition_latency(struct powernow_k8_data *data)
 	}
 	if (max_latency == 0) {
 		/*
-		 * Fam 11h always returns 0 as transition latency.
-		 * This is intended and means "very fast". While cpufreq core
-		 * and governors currently can handle that gracefully, better
-		 * set it to 1 to avoid problems in the future.
-		 * For all others it's a BIOS bug.
+		 * Fam 11h and later may return 0 as transition latency. This
+		 * is intended and means "very fast". While cpufreq core and
+		 * governors currently can handle that gracefully, better set it
+		 * to 1 to avoid problems in the future.
 		 */
-		if (boot_cpu_data.x86 != 0x11)
+		if (boot_cpu_data.x86 < 0x11)
 			printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
 				"latency\n");
 		max_latency = 1;
@@ -1248,6 +1254,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
+	struct cpuinfo_x86 *c = &cpu_data(pol->cpu);
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1322,6 +1329,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		return -EINVAL;
 	}
 
+	/* Check for APERF/MPERF support in hardware */
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		cpufreq_amd64_driver.getavg = cpufreq_get_measured_perf;
+
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
@@ -1356,6 +1367,7 @@ static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
 
 	kfree(data->powernow_table);
 	kfree(data);
+	per_cpu(powernow_data, pol->cpu) = NULL;
 
 	return 0;
 }
@@ -1375,7 +1387,7 @@ static unsigned int powernowk8_get(unsigned int cpu)
 	int err;
 
 	if (!data)
-		return -EINVAL;
+		return 0;
 
 	smp_call_function_single(cpu, query_values_on_cpu, &err, true);
 	if (err)
@@ -1392,8 +1404,77 @@ out:
 	return khz;
 }
 
+static void _cpb_toggle_msrs(bool t)
+{
+	int cpu;
+
+	get_online_cpus();
+
+	rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+	for_each_cpu(cpu, cpu_online_mask) {
+		struct msr *reg = per_cpu_ptr(msrs, cpu);
+		if (t)
+			reg->l &= ~BIT(25);
+		else
+			reg->l |= BIT(25);
+	}
+	wrmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+	put_online_cpus();
+}
+
+/*
+ * Switch on/off core performance boosting.
+ *
+ * 0=disable
+ * 1=enable.
+ */
+static void cpb_toggle(bool t)
+{
+	if (!cpb_capable)
+		return;
+
+	if (t && !cpb_enabled) {
+		cpb_enabled = true;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting enabled.\n");
+	} else if (!t && cpb_enabled) {
+		cpb_enabled = false;
+		_cpb_toggle_msrs(t);
+		printk(KERN_INFO PFX "Core Boosting disabled.\n");
+	}
+}
+
+static ssize_t store_cpb(struct cpufreq_policy *policy, const char *buf,
+				 size_t count)
+{
+	int ret = -EINVAL;
+	unsigned long val = 0;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (!ret && (val == 0 || val == 1) && cpb_capable)
+		cpb_toggle(val);
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static ssize_t show_cpb(struct cpufreq_policy *policy, char *buf)
+{
+	return sprintf(buf, "%u\n", cpb_enabled);
+}
+
+#define define_one_rw(_name) \
+static struct freq_attr _name = \
+__ATTR(_name, 0644, show_##_name, store_##_name)
+
+define_one_rw(cpb);
+
 static struct freq_attr *powernow_k8_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
+	&cpb,
 	NULL,
 };
 
@@ -1409,10 +1490,51 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
 	.attr		= powernow_k8_attr,
 };
 
+/*
+ * Clear the boost-disable flag on the CPU_DOWN path so that this cpu
+ * cannot block the remaining ones from boosting. On the CPU_UP path we
+ * simply keep the boost-disable flag in sync with the current global
+ * state.
+ */
+static int cpb_notify(struct notifier_block *nb, unsigned long action,
+		      void *hcpu)
+{
+	unsigned cpu = (long)hcpu;
+	u32 lo, hi;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+
+		if (!cpb_enabled) {
+			rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
+			lo |= BIT(25);
+			wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
+		}
+		break;
+
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		rdmsr_on_cpu(cpu, MSR_K7_HWCR, &lo, &hi);
+		lo &= ~BIT(25);
+		wrmsr_on_cpu(cpu, MSR_K7_HWCR, lo, hi);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpb_nb = {
+	.notifier_call		= cpb_notify,
+};
+
 /* driver entry point for init */
 static int __cpuinit powernowk8_init(void)
 {
-	unsigned int i, supported_cpus = 0;
+	unsigned int i, supported_cpus = 0, cpu;
 
 	for_each_online_cpu(i) {
 		int rc;
@@ -1421,15 +1543,36 @@ static int __cpuinit powernowk8_init(void)
 			supported_cpus++;
 	}
 
-	if (supported_cpus == num_online_cpus()) {
-		printk(KERN_INFO PFX "Found %d %s "
-			"processors (%d cpu cores) (" VERSION ")\n",
-			num_online_nodes(),
-			boot_cpu_data.x86_model_id, supported_cpus);
-		return cpufreq_register_driver(&cpufreq_amd64_driver);
+	if (supported_cpus != num_online_cpus())
+		return -ENODEV;
+
+	printk(KERN_INFO PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
+		num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
+
+	if (boot_cpu_has(X86_FEATURE_CPB)) {
+
+		cpb_capable = true;
+
+		register_cpu_notifier(&cpb_nb);
+
+		msrs = msrs_alloc();
+		if (!msrs) {
+			printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
+			return -ENOMEM;
+		}
+
+		rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
+
+		for_each_cpu(cpu, cpu_online_mask) {
+			struct msr *reg = per_cpu_ptr(msrs, cpu);
+			cpb_enabled |= !(!!(reg->l & BIT(25)));
+		}
+
+		printk(KERN_INFO PFX "Core Performance Boosting: %s.\n",
+			(cpb_enabled ? "on" : "off"));
 	}
 
-	return -ENODEV;
+	return cpufreq_register_driver(&cpufreq_amd64_driver);
 }
 
 /* driver entry point for term */
@@ -1437,6 +1580,13 @@ static void __exit powernowk8_exit(void)
 {
 	dprintk("exit\n");
 
+	if (boot_cpu_has(X86_FEATURE_CPB)) {
+		msrs_free(msrs);
+		msrs = NULL;
+
+		unregister_cpu_notifier(&cpb_nb);
+	}
+
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index 02ce824..df3529b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -5,7 +5,6 @@
  *  http://www.gnu.org/licenses/gpl.html
  */
 
-
 enum pstate {
 	HW_PSTATE_INVALID = 0xff,
 	HW_PSTATE_0 = 0,
@@ -55,7 +54,6 @@ struct powernow_k8_data {
 	struct cpumask *available_cores;
 };
 
-
 /* processor's cpuid instruction support */
 #define CPUID_PROCESSOR_SIGNATURE	1	/* function 1 */
 #define CPUID_XFAM			0x0ff00000	/* extended family */
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 8d672ef..9b1ff37 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>	/* current */
 #include <linux/delay.h>
 #include <linux/compiler.h>
+#include <linux/gfp.h>
 
 #include <asm/msr.h>
 #include <asm/processor.h>
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 2ce8e0b..561758e 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/sched.h>
 
 #include "speedstep-lib.h"
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index ad0083a..a94ec6b 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -13,7 +13,6 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 
 #include <asm/msr.h>
 #include <asm/tsc.h>
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index 04d73c1..8abd869 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -17,7 +17,6 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <asm/ist.h>
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 08be922..dd531cc 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -21,37 +21,55 @@
  *
  */
 
+#include <linux/module.h>
 #include <asm/processor.h>
-#include <asm/vmware.h>
 #include <asm/hypervisor.h>
 
-static inline void __cpuinit
-detect_hypervisor_vendor(struct cpuinfo_x86 *c)
+/*
+ * Hypervisor detect order.  This is specified explicitly here because
+ * some hypervisors might implement compatibility modes for other
+ * hypervisors and therefore need to be detected in specific sequence.
+ */
+static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
-	if (vmware_platform())
-		c->x86_hyper_vendor = X86_HYPER_VENDOR_VMWARE;
-	else
-		c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE;
-}
+	&x86_hyper_vmware,
+	&x86_hyper_ms_hyperv,
+};
 
-static inline void __cpuinit
-hypervisor_set_feature_bits(struct cpuinfo_x86 *c)
+const struct hypervisor_x86 *x86_hyper;
+EXPORT_SYMBOL(x86_hyper);
+
+static inline void __init
+detect_hypervisor_vendor(void)
 {
-	if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE) {
-		vmware_set_feature_bits(c);
-		return;
+	const struct hypervisor_x86 *h, * const *p;
+
+	for (p = hypervisors; p < hypervisors + ARRAY_SIZE(hypervisors); p++) {
+		h = *p;
+		if (h->detect()) {
+			x86_hyper = h;
+			printk(KERN_INFO "Hypervisor detected: %s\n", h->name);
+			break;
+		}
 	}
 }
 
 void __cpuinit init_hypervisor(struct cpuinfo_x86 *c)
 {
-	detect_hypervisor_vendor(c);
-	hypervisor_set_feature_bits(c);
+	if (x86_hyper && x86_hyper->set_cpu_features)
+		x86_hyper->set_cpu_features(c);
 }
 
 void __init init_hypervisor_platform(void)
 {
+
+	detect_hypervisor_vendor();
+
+	if (!x86_hyper)
+		return;
+
 	init_hypervisor(&boot_cpu_data);
-	if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE)
-		vmware_platform_setup();
+
+	if (x86_hyper->init_platform)
+		x86_hyper->init_platform();
 }
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 879666f..85f69cd 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -12,7 +12,6 @@
 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/msr.h>
-#include <asm/ds.h>
 #include <asm/bugs.h>
 #include <asm/cpu.h>
 
@@ -47,6 +46,27 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 
+	/*
+	 * Atom erratum AAE44/AAF40/AAG38/AAH41:
+	 *
+	 * A race condition between speculative fetches and invalidating
+	 * a large page.  This is worked around in microcode, but we
+	 * need the microcode to have already been loaded... so if it is
+	 * not, recommend a BIOS update and disable large pages.
+	 */
+	if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) {
+		u32 ucode, junk;
+
+		wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+		sync_core();
+		rdmsr(MSR_IA32_UCODE_REV, junk, ucode);
+
+		if (ucode < 0x20e) {
+			printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
+			clear_cpu_cap(c, X86_FEATURE_PSE);
+		}
+	}
+
 #ifdef CONFIG_X86_64
 	set_cpu_cap(c, X86_FEATURE_SYSENTER32);
 #else
@@ -70,7 +90,8 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
-		sched_clock_stable = 1;
+		if (!check_tsc_unstable())
+			sched_clock_stable = 1;
 	}
 
 	/*
@@ -351,12 +372,6 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}
 
-	if (c->cpuid_level > 6) {
-		unsigned ecx = cpuid_ecx(6);
-		if (ecx & 0x01)
-			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
-	}
-
 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	if (cpu_has_ds) {
@@ -366,7 +381,6 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_BTS);
 		if (!(l1 & (1<<12)))
 			set_cpu_cap(c, X86_FEATURE_PEBS);
-		ds_init_intel(c);
 	}
 
 	if (c->x86 == 6 && c->x86_model == 29 && cpu_has_clflush)
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index fc6c8ef..33eae20 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -18,6 +18,7 @@
 #include <asm/processor.h>
 #include <linux/smp.h>
 #include <asm/k8.h>
+#include <asm/smp.h>
 
 #define LVL_1_INST	1
 #define LVL_1_DATA	2
@@ -31,6 +32,8 @@ struct _cache_table {
 	short size;
 };
 
+#define MB(x)	((x) * 1024)
+
 /* All the cache descriptor types we care about (no TLB or
    trace cache entries) */
 
@@ -44,9 +47,9 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x0d, LVL_1_DATA, 16 },	/* 4-way set assoc, 64 byte line size */
 	{ 0x21, LVL_2,      256 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x22, LVL_3,      512 },	/* 4-way set assoc, sectored cache, 64 byte line size */
-	{ 0x23, LVL_3,      1024 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x25, LVL_3,      2048 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x29, LVL_3,      4096 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x23, LVL_3,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x25, LVL_3,      MB(2) },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x29, LVL_3,      MB(4) },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x2c, LVL_1_DATA, 32 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x30, LVL_1_INST, 32 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x39, LVL_2,      128 },	/* 4-way set assoc, sectored cache, 64 byte line size */
@@ -59,16 +62,16 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x41, LVL_2,      128 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x42, LVL_2,      256 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x43, LVL_2,      512 },	/* 4-way set assoc, 32 byte line size */
-	{ 0x44, LVL_2,      1024 },	/* 4-way set assoc, 32 byte line size */
-	{ 0x45, LVL_2,      2048 },	/* 4-way set assoc, 32 byte line size */
-	{ 0x46, LVL_3,      4096 },	/* 4-way set assoc, 64 byte line size */
-	{ 0x47, LVL_3,      8192 },	/* 8-way set assoc, 64 byte line size */
-	{ 0x49, LVL_3,      4096 },	/* 16-way set assoc, 64 byte line size */
-	{ 0x4a, LVL_3,      6144 },	/* 12-way set assoc, 64 byte line size */
-	{ 0x4b, LVL_3,      8192 },	/* 16-way set assoc, 64 byte line size */
-	{ 0x4c, LVL_3,     12288 },	/* 12-way set assoc, 64 byte line size */
-	{ 0x4d, LVL_3,     16384 },	/* 16-way set assoc, 64 byte line size */
-	{ 0x4e, LVL_2,      6144 },	/* 24-way set assoc, 64 byte line size */
+	{ 0x44, LVL_2,      MB(1) },	/* 4-way set assoc, 32 byte line size */
+	{ 0x45, LVL_2,      MB(2) },	/* 4-way set assoc, 32 byte line size */
+	{ 0x46, LVL_3,      MB(4) },	/* 4-way set assoc, 64 byte line size */
+	{ 0x47, LVL_3,      MB(8) },	/* 8-way set assoc, 64 byte line size */
+	{ 0x49, LVL_3,      MB(4) },	/* 16-way set assoc, 64 byte line size */
+	{ 0x4a, LVL_3,      MB(6) },	/* 12-way set assoc, 64 byte line size */
+	{ 0x4b, LVL_3,      MB(8) },	/* 16-way set assoc, 64 byte line size */
+	{ 0x4c, LVL_3,      MB(12) },	/* 12-way set assoc, 64 byte line size */
+	{ 0x4d, LVL_3,      MB(16) },	/* 16-way set assoc, 64 byte line size */
+	{ 0x4e, LVL_2,      MB(6) },	/* 24-way set assoc, 64 byte line size */
 	{ 0x60, LVL_1_DATA, 16 },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x66, LVL_1_DATA, 8 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x67, LVL_1_DATA, 16 },	/* 4-way set assoc, sectored cache, 64 byte line size */
@@ -77,34 +80,34 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x71, LVL_TRACE,  16 },	/* 8-way set assoc */
 	{ 0x72, LVL_TRACE,  32 },	/* 8-way set assoc */
 	{ 0x73, LVL_TRACE,  64 },	/* 8-way set assoc */
-	{ 0x78, LVL_2,    1024 },	/* 4-way set assoc, 64 byte line size */
-	{ 0x79, LVL_2,     128 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x7a, LVL_2,     256 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x7b, LVL_2,     512 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x7c, LVL_2,    1024 },	/* 8-way set assoc, sectored cache, 64 byte line size */
-	{ 0x7d, LVL_2,    2048 },	/* 8-way set assoc, 64 byte line size */
-	{ 0x7f, LVL_2,     512 },	/* 2-way set assoc, 64 byte line size */
-	{ 0x82, LVL_2,     256 },	/* 8-way set assoc, 32 byte line size */
-	{ 0x83, LVL_2,     512 },	/* 8-way set assoc, 32 byte line size */
-	{ 0x84, LVL_2,    1024 },	/* 8-way set assoc, 32 byte line size */
-	{ 0x85, LVL_2,    2048 },	/* 8-way set assoc, 32 byte line size */
-	{ 0x86, LVL_2,     512 },	/* 4-way set assoc, 64 byte line size */
-	{ 0x87, LVL_2,    1024 },	/* 8-way set assoc, 64 byte line size */
-	{ 0xd0, LVL_3,     512 },	/* 4-way set assoc, 64 byte line size */
-	{ 0xd1, LVL_3,    1024 },	/* 4-way set assoc, 64 byte line size */
-	{ 0xd2, LVL_3,    2048 },	/* 4-way set assoc, 64 byte line size */
-	{ 0xd6, LVL_3,    1024 },	/* 8-way set assoc, 64 byte line size */
-	{ 0xd7, LVL_3,    2048 },	/* 8-way set assoc, 64 byte line size */
-	{ 0xd8, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
-	{ 0xdc, LVL_3,    2048 },	/* 12-way set assoc, 64 byte line size */
-	{ 0xdd, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
-	{ 0xde, LVL_3,    8192 },	/* 12-way set assoc, 64 byte line size */
-	{ 0xe2, LVL_3,    2048 },	/* 16-way set assoc, 64 byte line size */
-	{ 0xe3, LVL_3,    4096 },	/* 16-way set assoc, 64 byte line size */
-	{ 0xe4, LVL_3,    8192 },	/* 16-way set assoc, 64 byte line size */
-	{ 0xea, LVL_3,    12288 },	/* 24-way set assoc, 64 byte line size */
-	{ 0xeb, LVL_3,    18432 },	/* 24-way set assoc, 64 byte line size */
-	{ 0xec, LVL_3,    24576 },	/* 24-way set assoc, 64 byte line size */
+	{ 0x78, LVL_2,      MB(1) },	/* 4-way set assoc, 64 byte line size */
+	{ 0x79, LVL_2,      128 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7a, LVL_2,      256 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7b, LVL_2,      512 },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7c, LVL_2,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
+	{ 0x7d, LVL_2,      MB(2) },	/* 8-way set assoc, 64 byte line size */
+	{ 0x7f, LVL_2,      512 },	/* 2-way set assoc, 64 byte line size */
+	{ 0x82, LVL_2,      256 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x83, LVL_2,      512 },	/* 8-way set assoc, 32 byte line size */
+	{ 0x84, LVL_2,      MB(1) },	/* 8-way set assoc, 32 byte line size */
+	{ 0x85, LVL_2,      MB(2) },	/* 8-way set assoc, 32 byte line size */
+	{ 0x86, LVL_2,      512 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x87, LVL_2,      MB(1) },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd0, LVL_3,      512 },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd1, LVL_3,      MB(1) },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd2, LVL_3,      MB(2) },	/* 4-way set assoc, 64 byte line size */
+	{ 0xd6, LVL_3,      MB(1) },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd7, LVL_3,      MB(2) },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd8, LVL_3,      MB(4) },	/* 12-way set assoc, 64 byte line size */
+	{ 0xdc, LVL_3,      MB(2) },	/* 12-way set assoc, 64 byte line size */
+	{ 0xdd, LVL_3,      MB(4) },	/* 12-way set assoc, 64 byte line size */
+	{ 0xde, LVL_3,      MB(8) },	/* 12-way set assoc, 64 byte line size */
+	{ 0xe2, LVL_3,      MB(2) },	/* 16-way set assoc, 64 byte line size */
+	{ 0xe3, LVL_3,      MB(4) },	/* 16-way set assoc, 64 byte line size */
+	{ 0xe4, LVL_3,      MB(8) },	/* 16-way set assoc, 64 byte line size */
+	{ 0xea, LVL_3,      MB(12) },	/* 24-way set assoc, 64 byte line size */
+	{ 0xeb, LVL_3,      MB(18) },	/* 24-way set assoc, 64 byte line size */
+	{ 0xec, LVL_3,      MB(24) },	/* 24-way set assoc, 64 byte line size */
 	{ 0x00, 0, 0}
 };
 
@@ -145,12 +148,19 @@ union _cpuid4_leaf_ecx {
 	u32 full;
 };
 
+struct amd_l3_cache {
+	struct	 pci_dev *dev;
+	bool	 can_disable;
+	unsigned indices;
+	u8	 subcaches[4];
+};
+
 struct _cpuid4_info {
 	union _cpuid4_leaf_eax eax;
 	union _cpuid4_leaf_ebx ebx;
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
-	unsigned long can_disable;
+	struct amd_l3_cache *l3;
 	DECLARE_BITMAP(shared_cpu_map, NR_CPUS);
 };
 
@@ -160,7 +170,7 @@ struct _cpuid4_info_regs {
 	union _cpuid4_leaf_ebx ebx;
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
-	unsigned long can_disable;
+	struct amd_l3_cache *l3;
 };
 
 unsigned short			num_cache_leaves;
@@ -290,22 +300,213 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 		(ebx->split.ways_of_associativity + 1) - 1;
 }
 
+struct _cache_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct _cpuid4_info *, char *);
+	ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#ifdef CONFIG_CPU_SUP_AMD
+
+/*
+ * L3 cache descriptors
+ */
+static struct amd_l3_cache **__cpuinitdata l3_caches;
+
+static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3)
+{
+	unsigned int sc0, sc1, sc2, sc3;
+	u32 val = 0;
+
+	pci_read_config_dword(l3->dev, 0x1C4, &val);
+
+	/* calculate subcache sizes */
+	l3->subcaches[0] = sc0 = !(val & BIT(0));
+	l3->subcaches[1] = sc1 = !(val & BIT(4));
+	l3->subcaches[2] = sc2 = !(val & BIT(8))  + !(val & BIT(9));
+	l3->subcaches[3] = sc3 = !(val & BIT(12)) + !(val & BIT(13));
+
+	l3->indices = (max(max(max(sc0, sc1), sc2), sc3) << 10) - 1;
+}
+
+static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node)
+{
+	struct amd_l3_cache *l3;
+	struct pci_dev *dev = node_to_k8_nb_misc(node);
+
+	l3 = kzalloc(sizeof(struct amd_l3_cache), GFP_ATOMIC);
+	if (!l3) {
+		printk(KERN_WARNING "Error allocating L3 struct\n");
+		return NULL;
+	}
+
+	l3->dev = dev;
+
+	amd_calc_l3_indices(l3);
+
+	return l3;
+}
+
 static void __cpuinit
 amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
 {
+	int node;
+
+	if (boot_cpu_data.x86 != 0x10)
+		return;
+
 	if (index < 3)
 		return;
 
-	if (boot_cpu_data.x86 == 0x11)
+	/* see errata #382 and #388 */
+	if (boot_cpu_data.x86_model < 0x8)
 		return;
 
-	/* see erratum #382 */
-	if ((boot_cpu_data.x86 == 0x10) && (boot_cpu_data.x86_model < 0x8))
+	if ((boot_cpu_data.x86_model == 0x8 ||
+	     boot_cpu_data.x86_model == 0x9)
+		&&
+	     boot_cpu_data.x86_mask < 0x1)
+			return;
+
+	/* not in virtualized environments */
+	if (num_k8_northbridges == 0)
 		return;
 
-	this_leaf->can_disable = 1;
+	/*
+	 * Strictly speaking, the amount in @size below is leaked since it is
+	 * never freed but this is done only on shutdown so it doesn't matter.
+	 */
+	if (!l3_caches) {
+		int size = num_k8_northbridges * sizeof(struct amd_l3_cache *);
+
+		l3_caches = kzalloc(size, GFP_ATOMIC);
+		if (!l3_caches)
+			return;
+	}
+
+	node = amd_get_nb_id(smp_processor_id());
+
+	if (!l3_caches[node]) {
+		l3_caches[node] = amd_init_l3_cache(node);
+		l3_caches[node]->can_disable = true;
+	}
+
+	WARN_ON(!l3_caches[node]);
+
+	this_leaf->l3 = l3_caches[node];
 }
 
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
+				  unsigned int slot)
+{
+	struct pci_dev *dev = this_leaf->l3->dev;
+	unsigned int reg = 0;
+
+	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
+		return -EINVAL;
+
+	if (!dev)
+		return -EINVAL;
+
+	pci_read_config_dword(dev, 0x1BC + slot * 4, &reg);
+	return sprintf(buf, "0x%08x\n", reg);
+}
+
+#define SHOW_CACHE_DISABLE(slot)					\
+static ssize_t								\
+show_cache_disable_##slot(struct _cpuid4_info *this_leaf, char *buf)	\
+{									\
+	return show_cache_disable(this_leaf, buf, slot);		\
+}
+SHOW_CACHE_DISABLE(0)
+SHOW_CACHE_DISABLE(1)
+
+static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu,
+				 unsigned slot, unsigned long idx)
+{
+	int i;
+
+	idx |= BIT(30);
+
+	/*
+	 *  disable index in all 4 subcaches
+	 */
+	for (i = 0; i < 4; i++) {
+		u32 reg = idx | (i << 20);
+
+		if (!l3->subcaches[i])
+			continue;
+
+		pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg);
+
+		/*
+		 * We need to WBINVD on a core on the node containing the L3
+		 * cache which indices we disable therefore a simple wbinvd()
+		 * is not sufficient.
+		 */
+		wbinvd_on_cpu(cpu);
+
+		reg |= BIT(31);
+		pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg);
+	}
+}
+
+
+static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
+				   const char *buf, size_t count,
+				   unsigned int slot)
+{
+	struct pci_dev *dev = this_leaf->l3->dev;
+	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+	unsigned long val = 0;
+
+#define SUBCACHE_MASK	(3UL << 20)
+#define SUBCACHE_INDEX	0xfff
+
+	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
+		return -EINVAL;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (!dev)
+		return -EINVAL;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	/* do not allow writes outside of allowed bits */
+	if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
+	    ((val & SUBCACHE_INDEX) > this_leaf->l3->indices))
+		return -EINVAL;
+
+	amd_l3_disable_index(this_leaf->l3, cpu, slot, val);
+
+	return count;
+}
+
+#define STORE_CACHE_DISABLE(slot)					\
+static ssize_t								\
+store_cache_disable_##slot(struct _cpuid4_info *this_leaf,		\
+			    const char *buf, size_t count)		\
+{									\
+	return store_cache_disable(this_leaf, buf, count, slot);	\
+}
+STORE_CACHE_DISABLE(0)
+STORE_CACHE_DISABLE(1)
+
+static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
+		show_cache_disable_0, store_cache_disable_0);
+static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
+		show_cache_disable_1, store_cache_disable_1);
+
+#else	/* CONFIG_CPU_SUP_AMD */
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
+{
+};
+#endif /* CONFIG_CPU_SUP_AMD */
+
 static int
 __cpuinit cpuid4_cache_lookup_regs(int index,
 				   struct _cpuid4_info_regs *this_leaf)
@@ -317,8 +518,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index,
 
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		amd_cpuid4(index, &eax, &ebx, &ecx);
-		if (boot_cpu_data.x86 >= 0x10)
-			amd_check_l3_disable(index, this_leaf);
+		amd_check_l3_disable(index, this_leaf);
 	} else {
 		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
 	}
@@ -575,6 +775,7 @@ static void __cpuinit free_cache_attributes(unsigned int cpu)
 	for (i = 0; i < num_cache_leaves; i++)
 		cache_remove_shared_cpu_map(cpu, i);
 
+	kfree(per_cpu(ici_cpuid4_info, cpu)->l3);
 	kfree(per_cpu(ici_cpuid4_info, cpu));
 	per_cpu(ici_cpuid4_info, cpu) = NULL;
 }
@@ -711,82 +912,6 @@ static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf)
 #define to_object(k)	container_of(k, struct _index_kobject, kobj)
 #define to_attr(a)	container_of(a, struct _cache_attr, attr)
 
-static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
-				  unsigned int index)
-{
-	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
-	int node = cpu_to_node(cpu);
-	struct pci_dev *dev = node_to_k8_nb_misc(node);
-	unsigned int reg = 0;
-
-	if (!this_leaf->can_disable)
-		return -EINVAL;
-
-	if (!dev)
-		return -EINVAL;
-
-	pci_read_config_dword(dev, 0x1BC + index * 4, &reg);
-	return sprintf(buf, "%x\n", reg);
-}
-
-#define SHOW_CACHE_DISABLE(index)					\
-static ssize_t								\
-show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf)  	\
-{									\
-	return show_cache_disable(this_leaf, buf, index);		\
-}
-SHOW_CACHE_DISABLE(0)
-SHOW_CACHE_DISABLE(1)
-
-static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
-	const char *buf, size_t count, unsigned int index)
-{
-	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
-	int node = cpu_to_node(cpu);
-	struct pci_dev *dev = node_to_k8_nb_misc(node);
-	unsigned long val = 0;
-	unsigned int scrubber = 0;
-
-	if (!this_leaf->can_disable)
-		return -EINVAL;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	if (!dev)
-		return -EINVAL;
-
-	if (strict_strtoul(buf, 10, &val) < 0)
-		return -EINVAL;
-
-	val |= 0xc0000000;
-
-	pci_read_config_dword(dev, 0x58, &scrubber);
-	scrubber &= ~0x1f000000;
-	pci_write_config_dword(dev, 0x58, scrubber);
-
-	pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
-	wbinvd();
-	pci_write_config_dword(dev, 0x1BC + index * 4, val);
-	return count;
-}
-
-#define STORE_CACHE_DISABLE(index)					\
-static ssize_t								\
-store_cache_disable_##index(struct _cpuid4_info *this_leaf,	     	\
-			    const char *buf, size_t count)		\
-{									\
-	return store_cache_disable(this_leaf, buf, count, index);	\
-}
-STORE_CACHE_DISABLE(0)
-STORE_CACHE_DISABLE(1)
-
-struct _cache_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct _cpuid4_info *, char *);
-	ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
-};
-
 #define define_one_ro(_name) \
 static struct _cache_attr _name = \
 	__ATTR(_name, 0444, show_##_name, NULL)
@@ -801,23 +926,28 @@ define_one_ro(size);
 define_one_ro(shared_cpu_map);
 define_one_ro(shared_cpu_list);
 
-static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
-		show_cache_disable_0, store_cache_disable_0);
-static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
-		show_cache_disable_1, store_cache_disable_1);
+#define DEFAULT_SYSFS_CACHE_ATTRS	\
+	&type.attr,			\
+	&level.attr,			\
+	&coherency_line_size.attr,	\
+	&physical_line_partition.attr,	\
+	&ways_of_associativity.attr,	\
+	&number_of_sets.attr,		\
+	&size.attr,			\
+	&shared_cpu_map.attr,		\
+	&shared_cpu_list.attr
 
 static struct attribute *default_attrs[] = {
-	&type.attr,
-	&level.attr,
-	&coherency_line_size.attr,
-	&physical_line_partition.attr,
-	&ways_of_associativity.attr,
-	&number_of_sets.attr,
-	&size.attr,
-	&shared_cpu_map.attr,
-	&shared_cpu_list.attr,
+	DEFAULT_SYSFS_CACHE_ATTRS,
+	NULL
+};
+
+static struct attribute *default_l3_attrs[] = {
+	DEFAULT_SYSFS_CACHE_ATTRS,
+#ifdef CONFIG_CPU_SUP_AMD
 	&cache_disable_0.attr,
 	&cache_disable_1.attr,
+#endif
 	NULL
 };
 
@@ -848,7 +978,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops sysfs_ops = {
+static const struct sysfs_ops sysfs_ops = {
 	.show   = show,
 	.store  = store,
 };
@@ -908,6 +1038,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	unsigned int cpu = sys_dev->id;
 	unsigned long i, j;
 	struct _index_kobject *this_object;
+	struct _cpuid4_info   *this_leaf;
 	int retval;
 
 	retval = cpuid4_cache_sysfs_init(cpu);
@@ -926,6 +1057,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 		this_object = INDEX_KOBJECT_PTR(cpu, i);
 		this_object->cpu = cpu;
 		this_object->index = i;
+
+		this_leaf = CPUID4_INFO_IDX(cpu, i);
+
+		if (this_leaf->l3 && this_leaf->l3->can_disable)
+			ktype_cache.default_attrs = default_l3_attrs;
+		else
+			ktype_cache.default_attrs = default_attrs;
+
 		retval = kobject_init_and_add(&(this_object->kobj),
 					      &ktype_cache,
 					      per_cpu(ici_cache_kobject, cpu),
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 4ac6d48..bb34b03 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
 
 obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o
+
+obj-$(CONFIG_ACPI_APEI)		+= mce-apei.o
diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
new file mode 100644
index 0000000..745b54f
--- /dev/null
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -0,0 +1,138 @@
+/*
+ * Bridge between MCE and APEI
+ *
+ * On some machine, corrected memory errors are reported via APEI
+ * generic hardware error source (GHES) instead of corrected Machine
+ * Check. These corrected memory errors can be reported to user space
+ * through /dev/mcelog via faking a corrected Machine Check, so that
+ * the error memory page can be offlined by /sbin/mcelog if the error
+ * count for one page is beyond the threshold.
+ *
+ * For fatal MCE, save MCE record into persistent storage via ERST, so
+ * that the MCE record can be logged after reboot via ERST.
+ *
+ * Copyright 2010 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/cper.h>
+#include <acpi/apei.h>
+#include <asm/mce.h>
+
+#include "mce-internal.h"
+
+void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err)
+{
+	struct mce m;
+
+	/* Only corrected MC is reported */
+	if (!corrected)
+		return;
+
+	mce_setup(&m);
+	m.bank = 1;
+	/* Fake a memory read corrected error with unknown channel */
+	m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | 0x9f;
+	m.addr = mem_err->physical_addr;
+	mce_log(&m);
+	mce_notify_irq();
+}
+EXPORT_SYMBOL_GPL(apei_mce_report_mem_error);
+
+#define CPER_CREATOR_MCE						\
+	UUID_LE(0x75a574e3, 0x5052, 0x4b29, 0x8a, 0x8e, 0xbe, 0x2c,	\
+		0x64, 0x90, 0xb8, 0x9d)
+#define CPER_SECTION_TYPE_MCE						\
+	UUID_LE(0xfe08ffbe, 0x95e4, 0x4be7, 0xbc, 0x73, 0x40, 0x96,	\
+		0x04, 0x4a, 0x38, 0xfc)
+
+/*
+ * CPER specification (in UEFI specification 2.3 appendix N) requires
+ * byte-packed.
+ */
+struct cper_mce_record {
+	struct cper_record_header hdr;
+	struct cper_section_descriptor sec_hdr;
+	struct mce mce;
+} __packed;
+
+int apei_write_mce(struct mce *m)
+{
+	struct cper_mce_record rcd;
+
+	memset(&rcd, 0, sizeof(rcd));
+	memcpy(rcd.hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE);
+	rcd.hdr.revision = CPER_RECORD_REV;
+	rcd.hdr.signature_end = CPER_SIG_END;
+	rcd.hdr.section_count = 1;
+	rcd.hdr.error_severity = CPER_SER_FATAL;
+	/* timestamp, platform_id, partition_id are all invalid */
+	rcd.hdr.validation_bits = 0;
+	rcd.hdr.record_length = sizeof(rcd);
+	rcd.hdr.creator_id = CPER_CREATOR_MCE;
+	rcd.hdr.notification_type = CPER_NOTIFY_MCE;
+	rcd.hdr.record_id = cper_next_record_id();
+	rcd.hdr.flags = CPER_HW_ERROR_FLAGS_PREVERR;
+
+	rcd.sec_hdr.section_offset = (void *)&rcd.mce - (void *)&rcd;
+	rcd.sec_hdr.section_length = sizeof(rcd.mce);
+	rcd.sec_hdr.revision = CPER_SEC_REV;
+	/* fru_id and fru_text is invalid */
+	rcd.sec_hdr.validation_bits = 0;
+	rcd.sec_hdr.flags = CPER_SEC_PRIMARY;
+	rcd.sec_hdr.section_type = CPER_SECTION_TYPE_MCE;
+	rcd.sec_hdr.section_severity = CPER_SER_FATAL;
+
+	memcpy(&rcd.mce, m, sizeof(*m));
+
+	return erst_write(&rcd.hdr);
+}
+
+ssize_t apei_read_mce(struct mce *m, u64 *record_id)
+{
+	struct cper_mce_record rcd;
+	ssize_t len;
+
+	len = erst_read_next(&rcd.hdr, sizeof(rcd));
+	if (len <= 0)
+		return len;
+	/* Can not skip other records in storage via ERST unless clear them */
+	else if (len != sizeof(rcd) ||
+		 uuid_le_cmp(rcd.hdr.creator_id, CPER_CREATOR_MCE)) {
+		if (printk_ratelimit())
+			pr_warning(
+			"MCE-APEI: Can not skip the unknown record in ERST");
+		return -EIO;
+	}
+
+	memcpy(m, &rcd.mce, sizeof(*m));
+	*record_id = rcd.hdr.record_id;
+
+	return sizeof(*m);
+}
+
+/* Check whether there is record in ERST */
+int apei_check_mce(void)
+{
+	return erst_get_record_count();
+}
+
+int apei_clear_mce(u64 record_id)
+{
+	return erst_clear(record_id);
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 73734ba..e7dbde7 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -22,6 +22,7 @@
 #include <linux/kdebug.h>
 #include <linux/cpu.h>
 #include <linux/sched.h>
+#include <linux/gfp.h>
 #include <asm/mce.h>
 #include <asm/apic.h>
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 32996f9..fefcc69 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -28,3 +28,26 @@ extern int mce_ser;
 
 extern struct mce_bank *mce_banks;
 
+#ifdef CONFIG_ACPI_APEI
+int apei_write_mce(struct mce *m);
+ssize_t apei_read_mce(struct mce *m, u64 *record_id);
+int apei_check_mce(void);
+int apei_clear_mce(u64 record_id);
+#else
+static inline int apei_write_mce(struct mce *m)
+{
+	return -EINVAL;
+}
+static inline ssize_t apei_read_mce(struct mce *m, u64 *record_id)
+{
+	return 0;
+}
+static inline int apei_check_mce(void)
+{
+	return 0;
+}
+static inline int apei_clear_mce(u64 record_id)
+{
+	return -EINVAL;
+}
+#endif
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index a8aacd4..18cc425 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -26,6 +26,7 @@
 #include <linux/sched.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/poll.h>
@@ -35,6 +36,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
+#include <linux/edac_mce.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
@@ -46,6 +48,13 @@
 
 #include "mce-internal.h"
 
+static DEFINE_MUTEX(mce_read_mutex);
+
+#define rcu_dereference_check_mce(p) \
+	rcu_dereference_check((p), \
+			      rcu_read_lock_sched_held() || \
+			      lockdep_is_held(&mce_read_mutex))
+
 #define CREATE_TRACE_POINTS
 #include <trace/events/mce.h>
 
@@ -158,9 +167,18 @@ void mce_log(struct mce *mce)
 	mce->finished = 0;
 	wmb();
 	for (;;) {
-		entry = rcu_dereference(mcelog.next);
+		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
 			/*
+			 * If edac_mce is enabled, it will check the error type
+			 * and will process it, if it is a known error.
+			 * Otherwise, the error will be sent through mcelog
+			 * interface
+			 */
+			if (edac_mce_parse(mce))
+				return;
+
+			/*
 			 * When the buffer fills up discard new entries.
 			 * Assume that the earlier errors are the more
 			 * interesting ones:
@@ -256,7 +274,7 @@ static void wait_for_panic(void)
 
 static void mce_panic(char *msg, struct mce *final, char *exp)
 {
-	int i;
+	int i, apei_err = 0;
 
 	if (!fake_panic) {
 		/*
@@ -279,8 +297,11 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 		struct mce *m = &mcelog.entry[i];
 		if (!(m->status & MCI_STATUS_VAL))
 			continue;
-		if (!(m->status & MCI_STATUS_UC))
+		if (!(m->status & MCI_STATUS_UC)) {
 			print_mce(m);
+			if (!apei_err)
+				apei_err = apei_write_mce(m);
+		}
 	}
 	/* Now print uncorrected but with the final one last */
 	for (i = 0; i < MCE_LOG_LEN; i++) {
@@ -289,11 +310,17 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 			continue;
 		if (!(m->status & MCI_STATUS_UC))
 			continue;
-		if (!final || memcmp(m, final, sizeof(struct mce)))
+		if (!final || memcmp(m, final, sizeof(struct mce))) {
 			print_mce(m);
+			if (!apei_err)
+				apei_err = apei_write_mce(m);
+		}
 	}
-	if (final)
+	if (final) {
 		print_mce(final);
+		if (!apei_err)
+			apei_err = apei_write_mce(final);
+	}
 	if (cpu_missing)
 		printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
 	print_mce_tail();
@@ -531,7 +558,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 	struct mce m;
 	int i;
 
-	__get_cpu_var(mce_poll_count)++;
+	percpu_inc(mce_poll_count);
 
 	mce_setup(&m);
 
@@ -926,7 +953,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 
 	atomic_inc(&mce_entry);
 
-	__get_cpu_var(mce_exception_count)++;
+	percpu_inc(mce_exception_count);
 
 	if (notify_die(DIE_NMI, "machine check", regs, error_code,
 			   18, SIGKILL) == NOTIFY_STOP)
@@ -1485,7 +1512,42 @@ static void collect_tscs(void *data)
 	rdtscll(cpu_tsc[smp_processor_id()]);
 }
 
-static DEFINE_MUTEX(mce_read_mutex);
+static int mce_apei_read_done;
+
+/* Collect MCE record of previous boot in persistent storage via APEI ERST. */
+static int __mce_read_apei(char __user **ubuf, size_t usize)
+{
+	int rc;
+	u64 record_id;
+	struct mce m;
+
+	if (usize < sizeof(struct mce))
+		return -EINVAL;
+
+	rc = apei_read_mce(&m, &record_id);
+	/* Error or no more MCE record */
+	if (rc <= 0) {
+		mce_apei_read_done = 1;
+		return rc;
+	}
+	rc = -EFAULT;
+	if (copy_to_user(*ubuf, &m, sizeof(struct mce)))
+		return rc;
+	/*
+	 * In fact, we should have cleared the record after that has
+	 * been flushed to the disk or sent to network in
+	 * /sbin/mcelog, but we have no interface to support that now,
+	 * so just clear it to avoid duplication.
+	 */
+	rc = apei_clear_mce(record_id);
+	if (rc) {
+		mce_apei_read_done = 1;
+		return rc;
+	}
+	*ubuf += sizeof(struct mce);
+
+	return 0;
+}
 
 static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 			loff_t *off)
@@ -1500,16 +1562,20 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 		return -ENOMEM;
 
 	mutex_lock(&mce_read_mutex);
-	next = rcu_dereference(mcelog.next);
 
-	/* Only supports full reads right now */
-	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) {
-		mutex_unlock(&mce_read_mutex);
-		kfree(cpu_tsc);
-
-		return -EINVAL;
+	if (!mce_apei_read_done) {
+		err = __mce_read_apei(&buf, usize);
+		if (err || buf != ubuf)
+			goto out;
 	}
 
+	next = rcu_dereference_check_mce(mcelog.next);
+
+	/* Only supports full reads right now */
+	err = -EINVAL;
+	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce))
+		goto out;
+
 	err = 0;
 	prev = 0;
 	do {
@@ -1556,16 +1622,23 @@ timeout:
 			memset(&mcelog.entry[i], 0, sizeof(struct mce));
 		}
 	}
+
+	if (err)
+		err = -EFAULT;
+
+out:
 	mutex_unlock(&mce_read_mutex);
 	kfree(cpu_tsc);
 
-	return err ? -EFAULT : buf - ubuf;
+	return err ? err : buf - ubuf;
 }
 
 static unsigned int mce_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
+	if (rcu_dereference_check_mce(mcelog.next))
+		return POLLIN | POLLRDNORM;
+	if (!mce_apei_read_done && apei_check_mce())
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
@@ -2044,6 +2117,7 @@ static __init void mce_init_banks(void)
 		struct mce_bank *b = &mce_banks[i];
 		struct sysdev_attribute *a = &b->attr;
 
+		sysfs_attr_init(&a->attr);
 		a->attr.name	= b->attrname;
 		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 83a3d1f..224392d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/sysfs.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -388,7 +389,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	return ret;
 }
 
-static struct sysfs_ops threshold_ops = {
+static const struct sysfs_ops threshold_ops = {
 	.show			= show,
 	.store			= store,
 };
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 7c78563..62b48e4 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -5,6 +5,7 @@
  * Author: Andi Kleen
  */
 
+#include <linux/gfp.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
@@ -95,7 +96,7 @@ static void cmci_discover(int banks, int boot)
 
 		/* Already owned by someone else? */
 		if (val & CMCI_EN) {
-			if (test_and_clear_bit(i, owned) || boot)
+			if (test_and_clear_bit(i, owned) && !boot)
 				print_update("SHD", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 			continue;
@@ -107,7 +108,7 @@ static void cmci_discover(int banks, int boot)
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & CMCI_EN) {
-			if (!test_and_set_bit(i, owned) || boot)
+			if (!test_and_set_bit(i, owned) && !boot)
 				print_update("CMCI", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 		} else {
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 81c499e..e1a0a3b 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -190,7 +190,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb,
 		mutex_unlock(&therm_cpu_lock);
 		break;
 	}
-	return err ? NOTIFY_BAD : NOTIFY_OK;
+	return notifier_from_errno(err);
 }
 
 static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata =
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
new file mode 100644
index 0000000..16f41bb
--- /dev/null
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -0,0 +1,55 @@
+/*
+ * HyperV  Detection code.
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <asm/processor.h>
+#include <asm/hypervisor.h>
+#include <asm/hyperv.h>
+#include <asm/mshyperv.h>
+
+struct ms_hyperv_info ms_hyperv;
+
+static bool __init ms_hyperv_platform(void)
+{
+	u32 eax;
+	u32 hyp_signature[3];
+
+	if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))
+		return false;
+
+	cpuid(HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS,
+	      &eax, &hyp_signature[0], &hyp_signature[1], &hyp_signature[2]);
+
+	return eax >= HYPERV_CPUID_MIN &&
+		eax <= HYPERV_CPUID_MAX &&
+		!memcmp("Microsoft Hv", hyp_signature, 12);
+}
+
+static void __init ms_hyperv_init_platform(void)
+{
+	/*
+	 * Extract the features and hints
+	 */
+	ms_hyperv.features = cpuid_eax(HYPERV_CPUID_FEATURES);
+	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
+
+	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
+	       ms_hyperv.features, ms_hyperv.hints);
+}
+
+const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
+	.name			= "Microsoft HyperV",
+	.detect			= ms_hyperv_platform,
+	.init_platform		= ms_hyperv_init_platform,
+};
+EXPORT_SYMBOL(x86_hyper_ms_hyperv);
diff --git a/arch/x86/kernel/cpu/mtrr/Makefile b/arch/x86/kernel/cpu/mtrr/Makefile
index f4361b5..ad9e5ed 100644
--- a/arch/x86/kernel/cpu/mtrr/Makefile
+++ b/arch/x86/kernel/cpu/mtrr/Makefile
@@ -1,3 +1,3 @@
-obj-y		:= main.o if.o generic.o state.o cleanup.o
+obj-y		:= main.o if.o generic.o cleanup.o
 obj-$(CONFIG_X86_32) += amd.o cyrix.o centaur.o
 
diff --git a/arch/x86/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c
index 33af141..92ba9cd 100644
--- a/arch/x86/kernel/cpu/mtrr/amd.c
+++ b/arch/x86/kernel/cpu/mtrr/amd.c
@@ -108,7 +108,7 @@ amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
 	return 0;
 }
 
-static struct mtrr_ops amd_mtrr_ops = {
+static const struct mtrr_ops amd_mtrr_ops = {
 	.vendor            = X86_VENDOR_AMD,
 	.set               = amd_set_mtrr,
 	.get               = amd_get_mtrr,
diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index de89f14..316fe3e 100644
--- a/arch/x86/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
@@ -110,7 +110,7 @@ centaur_validate_add_page(unsigned long base, unsigned long size, unsigned int t
 	return 0;
 }
 
-static struct mtrr_ops centaur_mtrr_ops = {
+static const struct mtrr_ops centaur_mtrr_ops = {
 	.vendor            = X86_VENDOR_CENTAUR,
 	.set               = centaur_set_mcr,
 	.get               = centaur_get_mcr,
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 09b1698..06130b5 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -22,10 +22,10 @@
 #include <linux/pci.h>
 #include <linux/smp.h>
 #include <linux/cpu.h>
-#include <linux/sort.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/kvm_para.h>
+#include <linux/range.h>
 
 #include <asm/processor.h>
 #include <asm/e820.h>
@@ -34,11 +34,6 @@
 
 #include "mtrr.h"
 
-struct res_range {
-	unsigned long	start;
-	unsigned long	end;
-};
-
 struct var_mtrr_range_state {
 	unsigned long	base_pfn;
 	unsigned long	size_pfn;
@@ -56,7 +51,7 @@ struct var_mtrr_state {
 /* Should be related to MTRR_VAR_RANGES nums */
 #define RANGE_NUM				256
 
-static struct res_range __initdata		range[RANGE_NUM];
+static struct range __initdata		range[RANGE_NUM];
 static int __initdata				nr_range;
 
 static struct var_mtrr_range_state __initdata	range_state[RANGE_NUM];
@@ -64,152 +59,11 @@ static struct var_mtrr_range_state __initdata	range_state[RANGE_NUM];
 static int __initdata debug_print;
 #define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
 
-
-static int __init
-add_range(struct res_range *range, int nr_range,
-	  unsigned long start, unsigned long end)
-{
-	/* Out of slots: */
-	if (nr_range >= RANGE_NUM)
-		return nr_range;
-
-	range[nr_range].start = start;
-	range[nr_range].end = end;
-
-	nr_range++;
-
-	return nr_range;
-}
-
-static int __init
-add_range_with_merge(struct res_range *range, int nr_range,
-		     unsigned long start, unsigned long end)
-{
-	int i;
-
-	/* Try to merge it with old one: */
-	for (i = 0; i < nr_range; i++) {
-		unsigned long final_start, final_end;
-		unsigned long common_start, common_end;
-
-		if (!range[i].end)
-			continue;
-
-		common_start = max(range[i].start, start);
-		common_end = min(range[i].end, end);
-		if (common_start > common_end + 1)
-			continue;
-
-		final_start = min(range[i].start, start);
-		final_end = max(range[i].end, end);
-
-		range[i].start = final_start;
-		range[i].end =  final_end;
-		return nr_range;
-	}
-
-	/* Need to add it: */
-	return add_range(range, nr_range, start, end);
-}
-
-static void __init
-subtract_range(struct res_range *range, unsigned long start, unsigned long end)
-{
-	int i, j;
-
-	for (j = 0; j < RANGE_NUM; j++) {
-		if (!range[j].end)
-			continue;
-
-		if (start <= range[j].start && end >= range[j].end) {
-			range[j].start = 0;
-			range[j].end = 0;
-			continue;
-		}
-
-		if (start <= range[j].start && end < range[j].end &&
-		    range[j].start < end + 1) {
-			range[j].start = end + 1;
-			continue;
-		}
-
-
-		if (start > range[j].start && end >= range[j].end &&
-		    range[j].end > start - 1) {
-			range[j].end = start - 1;
-			continue;
-		}
-
-		if (start > range[j].start && end < range[j].end) {
-			/* Find the new spare: */
-			for (i = 0; i < RANGE_NUM; i++) {
-				if (range[i].end == 0)
-					break;
-			}
-			if (i < RANGE_NUM) {
-				range[i].end = range[j].end;
-				range[i].start = end + 1;
-			} else {
-				printk(KERN_ERR "run of slot in ranges\n");
-			}
-			range[j].end = start - 1;
-			continue;
-		}
-	}
-}
-
-static int __init cmp_range(const void *x1, const void *x2)
-{
-	const struct res_range *r1 = x1;
-	const struct res_range *r2 = x2;
-	long start1, start2;
-
-	start1 = r1->start;
-	start2 = r2->start;
-
-	return start1 - start2;
-}
-
-static int __init clean_sort_range(struct res_range *range, int az)
-{
-	int i, j, k = az - 1, nr_range = 0;
-
-	for (i = 0; i < k; i++) {
-		if (range[i].end)
-			continue;
-		for (j = k; j > i; j--) {
-			if (range[j].end) {
-				k = j;
-				break;
-			}
-		}
-		if (j == i)
-			break;
-		range[i].start = range[k].start;
-		range[i].end   = range[k].end;
-		range[k].start = 0;
-		range[k].end   = 0;
-		k--;
-	}
-	/* count it */
-	for (i = 0; i < az; i++) {
-		if (!range[i].end) {
-			nr_range = i;
-			break;
-		}
-	}
-
-	/* sort them */
-	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
-
-	return nr_range;
-}
-
 #define BIOS_BUG_MSG KERN_WARNING \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
 static int __init
-x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
+x86_get_mtrr_mem_range(struct range *range, int nr_range,
 		       unsigned long extra_remove_base,
 		       unsigned long extra_remove_size)
 {
@@ -223,14 +77,14 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 			continue;
 		base = range_state[i].base_pfn;
 		size = range_state[i].size_pfn;
-		nr_range = add_range_with_merge(range, nr_range, base,
-						base + size - 1);
+		nr_range = add_range_with_merge(range, RANGE_NUM, nr_range,
+						base, base + size);
 	}
 	if (debug_print) {
 		printk(KERN_DEBUG "After WB checking\n");
 		for (i = 0; i < nr_range; i++)
-			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
-				 range[i].start, range[i].end + 1);
+			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+				 range[i].start, range[i].end);
 	}
 
 	/* Take out UC ranges: */
@@ -252,19 +106,19 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 			size -= (1<<(20-PAGE_SHIFT)) - base;
 			base = 1<<(20-PAGE_SHIFT);
 		}
-		subtract_range(range, base, base + size - 1);
+		subtract_range(range, RANGE_NUM, base, base + size);
 	}
 	if (extra_remove_size)
-		subtract_range(range, extra_remove_base,
-				 extra_remove_base + extra_remove_size  - 1);
+		subtract_range(range, RANGE_NUM, extra_remove_base,
+				 extra_remove_base + extra_remove_size);
 
 	if  (debug_print) {
 		printk(KERN_DEBUG "After UC checking\n");
 		for (i = 0; i < RANGE_NUM; i++) {
 			if (!range[i].end)
 				continue;
-			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
-				 range[i].start, range[i].end + 1);
+			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+				 range[i].start, range[i].end);
 		}
 	}
 
@@ -273,26 +127,22 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 	if  (debug_print) {
 		printk(KERN_DEBUG "After sorting\n");
 		for (i = 0; i < nr_range; i++)
-			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
-				 range[i].start, range[i].end + 1);
+			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+				 range[i].start, range[i].end);
 	}
 
-	/* clear those is not used */
-	for (i = nr_range; i < RANGE_NUM; i++)
-		memset(&range[i], 0, sizeof(range[i]));
-
 	return nr_range;
 }
 
 #ifdef CONFIG_MTRR_SANITIZER
 
-static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
+static unsigned long __init sum_ranges(struct range *range, int nr_range)
 {
 	unsigned long sum = 0;
 	int i;
 
 	for (i = 0; i < nr_range; i++)
-		sum += range[i].end + 1 - range[i].start;
+		sum += range[i].end - range[i].start;
 
 	return sum;
 }
@@ -621,7 +471,7 @@ static int __init parse_mtrr_spare_reg(char *arg)
 early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
 
 static int __init
-x86_setup_var_mtrrs(struct res_range *range, int nr_range,
+x86_setup_var_mtrrs(struct range *range, int nr_range,
 		    u64 chunk_size, u64 gran_size)
 {
 	struct var_mtrr_state var_state;
@@ -639,7 +489,7 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 	/* Write the range: */
 	for (i = 0; i < nr_range; i++) {
 		set_var_mtrr_range(&var_state, range[i].start,
-				   range[i].end - range[i].start + 1);
+				   range[i].end - range[i].start);
 	}
 
 	/* Write the last range: */
@@ -742,7 +592,7 @@ mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
 		      unsigned long x_remove_base,
 		      unsigned long x_remove_size, int i)
 {
-	static struct res_range range_new[RANGE_NUM];
+	static struct range range_new[RANGE_NUM];
 	unsigned long range_sums_new;
 	static int nr_range_new;
 	int num_reg;
@@ -869,10 +719,10 @@ int __init mtrr_cleanup(unsigned address_bits)
 	 * [0, 1M) should always be covered by var mtrr with WB
 	 * and fixed mtrrs should take effect before var mtrr for it:
 	 */
-	nr_range = add_range_with_merge(range, nr_range, 0,
-					(1ULL<<(20 - PAGE_SHIFT)) - 1);
+	nr_range = add_range_with_merge(range, RANGE_NUM, nr_range, 0,
+					1ULL<<(20 - PAGE_SHIFT));
 	/* Sort the ranges: */
-	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+	sort_range(range, nr_range);
 
 	range_sums = sum_ranges(range, nr_range);
 	printk(KERN_INFO "total RAM covered: %ldM\n",
@@ -1089,9 +939,9 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	nr_range = 0;
 	if (mtrr_tom2) {
 		range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT));
-		range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1;
-		if (highest_pfn < range[nr_range].end + 1)
-			highest_pfn = range[nr_range].end + 1;
+		range[nr_range].end = mtrr_tom2 >> PAGE_SHIFT;
+		if (highest_pfn < range[nr_range].end)
+			highest_pfn = range[nr_range].end;
 		nr_range++;
 	}
 	nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
@@ -1103,15 +953,15 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* Check the holes: */
 	for (i = 0; i < nr_range - 1; i++) {
-		if (range[i].end + 1 < range[i+1].start)
-			total_trim_size += real_trim_memory(range[i].end + 1,
+		if (range[i].end < range[i+1].start)
+			total_trim_size += real_trim_memory(range[i].end,
 							    range[i+1].start);
 	}
 
 	/* Check the top: */
 	i = nr_range - 1;
-	if (range[i].end + 1 < end_pfn)
-		total_trim_size += real_trim_memory(range[i].end + 1,
+	if (range[i].end < end_pfn)
+		total_trim_size += real_trim_memory(range[i].end,
 							 end_pfn);
 
 	if (total_trim_size) {
diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index 228d982..68a3343 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -265,7 +265,7 @@ static void cyrix_set_all(void)
 	post_set();
 }
 
-static struct mtrr_ops cyrix_mtrr_ops = {
+static const struct mtrr_ops cyrix_mtrr_ops = {
 	.vendor            = X86_VENDOR_CYRIX,
 	.set_all	   = cyrix_set_all,
 	.set               = cyrix_set_arr,
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 55da0c5..fd31a44 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -6,7 +6,6 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/mm.h>
 
@@ -464,7 +463,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 		tmp |= ~((1<<(hi - 1)) - 1);
 
 		if (tmp != mask_lo) {
-			WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+			printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
 			mask_lo = tmp;
 		}
 	}
@@ -570,7 +569,7 @@ static unsigned long set_mtrr_state(void)
 
 
 static unsigned long cr4;
-static DEFINE_SPINLOCK(set_atomicity_lock);
+static DEFINE_RAW_SPINLOCK(set_atomicity_lock);
 
 /*
  * Since we are disabling the cache don't allow any interrupts,
@@ -590,7 +589,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 	 * changes to the way the kernel boots
 	 */
 
-	spin_lock(&set_atomicity_lock);
+	raw_spin_lock(&set_atomicity_lock);
 
 	/* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
 	cr0 = read_cr0() | X86_CR0_CD;
@@ -627,7 +626,7 @@ static void post_set(void) __releases(set_atomicity_lock)
 	/* Restore value of CR4 */
 	if (cpu_has_pge)
 		write_cr4(cr4);
-	spin_unlock(&set_atomicity_lock);
+	raw_spin_unlock(&set_atomicity_lock);
 }
 
 static void generic_set_all(void)
@@ -752,7 +751,7 @@ int positive_have_wrcomb(void)
 /*
  * Generic structure...
  */
-struct mtrr_ops generic_mtrr_ops = {
+const struct mtrr_ops generic_mtrr_ops = {
 	.use_intel_if		= 1,
 	.set_all		= generic_set_all,
 	.get			= generic_get_mtrr,
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index e006e56..7928963 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -5,6 +5,7 @@
 #include <linux/module.h>
 #include <linux/ctype.h>
 #include <linux/string.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 
 #define LINE_SIZE 80
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 84e83de..79556bd 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -60,14 +60,14 @@ static DEFINE_MUTEX(mtrr_mutex);
 u64 size_or_mask, size_and_mask;
 static bool mtrr_aps_delayed_init;
 
-static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
+static const struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
-struct mtrr_ops *mtrr_if;
+const struct mtrr_ops *mtrr_if;
 
 static void set_mtrr(unsigned int reg, unsigned long base,
 		     unsigned long size, mtrr_type type);
 
-void set_mtrr_ops(struct mtrr_ops *ops)
+void set_mtrr_ops(const struct mtrr_ops *ops)
 {
 	if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
 		mtrr_ops[ops->vendor] = ops;
@@ -145,6 +145,7 @@ struct set_mtrr_data {
 
 /**
  * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ * @info: pointer to mtrr configuration data
  *
  * Returns nothing.
  */
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index a501dee..df5e41f 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -32,7 +32,7 @@ extern int generic_get_free_region(unsigned long base, unsigned long size,
 extern int generic_validate_add_page(unsigned long base, unsigned long size,
 				     unsigned int type);
 
-extern struct mtrr_ops generic_mtrr_ops;
+extern const struct mtrr_ops generic_mtrr_ops;
 
 extern int positive_have_wrcomb(void);
 
@@ -53,10 +53,10 @@ void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 void get_mtrr_state(void);
 
-extern void set_mtrr_ops(struct mtrr_ops *ops);
+extern void set_mtrr_ops(const struct mtrr_ops *ops);
 
 extern u64 size_or_mask, size_and_mask;
-extern struct mtrr_ops *mtrr_if;
+extern const struct mtrr_ops *mtrr_if;
 
 #define is_cpu(vnd)	(mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
 #define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
deleted file mode 100644
index dfc80b4..0000000
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-
-#include <asm/processor-cyrix.h>
-#include <asm/processor-flags.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-
-#include "mtrr.h"
-
-/* Put the processor into a state where MTRRs can be safely set */
-void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
-{
-	unsigned int cr0;
-
-	/* Disable interrupts locally */
-	local_irq_save(ctxt->flags);
-
-	if (use_intel() || is_cpu(CYRIX)) {
-
-		/* Save value of CR4 and clear Page Global Enable (bit 7) */
-		if (cpu_has_pge) {
-			ctxt->cr4val = read_cr4();
-			write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
-		}
-
-		/*
-		 * Disable and flush caches. Note that wbinvd flushes the TLBs
-		 * as a side-effect
-		 */
-		cr0 = read_cr0() | X86_CR0_CD;
-		wbinvd();
-		write_cr0(cr0);
-		wbinvd();
-
-		if (use_intel()) {
-			/* Save MTRR state */
-			rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
-		} else {
-			/*
-			 * Cyrix ARRs -
-			 * everything else were excluded at the top
-			 */
-			ctxt->ccr3 = getCx86(CX86_CCR3);
-		}
-	}
-}
-
-void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
-{
-	if (use_intel()) {
-		/* Disable MTRRs, and set the default type to uncached */
-		mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
-		      ctxt->deftype_hi);
-	} else {
-		if (is_cpu(CYRIX)) {
-			/* Cyrix ARRs - everything else were excluded at the top */
-			setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
-		}
-	}
-}
-
-/* Restore the processor after a set_mtrr_prepare */
-void set_mtrr_done(struct set_mtrr_context *ctxt)
-{
-	if (use_intel() || is_cpu(CYRIX)) {
-
-		/* Flush caches and TLBs */
-		wbinvd();
-
-		/* Restore MTRRdefType */
-		if (use_intel()) {
-			/* Intel (P6) standard MTRRs */
-			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo,
-				   ctxt->deftype_hi);
-		} else {
-			/*
-			 * Cyrix ARRs -
-			 * everything else was excluded at the top
-			 */
-			setCx86(CX86_CCR3, ctxt->ccr3);
-		}
-
-		/* Enable caches */
-		write_cr0(read_cr0() & 0xbfffffff);
-
-		/* Restore value of CR4 */
-		if (cpu_has_pge)
-			write_cr4(ctxt->cr4val);
-	}
-	/* Re-enable interrupts locally (if enabled previously) */
-	local_irq_restore(ctxt->flags);
-}
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 8c1c070..5db5b7d 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -7,6 +7,7 @@
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
  *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *  Copyright (C) 2009 Google, Inc., Stephane Eranian
  *
  *  For licencing details see kernel-base/COPYING
  */
@@ -20,215 +21,239 @@
 #include <linux/kdebug.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
+#include <linux/bitops.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
 #include <asm/nmi.h>
+#include <asm/compat.h>
+
+#if 0
+#undef wrmsrl
+#define wrmsrl(msr, val) 					\
+do {								\
+	trace_printk("wrmsrl(%lx, %lx)\n", (unsigned long)(msr),\
+			(unsigned long)(val));			\
+	native_write_msr((msr), (u32)((u64)(val)), 		\
+			(u32)((u64)(val) >> 32));		\
+} while (0)
+#endif
 
-static u64 perf_event_mask __read_mostly;
+/*
+ * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
+ */
+static unsigned long
+copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long offset, addr = (unsigned long)from;
+	int type = in_nmi() ? KM_NMI : KM_IRQ0;
+	unsigned long size, len = 0;
+	struct page *page;
+	void *map;
+	int ret;
 
-/* The maximal number of PEBS events: */
-#define MAX_PEBS_EVENTS	4
+	do {
+		ret = __get_user_pages_fast(addr, 1, 0, &page);
+		if (!ret)
+			break;
 
-/* The size of a BTS record in bytes: */
-#define BTS_RECORD_SIZE		24
+		offset = addr & (PAGE_SIZE - 1);
+		size = min(PAGE_SIZE - offset, n - len);
 
-/* The size of a per-cpu BTS buffer in bytes: */
-#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 2048)
+		map = kmap_atomic(page, type);
+		memcpy(to, map+offset, size);
+		kunmap_atomic(map, type);
+		put_page(page);
 
-/* The BTS overflow threshold in bytes from the end of the buffer: */
-#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 128)
+		len  += size;
+		to   += size;
+		addr += size;
 
+	} while (len < n);
 
-/*
- * Bits in the debugctlmsr controlling branch tracing.
- */
-#define X86_DEBUGCTL_TR			(1 << 6)
-#define X86_DEBUGCTL_BTS		(1 << 7)
-#define X86_DEBUGCTL_BTINT		(1 << 8)
-#define X86_DEBUGCTL_BTS_OFF_OS		(1 << 9)
-#define X86_DEBUGCTL_BTS_OFF_USR	(1 << 10)
+	return len;
+}
 
-/*
- * A debug store configuration.
- *
- * We only support architectures that use 64bit fields.
- */
-struct debug_store {
-	u64	bts_buffer_base;
-	u64	bts_index;
-	u64	bts_absolute_maximum;
-	u64	bts_interrupt_threshold;
-	u64	pebs_buffer_base;
-	u64	pebs_index;
-	u64	pebs_absolute_maximum;
-	u64	pebs_interrupt_threshold;
-	u64	pebs_event_reset[MAX_PEBS_EVENTS];
+struct event_constraint {
+	union {
+		unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+		u64		idxmsk64;
+	};
+	u64	code;
+	u64	cmask;
+	int	weight;
+};
+
+struct amd_nb {
+	int nb_id;  /* NorthBridge id */
+	int refcnt; /* reference count */
+	struct perf_event *owners[X86_PMC_IDX_MAX];
+	struct event_constraint event_constraints[X86_PMC_IDX_MAX];
 };
 
+#define MAX_LBR_ENTRIES		16
+
 struct cpu_hw_events {
-	struct perf_event	*events[X86_PMC_IDX_MAX];
-	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	/*
+	 * Generic x86 PMC bits
+	 */
+	struct perf_event	*events[X86_PMC_IDX_MAX]; /* in counter order */
 	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-	unsigned long		interrupts;
 	int			enabled;
+
+	int			n_events;
+	int			n_added;
+	int			n_txn;
+	int			assign[X86_PMC_IDX_MAX]; /* event to counter assignment */
+	u64			tags[X86_PMC_IDX_MAX];
+	struct perf_event	*event_list[X86_PMC_IDX_MAX]; /* in enabled order */
+
+	unsigned int		group_flag;
+
+	/*
+	 * Intel DebugStore bits
+	 */
 	struct debug_store	*ds;
-};
+	u64			pebs_enabled;
 
-struct event_constraint {
-	unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-	int		code;
+	/*
+	 * Intel LBR bits
+	 */
+	int				lbr_users;
+	void				*lbr_context;
+	struct perf_branch_stack	lbr_stack;
+	struct perf_branch_entry	lbr_entries[MAX_LBR_ENTRIES];
+
+	/*
+	 * AMD specific bits
+	 */
+	struct amd_nb		*amd_nb;
 };
 
-#define EVENT_CONSTRAINT(c, m) { .code = (c), .idxmsk[0] = (m) }
-#define EVENT_CONSTRAINT_END  { .code = 0, .idxmsk[0] = 0 }
+#define __EVENT_CONSTRAINT(c, n, m, w) {\
+	{ .idxmsk64 = (n) },		\
+	.code = (c),			\
+	.cmask = (m),			\
+	.weight = (w),			\
+}
+
+#define EVENT_CONSTRAINT(c, n, m)	\
+	__EVENT_CONSTRAINT(c, n, m, HWEIGHT(n))
 
-#define for_each_event_constraint(e, c) \
-	for ((e) = (c); (e)->idxmsk[0]; (e)++)
+/*
+ * Constraint on the Event code.
+ */
+#define INTEL_EVENT_CONSTRAINT(c, n)	\
+	EVENT_CONSTRAINT(c, n, ARCH_PERFMON_EVENTSEL_EVENT)
 
+/*
+ * Constraint on the Event code + UMask + fixed-mask
+ *
+ * filter mask to validate fixed counter events.
+ * the following filters disqualify for fixed counters:
+ *  - inv
+ *  - edge
+ *  - cnt-mask
+ *  The other filters are supported by fixed counters.
+ *  The any-thread option is supported starting with v3.
+ */
+#define FIXED_EVENT_CONSTRAINT(c, n)	\
+	EVENT_CONSTRAINT(c, (1ULL << (32+n)), X86_RAW_EVENT_MASK)
+
+/*
+ * Constraint on the Event code + UMask
+ */
+#define PEBS_EVENT_CONSTRAINT(c, n)	\
+	EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK)
+
+#define EVENT_CONSTRAINT_END		\
+	EVENT_CONSTRAINT(0, 0, 0)
+
+#define for_each_event_constraint(e, c)	\
+	for ((e) = (c); (e)->weight; (e)++)
+
+union perf_capabilities {
+	struct {
+		u64	lbr_format    : 6;
+		u64	pebs_trap     : 1;
+		u64	pebs_arch_reg : 1;
+		u64	pebs_format   : 4;
+		u64	smm_freeze    : 1;
+	};
+	u64	capabilities;
+};
 
 /*
  * struct x86_pmu - generic x86 pmu
  */
 struct x86_pmu {
+	/*
+	 * Generic x86 PMC bits
+	 */
 	const char	*name;
 	int		version;
 	int		(*handle_irq)(struct pt_regs *);
 	void		(*disable_all)(void);
-	void		(*enable_all)(void);
-	void		(*enable)(struct hw_perf_event *, int);
-	void		(*disable)(struct hw_perf_event *, int);
+	void		(*enable_all)(int added);
+	void		(*enable)(struct perf_event *);
+	void		(*disable)(struct perf_event *);
+	int		(*hw_config)(struct perf_event *event);
+	int		(*schedule_events)(struct cpu_hw_events *cpuc, int n, int *assign);
 	unsigned	eventsel;
 	unsigned	perfctr;
 	u64		(*event_map)(int);
-	u64		(*raw_event)(u64);
 	int		max_events;
-	int		num_events;
-	int		num_events_fixed;
-	int		event_bits;
-	u64		event_mask;
+	int		num_counters;
+	int		num_counters_fixed;
+	int		cntval_bits;
+	u64		cntval_mask;
 	int		apic;
 	u64		max_period;
-	u64		intel_ctrl;
-	void		(*enable_bts)(u64 config);
-	void		(*disable_bts)(void);
-	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
-					 struct hw_perf_event *hwc);
-};
-
-static struct x86_pmu x86_pmu __read_mostly;
-
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
-	.enabled = 1,
-};
-
-static const struct event_constraint *event_constraints;
-
-/*
- * Not sure about some of these
- */
-static const u64 p6_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
-};
+	struct event_constraint *
+			(*get_event_constraints)(struct cpu_hw_events *cpuc,
+						 struct perf_event *event);
 
-static u64 p6_pmu_event_map(int hw_event)
-{
-	return p6_perfmon_event_map[hw_event];
-}
+	void		(*put_event_constraints)(struct cpu_hw_events *cpuc,
+						 struct perf_event *event);
+	struct event_constraint *event_constraints;
+	void		(*quirks)(void);
 
-/*
- * Event setting that is specified not to count anything.
- * We use this to effectively disable a counter.
- *
- * L2_RQSTS with 0 MESI unit mask.
- */
-#define P6_NOP_EVENT			0x0000002EULL
+	int		(*cpu_prepare)(int cpu);
+	void		(*cpu_starting)(int cpu);
+	void		(*cpu_dying)(int cpu);
+	void		(*cpu_dead)(int cpu);
 
-static u64 p6_pmu_raw_event(u64 hw_event)
-{
-#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
-#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
-#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
-#define P6_EVNTSEL_INV_MASK		0x00800000ULL
-#define P6_EVNTSEL_REG_MASK		0xFF000000ULL
-
-#define P6_EVNTSEL_MASK			\
-	(P6_EVNTSEL_EVENT_MASK |	\
-	 P6_EVNTSEL_UNIT_MASK  |	\
-	 P6_EVNTSEL_EDGE_MASK  |	\
-	 P6_EVNTSEL_INV_MASK   |	\
-	 P6_EVNTSEL_REG_MASK)
-
-	return hw_event & P6_EVNTSEL_MASK;
-}
+	/*
+	 * Intel Arch Perfmon v2+
+	 */
+	u64			intel_ctrl;
+	union perf_capabilities intel_cap;
 
-static const struct event_constraint intel_p6_event_constraints[] =
-{
-	EVENT_CONSTRAINT(0xc1, 0x1),	/* FLOPS */
-	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
-	EVENT_CONSTRAINT(0x11, 0x1),	/* FP_ASSIST */
-	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
-	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
-	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
-	EVENT_CONSTRAINT_END
-};
+	/*
+	 * Intel DebugStore bits
+	 */
+	int		bts, pebs;
+	int		pebs_record_size;
+	void		(*drain_pebs)(struct pt_regs *regs);
+	struct event_constraint *pebs_constraints;
 
-/*
- * Intel PerfMon v3. Used on Core2 and later.
- */
-static const u64 intel_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4f2e,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x412e,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-  [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
+	/*
+	 * Intel LBR
+	 */
+	unsigned long	lbr_tos, lbr_from, lbr_to; /* MSR base regs       */
+	int		lbr_nr;			   /* hardware stack size */
 };
 
-static const struct event_constraint intel_core_event_constraints[] =
-{
-	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
-	EVENT_CONSTRAINT(0x11, 0x2),	/* FP_ASSIST */
-	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
-	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
-	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
-	EVENT_CONSTRAINT(0x18, 0x1),	/* IDLE_DURING_DIV */
-	EVENT_CONSTRAINT(0x19, 0x2),	/* DELAYED_BYPASS */
-	EVENT_CONSTRAINT(0xa1, 0x1),	/* RS_UOPS_DISPATCH_CYCLES */
-	EVENT_CONSTRAINT(0xcb, 0x1),	/* MEM_LOAD_RETIRED */
-	EVENT_CONSTRAINT_END
-};
+static struct x86_pmu x86_pmu __read_mostly;
 
-static const struct event_constraint intel_nehalem_event_constraints[] =
-{
-	EVENT_CONSTRAINT(0x40, 0x3),	/* L1D_CACHE_LD */
-	EVENT_CONSTRAINT(0x41, 0x3),	/* L1D_CACHE_ST */
-	EVENT_CONSTRAINT(0x42, 0x3),	/* L1D_CACHE_LOCK */
-	EVENT_CONSTRAINT(0x43, 0x3),	/* L1D_ALL_REF */
-	EVENT_CONSTRAINT(0x4e, 0x3),	/* L1D_PREFETCH */
-	EVENT_CONSTRAINT(0x4c, 0x3),	/* LOAD_HIT_PRE */
-	EVENT_CONSTRAINT(0x51, 0x3),	/* L1D */
-	EVENT_CONSTRAINT(0x52, 0x3),	/* L1D_CACHE_PREFETCH_LOCK_FB_HIT */
-	EVENT_CONSTRAINT(0x53, 0x3),	/* L1D_CACHE_LOCK_FB_HIT */
-	EVENT_CONSTRAINT(0xc5, 0x3),	/* CACHE_LOCK_CYCLES */
-	EVENT_CONSTRAINT_END
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+	.enabled = 1,
 };
 
-static u64 intel_pmu_event_map(int hw_event)
-{
-	return intel_perfmon_event_map[hw_event];
-}
+static int x86_perf_event_set_period(struct perf_event *event);
 
 /*
  * Generalized hw caching related hw_event table, filled
@@ -245,435 +270,18 @@ static u64 __read_mostly hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX];
 
-static __initconst u64 nehalem_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
-		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
-		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0x0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
-		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
-		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
-		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI   (alias)  */
-		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI   (alias)  */
-		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0x0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
-		[ C(RESULT_MISS)   ] = 0x20c8, /* ITLB_MISS_RETIRED            */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
-		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static __initconst u64 core2_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI          */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE       */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI          */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE       */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x104e, /* L1D_PREFETCH.REQUESTS      */
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* L1I.READS                  */
-		[ C(RESULT_MISS)   ] = 0x0081, /* L1I.MISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0208, /* DTLB_MISSES.MISS_LD        */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0808, /* DTLB_MISSES.MISS_ST        */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
-		[ C(RESULT_MISS)   ] = 0x1282, /* ITLBMISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
-		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static __initconst u64 atom_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE.LD               */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE.ST               */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                  */
-		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE_LD.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0508, /* DTLB_MISSES.MISS_LD        */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE_ST.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0608, /* DTLB_MISSES.MISS_ST        */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
-		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES                */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
-		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static u64 intel_pmu_raw_event(u64 hw_event)
-{
-#define CORE_EVNTSEL_EVENT_MASK		0x000000FFULL
-#define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
-#define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
-#define CORE_EVNTSEL_INV_MASK		0x00800000ULL
-#define CORE_EVNTSEL_REG_MASK		0xFF000000ULL
-
-#define CORE_EVNTSEL_MASK		\
-	(CORE_EVNTSEL_EVENT_MASK |	\
-	 CORE_EVNTSEL_UNIT_MASK  |	\
-	 CORE_EVNTSEL_EDGE_MASK  |	\
-	 CORE_EVNTSEL_INV_MASK  |	\
-	 CORE_EVNTSEL_REG_MASK)
-
-	return hw_event & CORE_EVNTSEL_MASK;
-}
-
-static __initconst u64 amd_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts  */
-		[ C(RESULT_MISS)   ] = 0x0167, /* Data Prefetcher :cancelled */
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction cache fetches  */
-		[ C(RESULT_MISS)   ] = 0x0081, /* Instruction cache misses   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */
-		[ C(RESULT_MISS)   ] = 0x037E, /* L2 Cache Misses : IC+DC     */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback           */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0046, /* L1 DTLB and L2 DLTB Miss   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction fecthes        */
-		[ C(RESULT_MISS)   ] = 0x0085, /* Instr. fetch ITLB misses   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c2, /* Retired Branch Instr.      */
-		[ C(RESULT_MISS)   ] = 0x00c3, /* Retired Mispredicted BI    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-/*
- * AMD Performance Monitor K7 and later.
- */
-static const u64 amd_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-};
-
-static u64 amd_pmu_event_map(int hw_event)
-{
-	return amd_perfmon_event_map[hw_event];
-}
-
-static u64 amd_pmu_raw_event(u64 hw_event)
-{
-#define K7_EVNTSEL_EVENT_MASK	0x7000000FFULL
-#define K7_EVNTSEL_UNIT_MASK	0x00000FF00ULL
-#define K7_EVNTSEL_EDGE_MASK	0x000040000ULL
-#define K7_EVNTSEL_INV_MASK	0x000800000ULL
-#define K7_EVNTSEL_REG_MASK	0x0FF000000ULL
-
-#define K7_EVNTSEL_MASK			\
-	(K7_EVNTSEL_EVENT_MASK |	\
-	 K7_EVNTSEL_UNIT_MASK  |	\
-	 K7_EVNTSEL_EDGE_MASK  |	\
-	 K7_EVNTSEL_INV_MASK   |	\
-	 K7_EVNTSEL_REG_MASK)
-
-	return hw_event & K7_EVNTSEL_MASK;
-}
-
 /*
  * Propagate event elapsed time into the generic event.
  * Can only be executed on the CPU where the event is active.
  * Returns the delta events processed.
  */
 static u64
-x86_perf_event_update(struct perf_event *event,
-			struct hw_perf_event *hwc, int idx)
+x86_perf_event_update(struct perf_event *event)
 {
-	int shift = 64 - x86_pmu.event_bits;
+	struct hw_perf_event *hwc = &event->hw;
+	int shift = 64 - x86_pmu.cntval_bits;
 	u64 prev_raw_count, new_raw_count;
+	int idx = hwc->idx;
 	s64 delta;
 
 	if (idx == X86_PMC_IDX_FIXED_BTS)
@@ -714,33 +322,32 @@ again:
 static atomic_t active_events;
 static DEFINE_MUTEX(pmc_reserve_mutex);
 
+#ifdef CONFIG_X86_LOCAL_APIC
+
 static bool reserve_pmc_hardware(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		disable_lapic_nmi_watchdog();
 
-	for (i = 0; i < x86_pmu.num_events; i++) {
+	for (i = 0; i < x86_pmu.num_counters; i++) {
 		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
 			goto perfctr_fail;
 	}
 
-	for (i = 0; i < x86_pmu.num_events; i++) {
+	for (i = 0; i < x86_pmu.num_counters; i++) {
 		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
 			goto eventsel_fail;
 	}
-#endif
 
 	return true;
 
-#ifdef CONFIG_X86_LOCAL_APIC
 eventsel_fail:
 	for (i--; i >= 0; i--)
 		release_evntsel_nmi(x86_pmu.eventsel + i);
 
-	i = x86_pmu.num_events;
+	i = x86_pmu.num_counters;
 
 perfctr_fail:
 	for (i--; i >= 0; i--)
@@ -750,128 +357,36 @@ perfctr_fail:
 		enable_lapic_nmi_watchdog();
 
 	return false;
-#endif
 }
 
 static void release_pmc_hardware(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
-	for (i = 0; i < x86_pmu.num_events; i++) {
+	for (i = 0; i < x86_pmu.num_counters; i++) {
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 		release_evntsel_nmi(x86_pmu.eventsel + i);
 	}
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		enable_lapic_nmi_watchdog();
-#endif
 }
 
-static inline bool bts_available(void)
-{
-	return x86_pmu.enable_bts != NULL;
-}
+#else
 
-static inline void init_debug_store_on_cpu(int cpu)
-{
-	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
-
-	if (!ds)
-		return;
+static bool reserve_pmc_hardware(void) { return true; }
+static void release_pmc_hardware(void) {}
 
-	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
-		     (u32)((u64)(unsigned long)ds),
-		     (u32)((u64)(unsigned long)ds >> 32));
-}
-
-static inline void fini_debug_store_on_cpu(int cpu)
-{
-	if (!per_cpu(cpu_hw_events, cpu).ds)
-		return;
-
-	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
-}
-
-static void release_bts_hardware(void)
-{
-	int cpu;
-
-	if (!bts_available())
-		return;
-
-	get_online_cpus();
-
-	for_each_online_cpu(cpu)
-		fini_debug_store_on_cpu(cpu);
-
-	for_each_possible_cpu(cpu) {
-		struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
-
-		if (!ds)
-			continue;
-
-		per_cpu(cpu_hw_events, cpu).ds = NULL;
-
-		kfree((void *)(unsigned long)ds->bts_buffer_base);
-		kfree(ds);
-	}
-
-	put_online_cpus();
-}
-
-static int reserve_bts_hardware(void)
-{
-	int cpu, err = 0;
-
-	if (!bts_available())
-		return 0;
-
-	get_online_cpus();
-
-	for_each_possible_cpu(cpu) {
-		struct debug_store *ds;
-		void *buffer;
-
-		err = -ENOMEM;
-		buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
-		if (unlikely(!buffer))
-			break;
-
-		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
-		if (unlikely(!ds)) {
-			kfree(buffer);
-			break;
-		}
-
-		ds->bts_buffer_base = (u64)(unsigned long)buffer;
-		ds->bts_index = ds->bts_buffer_base;
-		ds->bts_absolute_maximum =
-			ds->bts_buffer_base + BTS_BUFFER_SIZE;
-		ds->bts_interrupt_threshold =
-			ds->bts_absolute_maximum - BTS_OVFL_TH;
-
-		per_cpu(cpu_hw_events, cpu).ds = ds;
-		err = 0;
-	}
-
-	if (err)
-		release_bts_hardware();
-	else {
-		for_each_online_cpu(cpu)
-			init_debug_store_on_cpu(cpu);
-	}
-
-	put_online_cpus();
+#endif
 
-	return err;
-}
+static int reserve_ds_buffers(void);
+static void release_ds_buffers(void);
 
 static void hw_perf_event_destroy(struct perf_event *event)
 {
 	if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
 		release_pmc_hardware();
-		release_bts_hardware();
+		release_ds_buffers();
 		mutex_unlock(&pmc_reserve_mutex);
 	}
 }
@@ -914,88 +429,11 @@ set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event_attr *attr)
 	return 0;
 }
 
-static void intel_pmu_enable_bts(u64 config)
-{
-	unsigned long debugctlmsr;
-
-	debugctlmsr = get_debugctlmsr();
-
-	debugctlmsr |= X86_DEBUGCTL_TR;
-	debugctlmsr |= X86_DEBUGCTL_BTS;
-	debugctlmsr |= X86_DEBUGCTL_BTINT;
-
-	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
-		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
-
-	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
-		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
-
-	update_debugctlmsr(debugctlmsr);
-}
-
-static void intel_pmu_disable_bts(void)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	unsigned long debugctlmsr;
-
-	if (!cpuc->ds)
-		return;
-
-	debugctlmsr = get_debugctlmsr();
-
-	debugctlmsr &=
-		~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
-		  X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
-
-	update_debugctlmsr(debugctlmsr);
-}
-
-/*
- * Setup the hardware configuration for a given attr_type
- */
-static int __hw_perf_event_init(struct perf_event *event)
+static int x86_setup_perfctr(struct perf_event *event)
 {
 	struct perf_event_attr *attr = &event->attr;
 	struct hw_perf_event *hwc = &event->hw;
 	u64 config;
-	int err;
-
-	if (!x86_pmu_initialized())
-		return -ENODEV;
-
-	err = 0;
-	if (!atomic_inc_not_zero(&active_events)) {
-		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&active_events) == 0) {
-			if (!reserve_pmc_hardware())
-				err = -EBUSY;
-			else
-				err = reserve_bts_hardware();
-		}
-		if (!err)
-			atomic_inc(&active_events);
-		mutex_unlock(&pmc_reserve_mutex);
-	}
-	if (err)
-		return err;
-
-	event->destroy = hw_perf_event_destroy;
-
-	/*
-	 * Generate PMC IRQs:
-	 * (keep 'enabled' bit clear for now)
-	 */
-	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
-
-	hwc->idx = -1;
-
-	/*
-	 * Count user and OS events unless requested not to.
-	 */
-	if (!attr->exclude_user)
-		hwc->config |= ARCH_PERFMON_EVENTSEL_USR;
-	if (!attr->exclude_kernel)
-		hwc->config |= ARCH_PERFMON_EVENTSEL_OS;
 
 	if (!hwc->sample_period) {
 		hwc->sample_period = x86_pmu.max_period;
@@ -1012,13 +450,8 @@ static int __hw_perf_event_init(struct perf_event *event)
 			return -EOPNOTSUPP;
 	}
 
-	/*
-	 * Raw hw_event type provide the config in the hw_event structure
-	 */
-	if (attr->type == PERF_TYPE_RAW) {
-		hwc->config |= x86_pmu.raw_event(attr->config);
+	if (attr->type == PERF_TYPE_RAW)
 		return 0;
-	}
 
 	if (attr->type == PERF_TYPE_HW_CACHE)
 		return set_ext_hw_attr(hwc, attr);
@@ -1043,11 +476,11 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
 	    (hwc->sample_period == 1)) {
 		/* BTS is not supported by this architecture. */
-		if (!bts_available())
+		if (!x86_pmu.bts)
 			return -EOPNOTSUPP;
 
 		/* BTS is currently only allowed for user-mode. */
-		if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+		if (!attr->exclude_kernel)
 			return -EOPNOTSUPP;
 	}
 
@@ -1056,127 +489,122 @@ static int __hw_perf_event_init(struct perf_event *event)
 	return 0;
 }
 
-static void p6_pmu_disable_all(void)
+static int x86_pmu_hw_config(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val;
+	if (event->attr.precise_ip) {
+		int precise = 0;
 
-	if (!cpuc->enabled)
-		return;
+		/* Support for constant skid */
+		if (x86_pmu.pebs)
+			precise++;
 
-	cpuc->enabled = 0;
-	barrier();
+		/* Support for IP fixup */
+		if (x86_pmu.lbr_nr)
+			precise++;
+
+		if (event->attr.precise_ip > precise)
+			return -EOPNOTSUPP;
+	}
 
-	/* p6 only has one enable register */
-	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsrl(MSR_P6_EVNTSEL0, val);
+	/*
+	 * Generate PMC IRQs:
+	 * (keep 'enabled' bit clear for now)
+	 */
+	event->hw.config = ARCH_PERFMON_EVENTSEL_INT;
+
+	/*
+	 * Count user and OS events unless requested not to
+	 */
+	if (!event->attr.exclude_user)
+		event->hw.config |= ARCH_PERFMON_EVENTSEL_USR;
+	if (!event->attr.exclude_kernel)
+		event->hw.config |= ARCH_PERFMON_EVENTSEL_OS;
+
+	if (event->attr.type == PERF_TYPE_RAW)
+		event->hw.config |= event->attr.config & X86_RAW_EVENT_MASK;
+
+	return x86_setup_perfctr(event);
 }
 
-static void intel_pmu_disable_all(void)
+/*
+ * Setup the hardware configuration for a given attr_type
+ */
+static int __hw_perf_event_init(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int err;
 
-	if (!cpuc->enabled)
-		return;
+	if (!x86_pmu_initialized())
+		return -ENODEV;
 
-	cpuc->enabled = 0;
-	barrier();
+	err = 0;
+	if (!atomic_inc_not_zero(&active_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&active_events) == 0) {
+			if (!reserve_pmc_hardware())
+				err = -EBUSY;
+			else {
+				err = reserve_ds_buffers();
+				if (err)
+					release_pmc_hardware();
+			}
+		}
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+	if (err)
+		return err;
 
-	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+	event->destroy = hw_perf_event_destroy;
 
-	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
-		intel_pmu_disable_bts();
+	event->hw.idx = -1;
+	event->hw.last_cpu = -1;
+	event->hw.last_tag = ~0ULL;
+
+	return x86_pmu.hw_config(event);
 }
 
-static void amd_pmu_disable_all(void)
+static void x86_pmu_disable_all(void)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	int idx;
 
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-	/*
-	 * ensure we write the disable before we start disabling the
-	 * events proper, so that amd_pmu_enable_event() does the
-	 * right thing.
-	 */
-	barrier();
-
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		u64 val;
 
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
-		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
-		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+		rdmsrl(x86_pmu.eventsel + idx, val);
+		if (!(val & ARCH_PERFMON_EVENTSEL_ENABLE))
 			continue;
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
-		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
+		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
 
 void hw_perf_disable(void)
 {
-	if (!x86_pmu_initialized())
-		return;
-	return x86_pmu.disable_all();
-}
-
-static void p6_pmu_enable_all(void)
-{
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	unsigned long val;
 
-	if (cpuc->enabled)
+	if (!x86_pmu_initialized())
 		return;
 
-	cpuc->enabled = 1;
-	barrier();
-
-	/* p6 only has one enable register */
-	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsrl(MSR_P6_EVNTSEL0, val);
-}
-
-static void intel_pmu_enable_all(void)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	if (cpuc->enabled)
+	if (!cpuc->enabled)
 		return;
 
-	cpuc->enabled = 1;
+	cpuc->n_added = 0;
+	cpuc->enabled = 0;
 	barrier();
 
-	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
-	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
-		struct perf_event *event =
-			cpuc->events[X86_PMC_IDX_FIXED_BTS];
-
-		if (WARN_ON_ONCE(!event))
-			return;
-
-		intel_pmu_enable_bts(event->hw.config);
-	}
+	x86_pmu.disable_all();
 }
 
-static void amd_pmu_enable_all(void)
+static void x86_pmu_enable_all(int added)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	int idx;
 
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		struct perf_event *event = cpuc->events[idx];
 		u64 val;
 
@@ -1184,88 +612,267 @@ static void amd_pmu_enable_all(void)
 			continue;
 
 		val = event->hw.config;
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+		wrmsrl(x86_pmu.eventsel + idx, val);
 	}
 }
 
-void hw_perf_enable(void)
+static const struct pmu pmu;
+
+static inline int is_x86_event(struct perf_event *event)
 {
-	if (!x86_pmu_initialized())
-		return;
-	x86_pmu.enable_all();
+	return event->pmu == &pmu;
 }
 
-static inline u64 intel_pmu_get_status(void)
+static int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
 {
-	u64 status;
+	struct event_constraint *c, *constraints[X86_PMC_IDX_MAX];
+	unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	int i, j, w, wmax, num = 0;
+	struct hw_perf_event *hwc;
 
-	rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
 
-	return status;
-}
+	for (i = 0; i < n; i++) {
+		c = x86_pmu.get_event_constraints(cpuc, cpuc->event_list[i]);
+		constraints[i] = c;
+	}
 
-static inline void intel_pmu_ack_status(u64 ack)
-{
-	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
-}
+	/*
+	 * fastpath, try to reuse previous register
+	 */
+	for (i = 0; i < n; i++) {
+		hwc = &cpuc->event_list[i]->hw;
+		c = constraints[i];
 
-static inline void x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	(void)checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
-}
+		/* never assigned */
+		if (hwc->idx == -1)
+			break;
 
-static inline void x86_pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
+		/* constraint still honored */
+		if (!test_bit(hwc->idx, c->idxmsk))
+			break;
+
+		/* not already used */
+		if (test_bit(hwc->idx, used_mask))
+			break;
+
+		__set_bit(hwc->idx, used_mask);
+		if (assign)
+			assign[i] = hwc->idx;
+	}
+	if (i == n)
+		goto done;
+
+	/*
+	 * begin slow path
+	 */
+
+	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
+
+	/*
+	 * weight = number of possible counters
+	 *
+	 * 1    = most constrained, only works on one counter
+	 * wmax = least constrained, works on any counter
+	 *
+	 * assign events to counters starting with most
+	 * constrained events.
+	 */
+	wmax = x86_pmu.num_counters;
+
+	/*
+	 * when fixed event counters are present,
+	 * wmax is incremented by 1 to account
+	 * for one more choice
+	 */
+	if (x86_pmu.num_counters_fixed)
+		wmax++;
+
+	for (w = 1, num = n; num && w <= wmax; w++) {
+		/* for each event */
+		for (i = 0; num && i < n; i++) {
+			c = constraints[i];
+			hwc = &cpuc->event_list[i]->hw;
+
+			if (c->weight != w)
+				continue;
+
+			for_each_set_bit(j, c->idxmsk, X86_PMC_IDX_MAX) {
+				if (!test_bit(j, used_mask))
+					break;
+			}
+
+			if (j == X86_PMC_IDX_MAX)
+				break;
+
+			__set_bit(j, used_mask);
+
+			if (assign)
+				assign[i] = j;
+			num--;
+		}
+	}
+done:
+	/*
+	 * scheduling failed or is just a simulation,
+	 * free resources if necessary
+	 */
+	if (!assign || num) {
+		for (i = 0; i < n; i++) {
+			if (x86_pmu.put_event_constraints)
+				x86_pmu.put_event_constraints(cpuc, cpuc->event_list[i]);
+		}
+	}
+	return num ? -ENOSPC : 0;
 }
 
-static inline void
-intel_pmu_disable_fixed(struct hw_perf_event *hwc, int __idx)
+/*
+ * dogrp: true if must collect siblings events (group)
+ * returns total number of events and error code
+ */
+static int collect_events(struct cpu_hw_events *cpuc, struct perf_event *leader, bool dogrp)
 {
-	int idx = __idx - X86_PMC_IDX_FIXED;
-	u64 ctrl_val, mask;
+	struct perf_event *event;
+	int n, max_count;
+
+	max_count = x86_pmu.num_counters + x86_pmu.num_counters_fixed;
+
+	/* current number of events already accepted */
+	n = cpuc->n_events;
 
-	mask = 0xfULL << (idx * 4);
+	if (is_x86_event(leader)) {
+		if (n >= max_count)
+			return -ENOSPC;
+		cpuc->event_list[n] = leader;
+		n++;
+	}
+	if (!dogrp)
+		return n;
+
+	list_for_each_entry(event, &leader->sibling_list, group_entry) {
+		if (!is_x86_event(event) ||
+		    event->state <= PERF_EVENT_STATE_OFF)
+			continue;
 
-	rdmsrl(hwc->config_base, ctrl_val);
-	ctrl_val &= ~mask;
-	(void)checking_wrmsrl(hwc->config_base, ctrl_val);
+		if (n >= max_count)
+			return -ENOSPC;
+
+		cpuc->event_list[n] = event;
+		n++;
+	}
+	return n;
 }
 
-static inline void
-p6_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+static inline void x86_assign_hw_event(struct perf_event *event,
+				struct cpu_hw_events *cpuc, int i)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val = P6_NOP_EVENT;
+	struct hw_perf_event *hwc = &event->hw;
 
-	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	hwc->idx = cpuc->assign[i];
+	hwc->last_cpu = smp_processor_id();
+	hwc->last_tag = ++cpuc->tags[i];
+
+	if (hwc->idx == X86_PMC_IDX_FIXED_BTS) {
+		hwc->config_base = 0;
+		hwc->event_base	= 0;
+	} else if (hwc->idx >= X86_PMC_IDX_FIXED) {
+		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
+		/*
+		 * We set it so that event_base + idx in wrmsr/rdmsr maps to
+		 * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2:
+		 */
+		hwc->event_base =
+			MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED;
+	} else {
+		hwc->config_base = x86_pmu.eventsel;
+		hwc->event_base  = x86_pmu.perfctr;
+	}
+}
 
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
+static inline int match_prev_assignment(struct hw_perf_event *hwc,
+					struct cpu_hw_events *cpuc,
+					int i)
+{
+	return hwc->idx == cpuc->assign[i] &&
+		hwc->last_cpu == smp_processor_id() &&
+		hwc->last_tag == cpuc->tags[i];
 }
 
-static inline void
-intel_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+static int x86_pmu_start(struct perf_event *event);
+static void x86_pmu_stop(struct perf_event *event);
+
+void hw_perf_enable(void)
 {
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		intel_pmu_disable_bts();
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int i, added = cpuc->n_added;
+
+	if (!x86_pmu_initialized())
 		return;
-	}
 
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_disable_fixed(hwc, idx);
+	if (cpuc->enabled)
 		return;
+
+	if (cpuc->n_added) {
+		int n_running = cpuc->n_events - cpuc->n_added;
+		/*
+		 * apply assignment obtained either from
+		 * hw_perf_group_sched_in() or x86_pmu_enable()
+		 *
+		 * step1: save events moving to new counters
+		 * step2: reprogram moved events into new counters
+		 */
+		for (i = 0; i < n_running; i++) {
+			event = cpuc->event_list[i];
+			hwc = &event->hw;
+
+			/*
+			 * we can avoid reprogramming counter if:
+			 * - assigned same counter as last time
+			 * - running on same CPU as last time
+			 * - no other event has used the counter since
+			 */
+			if (hwc->idx == -1 ||
+			    match_prev_assignment(hwc, cpuc, i))
+				continue;
+
+			x86_pmu_stop(event);
+		}
+
+		for (i = 0; i < cpuc->n_events; i++) {
+			event = cpuc->event_list[i];
+			hwc = &event->hw;
+
+			if (!match_prev_assignment(hwc, cpuc, i))
+				x86_assign_hw_event(event, cpuc, i);
+			else if (i < n_running)
+				continue;
+
+			x86_pmu_start(event);
+		}
+		cpuc->n_added = 0;
+		perf_events_lapic_init();
 	}
 
-	x86_pmu_disable_event(hwc, idx);
+	cpuc->enabled = 1;
+	barrier();
+
+	x86_pmu.enable_all(added);
+}
+
+static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
+					  u64 enable_mask)
+{
+	wrmsrl(hwc->config_base + hwc->idx, hwc->config | enable_mask);
 }
 
-static inline void
-amd_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+static inline void x86_pmu_disable_event(struct perf_event *event)
 {
-	x86_pmu_disable_event(hwc, idx);
+	struct hw_perf_event *hwc = &event->hw;
+
+	wrmsrl(hwc->config_base + hwc->idx, hwc->config);
 }
 
 static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
@@ -1275,12 +882,12 @@ static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
  * To be called with the event disabled in hw:
  */
 static int
-x86_perf_event_set_period(struct perf_event *event,
-			     struct hw_perf_event *hwc, int idx)
+x86_perf_event_set_period(struct perf_event *event)
 {
+	struct hw_perf_event *hwc = &event->hw;
 	s64 left = atomic64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
-	int err, ret = 0;
+	int ret = 0, idx = hwc->idx;
 
 	if (idx == X86_PMC_IDX_FIXED_BTS)
 		return 0;
@@ -1318,227 +925,82 @@ x86_perf_event_set_period(struct perf_event *event,
 	 */
 	atomic64_set(&hwc->prev_count, (u64)-left);
 
-	err = checking_wrmsrl(hwc->event_base + idx,
-			     (u64)(-left) & x86_pmu.event_mask);
+	wrmsrl(hwc->event_base + idx,
+			(u64)(-left) & x86_pmu.cntval_mask);
 
 	perf_event_update_userpage(event);
 
 	return ret;
 }
 
-static inline void
-intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx)
-{
-	int idx = __idx - X86_PMC_IDX_FIXED;
-	u64 ctrl_val, bits, mask;
-	int err;
-
-	/*
-	 * Enable IRQ generation (0x8),
-	 * and enable ring-3 counting (0x2) and ring-0 counting (0x1)
-	 * if requested:
-	 */
-	bits = 0x8ULL;
-	if (hwc->config & ARCH_PERFMON_EVENTSEL_USR)
-		bits |= 0x2;
-	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
-		bits |= 0x1;
-
-	/*
-	 * ANY bit is supported in v3 and up
-	 */
-	if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY)
-		bits |= 0x4;
-
-	bits <<= (idx * 4);
-	mask = 0xfULL << (idx * 4);
-
-	rdmsrl(hwc->config_base, ctrl_val);
-	ctrl_val &= ~mask;
-	ctrl_val |= bits;
-	err = checking_wrmsrl(hwc->config_base, ctrl_val);
-}
-
-static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+static void x86_pmu_enable_event(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val;
-
-	val = hwc->config;
 	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
+		__x86_pmu_enable_event(&event->hw,
+				       ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
-
-static void intel_pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		if (!__get_cpu_var(cpu_hw_events).enabled)
-			return;
-
-		intel_pmu_enable_bts(hwc->config);
-		return;
-	}
-
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_enable_fixed(hwc, idx);
-		return;
-	}
-
-	x86_pmu_enable_event(hwc, idx);
-}
-
-static void amd_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+/*
+ * activate a single event
+ *
+ * The event is added to the group of enabled events
+ * but only if it can be scehduled with existing events.
+ *
+ * Called with PMU disabled. If successful and return value 1,
+ * then guaranteed to call perf_enable() and hw_perf_enable()
+ */
+static int x86_pmu_enable(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc;
+	int assign[X86_PMC_IDX_MAX];
+	int n, n0, ret;
 
-	if (cpuc->enabled)
-		x86_pmu_enable_event(hwc, idx);
-}
-
-static int fixed_mode_idx(struct hw_perf_event *hwc)
-{
-	unsigned int hw_event;
-
-	hw_event = hwc->config & ARCH_PERFMON_EVENT_MASK;
-
-	if (unlikely((hw_event ==
-		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
-		     (hwc->sample_period == 1)))
-		return X86_PMC_IDX_FIXED_BTS;
+	hwc = &event->hw;
 
-	if (!x86_pmu.num_events_fixed)
-		return -1;
+	n0 = cpuc->n_events;
+	n = collect_events(cpuc, event, false);
+	if (n < 0)
+		return n;
 
 	/*
-	 * fixed counters do not take all possible filters
+	 * If group events scheduling transaction was started,
+	 * skip the schedulability test here, it will be peformed
+	 * at commit time(->commit_txn) as a whole
 	 */
-	if (hwc->config & ARCH_PERFMON_EVENT_FILTER_MASK)
-		return -1;
-
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
-		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
-		return X86_PMC_IDX_FIXED_CPU_CYCLES;
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
-		return X86_PMC_IDX_FIXED_BUS_CYCLES;
+	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+		goto out;
 
-	return -1;
-}
-
-/*
- * generic counter allocator: get next free counter
- */
-static int
-gen_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
-{
-	int idx;
-
-	idx = find_first_zero_bit(cpuc->used_mask, x86_pmu.num_events);
-	return idx == x86_pmu.num_events ? -1 : idx;
-}
-
-/*
- * intel-specific counter allocator: check event constraints
- */
-static int
-intel_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
-{
-	const struct event_constraint *event_constraint;
-	int i, code;
-
-	if (!event_constraints)
-		goto skip;
-
-	code = hwc->config & CORE_EVNTSEL_EVENT_MASK;
-
-	for_each_event_constraint(event_constraint, event_constraints) {
-		if (code == event_constraint->code) {
-			for_each_bit(i, event_constraint->idxmsk, X86_PMC_IDX_MAX) {
-				if (!test_and_set_bit(i, cpuc->used_mask))
-					return i;
-			}
-			return -1;
-		}
-	}
-skip:
-	return gen_get_event_idx(cpuc, hwc);
-}
-
-static int
-x86_schedule_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
-{
-	int idx;
-
-	idx = fixed_mode_idx(hwc);
-	if (idx == X86_PMC_IDX_FIXED_BTS) {
-		/* BTS is already occupied. */
-		if (test_and_set_bit(idx, cpuc->used_mask))
-			return -EAGAIN;
-
-		hwc->config_base	= 0;
-		hwc->event_base		= 0;
-		hwc->idx		= idx;
-	} else if (idx >= 0) {
-		/*
-		 * Try to get the fixed event, if that is already taken
-		 * then try to get a generic event:
-		 */
-		if (test_and_set_bit(idx, cpuc->used_mask))
-			goto try_generic;
+	ret = x86_pmu.schedule_events(cpuc, n, assign);
+	if (ret)
+		return ret;
+	/*
+	 * copy new assignment, now we know it is possible
+	 * will be used by hw_perf_enable()
+	 */
+	memcpy(cpuc->assign, assign, n*sizeof(int));
 
-		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
-		/*
-		 * We set it so that event_base + idx in wrmsr/rdmsr maps to
-		 * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2:
-		 */
-		hwc->event_base =
-			MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED;
-		hwc->idx = idx;
-	} else {
-		idx = hwc->idx;
-		/* Try to get the previous generic event again */
-		if (idx == -1 || test_and_set_bit(idx, cpuc->used_mask)) {
-try_generic:
-			idx = x86_pmu.get_event_idx(cpuc, hwc);
-			if (idx == -1)
-				return -EAGAIN;
-
-			set_bit(idx, cpuc->used_mask);
-			hwc->idx = idx;
-		}
-		hwc->config_base = x86_pmu.eventsel;
-		hwc->event_base  = x86_pmu.perfctr;
-	}
+out:
+	cpuc->n_events = n;
+	cpuc->n_added += n - n0;
+	cpuc->n_txn += n - n0;
 
-	return idx;
+	return 0;
 }
 
-/*
- * Find a PMC slot for the freshly enabled / scheduled in event:
- */
-static int x86_pmu_enable(struct perf_event *event)
+static int x86_pmu_start(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx;
+	int idx = event->hw.idx;
 
-	idx = x86_schedule_event(cpuc, hwc);
-	if (idx < 0)
-		return idx;
-
-	perf_events_lapic_init();
-
-	x86_pmu.disable(hwc, idx);
+	if (idx == -1)
+		return -EAGAIN;
 
+	x86_perf_event_set_period(event);
 	cpuc->events[idx] = event;
-	set_bit(idx, cpuc->active_mask);
-
-	x86_perf_event_set_period(event, hwc, idx);
-	x86_pmu.enable(hwc, idx);
-
+	__set_bit(idx, cpuc->active_mask);
+	x86_pmu.enable(event);
 	perf_event_update_userpage(event);
 
 	return 0;
@@ -1546,24 +1008,19 @@ static int x86_pmu_enable(struct perf_event *event)
 
 static void x86_pmu_unthrottle(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-
-	if (WARN_ON_ONCE(hwc->idx >= X86_PMC_IDX_MAX ||
-				cpuc->events[hwc->idx] != event))
-		return;
-
-	x86_pmu.enable(hwc, hwc->idx);
+	int ret = x86_pmu_start(event);
+	WARN_ON_ONCE(ret);
 }
 
 void perf_event_print_debug(void)
 {
 	u64 ctrl, status, overflow, pmc_ctrl, pmc_count, prev_left, fixed;
+	u64 pebs;
 	struct cpu_hw_events *cpuc;
 	unsigned long flags;
 	int cpu, idx;
 
-	if (!x86_pmu.num_events)
+	if (!x86_pmu.num_counters)
 		return;
 
 	local_irq_save(flags);
@@ -1576,16 +1033,18 @@ void perf_event_print_debug(void)
 		rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
 		rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
 		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR_CTRL, fixed);
+		rdmsrl(MSR_IA32_PEBS_ENABLE, pebs);
 
 		pr_info("\n");
 		pr_info("CPU#%d: ctrl:       %016llx\n", cpu, ctrl);
 		pr_info("CPU#%d: status:     %016llx\n", cpu, status);
 		pr_info("CPU#%d: overflow:   %016llx\n", cpu, overflow);
 		pr_info("CPU#%d: fixed:      %016llx\n", cpu, fixed);
+		pr_info("CPU#%d: pebs:       %016llx\n", cpu, pebs);
 	}
-	pr_info("CPU#%d: used:       %016llx\n", cpu, *(u64 *)cpuc->used_mask);
+	pr_info("CPU#%d: active:     %016llx\n", cpu, *(u64 *)cpuc->active_mask);
 
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
 		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
 
@@ -1598,7 +1057,7 @@ void perf_event_print_debug(void)
 		pr_info("CPU#%d:   gen-PMC%d left:  %016llx\n",
 			cpu, idx, prev_left);
 	}
-	for (idx = 0; idx < x86_pmu.num_events_fixed; idx++) {
+	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
 		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, pmc_count);
 
 		pr_info("CPU#%d: fixed-PMC%d count: %016llx\n",
@@ -1607,257 +1066,58 @@ void perf_event_print_debug(void)
 	local_irq_restore(flags);
 }
 
-static void intel_pmu_drain_bts_buffer(struct cpu_hw_events *cpuc)
-{
-	struct debug_store *ds = cpuc->ds;
-	struct bts_record {
-		u64	from;
-		u64	to;
-		u64	flags;
-	};
-	struct perf_event *event = cpuc->events[X86_PMC_IDX_FIXED_BTS];
-	struct bts_record *at, *top;
-	struct perf_output_handle handle;
-	struct perf_event_header header;
-	struct perf_sample_data data;
-	struct pt_regs regs;
-
-	if (!event)
-		return;
-
-	if (!ds)
-		return;
-
-	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
-	top = (struct bts_record *)(unsigned long)ds->bts_index;
-
-	if (top <= at)
-		return;
-
-	ds->bts_index = ds->bts_buffer_base;
-
-
-	data.period	= event->hw.last_period;
-	data.addr	= 0;
-	data.raw	= NULL;
-	regs.ip		= 0;
-
-	/*
-	 * Prepare a generic sample, i.e. fill in the invariant fields.
-	 * We will overwrite the from and to address before we output
-	 * the sample.
-	 */
-	perf_prepare_sample(&header, &data, event, &regs);
-
-	if (perf_output_begin(&handle, event,
-			      header.size * (top - at), 1, 1))
-		return;
-
-	for (; at < top; at++) {
-		data.ip		= at->from;
-		data.addr	= at->to;
-
-		perf_output_sample(&handle, &header, &data, event);
-	}
-
-	perf_output_end(&handle);
-
-	/* There's new data available. */
-	event->hw.interrupts++;
-	event->pending_kill = POLL_IN;
-}
-
-static void x86_pmu_disable(struct perf_event *event)
+static void x86_pmu_stop(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 
-	/*
-	 * Must be done before we disable, otherwise the nmi handler
-	 * could reenable again:
-	 */
-	clear_bit(idx, cpuc->active_mask);
-	x86_pmu.disable(hwc, idx);
+	if (!__test_and_clear_bit(idx, cpuc->active_mask))
+		return;
 
-	/*
-	 * Make sure the cleared pointer becomes visible before we
-	 * (potentially) free the event:
-	 */
-	barrier();
+	x86_pmu.disable(event);
 
 	/*
 	 * Drain the remaining delta count out of a event
 	 * that we are disabling:
 	 */
-	x86_perf_event_update(event, hwc, idx);
-
-	/* Drain the remaining BTS records. */
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS))
-		intel_pmu_drain_bts_buffer(cpuc);
+	x86_perf_event_update(event);
 
 	cpuc->events[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
-
-	perf_event_update_userpage(event);
-}
-
-/*
- * Save and restart an expired event. Called by NMI contexts,
- * so it has to be careful about preempting normal event ops:
- */
-static int intel_pmu_save_and_restart(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	int ret;
-
-	x86_perf_event_update(event, hwc, idx);
-	ret = x86_perf_event_set_period(event, hwc, idx);
-
-	if (event->state == PERF_EVENT_STATE_ACTIVE)
-		intel_pmu_enable_event(hwc, idx);
-
-	return ret;
 }
 
-static void intel_pmu_reset(void)
+static void x86_pmu_disable(struct perf_event *event)
 {
-	struct debug_store *ds = __get_cpu_var(cpu_hw_events).ds;
-	unsigned long flags;
-	int idx;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int i;
 
-	if (!x86_pmu.num_events)
+	/*
+	 * If we're called during a txn, we don't need to do anything.
+	 * The events never got scheduled and ->cancel_txn will truncate
+	 * the event_list.
+	 */
+	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
 		return;
 
-	local_irq_save(flags);
-
-	printk("clearing PMU state on CPU#%d\n", smp_processor_id());
-
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
-		checking_wrmsrl(x86_pmu.eventsel + idx, 0ull);
-		checking_wrmsrl(x86_pmu.perfctr  + idx, 0ull);
-	}
-	for (idx = 0; idx < x86_pmu.num_events_fixed; idx++) {
-		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
-	}
-	if (ds)
-		ds->bts_index = ds->bts_buffer_base;
-
-	local_irq_restore(flags);
-}
-
-static int p6_pmu_handle_irq(struct pt_regs *regs)
-{
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct perf_event *event;
-	struct hw_perf_event *hwc;
-	int idx, handled = 0;
-	u64 val;
-
-	data.addr = 0;
-	data.raw = NULL;
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		event = cpuc->events[idx];
-		hwc = &event->hw;
-
-		val = x86_perf_event_update(event, hwc, idx);
-		if (val & (1ULL << (x86_pmu.event_bits - 1)))
-			continue;
-
-		/*
-		 * event overflow
-		 */
-		handled		= 1;
-		data.period	= event->hw.last_period;
-
-		if (!x86_perf_event_set_period(event, hwc, idx))
-			continue;
+	x86_pmu_stop(event);
 
-		if (perf_event_overflow(event, 1, &data, regs))
-			p6_pmu_disable_event(hwc, idx);
-	}
+	for (i = 0; i < cpuc->n_events; i++) {
+		if (event == cpuc->event_list[i]) {
 
-	if (handled)
-		inc_irq_stat(apic_perf_irqs);
+			if (x86_pmu.put_event_constraints)
+				x86_pmu.put_event_constraints(cpuc, event);
 
-	return handled;
-}
-
-/*
- * This handler is triggered by the local APIC, so the APIC IRQ handling
- * rules apply:
- */
-static int intel_pmu_handle_irq(struct pt_regs *regs)
-{
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	int bit, loops;
-	u64 ack, status;
+			while (++i < cpuc->n_events)
+				cpuc->event_list[i-1] = cpuc->event_list[i];
 
-	data.addr = 0;
-	data.raw = NULL;
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-
-	perf_disable();
-	intel_pmu_drain_bts_buffer(cpuc);
-	status = intel_pmu_get_status();
-	if (!status) {
-		perf_enable();
-		return 0;
-	}
-
-	loops = 0;
-again:
-	if (++loops > 100) {
-		WARN_ONCE(1, "perfevents: irq loop stuck!\n");
-		perf_event_print_debug();
-		intel_pmu_reset();
-		perf_enable();
-		return 1;
-	}
-
-	inc_irq_stat(apic_perf_irqs);
-	ack = status;
-	for_each_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
-		struct perf_event *event = cpuc->events[bit];
-
-		clear_bit(bit, (unsigned long *) &status);
-		if (!test_bit(bit, cpuc->active_mask))
-			continue;
-
-		if (!intel_pmu_save_and_restart(event))
-			continue;
-
-		data.period = event->hw.last_period;
-
-		if (perf_event_overflow(event, 1, &data, regs))
-			intel_pmu_disable_event(&event->hw, bit);
+			--cpuc->n_events;
+			break;
+		}
 	}
-
-	intel_pmu_ack_status(ack);
-
-	/*
-	 * Repeat if there is more work to be done:
-	 */
-	status = intel_pmu_get_status();
-	if (status)
-		goto again;
-
-	perf_enable();
-
-	return 1;
+	perf_event_update_userpage(event);
 }
 
-static int amd_pmu_handle_irq(struct pt_regs *regs)
+static int x86_pmu_handle_irq(struct pt_regs *regs)
 {
 	struct perf_sample_data data;
 	struct cpu_hw_events *cpuc;
@@ -1866,20 +1126,19 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	data.addr = 0;
-	data.raw = NULL;
+	perf_sample_data_init(&data, 0);
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
-	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
 
 		event = cpuc->events[idx];
 		hwc = &event->hw;
 
-		val = x86_perf_event_update(event, hwc, idx);
-		if (val & (1ULL << (x86_pmu.event_bits - 1)))
+		val = x86_perf_event_update(event);
+		if (val & (1ULL << (x86_pmu.cntval_bits - 1)))
 			continue;
 
 		/*
@@ -1888,11 +1147,11 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 		handled		= 1;
 		data.period	= event->hw.last_period;
 
-		if (!x86_perf_event_set_period(event, hwc, idx))
+		if (!x86_perf_event_set_period(event))
 			continue;
 
 		if (perf_event_overflow(event, 1, &data, regs))
-			amd_pmu_disable_event(hwc, idx);
+			x86_pmu_stop(event);
 	}
 
 	if (handled)
@@ -1922,7 +1181,6 @@ void set_perf_event_pending(void)
 
 void perf_events_lapic_init(void)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	if (!x86_pmu.apic || !x86_pmu_initialized())
 		return;
 
@@ -1930,7 +1188,6 @@ void perf_events_lapic_init(void)
 	 * Always use NMI for PMU
 	 */
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-#endif
 }
 
 static int __kprobes
@@ -1954,9 +1211,7 @@ perf_event_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
-#ifdef CONFIG_X86_LOCAL_APIC
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-#endif
 	/*
 	 * Can't rely on the handled return value to say it was our NMI, two
 	 * events could trigger 'simultaneously' raising two back-to-back NMIs.
@@ -1975,193 +1230,64 @@ static __read_mostly struct notifier_block perf_event_nmi_notifier = {
 	.priority		= 1
 };
 
-static __initconst struct x86_pmu p6_pmu = {
-	.name			= "p6",
-	.handle_irq		= p6_pmu_handle_irq,
-	.disable_all		= p6_pmu_disable_all,
-	.enable_all		= p6_pmu_enable_all,
-	.enable			= p6_pmu_enable_event,
-	.disable		= p6_pmu_disable_event,
-	.eventsel		= MSR_P6_EVNTSEL0,
-	.perfctr		= MSR_P6_PERFCTR0,
-	.event_map		= p6_pmu_event_map,
-	.raw_event		= p6_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
-	.apic			= 1,
-	.max_period		= (1ULL << 31) - 1,
-	.version		= 0,
-	.num_events		= 2,
-	/*
-	 * Events have 40 bits implemented. However they are designed such
-	 * that bits [32-39] are sign extensions of bit 31. As such the
-	 * effective width of a event for P6-like PMU is 32 bits only.
-	 *
-	 * See IA-32 Intel Architecture Software developer manual Vol 3B
-	 */
-	.event_bits		= 32,
-	.event_mask		= (1ULL << 32) - 1,
-	.get_event_idx		= intel_get_event_idx,
-};
-
-static __initconst struct x86_pmu intel_pmu = {
-	.name			= "Intel",
-	.handle_irq		= intel_pmu_handle_irq,
-	.disable_all		= intel_pmu_disable_all,
-	.enable_all		= intel_pmu_enable_all,
-	.enable			= intel_pmu_enable_event,
-	.disable		= intel_pmu_disable_event,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.raw_event		= intel_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic event period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.enable_bts		= intel_pmu_enable_bts,
-	.disable_bts		= intel_pmu_disable_bts,
-	.get_event_idx		= intel_get_event_idx,
-};
-
-static __initconst struct x86_pmu amd_pmu = {
-	.name			= "AMD",
-	.handle_irq		= amd_pmu_handle_irq,
-	.disable_all		= amd_pmu_disable_all,
-	.enable_all		= amd_pmu_enable_all,
-	.enable			= amd_pmu_enable_event,
-	.disable		= amd_pmu_disable_event,
-	.eventsel		= MSR_K7_EVNTSEL0,
-	.perfctr		= MSR_K7_PERFCTR0,
-	.event_map		= amd_pmu_event_map,
-	.raw_event		= amd_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
-	.num_events		= 4,
-	.event_bits		= 48,
-	.event_mask		= (1ULL << 48) - 1,
-	.apic			= 1,
-	/* use highest bit to detect overflow */
-	.max_period		= (1ULL << 47) - 1,
-	.get_event_idx		= gen_get_event_idx,
-};
+static struct event_constraint unconstrained;
+static struct event_constraint emptyconstraint;
 
-static __init int p6_pmu_init(void)
+static struct event_constraint *
+x86_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
 {
-	switch (boot_cpu_data.x86_model) {
-	case 1:
-	case 3:  /* Pentium Pro */
-	case 5:
-	case 6:  /* Pentium II */
-	case 7:
-	case 8:
-	case 11: /* Pentium III */
-		event_constraints = intel_p6_event_constraints;
-		break;
-	case 9:
-	case 13:
-		/* Pentium M */
-		event_constraints = intel_p6_event_constraints;
-		break;
-	default:
-		pr_cont("unsupported p6 CPU model %d ",
-			boot_cpu_data.x86_model);
-		return -ENODEV;
-	}
+	struct event_constraint *c;
 
-	x86_pmu = p6_pmu;
+	if (x86_pmu.event_constraints) {
+		for_each_event_constraint(c, x86_pmu.event_constraints) {
+			if ((event->hw.config & c->cmask) == c->code)
+				return c;
+		}
+	}
 
-	return 0;
+	return &unconstrained;
 }
 
-static __init int intel_pmu_init(void)
-{
-	union cpuid10_edx edx;
-	union cpuid10_eax eax;
-	unsigned int unused;
-	unsigned int ebx;
-	int version;
-
-	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
-		/* check for P6 processor family */
-	   if (boot_cpu_data.x86 == 6) {
-		return p6_pmu_init();
-	   } else {
-		return -ENODEV;
-	   }
-	}
+#include "perf_event_amd.c"
+#include "perf_event_p6.c"
+#include "perf_event_p4.c"
+#include "perf_event_intel_lbr.c"
+#include "perf_event_intel_ds.c"
+#include "perf_event_intel.c"
 
-	/*
-	 * Check whether the Architectural PerfMon supports
-	 * Branch Misses Retired hw_event or not.
-	 */
-	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
-	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
-		return -ENODEV;
-
-	version = eax.split.version_id;
-	if (version < 2)
-		return -ENODEV;
+static int __cpuinit
+x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+	int ret = NOTIFY_OK;
 
-	x86_pmu				= intel_pmu;
-	x86_pmu.version			= version;
-	x86_pmu.num_events		= eax.split.num_events;
-	x86_pmu.event_bits		= eax.split.bit_width;
-	x86_pmu.event_mask		= (1ULL << eax.split.bit_width) - 1;
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_UP_PREPARE:
+		if (x86_pmu.cpu_prepare)
+			ret = x86_pmu.cpu_prepare(cpu);
+		break;
 
-	/*
-	 * Quirk: v2 perfmon does not report fixed-purpose events, so
-	 * assume at least 3 events:
-	 */
-	x86_pmu.num_events_fixed	= max((int)edx.split.num_events_fixed, 3);
+	case CPU_STARTING:
+		if (x86_pmu.cpu_starting)
+			x86_pmu.cpu_starting(cpu);
+		break;
 
-	/*
-	 * Install the hw-cache-events table:
-	 */
-	switch (boot_cpu_data.x86_model) {
-	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
-	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
-	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
-	case 29: /* six-core 45 nm xeon "Dunnington" */
-		memcpy(hw_cache_event_ids, core2_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
-
-		pr_cont("Core2 events, ");
-		event_constraints = intel_core_event_constraints;
+	case CPU_DYING:
+		if (x86_pmu.cpu_dying)
+			x86_pmu.cpu_dying(cpu);
 		break;
-	default:
-	case 26:
-		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
 
-		event_constraints = intel_nehalem_event_constraints;
-		pr_cont("Nehalem/Corei7 events, ");
+	case CPU_UP_CANCELED:
+	case CPU_DEAD:
+		if (x86_pmu.cpu_dead)
+			x86_pmu.cpu_dead(cpu);
 		break;
-	case 28:
-		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
 
-		pr_cont("Atom events, ");
+	default:
 		break;
 	}
-	return 0;
-}
-
-static __init int amd_pmu_init(void)
-{
-	/* Performance-monitoring supported from K7 and later: */
-	if (boot_cpu_data.x86 < 6)
-		return -ENODEV;
-
-	x86_pmu = amd_pmu;
-
-	/* Events are common for all AMDs */
-	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
-	       sizeof(hw_cache_event_ids));
 
-	return 0;
+	return ret;
 }
 
 static void __init pmu_check_apic(void)
@@ -2176,6 +1302,7 @@ static void __init pmu_check_apic(void)
 
 void __init init_hw_perf_events(void)
 {
+	struct event_constraint *c;
 	int err;
 
 	pr_info("Performance Events: ");
@@ -2199,88 +1326,231 @@ void __init init_hw_perf_events(void)
 
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
-	if (x86_pmu.num_events > X86_PMC_MAX_GENERIC) {
+	if (x86_pmu.quirks)
+		x86_pmu.quirks();
+
+	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
 		WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
-		     x86_pmu.num_events, X86_PMC_MAX_GENERIC);
-		x86_pmu.num_events = X86_PMC_MAX_GENERIC;
+		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 	}
-	perf_event_mask = (1 << x86_pmu.num_events) - 1;
-	perf_max_events = x86_pmu.num_events;
+	x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1;
+	perf_max_events = x86_pmu.num_counters;
 
-	if (x86_pmu.num_events_fixed > X86_PMC_MAX_FIXED) {
+	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
 		WARN(1, KERN_ERR "hw perf events fixed %d > max(%d), clipping!",
-		     x86_pmu.num_events_fixed, X86_PMC_MAX_FIXED);
-		x86_pmu.num_events_fixed = X86_PMC_MAX_FIXED;
+		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 	}
 
-	perf_event_mask |=
-		((1LL << x86_pmu.num_events_fixed)-1) << X86_PMC_IDX_FIXED;
-	x86_pmu.intel_ctrl = perf_event_mask;
+	x86_pmu.intel_ctrl |=
+		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
 
 	perf_events_lapic_init();
 	register_die_notifier(&perf_event_nmi_notifier);
 
+	unconstrained = (struct event_constraint)
+		__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
+				   0, x86_pmu.num_counters);
+
+	if (x86_pmu.event_constraints) {
+		for_each_event_constraint(c, x86_pmu.event_constraints) {
+			if (c->cmask != X86_RAW_EVENT_MASK)
+				continue;
+
+			c->idxmsk64 |= (1ULL << x86_pmu.num_counters) - 1;
+			c->weight += x86_pmu.num_counters;
+		}
+	}
+
 	pr_info("... version:                %d\n",     x86_pmu.version);
-	pr_info("... bit width:              %d\n",     x86_pmu.event_bits);
-	pr_info("... generic registers:      %d\n",     x86_pmu.num_events);
-	pr_info("... value mask:             %016Lx\n", x86_pmu.event_mask);
+	pr_info("... bit width:              %d\n",     x86_pmu.cntval_bits);
+	pr_info("... generic registers:      %d\n",     x86_pmu.num_counters);
+	pr_info("... value mask:             %016Lx\n", x86_pmu.cntval_mask);
 	pr_info("... max period:             %016Lx\n", x86_pmu.max_period);
-	pr_info("... fixed-purpose events:   %d\n",     x86_pmu.num_events_fixed);
-	pr_info("... event mask:             %016Lx\n", perf_event_mask);
+	pr_info("... fixed-purpose events:   %d\n",     x86_pmu.num_counters_fixed);
+	pr_info("... event mask:             %016Lx\n", x86_pmu.intel_ctrl);
+
+	perf_cpu_notifier(x86_pmu_notifier);
 }
 
 static inline void x86_pmu_read(struct perf_event *event)
 {
-	x86_perf_event_update(event, &event->hw, event->hw.idx);
+	x86_perf_event_update(event);
+}
+
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+static void x86_pmu_start_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuc->n_txn = 0;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+static void x86_pmu_cancel_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->group_flag &= ~PERF_EVENT_TXN_STARTED;
+	/*
+	 * Truncate the collected events.
+	 */
+	cpuc->n_added -= cpuc->n_txn;
+	cpuc->n_events -= cpuc->n_txn;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+static int x86_pmu_commit_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int assign[X86_PMC_IDX_MAX];
+	int n, ret;
+
+	n = cpuc->n_events;
+
+	if (!x86_pmu_initialized())
+		return -EAGAIN;
+
+	ret = x86_pmu.schedule_events(cpuc, n, assign);
+	if (ret)
+		return ret;
+
+	/*
+	 * copy new assignment, now we know it is possible
+	 * will be used by hw_perf_enable()
+	 */
+	memcpy(cpuc->assign, assign, n*sizeof(int));
+
+	/*
+	 * Clear out the txn count so that ->cancel_txn() which gets
+	 * run after ->commit_txn() doesn't undo things.
+	 */
+	cpuc->n_txn = 0;
+
+	return 0;
 }
 
 static const struct pmu pmu = {
 	.enable		= x86_pmu_enable,
 	.disable	= x86_pmu_disable,
+	.start		= x86_pmu_start,
+	.stop		= x86_pmu_stop,
 	.read		= x86_pmu_read,
 	.unthrottle	= x86_pmu_unthrottle,
+	.start_txn	= x86_pmu_start_txn,
+	.cancel_txn	= x86_pmu_cancel_txn,
+	.commit_txn	= x86_pmu_commit_txn,
 };
 
-static int
-validate_event(struct cpu_hw_events *cpuc, struct perf_event *event)
+/*
+ * validate that we can schedule this event
+ */
+static int validate_event(struct perf_event *event)
 {
-	struct hw_perf_event fake_event = event->hw;
+	struct cpu_hw_events *fake_cpuc;
+	struct event_constraint *c;
+	int ret = 0;
 
-	if (event->pmu && event->pmu != &pmu)
-		return 0;
+	fake_cpuc = kmalloc(sizeof(*fake_cpuc), GFP_KERNEL | __GFP_ZERO);
+	if (!fake_cpuc)
+		return -ENOMEM;
+
+	c = x86_pmu.get_event_constraints(fake_cpuc, event);
+
+	if (!c || !c->weight)
+		ret = -ENOSPC;
 
-	return x86_schedule_event(cpuc, &fake_event) >= 0;
+	if (x86_pmu.put_event_constraints)
+		x86_pmu.put_event_constraints(fake_cpuc, event);
+
+	kfree(fake_cpuc);
+
+	return ret;
 }
 
+/*
+ * validate a single event group
+ *
+ * validation include:
+ *	- check events are compatible which each other
+ *	- events do not compete for the same counter
+ *	- number of events <= number of counters
+ *
+ * validation ensures the group can be loaded onto the
+ * PMU if it was the only group available.
+ */
 static int validate_group(struct perf_event *event)
 {
-	struct perf_event *sibling, *leader = event->group_leader;
-	struct cpu_hw_events fake_pmu;
+	struct perf_event *leader = event->group_leader;
+	struct cpu_hw_events *fake_cpuc;
+	int ret, n;
+
+	ret = -ENOMEM;
+	fake_cpuc = kmalloc(sizeof(*fake_cpuc), GFP_KERNEL | __GFP_ZERO);
+	if (!fake_cpuc)
+		goto out;
 
-	memset(&fake_pmu, 0, sizeof(fake_pmu));
+	/*
+	 * the event is not yet connected with its
+	 * siblings therefore we must first collect
+	 * existing siblings, then add the new event
+	 * before we can simulate the scheduling
+	 */
+	ret = -ENOSPC;
+	n = collect_events(fake_cpuc, leader, true);
+	if (n < 0)
+		goto out_free;
 
-	if (!validate_event(&fake_pmu, leader))
-		return -ENOSPC;
+	fake_cpuc->n_events = n;
+	n = collect_events(fake_cpuc, event, false);
+	if (n < 0)
+		goto out_free;
 
-	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
-		if (!validate_event(&fake_pmu, sibling))
-			return -ENOSPC;
-	}
+	fake_cpuc->n_events = n;
 
-	if (!validate_event(&fake_pmu, event))
-		return -ENOSPC;
+	ret = x86_pmu.schedule_events(fake_cpuc, n, NULL);
 
-	return 0;
+out_free:
+	kfree(fake_cpuc);
+out:
+	return ret;
 }
 
 const struct pmu *hw_perf_event_init(struct perf_event *event)
 {
+	const struct pmu *tmp;
 	int err;
 
 	err = __hw_perf_event_init(event);
 	if (!err) {
+		/*
+		 * we temporarily connect event to its pmu
+		 * such that validate_group() can classify
+		 * it as an x86 event using is_x86_event()
+		 */
+		tmp = event->pmu;
+		event->pmu = &pmu;
+
 		if (event->group_leader != event)
 			err = validate_group(event);
+		else
+			err = validate_event(event);
+
+		event->pmu = tmp;
 	}
 	if (err) {
 		if (event->destroy)
@@ -2304,7 +1574,6 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 
 static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
 static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
-static DEFINE_PER_CPU(int, in_ignored_frame);
 
 
 static void
@@ -2320,10 +1589,6 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	per_cpu(in_ignored_frame, smp_processor_id()) =
-			x86_is_stack_id(NMI_STACK, name) ||
-			x86_is_stack_id(DEBUG_STACK, name);
-
 	return 0;
 }
 
@@ -2331,11 +1596,7 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
-	if (per_cpu(in_ignored_frame, smp_processor_id()))
-		return;
-
-	if (reliable)
-		callchain_store(entry, addr);
+	callchain_store(entry, addr);
 }
 
 static const struct stacktrace_ops backtrace_ops = {
@@ -2357,49 +1618,42 @@ perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
 	dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry);
 }
 
-/*
- * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
- */
-static unsigned long
-copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
+#ifdef CONFIG_COMPAT
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
-	unsigned long offset, addr = (unsigned long)from;
-	int type = in_nmi() ? KM_NMI : KM_IRQ0;
-	unsigned long size, len = 0;
-	struct page *page;
-	void *map;
-	int ret;
-
-	do {
-		ret = __get_user_pages_fast(addr, 1, 0, &page);
-		if (!ret)
-			break;
+	/* 32-bit process in 64-bit kernel. */
+	struct stack_frame_ia32 frame;
+	const void __user *fp;
 
-		offset = addr & (PAGE_SIZE - 1);
-		size = min(PAGE_SIZE - offset, n - len);
+	if (!test_thread_flag(TIF_IA32))
+		return 0;
 
-		map = kmap_atomic(page, type);
-		memcpy(to, map+offset, size);
-		kunmap_atomic(map, type);
-		put_page(page);
+	fp = compat_ptr(regs->bp);
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		unsigned long bytes;
+		frame.next_frame     = 0;
+		frame.return_address = 0;
 
-		len  += size;
-		to   += size;
-		addr += size;
+		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (bytes != sizeof(frame))
+			break;
 
-	} while (len < n);
+		if (fp < compat_ptr(regs->sp))
+			break;
 
-	return len;
+		callchain_store(entry, frame.return_address);
+		fp = compat_ptr(frame.next_frame);
+	}
+	return 1;
 }
-
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+#else
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
-	unsigned long bytes;
-
-	bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
-
-	return bytes == sizeof(*frame);
+    return 0;
 }
+#endif
 
 static void
 perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
@@ -2415,11 +1669,16 @@ perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
 	callchain_store(entry, PERF_CONTEXT_USER);
 	callchain_store(entry, regs->ip);
 
+	if (perf_callchain_user32(regs, entry))
+		return;
+
 	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		unsigned long bytes;
 		frame.next_frame	     = NULL;
 		frame.return_address = 0;
 
-		if (!copy_stack_frame(fp, &frame))
+		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (bytes != sizeof(frame))
 			break;
 
 		if ((unsigned long)fp < regs->sp)
@@ -2440,9 +1699,6 @@ perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
 
 	is_user = user_mode(regs);
 
-	if (!current || current->pid == 0)
-		return;
-
 	if (is_user && current->state != TASK_RUNNING)
 		return;
 
@@ -2457,6 +1713,11 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 {
 	struct perf_callchain_entry *entry;
 
+	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+		/* TODO: We don't support guest os callchain now */
+		return NULL;
+	}
+
 	if (in_nmi())
 		entry = &__get_cpu_var(pmc_nmi_entry);
 	else
@@ -2469,7 +1730,52 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return entry;
 }
 
-void hw_perf_event_setup_online(int cpu)
+void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
+{
+	regs->ip = ip;
+	/*
+	 * perf_arch_fetch_caller_regs adds another call, we need to increment
+	 * the skip level
+	 */
+	regs->bp = rewind_frame_pointer(skip + 1);
+	regs->cs = __KERNEL_CS;
+	/*
+	 * We abuse bit 3 to pass exact information, see perf_misc_flags
+	 * and the comment with PERF_EFLAGS_EXACT.
+	 */
+	regs->flags = 0;
+}
+
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	init_debug_store_on_cpu(cpu);
+	unsigned long ip;
+
+	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
+		ip = perf_guest_cbs->get_guest_ip();
+	else
+		ip = instruction_pointer(regs);
+
+	return ip;
+}
+
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+	int misc = 0;
+
+	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+		if (perf_guest_cbs->is_user_mode())
+			misc |= PERF_RECORD_MISC_GUEST_USER;
+		else
+			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
+	} else {
+		if (user_mode(regs))
+			misc |= PERF_RECORD_MISC_USER;
+		else
+			misc |= PERF_RECORD_MISC_KERNEL;
+	}
+
+	if (regs->flags & PERF_EFLAGS_EXACT)
+		misc |= PERF_RECORD_MISC_EXACT_IP;
+
+	return misc;
 }
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
new file mode 100644
index 0000000..c2897b7
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -0,0 +1,420 @@
+#ifdef CONFIG_CPU_SUP_AMD
+
+static DEFINE_RAW_SPINLOCK(amd_nb_lock);
+
+static __initconst const u64 amd_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts  */
+		[ C(RESULT_MISS)   ] = 0x0167, /* Data Prefetcher :cancelled */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction cache fetches  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* Instruction cache misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */
+		[ C(RESULT_MISS)   ] = 0x037E, /* L2 Cache Misses : IC+DC     */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback           */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0046, /* L1 DTLB and L2 DLTB Miss   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction fecthes        */
+		[ C(RESULT_MISS)   ] = 0x0085, /* Instr. fetch ITLB misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c2, /* Retired Branch Instr.      */
+		[ C(RESULT_MISS)   ] = 0x00c3, /* Retired Mispredicted BI    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+/*
+ * AMD Performance Monitor K7 and later.
+ */
+static const u64 amd_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c2,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c3,
+};
+
+static u64 amd_pmu_event_map(int hw_event)
+{
+	return amd_perfmon_event_map[hw_event];
+}
+
+static int amd_pmu_hw_config(struct perf_event *event)
+{
+	int ret = x86_pmu_hw_config(event);
+
+	if (ret)
+		return ret;
+
+	if (event->attr.type != PERF_TYPE_RAW)
+		return 0;
+
+	event->hw.config |= event->attr.config & AMD64_RAW_EVENT_MASK;
+
+	return 0;
+}
+
+/*
+ * AMD64 events are detected based on their event codes.
+ */
+static inline int amd_is_nb_event(struct hw_perf_event *hwc)
+{
+	return (hwc->config & 0xe0) == 0xe0;
+}
+
+static inline int amd_has_nb(struct cpu_hw_events *cpuc)
+{
+	struct amd_nb *nb = cpuc->amd_nb;
+
+	return nb && nb->nb_id != -1;
+}
+
+static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
+				      struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct amd_nb *nb = cpuc->amd_nb;
+	int i;
+
+	/*
+	 * only care about NB events
+	 */
+	if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
+		return;
+
+	/*
+	 * need to scan whole list because event may not have
+	 * been assigned during scheduling
+	 *
+	 * no race condition possible because event can only
+	 * be removed on one CPU at a time AND PMU is disabled
+	 * when we come here
+	 */
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		if (nb->owners[i] == event) {
+			cmpxchg(nb->owners+i, event, NULL);
+			break;
+		}
+	}
+}
+
+ /*
+  * AMD64 NorthBridge events need special treatment because
+  * counter access needs to be synchronized across all cores
+  * of a package. Refer to BKDG section 3.12
+  *
+  * NB events are events measuring L3 cache, Hypertransport
+  * traffic. They are identified by an event code >= 0xe00.
+  * They measure events on the NorthBride which is shared
+  * by all cores on a package. NB events are counted on a
+  * shared set of counters. When a NB event is programmed
+  * in a counter, the data actually comes from a shared
+  * counter. Thus, access to those counters needs to be
+  * synchronized.
+  *
+  * We implement the synchronization such that no two cores
+  * can be measuring NB events using the same counters. Thus,
+  * we maintain a per-NB allocation table. The available slot
+  * is propagated using the event_constraint structure.
+  *
+  * We provide only one choice for each NB event based on
+  * the fact that only NB events have restrictions. Consequently,
+  * if a counter is available, there is a guarantee the NB event
+  * will be assigned to it. If no slot is available, an empty
+  * constraint is returned and scheduling will eventually fail
+  * for this event.
+  *
+  * Note that all cores attached the same NB compete for the same
+  * counters to host NB events, this is why we use atomic ops. Some
+  * multi-chip CPUs may have more than one NB.
+  *
+  * Given that resources are allocated (cmpxchg), they must be
+  * eventually freed for others to use. This is accomplished by
+  * calling amd_put_event_constraints().
+  *
+  * Non NB events are not impacted by this restriction.
+  */
+static struct event_constraint *
+amd_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct amd_nb *nb = cpuc->amd_nb;
+	struct perf_event *old = NULL;
+	int max = x86_pmu.num_counters;
+	int i, j, k = -1;
+
+	/*
+	 * if not NB event or no NB, then no constraints
+	 */
+	if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
+		return &unconstrained;
+
+	/*
+	 * detect if already present, if so reuse
+	 *
+	 * cannot merge with actual allocation
+	 * because of possible holes
+	 *
+	 * event can already be present yet not assigned (in hwc->idx)
+	 * because of successive calls to x86_schedule_events() from
+	 * hw_perf_group_sched_in() without hw_perf_enable()
+	 */
+	for (i = 0; i < max; i++) {
+		/*
+		 * keep track of first free slot
+		 */
+		if (k == -1 && !nb->owners[i])
+			k = i;
+
+		/* already present, reuse */
+		if (nb->owners[i] == event)
+			goto done;
+	}
+	/*
+	 * not present, so grab a new slot
+	 * starting either at:
+	 */
+	if (hwc->idx != -1) {
+		/* previous assignment */
+		i = hwc->idx;
+	} else if (k != -1) {
+		/* start from free slot found */
+		i = k;
+	} else {
+		/*
+		 * event not found, no slot found in
+		 * first pass, try again from the
+		 * beginning
+		 */
+		i = 0;
+	}
+	j = i;
+	do {
+		old = cmpxchg(nb->owners+i, NULL, event);
+		if (!old)
+			break;
+		if (++i == max)
+			i = 0;
+	} while (i != j);
+done:
+	if (!old)
+		return &nb->event_constraints[i];
+
+	return &emptyconstraint;
+}
+
+static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
+{
+	struct amd_nb *nb;
+	int i;
+
+	nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+	if (!nb)
+		return NULL;
+
+	memset(nb, 0, sizeof(*nb));
+	nb->nb_id = nb_id;
+
+	/*
+	 * initialize all possible NB constraints
+	 */
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		__set_bit(i, nb->event_constraints[i].idxmsk);
+		nb->event_constraints[i].weight = 1;
+	}
+	return nb;
+}
+
+static int amd_pmu_cpu_prepare(int cpu)
+{
+	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+
+	WARN_ON_ONCE(cpuc->amd_nb);
+
+	if (boot_cpu_data.x86_max_cores < 2)
+		return NOTIFY_OK;
+
+	cpuc->amd_nb = amd_alloc_nb(cpu, -1);
+	if (!cpuc->amd_nb)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static void amd_pmu_cpu_starting(int cpu)
+{
+	struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+	struct amd_nb *nb;
+	int i, nb_id;
+
+	if (boot_cpu_data.x86_max_cores < 2)
+		return;
+
+	nb_id = amd_get_nb_id(cpu);
+	WARN_ON_ONCE(nb_id == BAD_APICID);
+
+	raw_spin_lock(&amd_nb_lock);
+
+	for_each_online_cpu(i) {
+		nb = per_cpu(cpu_hw_events, i).amd_nb;
+		if (WARN_ON_ONCE(!nb))
+			continue;
+
+		if (nb->nb_id == nb_id) {
+			kfree(cpuc->amd_nb);
+			cpuc->amd_nb = nb;
+			break;
+		}
+	}
+
+	cpuc->amd_nb->nb_id = nb_id;
+	cpuc->amd_nb->refcnt++;
+
+	raw_spin_unlock(&amd_nb_lock);
+}
+
+static void amd_pmu_cpu_dead(int cpu)
+{
+	struct cpu_hw_events *cpuhw;
+
+	if (boot_cpu_data.x86_max_cores < 2)
+		return;
+
+	cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	raw_spin_lock(&amd_nb_lock);
+
+	if (cpuhw->amd_nb) {
+		struct amd_nb *nb = cpuhw->amd_nb;
+
+		if (nb->nb_id == -1 || --nb->refcnt == 0)
+			kfree(nb);
+
+		cpuhw->amd_nb = NULL;
+	}
+
+	raw_spin_unlock(&amd_nb_lock);
+}
+
+static __initconst const struct x86_pmu amd_pmu = {
+	.name			= "AMD",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= x86_pmu_enable_all,
+	.enable			= x86_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= amd_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_K7_EVNTSEL0,
+	.perfctr		= MSR_K7_PERFCTR0,
+	.event_map		= amd_pmu_event_map,
+	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
+	.num_counters		= 4,
+	.cntval_bits		= 48,
+	.cntval_mask		= (1ULL << 48) - 1,
+	.apic			= 1,
+	/* use highest bit to detect overflow */
+	.max_period		= (1ULL << 47) - 1,
+	.get_event_constraints	= amd_get_event_constraints,
+	.put_event_constraints	= amd_put_event_constraints,
+
+	.cpu_prepare		= amd_pmu_cpu_prepare,
+	.cpu_starting		= amd_pmu_cpu_starting,
+	.cpu_dead		= amd_pmu_cpu_dead,
+};
+
+static __init int amd_pmu_init(void)
+{
+	/* Performance-monitoring supported from K7 and later: */
+	if (boot_cpu_data.x86 < 6)
+		return -ENODEV;
+
+	x86_pmu = amd_pmu;
+
+	/* Events are common for all AMDs */
+	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
+	       sizeof(hw_cache_event_ids));
+
+	return 0;
+}
+
+#else /* CONFIG_CPU_SUP_AMD */
+
+static int amd_pmu_init(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
new file mode 100644
index 0000000..214ac86
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -0,0 +1,1008 @@
+#ifdef CONFIG_CPU_SUP_INTEL
+
+/*
+ * Intel PerfMon, used on Core and later.
+ */
+static const u64 intel_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x412e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
+};
+
+static struct event_constraint intel_core_event_constraints[] =
+{
+	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
+	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
+	INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */
+	INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */
+	INTEL_EVENT_CONSTRAINT(0x19, 0x2), /* DELAYED_BYPASS */
+	INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FP_COMP_INSTR_RET */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint intel_core2_event_constraints[] =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/*
+	 * Core2 has Fixed Counter 2 listed as CPU_CLK_UNHALTED.REF and event
+	 * 0x013c as CPU_CLK_UNHALTED.BUS and specifies there is a fixed
+	 * ratio between these counters.
+	 */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2),  CPU_CLK_UNHALTED.REF */
+	INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
+	INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
+	INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
+	INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */
+	INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */
+	INTEL_EVENT_CONSTRAINT(0x18, 0x1), /* IDLE_DURING_DIV */
+	INTEL_EVENT_CONSTRAINT(0x19, 0x2), /* DELAYED_BYPASS */
+	INTEL_EVENT_CONSTRAINT(0xa1, 0x1), /* RS_UOPS_DISPATCH_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xc9, 0x1), /* ITLB_MISS_RETIRED (T30-9) */
+	INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint intel_nehalem_event_constraints[] =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	INTEL_EVENT_CONSTRAINT(0x40, 0x3), /* L1D_CACHE_LD */
+	INTEL_EVENT_CONSTRAINT(0x41, 0x3), /* L1D_CACHE_ST */
+	INTEL_EVENT_CONSTRAINT(0x42, 0x3), /* L1D_CACHE_LOCK */
+	INTEL_EVENT_CONSTRAINT(0x43, 0x3), /* L1D_ALL_REF */
+	INTEL_EVENT_CONSTRAINT(0x48, 0x3), /* L1D_PEND_MISS */
+	INTEL_EVENT_CONSTRAINT(0x4e, 0x3), /* L1D_PREFETCH */
+	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
+	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint intel_westmere_event_constraints[] =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	INTEL_EVENT_CONSTRAINT(0x51, 0x3), /* L1D */
+	INTEL_EVENT_CONSTRAINT(0x60, 0x1), /* OFFCORE_REQUESTS_OUTSTANDING */
+	INTEL_EVENT_CONSTRAINT(0x63, 0x3), /* CACHE_LOCK_CYCLES */
+	INTEL_EVENT_CONSTRAINT(0xb3, 0x1), /* SNOOPQ_REQUEST_OUTSTANDING */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint intel_gen_event_constraints[] =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	/* FIXED_EVENT_CONSTRAINT(0x013c, 2), CPU_CLK_UNHALTED.REF */
+	EVENT_CONSTRAINT_END
+};
+
+static u64 intel_pmu_event_map(int hw_event)
+{
+	return intel_perfmon_event_map[hw_event];
+}
+
+static __initconst const u64 westmere_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS       */
+		[ C(RESULT_MISS)   ] = 0x0151, /* L1D.REPL                     */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES      */
+		[ C(RESULT_MISS)   ] = 0x0251, /* L1D.M_REPL                   */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
+		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
+		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
+		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
+		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS       */
+		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES      */
+		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
+		[ C(RESULT_MISS)   ] = 0x0185, /* ITLB_MISSES.ANY              */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static __initconst const u64 nehalem_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
+		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
+		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
+		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
+		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
+		[ C(RESULT_MISS)   ] = 0x20c8, /* ITLB_MISS_RETIRED            */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static __initconst const u64 core2_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE       */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE       */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x104e, /* L1D_PREFETCH.REQUESTS      */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0208, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0808, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x1282, /* ITLBMISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static __initconst const u64 atom_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE.LD               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE.ST               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0508, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0608, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES                */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static void intel_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+		intel_pmu_disable_bts();
+
+	intel_pmu_pebs_disable_all();
+	intel_pmu_lbr_disable_all();
+}
+
+static void intel_pmu_enable_all(int added)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	intel_pmu_pebs_enable_all();
+	intel_pmu_lbr_enable_all();
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+		struct perf_event *event =
+			cpuc->events[X86_PMC_IDX_FIXED_BTS];
+
+		if (WARN_ON_ONCE(!event))
+			return;
+
+		intel_pmu_enable_bts(event->hw.config);
+	}
+}
+
+/*
+ * Workaround for:
+ *   Intel Errata AAK100 (model 26)
+ *   Intel Errata AAP53  (model 30)
+ *   Intel Errata BD53   (model 44)
+ *
+ * These chips need to be 'reset' when adding counters by programming
+ * the magic three (non counting) events 0x4300D2, 0x4300B1 and 0x4300B5
+ * either in sequence on the same PMC or on different PMCs.
+ */
+static void intel_pmu_nhm_enable_all(int added)
+{
+	if (added) {
+		struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+		int i;
+
+		wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + 0, 0x4300D2);
+		wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + 1, 0x4300B1);
+		wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + 2, 0x4300B5);
+
+		wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0x3);
+		wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0x0);
+
+		for (i = 0; i < 3; i++) {
+			struct perf_event *event = cpuc->events[i];
+
+			if (!event)
+				continue;
+
+			__x86_pmu_enable_event(&event->hw,
+					       ARCH_PERFMON_EVENTSEL_ENABLE);
+		}
+	}
+	intel_pmu_enable_all(added);
+}
+
+static inline u64 intel_pmu_get_status(void)
+{
+	u64 status;
+
+	rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+
+	return status;
+}
+
+static inline void intel_pmu_ack_status(u64 ack)
+{
+	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
+}
+
+static void intel_pmu_disable_fixed(struct hw_perf_event *hwc)
+{
+	int idx = hwc->idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, mask;
+
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static void intel_pmu_disable_event(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
+		intel_pmu_disable_bts();
+		intel_pmu_drain_bts_buffer();
+		return;
+	}
+
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_disable_fixed(hwc);
+		return;
+	}
+
+	x86_pmu_disable_event(event);
+
+	if (unlikely(event->attr.precise_ip))
+		intel_pmu_pebs_disable(event);
+}
+
+static void intel_pmu_enable_fixed(struct hw_perf_event *hwc)
+{
+	int idx = hwc->idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, bits, mask;
+
+	/*
+	 * Enable IRQ generation (0x8),
+	 * and enable ring-3 counting (0x2) and ring-0 counting (0x1)
+	 * if requested:
+	 */
+	bits = 0x8ULL;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_USR)
+		bits |= 0x2;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+		bits |= 0x1;
+
+	/*
+	 * ANY bit is supported in v3 and up
+	 */
+	if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY)
+		bits |= 0x4;
+
+	bits <<= (idx * 4);
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	ctrl_val |= bits;
+	wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static void intel_pmu_enable_event(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
+		if (!__get_cpu_var(cpu_hw_events).enabled)
+			return;
+
+		intel_pmu_enable_bts(hwc->config);
+		return;
+	}
+
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_enable_fixed(hwc);
+		return;
+	}
+
+	if (unlikely(event->attr.precise_ip))
+		intel_pmu_pebs_enable(event);
+
+	__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
+}
+
+/*
+ * Save and restart an expired event. Called by NMI contexts,
+ * so it has to be careful about preempting normal event ops:
+ */
+static int intel_pmu_save_and_restart(struct perf_event *event)
+{
+	x86_perf_event_update(event);
+	return x86_perf_event_set_period(event);
+}
+
+static void intel_pmu_reset(void)
+{
+	struct debug_store *ds = __get_cpu_var(cpu_hw_events).ds;
+	unsigned long flags;
+	int idx;
+
+	if (!x86_pmu.num_counters)
+		return;
+
+	local_irq_save(flags);
+
+	printk("clearing PMU state on CPU#%d\n", smp_processor_id());
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		checking_wrmsrl(x86_pmu.eventsel + idx, 0ull);
+		checking_wrmsrl(x86_pmu.perfctr  + idx, 0ull);
+	}
+	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++)
+		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
+
+	if (ds)
+		ds->bts_index = ds->bts_buffer_base;
+
+	local_irq_restore(flags);
+}
+
+/*
+ * This handler is triggered by the local APIC, so the APIC IRQ handling
+ * rules apply:
+ */
+static int intel_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	int bit, loops;
+	u64 ack, status;
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	intel_pmu_disable_all();
+	intel_pmu_drain_bts_buffer();
+	status = intel_pmu_get_status();
+	if (!status) {
+		intel_pmu_enable_all(0);
+		return 0;
+	}
+
+	loops = 0;
+again:
+	if (++loops > 100) {
+		WARN_ONCE(1, "perfevents: irq loop stuck!\n");
+		perf_event_print_debug();
+		intel_pmu_reset();
+		goto done;
+	}
+
+	inc_irq_stat(apic_perf_irqs);
+	ack = status;
+
+	intel_pmu_lbr_read();
+
+	/*
+	 * PEBS overflow sets bit 62 in the global status register
+	 */
+	if (__test_and_clear_bit(62, (unsigned long *)&status))
+		x86_pmu.drain_pebs(regs);
+
+	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+		struct perf_event *event = cpuc->events[bit];
+
+		if (!test_bit(bit, cpuc->active_mask))
+			continue;
+
+		if (!intel_pmu_save_and_restart(event))
+			continue;
+
+		data.period = event->hw.last_period;
+
+		if (perf_event_overflow(event, 1, &data, regs))
+			x86_pmu_stop(event);
+	}
+
+	intel_pmu_ack_status(ack);
+
+	/*
+	 * Repeat if there is more work to be done:
+	 */
+	status = intel_pmu_get_status();
+	if (status)
+		goto again;
+
+done:
+	intel_pmu_enable_all(0);
+	return 1;
+}
+
+static struct event_constraint *
+intel_bts_constraints(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned int hw_event, bts_event;
+
+	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
+	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
+
+	if (unlikely(hw_event == bts_event && hwc->sample_period == 1))
+		return &bts_constraint;
+
+	return NULL;
+}
+
+static struct event_constraint *
+intel_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event)
+{
+	struct event_constraint *c;
+
+	c = intel_bts_constraints(event);
+	if (c)
+		return c;
+
+	c = intel_pebs_constraints(event);
+	if (c)
+		return c;
+
+	return x86_get_event_constraints(cpuc, event);
+}
+
+static int intel_pmu_hw_config(struct perf_event *event)
+{
+	int ret = x86_pmu_hw_config(event);
+
+	if (ret)
+		return ret;
+
+	if (event->attr.type != PERF_TYPE_RAW)
+		return 0;
+
+	if (!(event->attr.config & ARCH_PERFMON_EVENTSEL_ANY))
+		return 0;
+
+	if (x86_pmu.version < 3)
+		return -EINVAL;
+
+	if (perf_paranoid_cpu() && !capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	event->hw.config |= ARCH_PERFMON_EVENTSEL_ANY;
+
+	return 0;
+}
+
+static __initconst const struct x86_pmu core_pmu = {
+	.name			= "core",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= x86_pmu_disable_all,
+	.enable_all		= x86_pmu_enable_all,
+	.enable			= x86_pmu_enable_event,
+	.disable		= x86_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32 bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL << 31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+	.event_constraints	= intel_core_event_constraints,
+};
+
+static void intel_pmu_cpu_starting(int cpu)
+{
+	init_debug_store_on_cpu(cpu);
+	/*
+	 * Deal with CPUs that don't clear their LBRs on power-up.
+	 */
+	intel_pmu_lbr_reset();
+}
+
+static void intel_pmu_cpu_dying(int cpu)
+{
+	fini_debug_store_on_cpu(cpu);
+}
+
+static __initconst const struct x86_pmu intel_pmu = {
+	.name			= "Intel",
+	.handle_irq		= intel_pmu_handle_irq,
+	.disable_all		= intel_pmu_disable_all,
+	.enable_all		= intel_pmu_enable_all,
+	.enable			= intel_pmu_enable_event,
+	.disable		= intel_pmu_disable_event,
+	.hw_config		= intel_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32 bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL << 31) - 1,
+	.get_event_constraints	= intel_get_event_constraints,
+
+	.cpu_starting		= intel_pmu_cpu_starting,
+	.cpu_dying		= intel_pmu_cpu_dying,
+};
+
+static void intel_clovertown_quirks(void)
+{
+	/*
+	 * PEBS is unreliable due to:
+	 *
+	 *   AJ67  - PEBS may experience CPL leaks
+	 *   AJ68  - PEBS PMI may be delayed by one event
+	 *   AJ69  - GLOBAL_STATUS[62] will only be set when DEBUGCTL[12]
+	 *   AJ106 - FREEZE_LBRS_ON_PMI doesn't work in combination with PEBS
+	 *
+	 * AJ67 could be worked around by restricting the OS/USR flags.
+	 * AJ69 could be worked around by setting PMU_FREEZE_ON_PMI.
+	 *
+	 * AJ106 could possibly be worked around by not allowing LBR
+	 *       usage from PEBS, including the fixup.
+	 * AJ68  could possibly be worked around by always programming
+	 * 	 a pebs_event_reset[0] value and coping with the lost events.
+	 *
+	 * But taken together it might just make sense to not enable PEBS on
+	 * these chips.
+	 */
+	printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+	x86_pmu.pebs = 0;
+	x86_pmu.pebs_constraints = NULL;
+}
+
+static __init int intel_pmu_init(void)
+{
+	union cpuid10_edx edx;
+	union cpuid10_eax eax;
+	unsigned int unused;
+	unsigned int ebx;
+	int version;
+
+	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+		switch (boot_cpu_data.x86) {
+		case 0x6:
+			return p6_pmu_init();
+		case 0xf:
+			return p4_pmu_init();
+		}
+		return -ENODEV;
+	}
+
+	/*
+	 * Check whether the Architectural PerfMon supports
+	 * Branch Misses Retired hw_event or not.
+	 */
+	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
+	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+		return -ENODEV;
+
+	version = eax.split.version_id;
+	if (version < 2)
+		x86_pmu = core_pmu;
+	else
+		x86_pmu = intel_pmu;
+
+	x86_pmu.version			= version;
+	x86_pmu.num_counters		= eax.split.num_counters;
+	x86_pmu.cntval_bits		= eax.split.bit_width;
+	x86_pmu.cntval_mask		= (1ULL << eax.split.bit_width) - 1;
+
+	/*
+	 * Quirk: v2 perfmon does not report fixed-purpose events, so
+	 * assume at least 3 events:
+	 */
+	if (version > 1)
+		x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
+
+	/*
+	 * v2 and above have a perf capabilities MSR
+	 */
+	if (version > 1) {
+		u64 capabilities;
+
+		rdmsrl(MSR_IA32_PERF_CAPABILITIES, capabilities);
+		x86_pmu.intel_cap.capabilities = capabilities;
+	}
+
+	intel_ds_init();
+
+	/*
+	 * Install the hw-cache-events table:
+	 */
+	switch (boot_cpu_data.x86_model) {
+	case 14: /* 65 nm core solo/duo, "Yonah" */
+		pr_cont("Core events, ");
+		break;
+
+	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
+		x86_pmu.quirks = intel_clovertown_quirks;
+	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
+	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
+	case 29: /* six-core 45 nm xeon "Dunnington" */
+		memcpy(hw_cache_event_ids, core2_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		intel_pmu_lbr_init_core();
+
+		x86_pmu.event_constraints = intel_core2_event_constraints;
+		pr_cont("Core2 events, ");
+		break;
+
+	case 26: /* 45 nm nehalem, "Bloomfield" */
+	case 30: /* 45 nm nehalem, "Lynnfield" */
+	case 46: /* 45 nm nehalem-ex, "Beckton" */
+		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		intel_pmu_lbr_init_nhm();
+
+		x86_pmu.event_constraints = intel_nehalem_event_constraints;
+		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
+		pr_cont("Nehalem events, ");
+		break;
+
+	case 28: /* Atom */
+		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		intel_pmu_lbr_init_atom();
+
+		x86_pmu.event_constraints = intel_gen_event_constraints;
+		pr_cont("Atom events, ");
+		break;
+
+	case 37: /* 32 nm nehalem, "Clarkdale" */
+	case 44: /* 32 nm nehalem, "Gulftown" */
+		memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		intel_pmu_lbr_init_nhm();
+
+		x86_pmu.event_constraints = intel_westmere_event_constraints;
+		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
+		pr_cont("Westmere events, ");
+		break;
+
+	default:
+		/*
+		 * default constraints for v2 and up
+		 */
+		x86_pmu.event_constraints = intel_gen_event_constraints;
+		pr_cont("generic architected perfmon, ");
+	}
+	return 0;
+}
+
+#else /* CONFIG_CPU_SUP_INTEL */
+
+static int intel_pmu_init(void)
+{
+	return 0;
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
new file mode 100644
index 0000000..18018d1
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -0,0 +1,641 @@
+#ifdef CONFIG_CPU_SUP_INTEL
+
+/* The maximal number of PEBS events: */
+#define MAX_PEBS_EVENTS		4
+
+/* The size of a BTS record in bytes: */
+#define BTS_RECORD_SIZE		24
+
+#define BTS_BUFFER_SIZE		(PAGE_SIZE << 4)
+#define PEBS_BUFFER_SIZE	PAGE_SIZE
+
+/*
+ * pebs_record_32 for p4 and core not supported
+
+struct pebs_record_32 {
+	u32 flags, ip;
+	u32 ax, bc, cx, dx;
+	u32 si, di, bp, sp;
+};
+
+ */
+
+struct pebs_record_core {
+	u64 flags, ip;
+	u64 ax, bx, cx, dx;
+	u64 si, di, bp, sp;
+	u64 r8,  r9,  r10, r11;
+	u64 r12, r13, r14, r15;
+};
+
+struct pebs_record_nhm {
+	u64 flags, ip;
+	u64 ax, bx, cx, dx;
+	u64 si, di, bp, sp;
+	u64 r8,  r9,  r10, r11;
+	u64 r12, r13, r14, r15;
+	u64 status, dla, dse, lat;
+};
+
+/*
+ * A debug store configuration.
+ *
+ * We only support architectures that use 64bit fields.
+ */
+struct debug_store {
+	u64	bts_buffer_base;
+	u64	bts_index;
+	u64	bts_absolute_maximum;
+	u64	bts_interrupt_threshold;
+	u64	pebs_buffer_base;
+	u64	pebs_index;
+	u64	pebs_absolute_maximum;
+	u64	pebs_interrupt_threshold;
+	u64	pebs_event_reset[MAX_PEBS_EVENTS];
+};
+
+static void init_debug_store_on_cpu(int cpu)
+{
+	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
+
+	if (!ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
+		     (u32)((u64)(unsigned long)ds),
+		     (u32)((u64)(unsigned long)ds >> 32));
+}
+
+static void fini_debug_store_on_cpu(int cpu)
+{
+	if (!per_cpu(cpu_hw_events, cpu).ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
+}
+
+static void release_ds_buffers(void)
+{
+	int cpu;
+
+	if (!x86_pmu.bts && !x86_pmu.pebs)
+		return;
+
+	get_online_cpus();
+
+	for_each_online_cpu(cpu)
+		fini_debug_store_on_cpu(cpu);
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
+
+		if (!ds)
+			continue;
+
+		per_cpu(cpu_hw_events, cpu).ds = NULL;
+
+		kfree((void *)(unsigned long)ds->pebs_buffer_base);
+		kfree((void *)(unsigned long)ds->bts_buffer_base);
+		kfree(ds);
+	}
+
+	put_online_cpus();
+}
+
+static int reserve_ds_buffers(void)
+{
+	int cpu, err = 0;
+
+	if (!x86_pmu.bts && !x86_pmu.pebs)
+		return 0;
+
+	get_online_cpus();
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds;
+		void *buffer;
+		int max, thresh;
+
+		err = -ENOMEM;
+		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+		if (unlikely(!ds))
+			break;
+		per_cpu(cpu_hw_events, cpu).ds = ds;
+
+		if (x86_pmu.bts) {
+			buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
+			if (unlikely(!buffer))
+				break;
+
+			max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE;
+			thresh = max / 16;
+
+			ds->bts_buffer_base = (u64)(unsigned long)buffer;
+			ds->bts_index = ds->bts_buffer_base;
+			ds->bts_absolute_maximum = ds->bts_buffer_base +
+				max * BTS_RECORD_SIZE;
+			ds->bts_interrupt_threshold = ds->bts_absolute_maximum -
+				thresh * BTS_RECORD_SIZE;
+		}
+
+		if (x86_pmu.pebs) {
+			buffer = kzalloc(PEBS_BUFFER_SIZE, GFP_KERNEL);
+			if (unlikely(!buffer))
+				break;
+
+			max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
+
+			ds->pebs_buffer_base = (u64)(unsigned long)buffer;
+			ds->pebs_index = ds->pebs_buffer_base;
+			ds->pebs_absolute_maximum = ds->pebs_buffer_base +
+				max * x86_pmu.pebs_record_size;
+			/*
+			 * Always use single record PEBS
+			 */
+			ds->pebs_interrupt_threshold = ds->pebs_buffer_base +
+				x86_pmu.pebs_record_size;
+		}
+
+		err = 0;
+	}
+
+	if (err)
+		release_ds_buffers();
+	else {
+		for_each_online_cpu(cpu)
+			init_debug_store_on_cpu(cpu);
+	}
+
+	put_online_cpus();
+
+	return err;
+}
+
+/*
+ * BTS
+ */
+
+static struct event_constraint bts_constraint =
+	EVENT_CONSTRAINT(0, 1ULL << X86_PMC_IDX_FIXED_BTS, 0);
+
+static void intel_pmu_enable_bts(u64 config)
+{
+	unsigned long debugctlmsr;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr |= DEBUGCTLMSR_TR;
+	debugctlmsr |= DEBUGCTLMSR_BTS;
+	debugctlmsr |= DEBUGCTLMSR_BTINT;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
+		debugctlmsr |= DEBUGCTLMSR_BTS_OFF_OS;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
+		debugctlmsr |= DEBUGCTLMSR_BTS_OFF_USR;
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_disable_bts(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	unsigned long debugctlmsr;
+
+	if (!cpuc->ds)
+		return;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr &=
+		~(DEBUGCTLMSR_TR | DEBUGCTLMSR_BTS | DEBUGCTLMSR_BTINT |
+		  DEBUGCTLMSR_BTS_OFF_OS | DEBUGCTLMSR_BTS_OFF_USR);
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_drain_bts_buffer(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct debug_store *ds = cpuc->ds;
+	struct bts_record {
+		u64	from;
+		u64	to;
+		u64	flags;
+	};
+	struct perf_event *event = cpuc->events[X86_PMC_IDX_FIXED_BTS];
+	struct bts_record *at, *top;
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+	struct perf_sample_data data;
+	struct pt_regs regs;
+
+	if (!event)
+		return;
+
+	if (!ds)
+		return;
+
+	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
+	top = (struct bts_record *)(unsigned long)ds->bts_index;
+
+	if (top <= at)
+		return;
+
+	ds->bts_index = ds->bts_buffer_base;
+
+	perf_sample_data_init(&data, 0);
+	data.period = event->hw.last_period;
+	regs.ip     = 0;
+
+	/*
+	 * Prepare a generic sample, i.e. fill in the invariant fields.
+	 * We will overwrite the from and to address before we output
+	 * the sample.
+	 */
+	perf_prepare_sample(&header, &data, event, &regs);
+
+	if (perf_output_begin(&handle, event, header.size * (top - at), 1, 1))
+		return;
+
+	for (; at < top; at++) {
+		data.ip		= at->from;
+		data.addr	= at->to;
+
+		perf_output_sample(&handle, &header, &data, event);
+	}
+
+	perf_output_end(&handle);
+
+	/* There's new data available. */
+	event->hw.interrupts++;
+	event->pending_kill = POLL_IN;
+}
+
+/*
+ * PEBS
+ */
+
+static struct event_constraint intel_core_pebs_events[] = {
+	PEBS_EVENT_CONSTRAINT(0x00c0, 0x1), /* INSTR_RETIRED.ANY */
+	PEBS_EVENT_CONSTRAINT(0xfec1, 0x1), /* X87_OPS_RETIRED.ANY */
+	PEBS_EVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_RETIRED.MISPRED */
+	PEBS_EVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
+	PEBS_EVENT_CONSTRAINT(0x01cb, 0x1), /* MEM_LOAD_RETIRED.L1D_MISS */
+	PEBS_EVENT_CONSTRAINT(0x02cb, 0x1), /* MEM_LOAD_RETIRED.L1D_LINE_MISS */
+	PEBS_EVENT_CONSTRAINT(0x04cb, 0x1), /* MEM_LOAD_RETIRED.L2_MISS */
+	PEBS_EVENT_CONSTRAINT(0x08cb, 0x1), /* MEM_LOAD_RETIRED.L2_LINE_MISS */
+	PEBS_EVENT_CONSTRAINT(0x10cb, 0x1), /* MEM_LOAD_RETIRED.DTLB_MISS */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint intel_nehalem_pebs_events[] = {
+	PEBS_EVENT_CONSTRAINT(0x00c0, 0xf), /* INSTR_RETIRED.ANY */
+	PEBS_EVENT_CONSTRAINT(0xfec1, 0xf), /* X87_OPS_RETIRED.ANY */
+	PEBS_EVENT_CONSTRAINT(0x00c5, 0xf), /* BR_INST_RETIRED.MISPRED */
+	PEBS_EVENT_CONSTRAINT(0x1fc7, 0xf), /* SIMD_INST_RETURED.ANY */
+	PEBS_EVENT_CONSTRAINT(0x01cb, 0xf), /* MEM_LOAD_RETIRED.L1D_MISS */
+	PEBS_EVENT_CONSTRAINT(0x02cb, 0xf), /* MEM_LOAD_RETIRED.L1D_LINE_MISS */
+	PEBS_EVENT_CONSTRAINT(0x04cb, 0xf), /* MEM_LOAD_RETIRED.L2_MISS */
+	PEBS_EVENT_CONSTRAINT(0x08cb, 0xf), /* MEM_LOAD_RETIRED.L2_LINE_MISS */
+	PEBS_EVENT_CONSTRAINT(0x10cb, 0xf), /* MEM_LOAD_RETIRED.DTLB_MISS */
+	EVENT_CONSTRAINT_END
+};
+
+static struct event_constraint *
+intel_pebs_constraints(struct perf_event *event)
+{
+	struct event_constraint *c;
+
+	if (!event->attr.precise_ip)
+		return NULL;
+
+	if (x86_pmu.pebs_constraints) {
+		for_each_event_constraint(c, x86_pmu.pebs_constraints) {
+			if ((event->hw.config & c->cmask) == c->code)
+				return c;
+		}
+	}
+
+	return &emptyconstraint;
+}
+
+static void intel_pmu_pebs_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+
+	hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT;
+
+	cpuc->pebs_enabled |= 1ULL << hwc->idx;
+	WARN_ON_ONCE(cpuc->enabled);
+
+	if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1)
+		intel_pmu_lbr_enable(event);
+}
+
+static void intel_pmu_pebs_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+
+	cpuc->pebs_enabled &= ~(1ULL << hwc->idx);
+	if (cpuc->enabled)
+		wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
+
+	hwc->config |= ARCH_PERFMON_EVENTSEL_INT;
+
+	if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1)
+		intel_pmu_lbr_disable(event);
+}
+
+static void intel_pmu_pebs_enable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->pebs_enabled)
+		wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
+}
+
+static void intel_pmu_pebs_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->pebs_enabled)
+		wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
+}
+
+#include <asm/insn.h>
+
+static inline bool kernel_ip(unsigned long ip)
+{
+#ifdef CONFIG_X86_32
+	return ip > PAGE_OFFSET;
+#else
+	return (long)ip < 0;
+#endif
+}
+
+static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	unsigned long from = cpuc->lbr_entries[0].from;
+	unsigned long old_to, to = cpuc->lbr_entries[0].to;
+	unsigned long ip = regs->ip;
+
+	/*
+	 * We don't need to fixup if the PEBS assist is fault like
+	 */
+	if (!x86_pmu.intel_cap.pebs_trap)
+		return 1;
+
+	/*
+	 * No LBR entry, no basic block, no rewinding
+	 */
+	if (!cpuc->lbr_stack.nr || !from || !to)
+		return 0;
+
+	/*
+	 * Basic blocks should never cross user/kernel boundaries
+	 */
+	if (kernel_ip(ip) != kernel_ip(to))
+		return 0;
+
+	/*
+	 * unsigned math, either ip is before the start (impossible) or
+	 * the basic block is larger than 1 page (sanity)
+	 */
+	if ((ip - to) > PAGE_SIZE)
+		return 0;
+
+	/*
+	 * We sampled a branch insn, rewind using the LBR stack
+	 */
+	if (ip == to) {
+		regs->ip = from;
+		return 1;
+	}
+
+	do {
+		struct insn insn;
+		u8 buf[MAX_INSN_SIZE];
+		void *kaddr;
+
+		old_to = to;
+		if (!kernel_ip(ip)) {
+			int bytes, size = MAX_INSN_SIZE;
+
+			bytes = copy_from_user_nmi(buf, (void __user *)to, size);
+			if (bytes != size)
+				return 0;
+
+			kaddr = buf;
+		} else
+			kaddr = (void *)to;
+
+		kernel_insn_init(&insn, kaddr);
+		insn_get_length(&insn);
+		to += insn.length;
+	} while (to < ip);
+
+	if (to == ip) {
+		regs->ip = old_to;
+		return 1;
+	}
+
+	/*
+	 * Even though we decoded the basic block, the instruction stream
+	 * never matched the given IP, either the TO or the IP got corrupted.
+	 */
+	return 0;
+}
+
+static int intel_pmu_save_and_restart(struct perf_event *event);
+
+static void __intel_pmu_pebs_event(struct perf_event *event,
+				   struct pt_regs *iregs, void *__pebs)
+{
+	/*
+	 * We cast to pebs_record_core since that is a subset of
+	 * both formats and we don't use the other fields in this
+	 * routine.
+	 */
+	struct pebs_record_core *pebs = __pebs;
+	struct perf_sample_data data;
+	struct pt_regs regs;
+
+	if (!intel_pmu_save_and_restart(event))
+		return;
+
+	perf_sample_data_init(&data, 0);
+	data.period = event->hw.last_period;
+
+	/*
+	 * We use the interrupt regs as a base because the PEBS record
+	 * does not contain a full regs set, specifically it seems to
+	 * lack segment descriptors, which get used by things like
+	 * user_mode().
+	 *
+	 * In the simple case fix up only the IP and BP,SP regs, for
+	 * PERF_SAMPLE_IP and PERF_SAMPLE_CALLCHAIN to function properly.
+	 * A possible PERF_SAMPLE_REGS will have to transfer all regs.
+	 */
+	regs = *iregs;
+	regs.ip = pebs->ip;
+	regs.bp = pebs->bp;
+	regs.sp = pebs->sp;
+
+	if (event->attr.precise_ip > 1 && intel_pmu_pebs_fixup_ip(&regs))
+		regs.flags |= PERF_EFLAGS_EXACT;
+	else
+		regs.flags &= ~PERF_EFLAGS_EXACT;
+
+	if (perf_event_overflow(event, 1, &data, &regs))
+		x86_pmu_stop(event);
+}
+
+static void intel_pmu_drain_pebs_core(struct pt_regs *iregs)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct debug_store *ds = cpuc->ds;
+	struct perf_event *event = cpuc->events[0]; /* PMC0 only */
+	struct pebs_record_core *at, *top;
+	int n;
+
+	if (!ds || !x86_pmu.pebs)
+		return;
+
+	at  = (struct pebs_record_core *)(unsigned long)ds->pebs_buffer_base;
+	top = (struct pebs_record_core *)(unsigned long)ds->pebs_index;
+
+	/*
+	 * Whatever else happens, drain the thing
+	 */
+	ds->pebs_index = ds->pebs_buffer_base;
+
+	if (!test_bit(0, cpuc->active_mask))
+		return;
+
+	WARN_ON_ONCE(!event);
+
+	if (!event->attr.precise_ip)
+		return;
+
+	n = top - at;
+	if (n <= 0)
+		return;
+
+	/*
+	 * Should not happen, we program the threshold at 1 and do not
+	 * set a reset value.
+	 */
+	WARN_ON_ONCE(n > 1);
+	at += n - 1;
+
+	__intel_pmu_pebs_event(event, iregs, at);
+}
+
+static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct debug_store *ds = cpuc->ds;
+	struct pebs_record_nhm *at, *top;
+	struct perf_event *event = NULL;
+	u64 status = 0;
+	int bit, n;
+
+	if (!ds || !x86_pmu.pebs)
+		return;
+
+	at  = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
+	top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
+
+	ds->pebs_index = ds->pebs_buffer_base;
+
+	n = top - at;
+	if (n <= 0)
+		return;
+
+	/*
+	 * Should not happen, we program the threshold at 1 and do not
+	 * set a reset value.
+	 */
+	WARN_ON_ONCE(n > MAX_PEBS_EVENTS);
+
+	for ( ; at < top; at++) {
+		for_each_set_bit(bit, (unsigned long *)&at->status, MAX_PEBS_EVENTS) {
+			event = cpuc->events[bit];
+			if (!test_bit(bit, cpuc->active_mask))
+				continue;
+
+			WARN_ON_ONCE(!event);
+
+			if (!event->attr.precise_ip)
+				continue;
+
+			if (__test_and_set_bit(bit, (unsigned long *)&status))
+				continue;
+
+			break;
+		}
+
+		if (!event || bit >= MAX_PEBS_EVENTS)
+			continue;
+
+		__intel_pmu_pebs_event(event, iregs, at);
+	}
+}
+
+/*
+ * BTS, PEBS probe and setup
+ */
+
+static void intel_ds_init(void)
+{
+	/*
+	 * No support for 32bit formats
+	 */
+	if (!boot_cpu_has(X86_FEATURE_DTES64))
+		return;
+
+	x86_pmu.bts  = boot_cpu_has(X86_FEATURE_BTS);
+	x86_pmu.pebs = boot_cpu_has(X86_FEATURE_PEBS);
+	if (x86_pmu.pebs) {
+		char pebs_type = x86_pmu.intel_cap.pebs_trap ?  '+' : '-';
+		int format = x86_pmu.intel_cap.pebs_format;
+
+		switch (format) {
+		case 0:
+			printk(KERN_CONT "PEBS fmt0%c, ", pebs_type);
+			x86_pmu.pebs_record_size = sizeof(struct pebs_record_core);
+			x86_pmu.drain_pebs = intel_pmu_drain_pebs_core;
+			x86_pmu.pebs_constraints = intel_core_pebs_events;
+			break;
+
+		case 1:
+			printk(KERN_CONT "PEBS fmt1%c, ", pebs_type);
+			x86_pmu.pebs_record_size = sizeof(struct pebs_record_nhm);
+			x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
+			x86_pmu.pebs_constraints = intel_nehalem_pebs_events;
+			break;
+
+		default:
+			printk(KERN_CONT "no PEBS fmt%d%c, ", format, pebs_type);
+			x86_pmu.pebs = 0;
+			break;
+		}
+	}
+}
+
+#else /* CONFIG_CPU_SUP_INTEL */
+
+static int reserve_ds_buffers(void)
+{
+	return 0;
+}
+
+static void release_ds_buffers(void)
+{
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
new file mode 100644
index 0000000..d202c1b
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -0,0 +1,218 @@
+#ifdef CONFIG_CPU_SUP_INTEL
+
+enum {
+	LBR_FORMAT_32		= 0x00,
+	LBR_FORMAT_LIP		= 0x01,
+	LBR_FORMAT_EIP		= 0x02,
+	LBR_FORMAT_EIP_FLAGS	= 0x03,
+};
+
+/*
+ * We only support LBR implementations that have FREEZE_LBRS_ON_PMI
+ * otherwise it becomes near impossible to get a reliable stack.
+ */
+
+static void __intel_pmu_lbr_enable(void)
+{
+	u64 debugctl;
+
+	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+	debugctl |= (DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+}
+
+static void __intel_pmu_lbr_disable(void)
+{
+	u64 debugctl;
+
+	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+	debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+}
+
+static void intel_pmu_lbr_reset_32(void)
+{
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++)
+		wrmsrl(x86_pmu.lbr_from + i, 0);
+}
+
+static void intel_pmu_lbr_reset_64(void)
+{
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		wrmsrl(x86_pmu.lbr_from + i, 0);
+		wrmsrl(x86_pmu.lbr_to   + i, 0);
+	}
+}
+
+static void intel_pmu_lbr_reset(void)
+{
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
+		intel_pmu_lbr_reset_32();
+	else
+		intel_pmu_lbr_reset_64();
+}
+
+static void intel_pmu_lbr_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	WARN_ON_ONCE(cpuc->enabled);
+
+	/*
+	 * Reset the LBR stack if we changed task context to
+	 * avoid data leaks.
+	 */
+
+	if (event->ctx->task && cpuc->lbr_context != event->ctx) {
+		intel_pmu_lbr_reset();
+		cpuc->lbr_context = event->ctx;
+	}
+
+	cpuc->lbr_users++;
+}
+
+static void intel_pmu_lbr_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	cpuc->lbr_users--;
+	WARN_ON_ONCE(cpuc->lbr_users < 0);
+
+	if (cpuc->enabled && !cpuc->lbr_users)
+		__intel_pmu_lbr_disable();
+}
+
+static void intel_pmu_lbr_enable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->lbr_users)
+		__intel_pmu_lbr_enable();
+}
+
+static void intel_pmu_lbr_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->lbr_users)
+		__intel_pmu_lbr_disable();
+}
+
+static inline u64 intel_pmu_lbr_tos(void)
+{
+	u64 tos;
+
+	rdmsrl(x86_pmu.lbr_tos, tos);
+
+	return tos;
+}
+
+static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
+{
+	unsigned long mask = x86_pmu.lbr_nr - 1;
+	u64 tos = intel_pmu_lbr_tos();
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		unsigned long lbr_idx = (tos - i) & mask;
+		union {
+			struct {
+				u32 from;
+				u32 to;
+			};
+			u64     lbr;
+		} msr_lastbranch;
+
+		rdmsrl(x86_pmu.lbr_from + lbr_idx, msr_lastbranch.lbr);
+
+		cpuc->lbr_entries[i].from  = msr_lastbranch.from;
+		cpuc->lbr_entries[i].to    = msr_lastbranch.to;
+		cpuc->lbr_entries[i].flags = 0;
+	}
+	cpuc->lbr_stack.nr = i;
+}
+
+#define LBR_FROM_FLAG_MISPRED  (1ULL << 63)
+
+/*
+ * Due to lack of segmentation in Linux the effective address (offset)
+ * is the same as the linear address, allowing us to merge the LIP and EIP
+ * LBR formats.
+ */
+static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
+{
+	unsigned long mask = x86_pmu.lbr_nr - 1;
+	int lbr_format = x86_pmu.intel_cap.lbr_format;
+	u64 tos = intel_pmu_lbr_tos();
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		unsigned long lbr_idx = (tos - i) & mask;
+		u64 from, to, flags = 0;
+
+		rdmsrl(x86_pmu.lbr_from + lbr_idx, from);
+		rdmsrl(x86_pmu.lbr_to   + lbr_idx, to);
+
+		if (lbr_format == LBR_FORMAT_EIP_FLAGS) {
+			flags = !!(from & LBR_FROM_FLAG_MISPRED);
+			from = (u64)((((s64)from) << 1) >> 1);
+		}
+
+		cpuc->lbr_entries[i].from  = from;
+		cpuc->lbr_entries[i].to    = to;
+		cpuc->lbr_entries[i].flags = flags;
+	}
+	cpuc->lbr_stack.nr = i;
+}
+
+static void intel_pmu_lbr_read(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuc->lbr_users)
+		return;
+
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
+		intel_pmu_lbr_read_32(cpuc);
+	else
+		intel_pmu_lbr_read_64(cpuc);
+}
+
+static void intel_pmu_lbr_init_core(void)
+{
+	x86_pmu.lbr_nr     = 4;
+	x86_pmu.lbr_tos    = 0x01c9;
+	x86_pmu.lbr_from   = 0x40;
+	x86_pmu.lbr_to     = 0x60;
+}
+
+static void intel_pmu_lbr_init_nhm(void)
+{
+	x86_pmu.lbr_nr     = 16;
+	x86_pmu.lbr_tos    = 0x01c9;
+	x86_pmu.lbr_from   = 0x680;
+	x86_pmu.lbr_to     = 0x6c0;
+}
+
+static void intel_pmu_lbr_init_atom(void)
+{
+	x86_pmu.lbr_nr	   = 8;
+	x86_pmu.lbr_tos    = 0x01c9;
+	x86_pmu.lbr_from   = 0x40;
+	x86_pmu.lbr_to     = 0x60;
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
new file mode 100644
index 0000000..ae85d69
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -0,0 +1,858 @@
+/*
+ * Netburst Perfomance Events (P4, old Xeon)
+ *
+ *  Copyright (C) 2010 Parallels, Inc., Cyrill Gorcunov <gorcunov@openvz.org>
+ *  Copyright (C) 2010 Intel Corporation, Lin Ming <ming.m.lin@intel.com>
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#ifdef CONFIG_CPU_SUP_INTEL
+
+#include <asm/perf_event_p4.h>
+
+#define P4_CNTR_LIMIT 3
+/*
+ * array indices: 0,1 - HT threads, used with HT enabled cpu
+ */
+struct p4_event_bind {
+	unsigned int opcode;			/* Event code and ESCR selector */
+	unsigned int escr_msr[2];		/* ESCR MSR for this event */
+	char cntr[2][P4_CNTR_LIMIT];		/* counter index (offset), -1 on abscence */
+};
+
+struct p4_cache_event_bind {
+	unsigned int metric_pebs;
+	unsigned int metric_vert;
+};
+
+#define P4_GEN_CACHE_EVENT_BIND(name)		\
+	[P4_CACHE__##name] = {			\
+		.metric_pebs = P4_PEBS__##name,	\
+		.metric_vert = P4_VERT__##name,	\
+	}
+
+static struct p4_cache_event_bind p4_cache_event_bind_map[] = {
+	P4_GEN_CACHE_EVENT_BIND(1stl_cache_load_miss_retired),
+	P4_GEN_CACHE_EVENT_BIND(2ndl_cache_load_miss_retired),
+	P4_GEN_CACHE_EVENT_BIND(dtlb_load_miss_retired),
+	P4_GEN_CACHE_EVENT_BIND(dtlb_store_miss_retired),
+};
+
+/*
+ * Note that we don't use CCCR1 here, there is an
+ * exception for P4_BSQ_ALLOCATION but we just have
+ * no workaround
+ *
+ * consider this binding as resources which particular
+ * event may borrow, it doesn't contain EventMask,
+ * Tags and friends -- they are left to a caller
+ */
+static struct p4_event_bind p4_event_bind_map[] = {
+	[P4_EVENT_TC_DELIVER_MODE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_TC_DELIVER_MODE),
+		.escr_msr	= { MSR_P4_TC_ESCR0, MSR_P4_TC_ESCR1 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_BPU_FETCH_REQUEST] = {
+		.opcode		= P4_OPCODE(P4_EVENT_BPU_FETCH_REQUEST),
+		.escr_msr	= { MSR_P4_BPU_ESCR0, MSR_P4_BPU_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_ITLB_REFERENCE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_ITLB_REFERENCE),
+		.escr_msr	= { MSR_P4_ITLB_ESCR0, MSR_P4_ITLB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_MEMORY_CANCEL] = {
+		.opcode		= P4_OPCODE(P4_EVENT_MEMORY_CANCEL),
+		.escr_msr	= { MSR_P4_DAC_ESCR0, MSR_P4_DAC_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_MEMORY_COMPLETE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_MEMORY_COMPLETE),
+		.escr_msr	= { MSR_P4_SAAT_ESCR0 , MSR_P4_SAAT_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_LOAD_PORT_REPLAY] = {
+		.opcode		= P4_OPCODE(P4_EVENT_LOAD_PORT_REPLAY),
+		.escr_msr	= { MSR_P4_SAAT_ESCR0, MSR_P4_SAAT_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_STORE_PORT_REPLAY] = {
+		.opcode		= P4_OPCODE(P4_EVENT_STORE_PORT_REPLAY),
+		.escr_msr	= { MSR_P4_SAAT_ESCR0 ,  MSR_P4_SAAT_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_MOB_LOAD_REPLAY] = {
+		.opcode		= P4_OPCODE(P4_EVENT_MOB_LOAD_REPLAY),
+		.escr_msr	= { MSR_P4_MOB_ESCR0, MSR_P4_MOB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_PAGE_WALK_TYPE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_PAGE_WALK_TYPE),
+		.escr_msr	= { MSR_P4_PMH_ESCR0, MSR_P4_PMH_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_BSQ_CACHE_REFERENCE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_BSQ_CACHE_REFERENCE),
+		.escr_msr	= { MSR_P4_BSU_ESCR0, MSR_P4_BSU_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_IOQ_ALLOCATION] = {
+		.opcode		= P4_OPCODE(P4_EVENT_IOQ_ALLOCATION),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_IOQ_ACTIVE_ENTRIES] = {	/* shared ESCR */
+		.opcode		= P4_OPCODE(P4_EVENT_IOQ_ACTIVE_ENTRIES),
+		.escr_msr	= { MSR_P4_FSB_ESCR1,  MSR_P4_FSB_ESCR1 },
+		.cntr		= { {2, -1, -1}, {3, -1, -1} },
+	},
+	[P4_EVENT_FSB_DATA_ACTIVITY] = {
+		.opcode		= P4_OPCODE(P4_EVENT_FSB_DATA_ACTIVITY),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_BSQ_ALLOCATION] = {		/* shared ESCR, broken CCCR1 */
+		.opcode		= P4_OPCODE(P4_EVENT_BSQ_ALLOCATION),
+		.escr_msr	= { MSR_P4_BSU_ESCR0, MSR_P4_BSU_ESCR0 },
+		.cntr		= { {0, -1, -1}, {1, -1, -1} },
+	},
+	[P4_EVENT_BSQ_ACTIVE_ENTRIES] = {	/* shared ESCR */
+		.opcode		= P4_OPCODE(P4_EVENT_BSQ_ACTIVE_ENTRIES),
+		.escr_msr	= { MSR_P4_BSU_ESCR1 , MSR_P4_BSU_ESCR1 },
+		.cntr		= { {2, -1, -1}, {3, -1, -1} },
+	},
+	[P4_EVENT_SSE_INPUT_ASSIST] = {
+		.opcode		= P4_OPCODE(P4_EVENT_SSE_INPUT_ASSIST),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_PACKED_SP_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_PACKED_SP_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_PACKED_DP_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_PACKED_DP_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_SCALAR_SP_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_SCALAR_SP_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_SCALAR_DP_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_SCALAR_DP_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_64BIT_MMX_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_64BIT_MMX_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_128BIT_MMX_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_128BIT_MMX_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_X87_FP_UOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_X87_FP_UOP),
+		.escr_msr	= { MSR_P4_FIRM_ESCR0, MSR_P4_FIRM_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_TC_MISC] = {
+		.opcode		= P4_OPCODE(P4_EVENT_TC_MISC),
+		.escr_msr	= { MSR_P4_TC_ESCR0, MSR_P4_TC_ESCR1 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_GLOBAL_POWER_EVENTS] = {
+		.opcode		= P4_OPCODE(P4_EVENT_GLOBAL_POWER_EVENTS),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_TC_MS_XFER] = {
+		.opcode		= P4_OPCODE(P4_EVENT_TC_MS_XFER),
+		.escr_msr	= { MSR_P4_MS_ESCR0, MSR_P4_MS_ESCR1 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_UOP_QUEUE_WRITES] = {
+		.opcode		= P4_OPCODE(P4_EVENT_UOP_QUEUE_WRITES),
+		.escr_msr	= { MSR_P4_MS_ESCR0, MSR_P4_MS_ESCR1 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE),
+		.escr_msr	= { MSR_P4_TBPU_ESCR0 , MSR_P4_TBPU_ESCR0 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_RETIRED_BRANCH_TYPE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_RETIRED_BRANCH_TYPE),
+		.escr_msr	= { MSR_P4_TBPU_ESCR0 , MSR_P4_TBPU_ESCR1 },
+		.cntr		= { {4, 5, -1}, {6, 7, -1} },
+	},
+	[P4_EVENT_RESOURCE_STALL] = {
+		.opcode		= P4_OPCODE(P4_EVENT_RESOURCE_STALL),
+		.escr_msr	= { MSR_P4_ALF_ESCR0, MSR_P4_ALF_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_WC_BUFFER] = {
+		.opcode		= P4_OPCODE(P4_EVENT_WC_BUFFER),
+		.escr_msr	= { MSR_P4_DAC_ESCR0, MSR_P4_DAC_ESCR1 },
+		.cntr		= { {8, 9, -1}, {10, 11, -1} },
+	},
+	[P4_EVENT_B2B_CYCLES] = {
+		.opcode		= P4_OPCODE(P4_EVENT_B2B_CYCLES),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_BNR] = {
+		.opcode		= P4_OPCODE(P4_EVENT_BNR),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_SNOOP] = {
+		.opcode		= P4_OPCODE(P4_EVENT_SNOOP),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_RESPONSE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_RESPONSE),
+		.escr_msr	= { MSR_P4_FSB_ESCR0, MSR_P4_FSB_ESCR1 },
+		.cntr		= { {0, -1, -1}, {2, -1, -1} },
+	},
+	[P4_EVENT_FRONT_END_EVENT] = {
+		.opcode		= P4_OPCODE(P4_EVENT_FRONT_END_EVENT),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_EXECUTION_EVENT] = {
+		.opcode		= P4_OPCODE(P4_EVENT_EXECUTION_EVENT),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_REPLAY_EVENT] = {
+		.opcode		= P4_OPCODE(P4_EVENT_REPLAY_EVENT),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_INSTR_RETIRED] = {
+		.opcode		= P4_OPCODE(P4_EVENT_INSTR_RETIRED),
+		.escr_msr	= { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_UOPS_RETIRED] = {
+		.opcode		= P4_OPCODE(P4_EVENT_UOPS_RETIRED),
+		.escr_msr	= { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_UOP_TYPE] = {
+		.opcode		= P4_OPCODE(P4_EVENT_UOP_TYPE),
+		.escr_msr	= { MSR_P4_RAT_ESCR0, MSR_P4_RAT_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_BRANCH_RETIRED] = {
+		.opcode		= P4_OPCODE(P4_EVENT_BRANCH_RETIRED),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_MISPRED_BRANCH_RETIRED] = {
+		.opcode		= P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED),
+		.escr_msr	= { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_X87_ASSIST] = {
+		.opcode		= P4_OPCODE(P4_EVENT_X87_ASSIST),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_MACHINE_CLEAR] = {
+		.opcode		= P4_OPCODE(P4_EVENT_MACHINE_CLEAR),
+		.escr_msr	= { MSR_P4_CRU_ESCR2, MSR_P4_CRU_ESCR3 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+	[P4_EVENT_INSTR_COMPLETED] = {
+		.opcode		= P4_OPCODE(P4_EVENT_INSTR_COMPLETED),
+		.escr_msr	= { MSR_P4_CRU_ESCR0, MSR_P4_CRU_ESCR1 },
+		.cntr		= { {12, 13, 16}, {14, 15, 17} },
+	},
+};
+
+#define P4_GEN_CACHE_EVENT(event, bit, cache_event)			  \
+	p4_config_pack_escr(P4_ESCR_EVENT(event)			| \
+			    P4_ESCR_EMASK_BIT(event, bit))		| \
+	p4_config_pack_cccr(cache_event					| \
+			    P4_CCCR_ESEL(P4_OPCODE_ESEL(P4_OPCODE(event))))
+
+static __initconst const u64 p4_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
+						P4_CACHE__1stl_cache_load_miss_retired),
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
+						P4_CACHE__2ndl_cache_load_miss_retired),
+	},
+},
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
+						P4_CACHE__dtlb_load_miss_retired),
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
+						P4_CACHE__dtlb_store_miss_retired),
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, HIT,
+						P4_CACHE__itlb_reference_hit),
+		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, MISS,
+						P4_CACHE__itlb_reference_miss),
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static u64 p4_general_events[PERF_COUNT_HW_MAX] = {
+  /* non-halted CPU clocks */
+  [PERF_COUNT_HW_CPU_CYCLES] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_GLOBAL_POWER_EVENTS)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_GLOBAL_POWER_EVENTS, RUNNING)),
+
+  /*
+   * retired instructions
+   * in a sake of simplicity we don't use the FSB tagging
+   */
+  [PERF_COUNT_HW_INSTRUCTIONS] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_INSTR_RETIRED)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_INSTR_RETIRED, NBOGUSNTAG)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_INSTR_RETIRED, BOGUSNTAG)),
+
+  /* cache hits */
+  [PERF_COUNT_HW_CACHE_REFERENCES] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_BSQ_CACHE_REFERENCE)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITS)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITE)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITM)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITS)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITE)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITM)),
+
+  /* cache misses */
+  [PERF_COUNT_HW_CACHE_MISSES] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_BSQ_CACHE_REFERENCE)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_MISS)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_MISS)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_BSQ_CACHE_REFERENCE, WR_2ndL_MISS)),
+
+  /* branch instructions retired */
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_RETIRED_BRANCH_TYPE)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_RETIRED_BRANCH_TYPE, CONDITIONAL)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_RETIRED_BRANCH_TYPE, CALL)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_RETIRED_BRANCH_TYPE, RETURN)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_RETIRED_BRANCH_TYPE, INDIRECT)),
+
+  /* mispredicted branches retired */
+  [PERF_COUNT_HW_BRANCH_MISSES]	=
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_MISPRED_BRANCH_RETIRED)	|
+		P4_ESCR_EMASK_BIT(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS)),
+
+  /* bus ready clocks (cpu is driving #DRDY_DRV\#DRDY_OWN):  */
+  [PERF_COUNT_HW_BUS_CYCLES] =
+	p4_config_pack_escr(P4_ESCR_EVENT(P4_EVENT_FSB_DATA_ACTIVITY)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_DRV)		|
+		P4_ESCR_EMASK_BIT(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_OWN))	|
+	p4_config_pack_cccr(P4_CCCR_EDGE | P4_CCCR_COMPARE),
+};
+
+static struct p4_event_bind *p4_config_get_bind(u64 config)
+{
+	unsigned int evnt = p4_config_unpack_event(config);
+	struct p4_event_bind *bind = NULL;
+
+	if (evnt < ARRAY_SIZE(p4_event_bind_map))
+		bind = &p4_event_bind_map[evnt];
+
+	return bind;
+}
+
+static u64 p4_pmu_event_map(int hw_event)
+{
+	struct p4_event_bind *bind;
+	unsigned int esel;
+	u64 config;
+
+	config = p4_general_events[hw_event];
+	bind = p4_config_get_bind(config);
+	esel = P4_OPCODE_ESEL(bind->opcode);
+	config |= p4_config_pack_cccr(P4_CCCR_ESEL(esel));
+
+	return config;
+}
+
+static int p4_hw_config(struct perf_event *event)
+{
+	int cpu = get_cpu();
+	int rc = 0;
+	unsigned int evnt;
+	u32 escr, cccr;
+
+	/*
+	 * the reason we use cpu that early is that: if we get scheduled
+	 * first time on the same cpu -- we will not need swap thread
+	 * specific flags in config (and will save some cpu cycles)
+	 */
+
+	cccr = p4_default_cccr_conf(cpu);
+	escr = p4_default_escr_conf(cpu, event->attr.exclude_kernel,
+					 event->attr.exclude_user);
+	event->hw.config = p4_config_pack_escr(escr) |
+			   p4_config_pack_cccr(cccr);
+
+	if (p4_ht_active() && p4_ht_thread(cpu))
+		event->hw.config = p4_set_ht_bit(event->hw.config);
+
+	if (event->attr.type == PERF_TYPE_RAW) {
+
+		/* user data may have out-of-bound event index */
+		evnt = p4_config_unpack_event(event->attr.config);
+		if (evnt >= ARRAY_SIZE(p4_event_bind_map)) {
+			rc = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * We don't control raw events so it's up to the caller
+		 * to pass sane values (and we don't count the thread number
+		 * on HT machine but allow HT-compatible specifics to be
+		 * passed on)
+		 *
+		 * XXX: HT wide things should check perf_paranoid_cpu() &&
+		 *      CAP_SYS_ADMIN
+		 */
+		event->hw.config |= event->attr.config &
+			(p4_config_pack_escr(P4_ESCR_MASK_HT) |
+			 p4_config_pack_cccr(P4_CCCR_MASK_HT));
+	}
+
+	rc = x86_setup_perfctr(event);
+out:
+	put_cpu();
+	return rc;
+}
+
+static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
+{
+	int overflow = 0;
+	u32 low, high;
+
+	rdmsr(hwc->config_base + hwc->idx, low, high);
+
+	/* we need to check high bit for unflagged overflows */
+	if ((low & P4_CCCR_OVF) || !(high & (1 << 31))) {
+		overflow = 1;
+		(void)checking_wrmsrl(hwc->config_base + hwc->idx,
+			((u64)low) & ~P4_CCCR_OVF);
+	}
+
+	return overflow;
+}
+
+static inline void p4_pmu_disable_event(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/*
+	 * If event gets disabled while counter is in overflowed
+	 * state we need to clear P4_CCCR_OVF, otherwise interrupt get
+	 * asserted again and again
+	 */
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx,
+		(u64)(p4_config_unpack_cccr(hwc->config)) &
+			~P4_CCCR_ENABLE & ~P4_CCCR_OVF & ~P4_CCCR_RESERVED);
+}
+
+static void p4_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx;
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		struct perf_event *event = cpuc->events[idx];
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		p4_pmu_disable_event(event);
+	}
+}
+
+static void p4_pmu_enable_event(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int thread = p4_ht_config_thread(hwc->config);
+	u64 escr_conf = p4_config_unpack_escr(p4_clear_ht_bit(hwc->config));
+	unsigned int idx = p4_config_unpack_event(hwc->config);
+	unsigned int idx_cache = p4_config_unpack_cache_event(hwc->config);
+	struct p4_event_bind *bind;
+	struct p4_cache_event_bind *bind_cache;
+	u64 escr_addr, cccr;
+
+	bind = &p4_event_bind_map[idx];
+	escr_addr = (u64)bind->escr_msr[thread];
+
+	/*
+	 * - we dont support cascaded counters yet
+	 * - and counter 1 is broken (erratum)
+	 */
+	WARN_ON_ONCE(p4_is_event_cascaded(hwc->config));
+	WARN_ON_ONCE(hwc->idx == 1);
+
+	/* we need a real Event value */
+	escr_conf &= ~P4_ESCR_EVENT_MASK;
+	escr_conf |= P4_ESCR_EVENT(P4_OPCODE_EVNT(bind->opcode));
+
+	cccr = p4_config_unpack_cccr(hwc->config);
+
+	/*
+	 * it could be Cache event so that we need to
+	 * set metrics into additional MSRs
+	 */
+	BUILD_BUG_ON(P4_CACHE__MAX > P4_CCCR_CACHE_OPS_MASK);
+	if (idx_cache > P4_CACHE__NONE &&
+		idx_cache < ARRAY_SIZE(p4_cache_event_bind_map)) {
+		bind_cache = &p4_cache_event_bind_map[idx_cache];
+		(void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)bind_cache->metric_pebs);
+		(void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)bind_cache->metric_vert);
+	}
+
+	(void)checking_wrmsrl(escr_addr, escr_conf);
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx,
+				(cccr & ~P4_CCCR_RESERVED) | P4_CCCR_ENABLE);
+}
+
+static void p4_pmu_enable_all(int added)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx;
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		struct perf_event *event = cpuc->events[idx];
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		p4_pmu_enable_event(event);
+	}
+}
+
+static int p4_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, handled = 0;
+	u64 val;
+
+	data.addr = 0;
+	data.raw = NULL;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		event = cpuc->events[idx];
+		hwc = &event->hw;
+
+		WARN_ON_ONCE(hwc->idx != idx);
+
+		/* it might be unflagged overflow */
+		handled = p4_pmu_clear_cccr_ovf(hwc);
+
+		val = x86_perf_event_update(event);
+		if (!handled && (val & (1ULL << (x86_pmu.cntval_bits - 1))))
+			continue;
+
+		/* event overflow for sure */
+		data.period = event->hw.last_period;
+
+		if (!x86_perf_event_set_period(event))
+			continue;
+		if (perf_event_overflow(event, 1, &data, regs))
+			p4_pmu_disable_event(event);
+	}
+
+	if (handled) {
+		/* p4 quirk: unmask it again */
+		apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+		inc_irq_stat(apic_perf_irqs);
+	}
+
+	return handled;
+}
+
+/*
+ * swap thread specific fields according to a thread
+ * we are going to run on
+ */
+static void p4_pmu_swap_config_ts(struct hw_perf_event *hwc, int cpu)
+{
+	u32 escr, cccr;
+
+	/*
+	 * we either lucky and continue on same cpu or no HT support
+	 */
+	if (!p4_should_swap_ts(hwc->config, cpu))
+		return;
+
+	/*
+	 * the event is migrated from an another logical
+	 * cpu, so we need to swap thread specific flags
+	 */
+
+	escr = p4_config_unpack_escr(hwc->config);
+	cccr = p4_config_unpack_cccr(hwc->config);
+
+	if (p4_ht_thread(cpu)) {
+		cccr &= ~P4_CCCR_OVF_PMI_T0;
+		cccr |= P4_CCCR_OVF_PMI_T1;
+		if (escr & P4_ESCR_T0_OS) {
+			escr &= ~P4_ESCR_T0_OS;
+			escr |= P4_ESCR_T1_OS;
+		}
+		if (escr & P4_ESCR_T0_USR) {
+			escr &= ~P4_ESCR_T0_USR;
+			escr |= P4_ESCR_T1_USR;
+		}
+		hwc->config  = p4_config_pack_escr(escr);
+		hwc->config |= p4_config_pack_cccr(cccr);
+		hwc->config |= P4_CONFIG_HT;
+	} else {
+		cccr &= ~P4_CCCR_OVF_PMI_T1;
+		cccr |= P4_CCCR_OVF_PMI_T0;
+		if (escr & P4_ESCR_T1_OS) {
+			escr &= ~P4_ESCR_T1_OS;
+			escr |= P4_ESCR_T0_OS;
+		}
+		if (escr & P4_ESCR_T1_USR) {
+			escr &= ~P4_ESCR_T1_USR;
+			escr |= P4_ESCR_T0_USR;
+		}
+		hwc->config  = p4_config_pack_escr(escr);
+		hwc->config |= p4_config_pack_cccr(cccr);
+		hwc->config &= ~P4_CONFIG_HT;
+	}
+}
+
+/*
+ * ESCR address hashing is tricky, ESCRs are not sequential
+ * in memory but all starts from MSR_P4_BSU_ESCR0 (0x03a0) and
+ * the metric between any ESCRs is laid in range [0xa0,0xe1]
+ *
+ * so we make ~70% filled hashtable
+ */
+
+#define P4_ESCR_MSR_BASE		0x000003a0
+#define P4_ESCR_MSR_MAX			0x000003e1
+#define P4_ESCR_MSR_TABLE_SIZE		(P4_ESCR_MSR_MAX - P4_ESCR_MSR_BASE + 1)
+#define P4_ESCR_MSR_IDX(msr)		(msr - P4_ESCR_MSR_BASE)
+#define P4_ESCR_MSR_TABLE_ENTRY(msr)	[P4_ESCR_MSR_IDX(msr)] = msr
+
+static const unsigned int p4_escr_table[P4_ESCR_MSR_TABLE_SIZE] = {
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_ALF_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_ALF_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_BPU_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_BPU_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_BSU_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_BSU_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR2),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR3),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR4),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_CRU_ESCR5),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_DAC_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_DAC_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FIRM_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FIRM_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FLAME_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FLAME_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FSB_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_FSB_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IQ_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IQ_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IS_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IS_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_ITLB_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_ITLB_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IX_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_IX_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_MOB_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_MOB_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_MS_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_MS_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_PMH_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_PMH_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_RAT_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_RAT_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_SAAT_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_SAAT_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_SSU_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_SSU_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_TBPU_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_TBPU_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_TC_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_TC_ESCR1),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_U2L_ESCR0),
+	P4_ESCR_MSR_TABLE_ENTRY(MSR_P4_U2L_ESCR1),
+};
+
+static int p4_get_escr_idx(unsigned int addr)
+{
+	unsigned int idx = P4_ESCR_MSR_IDX(addr);
+
+	if (unlikely(idx >= P4_ESCR_MSR_TABLE_SIZE	||
+			!p4_escr_table[idx]		||
+			p4_escr_table[idx] != addr)) {
+		WARN_ONCE(1, "P4 PMU: Wrong address passed: %x\n", addr);
+		return -1;
+	}
+
+	return idx;
+}
+
+static int p4_next_cntr(int thread, unsigned long *used_mask,
+			struct p4_event_bind *bind)
+{
+	int i, j;
+
+	for (i = 0; i < P4_CNTR_LIMIT; i++) {
+		j = bind->cntr[thread][i];
+		if (j != -1 && !test_bit(j, used_mask))
+			return j;
+	}
+
+	return -1;
+}
+
+static int p4_pmu_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign)
+{
+	unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long escr_mask[BITS_TO_LONGS(P4_ESCR_MSR_TABLE_SIZE)];
+	int cpu = smp_processor_id();
+	struct hw_perf_event *hwc;
+	struct p4_event_bind *bind;
+	unsigned int i, thread, num;
+	int cntr_idx, escr_idx;
+
+	bitmap_zero(used_mask, X86_PMC_IDX_MAX);
+	bitmap_zero(escr_mask, P4_ESCR_MSR_TABLE_SIZE);
+
+	for (i = 0, num = n; i < n; i++, num--) {
+
+		hwc = &cpuc->event_list[i]->hw;
+		thread = p4_ht_thread(cpu);
+		bind = p4_config_get_bind(hwc->config);
+		escr_idx = p4_get_escr_idx(bind->escr_msr[thread]);
+		if (unlikely(escr_idx == -1))
+			goto done;
+
+		if (hwc->idx != -1 && !p4_should_swap_ts(hwc->config, cpu)) {
+			cntr_idx = hwc->idx;
+			if (assign)
+				assign[i] = hwc->idx;
+			goto reserve;
+		}
+
+		cntr_idx = p4_next_cntr(thread, used_mask, bind);
+		if (cntr_idx == -1 || test_bit(escr_idx, escr_mask))
+			goto done;
+
+		p4_pmu_swap_config_ts(hwc, cpu);
+		if (assign)
+			assign[i] = cntr_idx;
+reserve:
+		set_bit(cntr_idx, used_mask);
+		set_bit(escr_idx, escr_mask);
+	}
+
+done:
+	return num ? -ENOSPC : 0;
+}
+
+static __initconst const struct x86_pmu p4_pmu = {
+	.name			= "Netburst P4/Xeon",
+	.handle_irq		= p4_pmu_handle_irq,
+	.disable_all		= p4_pmu_disable_all,
+	.enable_all		= p4_pmu_enable_all,
+	.enable			= p4_pmu_enable_event,
+	.disable		= p4_pmu_disable_event,
+	.eventsel		= MSR_P4_BPU_CCCR0,
+	.perfctr		= MSR_P4_BPU_PERFCTR0,
+	.event_map		= p4_pmu_event_map,
+	.max_events		= ARRAY_SIZE(p4_general_events),
+	.get_event_constraints	= x86_get_event_constraints,
+	/*
+	 * IF HT disabled we may need to use all
+	 * ARCH_P4_MAX_CCCR counters simulaneously
+	 * though leave it restricted at moment assuming
+	 * HT is on
+	 */
+	.num_counters		= ARCH_P4_MAX_CCCR,
+	.apic			= 1,
+	.cntval_bits		= 40,
+	.cntval_mask		= (1ULL << 40) - 1,
+	.max_period		= (1ULL << 39) - 1,
+	.hw_config		= p4_hw_config,
+	.schedule_events	= p4_pmu_schedule_events,
+};
+
+static __init int p4_pmu_init(void)
+{
+	unsigned int low, high;
+
+	/* If we get stripped -- indexig fails */
+	BUILD_BUG_ON(ARCH_P4_MAX_CCCR > X86_PMC_MAX_GENERIC);
+
+	rdmsr(MSR_IA32_MISC_ENABLE, low, high);
+	if (!(low & (1 << 7))) {
+		pr_cont("unsupported Netburst CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	memcpy(hw_cache_event_ids, p4_hw_cache_event_ids,
+		sizeof(hw_cache_event_ids));
+
+	pr_cont("Netburst events, ");
+
+	x86_pmu = p4_pmu;
+
+	return 0;
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
new file mode 100644
index 0000000..34ba07b
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -0,0 +1,142 @@
+#ifdef CONFIG_CPU_SUP_INTEL
+
+/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
+};
+
+static u64 p6_pmu_event_map(int hw_event)
+{
+	return p6_perfmon_event_map[hw_event];
+}
+
+/*
+ * Event setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_EVENT			0x0000002EULL
+
+static struct event_constraint p6_event_constraints[] =
+{
+	INTEL_EVENT_CONSTRAINT(0xc1, 0x1),	/* FLOPS */
+	INTEL_EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	INTEL_EVENT_CONSTRAINT(0x11, 0x1),	/* FP_ASSIST */
+	INTEL_EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	INTEL_EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	INTEL_EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT_END
+};
+
+static void p6_pmu_disable_all(void)
+{
+	u64 val;
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static void p6_pmu_enable_all(int added)
+{
+	unsigned long val;
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static inline void
+p6_pmu_disable_event(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 val = P6_NOP_EVENT;
+
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx, val);
+}
+
+static void p6_pmu_enable_event(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + hwc->idx, val);
+}
+
+static __initconst const struct x86_pmu p6_pmu = {
+	.name			= "p6",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= p6_pmu_disable_all,
+	.enable_all		= p6_pmu_enable_all,
+	.enable			= p6_pmu_enable_event,
+	.disable		= p6_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_P6_EVNTSEL0,
+	.perfctr		= MSR_P6_PERFCTR0,
+	.event_map		= p6_pmu_event_map,
+	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.apic			= 1,
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_counters		= 2,
+	/*
+	 * Events have 40 bits implemented. However they are designed such
+	 * that bits [32-39] are sign extensions of bit 31. As such the
+	 * effective width of a event for P6-like PMU is 32 bits only.
+	 *
+	 * See IA-32 Intel Architecture Software developer manual Vol 3B
+	 */
+	.cntval_bits		= 32,
+	.cntval_mask		= (1ULL << 32) - 1,
+	.get_event_constraints	= x86_get_event_constraints,
+	.event_constraints	= p6_event_constraints,
+};
+
+static __init int p6_pmu_init(void)
+{
+	switch (boot_cpu_data.x86_model) {
+	case 1:
+	case 3:  /* Pentium Pro */
+	case 5:
+	case 6:  /* Pentium II */
+	case 7:
+	case 8:
+	case 11: /* Pentium III */
+	case 9:
+	case 13:
+		/* Pentium M */
+		break;
+	default:
+		pr_cont("unsupported p6 CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	x86_pmu = p6_pmu;
+
+	return 0;
+}
+
+#endif /* CONFIG_CPU_SUP_INTEL */
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 898df97..fb329e9 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -115,17 +115,6 @@ int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
 
 	return !test_bit(counter, perfctr_nmi_owner);
 }
-
-/* checks the an msr for availability */
-int avail_to_resrv_perfctr_nmi(unsigned int msr)
-{
-	unsigned int counter;
-
-	counter = nmi_perfctr_msr_to_bit(msr);
-	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	return !test_bit(counter, perfctr_nmi_owner);
-}
 EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
 
 int reserve_perfctr_nmi(unsigned int msr)
@@ -691,7 +680,7 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	cpu_nmi_set_wd_enabled();
 
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE;
 	wrmsr(evntsel_msr, evntsel, 0);
 	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 1cbed97..b9d1ff5 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -22,9 +22,10 @@
  */
 
 #include <linux/dmi.h>
+#include <linux/module.h>
 #include <asm/div64.h>
-#include <asm/vmware.h>
 #include <asm/x86_init.h>
+#include <asm/hypervisor.h>
 
 #define CPUID_VMWARE_INFO_LEAF	0x40000000
 #define VMWARE_HYPERVISOR_MAGIC	0x564D5868
@@ -64,7 +65,7 @@ static unsigned long vmware_get_tsc_khz(void)
 	return tsc_hz;
 }
 
-void __init vmware_platform_setup(void)
+static void __init vmware_platform_setup(void)
 {
 	uint32_t eax, ebx, ecx, edx;
 
@@ -82,24 +83,21 @@ void __init vmware_platform_setup(void)
  * serial key should be enough, as this will always have a VMware
  * specific string when running under VMware hypervisor.
  */
-int vmware_platform(void)
+static bool __init vmware_platform(void)
 {
 	if (cpu_has_hypervisor) {
-		unsigned int eax, ebx, ecx, edx;
-		char hyper_vendor_id[13];
-
-		cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &ebx, &ecx, &edx);
-		memcpy(hyper_vendor_id + 0, &ebx, 4);
-		memcpy(hyper_vendor_id + 4, &ecx, 4);
-		memcpy(hyper_vendor_id + 8, &edx, 4);
-		hyper_vendor_id[12] = '\0';
-		if (!strcmp(hyper_vendor_id, "VMwareVMware"))
-			return 1;
+		unsigned int eax;
+		unsigned int hyper_vendor_id[3];
+
+		cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &hyper_vendor_id[0],
+		      &hyper_vendor_id[1], &hyper_vendor_id[2]);
+		if (!memcmp(hyper_vendor_id, "VMwareVMware", 12))
+			return true;
 	} else if (dmi_available && dmi_name_in_serial("VMware") &&
 		   __vmware_platform())
-		return 1;
+		return true;
 
-	return 0;
+	return false;
 }
 
 /*
@@ -114,8 +112,16 @@ int vmware_platform(void)
  * so that the kernel could just trust the hypervisor with providing a
  * reliable virtual TSC that is suitable for timekeeping.
  */
-void __cpuinit vmware_set_feature_bits(struct cpuinfo_x86 *c)
+static void __cpuinit vmware_set_cpu_features(struct cpuinfo_x86 *c)
 {
 	set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE);
 }
+
+const __refconst struct hypervisor_x86 x86_hyper_vmware = {
+	.name			= "VMware",
+	.detect			= vmware_platform,
+	.set_cpu_features	= vmware_set_cpu_features,
+	.init_platform		= vmware_platform_setup,
+};
+EXPORT_SYMBOL(x86_hyper_vmware);
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 83e5e62..1b7b31a 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -40,6 +40,7 @@
 #include <linux/cpu.h>
 #include <linux/notifier.h>
 #include <linux/uaccess.h>
+#include <linux/gfp.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
@@ -169,7 +170,7 @@ static int __cpuinit cpuid_class_cpu_callback(struct notifier_block *nfb,
 		cpuid_device_destroy(cpu);
 		break;
 	}
-	return err ? NOTIFY_BAD : NOTIFY_OK;
+	return notifier_from_errno(err);
 }
 
 static struct notifier_block __refdata cpuid_class_cpu_notifier =
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index a4849c1..ebd4c51 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -27,7 +27,6 @@
 #include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
-#include <asm/x86_init.h>
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 
@@ -103,10 +102,5 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 #ifdef CONFIG_HPET_TIMER
 	hpet_disable();
 #endif
-
-#ifdef CONFIG_X86_64
-	x86_platform.iommu_shutdown();
-#endif
-
 	crash_save_cpu(regs, safe_smp_processor_id());
 }
diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c
index cd97ce1..6741455 100644
--- a/arch/x86/kernel/crash_dump_32.c
+++ b/arch/x86/kernel/crash_dump_32.c
@@ -5,6 +5,7 @@
  *	Copyright (C) IBM Corporation, 2004. All rights reserved
  */
 
+#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/highmem.h>
 #include <linux/crash_dump.h>
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
deleted file mode 100644
index 1c47390..0000000
--- a/arch/x86/kernel/ds.c
+++ /dev/null
@@ -1,1437 +0,0 @@
-/*
- * Debug Store support
- *
- * This provides a low-level interface to the hardware's Debug Store
- * feature that is used for branch trace store (BTS) and
- * precise-event based sampling (PEBS).
- *
- * It manages:
- * - DS and BTS hardware configuration
- * - buffer overflow handling (to be done)
- * - buffer access
- *
- * It does not do:
- * - security checking (is the caller allowed to trace the task)
- * - buffer allocation (memory accounting)
- *
- *
- * Copyright (C) 2007-2009 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/trace_clock.h>
-
-#include <asm/ds.h>
-
-#include "ds_selftest.h"
-
-/*
- * The configuration for a particular DS hardware implementation:
- */
-struct ds_configuration {
-	/* The name of the configuration: */
-	const char		*name;
-
-	/* The size of pointer-typed fields in DS, BTS, and PEBS: */
-	unsigned char		sizeof_ptr_field;
-
-	/* The size of a BTS/PEBS record in bytes: */
-	unsigned char		sizeof_rec[2];
-
-	/* The number of pebs counter reset values in the DS structure. */
-	unsigned char		nr_counter_reset;
-
-	/* Control bit-masks indexed by enum ds_feature: */
-	unsigned long		ctl[dsf_ctl_max];
-};
-static struct ds_configuration ds_cfg __read_mostly;
-
-
-/* Maximal size of a DS configuration: */
-#define MAX_SIZEOF_DS		0x80
-
-/* Maximal size of a BTS record: */
-#define MAX_SIZEOF_BTS		(3 * 8)
-
-/* BTS and PEBS buffer alignment: */
-#define DS_ALIGNMENT		(1 << 3)
-
-/* Number of buffer pointers in DS: */
-#define NUM_DS_PTR_FIELDS	8
-
-/* Size of a pebs reset value in DS: */
-#define PEBS_RESET_FIELD_SIZE	8
-
-/* Mask of control bits in the DS MSR register: */
-#define BTS_CONTROL				  \
-	( ds_cfg.ctl[dsf_bts]			| \
-	  ds_cfg.ctl[dsf_bts_kernel]		| \
-	  ds_cfg.ctl[dsf_bts_user]		| \
-	  ds_cfg.ctl[dsf_bts_overflow] )
-
-/*
- * A BTS or PEBS tracer.
- *
- * This holds the configuration of the tracer and serves as a handle
- * to identify tracers.
- */
-struct ds_tracer {
-	/* The DS context (partially) owned by this tracer. */
-	struct ds_context	*context;
-	/* The buffer provided on ds_request() and its size in bytes. */
-	void			*buffer;
-	size_t			size;
-};
-
-struct bts_tracer {
-	/* The common DS part: */
-	struct ds_tracer	ds;
-
-	/* The trace including the DS configuration: */
-	struct bts_trace	trace;
-
-	/* Buffer overflow notification function: */
-	bts_ovfl_callback_t	ovfl;
-
-	/* Active flags affecting trace collection. */
-	unsigned int		flags;
-};
-
-struct pebs_tracer {
-	/* The common DS part: */
-	struct ds_tracer	ds;
-
-	/* The trace including the DS configuration: */
-	struct pebs_trace	trace;
-
-	/* Buffer overflow notification function: */
-	pebs_ovfl_callback_t	ovfl;
-};
-
-/*
- * Debug Store (DS) save area configuration (see Intel64 and IA32
- * Architectures Software Developer's Manual, section 18.5)
- *
- * The DS configuration consists of the following fields; different
- * architetures vary in the size of those fields.
- *
- * - double-word aligned base linear address of the BTS buffer
- * - write pointer into the BTS buffer
- * - end linear address of the BTS buffer (one byte beyond the end of
- *   the buffer)
- * - interrupt pointer into BTS buffer
- *   (interrupt occurs when write pointer passes interrupt pointer)
- * - double-word aligned base linear address of the PEBS buffer
- * - write pointer into the PEBS buffer
- * - end linear address of the PEBS buffer (one byte beyond the end of
- *   the buffer)
- * - interrupt pointer into PEBS buffer
- *   (interrupt occurs when write pointer passes interrupt pointer)
- * - value to which counter is reset following counter overflow
- *
- * Later architectures use 64bit pointers throughout, whereas earlier
- * architectures use 32bit pointers in 32bit mode.
- *
- *
- * We compute the base address for the first 8 fields based on:
- * - the field size stored in the DS configuration
- * - the relative field position
- * - an offset giving the start of the respective region
- *
- * This offset is further used to index various arrays holding
- * information for BTS and PEBS at the respective index.
- *
- * On later 32bit processors, we only access the lower 32bit of the
- * 64bit pointer fields. The upper halves will be zeroed out.
- */
-
-enum ds_field {
-	ds_buffer_base = 0,
-	ds_index,
-	ds_absolute_maximum,
-	ds_interrupt_threshold,
-};
-
-enum ds_qualifier {
-	ds_bts = 0,
-	ds_pebs
-};
-
-static inline unsigned long
-ds_get(const unsigned char *base, enum ds_qualifier qual, enum ds_field field)
-{
-	base += (ds_cfg.sizeof_ptr_field * (field + (4 * qual)));
-	return *(unsigned long *)base;
-}
-
-static inline void
-ds_set(unsigned char *base, enum ds_qualifier qual, enum ds_field field,
-       unsigned long value)
-{
-	base += (ds_cfg.sizeof_ptr_field * (field + (4 * qual)));
-	(*(unsigned long *)base) = value;
-}
-
-
-/*
- * Locking is done only for allocating BTS or PEBS resources.
- */
-static DEFINE_SPINLOCK(ds_lock);
-
-/*
- * We either support (system-wide) per-cpu or per-thread allocation.
- * We distinguish the two based on the task_struct pointer, where a
- * NULL pointer indicates per-cpu allocation for the current cpu.
- *
- * Allocations are use-counted. As soon as resources are allocated,
- * further allocations must be of the same type (per-cpu or
- * per-thread). We model this by counting allocations (i.e. the number
- * of tracers of a certain type) for one type negatively:
- *   =0  no tracers
- *   >0  number of per-thread tracers
- *   <0  number of per-cpu tracers
- *
- * Tracers essentially gives the number of ds contexts for a certain
- * type of allocation.
- */
-static atomic_t tracers = ATOMIC_INIT(0);
-
-static inline int get_tracer(struct task_struct *task)
-{
-	int error;
-
-	spin_lock_irq(&ds_lock);
-
-	if (task) {
-		error = -EPERM;
-		if (atomic_read(&tracers) < 0)
-			goto out;
-		atomic_inc(&tracers);
-	} else {
-		error = -EPERM;
-		if (atomic_read(&tracers) > 0)
-			goto out;
-		atomic_dec(&tracers);
-	}
-
-	error = 0;
-out:
-	spin_unlock_irq(&ds_lock);
-	return error;
-}
-
-static inline void put_tracer(struct task_struct *task)
-{
-	if (task)
-		atomic_dec(&tracers);
-	else
-		atomic_inc(&tracers);
-}
-
-/*
- * The DS context is either attached to a thread or to a cpu:
- * - in the former case, the thread_struct contains a pointer to the
- *   attached context.
- * - in the latter case, we use a static array of per-cpu context
- *   pointers.
- *
- * Contexts are use-counted. They are allocated on first access and
- * deallocated when the last user puts the context.
- */
-struct ds_context {
-	/* The DS configuration; goes into MSR_IA32_DS_AREA: */
-	unsigned char		ds[MAX_SIZEOF_DS];
-
-	/* The owner of the BTS and PEBS configuration, respectively: */
-	struct bts_tracer	*bts_master;
-	struct pebs_tracer	*pebs_master;
-
-	/* Use count: */
-	unsigned long		count;
-
-	/* Pointer to the context pointer field: */
-	struct ds_context	**this;
-
-	/* The traced task; NULL for cpu tracing: */
-	struct task_struct	*task;
-
-	/* The traced cpu; only valid if task is NULL: */
-	int			cpu;
-};
-
-static DEFINE_PER_CPU(struct ds_context *, cpu_ds_context);
-
-
-static struct ds_context *ds_get_context(struct task_struct *task, int cpu)
-{
-	struct ds_context **p_context =
-		(task ? &task->thread.ds_ctx : &per_cpu(cpu_ds_context, cpu));
-	struct ds_context *context = NULL;
-	struct ds_context *new_context = NULL;
-
-	/* Chances are small that we already have a context. */
-	new_context = kzalloc(sizeof(*new_context), GFP_KERNEL);
-	if (!new_context)
-		return NULL;
-
-	spin_lock_irq(&ds_lock);
-
-	context = *p_context;
-	if (likely(!context)) {
-		context = new_context;
-
-		context->this = p_context;
-		context->task = task;
-		context->cpu = cpu;
-		context->count = 0;
-
-		*p_context = context;
-	}
-
-	context->count++;
-
-	spin_unlock_irq(&ds_lock);
-
-	if (context != new_context)
-		kfree(new_context);
-
-	return context;
-}
-
-static void ds_put_context(struct ds_context *context)
-{
-	struct task_struct *task;
-	unsigned long irq;
-
-	if (!context)
-		return;
-
-	spin_lock_irqsave(&ds_lock, irq);
-
-	if (--context->count) {
-		spin_unlock_irqrestore(&ds_lock, irq);
-		return;
-	}
-
-	*(context->this) = NULL;
-
-	task = context->task;
-
-	if (task)
-		clear_tsk_thread_flag(task, TIF_DS_AREA_MSR);
-
-	/*
-	 * We leave the (now dangling) pointer to the DS configuration in
-	 * the DS_AREA msr. This is as good or as bad as replacing it with
-	 * NULL - the hardware would crash if we enabled tracing.
-	 *
-	 * This saves us some problems with having to write an msr on a
-	 * different cpu while preventing others from doing the same for the
-	 * next context for that same cpu.
-	 */
-
-	spin_unlock_irqrestore(&ds_lock, irq);
-
-	/* The context might still be in use for context switching. */
-	if (task && (task != current))
-		wait_task_context_switch(task);
-
-	kfree(context);
-}
-
-static void ds_install_ds_area(struct ds_context *context)
-{
-	unsigned long ds;
-
-	ds = (unsigned long)context->ds;
-
-	/*
-	 * There is a race between the bts master and the pebs master.
-	 *
-	 * The thread/cpu access is synchronized via get/put_cpu() for
-	 * task tracing and via wrmsr_on_cpu for cpu tracing.
-	 *
-	 * If bts and pebs are collected for the same task or same cpu,
-	 * the same confiuration is written twice.
-	 */
-	if (context->task) {
-		get_cpu();
-		if (context->task == current)
-			wrmsrl(MSR_IA32_DS_AREA, ds);
-		set_tsk_thread_flag(context->task, TIF_DS_AREA_MSR);
-		put_cpu();
-	} else
-		wrmsr_on_cpu(context->cpu, MSR_IA32_DS_AREA,
-			     (u32)((u64)ds), (u32)((u64)ds >> 32));
-}
-
-/*
- * Call the tracer's callback on a buffer overflow.
- *
- * context: the ds context
- * qual: the buffer type
- */
-static void ds_overflow(struct ds_context *context, enum ds_qualifier qual)
-{
-	switch (qual) {
-	case ds_bts:
-		if (context->bts_master &&
-		    context->bts_master->ovfl)
-			context->bts_master->ovfl(context->bts_master);
-		break;
-	case ds_pebs:
-		if (context->pebs_master &&
-		    context->pebs_master->ovfl)
-			context->pebs_master->ovfl(context->pebs_master);
-		break;
-	}
-}
-
-
-/*
- * Write raw data into the BTS or PEBS buffer.
- *
- * The remainder of any partially written record is zeroed out.
- *
- * context: the DS context
- * qual:    the buffer type
- * record:  the data to write
- * size:    the size of the data
- */
-static int ds_write(struct ds_context *context, enum ds_qualifier qual,
-		    const void *record, size_t size)
-{
-	int bytes_written = 0;
-
-	if (!record)
-		return -EINVAL;
-
-	while (size) {
-		unsigned long base, index, end, write_end, int_th;
-		unsigned long write_size, adj_write_size;
-
-		/*
-		 * Write as much as possible without producing an
-		 * overflow interrupt.
-		 *
-		 * Interrupt_threshold must either be
-		 * - bigger than absolute_maximum or
-		 * - point to a record between buffer_base and absolute_maximum
-		 *
-		 * Index points to a valid record.
-		 */
-		base   = ds_get(context->ds, qual, ds_buffer_base);
-		index  = ds_get(context->ds, qual, ds_index);
-		end    = ds_get(context->ds, qual, ds_absolute_maximum);
-		int_th = ds_get(context->ds, qual, ds_interrupt_threshold);
-
-		write_end = min(end, int_th);
-
-		/*
-		 * If we are already beyond the interrupt threshold,
-		 * we fill the entire buffer.
-		 */
-		if (write_end <= index)
-			write_end = end;
-
-		if (write_end <= index)
-			break;
-
-		write_size = min((unsigned long) size, write_end - index);
-		memcpy((void *)index, record, write_size);
-
-		record = (const char *)record + write_size;
-		size -= write_size;
-		bytes_written += write_size;
-
-		adj_write_size = write_size / ds_cfg.sizeof_rec[qual];
-		adj_write_size *= ds_cfg.sizeof_rec[qual];
-
-		/* Zero out trailing bytes. */
-		memset((char *)index + write_size, 0,
-		       adj_write_size - write_size);
-		index += adj_write_size;
-
-		if (index >= end)
-			index = base;
-		ds_set(context->ds, qual, ds_index, index);
-
-		if (index >= int_th)
-			ds_overflow(context, qual);
-	}
-
-	return bytes_written;
-}
-
-
-/*
- * Branch Trace Store (BTS) uses the following format. Different
- * architectures vary in the size of those fields.
- * - source linear address
- * - destination linear address
- * - flags
- *
- * Later architectures use 64bit pointers throughout, whereas earlier
- * architectures use 32bit pointers in 32bit mode.
- *
- * We compute the base address for the fields based on:
- * - the field size stored in the DS configuration
- * - the relative field position
- *
- * In order to store additional information in the BTS buffer, we use
- * a special source address to indicate that the record requires
- * special interpretation.
- *
- * Netburst indicated via a bit in the flags field whether the branch
- * was predicted; this is ignored.
- *
- * We use two levels of abstraction:
- * - the raw data level defined here
- * - an arch-independent level defined in ds.h
- */
-
-enum bts_field {
-	bts_from,
-	bts_to,
-	bts_flags,
-
-	bts_qual		= bts_from,
-	bts_clock		= bts_to,
-	bts_pid			= bts_flags,
-
-	bts_qual_mask		= (bts_qual_max - 1),
-	bts_escape		= ((unsigned long)-1 & ~bts_qual_mask)
-};
-
-static inline unsigned long bts_get(const char *base, unsigned long field)
-{
-	base += (ds_cfg.sizeof_ptr_field * field);
-	return *(unsigned long *)base;
-}
-
-static inline void bts_set(char *base, unsigned long field, unsigned long val)
-{
-	base += (ds_cfg.sizeof_ptr_field * field);
-	(*(unsigned long *)base) = val;
-}
-
-
-/*
- * The raw BTS data is architecture dependent.
- *
- * For higher-level users, we give an arch-independent view.
- * - ds.h defines struct bts_struct
- * - bts_read translates one raw bts record into a bts_struct
- * - bts_write translates one bts_struct into the raw format and
- *   writes it into the top of the parameter tracer's buffer.
- *
- * return: bytes read/written on success; -Eerrno, otherwise
- */
-static int
-bts_read(struct bts_tracer *tracer, const void *at, struct bts_struct *out)
-{
-	if (!tracer)
-		return -EINVAL;
-
-	if (at < tracer->trace.ds.begin)
-		return -EINVAL;
-
-	if (tracer->trace.ds.end < (at + tracer->trace.ds.size))
-		return -EINVAL;
-
-	memset(out, 0, sizeof(*out));
-	if ((bts_get(at, bts_qual) & ~bts_qual_mask) == bts_escape) {
-		out->qualifier = (bts_get(at, bts_qual) & bts_qual_mask);
-		out->variant.event.clock = bts_get(at, bts_clock);
-		out->variant.event.pid = bts_get(at, bts_pid);
-	} else {
-		out->qualifier = bts_branch;
-		out->variant.lbr.from = bts_get(at, bts_from);
-		out->variant.lbr.to   = bts_get(at, bts_to);
-
-		if (!out->variant.lbr.from && !out->variant.lbr.to)
-			out->qualifier = bts_invalid;
-	}
-
-	return ds_cfg.sizeof_rec[ds_bts];
-}
-
-static int bts_write(struct bts_tracer *tracer, const struct bts_struct *in)
-{
-	unsigned char raw[MAX_SIZEOF_BTS];
-
-	if (!tracer)
-		return -EINVAL;
-
-	if (MAX_SIZEOF_BTS < ds_cfg.sizeof_rec[ds_bts])
-		return -EOVERFLOW;
-
-	switch (in->qualifier) {
-	case bts_invalid:
-		bts_set(raw, bts_from, 0);
-		bts_set(raw, bts_to, 0);
-		bts_set(raw, bts_flags, 0);
-		break;
-	case bts_branch:
-		bts_set(raw, bts_from, in->variant.lbr.from);
-		bts_set(raw, bts_to,   in->variant.lbr.to);
-		bts_set(raw, bts_flags, 0);
-		break;
-	case bts_task_arrives:
-	case bts_task_departs:
-		bts_set(raw, bts_qual, (bts_escape | in->qualifier));
-		bts_set(raw, bts_clock, in->variant.event.clock);
-		bts_set(raw, bts_pid, in->variant.event.pid);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return ds_write(tracer->ds.context, ds_bts, raw,
-			ds_cfg.sizeof_rec[ds_bts]);
-}
-
-
-static void ds_write_config(struct ds_context *context,
-			    struct ds_trace *cfg, enum ds_qualifier qual)
-{
-	unsigned char *ds = context->ds;
-
-	ds_set(ds, qual, ds_buffer_base, (unsigned long)cfg->begin);
-	ds_set(ds, qual, ds_index, (unsigned long)cfg->top);
-	ds_set(ds, qual, ds_absolute_maximum, (unsigned long)cfg->end);
-	ds_set(ds, qual, ds_interrupt_threshold, (unsigned long)cfg->ith);
-}
-
-static void ds_read_config(struct ds_context *context,
-			   struct ds_trace *cfg, enum ds_qualifier qual)
-{
-	unsigned char *ds = context->ds;
-
-	cfg->begin = (void *)ds_get(ds, qual, ds_buffer_base);
-	cfg->top = (void *)ds_get(ds, qual, ds_index);
-	cfg->end = (void *)ds_get(ds, qual, ds_absolute_maximum);
-	cfg->ith = (void *)ds_get(ds, qual, ds_interrupt_threshold);
-}
-
-static void ds_init_ds_trace(struct ds_trace *trace, enum ds_qualifier qual,
-			     void *base, size_t size, size_t ith,
-			     unsigned int flags) {
-	unsigned long buffer, adj;
-
-	/*
-	 * Adjust the buffer address and size to meet alignment
-	 * constraints:
-	 * - buffer is double-word aligned
-	 * - size is multiple of record size
-	 *
-	 * We checked the size at the very beginning; we have enough
-	 * space to do the adjustment.
-	 */
-	buffer = (unsigned long)base;
-
-	adj = ALIGN(buffer, DS_ALIGNMENT) - buffer;
-	buffer += adj;
-	size   -= adj;
-
-	trace->n = size / ds_cfg.sizeof_rec[qual];
-	trace->size = ds_cfg.sizeof_rec[qual];
-
-	size = (trace->n * trace->size);
-
-	trace->begin = (void *)buffer;
-	trace->top = trace->begin;
-	trace->end = (void *)(buffer + size);
-	/*
-	 * The value for 'no threshold' is -1, which will set the
-	 * threshold outside of the buffer, just like we want it.
-	 */
-	ith *= ds_cfg.sizeof_rec[qual];
-	trace->ith = (void *)(buffer + size - ith);
-
-	trace->flags = flags;
-}
-
-
-static int ds_request(struct ds_tracer *tracer, struct ds_trace *trace,
-		      enum ds_qualifier qual, struct task_struct *task,
-		      int cpu, void *base, size_t size, size_t th)
-{
-	struct ds_context *context;
-	int error;
-	size_t req_size;
-
-	error = -EOPNOTSUPP;
-	if (!ds_cfg.sizeof_rec[qual])
-		goto out;
-
-	error = -EINVAL;
-	if (!base)
-		goto out;
-
-	req_size = ds_cfg.sizeof_rec[qual];
-	/* We might need space for alignment adjustments. */
-	if (!IS_ALIGNED((unsigned long)base, DS_ALIGNMENT))
-		req_size += DS_ALIGNMENT;
-
-	error = -EINVAL;
-	if (size < req_size)
-		goto out;
-
-	if (th != (size_t)-1) {
-		th *= ds_cfg.sizeof_rec[qual];
-
-		error = -EINVAL;
-		if (size <= th)
-			goto out;
-	}
-
-	tracer->buffer = base;
-	tracer->size = size;
-
-	error = -ENOMEM;
-	context = ds_get_context(task, cpu);
-	if (!context)
-		goto out;
-	tracer->context = context;
-
-	/*
-	 * Defer any tracer-specific initialization work for the context until
-	 * context ownership has been clarified.
-	 */
-
-	error = 0;
- out:
-	return error;
-}
-
-static struct bts_tracer *ds_request_bts(struct task_struct *task, int cpu,
-					 void *base, size_t size,
-					 bts_ovfl_callback_t ovfl, size_t th,
-					 unsigned int flags)
-{
-	struct bts_tracer *tracer;
-	int error;
-
-	/* Buffer overflow notification is not yet implemented. */
-	error = -EOPNOTSUPP;
-	if (ovfl)
-		goto out;
-
-	error = get_tracer(task);
-	if (error < 0)
-		goto out;
-
-	error = -ENOMEM;
-	tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
-	if (!tracer)
-		goto out_put_tracer;
-	tracer->ovfl = ovfl;
-
-	/* Do some more error checking and acquire a tracing context. */
-	error = ds_request(&tracer->ds, &tracer->trace.ds,
-			   ds_bts, task, cpu, base, size, th);
-	if (error < 0)
-		goto out_tracer;
-
-	/* Claim the bts part of the tracing context we acquired above. */
-	spin_lock_irq(&ds_lock);
-
-	error = -EPERM;
-	if (tracer->ds.context->bts_master)
-		goto out_unlock;
-	tracer->ds.context->bts_master = tracer;
-
-	spin_unlock_irq(&ds_lock);
-
-	/*
-	 * Now that we own the bts part of the context, let's complete the
-	 * initialization for that part.
-	 */
-	ds_init_ds_trace(&tracer->trace.ds, ds_bts, base, size, th, flags);
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
-	ds_install_ds_area(tracer->ds.context);
-
-	tracer->trace.read  = bts_read;
-	tracer->trace.write = bts_write;
-
-	/* Start tracing. */
-	ds_resume_bts(tracer);
-
-	return tracer;
-
- out_unlock:
-	spin_unlock_irq(&ds_lock);
-	ds_put_context(tracer->ds.context);
- out_tracer:
-	kfree(tracer);
- out_put_tracer:
-	put_tracer(task);
- out:
-	return ERR_PTR(error);
-}
-
-struct bts_tracer *ds_request_bts_task(struct task_struct *task,
-				       void *base, size_t size,
-				       bts_ovfl_callback_t ovfl,
-				       size_t th, unsigned int flags)
-{
-	return ds_request_bts(task, 0, base, size, ovfl, th, flags);
-}
-
-struct bts_tracer *ds_request_bts_cpu(int cpu, void *base, size_t size,
-				      bts_ovfl_callback_t ovfl,
-				      size_t th, unsigned int flags)
-{
-	return ds_request_bts(NULL, cpu, base, size, ovfl, th, flags);
-}
-
-static struct pebs_tracer *ds_request_pebs(struct task_struct *task, int cpu,
-					   void *base, size_t size,
-					   pebs_ovfl_callback_t ovfl, size_t th,
-					   unsigned int flags)
-{
-	struct pebs_tracer *tracer;
-	int error;
-
-	/* Buffer overflow notification is not yet implemented. */
-	error = -EOPNOTSUPP;
-	if (ovfl)
-		goto out;
-
-	error = get_tracer(task);
-	if (error < 0)
-		goto out;
-
-	error = -ENOMEM;
-	tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
-	if (!tracer)
-		goto out_put_tracer;
-	tracer->ovfl = ovfl;
-
-	/* Do some more error checking and acquire a tracing context. */
-	error = ds_request(&tracer->ds, &tracer->trace.ds,
-			   ds_pebs, task, cpu, base, size, th);
-	if (error < 0)
-		goto out_tracer;
-
-	/* Claim the pebs part of the tracing context we acquired above. */
-	spin_lock_irq(&ds_lock);
-
-	error = -EPERM;
-	if (tracer->ds.context->pebs_master)
-		goto out_unlock;
-	tracer->ds.context->pebs_master = tracer;
-
-	spin_unlock_irq(&ds_lock);
-
-	/*
-	 * Now that we own the pebs part of the context, let's complete the
-	 * initialization for that part.
-	 */
-	ds_init_ds_trace(&tracer->trace.ds, ds_pebs, base, size, th, flags);
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
-	ds_install_ds_area(tracer->ds.context);
-
-	/* Start tracing. */
-	ds_resume_pebs(tracer);
-
-	return tracer;
-
- out_unlock:
-	spin_unlock_irq(&ds_lock);
-	ds_put_context(tracer->ds.context);
- out_tracer:
-	kfree(tracer);
- out_put_tracer:
-	put_tracer(task);
- out:
-	return ERR_PTR(error);
-}
-
-struct pebs_tracer *ds_request_pebs_task(struct task_struct *task,
-					 void *base, size_t size,
-					 pebs_ovfl_callback_t ovfl,
-					 size_t th, unsigned int flags)
-{
-	return ds_request_pebs(task, 0, base, size, ovfl, th, flags);
-}
-
-struct pebs_tracer *ds_request_pebs_cpu(int cpu, void *base, size_t size,
-					pebs_ovfl_callback_t ovfl,
-					size_t th, unsigned int flags)
-{
-	return ds_request_pebs(NULL, cpu, base, size, ovfl, th, flags);
-}
-
-static void ds_free_bts(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-
-	task = tracer->ds.context->task;
-
-	WARN_ON_ONCE(tracer->ds.context->bts_master != tracer);
-	tracer->ds.context->bts_master = NULL;
-
-	/* Make sure tracing stopped and the tracer is not in use. */
-	if (task && (task != current))
-		wait_task_context_switch(task);
-
-	ds_put_context(tracer->ds.context);
-	put_tracer(task);
-
-	kfree(tracer);
-}
-
-void ds_release_bts(struct bts_tracer *tracer)
-{
-	might_sleep();
-
-	if (!tracer)
-		return;
-
-	ds_suspend_bts(tracer);
-	ds_free_bts(tracer);
-}
-
-int ds_release_bts_noirq(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long irq;
-	int error;
-
-	if (!tracer)
-		return 0;
-
-	task = tracer->ds.context->task;
-
-	local_irq_save(irq);
-
-	error = -EPERM;
-	if (!task &&
-	    (tracer->ds.context->cpu != smp_processor_id()))
-		goto out;
-
-	error = -EPERM;
-	if (task && (task != current))
-		goto out;
-
-	ds_suspend_bts_noirq(tracer);
-	ds_free_bts(tracer);
-
-	error = 0;
- out:
-	local_irq_restore(irq);
-	return error;
-}
-
-static void update_task_debugctlmsr(struct task_struct *task,
-				    unsigned long debugctlmsr)
-{
-	task->thread.debugctlmsr = debugctlmsr;
-
-	get_cpu();
-	if (task == current)
-		update_debugctlmsr(debugctlmsr);
-	put_cpu();
-}
-
-void ds_suspend_bts(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long debugctlmsr;
-	int cpu;
-
-	if (!tracer)
-		return;
-
-	tracer->flags = 0;
-
-	task = tracer->ds.context->task;
-	cpu  = tracer->ds.context->cpu;
-
-	WARN_ON(!task && irqs_disabled());
-
-	debugctlmsr = (task ?
-		       task->thread.debugctlmsr :
-		       get_debugctlmsr_on_cpu(cpu));
-	debugctlmsr &= ~BTS_CONTROL;
-
-	if (task)
-		update_task_debugctlmsr(task, debugctlmsr);
-	else
-		update_debugctlmsr_on_cpu(cpu, debugctlmsr);
-}
-
-int ds_suspend_bts_noirq(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long debugctlmsr, irq;
-	int cpu, error = 0;
-
-	if (!tracer)
-		return 0;
-
-	tracer->flags = 0;
-
-	task = tracer->ds.context->task;
-	cpu  = tracer->ds.context->cpu;
-
-	local_irq_save(irq);
-
-	error = -EPERM;
-	if (!task && (cpu != smp_processor_id()))
-		goto out;
-
-	debugctlmsr = (task ?
-		       task->thread.debugctlmsr :
-		       get_debugctlmsr());
-	debugctlmsr &= ~BTS_CONTROL;
-
-	if (task)
-		update_task_debugctlmsr(task, debugctlmsr);
-	else
-		update_debugctlmsr(debugctlmsr);
-
-	error = 0;
- out:
-	local_irq_restore(irq);
-	return error;
-}
-
-static unsigned long ds_bts_control(struct bts_tracer *tracer)
-{
-	unsigned long control;
-
-	control = ds_cfg.ctl[dsf_bts];
-	if (!(tracer->trace.ds.flags & BTS_KERNEL))
-		control |= ds_cfg.ctl[dsf_bts_kernel];
-	if (!(tracer->trace.ds.flags & BTS_USER))
-		control |= ds_cfg.ctl[dsf_bts_user];
-
-	return control;
-}
-
-void ds_resume_bts(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long debugctlmsr;
-	int cpu;
-
-	if (!tracer)
-		return;
-
-	tracer->flags = tracer->trace.ds.flags;
-
-	task = tracer->ds.context->task;
-	cpu  = tracer->ds.context->cpu;
-
-	WARN_ON(!task && irqs_disabled());
-
-	debugctlmsr = (task ?
-		       task->thread.debugctlmsr :
-		       get_debugctlmsr_on_cpu(cpu));
-	debugctlmsr |= ds_bts_control(tracer);
-
-	if (task)
-		update_task_debugctlmsr(task, debugctlmsr);
-	else
-		update_debugctlmsr_on_cpu(cpu, debugctlmsr);
-}
-
-int ds_resume_bts_noirq(struct bts_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long debugctlmsr, irq;
-	int cpu, error = 0;
-
-	if (!tracer)
-		return 0;
-
-	tracer->flags = tracer->trace.ds.flags;
-
-	task = tracer->ds.context->task;
-	cpu  = tracer->ds.context->cpu;
-
-	local_irq_save(irq);
-
-	error = -EPERM;
-	if (!task && (cpu != smp_processor_id()))
-		goto out;
-
-	debugctlmsr = (task ?
-		       task->thread.debugctlmsr :
-		       get_debugctlmsr());
-	debugctlmsr |= ds_bts_control(tracer);
-
-	if (task)
-		update_task_debugctlmsr(task, debugctlmsr);
-	else
-		update_debugctlmsr(debugctlmsr);
-
-	error = 0;
- out:
-	local_irq_restore(irq);
-	return error;
-}
-
-static void ds_free_pebs(struct pebs_tracer *tracer)
-{
-	struct task_struct *task;
-
-	task = tracer->ds.context->task;
-
-	WARN_ON_ONCE(tracer->ds.context->pebs_master != tracer);
-	tracer->ds.context->pebs_master = NULL;
-
-	ds_put_context(tracer->ds.context);
-	put_tracer(task);
-
-	kfree(tracer);
-}
-
-void ds_release_pebs(struct pebs_tracer *tracer)
-{
-	might_sleep();
-
-	if (!tracer)
-		return;
-
-	ds_suspend_pebs(tracer);
-	ds_free_pebs(tracer);
-}
-
-int ds_release_pebs_noirq(struct pebs_tracer *tracer)
-{
-	struct task_struct *task;
-	unsigned long irq;
-	int error;
-
-	if (!tracer)
-		return 0;
-
-	task = tracer->ds.context->task;
-
-	local_irq_save(irq);
-
-	error = -EPERM;
-	if (!task &&
-	    (tracer->ds.context->cpu != smp_processor_id()))
-		goto out;
-
-	error = -EPERM;
-	if (task && (task != current))
-		goto out;
-
-	ds_suspend_pebs_noirq(tracer);
-	ds_free_pebs(tracer);
-
-	error = 0;
- out:
-	local_irq_restore(irq);
-	return error;
-}
-
-void ds_suspend_pebs(struct pebs_tracer *tracer)
-{
-
-}
-
-int ds_suspend_pebs_noirq(struct pebs_tracer *tracer)
-{
-	return 0;
-}
-
-void ds_resume_pebs(struct pebs_tracer *tracer)
-{
-
-}
-
-int ds_resume_pebs_noirq(struct pebs_tracer *tracer)
-{
-	return 0;
-}
-
-const struct bts_trace *ds_read_bts(struct bts_tracer *tracer)
-{
-	if (!tracer)
-		return NULL;
-
-	ds_read_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
-	return &tracer->trace;
-}
-
-const struct pebs_trace *ds_read_pebs(struct pebs_tracer *tracer)
-{
-	if (!tracer)
-		return NULL;
-
-	ds_read_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
-
-	tracer->trace.counters = ds_cfg.nr_counter_reset;
-	memcpy(tracer->trace.counter_reset,
-	       tracer->ds.context->ds +
-	       (NUM_DS_PTR_FIELDS * ds_cfg.sizeof_ptr_field),
-	       ds_cfg.nr_counter_reset * PEBS_RESET_FIELD_SIZE);
-
-	return &tracer->trace;
-}
-
-int ds_reset_bts(struct bts_tracer *tracer)
-{
-	if (!tracer)
-		return -EINVAL;
-
-	tracer->trace.ds.top = tracer->trace.ds.begin;
-
-	ds_set(tracer->ds.context->ds, ds_bts, ds_index,
-	       (unsigned long)tracer->trace.ds.top);
-
-	return 0;
-}
-
-int ds_reset_pebs(struct pebs_tracer *tracer)
-{
-	if (!tracer)
-		return -EINVAL;
-
-	tracer->trace.ds.top = tracer->trace.ds.begin;
-
-	ds_set(tracer->ds.context->ds, ds_pebs, ds_index,
-	       (unsigned long)tracer->trace.ds.top);
-
-	return 0;
-}
-
-int ds_set_pebs_reset(struct pebs_tracer *tracer,
-		      unsigned int counter, u64 value)
-{
-	if (!tracer)
-		return -EINVAL;
-
-	if (ds_cfg.nr_counter_reset < counter)
-		return -EINVAL;
-
-	*(u64 *)(tracer->ds.context->ds +
-		 (NUM_DS_PTR_FIELDS * ds_cfg.sizeof_ptr_field) +
-		 (counter * PEBS_RESET_FIELD_SIZE)) = value;
-
-	return 0;
-}
-
-static const struct ds_configuration ds_cfg_netburst = {
-	.name = "Netburst",
-	.ctl[dsf_bts]		= (1 << 2) | (1 << 3),
-	.ctl[dsf_bts_kernel]	= (1 << 5),
-	.ctl[dsf_bts_user]	= (1 << 6),
-	.nr_counter_reset	= 1,
-};
-static const struct ds_configuration ds_cfg_pentium_m = {
-	.name = "Pentium M",
-	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
-	.nr_counter_reset	= 1,
-};
-static const struct ds_configuration ds_cfg_core2_atom = {
-	.name = "Core 2/Atom",
-	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
-	.ctl[dsf_bts_kernel]	= (1 << 9),
-	.ctl[dsf_bts_user]	= (1 << 10),
-	.nr_counter_reset	= 1,
-};
-static const struct ds_configuration ds_cfg_core_i7 = {
-	.name = "Core i7",
-	.ctl[dsf_bts]		= (1 << 6) | (1 << 7),
-	.ctl[dsf_bts_kernel]	= (1 << 9),
-	.ctl[dsf_bts_user]	= (1 << 10),
-	.nr_counter_reset	= 4,
-};
-
-static void
-ds_configure(const struct ds_configuration *cfg,
-	     struct cpuinfo_x86 *cpu)
-{
-	unsigned long nr_pebs_fields = 0;
-
-	printk(KERN_INFO "[ds] using %s configuration\n", cfg->name);
-
-#ifdef __i386__
-	nr_pebs_fields = 10;
-#else
-	nr_pebs_fields = 18;
-#endif
-
-	/*
-	 * Starting with version 2, architectural performance
-	 * monitoring supports a format specifier.
-	 */
-	if ((cpuid_eax(0xa) & 0xff) > 1) {
-		unsigned long perf_capabilities, format;
-
-		rdmsrl(MSR_IA32_PERF_CAPABILITIES, perf_capabilities);
-
-		format = (perf_capabilities >> 8) & 0xf;
-
-		switch (format) {
-		case 0:
-			nr_pebs_fields = 18;
-			break;
-		case 1:
-			nr_pebs_fields = 22;
-			break;
-		default:
-			printk(KERN_INFO
-			       "[ds] unknown PEBS format: %lu\n", format);
-			nr_pebs_fields = 0;
-			break;
-		}
-	}
-
-	memset(&ds_cfg, 0, sizeof(ds_cfg));
-	ds_cfg = *cfg;
-
-	ds_cfg.sizeof_ptr_field =
-		(cpu_has(cpu, X86_FEATURE_DTES64) ? 8 : 4);
-
-	ds_cfg.sizeof_rec[ds_bts]  = ds_cfg.sizeof_ptr_field * 3;
-	ds_cfg.sizeof_rec[ds_pebs] = ds_cfg.sizeof_ptr_field * nr_pebs_fields;
-
-	if (!cpu_has(cpu, X86_FEATURE_BTS)) {
-		ds_cfg.sizeof_rec[ds_bts] = 0;
-		printk(KERN_INFO "[ds] bts not available\n");
-	}
-	if (!cpu_has(cpu, X86_FEATURE_PEBS)) {
-		ds_cfg.sizeof_rec[ds_pebs] = 0;
-		printk(KERN_INFO "[ds] pebs not available\n");
-	}
-
-	printk(KERN_INFO "[ds] sizes: address: %u bit, ",
-	       8 * ds_cfg.sizeof_ptr_field);
-	printk("bts/pebs record: %u/%u bytes\n",
-	       ds_cfg.sizeof_rec[ds_bts], ds_cfg.sizeof_rec[ds_pebs]);
-
-	WARN_ON_ONCE(MAX_PEBS_COUNTERS < ds_cfg.nr_counter_reset);
-}
-
-void __cpuinit ds_init_intel(struct cpuinfo_x86 *c)
-{
-	/* Only configure the first cpu. Others are identical. */
-	if (ds_cfg.name)
-		return;
-
-	switch (c->x86) {
-	case 0x6:
-		switch (c->x86_model) {
-		case 0x9:
-		case 0xd: /* Pentium M */
-			ds_configure(&ds_cfg_pentium_m, c);
-			break;
-		case 0xf:
-		case 0x17: /* Core2 */
-		case 0x1c: /* Atom */
-			ds_configure(&ds_cfg_core2_atom, c);
-			break;
-		case 0x1a: /* Core i7 */
-			ds_configure(&ds_cfg_core_i7, c);
-			break;
-		default:
-			/* Sorry, don't know about them. */
-			break;
-		}
-		break;
-	case 0xf:
-		switch (c->x86_model) {
-		case 0x0:
-		case 0x1:
-		case 0x2: /* Netburst */
-			ds_configure(&ds_cfg_netburst, c);
-			break;
-		default:
-			/* Sorry, don't know about them. */
-			break;
-		}
-		break;
-	default:
-		/* Sorry, don't know about them. */
-		break;
-	}
-}
-
-static inline void ds_take_timestamp(struct ds_context *context,
-				     enum bts_qualifier qualifier,
-				     struct task_struct *task)
-{
-	struct bts_tracer *tracer = context->bts_master;
-	struct bts_struct ts;
-
-	/* Prevent compilers from reading the tracer pointer twice. */
-	barrier();
-
-	if (!tracer || !(tracer->flags & BTS_TIMESTAMPS))
-		return;
-
-	memset(&ts, 0, sizeof(ts));
-	ts.qualifier		= qualifier;
-	ts.variant.event.clock	= trace_clock_global();
-	ts.variant.event.pid	= task->pid;
-
-	bts_write(tracer, &ts);
-}
-
-/*
- * Change the DS configuration from tracing prev to tracing next.
- */
-void ds_switch_to(struct task_struct *prev, struct task_struct *next)
-{
-	struct ds_context *prev_ctx	= prev->thread.ds_ctx;
-	struct ds_context *next_ctx	= next->thread.ds_ctx;
-	unsigned long debugctlmsr	= next->thread.debugctlmsr;
-
-	/* Make sure all data is read before we start. */
-	barrier();
-
-	if (prev_ctx) {
-		update_debugctlmsr(0);
-
-		ds_take_timestamp(prev_ctx, bts_task_departs, prev);
-	}
-
-	if (next_ctx) {
-		ds_take_timestamp(next_ctx, bts_task_arrives, next);
-
-		wrmsrl(MSR_IA32_DS_AREA, (unsigned long)next_ctx->ds);
-	}
-
-	update_debugctlmsr(debugctlmsr);
-}
-
-static __init int ds_selftest(void)
-{
-	if (ds_cfg.sizeof_rec[ds_bts]) {
-		int error;
-
-		error = ds_selftest_bts();
-		if (error) {
-			WARN(1, "[ds] selftest failed. disabling bts.\n");
-			ds_cfg.sizeof_rec[ds_bts] = 0;
-		}
-	}
-
-	if (ds_cfg.sizeof_rec[ds_pebs]) {
-		int error;
-
-		error = ds_selftest_pebs();
-		if (error) {
-			WARN(1, "[ds] selftest failed. disabling pebs.\n");
-			ds_cfg.sizeof_rec[ds_pebs] = 0;
-		}
-	}
-
-	return 0;
-}
-device_initcall(ds_selftest);
diff --git a/arch/x86/kernel/ds_selftest.c b/arch/x86/kernel/ds_selftest.c
deleted file mode 100644
index 6bc7c19..0000000
--- a/arch/x86/kernel/ds_selftest.c
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * Debug Store support - selftest
- *
- *
- * Copyright (C) 2009 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2009
- */
-
-#include "ds_selftest.h"
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/smp.h>
-#include <linux/cpu.h>
-
-#include <asm/ds.h>
-
-
-#define BUFFER_SIZE		521	/* Intentionally chose an odd size. */
-#define SMALL_BUFFER_SIZE	24	/* A single bts entry. */
-
-struct ds_selftest_bts_conf {
-	struct bts_tracer *tracer;
-	int error;
-	int (*suspend)(struct bts_tracer *);
-	int (*resume)(struct bts_tracer *);
-};
-
-static int ds_selftest_bts_consistency(const struct bts_trace *trace)
-{
-	int error = 0;
-
-	if (!trace) {
-		printk(KERN_CONT "failed to access trace...");
-		/* Bail out. Other tests are pointless. */
-		return -1;
-	}
-
-	if (!trace->read) {
-		printk(KERN_CONT "bts read not available...");
-		error = -1;
-	}
-
-	/* Do some sanity checks on the trace configuration. */
-	if (!trace->ds.n) {
-		printk(KERN_CONT "empty bts buffer...");
-		error = -1;
-	}
-	if (!trace->ds.size) {
-		printk(KERN_CONT "bad bts trace setup...");
-		error = -1;
-	}
-	if (trace->ds.end !=
-	    (char *)trace->ds.begin + (trace->ds.n * trace->ds.size)) {
-		printk(KERN_CONT "bad bts buffer setup...");
-		error = -1;
-	}
-	/*
-	 * We allow top in [begin; end], since its not clear when the
-	 * overflow adjustment happens: after the increment or before the
-	 * write.
-	 */
-	if ((trace->ds.top < trace->ds.begin) ||
-	    (trace->ds.end < trace->ds.top)) {
-		printk(KERN_CONT "bts top out of bounds...");
-		error = -1;
-	}
-
-	return error;
-}
-
-static int ds_selftest_bts_read(struct bts_tracer *tracer,
-				const struct bts_trace *trace,
-				const void *from, const void *to)
-{
-	const unsigned char *at;
-
-	/*
-	 * Check a few things which do not belong to this test.
-	 * They should be covered by other tests.
-	 */
-	if (!trace)
-		return -1;
-
-	if (!trace->read)
-		return -1;
-
-	if (to < from)
-		return -1;
-
-	if (from < trace->ds.begin)
-		return -1;
-
-	if (trace->ds.end < to)
-		return -1;
-
-	if (!trace->ds.size)
-		return -1;
-
-	/* Now to the test itself. */
-	for (at = from; (void *)at < to; at += trace->ds.size) {
-		struct bts_struct bts;
-		unsigned long index;
-		int error;
-
-		if (((void *)at - trace->ds.begin) % trace->ds.size) {
-			printk(KERN_CONT
-			       "read from non-integer index...");
-			return -1;
-		}
-		index = ((void *)at - trace->ds.begin) / trace->ds.size;
-
-		memset(&bts, 0, sizeof(bts));
-		error = trace->read(tracer, at, &bts);
-		if (error < 0) {
-			printk(KERN_CONT
-			       "error reading bts trace at [%lu] (0x%p)...",
-			       index, at);
-			return error;
-		}
-
-		switch (bts.qualifier) {
-		case BTS_BRANCH:
-			break;
-		default:
-			printk(KERN_CONT
-			       "unexpected bts entry %llu at [%lu] (0x%p)...",
-			       bts.qualifier, index, at);
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-static void ds_selftest_bts_cpu(void *arg)
-{
-	struct ds_selftest_bts_conf *conf = arg;
-	const struct bts_trace *trace;
-	void *top;
-
-	if (IS_ERR(conf->tracer)) {
-		conf->error = PTR_ERR(conf->tracer);
-		conf->tracer = NULL;
-
-		printk(KERN_CONT
-		       "initialization failed (err: %d)...", conf->error);
-		return;
-	}
-
-	/* We should meanwhile have enough trace. */
-	conf->error = conf->suspend(conf->tracer);
-	if (conf->error < 0)
-		return;
-
-	/* Let's see if we can access the trace. */
-	trace = ds_read_bts(conf->tracer);
-
-	conf->error = ds_selftest_bts_consistency(trace);
-	if (conf->error < 0)
-		return;
-
-	/* If everything went well, we should have a few trace entries. */
-	if (trace->ds.top == trace->ds.begin) {
-		/*
-		 * It is possible but highly unlikely that we got a
-		 * buffer overflow and end up at exactly the same
-		 * position we started from.
-		 * Let's issue a warning, but continue.
-		 */
-		printk(KERN_CONT "no trace/overflow...");
-	}
-
-	/* Let's try to read the trace we collected. */
-	conf->error =
-		ds_selftest_bts_read(conf->tracer, trace,
-				     trace->ds.begin, trace->ds.top);
-	if (conf->error < 0)
-		return;
-
-	/*
-	 * Let's read the trace again.
-	 * Since we suspended tracing, we should get the same result.
-	 */
-	top = trace->ds.top;
-
-	trace = ds_read_bts(conf->tracer);
-	conf->error = ds_selftest_bts_consistency(trace);
-	if (conf->error < 0)
-		return;
-
-	if (top != trace->ds.top) {
-		printk(KERN_CONT "suspend not working...");
-		conf->error = -1;
-		return;
-	}
-
-	/* Let's collect some more trace - see if resume is working. */
-	conf->error = conf->resume(conf->tracer);
-	if (conf->error < 0)
-		return;
-
-	conf->error = conf->suspend(conf->tracer);
-	if (conf->error < 0)
-		return;
-
-	trace = ds_read_bts(conf->tracer);
-
-	conf->error = ds_selftest_bts_consistency(trace);
-	if (conf->error < 0)
-		return;
-
-	if (trace->ds.top == top) {
-		/*
-		 * It is possible but highly unlikely that we got a
-		 * buffer overflow and end up at exactly the same
-		 * position we started from.
-		 * Let's issue a warning and check the full trace.
-		 */
-		printk(KERN_CONT
-		       "no resume progress/overflow...");
-
-		conf->error =
-			ds_selftest_bts_read(conf->tracer, trace,
-					     trace->ds.begin, trace->ds.end);
-	} else if (trace->ds.top < top) {
-		/*
-		 * We had a buffer overflow - the entire buffer should
-		 * contain trace records.
-		 */
-		conf->error =
-			ds_selftest_bts_read(conf->tracer, trace,
-					     trace->ds.begin, trace->ds.end);
-	} else {
-		/*
-		 * It is quite likely that the buffer did not overflow.
-		 * Let's just check the delta trace.
-		 */
-		conf->error =
-			ds_selftest_bts_read(conf->tracer, trace, top,
-					     trace->ds.top);
-	}
-	if (conf->error < 0)
-		return;
-
-	conf->error = 0;
-}
-
-static int ds_suspend_bts_wrap(struct bts_tracer *tracer)
-{
-	ds_suspend_bts(tracer);
-	return 0;
-}
-
-static int ds_resume_bts_wrap(struct bts_tracer *tracer)
-{
-	ds_resume_bts(tracer);
-	return 0;
-}
-
-static void ds_release_bts_noirq_wrap(void *tracer)
-{
-	(void)ds_release_bts_noirq(tracer);
-}
-
-static int ds_selftest_bts_bad_release_noirq(int cpu,
-					     struct bts_tracer *tracer)
-{
-	int error = -EPERM;
-
-	/* Try to release the tracer on the wrong cpu. */
-	get_cpu();
-	if (cpu != smp_processor_id()) {
-		error = ds_release_bts_noirq(tracer);
-		if (error != -EPERM)
-			printk(KERN_CONT "release on wrong cpu...");
-	}
-	put_cpu();
-
-	return error ? 0 : -1;
-}
-
-static int ds_selftest_bts_bad_request_cpu(int cpu, void *buffer)
-{
-	struct bts_tracer *tracer;
-	int error;
-
-	/* Try to request cpu tracing while task tracing is active. */
-	tracer = ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE, NULL,
-				    (size_t)-1, BTS_KERNEL);
-	error = PTR_ERR(tracer);
-	if (!IS_ERR(tracer)) {
-		ds_release_bts(tracer);
-		error = 0;
-	}
-
-	if (error != -EPERM)
-		printk(KERN_CONT "cpu/task tracing overlap...");
-
-	return error ? 0 : -1;
-}
-
-static int ds_selftest_bts_bad_request_task(void *buffer)
-{
-	struct bts_tracer *tracer;
-	int error;
-
-	/* Try to request cpu tracing while task tracing is active. */
-	tracer = ds_request_bts_task(current, buffer, BUFFER_SIZE, NULL,
-				    (size_t)-1, BTS_KERNEL);
-	error = PTR_ERR(tracer);
-	if (!IS_ERR(tracer)) {
-		error = 0;
-		ds_release_bts(tracer);
-	}
-
-	if (error != -EPERM)
-		printk(KERN_CONT "task/cpu tracing overlap...");
-
-	return error ? 0 : -1;
-}
-
-int ds_selftest_bts(void)
-{
-	struct ds_selftest_bts_conf conf;
-	unsigned char buffer[BUFFER_SIZE], *small_buffer;
-	unsigned long irq;
-	int cpu;
-
-	printk(KERN_INFO "[ds] bts selftest...");
-	conf.error = 0;
-
-	small_buffer = (unsigned char *)ALIGN((unsigned long)buffer, 8) + 8;
-
-	get_online_cpus();
-	for_each_online_cpu(cpu) {
-		conf.suspend = ds_suspend_bts_wrap;
-		conf.resume = ds_resume_bts_wrap;
-		conf.tracer =
-			ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE,
-					   NULL, (size_t)-1, BTS_KERNEL);
-		ds_selftest_bts_cpu(&conf);
-		if (conf.error >= 0)
-			conf.error = ds_selftest_bts_bad_request_task(buffer);
-		ds_release_bts(conf.tracer);
-		if (conf.error < 0)
-			goto out;
-
-		conf.suspend = ds_suspend_bts_noirq;
-		conf.resume = ds_resume_bts_noirq;
-		conf.tracer =
-			ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE,
-					   NULL, (size_t)-1, BTS_KERNEL);
-		smp_call_function_single(cpu, ds_selftest_bts_cpu, &conf, 1);
-		if (conf.error >= 0) {
-			conf.error =
-				ds_selftest_bts_bad_release_noirq(cpu,
-								  conf.tracer);
-			/* We must not release the tracer twice. */
-			if (conf.error < 0)
-				conf.tracer = NULL;
-		}
-		if (conf.error >= 0)
-			conf.error = ds_selftest_bts_bad_request_task(buffer);
-		smp_call_function_single(cpu, ds_release_bts_noirq_wrap,
-					 conf.tracer, 1);
-		if (conf.error < 0)
-			goto out;
-	}
-
-	conf.suspend = ds_suspend_bts_wrap;
-	conf.resume = ds_resume_bts_wrap;
-	conf.tracer =
-		ds_request_bts_task(current, buffer, BUFFER_SIZE,
-				    NULL, (size_t)-1, BTS_KERNEL);
-	ds_selftest_bts_cpu(&conf);
-	if (conf.error >= 0)
-		conf.error = ds_selftest_bts_bad_request_cpu(0, buffer);
-	ds_release_bts(conf.tracer);
-	if (conf.error < 0)
-		goto out;
-
-	conf.suspend = ds_suspend_bts_noirq;
-	conf.resume = ds_resume_bts_noirq;
-	conf.tracer =
-		ds_request_bts_task(current, small_buffer, SMALL_BUFFER_SIZE,
-				   NULL, (size_t)-1, BTS_KERNEL);
-	local_irq_save(irq);
-	ds_selftest_bts_cpu(&conf);
-	if (conf.error >= 0)
-		conf.error = ds_selftest_bts_bad_request_cpu(0, buffer);
-	ds_release_bts_noirq(conf.tracer);
-	local_irq_restore(irq);
-	if (conf.error < 0)
-		goto out;
-
-	conf.error = 0;
- out:
-	put_online_cpus();
-	printk(KERN_CONT "%s.\n", (conf.error ? "failed" : "passed"));
-
-	return conf.error;
-}
-
-int ds_selftest_pebs(void)
-{
-	return 0;
-}
diff --git a/arch/x86/kernel/ds_selftest.h b/arch/x86/kernel/ds_selftest.h
deleted file mode 100644
index 2ba8745..0000000
--- a/arch/x86/kernel/ds_selftest.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Debug Store support - selftest
- *
- *
- * Copyright (C) 2009 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2009
- */
-
-#ifdef CONFIG_X86_DS_SELFTEST
-extern int ds_selftest_bts(void);
-extern int ds_selftest_pebs(void);
-#else
-static inline int ds_selftest_bts(void) { return 0; }
-static inline int ds_selftest_pebs(void) { return 0; }
-#endif
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 6d81755..c89a386 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -224,11 +224,6 @@ unsigned __kprobes long oops_begin(void)
 	int cpu;
 	unsigned long flags;
 
-	/* notify the hw-branch tracer so it may disable tracing and
-	   add the last trace to the trace buffer -
-	   the earlier this happens, the more useful the trace. */
-	trace_hw_branch_oops();
-
 	oops_enter();
 
 	/* racy, but better than risking deadlock. */
diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h
index 4fd1420..e1a93be 100644
--- a/arch/x86/kernel/dumpstack.h
+++ b/arch/x86/kernel/dumpstack.h
@@ -14,6 +14,8 @@
 #define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
 #endif
 
+#include <linux/uaccess.h>
+
 extern void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp, char *log_lvl);
@@ -29,4 +31,26 @@ struct stack_frame {
 	struct stack_frame *next_frame;
 	unsigned long return_address;
 };
+
+struct stack_frame_ia32 {
+    u32 next_frame;
+    u32 return_address;
+};
+
+static inline unsigned long rewind_frame_pointer(int n)
+{
+	struct stack_frame *frame;
+
+	get_bp(frame);
+
+#ifdef CONFIG_FRAME_POINTER
+	while (n--) {
+		if (probe_kernel_address(&frame->next_frame, frame))
+			break;
+	}
 #endif
+
+	return (unsigned long)frame;
+}
+
+#endif /* DUMPSTACK_H */
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index ae775ca..11540a1 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -18,11 +18,6 @@
 
 #include "dumpstack.h"
 
-/* Just a stub for now */
-int x86_is_stack_id(int id, char *name)
-{
-	return 0;
-}
 
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 0ad9597..272c9f1 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -33,11 +33,6 @@ static char x86_stack_ids[][8] = {
 #endif
 };
 
-int x86_is_stack_id(int id, char *name)
-{
-	return x86_stack_ids[id - 1] == name;
-}
-
 static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 					 unsigned *usedp, char **idp)
 {
@@ -125,9 +120,15 @@ fixup_bp_irq_link(unsigned long bp, unsigned long *stack,
 {
 #ifdef CONFIG_FRAME_POINTER
 	struct stack_frame *frame = (struct stack_frame *)bp;
+	unsigned long next;
 
-	if (!in_irq_stack(stack, irq_stack, irq_stack_end))
-		return (unsigned long)frame->next_frame;
+	if (!in_irq_stack(stack, irq_stack, irq_stack_end)) {
+		if (!probe_kernel_address(&frame->next_frame, next))
+			return next;
+		else
+			WARN_ONCE(1, "Perf: bad frame pointer = %p in "
+				  "callchain\n", &frame->next_frame);
+	}
 #endif
 	return bp;
 }
@@ -207,7 +208,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			if (in_irq_stack(stack, irq_stack, irq_stack_end)) {
 				if (ops->stack(data, "IRQ") < 0)
 					break;
-				bp = print_context_stack(tinfo, stack, bp,
+				bp = ops->walk_stack(tinfo, stack, bp,
 					ops, data, irq_stack_end, &graph);
 				/*
 				 * We link to the next stack (which would be
@@ -228,7 +229,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	/*
 	 * This handles the process stack:
 	 */
-	bp = print_context_stack(tinfo, stack, bp, ops, data, NULL, &graph);
+	bp = ops->walk_stack(tinfo, stack, bp, ops, data, NULL, &graph);
 	put_cpu();
 }
 EXPORT_SYMBOL(dump_trace);
@@ -291,6 +292,7 @@ void show_registers(struct pt_regs *regs)
 
 	sp = regs->sp;
 	printk("CPU %d ", cpu);
+	print_modules();
 	__show_regs(regs, 1);
 	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
 		cur->comm, cur->pid, task_thread_info(cur), cur);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index a1a7876..0d6fc71 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -12,21 +12,13 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/suspend.h>
 #include <linux/firmware-map.h>
 
-#include <asm/pgtable.h>
-#include <asm/page.h>
 #include <asm/e820.h>
 #include <asm/proto.h>
 #include <asm/setup.h>
-#include <asm/trampoline.h>
 
 /*
  * The e820 map is the map that gets modified e.g. with command line parameters
@@ -517,31 +509,55 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
 			     int checktype)
 {
 	int i;
+	u64 end;
 	u64 real_removed_size = 0;
 
 	if (size > (ULLONG_MAX - start))
 		size = ULLONG_MAX - start;
 
+	end = start + size;
+	printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
+		       (unsigned long long) start,
+		       (unsigned long long) end);
+	if (checktype)
+		e820_print_type(old_type);
+	printk(KERN_CONT "\n");
+
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
 		u64 final_start, final_end;
+		u64 ei_end;
 
 		if (checktype && ei->type != old_type)
 			continue;
+
+		ei_end = ei->addr + ei->size;
 		/* totally covered? */
-		if (ei->addr >= start &&
-		    (ei->addr + ei->size) <= (start + size)) {
+		if (ei->addr >= start && ei_end <= end) {
 			real_removed_size += ei->size;
 			memset(ei, 0, sizeof(struct e820entry));
 			continue;
 		}
+
+		/* new range is totally covered? */
+		if (ei->addr < start && ei_end > end) {
+			e820_add_region(end, ei_end - end, ei->type);
+			ei->size = start - ei->addr;
+			real_removed_size += size;
+			continue;
+		}
+
 		/* partially covered */
 		final_start = max(start, ei->addr);
-		final_end = min(start + size, ei->addr + ei->size);
+		final_end = min(end, ei_end);
 		if (final_start >= final_end)
 			continue;
 		real_removed_size += final_end - final_start;
 
+		/*
+		 * left range could be head or tail, so need to update
+		 * size at first.
+		 */
 		ei->size -= final_end - final_start;
 		if (ei->addr < final_start)
 			continue;
@@ -713,7 +729,7 @@ static int __init e820_mark_nvs_memory(void)
 		struct e820entry *ei = &e820.map[i];
 
 		if (ei->type == E820_NVS)
-			hibernate_nvs_register(ei->addr, ei->size);
+			suspend_nvs_register(ei->addr, ei->size);
 	}
 
 	return 0;
@@ -722,319 +738,44 @@ core_initcall(e820_mark_nvs_memory);
 #endif
 
 /*
- * Early reserved memory areas.
- */
-#define MAX_EARLY_RES 32
-
-struct early_res {
-	u64 start, end;
-	char name[16];
-	char overlap_ok;
-};
-static struct early_res early_res[MAX_EARLY_RES] __initdata = {
-	{ 0, PAGE_SIZE, "BIOS data page", 1 },	/* BIOS data page */
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_TRAMPOLINE)
-	/*
-	 * But first pinch a few for the stack/trampoline stuff
-	 * FIXME: Don't need the extra page at 4K, but need to fix
-	 * trampoline before removing it. (see the GDT stuff)
-	 */
-	{ PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE", 1 },
-#endif
-
-	{}
-};
-
-static int __init find_overlapped_early(u64 start, u64 end)
-{
-	int i;
-	struct early_res *r;
-
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
-		if (end > r->start && start < r->end)
-			break;
-	}
-
-	return i;
-}
-
-/*
- * Drop the i-th range from the early reservation map,
- * by copying any higher ranges down one over it, and
- * clearing what had been the last slot.
- */
-static void __init drop_range(int i)
-{
-	int j;
-
-	for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
-		;
-
-	memmove(&early_res[i], &early_res[i + 1],
-	       (j - 1 - i) * sizeof(struct early_res));
-
-	early_res[j - 1].end = 0;
-}
-
-/*
- * Split any existing ranges that:
- *  1) are marked 'overlap_ok', and
- *  2) overlap with the stated range [start, end)
- * into whatever portion (if any) of the existing range is entirely
- * below or entirely above the stated range.  Drop the portion
- * of the existing range that overlaps with the stated range,
- * which will allow the caller of this routine to then add that
- * stated range without conflicting with any existing range.
+ * Find a free area with specified alignment in a specific range.
  */
-static void __init drop_overlaps_that_are_ok(u64 start, u64 end)
+u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
 {
 	int i;
-	struct early_res *r;
-	u64 lower_start, lower_end;
-	u64 upper_start, upper_end;
-	char name[16];
 
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		r = &early_res[i];
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 addr;
+		u64 ei_start, ei_last;
 
-		/* Continue past non-overlapping ranges */
-		if (end <= r->start || start >= r->end)
+		if (ei->type != E820_RAM)
 			continue;
 
-		/*
-		 * Leave non-ok overlaps as is; let caller
-		 * panic "Overlapping early reservations"
-		 * when it hits this overlap.
-		 */
-		if (!r->overlap_ok)
-			return;
-
-		/*
-		 * We have an ok overlap.  We will drop it from the early
-		 * reservation map, and add back in any non-overlapping
-		 * portions (lower or upper) as separate, overlap_ok,
-		 * non-overlapping ranges.
-		 */
-
-		/* 1. Note any non-overlapping (lower or upper) ranges. */
-		strncpy(name, r->name, sizeof(name) - 1);
-
-		lower_start = lower_end = 0;
-		upper_start = upper_end = 0;
-		if (r->start < start) {
-		 	lower_start = r->start;
-			lower_end = start;
-		}
-		if (r->end > end) {
-			upper_start = end;
-			upper_end = r->end;
-		}
-
-		/* 2. Drop the original ok overlapping range */
-		drop_range(i);
-
-		i--;		/* resume for-loop on copied down entry */
-
-		/* 3. Add back in any non-overlapping ranges. */
-		if (lower_end)
-			reserve_early_overlap_ok(lower_start, lower_end, name);
-		if (upper_end)
-			reserve_early_overlap_ok(upper_start, upper_end, name);
-	}
-}
-
-static void __init __reserve_early(u64 start, u64 end, char *name,
-						int overlap_ok)
-{
-	int i;
-	struct early_res *r;
-
-	i = find_overlapped_early(start, end);
-	if (i >= MAX_EARLY_RES)
-		panic("Too many early reservations");
-	r = &early_res[i];
-	if (r->end)
-		panic("Overlapping early reservations "
-		      "%llx-%llx %s to %llx-%llx %s\n",
-		      start, end - 1, name?name:"", r->start,
-		      r->end - 1, r->name);
-	r->start = start;
-	r->end = end;
-	r->overlap_ok = overlap_ok;
-	if (name)
-		strncpy(r->name, name, sizeof(r->name) - 1);
-}
-
-/*
- * A few early reservtations come here.
- *
- * The 'overlap_ok' in the name of this routine does -not- mean it
- * is ok for these reservations to overlap an earlier reservation.
- * Rather it means that it is ok for subsequent reservations to
- * overlap this one.
- *
- * Use this entry point to reserve early ranges when you are doing
- * so out of "Paranoia", reserving perhaps more memory than you need,
- * just in case, and don't mind a subsequent overlapping reservation
- * that is known to be needed.
- *
- * The drop_overlaps_that_are_ok() call here isn't really needed.
- * It would be needed if we had two colliding 'overlap_ok'
- * reservations, so that the second such would not panic on the
- * overlap with the first.  We don't have any such as of this
- * writing, but might as well tolerate such if it happens in
- * the future.
- */
-void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)
-{
-	drop_overlaps_that_are_ok(start, end);
-	__reserve_early(start, end, name, 1);
-}
-
-/*
- * Most early reservations come here.
- *
- * We first have drop_overlaps_that_are_ok() drop any pre-existing
- * 'overlap_ok' ranges, so that we can then reserve this memory
- * range without risk of panic'ing on an overlapping overlap_ok
- * early reservation.
- */
-void __init reserve_early(u64 start, u64 end, char *name)
-{
-	if (start >= end)
-		return;
-
-	drop_overlaps_that_are_ok(start, end);
-	__reserve_early(start, end, name, 0);
-}
-
-void __init free_early(u64 start, u64 end)
-{
-	struct early_res *r;
-	int i;
-
-	i = find_overlapped_early(start, end);
-	r = &early_res[i];
-	if (i >= MAX_EARLY_RES || r->end != end || r->start != start)
-		panic("free_early on not reserved area: %llx-%llx!",
-			 start, end - 1);
-
-	drop_range(i);
-}
-
-void __init early_res_to_bootmem(u64 start, u64 end)
-{
-	int i, count;
-	u64 final_start, final_end;
-
-	count  = 0;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
-		count++;
-
-	printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
-			 count, start, end);
-	for (i = 0; i < count; i++) {
-		struct early_res *r = &early_res[i];
-		printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
-			r->start, r->end, r->name);
-		final_start = max(start, r->start);
-		final_end = min(end, r->end);
-		if (final_start >= final_end) {
-			printk(KERN_CONT "\n");
-			continue;
-		}
-		printk(KERN_CONT " ==> [%010llx - %010llx]\n",
-			final_start, final_end);
-		reserve_bootmem_generic(final_start, final_end - final_start,
-				BOOTMEM_DEFAULT);
-	}
-}
+		ei_last = ei->addr + ei->size;
+		ei_start = ei->addr;
+		addr = find_early_area(ei_start, ei_last, start, end,
+					 size, align);
 
-/* Check for already reserved areas */
-static inline int __init bad_addr(u64 *addrp, u64 size, u64 align)
-{
-	int i;
-	u64 addr = *addrp;
-	int changed = 0;
-	struct early_res *r;
-again:
-	i = find_overlapped_early(addr, addr + size);
-	r = &early_res[i];
-	if (i < MAX_EARLY_RES && r->end) {
-		*addrp = addr = round_up(r->end, align);
-		changed = 1;
-		goto again;
+		if (addr != -1ULL)
+			return addr;
 	}
-	return changed;
+	return -1ULL;
 }
 
-/* Check for already reserved areas */
-static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)
+u64 __init find_fw_memmap_area(u64 start, u64 end, u64 size, u64 align)
 {
-	int i;
-	u64 addr = *addrp, last;
-	u64 size = *sizep;
-	int changed = 0;
-again:
-	last = addr + size;
-	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
-		struct early_res *r = &early_res[i];
-		if (last > r->start && addr < r->start) {
-			size = r->start - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last > r->end && addr < r->end) {
-			addr = round_up(r->end, align);
-			size = last - addr;
-			changed = 1;
-			goto again;
-		}
-		if (last <= r->end && addr >= r->start) {
-			(*sizep)++;
-			return 0;
-		}
-	}
-	if (changed) {
-		*addrp = addr;
-		*sizep = size;
-	}
-	return changed;
+	return find_e820_area(start, end, size, align);
 }
 
-/*
- * Find a free area with specified alignment in a specific range.
- */
-u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
+u64 __init get_max_mapped(void)
 {
-	int i;
+	u64 end = max_pfn_mapped;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		u64 addr, last;
-		u64 ei_last;
+	end <<= PAGE_SHIFT;
 
-		if (ei->type != E820_RAM)
-			continue;
-		addr = round_up(ei->addr, align);
-		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
-			;
-		last = addr + size;
-		if (last > ei_last)
-			continue;
-		if (last > end)
-			continue;
-		return addr;
-	}
-	return -1ULL;
+	return end;
 }
-
 /*
  * Find next free range after *start
  */
@@ -1044,25 +785,19 @@ u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)
 
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
-		u64 addr, last;
-		u64 ei_last;
+		u64 addr;
+		u64 ei_start, ei_last;
 
 		if (ei->type != E820_RAM)
 			continue;
-		addr = round_up(ei->addr, align);
+
 		ei_last = ei->addr + ei->size;
-		if (addr < start)
-			addr = round_up(start, align);
-		if (addr >= ei_last)
-			continue;
-		*sizep = ei_last - addr;
-		while (bad_addr_size(&addr, sizep, align) &&
-			addr + *sizep <= ei_last)
-			;
-		last = addr + *sizep;
-		if (last > ei_last)
-			continue;
-		return addr;
+		ei_start = ei->addr;
+		addr = find_early_area_size(ei_start, ei_last, start,
+					 sizep, align);
+
+		if (addr != -1ULL)
+			return addr;
 	}
 
 	return -1ULL;
@@ -1421,6 +1156,8 @@ void __init e820_reserve_resources_late(void)
 			end = MAX_RESOURCE_SIZE;
 		if (start >= end)
 			continue;
+		printk(KERN_DEBUG "reserve RAM buffer: %016llx - %016llx ",
+			       start, end);
 		reserve_region_with_split(&iomem_resource, start, end,
 					  "RAM buffer");
 	}
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index ebdb85c..e5cc7e8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
 #include <asm/apic.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/hpet.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -191,6 +192,21 @@ static void __init ati_bugs_contd(int num, int slot, int func)
 }
 #endif
 
+/*
+ * Force the read back of the CMP register in hpet_next_event()
+ * to work around the problem that the CMP register write seems to be
+ * delayed. See hpet_next_event() for details.
+ *
+ * We do this on all SMBUS incarnations for now until we have more
+ * information about the affected chipsets.
+ */
+static void __init ati_hpet_bugs(int num, int slot, int func)
+{
+#ifdef CONFIG_HPET_TIMER
+	hpet_readback_cmp = 1;
+#endif
+}
+
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -220,6 +236,8 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
 	{}
 };
 
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index b9c830c..fa99bae 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -41,6 +41,14 @@ static void early_vga_write(struct console *con, const char *str, unsigned n)
 				writew(0x720, VGABASE + 2*(max_xpos*j + i));
 			current_ypos = max_ypos-1;
 		}
+#ifdef CONFIG_KGDB_KDB
+		if (c == '\b') {
+			if (current_xpos > 0)
+				current_xpos--;
+		} else if (c == '\r') {
+			current_xpos = 0;
+		} else
+#endif
 		if (c == '\n') {
 			current_xpos = 0;
 			current_ypos++;
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index cdcfb12..c2fa9b8 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -362,7 +362,7 @@ void __init efi_init(void)
 		printk(KERN_ERR PFX "Could not map the firmware vendor!\n");
 	early_iounmap(tmp, 2);
 
-	printk(KERN_INFO "EFI v%u.%.02u by %s \n",
+	printk(KERN_INFO "EFI v%u.%.02u by %s\n",
 	       efi.systab->hdr.revision >> 16,
 	       efi.systab->hdr.revision & 0xffff, vendor);
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 44a8e0d..cd49141 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -53,6 +53,7 @@
 #include <asm/processor-flags.h>
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
+#include <asm/cpufeature.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
@@ -905,7 +906,25 @@ ENTRY(simd_coprocessor_error)
 	RING0_INT_FRAME
 	pushl $0
 	CFI_ADJUST_CFA_OFFSET 4
+#ifdef CONFIG_X86_INVD_BUG
+	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
+661:	pushl $do_general_protection
+662:
+.section .altinstructions,"a"
+	.balign 4
+	.long 661b
+	.long 663f
+	.byte X86_FEATURE_XMM
+	.byte 662b-661b
+	.byte 664f-663f
+.previous
+.section .altinstr_replacement,"ax"
+663:	pushl $do_simd_coprocessor_error
+664:
+.previous
+#else
 	pushl $do_simd_coprocessor_error
+#endif
 	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
 	CFI_ENDPROC
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0697ff1..4db7c4d 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -571,8 +571,8 @@ auditsys:
 	 * masked off.
 	 */
 sysret_audit:
-	movq %rax,%rsi		/* second arg, syscall return value */
-	cmpq $0,%rax		/* is it < 0? */
+	movq RAX-ARGOFFSET(%rsp),%rsi	/* second arg, syscall return value */
+	cmpq $0,%rsi		/* is it < 0? */
 	setl %al		/* 1 if so, 0 if not */
 	movzbl %al,%edi		/* zero-extend that into %edi */
 	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 3096892..cd37469 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -30,14 +30,32 @@
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
+/*
+ * modifying_code is set to notify NMIs that they need to use
+ * memory barriers when entering or exiting. But we don't want
+ * to burden NMIs with unnecessary memory barriers when code
+ * modification is not being done (which is most of the time).
+ *
+ * A mutex is already held when ftrace_arch_code_modify_prepare
+ * and post_process are called. No locks need to be taken here.
+ *
+ * Stop machine will make sure currently running NMIs are done
+ * and new NMIs will see the updated variable before we need
+ * to worry about NMIs doing memory barriers.
+ */
+static int modifying_code __read_mostly;
+static DEFINE_PER_CPU(int, save_modifying_code);
+
 int ftrace_arch_code_modify_prepare(void)
 {
 	set_kernel_text_rw();
+	modifying_code = 1;
 	return 0;
 }
 
 int ftrace_arch_code_modify_post_process(void)
 {
+	modifying_code = 0;
 	set_kernel_text_ro();
 	return 0;
 }
@@ -149,6 +167,11 @@ static void ftrace_mod_code(void)
 
 void ftrace_nmi_enter(void)
 {
+	__get_cpu_var(save_modifying_code) = modifying_code;
+
+	if (!__get_cpu_var(save_modifying_code))
+		return;
+
 	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
 		smp_rmb();
 		ftrace_mod_code();
@@ -160,6 +183,9 @@ void ftrace_nmi_enter(void)
 
 void ftrace_nmi_exit(void)
 {
+	if (!__get_cpu_var(save_modifying_code))
+		return;
+
 	/* Finish all executions before clearing nmi_running */
 	smp_mb();
 	atomic_dec(&nmi_running);
@@ -484,13 +510,3 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-
-extern unsigned long *sys_call_table;
-
-unsigned long __init arch_syscall_addr(int nr)
-{
-	return (unsigned long)(&sys_call_table)[nr];
-}
-#endif
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 5051b94..b2e2460 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -7,6 +7,7 @@
 
 #include <linux/init.h>
 #include <linux/start_kernel.h>
+#include <linux/mm.h>
 
 #include <asm/setup.h>
 #include <asm/sections.h>
@@ -29,14 +30,25 @@ static void __init i386_default_early_setup(void)
 
 void __init i386_start_kernel(void)
 {
+#ifdef CONFIG_X86_TRAMPOLINE
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	reserve_early_overlap_ok(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE,
+					 "EX TRAMPOLINE");
+#endif
+
 	reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS");
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
 	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		/* Assume only end is not page aligned */
 		u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 		u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-		u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+		u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index b5a9896..7147143 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -103,9 +103,10 @@ void __init x86_64_start_reservations(char *real_mode_data)
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
 	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+		/* Assume only end is not page aligned */
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
 		unsigned long ramdisk_size  = boot_params.hdr.ramdisk_size;
-		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
+		unsigned long ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 7fd318b..37c3d4b 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -442,8 +442,8 @@ is386:	movl $2,%ecx		# set MP
 	 */
 	cmpb $0,ready
 	jne 1f
-	movl $per_cpu__gdt_page,%eax
-	movl $per_cpu__stack_canary,%ecx
+	movl $gdt_page,%eax
+	movl $stack_canary,%ecx
 	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
 	shrl $16, %ecx
 	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
@@ -706,7 +706,7 @@ idt_descr:
 	.word 0				# 32 bit align gdt_desc.address
 ENTRY(early_gdt_descr)
 	.word GDT_ENTRIES*8-1
-	.long per_cpu__gdt_page		/* Overwritten for secondary CPUs */
+	.long gdt_page			/* Overwritten for secondary CPUs */
 
 /*
  * The boot_gdt must mirror the equivalent in setup.S and is
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b503..3d1e6f1 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
 #define GET_CR2_INTO_RCX movq %cr2, %rcx
 #endif
 
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
  * because we need identity-mapped pages.
  *
  */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad80a1c..ba390d7 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -4,6 +4,7 @@
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/hpet.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
@@ -35,6 +36,7 @@
 unsigned long				hpet_address;
 u8					hpet_blockid; /* OS timer block num */
 u8					hpet_msi_disable;
+u8					hpet_readback_cmp;
 
 #ifdef CONFIG_PCI_MSI
 static unsigned long			hpet_num_timers;
@@ -266,7 +268,7 @@ static void hpet_resume_device(void)
 	force_hpet_resume();
 }
 
-static void hpet_resume_counter(void)
+static void hpet_resume_counter(struct clocksource *cs)
 {
 	hpet_resume_device();
 	hpet_restart_counter();
@@ -394,14 +396,24 @@ static int hpet_next_event(unsigned long delta,
 	 * at that point and we would wait for the next hpet interrupt
 	 * forever. We found out that reading the CMP register back
 	 * forces the transfer so we can rely on the comparison with
-	 * the counter register below. If the read back from the
-	 * compare register does not match the value we programmed
-	 * then we might have a real hardware problem. We can not do
-	 * much about it here, but at least alert the user/admin with
-	 * a prominent warning.
+	 * the counter register below.
+	 *
+	 * That works fine on those ATI chipsets, but on newer Intel
+	 * chipsets (ICH9...) this triggers due to an erratum: Reading
+	 * the comparator immediately following a write is returning
+	 * the old value.
+	 *
+	 * We restrict the read back to the affected ATI chipsets (set
+	 * by quirks) and also run it with hpet=verbose for debugging
+	 * purposes.
 	 */
-	WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
-		  KERN_WARNING "hpet: compare register read back failed.\n");
+	if (hpet_readback_cmp || hpet_verbose) {
+		u32 cmp = hpet_readl(HPET_Tn_CMP(timer));
+
+		if (cmp != cnt)
+			printk_once(KERN_WARNING
+			    "hpet: compare register read back failed.\n");
+	}
 
 	return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
@@ -952,7 +964,7 @@ fs_initcall(hpet_late_init);
 
 void hpet_disable(void)
 {
-	if (is_hpet_capable()) {
+	if (is_hpet_capable() && hpet_virt_address) {
 		unsigned int cfg = hpet_readl(HPET_CFG);
 
 		if (hpet_legacy_int_enabled) {
@@ -1143,6 +1155,7 @@ int hpet_set_periodic_freq(unsigned long freq)
 		do_div(clc, freq);
 		clc >>= hpet_clockevent.shift;
 		hpet_pie_delta = clc;
+		hpet_pie_limit = 0;
 	}
 	return 1;
 }
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 05d5fec..a8f1b80 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -189,48 +189,20 @@ static int get_hbp_len(u8 hbp_len)
 }
 
 /*
- * Check for virtual address in user space.
- */
-int arch_check_va_in_userspace(unsigned long va, u8 hbp_len)
-{
-	unsigned int len;
-
-	len = get_hbp_len(hbp_len);
-
-	return (va <= TASK_SIZE - len);
-}
-
-/*
  * Check for virtual address in kernel space.
  */
-static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len)
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
 {
 	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 
-	len = get_hbp_len(hbp_len);
+	va = info->address;
+	len = get_hbp_len(info->len);
 
 	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
 }
 
-/*
- * Store a breakpoint's encoded address, length, and type.
- */
-static int arch_store_info(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	/*
-	 * For kernel-addresses, either the address or symbol name can be
-	 * specified.
-	 */
-	if (info->name)
-		info->address = (unsigned long)
-				kallsyms_lookup_name(info->name);
-	if (info->address)
-		return 0;
-
-	return -EINVAL;
-}
-
 int arch_bp_generic_fields(int x86_len, int x86_type,
 			   int *gen_len, int *gen_type)
 {
@@ -319,8 +291,7 @@ static int arch_build_bp_info(struct perf_event *bp)
 /*
  * Validate the arch-specific HW Breakpoint register settings
  */
-int arch_validate_hwbkpt_settings(struct perf_event *bp,
-				  struct task_struct *tsk)
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
 {
 	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 	unsigned int align;
@@ -333,16 +304,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp,
 
 	ret = -EINVAL;
 
-	if (info->type == X86_BREAKPOINT_EXECUTE)
-		/*
-		 * Ptrace-refactoring code
-		 * For now, we'll allow instruction breakpoint only for user-space
-		 * addresses
-		 */
-		if ((!arch_check_va_in_userspace(info->address, info->len)) &&
-			info->len != X86_BREAKPOINT_EXECUTE)
-			return ret;
-
 	switch (info->len) {
 	case X86_BREAKPOINT_LEN_1:
 		align = 0;
@@ -362,10 +323,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp,
 		return ret;
 	}
 
-	ret = arch_store_info(bp);
-
-	if (ret < 0)
-		return ret;
 	/*
 	 * Check that the low-order bits of the address are appropriate
 	 * for the alignment implied by len.
@@ -373,15 +330,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp,
 	if (info->address & align)
 		return -EINVAL;
 
-	/* Check that the virtual address is in the proper range */
-	if (tsk) {
-		if (!arch_check_va_in_userspace(info->address, info->len))
-			return -EFAULT;
-	} else {
-		if (!arch_check_va_in_kernelspace(info->address, info->len))
-			return -EFAULT;
-	}
-
 	return 0;
 }
 
@@ -502,8 +450,6 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 		rcu_read_lock();
 
 		bp = per_cpu(bp_per_reg[i], cpu);
-		if (bp)
-			rc = NOTIFY_DONE;
 		/*
 		 * Reset the 'i'th TRAP bit in dr6 to denote completion of
 		 * exception handling
@@ -522,7 +468,13 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 
 		rcu_read_unlock();
 	}
-	if (dr6 & (~DR_TRAP_BITS))
+	/*
+	 * Further processing in do_debug() is needed for a) user-space
+	 * breakpoints (to generate signals) and b) when the system has
+	 * taken exception due to multiple causes
+	 */
+	if ((current->thread.debugreg6 & DR_TRAP_BITS) ||
+	    (dr6 & (~DR_TRAP_BITS)))
 		rc = NOTIFY_DONE;
 
 	set_debugreg(dr7, 7);
@@ -547,8 +499,3 @@ void hw_breakpoint_pmu_read(struct perf_event *bp)
 {
 	/* TODO */
 }
-
-void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
-{
-	/* TODO */
-}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index f2f8540..86cef6b 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/regset.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 
 #include <asm/sigcontext.h>
 #include <asm/processor.h>
@@ -101,69 +102,71 @@ void __cpuinit fpu_init(void)
 
 	mxcsr_feature_mask_init();
 	/* clean state in init */
-	if (cpu_has_xsave)
-		current_thread_info()->status = TS_XSAVE;
-	else
-		current_thread_info()->status = 0;
+	current_thread_info()->status = 0;
 	clear_used_math();
 }
 #endif	/* CONFIG_X86_64 */
 
-/*
- * The _current_ task is using the FPU for the first time
- * so initialize it and set the mxcsr to its default
- * value at reset if we support XMM instructions and then
- * remeber the current task has used the FPU.
- */
-int init_fpu(struct task_struct *tsk)
+static void fpu_finit(struct fpu *fpu)
 {
-	if (tsk_used_math(tsk)) {
-		if (HAVE_HWFP && tsk == current)
-			unlazy_fpu(tsk);
-		return 0;
-	}
-
-	/*
-	 * Memory allocation at the first usage of the FPU and other state.
-	 */
-	if (!tsk->thread.xstate) {
-		tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
-						      GFP_KERNEL);
-		if (!tsk->thread.xstate)
-			return -ENOMEM;
-	}
-
 #ifdef CONFIG_X86_32
 	if (!HAVE_HWFP) {
-		memset(tsk->thread.xstate, 0, xstate_size);
-		finit_task(tsk);
-		set_stopped_child_used_math(tsk);
-		return 0;
+		finit_soft_fpu(&fpu->state->soft);
+		return;
 	}
 #endif
 
 	if (cpu_has_fxsr) {
-		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+		struct i387_fxsave_struct *fx = &fpu->state->fxsave;
 
 		memset(fx, 0, xstate_size);
 		fx->cwd = 0x37f;
 		if (cpu_has_xmm)
 			fx->mxcsr = MXCSR_DEFAULT;
 	} else {
-		struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
+		struct i387_fsave_struct *fp = &fpu->state->fsave;
 		memset(fp, 0, xstate_size);
 		fp->cwd = 0xffff037fu;
 		fp->swd = 0xffff0000u;
 		fp->twd = 0xffffffffu;
 		fp->fos = 0xffff0000u;
 	}
+}
+
+/*
+ * The _current_ task is using the FPU for the first time
+ * so initialize it and set the mxcsr to its default
+ * value at reset if we support XMM instructions and then
+ * remeber the current task has used the FPU.
+ */
+int init_fpu(struct task_struct *tsk)
+{
+	int ret;
+
+	if (tsk_used_math(tsk)) {
+		if (HAVE_HWFP && tsk == current)
+			unlazy_fpu(tsk);
+		return 0;
+	}
+
 	/*
-	 * Only the device not available exception or ptrace can call init_fpu.
+	 * Memory allocation at the first usage of the FPU and other state.
 	 */
+	ret = fpu_alloc(&tsk->thread.fpu);
+	if (ret)
+		return ret;
+
+	fpu_finit(&tsk->thread.fpu);
+
 	set_stopped_child_used_math(tsk);
 	return 0;
 }
 
+/*
+ * The xstateregs_active() routine is the same as the fpregs_active() routine,
+ * as the "regset->n" for the xstate regset will be updated based on the feature
+ * capabilites supported by the xsave.
+ */
 int fpregs_active(struct task_struct *target, const struct user_regset *regset)
 {
 	return tsk_used_math(target) ? regset->n : 0;
@@ -188,7 +191,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
 		return ret;
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.xstate->fxsave, 0, -1);
+				   &target->thread.fpu.state->fxsave, 0, -1);
 }
 
 int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
@@ -204,22 +207,82 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
-	set_stopped_child_used_math(target);
-
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.xstate->fxsave, 0, -1);
+				 &target->thread.fpu.state->fxsave, 0, -1);
 
 	/*
 	 * mxcsr reserved bits must be masked to zero for security reasons.
 	 */
-	target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
+	target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
 
 	/*
 	 * update the header bits in the xsave header, indicating the
 	 * presence of FP and SSE state.
 	 */
 	if (cpu_has_xsave)
-		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+		target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
+	return ret;
+}
+
+int xstateregs_get(struct task_struct *target, const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		void *kbuf, void __user *ubuf)
+{
+	int ret;
+
+	if (!cpu_has_xsave)
+		return -ENODEV;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	/*
+	 * Copy the 48bytes defined by the software first into the xstate
+	 * memory layout in the thread struct, so that we can copy the entire
+	 * xstateregs to the user using one user_regset_copyout().
+	 */
+	memcpy(&target->thread.fpu.state->fxsave.sw_reserved,
+	       xstate_fx_sw_bytes, sizeof(xstate_fx_sw_bytes));
+
+	/*
+	 * Copy the xstate memory layout.
+	 */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fpu.state->xsave, 0, -1);
+	return ret;
+}
+
+int xstateregs_set(struct task_struct *target, const struct user_regset *regset,
+		  unsigned int pos, unsigned int count,
+		  const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct xsave_hdr_struct *xsave_hdr;
+
+	if (!cpu_has_xsave)
+		return -ENODEV;
+
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.fpu.state->xsave, 0, -1);
+
+	/*
+	 * mxcsr reserved bits must be masked to zero for security reasons.
+	 */
+	target->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
+
+	xsave_hdr = &target->thread.fpu.state->xsave.xsave_hdr;
+
+	xsave_hdr->xstate_bv &= pcntxt_mask;
+	/*
+	 * These bits must be zero.
+	 */
+	xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
 
 	return ret;
 }
@@ -299,7 +362,7 @@ static inline u32 twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
 static void
 convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
 {
-	struct i387_fxsave_struct *fxsave = &tsk->thread.xstate->fxsave;
+	struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
 	struct _fpreg *to = (struct _fpreg *) &env->st_space[0];
 	struct _fpxreg *from = (struct _fpxreg *) &fxsave->st_space[0];
 	int i;
@@ -339,7 +402,7 @@ static void convert_to_fxsr(struct task_struct *tsk,
 			    const struct user_i387_ia32_struct *env)
 
 {
-	struct i387_fxsave_struct *fxsave = &tsk->thread.xstate->fxsave;
+	struct i387_fxsave_struct *fxsave = &tsk->thread.fpu.state->fxsave;
 	struct _fpreg *from = (struct _fpreg *) &env->st_space[0];
 	struct _fpxreg *to = (struct _fpxreg *) &fxsave->st_space[0];
 	int i;
@@ -379,7 +442,7 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset,
 
 	if (!cpu_has_fxsr) {
 		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					   &target->thread.xstate->fsave, 0,
+					   &target->thread.fpu.state->fsave, 0,
 					   -1);
 	}
 
@@ -404,14 +467,12 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
-	set_stopped_child_used_math(target);
-
 	if (!HAVE_HWFP)
 		return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
 
 	if (!cpu_has_fxsr) {
 		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.xstate->fsave, 0, -1);
+					  &target->thread.fpu.state->fsave, 0, -1);
 	}
 
 	if (pos > 0 || count < sizeof(env))
@@ -426,7 +487,7 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	 * presence of FP.
 	 */
 	if (cpu_has_xsave)
-		target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
+		target->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
 	return ret;
 }
 
@@ -437,7 +498,7 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
-	struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
+	struct i387_fsave_struct *fp = &tsk->thread.fpu.state->fsave;
 
 	fp->status = fp->swd;
 	if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
@@ -448,7 +509,7 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
-	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+	struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave;
 	struct user_i387_ia32_struct env;
 	int err = 0;
 
@@ -483,7 +544,7 @@ static int save_i387_xsave(void __user *buf)
 	 * header as well as change any contents in the memory layout.
 	 * xrestore as part of sigreturn will capture all the changes.
 	 */
-	tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+	tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
 
 	if (save_i387_fxsave(fx) < 0)
 		return -1;
@@ -535,7 +596,7 @@ static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
 
-	return __copy_from_user(&tsk->thread.xstate->fsave, buf,
+	return __copy_from_user(&tsk->thread.fpu.state->fsave, buf,
 				sizeof(struct i387_fsave_struct));
 }
 
@@ -546,10 +607,10 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
 	struct user_i387_ia32_struct env;
 	int err;
 
-	err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
+	err = __copy_from_user(&tsk->thread.fpu.state->fxsave, &buf->_fxsr_env[0],
 			       size);
 	/* mxcsr reserved bits must be masked to zero for security reasons */
-	tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
+	tsk->thread.fpu.state->fxsave.mxcsr &= mxcsr_feature_mask;
 	if (err || __copy_from_user(&env, buf, sizeof(env)))
 		return 1;
 	convert_to_fxsr(tsk, &env);
@@ -565,7 +626,7 @@ static int restore_i387_xsave(void __user *buf)
 	struct i387_fxsave_struct __user *fx =
 		(struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
 	struct xsave_hdr_struct *xsave_hdr =
-				&current->thread.xstate->xsave.xsave_hdr;
+				&current->thread.fpu.state->xsave.xsave_hdr;
 	u64 mask;
 	int err;
 
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 23c1679..2dfd315 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -16,7 +16,7 @@
 #include <asm/hpet.h>
 #include <asm/smp.h>
 
-DEFINE_SPINLOCK(i8253_lock);
+DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
 /*
@@ -33,7 +33,7 @@ struct clock_event_device *global_clock_event;
 static void init_pit_timer(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -62,7 +62,7 @@ static void init_pit_timer(enum clock_event_mode mode,
 		/* Nothing to do here */
 		break;
 	}
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 }
 
 /*
@@ -72,10 +72,10 @@ static void init_pit_timer(enum clock_event_mode mode,
  */
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 	outb_pit(delta & 0xff , PIT_CH0);	/* LSB */
 	outb_pit(delta >> 8 , PIT_CH0);		/* MSB */
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 
 	return 0;
 }
@@ -130,7 +130,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	int count;
 	u32 jifs;
 
-	spin_lock_irqsave(&i8253_lock, flags);
+	raw_spin_lock_irqsave(&i8253_lock, flags);
 	/*
 	 * Although our caller may have the read side of xtime_lock,
 	 * this is now a seqlock, and we are cheating in this routine
@@ -176,7 +176,7 @@ static cycle_t pit_read(struct clocksource *cs)
 	old_count = count;
 	old_jifs = jifs;
 
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
 
 	count = (LATCH - 1) - count;
 
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index df89102..cafa7c8 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -5,7 +5,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
@@ -32,8 +31,14 @@
  */
 
 static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_RAW_SPINLOCK(i8259A_lock);
 static void mask_and_ack_8259A(unsigned int);
+static void mask_8259A(void);
+static void unmask_8259A(void);
+static void disable_8259A_irq(unsigned int irq);
+static void enable_8259A_irq(unsigned int irq);
+static void init_8259A(int auto_eoi);
+static int i8259A_irq_pending(unsigned int irq);
 
 struct irq_chip i8259A_chip = {
 	.name		= "XT-PIC",
@@ -63,51 +68,51 @@ unsigned int cached_irq_mask = 0xffff;
  */
 unsigned long io_apic_irqs;
 
-void disable_8259A_irq(unsigned int irq)
+static void disable_8259A_irq(unsigned int irq)
 {
 	unsigned int mask = 1 << irq;
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask |= mask;
 	if (irq & 8)
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
 		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-void enable_8259A_irq(unsigned int irq)
+static void enable_8259A_irq(unsigned int irq)
 {
 	unsigned int mask = ~(1 << irq);
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	cached_irq_mask &= mask;
 	if (irq & 8)
 		outb(cached_slave_mask, PIC_SLAVE_IMR);
 	else
 		outb(cached_master_mask, PIC_MASTER_IMR);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-int i8259A_irq_pending(unsigned int irq)
+static int i8259A_irq_pending(unsigned int irq)
 {
 	unsigned int mask = 1<<irq;
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	if (irq < 8)
 		ret = inb(PIC_MASTER_CMD) & mask;
 	else
 		ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	return ret;
 }
 
-void make_8259A_irq(unsigned int irq)
+static void make_8259A_irq(unsigned int irq)
 {
 	disable_irq_nosync(irq);
 	io_apic_irqs &= ~(1<<irq);
@@ -150,7 +155,7 @@ static void mask_and_ack_8259A(unsigned int irq)
 	unsigned int irqmask = 1 << irq;
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 	/*
 	 * Lightweight spurious IRQ detection. We do not want
 	 * to overdo spurious IRQ handling - it's usually a sign
@@ -183,7 +188,7 @@ handle_real_irq:
 		outb(cached_master_mask, PIC_MASTER_IMR);
 		outb(0x60+irq, PIC_MASTER_CMD);	/* 'Specific EOI to master */
 	}
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
 
 spurious_8259A_irq:
@@ -271,47 +276,37 @@ static struct sys_device device_i8259A = {
 	.cls	= &i8259_sysdev_class,
 };
 
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-void mask_8259A(void)
+static void mask_8259A(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-void unmask_8259A(void)
+static void unmask_8259A(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-void init_8259A(int auto_eoi)
+static void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
 
 	i8259A_auto_eoi = auto_eoi;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
@@ -356,5 +351,64 @@ void init_8259A(int auto_eoi)
 	outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
 	outb(cached_slave_mask, PIC_SLAVE_IMR);	  /* restore slave IRQ mask */
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+/*
+ * make i8259 a driver so that we can select pic functions at run time. the goal
+ * is to make x86 binary compatible among pc compatible and non-pc compatible
+ * platforms, such as x86 MID.
+ */
+
+static void legacy_pic_noop(void) { };
+static void legacy_pic_uint_noop(unsigned int unused) { };
+static void legacy_pic_int_noop(int unused) { };
+
+static struct irq_chip dummy_pic_chip  = {
+	.name = "dummy pic",
+	.mask = legacy_pic_uint_noop,
+	.unmask = legacy_pic_uint_noop,
+	.disable = legacy_pic_uint_noop,
+	.mask_ack = legacy_pic_uint_noop,
+};
+static int legacy_pic_irq_pending_noop(unsigned int irq)
+{
+	return 0;
+}
+
+struct legacy_pic null_legacy_pic = {
+	.nr_legacy_irqs = 0,
+	.chip = &dummy_pic_chip,
+	.mask_all = legacy_pic_noop,
+	.restore_mask = legacy_pic_noop,
+	.init = legacy_pic_int_noop,
+	.irq_pending = legacy_pic_irq_pending_noop,
+	.make_irq = legacy_pic_uint_noop,
+};
+
+struct legacy_pic default_legacy_pic = {
+	.nr_legacy_irqs = NR_IRQS_LEGACY,
+	.chip  = &i8259A_chip,
+	.mask_all  = mask_8259A,
+	.restore_mask = unmask_8259A,
+	.init = init_8259A,
+	.irq_pending = i8259A_irq_pending,
+	.make_irq = make_8259A_irq,
+};
+
+struct legacy_pic *legacy_pic = &default_legacy_pic;
+
+static int __init i8259A_init_sysfs(void)
+{
+	int error;
+
+	if (legacy_pic != &default_legacy_pic)
+		return 0;
+
+	error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sysdev_register(&device_i8259A);
+	return error;
 }
+
+device_initcall(i8259A_init_sysfs);
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index d593222..990ae7c 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -5,7 +5,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/timex.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/kprobes.h>
 #include <linux/init.h>
@@ -61,7 +60,7 @@ static irqreturn_t math_error_irq(int cpl, void *dev_id)
 	outb(0, 0xF0);
 	if (ignore_fpu_irq || !boot_cpu_data.hard_math)
 		return IRQ_NONE;
-	math_error((void __user *)get_irq_regs()->ip);
+	math_error(get_irq_regs(), 0, 16);
 	return IRQ_HANDLED;
 }
 
@@ -84,24 +83,7 @@ static struct irqaction irq2 = {
 };
 
 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... IRQ0_VECTOR - 1] = -1,
-	[IRQ0_VECTOR] = 0,
-	[IRQ1_VECTOR] = 1,
-	[IRQ2_VECTOR] = 2,
-	[IRQ3_VECTOR] = 3,
-	[IRQ4_VECTOR] = 4,
-	[IRQ5_VECTOR] = 5,
-	[IRQ6_VECTOR] = 6,
-	[IRQ7_VECTOR] = 7,
-	[IRQ8_VECTOR] = 8,
-	[IRQ9_VECTOR] = 9,
-	[IRQ10_VECTOR] = 10,
-	[IRQ11_VECTOR] = 11,
-	[IRQ12_VECTOR] = 12,
-	[IRQ13_VECTOR] = 13,
-	[IRQ14_VECTOR] = 14,
-	[IRQ15_VECTOR] = 15,
-	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+	[0 ... NR_VECTORS - 1] = -1,
 };
 
 int vector_used_by_percpu_irq(unsigned int vector)
@@ -123,12 +105,12 @@ void __init init_ISA_irqs(void)
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
 	init_bsp_APIC();
 #endif
-	init_8259A(0);
+	legacy_pic->init(0);
 
 	/*
 	 * 16 old-style INTA-cycle interrupts:
 	 */
-	for (i = 0; i < NR_IRQS_LEGACY; i++) {
+	for (i = 0; i < legacy_pic->nr_legacy_irqs; i++) {
 		struct irq_desc *desc = irq_to_desc(i);
 
 		desc->status = IRQ_DISABLED;
@@ -142,9 +124,44 @@ void __init init_ISA_irqs(void)
 
 void __init init_IRQ(void)
 {
+	int i;
+
+	/*
+	 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
+	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
+	 * then this configuration will likely be static after the boot. If
+	 * these IRQ's are handled by more mordern controllers like IO-APIC,
+	 * then this vector space can be freed and re-used dynamically as the
+	 * irq's migrate etc.
+	 */
+	for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
+		per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
+
 	x86_init.irqs.intr_init();
 }
 
+/*
+ * Setup the vector to irq mappings.
+ */
+void setup_vector_irq(int cpu)
+{
+#ifndef CONFIG_X86_IO_APIC
+	int irq;
+
+	/*
+	 * On most of the platforms, legacy PIC delivers the interrupts on the
+	 * boot cpu. But there are certain platforms where PIC interrupts are
+	 * delivered to multiple cpu's. If the legacy IRQ is handled by the
+	 * legacy PIC, for the new cpu that is coming online, setup the static
+	 * legacy vector to irq mapping:
+	 */
+	for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
+		per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
+#endif
+
+	__setup_vector_irq(cpu);
+}
+
 static void __init smp_intr_init(void)
 {
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c
index cbc4332..0f7bc20 100644
--- a/arch/x86/kernel/k8.c
+++ b/arch/x86/kernel/k8.c
@@ -2,8 +2,8 @@
  * Shared support code for AMD K8 northbridges and derivates.
  * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
  */
-#include <linux/gfp.h>
 #include <linux/types.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/module.h>
@@ -121,3 +121,17 @@ void k8_flush_garts(void)
 }
 EXPORT_SYMBOL_GPL(k8_flush_garts);
 
+static __init int init_k8_nbs(void)
+{
+	int err = 0;
+
+	err = cache_k8_northbridges();
+
+	if (err < 0)
+		printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n");
+
+	return err;
+}
+
+/* This has to go after the PCI subsystem */
+fs_initcall(init_k8_nbs);
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index e444357..8afd9f3 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -9,6 +9,7 @@
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/stat.h>
 #include <linux/io.h>
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index dd74fe72..01ab17a 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -42,24 +42,13 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/nmi.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
-
 #include <asm/apic.h>
 
-/*
- * Put the error code here just in case the user cares:
- */
-static int gdb_x86errcode;
-
-/*
- * Likewise, the vector number here (since GDB only gets the signal
- * number through the usual means, and that's not very specific):
- */
-static int gdb_x86vector = -1;
-
 /**
  *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
  *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
@@ -204,40 +193,98 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 
 static struct hw_breakpoint {
 	unsigned		enabled;
-	unsigned		type;
-	unsigned		len;
 	unsigned long		addr;
+	int			len;
+	int			type;
+	struct perf_event	**pev;
 } breakinfo[4];
 
+static unsigned long early_dr7;
+
 static void kgdb_correct_hw_break(void)
 {
-	unsigned long dr7;
-	int correctit = 0;
-	int breakbit;
 	int breakno;
 
-	get_debugreg(dr7, 7);
 	for (breakno = 0; breakno < 4; breakno++) {
-		breakbit = 2 << (breakno << 1);
-		if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
-			correctit = 1;
-			dr7 |= breakbit;
-			dr7 &= ~(0xf0000 << (breakno << 2));
-			dr7 |= ((breakinfo[breakno].len << 2) |
-				 breakinfo[breakno].type) <<
-			       ((breakno << 2) + 16);
+		struct perf_event *bp;
+		struct arch_hw_breakpoint *info;
+		int val;
+		int cpu = raw_smp_processor_id();
+		if (!breakinfo[breakno].enabled)
+			continue;
+		if (dbg_is_early) {
 			set_debugreg(breakinfo[breakno].addr, breakno);
-
-		} else {
-			if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
-				correctit = 1;
-				dr7 &= ~breakbit;
-				dr7 &= ~(0xf0000 << (breakno << 2));
-			}
+			early_dr7 |= encode_dr7(breakno,
+						breakinfo[breakno].len,
+						breakinfo[breakno].type);
+			set_debugreg(early_dr7, 7);
+			continue;
 		}
+		bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		info = counter_arch_bp(bp);
+		if (bp->attr.disabled != 1)
+			continue;
+		bp->attr.bp_addr = breakinfo[breakno].addr;
+		bp->attr.bp_len = breakinfo[breakno].len;
+		bp->attr.bp_type = breakinfo[breakno].type;
+		info->address = breakinfo[breakno].addr;
+		info->len = breakinfo[breakno].len;
+		info->type = breakinfo[breakno].type;
+		val = arch_install_hw_breakpoint(bp);
+		if (!val)
+			bp->attr.disabled = 0;
 	}
-	if (correctit)
-		set_debugreg(dr7, 7);
+	if (!dbg_is_early)
+		hw_breakpoint_restore();
+}
+
+static int hw_break_reserve_slot(int breakno)
+{
+	int cpu;
+	int cnt = 0;
+	struct perf_event **pevent;
+
+	if (dbg_is_early)
+		return 0;
+
+	for_each_online_cpu(cpu) {
+		cnt++;
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		if (dbg_reserve_bp_slot(*pevent))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	for_each_online_cpu(cpu) {
+		cnt--;
+		if (!cnt)
+			break;
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		dbg_release_bp_slot(*pevent);
+	}
+	return -1;
+}
+
+static int hw_break_release_slot(int breakno)
+{
+	struct perf_event **pevent;
+	int cpu;
+
+	if (dbg_is_early)
+		return 0;
+
+	for_each_online_cpu(cpu) {
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		if (dbg_release_bp_slot(*pevent))
+			/*
+			 * The debugger is responisble for handing the retry on
+			 * remove failure.
+			 */
+			return -1;
+	}
+	return 0;
 }
 
 static int
@@ -251,6 +298,10 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 	if (i == 4)
 		return -1;
 
+	if (hw_break_release_slot(i)) {
+		printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
+		return -1;
+	}
 	breakinfo[i].enabled = 0;
 
 	return 0;
@@ -259,15 +310,27 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 static void kgdb_remove_all_hw_break(void)
 {
 	int i;
+	int cpu = raw_smp_processor_id();
+	struct perf_event *bp;
 
-	for (i = 0; i < 4; i++)
-		memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+	for (i = 0; i < 4; i++) {
+		if (!breakinfo[i].enabled)
+			continue;
+		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+		if (bp->attr.disabled == 1)
+			continue;
+		if (dbg_is_early)
+			early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
+						 breakinfo[i].type);
+		else
+			arch_uninstall_hw_breakpoint(bp);
+		bp->attr.disabled = 1;
+	}
 }
 
 static int
 kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 {
-	unsigned type;
 	int i;
 
 	for (i = 0; i < 4; i++)
@@ -278,27 +341,42 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 
 	switch (bptype) {
 	case BP_HARDWARE_BREAKPOINT:
-		type = 0;
-		len  = 1;
+		len = 1;
+		breakinfo[i].type = X86_BREAKPOINT_EXECUTE;
 		break;
 	case BP_WRITE_WATCHPOINT:
-		type = 1;
+		breakinfo[i].type = X86_BREAKPOINT_WRITE;
 		break;
 	case BP_ACCESS_WATCHPOINT:
-		type = 3;
+		breakinfo[i].type = X86_BREAKPOINT_RW;
 		break;
 	default:
 		return -1;
 	}
-
-	if (len == 1 || len == 2 || len == 4)
-		breakinfo[i].len  = len - 1;
-	else
+	switch (len) {
+	case 1:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_1;
+		break;
+	case 2:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_2;
+		break;
+	case 4:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case 8:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
 		return -1;
-
-	breakinfo[i].enabled = 1;
+	}
 	breakinfo[i].addr = addr;
-	breakinfo[i].type = type;
+	if (hw_break_reserve_slot(i)) {
+		breakinfo[i].addr = 0;
+		return -1;
+	}
+	breakinfo[i].enabled = 1;
 
 	return 0;
 }
@@ -313,25 +391,26 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
  */
 void kgdb_disable_hw_debug(struct pt_regs *regs)
 {
+	int i;
+	int cpu = raw_smp_processor_id();
+	struct perf_event *bp;
+
 	/* Disable hardware debugging while we are in kgdb: */
 	set_debugreg(0UL, 7);
-}
-
-/**
- *	kgdb_post_primary_code - Save error vector/code numbers.
- *	@regs: Original pt_regs.
- *	@e_vector: Original error vector.
- *	@err_code: Original error code.
- *
- *	This is needed on architectures which support SMP and KGDB.
- *	This function is called after all the slave cpus have been put
- *	to a know spin state and the primary CPU has control over KGDB.
- */
-void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
-{
-	/* primary processor is completely in the debugger */
-	gdb_x86vector = e_vector;
-	gdb_x86errcode = err_code;
+	for (i = 0; i < 4; i++) {
+		if (!breakinfo[i].enabled)
+			continue;
+		if (dbg_is_early) {
+			early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
+						 breakinfo[i].type);
+			continue;
+		}
+		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+		if (bp->attr.disabled == 1)
+			continue;
+		arch_uninstall_hw_breakpoint(bp);
+		bp->attr.disabled = 1;
+	}
 }
 
 #ifdef CONFIG_SMP
@@ -378,7 +457,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 			       struct pt_regs *linux_regs)
 {
 	unsigned long addr;
-	unsigned long dr6;
 	char *ptr;
 	int newPC;
 
@@ -404,20 +482,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 				   raw_smp_processor_id());
 		}
 
-		get_debugreg(dr6, 6);
-		if (!(dr6 & 0x4000)) {
-			int breakno;
-
-			for (breakno = 0; breakno < 4; breakno++) {
-				if (dr6 & (1 << breakno) &&
-				    breakinfo[breakno].type == 0) {
-					/* Set restore flag: */
-					linux_regs->flags |= X86_EFLAGS_RF;
-					break;
-				}
-			}
-		}
-		set_debugreg(0UL, 6);
 		kgdb_correct_hw_break();
 
 		return 0;
@@ -485,8 +549,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 		break;
 
 	case DIE_DEBUG:
-		if (atomic_read(&kgdb_cpu_doing_single_step) ==
-		    raw_smp_processor_id()) {
+		if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
 			if (user_mode(regs))
 				return single_step_cont(regs, args);
 			break;
@@ -501,7 +564,7 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 			return NOTIFY_DONE;
 	}
 
-	if (kgdb_handle_exception(args->trapnr, args->signr, args->err, regs))
+	if (kgdb_handle_exception(args->trapnr, args->signr, cmd, regs))
 		return NOTIFY_DONE;
 
 	/* Must touch watchdog before return to normal operation */
@@ -509,6 +572,24 @@ static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 	return NOTIFY_STOP;
 }
 
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr	= trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return __kgdb_notify(&args, cmd);
+}
+
 static int
 kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
 {
@@ -542,6 +623,51 @@ int kgdb_arch_init(void)
 	return register_die_notifier(&kgdb_notifier);
 }
 
+static void kgdb_hw_overflow_handler(struct perf_event *event, int nmi,
+		struct perf_sample_data *data, struct pt_regs *regs)
+{
+	kgdb_ll_trap(DIE_DEBUG, "debug", regs, 0, 0, SIGTRAP);
+}
+
+void kgdb_arch_late(void)
+{
+	int i, cpu;
+	struct perf_event_attr attr;
+	struct perf_event **pevent;
+
+	/*
+	 * Pre-allocate the hw breakpoint structions in the non-atomic
+	 * portion of kgdb because this operation requires mutexs to
+	 * complete.
+	 */
+	hw_breakpoint_init(&attr);
+	attr.bp_addr = (unsigned long)kgdb_arch_init;
+	attr.bp_len = HW_BREAKPOINT_LEN_1;
+	attr.bp_type = HW_BREAKPOINT_W;
+	attr.disabled = 1;
+	for (i = 0; i < 4; i++) {
+		if (breakinfo[i].pev)
+			continue;
+		breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL);
+		if (IS_ERR(breakinfo[i].pev)) {
+			printk(KERN_ERR "kgdb: Could not allocate hw"
+			       "breakpoints\nDisabling the kernel debugger\n");
+			breakinfo[i].pev = NULL;
+			kgdb_arch_exit();
+			return;
+		}
+		for_each_online_cpu(cpu) {
+			pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
+			pevent[0]->hw.sample_period = 1;
+			pevent[0]->overflow_handler = kgdb_hw_overflow_handler;
+			if (pevent[0]->destroy != NULL) {
+				pevent[0]->destroy = NULL;
+				release_bp_slot(*pevent);
+			}
+		}
+	}
+}
+
 /**
  *	kgdb_arch_exit - Perform any architecture specific uninitalization.
  *
@@ -550,6 +676,13 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
+	int i;
+	for (i = 0; i < 4; i++) {
+		if (breakinfo[i].pev) {
+			unregister_wide_hw_breakpoint(breakinfo[i].pev);
+			breakinfo[i].pev = NULL;
+		}
+	}
 	unregister_die_notifier(&kgdb_notifier);
 }
 
@@ -582,6 +715,11 @@ unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
 	return instruction_pointer(regs);
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->ip = ip;
+}
+
 struct kgdb_arch arch_kgdb_ops = {
 	/* Breakpoint instruction: */
 	.gdb_bpt_instr		= { 0xcc },
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 5b8c750..675879b 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
+#include <linux/ftrace.h>
 
 #include <asm/cacheflush.h>
 #include <asm/desc.h>
@@ -106,16 +107,22 @@ struct kretprobe_blackpoint kretprobe_blacklist[] = {
 };
 const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
 
-/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
-static void __kprobes set_jmp_op(void *from, void *to)
+static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op)
 {
-	struct __arch_jmp_op {
-		char op;
+	struct __arch_relative_insn {
+		u8 op;
 		s32 raddr;
-	} __attribute__((packed)) * jop;
-	jop = (struct __arch_jmp_op *)from;
-	jop->raddr = (s32)((long)(to) - ((long)(from) + 5));
-	jop->op = RELATIVEJUMP_INSTRUCTION;
+	} __attribute__((packed)) *insn;
+
+	insn = (struct __arch_relative_insn *)from;
+	insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
+	insn->op = op;
+}
+
+/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
+static void __kprobes synthesize_reljump(void *from, void *to)
+{
+	__synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE);
 }
 
 /*
@@ -202,7 +209,7 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
 	/*
 	 *  Basically, kp->ainsn.insn has an original instruction.
 	 *  However, RIP-relative instruction can not do single-stepping
-	 *  at different place, fix_riprel() tweaks the displacement of
+	 *  at different place, __copy_instruction() tweaks the displacement of
 	 *  that instruction. In that case, we can't recover the instruction
 	 *  from the kp->ainsn.insn.
 	 *
@@ -284,21 +291,37 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
 }
 
 /*
- * Adjust the displacement if the instruction uses the %rip-relative
- * addressing mode.
+ * Copy an instruction and adjust the displacement if the instruction
+ * uses the %rip-relative addressing mode.
  * If it does, Return the address of the 32-bit displacement word.
  * If not, return null.
  * Only applicable to 64-bit x86.
  */
-static void __kprobes fix_riprel(struct kprobe *p)
+static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
 {
-#ifdef CONFIG_X86_64
 	struct insn insn;
-	kernel_insn_init(&insn, p->ainsn.insn);
+	int ret;
+	kprobe_opcode_t buf[MAX_INSN_SIZE];
 
+	kernel_insn_init(&insn, src);
+	if (recover) {
+		insn_get_opcode(&insn);
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
+			ret = recover_probed_instruction(buf,
+							 (unsigned long)src);
+			if (ret)
+				return 0;
+			kernel_insn_init(&insn, buf);
+		}
+	}
+	insn_get_length(&insn);
+	memcpy(dest, insn.kaddr, insn.length);
+
+#ifdef CONFIG_X86_64
 	if (insn_rip_relative(&insn)) {
 		s64 newdisp;
 		u8 *disp;
+		kernel_insn_init(&insn, dest);
 		insn_get_displacement(&insn);
 		/*
 		 * The copied instruction uses the %rip-relative addressing
@@ -312,20 +335,23 @@ static void __kprobes fix_riprel(struct kprobe *p)
 		 * extension of the original signed 32-bit displacement would
 		 * have given.
 		 */
-		newdisp = (u8 *) p->addr + (s64) insn.displacement.value -
-			  (u8 *) p->ainsn.insn;
+		newdisp = (u8 *) src + (s64) insn.displacement.value -
+			  (u8 *) dest;
 		BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check.  */
-		disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn);
+		disp = (u8 *) dest + insn_offset_displacement(&insn);
 		*(s32 *) disp = (s32) newdisp;
 	}
 #endif
+	return insn.length;
 }
 
 static void __kprobes arch_copy_kprobe(struct kprobe *p)
 {
-	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
-
-	fix_riprel(p);
+	/*
+	 * Copy an instruction without recovering int3, because it will be
+	 * put by another subsystem.
+	 */
+	__copy_instruction(p->ainsn.insn, p->addr, 0);
 
 	if (can_boost(p->addr))
 		p->ainsn.boostable = 0;
@@ -337,6 +363,9 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	if (alternatives_text_reserved(p->addr, p->addr))
+		return -EINVAL;
+
 	if (!can_probe((unsigned long)p->addr))
 		return -EILSEQ;
 	/* insn: must be on special executable page on x86. */
@@ -393,26 +422,22 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 
 static void __kprobes clear_btf(void)
 {
-	if (test_thread_flag(TIF_DEBUGCTLMSR))
-		update_debugctlmsr(0);
+	if (test_thread_flag(TIF_BLOCKSTEP)) {
+		unsigned long debugctl = get_debugctlmsr();
+
+		debugctl &= ~DEBUGCTLMSR_BTF;
+		update_debugctlmsr(debugctl);
+	}
 }
 
 static void __kprobes restore_btf(void)
 {
-	if (test_thread_flag(TIF_DEBUGCTLMSR))
-		update_debugctlmsr(current->thread.debugctlmsr);
-}
+	if (test_thread_flag(TIF_BLOCKSTEP)) {
+		unsigned long debugctl = get_debugctlmsr();
 
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	clear_btf();
-	regs->flags |= X86_EFLAGS_TF;
-	regs->flags &= ~X86_EFLAGS_IF;
-	/* single step inline if the instruction is an int3 */
-	if (p->opcode == BREAKPOINT_INSTRUCTION)
-		regs->ip = (unsigned long)p->addr;
-	else
-		regs->ip = (unsigned long)p->ainsn.insn;
+		debugctl |= DEBUGCTLMSR_BTF;
+		update_debugctlmsr(debugctl);
+	}
 }
 
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
@@ -426,20 +451,50 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	*sara = (unsigned long) &kretprobe_trampoline;
 }
 
+#ifdef CONFIG_OPTPROBES
+static int  __kprobes setup_detour_execution(struct kprobe *p,
+					     struct pt_regs *regs,
+					     int reenter);
+#else
+#define setup_detour_execution(p, regs, reenter) (0)
+#endif
+
 static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
-				       struct kprobe_ctlblk *kcb)
+				       struct kprobe_ctlblk *kcb, int reenter)
 {
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
+	if (setup_detour_execution(p, regs, reenter))
+		return;
+
+#if !defined(CONFIG_PREEMPT)
 	if (p->ainsn.boostable == 1 && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
-		reset_current_kprobe();
+		if (!reenter)
+			reset_current_kprobe();
+		/*
+		 * Reentering boosted probe doesn't reset current_kprobe,
+		 * nor set current_kprobe, because it doesn't use single
+		 * stepping.
+		 */
 		regs->ip = (unsigned long)p->ainsn.insn;
 		preempt_enable_no_resched();
 		return;
 	}
 #endif
-	prepare_singlestep(p, regs);
-	kcb->kprobe_status = KPROBE_HIT_SS;
+	if (reenter) {
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p, regs, kcb);
+		kcb->kprobe_status = KPROBE_REENTER;
+	} else
+		kcb->kprobe_status = KPROBE_HIT_SS;
+	/* Prepare real single stepping */
+	clear_btf();
+	regs->flags |= X86_EFLAGS_TF;
+	regs->flags &= ~X86_EFLAGS_IF;
+	/* single step inline if the instruction is an int3 */
+	if (p->opcode == BREAKPOINT_INSTRUCTION)
+		regs->ip = (unsigned long)p->addr;
+	else
+		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
 /*
@@ -453,11 +508,8 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 	switch (kcb->kprobe_status) {
 	case KPROBE_HIT_SSDONE:
 	case KPROBE_HIT_ACTIVE:
-		save_previous_kprobe(kcb);
-		set_current_kprobe(p, regs, kcb);
 		kprobes_inc_nmissed_count(p);
-		prepare_singlestep(p, regs);
-		kcb->kprobe_status = KPROBE_REENTER;
+		setup_singlestep(p, regs, kcb, 1);
 		break;
 	case KPROBE_HIT_SS:
 		/* A probe has been hit in the codepath leading up to, or just
@@ -490,20 +542,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	struct kprobe_ctlblk *kcb;
 
 	addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
-	if (*addr != BREAKPOINT_INSTRUCTION) {
-		/*
-		 * The breakpoint instruction was removed right
-		 * after we hit it.  Another cpu has removed
-		 * either a probepoint or a debugger breakpoint
-		 * at this address.  In either case, no further
-		 * handling of this interrupt is appropriate.
-		 * Back up over the (now missing) int3 and run
-		 * the original instruction.
-		 */
-		regs->ip = (unsigned long)addr;
-		return 1;
-	}
-
 	/*
 	 * We don't want to be preempted for the entire
 	 * duration of kprobe processing. We conditionally
@@ -532,13 +570,26 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			 * more here.
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs))
-				setup_singlestep(p, regs, kcb);
+				setup_singlestep(p, regs, kcb, 0);
 			return 1;
 		}
+	} else if (*addr != BREAKPOINT_INSTRUCTION) {
+		/*
+		 * The breakpoint instruction was removed right
+		 * after we hit it.  Another cpu has removed
+		 * either a probepoint or a debugger breakpoint
+		 * at this address.  In either case, no further
+		 * handling of this interrupt is appropriate.
+		 * Back up over the (now missing) int3 and run
+		 * the original instruction.
+		 */
+		regs->ip = (unsigned long)addr;
+		preempt_enable_no_resched();
+		return 1;
 	} else if (kprobe_running()) {
 		p = __get_cpu_var(current_kprobe);
 		if (p->break_handler && p->break_handler(p, regs)) {
-			setup_singlestep(p, regs, kcb);
+			setup_singlestep(p, regs, kcb, 0);
 			return 1;
 		}
 	} /* else: not a kprobe fault; let the kernel handle it */
@@ -547,6 +598,69 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	return 0;
 }
 
+#ifdef CONFIG_X86_64
+#define SAVE_REGS_STRING		\
+	/* Skip cs, ip, orig_ax. */	\
+	"	subq $24, %rsp\n"	\
+	"	pushq %rdi\n"		\
+	"	pushq %rsi\n"		\
+	"	pushq %rdx\n"		\
+	"	pushq %rcx\n"		\
+	"	pushq %rax\n"		\
+	"	pushq %r8\n"		\
+	"	pushq %r9\n"		\
+	"	pushq %r10\n"		\
+	"	pushq %r11\n"		\
+	"	pushq %rbx\n"		\
+	"	pushq %rbp\n"		\
+	"	pushq %r12\n"		\
+	"	pushq %r13\n"		\
+	"	pushq %r14\n"		\
+	"	pushq %r15\n"
+#define RESTORE_REGS_STRING		\
+	"	popq %r15\n"		\
+	"	popq %r14\n"		\
+	"	popq %r13\n"		\
+	"	popq %r12\n"		\
+	"	popq %rbp\n"		\
+	"	popq %rbx\n"		\
+	"	popq %r11\n"		\
+	"	popq %r10\n"		\
+	"	popq %r9\n"		\
+	"	popq %r8\n"		\
+	"	popq %rax\n"		\
+	"	popq %rcx\n"		\
+	"	popq %rdx\n"		\
+	"	popq %rsi\n"		\
+	"	popq %rdi\n"		\
+	/* Skip orig_ax, ip, cs */	\
+	"	addq $24, %rsp\n"
+#else
+#define SAVE_REGS_STRING		\
+	/* Skip cs, ip, orig_ax and gs. */	\
+	"	subl $16, %esp\n"	\
+	"	pushl %fs\n"		\
+	"	pushl %es\n"		\
+	"	pushl %ds\n"		\
+	"	pushl %eax\n"		\
+	"	pushl %ebp\n"		\
+	"	pushl %edi\n"		\
+	"	pushl %esi\n"		\
+	"	pushl %edx\n"		\
+	"	pushl %ecx\n"		\
+	"	pushl %ebx\n"
+#define RESTORE_REGS_STRING		\
+	"	popl %ebx\n"		\
+	"	popl %ecx\n"		\
+	"	popl %edx\n"		\
+	"	popl %esi\n"		\
+	"	popl %edi\n"		\
+	"	popl %ebp\n"		\
+	"	popl %eax\n"		\
+	/* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
+	"	addl $24, %esp\n"
+#endif
+
 /*
  * When a retprobed function returns, this code saves registers and
  * calls trampoline_handler() runs, which calls the kretprobe's handler.
@@ -560,65 +674,16 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
 			/* We don't bother saving the ss register */
 			"	pushq %rsp\n"
 			"	pushfq\n"
-			/*
-			 * Skip cs, ip, orig_ax.
-			 * trampoline_handler() will plug in these values
-			 */
-			"	subq $24, %rsp\n"
-			"	pushq %rdi\n"
-			"	pushq %rsi\n"
-			"	pushq %rdx\n"
-			"	pushq %rcx\n"
-			"	pushq %rax\n"
-			"	pushq %r8\n"
-			"	pushq %r9\n"
-			"	pushq %r10\n"
-			"	pushq %r11\n"
-			"	pushq %rbx\n"
-			"	pushq %rbp\n"
-			"	pushq %r12\n"
-			"	pushq %r13\n"
-			"	pushq %r14\n"
-			"	pushq %r15\n"
+			SAVE_REGS_STRING
 			"	movq %rsp, %rdi\n"
 			"	call trampoline_handler\n"
 			/* Replace saved sp with true return address. */
 			"	movq %rax, 152(%rsp)\n"
-			"	popq %r15\n"
-			"	popq %r14\n"
-			"	popq %r13\n"
-			"	popq %r12\n"
-			"	popq %rbp\n"
-			"	popq %rbx\n"
-			"	popq %r11\n"
-			"	popq %r10\n"
-			"	popq %r9\n"
-			"	popq %r8\n"
-			"	popq %rax\n"
-			"	popq %rcx\n"
-			"	popq %rdx\n"
-			"	popq %rsi\n"
-			"	popq %rdi\n"
-			/* Skip orig_ax, ip, cs */
-			"	addq $24, %rsp\n"
+			RESTORE_REGS_STRING
 			"	popfq\n"
 #else
 			"	pushf\n"
-			/*
-			 * Skip cs, ip, orig_ax and gs.
-			 * trampoline_handler() will plug in these values
-			 */
-			"	subl $16, %esp\n"
-			"	pushl %fs\n"
-			"	pushl %es\n"
-			"	pushl %ds\n"
-			"	pushl %eax\n"
-			"	pushl %ebp\n"
-			"	pushl %edi\n"
-			"	pushl %esi\n"
-			"	pushl %edx\n"
-			"	pushl %ecx\n"
-			"	pushl %ebx\n"
+			SAVE_REGS_STRING
 			"	movl %esp, %eax\n"
 			"	call trampoline_handler\n"
 			/* Move flags to cs */
@@ -626,15 +691,7 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
 			"	movl %edx, 52(%esp)\n"
 			/* Replace saved flags with true return address. */
 			"	movl %eax, 56(%esp)\n"
-			"	popl %ebx\n"
-			"	popl %ecx\n"
-			"	popl %edx\n"
-			"	popl %esi\n"
-			"	popl %edi\n"
-			"	popl %ebp\n"
-			"	popl %eax\n"
-			/* Skip ds, es, fs, gs, orig_ax and ip */
-			"	addl $24, %esp\n"
+			RESTORE_REGS_STRING
 			"	popf\n"
 #endif
 			"	ret\n");
@@ -802,8 +859,8 @@ static void __kprobes resume_execution(struct kprobe *p,
 			 * These instructions can be executed directly if it
 			 * jumps back to correct address.
 			 */
-			set_jmp_op((void *)regs->ip,
-				   (void *)orig_ip + (regs->ip - copy_ip));
+			synthesize_reljump((void *)regs->ip,
+				(void *)orig_ip + (regs->ip - copy_ip));
 			p->ainsn.boostable = 1;
 		} else {
 			p->ainsn.boostable = -1;
@@ -1030,6 +1087,358 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
+
+#ifdef CONFIG_OPTPROBES
+
+/* Insert a call instruction at address 'from', which calls address 'to'.*/
+static void __kprobes synthesize_relcall(void *from, void *to)
+{
+	__synthesize_relative_insn(from, to, RELATIVECALL_OPCODE);
+}
+
+/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */
+static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr,
+					  unsigned long val)
+{
+#ifdef CONFIG_X86_64
+	*addr++ = 0x48;
+	*addr++ = 0xbf;
+#else
+	*addr++ = 0xb8;
+#endif
+	*(unsigned long *)addr = val;
+}
+
+void __kprobes kprobes_optinsn_template_holder(void)
+{
+	asm volatile (
+			".global optprobe_template_entry\n"
+			"optprobe_template_entry: \n"
+#ifdef CONFIG_X86_64
+			/* We don't bother saving the ss register */
+			"	pushq %rsp\n"
+			"	pushfq\n"
+			SAVE_REGS_STRING
+			"	movq %rsp, %rsi\n"
+			".global optprobe_template_val\n"
+			"optprobe_template_val: \n"
+			ASM_NOP5
+			ASM_NOP5
+			".global optprobe_template_call\n"
+			"optprobe_template_call: \n"
+			ASM_NOP5
+			/* Move flags to rsp */
+			"	movq 144(%rsp), %rdx\n"
+			"	movq %rdx, 152(%rsp)\n"
+			RESTORE_REGS_STRING
+			/* Skip flags entry */
+			"	addq $8, %rsp\n"
+			"	popfq\n"
+#else /* CONFIG_X86_32 */
+			"	pushf\n"
+			SAVE_REGS_STRING
+			"	movl %esp, %edx\n"
+			".global optprobe_template_val\n"
+			"optprobe_template_val: \n"
+			ASM_NOP5
+			".global optprobe_template_call\n"
+			"optprobe_template_call: \n"
+			ASM_NOP5
+			RESTORE_REGS_STRING
+			"	addl $4, %esp\n"	/* skip cs */
+			"	popf\n"
+#endif
+			".global optprobe_template_end\n"
+			"optprobe_template_end: \n");
+}
+
+#define TMPL_MOVE_IDX \
+	((long)&optprobe_template_val - (long)&optprobe_template_entry)
+#define TMPL_CALL_IDX \
+	((long)&optprobe_template_call - (long)&optprobe_template_entry)
+#define TMPL_END_IDX \
+	((long)&optprobe_template_end - (long)&optprobe_template_entry)
+
+#define INT3_SIZE sizeof(kprobe_opcode_t)
+
+/* Optimized kprobe call back function: called from optinsn */
+static void __kprobes optimized_callback(struct optimized_kprobe *op,
+					 struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	preempt_disable();
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(&op->kp);
+	} else {
+		/* Save skipped registers */
+#ifdef CONFIG_X86_64
+		regs->cs = __KERNEL_CS;
+#else
+		regs->cs = __KERNEL_CS | get_kernel_rpl();
+		regs->gs = 0;
+#endif
+		regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
+		regs->orig_ax = ~0UL;
+
+		__get_cpu_var(current_kprobe) = &op->kp;
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+		opt_pre_handler(&op->kp, regs);
+		__get_cpu_var(current_kprobe) = NULL;
+	}
+	preempt_enable_no_resched();
+}
+
+static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
+{
+	int len = 0, ret;
+
+	while (len < RELATIVEJUMP_SIZE) {
+		ret = __copy_instruction(dest + len, src + len, 1);
+		if (!ret || !can_boost(dest + len))
+			return -EINVAL;
+		len += ret;
+	}
+	/* Check whether the address range is reserved */
+	if (ftrace_text_reserved(src, src + len - 1) ||
+	    alternatives_text_reserved(src, src + len - 1))
+		return -EBUSY;
+
+	return len;
+}
+
+/* Check whether insn is indirect jump */
+static int __kprobes insn_is_indirect_jump(struct insn *insn)
+{
+	return ((insn->opcode.bytes[0] == 0xff &&
+		(X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */
+		insn->opcode.bytes[0] == 0xea);	/* Segment based jump */
+}
+
+/* Check whether insn jumps into specified address range */
+static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
+{
+	unsigned long target = 0;
+
+	switch (insn->opcode.bytes[0]) {
+	case 0xe0:	/* loopne */
+	case 0xe1:	/* loope */
+	case 0xe2:	/* loop */
+	case 0xe3:	/* jcxz */
+	case 0xe9:	/* near relative jump */
+	case 0xeb:	/* short relative jump */
+		break;
+	case 0x0f:
+		if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */
+			break;
+		return 0;
+	default:
+		if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */
+			break;
+		return 0;
+	}
+	target = (unsigned long)insn->next_byte + insn->immediate.value;
+
+	return (start <= target && target <= start + len);
+}
+
+/* Decode whole function to ensure any instructions don't jump into target */
+static int __kprobes can_optimize(unsigned long paddr)
+{
+	int ret;
+	unsigned long addr, size = 0, offset = 0;
+	struct insn insn;
+	kprobe_opcode_t buf[MAX_INSN_SIZE];
+	/* Dummy buffers for lookup_symbol_attrs */
+	static char __dummy_buf[KSYM_NAME_LEN];
+
+	/* Lookup symbol including addr */
+	if (!kallsyms_lookup(paddr, &size, &offset, NULL, __dummy_buf))
+		return 0;
+
+	/* Check there is enough space for a relative jump. */
+	if (size - offset < RELATIVEJUMP_SIZE)
+		return 0;
+
+	/* Decode instructions */
+	addr = paddr - offset;
+	while (addr < paddr - offset + size) { /* Decode until function end */
+		if (search_exception_tables(addr))
+			/*
+			 * Since some fixup code will jumps into this function,
+			 * we can't optimize kprobe in this function.
+			 */
+			return 0;
+		kernel_insn_init(&insn, (void *)addr);
+		insn_get_opcode(&insn);
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
+			ret = recover_probed_instruction(buf, addr);
+			if (ret)
+				return 0;
+			kernel_insn_init(&insn, buf);
+		}
+		insn_get_length(&insn);
+		/* Recover address */
+		insn.kaddr = (void *)addr;
+		insn.next_byte = (void *)(addr + insn.length);
+		/* Check any instructions don't jump into target */
+		if (insn_is_indirect_jump(&insn) ||
+		    insn_jump_into_range(&insn, paddr + INT3_SIZE,
+					 RELATIVE_ADDR_SIZE))
+			return 0;
+		addr += insn.length;
+	}
+
+	return 1;
+}
+
+/* Check optimized_kprobe can actually be optimized. */
+int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op)
+{
+	int i;
+	struct kprobe *p;
+
+	for (i = 1; i < op->optinsn.size; i++) {
+		p = get_kprobe(op->kp.addr + i);
+		if (p && !kprobe_disabled(p))
+			return -EEXIST;
+	}
+
+	return 0;
+}
+
+/* Check the addr is within the optimized instructions. */
+int __kprobes arch_within_optimized_kprobe(struct optimized_kprobe *op,
+					   unsigned long addr)
+{
+	return ((unsigned long)op->kp.addr <= addr &&
+		(unsigned long)op->kp.addr + op->optinsn.size > addr);
+}
+
+/* Free optimized instruction slot */
+static __kprobes
+void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
+{
+	if (op->optinsn.insn) {
+		free_optinsn_slot(op->optinsn.insn, dirty);
+		op->optinsn.insn = NULL;
+		op->optinsn.size = 0;
+	}
+}
+
+void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
+{
+	__arch_remove_optimized_kprobe(op, 1);
+}
+
+/*
+ * Copy replacing target instructions
+ * Target instructions MUST be relocatable (checked inside)
+ */
+int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
+{
+	u8 *buf;
+	int ret;
+	long rel;
+
+	if (!can_optimize((unsigned long)op->kp.addr))
+		return -EILSEQ;
+
+	op->optinsn.insn = get_optinsn_slot();
+	if (!op->optinsn.insn)
+		return -ENOMEM;
+
+	/*
+	 * Verify if the address gap is in 2GB range, because this uses
+	 * a relative jump.
+	 */
+	rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE;
+	if (abs(rel) > 0x7fffffff)
+		return -ERANGE;
+
+	buf = (u8 *)op->optinsn.insn;
+
+	/* Copy instructions into the out-of-line buffer */
+	ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
+	if (ret < 0) {
+		__arch_remove_optimized_kprobe(op, 0);
+		return ret;
+	}
+	op->optinsn.size = ret;
+
+	/* Copy arch-dep-instance from template */
+	memcpy(buf, &optprobe_template_entry, TMPL_END_IDX);
+
+	/* Set probe information */
+	synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op);
+
+	/* Set probe function call */
+	synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback);
+
+	/* Set returning jmp instruction at the tail of out-of-line buffer */
+	synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
+			   (u8 *)op->kp.addr + op->optinsn.size);
+
+	flush_icache_range((unsigned long) buf,
+			   (unsigned long) buf + TMPL_END_IDX +
+			   op->optinsn.size + RELATIVEJUMP_SIZE);
+	return 0;
+}
+
+/* Replace a breakpoint (int3) with a relative jump.  */
+int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op)
+{
+	unsigned char jmp_code[RELATIVEJUMP_SIZE];
+	s32 rel = (s32)((long)op->optinsn.insn -
+			((long)op->kp.addr + RELATIVEJUMP_SIZE));
+
+	/* Backup instructions which will be replaced by jump address */
+	memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
+	       RELATIVE_ADDR_SIZE);
+
+	jmp_code[0] = RELATIVEJUMP_OPCODE;
+	*(s32 *)(&jmp_code[1]) = rel;
+
+	/*
+	 * text_poke_smp doesn't support NMI/MCE code modifying.
+	 * However, since kprobes itself also doesn't support NMI/MCE
+	 * code probing, it's not a problem.
+	 */
+	text_poke_smp(op->kp.addr, jmp_code, RELATIVEJUMP_SIZE);
+	return 0;
+}
+
+/* Replace a relative jump with a breakpoint (int3).  */
+void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
+{
+	u8 buf[RELATIVEJUMP_SIZE];
+
+	/* Set int3 to first byte for kprobes */
+	buf[0] = BREAKPOINT_INSTRUCTION;
+	memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
+	text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
+}
+
+static int  __kprobes setup_detour_execution(struct kprobe *p,
+					     struct pt_regs *regs,
+					     int reenter)
+{
+	struct optimized_kprobe *op;
+
+	if (p->flags & KPROBE_FLAG_OPTIMIZED) {
+		/* This kprobe is really able to run optimized path. */
+		op = container_of(p, struct optimized_kprobe, kp);
+		/* Detour through copied instructions */
+		regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
+		if (!reenter)
+			reset_current_kprobe();
+		preempt_enable_no_resched();
+		return 1;
+	}
+	return 0;
+}
+#endif
+
 int __init arch_init_kprobes(void)
 {
 	return 0;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index feaeb0d..eb9b76c 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -29,6 +29,8 @@
 #define KVM_SCALE 22
 
 static int kvmclock = 1;
+static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
 
 static int parse_no_kvmclock(char *arg)
 {
@@ -54,7 +56,8 @@ static unsigned long kvm_get_wallclock(void)
 
 	low = (int)__pa_symbol(&wall_clock);
 	high = ((u64)__pa_symbol(&wall_clock) >> 32);
-	native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
+
+	native_write_msr(msr_kvm_wall_clock, low, high);
 
 	vcpu_time = &get_cpu_var(hv_clock);
 	pvclock_read_wallclock(&wall_clock, vcpu_time, &ts);
@@ -130,7 +133,8 @@ static int kvm_register_clock(char *txt)
 	high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32);
 	printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n",
 	       cpu, high, low, txt);
-	return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high);
+
+	return native_write_msr_safe(msr_kvm_system_time, low, high);
 }
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -165,14 +169,14 @@ static void __init kvm_smp_prepare_boot_cpu(void)
 #ifdef CONFIG_KEXEC
 static void kvm_crash_shutdown(struct pt_regs *regs)
 {
-	native_write_msr_safe(MSR_KVM_SYSTEM_TIME, 0, 0);
+	native_write_msr(msr_kvm_system_time, 0, 0);
 	native_machine_crash_shutdown(regs);
 }
 #endif
 
 static void kvm_shutdown(void)
 {
-	native_write_msr_safe(MSR_KVM_SYSTEM_TIME, 0, 0);
+	native_write_msr(msr_kvm_system_time, 0, 0);
 	native_machine_shutdown();
 }
 
@@ -181,27 +185,37 @@ void __init kvmclock_init(void)
 	if (!kvm_para_available())
 		return;
 
-	if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
-		if (kvm_register_clock("boot clock"))
-			return;
-		pv_time_ops.sched_clock = kvm_clock_read;
-		x86_platform.calibrate_tsc = kvm_get_tsc_khz;
-		x86_platform.get_wallclock = kvm_get_wallclock;
-		x86_platform.set_wallclock = kvm_set_wallclock;
+	if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) {
+		msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+		msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+	} else if (!(kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)))
+		return;
+
+	printk(KERN_INFO "kvm-clock: Using msrs %x and %x",
+		msr_kvm_system_time, msr_kvm_wall_clock);
+
+	if (kvm_register_clock("boot clock"))
+		return;
+	pv_time_ops.sched_clock = kvm_clock_read;
+	x86_platform.calibrate_tsc = kvm_get_tsc_khz;
+	x86_platform.get_wallclock = kvm_get_wallclock;
+	x86_platform.set_wallclock = kvm_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
-		x86_cpuinit.setup_percpu_clockev =
-			kvm_setup_secondary_clock;
+	x86_cpuinit.setup_percpu_clockev =
+		kvm_setup_secondary_clock;
 #endif
 #ifdef CONFIG_SMP
-		smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
+	smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
 #endif
-		machine_ops.shutdown  = kvm_shutdown;
+	machine_ops.shutdown  = kvm_shutdown;
 #ifdef CONFIG_KEXEC
-		machine_ops.crash_shutdown  = kvm_crash_shutdown;
+	machine_ops.crash_shutdown  = kvm_crash_shutdown;
 #endif
-		kvm_get_preset_lpj();
-		clocksource_register(&kvm_clock);
-		pv_info.paravirt_enabled = 1;
-		pv_info.name = "KVM";
-	}
+	kvm_get_preset_lpj();
+	clocksource_register(&kvm_clock);
+	pv_info.paravirt_enabled = 1;
+	pv_info.name = "KVM";
+
+	if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
+		pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT);
 }
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index ec6ef60..ea69726 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/mm.h>
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 4a8bb82..035c8c5 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/kexec.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 #include <linux/reboot.h>
 #include <linux/numa.h>
 #include <linux/ftrace.h>
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index 845d80c..63eaf65 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -42,6 +42,7 @@
 #include <linux/kernel.h>
 #include <linux/mca.h>
 #include <linux/kprobes.h>
+#include <linux/slab.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/proc_fs.h>
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index cceb5bc..fa6551d 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -201,9 +201,9 @@ static int do_microcode_update(const void __user *buf, size_t size)
 	return error;
 }
 
-static int microcode_open(struct inode *unused1, struct file *unused2)
+static int microcode_open(struct inode *inode, struct file *file)
 {
-	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+	return capable(CAP_SYS_RAWIO) ? nonseekable_open(inode, file) : -EPERM;
 }
 
 static ssize_t microcode_write(struct file *file, const char __user *buf,
@@ -260,6 +260,7 @@ static void microcode_dev_exit(void)
 }
 
 MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+MODULE_ALIAS("devname:cpu/microcode");
 #else
 #define microcode_dev_init()	0
 #define microcode_dev_exit()	do { } while (0)
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index ebd193e..3561702 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -328,7 +328,7 @@ static int apply_microcode(int cpu)
 		       cpu_num, mc_intel->hdr.rev);
 		return -1;
 	}
-	pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x \n",
+	pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x\n",
 		cpu_num, val[1],
 		mc_intel->hdr.date & 0xffff,
 		mc_intel->hdr.date >> 24,
@@ -343,10 +343,11 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 				int (*get_ucode_data)(void *, const void *, size_t))
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+	u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL;
 	int new_rev = uci->cpu_sig.rev;
 	unsigned int leftover = size;
 	enum ucode_state state = UCODE_OK;
+	unsigned int curr_mc_size = 0;
 
 	while (leftover) {
 		struct microcode_header_intel mc_header;
@@ -361,9 +362,15 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 			break;
 		}
 
-		mc = vmalloc(mc_size);
-		if (!mc)
-			break;
+		/* For performance reasons, reuse mc area when possible */
+		if (!mc || mc_size > curr_mc_size) {
+			if (mc)
+				vfree(mc);
+			mc = vmalloc(mc_size);
+			if (!mc)
+				break;
+			curr_mc_size = mc_size;
+		}
 
 		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
 		    microcode_sanity_check(mc) < 0) {
@@ -376,13 +383,16 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 				vfree(new_mc);
 			new_rev = mc_header.rev;
 			new_mc  = mc;
-		} else
-			vfree(mc);
+			mc = NULL;	/* trigger new vmalloc */
+		}
 
 		ucode_ptr += mc_size;
 		leftover  -= mc_size;
 	}
 
+	if (mc)
+		vfree(mc);
+
 	if (leftover) {
 		if (new_mc)
 			vfree(new_mc);
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 712d15f..7182580 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -7,6 +7,8 @@
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/dmi.h>
+#include <linux/range.h>
+
 #include <asm/pci-direct.h>
 #include <linux/sort.h>
 #include <asm/io.h>
@@ -30,11 +32,6 @@ static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
 	{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
 };
 
-struct range {
-	u64 start;
-	u64 end;
-};
-
 static int __cpuinit cmp_range(const void *x1, const void *x2)
 {
 	const struct range *r1 = x1;
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 89f386f..e0bc186 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <linux/mm.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <asm/page.h>
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 40b54ce..d86dbf7 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -115,21 +115,6 @@ static void __init MP_bus_info(struct mpc_bus *m)
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
 }
 
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
 static void __init MP_ioapic_info(struct mpc_ioapic *m)
 {
 	if (!(m->flags & MPC_APIC_USABLE))
@@ -138,15 +123,7 @@ static void __init MP_ioapic_info(struct mpc_ioapic *m)
 	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
 	       m->apicid, m->apicver, m->apicaddr);
 
-	if (bad_ioapic(m->apicaddr))
-		return;
-
-	mp_ioapics[nr_ioapics].apicaddr = m->apicaddr;
-	mp_ioapics[nr_ioapics].apicid = m->apicid;
-	mp_ioapics[nr_ioapics].type = m->type;
-	mp_ioapics[nr_ioapics].apicver = m->apicver;
-	mp_ioapics[nr_ioapics].flags = m->flags;
-	nr_ioapics++;
+	mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
 }
 
 static void print_MP_intsrc_info(struct mpc_intsrc *m)
@@ -359,13 +336,6 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 		x86_init.mpparse.mpc_record(1);
 	}
 
-#ifdef CONFIG_X86_BIGSMP
-	generic_bigsmp_probe();
-#endif
-
-	if (apic->setup_apic_routing)
-		apic->setup_apic_routing();
-
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
@@ -671,7 +641,7 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
 	unsigned long size = get_mpc_size(mpf->physptr);
 
-	reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
+	reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc");
 }
 
 static int __init smp_scan_config(unsigned long base, unsigned long length)
@@ -700,7 +670,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 			       mpf, (u64)virt_to_phys(mpf));
 
 			mem = virt_to_phys(mpf);
-			reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
+			reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf");
 			if (mpf->physptr)
 				smp_reserve_memory(mpf);
 
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 3b7078a..5915e0b 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -10,8 +10,217 @@
  * of the License.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sfi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
+#include <asm/mpspec_def.h>
+#include <asm/hw_irq.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
+#include <asm/mrst.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+#include <asm/apb_timer.h>
+
+static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
+static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+int sfi_mtimer_num;
+
+struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
+EXPORT_SYMBOL_GPL(sfi_mrtc_array);
+int sfi_mrtc_num;
+
+static inline void assign_to_mp_irq(struct mpc_intsrc *m,
+				    struct mpc_intsrc *mp_irq)
+{
+	memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq,
+				struct mpc_intsrc *m)
+{
+	return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
+}
+
+static void save_mp_irq(struct mpc_intsrc *m)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!mp_irq_cmp(&mp_irqs[i], m))
+			return;
+	}
+
+	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
+/* parse all the mtimer info to a static mtimer array */
+static int __init sfi_parse_mtmr(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_timer_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mtimer_num) {
+		sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
+					struct sfi_timer_table_entry);
+		pentry = (struct sfi_timer_table_entry *) sb->pentry;
+		totallen = sfi_mtimer_num * sizeof(*pentry);
+		memcpy(sfi_mtimer_array, pentry, totallen);
+	}
+
+	printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num);
+	pentry = sfi_mtimer_array;
+	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
+		printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz,"
+			" irq = %d\n", totallen, (u32)pentry->phys_addr,
+			pentry->freq_hz, pentry->irq);
+			if (!pentry->irq)
+				continue;
+			mp_irq.type = MP_IOAPIC;
+			mp_irq.irqtype = mp_INT;
+/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
+			mp_irq.irqflag = 5;
+			mp_irq.srcbus = 0;
+			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+			mp_irq.dstapic = MP_APIC_ALL;
+			mp_irq.dstirq = pentry->irq;
+			save_mp_irq(&mp_irq);
+	}
+
+	return 0;
+}
+
+struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
+{
+	int i;
+	if (hint < sfi_mtimer_num) {
+		if (!sfi_mtimer_usage[hint]) {
+			pr_debug("hint taken for timer %d irq %d\n",\
+				hint, sfi_mtimer_array[hint].irq);
+			sfi_mtimer_usage[hint] = 1;
+			return &sfi_mtimer_array[hint];
+		}
+	}
+	/* take the first timer available */
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (!sfi_mtimer_usage[i]) {
+			sfi_mtimer_usage[i] = 1;
+			return &sfi_mtimer_array[i];
+		}
+		i++;
+	}
+	return NULL;
+}
+
+void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
+{
+	int i;
+	for (i = 0; i < sfi_mtimer_num;) {
+		if (mtmr->irq == sfi_mtimer_array[i].irq) {
+			sfi_mtimer_usage[i] = 0;
+			return;
+		}
+		i++;
+	}
+}
+
+/* parse all the mrtc info to a global mrtc array */
+int __init sfi_parse_mrtc(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_rtc_table_entry *pentry;
+	struct mpc_intsrc mp_irq;
+
+	int totallen;
+
+	sb = (struct sfi_table_simple *)table;
+	if (!sfi_mrtc_num) {
+		sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
+						struct sfi_rtc_table_entry);
+		pentry = (struct sfi_rtc_table_entry *)sb->pentry;
+		totallen = sfi_mrtc_num * sizeof(*pentry);
+		memcpy(sfi_mrtc_array, pentry, totallen);
+	}
+
+	printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num);
+	pentry = sfi_mrtc_array;
+	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
+		printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n",
+			totallen, (u32)pentry->phys_addr, pentry->irq);
+		mp_irq.type = MP_IOAPIC;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.irqflag = 0;
+		mp_irq.srcbus = 0;
+		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
+		mp_irq.dstapic = MP_APIC_ALL;
+		mp_irq.dstirq = pentry->irq;
+		save_mp_irq(&mp_irq);
+	}
+	return 0;
+}
+
+/*
+ * the secondary clock in Moorestown can be APBT or LAPIC clock, default to
+ * APBT but cmdline option can also override it.
+ */
+static void __cpuinit mrst_setup_secondary_clock(void)
+{
+	/* restore default lapic clock if disabled by cmdline */
+	if (disable_apbt_percpu)
+		return setup_secondary_APIC_clock();
+	apbt_setup_secondary_clock();
+}
+
+static unsigned long __init mrst_calibrate_tsc(void)
+{
+	unsigned long flags, fast_calibrate;
+
+	local_irq_save(flags);
+	fast_calibrate = apbt_quick_calibrate();
+	local_irq_restore(flags);
+
+	if (fast_calibrate)
+		return fast_calibrate;
+
+	return 0;
+}
+
+void __init mrst_time_init(void)
+{
+	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
+	pre_init_apic_IRQ0();
+	apbt_time_init();
+}
+
+void __init mrst_rtc_init(void)
+{
+	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+}
+
+/*
+ * if we use per cpu apb timer, the bootclock already setup. if we use lapic
+ * timer and one apbt timer for broadcast, we need to set up lapic boot clock.
+ */
+static void __init mrst_setup_boot_clock(void)
+{
+	pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu);
+	if (disable_apbt_percpu)
+		setup_boot_APIC_clock();
+};
+
+/* MID systems don't have i8042 controller */
+static int mrst_i8042_detect(void)
+{
+	return 0;
+}
 
 /*
  * Moorestown specific x86_init function overrides and early setup
@@ -21,4 +230,23 @@ void __init x86_mrst_early_setup(void)
 {
 	x86_init.resources.probe_roms = x86_init_noop;
 	x86_init.resources.reserve_resources = x86_init_noop;
+
+	x86_init.timers.timer_init = mrst_time_init;
+	x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock;
+
+	x86_init.irqs.pre_vector_init = x86_init_noop;
+
+	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
+
+	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
+	x86_platform.i8042_detect = mrst_i8042_detect;
+	x86_init.pci.init = pci_mrst_init;
+	x86_init.pci.fixup_irqs = x86_init_noop;
+
+	legacy_pic = &null_legacy_pic;
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+
 }
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 206735a..7bf2dc4 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -37,6 +37,7 @@
 #include <linux/cpu.h>
 #include <linux/notifier.h>
 #include <linux/uaccess.h>
+#include <linux/gfp.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
@@ -229,7 +230,7 @@ static int __cpuinit msr_class_cpu_callback(struct notifier_block *nfb,
 		msr_device_destroy(cpu);
 		break;
 	}
-	return err ? NOTIFY_BAD : NOTIFY_OK;
+	return notifier_from_errno(err);
 }
 
 static struct notifier_block __refdata msr_class_cpu_notifier = {
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 9d1d263..8297160 100644
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -17,7 +17,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/string.h>
+
 #include <asm/geode.h>
+#include <asm/setup.h>
 #include <asm/olpc.h>
 
 #ifdef CONFIG_OPEN_FIRMWARE
@@ -243,9 +245,11 @@ static int __init olpc_init(void)
 	olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
 			(unsigned char *) &olpc_platform_info.ecver, 1);
 
-	/* check to see if the VSA exists */
-	if (cs5535_has_vsa2())
-		olpc_platform_info.flags |= OLPC_F_VSA;
+#ifdef CONFIG_PCI_OLPC
+	/* If the VSA exists let it emulate PCI, if not emulate in kernel */
+	if (!cs5535_has_vsa2())
+		x86_init.pci.arch_init = pci_olpc_init;
+#endif
 
 	printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
 			((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 1b1739d..1db183e 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -428,10 +428,6 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.ptep_modify_prot_start = __ptep_modify_prot_start,
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
-#ifdef CONFIG_HIGHPTE
-	.kmap_atomic_pte = kmap_atomic,
-#endif
-
 #if PAGETABLE_LEVELS >= 3
 #ifdef CONFIG_X86_PAE
 	.set_pte_atomic = native_set_pte_atomic,
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde60..078d4ec 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -103,11 +103,16 @@ int use_calgary __read_mostly = 0;
 #define PMR_SOFTSTOPFAULT	0x40000000
 #define PMR_HARDSTOP		0x20000000
 
-#define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS		8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM		(MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY	4
+/*
+ * The maximum PHB bus number.
+ * x3950M2 (rare): 8 chassis, 48 PHBs per chassis = 384
+ * x3950M2: 4 chassis, 48 PHBs per chassis        = 192
+ * x3950 (PCIE): 8 chassis, 32 PHBs per chassis   = 256
+ * x3950 (PCIX): 8 chassis, 16 PHBs per chassis   = 128
+ */
+#define MAX_PHB_BUS_NUM		256
+
+#define PHBS_PER_CALGARY	  4
 
 /* register offsets in Calgary's internal register space */
 static const unsigned long tar_offsets[] = {
@@ -1051,8 +1056,6 @@ static int __init calgary_init_one(struct pci_dev *dev)
 	struct iommu_table *tbl;
 	int ret;
 
-	BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
-
 	bbar = busno_to_bbar(dev->bus->number);
 	ret = calgary_setup_tar(dev, bbar);
 	if (ret)
@@ -1309,7 +1312,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
 /*
  * get_tce_space_from_tar():
  * Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
  */
 static void __init get_tce_space_from_tar(void)
 {
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 75e14e2..4b7e3d8 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -2,6 +2,7 @@
 #include <linux/dma-debug.h>
 #include <linux/dmar.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 #include <linux/pci.h>
 #include <linux/kmemleak.h>
 
@@ -38,7 +39,7 @@ int iommu_detected __read_mostly = 0;
  * This variable becomes 1 if iommu=pt is passed on the kernel command line.
  * If this variable is 1, IOMMU implementations do no DMA translation for
  * devices and allow every device to access to whole physical memory. This is
- * useful if a user want to use an IOMMU only for KVM device assignment to
+ * useful if a user wants to use an IOMMU only for KVM device assignment to
  * guests and not for driver dma translation.
  */
 int iommu_pass_through __read_mostly;
@@ -65,7 +66,7 @@ int dma_set_mask(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_set_mask);
 
-#ifdef CONFIG_X86_64
+#if defined(CONFIG_X86_64) && !defined(CONFIG_NUMA)
 static __initdata void *dma32_bootmem_ptr;
 static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
 
@@ -116,14 +117,21 @@ static void __init dma32_free_bootmem(void)
 	dma32_bootmem_ptr = NULL;
 	dma32_bootmem_size = 0;
 }
+#else
+void __init dma32_reserve_bootmem(void)
+{
+}
+static void __init dma32_free_bootmem(void)
+{
+}
+
 #endif
 
 void __init pci_iommu_alloc(void)
 {
-#ifdef CONFIG_X86_64
 	/* free the range so iommu could get some range less than 4G */
 	dma32_free_bootmem();
-#endif
+
 	if (pci_swiotlb_detect())
 		goto out;
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index 34de53b..0f7f130 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -29,6 +29,7 @@
 #include <linux/iommu-helper.h>
 #include <linux/sysdev.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 #include <asm/atomic.h>
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
@@ -564,6 +565,9 @@ static void enable_gart_translations(void)
 
 		enable_gart_translation(dev, __pa(agp_gatt_table));
 	}
+
+	/* Flush the GART-TLB to remove stale entries */
+	k8_flush_garts();
 }
 
 /*
@@ -735,7 +739,7 @@ int __init gart_iommu_init(void)
 	unsigned long scratch;
 	long i;
 
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
+	if (num_k8_northbridges == 0)
 		return 0;
 
 #ifndef CONFIG_AGP_AMD64
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 22be12b..3af4af8 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -4,6 +4,7 @@
 #include <linux/scatterlist.h>
 #include <linux/string.h>
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/pci.h>
 #include <linux/mm.h>
 
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 7d2829d..a5bc528 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -31,8 +31,6 @@ static struct dma_map_ops swiotlb_dma_ops = {
 	.free_coherent = swiotlb_free_coherent,
 	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
 	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.map_sg = swiotlb_map_sg_attrs,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index c9b3522..e7e3521 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -20,7 +20,6 @@
 #include <asm/idle.h>
 #include <asm/uaccess.h>
 #include <asm/i387.h>
-#include <asm/ds.h>
 #include <asm/debugreg.h>
 
 unsigned long idle_halt;
@@ -32,26 +31,22 @@ struct kmem_cache *task_xstate_cachep;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
+	int ret;
+
 	*dst = *src;
-	if (src->thread.xstate) {
-		dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
-						      GFP_KERNEL);
-		if (!dst->thread.xstate)
-			return -ENOMEM;
-		WARN_ON((unsigned long)dst->thread.xstate & 15);
-		memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
+	if (fpu_allocated(&src->thread.fpu)) {
+		memset(&dst->thread.fpu, 0, sizeof(dst->thread.fpu));
+		ret = fpu_alloc(&dst->thread.fpu);
+		if (ret)
+			return ret;
+		fpu_copy(&dst->thread.fpu, &src->thread.fpu);
 	}
 	return 0;
 }
 
 void free_thread_xstate(struct task_struct *tsk)
 {
-	if (tsk->thread.xstate) {
-		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
-		tsk->thread.xstate = NULL;
-	}
-
-	WARN(tsk->thread.ds_ctx, "leaking DS context\n");
+	fpu_free(&tsk->thread.fpu);
 }
 
 void free_thread_info(struct thread_info *ti)
@@ -92,6 +87,13 @@ void exit_thread(void)
 	}
 }
 
+void show_regs(struct pt_regs *regs)
+{
+	show_registers(regs);
+	show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs),
+		   regs->bp);
+}
+
 void show_regs_common(void)
 {
 	const char *board, *product;
@@ -191,11 +193,16 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	prev = &prev_p->thread;
 	next = &next_p->thread;
 
-	if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
-	    test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
-		ds_switch_to(prev_p, next_p);
-	else if (next->debugctlmsr != prev->debugctlmsr)
-		update_debugctlmsr(next->debugctlmsr);
+	if (test_tsk_thread_flag(prev_p, TIF_BLOCKSTEP) ^
+	    test_tsk_thread_flag(next_p, TIF_BLOCKSTEP)) {
+		unsigned long debugctl = get_debugctlmsr();
+
+		debugctl &= ~DEBUGCTLMSR_BTF;
+		if (test_tsk_thread_flag(next_p, TIF_BLOCKSTEP))
+			debugctl |= DEBUGCTLMSR_BTF;
+
+		update_debugctlmsr(debugctl);
+	}
 
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
@@ -519,21 +526,39 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 }
 
 /*
- * Check for AMD CPUs, which have potentially C1E support
+ * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e.
+ * For more information see
+ * - Erratum #400 for NPT family 0xf and family 0x10 CPUs
+ * - Erratum #365 for family 0x11 (not affected because C1e not in use)
  */
 static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
 {
+	u64 val;
 	if (c->x86_vendor != X86_VENDOR_AMD)
-		return 0;
-
-	if (c->x86 < 0x0F)
-		return 0;
+		goto no_c1e_idle;
 
 	/* Family 0x0f models < rev F do not have C1E */
-	if (c->x86 == 0x0f && c->x86_model < 0x40)
-		return 0;
+	if (c->x86 == 0x0F && c->x86_model >= 0x40)
+		return 1;
 
-	return 1;
+	if (c->x86 == 0x10) {
+		/*
+		 * check OSVW bit for CPUs that are not affected
+		 * by erratum #400
+		 */
+		if (cpu_has(c, X86_FEATURE_OSVW)) {
+			rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val);
+			if (val >= 2) {
+				rdmsrl(MSR_AMD64_OSVW_STATUS, val);
+				if (!(val & BIT(1)))
+					goto no_c1e_idle;
+			}
+		}
+		return 1;
+	}
+
+no_c1e_idle:
+	return 0;
 }
 
 static cpumask_var_t c1e_mask;
@@ -600,7 +625,7 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_SMP
 	if (pm_idle == poll_idle && smp_num_siblings > 1) {
-		printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
+		printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
 			" performance may degrade.\n");
 	}
 #endif
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 37ad1e0..8d12878 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,7 +55,6 @@
 #include <asm/cpu.h>
 #include <asm/idle.h>
 #include <asm/syscalls.h>
-#include <asm/ds.h>
 #include <asm/debugreg.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
@@ -174,12 +173,6 @@ void __show_regs(struct pt_regs *regs, int all)
 			d6, d7);
 }
 
-void show_regs(struct pt_regs *regs)
-{
-	show_registers(regs);
-	show_trace(NULL, regs, &regs->sp, regs->bp);
-}
-
 void release_thread(struct task_struct *dead_task)
 {
 	BUG_ON(dead_task->mm);
@@ -244,13 +237,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
-
-	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
-	p->thread.ds_ctx = NULL;
-
-	clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR);
-	p->thread.debugctlmsr = 0;
-
 	return err;
 }
 
@@ -323,7 +309,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* we're going to use this soon, after a few expensive things */
 	if (preload_fpu)
-		prefetch(next->xstate);
+		prefetch(next->fpu.state);
 
 	/*
 	 * Reload esp0.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 41a26a8..3c2422a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -49,7 +49,6 @@
 #include <asm/ia32.h>
 #include <asm/idle.h>
 #include <asm/syscalls.h>
-#include <asm/ds.h>
 #include <asm/debugreg.h>
 
 asmlinkage extern void ret_from_fork(void);
@@ -211,12 +210,6 @@ void __show_regs(struct pt_regs *regs, int all)
 	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
 }
 
-void show_regs(struct pt_regs *regs)
-{
-	show_registers(regs);
-	show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
-}
-
 void release_thread(struct task_struct *dead_task)
 {
 	if (dead_task->mm) {
@@ -282,12 +275,12 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 
 	set_tsk_thread_flag(p, TIF_FORK);
 
-	p->thread.fs = me->thread.fs;
-	p->thread.gs = me->thread.gs;
 	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
+	p->thread.gs = p->thread.gsindex ? 0 : me->thread.gs;
 	savesegment(fs, p->thread.fsindex);
+	p->thread.fs = p->thread.fsindex ? 0 : me->thread.fs;
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 
@@ -319,13 +312,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		if (err)
 			goto out;
 	}
-
-	clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
-	p->thread.ds_ctx = NULL;
-
-	clear_tsk_thread_flag(p, TIF_DEBUGCTLMSR);
-	p->thread.debugctlmsr = 0;
-
 	err = 0;
 out:
 	if (err && p->thread.io_bitmap_ptr) {
@@ -402,7 +388,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* we're going to use this soon, after a few expensive things */
 	if (preload_fpu)
-		prefetch(next->xstate);
+		prefetch(next->fpu.state);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:
@@ -527,6 +513,7 @@ void set_personality_ia32(void)
 
 	/* Make sure to be in 32bit mode */
 	set_thread_flag(TIF_IA32);
+	current->personality |= force_personality32;
 
 	/* Prepare the first "return" to user space */
 	current_thread_info()->status |= TS_COMPAT;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 017d937..70c4872 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -2,9 +2,6 @@
 /*
  * Pentium III FXSR, SSE support
  *	Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * BTS tracing
- *	Markus Metzger <markus.t.metzger@intel.com>, Dec 2007
  */
 
 #include <linux/kernel.h>
@@ -12,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
 #include <linux/tracehook.h>
@@ -21,7 +19,6 @@
 #include <linux/audit.h>
 #include <linux/seccomp.h>
 #include <linux/signal.h>
-#include <linux/workqueue.h>
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 
@@ -35,7 +32,6 @@
 #include <asm/desc.h>
 #include <asm/prctl.h>
 #include <asm/proto.h>
-#include <asm/ds.h>
 #include <asm/hw_breakpoint.h>
 
 #include "tls.h"
@@ -48,6 +44,7 @@ enum x86_regset {
 	REGSET_FP,
 	REGSET_XFP,
 	REGSET_IOPERM64 = REGSET_XFP,
+	REGSET_XSTATE,
 	REGSET_TLS,
 	REGSET_IOPERM32,
 };
@@ -140,30 +137,6 @@ static const int arg_offs_table[] = {
 #endif
 };
 
-/**
- * regs_get_argument_nth() - get Nth argument at function call
- * @regs:	pt_regs which contains registers at function entry.
- * @n:		argument number.
- *
- * regs_get_argument_nth() returns @n th argument of a function call.
- * Since usually the kernel stack will be changed right after function entry,
- * you must use this at function entry. If the @n th entry is NOT in the
- * kernel stack or pt_regs, this returns 0.
- */
-unsigned long regs_get_argument_nth(struct pt_regs *regs, unsigned int n)
-{
-	if (n < ARRAY_SIZE(arg_offs_table))
-		return *(unsigned long *)((char *)regs + arg_offs_table[n]);
-	else {
-		/*
-		 * The typical case: arg n is on the stack.
-		 * (Note: stack[0] = return address, so skip it)
-		 */
-		n -= ARRAY_SIZE(arg_offs_table);
-		return regs_get_kernel_stack_nth(regs, 1 + n);
-	}
-}
-
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
@@ -604,7 +577,7 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
 	struct perf_event_attr attr;
 
 	/*
-	 * We shoud have at least an inactive breakpoint at this
+	 * We should have at least an inactive breakpoint at this
 	 * slot. It means the user is writing dr7 without having
 	 * written the address register first
 	 */
@@ -702,7 +675,7 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
-		val = ptrace_get_dr7(thread->ptrace_bps);
+		val = thread->ptrace_dr7;
 	}
 	return val;
 }
@@ -715,7 +688,7 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event_attr attr;
 
 	if (!t->ptrace_bps[nr]) {
-		hw_breakpoint_init(&attr);
+		ptrace_breakpoint_init(&attr);
 		/*
 		 * Put stub len and type to register (reserve) an inactive but
 		 * correct bp
@@ -778,8 +751,11 @@ int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
 			return rc;
 	}
 	/* All that's left is DR7 */
-	if (n == 7)
+	if (n == 7) {
 		rc = ptrace_write_dr7(tsk, val);
+		if (!rc)
+			thread->ptrace_dr7 = val;
+	}
 
 ret_path:
 	return rc;
@@ -808,342 +784,6 @@ static int ioperm_get(struct task_struct *target,
 				   0, IO_BITMAP_BYTES);
 }
 
-#ifdef CONFIG_X86_PTRACE_BTS
-/*
- * A branch trace store context.
- *
- * Contexts may only be installed by ptrace_bts_config() and only for
- * ptraced tasks.
- *
- * Contexts are destroyed when the tracee is detached from the tracer.
- * The actual destruction work requires interrupts enabled, so the
- * work is deferred and will be scheduled during __ptrace_unlink().
- *
- * Contexts hold an additional task_struct reference on the traced
- * task, as well as a reference on the tracer's mm.
- *
- * Ptrace already holds a task_struct for the duration of ptrace operations,
- * but since destruction is deferred, it may be executed after both
- * tracer and tracee exited.
- */
-struct bts_context {
-	/* The branch trace handle. */
-	struct bts_tracer	*tracer;
-
-	/* The buffer used to store the branch trace and its size. */
-	void			*buffer;
-	unsigned int		size;
-
-	/* The mm that paid for the above buffer. */
-	struct mm_struct	*mm;
-
-	/* The task this context belongs to. */
-	struct task_struct	*task;
-
-	/* The signal to send on a bts buffer overflow. */
-	unsigned int		bts_ovfl_signal;
-
-	/* The work struct to destroy a context. */
-	struct work_struct	work;
-};
-
-static int alloc_bts_buffer(struct bts_context *context, unsigned int size)
-{
-	void *buffer = NULL;
-	int err = -ENOMEM;
-
-	err = account_locked_memory(current->mm, current->signal->rlim, size);
-	if (err < 0)
-		return err;
-
-	buffer = kzalloc(size, GFP_KERNEL);
-	if (!buffer)
-		goto out_refund;
-
-	context->buffer = buffer;
-	context->size = size;
-	context->mm = get_task_mm(current);
-
-	return 0;
-
- out_refund:
-	refund_locked_memory(current->mm, size);
-	return err;
-}
-
-static inline void free_bts_buffer(struct bts_context *context)
-{
-	if (!context->buffer)
-		return;
-
-	kfree(context->buffer);
-	context->buffer = NULL;
-
-	refund_locked_memory(context->mm, context->size);
-	context->size = 0;
-
-	mmput(context->mm);
-	context->mm = NULL;
-}
-
-static void free_bts_context_work(struct work_struct *w)
-{
-	struct bts_context *context;
-
-	context = container_of(w, struct bts_context, work);
-
-	ds_release_bts(context->tracer);
-	put_task_struct(context->task);
-	free_bts_buffer(context);
-	kfree(context);
-}
-
-static inline void free_bts_context(struct bts_context *context)
-{
-	INIT_WORK(&context->work, free_bts_context_work);
-	schedule_work(&context->work);
-}
-
-static inline struct bts_context *alloc_bts_context(struct task_struct *task)
-{
-	struct bts_context *context = kzalloc(sizeof(*context), GFP_KERNEL);
-	if (context) {
-		context->task = task;
-		task->bts = context;
-
-		get_task_struct(task);
-	}
-
-	return context;
-}
-
-static int ptrace_bts_read_record(struct task_struct *child, size_t index,
-				  struct bts_struct __user *out)
-{
-	struct bts_context *context;
-	const struct bts_trace *trace;
-	struct bts_struct bts;
-	const unsigned char *at;
-	int error;
-
-	context = child->bts;
-	if (!context)
-		return -ESRCH;
-
-	trace = ds_read_bts(context->tracer);
-	if (!trace)
-		return -ESRCH;
-
-	at = trace->ds.top - ((index + 1) * trace->ds.size);
-	if ((void *)at < trace->ds.begin)
-		at += (trace->ds.n * trace->ds.size);
-
-	if (!trace->read)
-		return -EOPNOTSUPP;
-
-	error = trace->read(context->tracer, at, &bts);
-	if (error < 0)
-		return error;
-
-	if (copy_to_user(out, &bts, sizeof(bts)))
-		return -EFAULT;
-
-	return sizeof(bts);
-}
-
-static int ptrace_bts_drain(struct task_struct *child,
-			    long size,
-			    struct bts_struct __user *out)
-{
-	struct bts_context *context;
-	const struct bts_trace *trace;
-	const unsigned char *at;
-	int error, drained = 0;
-
-	context = child->bts;
-	if (!context)
-		return -ESRCH;
-
-	trace = ds_read_bts(context->tracer);
-	if (!trace)
-		return -ESRCH;
-
-	if (!trace->read)
-		return -EOPNOTSUPP;
-
-	if (size < (trace->ds.top - trace->ds.begin))
-		return -EIO;
-
-	for (at = trace->ds.begin; (void *)at < trace->ds.top;
-	     out++, drained++, at += trace->ds.size) {
-		struct bts_struct bts;
-
-		error = trace->read(context->tracer, at, &bts);
-		if (error < 0)
-			return error;
-
-		if (copy_to_user(out, &bts, sizeof(bts)))
-			return -EFAULT;
-	}
-
-	memset(trace->ds.begin, 0, trace->ds.n * trace->ds.size);
-
-	error = ds_reset_bts(context->tracer);
-	if (error < 0)
-		return error;
-
-	return drained;
-}
-
-static int ptrace_bts_config(struct task_struct *child,
-			     long cfg_size,
-			     const struct ptrace_bts_config __user *ucfg)
-{
-	struct bts_context *context;
-	struct ptrace_bts_config cfg;
-	unsigned int flags = 0;
-
-	if (cfg_size < sizeof(cfg))
-		return -EIO;
-
-	if (copy_from_user(&cfg, ucfg, sizeof(cfg)))
-		return -EFAULT;
-
-	context = child->bts;
-	if (!context)
-		context = alloc_bts_context(child);
-	if (!context)
-		return -ENOMEM;
-
-	if (cfg.flags & PTRACE_BTS_O_SIGNAL) {
-		if (!cfg.signal)
-			return -EINVAL;
-
-		return -EOPNOTSUPP;
-		context->bts_ovfl_signal = cfg.signal;
-	}
-
-	ds_release_bts(context->tracer);
-	context->tracer = NULL;
-
-	if ((cfg.flags & PTRACE_BTS_O_ALLOC) && (cfg.size != context->size)) {
-		int err;
-
-		free_bts_buffer(context);
-		if (!cfg.size)
-			return 0;
-
-		err = alloc_bts_buffer(context, cfg.size);
-		if (err < 0)
-			return err;
-	}
-
-	if (cfg.flags & PTRACE_BTS_O_TRACE)
-		flags |= BTS_USER;
-
-	if (cfg.flags & PTRACE_BTS_O_SCHED)
-		flags |= BTS_TIMESTAMPS;
-
-	context->tracer =
-		ds_request_bts_task(child, context->buffer, context->size,
-				    NULL, (size_t)-1, flags);
-	if (unlikely(IS_ERR(context->tracer))) {
-		int error = PTR_ERR(context->tracer);
-
-		free_bts_buffer(context);
-		context->tracer = NULL;
-		return error;
-	}
-
-	return sizeof(cfg);
-}
-
-static int ptrace_bts_status(struct task_struct *child,
-			     long cfg_size,
-			     struct ptrace_bts_config __user *ucfg)
-{
-	struct bts_context *context;
-	const struct bts_trace *trace;
-	struct ptrace_bts_config cfg;
-
-	context = child->bts;
-	if (!context)
-		return -ESRCH;
-
-	if (cfg_size < sizeof(cfg))
-		return -EIO;
-
-	trace = ds_read_bts(context->tracer);
-	if (!trace)
-		return -ESRCH;
-
-	memset(&cfg, 0, sizeof(cfg));
-	cfg.size	= trace->ds.end - trace->ds.begin;
-	cfg.signal	= context->bts_ovfl_signal;
-	cfg.bts_size	= sizeof(struct bts_struct);
-
-	if (cfg.signal)
-		cfg.flags |= PTRACE_BTS_O_SIGNAL;
-
-	if (trace->ds.flags & BTS_USER)
-		cfg.flags |= PTRACE_BTS_O_TRACE;
-
-	if (trace->ds.flags & BTS_TIMESTAMPS)
-		cfg.flags |= PTRACE_BTS_O_SCHED;
-
-	if (copy_to_user(ucfg, &cfg, sizeof(cfg)))
-		return -EFAULT;
-
-	return sizeof(cfg);
-}
-
-static int ptrace_bts_clear(struct task_struct *child)
-{
-	struct bts_context *context;
-	const struct bts_trace *trace;
-
-	context = child->bts;
-	if (!context)
-		return -ESRCH;
-
-	trace = ds_read_bts(context->tracer);
-	if (!trace)
-		return -ESRCH;
-
-	memset(trace->ds.begin, 0, trace->ds.n * trace->ds.size);
-
-	return ds_reset_bts(context->tracer);
-}
-
-static int ptrace_bts_size(struct task_struct *child)
-{
-	struct bts_context *context;
-	const struct bts_trace *trace;
-
-	context = child->bts;
-	if (!context)
-		return -ESRCH;
-
-	trace = ds_read_bts(context->tracer);
-	if (!trace)
-		return -ESRCH;
-
-	return (trace->ds.top - trace->ds.begin) / trace->ds.size;
-}
-
-/*
- * Called from __ptrace_unlink() after the child has been moved back
- * to its original parent.
- */
-void ptrace_bts_untrace(struct task_struct *child)
-{
-	if (unlikely(child->bts)) {
-		free_bts_context(child->bts);
-		child->bts = NULL;
-	}
-}
-#endif /* CONFIG_X86_PTRACE_BTS */
-
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -1271,39 +911,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 #endif
 
-	/*
-	 * These bits need more cooking - not enabled yet:
-	 */
-#ifdef CONFIG_X86_PTRACE_BTS
-	case PTRACE_BTS_CONFIG:
-		ret = ptrace_bts_config
-			(child, data, (struct ptrace_bts_config __user *)addr);
-		break;
-
-	case PTRACE_BTS_STATUS:
-		ret = ptrace_bts_status
-			(child, data, (struct ptrace_bts_config __user *)addr);
-		break;
-
-	case PTRACE_BTS_SIZE:
-		ret = ptrace_bts_size(child);
-		break;
-
-	case PTRACE_BTS_GET:
-		ret = ptrace_bts_read_record
-			(child, data, (struct bts_struct __user *) addr);
-		break;
-
-	case PTRACE_BTS_CLEAR:
-		ret = ptrace_bts_clear(child);
-		break;
-
-	case PTRACE_BTS_DRAIN:
-		ret = ptrace_bts_drain
-			(child, data, (struct bts_struct __user *) addr);
-		break;
-#endif /* CONFIG_X86_PTRACE_BTS */
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -1563,14 +1170,6 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 	case PTRACE_GET_THREAD_AREA:
 	case PTRACE_SET_THREAD_AREA:
-#ifdef CONFIG_X86_PTRACE_BTS
-	case PTRACE_BTS_CONFIG:
-	case PTRACE_BTS_STATUS:
-	case PTRACE_BTS_SIZE:
-	case PTRACE_BTS_GET:
-	case PTRACE_BTS_CLEAR:
-	case PTRACE_BTS_DRAIN:
-#endif /* CONFIG_X86_PTRACE_BTS */
 		return arch_ptrace(child, request, addr, data);
 
 	default:
@@ -1584,7 +1183,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 #ifdef CONFIG_X86_64
 
-static const struct user_regset x86_64_regsets[] = {
+static struct user_regset x86_64_regsets[] __read_mostly = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
 		.n = sizeof(struct user_regs_struct) / sizeof(long),
@@ -1597,6 +1196,12 @@ static const struct user_regset x86_64_regsets[] = {
 		.size = sizeof(long), .align = sizeof(long),
 		.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
 	},
+	[REGSET_XSTATE] = {
+		.core_note_type = NT_X86_XSTATE,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = xstateregs_active, .get = xstateregs_get,
+		.set = xstateregs_set
+	},
 	[REGSET_IOPERM64] = {
 		.core_note_type = NT_386_IOPERM,
 		.n = IO_BITMAP_LONGS,
@@ -1622,7 +1227,7 @@ static const struct user_regset_view user_x86_64_view = {
 #endif	/* CONFIG_X86_64 */
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
-static const struct user_regset x86_32_regsets[] = {
+static struct user_regset x86_32_regsets[] __read_mostly = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
 		.n = sizeof(struct user_regs_struct32) / sizeof(u32),
@@ -1641,6 +1246,12 @@ static const struct user_regset x86_32_regsets[] = {
 		.size = sizeof(u32), .align = sizeof(u32),
 		.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
 	},
+	[REGSET_XSTATE] = {
+		.core_note_type = NT_X86_XSTATE,
+		.size = sizeof(u64), .align = sizeof(u64),
+		.active = xstateregs_active, .get = xstateregs_get,
+		.set = xstateregs_set
+	},
 	[REGSET_TLS] = {
 		.core_note_type = NT_386_TLS,
 		.n = GDT_ENTRY_TLS_ENTRIES, .bias = GDT_ENTRY_TLS_MIN,
@@ -1663,6 +1274,23 @@ static const struct user_regset_view user_x86_32_view = {
 };
 #endif
 
+/*
+ * This represents bytes 464..511 in the memory layout exported through
+ * the REGSET_XSTATE interface.
+ */
+u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
+
+void update_regset_xstate_info(unsigned int size, u64 xstate_mask)
+{
+#ifdef CONFIG_X86_64
+	x86_64_regsets[REGSET_XSTATE].n = size / sizeof(u64);
+#endif
+#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
+	x86_32_regsets[REGSET_XSTATE].n = size / sizeof(u64);
+#endif
+	xstate_fx_sw_bytes[USER_XSTATE_XCR0_WORD] = xstate_mask;
+}
+
 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 {
 #ifdef CONFIG_IA32_EMULATION
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 03801f2..239427c 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -31,8 +31,16 @@ struct pvclock_shadow_time {
 	u32 tsc_to_nsec_mul;
 	int tsc_shift;
 	u32 version;
+	u8  flags;
 };
 
+static u8 valid_flags __read_mostly = 0;
+
+void pvclock_set_flags(u8 flags)
+{
+	valid_flags = flags;
+}
+
 /*
  * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
  * yielding a 64-bit result.
@@ -91,6 +99,7 @@ static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst,
 		dst->system_timestamp  = src->system_time;
 		dst->tsc_to_nsec_mul   = src->tsc_to_system_mul;
 		dst->tsc_shift         = src->tsc_shift;
+		dst->flags             = src->flags;
 		rmb();		/* test version after fetching data */
 	} while ((src->version & 1) || (dst->version != src->version));
 
@@ -109,11 +118,14 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
 	return pv_tsc_khz;
 }
 
+static atomic64_t last_value = ATOMIC64_INIT(0);
+
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 {
 	struct pvclock_shadow_time shadow;
 	unsigned version;
 	cycle_t ret, offset;
+	u64 last;
 
 	do {
 		version = pvclock_get_time_values(&shadow, src);
@@ -123,6 +135,31 @@ cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 		barrier();
 	} while (version != src->version);
 
+	if ((valid_flags & PVCLOCK_TSC_STABLE_BIT) &&
+		(shadow.flags & PVCLOCK_TSC_STABLE_BIT))
+		return ret;
+
+	/*
+	 * Assumption here is that last_value, a global accumulator, always goes
+	 * forward. If we are less than that, we should not be much smaller.
+	 * We assume there is an error marging we're inside, and then the correction
+	 * does not sacrifice accuracy.
+	 *
+	 * For reads: global may have changed between test and return,
+	 * but this means someone else updated poked the clock at a later time.
+	 * We just need to make sure we are not seeing a backwards event.
+	 *
+	 * For updates: last_value = ret is not enough, since two vcpus could be
+	 * updating at the same time, and one of them could be slightly behind,
+	 * making the assumption that last_value always go forward fail to hold.
+	 */
+	last = atomic64_read(&last_value);
+	do {
+		if (ret < last)
+			return last;
+		last = atomic64_cmpxchg(&last_value, last, ret);
+	} while (unlikely(last != ret));
+
 	return ret;
 }
 
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 12e9fea..939b9e9 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -495,6 +495,9 @@ void force_hpet_resume(void)
 /*
  * HPET MSI on some boards (ATI SB700/SB800) has side effect on
  * floppy DMA. Disable HPET MSI on such platforms.
+ * See erratum #27 (Misinterpreted MSI Requests May Result in
+ * Corrupted LPC DMA Data) in AMD Publication #46837,
+ * "SB700 Family Product Errata", Rev. 1.0, March 2010.
  */
 static void force_disable_hpet_msi(struct pci_dev *unused)
 {
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 1545bc0..e3af342 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -203,6 +203,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 760",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
+			DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
+		},
+	},
 	{	/* Handle problems with rebooting on Dell 2400's */
 		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 2400",
@@ -219,6 +228,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T7400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
@@ -452,6 +469,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
 		},
 	},
+	{	/* Handle problems with rebooting on the iMac9,1. */
+		.callback = set_pci_reboot,
+		.ident = "Apple iMac9,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f7b8b98..b4ae4ac 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -55,7 +55,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
 
@@ -121,7 +120,9 @@
 unsigned long max_low_pfn_mapped;
 unsigned long max_pfn_mapped;
 
+#ifdef CONFIG_DMI
 RESERVE_BRK(dmi_alloc, 65536);
+#endif
 
 unsigned int boot_cpu_id __read_mostly;
 
@@ -312,16 +313,17 @@ static void __init reserve_brk(void)
 #define MAX_MAP_CHUNK	(NR_FIX_BTMAPS << PAGE_SHIFT)
 static void __init relocate_initrd(void)
 {
-
+	/* Assume only end is not page aligned */
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
+	u64 area_size     = PAGE_ALIGN(ramdisk_size);
 	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 	u64 ramdisk_here;
 	unsigned long slop, clen, mapaddr;
 	char *p, *q;
 
 	/* We need to move the initrd down into lowmem */
-	ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+	ramdisk_here = find_e820_area(0, end_of_lowmem, area_size,
 					 PAGE_SIZE);
 
 	if (ramdisk_here == -1ULL)
@@ -330,7 +332,7 @@ static void __init relocate_initrd(void)
 
 	/* Note: this includes all the lowmem currently occupied by
 	   the initrd, we rely on that fact to keep the data intact. */
-	reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+	reserve_early(ramdisk_here, ramdisk_here + area_size,
 			 "NEW RAMDISK");
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
@@ -374,9 +376,10 @@ static void __init relocate_initrd(void)
 
 static void __init reserve_initrd(void)
 {
+	/* Assume only end is not page aligned */
 	u64 ramdisk_image = boot_params.hdr.ramdisk_image;
 	u64 ramdisk_size  = boot_params.hdr.ramdisk_size;
-	u64 ramdisk_end   = ramdisk_image + ramdisk_size;
+	u64 ramdisk_end   = PAGE_ALIGN(ramdisk_image + ramdisk_size);
 	u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
 
 	if (!boot_params.hdr.type_of_loader ||
@@ -604,6 +607,16 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static __init void reserve_ibft_region(void)
+{
+	unsigned long addr, size = 0;
+
+	addr = find_ibft_region(&size);
+
+	if (size)
+		reserve_early_overlap_ok(addr, addr + size, "ibft");
+}
+
 #ifdef CONFIG_X86_RESERVE_LOW_64K
 static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
 {
@@ -642,23 +655,59 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
 		},
 	},
-	{
 	/*
-	 * AMI BIOS with low memory corruption was found on Intel DG45ID board.
-	 * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+	 * AMI BIOS with low memory corruption was found on Intel DG45ID and
+	 * DG45FC boards.
+	 * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
 	 * match only DMI_BOARD_NAME and see if there is more bad products
 	 * with this vendor.
 	 */
+	{
 		.callback = dmi_low_memory_corruption,
 		.ident = "AMI BIOS",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
 		},
 	},
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
+		},
+	},
+	/*
+	 * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so
+	 * match on the product name.
+	 */
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "Phoenix BIOS",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+		},
+	},
 #endif
 	{}
 };
 
+static void __init trim_bios_range(void)
+{
+	/*
+	 * A special case is the first 4Kb of memory;
+	 * This is a BIOS owned area, not kernel ram, but generally
+	 * not listed as such in the E820 table.
+	 */
+	e820_update_range(0, PAGE_SIZE, E820_RAM, E820_RESERVED);
+	/*
+	 * special case: Some BIOSen report the PC BIOS
+	 * area (640->1Mb) as ram even though it is not.
+	 * take them out.
+	 */
+	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -687,6 +736,7 @@ void __init setup_arch(char **cmdline_p)
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
 	vmi_init();
 
+	early_trap_init();
 	early_cpu_init();
 	early_ioremap_init();
 
@@ -822,7 +872,7 @@ void __init setup_arch(char **cmdline_p)
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
 
-
+	trim_bios_range();
 #ifdef CONFIG_X86_32
 	if (ppro_with_ram_bug()) {
 		e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
@@ -881,6 +931,8 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	find_smp_config();
 
+	reserve_ibft_region();
+
 	reserve_trampoline_memory();
 
 #ifdef CONFIG_ACPI_SLEEP
@@ -942,17 +994,11 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	initmem_init(0, max_pfn, acpi, k8);
-
-#ifdef CONFIG_X86_64
-	/*
-	 * dma32_reserve_bootmem() allocates bootmem which may conflict
-	 * with the crashkernel command line, so do that after
-	 * reserve_crashkernel()
-	 */
-	dma32_reserve_bootmem();
+#ifndef CONFIG_NO_BOOTMEM
+	early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
 #endif
 
-	reserve_ibft_region();
+	dma32_reserve_bootmem();
 
 #ifdef CONFIG_KVM_CLOCK
 	kvmclock_init();
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 8c9f68e..a60df9a 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -21,12 +21,6 @@
 #include <asm/cpu.h>
 #include <asm/stackprotector.h>
 
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__)
-#else
-# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0)
-#endif
-
 DEFINE_PER_CPU(int, cpu_number);
 EXPORT_PER_CPU_SYMBOL(cpu_number);
 
@@ -137,7 +131,13 @@ static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 
 static void __init pcpu_fc_free(void *ptr, size_t size)
 {
+#ifdef CONFIG_NO_BOOTMEM
+	u64 start = __pa(ptr);
+	u64 end = start + size;
+	free_early_partial(start, end);
+#else
 	free_bootmem(__pa(ptr), size);
+#endif
 }
 
 static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
@@ -238,6 +238,15 @@ void __init setup_per_cpu_areas(void)
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
 			early_per_cpu_map(x86_cpu_to_node_map, cpu);
+		/*
+		 * Ensure that the boot cpu numa_node is correct when the boot
+		 * cpu is on a node that doesn't have memory installed.
+		 * Also cpu_up() will call cpu_to_node() for APs when
+		 * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
+		 * up later with c_init aka intel_init/amd_init.
+		 * So set them all (boot cpu and all APs).
+		 */
+		set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
 #endif
 #endif
 		/*
@@ -257,14 +266,6 @@ void __init setup_per_cpu_areas(void)
 	early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
-	/*
-	 * make sure boot cpu node_number is right, when boot cpu is on the
-	 * node that doesn't have mem installed
-	 */
-	per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id);
-#endif
-
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
 
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 34e0993..cb22acf 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -81,7 +81,6 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
-static u32 gsi_base;
 
 static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 {
@@ -94,8 +93,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_base);
-		gsi_base += io_apic_get_redir_entries(i);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top);
 		pentry++;
 	}
 
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index ec1de97..d801210 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -21,6 +21,7 @@
 #include <linux/cache.h>
 #include <linux/interrupt.h>
 #include <linux/cpu.h>
+#include <linux/gfp.h>
 
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 678d0b8..c4f33b2 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -48,6 +48,8 @@
 #include <linux/err.h>
 #include <linux/nmi.h>
 #include <linux/tboot.h>
+#include <linux/stackprotector.h>
+#include <linux/gfp.h>
 
 #include <asm/acpi.h>
 #include <asm/desc.h>
@@ -67,6 +69,7 @@
 #include <linux/mc146818rtc.h>
 
 #include <asm/smpboot_hooks.h>
+#include <asm/i8259.h>
 
 #ifdef CONFIG_X86_32
 u8 apicid_2_node[MAX_APICID];
@@ -240,7 +243,10 @@ static void __cpuinit smp_callin(void)
 	end_local_APIC_setup();
 	map_cpu_to_logical_apicid();
 
-	notify_cpu_starting(cpuid);
+	/*
+	 * Need to setup vector mappings before we enable interrupts.
+	 */
+	setup_vector_irq(smp_processor_id());
 	/*
 	 * Get our bogomips.
 	 *
@@ -257,6 +263,8 @@ static void __cpuinit smp_callin(void)
 	 */
 	smp_store_cpu_info(cpuid);
 
+	notify_cpu_starting(cpuid);
+
 	/*
 	 * Allow the master to continue.
 	 */
@@ -286,9 +294,9 @@ notrace static void __cpuinit start_secondary(void *unused)
 	check_tsc_sync_target();
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		disable_8259A_irq(0);
+		legacy_pic->chip->mask(0);
 		enable_NMI_through_LVT0();
-		enable_8259A_irq(0);
+		legacy_pic->chip->unmask(0);
 	}
 
 #ifdef CONFIG_X86_32
@@ -315,15 +323,18 @@ notrace static void __cpuinit start_secondary(void *unused)
 	 */
 	ipi_call_lock();
 	lock_vector_lock();
-	__setup_vector_irq(smp_processor_id());
 	set_cpu_online(smp_processor_id(), true);
 	unlock_vector_lock();
 	ipi_call_unlock();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+	x86_platform.nmi_init();
 
 	/* enable local interrupts */
 	local_irq_enable();
 
+	/* to prevent fake stack check failure in clock setup */
+	boot_init_stack_canary();
+
 	x86_cpuinit.setup_percpu_clockev();
 
 	wmb();
@@ -675,7 +686,7 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
 static void __cpuinit announce_cpu(int cpu, int apicid)
 {
 	static int current_node = -1;
-	int node = cpu_to_node(cpu);
+	int node = early_cpu_to_node(cpu);
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (node != current_node) {
@@ -1083,9 +1094,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	set_cpu_sibling_map(0);
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
@@ -1206,18 +1215,37 @@ __init void prefill_possible_map(void)
 	if (!num_processors)
 		num_processors = 1;
 
-	if (setup_possible_cpus == -1)
-		possible = num_processors + disabled_cpus;
-	else
+	i = setup_max_cpus ?: 1;
+	if (setup_possible_cpus == -1) {
+		possible = num_processors;
+#ifdef CONFIG_HOTPLUG_CPU
+		if (setup_max_cpus)
+			possible += disabled_cpus;
+#else
+		if (possible > i)
+			possible = i;
+#endif
+	} else
 		possible = setup_possible_cpus;
 
 	total_cpus = max_t(int, possible, num_processors + disabled_cpus);
 
-	if (possible > CONFIG_NR_CPUS) {
+	/* nr_cpu_ids could be reduced via nr_cpus= */
+	if (possible > nr_cpu_ids) {
 		printk(KERN_WARNING
 			"%d Processors exceeds NR_CPUS limit of %d\n",
-			possible, CONFIG_NR_CPUS);
-		possible = CONFIG_NR_CPUS;
+			possible, nr_cpu_ids);
+		possible = nr_cpu_ids;
+	}
+
+#ifdef CONFIG_HOTPLUG_CPU
+	if (!setup_max_cpus)
+#endif
+	if (possible > i) {
+		printk(KERN_WARNING
+			"%d Processors exceeds max_cpus limit of %u\n",
+			possible, setup_max_cpus);
+		possible = i;
 	}
 
 	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
@@ -1225,6 +1253,8 @@ __init void prefill_possible_map(void)
 
 	for (i = 0; i < possible; i++)
 		set_cpu_possible(i, true);
+	for (; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
 
 	nr_cpu_ids = possible;
 }
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 3149032..58de45e 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -158,22 +158,6 @@ static int enable_single_step(struct task_struct *child)
 }
 
 /*
- * Install this value in MSR_IA32_DEBUGCTLMSR whenever child is running.
- */
-static void write_debugctlmsr(struct task_struct *child, unsigned long val)
-{
-	if (child->thread.debugctlmsr == val)
-		return;
-
-	child->thread.debugctlmsr = val;
-
-	if (child != current)
-		return;
-
-	update_debugctlmsr(val);
-}
-
-/*
  * Enable single or block step.
  */
 static void enable_step(struct task_struct *child, bool block)
@@ -186,15 +170,17 @@ static void enable_step(struct task_struct *child, bool block)
 	 * that uses user-mode single stepping itself.
 	 */
 	if (enable_single_step(child) && block) {
-		set_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
-		write_debugctlmsr(child,
-				  child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
-	} else {
-		write_debugctlmsr(child,
-				  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
-
-		if (!child->thread.debugctlmsr)
-			clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+		unsigned long debugctl = get_debugctlmsr();
+
+		debugctl |= DEBUGCTLMSR_BTF;
+		update_debugctlmsr(debugctl);
+		set_tsk_thread_flag(child, TIF_BLOCKSTEP);
+	} else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
+		unsigned long debugctl = get_debugctlmsr();
+
+		debugctl &= ~DEBUGCTLMSR_BTF;
+		update_debugctlmsr(debugctl);
+		clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
 	}
 }
 
@@ -213,11 +199,13 @@ void user_disable_single_step(struct task_struct *child)
 	/*
 	 * Make sure block stepping (BTF) is disabled.
 	 */
-	write_debugctlmsr(child,
-			  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
+	if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) {
+		unsigned long debugctl = get_debugctlmsr();
 
-	if (!child->thread.debugctlmsr)
-		clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+		debugctl &= ~DEBUGCTLMSR_BTF;
+		update_debugctlmsr(debugctl);
+		clear_tsk_thread_flag(child, TIF_BLOCKSTEP);
+	}
 
 	/* Always clear TIF_SINGLESTEP... */
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index dee1ff7..196552b 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -25,191 +25,6 @@
 #include <asm/syscalls.h>
 
 /*
- * Perform the select(nd, in, out, ex, tv) and mmap() system
- * calls. Linux/i386 didn't use to be able to handle more than
- * 4 system call parameters, so these system calls used a memory
- * block for parameter passing..
- */
-
-struct mmap_arg_struct {
-	unsigned long addr;
-	unsigned long len;
-	unsigned long prot;
-	unsigned long flags;
-	unsigned long fd;
-	unsigned long offset;
-};
-
-asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
-{
-	struct mmap_arg_struct a;
-	int err = -EFAULT;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	err = -EINVAL;
-	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags,
-			a.fd, a.offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-
-struct sel_arg_struct {
-	unsigned long n;
-	fd_set __user *inp, *outp, *exp;
-	struct timeval __user *tvp;
-};
-
-asmlinkage int old_select(struct sel_arg_struct __user *arg)
-{
-	struct sel_arg_struct a;
-
-	if (copy_from_user(&a, arg, sizeof(a)))
-		return -EFAULT;
-	/* sys_select() does the appropriate kernel locking */
-	return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
-}
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-asmlinkage int sys_ipc(uint call, int first, int second,
-			int third, void __user *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	switch (call) {
-	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
-	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
-					(const struct timespec __user *)fifth);
-
-	case SEMGET:
-		return sys_semget(first, second, third);
-	case SEMCTL: {
-		union semun fourth;
-		if (!ptr)
-			return -EINVAL;
-		if (get_user(fourth.__pad, (void __user * __user *) ptr))
-			return -EFAULT;
-		return sys_semctl(first, second, third, fourth);
-	}
-
-	case MSGSND:
-		return sys_msgsnd(first, (struct msgbuf __user *) ptr,
-				   second, third);
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-			if (!ptr)
-				return -EINVAL;
-
-			if (copy_from_user(&tmp,
-					   (struct ipc_kludge __user *) ptr,
-					   sizeof(tmp)))
-				return -EFAULT;
-			return sys_msgrcv(first, tmp.msgp, second,
-					   tmp.msgtyp, third);
-		}
-		default:
-			return sys_msgrcv(first,
-					   (struct msgbuf __user *) ptr,
-					   second, fifth, third);
-		}
-	case MSGGET:
-		return sys_msgget((key_t) first, second);
-	case MSGCTL:
-		return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
-
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = do_shmat(first, (char __user *) ptr, second, &raddr);
-			if (ret)
-				return ret;
-			return put_user(raddr, (ulong __user *) third);
-		}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				return -EINVAL;
-			/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
-			return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
-		}
-	case SHMDT:
-		return sys_shmdt((char __user *)ptr);
-	case SHMGET:
-		return sys_shmget(first, second, third);
-	case SHMCTL:
-		return sys_shmctl(first, second,
-				   (struct shmid_ds __user *) ptr);
-	default:
-		return -ENOSYS;
-	}
-}
-
-/*
- * Old cruft
- */
-asmlinkage int sys_uname(struct old_utsname __user *name)
-{
-	int err;
-	if (!name)
-		return -EFAULT;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	return err? -EFAULT:0;
-}
-
-asmlinkage int sys_olduname(struct oldold_utsname __user *name)
-{
-	int error;
-
-	if (!name)
-		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
-
-	down_read(&uts_sem);
-
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
-	up_read(&uts_sem);
-
-	error = error ? -EFAULT : 0;
-
-	return error;
-}
-
-
-/*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
  */
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 8aa2057..ff14a50 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -209,15 +209,3 @@ bottomup:
 
 	return addr;
 }
-
-
-SYSCALL_DEFINE1(uname, struct new_utsname __user *, name)
-{
-	int err;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof(*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32)
-		err |= copy_to_user(&name->machine, "i686", 5);
-	return err ? -EFAULT : 0;
-}
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 15228b5..8b37293 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -81,7 +81,7 @@ ENTRY(sys_call_table)
 	.long sys_settimeofday
 	.long sys_getgroups16	/* 80 */
 	.long sys_setgroups16
-	.long old_select
+	.long sys_old_select
 	.long sys_symlink
 	.long sys_lstat
 	.long sys_readlink	/* 85 */
@@ -89,7 +89,7 @@ ENTRY(sys_call_table)
 	.long sys_swapon
 	.long sys_reboot
 	.long sys_old_readdir
-	.long old_mmap		/* 90 */
+	.long sys_old_mmap	/* 90 */
 	.long sys_munmap
 	.long sys_truncate
 	.long sys_ftruncate
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 86c9f91..c2f1b26 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -46,6 +46,7 @@
 
 /* Global pointer to shared data; NULL means no measured launch. */
 struct tboot *tboot __read_mostly;
+EXPORT_SYMBOL(tboot);
 
 /* timeout for APs (in secs) to enter wait-for-SIPI state during shutdown */
 #define AP_WAIT_TIMEOUT		1
@@ -175,6 +176,9 @@ static void add_mac_region(phys_addr_t start, unsigned long size)
 	struct tboot_mac_region *mr;
 	phys_addr_t end = start + size;
 
+	if (tboot->num_mac_regions >= MAX_TB_MAC_REGIONS)
+		panic("tboot: Too many MAC regions\n");
+
 	if (start && size) {
 		mr = &tboot->mac_regions[tboot->num_mac_regions++];
 		mr->start = round_down(start, PAGE_SIZE);
@@ -184,18 +188,17 @@ static void add_mac_region(phys_addr_t start, unsigned long size)
 
 static int tboot_setup_sleep(void)
 {
+	int i;
+
 	tboot->num_mac_regions = 0;
 
-	/* S3 resume code */
-	add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
+	for (i = 0; i < e820.nr_map; i++) {
+		if ((e820.map[i].type != E820_RAM)
+		 && (e820.map[i].type != E820_RESERVED_KERN))
+			continue;
 
-#ifdef CONFIG_X86_TRAMPOLINE
-	/* AP trampoline code */
-	add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
-#endif
-
-	/* kernel code + data + bss */
-	add_mac_region(virt_to_phys(_text), _end - _text);
+		add_mac_region(e820.map[i].addr, e820.map[i].size);
+	}
 
 	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
 
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index be25734..fb5cc5e1 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -70,11 +70,11 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 		 * manually to deassert NMI lines for the watchdog if run
 		 * on an 82489DX-based system.
 		 */
-		spin_lock(&i8259A_lock);
+		raw_spin_lock(&i8259A_lock);
 		outb(0x0c, PIC_MASTER_OCW3);
 		/* Ack the IRQ; AEOI will end it automatically. */
 		inb(PIC_MASTER_POLL);
-		spin_unlock(&i8259A_lock);
+		raw_spin_unlock(&i8259A_lock);
 	}
 
 	global_clock_event->event_handler(global_clock_event);
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 364d015ef..7fea555 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -1,7 +1,7 @@
 /*
  *	SGI UltraViolet TLB flush routines.
  *
- *	(c) 2008 Cliff Wickman <cpw@sgi.com>, SGI.
+ *	(c) 2008-2010 Cliff Wickman <cpw@sgi.com>, SGI.
  *
  *	This code is released under the GNU General Public License version 2 or
  *	later.
@@ -9,6 +9,7 @@
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 
 #include <asm/mmu_context.h>
 #include <asm/uv/uv.h>
@@ -19,42 +20,67 @@
 #include <asm/idle.h>
 #include <asm/tsc.h>
 #include <asm/irq_vectors.h>
+#include <asm/timer.h>
 
-static struct bau_control	**uv_bau_table_bases __read_mostly;
-static int			uv_bau_retry_limit __read_mostly;
+struct msg_desc {
+	struct bau_payload_queue_entry *msg;
+	int msg_slot;
+	int sw_ack_slot;
+	struct bau_payload_queue_entry *va_queue_first;
+	struct bau_payload_queue_entry *va_queue_last;
+};
 
-/* base pnode in this partition */
-static int			uv_partition_base_pnode __read_mostly;
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	0x000000000bUL
+
+static int uv_bau_max_concurrent __read_mostly;
+
+static int nobau;
+static int __init setup_nobau(char *arg)
+{
+	nobau = 1;
+	return 0;
+}
+early_param("nobau", setup_nobau);
 
-static unsigned long		uv_mmask __read_mostly;
+/* base pnode in this partition */
+static int uv_partition_base_pnode __read_mostly;
+/* position of pnode (which is nasid>>1): */
+static int uv_nshift __read_mostly;
+static unsigned long uv_mmask __read_mostly;
 
 static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
 static DEFINE_PER_CPU(struct bau_control, bau_control);
+static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
+
+struct reset_args {
+	int sender;
+};
 
 /*
- * Determine the first node on a blade.
+ * Determine the first node on a uvhub. 'Nodes' are used for kernel
+ * memory allocation.
  */
-static int __init blade_to_first_node(int blade)
+static int __init uvhub_to_first_node(int uvhub)
 {
 	int node, b;
 
 	for_each_online_node(node) {
 		b = uv_node_to_blade_id(node);
-		if (blade == b)
+		if (uvhub == b)
 			return node;
 	}
-	return -1; /* shouldn't happen */
+	return -1;
 }
 
 /*
- * Determine the apicid of the first cpu on a blade.
+ * Determine the apicid of the first cpu on a uvhub.
  */
-static int __init blade_to_first_apicid(int blade)
+static int __init uvhub_to_first_apicid(int uvhub)
 {
 	int cpu;
 
 	for_each_present_cpu(cpu)
-		if (blade == uv_cpu_to_blade_id(cpu))
+		if (uvhub == uv_cpu_to_blade_id(cpu))
 			return per_cpu(x86_cpu_to_apicid, cpu);
 	return -1;
 }
@@ -67,195 +93,459 @@ static int __init blade_to_first_apicid(int blade)
  * clear of the Timeout bit (as well) will free the resource. No reply will
  * be sent (the hardware will only do one reply per message).
  */
-static void uv_reply_to_message(int resource,
-				struct bau_payload_queue_entry *msg,
-				struct bau_msg_status *msp)
+static inline void uv_reply_to_message(struct msg_desc *mdp,
+				       struct bau_control *bcp)
 {
 	unsigned long dw;
+	struct bau_payload_queue_entry *msg;
 
-	dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource);
+	msg = mdp->msg;
+	if (!msg->canceled) {
+		dw = (msg->sw_ack_vector << UV_SW_ACK_NPENDING) |
+						msg->sw_ack_vector;
+		uv_write_local_mmr(
+				UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
+	}
 	msg->replied_to = 1;
 	msg->sw_ack_vector = 0;
-	if (msp)
-		msp->seen_by.bits = 0;
-	uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw);
 }
 
 /*
- * Do all the things a cpu should do for a TLB shootdown message.
- * Other cpu's may come here at the same time for this message.
+ * Process the receipt of a RETRY message
  */
-static void uv_bau_process_message(struct bau_payload_queue_entry *msg,
-				   int msg_slot, int sw_ack_slot)
+static inline void uv_bau_process_retry_msg(struct msg_desc *mdp,
+					    struct bau_control *bcp)
 {
-	unsigned long this_cpu_mask;
-	struct bau_msg_status *msp;
-	int cpu;
+	int i;
+	int cancel_count = 0;
+	int slot2;
+	unsigned long msg_res;
+	unsigned long mmr = 0;
+	struct bau_payload_queue_entry *msg;
+	struct bau_payload_queue_entry *msg2;
+	struct ptc_stats *stat;
 
-	msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
-	cpu = uv_blade_processor_id();
-	msg->number_of_cpus =
-		uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
-	this_cpu_mask = 1UL << cpu;
-	if (msp->seen_by.bits & this_cpu_mask)
-		return;
-	atomic_or_long(&msp->seen_by.bits, this_cpu_mask);
+	msg = mdp->msg;
+	stat = &per_cpu(ptcstats, bcp->cpu);
+	stat->d_retries++;
+	/*
+	 * cancel any message from msg+1 to the retry itself
+	 */
+	for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) {
+		if (msg2 > mdp->va_queue_last)
+			msg2 = mdp->va_queue_first;
+		if (msg2 == msg)
+			break;
+
+		/* same conditions for cancellation as uv_do_reset */
+		if ((msg2->replied_to == 0) && (msg2->canceled == 0) &&
+		    (msg2->sw_ack_vector) && ((msg2->sw_ack_vector &
+			msg->sw_ack_vector) == 0) &&
+		    (msg2->sending_cpu == msg->sending_cpu) &&
+		    (msg2->msg_type != MSG_NOOP)) {
+			slot2 = msg2 - mdp->va_queue_first;
+			mmr = uv_read_local_mmr
+				(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
+			msg_res = ((msg2->sw_ack_vector << 8) |
+				   msg2->sw_ack_vector);
+			/*
+			 * This is a message retry; clear the resources held
+			 * by the previous message only if they timed out.
+			 * If it has not timed out we have an unexpected
+			 * situation to report.
+			 */
+			if (mmr & (msg_res << 8)) {
+				/*
+				 * is the resource timed out?
+				 * make everyone ignore the cancelled message.
+				 */
+				msg2->canceled = 1;
+				stat->d_canceled++;
+				cancel_count++;
+				uv_write_local_mmr(
+				    UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
+					(msg_res << 8) | msg_res);
+			} else
+				printk(KERN_INFO "note bau retry: no effect\n");
+		}
+	}
+	if (!cancel_count)
+		stat->d_nocanceled++;
+}
 
-	if (msg->replied_to == 1)
-		return;
+/*
+ * Do all the things a cpu should do for a TLB shootdown message.
+ * Other cpu's may come here at the same time for this message.
+ */
+static void uv_bau_process_message(struct msg_desc *mdp,
+				   struct bau_control *bcp)
+{
+	int msg_ack_count;
+	short socket_ack_count = 0;
+	struct ptc_stats *stat;
+	struct bau_payload_queue_entry *msg;
+	struct bau_control *smaster = bcp->socket_master;
 
+	/*
+	 * This must be a normal message, or retry of a normal message
+	 */
+	msg = mdp->msg;
+	stat = &per_cpu(ptcstats, bcp->cpu);
 	if (msg->address == TLB_FLUSH_ALL) {
 		local_flush_tlb();
-		__get_cpu_var(ptcstats).alltlb++;
+		stat->d_alltlb++;
 	} else {
 		__flush_tlb_one(msg->address);
-		__get_cpu_var(ptcstats).onetlb++;
+		stat->d_onetlb++;
 	}
+	stat->d_requestee++;
+
+	/*
+	 * One cpu on each uvhub has the additional job on a RETRY
+	 * of releasing the resource held by the message that is
+	 * being retried.  That message is identified by sending
+	 * cpu number.
+	 */
+	if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master)
+		uv_bau_process_retry_msg(mdp, bcp);
 
-	__get_cpu_var(ptcstats).requestee++;
+	/*
+	 * This is a sw_ack message, so we have to reply to it.
+	 * Count each responding cpu on the socket. This avoids
+	 * pinging the count's cache line back and forth between
+	 * the sockets.
+	 */
+	socket_ack_count = atomic_add_short_return(1, (struct atomic_short *)
+			&smaster->socket_acknowledge_count[mdp->msg_slot]);
+	if (socket_ack_count == bcp->cpus_in_socket) {
+		/*
+		 * Both sockets dump their completed count total into
+		 * the message's count.
+		 */
+		smaster->socket_acknowledge_count[mdp->msg_slot] = 0;
+		msg_ack_count = atomic_add_short_return(socket_ack_count,
+				(struct atomic_short *)&msg->acknowledge_count);
+
+		if (msg_ack_count == bcp->cpus_in_uvhub) {
+			/*
+			 * All cpus in uvhub saw it; reply
+			 */
+			uv_reply_to_message(mdp, bcp);
+		}
+	}
 
-	atomic_inc_short(&msg->acknowledge_count);
-	if (msg->number_of_cpus == msg->acknowledge_count)
-		uv_reply_to_message(sw_ack_slot, msg, msp);
+	return;
 }
 
 /*
- * Examine the payload queue on one distribution node to see
- * which messages have not been seen, and which cpu(s) have not seen them.
+ * Determine the first cpu on a uvhub.
+ */
+static int uvhub_to_first_cpu(int uvhub)
+{
+	int cpu;
+	for_each_present_cpu(cpu)
+		if (uvhub == uv_cpu_to_blade_id(cpu))
+			return cpu;
+	return -1;
+}
+
+/*
+ * Last resort when we get a large number of destination timeouts is
+ * to clear resources held by a given cpu.
+ * Do this with IPI so that all messages in the BAU message queue
+ * can be identified by their nonzero sw_ack_vector field.
  *
- * Returns the number of cpu's that have not responded.
+ * This is entered for a single cpu on the uvhub.
+ * The sender want's this uvhub to free a specific message's
+ * sw_ack resources.
  */
-static int uv_examine_destination(struct bau_control *bau_tablesp, int sender)
+static void
+uv_do_reset(void *ptr)
 {
-	struct bau_payload_queue_entry *msg;
-	struct bau_msg_status *msp;
-	int count = 0;
 	int i;
-	int j;
+	int slot;
+	int count = 0;
+	unsigned long mmr;
+	unsigned long msg_res;
+	struct bau_control *bcp;
+	struct reset_args *rap;
+	struct bau_payload_queue_entry *msg;
+	struct ptc_stats *stat;
 
-	for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE;
-	     msg++, i++) {
-		if ((msg->sending_cpu == sender) && (!msg->replied_to)) {
-			msp = bau_tablesp->msg_statuses + i;
-			printk(KERN_DEBUG
-			       "blade %d: address:%#lx %d of %d, not cpu(s): ",
-			       i, msg->address, msg->acknowledge_count,
-			       msg->number_of_cpus);
-			for (j = 0; j < msg->number_of_cpus; j++) {
-				if (!((1L << j) & msp->seen_by.bits)) {
-					count++;
-					printk("%d ", j);
-				}
+	bcp = &per_cpu(bau_control, smp_processor_id());
+	rap = (struct reset_args *)ptr;
+	stat = &per_cpu(ptcstats, bcp->cpu);
+	stat->d_resets++;
+
+	/*
+	 * We're looking for the given sender, and
+	 * will free its sw_ack resource.
+	 * If all cpu's finally responded after the timeout, its
+	 * message 'replied_to' was set.
+	 */
+	for (msg = bcp->va_queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) {
+		/* uv_do_reset: same conditions for cancellation as
+		   uv_bau_process_retry_msg() */
+		if ((msg->replied_to == 0) &&
+		    (msg->canceled == 0) &&
+		    (msg->sending_cpu == rap->sender) &&
+		    (msg->sw_ack_vector) &&
+		    (msg->msg_type != MSG_NOOP)) {
+			/*
+			 * make everyone else ignore this message
+			 */
+			msg->canceled = 1;
+			slot = msg - bcp->va_queue_first;
+			count++;
+			/*
+			 * only reset the resource if it is still pending
+			 */
+			mmr = uv_read_local_mmr
+					(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
+			msg_res = ((msg->sw_ack_vector << 8) |
+						   msg->sw_ack_vector);
+			if (mmr & msg_res) {
+				stat->d_rcanceled++;
+				uv_write_local_mmr(
+				    UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS,
+							msg_res);
 			}
-			printk("\n");
 		}
 	}
-	return count;
+	return;
 }
 
 /*
- * Examine the payload queue on all the distribution nodes to see
- * which messages have not been seen, and which cpu(s) have not seen them.
- *
- * Returns the number of cpu's that have not responded.
+ * Use IPI to get all target uvhubs to release resources held by
+ * a given sending cpu number.
  */
-static int uv_examine_destinations(struct bau_target_nodemask *distribution)
+static void uv_reset_with_ipi(struct bau_target_uvhubmask *distribution,
+			      int sender)
 {
-	int sender;
-	int i;
-	int count = 0;
+	int uvhub;
+	int cpu;
+	cpumask_t mask;
+	struct reset_args reset_args;
+
+	reset_args.sender = sender;
 
-	sender = smp_processor_id();
-	for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) {
-		if (!bau_node_isset(i, distribution))
+	cpus_clear(mask);
+	/* find a single cpu for each uvhub in this distribution mask */
+	for (uvhub = 0;
+		    uvhub < sizeof(struct bau_target_uvhubmask) * BITSPERBYTE;
+		    uvhub++) {
+		if (!bau_uvhub_isset(uvhub, distribution))
 			continue;
-		count += uv_examine_destination(uv_bau_table_bases[i], sender);
+		/* find a cpu for this uvhub */
+		cpu = uvhub_to_first_cpu(uvhub);
+		cpu_set(cpu, mask);
 	}
-	return count;
+	/* IPI all cpus; Preemption is already disabled */
+	smp_call_function_many(&mask, uv_do_reset, (void *)&reset_args, 1);
+	return;
+}
+
+static inline unsigned long
+cycles_2_us(unsigned long long cyc)
+{
+	unsigned long long ns;
+	unsigned long us;
+	ns =  (cyc * per_cpu(cyc2ns, smp_processor_id()))
+						>> CYC2NS_SCALE_FACTOR;
+	us = ns / 1000;
+	return us;
 }
 
 /*
- * wait for completion of a broadcast message
- *
- * return COMPLETE, RETRY or GIVEUP
+ * wait for all cpus on this hub to finish their sends and go quiet
+ * leaves uvhub_quiesce set so that no new broadcasts are started by
+ * bau_flush_send_and_wait()
+ */
+static inline void
+quiesce_local_uvhub(struct bau_control *hmaster)
+{
+	atomic_add_short_return(1, (struct atomic_short *)
+		 &hmaster->uvhub_quiesce);
+}
+
+/*
+ * mark this quiet-requestor as done
+ */
+static inline void
+end_uvhub_quiesce(struct bau_control *hmaster)
+{
+	atomic_add_short_return(-1, (struct atomic_short *)
+		&hmaster->uvhub_quiesce);
+}
+
+/*
+ * Wait for completion of a broadcast software ack message
+ * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
  */
 static int uv_wait_completion(struct bau_desc *bau_desc,
-			      unsigned long mmr_offset, int right_shift)
+	unsigned long mmr_offset, int right_shift, int this_cpu,
+	struct bau_control *bcp, struct bau_control *smaster, long try)
 {
-	int exams = 0;
-	long destination_timeouts = 0;
-	long source_timeouts = 0;
+	int relaxes = 0;
 	unsigned long descriptor_status;
+	unsigned long mmr;
+	unsigned long mask;
+	cycles_t ttime;
+	cycles_t timeout_time;
+	struct ptc_stats *stat = &per_cpu(ptcstats, this_cpu);
+	struct bau_control *hmaster;
+
+	hmaster = bcp->uvhub_master;
+	timeout_time = get_cycles() + bcp->timeout_interval;
 
+	/* spin on the status MMR, waiting for it to go idle */
 	while ((descriptor_status = (((unsigned long)
 		uv_read_local_mmr(mmr_offset) >>
 			right_shift) & UV_ACT_STATUS_MASK)) !=
 			DESC_STATUS_IDLE) {
-		if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
-			source_timeouts++;
-			if (source_timeouts > SOURCE_TIMEOUT_LIMIT)
-				source_timeouts = 0;
-			__get_cpu_var(ptcstats).s_retry++;
-			return FLUSH_RETRY;
-		}
 		/*
-		 * spin here looking for progress at the destinations
+		 * Our software ack messages may be blocked because there are
+		 * no swack resources available.  As long as none of them
+		 * has timed out hardware will NACK our message and its
+		 * state will stay IDLE.
 		 */
-		if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) {
-			destination_timeouts++;
-			if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) {
-				/*
-				 * returns number of cpus not responding
-				 */
-				if (uv_examine_destinations
-				    (&bau_desc->distribution) == 0) {
-					__get_cpu_var(ptcstats).d_retry++;
-					return FLUSH_RETRY;
-				}
-				exams++;
-				if (exams >= uv_bau_retry_limit) {
-					printk(KERN_DEBUG
-					       "uv_flush_tlb_others");
-					printk("giving up on cpu %d\n",
-					       smp_processor_id());
+		if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) {
+			stat->s_stimeout++;
+			return FLUSH_GIVEUP;
+		} else if (descriptor_status ==
+					DESC_STATUS_DESTINATION_TIMEOUT) {
+			stat->s_dtimeout++;
+			ttime = get_cycles();
+
+			/*
+			 * Our retries may be blocked by all destination
+			 * swack resources being consumed, and a timeout
+			 * pending.  In that case hardware returns the
+			 * ERROR that looks like a destination timeout.
+			 */
+			if (cycles_2_us(ttime - bcp->send_message) < BIOS_TO) {
+				bcp->conseccompletes = 0;
+				return FLUSH_RETRY_PLUGGED;
+			}
+
+			bcp->conseccompletes = 0;
+			return FLUSH_RETRY_TIMEOUT;
+		} else {
+			/*
+			 * descriptor_status is still BUSY
+			 */
+			cpu_relax();
+			relaxes++;
+			if (relaxes >= 10000) {
+				relaxes = 0;
+				if (get_cycles() > timeout_time) {
+					quiesce_local_uvhub(hmaster);
+
+					/* single-thread the register change */
+					spin_lock(&hmaster->masks_lock);
+					mmr = uv_read_local_mmr(mmr_offset);
+					mask = 0UL;
+					mask |= (3UL < right_shift);
+					mask = ~mask;
+					mmr &= mask;
+					uv_write_local_mmr(mmr_offset, mmr);
+					spin_unlock(&hmaster->masks_lock);
+					end_uvhub_quiesce(hmaster);
+					stat->s_busy++;
 					return FLUSH_GIVEUP;
 				}
-				/*
-				 * delays can hang the simulator
-				   udelay(1000);
-				 */
-				destination_timeouts = 0;
 			}
 		}
-		cpu_relax();
 	}
+	bcp->conseccompletes++;
 	return FLUSH_COMPLETE;
 }
 
+static inline cycles_t
+sec_2_cycles(unsigned long sec)
+{
+	unsigned long ns;
+	cycles_t cyc;
+
+	ns = sec * 1000000000;
+	cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id()));
+	return cyc;
+}
+
+/*
+ * conditionally add 1 to *v, unless *v is >= u
+ * return 0 if we cannot add 1 to *v because it is >= u
+ * return 1 if we can add 1 to *v because it is < u
+ * the add is atomic
+ *
+ * This is close to atomic_add_unless(), but this allows the 'u' value
+ * to be lowered below the current 'v'.  atomic_add_unless can only stop
+ * on equal.
+ */
+static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u)
+{
+	spin_lock(lock);
+	if (atomic_read(v) >= u) {
+		spin_unlock(lock);
+		return 0;
+	}
+	atomic_inc(v);
+	spin_unlock(lock);
+	return 1;
+}
+
 /**
  * uv_flush_send_and_wait
  *
- * Send a broadcast and wait for a broadcast message to complete.
+ * Send a broadcast and wait for it to complete.
  *
- * The flush_mask contains the cpus the broadcast was sent to.
+ * The flush_mask contains the cpus the broadcast is to be sent to, plus
+ * cpus that are on the local uvhub.
  *
- * Returns NULL if all remote flushing was done. The mask is zeroed.
+ * Returns NULL if all flushing represented in the mask was done. The mask
+ * is zeroed.
  * Returns @flush_mask if some remote flushing remains to be done. The
- * mask will have some bits still set.
+ * mask will have some bits still set, representing any cpus on the local
+ * uvhub (not current cpu) and any on remote uvhubs if the broadcast failed.
  */
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
-					     struct bau_desc *bau_desc,
-					     struct cpumask *flush_mask)
+const struct cpumask *uv_flush_send_and_wait(struct bau_desc *bau_desc,
+					     struct cpumask *flush_mask,
+					     struct bau_control *bcp)
 {
-	int completion_status = 0;
 	int right_shift;
-	int tries = 0;
-	int pnode;
+	int uvhub;
 	int bit;
+	int completion_status = 0;
+	int seq_number = 0;
+	long try = 0;
+	int cpu = bcp->uvhub_cpu;
+	int this_cpu = bcp->cpu;
+	int this_uvhub = bcp->uvhub;
 	unsigned long mmr_offset;
 	unsigned long index;
 	cycles_t time1;
 	cycles_t time2;
+	struct ptc_stats *stat = &per_cpu(ptcstats, bcp->cpu);
+	struct bau_control *smaster = bcp->socket_master;
+	struct bau_control *hmaster = bcp->uvhub_master;
+
+	/*
+	 * Spin here while there are hmaster->max_concurrent or more active
+	 * descriptors. This is the per-uvhub 'throttle'.
+	 */
+	if (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
+			&hmaster->active_descriptor_count,
+			hmaster->max_concurrent)) {
+		stat->s_throttles++;
+		do {
+			cpu_relax();
+		} while (!atomic_inc_unless_ge(&hmaster->uvhub_lock,
+			&hmaster->active_descriptor_count,
+			hmaster->max_concurrent));
+	}
+
+	while (hmaster->uvhub_quiesce)
+		cpu_relax();
 
 	if (cpu < UV_CPUS_PER_ACT_STATUS) {
 		mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
@@ -267,24 +557,108 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
 	}
 	time1 = get_cycles();
 	do {
-		tries++;
+		/*
+		 * Every message from any given cpu gets a unique message
+		 * sequence number. But retries use that same number.
+		 * Our message may have timed out at the destination because
+		 * all sw-ack resources are in use and there is a timeout
+		 * pending there.  In that case, our last send never got
+		 * placed into the queue and we need to persist until it
+		 * does.
+		 *
+		 * Make any retry a type MSG_RETRY so that the destination will
+		 * free any resource held by a previous message from this cpu.
+		 */
+		if (try == 0) {
+			/* use message type set by the caller the first time */
+			seq_number = bcp->message_number++;
+		} else {
+			/* use RETRY type on all the rest; same sequence */
+			bau_desc->header.msg_type = MSG_RETRY;
+			stat->s_retry_messages++;
+		}
+		bau_desc->header.sequence = seq_number;
 		index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) |
-			cpu;
+			bcp->uvhub_cpu;
+		bcp->send_message = get_cycles();
+
 		uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
+
+		try++;
 		completion_status = uv_wait_completion(bau_desc, mmr_offset,
-					right_shift);
-	} while (completion_status == FLUSH_RETRY);
+			right_shift, this_cpu, bcp, smaster, try);
+
+		if (completion_status == FLUSH_RETRY_PLUGGED) {
+			/*
+			 * Our retries may be blocked by all destination swack
+			 * resources being consumed, and a timeout pending. In
+			 * that case hardware immediately returns the ERROR
+			 * that looks like a destination timeout.
+			 */
+			udelay(TIMEOUT_DELAY);
+			bcp->plugged_tries++;
+			if (bcp->plugged_tries >= PLUGSB4RESET) {
+				bcp->plugged_tries = 0;
+				quiesce_local_uvhub(hmaster);
+				spin_lock(&hmaster->queue_lock);
+				uv_reset_with_ipi(&bau_desc->distribution,
+							this_cpu);
+				spin_unlock(&hmaster->queue_lock);
+				end_uvhub_quiesce(hmaster);
+				bcp->ipi_attempts++;
+				stat->s_resets_plug++;
+			}
+		} else if (completion_status == FLUSH_RETRY_TIMEOUT) {
+			hmaster->max_concurrent = 1;
+			bcp->timeout_tries++;
+			udelay(TIMEOUT_DELAY);
+			if (bcp->timeout_tries >= TIMEOUTSB4RESET) {
+				bcp->timeout_tries = 0;
+				quiesce_local_uvhub(hmaster);
+				spin_lock(&hmaster->queue_lock);
+				uv_reset_with_ipi(&bau_desc->distribution,
+								this_cpu);
+				spin_unlock(&hmaster->queue_lock);
+				end_uvhub_quiesce(hmaster);
+				bcp->ipi_attempts++;
+				stat->s_resets_timeout++;
+			}
+		}
+		if (bcp->ipi_attempts >= 3) {
+			bcp->ipi_attempts = 0;
+			completion_status = FLUSH_GIVEUP;
+			break;
+		}
+		cpu_relax();
+	} while ((completion_status == FLUSH_RETRY_PLUGGED) ||
+		 (completion_status == FLUSH_RETRY_TIMEOUT));
 	time2 = get_cycles();
-	__get_cpu_var(ptcstats).sflush += (time2 - time1);
-	if (tries > 1)
-		__get_cpu_var(ptcstats).retriesok++;
 
-	if (completion_status == FLUSH_GIVEUP) {
+	if ((completion_status == FLUSH_COMPLETE) && (bcp->conseccompletes > 5)
+	    && (hmaster->max_concurrent < hmaster->max_concurrent_constant))
+			hmaster->max_concurrent++;
+
+	/*
+	 * hold any cpu not timing out here; no other cpu currently held by
+	 * the 'throttle' should enter the activation code
+	 */
+	while (hmaster->uvhub_quiesce)
+		cpu_relax();
+	atomic_dec(&hmaster->active_descriptor_count);
+
+	/* guard against cycles wrap */
+	if (time2 > time1)
+		stat->s_time += (time2 - time1);
+	else
+		stat->s_requestor--; /* don't count this one */
+	if (completion_status == FLUSH_COMPLETE && try > 1)
+		stat->s_retriesok++;
+	else if (completion_status == FLUSH_GIVEUP) {
 		/*
 		 * Cause the caller to do an IPI-style TLB shootdown on
-		 * the cpu's, all of which are still in the mask.
+		 * the target cpu's, all of which are still in the mask.
 		 */
-		__get_cpu_var(ptcstats).ptc_i++;
+		stat->s_giveup++;
 		return flush_mask;
 	}
 
@@ -293,18 +667,17 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
 	 * use the IPI method of shootdown on them.
 	 */
 	for_each_cpu(bit, flush_mask) {
-		pnode = uv_cpu_to_pnode(bit);
-		if (pnode == this_pnode)
+		uvhub = uv_cpu_to_blade_id(bit);
+		if (uvhub == this_uvhub)
 			continue;
 		cpumask_clear_cpu(bit, flush_mask);
 	}
 	if (!cpumask_empty(flush_mask))
 		return flush_mask;
+
 	return NULL;
 }
 
-static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
-
 /**
  * uv_flush_tlb_others - globally purge translation cache of a virtual
  * address or all TLB's
@@ -321,8 +694,8 @@ static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
  * The caller has derived the cpumask from the mm_struct.  This function
  * is called only if there are bits set in the mask. (e.g. flush_tlb_page())
  *
- * The cpumask is converted into a nodemask of the nodes containing
- * the cpus.
+ * The cpumask is converted into a uvhubmask of the uvhubs containing
+ * those cpus.
  *
  * Note that this function should be called with preemption disabled.
  *
@@ -334,52 +707,82 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 					  struct mm_struct *mm,
 					  unsigned long va, unsigned int cpu)
 {
-	struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
-	int i;
-	int bit;
-	int pnode;
-	int uv_cpu;
-	int this_pnode;
+	int remotes;
+	int tcpu;
+	int uvhub;
 	int locals = 0;
 	struct bau_desc *bau_desc;
+	struct cpumask *flush_mask;
+	struct ptc_stats *stat;
+	struct bau_control *bcp;
 
-	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
+	if (nobau)
+		return cpumask;
 
-	uv_cpu = uv_blade_processor_id();
-	this_pnode = uv_hub_info->pnode;
-	bau_desc = __get_cpu_var(bau_control).descriptor_base;
-	bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
+	bcp = &per_cpu(bau_control, cpu);
+	/*
+	 * Each sending cpu has a per-cpu mask which it fills from the caller's
+	 * cpu mask.  Only remote cpus are converted to uvhubs and copied.
+	 */
+	flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu);
+	/*
+	 * copy cpumask to flush_mask, removing current cpu
+	 * (current cpu should already have been flushed by the caller and
+	 *  should never be returned if we return flush_mask)
+	 */
+	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
+	if (cpu_isset(cpu, *cpumask))
+		locals++;  /* current cpu was targeted */
 
-	bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
+	bau_desc = bcp->descriptor_base;
+	bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu;
 
-	i = 0;
-	for_each_cpu(bit, flush_mask) {
-		pnode = uv_cpu_to_pnode(bit);
-		BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
-		if (pnode == this_pnode) {
+	bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
+	remotes = 0;
+	for_each_cpu(tcpu, flush_mask) {
+		uvhub = uv_cpu_to_blade_id(tcpu);
+		if (uvhub == bcp->uvhub) {
 			locals++;
 			continue;
 		}
-		bau_node_set(pnode - uv_partition_base_pnode,
-				&bau_desc->distribution);
-		i++;
+		bau_uvhub_set(uvhub, &bau_desc->distribution);
+		remotes++;
 	}
-	if (i == 0) {
+	if (remotes == 0) {
 		/*
-		 * no off_node flushing; return status for local node
+		 * No off_hub flushing; return status for local hub.
+		 * Return the caller's mask if all were local (the current
+		 * cpu may be in that mask).
 		 */
 		if (locals)
-			return flush_mask;
+			return cpumask;
 		else
 			return NULL;
 	}
-	__get_cpu_var(ptcstats).requestor++;
-	__get_cpu_var(ptcstats).ntargeted += i;
+	stat = &per_cpu(ptcstats, cpu);
+	stat->s_requestor++;
+	stat->s_ntargcpu += remotes;
+	remotes = bau_uvhub_weight(&bau_desc->distribution);
+	stat->s_ntarguvhub += remotes;
+	if (remotes >= 16)
+		stat->s_ntarguvhub16++;
+	else if (remotes >= 8)
+		stat->s_ntarguvhub8++;
+	else if (remotes >= 4)
+		stat->s_ntarguvhub4++;
+	else if (remotes >= 2)
+		stat->s_ntarguvhub2++;
+	else
+		stat->s_ntarguvhub1++;
 
 	bau_desc->payload.address = va;
 	bau_desc->payload.sending_cpu = cpu;
 
-	return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
+	/*
+	 * uv_flush_send_and_wait returns null if all cpu's were messaged, or
+	 * the adjusted flush_mask if any cpu's were not messaged.
+	 */
+	return uv_flush_send_and_wait(bau_desc, flush_mask, bcp);
 }
 
 /*
@@ -388,87 +791,70 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
  *
  * We received a broadcast assist message.
  *
- * Interrupts may have been disabled; this interrupt could represent
+ * Interrupts are disabled; this interrupt could represent
  * the receipt of several messages.
  *
- * All cores/threads on this node get this interrupt.
- * The last one to see it does the s/w ack.
+ * All cores/threads on this hub get this interrupt.
+ * The last one to see it does the software ack.
  * (the resource will not be freed until noninterruptable cpus see this
- *  interrupt; hardware will timeout the s/w ack and reply ERROR)
+ *  interrupt; hardware may timeout the s/w ack and reply ERROR)
  */
 void uv_bau_message_interrupt(struct pt_regs *regs)
 {
-	struct bau_payload_queue_entry *va_queue_first;
-	struct bau_payload_queue_entry *va_queue_last;
-	struct bau_payload_queue_entry *msg;
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	cycles_t time1;
-	cycles_t time2;
-	int msg_slot;
-	int sw_ack_slot;
-	int fw;
 	int count = 0;
-	unsigned long local_pnode;
-
-	ack_APIC_irq();
-	exit_idle();
-	irq_enter();
-
-	time1 = get_cycles();
-
-	local_pnode = uv_blade_to_pnode(uv_numa_blade_id());
-
-	va_queue_first = __get_cpu_var(bau_control).va_queue_first;
-	va_queue_last = __get_cpu_var(bau_control).va_queue_last;
-
-	msg = __get_cpu_var(bau_control).bau_msg_head;
+	cycles_t time_start;
+	struct bau_payload_queue_entry *msg;
+	struct bau_control *bcp;
+	struct ptc_stats *stat;
+	struct msg_desc msgdesc;
+
+	time_start = get_cycles();
+	bcp = &per_cpu(bau_control, smp_processor_id());
+	stat = &per_cpu(ptcstats, smp_processor_id());
+	msgdesc.va_queue_first = bcp->va_queue_first;
+	msgdesc.va_queue_last = bcp->va_queue_last;
+	msg = bcp->bau_msg_head;
 	while (msg->sw_ack_vector) {
 		count++;
-		fw = msg->sw_ack_vector;
-		msg_slot = msg - va_queue_first;
-		sw_ack_slot = ffs(fw) - 1;
-
-		uv_bau_process_message(msg, msg_slot, sw_ack_slot);
-
+		msgdesc.msg_slot = msg - msgdesc.va_queue_first;
+		msgdesc.sw_ack_slot = ffs(msg->sw_ack_vector) - 1;
+		msgdesc.msg = msg;
+		uv_bau_process_message(&msgdesc, bcp);
 		msg++;
-		if (msg > va_queue_last)
-			msg = va_queue_first;
-		__get_cpu_var(bau_control).bau_msg_head = msg;
+		if (msg > msgdesc.va_queue_last)
+			msg = msgdesc.va_queue_first;
+		bcp->bau_msg_head = msg;
 	}
+	stat->d_time += (get_cycles() - time_start);
 	if (!count)
-		__get_cpu_var(ptcstats).nomsg++;
+		stat->d_nomsg++;
 	else if (count > 1)
-		__get_cpu_var(ptcstats).multmsg++;
-
-	time2 = get_cycles();
-	__get_cpu_var(ptcstats).dflush += (time2 - time1);
-
-	irq_exit();
-	set_irq_regs(old_regs);
+		stat->d_multmsg++;
+	ack_APIC_irq();
 }
 
 /*
  * uv_enable_timeouts
  *
- * Each target blade (i.e. blades that have cpu's) needs to have
+ * Each target uvhub (i.e. a uvhub that has no cpu's) needs to have
  * shootdown message timeouts enabled.  The timeout does not cause
  * an interrupt, but causes an error message to be returned to
  * the sender.
  */
 static void uv_enable_timeouts(void)
 {
-	int blade;
-	int nblades;
+	int uvhub;
+	int nuvhubs;
 	int pnode;
 	unsigned long mmr_image;
 
-	nblades = uv_num_possible_blades();
+	nuvhubs = uv_num_possible_blades();
 
-	for (blade = 0; blade < nblades; blade++) {
-		if (!uv_blade_nr_possible_cpus(blade))
+	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
+		if (!uv_blade_nr_possible_cpus(uvhub))
 			continue;
 
-		pnode = uv_blade_to_pnode(blade);
+		pnode = uv_blade_to_pnode(uvhub);
 		mmr_image =
 		    uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
 		/*
@@ -478,16 +864,16 @@ static void uv_enable_timeouts(void)
 		 * To program the period, the SOFT_ACK_MODE must be off.
 		 */
 		mmr_image &= ~((unsigned long)1 <<
-			       UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		    UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT);
 		uv_write_global_mmr64
 		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 		/*
 		 * Set the 4-bit period.
 		 */
 		mmr_image &= ~((unsigned long)0xf <<
-			UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		     UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT);
 		mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
-			     UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		     UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT);
 		uv_write_global_mmr64
 		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 		/*
@@ -496,7 +882,7 @@ static void uv_enable_timeouts(void)
 		 * indicated in bits 2:0 (7 causes all of them to timeout).
 		 */
 		mmr_image |= ((unsigned long)1 <<
-			      UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		    UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT);
 		uv_write_global_mmr64
 		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 	}
@@ -521,9 +907,20 @@ static void uv_ptc_seq_stop(struct seq_file *file, void *data)
 {
 }
 
+static inline unsigned long long
+millisec_2_cycles(unsigned long millisec)
+{
+	unsigned long ns;
+	unsigned long long cyc;
+
+	ns = millisec * 1000;
+	cyc = (ns << CYC2NS_SCALE_FACTOR)/(per_cpu(cyc2ns, smp_processor_id()));
+	return cyc;
+}
+
 /*
- * Display the statistics thru /proc
- * data points to the cpu number
+ * Display the statistics thru /proc.
+ * 'data' points to the cpu number
  */
 static int uv_ptc_seq_show(struct seq_file *file, void *data)
 {
@@ -534,78 +931,155 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data)
 
 	if (!cpu) {
 		seq_printf(file,
-		"# cpu requestor requestee one all sretry dretry ptc_i ");
+			"# cpu sent stime numuvhubs numuvhubs16 numuvhubs8 ");
 		seq_printf(file,
-		"sw_ack sflush dflush sok dnomsg dmult starget\n");
+			"numuvhubs4 numuvhubs2 numuvhubs1 numcpus dto ");
+		seq_printf(file,
+			"retries rok resetp resett giveup sto bz throt ");
+		seq_printf(file,
+			"sw_ack recv rtime all ");
+		seq_printf(file,
+			"one mult none retry canc nocan reset rcan\n");
 	}
 	if (cpu < num_possible_cpus() && cpu_online(cpu)) {
 		stat = &per_cpu(ptcstats, cpu);
-		seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ",
-			   cpu, stat->requestor,
-			   stat->requestee, stat->onetlb, stat->alltlb,
-			   stat->s_retry, stat->d_retry, stat->ptc_i);
-		seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
+		/* source side statistics */
+		seq_printf(file,
+			"cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
+			   cpu, stat->s_requestor, cycles_2_us(stat->s_time),
+			   stat->s_ntarguvhub, stat->s_ntarguvhub16,
+			   stat->s_ntarguvhub8, stat->s_ntarguvhub4,
+			   stat->s_ntarguvhub2, stat->s_ntarguvhub1,
+			   stat->s_ntargcpu, stat->s_dtimeout);
+		seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ",
+			   stat->s_retry_messages, stat->s_retriesok,
+			   stat->s_resets_plug, stat->s_resets_timeout,
+			   stat->s_giveup, stat->s_stimeout,
+			   stat->s_busy, stat->s_throttles);
+		/* destination side statistics */
+		seq_printf(file,
+			   "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
 			   uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
 					UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
-			   stat->sflush, stat->dflush,
-			   stat->retriesok, stat->nomsg,
-			   stat->multmsg, stat->ntargeted);
+			   stat->d_requestee, cycles_2_us(stat->d_time),
+			   stat->d_alltlb, stat->d_onetlb, stat->d_multmsg,
+			   stat->d_nomsg, stat->d_retries, stat->d_canceled,
+			   stat->d_nocanceled, stat->d_resets,
+			   stat->d_rcanceled);
 	}
 
 	return 0;
 }
 
 /*
+ * -1: resetf the statistics
  *  0: display meaning of the statistics
- * >0: retry limit
+ * >0: maximum concurrent active descriptors per uvhub (throttle)
  */
 static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
 				 size_t count, loff_t *data)
 {
-	long newmode;
+	int cpu;
+	long input_arg;
 	char optstr[64];
+	struct ptc_stats *stat;
+	struct bau_control *bcp;
 
 	if (count == 0 || count > sizeof(optstr))
 		return -EINVAL;
 	if (copy_from_user(optstr, user, count))
 		return -EFAULT;
 	optstr[count - 1] = '\0';
-	if (strict_strtoul(optstr, 10, &newmode) < 0) {
+	if (strict_strtol(optstr, 10, &input_arg) < 0) {
 		printk(KERN_DEBUG "%s is invalid\n", optstr);
 		return -EINVAL;
 	}
 
-	if (newmode == 0) {
+	if (input_arg == 0) {
 		printk(KERN_DEBUG "# cpu:      cpu number\n");
+		printk(KERN_DEBUG "Sender statistics:\n");
+		printk(KERN_DEBUG
+		"sent:     number of shootdown messages sent\n");
+		printk(KERN_DEBUG
+		"stime:    time spent sending messages\n");
+		printk(KERN_DEBUG
+		"numuvhubs: number of hubs targeted with shootdown\n");
+		printk(KERN_DEBUG
+		"numuvhubs16: number times 16 or more hubs targeted\n");
+		printk(KERN_DEBUG
+		"numuvhubs8: number times 8 or more hubs targeted\n");
+		printk(KERN_DEBUG
+		"numuvhubs4: number times 4 or more hubs targeted\n");
+		printk(KERN_DEBUG
+		"numuvhubs2: number times 2 or more hubs targeted\n");
+		printk(KERN_DEBUG
+		"numuvhubs1: number times 1 hub targeted\n");
+		printk(KERN_DEBUG
+		"numcpus:  number of cpus targeted with shootdown\n");
+		printk(KERN_DEBUG
+		"dto:      number of destination timeouts\n");
+		printk(KERN_DEBUG
+		"retries:  destination timeout retries sent\n");
+		printk(KERN_DEBUG
+		"rok:   :  destination timeouts successfully retried\n");
+		printk(KERN_DEBUG
+		"resetp:   ipi-style resource resets for plugs\n");
+		printk(KERN_DEBUG
+		"resett:   ipi-style resource resets for timeouts\n");
+		printk(KERN_DEBUG
+		"giveup:   fall-backs to ipi-style shootdowns\n");
+		printk(KERN_DEBUG
+		"sto:      number of source timeouts\n");
+		printk(KERN_DEBUG
+		"bz:       number of stay-busy's\n");
+		printk(KERN_DEBUG
+		"throt:    number times spun in throttle\n");
+		printk(KERN_DEBUG "Destination side statistics:\n");
 		printk(KERN_DEBUG
-		"requestor:  times this cpu was the flush requestor\n");
+		"sw_ack:   image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n");
 		printk(KERN_DEBUG
-		"requestee:  times this cpu was requested to flush its TLBs\n");
+		"recv:     shootdown messages received\n");
 		printk(KERN_DEBUG
-		"one:        times requested to flush a single address\n");
+		"rtime:    time spent processing messages\n");
 		printk(KERN_DEBUG
-		"all:        times requested to flush all TLB's\n");
+		"all:      shootdown all-tlb messages\n");
 		printk(KERN_DEBUG
-		"sretry:     number of retries of source-side timeouts\n");
+		"one:      shootdown one-tlb messages\n");
 		printk(KERN_DEBUG
-		"dretry:     number of retries of destination-side timeouts\n");
+		"mult:     interrupts that found multiple messages\n");
 		printk(KERN_DEBUG
-		"ptc_i:      times UV fell through to IPI-style flushes\n");
+		"none:     interrupts that found no messages\n");
 		printk(KERN_DEBUG
-		"sw_ack:     image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n");
+		"retry:    number of retry messages processed\n");
 		printk(KERN_DEBUG
-		"sflush_us:  cycles spent in uv_flush_tlb_others()\n");
+		"canc:     number messages canceled by retries\n");
 		printk(KERN_DEBUG
-		"dflush_us:  cycles spent in handling flush requests\n");
-		printk(KERN_DEBUG "sok:        successes on retry\n");
-		printk(KERN_DEBUG "dnomsg:     interrupts with no message\n");
+		"nocan:    number retries that found nothing to cancel\n");
 		printk(KERN_DEBUG
-		"dmult:      interrupts with multiple messages\n");
-		printk(KERN_DEBUG "starget:    nodes targeted\n");
+		"reset:    number of ipi-style reset requests processed\n");
+		printk(KERN_DEBUG
+		"rcan:     number messages canceled by reset requests\n");
+	} else if (input_arg == -1) {
+		for_each_present_cpu(cpu) {
+			stat = &per_cpu(ptcstats, cpu);
+			memset(stat, 0, sizeof(struct ptc_stats));
+		}
 	} else {
-		uv_bau_retry_limit = newmode;
-		printk(KERN_DEBUG "timeout retry limit:%d\n",
-		       uv_bau_retry_limit);
+		uv_bau_max_concurrent = input_arg;
+		bcp = &per_cpu(bau_control, smp_processor_id());
+		if (uv_bau_max_concurrent < 1 ||
+		    uv_bau_max_concurrent > bcp->cpus_in_uvhub) {
+			printk(KERN_DEBUG
+				"Error: BAU max concurrent %d; %d is invalid\n",
+				bcp->max_concurrent, uv_bau_max_concurrent);
+			return -EINVAL;
+		}
+		printk(KERN_DEBUG "Set BAU max concurrent:%d\n",
+		       uv_bau_max_concurrent);
+		for_each_present_cpu(cpu) {
+			bcp = &per_cpu(bau_control, cpu);
+			bcp->max_concurrent = uv_bau_max_concurrent;
+		}
 	}
 
 	return count;
@@ -649,79 +1123,30 @@ static int __init uv_ptc_init(void)
 }
 
 /*
- * begin the initialization of the per-blade control structures
- */
-static struct bau_control * __init uv_table_bases_init(int blade, int node)
-{
-	int i;
-	struct bau_msg_status *msp;
-	struct bau_control *bau_tabp;
-
-	bau_tabp =
-	    kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node);
-	BUG_ON(!bau_tabp);
-
-	bau_tabp->msg_statuses =
-	    kmalloc_node(sizeof(struct bau_msg_status) *
-			 DEST_Q_SIZE, GFP_KERNEL, node);
-	BUG_ON(!bau_tabp->msg_statuses);
-
-	for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++)
-		bau_cpubits_clear(&msp->seen_by, (int)
-				  uv_blade_nr_possible_cpus(blade));
-
-	uv_bau_table_bases[blade] = bau_tabp;
-
-	return bau_tabp;
-}
-
-/*
- * finish the initialization of the per-blade control structures
- */
-static void __init
-uv_table_bases_finish(int blade,
-		      struct bau_control *bau_tablesp,
-		      struct bau_desc *adp)
-{
-	struct bau_control *bcp;
-	int cpu;
-
-	for_each_present_cpu(cpu) {
-		if (blade != uv_cpu_to_blade_id(cpu))
-			continue;
-
-		bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
-		bcp->bau_msg_head	= bau_tablesp->va_queue_first;
-		bcp->va_queue_first	= bau_tablesp->va_queue_first;
-		bcp->va_queue_last	= bau_tablesp->va_queue_last;
-		bcp->msg_statuses	= bau_tablesp->msg_statuses;
-		bcp->descriptor_base	= adp;
-	}
-}
-
-/*
  * initialize the sending side's sending buffers
  */
-static struct bau_desc * __init
+static void
 uv_activation_descriptor_init(int node, int pnode)
 {
 	int i;
+	int cpu;
 	unsigned long pa;
 	unsigned long m;
 	unsigned long n;
-	struct bau_desc *adp;
-	struct bau_desc *ad2;
+	struct bau_desc *bau_desc;
+	struct bau_desc *bd2;
+	struct bau_control *bcp;
 
 	/*
 	 * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
-	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per blade
+	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
 	 */
-	adp = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
+	bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
 		UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
-	BUG_ON(!adp);
+	BUG_ON(!bau_desc);
 
-	pa = uv_gpa(adp); /* need the real nasid*/
-	n = uv_gpa_to_pnode(pa);
+	pa = uv_gpa(bau_desc); /* need the real nasid*/
+	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
@@ -730,96 +1155,188 @@ uv_activation_descriptor_init(int node, int pnode)
 	/*
 	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
 	 * cpu even though we only use the first one; one descriptor can
-	 * describe a broadcast to 256 nodes.
+	 * describe a broadcast to 256 uv hubs.
 	 */
-	for (i = 0, ad2 = adp; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR);
-		i++, ad2++) {
-		memset(ad2, 0, sizeof(struct bau_desc));
-		ad2->header.sw_ack_flag = 1;
+	for (i = 0, bd2 = bau_desc; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR);
+		i++, bd2++) {
+		memset(bd2, 0, sizeof(struct bau_desc));
+		bd2->header.sw_ack_flag = 1;
 		/*
-		 * base_dest_nodeid is the first node in the partition, so
-		 * the bit map will indicate partition-relative node numbers.
-		 * note that base_dest_nodeid is actually a nasid.
+		 * base_dest_nodeid is the nasid (pnode<<1) of the first uvhub
+		 * in the partition. The bit map will indicate uvhub numbers,
+		 * which are 0-N in a partition. Pnodes are unique system-wide.
 		 */
-		ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
-		ad2->header.dest_subnodeid = 0x10; /* the LB */
-		ad2->header.command = UV_NET_ENDPOINT_INTD;
-		ad2->header.int_both = 1;
+		bd2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+		bd2->header.dest_subnodeid = 0x10; /* the LB */
+		bd2->header.command = UV_NET_ENDPOINT_INTD;
+		bd2->header.int_both = 1;
 		/*
 		 * all others need to be set to zero:
 		 *   fairness chaining multilevel count replied_to
 		 */
 	}
-	return adp;
+	for_each_present_cpu(cpu) {
+		if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
+			continue;
+		bcp = &per_cpu(bau_control, cpu);
+		bcp->descriptor_base = bau_desc;
+	}
 }
 
 /*
  * initialize the destination side's receiving buffers
+ * entered for each uvhub in the partition
+ * - node is first node (kernel memory notion) on the uvhub
+ * - pnode is the uvhub's physical identifier
  */
-static struct bau_payload_queue_entry * __init
-uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
+static void
+uv_payload_queue_init(int node, int pnode)
 {
-	struct bau_payload_queue_entry *pqp;
-	unsigned long pa;
 	int pn;
+	int cpu;
 	char *cp;
+	unsigned long pa;
+	struct bau_payload_queue_entry *pqp;
+	struct bau_payload_queue_entry *pqp_malloc;
+	struct bau_control *bcp;
 
 	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
 		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
 		GFP_KERNEL, node);
 	BUG_ON(!pqp);
+	pqp_malloc = pqp;
 
 	cp = (char *)pqp + 31;
 	pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
-	bau_tablesp->va_queue_first = pqp;
+
+	for_each_present_cpu(cpu) {
+		if (pnode != uv_cpu_to_pnode(cpu))
+			continue;
+		/* for every cpu on this pnode: */
+		bcp = &per_cpu(bau_control, cpu);
+		bcp->va_queue_first = pqp;
+		bcp->bau_msg_head = pqp;
+		bcp->va_queue_last = pqp + (DEST_Q_SIZE - 1);
+	}
 	/*
 	 * need the pnode of where the memory was really allocated
 	 */
 	pa = uv_gpa(pqp);
-	pn = uv_gpa_to_pnode(pa);
+	pn = pa >> uv_nshift;
 	uv_write_global_mmr64(pnode,
 			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
 			      ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
 			      uv_physnodeaddr(pqp));
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
 			      uv_physnodeaddr(pqp));
-	bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1);
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST,
 			      (unsigned long)
-			      uv_physnodeaddr(bau_tablesp->va_queue_last));
+			      uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1)));
+	/* in effect, all msg_type's are set to MSG_NOOP */
 	memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE);
-
-	return pqp;
 }
 
 /*
- * Initialization of each UV blade's structures
+ * Initialization of each UV hub's structures
  */
-static int __init uv_init_blade(int blade)
+static void __init uv_init_uvhub(int uvhub, int vector)
 {
 	int node;
 	int pnode;
-	unsigned long pa;
 	unsigned long apicid;
-	struct bau_desc *adp;
-	struct bau_payload_queue_entry *pqp;
-	struct bau_control *bau_tablesp;
-
-	node = blade_to_first_node(blade);
-	bau_tablesp = uv_table_bases_init(blade, node);
-	pnode = uv_blade_to_pnode(blade);
-	adp = uv_activation_descriptor_init(node, pnode);
-	pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
-	uv_table_bases_finish(blade, bau_tablesp, adp);
+
+	node = uvhub_to_first_node(uvhub);
+	pnode = uv_blade_to_pnode(uvhub);
+	uv_activation_descriptor_init(node, pnode);
+	uv_payload_queue_init(node, pnode);
 	/*
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = blade_to_first_apicid(blade);
-	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
+	apicid = uvhub_to_first_apicid(uvhub);
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
-				      ((apicid << 32) | UV_BAU_MESSAGE));
-	return 0;
+				      ((apicid << 32) | vector));
+}
+
+/*
+ * initialize the bau_control structure for each cpu
+ */
+static void uv_init_per_cpu(int nuvhubs)
+{
+	int i, j, k;
+	int cpu;
+	int pnode;
+	int uvhub;
+	short socket = 0;
+	struct bau_control *bcp;
+	struct uvhub_desc *bdp;
+	struct socket_desc *sdp;
+	struct bau_control *hmaster = NULL;
+	struct bau_control *smaster = NULL;
+	struct socket_desc {
+		short num_cpus;
+		short cpu_number[16];
+	};
+	struct uvhub_desc {
+		short num_sockets;
+		short num_cpus;
+		short uvhub;
+		short pnode;
+		struct socket_desc socket[2];
+	};
+	struct uvhub_desc *uvhub_descs;
+
+	uvhub_descs = (struct uvhub_desc *)
+		kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+	memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
+	for_each_present_cpu(cpu) {
+		bcp = &per_cpu(bau_control, cpu);
+		memset(bcp, 0, sizeof(struct bau_control));
+		spin_lock_init(&bcp->masks_lock);
+		bcp->max_concurrent = uv_bau_max_concurrent;
+		pnode = uv_cpu_hub_info(cpu)->pnode;
+		uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
+		bdp = &uvhub_descs[uvhub];
+		bdp->num_cpus++;
+		bdp->uvhub = uvhub;
+		bdp->pnode = pnode;
+		/* time interval to catch a hardware stay-busy bug */
+		bcp->timeout_interval = millisec_2_cycles(3);
+		/* kludge: assume uv_hub.h is constant */
+		socket = (cpu_physical_id(cpu)>>5)&1;
+		if (socket >= bdp->num_sockets)
+			bdp->num_sockets = socket+1;
+		sdp = &bdp->socket[socket];
+		sdp->cpu_number[sdp->num_cpus] = cpu;
+		sdp->num_cpus++;
+	}
+	socket = 0;
+	for_each_possible_blade(uvhub) {
+		bdp = &uvhub_descs[uvhub];
+		for (i = 0; i < bdp->num_sockets; i++) {
+			sdp = &bdp->socket[i];
+			for (j = 0; j < sdp->num_cpus; j++) {
+				cpu = sdp->cpu_number[j];
+				bcp = &per_cpu(bau_control, cpu);
+				bcp->cpu = cpu;
+				if (j == 0) {
+					smaster = bcp;
+					if (i == 0)
+						hmaster = bcp;
+				}
+				bcp->cpus_in_uvhub = bdp->num_cpus;
+				bcp->cpus_in_socket = sdp->num_cpus;
+				bcp->socket_master = smaster;
+				bcp->uvhub_master = hmaster;
+				for (k = 0; k < DEST_Q_SIZE; k++)
+					bcp->socket_acknowledge_count[k] = 0;
+				bcp->uvhub_cpu =
+				  uv_cpu_hub_info(cpu)->blade_processor_id;
+			}
+			socket++;
+		}
+	}
+	kfree(uvhub_descs);
 }
 
 /*
@@ -827,38 +1344,54 @@ static int __init uv_init_blade(int blade)
  */
 static int __init uv_bau_init(void)
 {
-	int blade;
-	int nblades;
+	int uvhub;
+	int pnode;
+	int nuvhubs;
 	int cur_cpu;
+	int vector;
+	unsigned long mmr;
 
 	if (!is_uv_system())
 		return 0;
 
+	if (nobau)
+		return 0;
+
 	for_each_possible_cpu(cur_cpu)
 		zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
 				       GFP_KERNEL, cpu_to_node(cur_cpu));
 
-	uv_bau_retry_limit = 1;
+	uv_bau_max_concurrent = MAX_BAU_CONCURRENT;
+	uv_nshift = uv_hub_info->m_val;
 	uv_mmask = (1UL << uv_hub_info->m_val) - 1;
-	nblades = uv_num_possible_blades();
+	nuvhubs = uv_num_possible_blades();
 
-	uv_bau_table_bases = (struct bau_control **)
-	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
-	BUG_ON(!uv_bau_table_bases);
+	uv_init_per_cpu(nuvhubs);
 
 	uv_partition_base_pnode = 0x7fffffff;
-	for (blade = 0; blade < nblades; blade++)
-		if (uv_blade_nr_possible_cpus(blade) &&
-			(uv_blade_to_pnode(blade) < uv_partition_base_pnode))
-			uv_partition_base_pnode = uv_blade_to_pnode(blade);
-	for (blade = 0; blade < nblades; blade++)
-		if (uv_blade_nr_possible_cpus(blade))
-			uv_init_blade(blade);
-
-	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	for (uvhub = 0; uvhub < nuvhubs; uvhub++)
+		if (uv_blade_nr_possible_cpus(uvhub) &&
+			(uv_blade_to_pnode(uvhub) < uv_partition_base_pnode))
+			uv_partition_base_pnode = uv_blade_to_pnode(uvhub);
+
+	vector = UV_BAU_MESSAGE;
+	for_each_possible_blade(uvhub)
+		if (uv_blade_nr_possible_cpus(uvhub))
+			uv_init_uvhub(uvhub, vector);
+
 	uv_enable_timeouts();
+	alloc_intr_gate(vector, uv_bau_message_intr1);
+
+	for_each_possible_blade(uvhub) {
+		pnode = uv_blade_to_pnode(uvhub);
+		/* INIT the bau */
+		uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL,
+				      ((unsigned long)1 << 63));
+		mmr = 1; /* should be 1 to broadcast to both sockets */
+		uv_write_global_mmr64(pnode, UVH_BAU_DATA_BROADCAST, mmr);
+	}
 
 	return 0;
 }
-__initcall(uv_bau_init);
-__initcall(uv_ptc_init);
+core_initcall(uv_bau_init);
+core_initcall(uv_ptc_init);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 3339917..725ef4d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -15,6 +15,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
+#include <linux/kgdb.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
@@ -108,15 +109,6 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 	dec_preempt_count();
 }
 
-#ifdef CONFIG_X86_32
-static inline void
-die_if_kernel(const char *str, struct pt_regs *regs, long err)
-{
-	if (!user_mode_vm(regs))
-		die(str, regs, err);
-}
-#endif
-
 static void __kprobes
 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
 	long error_code, siginfo_t *info)
@@ -460,6 +452,11 @@ void restart_nmi(void)
 /* May run on IST stack. */
 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
 {
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
+			== NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 #ifdef CONFIG_KPROBES
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
 			== NOTIFY_STOP)
@@ -529,22 +526,34 @@ asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
+	int user_icebp = 0;
 	unsigned long dr6;
 	int si_code;
 
 	get_debugreg(dr6, 6);
 
+	/* Filter out all the reserved bits which are preset to 1 */
+	dr6 &= ~DR6_RESERVED;
+
+	/*
+	 * If dr6 has no reason to give us about the origin of this trap,
+	 * then it's very likely the result of an icebp/int01 trap.
+	 * User wants a sigtrap for that.
+	 */
+	if (!dr6 && user_mode(regs))
+		user_icebp = 1;
+
 	/* Catch kmemcheck conditions first of all! */
 	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		return;
 
 	/* DR6 may or may not be cleared by the CPU */
 	set_debugreg(0, 6);
+
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
-	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
-	tsk->thread.debugctlmsr = 0;
+	clear_tsk_thread_flag(tsk, TIF_BLOCKSTEP);
 
 	/* Store the virtualized DR6 value */
 	tsk->thread.debugreg6 = dr6;
@@ -575,62 +584,74 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 		regs->flags &= ~X86_EFLAGS_TF;
 	}
 	si_code = get_si_code(tsk->thread.debugreg6);
-	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
 		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
 
 	return;
 }
 
-#ifdef CONFIG_X86_64
-static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
-{
-	if (fixup_exception(regs))
-		return 1;
-
-	notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
-	/* Illegal floating point operation in the kernel */
-	current->thread.trap_no = trapnr;
-	die(str, regs, 0);
-	return 0;
-}
-#endif
-
 /*
  * Note that we play around with the 'TS' bit in an attempt to get
  * the correct behaviour even in the presence of the asynchronous
  * IRQ13 behaviour
  */
-void math_error(void __user *ip)
+void math_error(struct pt_regs *regs, int error_code, int trapnr)
 {
-	struct task_struct *task;
+	struct task_struct *task = current;
 	siginfo_t info;
-	unsigned short cwd, swd, err;
+	unsigned short err;
+	char *str = (trapnr == 16) ? "fpu exception" : "simd exception";
+
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, SIGFPE) == NOTIFY_STOP)
+		return;
+	conditional_sti(regs);
+
+	if (!user_mode_vm(regs))
+	{
+		if (!fixup_exception(regs)) {
+			task->thread.error_code = error_code;
+			task->thread.trap_no = trapnr;
+			die(str, regs, error_code);
+		}
+		return;
+	}
 
 	/*
 	 * Save the info for the exception handler and clear the error.
 	 */
-	task = current;
 	save_init_fpu(task);
-	task->thread.trap_no = 16;
-	task->thread.error_code = 0;
+	task->thread.trap_no = trapnr;
+	task->thread.error_code = error_code;
 	info.si_signo = SIGFPE;
 	info.si_errno = 0;
-	info.si_addr = ip;
-	/*
-	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
-	 * status.  0x3f is the exception bits in these regs, 0x200 is the
-	 * C1 reg you need in case of a stack fault, 0x040 is the stack
-	 * fault bit.  We should only be taking one exception at a time,
-	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't synchronizing its FPU usage
-	 * and it will suffer the consequences since we won't be able to
-	 * fully reproduce the context of the exception
-	 */
-	cwd = get_fpu_cwd(task);
-	swd = get_fpu_swd(task);
+	info.si_addr = (void __user *)regs->ip;
+	if (trapnr == 16) {
+		unsigned short cwd, swd;
+		/*
+		 * (~cwd & swd) will mask out exceptions that are not set to unmasked
+		 * status.  0x3f is the exception bits in these regs, 0x200 is the
+		 * C1 reg you need in case of a stack fault, 0x040 is the stack
+		 * fault bit.  We should only be taking one exception at a time,
+		 * so if this combination doesn't produce any single exception,
+		 * then we have a bad program that isn't synchronizing its FPU usage
+		 * and it will suffer the consequences since we won't be able to
+		 * fully reproduce the context of the exception
+		 */
+		cwd = get_fpu_cwd(task);
+		swd = get_fpu_swd(task);
 
-	err = swd & ~cwd;
+		err = swd & ~cwd;
+	} else {
+		/*
+		 * The SIMD FPU exceptions are handled a little differently, as there
+		 * is only a single status/control register.  Thus, to determine which
+		 * unmasked exception was caught we must mask the exception mask bits
+		 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
+		 */
+		unsigned short mxcsr = get_fpu_mxcsr(task);
+		err = ~(mxcsr >> 7) & mxcsr;
+	}
 
 	if (err & 0x001) {	/* Invalid op */
 		/*
@@ -659,97 +680,17 @@ void math_error(void __user *ip)
 
 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
 {
-	conditional_sti(regs);
-
 #ifdef CONFIG_X86_32
 	ignore_fpu_irq = 1;
-#else
-	if (!user_mode(regs) &&
-	    kernel_math_error(regs, "kernel x87 math error", 16))
-		return;
 #endif
 
-	math_error((void __user *)regs->ip);
-}
-
-static void simd_math_error(void __user *ip)
-{
-	struct task_struct *task;
-	siginfo_t info;
-	unsigned short mxcsr;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 19;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = ip;
-	/*
-	 * The SIMD FPU exceptions are handled a little differently, as there
-	 * is only a single status/control register.  Thus, to determine which
-	 * unmasked exception was caught we must mask the exception mask bits
-	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
-	 */
-	mxcsr = get_fpu_mxcsr(task);
-	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-	case 0x000:
-	default:
-		break;
-	case 0x001: /* Invalid Op */
-		info.si_code = FPE_FLTINV;
-		break;
-	case 0x002: /* Denormalize */
-	case 0x010: /* Underflow */
-		info.si_code = FPE_FLTUND;
-		break;
-	case 0x004: /* Zero Divide */
-		info.si_code = FPE_FLTDIV;
-		break;
-	case 0x008: /* Overflow */
-		info.si_code = FPE_FLTOVF;
-		break;
-	case 0x020: /* Precision */
-		info.si_code = FPE_FLTRES;
-		break;
-	}
-	force_sig_info(SIGFPE, &info, task);
+	math_error(regs, error_code, 16);
 }
 
 dotraplinkage void
 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
 {
-	conditional_sti(regs);
-
-#ifdef CONFIG_X86_32
-	if (cpu_has_xmm) {
-		/* Handle SIMD FPU exceptions on PIII+ processors. */
-		ignore_fpu_irq = 1;
-		simd_math_error((void __user *)regs->ip);
-		return;
-	}
-	/*
-	 * Handle strange cache flush from user space exception
-	 * in all other cases.  This is undocumented behaviour.
-	 */
-	if (regs->flags & X86_VM_MASK) {
-		handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
-		return;
-	}
-	current->thread.trap_no = 19;
-	current->thread.error_code = error_code;
-	die_if_kernel("cache flush denied", regs, error_code);
-	force_sig(SIGSEGV, current);
-#else
-	if (!user_mode(regs) &&
-			kernel_math_error(regs, "kernel simd math error", 19))
-		return;
-	simd_math_error((void __user *)regs->ip);
-#endif
+	math_error(regs, error_code, 19);
 }
 
 dotraplinkage void
@@ -876,6 +817,16 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
 }
 #endif
 
+/* Set of traps needed for early debugging. */
+void __init early_trap_init(void)
+{
+	set_intr_gate_ist(1, &debug, DEBUG_STACK);
+	/* int3 can be called from all */
+	set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
+	set_intr_gate(14, &page_fault);
+	load_idt(&idt_descr);
+}
+
 void __init trap_init(void)
 {
 	int i;
@@ -889,10 +840,7 @@ void __init trap_init(void)
 #endif
 
 	set_intr_gate(0, &divide_error);
-	set_intr_gate_ist(1, &debug, DEBUG_STACK);
 	set_intr_gate_ist(2, &nmi, NMI_STACK);
-	/* int3 can be called from all */
-	set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
 	/* int4 can be called from all */
 	set_system_intr_gate(4, &overflow);
 	set_intr_gate(5, &bounds);
@@ -908,7 +856,6 @@ void __init trap_init(void)
 	set_intr_gate(11, &segment_not_present);
 	set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
 	set_intr_gate(13, &general_protection);
-	set_intr_gate(14, &page_fault);
 	set_intr_gate(15, &spurious_interrupt_bug);
 	set_intr_gate(16, &coprocessor_error);
 	set_intr_gate(17, &alignment_check);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 597683a..9faf91a 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@ u64 native_sched_clock(void)
 	 *   unstable. We do this because unlike Time Of Day,
 	 *   the scheduler clock tolerates small errors and it's
 	 *   very important for it to be as fast as the platform
-	 *   can achive it. )
+	 *   can achieve it. )
 	 */
 	if (unlikely(tsc_disabled)) {
 		/* No locking but a rare wrong value is not a big deal: */
@@ -740,7 +740,7 @@ static cycle_t __vsyscall_fn vread_tsc(void)
 }
 #endif
 
-static void resume_tsc(void)
+static void resume_tsc(struct clocksource *cs)
 {
 	clocksource_tsc.cycle_last = 0;
 }
@@ -806,7 +806,7 @@ static void __init check_system_tsc_reliable(void)
 	unsigned long res_low, res_high;
 
 	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
-	/* Geode_LX - the OLPC CPU has a possibly a very reliable TSC */
+	/* Geode_LX - the OLPC CPU has a very reliable TSC */
 	if (res_low & RTSC_SUSP)
 		tsc_clocksource_reliable = 1;
 #endif
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
index ece73d8..1132129 100644
--- a/arch/x86/kernel/uv_irq.c
+++ b/arch/x86/kernel/uv_irq.c
@@ -10,6 +10,7 @@
 
 #include <linux/module.h>
 #include <linux/rbtree.h>
+#include <linux/slab.h>
 #include <linux/irq.h>
 
 #include <asm/apic.h>
@@ -43,7 +44,7 @@ static void uv_ack_apic(unsigned int irq)
 	ack_APIC_irq();
 }
 
-struct irq_chip uv_irq_chip = {
+static struct irq_chip uv_irq_chip = {
 	.name		= "UV-CORE",
 	.startup	= uv_noop_ret,
 	.shutdown	= uv_noop,
@@ -140,7 +141,7 @@ int uv_irq_2_mmr_info(int irq, unsigned long *offset, int *pnode)
  */
 static int
 arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
-		       unsigned long mmr_offset, int restrict)
+		       unsigned long mmr_offset, int limit)
 {
 	const struct cpumask *eligible_cpu = cpumask_of(cpu);
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -159,7 +160,7 @@ arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	if (err != 0)
 		return err;
 
-	if (restrict == UV_AFFINITY_CPU)
+	if (limit == UV_AFFINITY_CPU)
 		desc->status |= IRQ_NO_BALANCING;
 	else
 		desc->status |= IRQ_MOVE_PCNTXT;
@@ -213,7 +214,7 @@ static int uv_set_irq_affinity(unsigned int irq, const struct cpumask *mask)
 	unsigned long mmr_value;
 	struct uv_IO_APIC_route_entry *entry;
 	unsigned long mmr_offset;
-	unsigned mmr_pnode;
+	int mmr_pnode;
 
 	if (set_desc_affinity(desc, mask, &dest))
 		return -1;
@@ -247,7 +248,7 @@ static int uv_set_irq_affinity(unsigned int irq, const struct cpumask *mask)
  * interrupt is raised.
  */
 int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
-		 unsigned long mmr_offset, int restrict)
+		 unsigned long mmr_offset, int limit)
 {
 	int irq, ret;
 
@@ -257,7 +258,7 @@ int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
 		return -EBUSY;
 
 	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset,
-		restrict);
+		limit);
 	if (ret == irq)
 		uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade);
 	else
diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c
index 36afb98..309c70f 100644
--- a/arch/x86/kernel/uv_sysfs.c
+++ b/arch/x86/kernel/uv_sysfs.c
@@ -54,19 +54,19 @@ static int __init sgi_uv_sysfs_init(void)
 	if (!sgi_uv_kobj)
 		sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
 	if (!sgi_uv_kobj) {
-		printk(KERN_WARNING "kobject_create_and_add sgi_uv failed \n");
+		printk(KERN_WARNING "kobject_create_and_add sgi_uv failed\n");
 		return -EINVAL;
 	}
 
 	ret = sysfs_create_file(sgi_uv_kobj, &partition_id_attr.attr);
 	if (ret) {
-		printk(KERN_WARNING "sysfs_create_file partition_id failed \n");
+		printk(KERN_WARNING "sysfs_create_file partition_id failed\n");
 		return ret;
 	}
 
 	ret = sysfs_create_file(sgi_uv_kobj, &coherence_id_attr.attr);
 	if (ret) {
-		printk(KERN_WARNING "sysfs_create_file coherence_id failed \n");
+		printk(KERN_WARNING "sysfs_create_file coherence_id failed\n");
 		return ret;
 	}
 
diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 3c84aa0..56e421b 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -19,6 +19,7 @@
  *  Copyright (c) Dimitri Sivanich
  */
 #include <linux/clockchips.h>
+#include <linux/slab.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -282,10 +283,21 @@ static int uv_rtc_unset_timer(int cpu, int force)
 
 /*
  * Read the RTC.
+ *
+ * Starting with HUB rev 2.0, the UV RTC register is replicated across all
+ * cachelines of it's own page.  This allows faster simultaneous reads
+ * from a given socket.
  */
 static cycle_t uv_read_rtc(struct clocksource *cs)
 {
-	return (cycle_t)uv_read_local_mmr(UVH_RTC);
+	unsigned long offset;
+
+	if (uv_get_min_hub_revision_id() == 1)
+		offset = 0;
+	else
+		offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE;
+
+	return (cycle_t)uv_read_local_mmr(UVH_RTC | offset);
 }
 
 /*
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 34a279a..e680ea5 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -49,11 +49,6 @@ extern int no_broadcast;
 char visws_board_type	= -1;
 char visws_board_rev	= -1;
 
-int is_visws_box(void)
-{
-	return visws_board_type >= 0;
-}
-
 static void __init visws_time_init(void)
 {
 	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
@@ -242,6 +237,8 @@ void __init visws_early_detect(void)
 	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
 	x86_init.irqs.trap_init = visws_trap_init;
 	x86_init.timers.timer_init = visws_time_init;
+	x86_init.pci.init = pci_visws_init;
+	x86_init.pci.init_irq = x86_init_noop;
 
 	/*
 	 * Install reboot quirks:
@@ -508,7 +505,7 @@ static struct irq_chip cobalt_irq_type = {
  */
 static unsigned int startup_piix4_master_irq(unsigned int irq)
 {
-	init_8259A(0);
+	legacy_pic->init(0);
 
 	return startup_cobalt_irq(irq);
 }
@@ -532,9 +529,6 @@ static struct irq_chip piix4_master_irq_type = {
 
 static struct irq_chip piix4_virtual_irq_type = {
 	.name =		"PIIX4-virtual",
-	.shutdown =	disable_8259A_irq,
-	.enable =	enable_8259A_irq,
-	.disable =	disable_8259A_irq,
 };
 
 
@@ -559,7 +553,7 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 	struct irq_desc *desc;
 	unsigned long flags;
 
-	spin_lock_irqsave(&i8259A_lock, flags);
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
 
 	/* Find out what's interrupting in the PIIX4 master 8259 */
 	outb(0x0c, 0x20);		/* OCW3 Poll command */
@@ -596,7 +590,7 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 		outb(0x60 + realirq, 0x20);
 	}
 
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 
 	desc = irq_to_desc(realirq);
 
@@ -609,12 +603,12 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id)
 		handle_IRQ_event(realirq, desc->action);
 
 	if (!(desc->status & IRQ_DISABLED))
-		enable_8259A_irq(realirq);
+		legacy_pic->chip->unmask(realirq);
 
 	return IRQ_HANDLED;
 
 out_unlock:
-	spin_unlock_irqrestore(&i8259A_lock, flags);
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 	return IRQ_NONE;
 }
 
@@ -628,6 +622,12 @@ static struct irqaction cascade_action = {
 	.name =		"cascade",
 };
 
+static inline void set_piix4_virtual_irq_type(void)
+{
+	piix4_virtual_irq_type.shutdown = i8259A_chip.mask;
+	piix4_virtual_irq_type.enable =	i8259A_chip.unmask;
+	piix4_virtual_irq_type.disable = i8259A_chip.mask;
+}
 
 void init_VISWS_APIC_irqs(void)
 {
@@ -653,6 +653,7 @@ void init_VISWS_APIC_irqs(void)
 			desc->chip = &piix4_master_irq_type;
 		}
 		else if (i < CO_IRQ_APIC0) {
+			set_piix4_virtual_irq_type();
 			desc->chip = &piix4_virtual_irq_type;
 		}
 		else if (IS_CO_APIC(i)) {
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index d430e4c..ce9fbac 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -28,11 +28,13 @@
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/sched.h>
+#include <linux/gfp.h>
 #include <asm/vmi.h>
 #include <asm/io.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/apic.h>
+#include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
@@ -266,30 +268,6 @@ static void vmi_nop(void)
 {
 }
 
-#ifdef CONFIG_HIGHPTE
-static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	void *va = kmap_atomic(page, type);
-
-	/*
-	 * Internally, the VMI ROM must map virtual addresses to physical
-	 * addresses for processing MMU updates.  By the time MMU updates
-	 * are issued, this information is typically already lost.
-	 * Fortunately, the VMI provides a cache of mapping slots for active
-	 * page tables.
-	 *
-	 * We use slot zero for the linear mapping of physical memory, and
-	 * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
-	 *
-	 *  args:                 SLOT                 VA    COUNT PFN
-	 */
-	BUG_ON(type != KM_PTE0 && type != KM_PTE1);
-	vmi_ops.set_linear_mapping((type - KM_PTE0)+1, va, 1, page_to_pfn(page));
-
-	return va;
-}
-#endif
-
 static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
 {
 	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
@@ -640,6 +618,12 @@ static inline int __init activate_vmi(void)
 	u64 reloc;
 	const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
 
+	/*
+	 * Prevent page tables from being allocated in highmem, even if
+	 * CONFIG_HIGHPTE is enabled.
+	 */
+	__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+
 	if (call_vrom_func(vmi_rom, vmi_init) != 0) {
 		printk(KERN_ERR "VMI ROM failed to initialize!");
 		return 0;
@@ -778,10 +762,6 @@ static inline int __init activate_vmi(void)
 
 	/* Set linear is needed in all cases */
 	vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-#ifdef CONFIG_HIGHPTE
-	if (vmi_ops.set_linear_mapping)
-		pv_mmu_ops.kmap_atomic_pte = vmi_kmap_atomic_pte;
-#endif
 
 	/*
 	 * These MUST always be patched.  Don't support indirect jumps
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 74c92bb..5e1ff66 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -79,11 +79,7 @@ unsigned long vmi_tsc_khz(void)
 
 static inline unsigned int vmi_get_timer_vector(void)
 {
-#ifdef CONFIG_X86_IO_APIC
-	return FIRST_DEVICE_VECTOR;
-#else
-	return FIRST_EXTERNAL_VECTOR;
-#endif
+	return IRQ0_VECTOR;
 }
 
 /** vmi clockchip */
@@ -171,7 +167,7 @@ static int vmi_timer_next_event(unsigned long delta,
 {
 	/* Unfortunately, set_next_event interface only passes relative
 	 * expiry, but we want absolute expiry.  It'd be better if were
-	 * were passed an aboslute expiry, since a bunch of time may
+	 * were passed an absolute expiry, since a bunch of time may
 	 * have been stolen between the time the delta is computed and
 	 * when we set the alarm below. */
 	cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index f3d77d7..d0bb522 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -291,8 +291,8 @@ SECTIONS
 	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
 		__smp_locks = .;
 		*(.smp_locks)
-		__smp_locks_end = .;
 		. = ALIGN(PAGE_SIZE);
+		__smp_locks_end = .;
 	}
 
 #ifdef CONFIG_X86_64
@@ -341,7 +341,7 @@ SECTIONS
  * Per-cpu symbols which need to be offset from __per_cpu_load
  * for the boot processor.
  */
-#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
 INIT_PER_CPU(gdt_page);
 INIT_PER_CPU(irq_stack_union);
 
@@ -352,7 +352,7 @@ INIT_PER_CPU(irq_stack_union);
 	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 
 #ifdef CONFIG_SMP
-. = ASSERT((per_cpu__irq_stack_union == 0),
+. = ASSERT((irq_stack_union == 0),
            "irq_stack_union is not at start of per-cpu area");
 #endif
 
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 9055e58..1c0c6ab 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -301,7 +301,8 @@ static int __init vsyscall_init(void)
 	register_sysctl_table(kernel_root_table2);
 #endif
 	on_each_cpu(cpu_vsyscall_init, NULL, 1);
-	hotcpu_notifier(cpu_vsyscall_notifier, 0);
+	/* notifier priority > KVM */
+	hotcpu_notifier(cpu_vsyscall_notifier, 30);
 	return 0;
 }
 
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 619f7f8..1b950d1 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -26,7 +26,8 @@ EXPORT_SYMBOL(__put_user_2);
 EXPORT_SYMBOL(__put_user_4);
 EXPORT_SYMBOL(__put_user_8);
 
-EXPORT_SYMBOL(copy_user_generic);
+EXPORT_SYMBOL(copy_user_generic_string);
+EXPORT_SYMBOL(copy_user_generic_unrolled);
 EXPORT_SYMBOL(__copy_user_nocache);
 EXPORT_SYMBOL(_copy_from_user);
 EXPORT_SYMBOL(_copy_to_user);
@@ -53,7 +54,6 @@ EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(__memcpy);
 
 EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(init_level4_pgt);
 #ifndef CONFIG_PARAVIRT
 EXPORT_SYMBOL(native_load_gs_index);
 #endif
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index ccd179d..cd6da6b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -4,9 +4,12 @@
  *  For licencing details see kernel-base/COPYING
  */
 #include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
 
 #include <asm/bios_ebda.h>
 #include <asm/paravirt.h>
+#include <asm/pci_x86.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
 #include <asm/apic.h>
@@ -70,16 +73,29 @@ struct x86_init_ops x86_init __initdata = {
 	.iommu = {
 		.iommu_init		= iommu_init_noop,
 	},
+
+	.pci = {
+		.init			= x86_default_pci_init,
+		.init_irq		= x86_default_pci_init_irq,
+		.fixup_irqs		= x86_default_pci_fixup_irqs,
+	},
 };
 
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
 };
 
+static void default_nmi_init(void) { };
+static int default_i8042_detect(void) { return 1; };
+
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
 	.get_wallclock			= mach_get_cmos_time,
 	.set_wallclock			= mach_set_rtc_mmss,
 	.iommu_shutdown			= iommu_shutdown_noop,
 	.is_untracked_pat_range		= is_ISA_range,
+	.nmi_init			= default_nmi_init,
+	.i8042_detect			= default_i8042_detect
 };
+
+EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index c5ee17e..37e68fc 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -99,7 +99,7 @@ int save_i387_xstate(void __user *buf)
 		if (err)
 			return err;
 
-		if (task_thread_info(tsk)->status & TS_XSAVE)
+		if (use_xsave())
 			err = xsave_user(buf);
 		else
 			err = fxsave_user(buf);
@@ -109,14 +109,14 @@ int save_i387_xstate(void __user *buf)
 		task_thread_info(tsk)->status &= ~TS_USEDFPU;
 		stts();
 	} else {
-		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
 				   xstate_size))
 			return -1;
 	}
 
 	clear_used_math(); /* trigger finit */
 
-	if (task_thread_info(tsk)->status & TS_XSAVE) {
+	if (use_xsave()) {
 		struct _fpstate __user *fx = buf;
 		struct _xstate __user *x = buf;
 		u64 xstate_bv;
@@ -225,7 +225,7 @@ int restore_i387_xstate(void __user *buf)
 		clts();
 		task_thread_info(current)->status |= TS_USEDFPU;
 	}
-	if (task_thread_info(tsk)->status & TS_XSAVE)
+	if (use_xsave())
 		err = restore_user_xstate(buf);
 	else
 		err = fxrstor_checking((__force struct i387_fxsave_struct *)
@@ -337,6 +337,7 @@ void __ref xsave_cntxt_init(void)
 	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
 	xstate_size = ebx;
 
+	update_regset_xstate_info(xstate_size, pcntxt_mask);
 	prepare_fx_sw_frame();
 
 	setup_xstate_init();
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 4cd4983..970bbd4 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -29,6 +29,7 @@ config KVM
 	select HAVE_KVM_EVENTFD
 	select KVM_APIC_ARCHITECTURE
 	select USER_RETURN_NOTIFIER
+	select KVM_MMIO
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
@@ -65,6 +66,7 @@ config KVM_AMD
 
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
+source drivers/vhost/Kconfig
 source drivers/lguest/Kconfig
 source drivers/virtio/Kconfig
 
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 7e8faea..5ac0bb4 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -32,7 +32,8 @@
 #include <linux/module.h>
 #include <asm/kvm_emulate.h>
 
-#include "mmu.h"		/* for is_long_mode() */
+#include "x86.h"
+#include "tss.h"
 
 /*
  * Opcode effective-address decode tables.
@@ -50,6 +51,8 @@
 #define DstReg      (2<<1)	/* Register operand. */
 #define DstMem      (3<<1)	/* Memory operand. */
 #define DstAcc      (4<<1)      /* Destination Accumulator */
+#define DstDI       (5<<1)	/* Destination is in ES:(E)DI */
+#define DstMem64    (6<<1)	/* 64bit memory operand */
 #define DstMask     (7<<1)
 /* Source operand type. */
 #define SrcNone     (0<<4)	/* No source operand. */
@@ -63,6 +66,7 @@
 #define SrcOne      (7<<4)	/* Implied '1' */
 #define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
 #define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
+#define SrcSI       (0xa<<4)	/* Source is in the DS:RSI */
 #define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
 #define ModRM       (1<<8)
@@ -76,6 +80,8 @@
 #define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
 #define GroupMask   0xff        /* Group number stored in bits 0:7 */
 /* Misc flags */
+#define Lock        (1<<26) /* lock prefix is allowed for the instruction */
+#define Priv        (1<<27) /* instruction generates #GP if current CPL != 0 */
 #define No64	    (1<<28)
 /* Source 2 operand type */
 #define Src2None    (0<<29)
@@ -83,44 +89,48 @@
 #define Src2ImmByte (2<<29)
 #define Src2One     (3<<29)
 #define Src2Imm16   (4<<29)
+#define Src2Mem16   (5<<29) /* Used for Ep encoding. First argument has to be
+			       in memory and second argument is located
+			       immediately after the first one in memory. */
 #define Src2Mask    (7<<29)
 
 enum {
 	Group1_80, Group1_81, Group1_82, Group1_83,
 	Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
+	Group8, Group9,
 };
 
 static u32 opcode_table[256] = {
 	/* 0x00 - 0x07 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
 	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x08 - 0x0F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
 	ImplicitOps | Stack | No64, 0,
 	/* 0x10 - 0x17 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
 	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x18 - 0x1F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
 	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x20 - 0x27 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
 	/* 0x28 - 0x2F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	0, 0, 0, 0,
 	/* 0x30 - 0x37 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
 	0, 0, 0, 0,
 	/* 0x38 - 0x3F */
@@ -144,8 +154,8 @@ static u32 opcode_table[256] = {
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
 	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
+	DstDI | ByteOp | Mov | String, DstDI | Mov | String, /* insb, insw/insd */
+	SrcSI | ByteOp | ImplicitOps | String, SrcSI | ImplicitOps | String, /* outsb, outsw/outsd */
 	/* 0x70 - 0x77 */
 	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
 	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
@@ -156,7 +166,7 @@ static u32 opcode_table[256] = {
 	Group | Group1_80, Group | Group1_81,
 	Group | Group1_82, Group | Group1_83,
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
 	/* 0x88 - 0x8F */
 	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
 	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
@@ -170,12 +180,12 @@ static u32 opcode_table[256] = {
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
 	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	ByteOp | SrcSI | DstDI | Mov | String, SrcSI | DstDI | Mov | String,
+	ByteOp | SrcSI | DstDI | String, SrcSI | DstDI | String,
 	/* 0xA8 - 0xAF */
-	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	0, 0, ByteOp | DstDI | Mov | String, DstDI | Mov | String,
+	ByteOp | SrcSI | DstAcc | Mov | String, SrcSI | DstAcc | Mov | String,
+	ByteOp | DstDI | String, DstDI | String,
 	/* 0xB0 - 0xB7 */
 	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
 	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
@@ -201,16 +211,16 @@ static u32 opcode_table[256] = {
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE0 - 0xE7 */
 	0, 0, 0, 0,
-	ByteOp | SrcImmUByte, SrcImmUByte,
-	ByteOp | SrcImmUByte, SrcImmUByte,
+	ByteOp | SrcImmUByte | DstAcc, SrcImmUByte | DstAcc,
+	ByteOp | SrcImmUByte | DstAcc, SrcImmUByte | DstAcc,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
 	SrcImmU | Src2Imm16 | No64, SrcImmByte | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	SrcNone | ByteOp | DstAcc, SrcNone | DstAcc,
+	SrcNone | ByteOp | DstAcc, SrcNone | DstAcc,
 	/* 0xF0 - 0xF7 */
 	0, 0, 0, 0,
-	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
+	ImplicitOps | Priv, ImplicitOps, Group | Group3_Byte, Group | Group3,
 	/* 0xF8 - 0xFF */
 	ImplicitOps, 0, ImplicitOps, ImplicitOps,
 	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
@@ -218,16 +228,20 @@ static u32 opcode_table[256] = {
 
 static u32 twobyte_table[256] = {
 	/* 0x00 - 0x0F */
-	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+	0, Group | GroupDual | Group7, 0, 0,
+	0, ImplicitOps, ImplicitOps | Priv, 0,
+	ImplicitOps | Priv, ImplicitOps | Priv, 0, 0,
+	0, ImplicitOps | ModRM, 0, 0,
 	/* 0x10 - 0x1F */
 	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x20 - 0x2F */
-	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+	ModRM | ImplicitOps | Priv, ModRM | Priv,
+	ModRM | ImplicitOps | Priv, ModRM | Priv,
+	0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x30 - 0x3F */
-	ImplicitOps, 0, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0,
+	ImplicitOps | Priv, 0, ImplicitOps | Priv, 0,
+	ImplicitOps, ImplicitOps | Priv, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x40 - 0x47 */
 	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
@@ -257,21 +271,23 @@ static u32 twobyte_table[256] = {
 	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
 	/* 0xA8 - 0xAF */
 	ImplicitOps | Stack, ImplicitOps | Stack,
-	0, DstMem | SrcReg | ModRM | BitOp,
+	0, DstMem | SrcReg | ModRM | BitOp | Lock,
 	DstMem | SrcReg | Src2ImmByte | ModRM,
 	DstMem | SrcReg | Src2CL | ModRM,
 	ModRM, 0,
 	/* 0xB0 - 0xB7 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
-	    DstMem | SrcReg | ModRM | BitOp,
+	ByteOp | DstMem | SrcReg | ModRM | Lock, DstMem | SrcReg | ModRM | Lock,
+	0, DstMem | SrcReg | ModRM | BitOp | Lock,
 	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
 	    DstReg | SrcMem16 | ModRM | Mov,
 	/* 0xB8 - 0xBF */
-	0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
+	0, 0,
+	Group | Group8, DstMem | SrcReg | ModRM | BitOp | Lock,
 	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
 	    DstReg | SrcMem16 | ModRM | Mov,
 	/* 0xC0 - 0xCF */
-	0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
+	0, 0, 0, DstMem | SrcReg | ModRM | Mov,
+	0, 0, 0, Group | GroupDual | Group9,
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xD0 - 0xDF */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
@@ -283,25 +299,41 @@ static u32 twobyte_table[256] = {
 
 static u32 group_table[] = {
 	[Group1_80*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | Lock,
+	ByteOp | DstMem | SrcImm | ModRM,
 	[Group1_81*8] =
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM | Lock,
+	DstMem | SrcImm | ModRM,
 	[Group1_82*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64 | Lock,
+	ByteOp | DstMem | SrcImm | ModRM | No64,
 	[Group1_83*8] =
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM,
 	[Group1A*8] =
 	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
 	[Group3_Byte*8] =
@@ -318,26 +350,42 @@ static u32 group_table[] = {
 	[Group5*8] =
 	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
 	SrcMem | ModRM | Stack, 0,
-	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
+	SrcMem | ModRM | Stack, SrcMem | ModRM | Src2Mem16 | ImplicitOps,
+	SrcMem | ModRM | Stack, 0,
 	[Group7*8] =
-	0, 0, ModRM | SrcMem, ModRM | SrcMem,
+	0, 0, ModRM | SrcMem | Priv, ModRM | SrcMem | Priv,
 	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
+	SrcMem16 | ModRM | Mov | Priv, SrcMem | ModRM | ByteOp | Priv,
+	[Group8*8] =
+	0, 0, 0, 0,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM | Lock,
+	DstMem | SrcImmByte | ModRM | Lock, DstMem | SrcImmByte | ModRM | Lock,
+	[Group9*8] =
+	0, DstMem64 | ModRM | Lock, 0, 0, 0, 0, 0, 0,
 };
 
 static u32 group2_table[] = {
 	[Group7*8] =
-	SrcNone | ModRM, 0, 0, SrcNone | ModRM,
+	SrcNone | ModRM | Priv, 0, 0, SrcNone | ModRM | Priv,
 	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, 0,
+	SrcMem16 | ModRM | Mov | Priv, 0,
+	[Group9*8] =
+	0, 0, 0, 0, 0, 0, 0, 0,
 };
 
 /* EFLAGS bit definitions. */
+#define EFLG_ID (1<<21)
+#define EFLG_VIP (1<<20)
+#define EFLG_VIF (1<<19)
+#define EFLG_AC (1<<18)
 #define EFLG_VM (1<<17)
 #define EFLG_RF (1<<16)
+#define EFLG_IOPL (3<<12)
+#define EFLG_NT (1<<14)
 #define EFLG_OF (1<<11)
 #define EFLG_DF (1<<10)
 #define EFLG_IF (1<<9)
+#define EFLG_TF (1<<8)
 #define EFLG_SF (1<<7)
 #define EFLG_ZF (1<<6)
 #define EFLG_AF (1<<4)
@@ -522,7 +570,7 @@ static u32 group2_table[] = {
 #define insn_fetch(_type, _size, _eip)                                  \
 ({	unsigned long _x;						\
 	rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size));		\
-	if (rc != 0)							\
+	if (rc != X86EMUL_CONTINUE)					\
 		goto done;						\
 	(_eip) += (_size);						\
 	(_type)_x;							\
@@ -598,40 +646,40 @@ static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
 
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
 			      struct x86_emulate_ops *ops,
-			      unsigned long linear, u8 *dest)
+			      unsigned long eip, u8 *dest)
 {
 	struct fetch_cache *fc = &ctxt->decode.fetch;
 	int rc;
-	int size;
-
-	if (linear < fc->start || linear >= fc->end) {
-		size = min(15UL, PAGE_SIZE - offset_in_page(linear));
-		rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
-		if (rc)
+	int size, cur_size;
+
+	if (eip == fc->end) {
+		cur_size = fc->end - fc->start;
+		size = min(15UL - cur_size, PAGE_SIZE - offset_in_page(eip));
+		rc = ops->fetch(ctxt->cs_base + eip, fc->data + cur_size,
+				size, ctxt->vcpu, NULL);
+		if (rc != X86EMUL_CONTINUE)
 			return rc;
-		fc->start = linear;
-		fc->end = linear + size;
+		fc->end += size;
 	}
-	*dest = fc->data[linear - fc->start];
-	return 0;
+	*dest = fc->data[eip - fc->start];
+	return X86EMUL_CONTINUE;
 }
 
 static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
 			 struct x86_emulate_ops *ops,
 			 unsigned long eip, void *dest, unsigned size)
 {
-	int rc = 0;
+	int rc;
 
 	/* x86 instructions are limited to 15 bytes. */
-	if (eip + size - ctxt->decode.eip_orig > 15)
+	if (eip + size - ctxt->eip > 15)
 		return X86EMUL_UNHANDLEABLE;
-	eip += ctxt->cs_base;
 	while (size--) {
 		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
-		if (rc)
+		if (rc != X86EMUL_CONTINUE)
 			return rc;
 	}
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 /*
@@ -661,11 +709,11 @@ static int read_descriptor(struct x86_emulate_ctxt *ctxt,
 		op_bytes = 3;
 	*address = 0;
 	rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
-			   ctxt->vcpu);
-	if (rc)
+			   ctxt->vcpu, NULL);
+	if (rc != X86EMUL_CONTINUE)
 		return rc;
 	rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
-			   ctxt->vcpu);
+			   ctxt->vcpu, NULL);
 	return rc;
 }
 
@@ -742,7 +790,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	u8 sib;
 	int index_reg = 0, base_reg = 0, scale;
-	int rc = 0;
+	int rc = X86EMUL_CONTINUE;
 
 	if (c->rex_prefix) {
 		c->modrm_reg = (c->rex_prefix & 4) << 1;	/* REX.R */
@@ -855,7 +903,7 @@ static int decode_abs(struct x86_emulate_ctxt *ctxt,
 		      struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
+	int rc = X86EMUL_CONTINUE;
 
 	switch (c->ad_bytes) {
 	case 2:
@@ -876,19 +924,24 @@ int
 x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
+	int rc = X86EMUL_CONTINUE;
 	int mode = ctxt->mode;
 	int def_op_bytes, def_ad_bytes, group;
 
-	/* Shadow copy of register state. Committed on successful emulation. */
 
+	/* we cannot decode insn before we complete previous rep insn */
+	WARN_ON(ctxt->restart);
+
+	/* Shadow copy of register state. Committed on successful emulation. */
 	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = c->eip_orig = kvm_rip_read(ctxt->vcpu);
+	c->eip = ctxt->eip;
+	c->fetch.start = c->fetch.end = c->eip;
 	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
 	switch (mode) {
 	case X86EMUL_MODE_REAL:
+	case X86EMUL_MODE_VM86:
 	case X86EMUL_MODE_PROT16:
 		def_op_bytes = def_ad_bytes = 2;
 		break;
@@ -974,11 +1027,6 @@ done_prefixes:
 		}
 	}
 
-	if (mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
-		kvm_report_emulation_failure(ctxt->vcpu, "invalid x86/64 instruction");;
-		return -1;
-	}
-
 	if (c->d & Group) {
 		group = c->d & GroupMask;
 		c->modrm = insn_fetch(u8, 1, c->eip);
@@ -1005,7 +1053,7 @@ done_prefixes:
 		rc = decode_modrm(ctxt, ops);
 	else if (c->d & MemAbs)
 		rc = decode_abs(ctxt, ops);
-	if (rc)
+	if (rc != X86EMUL_CONTINUE)
 		goto done;
 
 	if (!c->has_seg_override)
@@ -1016,6 +1064,10 @@ done_prefixes:
 
 	if (c->ad_bytes != 8)
 		c->modrm_ea = (u32)c->modrm_ea;
+
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
 	/*
 	 * Decode and fetch the source operand: register, memory
 	 * or immediate.
@@ -1050,6 +1102,8 @@ done_prefixes:
 			break;
 		}
 		c->src.type = OP_MEM;
+		c->src.ptr = (unsigned long *)c->modrm_ea;
+		c->src.val = 0;
 		break;
 	case SrcImm:
 	case SrcImmU:
@@ -1098,6 +1152,14 @@ done_prefixes:
 		c->src.bytes = 1;
 		c->src.val = 1;
 		break;
+	case SrcSI:
+		c->src.type = OP_MEM;
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->src.ptr = (unsigned long *)
+			register_address(c,  seg_override_base(ctxt, c),
+					 c->regs[VCPU_REGS_RSI]);
+		c->src.val = 0;
+		break;
 	}
 
 	/*
@@ -1127,6 +1189,12 @@ done_prefixes:
 		c->src2.bytes = 1;
 		c->src2.val = 1;
 		break;
+	case Src2Mem16:
+		c->src2.type = OP_MEM;
+		c->src2.bytes = 2;
+		c->src2.ptr = (unsigned long *)(c->modrm_ea + c->src.bytes);
+		c->src2.val = 0;
+		break;
 	}
 
 	/* Decode and fetch the destination operand: register or memory. */
@@ -1139,6 +1207,7 @@ done_prefixes:
 			 c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
 		break;
 	case DstMem:
+	case DstMem64:
 		if ((c->d & ModRM) && c->modrm_mod == 3) {
 			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 			c->dst.type = OP_REG;
@@ -1147,12 +1216,24 @@ done_prefixes:
 			break;
 		}
 		c->dst.type = OP_MEM;
+		c->dst.ptr = (unsigned long *)c->modrm_ea;
+		if ((c->d & DstMask) == DstMem64)
+			c->dst.bytes = 8;
+		else
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.val = 0;
+		if (c->d & BitOp) {
+			unsigned long mask = ~(c->dst.bytes * 8 - 1);
+
+			c->dst.ptr = (void *)c->dst.ptr +
+						   (c->src.val & mask) / 8;
+		}
 		break;
 	case DstAcc:
 		c->dst.type = OP_REG;
-		c->dst.bytes = c->op_bytes;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
-		switch (c->op_bytes) {
+		switch (c->dst.bytes) {
 			case 1:
 				c->dst.val = *(u8 *)c->dst.ptr;
 				break;
@@ -1162,18 +1243,248 @@ done_prefixes:
 			case 4:
 				c->dst.val = *(u32 *)c->dst.ptr;
 				break;
+			case 8:
+				c->dst.val = *(u64 *)c->dst.ptr;
+				break;
 		}
 		c->dst.orig_val = c->dst.val;
 		break;
+	case DstDI:
+		c->dst.type = OP_MEM;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)
+			register_address(c, es_base(ctxt),
+					 c->regs[VCPU_REGS_RDI]);
+		c->dst.val = 0;
+		break;
 	}
 
-	if (c->rip_relative)
-		c->modrm_ea += c->eip;
-
 done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
 
+static int pio_in_emulated(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops,
+			   unsigned int size, unsigned short port,
+			   void *dest)
+{
+	struct read_cache *rc = &ctxt->decode.io_read;
+
+	if (rc->pos == rc->end) { /* refill pio read ahead */
+		struct decode_cache *c = &ctxt->decode;
+		unsigned int in_page, n;
+		unsigned int count = c->rep_prefix ?
+			address_mask(c, c->regs[VCPU_REGS_RCX]) : 1;
+		in_page = (ctxt->eflags & EFLG_DF) ?
+			offset_in_page(c->regs[VCPU_REGS_RDI]) :
+			PAGE_SIZE - offset_in_page(c->regs[VCPU_REGS_RDI]);
+		n = min(min(in_page, (unsigned int)sizeof(rc->data)) / size,
+			count);
+		if (n == 0)
+			n = 1;
+		rc->pos = rc->end = 0;
+		if (!ops->pio_in_emulated(size, port, rc->data, n, ctxt->vcpu))
+			return 0;
+		rc->end = n * size;
+	}
+
+	memcpy(dest, rc->data + rc->pos, size);
+	rc->pos += size;
+	return 1;
+}
+
+static u32 desc_limit_scaled(struct desc_struct *desc)
+{
+	u32 limit = get_desc_limit(desc);
+
+	return desc->g ? (limit << 12) | 0xfff : limit;
+}
+
+static void get_descriptor_table_ptr(struct x86_emulate_ctxt *ctxt,
+				     struct x86_emulate_ops *ops,
+				     u16 selector, struct desc_ptr *dt)
+{
+	if (selector & 1 << 2) {
+		struct desc_struct desc;
+		memset (dt, 0, sizeof *dt);
+		if (!ops->get_cached_descriptor(&desc, VCPU_SREG_LDTR, ctxt->vcpu))
+			return;
+
+		dt->size = desc_limit_scaled(&desc); /* what if limit > 65535? */
+		dt->address = get_desc_base(&desc);
+	} else
+		ops->get_gdt(dt, ctxt->vcpu);
+}
+
+/* allowed just for 8 bytes segments */
+static int read_segment_descriptor(struct x86_emulate_ctxt *ctxt,
+				   struct x86_emulate_ops *ops,
+				   u16 selector, struct desc_struct *desc)
+{
+	struct desc_ptr dt;
+	u16 index = selector >> 3;
+	int ret;
+	u32 err;
+	ulong addr;
+
+	get_descriptor_table_ptr(ctxt, ops, selector, &dt);
+
+	if (dt.size < index * 8 + 7) {
+		kvm_inject_gp(ctxt->vcpu, selector & 0xfffc);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
+	addr = dt.address + index * 8;
+	ret = ops->read_std(addr, desc, sizeof *desc, ctxt->vcpu,  &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT)
+		kvm_inject_page_fault(ctxt->vcpu, addr, err);
+
+       return ret;
+}
+
+/* allowed just for 8 bytes segments */
+static int write_segment_descriptor(struct x86_emulate_ctxt *ctxt,
+				    struct x86_emulate_ops *ops,
+				    u16 selector, struct desc_struct *desc)
+{
+	struct desc_ptr dt;
+	u16 index = selector >> 3;
+	u32 err;
+	ulong addr;
+	int ret;
+
+	get_descriptor_table_ptr(ctxt, ops, selector, &dt);
+
+	if (dt.size < index * 8 + 7) {
+		kvm_inject_gp(ctxt->vcpu, selector & 0xfffc);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
+
+	addr = dt.address + index * 8;
+	ret = ops->write_std(addr, desc, sizeof *desc, ctxt->vcpu, &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT)
+		kvm_inject_page_fault(ctxt->vcpu, addr, err);
+
+	return ret;
+}
+
+static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
+				   struct x86_emulate_ops *ops,
+				   u16 selector, int seg)
+{
+	struct desc_struct seg_desc;
+	u8 dpl, rpl, cpl;
+	unsigned err_vec = GP_VECTOR;
+	u32 err_code = 0;
+	bool null_selector = !(selector & ~0x3); /* 0000-0003 are null */
+	int ret;
+
+	memset(&seg_desc, 0, sizeof seg_desc);
+
+	if ((seg <= VCPU_SREG_GS && ctxt->mode == X86EMUL_MODE_VM86)
+	    || ctxt->mode == X86EMUL_MODE_REAL) {
+		/* set real mode segment descriptor */
+		set_desc_base(&seg_desc, selector << 4);
+		set_desc_limit(&seg_desc, 0xffff);
+		seg_desc.type = 3;
+		seg_desc.p = 1;
+		seg_desc.s = 1;
+		goto load;
+	}
+
+	/* NULL selector is not valid for TR, CS and SS */
+	if ((seg == VCPU_SREG_CS || seg == VCPU_SREG_SS || seg == VCPU_SREG_TR)
+	    && null_selector)
+		goto exception;
+
+	/* TR should be in GDT only */
+	if (seg == VCPU_SREG_TR && (selector & (1 << 2)))
+		goto exception;
+
+	if (null_selector) /* for NULL selector skip all following checks */
+		goto load;
+
+	ret = read_segment_descriptor(ctxt, ops, selector, &seg_desc);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+
+	err_code = selector & 0xfffc;
+	err_vec = GP_VECTOR;
+
+	/* can't load system descriptor into segment selecor */
+	if (seg <= VCPU_SREG_GS && !seg_desc.s)
+		goto exception;
+
+	if (!seg_desc.p) {
+		err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
+		goto exception;
+	}
+
+	rpl = selector & 3;
+	dpl = seg_desc.dpl;
+	cpl = ops->cpl(ctxt->vcpu);
+
+	switch (seg) {
+	case VCPU_SREG_SS:
+		/*
+		 * segment is not a writable data segment or segment
+		 * selector's RPL != CPL or segment selector's RPL != CPL
+		 */
+		if (rpl != cpl || (seg_desc.type & 0xa) != 0x2 || dpl != cpl)
+			goto exception;
+		break;
+	case VCPU_SREG_CS:
+		if (!(seg_desc.type & 8))
+			goto exception;
+
+		if (seg_desc.type & 4) {
+			/* conforming */
+			if (dpl > cpl)
+				goto exception;
+		} else {
+			/* nonconforming */
+			if (rpl > cpl || dpl != cpl)
+				goto exception;
+		}
+		/* CS(RPL) <- CPL */
+		selector = (selector & 0xfffc) | cpl;
+		break;
+	case VCPU_SREG_TR:
+		if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
+			goto exception;
+		break;
+	case VCPU_SREG_LDTR:
+		if (seg_desc.s || seg_desc.type != 2)
+			goto exception;
+		break;
+	default: /*  DS, ES, FS, or GS */
+		/*
+		 * segment is not a data or readable code segment or
+		 * ((segment is a data or nonconforming code segment)
+		 * and (both RPL and CPL > DPL))
+		 */
+		if ((seg_desc.type & 0xa) == 0x8 ||
+		    (((seg_desc.type & 0xc) != 0xc) &&
+		     (rpl > dpl && cpl > dpl)))
+			goto exception;
+		break;
+	}
+
+	if (seg_desc.s) {
+		/* mark segment as accessed */
+		seg_desc.type |= 1;
+		ret = write_segment_descriptor(ctxt, ops, selector, &seg_desc);
+		if (ret != X86EMUL_CONTINUE)
+			return ret;
+	}
+load:
+	ops->set_segment_selector(selector, seg, ctxt->vcpu);
+	ops->set_cached_descriptor(&seg_desc, seg, ctxt->vcpu);
+	return X86EMUL_CONTINUE;
+exception:
+	kvm_queue_exception_e(ctxt->vcpu, err_vec, err_code);
+	return X86EMUL_PROPAGATE_FAULT;
+}
+
 static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 {
 	struct decode_cache *c = &ctxt->decode;
@@ -1196,13 +1507,56 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt,
 	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
 						 c->regs[VCPU_REGS_RSP]),
 				dest, len, ctxt->vcpu);
-	if (rc != 0)
+	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
 	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
 	return rc;
 }
 
+static int emulate_popf(struct x86_emulate_ctxt *ctxt,
+		       struct x86_emulate_ops *ops,
+		       void *dest, int len)
+{
+	int rc;
+	unsigned long val, change_mask;
+	int iopl = (ctxt->eflags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+	int cpl = ops->cpl(ctxt->vcpu);
+
+	rc = emulate_pop(ctxt, ops, &val, len);
+	if (rc != X86EMUL_CONTINUE)
+		return rc;
+
+	change_mask = EFLG_CF | EFLG_PF | EFLG_AF | EFLG_ZF | EFLG_SF | EFLG_OF
+		| EFLG_TF | EFLG_DF | EFLG_NT | EFLG_RF | EFLG_AC | EFLG_ID;
+
+	switch(ctxt->mode) {
+	case X86EMUL_MODE_PROT64:
+	case X86EMUL_MODE_PROT32:
+	case X86EMUL_MODE_PROT16:
+		if (cpl == 0)
+			change_mask |= EFLG_IOPL;
+		if (cpl <= iopl)
+			change_mask |= EFLG_IF;
+		break;
+	case X86EMUL_MODE_VM86:
+		if (iopl < 3) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return X86EMUL_PROPAGATE_FAULT;
+		}
+		change_mask |= EFLG_IF;
+		break;
+	default: /* real mode */
+		change_mask |= (EFLG_IOPL | EFLG_IF);
+		break;
+	}
+
+	*(unsigned long *)dest =
+		(ctxt->eflags & ~change_mask) | (val & change_mask);
+
+	return rc;
+}
+
 static void emulate_push_sreg(struct x86_emulate_ctxt *ctxt, int seg)
 {
 	struct decode_cache *c = &ctxt->decode;
@@ -1222,10 +1576,10 @@ static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
 	int rc;
 
 	rc = emulate_pop(ctxt, ops, &selector, c->op_bytes);
-	if (rc != 0)
+	if (rc != X86EMUL_CONTINUE)
 		return rc;
 
-	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)selector, 1, seg);
+	rc = load_segment_descriptor(ctxt, ops, (u16)selector, seg);
 	return rc;
 }
 
@@ -1248,7 +1602,7 @@ static int emulate_popa(struct x86_emulate_ctxt *ctxt,
 			struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
+	int rc = X86EMUL_CONTINUE;
 	int reg = VCPU_REGS_RDI;
 
 	while (reg >= VCPU_REGS_RAX) {
@@ -1259,7 +1613,7 @@ static int emulate_popa(struct x86_emulate_ctxt *ctxt,
 		}
 
 		rc = emulate_pop(ctxt, ops, &c->regs[reg], c->op_bytes);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			break;
 		--reg;
 	}
@@ -1270,12 +1624,8 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 				struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	int rc;
 
-	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
-	if (rc != 0)
-		return rc;
-	return 0;
+	return emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
 }
 
 static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
@@ -1311,7 +1661,6 @@ static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
 			       struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
 
 	switch (c->modrm_reg) {
 	case 0 ... 1:	/* test */
@@ -1324,11 +1673,9 @@ static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
 		emulate_1op("neg", c->dst, ctxt->eflags);
 		break;
 	default:
-		DPRINTF("Cannot emulate %02x\n", c->b);
-		rc = X86EMUL_UNHANDLEABLE;
-		break;
+		return 0;
 	}
-	return rc;
+	return 1;
 }
 
 static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
@@ -1358,20 +1705,14 @@ static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
 		emulate_push(ctxt);
 		break;
 	}
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops,
-			       unsigned long memop)
+			       struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	u64 old, new;
-	int rc;
-
-	rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
-	if (rc != 0)
-		return rc;
+	u64 old = c->dst.orig_val;
 
 	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
 	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
@@ -1379,17 +1720,13 @@ static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
 		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
 		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
 		ctxt->eflags &= ~EFLG_ZF;
-
 	} else {
-		new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+		c->dst.val = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
 		       (u32) c->regs[VCPU_REGS_RBX];
 
-		rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
-		if (rc != 0)
-			return rc;
 		ctxt->eflags |= EFLG_ZF;
 	}
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
@@ -1400,14 +1737,14 @@ static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
 	unsigned long cs;
 
 	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
-	if (rc)
+	if (rc != X86EMUL_CONTINUE)
 		return rc;
 	if (c->op_bytes == 4)
 		c->eip = (u32)c->eip;
 	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
-	if (rc)
+	if (rc != X86EMUL_CONTINUE)
 		return rc;
-	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
+	rc = load_segment_descriptor(ctxt, ops, (u16)cs, VCPU_SREG_CS);
 	return rc;
 }
 
@@ -1451,7 +1788,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
 					&c->dst.val,
 					c->dst.bytes,
 					ctxt->vcpu);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			return rc;
 		break;
 	case OP_NONE:
@@ -1460,7 +1797,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
 	default:
 		break;
 	}
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
@@ -1514,9 +1851,11 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
 	u64 msr_data;
 
 	/* syscall is not available in real mode */
-	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
-		return -1;
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+	    ctxt->mode == X86EMUL_MODE_VM86) {
+		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
 
 	setup_syscalls_segments(ctxt, &cs, &ss);
 
@@ -1553,7 +1892,7 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
 		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
 	}
 
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 static int
@@ -1563,22 +1902,19 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	struct kvm_segment cs, ss;
 	u64 msr_data;
 
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL ||
-		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+	/* inject #GP if in real mode */
+	if (ctxt->mode == X86EMUL_MODE_REAL) {
 		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
+		return X86EMUL_PROPAGATE_FAULT;
 	}
 
 	/* XXX sysenter/sysexit have not been tested in 64bit mode.
 	* Therefore, we inject an #UD.
 	*/
-	if (ctxt->mode == X86EMUL_MODE_PROT64)
-		return -1;
+	if (ctxt->mode == X86EMUL_MODE_PROT64) {
+		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
 
 	setup_syscalls_segments(ctxt, &cs, &ss);
 
@@ -1587,13 +1923,13 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	case X86EMUL_MODE_PROT32:
 		if ((msr_data & 0xfffc) == 0x0) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
+			return X86EMUL_PROPAGATE_FAULT;
 		}
 		break;
 	case X86EMUL_MODE_PROT64:
 		if (msr_data == 0x0) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
+			return X86EMUL_PROPAGATE_FAULT;
 		}
 		break;
 	}
@@ -1618,7 +1954,7 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
 	c->regs[VCPU_REGS_RSP] = msr_data;
 
-	return 0;
+	return X86EMUL_CONTINUE;
 }
 
 static int
@@ -1629,21 +1965,11 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
 	u64 msr_data;
 	int usermode;
 
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	/* sysexit must be called from CPL 0 */
-	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+	/* inject #GP if in real mode or Virtual 8086 mode */
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+	    ctxt->mode == X86EMUL_MODE_VM86) {
 		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
+		return X86EMUL_PROPAGATE_FAULT;
 	}
 
 	setup_syscalls_segments(ctxt, &cs, &ss);
@@ -1661,7 +1987,7 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
 		cs.selector = (u16)(msr_data + 16);
 		if ((msr_data & 0xfffc) == 0x0) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
+			return X86EMUL_PROPAGATE_FAULT;
 		}
 		ss.selector = (u16)(msr_data + 24);
 		break;
@@ -1669,7 +1995,7 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
 		cs.selector = (u16)(msr_data + 32);
 		if (msr_data == 0x0) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
+			return X86EMUL_PROPAGATE_FAULT;
 		}
 		ss.selector = cs.selector + 8;
 		cs.db = 0;
@@ -1685,19 +2011,468 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
 	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
 	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
 
-	return 0;
+	return X86EMUL_CONTINUE;
+}
+
+static bool emulator_bad_iopl(struct x86_emulate_ctxt *ctxt,
+			      struct x86_emulate_ops *ops)
+{
+	int iopl;
+	if (ctxt->mode == X86EMUL_MODE_REAL)
+		return false;
+	if (ctxt->mode == X86EMUL_MODE_VM86)
+		return true;
+	iopl = (ctxt->eflags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+	return ops->cpl(ctxt->vcpu) > iopl;
+}
+
+static bool emulator_io_port_access_allowed(struct x86_emulate_ctxt *ctxt,
+					    struct x86_emulate_ops *ops,
+					    u16 port, u16 len)
+{
+	struct kvm_segment tr_seg;
+	int r;
+	u16 io_bitmap_ptr;
+	u8 perm, bit_idx = port & 0x7;
+	unsigned mask = (1 << len) - 1;
+
+	kvm_get_segment(ctxt->vcpu, &tr_seg, VCPU_SREG_TR);
+	if (tr_seg.unusable)
+		return false;
+	if (tr_seg.limit < 103)
+		return false;
+	r = ops->read_std(tr_seg.base + 102, &io_bitmap_ptr, 2, ctxt->vcpu,
+			  NULL);
+	if (r != X86EMUL_CONTINUE)
+		return false;
+	if (io_bitmap_ptr + port/8 > tr_seg.limit)
+		return false;
+	r = ops->read_std(tr_seg.base + io_bitmap_ptr + port/8, &perm, 1,
+			  ctxt->vcpu, NULL);
+	if (r != X86EMUL_CONTINUE)
+		return false;
+	if ((perm >> bit_idx) & mask)
+		return false;
+	return true;
+}
+
+static bool emulator_io_permited(struct x86_emulate_ctxt *ctxt,
+				 struct x86_emulate_ops *ops,
+				 u16 port, u16 len)
+{
+	if (emulator_bad_iopl(ctxt, ops))
+		if (!emulator_io_port_access_allowed(ctxt, ops, port, len))
+			return false;
+	return true;
+}
+
+static u32 get_cached_descriptor_base(struct x86_emulate_ctxt *ctxt,
+				      struct x86_emulate_ops *ops,
+				      int seg)
+{
+	struct desc_struct desc;
+	if (ops->get_cached_descriptor(&desc, seg, ctxt->vcpu))
+		return get_desc_base(&desc);
+	else
+		return ~0;
+}
+
+static void save_state_to_tss16(struct x86_emulate_ctxt *ctxt,
+				struct x86_emulate_ops *ops,
+				struct tss_segment_16 *tss)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	tss->ip = c->eip;
+	tss->flag = ctxt->eflags;
+	tss->ax = c->regs[VCPU_REGS_RAX];
+	tss->cx = c->regs[VCPU_REGS_RCX];
+	tss->dx = c->regs[VCPU_REGS_RDX];
+	tss->bx = c->regs[VCPU_REGS_RBX];
+	tss->sp = c->regs[VCPU_REGS_RSP];
+	tss->bp = c->regs[VCPU_REGS_RBP];
+	tss->si = c->regs[VCPU_REGS_RSI];
+	tss->di = c->regs[VCPU_REGS_RDI];
+
+	tss->es = ops->get_segment_selector(VCPU_SREG_ES, ctxt->vcpu);
+	tss->cs = ops->get_segment_selector(VCPU_SREG_CS, ctxt->vcpu);
+	tss->ss = ops->get_segment_selector(VCPU_SREG_SS, ctxt->vcpu);
+	tss->ds = ops->get_segment_selector(VCPU_SREG_DS, ctxt->vcpu);
+	tss->ldt = ops->get_segment_selector(VCPU_SREG_LDTR, ctxt->vcpu);
+}
+
+static int load_state_from_tss16(struct x86_emulate_ctxt *ctxt,
+				 struct x86_emulate_ops *ops,
+				 struct tss_segment_16 *tss)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int ret;
+
+	c->eip = tss->ip;
+	ctxt->eflags = tss->flag | 2;
+	c->regs[VCPU_REGS_RAX] = tss->ax;
+	c->regs[VCPU_REGS_RCX] = tss->cx;
+	c->regs[VCPU_REGS_RDX] = tss->dx;
+	c->regs[VCPU_REGS_RBX] = tss->bx;
+	c->regs[VCPU_REGS_RSP] = tss->sp;
+	c->regs[VCPU_REGS_RBP] = tss->bp;
+	c->regs[VCPU_REGS_RSI] = tss->si;
+	c->regs[VCPU_REGS_RDI] = tss->di;
+
+	/*
+	 * SDM says that segment selectors are loaded before segment
+	 * descriptors
+	 */
+	ops->set_segment_selector(tss->ldt, VCPU_SREG_LDTR, ctxt->vcpu);
+	ops->set_segment_selector(tss->es, VCPU_SREG_ES, ctxt->vcpu);
+	ops->set_segment_selector(tss->cs, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_segment_selector(tss->ss, VCPU_SREG_SS, ctxt->vcpu);
+	ops->set_segment_selector(tss->ds, VCPU_SREG_DS, ctxt->vcpu);
+
+	/*
+	 * Now load segment descriptors. If fault happenes at this stage
+	 * it is handled in a context of new task
+	 */
+	ret = load_segment_descriptor(ctxt, ops, tss->ldt, VCPU_SREG_LDTR);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->es, VCPU_SREG_ES);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->cs, VCPU_SREG_CS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->ss, VCPU_SREG_SS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->ds, VCPU_SREG_DS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+
+	return X86EMUL_CONTINUE;
+}
+
+static int task_switch_16(struct x86_emulate_ctxt *ctxt,
+			  struct x86_emulate_ops *ops,
+			  u16 tss_selector, u16 old_tss_sel,
+			  ulong old_tss_base, struct desc_struct *new_desc)
+{
+	struct tss_segment_16 tss_seg;
+	int ret;
+	u32 err, new_tss_base = get_desc_base(new_desc);
+
+	ret = ops->read_std(old_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			    &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		return ret;
+	}
+
+	save_state_to_tss16(ctxt, ops, &tss_seg);
+
+	ret = ops->write_std(old_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			     &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		return ret;
+	}
+
+	ret = ops->read_std(new_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			    &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+		return ret;
+	}
+
+	if (old_tss_sel != 0xffff) {
+		tss_seg.prev_task_link = old_tss_sel;
+
+		ret = ops->write_std(new_tss_base,
+				     &tss_seg.prev_task_link,
+				     sizeof tss_seg.prev_task_link,
+				     ctxt->vcpu, &err);
+		if (ret == X86EMUL_PROPAGATE_FAULT) {
+			/* FIXME: need to provide precise fault address */
+			kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+			return ret;
+		}
+	}
+
+	return load_state_from_tss16(ctxt, ops, &tss_seg);
+}
+
+static void save_state_to_tss32(struct x86_emulate_ctxt *ctxt,
+				struct x86_emulate_ops *ops,
+				struct tss_segment_32 *tss)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	tss->cr3 = ops->get_cr(3, ctxt->vcpu);
+	tss->eip = c->eip;
+	tss->eflags = ctxt->eflags;
+	tss->eax = c->regs[VCPU_REGS_RAX];
+	tss->ecx = c->regs[VCPU_REGS_RCX];
+	tss->edx = c->regs[VCPU_REGS_RDX];
+	tss->ebx = c->regs[VCPU_REGS_RBX];
+	tss->esp = c->regs[VCPU_REGS_RSP];
+	tss->ebp = c->regs[VCPU_REGS_RBP];
+	tss->esi = c->regs[VCPU_REGS_RSI];
+	tss->edi = c->regs[VCPU_REGS_RDI];
+
+	tss->es = ops->get_segment_selector(VCPU_SREG_ES, ctxt->vcpu);
+	tss->cs = ops->get_segment_selector(VCPU_SREG_CS, ctxt->vcpu);
+	tss->ss = ops->get_segment_selector(VCPU_SREG_SS, ctxt->vcpu);
+	tss->ds = ops->get_segment_selector(VCPU_SREG_DS, ctxt->vcpu);
+	tss->fs = ops->get_segment_selector(VCPU_SREG_FS, ctxt->vcpu);
+	tss->gs = ops->get_segment_selector(VCPU_SREG_GS, ctxt->vcpu);
+	tss->ldt_selector = ops->get_segment_selector(VCPU_SREG_LDTR, ctxt->vcpu);
+}
+
+static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt,
+				 struct x86_emulate_ops *ops,
+				 struct tss_segment_32 *tss)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int ret;
+
+	ops->set_cr(3, tss->cr3, ctxt->vcpu);
+	c->eip = tss->eip;
+	ctxt->eflags = tss->eflags | 2;
+	c->regs[VCPU_REGS_RAX] = tss->eax;
+	c->regs[VCPU_REGS_RCX] = tss->ecx;
+	c->regs[VCPU_REGS_RDX] = tss->edx;
+	c->regs[VCPU_REGS_RBX] = tss->ebx;
+	c->regs[VCPU_REGS_RSP] = tss->esp;
+	c->regs[VCPU_REGS_RBP] = tss->ebp;
+	c->regs[VCPU_REGS_RSI] = tss->esi;
+	c->regs[VCPU_REGS_RDI] = tss->edi;
+
+	/*
+	 * SDM says that segment selectors are loaded before segment
+	 * descriptors
+	 */
+	ops->set_segment_selector(tss->ldt_selector, VCPU_SREG_LDTR, ctxt->vcpu);
+	ops->set_segment_selector(tss->es, VCPU_SREG_ES, ctxt->vcpu);
+	ops->set_segment_selector(tss->cs, VCPU_SREG_CS, ctxt->vcpu);
+	ops->set_segment_selector(tss->ss, VCPU_SREG_SS, ctxt->vcpu);
+	ops->set_segment_selector(tss->ds, VCPU_SREG_DS, ctxt->vcpu);
+	ops->set_segment_selector(tss->fs, VCPU_SREG_FS, ctxt->vcpu);
+	ops->set_segment_selector(tss->gs, VCPU_SREG_GS, ctxt->vcpu);
+
+	/*
+	 * Now load segment descriptors. If fault happenes at this stage
+	 * it is handled in a context of new task
+	 */
+	ret = load_segment_descriptor(ctxt, ops, tss->ldt_selector, VCPU_SREG_LDTR);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->es, VCPU_SREG_ES);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->cs, VCPU_SREG_CS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->ss, VCPU_SREG_SS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->ds, VCPU_SREG_DS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->fs, VCPU_SREG_FS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = load_segment_descriptor(ctxt, ops, tss->gs, VCPU_SREG_GS);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+
+	return X86EMUL_CONTINUE;
+}
+
+static int task_switch_32(struct x86_emulate_ctxt *ctxt,
+			  struct x86_emulate_ops *ops,
+			  u16 tss_selector, u16 old_tss_sel,
+			  ulong old_tss_base, struct desc_struct *new_desc)
+{
+	struct tss_segment_32 tss_seg;
+	int ret;
+	u32 err, new_tss_base = get_desc_base(new_desc);
+
+	ret = ops->read_std(old_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			    &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		return ret;
+	}
+
+	save_state_to_tss32(ctxt, ops, &tss_seg);
+
+	ret = ops->write_std(old_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			     &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, old_tss_base, err);
+		return ret;
+	}
+
+	ret = ops->read_std(new_tss_base, &tss_seg, sizeof tss_seg, ctxt->vcpu,
+			    &err);
+	if (ret == X86EMUL_PROPAGATE_FAULT) {
+		/* FIXME: need to provide precise fault address */
+		kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+		return ret;
+	}
+
+	if (old_tss_sel != 0xffff) {
+		tss_seg.prev_task_link = old_tss_sel;
+
+		ret = ops->write_std(new_tss_base,
+				     &tss_seg.prev_task_link,
+				     sizeof tss_seg.prev_task_link,
+				     ctxt->vcpu, &err);
+		if (ret == X86EMUL_PROPAGATE_FAULT) {
+			/* FIXME: need to provide precise fault address */
+			kvm_inject_page_fault(ctxt->vcpu, new_tss_base, err);
+			return ret;
+		}
+	}
+
+	return load_state_from_tss32(ctxt, ops, &tss_seg);
+}
+
+static int emulator_do_task_switch(struct x86_emulate_ctxt *ctxt,
+				   struct x86_emulate_ops *ops,
+				   u16 tss_selector, int reason,
+				   bool has_error_code, u32 error_code)
+{
+	struct desc_struct curr_tss_desc, next_tss_desc;
+	int ret;
+	u16 old_tss_sel = ops->get_segment_selector(VCPU_SREG_TR, ctxt->vcpu);
+	ulong old_tss_base =
+		get_cached_descriptor_base(ctxt, ops, VCPU_SREG_TR);
+	u32 desc_limit;
+
+	/* FIXME: old_tss_base == ~0 ? */
+
+	ret = read_segment_descriptor(ctxt, ops, tss_selector, &next_tss_desc);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+	ret = read_segment_descriptor(ctxt, ops, old_tss_sel, &curr_tss_desc);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+
+	/* FIXME: check that next_tss_desc is tss */
+
+	if (reason != TASK_SWITCH_IRET) {
+		if ((tss_selector & 3) > next_tss_desc.dpl ||
+		    ops->cpl(ctxt->vcpu) > next_tss_desc.dpl) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return X86EMUL_PROPAGATE_FAULT;
+		}
+	}
+
+	desc_limit = desc_limit_scaled(&next_tss_desc);
+	if (!next_tss_desc.p ||
+	    ((desc_limit < 0x67 && (next_tss_desc.type & 8)) ||
+	     desc_limit < 0x2b)) {
+		kvm_queue_exception_e(ctxt->vcpu, TS_VECTOR,
+				      tss_selector & 0xfffc);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
+
+	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
+		curr_tss_desc.type &= ~(1 << 1); /* clear busy flag */
+		write_segment_descriptor(ctxt, ops, old_tss_sel,
+					 &curr_tss_desc);
+	}
+
+	if (reason == TASK_SWITCH_IRET)
+		ctxt->eflags = ctxt->eflags & ~X86_EFLAGS_NT;
+
+	/* set back link to prev task only if NT bit is set in eflags
+	   note that old_tss_sel is not used afetr this point */
+	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
+		old_tss_sel = 0xffff;
+
+	if (next_tss_desc.type & 8)
+		ret = task_switch_32(ctxt, ops, tss_selector, old_tss_sel,
+				     old_tss_base, &next_tss_desc);
+	else
+		ret = task_switch_16(ctxt, ops, tss_selector, old_tss_sel,
+				     old_tss_base, &next_tss_desc);
+	if (ret != X86EMUL_CONTINUE)
+		return ret;
+
+	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE)
+		ctxt->eflags = ctxt->eflags | X86_EFLAGS_NT;
+
+	if (reason != TASK_SWITCH_IRET) {
+		next_tss_desc.type |= (1 << 1); /* set busy flag */
+		write_segment_descriptor(ctxt, ops, tss_selector,
+					 &next_tss_desc);
+	}
+
+	ops->set_cr(0,  ops->get_cr(0, ctxt->vcpu) | X86_CR0_TS, ctxt->vcpu);
+	ops->set_cached_descriptor(&next_tss_desc, VCPU_SREG_TR, ctxt->vcpu);
+	ops->set_segment_selector(tss_selector, VCPU_SREG_TR, ctxt->vcpu);
+
+	if (has_error_code) {
+		struct decode_cache *c = &ctxt->decode;
+
+		c->op_bytes = c->ad_bytes = (next_tss_desc.type & 8) ? 4 : 2;
+		c->lock_prefix = 0;
+		c->src.val = (unsigned long) error_code;
+		emulate_push(ctxt);
+	}
+
+	return ret;
+}
+
+int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
+			 struct x86_emulate_ops *ops,
+			 u16 tss_selector, int reason,
+			 bool has_error_code, u32 error_code)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+
+	memset(c, 0, sizeof(struct decode_cache));
+	c->eip = ctxt->eip;
+	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+	c->dst.type = OP_NONE;
+
+	rc = emulator_do_task_switch(ctxt, ops, tss_selector, reason,
+				     has_error_code, error_code);
+
+	if (rc == X86EMUL_CONTINUE) {
+		memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
+		kvm_rip_write(ctxt->vcpu, c->eip);
+		rc = writeback(ctxt, ops);
+	}
+
+	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
+}
+
+static void string_addr_inc(struct x86_emulate_ctxt *ctxt, unsigned long base,
+			    int reg, struct operand *op)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int df = (ctxt->eflags & EFLG_DF) ? -1 : 1;
+
+	register_address_increment(c, &c->regs[reg], df * op->bytes);
+	op->ptr = (unsigned long *)register_address(c,  base, c->regs[reg]);
 }
 
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
-	unsigned long memop = 0;
 	u64 msr_data;
-	unsigned long saved_eip = 0;
 	struct decode_cache *c = &ctxt->decode;
-	unsigned int port;
-	int io_dir_in;
-	int rc = 0;
+	int rc = X86EMUL_CONTINUE;
+	int saved_dst_type = c->dst.type;
 
 	ctxt->interruptibility = 0;
 
@@ -1707,14 +2482,30 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	 */
 
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-	saved_eip = c->eip;
 
-	if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
-		memop = c->modrm_ea;
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
+		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		goto done;
+	}
+
+	/* LOCK prefix is allowed only with some instructions */
+	if (c->lock_prefix && (!(c->d & Lock) || c->dst.type != OP_MEM)) {
+		kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+		goto done;
+	}
+
+	/* Privileged instruction can be executed only in CPL=0 */
+	if ((c->d & Priv) && ops->cpl(ctxt->vcpu)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		goto done;
+	}
 
 	if (c->rep_prefix && (c->d & String)) {
+		ctxt->restart = true;
 		/* All REP prefixes have the same first termination condition */
-		if (c->regs[VCPU_REGS_RCX] == 0) {
+		if (address_mask(c, c->regs[VCPU_REGS_RCX]) == 0) {
+		string_done:
+			ctxt->restart = false;
 			kvm_rip_write(ctxt->vcpu, c->eip);
 			goto done;
 		}
@@ -1726,53 +2517,45 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 		 * 	- if REPNE/REPNZ and ZF = 1 then done
 		 */
 		if ((c->b == 0xa6) || (c->b == 0xa7) ||
-				(c->b == 0xae) || (c->b == 0xaf)) {
+		    (c->b == 0xae) || (c->b == 0xaf)) {
 			if ((c->rep_prefix == REPE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == 0)) {
-					kvm_rip_write(ctxt->vcpu, c->eip);
-					goto done;
-			}
+			    ((ctxt->eflags & EFLG_ZF) == 0))
+				goto string_done;
 			if ((c->rep_prefix == REPNE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
-				kvm_rip_write(ctxt->vcpu, c->eip);
-				goto done;
-			}
+			    ((ctxt->eflags & EFLG_ZF) == EFLG_ZF))
+				goto string_done;
 		}
-		c->regs[VCPU_REGS_RCX]--;
-		c->eip = kvm_rip_read(ctxt->vcpu);
+		c->eip = ctxt->eip;
 	}
 
 	if (c->src.type == OP_MEM) {
-		c->src.ptr = (unsigned long *)memop;
-		c->src.val = 0;
 		rc = ops->read_emulated((unsigned long)c->src.ptr,
 					&c->src.val,
 					c->src.bytes,
 					ctxt->vcpu);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		c->src.orig_val = c->src.val;
 	}
 
+	if (c->src2.type == OP_MEM) {
+		rc = ops->read_emulated((unsigned long)c->src2.ptr,
+					&c->src2.val,
+					c->src2.bytes,
+					ctxt->vcpu);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
+	}
+
 	if ((c->d & DstMask) == ImplicitOps)
 		goto special_insn;
 
 
-	if (c->dst.type == OP_MEM) {
-		c->dst.ptr = (unsigned long *)memop;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.val = 0;
-		if (c->d & BitOp) {
-			unsigned long mask = ~(c->dst.bytes * 8 - 1);
-
-			c->dst.ptr = (void *)c->dst.ptr +
-						   (c->src.val & mask) / 8;
-		}
-		if (!(c->d & Mov) &&
-				   /* optimisation - avoid slow emulated read */
-		    ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-					   &c->dst.val,
-					  c->dst.bytes, ctxt->vcpu)) != 0))
+	if ((c->dst.type == OP_MEM) && !(c->d & Mov)) {
+		/* optimisation - avoid slow emulated read if Mov */
+		rc = ops->read_emulated((unsigned long)c->dst.ptr, &c->dst.val,
+					c->dst.bytes, ctxt->vcpu);
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 	}
 	c->dst.orig_val = c->dst.val;
@@ -1792,7 +2575,7 @@ special_insn:
 		break;
 	case 0x07:		/* pop es */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_ES);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x08 ... 0x0d:
@@ -1811,7 +2594,7 @@ special_insn:
 		break;
 	case 0x17:		/* pop ss */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_SS);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x18 ... 0x1d:
@@ -1823,7 +2606,7 @@ special_insn:
 		break;
 	case 0x1f:		/* pop ds */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_DS);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x20 ... 0x25:
@@ -1854,7 +2637,7 @@ special_insn:
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
 		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x60:	/* pusha */
@@ -1862,7 +2645,7 @@ special_insn:
 		break;
 	case 0x61:	/* popa */
 		rc = emulate_popa(ctxt, ops);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x63:		/* movsxd */
@@ -1876,37 +2659,29 @@ special_insn:
 		break;
 	case 0x6c:		/* insb */
 	case 0x6d:		/* insw/insd */
-		 if (kvm_emulate_pio_string(ctxt->vcpu,
-				1,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-				register_address(c, es_base(ctxt),
-						 c->regs[VCPU_REGS_RDI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
+		c->dst.bytes = min(c->dst.bytes, 4u);
+		if (!emulator_io_permited(ctxt, ops, c->regs[VCPU_REGS_RDX],
+					  c->dst.bytes)) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			goto done;
 		}
-		return 0;
+		if (!pio_in_emulated(ctxt, ops, c->dst.bytes,
+				     c->regs[VCPU_REGS_RDX], &c->dst.val))
+			goto done; /* IO is needed, skip writeback */
+		break;
 	case 0x6e:		/* outsb */
 	case 0x6f:		/* outsw/outsd */
-		if (kvm_emulate_pio_string(ctxt->vcpu,
-				0,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-					 register_address(c,
-					  seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
+		c->src.bytes = min(c->src.bytes, 4u);
+		if (!emulator_io_permited(ctxt, ops, c->regs[VCPU_REGS_RDX],
+					  c->src.bytes)) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			goto done;
 		}
-		return 0;
+		ops->pio_out_emulated(c->src.bytes, c->regs[VCPU_REGS_RDX],
+				      &c->src.val, 1, ctxt->vcpu);
+
+		c->dst.type = OP_NONE; /* nothing to writeback */
+		break;
 	case 0x70 ... 0x7f: /* jcc (short) */
 		if (test_cc(c->b, ctxt->eflags))
 			jmp_rel(c, c->src.val);
@@ -1963,12 +2738,11 @@ special_insn:
 	case 0x8c: { /* mov r/m, sreg */
 		struct kvm_segment segreg;
 
-		if (c->modrm_reg <= 5)
+		if (c->modrm_reg <= VCPU_SREG_GS)
 			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
 		else {
-			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
-			       c->modrm);
-			goto cannot_emulate;
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
 		}
 		c->dst.val = segreg.selector;
 		break;
@@ -1978,32 +2752,26 @@ special_insn:
 		break;
 	case 0x8e: { /* mov seg, r/m16 */
 		uint16_t sel;
-		int type_bits;
-		int err;
 
 		sel = c->src.val;
-		if (c->modrm_reg == VCPU_SREG_SS)
-			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
 
-		if (c->modrm_reg <= 5) {
-			type_bits = (c->modrm_reg == 1) ? 9 : 1;
-			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
-							  type_bits, c->modrm_reg);
-		} else {
-			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
-					c->modrm);
-			goto cannot_emulate;
+		if (c->modrm_reg == VCPU_SREG_CS ||
+		    c->modrm_reg > VCPU_SREG_GS) {
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
 		}
 
-		if (err < 0)
-			goto cannot_emulate;
+		if (c->modrm_reg == VCPU_SREG_SS)
+			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_MOV_SS);
+
+		rc = load_segment_descriptor(ctxt, ops, sel, c->modrm_reg);
 
 		c->dst.type = OP_NONE;  /* Disable writeback. */
 		break;
 	}
 	case 0x8f:		/* pop (sole member of Grp1a) */
 		rc = emulate_grp1a(ctxt, ops);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0x90: /* nop / xchg r8,rax */
@@ -2025,7 +2793,10 @@ special_insn:
 		c->dst.type = OP_REG;
 		c->dst.ptr = (unsigned long *) &ctxt->eflags;
 		c->dst.bytes = c->op_bytes;
-		goto pop_instruction;
+		rc = emulate_popf(ctxt, ops, &c->dst.val, c->op_bytes);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
+		break;
 	case 0xa0 ... 0xa1:	/* mov */
 		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
 		c->dst.val = c->src.val;
@@ -2034,85 +2805,16 @@ special_insn:
 		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
 		break;
 	case 0xa4 ... 0xa5:	/* movs */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated(register_address(c,
-					   seg_override_base(ctxt, c),
-					c->regs[VCPU_REGS_RSI]),
-					&c->dst.val,
-					c->dst.bytes, ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
+		goto mov;
 	case 0xa6 ... 0xa7:	/* cmps */
-		c->src.type = OP_NONE; /* Disable writeback. */
-		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->src.ptr = (unsigned long *)register_address(c,
-				       seg_override_base(ctxt, c),
-						   c->regs[VCPU_REGS_RSI]);
-		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
-						&c->src.val,
-						c->src.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
 		c->dst.type = OP_NONE; /* Disable writeback. */
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-						&c->dst.val,
-						c->dst.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
 		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
-
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->src.bytes
-								  : c->src.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-								  : c->dst.bytes);
-
-		break;
+		goto cmp;
 	case 0xaa ... 0xab:	/* stos */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
 		c->dst.val = c->regs[VCPU_REGS_RAX];
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
 		break;
 	case 0xac ... 0xad:	/* lods */
-		c->dst.type = OP_REG;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		if ((rc = ops->read_emulated(register_address(c,
-						 seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-						 &c->dst.val,
-						 c->dst.bytes,
-						 ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
+		goto mov;
 	case 0xae ... 0xaf:	/* scas */
 		DPRINTF("Urk! I don't handle SCAS.\n");
 		goto cannot_emulate;
@@ -2132,7 +2834,7 @@ special_insn:
 		break;
 	case 0xcb:		/* ret far */
 		rc = emulate_ret_far(ctxt, ops);
-		if (rc)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0xd0 ... 0xd1:	/* Grp2 */
@@ -2145,14 +2847,10 @@ special_insn:
 		break;
 	case 0xe4: 	/* inb */
 	case 0xe5: 	/* in */
-		port = c->src.val;
-		io_dir_in = 1;
-		goto do_io;
+		goto do_io_in;
 	case 0xe6: /* outb */
 	case 0xe7: /* out */
-		port = c->src.val;
-		io_dir_in = 0;
-		goto do_io;
+		goto do_io_out;
 	case 0xe8: /* call (near) */ {
 		long int rel = c->src.val;
 		c->src.val = (unsigned long) c->eip;
@@ -2163,11 +2861,10 @@ special_insn:
 	case 0xe9: /* jmp rel */
 		goto jmp;
 	case 0xea: /* jmp far */
-		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
-					VCPU_SREG_CS) < 0) {
-			DPRINTF("jmp far: Failed to load CS descriptor\n");
-			goto cannot_emulate;
-		}
+	jump_far:
+		if (load_segment_descriptor(ctxt, ops, c->src2.val,
+					    VCPU_SREG_CS))
+			goto done;
 
 		c->eip = c->src.val;
 		break;
@@ -2178,19 +2875,29 @@ special_insn:
 		break;
 	case 0xec: /* in al,dx */
 	case 0xed: /* in (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 1;
-		goto do_io;
+		c->src.val = c->regs[VCPU_REGS_RDX];
+	do_io_in:
+		c->dst.bytes = min(c->dst.bytes, 4u);
+		if (!emulator_io_permited(ctxt, ops, c->src.val, c->dst.bytes)) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			goto done;
+		}
+		if (!pio_in_emulated(ctxt, ops, c->dst.bytes, c->src.val,
+				     &c->dst.val))
+			goto done; /* IO is needed */
+		break;
 	case 0xee: /* out al,dx */
 	case 0xef: /* out (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 0;
-	do_io:	if (kvm_emulate_pio(ctxt->vcpu, io_dir_in,
-				   (c->d & ByteOp) ? 1 : c->op_bytes,
-				   port) != 0) {
-			c->eip = saved_eip;
-			goto cannot_emulate;
+		c->src.val = c->regs[VCPU_REGS_RDX];
+	do_io_out:
+		c->dst.bytes = min(c->dst.bytes, 4u);
+		if (!emulator_io_permited(ctxt, ops, c->src.val, c->dst.bytes)) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			goto done;
 		}
+		ops->pio_out_emulated(c->dst.bytes, c->src.val, &c->dst.val, 1,
+				      ctxt->vcpu);
+		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
 	case 0xf4:              /* hlt */
 		ctxt->vcpu->arch.halt_request = 1;
@@ -2201,22 +2908,29 @@ special_insn:
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
 	case 0xf6 ... 0xf7:	/* Grp3 */
-		rc = emulate_grp3(ctxt, ops);
-		if (rc != 0)
-			goto done;
+		if (!emulate_grp3(ctxt, ops))
+			goto cannot_emulate;
 		break;
 	case 0xf8: /* clc */
 		ctxt->eflags &= ~EFLG_CF;
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
 	case 0xfa: /* cli */
-		ctxt->eflags &= ~X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
+		if (emulator_bad_iopl(ctxt, ops))
+			kvm_inject_gp(ctxt->vcpu, 0);
+		else {
+			ctxt->eflags &= ~X86_EFLAGS_IF;
+			c->dst.type = OP_NONE;	/* Disable writeback. */
+		}
 		break;
 	case 0xfb: /* sti */
-		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
-		ctxt->eflags |= X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
+		if (emulator_bad_iopl(ctxt, ops))
+			kvm_inject_gp(ctxt->vcpu, 0);
+		else {
+			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_STI);
+			ctxt->eflags |= X86_EFLAGS_IF;
+			c->dst.type = OP_NONE;	/* Disable writeback. */
+		}
 		break;
 	case 0xfc: /* cld */
 		ctxt->eflags &= ~EFLG_DF;
@@ -2226,28 +2940,55 @@ special_insn:
 		ctxt->eflags |= EFLG_DF;
 		c->dst.type = OP_NONE;	/* Disable writeback. */
 		break;
-	case 0xfe ... 0xff:	/* Grp4/Grp5 */
+	case 0xfe: /* Grp4 */
+	grp45:
 		rc = emulate_grp45(ctxt, ops);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
+	case 0xff: /* Grp5 */
+		if (c->modrm_reg == 5)
+			goto jump_far;
+		goto grp45;
 	}
 
 writeback:
 	rc = writeback(ctxt, ops);
-	if (rc != 0)
+	if (rc != X86EMUL_CONTINUE)
 		goto done;
 
+	/*
+	 * restore dst type in case the decoding will be reused
+	 * (happens for string instruction )
+	 */
+	c->dst.type = saved_dst_type;
+
+	if ((c->d & SrcMask) == SrcSI)
+		string_addr_inc(ctxt, seg_override_base(ctxt, c), VCPU_REGS_RSI,
+				&c->src);
+
+	if ((c->d & DstMask) == DstDI)
+		string_addr_inc(ctxt, es_base(ctxt), VCPU_REGS_RDI, &c->dst);
+
+	if (c->rep_prefix && (c->d & String)) {
+		struct read_cache *rc = &ctxt->decode.io_read;
+		register_address_increment(c, &c->regs[VCPU_REGS_RCX], -1);
+		/*
+		 * Re-enter guest when pio read ahead buffer is empty or,
+		 * if it is not used, after each 1024 iteration.
+		 */
+		if ((rc->end == 0 && !(c->regs[VCPU_REGS_RCX] & 0x3ff)) ||
+		    (rc->end != 0 && rc->end == rc->pos))
+			ctxt->restart = false;
+	}
+
 	/* Commit shadow register state. */
 	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
 	kvm_rip_write(ctxt->vcpu, c->eip);
+	ops->set_rflags(ctxt->vcpu, ctxt->eflags);
 
 done:
-	if (rc == X86EMUL_UNHANDLEABLE) {
-		c->eip = saved_eip;
-		return -1;
-	}
-	return 0;
+	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 
 twobyte_insn:
 	switch (c->b) {
@@ -2261,18 +3002,18 @@ twobyte_insn:
 				goto cannot_emulate;
 
 			rc = kvm_fix_hypercall(ctxt->vcpu);
-			if (rc)
+			if (rc != X86EMUL_CONTINUE)
 				goto done;
 
 			/* Let the processor re-execute the fixed hypercall */
-			c->eip = kvm_rip_read(ctxt->vcpu);
+			c->eip = ctxt->eip;
 			/* Disable writeback. */
 			c->dst.type = OP_NONE;
 			break;
 		case 2: /* lgdt */
 			rc = read_descriptor(ctxt, ops, c->src.ptr,
 					     &size, &address, c->op_bytes);
-			if (rc)
+			if (rc != X86EMUL_CONTINUE)
 				goto done;
 			realmode_lgdt(ctxt->vcpu, size, address);
 			/* Disable writeback. */
@@ -2283,7 +3024,7 @@ twobyte_insn:
 				switch (c->modrm_rm) {
 				case 1:
 					rc = kvm_fix_hypercall(ctxt->vcpu);
-					if (rc)
+					if (rc != X86EMUL_CONTINUE)
 						goto done;
 					break;
 				default:
@@ -2293,7 +3034,7 @@ twobyte_insn:
 				rc = read_descriptor(ctxt, ops, c->src.ptr,
 						     &size, &address,
 						     c->op_bytes);
-				if (rc)
+				if (rc != X86EMUL_CONTINUE)
 					goto done;
 				realmode_lidt(ctxt->vcpu, size, address);
 			}
@@ -2302,15 +3043,18 @@ twobyte_insn:
 			break;
 		case 4: /* smsw */
 			c->dst.bytes = 2;
-			c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
+			c->dst.val = ops->get_cr(0, ctxt->vcpu);
 			break;
 		case 6: /* lmsw */
-			realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
-				      &ctxt->eflags);
+			ops->set_cr(0, (ops->get_cr(0, ctxt->vcpu) & ~0x0ful) |
+				    (c->src.val & 0x0f), ctxt->vcpu);
 			c->dst.type = OP_NONE;
 			break;
+		case 5: /* not defined */
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
 		case 7: /* invlpg*/
-			emulate_invlpg(ctxt->vcpu, memop);
+			emulate_invlpg(ctxt->vcpu, c->modrm_ea);
 			/* Disable writeback. */
 			c->dst.type = OP_NONE;
 			break;
@@ -2319,8 +3063,9 @@ twobyte_insn:
 		}
 		break;
 	case 0x05: 		/* syscall */
-		if (emulate_syscall(ctxt) == -1)
-			goto cannot_emulate;
+		rc = emulate_syscall(ctxt);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
 		else
 			goto writeback;
 		break;
@@ -2335,54 +3080,54 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0x20: /* mov cr, reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		c->regs[c->modrm_rm] =
-				realmode_get_cr(ctxt->vcpu, c->modrm_reg);
+		switch (c->modrm_reg) {
+		case 1:
+		case 5 ... 7:
+		case 9 ... 15:
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
+		}
+		c->regs[c->modrm_rm] = ops->get_cr(c->modrm_reg, ctxt->vcpu);
 		c->dst.type = OP_NONE;	/* no writeback */
 		break;
 	case 0x21: /* mov from dr to reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
+		if ((ops->get_cr(4, ctxt->vcpu) & X86_CR4_DE) &&
+		    (c->modrm_reg == 4 || c->modrm_reg == 5)) {
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
+		}
+		emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
 		c->dst.type = OP_NONE;	/* no writeback */
 		break;
 	case 0x22: /* mov reg, cr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		realmode_set_cr(ctxt->vcpu,
-				c->modrm_reg, c->modrm_val, &ctxt->eflags);
+		ops->set_cr(c->modrm_reg, c->modrm_val, ctxt->vcpu);
 		c->dst.type = OP_NONE;
 		break;
 	case 0x23: /* mov from reg to dr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_set_dr(ctxt, c->modrm_reg,
-				     c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
+		if ((ops->get_cr(4, ctxt->vcpu) & X86_CR4_DE) &&
+		    (c->modrm_reg == 4 || c->modrm_reg == 5)) {
+			kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
+			goto done;
+		}
+		emulator_set_dr(ctxt, c->modrm_reg, c->regs[c->modrm_rm]);
 		c->dst.type = OP_NONE;	/* no writeback */
 		break;
 	case 0x30:
 		/* wrmsr */
 		msr_data = (u32)c->regs[VCPU_REGS_RAX]
 			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
-		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
-		if (rc) {
+		if (kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data)) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
+			goto done;
 		}
 		rc = X86EMUL_CONTINUE;
 		c->dst.type = OP_NONE;
 		break;
 	case 0x32:
 		/* rdmsr */
-		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
-		if (rc) {
+		if (kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data)) {
 			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
+			goto done;
 		} else {
 			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
 			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
@@ -2391,14 +3136,16 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0x34:		/* sysenter */
-		if (emulate_sysenter(ctxt) == -1)
-			goto cannot_emulate;
+		rc = emulate_sysenter(ctxt);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
 		else
 			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
-		if (emulate_sysexit(ctxt) == -1)
-			goto cannot_emulate;
+		rc = emulate_sysexit(ctxt);
+		if (rc != X86EMUL_CONTINUE)
+			goto done;
 		else
 			goto writeback;
 		break;
@@ -2417,7 +3164,7 @@ twobyte_insn:
 		break;
 	case 0xa1:	 /* pop fs */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_FS);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0xa3:
@@ -2436,7 +3183,7 @@ twobyte_insn:
 		break;
 	case 0xa9:	/* pop gs */
 		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_GS);
-		if (rc != 0)
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
 	case 0xab:
@@ -2508,16 +3255,14 @@ twobyte_insn:
 							(u64) c->src.val;
 		break;
 	case 0xc7:		/* Grp9 (cmpxchg8b) */
-		rc = emulate_grp9(ctxt, ops, memop);
-		if (rc != 0)
+		rc = emulate_grp9(ctxt, ops);
+		if (rc != X86EMUL_CONTINUE)
 			goto done;
-		c->dst.type = OP_NONE;
 		break;
 	}
 	goto writeback;
 
 cannot_emulate:
 	DPRINTF("Cannot emulate %02x\n", c->b);
-	c->eip = saved_eip;
 	return -1;
 }
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 296aba4..0150aff 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -32,6 +32,7 @@
 #define pr_fmt(fmt) "pit: " fmt
 
 #include <linux/kvm_host.h>
+#include <linux/slab.h>
 
 #include "irq.h"
 #include "i8254.h"
@@ -242,11 +243,11 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 {
 	struct kvm_kpit_state *ps = container_of(kian, struct kvm_kpit_state,
 						 irq_ack_notifier);
-	spin_lock(&ps->inject_lock);
+	raw_spin_lock(&ps->inject_lock);
 	if (atomic_dec_return(&ps->pit_timer.pending) < 0)
 		atomic_inc(&ps->pit_timer.pending);
 	ps->irq_ack = 1;
-	spin_unlock(&ps->inject_lock);
+	raw_spin_unlock(&ps->inject_lock);
 }
 
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
@@ -467,6 +468,9 @@ static int pit_ioport_read(struct kvm_io_device *this,
 		return -EOPNOTSUPP;
 
 	addr &= KVM_PIT_CHANNEL_MASK;
+	if (addr == 3)
+		return 0;
+
 	s = &pit_state->channels[addr];
 
 	mutex_lock(&pit_state->lock);
@@ -602,7 +606,7 @@ static const struct kvm_io_device_ops speaker_dev_ops = {
 	.write    = speaker_ioport_write,
 };
 
-/* Caller must have writers lock on slots_lock */
+/* Caller must hold slots_lock */
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
@@ -621,7 +625,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 
 	mutex_init(&pit->pit_state.lock);
 	mutex_lock(&pit->pit_state.lock);
-	spin_lock_init(&pit->pit_state.inject_lock);
+	raw_spin_lock_init(&pit->pit_state.inject_lock);
 
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
@@ -642,13 +646,13 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	ret = __kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, &pit->dev);
 	if (ret < 0)
 		goto fail;
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		ret = __kvm_io_bus_register_dev(&kvm->pio_bus,
+		ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS,
 						&pit->speaker_dev);
 		if (ret < 0)
 			goto fail_unregister;
@@ -657,11 +661,12 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	return pit;
 
 fail_unregister:
-	__kvm_io_bus_unregister_dev(&kvm->pio_bus, &pit->dev);
+	kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->dev);
 
 fail:
-	if (pit->irq_source_id >= 0)
-		kvm_free_irq_source_id(kvm, pit->irq_source_id);
+	kvm_unregister_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+	kvm_unregister_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
+	kvm_free_irq_source_id(kvm, pit->irq_source_id);
 
 	kfree(pit);
 	return NULL;
@@ -720,12 +725,12 @@ void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
 		/* Try to inject pending interrupts when
 		 * last one has been acked.
 		 */
-		spin_lock(&ps->inject_lock);
+		raw_spin_lock(&ps->inject_lock);
 		if (atomic_read(&ps->pit_timer.pending) && ps->irq_ack) {
 			ps->irq_ack = 0;
 			inject = 1;
 		}
-		spin_unlock(&ps->inject_lock);
+		raw_spin_unlock(&ps->inject_lock);
 		if (inject)
 			__inject_pit_timer_intr(kvm);
 	}
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index d4c1c7f..900d6b0 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -27,7 +27,7 @@ struct kvm_kpit_state {
 	u32    speaker_data_on;
 	struct mutex lock;
 	struct kvm_pit *pit;
-	spinlock_t inject_lock;
+	raw_spinlock_t inject_lock;
 	unsigned long irq_ack;
 	struct kvm_irq_ack_notifier irq_ack_notifier;
 };
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index d057c0c..93825ff 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -26,12 +26,36 @@
  *   Port from Qemu.
  */
 #include <linux/mm.h>
+#include <linux/slab.h>
 #include <linux/bitops.h>
 #include "irq.h"
 
 #include <linux/kvm_host.h>
 #include "trace.h"
 
+static void pic_lock(struct kvm_pic *s)
+	__acquires(&s->lock)
+{
+	raw_spin_lock(&s->lock);
+}
+
+static void pic_unlock(struct kvm_pic *s)
+	__releases(&s->lock)
+{
+	bool wakeup = s->wakeup_needed;
+	struct kvm_vcpu *vcpu;
+
+	s->wakeup_needed = false;
+
+	raw_spin_unlock(&s->lock);
+
+	if (wakeup) {
+		vcpu = s->kvm->bsp_vcpu;
+		if (vcpu)
+			kvm_vcpu_kick(vcpu);
+	}
+}
+
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 {
 	s->isr &= ~(1 << irq);
@@ -44,18 +68,19 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 	 * Other interrupt may be delivered to PIC while lock is dropped but
 	 * it should be safe since PIC state is already updated at this stage.
 	 */
-	spin_unlock(&s->pics_state->lock);
+	pic_unlock(s->pics_state);
 	kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
-	spin_lock(&s->pics_state->lock);
+	pic_lock(s->pics_state);
 }
 
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
 {
 	struct kvm_pic *s = pic_irqchip(kvm);
-	spin_lock(&s->lock);
+
+	pic_lock(s);
 	s->pics[0].isr_ack = 0xff;
 	s->pics[1].isr_ack = 0xff;
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 }
 
 /*
@@ -156,9 +181,9 @@ static void pic_update_irq(struct kvm_pic *s)
 
 void kvm_pic_update_irq(struct kvm_pic *s)
 {
-	spin_lock(&s->lock);
+	pic_lock(s);
 	pic_update_irq(s);
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 }
 
 int kvm_pic_set_irq(void *opaque, int irq, int level)
@@ -166,14 +191,14 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 	struct kvm_pic *s = opaque;
 	int ret = -1;
 
-	spin_lock(&s->lock);
+	pic_lock(s);
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
 		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
 		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
 				      s->pics[irq >> 3].imr, ret == 0);
 	}
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 
 	return ret;
 }
@@ -203,7 +228,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	int irq, irq2, intno;
 	struct kvm_pic *s = pic_irqchip(kvm);
 
-	spin_lock(&s->lock);
+	pic_lock(s);
 	irq = pic_get_irq(&s->pics[0]);
 	if (irq >= 0) {
 		pic_intack(&s->pics[0], irq);
@@ -228,7 +253,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 		intno = s->pics[0].irq_base + irq;
 	}
 	pic_update_irq(s);
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 
 	return intno;
 }
@@ -442,7 +467,7 @@ static int picdev_write(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte write\n");
 		return 0;
 	}
-	spin_lock(&s->lock);
+	pic_lock(s);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -455,7 +480,7 @@ static int picdev_write(struct kvm_io_device *this,
 		elcr_ioport_write(&s->pics[addr & 1], addr, data);
 		break;
 	}
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 	return 0;
 }
 
@@ -472,7 +497,7 @@ static int picdev_read(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte read\n");
 		return 0;
 	}
-	spin_lock(&s->lock);
+	pic_lock(s);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -486,7 +511,7 @@ static int picdev_read(struct kvm_io_device *this,
 		break;
 	}
 	*(unsigned char *)val = data;
-	spin_unlock(&s->lock);
+	pic_unlock(s);
 	return 0;
 }
 
@@ -503,7 +528,7 @@ static void pic_irq_request(void *opaque, int level)
 	s->output = level;
 	if (vcpu && level && (s->pics[0].isr_ack & (1 << irq))) {
 		s->pics[0].isr_ack &= ~(1 << irq);
-		kvm_vcpu_kick(vcpu);
+		s->wakeup_needed = true;
 	}
 }
 
@@ -520,7 +545,7 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	s = kzalloc(sizeof(struct kvm_pic), GFP_KERNEL);
 	if (!s)
 		return NULL;
-	spin_lock_init(&s->lock);
+	raw_spin_lock_init(&s->lock);
 	s->kvm = kvm;
 	s->pics[0].elcr_mask = 0xf8;
 	s->pics[1].elcr_mask = 0xde;
@@ -533,7 +558,9 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	 * Initialize PIO device
 	 */
 	kvm_iodevice_init(&s->dev, &picdev_ops);
-	ret = kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+	mutex_lock(&kvm->slots_lock);
+	ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, &s->dev);
+	mutex_unlock(&kvm->slots_lock);
 	if (ret < 0) {
 		kfree(s);
 		return NULL;
@@ -541,3 +568,14 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 
 	return s;
 }
+
+void kvm_destroy_pic(struct kvm *kvm)
+{
+	struct kvm_pic *vpic = kvm->arch.vpic;
+
+	if (vpic) {
+		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &vpic->dev);
+		kvm->arch.vpic = NULL;
+		kfree(vpic);
+	}
+}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index be399e2..cd1f362 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -62,7 +62,8 @@ struct kvm_kpic_state {
 };
 
 struct kvm_pic {
-	spinlock_t lock;
+	raw_spinlock_t lock;
+	bool wakeup_needed;
 	unsigned pending_acks;
 	struct kvm *kvm;
 	struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
@@ -75,6 +76,7 @@ struct kvm_pic {
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm);
+void kvm_destroy_pic(struct kvm *kvm);
 int kvm_pic_read_irq(struct kvm *kvm);
 void kvm_pic_update_irq(struct kvm_pic *s);
 void kvm_pic_clear_isr_ack(struct kvm *kvm);
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index 7bcc5b6..cff851c 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -1,6 +1,11 @@
 #ifndef ASM_KVM_CACHE_REGS_H
 #define ASM_KVM_CACHE_REGS_H
 
+#define KVM_POSSIBLE_CR0_GUEST_BITS X86_CR0_TS
+#define KVM_POSSIBLE_CR4_GUEST_BITS				  \
+	(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR  \
+	 | X86_CR4_OSXMMEXCPT | X86_CR4_PGE)
+
 static inline unsigned long kvm_register_read(struct kvm_vcpu *vcpu,
 					      enum kvm_reg reg)
 {
@@ -38,4 +43,30 @@ static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
 	return vcpu->arch.pdptrs[index];
 }
 
+static inline ulong kvm_read_cr0_bits(struct kvm_vcpu *vcpu, ulong mask)
+{
+	ulong tmask = mask & KVM_POSSIBLE_CR0_GUEST_BITS;
+	if (tmask & vcpu->arch.cr0_guest_owned_bits)
+		kvm_x86_ops->decache_cr0_guest_bits(vcpu);
+	return vcpu->arch.cr0 & mask;
+}
+
+static inline ulong kvm_read_cr0(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr0_bits(vcpu, ~0UL);
+}
+
+static inline ulong kvm_read_cr4_bits(struct kvm_vcpu *vcpu, ulong mask)
+{
+	ulong tmask = mask & KVM_POSSIBLE_CR4_GUEST_BITS;
+	if (tmask & vcpu->arch.cr4_guest_owned_bits)
+		kvm_x86_ops->decache_cr4_guest_bits(vcpu);
+	return vcpu->arch.cr4 & mask;
+}
+
+static inline ulong kvm_read_cr4(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr4_bits(vcpu, ~0UL);
+}
+
 #endif
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
index 55c7524..64bc6ea 100644
--- a/arch/x86/kvm/kvm_timer.h
+++ b/arch/x86/kvm/kvm_timer.h
@@ -10,9 +10,7 @@ struct kvm_timer {
 };
 
 struct kvm_timer_ops {
-        bool (*is_periodic)(struct kvm_timer *);
+	bool (*is_periodic)(struct kvm_timer *);
 };
 
-
 enum hrtimer_restart kvm_timer_fn(struct hrtimer *data);
-
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ba8c045..1eb7a4a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/math64.h>
+#include <linux/slab.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 #include <asm/page.h>
@@ -1246,3 +1247,34 @@ int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data)
 
 	return 0;
 }
+
+int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 reg, u64 data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return 1;
+
+	/* if this is ICR write vector before command */
+	if (reg == APIC_ICR)
+		apic_reg_write(apic, APIC_ICR2, (u32)(data >> 32));
+	return apic_reg_write(apic, reg, (u32)data);
+}
+
+int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	u32 low, high = 0;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return 1;
+
+	if (apic_reg_read(apic, reg, 4, &low))
+		return 1;
+	if (reg == APIC_ICR)
+		apic_reg_read(apic, APIC_ICR2, 4, &high);
+
+	*data = (((u64)high) << 32) | low;
+
+	return 0;
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 40010b0..f5fe32c 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -48,4 +48,12 @@ void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
 
 int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
 int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
+
+int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
+
+static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.hv_vapic & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE;
+}
 #endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 89a49fb..b1ed0a1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -18,6 +18,7 @@
  */
 
 #include "mmu.h"
+#include "x86.h"
 #include "kvm_cache_regs.h"
 
 #include <linux/kvm_host.h>
@@ -29,6 +30,8 @@
 #include <linux/swap.h>
 #include <linux/hugetlb.h>
 #include <linux/compiler.h>
+#include <linux/srcu.h>
+#include <linux/slab.h>
 
 #include <asm/page.h>
 #include <asm/cmpxchg.h>
@@ -136,16 +139,6 @@ module_param(oos_shadow, bool, 0644);
 #define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | PT_USER_MASK \
 			| PT64_NX_MASK)
 
-#define PFERR_PRESENT_MASK (1U << 0)
-#define PFERR_WRITE_MASK (1U << 1)
-#define PFERR_USER_MASK (1U << 2)
-#define PFERR_RSVD_MASK (1U << 3)
-#define PFERR_FETCH_MASK (1U << 4)
-
-#define PT_PDPE_LEVEL 3
-#define PT_DIRECTORY_LEVEL 2
-#define PT_PAGE_TABLE_LEVEL 1
-
 #define RMAP_EXT 4
 
 #define ACC_EXEC_MASK    1
@@ -153,6 +146,8 @@ module_param(oos_shadow, bool, 0644);
 #define ACC_USER_MASK    PT_USER_MASK
 #define ACC_ALL          (ACC_EXEC_MASK | ACC_WRITE_MASK | ACC_USER_MASK)
 
+#include <trace/events/kvm.h>
+
 #define CREATE_TRACE_POINTS
 #include "mmutrace.h"
 
@@ -178,12 +173,7 @@ struct kvm_shadow_walk_iterator {
 	     shadow_walk_okay(&(_walker));			\
 	     shadow_walk_next(&(_walker)))
 
-
-struct kvm_unsync_walk {
-	int (*entry) (struct kvm_mmu_page *sp, struct kvm_unsync_walk *walk);
-};
-
-typedef int (*mmu_parent_walk_fn) (struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp);
+typedef int (*mmu_parent_walk_fn) (struct kvm_mmu_page *sp);
 
 static struct kmem_cache *pte_chain_cache;
 static struct kmem_cache *rmap_desc_cache;
@@ -227,9 +217,9 @@ void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes);
 
-static int is_write_protection(struct kvm_vcpu *vcpu)
+static bool is_write_protection(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.cr0 & X86_CR0_WP;
+	return kvm_read_cr0_bits(vcpu, X86_CR0_WP);
 }
 
 static int is_cpuid_PSE36(void)
@@ -239,7 +229,7 @@ static int is_cpuid_PSE36(void)
 
 static int is_nx(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.shadow_efer & EFER_NX;
+	return vcpu->arch.efer & EFER_NX;
 }
 
 static int is_shadow_present_pte(u64 pte)
@@ -253,7 +243,7 @@ static int is_large_pte(u64 pte)
 	return pte & PT_PAGE_SIZE_MASK;
 }
 
-static int is_writeble_pte(unsigned long pte)
+static int is_writable_pte(unsigned long pte)
 {
 	return pte & PT_WRITABLE_MASK;
 }
@@ -331,7 +321,6 @@ static int mmu_topup_memory_cache_page(struct kvm_mmu_memory_cache *cache,
 		page = alloc_page(GFP_KERNEL);
 		if (!page)
 			return -ENOMEM;
-		set_page_private(page, 0);
 		cache->objects[cache->nobjs++] = page_address(page);
 	}
 	return 0;
@@ -442,9 +431,9 @@ static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
 	int i;
 
 	gfn = unalias_gfn(kvm, gfn);
+	slot = gfn_to_memslot_unaliased(kvm, gfn);
 	for (i = PT_DIRECTORY_LEVEL;
 	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
-		slot          = gfn_to_memslot_unaliased(kvm, gfn);
 		write_count   = slot_largepage_idx(gfn, slot, i);
 		*write_count -= 1;
 		WARN_ON(*write_count < 0);
@@ -470,24 +459,10 @@ static int has_wrprotected_page(struct kvm *kvm,
 
 static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
 {
-	unsigned long page_size = PAGE_SIZE;
-	struct vm_area_struct *vma;
-	unsigned long addr;
+	unsigned long page_size;
 	int i, ret = 0;
 
-	addr = gfn_to_hva(kvm, gfn);
-	if (kvm_is_error_hva(addr))
-		return PT_PAGE_TABLE_LEVEL;
-
-	down_read(&current->mm->mmap_sem);
-	vma = find_vma(current->mm, addr);
-	if (!vma)
-		goto out;
-
-	page_size = vma_kernel_pagesize(vma);
-
-out:
-	up_read(&current->mm->mmap_sem);
+	page_size = kvm_host_page_size(kvm, gfn);
 
 	for (i = PT_PAGE_TABLE_LEVEL;
 	     i < (PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES); ++i) {
@@ -503,8 +478,7 @@ out:
 static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
 {
 	struct kvm_memory_slot *slot;
-	int host_level;
-	int level = PT_PAGE_TABLE_LEVEL;
+	int host_level, level, max_level;
 
 	slot = gfn_to_memslot(vcpu->kvm, large_gfn);
 	if (slot && slot->dirty_bitmap)
@@ -515,7 +489,10 @@ static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
 	if (host_level == PT_PAGE_TABLE_LEVEL)
 		return host_level;
 
-	for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level)
+	max_level = kvm_x86_ops->get_lpage_level() < host_level ?
+		kvm_x86_ops->get_lpage_level() : host_level;
+
+	for (level = PT_DIRECTORY_LEVEL; level <= max_level; ++level)
 		if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
 			break;
 
@@ -633,7 +610,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	pfn = spte_to_pfn(*spte);
 	if (*spte & shadow_accessed_mask)
 		kvm_set_pfn_accessed(pfn);
-	if (is_writeble_pte(*spte))
+	if (is_writable_pte(*spte))
 		kvm_set_pfn_dirty(pfn);
 	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
 	if (!*rmapp) {
@@ -662,6 +639,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 			prev_desc = desc;
 			desc = desc->more;
 		}
+		pr_err("rmap_remove: %p %llx many->many\n", spte, *spte);
 		BUG();
 	}
 }
@@ -669,7 +647,6 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
 {
 	struct kvm_rmap_desc *desc;
-	struct kvm_rmap_desc *prev_desc;
 	u64 *prev_spte;
 	int i;
 
@@ -681,7 +658,6 @@ static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
 		return NULL;
 	}
 	desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
-	prev_desc = NULL;
 	prev_spte = NULL;
 	while (desc) {
 		for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i) {
@@ -708,7 +684,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		BUG_ON(!spte);
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
-		if (is_writeble_pte(*spte)) {
+		if (is_writable_pte(*spte)) {
 			__set_spte(spte, *spte & ~PT_WRITABLE_MASK);
 			write_protected = 1;
 		}
@@ -732,7 +708,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 			BUG_ON(!(*spte & PT_PRESENT_MASK));
 			BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
 			pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
-			if (is_writeble_pte(*spte)) {
+			if (is_writable_pte(*spte)) {
 				rmap_remove(kvm, spte);
 				--kvm->stat.lpages;
 				__set_spte(spte, shadow_trap_nonpresent_pte);
@@ -787,7 +763,7 @@ static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
 
 			new_spte &= ~PT_WRITABLE_MASK;
 			new_spte &= ~SPTE_HOST_WRITEABLE;
-			if (is_writeble_pte(*spte))
+			if (is_writable_pte(*spte))
 				kvm_set_pfn_dirty(spte_to_pfn(*spte));
 			__set_spte(spte, new_spte);
 			spte = rmap_next(kvm, rmapp, spte);
@@ -805,35 +781,32 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 					 unsigned long data))
 {
 	int i, j;
+	int ret;
 	int retval = 0;
+	struct kvm_memslots *slots;
 
-	/*
-	 * If mmap_sem isn't taken, we can look the memslots with only
-	 * the mmu_lock by skipping over the slots with userspace_addr == 0.
-	 */
-	for (i = 0; i < kvm->nmemslots; i++) {
-		struct kvm_memory_slot *memslot = &kvm->memslots[i];
+	slots = kvm_memslots(kvm);
+
+	for (i = 0; i < slots->nmemslots; i++) {
+		struct kvm_memory_slot *memslot = &slots->memslots[i];
 		unsigned long start = memslot->userspace_addr;
 		unsigned long end;
 
-		/* mmu_lock protects userspace_addr */
-		if (!start)
-			continue;
-
 		end = start + (memslot->npages << PAGE_SHIFT);
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
 
-			retval |= handler(kvm, &memslot->rmap[gfn_offset],
-					  data);
+			ret = handler(kvm, &memslot->rmap[gfn_offset], data);
 
 			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
 				int idx = gfn_offset;
 				idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
-				retval |= handler(kvm,
+				ret |= handler(kvm,
 					&memslot->lpage_info[j][idx].rmap_pde,
 					data);
 			}
+			trace_kvm_age_page(hva, memslot, ret);
+			retval |= ret;
 		}
 	}
 
@@ -856,9 +829,15 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	u64 *spte;
 	int young = 0;
 
-	/* always return old for EPT */
+	/*
+	 * Emulate the accessed bit for EPT, by checking if this page has
+	 * an EPT mapping, and clearing it if it does. On the next access,
+	 * a new EPT mapping will be established.
+	 * This has some overhead, but not as much as the cost of swapping
+	 * out actively used pages or breaking up actively used hugepages.
+	 */
 	if (!shadow_accessed_mask)
-		return 0;
+		return kvm_unmap_rmapp(kvm, rmapp, data);
 
 	spte = rmap_next(kvm, rmapp, NULL);
 	while (spte) {
@@ -937,7 +916,6 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
 	sp->gfns = mmu_memory_cache_alloc(&vcpu->arch.mmu_page_cache, PAGE_SIZE);
 	set_page_private(virt_to_page(sp->spt), (unsigned long)sp);
 	list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages);
-	INIT_LIST_HEAD(&sp->oos_link);
 	bitmap_zero(sp->slot_bitmap, KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS);
 	sp->multimapped = 0;
 	sp->parent_pte = parent_pte;
@@ -1021,8 +999,7 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 }
 
 
-static void mmu_parent_walk(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
-			    mmu_parent_walk_fn fn)
+static void mmu_parent_walk(struct kvm_mmu_page *sp, mmu_parent_walk_fn fn)
 {
 	struct kvm_pte_chain *pte_chain;
 	struct hlist_node *node;
@@ -1031,8 +1008,8 @@ static void mmu_parent_walk(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 
 	if (!sp->multimapped && sp->parent_pte) {
 		parent_sp = page_header(__pa(sp->parent_pte));
-		fn(vcpu, parent_sp);
-		mmu_parent_walk(vcpu, parent_sp, fn);
+		fn(parent_sp);
+		mmu_parent_walk(parent_sp, fn);
 		return;
 	}
 	hlist_for_each_entry(pte_chain, node, &sp->parent_ptes, link)
@@ -1040,8 +1017,8 @@ static void mmu_parent_walk(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 			if (!pte_chain->parent_ptes[i])
 				break;
 			parent_sp = page_header(__pa(pte_chain->parent_ptes[i]));
-			fn(vcpu, parent_sp);
-			mmu_parent_walk(vcpu, parent_sp, fn);
+			fn(parent_sp);
+			mmu_parent_walk(parent_sp, fn);
 		}
 }
 
@@ -1078,16 +1055,15 @@ static void kvm_mmu_update_parents_unsync(struct kvm_mmu_page *sp)
 		}
 }
 
-static int unsync_walk_fn(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+static int unsync_walk_fn(struct kvm_mmu_page *sp)
 {
 	kvm_mmu_update_parents_unsync(sp);
 	return 1;
 }
 
-static void kvm_mmu_mark_parents_unsync(struct kvm_vcpu *vcpu,
-					struct kvm_mmu_page *sp)
+static void kvm_mmu_mark_parents_unsync(struct kvm_mmu_page *sp)
 {
-	mmu_parent_walk(vcpu, sp, unsync_walk_fn);
+	mmu_parent_walk(sp, unsync_walk_fn);
 	kvm_mmu_update_parents_unsync(sp);
 }
 
@@ -1213,6 +1189,7 @@ static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 static void kvm_unlink_unsync_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	WARN_ON(!sp->unsync);
+	trace_kvm_mmu_sync_page(sp);
 	sp->unsync = 0;
 	--kvm->stat.mmu_unsync;
 }
@@ -1221,12 +1198,11 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp);
 
 static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
-	if (sp->role.glevels != vcpu->arch.mmu.root_level) {
+	if (sp->role.cr4_pae != !!is_pae(vcpu)) {
 		kvm_mmu_zap_page(vcpu->kvm, sp);
 		return 1;
 	}
 
-	trace_kvm_mmu_sync_page(sp);
 	if (rmap_write_protect(vcpu->kvm, sp->gfn))
 		kvm_flush_remote_tlbs(vcpu->kvm);
 	kvm_unlink_unsync_page(vcpu->kvm, sp);
@@ -1343,6 +1319,8 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	role = vcpu->arch.mmu.base_role;
 	role.level = level;
 	role.direct = direct;
+	if (role.direct)
+		role.cr4_pae = 0;
 	role.access = access;
 	if (vcpu->arch.mmu.root_level <= PT32_ROOT_LEVEL) {
 		quadrant = gaddr >> (PAGE_SHIFT + (PT64_PT_BITS * level));
@@ -1363,7 +1341,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 			mmu_page_add_parent_pte(vcpu, sp, parent_pte);
 			if (sp->unsync_children) {
 				set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
-				kvm_mmu_mark_parents_unsync(vcpu, sp);
+				kvm_mmu_mark_parents_unsync(sp);
 			}
 			trace_kvm_mmu_get_page(sp, false);
 			return sp;
@@ -1502,8 +1480,8 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 		for_each_sp(pages, sp, parents, i) {
 			kvm_mmu_zap_page(kvm, sp);
 			mmu_pages_clear_parents(&parents);
+			zapped++;
 		}
-		zapped += pages.nr;
 		kvm_mmu_pages_init(parent, &parents, &pages);
 	}
 
@@ -1554,14 +1532,16 @@ void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 	 */
 
 	if (used_pages > kvm_nr_mmu_pages) {
-		while (used_pages > kvm_nr_mmu_pages) {
+		while (used_pages > kvm_nr_mmu_pages &&
+			!list_empty(&kvm->arch.active_mmu_pages)) {
 			struct kvm_mmu_page *page;
 
 			page = container_of(kvm->arch.active_mmu_pages.prev,
 					    struct kvm_mmu_page, link);
-			kvm_mmu_zap_page(kvm, page);
+			used_pages -= kvm_mmu_zap_page(kvm, page);
 			used_pages--;
 		}
+		kvm_nr_mmu_pages = used_pages;
 		kvm->arch.n_free_mmu_pages = 0;
 	}
 	else
@@ -1583,13 +1563,14 @@ static int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 	r = 0;
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &kvm->arch.mmu_page_hash[index];
+restart:
 	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link)
 		if (sp->gfn == gfn && !sp->role.direct) {
 			pgprintk("%s: gfn %lx role %x\n", __func__, gfn,
 				 sp->role.word);
 			r = 1;
 			if (kvm_mmu_zap_page(kvm, sp))
-				n = bucket->first;
+				goto restart;
 		}
 	return r;
 }
@@ -1603,19 +1584,21 @@ static void mmu_unshadow(struct kvm *kvm, gfn_t gfn)
 
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &kvm->arch.mmu_page_hash[index];
+restart:
 	hlist_for_each_entry_safe(sp, node, nn, bucket, hash_link) {
 		if (sp->gfn == gfn && !sp->role.direct
 		    && !sp->role.invalid) {
 			pgprintk("%s: zap %lx %x\n",
 				 __func__, gfn, sp->role.word);
-			kvm_mmu_zap_page(kvm, sp);
+			if (kvm_mmu_zap_page(kvm, sp))
+				goto restart;
 		}
 	}
 }
 
 static void page_header_update_slot(struct kvm *kvm, void *pte, gfn_t gfn)
 {
-	int slot = memslot_id(kvm, gfn_to_memslot(kvm, gfn));
+	int slot = memslot_id(kvm, gfn);
 	struct kvm_mmu_page *sp = page_header(__pa(pte));
 
 	__set_bit(slot, sp->slot_bitmap);
@@ -1635,20 +1618,6 @@ static void mmu_convert_notrap(struct kvm_mmu_page *sp)
 	}
 }
 
-struct page *gva_to_page(struct kvm_vcpu *vcpu, gva_t gva)
-{
-	struct page *page;
-
-	gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
-
-	if (gpa == UNMAPPED_GVA)
-		return NULL;
-
-	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
-
-	return page;
-}
-
 /*
  * The function is based on mtrr_type_lookup() in
  * arch/x86/kernel/cpu/mtrr/generic.c
@@ -1761,7 +1730,6 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	struct kvm_mmu_page *s;
 	struct hlist_node *node, *n;
 
-	trace_kvm_mmu_unsync_page(sp);
 	index = kvm_page_table_hashfn(sp->gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	/* don't unsync if pagetable is shadowed with multiple roles */
@@ -1771,10 +1739,11 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		if (s->role.word != sp->role.word)
 			return 1;
 	}
+	trace_kvm_mmu_unsync_page(sp);
 	++vcpu->kvm->stat.mmu_unsync;
 	sp->unsync = 1;
 
-	kvm_mmu_mark_parents_unsync(vcpu, sp);
+	kvm_mmu_mark_parents_unsync(sp);
 
 	mmu_convert_notrap(sp);
 	return 0;
@@ -1846,13 +1815,16 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 		spte |= PT_WRITABLE_MASK;
 
+		if (!tdp_enabled && !(pte_access & ACC_WRITE_MASK))
+			spte &= ~PT_USER_MASK;
+
 		/*
 		 * Optimization: for pte sync, if spte was writable the hash
 		 * lookup is unnecessary (and expensive). Write protection
 		 * is responsibility of mmu_get_page / kvm_sync_page.
 		 * Same reasoning can be applied to dirty page accounting.
 		 */
-		if (!can_unsync && is_writeble_pte(*sptep))
+		if (!can_unsync && is_writable_pte(*sptep))
 			goto set_pte;
 
 		if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
@@ -1860,7 +1832,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 				 __func__, gfn);
 			ret = 1;
 			pte_access &= ~ACC_WRITE_MASK;
-			if (is_writeble_pte(spte))
+			if (is_writable_pte(spte))
 				spte &= ~PT_WRITABLE_MASK;
 		}
 	}
@@ -1881,7 +1853,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 bool reset_host_protection)
 {
 	int was_rmapped = 0;
-	int was_writeble = is_writeble_pte(*sptep);
+	int was_writable = is_writable_pte(*sptep);
 	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
@@ -1901,10 +1873,14 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
 			mmu_page_remove_parent_pte(child, sptep);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else if (pfn != spte_to_pfn(*sptep)) {
 			pgprintk("hfn old %lx new %lx\n",
 				 spte_to_pfn(*sptep), pfn);
 			rmap_remove(vcpu->kvm, sptep);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
+			kvm_flush_remote_tlbs(vcpu->kvm);
 		} else
 			was_rmapped = 1;
 	}
@@ -1932,7 +1908,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, sptep, gfn);
 	} else {
-		if (was_writeble)
+		if (was_writable)
 			kvm_release_pfn_dirty(pfn);
 		else
 			kvm_release_pfn_clean(pfn);
@@ -2090,21 +2066,23 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		hpa_t root = vcpu->arch.mmu.root_hpa;
 
 		ASSERT(!VALID_PAGE(root));
-		if (tdp_enabled)
-			direct = 1;
 		if (mmu_check_root(vcpu, root_gfn))
 			return 1;
+		if (tdp_enabled) {
+			direct = 1;
+			root_gfn = 0;
+		}
+		spin_lock(&vcpu->kvm->mmu_lock);
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
 				      PT64_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
+		spin_unlock(&vcpu->kvm->mmu_lock);
 		vcpu->arch.mmu.root_hpa = root;
 		return 0;
 	}
 	direct = !is_paging(vcpu);
-	if (tdp_enabled)
-		direct = 1;
 	for (i = 0; i < 4; ++i) {
 		hpa_t root = vcpu->arch.mmu.pae_root[i];
 
@@ -2120,11 +2098,18 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 			root_gfn = 0;
 		if (mmu_check_root(vcpu, root_gfn))
 			return 1;
+		if (tdp_enabled) {
+			direct = 1;
+			root_gfn = i << 30;
+		}
+		spin_lock(&vcpu->kvm->mmu_lock);
 		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
 				      PT32_ROOT_LEVEL, direct,
 				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
+		spin_unlock(&vcpu->kvm->mmu_lock);
+
 		vcpu->arch.mmu.pae_root[i] = root | PT_PRESENT_MASK;
 	}
 	vcpu->arch.mmu.root_hpa = __pa(vcpu->arch.mmu.pae_root);
@@ -2162,8 +2147,11 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 }
 
-static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr)
+static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr,
+				  u32 access, u32 *error)
 {
+	if (error)
+		*error = 0;
 	return vaddr;
 }
 
@@ -2305,13 +2293,19 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		/* no rsvd bits for 2 level 4K page table entries */
 		context->rsvd_bits_mask[0][1] = 0;
 		context->rsvd_bits_mask[0][0] = 0;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[0][0];
+
+		if (!is_pse(vcpu)) {
+			context->rsvd_bits_mask[1][1] = 0;
+			break;
+		}
+
 		if (is_cpuid_PSE36())
 			/* 36bits PSE 4MB page */
 			context->rsvd_bits_mask[1][1] = rsvd_bits(17, 21);
 		else
 			/* 32 bits PSE 4MB page */
 			context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
-		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT32E_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][2] =
@@ -2324,7 +2318,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 62) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[0][0];
 		break;
 	case PT64_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2342,7 +2336,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[0][0];
 		break;
 	}
 }
@@ -2444,7 +2438,8 @@ static int init_kvm_softmmu(struct kvm_vcpu *vcpu)
 	else
 		r = paging32_init_context(vcpu);
 
-	vcpu->arch.mmu.base_role.glevels = vcpu->arch.mmu.root_level;
+	vcpu->arch.mmu.base_role.cr4_pae = !!is_pae(vcpu);
+	vcpu->arch.mmu.base_role.cr0_wp = is_write_protection(vcpu);
 
 	return r;
 }
@@ -2484,7 +2479,9 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 		goto out;
 	spin_lock(&vcpu->kvm->mmu_lock);
 	kvm_mmu_free_some_pages(vcpu);
+	spin_unlock(&vcpu->kvm->mmu_lock);
 	r = mmu_alloc_roots(vcpu);
+	spin_lock(&vcpu->kvm->mmu_lock);
 	mmu_sync_roots(vcpu);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	if (r)
@@ -2533,7 +2530,7 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
         }
 
 	++vcpu->kvm->stat.mmu_pte_updated;
-	if (sp->role.glevels == PT32_ROOT_LEVEL)
+	if (!sp->role.cr4_pae)
 		paging32_update_pte(vcpu, sp, spte, new);
 	else
 		paging64_update_pte(vcpu, sp, spte, new);
@@ -2568,36 +2565,11 @@ static bool last_updated_pte_accessed(struct kvm_vcpu *vcpu)
 }
 
 static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
-					  const u8 *new, int bytes)
+					  u64 gpte)
 {
 	gfn_t gfn;
-	int r;
-	u64 gpte = 0;
 	pfn_t pfn;
 
-	if (bytes != 4 && bytes != 8)
-		return;
-
-	/*
-	 * Assume that the pte write on a page table of the same type
-	 * as the current vcpu paging mode.  This is nearly always true
-	 * (might be false while changing modes).  Note it is verified later
-	 * by update_pte().
-	 */
-	if (is_pae(vcpu)) {
-		/* Handle a 32-bit guest writing two halves of a 64-bit gpte */
-		if ((bytes == 4) && (gpa % 4 == 0)) {
-			r = kvm_read_guest(vcpu->kvm, gpa & ~(u64)7, &gpte, 8);
-			if (r)
-				return;
-			memcpy((void *)&gpte + (gpa % 8), new, 4);
-		} else if ((bytes == 8) && (gpa % 8 == 0)) {
-			memcpy((void *)&gpte, new, 8);
-		}
-	} else {
-		if ((bytes == 4) && (gpa % 4 == 0))
-			memcpy((void *)&gpte, new, 4);
-	}
 	if (!is_present_gpte(gpte))
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -2646,10 +2618,46 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	int flooded = 0;
 	int npte;
 	int r;
+	int invlpg_counter;
 
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
-	mmu_guess_page_from_pte_write(vcpu, gpa, new, bytes);
+
+	invlpg_counter = atomic_read(&vcpu->kvm->arch.invlpg_counter);
+
+	/*
+	 * Assume that the pte write on a page table of the same type
+	 * as the current vcpu paging mode.  This is nearly always true
+	 * (might be false while changing modes).  Note it is verified later
+	 * by update_pte().
+	 */
+	if ((is_pae(vcpu) && bytes == 4) || !new) {
+		/* Handle a 32-bit guest writing two halves of a 64-bit gpte */
+		if (is_pae(vcpu)) {
+			gpa &= ~(gpa_t)7;
+			bytes = 8;
+		}
+		r = kvm_read_guest(vcpu->kvm, gpa, &gentry, min(bytes, 8));
+		if (r)
+			gentry = 0;
+		new = (const u8 *)&gentry;
+	}
+
+	switch (bytes) {
+	case 4:
+		gentry = *(const u32 *)new;
+		break;
+	case 8:
+		gentry = *(const u64 *)new;
+		break;
+	default:
+		gentry = 0;
+		break;
+	}
+
+	mmu_guess_page_from_pte_write(vcpu, gpa, gentry);
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (atomic_read(&vcpu->kvm->arch.invlpg_counter) != invlpg_counter)
+		gentry = 0;
 	kvm_mmu_access_page(vcpu, gfn);
 	kvm_mmu_free_some_pages(vcpu);
 	++vcpu->kvm->stat.mmu_pte_write;
@@ -2668,10 +2676,12 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	}
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
+
+restart:
 	hlist_for_each_entry_safe(sp, node, n, bucket, hash_link) {
 		if (sp->gfn != gfn || sp->role.direct || sp->role.invalid)
 			continue;
-		pte_size = sp->role.glevels == PT32_ROOT_LEVEL ? 4 : 8;
+		pte_size = sp->role.cr4_pae ? 8 : 4;
 		misaligned = (offset ^ (offset + bytes - 1)) & ~(pte_size - 1);
 		misaligned |= bytes < 4;
 		if (misaligned || flooded) {
@@ -2688,14 +2698,14 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 			pgprintk("misaligned: gpa %llx bytes %d role %x\n",
 				 gpa, bytes, sp->role.word);
 			if (kvm_mmu_zap_page(vcpu->kvm, sp))
-				n = bucket->first;
+				goto restart;
 			++vcpu->kvm->stat.mmu_flooded;
 			continue;
 		}
 		page_offset = offset;
 		level = sp->role.level;
 		npte = 1;
-		if (sp->role.glevels == PT32_ROOT_LEVEL) {
+		if (!sp->role.cr4_pae) {
 			page_offset <<= 1;	/* 32->64 */
 			/*
 			 * A 32-bit pde maps 4MB while the shadow pdes map
@@ -2713,20 +2723,11 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 				continue;
 		}
 		spte = &sp->spt[page_offset / sizeof(*spte)];
-		if ((gpa & (pte_size - 1)) || (bytes < pte_size)) {
-			gentry = 0;
-			r = kvm_read_guest_atomic(vcpu->kvm,
-						  gpa & ~(u64)(pte_size - 1),
-						  &gentry, pte_size);
-			new = (const void *)&gentry;
-			if (r < 0)
-				new = NULL;
-		}
 		while (npte--) {
 			entry = *spte;
 			mmu_pte_write_zap_pte(vcpu, sp, spte);
-			if (new)
-				mmu_pte_write_new_pte(vcpu, sp, spte, new);
+			if (gentry)
+				mmu_pte_write_new_pte(vcpu, sp, spte, &gentry);
 			mmu_pte_write_flush_tlb(vcpu, entry, *spte);
 			++spte;
 		}
@@ -2747,7 +2748,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	if (tdp_enabled)
 		return 0;
 
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
+	gpa = kvm_mmu_gva_to_gpa_read(vcpu, gva, NULL);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	r = kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT);
@@ -2847,16 +2848,13 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
 	 */
 	page = alloc_page(GFP_KERNEL | __GFP_DMA32);
 	if (!page)
-		goto error_1;
+		return -ENOMEM;
+
 	vcpu->arch.mmu.pae_root = page_address(page);
 	for (i = 0; i < 4; ++i)
 		vcpu->arch.mmu.pae_root[i] = INVALID_PAGE;
 
 	return 0;
-
-error_1:
-	free_mmu_pages(vcpu);
-	return -ENOMEM;
 }
 
 int kvm_mmu_create(struct kvm_vcpu *vcpu)
@@ -2909,25 +2907,26 @@ void kvm_mmu_zap_all(struct kvm *kvm)
 	struct kvm_mmu_page *sp, *node;
 
 	spin_lock(&kvm->mmu_lock);
+restart:
 	list_for_each_entry_safe(sp, node, &kvm->arch.active_mmu_pages, link)
 		if (kvm_mmu_zap_page(kvm, sp))
-			node = container_of(kvm->arch.active_mmu_pages.next,
-					    struct kvm_mmu_page, link);
+			goto restart;
+
 	spin_unlock(&kvm->mmu_lock);
 
 	kvm_flush_remote_tlbs(kvm);
 }
 
-static void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
+static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm)
 {
 	struct kvm_mmu_page *page;
 
 	page = container_of(kvm->arch.active_mmu_pages.prev,
 			    struct kvm_mmu_page, link);
-	kvm_mmu_zap_page(kvm, page);
+	return kvm_mmu_zap_page(kvm, page) + 1;
 }
 
-static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
+static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask)
 {
 	struct kvm *kvm;
 	struct kvm *kvm_freed = NULL;
@@ -2936,23 +2935,22 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 	spin_lock(&kvm_lock);
 
 	list_for_each_entry(kvm, &vm_list, vm_list) {
-		int npages;
+		int npages, idx, freed_pages;
 
-		if (!down_read_trylock(&kvm->slots_lock))
-			continue;
+		idx = srcu_read_lock(&kvm->srcu);
 		spin_lock(&kvm->mmu_lock);
 		npages = kvm->arch.n_alloc_mmu_pages -
 			 kvm->arch.n_free_mmu_pages;
 		cache_count += npages;
 		if (!kvm_freed && nr_to_scan > 0 && npages > 0) {
-			kvm_mmu_remove_one_alloc_mmu_page(kvm);
-			cache_count--;
+			freed_pages = kvm_mmu_remove_some_alloc_mmu_pages(kvm);
+			cache_count -= freed_pages;
 			kvm_freed = kvm;
 		}
 		nr_to_scan--;
 
 		spin_unlock(&kvm->mmu_lock);
-		up_read(&kvm->slots_lock);
+		srcu_read_unlock(&kvm->srcu, idx);
 	}
 	if (kvm_freed)
 		list_move_tail(&kvm_freed->vm_list, &vm_list);
@@ -3019,9 +3017,12 @@ unsigned int kvm_mmu_calculate_mmu_pages(struct kvm *kvm)
 	int i;
 	unsigned int nr_mmu_pages;
 	unsigned int  nr_pages = 0;
+	struct kvm_memslots *slots;
+
+	slots = kvm_memslots(kvm);
 
-	for (i = 0; i < kvm->nmemslots; i++)
-		nr_pages += kvm->memslots[i].npages;
+	for (i = 0; i < slots->nmemslots; i++)
+		nr_pages += slots->memslots[i].npages;
 
 	nr_mmu_pages = nr_pages * KVM_PERMILLE_MMU_PAGES / 1000;
 	nr_mmu_pages = max(nr_mmu_pages,
@@ -3182,8 +3183,7 @@ static gva_t canonicalize(gva_t gva)
 }
 
 
-typedef void (*inspect_spte_fn) (struct kvm *kvm, struct kvm_mmu_page *sp,
-				 u64 *sptep);
+typedef void (*inspect_spte_fn) (struct kvm *kvm, u64 *sptep);
 
 static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
 			    inspect_spte_fn fn)
@@ -3199,7 +3199,7 @@ static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
 				child = page_header(ent & PT64_BASE_ADDR_MASK);
 				__mmu_spte_walk(kvm, child, fn);
 			} else
-				fn(kvm, sp, &sp->spt[i]);
+				fn(kvm, &sp->spt[i]);
 		}
 	}
 }
@@ -3246,7 +3246,7 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 		if (is_shadow_present_pte(ent) && !is_last_spte(ent, level))
 			audit_mappings_page(vcpu, ent, va, level - 1);
 		else {
-			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
+			gpa_t gpa = kvm_mmu_gva_to_gpa_read(vcpu, va, NULL);
 			gfn_t gfn = gpa >> PAGE_SHIFT;
 			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
 			hpa_t hpa = (hpa_t)pfn << PAGE_SHIFT;
@@ -3290,11 +3290,15 @@ static void audit_mappings(struct kvm_vcpu *vcpu)
 
 static int count_rmaps(struct kvm_vcpu *vcpu)
 {
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_memslots *slots;
 	int nmaps = 0;
-	int i, j, k;
+	int i, j, k, idx;
 
+	idx = srcu_read_lock(&kvm->srcu);
+	slots = kvm_memslots(kvm);
 	for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
-		struct kvm_memory_slot *m = &vcpu->kvm->memslots[i];
+		struct kvm_memory_slot *m = &slots->memslots[i];
 		struct kvm_rmap_desc *d;
 
 		for (j = 0; j < m->npages; ++j) {
@@ -3317,10 +3321,11 @@ static int count_rmaps(struct kvm_vcpu *vcpu)
 			}
 		}
 	}
+	srcu_read_unlock(&kvm->srcu, idx);
 	return nmaps;
 }
 
-void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
+void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 {
 	unsigned long *rmapp;
 	struct kvm_mmu_page *rev_sp;
@@ -3336,14 +3341,14 @@ void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
 			printk(KERN_ERR "%s: no memslot for gfn %ld\n",
 					 audit_msg, gfn);
 			printk(KERN_ERR "%s: index %ld of sp (gfn=%lx)\n",
-					audit_msg, sptep - rev_sp->spt,
+			       audit_msg, (long int)(sptep - rev_sp->spt),
 					rev_sp->gfn);
 			dump_stack();
 			return;
 		}
 
 		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt],
-				    is_large_pte(*sptep));
+				    rev_sp->role.level);
 		if (!*rmapp) {
 			if (!printk_ratelimit())
 				return;
@@ -3378,7 +3383,7 @@ static void check_writable_mappings_rmap(struct kvm_vcpu *vcpu)
 				continue;
 			if (!(ent & PT_WRITABLE_MASK))
 				continue;
-			inspect_spte_has_rmap(vcpu->kvm, sp, &pt[i]);
+			inspect_spte_has_rmap(vcpu->kvm, &pt[i]);
 		}
 	}
 	return;
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 61a1b38..be66759 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -2,6 +2,7 @@
 #define __KVM_X86_MMU_H
 
 #include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
 
 #define PT64_PT_BITS 9
 #define PT64_ENT_PER_PAGE (1 << PT64_PT_BITS)
@@ -37,6 +38,16 @@
 #define PT32_ROOT_LEVEL 2
 #define PT32E_ROOT_LEVEL 3
 
+#define PT_PDPE_LEVEL 3
+#define PT_DIRECTORY_LEVEL 2
+#define PT_PAGE_TABLE_LEVEL 1
+
+#define PFERR_PRESENT_MASK (1U << 0)
+#define PFERR_WRITE_MASK (1U << 1)
+#define PFERR_USER_MASK (1U << 2)
+#define PFERR_RSVD_MASK (1U << 3)
+#define PFERR_FETCH_MASK (1U << 4)
+
 int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]);
 
 static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
@@ -53,30 +64,6 @@ static inline int kvm_mmu_reload(struct kvm_vcpu *vcpu)
 	return kvm_mmu_load(vcpu);
 }
 
-static inline int is_long_mode(struct kvm_vcpu *vcpu)
-{
-#ifdef CONFIG_X86_64
-	return vcpu->arch.shadow_efer & EFER_LMA;
-#else
-	return 0;
-#endif
-}
-
-static inline int is_pae(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.cr4 & X86_CR4_PAE;
-}
-
-static inline int is_pse(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.cr4 & X86_CR4_PSE;
-}
-
-static inline int is_paging(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.cr0 & X86_CR0_PG;
-}
-
 static inline int is_present_gpte(unsigned long pte)
 {
 	return pte & PT_PRESENT_MASK;
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 3e4a5c6..42f07b1 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -6,14 +6,12 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvmmmu
-#define TRACE_INCLUDE_PATH .
-#define TRACE_INCLUDE_FILE mmutrace
 
 #define KVM_MMU_PAGE_FIELDS \
 	__field(__u64, gfn) \
 	__field(__u32, role) \
 	__field(__u32, root_count) \
-	__field(__u32, unsync)
+	__field(bool, unsync)
 
 #define KVM_MMU_PAGE_ASSIGN(sp)			     \
 	__entry->gfn = sp->gfn;			     \
@@ -30,14 +28,14 @@
 								        \
 	role.word = __entry->role;					\
 									\
-	trace_seq_printf(p, "sp gfn %llx %u/%u q%u%s %s%s %spge"	\
+	trace_seq_printf(p, "sp gfn %llx %u%s q%u%s %s%s"		\
 			 " %snxe root %u %s%c",				\
-			 __entry->gfn, role.level, role.glevels,	\
+			 __entry->gfn, role.level,			\
+			 role.cr4_pae ? " pae" : "",			\
 			 role.quadrant,					\
 			 role.direct ? " direct" : "",			\
 			 access_str[role.access],			\
 			 role.invalid ? " invalid" : "",		\
-			 role.cr4_pge ? "" : "!",			\
 			 role.nxe ? "" : "!",				\
 			 __entry->root_count,				\
 			 __entry->unsync ? "unsync" : "sync", 0);	\
@@ -94,15 +92,15 @@ TRACE_EVENT(
 	TP_printk("pte %llx level %u", __entry->pte, __entry->level)
 );
 
-/* We set a pte accessed bit */
-TRACE_EVENT(
-	kvm_mmu_set_accessed_bit,
+DECLARE_EVENT_CLASS(kvm_mmu_set_bit_class,
+
 	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+
 	TP_ARGS(table_gfn, index, size),
 
 	TP_STRUCT__entry(
 		__field(__u64, gpa)
-		),
+	),
 
 	TP_fast_assign(
 		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
@@ -112,22 +110,20 @@ TRACE_EVENT(
 	TP_printk("gpa %llx", __entry->gpa)
 );
 
-/* We set a pte dirty bit */
-TRACE_EVENT(
-	kvm_mmu_set_dirty_bit,
+/* We set a pte accessed bit */
+DEFINE_EVENT(kvm_mmu_set_bit_class, kvm_mmu_set_accessed_bit,
+
 	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
-	TP_ARGS(table_gfn, index, size),
 
-	TP_STRUCT__entry(
-		__field(__u64, gpa)
-		),
+	TP_ARGS(table_gfn, index, size)
+);
 
-	TP_fast_assign(
-		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
-				+ index * size;
-		),
+/* We set a pte dirty bit */
+DEFINE_EVENT(kvm_mmu_set_bit_class, kvm_mmu_set_dirty_bit,
 
-	TP_printk("gpa %llx", __entry->gpa)
+	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+
+	TP_ARGS(table_gfn, index, size)
 );
 
 TRACE_EVENT(
@@ -166,55 +162,45 @@ TRACE_EVENT(
 		  __entry->created ? "new" : "existing")
 );
 
-TRACE_EVENT(
-	kvm_mmu_sync_page,
+DECLARE_EVENT_CLASS(kvm_mmu_page_class,
+
 	TP_PROTO(struct kvm_mmu_page *sp),
 	TP_ARGS(sp),
 
 	TP_STRUCT__entry(
 		KVM_MMU_PAGE_FIELDS
-		),
+	),
 
 	TP_fast_assign(
 		KVM_MMU_PAGE_ASSIGN(sp)
-		),
+	),
 
 	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
 );
 
-TRACE_EVENT(
-	kvm_mmu_unsync_page,
+DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_sync_page,
 	TP_PROTO(struct kvm_mmu_page *sp),
-	TP_ARGS(sp),
-
-	TP_STRUCT__entry(
-		KVM_MMU_PAGE_FIELDS
-		),
 
-	TP_fast_assign(
-		KVM_MMU_PAGE_ASSIGN(sp)
-		),
-
-	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+	TP_ARGS(sp)
 );
 
-TRACE_EVENT(
-	kvm_mmu_zap_page,
+DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_unsync_page,
 	TP_PROTO(struct kvm_mmu_page *sp),
-	TP_ARGS(sp),
 
-	TP_STRUCT__entry(
-		KVM_MMU_PAGE_FIELDS
-		),
+	TP_ARGS(sp)
+);
 
-	TP_fast_assign(
-		KVM_MMU_PAGE_ASSIGN(sp)
-		),
+DEFINE_EVENT(kvm_mmu_page_class, kvm_mmu_zap_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
 
-	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+	TP_ARGS(sp)
 );
-
 #endif /* _TRACE_KVMMMU_H */
 
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE mmutrace
+
 /* This part must be outside protection */
 #include <trace/define_trace.h>
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index ede2131..2331bdc 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -162,7 +162,7 @@ walk:
 		if (rsvd_fault)
 			goto access_error;
 
-		if (write_fault && !is_writeble_pte(pte))
+		if (write_fault && !is_writable_pte(pte))
 			if (user_fault || is_write_protection(vcpu))
 				goto access_error;
 
@@ -170,7 +170,7 @@ walk:
 			goto access_error;
 
 #if PTTYPE == 64
-		if (fetch_fault && is_nx(vcpu) && (pte & PT64_NX_MASK))
+		if (fetch_fault && (pte & PT64_NX_MASK))
 			goto access_error;
 #endif
 
@@ -190,10 +190,10 @@ walk:
 
 		if ((walker->level == PT_PAGE_TABLE_LEVEL) ||
 		    ((walker->level == PT_DIRECTORY_LEVEL) &&
-				(pte & PT_PAGE_SIZE_MASK)  &&
+				is_large_pte(pte) &&
 				(PTTYPE == 64 || is_pse(vcpu))) ||
 		    ((walker->level == PT_PDPE_LEVEL) &&
-				(pte & PT_PAGE_SIZE_MASK)  &&
+				is_large_pte(pte) &&
 				is_long_mode(vcpu))) {
 			int lvl = walker->level;
 
@@ -258,11 +258,17 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pt_element_t gpte;
 	unsigned pte_access;
 	pfn_t pfn;
+	u64 new_spte;
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
-		if (!is_present_gpte(gpte))
-			__set_spte(spte, shadow_notrap_nonpresent_pte);
+		if (!is_present_gpte(gpte)) {
+			if (page->unsync)
+				new_spte = shadow_trap_nonpresent_pte;
+			else
+				new_spte = shadow_notrap_nonpresent_pte;
+			__set_spte(spte, new_spte);
+		}
 		return;
 	}
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
@@ -336,6 +342,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			/* advance table_gfn when emulating 1gb pages with 4k */
 			if (delta == 0)
 				table_gfn += PT_INDEX(addr, level);
+			access &= gw->pte_access;
 		} else {
 			direct = 0;
 			table_gfn = gw->table_gfn[level - 2];
@@ -457,6 +464,7 @@ out_unlock:
 static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 {
 	struct kvm_shadow_walk_iterator iterator;
+	gpa_t pte_gpa = -1;
 	int level;
 	u64 *sptep;
 	int need_flush = 0;
@@ -467,9 +475,16 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 		level = iterator.level;
 		sptep = iterator.sptep;
 
-		if (level == PT_PAGE_TABLE_LEVEL  ||
-		    ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
-		    ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
+		if (is_last_spte(*sptep, level)) {
+			struct kvm_mmu_page *sp = page_header(__pa(sptep));
+			int offset, shift;
+
+			shift = PAGE_SHIFT -
+				  (PT_LEVEL_BITS - PT64_LEVEL_BITS) * level;
+			offset = sp->role.quadrant << shift;
+
+			pte_gpa = (sp->gfn << PAGE_SHIFT) + offset;
+			pte_gpa += (sptep - sp->spt) * sizeof(pt_element_t);
 
 			if (is_shadow_present_pte(*sptep)) {
 				rmap_remove(vcpu->kvm, sptep);
@@ -487,21 +502,36 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 
 	if (need_flush)
 		kvm_flush_remote_tlbs(vcpu->kvm);
+
+	atomic_inc(&vcpu->kvm->arch.invlpg_counter);
+
 	spin_unlock(&vcpu->kvm->mmu_lock);
+
+	if (pte_gpa == -1)
+		return;
+
+	if (mmu_topup_memory_caches(vcpu))
+		return;
+	kvm_mmu_pte_write(vcpu, pte_gpa, NULL, sizeof(pt_element_t), 0);
 }
 
-static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
+static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr, u32 access,
+			       u32 *error)
 {
 	struct guest_walker walker;
 	gpa_t gpa = UNMAPPED_GVA;
 	int r;
 
-	r = FNAME(walk_addr)(&walker, vcpu, vaddr, 0, 0, 0);
+	r = FNAME(walk_addr)(&walker, vcpu, vaddr,
+			     !!(access & PFERR_WRITE_MASK),
+			     !!(access & PFERR_USER_MASK),
+			     !!(access & PFERR_FETCH_MASK));
 
 	if (r) {
 		gpa = gfn_to_gpa(walker.gfn);
 		gpa |= vaddr & ~PAGE_MASK;
-	}
+	} else if (error)
+		*error = walker.error_code;
 
 	return gpa;
 }
@@ -546,12 +576,15 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
 	int i, offset, nr_present;
 	bool reset_host_protection;
+	gpa_t first_pte_gpa;
 
 	offset = nr_present = 0;
 
 	if (PTTYPE == 32)
 		offset = sp->role.quadrant << PT64_LEVEL_BITS;
 
+	first_pte_gpa = gfn_to_gpa(sp->gfn) + offset * sizeof(pt_element_t);
+
 	for (i = 0; i < PT64_ENT_PER_PAGE; i++) {
 		unsigned pte_access;
 		pt_element_t gpte;
@@ -561,8 +594,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		if (!is_shadow_present_pte(sp->spt[i]))
 			continue;
 
-		pte_gpa = gfn_to_gpa(sp->gfn);
-		pte_gpa += (i+offset) * sizeof(pt_element_t);
+		pte_gpa = first_pte_gpa + i * sizeof(pt_element_t);
 
 		if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
 					  sizeof(pt_element_t)))
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1d9b338..ce438e0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -26,7 +26,9 @@
 #include <linux/highmem.h>
 #include <linux/sched.h>
 #include <linux/ftrace_event.h>
+#include <linux/slab.h>
 
+#include <asm/tlbflush.h>
 #include <asm/desc.h>
 
 #include <asm/virtext.h>
@@ -43,10 +45,11 @@ MODULE_LICENSE("GPL");
 #define SEG_TYPE_LDT 2
 #define SEG_TYPE_BUSY_TSS16 3
 
-#define SVM_FEATURE_NPT  (1 << 0)
-#define SVM_FEATURE_LBRV (1 << 1)
-#define SVM_FEATURE_SVML (1 << 2)
-#define SVM_FEATURE_PAUSE_FILTER (1 << 10)
+#define SVM_FEATURE_NPT            (1 <<  0)
+#define SVM_FEATURE_LBRV           (1 <<  1)
+#define SVM_FEATURE_SVML           (1 <<  2)
+#define SVM_FEATURE_NRIP           (1 <<  3)
+#define SVM_FEATURE_PAUSE_FILTER   (1 << 10)
 
 #define NESTED_EXIT_HOST	0	/* Exit handled on host level */
 #define NESTED_EXIT_DONE	1	/* Exit caused nested vmexit  */
@@ -54,6 +57,8 @@ MODULE_LICENSE("GPL");
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
+static bool erratum_383_found __read_mostly;
+
 static const u32 host_save_user_msrs[] = {
 #ifdef CONFIG_X86_64
 	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -69,6 +74,7 @@ struct kvm_vcpu;
 struct nested_state {
 	struct vmcb *hsave;
 	u64 hsave_msr;
+	u64 vm_cr_msr;
 	u64 vmcb;
 
 	/* These are the merged vectors */
@@ -76,6 +82,7 @@ struct nested_state {
 
 	/* gpa pointers to the real vectors */
 	u64 vmcb_msrpm;
+	u64 vmcb_iopm;
 
 	/* A VMEXIT is required but not yet emulated */
 	bool exit_required;
@@ -90,6 +97,9 @@ struct nested_state {
 
 };
 
+#define MSRPM_OFFSETS	16
+static u32 msrpm_offsets[MSRPM_OFFSETS] __read_mostly;
+
 struct vcpu_svm {
 	struct kvm_vcpu vcpu;
 	struct vmcb *vmcb;
@@ -109,13 +119,39 @@ struct vcpu_svm {
 	struct nested_state nested;
 
 	bool nmi_singlestep;
+
+	unsigned int3_injected;
+	unsigned long int3_rip;
+};
+
+#define MSR_INVALID			0xffffffffU
+
+static struct svm_direct_access_msrs {
+	u32 index;   /* Index of the MSR */
+	bool always; /* True if intercept is always on */
+} direct_access_msrs[] = {
+	{ .index = MSR_K6_STAR,				.always = true  },
+	{ .index = MSR_IA32_SYSENTER_CS,		.always = true  },
+#ifdef CONFIG_X86_64
+	{ .index = MSR_GS_BASE,				.always = true  },
+	{ .index = MSR_FS_BASE,				.always = true  },
+	{ .index = MSR_KERNEL_GS_BASE,			.always = true  },
+	{ .index = MSR_LSTAR,				.always = true  },
+	{ .index = MSR_CSTAR,				.always = true  },
+	{ .index = MSR_SYSCALL_MASK,			.always = true  },
+#endif
+	{ .index = MSR_IA32_LASTBRANCHFROMIP,		.always = false },
+	{ .index = MSR_IA32_LASTBRANCHTOIP,		.always = false },
+	{ .index = MSR_IA32_LASTINTFROMIP,		.always = false },
+	{ .index = MSR_IA32_LASTINTTOIP,		.always = false },
+	{ .index = MSR_INVALID,				.always = false },
 };
 
 /* enable NPT for AMD64 and X86 with PAE */
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static bool npt_enabled = true;
 #else
-static bool npt_enabled = false;
+static bool npt_enabled;
 #endif
 static int npt = 1;
 
@@ -128,6 +164,7 @@ static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 static void svm_complete_interrupts(struct vcpu_svm *svm);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm);
+static int nested_svm_intercept(struct vcpu_svm *svm);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
@@ -162,8 +199,8 @@ static unsigned long iopm_base;
 struct kvm_ldttss_desc {
 	u16 limit0;
 	u16 base0;
-	unsigned base1 : 8, type : 5, dpl : 2, p : 1;
-	unsigned limit1 : 4, zero0 : 3, g : 1, base2 : 8;
+	unsigned base1:8, type:5, dpl:2, p:1;
+	unsigned limit1:4, zero0:3, g:1, base2:8;
 	u32 base3;
 	u32 zero1;
 } __attribute__((packed));
@@ -193,6 +230,27 @@ static u32 msrpm_ranges[] = {0, 0xc0000000, 0xc0010000};
 #define MSRS_RANGE_SIZE 2048
 #define MSRS_IN_RANGE (MSRS_RANGE_SIZE * 8 / 2)
 
+static u32 svm_msrpm_offset(u32 msr)
+{
+	u32 offset;
+	int i;
+
+	for (i = 0; i < NUM_MSR_MAPS; i++) {
+		if (msr < msrpm_ranges[i] ||
+		    msr >= msrpm_ranges[i] + MSRS_IN_RANGE)
+			continue;
+
+		offset  = (msr - msrpm_ranges[i]) / 4; /* 4 msrs per u8 */
+		offset += (i * MSRS_RANGE_SIZE);       /* add range offset */
+
+		/* Now we have the u8 offset - but need the u32 offset */
+		return offset / 4;
+	}
+
+	/* MSR not in any range */
+	return MSR_INVALID;
+}
+
 #define MAX_INST_SIZE 15
 
 static inline u32 svm_has(u32 feat)
@@ -212,7 +270,7 @@ static inline void stgi(void)
 
 static inline void invlpga(unsigned long addr, u32 asid)
 {
-	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
+	asm volatile (__ex(SVM_INVLPGA) : : "a"(addr), "c"(asid));
 }
 
 static inline void force_new_asid(struct kvm_vcpu *vcpu)
@@ -231,24 +289,7 @@ static void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 		efer &= ~EFER_LME;
 
 	to_svm(vcpu)->vmcb->save.efer = efer | EFER_SVME;
-	vcpu->arch.shadow_efer = efer;
-}
-
-static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
-				bool has_error_code, u32 error_code)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	/* If we are within a nested VM we'd better #VMEXIT and let the
-	   guest handle the exception */
-	if (nested_svm_check_exception(svm, nr, has_error_code, error_code))
-		return;
-
-	svm->vmcb->control.event_inj = nr
-		| SVM_EVTINJ_VALID
-		| (has_error_code ? SVM_EVTINJ_VALID_ERR : 0)
-		| SVM_EVTINJ_TYPE_EXEPT;
-	svm->vmcb->control.event_inj_err = error_code;
+	vcpu->arch.efer = efer;
 }
 
 static int is_external_interrupt(u32 info)
@@ -263,7 +304,7 @@ static u32 svm_get_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 	u32 ret = 0;
 
 	if (svm->vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK)
-		ret |= X86_SHADOW_INT_STI | X86_SHADOW_INT_MOV_SS;
+		ret |= KVM_X86_SHADOW_INT_STI | KVM_X86_SHADOW_INT_MOV_SS;
 	return ret & mask;
 }
 
@@ -282,6 +323,9 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	if (svm->vmcb->control.next_rip != 0)
+		svm->next_rip = svm->vmcb->control.next_rip;
+
 	if (!svm->next_rip) {
 		if (emulate_instruction(vcpu, 0, 0, EMULTYPE_SKIP) !=
 				EMULATE_DONE)
@@ -296,6 +340,68 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	svm_set_interrupt_shadow(vcpu, 0);
 }
 
+static void svm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
+				bool has_error_code, u32 error_code,
+				bool reinject)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	/*
+	 * If we are within a nested VM we'd better #VMEXIT and let the guest
+	 * handle the exception
+	 */
+	if (!reinject &&
+	    nested_svm_check_exception(svm, nr, has_error_code, error_code))
+		return;
+
+	if (nr == BP_VECTOR && !svm_has(SVM_FEATURE_NRIP)) {
+		unsigned long rip, old_rip = kvm_rip_read(&svm->vcpu);
+
+		/*
+		 * For guest debugging where we have to reinject #BP if some
+		 * INT3 is guest-owned:
+		 * Emulate nRIP by moving RIP forward. Will fail if injection
+		 * raises a fault that is not intercepted. Still better than
+		 * failing in all cases.
+		 */
+		skip_emulated_instruction(&svm->vcpu);
+		rip = kvm_rip_read(&svm->vcpu);
+		svm->int3_rip = rip + svm->vmcb->save.cs.base;
+		svm->int3_injected = rip - old_rip;
+	}
+
+	svm->vmcb->control.event_inj = nr
+		| SVM_EVTINJ_VALID
+		| (has_error_code ? SVM_EVTINJ_VALID_ERR : 0)
+		| SVM_EVTINJ_TYPE_EXEPT;
+	svm->vmcb->control.event_inj_err = error_code;
+}
+
+static void svm_init_erratum_383(void)
+{
+	u32 low, high;
+	int err;
+	u64 val;
+
+	/* Only Fam10h is affected */
+	if (boot_cpu_data.x86 != 0x10)
+		return;
+
+	/* Use _safe variants to not break nested virtualization */
+	val = native_read_msr_safe(MSR_AMD64_DC_CFG, &err);
+	if (err)
+		return;
+
+	val |= (1ULL << 47);
+
+	low  = lower_32_bits(val);
+	high = upper_32_bits(val);
+
+	native_write_msr_safe(MSR_AMD64_DC_CFG, low, high);
+
+	erratum_383_found = true;
+}
+
 static int has_svm(void)
 {
 	const char *msg;
@@ -318,7 +424,7 @@ static int svm_hardware_enable(void *garbage)
 
 	struct svm_cpu_data *sd;
 	uint64_t efer;
-	struct descriptor_table gdt_descr;
+	struct desc_ptr gdt_descr;
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
 
@@ -343,14 +449,16 @@ static int svm_hardware_enable(void *garbage)
 	sd->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1;
 	sd->next_asid = sd->max_asid + 1;
 
-	kvm_get_gdt(&gdt_descr);
-	gdt = (struct desc_struct *)gdt_descr.base;
+	native_store_gdt(&gdt_descr);
+	gdt = (struct desc_struct *)gdt_descr.address;
 	sd->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
 	wrmsrl(MSR_EFER, efer | EFER_SVME);
 
 	wrmsrl(MSR_VM_HSAVE_PA, page_to_pfn(sd->save_area) << PAGE_SHIFT);
 
+	svm_init_erratum_383();
+
 	return 0;
 }
 
@@ -390,42 +498,98 @@ err_1:
 
 }
 
+static bool valid_msr_intercept(u32 index)
+{
+	int i;
+
+	for (i = 0; direct_access_msrs[i].index != MSR_INVALID; i++)
+		if (direct_access_msrs[i].index == index)
+			return true;
+
+	return false;
+}
+
 static void set_msr_interception(u32 *msrpm, unsigned msr,
 				 int read, int write)
 {
+	u8 bit_read, bit_write;
+	unsigned long tmp;
+	u32 offset;
+
+	/*
+	 * If this warning triggers extend the direct_access_msrs list at the
+	 * beginning of the file
+	 */
+	WARN_ON(!valid_msr_intercept(msr));
+
+	offset    = svm_msrpm_offset(msr);
+	bit_read  = 2 * (msr & 0x0f);
+	bit_write = 2 * (msr & 0x0f) + 1;
+	tmp       = msrpm[offset];
+
+	BUG_ON(offset == MSR_INVALID);
+
+	read  ? clear_bit(bit_read,  &tmp) : set_bit(bit_read,  &tmp);
+	write ? clear_bit(bit_write, &tmp) : set_bit(bit_write, &tmp);
+
+	msrpm[offset] = tmp;
+}
+
+static void svm_vcpu_init_msrpm(u32 *msrpm)
+{
 	int i;
 
-	for (i = 0; i < NUM_MSR_MAPS; i++) {
-		if (msr >= msrpm_ranges[i] &&
-		    msr < msrpm_ranges[i] + MSRS_IN_RANGE) {
-			u32 msr_offset = (i * MSRS_IN_RANGE + msr -
-					  msrpm_ranges[i]) * 2;
-
-			u32 *base = msrpm + (msr_offset / 32);
-			u32 msr_shift = msr_offset % 32;
-			u32 mask = ((write) ? 0 : 2) | ((read) ? 0 : 1);
-			*base = (*base & ~(0x3 << msr_shift)) |
-				(mask << msr_shift);
+	memset(msrpm, 0xff, PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER));
+
+	for (i = 0; direct_access_msrs[i].index != MSR_INVALID; i++) {
+		if (!direct_access_msrs[i].always)
+			continue;
+
+		set_msr_interception(msrpm, direct_access_msrs[i].index, 1, 1);
+	}
+}
+
+static void add_msr_offset(u32 offset)
+{
+	int i;
+
+	for (i = 0; i < MSRPM_OFFSETS; ++i) {
+
+		/* Offset already in list? */
+		if (msrpm_offsets[i] == offset)
 			return;
-		}
+
+		/* Slot used by another offset? */
+		if (msrpm_offsets[i] != MSR_INVALID)
+			continue;
+
+		/* Add offset to list */
+		msrpm_offsets[i] = offset;
+
+		return;
 	}
+
+	/*
+	 * If this BUG triggers the msrpm_offsets table has an overflow. Just
+	 * increase MSRPM_OFFSETS in this case.
+	 */
 	BUG();
 }
 
-static void svm_vcpu_init_msrpm(u32 *msrpm)
+static void init_msrpm_offsets(void)
 {
-	memset(msrpm, 0xff, PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER));
+	int i;
 
-#ifdef CONFIG_X86_64
-	set_msr_interception(msrpm, MSR_GS_BASE, 1, 1);
-	set_msr_interception(msrpm, MSR_FS_BASE, 1, 1);
-	set_msr_interception(msrpm, MSR_KERNEL_GS_BASE, 1, 1);
-	set_msr_interception(msrpm, MSR_LSTAR, 1, 1);
-	set_msr_interception(msrpm, MSR_CSTAR, 1, 1);
-	set_msr_interception(msrpm, MSR_SYSCALL_MASK, 1, 1);
-#endif
-	set_msr_interception(msrpm, MSR_K6_STAR, 1, 1);
-	set_msr_interception(msrpm, MSR_IA32_SYSENTER_CS, 1, 1);
+	memset(msrpm_offsets, 0xff, sizeof(msrpm_offsets));
+
+	for (i = 0; direct_access_msrs[i].index != MSR_INVALID; i++) {
+		u32 offset;
+
+		offset = svm_msrpm_offset(direct_access_msrs[i].index);
+		BUG_ON(offset == MSR_INVALID);
+
+		add_msr_offset(offset);
+	}
 }
 
 static void svm_enable_lbrv(struct vcpu_svm *svm)
@@ -466,6 +630,8 @@ static __init int svm_hardware_setup(void)
 	memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
 	iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
 
+	init_msrpm_offsets();
+
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
@@ -522,7 +688,7 @@ static void init_seg(struct vmcb_seg *seg)
 {
 	seg->selector = 0;
 	seg->attrib = SVM_SELECTOR_P_MASK | SVM_SELECTOR_S_MASK |
-		SVM_SELECTOR_WRITE_MASK; /* Read/Write Data Segment */
+		      SVM_SELECTOR_WRITE_MASK; /* Read/Write Data Segment */
 	seg->limit = 0xffff;
 	seg->base = 0;
 }
@@ -540,25 +706,33 @@ static void init_vmcb(struct vcpu_svm *svm)
 	struct vmcb_control_area *control = &svm->vmcb->control;
 	struct vmcb_save_area *save = &svm->vmcb->save;
 
-	control->intercept_cr_read = 	INTERCEPT_CR0_MASK |
+	svm->vcpu.fpu_active = 1;
+
+	control->intercept_cr_read =	INTERCEPT_CR0_MASK |
 					INTERCEPT_CR3_MASK |
 					INTERCEPT_CR4_MASK;
 
-	control->intercept_cr_write = 	INTERCEPT_CR0_MASK |
+	control->intercept_cr_write =	INTERCEPT_CR0_MASK |
 					INTERCEPT_CR3_MASK |
 					INTERCEPT_CR4_MASK |
 					INTERCEPT_CR8_MASK;
 
-	control->intercept_dr_read = 	INTERCEPT_DR0_MASK |
+	control->intercept_dr_read =	INTERCEPT_DR0_MASK |
 					INTERCEPT_DR1_MASK |
 					INTERCEPT_DR2_MASK |
-					INTERCEPT_DR3_MASK;
+					INTERCEPT_DR3_MASK |
+					INTERCEPT_DR4_MASK |
+					INTERCEPT_DR5_MASK |
+					INTERCEPT_DR6_MASK |
+					INTERCEPT_DR7_MASK;
 
-	control->intercept_dr_write = 	INTERCEPT_DR0_MASK |
+	control->intercept_dr_write =	INTERCEPT_DR0_MASK |
 					INTERCEPT_DR1_MASK |
 					INTERCEPT_DR2_MASK |
 					INTERCEPT_DR3_MASK |
+					INTERCEPT_DR4_MASK |
 					INTERCEPT_DR5_MASK |
+					INTERCEPT_DR6_MASK |
 					INTERCEPT_DR7_MASK;
 
 	control->intercept_exceptions = (1 << PF_VECTOR) |
@@ -566,9 +740,10 @@ static void init_vmcb(struct vcpu_svm *svm)
 					(1 << MC_VECTOR);
 
 
-	control->intercept = 	(1ULL << INTERCEPT_INTR) |
+	control->intercept =	(1ULL << INTERCEPT_INTR) |
 				(1ULL << INTERCEPT_NMI) |
 				(1ULL << INTERCEPT_SMI) |
+				(1ULL << INTERCEPT_SELECTIVE_CR0) |
 				(1ULL << INTERCEPT_CPUID) |
 				(1ULL << INTERCEPT_INVD) |
 				(1ULL << INTERCEPT_HLT) |
@@ -626,7 +801,8 @@ static void init_vmcb(struct vcpu_svm *svm)
 	save->rip = 0x0000fff0;
 	svm->vcpu.arch.regs[VCPU_REGS_RIP] = save->rip;
 
-	/* This is the guest-visible cr0 value.
+	/*
+	 * This is the guest-visible cr0 value.
 	 * svm_set_cr0() sets PG and WP and clears NW and CD on save->cr0.
 	 */
 	svm->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
@@ -641,10 +817,8 @@ static void init_vmcb(struct vcpu_svm *svm)
 		control->intercept &= ~((1ULL << INTERCEPT_TASK_SWITCH) |
 					(1ULL << INTERCEPT_INVLPG));
 		control->intercept_exceptions &= ~(1 << PF_VECTOR);
-		control->intercept_cr_read &= ~(INTERCEPT_CR0_MASK|
-						INTERCEPT_CR3_MASK);
-		control->intercept_cr_write &= ~(INTERCEPT_CR0_MASK|
-						 INTERCEPT_CR3_MASK);
+		control->intercept_cr_read &= ~INTERCEPT_CR3_MASK;
+		control->intercept_cr_write &= ~INTERCEPT_CR3_MASK;
 		save->g_pat = 0x0007040600070406ULL;
 		save->cr3 = 0;
 		save->cr4 = 0;
@@ -698,30 +872,30 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	if (err)
 		goto free_svm;
 
+	err = -ENOMEM;
 	page = alloc_page(GFP_KERNEL);
-	if (!page) {
-		err = -ENOMEM;
+	if (!page)
 		goto uninit;
-	}
 
-	err = -ENOMEM;
 	msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
 	if (!msrpm_pages)
-		goto uninit;
+		goto free_page1;
 
 	nested_msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
 	if (!nested_msrpm_pages)
-		goto uninit;
-
-	svm->msrpm = page_address(msrpm_pages);
-	svm_vcpu_init_msrpm(svm->msrpm);
+		goto free_page2;
 
 	hsave_page = alloc_page(GFP_KERNEL);
 	if (!hsave_page)
-		goto uninit;
+		goto free_page3;
+
 	svm->nested.hsave = page_address(hsave_page);
 
+	svm->msrpm = page_address(msrpm_pages);
+	svm_vcpu_init_msrpm(svm->msrpm);
+
 	svm->nested.msrpm = page_address(nested_msrpm_pages);
+	svm_vcpu_init_msrpm(svm->nested.msrpm);
 
 	svm->vmcb = page_address(page);
 	clear_page(svm->vmcb);
@@ -730,13 +904,18 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	init_vmcb(svm);
 
 	fx_init(&svm->vcpu);
-	svm->vcpu.fpu_active = 1;
 	svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
 	if (kvm_vcpu_is_bsp(&svm->vcpu))
 		svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
 
 	return &svm->vcpu;
 
+free_page3:
+	__free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page2:
+	__free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page1:
+	__free_page(page);
 uninit:
 	kvm_vcpu_uninit(&svm->vcpu);
 free_svm:
@@ -765,14 +944,16 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	if (unlikely(cpu != vcpu->cpu)) {
 		u64 delta;
 
-		/*
-		 * Make sure that the guest sees a monotonically
-		 * increasing TSC.
-		 */
-		delta = vcpu->arch.host_tsc - native_read_tsc();
-		svm->vmcb->control.tsc_offset += delta;
-		if (is_nested(svm))
-			svm->nested.hsave->control.tsc_offset += delta;
+		if (check_tsc_unstable()) {
+			/*
+			 * Make sure that the guest sees a monotonically
+			 * increasing TSC.
+			 */
+			delta = vcpu->arch.host_tsc - native_read_tsc();
+			svm->vmcb->control.tsc_offset += delta;
+			if (is_nested(svm))
+				svm->nested.hsave->control.tsc_offset += delta;
+		}
 		vcpu->cpu = cpu;
 		kvm_migrate_timers(vcpu);
 		svm->asid_generation = 0;
@@ -868,7 +1049,8 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 	var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
 	var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
 
-	/* AMD's VMCB does not have an explicit unusable field, so emulate it
+	/*
+	 * AMD's VMCB does not have an explicit unusable field, so emulate it
 	 * for cross vendor migration purposes by "not present"
 	 */
 	var->unusable = !var->present || (var->type == 0);
@@ -904,7 +1086,8 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
 			var->type |= 0x1;
 		break;
 	case VCPU_SREG_SS:
-		/* On AMD CPUs sometimes the DB bit in the segment
+		/*
+		 * On AMD CPUs sometimes the DB bit in the segment
 		 * descriptor is left as 1, although the whole segment has
 		 * been made unusable. Clear it here to pass an Intel VMX
 		 * entry check when cross vendor migrating.
@@ -922,74 +1105,127 @@ static int svm_get_cpl(struct kvm_vcpu *vcpu)
 	return save->cpl;
 }
 
-static void svm_get_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void svm_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	dt->limit = svm->vmcb->save.idtr.limit;
-	dt->base = svm->vmcb->save.idtr.base;
+	dt->size = svm->vmcb->save.idtr.limit;
+	dt->address = svm->vmcb->save.idtr.base;
 }
 
-static void svm_set_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void svm_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	svm->vmcb->save.idtr.limit = dt->limit;
-	svm->vmcb->save.idtr.base = dt->base ;
+	svm->vmcb->save.idtr.limit = dt->size;
+	svm->vmcb->save.idtr.base = dt->address ;
 }
 
-static void svm_get_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void svm_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	dt->limit = svm->vmcb->save.gdtr.limit;
-	dt->base = svm->vmcb->save.gdtr.base;
+	dt->size = svm->vmcb->save.gdtr.limit;
+	dt->address = svm->vmcb->save.gdtr.base;
 }
 
-static void svm_set_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void svm_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	svm->vmcb->save.gdtr.limit = dt->limit;
-	svm->vmcb->save.gdtr.base = dt->base ;
+	svm->vmcb->save.gdtr.limit = dt->size;
+	svm->vmcb->save.gdtr.base = dt->address ;
+}
+
+static void svm_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
+{
 }
 
 static void svm_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 {
 }
 
+static void update_cr0_intercept(struct vcpu_svm *svm)
+{
+	struct vmcb *vmcb = svm->vmcb;
+	ulong gcr0 = svm->vcpu.arch.cr0;
+	u64 *hcr0 = &svm->vmcb->save.cr0;
+
+	if (!svm->vcpu.fpu_active)
+		*hcr0 |= SVM_CR0_SELECTIVE_MASK;
+	else
+		*hcr0 = (*hcr0 & ~SVM_CR0_SELECTIVE_MASK)
+			| (gcr0 & SVM_CR0_SELECTIVE_MASK);
+
+
+	if (gcr0 == *hcr0 && svm->vcpu.fpu_active) {
+		vmcb->control.intercept_cr_read &= ~INTERCEPT_CR0_MASK;
+		vmcb->control.intercept_cr_write &= ~INTERCEPT_CR0_MASK;
+		if (is_nested(svm)) {
+			struct vmcb *hsave = svm->nested.hsave;
+
+			hsave->control.intercept_cr_read  &= ~INTERCEPT_CR0_MASK;
+			hsave->control.intercept_cr_write &= ~INTERCEPT_CR0_MASK;
+			vmcb->control.intercept_cr_read  |= svm->nested.intercept_cr_read;
+			vmcb->control.intercept_cr_write |= svm->nested.intercept_cr_write;
+		}
+	} else {
+		svm->vmcb->control.intercept_cr_read |= INTERCEPT_CR0_MASK;
+		svm->vmcb->control.intercept_cr_write |= INTERCEPT_CR0_MASK;
+		if (is_nested(svm)) {
+			struct vmcb *hsave = svm->nested.hsave;
+
+			hsave->control.intercept_cr_read |= INTERCEPT_CR0_MASK;
+			hsave->control.intercept_cr_write |= INTERCEPT_CR0_MASK;
+		}
+	}
+}
+
 static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	if (is_nested(svm)) {
+		/*
+		 * We are here because we run in nested mode, the host kvm
+		 * intercepts cr0 writes but the l1 hypervisor does not.
+		 * But the L1 hypervisor may intercept selective cr0 writes.
+		 * This needs to be checked here.
+		 */
+		unsigned long old, new;
+
+		/* Remove bits that would trigger a real cr0 write intercept */
+		old = vcpu->arch.cr0 & SVM_CR0_SELECTIVE_MASK;
+		new = cr0 & SVM_CR0_SELECTIVE_MASK;
+
+		if (old == new) {
+			/* cr0 write with ts and mp unchanged */
+			svm->vmcb->control.exit_code = SVM_EXIT_CR0_SEL_WRITE;
+			if (nested_svm_exit_handled(svm) == NESTED_EXIT_DONE)
+				return;
+		}
+	}
+
 #ifdef CONFIG_X86_64
-	if (vcpu->arch.shadow_efer & EFER_LME) {
+	if (vcpu->arch.efer & EFER_LME) {
 		if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) {
-			vcpu->arch.shadow_efer |= EFER_LMA;
+			vcpu->arch.efer |= EFER_LMA;
 			svm->vmcb->save.efer |= EFER_LMA | EFER_LME;
 		}
 
 		if (is_paging(vcpu) && !(cr0 & X86_CR0_PG)) {
-			vcpu->arch.shadow_efer &= ~EFER_LMA;
+			vcpu->arch.efer &= ~EFER_LMA;
 			svm->vmcb->save.efer &= ~(EFER_LMA | EFER_LME);
 		}
 	}
 #endif
-	if (npt_enabled)
-		goto set;
+	vcpu->arch.cr0 = cr0;
 
-	if ((vcpu->arch.cr0 & X86_CR0_TS) && !(cr0 & X86_CR0_TS)) {
-		svm->vmcb->control.intercept_exceptions &= ~(1 << NM_VECTOR);
-		vcpu->fpu_active = 1;
-	}
+	if (!npt_enabled)
+		cr0 |= X86_CR0_PG | X86_CR0_WP;
 
-	vcpu->arch.cr0 = cr0;
-	cr0 |= X86_CR0_PG | X86_CR0_WP;
-	if (!vcpu->fpu_active) {
-		svm->vmcb->control.intercept_exceptions |= (1 << NM_VECTOR);
+	if (!vcpu->fpu_active)
 		cr0 |= X86_CR0_TS;
-	}
-set:
 	/*
 	 * re-enable caching here because the QEMU bios
 	 * does not do it - this results in some delay at
@@ -997,6 +1233,7 @@ set:
 	 */
 	cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
 	svm->vmcb->save.cr0 = cr0;
+	update_cr0_intercept(svm);
 }
 
 static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -1102,76 +1339,11 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd)
 	svm->vmcb->control.asid = sd->next_asid++;
 }
 
-static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
+static void svm_set_dr7(struct kvm_vcpu *vcpu, unsigned long value)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	unsigned long val;
 
-	switch (dr) {
-	case 0 ... 3:
-		val = vcpu->arch.db[dr];
-		break;
-	case 6:
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
-			val = vcpu->arch.dr6;
-		else
-			val = svm->vmcb->save.dr6;
-		break;
-	case 7:
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
-			val = vcpu->arch.dr7;
-		else
-			val = svm->vmcb->save.dr7;
-		break;
-	default:
-		val = 0;
-	}
-
-	return val;
-}
-
-static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
-		       int *exception)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	*exception = 0;
-
-	switch (dr) {
-	case 0 ... 3:
-		vcpu->arch.db[dr] = value;
-		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
-			vcpu->arch.eff_db[dr] = value;
-		return;
-	case 4 ... 5:
-		if (vcpu->arch.cr4 & X86_CR4_DE)
-			*exception = UD_VECTOR;
-		return;
-	case 6:
-		if (value & 0xffffffff00000000ULL) {
-			*exception = GP_VECTOR;
-			return;
-		}
-		vcpu->arch.dr6 = (value & DR6_VOLATILE) | DR6_FIXED_1;
-		return;
-	case 7:
-		if (value & 0xffffffff00000000ULL) {
-			*exception = GP_VECTOR;
-			return;
-		}
-		vcpu->arch.dr7 = (value & DR7_VOLATILE) | DR7_FIXED_1;
-		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
-			svm->vmcb->save.dr7 = vcpu->arch.dr7;
-			vcpu->arch.switch_db_regs = (value & DR7_BP_EN_MASK);
-		}
-		return;
-	default:
-		/* FIXME: Possible case? */
-		printk(KERN_DEBUG "%s: unexpected dr %u\n",
-		       __func__, dr);
-		*exception = UD_VECTOR;
-		return;
-	}
+	svm->vmcb->save.dr7 = value;
 }
 
 static int pf_interception(struct vcpu_svm *svm)
@@ -1208,7 +1380,7 @@ static int db_interception(struct vcpu_svm *svm)
 	}
 
 	if (svm->vcpu.guest_debug &
-	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)){
+	    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) {
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
 		kvm_run->debug.arch.pc =
 			svm->vmcb->save.cs.base + svm->vmcb->save.rip;
@@ -1239,18 +1411,88 @@ static int ud_interception(struct vcpu_svm *svm)
 	return 1;
 }
 
-static int nm_interception(struct vcpu_svm *svm)
+static void svm_fpu_activate(struct kvm_vcpu *vcpu)
 {
-	svm->vmcb->control.intercept_exceptions &= ~(1 << NM_VECTOR);
-	if (!(svm->vcpu.arch.cr0 & X86_CR0_TS))
-		svm->vmcb->save.cr0 &= ~X86_CR0_TS;
+	struct vcpu_svm *svm = to_svm(vcpu);
+	u32 excp;
+
+	if (is_nested(svm)) {
+		u32 h_excp, n_excp;
+
+		h_excp  = svm->nested.hsave->control.intercept_exceptions;
+		n_excp  = svm->nested.intercept_exceptions;
+		h_excp &= ~(1 << NM_VECTOR);
+		excp    = h_excp | n_excp;
+	} else {
+		excp  = svm->vmcb->control.intercept_exceptions;
+		excp &= ~(1 << NM_VECTOR);
+	}
+
+	svm->vmcb->control.intercept_exceptions = excp;
+
 	svm->vcpu.fpu_active = 1;
+	update_cr0_intercept(svm);
+}
 
+static int nm_interception(struct vcpu_svm *svm)
+{
+	svm_fpu_activate(&svm->vcpu);
 	return 1;
 }
 
-static int mc_interception(struct vcpu_svm *svm)
+static bool is_erratum_383(void)
 {
+	int err, i;
+	u64 value;
+
+	if (!erratum_383_found)
+		return false;
+
+	value = native_read_msr_safe(MSR_IA32_MC0_STATUS, &err);
+	if (err)
+		return false;
+
+	/* Bit 62 may or may not be set for this mce */
+	value &= ~(1ULL << 62);
+
+	if (value != 0xb600000000010015ULL)
+		return false;
+
+	/* Clear MCi_STATUS registers */
+	for (i = 0; i < 6; ++i)
+		native_write_msr_safe(MSR_IA32_MCx_STATUS(i), 0, 0);
+
+	value = native_read_msr_safe(MSR_IA32_MCG_STATUS, &err);
+	if (!err) {
+		u32 low, high;
+
+		value &= ~(1ULL << 2);
+		low    = lower_32_bits(value);
+		high   = upper_32_bits(value);
+
+		native_write_msr_safe(MSR_IA32_MCG_STATUS, low, high);
+	}
+
+	/* Flush tlb to evict multi-match entries */
+	__flush_tlb_all();
+
+	return true;
+}
+
+static void svm_handle_mce(struct vcpu_svm *svm)
+{
+	if (is_erratum_383()) {
+		/*
+		 * Erratum 383 triggered. Guest state is corrupt so kill the
+		 * guest.
+		 */
+		pr_err("KVM: Guest triggered AMD Erratum 383\n");
+
+		set_bit(KVM_REQ_TRIPLE_FAULT, &svm->vcpu.requests);
+
+		return;
+	}
+
 	/*
 	 * On an #MC intercept the MCE handler is not called automatically in
 	 * the host. So do it by hand here.
@@ -1259,6 +1501,11 @@ static int mc_interception(struct vcpu_svm *svm)
 		"int $0x12\n");
 	/* not sure if we ever come back to this point */
 
+	return;
+}
+
+static int mc_interception(struct vcpu_svm *svm)
+{
 	return 1;
 }
 
@@ -1279,29 +1526,23 @@ static int shutdown_interception(struct vcpu_svm *svm)
 
 static int io_interception(struct vcpu_svm *svm)
 {
+	struct kvm_vcpu *vcpu = &svm->vcpu;
 	u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
 	int size, in, string;
 	unsigned port;
 
 	++svm->vcpu.stat.io_exits;
-
-	svm->next_rip = svm->vmcb->control.exit_info_2;
-
 	string = (io_info & SVM_IOIO_STR_MASK) != 0;
-
-	if (string) {
-		if (emulate_instruction(&svm->vcpu,
-					0, 0, 0) == EMULATE_DO_MMIO)
-			return 0;
-		return 1;
-	}
-
 	in = (io_info & SVM_IOIO_TYPE_MASK) != 0;
+	if (string || in)
+		return !(emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO);
+
 	port = io_info >> 16;
 	size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
-
+	svm->next_rip = svm->vmcb->control.exit_info_2;
 	skip_emulated_instruction(&svm->vcpu);
-	return kvm_emulate_pio(&svm->vcpu, in, size, port);
+
+	return kvm_fast_pio_out(vcpu, size, port);
 }
 
 static int nmi_interception(struct vcpu_svm *svm)
@@ -1337,7 +1578,7 @@ static int vmmcall_interception(struct vcpu_svm *svm)
 
 static int nested_svm_check_permissions(struct vcpu_svm *svm)
 {
-	if (!(svm->vcpu.arch.shadow_efer & EFER_SVME)
+	if (!(svm->vcpu.arch.efer & EFER_SVME)
 	    || !is_paging(&svm->vcpu)) {
 		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 		return 1;
@@ -1354,6 +1595,8 @@ static int nested_svm_check_permissions(struct vcpu_svm *svm)
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code)
 {
+	int vmexit;
+
 	if (!is_nested(svm))
 		return 0;
 
@@ -1362,21 +1605,28 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 	svm->vmcb->control.exit_info_1 = error_code;
 	svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
 
-	return nested_svm_exit_handled(svm);
+	vmexit = nested_svm_intercept(svm);
+	if (vmexit == NESTED_EXIT_DONE)
+		svm->nested.exit_required = true;
+
+	return vmexit;
 }
 
-static inline int nested_svm_intr(struct vcpu_svm *svm)
+/* This function returns true if it is save to enable the irq window */
+static inline bool nested_svm_intr(struct vcpu_svm *svm)
 {
 	if (!is_nested(svm))
-		return 0;
+		return true;
 
 	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
-		return 0;
+		return true;
 
 	if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
-		return 0;
+		return false;
 
-	svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+	svm->vmcb->control.exit_code   = SVM_EXIT_INTR;
+	svm->vmcb->control.exit_info_1 = 0;
+	svm->vmcb->control.exit_info_2 = 0;
 
 	if (svm->nested.intercept & 1ULL) {
 		/*
@@ -1387,21 +1637,40 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 		 */
 		svm->nested.exit_required = true;
 		trace_kvm_nested_intr_vmexit(svm->vmcb->save.rip);
-		return 1;
+		return false;
 	}
 
-	return 0;
+	return true;
+}
+
+/* This function returns true if it is save to enable the nmi window */
+static inline bool nested_svm_nmi(struct vcpu_svm *svm)
+{
+	if (!is_nested(svm))
+		return true;
+
+	if (!(svm->nested.intercept & (1ULL << INTERCEPT_NMI)))
+		return true;
+
+	svm->vmcb->control.exit_code = SVM_EXIT_NMI;
+	svm->nested.exit_required = true;
+
+	return false;
 }
 
-static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, enum km_type idx)
+static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, struct page **_page)
 {
 	struct page *page;
 
+	might_sleep();
+
 	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
 	if (is_error_page(page))
 		goto error;
 
-	return kmap_atomic(page, idx);
+	*_page = page;
+
+	return kmap(page);
 
 error:
 	kvm_release_page_clean(page);
@@ -1410,61 +1679,55 @@ error:
 	return NULL;
 }
 
-static void nested_svm_unmap(void *addr, enum km_type idx)
+static void nested_svm_unmap(struct page *page)
 {
-	struct page *page;
+	kunmap(page);
+	kvm_release_page_dirty(page);
+}
 
-	if (!addr)
-		return;
+static int nested_svm_intercept_ioio(struct vcpu_svm *svm)
+{
+	unsigned port;
+	u8 val, bit;
+	u64 gpa;
 
-	page = kmap_atomic_to_page(addr);
+	if (!(svm->nested.intercept & (1ULL << INTERCEPT_IOIO_PROT)))
+		return NESTED_EXIT_HOST;
 
-	kunmap_atomic(addr, idx);
-	kvm_release_page_dirty(page);
+	port = svm->vmcb->control.exit_info_1 >> 16;
+	gpa  = svm->nested.vmcb_iopm + (port / 8);
+	bit  = port % 8;
+	val  = 0;
+
+	if (kvm_read_guest(svm->vcpu.kvm, gpa, &val, 1))
+		val &= (1 << bit);
+
+	return val ? NESTED_EXIT_DONE : NESTED_EXIT_HOST;
 }
 
-static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
+static int nested_svm_exit_handled_msr(struct vcpu_svm *svm)
 {
-	u32 param = svm->vmcb->control.exit_info_1 & 1;
-	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
-	bool ret = false;
-	u32 t0, t1;
-	u8 *msrpm;
+	u32 offset, msr, value;
+	int write, mask;
 
 	if (!(svm->nested.intercept & (1ULL << INTERCEPT_MSR_PROT)))
-		return false;
+		return NESTED_EXIT_HOST;
 
-	msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+	msr    = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	offset = svm_msrpm_offset(msr);
+	write  = svm->vmcb->control.exit_info_1 & 1;
+	mask   = 1 << ((2 * (msr & 0xf)) + write);
 
-	if (!msrpm)
-		goto out;
+	if (offset == MSR_INVALID)
+		return NESTED_EXIT_DONE;
 
-	switch (msr) {
-	case 0 ... 0x1fff:
-		t0 = (msr * 2) % 8;
-		t1 = msr / 8;
-		break;
-	case 0xc0000000 ... 0xc0001fff:
-		t0 = (8192 + msr - 0xc0000000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	case 0xc0010000 ... 0xc0011fff:
-		t0 = (16384 + msr - 0xc0010000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	default:
-		ret = true;
-		goto out;
-	}
-
-	ret = msrpm[t1] & ((1 << param) << t0);
+	/* Offset is in 32 bit units but need in 8 bit units */
+	offset *= 4;
 
-out:
-	nested_svm_unmap(msrpm, KM_USER0);
+	if (kvm_read_guest(svm->vcpu.kvm, svm->nested.vmcb_msrpm + offset, &value, 4))
+		return NESTED_EXIT_DONE;
 
-	return ret;
+	return (value & mask) ? NESTED_EXIT_DONE : NESTED_EXIT_HOST;
 }
 
 static int nested_svm_exit_special(struct vcpu_svm *svm)
@@ -1474,17 +1737,21 @@ static int nested_svm_exit_special(struct vcpu_svm *svm)
 	switch (exit_code) {
 	case SVM_EXIT_INTR:
 	case SVM_EXIT_NMI:
+	case SVM_EXIT_EXCP_BASE + MC_VECTOR:
 		return NESTED_EXIT_HOST;
-		/* For now we are always handling NPFs when using them */
 	case SVM_EXIT_NPF:
+		/* For now we are always handling NPFs when using them */
 		if (npt_enabled)
 			return NESTED_EXIT_HOST;
 		break;
-	/* When we're shadowing, trap PFs */
 	case SVM_EXIT_EXCP_BASE + PF_VECTOR:
+		/* When we're shadowing, trap PFs */
 		if (!npt_enabled)
 			return NESTED_EXIT_HOST;
 		break;
+	case SVM_EXIT_EXCP_BASE + NM_VECTOR:
+		nm_interception(svm);
+		break;
 	default:
 		break;
 	}
@@ -1495,7 +1762,7 @@ static int nested_svm_exit_special(struct vcpu_svm *svm)
 /*
  * If this function returns true, this #vmexit was already handled
  */
-static int nested_svm_exit_handled(struct vcpu_svm *svm)
+static int nested_svm_intercept(struct vcpu_svm *svm)
 {
 	u32 exit_code = svm->vmcb->control.exit_code;
 	int vmexit = NESTED_EXIT_HOST;
@@ -1504,6 +1771,9 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm)
 	case SVM_EXIT_MSR:
 		vmexit = nested_svm_exit_handled_msr(svm);
 		break;
+	case SVM_EXIT_IOIO:
+		vmexit = nested_svm_intercept_ioio(svm);
+		break;
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
 		if (svm->nested.intercept_cr_read & cr_bits)
@@ -1534,6 +1804,10 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm)
 			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
+	case SVM_EXIT_ERR: {
+		vmexit = NESTED_EXIT_DONE;
+		break;
+	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		if (svm->nested.intercept & exit_bits)
@@ -1541,9 +1815,17 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm)
 	}
 	}
 
-	if (vmexit == NESTED_EXIT_DONE) {
+	return vmexit;
+}
+
+static int nested_svm_exit_handled(struct vcpu_svm *svm)
+{
+	int vmexit;
+
+	vmexit = nested_svm_intercept(svm);
+
+	if (vmexit == NESTED_EXIT_DONE)
 		nested_svm_vmexit(svm);
-	}
 
 	return vmexit;
 }
@@ -1585,6 +1867,7 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
+	struct page *page;
 
 	trace_kvm_nested_vmexit_inject(vmcb->control.exit_code,
 				       vmcb->control.exit_info_1,
@@ -1592,10 +1875,13 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 				       vmcb->control.exit_int_info,
 				       vmcb->control.exit_int_info_err);
 
-	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
+	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, &page);
 	if (!nested_vmcb)
 		return 1;
 
+	/* Exit nested SVM mode */
+	svm->nested.vmcb = 0;
+
 	/* Give the current vmcb to the guest */
 	disable_gif(svm);
 
@@ -1605,9 +1891,10 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	nested_vmcb->save.ds     = vmcb->save.ds;
 	nested_vmcb->save.gdtr   = vmcb->save.gdtr;
 	nested_vmcb->save.idtr   = vmcb->save.idtr;
-	if (npt_enabled)
-		nested_vmcb->save.cr3    = vmcb->save.cr3;
+	nested_vmcb->save.cr0    = kvm_read_cr0(&svm->vcpu);
+	nested_vmcb->save.cr3    = svm->vcpu.arch.cr3;
 	nested_vmcb->save.cr2    = vmcb->save.cr2;
+	nested_vmcb->save.cr4    = svm->vcpu.arch.cr4;
 	nested_vmcb->save.rflags = vmcb->save.rflags;
 	nested_vmcb->save.rip    = vmcb->save.rip;
 	nested_vmcb->save.rsp    = vmcb->save.rsp;
@@ -1679,10 +1966,7 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	svm->vmcb->save.cpl = 0;
 	svm->vmcb->control.exit_int_info = 0;
 
-	/* Exit nested SVM mode */
-	svm->nested.vmcb = 0;
-
-	nested_svm_unmap(nested_vmcb, KM_USER0);
+	nested_svm_unmap(page);
 
 	kvm_mmu_reset_context(&svm->vcpu);
 	kvm_mmu_load(&svm->vcpu);
@@ -1692,19 +1976,33 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 
 static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 {
-	u32 *nested_msrpm;
+	/*
+	 * This function merges the msr permission bitmaps of kvm and the
+	 * nested vmcb. It is omptimized in that it only merges the parts where
+	 * the kvm msr permission bitmap may contain zero bits
+	 */
 	int i;
 
-	nested_msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
-	if (!nested_msrpm)
-		return false;
+	if (!(svm->nested.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return true;
 
-	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
-		svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+	for (i = 0; i < MSRPM_OFFSETS; i++) {
+		u32 value, p;
+		u64 offset;
 
-	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
+		if (msrpm_offsets[i] == 0xffffffff)
+			break;
 
-	nested_svm_unmap(nested_msrpm, KM_USER0);
+		p      = msrpm_offsets[i];
+		offset = svm->nested.vmcb_msrpm + (p * 4);
+
+		if (kvm_read_guest(svm->vcpu.kvm, offset, &value, 4))
+			return false;
+
+		svm->nested.msrpm[p] = svm->msrpm[p] | value;
+	}
+
+	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
 
 	return true;
 }
@@ -1714,34 +2012,42 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
+	struct page *page;
+	u64 vmcb_gpa;
 
-	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	vmcb_gpa = svm->vmcb->save.rax;
+
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, &page);
 	if (!nested_vmcb)
 		return false;
 
-	/* nested_vmcb is our indicator if nested SVM is activated */
-	svm->nested.vmcb = svm->vmcb->save.rax;
-
-	trace_kvm_nested_vmrun(svm->vmcb->save.rip - 3, svm->nested.vmcb,
+	trace_kvm_nested_vmrun(svm->vmcb->save.rip - 3, vmcb_gpa,
 			       nested_vmcb->save.rip,
 			       nested_vmcb->control.int_ctl,
 			       nested_vmcb->control.event_inj,
 			       nested_vmcb->control.nested_ctl);
 
+	trace_kvm_nested_intercepts(nested_vmcb->control.intercept_cr_read,
+				    nested_vmcb->control.intercept_cr_write,
+				    nested_vmcb->control.intercept_exceptions,
+				    nested_vmcb->control.intercept);
+
 	/* Clear internal status */
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
 
-	/* Save the old vmcb, so we don't need to pick what we save, but
-	   can restore everything when a VMEXIT occurs */
+	/*
+	 * Save the old vmcb, so we don't need to pick what we save, but can
+	 * restore everything when a VMEXIT occurs
+	 */
 	hsave->save.es     = vmcb->save.es;
 	hsave->save.cs     = vmcb->save.cs;
 	hsave->save.ss     = vmcb->save.ss;
 	hsave->save.ds     = vmcb->save.ds;
 	hsave->save.gdtr   = vmcb->save.gdtr;
 	hsave->save.idtr   = vmcb->save.idtr;
-	hsave->save.efer   = svm->vcpu.arch.shadow_efer;
-	hsave->save.cr0    = svm->vcpu.arch.cr0;
+	hsave->save.efer   = svm->vcpu.arch.efer;
+	hsave->save.cr0    = kvm_read_cr0(&svm->vcpu);
 	hsave->save.cr4    = svm->vcpu.arch.cr4;
 	hsave->save.rflags = vmcb->save.rflags;
 	hsave->save.rip    = svm->next_rip;
@@ -1773,14 +2079,17 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	if (npt_enabled) {
 		svm->vmcb->save.cr3 = nested_vmcb->save.cr3;
 		svm->vcpu.arch.cr3 = nested_vmcb->save.cr3;
-	} else {
+	} else
 		kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
-		kvm_mmu_reset_context(&svm->vcpu);
-	}
+
+	/* Guest paging mode is active - reset mmu */
+	kvm_mmu_reset_context(&svm->vcpu);
+
 	svm->vmcb->save.cr2 = svm->vcpu.arch.cr2 = nested_vmcb->save.cr2;
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, nested_vmcb->save.rax);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, nested_vmcb->save.rsp);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, nested_vmcb->save.rip);
+
 	/* In case we don't even reach vcpu_run, the fields are not updated */
 	svm->vmcb->save.rax = nested_vmcb->save.rax;
 	svm->vmcb->save.rsp = nested_vmcb->save.rsp;
@@ -1789,22 +2098,8 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	svm->vmcb->save.dr6 = nested_vmcb->save.dr6;
 	svm->vmcb->save.cpl = nested_vmcb->save.cpl;
 
-	/* We don't want a nested guest to be more powerful than the guest,
-	   so all intercepts are ORed */
-	svm->vmcb->control.intercept_cr_read |=
-		nested_vmcb->control.intercept_cr_read;
-	svm->vmcb->control.intercept_cr_write |=
-		nested_vmcb->control.intercept_cr_write;
-	svm->vmcb->control.intercept_dr_read |=
-		nested_vmcb->control.intercept_dr_read;
-	svm->vmcb->control.intercept_dr_write |=
-		nested_vmcb->control.intercept_dr_write;
-	svm->vmcb->control.intercept_exceptions |=
-		nested_vmcb->control.intercept_exceptions;
-
-	svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
-
-	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa & ~0x0fffULL;
+	svm->nested.vmcb_iopm  = nested_vmcb->control.iopm_base_pa  & ~0x0fffULL;
 
 	/* cache intercepts */
 	svm->nested.intercept_cr_read    = nested_vmcb->control.intercept_cr_read;
@@ -1821,13 +2116,43 @@ static bool nested_svm_vmrun(struct vcpu_svm *svm)
 	else
 		svm->vcpu.arch.hflags &= ~HF_VINTR_MASK;
 
+	if (svm->vcpu.arch.hflags & HF_VINTR_MASK) {
+		/* We only want the cr8 intercept bits of the guest */
+		svm->vmcb->control.intercept_cr_read &= ~INTERCEPT_CR8_MASK;
+		svm->vmcb->control.intercept_cr_write &= ~INTERCEPT_CR8_MASK;
+	}
+
+	/* We don't want to see VMMCALLs from a nested guest */
+	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VMMCALL);
+
+	/*
+	 * We don't want a nested guest to be more powerful than the guest, so
+	 * all intercepts are ORed
+	 */
+	svm->vmcb->control.intercept_cr_read |=
+		nested_vmcb->control.intercept_cr_read;
+	svm->vmcb->control.intercept_cr_write |=
+		nested_vmcb->control.intercept_cr_write;
+	svm->vmcb->control.intercept_dr_read |=
+		nested_vmcb->control.intercept_dr_read;
+	svm->vmcb->control.intercept_dr_write |=
+		nested_vmcb->control.intercept_dr_write;
+	svm->vmcb->control.intercept_exceptions |=
+		nested_vmcb->control.intercept_exceptions;
+
+	svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
+
+	svm->vmcb->control.lbr_ctl = nested_vmcb->control.lbr_ctl;
 	svm->vmcb->control.int_vector = nested_vmcb->control.int_vector;
 	svm->vmcb->control.int_state = nested_vmcb->control.int_state;
 	svm->vmcb->control.tsc_offset += nested_vmcb->control.tsc_offset;
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
-	nested_svm_unmap(nested_vmcb, KM_USER0);
+	nested_svm_unmap(page);
+
+	/* nested_vmcb is our indicator if nested SVM is activated */
+	svm->nested.vmcb = vmcb_gpa;
 
 	enable_gif(svm);
 
@@ -1853,6 +2178,7 @@ static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 static int vmload_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
+	struct page *page;
 
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1860,12 +2186,12 @@ static int vmload_interception(struct vcpu_svm *svm)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, &page);
 	if (!nested_vmcb)
 		return 1;
 
 	nested_svm_vmloadsave(nested_vmcb, svm->vmcb);
-	nested_svm_unmap(nested_vmcb, KM_USER0);
+	nested_svm_unmap(page);
 
 	return 1;
 }
@@ -1873,6 +2199,7 @@ static int vmload_interception(struct vcpu_svm *svm)
 static int vmsave_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
+	struct page *page;
 
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1880,12 +2207,12 @@ static int vmsave_interception(struct vcpu_svm *svm)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, &page);
 	if (!nested_vmcb)
 		return 1;
 
 	nested_svm_vmloadsave(svm->vmcb, nested_vmcb);
-	nested_svm_unmap(nested_vmcb, KM_USER0);
+	nested_svm_unmap(page);
 
 	return 1;
 }
@@ -1988,6 +2315,8 @@ static int task_switch_interception(struct vcpu_svm *svm)
 		svm->vmcb->control.exit_int_info & SVM_EXITINTINFO_TYPE_MASK;
 	uint32_t idt_v =
 		svm->vmcb->control.exit_int_info & SVM_EXITINTINFO_VALID;
+	bool has_error_code = false;
+	u32 error_code = 0;
 
 	tss_selector = (u16)svm->vmcb->control.exit_info_1;
 
@@ -2008,6 +2337,12 @@ static int task_switch_interception(struct vcpu_svm *svm)
 			svm->vcpu.arch.nmi_injected = false;
 			break;
 		case SVM_EXITINTINFO_TYPE_EXEPT:
+			if (svm->vmcb->control.exit_info_2 &
+			    (1ULL << SVM_EXITINFOSHIFT_TS_HAS_ERROR_CODE)) {
+				has_error_code = true;
+				error_code =
+					(u32)svm->vmcb->control.exit_info_2;
+			}
 			kvm_clear_exception_queue(&svm->vcpu);
 			break;
 		case SVM_EXITINTINFO_TYPE_INTR:
@@ -2024,7 +2359,14 @@ static int task_switch_interception(struct vcpu_svm *svm)
 	     (int_vec == OF_VECTOR || int_vec == BP_VECTOR)))
 		skip_emulated_instruction(&svm->vcpu);
 
-	return kvm_task_switch(&svm->vcpu, tss_selector, reason);
+	if (kvm_task_switch(&svm->vcpu, tss_selector, reason,
+				has_error_code, error_code) == EMULATE_FAIL) {
+		svm->vcpu.run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		svm->vcpu.run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		svm->vcpu.run->internal.ndata = 0;
+		return 0;
+	}
+	return 1;
 }
 
 static int cpuid_interception(struct vcpu_svm *svm)
@@ -2037,7 +2379,7 @@ static int cpuid_interception(struct vcpu_svm *svm)
 static int iret_interception(struct vcpu_svm *svm)
 {
 	++svm->vcpu.stat.nmi_window_exits;
-	svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
+	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_IRET);
 	svm->vcpu.arch.hflags |= HF_IRET_MASK;
 	return 1;
 }
@@ -2115,9 +2457,11 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	case MSR_IA32_SYSENTER_ESP:
 		*data = svm->sysenter_esp;
 		break;
-	/* Nobody will change the following 5 values in the VMCB so
-	   we can safely return them on rdmsr. They will always be 0
-	   until LBRV is implemented. */
+	/*
+	 * Nobody will change the following 5 values in the VMCB so we can
+	 * safely return them on rdmsr. They will always be 0 until LBRV is
+	 * implemented.
+	 */
 	case MSR_IA32_DEBUGCTLMSR:
 		*data = svm->vmcb->save.dbgctl;
 		break;
@@ -2137,7 +2481,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = svm->nested.hsave_msr;
 		break;
 	case MSR_VM_CR:
-		*data = 0;
+		*data = svm->nested.vm_cr_msr;
 		break;
 	case MSR_IA32_UCODE_REV:
 		*data = 0x01000065;
@@ -2153,9 +2497,10 @@ static int rdmsr_interception(struct vcpu_svm *svm)
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data;
 
-	if (svm_get_msr(&svm->vcpu, ecx, &data))
+	if (svm_get_msr(&svm->vcpu, ecx, &data)) {
+		trace_kvm_msr_read_ex(ecx);
 		kvm_inject_gp(&svm->vcpu, 0);
-	else {
+	} else {
 		trace_kvm_msr_read(ecx, data);
 
 		svm->vcpu.arch.regs[VCPU_REGS_RAX] = data & 0xffffffff;
@@ -2166,6 +2511,31 @@ static int rdmsr_interception(struct vcpu_svm *svm)
 	return 1;
 }
 
+static int svm_set_vm_cr(struct kvm_vcpu *vcpu, u64 data)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+	int svm_dis, chg_mask;
+
+	if (data & ~SVM_VM_CR_VALID_MASK)
+		return 1;
+
+	chg_mask = SVM_VM_CR_VALID_MASK;
+
+	if (svm->nested.vm_cr_msr & SVM_VM_CR_SVM_DIS_MASK)
+		chg_mask &= ~(SVM_VM_CR_SVM_LOCK_MASK | SVM_VM_CR_SVM_DIS_MASK);
+
+	svm->nested.vm_cr_msr &= ~chg_mask;
+	svm->nested.vm_cr_msr |= (data & chg_mask);
+
+	svm_dis = svm->nested.vm_cr_msr & SVM_VM_CR_SVM_DIS_MASK;
+
+	/* check for svm_disable while efer.svme is set */
+	if (svm_dis && (vcpu->arch.efer & EFER_SVME))
+		return 1;
+
+	return 0;
+}
+
 static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -2232,6 +2602,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		svm->nested.hsave_msr = data;
 		break;
 	case MSR_VM_CR:
+		return svm_set_vm_cr(vcpu, data);
 	case MSR_VM_IGNNE:
 		pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
@@ -2247,13 +2618,15 @@ static int wrmsr_interception(struct vcpu_svm *svm)
 	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	trace_kvm_msr_write(ecx, data);
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
-	if (svm_set_msr(&svm->vcpu, ecx, data))
+	if (svm_set_msr(&svm->vcpu, ecx, data)) {
+		trace_kvm_msr_write_ex(ecx, data);
 		kvm_inject_gp(&svm->vcpu, 0);
-	else
+	} else {
+		trace_kvm_msr_write(ecx, data);
 		skip_emulated_instruction(&svm->vcpu);
+	}
 	return 1;
 }
 
@@ -2293,37 +2666,42 @@ static int pause_interception(struct vcpu_svm *svm)
 }
 
 static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
-	[SVM_EXIT_READ_CR0]           		= emulate_on_interception,
-	[SVM_EXIT_READ_CR3]           		= emulate_on_interception,
-	[SVM_EXIT_READ_CR4]           		= emulate_on_interception,
-	[SVM_EXIT_READ_CR8]           		= emulate_on_interception,
-	/* for now: */
-	[SVM_EXIT_WRITE_CR0]          		= emulate_on_interception,
-	[SVM_EXIT_WRITE_CR3]          		= emulate_on_interception,
-	[SVM_EXIT_WRITE_CR4]          		= emulate_on_interception,
-	[SVM_EXIT_WRITE_CR8]          		= cr8_write_interception,
-	[SVM_EXIT_READ_DR0] 			= emulate_on_interception,
+	[SVM_EXIT_READ_CR0]			= emulate_on_interception,
+	[SVM_EXIT_READ_CR3]			= emulate_on_interception,
+	[SVM_EXIT_READ_CR4]			= emulate_on_interception,
+	[SVM_EXIT_READ_CR8]			= emulate_on_interception,
+	[SVM_EXIT_CR0_SEL_WRITE]		= emulate_on_interception,
+	[SVM_EXIT_WRITE_CR0]			= emulate_on_interception,
+	[SVM_EXIT_WRITE_CR3]			= emulate_on_interception,
+	[SVM_EXIT_WRITE_CR4]			= emulate_on_interception,
+	[SVM_EXIT_WRITE_CR8]			= cr8_write_interception,
+	[SVM_EXIT_READ_DR0]			= emulate_on_interception,
 	[SVM_EXIT_READ_DR1]			= emulate_on_interception,
 	[SVM_EXIT_READ_DR2]			= emulate_on_interception,
 	[SVM_EXIT_READ_DR3]			= emulate_on_interception,
+	[SVM_EXIT_READ_DR4]			= emulate_on_interception,
+	[SVM_EXIT_READ_DR5]			= emulate_on_interception,
+	[SVM_EXIT_READ_DR6]			= emulate_on_interception,
+	[SVM_EXIT_READ_DR7]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR0]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR1]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR2]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR3]			= emulate_on_interception,
+	[SVM_EXIT_WRITE_DR4]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR5]			= emulate_on_interception,
+	[SVM_EXIT_WRITE_DR6]			= emulate_on_interception,
 	[SVM_EXIT_WRITE_DR7]			= emulate_on_interception,
 	[SVM_EXIT_EXCP_BASE + DB_VECTOR]	= db_interception,
 	[SVM_EXIT_EXCP_BASE + BP_VECTOR]	= bp_interception,
 	[SVM_EXIT_EXCP_BASE + UD_VECTOR]	= ud_interception,
-	[SVM_EXIT_EXCP_BASE + PF_VECTOR] 	= pf_interception,
-	[SVM_EXIT_EXCP_BASE + NM_VECTOR] 	= nm_interception,
-	[SVM_EXIT_EXCP_BASE + MC_VECTOR] 	= mc_interception,
-	[SVM_EXIT_INTR] 			= intr_interception,
+	[SVM_EXIT_EXCP_BASE + PF_VECTOR]	= pf_interception,
+	[SVM_EXIT_EXCP_BASE + NM_VECTOR]	= nm_interception,
+	[SVM_EXIT_EXCP_BASE + MC_VECTOR]	= mc_interception,
+	[SVM_EXIT_INTR]				= intr_interception,
 	[SVM_EXIT_NMI]				= nmi_interception,
 	[SVM_EXIT_SMI]				= nop_on_interception,
 	[SVM_EXIT_INIT]				= nop_on_interception,
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
-	/* [SVM_EXIT_CR0_SEL_WRITE]		= emulate_on_interception, */
 	[SVM_EXIT_CPUID]			= cpuid_interception,
 	[SVM_EXIT_IRET]                         = iret_interception,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
@@ -2331,7 +2709,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
 	[SVM_EXIT_INVLPGA]			= invlpga_interception,
-	[SVM_EXIT_IOIO] 		  	= io_interception,
+	[SVM_EXIT_IOIO]				= io_interception,
 	[SVM_EXIT_MSR]				= msr_interception,
 	[SVM_EXIT_TASK_SWITCH]			= task_switch_interception,
 	[SVM_EXIT_SHUTDOWN]			= shutdown_interception,
@@ -2354,7 +2732,12 @@ static int handle_exit(struct kvm_vcpu *vcpu)
 	struct kvm_run *kvm_run = vcpu->run;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
-	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
+	trace_kvm_exit(exit_code, vcpu);
+
+	if (!(svm->vmcb->control.intercept_cr_write & INTERCEPT_CR0_MASK))
+		vcpu->arch.cr0 = svm->vmcb->save.cr0;
+	if (npt_enabled)
+		vcpu->arch.cr3 = svm->vmcb->save.cr3;
 
 	if (unlikely(svm->nested.exit_required)) {
 		nested_svm_vmexit(svm);
@@ -2383,21 +2766,6 @@ static int handle_exit(struct kvm_vcpu *vcpu)
 
 	svm_complete_interrupts(svm);
 
-	if (npt_enabled) {
-		int mmu_reload = 0;
-		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
-			svm_set_cr0(vcpu, svm->vmcb->save.cr0);
-			mmu_reload = 1;
-		}
-		vcpu->arch.cr0 = svm->vmcb->save.cr0;
-		vcpu->arch.cr3 = svm->vmcb->save.cr3;
-		if (mmu_reload) {
-			kvm_mmu_reset_context(vcpu);
-			kvm_mmu_load(vcpu);
-		}
-	}
-
-
 	if (svm->vmcb->control.exit_code == SVM_EXIT_ERR) {
 		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
 		kvm_run->fail_entry.hardware_entry_failure_reason
@@ -2450,7 +2818,7 @@ static void svm_inject_nmi(struct kvm_vcpu *vcpu)
 
 	svm->vmcb->control.event_inj = SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_NMI;
 	vcpu->arch.hflags |= HF_NMI_MASK;
-	svm->vmcb->control.intercept |= (1UL << INTERCEPT_IRET);
+	svm->vmcb->control.intercept |= (1ULL << INTERCEPT_IRET);
 	++vcpu->stat.nmi_injections;
 }
 
@@ -2482,6 +2850,9 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	if (is_nested(svm) && (vcpu->arch.hflags & HF_VINTR_MASK))
+		return;
+
 	if (irr == -1)
 		return;
 
@@ -2493,8 +2864,12 @@ static int svm_nmi_allowed(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb *vmcb = svm->vmcb;
-	return !(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		!(svm->vcpu.arch.hflags & HF_NMI_MASK);
+	int ret;
+	ret = !(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
+	      !(svm->vcpu.arch.hflags & HF_NMI_MASK);
+	ret = ret && gif_set(svm) && nested_svm_nmi(svm);
+
+	return ret;
 }
 
 static bool svm_get_nmi_mask(struct kvm_vcpu *vcpu)
@@ -2510,10 +2885,10 @@ static void svm_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
 
 	if (masked) {
 		svm->vcpu.arch.hflags |= HF_NMI_MASK;
-		svm->vmcb->control.intercept |= (1UL << INTERCEPT_IRET);
+		svm->vmcb->control.intercept |= (1ULL << INTERCEPT_IRET);
 	} else {
 		svm->vcpu.arch.hflags &= ~HF_NMI_MASK;
-		svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
+		svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_IRET);
 	}
 }
 
@@ -2539,13 +2914,13 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	nested_svm_intr(svm);
-
-	/* In case GIF=0 we can't rely on the CPU to tell us when
-	 * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
-	 * The next time we get that intercept, this function will be
-	 * called again though and we'll get the vintr intercept. */
-	if (gif_set(svm)) {
+	/*
+	 * In case GIF=0 we can't rely on the CPU to tell us when GIF becomes
+	 * 1, because that's a separate STGI/VMRUN intercept.  The next time we
+	 * get that intercept, this function will be called again though and
+	 * we'll get the vintr intercept.
+	 */
+	if (gif_set(svm) && nested_svm_intr(svm)) {
 		svm_set_vintr(svm);
 		svm_inject_irq(svm, 0x0);
 	}
@@ -2559,9 +2934,10 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 	    == HF_NMI_MASK)
 		return; /* IRET will cause a vm exit */
 
-	/* Something prevents NMI from been injected. Single step over
-	   possible problem (IRET or exception injection or interrupt
-	   shadow) */
+	/*
+	 * Something prevents NMI from been injected. Single step over possible
+	 * problem (IRET or exception injection or interrupt shadow)
+	 */
 	svm->nmi_singlestep = true;
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
 	update_db_intercept(vcpu);
@@ -2585,6 +2961,9 @@ static inline void sync_cr8_to_lapic(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
+	if (is_nested(svm) && (vcpu->arch.hflags & HF_VINTR_MASK))
+		return;
+
 	if (!(svm->vmcb->control.intercept_cr_write & INTERCEPT_CR8_MASK)) {
 		int cr8 = svm->vmcb->control.int_ctl & V_TPR_MASK;
 		kvm_set_cr8(vcpu, cr8);
@@ -2596,6 +2975,9 @@ static inline void sync_lapic_to_cr8(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u64 cr8;
 
+	if (is_nested(svm) && (vcpu->arch.hflags & HF_VINTR_MASK))
+		return;
+
 	cr8 = kvm_get_cr8(vcpu);
 	svm->vmcb->control.int_ctl &= ~V_TPR_MASK;
 	svm->vmcb->control.int_ctl |= cr8 & V_TPR_MASK;
@@ -2606,6 +2988,9 @@ static void svm_complete_interrupts(struct vcpu_svm *svm)
 	u8 vector;
 	int type;
 	u32 exitintinfo = svm->vmcb->control.exit_int_info;
+	unsigned int3_injected = svm->int3_injected;
+
+	svm->int3_injected = 0;
 
 	if (svm->vcpu.arch.hflags & HF_IRET_MASK)
 		svm->vcpu.arch.hflags &= ~(HF_NMI_MASK | HF_IRET_MASK);
@@ -2625,18 +3010,25 @@ static void svm_complete_interrupts(struct vcpu_svm *svm)
 		svm->vcpu.arch.nmi_injected = true;
 		break;
 	case SVM_EXITINTINFO_TYPE_EXEPT:
-		/* In case of software exception do not reinject an exception
-		   vector, but re-execute and instruction instead */
-		if (is_nested(svm))
-			break;
-		if (kvm_exception_is_soft(vector))
+		/*
+		 * In case of software exceptions, do not reinject the vector,
+		 * but re-execute the instruction instead. Rewind RIP first
+		 * if we emulated INT3 before.
+		 */
+		if (kvm_exception_is_soft(vector)) {
+			if (vector == BP_VECTOR && int3_injected &&
+			    kvm_is_linear_rip(&svm->vcpu, svm->int3_rip))
+				kvm_rip_write(&svm->vcpu,
+					      kvm_rip_read(&svm->vcpu) -
+					      int3_injected);
 			break;
+		}
 		if (exitintinfo & SVM_EXITINTINFO_VALID_ERR) {
 			u32 err = svm->vmcb->control.exit_int_info_err;
-			kvm_queue_exception_e(&svm->vcpu, vector, err);
+			kvm_requeue_exception_e(&svm->vcpu, vector, err);
 
 		} else
-			kvm_queue_exception(&svm->vcpu, vector);
+			kvm_requeue_exception(&svm->vcpu, vector);
 		break;
 	case SVM_EXITINTINFO_TYPE_INTR:
 		kvm_queue_interrupt(&svm->vcpu, vector, false);
@@ -2659,6 +3051,10 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	u16 gs_selector;
 	u16 ldt_selector;
 
+	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
+	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
+	svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP];
+
 	/*
 	 * A vmexit emulation is required before the vcpu can be executed
 	 * again.
@@ -2666,10 +3062,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	if (unlikely(svm->nested.exit_required))
 		return;
 
-	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
-	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
-	svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP];
-
 	pre_svm_run(svm);
 
 	sync_lapic_to_cr8(vcpu);
@@ -2782,6 +3174,14 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
 		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
 	}
+
+	/*
+	 * We need to handle MC intercepts here before the vcpu has a chance to
+	 * change the physical cpu
+	 */
+	if (unlikely(svm->vmcb->control.exit_code ==
+		     SVM_EXIT_EXCP_BASE + MC_VECTOR))
+		svm_handle_mce(svm);
 }
 
 #undef R
@@ -2798,12 +3198,6 @@ static void svm_set_cr3(struct kvm_vcpu *vcpu, unsigned long root)
 
 	svm->vmcb->save.cr3 = root;
 	force_new_asid(vcpu);
-
-	if (vcpu->fpu_active) {
-		svm->vmcb->control.intercept_exceptions |= (1 << NM_VECTOR);
-		svm->vmcb->save.cr0 |= X86_CR0_TS;
-		vcpu->fpu_active = 0;
-	}
 }
 
 static int is_disabled(void)
@@ -2852,25 +3246,43 @@ static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	return 0;
 }
 
+static void svm_cpuid_update(struct kvm_vcpu *vcpu)
+{
+}
+
+static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
+{
+	switch (func) {
+	case 0x8000000A:
+		entry->eax = 1; /* SVM revision 1 */
+		entry->ebx = 8; /* Lets support 8 ASIDs in case we add proper
+				   ASID emulation to nested SVM */
+		entry->ecx = 0; /* Reserved */
+		entry->edx = 0; /* Do not support any additional features */
+
+		break;
+	}
+}
+
 static const struct trace_print_flags svm_exit_reasons_str[] = {
-	{ SVM_EXIT_READ_CR0,           		"read_cr0" },
-	{ SVM_EXIT_READ_CR3,	      		"read_cr3" },
-	{ SVM_EXIT_READ_CR4,	      		"read_cr4" },
-	{ SVM_EXIT_READ_CR8,  	      		"read_cr8" },
-	{ SVM_EXIT_WRITE_CR0,          		"write_cr0" },
-	{ SVM_EXIT_WRITE_CR3,	      		"write_cr3" },
-	{ SVM_EXIT_WRITE_CR4,          		"write_cr4" },
-	{ SVM_EXIT_WRITE_CR8, 	      		"write_cr8" },
-	{ SVM_EXIT_READ_DR0, 	      		"read_dr0" },
-	{ SVM_EXIT_READ_DR1,	      		"read_dr1" },
-	{ SVM_EXIT_READ_DR2,	      		"read_dr2" },
-	{ SVM_EXIT_READ_DR3,	      		"read_dr3" },
-	{ SVM_EXIT_WRITE_DR0,	      		"write_dr0" },
-	{ SVM_EXIT_WRITE_DR1,	      		"write_dr1" },
-	{ SVM_EXIT_WRITE_DR2,	      		"write_dr2" },
-	{ SVM_EXIT_WRITE_DR3,	      		"write_dr3" },
-	{ SVM_EXIT_WRITE_DR5,	      		"write_dr5" },
-	{ SVM_EXIT_WRITE_DR7,	      		"write_dr7" },
+	{ SVM_EXIT_READ_CR0,			"read_cr0" },
+	{ SVM_EXIT_READ_CR3,			"read_cr3" },
+	{ SVM_EXIT_READ_CR4,			"read_cr4" },
+	{ SVM_EXIT_READ_CR8,			"read_cr8" },
+	{ SVM_EXIT_WRITE_CR0,			"write_cr0" },
+	{ SVM_EXIT_WRITE_CR3,			"write_cr3" },
+	{ SVM_EXIT_WRITE_CR4,			"write_cr4" },
+	{ SVM_EXIT_WRITE_CR8,			"write_cr8" },
+	{ SVM_EXIT_READ_DR0,			"read_dr0" },
+	{ SVM_EXIT_READ_DR1,			"read_dr1" },
+	{ SVM_EXIT_READ_DR2,			"read_dr2" },
+	{ SVM_EXIT_READ_DR3,			"read_dr3" },
+	{ SVM_EXIT_WRITE_DR0,			"write_dr0" },
+	{ SVM_EXIT_WRITE_DR1,			"write_dr1" },
+	{ SVM_EXIT_WRITE_DR2,			"write_dr2" },
+	{ SVM_EXIT_WRITE_DR3,			"write_dr3" },
+	{ SVM_EXIT_WRITE_DR5,			"write_dr5" },
+	{ SVM_EXIT_WRITE_DR7,			"write_dr7" },
 	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,	"DB excp" },
 	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,	"BP excp" },
 	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,	"UD excp" },
@@ -2905,9 +3317,24 @@ static const struct trace_print_flags svm_exit_reasons_str[] = {
 	{ -1, NULL }
 };
 
-static bool svm_gb_page_enable(void)
+static int svm_get_lpage_level(void)
 {
-	return true;
+	return PT_PDPE_LEVEL;
+}
+
+static bool svm_rdtscp_supported(void)
+{
+	return false;
+}
+
+static void svm_fpu_deactivate(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	svm->vmcb->control.intercept_exceptions |= 1 << NM_VECTOR;
+	if (is_nested(svm))
+		svm->nested.hsave->control.intercept_exceptions |= 1 << NM_VECTOR;
+	update_cr0_intercept(svm);
 }
 
 static struct kvm_x86_ops svm_x86_ops = {
@@ -2936,6 +3363,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_segment = svm_set_segment,
 	.get_cpl = svm_get_cpl,
 	.get_cs_db_l_bits = kvm_get_cs_db_l_bits,
+	.decache_cr0_guest_bits = svm_decache_cr0_guest_bits,
 	.decache_cr4_guest_bits = svm_decache_cr4_guest_bits,
 	.set_cr0 = svm_set_cr0,
 	.set_cr3 = svm_set_cr3,
@@ -2945,11 +3373,12 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_idt = svm_set_idt,
 	.get_gdt = svm_get_gdt,
 	.set_gdt = svm_set_gdt,
-	.get_dr = svm_get_dr,
-	.set_dr = svm_set_dr,
+	.set_dr7 = svm_set_dr7,
 	.cache_reg = svm_cache_reg,
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
+	.fpu_activate = svm_fpu_activate,
+	.fpu_deactivate = svm_fpu_deactivate,
 
 	.tlb_flush = svm_flush_tlb,
 
@@ -2975,13 +3404,19 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.get_mt_mask = svm_get_mt_mask,
 
 	.exit_reasons_str = svm_exit_reasons_str,
-	.gb_page_enable = svm_gb_page_enable,
+	.get_lpage_level = svm_get_lpage_level,
+
+	.cpuid_update = svm_cpuid_update,
+
+	.rdtscp_supported = svm_rdtscp_supported,
+
+	.set_supported_cpuid = svm_set_supported_cpuid,
 };
 
 static int __init svm_init(void)
 {
 	return kvm_init(&svm_x86_ops, sizeof(struct vcpu_svm),
-			      THIS_MODULE);
+			__alignof__(struct vcpu_svm), THIS_MODULE);
 }
 
 static void __exit svm_exit(void)
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index eea4043..4ddadb1 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -12,7 +12,8 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	/*
 	 * There is a race window between reading and incrementing, but we do
 	 * not care about potentially loosing timer events in the !reinject
-	 * case anyway.
+	 * case anyway. Note: KVM_REQ_PENDING_TIMER is implicitly checked
+	 * in vcpu_enter_guest.
 	 */
 	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
 		atomic_inc(&ktimer->pending);
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 816e044..a6544b8 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -5,8 +5,6 @@
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm
-#define TRACE_INCLUDE_PATH arch/x86/kvm
-#define TRACE_INCLUDE_FILE trace
 
 /*
  * Tracepoint for guest mode entry.
@@ -56,6 +54,38 @@ TRACE_EVENT(kvm_hypercall,
 );
 
 /*
+ * Tracepoint for hypercall.
+ */
+TRACE_EVENT(kvm_hv_hypercall,
+	TP_PROTO(__u16 code, bool fast, __u16 rep_cnt, __u16 rep_idx,
+		 __u64 ingpa, __u64 outgpa),
+	TP_ARGS(code, fast, rep_cnt, rep_idx, ingpa, outgpa),
+
+	TP_STRUCT__entry(
+		__field(	__u16, 		code		)
+		__field(	bool,		fast		)
+		__field(	__u16,		rep_cnt		)
+		__field(	__u16,		rep_idx		)
+		__field(	__u64,		ingpa		)
+		__field(	__u64,		outgpa		)
+	),
+
+	TP_fast_assign(
+		__entry->code		= code;
+		__entry->fast		= fast;
+		__entry->rep_cnt	= rep_cnt;
+		__entry->rep_idx	= rep_idx;
+		__entry->ingpa		= ingpa;
+		__entry->outgpa		= outgpa;
+	),
+
+	TP_printk("code 0x%x %s cnt 0x%x idx 0x%x in 0x%llx out 0x%llx",
+		  __entry->code, __entry->fast ? "fast" : "slow",
+		  __entry->rep_cnt, __entry->rep_idx,  __entry->ingpa,
+		  __entry->outgpa)
+);
+
+/*
  * Tracepoint for PIO.
  */
 TRACE_EVENT(kvm_pio,
@@ -152,8 +182,8 @@ TRACE_EVENT(kvm_apic,
  * Tracepoint for kvm guest exit:
  */
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned int exit_reason, unsigned long guest_rip),
-	TP_ARGS(exit_reason, guest_rip),
+	TP_PROTO(unsigned int exit_reason, struct kvm_vcpu *vcpu),
+	TP_ARGS(exit_reason, vcpu),
 
 	TP_STRUCT__entry(
 		__field(	unsigned int,	exit_reason	)
@@ -162,7 +192,7 @@ TRACE_EVENT(kvm_exit,
 
 	TP_fast_assign(
 		__entry->exit_reason	= exit_reason;
-		__entry->guest_rip	= guest_rip;
+		__entry->guest_rip	= kvm_rip_read(vcpu);
 	),
 
 	TP_printk("reason %s rip 0x%lx",
@@ -189,6 +219,38 @@ TRACE_EVENT(kvm_inj_virq,
 	TP_printk("irq %u", __entry->irq)
 );
 
+#define EXS(x) { x##_VECTOR, "#" #x }
+
+#define kvm_trace_sym_exc						\
+	EXS(DE), EXS(DB), EXS(BP), EXS(OF), EXS(BR), EXS(UD), EXS(NM),	\
+	EXS(DF), EXS(TS), EXS(NP), EXS(SS), EXS(GP), EXS(PF),		\
+	EXS(MF), EXS(MC)
+
+/*
+ * Tracepoint for kvm interrupt injection:
+ */
+TRACE_EVENT(kvm_inj_exception,
+	TP_PROTO(unsigned exception, bool has_error, unsigned error_code),
+	TP_ARGS(exception, has_error, error_code),
+
+	TP_STRUCT__entry(
+		__field(	u8,	exception	)
+		__field(	u8,	has_error	)
+		__field(	u32,	error_code	)
+	),
+
+	TP_fast_assign(
+		__entry->exception	= exception;
+		__entry->has_error	= has_error;
+		__entry->error_code	= error_code;
+	),
+
+	TP_printk("%s (0x%x)",
+		  __print_symbolic(__entry->exception, kvm_trace_sym_exc),
+		  /* FIXME: don't print error_code if not present */
+		  __entry->has_error ? __entry->error_code : 0)
+);
+
 /*
  * Tracepoint for page fault.
  */
@@ -214,28 +276,33 @@ TRACE_EVENT(kvm_page_fault,
  * Tracepoint for guest MSR access.
  */
 TRACE_EVENT(kvm_msr,
-	TP_PROTO(unsigned int rw, unsigned int ecx, unsigned long data),
-	TP_ARGS(rw, ecx, data),
+	TP_PROTO(unsigned write, u32 ecx, u64 data, bool exception),
+	TP_ARGS(write, ecx, data, exception),
 
 	TP_STRUCT__entry(
-		__field(	unsigned int,	rw		)
-		__field(	unsigned int,	ecx		)
-		__field(	unsigned long,	data		)
+		__field(	unsigned,	write		)
+		__field(	u32,		ecx		)
+		__field(	u64,		data		)
+		__field(	u8,		exception	)
 	),
 
 	TP_fast_assign(
-		__entry->rw		= rw;
+		__entry->write		= write;
 		__entry->ecx		= ecx;
 		__entry->data		= data;
+		__entry->exception	= exception;
 	),
 
-	TP_printk("msr_%s %x = 0x%lx",
-		  __entry->rw ? "write" : "read",
-		  __entry->ecx, __entry->data)
+	TP_printk("msr_%s %x = 0x%llx%s",
+		  __entry->write ? "write" : "read",
+		  __entry->ecx, __entry->data,
+		  __entry->exception ? " (#GP)" : "")
 );
 
-#define trace_kvm_msr_read(ecx, data)		trace_kvm_msr(0, ecx, data)
-#define trace_kvm_msr_write(ecx, data)		trace_kvm_msr(1, ecx, data)
+#define trace_kvm_msr_read(ecx, data)      trace_kvm_msr(0, ecx, data, false)
+#define trace_kvm_msr_write(ecx, data)     trace_kvm_msr(1, ecx, data, false)
+#define trace_kvm_msr_read_ex(ecx)         trace_kvm_msr(0, ecx, 0, true)
+#define trace_kvm_msr_write_ex(ecx, data)  trace_kvm_msr(1, ecx, data, true)
 
 /*
  * Tracepoint for guest CR access.
@@ -376,12 +443,34 @@ TRACE_EVENT(kvm_nested_vmrun,
 	),
 
 	TP_printk("rip: 0x%016llx vmcb: 0x%016llx nrip: 0x%016llx int_ctl: 0x%08x "
-		  "event_inj: 0x%08x npt: %s\n",
+		  "event_inj: 0x%08x npt: %s",
 		__entry->rip, __entry->vmcb, __entry->nested_rip,
 		__entry->int_ctl, __entry->event_inj,
 		__entry->npt ? "on" : "off")
 );
 
+TRACE_EVENT(kvm_nested_intercepts,
+	    TP_PROTO(__u16 cr_read, __u16 cr_write, __u32 exceptions, __u64 intercept),
+	    TP_ARGS(cr_read, cr_write, exceptions, intercept),
+
+	TP_STRUCT__entry(
+		__field(	__u16,		cr_read		)
+		__field(	__u16,		cr_write	)
+		__field(	__u32,		exceptions	)
+		__field(	__u64,		intercept	)
+	),
+
+	TP_fast_assign(
+		__entry->cr_read	= cr_read;
+		__entry->cr_write	= cr_write;
+		__entry->exceptions	= exceptions;
+		__entry->intercept	= intercept;
+	),
+
+	TP_printk("cr_read: %04x cr_write: %04x excp: %08x intercept: %016llx",
+		__entry->cr_read, __entry->cr_write, __entry->exceptions,
+		__entry->intercept)
+);
 /*
  * Tracepoint for #VMEXIT while nested
  */
@@ -410,7 +499,7 @@ TRACE_EVENT(kvm_nested_vmexit,
 		__entry->exit_int_info_err	= exit_int_info_err;
 	),
 	TP_printk("rip: 0x%016llx reason: %s ext_inf1: 0x%016llx "
-		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x",
 		  __entry->rip,
 		  ftrace_print_symbols_seq(p, __entry->exit_code,
 					   kvm_x86_ops->exit_reasons_str),
@@ -445,7 +534,7 @@ TRACE_EVENT(kvm_nested_vmexit_inject,
 	),
 
 	TP_printk("reason: %s ext_inf1: 0x%016llx "
-		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x",
 		  ftrace_print_symbols_seq(p, __entry->exit_code,
 					   kvm_x86_ops->exit_reasons_str),
 		__entry->exit_info1, __entry->exit_info2,
@@ -467,7 +556,7 @@ TRACE_EVENT(kvm_nested_intr_vmexit,
 		__entry->rip	=	rip
 	),
 
-	TP_printk("rip: 0x%016llx\n", __entry->rip)
+	TP_printk("rip: 0x%016llx", __entry->rip)
 );
 
 /*
@@ -489,7 +578,7 @@ TRACE_EVENT(kvm_invlpga,
 		__entry->address	=	address;
 	),
 
-	TP_printk("rip: 0x%016llx asid: %d address: 0x%016llx\n",
+	TP_printk("rip: 0x%016llx asid: %d address: 0x%016llx",
 		  __entry->rip, __entry->asid, __entry->address)
 );
 
@@ -510,11 +599,102 @@ TRACE_EVENT(kvm_skinit,
 		__entry->slb		=	slb;
 	),
 
-	TP_printk("rip: 0x%016llx slb: 0x%08x\n",
+	TP_printk("rip: 0x%016llx slb: 0x%08x",
 		  __entry->rip, __entry->slb)
 );
 
+#define __print_insn(insn, ilen) ({		                 \
+	int i;							 \
+	const char *ret = p->buffer + p->len;			 \
+								 \
+	for (i = 0; i < ilen; ++i)				 \
+		trace_seq_printf(p, " %02x", insn[i]);		 \
+	trace_seq_printf(p, "%c", 0);				 \
+	ret;							 \
+	})
+
+#define KVM_EMUL_INSN_F_CR0_PE (1 << 0)
+#define KVM_EMUL_INSN_F_EFL_VM (1 << 1)
+#define KVM_EMUL_INSN_F_CS_D   (1 << 2)
+#define KVM_EMUL_INSN_F_CS_L   (1 << 3)
+
+#define kvm_trace_symbol_emul_flags	                  \
+	{ 0,   			    "real" },		  \
+	{ KVM_EMUL_INSN_F_CR0_PE			  \
+	  | KVM_EMUL_INSN_F_EFL_VM, "vm16" },		  \
+	{ KVM_EMUL_INSN_F_CR0_PE,   "prot16" },		  \
+	{ KVM_EMUL_INSN_F_CR0_PE			  \
+	  | KVM_EMUL_INSN_F_CS_D,   "prot32" },		  \
+	{ KVM_EMUL_INSN_F_CR0_PE			  \
+	  | KVM_EMUL_INSN_F_CS_L,   "prot64" }
+
+#define kei_decode_mode(mode) ({			\
+	u8 flags = 0xff;				\
+	switch (mode) {					\
+	case X86EMUL_MODE_REAL:				\
+		flags = 0;				\
+		break;					\
+	case X86EMUL_MODE_VM86:				\
+		flags = KVM_EMUL_INSN_F_EFL_VM;		\
+		break;					\
+	case X86EMUL_MODE_PROT16:			\
+		flags = KVM_EMUL_INSN_F_CR0_PE;		\
+		break;					\
+	case X86EMUL_MODE_PROT32:			\
+		flags = KVM_EMUL_INSN_F_CR0_PE		\
+			| KVM_EMUL_INSN_F_CS_D;		\
+		break;					\
+	case X86EMUL_MODE_PROT64:			\
+		flags = KVM_EMUL_INSN_F_CR0_PE		\
+			| KVM_EMUL_INSN_F_CS_L;		\
+		break;					\
+	}						\
+	flags;						\
+	})
+
+TRACE_EVENT(kvm_emulate_insn,
+	TP_PROTO(struct kvm_vcpu *vcpu, __u8 failed),
+	TP_ARGS(vcpu, failed),
+
+	TP_STRUCT__entry(
+		__field(    __u64, rip                       )
+		__field(    __u32, csbase                    )
+		__field(    __u8,  len                       )
+		__array(    __u8,  insn,    15	             )
+		__field(    __u8,  flags       	   	     )
+		__field(    __u8,  failed                    )
+		),
+
+	TP_fast_assign(
+		__entry->rip = vcpu->arch.emulate_ctxt.decode.fetch.start;
+		__entry->csbase = kvm_x86_ops->get_segment_base(vcpu, VCPU_SREG_CS);
+		__entry->len = vcpu->arch.emulate_ctxt.decode.eip
+			       - vcpu->arch.emulate_ctxt.decode.fetch.start;
+		memcpy(__entry->insn,
+		       vcpu->arch.emulate_ctxt.decode.fetch.data,
+		       15);
+		__entry->flags = kei_decode_mode(vcpu->arch.emulate_ctxt.mode);
+		__entry->failed = failed;
+		),
+
+	TP_printk("%x:%llx:%s (%s)%s",
+		  __entry->csbase, __entry->rip,
+		  __print_insn(__entry->insn, __entry->len),
+		  __print_symbolic(__entry->flags,
+				   kvm_trace_symbol_emul_flags),
+		  __entry->failed ? " failed" : ""
+		)
+	);
+
+#define trace_kvm_emulate_insn_start(vcpu) trace_kvm_emulate_insn(vcpu, 0)
+#define trace_kvm_emulate_insn_failed(vcpu) trace_kvm_emulate_insn(vcpu, 1)
+
 #endif /* _TRACE_KVM_H */
 
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH arch/x86/kvm
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
 /* This part must be outside protection */
 #include <trace/define_trace.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d4918d6..ee03679 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -26,6 +26,8 @@
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
 #include <linux/ftrace_event.h>
+#include <linux/slab.h>
+#include <linux/tboot.h>
 #include "kvm_cache_regs.h"
 #include "x86.h"
 
@@ -61,6 +63,23 @@ module_param_named(unrestricted_guest,
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
+#define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK						\
+	(KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
+#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE)
+#define KVM_VM_CR0_ALWAYS_ON						\
+	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
+#define KVM_CR4_GUEST_OWNED_BITS				      \
+	(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR      \
+	 | X86_CR4_OSXMMEXCPT)
+
+#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
+#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
+
+#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM))
+
 /*
  * These 2 parameters are used to config the controls for Pause-Loop Exiting:
  * ple_gap:    upper bound on the amount of time between two successive
@@ -80,6 +99,8 @@ module_param(ple_gap, int, S_IRUGO);
 static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
 module_param(ple_window, int, S_IRUGO);
 
+#define NR_AUTOLOAD_MSRS 1
+
 struct vmcs {
 	u32 revision_id;
 	u32 abort;
@@ -107,6 +128,11 @@ struct vcpu_vmx {
 	u64 		      msr_guest_kernel_gs_base;
 #endif
 	struct vmcs          *vmcs;
+	struct msr_autoload {
+		unsigned nr;
+		struct vmx_msr_entry guest[NR_AUTOLOAD_MSRS];
+		struct vmx_msr_entry host[NR_AUTOLOAD_MSRS];
+	} msr_autoload;
 	struct {
 		int           loaded;
 		u16           fs_sel, gs_sel, ldt_sel;
@@ -115,7 +141,7 @@ struct vcpu_vmx {
 	} host_state;
 	struct {
 		int vm86_active;
-		u8 save_iopl;
+		ulong save_rflags;
 		struct kvm_save_segment {
 			u16 selector;
 			unsigned long base;
@@ -136,6 +162,8 @@ struct vcpu_vmx {
 	ktime_t entry_time;
 	s64 vnmi_blocked_time;
 	u32 exit_reason;
+
+	bool rdtscp_enabled;
 };
 
 static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
@@ -210,60 +238,60 @@ static const u32 vmx_msr_index[] = {
 #ifdef CONFIG_X86_64
 	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR,
 #endif
-	MSR_EFER, MSR_K6_STAR,
+	MSR_EFER, MSR_TSC_AUX, MSR_K6_STAR,
 };
 #define NR_VMX_MSR ARRAY_SIZE(vmx_msr_index)
 
-static inline int is_page_fault(u32 intr_info)
+static inline bool is_page_fault(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
 		(INTR_TYPE_HARD_EXCEPTION | PF_VECTOR | INTR_INFO_VALID_MASK);
 }
 
-static inline int is_no_device(u32 intr_info)
+static inline bool is_no_device(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
 		(INTR_TYPE_HARD_EXCEPTION | NM_VECTOR | INTR_INFO_VALID_MASK);
 }
 
-static inline int is_invalid_opcode(u32 intr_info)
+static inline bool is_invalid_opcode(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
 		(INTR_TYPE_HARD_EXCEPTION | UD_VECTOR | INTR_INFO_VALID_MASK);
 }
 
-static inline int is_external_interrupt(u32 intr_info)
+static inline bool is_external_interrupt(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
 		== (INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
-static inline int is_machine_check(u32 intr_info)
+static inline bool is_machine_check(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
 		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
 }
 
-static inline int cpu_has_vmx_msr_bitmap(void)
+static inline bool cpu_has_vmx_msr_bitmap(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
 }
 
-static inline int cpu_has_vmx_tpr_shadow(void)
+static inline bool cpu_has_vmx_tpr_shadow(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW;
 }
 
-static inline int vm_need_tpr_shadow(struct kvm *kvm)
+static inline bool vm_need_tpr_shadow(struct kvm *kvm)
 {
 	return (cpu_has_vmx_tpr_shadow()) && (irqchip_in_kernel(kvm));
 }
 
-static inline int cpu_has_secondary_exec_ctrls(void)
+static inline bool cpu_has_secondary_exec_ctrls(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl &
 		CPU_BASED_ACTIVATE_SECONDARY_CONTROLS;
@@ -283,71 +311,80 @@ static inline bool cpu_has_vmx_flexpriority(void)
 
 static inline bool cpu_has_vmx_ept_execute_only(void)
 {
-	return !!(vmx_capability.ept & VMX_EPT_EXECUTE_ONLY_BIT);
+	return vmx_capability.ept & VMX_EPT_EXECUTE_ONLY_BIT;
 }
 
 static inline bool cpu_has_vmx_eptp_uncacheable(void)
 {
-	return !!(vmx_capability.ept & VMX_EPTP_UC_BIT);
+	return vmx_capability.ept & VMX_EPTP_UC_BIT;
 }
 
 static inline bool cpu_has_vmx_eptp_writeback(void)
 {
-	return !!(vmx_capability.ept & VMX_EPTP_WB_BIT);
+	return vmx_capability.ept & VMX_EPTP_WB_BIT;
 }
 
 static inline bool cpu_has_vmx_ept_2m_page(void)
 {
-	return !!(vmx_capability.ept & VMX_EPT_2MB_PAGE_BIT);
+	return vmx_capability.ept & VMX_EPT_2MB_PAGE_BIT;
+}
+
+static inline bool cpu_has_vmx_ept_1g_page(void)
+{
+	return vmx_capability.ept & VMX_EPT_1GB_PAGE_BIT;
 }
 
-static inline int cpu_has_vmx_invept_individual_addr(void)
+static inline bool cpu_has_vmx_invept_individual_addr(void)
 {
-	return !!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT);
+	return vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT;
 }
 
-static inline int cpu_has_vmx_invept_context(void)
+static inline bool cpu_has_vmx_invept_context(void)
 {
-	return !!(vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT);
+	return vmx_capability.ept & VMX_EPT_EXTENT_CONTEXT_BIT;
 }
 
-static inline int cpu_has_vmx_invept_global(void)
+static inline bool cpu_has_vmx_invept_global(void)
 {
-	return !!(vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT);
+	return vmx_capability.ept & VMX_EPT_EXTENT_GLOBAL_BIT;
 }
 
-static inline int cpu_has_vmx_ept(void)
+static inline bool cpu_has_vmx_ept(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
 		SECONDARY_EXEC_ENABLE_EPT;
 }
 
-static inline int cpu_has_vmx_unrestricted_guest(void)
+static inline bool cpu_has_vmx_unrestricted_guest(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
 		SECONDARY_EXEC_UNRESTRICTED_GUEST;
 }
 
-static inline int cpu_has_vmx_ple(void)
+static inline bool cpu_has_vmx_ple(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
 		SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 }
 
-static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
+static inline bool vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
-	return flexpriority_enabled &&
-		(cpu_has_vmx_virtualize_apic_accesses()) &&
-		(irqchip_in_kernel(kvm));
+	return flexpriority_enabled && irqchip_in_kernel(kvm);
 }
 
-static inline int cpu_has_vmx_vpid(void)
+static inline bool cpu_has_vmx_vpid(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
 		SECONDARY_EXEC_ENABLE_VPID;
 }
 
-static inline int cpu_has_virtual_nmis(void)
+static inline bool cpu_has_vmx_rdtscp(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_RDTSCP;
+}
+
+static inline bool cpu_has_virtual_nmis(void)
 {
 	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
 }
@@ -551,35 +588,71 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 {
 	u32 eb;
 
-	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR);
-	if (!vcpu->fpu_active)
-		eb |= 1u << NM_VECTOR;
-	/*
-	 * Unconditionally intercept #DB so we can maintain dr6 without
-	 * reading it every exit.
-	 */
-	eb |= 1u << DB_VECTOR;
-	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
-		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
-			eb |= 1u << BP_VECTOR;
-	}
+	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) |
+	     (1u << NM_VECTOR) | (1u << DB_VECTOR);
+	if ((vcpu->guest_debug &
+	     (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) ==
+	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP))
+		eb |= 1u << BP_VECTOR;
 	if (to_vmx(vcpu)->rmode.vm86_active)
 		eb = ~0;
 	if (enable_ept)
 		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
+	if (vcpu->fpu_active)
+		eb &= ~(1u << NM_VECTOR);
 	vmcs_write32(EXCEPTION_BITMAP, eb);
 }
 
+static void clear_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr)
+{
+	unsigned i;
+	struct msr_autoload *m = &vmx->msr_autoload;
+
+	for (i = 0; i < m->nr; ++i)
+		if (m->guest[i].index == msr)
+			break;
+
+	if (i == m->nr)
+		return;
+	--m->nr;
+	m->guest[i] = m->guest[m->nr];
+	m->host[i] = m->host[m->nr];
+	vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
+	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
+}
+
+static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
+				  u64 guest_val, u64 host_val)
+{
+	unsigned i;
+	struct msr_autoload *m = &vmx->msr_autoload;
+
+	for (i = 0; i < m->nr; ++i)
+		if (m->guest[i].index == msr)
+			break;
+
+	if (i == m->nr) {
+		++m->nr;
+		vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, m->nr);
+		vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, m->nr);
+	}
+
+	m->guest[i].index = msr;
+	m->guest[i].value = guest_val;
+	m->host[i].index = msr;
+	m->host[i].value = host_val;
+}
+
 static void reload_tss(void)
 {
 	/*
 	 * VT restores TR but not its size.  Useless.
 	 */
-	struct descriptor_table gdt;
+	struct desc_ptr gdt;
 	struct desc_struct *descs;
 
-	kvm_get_gdt(&gdt);
-	descs = (void *)gdt.base;
+	native_store_gdt(&gdt);
+	descs = (void *)gdt.address;
 	descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
 	load_TR_desc();
 }
@@ -589,7 +662,7 @@ static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 	u64 guest_efer;
 	u64 ignore_bits;
 
-	guest_efer = vmx->vcpu.arch.shadow_efer;
+	guest_efer = vmx->vcpu.arch.efer;
 
 	/*
 	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
@@ -606,9 +679,57 @@ static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 	guest_efer |= host_efer & ignore_bits;
 	vmx->guest_msrs[efer_offset].data = guest_efer;
 	vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
+
+	clear_atomic_switch_msr(vmx, MSR_EFER);
+	/* On ept, can't emulate nx, and must switch nx atomically */
+	if (enable_ept && ((vmx->vcpu.arch.efer ^ host_efer) & EFER_NX)) {
+		guest_efer = vmx->vcpu.arch.efer;
+		if (!(guest_efer & EFER_LMA))
+			guest_efer &= ~EFER_LME;
+		add_atomic_switch_msr(vmx, MSR_EFER, guest_efer, host_efer);
+		return false;
+	}
+
 	return true;
 }
 
+static unsigned long segment_base(u16 selector)
+{
+	struct desc_ptr gdt;
+	struct desc_struct *d;
+	unsigned long table_base;
+	unsigned long v;
+
+	if (!(selector & ~3))
+		return 0;
+
+	native_store_gdt(&gdt);
+	table_base = gdt.address;
+
+	if (selector & 4) {           /* from ldt */
+		u16 ldt_selector = kvm_read_ldt();
+
+		if (!(ldt_selector & ~3))
+			return 0;
+
+		table_base = segment_base(ldt_selector);
+	}
+	d = (struct desc_struct *)(table_base + (selector & ~7));
+	v = get_desc_base(d);
+#ifdef CONFIG_X86_64
+       if (d->s == 0 && (d->type == 2 || d->type == 9 || d->type == 11))
+               v |= ((unsigned long)((struct ldttss_desc64 *)d)->base3) << 32;
+#endif
+	return v;
+}
+
+static inline unsigned long kvm_read_tr_base(void)
+{
+	u16 tr;
+	asm("str %0" : "=g"(tr));
+	return segment_base(tr);
+}
+
 static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -733,7 +854,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	}
 
 	if (vcpu->cpu != cpu) {
-		struct descriptor_table dt;
+		struct desc_ptr dt;
 		unsigned long sysenter_esp;
 
 		vcpu->cpu = cpu;
@@ -742,8 +863,8 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 * processors.
 		 */
 		vmcs_writel(HOST_TR_BASE, kvm_read_tr_base()); /* 22.2.4 */
-		kvm_get_gdt(&dt);
-		vmcs_writel(HOST_GDTR_BASE, dt.base);   /* 22.2.4 */
+		native_store_gdt(&dt);
+		vmcs_writel(HOST_GDTR_BASE, dt.address);   /* 22.2.4 */
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
 		vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
@@ -767,38 +888,51 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
 
 static void vmx_fpu_activate(struct kvm_vcpu *vcpu)
 {
+	ulong cr0;
+
 	if (vcpu->fpu_active)
 		return;
 	vcpu->fpu_active = 1;
-	vmcs_clear_bits(GUEST_CR0, X86_CR0_TS);
-	if (vcpu->arch.cr0 & X86_CR0_TS)
-		vmcs_set_bits(GUEST_CR0, X86_CR0_TS);
+	cr0 = vmcs_readl(GUEST_CR0);
+	cr0 &= ~(X86_CR0_TS | X86_CR0_MP);
+	cr0 |= kvm_read_cr0_bits(vcpu, X86_CR0_TS | X86_CR0_MP);
+	vmcs_writel(GUEST_CR0, cr0);
 	update_exception_bitmap(vcpu);
+	vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
+	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
 }
 
+static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
+
 static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 {
-	if (!vcpu->fpu_active)
-		return;
-	vcpu->fpu_active = 0;
-	vmcs_set_bits(GUEST_CR0, X86_CR0_TS);
+	vmx_decache_cr0_guest_bits(vcpu);
+	vmcs_set_bits(GUEST_CR0, X86_CR0_TS | X86_CR0_MP);
 	update_exception_bitmap(vcpu);
+	vcpu->arch.cr0_guest_owned_bits = 0;
+	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
+	vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
 }
 
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
-	unsigned long rflags;
+	unsigned long rflags, save_rflags;
 
 	rflags = vmcs_readl(GUEST_RFLAGS);
-	if (to_vmx(vcpu)->rmode.vm86_active)
-		rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+	if (to_vmx(vcpu)->rmode.vm86_active) {
+		rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+		save_rflags = to_vmx(vcpu)->rmode.save_rflags;
+		rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
+	}
 	return rflags;
 }
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
-	if (to_vmx(vcpu)->rmode.vm86_active)
+	if (to_vmx(vcpu)->rmode.vm86_active) {
+		to_vmx(vcpu)->rmode.save_rflags = rflags;
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
+	}
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
 
@@ -808,9 +942,9 @@ static u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 	int ret = 0;
 
 	if (interruptibility & GUEST_INTR_STATE_STI)
-		ret |= X86_SHADOW_INT_STI;
+		ret |= KVM_X86_SHADOW_INT_STI;
 	if (interruptibility & GUEST_INTR_STATE_MOV_SS)
-		ret |= X86_SHADOW_INT_MOV_SS;
+		ret |= KVM_X86_SHADOW_INT_MOV_SS;
 
 	return ret & mask;
 }
@@ -822,9 +956,9 @@ static void vmx_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 
 	interruptibility &= ~(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS);
 
-	if (mask & X86_SHADOW_INT_MOV_SS)
+	if (mask & KVM_X86_SHADOW_INT_MOV_SS)
 		interruptibility |= GUEST_INTR_STATE_MOV_SS;
-	if (mask & X86_SHADOW_INT_STI)
+	else if (mask & KVM_X86_SHADOW_INT_STI)
 		interruptibility |= GUEST_INTR_STATE_STI;
 
 	if ((interruptibility != interruptibility_old))
@@ -844,7 +978,8 @@ static void skip_emulated_instruction(struct kvm_vcpu *vcpu)
 }
 
 static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
-				bool has_error_code, u32 error_code)
+				bool has_error_code, u32 error_code,
+				bool reinject)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 intr_info = nr | INTR_INFO_VALID_MASK;
@@ -878,6 +1013,11 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 }
 
+static bool vmx_rdtscp_supported(void)
+{
+	return cpu_has_vmx_rdtscp();
+}
+
 /*
  * Swap MSR entry in host/guest MSR entry array.
  */
@@ -913,12 +1053,15 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 		index = __find_msr_index(vmx, MSR_CSTAR);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
+		index = __find_msr_index(vmx, MSR_TSC_AUX);
+		if (index >= 0 && vmx->rdtscp_enabled)
+			move_msr_up(vmx, index, save_nmsrs++);
 		/*
 		 * MSR_K6_STAR is only needed on long mode guests, and only
 		 * if efer.sce is enabled.
 		 */
 		index = __find_msr_index(vmx, MSR_K6_STAR);
-		if ((index >= 0) && (vmx->vcpu.arch.shadow_efer & EFER_SCE))
+		if ((index >= 0) && (vmx->vcpu.arch.efer & EFER_SCE))
 			move_msr_up(vmx, index, save_nmsrs++);
 	}
 #endif
@@ -1002,6 +1145,10 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	case MSR_IA32_SYSENTER_ESP:
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
+	case MSR_TSC_AUX:
+		if (!to_vmx(vcpu)->rdtscp_enabled)
+			return 1;
+		/* Otherwise falls through */
 	default:
 		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
@@ -1065,7 +1212,15 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 			vcpu->arch.pat = data;
 			break;
 		}
-		/* Otherwise falls through to kvm_set_msr_common */
+		ret = kvm_set_msr_common(vcpu, msr_index, data);
+		break;
+	case MSR_TSC_AUX:
+		if (!vmx->rdtscp_enabled)
+			return 1;
+		/* Check reserved bit, higher 32 bits should be zero */
+		if ((data >> 32) != 0)
+			return 1;
+		/* Otherwise falls through */
 	default:
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
@@ -1118,9 +1273,16 @@ static __init int vmx_disabled_by_bios(void)
 	u64 msr;
 
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
-	return (msr & (FEATURE_CONTROL_LOCKED |
-		       FEATURE_CONTROL_VMXON_ENABLED))
-	    == FEATURE_CONTROL_LOCKED;
+	if (msr & FEATURE_CONTROL_LOCKED) {
+		if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX)
+			&& tboot_enabled())
+			return 1;
+		if (!(msr & FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX)
+			&& !tboot_enabled())
+			return 1;
+	}
+
+	return 0;
 	/* locked but not enabled */
 }
 
@@ -1128,21 +1290,23 @@ static int hardware_enable(void *garbage)
 {
 	int cpu = raw_smp_processor_id();
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
-	u64 old;
+	u64 old, test_bits;
 
 	if (read_cr4() & X86_CR4_VMXE)
 		return -EBUSY;
 
 	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
-	if ((old & (FEATURE_CONTROL_LOCKED |
-		    FEATURE_CONTROL_VMXON_ENABLED))
-	    != (FEATURE_CONTROL_LOCKED |
-		FEATURE_CONTROL_VMXON_ENABLED))
+
+	test_bits = FEATURE_CONTROL_LOCKED;
+	test_bits |= FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX;
+	if (tboot_enabled())
+		test_bits |= FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX;
+
+	if ((old & test_bits) != test_bits) {
 		/* enable and lock */
-		wrmsrl(MSR_IA32_FEATURE_CONTROL, old |
-		       FEATURE_CONTROL_LOCKED |
-		       FEATURE_CONTROL_VMXON_ENABLED);
+		wrmsrl(MSR_IA32_FEATURE_CONTROL, old | test_bits);
+	}
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
 	asm volatile (ASM_VMX_VMXON_RAX
 		      : : "a"(&phys_addr), "m"(phys_addr)
@@ -1224,6 +1388,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	      CPU_BASED_USE_IO_BITMAPS |
 	      CPU_BASED_MOV_DR_EXITING |
 	      CPU_BASED_USE_TSC_OFFSETING |
+	      CPU_BASED_MWAIT_EXITING |
+	      CPU_BASED_MONITOR_EXITING |
 	      CPU_BASED_INVLPG_EXITING;
 	opt = CPU_BASED_TPR_SHADOW |
 	      CPU_BASED_USE_MSR_BITMAPS |
@@ -1243,7 +1409,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 			SECONDARY_EXEC_ENABLE_VPID |
 			SECONDARY_EXEC_ENABLE_EPT |
 			SECONDARY_EXEC_UNRESTRICTED_GUEST |
-			SECONDARY_EXEC_PAUSE_LOOP_EXITING;
+			SECONDARY_EXEC_PAUSE_LOOP_EXITING |
+			SECONDARY_EXEC_RDTSCP;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -1429,8 +1596,8 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
-	flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
+	flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+	flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
 	vmcs_writel(GUEST_RFLAGS, flags);
 
 	vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1457,8 +1624,12 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 static gva_t rmode_tss_base(struct kvm *kvm)
 {
 	if (!kvm->arch.tss_addr) {
-		gfn_t base_gfn = kvm->memslots[0].base_gfn +
-				 kvm->memslots[0].npages - 3;
+		struct kvm_memslots *slots;
+		gfn_t base_gfn;
+
+		slots = kvm_memslots(kvm);
+		base_gfn = kvm->memslots->memslots[0].base_gfn +
+				 kvm->memslots->memslots[0].npages - 3;
 		return base_gfn << PAGE_SHIFT;
 	}
 	return kvm->arch.tss_addr;
@@ -1499,8 +1670,7 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	vmx->rmode.save_iopl
-		= (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+	vmx->rmode.save_rflags = flags;
 
 	flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 
@@ -1544,9 +1714,7 @@ static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 	 * of this msr depends on is_long_mode().
 	 */
 	vmx_load_host_state(to_vmx(vcpu));
-	vcpu->arch.shadow_efer = efer;
-	if (!msr)
-		return;
+	vcpu->arch.efer = efer;
 	if (efer & EFER_LMA) {
 		vmcs_write32(VM_ENTRY_CONTROLS,
 			     vmcs_read32(VM_ENTRY_CONTROLS) |
@@ -1576,17 +1744,15 @@ static void enter_lmode(struct kvm_vcpu *vcpu)
 			     (guest_tr_ar & ~AR_TYPE_MASK)
 			     | AR_TYPE_BUSY_64_TSS);
 	}
-	vcpu->arch.shadow_efer |= EFER_LMA;
-	vmx_set_efer(vcpu, vcpu->arch.shadow_efer);
+	vmx_set_efer(vcpu, vcpu->arch.efer | EFER_LMA);
 }
 
 static void exit_lmode(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.shadow_efer &= ~EFER_LMA;
-
 	vmcs_write32(VM_ENTRY_CONTROLS,
 		     vmcs_read32(VM_ENTRY_CONTROLS)
 		     & ~VM_ENTRY_IA32E_MODE);
+	vmx_set_efer(vcpu, vcpu->arch.efer & ~EFER_LMA);
 }
 
 #endif
@@ -1598,10 +1764,20 @@ static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
+static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
+{
+	ulong cr0_guest_owned_bits = vcpu->arch.cr0_guest_owned_bits;
+
+	vcpu->arch.cr0 &= ~cr0_guest_owned_bits;
+	vcpu->arch.cr0 |= vmcs_readl(GUEST_CR0) & cr0_guest_owned_bits;
+}
+
 static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 {
-	vcpu->arch.cr4 &= KVM_GUEST_CR4_MASK;
-	vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & ~KVM_GUEST_CR4_MASK;
+	ulong cr4_guest_owned_bits = vcpu->arch.cr4_guest_owned_bits;
+
+	vcpu->arch.cr4 &= ~cr4_guest_owned_bits;
+	vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & cr4_guest_owned_bits;
 }
 
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
@@ -1646,7 +1822,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			     (CPU_BASED_CR3_LOAD_EXITING |
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, vcpu->arch.cr4);
+		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
@@ -1654,23 +1830,13 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			     ~(CPU_BASED_CR3_LOAD_EXITING |
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, vcpu->arch.cr4);
+		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
 	}
 
 	if (!(cr0 & X86_CR0_WP))
 		*hw_cr0 &= ~X86_CR0_WP;
 }
 
-static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
-					struct kvm_vcpu *vcpu)
-{
-	if (!is_paging(vcpu)) {
-		*hw_cr4 &= ~X86_CR4_PAE;
-		*hw_cr4 |= X86_CR4_PSE;
-	} else if (!(vcpu->arch.cr4 & X86_CR4_PAE))
-		*hw_cr4 &= ~X86_CR4_PAE;
-}
-
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -1682,8 +1848,6 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	else
 		hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON;
 
-	vmx_fpu_deactivate(vcpu);
-
 	if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
 		enter_pmode(vcpu);
 
@@ -1691,7 +1855,7 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 		enter_rmode(vcpu);
 
 #ifdef CONFIG_X86_64
-	if (vcpu->arch.shadow_efer & EFER_LME) {
+	if (vcpu->arch.efer & EFER_LME) {
 		if (!is_paging(vcpu) && (cr0 & X86_CR0_PG))
 			enter_lmode(vcpu);
 		if (is_paging(vcpu) && !(cr0 & X86_CR0_PG))
@@ -1702,12 +1866,12 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	if (enable_ept)
 		ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
 
+	if (!vcpu->fpu_active)
+		hw_cr0 |= X86_CR0_TS | X86_CR0_MP;
+
 	vmcs_writel(CR0_READ_SHADOW, cr0);
 	vmcs_writel(GUEST_CR0, hw_cr0);
 	vcpu->arch.cr0 = cr0;
-
-	if (!(cr0 & X86_CR0_TS) || !(cr0 & X86_CR0_PE))
-		vmx_fpu_activate(vcpu);
 }
 
 static u64 construct_eptp(unsigned long root_hpa)
@@ -1738,8 +1902,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 	vmx_flush_tlb(vcpu);
 	vmcs_writel(GUEST_CR3, guest_cr3);
-	if (vcpu->arch.cr0 & X86_CR0_PE)
-		vmx_fpu_deactivate(vcpu);
 }
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -1748,8 +1910,14 @@ static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 		    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
 
 	vcpu->arch.cr4 = cr4;
-	if (enable_ept)
-		ept_update_paging_mode_cr4(&hw_cr4, vcpu);
+	if (enable_ept) {
+		if (!is_paging(vcpu)) {
+			hw_cr4 &= ~X86_CR4_PAE;
+			hw_cr4 |= X86_CR4_PSE;
+		} else if (!(cr4 & X86_CR4_PAE)) {
+			hw_cr4 &= ~X86_CR4_PAE;
+		}
+	}
 
 	vmcs_writel(CR4_READ_SHADOW, cr4);
 	vmcs_writel(GUEST_CR4, hw_cr4);
@@ -1787,7 +1955,7 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 
 static int vmx_get_cpl(struct kvm_vcpu *vcpu)
 {
-	if (!(vcpu->arch.cr0 & X86_CR0_PE)) /* if real mode */
+	if (!is_protmode(vcpu))
 		return 0;
 
 	if (vmx_get_rflags(vcpu) & X86_EFLAGS_VM) /* if virtual 8086 */
@@ -1870,28 +2038,28 @@ static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 	*l = (ar >> 13) & 1;
 }
 
-static void vmx_get_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void vmx_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
-	dt->limit = vmcs_read32(GUEST_IDTR_LIMIT);
-	dt->base = vmcs_readl(GUEST_IDTR_BASE);
+	dt->size = vmcs_read32(GUEST_IDTR_LIMIT);
+	dt->address = vmcs_readl(GUEST_IDTR_BASE);
 }
 
-static void vmx_set_idt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void vmx_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
-	vmcs_write32(GUEST_IDTR_LIMIT, dt->limit);
-	vmcs_writel(GUEST_IDTR_BASE, dt->base);
+	vmcs_write32(GUEST_IDTR_LIMIT, dt->size);
+	vmcs_writel(GUEST_IDTR_BASE, dt->address);
 }
 
-static void vmx_get_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void vmx_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
-	dt->limit = vmcs_read32(GUEST_GDTR_LIMIT);
-	dt->base = vmcs_readl(GUEST_GDTR_BASE);
+	dt->size = vmcs_read32(GUEST_GDTR_LIMIT);
+	dt->address = vmcs_readl(GUEST_GDTR_BASE);
 }
 
-static void vmx_set_gdt(struct kvm_vcpu *vcpu, struct descriptor_table *dt)
+static void vmx_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)
 {
-	vmcs_write32(GUEST_GDTR_LIMIT, dt->limit);
-	vmcs_writel(GUEST_GDTR_BASE, dt->base);
+	vmcs_write32(GUEST_GDTR_LIMIT, dt->size);
+	vmcs_writel(GUEST_GDTR_BASE, dt->address);
 }
 
 static bool rmode_segment_valid(struct kvm_vcpu *vcpu, int seg)
@@ -2042,7 +2210,7 @@ static bool cs_ss_rpl_check(struct kvm_vcpu *vcpu)
 static bool guest_state_valid(struct kvm_vcpu *vcpu)
 {
 	/* real mode guest state checks */
-	if (!(vcpu->arch.cr0 & X86_CR0_PE)) {
+	if (!is_protmode(vcpu)) {
 		if (!rmode_segment_valid(vcpu, VCPU_SREG_CS))
 			return false;
 		if (!rmode_segment_valid(vcpu, VCPU_SREG_SS))
@@ -2175,7 +2343,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
-	down_write(&kvm->slots_lock);
+	mutex_lock(&kvm->slots_lock);
 	if (kvm->arch.apic_access_page)
 		goto out;
 	kvm_userspace_mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT;
@@ -2188,7 +2356,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
 
 	kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
 out:
-	up_write(&kvm->slots_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return r;
 }
 
@@ -2197,7 +2365,7 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
-	down_write(&kvm->slots_lock);
+	mutex_lock(&kvm->slots_lock);
 	if (kvm->arch.ept_identity_pagetable)
 		goto out;
 	kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
@@ -2212,7 +2380,7 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
 			kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
 out:
-	up_write(&kvm->slots_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return r;
 }
 
@@ -2232,6 +2400,16 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	spin_unlock(&vmx_vpid_lock);
 }
 
+static void free_vpid(struct vcpu_vmx *vmx)
+{
+	if (!enable_vpid)
+		return;
+	spin_lock(&vmx_vpid_lock);
+	if (vmx->vpid != 0)
+		__clear_bit(vmx->vpid, vmx_vpid_bitmap);
+	spin_unlock(&vmx_vpid_lock);
+}
+
 static void __vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, u32 msr)
 {
 	int f = sizeof(unsigned long);
@@ -2270,7 +2448,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	u32 junk;
 	u64 host_pat, tsc_this, tsc_base;
 	unsigned long a;
-	struct descriptor_table dt;
+	struct desc_ptr dt;
 	int i;
 	unsigned long kvm_vmx_return;
 	u32 exec_control;
@@ -2351,14 +2529,16 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
 
-	kvm_get_idt(&dt);
-	vmcs_writel(HOST_IDTR_BASE, dt.base);   /* 22.2.4 */
+	native_store_idt(&dt);
+	vmcs_writel(HOST_IDTR_BASE, dt.address);   /* 22.2.4 */
 
 	asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
 	vmcs_writel(HOST_RIP, kvm_vmx_return); /* 22.2.5 */
 	vmcs_write32(VM_EXIT_MSR_STORE_COUNT, 0);
 	vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, 0);
+	vmcs_write64(VM_EXIT_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.host));
 	vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, 0);
+	vmcs_write64(VM_ENTRY_MSR_LOAD_ADDR, __pa(vmx->msr_autoload.guest));
 
 	rdmsr(MSR_IA32_SYSENTER_CS, host_sysenter_cs, junk);
 	vmcs_write32(HOST_IA32_SYSENTER_CS, host_sysenter_cs);
@@ -2384,14 +2564,12 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	for (i = 0; i < NR_VMX_MSR; ++i) {
 		u32 index = vmx_msr_index[i];
 		u32 data_low, data_high;
-		u64 data;
 		int j = vmx->nmsrs;
 
 		if (rdmsr_safe(index, &data_low, &data_high) < 0)
 			continue;
 		if (wrmsr_safe(index, data_low, data_high) < 0)
 			continue;
-		data = data_low | ((u64)data_high << 32);
 		vmx->guest_msrs[j].index = i;
 		vmx->guest_msrs[j].data = 0;
 		vmx->guest_msrs[j].mask = -1ull;
@@ -2404,7 +2582,10 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_write32(VM_ENTRY_CONTROLS, vmcs_config.vmentry_ctrl);
 
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
-	vmcs_writel(CR4_GUEST_HOST_MASK, KVM_GUEST_CR4_MASK);
+	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS;
+	if (enable_ept)
+		vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE;
+	vmcs_writel(CR4_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr4_guest_owned_bits);
 
 	tsc_base = vmx->vcpu.kvm->arch.vm_init_tsc;
 	rdtscll(tsc_this);
@@ -2429,10 +2610,10 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u64 msr;
-	int ret;
+	int ret, idx;
 
 	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	if (!init_rmode(vmx->vcpu.kvm)) {
 		ret = -ENOMEM;
 		goto out;
@@ -2526,7 +2707,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
 
 	vmx->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
-	vmx_set_cr0(&vmx->vcpu, vmx->vcpu.arch.cr0); /* enter rmode */
+	vmx_set_cr0(&vmx->vcpu, kvm_read_cr0(vcpu)); /* enter rmode */
 	vmx_set_cr4(&vmx->vcpu, 0);
 	vmx_set_efer(&vmx->vcpu, 0);
 	vmx_fpu_activate(&vmx->vcpu);
@@ -2540,7 +2721,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx->emulation_required = 0;
 
 out:
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	return ret;
 }
 
@@ -2638,8 +2819,7 @@ static int vmx_nmi_allowed(struct kvm_vcpu *vcpu)
 		return 0;
 
 	return	!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
-			(GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS |
-				GUEST_INTR_STATE_NMI));
+			(GUEST_INTR_STATE_MOV_SS | GUEST_INTR_STATE_NMI));
 }
 
 static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
@@ -2717,6 +2897,12 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
 		kvm_queue_exception(vcpu, vec);
 		return 1;
 	case BP_VECTOR:
+		/*
+		 * Update instruction length as we may reinject the exception
+		 * from user space while in guest debugging mode.
+		 */
+		to_vmx(vcpu)->vcpu.arch.event_exit_inst_len =
+			vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			return 0;
 		/* fall through */
@@ -2839,6 +3025,13 @@ static int handle_exception(struct kvm_vcpu *vcpu)
 		kvm_run->debug.arch.dr7 = vmcs_readl(GUEST_DR7);
 		/* fall through */
 	case BP_VECTOR:
+		/*
+		 * Update instruction length as we may reinject #BP from
+		 * user space while in guest debugging mode. Reading it for
+		 * #DB as well causes no harm, it is not used in that case.
+		 */
+		vmx->vcpu.arch.event_exit_inst_len =
+			vmcs_read32(VM_EXIT_INSTRUCTION_LEN);
 		kvm_run->exit_reason = KVM_EXIT_DEBUG;
 		kvm_run->debug.arch.pc = vmcs_readl(GUEST_CS_BASE) + rip;
 		kvm_run->debug.arch.exception = ex_no;
@@ -2870,22 +3063,20 @@ static int handle_io(struct kvm_vcpu *vcpu)
 	int size, in, string;
 	unsigned port;
 
-	++vcpu->stat.io_exits;
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	string = (exit_qualification & 16) != 0;
+	in = (exit_qualification & 8) != 0;
 
-	if (string) {
-		if (emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO)
-			return 0;
-		return 1;
-	}
+	++vcpu->stat.io_exits;
 
-	size = (exit_qualification & 7) + 1;
-	in = (exit_qualification & 8) != 0;
-	port = exit_qualification >> 16;
+	if (string || in)
+		return !(emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO);
 
+	port = exit_qualification >> 16;
+	size = (exit_qualification & 7) + 1;
 	skip_emulated_instruction(vcpu);
-	return kvm_emulate_pio(vcpu, in, size, port);
+
+	return kvm_fast_pio_out(vcpu, size, port);
 }
 
 static void
@@ -2940,11 +3131,10 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 		};
 		break;
 	case 2: /* clts */
-		vmx_fpu_deactivate(vcpu);
-		vcpu->arch.cr0 &= ~X86_CR0_TS;
-		vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
-		vmx_fpu_activate(vcpu);
+		vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
+		trace_kvm_cr_write(0, kvm_read_cr0(vcpu));
 		skip_emulated_instruction(vcpu);
+		vmx_fpu_activate(vcpu);
 		return 1;
 	case 1: /*mov from cr*/
 		switch (cr) {
@@ -2962,7 +3152,9 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 		}
 		break;
 	case 3: /* lmsw */
-		kvm_lmsw(vcpu, (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f);
+		val = (exit_qualification >> LMSW_SOURCE_DATA_SHIFT) & 0x0f;
+		trace_kvm_cr_write(0, (kvm_read_cr0(vcpu) & ~0xful) | val);
+		kvm_lmsw(vcpu, val);
 
 		skip_emulated_instruction(vcpu);
 		return 1;
@@ -2978,9 +3170,9 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 static int handle_dr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
-	unsigned long val;
 	int dr, reg;
 
+	/* Do not handle if the CPL > 0, will trigger GP on re-entry */
 	if (!kvm_require_cpl(vcpu, 0))
 		return 1;
 	dr = vmcs_readl(GUEST_DR7);
@@ -3012,57 +3204,20 @@ static int handle_dr(struct kvm_vcpu *vcpu)
 	dr = exit_qualification & DEBUG_REG_ACCESS_NUM;
 	reg = DEBUG_REG_ACCESS_REG(exit_qualification);
 	if (exit_qualification & TYPE_MOV_FROM_DR) {
-		switch (dr) {
-		case 0 ... 3:
-			val = vcpu->arch.db[dr];
-			break;
-		case 6:
-			val = vcpu->arch.dr6;
-			break;
-		case 7:
-			val = vcpu->arch.dr7;
-			break;
-		default:
-			val = 0;
-		}
-		kvm_register_write(vcpu, reg, val);
-	} else {
-		val = vcpu->arch.regs[reg];
-		switch (dr) {
-		case 0 ... 3:
-			vcpu->arch.db[dr] = val;
-			if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
-				vcpu->arch.eff_db[dr] = val;
-			break;
-		case 4 ... 5:
-			if (vcpu->arch.cr4 & X86_CR4_DE)
-				kvm_queue_exception(vcpu, UD_VECTOR);
-			break;
-		case 6:
-			if (val & 0xffffffff00000000ULL) {
-				kvm_queue_exception(vcpu, GP_VECTOR);
-				break;
-			}
-			vcpu->arch.dr6 = (val & DR6_VOLATILE) | DR6_FIXED_1;
-			break;
-		case 7:
-			if (val & 0xffffffff00000000ULL) {
-				kvm_queue_exception(vcpu, GP_VECTOR);
-				break;
-			}
-			vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
-			if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
-				vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
-				vcpu->arch.switch_db_regs =
-					(val & DR7_BP_EN_MASK);
-			}
-			break;
-		}
-	}
+		unsigned long val;
+		if (!kvm_get_dr(vcpu, dr, &val))
+			kvm_register_write(vcpu, reg, val);
+	} else
+		kvm_set_dr(vcpu, dr, vcpu->arch.regs[reg]);
 	skip_emulated_instruction(vcpu);
 	return 1;
 }
 
+static void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val)
+{
+	vmcs_writel(GUEST_DR7, val);
+}
+
 static int handle_cpuid(struct kvm_vcpu *vcpu)
 {
 	kvm_emulate_cpuid(vcpu);
@@ -3075,6 +3230,7 @@ static int handle_rdmsr(struct kvm_vcpu *vcpu)
 	u64 data;
 
 	if (vmx_get_msr(vcpu, ecx, &data)) {
+		trace_kvm_msr_read_ex(ecx);
 		kvm_inject_gp(vcpu, 0);
 		return 1;
 	}
@@ -3094,13 +3250,13 @@ static int handle_wrmsr(struct kvm_vcpu *vcpu)
 	u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(vcpu->arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	trace_kvm_msr_write(ecx, data);
-
 	if (vmx_set_msr(vcpu, ecx, data) != 0) {
+		trace_kvm_msr_write_ex(ecx, data);
 		kvm_inject_gp(vcpu, 0);
 		return 1;
 	}
 
+	trace_kvm_msr_write(ecx, data);
 	skip_emulated_instruction(vcpu);
 	return 1;
 }
@@ -3193,6 +3349,8 @@ static int handle_task_switch(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long exit_qualification;
+	bool has_error_code = false;
+	u32 error_code = 0;
 	u16 tss_selector;
 	int reason, type, idt_v;
 
@@ -3215,6 +3373,13 @@ static int handle_task_switch(struct kvm_vcpu *vcpu)
 			kvm_clear_interrupt_queue(vcpu);
 			break;
 		case INTR_TYPE_HARD_EXCEPTION:
+			if (vmx->idt_vectoring_info &
+			    VECTORING_INFO_DELIVER_CODE_MASK) {
+				has_error_code = true;
+				error_code =
+					vmcs_read32(IDT_VECTORING_ERROR_CODE);
+			}
+			/* fall through */
 		case INTR_TYPE_SOFT_EXCEPTION:
 			kvm_clear_exception_queue(vcpu);
 			break;
@@ -3229,8 +3394,13 @@ static int handle_task_switch(struct kvm_vcpu *vcpu)
 		       type != INTR_TYPE_NMI_INTR))
 		skip_emulated_instruction(vcpu);
 
-	if (!kvm_task_switch(vcpu, tss_selector, reason))
+	if (kvm_task_switch(vcpu, tss_selector, reason,
+				has_error_code, error_code) == EMULATE_FAIL) {
+		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		vcpu->run->internal.ndata = 0;
 		return 0;
+	}
 
 	/* clear all local breakpoint enable flags */
 	vmcs_writel(GUEST_DR7, vmcs_readl(GUEST_DR7) & ~55);
@@ -3385,7 +3555,6 @@ static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 		}
 
 		if (err != EMULATE_DONE) {
-			kvm_report_emulation_failure(vcpu, "emulation failure");
 			vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 			vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
 			vcpu->run->internal.ndata = 0;
@@ -3416,6 +3585,12 @@ static int handle_pause(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+static int handle_invalid_op(struct kvm_vcpu *vcpu)
+{
+	kvm_queue_exception(vcpu, UD_VECTOR);
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -3453,6 +3628,8 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
 	[EXIT_REASON_EPT_MISCONFIG]           = handle_ept_misconfig,
 	[EXIT_REASON_PAUSE_INSTRUCTION]       = handle_pause,
+	[EXIT_REASON_MWAIT_INSTRUCTION]	      = handle_invalid_op,
+	[EXIT_REASON_MONITOR_INSTRUCTION]     = handle_invalid_op,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -3468,7 +3645,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 	u32 exit_reason = vmx->exit_reason;
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
-	trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
+	trace_kvm_exit(exit_reason, vcpu);
 
 	/* If guest state is invalid, start emulating */
 	if (vmx->emulation_required && emulate_invalid_guest_state)
@@ -3553,8 +3730,11 @@ static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 
 	/* We need to handle NMIs before interrupts are enabled */
 	if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
-	    (exit_intr_info & INTR_INFO_VALID_MASK))
+	    (exit_intr_info & INTR_INFO_VALID_MASK)) {
+		kvm_before_handle_nmi(&vmx->vcpu);
 		asm("int $2");
+		kvm_after_handle_nmi(&vmx->vcpu);
+	}
 
 	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
 
@@ -3686,9 +3866,6 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	vmcs_writel(HOST_CR0, read_cr0());
 
-	if (vcpu->arch.switch_db_regs)
-		set_debugreg(vcpu->arch.dr6, 6);
-
 	asm(
 		/* Store host registers */
 		"push %%"R"dx; push %%"R"bp;"
@@ -3789,9 +3966,6 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 				  | (1 << VCPU_EXREG_PDPTR));
 	vcpu->arch.regs_dirty = 0;
 
-	if (vcpu->arch.switch_db_regs)
-		get_debugreg(vcpu->arch.dr6, 6);
-
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 	if (vmx->rmode.irq.pending)
 		fixup_rmode_irq(vmx);
@@ -3820,10 +3994,7 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	spin_lock(&vmx_vpid_lock);
-	if (vmx->vpid != 0)
-		__clear_bit(vmx->vpid, vmx_vpid_bitmap);
-	spin_unlock(&vmx_vpid_lock);
+	free_vpid(vmx);
 	vmx_free_vmcs(vcpu);
 	kfree(vmx->guest_msrs);
 	kvm_vcpu_uninit(vcpu);
@@ -3885,6 +4056,7 @@ free_msrs:
 uninit_vcpu:
 	kvm_vcpu_uninit(&vmx->vcpu);
 free_vcpu:
+	free_vpid(vmx);
 	kmem_cache_free(kvm_vcpu_cache, vmx);
 	return ERR_PTR(err);
 }
@@ -3920,7 +4092,7 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	 *   b. VT-d with snooping control feature: snooping control feature of
 	 *	VT-d engine can guarantee the cache correctness. Just set it
 	 *	to WB to keep consistent with host. So the same as item 3.
-	 * 3. EPT without VT-d: always map as WB and set IGMT=1 to keep
+	 * 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
 	 *    consistent with host MTRR
 	 */
 	if (is_mmio)
@@ -3931,37 +4103,92 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 		      VMX_EPT_MT_EPTE_SHIFT;
 	else
 		ret = (MTRR_TYPE_WRBACK << VMX_EPT_MT_EPTE_SHIFT)
-			| VMX_EPT_IGMT_BIT;
+			| VMX_EPT_IPAT_BIT;
 
 	return ret;
 }
 
+#define _ER(x) { EXIT_REASON_##x, #x }
+
 static const struct trace_print_flags vmx_exit_reasons_str[] = {
-	{ EXIT_REASON_EXCEPTION_NMI,           "exception" },
-	{ EXIT_REASON_EXTERNAL_INTERRUPT,      "ext_irq" },
-	{ EXIT_REASON_TRIPLE_FAULT,            "triple_fault" },
-	{ EXIT_REASON_NMI_WINDOW,              "nmi_window" },
-	{ EXIT_REASON_IO_INSTRUCTION,          "io_instruction" },
-	{ EXIT_REASON_CR_ACCESS,               "cr_access" },
-	{ EXIT_REASON_DR_ACCESS,               "dr_access" },
-	{ EXIT_REASON_CPUID,                   "cpuid" },
-	{ EXIT_REASON_MSR_READ,                "rdmsr" },
-	{ EXIT_REASON_MSR_WRITE,               "wrmsr" },
-	{ EXIT_REASON_PENDING_INTERRUPT,       "interrupt_window" },
-	{ EXIT_REASON_HLT,                     "halt" },
-	{ EXIT_REASON_INVLPG,                  "invlpg" },
-	{ EXIT_REASON_VMCALL,                  "hypercall" },
-	{ EXIT_REASON_TPR_BELOW_THRESHOLD,     "tpr_below_thres" },
-	{ EXIT_REASON_APIC_ACCESS,             "apic_access" },
-	{ EXIT_REASON_WBINVD,                  "wbinvd" },
-	{ EXIT_REASON_TASK_SWITCH,             "task_switch" },
-	{ EXIT_REASON_EPT_VIOLATION,           "ept_violation" },
+	_ER(EXCEPTION_NMI),
+	_ER(EXTERNAL_INTERRUPT),
+	_ER(TRIPLE_FAULT),
+	_ER(PENDING_INTERRUPT),
+	_ER(NMI_WINDOW),
+	_ER(TASK_SWITCH),
+	_ER(CPUID),
+	_ER(HLT),
+	_ER(INVLPG),
+	_ER(RDPMC),
+	_ER(RDTSC),
+	_ER(VMCALL),
+	_ER(VMCLEAR),
+	_ER(VMLAUNCH),
+	_ER(VMPTRLD),
+	_ER(VMPTRST),
+	_ER(VMREAD),
+	_ER(VMRESUME),
+	_ER(VMWRITE),
+	_ER(VMOFF),
+	_ER(VMON),
+	_ER(CR_ACCESS),
+	_ER(DR_ACCESS),
+	_ER(IO_INSTRUCTION),
+	_ER(MSR_READ),
+	_ER(MSR_WRITE),
+	_ER(MWAIT_INSTRUCTION),
+	_ER(MONITOR_INSTRUCTION),
+	_ER(PAUSE_INSTRUCTION),
+	_ER(MCE_DURING_VMENTRY),
+	_ER(TPR_BELOW_THRESHOLD),
+	_ER(APIC_ACCESS),
+	_ER(EPT_VIOLATION),
+	_ER(EPT_MISCONFIG),
+	_ER(WBINVD),
 	{ -1, NULL }
 };
 
-static bool vmx_gb_page_enable(void)
+#undef _ER
+
+static int vmx_get_lpage_level(void)
+{
+	if (enable_ept && !cpu_has_vmx_ept_1g_page())
+		return PT_DIRECTORY_LEVEL;
+	else
+		/* For shadow and EPT supported 1GB page */
+		return PT_PDPE_LEVEL;
+}
+
+static inline u32 bit(int bitno)
+{
+	return 1 << (bitno & 31);
+}
+
+static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u32 exec_control;
+
+	vmx->rdtscp_enabled = false;
+	if (vmx_rdtscp_supported()) {
+		exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
+		if (exec_control & SECONDARY_EXEC_RDTSCP) {
+			best = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
+			if (best && (best->edx & bit(X86_FEATURE_RDTSCP)))
+				vmx->rdtscp_enabled = true;
+			else {
+				exec_control &= ~SECONDARY_EXEC_RDTSCP;
+				vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
+						exec_control);
+			}
+		}
+	}
+}
+
+static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
-	return false;
 }
 
 static struct kvm_x86_ops vmx_x86_ops = {
@@ -3990,6 +4217,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.set_segment = vmx_set_segment,
 	.get_cpl = vmx_get_cpl,
 	.get_cs_db_l_bits = vmx_get_cs_db_l_bits,
+	.decache_cr0_guest_bits = vmx_decache_cr0_guest_bits,
 	.decache_cr4_guest_bits = vmx_decache_cr4_guest_bits,
 	.set_cr0 = vmx_set_cr0,
 	.set_cr3 = vmx_set_cr3,
@@ -3999,9 +4227,12 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.set_idt = vmx_set_idt,
 	.get_gdt = vmx_get_gdt,
 	.set_gdt = vmx_set_gdt,
+	.set_dr7 = vmx_set_dr7,
 	.cache_reg = vmx_cache_reg,
 	.get_rflags = vmx_get_rflags,
 	.set_rflags = vmx_set_rflags,
+	.fpu_activate = vmx_fpu_activate,
+	.fpu_deactivate = vmx_fpu_deactivate,
 
 	.tlb_flush = vmx_flush_tlb,
 
@@ -4027,7 +4258,13 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.get_mt_mask = vmx_get_mt_mask,
 
 	.exit_reasons_str = vmx_exit_reasons_str,
-	.gb_page_enable = vmx_gb_page_enable,
+	.get_lpage_level = vmx_get_lpage_level,
+
+	.cpuid_update = vmx_cpuid_update,
+
+	.rdtscp_supported = vmx_rdtscp_supported,
+
+	.set_supported_cpuid = vmx_set_supported_cpuid,
 };
 
 static int __init vmx_init(void)
@@ -4075,7 +4312,8 @@ static int __init vmx_init(void)
 
 	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
 
-	r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx), THIS_MODULE);
+	r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx),
+		     __alignof__(struct vcpu_vmx), THIS_MODULE);
 	if (r)
 		goto out3;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1ddcad4..7fa89c3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -38,8 +38,11 @@
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
 #include <linux/user-return-notifier.h>
+#include <linux/srcu.h>
+#include <linux/slab.h>
+#include <linux/perf_event.h>
 #include <trace/events/kvm.h>
-#undef TRACE_INCLUDE_FILE
+
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
@@ -93,16 +96,16 @@ module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
 
 struct kvm_shared_msrs_global {
 	int nr;
-	struct kvm_shared_msr {
-		u32 msr;
-		u64 value;
-	} msrs[KVM_NR_SHARED_MSRS];
+	u32 msrs[KVM_NR_SHARED_MSRS];
 };
 
 struct kvm_shared_msrs {
 	struct user_return_notifier urn;
 	bool registered;
-	u64 current_value[KVM_NR_SHARED_MSRS];
+	struct kvm_shared_msr_values {
+		u64 host;
+		u64 curr;
+	} values[KVM_NR_SHARED_MSRS];
 };
 
 static struct kvm_shared_msrs_global __read_mostly shared_msrs_global;
@@ -147,53 +150,64 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 static void kvm_on_user_return(struct user_return_notifier *urn)
 {
 	unsigned slot;
-	struct kvm_shared_msr *global;
 	struct kvm_shared_msrs *locals
 		= container_of(urn, struct kvm_shared_msrs, urn);
+	struct kvm_shared_msr_values *values;
 
 	for (slot = 0; slot < shared_msrs_global.nr; ++slot) {
-		global = &shared_msrs_global.msrs[slot];
-		if (global->value != locals->current_value[slot]) {
-			wrmsrl(global->msr, global->value);
-			locals->current_value[slot] = global->value;
+		values = &locals->values[slot];
+		if (values->host != values->curr) {
+			wrmsrl(shared_msrs_global.msrs[slot], values->host);
+			values->curr = values->host;
 		}
 	}
 	locals->registered = false;
 	user_return_notifier_unregister(urn);
 }
 
-void kvm_define_shared_msr(unsigned slot, u32 msr)
+static void shared_msr_update(unsigned slot, u32 msr)
 {
-	int cpu;
+	struct kvm_shared_msrs *smsr;
 	u64 value;
 
+	smsr = &__get_cpu_var(shared_msrs);
+	/* only read, and nobody should modify it at this time,
+	 * so don't need lock */
+	if (slot >= shared_msrs_global.nr) {
+		printk(KERN_ERR "kvm: invalid MSR slot!");
+		return;
+	}
+	rdmsrl_safe(msr, &value);
+	smsr->values[slot].host = value;
+	smsr->values[slot].curr = value;
+}
+
+void kvm_define_shared_msr(unsigned slot, u32 msr)
+{
 	if (slot >= shared_msrs_global.nr)
 		shared_msrs_global.nr = slot + 1;
-	shared_msrs_global.msrs[slot].msr = msr;
-	rdmsrl_safe(msr, &value);
-	shared_msrs_global.msrs[slot].value = value;
-	for_each_online_cpu(cpu)
-		per_cpu(shared_msrs, cpu).current_value[slot] = value;
+	shared_msrs_global.msrs[slot] = msr;
+	/* we need ensured the shared_msr_global have been updated */
+	smp_wmb();
 }
 EXPORT_SYMBOL_GPL(kvm_define_shared_msr);
 
 static void kvm_shared_msr_cpu_online(void)
 {
 	unsigned i;
-	struct kvm_shared_msrs *locals = &__get_cpu_var(shared_msrs);
 
 	for (i = 0; i < shared_msrs_global.nr; ++i)
-		locals->current_value[i] = shared_msrs_global.msrs[i].value;
+		shared_msr_update(i, shared_msrs_global.msrs[i]);
 }
 
 void kvm_set_shared_msr(unsigned slot, u64 value, u64 mask)
 {
 	struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs);
 
-	if (((value ^ smsr->current_value[slot]) & mask) == 0)
+	if (((value ^ smsr->values[slot].curr) & mask) == 0)
 		return;
-	smsr->current_value[slot] = value;
-	wrmsrl(shared_msrs_global.msrs[slot].msr, value);
+	smsr->values[slot].curr = value;
+	wrmsrl(shared_msrs_global.msrs[slot], value);
 	if (!smsr->registered) {
 		smsr->urn.on_user_return = kvm_on_user_return;
 		user_return_notifier_register(&smsr->urn);
@@ -210,34 +224,6 @@ static void drop_user_return_notifiers(void *ignore)
 		kvm_on_user_return(&smsr->urn);
 }
 
-unsigned long segment_base(u16 selector)
-{
-	struct descriptor_table gdt;
-	struct desc_struct *d;
-	unsigned long table_base;
-	unsigned long v;
-
-	if (selector == 0)
-		return 0;
-
-	kvm_get_gdt(&gdt);
-	table_base = gdt.base;
-
-	if (selector & 4) {           /* from ldt */
-		u16 ldt_selector = kvm_read_ldt();
-
-		table_base = segment_base(ldt_selector);
-	}
-	d = (struct desc_struct *)(table_base + (selector & ~7));
-	v = get_desc_base(d);
-#ifdef CONFIG_X86_64
-	if (d->s == 0 && (d->type == 2 || d->type == 9 || d->type == 11))
-		v |= ((unsigned long)((struct ldttss_desc64 *)d)->base3) << 32;
-#endif
-	return v;
-}
-EXPORT_SYMBOL_GPL(segment_base);
-
 u64 kvm_get_apic_base(struct kvm_vcpu *vcpu)
 {
 	if (irqchip_in_kernel(vcpu->kvm))
@@ -257,38 +243,83 @@ void kvm_set_apic_base(struct kvm_vcpu *vcpu, u64 data)
 }
 EXPORT_SYMBOL_GPL(kvm_set_apic_base);
 
+#define EXCPT_BENIGN		0
+#define EXCPT_CONTRIBUTORY	1
+#define EXCPT_PF		2
+
+static int exception_class(int vector)
+{
+	switch (vector) {
+	case PF_VECTOR:
+		return EXCPT_PF;
+	case DE_VECTOR:
+	case TS_VECTOR:
+	case NP_VECTOR:
+	case SS_VECTOR:
+	case GP_VECTOR:
+		return EXCPT_CONTRIBUTORY;
+	default:
+		break;
+	}
+	return EXCPT_BENIGN;
+}
+
+static void kvm_multiple_exception(struct kvm_vcpu *vcpu,
+		unsigned nr, bool has_error, u32 error_code,
+		bool reinject)
+{
+	u32 prev_nr;
+	int class1, class2;
+
+	if (!vcpu->arch.exception.pending) {
+	queue:
+		vcpu->arch.exception.pending = true;
+		vcpu->arch.exception.has_error_code = has_error;
+		vcpu->arch.exception.nr = nr;
+		vcpu->arch.exception.error_code = error_code;
+		vcpu->arch.exception.reinject = reinject;
+		return;
+	}
+
+	/* to check exception */
+	prev_nr = vcpu->arch.exception.nr;
+	if (prev_nr == DF_VECTOR) {
+		/* triple fault -> shutdown */
+		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+		return;
+	}
+	class1 = exception_class(prev_nr);
+	class2 = exception_class(nr);
+	if ((class1 == EXCPT_CONTRIBUTORY && class2 == EXCPT_CONTRIBUTORY)
+		|| (class1 == EXCPT_PF && class2 != EXCPT_BENIGN)) {
+		/* generate double fault per SDM Table 5-5 */
+		vcpu->arch.exception.pending = true;
+		vcpu->arch.exception.has_error_code = true;
+		vcpu->arch.exception.nr = DF_VECTOR;
+		vcpu->arch.exception.error_code = 0;
+	} else
+		/* replace previous exception with a new one in a hope
+		   that instruction re-execution will regenerate lost
+		   exception */
+		goto queue;
+}
+
 void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr)
 {
-	WARN_ON(vcpu->arch.exception.pending);
-	vcpu->arch.exception.pending = true;
-	vcpu->arch.exception.has_error_code = false;
-	vcpu->arch.exception.nr = nr;
+	kvm_multiple_exception(vcpu, nr, false, 0, false);
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception);
 
+void kvm_requeue_exception(struct kvm_vcpu *vcpu, unsigned nr)
+{
+	kvm_multiple_exception(vcpu, nr, false, 0, true);
+}
+EXPORT_SYMBOL_GPL(kvm_requeue_exception);
+
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 			   u32 error_code)
 {
 	++vcpu->stat.pf_guest;
-
-	if (vcpu->arch.exception.pending) {
-		switch(vcpu->arch.exception.nr) {
-		case DF_VECTOR:
-			/* triple fault -> shutdown */
-			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
-			return;
-		case PF_VECTOR:
-			vcpu->arch.exception.nr = DF_VECTOR;
-			vcpu->arch.exception.error_code = 0;
-			return;
-		default:
-			/* replace previous exception with a new one in a hope
-			   that instruction re-execution will regenerate lost
-			   exception */
-			vcpu->arch.exception.pending = false;
-			break;
-		}
-	}
 	vcpu->arch.cr2 = addr;
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
 }
@@ -301,14 +332,16 @@ EXPORT_SYMBOL_GPL(kvm_inject_nmi);
 
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 {
-	WARN_ON(vcpu->arch.exception.pending);
-	vcpu->arch.exception.pending = true;
-	vcpu->arch.exception.has_error_code = true;
-	vcpu->arch.exception.nr = nr;
-	vcpu->arch.exception.error_code = error_code;
+	kvm_multiple_exception(vcpu, nr, true, error_code, false);
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
 
+void kvm_requeue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
+{
+	kvm_multiple_exception(vcpu, nr, true, error_code, true);
+}
+EXPORT_SYMBOL_GPL(kvm_requeue_exception_e);
+
 /*
  * Checks if cpl <= required_cpl; if true, return true.  Otherwise queue
  * a #GP and return false.
@@ -383,41 +416,38 @@ out:
 
 void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
-	if (cr0 & CR0_RESERVED_BITS) {
-		printk(KERN_DEBUG "set_cr0: 0x%lx #GP, reserved bits 0x%lx\n",
-		       cr0, vcpu->arch.cr0);
+	cr0 |= X86_CR0_ET;
+
+#ifdef CONFIG_X86_64
+	if (cr0 & 0xffffffff00000000UL) {
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
+#endif
+
+	cr0 &= ~CR0_RESERVED_BITS;
 
 	if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD)) {
-		printk(KERN_DEBUG "set_cr0: #GP, CD == 0 && NW == 1\n");
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
 
 	if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE)) {
-		printk(KERN_DEBUG "set_cr0: #GP, set PG flag "
-		       "and a clear PE flag\n");
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
 
 	if (!is_paging(vcpu) && (cr0 & X86_CR0_PG)) {
 #ifdef CONFIG_X86_64
-		if ((vcpu->arch.shadow_efer & EFER_LME)) {
+		if ((vcpu->arch.efer & EFER_LME)) {
 			int cs_db, cs_l;
 
 			if (!is_pae(vcpu)) {
-				printk(KERN_DEBUG "set_cr0: #GP, start paging "
-				       "in long mode while PAE is disabled\n");
 				kvm_inject_gp(vcpu, 0);
 				return;
 			}
 			kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 			if (cs_l) {
-				printk(KERN_DEBUG "set_cr0: #GP, start paging "
-				       "in long mode while CS.L == 1\n");
 				kvm_inject_gp(vcpu, 0);
 				return;
 
@@ -425,8 +455,6 @@ void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 		} else
 #endif
 		if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
-			printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
-			       "reserved bits\n");
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
@@ -434,7 +462,6 @@ void kvm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	}
 
 	kvm_x86_ops->set_cr0(vcpu, cr0);
-	vcpu->arch.cr0 = cr0;
 
 	kvm_mmu_reset_context(vcpu);
 	return;
@@ -443,44 +470,38 @@ EXPORT_SYMBOL_GPL(kvm_set_cr0);
 
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
 {
-	kvm_set_cr0(vcpu, (vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f));
+	kvm_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~0x0eul) | (msw & 0x0f));
 }
 EXPORT_SYMBOL_GPL(kvm_lmsw);
 
 void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	unsigned long old_cr4 = vcpu->arch.cr4;
+	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
 
 	if (cr4 & CR4_RESERVED_BITS) {
-		printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
 
 	if (is_long_mode(vcpu)) {
 		if (!(cr4 & X86_CR4_PAE)) {
-			printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
-			       "in long mode\n");
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
 	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
 		   && ((cr4 ^ old_cr4) & pdptr_bits)
 		   && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
-		printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
 
 	if (cr4 & X86_CR4_VMXE) {
-		printk(KERN_DEBUG "set_cr4: #GP, setting VMXE\n");
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
 	kvm_x86_ops->set_cr4(vcpu, cr4);
 	vcpu->arch.cr4 = cr4;
-	vcpu->arch.mmu.base_role.cr4_pge = (cr4 & X86_CR4_PGE) && !tdp_enabled;
 	kvm_mmu_reset_context(vcpu);
 }
 EXPORT_SYMBOL_GPL(kvm_set_cr4);
@@ -495,21 +516,16 @@ void kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 	if (is_long_mode(vcpu)) {
 		if (cr3 & CR3_L_MODE_RESERVED_BITS) {
-			printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
 			kvm_inject_gp(vcpu, 0);
 			return;
 		}
 	} else {
 		if (is_pae(vcpu)) {
 			if (cr3 & CR3_PAE_RESERVED_BITS) {
-				printk(KERN_DEBUG
-				       "set_cr3: #GP, reserved bits\n");
 				kvm_inject_gp(vcpu, 0);
 				return;
 			}
 			if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3)) {
-				printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
-				       "reserved bits\n");
 				kvm_inject_gp(vcpu, 0);
 				return;
 			}
@@ -541,7 +557,6 @@ EXPORT_SYMBOL_GPL(kvm_set_cr3);
 void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
 	if (cr8 & CR8_RESERVED_BITS) {
-		printk(KERN_DEBUG "set_cr8: #GP, reserved bits 0x%lx\n", cr8);
 		kvm_inject_gp(vcpu, 0);
 		return;
 	}
@@ -561,6 +576,80 @@ unsigned long kvm_get_cr8(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_get_cr8);
 
+int kvm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long val)
+{
+	switch (dr) {
+	case 0 ... 3:
+		vcpu->arch.db[dr] = val;
+		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP))
+			vcpu->arch.eff_db[dr] = val;
+		break;
+	case 4:
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
+			kvm_queue_exception(vcpu, UD_VECTOR);
+			return 1;
+		}
+		/* fall through */
+	case 6:
+		if (val & 0xffffffff00000000ULL) {
+			kvm_inject_gp(vcpu, 0);
+			return 1;
+		}
+		vcpu->arch.dr6 = (val & DR6_VOLATILE) | DR6_FIXED_1;
+		break;
+	case 5:
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
+			kvm_queue_exception(vcpu, UD_VECTOR);
+			return 1;
+		}
+		/* fall through */
+	default: /* 7 */
+		if (val & 0xffffffff00000000ULL) {
+			kvm_inject_gp(vcpu, 0);
+			return 1;
+		}
+		vcpu->arch.dr7 = (val & DR7_VOLATILE) | DR7_FIXED_1;
+		if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
+			kvm_x86_ops->set_dr7(vcpu, vcpu->arch.dr7);
+			vcpu->arch.switch_db_regs = (val & DR7_BP_EN_MASK);
+		}
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_set_dr);
+
+int kvm_get_dr(struct kvm_vcpu *vcpu, int dr, unsigned long *val)
+{
+	switch (dr) {
+	case 0 ... 3:
+		*val = vcpu->arch.db[dr];
+		break;
+	case 4:
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
+			kvm_queue_exception(vcpu, UD_VECTOR);
+			return 1;
+		}
+		/* fall through */
+	case 6:
+		*val = vcpu->arch.dr6;
+		break;
+	case 5:
+		if (kvm_read_cr4_bits(vcpu, X86_CR4_DE)) {
+			kvm_queue_exception(vcpu, UD_VECTOR);
+			return 1;
+		}
+		/* fall through */
+	default: /* 7 */
+		*val = vcpu->arch.dr7;
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_get_dr);
+
 static inline u32 bit(int bitno)
 {
 	return 1 << (bitno & 31);
@@ -575,9 +664,12 @@ static inline u32 bit(int bitno)
  * kvm-specific. Those are put in the beginning of the list.
  */
 
-#define KVM_SAVE_MSRS_BEGIN	2
+#define KVM_SAVE_MSRS_BEGIN	7
 static u32 msrs_to_save[] = {
 	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
+	MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
+	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
+	HV_X64_MSR_APIC_ASSIST_PAGE,
 	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
 	MSR_K6_STAR,
 #ifdef CONFIG_X86_64
@@ -592,53 +684,42 @@ static u32 emulated_msrs[] = {
 	MSR_IA32_MISC_ENABLE,
 };
 
-static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
+static int set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
-	if (efer & efer_reserved_bits) {
-		printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
-		       efer);
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	if (efer & efer_reserved_bits)
+		return 1;
 
 	if (is_paging(vcpu)
-	    && (vcpu->arch.shadow_efer & EFER_LME) != (efer & EFER_LME)) {
-		printk(KERN_DEBUG "set_efer: #GP, change LME while paging\n");
-		kvm_inject_gp(vcpu, 0);
-		return;
-	}
+	    && (vcpu->arch.efer & EFER_LME) != (efer & EFER_LME))
+		return 1;
 
 	if (efer & EFER_FFXSR) {
 		struct kvm_cpuid_entry2 *feat;
 
 		feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
-		if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT))) {
-			printk(KERN_DEBUG "set_efer: #GP, enable FFXSR w/o CPUID capability\n");
-			kvm_inject_gp(vcpu, 0);
-			return;
-		}
+		if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT)))
+			return 1;
 	}
 
 	if (efer & EFER_SVME) {
 		struct kvm_cpuid_entry2 *feat;
 
 		feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
-		if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM))) {
-			printk(KERN_DEBUG "set_efer: #GP, enable SVM w/o SVM\n");
-			kvm_inject_gp(vcpu, 0);
-			return;
-		}
+		if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM)))
+			return 1;
 	}
 
-	kvm_x86_ops->set_efer(vcpu, efer);
-
 	efer &= ~EFER_LMA;
-	efer |= vcpu->arch.shadow_efer & EFER_LMA;
+	efer |= vcpu->arch.efer & EFER_LMA;
+
+	kvm_x86_ops->set_efer(vcpu, efer);
 
-	vcpu->arch.shadow_efer = efer;
+	vcpu->arch.efer = efer;
 
 	vcpu->arch.mmu.base_role.nxe = (efer & EFER_NX) && !tdp_enabled;
 	kvm_mmu_reset_context(vcpu);
+
+	return 0;
 }
 
 void kvm_enable_efer_bits(u64 mask)
@@ -668,14 +749,22 @@ static int do_set_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data)
 
 static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 {
-	static int version;
+	int version;
+	int r;
 	struct pvclock_wall_clock wc;
-	struct timespec now, sys, boot;
+	struct timespec boot;
 
 	if (!wall_clock)
 		return;
 
-	version++;
+	r = kvm_read_guest(kvm, wall_clock, &version, sizeof(version));
+	if (r)
+		return;
+
+	if (version & 1)
+		++version;  /* first time write, random junk */
+
+	++version;
 
 	kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
 
@@ -685,9 +774,7 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 	 * wall clock specified here.  guest system time equals host
 	 * system time for us, thus we must fill in host boot time here.
 	 */
-	now = current_kernel_time();
-	ktime_get_ts(&sys);
-	boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+	getboottime(&boot);
 
 	wc.sec = boot.tv_sec;
 	wc.nsec = boot.tv_nsec;
@@ -762,6 +849,7 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	local_irq_save(flags);
 	kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
 	ktime_get_ts(&ts);
+	monotonic_to_bootbased(&ts);
 	local_irq_restore(flags);
 
 	/* With all the info we got, fill in the values */
@@ -769,6 +857,8 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	vcpu->hv_clock.system_time = ts.tv_nsec +
 				     (NSEC_PER_SEC * (u64)ts.tv_sec) + v->kvm->arch.kvmclock_offset;
 
+	vcpu->hv_clock.flags = 0;
+
 	/*
 	 * The interface expects us to write an even number signaling that the
 	 * update is finished. Since the guest won't see the intermediate
@@ -914,9 +1004,13 @@ static int set_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		if (msr >= MSR_IA32_MC0_CTL &&
 		    msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
 			u32 offset = msr - MSR_IA32_MC0_CTL;
-			/* only 0 or all 1s can be written to IA32_MCi_CTL */
+			/* only 0 or all 1s can be written to IA32_MCi_CTL
+			 * some Linux kernels though clear bit 10 in bank 4 to
+			 * workaround a BIOS/GART TBL issue on AMD K8s, ignore
+			 * this to avoid an uncatched #GP in the guest
+			 */
 			if ((offset & 0x3) == 0 &&
-			    data != 0 && data != ~(u64)0)
+			    data != 0 && (data | (1 << 10)) != ~(u64)0)
 				return -1;
 			vcpu->arch.mce_banks[offset] = data;
 			break;
@@ -958,14 +1052,108 @@ out:
 	return r;
 }
 
+static bool kvm_hv_hypercall_enabled(struct kvm *kvm)
+{
+	return kvm->arch.hv_hypercall & HV_X64_MSR_HYPERCALL_ENABLE;
+}
+
+static bool kvm_hv_msr_partition_wide(u32 msr)
+{
+	bool r = false;
+	switch (msr) {
+	case HV_X64_MSR_GUEST_OS_ID:
+	case HV_X64_MSR_HYPERCALL:
+		r = true;
+		break;
+	}
+
+	return r;
+}
+
+static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	switch (msr) {
+	case HV_X64_MSR_GUEST_OS_ID:
+		kvm->arch.hv_guest_os_id = data;
+		/* setting guest os id to zero disables hypercall page */
+		if (!kvm->arch.hv_guest_os_id)
+			kvm->arch.hv_hypercall &= ~HV_X64_MSR_HYPERCALL_ENABLE;
+		break;
+	case HV_X64_MSR_HYPERCALL: {
+		u64 gfn;
+		unsigned long addr;
+		u8 instructions[4];
+
+		/* if guest os id is not set hypercall should remain disabled */
+		if (!kvm->arch.hv_guest_os_id)
+			break;
+		if (!(data & HV_X64_MSR_HYPERCALL_ENABLE)) {
+			kvm->arch.hv_hypercall = data;
+			break;
+		}
+		gfn = data >> HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT;
+		addr = gfn_to_hva(kvm, gfn);
+		if (kvm_is_error_hva(addr))
+			return 1;
+		kvm_x86_ops->patch_hypercall(vcpu, instructions);
+		((unsigned char *)instructions)[3] = 0xc3; /* ret */
+		if (copy_to_user((void __user *)addr, instructions, 4))
+			return 1;
+		kvm->arch.hv_hypercall = data;
+		break;
+	}
+	default:
+		pr_unimpl(vcpu, "HYPER-V unimplemented wrmsr: 0x%x "
+			  "data 0x%llx\n", msr, data);
+		return 1;
+	}
+	return 0;
+}
+
+static int set_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	switch (msr) {
+	case HV_X64_MSR_APIC_ASSIST_PAGE: {
+		unsigned long addr;
+
+		if (!(data & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE)) {
+			vcpu->arch.hv_vapic = data;
+			break;
+		}
+		addr = gfn_to_hva(vcpu->kvm, data >>
+				  HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT);
+		if (kvm_is_error_hva(addr))
+			return 1;
+		if (clear_user((void __user *)addr, PAGE_SIZE))
+			return 1;
+		vcpu->arch.hv_vapic = data;
+		break;
+	}
+	case HV_X64_MSR_EOI:
+		return kvm_hv_vapic_msr_write(vcpu, APIC_EOI, data);
+	case HV_X64_MSR_ICR:
+		return kvm_hv_vapic_msr_write(vcpu, APIC_ICR, data);
+	case HV_X64_MSR_TPR:
+		return kvm_hv_vapic_msr_write(vcpu, APIC_TASKPRI, data);
+	default:
+		pr_unimpl(vcpu, "HYPER-V unimplemented wrmsr: 0x%x "
+			  "data 0x%llx\n", msr, data);
+		return 1;
+	}
+
+	return 0;
+}
+
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
 	switch (msr) {
 	case MSR_EFER:
-		set_efer(vcpu, data);
-		break;
+		return set_efer(vcpu, data);
 	case MSR_K7_HWCR:
 		data &= ~(u64)0x40;	/* ignore flush filter disable */
+		data &= ~(u64)0x100;	/* ignore ignne emulation enable */
 		if (data != 0) {
 			pr_unimpl(vcpu, "unimplemented HWCR wrmsr: 0x%llx\n",
 				data);
@@ -1008,10 +1196,12 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_MISC_ENABLE:
 		vcpu->arch.ia32_misc_enable_msr = data;
 		break;
+	case MSR_KVM_WALL_CLOCK_NEW:
 	case MSR_KVM_WALL_CLOCK:
 		vcpu->kvm->arch.wall_clock = data;
 		kvm_write_wall_clock(vcpu->kvm, data);
 		break;
+	case MSR_KVM_SYSTEM_TIME_NEW:
 	case MSR_KVM_SYSTEM_TIME: {
 		if (vcpu->arch.time_page) {
 			kvm_release_page_dirty(vcpu->arch.time_page);
@@ -1072,6 +1262,16 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
 			"0x%x data 0x%llx\n", msr, data);
 		break;
+	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
+		if (kvm_hv_msr_partition_wide(msr)) {
+			int r;
+			mutex_lock(&vcpu->kvm->lock);
+			r = set_msr_hyperv_pw(vcpu, msr, data);
+			mutex_unlock(&vcpu->kvm->lock);
+			return r;
+		} else
+			return set_msr_hyperv(vcpu, msr, data);
+		break;
 	default:
 		if (msr && (msr == vcpu->kvm->arch.xen_hvm_config.msr))
 			return xen_hvm_config(vcpu, data);
@@ -1171,6 +1371,54 @@ static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	return 0;
 }
 
+static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	u64 data = 0;
+	struct kvm *kvm = vcpu->kvm;
+
+	switch (msr) {
+	case HV_X64_MSR_GUEST_OS_ID:
+		data = kvm->arch.hv_guest_os_id;
+		break;
+	case HV_X64_MSR_HYPERCALL:
+		data = kvm->arch.hv_hypercall;
+		break;
+	default:
+		pr_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
+		return 1;
+	}
+
+	*pdata = data;
+	return 0;
+}
+
+static int get_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	u64 data = 0;
+
+	switch (msr) {
+	case HV_X64_MSR_VP_INDEX: {
+		int r;
+		struct kvm_vcpu *v;
+		kvm_for_each_vcpu(r, v, vcpu->kvm)
+			if (v == vcpu)
+				data = r;
+		break;
+	}
+	case HV_X64_MSR_EOI:
+		return kvm_hv_vapic_msr_read(vcpu, APIC_EOI, pdata);
+	case HV_X64_MSR_ICR:
+		return kvm_hv_vapic_msr_read(vcpu, APIC_ICR, pdata);
+	case HV_X64_MSR_TPR:
+		return kvm_hv_vapic_msr_read(vcpu, APIC_TASKPRI, pdata);
+	default:
+		pr_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
+		return 1;
+	}
+	*pdata = data;
+	return 0;
+}
+
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
@@ -1222,12 +1470,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 		data |= (((uint64_t)4ULL) << 40);
 		break;
 	case MSR_EFER:
-		data = vcpu->arch.shadow_efer;
+		data = vcpu->arch.efer;
 		break;
 	case MSR_KVM_WALL_CLOCK:
+	case MSR_KVM_WALL_CLOCK_NEW:
 		data = vcpu->kvm->arch.wall_clock;
 		break;
 	case MSR_KVM_SYSTEM_TIME:
+	case MSR_KVM_SYSTEM_TIME_NEW:
 		data = vcpu->arch.time;
 		break;
 	case MSR_IA32_P5_MC_ADDR:
@@ -1237,6 +1487,16 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MCG_STATUS:
 	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
 		return get_msr_mce(vcpu, msr, pdata);
+	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
+		if (kvm_hv_msr_partition_wide(msr)) {
+			int r;
+			mutex_lock(&vcpu->kvm->lock);
+			r = get_msr_hyperv_pw(vcpu, msr, pdata);
+			mutex_unlock(&vcpu->kvm->lock);
+			return r;
+		} else
+			return get_msr_hyperv(vcpu, msr, pdata);
+		break;
 	default:
 		if (!ignore_msrs) {
 			pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
@@ -1262,15 +1522,15 @@ static int __msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs *msrs,
 		    int (*do_msr)(struct kvm_vcpu *vcpu,
 				  unsigned index, u64 *data))
 {
-	int i;
+	int i, idx;
 
 	vcpu_load(vcpu);
 
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	for (i = 0; i < msrs->nmsrs; ++i)
 		if (do_msr(vcpu, entries[i].index, &entries[i].data))
 			break;
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 
 	vcpu_put(vcpu);
 
@@ -1302,7 +1562,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
 
 	r = -ENOMEM;
 	size = sizeof(struct kvm_msr_entry) * msrs.nmsrs;
-	entries = vmalloc(size);
+	entries = kmalloc(size, GFP_KERNEL);
 	if (!entries)
 		goto out;
 
@@ -1321,7 +1581,7 @@ static int msr_io(struct kvm_vcpu *vcpu, struct kvm_msrs __user *user_msrs,
 	r = n;
 
 out_free:
-	vfree(entries);
+	kfree(entries);
 out:
 	return r;
 }
@@ -1352,6 +1612,12 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_XEN_HVM:
 	case KVM_CAP_ADJUST_CLOCK:
 	case KVM_CAP_VCPU_EVENTS:
+	case KVM_CAP_HYPERV:
+	case KVM_CAP_HYPERV_VAPIC:
+	case KVM_CAP_HYPERV_SPIN:
+	case KVM_CAP_PCI_SEGMENT:
+	case KVM_CAP_DEBUGREGS:
+	case KVM_CAP_X86_ROBUST_SINGLESTEP:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1465,8 +1731,8 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->vcpu_put(vcpu);
 	kvm_put_guest_fpu(vcpu);
+	kvm_x86_ops->vcpu_put(vcpu);
 }
 
 static int is_efer_nx(void)
@@ -1515,6 +1781,7 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	if (copy_from_user(cpuid_entries, entries,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry)))
 		goto out_free;
+	vcpu_load(vcpu);
 	for (i = 0; i < cpuid->nent; i++) {
 		vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function;
 		vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax;
@@ -1531,6 +1798,8 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	cpuid_fix_nx_cap(vcpu);
 	r = 0;
 	kvm_apic_set_version(vcpu);
+	kvm_x86_ops->cpuid_update(vcpu);
+	vcpu_put(vcpu);
 
 out_free:
 	vfree(cpuid_entries);
@@ -1551,8 +1820,11 @@ static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
 	if (copy_from_user(&vcpu->arch.cpuid_entries, entries,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out;
+	vcpu_load(vcpu);
 	vcpu->arch.cpuid_nent = cpuid->nent;
 	kvm_apic_set_version(vcpu);
+	kvm_x86_ops->cpuid_update(vcpu);
+	vcpu_put(vcpu);
 	return 0;
 
 out:
@@ -1565,6 +1837,7 @@ static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
 {
 	int r;
 
+	vcpu_load(vcpu);
 	r = -E2BIG;
 	if (cpuid->nent < vcpu->arch.cpuid_nent)
 		goto out;
@@ -1576,6 +1849,7 @@ static int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
 
 out:
 	cpuid->nent = vcpu->arch.cpuid_nent;
+	vcpu_put(vcpu);
 	return r;
 }
 
@@ -1595,12 +1869,15 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			 u32 index, int *nent, int maxnent)
 {
 	unsigned f_nx = is_efer_nx() ? F(NX) : 0;
-	unsigned f_gbpages = kvm_x86_ops->gb_page_enable() ? F(GBPAGES) : 0;
 #ifdef CONFIG_X86_64
+	unsigned f_gbpages = (kvm_x86_ops->get_lpage_level() == PT_PDPE_LEVEL)
+				? F(GBPAGES) : 0;
 	unsigned f_lm = F(LM);
 #else
+	unsigned f_gbpages = 0;
 	unsigned f_lm = 0;
 #endif
+	unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported() ? F(RDTSCP) : 0;
 
 	/* cpuid 1.edx */
 	const u32 kvm_supported_word0_x86_features =
@@ -1620,7 +1897,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
 		F(PAT) | F(PSE36) | 0 /* Reserved */ |
 		f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
-		F(FXSR) | F(FXSR_OPT) | f_gbpages | 0 /* RDTSCP */ |
+		F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp |
 		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
 	/* cpuid 1.ecx */
 	const u32 kvm_supported_word4_x86_features =
@@ -1703,6 +1980,24 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		}
 		break;
 	}
+	case KVM_CPUID_SIGNATURE: {
+		char signature[12] = "KVMKVMKVM\0\0";
+		u32 *sigptr = (u32 *)signature;
+		entry->eax = 0;
+		entry->ebx = sigptr[0];
+		entry->ecx = sigptr[1];
+		entry->edx = sigptr[2];
+		break;
+	}
+	case KVM_CPUID_FEATURES:
+		entry->eax = (1 << KVM_FEATURE_CLOCKSOURCE) |
+			     (1 << KVM_FEATURE_NOP_IO_DELAY) |
+			     (1 << KVM_FEATURE_CLOCKSOURCE2) |
+			     (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT);
+		entry->ebx = 0;
+		entry->ecx = 0;
+		entry->edx = 0;
+		break;
 	case 0x80000000:
 		entry->eax = min(entry->eax, 0x8000001a);
 		break;
@@ -1711,6 +2006,9 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		entry->ecx &= kvm_supported_word6_x86_features;
 		break;
 	}
+
+	kvm_x86_ops->set_supported_cpuid(function, entry);
+
 	put_cpu();
 }
 
@@ -1746,6 +2044,23 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
 		do_cpuid_ent(&cpuid_entries[nent], func, 0,
 			     &nent, cpuid->nent);
+
+
+
+	r = -E2BIG;
+	if (nent >= cpuid->nent)
+		goto out_free;
+
+	do_cpuid_ent(&cpuid_entries[nent], KVM_CPUID_SIGNATURE, 0, &nent,
+		     cpuid->nent);
+
+	r = -E2BIG;
+	if (nent >= cpuid->nent)
+		goto out_free;
+
+	do_cpuid_ent(&cpuid_entries[nent], KVM_CPUID_FEATURES, 0, &nent,
+		     cpuid->nent);
+
 	r = -E2BIG;
 	if (nent >= cpuid->nent)
 		goto out_free;
@@ -1825,6 +2140,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
 	int r;
 	unsigned bank_num = mcg_cap & 0xff, bank;
 
+	vcpu_load(vcpu);
 	r = -EINVAL;
 	if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
 		goto out;
@@ -1839,6 +2155,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
 	for (bank = 0; bank < bank_num; bank++)
 		vcpu->arch.mce_banks[bank*4] = ~(u64)0;
 out:
+	vcpu_put(vcpu);
 	return r;
 }
 
@@ -1867,7 +2184,7 @@ static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
 		return 0;
 	if (mce->status & MCI_STATUS_UC) {
 		if ((vcpu->arch.mcg_status & MCG_STATUS_MCIP) ||
-		    !(vcpu->arch.cr4 & X86_CR4_MCE)) {
+		    !kvm_read_cr4_bits(vcpu, X86_CR4_MCE)) {
 			printk(KERN_DEBUG "kvm: set_mce: "
 			       "injects mce exception while "
 			       "previous one is in progress!\n");
@@ -1898,14 +2215,20 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 {
 	vcpu_load(vcpu);
 
-	events->exception.injected = vcpu->arch.exception.pending;
+	events->exception.injected =
+		vcpu->arch.exception.pending &&
+		!kvm_exception_is_soft(vcpu->arch.exception.nr);
 	events->exception.nr = vcpu->arch.exception.nr;
 	events->exception.has_error_code = vcpu->arch.exception.has_error_code;
 	events->exception.error_code = vcpu->arch.exception.error_code;
 
-	events->interrupt.injected = vcpu->arch.interrupt.pending;
+	events->interrupt.injected =
+		vcpu->arch.interrupt.pending && !vcpu->arch.interrupt.soft;
 	events->interrupt.nr = vcpu->arch.interrupt.nr;
-	events->interrupt.soft = vcpu->arch.interrupt.soft;
+	events->interrupt.soft = 0;
+	events->interrupt.shadow =
+		kvm_x86_ops->get_interrupt_shadow(vcpu,
+			KVM_X86_SHADOW_INT_MOV_SS | KVM_X86_SHADOW_INT_STI);
 
 	events->nmi.injected = vcpu->arch.nmi_injected;
 	events->nmi.pending = vcpu->arch.nmi_pending;
@@ -1914,7 +2237,8 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
 	events->sipi_vector = vcpu->arch.sipi_vector;
 
 	events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING
-			 | KVM_VCPUEVENT_VALID_SIPI_VECTOR);
+			 | KVM_VCPUEVENT_VALID_SIPI_VECTOR
+			 | KVM_VCPUEVENT_VALID_SHADOW);
 
 	vcpu_put(vcpu);
 }
@@ -1923,7 +2247,8 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 					      struct kvm_vcpu_events *events)
 {
 	if (events->flags & ~(KVM_VCPUEVENT_VALID_NMI_PENDING
-			      | KVM_VCPUEVENT_VALID_SIPI_VECTOR))
+			      | KVM_VCPUEVENT_VALID_SIPI_VECTOR
+			      | KVM_VCPUEVENT_VALID_SHADOW))
 		return -EINVAL;
 
 	vcpu_load(vcpu);
@@ -1938,6 +2263,9 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 	vcpu->arch.interrupt.soft = events->interrupt.soft;
 	if (vcpu->arch.interrupt.pending && irqchip_in_kernel(vcpu->kvm))
 		kvm_pic_clear_isr_ack(vcpu->kvm);
+	if (events->flags & KVM_VCPUEVENT_VALID_SHADOW)
+		kvm_x86_ops->set_interrupt_shadow(vcpu,
+						  events->interrupt.shadow);
 
 	vcpu->arch.nmi_injected = events->nmi.injected;
 	if (events->flags & KVM_VCPUEVENT_VALID_NMI_PENDING)
@@ -1952,6 +2280,36 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static void kvm_vcpu_ioctl_x86_get_debugregs(struct kvm_vcpu *vcpu,
+					     struct kvm_debugregs *dbgregs)
+{
+	vcpu_load(vcpu);
+
+	memcpy(dbgregs->db, vcpu->arch.db, sizeof(vcpu->arch.db));
+	dbgregs->dr6 = vcpu->arch.dr6;
+	dbgregs->dr7 = vcpu->arch.dr7;
+	dbgregs->flags = 0;
+
+	vcpu_put(vcpu);
+}
+
+static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
+					    struct kvm_debugregs *dbgregs)
+{
+	if (dbgregs->flags)
+		return -EINVAL;
+
+	vcpu_load(vcpu);
+
+	memcpy(vcpu->arch.db, dbgregs->db, sizeof(vcpu->arch.db));
+	vcpu->arch.dr6 = dbgregs->dr6;
+	vcpu->arch.dr7 = dbgregs->dr7;
+
+	vcpu_put(vcpu);
+
+	return 0;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -2106,7 +2464,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&mce, argp, sizeof mce))
 			goto out;
+		vcpu_load(vcpu);
 		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
+		vcpu_put(vcpu);
 		break;
 	}
 	case KVM_GET_VCPU_EVENTS: {
@@ -2130,6 +2490,29 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_vcpu_ioctl_x86_set_vcpu_events(vcpu, &events);
 		break;
 	}
+	case KVM_GET_DEBUGREGS: {
+		struct kvm_debugregs dbgregs;
+
+		kvm_vcpu_ioctl_x86_get_debugregs(vcpu, &dbgregs);
+
+		r = -EFAULT;
+		if (copy_to_user(argp, &dbgregs,
+				 sizeof(struct kvm_debugregs)))
+			break;
+		r = 0;
+		break;
+	}
+	case KVM_SET_DEBUGREGS: {
+		struct kvm_debugregs dbgregs;
+
+		r = -EFAULT;
+		if (copy_from_user(&dbgregs, argp,
+				   sizeof(struct kvm_debugregs)))
+			break;
+
+		r = kvm_vcpu_ioctl_x86_set_debugregs(vcpu, &dbgregs);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -2161,14 +2544,14 @@ static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 	if (kvm_nr_mmu_pages < KVM_MIN_ALLOC_MMU_PAGES)
 		return -EINVAL;
 
-	down_write(&kvm->slots_lock);
+	mutex_lock(&kvm->slots_lock);
 	spin_lock(&kvm->mmu_lock);
 
 	kvm_mmu_change_mmu_pages(kvm, kvm_nr_mmu_pages);
 	kvm->arch.n_requested_mmu_pages = kvm_nr_mmu_pages;
 
 	spin_unlock(&kvm->mmu_lock);
-	up_write(&kvm->slots_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return 0;
 }
 
@@ -2177,13 +2560,35 @@ static int kvm_vm_ioctl_get_nr_mmu_pages(struct kvm *kvm)
 	return kvm->arch.n_alloc_mmu_pages;
 }
 
+gfn_t unalias_gfn_instantiation(struct kvm *kvm, gfn_t gfn)
+{
+	int i;
+	struct kvm_mem_alias *alias;
+	struct kvm_mem_aliases *aliases;
+
+	aliases = kvm_aliases(kvm);
+
+	for (i = 0; i < aliases->naliases; ++i) {
+		alias = &aliases->aliases[i];
+		if (alias->flags & KVM_ALIAS_INVALID)
+			continue;
+		if (gfn >= alias->base_gfn
+		    && gfn < alias->base_gfn + alias->npages)
+			return alias->target_gfn + gfn - alias->base_gfn;
+	}
+	return gfn;
+}
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	int i;
 	struct kvm_mem_alias *alias;
+	struct kvm_mem_aliases *aliases;
+
+	aliases = kvm_aliases(kvm);
 
-	for (i = 0; i < kvm->arch.naliases; ++i) {
-		alias = &kvm->arch.aliases[i];
+	for (i = 0; i < aliases->naliases; ++i) {
+		alias = &aliases->aliases[i];
 		if (gfn >= alias->base_gfn
 		    && gfn < alias->base_gfn + alias->npages)
 			return alias->target_gfn + gfn - alias->base_gfn;
@@ -2201,6 +2606,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 {
 	int r, n;
 	struct kvm_mem_alias *p;
+	struct kvm_mem_aliases *aliases, *old_aliases;
 
 	r = -EINVAL;
 	/* General sanity checks */
@@ -2217,26 +2623,48 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 	    < alias->target_phys_addr)
 		goto out;
 
-	down_write(&kvm->slots_lock);
-	spin_lock(&kvm->mmu_lock);
+	r = -ENOMEM;
+	aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
+	if (!aliases)
+		goto out;
+
+	mutex_lock(&kvm->slots_lock);
+
+	/* invalidate any gfn reference in case of deletion/shrinking */
+	memcpy(aliases, kvm->arch.aliases, sizeof(struct kvm_mem_aliases));
+	aliases->aliases[alias->slot].flags |= KVM_ALIAS_INVALID;
+	old_aliases = kvm->arch.aliases;
+	rcu_assign_pointer(kvm->arch.aliases, aliases);
+	synchronize_srcu_expedited(&kvm->srcu);
+	kvm_mmu_zap_all(kvm);
+	kfree(old_aliases);
+
+	r = -ENOMEM;
+	aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
+	if (!aliases)
+		goto out_unlock;
 
-	p = &kvm->arch.aliases[alias->slot];
+	memcpy(aliases, kvm->arch.aliases, sizeof(struct kvm_mem_aliases));
+
+	p = &aliases->aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
 	p->npages = alias->memory_size >> PAGE_SHIFT;
 	p->target_gfn = alias->target_phys_addr >> PAGE_SHIFT;
+	p->flags &= ~(KVM_ALIAS_INVALID);
 
 	for (n = KVM_ALIAS_SLOTS; n > 0; --n)
-		if (kvm->arch.aliases[n - 1].npages)
+		if (aliases->aliases[n - 1].npages)
 			break;
-	kvm->arch.naliases = n;
-
-	spin_unlock(&kvm->mmu_lock);
-	kvm_mmu_zap_all(kvm);
+	aliases->naliases = n;
 
-	up_write(&kvm->slots_lock);
-
-	return 0;
+	old_aliases = kvm->arch.aliases;
+	rcu_assign_pointer(kvm->arch.aliases, aliases);
+	synchronize_srcu_expedited(&kvm->srcu);
+	kfree(old_aliases);
+	r = 0;
 
+out_unlock:
+	mutex_unlock(&kvm->slots_lock);
 out:
 	return r;
 }
@@ -2274,18 +2702,18 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_PIC_MASTER:
-		spin_lock(&pic_irqchip(kvm)->lock);
+		raw_spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[0],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
-		spin_unlock(&pic_irqchip(kvm)->lock);
+		raw_spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_PIC_SLAVE:
-		spin_lock(&pic_irqchip(kvm)->lock);
+		raw_spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[1],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
-		spin_unlock(&pic_irqchip(kvm)->lock);
+		raw_spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_IOAPIC:
 		r = kvm_set_ioapic(kvm, &chip->chip.ioapic);
@@ -2365,29 +2793,63 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 				      struct kvm_dirty_log *log)
 {
-	int r;
-	int n;
+	int r, i;
 	struct kvm_memory_slot *memslot;
-	int is_dirty = 0;
+	unsigned long n;
+	unsigned long is_dirty = 0;
+	unsigned long *dirty_bitmap = NULL;
 
-	down_write(&kvm->slots_lock);
+	mutex_lock(&kvm->slots_lock);
 
-	r = kvm_get_dirty_log(kvm, log, &is_dirty);
-	if (r)
+	r = -EINVAL;
+	if (log->slot >= KVM_MEMORY_SLOTS)
 		goto out;
 
+	memslot = &kvm->memslots->memslots[log->slot];
+	r = -ENOENT;
+	if (!memslot->dirty_bitmap)
+		goto out;
+
+	n = kvm_dirty_bitmap_bytes(memslot);
+
+	r = -ENOMEM;
+	dirty_bitmap = vmalloc(n);
+	if (!dirty_bitmap)
+		goto out;
+	memset(dirty_bitmap, 0, n);
+
+	for (i = 0; !is_dirty && i < n/sizeof(long); i++)
+		is_dirty = memslot->dirty_bitmap[i];
+
 	/* If nothing is dirty, don't bother messing with page tables. */
 	if (is_dirty) {
+		struct kvm_memslots *slots, *old_slots;
+
 		spin_lock(&kvm->mmu_lock);
 		kvm_mmu_slot_remove_write_access(kvm, log->slot);
 		spin_unlock(&kvm->mmu_lock);
-		memslot = &kvm->memslots[log->slot];
-		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
-		memset(memslot->dirty_bitmap, 0, n);
+
+		slots = kzalloc(sizeof(struct kvm_memslots), GFP_KERNEL);
+		if (!slots)
+			goto out_free;
+
+		memcpy(slots, kvm->memslots, sizeof(struct kvm_memslots));
+		slots->memslots[log->slot].dirty_bitmap = dirty_bitmap;
+
+		old_slots = kvm->memslots;
+		rcu_assign_pointer(kvm->memslots, slots);
+		synchronize_srcu_expedited(&kvm->srcu);
+		dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap;
+		kfree(old_slots);
 	}
+
 	r = 0;
+	if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n))
+		r = -EFAULT;
+out_free:
+	vfree(dirty_bitmap);
 out:
-	up_write(&kvm->slots_lock);
+	mutex_unlock(&kvm->slots_lock);
 	return r;
 }
 
@@ -2470,6 +2932,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (vpic) {
 			r = kvm_ioapic_init(kvm);
 			if (r) {
+				kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
+							  &vpic->dev);
 				kfree(vpic);
 				goto create_irqchip_unlock;
 			}
@@ -2481,10 +2945,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = kvm_setup_default_irq_routing(kvm);
 		if (r) {
 			mutex_lock(&kvm->irq_lock);
-			kfree(kvm->arch.vpic);
-			kfree(kvm->arch.vioapic);
-			kvm->arch.vpic = NULL;
-			kvm->arch.vioapic = NULL;
+			kvm_ioapic_destroy(kvm);
+			kvm_destroy_pic(kvm);
 			mutex_unlock(&kvm->irq_lock);
 		}
 	create_irqchip_unlock:
@@ -2500,7 +2962,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 				   sizeof(struct kvm_pit_config)))
 			goto out;
 	create_pit:
-		down_write(&kvm->slots_lock);
+		mutex_lock(&kvm->slots_lock);
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
@@ -2509,7 +2971,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (kvm->arch.vpit)
 			r = 0;
 	create_pit_unlock:
-		up_write(&kvm->slots_lock);
+		mutex_unlock(&kvm->slots_lock);
 		break;
 	case KVM_IRQ_LINE_STATUS:
 	case KVM_IRQ_LINE: {
@@ -2518,11 +2980,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&irq_event, argp, sizeof irq_event))
 			goto out;
+		r = -ENXIO;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 					irq_event.irq, irq_event.level);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
+				r = -EFAULT;
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
 							sizeof irq_event))
@@ -2726,7 +3190,7 @@ static int vcpu_mmio_write(struct kvm_vcpu *vcpu, gpa_t addr, int len,
 	    !kvm_iodevice_write(&vcpu->arch.apic->dev, addr, len, v))
 		return 0;
 
-	return kvm_io_bus_write(&vcpu->kvm->mmio_bus, addr, len, v);
+	return kvm_io_bus_write(vcpu->kvm, KVM_MMIO_BUS, addr, len, v);
 }
 
 static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
@@ -2735,17 +3199,56 @@ static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
 	    !kvm_iodevice_read(&vcpu->arch.apic->dev, addr, len, v))
 		return 0;
 
-	return kvm_io_bus_read(&vcpu->kvm->mmio_bus, addr, len, v);
+	return kvm_io_bus_read(vcpu->kvm, KVM_MMIO_BUS, addr, len, v);
 }
 
-static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
-			       struct kvm_vcpu *vcpu)
+static void kvm_set_segment(struct kvm_vcpu *vcpu,
+			struct kvm_segment *var, int seg)
+{
+	kvm_x86_ops->set_segment(vcpu, var, seg);
+}
+
+void kvm_get_segment(struct kvm_vcpu *vcpu,
+		     struct kvm_segment *var, int seg)
+{
+	kvm_x86_ops->get_segment(vcpu, var, seg);
+}
+
+gpa_t kvm_mmu_gva_to_gpa_read(struct kvm_vcpu *vcpu, gva_t gva, u32 *error)
+{
+	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, gva, access, error);
+}
+
+ gpa_t kvm_mmu_gva_to_gpa_fetch(struct kvm_vcpu *vcpu, gva_t gva, u32 *error)
+{
+	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	access |= PFERR_FETCH_MASK;
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, gva, access, error);
+}
+
+gpa_t kvm_mmu_gva_to_gpa_write(struct kvm_vcpu *vcpu, gva_t gva, u32 *error)
+{
+	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	access |= PFERR_WRITE_MASK;
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, gva, access, error);
+}
+
+/* uses this to access any guest's mapped memory without checking CPL */
+gpa_t kvm_mmu_gva_to_gpa_system(struct kvm_vcpu *vcpu, gva_t gva, u32 *error)
+{
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, gva, 0, error);
+}
+
+static int kvm_read_guest_virt_helper(gva_t addr, void *val, unsigned int bytes,
+				      struct kvm_vcpu *vcpu, u32 access,
+				      u32 *error)
 {
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
 
 	while (bytes) {
-		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr, access, error);
 		unsigned offset = addr & (PAGE_SIZE-1);
 		unsigned toread = min(bytes, (unsigned)PAGE_SIZE - offset);
 		int ret;
@@ -2768,14 +3271,40 @@ out:
 	return r;
 }
 
-static int kvm_write_guest_virt(gva_t addr, void *val, unsigned int bytes,
-				struct kvm_vcpu *vcpu)
+/* used for instruction fetching */
+static int kvm_fetch_guest_virt(gva_t addr, void *val, unsigned int bytes,
+				struct kvm_vcpu *vcpu, u32 *error)
+{
+	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	return kvm_read_guest_virt_helper(addr, val, bytes, vcpu,
+					  access | PFERR_FETCH_MASK, error);
+}
+
+static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
+			       struct kvm_vcpu *vcpu, u32 *error)
+{
+	u32 access = (kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0;
+	return kvm_read_guest_virt_helper(addr, val, bytes, vcpu, access,
+					  error);
+}
+
+static int kvm_read_guest_virt_system(gva_t addr, void *val, unsigned int bytes,
+			       struct kvm_vcpu *vcpu, u32 *error)
+{
+	return kvm_read_guest_virt_helper(addr, val, bytes, vcpu, 0, error);
+}
+
+static int kvm_write_guest_virt_system(gva_t addr, void *val,
+				       unsigned int bytes,
+				       struct kvm_vcpu *vcpu,
+				       u32 *error)
 {
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
 
 	while (bytes) {
-		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+		gpa_t gpa =  vcpu->arch.mmu.gva_to_gpa(vcpu, addr,
+						       PFERR_WRITE_MASK, error);
 		unsigned offset = addr & (PAGE_SIZE-1);
 		unsigned towrite = min(bytes, (unsigned)PAGE_SIZE - offset);
 		int ret;
@@ -2798,13 +3327,13 @@ out:
 	return r;
 }
 
-
 static int emulator_read_emulated(unsigned long addr,
 				  void *val,
 				  unsigned int bytes,
 				  struct kvm_vcpu *vcpu)
 {
 	gpa_t                 gpa;
+	u32 error_code;
 
 	if (vcpu->mmio_read_completed) {
 		memcpy(val, vcpu->mmio_data, bytes);
@@ -2814,17 +3343,20 @@ static int emulator_read_emulated(unsigned long addr,
 		return X86EMUL_CONTINUE;
 	}
 
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+	gpa = kvm_mmu_gva_to_gpa_read(vcpu, addr, &error_code);
+
+	if (gpa == UNMAPPED_GVA) {
+		kvm_inject_page_fault(vcpu, addr, error_code);
+		return X86EMUL_PROPAGATE_FAULT;
+	}
 
 	/* For APIC access vmexit */
 	if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
 		goto mmio;
 
-	if (kvm_read_guest_virt(addr, val, bytes, vcpu)
+	if (kvm_read_guest_virt(addr, val, bytes, vcpu, NULL)
 				== X86EMUL_CONTINUE)
 		return X86EMUL_CONTINUE;
-	if (gpa == UNMAPPED_GVA)
-		return X86EMUL_PROPAGATE_FAULT;
 
 mmio:
 	/*
@@ -2863,11 +3395,12 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 					   struct kvm_vcpu *vcpu)
 {
 	gpa_t                 gpa;
+	u32 error_code;
 
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+	gpa = kvm_mmu_gva_to_gpa_write(vcpu, addr, &error_code);
 
 	if (gpa == UNMAPPED_GVA) {
-		kvm_inject_page_fault(vcpu, addr, 2);
+		kvm_inject_page_fault(vcpu, addr, error_code);
 		return X86EMUL_PROPAGATE_FAULT;
 	}
 
@@ -2896,9 +3429,9 @@ mmio:
 }
 
 int emulator_write_emulated(unsigned long addr,
-				   const void *val,
-				   unsigned int bytes,
-				   struct kvm_vcpu *vcpu)
+			    const void *val,
+			    unsigned int bytes,
+			    struct kvm_vcpu *vcpu)
 {
 	/* Crossing a page boundary? */
 	if (((addr + bytes - 1) ^ addr) & PAGE_MASK) {
@@ -2916,45 +3449,150 @@ int emulator_write_emulated(unsigned long addr,
 }
 EXPORT_SYMBOL_GPL(emulator_write_emulated);
 
+#define CMPXCHG_TYPE(t, ptr, old, new) \
+	(cmpxchg((t *)(ptr), *(t *)(old), *(t *)(new)) == *(t *)(old))
+
+#ifdef CONFIG_X86_64
+#  define CMPXCHG64(ptr, old, new) CMPXCHG_TYPE(u64, ptr, old, new)
+#else
+#  define CMPXCHG64(ptr, old, new) \
+	(cmpxchg64((u64 *)(ptr), *(u64 *)(old), *(u64 *)(new)) == *(u64 *)(old))
+#endif
+
 static int emulator_cmpxchg_emulated(unsigned long addr,
 				     const void *old,
 				     const void *new,
 				     unsigned int bytes,
 				     struct kvm_vcpu *vcpu)
 {
-	printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
-#ifndef CONFIG_X86_64
-	/* guests cmpxchg8b have to be emulated atomically */
-	if (bytes == 8) {
-		gpa_t gpa;
-		struct page *page;
-		char *kaddr;
-		u64 val;
+	gpa_t gpa;
+	struct page *page;
+	char *kaddr;
+	bool exchanged;
 
-		gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
+	/* guests cmpxchg8b have to be emulated atomically */
+	if (bytes > 8 || (bytes & (bytes - 1)))
+		goto emul_write;
 
-		if (gpa == UNMAPPED_GVA ||
-		   (gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
-			goto emul_write;
+	gpa = kvm_mmu_gva_to_gpa_write(vcpu, addr, NULL);
 
-		if (((gpa + bytes - 1) & PAGE_MASK) != (gpa & PAGE_MASK))
-			goto emul_write;
+	if (gpa == UNMAPPED_GVA ||
+	    (gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
+		goto emul_write;
 
-		val = *(u64 *)new;
+	if (((gpa + bytes - 1) & PAGE_MASK) != (gpa & PAGE_MASK))
+		goto emul_write;
 
-		page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
 
-		kaddr = kmap_atomic(page, KM_USER0);
-		set_64bit((u64 *)(kaddr + offset_in_page(gpa)), val);
-		kunmap_atomic(kaddr, KM_USER0);
-		kvm_release_page_dirty(page);
+	kaddr = kmap_atomic(page, KM_USER0);
+	kaddr += offset_in_page(gpa);
+	switch (bytes) {
+	case 1:
+		exchanged = CMPXCHG_TYPE(u8, kaddr, old, new);
+		break;
+	case 2:
+		exchanged = CMPXCHG_TYPE(u16, kaddr, old, new);
+		break;
+	case 4:
+		exchanged = CMPXCHG_TYPE(u32, kaddr, old, new);
+		break;
+	case 8:
+		exchanged = CMPXCHG64(kaddr, old, new);
+		break;
+	default:
+		BUG();
 	}
+	kunmap_atomic(kaddr, KM_USER0);
+	kvm_release_page_dirty(page);
+
+	if (!exchanged)
+		return X86EMUL_CMPXCHG_FAILED;
+
+	kvm_mmu_pte_write(vcpu, gpa, new, bytes, 1);
+
+	return X86EMUL_CONTINUE;
+
 emul_write:
-#endif
+	printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
 
 	return emulator_write_emulated(addr, new, bytes, vcpu);
 }
 
+static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
+{
+	/* TODO: String I/O for in kernel device */
+	int r;
+
+	if (vcpu->arch.pio.in)
+		r = kvm_io_bus_read(vcpu->kvm, KVM_PIO_BUS, vcpu->arch.pio.port,
+				    vcpu->arch.pio.size, pd);
+	else
+		r = kvm_io_bus_write(vcpu->kvm, KVM_PIO_BUS,
+				     vcpu->arch.pio.port, vcpu->arch.pio.size,
+				     pd);
+	return r;
+}
+
+
+static int emulator_pio_in_emulated(int size, unsigned short port, void *val,
+			     unsigned int count, struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.pio.count)
+		goto data_avail;
+
+	trace_kvm_pio(1, port, size, 1);
+
+	vcpu->arch.pio.port = port;
+	vcpu->arch.pio.in = 1;
+	vcpu->arch.pio.count  = count;
+	vcpu->arch.pio.size = size;
+
+	if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
+	data_avail:
+		memcpy(val, vcpu->arch.pio_data, size * count);
+		vcpu->arch.pio.count = 0;
+		return 1;
+	}
+
+	vcpu->run->exit_reason = KVM_EXIT_IO;
+	vcpu->run->io.direction = KVM_EXIT_IO_IN;
+	vcpu->run->io.size = size;
+	vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE;
+	vcpu->run->io.count = count;
+	vcpu->run->io.port = port;
+
+	return 0;
+}
+
+static int emulator_pio_out_emulated(int size, unsigned short port,
+			      const void *val, unsigned int count,
+			      struct kvm_vcpu *vcpu)
+{
+	trace_kvm_pio(0, port, size, 1);
+
+	vcpu->arch.pio.port = port;
+	vcpu->arch.pio.in = 0;
+	vcpu->arch.pio.count = count;
+	vcpu->arch.pio.size = size;
+
+	memcpy(vcpu->arch.pio_data, val, size * count);
+
+	if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
+		vcpu->arch.pio.count = 0;
+		return 1;
+	}
+
+	vcpu->run->exit_reason = KVM_EXIT_IO;
+	vcpu->run->io.direction = KVM_EXIT_IO_OUT;
+	vcpu->run->io.size = size;
+	vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE;
+	vcpu->run->io.count = count;
+	vcpu->run->io.port = port;
+
+	return 0;
+}
+
 static unsigned long get_segment_base(struct kvm_vcpu *vcpu, int seg)
 {
 	return kvm_x86_ops->get_segment_base(vcpu, seg);
@@ -2968,35 +3606,21 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
-	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
+	kvm_x86_ops->set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
+	kvm_x86_ops->fpu_activate(vcpu);
 	return X86EMUL_CONTINUE;
 }
 
 int emulator_get_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long *dest)
 {
-	struct kvm_vcpu *vcpu = ctxt->vcpu;
-
-	switch (dr) {
-	case 0 ... 3:
-		*dest = kvm_x86_ops->get_dr(vcpu, dr);
-		return X86EMUL_CONTINUE;
-	default:
-		pr_unimpl(vcpu, "%s: unexpected dr %u\n", __func__, dr);
-		return X86EMUL_UNHANDLEABLE;
-	}
+	return kvm_get_dr(ctxt->vcpu, dr, dest);
 }
 
 int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 {
 	unsigned long mask = (ctxt->mode == X86EMUL_MODE_PROT64) ? ~0ULL : ~0U;
-	int exception;
 
-	kvm_x86_ops->set_dr(ctxt->vcpu, dr, value & mask, &exception);
-	if (exception) {
-		/* FIXME: better handling */
-		return X86EMUL_UNHANDLEABLE;
-	}
-	return X86EMUL_CONTINUE;
+	return kvm_set_dr(ctxt->vcpu, dr, value & mask);
 }
 
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
@@ -3010,18 +3634,174 @@ void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 
 	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
 
-	kvm_read_guest_virt(rip_linear, (void *)opcodes, 4, vcpu);
+	kvm_read_guest_virt(rip_linear, (void *)opcodes, 4, vcpu, NULL);
 
 	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
 	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
 }
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
+static u64 mk_cr_64(u64 curr_cr, u32 new_val)
+{
+	return (curr_cr & ~((1ULL << 32) - 1)) | new_val;
+}
+
+static unsigned long emulator_get_cr(int cr, struct kvm_vcpu *vcpu)
+{
+	unsigned long value;
+
+	switch (cr) {
+	case 0:
+		value = kvm_read_cr0(vcpu);
+		break;
+	case 2:
+		value = vcpu->arch.cr2;
+		break;
+	case 3:
+		value = vcpu->arch.cr3;
+		break;
+	case 4:
+		value = kvm_read_cr4(vcpu);
+		break;
+	case 8:
+		value = kvm_get_cr8(vcpu);
+		break;
+	default:
+		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
+		return 0;
+	}
+
+	return value;
+}
+
+static void emulator_set_cr(int cr, unsigned long val, struct kvm_vcpu *vcpu)
+{
+	switch (cr) {
+	case 0:
+		kvm_set_cr0(vcpu, mk_cr_64(kvm_read_cr0(vcpu), val));
+		break;
+	case 2:
+		vcpu->arch.cr2 = val;
+		break;
+	case 3:
+		kvm_set_cr3(vcpu, val);
+		break;
+	case 4:
+		kvm_set_cr4(vcpu, mk_cr_64(kvm_read_cr4(vcpu), val));
+		break;
+	case 8:
+		kvm_set_cr8(vcpu, val & 0xfUL);
+		break;
+	default:
+		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
+	}
+}
+
+static int emulator_get_cpl(struct kvm_vcpu *vcpu)
+{
+	return kvm_x86_ops->get_cpl(vcpu);
+}
+
+static void emulator_get_gdt(struct desc_ptr *dt, struct kvm_vcpu *vcpu)
+{
+	kvm_x86_ops->get_gdt(vcpu, dt);
+}
+
+static bool emulator_get_cached_descriptor(struct desc_struct *desc, int seg,
+					   struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment var;
+
+	kvm_get_segment(vcpu, &var, seg);
+
+	if (var.unusable)
+		return false;
+
+	if (var.g)
+		var.limit >>= 12;
+	set_desc_limit(desc, var.limit);
+	set_desc_base(desc, (unsigned long)var.base);
+	desc->type = var.type;
+	desc->s = var.s;
+	desc->dpl = var.dpl;
+	desc->p = var.present;
+	desc->avl = var.avl;
+	desc->l = var.l;
+	desc->d = var.db;
+	desc->g = var.g;
+
+	return true;
+}
+
+static void emulator_set_cached_descriptor(struct desc_struct *desc, int seg,
+					   struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment var;
+
+	/* needed to preserve selector */
+	kvm_get_segment(vcpu, &var, seg);
+
+	var.base = get_desc_base(desc);
+	var.limit = get_desc_limit(desc);
+	if (desc->g)
+		var.limit = (var.limit << 12) | 0xfff;
+	var.type = desc->type;
+	var.present = desc->p;
+	var.dpl = desc->dpl;
+	var.db = desc->d;
+	var.s = desc->s;
+	var.l = desc->l;
+	var.g = desc->g;
+	var.avl = desc->avl;
+	var.present = desc->p;
+	var.unusable = !var.present;
+	var.padding = 0;
+
+	kvm_set_segment(vcpu, &var, seg);
+	return;
+}
+
+static u16 emulator_get_segment_selector(int seg, struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment kvm_seg;
+
+	kvm_get_segment(vcpu, &kvm_seg, seg);
+	return kvm_seg.selector;
+}
+
+static void emulator_set_segment_selector(u16 sel, int seg,
+					  struct kvm_vcpu *vcpu)
+{
+	struct kvm_segment kvm_seg;
+
+	kvm_get_segment(vcpu, &kvm_seg, seg);
+	kvm_seg.selector = sel;
+	kvm_set_segment(vcpu, &kvm_seg, seg);
+}
+
+static void emulator_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
+{
+	kvm_x86_ops->set_rflags(vcpu, rflags);
+}
+
 static struct x86_emulate_ops emulate_ops = {
-	.read_std            = kvm_read_guest_virt,
+	.read_std            = kvm_read_guest_virt_system,
+	.write_std           = kvm_write_guest_virt_system,
+	.fetch               = kvm_fetch_guest_virt,
 	.read_emulated       = emulator_read_emulated,
 	.write_emulated      = emulator_write_emulated,
 	.cmpxchg_emulated    = emulator_cmpxchg_emulated,
+	.pio_in_emulated     = emulator_pio_in_emulated,
+	.pio_out_emulated    = emulator_pio_out_emulated,
+	.get_cached_descriptor = emulator_get_cached_descriptor,
+	.set_cached_descriptor = emulator_set_cached_descriptor,
+	.get_segment_selector = emulator_get_segment_selector,
+	.set_segment_selector = emulator_set_segment_selector,
+	.get_gdt             = emulator_get_gdt,
+	.get_cr              = emulator_get_cr,
+	.set_cr              = emulator_set_cr,
+	.cpl                 = emulator_get_cpl,
+	.set_rflags          = emulator_set_rflags,
 };
 
 static void cache_all_regs(struct kvm_vcpu *vcpu)
@@ -3052,21 +3832,23 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 	cache_all_regs(vcpu);
 
 	vcpu->mmio_is_write = 0;
-	vcpu->arch.pio.string = 0;
 
 	if (!(emulation_type & EMULTYPE_NO_DECODE)) {
 		int cs_db, cs_l;
 		kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
 		vcpu->arch.emulate_ctxt.vcpu = vcpu;
-		vcpu->arch.emulate_ctxt.eflags = kvm_get_rflags(vcpu);
+		vcpu->arch.emulate_ctxt.eflags = kvm_x86_ops->get_rflags(vcpu);
+		vcpu->arch.emulate_ctxt.eip = kvm_rip_read(vcpu);
 		vcpu->arch.emulate_ctxt.mode =
+			(!is_protmode(vcpu)) ? X86EMUL_MODE_REAL :
 			(vcpu->arch.emulate_ctxt.eflags & X86_EFLAGS_VM)
-			? X86EMUL_MODE_REAL : cs_l
+			? X86EMUL_MODE_VM86 : cs_l
 			? X86EMUL_MODE_PROT64 :	cs_db
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
+		trace_kvm_emulate_insn_start(vcpu);
 
 		/* Only allow emulation of specific instructions on #UD
 		 * (namely VMMCALL, sysenter, sysexit, syscall)*/
@@ -3099,6 +3881,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		++vcpu->stat.insn_emulation;
 		if (r)  {
 			++vcpu->stat.insn_emulation_fail;
+			trace_kvm_emulate_insn_failed(vcpu);
 			if (kvm_mmu_unprotect_page_virt(vcpu, cr2))
 				return EMULATE_DONE;
 			return EMULATE_FAIL;
@@ -3110,16 +3893,20 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 		return EMULATE_DONE;
 	}
 
+restart:
 	r = x86_emulate_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 	shadow_mask = vcpu->arch.emulate_ctxt.interruptibility;
 
 	if (r == 0)
 		kvm_x86_ops->set_interrupt_shadow(vcpu, shadow_mask);
 
-	if (vcpu->arch.pio.string)
+	if (vcpu->arch.pio.count) {
+		if (!vcpu->arch.pio.in)
+			vcpu->arch.pio.count = 0;
 		return EMULATE_DO_MMIO;
+	}
 
-	if ((r || vcpu->mmio_is_write) && run) {
+	if (r || vcpu->mmio_is_write) {
 		run->exit_reason = KVM_EXIT_MMIO;
 		run->mmio.phys_addr = vcpu->mmio_phys_addr;
 		memcpy(run->mmio.data, vcpu->mmio_data, 8);
@@ -3129,218 +3916,41 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 
 	if (r) {
 		if (kvm_mmu_unprotect_page_virt(vcpu, cr2))
-			return EMULATE_DONE;
+			goto done;
 		if (!vcpu->mmio_needed) {
+			++vcpu->stat.insn_emulation_fail;
+			trace_kvm_emulate_insn_failed(vcpu);
 			kvm_report_emulation_failure(vcpu, "mmio");
 			return EMULATE_FAIL;
 		}
 		return EMULATE_DO_MMIO;
 	}
 
-	kvm_set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
-
 	if (vcpu->mmio_is_write) {
 		vcpu->mmio_needed = 0;
 		return EMULATE_DO_MMIO;
 	}
 
-	return EMULATE_DONE;
-}
-EXPORT_SYMBOL_GPL(emulate_instruction);
-
-static int pio_copy_data(struct kvm_vcpu *vcpu)
-{
-	void *p = vcpu->arch.pio_data;
-	gva_t q = vcpu->arch.pio.guest_gva;
-	unsigned bytes;
-	int ret;
-
-	bytes = vcpu->arch.pio.size * vcpu->arch.pio.cur_count;
-	if (vcpu->arch.pio.in)
-		ret = kvm_write_guest_virt(q, p, bytes, vcpu);
-	else
-		ret = kvm_read_guest_virt(q, p, bytes, vcpu);
-	return ret;
-}
-
-int complete_pio(struct kvm_vcpu *vcpu)
-{
-	struct kvm_pio_request *io = &vcpu->arch.pio;
-	long delta;
-	int r;
-	unsigned long val;
-
-	if (!io->string) {
-		if (io->in) {
-			val = kvm_register_read(vcpu, VCPU_REGS_RAX);
-			memcpy(&val, vcpu->arch.pio_data, io->size);
-			kvm_register_write(vcpu, VCPU_REGS_RAX, val);
-		}
-	} else {
-		if (io->in) {
-			r = pio_copy_data(vcpu);
-			if (r)
-				return r;
-		}
-
-		delta = 1;
-		if (io->rep) {
-			delta *= io->cur_count;
-			/*
-			 * The size of the register should really depend on
-			 * current address size.
-			 */
-			val = kvm_register_read(vcpu, VCPU_REGS_RCX);
-			val -= delta;
-			kvm_register_write(vcpu, VCPU_REGS_RCX, val);
-		}
-		if (io->down)
-			delta = -delta;
-		delta *= io->size;
-		if (io->in) {
-			val = kvm_register_read(vcpu, VCPU_REGS_RDI);
-			val += delta;
-			kvm_register_write(vcpu, VCPU_REGS_RDI, val);
-		} else {
-			val = kvm_register_read(vcpu, VCPU_REGS_RSI);
-			val += delta;
-			kvm_register_write(vcpu, VCPU_REGS_RSI, val);
-		}
-	}
-
-	io->count -= io->cur_count;
-	io->cur_count = 0;
-
-	return 0;
-}
-
-static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
-{
-	/* TODO: String I/O for in kernel device */
-	int r;
-
-	if (vcpu->arch.pio.in)
-		r = kvm_io_bus_read(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
-				    vcpu->arch.pio.size, pd);
-	else
-		r = kvm_io_bus_write(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
-				     vcpu->arch.pio.size, pd);
-	return r;
-}
-
-static int pio_string_write(struct kvm_vcpu *vcpu)
-{
-	struct kvm_pio_request *io = &vcpu->arch.pio;
-	void *pd = vcpu->arch.pio_data;
-	int i, r = 0;
-
-	for (i = 0; i < io->cur_count; i++) {
-		if (kvm_io_bus_write(&vcpu->kvm->pio_bus,
-				     io->port, io->size, pd)) {
-			r = -EOPNOTSUPP;
-			break;
-		}
-		pd += io->size;
-	}
-	return r;
-}
-
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in, int size, unsigned port)
-{
-	unsigned long val;
-
-	vcpu->run->exit_reason = KVM_EXIT_IO;
-	vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
-	vcpu->run->io.size = vcpu->arch.pio.size = size;
-	vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE;
-	vcpu->run->io.count = vcpu->arch.pio.count = vcpu->arch.pio.cur_count = 1;
-	vcpu->run->io.port = vcpu->arch.pio.port = port;
-	vcpu->arch.pio.in = in;
-	vcpu->arch.pio.string = 0;
-	vcpu->arch.pio.down = 0;
-	vcpu->arch.pio.rep = 0;
-
-	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
-		      size, 1);
+done:
+	if (vcpu->arch.exception.pending)
+		vcpu->arch.emulate_ctxt.restart = false;
 
-	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
-	memcpy(vcpu->arch.pio_data, &val, 4);
+	if (vcpu->arch.emulate_ctxt.restart)
+		goto restart;
 
-	if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
-		complete_pio(vcpu);
-		return 1;
-	}
-	return 0;
+	return EMULATE_DONE;
 }
-EXPORT_SYMBOL_GPL(kvm_emulate_pio);
+EXPORT_SYMBOL_GPL(emulate_instruction);
 
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
-		  int size, unsigned long count, int down,
-		  gva_t address, int rep, unsigned port)
+int kvm_fast_pio_out(struct kvm_vcpu *vcpu, int size, unsigned short port)
 {
-	unsigned now, in_page;
-	int ret = 0;
-
-	vcpu->run->exit_reason = KVM_EXIT_IO;
-	vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
-	vcpu->run->io.size = vcpu->arch.pio.size = size;
-	vcpu->run->io.data_offset = KVM_PIO_PAGE_OFFSET * PAGE_SIZE;
-	vcpu->run->io.count = vcpu->arch.pio.count = vcpu->arch.pio.cur_count = count;
-	vcpu->run->io.port = vcpu->arch.pio.port = port;
-	vcpu->arch.pio.in = in;
-	vcpu->arch.pio.string = 1;
-	vcpu->arch.pio.down = down;
-	vcpu->arch.pio.rep = rep;
-
-	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
-		      size, count);
-
-	if (!count) {
-		kvm_x86_ops->skip_emulated_instruction(vcpu);
-		return 1;
-	}
-
-	if (!down)
-		in_page = PAGE_SIZE - offset_in_page(address);
-	else
-		in_page = offset_in_page(address) + size;
-	now = min(count, (unsigned long)in_page / size);
-	if (!now)
-		now = 1;
-	if (down) {
-		/*
-		 * String I/O in reverse.  Yuck.  Kill the guest, fix later.
-		 */
-		pr_unimpl(vcpu, "guest string pio down\n");
-		kvm_inject_gp(vcpu, 0);
-		return 1;
-	}
-	vcpu->run->io.count = now;
-	vcpu->arch.pio.cur_count = now;
-
-	if (vcpu->arch.pio.cur_count == vcpu->arch.pio.count)
-		kvm_x86_ops->skip_emulated_instruction(vcpu);
-
-	vcpu->arch.pio.guest_gva = address;
-
-	if (!vcpu->arch.pio.in) {
-		/* string PIO write */
-		ret = pio_copy_data(vcpu);
-		if (ret == X86EMUL_PROPAGATE_FAULT) {
-			kvm_inject_gp(vcpu, 0);
-			return 1;
-		}
-		if (ret == 0 && !pio_string_write(vcpu)) {
-			complete_pio(vcpu);
-			if (vcpu->arch.pio.count == 0)
-				ret = 1;
-		}
-	}
-	/* no string PIO read support yet */
-
+	unsigned long val = kvm_register_read(vcpu, VCPU_REGS_RAX);
+	int ret = emulator_pio_out_emulated(size, port, &val, 1, vcpu);
+	/* do not return to emulator after return from userspace */
+	vcpu->arch.pio.count = 0;
 	return ret;
 }
-EXPORT_SYMBOL_GPL(kvm_emulate_pio_string);
+EXPORT_SYMBOL_GPL(kvm_fast_pio_out);
 
 static void bounce_off(void *info)
 {
@@ -3415,6 +4025,51 @@ static void kvm_timer_init(void)
 	}
 }
 
+static DEFINE_PER_CPU(struct kvm_vcpu *, current_vcpu);
+
+static int kvm_is_in_guest(void)
+{
+	return percpu_read(current_vcpu) != NULL;
+}
+
+static int kvm_is_user_mode(void)
+{
+	int user_mode = 3;
+
+	if (percpu_read(current_vcpu))
+		user_mode = kvm_x86_ops->get_cpl(percpu_read(current_vcpu));
+
+	return user_mode != 0;
+}
+
+static unsigned long kvm_get_guest_ip(void)
+{
+	unsigned long ip = 0;
+
+	if (percpu_read(current_vcpu))
+		ip = kvm_rip_read(percpu_read(current_vcpu));
+
+	return ip;
+}
+
+static struct perf_guest_info_callbacks kvm_guest_cbs = {
+	.is_in_guest		= kvm_is_in_guest,
+	.is_user_mode		= kvm_is_user_mode,
+	.get_guest_ip		= kvm_get_guest_ip,
+};
+
+void kvm_before_handle_nmi(struct kvm_vcpu *vcpu)
+{
+	percpu_write(current_vcpu, vcpu);
+}
+EXPORT_SYMBOL_GPL(kvm_before_handle_nmi);
+
+void kvm_after_handle_nmi(struct kvm_vcpu *vcpu)
+{
+	percpu_write(current_vcpu, NULL);
+}
+EXPORT_SYMBOL_GPL(kvm_after_handle_nmi);
+
 int kvm_arch_init(void *opaque)
 {
 	int r;
@@ -3451,6 +4106,8 @@ int kvm_arch_init(void *opaque)
 
 	kvm_timer_init();
 
+	perf_register_guest_info_callbacks(&kvm_guest_cbs);
+
 	return 0;
 
 out:
@@ -3459,6 +4116,8 @@ out:
 
 void kvm_arch_exit(void)
 {
+	perf_unregister_guest_info_callbacks(&kvm_guest_cbs);
+
 	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
 		cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
 					    CPUFREQ_TRANSITION_NOTIFIER);
@@ -3488,11 +4147,76 @@ static inline gpa_t hc_gpa(struct kvm_vcpu *vcpu, unsigned long a0,
 		return a0 | ((gpa_t)a1 << 32);
 }
 
+int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
+{
+	u64 param, ingpa, outgpa, ret;
+	uint16_t code, rep_idx, rep_cnt, res = HV_STATUS_SUCCESS, rep_done = 0;
+	bool fast, longmode;
+	int cs_db, cs_l;
+
+	/*
+	 * hypercall generates UD from non zero cpl and real mode
+	 * per HYPER-V spec
+	 */
+	if (kvm_x86_ops->get_cpl(vcpu) != 0 || !is_protmode(vcpu)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 0;
+	}
+
+	kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
+	longmode = is_long_mode(vcpu) && cs_l == 1;
+
+	if (!longmode) {
+		param = ((u64)kvm_register_read(vcpu, VCPU_REGS_RDX) << 32) |
+			(kvm_register_read(vcpu, VCPU_REGS_RAX) & 0xffffffff);
+		ingpa = ((u64)kvm_register_read(vcpu, VCPU_REGS_RBX) << 32) |
+			(kvm_register_read(vcpu, VCPU_REGS_RCX) & 0xffffffff);
+		outgpa = ((u64)kvm_register_read(vcpu, VCPU_REGS_RDI) << 32) |
+			(kvm_register_read(vcpu, VCPU_REGS_RSI) & 0xffffffff);
+	}
+#ifdef CONFIG_X86_64
+	else {
+		param = kvm_register_read(vcpu, VCPU_REGS_RCX);
+		ingpa = kvm_register_read(vcpu, VCPU_REGS_RDX);
+		outgpa = kvm_register_read(vcpu, VCPU_REGS_R8);
+	}
+#endif
+
+	code = param & 0xffff;
+	fast = (param >> 16) & 0x1;
+	rep_cnt = (param >> 32) & 0xfff;
+	rep_idx = (param >> 48) & 0xfff;
+
+	trace_kvm_hv_hypercall(code, fast, rep_cnt, rep_idx, ingpa, outgpa);
+
+	switch (code) {
+	case HV_X64_HV_NOTIFY_LONG_SPIN_WAIT:
+		kvm_vcpu_on_spin(vcpu);
+		break;
+	default:
+		res = HV_STATUS_INVALID_HYPERCALL_CODE;
+		break;
+	}
+
+	ret = res | (((u64)rep_done & 0xfff) << 32);
+	if (longmode) {
+		kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
+	} else {
+		kvm_register_write(vcpu, VCPU_REGS_RDX, ret >> 32);
+		kvm_register_write(vcpu, VCPU_REGS_RAX, ret & 0xffffffff);
+	}
+
+	return 1;
+}
+
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 {
 	unsigned long nr, a0, a1, a2, a3, ret;
 	int r = 1;
 
+	if (kvm_hv_hypercall_enabled(vcpu->kvm))
+		return kvm_hv_hypercall(vcpu);
+
 	nr = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	a0 = kvm_register_read(vcpu, VCPU_REGS_RBX);
 	a1 = kvm_register_read(vcpu, VCPU_REGS_RCX);
@@ -3535,10 +4259,8 @@ EXPORT_SYMBOL_GPL(kvm_emulate_hypercall);
 int kvm_fix_hypercall(struct kvm_vcpu *vcpu)
 {
 	char instruction[3];
-	int ret = 0;
 	unsigned long rip = kvm_rip_read(vcpu);
 
-
 	/*
 	 * Blow out the MMU to ensure that no other VCPU has an active mapping
 	 * to ensure that the updated hypercall appears atomically across all
@@ -3547,93 +4269,24 @@ int kvm_fix_hypercall(struct kvm_vcpu *vcpu)
 	kvm_mmu_zap_all(vcpu->kvm);
 
 	kvm_x86_ops->patch_hypercall(vcpu, instruction);
-	if (emulator_write_emulated(rip, instruction, 3, vcpu)
-	    != X86EMUL_CONTINUE)
-		ret = -EFAULT;
-
-	return ret;
-}
 
-static u64 mk_cr_64(u64 curr_cr, u32 new_val)
-{
-	return (curr_cr & ~((1ULL << 32) - 1)) | new_val;
+	return emulator_write_emulated(rip, instruction, 3, vcpu);
 }
 
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 limit, unsigned long base)
 {
-	struct descriptor_table dt = { limit, base };
+	struct desc_ptr dt = { limit, base };
 
 	kvm_x86_ops->set_gdt(vcpu, &dt);
 }
 
 void realmode_lidt(struct kvm_vcpu *vcpu, u16 limit, unsigned long base)
 {
-	struct descriptor_table dt = { limit, base };
+	struct desc_ptr dt = { limit, base };
 
 	kvm_x86_ops->set_idt(vcpu, &dt);
 }
 
-void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
-		   unsigned long *rflags)
-{
-	kvm_lmsw(vcpu, msw);
-	*rflags = kvm_get_rflags(vcpu);
-}
-
-unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
-{
-	unsigned long value;
-
-	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
-	switch (cr) {
-	case 0:
-		value = vcpu->arch.cr0;
-		break;
-	case 2:
-		value = vcpu->arch.cr2;
-		break;
-	case 3:
-		value = vcpu->arch.cr3;
-		break;
-	case 4:
-		value = vcpu->arch.cr4;
-		break;
-	case 8:
-		value = kvm_get_cr8(vcpu);
-		break;
-	default:
-		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
-		return 0;
-	}
-
-	return value;
-}
-
-void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
-		     unsigned long *rflags)
-{
-	switch (cr) {
-	case 0:
-		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
-		*rflags = kvm_get_rflags(vcpu);
-		break;
-	case 2:
-		vcpu->arch.cr2 = val;
-		break;
-	case 3:
-		kvm_set_cr3(vcpu, val);
-		break;
-	case 4:
-		kvm_set_cr4(vcpu, mk_cr_64(vcpu->arch.cr4, val));
-		break;
-	case 8:
-		kvm_set_cr8(vcpu, val & 0xfUL);
-		break;
-	default:
-		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
-	}
-}
-
 static int move_to_next_stateful_cpuid_entry(struct kvm_vcpu *vcpu, int i)
 {
 	struct kvm_cpuid_entry2 *e = &vcpu->arch.cpuid_entries[i];
@@ -3691,14 +4344,19 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 	}
 	return best;
 }
+EXPORT_SYMBOL_GPL(kvm_find_cpuid_entry);
 
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
 
+	best = kvm_find_cpuid_entry(vcpu, 0x80000000, 0);
+	if (!best || best->eax < 0x80000008)
+		goto not_found;
 	best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0);
 	if (best)
 		return best->eax & 0xff;
+not_found:
 	return 36;
 }
 
@@ -3774,14 +4432,15 @@ static void vapic_enter(struct kvm_vcpu *vcpu)
 static void vapic_exit(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
+	int idx;
 
 	if (!apic || !apic->vapic_addr)
 		return;
 
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	kvm_release_page_dirty(apic->vapic_page);
 	mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 }
 
 static void update_cr8_intercept(struct kvm_vcpu *vcpu)
@@ -3811,9 +4470,13 @@ static void inject_pending_event(struct kvm_vcpu *vcpu)
 {
 	/* try to reinject previous events if any */
 	if (vcpu->arch.exception.pending) {
+		trace_kvm_inj_exception(vcpu->arch.exception.nr,
+					vcpu->arch.exception.has_error_code,
+					vcpu->arch.exception.error_code);
 		kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
 					  vcpu->arch.exception.has_error_code,
-					  vcpu->arch.exception.error_code);
+					  vcpu->arch.exception.error_code,
+					  vcpu->arch.exception.reinject);
 		return;
 	}
 
@@ -3877,12 +4540,17 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			r = 0;
 			goto out;
 		}
+		if (test_and_clear_bit(KVM_REQ_DEACTIVATE_FPU, &vcpu->requests)) {
+			vcpu->fpu_active = 0;
+			kvm_x86_ops->fpu_deactivate(vcpu);
+		}
 	}
 
 	preempt_disable();
 
 	kvm_x86_ops->prepare_guest_switch(vcpu);
-	kvm_load_guest_fpu(vcpu);
+	if (vcpu->fpu_active)
+		kvm_load_guest_fpu(vcpu);
 
 	local_irq_disable();
 
@@ -3910,7 +4578,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		kvm_lapic_sync_to_vapic(vcpu);
 	}
 
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 
 	kvm_guest_enter();
 
@@ -3952,7 +4620,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 
 	preempt_enable();
 
-	down_read(&vcpu->kvm->slots_lock);
+	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
 
 	/*
 	 * Profile KVM exit RIPs:
@@ -3974,6 +4642,7 @@ out:
 static int __vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int r;
+	struct kvm *kvm = vcpu->kvm;
 
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED)) {
 		pr_debug("vcpu %d received sipi with vector # %x\n",
@@ -3985,7 +4654,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 	}
 
-	down_read(&vcpu->kvm->slots_lock);
+	vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 	vapic_enter(vcpu);
 
 	r = 1;
@@ -3993,9 +4662,9 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
 			r = vcpu_enter_guest(vcpu);
 		else {
-			up_read(&vcpu->kvm->slots_lock);
+			srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 			kvm_vcpu_block(vcpu);
-			down_read(&vcpu->kvm->slots_lock);
+			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 			if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
 			{
 				switch(vcpu->arch.mp_state) {
@@ -4030,14 +4699,13 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 			++vcpu->stat.signal_exits;
 		}
 		if (need_resched()) {
-			up_read(&vcpu->kvm->slots_lock);
+			srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 			kvm_resched(vcpu);
-			down_read(&vcpu->kvm->slots_lock);
+			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 		}
 	}
 
-	up_read(&vcpu->kvm->slots_lock);
-	post_kvm_run_save(vcpu);
+	srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 
 	vapic_exit(vcpu);
 
@@ -4065,24 +4733,17 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	if (!irqchip_in_kernel(vcpu->kvm))
 		kvm_set_cr8(vcpu, kvm_run->cr8);
 
-	if (vcpu->arch.pio.cur_count) {
-		r = complete_pio(vcpu);
-		if (r)
-			goto out;
-	}
-	if (vcpu->mmio_needed) {
-		memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8);
-		vcpu->mmio_read_completed = 1;
-		vcpu->mmio_needed = 0;
-
-		down_read(&vcpu->kvm->slots_lock);
-		r = emulate_instruction(vcpu, vcpu->arch.mmio_fault_cr2, 0,
-					EMULTYPE_NO_DECODE);
-		up_read(&vcpu->kvm->slots_lock);
+	if (vcpu->arch.pio.count || vcpu->mmio_needed ||
+	    vcpu->arch.emulate_ctxt.restart) {
+		if (vcpu->mmio_needed) {
+			memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8);
+			vcpu->mmio_read_completed = 1;
+			vcpu->mmio_needed = 0;
+		}
+		vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
+		r = emulate_instruction(vcpu, 0, 0, EMULTYPE_NO_DECODE);
+		srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 		if (r == EMULATE_DO_MMIO) {
-			/*
-			 * Read-modify-write.  Back to userspace.
-			 */
 			r = 0;
 			goto out;
 		}
@@ -4094,6 +4755,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	r = __vcpu_run(vcpu);
 
 out:
+	post_kvm_run_save(vcpu);
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
@@ -4165,12 +4827,6 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
-void kvm_get_segment(struct kvm_vcpu *vcpu,
-		     struct kvm_segment *var, int seg)
-{
-	kvm_x86_ops->get_segment(vcpu, var, seg);
-}
-
 void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 {
 	struct kvm_segment cs;
@@ -4184,7 +4840,7 @@ EXPORT_SYMBOL_GPL(kvm_get_cs_db_l_bits);
 int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 				  struct kvm_sregs *sregs)
 {
-	struct descriptor_table dt;
+	struct desc_ptr dt;
 
 	vcpu_load(vcpu);
 
@@ -4199,19 +4855,18 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 	kvm_get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	kvm_x86_ops->get_idt(vcpu, &dt);
-	sregs->idt.limit = dt.limit;
-	sregs->idt.base = dt.base;
+	sregs->idt.limit = dt.size;
+	sregs->idt.base = dt.address;
 	kvm_x86_ops->get_gdt(vcpu, &dt);
-	sregs->gdt.limit = dt.limit;
-	sregs->gdt.base = dt.base;
+	sregs->gdt.limit = dt.size;
+	sregs->gdt.base = dt.address;
 
-	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
-	sregs->cr0 = vcpu->arch.cr0;
+	sregs->cr0 = kvm_read_cr0(vcpu);
 	sregs->cr2 = vcpu->arch.cr2;
 	sregs->cr3 = vcpu->arch.cr3;
-	sregs->cr4 = vcpu->arch.cr4;
+	sregs->cr4 = kvm_read_cr4(vcpu);
 	sregs->cr8 = kvm_get_cr8(vcpu);
-	sregs->efer = vcpu->arch.shadow_efer;
+	sregs->efer = vcpu->arch.efer;
 	sregs->apic_base = kvm_get_apic_base(vcpu);
 
 	memset(sregs->interrupt_bitmap, 0, sizeof sregs->interrupt_bitmap);
@@ -4243,428 +4898,33 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static void kvm_set_segment(struct kvm_vcpu *vcpu,
-			struct kvm_segment *var, int seg)
-{
-	kvm_x86_ops->set_segment(vcpu, var, seg);
-}
-
-static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
-				   struct kvm_segment *kvm_desct)
-{
-	kvm_desct->base = get_desc_base(seg_desc);
-	kvm_desct->limit = get_desc_limit(seg_desc);
-	if (seg_desc->g) {
-		kvm_desct->limit <<= 12;
-		kvm_desct->limit |= 0xfff;
-	}
-	kvm_desct->selector = selector;
-	kvm_desct->type = seg_desc->type;
-	kvm_desct->present = seg_desc->p;
-	kvm_desct->dpl = seg_desc->dpl;
-	kvm_desct->db = seg_desc->d;
-	kvm_desct->s = seg_desc->s;
-	kvm_desct->l = seg_desc->l;
-	kvm_desct->g = seg_desc->g;
-	kvm_desct->avl = seg_desc->avl;
-	if (!selector)
-		kvm_desct->unusable = 1;
-	else
-		kvm_desct->unusable = 0;
-	kvm_desct->padding = 0;
-}
-
-static void get_segment_descriptor_dtable(struct kvm_vcpu *vcpu,
-					  u16 selector,
-					  struct descriptor_table *dtable)
-{
-	if (selector & 1 << 2) {
-		struct kvm_segment kvm_seg;
-
-		kvm_get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
-
-		if (kvm_seg.unusable)
-			dtable->limit = 0;
-		else
-			dtable->limit = kvm_seg.limit;
-		dtable->base = kvm_seg.base;
-	}
-	else
-		kvm_x86_ops->get_gdt(vcpu, dtable);
-}
-
-/* allowed just for 8 bytes segments */
-static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-					 struct desc_struct *seg_desc)
-{
-	struct descriptor_table dtable;
-	u16 index = selector >> 3;
-
-	get_segment_descriptor_dtable(vcpu, selector, &dtable);
-
-	if (dtable.limit < index * 8 + 7) {
-		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
-		return 1;
-	}
-	return kvm_read_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
-}
-
-/* allowed just for 8 bytes segments */
-static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-					 struct desc_struct *seg_desc)
-{
-	struct descriptor_table dtable;
-	u16 index = selector >> 3;
-
-	get_segment_descriptor_dtable(vcpu, selector, &dtable);
-
-	if (dtable.limit < index * 8 + 7)
-		return 1;
-	return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
-}
-
-static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu,
-			     struct desc_struct *seg_desc)
-{
-	u32 base_addr = get_desc_base(seg_desc);
-
-	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
-}
-
-static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
-{
-	struct kvm_segment kvm_seg;
-
-	kvm_get_segment(vcpu, &kvm_seg, seg);
-	return kvm_seg.selector;
-}
-
-static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
-						u16 selector,
-						struct kvm_segment *kvm_seg)
-{
-	struct desc_struct seg_desc;
-
-	if (load_guest_segment_descriptor(vcpu, selector, &seg_desc))
-		return 1;
-	seg_desct_to_kvm_desct(&seg_desc, selector, kvm_seg);
-	return 0;
-}
-
-static int kvm_load_realmode_segment(struct kvm_vcpu *vcpu, u16 selector, int seg)
-{
-	struct kvm_segment segvar = {
-		.base = selector << 4,
-		.limit = 0xffff,
-		.selector = selector,
-		.type = 3,
-		.present = 1,
-		.dpl = 3,
-		.db = 0,
-		.s = 1,
-		.l = 0,
-		.g = 0,
-		.avl = 0,
-		.unusable = 0,
-	};
-	kvm_x86_ops->set_segment(vcpu, &segvar, seg);
-	return 0;
-}
-
-static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
+int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
+		    bool has_error_code, u32 error_code)
 {
-	return (seg != VCPU_SREG_LDTR) &&
-		(seg != VCPU_SREG_TR) &&
-		(kvm_get_rflags(vcpu) & X86_EFLAGS_VM);
-}
-
-int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				int type_bits, int seg)
-{
-	struct kvm_segment kvm_seg;
-
-	if (is_vm86_segment(vcpu, seg) || !(vcpu->arch.cr0 & X86_CR0_PE))
-		return kvm_load_realmode_segment(vcpu, selector, seg);
-	if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
-		return 1;
-	kvm_seg.type |= type_bits;
-
-	if (seg != VCPU_SREG_SS && seg != VCPU_SREG_CS &&
-	    seg != VCPU_SREG_LDTR)
-		if (!kvm_seg.s)
-			kvm_seg.unusable = 1;
-
-	kvm_set_segment(vcpu, &kvm_seg, seg);
-	return 0;
-}
-
-static void save_state_to_tss32(struct kvm_vcpu *vcpu,
-				struct tss_segment_32 *tss)
-{
-	tss->cr3 = vcpu->arch.cr3;
-	tss->eip = kvm_rip_read(vcpu);
-	tss->eflags = kvm_get_rflags(vcpu);
-	tss->eax = kvm_register_read(vcpu, VCPU_REGS_RAX);
-	tss->ecx = kvm_register_read(vcpu, VCPU_REGS_RCX);
-	tss->edx = kvm_register_read(vcpu, VCPU_REGS_RDX);
-	tss->ebx = kvm_register_read(vcpu, VCPU_REGS_RBX);
-	tss->esp = kvm_register_read(vcpu, VCPU_REGS_RSP);
-	tss->ebp = kvm_register_read(vcpu, VCPU_REGS_RBP);
-	tss->esi = kvm_register_read(vcpu, VCPU_REGS_RSI);
-	tss->edi = kvm_register_read(vcpu, VCPU_REGS_RDI);
-	tss->es = get_segment_selector(vcpu, VCPU_SREG_ES);
-	tss->cs = get_segment_selector(vcpu, VCPU_SREG_CS);
-	tss->ss = get_segment_selector(vcpu, VCPU_SREG_SS);
-	tss->ds = get_segment_selector(vcpu, VCPU_SREG_DS);
-	tss->fs = get_segment_selector(vcpu, VCPU_SREG_FS);
-	tss->gs = get_segment_selector(vcpu, VCPU_SREG_GS);
-	tss->ldt_selector = get_segment_selector(vcpu, VCPU_SREG_LDTR);
-}
-
-static int load_state_from_tss32(struct kvm_vcpu *vcpu,
-				  struct tss_segment_32 *tss)
-{
-	kvm_set_cr3(vcpu, tss->cr3);
-
-	kvm_rip_write(vcpu, tss->eip);
-	kvm_set_rflags(vcpu, tss->eflags | 2);
-
-	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->eax);
-	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->ecx);
-	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->edx);
-	kvm_register_write(vcpu, VCPU_REGS_RBX, tss->ebx);
-	kvm_register_write(vcpu, VCPU_REGS_RSP, tss->esp);
-	kvm_register_write(vcpu, VCPU_REGS_RBP, tss->ebp);
-	kvm_register_write(vcpu, VCPU_REGS_RSI, tss->esi);
-	kvm_register_write(vcpu, VCPU_REGS_RDI, tss->edi);
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
-		return 1;
-	return 0;
-}
-
-static void save_state_to_tss16(struct kvm_vcpu *vcpu,
-				struct tss_segment_16 *tss)
-{
-	tss->ip = kvm_rip_read(vcpu);
-	tss->flag = kvm_get_rflags(vcpu);
-	tss->ax = kvm_register_read(vcpu, VCPU_REGS_RAX);
-	tss->cx = kvm_register_read(vcpu, VCPU_REGS_RCX);
-	tss->dx = kvm_register_read(vcpu, VCPU_REGS_RDX);
-	tss->bx = kvm_register_read(vcpu, VCPU_REGS_RBX);
-	tss->sp = kvm_register_read(vcpu, VCPU_REGS_RSP);
-	tss->bp = kvm_register_read(vcpu, VCPU_REGS_RBP);
-	tss->si = kvm_register_read(vcpu, VCPU_REGS_RSI);
-	tss->di = kvm_register_read(vcpu, VCPU_REGS_RDI);
-
-	tss->es = get_segment_selector(vcpu, VCPU_SREG_ES);
-	tss->cs = get_segment_selector(vcpu, VCPU_SREG_CS);
-	tss->ss = get_segment_selector(vcpu, VCPU_SREG_SS);
-	tss->ds = get_segment_selector(vcpu, VCPU_SREG_DS);
-	tss->ldt = get_segment_selector(vcpu, VCPU_SREG_LDTR);
-}
-
-static int load_state_from_tss16(struct kvm_vcpu *vcpu,
-				 struct tss_segment_16 *tss)
-{
-	kvm_rip_write(vcpu, tss->ip);
-	kvm_set_rflags(vcpu, tss->flag | 2);
-	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->ax);
-	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->cx);
-	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->dx);
-	kvm_register_write(vcpu, VCPU_REGS_RBX, tss->bx);
-	kvm_register_write(vcpu, VCPU_REGS_RSP, tss->sp);
-	kvm_register_write(vcpu, VCPU_REGS_RBP, tss->bp);
-	kvm_register_write(vcpu, VCPU_REGS_RSI, tss->si);
-	kvm_register_write(vcpu, VCPU_REGS_RDI, tss->di);
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
-		return 1;
-
-	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
-		return 1;
-	return 0;
-}
-
-static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-			      u16 old_tss_sel, u32 old_tss_base,
-			      struct desc_struct *nseg_desc)
-{
-	struct tss_segment_16 tss_segment_16;
-	int ret = 0;
-
-	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
-			   sizeof tss_segment_16))
-		goto out;
-
-	save_state_to_tss16(vcpu, &tss_segment_16);
-
-	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
-			    sizeof tss_segment_16))
-		goto out;
-
-	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
-			   &tss_segment_16, sizeof tss_segment_16))
-		goto out;
-
-	if (old_tss_sel != 0xffff) {
-		tss_segment_16.prev_task_link = old_tss_sel;
-
-		if (kvm_write_guest(vcpu->kvm,
-				    get_tss_base_addr(vcpu, nseg_desc),
-				    &tss_segment_16.prev_task_link,
-				    sizeof tss_segment_16.prev_task_link))
-			goto out;
-	}
-
-	if (load_state_from_tss16(vcpu, &tss_segment_16))
-		goto out;
-
-	ret = 1;
-out:
-	return ret;
-}
-
-static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       u16 old_tss_sel, u32 old_tss_base,
-		       struct desc_struct *nseg_desc)
-{
-	struct tss_segment_32 tss_segment_32;
-	int ret = 0;
-
-	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
-			   sizeof tss_segment_32))
-		goto out;
-
-	save_state_to_tss32(vcpu, &tss_segment_32);
-
-	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
-			    sizeof tss_segment_32))
-		goto out;
-
-	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
-			   &tss_segment_32, sizeof tss_segment_32))
-		goto out;
-
-	if (old_tss_sel != 0xffff) {
-		tss_segment_32.prev_task_link = old_tss_sel;
-
-		if (kvm_write_guest(vcpu->kvm,
-				    get_tss_base_addr(vcpu, nseg_desc),
-				    &tss_segment_32.prev_task_link,
-				    sizeof tss_segment_32.prev_task_link))
-			goto out;
-	}
-
-	if (load_state_from_tss32(vcpu, &tss_segment_32))
-		goto out;
-
-	ret = 1;
-out:
-	return ret;
-}
-
-int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
-{
-	struct kvm_segment tr_seg;
-	struct desc_struct cseg_desc;
-	struct desc_struct nseg_desc;
-	int ret = 0;
-	u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
-	u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
-
-	old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
-
-	/* FIXME: Handle errors. Failure to read either TSS or their
-	 * descriptors should generate a pagefault.
-	 */
-	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
-		goto out;
-
-	if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
-		goto out;
-
-	if (reason != TASK_SWITCH_IRET) {
-		int cpl;
-
-		cpl = kvm_x86_ops->get_cpl(vcpu);
-		if ((tss_selector & 3) > nseg_desc.dpl || cpl > nseg_desc.dpl) {
-			kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
-			return 1;
-		}
-	}
-
-	if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
-		kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
-		return 1;
-	}
-
-	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
-		cseg_desc.type &= ~(1 << 1); //clear the B flag
-		save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
-	}
+	int cs_db, cs_l, ret;
+	cache_all_regs(vcpu);
 
-	if (reason == TASK_SWITCH_IRET) {
-		u32 eflags = kvm_get_rflags(vcpu);
-		kvm_set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
-	}
+	kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
-	/* set back link to prev task only if NT bit is set in eflags
-	   note that old_tss_sel is not used afetr this point */
-	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
-		old_tss_sel = 0xffff;
+	vcpu->arch.emulate_ctxt.vcpu = vcpu;
+	vcpu->arch.emulate_ctxt.eflags = kvm_x86_ops->get_rflags(vcpu);
+	vcpu->arch.emulate_ctxt.eip = kvm_rip_read(vcpu);
+	vcpu->arch.emulate_ctxt.mode =
+		(!is_protmode(vcpu)) ? X86EMUL_MODE_REAL :
+		(vcpu->arch.emulate_ctxt.eflags & X86_EFLAGS_VM)
+		? X86EMUL_MODE_VM86 : cs_l
+		? X86EMUL_MODE_PROT64 :	cs_db
+		? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
-	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_sel,
-					 old_tss_base, &nseg_desc);
-	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_sel,
-					 old_tss_base, &nseg_desc);
+	ret = emulator_task_switch(&vcpu->arch.emulate_ctxt, &emulate_ops,
+				   tss_selector, reason, has_error_code,
+				   error_code);
 
-	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
-		u32 eflags = kvm_get_rflags(vcpu);
-		kvm_set_rflags(vcpu, eflags | X86_EFLAGS_NT);
-	}
+	if (ret)
+		return EMULATE_FAIL;
 
-	if (reason != TASK_SWITCH_IRET) {
-		nseg_desc.type |= (1 << 1);
-		save_guest_segment_descriptor(vcpu, tss_selector,
-					      &nseg_desc);
-	}
-
-	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 | X86_CR0_TS);
-	seg_desct_to_kvm_desct(&nseg_desc, tss_selector, &tr_seg);
-	tr_seg.type = 11;
-	kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
-out:
-	return ret;
+	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
+	return EMULATE_DONE;
 }
 EXPORT_SYMBOL_GPL(kvm_task_switch);
 
@@ -4673,15 +4933,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 {
 	int mmu_reset_needed = 0;
 	int pending_vec, max_bits;
-	struct descriptor_table dt;
+	struct desc_ptr dt;
 
 	vcpu_load(vcpu);
 
-	dt.limit = sregs->idt.limit;
-	dt.base = sregs->idt.base;
+	dt.size = sregs->idt.limit;
+	dt.address = sregs->idt.base;
 	kvm_x86_ops->set_idt(vcpu, &dt);
-	dt.limit = sregs->gdt.limit;
-	dt.base = sregs->gdt.base;
+	dt.size = sregs->gdt.limit;
+	dt.address = sregs->gdt.base;
 	kvm_x86_ops->set_gdt(vcpu, &dt);
 
 	vcpu->arch.cr2 = sregs->cr2;
@@ -4690,17 +4950,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	kvm_set_cr8(vcpu, sregs->cr8);
 
-	mmu_reset_needed |= vcpu->arch.shadow_efer != sregs->efer;
+	mmu_reset_needed |= vcpu->arch.efer != sregs->efer;
 	kvm_x86_ops->set_efer(vcpu, sregs->efer);
 	kvm_set_apic_base(vcpu, sregs->apic_base);
 
-	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
-
-	mmu_reset_needed |= vcpu->arch.cr0 != sregs->cr0;
+	mmu_reset_needed |= kvm_read_cr0(vcpu) != sregs->cr0;
 	kvm_x86_ops->set_cr0(vcpu, sregs->cr0);
 	vcpu->arch.cr0 = sregs->cr0;
 
-	mmu_reset_needed |= vcpu->arch.cr4 != sregs->cr4;
+	mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
 	if (!is_long_mode(vcpu) && is_pae(vcpu)) {
 		load_pdptrs(vcpu, vcpu->arch.cr3);
@@ -4735,7 +4993,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	/* Older userspace won't unhalt the vcpu on reset. */
 	if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
 	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
-	    !(vcpu->arch.cr0 & X86_CR0_PE))
+	    !is_protmode(vcpu))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 	vcpu_put(vcpu);
@@ -4782,11 +5040,9 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 		vcpu->arch.switch_db_regs = (vcpu->arch.dr7 & DR7_BP_EN_MASK);
 	}
 
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
-		vcpu->arch.singlestep_cs =
-			get_segment_selector(vcpu, VCPU_SREG_CS);
-		vcpu->arch.singlestep_rip = kvm_rip_read(vcpu);
-	}
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vcpu->arch.singlestep_rip = kvm_rip_read(vcpu) +
+			get_segment_base(vcpu, VCPU_SREG_CS);
 
 	/*
 	 * Trigger an rflags update that will inject or remove the trace
@@ -4833,11 +5089,12 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 {
 	unsigned long vaddr = tr->linear_address;
 	gpa_t gpa;
+	int idx;
 
 	vcpu_load(vcpu);
-	down_read(&vcpu->kvm->slots_lock);
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, vaddr);
-	up_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+	gpa = kvm_mmu_gva_to_gpa_system(vcpu, vaddr, NULL);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	tr->physical_address = gpa;
 	tr->valid = gpa != UNMAPPED_GVA;
 	tr->writeable = 1;
@@ -4918,14 +5175,14 @@ EXPORT_SYMBOL_GPL(fx_init);
 
 void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	if (!vcpu->fpu_active || vcpu->guest_fpu_loaded)
+	if (vcpu->guest_fpu_loaded)
 		return;
 
 	vcpu->guest_fpu_loaded = 1;
 	kvm_fx_save(&vcpu->arch.host_fx_image);
 	kvm_fx_restore(&vcpu->arch.guest_fx_image);
+	trace_kvm_fpu(1);
 }
-EXPORT_SYMBOL_GPL(kvm_load_guest_fpu);
 
 void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
@@ -4936,8 +5193,9 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 	kvm_fx_save(&vcpu->arch.guest_fx_image);
 	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	++vcpu->stat.fpu_reload;
+	set_bit(KVM_REQ_DEACTIVATE_FPU, &vcpu->requests);
+	trace_kvm_fpu(0);
 }
-EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 {
@@ -5089,11 +5347,13 @@ fail:
 
 void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
+	int idx;
+
 	kfree(vcpu->arch.mce_banks);
 	kvm_free_lapic(vcpu);
-	down_read(&vcpu->kvm->slots_lock);
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
 	kvm_mmu_destroy(vcpu);
-	up_read(&vcpu->kvm->slots_lock);
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	free_page((unsigned long)vcpu->arch.pio_data);
 }
 
@@ -5104,6 +5364,12 @@ struct  kvm *kvm_arch_create_vm(void)
 	if (!kvm)
 		return ERR_PTR(-ENOMEM);
 
+	kvm->arch.aliases = kzalloc(sizeof(struct kvm_mem_aliases), GFP_KERNEL);
+	if (!kvm->arch.aliases) {
+		kfree(kvm);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
 	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
 
@@ -5160,16 +5426,18 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 		put_page(kvm->arch.apic_access_page);
 	if (kvm->arch.ept_identity_pagetable)
 		put_page(kvm->arch.ept_identity_pagetable);
+	cleanup_srcu_struct(&kvm->srcu);
+	kfree(kvm->arch.aliases);
 	kfree(kvm);
 }
 
-int kvm_arch_set_memory_region(struct kvm *kvm,
-				struct kvm_userspace_memory_region *mem,
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+				struct kvm_memory_slot *memslot,
 				struct kvm_memory_slot old,
+				struct kvm_userspace_memory_region *mem,
 				int user_alloc)
 {
-	int npages = mem->memory_size >> PAGE_SHIFT;
-	struct kvm_memory_slot *memslot = &kvm->memslots[mem->slot];
+	int npages = memslot->npages;
 
 	/*To keep backward compatibility with older userspace,
 	 *x86 needs to hanlde !user_alloc case.
@@ -5189,26 +5457,35 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 			if (IS_ERR((void *)userspace_addr))
 				return PTR_ERR((void *)userspace_addr);
 
-			/* set userspace_addr atomically for kvm_hva_to_rmapp */
-			spin_lock(&kvm->mmu_lock);
 			memslot->userspace_addr = userspace_addr;
-			spin_unlock(&kvm->mmu_lock);
-		} else {
-			if (!old.user_alloc && old.rmap) {
-				int ret;
-
-				down_write(&current->mm->mmap_sem);
-				ret = do_munmap(current->mm, old.userspace_addr,
-						old.npages * PAGE_SIZE);
-				up_write(&current->mm->mmap_sem);
-				if (ret < 0)
-					printk(KERN_WARNING
-				       "kvm_vm_ioctl_set_memory_region: "
-				       "failed to munmap memory\n");
-			}
 		}
 	}
 
+
+	return 0;
+}
+
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+				struct kvm_userspace_memory_region *mem,
+				struct kvm_memory_slot old,
+				int user_alloc)
+{
+
+	int npages = mem->memory_size >> PAGE_SHIFT;
+
+	if (!user_alloc && !old.user_alloc && old.rmap && !npages) {
+		int ret;
+
+		down_write(&current->mm->mmap_sem);
+		ret = do_munmap(current->mm, old.userspace_addr,
+				old.npages * PAGE_SIZE);
+		up_write(&current->mm->mmap_sem);
+		if (ret < 0)
+			printk(KERN_WARNING
+			       "kvm_vm_ioctl_set_memory_region: "
+			       "failed to munmap memory\n");
+	}
+
 	spin_lock(&kvm->mmu_lock);
 	if (!kvm->arch.n_requested_mmu_pages) {
 		unsigned int nr_mmu_pages = kvm_mmu_calculate_mmu_pages(kvm);
@@ -5217,8 +5494,6 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 
 	kvm_mmu_slot_remove_write_access(kvm, mem->slot);
 	spin_unlock(&kvm->mmu_lock);
-
-	return 0;
 }
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
@@ -5258,13 +5533,22 @@ int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
 	return kvm_x86_ops->interrupt_allowed(vcpu);
 }
 
+bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip)
+{
+	unsigned long current_rip = kvm_rip_read(vcpu) +
+		get_segment_base(vcpu, VCPU_SREG_CS);
+
+	return current_rip == linear_rip;
+}
+EXPORT_SYMBOL_GPL(kvm_is_linear_rip);
+
 unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu)
 {
 	unsigned long rflags;
 
 	rflags = kvm_x86_ops->get_rflags(vcpu);
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		rflags &= ~(unsigned long)(X86_EFLAGS_TF | X86_EFLAGS_RF);
+		rflags &= ~X86_EFLAGS_TF;
 	return rflags;
 }
 EXPORT_SYMBOL_GPL(kvm_get_rflags);
@@ -5272,10 +5556,8 @@ EXPORT_SYMBOL_GPL(kvm_get_rflags);
 void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP &&
-	    vcpu->arch.singlestep_cs ==
-			get_segment_selector(vcpu, VCPU_SREG_CS) &&
-	    vcpu->arch.singlestep_rip == kvm_rip_read(vcpu))
-		rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+	    kvm_is_linear_rip(vcpu, vcpu->arch.singlestep_rip))
+		rflags |= X86_EFLAGS_TF;
 	kvm_x86_ops->set_rflags(vcpu, rflags);
 }
 EXPORT_SYMBOL_GPL(kvm_set_rflags);
@@ -5291,3 +5573,4 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmexit_inject);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_intr_vmexit);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_invlpga);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_skinit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_intercepts);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 5eadea5..f4b5445 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -2,6 +2,7 @@
 #define ARCH_X86_KVM_X86_H
 
 #include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
 
 static inline void kvm_clear_exception_queue(struct kvm_vcpu *vcpu)
 {
@@ -35,4 +36,43 @@ static inline bool kvm_exception_is_soft(unsigned int nr)
 struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
                                              u32 function, u32 index);
 
+static inline bool is_protmode(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr0_bits(vcpu, X86_CR0_PE);
+}
+
+static inline int is_long_mode(struct kvm_vcpu *vcpu)
+{
+#ifdef CONFIG_X86_64
+	return vcpu->arch.efer & EFER_LMA;
+#else
+	return 0;
+#endif
+}
+
+static inline int is_pae(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr4_bits(vcpu, X86_CR4_PAE);
+}
+
+static inline int is_pse(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr4_bits(vcpu, X86_CR4_PSE);
+}
+
+static inline int is_paging(struct kvm_vcpu *vcpu)
+{
+	return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
+}
+
+static inline struct kvm_mem_aliases *kvm_aliases(struct kvm *kvm)
+{
+	return rcu_dereference_check(kvm->arch.aliases,
+			srcu_read_lock_held(&kvm->srcu)
+			|| lockdep_is_held(&kvm->slots_lock));
+}
+
+void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
+void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
+
 #endif
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7e59dc1..9257510 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -115,7 +115,7 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
-		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+		hcall(call, arg1, arg2, arg3, arg4);
 	} else {
 		lguest_data.hcalls[next_call].arg0 = call;
 		lguest_data.hcalls[next_call].arg1 = arg1;
@@ -145,46 +145,45 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * So, when we're in lazy mode, we call async_hcall() to store the call for
  * future processing:
  */
-static void lazy_hcall1(unsigned long call,
-		       unsigned long arg1)
+static void lazy_hcall1(unsigned long call, unsigned long arg1)
 {
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
-		kvm_hypercall1(call, arg1);
+		hcall(call, arg1, 0, 0, 0);
 	else
 		async_hcall(call, arg1, 0, 0, 0);
 }
 
 /* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
 static void lazy_hcall2(unsigned long call,
-		       unsigned long arg1,
-		       unsigned long arg2)
+			unsigned long arg1,
+			unsigned long arg2)
 {
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
-		kvm_hypercall2(call, arg1, arg2);
+		hcall(call, arg1, arg2, 0, 0);
 	else
 		async_hcall(call, arg1, arg2, 0, 0);
 }
 
 static void lazy_hcall3(unsigned long call,
-		       unsigned long arg1,
-		       unsigned long arg2,
-		       unsigned long arg3)
+			unsigned long arg1,
+			unsigned long arg2,
+			unsigned long arg3)
 {
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
-		kvm_hypercall3(call, arg1, arg2, arg3);
+		hcall(call, arg1, arg2, arg3, 0);
 	else
 		async_hcall(call, arg1, arg2, arg3, 0);
 }
 
 #ifdef CONFIG_X86_PAE
 static void lazy_hcall4(unsigned long call,
-		       unsigned long arg1,
-		       unsigned long arg2,
-		       unsigned long arg3,
-		       unsigned long arg4)
+			unsigned long arg1,
+			unsigned long arg2,
+			unsigned long arg3,
+			unsigned long arg4)
 {
 	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
-		kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+		hcall(call, arg1, arg2, arg3, arg4);
 	else
 		async_hcall(call, arg1, arg2, arg3, arg4);
 }
@@ -196,13 +195,13 @@ static void lazy_hcall4(unsigned long call,
 :*/
 static void lguest_leave_lazy_mmu_mode(void)
 {
-	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+	hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
 	paravirt_leave_lazy_mmu();
 }
 
 static void lguest_end_context_switch(struct task_struct *next)
 {
-	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+	hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
 	paravirt_end_context_switch(next);
 }
 
@@ -286,7 +285,7 @@ static void lguest_write_idt_entry(gate_desc *dt,
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
 	/* Tell Host about this new entry. */
-	kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
+	hcall(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1], 0);
 }
 
 /*
@@ -300,7 +299,7 @@ static void lguest_load_idt(const struct desc_ptr *desc)
 	struct desc_struct *idt = (void *)desc->address;
 
 	for (i = 0; i < (desc->size+1)/8; i++)
-		kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b);
+		hcall(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b, 0);
 }
 
 /*
@@ -321,7 +320,7 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
 	struct desc_struct *gdt = (void *)desc->address;
 
 	for (i = 0; i < (desc->size+1)/8; i++)
-		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
+		hcall(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b, 0);
 }
 
 /*
@@ -334,8 +333,8 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 {
 	native_write_gdt_entry(dt, entrynum, desc, type);
 	/* Tell Host about this new entry. */
-	kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
-		       dt[entrynum].a, dt[entrynum].b);
+	hcall(LHCALL_LOAD_GDT_ENTRY, entrynum,
+	      dt[entrynum].a, dt[entrynum].b, 0);
 }
 
 /*
@@ -931,7 +930,7 @@ static int lguest_clockevent_set_next_event(unsigned long delta,
 	}
 
 	/* Please wake us this far in the future. */
-	kvm_hypercall1(LHCALL_SET_CLOCKEVENT, delta);
+	hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0, 0);
 	return 0;
 }
 
@@ -942,7 +941,7 @@ static void lguest_clockevent_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* A 0 argument shuts the clock down. */
-		kvm_hypercall0(LHCALL_SET_CLOCKEVENT);
+		hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* This is what we expect. */
@@ -1100,7 +1099,7 @@ static void set_lguest_basic_apic_ops(void)
 /* STOP!  Until an interrupt comes in. */
 static void lguest_safe_halt(void)
 {
-	kvm_hypercall0(LHCALL_HALT);
+	hcall(LHCALL_HALT, 0, 0, 0, 0);
 }
 
 /*
@@ -1112,8 +1111,8 @@ static void lguest_safe_halt(void)
  */
 static void lguest_power_off(void)
 {
-	kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
-					LGUEST_SHUTDOWN_POWEROFF);
+	hcall(LHCALL_SHUTDOWN, __pa("Power down"),
+	      LGUEST_SHUTDOWN_POWEROFF, 0, 0);
 }
 
 /*
@@ -1123,7 +1122,7 @@ static void lguest_power_off(void)
  */
 static int lguest_panic(struct notifier_block *nb, unsigned long l, void *p)
 {
-	kvm_hypercall2(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF);
+	hcall(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF, 0, 0);
 	/* The hcall won't return, but to keep gcc happy, we're "done". */
 	return NOTIFY_DONE;
 }
@@ -1162,7 +1161,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 		len = sizeof(scratch) - 1;
 	scratch[len] = '\0';
 	memcpy(scratch, buf, len);
-	kvm_hypercall1(LHCALL_NOTIFY, __pa(scratch));
+	hcall(LHCALL_NOTIFY, __pa(scratch), 0, 0, 0);
 
 	/* This routine returns the number of bytes actually written. */
 	return len;
@@ -1174,7 +1173,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
  */
 static void lguest_restart(char *reason)
 {
-	kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
+	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0, 0);
 }
 
 /*G:050
@@ -1391,7 +1390,6 @@ __init void lguest_init(void)
 #endif
 #ifdef CONFIG_ACPI
 	acpi_disabled = 1;
-	acpi_ht = 0;
 #endif
 
 	/*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 27eac0f..4f420c2f 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -32,7 +32,7 @@ ENTRY(lguest_entry)
 	 */
 	movl $LHCALL_LGUEST_INIT, %eax
 	movl $lguest_data - __PAGE_OFFSET, %ebx
-	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	int $LGUEST_TRAP_ENTRY
 
 	/* Set up the initial stack so we can run C code. */
 	movl $(init_thread_union+THREAD_SIZE),%esp
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index cffd754f..f871e04 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -14,29 +14,31 @@ $(obj)/inat.o: $(obj)/inat-tables.c
 
 clean-files := inat-tables.c
 
-obj-$(CONFIG_SMP) += msr-smp.o
+obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
 
 lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
-lib-$(CONFIG_KPROBES) += insn.o inat.o
+lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o
 
 obj-y += msr.o msr-reg.o msr-reg-export.o
 
 ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
+        lib-y += atomic64_cx8_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
 ifneq ($(CONFIG_X86_CMPXCHG64),y)
-        lib-y += cmpxchg8b_emu.o
+        lib-y += cmpxchg8b_emu.o atomic64_386_32.o
 endif
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
-        obj-y += io_64.o iomap_copy_64.o
+        obj-y += iomap_copy_64.o
         lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
         lib-y += thunk_64.o clear_page_64.o copy_page_64.o
         lib-y += memmove_64.o memset_64.o
         lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o
+	lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem_64.o
 endif
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index 824fa0b..540179e 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -6,225 +6,54 @@
 #include <asm/cmpxchg.h>
 #include <asm/atomic.h>
 
-static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
-{
-	u32 low = new;
-	u32 high = new >> 32;
-
-	asm volatile(
-		LOCK_PREFIX "cmpxchg8b %1\n"
-		     : "+A" (old), "+m" (*ptr)
-		     :  "b" (low),  "c" (high)
-		     );
-	return old;
-}
-
-u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
-{
-	return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
-EXPORT_SYMBOL(atomic64_cmpxchg);
-
-/**
- * atomic64_xchg - xchg atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
- *
- * Atomically xchgs the value of @ptr to @new_val and returns
- * the old value.
- */
-u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
-{
-	/*
-	 * Try first with a (possibly incorrect) assumption about
-	 * what we have there. We'll do two loops most likely,
-	 * but we'll get an ownership MESI transaction straight away
-	 * instead of a read transaction followed by a
-	 * flush-for-ownership transaction:
-	 */
-	u64 old_val, real_val = 0;
-
-	do {
-		old_val = real_val;
-
-		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
-
-	} while (real_val != old_val);
-
-	return old_val;
-}
-EXPORT_SYMBOL(atomic64_xchg);
-
-/**
- * atomic64_set - set atomic64 variable
- * @ptr:      pointer to type atomic64_t
- * @new_val:  value to assign
- *
- * Atomically sets the value of @ptr to @new_val.
- */
-void atomic64_set(atomic64_t *ptr, u64 new_val)
-{
-	atomic64_xchg(ptr, new_val);
-}
-EXPORT_SYMBOL(atomic64_set);
-
-/**
-EXPORT_SYMBOL(atomic64_read);
- * atomic64_add_return - add and return
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr and returns @delta + *@ptr
- */
-noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
-{
-	/*
-	 * Try first with a (possibly incorrect) assumption about
-	 * what we have there. We'll do two loops most likely,
-	 * but we'll get an ownership MESI transaction straight away
-	 * instead of a read transaction followed by a
-	 * flush-for-ownership transaction:
-	 */
-	u64 old_val, new_val, real_val = 0;
-
-	do {
-		old_val = real_val;
-		new_val = old_val + delta;
-
-		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
-
-	} while (real_val != old_val);
-
-	return new_val;
-}
-EXPORT_SYMBOL(atomic64_add_return);
-
-u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
-{
-	return atomic64_add_return(-delta, ptr);
-}
-EXPORT_SYMBOL(atomic64_sub_return);
-
-u64 atomic64_inc_return(atomic64_t *ptr)
-{
-	return atomic64_add_return(1, ptr);
-}
-EXPORT_SYMBOL(atomic64_inc_return);
-
-u64 atomic64_dec_return(atomic64_t *ptr)
-{
-	return atomic64_sub_return(1, ptr);
-}
-EXPORT_SYMBOL(atomic64_dec_return);
-
-/**
- * atomic64_add - add integer to atomic64 variable
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr.
- */
-void atomic64_add(u64 delta, atomic64_t *ptr)
-{
-	atomic64_add_return(delta, ptr);
-}
-EXPORT_SYMBOL(atomic64_add);
-
-/**
- * atomic64_sub - subtract the atomic64 variable
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically subtracts @delta from @ptr.
- */
-void atomic64_sub(u64 delta, atomic64_t *ptr)
-{
-	atomic64_add(-delta, ptr);
-}
-EXPORT_SYMBOL(atomic64_sub);
-
-/**
- * atomic64_sub_and_test - subtract value from variable and test result
- * @delta: integer value to subtract
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically subtracts @delta from @ptr and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
-{
-	u64 new_val = atomic64_sub_return(delta, ptr);
-
-	return new_val == 0;
-}
-EXPORT_SYMBOL(atomic64_sub_and_test);
-
-/**
- * atomic64_inc - increment atomic64 variable
- * @ptr: pointer to type atomic64_t
- *
- * Atomically increments @ptr by 1.
- */
-void atomic64_inc(atomic64_t *ptr)
-{
-	atomic64_add(1, ptr);
-}
-EXPORT_SYMBOL(atomic64_inc);
-
-/**
- * atomic64_dec - decrement atomic64 variable
- * @ptr: pointer to type atomic64_t
- *
- * Atomically decrements @ptr by 1.
- */
-void atomic64_dec(atomic64_t *ptr)
-{
-	atomic64_sub(1, ptr);
-}
-EXPORT_SYMBOL(atomic64_dec);
-
-/**
- * atomic64_dec_and_test - decrement and test
- * @ptr: pointer to type atomic64_t
- *
- * Atomically decrements @ptr by 1 and
- * returns true if the result is 0, or false for all other
- * cases.
- */
-int atomic64_dec_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(1, ptr);
-}
-EXPORT_SYMBOL(atomic64_dec_and_test);
-
-/**
- * atomic64_inc_and_test - increment and test
- * @ptr: pointer to type atomic64_t
- *
- * Atomically increments @ptr by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-int atomic64_inc_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(-1, ptr);
-}
-EXPORT_SYMBOL(atomic64_inc_and_test);
-
-/**
- * atomic64_add_negative - add and test if negative
- * @delta: integer value to add
- * @ptr:   pointer to type atomic64_t
- *
- * Atomically adds @delta to @ptr and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-int atomic64_add_negative(u64 delta, atomic64_t *ptr)
-{
-	s64 new_val = atomic64_add_return(delta, ptr);
-
-	return new_val < 0;
-}
-EXPORT_SYMBOL(atomic64_add_negative);
+long long atomic64_read_cx8(long long, const atomic64_t *v);
+EXPORT_SYMBOL(atomic64_read_cx8);
+long long atomic64_set_cx8(long long, const atomic64_t *v);
+EXPORT_SYMBOL(atomic64_set_cx8);
+long long atomic64_xchg_cx8(long long, unsigned high);
+EXPORT_SYMBOL(atomic64_xchg_cx8);
+long long atomic64_add_return_cx8(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_add_return_cx8);
+long long atomic64_sub_return_cx8(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_sub_return_cx8);
+long long atomic64_inc_return_cx8(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_inc_return_cx8);
+long long atomic64_dec_return_cx8(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_dec_return_cx8);
+long long atomic64_dec_if_positive_cx8(atomic64_t *v);
+EXPORT_SYMBOL(atomic64_dec_if_positive_cx8);
+int atomic64_inc_not_zero_cx8(atomic64_t *v);
+EXPORT_SYMBOL(atomic64_inc_not_zero_cx8);
+int atomic64_add_unless_cx8(atomic64_t *v, long long a, long long u);
+EXPORT_SYMBOL(atomic64_add_unless_cx8);
+
+#ifndef CONFIG_X86_CMPXCHG64
+long long atomic64_read_386(long long, const atomic64_t *v);
+EXPORT_SYMBOL(atomic64_read_386);
+long long atomic64_set_386(long long, const atomic64_t *v);
+EXPORT_SYMBOL(atomic64_set_386);
+long long atomic64_xchg_386(long long, unsigned high);
+EXPORT_SYMBOL(atomic64_xchg_386);
+long long atomic64_add_return_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_add_return_386);
+long long atomic64_sub_return_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_sub_return_386);
+long long atomic64_inc_return_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_inc_return_386);
+long long atomic64_dec_return_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_dec_return_386);
+long long atomic64_add_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_add_386);
+long long atomic64_sub_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_sub_386);
+long long atomic64_inc_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_inc_386);
+long long atomic64_dec_386(long long a, atomic64_t *v);
+EXPORT_SYMBOL(atomic64_dec_386);
+long long atomic64_dec_if_positive_386(atomic64_t *v);
+EXPORT_SYMBOL(atomic64_dec_if_positive_386);
+int atomic64_inc_not_zero_386(atomic64_t *v);
+EXPORT_SYMBOL(atomic64_inc_not_zero_386);
+int atomic64_add_unless_386(atomic64_t *v, long long a, long long u);
+EXPORT_SYMBOL(atomic64_add_unless_386);
+#endif
diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
new file mode 100644
index 0000000..4a5979a
--- /dev/null
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -0,0 +1,174 @@
+/*
+ * atomic64_t for 386/486
+ *
+ * Copyright © 2010  Luca Barbieri
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/dwarf2.h>
+
+/* if you want SMP support, implement these with real spinlocks */
+.macro LOCK reg
+	pushfl
+	CFI_ADJUST_CFA_OFFSET 4
+	cli
+.endm
+
+.macro UNLOCK reg
+	popfl
+	CFI_ADJUST_CFA_OFFSET -4
+.endm
+
+.macro BEGIN func reg
+$v = \reg
+
+ENTRY(atomic64_\func\()_386)
+	CFI_STARTPROC
+	LOCK $v
+
+.macro RETURN
+	UNLOCK $v
+	ret
+.endm
+
+.macro END_
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_386)
+.purgem RETURN
+.purgem END_
+.purgem END
+.endm
+
+.macro END
+RETURN
+END_
+.endm
+.endm
+
+BEGIN read %ecx
+	movl  ($v), %eax
+	movl 4($v), %edx
+END
+
+BEGIN set %esi
+	movl %ebx,  ($v)
+	movl %ecx, 4($v)
+END
+
+BEGIN xchg %esi
+	movl  ($v), %eax
+	movl 4($v), %edx
+	movl %ebx,  ($v)
+	movl %ecx, 4($v)
+END
+
+BEGIN add %ecx
+	addl %eax,  ($v)
+	adcl %edx, 4($v)
+END
+
+BEGIN add_return %ecx
+	addl  ($v), %eax
+	adcl 4($v), %edx
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+END
+
+BEGIN sub %ecx
+	subl %eax,  ($v)
+	sbbl %edx, 4($v)
+END
+
+BEGIN sub_return %ecx
+	negl %edx
+	negl %eax
+	sbbl $0, %edx
+	addl  ($v), %eax
+	adcl 4($v), %edx
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+END
+
+BEGIN inc %esi
+	addl $1,  ($v)
+	adcl $0, 4($v)
+END
+
+BEGIN inc_return %esi
+	movl  ($v), %eax
+	movl 4($v), %edx
+	addl $1, %eax
+	adcl $0, %edx
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+END
+
+BEGIN dec %esi
+	subl $1,  ($v)
+	sbbl $0, 4($v)
+END
+
+BEGIN dec_return %esi
+	movl  ($v), %eax
+	movl 4($v), %edx
+	subl $1, %eax
+	sbbl $0, %edx
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+END
+
+BEGIN add_unless %ecx
+	addl %eax, %esi
+	adcl %edx, %edi
+	addl  ($v), %eax
+	adcl 4($v), %edx
+	cmpl %eax, %esi
+	je 3f
+1:
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+	movl $1, %eax
+2:
+RETURN
+3:
+	cmpl %edx, %edi
+	jne 1b
+	xorl %eax, %eax
+	jmp 2b
+END_
+
+BEGIN inc_not_zero %esi
+	movl  ($v), %eax
+	movl 4($v), %edx
+	testl %eax, %eax
+	je 3f
+1:
+	addl $1, %eax
+	adcl $0, %edx
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+	movl $1, %eax
+2:
+RETURN
+3:
+	testl %edx, %edx
+	jne 1b
+	jmp 2b
+END_
+
+BEGIN dec_if_positive %esi
+	movl  ($v), %eax
+	movl 4($v), %edx
+	subl $1, %eax
+	sbbl $0, %edx
+	js 1f
+	movl %eax,  ($v)
+	movl %edx, 4($v)
+1:
+END
diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
new file mode 100644
index 0000000..71e080d
--- /dev/null
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -0,0 +1,224 @@
+/*
+ * atomic64_t for 586+
+ *
+ * Copyright © 2010  Luca Barbieri
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/dwarf2.h>
+
+.macro SAVE reg
+	pushl %\reg
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET \reg, 0
+.endm
+
+.macro RESTORE reg
+	popl %\reg
+	CFI_ADJUST_CFA_OFFSET -4
+	CFI_RESTORE \reg
+.endm
+
+.macro read64 reg
+	movl %ebx, %eax
+	movl %ecx, %edx
+/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */
+	LOCK_PREFIX
+	cmpxchg8b (\reg)
+.endm
+
+ENTRY(atomic64_read_cx8)
+	CFI_STARTPROC
+
+	read64 %ecx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_read_cx8)
+
+ENTRY(atomic64_set_cx8)
+	CFI_STARTPROC
+
+1:
+/* we don't need LOCK_PREFIX since aligned 64-bit writes
+ * are atomic on 586 and newer */
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_set_cx8)
+
+ENTRY(atomic64_xchg_cx8)
+	CFI_STARTPROC
+
+	movl %ebx, %eax
+	movl %ecx, %edx
+1:
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_xchg_cx8)
+
+.macro addsub_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+	SAVE esi
+	SAVE edi
+
+	movl %eax, %esi
+	movl %edx, %edi
+	movl %ecx, %ebp
+
+	read64 %ebp
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l %esi, %ebx
+	\insc\()l %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE edi
+	RESTORE esi
+	RESTORE ebx
+	RESTORE ebp
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+addsub_return add add adc
+addsub_return sub sub sbb
+
+.macro incdec_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l $1, %ebx
+	\insc\()l $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+incdec_return inc add adc
+incdec_return dec sub sbb
+
+ENTRY(atomic64_dec_if_positive_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	subl $1, %ebx
+	sbb $0, %ecx
+	js 2f
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+2:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_dec_if_positive_cx8)
+
+ENTRY(atomic64_add_unless_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+/* these just push these two parameters on the stack */
+	SAVE edi
+	SAVE esi
+
+	movl %ecx, %ebp
+	movl %eax, %esi
+	movl %edx, %edi
+
+	read64 %ebp
+1:
+	cmpl %eax, 0(%esp)
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl %esi, %ebx
+	adcl %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+	movl $1, %eax
+3:
+	addl $8, %esp
+	CFI_ADJUST_CFA_OFFSET -8
+	RESTORE ebx
+	RESTORE ebp
+	ret
+4:
+	cmpl %edx, 4(%esp)
+	jne 2b
+	xorl %eax, %eax
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_add_unless_cx8)
+
+ENTRY(atomic64_inc_not_zero_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	testl %eax, %eax
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl $1, %ebx
+	adcl $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	movl $1, %eax
+3:
+	RESTORE ebx
+	ret
+4:
+	testl %edx, %edx
+	jne 2b
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/x86/lib/cache-smp.c b/arch/x86/lib/cache-smp.c
new file mode 100644
index 0000000..a3c6688
--- /dev/null
+++ b/arch/x86/lib/cache-smp.c
@@ -0,0 +1,19 @@
+#include <linux/smp.h>
+#include <linux/module.h>
+
+static void __wbinvd(void *dummy)
+{
+	wbinvd();
+}
+
+void wbinvd_on_cpu(int cpu)
+{
+	smp_call_function_single(cpu, __wbinvd, NULL, 1);
+}
+EXPORT_SYMBOL(wbinvd_on_cpu);
+
+int wbinvd_on_all_cpus(void)
+{
+	return on_each_cpu(__wbinvd, NULL, 1);
+}
+EXPORT_SYMBOL(wbinvd_on_all_cpus);
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index cf889d4..71100c9 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -90,12 +90,6 @@ ENTRY(_copy_from_user)
 	CFI_ENDPROC
 ENDPROC(_copy_from_user)
 
-ENTRY(copy_user_generic)
-	CFI_STARTPROC
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
-	CFI_ENDPROC
-ENDPROC(copy_user_generic)
-
 	.section .fixup,"ax"
 	/* must zero dest */
 ENTRY(bad_from_user)
diff --git a/arch/x86/lib/io_64.c b/arch/x86/lib/io_64.c
deleted file mode 100644
index 3f1eb59..0000000
--- a/arch/x86/lib/io_64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <linux/string.h>
-#include <linux/module.h>
-#include <asm/io.h>
-
-void __memcpy_toio(unsigned long dst, const void *src, unsigned len)
-{
-	__inline_memcpy((void *)dst, src, len);
-}
-EXPORT_SYMBOL(__memcpy_toio);
-
-void __memcpy_fromio(void *dst, unsigned long src, unsigned len)
-{
-	__inline_memcpy(dst, (const void *)src, len);
-}
-EXPORT_SYMBOL(__memcpy_fromio);
-
-void memset_io(volatile void __iomem *a, int b, size_t c)
-{
-	/*
-	 * TODO: memset can mangle the IO patterns quite a bit.
-	 * perhaps it would be better to use a dumb one:
-	 */
-	memset((void *)a, b, c);
-}
-EXPORT_SYMBOL(memset_io);
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index ad5441e..f82e884 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -20,12 +20,11 @@
 /*
  * memcpy_c() - fast string ops (REP MOVSQ) based variant.
  *
- * Calls to this get patched into the kernel image via the
+ * This gets patched over the unrolled variant (below) via the
  * alternative instructions framework:
  */
-	ALIGN
-memcpy_c:
-	CFI_STARTPROC
+	.section .altinstr_replacement, "ax", @progbits
+.Lmemcpy_c:
 	movq %rdi, %rax
 
 	movl %edx, %ecx
@@ -35,8 +34,8 @@ memcpy_c:
 	movl %edx, %ecx
 	rep movsb
 	ret
-	CFI_ENDPROC
-ENDPROC(memcpy_c)
+.Lmemcpy_e:
+	.previous
 
 ENTRY(__memcpy)
 ENTRY(memcpy)
@@ -128,16 +127,10 @@ ENDPROC(__memcpy)
 	 * It is also a lot simpler. Use this when possible:
 	 */
 
-	.section .altinstr_replacement, "ax"
-1:	.byte 0xeb				/* jmp <disp8> */
-	.byte (memcpy_c - memcpy) - (2f - 1b)	/* offset */
-2:
-	.previous
-
 	.section .altinstructions, "a"
 	.align 8
 	.quad memcpy
-	.quad 1b
+	.quad .Lmemcpy_c
 	.byte X86_FEATURE_REP_GOOD
 
 	/*
@@ -145,6 +138,6 @@ ENDPROC(__memcpy)
 	 * so it is silly to overwrite itself with nops - reboot is the
 	 * only outcome...
 	 */
-	.byte 2b - 1b
-	.byte 2b - 1b
+	.byte .Lmemcpy_e - .Lmemcpy_c
+	.byte .Lmemcpy_e - .Lmemcpy_c
 	.previous
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 2c59481..e88d3b8 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -12,9 +12,8 @@
  * 
  * rax   original destination
  */	
-	ALIGN
-memset_c:
-	CFI_STARTPROC
+	.section .altinstr_replacement, "ax", @progbits
+.Lmemset_c:
 	movq %rdi,%r9
 	movl %edx,%r8d
 	andl $7,%r8d
@@ -29,8 +28,8 @@ memset_c:
 	rep stosb
 	movq %r9,%rax
 	ret
-	CFI_ENDPROC
-ENDPROC(memset_c)
+.Lmemset_e:
+	.previous
 
 ENTRY(memset)
 ENTRY(__memset)
@@ -118,16 +117,11 @@ ENDPROC(__memset)
 
 #include <asm/cpufeature.h>
 
-	.section .altinstr_replacement,"ax"
-1:	.byte 0xeb				/* jmp <disp8> */
-	.byte (memset_c - memset) - (2f - 1b)	/* offset */
-2:
-	.previous
 	.section .altinstructions,"a"
 	.align 8
 	.quad memset
-	.quad 1b
+	.quad .Lmemset_c
 	.byte X86_FEATURE_REP_GOOD
 	.byte .Lfinal - memset
-	.byte 2b - 1b
+	.byte .Lmemset_e - .Lmemset_c
 	.previous
diff --git a/arch/x86/lib/rwsem_64.S b/arch/x86/lib/rwsem_64.S
new file mode 100644
index 0000000..41fcf00
--- /dev/null
+++ b/arch/x86/lib/rwsem_64.S
@@ -0,0 +1,81 @@
+/*
+ * x86-64 rwsem wrappers
+ *
+ * This interfaces the inline asm code to the slow-path
+ * C routines. We need to save the call-clobbered regs
+ * that the asm does not mark as clobbered, and move the
+ * argument from %rax to %rdi.
+ *
+ * NOTE! We don't need to save %rax, because the functions
+ * will always return the semaphore pointer in %rax (which
+ * is also the input argument to these helpers)
+ *
+ * The following can clobber %rdx because the asm clobbers it:
+ *   call_rwsem_down_write_failed
+ *   call_rwsem_wake
+ * but %rdi, %rsi, %rcx, %r8-r11 always need saving.
+ */
+
+#include <linux/linkage.h>
+#include <asm/rwlock.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+#define save_common_regs \
+	pushq %rdi; \
+	pushq %rsi; \
+	pushq %rcx; \
+	pushq %r8; \
+	pushq %r9; \
+	pushq %r10; \
+	pushq %r11
+
+#define restore_common_regs \
+	popq %r11; \
+	popq %r10; \
+	popq %r9; \
+	popq %r8; \
+	popq %rcx; \
+	popq %rsi; \
+	popq %rdi
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_down_read_failed)
+	save_common_regs
+	pushq %rdx
+	movq %rax,%rdi
+	call rwsem_down_read_failed
+	popq %rdx
+	restore_common_regs
+	ret
+	ENDPROC(call_rwsem_down_read_failed)
+
+ENTRY(call_rwsem_down_write_failed)
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_down_write_failed
+	restore_common_regs
+	ret
+	ENDPROC(call_rwsem_down_write_failed)
+
+ENTRY(call_rwsem_wake)
+	decl %edx	/* do nothing if still outstanding active readers */
+	jnz 1f
+	save_common_regs
+	movq %rax,%rdi
+	call rwsem_wake
+	restore_common_regs
+1:	ret
+	ENDPROC(call_rwsem_wake)
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_downgrade_wake)
+	save_common_regs
+	pushq %rdx
+	movq %rax,%rdi
+	call rwsem_downgrade_wake
+	popq %rdx
+	restore_common_regs
+	ret
+	ENDPROC(call_rwsem_downgrade_wake)
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index aa09870..dc8adad 100644
--- a/arch/x86/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
@@ -30,10 +30,10 @@ static void fclex(void)
 }
 
 /* Needs to be externally visible */
-void finit_task(struct task_struct *tsk)
+void finit_soft_fpu(struct i387_soft_struct *soft)
 {
-	struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
 	struct address *oaddr, *iaddr;
+	memset(soft, 0, sizeof(*soft));
 	soft->cwd = 0x037f;
 	soft->swd = 0;
 	soft->ftop = 0;	/* We don't keep top in the status word internally. */
@@ -52,7 +52,7 @@ void finit_task(struct task_struct *tsk)
 
 void finit(void)
 {
-	finit_task(current);
+	finit_soft_fpu(&current->thread.fpu.state->soft);
 }
 
 /*
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 5d87f58..7718541 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -681,7 +681,7 @@ int fpregs_soft_set(struct task_struct *target,
 		    unsigned int pos, unsigned int count,
 		    const void *kbuf, const void __user *ubuf)
 {
-	struct i387_soft_struct *s387 = &target->thread.xstate->soft;
+	struct i387_soft_struct *s387 = &target->thread.fpu.state->soft;
 	void *space = s387->st_space;
 	int ret;
 	int offset, other, i, tags, regnr, tag, newtop;
@@ -733,7 +733,7 @@ int fpregs_soft_get(struct task_struct *target,
 		    unsigned int pos, unsigned int count,
 		    void *kbuf, void __user *ubuf)
 {
-	struct i387_soft_struct *s387 = &target->thread.xstate->soft;
+	struct i387_soft_struct *s387 = &target->thread.fpu.state->soft;
 	const void *space = s387->st_space;
 	int ret;
 	int offset = (S387->ftop & 7) * 10, other = 80 - offset;
diff --git a/arch/x86/math-emu/fpu_system.h b/arch/x86/math-emu/fpu_system.h
index 50fa0ec..2c61441 100644
--- a/arch/x86/math-emu/fpu_system.h
+++ b/arch/x86/math-emu/fpu_system.h
@@ -31,7 +31,7 @@
 #define SEG_EXPAND_DOWN(s)	(((s).b & ((1 << 11) | (1 << 10))) \
 				 == (1 << 10))
 
-#define I387			(current->thread.xstate)
+#define I387			(current->thread.fpu.state)
 #define FPU_info		(I387->soft.info)
 
 #define FPU_CS			(*(unsigned short *) &(FPU_info->regs->cs))
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 06630d2..a4c7683 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -6,6 +6,7 @@ nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_physaddr.o		:= $(nostackp)
 CFLAGS_setup_nx.o		:= $(nostackp)
 
+obj-$(CONFIG_X86_PAT)		+= pat_rbtree.o
 obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 71da1bc..738e659 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -18,7 +18,7 @@ static inline pte_t gup_get_pte(pte_t *ptep)
 #else
 	/*
 	 * With get_user_pages_fast, we walk down the pagetables without taking
-	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * any locks.  For this we would like to load the pointers atomically,
 	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
 	 * we do have is the guarantee that a pte will only either go from not
 	 * present to present, or present to not present or both -- it will not
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index f46c340..069ce7c 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -9,7 +9,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
 #include <asm/mman.h>
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index d406c52..b278535 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -1,3 +1,4 @@
+#include <linux/gfp.h>
 #include <linux/initrd.h>
 #include <linux/ioport.h>
 #include <linux/swap.h>
@@ -266,16 +267,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	if (!after_bootmem)
 		find_early_table_space(end, use_pse, use_gbpages);
 
-#ifdef CONFIG_X86_32
-	for (i = 0; i < nr_range; i++)
-		kernel_physical_mapping_init(mr[i].start, mr[i].end,
-					     mr[i].page_size_mask);
-	ret = end;
-#else /* CONFIG_X86_64 */
 	for (i = 0; i < nr_range; i++)
 		ret = kernel_physical_mapping_init(mr[i].start, mr[i].end,
 						   mr[i].page_size_mask);
-#endif
 
 #ifdef CONFIG_X86_32
 	early_ioremap_page_table_range_init();
@@ -338,11 +332,23 @@ int devmem_is_allowed(unsigned long pagenr)
 
 void free_init_pages(char *what, unsigned long begin, unsigned long end)
 {
-	unsigned long addr = begin;
+	unsigned long addr;
+	unsigned long begin_aligned, end_aligned;
+
+	/* Make sure boundaries are page aligned */
+	begin_aligned = PAGE_ALIGN(begin);
+	end_aligned   = end & PAGE_MASK;
 
-	if (addr >= end)
+	if (WARN_ON(begin_aligned != begin || end_aligned != end)) {
+		begin = begin_aligned;
+		end   = end_aligned;
+	}
+
+	if (begin >= end)
 		return;
 
+	addr = begin;
+
 	/*
 	 * If debugging page accesses then do not free this memory but
 	 * mark them not present - any buggy init-section access will
@@ -350,7 +356,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	 */
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
-		begin, PAGE_ALIGN(end));
+		begin, end);
 	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
 #else
 	/*
@@ -365,8 +371,7 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	for (; addr < end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
-		memset((void *)(addr & ~(PAGE_SIZE-1)),
-			POISON_FREE_INITMEM, PAGE_SIZE);
+		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
 		free_page(addr);
 		totalram_pages++;
 	}
@@ -383,6 +388,15 @@ void free_initmem(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
-	free_init_pages("initrd memory", start, end);
+	/*
+	 * end could be not aligned, and We can not align that,
+	 * decompresser could be confused by aligned initrd_end
+	 * We already reserve the end partial page before in
+	 *   - i386_start_kernel()
+	 *   - x86_64_start_kernel()
+	 *   - relocate_initrd()
+	 * So here We can do PAGE_ALIGN() safely to get partial page to be freed
+	 */
+	free_init_pages("initrd memory", start, PAGE_ALIGN(end));
 }
 #endif
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9a0c258..bca7909 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -25,11 +25,11 @@
 #include <linux/pfn.h>
 #include <linux/poison.h>
 #include <linux/bootmem.h>
-#include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/memory_hotplug.h>
 #include <linux/initrd.h>
 #include <linux/cpumask.h>
+#include <linux/gfp.h>
 
 #include <asm/asm.h>
 #include <asm/bios_ebda.h>
@@ -241,6 +241,7 @@ kernel_physical_mapping_init(unsigned long start,
 			     unsigned long page_size_mask)
 {
 	int use_pse = page_size_mask == (1<<PG_LEVEL_2M);
+	unsigned long last_map_addr = end;
 	unsigned long start_pfn, end_pfn;
 	pgd_t *pgd_base = swapper_pg_dir;
 	int pgd_idx, pmd_idx, pte_ofs;
@@ -341,9 +342,10 @@ repeat:
 					prot = PAGE_KERNEL_EXEC;
 
 				pages_4k++;
-				if (mapping_iter == 1)
+				if (mapping_iter == 1) {
 					set_pte(pte, pfn_pte(pfn, init_prot));
-				else
+					last_map_addr = (pfn << PAGE_SHIFT) + PAGE_SIZE;
+				} else
 					set_pte(pte, pfn_pte(pfn, prot));
 			}
 		}
@@ -368,7 +370,7 @@ repeat:
 		mapping_iter = 2;
 		goto repeat;
 	}
-	return 0;
+	return last_map_addr;
 }
 
 pte_t *kmap_pte;
@@ -748,6 +750,7 @@ static void __init zone_sizes_init(void)
 	free_area_init_nodes(max_zone_pfns);
 }
 
+#ifndef CONFIG_NO_BOOTMEM
 static unsigned long __init setup_node_bootmem(int nodeid,
 				 unsigned long start_pfn,
 				 unsigned long end_pfn,
@@ -764,13 +767,14 @@ static unsigned long __init setup_node_bootmem(int nodeid,
 	printk(KERN_INFO "  node %d bootmap %08lx - %08lx\n",
 		 nodeid, bootmap, bootmap + bootmap_size);
 	free_bootmem_with_active_regions(nodeid, end_pfn);
-	early_res_to_bootmem(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
 
 	return bootmap + bootmap_size;
 }
+#endif
 
 void __init setup_bootmem_allocator(void)
 {
+#ifndef CONFIG_NO_BOOTMEM
 	int nodeid;
 	unsigned long bootmap_size, bootmap;
 	/*
@@ -782,11 +786,13 @@ void __init setup_bootmem_allocator(void)
 	if (bootmap == -1L)
 		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
 	reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
+#endif
 
 	printk(KERN_INFO "  mapped low ram: 0 - %08lx\n",
 		 max_pfn_mapped<<PAGE_SHIFT);
 	printk(KERN_INFO "  low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT);
 
+#ifndef CONFIG_NO_BOOTMEM
 	for_each_online_node(nodeid) {
 		 unsigned long start_pfn, end_pfn;
 
@@ -804,6 +810,7 @@ void __init setup_bootmem_allocator(void)
 		bootmap = setup_node_bootmem(nodeid, start_pfn, end_pfn,
 						 bootmap);
 	}
+#endif
 
 	after_bootmem = 1;
 }
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5198b9b..ee41bba 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
 #include <linux/nmi.h>
+#include <linux/gfp.h>
 
 #include <asm/processor.h>
 #include <asm/bios_ebda.h>
@@ -49,6 +50,7 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 #include <asm/init.h>
+#include <linux/bootmem.h>
 
 static unsigned long dma_reserve __initdata;
 
@@ -571,6 +573,7 @@ kernel_physical_mapping_init(unsigned long start,
 void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				int acpi, int k8)
 {
+#ifndef CONFIG_NO_BOOTMEM
 	unsigned long bootmap_size, bootmap;
 
 	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
@@ -578,13 +581,15 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 				 PAGE_SIZE);
 	if (bootmap == -1L)
 		panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+	reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
 	/* don't touch min_low_pfn */
 	bootmap_size = init_bootmem_node(NODE_DATA(0), bootmap >> PAGE_SHIFT,
 					 0, end_pfn);
 	e820_register_active_regions(0, start_pfn, end_pfn);
 	free_bootmem_with_active_regions(0, end_pfn);
-	early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
-	reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
+#else
+	e820_register_active_regions(0, start_pfn, end_pfn);
+#endif
 }
 #endif
 
@@ -616,6 +621,21 @@ void __init paging_init(void)
  */
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
+ * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
+ * updating.
+ */
+static void  update_end_of_memory_vars(u64 start, u64 size)
+{
+	unsigned long end_pfn = PFN_UP(start + size);
+
+	if (end_pfn > max_pfn) {
+		max_pfn = end_pfn;
+		max_low_pfn = end_pfn;
+		high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+	}
+}
+
+/*
  * Memory is added always to NORMAL zone. This means you will never get
  * additional DMA/DMA32 memory.
  */
@@ -634,6 +654,9 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	ret = __add_pages(nid, zone, start_pfn, nr_pages);
 	WARN_ON_ONCE(ret);
 
+	/* update max_pfn, max_low_pfn and high_memory */
+	update_end_of_memory_vars(start, size);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(arch_add_memory);
@@ -955,7 +978,7 @@ vmemmap_populate(struct page *start_page, unsigned long size, int node)
 			if (pmd_none(*pmd)) {
 				pte_t entry;
 
-				p = vmemmap_alloc_block(PMD_SIZE, node);
+				p = vmemmap_alloc_block_buf(PMD_SIZE, node);
 				if (!p)
 					return -ENOMEM;
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index c246d25..12e4d2d 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -24,43 +24,6 @@
 
 #include "physaddr.h"
 
-int page_is_ram(unsigned long pagenr)
-{
-	resource_size_t addr, end;
-	int i;
-
-	/*
-	 * A special case is the first 4Kb of memory;
-	 * This is a BIOS owned area, not kernel ram, but generally
-	 * not listed as such in the E820 table.
-	 */
-	if (pagenr == 0)
-		return 0;
-
-	/*
-	 * Second special case: Some BIOSen report the PC BIOS
-	 * area (640->1Mb) as ram even though it is not.
-	 */
-	if (pagenr >= (BIOS_BEGIN >> PAGE_SHIFT) &&
-		    pagenr < (BIOS_END >> PAGE_SHIFT))
-		return 0;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		/*
-		 * Not usable memory:
-		 */
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		addr = (e820.map[i].addr + PAGE_SIZE-1) >> PAGE_SHIFT;
-		end = (e820.map[i].addr + e820.map[i].size) >> PAGE_SHIFT;
-
-
-		if ((pagenr >= addr) && (pagenr < end))
-			return 1;
-	}
-	return 0;
-}
-
 /*
  * Fix up the linear direct mapping of the kernel to avoid cache attribute
  * conflicts.
@@ -422,6 +385,10 @@ void __init early_ioremap_init(void)
 	 * The boot-ioremap range spans multiple pmds, for which
 	 * we are not prepared:
 	 */
+#define __FIXADDR_TOP (-PAGE_SIZE)
+	BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
+		     != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
+#undef __FIXADDR_TOP
 	if (pmd != early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END))) {
 		WARN_ON(1);
 		printk(KERN_WARNING "pmd %p != %p\n",
@@ -481,6 +448,20 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx)
 static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
 static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
 
+void __init fixup_early_ioremap(void)
+{
+	int i;
+
+	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+		if (prev_map[i]) {
+			WARN_ON(1);
+			break;
+		}
+	}
+
+	early_ioremap_init();
+}
+
 static int __init check_early_ioremap_leak(void)
 {
 	int count = 0;
diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 8cc1833..b3b531a 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -337,7 +337,7 @@ bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
 	if (!shadow)
 		return true;
 
-	status = kmemcheck_shadow_test(shadow, size);
+	status = kmemcheck_shadow_test_all(shadow, size);
 
 	return status == KMEMCHECK_SHADOW_INITIALIZED;
 }
diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
index 3f66b82..aec1242 100644
--- a/arch/x86/mm/kmemcheck/shadow.c
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -125,12 +125,12 @@ void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n)
 
 enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
 {
+#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
 	uint8_t *x;
 	unsigned int i;
 
 	x = shadow;
 
-#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
 	/*
 	 * Make sure _some_ bytes are initialized. Gcc frequently generates
 	 * code to access neighboring bytes.
@@ -139,13 +139,25 @@ enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
 		if (x[i] == KMEMCHECK_SHADOW_INITIALIZED)
 			return x[i];
 	}
+
+	return x[0];
 #else
+	return kmemcheck_shadow_test_all(shadow, size);
+#endif
+}
+
+enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow, unsigned int size)
+{
+	uint8_t *x;
+	unsigned int i;
+
+	x = shadow;
+
 	/* All bytes must be initialized. */
 	for (i = 0; i < size; ++i) {
 		if (x[i] != KMEMCHECK_SHADOW_INITIALIZED)
 			return x[i];
 	}
-#endif
 
 	return x[0];
 }
diff --git a/arch/x86/mm/kmemcheck/shadow.h b/arch/x86/mm/kmemcheck/shadow.h
index af46d9a..ff0b2f7 100644
--- a/arch/x86/mm/kmemcheck/shadow.h
+++ b/arch/x86/mm/kmemcheck/shadow.h
@@ -11,6 +11,8 @@ enum kmemcheck_shadow {
 void *kmemcheck_shadow_lookup(unsigned long address);
 
 enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size);
+enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow,
+						unsigned int size);
 void kmemcheck_shadow_set(void *shadow, unsigned int size);
 
 #endif
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 536fb68..5d0e67f 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -21,6 +21,7 @@
 #include <linux/kdebug.h>
 #include <linux/mutex.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <linux/errno.h>
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index c8191de..1dab519 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -71,7 +71,7 @@ static int mmap_is_legacy(void)
 	if (current->personality & ADDR_COMPAT_LAYOUT)
 		return 1;
 
-	if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
 		return 1;
 
 	return sysctl_legacy_va_layout;
@@ -96,7 +96,7 @@ static unsigned long mmap_rnd(void)
 
 static unsigned long mmap_base(void)
 {
-	unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+	unsigned long gap = rlimit(RLIMIT_STACK);
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 34a3291..3adff7d 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -26,6 +26,7 @@
 
 #include <linux/module.h>
 #include <linux/debugfs.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/version.h>
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 550df48..787c52c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -3,12 +3,6 @@
 #include <linux/module.h>
 #include <linux/bootmem.h>
 
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-# define DBG(x...) printk(KERN_DEBUG x)
-#else
-# define DBG(x...)
-#endif
-
 /*
  * Which logical CPUs are on which nodes
  */
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index b20760c..809baaa 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -418,7 +418,10 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
 
 	for_each_online_node(nid) {
 		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+		NODE_DATA(nid)->node_id = nid;
+#ifndef CONFIG_NO_BOOTMEM
 		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+#endif
 	}
 
 	setup_bootmem_allocator();
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 83bbc70..a7bcc23 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -33,9 +33,6 @@ int numa_off __initdata;
 static unsigned long __initdata nodemap_addr;
 static unsigned long __initdata nodemap_size;
 
-DEFINE_PER_CPU(int, node_number) = 0;
-EXPORT_PER_CPU_SYMBOL(node_number);
-
 /*
  * Map cpu index to node index
  */
@@ -163,30 +160,48 @@ static void * __init early_node_mem(int nodeid, unsigned long start,
 				    unsigned long end, unsigned long size,
 				    unsigned long align)
 {
-	unsigned long mem = find_e820_area(start, end, size, align);
-	void *ptr;
+	unsigned long mem;
+
+	/*
+	 * put it on high as possible
+	 * something will go with NODE_DATA
+	 */
+	if (start < (MAX_DMA_PFN<<PAGE_SHIFT))
+		start = MAX_DMA_PFN<<PAGE_SHIFT;
+	if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) &&
+	    end > (MAX_DMA32_PFN<<PAGE_SHIFT))
+		start = MAX_DMA32_PFN<<PAGE_SHIFT;
+	mem = find_e820_area(start, end, size, align);
+	if (mem != -1L)
+		return __va(mem);
 
+	/* extend the search scope */
+	end = max_pfn_mapped << PAGE_SHIFT;
+	if (end > (MAX_DMA32_PFN<<PAGE_SHIFT))
+		start = MAX_DMA32_PFN<<PAGE_SHIFT;
+	else
+		start = MAX_DMA_PFN<<PAGE_SHIFT;
+	mem = find_e820_area(start, end, size, align);
 	if (mem != -1L)
 		return __va(mem);
 
-	ptr = __alloc_bootmem_nopanic(size, align, __pa(MAX_DMA_ADDRESS));
-	if (ptr == NULL) {
-		printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
+	printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
 		       size, nodeid);
-		return NULL;
-	}
-	return ptr;
+
+	return NULL;
 }
 
 /* Initialize bootmem allocator for a node */
 void __init
 setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 {
-	unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
+	unsigned long start_pfn, last_pfn, nodedata_phys;
 	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
-	unsigned long bootmap_start, nodedata_phys;
-	void *bootmap;
 	int nid;
+#ifndef CONFIG_NO_BOOTMEM
+	unsigned long bootmap_start, bootmap_pages, bootmap_size;
+	void *bootmap;
+#endif
 
 	if (!end)
 		return;
@@ -200,7 +215,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 
 	start = roundup(start, ZONE_ALIGN);
 
-	printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
+	printk(KERN_INFO "Initmem setup node %d %016lx-%016lx\n", nodeid,
 	       start, end);
 
 	start_pfn = start >> PAGE_SHIFT;
@@ -211,14 +226,21 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 	if (node_data[nodeid] == NULL)
 		return;
 	nodedata_phys = __pa(node_data[nodeid]);
+	reserve_early(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA");
 	printk(KERN_INFO "  NODE_DATA [%016lx - %016lx]\n", nodedata_phys,
 		nodedata_phys + pgdat_size - 1);
+	nid = phys_to_nid(nodedata_phys);
+	if (nid != nodeid)
+		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nodeid, nid);
 
 	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
+	NODE_DATA(nodeid)->node_id = nodeid;
 	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
 	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
+#ifndef CONFIG_NO_BOOTMEM
+	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
+
 	/*
 	 * Find a place for the bootmem map
 	 * nodedata_phys could be on other nodes by alloc_bootmem,
@@ -227,11 +249,7 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 	 * of alloc_bootmem, that could clash with reserved range
 	 */
 	bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn);
-	nid = phys_to_nid(nodedata_phys);
-	if (nid == nodeid)
-		bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
-	else
-		bootmap_start = roundup(start, PAGE_SIZE);
+	bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
 	/*
 	 * SMP_CACHE_BYTES could be enough, but init_bootmem_node like
 	 * to use that to align to PAGE_SIZE
@@ -239,18 +257,13 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 	bootmap = early_node_mem(nodeid, bootmap_start, end,
 				 bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
 	if (bootmap == NULL)  {
-		if (nodedata_phys < start || nodedata_phys >= end) {
-			/*
-			 * only need to free it if it is from other node
-			 * bootmem
-			 */
-			if (nid != nodeid)
-				free_bootmem(nodedata_phys, pgdat_size);
-		}
+		free_early(nodedata_phys, nodedata_phys + pgdat_size);
 		node_data[nodeid] = NULL;
 		return;
 	}
 	bootmap_start = __pa(bootmap);
+	reserve_early(bootmap_start, bootmap_start+(bootmap_pages<<PAGE_SHIFT),
+			"BOOTMAP");
 
 	bootmap_size = init_bootmem_node(NODE_DATA(nodeid),
 					 bootmap_start >> PAGE_SHIFT,
@@ -259,31 +272,12 @@ setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
 	printk(KERN_INFO "  bootmap [%016lx -  %016lx] pages %lx\n",
 		 bootmap_start, bootmap_start + bootmap_size - 1,
 		 bootmap_pages);
-
-	free_bootmem_with_active_regions(nodeid, end);
-
-	/*
-	 * convert early reserve to bootmem reserve earlier
-	 * otherwise early_node_mem could use early reserved mem
-	 * on previous node
-	 */
-	early_res_to_bootmem(start, end);
-
-	/*
-	 * in some case early_node_mem could use alloc_bootmem
-	 * to get range on other node, don't reserve that again
-	 */
-	if (nid != nodeid)
-		printk(KERN_INFO "    NODE_DATA(%d) on node %d\n", nodeid, nid);
-	else
-		reserve_bootmem_node(NODE_DATA(nodeid), nodedata_phys,
-					pgdat_size, BOOTMEM_DEFAULT);
 	nid = phys_to_nid(bootmap_start);
 	if (nid != nodeid)
 		printk(KERN_INFO "    bootmap(%d) on node %d\n", nodeid, nid);
-	else
-		reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start,
-				 bootmap_pages<<PAGE_SHIFT, BOOTMEM_DEFAULT);
+
+	free_bootmem_with_active_regions(nodeid, end);
+#endif
 
 	node_set_online(nodeid);
 }
@@ -427,7 +421,7 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr,
 	 * Calculate the number of big nodes that can be allocated as a result
 	 * of consolidating the remainder.
 	 */
-	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) & nr_nodes) /
+	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) * nr_nodes) /
 		FAKE_NODE_MIN_SIZE;
 
 	size &= FAKE_NODE_MIN_HASH_MASK;
@@ -502,77 +496,99 @@ static int __init split_nodes_interleave(u64 addr, u64 max_addr,
 }
 
 /*
- * Splits num_nodes nodes up equally starting at node_start.  The return value
- * is the number of nodes split up and addr is adjusted to be at the end of the
- * last node allocated.
+ * Returns the end address of a node so that there is at least `size' amount of
+ * non-reserved memory or `max_addr' is reached.
  */
-static int __init split_nodes_equally(u64 *addr, u64 max_addr, int node_start,
-				      int num_nodes)
+static u64 __init find_end_of_node(u64 start, u64 max_addr, u64 size)
 {
-	unsigned int big;
-	u64 size;
-	int i;
-
-	if (num_nodes <= 0)
-		return -1;
-	if (num_nodes > MAX_NUMNODES)
-		num_nodes = MAX_NUMNODES;
-	size = (max_addr - *addr - e820_hole_size(*addr, max_addr)) /
-	       num_nodes;
-	/*
-	 * Calculate the number of big nodes that can be allocated as a result
-	 * of consolidating the leftovers.
-	 */
-	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) * num_nodes) /
-	      FAKE_NODE_MIN_SIZE;
+	u64 end = start + size;
 
-	/* Round down to nearest FAKE_NODE_MIN_SIZE. */
-	size &= FAKE_NODE_MIN_HASH_MASK;
-	if (!size) {
-		printk(KERN_ERR "Not enough memory for each node.  "
-		       "NUMA emulation disabled.\n");
-		return -1;
-	}
-
-	for (i = node_start; i < num_nodes + node_start; i++) {
-		u64 end = *addr + size;
-
-		if (i < big)
-			end += FAKE_NODE_MIN_SIZE;
-		/*
-		 * The final node can have the remaining system RAM.  Other
-		 * nodes receive roughly the same amount of available pages.
-		 */
-		if (i == num_nodes + node_start - 1)
+	while (end - start - e820_hole_size(start, end) < size) {
+		end += FAKE_NODE_MIN_SIZE;
+		if (end > max_addr) {
 			end = max_addr;
-		else
-			while (end - *addr - e820_hole_size(*addr, end) <
-			       size) {
-				end += FAKE_NODE_MIN_SIZE;
-				if (end > max_addr) {
-					end = max_addr;
-					break;
-				}
-			}
-		if (setup_node_range(i, addr, end - *addr, max_addr) < 0)
 			break;
+		}
 	}
-	return i - node_start + 1;
+	return end;
 }
 
 /*
- * Splits the remaining system RAM into chunks of size.  The remaining memory is
- * always assigned to a final node and can be asymmetric.  Returns the number of
- * nodes split.
+ * Sets up fake nodes of `size' interleaved over physical nodes ranging from
+ * `addr' to `max_addr'.  The return value is the number of nodes allocated.
  */
-static int __init split_nodes_by_size(u64 *addr, u64 max_addr, int node_start,
-				      u64 size)
+static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size)
 {
-	int i = node_start;
-	size = (size << 20) & FAKE_NODE_MIN_HASH_MASK;
-	while (!setup_node_range(i++, addr, size, max_addr))
-		;
-	return i - node_start;
+	nodemask_t physnode_mask = NODE_MASK_NONE;
+	u64 min_size;
+	int ret = 0;
+	int i;
+
+	if (!size)
+		return -1;
+	/*
+	 * The limit on emulated nodes is MAX_NUMNODES, so the size per node is
+	 * increased accordingly if the requested size is too small.  This
+	 * creates a uniform distribution of node sizes across the entire
+	 * machine (but not necessarily over physical nodes).
+	 */
+	min_size = (max_addr - addr - e820_hole_size(addr, max_addr)) /
+						MAX_NUMNODES;
+	min_size = max(min_size, FAKE_NODE_MIN_SIZE);
+	if ((min_size & FAKE_NODE_MIN_HASH_MASK) < min_size)
+		min_size = (min_size + FAKE_NODE_MIN_SIZE) &
+						FAKE_NODE_MIN_HASH_MASK;
+	if (size < min_size) {
+		pr_err("Fake node size %LuMB too small, increasing to %LuMB\n",
+			size >> 20, min_size >> 20);
+		size = min_size;
+	}
+	size &= FAKE_NODE_MIN_HASH_MASK;
+
+	for (i = 0; i < MAX_NUMNODES; i++)
+		if (physnodes[i].start != physnodes[i].end)
+			node_set(i, physnode_mask);
+	/*
+	 * Fill physical nodes with fake nodes of size until there is no memory
+	 * left on any of them.
+	 */
+	while (nodes_weight(physnode_mask)) {
+		for_each_node_mask(i, physnode_mask) {
+			u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT;
+			u64 end;
+
+			end = find_end_of_node(physnodes[i].start,
+						physnodes[i].end, size);
+			/*
+			 * If there won't be at least FAKE_NODE_MIN_SIZE of
+			 * non-reserved memory in ZONE_DMA32 for the next node,
+			 * this one must extend to the boundary.
+			 */
+			if (end < dma32_end && dma32_end - end -
+			    e820_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+				end = dma32_end;
+
+			/*
+			 * If there won't be enough non-reserved memory for the
+			 * next node, this one must extend to the end of the
+			 * physical node.
+			 */
+			if (physnodes[i].end - end -
+			    e820_hole_size(end, physnodes[i].end) < size)
+				end = physnodes[i].end;
+
+			/*
+			 * Setup the fake node that will be allocated as bootmem
+			 * later.  If setup_node_range() returns non-zero, there
+			 * is no more memory available on this physical node.
+			 */
+			if (setup_node_range(ret++, &physnodes[i].start,
+						end - physnodes[i].start,
+						physnodes[i].end) < 0)
+				node_clear(i, physnode_mask);
+		}
+	}
+	return ret;
 }
 
 /*
@@ -582,87 +598,32 @@ static int __init split_nodes_by_size(u64 *addr, u64 max_addr, int node_start,
 static int __init numa_emulation(unsigned long start_pfn,
 			unsigned long last_pfn, int acpi, int k8)
 {
-	u64 size, addr = start_pfn << PAGE_SHIFT;
+	u64 addr = start_pfn << PAGE_SHIFT;
 	u64 max_addr = last_pfn << PAGE_SHIFT;
-	int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i;
 	int num_phys_nodes;
+	int num_nodes;
+	int i;
 
 	num_phys_nodes = setup_physnodes(addr, max_addr, acpi, k8);
 	/*
-	 * If the numa=fake command-line is just a single number N, split the
-	 * system RAM into N fake nodes.
+	 * If the numa=fake command-line contains a 'M' or 'G', it represents
+	 * the fixed node size.  Otherwise, if it is just a single number N,
+	 * split the system RAM into N fake nodes.
 	 */
-	if (!strchr(cmdline, '*') && !strchr(cmdline, ',')) {
-		long n = simple_strtol(cmdline, NULL, 0);
-
-		num_nodes = split_nodes_interleave(addr, max_addr,
-							num_phys_nodes, n);
-		if (num_nodes < 0)
-			return num_nodes;
-		goto out;
-	}
+	if (strchr(cmdline, 'M') || strchr(cmdline, 'G')) {
+		u64 size;
 
-	/* Parse the command line. */
-	for (coeff_flag = 0; ; cmdline++) {
-		if (*cmdline && isdigit(*cmdline)) {
-			num = num * 10 + *cmdline - '0';
-			continue;
-		}
-		if (*cmdline == '*') {
-			if (num > 0)
-				coeff = num;
-			coeff_flag = 1;
-		}
-		if (!*cmdline || *cmdline == ',') {
-			if (!coeff_flag)
-				coeff = 1;
-			/*
-			 * Round down to the nearest FAKE_NODE_MIN_SIZE.
-			 * Command-line coefficients are in megabytes.
-			 */
-			size = ((u64)num << 20) & FAKE_NODE_MIN_HASH_MASK;
-			if (size)
-				for (i = 0; i < coeff; i++, num_nodes++)
-					if (setup_node_range(num_nodes, &addr,
-						size, max_addr) < 0)
-						goto done;
-			if (!*cmdline)
-				break;
-			coeff_flag = 0;
-			coeff = -1;
-		}
-		num = 0;
-	}
-done:
-	if (!num_nodes)
-		return -1;
-	/* Fill remainder of system RAM, if appropriate. */
-	if (addr < max_addr) {
-		if (coeff_flag && coeff < 0) {
-			/* Split remaining nodes into num-sized chunks */
-			num_nodes += split_nodes_by_size(&addr, max_addr,
-							 num_nodes, num);
-			goto out;
-		}
-		switch (*(cmdline - 1)) {
-		case '*':
-			/* Split remaining nodes into coeff chunks */
-			if (coeff <= 0)
-				break;
-			num_nodes += split_nodes_equally(&addr, max_addr,
-							 num_nodes, coeff);
-			break;
-		case ',':
-			/* Do not allocate remaining system RAM */
-			break;
-		default:
-			/* Give one final node */
-			setup_node_range(num_nodes, &addr, max_addr - addr,
-					 max_addr);
-			num_nodes++;
-		}
+		size = memparse(cmdline, &cmdline);
+		num_nodes = split_nodes_size_interleave(addr, max_addr, size);
+	} else {
+		unsigned long n;
+
+		n = simple_strtoul(cmdline, NULL, 0);
+		num_nodes = split_nodes_interleave(addr, max_addr, num_phys_nodes, n);
 	}
-out:
+
+	if (num_nodes < 0)
+		return num_nodes;
 	memnode_shift = compute_hash_shift(nodes, num_nodes, NULL);
 	if (memnode_shift < 0) {
 		memnode_shift = 0;
@@ -742,6 +703,10 @@ unsigned long __init numa_free_all_bootmem(void)
 	for_each_online_node(i)
 		pages += free_all_bootmem_node(NODE_DATA(i));
 
+#ifdef CONFIG_NO_BOOTMEM
+	pages += free_all_memory_core_early(MAX_NUMNODES);
+#endif
+
 	return pages;
 }
 
@@ -841,7 +806,7 @@ void __cpuinit numa_set_node(int cpu, int node)
 	per_cpu(x86_cpu_to_node_map, cpu) = node;
 
 	if (node != NUMA_NO_NODE)
-		per_cpu(node_number, cpu) = node;
+		set_cpu_numa_node(cpu, node);
 }
 
 void __cpuinit numa_clear_node(int cpu)
@@ -899,7 +864,7 @@ void __cpuinit numa_remove_cpu(int cpu)
 	numa_set_cpumask(cpu, 0);
 }
 
-int cpu_to_node(int cpu)
+int __cpu_to_node(int cpu)
 {
 	if (early_per_cpu_ptr(x86_cpu_to_node_map)) {
 		printk(KERN_WARNING
@@ -909,7 +874,7 @@ int cpu_to_node(int cpu)
 	}
 	return per_cpu(x86_cpu_to_node_map, cpu);
 }
-EXPORT_SYMBOL(cpu_to_node);
+EXPORT_SYMBOL(__cpu_to_node);
 
 /*
  * Same function as cpu_to_node() but used if called before the
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1d4eb93..532e793 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -6,13 +6,13 @@
 #include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/pfn.h>
 #include <linux/percpu.h>
+#include <linux/gfp.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -291,8 +291,29 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 	 */
 	if (kernel_set_to_readonly &&
 	    within(address, (unsigned long)_text,
-		   (unsigned long)__end_rodata_hpage_align))
-		pgprot_val(forbidden) |= _PAGE_RW;
+		   (unsigned long)__end_rodata_hpage_align)) {
+		unsigned int level;
+
+		/*
+		 * Don't enforce the !RW mapping for the kernel text mapping,
+		 * if the current mapping is already using small page mapping.
+		 * No need to work hard to preserve large page mappings in this
+		 * case.
+		 *
+		 * This also fixes the Linux Xen paravirt guest boot failure
+		 * (because of unexpected read-only mappings for kernel identity
+		 * mappings). In this paravirt guest case, the kernel text
+		 * mapping and the kernel identity mapping share the same
+		 * page-table pages. Thus we can't really use different
+		 * protections for the kernel text and identity mappings. Also,
+		 * these shared mappings are made of small page mappings.
+		 * Thus this don't enforce !RW mapping for small page kernel
+		 * text mapping logic will help Linux Xen parvirt guest boot
+		 * aswell.
+		 */
+		if (lookup_address(address, &level) && (level != PG_LEVEL_4K))
+			pgprot_val(forbidden) |= _PAGE_RW;
+	}
 #endif
 
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
@@ -976,7 +997,8 @@ out_err:
 }
 EXPORT_SYMBOL(set_memory_uc);
 
-int set_memory_array_uc(unsigned long *addr, int addrinarray)
+int _set_memory_array(unsigned long *addr, int addrinarray,
+		unsigned long new_type)
 {
 	int i, j;
 	int ret;
@@ -986,13 +1008,19 @@ int set_memory_array_uc(unsigned long *addr, int addrinarray)
 	 */
 	for (i = 0; i < addrinarray; i++) {
 		ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
-					_PAGE_CACHE_UC_MINUS, NULL);
+					new_type, NULL);
 		if (ret)
 			goto out_free;
 	}
 
 	ret = change_page_attr_set(addr, addrinarray,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 1);
+
+	if (!ret && new_type == _PAGE_CACHE_WC)
+		ret = change_page_attr_set_clr(addr, addrinarray,
+					       __pgprot(_PAGE_CACHE_WC),
+					       __pgprot(_PAGE_CACHE_MASK),
+					       0, CPA_ARRAY, NULL);
 	if (ret)
 		goto out_free;
 
@@ -1004,8 +1032,19 @@ out_free:
 
 	return ret;
 }
+
+int set_memory_array_uc(unsigned long *addr, int addrinarray)
+{
+	return _set_memory_array(addr, addrinarray, _PAGE_CACHE_UC_MINUS);
+}
 EXPORT_SYMBOL(set_memory_array_uc);
 
+int set_memory_array_wc(unsigned long *addr, int addrinarray)
+{
+	return _set_memory_array(addr, addrinarray, _PAGE_CACHE_WC);
+}
+EXPORT_SYMBOL(set_memory_array_wc);
+
 int _set_memory_wc(unsigned long addr, int numpages)
 {
 	int ret;
@@ -1132,26 +1171,34 @@ int set_pages_uc(struct page *page, int numpages)
 }
 EXPORT_SYMBOL(set_pages_uc);
 
-int set_pages_array_uc(struct page **pages, int addrinarray)
+static int _set_pages_array(struct page **pages, int addrinarray,
+		unsigned long new_type)
 {
 	unsigned long start;
 	unsigned long end;
 	int i;
 	int free_idx;
+	int ret;
 
 	for (i = 0; i < addrinarray; i++) {
 		if (PageHighMem(pages[i]))
 			continue;
 		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
-		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
+		if (reserve_memtype(start, end, new_type, NULL))
 			goto err_out;
 	}
 
-	if (cpa_set_pages_array(pages, addrinarray,
-			__pgprot(_PAGE_CACHE_UC_MINUS)) == 0) {
-		return 0; /* Success */
-	}
+	ret = cpa_set_pages_array(pages, addrinarray,
+			__pgprot(_PAGE_CACHE_UC_MINUS));
+	if (!ret && new_type == _PAGE_CACHE_WC)
+		ret = change_page_attr_set_clr(NULL, addrinarray,
+					       __pgprot(_PAGE_CACHE_WC),
+					       __pgprot(_PAGE_CACHE_MASK),
+					       0, CPA_PAGES_ARRAY, pages);
+	if (ret)
+		goto err_out;
+	return 0; /* Success */
 err_out:
 	free_idx = i;
 	for (i = 0; i < free_idx; i++) {
@@ -1163,8 +1210,19 @@ err_out:
 	}
 	return -EINVAL;
 }
+
+int set_pages_array_uc(struct page **pages, int addrinarray)
+{
+	return _set_pages_array(pages, addrinarray, _PAGE_CACHE_UC_MINUS);
+}
 EXPORT_SYMBOL(set_pages_array_uc);
 
+int set_pages_array_wc(struct page **pages, int addrinarray)
+{
+	return _set_pages_array(pages, addrinarray, _PAGE_CACHE_WC);
+}
+EXPORT_SYMBOL(set_pages_array_wc);
+
 int set_pages_wb(struct page *page, int numpages)
 {
 	unsigned long addr = (unsigned long)page_address(page);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index ae9648e..64121a1 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,7 +12,7 @@
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/rbtree.h>
@@ -30,6 +30,8 @@
 #include <asm/pat.h>
 #include <asm/io.h>
 
+#include "pat_internal.h"
+
 #ifdef CONFIG_X86_PAT
 int __read_mostly pat_enabled = 1;
 
@@ -53,19 +55,15 @@ static inline void pat_disable(const char *reason)
 #endif
 
 
-static int debug_enable;
+int pat_debug_enable;
 
 static int __init pat_debug_setup(char *str)
 {
-	debug_enable = 1;
+	pat_debug_enable = 1;
 	return 0;
 }
 __setup("debugpat", pat_debug_setup);
 
-#define dprintk(fmt, arg...) \
-	do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0)
-
-
 static u64 __read_mostly boot_pat_state;
 
 enum {
@@ -132,84 +130,7 @@ void pat_init(void)
 
 #undef PAT
 
-static char *cattr_name(unsigned long flags)
-{
-	switch (flags & _PAGE_CACHE_MASK) {
-	case _PAGE_CACHE_UC:		return "uncached";
-	case _PAGE_CACHE_UC_MINUS:	return "uncached-minus";
-	case _PAGE_CACHE_WB:		return "write-back";
-	case _PAGE_CACHE_WC:		return "write-combining";
-	default:			return "broken";
-	}
-}
-
-/*
- * The global memtype list keeps track of memory type for specific
- * physical memory areas. Conflicting memory types in different
- * mappings can cause CPU cache corruption. To avoid this we keep track.
- *
- * The list is sorted based on starting address and can contain multiple
- * entries for each address (this allows reference counting for overlapping
- * areas). All the aliases have the same cache attributes of course.
- * Zero attributes are represented as holes.
- *
- * The data structure is a list that is also organized as an rbtree
- * sorted on the start address of memtype range.
- *
- * memtype_lock protects both the linear list and rbtree.
- */
-
-struct memtype {
-	u64			start;
-	u64			end;
-	unsigned long		type;
-	struct list_head	nd;
-	struct rb_node		rb;
-};
-
-static struct rb_root memtype_rbroot = RB_ROOT;
-static LIST_HEAD(memtype_list);
-static DEFINE_SPINLOCK(memtype_lock);	/* protects memtype list */
-
-static struct memtype *memtype_rb_search(struct rb_root *root, u64 start)
-{
-	struct rb_node *node = root->rb_node;
-	struct memtype *last_lower = NULL;
-
-	while (node) {
-		struct memtype *data = container_of(node, struct memtype, rb);
-
-		if (data->start < start) {
-			last_lower = data;
-			node = node->rb_right;
-		} else if (data->start > start) {
-			node = node->rb_left;
-		} else
-			return data;
-	}
-
-	/* Will return NULL if there is no entry with its start <= start */
-	return last_lower;
-}
-
-static void memtype_rb_insert(struct rb_root *root, struct memtype *data)
-{
-	struct rb_node **new = &(root->rb_node);
-	struct rb_node *parent = NULL;
-
-	while (*new) {
-		struct memtype *this = container_of(*new, struct memtype, rb);
-
-		parent = *new;
-		if (data->start <= this->start)
-			new = &((*new)->rb_left);
-		else if (data->start > this->start)
-			new = &((*new)->rb_right);
-	}
-
-	rb_link_node(&data->rb, parent, new);
-	rb_insert_color(&data->rb, root);
-}
+static DEFINE_SPINLOCK(memtype_lock);	/* protects memtype accesses */
 
 /*
  * Does intersection of PAT memory type and MTRR memory type and returns
@@ -237,33 +158,6 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 	return req_type;
 }
 
-static int
-chk_conflict(struct memtype *new, struct memtype *entry, unsigned long *type)
-{
-	if (new->type != entry->type) {
-		if (type) {
-			new->type = entry->type;
-			*type = entry->type;
-		} else
-			goto conflict;
-	}
-
-	 /* check overlaps with more than one entry in the list */
-	list_for_each_entry_continue(entry, &memtype_list, nd) {
-		if (new->end <= entry->start)
-			break;
-		else if (new->type != entry->type)
-			goto conflict;
-	}
-	return 0;
-
- conflict:
-	printk(KERN_INFO "%s:%d conflicting memory types "
-	       "%Lx-%Lx %s<->%s\n", current->comm, current->pid, new->start,
-	       new->end, cattr_name(new->type), cattr_name(entry->type));
-	return -EBUSY;
-}
-
 static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
 {
 	int ram_page = 0, not_rampage = 0;
@@ -296,8 +190,6 @@ static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
  * Here we do two pass:
  * - Find the memtype of all the pages in the range, look for any conflicts
  * - In case of no conflicts, set the new memtype for pages in the range
- *
- * Caller must hold memtype_lock for atomicity.
  */
 static int reserve_ram_pages_type(u64 start, u64 end, unsigned long req_type,
 				  unsigned long *new_type)
@@ -364,9 +256,8 @@ static int free_ram_pages_type(u64 start, u64 end)
 int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		    unsigned long *new_type)
 {
-	struct memtype *new, *entry;
+	struct memtype *new;
 	unsigned long actual_type;
-	struct list_head *where;
 	int is_range_ram;
 	int err = 0;
 
@@ -404,16 +295,14 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 	is_range_ram = pat_pagerange_is_ram(start, end);
 	if (is_range_ram == 1) {
 
-		spin_lock(&memtype_lock);
 		err = reserve_ram_pages_type(start, end, req_type, new_type);
-		spin_unlock(&memtype_lock);
 
 		return err;
 	} else if (is_range_ram < 0) {
 		return -EINVAL;
 	}
 
-	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	new  = kzalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
 		return -ENOMEM;
 
@@ -423,42 +312,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
-	/* Search for existing mapping that overlaps the current range */
-	where = NULL;
-	list_for_each_entry(entry, &memtype_list, nd) {
-		if (end <= entry->start) {
-			where = entry->nd.prev;
-			break;
-		} else if (start <= entry->start) { /* end > entry->start */
-			err = chk_conflict(new, entry, new_type);
-			if (!err) {
-				dprintk("Overlap at 0x%Lx-0x%Lx\n",
-					entry->start, entry->end);
-				where = entry->nd.prev;
-			}
-			break;
-		} else if (start < entry->end) { /* start > entry->start */
-			err = chk_conflict(new, entry, new_type);
-			if (!err) {
-				dprintk("Overlap at 0x%Lx-0x%Lx\n",
-					entry->start, entry->end);
-
-				/*
-				 * Move to right position in the linked
-				 * list to add this new entry
-				 */
-				list_for_each_entry_continue(entry,
-							&memtype_list, nd) {
-					if (start <= entry->start) {
-						where = entry->nd.prev;
-						break;
-					}
-				}
-			}
-			break;
-		}
-	}
-
+	err = rbt_memtype_check_insert(new, new_type);
 	if (err) {
 		printk(KERN_INFO "reserve_memtype failed 0x%Lx-0x%Lx, "
 		       "track %s, req %s\n",
@@ -469,13 +323,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
-	if (where)
-		list_add(&new->nd, where);
-	else
-		list_add_tail(&new->nd, &memtype_list);
-
-	memtype_rb_insert(&memtype_rbroot, new);
-
 	spin_unlock(&memtype_lock);
 
 	dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
@@ -487,9 +334,9 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 int free_memtype(u64 start, u64 end)
 {
-	struct memtype *entry, *saved_entry;
 	int err = -EINVAL;
 	int is_range_ram;
+	struct memtype *entry;
 
 	if (!pat_enabled)
 		return 0;
@@ -501,9 +348,7 @@ int free_memtype(u64 start, u64 end)
 	is_range_ram = pat_pagerange_is_ram(start, end);
 	if (is_range_ram == 1) {
 
-		spin_lock(&memtype_lock);
 		err = free_ram_pages_type(start, end);
-		spin_unlock(&memtype_lock);
 
 		return err;
 	} else if (is_range_ram < 0) {
@@ -511,56 +356,20 @@ int free_memtype(u64 start, u64 end)
 	}
 
 	spin_lock(&memtype_lock);
-
-	entry = memtype_rb_search(&memtype_rbroot, start);
-	if (unlikely(entry == NULL))
-		goto unlock_ret;
-
-	/*
-	 * Saved entry points to an entry with start same or less than what
-	 * we searched for. Now go through the list in both directions to look
-	 * for the entry that matches with both start and end, with list stored
-	 * in sorted start address
-	 */
-	saved_entry = entry;
-	list_for_each_entry_from(entry, &memtype_list, nd) {
-		if (entry->start == start && entry->end == end) {
-			rb_erase(&entry->rb, &memtype_rbroot);
-			list_del(&entry->nd);
-			kfree(entry);
-			err = 0;
-			break;
-		} else if (entry->start > start) {
-			break;
-		}
-	}
-
-	if (!err)
-		goto unlock_ret;
-
-	entry = saved_entry;
-	list_for_each_entry_reverse(entry, &memtype_list, nd) {
-		if (entry->start == start && entry->end == end) {
-			rb_erase(&entry->rb, &memtype_rbroot);
-			list_del(&entry->nd);
-			kfree(entry);
-			err = 0;
-			break;
-		} else if (entry->start < start) {
-			break;
-		}
-	}
-unlock_ret:
+	entry = rbt_memtype_erase(start, end);
 	spin_unlock(&memtype_lock);
 
-	if (err) {
+	if (!entry) {
 		printk(KERN_INFO "%s:%d freeing invalid memtype %Lx-%Lx\n",
 			current->comm, current->pid, start, end);
+		return -EINVAL;
 	}
 
+	kfree(entry);
+
 	dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end);
 
-	return err;
+	return 0;
 }
 
 
@@ -583,10 +392,8 @@ static unsigned long lookup_memtype(u64 paddr)
 
 	if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
 		struct page *page;
-		spin_lock(&memtype_lock);
 		page = pfn_to_page(paddr >> PAGE_SHIFT);
 		rettype = get_page_memtype(page);
-		spin_unlock(&memtype_lock);
 		/*
 		 * -1 from get_page_memtype() implies RAM page is in its
 		 * default state and not reserved, and hence of type WB
@@ -599,7 +406,7 @@ static unsigned long lookup_memtype(u64 paddr)
 
 	spin_lock(&memtype_lock);
 
-	entry = memtype_rb_search(&memtype_rbroot, paddr);
+	entry = rbt_memtype_lookup(paddr);
 	if (entry != NULL)
 		rettype = entry->type;
 	else
@@ -936,29 +743,25 @@ EXPORT_SYMBOL_GPL(pgprot_writecombine);
 
 #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
 
-/* get Nth element of the linked list */
 static struct memtype *memtype_get_idx(loff_t pos)
 {
-	struct memtype *list_node, *print_entry;
-	int i = 1;
+	struct memtype *print_entry;
+	int ret;
 
-	print_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	print_entry  = kzalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!print_entry)
 		return NULL;
 
 	spin_lock(&memtype_lock);
-	list_for_each_entry(list_node, &memtype_list, nd) {
-		if (pos == i) {
-			*print_entry = *list_node;
-			spin_unlock(&memtype_lock);
-			return print_entry;
-		}
-		++i;
-	}
+	ret = rbt_memtype_copy_nth_element(print_entry, pos);
 	spin_unlock(&memtype_lock);
-	kfree(print_entry);
 
-	return NULL;
+	if (!ret) {
+		return print_entry;
+	} else {
+		kfree(print_entry);
+		return NULL;
+	}
 }
 
 static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
diff --git a/arch/x86/mm/pat_internal.h b/arch/x86/mm/pat_internal.h
new file mode 100644
index 0000000..77e5ba1
--- /dev/null
+++ b/arch/x86/mm/pat_internal.h
@@ -0,0 +1,46 @@
+#ifndef __PAT_INTERNAL_H_
+#define __PAT_INTERNAL_H_
+
+extern int pat_debug_enable;
+
+#define dprintk(fmt, arg...) \
+	do { if (pat_debug_enable) printk(KERN_INFO fmt, ##arg); } while (0)
+
+struct memtype {
+	u64			start;
+	u64			end;
+	u64			subtree_max_end;
+	unsigned long		type;
+	struct rb_node		rb;
+};
+
+static inline char *cattr_name(unsigned long flags)
+{
+	switch (flags & _PAGE_CACHE_MASK) {
+	case _PAGE_CACHE_UC:		return "uncached";
+	case _PAGE_CACHE_UC_MINUS:	return "uncached-minus";
+	case _PAGE_CACHE_WB:		return "write-back";
+	case _PAGE_CACHE_WC:		return "write-combining";
+	default:			return "broken";
+	}
+}
+
+#ifdef CONFIG_X86_PAT
+extern int rbt_memtype_check_insert(struct memtype *new,
+					unsigned long *new_type);
+extern struct memtype *rbt_memtype_erase(u64 start, u64 end);
+extern struct memtype *rbt_memtype_lookup(u64 addr);
+extern int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos);
+#else
+static inline int rbt_memtype_check_insert(struct memtype *new,
+					unsigned long *new_type)
+{ return 0; }
+static inline struct memtype *rbt_memtype_erase(u64 start, u64 end)
+{ return NULL; }
+static inline struct memtype *rbt_memtype_lookup(u64 addr)
+{ return NULL; }
+static inline int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos)
+{ return 0; }
+#endif
+
+#endif /* __PAT_INTERNAL_H_ */
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
new file mode 100644
index 0000000..8acaddd
--- /dev/null
+++ b/arch/x86/mm/pat_rbtree.c
@@ -0,0 +1,253 @@
+/*
+ * Handle caching attributes in page tables (PAT)
+ *
+ * Authors: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *          Suresh B Siddha <suresh.b.siddha@intel.com>
+ *
+ * Interval tree (augmented rbtree) used to store the PAT memory type
+ * reservations.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/gfp.h>
+
+#include <asm/pgtable.h>
+#include <asm/pat.h>
+
+#include "pat_internal.h"
+
+/*
+ * The memtype tree keeps track of memory type for specific
+ * physical memory areas. Without proper tracking, conflicting memory
+ * types in different mappings can cause CPU cache corruption.
+ *
+ * The tree is an interval tree (augmented rbtree) with tree ordered
+ * on starting address. Tree can contain multiple entries for
+ * different regions which overlap. All the aliases have the same
+ * cache attributes of course.
+ *
+ * memtype_lock protects the rbtree.
+ */
+
+static struct rb_root memtype_rbroot = RB_ROOT;
+
+static int is_node_overlap(struct memtype *node, u64 start, u64 end)
+{
+	if (node->start >= end || node->end <= start)
+		return 0;
+
+	return 1;
+}
+
+static u64 get_subtree_max_end(struct rb_node *node)
+{
+	u64 ret = 0;
+	if (node) {
+		struct memtype *data = container_of(node, struct memtype, rb);
+		ret = data->subtree_max_end;
+	}
+	return ret;
+}
+
+/* Update 'subtree_max_end' for a node, based on node and its children */
+static void memtype_rb_augment_cb(struct rb_node *node, void *__unused)
+{
+	struct memtype *data;
+	u64 max_end, child_max_end;
+
+	if (!node)
+		return;
+
+	data = container_of(node, struct memtype, rb);
+	max_end = data->end;
+
+	child_max_end = get_subtree_max_end(node->rb_right);
+	if (child_max_end > max_end)
+		max_end = child_max_end;
+
+	child_max_end = get_subtree_max_end(node->rb_left);
+	if (child_max_end > max_end)
+		max_end = child_max_end;
+
+	data->subtree_max_end = max_end;
+}
+
+/* Find the first (lowest start addr) overlapping range from rb tree */
+static struct memtype *memtype_rb_lowest_match(struct rb_root *root,
+				u64 start, u64 end)
+{
+	struct rb_node *node = root->rb_node;
+	struct memtype *last_lower = NULL;
+
+	while (node) {
+		struct memtype *data = container_of(node, struct memtype, rb);
+
+		if (get_subtree_max_end(node->rb_left) > start) {
+			/* Lowest overlap if any must be on left side */
+			node = node->rb_left;
+		} else if (is_node_overlap(data, start, end)) {
+			last_lower = data;
+			break;
+		} else if (start >= data->start) {
+			/* Lowest overlap if any must be on right side */
+			node = node->rb_right;
+		} else {
+			break;
+		}
+	}
+	return last_lower; /* Returns NULL if there is no overlap */
+}
+
+static struct memtype *memtype_rb_exact_match(struct rb_root *root,
+				u64 start, u64 end)
+{
+	struct memtype *match;
+
+	match = memtype_rb_lowest_match(root, start, end);
+	while (match != NULL && match->start < end) {
+		struct rb_node *node;
+
+		if (match->start == start && match->end == end)
+			return match;
+
+		node = rb_next(&match->rb);
+		if (node)
+			match = container_of(node, struct memtype, rb);
+		else
+			match = NULL;
+	}
+
+	return NULL; /* Returns NULL if there is no exact match */
+}
+
+static int memtype_rb_check_conflict(struct rb_root *root,
+				u64 start, u64 end,
+				unsigned long reqtype, unsigned long *newtype)
+{
+	struct rb_node *node;
+	struct memtype *match;
+	int found_type = reqtype;
+
+	match = memtype_rb_lowest_match(&memtype_rbroot, start, end);
+	if (match == NULL)
+		goto success;
+
+	if (match->type != found_type && newtype == NULL)
+		goto failure;
+
+	dprintk("Overlap at 0x%Lx-0x%Lx\n", match->start, match->end);
+	found_type = match->type;
+
+	node = rb_next(&match->rb);
+	while (node) {
+		match = container_of(node, struct memtype, rb);
+
+		if (match->start >= end) /* Checked all possible matches */
+			goto success;
+
+		if (is_node_overlap(match, start, end) &&
+		    match->type != found_type) {
+			goto failure;
+		}
+
+		node = rb_next(&match->rb);
+	}
+success:
+	if (newtype)
+		*newtype = found_type;
+
+	return 0;
+
+failure:
+	printk(KERN_INFO "%s:%d conflicting memory types "
+		"%Lx-%Lx %s<->%s\n", current->comm, current->pid, start,
+		end, cattr_name(found_type), cattr_name(match->type));
+	return -EBUSY;
+}
+
+static void memtype_rb_insert(struct rb_root *root, struct memtype *newdata)
+{
+	struct rb_node **node = &(root->rb_node);
+	struct rb_node *parent = NULL;
+
+	while (*node) {
+		struct memtype *data = container_of(*node, struct memtype, rb);
+
+		parent = *node;
+		if (newdata->start <= data->start)
+			node = &((*node)->rb_left);
+		else if (newdata->start > data->start)
+			node = &((*node)->rb_right);
+	}
+
+	rb_link_node(&newdata->rb, parent, node);
+	rb_insert_color(&newdata->rb, root);
+	rb_augment_insert(&newdata->rb, memtype_rb_augment_cb, NULL);
+}
+
+int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type)
+{
+	int err = 0;
+
+	err = memtype_rb_check_conflict(&memtype_rbroot, new->start, new->end,
+						new->type, ret_type);
+
+	if (!err) {
+		if (ret_type)
+			new->type = *ret_type;
+
+		new->subtree_max_end = new->end;
+		memtype_rb_insert(&memtype_rbroot, new);
+	}
+	return err;
+}
+
+struct memtype *rbt_memtype_erase(u64 start, u64 end)
+{
+	struct rb_node *deepest;
+	struct memtype *data;
+
+	data = memtype_rb_exact_match(&memtype_rbroot, start, end);
+	if (!data)
+		goto out;
+
+	deepest = rb_augment_erase_begin(&data->rb);
+	rb_erase(&data->rb, &memtype_rbroot);
+	rb_augment_erase_end(deepest, memtype_rb_augment_cb, NULL);
+out:
+	return data;
+}
+
+struct memtype *rbt_memtype_lookup(u64 addr)
+{
+	struct memtype *data;
+	data = memtype_rb_lowest_match(&memtype_rbroot, addr, addr + PAGE_SIZE);
+	return data;
+}
+
+#if defined(CONFIG_DEBUG_FS)
+int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos)
+{
+	struct rb_node *node;
+	int i = 1;
+
+	node = rb_first(&memtype_rbroot);
+	while (node && pos != i) {
+		node = rb_next(node);
+		i++;
+	}
+
+	if (node) { /* pos == i */
+		struct memtype *this = container_of(node, struct memtype, rb);
+		*out = *this;
+		return 0;
+	} else {
+		return 1;
+	}
+}
+#endif
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
index df3d5c8..308e325 100644
--- a/arch/x86/mm/pf_in.c
+++ b/arch/x86/mm/pf_in.c
@@ -34,7 +34,7 @@
 /* IA32 Manual 3, 2-1 */
 static unsigned char prefix_codes[] = {
 	0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64,
-	0x65, 0x2E, 0x3E, 0x66, 0x67
+	0x65, 0x66, 0x67
 };
 /* IA32 Manual 3, 3-432*/
 static unsigned int reg_rop[] = {
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index ed34f5e..5c4ee42 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -1,4 +1,5 @@
 #include <linux/mm.h>
+#include <linux/gfp.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/tlb.h>
@@ -6,6 +7,14 @@
 
 #define PGALLOC_GFP GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO
 
+#ifdef CONFIG_HIGHPTE
+#define PGALLOC_USER_GFP __GFP_HIGHMEM
+#else
+#define PGALLOC_USER_GFP 0
+#endif
+
+gfp_t __userpte_alloc_gfp = PGALLOC_GFP | PGALLOC_USER_GFP;
+
 pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
 {
 	return (pte_t *)__get_free_page(PGALLOC_GFP);
@@ -15,16 +24,29 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	struct page *pte;
 
-#ifdef CONFIG_HIGHPTE
-	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
-#else
-	pte = alloc_pages(PGALLOC_GFP, 0);
-#endif
+	pte = alloc_pages(__userpte_alloc_gfp, 0);
 	if (pte)
 		pgtable_page_ctor(pte);
 	return pte;
 }
 
+static int __init setup_userpte(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	/*
+	 * "userpte=nohigh" disables allocation of user pagetables in
+	 * high memory.
+	 */
+	if (strcmp(arg, "nohigh") == 0)
+		__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+	else
+		return -EINVAL;
+	return 0;
+}
+early_param("userpte", setup_userpte);
+
 void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 46c8834..cac7184 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -6,11 +6,9 @@
 #include <linux/swap.h>
 #include <linux/smp.h>
 #include <linux/highmem.h>
-#include <linux/slab.h>
 #include <linux/pagemap.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
-#include <linux/quicklist.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -19,6 +17,7 @@
 #include <asm/e820.h>
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
+#include <asm/io.h>
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
@@ -129,6 +128,7 @@ static int __init parse_reservetop(char *arg)
 
 	address = memparse(arg, &arg);
 	reserve_top_address(address);
+	fixup_early_ioremap();
 	return 0;
 }
 early_param("reservetop", parse_reservetop);
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 28c6876..f9897f7 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -363,6 +363,54 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 	for (i = 0; i < MAX_NUMNODES; i++)
 		cutoff_node(i, start, end);
 
+	/*
+	 * Join together blocks on the same node, holes between
+	 * which don't overlap with memory on other nodes.
+	 */
+	for (i = 0; i < num_node_memblks; ++i) {
+		int j, k;
+
+		for (j = i + 1; j < num_node_memblks; ++j) {
+			unsigned long start, end;
+
+			if (memblk_nodeid[i] != memblk_nodeid[j])
+				continue;
+			start = min(node_memblk_range[i].end,
+			            node_memblk_range[j].end);
+			end = max(node_memblk_range[i].start,
+			          node_memblk_range[j].start);
+			for (k = 0; k < num_node_memblks; ++k) {
+				if (memblk_nodeid[i] == memblk_nodeid[k])
+					continue;
+				if (start < node_memblk_range[k].end &&
+				    end > node_memblk_range[k].start)
+					break;
+			}
+			if (k < num_node_memblks)
+				continue;
+			start = min(node_memblk_range[i].start,
+			            node_memblk_range[j].start);
+			end = max(node_memblk_range[i].end,
+			          node_memblk_range[j].end);
+			printk(KERN_INFO "SRAT: Node %d "
+			       "[%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n",
+			       memblk_nodeid[i],
+			       node_memblk_range[i].start,
+			       node_memblk_range[i].end,
+			       node_memblk_range[j].start,
+			       node_memblk_range[j].end,
+			       start, end);
+			node_memblk_range[i].start = start;
+			node_memblk_range[i].end = end;
+			k = --num_node_memblks - j;
+			memmove(memblk_nodeid + j, memblk_nodeid + j+1,
+				k * sizeof(*memblk_nodeid));
+			memmove(node_memblk_range + j, node_memblk_range + j+1,
+				k * sizeof(*node_memblk_range));
+			--j;
+		}
+	}
+
 	memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks,
 					   memblk_nodeid);
 	if (memnode_shift < 0) {
@@ -461,7 +509,8 @@ void __init acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes)
 		 * node, it must now point to the fake node ID.
 		 */
 		for (j = 0; j < MAX_LOCAL_APIC; j++)
-			if (apicid_to_node[j] == nid)
+			if (apicid_to_node[j] == nid &&
+			    fake_apicid_to_node[j] == NUMA_NO_NODE)
 				fake_apicid_to_node[j] = i;
 	}
 	for (i = 0; i < num_nodes; i++)
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 65b58e4..426f3a1 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -41,7 +41,7 @@ union smp_flush_state {
 	struct {
 		struct mm_struct *flush_mm;
 		unsigned long flush_va;
-		spinlock_t tlbstate_lock;
+		raw_spinlock_t tlbstate_lock;
 		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
 	};
 	char pad[INTERNODE_CACHE_BYTES];
@@ -181,7 +181,7 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 	 * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
 	 * probably not worth checking this for a cache-hot lock.
 	 */
-	spin_lock(&f->tlbstate_lock);
+	raw_spin_lock(&f->tlbstate_lock);
 
 	f->flush_mm = mm;
 	f->flush_va = va;
@@ -199,7 +199,7 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 
 	f->flush_mm = NULL;
 	f->flush_va = 0;
-	spin_unlock(&f->tlbstate_lock);
+	raw_spin_unlock(&f->tlbstate_lock);
 }
 
 void native_flush_tlb_others(const struct cpumask *cpumask,
@@ -223,7 +223,7 @@ static int __cpuinit init_smp_flush(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(flush_state); i++)
-		spin_lock_init(&flush_state[i].tlbstate_lock);
+		raw_spin_lock_init(&flush_state[i].tlbstate_lock);
 
 	return 0;
 }
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index cb88b1a..b28d2f1 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -31,8 +31,9 @@ static struct op_x86_model_spec *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
-/* 0 == registered but off, 1 == registered and on */
-static int nmi_enabled = 0;
+/* must be protected with get_online_cpus()/put_online_cpus(): */
+static int nmi_enabled;
+static int ctr_running;
 
 struct op_counter_config counter_config[OP_MAX_COUNTER];
 
@@ -61,12 +62,16 @@ static int profile_exceptions_notify(struct notifier_block *self,
 {
 	struct die_args *args = (struct die_args *)data;
 	int ret = NOTIFY_DONE;
-	int cpu = smp_processor_id();
 
 	switch (val) {
 	case DIE_NMI:
 	case DIE_NMI_IPI:
-		model->check_ctrs(args->regs, &per_cpu(cpu_msrs, cpu));
+		if (ctr_running)
+			model->check_ctrs(args->regs, &__get_cpu_var(cpu_msrs));
+		else if (!nmi_enabled)
+			break;
+		else
+			model->stop(&__get_cpu_var(cpu_msrs));
 		ret = NOTIFY_STOP;
 		break;
 	default:
@@ -95,24 +100,36 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 static void nmi_cpu_start(void *dummy)
 {
 	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->start(msrs);
+	if (!msrs->controls)
+		WARN_ON_ONCE(1);
+	else
+		model->start(msrs);
 }
 
 static int nmi_start(void)
 {
+	get_online_cpus();
 	on_each_cpu(nmi_cpu_start, NULL, 1);
+	ctr_running = 1;
+	put_online_cpus();
 	return 0;
 }
 
 static void nmi_cpu_stop(void *dummy)
 {
 	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->stop(msrs);
+	if (!msrs->controls)
+		WARN_ON_ONCE(1);
+	else
+		model->stop(msrs);
 }
 
 static void nmi_stop(void)
 {
+	get_online_cpus();
 	on_each_cpu(nmi_cpu_stop, NULL, 1);
+	ctr_running = 0;
+	put_online_cpus();
 }
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
@@ -159,7 +176,7 @@ static int nmi_setup_mux(void)
 
 	for_each_possible_cpu(i) {
 		per_cpu(cpu_msrs, i).multiplex =
-			kmalloc(multiplex_size, GFP_KERNEL);
+			kzalloc(multiplex_size, GFP_KERNEL);
 		if (!per_cpu(cpu_msrs, i).multiplex)
 			return 0;
 	}
@@ -179,7 +196,6 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 		if (counter_config[i].enabled) {
 			multiplex[i].saved = -(u64)counter_config[i].count;
 		} else {
-			multiplex[i].addr  = 0;
 			multiplex[i].saved = 0;
 		}
 	}
@@ -189,25 +205,27 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 
 static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
 {
+	struct op_msr *counters = msrs->counters;
 	struct op_msr *multiplex = msrs->multiplex;
 	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
 		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
+		if (counters[i].addr)
+			rdmsrl(counters[i].addr, multiplex[virt].saved);
 	}
 }
 
 static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
 {
+	struct op_msr *counters = msrs->counters;
 	struct op_msr *multiplex = msrs->multiplex;
 	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
 		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
+		if (counters[i].addr)
+			wrmsrl(counters[i].addr, multiplex[virt].saved);
 	}
 }
 
@@ -222,7 +240,7 @@ static void nmi_cpu_switch(void *dummy)
 
 	/* move to next set */
 	si += model->num_counters;
-	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+	if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
 		per_cpu(switch_index, cpu) = 0;
 	else
 		per_cpu(switch_index, cpu) = si;
@@ -251,7 +269,10 @@ static int nmi_switch_event(void)
 	if (nmi_multiplex_on() < 0)
 		return -EINVAL;		/* not necessary */
 
-	on_each_cpu(nmi_cpu_switch, NULL, 1);
+	get_online_cpus();
+	if (ctr_running)
+		on_each_cpu(nmi_cpu_switch, NULL, 1);
+	put_online_cpus();
 
 	return 0;
 }
@@ -294,6 +315,7 @@ static void free_msrs(void)
 		kfree(per_cpu(cpu_msrs, i).controls);
 		per_cpu(cpu_msrs, i).controls = NULL;
 	}
+	nmi_shutdown_mux();
 }
 
 static int allocate_msrs(void)
@@ -303,17 +325,24 @@ static int allocate_msrs(void)
 
 	int i;
 	for_each_possible_cpu(i) {
-		per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
+		per_cpu(cpu_msrs, i).counters = kzalloc(counters_size,
 							GFP_KERNEL);
 		if (!per_cpu(cpu_msrs, i).counters)
-			return 0;
-		per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
+			goto fail;
+		per_cpu(cpu_msrs, i).controls = kzalloc(controls_size,
 							GFP_KERNEL);
 		if (!per_cpu(cpu_msrs, i).controls)
-			return 0;
+			goto fail;
 	}
 
+	if (!nmi_setup_mux())
+		goto fail;
+
 	return 1;
+
+fail:
+	free_msrs();
+	return 0;
 }
 
 static void nmi_cpu_setup(void *dummy)
@@ -335,49 +364,6 @@ static struct notifier_block profile_exceptions_nb = {
 	.priority = 2
 };
 
-static int nmi_setup(void)
-{
-	int err = 0;
-	int cpu;
-
-	if (!allocate_msrs())
-		err = -ENOMEM;
-	else if (!nmi_setup_mux())
-		err = -ENOMEM;
-	else
-		err = register_die_notifier(&profile_exceptions_nb);
-
-	if (err) {
-		free_msrs();
-		nmi_shutdown_mux();
-		return err;
-	}
-
-	/* We need to serialize save and setup for HT because the subset
-	 * of msrs are distinct for save and setup operations
-	 */
-
-	/* Assume saved/restored counters are the same on all CPUs */
-	model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
-	for_each_possible_cpu(cpu) {
-		if (!cpu)
-			continue;
-
-		memcpy(per_cpu(cpu_msrs, cpu).counters,
-		       per_cpu(cpu_msrs, 0).counters,
-		       sizeof(struct op_msr) * model->num_counters);
-
-		memcpy(per_cpu(cpu_msrs, cpu).controls,
-		       per_cpu(cpu_msrs, 0).controls,
-		       sizeof(struct op_msr) * model->num_controls);
-
-		mux_clone(cpu);
-	}
-	on_each_cpu(nmi_cpu_setup, NULL, 1);
-	nmi_enabled = 1;
-	return 0;
-}
-
 static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
@@ -411,20 +397,24 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
+	if (model->cpu_down)
+		model->cpu_down();
 }
 
-static void nmi_shutdown(void)
+static void nmi_cpu_up(void *dummy)
 {
-	struct op_msrs *msrs;
+	if (nmi_enabled)
+		nmi_cpu_setup(dummy);
+	if (ctr_running)
+		nmi_cpu_start(dummy);
+}
 
-	nmi_enabled = 0;
-	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
-	unregister_die_notifier(&profile_exceptions_nb);
-	nmi_shutdown_mux();
-	msrs = &get_cpu_var(cpu_msrs);
-	model->shutdown(msrs);
-	free_msrs();
-	put_cpu_var(cpu_msrs);
+static void nmi_cpu_down(void *dummy)
+{
+	if (ctr_running)
+		nmi_cpu_stop(dummy);
+	if (nmi_enabled)
+		nmi_cpu_shutdown(dummy);
 }
 
 static int nmi_create_files(struct super_block *sb, struct dentry *root)
@@ -456,7 +446,6 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
-#ifdef CONFIG_SMP
 static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
 {
@@ -464,10 +453,10 @@ static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 	switch (action) {
 	case CPU_DOWN_FAILED:
 	case CPU_ONLINE:
-		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		smp_call_function_single(cpu, nmi_cpu_up, NULL, 0);
 		break;
 	case CPU_DOWN_PREPARE:
-		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		smp_call_function_single(cpu, nmi_cpu_down, NULL, 1);
 		break;
 	}
 	return NOTIFY_DONE;
@@ -476,7 +465,75 @@ static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 static struct notifier_block oprofile_cpu_nb = {
 	.notifier_call = oprofile_cpu_notifier
 };
-#endif
+
+static int nmi_setup(void)
+{
+	int err = 0;
+	int cpu;
+
+	if (!allocate_msrs())
+		return -ENOMEM;
+
+	/* We need to serialize save and setup for HT because the subset
+	 * of msrs are distinct for save and setup operations
+	 */
+
+	/* Assume saved/restored counters are the same on all CPUs */
+	err = model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
+	if (err)
+		goto fail;
+
+	for_each_possible_cpu(cpu) {
+		if (!cpu)
+			continue;
+
+		memcpy(per_cpu(cpu_msrs, cpu).counters,
+		       per_cpu(cpu_msrs, 0).counters,
+		       sizeof(struct op_msr) * model->num_counters);
+
+		memcpy(per_cpu(cpu_msrs, cpu).controls,
+		       per_cpu(cpu_msrs, 0).controls,
+		       sizeof(struct op_msr) * model->num_controls);
+
+		mux_clone(cpu);
+	}
+
+	nmi_enabled = 0;
+	ctr_running = 0;
+	barrier();
+	err = register_die_notifier(&profile_exceptions_nb);
+	if (err)
+		goto fail;
+
+	get_online_cpus();
+	register_cpu_notifier(&oprofile_cpu_nb);
+	on_each_cpu(nmi_cpu_setup, NULL, 1);
+	nmi_enabled = 1;
+	put_online_cpus();
+
+	return 0;
+fail:
+	free_msrs();
+	return err;
+}
+
+static void nmi_shutdown(void)
+{
+	struct op_msrs *msrs;
+
+	get_online_cpus();
+	unregister_cpu_notifier(&oprofile_cpu_nb);
+	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
+	nmi_enabled = 0;
+	ctr_running = 0;
+	put_online_cpus();
+	barrier();
+	unregister_die_notifier(&profile_exceptions_nb);
+	msrs = &get_cpu_var(cpu_msrs);
+	model->shutdown(msrs);
+	free_msrs();
+	put_cpu_var(cpu_msrs);
+}
 
 #ifdef CONFIG_PM
 
@@ -598,6 +655,7 @@ static int __init ppro_init(char **cpu_type)
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
+	case 0x2e:
 	case 26:
 		spec = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
@@ -685,9 +743,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		return -ENODEV;
 	}
 
-#ifdef CONFIG_SMP
-	register_cpu_notifier(&oprofile_cpu_nb);
-#endif
 	/* default values, can be overwritten by model */
 	ops->create_files	= nmi_create_files;
 	ops->setup		= nmi_setup;
@@ -714,12 +769,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 void op_nmi_exit(void)
 {
-	if (using_nmi) {
+	if (using_nmi)
 		exit_sysfs();
-#ifdef CONFIG_SMP
-		unregister_cpu_notifier(&oprofile_cpu_nb);
-#endif
-	}
-	if (model->exit)
-		model->exit();
 }
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 39686c2..b67a6b5 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -22,18 +22,18 @@
 #include <asm/ptrace.h>
 #include <asm/msr.h>
 #include <asm/nmi.h>
+#include <asm/apic.h>
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
 
 #define NUM_COUNTERS 4
-#define NUM_CONTROLS 4
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 #define NUM_VIRT_COUNTERS 32
-#define NUM_VIRT_CONTROLS 32
 #else
 #define NUM_VIRT_COUNTERS NUM_COUNTERS
-#define NUM_VIRT_CONTROLS NUM_CONTROLS
 #endif
 
 #define OP_EVENT_MASK			0x0FFF
@@ -43,23 +43,10 @@
 
 static unsigned long reset_value[NUM_VIRT_COUNTERS];
 
-#ifdef CONFIG_OPROFILE_IBS
-
-/* IbsFetchCtl bits/masks */
-#define IBS_FETCH_RAND_EN		(1ULL<<57)
-#define IBS_FETCH_VAL			(1ULL<<49)
-#define IBS_FETCH_ENABLE		(1ULL<<48)
-#define IBS_FETCH_CNT_MASK		0xFFFF0000ULL
-
-/*IbsOpCtl bits */
-#define IBS_OP_CNT_CTL			(1ULL<<19)
-#define IBS_OP_VAL			(1ULL<<18)
-#define IBS_OP_ENABLE			(1ULL<<17)
-
 #define IBS_FETCH_SIZE			6
 #define IBS_OP_SIZE			12
 
-static int has_ibs;	/* AMD Family10h and later */
+static u32 ibs_caps;
 
 struct op_ibs_config {
 	unsigned long op_enabled;
@@ -71,122 +58,105 @@ struct op_ibs_config {
 };
 
 static struct op_ibs_config ibs_config;
+static u64 ibs_op_ctl;
 
-#endif
+/*
+ * IBS cpuid feature detection
+ */
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+#define IBS_CPUID_FEATURES      0x8000001b
 
-static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
-{
-	int i;
+/*
+ * Same bit mask as for IBS cpuid feature flags (Fn8000_001B_EAX), but
+ * bit 0 is used to indicate the existence of IBS.
+ */
+#define IBS_CAPS_AVAIL			(1LL<<0)
+#define IBS_CAPS_RDWROPCNT		(1LL<<3)
+#define IBS_CAPS_OPCNT			(1LL<<4)
 
-	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = op_x86_virt_to_phys(i);
-		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
-		else
-			msrs->multiplex[i].addr = 0;
-	}
-}
+/*
+ * IBS randomization macros
+ */
+#define IBS_RANDOM_BITS			12
+#define IBS_RANDOM_MASK			((1ULL << IBS_RANDOM_BITS) - 1)
+#define IBS_RANDOM_MAXCNT_OFFSET	(1ULL << (IBS_RANDOM_BITS - 5))
 
-static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
-			       struct op_msrs const * const msrs)
+static u32 get_ibs_caps(void)
 {
-	u64 val;
-	int i;
-
-	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!counter_config[virt].enabled)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
+	u32 ibs_caps;
+	unsigned int max_level;
 
-#else
+	if (!boot_cpu_has(X86_FEATURE_IBS))
+		return 0;
 
-static inline void op_mux_fill_in_addresses(struct op_msrs * const msrs) { }
+	/* check IBS cpuid feature flags */
+	max_level = cpuid_eax(0x80000000);
+	if (max_level < IBS_CPUID_FEATURES)
+		return IBS_CAPS_AVAIL;
 
-#endif
+	ibs_caps = cpuid_eax(IBS_CPUID_FEATURES);
+	if (!(ibs_caps & IBS_CAPS_AVAIL))
+		/* cpuid flags not valid */
+		return IBS_CAPS_AVAIL;
 
-/* functions for op_amd_spec */
+	return ibs_caps;
+}
 
-static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
+/*
+ * 16-bit Linear Feedback Shift Register (LFSR)
+ *
+ *                       16   14   13    11
+ * Feedback polynomial = X  + X  + X  +  X  + 1
+ */
+static unsigned int lfsr_random(void)
 {
-	int i;
+	static unsigned int lfsr_value = 0xF00D;
+	unsigned int bit;
 
-	for (i = 0; i < NUM_COUNTERS; i++) {
-		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
-		else
-			msrs->counters[i].addr = 0;
-	}
+	/* Compute next bit to shift in */
+	bit = ((lfsr_value >> 0) ^
+	       (lfsr_value >> 2) ^
+	       (lfsr_value >> 3) ^
+	       (lfsr_value >> 5)) & 0x0001;
 
-	for (i = 0; i < NUM_CONTROLS; i++) {
-		if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
-			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
-		else
-			msrs->controls[i].addr = 0;
-	}
+	/* Advance to next register value */
+	lfsr_value = (lfsr_value >> 1) | (bit << 15);
 
-	op_mux_fill_in_addresses(msrs);
+	return lfsr_value;
 }
 
-static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
-			      struct op_msrs const * const msrs)
+/*
+ * IBS software randomization
+ *
+ * The IBS periodic op counter is randomized in software. The lower 12
+ * bits of the 20 bit counter are randomized. IbsOpCurCnt is
+ * initialized with a 12 bit random value.
+ */
+static inline u64 op_amd_randomize_ibs_op(u64 val)
 {
-	u64 val;
-	int i;
-
-	/* setup reset_value */
-	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
-		if (counter_config[i].enabled)
-			reset_value[i] = counter_config[i].count;
-		else
-			reset_value[i] = 0;
-	}
-
-	/* clear all counters */
-	for (i = 0; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!msrs->controls[i].addr))
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-
-	/* avoid a false detection of ctr overflows in NMI handler */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!msrs->counters[i].addr))
-			continue;
-		wrmsrl(msrs->counters[i].addr, -1LL);
-	}
-
-	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!counter_config[virt].enabled)
-			continue;
-		if (!msrs->counters[i].addr)
-			continue;
-
-		/* setup counter registers */
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
-
-		/* setup control registers */
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
+	unsigned int random = lfsr_random();
+
+	if (!(ibs_caps & IBS_CAPS_RDWROPCNT))
+		/*
+		 * Work around if the hw can not write to IbsOpCurCnt
+		 *
+		 * Randomize the lower 8 bits of the 16 bit
+		 * IbsOpMaxCnt [15:0] value in the range of -128 to
+		 * +127 by adding/subtracting an offset to the
+		 * maximum count (IbsOpMaxCnt).
+		 *
+		 * To avoid over or underflows and protect upper bits
+		 * starting at bit 16, the initial value for
+		 * IbsOpMaxCnt must fit in the range from 0x0081 to
+		 * 0xff80.
+		 */
+		val += (s8)(random >> 4);
+	else
+		val |= (u64)(random & IBS_RANDOM_MASK) << 32;
+
+	return val;
 }
 
-#ifdef CONFIG_OPROFILE_IBS
-
 static inline void
 op_amd_handle_ibs(struct pt_regs * const regs,
 		  struct op_msrs const * const msrs)
@@ -194,7 +164,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	u64 val, ctl;
 	struct op_entry entry;
 
-	if (!has_ibs)
+	if (!ibs_caps)
 		return;
 
 	if (ibs_config.fetch_enabled) {
@@ -210,7 +180,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT);
 			ctl |= IBS_FETCH_ENABLE;
 			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
 		}
@@ -236,8 +206,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			ctl &= ~IBS_OP_VAL & 0xFFFFFFFF;
-			ctl |= IBS_OP_ENABLE;
+			ctl = op_amd_randomize_ibs_op(ibs_op_ctl);
 			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
 		}
 	}
@@ -246,41 +215,176 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 static inline void op_amd_start_ibs(void)
 {
 	u64 val;
-	if (has_ibs && ibs_config.fetch_enabled) {
-		val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+
+	if (!ibs_caps)
+		return;
+
+	if (ibs_config.fetch_enabled) {
+		val = (ibs_config.max_cnt_fetch >> 4) & IBS_FETCH_MAX_CNT;
 		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
 		val |= IBS_FETCH_ENABLE;
 		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
 	}
 
-	if (has_ibs && ibs_config.op_enabled) {
-		val = (ibs_config.max_cnt_op >> 4) & 0xFFFF;
-		val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
-		val |= IBS_OP_ENABLE;
+	if (ibs_config.op_enabled) {
+		ibs_op_ctl = ibs_config.max_cnt_op >> 4;
+		if (!(ibs_caps & IBS_CAPS_RDWROPCNT)) {
+			/*
+			 * IbsOpCurCnt not supported.  See
+			 * op_amd_randomize_ibs_op() for details.
+			 */
+			ibs_op_ctl = clamp(ibs_op_ctl, 0x0081ULL, 0xFF80ULL);
+		} else {
+			/*
+			 * The start value is randomized with a
+			 * positive offset, we need to compensate it
+			 * with the half of the randomized range. Also
+			 * avoid underflows.
+			 */
+			ibs_op_ctl = min(ibs_op_ctl + IBS_RANDOM_MAXCNT_OFFSET,
+					 IBS_OP_MAX_CNT);
+		}
+		if (ibs_caps & IBS_CAPS_OPCNT && ibs_config.dispatched_ops)
+			ibs_op_ctl |= IBS_OP_CNT_CTL;
+		ibs_op_ctl |= IBS_OP_ENABLE;
+		val = op_amd_randomize_ibs_op(ibs_op_ctl);
 		wrmsrl(MSR_AMD64_IBSOPCTL, val);
 	}
 }
 
 static void op_amd_stop_ibs(void)
 {
-	if (has_ibs && ibs_config.fetch_enabled)
+	if (!ibs_caps)
+		return;
+
+	if (ibs_config.fetch_enabled)
 		/* clear max count and enable */
 		wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
 
-	if (has_ibs && ibs_config.op_enabled)
+	if (ibs_config.op_enabled)
 		/* clear max count and enable */
 		wrmsrl(MSR_AMD64_IBSOPCTL, 0);
 }
 
-#else
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 
-static inline void op_amd_handle_ibs(struct pt_regs * const regs,
-				    struct op_msrs const * const msrs) { }
-static inline void op_amd_start_ibs(void) { }
-static inline void op_amd_stop_ibs(void) { }
+static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
+			       struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (!reset_value[virt])
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
+	}
+}
 
 #endif
 
+/* functions for op_amd_spec */
+
+static void op_amd_shutdown(struct op_msrs const * const msrs)
+{
+	int i;
+
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		if (!msrs->counters[i].addr)
+			continue;
+		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+		release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+	}
+}
+
+static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
+{
+	int i;
+
+	for (i = 0; i < NUM_COUNTERS; i++) {
+		if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			goto fail;
+		if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) {
+			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+			goto fail;
+		}
+		/* both registers must be reserved */
+		msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
+		msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+		continue;
+	fail:
+		if (!counter_config[i].enabled)
+			continue;
+		op_x86_warn_reserved(i);
+		op_amd_shutdown(msrs);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
+			      struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* setup reset_value */
+	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
+		if (counter_config[i].enabled
+		    && msrs->counters[op_x86_virt_to_phys(i)].addr)
+			reset_value[i] = counter_config[i].count;
+		else
+			reset_value[i] = 0;
+	}
+
+	/* clear all counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		if (!msrs->controls[i].addr)
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
+			op_x86_warn_in_use(i);
+		val &= model->reserved;
+		wrmsrl(msrs->controls[i].addr, val);
+		/*
+		 * avoid a false detection of ctr overflows in NMI
+		 * handler
+		 */
+		wrmsrl(msrs->counters[i].addr, -1LL);
+	}
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (!reset_value[virt])
+			continue;
+
+		/* setup counter registers */
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
+
+		/* setup control registers */
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
+	}
+
+	if (ibs_caps)
+		setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0);
+}
+
+static void op_amd_cpu_shutdown(void)
+{
+	if (ibs_caps)
+		setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
+}
+
 static int op_amd_check_ctrs(struct pt_regs * const regs,
 			     struct op_msrs const * const msrs)
 {
@@ -314,7 +418,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
@@ -334,51 +438,23 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	op_amd_stop_ibs();
 }
 
-static void op_amd_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (msrs->counters[i].addr)
-			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-	}
-	for (i = 0; i < NUM_CONTROLS; ++i) {
-		if (msrs->controls[i].addr)
-			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-}
-
-#ifdef CONFIG_OPROFILE_IBS
-
-static u8 ibs_eilvt_off;
-
-static inline void apic_init_ibs_nmi_per_cpu(void *arg)
-{
-	ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_NMI, 0);
-}
-
-static inline void apic_clear_ibs_nmi_per_cpu(void *arg)
-{
-	setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
-}
-
-static int init_ibs_nmi(void)
+static int __init_ibs_nmi(void)
 {
 #define IBSCTL_LVTOFFSETVAL		(1 << 8)
 #define IBSCTL				0x1cc
 	struct pci_dev *cpu_cfg;
 	int nodes;
 	u32 value = 0;
+	u8 ibs_eilvt_off;
 
-	/* per CPU setup */
-	on_each_cpu(apic_init_ibs_nmi_per_cpu, NULL, 1);
+	ibs_eilvt_off = setup_APIC_eilvt_ibs(0, APIC_EILVT_MSG_FIX, 1);
 
 	nodes = 0;
 	cpu_cfg = NULL;
@@ -405,48 +481,24 @@ static int init_ibs_nmi(void)
 		return 1;
 	}
 
-#ifdef CONFIG_NUMA
-	/* Sanity check */
-	/* Works only for 64bit with proper numa implementation. */
-	if (nodes != num_possible_nodes()) {
-		printk(KERN_DEBUG "Failed to setup CPU node(s) for IBS, "
-			"found: %d, expected %d",
-			nodes, num_possible_nodes());
-		return 1;
-	}
-#endif
 	return 0;
 }
 
-/* uninitialize the APIC for the IBS interrupts if needed */
-static void clear_ibs_nmi(void)
-{
-	if (has_ibs)
-		on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1);
-}
-
 /* initialize the APIC for the IBS interrupts if available */
-static void ibs_init(void)
+static void init_ibs(void)
 {
-	has_ibs = boot_cpu_has(X86_FEATURE_IBS);
+	ibs_caps = get_ibs_caps();
 
-	if (!has_ibs)
+	if (!ibs_caps)
 		return;
 
-	if (init_ibs_nmi()) {
-		has_ibs = 0;
+	if (__init_ibs_nmi()) {
+		ibs_caps = 0;
 		return;
 	}
 
-	printk(KERN_INFO "oprofile: AMD IBS detected\n");
-}
-
-static void ibs_exit(void)
-{
-	if (!has_ibs)
-		return;
-
-	clear_ibs_nmi();
+	printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n",
+	       (unsigned)ibs_caps);
 }
 
 static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
@@ -463,7 +515,7 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 	if (ret)
 		return ret;
 
-	if (!has_ibs)
+	if (!ibs_caps)
 		return ret;
 
 	/* model specific files */
@@ -473,7 +525,7 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 	ibs_config.fetch_enabled = 0;
 	ibs_config.max_cnt_op = 250000;
 	ibs_config.op_enabled = 0;
-	ibs_config.dispatched_ops = 1;
+	ibs_config.dispatched_ops = 0;
 
 	dir = oprofilefs_mkdir(sb, root, "ibs_fetch");
 	oprofilefs_create_ulong(sb, dir, "enable",
@@ -488,48 +540,31 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 				&ibs_config.op_enabled);
 	oprofilefs_create_ulong(sb, dir, "max_count",
 				&ibs_config.max_cnt_op);
-	oprofilefs_create_ulong(sb, dir, "dispatched_ops",
-				&ibs_config.dispatched_ops);
+	if (ibs_caps & IBS_CAPS_OPCNT)
+		oprofilefs_create_ulong(sb, dir, "dispatched_ops",
+					&ibs_config.dispatched_ops);
 
 	return 0;
 }
 
 static int op_amd_init(struct oprofile_operations *ops)
 {
-	ibs_init();
+	init_ibs();
 	create_arch_files = ops->create_files;
 	ops->create_files = setup_ibs_files;
 	return 0;
 }
 
-static void op_amd_exit(void)
-{
-	ibs_exit();
-}
-
-#else
-
-/* no IBS support */
-
-static int op_amd_init(struct oprofile_operations *ops)
-{
-	return 0;
-}
-
-static void op_amd_exit(void) {}
-
-#endif /* CONFIG_OPROFILE_IBS */
-
 struct op_x86_model_spec op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
-	.num_controls		= NUM_CONTROLS,
+	.num_controls		= NUM_COUNTERS,
 	.num_virt_counters	= NUM_VIRT_COUNTERS,
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
-	.exit			= op_amd_exit,
 	.fill_in_addresses	= &op_amd_fill_in_addresses,
 	.setup_ctrs		= &op_amd_setup_ctrs,
+	.cpu_down		= &op_amd_cpu_shutdown,
 	.check_ctrs		= &op_amd_check_ctrs,
 	.start			= &op_amd_start,
 	.stop			= &op_amd_stop,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index ac6b354..182558d 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -385,8 +385,26 @@ static unsigned int get_stagger(void)
 
 static unsigned long reset_value[NUM_COUNTERS_NON_HT];
 
+static void p4_shutdown(struct op_msrs const * const msrs)
+{
+	int i;
+
+	for (i = 0; i < num_counters; ++i) {
+		if (msrs->counters[i].addr)
+			release_perfctr_nmi(msrs->counters[i].addr);
+	}
+	/*
+	 * some of the control registers are specially reserved in
+	 * conjunction with the counter registers (hence the starting offset).
+	 * This saves a few bits.
+	 */
+	for (i = num_counters; i < num_controls; ++i) {
+		if (msrs->controls[i].addr)
+			release_evntsel_nmi(msrs->controls[i].addr);
+	}
+}
 
-static void p4_fill_in_addresses(struct op_msrs * const msrs)
+static int p4_fill_in_addresses(struct op_msrs * const msrs)
 {
 	unsigned int i;
 	unsigned int addr, cccraddr, stag;
@@ -394,12 +412,6 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs)
 	setup_num_counters();
 	stag = get_stagger();
 
-	/* initialize some registers */
-	for (i = 0; i < num_counters; ++i)
-		msrs->counters[i].addr = 0;
-	for (i = 0; i < num_controls; ++i)
-		msrs->controls[i].addr = 0;
-
 	/* the counter & cccr registers we pay attention to */
 	for (i = 0; i < num_counters; ++i) {
 		addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
@@ -474,6 +486,18 @@ static void p4_fill_in_addresses(struct op_msrs * const msrs)
 			msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
 		}
 	}
+
+	for (i = 0; i < num_counters; ++i) {
+		if (!counter_config[i].enabled)
+			continue;
+		if (msrs->controls[i].addr)
+			continue;
+		op_x86_warn_reserved(i);
+		p4_shutdown(msrs);
+		return -EBUSY;
+	}
+
+	return 0;
 }
 
 
@@ -674,26 +698,6 @@ static void p4_stop(struct op_msrs const * const msrs)
 	}
 }
 
-static void p4_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (msrs->counters[i].addr)
-			release_perfctr_nmi(msrs->counters[i].addr);
-	}
-	/*
-	 * some of the control registers are specially reserved in
-	 * conjunction with the counter registers (hence the starting offset).
-	 * This saves a few bits.
-	 */
-	for (i = num_counters; i < num_controls; ++i) {
-		if (msrs->controls[i].addr)
-			release_evntsel_nmi(msrs->controls[i].addr);
-	}
-}
-
-
 #ifdef CONFIG_SMP
 struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 8eb0587..d769cda 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -30,23 +30,46 @@ static int counter_width = 32;
 
 static u64 *reset_value;
 
-static void ppro_fill_in_addresses(struct op_msrs * const msrs)
+static void ppro_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0; i < num_counters; i++) {
-		if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
-			msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
-		else
-			msrs->counters[i].addr = 0;
+	for (i = 0; i < num_counters; ++i) {
+		if (!msrs->counters[i].addr)
+			continue;
+		release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
+		release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
+	}
+	if (reset_value) {
+		kfree(reset_value);
+		reset_value = NULL;
 	}
+}
+
+static int ppro_fill_in_addresses(struct op_msrs * const msrs)
+{
+	int i;
 
 	for (i = 0; i < num_counters; i++) {
-		if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
-			msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
-		else
-			msrs->controls[i].addr = 0;
+		if (!reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
+			goto fail;
+		if (!reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) {
+			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
+			goto fail;
+		}
+		/* both registers must be reserved */
+		msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
+		msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
+		continue;
+	fail:
+		if (!counter_config[i].enabled)
+			continue;
+		op_x86_warn_reserved(i);
+		ppro_shutdown(msrs);
+		return -EBUSY;
 	}
+
+	return 0;
 }
 
 
@@ -57,7 +80,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	int i;
 
 	if (!reset_value) {
-		reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
+		reset_value = kzalloc(sizeof(reset_value[0]) * num_counters,
 					GFP_ATOMIC);
 		if (!reset_value)
 			return;
@@ -82,17 +105,17 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all counters */
 	for (i = 0; i < num_counters; ++i) {
-		if (unlikely(!msrs->controls[i].addr))
+		if (!msrs->controls[i].addr)
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
+			op_x86_warn_in_use(i);
 		val &= model->reserved;
 		wrmsrl(msrs->controls[i].addr, val);
-	}
-
-	/* avoid a false detection of ctr overflows in NMI handler */
-	for (i = 0; i < num_counters; ++i) {
-		if (unlikely(!msrs->counters[i].addr))
-			continue;
+		/*
+		 * avoid a false detection of ctr overflows in NMI *
+		 * handler
+		 */
 		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
@@ -161,7 +184,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			val |= ARCH_PERFMON_EVENTSEL_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
@@ -179,30 +202,11 @@ static void ppro_stop(struct op_msrs const * const msrs)
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
 		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
-static void ppro_shutdown(struct op_msrs const * const msrs)
-{
-	int i;
-
-	for (i = 0; i < num_counters; ++i) {
-		if (msrs->counters[i].addr)
-			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
-	}
-	for (i = 0; i < num_counters; ++i) {
-		if (msrs->controls[i].addr)
-			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
-	}
-	if (reset_value) {
-		kfree(reset_value);
-		reset_value = NULL;
-	}
-}
-
-
 struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
@@ -234,11 +238,11 @@ static void arch_perfmon_setup_counters(void)
 	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
 		current_cpu_data.x86_model == 15) {
 		eax.split.version_id = 2;
-		eax.split.num_events = 2;
+		eax.split.num_counters = 2;
 		eax.split.bit_width = 40;
 	}
 
-	num_counters = eax.split.num_events;
+	num_counters = eax.split.num_counters;
 
 	op_arch_perfmon_spec.num_counters = num_counters;
 	op_arch_perfmon_spec.num_controls = num_counters;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 7b8e75d..89017fa 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -40,10 +40,10 @@ struct op_x86_model_spec {
 	u64		reserved;
 	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
-	void		(*exit)(void);
-	void		(*fill_in_addresses)(struct op_msrs * const msrs);
+	int		(*fill_in_addresses)(struct op_msrs * const msrs);
 	void		(*setup_ctrs)(struct op_x86_model_spec const *model,
 				      struct op_msrs const * const msrs);
+	void		(*cpu_down)(void);
 	int		(*check_ctrs)(struct pt_regs * const regs,
 				      struct op_msrs const * const msrs);
 	void		(*start)(struct op_msrs const * const msrs);
@@ -57,6 +57,26 @@ struct op_x86_model_spec {
 
 struct op_counter_config;
 
+static inline void op_x86_warn_in_use(int counter)
+{
+	/*
+	 * The warning indicates an already running counter. If
+	 * oprofile doesn't collect data, then try using a different
+	 * performance counter on your platform to monitor the desired
+	 * event. Delete counter #%d from the desired event by editing
+	 * the /usr/share/oprofile/%s/<cpu>/events file. If the event
+	 * cannot be monitored by any other counter, contact your
+	 * hardware or BIOS vendor.
+	 */
+	pr_warning("oprofile: counter #%d on cpu #%d may already be used\n",
+		   counter, smp_processor_id());
+}
+
+static inline void op_x86_warn_reserved(int counter)
+{
+	pr_warning("oprofile: counter #%d is already reserved\n", counter);
+}
+
 extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
 extern int op_x86_phys_to_virt(int phys);
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 39fba37..a0207a7 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,9 +13,12 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
+obj-$(CONFIG_X86_MRST)		+= mrst.o
+
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o
+obj-y				+= amd_bus.o bus_numa.o
+
+obj-$(CONFIG_PCI_CNB20LE_QUIRK)	+= broadcom_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 959e548..2ec04c4 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/dmi.h>
+#include <linux/slab.h>
 #include <asm/numa.h>
 #include <asm/pci_x86.h>
 
@@ -15,19 +16,94 @@ struct pci_root_info {
 	int busnum;
 };
 
+static bool pci_use_crs = true;
+
+static int __init set_use_crs(const struct dmi_system_id *id)
+{
+	pci_use_crs = true;
+	return 0;
+}
+
+static const struct dmi_system_id pci_use_crs_table[] __initconst = {
+	/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
+	{
+		.callback = set_use_crs,
+		.ident = "IBM System x3800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+		},
+	},
+	{}
+};
+
+void __init pci_acpi_crs_quirks(void)
+{
+	int year;
+
+	if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
+		pci_use_crs = false;
+
+	dmi_check_system(pci_use_crs_table);
+
+	/*
+	 * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
+	 * takes precedence over anything we figured out above.
+	 */
+	if (pci_probe & PCI_ROOT_NO_CRS)
+		pci_use_crs = false;
+	else if (pci_probe & PCI_USE__CRS)
+		pci_use_crs = true;
+
+	printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
+	       "if necessary, use \"pci=%s\" and report a bug\n",
+	       pci_use_crs ? "Using" : "Ignoring",
+	       pci_use_crs ? "nocrs" : "use_crs");
+}
+
 static acpi_status
 resource_to_addr(struct acpi_resource *resource,
 			struct acpi_resource_address64 *addr)
 {
 	acpi_status status;
-
-	status = acpi_resource_to_address64(resource, addr);
-	if (ACPI_SUCCESS(status) &&
-	    (addr->resource_type == ACPI_MEMORY_RANGE ||
-	    addr->resource_type == ACPI_IO_RANGE) &&
-	    addr->address_length > 0 &&
-	    addr->producer_consumer == ACPI_PRODUCER) {
+	struct acpi_resource_memory24 *memory24;
+	struct acpi_resource_memory32 *memory32;
+	struct acpi_resource_fixed_memory32 *fixed_memory32;
+
+	memset(addr, 0, sizeof(*addr));
+	switch (resource->type) {
+	case ACPI_RESOURCE_TYPE_MEMORY24:
+		memory24 = &resource->data.memory24;
+		addr->resource_type = ACPI_MEMORY_RANGE;
+		addr->minimum = memory24->minimum;
+		addr->address_length = memory24->address_length;
+		addr->maximum = addr->minimum + addr->address_length - 1;
+		return AE_OK;
+	case ACPI_RESOURCE_TYPE_MEMORY32:
+		memory32 = &resource->data.memory32;
+		addr->resource_type = ACPI_MEMORY_RANGE;
+		addr->minimum = memory32->minimum;
+		addr->address_length = memory32->address_length;
+		addr->maximum = addr->minimum + addr->address_length - 1;
 		return AE_OK;
+	case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+		fixed_memory32 = &resource->data.fixed_memory32;
+		addr->resource_type = ACPI_MEMORY_RANGE;
+		addr->minimum = fixed_memory32->address;
+		addr->address_length = fixed_memory32->address_length;
+		addr->maximum = addr->minimum + addr->address_length - 1;
+		return AE_OK;
+	case ACPI_RESOURCE_TYPE_ADDRESS16:
+	case ACPI_RESOURCE_TYPE_ADDRESS32:
+	case ACPI_RESOURCE_TYPE_ADDRESS64:
+		status = acpi_resource_to_address64(resource, addr);
+		if (ACPI_SUCCESS(status) &&
+		    (addr->resource_type == ACPI_MEMORY_RANGE ||
+		    addr->resource_type == ACPI_IO_RANGE) &&
+		    addr->address_length > 0) {
+			return AE_OK;
+		}
+		break;
 	}
 	return AE_ERROR;
 }
@@ -45,44 +121,6 @@ count_resource(struct acpi_resource *acpi_res, void *data)
 	return AE_OK;
 }
 
-static int
-bus_has_transparent_bridge(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 class = dev->class >> 8;
-
-		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent)
-			return true;
-	}
-	return false;
-}
-
-static void
-align_resource(struct acpi_device *bridge, struct resource *res)
-{
-	int align = (res->flags & IORESOURCE_MEM) ? 16 : 4;
-
-	/*
-	 * Host bridge windows are not BARs, but the decoders on the PCI side
-	 * that claim this address space have starting alignment and length
-	 * constraints, so fix any obvious BIOS goofs.
-	 */
-	if (!IS_ALIGNED(res->start, align)) {
-		dev_printk(KERN_DEBUG, &bridge->dev,
-			   "host bridge window %pR invalid; "
-			   "aligning start to %d-byte boundary\n", res, align);
-		res->start &= ~(align - 1);
-	}
-	if (!IS_ALIGNED(res->end + 1, align)) {
-		dev_printk(KERN_DEBUG, &bridge->dev,
-			   "host bridge window %pR invalid; "
-			   "aligning end to %d-byte boundary\n", res, align);
-		res->end = ALIGN(res->end, align) - 1;
-	}
-}
-
 static acpi_status
 setup_resource(struct acpi_resource *acpi_res, void *data)
 {
@@ -91,13 +129,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	struct resource *root;
-	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+	struct resource *root, *conflict;
 	u64 start, end;
 
-	if (bus_has_transparent_bridge(info->bus))
-		max_root_bus_resources -= 3;
-
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;
@@ -114,16 +148,7 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	start = addr.minimum + addr.translation_offset;
-	end = start + addr.address_length - 1;
-	if (info->res_num >= max_root_bus_resources) {
-		if (pci_probe & PCI_USE__CRS)
-			printk(KERN_WARNING "PCI: Failed to allocate "
-			       "0x%lx-0x%lx from %s for %s due to _CRS "
-			       "returning more than %d resource descriptors\n",
-			       (unsigned long) start, (unsigned long) end,
-			       root->name, info->name, max_root_bus_resources);
-		return AE_OK;
-	}
+	end = addr.maximum + addr.translation_offset;
 
 	res = &info->res[info->res_num];
 	res->name = info->name;
@@ -131,19 +156,21 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	res->start = start;
 	res->end = end;
 	res->child = NULL;
-	align_resource(info->bridge, res);
 
-	if (!(pci_probe & PCI_USE__CRS)) {
+	if (!pci_use_crs) {
 		dev_printk(KERN_DEBUG, &info->bridge->dev,
 			   "host bridge window %pR (ignored)\n", res);
 		return AE_OK;
 	}
 
-	if (insert_resource(root, res)) {
+	conflict = insert_resource_conflict(root, res);
+	if (conflict) {
 		dev_err(&info->bridge->dev,
-			"can't allocate host bridge window %pR\n", res);
+			"address space collision: host bridge window %pR "
+			"conflicts with %s %pR\n",
+			res, conflict->name, conflict);
 	} else {
-		info->bus->resource[info->res_num] = res;
+		pci_bus_add_resource(info->bus, res, 0);
 		info->res_num++;
 		if (addr.translation_offset)
 			dev_info(&info->bridge->dev, "host bridge window %pR "
@@ -164,10 +191,8 @@ get_current_resources(struct acpi_device *device, int busnum,
 	struct pci_root_info info;
 	size_t size;
 
-	if (!(pci_probe & PCI_USE__CRS))
-		dev_info(&device->dev,
-			 "ignoring host bridge windows from ACPI; "
-			 "boot with \"pci=use_crs\" to use them\n");
+	if (pci_use_crs)
+		pci_bus_remove_resources(bus);
 
 	info.bridge = device;
 	info.bus = bus;
@@ -182,10 +207,9 @@ get_current_resources(struct acpi_device *device, int busnum,
 	if (!info.res)
 		goto res_alloc_fail;
 
-	info.name = kmalloc(16, GFP_KERNEL);
+	info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
 	if (!info.name)
 		goto name_alloc_fail;
-	sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum);
 
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
@@ -199,8 +223,11 @@ res_alloc_fail:
 	return;
 }
 
-struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum)
+struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
 {
+	struct acpi_device *device = root->device;
+	int domain = root->segment;
+	int busnum = root->secondary.start;
 	struct pci_bus *bus;
 	struct pci_sysdata *sd;
 	int node;
@@ -282,17 +309,14 @@ int __init pci_acpi_init(void)
 {
 	struct pci_dev *dev = NULL;
 
-	if (pcibios_scanned)
-		return 0;
-
 	if (acpi_noirq)
-		return 0;
+		return -ENODEV;
 
 	printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
 	acpi_irq_penalty_init();
-	pcibios_scanned++;
 	pcibios_enable_irq = acpi_pci_irq_enable;
 	pcibios_disable_irq = acpi_pci_irq_disable;
+	x86_init.pci.init_irq = x86_init_noop;
 
 	if (pci_routeirq) {
 		/*
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 95ecbd4..fc1e8fe 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -2,11 +2,11 @@
 #include <linux/pci.h>
 #include <linux/topology.h>
 #include <linux/cpu.h>
+#include <linux/range.h>
+
 #include <asm/pci_x86.h>
 
-#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#endif
 
 #include "bus_numa.h"
 
@@ -15,60 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_X86_64
-
-#define RANGE_NUM 16
-
-struct res_range {
-	size_t start;
-	size_t end;
-};
-
-static void __init update_range(struct res_range *range, size_t start,
-				size_t end)
-{
-	int i;
-	int j;
-
-	for (j = 0; j < RANGE_NUM; j++) {
-		if (!range[j].end)
-			continue;
-
-		if (start <= range[j].start && end >= range[j].end) {
-			range[j].start = 0;
-			range[j].end = 0;
-			continue;
-		}
-
-		if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) {
-			range[j].start = end + 1;
-			continue;
-		}
-
-
-		if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) {
-			range[j].end = start - 1;
-			continue;
-		}
-
-		if (start > range[j].start && end < range[j].end) {
-			/* find the new spare */
-			for (i = 0; i < RANGE_NUM; i++) {
-				if (range[i].end == 0)
-					break;
-			}
-			if (i < RANGE_NUM) {
-				range[i].end = range[j].end;
-				range[i].start = end + 1;
-			} else {
-				printk(KERN_ERR "run of slot in ranges\n");
-			}
-			range[j].end = start - 1;
-			continue;
-		}
-	}
-}
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -111,6 +57,8 @@ static void __init get_pci_mmcfg_amd_fam10h_range(void)
 	fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
 }
 
+#define RANGE_NUM 16
+
 /**
  * early_fill_mp_bus_to_node()
  * called before pcibios_scan_root and pci_scan_bus
@@ -130,16 +78,17 @@ static int __init early_fill_mp_bus_info(void)
 	struct pci_root_info *info;
 	u32 reg;
 	struct resource *res;
-	size_t start;
-	size_t end;
-	struct res_range range[RANGE_NUM];
+	u64 start;
+	u64 end;
+	struct range range[RANGE_NUM];
 	u64 val;
 	u32 address;
+	bool found;
 
 	if (!early_pci_allowed())
 		return -1;
 
-	found_all_numa_early = 0;
+	found = false;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
 		u32 id;
 		u16 device;
@@ -153,12 +102,12 @@ static int __init early_fill_mp_bus_info(void)
 		device = (id>>16) & 0xffff;
 		if (pci_probes[i].vendor == vendor &&
 		    pci_probes[i].device == device) {
-			found_all_numa_early = 1;
+			found = true;
 			break;
 		}
 	}
 
-	if (!found_all_numa_early)
+	if (!found)
 		return 0;
 
 	pci_root_num = 0;
@@ -196,7 +145,7 @@ static int __init early_fill_mp_bus_info(void)
 	def_link = (reg >> 8) & 0x03;
 
 	memset(range, 0, sizeof(range));
-	range[0].end = 0xffff;
+	add_range(range, RANGE_NUM, 0, 0, 0xffff + 1);
 	/* io port resource */
 	for (i = 0; i < 4; i++) {
 		reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
@@ -220,13 +169,13 @@ static int __init early_fill_mp_bus_info(void)
 
 		info = &pci_root_info[j];
 		printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
-		       node, link, (u64)start, (u64)end);
+		       node, link, start, end);
 
 		/* kernel only handle 16 bit only */
 		if (end > 0xffff)
 			end = 0xffff;
 		update_res(info, start, end, IORESOURCE_IO, 1);
-		update_range(range, start, end);
+		subtract_range(range, RANGE_NUM, start, end + 1);
 	}
 	/* add left over io port range to def node/link, [0, 0xffff] */
 	/* find the position */
@@ -241,29 +190,32 @@ static int __init early_fill_mp_bus_info(void)
 			if (!range[i].end)
 				continue;
 
-			update_res(info, range[i].start, range[i].end,
+			update_res(info, range[i].start, range[i].end - 1,
 				   IORESOURCE_IO, 1);
 		}
 	}
 
 	memset(range, 0, sizeof(range));
 	/* 0xfd00000000-0xffffffffff for HT */
-	range[0].end = (0xfdULL<<32) - 1;
+	end = cap_resource((0xfdULL<<32) - 1);
+	end++;
+	add_range(range, RANGE_NUM, 0, 0, end);
 
 	/* need to take out [0, TOM) for RAM*/
 	address = MSR_K8_TOP_MEM1;
 	rdmsrl(address, val);
 	end = (val & 0xffffff800000ULL);
-	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+	printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20);
 	if (end < (1ULL<<32))
-		update_range(range, 0, end - 1);
+		subtract_range(range, RANGE_NUM, 0, end);
 
 	/* get mmconfig */
 	get_pci_mmcfg_amd_fam10h_range();
 	/* need to take out mmconf range */
 	if (fam10h_mmconf_end) {
 		printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
-		update_range(range, fam10h_mmconf_start, fam10h_mmconf_end);
+		subtract_range(range, RANGE_NUM, fam10h_mmconf_start,
+				 fam10h_mmconf_end + 1);
 	}
 
 	/* mmio resource */
@@ -293,7 +245,7 @@ static int __init early_fill_mp_bus_info(void)
 		info = &pci_root_info[j];
 
 		printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
-		       node, link, (u64)start, (u64)end);
+		       node, link, start, end);
 		/*
 		 * some sick allocation would have range overlap with fam10h
 		 * mmconf range, so need to update start and end.
@@ -318,14 +270,15 @@ static int __init early_fill_mp_bus_info(void)
 				/* we got a hole */
 				endx = fam10h_mmconf_start - 1;
 				update_res(info, start, endx, IORESOURCE_MEM, 0);
-				update_range(range, start, endx);
-				printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
+				subtract_range(range, RANGE_NUM, start,
+						 endx + 1);
+				printk(KERN_CONT " ==> [%llx, %llx]", start, endx);
 				start = fam10h_mmconf_end + 1;
 				changed = 1;
 			}
 			if (changed) {
 				if (start <= end) {
-					printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
+					printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end);
 				} else {
 					printk(KERN_CONT "%s\n", endx?"":" ==> none");
 					continue;
@@ -333,8 +286,9 @@ static int __init early_fill_mp_bus_info(void)
 			}
 		}
 
-		update_res(info, start, end, IORESOURCE_MEM, 1);
-		update_range(range, start, end);
+		update_res(info, cap_resource(start), cap_resource(end),
+				 IORESOURCE_MEM, 1);
+		subtract_range(range, RANGE_NUM, start, end + 1);
 		printk(KERN_CONT "\n");
 	}
 
@@ -348,8 +302,8 @@ static int __init early_fill_mp_bus_info(void)
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
 		end = (val & 0xffffff800000ULL);
-		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
-		update_range(range, 1ULL<<32, end - 1);
+		printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20);
+		subtract_range(range, RANGE_NUM, 1ULL<<32, end);
 	}
 
 	/*
@@ -368,7 +322,8 @@ static int __init early_fill_mp_bus_info(void)
 			if (!range[i].end)
 				continue;
 
-			update_res(info, range[i].start, range[i].end,
+			update_res(info, cap_resource(range[i].start),
+				   cap_resource(range[i].end - 1),
 				   IORESOURCE_MEM, 1);
 		}
 	}
@@ -384,24 +339,14 @@ static int __init early_fill_mp_bus_info(void)
 		       info->bus_min, info->bus_max, info->node, info->link);
 		for (j = 0; j < res_num; j++) {
 			res = &info->res[j];
-			printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
-			       busnum, j,
-			       (res->flags & IORESOURCE_IO)?"io port":"mmio",
-			       res->start, res->end);
+			printk(KERN_DEBUG "bus: %02x index %x %pR\n",
+				       busnum, j, res);
 		}
 	}
 
 	return 0;
 }
 
-#else  /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
 static void enable_pci_io_ecs(void *unused)
diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c
new file mode 100644
index 0000000..0846a5b
--- /dev/null
+++ b/arch/x86/pci/broadcom_bus.c
@@ -0,0 +1,101 @@
+/*
+ * Read address ranges from a Broadcom CNB20LE Host Bridge
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/pci_x86.h>
+
+#include "bus_numa.h"
+
+static void __devinit cnb20le_res(struct pci_dev *dev)
+{
+	struct pci_root_info *info;
+	struct resource res;
+	u16 word1, word2;
+	u8 fbus, lbus;
+	int i;
+
+	/*
+	 * The x86_pci_root_bus_res_quirks() function already refuses to use
+	 * this information if ACPI _CRS was used. Therefore, we don't bother
+	 * checking if ACPI is enabled, and just generate the information
+	 * for both the ACPI _CRS and no ACPI cases.
+	 */
+
+	info = &pci_root_info[pci_root_num];
+	pci_root_num++;
+
+	/* read the PCI bus numbers */
+	pci_read_config_byte(dev, 0x44, &fbus);
+	pci_read_config_byte(dev, 0x45, &lbus);
+	info->bus_min = fbus;
+	info->bus_max = lbus;
+
+	/*
+	 * Add the legacy IDE ports on bus 0
+	 *
+	 * These do not exist anywhere in the bridge registers, AFAICT. I do
+	 * not have the datasheet, so this is the best I can do.
+	 */
+	if (fbus == 0) {
+		update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
+		update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
+		update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
+		update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
+		update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
+	}
+
+	/* read the non-prefetchable memory window */
+	pci_read_config_word(dev, 0xc0, &word1);
+	pci_read_config_word(dev, 0xc2, &word2);
+	if (word1 != word2) {
+		res.start = (word1 << 16) | 0x0000;
+		res.end   = (word2 << 16) | 0xffff;
+		res.flags = IORESOURCE_MEM;
+		update_res(info, res.start, res.end, res.flags, 0);
+	}
+
+	/* read the prefetchable memory window */
+	pci_read_config_word(dev, 0xc4, &word1);
+	pci_read_config_word(dev, 0xc6, &word2);
+	if (word1 != word2) {
+		res.start = (word1 << 16) | 0x0000;
+		res.end   = (word2 << 16) | 0xffff;
+		res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+		update_res(info, res.start, res.end, res.flags, 0);
+	}
+
+	/* read the IO port window */
+	pci_read_config_word(dev, 0xd0, &word1);
+	pci_read_config_word(dev, 0xd2, &word2);
+	if (word1 != word2) {
+		res.start = word1;
+		res.end   = word2;
+		res.flags = IORESOURCE_IO;
+		update_res(info, res.start, res.end, res.flags, 0);
+	}
+
+	/* print information about this host bridge */
+	res.start = fbus;
+	res.end   = lbus;
+	res.flags = IORESOURCE_BUS;
+	dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n",
+			    pci_domain_nr(dev->bus), &res);
+
+	for (i = 0; i < info->res_num; i++)
+		dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]);
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
+			cnb20le_res);
+
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index f939d60..64a1228 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -1,11 +1,11 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/range.h>
 
 #include "bus_numa.h"
 
 int pci_root_num;
 struct pci_root_info pci_root_info[PCI_ROOT_NR];
-int found_all_numa_early;
 
 void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 {
@@ -21,10 +21,6 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	if (!pci_root_num)
 		return;
 
-	/* for amd, if only one root bus, don't need to do anything */
-	if (pci_root_num < 2 && found_all_numa_early)
-		return;
-
 	for (i = 0; i < pci_root_num; i++) {
 		if (pci_root_info[i].bus_min == b->number)
 			break;
@@ -36,13 +32,14 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
 			b->number);
 
+	pci_bus_remove_resources(b);
 	info = &pci_root_info[i];
 	for (j = 0; j < info->res_num; j++) {
 		struct resource *res;
 		struct resource *root;
 
 		res = &info->res[j];
-		b->resource[j] = res;
+		pci_bus_add_resource(b, res, 0);
 		if (res->flags & IORESOURCE_IO)
 			root = &ioport_resource;
 		else
@@ -51,8 +48,8 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	}
 }
 
-void __devinit update_res(struct pci_root_info *info, size_t start,
-			      size_t end, unsigned long flags, int merge)
+void __devinit update_res(struct pci_root_info *info, resource_size_t start,
+			  resource_size_t end, unsigned long flags, int merge)
 {
 	int i;
 	struct resource *res;
@@ -60,25 +57,28 @@ void __devinit update_res(struct pci_root_info *info, size_t start,
 	if (start > end)
 		return;
 
+	if (start == MAX_RESOURCE)
+		return;
+
 	if (!merge)
 		goto addit;
 
 	/* try to merge it with old one */
 	for (i = 0; i < info->res_num; i++) {
-		size_t final_start, final_end;
-		size_t common_start, common_end;
+		resource_size_t final_start, final_end;
+		resource_size_t common_start, common_end;
 
 		res = &info->res[i];
 		if (res->flags != flags)
 			continue;
 
-		common_start = max((size_t)res->start, start);
-		common_end = min((size_t)res->end, end);
+		common_start = max(res->start, start);
+		common_end = min(res->end, end);
 		if (common_start > common_end + 1)
 			continue;
 
-		final_start = min((size_t)res->start, start);
-		final_end = max((size_t)res->end, end);
+		final_start = min(res->start, start);
+		final_end = max(res->end, end);
 
 		res->start = final_start;
 		res->end = final_end;
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index adbc23f..804a4b4 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -1,9 +1,8 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
- * root, so need to make sure we have enough slot there, Should we
- * increase PCI_BUS_NUM_RESOURCES?
+ * root, so need to make sure we have enough slot there.
  */
 #define RES_NUM 16
 struct pci_root_info {
@@ -20,8 +19,7 @@ struct pci_root_info {
 #define PCI_ROOT_NR 4
 extern int pci_root_num;
 extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
-extern int found_all_numa_early;
 
-extern void update_res(struct pci_root_info *info, size_t start,
-			      size_t end, unsigned long flags, int merge);
+extern void update_res(struct pci_root_info *info, resource_size_t start,
+		      resource_size_t end, unsigned long flags, int merge);
 #endif
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index d2552c6..215a27a 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -9,6 +9,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
+#include <linux/slab.h>
 
 #include <asm/acpi.h>
 #include <asm/segment.h>
@@ -72,16 +73,10 @@ struct pci_ops pci_root_ops = {
 };
 
 /*
- * legacy, numa, and acpi all want to call pcibios_scan_root
- * from their initcalls. This flag prevents that.
- */
-int pcibios_scanned;
-
-/*
  * This interrupt-safe spinlock protects all accesses to PCI
  * configuration space.
  */
-DEFINE_SPINLOCK(pci_config_lock);
+DEFINE_RAW_SPINLOCK(pci_config_lock);
 
 static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
 {
@@ -520,6 +515,9 @@ char * __devinit  pcibios_setup(char *str)
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "nocrs")) {
+		pci_probe |= PCI_ROOT_NO_CRS;
+		return NULL;
 	} else if (!strcmp(str, "earlydump")) {
 		pci_early_dump_regs = 1;
 		return NULL;
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index 347d882..bd33620 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -27,7 +27,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
 		return -EINVAL;
 	}
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
 
@@ -43,7 +43,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -56,7 +56,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 	if ((bus > 255) || (devfn > 255) || (reg > 4095))
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	outl(PCI_CONF1_ADDRESS(bus, devfn, reg), 0xCF8);
 
@@ -72,7 +72,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -108,7 +108,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
 	if (dev & 0x10) 
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
 	outb((u8)bus, 0xCFA);
@@ -127,7 +127,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
 
 	outb(0, 0xCF8);
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -147,7 +147,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
 	if (dev & 0x10) 
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
 	outb((u8)bus, 0xCFA);
@@ -166,7 +166,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
 
 	outb(0, 0xCF8);    
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5dc9e8c..5525309 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -60,22 +60,23 @@ skip_isa_ioresource_align(struct pci_dev *dev) {
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res,
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
 			resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (skip_isa_ioresource_align(dev))
-			return;
-		if (start & 0x300) {
+			return start;
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
+	} else if (res->flags & IORESOURCE_MEM) {
+		if (start < BIOS_END)
+			start = BIOS_END;
 	}
+	return start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
@@ -95,6 +96,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  *	  the fact the PCI specs explicitly allow address decoders to be
  *	  shared between expansion ROMs and other resource regions, it's
  *	  at least dangerous)
+ *	- bad resource sizes or overlaps with other regions
  *
  *  Our solution:
  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
@@ -129,15 +131,13 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					continue;
 				if (!r->start ||
 				    pci_claim_resource(dev, idx) < 0) {
-					dev_info(&dev->dev,
-						 "can't reserve window %pR\n",
-						 r);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range.
 					 */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
@@ -183,9 +183,8 @@ static void __init pcibios_allocate_resources(int pass)
 					"BAR %d: reserving %pr (d=%d, p=%d)\n",
 					idx, r, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
-					dev_info(&dev->dev,
-						 "can't reserve %pR\n", r);
 					/* We'll assign a new address later */
+					dev->fw_addr[idx] = r->start;
 					r->end -= r->start;
 					r->start = 0;
 				}
@@ -257,10 +256,6 @@ void __init pcibios_resource_survey(void)
  */
 fs_initcall(pcibios_assign_resources);
 
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 25a1f8e..adb62aa 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -1,6 +1,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <asm/pci_x86.h>
+#include <asm/x86_init.h>
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */
@@ -15,10 +16,9 @@ static __init int pci_arch_init(void)
 	if (!(pci_probe & PCI_PROBE_NOEARLY))
 		pci_mmcfg_early_init();
 
-#ifdef CONFIG_PCI_OLPC
-	if (!pci_olpc_init())
-		return 0;	/* skip additional checks if it's an XO */
-#endif
+	if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
+		return 0;
+
 #ifdef CONFIG_PCI_BIOS
 	pci_pcbios_init();
 #endif
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0696d50..9810a0f 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -8,7 +8,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/dmi.h>
 #include <linux/io.h>
@@ -53,7 +52,7 @@ struct irq_router_handler {
 	int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
 };
 
-int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
+int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq;
 void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
 
 /*
@@ -604,6 +603,13 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 		return 1;
 	}
 
+	if ((device >= PCI_DEVICE_ID_INTEL_CPT_LPC_MIN) && 
+		(device <= PCI_DEVICE_ID_INTEL_CPT_LPC_MAX)) {
+		r->name = "PIIX/ICH";
+		r->get = pirq_piix_get;
+		r->set = pirq_piix_set;
+		return 1;
+	}
 	return 0;
 }
 
@@ -1016,7 +1022,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	return 1;
 }
 
-static void __init pcibios_fixup_irqs(void)
+void __init pcibios_fixup_irqs(void)
 {
 	struct pci_dev *dev = NULL;
 	u8 pin;
@@ -1110,12 +1116,12 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 	{ }
 };
 
-int __init pcibios_irq_init(void)
+void __init pcibios_irq_init(void)
 {
 	DBG(KERN_DEBUG "PCI: IRQ init\n");
 
-	if (pcibios_enable_irq || raw_pci_ops == NULL)
-		return 0;
+	if (raw_pci_ops == NULL)
+		return;
 
 	dmi_check_system(pciirq_dmi_table);
 
@@ -1142,9 +1148,7 @@ int __init pcibios_irq_init(void)
 			pirq_table = NULL;
 	}
 
-	pcibios_enable_irq = pirq_enable_irq;
-
-	pcibios_fixup_irqs();
+	x86_init.pci.fixup_irqs();
 
 	if (io_apic_assign_pci_irqs && pci_routeirq) {
 		struct pci_dev *dev = NULL;
@@ -1157,8 +1161,6 @@ int __init pcibios_irq_init(void)
 		for_each_pci_dev(dev)
 			pirq_enable_irq(dev);
 	}
-
-	return 0;
 }
 
 static void pirq_penalize_isa_irq(int irq, int active)
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 4061bb0..8d460ea 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -11,40 +11,23 @@
  */
 static void __devinit pcibios_fixup_peer_bridges(void)
 {
-	int n, devfn;
-	long node;
+	int n;
 
 	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
-	for (n=0; n <= pcibios_last_bus; n++) {
-		u32 l;
-		if (pci_find_bus(0, n))
-			continue;
-		node = get_mp_bus_to_node(n);
-		for (devfn = 0; devfn < 256; devfn += 8) {
-			if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) &&
-			    l != 0x0000 && l != 0xffff) {
-				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
-				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus_on_node(n, &pci_root_ops, node);
-				break;
-			}
-		}
-	}
+	for (n=0; n <= pcibios_last_bus; n++)
+		pcibios_scan_specific_bus(n);
 }
 
-static int __init pci_legacy_init(void)
+int __init pci_legacy_init(void)
 {
 	if (!raw_pci_ops) {
 		printk("PCI: System does not support PCI\n");
 		return 0;
 	}
 
-	if (pcibios_scanned++)
-		return 0;
-
 	printk("PCI: Probing PCI hardware\n");
 	pci_root_bus = pcibios_scan_root(0);
 	if (pci_root_bus)
@@ -53,20 +36,39 @@ static int __init pci_legacy_init(void)
 	return 0;
 }
 
+void pcibios_scan_specific_bus(int busn)
+{
+	int devfn;
+	long node;
+	u32 l;
+
+	if (pci_find_bus(0, busn))
+		return;
+
+	node = get_mp_bus_to_node(busn);
+	for (devfn = 0; devfn < 256; devfn += 8) {
+		if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
+		    l != 0x0000 && l != 0xffff) {
+			DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
+			printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
+			pci_scan_bus_on_node(busn, &pci_root_ops, node);
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_specific_bus);
+
 int __init pci_subsys_init(void)
 {
-#ifdef CONFIG_X86_NUMAQ
-	pci_numaq_init();
-#endif
-#ifdef CONFIG_ACPI
-	pci_acpi_init();
-#endif
-#ifdef CONFIG_X86_VISWS
-	pci_visws_init();
-#endif
-	pci_legacy_init();
+	/*
+	 * The init function returns an non zero value when
+	 * pci_legacy_init should be invoked.
+	 */
+	if (x86_init.pci.init())
+		pci_legacy_init();
+
 	pcibios_fixup_peer_bridges();
-	pcibios_irq_init();
+	x86_init.pci.init_irq();
 	pcibios_init();
 
 	return 0;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index b19d1e5..a918553 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -16,6 +16,7 @@
 #include <linux/sfi_acpi.h>
 #include <linux/bitmap.h>
 #include <linux/dmi.h>
+#include <linux/slab.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
 #include <asm/acpi.h>
@@ -303,22 +304,17 @@ static void __init pci_mmcfg_check_end_bus_number(void)
 {
 	struct pci_mmcfg_region *cfg, *cfgx;
 
-	/* last one*/
-	cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list);
-	if (cfg)
-		if (cfg->end_bus < cfg->start_bus)
-			cfg->end_bus = 255;
-
-	if (list_is_singular(&pci_mmcfg_list))
-		return;
-
-	/* don't overlap please */
+	/* Fixup overlaps */
 	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
 		if (cfg->end_bus < cfg->start_bus)
 			cfg->end_bus = 255;
 
+		/* Don't access the list head ! */
+		if (cfg->list.next == &pci_mmcfg_list)
+			break;
+
 		cfgx = list_entry(cfg->list.next, typeof(*cfg), list);
-		if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus)
+		if (cfg->end_bus >= cfgx->start_bus)
 			cfg->end_bus = cfgx->start_bus - 1;
 	}
 }
@@ -487,16 +483,17 @@ static void __init pci_mmcfg_reject_broken(int early)
 	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
 		int valid = 0;
 
-		if (!early && !acpi_disabled)
+		if (!early && !acpi_disabled) {
 			valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0);
 
-		if (valid)
-			continue;
-
-		if (!early)
-			printk(KERN_ERR FW_BUG PREFIX
-			       "MMCONFIG at %pR not reserved in "
-			       "ACPI motherboard resources\n", &cfg->res);
+			if (valid)
+				continue;
+			else
+				printk(KERN_ERR FW_BUG PREFIX
+				       "MMCONFIG at %pR not reserved in "
+				       "ACPI motherboard resources\n",
+				       &cfg->res);
+		}
 
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 90d5fd4..a3d9c54 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -64,7 +64,7 @@ err:		*value = -1;
 	if (!base)
 		goto err;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	pci_exp_set_dev_base(base, bus, devfn);
 
@@ -79,7 +79,7 @@ err:		*value = -1;
 		*value = mmio_config_readl(mmcfg_virt_addr + reg);
 		break;
 	}
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -97,7 +97,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 	if (!base)
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	pci_exp_set_dev_base(base, bus, devfn);
 
@@ -112,7 +112,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 		mmio_config_writel(mmcfg_virt_addr + reg, value);
 		break;
 	}
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
new file mode 100644
index 0000000..cb29191
--- /dev/null
+++ b/arch/x86/pci/mrst.c
@@ -0,0 +1,267 @@
+/*
+ * Moorestown PCI support
+ *   Copyright (c) 2008 Intel Corporation
+ *     Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Moorestown has an interesting PCI implementation:
+ *   - configuration space is memory mapped (as defined by MCFG)
+ *   - Lincroft devices also have a real, type 1 configuration space
+ *   - Early Lincroft silicon has a type 1 access bug that will cause
+ *     a hang if non-existent devices are accessed
+ *   - some devices have the "fixed BAR" capability, which means
+ *     they can't be relocated or modified; check for that during
+ *     BAR sizing
+ *
+ * So, we use the MCFG space for all reads and writes, but also send
+ * Lincroft writes to type 1 space.  But only read/write if the device
+ * actually exists, otherwise return all 1s for reads and bit bucket
+ * the writes.
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+
+#include <asm/acpi.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/pci_x86.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+
+#define PCIE_CAP_OFFSET	0x100
+
+/* Fixed BAR fields */
+#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00	/* Fixed BAR (TBD) */
+#define PCI_FIXED_BAR_0_SIZE	0x04
+#define PCI_FIXED_BAR_1_SIZE	0x08
+#define PCI_FIXED_BAR_2_SIZE	0x0c
+#define PCI_FIXED_BAR_3_SIZE	0x10
+#define PCI_FIXED_BAR_4_SIZE	0x14
+#define PCI_FIXED_BAR_5_SIZE	0x1c
+
+/**
+ * fixed_bar_cap - return the offset of the fixed BAR cap if found
+ * @bus: PCI bus
+ * @devfn: device in question
+ *
+ * Look for the fixed BAR cap on @bus and @devfn, returning its offset
+ * if found or 0 otherwise.
+ */
+static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
+{
+	int pos;
+	u32 pcie_cap = 0, cap_data;
+
+	pos = PCIE_CAP_OFFSET;
+
+	if (!raw_pci_ext_ops)
+		return 0;
+
+	while (pos) {
+		if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					  devfn, pos, 4, &pcie_cap))
+			return 0;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
+			PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
+			break;
+
+		if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
+			raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+					      devfn, pos + 4, 4, &cap_data);
+			if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
+				return pos;
+		}
+
+		pos = PCI_EXT_CAP_NEXT(pcie_cap);
+	}
+
+	return 0;
+}
+
+static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
+				   int reg, int len, u32 val, int offset)
+{
+	u32 size;
+	unsigned int domain, busnum;
+	int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
+
+	domain = pci_domain_nr(bus);
+	busnum = bus->number;
+
+	if (val == ~0 && len == 4) {
+		unsigned long decode;
+
+		raw_pci_ext_ops->read(domain, busnum, devfn,
+			       offset + 8 + (bar * 4), 4, &size);
+
+		/* Turn the size into a decode pattern for the sizing code */
+		if (size) {
+			decode = size - 1;
+			decode |= decode >> 1;
+			decode |= decode >> 2;
+			decode |= decode >> 4;
+			decode |= decode >> 8;
+			decode |= decode >> 16;
+			decode++;
+			decode = ~(decode - 1);
+		} else {
+			decode = 0;
+		}
+
+		/*
+		 * If val is all ones, the core code is trying to size the reg,
+		 * so update the mmconfig space with the real size.
+		 *
+		 * Note: this assumes the fixed size we got is a power of two.
+		 */
+		return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
+				       decode);
+	}
+
+	/* This is some other kind of BAR write, so just do it. */
+	return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
+}
+
+/**
+ * type1_access_ok - check whether to use type 1
+ * @bus: bus number
+ * @devfn: device & function in question
+ *
+ * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
+ * all, the we can go ahead with any reads & writes.  If it's on a Lincroft,
+ * but doesn't exist, avoid the access altogether to keep the chip from
+ * hanging.
+ */
+static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
+{
+	/* This is a workaround for A0 LNC bug where PCI status register does
+	 * not have new CAP bit set. can not be written by SW either.
+	 *
+	 * PCI header type in real LNC indicates a single function device, this
+	 * will prevent probing other devices under the same function in PCI
+	 * shim. Therefore, use the header type in shim instead.
+	 */
+	if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
+		return 0;
+	if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0)))
+		return 1;
+	return 0; /* langwell on others */
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+		    int size, u32 *value)
+{
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
+					devfn, where, size, value);
+	return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
+			      devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+		     int size, u32 value)
+{
+	int offset;
+
+	/* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	 * to ROM BAR return 0 then being ignored.
+	 */
+	if (where == PCI_ROM_ADDRESS)
+		return 0;
+
+	/*
+	 * Devices with fixed BARs need special handling:
+	 *   - BAR sizing code will save, write ~0, read size, restore
+	 *   - so writes to fixed BARs need special handling
+	 *   - other writes to fixed BAR devices should go through mmconfig
+	 */
+	offset = fixed_bar_cap(bus, devfn);
+	if (offset &&
+	    (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
+		return pci_device_update_fixed(bus, devfn, where, size, value,
+					       offset);
+	}
+
+	/*
+	 * On Moorestown update both real & mmconfig space
+	 * Note: early Lincroft silicon can't handle type 1 accesses to
+	 *       non-existent devices, so just eat the write in that case.
+	 */
+	if (type1_access_ok(bus->number, devfn, where))
+		return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
+					      devfn, where, size, value);
+	return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
+			       where, size, value);
+}
+
+static int mrst_pci_irq_enable(struct pci_dev *dev)
+{
+	u8 pin;
+	struct io_apic_irq_attr irq_attr;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+	/* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	 * IOAPIC RTE entries, so we just enable RTE for the device.
+	 */
+	irq_attr.ioapic = mp_find_ioapic(dev->irq);
+	irq_attr.ioapic_pin = dev->irq;
+	irq_attr.trigger = 1; /* level */
+	irq_attr.polarity = 1; /* active low */
+	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+
+	return 0;
+}
+
+struct pci_ops pci_mrst_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+/**
+ * pci_mrst_init - installs pci_mrst_ops
+ *
+ * Moorestown has an interesting PCI implementation (see above).
+ * Called when the early platform detection installs it.
+ */
+int __init pci_mrst_init(void)
+{
+	printk(KERN_INFO "Moorestown platform detected, using MRST PCI ops\n");
+	pci_mmcfg_late_init();
+	pcibios_enable_irq = mrst_pci_irq_enable;
+	pci_root_ops = pci_mrst_ops;
+	/* Continue with standard init */
+	return 1;
+}
+
+/*
+ * Langwell devices reside at fixed offsets, don't try to move them.
+ */
+static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev)
+{
+	unsigned long offset;
+	u32 size;
+	int i;
+
+	/* Must have extended configuration space */
+	if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
+		return;
+
+	/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
+	offset = fixed_bar_cap(dev->bus, dev->devfn);
+	if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
+	    PCI_DEVFN(2, 2) == dev->devfn)
+		return;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+		pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
+		dev->resource[i].end = dev->resource[i].start + size - 1;
+		dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
index 8eb295e..5c9e245 100644
--- a/arch/x86/pci/numaq_32.c
+++ b/arch/x86/pci/numaq_32.c
@@ -8,9 +8,7 @@
 #include <asm/apic.h>
 #include <asm/mpspec.h>
 #include <asm/pci_x86.h>
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+#include <asm/numaq.h>
 
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
 
@@ -18,8 +16,6 @@
 
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
 
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
 #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
 	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
 
@@ -41,7 +37,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
 	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	write_cf8(bus, devfn, reg);
 
@@ -66,7 +62,7 @@ static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -80,7 +76,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
 	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	write_cf8(bus, devfn, reg);
 
@@ -105,7 +101,7 @@ static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return 0;
 }
@@ -152,14 +148,8 @@ int __init pci_numaq_init(void)
 {
 	int quad;
 
-	if (!found_numaq)
-		return 0;
-
 	raw_pci_ops = &pci_direct_conf1_mq;
 
-	if (pcibios_scanned++)
-		return 0;
-
 	pci_root_bus = pcibios_scan_root(0);
 	if (pci_root_bus)
 		pci_bus_add_devices(pci_root_bus);
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index b889d82..b348154 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = {
 
 int __init pci_olpc_init(void)
 {
-	if (!machine_is_olpc() || olpc_has_vsa())
-		return -ENODEV;
-
 	printk(KERN_INFO "PCI: Using configuration type OLPC\n");
 	raw_pci_ops = &pci_olpc_conf;
 	is_lx = is_geode_lx();
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 1c975cc..2492d16 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -4,6 +4,7 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
 #include <asm/pci_x86.h>
@@ -161,7 +162,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 	if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	switch (len) {
 	case 1:
@@ -212,7 +213,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return (int)((result & 0xff00) >> 8);
 }
@@ -227,7 +228,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
 	if ((bus > 255) || (devfn > 255) || (reg > 255)) 
 		return -EINVAL;
 
-	spin_lock_irqsave(&pci_config_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 
 	switch (len) {
 	case 1:
@@ -268,7 +269,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
 		break;
 	}
 
-	spin_unlock_irqrestore(&pci_config_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return (int)((result & 0xff00) >> 8);
 }
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index bcead7a..03008f7 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -69,9 +69,6 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 
 int __init pci_visws_init(void)
 {
-	if (!is_visws_box())
-		return -1;
-
 	pcibios_enable_irq = &pci_visws_enable_irq;
 	pcibios_disable_irq = &pci_visws_disable_irq;
 
@@ -90,5 +87,6 @@ int __init pci_visws_init(void)
 	pci_scan_bus_with_sysdata(pci_bus1);
 	pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
 	pcibios_resource_survey();
-	return 0;
+	/* Request bus scan */
+	return 1;
 }
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 0a979f3..1290ba5 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -105,6 +105,8 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
 #endif
+	ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
+					       &ctxt->misc_enable);
 }
 
 /* Needed by apm.c */
@@ -152,6 +154,8 @@ static void fix_processor_context(void)
  */
 static void __restore_processor_state(struct saved_context *ctxt)
 {
+	if (ctxt->misc_enable_saved)
+		wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
 	/*
 	 * control registers
 	 */
diff --git a/arch/x86/power/hibernate_32.c b/arch/x86/power/hibernate_32.c
index 81197c6..3769079 100644
--- a/arch/x86/power/hibernate_32.c
+++ b/arch/x86/power/hibernate_32.c
@@ -6,6 +6,7 @@
  * Copyright (c) 2006 Rafael J. Wysocki <rjw@sisk.pl>
  */
 
+#include <linux/gfp.h>
 #include <linux/suspend.h>
 #include <linux/bootmem.h>
 
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index 65fdc86..d24f983 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -8,6 +8,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/gfp.h>
 #include <linux/smp.h>
 #include <linux/suspend.h>
 #include <asm/proto.h>
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index b641388..ad47dae 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -27,10 +27,17 @@ ENTRY(swsusp_arch_suspend)
 	ret
 
 ENTRY(restore_image)
+	movl	mmu_cr4_features, %ecx
 	movl	resume_pg_dir, %eax
 	subl	$__PAGE_OFFSET, %eax
 	movl	%eax, %cr3
 
+	jecxz	1f	# cr4 Pentium and higher, skip if zero
+	andl	$~(X86_CR4_PGE), %ecx
+	movl	%ecx, %cr4;  # turn off PGE
+	movl	%cr3, %eax;  # flush TLB
+	movl	%eax, %cr3
+1:
 	movl	restore_pblist, %edx
 	.p2align 4,,7
 
@@ -54,16 +61,8 @@ done:
 	movl	$swapper_pg_dir, %eax
 	subl	$__PAGE_OFFSET, %eax
 	movl	%eax, %cr3
-	/* Flush TLB, including "global" things (vmalloc) */
 	movl	mmu_cr4_features, %ecx
 	jecxz	1f	# cr4 Pentium and higher, skip if zero
-	movl	%ecx, %edx
-	andl	$~(X86_CR4_PGE), %edx
-	movl	%edx, %cr4;  # turn off PGE
-1:
-	movl	%cr3, %eax;  # flush TLB
-	movl	%eax, %cr3
-	jecxz	1f	# cr4 Pentium and higher, skip if zero
 	movl	%ecx, %cr4;  # turn PGE back on
 1:
 
diff --git a/arch/x86/tools/test_get_len.c b/arch/x86/tools/test_get_len.c
index bee8d6a..13403fc 100644
--- a/arch/x86/tools/test_get_len.c
+++ b/arch/x86/tools/test_get_len.c
@@ -43,7 +43,7 @@ static int x86_64;
 static void usage(void)
 {
 	fprintf(stderr, "Usage: objdump -d a.out | awk -f distill.awk |"
-		" %s [-y|-n] [-v] \n", prog);
+		" %s [-y|-n] [-v]\n", prog);
 	fprintf(stderr, "\t-y	64bit mode\n");
 	fprintf(stderr, "\t-n	32bit mode\n");
 	fprintf(stderr, "\t-v	verbose mode\n");
@@ -69,7 +69,7 @@ static void dump_field(FILE *fp, const char *name, const char *indent,
 
 static void dump_insn(FILE *fp, struct insn *insn)
 {
-	fprintf(fp, "Instruction = { \n");
+	fprintf(fp, "Instruction = {\n");
 	dump_field(fp, "prefixes", "\t",	&insn->prefixes);
 	dump_field(fp, "rex_prefix", "\t",	&insn->rex_prefix);
 	dump_field(fp, "vex_prefix", "\t",	&insn->vex_prefix);
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 21e1aeb..ac74869 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -6,6 +6,7 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/random.h>
 #include <linux/elf.h>
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index e133ce2..1304bce 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -1,5 +1,6 @@
 #include <linux/init.h>
 #include <linux/debugfs.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 
 #include "debugfs.h"
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 36daccb..65d8d79 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -28,6 +28,7 @@
 #include <linux/highmem.h>
 #include <linux/console.h>
 #include <linux/pci.h>
+#include <linux/gfp.h>
 
 #include <xen/xen.h>
 #include <xen/interface/xen.h>
@@ -50,6 +51,7 @@
 #include <asm/traps.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
+#include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
@@ -1094,6 +1096,12 @@ asmlinkage void __init xen_start_kernel(void)
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
+	/*
+	 * Prevent page tables from being allocated in highmem, even
+	 * if CONFIG_HIGHPTE is enabled.
+	 */
+	__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+
 	/* Work out if we support NX */
 	x86_configure_nx();
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index bf4cd6b..914f046 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -43,6 +43,7 @@
 #include <linux/debugfs.h>
 #include <linux/bug.h>
 #include <linux/module.h>
+#include <linux/gfp.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@@ -1427,23 +1428,6 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 #endif
 }
 
-#ifdef CONFIG_HIGHPTE
-static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
-{
-	pgprot_t prot = PAGE_KERNEL;
-
-	if (PagePinned(page))
-		prot = PAGE_KERNEL_RO;
-
-	if (0 && PageHighMem(page))
-		printk("mapping highpte %lx type %d prot %s\n",
-		       page_to_pfn(page), type,
-		       (unsigned long)pgprot_val(prot) & _PAGE_RW ? "WRITE" : "READ");
-
-	return kmap_atomic_prot(page, type, prot);
-}
-#endif
-
 #ifdef CONFIG_X86_32
 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 {
@@ -1902,10 +1886,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.alloc_pmd_clone = paravirt_nop,
 	.release_pmd = xen_release_pmd_init,
 
-#ifdef CONFIG_HIGHPTE
-	.kmap_atomic_pte = xen_kmap_atomic_pte,
-#endif
-
 #ifdef CONFIG_X86_64
 	.set_pte = xen_set_pte,
 #else
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 563d205..a29693f 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -14,6 +14,7 @@
  */
 #include <linux/sched.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/smp.h>
 
 #include <asm/paravirt.h>
@@ -361,7 +362,7 @@ static void xen_cpu_die(unsigned int cpu)
 		alternatives_smp_switch(0);
 }
 
-static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
+static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
 {
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 24ded31..e0500646 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/debugfs.h>
 #include <linux/log2.h>
+#include <linux/gfp.h>
 
 #include <asm/paravirt.h>
 
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 987267f..a9c6611 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -60,6 +60,6 @@ static void xen_vcpu_notify_restore(void *data)
 
 void xen_arch_resume(void)
 {
-	smp_call_function(xen_vcpu_notify_restore,
-			       (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
+	on_each_cpu(xen_vcpu_notify_restore,
+		    (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
 }
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 0d3f07c..b3c6c59 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -13,6 +13,7 @@
 #include <linux/clockchips.h>
 #include <linux/kernel_stat.h>
 #include <linux/math64.h>
+#include <linux/gfp.h>
 
 #include <asm/pvclock.h>
 #include <asm/xen/hypervisor.h>
@@ -475,6 +476,7 @@ void xen_timer_resume(void)
 __init void xen_time_init(void)
 {
 	int cpu = smp_processor_id();
+	struct timespec tp;
 
 	clocksource_register(&xen_clocksource);
 
@@ -486,9 +488,8 @@ __init void xen_time_init(void)
 	}
 
 	/* Set initial system time with full resolution */
-	xen_read_wallclock(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
+	xen_read_wallclock(&tp);
+	do_settimeofday(&tp);
 
 	setup_force_cpu_cap(X86_FEATURE_TSC);
 
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 88e15de..22a2093 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -90,9 +90,9 @@ ENTRY(xen_iret)
 	GET_THREAD_INFO(%eax)
 	movl TI_cpu(%eax), %eax
 	movl __per_cpu_offset(,%eax,4), %eax
-	mov per_cpu__xen_vcpu(%eax), %eax
+	mov xen_vcpu(%eax), %eax
 #else
-	movl per_cpu__xen_vcpu, %eax
+	movl xen_vcpu, %eax
 #endif
 
 	/* check IF state we're restoring */
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index 22d6dde..a96a061 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -46,7 +46,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable
diff --git a/arch/xtensa/include/asm/cache.h b/arch/xtensa/include/asm/cache.h
index f04c989..ed8cd3c 100644
--- a/arch/xtensa/include/asm/cache.h
+++ b/arch/xtensa/include/asm/cache.h
@@ -29,5 +29,6 @@
 # define CACHE_WAY_SIZE ICACHE_WAY_SIZE
 #endif
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
 #endif	/* _XTENSA_CACHE_H */
diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h
index 87cb19d..26664ce 100644
--- a/arch/xtensa/include/asm/hardirq.h
+++ b/arch/xtensa/include/asm/hardirq.h
@@ -11,18 +11,9 @@
 #ifndef _XTENSA_HARDIRQ_H
 #define _XTENSA_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <asm/irq.h>
-
-/* headers.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned int __syscall_count;
-	struct task_struct * __ksoftirqd_task; /* waitqueue is too large */
-	unsigned int __nmi_count;	       /* arch dependent */
-} ____cacheline_aligned irq_cpustat_t;
-
 void ack_bad_irq(unsigned int irq);
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif	/* _XTENSA_HARDIRQ_H */
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index 66410ac..4609b0f 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -56,14 +56,6 @@ struct pci_dev;
 
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-/* pci_unmap_{page,single} is a no-op, so */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_ubnmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 /* Map a range of PCI memory or I/O space for a device into user space */
 int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
                         enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index a138770..76bf355 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -394,7 +394,7 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 #define kern_addr_valid(addr)	(1)
 
 extern  void update_mmu_cache(struct vm_area_struct * vma,
-			      unsigned long address, pte_t pte);
+			      unsigned long address, pte_t *ptep);
 
 /*
  * remap a physical page `pfn' of size `size' with page protection `prot'
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index 905e1e6..3c549f7 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -113,6 +113,7 @@ struct pt_regs {
 
 #include <variant/core.h>
 
+# define arch_has_single_step()	(1)
 # define task_pt_regs(tsk) ((struct pt_regs*) \
   (task_stack_page(tsk) + KERNEL_STACK_SIZE - (XCHAL_NUM_AREGS-16)*4) - 1)
 # define user_mode(regs) (((regs)->ps & 0x00000020)!=0)
diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h
index 810080b..b1f9fdc 100644
--- a/arch/xtensa/include/asm/scatterlist.h
+++ b/arch/xtensa/include/asm/scatterlist.h
@@ -11,28 +11,7 @@
 #ifndef _XTENSA_SCATTERLIST_H
 #define _XTENSA_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (~0UL)
 
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 1316564..7be8acc 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -129,7 +129,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
 #define TIF_IRET		4	/* return with iret */
-#define TIF_MEMDIE		5
+#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_FREEZE		17	/* is freezing for suspend */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c4..77fc9f6 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(user_exception)
@@ -244,7 +244,7 @@ _user_exception:
  *   excsave has been restored, and
  *   stack pointer (a1) has been set.
  *
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
  */
 
 ENTRY(kernel_exception)
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index 8cd3848..c64a5d3 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -27,15 +27,6 @@ static unsigned int cached_irq_mask;
 atomic_t irq_err_count;
 
 /*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-          printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
-/*
  * do_IRQ handles all normal device IRQ's (the special
  * SMP cross-CPU interrupts have their own specific
  * handlers).
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index f5319d7..2783fda 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/string.h>
 #include <linux/pci.h>
+#include <linux/gfp.h>
 #include <asm/io.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
index b7c0734..cd10269 100644
--- a/arch/xtensa/kernel/pci.c
+++ b/arch/xtensa/kernel/pci.c
@@ -69,26 +69,25 @@ static int pci_bus_count;
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void
-pcibios_align_resource(void *data, struct resource *res, resource_size_t size,
-    		       resource_size_t align)
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (size > 0x100) {
 			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
 			       " (%ld bytes)\n", pci_name(dev),
 			       dev->resource - res, size);
 		}
 
-		if (start & 0x300) {
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+
+	return start;
 }
 
 int
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index e1a04a3..f167e0f 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -23,7 +23,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/elf.h>
 #include <linux/init.h>
 #include <linux/prctl.h>
@@ -31,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/mqueue.h>
 #include <linux/fs.h>
+#include <linux/slab.h>
 
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 9486882..9d4e1ce 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -30,6 +30,17 @@
 #include <asm/elf.h>
 #include <asm/coprocessor.h>
 
+
+void user_enable_single_step(struct task_struct *child)
+{
+	child->ptrace |= PT_SINGLESTEP;
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	child->ptrace &= ~PT_SINGLESTEP;
+}
+
 /*
  * Called by kernel/ptrace.c when detaching to disable single stepping.
  */
@@ -268,51 +279,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		ret = ptrace_pokeusr(child, addr, data);
 		break;
 
-	/* continue and stop at next (return from) syscall */
-
-	case PTRACE_SYSCALL:
-	case PTRACE_CONT: /* restart after signal. */
-	{
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		/* Make sure the single step bit is not set. */
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		child->ptrace &= ~PT_SINGLESTEP;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace |= PT_SINGLESTEP;
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-
 	case PTRACE_GETREGS:
 		ret = ptrace_getregs(child, (void __user *) data);
 		break;
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 19f7df3..19df764 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -60,11 +60,6 @@ static struct irqaction timer_irqaction = {
 
 void __init time_init(void)
 {
-	/* FIXME: xtime&wall_to_monotonic are set in timekeeping_init. */
-	read_persistent_clock(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
-
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 	printk("Calibrating CPU frequency ");
 	platform_calibrate_ccount();
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 74a7518..70066e3 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -44,14 +44,12 @@
 
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
-#include <asm/ptrace.h>
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/thread_info.h>
-#include <asm/processor.h>
 
 #define WINDOW_VECTORS_SIZE   0x180
 
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index 3ba990c..85df465 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -147,9 +147,9 @@ void flush_cache_page(struct vm_area_struct* vma, unsigned long address,
 #endif
 
 void
-update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte)
+update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
 {
-	unsigned long pfn = pte_pfn(pte);
+	unsigned long pfn = pte_pfn(*ptep);
 	struct page *page;
 
 	if (!pfn_valid(pfn))
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index bc07333..e367e30 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -105,7 +105,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -146,15 +145,10 @@ bad_area:
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	bad_page_fault(regs, address, SIGKILL);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
 	return;
 
 do_sigbus:
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index cdbc27c..ba150e5 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -18,11 +18,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 #include <linux/swap.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 
 #include <asm/bootparam.h>
 #include <asm/page.h>
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index e60a1f5..2c723e8 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -14,7 +14,6 @@
 #include <linux/sched.h>
 #include <linux/console.h>
 #include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/major.h>
 #include <linux/param.h>
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 2f0b86b..87e218f 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -560,7 +560,7 @@ static void iss_net_set_multicast_list(struct net_device *dev)
 #if 0
 	if (dev->flags & IFF_PROMISC)
 		return;
-	else if (dev->mc_count)
+	else if (!netdev_mc_empty(dev))
 		dev->flags |= IFF_ALLMULTI;
 	else
 		dev->flags &= ~IFF_ALLMULTI;